From 14d2bac1877ed4e2cc940d1680db1a4f29225811 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 2 Apr 2006 17:54:46 +0900 Subject: [PATCH] libata: improve ata_bus_probe() Improve ata_bus_probe() such that configuration failures are handled better. Each device is given ATA_PROBE_MAX_TRIES chances, but any non-transient error (revalidation failure with -ENODEV, configuration failure with -EINVAL...) disables the device directly. Any IO error results in SATA PHY speed down and ata_set_mode() failure lowers transfer mode. The last try always puts a device into PIO-0. After each failure, the whole port is reset to make sure that the controller and all the devices are in a known and stable state. The reset also applies SATA SPD configuration if necessary. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 65 ++++++++++++++++++++++++++++++++++------------ 1 file changed, 49 insertions(+), 16 deletions(-) (limited to 'drivers/scsi/libata-core.c') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 68fa64d24721..33b5bff58cc3 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1370,11 +1370,18 @@ err_out_nosup: static int ata_bus_probe(struct ata_port *ap) { unsigned int classes[ATA_MAX_DEVICES]; - int i, rc, found = 0; + int tries[ATA_MAX_DEVICES]; + int i, rc, down_xfermask; struct ata_device *dev; ata_port_probe(ap); + for (i = 0; i < ATA_MAX_DEVICES; i++) + tries[i] = ATA_PROBE_MAX_TRIES; + + retry: + down_xfermask = 0; + /* reset and determine device classes */ for (i = 0; i < ATA_MAX_DEVICES; i++) classes[i] = ATA_DEV_UNKNOWN; @@ -1404,21 +1411,23 @@ static int ata_bus_probe(struct ata_port *ap) dev = &ap->device[i]; dev->class = classes[i]; - if (!ata_dev_enabled(dev)) - continue; - - WARN_ON(dev->id != NULL); - if (ata_dev_read_id(ap, dev, &dev->class, 1, &dev->id)) { - dev->class = ATA_DEV_NONE; - continue; + if (!tries[i]) { + ata_down_xfermask_limit(ap, dev, 1); + ata_dev_disable(ap, dev); } - if (ata_dev_configure(ap, dev, 1)) { - ata_dev_disable(ap, dev); + if (!ata_dev_enabled(dev)) continue; - } - found = 1; + kfree(dev->id); + dev->id = NULL; + rc = ata_dev_read_id(ap, dev, &dev->class, 1, &dev->id); + if (rc) + goto fail; + + rc = ata_dev_configure(ap, dev, 1); + if (rc) + goto fail; } /* configure transfer mode */ @@ -1427,12 +1436,18 @@ static int ata_bus_probe(struct ata_port *ap) * return error code and failing device on failure as * ata_set_mode() does. */ - if (found) - ap->ops->set_mode(ap); + for (i = 0; i < ATA_MAX_DEVICES; i++) + if (ata_dev_enabled(&ap->device[i])) { + ap->ops->set_mode(ap); + break; + } rc = 0; } else { - while (ata_set_mode(ap, &dev)) - ata_dev_disable(ap, dev); + rc = ata_set_mode(ap, &dev); + if (rc) { + down_xfermask = 1; + goto fail; + } } for (i = 0; i < ATA_MAX_DEVICES; i++) @@ -1443,6 +1458,24 @@ static int ata_bus_probe(struct ata_port *ap) ata_port_disable(ap); ap->ops->port_disable(ap); return -ENODEV; + + fail: + switch (rc) { + case -EINVAL: + case -ENODEV: + tries[dev->devno] = 0; + break; + case -EIO: + ata_down_sata_spd_limit(ap); + /* fall through */ + default: + tries[dev->devno]--; + if (down_xfermask && + ata_down_xfermask_limit(ap, dev, tries[dev->devno] == 1)) + tries[dev->devno] = 0; + } + + goto retry; } /** -- cgit v1.2.2