From c1d288a58936cd0654844d807e53a203f4838fb4 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 16 Aug 2009 11:17:35 +0200 Subject: m68k: amiga - GVP Series II SCSI zorro_driver conversion Acked-by: James Bottomley Signed-off-by: Geert Uytterhoeven --- drivers/scsi/gvp11.c | 298 +++++++++++++++++++++++++++------------------------ 1 file changed, 156 insertions(+), 142 deletions(-) (limited to 'drivers/scsi/gvp11.c') diff --git a/drivers/scsi/gvp11.c b/drivers/scsi/gvp11.c index 874cbee1be23..4507a16ee1c6 100644 --- a/drivers/scsi/gvp11.c +++ b/drivers/scsi/gvp11.c @@ -1,26 +1,20 @@ #include -#include -#include -#include #include #include +#include +#include +#include +#include -#include #include #include #include #include -#include -#include -#include #include "scsi.h" -#include #include "wd33c93.h" #include "gvp11.h" -#include - #define CHECK_WD33C93 @@ -169,7 +163,40 @@ static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt, } } -static int __init check_wd33c93(struct gvp11_scsiregs *regs) +static int gvp11_bus_reset(struct scsi_cmnd *cmd) +{ + struct Scsi_Host *instance = cmd->device->host; + + /* FIXME perform bus-specific reset */ + + /* FIXME 2: shouldn't we no-op this function (return + FAILED), and fall back to host reset function, + wd33c93_host_reset ? */ + + spin_lock_irq(instance->host_lock); + wd33c93_host_reset(cmd); + spin_unlock_irq(instance->host_lock); + + return SUCCESS; +} + +static struct scsi_host_template gvp11_scsi_template = { + .module = THIS_MODULE, + .name = "GVP Series II SCSI", + .proc_info = wd33c93_proc_info, + .proc_name = "GVP11", + .queuecommand = wd33c93_queuecommand, + .eh_abort_handler = wd33c93_abort, + .eh_bus_reset_handler = gvp11_bus_reset, + .eh_host_reset_handler = wd33c93_host_reset, + .can_queue = CAN_QUEUE, + .this_id = 7, + .sg_tablesize = SG_ALL, + .cmd_per_lun = CMD_PER_LUN, + .use_clustering = DISABLE_CLUSTERING +}; + +static int __devinit check_wd33c93(struct gvp11_scsiregs *regs) { #ifdef CHECK_WD33C93 volatile unsigned char *sasr_3393, *scmd_3393; @@ -249,163 +276,150 @@ static int __init check_wd33c93(struct gvp11_scsiregs *regs) return 0; } -int __init gvp11_detect(struct scsi_host_template *tpnt) +static int __devinit gvp11_probe(struct zorro_dev *z, + const struct zorro_device_id *ent) { - static unsigned char called = 0; struct Scsi_Host *instance; unsigned long address; + int error; unsigned int epc; - struct zorro_dev *z = NULL; unsigned int default_dma_xfer_mask; struct WD33C93_hostdata *hdata; struct gvp11_scsiregs *regs; wd33c93_regs wdregs; - int num_gvp11 = 0; - - if (!MACH_IS_AMIGA || called) - return 0; - called = 1; - - tpnt->proc_name = "GVP11"; - tpnt->proc_info = &wd33c93_proc_info; - - while ((z = zorro_find_device(ZORRO_WILDCARD, z))) { - /* - * This should (hopefully) be the correct way to identify - * all the different GVP SCSI controllers (except for the - * SERIES I though). - */ - - if (z->id == ZORRO_PROD_GVP_COMBO_030_R3_SCSI || - z->id == ZORRO_PROD_GVP_SERIES_II) - default_dma_xfer_mask = ~0x00ffffff; - else if (z->id == ZORRO_PROD_GVP_GFORCE_030_SCSI || - z->id == ZORRO_PROD_GVP_A530_SCSI || - z->id == ZORRO_PROD_GVP_COMBO_030_R4_SCSI) - default_dma_xfer_mask = ~0x01ffffff; - else if (z->id == ZORRO_PROD_GVP_A1291 || - z->id == ZORRO_PROD_GVP_GFORCE_040_SCSI_1) - default_dma_xfer_mask = ~0x07ffffff; - else - continue; - - /* - * Rumors state that some GVP ram boards use the same product - * code as the SCSI controllers. Therefore if the board-size - * is not 64KB we asume it is a ram board and bail out. - */ - if (z->resource.end - z->resource.start != 0xffff) - continue; - - address = z->resource.start; - if (!request_mem_region(address, 256, "wd33c93")) - continue; - - regs = (struct gvp11_scsiregs *)(ZTWO_VADDR(address)); - if (check_wd33c93(regs)) - goto release; - - instance = scsi_register(tpnt, sizeof(struct WD33C93_hostdata)); - if (instance == NULL) - goto release; - instance->base = ZTWO_VADDR(address); - instance->irq = IRQ_AMIGA_PORTS; - instance->unique_id = z->slotaddr; - - hdata = shost_priv(instance); - if (gvp11_xfer_mask) - hdata->dma_xfer_mask = gvp11_xfer_mask; - else - hdata->dma_xfer_mask = default_dma_xfer_mask; - - regs->secret2 = 1; - regs->secret1 = 0; - regs->secret3 = 15; - while (regs->CNTR & GVP11_DMAC_BUSY) - ; - regs->CNTR = 0; - - regs->BANK = 0; - - epc = *(unsigned short *)(ZTWO_VADDR(address) + 0x8000); - - /* - * Check for 14MHz SCSI clock - */ - wdregs.SASR = ®s->SASR; - wdregs.SCMD = ®s->SCMD; - hdata->no_sync = 0xff; - hdata->fast = 0; - hdata->dma_mode = CTRL_DMA; - wd33c93_init(instance, wdregs, dma_setup, dma_stop, - (epc & GVP_SCSICLKMASK) ? WD33C93_FS_8_10 - : WD33C93_FS_12_15); - - if (request_irq(IRQ_AMIGA_PORTS, gvp11_intr, IRQF_SHARED, - "GVP11 SCSI", instance)) - goto unregister; - regs->CNTR = GVP11_DMAC_INT_ENABLE; - num_gvp11++; - continue; - -unregister: - scsi_unregister(instance); -release: - release_mem_region(address, 256); + + default_dma_xfer_mask = ent->driver_data; + + /* + * Rumors state that some GVP ram boards use the same product + * code as the SCSI controllers. Therefore if the board-size + * is not 64KB we asume it is a ram board and bail out. + */ + if (zorro_resource_len(z) != 0x10000) + return -ENODEV; + + address = z->resource.start; + if (!request_mem_region(address, 256, "wd33c93")) + return -EBUSY; + + regs = (struct gvp11_scsiregs *)(ZTWO_VADDR(address)); + + error = check_wd33c93(regs); + if (error) + goto fail_check_or_alloc; + + instance = scsi_host_alloc(&gvp11_scsi_template, + sizeof(struct WD33C93_hostdata)); + if (!instance) { + error = -ENOMEM; + goto fail_check_or_alloc; } - return num_gvp11; -} + instance->base = (unsigned long)regs; + instance->irq = IRQ_AMIGA_PORTS; + instance->unique_id = z->slotaddr; -static int gvp11_bus_reset(struct scsi_cmnd *cmd) -{ - /* FIXME perform bus-specific reset */ + regs->secret2 = 1; + regs->secret1 = 0; + regs->secret3 = 15; + while (regs->CNTR & GVP11_DMAC_BUSY) + ; + regs->CNTR = 0; + regs->BANK = 0; - /* FIXME 2: shouldn't we no-op this function (return - FAILED), and fall back to host reset function, - wd33c93_host_reset ? */ + wdregs.SASR = ®s->SASR; + wdregs.SCMD = ®s->SCMD; - spin_lock_irq(cmd->device->host->host_lock); - wd33c93_host_reset(cmd); - spin_unlock_irq(cmd->device->host->host_lock); + hdata = shost_priv(instance); + if (gvp11_xfer_mask) + hdata->dma_xfer_mask = gvp11_xfer_mask; + else + hdata->dma_xfer_mask = default_dma_xfer_mask; - return SUCCESS; -} + hdata->no_sync = 0xff; + hdata->fast = 0; + hdata->dma_mode = CTRL_DMA; + /* + * Check for 14MHz SCSI clock + */ + epc = *(unsigned short *)(ZTWO_VADDR(address) + 0x8000); + wd33c93_init(instance, wdregs, dma_setup, dma_stop, + (epc & GVP_SCSICLKMASK) ? WD33C93_FS_8_10 + : WD33C93_FS_12_15); -#define HOSTS_C + error = request_irq(IRQ_AMIGA_PORTS, gvp11_intr, IRQF_SHARED, + "GVP11 SCSI", instance); + if (error) + goto fail_irq; -#include "gvp11.h" + regs->CNTR = GVP11_DMAC_INT_ENABLE; -static struct scsi_host_template driver_template = { - .proc_name = "GVP11", - .name = "GVP Series II SCSI", - .detect = gvp11_detect, - .release = gvp11_release, - .queuecommand = wd33c93_queuecommand, - .eh_abort_handler = wd33c93_abort, - .eh_bus_reset_handler = gvp11_bus_reset, - .eh_host_reset_handler = wd33c93_host_reset, - .can_queue = CAN_QUEUE, - .this_id = 7, - .sg_tablesize = SG_ALL, - .cmd_per_lun = CMD_PER_LUN, - .use_clustering = DISABLE_CLUSTERING -}; + error = scsi_add_host(instance, NULL); + if (error) + goto fail_host; + zorro_set_drvdata(z, instance); + scsi_scan_host(instance); + return 0; -#include "scsi_module.c" +fail_host: + free_irq(IRQ_AMIGA_PORTS, instance); +fail_irq: + scsi_host_put(instance); +fail_check_or_alloc: + release_mem_region(address, 256); + return error; +} -int gvp11_release(struct Scsi_Host *instance) +static void __devexit gvp11_remove(struct zorro_dev *z) { -#ifdef MODULE + struct Scsi_Host *instance = zorro_get_drvdata(z); struct gvp11_scsiregs *regs = (struct gvp11_scsiregs *)(instance->base); regs->CNTR = 0; - release_mem_region(ZTWO_PADDR(instance->base), 256); + scsi_remove_host(instance); free_irq(IRQ_AMIGA_PORTS, instance); -#endif - return 1; + scsi_host_put(instance); + release_mem_region(z->resource.start, 256); +} + + /* + * This should (hopefully) be the correct way to identify + * all the different GVP SCSI controllers (except for the + * SERIES I though). + */ + +static struct zorro_device_id gvp11_zorro_tbl[] __devinitdata = { + { ZORRO_PROD_GVP_COMBO_030_R3_SCSI, ~0x00ffffff }, + { ZORRO_PROD_GVP_SERIES_II, ~0x00ffffff }, + { ZORRO_PROD_GVP_GFORCE_030_SCSI, ~0x01ffffff }, + { ZORRO_PROD_GVP_A530_SCSI, ~0x01ffffff }, + { ZORRO_PROD_GVP_COMBO_030_R4_SCSI, ~0x01ffffff }, + { ZORRO_PROD_GVP_A1291, ~0x07ffffff }, + { ZORRO_PROD_GVP_GFORCE_040_SCSI_1, ~0x07ffffff }, + { 0 } +}; +MODULE_DEVICE_TABLE(zorro, gvp11_zorro_tbl); + +static struct zorro_driver gvp11_driver = { + .name = "gvp11", + .id_table = gvp11_zorro_tbl, + .probe = gvp11_probe, + .remove = __devexit_p(gvp11_remove), +}; + +static int __init gvp11_init(void) +{ + return zorro_register_driver(&gvp11_driver); +} +module_init(gvp11_init); + +static void __exit gvp11_exit(void) +{ + zorro_unregister_driver(&gvp11_driver); } +module_exit(gvp11_exit); +MODULE_DESCRIPTION("GVP Series II SCSI"); MODULE_LICENSE("GPL"); -- cgit v1.2.2