From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/scsi/ata_piix.c | 690 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 690 insertions(+) create mode 100644 drivers/scsi/ata_piix.c (limited to 'drivers/scsi/ata_piix.c') diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c new file mode 100644 index 000000000000..ce19728aa8a4 --- /dev/null +++ b/drivers/scsi/ata_piix.c @@ -0,0 +1,690 @@ +/* + + ata_piix.c - Intel PATA/SATA controllers + + Maintained by: Jeff Garzik + Please ALWAYS copy linux-ide@vger.kernel.org + on emails. + + + Copyright 2003-2004 Red Hat Inc + Copyright 2003-2004 Jeff Garzik + + + Copyright header from piix.c: + + Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer + Copyright (C) 1998-2000 Andre Hedrick + Copyright (C) 2003 Red Hat Inc + + May be copied or modified under the terms of the GNU General Public License + + */ + +#include +#include +#include +#include +#include +#include +#include "scsi.h" +#include +#include + +#define DRV_NAME "ata_piix" +#define DRV_VERSION "1.03" + +enum { + PIIX_IOCFG = 0x54, /* IDE I/O configuration register */ + ICH5_PMR = 0x90, /* port mapping register */ + ICH5_PCS = 0x92, /* port control and status */ + + PIIX_FLAG_AHCI = (1 << 28), /* AHCI possible */ + PIIX_FLAG_CHECKINTR = (1 << 29), /* make sure PCI INTx enabled */ + PIIX_FLAG_COMBINED = (1 << 30), /* combined mode possible */ + + /* combined mode. if set, PATA is channel 0. + * if clear, PATA is channel 1. + */ + PIIX_COMB_PATA_P0 = (1 << 1), + PIIX_COMB = (1 << 2), /* combined mode enabled? */ + + PIIX_PORT_PRESENT = (1 << 0), + PIIX_PORT_ENABLED = (1 << 4), + + PIIX_80C_PRI = (1 << 5) | (1 << 4), + PIIX_80C_SEC = (1 << 7) | (1 << 6), + + ich5_pata = 0, + ich5_sata = 1, + piix4_pata = 2, + ich6_sata = 3, + ich6_sata_rm = 4, + ich7_sata = 5, +}; + +static int piix_init_one (struct pci_dev *pdev, + const struct pci_device_id *ent); + +static void piix_pata_phy_reset(struct ata_port *ap); +static void piix_sata_phy_reset(struct ata_port *ap); +static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev); +static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev); + +static unsigned int in_module_init = 1; + +static struct pci_device_id piix_pci_tbl[] = { +#ifdef ATA_ENABLE_PATA + { 0x8086, 0x7111, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix4_pata }, + { 0x8086, 0x24db, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_pata }, + { 0x8086, 0x25a2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_pata }, +#endif + + /* NOTE: The following PCI ids must be kept in sync with the + * list in drivers/pci/quirks.c. + */ + + { 0x8086, 0x24d1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata }, + { 0x8086, 0x24df, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata }, + { 0x8086, 0x25a3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata }, + { 0x8086, 0x25b0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata }, + { 0x8086, 0x2651, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata }, + { 0x8086, 0x2652, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_rm }, + { 0x8086, 0x2653, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_rm }, + { 0x8086, 0x27c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich7_sata }, + { 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich7_sata }, + + { } /* terminate list */ +}; + +static struct pci_driver piix_pci_driver = { + .name = DRV_NAME, + .id_table = piix_pci_tbl, + .probe = piix_init_one, + .remove = ata_pci_remove_one, +}; + +static Scsi_Host_Template piix_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .eh_strategy_handler = ata_scsi_error, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, + .ordered_flush = 1, +}; + +static struct ata_port_operations piix_pata_ops = { + .port_disable = ata_port_disable, + .set_piomode = piix_set_piomode, + .set_dmamode = piix_set_dmamode, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .phy_reset = piix_pata_phy_reset, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + + .eng_timeout = ata_eng_timeout, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, +}; + +static struct ata_port_operations piix_sata_ops = { + .port_disable = ata_port_disable, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .phy_reset = piix_sata_phy_reset, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + + .eng_timeout = ata_eng_timeout, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, +}; + +static struct ata_port_info piix_port_info[] = { + /* ich5_pata */ + { + .sht = &piix_sht, + .host_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | + PIIX_FLAG_CHECKINTR, + .pio_mask = 0x1f, /* pio0-4 */ +#if 0 + .mwdma_mask = 0x06, /* mwdma1-2 */ +#else + .mwdma_mask = 0x00, /* mwdma broken */ +#endif + .udma_mask = 0x3f, /* udma0-5 */ + .port_ops = &piix_pata_ops, + }, + + /* ich5_sata */ + { + .sht = &piix_sht, + .host_flags = ATA_FLAG_SATA | ATA_FLAG_SRST | + PIIX_FLAG_COMBINED | PIIX_FLAG_CHECKINTR, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x7f, /* udma0-6 */ + .port_ops = &piix_sata_ops, + }, + + /* piix4_pata */ + { + .sht = &piix_sht, + .host_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, /* pio0-4 */ +#if 0 + .mwdma_mask = 0x06, /* mwdma1-2 */ +#else + .mwdma_mask = 0x00, /* mwdma broken */ +#endif + .udma_mask = ATA_UDMA_MASK_40C, + .port_ops = &piix_pata_ops, + }, + + /* ich6_sata */ + { + .sht = &piix_sht, + .host_flags = ATA_FLAG_SATA | ATA_FLAG_SRST | + PIIX_FLAG_COMBINED | PIIX_FLAG_CHECKINTR | + ATA_FLAG_SLAVE_POSS, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x7f, /* udma0-6 */ + .port_ops = &piix_sata_ops, + }, + + /* ich6_sata_rm */ + { + .sht = &piix_sht, + .host_flags = ATA_FLAG_SATA | ATA_FLAG_SRST | + PIIX_FLAG_COMBINED | PIIX_FLAG_CHECKINTR | + ATA_FLAG_SLAVE_POSS | PIIX_FLAG_AHCI, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x7f, /* udma0-6 */ + .port_ops = &piix_sata_ops, + }, + + /* ich7_sata */ + { + .sht = &piix_sht, + .host_flags = ATA_FLAG_SATA | ATA_FLAG_SRST | + PIIX_FLAG_COMBINED | PIIX_FLAG_CHECKINTR | + ATA_FLAG_SLAVE_POSS | PIIX_FLAG_AHCI, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x7f, /* udma0-6 */ + .port_ops = &piix_sata_ops, + }, +}; + +static struct pci_bits piix_enable_bits[] = { + { 0x41U, 1U, 0x80UL, 0x80UL }, /* port 0 */ + { 0x43U, 1U, 0x80UL, 0x80UL }, /* port 1 */ +}; + +MODULE_AUTHOR("Andre Hedrick, Alan Cox, Andrzej Krzysztofowicz, Jeff Garzik"); +MODULE_DESCRIPTION("SCSI low-level driver for Intel PIIX/ICH ATA controllers"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, piix_pci_tbl); +MODULE_VERSION(DRV_VERSION); + +/** + * piix_pata_cbl_detect - Probe host controller cable detect info + * @ap: Port for which cable detect info is desired + * + * Read 80c cable indicator from ATA PCI device's PCI config + * register. This register is normally set by firmware (BIOS). + * + * LOCKING: + * None (inherited from caller). + */ +static void piix_pata_cbl_detect(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); + u8 tmp, mask; + + /* no 80c support in host controller? */ + if ((ap->udma_mask & ~ATA_UDMA_MASK_40C) == 0) + goto cbl40; + + /* check BIOS cable detect results */ + mask = ap->hard_port_no == 0 ? PIIX_80C_PRI : PIIX_80C_SEC; + pci_read_config_byte(pdev, PIIX_IOCFG, &tmp); + if ((tmp & mask) == 0) + goto cbl40; + + ap->cbl = ATA_CBL_PATA80; + return; + +cbl40: + ap->cbl = ATA_CBL_PATA40; + ap->udma_mask &= ATA_UDMA_MASK_40C; +} + +/** + * piix_pata_phy_reset - Probe specified port on PATA host controller + * @ap: Port to probe + * + * Probe PATA phy. + * + * LOCKING: + * None (inherited from caller). + */ + +static void piix_pata_phy_reset(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); + + if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->hard_port_no])) { + ata_port_disable(ap); + printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); + return; + } + + piix_pata_cbl_detect(ap); + + ata_port_probe(ap); + + ata_bus_reset(ap); +} + +/** + * piix_sata_probe - Probe PCI device for present SATA devices + * @ap: Port associated with the PCI device we wish to probe + * + * Reads SATA PCI device's PCI config register Port Configuration + * and Status (PCS) to determine port and device availability. + * + * LOCKING: + * None (inherited from caller). + * + * RETURNS: + * Non-zero if device detected, zero otherwise. + */ +static int piix_sata_probe (struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); + int combined = (ap->flags & ATA_FLAG_SLAVE_POSS); + int orig_mask, mask, i; + u8 pcs; + + mask = (PIIX_PORT_PRESENT << ap->hard_port_no) | + (PIIX_PORT_ENABLED << ap->hard_port_no); + + pci_read_config_byte(pdev, ICH5_PCS, &pcs); + orig_mask = (int) pcs & 0xff; + + /* TODO: this is vaguely wrong for ICH6 combined mode, + * where only two of the four SATA ports are mapped + * onto a single ATA channel. It is also vaguely inaccurate + * for ICH5, which has only two ports. However, this is ok, + * as further device presence detection code will handle + * any false positives produced here. + */ + + for (i = 0; i < 4; i++) { + mask = (PIIX_PORT_PRESENT << i) | (PIIX_PORT_ENABLED << i); + + if ((orig_mask & mask) == mask) + if (combined || (i == ap->hard_port_no)) + return 1; + } + + return 0; +} + +/** + * piix_sata_phy_reset - Probe specified port on SATA host controller + * @ap: Port to probe + * + * Probe SATA phy. + * + * LOCKING: + * None (inherited from caller). + */ + +static void piix_sata_phy_reset(struct ata_port *ap) +{ + if (!piix_sata_probe(ap)) { + ata_port_disable(ap); + printk(KERN_INFO "ata%u: SATA port has no device.\n", ap->id); + return; + } + + ap->cbl = ATA_CBL_SATA; + + ata_port_probe(ap); + + ata_bus_reset(ap); +} + +/** + * piix_set_piomode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: um + * @pio: PIO mode, 0 - 4 + * + * Set PIO mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev) +{ + unsigned int pio = adev->pio_mode - XFER_PIO_0; + struct pci_dev *dev = to_pci_dev(ap->host_set->dev); + unsigned int is_slave = (adev->devno != 0); + unsigned int master_port= ap->hard_port_no ? 0x42 : 0x40; + unsigned int slave_port = 0x44; + u16 master_data; + u8 slave_data; + + static const /* ISP RTC */ + u8 timings[][2] = { { 0, 0 }, + { 0, 0 }, + { 1, 0 }, + { 2, 1 }, + { 2, 3 }, }; + + pci_read_config_word(dev, master_port, &master_data); + if (is_slave) { + master_data |= 0x4000; + /* enable PPE, IE and TIME */ + master_data |= 0x0070; + pci_read_config_byte(dev, slave_port, &slave_data); + slave_data &= (ap->hard_port_no ? 0x0f : 0xf0); + slave_data |= + (timings[pio][0] << 2) | + (timings[pio][1] << (ap->hard_port_no ? 4 : 0)); + } else { + master_data &= 0xccf8; + /* enable PPE, IE and TIME */ + master_data |= 0x0007; + master_data |= + (timings[pio][0] << 12) | + (timings[pio][1] << 8); + } + pci_write_config_word(dev, master_port, master_data); + if (is_slave) + pci_write_config_byte(dev, slave_port, slave_data); +} + +/** + * piix_set_dmamode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: um + * @udma: udma mode, 0 - 6 + * + * Set UDMA mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev) +{ + unsigned int udma = adev->dma_mode; /* FIXME: MWDMA too */ + struct pci_dev *dev = to_pci_dev(ap->host_set->dev); + u8 maslave = ap->hard_port_no ? 0x42 : 0x40; + u8 speed = udma; + unsigned int drive_dn = (ap->hard_port_no ? 2 : 0) + adev->devno; + int a_speed = 3 << (drive_dn * 4); + int u_flag = 1 << drive_dn; + int v_flag = 0x01 << drive_dn; + int w_flag = 0x10 << drive_dn; + int u_speed = 0; + int sitre; + u16 reg4042, reg4a; + u8 reg48, reg54, reg55; + + pci_read_config_word(dev, maslave, ®4042); + DPRINTK("reg4042 = 0x%04x\n", reg4042); + sitre = (reg4042 & 0x4000) ? 1 : 0; + pci_read_config_byte(dev, 0x48, ®48); + pci_read_config_word(dev, 0x4a, ®4a); + pci_read_config_byte(dev, 0x54, ®54); + pci_read_config_byte(dev, 0x55, ®55); + + switch(speed) { + case XFER_UDMA_4: + case XFER_UDMA_2: u_speed = 2 << (drive_dn * 4); break; + case XFER_UDMA_6: + case XFER_UDMA_5: + case XFER_UDMA_3: + case XFER_UDMA_1: u_speed = 1 << (drive_dn * 4); break; + case XFER_UDMA_0: u_speed = 0 << (drive_dn * 4); break; + case XFER_MW_DMA_2: + case XFER_MW_DMA_1: break; + default: + BUG(); + return; + } + + if (speed >= XFER_UDMA_0) { + if (!(reg48 & u_flag)) + pci_write_config_byte(dev, 0x48, reg48 | u_flag); + if (speed == XFER_UDMA_5) { + pci_write_config_byte(dev, 0x55, (u8) reg55|w_flag); + } else { + pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag); + } + if ((reg4a & a_speed) != u_speed) + pci_write_config_word(dev, 0x4a, (reg4a & ~a_speed) | u_speed); + if (speed > XFER_UDMA_2) { + if (!(reg54 & v_flag)) + pci_write_config_byte(dev, 0x54, reg54 | v_flag); + } else + pci_write_config_byte(dev, 0x54, reg54 & ~v_flag); + } else { + if (reg48 & u_flag) + pci_write_config_byte(dev, 0x48, reg48 & ~u_flag); + if (reg4a & a_speed) + pci_write_config_word(dev, 0x4a, reg4a & ~a_speed); + if (reg54 & v_flag) + pci_write_config_byte(dev, 0x54, reg54 & ~v_flag); + if (reg55 & w_flag) + pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag); + } +} + +/* move to PCI layer, integrate w/ MSI stuff */ +static void pci_enable_intx(struct pci_dev *pdev) +{ + u16 pci_command; + + pci_read_config_word(pdev, PCI_COMMAND, &pci_command); + if (pci_command & PCI_COMMAND_INTX_DISABLE) { + pci_command &= ~PCI_COMMAND_INTX_DISABLE; + pci_write_config_word(pdev, PCI_COMMAND, pci_command); + } +} + +#define AHCI_PCI_BAR 5 +#define AHCI_GLOBAL_CTL 0x04 +#define AHCI_ENABLE (1 << 31) +static int piix_disable_ahci(struct pci_dev *pdev) +{ + void *mmio; + unsigned long addr; + u32 tmp; + int rc = 0; + + /* BUG: pci_enable_device has not yet been called. This + * works because this device is usually set up by BIOS. + */ + + addr = pci_resource_start(pdev, AHCI_PCI_BAR); + if (!addr || !pci_resource_len(pdev, AHCI_PCI_BAR)) + return 0; + + mmio = ioremap(addr, 64); + if (!mmio) + return -ENOMEM; + + tmp = readl(mmio + AHCI_GLOBAL_CTL); + if (tmp & AHCI_ENABLE) { + tmp &= ~AHCI_ENABLE; + writel(tmp, mmio + AHCI_GLOBAL_CTL); + + tmp = readl(mmio + AHCI_GLOBAL_CTL); + if (tmp & AHCI_ENABLE) + rc = -EIO; + } + + iounmap(mmio); + return rc; +} + +/** + * piix_init_one - Register PIIX ATA PCI device with kernel services + * @pdev: PCI device to register + * @ent: Entry in piix_pci_tbl matching with @pdev + * + * Called from kernel PCI layer. We probe for combined mode (sigh), + * and then hand over control to libata, for it to do the rest. + * + * LOCKING: + * Inherited from PCI layer (may sleep). + * + * RETURNS: + * Zero on success, or -ERRNO value. + */ + +static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int printed_version; + struct ata_port_info *port_info[2]; + unsigned int combined = 0, n_ports = 1; + unsigned int pata_chan = 0, sata_chan = 0; + + if (!printed_version++) + printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n"); + + /* no hotplugging support (FIXME) */ + if (!in_module_init) + return -ENODEV; + + port_info[0] = &piix_port_info[ent->driver_data]; + port_info[1] = NULL; + + if (port_info[0]->host_flags & PIIX_FLAG_AHCI) { + int rc = piix_disable_ahci(pdev); + if (rc) + return rc; + } + + if (port_info[0]->host_flags & PIIX_FLAG_COMBINED) { + u8 tmp; + pci_read_config_byte(pdev, ICH5_PMR, &tmp); + + if (tmp & PIIX_COMB) { + combined = 1; + if (tmp & PIIX_COMB_PATA_P0) + sata_chan = 1; + else + pata_chan = 1; + } + } + + /* On ICH5, some BIOSen disable the interrupt using the + * PCI_COMMAND_INTX_DISABLE bit added in PCI 2.3. + * On ICH6, this bit has the same effect, but only when + * MSI is disabled (and it is disabled, as we don't use + * message-signalled interrupts currently). + */ + if (port_info[0]->host_flags & PIIX_FLAG_CHECKINTR) + pci_enable_intx(pdev); + + if (combined) { + port_info[sata_chan] = &piix_port_info[ent->driver_data]; + port_info[sata_chan]->host_flags |= ATA_FLAG_SLAVE_POSS; + port_info[pata_chan] = &piix_port_info[ich5_pata]; + n_ports++; + + printk(KERN_WARNING DRV_NAME ": combined mode detected\n"); + } + + return ata_pci_init_one(pdev, port_info, n_ports); +} + +/** + * piix_init - + * + * LOCKING: + * + * RETURNS: + * + */ + +static int __init piix_init(void) +{ + int rc; + + DPRINTK("pci_module_init\n"); + rc = pci_module_init(&piix_pci_driver); + if (rc) + return rc; + + in_module_init = 0; + + DPRINTK("done\n"); + return 0; +} + +/** + * piix_exit - + * + * LOCKING: + * + */ + +static void __exit piix_exit(void) +{ + pci_unregister_driver(&piix_pci_driver); +} + +module_init(piix_init); +module_exit(piix_exit); + -- cgit v1.2.2