From 404d9a900b5bc83a3780ec337ca6fdcb04b766c0 Mon Sep 17 00:00:00 2001 From: Mark Haverkamp Date: Wed, 10 May 2006 09:12:48 -0700 Subject: [SCSI] aacraid: adjustable timeouts Received From Mark Salyzyn Add the ability to adjust for unusual corner case failures. Both of these additional module parameters deal with embedded, non-intel or complicated system scenarios. Aif_timeout can be increased past the default 2 minute timeout to drop application registrations when a system has an unusually high event load resulting from continuing management requests, or simultaneous builds, or sluggish user space as a result of system load. Startup_timeout can be increased past the default 3 minute timeout to drop an adapter initialization for systems that have a very large number of targets, or slow to spin-up targets, or a complicated set of array configurations that extend the time for the firmware to declare that it is operational. This timeout would only have an affect on non-intel based systems, as the (more patient) BIOS would generally be where the startup delay would be dealt with. Signed-off-by: Mark Haverkamp Signed-off-by: James Bottomley --- drivers/scsi/aacraid/rkt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/scsi/aacraid/rkt.c') diff --git a/drivers/scsi/aacraid/rkt.c b/drivers/scsi/aacraid/rkt.c index 7a23e027eb78..5b52966bbbf3 100644 --- a/drivers/scsi/aacraid/rkt.c +++ b/drivers/scsi/aacraid/rkt.c @@ -444,14 +444,14 @@ int aac_rkt_init(struct aac_dev *dev) */ while (!(rkt_readl(dev, MUnit.OMRx[0]) & KERNEL_UP_AND_RUNNING)) { - if(time_after(jiffies, start+180*HZ)) + if(time_after(jiffies, start+startup_timeout*HZ)) { status = rkt_readl(dev, MUnit.OMRx[0]); printk(KERN_ERR "%s%d: adapter kernel failed to start, init status = %lx.\n", dev->name, instance, status); goto error_iounmap; } - schedule_timeout_uninterruptible(1); + msleep(1); } if (request_irq(dev->scsi_host_ptr->irq, aac_rkt_intr, SA_SHIRQ|SA_INTERRUPT, "aacraid", (void *)dev)<0) { -- cgit v1.2.2