From ff6b8ea68f4b7353f88b97024f28127e2148aa00 Mon Sep 17 00:00:00 2001 From: Michael Holzheu Date: Wed, 20 Sep 2006 15:58:49 +0200 Subject: [S390] ipl/dump on panic. It is now possible to specify a ccw/fcp dump device which is used to automatically create a system dump in case of a kernel panic. The dump device can be configured under /sys/firmware/dump. In addition it is now possible to specify a ccw/fcp device which is used for the next reboot of Linux. The reipl device can be configured under /sys/firmware/reipl. Signed-off-by: Michael Holzheu Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/cio.c | 50 ++++++++++++++++++++++++++++++++++++++++---------- 1 file changed, 40 insertions(+), 10 deletions(-) (limited to 'drivers/s390/cio/cio.c') diff --git a/drivers/s390/cio/cio.c b/drivers/s390/cio/cio.c index 89320c1ad825..050963f15802 100644 --- a/drivers/s390/cio/cio.c +++ b/drivers/s390/cio/cio.c @@ -841,14 +841,26 @@ __clear_subchannel_easy(struct subchannel_id schid) return -EBUSY; } -extern void do_reipl(unsigned long devno); -static int -__shutdown_subchannel_easy(struct subchannel_id schid, void *data) +struct sch_match_id { + struct subchannel_id schid; + struct ccw_dev_id devid; + int rc; +}; + +static int __shutdown_subchannel_easy_and_match(struct subchannel_id schid, + void *data) { struct schib schib; + struct sch_match_id *match_id = data; if (stsch_err(schid, &schib)) return -ENXIO; + if (match_id && schib.pmcw.dnv && + (schib.pmcw.dev == match_id->devid.devno) && + (schid.ssid == match_id->devid.ssid)) { + match_id->schid = schid; + match_id->rc = 0; + } if (!schib.pmcw.ena) return 0; switch(__disable_subchannel_easy(schid, &schib)) { @@ -864,18 +876,36 @@ __shutdown_subchannel_easy(struct subchannel_id schid, void *data) return 0; } -void -clear_all_subchannels(void) +static int clear_all_subchannels_and_match(struct ccw_dev_id *devid, + struct subchannel_id *schid) { + struct sch_match_id match_id; + + match_id.devid = *devid; + match_id.rc = -ENODEV; local_irq_disable(); - for_each_subchannel(__shutdown_subchannel_easy, NULL); + for_each_subchannel(__shutdown_subchannel_easy_and_match, &match_id); + if (match_id.rc == 0) + *schid = match_id.schid; + return match_id.rc; } + +void clear_all_subchannels(void) +{ + local_irq_disable(); + for_each_subchannel(__shutdown_subchannel_easy_and_match, NULL); +} + +extern void do_reipl_asm(__u32 schid); + /* Make sure all subchannels are quiet before we re-ipl an lpar. */ -void -reipl(unsigned long devno) +void reipl_ccw_dev(struct ccw_dev_id *devid) { - clear_all_subchannels(); + struct subchannel_id schid; + + if (clear_all_subchannels_and_match(devid, &schid)) + panic("IPL Device not found\n"); cio_reset_channel_paths(); - do_reipl(devno); + do_reipl_asm(*((__u32*)&schid)); } -- cgit v1.2.2 From e87bfe51b5ca2db99dd680bbb1e8fe3c94b607df Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 20 Sep 2006 15:59:15 +0200 Subject: [S390] convert some assembler to C. Convert GET_IPL_DEVICE assembler macro to C function. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/cio.c | 38 ++++++++++++++++++++++++++++++++++++-- 1 file changed, 36 insertions(+), 2 deletions(-) (limited to 'drivers/s390/cio/cio.c') diff --git a/drivers/s390/cio/cio.c b/drivers/s390/cio/cio.c index 050963f15802..61eb7caa1567 100644 --- a/drivers/s390/cio/cio.c +++ b/drivers/s390/cio/cio.c @@ -16,11 +16,10 @@ #include #include #include - #include #include #include - +#include #include "airq.h" #include "cio.h" #include "css.h" @@ -909,3 +908,38 @@ void reipl_ccw_dev(struct ccw_dev_id *devid) cio_reset_channel_paths(); do_reipl_asm(*((__u32*)&schid)); } + +extern struct schib ipl_schib; + +/* + * ipl_save_parameters gets called very early. It is not allowed to access + * anything in the bss section at all. The bss section is not cleared yet, + * but may contain some ipl parameters written by the firmware. + * These parameters (if present) are copied to 0x2000. + * To avoid corruption of the ipl parameters, all variables used by this + * function must reside on the stack or in the data section. + */ +void ipl_save_parameters(void) +{ + struct subchannel_id schid; + unsigned int *ipl_ptr; + void *src, *dst; + + schid = *(struct subchannel_id *)__LC_SUBCHANNEL_ID; + if (!schid.one) + return; + if (stsch(schid, &ipl_schib)) + return; + if (!ipl_schib.pmcw.dnv) + return; + ipl_devno = ipl_schib.pmcw.dev; + ipl_flags |= IPL_DEVNO_VALID; + if (!ipl_schib.pmcw.qf) + return; + ipl_flags |= IPL_PARMBLOCK_VALID; + ipl_ptr = (unsigned int *)__LC_IPL_PARMBLOCK_PTR; + src = (void *)(unsigned long)*ipl_ptr; + dst = (void *)IPL_PARMBLOCK_ORIGIN; + memmove(dst, src, PAGE_SIZE); + *ipl_ptr = IPL_PARMBLOCK_ORIGIN; +} -- cgit v1.2.2 From e0e32c8eba86fd5ea79eefad6f2c0b4988dfd02a Mon Sep 17 00:00:00 2001 From: Peter Oberparleiter Date: Wed, 20 Sep 2006 15:59:57 +0200 Subject: [S390] cio: update path groups on logical CHPID changes. CHPIDs that are logically varied off will not be removed from a CCW device's path group because resign-from-pathgroup command is issued with invalid path mask of 0 because internal CCW operations are masked by the logical path mask after the relevant bits are cleared by the vary operation. Do not apply logical path mask to internal operations. Signed-off-by: Peter Oberparleiter Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/cio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/s390/cio/cio.c') diff --git a/drivers/s390/cio/cio.c b/drivers/s390/cio/cio.c index 61eb7caa1567..54cce542a1ee 100644 --- a/drivers/s390/cio/cio.c +++ b/drivers/s390/cio/cio.c @@ -191,7 +191,7 @@ cio_start_key (struct subchannel *sch, /* subchannel structure */ sch->orb.pfch = sch->options.prefetch == 0; sch->orb.spnd = sch->options.suspend; sch->orb.ssic = sch->options.suspend && sch->options.inter; - sch->orb.lpm = (lpm != 0) ? (lpm & sch->opm) : sch->lpm; + sch->orb.lpm = (lpm != 0) ? lpm : sch->lpm; #ifdef CONFIG_64BIT /* * for 64 bit we always support 64 bit IDAWs with 4k page size only -- cgit v1.2.2 From 28bdc6f6233f380ddc0b430cabd88ffeafea34c7 Mon Sep 17 00:00:00 2001 From: Peter Oberparleiter Date: Wed, 20 Sep 2006 15:59:59 +0200 Subject: [S390] cio: always query all paths on path verification. Reappearing channel paths are sometimes not utilized by CCW devices because path verification incorrectly relies on path-operational-mask information which is not updated until a channel path has been used again. Modify path verification procedure to always query all available paths to a device. Signed-off-by: Peter Oberparleiter Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/cio.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'drivers/s390/cio/cio.c') diff --git a/drivers/s390/cio/cio.c b/drivers/s390/cio/cio.c index 54cce542a1ee..2e2882daefbb 100644 --- a/drivers/s390/cio/cio.c +++ b/drivers/s390/cio/cio.c @@ -569,10 +569,7 @@ cio_validate_subchannel (struct subchannel *sch, struct subchannel_id schid) sch->opm = 0xff; if (!cio_is_console(sch->schid)) chsc_validate_chpids(sch); - sch->lpm = sch->schib.pmcw.pim & - sch->schib.pmcw.pam & - sch->schib.pmcw.pom & - sch->opm; + sch->lpm = sch->schib.pmcw.pam & sch->opm; CIO_DEBUG(KERN_INFO, 0, "Detected device %04x on subchannel 0.%x.%04X" -- cgit v1.2.2