From 1ce7c83fa91d27bd0e195e8b2ff10d3a1caeb0d6 Mon Sep 17 00:00:00 2001 From: Piotr Ziecik Date: Tue, 15 Dec 2009 16:46:12 -0800 Subject: rtc: add driver for BQ32000 I2C RTC This patch adds basic support for Texas Instruments BQ32000 I2C RTC. Only time reading/writing is implemented. Advanced features, such as trickle charger and crystal calibration are not supported. Signed-off-by: Piotr Ziecik Signed-off-by: Alessandro Zummo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/Kconfig | 9 +++ drivers/rtc/Makefile | 1 + drivers/rtc/rtc-bq32k.c | 204 ++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 214 insertions(+) create mode 100644 drivers/rtc/rtc-bq32k.c (limited to 'drivers/rtc') diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 9930d79fa51f..40c168bf6984 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -242,6 +242,15 @@ config RTC_DRV_M41T80_WDT If you say Y here you will get support for the watchdog timer in the ST M41T60 and M41T80 RTC chips series. +config RTC_DRV_BQ32K + tristate "TI BQ32000" + help + If you say Y here you will get support for the TI + BQ32000 I2C RTC chip. + + This driver can also be built as a module. If so, the module + will be called rtc-bq32k. + config RTC_DRV_DM355EVM tristate "TI DaVinci DM355 EVM RTC" depends on MFD_DM355EVM_MSP diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index 6fa20f4ac3f1..52f5f3c3b8e0 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -23,6 +23,7 @@ obj-$(CONFIG_RTC_DRV_AT91RM9200)+= rtc-at91rm9200.o obj-$(CONFIG_RTC_DRV_AT91SAM9) += rtc-at91sam9.o obj-$(CONFIG_RTC_DRV_AU1XXX) += rtc-au1xxx.o obj-$(CONFIG_RTC_DRV_BFIN) += rtc-bfin.o +obj-$(CONFIG_RTC_DRV_BQ32K) += rtc-bq32k.o obj-$(CONFIG_RTC_DRV_BQ4802) += rtc-bq4802.o obj-$(CONFIG_RTC_DRV_CMOS) += rtc-cmos.o obj-$(CONFIG_RTC_DRV_COH901331) += rtc-coh901331.o diff --git a/drivers/rtc/rtc-bq32k.c b/drivers/rtc/rtc-bq32k.c new file mode 100644 index 000000000000..408cc8f735be --- /dev/null +++ b/drivers/rtc/rtc-bq32k.c @@ -0,0 +1,204 @@ +/* + * Driver for TI BQ32000 RTC. + * + * Copyright (C) 2009 Semihalf. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include + +#define BQ32K_SECONDS 0x00 /* Seconds register address */ +#define BQ32K_SECONDS_MASK 0x7F /* Mask over seconds value */ +#define BQ32K_STOP 0x80 /* Oscillator Stop flat */ + +#define BQ32K_MINUTES 0x01 /* Minutes register address */ +#define BQ32K_MINUTES_MASK 0x7F /* Mask over minutes value */ +#define BQ32K_OF 0x80 /* Oscillator Failure flag */ + +#define BQ32K_HOURS_MASK 0x3F /* Mask over hours value */ +#define BQ32K_CENT 0x40 /* Century flag */ +#define BQ32K_CENT_EN 0x80 /* Century flag enable bit */ + +struct bq32k_regs { + uint8_t seconds; + uint8_t minutes; + uint8_t cent_hours; + uint8_t day; + uint8_t date; + uint8_t month; + uint8_t years; +}; + +static struct i2c_driver bq32k_driver; + +static int bq32k_read(struct device *dev, void *data, uint8_t off, uint8_t len) +{ + struct i2c_client *client = to_i2c_client(dev); + struct i2c_msg msgs[] = { + { + .addr = client->addr, + .flags = 0, + .len = 1, + .buf = &off, + }, { + .addr = client->addr, + .flags = I2C_M_RD, + .len = len, + .buf = data, + } + }; + + if (i2c_transfer(client->adapter, msgs, 2) == 2) + return 0; + + return -EIO; +} + +static int bq32k_write(struct device *dev, void *data, uint8_t off, uint8_t len) +{ + struct i2c_client *client = to_i2c_client(dev); + uint8_t buffer[len + 1]; + + buffer[0] = off; + memcpy(&buffer[1], data, len); + + if (i2c_master_send(client, buffer, len + 1) == len + 1) + return 0; + + return -EIO; +} + +static int bq32k_rtc_read_time(struct device *dev, struct rtc_time *tm) +{ + struct bq32k_regs regs; + int error; + + error = bq32k_read(dev, ®s, 0, sizeof(regs)); + if (error) + return error; + + tm->tm_sec = bcd2bin(regs.seconds & BQ32K_SECONDS_MASK); + tm->tm_min = bcd2bin(regs.minutes & BQ32K_SECONDS_MASK); + tm->tm_hour = bcd2bin(regs.cent_hours & BQ32K_HOURS_MASK); + tm->tm_mday = bcd2bin(regs.date); + tm->tm_wday = bcd2bin(regs.day) - 1; + tm->tm_mon = bcd2bin(regs.month) - 1; + tm->tm_year = bcd2bin(regs.years) + + ((regs.cent_hours & BQ32K_CENT) ? 100 : 0); + + return rtc_valid_tm(tm); +} + +static int bq32k_rtc_set_time(struct device *dev, struct rtc_time *tm) +{ + struct bq32k_regs regs; + + regs.seconds = bin2bcd(tm->tm_sec); + regs.minutes = bin2bcd(tm->tm_min); + regs.cent_hours = bin2bcd(tm->tm_hour) | BQ32K_CENT_EN; + regs.day = bin2bcd(tm->tm_wday + 1); + regs.date = bin2bcd(tm->tm_mday); + regs.month = bin2bcd(tm->tm_mon + 1); + + if (tm->tm_year >= 100) { + regs.cent_hours |= BQ32K_CENT; + regs.years = bin2bcd(tm->tm_year - 100); + } else + regs.years = bin2bcd(tm->tm_year); + + return bq32k_write(dev, ®s, 0, sizeof(regs)); +} + +static const struct rtc_class_ops bq32k_rtc_ops = { + .read_time = bq32k_rtc_read_time, + .set_time = bq32k_rtc_set_time, +}; + +static int bq32k_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct rtc_device *rtc; + uint8_t reg; + int error; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) + return -ENODEV; + + /* Check Oscillator Stop flag */ + error = bq32k_read(dev, ®, BQ32K_SECONDS, 1); + if (!error && (reg & BQ32K_STOP)) { + dev_warn(dev, "Oscillator was halted. Restarting...\n"); + reg &= ~BQ32K_STOP; + error = bq32k_write(dev, ®, BQ32K_SECONDS, 1); + } + if (error) + return error; + + /* Check Oscillator Failure flag */ + error = bq32k_read(dev, ®, BQ32K_MINUTES, 1); + if (!error && (reg & BQ32K_OF)) { + dev_warn(dev, "Oscillator Failure. Check RTC battery.\n"); + reg &= ~BQ32K_OF; + error = bq32k_write(dev, ®, BQ32K_MINUTES, 1); + } + if (error) + return error; + + rtc = rtc_device_register(bq32k_driver.driver.name, &client->dev, + &bq32k_rtc_ops, THIS_MODULE); + if (IS_ERR(rtc)) + return PTR_ERR(rtc); + + i2c_set_clientdata(client, rtc); + + return 0; +} + +static int __devexit bq32k_remove(struct i2c_client *client) +{ + struct rtc_device *rtc = i2c_get_clientdata(client); + + rtc_device_unregister(rtc); + return 0; +} + +static const struct i2c_device_id bq32k_id[] = { + { "bq32000", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, bq32k_id); + +static struct i2c_driver bq32k_driver = { + .driver = { + .name = "bq32k", + .owner = THIS_MODULE, + }, + .probe = bq32k_probe, + .remove = __devexit_p(bq32k_remove), + .id_table = bq32k_id, +}; + +static __init int bq32k_init(void) +{ + return i2c_add_driver(&bq32k_driver); +} +module_init(bq32k_init); + +static __exit void bq32k_exit(void) +{ + i2c_del_driver(&bq32k_driver); +} +module_exit(bq32k_exit); + +MODULE_AUTHOR("Semihalf, Piotr Ziecik "); +MODULE_DESCRIPTION("TI BQ32000 I2C RTC driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.2