From dd797d81d3d7da31a50031f2741b93327ed22260 Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Sat, 2 Aug 2008 17:54:14 +0200 Subject: pcmcia: use dev_printk and dev_dbg in yenta_socket Signed-off-by: Dominik Brodowski --- drivers/pcmcia/ti113x.h | 78 +++++++++++++++++++++++++++---------------------- 1 file changed, 43 insertions(+), 35 deletions(-) (limited to 'drivers/pcmcia/ti113x.h') diff --git a/drivers/pcmcia/ti113x.h b/drivers/pcmcia/ti113x.h index 129db7bd06c3..aaa70227bfb0 100644 --- a/drivers/pcmcia/ti113x.h +++ b/drivers/pcmcia/ti113x.h @@ -339,8 +339,8 @@ static void ti12xx_irqroute_func0(struct yenta_socket *socket) mfunc = mfunc_old = config_readl(socket, TI122X_MFUNC); devctl = config_readb(socket, TI113X_DEVICE_CONTROL); - printk(KERN_INFO "Yenta TI: socket %s, mfunc 0x%08x, devctl 0x%02x\n", - pci_name(socket->dev), mfunc, devctl); + dev_printk(KERN_INFO, &socket->dev->dev, + "TI: mfunc 0x%08x, devctl 0x%02x\n", mfunc, devctl); /* make sure PCI interrupts are enabled before probing */ ti_init(socket); @@ -354,8 +354,8 @@ static void ti12xx_irqroute_func0(struct yenta_socket *socket) * We're here which means PCI interrupts are _not_ delivered. try to * find the right setting (all serial or parallel) */ - printk(KERN_INFO "Yenta TI: socket %s probing PCI interrupt failed, trying to fix\n", - pci_name(socket->dev)); + dev_printk(KERN_INFO, &socket->dev->dev, + "TI: probing PCI interrupt failed, trying to fix\n"); /* for serial PCI make sure MFUNC3 is set to IRQSER */ if ((devctl & TI113X_DCR_IMODE_MASK) == TI12XX_DCR_IMODE_ALL_SERIAL) { @@ -379,8 +379,8 @@ static void ti12xx_irqroute_func0(struct yenta_socket *socket) pci_irq_status = yenta_probe_cb_irq(socket); if (pci_irq_status == 1) { - printk(KERN_INFO "Yenta TI: socket %s all-serial interrupts ok\n", - pci_name(socket->dev)); + dev_printk(KERN_INFO, &socket->dev->dev, + "TI: all-serial interrupts ok\n"); mfunc_old = mfunc; goto out; } @@ -395,8 +395,8 @@ static void ti12xx_irqroute_func0(struct yenta_socket *socket) } /* serial PCI interrupts not working fall back to parallel */ - printk(KERN_INFO "Yenta TI: socket %s falling back to parallel PCI interrupts\n", - pci_name(socket->dev)); + dev_printk(KERN_INFO, &socket->dev->dev, + "TI: falling back to parallel PCI interrupts\n"); devctl &= ~TI113X_DCR_IMODE_MASK; devctl |= TI113X_DCR_IMODE_SERIAL; /* serial ISA could be right */ config_writeb(socket, TI113X_DEVICE_CONTROL, devctl); @@ -427,8 +427,8 @@ static void ti12xx_irqroute_func0(struct yenta_socket *socket) pci_irq_status = yenta_probe_cb_irq(socket); if (pci_irq_status == 1) { mfunc_old = mfunc; - printk(KERN_INFO "Yenta TI: socket %s parallel PCI interrupts ok\n", - pci_name(socket->dev)); + dev_printk(KERN_INFO, &socket->dev->dev, + "TI: parallel PCI interrupts ok\n"); } else { /* not working, back to old value */ mfunc = mfunc_old; @@ -440,8 +440,9 @@ static void ti12xx_irqroute_func0(struct yenta_socket *socket) out: if (pci_irq_status < 1) { socket->cb_irq = 0; - printk(KERN_INFO "Yenta TI: socket %s no PCI interrupts. Fish. Please report.\n", - pci_name(socket->dev)); + dev_printk(KERN_INFO, &socket->dev->dev, + "Yenta TI: no PCI interrupts. Fish. " + "Please report.\n"); } } @@ -513,8 +514,9 @@ static void ti12xx_irqroute_func1(struct yenta_socket *socket) mfunc = mfunc_old = config_readl(socket, TI122X_MFUNC); devctl = config_readb(socket, TI113X_DEVICE_CONTROL); - printk(KERN_INFO "Yenta TI: socket %s, mfunc 0x%08x, devctl 0x%02x\n", - pci_name(socket->dev), mfunc, devctl); + dev_printk(KERN_INFO, &socket->dev->dev, + "TI: mfunc 0x%08x, devctl 0x%02x\n", + mfunc, devctl); /* if IRQs are configured as tied, align irq of func1 with func0 */ sysctl = config_readl(socket, TI113X_SYSTEM_CONTROL); @@ -533,9 +535,8 @@ static void ti12xx_irqroute_func1(struct yenta_socket *socket) * We're here which means PCI interrupts are _not_ delivered. try to * find the right setting */ - printk(KERN_INFO "Yenta TI: socket %s probing PCI interrupt failed, trying to fix\n", - pci_name(socket->dev)); - + dev_printk(KERN_INFO, &socket->dev->dev, + "TI: probing PCI interrupt failed, trying to fix\n"); /* if all serial: set INTRTIE, probe again */ if ((devctl & TI113X_DCR_IMODE_MASK) == TI12XX_DCR_IMODE_ALL_SERIAL) { @@ -544,8 +545,8 @@ static void ti12xx_irqroute_func1(struct yenta_socket *socket) if (ti12xx_tie_interrupts(socket, &old_irq)) { pci_irq_status = yenta_probe_cb_irq(socket); if (pci_irq_status == 1) { - printk(KERN_INFO "Yenta TI: socket %s all-serial interrupts, tied ok\n", - pci_name(socket->dev)); + dev_printk(KERN_INFO, &socket->dev->dev, + "TI: all-serial interrupts, tied ok\n"); goto out; } @@ -582,8 +583,8 @@ static void ti12xx_irqroute_func1(struct yenta_socket *socket) pci_irq_status = yenta_probe_cb_irq(socket); if (pci_irq_status == 1) { - printk(KERN_INFO "Yenta TI: socket %s parallel PCI interrupts ok\n", - pci_name(socket->dev)); + dev_printk(KERN_INFO, &socket->dev->dev, + "TI: parallel PCI interrupts ok\n"); goto out; } @@ -593,13 +594,13 @@ static void ti12xx_irqroute_func1(struct yenta_socket *socket) if (pci_irq_status == -1) goto out; } - + /* still nothing: set INTRTIE */ if (ti12xx_tie_interrupts(socket, &old_irq)) { pci_irq_status = yenta_probe_cb_irq(socket); if (pci_irq_status == 1) { - printk(KERN_INFO "Yenta TI: socket %s parallel PCI interrupts, tied ok\n", - pci_name(socket->dev)); + dev_printk(KERN_INFO, &socket->dev->dev, + "TI: parallel PCI interrupts, tied ok\n"); goto out; } @@ -610,8 +611,8 @@ static void ti12xx_irqroute_func1(struct yenta_socket *socket) out: if (pci_irq_status < 1) { socket->cb_irq = 0; - printk(KERN_INFO "Yenta TI: socket %s no PCI interrupts. Fish. Please report.\n", - pci_name(socket->dev)); + dev_printk(KERN_INFO, &socket->dev->dev, + "TI: no PCI interrupts. Fish. Please report.\n"); } } @@ -815,11 +816,13 @@ static int ti12xx_override(struct yenta_socket *socket) /* make sure that memory burst is active */ val_orig = val = config_readl(socket, TI113X_SYSTEM_CONTROL); if (disable_clkrun && PCI_FUNC(socket->dev->devfn) == 0) { - printk(KERN_INFO "Yenta: Disabling CLKRUN feature\n"); + dev_printk(KERN_INFO, &socket->dev->dev, + "Disabling CLKRUN feature\n"); val |= TI113X_SCR_KEEPCLK; } if (!(val & TI122X_SCR_MRBURSTUP)) { - printk(KERN_INFO "Yenta: Enabling burst memory read transactions\n"); + dev_printk(KERN_INFO, &socket->dev->dev, + "Enabling burst memory read transactions\n"); val |= TI122X_SCR_MRBURSTUP; } if (val_orig != val) @@ -830,10 +833,12 @@ static int ti12xx_override(struct yenta_socket *socket) * CSC interrupts to PCI rather than INTVAL. */ val = config_readb(socket, TI1250_DIAGNOSTIC); - printk(KERN_INFO "Yenta: Using %s to route CSC interrupts to PCI\n", - (val & TI1250_DIAG_PCI_CSC) ? "CSCINT" : "INTVAL"); - printk(KERN_INFO "Yenta: Routing CardBus interrupts to %s\n", - (val & TI1250_DIAG_PCI_IREQ) ? "PCI" : "ISA"); + dev_printk(KERN_INFO, &socket->dev->dev, + "Using %s to route CSC interrupts to PCI\n", + (val & TI1250_DIAG_PCI_CSC) ? "CSCINT" : "INTVAL"); + dev_printk(KERN_INFO, &socket->dev->dev, + "Routing CardBus interrupts to %s\n", + (val & TI1250_DIAG_PCI_IREQ) ? "PCI" : "ISA"); /* do irqrouting, depending on function */ if (PCI_FUNC(socket->dev->devfn) == 0) @@ -858,8 +863,9 @@ static int ti1250_override(struct yenta_socket *socket) diag |= TI1250_DIAG_PCI_CSC | TI1250_DIAG_PCI_IREQ; if (diag != old) { - printk(KERN_INFO "Yenta: adjusting diagnostic: %02x -> %02x\n", - old, diag); + dev_printk(KERN_INFO, &socket->dev->dev, + "adjusting diagnostic: %02x -> %02x\n", + old, diag); config_writeb(socket, TI1250_DIAGNOSTIC, diag); } @@ -924,7 +930,9 @@ static void ene_tune_bridge(struct pcmcia_socket *sock, struct pci_bus *bus) /* default to clear TLTEnable bit, old behaviour */ test_c9 &= ~ENE_TEST_C9_TLTENABLE; - printk(KERN_INFO "yenta EnE: chaning testregister 0xC9, %02x -> %02x\n", old_c9, test_c9); + dev_printk(KERN_INFO, &socket->dev->dev, + "EnE: chaning testregister 0xC9, %02x -> %02x\n", + old_c9, test_c9); config_writeb(socket, ENE_TEST_C9, test_c9); } -- cgit v1.2.2