From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/pcmcia/Kconfig | 203 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 203 insertions(+) create mode 100644 drivers/pcmcia/Kconfig (limited to 'drivers/pcmcia/Kconfig') diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig new file mode 100644 index 000000000000..6375ebc85020 --- /dev/null +++ b/drivers/pcmcia/Kconfig @@ -0,0 +1,203 @@ +# +# PCMCIA bus subsystem configuration +# +# Right now the non-CardBus choices are not supported +# by the integrated kernel driver. +# + +menu "PCCARD (PCMCIA/CardBus) support" + +config PCCARD + tristate "PCCard (PCMCIA/CardBus) support" + select HOTPLUG + ---help--- + Say Y here if you want to attach PCMCIA- or PC-cards to your Linux + computer. These are credit-card size devices such as network cards, + modems or hard drives often used with laptops computers. There are + actually two varieties of these cards: the older 16 bit PCMCIA cards + and the newer 32 bit CardBus cards. + + To compile this driver as modules, choose M here: the + module will be called pcmcia_core. + +if PCCARD + +config PCMCIA_DEBUG + bool "Enable PCCARD debugging" + help + Say Y here to enable PCMCIA subsystem debugging. You + will need to choose the debugging level either via the + kernel command line, or module options depending whether + you build the PCMCIA as modules. + + The kernel command line options are: + pcmcia_core.pc_debug=N + ds.pc_debug=N + sa11xx_core.pc_debug=N + + The module option is called pc_debug=N + + In all the above examples, N is the debugging verbosity + level. + +config PCMCIA + tristate "16-bit PCMCIA support" + default y + ---help--- + This option enables support for 16-bit PCMCIA cards. Most older + PC-cards are such 16-bit PCMCIA cards, so unless you know you're + only using 32-bit CardBus cards, say Y or M here. + + To use 16-bit PCMCIA cards, you will need supporting software from + David Hinds' pcmcia-cs package (see the file + for location). Please also read the PCMCIA-HOWTO, available from + . + + To compile this driver as modules, choose M here: the + module will be called pcmcia. + + If unsure, say Y. + +config CARDBUS + bool "32-bit CardBus support" + depends on PCI + default y + ---help--- + CardBus is a bus mastering architecture for PC-cards, which allows + for 32 bit PC-cards (the original PCMCIA standard specifies only + a 16 bit wide bus). Many newer PC-cards are actually CardBus cards. + + To use 32 bit PC-cards, you also need a CardBus compatible host + bridge. Virtually all modern PCMCIA bridges do this, and most of + them are "yenta-compatible", so say Y or M there, too. + + If unsure, say Y. + +comment "PC-card bridges" + +config YENTA + tristate "CardBus yenta-compatible bridge support" + depends on PCI +#fixme: remove dependendcy on CARDBUS + depends on CARDBUS + select PCCARD_NONSTATIC + ---help--- + This option enables support for CardBus host bridges. Virtually + all modern PCMCIA bridges are CardBus compatible. A "bridge" is + the hardware inside your computer that PCMCIA cards are plugged + into. + + To compile this driver as modules, choose M here: the + module will be called yenta_socket. + + If unsure, say Y. + +config PD6729 + tristate "Cirrus PD6729 compatible bridge support" + depends on PCMCIA && PCI + select PCCARD_NONSTATIC + help + This provides support for the Cirrus PD6729 PCI-to-PCMCIA bridge + device, found in some older laptops and PCMCIA card readers. + +config I82092 + tristate "i82092 compatible bridge support" + depends on PCMCIA && PCI + select PCCARD_NONSTATIC + help + This provides support for the Intel I82092AA PCI-to-PCMCIA bridge device, + found in some older laptops and more commonly in evaluation boards for the + chip. + +config I82365 + tristate "i82365 compatible bridge support" + depends on PCMCIA && ISA + select PCCARD_NONSTATIC + help + Say Y here to include support for ISA-bus PCMCIA host bridges that + are register compatible with the Intel i82365. These are found on + older laptops and ISA-bus card readers for desktop systems. A + "bridge" is the hardware inside your computer that PCMCIA cards are + plugged into. If unsure, say N. + +config TCIC + tristate "Databook TCIC host bridge support" + depends on PCMCIA + select PCCARD_NONSTATIC + help + Say Y here to include support for the Databook TCIC family of PCMCIA + host bridges. These are only found on a handful of old systems. + "Bridge" is the name used for the hardware inside your computer that + PCMCIA cards are plugged into. If unsure, say N. + +config HD64465_PCMCIA + tristate "HD64465 host bridge support" + depends on HD64465 && PCMCIA + +config PCMCIA_AU1X00 + tristate "Au1x00 pcmcia support" + depends on SOC_AU1X00 && PCMCIA + +config PCMCIA_SA1100 + tristate "SA1100 support" + depends on ARM && ARCH_SA1100 && PCMCIA + help + Say Y here to include support for SA11x0-based PCMCIA or CF + sockets, found on HP iPAQs, Yopy, and other StrongARM(R)/ + Xscale(R) embedded machines. + + This driver is also available as a module called sa1100_cs. + +config PCMCIA_SA1111 + tristate "SA1111 support" + depends on ARM && ARCH_SA1100 && SA1111 && PCMCIA + help + Say Y here to include support for SA1111-based PCMCIA or CF + sockets, found on the Jornada 720, Graphicsmaster and other + StrongARM(R)/Xscale(R) embedded machines. + + This driver is also available as a module called sa1111_cs. + +config PCMCIA_PXA2XX + tristate "PXA2xx support" + depends on ARM && ARCH_PXA && PCMCIA + help + Say Y here to include support for the PXA2xx PCMCIA controller + +config PCMCIA_PROBE + bool + default y if ISA && !ARCH_SA1100 && !ARCH_CLPS711X + +config M32R_PCC + bool "M32R PCMCIA I/F" + depends on M32R && CHIP_M32700 && PCMCIA + help + Say Y here to use the M32R PCMCIA controller. + +config M32R_CFC + bool "M32R CF I/F Controller" + depends on M32R && (PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_OPSPUT) + help + Say Y here to use the M32R CompactFlash controller. + +config M32R_CFC_NUM + int "M32R CF I/F number" + depends on M32R_CFC + default "1" if PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_OPSPUT + help + Set the number of M32R CF slots. + +config PCMCIA_VRC4171 + tristate "NEC VRC4171 Card Controllers support" + depends on VRC4171 && PCMCIA + +config PCMCIA_VRC4173 + tristate "NEC VRC4173 CARDU support" + depends on CPU_VR41XX && PCI && PCMCIA + +config PCCARD_NONSTATIC + tristate + +endif # PCCARD + +endmenu -- cgit v1.2.2