From 8cdfb29c0cd8018f92214c11c631d8926f4cb032 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Fri, 9 Mar 2007 10:54:42 -0500 Subject: libata/IDE: remove combined mode quirk Both old-IDE and libata should be able handle all controllers and devices found using normal resource reservation methods. This eliminates the awful, low-performing split-driver configuration where old-IDE drove the PATA portion of a PCI device, in PIO-only mode, and libata drove the SATA portion of the /same/ PCI device, in DMA mode. Typically vendors would ship SATA hard drive / PATA optical configuration, which would lend itself to slow (PIO-only) CD-ROM performance. For Intel users running in combined mode, it is now wholly dependent on your driver choice (potentially link order, if you compile both drivers in) whether old-IDE or libata will drive your hardware. In either case, you will get full performance from both SATA and PATA ports now, without having to pass a kernel command line parameter. Signed-off-by: Jeff Garzik --- drivers/pci/quirks.c | 113 --------------------------------------------------- 1 file changed, 113 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 65d6f23ead41..3411483240cd 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1303,119 +1303,6 @@ static void __init quirk_alder_ioapic(struct pci_dev *pdev) DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EESSC, quirk_alder_ioapic ); #endif -enum ide_combined_type { COMBINED = 0, IDE = 1, LIBATA = 2 }; -/* Defaults to combined */ -static enum ide_combined_type combined_mode; - -static int __init combined_setup(char *str) -{ - if (!strncmp(str, "ide", 3)) - combined_mode = IDE; - else if (!strncmp(str, "libata", 6)) - combined_mode = LIBATA; - else /* "combined" or anything else defaults to old behavior */ - combined_mode = COMBINED; - - return 1; -} -__setup("combined_mode=", combined_setup); - -#ifdef CONFIG_SATA_INTEL_COMBINED -static void __devinit quirk_intel_ide_combined(struct pci_dev *pdev) -{ - u8 prog, comb, tmp; - int ich = 0; - - /* - * Narrow down to Intel SATA PCI devices. - */ - switch (pdev->device) { - /* PCI ids taken from drivers/scsi/ata_piix.c */ - case 0x24d1: - case 0x24df: - case 0x25a3: - case 0x25b0: - ich = 5; - break; - case 0x2651: - case 0x2652: - case 0x2653: - case 0x2680: /* ESB2 */ - ich = 6; - break; - case 0x27c0: - case 0x27c4: - ich = 7; - break; - case 0x2828: /* ICH8M */ - ich = 8; - break; - default: - /* we do not handle this PCI device */ - return; - } - - /* - * Read combined mode register. - */ - pci_read_config_byte(pdev, 0x90, &tmp); /* combined mode reg */ - - if (ich == 5) { - tmp &= 0x6; /* interesting bits 2:1, PATA primary/secondary */ - if (tmp == 0x4) /* bits 10x */ - comb = (1 << 0); /* SATA port 0, PATA port 1 */ - else if (tmp == 0x6) /* bits 11x */ - comb = (1 << 2); /* PATA port 0, SATA port 1 */ - else - return; /* not in combined mode */ - } else { - WARN_ON((ich != 6) && (ich != 7) && (ich != 8)); - tmp &= 0x3; /* interesting bits 1:0 */ - if (tmp & (1 << 0)) - comb = (1 << 2); /* PATA port 0, SATA port 1 */ - else if (tmp & (1 << 1)) - comb = (1 << 0); /* SATA port 0, PATA port 1 */ - else - return; /* not in combined mode */ - } - - /* - * Read programming interface register. - * (Tells us if it's legacy or native mode) - */ - pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog); - - /* if SATA port is in native mode, we're ok. */ - if (prog & comb) - return; - - /* Don't reserve any so the IDE driver can get them (but only if - * combined_mode=ide). - */ - if (combined_mode == IDE) - return; - - /* Grab them both for libata if combined_mode=libata. */ - if (combined_mode == LIBATA) { - request_region(0x1f0, 8, "libata"); /* port 0 */ - request_region(0x170, 8, "libata"); /* port 1 */ - return; - } - - /* SATA port is in legacy mode. Reserve port so that - * IDE driver does not attempt to use it. If request_region - * fails, it will be obvious at boot time, so we don't bother - * checking return values. - */ - if (comb == (1 << 0)) - request_region(0x1f0, 8, "libata"); /* port 0 */ - else - request_region(0x170, 8, "libata"); /* port 1 */ -} -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, quirk_intel_ide_combined ); -#endif /* CONFIG_SATA_INTEL_COMBINED */ - - int pcie_mch_quirk; EXPORT_SYMBOL(pcie_mch_quirk); -- cgit v1.2.2