From b5e4efe7e061ff52ac97b9fa45acca529d8daeea Mon Sep 17 00:00:00 2001 From: "eiichiro.oiwa.nm@hitachi.com" Date: Thu, 28 Sep 2006 13:55:47 +0900 Subject: PCI: Turn pci_fixup_video into generic for embedded VGA pci_fixup_video turns into generic code because there are many platforms need this fixup for embedded VGA as well as x86. The Video BIOS integrates into System BIOS on a machine has embedded VGA although embedded VGA generally don't have PCI ROM. As a result, embedded VGA need the way that the sysfs rom points to the Video BIOS of System RAM (0xC0000). PCI-to-PCI Bridge Architecture specification describes the condition whether or not PCI ROM forwards VGA compatible memory address. fixup_video suits this specification. Although the Video ROM generally implements in x86 code regardless of platform, some application such as X Window System can run this code by dosemu86. Therefore, pci_fixup_video should turn into generic code. Signed-off-by: Eiichiro Oiwa Acked-by: Alan Cox Acked-by: Jesse Barnes Signed-off-by: Greg Kroah-Hartman --- drivers/pci/quirks.c | 45 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+) (limited to 'drivers/pci/quirks.c') diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 1d2ccda946fd..371ab8821f10 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1619,6 +1619,51 @@ static void __devinit fixup_rev1_53c810(struct pci_dev* dev) } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810); +/* + * Fixup to mark boot BIOS video selected by BIOS before it changes + * + * From information provided by "Jon Smirl" + * + * The standard boot ROM sequence for an x86 machine uses the BIOS + * to select an initial video card for boot display. This boot video + * card will have it's BIOS copied to C0000 in system RAM. + * IORESOURCE_ROM_SHADOW is used to associate the boot video + * card with this copy. On laptops this copy has to be used since + * the main ROM may be compressed or combined with another image. + * See pci_map_rom() for use of this flag. IORESOURCE_ROM_SHADOW + * is marked here since the boot video device will be the only enabled + * video device at this point. + */ + +static void __devinit fixup_video(struct pci_dev *pdev) +{ + struct pci_dev *bridge; + struct pci_bus *bus; + u16 config; + + if ((pdev->class >> 8) != PCI_CLASS_DISPLAY_VGA) + return; + + /* Is VGA routed to us? */ + bus = pdev->bus; + while (bus) { + bridge = bus->self; + if (bridge) { + pci_read_config_word(bridge, PCI_BRIDGE_CONTROL, + &config); + if (!(config & PCI_BRIDGE_CTL_VGA)) + return; + } + bus = bus->parent; + } + pci_read_config_word(pdev, PCI_COMMAND, &config); + if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) { + pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW; + printk(KERN_DEBUG "Boot video device is %s\n", pci_name(pdev)); + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, fixup_video); + static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, struct pci_fixup *end) { -- cgit v1.2.2