From 583c377f1d58e705f75d8d5648ab41722be1ebca Mon Sep 17 00:00:00 2001 From: David Brownell Date: Fri, 22 Feb 2008 21:41:51 -0800 Subject: ACPI: acpi_pci_set_power_state() cleanups Minor cleanups to acpi_pci_set_power_state(): use the ACPI and PCI state symbols to make clear that a mapping is being done between PCI and ACPI states, instead of using magic numbers. For paranoia's sake, report any errors. Save five bytes (x86_64) too. Signed-off-by: David Brownell Signed-off-by: Len Brown --- drivers/pci/pci-acpi.c | 24 ++++++++++++++++-------- 1 file changed, 16 insertions(+), 8 deletions(-) (limited to 'drivers/pci/pci-acpi.c') diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index 4a23654184fc..72f7476930c8 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -272,21 +272,29 @@ static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state) { acpi_handle handle = DEVICE_ACPI_HANDLE(&dev->dev); acpi_handle tmp; - static int state_conv[] = { - [0] = 0, - [1] = 1, - [2] = 2, - [3] = 3, - [4] = 3 + static const u8 state_conv[] = { + [PCI_D0] = ACPI_STATE_D0, + [PCI_D1] = ACPI_STATE_D1, + [PCI_D2] = ACPI_STATE_D2, + [PCI_D3hot] = ACPI_STATE_D3, + [PCI_D3cold] = ACPI_STATE_D3 }; - int acpi_state = state_conv[(int __force) state]; if (!handle) return -ENODEV; /* If the ACPI device has _EJ0, ignore the device */ if (ACPI_SUCCESS(acpi_get_handle(handle, "_EJ0", &tmp))) return 0; - return acpi_bus_set_power(handle, acpi_state); + + switch (state) { + case PCI_D0: + case PCI_D1: + case PCI_D2: + case PCI_D3hot: + case PCI_D3cold: + return acpi_bus_set_power(handle, state_conv[state]); + } + return -EINVAL; } -- cgit v1.2.2