From dbd7a78818d125a0ebd5507d4edb4dd5900006ab Mon Sep 17 00:00:00 2001 From: "rajesh.shah@intel.com" Date: Thu, 13 Oct 2005 12:05:36 -0700 Subject: [PATCH] shpchp: use the PCI core for hotplug resource management This patch converts the standard hotplug controller driver to use the PCI core for resource management. This eliminates a whole lot of duplicated code, and integrates shpchp in the system's normal PCI handling code. Signed-off-by: Rajesh Shah Signed-off-by: Greg Kroah-Hartman --- drivers/pci/hotplug/shpchprm_legacy.c | 294 ---------------------------------- 1 file changed, 294 deletions(-) (limited to 'drivers/pci/hotplug/shpchprm_legacy.c') diff --git a/drivers/pci/hotplug/shpchprm_legacy.c b/drivers/pci/hotplug/shpchprm_legacy.c index ba6c549c9b9d..6c27debe9522 100644 --- a/drivers/pci/hotplug/shpchprm_legacy.c +++ b/drivers/pci/hotplug/shpchprm_legacy.c @@ -34,25 +34,11 @@ #include #include #include -#ifdef CONFIG_IA64 -#include -#endif #include "shpchp.h" #include "shpchprm.h" -#include "shpchprm_legacy.h" - -static void __iomem *shpchp_rom_start; -static u16 unused_IRQ; void shpchprm_cleanup(void) { - if (shpchp_rom_start) - iounmap(shpchp_rom_start); -} - -int shpchprm_print_pirt(void) -{ - return 0; } int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busnum, u8 devnum) @@ -63,280 +49,6 @@ int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busn return 0; } -/* Find the Hot Plug Resource Table in the specified region of memory */ -static void __iomem *detect_HRT_floating_pointer(void __iomem *begin, void __iomem *end) -{ - void __iomem *fp; - void __iomem *endp; - u8 temp1, temp2, temp3, temp4; - int status = 0; - - endp = (end - sizeof(struct hrt) + 1); - - for (fp = begin; fp <= endp; fp += 16) { - temp1 = readb(fp + SIG0); - temp2 = readb(fp + SIG1); - temp3 = readb(fp + SIG2); - temp4 = readb(fp + SIG3); - if (temp1 == '$' && temp2 == 'H' && temp3 == 'R' && temp4 == 'T') { - status = 1; - break; - } - } - - if (!status) - fp = NULL; - - dbg("Discovered Hotplug Resource Table at %p\n", fp); - return fp; -} - -/* - * shpchprm_find_available_resources - * - * Finds available memory, IO, and IRQ resources for programming - * devices which may be added to the system - * this function is for hot plug ADD! - * - * returns 0 if success - */ -int shpchprm_find_available_resources(struct controller *ctrl) -{ - u8 populated_slot; - u8 bridged_slot; - void __iomem *one_slot; - struct pci_func *func = NULL; - int i = 10, index = 0; - u32 temp_dword, rc; - ulong temp_ulong; - struct pci_resource *mem_node; - struct pci_resource *p_mem_node; - struct pci_resource *io_node; - struct pci_resource *bus_node; - void __iomem *rom_resource_table; - struct pci_bus lpci_bus, *pci_bus; - u8 cfgspc_irq, temp; - - memcpy(&lpci_bus, ctrl->pci_bus, sizeof(lpci_bus)); - pci_bus = &lpci_bus; - rom_resource_table = detect_HRT_floating_pointer(shpchp_rom_start, shpchp_rom_start + 0xffff); - dbg("rom_resource_table = %p\n", rom_resource_table); - if (rom_resource_table == NULL) - return -ENODEV; - - /* Sum all resources and setup resource maps */ - unused_IRQ = readl(rom_resource_table + UNUSED_IRQ); - dbg("unused_IRQ = %x\n", unused_IRQ); - - temp = 0; - while (unused_IRQ) { - if (unused_IRQ & 1) { - shpchp_disk_irq = temp; - break; - } - unused_IRQ = unused_IRQ >> 1; - temp++; - } - - dbg("shpchp_disk_irq= %d\n", shpchp_disk_irq); - unused_IRQ = unused_IRQ >> 1; - temp++; - - while (unused_IRQ) { - if (unused_IRQ & 1) { - shpchp_nic_irq = temp; - break; - } - unused_IRQ = unused_IRQ >> 1; - temp++; - } - - dbg("shpchp_nic_irq= %d\n", shpchp_nic_irq); - unused_IRQ = readl(rom_resource_table + PCIIRQ); - - temp = 0; - - pci_read_config_byte(ctrl->pci_dev, PCI_INTERRUPT_LINE, &cfgspc_irq); - - if (!shpchp_nic_irq) { - shpchp_nic_irq = cfgspc_irq; - } - - if (!shpchp_disk_irq) { - shpchp_disk_irq = cfgspc_irq; - } - - dbg("shpchp_disk_irq, shpchp_nic_irq= %d, %d\n", shpchp_disk_irq, shpchp_nic_irq); - - one_slot = rom_resource_table + sizeof(struct hrt); - - i = readb(rom_resource_table + NUMBER_OF_ENTRIES); - dbg("number_of_entries = %d\n", i); - - if (!readb(one_slot + SECONDARY_BUS)) - return (1); - - dbg("dev|IO base|length|MEMbase|length|PM base|length|PB SB MB\n"); - - while (i && readb(one_slot + SECONDARY_BUS)) { - u8 dev_func = readb(one_slot + DEV_FUNC); - u8 primary_bus = readb(one_slot + PRIMARY_BUS); - u8 secondary_bus = readb(one_slot + SECONDARY_BUS); - u8 max_bus = readb(one_slot + MAX_BUS); - u16 io_base = readw(one_slot + IO_BASE); - u16 io_length = readw(one_slot + IO_LENGTH); - u16 mem_base = readw(one_slot + MEM_BASE); - u16 mem_length = readw(one_slot + MEM_LENGTH); - u16 pre_mem_base = readw(one_slot + PRE_MEM_BASE); - u16 pre_mem_length = readw(one_slot + PRE_MEM_LENGTH); - - dbg("%2.2x | %4.4x | %4.4x | %4.4x | %4.4x | %4.4x | %4.4x |%2.2x %2.2x %2.2x\n", - dev_func, io_base, io_length, mem_base, mem_length, pre_mem_base, pre_mem_length, - primary_bus, secondary_bus, max_bus); - - /* If this entry isn't for our controller's bus, ignore it */ - if (primary_bus != ctrl->slot_bus) { - i--; - one_slot += sizeof(struct slot_rt); - continue; - } - /* find out if this entry is for an occupied slot */ - temp_dword = 0xFFFFFFFF; - pci_bus->number = primary_bus; - pci_bus_read_config_dword(pci_bus, dev_func, PCI_VENDOR_ID, &temp_dword); - - dbg("temp_D_word = %x\n", temp_dword); - - if (temp_dword != 0xFFFFFFFF) { - index = 0; - func = shpchp_slot_find(primary_bus, dev_func >> 3, 0); - - while (func && (func->function != (dev_func & 0x07))) { - dbg("func = %p b:d:f(%x:%x:%x)\n", func, primary_bus, dev_func >> 3, index); - func = shpchp_slot_find(primary_bus, dev_func >> 3, index++); - } - - /* If we can't find a match, skip this table entry */ - if (!func) { - i--; - one_slot += sizeof(struct slot_rt); - continue; - } - /* this may not work and shouldn't be used */ - if (secondary_bus != primary_bus) - bridged_slot = 1; - else - bridged_slot = 0; - - populated_slot = 1; - } else { - populated_slot = 0; - bridged_slot = 0; - } - dbg("slot populated =%s \n", populated_slot?"yes":"no"); - - /* If we've got a valid IO base, use it */ - - temp_ulong = io_base + io_length; - - if ((io_base) && (temp_ulong <= 0x10000)) { - io_node = (struct pci_resource *) kmalloc(sizeof(struct pci_resource), GFP_KERNEL); - if (!io_node) - return -ENOMEM; - - io_node->base = (ulong)io_base; - io_node->length = (ulong)io_length; - dbg("found io_node(base, length) = %x, %x\n", io_node->base, io_node->length); - - if (!populated_slot) { - io_node->next = ctrl->io_head; - ctrl->io_head = io_node; - } else { - io_node->next = func->io_head; - func->io_head = io_node; - } - } - - /* If we've got a valid memory base, use it */ - temp_ulong = mem_base + mem_length; - if ((mem_base) && (temp_ulong <= 0x10000)) { - mem_node = (struct pci_resource *) kmalloc(sizeof(struct pci_resource), GFP_KERNEL); - if (!mem_node) - return -ENOMEM; - - mem_node->base = (ulong)mem_base << 16; - mem_node->length = (ulong)(mem_length << 16); - dbg("found mem_node(base, length) = %x, %x\n", mem_node->base, mem_node->length); - - if (!populated_slot) { - mem_node->next = ctrl->mem_head; - ctrl->mem_head = mem_node; - } else { - mem_node->next = func->mem_head; - func->mem_head = mem_node; - } - } - - /* - * If we've got a valid prefetchable memory base, and - * the base + length isn't greater than 0xFFFF - */ - temp_ulong = pre_mem_base + pre_mem_length; - if ((pre_mem_base) && (temp_ulong <= 0x10000)) { - p_mem_node = (struct pci_resource *) kmalloc(sizeof(struct pci_resource), GFP_KERNEL); - if (!p_mem_node) - return -ENOMEM; - - p_mem_node->base = (ulong)pre_mem_base << 16; - p_mem_node->length = (ulong)pre_mem_length << 16; - dbg("found p_mem_node(base, length) = %x, %x\n", p_mem_node->base, p_mem_node->length); - - if (!populated_slot) { - p_mem_node->next = ctrl->p_mem_head; - ctrl->p_mem_head = p_mem_node; - } else { - p_mem_node->next = func->p_mem_head; - func->p_mem_head = p_mem_node; - } - } - - /* - * If we've got a valid bus number, use it - * The second condition is to ignore bus numbers on - * populated slots that don't have PCI-PCI bridges - */ - if (secondary_bus && (secondary_bus != primary_bus)) { - bus_node = (struct pci_resource *) kmalloc(sizeof(struct pci_resource), GFP_KERNEL); - if (!bus_node) - return -ENOMEM; - - bus_node->base = (ulong)secondary_bus; - bus_node->length = (ulong)(max_bus - secondary_bus + 1); - dbg("found bus_node(base, length) = %x, %x\n", bus_node->base, bus_node->length); - - if (!populated_slot) { - bus_node->next = ctrl->bus_head; - ctrl->bus_head = bus_node; - } else { - bus_node->next = func->bus_head; - func->bus_head = bus_node; - } - } - - i--; - one_slot += sizeof(struct slot_rt); - } - - /* If all of the following fail, we don't have any resources for hot plug add */ - rc = 1; - rc &= shpchp_resource_sort_and_combine(&(ctrl->mem_head)); - rc &= shpchp_resource_sort_and_combine(&(ctrl->p_mem_head)); - rc &= shpchp_resource_sort_and_combine(&(ctrl->io_head)); - rc &= shpchp_resource_sort_and_combine(&(ctrl->bus_head)); - - return (rc); -} - int shpchprm_set_hpp( struct controller *ctrl, struct pci_func *func, @@ -413,12 +125,6 @@ void shpchprm_enable_card( static int legacy_shpchprm_init_pci(void) { - shpchp_rom_start = ioremap(ROM_PHY_ADDR, ROM_PHY_LEN); - if (!shpchp_rom_start) { - err("Could not ioremap memory region for ROM\n"); - return -EIO; - } - return 0; } -- cgit v1.2.2