From fd803241744ad6e4262b6588c6af89e8fb794098 Mon Sep 17 00:00:00 2001 From: Jeff Kirsher Date: Tue, 13 Dec 2005 00:06:22 -0500 Subject: e1000: Fixes for 8357x - TSO workaround - Fixes eeprom version reporting - Fix loopback test - Fix for WOL Signed-off-by: Jeff Kirsher Signed-off-by: John Ronciak Signed-off-by: Jesse Brandeburg --- drivers/net/e1000/e1000.h | 4 +- drivers/net/e1000/e1000_ethtool.c | 95 +++++++++++++++++++++++++++++---------- drivers/net/e1000/e1000_hw.c | 67 +++++++++++++++++++-------- drivers/net/e1000/e1000_hw.h | 4 +- drivers/net/e1000/e1000_main.c | 64 ++++++++++---------------- 5 files changed, 150 insertions(+), 84 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h index 3f653a93e1bc..e02e9ba2e18b 100644 --- a/drivers/net/e1000/e1000.h +++ b/drivers/net/e1000/e1000.h @@ -188,11 +188,13 @@ struct e1000_tx_ring { /* array of buffer information structs */ struct e1000_buffer *buffer_info; - struct e1000_buffer previous_buffer_info; spinlock_t tx_lock; uint16_t tdh; uint16_t tdt; uint64_t pkt; + + boolean_t last_tx_tso; + }; struct e1000_rx_ring { diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index 8646914964e7..c88f1a3c1b1d 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -562,10 +562,29 @@ e1000_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *drvinfo) { struct e1000_adapter *adapter = netdev_priv(netdev); + char firmware_version[32]; + uint16_t eeprom_data; strncpy(drvinfo->driver, e1000_driver_name, 32); strncpy(drvinfo->version, e1000_driver_version, 32); - strncpy(drvinfo->fw_version, "N/A", 32); + + /* EEPROM image version # is reported as firware version # for + * 8257{1|2|3} controllers */ + e1000_read_eeprom(&adapter->hw, 5, 1, &eeprom_data); + switch (adapter->hw.mac_type) { + case e1000_82571: + case e1000_82572: + case e1000_82573: + sprintf(firmware_version, "%d.%d-%d", + (eeprom_data & 0xF000) >> 12, + (eeprom_data & 0x0FF0) >> 4, + eeprom_data & 0x000F); + break; + default: + sprintf(firmware_version, "n/a"); + } + + strncpy(drvinfo->fw_version, firmware_version, 32); strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32); drvinfo->n_stats = E1000_STATS_LEN; drvinfo->testinfo_len = E1000_TEST_LEN; @@ -1309,21 +1328,32 @@ static int e1000_setup_loopback_test(struct e1000_adapter *adapter) { uint32_t rctl; + struct e1000_hw *hw = &adapter->hw; - if(adapter->hw.media_type == e1000_media_type_fiber || - adapter->hw.media_type == e1000_media_type_internal_serdes) { - if(adapter->hw.mac_type == e1000_82545 || - adapter->hw.mac_type == e1000_82546 || - adapter->hw.mac_type == e1000_82545_rev_3 || - adapter->hw.mac_type == e1000_82546_rev_3) + if (hw->media_type == e1000_media_type_fiber || + hw->media_type == e1000_media_type_internal_serdes) { + switch (hw->mac_type) { + case e1000_82545: + case e1000_82546: + case e1000_82545_rev_3: + case e1000_82546_rev_3: return e1000_set_phy_loopback(adapter); - else { - rctl = E1000_READ_REG(&adapter->hw, RCTL); + break; + case e1000_82571: + case e1000_82572: +#define E1000_SERDES_LB_ON 0x410 + e1000_set_phy_loopback(adapter); + E1000_WRITE_REG(hw, SCTL, E1000_SERDES_LB_ON); + msec_delay(10); + return 0; + break; + default: + rctl = E1000_READ_REG(hw, RCTL); rctl |= E1000_RCTL_LBM_TCVR; - E1000_WRITE_REG(&adapter->hw, RCTL, rctl); + E1000_WRITE_REG(hw, RCTL, rctl); return 0; } - } else if(adapter->hw.media_type == e1000_media_type_copper) + } else if (hw->media_type == e1000_media_type_copper) return e1000_set_phy_loopback(adapter); return 7; @@ -1334,25 +1364,36 @@ e1000_loopback_cleanup(struct e1000_adapter *adapter) { uint32_t rctl; uint16_t phy_reg; + struct e1000_hw *hw = &adapter->hw; rctl = E1000_READ_REG(&adapter->hw, RCTL); rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC); E1000_WRITE_REG(&adapter->hw, RCTL, rctl); - if(adapter->hw.media_type == e1000_media_type_copper || - ((adapter->hw.media_type == e1000_media_type_fiber || - adapter->hw.media_type == e1000_media_type_internal_serdes) && - (adapter->hw.mac_type == e1000_82545 || - adapter->hw.mac_type == e1000_82546 || - adapter->hw.mac_type == e1000_82545_rev_3 || - adapter->hw.mac_type == e1000_82546_rev_3))) { - adapter->hw.autoneg = TRUE; - e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &phy_reg); - if(phy_reg & MII_CR_LOOPBACK) { + switch (hw->mac_type) { + case e1000_82571: + case e1000_82572: + if (hw->media_type == e1000_media_type_fiber || + hw->media_type == e1000_media_type_internal_serdes){ +#define E1000_SERDES_LB_OFF 0x400 + E1000_WRITE_REG(hw, SCTL, E1000_SERDES_LB_OFF); + msec_delay(10); + break; + } + /* fall thru for Cu adapters */ + case e1000_82545: + case e1000_82546: + case e1000_82545_rev_3: + case e1000_82546_rev_3: + default: + hw->autoneg = TRUE; + e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg); + if (phy_reg & MII_CR_LOOPBACK) { phy_reg &= ~MII_CR_LOOPBACK; - e1000_write_phy_reg(&adapter->hw, PHY_CTRL, phy_reg); - e1000_phy_reset(&adapter->hw); + e1000_write_phy_reg(hw, PHY_CTRL, phy_reg); + e1000_phy_reset(hw); } + break; } } @@ -1681,6 +1722,14 @@ e1000_phys_id(struct net_device *netdev, uint32_t data) msleep_interruptible(data * 1000); del_timer_sync(&adapter->blink_timer); } + else if(adapter->hw.mac_type < e1000_82573) { + E1000_WRITE_REG(&adapter->hw, LEDCTL, (E1000_LEDCTL_LED2_BLINK_RATE | + E1000_LEDCTL_LED0_BLINK | E1000_LEDCTL_LED2_BLINK | + (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED2_MODE_SHIFT) | + (E1000_LEDCTL_MODE_LINK_ACTIVITY << E1000_LEDCTL_LED0_MODE_SHIFT) | + (E1000_LEDCTL_MODE_LED_OFF << E1000_LEDCTL_LED1_MODE_SHIFT))); + msleep_interruptible(data * 1000); + } else { E1000_WRITE_REG(&adapter->hw, LEDCTL, (E1000_LEDCTL_LED2_BLINK_RATE | E1000_LEDCTL_LED1_BLINK | E1000_LEDCTL_LED2_BLINK | diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index a267c5235fc0..136fc031e4ad 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -563,11 +563,13 @@ e1000_reset_hw(struct e1000_hw *hw) msec_delay(20); break; case e1000_82573: - udelay(10); - ctrl_ext = E1000_READ_REG(hw, CTRL_EXT); - ctrl_ext |= E1000_CTRL_EXT_EE_RST; - E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext); - E1000_WRITE_FLUSH(hw); + if (e1000_is_onboard_nvm_eeprom(hw) == FALSE) { + udelay(10); + ctrl_ext = E1000_READ_REG(hw, CTRL_EXT); + ctrl_ext |= E1000_CTRL_EXT_EE_RST; + E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext); + E1000_WRITE_FLUSH(hw); + } /* fall through */ case e1000_82571: case e1000_82572: @@ -844,19 +846,27 @@ e1000_setup_link(struct e1000_hw *hw) * control setting, then the variable hw->fc will * be initialized based on a value in the EEPROM. */ - if(e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data)) { - DEBUGOUT("EEPROM Read Error\n"); - return -E1000_ERR_EEPROM; - } - - if(hw->fc == e1000_fc_default) { - if((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) == 0) - hw->fc = e1000_fc_none; - else if((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) == - EEPROM_WORD0F_ASM_DIR) - hw->fc = e1000_fc_tx_pause; - else + if (hw->fc == e1000_fc_default) { + switch (hw->mac_type) { + case e1000_82573: hw->fc = e1000_fc_full; + break; + default: + ret_val = e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG, + 1, &eeprom_data); + if (ret_val) { + DEBUGOUT("EEPROM Read Error\n"); + return -E1000_ERR_EEPROM; + } + if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) == 0) + hw->fc = e1000_fc_none; + else if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) == + EEPROM_WORD0F_ASM_DIR) + hw->fc = e1000_fc_tx_pause; + else + hw->fc = e1000_fc_full; + break; + } } /* We want to save off the original Flow Control configuration just @@ -2962,13 +2972,22 @@ e1000_phy_hw_reset(struct e1000_hw *hw) if(hw->mac_type > e1000_82543) { /* Read the device control register and assert the E1000_CTRL_PHY_RST * bit. Then, take it out of reset. + * For pre-e1000_82571 hardware, we delay for 10ms between the assert + * and deassert. For e1000_82571 hardware and later, we instead delay + * for 10ms after the deassertion. */ ctrl = E1000_READ_REG(hw, CTRL); E1000_WRITE_REG(hw, CTRL, ctrl | E1000_CTRL_PHY_RST); E1000_WRITE_FLUSH(hw); - msec_delay(10); + + if (hw->mac_type < e1000_82571) + msec_delay(10); + E1000_WRITE_REG(hw, CTRL, ctrl); E1000_WRITE_FLUSH(hw); + + if (hw->mac_type >= e1000_82571) + msec_delay(10); } else { /* Read the Extended Device Control Register, assert the PHY_RESET_DIR * bit to put the PHY into reset. Then, take it out of reset. @@ -5278,9 +5297,13 @@ e1000_get_bus_info(struct e1000_hw *hw) hw->bus_speed = e1000_bus_speed_unknown; hw->bus_width = e1000_bus_width_unknown; break; - case e1000_82571: case e1000_82572: case e1000_82573: + hw->bus_type = e1000_bus_type_pci_express; + hw->bus_speed = e1000_bus_speed_2500; + hw->bus_width = e1000_bus_width_pciex_1; + break; + case e1000_82571: hw->bus_type = e1000_bus_type_pci_express; hw->bus_speed = e1000_bus_speed_2500; hw->bus_width = e1000_bus_width_pciex_4; @@ -6650,6 +6673,12 @@ e1000_get_auto_rd_done(struct e1000_hw *hw) break; } + /* PHY configuration from NVM just starts after EECD_AUTO_RD sets to high. + * Need to wait for PHY configuration completion before accessing NVM + * and PHY. */ + if (hw->mac_type == e1000_82573) + msec_delay(25); + return E1000_SUCCESS; } diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h index 76ce12809a11..7caa35748cea 100644 --- a/drivers/net/e1000/e1000_hw.h +++ b/drivers/net/e1000/e1000_hw.h @@ -123,6 +123,7 @@ typedef enum { e1000_bus_width_32, e1000_bus_width_64, e1000_bus_width_pciex_1, + e1000_bus_width_pciex_2, e1000_bus_width_pciex_4, e1000_bus_width_reserved } e1000_bus_width; @@ -149,6 +150,7 @@ typedef enum { e1000_igp_cable_length_90 = 90, e1000_igp_cable_length_100 = 100, e1000_igp_cable_length_110 = 110, + e1000_igp_cable_length_115 = 115, e1000_igp_cable_length_120 = 120, e1000_igp_cable_length_130 = 130, e1000_igp_cable_length_140 = 140, @@ -1457,6 +1459,7 @@ struct e1000_hw { #define E1000_EECD_AUPDEN 0x00100000 /* Enable Autonomous FLASH update */ #define E1000_EECD_SHADV 0x00200000 /* Shadow RAM Data Valid */ #define E1000_EECD_SEC1VAL 0x00400000 /* Sector One Valid */ +#define E1000_EECD_SECVAL_SHIFT 22 #define E1000_STM_OPCODE 0xDB00 #define E1000_HICR_FW_RESET 0xC0 @@ -1951,7 +1954,6 @@ struct e1000_host_command_info { #define E1000_MDALIGN 4096 -#define E1000_GCR_BEM32 0x00400000 #define E1000_GCR_L1_ACT_WITHOUT_L0S_RX 0x08000000 /* Function Active and Power State to MNG */ #define E1000_FACTPS_FUNC0_POWER_STATE_MASK 0x00000003 diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index e0ae248b4313..438a931fd55d 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -711,6 +711,7 @@ e1000_probe(struct pci_dev *pdev, break; case e1000_82546: case e1000_82546_rev_3: + case e1000_82571: if((E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_FUNC_1) && (adapter->hw.media_type == e1000_media_type_copper)) { e1000_read_eeprom(&adapter->hw, @@ -1158,7 +1159,6 @@ e1000_setup_tx_resources(struct e1000_adapter *adapter, return -ENOMEM; } memset(txdr->buffer_info, 0, size); - memset(&txdr->previous_buffer_info, 0, sizeof(struct e1000_buffer)); /* round up to nearest 4K */ @@ -1813,11 +1813,6 @@ e1000_clean_tx_ring(struct e1000_adapter *adapter, /* Free all the Tx ring sk_buffs */ - if (likely(tx_ring->previous_buffer_info.skb != NULL)) { - e1000_unmap_and_free_tx_resource(adapter, - &tx_ring->previous_buffer_info); - } - for(i = 0; i < tx_ring->count; i++) { buffer_info = &tx_ring->buffer_info[i]; e1000_unmap_and_free_tx_resource(adapter, buffer_info); @@ -1832,6 +1827,7 @@ e1000_clean_tx_ring(struct e1000_adapter *adapter, tx_ring->next_to_use = 0; tx_ring->next_to_clean = 0; + tx_ring->last_tx_tso = 0; writel(0, adapter->hw.hw_addr + tx_ring->tdh); writel(0, adapter->hw.hw_addr + tx_ring->tdt); @@ -2437,6 +2433,16 @@ e1000_tx_map(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring, buffer_info = &tx_ring->buffer_info[i]; size = min(len, max_per_txd); #ifdef NETIF_F_TSO + /* Workaround for Controller erratum -- + * descriptor for non-tso packet in a linear SKB that follows a + * tso gets written back prematurely before the data is fully + * DMAd to the controller */ + if (!skb->data_len && tx_ring->last_tx_tso && + !skb_shinfo(skb)->tso_size) { + tx_ring->last_tx_tso = 0; + size -= 4; + } + /* Workaround for premature desc write-backs * in TSO mode. Append 4-byte sentinel desc */ if(unlikely(mss && !nr_frags && size == len && size > 8)) @@ -2693,6 +2699,14 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) if(skb->ip_summed == CHECKSUM_HW) count++; #endif + +#ifdef NETIF_F_TSO + /* Controller Erratum workaround */ + if (!skb->data_len && tx_ring->last_tx_tso && + !skb_shinfo(skb)->tso_size) + count++; +#endif + count += TXD_USE_COUNT(len, max_txd_pwr); if(adapter->pcix_82544) @@ -2774,9 +2788,10 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) return NETDEV_TX_OK; } - if (likely(tso)) + if (likely(tso)) { + tx_ring->last_tx_tso = 1; tx_flags |= E1000_TX_FLAGS_TSO; - else if (likely(e1000_tx_csum(adapter, tx_ring, skb))) + } else if (likely(e1000_tx_csum(adapter, tx_ring, skb))) tx_flags |= E1000_TX_FLAGS_CSUM; /* Old method was to assume IPv4 packet by default if TSO was enabled. @@ -3227,37 +3242,12 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter, eop_desc = E1000_TX_DESC(*tx_ring, eop); while (eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) { - /* Premature writeback of Tx descriptors clear (free buffers - * and unmap pci_mapping) previous_buffer_info */ - if (likely(tx_ring->previous_buffer_info.skb != NULL)) { - e1000_unmap_and_free_tx_resource(adapter, - &tx_ring->previous_buffer_info); - } - for(cleaned = FALSE; !cleaned; ) { tx_desc = E1000_TX_DESC(*tx_ring, i); buffer_info = &tx_ring->buffer_info[i]; cleaned = (i == eop); -#ifdef NETIF_F_TSO - if (!(netdev->features & NETIF_F_TSO)) { -#endif - e1000_unmap_and_free_tx_resource(adapter, - buffer_info); -#ifdef NETIF_F_TSO - } else { - if (cleaned) { - memcpy(&tx_ring->previous_buffer_info, - buffer_info, - sizeof(struct e1000_buffer)); - memset(buffer_info, 0, - sizeof(struct e1000_buffer)); - } else { - e1000_unmap_and_free_tx_resource( - adapter, buffer_info); - } - } -#endif + e1000_unmap_and_free_tx_resource(adapter, buffer_info); tx_desc->buffer_addr = 0; tx_desc->lower.data = 0; @@ -3318,12 +3308,6 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter, netif_stop_queue(netdev); } } -#ifdef NETIF_F_TSO - if (unlikely(!(eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) && - time_after(jiffies, tx_ring->previous_buffer_info.time_stamp + HZ))) - e1000_unmap_and_free_tx_resource( - adapter, &tx_ring->previous_buffer_info); -#endif return cleaned; } -- cgit v1.2.2