From 8527bec548e01a29c6d1928d20d6d3be71861482 Mon Sep 17 00:00:00 2001 From: "Ira W. Snyder" Date: Mon, 26 Jan 2009 21:00:33 -0800 Subject: virtio_net: use correct accessors for scatterlists Without this fix, virtio_net makes incorrect usage of scatterlists. It sets the end of the scatterlist chain after the first element, despite the fact that more entries come after it. If you try to run dma_map_sg() on one of the scatterlists given to you by add_buf(), you will get a null pointer oops. Signed-off-by: Ira W. Snyder Signed-off-by: Rusty Russell Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 63ef2a8905fb..c68808336c8c 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -287,7 +287,7 @@ static void try_fill_recv_maxbufs(struct virtnet_info *vi) skb_put(skb, MAX_PACKET_LEN); hdr = skb_vnet_hdr(skb); - sg_init_one(sg, hdr, sizeof(*hdr)); + sg_set_buf(sg, hdr, sizeof(*hdr)); if (vi->big_packets) { for (i = 0; i < MAX_SKB_FRAGS; i++) { @@ -488,9 +488,9 @@ static int xmit_skb(struct virtnet_info *vi, struct sk_buff *skb) /* Encode metadata header at front. */ if (vi->mergeable_rx_bufs) - sg_init_one(sg, mhdr, sizeof(*mhdr)); + sg_set_buf(sg, mhdr, sizeof(*mhdr)); else - sg_init_one(sg, hdr, sizeof(*hdr)); + sg_set_buf(sg, hdr, sizeof(*hdr)); num = skb_to_sgvec(skb, sg+1, 0, skb->len) + 1; -- cgit v1.2.2 From a7a41acf99d9150b424839b0d7b4f5ad9d211e2d Mon Sep 17 00:00:00 2001 From: Manish Katiyar Date: Mon, 26 Jan 2009 21:54:21 -0800 Subject: r6040: Remove unused variable pdev from drivers/net/r6040.c drivers/net/r6040.c:441: warning: unused variable 'pdev' Signed-off-by: Manish Katiyar Signed-off-by: David S. Miller --- drivers/net/r6040.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c index 72fd9e97c190..b2dcdb5ed8bd 100644 --- a/drivers/net/r6040.c +++ b/drivers/net/r6040.c @@ -438,7 +438,6 @@ static void r6040_down(struct net_device *dev) { struct r6040_private *lp = netdev_priv(dev); void __iomem *ioaddr = lp->base; - struct pci_dev *pdev = lp->pdev; int limit = 2048; u16 *adrp; u16 cmd; -- cgit v1.2.2 From 15b2bee22a0390d951301b53e83df88d0350c499 Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Tue, 27 Jan 2009 16:41:58 -0800 Subject: e1000: fix bug with shared interrupt during reset A nasty bug was found where an MTU change (or anything else that caused a reset) could race with the interrupt code. The interrupt code was entered by a shared interrupt during the MTU change. This change prevents the interrupt code from running while the driver is in the middle of its reset path. Signed-off-by: Jesse Brandeburg Signed-off-by: David S. Miller --- drivers/net/e1000/e1000_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 26474c92193f..c986978ce761 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -31,7 +31,7 @@ char e1000_driver_name[] = "e1000"; static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver"; -#define DRV_VERSION "7.3.20-k3-NAPI" +#define DRV_VERSION "7.3.21-k3-NAPI" const char e1000_driver_version[] = DRV_VERSION; static const char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation."; @@ -3712,7 +3712,7 @@ static irqreturn_t e1000_intr(int irq, void *data) struct e1000_hw *hw = &adapter->hw; u32 rctl, icr = er32(ICR); - if (unlikely(!icr)) + if (unlikely((!icr) || test_bit(__E1000_RESETTING, &adapter->flags))) return IRQ_NONE; /* Not our interrupt */ /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is -- cgit v1.2.2 From eb83bbf57429ab80f49b413e3e44d3b19c3fdc5a Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Tue, 27 Jan 2009 12:31:23 -0600 Subject: rtl8187: Fix error in setting OFDM power settings for RTL8187L MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit After reports of poor performance, a review of the latest vendor driver (rtl8187_linux_26.1025.0328.2007) for RTL8187L devices was undertaken. A difference was found in the code used to index the OFDM power tables. When the Linux driver was changed, my unit works at a much greater range than before. I think this fixes Bugzilla #12380 and has been tested by at least two other users. Signed-off-by: Larry Finger Tested-by: Martín Ernesto Barreyro Cc: Stable Signed-off-by: John W. Linville --- drivers/net/wireless/rtl818x/rtl8187_rtl8225.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c b/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c index 4e75e8e7fa90..78df281b297a 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c +++ b/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c @@ -285,7 +285,10 @@ static void rtl8225_rf_set_tx_power(struct ieee80211_hw *dev, int channel) ofdm_power = priv->channels[channel - 1].hw_value >> 4; cck_power = min(cck_power, (u8)11); - ofdm_power = min(ofdm_power, (u8)35); + if (ofdm_power > (u8)15) + ofdm_power = 25; + else + ofdm_power += 10; rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK, rtl8225_tx_gain_cck_ofdm[cck_power / 6] >> 1); @@ -536,7 +539,10 @@ static void rtl8225z2_rf_set_tx_power(struct ieee80211_hw *dev, int channel) cck_power += priv->txpwr_base & 0xF; cck_power = min(cck_power, (u8)35); - ofdm_power = min(ofdm_power, (u8)15); + if (ofdm_power > (u8)15) + ofdm_power = 25; + else + ofdm_power += 10; ofdm_power += priv->txpwr_base >> 4; ofdm_power = min(ofdm_power, (u8)35); -- cgit v1.2.2 From 1f304e4e3bb161163d9f5bc3c6467a2a6fa9b3ae Mon Sep 17 00:00:00 2001 From: "Zhu, Yi" Date: Fri, 23 Jan 2009 13:45:22 -0800 Subject: iwlwifi: fix kernel oops when ucode DMA memory allocation failure The patch fixes memcpy to NULL address when the ucode DMA allocation failure. This is a fix to bug http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1861 Signed-off-by: Zhu Yi Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 0dc8eed16404..b35c8813bef4 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -1719,6 +1719,10 @@ static int iwl_read_ucode(struct iwl_priv *priv) priv->ucode_data_backup.len = data_size; iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data_backup); + if (!priv->ucode_code.v_addr || !priv->ucode_data.v_addr || + !priv->ucode_data_backup.v_addr) + goto err_pci_alloc; + /* Initialization instructions and data */ if (init_size && init_data_size) { priv->ucode_init.len = init_size; -- cgit v1.2.2 From be0093705c3ce98d73cac0ca8f93ea105cdf4e9c Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Thu, 22 Jan 2009 08:44:16 -0500 Subject: ath5k: fix locking in ath5k_config ath5k_config updates the software context without taking sc->lock. Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bob Copeland Acked-by: Nick Kossifidis Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/base.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index 8ef87356e083..a533ed60bb4d 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -1028,6 +1028,8 @@ ath5k_setup_bands(struct ieee80211_hw *hw) * it's done by reseting the chip. To accomplish this we must * first cleanup any pending DMA, then restart stuff after a la * ath5k_init. + * + * Called with sc->lock. */ static int ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan) @@ -2814,11 +2816,17 @@ ath5k_config(struct ieee80211_hw *hw, u32 changed) { struct ath5k_softc *sc = hw->priv; struct ieee80211_conf *conf = &hw->conf; + int ret; + + mutex_lock(&sc->lock); sc->bintval = conf->beacon_int; sc->power_level = conf->power_level; - return ath5k_chan_set(sc, conf->channel); + ret = ath5k_chan_set(sc, conf->channel); + + mutex_unlock(&sc->lock); + return ret; } static int -- cgit v1.2.2 From e125646ab56b490d0390b158e0afa9cccfc1f897 Mon Sep 17 00:00:00 2001 From: Dhananjay Phadke Date: Thu, 29 Jan 2009 16:05:19 -0800 Subject: netxen: revert jumbo ringsize Reducing jumbo ring size below 1024 reduces throughput for old firmwares (3.4.216 and older) running on older (NX2031) chip, so restore it back to 1024. This was reduced in commit 32ec803348b4d5f1353e1d7feae30880b8b3e342 ("netxen: reduce memory footprint"). Raising jumbo ring size from 512 to 1024, adds ~4MB per port, but there's still big saving because of original patch (~20MB per port). Signed-off-by: Dhananjay Phadke Signed-off-by: David S. Miller --- drivers/net/netxen/netxen_nic.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h index a75a31005fd3..9c78c963b721 100644 --- a/drivers/net/netxen/netxen_nic.h +++ b/drivers/net/netxen/netxen_nic.h @@ -210,7 +210,7 @@ #define MAX_CMD_DESCRIPTORS_HOST 1024 #define MAX_RCV_DESCRIPTORS_1G 2048 #define MAX_RCV_DESCRIPTORS_10G 4096 -#define MAX_JUMBO_RCV_DESCRIPTORS 512 +#define MAX_JUMBO_RCV_DESCRIPTORS 1024 #define MAX_LRO_RCV_DESCRIPTORS 8 #define MAX_RCVSTATUS_DESCRIPTORS MAX_RCV_DESCRIPTORS #define MAX_JUMBO_RCV_DESC MAX_JUMBO_RCV_DESCRIPTORS -- cgit v1.2.2 From 584dbe9475313e117abf9d2af88164edfd429c9a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Daniel=20Marjam=C3=A4ki?= Date: Thu, 29 Jan 2009 08:55:56 +0000 Subject: netxen: fix memory leak in drivers/net/netxen_nic_init.c MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit For kernel bugzilla #12537: http://bugzilla.kernel.org/show_bug.cgi?id=12537 Free memory. Signed-off-by: Daniel Marjamäki Signed-off-by: David S. Miller --- drivers/net/netxen/netxen_nic_init.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c index ca7c8d8050c9..ffd37bea1628 100644 --- a/drivers/net/netxen/netxen_nic_init.c +++ b/drivers/net/netxen/netxen_nic_init.c @@ -947,8 +947,10 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose) } for (i = 0; i < n; i++) { if (netxen_rom_fast_read(adapter, 8*i + 4*offset, &val) != 0 || - netxen_rom_fast_read(adapter, 8*i + 4*offset + 4, &addr) != 0) + netxen_rom_fast_read(adapter, 8*i + 4*offset + 4, &addr) != 0) { + kfree(buf); return -EIO; + } buf[i].addr = addr; buf[i].data = val; -- cgit v1.2.2 From 1af7ad51049d6a310a19d497960597198290ddfa Mon Sep 17 00:00:00 2001 From: Inaky Perez-Gonzalez Date: Thu, 29 Jan 2009 17:18:31 -0800 Subject: wimax: fix build issue when debugfs is disabled MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As reported by Toralf Förster and Randy Dunlap. - http://linuxwimax.org/pipermail/wimax/2009-January/000460.html - http://lkml.org/lkml/2009/1/29/279 The definitions needed for the wimax stack and i2400m driver debug infrastructure was, by mistake, compiled depending on CONFIG_DEBUG_FS (by them being placed in the debugfs.c files); thus the build broke in 2.6.29-rc3 when debugging was enabled (CONFIG_WIMAX_DEBUG) and DEBUG_FS was disabled. These definitions are always needed if debug is enabled at compile time (independently of DEBUG_FS being or not enabled), so moving them to a file that is always compiled fixes the issue. Signed-off-by: Inaky Perez-Gonzalez Signed-off-by: David S. Miller --- drivers/net/wimax/i2400m/debugfs.c | 14 -------------- drivers/net/wimax/i2400m/driver.c | 16 ++++++++++++++++ 2 files changed, 16 insertions(+), 14 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wimax/i2400m/debugfs.c b/drivers/net/wimax/i2400m/debugfs.c index 626632985977..9b81af3f80a9 100644 --- a/drivers/net/wimax/i2400m/debugfs.c +++ b/drivers/net/wimax/i2400m/debugfs.c @@ -234,20 +234,6 @@ struct dentry *debugfs_create_i2400m_reset( &fops_i2400m_reset); } -/* - * Debug levels control; see debug.h - */ -struct d_level D_LEVEL[] = { - D_SUBMODULE_DEFINE(control), - D_SUBMODULE_DEFINE(driver), - D_SUBMODULE_DEFINE(debugfs), - D_SUBMODULE_DEFINE(fw), - D_SUBMODULE_DEFINE(netdev), - D_SUBMODULE_DEFINE(rfkill), - D_SUBMODULE_DEFINE(rx), - D_SUBMODULE_DEFINE(tx), -}; -size_t D_LEVEL_SIZE = ARRAY_SIZE(D_LEVEL); #define __debugfs_register(prefix, name, parent) \ do { \ diff --git a/drivers/net/wimax/i2400m/driver.c b/drivers/net/wimax/i2400m/driver.c index 5f98047e18cf..e80a0b65a754 100644 --- a/drivers/net/wimax/i2400m/driver.c +++ b/drivers/net/wimax/i2400m/driver.c @@ -707,6 +707,22 @@ void i2400m_release(struct i2400m *i2400m) EXPORT_SYMBOL_GPL(i2400m_release); +/* + * Debug levels control; see debug.h + */ +struct d_level D_LEVEL[] = { + D_SUBMODULE_DEFINE(control), + D_SUBMODULE_DEFINE(driver), + D_SUBMODULE_DEFINE(debugfs), + D_SUBMODULE_DEFINE(fw), + D_SUBMODULE_DEFINE(netdev), + D_SUBMODULE_DEFINE(rfkill), + D_SUBMODULE_DEFINE(rx), + D_SUBMODULE_DEFINE(tx), +}; +size_t D_LEVEL_SIZE = ARRAY_SIZE(D_LEVEL); + + static int __init i2400m_driver_init(void) { -- cgit v1.2.2 From b1c4a9dddf09fe99b8f88252718ac5b357363dc4 Mon Sep 17 00:00:00 2001 From: Haiying Wang Date: Thu, 29 Jan 2009 17:28:04 -0800 Subject: ucc_geth: Change uec phy id to the same format as gianfar's The commit b31a1d8b41513b96e9c7ec2f68c5734cef0b26a4 ("gianfar: Convert gianfar to an of_platform_driver") changes the gianfar's phy id to the format like "mdio@xxxx:xx", but uec still uses the old format like "xxxxxxxx:xx". For the board whose UEC uses gianfar-mdio like MPC8568MDS, the phy can not be attached because of the incompatible phy id format. This patch changes uec's phy id to the same format as gianfar's. Signed-off-by: Haiying Wang Signed-off-by: David S. Miller --- drivers/net/ucc_geth.c | 20 ++++++++++++++++++-- drivers/net/ucc_geth.h | 2 ++ drivers/net/ucc_geth_mii.c | 12 +++++++++++- drivers/net/ucc_geth_mii.h | 1 + 4 files changed, 32 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c index 11441225bf41..e87986867ba5 100644 --- a/drivers/net/ucc_geth.c +++ b/drivers/net/ucc_geth.c @@ -1536,6 +1536,11 @@ static void adjust_link(struct net_device *dev) static int init_phy(struct net_device *dev) { struct ucc_geth_private *priv = netdev_priv(dev); + struct device_node *np = priv->node; + struct device_node *phy, *mdio; + const phandle *ph; + char bus_name[MII_BUS_ID_SIZE]; + const unsigned int *id; struct phy_device *phydev; char phy_id[BUS_ID_SIZE]; @@ -1543,8 +1548,18 @@ static int init_phy(struct net_device *dev) priv->oldspeed = 0; priv->oldduplex = -1; - snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT, priv->ug_info->mdio_bus, - priv->ug_info->phy_address); + ph = of_get_property(np, "phy-handle", NULL); + phy = of_find_node_by_phandle(*ph); + mdio = of_get_parent(phy); + + id = of_get_property(phy, "reg", NULL); + + of_node_put(phy); + of_node_put(mdio); + + uec_mdio_bus_name(bus_name, mdio); + snprintf(phy_id, sizeof(phy_id), "%s:%02x", + bus_name, *id); phydev = phy_connect(dev, phy_id, &adjust_link, 0, priv->phy_interface); @@ -3748,6 +3763,7 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma ugeth->ug_info = ug_info; ugeth->dev = dev; + ugeth->node = np; return 0; } diff --git a/drivers/net/ucc_geth.h b/drivers/net/ucc_geth.h index 8f699cb773ee..16cbe42ba43c 100644 --- a/drivers/net/ucc_geth.h +++ b/drivers/net/ucc_geth.h @@ -1186,6 +1186,8 @@ struct ucc_geth_private { int oldspeed; int oldduplex; int oldlink; + + struct device_node *node; }; void uec_set_ethtool_ops(struct net_device *netdev); diff --git a/drivers/net/ucc_geth_mii.c b/drivers/net/ucc_geth_mii.c index c001d261366b..54635911305c 100644 --- a/drivers/net/ucc_geth_mii.c +++ b/drivers/net/ucc_geth_mii.c @@ -156,7 +156,7 @@ static int uec_mdio_probe(struct of_device *ofdev, const struct of_device_id *ma if (err) goto reg_map_fail; - snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", res.start); + uec_mdio_bus_name(new_bus->id, np); new_bus->irq = kmalloc(32 * sizeof(int), GFP_KERNEL); @@ -283,3 +283,13 @@ void uec_mdio_exit(void) { of_unregister_platform_driver(&uec_mdio_driver); } + +void uec_mdio_bus_name(char *name, struct device_node *np) +{ + const u32 *reg; + + reg = of_get_property(np, "reg", NULL); + + snprintf(name, MII_BUS_ID_SIZE, "%s@%x", np->name, reg ? *reg : 0); +} + diff --git a/drivers/net/ucc_geth_mii.h b/drivers/net/ucc_geth_mii.h index 1e45b2028a50..840cf80235b7 100644 --- a/drivers/net/ucc_geth_mii.h +++ b/drivers/net/ucc_geth_mii.h @@ -97,4 +97,5 @@ int uec_mdio_read(struct mii_bus *bus, int mii_id, int regnum); int uec_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value); int __init uec_mdio_init(void); void uec_mdio_exit(void); +void uec_mdio_bus_name(char *name, struct device_node *np); #endif /* __UEC_MII_H */ -- cgit v1.2.2 From 1609559547ae0ddc2e4829c7f78ac2c4869875b9 Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Thu, 29 Jan 2009 17:29:15 -0800 Subject: smsc9420: fix interrupt signalling test failures smsc9420 performs an interrupt signalling test when the interface is brought up. The current code mistakenly sets its test flag to false AFTER enabling the software interrupt source, making failure quite likely. This patch changes the code to set the test flag BEFORE enabling interrupts. I've also removed an smp_wmb because the following spinlock provides an implicit memory barrier. Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/smsc9420.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/smsc9420.c b/drivers/net/smsc9420.c index c14a4c6452c7..d801900a5036 100644 --- a/drivers/net/smsc9420.c +++ b/drivers/net/smsc9420.c @@ -1378,6 +1378,7 @@ static int smsc9420_open(struct net_device *dev) /* test the IRQ connection to the ISR */ smsc_dbg(IFUP, "Testing ISR using IRQ %d", dev->irq); + pd->software_irq_signal = false; spin_lock_irqsave(&pd->int_lock, flags); /* configure interrupt deassertion timer and enable interrupts */ @@ -1393,8 +1394,6 @@ static int smsc9420_open(struct net_device *dev) smsc9420_pci_flush_write(pd); timeout = 1000; - pd->software_irq_signal = false; - smp_wmb(); while (timeout--) { if (pd->software_irq_signal) break; -- cgit v1.2.2 From f307dbd88d82c4ccab7aec49613c366023b89cde Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Thu, 29 Jan 2009 17:30:00 -0800 Subject: smsc911x: timeout reaches -1 With a postfix decrement the timeout will reach -1 rather than 0, so the warning will not be issued. Signed-off-by: Roel Kluin Acked-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/smsc911x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c index f513bdf1c887..783c1a7b869e 100644 --- a/drivers/net/smsc911x.c +++ b/drivers/net/smsc911x.c @@ -953,7 +953,7 @@ smsc911x_rx_fastforward(struct smsc911x_data *pdata, unsigned int pktbytes) do { udelay(1); val = smsc911x_reg_read(pdata, RX_DP_CTRL); - } while (timeout-- && (val & RX_DP_CTRL_RX_FFWD_)); + } while (--timeout && (val & RX_DP_CTRL_RX_FFWD_)); if (unlikely(timeout == 0)) SMSC_WARNING(HW, "Timed out waiting for " -- cgit v1.2.2 From e5664bb2a7fd8ae1bee1281c2e44653c471af9ca Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 29 Jan 2009 17:31:13 -0800 Subject: gianfar: Fix Wake-on-LAN support commit 0f0ca340e57bd7446855fefd07a64249acf81223 ("phy: power management support") caused a regression in the gianfar driver. Now phylib turns off PHY power during suspend, and thus WOL doesn't work anymore. This patch workarounds the issue by enabling wakeup in the MDIO device, i.e. just restores the old behaviour for the gianfar driver. Note that this way all PHYs on a given MDIO bus won't be turned off during suspend, which isn't good from the power saving point of view. A proper, per netdevice wakeup management support will need a bit reworked phylib suspend/resume logic. Signed-off-by: Anton Vorontsov Signed-off-by: David S. Miller --- drivers/net/gianfar_mii.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/gianfar_mii.c b/drivers/net/gianfar_mii.c index f3706e415b45..f49a426ad681 100644 --- a/drivers/net/gianfar_mii.c +++ b/drivers/net/gianfar_mii.c @@ -234,6 +234,8 @@ static int gfar_mdio_probe(struct of_device *ofdev, if (NULL == new_bus) return -ENOMEM; + device_init_wakeup(&ofdev->dev, 1); + new_bus->name = "Gianfar MII Bus", new_bus->read = &gfar_mdio_read, new_bus->write = &gfar_mdio_write, -- cgit v1.2.2 From c25b9abbc2c2c0da88e180c3933d6e773245815a Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Thu, 29 Jan 2009 17:32:20 -0800 Subject: drivers/net/skfp: if !capable(CAP_NET_ADMIN): inverted logic Fix inverted logic Signed-off-by: Roel Kluin Signed-off-by: David S. Miller --- drivers/net/skfp/skfddi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/skfp/skfddi.c b/drivers/net/skfp/skfddi.c index 607efeaf0bc5..9a00e5566af7 100644 --- a/drivers/net/skfp/skfddi.c +++ b/drivers/net/skfp/skfddi.c @@ -1003,9 +1003,9 @@ static int skfp_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) break; case SKFP_CLR_STATS: /* Zero out the driver statistics */ if (!capable(CAP_NET_ADMIN)) { - memset(&lp->MacStat, 0, sizeof(lp->MacStat)); - } else { status = -EPERM; + } else { + memset(&lp->MacStat, 0, sizeof(lp->MacStat)); } break; default: -- cgit v1.2.2 From f99ec0649accb581cf3e8fcfeea796e82d05f4ea Mon Sep 17 00:00:00 2001 From: Philippe De Muyter Date: Thu, 29 Jan 2009 17:35:04 -0800 Subject: tulip: fix 21142 with 10Mbps without negotiation with current kernels, tulip 21142 ethernet controllers fail to connect to a 10Mbps only (i.e. without negotiation-partner) network. It used to work in 2.4 kernels. Fix that. Tested on a 21142 Rev 0x11. Signed-off-by: Philippe De Muyter Signed-off-by: David S. Miller --- drivers/net/tulip/21142.c | 23 +++++++++++++++++++---- 1 file changed, 19 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/tulip/21142.c b/drivers/net/tulip/21142.c index 1210fb3748a7..db7d5e11855d 100644 --- a/drivers/net/tulip/21142.c +++ b/drivers/net/tulip/21142.c @@ -9,6 +9,11 @@ Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html} for more information on this driver. + + DC21143 manual "21143 PCI/CardBus 10/100Mb/s Ethernet LAN Controller + Hardware Reference Manual" is currently available at : + http://developer.intel.com/design/network/manuals/278074.htm + Please submit bugs to http://bugzilla.kernel.org/ . */ @@ -32,7 +37,11 @@ void t21142_media_task(struct work_struct *work) int csr12 = ioread32(ioaddr + CSR12); int next_tick = 60*HZ; int new_csr6 = 0; + int csr14 = ioread32(ioaddr + CSR14); + /* CSR12[LS10,LS100] are not reliable during autonegotiation */ + if ((csr14 & 0x80) && (csr12 & 0x7000) != 0x5000) + csr12 |= 6; if (tulip_debug > 2) printk(KERN_INFO"%s: 21143 negotiation status %8.8x, %s.\n", dev->name, csr12, medianame[dev->if_port]); @@ -76,7 +85,7 @@ void t21142_media_task(struct work_struct *work) new_csr6 = 0x83860000; dev->if_port = 3; iowrite32(0, ioaddr + CSR13); - iowrite32(0x0003FF7F, ioaddr + CSR14); + iowrite32(0x0003FFFF, ioaddr + CSR14); iowrite16(8, ioaddr + CSR15); iowrite32(1, ioaddr + CSR13); } @@ -132,10 +141,14 @@ void t21142_lnk_change(struct net_device *dev, int csr5) struct tulip_private *tp = netdev_priv(dev); void __iomem *ioaddr = tp->base_addr; int csr12 = ioread32(ioaddr + CSR12); + int csr14 = ioread32(ioaddr + CSR14); + /* CSR12[LS10,LS100] are not reliable during autonegotiation */ + if ((csr14 & 0x80) && (csr12 & 0x7000) != 0x5000) + csr12 |= 6; if (tulip_debug > 1) printk(KERN_INFO"%s: 21143 link status interrupt %8.8x, CSR5 %x, " - "%8.8x.\n", dev->name, csr12, csr5, ioread32(ioaddr + CSR14)); + "%8.8x.\n", dev->name, csr12, csr5, csr14); /* If NWay finished and we have a negotiated partner capability. */ if (tp->nway && !tp->nwayset && (csr12 & 0x7000) == 0x5000) { @@ -143,7 +156,9 @@ void t21142_lnk_change(struct net_device *dev, int csr5) int negotiated = tp->sym_advertise & (csr12 >> 16); tp->lpar = csr12 >> 16; tp->nwayset = 1; - if (negotiated & 0x0100) dev->if_port = 5; + /* If partner cannot negotiate, it is 10Mbps Half Duplex */ + if (!(csr12 & 0x8000)) dev->if_port = 0; + else if (negotiated & 0x0100) dev->if_port = 5; else if (negotiated & 0x0080) dev->if_port = 3; else if (negotiated & 0x0040) dev->if_port = 4; else if (negotiated & 0x0020) dev->if_port = 0; @@ -214,7 +229,7 @@ void t21142_lnk_change(struct net_device *dev, int csr5) tp->timer.expires = RUN_AT(3*HZ); add_timer(&tp->timer); } else if (dev->if_port == 5) - iowrite32(ioread32(ioaddr + CSR14) & ~0x080, ioaddr + CSR14); + iowrite32(csr14 & ~0x080, ioaddr + CSR14); } else if (dev->if_port == 0 || dev->if_port == 4) { if ((csr12 & 4) == 0) printk(KERN_INFO"%s: 21143 10baseT link beat good.\n", -- cgit v1.2.2