From d9fb9f384292d848ad9db386bcf97f1e06e60264 Mon Sep 17 00:00:00 2001 From: Jeff Kirsher Date: Wed, 18 May 2011 05:14:22 -0700 Subject: *sonic/natsemi/ns83829: Move the National Semi-conductor drivers Move the National Semi-conductor drivers into drivers/net/ethernet/natsemi/ and make the necessary Kconfig and Makefile changes. Also moved the 8390 (National Semi-conductor) devices as a sub-menu of National Semi-conductor devices. - moved the ibmlana driver as well into this directory since it is a "SONIC" driver CC: Alfred Arnold CC: Thomas Bogendoerfer CC: Harald Welte CC: Tim Hockin CC: CC: Kevin Chea CC: Marc Gauthier CC: Chris Zankel Signed-off-by: Jeff Kirsher Acked-by: Marc Gauthier --- drivers/net/Kconfig | 62 - drivers/net/Makefile | 7 - drivers/net/ethernet/8390/Kconfig | 7 +- drivers/net/ethernet/Kconfig | 3 +- drivers/net/ethernet/Makefile | 1 + drivers/net/ethernet/natsemi/Kconfig | 82 + drivers/net/ethernet/natsemi/Makefile | 10 + drivers/net/ethernet/natsemi/ibmlana.c | 1075 ++++++++++ drivers/net/ethernet/natsemi/ibmlana.h | 278 +++ drivers/net/ethernet/natsemi/jazzsonic.c | 308 +++ drivers/net/ethernet/natsemi/macsonic.c | 666 ++++++ drivers/net/ethernet/natsemi/natsemi.c | 3370 ++++++++++++++++++++++++++++++ drivers/net/ethernet/natsemi/ns83820.c | 2312 ++++++++++++++++++++ drivers/net/ethernet/natsemi/sonic.c | 742 +++++++ drivers/net/ethernet/natsemi/sonic.h | 450 ++++ drivers/net/ethernet/natsemi/xtsonic.c | 333 +++ drivers/net/ibmlana.c | 1075 ---------- drivers/net/ibmlana.h | 278 --- drivers/net/jazzsonic.c | 308 --- drivers/net/macsonic.c | 666 ------ drivers/net/natsemi.c | 3370 ------------------------------ drivers/net/ns83820.c | 2312 -------------------- drivers/net/sonic.c | 742 ------- drivers/net/sonic.h | 450 ---- drivers/net/xtsonic.c | 333 --- 25 files changed, 9633 insertions(+), 9607 deletions(-) create mode 100644 drivers/net/ethernet/natsemi/Kconfig create mode 100644 drivers/net/ethernet/natsemi/Makefile create mode 100644 drivers/net/ethernet/natsemi/ibmlana.c create mode 100644 drivers/net/ethernet/natsemi/ibmlana.h create mode 100644 drivers/net/ethernet/natsemi/jazzsonic.c create mode 100644 drivers/net/ethernet/natsemi/macsonic.c create mode 100644 drivers/net/ethernet/natsemi/natsemi.c create mode 100644 drivers/net/ethernet/natsemi/ns83820.c create mode 100644 drivers/net/ethernet/natsemi/sonic.c create mode 100644 drivers/net/ethernet/natsemi/sonic.h create mode 100644 drivers/net/ethernet/natsemi/xtsonic.c delete mode 100644 drivers/net/ibmlana.c delete mode 100644 drivers/net/ibmlana.h delete mode 100644 drivers/net/jazzsonic.c delete mode 100644 drivers/net/macsonic.c delete mode 100644 drivers/net/natsemi.c delete mode 100644 drivers/net/ns83820.c delete mode 100644 drivers/net/sonic.c delete mode 100644 drivers/net/sonic.h delete mode 100644 drivers/net/xtsonic.c (limited to 'drivers/net') diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index d81f8f950124..8b1fae89898d 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -237,19 +237,6 @@ config MACB source "drivers/net/arm/Kconfig" -config MACSONIC - tristate "Macintosh SONIC based ethernet (onboard, NuBus, LC, CS)" - depends on MAC - ---help--- - Support for NatSemi SONIC based Ethernet devices. This includes - the onboard Ethernet in many Quadras as well as some LC-PDS, - a few Nubus and all known Comm Slot Ethernet cards. If you have - one of these say Y and read the Ethernet-HOWTO, available from - . - - To compile this driver as a module, choose M here. This module will - be called macsonic. - config KORINA tristate "Korina (IDT RC32434) Ethernet support" depends on NET_ETHERNET && MIKROTIK_RB532 @@ -257,19 +244,6 @@ config KORINA If you have a Mikrotik RouterBoard 500 or IDT RC32434 based system say Y. Otherwise say N. -config MIPS_JAZZ_SONIC - tristate "MIPS JAZZ onboard SONIC Ethernet support" - depends on MACH_JAZZ - help - This is the driver for the onboard card of MIPS Magnum 4000, - Acer PICA, Olivetti M700-10 and a few other identical OEM systems. - -config XTENSA_XT2000_SONIC - tristate "Xtensa XT2000 onboard SONIC Ethernet support" - depends on XTENSA_PLATFORM_XT2000 - help - This is the driver for the onboard card of the Xtensa XT2000 board. - config SGI_IOC3_ETH bool "SGI IOC3 Ethernet" depends on PCI && SGI_IP27 @@ -556,21 +530,6 @@ config SEEQ8005 To compile this driver as a module, choose M here. The module will be called seeq8005. -config IBMLANA - tristate "IBM LAN Adapter/A support" - depends on MCA - ---help--- - This is a Micro Channel Ethernet adapter. You need to set - CONFIG_MCA to use this driver. It is both available as an in-kernel - driver and as a module. - - To compile this driver as a module, choose M here. The only - currently supported card is the IBM LAN Adapter/A for Ethernet. It - will both support 16K and 32K memory windows, however a 32K window - gives a better security against packet losses. Usage of multiple - boards with this driver should be possible, but has not been tested - up to now due to lack of hardware. - config NET_PCI bool "EISA, VLB, PCI and on board controllers" depends on ISA || EISA || PCI @@ -635,17 +594,6 @@ config FEALNX Say Y here to support the Myson MTD-800 family of PCI-based Ethernet cards. -config NATSEMI - tristate "National Semiconductor DP8381x series PCI Ethernet support" - depends on NET_PCI && PCI - select CRC32 - help - This driver is for the National Semiconductor DP83810 series, - which is used in cards from PureData, NetGear, Linksys - and others, including the 83815 chip. - More specific information and updates are available from - . - config 8139CP tristate "RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support (EXPERIMENTAL)" depends on NET_PCI && PCI && EXPERIMENTAL @@ -1043,16 +991,6 @@ config IP1000 source "drivers/net/ixp2000/Kconfig" -config NS83820 - tristate "National Semiconductor DP83820 support" - depends on PCI - help - This is a driver for the National Semiconductor DP83820 series - of gigabit ethernet MACs. Cards using this chipset include - the D-Link DGE-500T, PureData's PDP8023Z-TG, SMC's SMC9462TX, - SOHO-GA2000T, SOHO-GA2500T. The driver supports the use of - zero copy. - config HAMACHI tristate "Packet Engines Hamachi GNIC-II support" depends on PCI diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 79f93f08c490..843edb3eded7 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -43,8 +43,6 @@ obj-$(CONFIG_SIS190) += sis190.o obj-$(CONFIG_SIS900) += sis900.o obj-$(CONFIG_R6040) += r6040.o obj-$(CONFIG_YELLOWFIN) += yellowfin.o -obj-$(CONFIG_NATSEMI) += natsemi.o -obj-$(CONFIG_NS83820) += ns83820.o obj-$(CONFIG_FEALNX) += fealnx.o spidernet-y += spider_net.o spider_net_ethtool.o obj-$(CONFIG_SPIDER_NET) += spidernet.o ethernet/sun/sungem_phy.o @@ -116,7 +114,6 @@ obj-$(CONFIG_DEFXX) += defxx.o obj-$(CONFIG_SGISEEQ) += sgiseeq.o obj-$(CONFIG_SGI_O2MACE_ETH) += meth.o obj-$(CONFIG_AT1700) += at1700.o -obj-$(CONFIG_IBMLANA) += ibmlana.o obj-$(CONFIG_8139CP) += 8139cp.o obj-$(CONFIG_8139TOO) += 8139too.o obj-$(CONFIG_CPMAC) += cpmac.o @@ -127,10 +124,8 @@ obj-$(CONFIG_SC92031) += sc92031.o obj-$(CONFIG_ETH16I) += eth16i.o obj-$(CONFIG_EQUALIZER) += eql.o obj-$(CONFIG_KORINA) += korina.o -obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o -obj-$(CONFIG_MACSONIC) += macsonic.o obj-$(CONFIG_TUN) += tun.o obj-$(CONFIG_VETH) += veth.o obj-$(CONFIG_NET_NETX) += netx-eth.o @@ -144,8 +139,6 @@ obj-$(CONFIG_ETHOC) += ethoc.o obj-$(CONFIG_GRETH) += greth.o obj-$(CONFIG_LANTIQ_ETOP) += lantiq_etop.o -obj-$(CONFIG_XTENSA_XT2000_SONIC) += xtsonic.o - obj-$(CONFIG_DNET) += dnet.o obj-$(CONFIG_MACB) += macb.o obj-$(CONFIG_S6GMAC) += s6gmac.o diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig index f1b9bddc1550..5d2169809b19 100644 --- a/drivers/net/ethernet/8390/Kconfig +++ b/drivers/net/ethernet/8390/Kconfig @@ -4,9 +4,10 @@ config NET_VENDOR_8390 bool "National Semi-conductor 8390 devices" - depends on AMIGA_PCMCIA || PCI || SUPERH || ISA || MCA || EISA || \ - MAC || M32R || MACH_TX49XX || MCA_LEGACY || H8300 || \ - ARM || MIPS || ZORRO || PCMCIA || EXPERIMENTAL + depends on NET_VENDOR_NATSEMI && (AMIGA_PCMCIA || PCI || SUPERH || \ + ISA || MCA || EISA || MAC || M32R || MACH_TX49XX || \ + MCA_LEGACY || H8300 || ARM || MIPS || ZORRO || PCMCIA || \ + EXPERIMENTAL) ---help--- If you have a network (Ethernet) card belonging to this class, say Y and read the Ethernet-HOWTO, available from diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig index c3c415d853b7..efc36651a2b9 100644 --- a/drivers/net/ethernet/Kconfig +++ b/drivers/net/ethernet/Kconfig @@ -12,7 +12,6 @@ menuconfig ETHERNET if ETHERNET source "drivers/net/ethernet/3com/Kconfig" -source "drivers/net/ethernet/8390/Kconfig" source "drivers/net/ethernet/amd/Kconfig" source "drivers/net/ethernet/apple/Kconfig" source "drivers/net/ethernet/broadcom/Kconfig" @@ -26,6 +25,8 @@ source "drivers/net/ethernet/intel/Kconfig" source "drivers/net/ethernet/i825xx/Kconfig" source "drivers/net/ethernet/mellanox/Kconfig" source "drivers/net/ethernet/myricom/Kconfig" +source "drivers/net/ethernet/natsemi/Kconfig" +source "drivers/net/ethernet/8390/Kconfig" source "drivers/net/ethernet/pasemi/Kconfig" source "drivers/net/ethernet/qlogic/Kconfig" source "drivers/net/ethernet/racal/Kconfig" diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile index b67b88d5afd9..668ca92b4863 100644 --- a/drivers/net/ethernet/Makefile +++ b/drivers/net/ethernet/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_NET_VENDOR_INTEL) += intel/ obj-$(CONFIG_NET_VENDOR_I825XX) += i825xx/ obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/ obj-$(CONFIG_NET_VENDOR_MYRI) += myricom/ +obj-$(CONFIG_NET_VENDOR_NATSEMI) += natsemi/ obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/ obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/ obj-$(CONFIG_NET_VENDOR_RACAL) += racal/ diff --git a/drivers/net/ethernet/natsemi/Kconfig b/drivers/net/ethernet/natsemi/Kconfig new file mode 100644 index 000000000000..1e5c1e1ec79a --- /dev/null +++ b/drivers/net/ethernet/natsemi/Kconfig @@ -0,0 +1,82 @@ +# +# National Semi-conductor device configuration +# + +config NET_VENDOR_NATSEMI + bool "National Semi-conductor devices" + depends on MCA || MAC || MACH_JAZZ || PCI || XTENSA_PLATFORM_XT2000 + ---help--- + If you have a network (Ethernet) card belonging to this class, say Y + and read the Ethernet-HOWTO, available from + . + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about National Semi-conductor devices. If you say Y, + you will be asked for your specific card in the following questions. + +if NET_VENDOR_NATSEMI + +config IBMLANA + tristate "IBM LAN Adapter/A support" + depends on MCA + ---help--- + This is a Micro Channel Ethernet adapter. You need to set + CONFIG_MCA to use this driver. It is both available as an in-kernel + driver and as a module. + + To compile this driver as a module, choose M here. The only + currently supported card is the IBM LAN Adapter/A for Ethernet. It + will both support 16K and 32K memory windows, however a 32K window + gives a better security against packet losses. Usage of multiple + boards with this driver should be possible, but has not been tested + up to now due to lack of hardware. + +config MACSONIC + tristate "Macintosh SONIC based ethernet (onboard, NuBus, LC, CS)" + depends on MAC + ---help--- + Support for NatSemi SONIC based Ethernet devices. This includes + the onboard Ethernet in many Quadras as well as some LC-PDS, + a few Nubus and all known Comm Slot Ethernet cards. If you have + one of these say Y and read the Ethernet-HOWTO, available from + . + + To compile this driver as a module, choose M here. This module will + be called macsonic. + +config MIPS_JAZZ_SONIC + tristate "MIPS JAZZ onboard SONIC Ethernet support" + depends on MACH_JAZZ + ---help--- + This is the driver for the onboard card of MIPS Magnum 4000, + Acer PICA, Olivetti M700-10 and a few other identical OEM systems. + +config NATSEMI + tristate "National Semiconductor DP8381x series PCI Ethernet support" + depends on PCI + select CRC32 + ---help--- + This driver is for the National Semiconductor DP83810 series, + which is used in cards from PureData, NetGear, Linksys + and others, including the 83815 chip. + More specific information and updates are available from + . + +config NS83820 + tristate "National Semiconductor DP83820 support" + depends on PCI + ---help--- + This is a driver for the National Semiconductor DP83820 series + of gigabit ethernet MACs. Cards using this chipset include + the D-Link DGE-500T, PureData's PDP8023Z-TG, SMC's SMC9462TX, + SOHO-GA2000T, SOHO-GA2500T. The driver supports the use of + zero copy. + +config XTENSA_XT2000_SONIC + tristate "Xtensa XT2000 onboard SONIC Ethernet support" + depends on XTENSA_PLATFORM_XT2000 + ---help--- + This is the driver for the onboard card of the Xtensa XT2000 board. + +endif # NET_VENDOR_NATSEMI diff --git a/drivers/net/ethernet/natsemi/Makefile b/drivers/net/ethernet/natsemi/Makefile new file mode 100644 index 000000000000..9aa5dea52b3e --- /dev/null +++ b/drivers/net/ethernet/natsemi/Makefile @@ -0,0 +1,10 @@ +# +# Makefile for the National Semi-conductor Sonic devices. +# + +obj-$(CONFIG_IBMLANA) += ibmlana.o +obj-$(CONFIG_MACSONIC) += macsonic.o +obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o +obj-$(CONFIG_NATSEMI) += natsemi.o +obj-$(CONFIG_NS83820) += ns83820.o +obj-$(CONFIG_XTENSA_XT2000_SONIC) += xtsonic.o diff --git a/drivers/net/ethernet/natsemi/ibmlana.c b/drivers/net/ethernet/natsemi/ibmlana.c new file mode 100644 index 000000000000..a7d6cad32953 --- /dev/null +++ b/drivers/net/ethernet/natsemi/ibmlana.c @@ -0,0 +1,1075 @@ +/* +net-3-driver for the IBM LAN Adapter/A + +This is an extension to the Linux operating system, and is covered by the +same GNU General Public License that covers that work. + +Copyright 1999 by Alfred Arnold (alfred@ccac.rwth-aachen.de, + alfred.arnold@lancom.de) + +This driver is based both on the SK_MCA driver, which is itself based on the +SK_G16 and 3C523 driver. + +paper sources: + 'PC Hardware: Aufbau, Funktionsweise, Programmierung' by + Hans-Peter Messmer for the basic Microchannel stuff + + 'Linux Geraetetreiber' by Allesandro Rubini, Kalle Dalheimer + for help on Ethernet driver programming + + 'DP83934CVUL-20/25 MHz SONIC-T Ethernet Controller Datasheet' by National + Semiconductor for info on the MAC chip + + 'LAN Technical Reference Ethernet Adapter Interface Version 1 Release 1.0 + Document Number SC30-3661-00' by IBM for info on the adapter itself + + Also see http://www.national.com/analog + +special acknowledgements to: + - Bob Eager for helping me out with documentation from IBM + - Jim Shorney for his endless patience with me while I was using + him as a beta tester to trace down the address filter bug ;-) + + Missing things: + + -> set debug level via ioctl instead of compile-time switches + -> I didn't follow the development of the 2.1.x kernels, so my + assumptions about which things changed with which kernel version + are probably nonsense + +History: + Nov 6th, 1999 + startup from SK_MCA driver + Dec 6th, 1999 + finally got docs about the card. A big thank you to Bob Eager! + Dec 12th, 1999 + first packet received + Dec 13th, 1999 + recv queue done, tcpdump works + Dec 15th, 1999 + transmission part works + Dec 28th, 1999 + added usage of the isa_functions for Linux 2.3 . Things should + still work with 2.0.x.... + Jan 28th, 2000 + in Linux 2.2.13, the version.h file mysteriously didn't get + included. Added a workaround for this. Furthermore, it now + not only compiles as a modules ;-) + Jan 30th, 2000 + newer kernels automatically probe more than one board, so the + 'startslot' as a variable is also needed here + Apr 12th, 2000 + the interrupt mask register is not set 'hard' instead of individually + setting registers, since this seems to set bits that shouldn't be + set + May 21st, 2000 + reset interrupt status immediately after CAM load + add a recovery delay after releasing the chip's reset line + May 24th, 2000 + finally found the bug in the address filter setup - damned signed + chars! + June 1st, 2000 + corrected version codes, added support for the latest 2.3 changes + Oct 28th, 2002 + cleaned up for the 2.5 tree + + *************************************************************************/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define _IBM_LANA_DRIVER_ +#include "ibmlana.h" + +#undef DEBUG + +#define DRV_NAME "ibmlana" + +/* ------------------------------------------------------------------------ + * global static data - not more since we can handle multiple boards and + * have to pack all state info into the device struct! + * ------------------------------------------------------------------------ */ + +static char *MediaNames[Media_Count] = { + "10BaseT", "10Base5", "Unknown", "10Base2" +}; + +/* ------------------------------------------------------------------------ + * private subfunctions + * ------------------------------------------------------------------------ */ + +#ifdef DEBUG + /* dump all registers */ + +static void dumpregs(struct net_device *dev) +{ + int z; + + for (z = 0; z < 160; z += 2) { + if (!(z & 15)) + printk("REGS: %04x:", z); + printk(" %04x", inw(dev->base_addr + z)); + if ((z & 15) == 14) + printk("\n"); + } +} + +/* dump parts of shared memory - only needed during debugging */ + +static void dumpmem(struct net_device *dev, u32 start, u32 len) +{ + ibmlana_priv *priv = netdev_priv(dev); + int z; + + printk("Address %04x:\n", start); + for (z = 0; z < len; z++) { + if ((z & 15) == 0) + printk("%04x:", z); + printk(" %02x", readb(priv->base + start + z)); + if ((z & 15) == 15) + printk("\n"); + } + if ((z & 15) != 0) + printk("\n"); +} + +/* print exact time - ditto */ + +static void PrTime(void) +{ + struct timeval tv; + + do_gettimeofday(&tv); + printk("%9d:%06d: ", (int) tv.tv_sec, (int) tv.tv_usec); +} +#endif /* DEBUG */ + +/* deduce resources out of POS registers */ + +static void getaddrs(struct mca_device *mdev, int *base, int *memlen, + int *iobase, int *irq, ibmlana_medium *medium) +{ + u_char pos0, pos1; + + pos0 = mca_device_read_stored_pos(mdev, 2); + pos1 = mca_device_read_stored_pos(mdev, 3); + + *base = 0xc0000 + ((pos1 & 0xf0) << 9); + *memlen = (pos1 & 0x01) ? 0x8000 : 0x4000; + *iobase = (pos0 & 0xe0) << 7; + switch (pos0 & 0x06) { + case 0: + *irq = 5; + break; + case 2: + *irq = 15; + break; + case 4: + *irq = 10; + break; + case 6: + *irq = 11; + break; + } + *medium = (pos0 & 0x18) >> 3; +} + +/* wait on register value with mask and timeout */ + +static int wait_timeout(struct net_device *dev, int regoffs, u16 mask, + u16 value, int timeout) +{ + unsigned long fin = jiffies + timeout; + + while (time_before(jiffies,fin)) + if ((inw(dev->base_addr + regoffs) & mask) == value) + return 1; + + return 0; +} + + +/* reset the whole board */ + +static void ResetBoard(struct net_device *dev) +{ + unsigned char bcmval; + + /* read original board control value */ + + bcmval = inb(dev->base_addr + BCMREG); + + /* set reset bit for a while */ + + bcmval |= BCMREG_RESET; + outb(bcmval, dev->base_addr + BCMREG); + udelay(10); + bcmval &= ~BCMREG_RESET; + outb(bcmval, dev->base_addr + BCMREG); + + /* switch over to RAM again */ + + bcmval |= BCMREG_RAMEN | BCMREG_RAMWIN; + outb(bcmval, dev->base_addr + BCMREG); +} + +/* calculate RAM layout & set up descriptors in RAM */ + +static void InitDscrs(struct net_device *dev) +{ + ibmlana_priv *priv = netdev_priv(dev); + u32 addr, baddr, raddr; + int z; + tda_t tda; + rda_t rda; + rra_t rra; + + /* initialize RAM */ + + memset_io(priv->base, 0xaa, + dev->mem_start - dev->mem_start); /* XXX: typo? */ + + /* setup n TX descriptors - independent of RAM size */ + + priv->tdastart = addr = 0; + priv->txbufstart = baddr = sizeof(tda_t) * TXBUFCNT; + for (z = 0; z < TXBUFCNT; z++) { + tda.status = 0; + tda.config = 0; + tda.length = 0; + tda.fragcount = 1; + tda.startlo = baddr; + tda.starthi = 0; + tda.fraglength = 0; + if (z == TXBUFCNT - 1) + tda.link = priv->tdastart; + else + tda.link = addr + sizeof(tda_t); + tda.link |= 1; + memcpy_toio(priv->base + addr, &tda, sizeof(tda_t)); + addr += sizeof(tda_t); + baddr += PKTSIZE; + } + + /* calculate how many receive buffers fit into remaining memory */ + + priv->rxbufcnt = (dev->mem_end - dev->mem_start - baddr) / (sizeof(rra_t) + sizeof(rda_t) + PKTSIZE); + + /* calculate receive addresses */ + + priv->rrastart = raddr = priv->txbufstart + (TXBUFCNT * PKTSIZE); + priv->rdastart = addr = priv->rrastart + (priv->rxbufcnt * sizeof(rra_t)); + priv->rxbufstart = baddr = priv->rdastart + (priv->rxbufcnt * sizeof(rda_t)); + + for (z = 0; z < priv->rxbufcnt; z++) { + rra.startlo = baddr; + rra.starthi = 0; + rra.cntlo = PKTSIZE >> 1; + rra.cnthi = 0; + memcpy_toio(priv->base + raddr, &rra, sizeof(rra_t)); + + rda.status = 0; + rda.length = 0; + rda.startlo = 0; + rda.starthi = 0; + rda.seqno = 0; + if (z < priv->rxbufcnt - 1) + rda.link = addr + sizeof(rda_t); + else + rda.link = 1; + rda.inuse = 1; + memcpy_toio(priv->base + addr, &rda, sizeof(rda_t)); + + baddr += PKTSIZE; + raddr += sizeof(rra_t); + addr += sizeof(rda_t); + } + + /* initialize current pointers */ + + priv->nextrxdescr = 0; + priv->lastrxdescr = priv->rxbufcnt - 1; + priv->nexttxdescr = 0; + priv->currtxdescr = 0; + priv->txusedcnt = 0; + memset(priv->txused, 0, sizeof(priv->txused)); +} + +/* set up Rx + Tx descriptors in SONIC */ + +static int InitSONIC(struct net_device *dev) +{ + ibmlana_priv *priv = netdev_priv(dev); + + /* set up start & end of resource area */ + + outw(0, SONIC_URRA); + outw(priv->rrastart, dev->base_addr + SONIC_RSA); + outw(priv->rrastart + (priv->rxbufcnt * sizeof(rra_t)), dev->base_addr + SONIC_REA); + outw(priv->rrastart, dev->base_addr + SONIC_RRP); + outw(priv->rrastart, dev->base_addr + SONIC_RWP); + + /* set EOBC so that only one packet goes into one buffer */ + + outw((PKTSIZE - 4) >> 1, dev->base_addr + SONIC_EOBC); + + /* let SONIC read the first RRA descriptor */ + + outw(CMDREG_RRRA, dev->base_addr + SONIC_CMDREG); + if (!wait_timeout(dev, SONIC_CMDREG, CMDREG_RRRA, 0, 2)) { + printk(KERN_ERR "%s: SONIC did not respond on RRRA command - giving up.", dev->name); + return 0; + } + + /* point SONIC to the first RDA */ + + outw(0, dev->base_addr + SONIC_URDA); + outw(priv->rdastart, dev->base_addr + SONIC_CRDA); + + /* set upper half of TDA address */ + + outw(0, dev->base_addr + SONIC_UTDA); + + return 1; +} + +/* stop SONIC so we can reinitialize it */ + +static void StopSONIC(struct net_device *dev) +{ + /* disable interrupts */ + + outb(inb(dev->base_addr + BCMREG) & (~BCMREG_IEN), dev->base_addr + BCMREG); + outb(0, dev->base_addr + SONIC_IMREG); + + /* reset the SONIC */ + + outw(CMDREG_RST, dev->base_addr + SONIC_CMDREG); + udelay(10); + outw(CMDREG_RST, dev->base_addr + SONIC_CMDREG); +} + +/* initialize card and SONIC for proper operation */ + +static void putcam(camentry_t * cams, int *camcnt, char *addr) +{ + camentry_t *pcam = cams + (*camcnt); + u8 *uaddr = (u8 *) addr; + + pcam->index = *camcnt; + pcam->addr0 = (((u16) uaddr[1]) << 8) | uaddr[0]; + pcam->addr1 = (((u16) uaddr[3]) << 8) | uaddr[2]; + pcam->addr2 = (((u16) uaddr[5]) << 8) | uaddr[4]; + (*camcnt)++; +} + +static void InitBoard(struct net_device *dev) +{ + ibmlana_priv *priv = netdev_priv(dev); + int camcnt; + camentry_t cams[16]; + u32 cammask; + struct netdev_hw_addr *ha; + u16 rcrval; + + /* reset the SONIC */ + + outw(CMDREG_RST, dev->base_addr + SONIC_CMDREG); + udelay(10); + + /* clear all spurious interrupts */ + + outw(inw(dev->base_addr + SONIC_ISREG), dev->base_addr + SONIC_ISREG); + + /* set up the SONIC's bus interface - constant for this adapter - + must be done while the SONIC is in reset */ + + outw(DCREG_USR1 | DCREG_USR0 | DCREG_WC1 | DCREG_DW32, dev->base_addr + SONIC_DCREG); + outw(0, dev->base_addr + SONIC_DCREG2); + + /* remove reset form the SONIC */ + + outw(0, dev->base_addr + SONIC_CMDREG); + udelay(10); + + /* data sheet requires URRA to be programmed before setting up the CAM contents */ + + outw(0, dev->base_addr + SONIC_URRA); + + /* program the CAM entry 0 to the device address */ + + camcnt = 0; + putcam(cams, &camcnt, dev->dev_addr); + + /* start putting the multicast addresses into the CAM list. Stop if + it is full. */ + + netdev_for_each_mc_addr(ha, dev) { + putcam(cams, &camcnt, ha->addr); + if (camcnt == 16) + break; + } + + /* calculate CAM mask */ + + cammask = (1 << camcnt) - 1; + + /* feed CDA into SONIC, initialize RCR value (always get broadcasts) */ + + memcpy_toio(priv->base, cams, sizeof(camentry_t) * camcnt); + memcpy_toio(priv->base + (sizeof(camentry_t) * camcnt), &cammask, sizeof(cammask)); + +#ifdef DEBUG + printk("CAM setup:\n"); + dumpmem(dev, 0, sizeof(camentry_t) * camcnt + sizeof(cammask)); +#endif + + outw(0, dev->base_addr + SONIC_CAMPTR); + outw(camcnt, dev->base_addr + SONIC_CAMCNT); + outw(CMDREG_LCAM, dev->base_addr + SONIC_CMDREG); + if (!wait_timeout(dev, SONIC_CMDREG, CMDREG_LCAM, 0, 2)) { + printk(KERN_ERR "%s:SONIC did not respond on LCAM command - giving up.", dev->name); + return; + } else { + /* clear interrupt condition */ + + outw(ISREG_LCD, dev->base_addr + SONIC_ISREG); + +#ifdef DEBUG + printk("Loading CAM done, address pointers %04x:%04x\n", + inw(dev->base_addr + SONIC_URRA), + inw(dev->base_addr + SONIC_CAMPTR)); + { + int z; + + printk("\n-->CAM: PTR %04x CNT %04x\n", + inw(dev->base_addr + SONIC_CAMPTR), + inw(dev->base_addr + SONIC_CAMCNT)); + outw(CMDREG_RST, dev->base_addr + SONIC_CMDREG); + for (z = 0; z < camcnt; z++) { + outw(z, dev->base_addr + SONIC_CAMEPTR); + printk("Entry %d: %04x %04x %04x\n", z, + inw(dev->base_addr + SONIC_CAMADDR0), + inw(dev->base_addr + SONIC_CAMADDR1), + inw(dev->base_addr + SONIC_CAMADDR2)); + } + outw(0, dev->base_addr + SONIC_CMDREG); + } +#endif + } + + rcrval = RCREG_BRD | RCREG_LB_NONE; + + /* if still multicast addresses left or ALLMULTI is set, set the multicast + enable bit */ + + if ((dev->flags & IFF_ALLMULTI) || netdev_mc_count(dev) > camcnt) + rcrval |= RCREG_AMC; + + /* promiscuous mode ? */ + + if (dev->flags & IFF_PROMISC) + rcrval |= RCREG_PRO; + + /* program receive mode */ + + outw(rcrval, dev->base_addr + SONIC_RCREG); +#ifdef DEBUG + printk("\nRCRVAL: %04x\n", rcrval); +#endif + + /* set up descriptors in shared memory + feed them into SONIC registers */ + + InitDscrs(dev); + if (!InitSONIC(dev)) + return; + + /* reset all pending interrupts */ + + outw(0xffff, dev->base_addr + SONIC_ISREG); + + /* enable transmitter + receiver interrupts */ + + outw(CMDREG_RXEN, dev->base_addr + SONIC_CMDREG); + outw(IMREG_PRXEN | IMREG_RBEEN | IMREG_PTXEN | IMREG_TXEREN, dev->base_addr + SONIC_IMREG); + + /* turn on card interrupts */ + + outb(inb(dev->base_addr + BCMREG) | BCMREG_IEN, dev->base_addr + BCMREG); + +#ifdef DEBUG + printk("Register dump after initialization:\n"); + dumpregs(dev); +#endif +} + +/* start transmission of a descriptor */ + +static void StartTx(struct net_device *dev, int descr) +{ + ibmlana_priv *priv = netdev_priv(dev); + int addr; + + addr = priv->tdastart + (descr * sizeof(tda_t)); + + /* put descriptor address into SONIC */ + + outw(addr, dev->base_addr + SONIC_CTDA); + + /* trigger transmitter */ + + priv->currtxdescr = descr; + outw(CMDREG_TXP, dev->base_addr + SONIC_CMDREG); +} + +/* ------------------------------------------------------------------------ + * interrupt handler(s) + * ------------------------------------------------------------------------ */ + +/* receive buffer area exhausted */ + +static void irqrbe_handler(struct net_device *dev) +{ + ibmlana_priv *priv = netdev_priv(dev); + + /* point the SONIC back to the RRA start */ + + outw(priv->rrastart, dev->base_addr + SONIC_RRP); + outw(priv->rrastart, dev->base_addr + SONIC_RWP); +} + +/* receive interrupt */ + +static void irqrx_handler(struct net_device *dev) +{ + ibmlana_priv *priv = netdev_priv(dev); + rda_t rda; + u32 rdaaddr, lrdaaddr; + + /* loop until ... */ + + while (1) { + /* read descriptor that was next to be filled by SONIC */ + + rdaaddr = priv->rdastart + (priv->nextrxdescr * sizeof(rda_t)); + lrdaaddr = priv->rdastart + (priv->lastrxdescr * sizeof(rda_t)); + memcpy_fromio(&rda, priv->base + rdaaddr, sizeof(rda_t)); + + /* iron out upper word halves of fields we use - SONIC will duplicate + bits 0..15 to 16..31 */ + + rda.status &= 0xffff; + rda.length &= 0xffff; + rda.startlo &= 0xffff; + + /* stop if the SONIC still owns it, i.e. there is no data for us */ + + if (rda.inuse) + break; + + /* good packet? */ + + else if (rda.status & RCREG_PRX) { + struct sk_buff *skb; + + /* fetch buffer */ + + skb = dev_alloc_skb(rda.length + 2); + if (skb == NULL) + dev->stats.rx_dropped++; + else { + /* copy out data */ + + memcpy_fromio(skb_put(skb, rda.length), + priv->base + + rda.startlo, rda.length); + + /* set up skb fields */ + + skb->protocol = eth_type_trans(skb, dev); + skb_checksum_none_assert(skb); + + /* bookkeeping */ + dev->stats.rx_packets++; + dev->stats.rx_bytes += rda.length; + + /* pass to the upper layers */ + netif_rx(skb); + } + } + + /* otherwise check error status bits and increase statistics */ + + else { + dev->stats.rx_errors++; + if (rda.status & RCREG_FAER) + dev->stats.rx_frame_errors++; + if (rda.status & RCREG_CRCR) + dev->stats.rx_crc_errors++; + } + + /* descriptor processed, will become new last descriptor in queue */ + + rda.link = 1; + rda.inuse = 1; + memcpy_toio(priv->base + rdaaddr, &rda, + sizeof(rda_t)); + + /* set up link and EOL = 0 in currently last descriptor. Only write + the link field since the SONIC may currently already access the + other fields. */ + + memcpy_toio(priv->base + lrdaaddr + 20, &rdaaddr, 4); + + /* advance indices */ + + priv->lastrxdescr = priv->nextrxdescr; + if ((++priv->nextrxdescr) >= priv->rxbufcnt) + priv->nextrxdescr = 0; + } +} + +/* transmit interrupt */ + +static void irqtx_handler(struct net_device *dev) +{ + ibmlana_priv *priv = netdev_priv(dev); + tda_t tda; + + /* fetch descriptor (we forgot the size ;-) */ + memcpy_fromio(&tda, priv->base + priv->tdastart + (priv->currtxdescr * sizeof(tda_t)), sizeof(tda_t)); + + /* update statistics */ + dev->stats.tx_packets++; + dev->stats.tx_bytes += tda.length; + + /* update our pointers */ + priv->txused[priv->currtxdescr] = 0; + priv->txusedcnt--; + + /* if there are more descriptors present in RAM, start them */ + if (priv->txusedcnt > 0) + StartTx(dev, (priv->currtxdescr + 1) % TXBUFCNT); + + /* tell the upper layer we can go on transmitting */ + netif_wake_queue(dev); +} + +static void irqtxerr_handler(struct net_device *dev) +{ + ibmlana_priv *priv = netdev_priv(dev); + tda_t tda; + + /* fetch descriptor to check status */ + memcpy_fromio(&tda, priv->base + priv->tdastart + (priv->currtxdescr * sizeof(tda_t)), sizeof(tda_t)); + + /* update statistics */ + dev->stats.tx_errors++; + if (tda.status & (TCREG_NCRS | TCREG_CRSL)) + dev->stats.tx_carrier_errors++; + if (tda.status & TCREG_EXC) + dev->stats.tx_aborted_errors++; + if (tda.status & TCREG_OWC) + dev->stats.tx_window_errors++; + if (tda.status & TCREG_FU) + dev->stats.tx_fifo_errors++; + + /* update our pointers */ + priv->txused[priv->currtxdescr] = 0; + priv->txusedcnt--; + + /* if there are more descriptors present in RAM, start them */ + if (priv->txusedcnt > 0) + StartTx(dev, (priv->currtxdescr + 1) % TXBUFCNT); + + /* tell the upper layer we can go on transmitting */ + netif_wake_queue(dev); +} + +/* general interrupt entry */ + +static irqreturn_t irq_handler(int dummy, void *device) +{ + struct net_device *dev = device; + u16 ival; + + /* in case we're not meant... */ + if (!(inb(dev->base_addr + BCMREG) & BCMREG_IPEND)) + return IRQ_NONE; + + /* loop through the interrupt bits until everything is clear */ + while (1) { + ival = inw(dev->base_addr + SONIC_ISREG); + + if (ival & ISREG_RBE) { + irqrbe_handler(dev); + outw(ISREG_RBE, dev->base_addr + SONIC_ISREG); + } + if (ival & ISREG_PKTRX) { + irqrx_handler(dev); + outw(ISREG_PKTRX, dev->base_addr + SONIC_ISREG); + } + if (ival & ISREG_TXDN) { + irqtx_handler(dev); + outw(ISREG_TXDN, dev->base_addr + SONIC_ISREG); + } + if (ival & ISREG_TXER) { + irqtxerr_handler(dev); + outw(ISREG_TXER, dev->base_addr + SONIC_ISREG); + } + break; + } + return IRQ_HANDLED; +} + +/* ------------------------------------------------------------------------ + * driver methods + * ------------------------------------------------------------------------ */ + +/* MCA info */ + +#if 0 /* info available elsewhere, but this is kept for reference */ +static int ibmlana_getinfo(char *buf, int slot, void *d) +{ + int len = 0, i; + struct net_device *dev = (struct net_device *) d; + ibmlana_priv *priv; + + /* can't say anything about an uninitialized device... */ + + if (dev == NULL) + return len; + priv = netdev_priv(dev); + + /* print info */ + + len += sprintf(buf + len, "IRQ: %d\n", priv->realirq); + len += sprintf(buf + len, "I/O: %#lx\n", dev->base_addr); + len += sprintf(buf + len, "Memory: %#lx-%#lx\n", dev->mem_start, dev->mem_end - 1); + len += sprintf(buf + len, "Transceiver: %s\n", MediaNames[priv->medium]); + len += sprintf(buf + len, "Device: %s\n", dev->name); + len += sprintf(buf + len, "MAC address:"); + for (i = 0; i < 6; i++) + len += sprintf(buf + len, " %02x", dev->dev_addr[i]); + buf[len++] = '\n'; + buf[len] = 0; + + return len; +} +#endif + +/* open driver. Means also initialization and start of LANCE */ + +static int ibmlana_open(struct net_device *dev) +{ + int result; + ibmlana_priv *priv = netdev_priv(dev); + + /* register resources - only necessary for IRQ */ + + result = request_irq(priv->realirq, irq_handler, IRQF_SHARED, + dev->name, dev); + if (result != 0) { + printk(KERN_ERR "%s: failed to register irq %d\n", dev->name, dev->irq); + return result; + } + dev->irq = priv->realirq; + + /* set up the card and SONIC */ + InitBoard(dev); + + /* initialize operational flags */ + netif_start_queue(dev); + return 0; +} + +/* close driver. Shut down board and free allocated resources */ + +static int ibmlana_close(struct net_device *dev) +{ + /* turn off board */ + + /* release resources */ + if (dev->irq != 0) + free_irq(dev->irq, dev); + dev->irq = 0; + return 0; +} + +/* transmit a block. */ + +static netdev_tx_t ibmlana_tx(struct sk_buff *skb, struct net_device *dev) +{ + ibmlana_priv *priv = netdev_priv(dev); + int tmplen, addr; + unsigned long flags; + tda_t tda; + int baddr; + + /* find out if there are free slots for a frame to transmit. If not, + the upper layer is in deep desperation and we simply ignore the frame. */ + + if (priv->txusedcnt >= TXBUFCNT) { + dev->stats.tx_dropped++; + goto tx_done; + } + + /* copy the frame data into the next free transmit buffer - fillup missing */ + tmplen = skb->len; + if (tmplen < 60) + tmplen = 60; + baddr = priv->txbufstart + (priv->nexttxdescr * PKTSIZE); + memcpy_toio(priv->base + baddr, skb->data, skb->len); + + /* copy filler into RAM - in case we're filling up... + we're filling a bit more than necessary, but that doesn't harm + since the buffer is far larger... + Sorry Linus for the filler string but I couldn't resist ;-) */ + + if (tmplen > skb->len) { + char *fill = "NetBSD is a nice OS too! "; + unsigned int destoffs = skb->len, l = strlen(fill); + + while (destoffs < tmplen) { + memcpy_toio(priv->base + baddr + destoffs, fill, l); + destoffs += l; + } + } + + /* set up the new frame descriptor */ + addr = priv->tdastart + (priv->nexttxdescr * sizeof(tda_t)); + memcpy_fromio(&tda, priv->base + addr, sizeof(tda_t)); + tda.length = tda.fraglength = tmplen; + memcpy_toio(priv->base + addr, &tda, sizeof(tda_t)); + + /* if there were no active descriptors, trigger the SONIC */ + spin_lock_irqsave(&priv->lock, flags); + + priv->txusedcnt++; + priv->txused[priv->nexttxdescr] = 1; + + /* are all transmission slots used up ? */ + if (priv->txusedcnt >= TXBUFCNT) + netif_stop_queue(dev); + + if (priv->txusedcnt == 1) + StartTx(dev, priv->nexttxdescr); + priv->nexttxdescr = (priv->nexttxdescr + 1) % TXBUFCNT; + + spin_unlock_irqrestore(&priv->lock, flags); +tx_done: + dev_kfree_skb(skb); + return NETDEV_TX_OK; +} + +/* switch receiver mode. */ + +static void ibmlana_set_multicast_list(struct net_device *dev) +{ + /* first stop the SONIC... */ + StopSONIC(dev); + /* ...then reinit it with the new flags */ + InitBoard(dev); +} + +/* ------------------------------------------------------------------------ + * hardware check + * ------------------------------------------------------------------------ */ + +static int ibmlana_irq; +static int ibmlana_io; +static int startslot; /* counts through slots when probing multiple devices */ + +static short ibmlana_adapter_ids[] __initdata = { + IBM_LANA_ID, + 0x0000 +}; + +static char *ibmlana_adapter_names[] __devinitdata = { + "IBM LAN Adapter/A", + NULL +}; + + +static const struct net_device_ops ibmlana_netdev_ops = { + .ndo_open = ibmlana_open, + .ndo_stop = ibmlana_close, + .ndo_start_xmit = ibmlana_tx, + .ndo_set_multicast_list = ibmlana_set_multicast_list, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +}; + +static int __devinit ibmlana_init_one(struct device *kdev) +{ + struct mca_device *mdev = to_mca_device(kdev); + struct net_device *dev; + int slot = mdev->slot, z, rc; + int base = 0, irq = 0, iobase = 0, memlen = 0; + ibmlana_priv *priv; + ibmlana_medium medium; + + dev = alloc_etherdev(sizeof(ibmlana_priv)); + if (!dev) + return -ENOMEM; + + dev->irq = ibmlana_irq; + dev->base_addr = ibmlana_io; + + base = dev->mem_start; + irq = dev->irq; + + /* deduce card addresses */ + getaddrs(mdev, &base, &memlen, &iobase, &irq, &medium); + + /* were we looking for something different ? */ + if (dev->irq && dev->irq != irq) { + rc = -ENODEV; + goto err_out; + } + if (dev->mem_start && dev->mem_start != base) { + rc = -ENODEV; + goto err_out; + } + + /* announce success */ + printk(KERN_INFO "%s: IBM LAN Adapter/A found in slot %d\n", dev->name, slot + 1); + + /* try to obtain I/O range */ + if (!request_region(iobase, IBM_LANA_IORANGE, DRV_NAME)) { + printk(KERN_ERR "%s: cannot allocate I/O range at %#x!\n", DRV_NAME, iobase); + startslot = slot + 1; + rc = -EBUSY; + goto err_out; + } + + priv = netdev_priv(dev); + priv->slot = slot; + priv->realirq = mca_device_transform_irq(mdev, irq); + priv->medium = medium; + spin_lock_init(&priv->lock); + + /* set base + irq for this device (irq not allocated so far) */ + + dev->irq = 0; + dev->mem_start = base; + dev->mem_end = base + memlen; + dev->base_addr = iobase; + + priv->base = ioremap(base, memlen); + if (!priv->base) { + printk(KERN_ERR "%s: cannot remap memory!\n", DRV_NAME); + startslot = slot + 1; + rc = -EBUSY; + goto err_out_reg; + } + + mca_device_set_name(mdev, ibmlana_adapter_names[mdev->index]); + mca_device_set_claim(mdev, 1); + + /* set methods */ + dev->netdev_ops = &ibmlana_netdev_ops; + dev->flags |= IFF_MULTICAST; + + /* copy out MAC address */ + + for (z = 0; z < ETH_ALEN; z++) + dev->dev_addr[z] = inb(dev->base_addr + MACADDRPROM + z); + + /* print config */ + + printk(KERN_INFO "%s: IRQ %d, I/O %#lx, memory %#lx-%#lx, " + "MAC address %pM.\n", + dev->name, priv->realirq, dev->base_addr, + dev->mem_start, dev->mem_end - 1, + dev->dev_addr); + printk(KERN_INFO "%s: %s medium\n", dev->name, MediaNames[priv->medium]); + + /* reset board */ + + ResetBoard(dev); + + /* next probe will start at next slot */ + + startslot = slot + 1; + + rc = register_netdev(dev); + if (rc) + goto err_out_claimed; + + dev_set_drvdata(kdev, dev); + return 0; + +err_out_claimed: + mca_device_set_claim(mdev, 0); + iounmap(priv->base); +err_out_reg: + release_region(iobase, IBM_LANA_IORANGE); +err_out: + free_netdev(dev); + return rc; +} + +static int ibmlana_remove_one(struct device *kdev) +{ + struct mca_device *mdev = to_mca_device(kdev); + struct net_device *dev = dev_get_drvdata(kdev); + ibmlana_priv *priv = netdev_priv(dev); + + unregister_netdev(dev); + /*DeinitBoard(dev); */ + release_region(dev->base_addr, IBM_LANA_IORANGE); + mca_device_set_claim(mdev, 0); + iounmap(priv->base); + free_netdev(dev); + return 0; +} + +/* ------------------------------------------------------------------------ + * modularization support + * ------------------------------------------------------------------------ */ + +module_param_named(irq, ibmlana_irq, int, 0); +module_param_named(io, ibmlana_io, int, 0); +MODULE_PARM_DESC(irq, "IBM LAN/A IRQ number"); +MODULE_PARM_DESC(io, "IBM LAN/A I/O base address"); +MODULE_LICENSE("GPL"); + +static struct mca_driver ibmlana_driver = { + .id_table = ibmlana_adapter_ids, + .driver = { + .name = "ibmlana", + .bus = &mca_bus_type, + .probe = ibmlana_init_one, + .remove = ibmlana_remove_one, + }, +}; + +static int __init ibmlana_init_module(void) +{ + return mca_register_driver(&ibmlana_driver); +} + +static void __exit ibmlana_cleanup_module(void) +{ + mca_unregister_driver(&ibmlana_driver); +} + +module_init(ibmlana_init_module); +module_exit(ibmlana_cleanup_module); diff --git a/drivers/net/ethernet/natsemi/ibmlana.h b/drivers/net/ethernet/natsemi/ibmlana.h new file mode 100644 index 000000000000..accd5efc9c8a --- /dev/null +++ b/drivers/net/ethernet/natsemi/ibmlana.h @@ -0,0 +1,278 @@ +#ifndef _IBM_LANA_INCLUDE_ +#define _IBM_LANA_INCLUDE_ + +#ifdef _IBM_LANA_DRIVER_ + +/* maximum packet size */ + +#define PKTSIZE 1524 + +/* number of transmit buffers */ + +#define TXBUFCNT 4 + +/* Adapter ID's */ +#define IBM_LANA_ID 0xffe0 + +/* media enumeration - defined in a way that it fits onto the LAN/A's + POS registers... */ + +typedef enum { + Media_10BaseT, Media_10Base5, + Media_Unknown, Media_10Base2, Media_Count +} ibmlana_medium; + +/* private structure */ + +typedef struct { + unsigned int slot; /* MCA-Slot-# */ + int realirq; /* memorizes actual IRQ, even when + currently not allocated */ + ibmlana_medium medium; /* physical cannector */ + u32 tdastart, txbufstart, /* addresses */ + rrastart, rxbufstart, rdastart, rxbufcnt, txusedcnt; + int nextrxdescr, /* next rx descriptor to be used */ + lastrxdescr, /* last free rx descriptor */ + nexttxdescr, /* last tx descriptor to be used */ + currtxdescr, /* tx descriptor currently tx'ed */ + txused[TXBUFCNT]; /* busy flags */ + void __iomem *base; + spinlock_t lock; +} ibmlana_priv; + +/* this card uses quite a lot of I/O ports...luckily the MCA bus decodes + a full 64K I/O range... */ + +#define IBM_LANA_IORANGE 0xa0 + +/* Command Register: */ + +#define SONIC_CMDREG 0x00 +#define CMDREG_HTX 0x0001 /* halt transmission */ +#define CMDREG_TXP 0x0002 /* start transmission */ +#define CMDREG_RXDIS 0x0004 /* disable receiver */ +#define CMDREG_RXEN 0x0008 /* enable receiver */ +#define CMDREG_STP 0x0010 /* stop timer */ +#define CMDREG_ST 0x0020 /* start timer */ +#define CMDREG_RST 0x0080 /* software reset */ +#define CMDREG_RRRA 0x0100 /* force SONIC to read first RRA */ +#define CMDREG_LCAM 0x0200 /* force SONIC to read CAM descrs */ + +/* Data Configuration Register */ + +#define SONIC_DCREG 0x02 +#define DCREG_EXBUS 0x8000 /* Extended Bus Mode */ +#define DCREG_LBR 0x2000 /* Latched Bus Retry */ +#define DCREG_PO1 0x1000 /* Programmable Outputs */ +#define DCREG_PO0 0x0800 +#define DCREG_SBUS 0x0400 /* Synchronous Bus Mode */ +#define DCREG_USR1 0x0200 /* User Definable Pins */ +#define DCREG_USR0 0x0100 +#define DCREG_WC0 0x0000 /* 0..3 Wait States */ +#define DCREG_WC1 0x0040 +#define DCREG_WC2 0x0080 +#define DCREG_WC3 0x00c0 +#define DCREG_DW16 0x0000 /* 16 bit Bus Mode */ +#define DCREG_DW32 0x0020 /* 32 bit Bus Mode */ +#define DCREG_BMS 0x0010 /* Block Mode Select */ +#define DCREG_RFT4 0x0000 /* 4/8/16/24 bytes RX Threshold */ +#define DCREG_RFT8 0x0004 +#define DCREG_RFT16 0x0008 +#define DCREG_RFT24 0x000c +#define DCREG_TFT8 0x0000 /* 8/16/24/28 bytes TX Threshold */ +#define DCREG_TFT16 0x0001 +#define DCREG_TFT24 0x0002 +#define DCREG_TFT28 0x0003 + +/* Receive Control Register */ + +#define SONIC_RCREG 0x04 +#define RCREG_ERR 0x8000 /* accept damaged and collided pkts */ +#define RCREG_RNT 0x4000 /* accept packets that are < 64 */ +#define RCREG_BRD 0x2000 /* accept broadcasts */ +#define RCREG_PRO 0x1000 /* promiscuous mode */ +#define RCREG_AMC 0x0800 /* accept all multicasts */ +#define RCREG_LB_NONE 0x0000 /* no loopback */ +#define RCREG_LB_MAC 0x0200 /* MAC loopback */ +#define RCREG_LB_ENDEC 0x0400 /* ENDEC loopback */ +#define RCREG_LB_XVR 0x0600 /* Transceiver loopback */ +#define RCREG_MC 0x0100 /* Multicast received */ +#define RCREG_BC 0x0080 /* Broadcast received */ +#define RCREG_LPKT 0x0040 /* last packet in RBA */ +#define RCREG_CRS 0x0020 /* carrier sense present */ +#define RCREG_COL 0x0010 /* recv'd packet with collision */ +#define RCREG_CRCR 0x0008 /* recv'd packet with CRC error */ +#define RCREG_FAER 0x0004 /* recv'd packet with inv. framing */ +#define RCREG_LBK 0x0002 /* recv'd loopback packet */ +#define RCREG_PRX 0x0001 /* recv'd packet is OK */ + +/* Transmit Control Register */ + +#define SONIC_TCREG 0x06 +#define TCREG_PINT 0x8000 /* generate interrupt after TDA read */ +#define TCREG_POWC 0x4000 /* timer start out of window detect */ +#define TCREG_CRCI 0x2000 /* inhibit CRC generation */ +#define TCREG_EXDIS 0x1000 /* disable excessive deferral timer */ +#define TCREG_EXD 0x0400 /* excessive deferral occurred */ +#define TCREG_DEF 0x0200 /* single deferral occurred */ +#define TCREG_NCRS 0x0100 /* no carrier detected */ +#define TCREG_CRSL 0x0080 /* carrier lost */ +#define TCREG_EXC 0x0040 /* excessive collisions occurred */ +#define TCREG_OWC 0x0020 /* out of window collision occurred */ +#define TCREG_PMB 0x0008 /* packet monitored bad */ +#define TCREG_FU 0x0004 /* FIFO underrun */ +#define TCREG_BCM 0x0002 /* byte count mismatch of fragments */ +#define TCREG_PTX 0x0001 /* packet transmitted OK */ + +/* Interrupt Mask Register */ + +#define SONIC_IMREG 0x08 +#define IMREG_BREN 0x4000 /* interrupt when bus retry occurred */ +#define IMREG_HBLEN 0x2000 /* interrupt when heartbeat lost */ +#define IMREG_LCDEN 0x1000 /* interrupt when CAM loaded */ +#define IMREG_PINTEN 0x0800 /* interrupt when PINT in TDA set */ +#define IMREG_PRXEN 0x0400 /* interrupt when packet received */ +#define IMREG_PTXEN 0x0200 /* interrupt when packet was sent */ +#define IMREG_TXEREN 0x0100 /* interrupt when send failed */ +#define IMREG_TCEN 0x0080 /* interrupt when timer completed */ +#define IMREG_RDEEN 0x0040 /* interrupt when RDA exhausted */ +#define IMREG_RBEEN 0x0020 /* interrupt when RBA exhausted */ +#define IMREG_RBAEEN 0x0010 /* interrupt when RBA too short */ +#define IMREG_CRCEN 0x0008 /* interrupt when CRC counter rolls */ +#define IMREG_FAEEN 0x0004 /* interrupt when FAE counter rolls */ +#define IMREG_MPEN 0x0002 /* interrupt when MP counter rolls */ +#define IMREG_RFOEN 0x0001 /* interrupt when Rx FIFO overflows */ + +/* Interrupt Status Register */ + +#define SONIC_ISREG 0x0a +#define ISREG_BR 0x4000 /* bus retry occurred */ +#define ISREG_HBL 0x2000 /* heartbeat lost */ +#define ISREG_LCD 0x1000 /* CAM loaded */ +#define ISREG_PINT 0x0800 /* PINT in TDA set */ +#define ISREG_PKTRX 0x0400 /* packet received */ +#define ISREG_TXDN 0x0200 /* packet was sent */ +#define ISREG_TXER 0x0100 /* send failed */ +#define ISREG_TC 0x0080 /* timer completed */ +#define ISREG_RDE 0x0040 /* RDA exhausted */ +#define ISREG_RBE 0x0020 /* RBA exhausted */ +#define ISREG_RBAE 0x0010 /* RBA too short for received frame */ +#define ISREG_CRC 0x0008 /* CRC counter rolls over */ +#define ISREG_FAE 0x0004 /* FAE counter rolls over */ +#define ISREG_MP 0x0002 /* MP counter rolls over */ +#define ISREG_RFO 0x0001 /* Rx FIFO overflows */ + +#define SONIC_UTDA 0x0c /* current transmit descr address */ +#define SONIC_CTDA 0x0e + +#define SONIC_URDA 0x1a /* current receive descr address */ +#define SONIC_CRDA 0x1c + +#define SONIC_CRBA0 0x1e /* current receive buffer address */ +#define SONIC_CRBA1 0x20 + +#define SONIC_RBWC0 0x22 /* word count in receive buffer */ +#define SONIC_RBWC1 0x24 + +#define SONIC_EOBC 0x26 /* minimum space to be free in RBA */ + +#define SONIC_URRA 0x28 /* upper address of CDA & Recv Area */ + +#define SONIC_RSA 0x2a /* start of receive resource area */ + +#define SONIC_REA 0x2c /* end of receive resource area */ + +#define SONIC_RRP 0x2e /* resource read pointer */ + +#define SONIC_RWP 0x30 /* resource write pointer */ + +#define SONIC_CAMEPTR 0x42 /* CAM entry pointer */ + +#define SONIC_CAMADDR2 0x44 /* CAM address ports */ +#define SONIC_CAMADDR1 0x46 +#define SONIC_CAMADDR0 0x48 + +#define SONIC_CAMPTR 0x4c /* lower address of CDA */ + +#define SONIC_CAMCNT 0x4e /* # of CAM descriptors to load */ + +/* Data Configuration Register 2 */ + +#define SONIC_DCREG2 0x7e +#define DCREG2_EXPO3 0x8000 /* extended programmable outputs */ +#define DCREG2_EXPO2 0x4000 +#define DCREG2_EXPO1 0x2000 +#define DCREG2_EXPO0 0x1000 +#define DCREG2_HD 0x0800 /* heartbeat disable */ +#define DCREG2_JD 0x0200 /* jabber timer disable */ +#define DCREG2_AUTO 0x0100 /* enable AUI/TP auto selection */ +#define DCREG2_XWRAP 0x0040 /* TP transceiver loopback */ +#define DCREG2_PH 0x0010 /* HOLD request timing */ +#define DCREG2_PCM 0x0004 /* packet compress when matched */ +#define DCREG2_PCNM 0x0002 /* packet compress when not matched */ +#define DCREG2_RJCM 0x0001 /* inverse packet match via CAM */ + +/* Board Control Register: Enable RAM, Interrupts... */ + +#define BCMREG 0x80 +#define BCMREG_RAMEN 0x80 /* switch over to RAM */ +#define BCMREG_IPEND 0x40 /* interrupt pending ? */ +#define BCMREG_RESET 0x08 /* reset board */ +#define BCMREG_16BIT 0x04 /* adapter in 16-bit slot */ +#define BCMREG_RAMWIN 0x02 /* enable RAM window */ +#define BCMREG_IEN 0x01 /* interrupt enable */ + +/* MAC Address PROM */ + +#define MACADDRPROM 0x92 + +/* structure of a CAM entry */ + +typedef struct { + u32 index; /* pointer into CAM area */ + u32 addr0; /* address part (bits 0..15 used) */ + u32 addr1; + u32 addr2; +} camentry_t; + +/* structure of a receive resource */ + +typedef struct { + u32 startlo; /* start address (bits 0..15 used) */ + u32 starthi; + u32 cntlo; /* size in 16-bit quantities */ + u32 cnthi; +} rra_t; + +/* structure of a receive descriptor */ + +typedef struct { + u32 status; /* packet status */ + u32 length; /* length in bytes */ + u32 startlo; /* start address */ + u32 starthi; + u32 seqno; /* frame sequence */ + u32 link; /* pointer to next descriptor */ + /* bit 0 = EOL */ + u32 inuse; /* !=0 --> free for SONIC to write */ +} rda_t; + +/* structure of a transmit descriptor */ + +typedef struct { + u32 status; /* transmit status */ + u32 config; /* value for TCR */ + u32 length; /* total length */ + u32 fragcount; /* number of fragments */ + u32 startlo; /* start address of fragment */ + u32 starthi; + u32 fraglength; /* length of this fragment */ + /* more address/length triplets may */ + /* follow here */ + u32 link; /* pointer to next descriptor */ + /* bit 0 = EOL */ +} tda_t; + +#endif /* _IBM_LANA_DRIVER_ */ + +#endif /* _IBM_LANA_INCLUDE_ */ diff --git a/drivers/net/ethernet/natsemi/jazzsonic.c b/drivers/net/ethernet/natsemi/jazzsonic.c new file mode 100644 index 000000000000..949c1f933644 --- /dev/null +++ b/drivers/net/ethernet/natsemi/jazzsonic.c @@ -0,0 +1,308 @@ +/* + * jazzsonic.c + * + * (C) 2005 Finn Thain + * + * Converted to DMA API, and (from the mac68k project) introduced + * dhd's support for 16-bit cards. + * + * (C) 1996,1998 by Thomas Bogendoerfer (tsbogend@alpha.franken.de) + * + * This driver is based on work from Andreas Busse, but most of + * the code is rewritten. + * + * (C) 1995 by Andreas Busse (andy@waldorf-gmbh.de) + * + * A driver for the onboard Sonic ethernet controller on Mips Jazz + * systems (Acer Pica-61, Mips Magnum 4000, Olivetti M700 and + * perhaps others, too) + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +static char jazz_sonic_string[] = "jazzsonic"; + +#define SONIC_MEM_SIZE 0x100 + +#include "sonic.h" + +/* + * Macros to access SONIC registers + */ +#define SONIC_READ(reg) (*((volatile unsigned int *)dev->base_addr+reg)) + +#define SONIC_WRITE(reg,val) \ +do { \ + *((volatile unsigned int *)dev->base_addr+(reg)) = (val); \ +} while (0) + + +/* use 0 for production, 1 for verification, >1 for debug */ +#ifdef SONIC_DEBUG +static unsigned int sonic_debug = SONIC_DEBUG; +#else +static unsigned int sonic_debug = 1; +#endif + +/* + * We cannot use station (ethernet) address prefixes to detect the + * sonic controller since these are board manufacturer depended. + * So we check for known Silicon Revision IDs instead. + */ +static unsigned short known_revisions[] = +{ + 0x04, /* Mips Magnum 4000 */ + 0xffff /* end of list */ +}; + +static int jazzsonic_open(struct net_device* dev) +{ + int retval; + + retval = request_irq(dev->irq, sonic_interrupt, IRQF_DISABLED, + "sonic", dev); + if (retval) { + printk(KERN_ERR "%s: unable to get IRQ %d.\n", + dev->name, dev->irq); + return retval; + } + + retval = sonic_open(dev); + if (retval) + free_irq(dev->irq, dev); + return retval; +} + +static int jazzsonic_close(struct net_device* dev) +{ + int err; + err = sonic_close(dev); + free_irq(dev->irq, dev); + return err; +} + +static const struct net_device_ops sonic_netdev_ops = { + .ndo_open = jazzsonic_open, + .ndo_stop = jazzsonic_close, + .ndo_start_xmit = sonic_send_packet, + .ndo_get_stats = sonic_get_stats, + .ndo_set_multicast_list = sonic_multicast_list, + .ndo_tx_timeout = sonic_tx_timeout, + .ndo_change_mtu = eth_change_mtu, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = eth_mac_addr, +}; + +static int __devinit sonic_probe1(struct net_device *dev) +{ + static unsigned version_printed; + unsigned int silicon_revision; + unsigned int val; + struct sonic_local *lp = netdev_priv(dev); + int err = -ENODEV; + int i; + + if (!request_mem_region(dev->base_addr, SONIC_MEM_SIZE, jazz_sonic_string)) + return -EBUSY; + + /* + * get the Silicon Revision ID. If this is one of the known + * one assume that we found a SONIC ethernet controller at + * the expected location. + */ + silicon_revision = SONIC_READ(SONIC_SR); + if (sonic_debug > 1) + printk("SONIC Silicon Revision = 0x%04x\n",silicon_revision); + + i = 0; + while (known_revisions[i] != 0xffff && + known_revisions[i] != silicon_revision) + i++; + + if (known_revisions[i] == 0xffff) { + printk("SONIC ethernet controller not found (0x%4x)\n", + silicon_revision); + goto out; + } + + if (sonic_debug && version_printed++ == 0) + printk(version); + + printk(KERN_INFO "%s: Sonic ethernet found at 0x%08lx, ", + dev_name(lp->device), dev->base_addr); + + /* + * Put the sonic into software reset, then + * retrieve and print the ethernet address. + */ + SONIC_WRITE(SONIC_CMD,SONIC_CR_RST); + SONIC_WRITE(SONIC_CEP,0); + for (i=0; i<3; i++) { + val = SONIC_READ(SONIC_CAP0-i); + dev->dev_addr[i*2] = val; + dev->dev_addr[i*2+1] = val >> 8; + } + + err = -ENOMEM; + + /* Initialize the device structure. */ + + lp->dma_bitmode = SONIC_BITMODE32; + + /* Allocate the entire chunk of memory for the descriptors. + Note that this cannot cross a 64K boundary. */ + if ((lp->descriptors = dma_alloc_coherent(lp->device, + SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode), + &lp->descriptors_laddr, GFP_KERNEL)) == NULL) { + printk(KERN_ERR "%s: couldn't alloc DMA memory for descriptors.\n", + dev_name(lp->device)); + goto out; + } + + /* Now set up the pointers to point to the appropriate places */ + lp->cda = lp->descriptors; + lp->tda = lp->cda + (SIZEOF_SONIC_CDA + * SONIC_BUS_SCALE(lp->dma_bitmode)); + lp->rda = lp->tda + (SIZEOF_SONIC_TD * SONIC_NUM_TDS + * SONIC_BUS_SCALE(lp->dma_bitmode)); + lp->rra = lp->rda + (SIZEOF_SONIC_RD * SONIC_NUM_RDS + * SONIC_BUS_SCALE(lp->dma_bitmode)); + + lp->cda_laddr = lp->descriptors_laddr; + lp->tda_laddr = lp->cda_laddr + (SIZEOF_SONIC_CDA + * SONIC_BUS_SCALE(lp->dma_bitmode)); + lp->rda_laddr = lp->tda_laddr + (SIZEOF_SONIC_TD * SONIC_NUM_TDS + * SONIC_BUS_SCALE(lp->dma_bitmode)); + lp->rra_laddr = lp->rda_laddr + (SIZEOF_SONIC_RD * SONIC_NUM_RDS + * SONIC_BUS_SCALE(lp->dma_bitmode)); + + dev->netdev_ops = &sonic_netdev_ops; + dev->watchdog_timeo = TX_TIMEOUT; + + /* + * clear tally counter + */ + SONIC_WRITE(SONIC_CRCT,0xffff); + SONIC_WRITE(SONIC_FAET,0xffff); + SONIC_WRITE(SONIC_MPT,0xffff); + + return 0; +out: + release_mem_region(dev->base_addr, SONIC_MEM_SIZE); + return err; +} + +/* + * Probe for a SONIC ethernet controller on a Mips Jazz board. + * Actually probing is superfluous but we're paranoid. + */ +static int __devinit jazz_sonic_probe(struct platform_device *pdev) +{ + struct net_device *dev; + struct sonic_local *lp; + struct resource *res; + int err = 0; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; + + dev = alloc_etherdev(sizeof(struct sonic_local)); + if (!dev) + return -ENOMEM; + + lp = netdev_priv(dev); + lp->device = &pdev->dev; + SET_NETDEV_DEV(dev, &pdev->dev); + platform_set_drvdata(pdev, dev); + + netdev_boot_setup_check(dev); + + dev->base_addr = res->start; + dev->irq = platform_get_irq(pdev, 0); + err = sonic_probe1(dev); + if (err) + goto out; + err = register_netdev(dev); + if (err) + goto out1; + + printk("%s: MAC %pM IRQ %d\n", dev->name, dev->dev_addr, dev->irq); + + return 0; + +out1: + release_mem_region(dev->base_addr, SONIC_MEM_SIZE); +out: + free_netdev(dev); + + return err; +} + +MODULE_DESCRIPTION("Jazz SONIC ethernet driver"); +module_param(sonic_debug, int, 0); +MODULE_PARM_DESC(sonic_debug, "jazzsonic debug level (1-4)"); +MODULE_ALIAS("platform:jazzsonic"); + +#include "sonic.c" + +static int __devexit jazz_sonic_device_remove (struct platform_device *pdev) +{ + struct net_device *dev = platform_get_drvdata(pdev); + struct sonic_local* lp = netdev_priv(dev); + + unregister_netdev(dev); + dma_free_coherent(lp->device, SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode), + lp->descriptors, lp->descriptors_laddr); + release_mem_region(dev->base_addr, SONIC_MEM_SIZE); + free_netdev(dev); + + return 0; +} + +static struct platform_driver jazz_sonic_driver = { + .probe = jazz_sonic_probe, + .remove = __devexit_p(jazz_sonic_device_remove), + .driver = { + .name = jazz_sonic_string, + .owner = THIS_MODULE, + }, +}; + +static int __init jazz_sonic_init_module(void) +{ + return platform_driver_register(&jazz_sonic_driver); +} + +static void __exit jazz_sonic_cleanup_module(void) +{ + platform_driver_unregister(&jazz_sonic_driver); +} + +module_init(jazz_sonic_init_module); +module_exit(jazz_sonic_cleanup_module); diff --git a/drivers/net/ethernet/natsemi/macsonic.c b/drivers/net/ethernet/natsemi/macsonic.c new file mode 100644 index 000000000000..c93679ee6994 --- /dev/null +++ b/drivers/net/ethernet/natsemi/macsonic.c @@ -0,0 +1,666 @@ +/* + * macsonic.c + * + * (C) 2005 Finn Thain + * + * Converted to DMA API, converted to unified driver model, made it work as + * a module again, and from the mac68k project, introduced more 32-bit cards + * and dhd's support for 16-bit cards. + * + * (C) 1998 Alan Cox + * + * Debugging Andreas Ehliar, Michael Schmitz + * + * Based on code + * (C) 1996 by Thomas Bogendoerfer (tsbogend@bigbug.franken.de) + * + * This driver is based on work from Andreas Busse, but most of + * the code is rewritten. + * + * (C) 1995 by Andreas Busse (andy@waldorf-gmbh.de) + * + * A driver for the Mac onboard Sonic ethernet chip. + * + * 98/12/21 MSch: judged from tests on Q800, it's basically working, + * but eating up both receive and transmit resources + * and duplicating packets. Needs more testing. + * + * 99/01/03 MSch: upgraded to version 0.92 of the core driver, fixed. + * + * 00/10/31 sammy@oh.verio.com: Updated driver for 2.4 kernels, fixed problems + * on centris. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static char mac_sonic_string[] = "macsonic"; + +#include "sonic.h" + +/* These should basically be bus-size and endian independent (since + the SONIC is at least smart enough that it uses the same endianness + as the host, unlike certain less enlightened Macintosh NICs) */ +#define SONIC_READ(reg) (nubus_readw(dev->base_addr + (reg * 4) \ + + lp->reg_offset)) +#define SONIC_WRITE(reg,val) (nubus_writew(val, dev->base_addr + (reg * 4) \ + + lp->reg_offset)) + +/* use 0 for production, 1 for verification, >1 for debug */ +#ifdef SONIC_DEBUG +static unsigned int sonic_debug = SONIC_DEBUG; +#else +static unsigned int sonic_debug = 1; +#endif + +static int sonic_version_printed; + +/* For onboard SONIC */ +#define ONBOARD_SONIC_REGISTERS 0x50F0A000 +#define ONBOARD_SONIC_PROM_BASE 0x50f08000 + +enum macsonic_type { + MACSONIC_DUODOCK, + MACSONIC_APPLE, + MACSONIC_APPLE16, + MACSONIC_DAYNA, + MACSONIC_DAYNALINK +}; + +/* For the built-in SONIC in the Duo Dock */ +#define DUODOCK_SONIC_REGISTERS 0xe10000 +#define DUODOCK_SONIC_PROM_BASE 0xe12000 + +/* For Apple-style NuBus SONIC */ +#define APPLE_SONIC_REGISTERS 0 +#define APPLE_SONIC_PROM_BASE 0x40000 + +/* Daynalink LC SONIC */ +#define DAYNALINK_PROM_BASE 0x400000 + +/* For Dayna-style NuBus SONIC (haven't seen one yet) */ +#define DAYNA_SONIC_REGISTERS 0x180000 +/* This is what OpenBSD says. However, this is definitely in NuBus + ROM space so we should be able to get it by walking the NuBus + resource directories */ +#define DAYNA_SONIC_MAC_ADDR 0xffe004 + +#define SONIC_READ_PROM(addr) nubus_readb(prom_addr+addr) + +/* + * For reversing the PROM address + */ + +static inline void bit_reverse_addr(unsigned char addr[6]) +{ + int i; + + for(i = 0; i < 6; i++) + addr[i] = bitrev8(addr[i]); +} + +static irqreturn_t macsonic_interrupt(int irq, void *dev_id) +{ + irqreturn_t result; + unsigned long flags; + + local_irq_save(flags); + result = sonic_interrupt(irq, dev_id); + local_irq_restore(flags); + return result; +} + +static int macsonic_open(struct net_device* dev) +{ + int retval; + + retval = request_irq(dev->irq, sonic_interrupt, IRQ_FLG_FAST, + "sonic", dev); + if (retval) { + printk(KERN_ERR "%s: unable to get IRQ %d.\n", + dev->name, dev->irq); + goto err; + } + /* Under the A/UX interrupt scheme, the onboard SONIC interrupt comes + * in at priority level 3. However, we sometimes get the level 2 inter- + * rupt as well, which must prevent re-entrance of the sonic handler. + */ + if (dev->irq == IRQ_AUTO_3) { + retval = request_irq(IRQ_NUBUS_9, macsonic_interrupt, + IRQ_FLG_FAST, "sonic", dev); + if (retval) { + printk(KERN_ERR "%s: unable to get IRQ %d.\n", + dev->name, IRQ_NUBUS_9); + goto err_irq; + } + } + retval = sonic_open(dev); + if (retval) + goto err_irq_nubus; + return 0; + +err_irq_nubus: + if (dev->irq == IRQ_AUTO_3) + free_irq(IRQ_NUBUS_9, dev); +err_irq: + free_irq(dev->irq, dev); +err: + return retval; +} + +static int macsonic_close(struct net_device* dev) +{ + int err; + err = sonic_close(dev); + free_irq(dev->irq, dev); + if (dev->irq == IRQ_AUTO_3) + free_irq(IRQ_NUBUS_9, dev); + return err; +} + +static const struct net_device_ops macsonic_netdev_ops = { + .ndo_open = macsonic_open, + .ndo_stop = macsonic_close, + .ndo_start_xmit = sonic_send_packet, + .ndo_set_multicast_list = sonic_multicast_list, + .ndo_tx_timeout = sonic_tx_timeout, + .ndo_get_stats = sonic_get_stats, + .ndo_validate_addr = eth_validate_addr, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, +}; + +static int __devinit macsonic_init(struct net_device *dev) +{ + struct sonic_local* lp = netdev_priv(dev); + + /* Allocate the entire chunk of memory for the descriptors. + Note that this cannot cross a 64K boundary. */ + if ((lp->descriptors = dma_alloc_coherent(lp->device, + SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode), + &lp->descriptors_laddr, GFP_KERNEL)) == NULL) { + printk(KERN_ERR "%s: couldn't alloc DMA memory for descriptors.\n", + dev_name(lp->device)); + return -ENOMEM; + } + + /* Now set up the pointers to point to the appropriate places */ + lp->cda = lp->descriptors; + lp->tda = lp->cda + (SIZEOF_SONIC_CDA + * SONIC_BUS_SCALE(lp->dma_bitmode)); + lp->rda = lp->tda + (SIZEOF_SONIC_TD * SONIC_NUM_TDS + * SONIC_BUS_SCALE(lp->dma_bitmode)); + lp->rra = lp->rda + (SIZEOF_SONIC_RD * SONIC_NUM_RDS + * SONIC_BUS_SCALE(lp->dma_bitmode)); + + lp->cda_laddr = lp->descriptors_laddr; + lp->tda_laddr = lp->cda_laddr + (SIZEOF_SONIC_CDA + * SONIC_BUS_SCALE(lp->dma_bitmode)); + lp->rda_laddr = lp->tda_laddr + (SIZEOF_SONIC_TD * SONIC_NUM_TDS + * SONIC_BUS_SCALE(lp->dma_bitmode)); + lp->rra_laddr = lp->rda_laddr + (SIZEOF_SONIC_RD * SONIC_NUM_RDS + * SONIC_BUS_SCALE(lp->dma_bitmode)); + + dev->netdev_ops = &macsonic_netdev_ops; + dev->watchdog_timeo = TX_TIMEOUT; + + /* + * clear tally counter + */ + SONIC_WRITE(SONIC_CRCT, 0xffff); + SONIC_WRITE(SONIC_FAET, 0xffff); + SONIC_WRITE(SONIC_MPT, 0xffff); + + return 0; +} + +#define INVALID_MAC(mac) (memcmp(mac, "\x08\x00\x07", 3) && \ + memcmp(mac, "\x00\xA0\x40", 3) && \ + memcmp(mac, "\x00\x80\x19", 3) && \ + memcmp(mac, "\x00\x05\x02", 3)) + +static void __devinit mac_onboard_sonic_ethernet_addr(struct net_device *dev) +{ + struct sonic_local *lp = netdev_priv(dev); + const int prom_addr = ONBOARD_SONIC_PROM_BASE; + unsigned short val; + + /* + * On NuBus boards we can sometimes look in the ROM resources. + * No such luck for comm-slot/onboard. + * On the PowerBook 520, the PROM base address is a mystery. + */ + if (hwreg_present((void *)prom_addr)) { + int i; + + for (i = 0; i < 6; i++) + dev->dev_addr[i] = SONIC_READ_PROM(i); + if (!INVALID_MAC(dev->dev_addr)) + return; + + /* + * Most of the time, the address is bit-reversed. The NetBSD + * source has a rather long and detailed historical account of + * why this is so. + */ + bit_reverse_addr(dev->dev_addr); + if (!INVALID_MAC(dev->dev_addr)) + return; + + /* + * If we still have what seems to be a bogus address, we'll + * look in the CAM. The top entry should be ours. + */ + printk(KERN_WARNING "macsonic: MAC address in PROM seems " + "to be invalid, trying CAM\n"); + } else { + printk(KERN_WARNING "macsonic: cannot read MAC address from " + "PROM, trying CAM\n"); + } + + /* This only works if MacOS has already initialized the card. */ + + SONIC_WRITE(SONIC_CMD, SONIC_CR_RST); + SONIC_WRITE(SONIC_CEP, 15); + + val = SONIC_READ(SONIC_CAP2); + dev->dev_addr[5] = val >> 8; + dev->dev_addr[4] = val & 0xff; + val = SONIC_READ(SONIC_CAP1); + dev->dev_addr[3] = val >> 8; + dev->dev_addr[2] = val & 0xff; + val = SONIC_READ(SONIC_CAP0); + dev->dev_addr[1] = val >> 8; + dev->dev_addr[0] = val & 0xff; + + if (!INVALID_MAC(dev->dev_addr)) + return; + + /* Still nonsense ... messed up someplace! */ + + printk(KERN_WARNING "macsonic: MAC address in CAM entry 15 " + "seems invalid, will use a random MAC\n"); + random_ether_addr(dev->dev_addr); +} + +static int __devinit mac_onboard_sonic_probe(struct net_device *dev) +{ + /* Bwahahaha */ + static int once_is_more_than_enough; + struct sonic_local* lp = netdev_priv(dev); + int sr; + int commslot = 0; + + if (once_is_more_than_enough) + return -ENODEV; + once_is_more_than_enough = 1; + + if (!MACH_IS_MAC) + return -ENODEV; + + if (macintosh_config->ether_type != MAC_ETHER_SONIC) + return -ENODEV; + + printk(KERN_INFO "Checking for internal Macintosh ethernet (SONIC).. "); + + /* Bogus probing, on the models which may or may not have + Ethernet (BTW, the Ethernet *is* always at the same + address, and nothing else lives there, at least if Apple's + documentation is to be believed) */ + if (macintosh_config->ident == MAC_MODEL_Q630 || + macintosh_config->ident == MAC_MODEL_P588 || + macintosh_config->ident == MAC_MODEL_P575 || + macintosh_config->ident == MAC_MODEL_C610) { + unsigned long flags; + int card_present; + + local_irq_save(flags); + card_present = hwreg_present((void*)ONBOARD_SONIC_REGISTERS); + local_irq_restore(flags); + + if (!card_present) { + printk("none.\n"); + return -ENODEV; + } + commslot = 1; + } + + printk("yes\n"); + + /* Danger! My arms are flailing wildly! You *must* set lp->reg_offset + * and dev->base_addr before using SONIC_READ() or SONIC_WRITE() */ + dev->base_addr = ONBOARD_SONIC_REGISTERS; + if (via_alt_mapping) + dev->irq = IRQ_AUTO_3; + else + dev->irq = IRQ_NUBUS_9; + + if (!sonic_version_printed) { + printk(KERN_INFO "%s", version); + sonic_version_printed = 1; + } + printk(KERN_INFO "%s: onboard / comm-slot SONIC at 0x%08lx\n", + dev_name(lp->device), dev->base_addr); + + /* The PowerBook's SONIC is 16 bit always. */ + if (macintosh_config->ident == MAC_MODEL_PB520) { + lp->reg_offset = 0; + lp->dma_bitmode = SONIC_BITMODE16; + sr = SONIC_READ(SONIC_SR); + } else if (commslot) { + /* Some of the comm-slot cards are 16 bit. But some + of them are not. The 32-bit cards use offset 2 and + have known revisions, we try reading the revision + register at offset 2, if we don't get a known revision + we assume 16 bit at offset 0. */ + lp->reg_offset = 2; + lp->dma_bitmode = SONIC_BITMODE16; + + sr = SONIC_READ(SONIC_SR); + if (sr == 0x0004 || sr == 0x0006 || sr == 0x0100 || sr == 0x0101) + /* 83932 is 0x0004 or 0x0006, 83934 is 0x0100 or 0x0101 */ + lp->dma_bitmode = SONIC_BITMODE32; + else { + lp->dma_bitmode = SONIC_BITMODE16; + lp->reg_offset = 0; + sr = SONIC_READ(SONIC_SR); + } + } else { + /* All onboard cards are at offset 2 with 32 bit DMA. */ + lp->reg_offset = 2; + lp->dma_bitmode = SONIC_BITMODE32; + sr = SONIC_READ(SONIC_SR); + } + printk(KERN_INFO + "%s: revision 0x%04x, using %d bit DMA and register offset %d\n", + dev_name(lp->device), sr, lp->dma_bitmode?32:16, lp->reg_offset); + +#if 0 /* This is sometimes useful to find out how MacOS configured the card. */ + printk(KERN_INFO "%s: DCR: 0x%04x, DCR2: 0x%04x\n", dev_name(lp->device), + SONIC_READ(SONIC_DCR) & 0xffff, SONIC_READ(SONIC_DCR2) & 0xffff); +#endif + + /* Software reset, then initialize control registers. */ + SONIC_WRITE(SONIC_CMD, SONIC_CR_RST); + + SONIC_WRITE(SONIC_DCR, SONIC_DCR_EXBUS | SONIC_DCR_BMS | + SONIC_DCR_RFT1 | SONIC_DCR_TFT0 | + (lp->dma_bitmode ? SONIC_DCR_DW : 0)); + + /* This *must* be written back to in order to restore the + * extended programmable output bits, as it may not have been + * initialised since the hardware reset. */ + SONIC_WRITE(SONIC_DCR2, 0); + + /* Clear *and* disable interrupts to be on the safe side */ + SONIC_WRITE(SONIC_IMR, 0); + SONIC_WRITE(SONIC_ISR, 0x7fff); + + /* Now look for the MAC address. */ + mac_onboard_sonic_ethernet_addr(dev); + + /* Shared init code */ + return macsonic_init(dev); +} + +static int __devinit mac_nubus_sonic_ethernet_addr(struct net_device *dev, + unsigned long prom_addr, + int id) +{ + int i; + for(i = 0; i < 6; i++) + dev->dev_addr[i] = SONIC_READ_PROM(i); + + /* Some of the addresses are bit-reversed */ + if (id != MACSONIC_DAYNA) + bit_reverse_addr(dev->dev_addr); + + return 0; +} + +static int __devinit macsonic_ident(struct nubus_dev *ndev) +{ + if (ndev->dr_hw == NUBUS_DRHW_ASANTE_LC && + ndev->dr_sw == NUBUS_DRSW_SONIC_LC) + return MACSONIC_DAYNALINK; + if (ndev->dr_hw == NUBUS_DRHW_SONIC && + ndev->dr_sw == NUBUS_DRSW_APPLE) { + /* There has to be a better way to do this... */ + if (strstr(ndev->board->name, "DuoDock")) + return MACSONIC_DUODOCK; + else + return MACSONIC_APPLE; + } + + if (ndev->dr_hw == NUBUS_DRHW_SMC9194 && + ndev->dr_sw == NUBUS_DRSW_DAYNA) + return MACSONIC_DAYNA; + + if (ndev->dr_hw == NUBUS_DRHW_APPLE_SONIC_LC && + ndev->dr_sw == 0) { /* huh? */ + return MACSONIC_APPLE16; + } + return -1; +} + +static int __devinit mac_nubus_sonic_probe(struct net_device *dev) +{ + static int slots; + struct nubus_dev* ndev = NULL; + struct sonic_local* lp = netdev_priv(dev); + unsigned long base_addr, prom_addr; + u16 sonic_dcr; + int id = -1; + int reg_offset, dma_bitmode; + + /* Find the first SONIC that hasn't been initialized already */ + while ((ndev = nubus_find_type(NUBUS_CAT_NETWORK, + NUBUS_TYPE_ETHERNET, ndev)) != NULL) + { + /* Have we seen it already? */ + if (slots & (1<board->slot)) + continue; + slots |= 1<board->slot; + + /* Is it one of ours? */ + if ((id = macsonic_ident(ndev)) != -1) + break; + } + + if (ndev == NULL) + return -ENODEV; + + switch (id) { + case MACSONIC_DUODOCK: + base_addr = ndev->board->slot_addr + DUODOCK_SONIC_REGISTERS; + prom_addr = ndev->board->slot_addr + DUODOCK_SONIC_PROM_BASE; + sonic_dcr = SONIC_DCR_EXBUS | SONIC_DCR_RFT0 | SONIC_DCR_RFT1 | + SONIC_DCR_TFT0; + reg_offset = 2; + dma_bitmode = SONIC_BITMODE32; + break; + case MACSONIC_APPLE: + base_addr = ndev->board->slot_addr + APPLE_SONIC_REGISTERS; + prom_addr = ndev->board->slot_addr + APPLE_SONIC_PROM_BASE; + sonic_dcr = SONIC_DCR_BMS | SONIC_DCR_RFT1 | SONIC_DCR_TFT0; + reg_offset = 0; + dma_bitmode = SONIC_BITMODE32; + break; + case MACSONIC_APPLE16: + base_addr = ndev->board->slot_addr + APPLE_SONIC_REGISTERS; + prom_addr = ndev->board->slot_addr + APPLE_SONIC_PROM_BASE; + sonic_dcr = SONIC_DCR_EXBUS | SONIC_DCR_RFT1 | SONIC_DCR_TFT0 | + SONIC_DCR_PO1 | SONIC_DCR_BMS; + reg_offset = 0; + dma_bitmode = SONIC_BITMODE16; + break; + case MACSONIC_DAYNALINK: + base_addr = ndev->board->slot_addr + APPLE_SONIC_REGISTERS; + prom_addr = ndev->board->slot_addr + DAYNALINK_PROM_BASE; + sonic_dcr = SONIC_DCR_RFT1 | SONIC_DCR_TFT0 | + SONIC_DCR_PO1 | SONIC_DCR_BMS; + reg_offset = 0; + dma_bitmode = SONIC_BITMODE16; + break; + case MACSONIC_DAYNA: + base_addr = ndev->board->slot_addr + DAYNA_SONIC_REGISTERS; + prom_addr = ndev->board->slot_addr + DAYNA_SONIC_MAC_ADDR; + sonic_dcr = SONIC_DCR_BMS | + SONIC_DCR_RFT1 | SONIC_DCR_TFT0 | SONIC_DCR_PO1; + reg_offset = 0; + dma_bitmode = SONIC_BITMODE16; + break; + default: + printk(KERN_ERR "macsonic: WTF, id is %d\n", id); + return -ENODEV; + } + + /* Danger! My arms are flailing wildly! You *must* set lp->reg_offset + * and dev->base_addr before using SONIC_READ() or SONIC_WRITE() */ + dev->base_addr = base_addr; + lp->reg_offset = reg_offset; + lp->dma_bitmode = dma_bitmode; + dev->irq = SLOT2IRQ(ndev->board->slot); + + if (!sonic_version_printed) { + printk(KERN_INFO "%s", version); + sonic_version_printed = 1; + } + printk(KERN_INFO "%s: %s in slot %X\n", + dev_name(lp->device), ndev->board->name, ndev->board->slot); + printk(KERN_INFO "%s: revision 0x%04x, using %d bit DMA and register offset %d\n", + dev_name(lp->device), SONIC_READ(SONIC_SR), dma_bitmode?32:16, reg_offset); + +#if 0 /* This is sometimes useful to find out how MacOS configured the card. */ + printk(KERN_INFO "%s: DCR: 0x%04x, DCR2: 0x%04x\n", dev_name(lp->device), + SONIC_READ(SONIC_DCR) & 0xffff, SONIC_READ(SONIC_DCR2) & 0xffff); +#endif + + /* Software reset, then initialize control registers. */ + SONIC_WRITE(SONIC_CMD, SONIC_CR_RST); + SONIC_WRITE(SONIC_DCR, sonic_dcr | (dma_bitmode ? SONIC_DCR_DW : 0)); + /* This *must* be written back to in order to restore the + * extended programmable output bits, since it may not have been + * initialised since the hardware reset. */ + SONIC_WRITE(SONIC_DCR2, 0); + + /* Clear *and* disable interrupts to be on the safe side */ + SONIC_WRITE(SONIC_IMR, 0); + SONIC_WRITE(SONIC_ISR, 0x7fff); + + /* Now look for the MAC address. */ + if (mac_nubus_sonic_ethernet_addr(dev, prom_addr, id) != 0) + return -ENODEV; + + /* Shared init code */ + return macsonic_init(dev); +} + +static int __devinit mac_sonic_probe(struct platform_device *pdev) +{ + struct net_device *dev; + struct sonic_local *lp; + int err; + + dev = alloc_etherdev(sizeof(struct sonic_local)); + if (!dev) + return -ENOMEM; + + lp = netdev_priv(dev); + lp->device = &pdev->dev; + SET_NETDEV_DEV(dev, &pdev->dev); + platform_set_drvdata(pdev, dev); + + /* This will catch fatal stuff like -ENOMEM as well as success */ + err = mac_onboard_sonic_probe(dev); + if (err == 0) + goto found; + if (err != -ENODEV) + goto out; + err = mac_nubus_sonic_probe(dev); + if (err) + goto out; +found: + err = register_netdev(dev); + if (err) + goto out; + + printk("%s: MAC %pM IRQ %d\n", dev->name, dev->dev_addr, dev->irq); + + return 0; + +out: + free_netdev(dev); + + return err; +} + +MODULE_DESCRIPTION("Macintosh SONIC ethernet driver"); +module_param(sonic_debug, int, 0); +MODULE_PARM_DESC(sonic_debug, "macsonic debug level (1-4)"); +MODULE_ALIAS("platform:macsonic"); + +#include "sonic.c" + +static int __devexit mac_sonic_device_remove (struct platform_device *pdev) +{ + struct net_device *dev = platform_get_drvdata(pdev); + struct sonic_local* lp = netdev_priv(dev); + + unregister_netdev(dev); + dma_free_coherent(lp->device, SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode), + lp->descriptors, lp->descriptors_laddr); + free_netdev(dev); + + return 0; +} + +static struct platform_driver mac_sonic_driver = { + .probe = mac_sonic_probe, + .remove = __devexit_p(mac_sonic_device_remove), + .driver = { + .name = mac_sonic_string, + .owner = THIS_MODULE, + }, +}; + +static int __init mac_sonic_init_module(void) +{ + return platform_driver_register(&mac_sonic_driver); +} + +static void __exit mac_sonic_cleanup_module(void) +{ + platform_driver_unregister(&mac_sonic_driver); +} + +module_init(mac_sonic_init_module); +module_exit(mac_sonic_cleanup_module); diff --git a/drivers/net/ethernet/natsemi/natsemi.c b/drivers/net/ethernet/natsemi/natsemi.c new file mode 100644 index 000000000000..2962cc695ce3 --- /dev/null +++ b/drivers/net/ethernet/natsemi/natsemi.c @@ -0,0 +1,3370 @@ +/* natsemi.c: A Linux PCI Ethernet driver for the NatSemi DP8381x series. */ +/* + Written/copyright 1999-2001 by Donald Becker. + Portions copyright (c) 2001,2002 Sun Microsystems (thockin@sun.com) + Portions copyright 2001,2002 Manfred Spraul (manfred@colorfullife.com) + Portions copyright 2004 Harald Welte + + This software may be used and distributed according to the terms of + the GNU General Public License (GPL), incorporated herein by reference. + Drivers based on or derived from this code fall under the GPL and must + retain the authorship, copyright and license notice. This file is not + a complete program and may only be used when the entire operating + system is licensed under the GPL. License for under other terms may be + available. Contact the original author for details. + + The original author may be reached as becker@scyld.com, or at + Scyld Computing Corporation + 410 Severn Ave., Suite 210 + Annapolis MD 21403 + + Support information and updates available at + http://www.scyld.com/network/netsemi.html + [link no longer provides useful info -jgarzik] + + + TODO: + * big endian support with CFG:BEM instead of cpu_to_le32 +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include /* Processor type for cache alignment. */ +#include +#include +#include + +#define DRV_NAME "natsemi" +#define DRV_VERSION "2.1" +#define DRV_RELDATE "Sept 11, 2006" + +#define RX_OFFSET 2 + +/* Updated to recommendations in pci-skeleton v2.03. */ + +/* The user-configurable values. + These may be modified when a driver module is loaded.*/ + +#define NATSEMI_DEF_MSG (NETIF_MSG_DRV | \ + NETIF_MSG_LINK | \ + NETIF_MSG_WOL | \ + NETIF_MSG_RX_ERR | \ + NETIF_MSG_TX_ERR) +static int debug = -1; + +static int mtu; + +/* Maximum number of multicast addresses to filter (vs. rx-all-multicast). + This chip uses a 512 element hash table based on the Ethernet CRC. */ +static const int multicast_filter_limit = 100; + +/* Set the copy breakpoint for the copy-only-tiny-frames scheme. + Setting to > 1518 effectively disables this feature. */ +static int rx_copybreak; + +static int dspcfg_workaround = 1; + +/* Used to pass the media type, etc. + Both 'options[]' and 'full_duplex[]' should exist for driver + interoperability. + The media type is usually passed in 'options[]'. +*/ +#define MAX_UNITS 8 /* More are supported, limit only on options */ +static int options[MAX_UNITS]; +static int full_duplex[MAX_UNITS]; + +/* Operational parameters that are set at compile time. */ + +/* Keep the ring sizes a power of two for compile efficiency. + The compiler will convert '%'<2^N> into a bit mask. + Making the Tx ring too large decreases the effectiveness of channel + bonding and packet priority. + There are no ill effects from too-large receive rings. */ +#define TX_RING_SIZE 16 +#define TX_QUEUE_LEN 10 /* Limit ring entries actually used, min 4. */ +#define RX_RING_SIZE 32 + +/* Operational parameters that usually are not changed. */ +/* Time in jiffies before concluding the transmitter is hung. */ +#define TX_TIMEOUT (2*HZ) + +#define NATSEMI_HW_TIMEOUT 400 +#define NATSEMI_TIMER_FREQ 5*HZ +#define NATSEMI_PG0_NREGS 64 +#define NATSEMI_RFDR_NREGS 8 +#define NATSEMI_PG1_NREGS 4 +#define NATSEMI_NREGS (NATSEMI_PG0_NREGS + NATSEMI_RFDR_NREGS + \ + NATSEMI_PG1_NREGS) +#define NATSEMI_REGS_VER 1 /* v1 added RFDR registers */ +#define NATSEMI_REGS_SIZE (NATSEMI_NREGS * sizeof(u32)) + +/* Buffer sizes: + * The nic writes 32-bit values, even if the upper bytes of + * a 32-bit value are beyond the end of the buffer. + */ +#define NATSEMI_HEADERS 22 /* 2*mac,type,vlan,crc */ +#define NATSEMI_PADDING 16 /* 2 bytes should be sufficient */ +#define NATSEMI_LONGPKT 1518 /* limit for normal packets */ +#define NATSEMI_RX_LIMIT 2046 /* maximum supported by hardware */ + +/* These identify the driver base version and may not be removed. */ +static const char version[] __devinitconst = + KERN_INFO DRV_NAME " dp8381x driver, version " + DRV_VERSION ", " DRV_RELDATE "\n" + " originally by Donald Becker \n" + " 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder\n"; + +MODULE_AUTHOR("Donald Becker "); +MODULE_DESCRIPTION("National Semiconductor DP8381x series PCI Ethernet driver"); +MODULE_LICENSE("GPL"); + +module_param(mtu, int, 0); +module_param(debug, int, 0); +module_param(rx_copybreak, int, 0); +module_param(dspcfg_workaround, int, 0); +module_param_array(options, int, NULL, 0); +module_param_array(full_duplex, int, NULL, 0); +MODULE_PARM_DESC(mtu, "DP8381x MTU (all boards)"); +MODULE_PARM_DESC(debug, "DP8381x default debug level"); +MODULE_PARM_DESC(rx_copybreak, + "DP8381x copy breakpoint for copy-only-tiny-frames"); +MODULE_PARM_DESC(dspcfg_workaround, "DP8381x: control DspCfg workaround"); +MODULE_PARM_DESC(options, + "DP8381x: Bits 0-3: media type, bit 17: full duplex"); +MODULE_PARM_DESC(full_duplex, "DP8381x full duplex setting(s) (1)"); + +/* + Theory of Operation + +I. Board Compatibility + +This driver is designed for National Semiconductor DP83815 PCI Ethernet NIC. +It also works with other chips in in the DP83810 series. + +II. Board-specific settings + +This driver requires the PCI interrupt line to be valid. +It honors the EEPROM-set values. + +III. Driver operation + +IIIa. Ring buffers + +This driver uses two statically allocated fixed-size descriptor lists +formed into rings by a branch from the final descriptor to the beginning of +the list. The ring sizes are set at compile time by RX/TX_RING_SIZE. +The NatSemi design uses a 'next descriptor' pointer that the driver forms +into a list. + +IIIb/c. Transmit/Receive Structure + +This driver uses a zero-copy receive and transmit scheme. +The driver allocates full frame size skbuffs for the Rx ring buffers at +open() time and passes the skb->data field to the chip as receive data +buffers. When an incoming frame is less than RX_COPYBREAK bytes long, +a fresh skbuff is allocated and the frame is copied to the new skbuff. +When the incoming frame is larger, the skbuff is passed directly up the +protocol stack. Buffers consumed this way are replaced by newly allocated +skbuffs in a later phase of receives. + +The RX_COPYBREAK value is chosen to trade-off the memory wasted by +using a full-sized skbuff for small frames vs. the copying costs of larger +frames. New boards are typically used in generously configured machines +and the underfilled buffers have negligible impact compared to the benefit of +a single allocation size, so the default value of zero results in never +copying packets. When copying is done, the cost is usually mitigated by using +a combined copy/checksum routine. Copying also preloads the cache, which is +most useful with small frames. + +A subtle aspect of the operation is that unaligned buffers are not permitted +by the hardware. Thus the IP header at offset 14 in an ethernet frame isn't +longword aligned for further processing. On copies frames are put into the +skbuff at an offset of "+2", 16-byte aligning the IP header. + +IIId. Synchronization + +Most operations are synchronized on the np->lock irq spinlock, except the +receive and transmit paths which are synchronised using a combination of +hardware descriptor ownership, disabling interrupts and NAPI poll scheduling. + +IVb. References + +http://www.scyld.com/expert/100mbps.html +http://www.scyld.com/expert/NWay.html +Datasheet is available from: +http://www.national.com/pf/DP/DP83815.html + +IVc. Errata + +None characterised. +*/ + + + +/* + * Support for fibre connections on Am79C874: + * This phy needs a special setup when connected to a fibre cable. + * http://www.amd.com/files/connectivitysolutions/networking/archivednetworking/22235.pdf + */ +#define PHYID_AM79C874 0x0022561b + +enum { + MII_MCTRL = 0x15, /* mode control register */ + MII_FX_SEL = 0x0001, /* 100BASE-FX (fiber) */ + MII_EN_SCRM = 0x0004, /* enable scrambler (tp) */ +}; + +enum { + NATSEMI_FLAG_IGNORE_PHY = 0x1, +}; + +/* array of board data directly indexed by pci_tbl[x].driver_data */ +static struct { + const char *name; + unsigned long flags; + unsigned int eeprom_size; +} natsemi_pci_info[] __devinitdata = { + { "Aculab E1/T1 PMXc cPCI carrier card", NATSEMI_FLAG_IGNORE_PHY, 128 }, + { "NatSemi DP8381[56]", 0, 24 }, +}; + +static DEFINE_PCI_DEVICE_TABLE(natsemi_pci_tbl) = { + { PCI_VENDOR_ID_NS, 0x0020, 0x12d9, 0x000c, 0, 0, 0 }, + { PCI_VENDOR_ID_NS, 0x0020, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 }, + { } /* terminate list */ +}; +MODULE_DEVICE_TABLE(pci, natsemi_pci_tbl); + +/* Offsets to the device registers. + Unlike software-only systems, device drivers interact with complex hardware. + It's not useful to define symbolic names for every register bit in the + device. +*/ +enum register_offsets { + ChipCmd = 0x00, + ChipConfig = 0x04, + EECtrl = 0x08, + PCIBusCfg = 0x0C, + IntrStatus = 0x10, + IntrMask = 0x14, + IntrEnable = 0x18, + IntrHoldoff = 0x1C, /* DP83816 only */ + TxRingPtr = 0x20, + TxConfig = 0x24, + RxRingPtr = 0x30, + RxConfig = 0x34, + ClkRun = 0x3C, + WOLCmd = 0x40, + PauseCmd = 0x44, + RxFilterAddr = 0x48, + RxFilterData = 0x4C, + BootRomAddr = 0x50, + BootRomData = 0x54, + SiliconRev = 0x58, + StatsCtrl = 0x5C, + StatsData = 0x60, + RxPktErrs = 0x60, + RxMissed = 0x68, + RxCRCErrs = 0x64, + BasicControl = 0x80, + BasicStatus = 0x84, + AnegAdv = 0x90, + AnegPeer = 0x94, + PhyStatus = 0xC0, + MIntrCtrl = 0xC4, + MIntrStatus = 0xC8, + PhyCtrl = 0xE4, + + /* These are from the spec, around page 78... on a separate table. + * The meaning of these registers depend on the value of PGSEL. */ + PGSEL = 0xCC, + PMDCSR = 0xE4, + TSTDAT = 0xFC, + DSPCFG = 0xF4, + SDCFG = 0xF8 +}; +/* the values for the 'magic' registers above (PGSEL=1) */ +#define PMDCSR_VAL 0x189c /* enable preferred adaptation circuitry */ +#define TSTDAT_VAL 0x0 +#define DSPCFG_VAL 0x5040 +#define SDCFG_VAL 0x008c /* set voltage thresholds for Signal Detect */ +#define DSPCFG_LOCK 0x20 /* coefficient lock bit in DSPCFG */ +#define DSPCFG_COEF 0x1000 /* see coefficient (in TSTDAT) bit in DSPCFG */ +#define TSTDAT_FIXED 0xe8 /* magic number for bad coefficients */ + +/* misc PCI space registers */ +enum pci_register_offsets { + PCIPM = 0x44, +}; + +enum ChipCmd_bits { + ChipReset = 0x100, + RxReset = 0x20, + TxReset = 0x10, + RxOff = 0x08, + RxOn = 0x04, + TxOff = 0x02, + TxOn = 0x01, +}; + +enum ChipConfig_bits { + CfgPhyDis = 0x200, + CfgPhyRst = 0x400, + CfgExtPhy = 0x1000, + CfgAnegEnable = 0x2000, + CfgAneg100 = 0x4000, + CfgAnegFull = 0x8000, + CfgAnegDone = 0x8000000, + CfgFullDuplex = 0x20000000, + CfgSpeed100 = 0x40000000, + CfgLink = 0x80000000, +}; + +enum EECtrl_bits { + EE_ShiftClk = 0x04, + EE_DataIn = 0x01, + EE_ChipSelect = 0x08, + EE_DataOut = 0x02, + MII_Data = 0x10, + MII_Write = 0x20, + MII_ShiftClk = 0x40, +}; + +enum PCIBusCfg_bits { + EepromReload = 0x4, +}; + +/* Bits in the interrupt status/mask registers. */ +enum IntrStatus_bits { + IntrRxDone = 0x0001, + IntrRxIntr = 0x0002, + IntrRxErr = 0x0004, + IntrRxEarly = 0x0008, + IntrRxIdle = 0x0010, + IntrRxOverrun = 0x0020, + IntrTxDone = 0x0040, + IntrTxIntr = 0x0080, + IntrTxErr = 0x0100, + IntrTxIdle = 0x0200, + IntrTxUnderrun = 0x0400, + StatsMax = 0x0800, + SWInt = 0x1000, + WOLPkt = 0x2000, + LinkChange = 0x4000, + IntrHighBits = 0x8000, + RxStatusFIFOOver = 0x10000, + IntrPCIErr = 0xf00000, + RxResetDone = 0x1000000, + TxResetDone = 0x2000000, + IntrAbnormalSummary = 0xCD20, +}; + +/* + * Default Interrupts: + * Rx OK, Rx Packet Error, Rx Overrun, + * Tx OK, Tx Packet Error, Tx Underrun, + * MIB Service, Phy Interrupt, High Bits, + * Rx Status FIFO overrun, + * Received Target Abort, Received Master Abort, + * Signalled System Error, Received Parity Error + */ +#define DEFAULT_INTR 0x00f1cd65 + +enum TxConfig_bits { + TxDrthMask = 0x3f, + TxFlthMask = 0x3f00, + TxMxdmaMask = 0x700000, + TxMxdma_512 = 0x0, + TxMxdma_4 = 0x100000, + TxMxdma_8 = 0x200000, + TxMxdma_16 = 0x300000, + TxMxdma_32 = 0x400000, + TxMxdma_64 = 0x500000, + TxMxdma_128 = 0x600000, + TxMxdma_256 = 0x700000, + TxCollRetry = 0x800000, + TxAutoPad = 0x10000000, + TxMacLoop = 0x20000000, + TxHeartIgn = 0x40000000, + TxCarrierIgn = 0x80000000 +}; + +/* + * Tx Configuration: + * - 256 byte DMA burst length + * - fill threshold 512 bytes (i.e. restart DMA when 512 bytes are free) + * - 64 bytes initial drain threshold (i.e. begin actual transmission + * when 64 byte are in the fifo) + * - on tx underruns, increase drain threshold by 64. + * - at most use a drain threshold of 1472 bytes: The sum of the fill + * threshold and the drain threshold must be less than 2016 bytes. + * + */ +#define TX_FLTH_VAL ((512/32) << 8) +#define TX_DRTH_VAL_START (64/32) +#define TX_DRTH_VAL_INC 2 +#define TX_DRTH_VAL_LIMIT (1472/32) + +enum RxConfig_bits { + RxDrthMask = 0x3e, + RxMxdmaMask = 0x700000, + RxMxdma_512 = 0x0, + RxMxdma_4 = 0x100000, + RxMxdma_8 = 0x200000, + RxMxdma_16 = 0x300000, + RxMxdma_32 = 0x400000, + RxMxdma_64 = 0x500000, + RxMxdma_128 = 0x600000, + RxMxdma_256 = 0x700000, + RxAcceptLong = 0x8000000, + RxAcceptTx = 0x10000000, + RxAcceptRunt = 0x40000000, + RxAcceptErr = 0x80000000 +}; +#define RX_DRTH_VAL (128/8) + +enum ClkRun_bits { + PMEEnable = 0x100, + PMEStatus = 0x8000, +}; + +enum WolCmd_bits { + WakePhy = 0x1, + WakeUnicast = 0x2, + WakeMulticast = 0x4, + WakeBroadcast = 0x8, + WakeArp = 0x10, + WakePMatch0 = 0x20, + WakePMatch1 = 0x40, + WakePMatch2 = 0x80, + WakePMatch3 = 0x100, + WakeMagic = 0x200, + WakeMagicSecure = 0x400, + SecureHack = 0x100000, + WokePhy = 0x400000, + WokeUnicast = 0x800000, + WokeMulticast = 0x1000000, + WokeBroadcast = 0x2000000, + WokeArp = 0x4000000, + WokePMatch0 = 0x8000000, + WokePMatch1 = 0x10000000, + WokePMatch2 = 0x20000000, + WokePMatch3 = 0x40000000, + WokeMagic = 0x80000000, + WakeOptsSummary = 0x7ff +}; + +enum RxFilterAddr_bits { + RFCRAddressMask = 0x3ff, + AcceptMulticast = 0x00200000, + AcceptMyPhys = 0x08000000, + AcceptAllPhys = 0x10000000, + AcceptAllMulticast = 0x20000000, + AcceptBroadcast = 0x40000000, + RxFilterEnable = 0x80000000 +}; + +enum StatsCtrl_bits { + StatsWarn = 0x1, + StatsFreeze = 0x2, + StatsClear = 0x4, + StatsStrobe = 0x8, +}; + +enum MIntrCtrl_bits { + MICRIntEn = 0x2, +}; + +enum PhyCtrl_bits { + PhyAddrMask = 0x1f, +}; + +#define PHY_ADDR_NONE 32 +#define PHY_ADDR_INTERNAL 1 + +/* values we might find in the silicon revision register */ +#define SRR_DP83815_C 0x0302 +#define SRR_DP83815_D 0x0403 +#define SRR_DP83816_A4 0x0504 +#define SRR_DP83816_A5 0x0505 + +/* The Rx and Tx buffer descriptors. */ +/* Note that using only 32 bit fields simplifies conversion to big-endian + architectures. */ +struct netdev_desc { + __le32 next_desc; + __le32 cmd_status; + __le32 addr; + __le32 software_use; +}; + +/* Bits in network_desc.status */ +enum desc_status_bits { + DescOwn=0x80000000, DescMore=0x40000000, DescIntr=0x20000000, + DescNoCRC=0x10000000, DescPktOK=0x08000000, + DescSizeMask=0xfff, + + DescTxAbort=0x04000000, DescTxFIFO=0x02000000, + DescTxCarrier=0x01000000, DescTxDefer=0x00800000, + DescTxExcDefer=0x00400000, DescTxOOWCol=0x00200000, + DescTxExcColl=0x00100000, DescTxCollCount=0x000f0000, + + DescRxAbort=0x04000000, DescRxOver=0x02000000, + DescRxDest=0x01800000, DescRxLong=0x00400000, + DescRxRunt=0x00200000, DescRxInvalid=0x00100000, + DescRxCRC=0x00080000, DescRxAlign=0x00040000, + DescRxLoop=0x00020000, DesRxColl=0x00010000, +}; + +struct netdev_private { + /* Descriptor rings first for alignment */ + dma_addr_t ring_dma; + struct netdev_desc *rx_ring; + struct netdev_desc *tx_ring; + /* The addresses of receive-in-place skbuffs */ + struct sk_buff *rx_skbuff[RX_RING_SIZE]; + dma_addr_t rx_dma[RX_RING_SIZE]; + /* address of a sent-in-place packet/buffer, for later free() */ + struct sk_buff *tx_skbuff[TX_RING_SIZE]; + dma_addr_t tx_dma[TX_RING_SIZE]; + struct net_device *dev; + struct napi_struct napi; + /* Media monitoring timer */ + struct timer_list timer; + /* Frequently used values: keep some adjacent for cache effect */ + struct pci_dev *pci_dev; + struct netdev_desc *rx_head_desc; + /* Producer/consumer ring indices */ + unsigned int cur_rx, dirty_rx; + unsigned int cur_tx, dirty_tx; + /* Based on MTU+slack. */ + unsigned int rx_buf_sz; + int oom; + /* Interrupt status */ + u32 intr_status; + /* Do not touch the nic registers */ + int hands_off; + /* Don't pay attention to the reported link state. */ + int ignore_phy; + /* external phy that is used: only valid if dev->if_port != PORT_TP */ + int mii; + int phy_addr_external; + unsigned int full_duplex; + /* Rx filter */ + u32 cur_rx_mode; + u32 rx_filter[16]; + /* FIFO and PCI burst thresholds */ + u32 tx_config, rx_config; + /* original contents of ClkRun register */ + u32 SavedClkRun; + /* silicon revision */ + u32 srr; + /* expected DSPCFG value */ + u16 dspcfg; + int dspcfg_workaround; + /* parms saved in ethtool format */ + u16 speed; /* The forced speed, 10Mb, 100Mb, gigabit */ + u8 duplex; /* Duplex, half or full */ + u8 autoneg; /* Autonegotiation enabled */ + /* MII transceiver section */ + u16 advertising; + unsigned int iosize; + spinlock_t lock; + u32 msg_enable; + /* EEPROM data */ + int eeprom_size; +}; + +static void move_int_phy(struct net_device *dev, int addr); +static int eeprom_read(void __iomem *ioaddr, int location); +static int mdio_read(struct net_device *dev, int reg); +static void mdio_write(struct net_device *dev, int reg, u16 data); +static void init_phy_fixup(struct net_device *dev); +static int miiport_read(struct net_device *dev, int phy_id, int reg); +static void miiport_write(struct net_device *dev, int phy_id, int reg, u16 data); +static int find_mii(struct net_device *dev); +static void natsemi_reset(struct net_device *dev); +static void natsemi_reload_eeprom(struct net_device *dev); +static void natsemi_stop_rxtx(struct net_device *dev); +static int netdev_open(struct net_device *dev); +static void do_cable_magic(struct net_device *dev); +static void undo_cable_magic(struct net_device *dev); +static void check_link(struct net_device *dev); +static void netdev_timer(unsigned long data); +static void dump_ring(struct net_device *dev); +static void ns_tx_timeout(struct net_device *dev); +static int alloc_ring(struct net_device *dev); +static void refill_rx(struct net_device *dev); +static void init_ring(struct net_device *dev); +static void drain_tx(struct net_device *dev); +static void drain_ring(struct net_device *dev); +static void free_ring(struct net_device *dev); +static void reinit_ring(struct net_device *dev); +static void init_registers(struct net_device *dev); +static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev); +static irqreturn_t intr_handler(int irq, void *dev_instance); +static void netdev_error(struct net_device *dev, int intr_status); +static int natsemi_poll(struct napi_struct *napi, int budget); +static void netdev_rx(struct net_device *dev, int *work_done, int work_to_do); +static void netdev_tx_done(struct net_device *dev); +static int natsemi_change_mtu(struct net_device *dev, int new_mtu); +#ifdef CONFIG_NET_POLL_CONTROLLER +static void natsemi_poll_controller(struct net_device *dev); +#endif +static void __set_rx_mode(struct net_device *dev); +static void set_rx_mode(struct net_device *dev); +static void __get_stats(struct net_device *dev); +static struct net_device_stats *get_stats(struct net_device *dev); +static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); +static int netdev_set_wol(struct net_device *dev, u32 newval); +static int netdev_get_wol(struct net_device *dev, u32 *supported, u32 *cur); +static int netdev_set_sopass(struct net_device *dev, u8 *newval); +static int netdev_get_sopass(struct net_device *dev, u8 *data); +static int netdev_get_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd); +static int netdev_set_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd); +static void enable_wol_mode(struct net_device *dev, int enable_intr); +static int netdev_close(struct net_device *dev); +static int netdev_get_regs(struct net_device *dev, u8 *buf); +static int netdev_get_eeprom(struct net_device *dev, u8 *buf); +static const struct ethtool_ops ethtool_ops; + +#define NATSEMI_ATTR(_name) \ +static ssize_t natsemi_show_##_name(struct device *dev, \ + struct device_attribute *attr, char *buf); \ + static ssize_t natsemi_set_##_name(struct device *dev, \ + struct device_attribute *attr, \ + const char *buf, size_t count); \ + static DEVICE_ATTR(_name, 0644, natsemi_show_##_name, natsemi_set_##_name) + +#define NATSEMI_CREATE_FILE(_dev, _name) \ + device_create_file(&_dev->dev, &dev_attr_##_name) +#define NATSEMI_REMOVE_FILE(_dev, _name) \ + device_remove_file(&_dev->dev, &dev_attr_##_name) + +NATSEMI_ATTR(dspcfg_workaround); + +static ssize_t natsemi_show_dspcfg_workaround(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct netdev_private *np = netdev_priv(to_net_dev(dev)); + + return sprintf(buf, "%s\n", np->dspcfg_workaround ? "on" : "off"); +} + +static ssize_t natsemi_set_dspcfg_workaround(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct netdev_private *np = netdev_priv(to_net_dev(dev)); + int new_setting; + unsigned long flags; + + /* Find out the new setting */ + if (!strncmp("on", buf, count - 1) || !strncmp("1", buf, count - 1)) + new_setting = 1; + else if (!strncmp("off", buf, count - 1) || + !strncmp("0", buf, count - 1)) + new_setting = 0; + else + return count; + + spin_lock_irqsave(&np->lock, flags); + + np->dspcfg_workaround = new_setting; + + spin_unlock_irqrestore(&np->lock, flags); + + return count; +} + +static inline void __iomem *ns_ioaddr(struct net_device *dev) +{ + return (void __iomem *) dev->base_addr; +} + +static inline void natsemi_irq_enable(struct net_device *dev) +{ + writel(1, ns_ioaddr(dev) + IntrEnable); + readl(ns_ioaddr(dev) + IntrEnable); +} + +static inline void natsemi_irq_disable(struct net_device *dev) +{ + writel(0, ns_ioaddr(dev) + IntrEnable); + readl(ns_ioaddr(dev) + IntrEnable); +} + +static void move_int_phy(struct net_device *dev, int addr) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = ns_ioaddr(dev); + int target = 31; + + /* + * The internal phy is visible on the external mii bus. Therefore we must + * move it away before we can send commands to an external phy. + * There are two addresses we must avoid: + * - the address on the external phy that is used for transmission. + * - the address that we want to access. User space can access phys + * on the mii bus with SIOCGMIIREG/SIOCSMIIREG, independent from the + * phy that is used for transmission. + */ + + if (target == addr) + target--; + if (target == np->phy_addr_external) + target--; + writew(target, ioaddr + PhyCtrl); + readw(ioaddr + PhyCtrl); + udelay(1); +} + +static void __devinit natsemi_init_media (struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + u32 tmp; + + if (np->ignore_phy) + netif_carrier_on(dev); + else + netif_carrier_off(dev); + + /* get the initial settings from hardware */ + tmp = mdio_read(dev, MII_BMCR); + np->speed = (tmp & BMCR_SPEED100)? SPEED_100 : SPEED_10; + np->duplex = (tmp & BMCR_FULLDPLX)? DUPLEX_FULL : DUPLEX_HALF; + np->autoneg = (tmp & BMCR_ANENABLE)? AUTONEG_ENABLE: AUTONEG_DISABLE; + np->advertising= mdio_read(dev, MII_ADVERTISE); + + if ((np->advertising & ADVERTISE_ALL) != ADVERTISE_ALL && + netif_msg_probe(np)) { + printk(KERN_INFO "natsemi %s: Transceiver default autonegotiation %s " + "10%s %s duplex.\n", + pci_name(np->pci_dev), + (mdio_read(dev, MII_BMCR) & BMCR_ANENABLE)? + "enabled, advertise" : "disabled, force", + (np->advertising & + (ADVERTISE_100FULL|ADVERTISE_100HALF))? + "0" : "", + (np->advertising & + (ADVERTISE_100FULL|ADVERTISE_10FULL))? + "full" : "half"); + } + if (netif_msg_probe(np)) + printk(KERN_INFO + "natsemi %s: Transceiver status %#04x advertising %#04x.\n", + pci_name(np->pci_dev), mdio_read(dev, MII_BMSR), + np->advertising); + +} + +static const struct net_device_ops natsemi_netdev_ops = { + .ndo_open = netdev_open, + .ndo_stop = netdev_close, + .ndo_start_xmit = start_tx, + .ndo_get_stats = get_stats, + .ndo_set_multicast_list = set_rx_mode, + .ndo_change_mtu = natsemi_change_mtu, + .ndo_do_ioctl = netdev_ioctl, + .ndo_tx_timeout = ns_tx_timeout, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = natsemi_poll_controller, +#endif +}; + +static int __devinit natsemi_probe1 (struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct net_device *dev; + struct netdev_private *np; + int i, option, irq, chip_idx = ent->driver_data; + static int find_cnt = -1; + resource_size_t iostart; + unsigned long iosize; + void __iomem *ioaddr; + const int pcibar = 1; /* PCI base address register */ + int prev_eedata; + u32 tmp; + +/* when built into the kernel, we only print version if device is found */ +#ifndef MODULE + static int printed_version; + if (!printed_version++) + printk(version); +#endif + + i = pci_enable_device(pdev); + if (i) return i; + + /* natsemi has a non-standard PM control register + * in PCI config space. Some boards apparently need + * to be brought to D0 in this manner. + */ + pci_read_config_dword(pdev, PCIPM, &tmp); + if (tmp & PCI_PM_CTRL_STATE_MASK) { + /* D0 state, disable PME assertion */ + u32 newtmp = tmp & ~PCI_PM_CTRL_STATE_MASK; + pci_write_config_dword(pdev, PCIPM, newtmp); + } + + find_cnt++; + iostart = pci_resource_start(pdev, pcibar); + iosize = pci_resource_len(pdev, pcibar); + irq = pdev->irq; + + pci_set_master(pdev); + + dev = alloc_etherdev(sizeof (struct netdev_private)); + if (!dev) + return -ENOMEM; + SET_NETDEV_DEV(dev, &pdev->dev); + + i = pci_request_regions(pdev, DRV_NAME); + if (i) + goto err_pci_request_regions; + + ioaddr = ioremap(iostart, iosize); + if (!ioaddr) { + i = -ENOMEM; + goto err_ioremap; + } + + /* Work around the dropped serial bit. */ + prev_eedata = eeprom_read(ioaddr, 6); + for (i = 0; i < 3; i++) { + int eedata = eeprom_read(ioaddr, i + 7); + dev->dev_addr[i*2] = (eedata << 1) + (prev_eedata >> 15); + dev->dev_addr[i*2+1] = eedata >> 7; + prev_eedata = eedata; + } + + /* Store MAC Address in perm_addr */ + memcpy(dev->perm_addr, dev->dev_addr, ETH_ALEN); + + dev->base_addr = (unsigned long __force) ioaddr; + dev->irq = irq; + + np = netdev_priv(dev); + netif_napi_add(dev, &np->napi, natsemi_poll, 64); + np->dev = dev; + + np->pci_dev = pdev; + pci_set_drvdata(pdev, dev); + np->iosize = iosize; + spin_lock_init(&np->lock); + np->msg_enable = (debug >= 0) ? (1<hands_off = 0; + np->intr_status = 0; + np->eeprom_size = natsemi_pci_info[chip_idx].eeprom_size; + if (natsemi_pci_info[chip_idx].flags & NATSEMI_FLAG_IGNORE_PHY) + np->ignore_phy = 1; + else + np->ignore_phy = 0; + np->dspcfg_workaround = dspcfg_workaround; + + /* Initial port: + * - If configured to ignore the PHY set up for external. + * - If the nic was configured to use an external phy and if find_mii + * finds a phy: use external port, first phy that replies. + * - Otherwise: internal port. + * Note that the phy address for the internal phy doesn't matter: + * The address would be used to access a phy over the mii bus, but + * the internal phy is accessed through mapped registers. + */ + if (np->ignore_phy || readl(ioaddr + ChipConfig) & CfgExtPhy) + dev->if_port = PORT_MII; + else + dev->if_port = PORT_TP; + /* Reset the chip to erase previous misconfiguration. */ + natsemi_reload_eeprom(dev); + natsemi_reset(dev); + + if (dev->if_port != PORT_TP) { + np->phy_addr_external = find_mii(dev); + /* If we're ignoring the PHY it doesn't matter if we can't + * find one. */ + if (!np->ignore_phy && np->phy_addr_external == PHY_ADDR_NONE) { + dev->if_port = PORT_TP; + np->phy_addr_external = PHY_ADDR_INTERNAL; + } + } else { + np->phy_addr_external = PHY_ADDR_INTERNAL; + } + + option = find_cnt < MAX_UNITS ? options[find_cnt] : 0; + if (dev->mem_start) + option = dev->mem_start; + + /* The lower four bits are the media type. */ + if (option) { + if (option & 0x200) + np->full_duplex = 1; + if (option & 15) + printk(KERN_INFO + "natsemi %s: ignoring user supplied media type %d", + pci_name(np->pci_dev), option & 15); + } + if (find_cnt < MAX_UNITS && full_duplex[find_cnt]) + np->full_duplex = 1; + + dev->netdev_ops = &natsemi_netdev_ops; + dev->watchdog_timeo = TX_TIMEOUT; + + SET_ETHTOOL_OPS(dev, ðtool_ops); + + if (mtu) + dev->mtu = mtu; + + natsemi_init_media(dev); + + /* save the silicon revision for later querying */ + np->srr = readl(ioaddr + SiliconRev); + if (netif_msg_hw(np)) + printk(KERN_INFO "natsemi %s: silicon revision %#04x.\n", + pci_name(np->pci_dev), np->srr); + + i = register_netdev(dev); + if (i) + goto err_register_netdev; + + if (NATSEMI_CREATE_FILE(pdev, dspcfg_workaround)) + goto err_create_file; + + if (netif_msg_drv(np)) { + printk(KERN_INFO "natsemi %s: %s at %#08llx " + "(%s), %pM, IRQ %d", + dev->name, natsemi_pci_info[chip_idx].name, + (unsigned long long)iostart, pci_name(np->pci_dev), + dev->dev_addr, irq); + if (dev->if_port == PORT_TP) + printk(", port TP.\n"); + else if (np->ignore_phy) + printk(", port MII, ignoring PHY\n"); + else + printk(", port MII, phy ad %d.\n", np->phy_addr_external); + } + return 0; + + err_create_file: + unregister_netdev(dev); + + err_register_netdev: + iounmap(ioaddr); + + err_ioremap: + pci_release_regions(pdev); + pci_set_drvdata(pdev, NULL); + + err_pci_request_regions: + free_netdev(dev); + return i; +} + + +/* Read the EEPROM and MII Management Data I/O (MDIO) interfaces. + The EEPROM code is for the common 93c06/46 EEPROMs with 6 bit addresses. */ + +/* Delay between EEPROM clock transitions. + No extra delay is needed with 33Mhz PCI, but future 66Mhz access may need + a delay. Note that pre-2.0.34 kernels had a cache-alignment bug that + made udelay() unreliable. + The old method of using an ISA access as a delay, __SLOW_DOWN_IO__, is + deprecated. +*/ +#define eeprom_delay(ee_addr) readl(ee_addr) + +#define EE_Write0 (EE_ChipSelect) +#define EE_Write1 (EE_ChipSelect | EE_DataIn) + +/* The EEPROM commands include the alway-set leading bit. */ +enum EEPROM_Cmds { + EE_WriteCmd=(5 << 6), EE_ReadCmd=(6 << 6), EE_EraseCmd=(7 << 6), +}; + +static int eeprom_read(void __iomem *addr, int location) +{ + int i; + int retval = 0; + void __iomem *ee_addr = addr + EECtrl; + int read_cmd = location | EE_ReadCmd; + + writel(EE_Write0, ee_addr); + + /* Shift the read command bits out. */ + for (i = 10; i >= 0; i--) { + short dataval = (read_cmd & (1 << i)) ? EE_Write1 : EE_Write0; + writel(dataval, ee_addr); + eeprom_delay(ee_addr); + writel(dataval | EE_ShiftClk, ee_addr); + eeprom_delay(ee_addr); + } + writel(EE_ChipSelect, ee_addr); + eeprom_delay(ee_addr); + + for (i = 0; i < 16; i++) { + writel(EE_ChipSelect | EE_ShiftClk, ee_addr); + eeprom_delay(ee_addr); + retval |= (readl(ee_addr) & EE_DataOut) ? 1 << i : 0; + writel(EE_ChipSelect, ee_addr); + eeprom_delay(ee_addr); + } + + /* Terminate the EEPROM access. */ + writel(EE_Write0, ee_addr); + writel(0, ee_addr); + return retval; +} + +/* MII transceiver control section. + * The 83815 series has an internal transceiver, and we present the + * internal management registers as if they were MII connected. + * External Phy registers are referenced through the MII interface. + */ + +/* clock transitions >= 20ns (25MHz) + * One readl should be good to PCI @ 100MHz + */ +#define mii_delay(ioaddr) readl(ioaddr + EECtrl) + +static int mii_getbit (struct net_device *dev) +{ + int data; + void __iomem *ioaddr = ns_ioaddr(dev); + + writel(MII_ShiftClk, ioaddr + EECtrl); + data = readl(ioaddr + EECtrl); + writel(0, ioaddr + EECtrl); + mii_delay(ioaddr); + return (data & MII_Data)? 1 : 0; +} + +static void mii_send_bits (struct net_device *dev, u32 data, int len) +{ + u32 i; + void __iomem *ioaddr = ns_ioaddr(dev); + + for (i = (1 << (len-1)); i; i >>= 1) + { + u32 mdio_val = MII_Write | ((data & i)? MII_Data : 0); + writel(mdio_val, ioaddr + EECtrl); + mii_delay(ioaddr); + writel(mdio_val | MII_ShiftClk, ioaddr + EECtrl); + mii_delay(ioaddr); + } + writel(0, ioaddr + EECtrl); + mii_delay(ioaddr); +} + +static int miiport_read(struct net_device *dev, int phy_id, int reg) +{ + u32 cmd; + int i; + u32 retval = 0; + + /* Ensure sync */ + mii_send_bits (dev, 0xffffffff, 32); + /* ST(2), OP(2), ADDR(5), REG#(5), TA(2), Data(16) total 32 bits */ + /* ST,OP = 0110'b for read operation */ + cmd = (0x06 << 10) | (phy_id << 5) | reg; + mii_send_bits (dev, cmd, 14); + /* Turnaround */ + if (mii_getbit (dev)) + return 0; + /* Read data */ + for (i = 0; i < 16; i++) { + retval <<= 1; + retval |= mii_getbit (dev); + } + /* End cycle */ + mii_getbit (dev); + return retval; +} + +static void miiport_write(struct net_device *dev, int phy_id, int reg, u16 data) +{ + u32 cmd; + + /* Ensure sync */ + mii_send_bits (dev, 0xffffffff, 32); + /* ST(2), OP(2), ADDR(5), REG#(5), TA(2), Data(16) total 32 bits */ + /* ST,OP,AAAAA,RRRRR,TA = 0101xxxxxxxxxx10'b = 0x5002 for write */ + cmd = (0x5002 << 16) | (phy_id << 23) | (reg << 18) | data; + mii_send_bits (dev, cmd, 32); + /* End cycle */ + mii_getbit (dev); +} + +static int mdio_read(struct net_device *dev, int reg) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = ns_ioaddr(dev); + + /* The 83815 series has two ports: + * - an internal transceiver + * - an external mii bus + */ + if (dev->if_port == PORT_TP) + return readw(ioaddr+BasicControl+(reg<<2)); + else + return miiport_read(dev, np->phy_addr_external, reg); +} + +static void mdio_write(struct net_device *dev, int reg, u16 data) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = ns_ioaddr(dev); + + /* The 83815 series has an internal transceiver; handle separately */ + if (dev->if_port == PORT_TP) + writew(data, ioaddr+BasicControl+(reg<<2)); + else + miiport_write(dev, np->phy_addr_external, reg, data); +} + +static void init_phy_fixup(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = ns_ioaddr(dev); + int i; + u32 cfg; + u16 tmp; + + /* restore stuff lost when power was out */ + tmp = mdio_read(dev, MII_BMCR); + if (np->autoneg == AUTONEG_ENABLE) { + /* renegotiate if something changed */ + if ((tmp & BMCR_ANENABLE) == 0 || + np->advertising != mdio_read(dev, MII_ADVERTISE)) + { + /* turn on autonegotiation and force negotiation */ + tmp |= (BMCR_ANENABLE | BMCR_ANRESTART); + mdio_write(dev, MII_ADVERTISE, np->advertising); + } + } else { + /* turn off auto negotiation, set speed and duplexity */ + tmp &= ~(BMCR_ANENABLE | BMCR_SPEED100 | BMCR_FULLDPLX); + if (np->speed == SPEED_100) + tmp |= BMCR_SPEED100; + if (np->duplex == DUPLEX_FULL) + tmp |= BMCR_FULLDPLX; + /* + * Note: there is no good way to inform the link partner + * that our capabilities changed. The user has to unplug + * and replug the network cable after some changes, e.g. + * after switching from 10HD, autoneg off to 100 HD, + * autoneg off. + */ + } + mdio_write(dev, MII_BMCR, tmp); + readl(ioaddr + ChipConfig); + udelay(1); + + /* find out what phy this is */ + np->mii = (mdio_read(dev, MII_PHYSID1) << 16) + + mdio_read(dev, MII_PHYSID2); + + /* handle external phys here */ + switch (np->mii) { + case PHYID_AM79C874: + /* phy specific configuration for fibre/tp operation */ + tmp = mdio_read(dev, MII_MCTRL); + tmp &= ~(MII_FX_SEL | MII_EN_SCRM); + if (dev->if_port == PORT_FIBRE) + tmp |= MII_FX_SEL; + else + tmp |= MII_EN_SCRM; + mdio_write(dev, MII_MCTRL, tmp); + break; + default: + break; + } + cfg = readl(ioaddr + ChipConfig); + if (cfg & CfgExtPhy) + return; + + /* On page 78 of the spec, they recommend some settings for "optimum + performance" to be done in sequence. These settings optimize some + of the 100Mbit autodetection circuitry. They say we only want to + do this for rev C of the chip, but engineers at NSC (Bradley + Kennedy) recommends always setting them. If you don't, you get + errors on some autonegotiations that make the device unusable. + + It seems that the DSP needs a few usec to reinitialize after + the start of the phy. Just retry writing these values until they + stick. + */ + for (i=0;idspcfg = (np->srr <= SRR_DP83815_C)? + DSPCFG_VAL : (DSPCFG_COEF | readw(ioaddr + DSPCFG)); + writew(np->dspcfg, ioaddr + DSPCFG); + writew(SDCFG_VAL, ioaddr + SDCFG); + writew(0, ioaddr + PGSEL); + readl(ioaddr + ChipConfig); + udelay(10); + + writew(1, ioaddr + PGSEL); + dspcfg = readw(ioaddr + DSPCFG); + writew(0, ioaddr + PGSEL); + if (np->dspcfg == dspcfg) + break; + } + + if (netif_msg_link(np)) { + if (i==NATSEMI_HW_TIMEOUT) { + printk(KERN_INFO + "%s: DSPCFG mismatch after retrying for %d usec.\n", + dev->name, i*10); + } else { + printk(KERN_INFO + "%s: DSPCFG accepted after %d usec.\n", + dev->name, i*10); + } + } + /* + * Enable PHY Specific event based interrupts. Link state change + * and Auto-Negotiation Completion are among the affected. + * Read the intr status to clear it (needed for wake events). + */ + readw(ioaddr + MIntrStatus); + writew(MICRIntEn, ioaddr + MIntrCtrl); +} + +static int switch_port_external(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = ns_ioaddr(dev); + u32 cfg; + + cfg = readl(ioaddr + ChipConfig); + if (cfg & CfgExtPhy) + return 0; + + if (netif_msg_link(np)) { + printk(KERN_INFO "%s: switching to external transceiver.\n", + dev->name); + } + + /* 1) switch back to external phy */ + writel(cfg | (CfgExtPhy | CfgPhyDis), ioaddr + ChipConfig); + readl(ioaddr + ChipConfig); + udelay(1); + + /* 2) reset the external phy: */ + /* resetting the external PHY has been known to cause a hub supplying + * power over Ethernet to kill the power. We don't want to kill + * power to this computer, so we avoid resetting the phy. + */ + + /* 3) reinit the phy fixup, it got lost during power down. */ + move_int_phy(dev, np->phy_addr_external); + init_phy_fixup(dev); + + return 1; +} + +static int switch_port_internal(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = ns_ioaddr(dev); + int i; + u32 cfg; + u16 bmcr; + + cfg = readl(ioaddr + ChipConfig); + if (!(cfg &CfgExtPhy)) + return 0; + + if (netif_msg_link(np)) { + printk(KERN_INFO "%s: switching to internal transceiver.\n", + dev->name); + } + /* 1) switch back to internal phy: */ + cfg = cfg & ~(CfgExtPhy | CfgPhyDis); + writel(cfg, ioaddr + ChipConfig); + readl(ioaddr + ChipConfig); + udelay(1); + + /* 2) reset the internal phy: */ + bmcr = readw(ioaddr+BasicControl+(MII_BMCR<<2)); + writel(bmcr | BMCR_RESET, ioaddr+BasicControl+(MII_BMCR<<2)); + readl(ioaddr + ChipConfig); + udelay(10); + for (i=0;iname, i*10); + } + /* 3) reinit the phy fixup, it got lost during power down. */ + init_phy_fixup(dev); + + return 1; +} + +/* Scan for a PHY on the external mii bus. + * There are two tricky points: + * - Do not scan while the internal phy is enabled. The internal phy will + * crash: e.g. reads from the DSPCFG register will return odd values and + * the nasty random phy reset code will reset the nic every few seconds. + * - The internal phy must be moved around, an external phy could + * have the same address as the internal phy. + */ +static int find_mii(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + int tmp; + int i; + int did_switch; + + /* Switch to external phy */ + did_switch = switch_port_external(dev); + + /* Scan the possible phy addresses: + * + * PHY address 0 means that the phy is in isolate mode. Not yet + * supported due to lack of test hardware. User space should + * handle it through ethtool. + */ + for (i = 1; i <= 31; i++) { + move_int_phy(dev, i); + tmp = miiport_read(dev, i, MII_BMSR); + if (tmp != 0xffff && tmp != 0x0000) { + /* found something! */ + np->mii = (mdio_read(dev, MII_PHYSID1) << 16) + + mdio_read(dev, MII_PHYSID2); + if (netif_msg_probe(np)) { + printk(KERN_INFO "natsemi %s: found external phy %08x at address %d.\n", + pci_name(np->pci_dev), np->mii, i); + } + break; + } + } + /* And switch back to internal phy: */ + if (did_switch) + switch_port_internal(dev); + return i; +} + +/* CFG bits [13:16] [18:23] */ +#define CFG_RESET_SAVE 0xfde000 +/* WCSR bits [0:4] [9:10] */ +#define WCSR_RESET_SAVE 0x61f +/* RFCR bits [20] [22] [27:31] */ +#define RFCR_RESET_SAVE 0xf8500000 + +static void natsemi_reset(struct net_device *dev) +{ + int i; + u32 cfg; + u32 wcsr; + u32 rfcr; + u16 pmatch[3]; + u16 sopass[3]; + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = ns_ioaddr(dev); + + /* + * Resetting the chip causes some registers to be lost. + * Natsemi suggests NOT reloading the EEPROM while live, so instead + * we save the state that would have been loaded from EEPROM + * on a normal power-up (see the spec EEPROM map). This assumes + * whoever calls this will follow up with init_registers() eventually. + */ + + /* CFG */ + cfg = readl(ioaddr + ChipConfig) & CFG_RESET_SAVE; + /* WCSR */ + wcsr = readl(ioaddr + WOLCmd) & WCSR_RESET_SAVE; + /* RFCR */ + rfcr = readl(ioaddr + RxFilterAddr) & RFCR_RESET_SAVE; + /* PMATCH */ + for (i = 0; i < 3; i++) { + writel(i*2, ioaddr + RxFilterAddr); + pmatch[i] = readw(ioaddr + RxFilterData); + } + /* SOPAS */ + for (i = 0; i < 3; i++) { + writel(0xa+(i*2), ioaddr + RxFilterAddr); + sopass[i] = readw(ioaddr + RxFilterData); + } + + /* now whack the chip */ + writel(ChipReset, ioaddr + ChipCmd); + for (i=0;iname, i*5); + } else if (netif_msg_hw(np)) { + printk(KERN_DEBUG "%s: reset completed in %d usec.\n", + dev->name, i*5); + } + + /* restore CFG */ + cfg |= readl(ioaddr + ChipConfig) & ~CFG_RESET_SAVE; + /* turn on external phy if it was selected */ + if (dev->if_port == PORT_TP) + cfg &= ~(CfgExtPhy | CfgPhyDis); + else + cfg |= (CfgExtPhy | CfgPhyDis); + writel(cfg, ioaddr + ChipConfig); + /* restore WCSR */ + wcsr |= readl(ioaddr + WOLCmd) & ~WCSR_RESET_SAVE; + writel(wcsr, ioaddr + WOLCmd); + /* read RFCR */ + rfcr |= readl(ioaddr + RxFilterAddr) & ~RFCR_RESET_SAVE; + /* restore PMATCH */ + for (i = 0; i < 3; i++) { + writel(i*2, ioaddr + RxFilterAddr); + writew(pmatch[i], ioaddr + RxFilterData); + } + for (i = 0; i < 3; i++) { + writel(0xa+(i*2), ioaddr + RxFilterAddr); + writew(sopass[i], ioaddr + RxFilterData); + } + /* restore RFCR */ + writel(rfcr, ioaddr + RxFilterAddr); +} + +static void reset_rx(struct net_device *dev) +{ + int i; + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = ns_ioaddr(dev); + + np->intr_status &= ~RxResetDone; + + writel(RxReset, ioaddr + ChipCmd); + + for (i=0;iintr_status |= readl(ioaddr + IntrStatus); + if (np->intr_status & RxResetDone) + break; + udelay(15); + } + if (i==NATSEMI_HW_TIMEOUT) { + printk(KERN_WARNING "%s: RX reset did not complete in %d usec.\n", + dev->name, i*15); + } else if (netif_msg_hw(np)) { + printk(KERN_WARNING "%s: RX reset took %d usec.\n", + dev->name, i*15); + } +} + +static void natsemi_reload_eeprom(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = ns_ioaddr(dev); + int i; + + writel(EepromReload, ioaddr + PCIBusCfg); + for (i=0;ipci_dev), i*50); + } else if (netif_msg_hw(np)) { + printk(KERN_DEBUG "natsemi %s: EEPROM reloaded in %d usec.\n", + pci_name(np->pci_dev), i*50); + } +} + +static void natsemi_stop_rxtx(struct net_device *dev) +{ + void __iomem * ioaddr = ns_ioaddr(dev); + struct netdev_private *np = netdev_priv(dev); + int i; + + writel(RxOff | TxOff, ioaddr + ChipCmd); + for(i=0;i< NATSEMI_HW_TIMEOUT;i++) { + if ((readl(ioaddr + ChipCmd) & (TxOn|RxOn)) == 0) + break; + udelay(5); + } + if (i==NATSEMI_HW_TIMEOUT) { + printk(KERN_WARNING "%s: Tx/Rx process did not stop in %d usec.\n", + dev->name, i*5); + } else if (netif_msg_hw(np)) { + printk(KERN_DEBUG "%s: Tx/Rx process stopped in %d usec.\n", + dev->name, i*5); + } +} + +static int netdev_open(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem * ioaddr = ns_ioaddr(dev); + int i; + + /* Reset the chip, just in case. */ + natsemi_reset(dev); + + i = request_irq(dev->irq, intr_handler, IRQF_SHARED, dev->name, dev); + if (i) return i; + + if (netif_msg_ifup(np)) + printk(KERN_DEBUG "%s: netdev_open() irq %d.\n", + dev->name, dev->irq); + i = alloc_ring(dev); + if (i < 0) { + free_irq(dev->irq, dev); + return i; + } + napi_enable(&np->napi); + + init_ring(dev); + spin_lock_irq(&np->lock); + init_registers(dev); + /* now set the MAC address according to dev->dev_addr */ + for (i = 0; i < 3; i++) { + u16 mac = (dev->dev_addr[2*i+1]<<8) + dev->dev_addr[2*i]; + + writel(i*2, ioaddr + RxFilterAddr); + writew(mac, ioaddr + RxFilterData); + } + writel(np->cur_rx_mode, ioaddr + RxFilterAddr); + spin_unlock_irq(&np->lock); + + netif_start_queue(dev); + + if (netif_msg_ifup(np)) + printk(KERN_DEBUG "%s: Done netdev_open(), status: %#08x.\n", + dev->name, (int)readl(ioaddr + ChipCmd)); + + /* Set the timer to check for link beat. */ + init_timer(&np->timer); + np->timer.expires = round_jiffies(jiffies + NATSEMI_TIMER_FREQ); + np->timer.data = (unsigned long)dev; + np->timer.function = netdev_timer; /* timer handler */ + add_timer(&np->timer); + + return 0; +} + +static void do_cable_magic(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = ns_ioaddr(dev); + + if (dev->if_port != PORT_TP) + return; + + if (np->srr >= SRR_DP83816_A5) + return; + + /* + * 100 MBit links with short cables can trip an issue with the chip. + * The problem manifests as lots of CRC errors and/or flickering + * activity LED while idle. This process is based on instructions + * from engineers at National. + */ + if (readl(ioaddr + ChipConfig) & CfgSpeed100) { + u16 data; + + writew(1, ioaddr + PGSEL); + /* + * coefficient visibility should already be enabled via + * DSPCFG | 0x1000 + */ + data = readw(ioaddr + TSTDAT) & 0xff; + /* + * the value must be negative, and within certain values + * (these values all come from National) + */ + if (!(data & 0x80) || ((data >= 0xd8) && (data <= 0xff))) { + np = netdev_priv(dev); + + /* the bug has been triggered - fix the coefficient */ + writew(TSTDAT_FIXED, ioaddr + TSTDAT); + /* lock the value */ + data = readw(ioaddr + DSPCFG); + np->dspcfg = data | DSPCFG_LOCK; + writew(np->dspcfg, ioaddr + DSPCFG); + } + writew(0, ioaddr + PGSEL); + } +} + +static void undo_cable_magic(struct net_device *dev) +{ + u16 data; + struct netdev_private *np = netdev_priv(dev); + void __iomem * ioaddr = ns_ioaddr(dev); + + if (dev->if_port != PORT_TP) + return; + + if (np->srr >= SRR_DP83816_A5) + return; + + writew(1, ioaddr + PGSEL); + /* make sure the lock bit is clear */ + data = readw(ioaddr + DSPCFG); + np->dspcfg = data & ~DSPCFG_LOCK; + writew(np->dspcfg, ioaddr + DSPCFG); + writew(0, ioaddr + PGSEL); +} + +static void check_link(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem * ioaddr = ns_ioaddr(dev); + int duplex = np->duplex; + u16 bmsr; + + /* If we are ignoring the PHY then don't try reading it. */ + if (np->ignore_phy) + goto propagate_state; + + /* The link status field is latched: it remains low after a temporary + * link failure until it's read. We need the current link status, + * thus read twice. + */ + mdio_read(dev, MII_BMSR); + bmsr = mdio_read(dev, MII_BMSR); + + if (!(bmsr & BMSR_LSTATUS)) { + if (netif_carrier_ok(dev)) { + if (netif_msg_link(np)) + printk(KERN_NOTICE "%s: link down.\n", + dev->name); + netif_carrier_off(dev); + undo_cable_magic(dev); + } + return; + } + if (!netif_carrier_ok(dev)) { + if (netif_msg_link(np)) + printk(KERN_NOTICE "%s: link up.\n", dev->name); + netif_carrier_on(dev); + do_cable_magic(dev); + } + + duplex = np->full_duplex; + if (!duplex) { + if (bmsr & BMSR_ANEGCOMPLETE) { + int tmp = mii_nway_result( + np->advertising & mdio_read(dev, MII_LPA)); + if (tmp == LPA_100FULL || tmp == LPA_10FULL) + duplex = 1; + } else if (mdio_read(dev, MII_BMCR) & BMCR_FULLDPLX) + duplex = 1; + } + +propagate_state: + /* if duplex is set then bit 28 must be set, too */ + if (duplex ^ !!(np->rx_config & RxAcceptTx)) { + if (netif_msg_link(np)) + printk(KERN_INFO + "%s: Setting %s-duplex based on negotiated " + "link capability.\n", dev->name, + duplex ? "full" : "half"); + if (duplex) { + np->rx_config |= RxAcceptTx; + np->tx_config |= TxCarrierIgn | TxHeartIgn; + } else { + np->rx_config &= ~RxAcceptTx; + np->tx_config &= ~(TxCarrierIgn | TxHeartIgn); + } + writel(np->tx_config, ioaddr + TxConfig); + writel(np->rx_config, ioaddr + RxConfig); + } +} + +static void init_registers(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem * ioaddr = ns_ioaddr(dev); + + init_phy_fixup(dev); + + /* clear any interrupts that are pending, such as wake events */ + readl(ioaddr + IntrStatus); + + writel(np->ring_dma, ioaddr + RxRingPtr); + writel(np->ring_dma + RX_RING_SIZE * sizeof(struct netdev_desc), + ioaddr + TxRingPtr); + + /* Initialize other registers. + * Configure the PCI bus bursts and FIFO thresholds. + * Configure for standard, in-spec Ethernet. + * Start with half-duplex. check_link will update + * to the correct settings. + */ + + /* DRTH: 2: start tx if 64 bytes are in the fifo + * FLTH: 0x10: refill with next packet if 512 bytes are free + * MXDMA: 0: up to 256 byte bursts. + * MXDMA must be <= FLTH + * ECRETRY=1 + * ATP=1 + */ + np->tx_config = TxAutoPad | TxCollRetry | TxMxdma_256 | + TX_FLTH_VAL | TX_DRTH_VAL_START; + writel(np->tx_config, ioaddr + TxConfig); + + /* DRTH 0x10: start copying to memory if 128 bytes are in the fifo + * MXDMA 0: up to 256 byte bursts + */ + np->rx_config = RxMxdma_256 | RX_DRTH_VAL; + /* if receive ring now has bigger buffers than normal, enable jumbo */ + if (np->rx_buf_sz > NATSEMI_LONGPKT) + np->rx_config |= RxAcceptLong; + + writel(np->rx_config, ioaddr + RxConfig); + + /* Disable PME: + * The PME bit is initialized from the EEPROM contents. + * PCI cards probably have PME disabled, but motherboard + * implementations may have PME set to enable WakeOnLan. + * With PME set the chip will scan incoming packets but + * nothing will be written to memory. */ + np->SavedClkRun = readl(ioaddr + ClkRun); + writel(np->SavedClkRun & ~PMEEnable, ioaddr + ClkRun); + if (np->SavedClkRun & PMEStatus && netif_msg_wol(np)) { + printk(KERN_NOTICE "%s: Wake-up event %#08x\n", + dev->name, readl(ioaddr + WOLCmd)); + } + + check_link(dev); + __set_rx_mode(dev); + + /* Enable interrupts by setting the interrupt mask. */ + writel(DEFAULT_INTR, ioaddr + IntrMask); + natsemi_irq_enable(dev); + + writel(RxOn | TxOn, ioaddr + ChipCmd); + writel(StatsClear, ioaddr + StatsCtrl); /* Clear Stats */ +} + +/* + * netdev_timer: + * Purpose: + * 1) check for link changes. Usually they are handled by the MII interrupt + * but it doesn't hurt to check twice. + * 2) check for sudden death of the NIC: + * It seems that a reference set for this chip went out with incorrect info, + * and there exist boards that aren't quite right. An unexpected voltage + * drop can cause the PHY to get itself in a weird state (basically reset). + * NOTE: this only seems to affect revC chips. The user can disable + * this check via dspcfg_workaround sysfs option. + * 3) check of death of the RX path due to OOM + */ +static void netdev_timer(unsigned long data) +{ + struct net_device *dev = (struct net_device *)data; + struct netdev_private *np = netdev_priv(dev); + void __iomem * ioaddr = ns_ioaddr(dev); + int next_tick = NATSEMI_TIMER_FREQ; + + if (netif_msg_timer(np)) { + /* DO NOT read the IntrStatus register, + * a read clears any pending interrupts. + */ + printk(KERN_DEBUG "%s: Media selection timer tick.\n", + dev->name); + } + + if (dev->if_port == PORT_TP) { + u16 dspcfg; + + spin_lock_irq(&np->lock); + /* check for a nasty random phy-reset - use dspcfg as a flag */ + writew(1, ioaddr+PGSEL); + dspcfg = readw(ioaddr+DSPCFG); + writew(0, ioaddr+PGSEL); + if (np->dspcfg_workaround && dspcfg != np->dspcfg) { + if (!netif_queue_stopped(dev)) { + spin_unlock_irq(&np->lock); + if (netif_msg_drv(np)) + printk(KERN_NOTICE "%s: possible phy reset: " + "re-initializing\n", dev->name); + disable_irq(dev->irq); + spin_lock_irq(&np->lock); + natsemi_stop_rxtx(dev); + dump_ring(dev); + reinit_ring(dev); + init_registers(dev); + spin_unlock_irq(&np->lock); + enable_irq(dev->irq); + } else { + /* hurry back */ + next_tick = HZ; + spin_unlock_irq(&np->lock); + } + } else { + /* init_registers() calls check_link() for the above case */ + check_link(dev); + spin_unlock_irq(&np->lock); + } + } else { + spin_lock_irq(&np->lock); + check_link(dev); + spin_unlock_irq(&np->lock); + } + if (np->oom) { + disable_irq(dev->irq); + np->oom = 0; + refill_rx(dev); + enable_irq(dev->irq); + if (!np->oom) { + writel(RxOn, ioaddr + ChipCmd); + } else { + next_tick = 1; + } + } + + if (next_tick > 1) + mod_timer(&np->timer, round_jiffies(jiffies + next_tick)); + else + mod_timer(&np->timer, jiffies + next_tick); +} + +static void dump_ring(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + + if (netif_msg_pktdata(np)) { + int i; + printk(KERN_DEBUG " Tx ring at %p:\n", np->tx_ring); + for (i = 0; i < TX_RING_SIZE; i++) { + printk(KERN_DEBUG " #%d desc. %#08x %#08x %#08x.\n", + i, np->tx_ring[i].next_desc, + np->tx_ring[i].cmd_status, + np->tx_ring[i].addr); + } + printk(KERN_DEBUG " Rx ring %p:\n", np->rx_ring); + for (i = 0; i < RX_RING_SIZE; i++) { + printk(KERN_DEBUG " #%d desc. %#08x %#08x %#08x.\n", + i, np->rx_ring[i].next_desc, + np->rx_ring[i].cmd_status, + np->rx_ring[i].addr); + } + } +} + +static void ns_tx_timeout(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem * ioaddr = ns_ioaddr(dev); + + disable_irq(dev->irq); + spin_lock_irq(&np->lock); + if (!np->hands_off) { + if (netif_msg_tx_err(np)) + printk(KERN_WARNING + "%s: Transmit timed out, status %#08x," + " resetting...\n", + dev->name, readl(ioaddr + IntrStatus)); + dump_ring(dev); + + natsemi_reset(dev); + reinit_ring(dev); + init_registers(dev); + } else { + printk(KERN_WARNING + "%s: tx_timeout while in hands_off state?\n", + dev->name); + } + spin_unlock_irq(&np->lock); + enable_irq(dev->irq); + + dev->trans_start = jiffies; /* prevent tx timeout */ + dev->stats.tx_errors++; + netif_wake_queue(dev); +} + +static int alloc_ring(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + np->rx_ring = pci_alloc_consistent(np->pci_dev, + sizeof(struct netdev_desc) * (RX_RING_SIZE+TX_RING_SIZE), + &np->ring_dma); + if (!np->rx_ring) + return -ENOMEM; + np->tx_ring = &np->rx_ring[RX_RING_SIZE]; + return 0; +} + +static void refill_rx(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + + /* Refill the Rx ring buffers. */ + for (; np->cur_rx - np->dirty_rx > 0; np->dirty_rx++) { + struct sk_buff *skb; + int entry = np->dirty_rx % RX_RING_SIZE; + if (np->rx_skbuff[entry] == NULL) { + unsigned int buflen = np->rx_buf_sz+NATSEMI_PADDING; + skb = dev_alloc_skb(buflen); + np->rx_skbuff[entry] = skb; + if (skb == NULL) + break; /* Better luck next round. */ + skb->dev = dev; /* Mark as being used by this device. */ + np->rx_dma[entry] = pci_map_single(np->pci_dev, + skb->data, buflen, PCI_DMA_FROMDEVICE); + np->rx_ring[entry].addr = cpu_to_le32(np->rx_dma[entry]); + } + np->rx_ring[entry].cmd_status = cpu_to_le32(np->rx_buf_sz); + } + if (np->cur_rx - np->dirty_rx == RX_RING_SIZE) { + if (netif_msg_rx_err(np)) + printk(KERN_WARNING "%s: going OOM.\n", dev->name); + np->oom = 1; + } +} + +static void set_bufsize(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + if (dev->mtu <= ETH_DATA_LEN) + np->rx_buf_sz = ETH_DATA_LEN + NATSEMI_HEADERS; + else + np->rx_buf_sz = dev->mtu + NATSEMI_HEADERS; +} + +/* Initialize the Rx and Tx rings, along with various 'dev' bits. */ +static void init_ring(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + int i; + + /* 1) TX ring */ + np->dirty_tx = np->cur_tx = 0; + for (i = 0; i < TX_RING_SIZE; i++) { + np->tx_skbuff[i] = NULL; + np->tx_ring[i].next_desc = cpu_to_le32(np->ring_dma + +sizeof(struct netdev_desc) + *((i+1)%TX_RING_SIZE+RX_RING_SIZE)); + np->tx_ring[i].cmd_status = 0; + } + + /* 2) RX ring */ + np->dirty_rx = 0; + np->cur_rx = RX_RING_SIZE; + np->oom = 0; + set_bufsize(dev); + + np->rx_head_desc = &np->rx_ring[0]; + + /* Please be careful before changing this loop - at least gcc-2.95.1 + * miscompiles it otherwise. + */ + /* Initialize all Rx descriptors. */ + for (i = 0; i < RX_RING_SIZE; i++) { + np->rx_ring[i].next_desc = cpu_to_le32(np->ring_dma + +sizeof(struct netdev_desc) + *((i+1)%RX_RING_SIZE)); + np->rx_ring[i].cmd_status = cpu_to_le32(DescOwn); + np->rx_skbuff[i] = NULL; + } + refill_rx(dev); + dump_ring(dev); +} + +static void drain_tx(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + int i; + + for (i = 0; i < TX_RING_SIZE; i++) { + if (np->tx_skbuff[i]) { + pci_unmap_single(np->pci_dev, + np->tx_dma[i], np->tx_skbuff[i]->len, + PCI_DMA_TODEVICE); + dev_kfree_skb(np->tx_skbuff[i]); + dev->stats.tx_dropped++; + } + np->tx_skbuff[i] = NULL; + } +} + +static void drain_rx(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + unsigned int buflen = np->rx_buf_sz; + int i; + + /* Free all the skbuffs in the Rx queue. */ + for (i = 0; i < RX_RING_SIZE; i++) { + np->rx_ring[i].cmd_status = 0; + np->rx_ring[i].addr = cpu_to_le32(0xBADF00D0); /* An invalid address. */ + if (np->rx_skbuff[i]) { + pci_unmap_single(np->pci_dev, np->rx_dma[i], + buflen + NATSEMI_PADDING, + PCI_DMA_FROMDEVICE); + dev_kfree_skb(np->rx_skbuff[i]); + } + np->rx_skbuff[i] = NULL; + } +} + +static void drain_ring(struct net_device *dev) +{ + drain_rx(dev); + drain_tx(dev); +} + +static void free_ring(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + pci_free_consistent(np->pci_dev, + sizeof(struct netdev_desc) * (RX_RING_SIZE+TX_RING_SIZE), + np->rx_ring, np->ring_dma); +} + +static void reinit_rx(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + int i; + + /* RX Ring */ + np->dirty_rx = 0; + np->cur_rx = RX_RING_SIZE; + np->rx_head_desc = &np->rx_ring[0]; + /* Initialize all Rx descriptors. */ + for (i = 0; i < RX_RING_SIZE; i++) + np->rx_ring[i].cmd_status = cpu_to_le32(DescOwn); + + refill_rx(dev); +} + +static void reinit_ring(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + int i; + + /* drain TX ring */ + drain_tx(dev); + np->dirty_tx = np->cur_tx = 0; + for (i=0;itx_ring[i].cmd_status = 0; + + reinit_rx(dev); +} + +static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem * ioaddr = ns_ioaddr(dev); + unsigned entry; + unsigned long flags; + + /* Note: Ordering is important here, set the field with the + "ownership" bit last, and only then increment cur_tx. */ + + /* Calculate the next Tx descriptor entry. */ + entry = np->cur_tx % TX_RING_SIZE; + + np->tx_skbuff[entry] = skb; + np->tx_dma[entry] = pci_map_single(np->pci_dev, + skb->data,skb->len, PCI_DMA_TODEVICE); + + np->tx_ring[entry].addr = cpu_to_le32(np->tx_dma[entry]); + + spin_lock_irqsave(&np->lock, flags); + + if (!np->hands_off) { + np->tx_ring[entry].cmd_status = cpu_to_le32(DescOwn | skb->len); + /* StrongARM: Explicitly cache flush np->tx_ring and + * skb->data,skb->len. */ + wmb(); + np->cur_tx++; + if (np->cur_tx - np->dirty_tx >= TX_QUEUE_LEN - 1) { + netdev_tx_done(dev); + if (np->cur_tx - np->dirty_tx >= TX_QUEUE_LEN - 1) + netif_stop_queue(dev); + } + /* Wake the potentially-idle transmit channel. */ + writel(TxOn, ioaddr + ChipCmd); + } else { + dev_kfree_skb_irq(skb); + dev->stats.tx_dropped++; + } + spin_unlock_irqrestore(&np->lock, flags); + + if (netif_msg_tx_queued(np)) { + printk(KERN_DEBUG "%s: Transmit frame #%d queued in slot %d.\n", + dev->name, np->cur_tx, entry); + } + return NETDEV_TX_OK; +} + +static void netdev_tx_done(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + + for (; np->cur_tx - np->dirty_tx > 0; np->dirty_tx++) { + int entry = np->dirty_tx % TX_RING_SIZE; + if (np->tx_ring[entry].cmd_status & cpu_to_le32(DescOwn)) + break; + if (netif_msg_tx_done(np)) + printk(KERN_DEBUG + "%s: tx frame #%d finished, status %#08x.\n", + dev->name, np->dirty_tx, + le32_to_cpu(np->tx_ring[entry].cmd_status)); + if (np->tx_ring[entry].cmd_status & cpu_to_le32(DescPktOK)) { + dev->stats.tx_packets++; + dev->stats.tx_bytes += np->tx_skbuff[entry]->len; + } else { /* Various Tx errors */ + int tx_status = + le32_to_cpu(np->tx_ring[entry].cmd_status); + if (tx_status & (DescTxAbort|DescTxExcColl)) + dev->stats.tx_aborted_errors++; + if (tx_status & DescTxFIFO) + dev->stats.tx_fifo_errors++; + if (tx_status & DescTxCarrier) + dev->stats.tx_carrier_errors++; + if (tx_status & DescTxOOWCol) + dev->stats.tx_window_errors++; + dev->stats.tx_errors++; + } + pci_unmap_single(np->pci_dev,np->tx_dma[entry], + np->tx_skbuff[entry]->len, + PCI_DMA_TODEVICE); + /* Free the original skb. */ + dev_kfree_skb_irq(np->tx_skbuff[entry]); + np->tx_skbuff[entry] = NULL; + } + if (netif_queue_stopped(dev) && + np->cur_tx - np->dirty_tx < TX_QUEUE_LEN - 4) { + /* The ring is no longer full, wake queue. */ + netif_wake_queue(dev); + } +} + +/* The interrupt handler doesn't actually handle interrupts itself, it + * schedules a NAPI poll if there is anything to do. */ +static irqreturn_t intr_handler(int irq, void *dev_instance) +{ + struct net_device *dev = dev_instance; + struct netdev_private *np = netdev_priv(dev); + void __iomem * ioaddr = ns_ioaddr(dev); + + /* Reading IntrStatus automatically acknowledges so don't do + * that while interrupts are disabled, (for example, while a + * poll is scheduled). */ + if (np->hands_off || !readl(ioaddr + IntrEnable)) + return IRQ_NONE; + + np->intr_status = readl(ioaddr + IntrStatus); + + if (!np->intr_status) + return IRQ_NONE; + + if (netif_msg_intr(np)) + printk(KERN_DEBUG + "%s: Interrupt, status %#08x, mask %#08x.\n", + dev->name, np->intr_status, + readl(ioaddr + IntrMask)); + + prefetch(&np->rx_skbuff[np->cur_rx % RX_RING_SIZE]); + + if (napi_schedule_prep(&np->napi)) { + /* Disable interrupts and register for poll */ + natsemi_irq_disable(dev); + __napi_schedule(&np->napi); + } else + printk(KERN_WARNING + "%s: Ignoring interrupt, status %#08x, mask %#08x.\n", + dev->name, np->intr_status, + readl(ioaddr + IntrMask)); + + return IRQ_HANDLED; +} + +/* This is the NAPI poll routine. As well as the standard RX handling + * it also handles all other interrupts that the chip might raise. + */ +static int natsemi_poll(struct napi_struct *napi, int budget) +{ + struct netdev_private *np = container_of(napi, struct netdev_private, napi); + struct net_device *dev = np->dev; + void __iomem * ioaddr = ns_ioaddr(dev); + int work_done = 0; + + do { + if (netif_msg_intr(np)) + printk(KERN_DEBUG + "%s: Poll, status %#08x, mask %#08x.\n", + dev->name, np->intr_status, + readl(ioaddr + IntrMask)); + + /* netdev_rx() may read IntrStatus again if the RX state + * machine falls over so do it first. */ + if (np->intr_status & + (IntrRxDone | IntrRxIntr | RxStatusFIFOOver | + IntrRxErr | IntrRxOverrun)) { + netdev_rx(dev, &work_done, budget); + } + + if (np->intr_status & + (IntrTxDone | IntrTxIntr | IntrTxIdle | IntrTxErr)) { + spin_lock(&np->lock); + netdev_tx_done(dev); + spin_unlock(&np->lock); + } + + /* Abnormal error summary/uncommon events handlers. */ + if (np->intr_status & IntrAbnormalSummary) + netdev_error(dev, np->intr_status); + + if (work_done >= budget) + return work_done; + + np->intr_status = readl(ioaddr + IntrStatus); + } while (np->intr_status); + + napi_complete(napi); + + /* Reenable interrupts providing nothing is trying to shut + * the chip down. */ + spin_lock(&np->lock); + if (!np->hands_off) + natsemi_irq_enable(dev); + spin_unlock(&np->lock); + + return work_done; +} + +/* This routine is logically part of the interrupt handler, but separated + for clarity and better register allocation. */ +static void netdev_rx(struct net_device *dev, int *work_done, int work_to_do) +{ + struct netdev_private *np = netdev_priv(dev); + int entry = np->cur_rx % RX_RING_SIZE; + int boguscnt = np->dirty_rx + RX_RING_SIZE - np->cur_rx; + s32 desc_status = le32_to_cpu(np->rx_head_desc->cmd_status); + unsigned int buflen = np->rx_buf_sz; + void __iomem * ioaddr = ns_ioaddr(dev); + + /* If the driver owns the next entry it's a new packet. Send it up. */ + while (desc_status < 0) { /* e.g. & DescOwn */ + int pkt_len; + if (netif_msg_rx_status(np)) + printk(KERN_DEBUG + " netdev_rx() entry %d status was %#08x.\n", + entry, desc_status); + if (--boguscnt < 0) + break; + + if (*work_done >= work_to_do) + break; + + (*work_done)++; + + pkt_len = (desc_status & DescSizeMask) - 4; + if ((desc_status&(DescMore|DescPktOK|DescRxLong)) != DescPktOK){ + if (desc_status & DescMore) { + unsigned long flags; + + if (netif_msg_rx_err(np)) + printk(KERN_WARNING + "%s: Oversized(?) Ethernet " + "frame spanned multiple " + "buffers, entry %#08x " + "status %#08x.\n", dev->name, + np->cur_rx, desc_status); + dev->stats.rx_length_errors++; + + /* The RX state machine has probably + * locked up beneath us. Follow the + * reset procedure documented in + * AN-1287. */ + + spin_lock_irqsave(&np->lock, flags); + reset_rx(dev); + reinit_rx(dev); + writel(np->ring_dma, ioaddr + RxRingPtr); + check_link(dev); + spin_unlock_irqrestore(&np->lock, flags); + + /* We'll enable RX on exit from this + * function. */ + break; + + } else { + /* There was an error. */ + dev->stats.rx_errors++; + if (desc_status & (DescRxAbort|DescRxOver)) + dev->stats.rx_over_errors++; + if (desc_status & (DescRxLong|DescRxRunt)) + dev->stats.rx_length_errors++; + if (desc_status & (DescRxInvalid|DescRxAlign)) + dev->stats.rx_frame_errors++; + if (desc_status & DescRxCRC) + dev->stats.rx_crc_errors++; + } + } else if (pkt_len > np->rx_buf_sz) { + /* if this is the tail of a double buffer + * packet, we've already counted the error + * on the first part. Ignore the second half. + */ + } else { + struct sk_buff *skb; + /* Omit CRC size. */ + /* Check if the packet is long enough to accept + * without copying to a minimally-sized skbuff. */ + if (pkt_len < rx_copybreak && + (skb = dev_alloc_skb(pkt_len + RX_OFFSET)) != NULL) { + /* 16 byte align the IP header */ + skb_reserve(skb, RX_OFFSET); + pci_dma_sync_single_for_cpu(np->pci_dev, + np->rx_dma[entry], + buflen, + PCI_DMA_FROMDEVICE); + skb_copy_to_linear_data(skb, + np->rx_skbuff[entry]->data, pkt_len); + skb_put(skb, pkt_len); + pci_dma_sync_single_for_device(np->pci_dev, + np->rx_dma[entry], + buflen, + PCI_DMA_FROMDEVICE); + } else { + pci_unmap_single(np->pci_dev, np->rx_dma[entry], + buflen + NATSEMI_PADDING, + PCI_DMA_FROMDEVICE); + skb_put(skb = np->rx_skbuff[entry], pkt_len); + np->rx_skbuff[entry] = NULL; + } + skb->protocol = eth_type_trans(skb, dev); + netif_receive_skb(skb); + dev->stats.rx_packets++; + dev->stats.rx_bytes += pkt_len; + } + entry = (++np->cur_rx) % RX_RING_SIZE; + np->rx_head_desc = &np->rx_ring[entry]; + desc_status = le32_to_cpu(np->rx_head_desc->cmd_status); + } + refill_rx(dev); + + /* Restart Rx engine if stopped. */ + if (np->oom) + mod_timer(&np->timer, jiffies + 1); + else + writel(RxOn, ioaddr + ChipCmd); +} + +static void netdev_error(struct net_device *dev, int intr_status) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem * ioaddr = ns_ioaddr(dev); + + spin_lock(&np->lock); + if (intr_status & LinkChange) { + u16 lpa = mdio_read(dev, MII_LPA); + if (mdio_read(dev, MII_BMCR) & BMCR_ANENABLE && + netif_msg_link(np)) { + printk(KERN_INFO + "%s: Autonegotiation advertising" + " %#04x partner %#04x.\n", dev->name, + np->advertising, lpa); + } + + /* read MII int status to clear the flag */ + readw(ioaddr + MIntrStatus); + check_link(dev); + } + if (intr_status & StatsMax) { + __get_stats(dev); + } + if (intr_status & IntrTxUnderrun) { + if ((np->tx_config & TxDrthMask) < TX_DRTH_VAL_LIMIT) { + np->tx_config += TX_DRTH_VAL_INC; + if (netif_msg_tx_err(np)) + printk(KERN_NOTICE + "%s: increased tx threshold, txcfg %#08x.\n", + dev->name, np->tx_config); + } else { + if (netif_msg_tx_err(np)) + printk(KERN_NOTICE + "%s: tx underrun with maximum tx threshold, txcfg %#08x.\n", + dev->name, np->tx_config); + } + writel(np->tx_config, ioaddr + TxConfig); + } + if (intr_status & WOLPkt && netif_msg_wol(np)) { + int wol_status = readl(ioaddr + WOLCmd); + printk(KERN_NOTICE "%s: Link wake-up event %#08x\n", + dev->name, wol_status); + } + if (intr_status & RxStatusFIFOOver) { + if (netif_msg_rx_err(np) && netif_msg_intr(np)) { + printk(KERN_NOTICE "%s: Rx status FIFO overrun\n", + dev->name); + } + dev->stats.rx_fifo_errors++; + dev->stats.rx_errors++; + } + /* Hmmmmm, it's not clear how to recover from PCI faults. */ + if (intr_status & IntrPCIErr) { + printk(KERN_NOTICE "%s: PCI error %#08x\n", dev->name, + intr_status & IntrPCIErr); + dev->stats.tx_fifo_errors++; + dev->stats.tx_errors++; + dev->stats.rx_fifo_errors++; + dev->stats.rx_errors++; + } + spin_unlock(&np->lock); +} + +static void __get_stats(struct net_device *dev) +{ + void __iomem * ioaddr = ns_ioaddr(dev); + + /* The chip only need report frame silently dropped. */ + dev->stats.rx_crc_errors += readl(ioaddr + RxCRCErrs); + dev->stats.rx_missed_errors += readl(ioaddr + RxMissed); +} + +static struct net_device_stats *get_stats(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + + /* The chip only need report frame silently dropped. */ + spin_lock_irq(&np->lock); + if (netif_running(dev) && !np->hands_off) + __get_stats(dev); + spin_unlock_irq(&np->lock); + + return &dev->stats; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void natsemi_poll_controller(struct net_device *dev) +{ + disable_irq(dev->irq); + intr_handler(dev->irq, dev); + enable_irq(dev->irq); +} +#endif + +#define HASH_TABLE 0x200 +static void __set_rx_mode(struct net_device *dev) +{ + void __iomem * ioaddr = ns_ioaddr(dev); + struct netdev_private *np = netdev_priv(dev); + u8 mc_filter[64]; /* Multicast hash filter */ + u32 rx_mode; + + if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */ + rx_mode = RxFilterEnable | AcceptBroadcast + | AcceptAllMulticast | AcceptAllPhys | AcceptMyPhys; + } else if ((netdev_mc_count(dev) > multicast_filter_limit) || + (dev->flags & IFF_ALLMULTI)) { + rx_mode = RxFilterEnable | AcceptBroadcast + | AcceptAllMulticast | AcceptMyPhys; + } else { + struct netdev_hw_addr *ha; + int i; + + memset(mc_filter, 0, sizeof(mc_filter)); + netdev_for_each_mc_addr(ha, dev) { + int b = (ether_crc(ETH_ALEN, ha->addr) >> 23) & 0x1ff; + mc_filter[b/8] |= (1 << (b & 0x07)); + } + rx_mode = RxFilterEnable | AcceptBroadcast + | AcceptMulticast | AcceptMyPhys; + for (i = 0; i < 64; i += 2) { + writel(HASH_TABLE + i, ioaddr + RxFilterAddr); + writel((mc_filter[i + 1] << 8) + mc_filter[i], + ioaddr + RxFilterData); + } + } + writel(rx_mode, ioaddr + RxFilterAddr); + np->cur_rx_mode = rx_mode; +} + +static int natsemi_change_mtu(struct net_device *dev, int new_mtu) +{ + if (new_mtu < 64 || new_mtu > NATSEMI_RX_LIMIT-NATSEMI_HEADERS) + return -EINVAL; + + dev->mtu = new_mtu; + + /* synchronized against open : rtnl_lock() held by caller */ + if (netif_running(dev)) { + struct netdev_private *np = netdev_priv(dev); + void __iomem * ioaddr = ns_ioaddr(dev); + + disable_irq(dev->irq); + spin_lock(&np->lock); + /* stop engines */ + natsemi_stop_rxtx(dev); + /* drain rx queue */ + drain_rx(dev); + /* change buffers */ + set_bufsize(dev); + reinit_rx(dev); + writel(np->ring_dma, ioaddr + RxRingPtr); + /* restart engines */ + writel(RxOn | TxOn, ioaddr + ChipCmd); + spin_unlock(&np->lock); + enable_irq(dev->irq); + } + return 0; +} + +static void set_rx_mode(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + spin_lock_irq(&np->lock); + if (!np->hands_off) + __set_rx_mode(dev); + spin_unlock_irq(&np->lock); +} + +static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) +{ + struct netdev_private *np = netdev_priv(dev); + strncpy(info->driver, DRV_NAME, ETHTOOL_BUSINFO_LEN); + strncpy(info->version, DRV_VERSION, ETHTOOL_BUSINFO_LEN); + strncpy(info->bus_info, pci_name(np->pci_dev), ETHTOOL_BUSINFO_LEN); +} + +static int get_regs_len(struct net_device *dev) +{ + return NATSEMI_REGS_SIZE; +} + +static int get_eeprom_len(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + return np->eeprom_size; +} + +static int get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) +{ + struct netdev_private *np = netdev_priv(dev); + spin_lock_irq(&np->lock); + netdev_get_ecmd(dev, ecmd); + spin_unlock_irq(&np->lock); + return 0; +} + +static int set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) +{ + struct netdev_private *np = netdev_priv(dev); + int res; + spin_lock_irq(&np->lock); + res = netdev_set_ecmd(dev, ecmd); + spin_unlock_irq(&np->lock); + return res; +} + +static void get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + struct netdev_private *np = netdev_priv(dev); + spin_lock_irq(&np->lock); + netdev_get_wol(dev, &wol->supported, &wol->wolopts); + netdev_get_sopass(dev, wol->sopass); + spin_unlock_irq(&np->lock); +} + +static int set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + struct netdev_private *np = netdev_priv(dev); + int res; + spin_lock_irq(&np->lock); + netdev_set_wol(dev, wol->wolopts); + res = netdev_set_sopass(dev, wol->sopass); + spin_unlock_irq(&np->lock); + return res; +} + +static void get_regs(struct net_device *dev, struct ethtool_regs *regs, void *buf) +{ + struct netdev_private *np = netdev_priv(dev); + regs->version = NATSEMI_REGS_VER; + spin_lock_irq(&np->lock); + netdev_get_regs(dev, buf); + spin_unlock_irq(&np->lock); +} + +static u32 get_msglevel(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + return np->msg_enable; +} + +static void set_msglevel(struct net_device *dev, u32 val) +{ + struct netdev_private *np = netdev_priv(dev); + np->msg_enable = val; +} + +static int nway_reset(struct net_device *dev) +{ + int tmp; + int r = -EINVAL; + /* if autoneg is off, it's an error */ + tmp = mdio_read(dev, MII_BMCR); + if (tmp & BMCR_ANENABLE) { + tmp |= (BMCR_ANRESTART); + mdio_write(dev, MII_BMCR, tmp); + r = 0; + } + return r; +} + +static u32 get_link(struct net_device *dev) +{ + /* LSTATUS is latched low until a read - so read twice */ + mdio_read(dev, MII_BMSR); + return (mdio_read(dev, MII_BMSR)&BMSR_LSTATUS) ? 1:0; +} + +static int get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, u8 *data) +{ + struct netdev_private *np = netdev_priv(dev); + u8 *eebuf; + int res; + + eebuf = kmalloc(np->eeprom_size, GFP_KERNEL); + if (!eebuf) + return -ENOMEM; + + eeprom->magic = PCI_VENDOR_ID_NS | (PCI_DEVICE_ID_NS_83815<<16); + spin_lock_irq(&np->lock); + res = netdev_get_eeprom(dev, eebuf); + spin_unlock_irq(&np->lock); + if (!res) + memcpy(data, eebuf+eeprom->offset, eeprom->len); + kfree(eebuf); + return res; +} + +static const struct ethtool_ops ethtool_ops = { + .get_drvinfo = get_drvinfo, + .get_regs_len = get_regs_len, + .get_eeprom_len = get_eeprom_len, + .get_settings = get_settings, + .set_settings = set_settings, + .get_wol = get_wol, + .set_wol = set_wol, + .get_regs = get_regs, + .get_msglevel = get_msglevel, + .set_msglevel = set_msglevel, + .nway_reset = nway_reset, + .get_link = get_link, + .get_eeprom = get_eeprom, +}; + +static int netdev_set_wol(struct net_device *dev, u32 newval) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem * ioaddr = ns_ioaddr(dev); + u32 data = readl(ioaddr + WOLCmd) & ~WakeOptsSummary; + + /* translate to bitmasks this chip understands */ + if (newval & WAKE_PHY) + data |= WakePhy; + if (newval & WAKE_UCAST) + data |= WakeUnicast; + if (newval & WAKE_MCAST) + data |= WakeMulticast; + if (newval & WAKE_BCAST) + data |= WakeBroadcast; + if (newval & WAKE_ARP) + data |= WakeArp; + if (newval & WAKE_MAGIC) + data |= WakeMagic; + if (np->srr >= SRR_DP83815_D) { + if (newval & WAKE_MAGICSECURE) { + data |= WakeMagicSecure; + } + } + + writel(data, ioaddr + WOLCmd); + + return 0; +} + +static int netdev_get_wol(struct net_device *dev, u32 *supported, u32 *cur) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem * ioaddr = ns_ioaddr(dev); + u32 regval = readl(ioaddr + WOLCmd); + + *supported = (WAKE_PHY | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST + | WAKE_ARP | WAKE_MAGIC); + + if (np->srr >= SRR_DP83815_D) { + /* SOPASS works on revD and higher */ + *supported |= WAKE_MAGICSECURE; + } + *cur = 0; + + /* translate from chip bitmasks */ + if (regval & WakePhy) + *cur |= WAKE_PHY; + if (regval & WakeUnicast) + *cur |= WAKE_UCAST; + if (regval & WakeMulticast) + *cur |= WAKE_MCAST; + if (regval & WakeBroadcast) + *cur |= WAKE_BCAST; + if (regval & WakeArp) + *cur |= WAKE_ARP; + if (regval & WakeMagic) + *cur |= WAKE_MAGIC; + if (regval & WakeMagicSecure) { + /* this can be on in revC, but it's broken */ + *cur |= WAKE_MAGICSECURE; + } + + return 0; +} + +static int netdev_set_sopass(struct net_device *dev, u8 *newval) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem * ioaddr = ns_ioaddr(dev); + u16 *sval = (u16 *)newval; + u32 addr; + + if (np->srr < SRR_DP83815_D) { + return 0; + } + + /* enable writing to these registers by disabling the RX filter */ + addr = readl(ioaddr + RxFilterAddr) & ~RFCRAddressMask; + addr &= ~RxFilterEnable; + writel(addr, ioaddr + RxFilterAddr); + + /* write the three words to (undocumented) RFCR vals 0xa, 0xc, 0xe */ + writel(addr | 0xa, ioaddr + RxFilterAddr); + writew(sval[0], ioaddr + RxFilterData); + + writel(addr | 0xc, ioaddr + RxFilterAddr); + writew(sval[1], ioaddr + RxFilterData); + + writel(addr | 0xe, ioaddr + RxFilterAddr); + writew(sval[2], ioaddr + RxFilterData); + + /* re-enable the RX filter */ + writel(addr | RxFilterEnable, ioaddr + RxFilterAddr); + + return 0; +} + +static int netdev_get_sopass(struct net_device *dev, u8 *data) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem * ioaddr = ns_ioaddr(dev); + u16 *sval = (u16 *)data; + u32 addr; + + if (np->srr < SRR_DP83815_D) { + sval[0] = sval[1] = sval[2] = 0; + return 0; + } + + /* read the three words from (undocumented) RFCR vals 0xa, 0xc, 0xe */ + addr = readl(ioaddr + RxFilterAddr) & ~RFCRAddressMask; + + writel(addr | 0xa, ioaddr + RxFilterAddr); + sval[0] = readw(ioaddr + RxFilterData); + + writel(addr | 0xc, ioaddr + RxFilterAddr); + sval[1] = readw(ioaddr + RxFilterData); + + writel(addr | 0xe, ioaddr + RxFilterAddr); + sval[2] = readw(ioaddr + RxFilterData); + + writel(addr, ioaddr + RxFilterAddr); + + return 0; +} + +static int netdev_get_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd) +{ + struct netdev_private *np = netdev_priv(dev); + u32 tmp; + + ecmd->port = dev->if_port; + ethtool_cmd_speed_set(ecmd, np->speed); + ecmd->duplex = np->duplex; + ecmd->autoneg = np->autoneg; + ecmd->advertising = 0; + if (np->advertising & ADVERTISE_10HALF) + ecmd->advertising |= ADVERTISED_10baseT_Half; + if (np->advertising & ADVERTISE_10FULL) + ecmd->advertising |= ADVERTISED_10baseT_Full; + if (np->advertising & ADVERTISE_100HALF) + ecmd->advertising |= ADVERTISED_100baseT_Half; + if (np->advertising & ADVERTISE_100FULL) + ecmd->advertising |= ADVERTISED_100baseT_Full; + ecmd->supported = (SUPPORTED_Autoneg | + SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | + SUPPORTED_TP | SUPPORTED_MII | SUPPORTED_FIBRE); + ecmd->phy_address = np->phy_addr_external; + /* + * We intentionally report the phy address of the external + * phy, even if the internal phy is used. This is necessary + * to work around a deficiency of the ethtool interface: + * It's only possible to query the settings of the active + * port. Therefore + * # ethtool -s ethX port mii + * actually sends an ioctl to switch to port mii with the + * settings that are used for the current active port. + * If we would report a different phy address in this + * command, then + * # ethtool -s ethX port tp;ethtool -s ethX port mii + * would unintentionally change the phy address. + * + * Fortunately the phy address doesn't matter with the + * internal phy... + */ + + /* set information based on active port type */ + switch (ecmd->port) { + default: + case PORT_TP: + ecmd->advertising |= ADVERTISED_TP; + ecmd->transceiver = XCVR_INTERNAL; + break; + case PORT_MII: + ecmd->advertising |= ADVERTISED_MII; + ecmd->transceiver = XCVR_EXTERNAL; + break; + case PORT_FIBRE: + ecmd->advertising |= ADVERTISED_FIBRE; + ecmd->transceiver = XCVR_EXTERNAL; + break; + } + + /* if autonegotiation is on, try to return the active speed/duplex */ + if (ecmd->autoneg == AUTONEG_ENABLE) { + ecmd->advertising |= ADVERTISED_Autoneg; + tmp = mii_nway_result( + np->advertising & mdio_read(dev, MII_LPA)); + if (tmp == LPA_100FULL || tmp == LPA_100HALF) + ethtool_cmd_speed_set(ecmd, SPEED_100); + else + ethtool_cmd_speed_set(ecmd, SPEED_10); + if (tmp == LPA_100FULL || tmp == LPA_10FULL) + ecmd->duplex = DUPLEX_FULL; + else + ecmd->duplex = DUPLEX_HALF; + } + + /* ignore maxtxpkt, maxrxpkt for now */ + + return 0; +} + +static int netdev_set_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd) +{ + struct netdev_private *np = netdev_priv(dev); + + if (ecmd->port != PORT_TP && ecmd->port != PORT_MII && ecmd->port != PORT_FIBRE) + return -EINVAL; + if (ecmd->transceiver != XCVR_INTERNAL && ecmd->transceiver != XCVR_EXTERNAL) + return -EINVAL; + if (ecmd->autoneg == AUTONEG_ENABLE) { + if ((ecmd->advertising & (ADVERTISED_10baseT_Half | + ADVERTISED_10baseT_Full | + ADVERTISED_100baseT_Half | + ADVERTISED_100baseT_Full)) == 0) { + return -EINVAL; + } + } else if (ecmd->autoneg == AUTONEG_DISABLE) { + u32 speed = ethtool_cmd_speed(ecmd); + if (speed != SPEED_10 && speed != SPEED_100) + return -EINVAL; + if (ecmd->duplex != DUPLEX_HALF && ecmd->duplex != DUPLEX_FULL) + return -EINVAL; + } else { + return -EINVAL; + } + + /* + * If we're ignoring the PHY then autoneg and the internal + * transceiver are really not going to work so don't let the + * user select them. + */ + if (np->ignore_phy && (ecmd->autoneg == AUTONEG_ENABLE || + ecmd->port == PORT_TP)) + return -EINVAL; + + /* + * maxtxpkt, maxrxpkt: ignored for now. + * + * transceiver: + * PORT_TP is always XCVR_INTERNAL, PORT_MII and PORT_FIBRE are always + * XCVR_EXTERNAL. The implementation thus ignores ecmd->transceiver and + * selects based on ecmd->port. + * + * Actually PORT_FIBRE is nearly identical to PORT_MII: it's for fibre + * phys that are connected to the mii bus. It's used to apply fibre + * specific updates. + */ + + /* WHEW! now lets bang some bits */ + + /* save the parms */ + dev->if_port = ecmd->port; + np->autoneg = ecmd->autoneg; + np->phy_addr_external = ecmd->phy_address & PhyAddrMask; + if (np->autoneg == AUTONEG_ENABLE) { + /* advertise only what has been requested */ + np->advertising &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4); + if (ecmd->advertising & ADVERTISED_10baseT_Half) + np->advertising |= ADVERTISE_10HALF; + if (ecmd->advertising & ADVERTISED_10baseT_Full) + np->advertising |= ADVERTISE_10FULL; + if (ecmd->advertising & ADVERTISED_100baseT_Half) + np->advertising |= ADVERTISE_100HALF; + if (ecmd->advertising & ADVERTISED_100baseT_Full) + np->advertising |= ADVERTISE_100FULL; + } else { + np->speed = ethtool_cmd_speed(ecmd); + np->duplex = ecmd->duplex; + /* user overriding the initial full duplex parm? */ + if (np->duplex == DUPLEX_HALF) + np->full_duplex = 0; + } + + /* get the right phy enabled */ + if (ecmd->port == PORT_TP) + switch_port_internal(dev); + else + switch_port_external(dev); + + /* set parms and see how this affected our link status */ + init_phy_fixup(dev); + check_link(dev); + return 0; +} + +static int netdev_get_regs(struct net_device *dev, u8 *buf) +{ + int i; + int j; + u32 rfcr; + u32 *rbuf = (u32 *)buf; + void __iomem * ioaddr = ns_ioaddr(dev); + + /* read non-mii page 0 of registers */ + for (i = 0; i < NATSEMI_PG0_NREGS/2; i++) { + rbuf[i] = readl(ioaddr + i*4); + } + + /* read current mii registers */ + for (i = NATSEMI_PG0_NREGS/2; i < NATSEMI_PG0_NREGS; i++) + rbuf[i] = mdio_read(dev, i & 0x1f); + + /* read only the 'magic' registers from page 1 */ + writew(1, ioaddr + PGSEL); + rbuf[i++] = readw(ioaddr + PMDCSR); + rbuf[i++] = readw(ioaddr + TSTDAT); + rbuf[i++] = readw(ioaddr + DSPCFG); + rbuf[i++] = readw(ioaddr + SDCFG); + writew(0, ioaddr + PGSEL); + + /* read RFCR indexed registers */ + rfcr = readl(ioaddr + RxFilterAddr); + for (j = 0; j < NATSEMI_RFDR_NREGS; j++) { + writel(j*2, ioaddr + RxFilterAddr); + rbuf[i++] = readw(ioaddr + RxFilterData); + } + writel(rfcr, ioaddr + RxFilterAddr); + + /* the interrupt status is clear-on-read - see if we missed any */ + if (rbuf[4] & rbuf[5]) { + printk(KERN_WARNING + "%s: shoot, we dropped an interrupt (%#08x)\n", + dev->name, rbuf[4] & rbuf[5]); + } + + return 0; +} + +#define SWAP_BITS(x) ( (((x) & 0x0001) << 15) | (((x) & 0x0002) << 13) \ + | (((x) & 0x0004) << 11) | (((x) & 0x0008) << 9) \ + | (((x) & 0x0010) << 7) | (((x) & 0x0020) << 5) \ + | (((x) & 0x0040) << 3) | (((x) & 0x0080) << 1) \ + | (((x) & 0x0100) >> 1) | (((x) & 0x0200) >> 3) \ + | (((x) & 0x0400) >> 5) | (((x) & 0x0800) >> 7) \ + | (((x) & 0x1000) >> 9) | (((x) & 0x2000) >> 11) \ + | (((x) & 0x4000) >> 13) | (((x) & 0x8000) >> 15) ) + +static int netdev_get_eeprom(struct net_device *dev, u8 *buf) +{ + int i; + u16 *ebuf = (u16 *)buf; + void __iomem * ioaddr = ns_ioaddr(dev); + struct netdev_private *np = netdev_priv(dev); + + /* eeprom_read reads 16 bits, and indexes by 16 bits */ + for (i = 0; i < np->eeprom_size/2; i++) { + ebuf[i] = eeprom_read(ioaddr, i); + /* The EEPROM itself stores data bit-swapped, but eeprom_read + * reads it back "sanely". So we swap it back here in order to + * present it to userland as it is stored. */ + ebuf[i] = SWAP_BITS(ebuf[i]); + } + return 0; +} + +static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + struct mii_ioctl_data *data = if_mii(rq); + struct netdev_private *np = netdev_priv(dev); + + switch(cmd) { + case SIOCGMIIPHY: /* Get address of MII PHY in use. */ + data->phy_id = np->phy_addr_external; + /* Fall Through */ + + case SIOCGMIIREG: /* Read MII PHY register. */ + /* The phy_id is not enough to uniquely identify + * the intended target. Therefore the command is sent to + * the given mii on the current port. + */ + if (dev->if_port == PORT_TP) { + if ((data->phy_id & 0x1f) == np->phy_addr_external) + data->val_out = mdio_read(dev, + data->reg_num & 0x1f); + else + data->val_out = 0; + } else { + move_int_phy(dev, data->phy_id & 0x1f); + data->val_out = miiport_read(dev, data->phy_id & 0x1f, + data->reg_num & 0x1f); + } + return 0; + + case SIOCSMIIREG: /* Write MII PHY register. */ + if (dev->if_port == PORT_TP) { + if ((data->phy_id & 0x1f) == np->phy_addr_external) { + if ((data->reg_num & 0x1f) == MII_ADVERTISE) + np->advertising = data->val_in; + mdio_write(dev, data->reg_num & 0x1f, + data->val_in); + } + } else { + if ((data->phy_id & 0x1f) == np->phy_addr_external) { + if ((data->reg_num & 0x1f) == MII_ADVERTISE) + np->advertising = data->val_in; + } + move_int_phy(dev, data->phy_id & 0x1f); + miiport_write(dev, data->phy_id & 0x1f, + data->reg_num & 0x1f, + data->val_in); + } + return 0; + default: + return -EOPNOTSUPP; + } +} + +static void enable_wol_mode(struct net_device *dev, int enable_intr) +{ + void __iomem * ioaddr = ns_ioaddr(dev); + struct netdev_private *np = netdev_priv(dev); + + if (netif_msg_wol(np)) + printk(KERN_INFO "%s: remaining active for wake-on-lan\n", + dev->name); + + /* For WOL we must restart the rx process in silent mode. + * Write NULL to the RxRingPtr. Only possible if + * rx process is stopped + */ + writel(0, ioaddr + RxRingPtr); + + /* read WoL status to clear */ + readl(ioaddr + WOLCmd); + + /* PME on, clear status */ + writel(np->SavedClkRun | PMEEnable | PMEStatus, ioaddr + ClkRun); + + /* and restart the rx process */ + writel(RxOn, ioaddr + ChipCmd); + + if (enable_intr) { + /* enable the WOL interrupt. + * Could be used to send a netlink message. + */ + writel(WOLPkt | LinkChange, ioaddr + IntrMask); + natsemi_irq_enable(dev); + } +} + +static int netdev_close(struct net_device *dev) +{ + void __iomem * ioaddr = ns_ioaddr(dev); + struct netdev_private *np = netdev_priv(dev); + + if (netif_msg_ifdown(np)) + printk(KERN_DEBUG + "%s: Shutting down ethercard, status was %#04x.\n", + dev->name, (int)readl(ioaddr + ChipCmd)); + if (netif_msg_pktdata(np)) + printk(KERN_DEBUG + "%s: Queue pointers were Tx %d / %d, Rx %d / %d.\n", + dev->name, np->cur_tx, np->dirty_tx, + np->cur_rx, np->dirty_rx); + + napi_disable(&np->napi); + + /* + * FIXME: what if someone tries to close a device + * that is suspended? + * Should we reenable the nic to switch to + * the final WOL settings? + */ + + del_timer_sync(&np->timer); + disable_irq(dev->irq); + spin_lock_irq(&np->lock); + natsemi_irq_disable(dev); + np->hands_off = 1; + spin_unlock_irq(&np->lock); + enable_irq(dev->irq); + + free_irq(dev->irq, dev); + + /* Interrupt disabled, interrupt handler released, + * queue stopped, timer deleted, rtnl_lock held + * All async codepaths that access the driver are disabled. + */ + spin_lock_irq(&np->lock); + np->hands_off = 0; + readl(ioaddr + IntrMask); + readw(ioaddr + MIntrStatus); + + /* Freeze Stats */ + writel(StatsFreeze, ioaddr + StatsCtrl); + + /* Stop the chip's Tx and Rx processes. */ + natsemi_stop_rxtx(dev); + + __get_stats(dev); + spin_unlock_irq(&np->lock); + + /* clear the carrier last - an interrupt could reenable it otherwise */ + netif_carrier_off(dev); + netif_stop_queue(dev); + + dump_ring(dev); + drain_ring(dev); + free_ring(dev); + + { + u32 wol = readl(ioaddr + WOLCmd) & WakeOptsSummary; + if (wol) { + /* restart the NIC in WOL mode. + * The nic must be stopped for this. + */ + enable_wol_mode(dev, 0); + } else { + /* Restore PME enable bit unmolested */ + writel(np->SavedClkRun, ioaddr + ClkRun); + } + } + return 0; +} + + +static void __devexit natsemi_remove1 (struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + void __iomem * ioaddr = ns_ioaddr(dev); + + NATSEMI_REMOVE_FILE(pdev, dspcfg_workaround); + unregister_netdev (dev); + pci_release_regions (pdev); + iounmap(ioaddr); + free_netdev (dev); + pci_set_drvdata(pdev, NULL); +} + +#ifdef CONFIG_PM + +/* + * The ns83815 chip doesn't have explicit RxStop bits. + * Kicking the Rx or Tx process for a new packet reenables the Rx process + * of the nic, thus this function must be very careful: + * + * suspend/resume synchronization: + * entry points: + * netdev_open, netdev_close, netdev_ioctl, set_rx_mode, intr_handler, + * start_tx, ns_tx_timeout + * + * No function accesses the hardware without checking np->hands_off. + * the check occurs under spin_lock_irq(&np->lock); + * exceptions: + * * netdev_ioctl: noncritical access. + * * netdev_open: cannot happen due to the device_detach + * * netdev_close: doesn't hurt. + * * netdev_timer: timer stopped by natsemi_suspend. + * * intr_handler: doesn't acquire the spinlock. suspend calls + * disable_irq() to enforce synchronization. + * * natsemi_poll: checks before reenabling interrupts. suspend + * sets hands_off, disables interrupts and then waits with + * napi_disable(). + * + * Interrupts must be disabled, otherwise hands_off can cause irq storms. + */ + +static int natsemi_suspend (struct pci_dev *pdev, pm_message_t state) +{ + struct net_device *dev = pci_get_drvdata (pdev); + struct netdev_private *np = netdev_priv(dev); + void __iomem * ioaddr = ns_ioaddr(dev); + + rtnl_lock(); + if (netif_running (dev)) { + del_timer_sync(&np->timer); + + disable_irq(dev->irq); + spin_lock_irq(&np->lock); + + natsemi_irq_disable(dev); + np->hands_off = 1; + natsemi_stop_rxtx(dev); + netif_stop_queue(dev); + + spin_unlock_irq(&np->lock); + enable_irq(dev->irq); + + napi_disable(&np->napi); + + /* Update the error counts. */ + __get_stats(dev); + + /* pci_power_off(pdev, -1); */ + drain_ring(dev); + { + u32 wol = readl(ioaddr + WOLCmd) & WakeOptsSummary; + /* Restore PME enable bit */ + if (wol) { + /* restart the NIC in WOL mode. + * The nic must be stopped for this. + * FIXME: use the WOL interrupt + */ + enable_wol_mode(dev, 0); + } else { + /* Restore PME enable bit unmolested */ + writel(np->SavedClkRun, ioaddr + ClkRun); + } + } + } + netif_device_detach(dev); + rtnl_unlock(); + return 0; +} + + +static int natsemi_resume (struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata (pdev); + struct netdev_private *np = netdev_priv(dev); + int ret = 0; + + rtnl_lock(); + if (netif_device_present(dev)) + goto out; + if (netif_running(dev)) { + BUG_ON(!np->hands_off); + ret = pci_enable_device(pdev); + if (ret < 0) { + dev_err(&pdev->dev, + "pci_enable_device() failed: %d\n", ret); + goto out; + } + /* pci_power_on(pdev); */ + + napi_enable(&np->napi); + + natsemi_reset(dev); + init_ring(dev); + disable_irq(dev->irq); + spin_lock_irq(&np->lock); + np->hands_off = 0; + init_registers(dev); + netif_device_attach(dev); + spin_unlock_irq(&np->lock); + enable_irq(dev->irq); + + mod_timer(&np->timer, round_jiffies(jiffies + 1*HZ)); + } + netif_device_attach(dev); +out: + rtnl_unlock(); + return ret; +} + +#endif /* CONFIG_PM */ + +static struct pci_driver natsemi_driver = { + .name = DRV_NAME, + .id_table = natsemi_pci_tbl, + .probe = natsemi_probe1, + .remove = __devexit_p(natsemi_remove1), +#ifdef CONFIG_PM + .suspend = natsemi_suspend, + .resume = natsemi_resume, +#endif +}; + +static int __init natsemi_init_mod (void) +{ +/* when a module, this is printed whether or not devices are found in probe */ +#ifdef MODULE + printk(version); +#endif + + return pci_register_driver(&natsemi_driver); +} + +static void __exit natsemi_exit_mod (void) +{ + pci_unregister_driver (&natsemi_driver); +} + +module_init(natsemi_init_mod); +module_exit(natsemi_exit_mod); + diff --git a/drivers/net/ethernet/natsemi/ns83820.c b/drivers/net/ethernet/natsemi/ns83820.c new file mode 100644 index 000000000000..e736aec588fc --- /dev/null +++ b/drivers/net/ethernet/natsemi/ns83820.c @@ -0,0 +1,2312 @@ +#define VERSION "0.23" +/* ns83820.c by Benjamin LaHaise with contributions. + * + * Questions/comments/discussion to linux-ns83820@kvack.org. + * + * $Revision: 1.34.2.23 $ + * + * Copyright 2001 Benjamin LaHaise. + * Copyright 2001, 2002 Red Hat. + * + * Mmmm, chocolate vanilla mocha... + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * + * ChangeLog + * ========= + * 20010414 0.1 - created + * 20010622 0.2 - basic rx and tx. + * 20010711 0.3 - added duplex and link state detection support. + * 20010713 0.4 - zero copy, no hangs. + * 0.5 - 64 bit dma support (davem will hate me for this) + * - disable jumbo frames to avoid tx hangs + * - work around tx deadlocks on my 1.02 card via + * fiddling with TXCFG + * 20010810 0.6 - use pci dma api for ringbuffers, work on ia64 + * 20010816 0.7 - misc cleanups + * 20010826 0.8 - fix critical zero copy bugs + * 0.9 - internal experiment + * 20010827 0.10 - fix ia64 unaligned access. + * 20010906 0.11 - accept all packets with checksum errors as + * otherwise fragments get lost + * - fix >> 32 bugs + * 0.12 - add statistics counters + * - add allmulti/promisc support + * 20011009 0.13 - hotplug support, other smaller pci api cleanups + * 20011204 0.13a - optical transceiver support added + * by Michael Clark + * 20011205 0.13b - call register_netdev earlier in initialization + * suppress duplicate link status messages + * 20011117 0.14 - ethtool GDRVINFO, GLINK support from jgarzik + * 20011204 0.15 get ppc (big endian) working + * 20011218 0.16 various cleanups + * 20020310 0.17 speedups + * 20020610 0.18 - actually use the pci dma api for highmem + * - remove pci latency register fiddling + * 0.19 - better bist support + * - add ihr and reset_phy parameters + * - gmii bus probing + * - fix missed txok introduced during performance + * tuning + * 0.20 - fix stupid RFEN thinko. i am such a smurf. + * 20040828 0.21 - add hardware vlan accleration + * by Neil Horman + * 20050406 0.22 - improved DAC ifdefs from Andi Kleen + * - removal of dead code from Adrian Bunk + * - fix half duplex collision behaviour + * Driver Overview + * =============== + * + * This driver was originally written for the National Semiconductor + * 83820 chip, a 10/100/1000 Mbps 64 bit PCI ethernet NIC. Hopefully + * this code will turn out to be a) clean, b) correct, and c) fast. + * With that in mind, I'm aiming to split the code up as much as + * reasonably possible. At present there are X major sections that + * break down into a) packet receive, b) packet transmit, c) link + * management, d) initialization and configuration. Where possible, + * these code paths are designed to run in parallel. + * + * This driver has been tested and found to work with the following + * cards (in no particular order): + * + * Cameo SOHO-GA2000T SOHO-GA2500T + * D-Link DGE-500T + * PureData PDP8023Z-TG + * SMC SMC9452TX SMC9462TX + * Netgear GA621 + * + * Special thanks to SMC for providing hardware to test this driver on. + * + * Reports of success or failure would be greatly appreciated. + */ +//#define dprintk printk +#define dprintk(x...) do { } while (0) + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include /* for iph */ +#include /* for IPPROTO_... */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#define DRV_NAME "ns83820" + +/* Global parameters. See module_param near the bottom. */ +static int ihr = 2; +static int reset_phy = 0; +static int lnksts = 0; /* CFG_LNKSTS bit polarity */ + +/* Dprintk is used for more interesting debug events */ +#undef Dprintk +#define Dprintk dprintk + +/* tunables */ +#define RX_BUF_SIZE 1500 /* 8192 */ +#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) +#define NS83820_VLAN_ACCEL_SUPPORT +#endif + +/* Must not exceed ~65000. */ +#define NR_RX_DESC 64 +#define NR_TX_DESC 128 + +/* not tunable */ +#define REAL_RX_BUF_SIZE (RX_BUF_SIZE + 14) /* rx/tx mac addr + type */ + +#define MIN_TX_DESC_FREE 8 + +/* register defines */ +#define CFGCS 0x04 + +#define CR_TXE 0x00000001 +#define CR_TXD 0x00000002 +/* Ramit : Here's a tip, don't do a RXD immediately followed by an RXE + * The Receive engine skips one descriptor and moves + * onto the next one!! */ +#define CR_RXE 0x00000004 +#define CR_RXD 0x00000008 +#define CR_TXR 0x00000010 +#define CR_RXR 0x00000020 +#define CR_SWI 0x00000080 +#define CR_RST 0x00000100 + +#define PTSCR_EEBIST_FAIL 0x00000001 +#define PTSCR_EEBIST_EN 0x00000002 +#define PTSCR_EELOAD_EN 0x00000004 +#define PTSCR_RBIST_FAIL 0x000001b8 +#define PTSCR_RBIST_DONE 0x00000200 +#define PTSCR_RBIST_EN 0x00000400 +#define PTSCR_RBIST_RST 0x00002000 + +#define MEAR_EEDI 0x00000001 +#define MEAR_EEDO 0x00000002 +#define MEAR_EECLK 0x00000004 +#define MEAR_EESEL 0x00000008 +#define MEAR_MDIO 0x00000010 +#define MEAR_MDDIR 0x00000020 +#define MEAR_MDC 0x00000040 + +#define ISR_TXDESC3 0x40000000 +#define ISR_TXDESC2 0x20000000 +#define ISR_TXDESC1 0x10000000 +#define ISR_TXDESC0 0x08000000 +#define ISR_RXDESC3 0x04000000 +#define ISR_RXDESC2 0x02000000 +#define ISR_RXDESC1 0x01000000 +#define ISR_RXDESC0 0x00800000 +#define ISR_TXRCMP 0x00400000 +#define ISR_RXRCMP 0x00200000 +#define ISR_DPERR 0x00100000 +#define ISR_SSERR 0x00080000 +#define ISR_RMABT 0x00040000 +#define ISR_RTABT 0x00020000 +#define ISR_RXSOVR 0x00010000 +#define ISR_HIBINT 0x00008000 +#define ISR_PHY 0x00004000 +#define ISR_PME 0x00002000 +#define ISR_SWI 0x00001000 +#define ISR_MIB 0x00000800 +#define ISR_TXURN 0x00000400 +#define ISR_TXIDLE 0x00000200 +#define ISR_TXERR 0x00000100 +#define ISR_TXDESC 0x00000080 +#define ISR_TXOK 0x00000040 +#define ISR_RXORN 0x00000020 +#define ISR_RXIDLE 0x00000010 +#define ISR_RXEARLY 0x00000008 +#define ISR_RXERR 0x00000004 +#define ISR_RXDESC 0x00000002 +#define ISR_RXOK 0x00000001 + +#define TXCFG_CSI 0x80000000 +#define TXCFG_HBI 0x40000000 +#define TXCFG_MLB 0x20000000 +#define TXCFG_ATP 0x10000000 +#define TXCFG_ECRETRY 0x00800000 +#define TXCFG_BRST_DIS 0x00080000 +#define TXCFG_MXDMA1024 0x00000000 +#define TXCFG_MXDMA512 0x00700000 +#define TXCFG_MXDMA256 0x00600000 +#define TXCFG_MXDMA128 0x00500000 +#define TXCFG_MXDMA64 0x00400000 +#define TXCFG_MXDMA32 0x00300000 +#define TXCFG_MXDMA16 0x00200000 +#define TXCFG_MXDMA8 0x00100000 + +#define CFG_LNKSTS 0x80000000 +#define CFG_SPDSTS 0x60000000 +#define CFG_SPDSTS1 0x40000000 +#define CFG_SPDSTS0 0x20000000 +#define CFG_DUPSTS 0x10000000 +#define CFG_TBI_EN 0x01000000 +#define CFG_MODE_1000 0x00400000 +/* Ramit : Dont' ever use AUTO_1000, it never works and is buggy. + * Read the Phy response and then configure the MAC accordingly */ +#define CFG_AUTO_1000 0x00200000 +#define CFG_PINT_CTL 0x001c0000 +#define CFG_PINT_DUPSTS 0x00100000 +#define CFG_PINT_LNKSTS 0x00080000 +#define CFG_PINT_SPDSTS 0x00040000 +#define CFG_TMRTEST 0x00020000 +#define CFG_MRM_DIS 0x00010000 +#define CFG_MWI_DIS 0x00008000 +#define CFG_T64ADDR 0x00004000 +#define CFG_PCI64_DET 0x00002000 +#define CFG_DATA64_EN 0x00001000 +#define CFG_M64ADDR 0x00000800 +#define CFG_PHY_RST 0x00000400 +#define CFG_PHY_DIS 0x00000200 +#define CFG_EXTSTS_EN 0x00000100 +#define CFG_REQALG 0x00000080 +#define CFG_SB 0x00000040 +#define CFG_POW 0x00000020 +#define CFG_EXD 0x00000010 +#define CFG_PESEL 0x00000008 +#define CFG_BROM_DIS 0x00000004 +#define CFG_EXT_125 0x00000002 +#define CFG_BEM 0x00000001 + +#define EXTSTS_UDPPKT 0x00200000 +#define EXTSTS_TCPPKT 0x00080000 +#define EXTSTS_IPPKT 0x00020000 +#define EXTSTS_VPKT 0x00010000 +#define EXTSTS_VTG_MASK 0x0000ffff + +#define SPDSTS_POLARITY (CFG_SPDSTS1 | CFG_SPDSTS0 | CFG_DUPSTS | (lnksts ? CFG_LNKSTS : 0)) + +#define MIBC_MIBS 0x00000008 +#define MIBC_ACLR 0x00000004 +#define MIBC_FRZ 0x00000002 +#define MIBC_WRN 0x00000001 + +#define PCR_PSEN (1 << 31) +#define PCR_PS_MCAST (1 << 30) +#define PCR_PS_DA (1 << 29) +#define PCR_STHI_8 (3 << 23) +#define PCR_STLO_4 (1 << 23) +#define PCR_FFHI_8K (3 << 21) +#define PCR_FFLO_4K (1 << 21) +#define PCR_PAUSE_CNT 0xFFFE + +#define RXCFG_AEP 0x80000000 +#define RXCFG_ARP 0x40000000 +#define RXCFG_STRIPCRC 0x20000000 +#define RXCFG_RX_FD 0x10000000 +#define RXCFG_ALP 0x08000000 +#define RXCFG_AIRL 0x04000000 +#define RXCFG_MXDMA512 0x00700000 +#define RXCFG_DRTH 0x0000003e +#define RXCFG_DRTH0 0x00000002 + +#define RFCR_RFEN 0x80000000 +#define RFCR_AAB 0x40000000 +#define RFCR_AAM 0x20000000 +#define RFCR_AAU 0x10000000 +#define RFCR_APM 0x08000000 +#define RFCR_APAT 0x07800000 +#define RFCR_APAT3 0x04000000 +#define RFCR_APAT2 0x02000000 +#define RFCR_APAT1 0x01000000 +#define RFCR_APAT0 0x00800000 +#define RFCR_AARP 0x00400000 +#define RFCR_MHEN 0x00200000 +#define RFCR_UHEN 0x00100000 +#define RFCR_ULM 0x00080000 + +#define VRCR_RUDPE 0x00000080 +#define VRCR_RTCPE 0x00000040 +#define VRCR_RIPE 0x00000020 +#define VRCR_IPEN 0x00000010 +#define VRCR_DUTF 0x00000008 +#define VRCR_DVTF 0x00000004 +#define VRCR_VTREN 0x00000002 +#define VRCR_VTDEN 0x00000001 + +#define VTCR_PPCHK 0x00000008 +#define VTCR_GCHK 0x00000004 +#define VTCR_VPPTI 0x00000002 +#define VTCR_VGTI 0x00000001 + +#define CR 0x00 +#define CFG 0x04 +#define MEAR 0x08 +#define PTSCR 0x0c +#define ISR 0x10 +#define IMR 0x14 +#define IER 0x18 +#define IHR 0x1c +#define TXDP 0x20 +#define TXDP_HI 0x24 +#define TXCFG 0x28 +#define GPIOR 0x2c +#define RXDP 0x30 +#define RXDP_HI 0x34 +#define RXCFG 0x38 +#define PQCR 0x3c +#define WCSR 0x40 +#define PCR 0x44 +#define RFCR 0x48 +#define RFDR 0x4c + +#define SRR 0x58 + +#define VRCR 0xbc +#define VTCR 0xc0 +#define VDR 0xc4 +#define CCSR 0xcc + +#define TBICR 0xe0 +#define TBISR 0xe4 +#define TANAR 0xe8 +#define TANLPAR 0xec +#define TANER 0xf0 +#define TESR 0xf4 + +#define TBICR_MR_AN_ENABLE 0x00001000 +#define TBICR_MR_RESTART_AN 0x00000200 + +#define TBISR_MR_LINK_STATUS 0x00000020 +#define TBISR_MR_AN_COMPLETE 0x00000004 + +#define TANAR_PS2 0x00000100 +#define TANAR_PS1 0x00000080 +#define TANAR_HALF_DUP 0x00000040 +#define TANAR_FULL_DUP 0x00000020 + +#define GPIOR_GP5_OE 0x00000200 +#define GPIOR_GP4_OE 0x00000100 +#define GPIOR_GP3_OE 0x00000080 +#define GPIOR_GP2_OE 0x00000040 +#define GPIOR_GP1_OE 0x00000020 +#define GPIOR_GP3_OUT 0x00000004 +#define GPIOR_GP1_OUT 0x00000001 + +#define LINK_AUTONEGOTIATE 0x01 +#define LINK_DOWN 0x02 +#define LINK_UP 0x04 + +#define HW_ADDR_LEN sizeof(dma_addr_t) +#define desc_addr_set(desc, addr) \ + do { \ + ((desc)[0] = cpu_to_le32(addr)); \ + if (HW_ADDR_LEN == 8) \ + (desc)[1] = cpu_to_le32(((u64)addr) >> 32); \ + } while(0) +#define desc_addr_get(desc) \ + (le32_to_cpu((desc)[0]) | \ + (HW_ADDR_LEN == 8 ? ((dma_addr_t)le32_to_cpu((desc)[1]))<<32 : 0)) + +#define DESC_LINK 0 +#define DESC_BUFPTR (DESC_LINK + HW_ADDR_LEN/4) +#define DESC_CMDSTS (DESC_BUFPTR + HW_ADDR_LEN/4) +#define DESC_EXTSTS (DESC_CMDSTS + 4/4) + +#define CMDSTS_OWN 0x80000000 +#define CMDSTS_MORE 0x40000000 +#define CMDSTS_INTR 0x20000000 +#define CMDSTS_ERR 0x10000000 +#define CMDSTS_OK 0x08000000 +#define CMDSTS_RUNT 0x00200000 +#define CMDSTS_LEN_MASK 0x0000ffff + +#define CMDSTS_DEST_MASK 0x01800000 +#define CMDSTS_DEST_SELF 0x00800000 +#define CMDSTS_DEST_MULTI 0x01000000 + +#define DESC_SIZE 8 /* Should be cache line sized */ + +struct rx_info { + spinlock_t lock; + int up; + unsigned long idle; + + struct sk_buff *skbs[NR_RX_DESC]; + + __le32 *next_rx_desc; + u16 next_rx, next_empty; + + __le32 *descs; + dma_addr_t phy_descs; +}; + + +struct ns83820 { + u8 __iomem *base; + + struct pci_dev *pci_dev; + struct net_device *ndev; + + struct rx_info rx_info; + struct tasklet_struct rx_tasklet; + + unsigned ihr; + struct work_struct tq_refill; + + /* protects everything below. irqsave when using. */ + spinlock_t misc_lock; + + u32 CFG_cache; + + u32 MEAR_cache; + u32 IMR_cache; + + unsigned linkstate; + + spinlock_t tx_lock; + + u16 tx_done_idx; + u16 tx_idx; + volatile u16 tx_free_idx; /* idx of free desc chain */ + u16 tx_intr_idx; + + atomic_t nr_tx_skbs; + struct sk_buff *tx_skbs[NR_TX_DESC]; + + char pad[16] __attribute__((aligned(16))); + __le32 *tx_descs; + dma_addr_t tx_phy_descs; + + struct timer_list tx_watchdog; +}; + +static inline struct ns83820 *PRIV(struct net_device *dev) +{ + return netdev_priv(dev); +} + +#define __kick_rx(dev) writel(CR_RXE, dev->base + CR) + +static inline void kick_rx(struct net_device *ndev) +{ + struct ns83820 *dev = PRIV(ndev); + dprintk("kick_rx: maybe kicking\n"); + if (test_and_clear_bit(0, &dev->rx_info.idle)) { + dprintk("actually kicking\n"); + writel(dev->rx_info.phy_descs + + (4 * DESC_SIZE * dev->rx_info.next_rx), + dev->base + RXDP); + if (dev->rx_info.next_rx == dev->rx_info.next_empty) + printk(KERN_DEBUG "%s: uh-oh: next_rx == next_empty???\n", + ndev->name); + __kick_rx(dev); + } +} + +//free = (tx_done_idx + NR_TX_DESC-2 - free_idx) % NR_TX_DESC +#define start_tx_okay(dev) \ + (((NR_TX_DESC-2 + dev->tx_done_idx - dev->tx_free_idx) % NR_TX_DESC) > MIN_TX_DESC_FREE) + +/* Packet Receiver + * + * The hardware supports linked lists of receive descriptors for + * which ownership is transferred back and forth by means of an + * ownership bit. While the hardware does support the use of a + * ring for receive descriptors, we only make use of a chain in + * an attempt to reduce bus traffic under heavy load scenarios. + * This will also make bugs a bit more obvious. The current code + * only makes use of a single rx chain; I hope to implement + * priority based rx for version 1.0. Goal: even under overload + * conditions, still route realtime traffic with as low jitter as + * possible. + */ +static inline void build_rx_desc(struct ns83820 *dev, __le32 *desc, dma_addr_t link, dma_addr_t buf, u32 cmdsts, u32 extsts) +{ + desc_addr_set(desc + DESC_LINK, link); + desc_addr_set(desc + DESC_BUFPTR, buf); + desc[DESC_EXTSTS] = cpu_to_le32(extsts); + mb(); + desc[DESC_CMDSTS] = cpu_to_le32(cmdsts); +} + +#define nr_rx_empty(dev) ((NR_RX_DESC-2 + dev->rx_info.next_rx - dev->rx_info.next_empty) % NR_RX_DESC) +static inline int ns83820_add_rx_skb(struct ns83820 *dev, struct sk_buff *skb) +{ + unsigned next_empty; + u32 cmdsts; + __le32 *sg; + dma_addr_t buf; + + next_empty = dev->rx_info.next_empty; + + /* don't overrun last rx marker */ + if (unlikely(nr_rx_empty(dev) <= 2)) { + kfree_skb(skb); + return 1; + } + +#if 0 + dprintk("next_empty[%d] nr_used[%d] next_rx[%d]\n", + dev->rx_info.next_empty, + dev->rx_info.nr_used, + dev->rx_info.next_rx + ); +#endif + + sg = dev->rx_info.descs + (next_empty * DESC_SIZE); + BUG_ON(NULL != dev->rx_info.skbs[next_empty]); + dev->rx_info.skbs[next_empty] = skb; + + dev->rx_info.next_empty = (next_empty + 1) % NR_RX_DESC; + cmdsts = REAL_RX_BUF_SIZE | CMDSTS_INTR; + buf = pci_map_single(dev->pci_dev, skb->data, + REAL_RX_BUF_SIZE, PCI_DMA_FROMDEVICE); + build_rx_desc(dev, sg, 0, buf, cmdsts, 0); + /* update link of previous rx */ + if (likely(next_empty != dev->rx_info.next_rx)) + dev->rx_info.descs[((NR_RX_DESC + next_empty - 1) % NR_RX_DESC) * DESC_SIZE] = cpu_to_le32(dev->rx_info.phy_descs + (next_empty * DESC_SIZE * 4)); + + return 0; +} + +static inline int rx_refill(struct net_device *ndev, gfp_t gfp) +{ + struct ns83820 *dev = PRIV(ndev); + unsigned i; + unsigned long flags = 0; + + if (unlikely(nr_rx_empty(dev) <= 2)) + return 0; + + dprintk("rx_refill(%p)\n", ndev); + if (gfp == GFP_ATOMIC) + spin_lock_irqsave(&dev->rx_info.lock, flags); + for (i=0; idata - PTR_ALIGN(skb->data, 16)); + if (gfp != GFP_ATOMIC) + spin_lock_irqsave(&dev->rx_info.lock, flags); + res = ns83820_add_rx_skb(dev, skb); + if (gfp != GFP_ATOMIC) + spin_unlock_irqrestore(&dev->rx_info.lock, flags); + if (res) { + i = 1; + break; + } + } + if (gfp == GFP_ATOMIC) + spin_unlock_irqrestore(&dev->rx_info.lock, flags); + + return i ? 0 : -ENOMEM; +} + +static void rx_refill_atomic(struct net_device *ndev) +{ + rx_refill(ndev, GFP_ATOMIC); +} + +/* REFILL */ +static inline void queue_refill(struct work_struct *work) +{ + struct ns83820 *dev = container_of(work, struct ns83820, tq_refill); + struct net_device *ndev = dev->ndev; + + rx_refill(ndev, GFP_KERNEL); + if (dev->rx_info.up) + kick_rx(ndev); +} + +static inline void clear_rx_desc(struct ns83820 *dev, unsigned i) +{ + build_rx_desc(dev, dev->rx_info.descs + (DESC_SIZE * i), 0, 0, CMDSTS_OWN, 0); +} + +static void phy_intr(struct net_device *ndev) +{ + struct ns83820 *dev = PRIV(ndev); + static const char *speeds[] = { "10", "100", "1000", "1000(?)", "1000F" }; + u32 cfg, new_cfg; + u32 tbisr, tanar, tanlpar; + int speed, fullduplex, newlinkstate; + + cfg = readl(dev->base + CFG) ^ SPDSTS_POLARITY; + + if (dev->CFG_cache & CFG_TBI_EN) { + /* we have an optical transceiver */ + tbisr = readl(dev->base + TBISR); + tanar = readl(dev->base + TANAR); + tanlpar = readl(dev->base + TANLPAR); + dprintk("phy_intr: tbisr=%08x, tanar=%08x, tanlpar=%08x\n", + tbisr, tanar, tanlpar); + + if ( (fullduplex = (tanlpar & TANAR_FULL_DUP) && + (tanar & TANAR_FULL_DUP)) ) { + + /* both of us are full duplex */ + writel(readl(dev->base + TXCFG) + | TXCFG_CSI | TXCFG_HBI | TXCFG_ATP, + dev->base + TXCFG); + writel(readl(dev->base + RXCFG) | RXCFG_RX_FD, + dev->base + RXCFG); + /* Light up full duplex LED */ + writel(readl(dev->base + GPIOR) | GPIOR_GP1_OUT, + dev->base + GPIOR); + + } else if (((tanlpar & TANAR_HALF_DUP) && + (tanar & TANAR_HALF_DUP)) || + ((tanlpar & TANAR_FULL_DUP) && + (tanar & TANAR_HALF_DUP)) || + ((tanlpar & TANAR_HALF_DUP) && + (tanar & TANAR_FULL_DUP))) { + + /* one or both of us are half duplex */ + writel((readl(dev->base + TXCFG) + & ~(TXCFG_CSI | TXCFG_HBI)) | TXCFG_ATP, + dev->base + TXCFG); + writel(readl(dev->base + RXCFG) & ~RXCFG_RX_FD, + dev->base + RXCFG); + /* Turn off full duplex LED */ + writel(readl(dev->base + GPIOR) & ~GPIOR_GP1_OUT, + dev->base + GPIOR); + } + + speed = 4; /* 1000F */ + + } else { + /* we have a copper transceiver */ + new_cfg = dev->CFG_cache & ~(CFG_SB | CFG_MODE_1000 | CFG_SPDSTS); + + if (cfg & CFG_SPDSTS1) + new_cfg |= CFG_MODE_1000; + else + new_cfg &= ~CFG_MODE_1000; + + speed = ((cfg / CFG_SPDSTS0) & 3); + fullduplex = (cfg & CFG_DUPSTS); + + if (fullduplex) { + new_cfg |= CFG_SB; + writel(readl(dev->base + TXCFG) + | TXCFG_CSI | TXCFG_HBI, + dev->base + TXCFG); + writel(readl(dev->base + RXCFG) | RXCFG_RX_FD, + dev->base + RXCFG); + } else { + writel(readl(dev->base + TXCFG) + & ~(TXCFG_CSI | TXCFG_HBI), + dev->base + TXCFG); + writel(readl(dev->base + RXCFG) & ~(RXCFG_RX_FD), + dev->base + RXCFG); + } + + if ((cfg & CFG_LNKSTS) && + ((new_cfg ^ dev->CFG_cache) != 0)) { + writel(new_cfg, dev->base + CFG); + dev->CFG_cache = new_cfg; + } + + dev->CFG_cache &= ~CFG_SPDSTS; + dev->CFG_cache |= cfg & CFG_SPDSTS; + } + + newlinkstate = (cfg & CFG_LNKSTS) ? LINK_UP : LINK_DOWN; + + if (newlinkstate & LINK_UP && + dev->linkstate != newlinkstate) { + netif_start_queue(ndev); + netif_wake_queue(ndev); + printk(KERN_INFO "%s: link now %s mbps, %s duplex and up.\n", + ndev->name, + speeds[speed], + fullduplex ? "full" : "half"); + } else if (newlinkstate & LINK_DOWN && + dev->linkstate != newlinkstate) { + netif_stop_queue(ndev); + printk(KERN_INFO "%s: link now down.\n", ndev->name); + } + + dev->linkstate = newlinkstate; +} + +static int ns83820_setup_rx(struct net_device *ndev) +{ + struct ns83820 *dev = PRIV(ndev); + unsigned i; + int ret; + + dprintk("ns83820_setup_rx(%p)\n", ndev); + + dev->rx_info.idle = 1; + dev->rx_info.next_rx = 0; + dev->rx_info.next_rx_desc = dev->rx_info.descs; + dev->rx_info.next_empty = 0; + + for (i=0; ibase + RXDP_HI); + writel(dev->rx_info.phy_descs, dev->base + RXDP); + + ret = rx_refill(ndev, GFP_KERNEL); + if (!ret) { + dprintk("starting receiver\n"); + /* prevent the interrupt handler from stomping on us */ + spin_lock_irq(&dev->rx_info.lock); + + writel(0x0001, dev->base + CCSR); + writel(0, dev->base + RFCR); + writel(0x7fc00000, dev->base + RFCR); + writel(0xffc00000, dev->base + RFCR); + + dev->rx_info.up = 1; + + phy_intr(ndev); + + /* Okay, let it rip */ + spin_lock(&dev->misc_lock); + dev->IMR_cache |= ISR_PHY; + dev->IMR_cache |= ISR_RXRCMP; + //dev->IMR_cache |= ISR_RXERR; + //dev->IMR_cache |= ISR_RXOK; + dev->IMR_cache |= ISR_RXORN; + dev->IMR_cache |= ISR_RXSOVR; + dev->IMR_cache |= ISR_RXDESC; + dev->IMR_cache |= ISR_RXIDLE; + dev->IMR_cache |= ISR_TXDESC; + dev->IMR_cache |= ISR_TXIDLE; + + writel(dev->IMR_cache, dev->base + IMR); + writel(1, dev->base + IER); + spin_unlock(&dev->misc_lock); + + kick_rx(ndev); + + spin_unlock_irq(&dev->rx_info.lock); + } + return ret; +} + +static void ns83820_cleanup_rx(struct ns83820 *dev) +{ + unsigned i; + unsigned long flags; + + dprintk("ns83820_cleanup_rx(%p)\n", dev); + + /* disable receive interrupts */ + spin_lock_irqsave(&dev->misc_lock, flags); + dev->IMR_cache &= ~(ISR_RXOK | ISR_RXDESC | ISR_RXERR | ISR_RXEARLY | ISR_RXIDLE); + writel(dev->IMR_cache, dev->base + IMR); + spin_unlock_irqrestore(&dev->misc_lock, flags); + + /* synchronize with the interrupt handler and kill it */ + dev->rx_info.up = 0; + synchronize_irq(dev->pci_dev->irq); + + /* touch the pci bus... */ + readl(dev->base + IMR); + + /* assumes the transmitter is already disabled and reset */ + writel(0, dev->base + RXDP_HI); + writel(0, dev->base + RXDP); + + for (i=0; irx_info.skbs[i]; + dev->rx_info.skbs[i] = NULL; + clear_rx_desc(dev, i); + kfree_skb(skb); + } +} + +static void ns83820_rx_kick(struct net_device *ndev) +{ + struct ns83820 *dev = PRIV(ndev); + /*if (nr_rx_empty(dev) >= NR_RX_DESC/4)*/ { + if (dev->rx_info.up) { + rx_refill_atomic(ndev); + kick_rx(ndev); + } + } + + if (dev->rx_info.up && nr_rx_empty(dev) > NR_RX_DESC*3/4) + schedule_work(&dev->tq_refill); + else + kick_rx(ndev); + if (dev->rx_info.idle) + printk(KERN_DEBUG "%s: BAD\n", ndev->name); +} + +/* rx_irq + * + */ +static void rx_irq(struct net_device *ndev) +{ + struct ns83820 *dev = PRIV(ndev); + struct rx_info *info = &dev->rx_info; + unsigned next_rx; + int rx_rc, len; + u32 cmdsts; + __le32 *desc; + unsigned long flags; + int nr = 0; + + dprintk("rx_irq(%p)\n", ndev); + dprintk("rxdp: %08x, descs: %08lx next_rx[%d]: %p next_empty[%d]: %p\n", + readl(dev->base + RXDP), + (long)(dev->rx_info.phy_descs), + (int)dev->rx_info.next_rx, + (dev->rx_info.descs + (DESC_SIZE * dev->rx_info.next_rx)), + (int)dev->rx_info.next_empty, + (dev->rx_info.descs + (DESC_SIZE * dev->rx_info.next_empty)) + ); + + spin_lock_irqsave(&info->lock, flags); + if (!info->up) + goto out; + + dprintk("walking descs\n"); + next_rx = info->next_rx; + desc = info->next_rx_desc; + while ((CMDSTS_OWN & (cmdsts = le32_to_cpu(desc[DESC_CMDSTS]))) && + (cmdsts != CMDSTS_OWN)) { + struct sk_buff *skb; + u32 extsts = le32_to_cpu(desc[DESC_EXTSTS]); + dma_addr_t bufptr = desc_addr_get(desc + DESC_BUFPTR); + + dprintk("cmdsts: %08x\n", cmdsts); + dprintk("link: %08x\n", cpu_to_le32(desc[DESC_LINK])); + dprintk("extsts: %08x\n", extsts); + + skb = info->skbs[next_rx]; + info->skbs[next_rx] = NULL; + info->next_rx = (next_rx + 1) % NR_RX_DESC; + + mb(); + clear_rx_desc(dev, next_rx); + + pci_unmap_single(dev->pci_dev, bufptr, + RX_BUF_SIZE, PCI_DMA_FROMDEVICE); + len = cmdsts & CMDSTS_LEN_MASK; +#ifdef NS83820_VLAN_ACCEL_SUPPORT + /* NH: As was mentioned below, this chip is kinda + * brain dead about vlan tag stripping. Frames + * that are 64 bytes with a vlan header appended + * like arp frames, or pings, are flagged as Runts + * when the tag is stripped and hardware. This + * also means that the OK bit in the descriptor + * is cleared when the frame comes in so we have + * to do a specific length check here to make sure + * the frame would have been ok, had we not stripped + * the tag. + */ + if (likely((CMDSTS_OK & cmdsts) || + ((cmdsts & CMDSTS_RUNT) && len >= 56))) { +#else + if (likely(CMDSTS_OK & cmdsts)) { +#endif + skb_put(skb, len); + if (unlikely(!skb)) + goto netdev_mangle_me_harder_failed; + if (cmdsts & CMDSTS_DEST_MULTI) + ndev->stats.multicast++; + ndev->stats.rx_packets++; + ndev->stats.rx_bytes += len; + if ((extsts & 0x002a0000) && !(extsts & 0x00540000)) { + skb->ip_summed = CHECKSUM_UNNECESSARY; + } else { + skb_checksum_none_assert(skb); + } + skb->protocol = eth_type_trans(skb, ndev); +#ifdef NS83820_VLAN_ACCEL_SUPPORT + if(extsts & EXTSTS_VPKT) { + unsigned short tag; + + tag = ntohs(extsts & EXTSTS_VTG_MASK); + __vlan_hwaccel_put_tag(skb, tag); + } +#endif + rx_rc = netif_rx(skb); + if (NET_RX_DROP == rx_rc) { +netdev_mangle_me_harder_failed: + ndev->stats.rx_dropped++; + } + } else { + kfree_skb(skb); + } + + nr++; + next_rx = info->next_rx; + desc = info->descs + (DESC_SIZE * next_rx); + } + info->next_rx = next_rx; + info->next_rx_desc = info->descs + (DESC_SIZE * next_rx); + +out: + if (0 && !nr) { + Dprintk("dazed: cmdsts_f: %08x\n", cmdsts); + } + + spin_unlock_irqrestore(&info->lock, flags); +} + +static void rx_action(unsigned long _dev) +{ + struct net_device *ndev = (void *)_dev; + struct ns83820 *dev = PRIV(ndev); + rx_irq(ndev); + writel(ihr, dev->base + IHR); + + spin_lock_irq(&dev->misc_lock); + dev->IMR_cache |= ISR_RXDESC; + writel(dev->IMR_cache, dev->base + IMR); + spin_unlock_irq(&dev->misc_lock); + + rx_irq(ndev); + ns83820_rx_kick(ndev); +} + +/* Packet Transmit code + */ +static inline void kick_tx(struct ns83820 *dev) +{ + dprintk("kick_tx(%p): tx_idx=%d free_idx=%d\n", + dev, dev->tx_idx, dev->tx_free_idx); + writel(CR_TXE, dev->base + CR); +} + +/* No spinlock needed on the transmit irq path as the interrupt handler is + * serialized. + */ +static void do_tx_done(struct net_device *ndev) +{ + struct ns83820 *dev = PRIV(ndev); + u32 cmdsts, tx_done_idx; + __le32 *desc; + + dprintk("do_tx_done(%p)\n", ndev); + tx_done_idx = dev->tx_done_idx; + desc = dev->tx_descs + (tx_done_idx * DESC_SIZE); + + dprintk("tx_done_idx=%d free_idx=%d cmdsts=%08x\n", + tx_done_idx, dev->tx_free_idx, le32_to_cpu(desc[DESC_CMDSTS])); + while ((tx_done_idx != dev->tx_free_idx) && + !(CMDSTS_OWN & (cmdsts = le32_to_cpu(desc[DESC_CMDSTS]))) ) { + struct sk_buff *skb; + unsigned len; + dma_addr_t addr; + + if (cmdsts & CMDSTS_ERR) + ndev->stats.tx_errors++; + if (cmdsts & CMDSTS_OK) + ndev->stats.tx_packets++; + if (cmdsts & CMDSTS_OK) + ndev->stats.tx_bytes += cmdsts & 0xffff; + + dprintk("tx_done_idx=%d free_idx=%d cmdsts=%08x\n", + tx_done_idx, dev->tx_free_idx, cmdsts); + skb = dev->tx_skbs[tx_done_idx]; + dev->tx_skbs[tx_done_idx] = NULL; + dprintk("done(%p)\n", skb); + + len = cmdsts & CMDSTS_LEN_MASK; + addr = desc_addr_get(desc + DESC_BUFPTR); + if (skb) { + pci_unmap_single(dev->pci_dev, + addr, + len, + PCI_DMA_TODEVICE); + dev_kfree_skb_irq(skb); + atomic_dec(&dev->nr_tx_skbs); + } else + pci_unmap_page(dev->pci_dev, + addr, + len, + PCI_DMA_TODEVICE); + + tx_done_idx = (tx_done_idx + 1) % NR_TX_DESC; + dev->tx_done_idx = tx_done_idx; + desc[DESC_CMDSTS] = cpu_to_le32(0); + mb(); + desc = dev->tx_descs + (tx_done_idx * DESC_SIZE); + } + + /* Allow network stack to resume queueing packets after we've + * finished transmitting at least 1/4 of the packets in the queue. + */ + if (netif_queue_stopped(ndev) && start_tx_okay(dev)) { + dprintk("start_queue(%p)\n", ndev); + netif_start_queue(ndev); + netif_wake_queue(ndev); + } +} + +static void ns83820_cleanup_tx(struct ns83820 *dev) +{ + unsigned i; + + for (i=0; itx_skbs[i]; + dev->tx_skbs[i] = NULL; + if (skb) { + __le32 *desc = dev->tx_descs + (i * DESC_SIZE); + pci_unmap_single(dev->pci_dev, + desc_addr_get(desc + DESC_BUFPTR), + le32_to_cpu(desc[DESC_CMDSTS]) & CMDSTS_LEN_MASK, + PCI_DMA_TODEVICE); + dev_kfree_skb_irq(skb); + atomic_dec(&dev->nr_tx_skbs); + } + } + + memset(dev->tx_descs, 0, NR_TX_DESC * DESC_SIZE * 4); +} + +/* transmit routine. This code relies on the network layer serializing + * its calls in, but will run happily in parallel with the interrupt + * handler. This code currently has provisions for fragmenting tx buffers + * while trying to track down a bug in either the zero copy code or + * the tx fifo (hence the MAX_FRAG_LEN). + */ +static netdev_tx_t ns83820_hard_start_xmit(struct sk_buff *skb, + struct net_device *ndev) +{ + struct ns83820 *dev = PRIV(ndev); + u32 free_idx, cmdsts, extsts; + int nr_free, nr_frags; + unsigned tx_done_idx, last_idx; + dma_addr_t buf; + unsigned len; + skb_frag_t *frag; + int stopped = 0; + int do_intr = 0; + volatile __le32 *first_desc; + + dprintk("ns83820_hard_start_xmit\n"); + + nr_frags = skb_shinfo(skb)->nr_frags; +again: + if (unlikely(dev->CFG_cache & CFG_LNKSTS)) { + netif_stop_queue(ndev); + if (unlikely(dev->CFG_cache & CFG_LNKSTS)) + return NETDEV_TX_BUSY; + netif_start_queue(ndev); + } + + last_idx = free_idx = dev->tx_free_idx; + tx_done_idx = dev->tx_done_idx; + nr_free = (tx_done_idx + NR_TX_DESC-2 - free_idx) % NR_TX_DESC; + nr_free -= 1; + if (nr_free <= nr_frags) { + dprintk("stop_queue - not enough(%p)\n", ndev); + netif_stop_queue(ndev); + + /* Check again: we may have raced with a tx done irq */ + if (dev->tx_done_idx != tx_done_idx) { + dprintk("restart queue(%p)\n", ndev); + netif_start_queue(ndev); + goto again; + } + return NETDEV_TX_BUSY; + } + + if (free_idx == dev->tx_intr_idx) { + do_intr = 1; + dev->tx_intr_idx = (dev->tx_intr_idx + NR_TX_DESC/4) % NR_TX_DESC; + } + + nr_free -= nr_frags; + if (nr_free < MIN_TX_DESC_FREE) { + dprintk("stop_queue - last entry(%p)\n", ndev); + netif_stop_queue(ndev); + stopped = 1; + } + + frag = skb_shinfo(skb)->frags; + if (!nr_frags) + frag = NULL; + extsts = 0; + if (skb->ip_summed == CHECKSUM_PARTIAL) { + extsts |= EXTSTS_IPPKT; + if (IPPROTO_TCP == ip_hdr(skb)->protocol) + extsts |= EXTSTS_TCPPKT; + else if (IPPROTO_UDP == ip_hdr(skb)->protocol) + extsts |= EXTSTS_UDPPKT; + } + +#ifdef NS83820_VLAN_ACCEL_SUPPORT + if(vlan_tx_tag_present(skb)) { + /* fetch the vlan tag info out of the + * ancillary data if the vlan code + * is using hw vlan acceleration + */ + short tag = vlan_tx_tag_get(skb); + extsts |= (EXTSTS_VPKT | htons(tag)); + } +#endif + + len = skb->len; + if (nr_frags) + len -= skb->data_len; + buf = pci_map_single(dev->pci_dev, skb->data, len, PCI_DMA_TODEVICE); + + first_desc = dev->tx_descs + (free_idx * DESC_SIZE); + + for (;;) { + volatile __le32 *desc = dev->tx_descs + (free_idx * DESC_SIZE); + + dprintk("frag[%3u]: %4u @ 0x%08Lx\n", free_idx, len, + (unsigned long long)buf); + last_idx = free_idx; + free_idx = (free_idx + 1) % NR_TX_DESC; + desc[DESC_LINK] = cpu_to_le32(dev->tx_phy_descs + (free_idx * DESC_SIZE * 4)); + desc_addr_set(desc + DESC_BUFPTR, buf); + desc[DESC_EXTSTS] = cpu_to_le32(extsts); + + cmdsts = ((nr_frags) ? CMDSTS_MORE : do_intr ? CMDSTS_INTR : 0); + cmdsts |= (desc == first_desc) ? 0 : CMDSTS_OWN; + cmdsts |= len; + desc[DESC_CMDSTS] = cpu_to_le32(cmdsts); + + if (!nr_frags) + break; + + buf = pci_map_page(dev->pci_dev, frag->page, + frag->page_offset, + frag->size, PCI_DMA_TODEVICE); + dprintk("frag: buf=%08Lx page=%08lx offset=%08lx\n", + (long long)buf, (long) page_to_pfn(frag->page), + frag->page_offset); + len = frag->size; + frag++; + nr_frags--; + } + dprintk("done pkt\n"); + + spin_lock_irq(&dev->tx_lock); + dev->tx_skbs[last_idx] = skb; + first_desc[DESC_CMDSTS] |= cpu_to_le32(CMDSTS_OWN); + dev->tx_free_idx = free_idx; + atomic_inc(&dev->nr_tx_skbs); + spin_unlock_irq(&dev->tx_lock); + + kick_tx(dev); + + /* Check again: we may have raced with a tx done irq */ + if (stopped && (dev->tx_done_idx != tx_done_idx) && start_tx_okay(dev)) + netif_start_queue(ndev); + + return NETDEV_TX_OK; +} + +static void ns83820_update_stats(struct ns83820 *dev) +{ + struct net_device *ndev = dev->ndev; + u8 __iomem *base = dev->base; + + /* the DP83820 will freeze counters, so we need to read all of them */ + ndev->stats.rx_errors += readl(base + 0x60) & 0xffff; + ndev->stats.rx_crc_errors += readl(base + 0x64) & 0xffff; + ndev->stats.rx_missed_errors += readl(base + 0x68) & 0xffff; + ndev->stats.rx_frame_errors += readl(base + 0x6c) & 0xffff; + /*ndev->stats.rx_symbol_errors +=*/ readl(base + 0x70); + ndev->stats.rx_length_errors += readl(base + 0x74) & 0xffff; + ndev->stats.rx_length_errors += readl(base + 0x78) & 0xffff; + /*ndev->stats.rx_badopcode_errors += */ readl(base + 0x7c); + /*ndev->stats.rx_pause_count += */ readl(base + 0x80); + /*ndev->stats.tx_pause_count += */ readl(base + 0x84); + ndev->stats.tx_carrier_errors += readl(base + 0x88) & 0xff; +} + +static struct net_device_stats *ns83820_get_stats(struct net_device *ndev) +{ + struct ns83820 *dev = PRIV(ndev); + + /* somewhat overkill */ + spin_lock_irq(&dev->misc_lock); + ns83820_update_stats(dev); + spin_unlock_irq(&dev->misc_lock); + + return &ndev->stats; +} + +/* Let ethtool retrieve info */ +static int ns83820_get_settings(struct net_device *ndev, + struct ethtool_cmd *cmd) +{ + struct ns83820 *dev = PRIV(ndev); + u32 cfg, tanar, tbicr; + int fullduplex = 0; + + /* + * Here's the list of available ethtool commands from other drivers: + * cmd->advertising = + * ethtool_cmd_speed_set(cmd, ...) + * cmd->duplex = + * cmd->port = 0; + * cmd->phy_address = + * cmd->transceiver = 0; + * cmd->autoneg = + * cmd->maxtxpkt = 0; + * cmd->maxrxpkt = 0; + */ + + /* read current configuration */ + cfg = readl(dev->base + CFG) ^ SPDSTS_POLARITY; + tanar = readl(dev->base + TANAR); + tbicr = readl(dev->base + TBICR); + + fullduplex = (cfg & CFG_DUPSTS) ? 1 : 0; + + cmd->supported = SUPPORTED_Autoneg; + + if (dev->CFG_cache & CFG_TBI_EN) { + /* we have optical interface */ + cmd->supported |= SUPPORTED_1000baseT_Half | + SUPPORTED_1000baseT_Full | + SUPPORTED_FIBRE; + cmd->port = PORT_FIBRE; + } else { + /* we have copper */ + cmd->supported |= SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | SUPPORTED_1000baseT_Half | + SUPPORTED_1000baseT_Full | + SUPPORTED_MII; + cmd->port = PORT_MII; + } + + cmd->duplex = fullduplex ? DUPLEX_FULL : DUPLEX_HALF; + switch (cfg / CFG_SPDSTS0 & 3) { + case 2: + ethtool_cmd_speed_set(cmd, SPEED_1000); + break; + case 1: + ethtool_cmd_speed_set(cmd, SPEED_100); + break; + default: + ethtool_cmd_speed_set(cmd, SPEED_10); + break; + } + cmd->autoneg = (tbicr & TBICR_MR_AN_ENABLE) + ? AUTONEG_ENABLE : AUTONEG_DISABLE; + return 0; +} + +/* Let ethool change settings*/ +static int ns83820_set_settings(struct net_device *ndev, + struct ethtool_cmd *cmd) +{ + struct ns83820 *dev = PRIV(ndev); + u32 cfg, tanar; + int have_optical = 0; + int fullduplex = 0; + + /* read current configuration */ + cfg = readl(dev->base + CFG) ^ SPDSTS_POLARITY; + tanar = readl(dev->base + TANAR); + + if (dev->CFG_cache & CFG_TBI_EN) { + /* we have optical */ + have_optical = 1; + fullduplex = (tanar & TANAR_FULL_DUP); + + } else { + /* we have copper */ + fullduplex = cfg & CFG_DUPSTS; + } + + spin_lock_irq(&dev->misc_lock); + spin_lock(&dev->tx_lock); + + /* Set duplex */ + if (cmd->duplex != fullduplex) { + if (have_optical) { + /*set full duplex*/ + if (cmd->duplex == DUPLEX_FULL) { + /* force full duplex */ + writel(readl(dev->base + TXCFG) + | TXCFG_CSI | TXCFG_HBI | TXCFG_ATP, + dev->base + TXCFG); + writel(readl(dev->base + RXCFG) | RXCFG_RX_FD, + dev->base + RXCFG); + /* Light up full duplex LED */ + writel(readl(dev->base + GPIOR) | GPIOR_GP1_OUT, + dev->base + GPIOR); + } else { + /*TODO: set half duplex */ + } + + } else { + /*we have copper*/ + /* TODO: Set duplex for copper cards */ + } + printk(KERN_INFO "%s: Duplex set via ethtool\n", + ndev->name); + } + + /* Set autonegotiation */ + if (1) { + if (cmd->autoneg == AUTONEG_ENABLE) { + /* restart auto negotiation */ + writel(TBICR_MR_AN_ENABLE | TBICR_MR_RESTART_AN, + dev->base + TBICR); + writel(TBICR_MR_AN_ENABLE, dev->base + TBICR); + dev->linkstate = LINK_AUTONEGOTIATE; + + printk(KERN_INFO "%s: autoneg enabled via ethtool\n", + ndev->name); + } else { + /* disable auto negotiation */ + writel(0x00000000, dev->base + TBICR); + } + + printk(KERN_INFO "%s: autoneg %s via ethtool\n", ndev->name, + cmd->autoneg ? "ENABLED" : "DISABLED"); + } + + phy_intr(ndev); + spin_unlock(&dev->tx_lock); + spin_unlock_irq(&dev->misc_lock); + + return 0; +} +/* end ethtool get/set support -df */ + +static void ns83820_get_drvinfo(struct net_device *ndev, struct ethtool_drvinfo *info) +{ + struct ns83820 *dev = PRIV(ndev); + strcpy(info->driver, "ns83820"); + strcpy(info->version, VERSION); + strcpy(info->bus_info, pci_name(dev->pci_dev)); +} + +static u32 ns83820_get_link(struct net_device *ndev) +{ + struct ns83820 *dev = PRIV(ndev); + u32 cfg = readl(dev->base + CFG) ^ SPDSTS_POLARITY; + return cfg & CFG_LNKSTS ? 1 : 0; +} + +static const struct ethtool_ops ops = { + .get_settings = ns83820_get_settings, + .set_settings = ns83820_set_settings, + .get_drvinfo = ns83820_get_drvinfo, + .get_link = ns83820_get_link +}; + +static inline void ns83820_disable_interrupts(struct ns83820 *dev) +{ + writel(0, dev->base + IMR); + writel(0, dev->base + IER); + readl(dev->base + IER); +} + +/* this function is called in irq context from the ISR */ +static void ns83820_mib_isr(struct ns83820 *dev) +{ + unsigned long flags; + spin_lock_irqsave(&dev->misc_lock, flags); + ns83820_update_stats(dev); + spin_unlock_irqrestore(&dev->misc_lock, flags); +} + +static void ns83820_do_isr(struct net_device *ndev, u32 isr); +static irqreturn_t ns83820_irq(int foo, void *data) +{ + struct net_device *ndev = data; + struct ns83820 *dev = PRIV(ndev); + u32 isr; + dprintk("ns83820_irq(%p)\n", ndev); + + dev->ihr = 0; + + isr = readl(dev->base + ISR); + dprintk("irq: %08x\n", isr); + ns83820_do_isr(ndev, isr); + return IRQ_HANDLED; +} + +static void ns83820_do_isr(struct net_device *ndev, u32 isr) +{ + struct ns83820 *dev = PRIV(ndev); + unsigned long flags; + +#ifdef DEBUG + if (isr & ~(ISR_PHY | ISR_RXDESC | ISR_RXEARLY | ISR_RXOK | ISR_RXERR | ISR_TXIDLE | ISR_TXOK | ISR_TXDESC)) + Dprintk("odd isr? 0x%08x\n", isr); +#endif + + if (ISR_RXIDLE & isr) { + dev->rx_info.idle = 1; + Dprintk("oh dear, we are idle\n"); + ns83820_rx_kick(ndev); + } + + if ((ISR_RXDESC | ISR_RXOK) & isr) { + prefetch(dev->rx_info.next_rx_desc); + + spin_lock_irqsave(&dev->misc_lock, flags); + dev->IMR_cache &= ~(ISR_RXDESC | ISR_RXOK); + writel(dev->IMR_cache, dev->base + IMR); + spin_unlock_irqrestore(&dev->misc_lock, flags); + + tasklet_schedule(&dev->rx_tasklet); + //rx_irq(ndev); + //writel(4, dev->base + IHR); + } + + if ((ISR_RXIDLE | ISR_RXORN | ISR_RXDESC | ISR_RXOK | ISR_RXERR) & isr) + ns83820_rx_kick(ndev); + + if (unlikely(ISR_RXSOVR & isr)) { + //printk("overrun: rxsovr\n"); + ndev->stats.rx_fifo_errors++; + } + + if (unlikely(ISR_RXORN & isr)) { + //printk("overrun: rxorn\n"); + ndev->stats.rx_fifo_errors++; + } + + if ((ISR_RXRCMP & isr) && dev->rx_info.up) + writel(CR_RXE, dev->base + CR); + + if (ISR_TXIDLE & isr) { + u32 txdp; + txdp = readl(dev->base + TXDP); + dprintk("txdp: %08x\n", txdp); + txdp -= dev->tx_phy_descs; + dev->tx_idx = txdp / (DESC_SIZE * 4); + if (dev->tx_idx >= NR_TX_DESC) { + printk(KERN_ALERT "%s: BUG -- txdp out of range\n", ndev->name); + dev->tx_idx = 0; + } + /* The may have been a race between a pci originated read + * and the descriptor update from the cpu. Just in case, + * kick the transmitter if the hardware thinks it is on a + * different descriptor than we are. + */ + if (dev->tx_idx != dev->tx_free_idx) + kick_tx(dev); + } + + /* Defer tx ring processing until more than a minimum amount of + * work has accumulated + */ + if ((ISR_TXDESC | ISR_TXIDLE | ISR_TXOK | ISR_TXERR) & isr) { + spin_lock_irqsave(&dev->tx_lock, flags); + do_tx_done(ndev); + spin_unlock_irqrestore(&dev->tx_lock, flags); + + /* Disable TxOk if there are no outstanding tx packets. + */ + if ((dev->tx_done_idx == dev->tx_free_idx) && + (dev->IMR_cache & ISR_TXOK)) { + spin_lock_irqsave(&dev->misc_lock, flags); + dev->IMR_cache &= ~ISR_TXOK; + writel(dev->IMR_cache, dev->base + IMR); + spin_unlock_irqrestore(&dev->misc_lock, flags); + } + } + + /* The TxIdle interrupt can come in before the transmit has + * completed. Normally we reap packets off of the combination + * of TxDesc and TxIdle and leave TxOk disabled (since it + * occurs on every packet), but when no further irqs of this + * nature are expected, we must enable TxOk. + */ + if ((ISR_TXIDLE & isr) && (dev->tx_done_idx != dev->tx_free_idx)) { + spin_lock_irqsave(&dev->misc_lock, flags); + dev->IMR_cache |= ISR_TXOK; + writel(dev->IMR_cache, dev->base + IMR); + spin_unlock_irqrestore(&dev->misc_lock, flags); + } + + /* MIB interrupt: one of the statistics counters is about to overflow */ + if (unlikely(ISR_MIB & isr)) + ns83820_mib_isr(dev); + + /* PHY: Link up/down/negotiation state change */ + if (unlikely(ISR_PHY & isr)) + phy_intr(ndev); + +#if 0 /* Still working on the interrupt mitigation strategy */ + if (dev->ihr) + writel(dev->ihr, dev->base + IHR); +#endif +} + +static void ns83820_do_reset(struct ns83820 *dev, u32 which) +{ + Dprintk("resetting chip...\n"); + writel(which, dev->base + CR); + do { + schedule(); + } while (readl(dev->base + CR) & which); + Dprintk("okay!\n"); +} + +static int ns83820_stop(struct net_device *ndev) +{ + struct ns83820 *dev = PRIV(ndev); + + /* FIXME: protect against interrupt handler? */ + del_timer_sync(&dev->tx_watchdog); + + ns83820_disable_interrupts(dev); + + dev->rx_info.up = 0; + synchronize_irq(dev->pci_dev->irq); + + ns83820_do_reset(dev, CR_RST); + + synchronize_irq(dev->pci_dev->irq); + + spin_lock_irq(&dev->misc_lock); + dev->IMR_cache &= ~(ISR_TXURN | ISR_TXIDLE | ISR_TXERR | ISR_TXDESC | ISR_TXOK); + spin_unlock_irq(&dev->misc_lock); + + ns83820_cleanup_rx(dev); + ns83820_cleanup_tx(dev); + + return 0; +} + +static void ns83820_tx_timeout(struct net_device *ndev) +{ + struct ns83820 *dev = PRIV(ndev); + u32 tx_done_idx; + __le32 *desc; + unsigned long flags; + + spin_lock_irqsave(&dev->tx_lock, flags); + + tx_done_idx = dev->tx_done_idx; + desc = dev->tx_descs + (tx_done_idx * DESC_SIZE); + + printk(KERN_INFO "%s: tx_timeout: tx_done_idx=%d free_idx=%d cmdsts=%08x\n", + ndev->name, + tx_done_idx, dev->tx_free_idx, le32_to_cpu(desc[DESC_CMDSTS])); + +#if defined(DEBUG) + { + u32 isr; + isr = readl(dev->base + ISR); + printk("irq: %08x imr: %08x\n", isr, dev->IMR_cache); + ns83820_do_isr(ndev, isr); + } +#endif + + do_tx_done(ndev); + + tx_done_idx = dev->tx_done_idx; + desc = dev->tx_descs + (tx_done_idx * DESC_SIZE); + + printk(KERN_INFO "%s: after: tx_done_idx=%d free_idx=%d cmdsts=%08x\n", + ndev->name, + tx_done_idx, dev->tx_free_idx, le32_to_cpu(desc[DESC_CMDSTS])); + + spin_unlock_irqrestore(&dev->tx_lock, flags); +} + +static void ns83820_tx_watch(unsigned long data) +{ + struct net_device *ndev = (void *)data; + struct ns83820 *dev = PRIV(ndev); + +#if defined(DEBUG) + printk("ns83820_tx_watch: %u %u %d\n", + dev->tx_done_idx, dev->tx_free_idx, atomic_read(&dev->nr_tx_skbs) + ); +#endif + + if (time_after(jiffies, dev_trans_start(ndev) + 1*HZ) && + dev->tx_done_idx != dev->tx_free_idx) { + printk(KERN_DEBUG "%s: ns83820_tx_watch: %u %u %d\n", + ndev->name, + dev->tx_done_idx, dev->tx_free_idx, + atomic_read(&dev->nr_tx_skbs)); + ns83820_tx_timeout(ndev); + } + + mod_timer(&dev->tx_watchdog, jiffies + 2*HZ); +} + +static int ns83820_open(struct net_device *ndev) +{ + struct ns83820 *dev = PRIV(ndev); + unsigned i; + u32 desc; + int ret; + + dprintk("ns83820_open\n"); + + writel(0, dev->base + PQCR); + + ret = ns83820_setup_rx(ndev); + if (ret) + goto failed; + + memset(dev->tx_descs, 0, 4 * NR_TX_DESC * DESC_SIZE); + for (i=0; itx_descs[(i * DESC_SIZE) + DESC_LINK] + = cpu_to_le32( + dev->tx_phy_descs + + ((i+1) % NR_TX_DESC) * DESC_SIZE * 4); + } + + dev->tx_idx = 0; + dev->tx_done_idx = 0; + desc = dev->tx_phy_descs; + writel(0, dev->base + TXDP_HI); + writel(desc, dev->base + TXDP); + + init_timer(&dev->tx_watchdog); + dev->tx_watchdog.data = (unsigned long)ndev; + dev->tx_watchdog.function = ns83820_tx_watch; + mod_timer(&dev->tx_watchdog, jiffies + 2*HZ); + + netif_start_queue(ndev); /* FIXME: wait for phy to come up */ + + return 0; + +failed: + ns83820_stop(ndev); + return ret; +} + +static void ns83820_getmac(struct ns83820 *dev, u8 *mac) +{ + unsigned i; + for (i=0; i<3; i++) { + u32 data; + + /* Read from the perfect match memory: this is loaded by + * the chip from the EEPROM via the EELOAD self test. + */ + writel(i*2, dev->base + RFCR); + data = readl(dev->base + RFDR); + + *mac++ = data; + *mac++ = data >> 8; + } +} + +static int ns83820_change_mtu(struct net_device *ndev, int new_mtu) +{ + if (new_mtu > RX_BUF_SIZE) + return -EINVAL; + ndev->mtu = new_mtu; + return 0; +} + +static void ns83820_set_multicast(struct net_device *ndev) +{ + struct ns83820 *dev = PRIV(ndev); + u8 __iomem *rfcr = dev->base + RFCR; + u32 and_mask = 0xffffffff; + u32 or_mask = 0; + u32 val; + + if (ndev->flags & IFF_PROMISC) + or_mask |= RFCR_AAU | RFCR_AAM; + else + and_mask &= ~(RFCR_AAU | RFCR_AAM); + + if (ndev->flags & IFF_ALLMULTI || netdev_mc_count(ndev)) + or_mask |= RFCR_AAM; + else + and_mask &= ~RFCR_AAM; + + spin_lock_irq(&dev->misc_lock); + val = (readl(rfcr) & and_mask) | or_mask; + /* Ramit : RFCR Write Fix doc says RFEN must be 0 modify other bits */ + writel(val & ~RFCR_RFEN, rfcr); + writel(val, rfcr); + spin_unlock_irq(&dev->misc_lock); +} + +static void ns83820_run_bist(struct net_device *ndev, const char *name, u32 enable, u32 done, u32 fail) +{ + struct ns83820 *dev = PRIV(ndev); + int timed_out = 0; + unsigned long start; + u32 status; + int loops = 0; + + dprintk("%s: start %s\n", ndev->name, name); + + start = jiffies; + + writel(enable, dev->base + PTSCR); + for (;;) { + loops++; + status = readl(dev->base + PTSCR); + if (!(status & enable)) + break; + if (status & done) + break; + if (status & fail) + break; + if (time_after_eq(jiffies, start + HZ)) { + timed_out = 1; + break; + } + schedule_timeout_uninterruptible(1); + } + + if (status & fail) + printk(KERN_INFO "%s: %s failed! (0x%08x & 0x%08x)\n", + ndev->name, name, status, fail); + else if (timed_out) + printk(KERN_INFO "%s: run_bist %s timed out! (%08x)\n", + ndev->name, name, status); + + dprintk("%s: done %s in %d loops\n", ndev->name, name, loops); +} + +#ifdef PHY_CODE_IS_FINISHED +static void ns83820_mii_write_bit(struct ns83820 *dev, int bit) +{ + /* drive MDC low */ + dev->MEAR_cache &= ~MEAR_MDC; + writel(dev->MEAR_cache, dev->base + MEAR); + readl(dev->base + MEAR); + + /* enable output, set bit */ + dev->MEAR_cache |= MEAR_MDDIR; + if (bit) + dev->MEAR_cache |= MEAR_MDIO; + else + dev->MEAR_cache &= ~MEAR_MDIO; + + /* set the output bit */ + writel(dev->MEAR_cache, dev->base + MEAR); + readl(dev->base + MEAR); + + /* Wait. Max clock rate is 2.5MHz, this way we come in under 1MHz */ + udelay(1); + + /* drive MDC high causing the data bit to be latched */ + dev->MEAR_cache |= MEAR_MDC; + writel(dev->MEAR_cache, dev->base + MEAR); + readl(dev->base + MEAR); + + /* Wait again... */ + udelay(1); +} + +static int ns83820_mii_read_bit(struct ns83820 *dev) +{ + int bit; + + /* drive MDC low, disable output */ + dev->MEAR_cache &= ~MEAR_MDC; + dev->MEAR_cache &= ~MEAR_MDDIR; + writel(dev->MEAR_cache, dev->base + MEAR); + readl(dev->base + MEAR); + + /* Wait. Max clock rate is 2.5MHz, this way we come in under 1MHz */ + udelay(1); + + /* drive MDC high causing the data bit to be latched */ + bit = (readl(dev->base + MEAR) & MEAR_MDIO) ? 1 : 0; + dev->MEAR_cache |= MEAR_MDC; + writel(dev->MEAR_cache, dev->base + MEAR); + + /* Wait again... */ + udelay(1); + + return bit; +} + +static unsigned ns83820_mii_read_reg(struct ns83820 *dev, unsigned phy, unsigned reg) +{ + unsigned data = 0; + int i; + + /* read some garbage so that we eventually sync up */ + for (i=0; i<64; i++) + ns83820_mii_read_bit(dev); + + ns83820_mii_write_bit(dev, 0); /* start */ + ns83820_mii_write_bit(dev, 1); + ns83820_mii_write_bit(dev, 1); /* opcode read */ + ns83820_mii_write_bit(dev, 0); + + /* write out the phy address: 5 bits, msb first */ + for (i=0; i<5; i++) + ns83820_mii_write_bit(dev, phy & (0x10 >> i)); + + /* write out the register address, 5 bits, msb first */ + for (i=0; i<5; i++) + ns83820_mii_write_bit(dev, reg & (0x10 >> i)); + + ns83820_mii_read_bit(dev); /* turn around cycles */ + ns83820_mii_read_bit(dev); + + /* read in the register data, 16 bits msb first */ + for (i=0; i<16; i++) { + data <<= 1; + data |= ns83820_mii_read_bit(dev); + } + + return data; +} + +static unsigned ns83820_mii_write_reg(struct ns83820 *dev, unsigned phy, unsigned reg, unsigned data) +{ + int i; + + /* read some garbage so that we eventually sync up */ + for (i=0; i<64; i++) + ns83820_mii_read_bit(dev); + + ns83820_mii_write_bit(dev, 0); /* start */ + ns83820_mii_write_bit(dev, 1); + ns83820_mii_write_bit(dev, 0); /* opcode read */ + ns83820_mii_write_bit(dev, 1); + + /* write out the phy address: 5 bits, msb first */ + for (i=0; i<5; i++) + ns83820_mii_write_bit(dev, phy & (0x10 >> i)); + + /* write out the register address, 5 bits, msb first */ + for (i=0; i<5; i++) + ns83820_mii_write_bit(dev, reg & (0x10 >> i)); + + ns83820_mii_read_bit(dev); /* turn around cycles */ + ns83820_mii_read_bit(dev); + + /* read in the register data, 16 bits msb first */ + for (i=0; i<16; i++) + ns83820_mii_write_bit(dev, (data >> (15 - i)) & 1); + + return data; +} + +static void ns83820_probe_phy(struct net_device *ndev) +{ + struct ns83820 *dev = PRIV(ndev); + static int first; + int i; +#define MII_PHYIDR1 0x02 +#define MII_PHYIDR2 0x03 + +#if 0 + if (!first) { + unsigned tmp; + ns83820_mii_read_reg(dev, 1, 0x09); + ns83820_mii_write_reg(dev, 1, 0x10, 0x0d3e); + + tmp = ns83820_mii_read_reg(dev, 1, 0x00); + ns83820_mii_write_reg(dev, 1, 0x00, tmp | 0x8000); + udelay(1300); + ns83820_mii_read_reg(dev, 1, 0x09); + } +#endif + first = 1; + + for (i=1; i<2; i++) { + int j; + unsigned a, b; + a = ns83820_mii_read_reg(dev, i, MII_PHYIDR1); + b = ns83820_mii_read_reg(dev, i, MII_PHYIDR2); + + //printk("%s: phy %d: 0x%04x 0x%04x\n", + // ndev->name, i, a, b); + + for (j=0; j<0x16; j+=4) { + dprintk("%s: [0x%02x] %04x %04x %04x %04x\n", + ndev->name, j, + ns83820_mii_read_reg(dev, i, 0 + j), + ns83820_mii_read_reg(dev, i, 1 + j), + ns83820_mii_read_reg(dev, i, 2 + j), + ns83820_mii_read_reg(dev, i, 3 + j) + ); + } + } + { + unsigned a, b; + /* read firmware version: memory addr is 0x8402 and 0x8403 */ + ns83820_mii_write_reg(dev, 1, 0x16, 0x000d); + ns83820_mii_write_reg(dev, 1, 0x1e, 0x810e); + a = ns83820_mii_read_reg(dev, 1, 0x1d); + + ns83820_mii_write_reg(dev, 1, 0x16, 0x000d); + ns83820_mii_write_reg(dev, 1, 0x1e, 0x810e); + b = ns83820_mii_read_reg(dev, 1, 0x1d); + dprintk("version: 0x%04x 0x%04x\n", a, b); + } +} +#endif + +static const struct net_device_ops netdev_ops = { + .ndo_open = ns83820_open, + .ndo_stop = ns83820_stop, + .ndo_start_xmit = ns83820_hard_start_xmit, + .ndo_get_stats = ns83820_get_stats, + .ndo_change_mtu = ns83820_change_mtu, + .ndo_set_multicast_list = ns83820_set_multicast, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = eth_mac_addr, + .ndo_tx_timeout = ns83820_tx_timeout, +}; + +static int __devinit ns83820_init_one(struct pci_dev *pci_dev, + const struct pci_device_id *id) +{ + struct net_device *ndev; + struct ns83820 *dev; + long addr; + int err; + int using_dac = 0; + + /* See if we can set the dma mask early on; failure is fatal. */ + if (sizeof(dma_addr_t) == 8 && + !pci_set_dma_mask(pci_dev, DMA_BIT_MASK(64))) { + using_dac = 1; + } else if (!pci_set_dma_mask(pci_dev, DMA_BIT_MASK(32))) { + using_dac = 0; + } else { + dev_warn(&pci_dev->dev, "pci_set_dma_mask failed!\n"); + return -ENODEV; + } + + ndev = alloc_etherdev(sizeof(struct ns83820)); + err = -ENOMEM; + if (!ndev) + goto out; + + dev = PRIV(ndev); + dev->ndev = ndev; + + spin_lock_init(&dev->rx_info.lock); + spin_lock_init(&dev->tx_lock); + spin_lock_init(&dev->misc_lock); + dev->pci_dev = pci_dev; + + SET_NETDEV_DEV(ndev, &pci_dev->dev); + + INIT_WORK(&dev->tq_refill, queue_refill); + tasklet_init(&dev->rx_tasklet, rx_action, (unsigned long)ndev); + + err = pci_enable_device(pci_dev); + if (err) { + dev_info(&pci_dev->dev, "pci_enable_dev failed: %d\n", err); + goto out_free; + } + + pci_set_master(pci_dev); + addr = pci_resource_start(pci_dev, 1); + dev->base = ioremap_nocache(addr, PAGE_SIZE); + dev->tx_descs = pci_alloc_consistent(pci_dev, + 4 * DESC_SIZE * NR_TX_DESC, &dev->tx_phy_descs); + dev->rx_info.descs = pci_alloc_consistent(pci_dev, + 4 * DESC_SIZE * NR_RX_DESC, &dev->rx_info.phy_descs); + err = -ENOMEM; + if (!dev->base || !dev->tx_descs || !dev->rx_info.descs) + goto out_disable; + + dprintk("%p: %08lx %p: %08lx\n", + dev->tx_descs, (long)dev->tx_phy_descs, + dev->rx_info.descs, (long)dev->rx_info.phy_descs); + + ns83820_disable_interrupts(dev); + + dev->IMR_cache = 0; + + err = request_irq(pci_dev->irq, ns83820_irq, IRQF_SHARED, + DRV_NAME, ndev); + if (err) { + dev_info(&pci_dev->dev, "unable to register irq %d, err %d\n", + pci_dev->irq, err); + goto out_disable; + } + + /* + * FIXME: we are holding rtnl_lock() over obscenely long area only + * because some of the setup code uses dev->name. It's Wrong(tm) - + * we should be using driver-specific names for all that stuff. + * For now that will do, but we really need to come back and kill + * most of the dev_alloc_name() users later. + */ + rtnl_lock(); + err = dev_alloc_name(ndev, ndev->name); + if (err < 0) { + dev_info(&pci_dev->dev, "unable to get netdev name: %d\n", err); + goto out_free_irq; + } + + printk("%s: ns83820.c: 0x22c: %08x, subsystem: %04x:%04x\n", + ndev->name, le32_to_cpu(readl(dev->base + 0x22c)), + pci_dev->subsystem_vendor, pci_dev->subsystem_device); + + ndev->netdev_ops = &netdev_ops; + SET_ETHTOOL_OPS(ndev, &ops); + ndev->watchdog_timeo = 5 * HZ; + pci_set_drvdata(pci_dev, ndev); + + ns83820_do_reset(dev, CR_RST); + + /* Must reset the ram bist before running it */ + writel(PTSCR_RBIST_RST, dev->base + PTSCR); + ns83820_run_bist(ndev, "sram bist", PTSCR_RBIST_EN, + PTSCR_RBIST_DONE, PTSCR_RBIST_FAIL); + ns83820_run_bist(ndev, "eeprom bist", PTSCR_EEBIST_EN, 0, + PTSCR_EEBIST_FAIL); + ns83820_run_bist(ndev, "eeprom load", PTSCR_EELOAD_EN, 0, 0); + + /* I love config registers */ + dev->CFG_cache = readl(dev->base + CFG); + + if ((dev->CFG_cache & CFG_PCI64_DET)) { + printk(KERN_INFO "%s: detected 64 bit PCI data bus.\n", + ndev->name); + /*dev->CFG_cache |= CFG_DATA64_EN;*/ + if (!(dev->CFG_cache & CFG_DATA64_EN)) + printk(KERN_INFO "%s: EEPROM did not enable 64 bit bus. Disabled.\n", + ndev->name); + } else + dev->CFG_cache &= ~(CFG_DATA64_EN); + + dev->CFG_cache &= (CFG_TBI_EN | CFG_MRM_DIS | CFG_MWI_DIS | + CFG_T64ADDR | CFG_DATA64_EN | CFG_EXT_125 | + CFG_M64ADDR); + dev->CFG_cache |= CFG_PINT_DUPSTS | CFG_PINT_LNKSTS | CFG_PINT_SPDSTS | + CFG_EXTSTS_EN | CFG_EXD | CFG_PESEL; + dev->CFG_cache |= CFG_REQALG; + dev->CFG_cache |= CFG_POW; + dev->CFG_cache |= CFG_TMRTEST; + + /* When compiled with 64 bit addressing, we must always enable + * the 64 bit descriptor format. + */ + if (sizeof(dma_addr_t) == 8) + dev->CFG_cache |= CFG_M64ADDR; + if (using_dac) + dev->CFG_cache |= CFG_T64ADDR; + + /* Big endian mode does not seem to do what the docs suggest */ + dev->CFG_cache &= ~CFG_BEM; + + /* setup optical transceiver if we have one */ + if (dev->CFG_cache & CFG_TBI_EN) { + printk(KERN_INFO "%s: enabling optical transceiver\n", + ndev->name); + writel(readl(dev->base + GPIOR) | 0x3e8, dev->base + GPIOR); + + /* setup auto negotiation feature advertisement */ + writel(readl(dev->base + TANAR) + | TANAR_HALF_DUP | TANAR_FULL_DUP, + dev->base + TANAR); + + /* start auto negotiation */ + writel(TBICR_MR_AN_ENABLE | TBICR_MR_RESTART_AN, + dev->base + TBICR); + writel(TBICR_MR_AN_ENABLE, dev->base + TBICR); + dev->linkstate = LINK_AUTONEGOTIATE; + + dev->CFG_cache |= CFG_MODE_1000; + } + + writel(dev->CFG_cache, dev->base + CFG); + dprintk("CFG: %08x\n", dev->CFG_cache); + + if (reset_phy) { + printk(KERN_INFO "%s: resetting phy\n", ndev->name); + writel(dev->CFG_cache | CFG_PHY_RST, dev->base + CFG); + msleep(10); + writel(dev->CFG_cache, dev->base + CFG); + } + +#if 0 /* Huh? This sets the PCI latency register. Should be done via + * the PCI layer. FIXME. + */ + if (readl(dev->base + SRR)) + writel(readl(dev->base+0x20c) | 0xfe00, dev->base + 0x20c); +#endif + + /* Note! The DMA burst size interacts with packet + * transmission, such that the largest packet that + * can be transmitted is 8192 - FLTH - burst size. + * If only the transmit fifo was larger... + */ + /* Ramit : 1024 DMA is not a good idea, it ends up banging + * some DELL and COMPAQ SMP systems */ + writel(TXCFG_CSI | TXCFG_HBI | TXCFG_ATP | TXCFG_MXDMA512 + | ((1600 / 32) * 0x100), + dev->base + TXCFG); + + /* Flush the interrupt holdoff timer */ + writel(0x000, dev->base + IHR); + writel(0x100, dev->base + IHR); + writel(0x000, dev->base + IHR); + + /* Set Rx to full duplex, don't accept runt, errored, long or length + * range errored packets. Use 512 byte DMA. + */ + /* Ramit : 1024 DMA is not a good idea, it ends up banging + * some DELL and COMPAQ SMP systems + * Turn on ALP, only we are accpeting Jumbo Packets */ + writel(RXCFG_AEP | RXCFG_ARP | RXCFG_AIRL | RXCFG_RX_FD + | RXCFG_STRIPCRC + //| RXCFG_ALP + | (RXCFG_MXDMA512) | 0, dev->base + RXCFG); + + /* Disable priority queueing */ + writel(0, dev->base + PQCR); + + /* Enable IP checksum validation and detetion of VLAN headers. + * Note: do not set the reject options as at least the 0x102 + * revision of the chip does not properly accept IP fragments + * at least for UDP. + */ + /* Ramit : Be sure to turn on RXCFG_ARP if VLAN's are enabled, since + * the MAC it calculates the packetsize AFTER stripping the VLAN + * header, and if a VLAN Tagged packet of 64 bytes is received (like + * a ping with a VLAN header) then the card, strips the 4 byte VLAN + * tag and then checks the packet size, so if RXCFG_ARP is not enabled, + * it discrards it!. These guys...... + * also turn on tag stripping if hardware acceleration is enabled + */ +#ifdef NS83820_VLAN_ACCEL_SUPPORT +#define VRCR_INIT_VALUE (VRCR_IPEN|VRCR_VTDEN|VRCR_VTREN) +#else +#define VRCR_INIT_VALUE (VRCR_IPEN|VRCR_VTDEN) +#endif + writel(VRCR_INIT_VALUE, dev->base + VRCR); + + /* Enable per-packet TCP/UDP/IP checksumming + * and per packet vlan tag insertion if + * vlan hardware acceleration is enabled + */ +#ifdef NS83820_VLAN_ACCEL_SUPPORT +#define VTCR_INIT_VALUE (VTCR_PPCHK|VTCR_VPPTI) +#else +#define VTCR_INIT_VALUE VTCR_PPCHK +#endif + writel(VTCR_INIT_VALUE, dev->base + VTCR); + + /* Ramit : Enable async and sync pause frames */ + /* writel(0, dev->base + PCR); */ + writel((PCR_PS_MCAST | PCR_PS_DA | PCR_PSEN | PCR_FFLO_4K | + PCR_FFHI_8K | PCR_STLO_4 | PCR_STHI_8 | PCR_PAUSE_CNT), + dev->base + PCR); + + /* Disable Wake On Lan */ + writel(0, dev->base + WCSR); + + ns83820_getmac(dev, ndev->dev_addr); + + /* Yes, we support dumb IP checksum on transmit */ + ndev->features |= NETIF_F_SG; + ndev->features |= NETIF_F_IP_CSUM; + +#ifdef NS83820_VLAN_ACCEL_SUPPORT + /* We also support hardware vlan acceleration */ + ndev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; +#endif + + if (using_dac) { + printk(KERN_INFO "%s: using 64 bit addressing.\n", + ndev->name); + ndev->features |= NETIF_F_HIGHDMA; + } + + printk(KERN_INFO "%s: ns83820 v" VERSION ": DP83820 v%u.%u: %pM io=0x%08lx irq=%d f=%s\n", + ndev->name, + (unsigned)readl(dev->base + SRR) >> 8, + (unsigned)readl(dev->base + SRR) & 0xff, + ndev->dev_addr, addr, pci_dev->irq, + (ndev->features & NETIF_F_HIGHDMA) ? "h,sg" : "sg" + ); + +#ifdef PHY_CODE_IS_FINISHED + ns83820_probe_phy(ndev); +#endif + + err = register_netdevice(ndev); + if (err) { + printk(KERN_INFO "ns83820: unable to register netdev: %d\n", err); + goto out_cleanup; + } + rtnl_unlock(); + + return 0; + +out_cleanup: + ns83820_disable_interrupts(dev); /* paranoia */ +out_free_irq: + rtnl_unlock(); + free_irq(pci_dev->irq, ndev); +out_disable: + if (dev->base) + iounmap(dev->base); + pci_free_consistent(pci_dev, 4 * DESC_SIZE * NR_TX_DESC, dev->tx_descs, dev->tx_phy_descs); + pci_free_consistent(pci_dev, 4 * DESC_SIZE * NR_RX_DESC, dev->rx_info.descs, dev->rx_info.phy_descs); + pci_disable_device(pci_dev); +out_free: + free_netdev(ndev); + pci_set_drvdata(pci_dev, NULL); +out: + return err; +} + +static void __devexit ns83820_remove_one(struct pci_dev *pci_dev) +{ + struct net_device *ndev = pci_get_drvdata(pci_dev); + struct ns83820 *dev = PRIV(ndev); /* ok even if NULL */ + + if (!ndev) /* paranoia */ + return; + + ns83820_disable_interrupts(dev); /* paranoia */ + + unregister_netdev(ndev); + free_irq(dev->pci_dev->irq, ndev); + iounmap(dev->base); + pci_free_consistent(dev->pci_dev, 4 * DESC_SIZE * NR_TX_DESC, + dev->tx_descs, dev->tx_phy_descs); + pci_free_consistent(dev->pci_dev, 4 * DESC_SIZE * NR_RX_DESC, + dev->rx_info.descs, dev->rx_info.phy_descs); + pci_disable_device(dev->pci_dev); + free_netdev(ndev); + pci_set_drvdata(pci_dev, NULL); +} + +static DEFINE_PCI_DEVICE_TABLE(ns83820_pci_tbl) = { + { 0x100b, 0x0022, PCI_ANY_ID, PCI_ANY_ID, 0, .driver_data = 0, }, + { 0, }, +}; + +static struct pci_driver driver = { + .name = "ns83820", + .id_table = ns83820_pci_tbl, + .probe = ns83820_init_one, + .remove = __devexit_p(ns83820_remove_one), +#if 0 /* FIXME: implement */ + .suspend = , + .resume = , +#endif +}; + + +static int __init ns83820_init(void) +{ + printk(KERN_INFO "ns83820.c: National Semiconductor DP83820 10/100/1000 driver.\n"); + return pci_register_driver(&driver); +} + +static void __exit ns83820_exit(void) +{ + pci_unregister_driver(&driver); +} + +MODULE_AUTHOR("Benjamin LaHaise "); +MODULE_DESCRIPTION("National Semiconductor DP83820 10/100/1000 driver"); +MODULE_LICENSE("GPL"); + +MODULE_DEVICE_TABLE(pci, ns83820_pci_tbl); + +module_param(lnksts, int, 0); +MODULE_PARM_DESC(lnksts, "Polarity of LNKSTS bit"); + +module_param(ihr, int, 0); +MODULE_PARM_DESC(ihr, "Time in 100 us increments to delay interrupts (range 0-127)"); + +module_param(reset_phy, int, 0); +MODULE_PARM_DESC(reset_phy, "Set to 1 to reset the PHY on startup"); + +module_init(ns83820_init); +module_exit(ns83820_exit); diff --git a/drivers/net/ethernet/natsemi/sonic.c b/drivers/net/ethernet/natsemi/sonic.c new file mode 100644 index 000000000000..26e25d7f5829 --- /dev/null +++ b/drivers/net/ethernet/natsemi/sonic.c @@ -0,0 +1,742 @@ +/* + * sonic.c + * + * (C) 2005 Finn Thain + * + * Converted to DMA API, added zero-copy buffer handling, and + * (from the mac68k project) introduced dhd's support for 16-bit cards. + * + * (C) 1996,1998 by Thomas Bogendoerfer (tsbogend@alpha.franken.de) + * + * This driver is based on work from Andreas Busse, but most of + * the code is rewritten. + * + * (C) 1995 by Andreas Busse (andy@waldorf-gmbh.de) + * + * Core code included by system sonic drivers + * + * And... partially rewritten again by David Huggins-Daines in order + * to cope with screwed up Macintosh NICs that may or may not use + * 16-bit DMA. + * + * (C) 1999 David Huggins-Daines + * + */ + +/* + * Sources: Olivetti M700-10 Risc Personal Computer hardware handbook, + * National Semiconductors data sheet for the DP83932B Sonic Ethernet + * controller, and the files "8390.c" and "skeleton.c" in this directory. + * + * Additional sources: Nat Semi data sheet for the DP83932C and Nat Semi + * Application Note AN-746, the files "lance.c" and "ibmlana.c". See also + * the NetBSD file "sys/arch/mac68k/dev/if_sn.c". + */ + + + +/* + * Open/initialize the SONIC controller. + * + * This routine should set everything up anew at each open, even + * registers that "should" only need to be set once at boot, so that + * there is non-reboot way to recover if something goes wrong. + */ +static int sonic_open(struct net_device *dev) +{ + struct sonic_local *lp = netdev_priv(dev); + int i; + + if (sonic_debug > 2) + printk("sonic_open: initializing sonic driver.\n"); + + for (i = 0; i < SONIC_NUM_RRS; i++) { + struct sk_buff *skb = dev_alloc_skb(SONIC_RBSIZE + 2); + if (skb == NULL) { + while(i > 0) { /* free any that were allocated successfully */ + i--; + dev_kfree_skb(lp->rx_skb[i]); + lp->rx_skb[i] = NULL; + } + printk(KERN_ERR "%s: couldn't allocate receive buffers\n", + dev->name); + return -ENOMEM; + } + /* align IP header unless DMA requires otherwise */ + if (SONIC_BUS_SCALE(lp->dma_bitmode) == 2) + skb_reserve(skb, 2); + lp->rx_skb[i] = skb; + } + + for (i = 0; i < SONIC_NUM_RRS; i++) { + dma_addr_t laddr = dma_map_single(lp->device, skb_put(lp->rx_skb[i], SONIC_RBSIZE), + SONIC_RBSIZE, DMA_FROM_DEVICE); + if (!laddr) { + while(i > 0) { /* free any that were mapped successfully */ + i--; + dma_unmap_single(lp->device, lp->rx_laddr[i], SONIC_RBSIZE, DMA_FROM_DEVICE); + lp->rx_laddr[i] = (dma_addr_t)0; + } + for (i = 0; i < SONIC_NUM_RRS; i++) { + dev_kfree_skb(lp->rx_skb[i]); + lp->rx_skb[i] = NULL; + } + printk(KERN_ERR "%s: couldn't map rx DMA buffers\n", + dev->name); + return -ENOMEM; + } + lp->rx_laddr[i] = laddr; + } + + /* + * Initialize the SONIC + */ + sonic_init(dev); + + netif_start_queue(dev); + + if (sonic_debug > 2) + printk("sonic_open: Initialization done.\n"); + + return 0; +} + + +/* + * Close the SONIC device + */ +static int sonic_close(struct net_device *dev) +{ + struct sonic_local *lp = netdev_priv(dev); + int i; + + if (sonic_debug > 2) + printk("sonic_close\n"); + + netif_stop_queue(dev); + + /* + * stop the SONIC, disable interrupts + */ + SONIC_WRITE(SONIC_IMR, 0); + SONIC_WRITE(SONIC_ISR, 0x7fff); + SONIC_WRITE(SONIC_CMD, SONIC_CR_RST); + + /* unmap and free skbs that haven't been transmitted */ + for (i = 0; i < SONIC_NUM_TDS; i++) { + if(lp->tx_laddr[i]) { + dma_unmap_single(lp->device, lp->tx_laddr[i], lp->tx_len[i], DMA_TO_DEVICE); + lp->tx_laddr[i] = (dma_addr_t)0; + } + if(lp->tx_skb[i]) { + dev_kfree_skb(lp->tx_skb[i]); + lp->tx_skb[i] = NULL; + } + } + + /* unmap and free the receive buffers */ + for (i = 0; i < SONIC_NUM_RRS; i++) { + if(lp->rx_laddr[i]) { + dma_unmap_single(lp->device, lp->rx_laddr[i], SONIC_RBSIZE, DMA_FROM_DEVICE); + lp->rx_laddr[i] = (dma_addr_t)0; + } + if(lp->rx_skb[i]) { + dev_kfree_skb(lp->rx_skb[i]); + lp->rx_skb[i] = NULL; + } + } + + return 0; +} + +static void sonic_tx_timeout(struct net_device *dev) +{ + struct sonic_local *lp = netdev_priv(dev); + int i; + /* + * put the Sonic into software-reset mode and + * disable all interrupts before releasing DMA buffers + */ + SONIC_WRITE(SONIC_IMR, 0); + SONIC_WRITE(SONIC_ISR, 0x7fff); + SONIC_WRITE(SONIC_CMD, SONIC_CR_RST); + /* We could resend the original skbs. Easier to re-initialise. */ + for (i = 0; i < SONIC_NUM_TDS; i++) { + if(lp->tx_laddr[i]) { + dma_unmap_single(lp->device, lp->tx_laddr[i], lp->tx_len[i], DMA_TO_DEVICE); + lp->tx_laddr[i] = (dma_addr_t)0; + } + if(lp->tx_skb[i]) { + dev_kfree_skb(lp->tx_skb[i]); + lp->tx_skb[i] = NULL; + } + } + /* Try to restart the adaptor. */ + sonic_init(dev); + lp->stats.tx_errors++; + dev->trans_start = jiffies; /* prevent tx timeout */ + netif_wake_queue(dev); +} + +/* + * transmit packet + * + * Appends new TD during transmission thus avoiding any TX interrupts + * until we run out of TDs. + * This routine interacts closely with the ISR in that it may, + * set tx_skb[i] + * reset the status flags of the new TD + * set and reset EOL flags + * stop the tx queue + * The ISR interacts with this routine in various ways. It may, + * reset tx_skb[i] + * test the EOL and status flags of the TDs + * wake the tx queue + * Concurrently with all of this, the SONIC is potentially writing to + * the status flags of the TDs. + * Until some mutual exclusion is added, this code will not work with SMP. However, + * MIPS Jazz machines and m68k Macs were all uni-processor machines. + */ + +static int sonic_send_packet(struct sk_buff *skb, struct net_device *dev) +{ + struct sonic_local *lp = netdev_priv(dev); + dma_addr_t laddr; + int length; + int entry = lp->next_tx; + + if (sonic_debug > 2) + printk("sonic_send_packet: skb=%p, dev=%p\n", skb, dev); + + length = skb->len; + if (length < ETH_ZLEN) { + if (skb_padto(skb, ETH_ZLEN)) + return NETDEV_TX_OK; + length = ETH_ZLEN; + } + + /* + * Map the packet data into the logical DMA address space + */ + + laddr = dma_map_single(lp->device, skb->data, length, DMA_TO_DEVICE); + if (!laddr) { + printk(KERN_ERR "%s: failed to map tx DMA buffer.\n", dev->name); + dev_kfree_skb(skb); + return NETDEV_TX_BUSY; + } + + sonic_tda_put(dev, entry, SONIC_TD_STATUS, 0); /* clear status */ + sonic_tda_put(dev, entry, SONIC_TD_FRAG_COUNT, 1); /* single fragment */ + sonic_tda_put(dev, entry, SONIC_TD_PKTSIZE, length); /* length of packet */ + sonic_tda_put(dev, entry, SONIC_TD_FRAG_PTR_L, laddr & 0xffff); + sonic_tda_put(dev, entry, SONIC_TD_FRAG_PTR_H, laddr >> 16); + sonic_tda_put(dev, entry, SONIC_TD_FRAG_SIZE, length); + sonic_tda_put(dev, entry, SONIC_TD_LINK, + sonic_tda_get(dev, entry, SONIC_TD_LINK) | SONIC_EOL); + + /* + * Must set tx_skb[entry] only after clearing status, and + * before clearing EOL and before stopping queue + */ + wmb(); + lp->tx_len[entry] = length; + lp->tx_laddr[entry] = laddr; + lp->tx_skb[entry] = skb; + + wmb(); + sonic_tda_put(dev, lp->eol_tx, SONIC_TD_LINK, + sonic_tda_get(dev, lp->eol_tx, SONIC_TD_LINK) & ~SONIC_EOL); + lp->eol_tx = entry; + + lp->next_tx = (entry + 1) & SONIC_TDS_MASK; + if (lp->tx_skb[lp->next_tx] != NULL) { + /* The ring is full, the ISR has yet to process the next TD. */ + if (sonic_debug > 3) + printk("%s: stopping queue\n", dev->name); + netif_stop_queue(dev); + /* after this packet, wait for ISR to free up some TDAs */ + } else netif_start_queue(dev); + + if (sonic_debug > 2) + printk("sonic_send_packet: issuing Tx command\n"); + + SONIC_WRITE(SONIC_CMD, SONIC_CR_TXP); + + return NETDEV_TX_OK; +} + +/* + * The typical workload of the driver: + * Handle the network interface interrupts. + */ +static irqreturn_t sonic_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = dev_id; + struct sonic_local *lp = netdev_priv(dev); + int status; + + if (!(status = SONIC_READ(SONIC_ISR) & SONIC_IMR_DEFAULT)) + return IRQ_NONE; + + do { + if (status & SONIC_INT_PKTRX) { + if (sonic_debug > 2) + printk("%s: packet rx\n", dev->name); + sonic_rx(dev); /* got packet(s) */ + SONIC_WRITE(SONIC_ISR, SONIC_INT_PKTRX); /* clear the interrupt */ + } + + if (status & SONIC_INT_TXDN) { + int entry = lp->cur_tx; + int td_status; + int freed_some = 0; + + /* At this point, cur_tx is the index of a TD that is one of: + * unallocated/freed (status set & tx_skb[entry] clear) + * allocated and sent (status set & tx_skb[entry] set ) + * allocated and not yet sent (status clear & tx_skb[entry] set ) + * still being allocated by sonic_send_packet (status clear & tx_skb[entry] clear) + */ + + if (sonic_debug > 2) + printk("%s: tx done\n", dev->name); + + while (lp->tx_skb[entry] != NULL) { + if ((td_status = sonic_tda_get(dev, entry, SONIC_TD_STATUS)) == 0) + break; + + if (td_status & 0x0001) { + lp->stats.tx_packets++; + lp->stats.tx_bytes += sonic_tda_get(dev, entry, SONIC_TD_PKTSIZE); + } else { + lp->stats.tx_errors++; + if (td_status & 0x0642) + lp->stats.tx_aborted_errors++; + if (td_status & 0x0180) + lp->stats.tx_carrier_errors++; + if (td_status & 0x0020) + lp->stats.tx_window_errors++; + if (td_status & 0x0004) + lp->stats.tx_fifo_errors++; + } + + /* We must free the original skb */ + dev_kfree_skb_irq(lp->tx_skb[entry]); + lp->tx_skb[entry] = NULL; + /* and unmap DMA buffer */ + dma_unmap_single(lp->device, lp->tx_laddr[entry], lp->tx_len[entry], DMA_TO_DEVICE); + lp->tx_laddr[entry] = (dma_addr_t)0; + freed_some = 1; + + if (sonic_tda_get(dev, entry, SONIC_TD_LINK) & SONIC_EOL) { + entry = (entry + 1) & SONIC_TDS_MASK; + break; + } + entry = (entry + 1) & SONIC_TDS_MASK; + } + + if (freed_some || lp->tx_skb[entry] == NULL) + netif_wake_queue(dev); /* The ring is no longer full */ + lp->cur_tx = entry; + SONIC_WRITE(SONIC_ISR, SONIC_INT_TXDN); /* clear the interrupt */ + } + + /* + * check error conditions + */ + if (status & SONIC_INT_RFO) { + if (sonic_debug > 1) + printk("%s: rx fifo overrun\n", dev->name); + lp->stats.rx_fifo_errors++; + SONIC_WRITE(SONIC_ISR, SONIC_INT_RFO); /* clear the interrupt */ + } + if (status & SONIC_INT_RDE) { + if (sonic_debug > 1) + printk("%s: rx descriptors exhausted\n", dev->name); + lp->stats.rx_dropped++; + SONIC_WRITE(SONIC_ISR, SONIC_INT_RDE); /* clear the interrupt */ + } + if (status & SONIC_INT_RBAE) { + if (sonic_debug > 1) + printk("%s: rx buffer area exceeded\n", dev->name); + lp->stats.rx_dropped++; + SONIC_WRITE(SONIC_ISR, SONIC_INT_RBAE); /* clear the interrupt */ + } + + /* counter overruns; all counters are 16bit wide */ + if (status & SONIC_INT_FAE) { + lp->stats.rx_frame_errors += 65536; + SONIC_WRITE(SONIC_ISR, SONIC_INT_FAE); /* clear the interrupt */ + } + if (status & SONIC_INT_CRC) { + lp->stats.rx_crc_errors += 65536; + SONIC_WRITE(SONIC_ISR, SONIC_INT_CRC); /* clear the interrupt */ + } + if (status & SONIC_INT_MP) { + lp->stats.rx_missed_errors += 65536; + SONIC_WRITE(SONIC_ISR, SONIC_INT_MP); /* clear the interrupt */ + } + + /* transmit error */ + if (status & SONIC_INT_TXER) { + if ((SONIC_READ(SONIC_TCR) & SONIC_TCR_FU) && (sonic_debug > 2)) + printk(KERN_ERR "%s: tx fifo underrun\n", dev->name); + SONIC_WRITE(SONIC_ISR, SONIC_INT_TXER); /* clear the interrupt */ + } + + /* bus retry */ + if (status & SONIC_INT_BR) { + printk(KERN_ERR "%s: Bus retry occurred! Device interrupt disabled.\n", + dev->name); + /* ... to help debug DMA problems causing endless interrupts. */ + /* Bounce the eth interface to turn on the interrupt again. */ + SONIC_WRITE(SONIC_IMR, 0); + SONIC_WRITE(SONIC_ISR, SONIC_INT_BR); /* clear the interrupt */ + } + + /* load CAM done */ + if (status & SONIC_INT_LCD) + SONIC_WRITE(SONIC_ISR, SONIC_INT_LCD); /* clear the interrupt */ + } while((status = SONIC_READ(SONIC_ISR) & SONIC_IMR_DEFAULT)); + return IRQ_HANDLED; +} + +/* + * We have a good packet(s), pass it/them up the network stack. + */ +static void sonic_rx(struct net_device *dev) +{ + struct sonic_local *lp = netdev_priv(dev); + int status; + int entry = lp->cur_rx; + + while (sonic_rda_get(dev, entry, SONIC_RD_IN_USE) == 0) { + struct sk_buff *used_skb; + struct sk_buff *new_skb; + dma_addr_t new_laddr; + u16 bufadr_l; + u16 bufadr_h; + int pkt_len; + + status = sonic_rda_get(dev, entry, SONIC_RD_STATUS); + if (status & SONIC_RCR_PRX) { + /* Malloc up new buffer. */ + new_skb = dev_alloc_skb(SONIC_RBSIZE + 2); + if (new_skb == NULL) { + printk(KERN_ERR "%s: Memory squeeze, dropping packet.\n", dev->name); + lp->stats.rx_dropped++; + break; + } + /* provide 16 byte IP header alignment unless DMA requires otherwise */ + if(SONIC_BUS_SCALE(lp->dma_bitmode) == 2) + skb_reserve(new_skb, 2); + + new_laddr = dma_map_single(lp->device, skb_put(new_skb, SONIC_RBSIZE), + SONIC_RBSIZE, DMA_FROM_DEVICE); + if (!new_laddr) { + dev_kfree_skb(new_skb); + printk(KERN_ERR "%s: Failed to map rx buffer, dropping packet.\n", dev->name); + lp->stats.rx_dropped++; + break; + } + + /* now we have a new skb to replace it, pass the used one up the stack */ + dma_unmap_single(lp->device, lp->rx_laddr[entry], SONIC_RBSIZE, DMA_FROM_DEVICE); + used_skb = lp->rx_skb[entry]; + pkt_len = sonic_rda_get(dev, entry, SONIC_RD_PKTLEN); + skb_trim(used_skb, pkt_len); + used_skb->protocol = eth_type_trans(used_skb, dev); + netif_rx(used_skb); + lp->stats.rx_packets++; + lp->stats.rx_bytes += pkt_len; + + /* and insert the new skb */ + lp->rx_laddr[entry] = new_laddr; + lp->rx_skb[entry] = new_skb; + + bufadr_l = (unsigned long)new_laddr & 0xffff; + bufadr_h = (unsigned long)new_laddr >> 16; + sonic_rra_put(dev, entry, SONIC_RR_BUFADR_L, bufadr_l); + sonic_rra_put(dev, entry, SONIC_RR_BUFADR_H, bufadr_h); + } else { + /* This should only happen, if we enable accepting broken packets. */ + lp->stats.rx_errors++; + if (status & SONIC_RCR_FAER) + lp->stats.rx_frame_errors++; + if (status & SONIC_RCR_CRCR) + lp->stats.rx_crc_errors++; + } + if (status & SONIC_RCR_LPKT) { + /* + * this was the last packet out of the current receive buffer + * give the buffer back to the SONIC + */ + lp->cur_rwp += SIZEOF_SONIC_RR * SONIC_BUS_SCALE(lp->dma_bitmode); + if (lp->cur_rwp >= lp->rra_end) lp->cur_rwp = lp->rra_laddr & 0xffff; + SONIC_WRITE(SONIC_RWP, lp->cur_rwp); + if (SONIC_READ(SONIC_ISR) & SONIC_INT_RBE) { + if (sonic_debug > 2) + printk("%s: rx buffer exhausted\n", dev->name); + SONIC_WRITE(SONIC_ISR, SONIC_INT_RBE); /* clear the flag */ + } + } else + printk(KERN_ERR "%s: rx desc without RCR_LPKT. Shouldn't happen !?\n", + dev->name); + /* + * give back the descriptor + */ + sonic_rda_put(dev, entry, SONIC_RD_LINK, + sonic_rda_get(dev, entry, SONIC_RD_LINK) | SONIC_EOL); + sonic_rda_put(dev, entry, SONIC_RD_IN_USE, 1); + sonic_rda_put(dev, lp->eol_rx, SONIC_RD_LINK, + sonic_rda_get(dev, lp->eol_rx, SONIC_RD_LINK) & ~SONIC_EOL); + lp->eol_rx = entry; + lp->cur_rx = entry = (entry + 1) & SONIC_RDS_MASK; + } + /* + * If any worth-while packets have been received, netif_rx() + * has done a mark_bh(NET_BH) for us and will work on them + * when we get to the bottom-half routine. + */ +} + + +/* + * Get the current statistics. + * This may be called with the device open or closed. + */ +static struct net_device_stats *sonic_get_stats(struct net_device *dev) +{ + struct sonic_local *lp = netdev_priv(dev); + + /* read the tally counter from the SONIC and reset them */ + lp->stats.rx_crc_errors += SONIC_READ(SONIC_CRCT); + SONIC_WRITE(SONIC_CRCT, 0xffff); + lp->stats.rx_frame_errors += SONIC_READ(SONIC_FAET); + SONIC_WRITE(SONIC_FAET, 0xffff); + lp->stats.rx_missed_errors += SONIC_READ(SONIC_MPT); + SONIC_WRITE(SONIC_MPT, 0xffff); + + return &lp->stats; +} + + +/* + * Set or clear the multicast filter for this adaptor. + */ +static void sonic_multicast_list(struct net_device *dev) +{ + struct sonic_local *lp = netdev_priv(dev); + unsigned int rcr; + struct netdev_hw_addr *ha; + unsigned char *addr; + int i; + + rcr = SONIC_READ(SONIC_RCR) & ~(SONIC_RCR_PRO | SONIC_RCR_AMC); + rcr |= SONIC_RCR_BRD; /* accept broadcast packets */ + + if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */ + rcr |= SONIC_RCR_PRO; + } else { + if ((dev->flags & IFF_ALLMULTI) || + (netdev_mc_count(dev) > 15)) { + rcr |= SONIC_RCR_AMC; + } else { + if (sonic_debug > 2) + printk("sonic_multicast_list: mc_count %d\n", + netdev_mc_count(dev)); + sonic_set_cam_enable(dev, 1); /* always enable our own address */ + i = 1; + netdev_for_each_mc_addr(ha, dev) { + addr = ha->addr; + sonic_cda_put(dev, i, SONIC_CD_CAP0, addr[1] << 8 | addr[0]); + sonic_cda_put(dev, i, SONIC_CD_CAP1, addr[3] << 8 | addr[2]); + sonic_cda_put(dev, i, SONIC_CD_CAP2, addr[5] << 8 | addr[4]); + sonic_set_cam_enable(dev, sonic_get_cam_enable(dev) | (1 << i)); + i++; + } + SONIC_WRITE(SONIC_CDC, 16); + /* issue Load CAM command */ + SONIC_WRITE(SONIC_CDP, lp->cda_laddr & 0xffff); + SONIC_WRITE(SONIC_CMD, SONIC_CR_LCAM); + } + } + + if (sonic_debug > 2) + printk("sonic_multicast_list: setting RCR=%x\n", rcr); + + SONIC_WRITE(SONIC_RCR, rcr); +} + + +/* + * Initialize the SONIC ethernet controller. + */ +static int sonic_init(struct net_device *dev) +{ + unsigned int cmd; + struct sonic_local *lp = netdev_priv(dev); + int i; + + /* + * put the Sonic into software-reset mode and + * disable all interrupts + */ + SONIC_WRITE(SONIC_IMR, 0); + SONIC_WRITE(SONIC_ISR, 0x7fff); + SONIC_WRITE(SONIC_CMD, SONIC_CR_RST); + + /* + * clear software reset flag, disable receiver, clear and + * enable interrupts, then completely initialize the SONIC + */ + SONIC_WRITE(SONIC_CMD, 0); + SONIC_WRITE(SONIC_CMD, SONIC_CR_RXDIS); + + /* + * initialize the receive resource area + */ + if (sonic_debug > 2) + printk("sonic_init: initialize receive resource area\n"); + + for (i = 0; i < SONIC_NUM_RRS; i++) { + u16 bufadr_l = (unsigned long)lp->rx_laddr[i] & 0xffff; + u16 bufadr_h = (unsigned long)lp->rx_laddr[i] >> 16; + sonic_rra_put(dev, i, SONIC_RR_BUFADR_L, bufadr_l); + sonic_rra_put(dev, i, SONIC_RR_BUFADR_H, bufadr_h); + sonic_rra_put(dev, i, SONIC_RR_BUFSIZE_L, SONIC_RBSIZE >> 1); + sonic_rra_put(dev, i, SONIC_RR_BUFSIZE_H, 0); + } + + /* initialize all RRA registers */ + lp->rra_end = (lp->rra_laddr + SONIC_NUM_RRS * SIZEOF_SONIC_RR * + SONIC_BUS_SCALE(lp->dma_bitmode)) & 0xffff; + lp->cur_rwp = (lp->rra_laddr + (SONIC_NUM_RRS - 1) * SIZEOF_SONIC_RR * + SONIC_BUS_SCALE(lp->dma_bitmode)) & 0xffff; + + SONIC_WRITE(SONIC_RSA, lp->rra_laddr & 0xffff); + SONIC_WRITE(SONIC_REA, lp->rra_end); + SONIC_WRITE(SONIC_RRP, lp->rra_laddr & 0xffff); + SONIC_WRITE(SONIC_RWP, lp->cur_rwp); + SONIC_WRITE(SONIC_URRA, lp->rra_laddr >> 16); + SONIC_WRITE(SONIC_EOBC, (SONIC_RBSIZE >> 1) - (lp->dma_bitmode ? 2 : 1)); + + /* load the resource pointers */ + if (sonic_debug > 3) + printk("sonic_init: issuing RRRA command\n"); + + SONIC_WRITE(SONIC_CMD, SONIC_CR_RRRA); + i = 0; + while (i++ < 100) { + if (SONIC_READ(SONIC_CMD) & SONIC_CR_RRRA) + break; + } + + if (sonic_debug > 2) + printk("sonic_init: status=%x i=%d\n", SONIC_READ(SONIC_CMD), i); + + /* + * Initialize the receive descriptors so that they + * become a circular linked list, ie. let the last + * descriptor point to the first again. + */ + if (sonic_debug > 2) + printk("sonic_init: initialize receive descriptors\n"); + for (i=0; irda_laddr + + ((i+1) * SIZEOF_SONIC_RD * SONIC_BUS_SCALE(lp->dma_bitmode))); + } + /* fix last descriptor */ + sonic_rda_put(dev, SONIC_NUM_RDS - 1, SONIC_RD_LINK, + (lp->rda_laddr & 0xffff) | SONIC_EOL); + lp->eol_rx = SONIC_NUM_RDS - 1; + lp->cur_rx = 0; + SONIC_WRITE(SONIC_URDA, lp->rda_laddr >> 16); + SONIC_WRITE(SONIC_CRDA, lp->rda_laddr & 0xffff); + + /* + * initialize transmit descriptors + */ + if (sonic_debug > 2) + printk("sonic_init: initialize transmit descriptors\n"); + for (i = 0; i < SONIC_NUM_TDS; i++) { + sonic_tda_put(dev, i, SONIC_TD_STATUS, 0); + sonic_tda_put(dev, i, SONIC_TD_CONFIG, 0); + sonic_tda_put(dev, i, SONIC_TD_PKTSIZE, 0); + sonic_tda_put(dev, i, SONIC_TD_FRAG_COUNT, 0); + sonic_tda_put(dev, i, SONIC_TD_LINK, + (lp->tda_laddr & 0xffff) + + (i + 1) * SIZEOF_SONIC_TD * SONIC_BUS_SCALE(lp->dma_bitmode)); + lp->tx_skb[i] = NULL; + } + /* fix last descriptor */ + sonic_tda_put(dev, SONIC_NUM_TDS - 1, SONIC_TD_LINK, + (lp->tda_laddr & 0xffff)); + + SONIC_WRITE(SONIC_UTDA, lp->tda_laddr >> 16); + SONIC_WRITE(SONIC_CTDA, lp->tda_laddr & 0xffff); + lp->cur_tx = lp->next_tx = 0; + lp->eol_tx = SONIC_NUM_TDS - 1; + + /* + * put our own address to CAM desc[0] + */ + sonic_cda_put(dev, 0, SONIC_CD_CAP0, dev->dev_addr[1] << 8 | dev->dev_addr[0]); + sonic_cda_put(dev, 0, SONIC_CD_CAP1, dev->dev_addr[3] << 8 | dev->dev_addr[2]); + sonic_cda_put(dev, 0, SONIC_CD_CAP2, dev->dev_addr[5] << 8 | dev->dev_addr[4]); + sonic_set_cam_enable(dev, 1); + + for (i = 0; i < 16; i++) + sonic_cda_put(dev, i, SONIC_CD_ENTRY_POINTER, i); + + /* + * initialize CAM registers + */ + SONIC_WRITE(SONIC_CDP, lp->cda_laddr & 0xffff); + SONIC_WRITE(SONIC_CDC, 16); + + /* + * load the CAM + */ + SONIC_WRITE(SONIC_CMD, SONIC_CR_LCAM); + + i = 0; + while (i++ < 100) { + if (SONIC_READ(SONIC_ISR) & SONIC_INT_LCD) + break; + } + if (sonic_debug > 2) { + printk("sonic_init: CMD=%x, ISR=%x\n, i=%d", + SONIC_READ(SONIC_CMD), SONIC_READ(SONIC_ISR), i); + } + + /* + * enable receiver, disable loopback + * and enable all interrupts + */ + SONIC_WRITE(SONIC_CMD, SONIC_CR_RXEN | SONIC_CR_STP); + SONIC_WRITE(SONIC_RCR, SONIC_RCR_DEFAULT); + SONIC_WRITE(SONIC_TCR, SONIC_TCR_DEFAULT); + SONIC_WRITE(SONIC_ISR, 0x7fff); + SONIC_WRITE(SONIC_IMR, SONIC_IMR_DEFAULT); + + cmd = SONIC_READ(SONIC_CMD); + if ((cmd & SONIC_CR_RXEN) == 0 || (cmd & SONIC_CR_STP) == 0) + printk(KERN_ERR "sonic_init: failed, status=%x\n", cmd); + + if (sonic_debug > 2) + printk("sonic_init: new status=%x\n", + SONIC_READ(SONIC_CMD)); + + return 0; +} + +MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/natsemi/sonic.h b/drivers/net/ethernet/natsemi/sonic.h new file mode 100644 index 000000000000..07091dd27e5d --- /dev/null +++ b/drivers/net/ethernet/natsemi/sonic.h @@ -0,0 +1,450 @@ +/* + * Header file for sonic.c + * + * (C) Waldorf Electronics, Germany + * Written by Andreas Busse + * + * NOTE: most of the structure definitions here are endian dependent. + * If you want to use this driver on big endian machines, the data + * and pad structure members must be exchanged. Also, the structures + * need to be changed accordingly to the bus size. + * + * 981229 MSch: did just that for the 68k Mac port (32 bit, big endian) + * + * 990611 David Huggins-Daines : This machine abstraction + * does not cope with 16-bit bus sizes very well. Therefore I have + * rewritten it with ugly macros and evil inlines. + * + * 050625 Finn Thain: introduced more 32-bit cards and dhd's support + * for 16-bit cards (from the mac68k project). + */ + +#ifndef SONIC_H +#define SONIC_H + + +/* + * SONIC register offsets + */ + +#define SONIC_CMD 0x00 +#define SONIC_DCR 0x01 +#define SONIC_RCR 0x02 +#define SONIC_TCR 0x03 +#define SONIC_IMR 0x04 +#define SONIC_ISR 0x05 + +#define SONIC_UTDA 0x06 +#define SONIC_CTDA 0x07 + +#define SONIC_URDA 0x0d +#define SONIC_CRDA 0x0e +#define SONIC_EOBC 0x13 +#define SONIC_URRA 0x14 +#define SONIC_RSA 0x15 +#define SONIC_REA 0x16 +#define SONIC_RRP 0x17 +#define SONIC_RWP 0x18 +#define SONIC_RSC 0x2b + +#define SONIC_CEP 0x21 +#define SONIC_CAP2 0x22 +#define SONIC_CAP1 0x23 +#define SONIC_CAP0 0x24 +#define SONIC_CE 0x25 +#define SONIC_CDP 0x26 +#define SONIC_CDC 0x27 + +#define SONIC_WT0 0x29 +#define SONIC_WT1 0x2a + +#define SONIC_SR 0x28 + + +/* test-only registers */ + +#define SONIC_TPS 0x08 +#define SONIC_TFC 0x09 +#define SONIC_TSA0 0x0a +#define SONIC_TSA1 0x0b +#define SONIC_TFS 0x0c + +#define SONIC_CRBA0 0x0f +#define SONIC_CRBA1 0x10 +#define SONIC_RBWC0 0x11 +#define SONIC_RBWC1 0x12 +#define SONIC_TTDA 0x20 +#define SONIC_MDT 0x2f + +#define SONIC_TRBA0 0x19 +#define SONIC_TRBA1 0x1a +#define SONIC_TBWC0 0x1b +#define SONIC_TBWC1 0x1c +#define SONIC_LLFA 0x1f + +#define SONIC_ADDR0 0x1d +#define SONIC_ADDR1 0x1e + +/* + * Error counters + */ + +#define SONIC_CRCT 0x2c +#define SONIC_FAET 0x2d +#define SONIC_MPT 0x2e + +#define SONIC_DCR2 0x3f + +/* + * SONIC command bits + */ + +#define SONIC_CR_LCAM 0x0200 +#define SONIC_CR_RRRA 0x0100 +#define SONIC_CR_RST 0x0080 +#define SONIC_CR_ST 0x0020 +#define SONIC_CR_STP 0x0010 +#define SONIC_CR_RXEN 0x0008 +#define SONIC_CR_RXDIS 0x0004 +#define SONIC_CR_TXP 0x0002 +#define SONIC_CR_HTX 0x0001 + +/* + * SONIC data configuration bits + */ + +#define SONIC_DCR_EXBUS 0x8000 +#define SONIC_DCR_LBR 0x2000 +#define SONIC_DCR_PO1 0x1000 +#define SONIC_DCR_PO0 0x0800 +#define SONIC_DCR_SBUS 0x0400 +#define SONIC_DCR_USR1 0x0200 +#define SONIC_DCR_USR0 0x0100 +#define SONIC_DCR_WC1 0x0080 +#define SONIC_DCR_WC0 0x0040 +#define SONIC_DCR_DW 0x0020 +#define SONIC_DCR_BMS 0x0010 +#define SONIC_DCR_RFT1 0x0008 +#define SONIC_DCR_RFT0 0x0004 +#define SONIC_DCR_TFT1 0x0002 +#define SONIC_DCR_TFT0 0x0001 + +/* + * Constants for the SONIC receive control register. + */ + +#define SONIC_RCR_ERR 0x8000 +#define SONIC_RCR_RNT 0x4000 +#define SONIC_RCR_BRD 0x2000 +#define SONIC_RCR_PRO 0x1000 +#define SONIC_RCR_AMC 0x0800 +#define SONIC_RCR_LB1 0x0400 +#define SONIC_RCR_LB0 0x0200 + +#define SONIC_RCR_MC 0x0100 +#define SONIC_RCR_BC 0x0080 +#define SONIC_RCR_LPKT 0x0040 +#define SONIC_RCR_CRS 0x0020 +#define SONIC_RCR_COL 0x0010 +#define SONIC_RCR_CRCR 0x0008 +#define SONIC_RCR_FAER 0x0004 +#define SONIC_RCR_LBK 0x0002 +#define SONIC_RCR_PRX 0x0001 + +#define SONIC_RCR_LB_OFF 0 +#define SONIC_RCR_LB_MAC SONIC_RCR_LB0 +#define SONIC_RCR_LB_ENDEC SONIC_RCR_LB1 +#define SONIC_RCR_LB_TRANS (SONIC_RCR_LB0 | SONIC_RCR_LB1) + +/* default RCR setup */ + +#define SONIC_RCR_DEFAULT (SONIC_RCR_BRD) + + +/* + * SONIC Transmit Control register bits + */ + +#define SONIC_TCR_PINTR 0x8000 +#define SONIC_TCR_POWC 0x4000 +#define SONIC_TCR_CRCI 0x2000 +#define SONIC_TCR_EXDIS 0x1000 +#define SONIC_TCR_EXD 0x0400 +#define SONIC_TCR_DEF 0x0200 +#define SONIC_TCR_NCRS 0x0100 +#define SONIC_TCR_CRLS 0x0080 +#define SONIC_TCR_EXC 0x0040 +#define SONIC_TCR_PMB 0x0008 +#define SONIC_TCR_FU 0x0004 +#define SONIC_TCR_BCM 0x0002 +#define SONIC_TCR_PTX 0x0001 + +#define SONIC_TCR_DEFAULT 0x0000 + +/* + * Constants for the SONIC_INTERRUPT_MASK and + * SONIC_INTERRUPT_STATUS registers. + */ + +#define SONIC_INT_BR 0x4000 +#define SONIC_INT_HBL 0x2000 +#define SONIC_INT_LCD 0x1000 +#define SONIC_INT_PINT 0x0800 +#define SONIC_INT_PKTRX 0x0400 +#define SONIC_INT_TXDN 0x0200 +#define SONIC_INT_TXER 0x0100 +#define SONIC_INT_TC 0x0080 +#define SONIC_INT_RDE 0x0040 +#define SONIC_INT_RBE 0x0020 +#define SONIC_INT_RBAE 0x0010 +#define SONIC_INT_CRC 0x0008 +#define SONIC_INT_FAE 0x0004 +#define SONIC_INT_MP 0x0002 +#define SONIC_INT_RFO 0x0001 + + +/* + * The interrupts we allow. + */ + +#define SONIC_IMR_DEFAULT ( SONIC_INT_BR | \ + SONIC_INT_LCD | \ + SONIC_INT_RFO | \ + SONIC_INT_PKTRX | \ + SONIC_INT_TXDN | \ + SONIC_INT_TXER | \ + SONIC_INT_RDE | \ + SONIC_INT_RBAE | \ + SONIC_INT_CRC | \ + SONIC_INT_FAE | \ + SONIC_INT_MP) + + +#define SONIC_EOL 0x0001 +#define CAM_DESCRIPTORS 16 + +/* Offsets in the various DMA buffers accessed by the SONIC */ + +#define SONIC_BITMODE16 0 +#define SONIC_BITMODE32 1 +#define SONIC_BUS_SCALE(bitmode) ((bitmode) ? 4 : 2) +/* Note! These are all measured in bus-size units, so use SONIC_BUS_SCALE */ +#define SIZEOF_SONIC_RR 4 +#define SONIC_RR_BUFADR_L 0 +#define SONIC_RR_BUFADR_H 1 +#define SONIC_RR_BUFSIZE_L 2 +#define SONIC_RR_BUFSIZE_H 3 + +#define SIZEOF_SONIC_RD 7 +#define SONIC_RD_STATUS 0 +#define SONIC_RD_PKTLEN 1 +#define SONIC_RD_PKTPTR_L 2 +#define SONIC_RD_PKTPTR_H 3 +#define SONIC_RD_SEQNO 4 +#define SONIC_RD_LINK 5 +#define SONIC_RD_IN_USE 6 + +#define SIZEOF_SONIC_TD 8 +#define SONIC_TD_STATUS 0 +#define SONIC_TD_CONFIG 1 +#define SONIC_TD_PKTSIZE 2 +#define SONIC_TD_FRAG_COUNT 3 +#define SONIC_TD_FRAG_PTR_L 4 +#define SONIC_TD_FRAG_PTR_H 5 +#define SONIC_TD_FRAG_SIZE 6 +#define SONIC_TD_LINK 7 + +#define SIZEOF_SONIC_CD 4 +#define SONIC_CD_ENTRY_POINTER 0 +#define SONIC_CD_CAP0 1 +#define SONIC_CD_CAP1 2 +#define SONIC_CD_CAP2 3 + +#define SIZEOF_SONIC_CDA ((CAM_DESCRIPTORS * SIZEOF_SONIC_CD) + 1) +#define SONIC_CDA_CAM_ENABLE (CAM_DESCRIPTORS * SIZEOF_SONIC_CD) + +/* + * Some tunables for the buffer areas. Power of 2 is required + * the current driver uses one receive buffer for each descriptor. + * + * MSch: use more buffer space for the slow m68k Macs! + */ +#define SONIC_NUM_RRS 16 /* number of receive resources */ +#define SONIC_NUM_RDS SONIC_NUM_RRS /* number of receive descriptors */ +#define SONIC_NUM_TDS 16 /* number of transmit descriptors */ + +#define SONIC_RDS_MASK (SONIC_NUM_RDS-1) +#define SONIC_TDS_MASK (SONIC_NUM_TDS-1) + +#define SONIC_RBSIZE 1520 /* size of one resource buffer */ + +/* Again, measured in bus size units! */ +#define SIZEOF_SONIC_DESC (SIZEOF_SONIC_CDA \ + + (SIZEOF_SONIC_TD * SONIC_NUM_TDS) \ + + (SIZEOF_SONIC_RD * SONIC_NUM_RDS) \ + + (SIZEOF_SONIC_RR * SONIC_NUM_RRS)) + +/* Information that need to be kept for each board. */ +struct sonic_local { + /* Bus size. 0 == 16 bits, 1 == 32 bits. */ + int dma_bitmode; + /* Register offset within the longword (independent of endianness, + and varies from one type of Macintosh SONIC to another + (Aarrgh)) */ + int reg_offset; + void *descriptors; + /* Crud. These areas have to be within the same 64K. Therefore + we allocate a desriptors page, and point these to places within it. */ + void *cda; /* CAM descriptor area */ + void *tda; /* Transmit descriptor area */ + void *rra; /* Receive resource area */ + void *rda; /* Receive descriptor area */ + struct sk_buff* volatile rx_skb[SONIC_NUM_RRS]; /* packets to be received */ + struct sk_buff* volatile tx_skb[SONIC_NUM_TDS]; /* packets to be transmitted */ + unsigned int tx_len[SONIC_NUM_TDS]; /* lengths of tx DMA mappings */ + /* Logical DMA addresses on MIPS, bus addresses on m68k + * (so "laddr" is a bit misleading) */ + dma_addr_t descriptors_laddr; + u32 cda_laddr; /* logical DMA address of CDA */ + u32 tda_laddr; /* logical DMA address of TDA */ + u32 rra_laddr; /* logical DMA address of RRA */ + u32 rda_laddr; /* logical DMA address of RDA */ + dma_addr_t rx_laddr[SONIC_NUM_RRS]; /* logical DMA addresses of rx skbuffs */ + dma_addr_t tx_laddr[SONIC_NUM_TDS]; /* logical DMA addresses of tx skbuffs */ + unsigned int rra_end; + unsigned int cur_rwp; + unsigned int cur_rx; + unsigned int cur_tx; /* first unacked transmit packet */ + unsigned int eol_rx; + unsigned int eol_tx; /* last unacked transmit packet */ + unsigned int next_tx; /* next free TD */ + struct device *device; /* generic device */ + struct net_device_stats stats; +}; + +#define TX_TIMEOUT (3 * HZ) + +/* Index to functions, as function prototypes. */ + +static int sonic_open(struct net_device *dev); +static int sonic_send_packet(struct sk_buff *skb, struct net_device *dev); +static irqreturn_t sonic_interrupt(int irq, void *dev_id); +static void sonic_rx(struct net_device *dev); +static int sonic_close(struct net_device *dev); +static struct net_device_stats *sonic_get_stats(struct net_device *dev); +static void sonic_multicast_list(struct net_device *dev); +static int sonic_init(struct net_device *dev); +static void sonic_tx_timeout(struct net_device *dev); + +/* Internal inlines for reading/writing DMA buffers. Note that bus + size and endianness matter here, whereas they don't for registers, + as far as we can tell. */ +/* OpenBSD calls this "SWO". I'd like to think that sonic_buf_put() + is a much better name. */ +static inline void sonic_buf_put(void* base, int bitmode, + int offset, __u16 val) +{ + if (bitmode) +#ifdef __BIG_ENDIAN + ((__u16 *) base + (offset*2))[1] = val; +#else + ((__u16 *) base + (offset*2))[0] = val; +#endif + else + ((__u16 *) base)[offset] = val; +} + +static inline __u16 sonic_buf_get(void* base, int bitmode, + int offset) +{ + if (bitmode) +#ifdef __BIG_ENDIAN + return ((volatile __u16 *) base + (offset*2))[1]; +#else + return ((volatile __u16 *) base + (offset*2))[0]; +#endif + else + return ((volatile __u16 *) base)[offset]; +} + +/* Inlines that you should actually use for reading/writing DMA buffers */ +static inline void sonic_cda_put(struct net_device* dev, int entry, + int offset, __u16 val) +{ + struct sonic_local *lp = netdev_priv(dev); + sonic_buf_put(lp->cda, lp->dma_bitmode, + (entry * SIZEOF_SONIC_CD) + offset, val); +} + +static inline __u16 sonic_cda_get(struct net_device* dev, int entry, + int offset) +{ + struct sonic_local *lp = netdev_priv(dev); + return sonic_buf_get(lp->cda, lp->dma_bitmode, + (entry * SIZEOF_SONIC_CD) + offset); +} + +static inline void sonic_set_cam_enable(struct net_device* dev, __u16 val) +{ + struct sonic_local *lp = netdev_priv(dev); + sonic_buf_put(lp->cda, lp->dma_bitmode, SONIC_CDA_CAM_ENABLE, val); +} + +static inline __u16 sonic_get_cam_enable(struct net_device* dev) +{ + struct sonic_local *lp = netdev_priv(dev); + return sonic_buf_get(lp->cda, lp->dma_bitmode, SONIC_CDA_CAM_ENABLE); +} + +static inline void sonic_tda_put(struct net_device* dev, int entry, + int offset, __u16 val) +{ + struct sonic_local *lp = netdev_priv(dev); + sonic_buf_put(lp->tda, lp->dma_bitmode, + (entry * SIZEOF_SONIC_TD) + offset, val); +} + +static inline __u16 sonic_tda_get(struct net_device* dev, int entry, + int offset) +{ + struct sonic_local *lp = netdev_priv(dev); + return sonic_buf_get(lp->tda, lp->dma_bitmode, + (entry * SIZEOF_SONIC_TD) + offset); +} + +static inline void sonic_rda_put(struct net_device* dev, int entry, + int offset, __u16 val) +{ + struct sonic_local *lp = netdev_priv(dev); + sonic_buf_put(lp->rda, lp->dma_bitmode, + (entry * SIZEOF_SONIC_RD) + offset, val); +} + +static inline __u16 sonic_rda_get(struct net_device* dev, int entry, + int offset) +{ + struct sonic_local *lp = netdev_priv(dev); + return sonic_buf_get(lp->rda, lp->dma_bitmode, + (entry * SIZEOF_SONIC_RD) + offset); +} + +static inline void sonic_rra_put(struct net_device* dev, int entry, + int offset, __u16 val) +{ + struct sonic_local *lp = netdev_priv(dev); + sonic_buf_put(lp->rra, lp->dma_bitmode, + (entry * SIZEOF_SONIC_RR) + offset, val); +} + +static inline __u16 sonic_rra_get(struct net_device* dev, int entry, + int offset) +{ + struct sonic_local *lp = netdev_priv(dev); + return sonic_buf_get(lp->rra, lp->dma_bitmode, + (entry * SIZEOF_SONIC_RR) + offset); +} + +static const char *version = + "sonic.c:v0.92 20.9.98 tsbogend@alpha.franken.de\n"; + +#endif /* SONIC_H */ diff --git a/drivers/net/ethernet/natsemi/xtsonic.c b/drivers/net/ethernet/natsemi/xtsonic.c new file mode 100644 index 000000000000..9f12026d98e7 --- /dev/null +++ b/drivers/net/ethernet/natsemi/xtsonic.c @@ -0,0 +1,333 @@ +/* + * xtsonic.c + * + * (C) 2001 - 2007 Tensilica Inc. + * Kevin Chea + * Marc Gauthier + * Chris Zankel + * + * (C) 1996,1998 by Thomas Bogendoerfer (tsbogend@alpha.franken.de) + * + * This driver is based on work from Andreas Busse, but most of + * the code is rewritten. + * + * (C) 1995 by Andreas Busse (andy@waldorf-gmbh.de) + * + * A driver for the onboard Sonic ethernet controller on the XT2000. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +static char xtsonic_string[] = "xtsonic"; + +extern unsigned xtboard_nvram_valid(void); +extern void xtboard_get_ether_addr(unsigned char *buf); + +#include "sonic.h" + +/* + * According to the documentation for the Sonic ethernet controller, + * EOBC should be 760 words (1520 bytes) for 32-bit applications, and, + * as such, 2 words less than the buffer size. The value for RBSIZE + * defined in sonic.h, however is only 1520. + * + * (Note that in 16-bit configurations, EOBC is 759 words (1518 bytes) and + * RBSIZE 1520 bytes) + */ +#undef SONIC_RBSIZE +#define SONIC_RBSIZE 1524 + +/* + * The chip provides 256 byte register space. + */ +#define SONIC_MEM_SIZE 0x100 + +/* + * Macros to access SONIC registers + */ +#define SONIC_READ(reg) \ + (0xffff & *((volatile unsigned int *)dev->base_addr+reg)) + +#define SONIC_WRITE(reg,val) \ + *((volatile unsigned int *)dev->base_addr+reg) = val + + +/* Use 0 for production, 1 for verification, and >2 for debug */ +#ifdef SONIC_DEBUG +static unsigned int sonic_debug = SONIC_DEBUG; +#else +static unsigned int sonic_debug = 1; +#endif + +/* + * We cannot use station (ethernet) address prefixes to detect the + * sonic controller since these are board manufacturer depended. + * So we check for known Silicon Revision IDs instead. + */ +static unsigned short known_revisions[] = +{ + 0x101, /* SONIC 83934 */ + 0xffff /* end of list */ +}; + +static int xtsonic_open(struct net_device *dev) +{ + int retval; + + retval = request_irq(dev->irq, sonic_interrupt, IRQF_DISABLED, + "sonic", dev); + if (retval) { + printk(KERN_ERR "%s: unable to get IRQ %d.\n", + dev->name, dev->irq); + return -EAGAIN; + } + + retval = sonic_open(dev); + if (retval) + free_irq(dev->irq, dev); + return retval; +} + +static int xtsonic_close(struct net_device *dev) +{ + int err; + err = sonic_close(dev); + free_irq(dev->irq, dev); + return err; +} + +static const struct net_device_ops xtsonic_netdev_ops = { + .ndo_open = xtsonic_open, + .ndo_stop = xtsonic_close, + .ndo_start_xmit = sonic_send_packet, + .ndo_get_stats = sonic_get_stats, + .ndo_set_multicast_list = sonic_multicast_list, + .ndo_tx_timeout = sonic_tx_timeout, + .ndo_validate_addr = eth_validate_addr, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, +}; + +static int __init sonic_probe1(struct net_device *dev) +{ + static unsigned version_printed = 0; + unsigned int silicon_revision; + struct sonic_local *lp = netdev_priv(dev); + unsigned int base_addr = dev->base_addr; + int i; + int err = 0; + + if (!request_mem_region(base_addr, 0x100, xtsonic_string)) + return -EBUSY; + + /* + * get the Silicon Revision ID. If this is one of the known + * one assume that we found a SONIC ethernet controller at + * the expected location. + */ + silicon_revision = SONIC_READ(SONIC_SR); + if (sonic_debug > 1) + printk("SONIC Silicon Revision = 0x%04x\n",silicon_revision); + + i = 0; + while ((known_revisions[i] != 0xffff) && + (known_revisions[i] != silicon_revision)) + i++; + + if (known_revisions[i] == 0xffff) { + printk("SONIC ethernet controller not found (0x%4x)\n", + silicon_revision); + return -ENODEV; + } + + if (sonic_debug && version_printed++ == 0) + printk(version); + + /* + * Put the sonic into software reset, then retrieve ethernet address. + * Note: we are assuming that the boot-loader has initialized the cam. + */ + SONIC_WRITE(SONIC_CMD,SONIC_CR_RST); + SONIC_WRITE(SONIC_DCR, + SONIC_DCR_WC0|SONIC_DCR_DW|SONIC_DCR_LBR|SONIC_DCR_SBUS); + SONIC_WRITE(SONIC_CEP,0); + SONIC_WRITE(SONIC_IMR,0); + + SONIC_WRITE(SONIC_CMD,SONIC_CR_RST); + SONIC_WRITE(SONIC_CEP,0); + + for (i=0; i<3; i++) { + unsigned int val = SONIC_READ(SONIC_CAP0-i); + dev->dev_addr[i*2] = val; + dev->dev_addr[i*2+1] = val >> 8; + } + + /* Initialize the device structure. */ + + lp->dma_bitmode = SONIC_BITMODE32; + + /* + * Allocate local private descriptor areas in uncached space. + * The entire structure must be located within the same 64kb segment. + * A simple way to ensure this is to allocate twice the + * size of the structure -- given that the structure is + * much less than 64 kB, at least one of the halves of + * the allocated area will be contained entirely in 64 kB. + * We also allocate extra space for a pointer to allow freeing + * this structure later on (in xtsonic_cleanup_module()). + */ + lp->descriptors = + dma_alloc_coherent(lp->device, + SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode), + &lp->descriptors_laddr, GFP_KERNEL); + + if (lp->descriptors == NULL) { + printk(KERN_ERR "%s: couldn't alloc DMA memory for " + " descriptors.\n", dev_name(lp->device)); + goto out; + } + + lp->cda = lp->descriptors; + lp->tda = lp->cda + (SIZEOF_SONIC_CDA + * SONIC_BUS_SCALE(lp->dma_bitmode)); + lp->rda = lp->tda + (SIZEOF_SONIC_TD * SONIC_NUM_TDS + * SONIC_BUS_SCALE(lp->dma_bitmode)); + lp->rra = lp->rda + (SIZEOF_SONIC_RD * SONIC_NUM_RDS + * SONIC_BUS_SCALE(lp->dma_bitmode)); + + /* get the virtual dma address */ + + lp->cda_laddr = lp->descriptors_laddr; + lp->tda_laddr = lp->cda_laddr + (SIZEOF_SONIC_CDA + * SONIC_BUS_SCALE(lp->dma_bitmode)); + lp->rda_laddr = lp->tda_laddr + (SIZEOF_SONIC_TD * SONIC_NUM_TDS + * SONIC_BUS_SCALE(lp->dma_bitmode)); + lp->rra_laddr = lp->rda_laddr + (SIZEOF_SONIC_RD * SONIC_NUM_RDS + * SONIC_BUS_SCALE(lp->dma_bitmode)); + + dev->netdev_ops = &xtsonic_netdev_ops; + dev->watchdog_timeo = TX_TIMEOUT; + + /* + * clear tally counter + */ + SONIC_WRITE(SONIC_CRCT,0xffff); + SONIC_WRITE(SONIC_FAET,0xffff); + SONIC_WRITE(SONIC_MPT,0xffff); + + return 0; +out: + release_region(dev->base_addr, SONIC_MEM_SIZE); + return err; +} + + +/* + * Probe for a SONIC ethernet controller on an XT2000 board. + * Actually probing is superfluous but we're paranoid. + */ + +int __devinit xtsonic_probe(struct platform_device *pdev) +{ + struct net_device *dev; + struct sonic_local *lp; + struct resource *resmem, *resirq; + int err = 0; + + if ((resmem = platform_get_resource(pdev, IORESOURCE_MEM, 0)) == NULL) + return -ENODEV; + + if ((resirq = platform_get_resource(pdev, IORESOURCE_IRQ, 0)) == NULL) + return -ENODEV; + + if ((dev = alloc_etherdev(sizeof(struct sonic_local))) == NULL) + return -ENOMEM; + + lp = netdev_priv(dev); + lp->device = &pdev->dev; + SET_NETDEV_DEV(dev, &pdev->dev); + netdev_boot_setup_check(dev); + + dev->base_addr = resmem->start; + dev->irq = resirq->start; + + if ((err = sonic_probe1(dev))) + goto out; + if ((err = register_netdev(dev))) + goto out1; + + printk("%s: SONIC ethernet @%08lx, MAC %pM, IRQ %d\n", dev->name, + dev->base_addr, dev->dev_addr, dev->irq); + + return 0; + +out1: + release_region(dev->base_addr, SONIC_MEM_SIZE); +out: + free_netdev(dev); + + return err; +} + +MODULE_DESCRIPTION("Xtensa XT2000 SONIC ethernet driver"); +module_param(sonic_debug, int, 0); +MODULE_PARM_DESC(sonic_debug, "xtsonic debug level (1-4)"); + +#include "sonic.c" + +static int __devexit xtsonic_device_remove (struct platform_device *pdev) +{ + struct net_device *dev = platform_get_drvdata(pdev); + struct sonic_local *lp = netdev_priv(dev); + + unregister_netdev(dev); + dma_free_coherent(lp->device, + SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode), + lp->descriptors, lp->descriptors_laddr); + release_region (dev->base_addr, SONIC_MEM_SIZE); + free_netdev(dev); + + return 0; +} + +static struct platform_driver xtsonic_driver = { + .probe = xtsonic_probe, + .remove = __devexit_p(xtsonic_device_remove), + .driver = { + .name = xtsonic_string, + }, +}; + +static int __init xtsonic_init(void) +{ + return platform_driver_register(&xtsonic_driver); +} + +static void __exit xtsonic_cleanup(void) +{ + platform_driver_unregister(&xtsonic_driver); +} + +module_init(xtsonic_init); +module_exit(xtsonic_cleanup); diff --git a/drivers/net/ibmlana.c b/drivers/net/ibmlana.c deleted file mode 100644 index a7d6cad32953..000000000000 --- a/drivers/net/ibmlana.c +++ /dev/null @@ -1,1075 +0,0 @@ -/* -net-3-driver for the IBM LAN Adapter/A - -This is an extension to the Linux operating system, and is covered by the -same GNU General Public License that covers that work. - -Copyright 1999 by Alfred Arnold (alfred@ccac.rwth-aachen.de, - alfred.arnold@lancom.de) - -This driver is based both on the SK_MCA driver, which is itself based on the -SK_G16 and 3C523 driver. - -paper sources: - 'PC Hardware: Aufbau, Funktionsweise, Programmierung' by - Hans-Peter Messmer for the basic Microchannel stuff - - 'Linux Geraetetreiber' by Allesandro Rubini, Kalle Dalheimer - for help on Ethernet driver programming - - 'DP83934CVUL-20/25 MHz SONIC-T Ethernet Controller Datasheet' by National - Semiconductor for info on the MAC chip - - 'LAN Technical Reference Ethernet Adapter Interface Version 1 Release 1.0 - Document Number SC30-3661-00' by IBM for info on the adapter itself - - Also see http://www.national.com/analog - -special acknowledgements to: - - Bob Eager for helping me out with documentation from IBM - - Jim Shorney for his endless patience with me while I was using - him as a beta tester to trace down the address filter bug ;-) - - Missing things: - - -> set debug level via ioctl instead of compile-time switches - -> I didn't follow the development of the 2.1.x kernels, so my - assumptions about which things changed with which kernel version - are probably nonsense - -History: - Nov 6th, 1999 - startup from SK_MCA driver - Dec 6th, 1999 - finally got docs about the card. A big thank you to Bob Eager! - Dec 12th, 1999 - first packet received - Dec 13th, 1999 - recv queue done, tcpdump works - Dec 15th, 1999 - transmission part works - Dec 28th, 1999 - added usage of the isa_functions for Linux 2.3 . Things should - still work with 2.0.x.... - Jan 28th, 2000 - in Linux 2.2.13, the version.h file mysteriously didn't get - included. Added a workaround for this. Furthermore, it now - not only compiles as a modules ;-) - Jan 30th, 2000 - newer kernels automatically probe more than one board, so the - 'startslot' as a variable is also needed here - Apr 12th, 2000 - the interrupt mask register is not set 'hard' instead of individually - setting registers, since this seems to set bits that shouldn't be - set - May 21st, 2000 - reset interrupt status immediately after CAM load - add a recovery delay after releasing the chip's reset line - May 24th, 2000 - finally found the bug in the address filter setup - damned signed - chars! - June 1st, 2000 - corrected version codes, added support for the latest 2.3 changes - Oct 28th, 2002 - cleaned up for the 2.5 tree - - *************************************************************************/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#define _IBM_LANA_DRIVER_ -#include "ibmlana.h" - -#undef DEBUG - -#define DRV_NAME "ibmlana" - -/* ------------------------------------------------------------------------ - * global static data - not more since we can handle multiple boards and - * have to pack all state info into the device struct! - * ------------------------------------------------------------------------ */ - -static char *MediaNames[Media_Count] = { - "10BaseT", "10Base5", "Unknown", "10Base2" -}; - -/* ------------------------------------------------------------------------ - * private subfunctions - * ------------------------------------------------------------------------ */ - -#ifdef DEBUG - /* dump all registers */ - -static void dumpregs(struct net_device *dev) -{ - int z; - - for (z = 0; z < 160; z += 2) { - if (!(z & 15)) - printk("REGS: %04x:", z); - printk(" %04x", inw(dev->base_addr + z)); - if ((z & 15) == 14) - printk("\n"); - } -} - -/* dump parts of shared memory - only needed during debugging */ - -static void dumpmem(struct net_device *dev, u32 start, u32 len) -{ - ibmlana_priv *priv = netdev_priv(dev); - int z; - - printk("Address %04x:\n", start); - for (z = 0; z < len; z++) { - if ((z & 15) == 0) - printk("%04x:", z); - printk(" %02x", readb(priv->base + start + z)); - if ((z & 15) == 15) - printk("\n"); - } - if ((z & 15) != 0) - printk("\n"); -} - -/* print exact time - ditto */ - -static void PrTime(void) -{ - struct timeval tv; - - do_gettimeofday(&tv); - printk("%9d:%06d: ", (int) tv.tv_sec, (int) tv.tv_usec); -} -#endif /* DEBUG */ - -/* deduce resources out of POS registers */ - -static void getaddrs(struct mca_device *mdev, int *base, int *memlen, - int *iobase, int *irq, ibmlana_medium *medium) -{ - u_char pos0, pos1; - - pos0 = mca_device_read_stored_pos(mdev, 2); - pos1 = mca_device_read_stored_pos(mdev, 3); - - *base = 0xc0000 + ((pos1 & 0xf0) << 9); - *memlen = (pos1 & 0x01) ? 0x8000 : 0x4000; - *iobase = (pos0 & 0xe0) << 7; - switch (pos0 & 0x06) { - case 0: - *irq = 5; - break; - case 2: - *irq = 15; - break; - case 4: - *irq = 10; - break; - case 6: - *irq = 11; - break; - } - *medium = (pos0 & 0x18) >> 3; -} - -/* wait on register value with mask and timeout */ - -static int wait_timeout(struct net_device *dev, int regoffs, u16 mask, - u16 value, int timeout) -{ - unsigned long fin = jiffies + timeout; - - while (time_before(jiffies,fin)) - if ((inw(dev->base_addr + regoffs) & mask) == value) - return 1; - - return 0; -} - - -/* reset the whole board */ - -static void ResetBoard(struct net_device *dev) -{ - unsigned char bcmval; - - /* read original board control value */ - - bcmval = inb(dev->base_addr + BCMREG); - - /* set reset bit for a while */ - - bcmval |= BCMREG_RESET; - outb(bcmval, dev->base_addr + BCMREG); - udelay(10); - bcmval &= ~BCMREG_RESET; - outb(bcmval, dev->base_addr + BCMREG); - - /* switch over to RAM again */ - - bcmval |= BCMREG_RAMEN | BCMREG_RAMWIN; - outb(bcmval, dev->base_addr + BCMREG); -} - -/* calculate RAM layout & set up descriptors in RAM */ - -static void InitDscrs(struct net_device *dev) -{ - ibmlana_priv *priv = netdev_priv(dev); - u32 addr, baddr, raddr; - int z; - tda_t tda; - rda_t rda; - rra_t rra; - - /* initialize RAM */ - - memset_io(priv->base, 0xaa, - dev->mem_start - dev->mem_start); /* XXX: typo? */ - - /* setup n TX descriptors - independent of RAM size */ - - priv->tdastart = addr = 0; - priv->txbufstart = baddr = sizeof(tda_t) * TXBUFCNT; - for (z = 0; z < TXBUFCNT; z++) { - tda.status = 0; - tda.config = 0; - tda.length = 0; - tda.fragcount = 1; - tda.startlo = baddr; - tda.starthi = 0; - tda.fraglength = 0; - if (z == TXBUFCNT - 1) - tda.link = priv->tdastart; - else - tda.link = addr + sizeof(tda_t); - tda.link |= 1; - memcpy_toio(priv->base + addr, &tda, sizeof(tda_t)); - addr += sizeof(tda_t); - baddr += PKTSIZE; - } - - /* calculate how many receive buffers fit into remaining memory */ - - priv->rxbufcnt = (dev->mem_end - dev->mem_start - baddr) / (sizeof(rra_t) + sizeof(rda_t) + PKTSIZE); - - /* calculate receive addresses */ - - priv->rrastart = raddr = priv->txbufstart + (TXBUFCNT * PKTSIZE); - priv->rdastart = addr = priv->rrastart + (priv->rxbufcnt * sizeof(rra_t)); - priv->rxbufstart = baddr = priv->rdastart + (priv->rxbufcnt * sizeof(rda_t)); - - for (z = 0; z < priv->rxbufcnt; z++) { - rra.startlo = baddr; - rra.starthi = 0; - rra.cntlo = PKTSIZE >> 1; - rra.cnthi = 0; - memcpy_toio(priv->base + raddr, &rra, sizeof(rra_t)); - - rda.status = 0; - rda.length = 0; - rda.startlo = 0; - rda.starthi = 0; - rda.seqno = 0; - if (z < priv->rxbufcnt - 1) - rda.link = addr + sizeof(rda_t); - else - rda.link = 1; - rda.inuse = 1; - memcpy_toio(priv->base + addr, &rda, sizeof(rda_t)); - - baddr += PKTSIZE; - raddr += sizeof(rra_t); - addr += sizeof(rda_t); - } - - /* initialize current pointers */ - - priv->nextrxdescr = 0; - priv->lastrxdescr = priv->rxbufcnt - 1; - priv->nexttxdescr = 0; - priv->currtxdescr = 0; - priv->txusedcnt = 0; - memset(priv->txused, 0, sizeof(priv->txused)); -} - -/* set up Rx + Tx descriptors in SONIC */ - -static int InitSONIC(struct net_device *dev) -{ - ibmlana_priv *priv = netdev_priv(dev); - - /* set up start & end of resource area */ - - outw(0, SONIC_URRA); - outw(priv->rrastart, dev->base_addr + SONIC_RSA); - outw(priv->rrastart + (priv->rxbufcnt * sizeof(rra_t)), dev->base_addr + SONIC_REA); - outw(priv->rrastart, dev->base_addr + SONIC_RRP); - outw(priv->rrastart, dev->base_addr + SONIC_RWP); - - /* set EOBC so that only one packet goes into one buffer */ - - outw((PKTSIZE - 4) >> 1, dev->base_addr + SONIC_EOBC); - - /* let SONIC read the first RRA descriptor */ - - outw(CMDREG_RRRA, dev->base_addr + SONIC_CMDREG); - if (!wait_timeout(dev, SONIC_CMDREG, CMDREG_RRRA, 0, 2)) { - printk(KERN_ERR "%s: SONIC did not respond on RRRA command - giving up.", dev->name); - return 0; - } - - /* point SONIC to the first RDA */ - - outw(0, dev->base_addr + SONIC_URDA); - outw(priv->rdastart, dev->base_addr + SONIC_CRDA); - - /* set upper half of TDA address */ - - outw(0, dev->base_addr + SONIC_UTDA); - - return 1; -} - -/* stop SONIC so we can reinitialize it */ - -static void StopSONIC(struct net_device *dev) -{ - /* disable interrupts */ - - outb(inb(dev->base_addr + BCMREG) & (~BCMREG_IEN), dev->base_addr + BCMREG); - outb(0, dev->base_addr + SONIC_IMREG); - - /* reset the SONIC */ - - outw(CMDREG_RST, dev->base_addr + SONIC_CMDREG); - udelay(10); - outw(CMDREG_RST, dev->base_addr + SONIC_CMDREG); -} - -/* initialize card and SONIC for proper operation */ - -static void putcam(camentry_t * cams, int *camcnt, char *addr) -{ - camentry_t *pcam = cams + (*camcnt); - u8 *uaddr = (u8 *) addr; - - pcam->index = *camcnt; - pcam->addr0 = (((u16) uaddr[1]) << 8) | uaddr[0]; - pcam->addr1 = (((u16) uaddr[3]) << 8) | uaddr[2]; - pcam->addr2 = (((u16) uaddr[5]) << 8) | uaddr[4]; - (*camcnt)++; -} - -static void InitBoard(struct net_device *dev) -{ - ibmlana_priv *priv = netdev_priv(dev); - int camcnt; - camentry_t cams[16]; - u32 cammask; - struct netdev_hw_addr *ha; - u16 rcrval; - - /* reset the SONIC */ - - outw(CMDREG_RST, dev->base_addr + SONIC_CMDREG); - udelay(10); - - /* clear all spurious interrupts */ - - outw(inw(dev->base_addr + SONIC_ISREG), dev->base_addr + SONIC_ISREG); - - /* set up the SONIC's bus interface - constant for this adapter - - must be done while the SONIC is in reset */ - - outw(DCREG_USR1 | DCREG_USR0 | DCREG_WC1 | DCREG_DW32, dev->base_addr + SONIC_DCREG); - outw(0, dev->base_addr + SONIC_DCREG2); - - /* remove reset form the SONIC */ - - outw(0, dev->base_addr + SONIC_CMDREG); - udelay(10); - - /* data sheet requires URRA to be programmed before setting up the CAM contents */ - - outw(0, dev->base_addr + SONIC_URRA); - - /* program the CAM entry 0 to the device address */ - - camcnt = 0; - putcam(cams, &camcnt, dev->dev_addr); - - /* start putting the multicast addresses into the CAM list. Stop if - it is full. */ - - netdev_for_each_mc_addr(ha, dev) { - putcam(cams, &camcnt, ha->addr); - if (camcnt == 16) - break; - } - - /* calculate CAM mask */ - - cammask = (1 << camcnt) - 1; - - /* feed CDA into SONIC, initialize RCR value (always get broadcasts) */ - - memcpy_toio(priv->base, cams, sizeof(camentry_t) * camcnt); - memcpy_toio(priv->base + (sizeof(camentry_t) * camcnt), &cammask, sizeof(cammask)); - -#ifdef DEBUG - printk("CAM setup:\n"); - dumpmem(dev, 0, sizeof(camentry_t) * camcnt + sizeof(cammask)); -#endif - - outw(0, dev->base_addr + SONIC_CAMPTR); - outw(camcnt, dev->base_addr + SONIC_CAMCNT); - outw(CMDREG_LCAM, dev->base_addr + SONIC_CMDREG); - if (!wait_timeout(dev, SONIC_CMDREG, CMDREG_LCAM, 0, 2)) { - printk(KERN_ERR "%s:SONIC did not respond on LCAM command - giving up.", dev->name); - return; - } else { - /* clear interrupt condition */ - - outw(ISREG_LCD, dev->base_addr + SONIC_ISREG); - -#ifdef DEBUG - printk("Loading CAM done, address pointers %04x:%04x\n", - inw(dev->base_addr + SONIC_URRA), - inw(dev->base_addr + SONIC_CAMPTR)); - { - int z; - - printk("\n-->CAM: PTR %04x CNT %04x\n", - inw(dev->base_addr + SONIC_CAMPTR), - inw(dev->base_addr + SONIC_CAMCNT)); - outw(CMDREG_RST, dev->base_addr + SONIC_CMDREG); - for (z = 0; z < camcnt; z++) { - outw(z, dev->base_addr + SONIC_CAMEPTR); - printk("Entry %d: %04x %04x %04x\n", z, - inw(dev->base_addr + SONIC_CAMADDR0), - inw(dev->base_addr + SONIC_CAMADDR1), - inw(dev->base_addr + SONIC_CAMADDR2)); - } - outw(0, dev->base_addr + SONIC_CMDREG); - } -#endif - } - - rcrval = RCREG_BRD | RCREG_LB_NONE; - - /* if still multicast addresses left or ALLMULTI is set, set the multicast - enable bit */ - - if ((dev->flags & IFF_ALLMULTI) || netdev_mc_count(dev) > camcnt) - rcrval |= RCREG_AMC; - - /* promiscuous mode ? */ - - if (dev->flags & IFF_PROMISC) - rcrval |= RCREG_PRO; - - /* program receive mode */ - - outw(rcrval, dev->base_addr + SONIC_RCREG); -#ifdef DEBUG - printk("\nRCRVAL: %04x\n", rcrval); -#endif - - /* set up descriptors in shared memory + feed them into SONIC registers */ - - InitDscrs(dev); - if (!InitSONIC(dev)) - return; - - /* reset all pending interrupts */ - - outw(0xffff, dev->base_addr + SONIC_ISREG); - - /* enable transmitter + receiver interrupts */ - - outw(CMDREG_RXEN, dev->base_addr + SONIC_CMDREG); - outw(IMREG_PRXEN | IMREG_RBEEN | IMREG_PTXEN | IMREG_TXEREN, dev->base_addr + SONIC_IMREG); - - /* turn on card interrupts */ - - outb(inb(dev->base_addr + BCMREG) | BCMREG_IEN, dev->base_addr + BCMREG); - -#ifdef DEBUG - printk("Register dump after initialization:\n"); - dumpregs(dev); -#endif -} - -/* start transmission of a descriptor */ - -static void StartTx(struct net_device *dev, int descr) -{ - ibmlana_priv *priv = netdev_priv(dev); - int addr; - - addr = priv->tdastart + (descr * sizeof(tda_t)); - - /* put descriptor address into SONIC */ - - outw(addr, dev->base_addr + SONIC_CTDA); - - /* trigger transmitter */ - - priv->currtxdescr = descr; - outw(CMDREG_TXP, dev->base_addr + SONIC_CMDREG); -} - -/* ------------------------------------------------------------------------ - * interrupt handler(s) - * ------------------------------------------------------------------------ */ - -/* receive buffer area exhausted */ - -static void irqrbe_handler(struct net_device *dev) -{ - ibmlana_priv *priv = netdev_priv(dev); - - /* point the SONIC back to the RRA start */ - - outw(priv->rrastart, dev->base_addr + SONIC_RRP); - outw(priv->rrastart, dev->base_addr + SONIC_RWP); -} - -/* receive interrupt */ - -static void irqrx_handler(struct net_device *dev) -{ - ibmlana_priv *priv = netdev_priv(dev); - rda_t rda; - u32 rdaaddr, lrdaaddr; - - /* loop until ... */ - - while (1) { - /* read descriptor that was next to be filled by SONIC */ - - rdaaddr = priv->rdastart + (priv->nextrxdescr * sizeof(rda_t)); - lrdaaddr = priv->rdastart + (priv->lastrxdescr * sizeof(rda_t)); - memcpy_fromio(&rda, priv->base + rdaaddr, sizeof(rda_t)); - - /* iron out upper word halves of fields we use - SONIC will duplicate - bits 0..15 to 16..31 */ - - rda.status &= 0xffff; - rda.length &= 0xffff; - rda.startlo &= 0xffff; - - /* stop if the SONIC still owns it, i.e. there is no data for us */ - - if (rda.inuse) - break; - - /* good packet? */ - - else if (rda.status & RCREG_PRX) { - struct sk_buff *skb; - - /* fetch buffer */ - - skb = dev_alloc_skb(rda.length + 2); - if (skb == NULL) - dev->stats.rx_dropped++; - else { - /* copy out data */ - - memcpy_fromio(skb_put(skb, rda.length), - priv->base + - rda.startlo, rda.length); - - /* set up skb fields */ - - skb->protocol = eth_type_trans(skb, dev); - skb_checksum_none_assert(skb); - - /* bookkeeping */ - dev->stats.rx_packets++; - dev->stats.rx_bytes += rda.length; - - /* pass to the upper layers */ - netif_rx(skb); - } - } - - /* otherwise check error status bits and increase statistics */ - - else { - dev->stats.rx_errors++; - if (rda.status & RCREG_FAER) - dev->stats.rx_frame_errors++; - if (rda.status & RCREG_CRCR) - dev->stats.rx_crc_errors++; - } - - /* descriptor processed, will become new last descriptor in queue */ - - rda.link = 1; - rda.inuse = 1; - memcpy_toio(priv->base + rdaaddr, &rda, - sizeof(rda_t)); - - /* set up link and EOL = 0 in currently last descriptor. Only write - the link field since the SONIC may currently already access the - other fields. */ - - memcpy_toio(priv->base + lrdaaddr + 20, &rdaaddr, 4); - - /* advance indices */ - - priv->lastrxdescr = priv->nextrxdescr; - if ((++priv->nextrxdescr) >= priv->rxbufcnt) - priv->nextrxdescr = 0; - } -} - -/* transmit interrupt */ - -static void irqtx_handler(struct net_device *dev) -{ - ibmlana_priv *priv = netdev_priv(dev); - tda_t tda; - - /* fetch descriptor (we forgot the size ;-) */ - memcpy_fromio(&tda, priv->base + priv->tdastart + (priv->currtxdescr * sizeof(tda_t)), sizeof(tda_t)); - - /* update statistics */ - dev->stats.tx_packets++; - dev->stats.tx_bytes += tda.length; - - /* update our pointers */ - priv->txused[priv->currtxdescr] = 0; - priv->txusedcnt--; - - /* if there are more descriptors present in RAM, start them */ - if (priv->txusedcnt > 0) - StartTx(dev, (priv->currtxdescr + 1) % TXBUFCNT); - - /* tell the upper layer we can go on transmitting */ - netif_wake_queue(dev); -} - -static void irqtxerr_handler(struct net_device *dev) -{ - ibmlana_priv *priv = netdev_priv(dev); - tda_t tda; - - /* fetch descriptor to check status */ - memcpy_fromio(&tda, priv->base + priv->tdastart + (priv->currtxdescr * sizeof(tda_t)), sizeof(tda_t)); - - /* update statistics */ - dev->stats.tx_errors++; - if (tda.status & (TCREG_NCRS | TCREG_CRSL)) - dev->stats.tx_carrier_errors++; - if (tda.status & TCREG_EXC) - dev->stats.tx_aborted_errors++; - if (tda.status & TCREG_OWC) - dev->stats.tx_window_errors++; - if (tda.status & TCREG_FU) - dev->stats.tx_fifo_errors++; - - /* update our pointers */ - priv->txused[priv->currtxdescr] = 0; - priv->txusedcnt--; - - /* if there are more descriptors present in RAM, start them */ - if (priv->txusedcnt > 0) - StartTx(dev, (priv->currtxdescr + 1) % TXBUFCNT); - - /* tell the upper layer we can go on transmitting */ - netif_wake_queue(dev); -} - -/* general interrupt entry */ - -static irqreturn_t irq_handler(int dummy, void *device) -{ - struct net_device *dev = device; - u16 ival; - - /* in case we're not meant... */ - if (!(inb(dev->base_addr + BCMREG) & BCMREG_IPEND)) - return IRQ_NONE; - - /* loop through the interrupt bits until everything is clear */ - while (1) { - ival = inw(dev->base_addr + SONIC_ISREG); - - if (ival & ISREG_RBE) { - irqrbe_handler(dev); - outw(ISREG_RBE, dev->base_addr + SONIC_ISREG); - } - if (ival & ISREG_PKTRX) { - irqrx_handler(dev); - outw(ISREG_PKTRX, dev->base_addr + SONIC_ISREG); - } - if (ival & ISREG_TXDN) { - irqtx_handler(dev); - outw(ISREG_TXDN, dev->base_addr + SONIC_ISREG); - } - if (ival & ISREG_TXER) { - irqtxerr_handler(dev); - outw(ISREG_TXER, dev->base_addr + SONIC_ISREG); - } - break; - } - return IRQ_HANDLED; -} - -/* ------------------------------------------------------------------------ - * driver methods - * ------------------------------------------------------------------------ */ - -/* MCA info */ - -#if 0 /* info available elsewhere, but this is kept for reference */ -static int ibmlana_getinfo(char *buf, int slot, void *d) -{ - int len = 0, i; - struct net_device *dev = (struct net_device *) d; - ibmlana_priv *priv; - - /* can't say anything about an uninitialized device... */ - - if (dev == NULL) - return len; - priv = netdev_priv(dev); - - /* print info */ - - len += sprintf(buf + len, "IRQ: %d\n", priv->realirq); - len += sprintf(buf + len, "I/O: %#lx\n", dev->base_addr); - len += sprintf(buf + len, "Memory: %#lx-%#lx\n", dev->mem_start, dev->mem_end - 1); - len += sprintf(buf + len, "Transceiver: %s\n", MediaNames[priv->medium]); - len += sprintf(buf + len, "Device: %s\n", dev->name); - len += sprintf(buf + len, "MAC address:"); - for (i = 0; i < 6; i++) - len += sprintf(buf + len, " %02x", dev->dev_addr[i]); - buf[len++] = '\n'; - buf[len] = 0; - - return len; -} -#endif - -/* open driver. Means also initialization and start of LANCE */ - -static int ibmlana_open(struct net_device *dev) -{ - int result; - ibmlana_priv *priv = netdev_priv(dev); - - /* register resources - only necessary for IRQ */ - - result = request_irq(priv->realirq, irq_handler, IRQF_SHARED, - dev->name, dev); - if (result != 0) { - printk(KERN_ERR "%s: failed to register irq %d\n", dev->name, dev->irq); - return result; - } - dev->irq = priv->realirq; - - /* set up the card and SONIC */ - InitBoard(dev); - - /* initialize operational flags */ - netif_start_queue(dev); - return 0; -} - -/* close driver. Shut down board and free allocated resources */ - -static int ibmlana_close(struct net_device *dev) -{ - /* turn off board */ - - /* release resources */ - if (dev->irq != 0) - free_irq(dev->irq, dev); - dev->irq = 0; - return 0; -} - -/* transmit a block. */ - -static netdev_tx_t ibmlana_tx(struct sk_buff *skb, struct net_device *dev) -{ - ibmlana_priv *priv = netdev_priv(dev); - int tmplen, addr; - unsigned long flags; - tda_t tda; - int baddr; - - /* find out if there are free slots for a frame to transmit. If not, - the upper layer is in deep desperation and we simply ignore the frame. */ - - if (priv->txusedcnt >= TXBUFCNT) { - dev->stats.tx_dropped++; - goto tx_done; - } - - /* copy the frame data into the next free transmit buffer - fillup missing */ - tmplen = skb->len; - if (tmplen < 60) - tmplen = 60; - baddr = priv->txbufstart + (priv->nexttxdescr * PKTSIZE); - memcpy_toio(priv->base + baddr, skb->data, skb->len); - - /* copy filler into RAM - in case we're filling up... - we're filling a bit more than necessary, but that doesn't harm - since the buffer is far larger... - Sorry Linus for the filler string but I couldn't resist ;-) */ - - if (tmplen > skb->len) { - char *fill = "NetBSD is a nice OS too! "; - unsigned int destoffs = skb->len, l = strlen(fill); - - while (destoffs < tmplen) { - memcpy_toio(priv->base + baddr + destoffs, fill, l); - destoffs += l; - } - } - - /* set up the new frame descriptor */ - addr = priv->tdastart + (priv->nexttxdescr * sizeof(tda_t)); - memcpy_fromio(&tda, priv->base + addr, sizeof(tda_t)); - tda.length = tda.fraglength = tmplen; - memcpy_toio(priv->base + addr, &tda, sizeof(tda_t)); - - /* if there were no active descriptors, trigger the SONIC */ - spin_lock_irqsave(&priv->lock, flags); - - priv->txusedcnt++; - priv->txused[priv->nexttxdescr] = 1; - - /* are all transmission slots used up ? */ - if (priv->txusedcnt >= TXBUFCNT) - netif_stop_queue(dev); - - if (priv->txusedcnt == 1) - StartTx(dev, priv->nexttxdescr); - priv->nexttxdescr = (priv->nexttxdescr + 1) % TXBUFCNT; - - spin_unlock_irqrestore(&priv->lock, flags); -tx_done: - dev_kfree_skb(skb); - return NETDEV_TX_OK; -} - -/* switch receiver mode. */ - -static void ibmlana_set_multicast_list(struct net_device *dev) -{ - /* first stop the SONIC... */ - StopSONIC(dev); - /* ...then reinit it with the new flags */ - InitBoard(dev); -} - -/* ------------------------------------------------------------------------ - * hardware check - * ------------------------------------------------------------------------ */ - -static int ibmlana_irq; -static int ibmlana_io; -static int startslot; /* counts through slots when probing multiple devices */ - -static short ibmlana_adapter_ids[] __initdata = { - IBM_LANA_ID, - 0x0000 -}; - -static char *ibmlana_adapter_names[] __devinitdata = { - "IBM LAN Adapter/A", - NULL -}; - - -static const struct net_device_ops ibmlana_netdev_ops = { - .ndo_open = ibmlana_open, - .ndo_stop = ibmlana_close, - .ndo_start_xmit = ibmlana_tx, - .ndo_set_multicast_list = ibmlana_set_multicast_list, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -}; - -static int __devinit ibmlana_init_one(struct device *kdev) -{ - struct mca_device *mdev = to_mca_device(kdev); - struct net_device *dev; - int slot = mdev->slot, z, rc; - int base = 0, irq = 0, iobase = 0, memlen = 0; - ibmlana_priv *priv; - ibmlana_medium medium; - - dev = alloc_etherdev(sizeof(ibmlana_priv)); - if (!dev) - return -ENOMEM; - - dev->irq = ibmlana_irq; - dev->base_addr = ibmlana_io; - - base = dev->mem_start; - irq = dev->irq; - - /* deduce card addresses */ - getaddrs(mdev, &base, &memlen, &iobase, &irq, &medium); - - /* were we looking for something different ? */ - if (dev->irq && dev->irq != irq) { - rc = -ENODEV; - goto err_out; - } - if (dev->mem_start && dev->mem_start != base) { - rc = -ENODEV; - goto err_out; - } - - /* announce success */ - printk(KERN_INFO "%s: IBM LAN Adapter/A found in slot %d\n", dev->name, slot + 1); - - /* try to obtain I/O range */ - if (!request_region(iobase, IBM_LANA_IORANGE, DRV_NAME)) { - printk(KERN_ERR "%s: cannot allocate I/O range at %#x!\n", DRV_NAME, iobase); - startslot = slot + 1; - rc = -EBUSY; - goto err_out; - } - - priv = netdev_priv(dev); - priv->slot = slot; - priv->realirq = mca_device_transform_irq(mdev, irq); - priv->medium = medium; - spin_lock_init(&priv->lock); - - /* set base + irq for this device (irq not allocated so far) */ - - dev->irq = 0; - dev->mem_start = base; - dev->mem_end = base + memlen; - dev->base_addr = iobase; - - priv->base = ioremap(base, memlen); - if (!priv->base) { - printk(KERN_ERR "%s: cannot remap memory!\n", DRV_NAME); - startslot = slot + 1; - rc = -EBUSY; - goto err_out_reg; - } - - mca_device_set_name(mdev, ibmlana_adapter_names[mdev->index]); - mca_device_set_claim(mdev, 1); - - /* set methods */ - dev->netdev_ops = &ibmlana_netdev_ops; - dev->flags |= IFF_MULTICAST; - - /* copy out MAC address */ - - for (z = 0; z < ETH_ALEN; z++) - dev->dev_addr[z] = inb(dev->base_addr + MACADDRPROM + z); - - /* print config */ - - printk(KERN_INFO "%s: IRQ %d, I/O %#lx, memory %#lx-%#lx, " - "MAC address %pM.\n", - dev->name, priv->realirq, dev->base_addr, - dev->mem_start, dev->mem_end - 1, - dev->dev_addr); - printk(KERN_INFO "%s: %s medium\n", dev->name, MediaNames[priv->medium]); - - /* reset board */ - - ResetBoard(dev); - - /* next probe will start at next slot */ - - startslot = slot + 1; - - rc = register_netdev(dev); - if (rc) - goto err_out_claimed; - - dev_set_drvdata(kdev, dev); - return 0; - -err_out_claimed: - mca_device_set_claim(mdev, 0); - iounmap(priv->base); -err_out_reg: - release_region(iobase, IBM_LANA_IORANGE); -err_out: - free_netdev(dev); - return rc; -} - -static int ibmlana_remove_one(struct device *kdev) -{ - struct mca_device *mdev = to_mca_device(kdev); - struct net_device *dev = dev_get_drvdata(kdev); - ibmlana_priv *priv = netdev_priv(dev); - - unregister_netdev(dev); - /*DeinitBoard(dev); */ - release_region(dev->base_addr, IBM_LANA_IORANGE); - mca_device_set_claim(mdev, 0); - iounmap(priv->base); - free_netdev(dev); - return 0; -} - -/* ------------------------------------------------------------------------ - * modularization support - * ------------------------------------------------------------------------ */ - -module_param_named(irq, ibmlana_irq, int, 0); -module_param_named(io, ibmlana_io, int, 0); -MODULE_PARM_DESC(irq, "IBM LAN/A IRQ number"); -MODULE_PARM_DESC(io, "IBM LAN/A I/O base address"); -MODULE_LICENSE("GPL"); - -static struct mca_driver ibmlana_driver = { - .id_table = ibmlana_adapter_ids, - .driver = { - .name = "ibmlana", - .bus = &mca_bus_type, - .probe = ibmlana_init_one, - .remove = ibmlana_remove_one, - }, -}; - -static int __init ibmlana_init_module(void) -{ - return mca_register_driver(&ibmlana_driver); -} - -static void __exit ibmlana_cleanup_module(void) -{ - mca_unregister_driver(&ibmlana_driver); -} - -module_init(ibmlana_init_module); -module_exit(ibmlana_cleanup_module); diff --git a/drivers/net/ibmlana.h b/drivers/net/ibmlana.h deleted file mode 100644 index accd5efc9c8a..000000000000 --- a/drivers/net/ibmlana.h +++ /dev/null @@ -1,278 +0,0 @@ -#ifndef _IBM_LANA_INCLUDE_ -#define _IBM_LANA_INCLUDE_ - -#ifdef _IBM_LANA_DRIVER_ - -/* maximum packet size */ - -#define PKTSIZE 1524 - -/* number of transmit buffers */ - -#define TXBUFCNT 4 - -/* Adapter ID's */ -#define IBM_LANA_ID 0xffe0 - -/* media enumeration - defined in a way that it fits onto the LAN/A's - POS registers... */ - -typedef enum { - Media_10BaseT, Media_10Base5, - Media_Unknown, Media_10Base2, Media_Count -} ibmlana_medium; - -/* private structure */ - -typedef struct { - unsigned int slot; /* MCA-Slot-# */ - int realirq; /* memorizes actual IRQ, even when - currently not allocated */ - ibmlana_medium medium; /* physical cannector */ - u32 tdastart, txbufstart, /* addresses */ - rrastart, rxbufstart, rdastart, rxbufcnt, txusedcnt; - int nextrxdescr, /* next rx descriptor to be used */ - lastrxdescr, /* last free rx descriptor */ - nexttxdescr, /* last tx descriptor to be used */ - currtxdescr, /* tx descriptor currently tx'ed */ - txused[TXBUFCNT]; /* busy flags */ - void __iomem *base; - spinlock_t lock; -} ibmlana_priv; - -/* this card uses quite a lot of I/O ports...luckily the MCA bus decodes - a full 64K I/O range... */ - -#define IBM_LANA_IORANGE 0xa0 - -/* Command Register: */ - -#define SONIC_CMDREG 0x00 -#define CMDREG_HTX 0x0001 /* halt transmission */ -#define CMDREG_TXP 0x0002 /* start transmission */ -#define CMDREG_RXDIS 0x0004 /* disable receiver */ -#define CMDREG_RXEN 0x0008 /* enable receiver */ -#define CMDREG_STP 0x0010 /* stop timer */ -#define CMDREG_ST 0x0020 /* start timer */ -#define CMDREG_RST 0x0080 /* software reset */ -#define CMDREG_RRRA 0x0100 /* force SONIC to read first RRA */ -#define CMDREG_LCAM 0x0200 /* force SONIC to read CAM descrs */ - -/* Data Configuration Register */ - -#define SONIC_DCREG 0x02 -#define DCREG_EXBUS 0x8000 /* Extended Bus Mode */ -#define DCREG_LBR 0x2000 /* Latched Bus Retry */ -#define DCREG_PO1 0x1000 /* Programmable Outputs */ -#define DCREG_PO0 0x0800 -#define DCREG_SBUS 0x0400 /* Synchronous Bus Mode */ -#define DCREG_USR1 0x0200 /* User Definable Pins */ -#define DCREG_USR0 0x0100 -#define DCREG_WC0 0x0000 /* 0..3 Wait States */ -#define DCREG_WC1 0x0040 -#define DCREG_WC2 0x0080 -#define DCREG_WC3 0x00c0 -#define DCREG_DW16 0x0000 /* 16 bit Bus Mode */ -#define DCREG_DW32 0x0020 /* 32 bit Bus Mode */ -#define DCREG_BMS 0x0010 /* Block Mode Select */ -#define DCREG_RFT4 0x0000 /* 4/8/16/24 bytes RX Threshold */ -#define DCREG_RFT8 0x0004 -#define DCREG_RFT16 0x0008 -#define DCREG_RFT24 0x000c -#define DCREG_TFT8 0x0000 /* 8/16/24/28 bytes TX Threshold */ -#define DCREG_TFT16 0x0001 -#define DCREG_TFT24 0x0002 -#define DCREG_TFT28 0x0003 - -/* Receive Control Register */ - -#define SONIC_RCREG 0x04 -#define RCREG_ERR 0x8000 /* accept damaged and collided pkts */ -#define RCREG_RNT 0x4000 /* accept packets that are < 64 */ -#define RCREG_BRD 0x2000 /* accept broadcasts */ -#define RCREG_PRO 0x1000 /* promiscuous mode */ -#define RCREG_AMC 0x0800 /* accept all multicasts */ -#define RCREG_LB_NONE 0x0000 /* no loopback */ -#define RCREG_LB_MAC 0x0200 /* MAC loopback */ -#define RCREG_LB_ENDEC 0x0400 /* ENDEC loopback */ -#define RCREG_LB_XVR 0x0600 /* Transceiver loopback */ -#define RCREG_MC 0x0100 /* Multicast received */ -#define RCREG_BC 0x0080 /* Broadcast received */ -#define RCREG_LPKT 0x0040 /* last packet in RBA */ -#define RCREG_CRS 0x0020 /* carrier sense present */ -#define RCREG_COL 0x0010 /* recv'd packet with collision */ -#define RCREG_CRCR 0x0008 /* recv'd packet with CRC error */ -#define RCREG_FAER 0x0004 /* recv'd packet with inv. framing */ -#define RCREG_LBK 0x0002 /* recv'd loopback packet */ -#define RCREG_PRX 0x0001 /* recv'd packet is OK */ - -/* Transmit Control Register */ - -#define SONIC_TCREG 0x06 -#define TCREG_PINT 0x8000 /* generate interrupt after TDA read */ -#define TCREG_POWC 0x4000 /* timer start out of window detect */ -#define TCREG_CRCI 0x2000 /* inhibit CRC generation */ -#define TCREG_EXDIS 0x1000 /* disable excessive deferral timer */ -#define TCREG_EXD 0x0400 /* excessive deferral occurred */ -#define TCREG_DEF 0x0200 /* single deferral occurred */ -#define TCREG_NCRS 0x0100 /* no carrier detected */ -#define TCREG_CRSL 0x0080 /* carrier lost */ -#define TCREG_EXC 0x0040 /* excessive collisions occurred */ -#define TCREG_OWC 0x0020 /* out of window collision occurred */ -#define TCREG_PMB 0x0008 /* packet monitored bad */ -#define TCREG_FU 0x0004 /* FIFO underrun */ -#define TCREG_BCM 0x0002 /* byte count mismatch of fragments */ -#define TCREG_PTX 0x0001 /* packet transmitted OK */ - -/* Interrupt Mask Register */ - -#define SONIC_IMREG 0x08 -#define IMREG_BREN 0x4000 /* interrupt when bus retry occurred */ -#define IMREG_HBLEN 0x2000 /* interrupt when heartbeat lost */ -#define IMREG_LCDEN 0x1000 /* interrupt when CAM loaded */ -#define IMREG_PINTEN 0x0800 /* interrupt when PINT in TDA set */ -#define IMREG_PRXEN 0x0400 /* interrupt when packet received */ -#define IMREG_PTXEN 0x0200 /* interrupt when packet was sent */ -#define IMREG_TXEREN 0x0100 /* interrupt when send failed */ -#define IMREG_TCEN 0x0080 /* interrupt when timer completed */ -#define IMREG_RDEEN 0x0040 /* interrupt when RDA exhausted */ -#define IMREG_RBEEN 0x0020 /* interrupt when RBA exhausted */ -#define IMREG_RBAEEN 0x0010 /* interrupt when RBA too short */ -#define IMREG_CRCEN 0x0008 /* interrupt when CRC counter rolls */ -#define IMREG_FAEEN 0x0004 /* interrupt when FAE counter rolls */ -#define IMREG_MPEN 0x0002 /* interrupt when MP counter rolls */ -#define IMREG_RFOEN 0x0001 /* interrupt when Rx FIFO overflows */ - -/* Interrupt Status Register */ - -#define SONIC_ISREG 0x0a -#define ISREG_BR 0x4000 /* bus retry occurred */ -#define ISREG_HBL 0x2000 /* heartbeat lost */ -#define ISREG_LCD 0x1000 /* CAM loaded */ -#define ISREG_PINT 0x0800 /* PINT in TDA set */ -#define ISREG_PKTRX 0x0400 /* packet received */ -#define ISREG_TXDN 0x0200 /* packet was sent */ -#define ISREG_TXER 0x0100 /* send failed */ -#define ISREG_TC 0x0080 /* timer completed */ -#define ISREG_RDE 0x0040 /* RDA exhausted */ -#define ISREG_RBE 0x0020 /* RBA exhausted */ -#define ISREG_RBAE 0x0010 /* RBA too short for received frame */ -#define ISREG_CRC 0x0008 /* CRC counter rolls over */ -#define ISREG_FAE 0x0004 /* FAE counter rolls over */ -#define ISREG_MP 0x0002 /* MP counter rolls over */ -#define ISREG_RFO 0x0001 /* Rx FIFO overflows */ - -#define SONIC_UTDA 0x0c /* current transmit descr address */ -#define SONIC_CTDA 0x0e - -#define SONIC_URDA 0x1a /* current receive descr address */ -#define SONIC_CRDA 0x1c - -#define SONIC_CRBA0 0x1e /* current receive buffer address */ -#define SONIC_CRBA1 0x20 - -#define SONIC_RBWC0 0x22 /* word count in receive buffer */ -#define SONIC_RBWC1 0x24 - -#define SONIC_EOBC 0x26 /* minimum space to be free in RBA */ - -#define SONIC_URRA 0x28 /* upper address of CDA & Recv Area */ - -#define SONIC_RSA 0x2a /* start of receive resource area */ - -#define SONIC_REA 0x2c /* end of receive resource area */ - -#define SONIC_RRP 0x2e /* resource read pointer */ - -#define SONIC_RWP 0x30 /* resource write pointer */ - -#define SONIC_CAMEPTR 0x42 /* CAM entry pointer */ - -#define SONIC_CAMADDR2 0x44 /* CAM address ports */ -#define SONIC_CAMADDR1 0x46 -#define SONIC_CAMADDR0 0x48 - -#define SONIC_CAMPTR 0x4c /* lower address of CDA */ - -#define SONIC_CAMCNT 0x4e /* # of CAM descriptors to load */ - -/* Data Configuration Register 2 */ - -#define SONIC_DCREG2 0x7e -#define DCREG2_EXPO3 0x8000 /* extended programmable outputs */ -#define DCREG2_EXPO2 0x4000 -#define DCREG2_EXPO1 0x2000 -#define DCREG2_EXPO0 0x1000 -#define DCREG2_HD 0x0800 /* heartbeat disable */ -#define DCREG2_JD 0x0200 /* jabber timer disable */ -#define DCREG2_AUTO 0x0100 /* enable AUI/TP auto selection */ -#define DCREG2_XWRAP 0x0040 /* TP transceiver loopback */ -#define DCREG2_PH 0x0010 /* HOLD request timing */ -#define DCREG2_PCM 0x0004 /* packet compress when matched */ -#define DCREG2_PCNM 0x0002 /* packet compress when not matched */ -#define DCREG2_RJCM 0x0001 /* inverse packet match via CAM */ - -/* Board Control Register: Enable RAM, Interrupts... */ - -#define BCMREG 0x80 -#define BCMREG_RAMEN 0x80 /* switch over to RAM */ -#define BCMREG_IPEND 0x40 /* interrupt pending ? */ -#define BCMREG_RESET 0x08 /* reset board */ -#define BCMREG_16BIT 0x04 /* adapter in 16-bit slot */ -#define BCMREG_RAMWIN 0x02 /* enable RAM window */ -#define BCMREG_IEN 0x01 /* interrupt enable */ - -/* MAC Address PROM */ - -#define MACADDRPROM 0x92 - -/* structure of a CAM entry */ - -typedef struct { - u32 index; /* pointer into CAM area */ - u32 addr0; /* address part (bits 0..15 used) */ - u32 addr1; - u32 addr2; -} camentry_t; - -/* structure of a receive resource */ - -typedef struct { - u32 startlo; /* start address (bits 0..15 used) */ - u32 starthi; - u32 cntlo; /* size in 16-bit quantities */ - u32 cnthi; -} rra_t; - -/* structure of a receive descriptor */ - -typedef struct { - u32 status; /* packet status */ - u32 length; /* length in bytes */ - u32 startlo; /* start address */ - u32 starthi; - u32 seqno; /* frame sequence */ - u32 link; /* pointer to next descriptor */ - /* bit 0 = EOL */ - u32 inuse; /* !=0 --> free for SONIC to write */ -} rda_t; - -/* structure of a transmit descriptor */ - -typedef struct { - u32 status; /* transmit status */ - u32 config; /* value for TCR */ - u32 length; /* total length */ - u32 fragcount; /* number of fragments */ - u32 startlo; /* start address of fragment */ - u32 starthi; - u32 fraglength; /* length of this fragment */ - /* more address/length triplets may */ - /* follow here */ - u32 link; /* pointer to next descriptor */ - /* bit 0 = EOL */ -} tda_t; - -#endif /* _IBM_LANA_DRIVER_ */ - -#endif /* _IBM_LANA_INCLUDE_ */ diff --git a/drivers/net/jazzsonic.c b/drivers/net/jazzsonic.c deleted file mode 100644 index 949c1f933644..000000000000 --- a/drivers/net/jazzsonic.c +++ /dev/null @@ -1,308 +0,0 @@ -/* - * jazzsonic.c - * - * (C) 2005 Finn Thain - * - * Converted to DMA API, and (from the mac68k project) introduced - * dhd's support for 16-bit cards. - * - * (C) 1996,1998 by Thomas Bogendoerfer (tsbogend@alpha.franken.de) - * - * This driver is based on work from Andreas Busse, but most of - * the code is rewritten. - * - * (C) 1995 by Andreas Busse (andy@waldorf-gmbh.de) - * - * A driver for the onboard Sonic ethernet controller on Mips Jazz - * systems (Acer Pica-61, Mips Magnum 4000, Olivetti M700 and - * perhaps others, too) - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -static char jazz_sonic_string[] = "jazzsonic"; - -#define SONIC_MEM_SIZE 0x100 - -#include "sonic.h" - -/* - * Macros to access SONIC registers - */ -#define SONIC_READ(reg) (*((volatile unsigned int *)dev->base_addr+reg)) - -#define SONIC_WRITE(reg,val) \ -do { \ - *((volatile unsigned int *)dev->base_addr+(reg)) = (val); \ -} while (0) - - -/* use 0 for production, 1 for verification, >1 for debug */ -#ifdef SONIC_DEBUG -static unsigned int sonic_debug = SONIC_DEBUG; -#else -static unsigned int sonic_debug = 1; -#endif - -/* - * We cannot use station (ethernet) address prefixes to detect the - * sonic controller since these are board manufacturer depended. - * So we check for known Silicon Revision IDs instead. - */ -static unsigned short known_revisions[] = -{ - 0x04, /* Mips Magnum 4000 */ - 0xffff /* end of list */ -}; - -static int jazzsonic_open(struct net_device* dev) -{ - int retval; - - retval = request_irq(dev->irq, sonic_interrupt, IRQF_DISABLED, - "sonic", dev); - if (retval) { - printk(KERN_ERR "%s: unable to get IRQ %d.\n", - dev->name, dev->irq); - return retval; - } - - retval = sonic_open(dev); - if (retval) - free_irq(dev->irq, dev); - return retval; -} - -static int jazzsonic_close(struct net_device* dev) -{ - int err; - err = sonic_close(dev); - free_irq(dev->irq, dev); - return err; -} - -static const struct net_device_ops sonic_netdev_ops = { - .ndo_open = jazzsonic_open, - .ndo_stop = jazzsonic_close, - .ndo_start_xmit = sonic_send_packet, - .ndo_get_stats = sonic_get_stats, - .ndo_set_multicast_list = sonic_multicast_list, - .ndo_tx_timeout = sonic_tx_timeout, - .ndo_change_mtu = eth_change_mtu, - .ndo_validate_addr = eth_validate_addr, - .ndo_set_mac_address = eth_mac_addr, -}; - -static int __devinit sonic_probe1(struct net_device *dev) -{ - static unsigned version_printed; - unsigned int silicon_revision; - unsigned int val; - struct sonic_local *lp = netdev_priv(dev); - int err = -ENODEV; - int i; - - if (!request_mem_region(dev->base_addr, SONIC_MEM_SIZE, jazz_sonic_string)) - return -EBUSY; - - /* - * get the Silicon Revision ID. If this is one of the known - * one assume that we found a SONIC ethernet controller at - * the expected location. - */ - silicon_revision = SONIC_READ(SONIC_SR); - if (sonic_debug > 1) - printk("SONIC Silicon Revision = 0x%04x\n",silicon_revision); - - i = 0; - while (known_revisions[i] != 0xffff && - known_revisions[i] != silicon_revision) - i++; - - if (known_revisions[i] == 0xffff) { - printk("SONIC ethernet controller not found (0x%4x)\n", - silicon_revision); - goto out; - } - - if (sonic_debug && version_printed++ == 0) - printk(version); - - printk(KERN_INFO "%s: Sonic ethernet found at 0x%08lx, ", - dev_name(lp->device), dev->base_addr); - - /* - * Put the sonic into software reset, then - * retrieve and print the ethernet address. - */ - SONIC_WRITE(SONIC_CMD,SONIC_CR_RST); - SONIC_WRITE(SONIC_CEP,0); - for (i=0; i<3; i++) { - val = SONIC_READ(SONIC_CAP0-i); - dev->dev_addr[i*2] = val; - dev->dev_addr[i*2+1] = val >> 8; - } - - err = -ENOMEM; - - /* Initialize the device structure. */ - - lp->dma_bitmode = SONIC_BITMODE32; - - /* Allocate the entire chunk of memory for the descriptors. - Note that this cannot cross a 64K boundary. */ - if ((lp->descriptors = dma_alloc_coherent(lp->device, - SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode), - &lp->descriptors_laddr, GFP_KERNEL)) == NULL) { - printk(KERN_ERR "%s: couldn't alloc DMA memory for descriptors.\n", - dev_name(lp->device)); - goto out; - } - - /* Now set up the pointers to point to the appropriate places */ - lp->cda = lp->descriptors; - lp->tda = lp->cda + (SIZEOF_SONIC_CDA - * SONIC_BUS_SCALE(lp->dma_bitmode)); - lp->rda = lp->tda + (SIZEOF_SONIC_TD * SONIC_NUM_TDS - * SONIC_BUS_SCALE(lp->dma_bitmode)); - lp->rra = lp->rda + (SIZEOF_SONIC_RD * SONIC_NUM_RDS - * SONIC_BUS_SCALE(lp->dma_bitmode)); - - lp->cda_laddr = lp->descriptors_laddr; - lp->tda_laddr = lp->cda_laddr + (SIZEOF_SONIC_CDA - * SONIC_BUS_SCALE(lp->dma_bitmode)); - lp->rda_laddr = lp->tda_laddr + (SIZEOF_SONIC_TD * SONIC_NUM_TDS - * SONIC_BUS_SCALE(lp->dma_bitmode)); - lp->rra_laddr = lp->rda_laddr + (SIZEOF_SONIC_RD * SONIC_NUM_RDS - * SONIC_BUS_SCALE(lp->dma_bitmode)); - - dev->netdev_ops = &sonic_netdev_ops; - dev->watchdog_timeo = TX_TIMEOUT; - - /* - * clear tally counter - */ - SONIC_WRITE(SONIC_CRCT,0xffff); - SONIC_WRITE(SONIC_FAET,0xffff); - SONIC_WRITE(SONIC_MPT,0xffff); - - return 0; -out: - release_mem_region(dev->base_addr, SONIC_MEM_SIZE); - return err; -} - -/* - * Probe for a SONIC ethernet controller on a Mips Jazz board. - * Actually probing is superfluous but we're paranoid. - */ -static int __devinit jazz_sonic_probe(struct platform_device *pdev) -{ - struct net_device *dev; - struct sonic_local *lp; - struct resource *res; - int err = 0; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) - return -ENODEV; - - dev = alloc_etherdev(sizeof(struct sonic_local)); - if (!dev) - return -ENOMEM; - - lp = netdev_priv(dev); - lp->device = &pdev->dev; - SET_NETDEV_DEV(dev, &pdev->dev); - platform_set_drvdata(pdev, dev); - - netdev_boot_setup_check(dev); - - dev->base_addr = res->start; - dev->irq = platform_get_irq(pdev, 0); - err = sonic_probe1(dev); - if (err) - goto out; - err = register_netdev(dev); - if (err) - goto out1; - - printk("%s: MAC %pM IRQ %d\n", dev->name, dev->dev_addr, dev->irq); - - return 0; - -out1: - release_mem_region(dev->base_addr, SONIC_MEM_SIZE); -out: - free_netdev(dev); - - return err; -} - -MODULE_DESCRIPTION("Jazz SONIC ethernet driver"); -module_param(sonic_debug, int, 0); -MODULE_PARM_DESC(sonic_debug, "jazzsonic debug level (1-4)"); -MODULE_ALIAS("platform:jazzsonic"); - -#include "sonic.c" - -static int __devexit jazz_sonic_device_remove (struct platform_device *pdev) -{ - struct net_device *dev = platform_get_drvdata(pdev); - struct sonic_local* lp = netdev_priv(dev); - - unregister_netdev(dev); - dma_free_coherent(lp->device, SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode), - lp->descriptors, lp->descriptors_laddr); - release_mem_region(dev->base_addr, SONIC_MEM_SIZE); - free_netdev(dev); - - return 0; -} - -static struct platform_driver jazz_sonic_driver = { - .probe = jazz_sonic_probe, - .remove = __devexit_p(jazz_sonic_device_remove), - .driver = { - .name = jazz_sonic_string, - .owner = THIS_MODULE, - }, -}; - -static int __init jazz_sonic_init_module(void) -{ - return platform_driver_register(&jazz_sonic_driver); -} - -static void __exit jazz_sonic_cleanup_module(void) -{ - platform_driver_unregister(&jazz_sonic_driver); -} - -module_init(jazz_sonic_init_module); -module_exit(jazz_sonic_cleanup_module); diff --git a/drivers/net/macsonic.c b/drivers/net/macsonic.c deleted file mode 100644 index c93679ee6994..000000000000 --- a/drivers/net/macsonic.c +++ /dev/null @@ -1,666 +0,0 @@ -/* - * macsonic.c - * - * (C) 2005 Finn Thain - * - * Converted to DMA API, converted to unified driver model, made it work as - * a module again, and from the mac68k project, introduced more 32-bit cards - * and dhd's support for 16-bit cards. - * - * (C) 1998 Alan Cox - * - * Debugging Andreas Ehliar, Michael Schmitz - * - * Based on code - * (C) 1996 by Thomas Bogendoerfer (tsbogend@bigbug.franken.de) - * - * This driver is based on work from Andreas Busse, but most of - * the code is rewritten. - * - * (C) 1995 by Andreas Busse (andy@waldorf-gmbh.de) - * - * A driver for the Mac onboard Sonic ethernet chip. - * - * 98/12/21 MSch: judged from tests on Q800, it's basically working, - * but eating up both receive and transmit resources - * and duplicating packets. Needs more testing. - * - * 99/01/03 MSch: upgraded to version 0.92 of the core driver, fixed. - * - * 00/10/31 sammy@oh.verio.com: Updated driver for 2.4 kernels, fixed problems - * on centris. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static char mac_sonic_string[] = "macsonic"; - -#include "sonic.h" - -/* These should basically be bus-size and endian independent (since - the SONIC is at least smart enough that it uses the same endianness - as the host, unlike certain less enlightened Macintosh NICs) */ -#define SONIC_READ(reg) (nubus_readw(dev->base_addr + (reg * 4) \ - + lp->reg_offset)) -#define SONIC_WRITE(reg,val) (nubus_writew(val, dev->base_addr + (reg * 4) \ - + lp->reg_offset)) - -/* use 0 for production, 1 for verification, >1 for debug */ -#ifdef SONIC_DEBUG -static unsigned int sonic_debug = SONIC_DEBUG; -#else -static unsigned int sonic_debug = 1; -#endif - -static int sonic_version_printed; - -/* For onboard SONIC */ -#define ONBOARD_SONIC_REGISTERS 0x50F0A000 -#define ONBOARD_SONIC_PROM_BASE 0x50f08000 - -enum macsonic_type { - MACSONIC_DUODOCK, - MACSONIC_APPLE, - MACSONIC_APPLE16, - MACSONIC_DAYNA, - MACSONIC_DAYNALINK -}; - -/* For the built-in SONIC in the Duo Dock */ -#define DUODOCK_SONIC_REGISTERS 0xe10000 -#define DUODOCK_SONIC_PROM_BASE 0xe12000 - -/* For Apple-style NuBus SONIC */ -#define APPLE_SONIC_REGISTERS 0 -#define APPLE_SONIC_PROM_BASE 0x40000 - -/* Daynalink LC SONIC */ -#define DAYNALINK_PROM_BASE 0x400000 - -/* For Dayna-style NuBus SONIC (haven't seen one yet) */ -#define DAYNA_SONIC_REGISTERS 0x180000 -/* This is what OpenBSD says. However, this is definitely in NuBus - ROM space so we should be able to get it by walking the NuBus - resource directories */ -#define DAYNA_SONIC_MAC_ADDR 0xffe004 - -#define SONIC_READ_PROM(addr) nubus_readb(prom_addr+addr) - -/* - * For reversing the PROM address - */ - -static inline void bit_reverse_addr(unsigned char addr[6]) -{ - int i; - - for(i = 0; i < 6; i++) - addr[i] = bitrev8(addr[i]); -} - -static irqreturn_t macsonic_interrupt(int irq, void *dev_id) -{ - irqreturn_t result; - unsigned long flags; - - local_irq_save(flags); - result = sonic_interrupt(irq, dev_id); - local_irq_restore(flags); - return result; -} - -static int macsonic_open(struct net_device* dev) -{ - int retval; - - retval = request_irq(dev->irq, sonic_interrupt, IRQ_FLG_FAST, - "sonic", dev); - if (retval) { - printk(KERN_ERR "%s: unable to get IRQ %d.\n", - dev->name, dev->irq); - goto err; - } - /* Under the A/UX interrupt scheme, the onboard SONIC interrupt comes - * in at priority level 3. However, we sometimes get the level 2 inter- - * rupt as well, which must prevent re-entrance of the sonic handler. - */ - if (dev->irq == IRQ_AUTO_3) { - retval = request_irq(IRQ_NUBUS_9, macsonic_interrupt, - IRQ_FLG_FAST, "sonic", dev); - if (retval) { - printk(KERN_ERR "%s: unable to get IRQ %d.\n", - dev->name, IRQ_NUBUS_9); - goto err_irq; - } - } - retval = sonic_open(dev); - if (retval) - goto err_irq_nubus; - return 0; - -err_irq_nubus: - if (dev->irq == IRQ_AUTO_3) - free_irq(IRQ_NUBUS_9, dev); -err_irq: - free_irq(dev->irq, dev); -err: - return retval; -} - -static int macsonic_close(struct net_device* dev) -{ - int err; - err = sonic_close(dev); - free_irq(dev->irq, dev); - if (dev->irq == IRQ_AUTO_3) - free_irq(IRQ_NUBUS_9, dev); - return err; -} - -static const struct net_device_ops macsonic_netdev_ops = { - .ndo_open = macsonic_open, - .ndo_stop = macsonic_close, - .ndo_start_xmit = sonic_send_packet, - .ndo_set_multicast_list = sonic_multicast_list, - .ndo_tx_timeout = sonic_tx_timeout, - .ndo_get_stats = sonic_get_stats, - .ndo_validate_addr = eth_validate_addr, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, -}; - -static int __devinit macsonic_init(struct net_device *dev) -{ - struct sonic_local* lp = netdev_priv(dev); - - /* Allocate the entire chunk of memory for the descriptors. - Note that this cannot cross a 64K boundary. */ - if ((lp->descriptors = dma_alloc_coherent(lp->device, - SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode), - &lp->descriptors_laddr, GFP_KERNEL)) == NULL) { - printk(KERN_ERR "%s: couldn't alloc DMA memory for descriptors.\n", - dev_name(lp->device)); - return -ENOMEM; - } - - /* Now set up the pointers to point to the appropriate places */ - lp->cda = lp->descriptors; - lp->tda = lp->cda + (SIZEOF_SONIC_CDA - * SONIC_BUS_SCALE(lp->dma_bitmode)); - lp->rda = lp->tda + (SIZEOF_SONIC_TD * SONIC_NUM_TDS - * SONIC_BUS_SCALE(lp->dma_bitmode)); - lp->rra = lp->rda + (SIZEOF_SONIC_RD * SONIC_NUM_RDS - * SONIC_BUS_SCALE(lp->dma_bitmode)); - - lp->cda_laddr = lp->descriptors_laddr; - lp->tda_laddr = lp->cda_laddr + (SIZEOF_SONIC_CDA - * SONIC_BUS_SCALE(lp->dma_bitmode)); - lp->rda_laddr = lp->tda_laddr + (SIZEOF_SONIC_TD * SONIC_NUM_TDS - * SONIC_BUS_SCALE(lp->dma_bitmode)); - lp->rra_laddr = lp->rda_laddr + (SIZEOF_SONIC_RD * SONIC_NUM_RDS - * SONIC_BUS_SCALE(lp->dma_bitmode)); - - dev->netdev_ops = &macsonic_netdev_ops; - dev->watchdog_timeo = TX_TIMEOUT; - - /* - * clear tally counter - */ - SONIC_WRITE(SONIC_CRCT, 0xffff); - SONIC_WRITE(SONIC_FAET, 0xffff); - SONIC_WRITE(SONIC_MPT, 0xffff); - - return 0; -} - -#define INVALID_MAC(mac) (memcmp(mac, "\x08\x00\x07", 3) && \ - memcmp(mac, "\x00\xA0\x40", 3) && \ - memcmp(mac, "\x00\x80\x19", 3) && \ - memcmp(mac, "\x00\x05\x02", 3)) - -static void __devinit mac_onboard_sonic_ethernet_addr(struct net_device *dev) -{ - struct sonic_local *lp = netdev_priv(dev); - const int prom_addr = ONBOARD_SONIC_PROM_BASE; - unsigned short val; - - /* - * On NuBus boards we can sometimes look in the ROM resources. - * No such luck for comm-slot/onboard. - * On the PowerBook 520, the PROM base address is a mystery. - */ - if (hwreg_present((void *)prom_addr)) { - int i; - - for (i = 0; i < 6; i++) - dev->dev_addr[i] = SONIC_READ_PROM(i); - if (!INVALID_MAC(dev->dev_addr)) - return; - - /* - * Most of the time, the address is bit-reversed. The NetBSD - * source has a rather long and detailed historical account of - * why this is so. - */ - bit_reverse_addr(dev->dev_addr); - if (!INVALID_MAC(dev->dev_addr)) - return; - - /* - * If we still have what seems to be a bogus address, we'll - * look in the CAM. The top entry should be ours. - */ - printk(KERN_WARNING "macsonic: MAC address in PROM seems " - "to be invalid, trying CAM\n"); - } else { - printk(KERN_WARNING "macsonic: cannot read MAC address from " - "PROM, trying CAM\n"); - } - - /* This only works if MacOS has already initialized the card. */ - - SONIC_WRITE(SONIC_CMD, SONIC_CR_RST); - SONIC_WRITE(SONIC_CEP, 15); - - val = SONIC_READ(SONIC_CAP2); - dev->dev_addr[5] = val >> 8; - dev->dev_addr[4] = val & 0xff; - val = SONIC_READ(SONIC_CAP1); - dev->dev_addr[3] = val >> 8; - dev->dev_addr[2] = val & 0xff; - val = SONIC_READ(SONIC_CAP0); - dev->dev_addr[1] = val >> 8; - dev->dev_addr[0] = val & 0xff; - - if (!INVALID_MAC(dev->dev_addr)) - return; - - /* Still nonsense ... messed up someplace! */ - - printk(KERN_WARNING "macsonic: MAC address in CAM entry 15 " - "seems invalid, will use a random MAC\n"); - random_ether_addr(dev->dev_addr); -} - -static int __devinit mac_onboard_sonic_probe(struct net_device *dev) -{ - /* Bwahahaha */ - static int once_is_more_than_enough; - struct sonic_local* lp = netdev_priv(dev); - int sr; - int commslot = 0; - - if (once_is_more_than_enough) - return -ENODEV; - once_is_more_than_enough = 1; - - if (!MACH_IS_MAC) - return -ENODEV; - - if (macintosh_config->ether_type != MAC_ETHER_SONIC) - return -ENODEV; - - printk(KERN_INFO "Checking for internal Macintosh ethernet (SONIC).. "); - - /* Bogus probing, on the models which may or may not have - Ethernet (BTW, the Ethernet *is* always at the same - address, and nothing else lives there, at least if Apple's - documentation is to be believed) */ - if (macintosh_config->ident == MAC_MODEL_Q630 || - macintosh_config->ident == MAC_MODEL_P588 || - macintosh_config->ident == MAC_MODEL_P575 || - macintosh_config->ident == MAC_MODEL_C610) { - unsigned long flags; - int card_present; - - local_irq_save(flags); - card_present = hwreg_present((void*)ONBOARD_SONIC_REGISTERS); - local_irq_restore(flags); - - if (!card_present) { - printk("none.\n"); - return -ENODEV; - } - commslot = 1; - } - - printk("yes\n"); - - /* Danger! My arms are flailing wildly! You *must* set lp->reg_offset - * and dev->base_addr before using SONIC_READ() or SONIC_WRITE() */ - dev->base_addr = ONBOARD_SONIC_REGISTERS; - if (via_alt_mapping) - dev->irq = IRQ_AUTO_3; - else - dev->irq = IRQ_NUBUS_9; - - if (!sonic_version_printed) { - printk(KERN_INFO "%s", version); - sonic_version_printed = 1; - } - printk(KERN_INFO "%s: onboard / comm-slot SONIC at 0x%08lx\n", - dev_name(lp->device), dev->base_addr); - - /* The PowerBook's SONIC is 16 bit always. */ - if (macintosh_config->ident == MAC_MODEL_PB520) { - lp->reg_offset = 0; - lp->dma_bitmode = SONIC_BITMODE16; - sr = SONIC_READ(SONIC_SR); - } else if (commslot) { - /* Some of the comm-slot cards are 16 bit. But some - of them are not. The 32-bit cards use offset 2 and - have known revisions, we try reading the revision - register at offset 2, if we don't get a known revision - we assume 16 bit at offset 0. */ - lp->reg_offset = 2; - lp->dma_bitmode = SONIC_BITMODE16; - - sr = SONIC_READ(SONIC_SR); - if (sr == 0x0004 || sr == 0x0006 || sr == 0x0100 || sr == 0x0101) - /* 83932 is 0x0004 or 0x0006, 83934 is 0x0100 or 0x0101 */ - lp->dma_bitmode = SONIC_BITMODE32; - else { - lp->dma_bitmode = SONIC_BITMODE16; - lp->reg_offset = 0; - sr = SONIC_READ(SONIC_SR); - } - } else { - /* All onboard cards are at offset 2 with 32 bit DMA. */ - lp->reg_offset = 2; - lp->dma_bitmode = SONIC_BITMODE32; - sr = SONIC_READ(SONIC_SR); - } - printk(KERN_INFO - "%s: revision 0x%04x, using %d bit DMA and register offset %d\n", - dev_name(lp->device), sr, lp->dma_bitmode?32:16, lp->reg_offset); - -#if 0 /* This is sometimes useful to find out how MacOS configured the card. */ - printk(KERN_INFO "%s: DCR: 0x%04x, DCR2: 0x%04x\n", dev_name(lp->device), - SONIC_READ(SONIC_DCR) & 0xffff, SONIC_READ(SONIC_DCR2) & 0xffff); -#endif - - /* Software reset, then initialize control registers. */ - SONIC_WRITE(SONIC_CMD, SONIC_CR_RST); - - SONIC_WRITE(SONIC_DCR, SONIC_DCR_EXBUS | SONIC_DCR_BMS | - SONIC_DCR_RFT1 | SONIC_DCR_TFT0 | - (lp->dma_bitmode ? SONIC_DCR_DW : 0)); - - /* This *must* be written back to in order to restore the - * extended programmable output bits, as it may not have been - * initialised since the hardware reset. */ - SONIC_WRITE(SONIC_DCR2, 0); - - /* Clear *and* disable interrupts to be on the safe side */ - SONIC_WRITE(SONIC_IMR, 0); - SONIC_WRITE(SONIC_ISR, 0x7fff); - - /* Now look for the MAC address. */ - mac_onboard_sonic_ethernet_addr(dev); - - /* Shared init code */ - return macsonic_init(dev); -} - -static int __devinit mac_nubus_sonic_ethernet_addr(struct net_device *dev, - unsigned long prom_addr, - int id) -{ - int i; - for(i = 0; i < 6; i++) - dev->dev_addr[i] = SONIC_READ_PROM(i); - - /* Some of the addresses are bit-reversed */ - if (id != MACSONIC_DAYNA) - bit_reverse_addr(dev->dev_addr); - - return 0; -} - -static int __devinit macsonic_ident(struct nubus_dev *ndev) -{ - if (ndev->dr_hw == NUBUS_DRHW_ASANTE_LC && - ndev->dr_sw == NUBUS_DRSW_SONIC_LC) - return MACSONIC_DAYNALINK; - if (ndev->dr_hw == NUBUS_DRHW_SONIC && - ndev->dr_sw == NUBUS_DRSW_APPLE) { - /* There has to be a better way to do this... */ - if (strstr(ndev->board->name, "DuoDock")) - return MACSONIC_DUODOCK; - else - return MACSONIC_APPLE; - } - - if (ndev->dr_hw == NUBUS_DRHW_SMC9194 && - ndev->dr_sw == NUBUS_DRSW_DAYNA) - return MACSONIC_DAYNA; - - if (ndev->dr_hw == NUBUS_DRHW_APPLE_SONIC_LC && - ndev->dr_sw == 0) { /* huh? */ - return MACSONIC_APPLE16; - } - return -1; -} - -static int __devinit mac_nubus_sonic_probe(struct net_device *dev) -{ - static int slots; - struct nubus_dev* ndev = NULL; - struct sonic_local* lp = netdev_priv(dev); - unsigned long base_addr, prom_addr; - u16 sonic_dcr; - int id = -1; - int reg_offset, dma_bitmode; - - /* Find the first SONIC that hasn't been initialized already */ - while ((ndev = nubus_find_type(NUBUS_CAT_NETWORK, - NUBUS_TYPE_ETHERNET, ndev)) != NULL) - { - /* Have we seen it already? */ - if (slots & (1<board->slot)) - continue; - slots |= 1<board->slot; - - /* Is it one of ours? */ - if ((id = macsonic_ident(ndev)) != -1) - break; - } - - if (ndev == NULL) - return -ENODEV; - - switch (id) { - case MACSONIC_DUODOCK: - base_addr = ndev->board->slot_addr + DUODOCK_SONIC_REGISTERS; - prom_addr = ndev->board->slot_addr + DUODOCK_SONIC_PROM_BASE; - sonic_dcr = SONIC_DCR_EXBUS | SONIC_DCR_RFT0 | SONIC_DCR_RFT1 | - SONIC_DCR_TFT0; - reg_offset = 2; - dma_bitmode = SONIC_BITMODE32; - break; - case MACSONIC_APPLE: - base_addr = ndev->board->slot_addr + APPLE_SONIC_REGISTERS; - prom_addr = ndev->board->slot_addr + APPLE_SONIC_PROM_BASE; - sonic_dcr = SONIC_DCR_BMS | SONIC_DCR_RFT1 | SONIC_DCR_TFT0; - reg_offset = 0; - dma_bitmode = SONIC_BITMODE32; - break; - case MACSONIC_APPLE16: - base_addr = ndev->board->slot_addr + APPLE_SONIC_REGISTERS; - prom_addr = ndev->board->slot_addr + APPLE_SONIC_PROM_BASE; - sonic_dcr = SONIC_DCR_EXBUS | SONIC_DCR_RFT1 | SONIC_DCR_TFT0 | - SONIC_DCR_PO1 | SONIC_DCR_BMS; - reg_offset = 0; - dma_bitmode = SONIC_BITMODE16; - break; - case MACSONIC_DAYNALINK: - base_addr = ndev->board->slot_addr + APPLE_SONIC_REGISTERS; - prom_addr = ndev->board->slot_addr + DAYNALINK_PROM_BASE; - sonic_dcr = SONIC_DCR_RFT1 | SONIC_DCR_TFT0 | - SONIC_DCR_PO1 | SONIC_DCR_BMS; - reg_offset = 0; - dma_bitmode = SONIC_BITMODE16; - break; - case MACSONIC_DAYNA: - base_addr = ndev->board->slot_addr + DAYNA_SONIC_REGISTERS; - prom_addr = ndev->board->slot_addr + DAYNA_SONIC_MAC_ADDR; - sonic_dcr = SONIC_DCR_BMS | - SONIC_DCR_RFT1 | SONIC_DCR_TFT0 | SONIC_DCR_PO1; - reg_offset = 0; - dma_bitmode = SONIC_BITMODE16; - break; - default: - printk(KERN_ERR "macsonic: WTF, id is %d\n", id); - return -ENODEV; - } - - /* Danger! My arms are flailing wildly! You *must* set lp->reg_offset - * and dev->base_addr before using SONIC_READ() or SONIC_WRITE() */ - dev->base_addr = base_addr; - lp->reg_offset = reg_offset; - lp->dma_bitmode = dma_bitmode; - dev->irq = SLOT2IRQ(ndev->board->slot); - - if (!sonic_version_printed) { - printk(KERN_INFO "%s", version); - sonic_version_printed = 1; - } - printk(KERN_INFO "%s: %s in slot %X\n", - dev_name(lp->device), ndev->board->name, ndev->board->slot); - printk(KERN_INFO "%s: revision 0x%04x, using %d bit DMA and register offset %d\n", - dev_name(lp->device), SONIC_READ(SONIC_SR), dma_bitmode?32:16, reg_offset); - -#if 0 /* This is sometimes useful to find out how MacOS configured the card. */ - printk(KERN_INFO "%s: DCR: 0x%04x, DCR2: 0x%04x\n", dev_name(lp->device), - SONIC_READ(SONIC_DCR) & 0xffff, SONIC_READ(SONIC_DCR2) & 0xffff); -#endif - - /* Software reset, then initialize control registers. */ - SONIC_WRITE(SONIC_CMD, SONIC_CR_RST); - SONIC_WRITE(SONIC_DCR, sonic_dcr | (dma_bitmode ? SONIC_DCR_DW : 0)); - /* This *must* be written back to in order to restore the - * extended programmable output bits, since it may not have been - * initialised since the hardware reset. */ - SONIC_WRITE(SONIC_DCR2, 0); - - /* Clear *and* disable interrupts to be on the safe side */ - SONIC_WRITE(SONIC_IMR, 0); - SONIC_WRITE(SONIC_ISR, 0x7fff); - - /* Now look for the MAC address. */ - if (mac_nubus_sonic_ethernet_addr(dev, prom_addr, id) != 0) - return -ENODEV; - - /* Shared init code */ - return macsonic_init(dev); -} - -static int __devinit mac_sonic_probe(struct platform_device *pdev) -{ - struct net_device *dev; - struct sonic_local *lp; - int err; - - dev = alloc_etherdev(sizeof(struct sonic_local)); - if (!dev) - return -ENOMEM; - - lp = netdev_priv(dev); - lp->device = &pdev->dev; - SET_NETDEV_DEV(dev, &pdev->dev); - platform_set_drvdata(pdev, dev); - - /* This will catch fatal stuff like -ENOMEM as well as success */ - err = mac_onboard_sonic_probe(dev); - if (err == 0) - goto found; - if (err != -ENODEV) - goto out; - err = mac_nubus_sonic_probe(dev); - if (err) - goto out; -found: - err = register_netdev(dev); - if (err) - goto out; - - printk("%s: MAC %pM IRQ %d\n", dev->name, dev->dev_addr, dev->irq); - - return 0; - -out: - free_netdev(dev); - - return err; -} - -MODULE_DESCRIPTION("Macintosh SONIC ethernet driver"); -module_param(sonic_debug, int, 0); -MODULE_PARM_DESC(sonic_debug, "macsonic debug level (1-4)"); -MODULE_ALIAS("platform:macsonic"); - -#include "sonic.c" - -static int __devexit mac_sonic_device_remove (struct platform_device *pdev) -{ - struct net_device *dev = platform_get_drvdata(pdev); - struct sonic_local* lp = netdev_priv(dev); - - unregister_netdev(dev); - dma_free_coherent(lp->device, SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode), - lp->descriptors, lp->descriptors_laddr); - free_netdev(dev); - - return 0; -} - -static struct platform_driver mac_sonic_driver = { - .probe = mac_sonic_probe, - .remove = __devexit_p(mac_sonic_device_remove), - .driver = { - .name = mac_sonic_string, - .owner = THIS_MODULE, - }, -}; - -static int __init mac_sonic_init_module(void) -{ - return platform_driver_register(&mac_sonic_driver); -} - -static void __exit mac_sonic_cleanup_module(void) -{ - platform_driver_unregister(&mac_sonic_driver); -} - -module_init(mac_sonic_init_module); -module_exit(mac_sonic_cleanup_module); diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c deleted file mode 100644 index 2962cc695ce3..000000000000 --- a/drivers/net/natsemi.c +++ /dev/null @@ -1,3370 +0,0 @@ -/* natsemi.c: A Linux PCI Ethernet driver for the NatSemi DP8381x series. */ -/* - Written/copyright 1999-2001 by Donald Becker. - Portions copyright (c) 2001,2002 Sun Microsystems (thockin@sun.com) - Portions copyright 2001,2002 Manfred Spraul (manfred@colorfullife.com) - Portions copyright 2004 Harald Welte - - This software may be used and distributed according to the terms of - the GNU General Public License (GPL), incorporated herein by reference. - Drivers based on or derived from this code fall under the GPL and must - retain the authorship, copyright and license notice. This file is not - a complete program and may only be used when the entire operating - system is licensed under the GPL. License for under other terms may be - available. Contact the original author for details. - - The original author may be reached as becker@scyld.com, or at - Scyld Computing Corporation - 410 Severn Ave., Suite 210 - Annapolis MD 21403 - - Support information and updates available at - http://www.scyld.com/network/netsemi.html - [link no longer provides useful info -jgarzik] - - - TODO: - * big endian support with CFG:BEM instead of cpu_to_le32 -*/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include /* Processor type for cache alignment. */ -#include -#include -#include - -#define DRV_NAME "natsemi" -#define DRV_VERSION "2.1" -#define DRV_RELDATE "Sept 11, 2006" - -#define RX_OFFSET 2 - -/* Updated to recommendations in pci-skeleton v2.03. */ - -/* The user-configurable values. - These may be modified when a driver module is loaded.*/ - -#define NATSEMI_DEF_MSG (NETIF_MSG_DRV | \ - NETIF_MSG_LINK | \ - NETIF_MSG_WOL | \ - NETIF_MSG_RX_ERR | \ - NETIF_MSG_TX_ERR) -static int debug = -1; - -static int mtu; - -/* Maximum number of multicast addresses to filter (vs. rx-all-multicast). - This chip uses a 512 element hash table based on the Ethernet CRC. */ -static const int multicast_filter_limit = 100; - -/* Set the copy breakpoint for the copy-only-tiny-frames scheme. - Setting to > 1518 effectively disables this feature. */ -static int rx_copybreak; - -static int dspcfg_workaround = 1; - -/* Used to pass the media type, etc. - Both 'options[]' and 'full_duplex[]' should exist for driver - interoperability. - The media type is usually passed in 'options[]'. -*/ -#define MAX_UNITS 8 /* More are supported, limit only on options */ -static int options[MAX_UNITS]; -static int full_duplex[MAX_UNITS]; - -/* Operational parameters that are set at compile time. */ - -/* Keep the ring sizes a power of two for compile efficiency. - The compiler will convert '%'<2^N> into a bit mask. - Making the Tx ring too large decreases the effectiveness of channel - bonding and packet priority. - There are no ill effects from too-large receive rings. */ -#define TX_RING_SIZE 16 -#define TX_QUEUE_LEN 10 /* Limit ring entries actually used, min 4. */ -#define RX_RING_SIZE 32 - -/* Operational parameters that usually are not changed. */ -/* Time in jiffies before concluding the transmitter is hung. */ -#define TX_TIMEOUT (2*HZ) - -#define NATSEMI_HW_TIMEOUT 400 -#define NATSEMI_TIMER_FREQ 5*HZ -#define NATSEMI_PG0_NREGS 64 -#define NATSEMI_RFDR_NREGS 8 -#define NATSEMI_PG1_NREGS 4 -#define NATSEMI_NREGS (NATSEMI_PG0_NREGS + NATSEMI_RFDR_NREGS + \ - NATSEMI_PG1_NREGS) -#define NATSEMI_REGS_VER 1 /* v1 added RFDR registers */ -#define NATSEMI_REGS_SIZE (NATSEMI_NREGS * sizeof(u32)) - -/* Buffer sizes: - * The nic writes 32-bit values, even if the upper bytes of - * a 32-bit value are beyond the end of the buffer. - */ -#define NATSEMI_HEADERS 22 /* 2*mac,type,vlan,crc */ -#define NATSEMI_PADDING 16 /* 2 bytes should be sufficient */ -#define NATSEMI_LONGPKT 1518 /* limit for normal packets */ -#define NATSEMI_RX_LIMIT 2046 /* maximum supported by hardware */ - -/* These identify the driver base version and may not be removed. */ -static const char version[] __devinitconst = - KERN_INFO DRV_NAME " dp8381x driver, version " - DRV_VERSION ", " DRV_RELDATE "\n" - " originally by Donald Becker \n" - " 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder\n"; - -MODULE_AUTHOR("Donald Becker "); -MODULE_DESCRIPTION("National Semiconductor DP8381x series PCI Ethernet driver"); -MODULE_LICENSE("GPL"); - -module_param(mtu, int, 0); -module_param(debug, int, 0); -module_param(rx_copybreak, int, 0); -module_param(dspcfg_workaround, int, 0); -module_param_array(options, int, NULL, 0); -module_param_array(full_duplex, int, NULL, 0); -MODULE_PARM_DESC(mtu, "DP8381x MTU (all boards)"); -MODULE_PARM_DESC(debug, "DP8381x default debug level"); -MODULE_PARM_DESC(rx_copybreak, - "DP8381x copy breakpoint for copy-only-tiny-frames"); -MODULE_PARM_DESC(dspcfg_workaround, "DP8381x: control DspCfg workaround"); -MODULE_PARM_DESC(options, - "DP8381x: Bits 0-3: media type, bit 17: full duplex"); -MODULE_PARM_DESC(full_duplex, "DP8381x full duplex setting(s) (1)"); - -/* - Theory of Operation - -I. Board Compatibility - -This driver is designed for National Semiconductor DP83815 PCI Ethernet NIC. -It also works with other chips in in the DP83810 series. - -II. Board-specific settings - -This driver requires the PCI interrupt line to be valid. -It honors the EEPROM-set values. - -III. Driver operation - -IIIa. Ring buffers - -This driver uses two statically allocated fixed-size descriptor lists -formed into rings by a branch from the final descriptor to the beginning of -the list. The ring sizes are set at compile time by RX/TX_RING_SIZE. -The NatSemi design uses a 'next descriptor' pointer that the driver forms -into a list. - -IIIb/c. Transmit/Receive Structure - -This driver uses a zero-copy receive and transmit scheme. -The driver allocates full frame size skbuffs for the Rx ring buffers at -open() time and passes the skb->data field to the chip as receive data -buffers. When an incoming frame is less than RX_COPYBREAK bytes long, -a fresh skbuff is allocated and the frame is copied to the new skbuff. -When the incoming frame is larger, the skbuff is passed directly up the -protocol stack. Buffers consumed this way are replaced by newly allocated -skbuffs in a later phase of receives. - -The RX_COPYBREAK value is chosen to trade-off the memory wasted by -using a full-sized skbuff for small frames vs. the copying costs of larger -frames. New boards are typically used in generously configured machines -and the underfilled buffers have negligible impact compared to the benefit of -a single allocation size, so the default value of zero results in never -copying packets. When copying is done, the cost is usually mitigated by using -a combined copy/checksum routine. Copying also preloads the cache, which is -most useful with small frames. - -A subtle aspect of the operation is that unaligned buffers are not permitted -by the hardware. Thus the IP header at offset 14 in an ethernet frame isn't -longword aligned for further processing. On copies frames are put into the -skbuff at an offset of "+2", 16-byte aligning the IP header. - -IIId. Synchronization - -Most operations are synchronized on the np->lock irq spinlock, except the -receive and transmit paths which are synchronised using a combination of -hardware descriptor ownership, disabling interrupts and NAPI poll scheduling. - -IVb. References - -http://www.scyld.com/expert/100mbps.html -http://www.scyld.com/expert/NWay.html -Datasheet is available from: -http://www.national.com/pf/DP/DP83815.html - -IVc. Errata - -None characterised. -*/ - - - -/* - * Support for fibre connections on Am79C874: - * This phy needs a special setup when connected to a fibre cable. - * http://www.amd.com/files/connectivitysolutions/networking/archivednetworking/22235.pdf - */ -#define PHYID_AM79C874 0x0022561b - -enum { - MII_MCTRL = 0x15, /* mode control register */ - MII_FX_SEL = 0x0001, /* 100BASE-FX (fiber) */ - MII_EN_SCRM = 0x0004, /* enable scrambler (tp) */ -}; - -enum { - NATSEMI_FLAG_IGNORE_PHY = 0x1, -}; - -/* array of board data directly indexed by pci_tbl[x].driver_data */ -static struct { - const char *name; - unsigned long flags; - unsigned int eeprom_size; -} natsemi_pci_info[] __devinitdata = { - { "Aculab E1/T1 PMXc cPCI carrier card", NATSEMI_FLAG_IGNORE_PHY, 128 }, - { "NatSemi DP8381[56]", 0, 24 }, -}; - -static DEFINE_PCI_DEVICE_TABLE(natsemi_pci_tbl) = { - { PCI_VENDOR_ID_NS, 0x0020, 0x12d9, 0x000c, 0, 0, 0 }, - { PCI_VENDOR_ID_NS, 0x0020, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 }, - { } /* terminate list */ -}; -MODULE_DEVICE_TABLE(pci, natsemi_pci_tbl); - -/* Offsets to the device registers. - Unlike software-only systems, device drivers interact with complex hardware. - It's not useful to define symbolic names for every register bit in the - device. -*/ -enum register_offsets { - ChipCmd = 0x00, - ChipConfig = 0x04, - EECtrl = 0x08, - PCIBusCfg = 0x0C, - IntrStatus = 0x10, - IntrMask = 0x14, - IntrEnable = 0x18, - IntrHoldoff = 0x1C, /* DP83816 only */ - TxRingPtr = 0x20, - TxConfig = 0x24, - RxRingPtr = 0x30, - RxConfig = 0x34, - ClkRun = 0x3C, - WOLCmd = 0x40, - PauseCmd = 0x44, - RxFilterAddr = 0x48, - RxFilterData = 0x4C, - BootRomAddr = 0x50, - BootRomData = 0x54, - SiliconRev = 0x58, - StatsCtrl = 0x5C, - StatsData = 0x60, - RxPktErrs = 0x60, - RxMissed = 0x68, - RxCRCErrs = 0x64, - BasicControl = 0x80, - BasicStatus = 0x84, - AnegAdv = 0x90, - AnegPeer = 0x94, - PhyStatus = 0xC0, - MIntrCtrl = 0xC4, - MIntrStatus = 0xC8, - PhyCtrl = 0xE4, - - /* These are from the spec, around page 78... on a separate table. - * The meaning of these registers depend on the value of PGSEL. */ - PGSEL = 0xCC, - PMDCSR = 0xE4, - TSTDAT = 0xFC, - DSPCFG = 0xF4, - SDCFG = 0xF8 -}; -/* the values for the 'magic' registers above (PGSEL=1) */ -#define PMDCSR_VAL 0x189c /* enable preferred adaptation circuitry */ -#define TSTDAT_VAL 0x0 -#define DSPCFG_VAL 0x5040 -#define SDCFG_VAL 0x008c /* set voltage thresholds for Signal Detect */ -#define DSPCFG_LOCK 0x20 /* coefficient lock bit in DSPCFG */ -#define DSPCFG_COEF 0x1000 /* see coefficient (in TSTDAT) bit in DSPCFG */ -#define TSTDAT_FIXED 0xe8 /* magic number for bad coefficients */ - -/* misc PCI space registers */ -enum pci_register_offsets { - PCIPM = 0x44, -}; - -enum ChipCmd_bits { - ChipReset = 0x100, - RxReset = 0x20, - TxReset = 0x10, - RxOff = 0x08, - RxOn = 0x04, - TxOff = 0x02, - TxOn = 0x01, -}; - -enum ChipConfig_bits { - CfgPhyDis = 0x200, - CfgPhyRst = 0x400, - CfgExtPhy = 0x1000, - CfgAnegEnable = 0x2000, - CfgAneg100 = 0x4000, - CfgAnegFull = 0x8000, - CfgAnegDone = 0x8000000, - CfgFullDuplex = 0x20000000, - CfgSpeed100 = 0x40000000, - CfgLink = 0x80000000, -}; - -enum EECtrl_bits { - EE_ShiftClk = 0x04, - EE_DataIn = 0x01, - EE_ChipSelect = 0x08, - EE_DataOut = 0x02, - MII_Data = 0x10, - MII_Write = 0x20, - MII_ShiftClk = 0x40, -}; - -enum PCIBusCfg_bits { - EepromReload = 0x4, -}; - -/* Bits in the interrupt status/mask registers. */ -enum IntrStatus_bits { - IntrRxDone = 0x0001, - IntrRxIntr = 0x0002, - IntrRxErr = 0x0004, - IntrRxEarly = 0x0008, - IntrRxIdle = 0x0010, - IntrRxOverrun = 0x0020, - IntrTxDone = 0x0040, - IntrTxIntr = 0x0080, - IntrTxErr = 0x0100, - IntrTxIdle = 0x0200, - IntrTxUnderrun = 0x0400, - StatsMax = 0x0800, - SWInt = 0x1000, - WOLPkt = 0x2000, - LinkChange = 0x4000, - IntrHighBits = 0x8000, - RxStatusFIFOOver = 0x10000, - IntrPCIErr = 0xf00000, - RxResetDone = 0x1000000, - TxResetDone = 0x2000000, - IntrAbnormalSummary = 0xCD20, -}; - -/* - * Default Interrupts: - * Rx OK, Rx Packet Error, Rx Overrun, - * Tx OK, Tx Packet Error, Tx Underrun, - * MIB Service, Phy Interrupt, High Bits, - * Rx Status FIFO overrun, - * Received Target Abort, Received Master Abort, - * Signalled System Error, Received Parity Error - */ -#define DEFAULT_INTR 0x00f1cd65 - -enum TxConfig_bits { - TxDrthMask = 0x3f, - TxFlthMask = 0x3f00, - TxMxdmaMask = 0x700000, - TxMxdma_512 = 0x0, - TxMxdma_4 = 0x100000, - TxMxdma_8 = 0x200000, - TxMxdma_16 = 0x300000, - TxMxdma_32 = 0x400000, - TxMxdma_64 = 0x500000, - TxMxdma_128 = 0x600000, - TxMxdma_256 = 0x700000, - TxCollRetry = 0x800000, - TxAutoPad = 0x10000000, - TxMacLoop = 0x20000000, - TxHeartIgn = 0x40000000, - TxCarrierIgn = 0x80000000 -}; - -/* - * Tx Configuration: - * - 256 byte DMA burst length - * - fill threshold 512 bytes (i.e. restart DMA when 512 bytes are free) - * - 64 bytes initial drain threshold (i.e. begin actual transmission - * when 64 byte are in the fifo) - * - on tx underruns, increase drain threshold by 64. - * - at most use a drain threshold of 1472 bytes: The sum of the fill - * threshold and the drain threshold must be less than 2016 bytes. - * - */ -#define TX_FLTH_VAL ((512/32) << 8) -#define TX_DRTH_VAL_START (64/32) -#define TX_DRTH_VAL_INC 2 -#define TX_DRTH_VAL_LIMIT (1472/32) - -enum RxConfig_bits { - RxDrthMask = 0x3e, - RxMxdmaMask = 0x700000, - RxMxdma_512 = 0x0, - RxMxdma_4 = 0x100000, - RxMxdma_8 = 0x200000, - RxMxdma_16 = 0x300000, - RxMxdma_32 = 0x400000, - RxMxdma_64 = 0x500000, - RxMxdma_128 = 0x600000, - RxMxdma_256 = 0x700000, - RxAcceptLong = 0x8000000, - RxAcceptTx = 0x10000000, - RxAcceptRunt = 0x40000000, - RxAcceptErr = 0x80000000 -}; -#define RX_DRTH_VAL (128/8) - -enum ClkRun_bits { - PMEEnable = 0x100, - PMEStatus = 0x8000, -}; - -enum WolCmd_bits { - WakePhy = 0x1, - WakeUnicast = 0x2, - WakeMulticast = 0x4, - WakeBroadcast = 0x8, - WakeArp = 0x10, - WakePMatch0 = 0x20, - WakePMatch1 = 0x40, - WakePMatch2 = 0x80, - WakePMatch3 = 0x100, - WakeMagic = 0x200, - WakeMagicSecure = 0x400, - SecureHack = 0x100000, - WokePhy = 0x400000, - WokeUnicast = 0x800000, - WokeMulticast = 0x1000000, - WokeBroadcast = 0x2000000, - WokeArp = 0x4000000, - WokePMatch0 = 0x8000000, - WokePMatch1 = 0x10000000, - WokePMatch2 = 0x20000000, - WokePMatch3 = 0x40000000, - WokeMagic = 0x80000000, - WakeOptsSummary = 0x7ff -}; - -enum RxFilterAddr_bits { - RFCRAddressMask = 0x3ff, - AcceptMulticast = 0x00200000, - AcceptMyPhys = 0x08000000, - AcceptAllPhys = 0x10000000, - AcceptAllMulticast = 0x20000000, - AcceptBroadcast = 0x40000000, - RxFilterEnable = 0x80000000 -}; - -enum StatsCtrl_bits { - StatsWarn = 0x1, - StatsFreeze = 0x2, - StatsClear = 0x4, - StatsStrobe = 0x8, -}; - -enum MIntrCtrl_bits { - MICRIntEn = 0x2, -}; - -enum PhyCtrl_bits { - PhyAddrMask = 0x1f, -}; - -#define PHY_ADDR_NONE 32 -#define PHY_ADDR_INTERNAL 1 - -/* values we might find in the silicon revision register */ -#define SRR_DP83815_C 0x0302 -#define SRR_DP83815_D 0x0403 -#define SRR_DP83816_A4 0x0504 -#define SRR_DP83816_A5 0x0505 - -/* The Rx and Tx buffer descriptors. */ -/* Note that using only 32 bit fields simplifies conversion to big-endian - architectures. */ -struct netdev_desc { - __le32 next_desc; - __le32 cmd_status; - __le32 addr; - __le32 software_use; -}; - -/* Bits in network_desc.status */ -enum desc_status_bits { - DescOwn=0x80000000, DescMore=0x40000000, DescIntr=0x20000000, - DescNoCRC=0x10000000, DescPktOK=0x08000000, - DescSizeMask=0xfff, - - DescTxAbort=0x04000000, DescTxFIFO=0x02000000, - DescTxCarrier=0x01000000, DescTxDefer=0x00800000, - DescTxExcDefer=0x00400000, DescTxOOWCol=0x00200000, - DescTxExcColl=0x00100000, DescTxCollCount=0x000f0000, - - DescRxAbort=0x04000000, DescRxOver=0x02000000, - DescRxDest=0x01800000, DescRxLong=0x00400000, - DescRxRunt=0x00200000, DescRxInvalid=0x00100000, - DescRxCRC=0x00080000, DescRxAlign=0x00040000, - DescRxLoop=0x00020000, DesRxColl=0x00010000, -}; - -struct netdev_private { - /* Descriptor rings first for alignment */ - dma_addr_t ring_dma; - struct netdev_desc *rx_ring; - struct netdev_desc *tx_ring; - /* The addresses of receive-in-place skbuffs */ - struct sk_buff *rx_skbuff[RX_RING_SIZE]; - dma_addr_t rx_dma[RX_RING_SIZE]; - /* address of a sent-in-place packet/buffer, for later free() */ - struct sk_buff *tx_skbuff[TX_RING_SIZE]; - dma_addr_t tx_dma[TX_RING_SIZE]; - struct net_device *dev; - struct napi_struct napi; - /* Media monitoring timer */ - struct timer_list timer; - /* Frequently used values: keep some adjacent for cache effect */ - struct pci_dev *pci_dev; - struct netdev_desc *rx_head_desc; - /* Producer/consumer ring indices */ - unsigned int cur_rx, dirty_rx; - unsigned int cur_tx, dirty_tx; - /* Based on MTU+slack. */ - unsigned int rx_buf_sz; - int oom; - /* Interrupt status */ - u32 intr_status; - /* Do not touch the nic registers */ - int hands_off; - /* Don't pay attention to the reported link state. */ - int ignore_phy; - /* external phy that is used: only valid if dev->if_port != PORT_TP */ - int mii; - int phy_addr_external; - unsigned int full_duplex; - /* Rx filter */ - u32 cur_rx_mode; - u32 rx_filter[16]; - /* FIFO and PCI burst thresholds */ - u32 tx_config, rx_config; - /* original contents of ClkRun register */ - u32 SavedClkRun; - /* silicon revision */ - u32 srr; - /* expected DSPCFG value */ - u16 dspcfg; - int dspcfg_workaround; - /* parms saved in ethtool format */ - u16 speed; /* The forced speed, 10Mb, 100Mb, gigabit */ - u8 duplex; /* Duplex, half or full */ - u8 autoneg; /* Autonegotiation enabled */ - /* MII transceiver section */ - u16 advertising; - unsigned int iosize; - spinlock_t lock; - u32 msg_enable; - /* EEPROM data */ - int eeprom_size; -}; - -static void move_int_phy(struct net_device *dev, int addr); -static int eeprom_read(void __iomem *ioaddr, int location); -static int mdio_read(struct net_device *dev, int reg); -static void mdio_write(struct net_device *dev, int reg, u16 data); -static void init_phy_fixup(struct net_device *dev); -static int miiport_read(struct net_device *dev, int phy_id, int reg); -static void miiport_write(struct net_device *dev, int phy_id, int reg, u16 data); -static int find_mii(struct net_device *dev); -static void natsemi_reset(struct net_device *dev); -static void natsemi_reload_eeprom(struct net_device *dev); -static void natsemi_stop_rxtx(struct net_device *dev); -static int netdev_open(struct net_device *dev); -static void do_cable_magic(struct net_device *dev); -static void undo_cable_magic(struct net_device *dev); -static void check_link(struct net_device *dev); -static void netdev_timer(unsigned long data); -static void dump_ring(struct net_device *dev); -static void ns_tx_timeout(struct net_device *dev); -static int alloc_ring(struct net_device *dev); -static void refill_rx(struct net_device *dev); -static void init_ring(struct net_device *dev); -static void drain_tx(struct net_device *dev); -static void drain_ring(struct net_device *dev); -static void free_ring(struct net_device *dev); -static void reinit_ring(struct net_device *dev); -static void init_registers(struct net_device *dev); -static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev); -static irqreturn_t intr_handler(int irq, void *dev_instance); -static void netdev_error(struct net_device *dev, int intr_status); -static int natsemi_poll(struct napi_struct *napi, int budget); -static void netdev_rx(struct net_device *dev, int *work_done, int work_to_do); -static void netdev_tx_done(struct net_device *dev); -static int natsemi_change_mtu(struct net_device *dev, int new_mtu); -#ifdef CONFIG_NET_POLL_CONTROLLER -static void natsemi_poll_controller(struct net_device *dev); -#endif -static void __set_rx_mode(struct net_device *dev); -static void set_rx_mode(struct net_device *dev); -static void __get_stats(struct net_device *dev); -static struct net_device_stats *get_stats(struct net_device *dev); -static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); -static int netdev_set_wol(struct net_device *dev, u32 newval); -static int netdev_get_wol(struct net_device *dev, u32 *supported, u32 *cur); -static int netdev_set_sopass(struct net_device *dev, u8 *newval); -static int netdev_get_sopass(struct net_device *dev, u8 *data); -static int netdev_get_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd); -static int netdev_set_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd); -static void enable_wol_mode(struct net_device *dev, int enable_intr); -static int netdev_close(struct net_device *dev); -static int netdev_get_regs(struct net_device *dev, u8 *buf); -static int netdev_get_eeprom(struct net_device *dev, u8 *buf); -static const struct ethtool_ops ethtool_ops; - -#define NATSEMI_ATTR(_name) \ -static ssize_t natsemi_show_##_name(struct device *dev, \ - struct device_attribute *attr, char *buf); \ - static ssize_t natsemi_set_##_name(struct device *dev, \ - struct device_attribute *attr, \ - const char *buf, size_t count); \ - static DEVICE_ATTR(_name, 0644, natsemi_show_##_name, natsemi_set_##_name) - -#define NATSEMI_CREATE_FILE(_dev, _name) \ - device_create_file(&_dev->dev, &dev_attr_##_name) -#define NATSEMI_REMOVE_FILE(_dev, _name) \ - device_remove_file(&_dev->dev, &dev_attr_##_name) - -NATSEMI_ATTR(dspcfg_workaround); - -static ssize_t natsemi_show_dspcfg_workaround(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct netdev_private *np = netdev_priv(to_net_dev(dev)); - - return sprintf(buf, "%s\n", np->dspcfg_workaround ? "on" : "off"); -} - -static ssize_t natsemi_set_dspcfg_workaround(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct netdev_private *np = netdev_priv(to_net_dev(dev)); - int new_setting; - unsigned long flags; - - /* Find out the new setting */ - if (!strncmp("on", buf, count - 1) || !strncmp("1", buf, count - 1)) - new_setting = 1; - else if (!strncmp("off", buf, count - 1) || - !strncmp("0", buf, count - 1)) - new_setting = 0; - else - return count; - - spin_lock_irqsave(&np->lock, flags); - - np->dspcfg_workaround = new_setting; - - spin_unlock_irqrestore(&np->lock, flags); - - return count; -} - -static inline void __iomem *ns_ioaddr(struct net_device *dev) -{ - return (void __iomem *) dev->base_addr; -} - -static inline void natsemi_irq_enable(struct net_device *dev) -{ - writel(1, ns_ioaddr(dev) + IntrEnable); - readl(ns_ioaddr(dev) + IntrEnable); -} - -static inline void natsemi_irq_disable(struct net_device *dev) -{ - writel(0, ns_ioaddr(dev) + IntrEnable); - readl(ns_ioaddr(dev) + IntrEnable); -} - -static void move_int_phy(struct net_device *dev, int addr) -{ - struct netdev_private *np = netdev_priv(dev); - void __iomem *ioaddr = ns_ioaddr(dev); - int target = 31; - - /* - * The internal phy is visible on the external mii bus. Therefore we must - * move it away before we can send commands to an external phy. - * There are two addresses we must avoid: - * - the address on the external phy that is used for transmission. - * - the address that we want to access. User space can access phys - * on the mii bus with SIOCGMIIREG/SIOCSMIIREG, independent from the - * phy that is used for transmission. - */ - - if (target == addr) - target--; - if (target == np->phy_addr_external) - target--; - writew(target, ioaddr + PhyCtrl); - readw(ioaddr + PhyCtrl); - udelay(1); -} - -static void __devinit natsemi_init_media (struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - u32 tmp; - - if (np->ignore_phy) - netif_carrier_on(dev); - else - netif_carrier_off(dev); - - /* get the initial settings from hardware */ - tmp = mdio_read(dev, MII_BMCR); - np->speed = (tmp & BMCR_SPEED100)? SPEED_100 : SPEED_10; - np->duplex = (tmp & BMCR_FULLDPLX)? DUPLEX_FULL : DUPLEX_HALF; - np->autoneg = (tmp & BMCR_ANENABLE)? AUTONEG_ENABLE: AUTONEG_DISABLE; - np->advertising= mdio_read(dev, MII_ADVERTISE); - - if ((np->advertising & ADVERTISE_ALL) != ADVERTISE_ALL && - netif_msg_probe(np)) { - printk(KERN_INFO "natsemi %s: Transceiver default autonegotiation %s " - "10%s %s duplex.\n", - pci_name(np->pci_dev), - (mdio_read(dev, MII_BMCR) & BMCR_ANENABLE)? - "enabled, advertise" : "disabled, force", - (np->advertising & - (ADVERTISE_100FULL|ADVERTISE_100HALF))? - "0" : "", - (np->advertising & - (ADVERTISE_100FULL|ADVERTISE_10FULL))? - "full" : "half"); - } - if (netif_msg_probe(np)) - printk(KERN_INFO - "natsemi %s: Transceiver status %#04x advertising %#04x.\n", - pci_name(np->pci_dev), mdio_read(dev, MII_BMSR), - np->advertising); - -} - -static const struct net_device_ops natsemi_netdev_ops = { - .ndo_open = netdev_open, - .ndo_stop = netdev_close, - .ndo_start_xmit = start_tx, - .ndo_get_stats = get_stats, - .ndo_set_multicast_list = set_rx_mode, - .ndo_change_mtu = natsemi_change_mtu, - .ndo_do_ioctl = netdev_ioctl, - .ndo_tx_timeout = ns_tx_timeout, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = natsemi_poll_controller, -#endif -}; - -static int __devinit natsemi_probe1 (struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - struct net_device *dev; - struct netdev_private *np; - int i, option, irq, chip_idx = ent->driver_data; - static int find_cnt = -1; - resource_size_t iostart; - unsigned long iosize; - void __iomem *ioaddr; - const int pcibar = 1; /* PCI base address register */ - int prev_eedata; - u32 tmp; - -/* when built into the kernel, we only print version if device is found */ -#ifndef MODULE - static int printed_version; - if (!printed_version++) - printk(version); -#endif - - i = pci_enable_device(pdev); - if (i) return i; - - /* natsemi has a non-standard PM control register - * in PCI config space. Some boards apparently need - * to be brought to D0 in this manner. - */ - pci_read_config_dword(pdev, PCIPM, &tmp); - if (tmp & PCI_PM_CTRL_STATE_MASK) { - /* D0 state, disable PME assertion */ - u32 newtmp = tmp & ~PCI_PM_CTRL_STATE_MASK; - pci_write_config_dword(pdev, PCIPM, newtmp); - } - - find_cnt++; - iostart = pci_resource_start(pdev, pcibar); - iosize = pci_resource_len(pdev, pcibar); - irq = pdev->irq; - - pci_set_master(pdev); - - dev = alloc_etherdev(sizeof (struct netdev_private)); - if (!dev) - return -ENOMEM; - SET_NETDEV_DEV(dev, &pdev->dev); - - i = pci_request_regions(pdev, DRV_NAME); - if (i) - goto err_pci_request_regions; - - ioaddr = ioremap(iostart, iosize); - if (!ioaddr) { - i = -ENOMEM; - goto err_ioremap; - } - - /* Work around the dropped serial bit. */ - prev_eedata = eeprom_read(ioaddr, 6); - for (i = 0; i < 3; i++) { - int eedata = eeprom_read(ioaddr, i + 7); - dev->dev_addr[i*2] = (eedata << 1) + (prev_eedata >> 15); - dev->dev_addr[i*2+1] = eedata >> 7; - prev_eedata = eedata; - } - - /* Store MAC Address in perm_addr */ - memcpy(dev->perm_addr, dev->dev_addr, ETH_ALEN); - - dev->base_addr = (unsigned long __force) ioaddr; - dev->irq = irq; - - np = netdev_priv(dev); - netif_napi_add(dev, &np->napi, natsemi_poll, 64); - np->dev = dev; - - np->pci_dev = pdev; - pci_set_drvdata(pdev, dev); - np->iosize = iosize; - spin_lock_init(&np->lock); - np->msg_enable = (debug >= 0) ? (1<hands_off = 0; - np->intr_status = 0; - np->eeprom_size = natsemi_pci_info[chip_idx].eeprom_size; - if (natsemi_pci_info[chip_idx].flags & NATSEMI_FLAG_IGNORE_PHY) - np->ignore_phy = 1; - else - np->ignore_phy = 0; - np->dspcfg_workaround = dspcfg_workaround; - - /* Initial port: - * - If configured to ignore the PHY set up for external. - * - If the nic was configured to use an external phy and if find_mii - * finds a phy: use external port, first phy that replies. - * - Otherwise: internal port. - * Note that the phy address for the internal phy doesn't matter: - * The address would be used to access a phy over the mii bus, but - * the internal phy is accessed through mapped registers. - */ - if (np->ignore_phy || readl(ioaddr + ChipConfig) & CfgExtPhy) - dev->if_port = PORT_MII; - else - dev->if_port = PORT_TP; - /* Reset the chip to erase previous misconfiguration. */ - natsemi_reload_eeprom(dev); - natsemi_reset(dev); - - if (dev->if_port != PORT_TP) { - np->phy_addr_external = find_mii(dev); - /* If we're ignoring the PHY it doesn't matter if we can't - * find one. */ - if (!np->ignore_phy && np->phy_addr_external == PHY_ADDR_NONE) { - dev->if_port = PORT_TP; - np->phy_addr_external = PHY_ADDR_INTERNAL; - } - } else { - np->phy_addr_external = PHY_ADDR_INTERNAL; - } - - option = find_cnt < MAX_UNITS ? options[find_cnt] : 0; - if (dev->mem_start) - option = dev->mem_start; - - /* The lower four bits are the media type. */ - if (option) { - if (option & 0x200) - np->full_duplex = 1; - if (option & 15) - printk(KERN_INFO - "natsemi %s: ignoring user supplied media type %d", - pci_name(np->pci_dev), option & 15); - } - if (find_cnt < MAX_UNITS && full_duplex[find_cnt]) - np->full_duplex = 1; - - dev->netdev_ops = &natsemi_netdev_ops; - dev->watchdog_timeo = TX_TIMEOUT; - - SET_ETHTOOL_OPS(dev, ðtool_ops); - - if (mtu) - dev->mtu = mtu; - - natsemi_init_media(dev); - - /* save the silicon revision for later querying */ - np->srr = readl(ioaddr + SiliconRev); - if (netif_msg_hw(np)) - printk(KERN_INFO "natsemi %s: silicon revision %#04x.\n", - pci_name(np->pci_dev), np->srr); - - i = register_netdev(dev); - if (i) - goto err_register_netdev; - - if (NATSEMI_CREATE_FILE(pdev, dspcfg_workaround)) - goto err_create_file; - - if (netif_msg_drv(np)) { - printk(KERN_INFO "natsemi %s: %s at %#08llx " - "(%s), %pM, IRQ %d", - dev->name, natsemi_pci_info[chip_idx].name, - (unsigned long long)iostart, pci_name(np->pci_dev), - dev->dev_addr, irq); - if (dev->if_port == PORT_TP) - printk(", port TP.\n"); - else if (np->ignore_phy) - printk(", port MII, ignoring PHY\n"); - else - printk(", port MII, phy ad %d.\n", np->phy_addr_external); - } - return 0; - - err_create_file: - unregister_netdev(dev); - - err_register_netdev: - iounmap(ioaddr); - - err_ioremap: - pci_release_regions(pdev); - pci_set_drvdata(pdev, NULL); - - err_pci_request_regions: - free_netdev(dev); - return i; -} - - -/* Read the EEPROM and MII Management Data I/O (MDIO) interfaces. - The EEPROM code is for the common 93c06/46 EEPROMs with 6 bit addresses. */ - -/* Delay between EEPROM clock transitions. - No extra delay is needed with 33Mhz PCI, but future 66Mhz access may need - a delay. Note that pre-2.0.34 kernels had a cache-alignment bug that - made udelay() unreliable. - The old method of using an ISA access as a delay, __SLOW_DOWN_IO__, is - deprecated. -*/ -#define eeprom_delay(ee_addr) readl(ee_addr) - -#define EE_Write0 (EE_ChipSelect) -#define EE_Write1 (EE_ChipSelect | EE_DataIn) - -/* The EEPROM commands include the alway-set leading bit. */ -enum EEPROM_Cmds { - EE_WriteCmd=(5 << 6), EE_ReadCmd=(6 << 6), EE_EraseCmd=(7 << 6), -}; - -static int eeprom_read(void __iomem *addr, int location) -{ - int i; - int retval = 0; - void __iomem *ee_addr = addr + EECtrl; - int read_cmd = location | EE_ReadCmd; - - writel(EE_Write0, ee_addr); - - /* Shift the read command bits out. */ - for (i = 10; i >= 0; i--) { - short dataval = (read_cmd & (1 << i)) ? EE_Write1 : EE_Write0; - writel(dataval, ee_addr); - eeprom_delay(ee_addr); - writel(dataval | EE_ShiftClk, ee_addr); - eeprom_delay(ee_addr); - } - writel(EE_ChipSelect, ee_addr); - eeprom_delay(ee_addr); - - for (i = 0; i < 16; i++) { - writel(EE_ChipSelect | EE_ShiftClk, ee_addr); - eeprom_delay(ee_addr); - retval |= (readl(ee_addr) & EE_DataOut) ? 1 << i : 0; - writel(EE_ChipSelect, ee_addr); - eeprom_delay(ee_addr); - } - - /* Terminate the EEPROM access. */ - writel(EE_Write0, ee_addr); - writel(0, ee_addr); - return retval; -} - -/* MII transceiver control section. - * The 83815 series has an internal transceiver, and we present the - * internal management registers as if they were MII connected. - * External Phy registers are referenced through the MII interface. - */ - -/* clock transitions >= 20ns (25MHz) - * One readl should be good to PCI @ 100MHz - */ -#define mii_delay(ioaddr) readl(ioaddr + EECtrl) - -static int mii_getbit (struct net_device *dev) -{ - int data; - void __iomem *ioaddr = ns_ioaddr(dev); - - writel(MII_ShiftClk, ioaddr + EECtrl); - data = readl(ioaddr + EECtrl); - writel(0, ioaddr + EECtrl); - mii_delay(ioaddr); - return (data & MII_Data)? 1 : 0; -} - -static void mii_send_bits (struct net_device *dev, u32 data, int len) -{ - u32 i; - void __iomem *ioaddr = ns_ioaddr(dev); - - for (i = (1 << (len-1)); i; i >>= 1) - { - u32 mdio_val = MII_Write | ((data & i)? MII_Data : 0); - writel(mdio_val, ioaddr + EECtrl); - mii_delay(ioaddr); - writel(mdio_val | MII_ShiftClk, ioaddr + EECtrl); - mii_delay(ioaddr); - } - writel(0, ioaddr + EECtrl); - mii_delay(ioaddr); -} - -static int miiport_read(struct net_device *dev, int phy_id, int reg) -{ - u32 cmd; - int i; - u32 retval = 0; - - /* Ensure sync */ - mii_send_bits (dev, 0xffffffff, 32); - /* ST(2), OP(2), ADDR(5), REG#(5), TA(2), Data(16) total 32 bits */ - /* ST,OP = 0110'b for read operation */ - cmd = (0x06 << 10) | (phy_id << 5) | reg; - mii_send_bits (dev, cmd, 14); - /* Turnaround */ - if (mii_getbit (dev)) - return 0; - /* Read data */ - for (i = 0; i < 16; i++) { - retval <<= 1; - retval |= mii_getbit (dev); - } - /* End cycle */ - mii_getbit (dev); - return retval; -} - -static void miiport_write(struct net_device *dev, int phy_id, int reg, u16 data) -{ - u32 cmd; - - /* Ensure sync */ - mii_send_bits (dev, 0xffffffff, 32); - /* ST(2), OP(2), ADDR(5), REG#(5), TA(2), Data(16) total 32 bits */ - /* ST,OP,AAAAA,RRRRR,TA = 0101xxxxxxxxxx10'b = 0x5002 for write */ - cmd = (0x5002 << 16) | (phy_id << 23) | (reg << 18) | data; - mii_send_bits (dev, cmd, 32); - /* End cycle */ - mii_getbit (dev); -} - -static int mdio_read(struct net_device *dev, int reg) -{ - struct netdev_private *np = netdev_priv(dev); - void __iomem *ioaddr = ns_ioaddr(dev); - - /* The 83815 series has two ports: - * - an internal transceiver - * - an external mii bus - */ - if (dev->if_port == PORT_TP) - return readw(ioaddr+BasicControl+(reg<<2)); - else - return miiport_read(dev, np->phy_addr_external, reg); -} - -static void mdio_write(struct net_device *dev, int reg, u16 data) -{ - struct netdev_private *np = netdev_priv(dev); - void __iomem *ioaddr = ns_ioaddr(dev); - - /* The 83815 series has an internal transceiver; handle separately */ - if (dev->if_port == PORT_TP) - writew(data, ioaddr+BasicControl+(reg<<2)); - else - miiport_write(dev, np->phy_addr_external, reg, data); -} - -static void init_phy_fixup(struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - void __iomem *ioaddr = ns_ioaddr(dev); - int i; - u32 cfg; - u16 tmp; - - /* restore stuff lost when power was out */ - tmp = mdio_read(dev, MII_BMCR); - if (np->autoneg == AUTONEG_ENABLE) { - /* renegotiate if something changed */ - if ((tmp & BMCR_ANENABLE) == 0 || - np->advertising != mdio_read(dev, MII_ADVERTISE)) - { - /* turn on autonegotiation and force negotiation */ - tmp |= (BMCR_ANENABLE | BMCR_ANRESTART); - mdio_write(dev, MII_ADVERTISE, np->advertising); - } - } else { - /* turn off auto negotiation, set speed and duplexity */ - tmp &= ~(BMCR_ANENABLE | BMCR_SPEED100 | BMCR_FULLDPLX); - if (np->speed == SPEED_100) - tmp |= BMCR_SPEED100; - if (np->duplex == DUPLEX_FULL) - tmp |= BMCR_FULLDPLX; - /* - * Note: there is no good way to inform the link partner - * that our capabilities changed. The user has to unplug - * and replug the network cable after some changes, e.g. - * after switching from 10HD, autoneg off to 100 HD, - * autoneg off. - */ - } - mdio_write(dev, MII_BMCR, tmp); - readl(ioaddr + ChipConfig); - udelay(1); - - /* find out what phy this is */ - np->mii = (mdio_read(dev, MII_PHYSID1) << 16) - + mdio_read(dev, MII_PHYSID2); - - /* handle external phys here */ - switch (np->mii) { - case PHYID_AM79C874: - /* phy specific configuration for fibre/tp operation */ - tmp = mdio_read(dev, MII_MCTRL); - tmp &= ~(MII_FX_SEL | MII_EN_SCRM); - if (dev->if_port == PORT_FIBRE) - tmp |= MII_FX_SEL; - else - tmp |= MII_EN_SCRM; - mdio_write(dev, MII_MCTRL, tmp); - break; - default: - break; - } - cfg = readl(ioaddr + ChipConfig); - if (cfg & CfgExtPhy) - return; - - /* On page 78 of the spec, they recommend some settings for "optimum - performance" to be done in sequence. These settings optimize some - of the 100Mbit autodetection circuitry. They say we only want to - do this for rev C of the chip, but engineers at NSC (Bradley - Kennedy) recommends always setting them. If you don't, you get - errors on some autonegotiations that make the device unusable. - - It seems that the DSP needs a few usec to reinitialize after - the start of the phy. Just retry writing these values until they - stick. - */ - for (i=0;idspcfg = (np->srr <= SRR_DP83815_C)? - DSPCFG_VAL : (DSPCFG_COEF | readw(ioaddr + DSPCFG)); - writew(np->dspcfg, ioaddr + DSPCFG); - writew(SDCFG_VAL, ioaddr + SDCFG); - writew(0, ioaddr + PGSEL); - readl(ioaddr + ChipConfig); - udelay(10); - - writew(1, ioaddr + PGSEL); - dspcfg = readw(ioaddr + DSPCFG); - writew(0, ioaddr + PGSEL); - if (np->dspcfg == dspcfg) - break; - } - - if (netif_msg_link(np)) { - if (i==NATSEMI_HW_TIMEOUT) { - printk(KERN_INFO - "%s: DSPCFG mismatch after retrying for %d usec.\n", - dev->name, i*10); - } else { - printk(KERN_INFO - "%s: DSPCFG accepted after %d usec.\n", - dev->name, i*10); - } - } - /* - * Enable PHY Specific event based interrupts. Link state change - * and Auto-Negotiation Completion are among the affected. - * Read the intr status to clear it (needed for wake events). - */ - readw(ioaddr + MIntrStatus); - writew(MICRIntEn, ioaddr + MIntrCtrl); -} - -static int switch_port_external(struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - void __iomem *ioaddr = ns_ioaddr(dev); - u32 cfg; - - cfg = readl(ioaddr + ChipConfig); - if (cfg & CfgExtPhy) - return 0; - - if (netif_msg_link(np)) { - printk(KERN_INFO "%s: switching to external transceiver.\n", - dev->name); - } - - /* 1) switch back to external phy */ - writel(cfg | (CfgExtPhy | CfgPhyDis), ioaddr + ChipConfig); - readl(ioaddr + ChipConfig); - udelay(1); - - /* 2) reset the external phy: */ - /* resetting the external PHY has been known to cause a hub supplying - * power over Ethernet to kill the power. We don't want to kill - * power to this computer, so we avoid resetting the phy. - */ - - /* 3) reinit the phy fixup, it got lost during power down. */ - move_int_phy(dev, np->phy_addr_external); - init_phy_fixup(dev); - - return 1; -} - -static int switch_port_internal(struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - void __iomem *ioaddr = ns_ioaddr(dev); - int i; - u32 cfg; - u16 bmcr; - - cfg = readl(ioaddr + ChipConfig); - if (!(cfg &CfgExtPhy)) - return 0; - - if (netif_msg_link(np)) { - printk(KERN_INFO "%s: switching to internal transceiver.\n", - dev->name); - } - /* 1) switch back to internal phy: */ - cfg = cfg & ~(CfgExtPhy | CfgPhyDis); - writel(cfg, ioaddr + ChipConfig); - readl(ioaddr + ChipConfig); - udelay(1); - - /* 2) reset the internal phy: */ - bmcr = readw(ioaddr+BasicControl+(MII_BMCR<<2)); - writel(bmcr | BMCR_RESET, ioaddr+BasicControl+(MII_BMCR<<2)); - readl(ioaddr + ChipConfig); - udelay(10); - for (i=0;iname, i*10); - } - /* 3) reinit the phy fixup, it got lost during power down. */ - init_phy_fixup(dev); - - return 1; -} - -/* Scan for a PHY on the external mii bus. - * There are two tricky points: - * - Do not scan while the internal phy is enabled. The internal phy will - * crash: e.g. reads from the DSPCFG register will return odd values and - * the nasty random phy reset code will reset the nic every few seconds. - * - The internal phy must be moved around, an external phy could - * have the same address as the internal phy. - */ -static int find_mii(struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - int tmp; - int i; - int did_switch; - - /* Switch to external phy */ - did_switch = switch_port_external(dev); - - /* Scan the possible phy addresses: - * - * PHY address 0 means that the phy is in isolate mode. Not yet - * supported due to lack of test hardware. User space should - * handle it through ethtool. - */ - for (i = 1; i <= 31; i++) { - move_int_phy(dev, i); - tmp = miiport_read(dev, i, MII_BMSR); - if (tmp != 0xffff && tmp != 0x0000) { - /* found something! */ - np->mii = (mdio_read(dev, MII_PHYSID1) << 16) - + mdio_read(dev, MII_PHYSID2); - if (netif_msg_probe(np)) { - printk(KERN_INFO "natsemi %s: found external phy %08x at address %d.\n", - pci_name(np->pci_dev), np->mii, i); - } - break; - } - } - /* And switch back to internal phy: */ - if (did_switch) - switch_port_internal(dev); - return i; -} - -/* CFG bits [13:16] [18:23] */ -#define CFG_RESET_SAVE 0xfde000 -/* WCSR bits [0:4] [9:10] */ -#define WCSR_RESET_SAVE 0x61f -/* RFCR bits [20] [22] [27:31] */ -#define RFCR_RESET_SAVE 0xf8500000 - -static void natsemi_reset(struct net_device *dev) -{ - int i; - u32 cfg; - u32 wcsr; - u32 rfcr; - u16 pmatch[3]; - u16 sopass[3]; - struct netdev_private *np = netdev_priv(dev); - void __iomem *ioaddr = ns_ioaddr(dev); - - /* - * Resetting the chip causes some registers to be lost. - * Natsemi suggests NOT reloading the EEPROM while live, so instead - * we save the state that would have been loaded from EEPROM - * on a normal power-up (see the spec EEPROM map). This assumes - * whoever calls this will follow up with init_registers() eventually. - */ - - /* CFG */ - cfg = readl(ioaddr + ChipConfig) & CFG_RESET_SAVE; - /* WCSR */ - wcsr = readl(ioaddr + WOLCmd) & WCSR_RESET_SAVE; - /* RFCR */ - rfcr = readl(ioaddr + RxFilterAddr) & RFCR_RESET_SAVE; - /* PMATCH */ - for (i = 0; i < 3; i++) { - writel(i*2, ioaddr + RxFilterAddr); - pmatch[i] = readw(ioaddr + RxFilterData); - } - /* SOPAS */ - for (i = 0; i < 3; i++) { - writel(0xa+(i*2), ioaddr + RxFilterAddr); - sopass[i] = readw(ioaddr + RxFilterData); - } - - /* now whack the chip */ - writel(ChipReset, ioaddr + ChipCmd); - for (i=0;iname, i*5); - } else if (netif_msg_hw(np)) { - printk(KERN_DEBUG "%s: reset completed in %d usec.\n", - dev->name, i*5); - } - - /* restore CFG */ - cfg |= readl(ioaddr + ChipConfig) & ~CFG_RESET_SAVE; - /* turn on external phy if it was selected */ - if (dev->if_port == PORT_TP) - cfg &= ~(CfgExtPhy | CfgPhyDis); - else - cfg |= (CfgExtPhy | CfgPhyDis); - writel(cfg, ioaddr + ChipConfig); - /* restore WCSR */ - wcsr |= readl(ioaddr + WOLCmd) & ~WCSR_RESET_SAVE; - writel(wcsr, ioaddr + WOLCmd); - /* read RFCR */ - rfcr |= readl(ioaddr + RxFilterAddr) & ~RFCR_RESET_SAVE; - /* restore PMATCH */ - for (i = 0; i < 3; i++) { - writel(i*2, ioaddr + RxFilterAddr); - writew(pmatch[i], ioaddr + RxFilterData); - } - for (i = 0; i < 3; i++) { - writel(0xa+(i*2), ioaddr + RxFilterAddr); - writew(sopass[i], ioaddr + RxFilterData); - } - /* restore RFCR */ - writel(rfcr, ioaddr + RxFilterAddr); -} - -static void reset_rx(struct net_device *dev) -{ - int i; - struct netdev_private *np = netdev_priv(dev); - void __iomem *ioaddr = ns_ioaddr(dev); - - np->intr_status &= ~RxResetDone; - - writel(RxReset, ioaddr + ChipCmd); - - for (i=0;iintr_status |= readl(ioaddr + IntrStatus); - if (np->intr_status & RxResetDone) - break; - udelay(15); - } - if (i==NATSEMI_HW_TIMEOUT) { - printk(KERN_WARNING "%s: RX reset did not complete in %d usec.\n", - dev->name, i*15); - } else if (netif_msg_hw(np)) { - printk(KERN_WARNING "%s: RX reset took %d usec.\n", - dev->name, i*15); - } -} - -static void natsemi_reload_eeprom(struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - void __iomem *ioaddr = ns_ioaddr(dev); - int i; - - writel(EepromReload, ioaddr + PCIBusCfg); - for (i=0;ipci_dev), i*50); - } else if (netif_msg_hw(np)) { - printk(KERN_DEBUG "natsemi %s: EEPROM reloaded in %d usec.\n", - pci_name(np->pci_dev), i*50); - } -} - -static void natsemi_stop_rxtx(struct net_device *dev) -{ - void __iomem * ioaddr = ns_ioaddr(dev); - struct netdev_private *np = netdev_priv(dev); - int i; - - writel(RxOff | TxOff, ioaddr + ChipCmd); - for(i=0;i< NATSEMI_HW_TIMEOUT;i++) { - if ((readl(ioaddr + ChipCmd) & (TxOn|RxOn)) == 0) - break; - udelay(5); - } - if (i==NATSEMI_HW_TIMEOUT) { - printk(KERN_WARNING "%s: Tx/Rx process did not stop in %d usec.\n", - dev->name, i*5); - } else if (netif_msg_hw(np)) { - printk(KERN_DEBUG "%s: Tx/Rx process stopped in %d usec.\n", - dev->name, i*5); - } -} - -static int netdev_open(struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - void __iomem * ioaddr = ns_ioaddr(dev); - int i; - - /* Reset the chip, just in case. */ - natsemi_reset(dev); - - i = request_irq(dev->irq, intr_handler, IRQF_SHARED, dev->name, dev); - if (i) return i; - - if (netif_msg_ifup(np)) - printk(KERN_DEBUG "%s: netdev_open() irq %d.\n", - dev->name, dev->irq); - i = alloc_ring(dev); - if (i < 0) { - free_irq(dev->irq, dev); - return i; - } - napi_enable(&np->napi); - - init_ring(dev); - spin_lock_irq(&np->lock); - init_registers(dev); - /* now set the MAC address according to dev->dev_addr */ - for (i = 0; i < 3; i++) { - u16 mac = (dev->dev_addr[2*i+1]<<8) + dev->dev_addr[2*i]; - - writel(i*2, ioaddr + RxFilterAddr); - writew(mac, ioaddr + RxFilterData); - } - writel(np->cur_rx_mode, ioaddr + RxFilterAddr); - spin_unlock_irq(&np->lock); - - netif_start_queue(dev); - - if (netif_msg_ifup(np)) - printk(KERN_DEBUG "%s: Done netdev_open(), status: %#08x.\n", - dev->name, (int)readl(ioaddr + ChipCmd)); - - /* Set the timer to check for link beat. */ - init_timer(&np->timer); - np->timer.expires = round_jiffies(jiffies + NATSEMI_TIMER_FREQ); - np->timer.data = (unsigned long)dev; - np->timer.function = netdev_timer; /* timer handler */ - add_timer(&np->timer); - - return 0; -} - -static void do_cable_magic(struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - void __iomem *ioaddr = ns_ioaddr(dev); - - if (dev->if_port != PORT_TP) - return; - - if (np->srr >= SRR_DP83816_A5) - return; - - /* - * 100 MBit links with short cables can trip an issue with the chip. - * The problem manifests as lots of CRC errors and/or flickering - * activity LED while idle. This process is based on instructions - * from engineers at National. - */ - if (readl(ioaddr + ChipConfig) & CfgSpeed100) { - u16 data; - - writew(1, ioaddr + PGSEL); - /* - * coefficient visibility should already be enabled via - * DSPCFG | 0x1000 - */ - data = readw(ioaddr + TSTDAT) & 0xff; - /* - * the value must be negative, and within certain values - * (these values all come from National) - */ - if (!(data & 0x80) || ((data >= 0xd8) && (data <= 0xff))) { - np = netdev_priv(dev); - - /* the bug has been triggered - fix the coefficient */ - writew(TSTDAT_FIXED, ioaddr + TSTDAT); - /* lock the value */ - data = readw(ioaddr + DSPCFG); - np->dspcfg = data | DSPCFG_LOCK; - writew(np->dspcfg, ioaddr + DSPCFG); - } - writew(0, ioaddr + PGSEL); - } -} - -static void undo_cable_magic(struct net_device *dev) -{ - u16 data; - struct netdev_private *np = netdev_priv(dev); - void __iomem * ioaddr = ns_ioaddr(dev); - - if (dev->if_port != PORT_TP) - return; - - if (np->srr >= SRR_DP83816_A5) - return; - - writew(1, ioaddr + PGSEL); - /* make sure the lock bit is clear */ - data = readw(ioaddr + DSPCFG); - np->dspcfg = data & ~DSPCFG_LOCK; - writew(np->dspcfg, ioaddr + DSPCFG); - writew(0, ioaddr + PGSEL); -} - -static void check_link(struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - void __iomem * ioaddr = ns_ioaddr(dev); - int duplex = np->duplex; - u16 bmsr; - - /* If we are ignoring the PHY then don't try reading it. */ - if (np->ignore_phy) - goto propagate_state; - - /* The link status field is latched: it remains low after a temporary - * link failure until it's read. We need the current link status, - * thus read twice. - */ - mdio_read(dev, MII_BMSR); - bmsr = mdio_read(dev, MII_BMSR); - - if (!(bmsr & BMSR_LSTATUS)) { - if (netif_carrier_ok(dev)) { - if (netif_msg_link(np)) - printk(KERN_NOTICE "%s: link down.\n", - dev->name); - netif_carrier_off(dev); - undo_cable_magic(dev); - } - return; - } - if (!netif_carrier_ok(dev)) { - if (netif_msg_link(np)) - printk(KERN_NOTICE "%s: link up.\n", dev->name); - netif_carrier_on(dev); - do_cable_magic(dev); - } - - duplex = np->full_duplex; - if (!duplex) { - if (bmsr & BMSR_ANEGCOMPLETE) { - int tmp = mii_nway_result( - np->advertising & mdio_read(dev, MII_LPA)); - if (tmp == LPA_100FULL || tmp == LPA_10FULL) - duplex = 1; - } else if (mdio_read(dev, MII_BMCR) & BMCR_FULLDPLX) - duplex = 1; - } - -propagate_state: - /* if duplex is set then bit 28 must be set, too */ - if (duplex ^ !!(np->rx_config & RxAcceptTx)) { - if (netif_msg_link(np)) - printk(KERN_INFO - "%s: Setting %s-duplex based on negotiated " - "link capability.\n", dev->name, - duplex ? "full" : "half"); - if (duplex) { - np->rx_config |= RxAcceptTx; - np->tx_config |= TxCarrierIgn | TxHeartIgn; - } else { - np->rx_config &= ~RxAcceptTx; - np->tx_config &= ~(TxCarrierIgn | TxHeartIgn); - } - writel(np->tx_config, ioaddr + TxConfig); - writel(np->rx_config, ioaddr + RxConfig); - } -} - -static void init_registers(struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - void __iomem * ioaddr = ns_ioaddr(dev); - - init_phy_fixup(dev); - - /* clear any interrupts that are pending, such as wake events */ - readl(ioaddr + IntrStatus); - - writel(np->ring_dma, ioaddr + RxRingPtr); - writel(np->ring_dma + RX_RING_SIZE * sizeof(struct netdev_desc), - ioaddr + TxRingPtr); - - /* Initialize other registers. - * Configure the PCI bus bursts and FIFO thresholds. - * Configure for standard, in-spec Ethernet. - * Start with half-duplex. check_link will update - * to the correct settings. - */ - - /* DRTH: 2: start tx if 64 bytes are in the fifo - * FLTH: 0x10: refill with next packet if 512 bytes are free - * MXDMA: 0: up to 256 byte bursts. - * MXDMA must be <= FLTH - * ECRETRY=1 - * ATP=1 - */ - np->tx_config = TxAutoPad | TxCollRetry | TxMxdma_256 | - TX_FLTH_VAL | TX_DRTH_VAL_START; - writel(np->tx_config, ioaddr + TxConfig); - - /* DRTH 0x10: start copying to memory if 128 bytes are in the fifo - * MXDMA 0: up to 256 byte bursts - */ - np->rx_config = RxMxdma_256 | RX_DRTH_VAL; - /* if receive ring now has bigger buffers than normal, enable jumbo */ - if (np->rx_buf_sz > NATSEMI_LONGPKT) - np->rx_config |= RxAcceptLong; - - writel(np->rx_config, ioaddr + RxConfig); - - /* Disable PME: - * The PME bit is initialized from the EEPROM contents. - * PCI cards probably have PME disabled, but motherboard - * implementations may have PME set to enable WakeOnLan. - * With PME set the chip will scan incoming packets but - * nothing will be written to memory. */ - np->SavedClkRun = readl(ioaddr + ClkRun); - writel(np->SavedClkRun & ~PMEEnable, ioaddr + ClkRun); - if (np->SavedClkRun & PMEStatus && netif_msg_wol(np)) { - printk(KERN_NOTICE "%s: Wake-up event %#08x\n", - dev->name, readl(ioaddr + WOLCmd)); - } - - check_link(dev); - __set_rx_mode(dev); - - /* Enable interrupts by setting the interrupt mask. */ - writel(DEFAULT_INTR, ioaddr + IntrMask); - natsemi_irq_enable(dev); - - writel(RxOn | TxOn, ioaddr + ChipCmd); - writel(StatsClear, ioaddr + StatsCtrl); /* Clear Stats */ -} - -/* - * netdev_timer: - * Purpose: - * 1) check for link changes. Usually they are handled by the MII interrupt - * but it doesn't hurt to check twice. - * 2) check for sudden death of the NIC: - * It seems that a reference set for this chip went out with incorrect info, - * and there exist boards that aren't quite right. An unexpected voltage - * drop can cause the PHY to get itself in a weird state (basically reset). - * NOTE: this only seems to affect revC chips. The user can disable - * this check via dspcfg_workaround sysfs option. - * 3) check of death of the RX path due to OOM - */ -static void netdev_timer(unsigned long data) -{ - struct net_device *dev = (struct net_device *)data; - struct netdev_private *np = netdev_priv(dev); - void __iomem * ioaddr = ns_ioaddr(dev); - int next_tick = NATSEMI_TIMER_FREQ; - - if (netif_msg_timer(np)) { - /* DO NOT read the IntrStatus register, - * a read clears any pending interrupts. - */ - printk(KERN_DEBUG "%s: Media selection timer tick.\n", - dev->name); - } - - if (dev->if_port == PORT_TP) { - u16 dspcfg; - - spin_lock_irq(&np->lock); - /* check for a nasty random phy-reset - use dspcfg as a flag */ - writew(1, ioaddr+PGSEL); - dspcfg = readw(ioaddr+DSPCFG); - writew(0, ioaddr+PGSEL); - if (np->dspcfg_workaround && dspcfg != np->dspcfg) { - if (!netif_queue_stopped(dev)) { - spin_unlock_irq(&np->lock); - if (netif_msg_drv(np)) - printk(KERN_NOTICE "%s: possible phy reset: " - "re-initializing\n", dev->name); - disable_irq(dev->irq); - spin_lock_irq(&np->lock); - natsemi_stop_rxtx(dev); - dump_ring(dev); - reinit_ring(dev); - init_registers(dev); - spin_unlock_irq(&np->lock); - enable_irq(dev->irq); - } else { - /* hurry back */ - next_tick = HZ; - spin_unlock_irq(&np->lock); - } - } else { - /* init_registers() calls check_link() for the above case */ - check_link(dev); - spin_unlock_irq(&np->lock); - } - } else { - spin_lock_irq(&np->lock); - check_link(dev); - spin_unlock_irq(&np->lock); - } - if (np->oom) { - disable_irq(dev->irq); - np->oom = 0; - refill_rx(dev); - enable_irq(dev->irq); - if (!np->oom) { - writel(RxOn, ioaddr + ChipCmd); - } else { - next_tick = 1; - } - } - - if (next_tick > 1) - mod_timer(&np->timer, round_jiffies(jiffies + next_tick)); - else - mod_timer(&np->timer, jiffies + next_tick); -} - -static void dump_ring(struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - - if (netif_msg_pktdata(np)) { - int i; - printk(KERN_DEBUG " Tx ring at %p:\n", np->tx_ring); - for (i = 0; i < TX_RING_SIZE; i++) { - printk(KERN_DEBUG " #%d desc. %#08x %#08x %#08x.\n", - i, np->tx_ring[i].next_desc, - np->tx_ring[i].cmd_status, - np->tx_ring[i].addr); - } - printk(KERN_DEBUG " Rx ring %p:\n", np->rx_ring); - for (i = 0; i < RX_RING_SIZE; i++) { - printk(KERN_DEBUG " #%d desc. %#08x %#08x %#08x.\n", - i, np->rx_ring[i].next_desc, - np->rx_ring[i].cmd_status, - np->rx_ring[i].addr); - } - } -} - -static void ns_tx_timeout(struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - void __iomem * ioaddr = ns_ioaddr(dev); - - disable_irq(dev->irq); - spin_lock_irq(&np->lock); - if (!np->hands_off) { - if (netif_msg_tx_err(np)) - printk(KERN_WARNING - "%s: Transmit timed out, status %#08x," - " resetting...\n", - dev->name, readl(ioaddr + IntrStatus)); - dump_ring(dev); - - natsemi_reset(dev); - reinit_ring(dev); - init_registers(dev); - } else { - printk(KERN_WARNING - "%s: tx_timeout while in hands_off state?\n", - dev->name); - } - spin_unlock_irq(&np->lock); - enable_irq(dev->irq); - - dev->trans_start = jiffies; /* prevent tx timeout */ - dev->stats.tx_errors++; - netif_wake_queue(dev); -} - -static int alloc_ring(struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - np->rx_ring = pci_alloc_consistent(np->pci_dev, - sizeof(struct netdev_desc) * (RX_RING_SIZE+TX_RING_SIZE), - &np->ring_dma); - if (!np->rx_ring) - return -ENOMEM; - np->tx_ring = &np->rx_ring[RX_RING_SIZE]; - return 0; -} - -static void refill_rx(struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - - /* Refill the Rx ring buffers. */ - for (; np->cur_rx - np->dirty_rx > 0; np->dirty_rx++) { - struct sk_buff *skb; - int entry = np->dirty_rx % RX_RING_SIZE; - if (np->rx_skbuff[entry] == NULL) { - unsigned int buflen = np->rx_buf_sz+NATSEMI_PADDING; - skb = dev_alloc_skb(buflen); - np->rx_skbuff[entry] = skb; - if (skb == NULL) - break; /* Better luck next round. */ - skb->dev = dev; /* Mark as being used by this device. */ - np->rx_dma[entry] = pci_map_single(np->pci_dev, - skb->data, buflen, PCI_DMA_FROMDEVICE); - np->rx_ring[entry].addr = cpu_to_le32(np->rx_dma[entry]); - } - np->rx_ring[entry].cmd_status = cpu_to_le32(np->rx_buf_sz); - } - if (np->cur_rx - np->dirty_rx == RX_RING_SIZE) { - if (netif_msg_rx_err(np)) - printk(KERN_WARNING "%s: going OOM.\n", dev->name); - np->oom = 1; - } -} - -static void set_bufsize(struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - if (dev->mtu <= ETH_DATA_LEN) - np->rx_buf_sz = ETH_DATA_LEN + NATSEMI_HEADERS; - else - np->rx_buf_sz = dev->mtu + NATSEMI_HEADERS; -} - -/* Initialize the Rx and Tx rings, along with various 'dev' bits. */ -static void init_ring(struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - int i; - - /* 1) TX ring */ - np->dirty_tx = np->cur_tx = 0; - for (i = 0; i < TX_RING_SIZE; i++) { - np->tx_skbuff[i] = NULL; - np->tx_ring[i].next_desc = cpu_to_le32(np->ring_dma - +sizeof(struct netdev_desc) - *((i+1)%TX_RING_SIZE+RX_RING_SIZE)); - np->tx_ring[i].cmd_status = 0; - } - - /* 2) RX ring */ - np->dirty_rx = 0; - np->cur_rx = RX_RING_SIZE; - np->oom = 0; - set_bufsize(dev); - - np->rx_head_desc = &np->rx_ring[0]; - - /* Please be careful before changing this loop - at least gcc-2.95.1 - * miscompiles it otherwise. - */ - /* Initialize all Rx descriptors. */ - for (i = 0; i < RX_RING_SIZE; i++) { - np->rx_ring[i].next_desc = cpu_to_le32(np->ring_dma - +sizeof(struct netdev_desc) - *((i+1)%RX_RING_SIZE)); - np->rx_ring[i].cmd_status = cpu_to_le32(DescOwn); - np->rx_skbuff[i] = NULL; - } - refill_rx(dev); - dump_ring(dev); -} - -static void drain_tx(struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - int i; - - for (i = 0; i < TX_RING_SIZE; i++) { - if (np->tx_skbuff[i]) { - pci_unmap_single(np->pci_dev, - np->tx_dma[i], np->tx_skbuff[i]->len, - PCI_DMA_TODEVICE); - dev_kfree_skb(np->tx_skbuff[i]); - dev->stats.tx_dropped++; - } - np->tx_skbuff[i] = NULL; - } -} - -static void drain_rx(struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - unsigned int buflen = np->rx_buf_sz; - int i; - - /* Free all the skbuffs in the Rx queue. */ - for (i = 0; i < RX_RING_SIZE; i++) { - np->rx_ring[i].cmd_status = 0; - np->rx_ring[i].addr = cpu_to_le32(0xBADF00D0); /* An invalid address. */ - if (np->rx_skbuff[i]) { - pci_unmap_single(np->pci_dev, np->rx_dma[i], - buflen + NATSEMI_PADDING, - PCI_DMA_FROMDEVICE); - dev_kfree_skb(np->rx_skbuff[i]); - } - np->rx_skbuff[i] = NULL; - } -} - -static void drain_ring(struct net_device *dev) -{ - drain_rx(dev); - drain_tx(dev); -} - -static void free_ring(struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - pci_free_consistent(np->pci_dev, - sizeof(struct netdev_desc) * (RX_RING_SIZE+TX_RING_SIZE), - np->rx_ring, np->ring_dma); -} - -static void reinit_rx(struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - int i; - - /* RX Ring */ - np->dirty_rx = 0; - np->cur_rx = RX_RING_SIZE; - np->rx_head_desc = &np->rx_ring[0]; - /* Initialize all Rx descriptors. */ - for (i = 0; i < RX_RING_SIZE; i++) - np->rx_ring[i].cmd_status = cpu_to_le32(DescOwn); - - refill_rx(dev); -} - -static void reinit_ring(struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - int i; - - /* drain TX ring */ - drain_tx(dev); - np->dirty_tx = np->cur_tx = 0; - for (i=0;itx_ring[i].cmd_status = 0; - - reinit_rx(dev); -} - -static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - void __iomem * ioaddr = ns_ioaddr(dev); - unsigned entry; - unsigned long flags; - - /* Note: Ordering is important here, set the field with the - "ownership" bit last, and only then increment cur_tx. */ - - /* Calculate the next Tx descriptor entry. */ - entry = np->cur_tx % TX_RING_SIZE; - - np->tx_skbuff[entry] = skb; - np->tx_dma[entry] = pci_map_single(np->pci_dev, - skb->data,skb->len, PCI_DMA_TODEVICE); - - np->tx_ring[entry].addr = cpu_to_le32(np->tx_dma[entry]); - - spin_lock_irqsave(&np->lock, flags); - - if (!np->hands_off) { - np->tx_ring[entry].cmd_status = cpu_to_le32(DescOwn | skb->len); - /* StrongARM: Explicitly cache flush np->tx_ring and - * skb->data,skb->len. */ - wmb(); - np->cur_tx++; - if (np->cur_tx - np->dirty_tx >= TX_QUEUE_LEN - 1) { - netdev_tx_done(dev); - if (np->cur_tx - np->dirty_tx >= TX_QUEUE_LEN - 1) - netif_stop_queue(dev); - } - /* Wake the potentially-idle transmit channel. */ - writel(TxOn, ioaddr + ChipCmd); - } else { - dev_kfree_skb_irq(skb); - dev->stats.tx_dropped++; - } - spin_unlock_irqrestore(&np->lock, flags); - - if (netif_msg_tx_queued(np)) { - printk(KERN_DEBUG "%s: Transmit frame #%d queued in slot %d.\n", - dev->name, np->cur_tx, entry); - } - return NETDEV_TX_OK; -} - -static void netdev_tx_done(struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - - for (; np->cur_tx - np->dirty_tx > 0; np->dirty_tx++) { - int entry = np->dirty_tx % TX_RING_SIZE; - if (np->tx_ring[entry].cmd_status & cpu_to_le32(DescOwn)) - break; - if (netif_msg_tx_done(np)) - printk(KERN_DEBUG - "%s: tx frame #%d finished, status %#08x.\n", - dev->name, np->dirty_tx, - le32_to_cpu(np->tx_ring[entry].cmd_status)); - if (np->tx_ring[entry].cmd_status & cpu_to_le32(DescPktOK)) { - dev->stats.tx_packets++; - dev->stats.tx_bytes += np->tx_skbuff[entry]->len; - } else { /* Various Tx errors */ - int tx_status = - le32_to_cpu(np->tx_ring[entry].cmd_status); - if (tx_status & (DescTxAbort|DescTxExcColl)) - dev->stats.tx_aborted_errors++; - if (tx_status & DescTxFIFO) - dev->stats.tx_fifo_errors++; - if (tx_status & DescTxCarrier) - dev->stats.tx_carrier_errors++; - if (tx_status & DescTxOOWCol) - dev->stats.tx_window_errors++; - dev->stats.tx_errors++; - } - pci_unmap_single(np->pci_dev,np->tx_dma[entry], - np->tx_skbuff[entry]->len, - PCI_DMA_TODEVICE); - /* Free the original skb. */ - dev_kfree_skb_irq(np->tx_skbuff[entry]); - np->tx_skbuff[entry] = NULL; - } - if (netif_queue_stopped(dev) && - np->cur_tx - np->dirty_tx < TX_QUEUE_LEN - 4) { - /* The ring is no longer full, wake queue. */ - netif_wake_queue(dev); - } -} - -/* The interrupt handler doesn't actually handle interrupts itself, it - * schedules a NAPI poll if there is anything to do. */ -static irqreturn_t intr_handler(int irq, void *dev_instance) -{ - struct net_device *dev = dev_instance; - struct netdev_private *np = netdev_priv(dev); - void __iomem * ioaddr = ns_ioaddr(dev); - - /* Reading IntrStatus automatically acknowledges so don't do - * that while interrupts are disabled, (for example, while a - * poll is scheduled). */ - if (np->hands_off || !readl(ioaddr + IntrEnable)) - return IRQ_NONE; - - np->intr_status = readl(ioaddr + IntrStatus); - - if (!np->intr_status) - return IRQ_NONE; - - if (netif_msg_intr(np)) - printk(KERN_DEBUG - "%s: Interrupt, status %#08x, mask %#08x.\n", - dev->name, np->intr_status, - readl(ioaddr + IntrMask)); - - prefetch(&np->rx_skbuff[np->cur_rx % RX_RING_SIZE]); - - if (napi_schedule_prep(&np->napi)) { - /* Disable interrupts and register for poll */ - natsemi_irq_disable(dev); - __napi_schedule(&np->napi); - } else - printk(KERN_WARNING - "%s: Ignoring interrupt, status %#08x, mask %#08x.\n", - dev->name, np->intr_status, - readl(ioaddr + IntrMask)); - - return IRQ_HANDLED; -} - -/* This is the NAPI poll routine. As well as the standard RX handling - * it also handles all other interrupts that the chip might raise. - */ -static int natsemi_poll(struct napi_struct *napi, int budget) -{ - struct netdev_private *np = container_of(napi, struct netdev_private, napi); - struct net_device *dev = np->dev; - void __iomem * ioaddr = ns_ioaddr(dev); - int work_done = 0; - - do { - if (netif_msg_intr(np)) - printk(KERN_DEBUG - "%s: Poll, status %#08x, mask %#08x.\n", - dev->name, np->intr_status, - readl(ioaddr + IntrMask)); - - /* netdev_rx() may read IntrStatus again if the RX state - * machine falls over so do it first. */ - if (np->intr_status & - (IntrRxDone | IntrRxIntr | RxStatusFIFOOver | - IntrRxErr | IntrRxOverrun)) { - netdev_rx(dev, &work_done, budget); - } - - if (np->intr_status & - (IntrTxDone | IntrTxIntr | IntrTxIdle | IntrTxErr)) { - spin_lock(&np->lock); - netdev_tx_done(dev); - spin_unlock(&np->lock); - } - - /* Abnormal error summary/uncommon events handlers. */ - if (np->intr_status & IntrAbnormalSummary) - netdev_error(dev, np->intr_status); - - if (work_done >= budget) - return work_done; - - np->intr_status = readl(ioaddr + IntrStatus); - } while (np->intr_status); - - napi_complete(napi); - - /* Reenable interrupts providing nothing is trying to shut - * the chip down. */ - spin_lock(&np->lock); - if (!np->hands_off) - natsemi_irq_enable(dev); - spin_unlock(&np->lock); - - return work_done; -} - -/* This routine is logically part of the interrupt handler, but separated - for clarity and better register allocation. */ -static void netdev_rx(struct net_device *dev, int *work_done, int work_to_do) -{ - struct netdev_private *np = netdev_priv(dev); - int entry = np->cur_rx % RX_RING_SIZE; - int boguscnt = np->dirty_rx + RX_RING_SIZE - np->cur_rx; - s32 desc_status = le32_to_cpu(np->rx_head_desc->cmd_status); - unsigned int buflen = np->rx_buf_sz; - void __iomem * ioaddr = ns_ioaddr(dev); - - /* If the driver owns the next entry it's a new packet. Send it up. */ - while (desc_status < 0) { /* e.g. & DescOwn */ - int pkt_len; - if (netif_msg_rx_status(np)) - printk(KERN_DEBUG - " netdev_rx() entry %d status was %#08x.\n", - entry, desc_status); - if (--boguscnt < 0) - break; - - if (*work_done >= work_to_do) - break; - - (*work_done)++; - - pkt_len = (desc_status & DescSizeMask) - 4; - if ((desc_status&(DescMore|DescPktOK|DescRxLong)) != DescPktOK){ - if (desc_status & DescMore) { - unsigned long flags; - - if (netif_msg_rx_err(np)) - printk(KERN_WARNING - "%s: Oversized(?) Ethernet " - "frame spanned multiple " - "buffers, entry %#08x " - "status %#08x.\n", dev->name, - np->cur_rx, desc_status); - dev->stats.rx_length_errors++; - - /* The RX state machine has probably - * locked up beneath us. Follow the - * reset procedure documented in - * AN-1287. */ - - spin_lock_irqsave(&np->lock, flags); - reset_rx(dev); - reinit_rx(dev); - writel(np->ring_dma, ioaddr + RxRingPtr); - check_link(dev); - spin_unlock_irqrestore(&np->lock, flags); - - /* We'll enable RX on exit from this - * function. */ - break; - - } else { - /* There was an error. */ - dev->stats.rx_errors++; - if (desc_status & (DescRxAbort|DescRxOver)) - dev->stats.rx_over_errors++; - if (desc_status & (DescRxLong|DescRxRunt)) - dev->stats.rx_length_errors++; - if (desc_status & (DescRxInvalid|DescRxAlign)) - dev->stats.rx_frame_errors++; - if (desc_status & DescRxCRC) - dev->stats.rx_crc_errors++; - } - } else if (pkt_len > np->rx_buf_sz) { - /* if this is the tail of a double buffer - * packet, we've already counted the error - * on the first part. Ignore the second half. - */ - } else { - struct sk_buff *skb; - /* Omit CRC size. */ - /* Check if the packet is long enough to accept - * without copying to a minimally-sized skbuff. */ - if (pkt_len < rx_copybreak && - (skb = dev_alloc_skb(pkt_len + RX_OFFSET)) != NULL) { - /* 16 byte align the IP header */ - skb_reserve(skb, RX_OFFSET); - pci_dma_sync_single_for_cpu(np->pci_dev, - np->rx_dma[entry], - buflen, - PCI_DMA_FROMDEVICE); - skb_copy_to_linear_data(skb, - np->rx_skbuff[entry]->data, pkt_len); - skb_put(skb, pkt_len); - pci_dma_sync_single_for_device(np->pci_dev, - np->rx_dma[entry], - buflen, - PCI_DMA_FROMDEVICE); - } else { - pci_unmap_single(np->pci_dev, np->rx_dma[entry], - buflen + NATSEMI_PADDING, - PCI_DMA_FROMDEVICE); - skb_put(skb = np->rx_skbuff[entry], pkt_len); - np->rx_skbuff[entry] = NULL; - } - skb->protocol = eth_type_trans(skb, dev); - netif_receive_skb(skb); - dev->stats.rx_packets++; - dev->stats.rx_bytes += pkt_len; - } - entry = (++np->cur_rx) % RX_RING_SIZE; - np->rx_head_desc = &np->rx_ring[entry]; - desc_status = le32_to_cpu(np->rx_head_desc->cmd_status); - } - refill_rx(dev); - - /* Restart Rx engine if stopped. */ - if (np->oom) - mod_timer(&np->timer, jiffies + 1); - else - writel(RxOn, ioaddr + ChipCmd); -} - -static void netdev_error(struct net_device *dev, int intr_status) -{ - struct netdev_private *np = netdev_priv(dev); - void __iomem * ioaddr = ns_ioaddr(dev); - - spin_lock(&np->lock); - if (intr_status & LinkChange) { - u16 lpa = mdio_read(dev, MII_LPA); - if (mdio_read(dev, MII_BMCR) & BMCR_ANENABLE && - netif_msg_link(np)) { - printk(KERN_INFO - "%s: Autonegotiation advertising" - " %#04x partner %#04x.\n", dev->name, - np->advertising, lpa); - } - - /* read MII int status to clear the flag */ - readw(ioaddr + MIntrStatus); - check_link(dev); - } - if (intr_status & StatsMax) { - __get_stats(dev); - } - if (intr_status & IntrTxUnderrun) { - if ((np->tx_config & TxDrthMask) < TX_DRTH_VAL_LIMIT) { - np->tx_config += TX_DRTH_VAL_INC; - if (netif_msg_tx_err(np)) - printk(KERN_NOTICE - "%s: increased tx threshold, txcfg %#08x.\n", - dev->name, np->tx_config); - } else { - if (netif_msg_tx_err(np)) - printk(KERN_NOTICE - "%s: tx underrun with maximum tx threshold, txcfg %#08x.\n", - dev->name, np->tx_config); - } - writel(np->tx_config, ioaddr + TxConfig); - } - if (intr_status & WOLPkt && netif_msg_wol(np)) { - int wol_status = readl(ioaddr + WOLCmd); - printk(KERN_NOTICE "%s: Link wake-up event %#08x\n", - dev->name, wol_status); - } - if (intr_status & RxStatusFIFOOver) { - if (netif_msg_rx_err(np) && netif_msg_intr(np)) { - printk(KERN_NOTICE "%s: Rx status FIFO overrun\n", - dev->name); - } - dev->stats.rx_fifo_errors++; - dev->stats.rx_errors++; - } - /* Hmmmmm, it's not clear how to recover from PCI faults. */ - if (intr_status & IntrPCIErr) { - printk(KERN_NOTICE "%s: PCI error %#08x\n", dev->name, - intr_status & IntrPCIErr); - dev->stats.tx_fifo_errors++; - dev->stats.tx_errors++; - dev->stats.rx_fifo_errors++; - dev->stats.rx_errors++; - } - spin_unlock(&np->lock); -} - -static void __get_stats(struct net_device *dev) -{ - void __iomem * ioaddr = ns_ioaddr(dev); - - /* The chip only need report frame silently dropped. */ - dev->stats.rx_crc_errors += readl(ioaddr + RxCRCErrs); - dev->stats.rx_missed_errors += readl(ioaddr + RxMissed); -} - -static struct net_device_stats *get_stats(struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - - /* The chip only need report frame silently dropped. */ - spin_lock_irq(&np->lock); - if (netif_running(dev) && !np->hands_off) - __get_stats(dev); - spin_unlock_irq(&np->lock); - - return &dev->stats; -} - -#ifdef CONFIG_NET_POLL_CONTROLLER -static void natsemi_poll_controller(struct net_device *dev) -{ - disable_irq(dev->irq); - intr_handler(dev->irq, dev); - enable_irq(dev->irq); -} -#endif - -#define HASH_TABLE 0x200 -static void __set_rx_mode(struct net_device *dev) -{ - void __iomem * ioaddr = ns_ioaddr(dev); - struct netdev_private *np = netdev_priv(dev); - u8 mc_filter[64]; /* Multicast hash filter */ - u32 rx_mode; - - if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */ - rx_mode = RxFilterEnable | AcceptBroadcast - | AcceptAllMulticast | AcceptAllPhys | AcceptMyPhys; - } else if ((netdev_mc_count(dev) > multicast_filter_limit) || - (dev->flags & IFF_ALLMULTI)) { - rx_mode = RxFilterEnable | AcceptBroadcast - | AcceptAllMulticast | AcceptMyPhys; - } else { - struct netdev_hw_addr *ha; - int i; - - memset(mc_filter, 0, sizeof(mc_filter)); - netdev_for_each_mc_addr(ha, dev) { - int b = (ether_crc(ETH_ALEN, ha->addr) >> 23) & 0x1ff; - mc_filter[b/8] |= (1 << (b & 0x07)); - } - rx_mode = RxFilterEnable | AcceptBroadcast - | AcceptMulticast | AcceptMyPhys; - for (i = 0; i < 64; i += 2) { - writel(HASH_TABLE + i, ioaddr + RxFilterAddr); - writel((mc_filter[i + 1] << 8) + mc_filter[i], - ioaddr + RxFilterData); - } - } - writel(rx_mode, ioaddr + RxFilterAddr); - np->cur_rx_mode = rx_mode; -} - -static int natsemi_change_mtu(struct net_device *dev, int new_mtu) -{ - if (new_mtu < 64 || new_mtu > NATSEMI_RX_LIMIT-NATSEMI_HEADERS) - return -EINVAL; - - dev->mtu = new_mtu; - - /* synchronized against open : rtnl_lock() held by caller */ - if (netif_running(dev)) { - struct netdev_private *np = netdev_priv(dev); - void __iomem * ioaddr = ns_ioaddr(dev); - - disable_irq(dev->irq); - spin_lock(&np->lock); - /* stop engines */ - natsemi_stop_rxtx(dev); - /* drain rx queue */ - drain_rx(dev); - /* change buffers */ - set_bufsize(dev); - reinit_rx(dev); - writel(np->ring_dma, ioaddr + RxRingPtr); - /* restart engines */ - writel(RxOn | TxOn, ioaddr + ChipCmd); - spin_unlock(&np->lock); - enable_irq(dev->irq); - } - return 0; -} - -static void set_rx_mode(struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - spin_lock_irq(&np->lock); - if (!np->hands_off) - __set_rx_mode(dev); - spin_unlock_irq(&np->lock); -} - -static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) -{ - struct netdev_private *np = netdev_priv(dev); - strncpy(info->driver, DRV_NAME, ETHTOOL_BUSINFO_LEN); - strncpy(info->version, DRV_VERSION, ETHTOOL_BUSINFO_LEN); - strncpy(info->bus_info, pci_name(np->pci_dev), ETHTOOL_BUSINFO_LEN); -} - -static int get_regs_len(struct net_device *dev) -{ - return NATSEMI_REGS_SIZE; -} - -static int get_eeprom_len(struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - return np->eeprom_size; -} - -static int get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) -{ - struct netdev_private *np = netdev_priv(dev); - spin_lock_irq(&np->lock); - netdev_get_ecmd(dev, ecmd); - spin_unlock_irq(&np->lock); - return 0; -} - -static int set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) -{ - struct netdev_private *np = netdev_priv(dev); - int res; - spin_lock_irq(&np->lock); - res = netdev_set_ecmd(dev, ecmd); - spin_unlock_irq(&np->lock); - return res; -} - -static void get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) -{ - struct netdev_private *np = netdev_priv(dev); - spin_lock_irq(&np->lock); - netdev_get_wol(dev, &wol->supported, &wol->wolopts); - netdev_get_sopass(dev, wol->sopass); - spin_unlock_irq(&np->lock); -} - -static int set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) -{ - struct netdev_private *np = netdev_priv(dev); - int res; - spin_lock_irq(&np->lock); - netdev_set_wol(dev, wol->wolopts); - res = netdev_set_sopass(dev, wol->sopass); - spin_unlock_irq(&np->lock); - return res; -} - -static void get_regs(struct net_device *dev, struct ethtool_regs *regs, void *buf) -{ - struct netdev_private *np = netdev_priv(dev); - regs->version = NATSEMI_REGS_VER; - spin_lock_irq(&np->lock); - netdev_get_regs(dev, buf); - spin_unlock_irq(&np->lock); -} - -static u32 get_msglevel(struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - return np->msg_enable; -} - -static void set_msglevel(struct net_device *dev, u32 val) -{ - struct netdev_private *np = netdev_priv(dev); - np->msg_enable = val; -} - -static int nway_reset(struct net_device *dev) -{ - int tmp; - int r = -EINVAL; - /* if autoneg is off, it's an error */ - tmp = mdio_read(dev, MII_BMCR); - if (tmp & BMCR_ANENABLE) { - tmp |= (BMCR_ANRESTART); - mdio_write(dev, MII_BMCR, tmp); - r = 0; - } - return r; -} - -static u32 get_link(struct net_device *dev) -{ - /* LSTATUS is latched low until a read - so read twice */ - mdio_read(dev, MII_BMSR); - return (mdio_read(dev, MII_BMSR)&BMSR_LSTATUS) ? 1:0; -} - -static int get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, u8 *data) -{ - struct netdev_private *np = netdev_priv(dev); - u8 *eebuf; - int res; - - eebuf = kmalloc(np->eeprom_size, GFP_KERNEL); - if (!eebuf) - return -ENOMEM; - - eeprom->magic = PCI_VENDOR_ID_NS | (PCI_DEVICE_ID_NS_83815<<16); - spin_lock_irq(&np->lock); - res = netdev_get_eeprom(dev, eebuf); - spin_unlock_irq(&np->lock); - if (!res) - memcpy(data, eebuf+eeprom->offset, eeprom->len); - kfree(eebuf); - return res; -} - -static const struct ethtool_ops ethtool_ops = { - .get_drvinfo = get_drvinfo, - .get_regs_len = get_regs_len, - .get_eeprom_len = get_eeprom_len, - .get_settings = get_settings, - .set_settings = set_settings, - .get_wol = get_wol, - .set_wol = set_wol, - .get_regs = get_regs, - .get_msglevel = get_msglevel, - .set_msglevel = set_msglevel, - .nway_reset = nway_reset, - .get_link = get_link, - .get_eeprom = get_eeprom, -}; - -static int netdev_set_wol(struct net_device *dev, u32 newval) -{ - struct netdev_private *np = netdev_priv(dev); - void __iomem * ioaddr = ns_ioaddr(dev); - u32 data = readl(ioaddr + WOLCmd) & ~WakeOptsSummary; - - /* translate to bitmasks this chip understands */ - if (newval & WAKE_PHY) - data |= WakePhy; - if (newval & WAKE_UCAST) - data |= WakeUnicast; - if (newval & WAKE_MCAST) - data |= WakeMulticast; - if (newval & WAKE_BCAST) - data |= WakeBroadcast; - if (newval & WAKE_ARP) - data |= WakeArp; - if (newval & WAKE_MAGIC) - data |= WakeMagic; - if (np->srr >= SRR_DP83815_D) { - if (newval & WAKE_MAGICSECURE) { - data |= WakeMagicSecure; - } - } - - writel(data, ioaddr + WOLCmd); - - return 0; -} - -static int netdev_get_wol(struct net_device *dev, u32 *supported, u32 *cur) -{ - struct netdev_private *np = netdev_priv(dev); - void __iomem * ioaddr = ns_ioaddr(dev); - u32 regval = readl(ioaddr + WOLCmd); - - *supported = (WAKE_PHY | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST - | WAKE_ARP | WAKE_MAGIC); - - if (np->srr >= SRR_DP83815_D) { - /* SOPASS works on revD and higher */ - *supported |= WAKE_MAGICSECURE; - } - *cur = 0; - - /* translate from chip bitmasks */ - if (regval & WakePhy) - *cur |= WAKE_PHY; - if (regval & WakeUnicast) - *cur |= WAKE_UCAST; - if (regval & WakeMulticast) - *cur |= WAKE_MCAST; - if (regval & WakeBroadcast) - *cur |= WAKE_BCAST; - if (regval & WakeArp) - *cur |= WAKE_ARP; - if (regval & WakeMagic) - *cur |= WAKE_MAGIC; - if (regval & WakeMagicSecure) { - /* this can be on in revC, but it's broken */ - *cur |= WAKE_MAGICSECURE; - } - - return 0; -} - -static int netdev_set_sopass(struct net_device *dev, u8 *newval) -{ - struct netdev_private *np = netdev_priv(dev); - void __iomem * ioaddr = ns_ioaddr(dev); - u16 *sval = (u16 *)newval; - u32 addr; - - if (np->srr < SRR_DP83815_D) { - return 0; - } - - /* enable writing to these registers by disabling the RX filter */ - addr = readl(ioaddr + RxFilterAddr) & ~RFCRAddressMask; - addr &= ~RxFilterEnable; - writel(addr, ioaddr + RxFilterAddr); - - /* write the three words to (undocumented) RFCR vals 0xa, 0xc, 0xe */ - writel(addr | 0xa, ioaddr + RxFilterAddr); - writew(sval[0], ioaddr + RxFilterData); - - writel(addr | 0xc, ioaddr + RxFilterAddr); - writew(sval[1], ioaddr + RxFilterData); - - writel(addr | 0xe, ioaddr + RxFilterAddr); - writew(sval[2], ioaddr + RxFilterData); - - /* re-enable the RX filter */ - writel(addr | RxFilterEnable, ioaddr + RxFilterAddr); - - return 0; -} - -static int netdev_get_sopass(struct net_device *dev, u8 *data) -{ - struct netdev_private *np = netdev_priv(dev); - void __iomem * ioaddr = ns_ioaddr(dev); - u16 *sval = (u16 *)data; - u32 addr; - - if (np->srr < SRR_DP83815_D) { - sval[0] = sval[1] = sval[2] = 0; - return 0; - } - - /* read the three words from (undocumented) RFCR vals 0xa, 0xc, 0xe */ - addr = readl(ioaddr + RxFilterAddr) & ~RFCRAddressMask; - - writel(addr | 0xa, ioaddr + RxFilterAddr); - sval[0] = readw(ioaddr + RxFilterData); - - writel(addr | 0xc, ioaddr + RxFilterAddr); - sval[1] = readw(ioaddr + RxFilterData); - - writel(addr | 0xe, ioaddr + RxFilterAddr); - sval[2] = readw(ioaddr + RxFilterData); - - writel(addr, ioaddr + RxFilterAddr); - - return 0; -} - -static int netdev_get_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd) -{ - struct netdev_private *np = netdev_priv(dev); - u32 tmp; - - ecmd->port = dev->if_port; - ethtool_cmd_speed_set(ecmd, np->speed); - ecmd->duplex = np->duplex; - ecmd->autoneg = np->autoneg; - ecmd->advertising = 0; - if (np->advertising & ADVERTISE_10HALF) - ecmd->advertising |= ADVERTISED_10baseT_Half; - if (np->advertising & ADVERTISE_10FULL) - ecmd->advertising |= ADVERTISED_10baseT_Full; - if (np->advertising & ADVERTISE_100HALF) - ecmd->advertising |= ADVERTISED_100baseT_Half; - if (np->advertising & ADVERTISE_100FULL) - ecmd->advertising |= ADVERTISED_100baseT_Full; - ecmd->supported = (SUPPORTED_Autoneg | - SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | - SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | - SUPPORTED_TP | SUPPORTED_MII | SUPPORTED_FIBRE); - ecmd->phy_address = np->phy_addr_external; - /* - * We intentionally report the phy address of the external - * phy, even if the internal phy is used. This is necessary - * to work around a deficiency of the ethtool interface: - * It's only possible to query the settings of the active - * port. Therefore - * # ethtool -s ethX port mii - * actually sends an ioctl to switch to port mii with the - * settings that are used for the current active port. - * If we would report a different phy address in this - * command, then - * # ethtool -s ethX port tp;ethtool -s ethX port mii - * would unintentionally change the phy address. - * - * Fortunately the phy address doesn't matter with the - * internal phy... - */ - - /* set information based on active port type */ - switch (ecmd->port) { - default: - case PORT_TP: - ecmd->advertising |= ADVERTISED_TP; - ecmd->transceiver = XCVR_INTERNAL; - break; - case PORT_MII: - ecmd->advertising |= ADVERTISED_MII; - ecmd->transceiver = XCVR_EXTERNAL; - break; - case PORT_FIBRE: - ecmd->advertising |= ADVERTISED_FIBRE; - ecmd->transceiver = XCVR_EXTERNAL; - break; - } - - /* if autonegotiation is on, try to return the active speed/duplex */ - if (ecmd->autoneg == AUTONEG_ENABLE) { - ecmd->advertising |= ADVERTISED_Autoneg; - tmp = mii_nway_result( - np->advertising & mdio_read(dev, MII_LPA)); - if (tmp == LPA_100FULL || tmp == LPA_100HALF) - ethtool_cmd_speed_set(ecmd, SPEED_100); - else - ethtool_cmd_speed_set(ecmd, SPEED_10); - if (tmp == LPA_100FULL || tmp == LPA_10FULL) - ecmd->duplex = DUPLEX_FULL; - else - ecmd->duplex = DUPLEX_HALF; - } - - /* ignore maxtxpkt, maxrxpkt for now */ - - return 0; -} - -static int netdev_set_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd) -{ - struct netdev_private *np = netdev_priv(dev); - - if (ecmd->port != PORT_TP && ecmd->port != PORT_MII && ecmd->port != PORT_FIBRE) - return -EINVAL; - if (ecmd->transceiver != XCVR_INTERNAL && ecmd->transceiver != XCVR_EXTERNAL) - return -EINVAL; - if (ecmd->autoneg == AUTONEG_ENABLE) { - if ((ecmd->advertising & (ADVERTISED_10baseT_Half | - ADVERTISED_10baseT_Full | - ADVERTISED_100baseT_Half | - ADVERTISED_100baseT_Full)) == 0) { - return -EINVAL; - } - } else if (ecmd->autoneg == AUTONEG_DISABLE) { - u32 speed = ethtool_cmd_speed(ecmd); - if (speed != SPEED_10 && speed != SPEED_100) - return -EINVAL; - if (ecmd->duplex != DUPLEX_HALF && ecmd->duplex != DUPLEX_FULL) - return -EINVAL; - } else { - return -EINVAL; - } - - /* - * If we're ignoring the PHY then autoneg and the internal - * transceiver are really not going to work so don't let the - * user select them. - */ - if (np->ignore_phy && (ecmd->autoneg == AUTONEG_ENABLE || - ecmd->port == PORT_TP)) - return -EINVAL; - - /* - * maxtxpkt, maxrxpkt: ignored for now. - * - * transceiver: - * PORT_TP is always XCVR_INTERNAL, PORT_MII and PORT_FIBRE are always - * XCVR_EXTERNAL. The implementation thus ignores ecmd->transceiver and - * selects based on ecmd->port. - * - * Actually PORT_FIBRE is nearly identical to PORT_MII: it's for fibre - * phys that are connected to the mii bus. It's used to apply fibre - * specific updates. - */ - - /* WHEW! now lets bang some bits */ - - /* save the parms */ - dev->if_port = ecmd->port; - np->autoneg = ecmd->autoneg; - np->phy_addr_external = ecmd->phy_address & PhyAddrMask; - if (np->autoneg == AUTONEG_ENABLE) { - /* advertise only what has been requested */ - np->advertising &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4); - if (ecmd->advertising & ADVERTISED_10baseT_Half) - np->advertising |= ADVERTISE_10HALF; - if (ecmd->advertising & ADVERTISED_10baseT_Full) - np->advertising |= ADVERTISE_10FULL; - if (ecmd->advertising & ADVERTISED_100baseT_Half) - np->advertising |= ADVERTISE_100HALF; - if (ecmd->advertising & ADVERTISED_100baseT_Full) - np->advertising |= ADVERTISE_100FULL; - } else { - np->speed = ethtool_cmd_speed(ecmd); - np->duplex = ecmd->duplex; - /* user overriding the initial full duplex parm? */ - if (np->duplex == DUPLEX_HALF) - np->full_duplex = 0; - } - - /* get the right phy enabled */ - if (ecmd->port == PORT_TP) - switch_port_internal(dev); - else - switch_port_external(dev); - - /* set parms and see how this affected our link status */ - init_phy_fixup(dev); - check_link(dev); - return 0; -} - -static int netdev_get_regs(struct net_device *dev, u8 *buf) -{ - int i; - int j; - u32 rfcr; - u32 *rbuf = (u32 *)buf; - void __iomem * ioaddr = ns_ioaddr(dev); - - /* read non-mii page 0 of registers */ - for (i = 0; i < NATSEMI_PG0_NREGS/2; i++) { - rbuf[i] = readl(ioaddr + i*4); - } - - /* read current mii registers */ - for (i = NATSEMI_PG0_NREGS/2; i < NATSEMI_PG0_NREGS; i++) - rbuf[i] = mdio_read(dev, i & 0x1f); - - /* read only the 'magic' registers from page 1 */ - writew(1, ioaddr + PGSEL); - rbuf[i++] = readw(ioaddr + PMDCSR); - rbuf[i++] = readw(ioaddr + TSTDAT); - rbuf[i++] = readw(ioaddr + DSPCFG); - rbuf[i++] = readw(ioaddr + SDCFG); - writew(0, ioaddr + PGSEL); - - /* read RFCR indexed registers */ - rfcr = readl(ioaddr + RxFilterAddr); - for (j = 0; j < NATSEMI_RFDR_NREGS; j++) { - writel(j*2, ioaddr + RxFilterAddr); - rbuf[i++] = readw(ioaddr + RxFilterData); - } - writel(rfcr, ioaddr + RxFilterAddr); - - /* the interrupt status is clear-on-read - see if we missed any */ - if (rbuf[4] & rbuf[5]) { - printk(KERN_WARNING - "%s: shoot, we dropped an interrupt (%#08x)\n", - dev->name, rbuf[4] & rbuf[5]); - } - - return 0; -} - -#define SWAP_BITS(x) ( (((x) & 0x0001) << 15) | (((x) & 0x0002) << 13) \ - | (((x) & 0x0004) << 11) | (((x) & 0x0008) << 9) \ - | (((x) & 0x0010) << 7) | (((x) & 0x0020) << 5) \ - | (((x) & 0x0040) << 3) | (((x) & 0x0080) << 1) \ - | (((x) & 0x0100) >> 1) | (((x) & 0x0200) >> 3) \ - | (((x) & 0x0400) >> 5) | (((x) & 0x0800) >> 7) \ - | (((x) & 0x1000) >> 9) | (((x) & 0x2000) >> 11) \ - | (((x) & 0x4000) >> 13) | (((x) & 0x8000) >> 15) ) - -static int netdev_get_eeprom(struct net_device *dev, u8 *buf) -{ - int i; - u16 *ebuf = (u16 *)buf; - void __iomem * ioaddr = ns_ioaddr(dev); - struct netdev_private *np = netdev_priv(dev); - - /* eeprom_read reads 16 bits, and indexes by 16 bits */ - for (i = 0; i < np->eeprom_size/2; i++) { - ebuf[i] = eeprom_read(ioaddr, i); - /* The EEPROM itself stores data bit-swapped, but eeprom_read - * reads it back "sanely". So we swap it back here in order to - * present it to userland as it is stored. */ - ebuf[i] = SWAP_BITS(ebuf[i]); - } - return 0; -} - -static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) -{ - struct mii_ioctl_data *data = if_mii(rq); - struct netdev_private *np = netdev_priv(dev); - - switch(cmd) { - case SIOCGMIIPHY: /* Get address of MII PHY in use. */ - data->phy_id = np->phy_addr_external; - /* Fall Through */ - - case SIOCGMIIREG: /* Read MII PHY register. */ - /* The phy_id is not enough to uniquely identify - * the intended target. Therefore the command is sent to - * the given mii on the current port. - */ - if (dev->if_port == PORT_TP) { - if ((data->phy_id & 0x1f) == np->phy_addr_external) - data->val_out = mdio_read(dev, - data->reg_num & 0x1f); - else - data->val_out = 0; - } else { - move_int_phy(dev, data->phy_id & 0x1f); - data->val_out = miiport_read(dev, data->phy_id & 0x1f, - data->reg_num & 0x1f); - } - return 0; - - case SIOCSMIIREG: /* Write MII PHY register. */ - if (dev->if_port == PORT_TP) { - if ((data->phy_id & 0x1f) == np->phy_addr_external) { - if ((data->reg_num & 0x1f) == MII_ADVERTISE) - np->advertising = data->val_in; - mdio_write(dev, data->reg_num & 0x1f, - data->val_in); - } - } else { - if ((data->phy_id & 0x1f) == np->phy_addr_external) { - if ((data->reg_num & 0x1f) == MII_ADVERTISE) - np->advertising = data->val_in; - } - move_int_phy(dev, data->phy_id & 0x1f); - miiport_write(dev, data->phy_id & 0x1f, - data->reg_num & 0x1f, - data->val_in); - } - return 0; - default: - return -EOPNOTSUPP; - } -} - -static void enable_wol_mode(struct net_device *dev, int enable_intr) -{ - void __iomem * ioaddr = ns_ioaddr(dev); - struct netdev_private *np = netdev_priv(dev); - - if (netif_msg_wol(np)) - printk(KERN_INFO "%s: remaining active for wake-on-lan\n", - dev->name); - - /* For WOL we must restart the rx process in silent mode. - * Write NULL to the RxRingPtr. Only possible if - * rx process is stopped - */ - writel(0, ioaddr + RxRingPtr); - - /* read WoL status to clear */ - readl(ioaddr + WOLCmd); - - /* PME on, clear status */ - writel(np->SavedClkRun | PMEEnable | PMEStatus, ioaddr + ClkRun); - - /* and restart the rx process */ - writel(RxOn, ioaddr + ChipCmd); - - if (enable_intr) { - /* enable the WOL interrupt. - * Could be used to send a netlink message. - */ - writel(WOLPkt | LinkChange, ioaddr + IntrMask); - natsemi_irq_enable(dev); - } -} - -static int netdev_close(struct net_device *dev) -{ - void __iomem * ioaddr = ns_ioaddr(dev); - struct netdev_private *np = netdev_priv(dev); - - if (netif_msg_ifdown(np)) - printk(KERN_DEBUG - "%s: Shutting down ethercard, status was %#04x.\n", - dev->name, (int)readl(ioaddr + ChipCmd)); - if (netif_msg_pktdata(np)) - printk(KERN_DEBUG - "%s: Queue pointers were Tx %d / %d, Rx %d / %d.\n", - dev->name, np->cur_tx, np->dirty_tx, - np->cur_rx, np->dirty_rx); - - napi_disable(&np->napi); - - /* - * FIXME: what if someone tries to close a device - * that is suspended? - * Should we reenable the nic to switch to - * the final WOL settings? - */ - - del_timer_sync(&np->timer); - disable_irq(dev->irq); - spin_lock_irq(&np->lock); - natsemi_irq_disable(dev); - np->hands_off = 1; - spin_unlock_irq(&np->lock); - enable_irq(dev->irq); - - free_irq(dev->irq, dev); - - /* Interrupt disabled, interrupt handler released, - * queue stopped, timer deleted, rtnl_lock held - * All async codepaths that access the driver are disabled. - */ - spin_lock_irq(&np->lock); - np->hands_off = 0; - readl(ioaddr + IntrMask); - readw(ioaddr + MIntrStatus); - - /* Freeze Stats */ - writel(StatsFreeze, ioaddr + StatsCtrl); - - /* Stop the chip's Tx and Rx processes. */ - natsemi_stop_rxtx(dev); - - __get_stats(dev); - spin_unlock_irq(&np->lock); - - /* clear the carrier last - an interrupt could reenable it otherwise */ - netif_carrier_off(dev); - netif_stop_queue(dev); - - dump_ring(dev); - drain_ring(dev); - free_ring(dev); - - { - u32 wol = readl(ioaddr + WOLCmd) & WakeOptsSummary; - if (wol) { - /* restart the NIC in WOL mode. - * The nic must be stopped for this. - */ - enable_wol_mode(dev, 0); - } else { - /* Restore PME enable bit unmolested */ - writel(np->SavedClkRun, ioaddr + ClkRun); - } - } - return 0; -} - - -static void __devexit natsemi_remove1 (struct pci_dev *pdev) -{ - struct net_device *dev = pci_get_drvdata(pdev); - void __iomem * ioaddr = ns_ioaddr(dev); - - NATSEMI_REMOVE_FILE(pdev, dspcfg_workaround); - unregister_netdev (dev); - pci_release_regions (pdev); - iounmap(ioaddr); - free_netdev (dev); - pci_set_drvdata(pdev, NULL); -} - -#ifdef CONFIG_PM - -/* - * The ns83815 chip doesn't have explicit RxStop bits. - * Kicking the Rx or Tx process for a new packet reenables the Rx process - * of the nic, thus this function must be very careful: - * - * suspend/resume synchronization: - * entry points: - * netdev_open, netdev_close, netdev_ioctl, set_rx_mode, intr_handler, - * start_tx, ns_tx_timeout - * - * No function accesses the hardware without checking np->hands_off. - * the check occurs under spin_lock_irq(&np->lock); - * exceptions: - * * netdev_ioctl: noncritical access. - * * netdev_open: cannot happen due to the device_detach - * * netdev_close: doesn't hurt. - * * netdev_timer: timer stopped by natsemi_suspend. - * * intr_handler: doesn't acquire the spinlock. suspend calls - * disable_irq() to enforce synchronization. - * * natsemi_poll: checks before reenabling interrupts. suspend - * sets hands_off, disables interrupts and then waits with - * napi_disable(). - * - * Interrupts must be disabled, otherwise hands_off can cause irq storms. - */ - -static int natsemi_suspend (struct pci_dev *pdev, pm_message_t state) -{ - struct net_device *dev = pci_get_drvdata (pdev); - struct netdev_private *np = netdev_priv(dev); - void __iomem * ioaddr = ns_ioaddr(dev); - - rtnl_lock(); - if (netif_running (dev)) { - del_timer_sync(&np->timer); - - disable_irq(dev->irq); - spin_lock_irq(&np->lock); - - natsemi_irq_disable(dev); - np->hands_off = 1; - natsemi_stop_rxtx(dev); - netif_stop_queue(dev); - - spin_unlock_irq(&np->lock); - enable_irq(dev->irq); - - napi_disable(&np->napi); - - /* Update the error counts. */ - __get_stats(dev); - - /* pci_power_off(pdev, -1); */ - drain_ring(dev); - { - u32 wol = readl(ioaddr + WOLCmd) & WakeOptsSummary; - /* Restore PME enable bit */ - if (wol) { - /* restart the NIC in WOL mode. - * The nic must be stopped for this. - * FIXME: use the WOL interrupt - */ - enable_wol_mode(dev, 0); - } else { - /* Restore PME enable bit unmolested */ - writel(np->SavedClkRun, ioaddr + ClkRun); - } - } - } - netif_device_detach(dev); - rtnl_unlock(); - return 0; -} - - -static int natsemi_resume (struct pci_dev *pdev) -{ - struct net_device *dev = pci_get_drvdata (pdev); - struct netdev_private *np = netdev_priv(dev); - int ret = 0; - - rtnl_lock(); - if (netif_device_present(dev)) - goto out; - if (netif_running(dev)) { - BUG_ON(!np->hands_off); - ret = pci_enable_device(pdev); - if (ret < 0) { - dev_err(&pdev->dev, - "pci_enable_device() failed: %d\n", ret); - goto out; - } - /* pci_power_on(pdev); */ - - napi_enable(&np->napi); - - natsemi_reset(dev); - init_ring(dev); - disable_irq(dev->irq); - spin_lock_irq(&np->lock); - np->hands_off = 0; - init_registers(dev); - netif_device_attach(dev); - spin_unlock_irq(&np->lock); - enable_irq(dev->irq); - - mod_timer(&np->timer, round_jiffies(jiffies + 1*HZ)); - } - netif_device_attach(dev); -out: - rtnl_unlock(); - return ret; -} - -#endif /* CONFIG_PM */ - -static struct pci_driver natsemi_driver = { - .name = DRV_NAME, - .id_table = natsemi_pci_tbl, - .probe = natsemi_probe1, - .remove = __devexit_p(natsemi_remove1), -#ifdef CONFIG_PM - .suspend = natsemi_suspend, - .resume = natsemi_resume, -#endif -}; - -static int __init natsemi_init_mod (void) -{ -/* when a module, this is printed whether or not devices are found in probe */ -#ifdef MODULE - printk(version); -#endif - - return pci_register_driver(&natsemi_driver); -} - -static void __exit natsemi_exit_mod (void) -{ - pci_unregister_driver (&natsemi_driver); -} - -module_init(natsemi_init_mod); -module_exit(natsemi_exit_mod); - diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c deleted file mode 100644 index e736aec588fc..000000000000 --- a/drivers/net/ns83820.c +++ /dev/null @@ -1,2312 +0,0 @@ -#define VERSION "0.23" -/* ns83820.c by Benjamin LaHaise with contributions. - * - * Questions/comments/discussion to linux-ns83820@kvack.org. - * - * $Revision: 1.34.2.23 $ - * - * Copyright 2001 Benjamin LaHaise. - * Copyright 2001, 2002 Red Hat. - * - * Mmmm, chocolate vanilla mocha... - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * - * ChangeLog - * ========= - * 20010414 0.1 - created - * 20010622 0.2 - basic rx and tx. - * 20010711 0.3 - added duplex and link state detection support. - * 20010713 0.4 - zero copy, no hangs. - * 0.5 - 64 bit dma support (davem will hate me for this) - * - disable jumbo frames to avoid tx hangs - * - work around tx deadlocks on my 1.02 card via - * fiddling with TXCFG - * 20010810 0.6 - use pci dma api for ringbuffers, work on ia64 - * 20010816 0.7 - misc cleanups - * 20010826 0.8 - fix critical zero copy bugs - * 0.9 - internal experiment - * 20010827 0.10 - fix ia64 unaligned access. - * 20010906 0.11 - accept all packets with checksum errors as - * otherwise fragments get lost - * - fix >> 32 bugs - * 0.12 - add statistics counters - * - add allmulti/promisc support - * 20011009 0.13 - hotplug support, other smaller pci api cleanups - * 20011204 0.13a - optical transceiver support added - * by Michael Clark - * 20011205 0.13b - call register_netdev earlier in initialization - * suppress duplicate link status messages - * 20011117 0.14 - ethtool GDRVINFO, GLINK support from jgarzik - * 20011204 0.15 get ppc (big endian) working - * 20011218 0.16 various cleanups - * 20020310 0.17 speedups - * 20020610 0.18 - actually use the pci dma api for highmem - * - remove pci latency register fiddling - * 0.19 - better bist support - * - add ihr and reset_phy parameters - * - gmii bus probing - * - fix missed txok introduced during performance - * tuning - * 0.20 - fix stupid RFEN thinko. i am such a smurf. - * 20040828 0.21 - add hardware vlan accleration - * by Neil Horman - * 20050406 0.22 - improved DAC ifdefs from Andi Kleen - * - removal of dead code from Adrian Bunk - * - fix half duplex collision behaviour - * Driver Overview - * =============== - * - * This driver was originally written for the National Semiconductor - * 83820 chip, a 10/100/1000 Mbps 64 bit PCI ethernet NIC. Hopefully - * this code will turn out to be a) clean, b) correct, and c) fast. - * With that in mind, I'm aiming to split the code up as much as - * reasonably possible. At present there are X major sections that - * break down into a) packet receive, b) packet transmit, c) link - * management, d) initialization and configuration. Where possible, - * these code paths are designed to run in parallel. - * - * This driver has been tested and found to work with the following - * cards (in no particular order): - * - * Cameo SOHO-GA2000T SOHO-GA2500T - * D-Link DGE-500T - * PureData PDP8023Z-TG - * SMC SMC9452TX SMC9462TX - * Netgear GA621 - * - * Special thanks to SMC for providing hardware to test this driver on. - * - * Reports of success or failure would be greatly appreciated. - */ -//#define dprintk printk -#define dprintk(x...) do { } while (0) - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include /* for iph */ -#include /* for IPPROTO_... */ -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#define DRV_NAME "ns83820" - -/* Global parameters. See module_param near the bottom. */ -static int ihr = 2; -static int reset_phy = 0; -static int lnksts = 0; /* CFG_LNKSTS bit polarity */ - -/* Dprintk is used for more interesting debug events */ -#undef Dprintk -#define Dprintk dprintk - -/* tunables */ -#define RX_BUF_SIZE 1500 /* 8192 */ -#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) -#define NS83820_VLAN_ACCEL_SUPPORT -#endif - -/* Must not exceed ~65000. */ -#define NR_RX_DESC 64 -#define NR_TX_DESC 128 - -/* not tunable */ -#define REAL_RX_BUF_SIZE (RX_BUF_SIZE + 14) /* rx/tx mac addr + type */ - -#define MIN_TX_DESC_FREE 8 - -/* register defines */ -#define CFGCS 0x04 - -#define CR_TXE 0x00000001 -#define CR_TXD 0x00000002 -/* Ramit : Here's a tip, don't do a RXD immediately followed by an RXE - * The Receive engine skips one descriptor and moves - * onto the next one!! */ -#define CR_RXE 0x00000004 -#define CR_RXD 0x00000008 -#define CR_TXR 0x00000010 -#define CR_RXR 0x00000020 -#define CR_SWI 0x00000080 -#define CR_RST 0x00000100 - -#define PTSCR_EEBIST_FAIL 0x00000001 -#define PTSCR_EEBIST_EN 0x00000002 -#define PTSCR_EELOAD_EN 0x00000004 -#define PTSCR_RBIST_FAIL 0x000001b8 -#define PTSCR_RBIST_DONE 0x00000200 -#define PTSCR_RBIST_EN 0x00000400 -#define PTSCR_RBIST_RST 0x00002000 - -#define MEAR_EEDI 0x00000001 -#define MEAR_EEDO 0x00000002 -#define MEAR_EECLK 0x00000004 -#define MEAR_EESEL 0x00000008 -#define MEAR_MDIO 0x00000010 -#define MEAR_MDDIR 0x00000020 -#define MEAR_MDC 0x00000040 - -#define ISR_TXDESC3 0x40000000 -#define ISR_TXDESC2 0x20000000 -#define ISR_TXDESC1 0x10000000 -#define ISR_TXDESC0 0x08000000 -#define ISR_RXDESC3 0x04000000 -#define ISR_RXDESC2 0x02000000 -#define ISR_RXDESC1 0x01000000 -#define ISR_RXDESC0 0x00800000 -#define ISR_TXRCMP 0x00400000 -#define ISR_RXRCMP 0x00200000 -#define ISR_DPERR 0x00100000 -#define ISR_SSERR 0x00080000 -#define ISR_RMABT 0x00040000 -#define ISR_RTABT 0x00020000 -#define ISR_RXSOVR 0x00010000 -#define ISR_HIBINT 0x00008000 -#define ISR_PHY 0x00004000 -#define ISR_PME 0x00002000 -#define ISR_SWI 0x00001000 -#define ISR_MIB 0x00000800 -#define ISR_TXURN 0x00000400 -#define ISR_TXIDLE 0x00000200 -#define ISR_TXERR 0x00000100 -#define ISR_TXDESC 0x00000080 -#define ISR_TXOK 0x00000040 -#define ISR_RXORN 0x00000020 -#define ISR_RXIDLE 0x00000010 -#define ISR_RXEARLY 0x00000008 -#define ISR_RXERR 0x00000004 -#define ISR_RXDESC 0x00000002 -#define ISR_RXOK 0x00000001 - -#define TXCFG_CSI 0x80000000 -#define TXCFG_HBI 0x40000000 -#define TXCFG_MLB 0x20000000 -#define TXCFG_ATP 0x10000000 -#define TXCFG_ECRETRY 0x00800000 -#define TXCFG_BRST_DIS 0x00080000 -#define TXCFG_MXDMA1024 0x00000000 -#define TXCFG_MXDMA512 0x00700000 -#define TXCFG_MXDMA256 0x00600000 -#define TXCFG_MXDMA128 0x00500000 -#define TXCFG_MXDMA64 0x00400000 -#define TXCFG_MXDMA32 0x00300000 -#define TXCFG_MXDMA16 0x00200000 -#define TXCFG_MXDMA8 0x00100000 - -#define CFG_LNKSTS 0x80000000 -#define CFG_SPDSTS 0x60000000 -#define CFG_SPDSTS1 0x40000000 -#define CFG_SPDSTS0 0x20000000 -#define CFG_DUPSTS 0x10000000 -#define CFG_TBI_EN 0x01000000 -#define CFG_MODE_1000 0x00400000 -/* Ramit : Dont' ever use AUTO_1000, it never works and is buggy. - * Read the Phy response and then configure the MAC accordingly */ -#define CFG_AUTO_1000 0x00200000 -#define CFG_PINT_CTL 0x001c0000 -#define CFG_PINT_DUPSTS 0x00100000 -#define CFG_PINT_LNKSTS 0x00080000 -#define CFG_PINT_SPDSTS 0x00040000 -#define CFG_TMRTEST 0x00020000 -#define CFG_MRM_DIS 0x00010000 -#define CFG_MWI_DIS 0x00008000 -#define CFG_T64ADDR 0x00004000 -#define CFG_PCI64_DET 0x00002000 -#define CFG_DATA64_EN 0x00001000 -#define CFG_M64ADDR 0x00000800 -#define CFG_PHY_RST 0x00000400 -#define CFG_PHY_DIS 0x00000200 -#define CFG_EXTSTS_EN 0x00000100 -#define CFG_REQALG 0x00000080 -#define CFG_SB 0x00000040 -#define CFG_POW 0x00000020 -#define CFG_EXD 0x00000010 -#define CFG_PESEL 0x00000008 -#define CFG_BROM_DIS 0x00000004 -#define CFG_EXT_125 0x00000002 -#define CFG_BEM 0x00000001 - -#define EXTSTS_UDPPKT 0x00200000 -#define EXTSTS_TCPPKT 0x00080000 -#define EXTSTS_IPPKT 0x00020000 -#define EXTSTS_VPKT 0x00010000 -#define EXTSTS_VTG_MASK 0x0000ffff - -#define SPDSTS_POLARITY (CFG_SPDSTS1 | CFG_SPDSTS0 | CFG_DUPSTS | (lnksts ? CFG_LNKSTS : 0)) - -#define MIBC_MIBS 0x00000008 -#define MIBC_ACLR 0x00000004 -#define MIBC_FRZ 0x00000002 -#define MIBC_WRN 0x00000001 - -#define PCR_PSEN (1 << 31) -#define PCR_PS_MCAST (1 << 30) -#define PCR_PS_DA (1 << 29) -#define PCR_STHI_8 (3 << 23) -#define PCR_STLO_4 (1 << 23) -#define PCR_FFHI_8K (3 << 21) -#define PCR_FFLO_4K (1 << 21) -#define PCR_PAUSE_CNT 0xFFFE - -#define RXCFG_AEP 0x80000000 -#define RXCFG_ARP 0x40000000 -#define RXCFG_STRIPCRC 0x20000000 -#define RXCFG_RX_FD 0x10000000 -#define RXCFG_ALP 0x08000000 -#define RXCFG_AIRL 0x04000000 -#define RXCFG_MXDMA512 0x00700000 -#define RXCFG_DRTH 0x0000003e -#define RXCFG_DRTH0 0x00000002 - -#define RFCR_RFEN 0x80000000 -#define RFCR_AAB 0x40000000 -#define RFCR_AAM 0x20000000 -#define RFCR_AAU 0x10000000 -#define RFCR_APM 0x08000000 -#define RFCR_APAT 0x07800000 -#define RFCR_APAT3 0x04000000 -#define RFCR_APAT2 0x02000000 -#define RFCR_APAT1 0x01000000 -#define RFCR_APAT0 0x00800000 -#define RFCR_AARP 0x00400000 -#define RFCR_MHEN 0x00200000 -#define RFCR_UHEN 0x00100000 -#define RFCR_ULM 0x00080000 - -#define VRCR_RUDPE 0x00000080 -#define VRCR_RTCPE 0x00000040 -#define VRCR_RIPE 0x00000020 -#define VRCR_IPEN 0x00000010 -#define VRCR_DUTF 0x00000008 -#define VRCR_DVTF 0x00000004 -#define VRCR_VTREN 0x00000002 -#define VRCR_VTDEN 0x00000001 - -#define VTCR_PPCHK 0x00000008 -#define VTCR_GCHK 0x00000004 -#define VTCR_VPPTI 0x00000002 -#define VTCR_VGTI 0x00000001 - -#define CR 0x00 -#define CFG 0x04 -#define MEAR 0x08 -#define PTSCR 0x0c -#define ISR 0x10 -#define IMR 0x14 -#define IER 0x18 -#define IHR 0x1c -#define TXDP 0x20 -#define TXDP_HI 0x24 -#define TXCFG 0x28 -#define GPIOR 0x2c -#define RXDP 0x30 -#define RXDP_HI 0x34 -#define RXCFG 0x38 -#define PQCR 0x3c -#define WCSR 0x40 -#define PCR 0x44 -#define RFCR 0x48 -#define RFDR 0x4c - -#define SRR 0x58 - -#define VRCR 0xbc -#define VTCR 0xc0 -#define VDR 0xc4 -#define CCSR 0xcc - -#define TBICR 0xe0 -#define TBISR 0xe4 -#define TANAR 0xe8 -#define TANLPAR 0xec -#define TANER 0xf0 -#define TESR 0xf4 - -#define TBICR_MR_AN_ENABLE 0x00001000 -#define TBICR_MR_RESTART_AN 0x00000200 - -#define TBISR_MR_LINK_STATUS 0x00000020 -#define TBISR_MR_AN_COMPLETE 0x00000004 - -#define TANAR_PS2 0x00000100 -#define TANAR_PS1 0x00000080 -#define TANAR_HALF_DUP 0x00000040 -#define TANAR_FULL_DUP 0x00000020 - -#define GPIOR_GP5_OE 0x00000200 -#define GPIOR_GP4_OE 0x00000100 -#define GPIOR_GP3_OE 0x00000080 -#define GPIOR_GP2_OE 0x00000040 -#define GPIOR_GP1_OE 0x00000020 -#define GPIOR_GP3_OUT 0x00000004 -#define GPIOR_GP1_OUT 0x00000001 - -#define LINK_AUTONEGOTIATE 0x01 -#define LINK_DOWN 0x02 -#define LINK_UP 0x04 - -#define HW_ADDR_LEN sizeof(dma_addr_t) -#define desc_addr_set(desc, addr) \ - do { \ - ((desc)[0] = cpu_to_le32(addr)); \ - if (HW_ADDR_LEN == 8) \ - (desc)[1] = cpu_to_le32(((u64)addr) >> 32); \ - } while(0) -#define desc_addr_get(desc) \ - (le32_to_cpu((desc)[0]) | \ - (HW_ADDR_LEN == 8 ? ((dma_addr_t)le32_to_cpu((desc)[1]))<<32 : 0)) - -#define DESC_LINK 0 -#define DESC_BUFPTR (DESC_LINK + HW_ADDR_LEN/4) -#define DESC_CMDSTS (DESC_BUFPTR + HW_ADDR_LEN/4) -#define DESC_EXTSTS (DESC_CMDSTS + 4/4) - -#define CMDSTS_OWN 0x80000000 -#define CMDSTS_MORE 0x40000000 -#define CMDSTS_INTR 0x20000000 -#define CMDSTS_ERR 0x10000000 -#define CMDSTS_OK 0x08000000 -#define CMDSTS_RUNT 0x00200000 -#define CMDSTS_LEN_MASK 0x0000ffff - -#define CMDSTS_DEST_MASK 0x01800000 -#define CMDSTS_DEST_SELF 0x00800000 -#define CMDSTS_DEST_MULTI 0x01000000 - -#define DESC_SIZE 8 /* Should be cache line sized */ - -struct rx_info { - spinlock_t lock; - int up; - unsigned long idle; - - struct sk_buff *skbs[NR_RX_DESC]; - - __le32 *next_rx_desc; - u16 next_rx, next_empty; - - __le32 *descs; - dma_addr_t phy_descs; -}; - - -struct ns83820 { - u8 __iomem *base; - - struct pci_dev *pci_dev; - struct net_device *ndev; - - struct rx_info rx_info; - struct tasklet_struct rx_tasklet; - - unsigned ihr; - struct work_struct tq_refill; - - /* protects everything below. irqsave when using. */ - spinlock_t misc_lock; - - u32 CFG_cache; - - u32 MEAR_cache; - u32 IMR_cache; - - unsigned linkstate; - - spinlock_t tx_lock; - - u16 tx_done_idx; - u16 tx_idx; - volatile u16 tx_free_idx; /* idx of free desc chain */ - u16 tx_intr_idx; - - atomic_t nr_tx_skbs; - struct sk_buff *tx_skbs[NR_TX_DESC]; - - char pad[16] __attribute__((aligned(16))); - __le32 *tx_descs; - dma_addr_t tx_phy_descs; - - struct timer_list tx_watchdog; -}; - -static inline struct ns83820 *PRIV(struct net_device *dev) -{ - return netdev_priv(dev); -} - -#define __kick_rx(dev) writel(CR_RXE, dev->base + CR) - -static inline void kick_rx(struct net_device *ndev) -{ - struct ns83820 *dev = PRIV(ndev); - dprintk("kick_rx: maybe kicking\n"); - if (test_and_clear_bit(0, &dev->rx_info.idle)) { - dprintk("actually kicking\n"); - writel(dev->rx_info.phy_descs + - (4 * DESC_SIZE * dev->rx_info.next_rx), - dev->base + RXDP); - if (dev->rx_info.next_rx == dev->rx_info.next_empty) - printk(KERN_DEBUG "%s: uh-oh: next_rx == next_empty???\n", - ndev->name); - __kick_rx(dev); - } -} - -//free = (tx_done_idx + NR_TX_DESC-2 - free_idx) % NR_TX_DESC -#define start_tx_okay(dev) \ - (((NR_TX_DESC-2 + dev->tx_done_idx - dev->tx_free_idx) % NR_TX_DESC) > MIN_TX_DESC_FREE) - -/* Packet Receiver - * - * The hardware supports linked lists of receive descriptors for - * which ownership is transferred back and forth by means of an - * ownership bit. While the hardware does support the use of a - * ring for receive descriptors, we only make use of a chain in - * an attempt to reduce bus traffic under heavy load scenarios. - * This will also make bugs a bit more obvious. The current code - * only makes use of a single rx chain; I hope to implement - * priority based rx for version 1.0. Goal: even under overload - * conditions, still route realtime traffic with as low jitter as - * possible. - */ -static inline void build_rx_desc(struct ns83820 *dev, __le32 *desc, dma_addr_t link, dma_addr_t buf, u32 cmdsts, u32 extsts) -{ - desc_addr_set(desc + DESC_LINK, link); - desc_addr_set(desc + DESC_BUFPTR, buf); - desc[DESC_EXTSTS] = cpu_to_le32(extsts); - mb(); - desc[DESC_CMDSTS] = cpu_to_le32(cmdsts); -} - -#define nr_rx_empty(dev) ((NR_RX_DESC-2 + dev->rx_info.next_rx - dev->rx_info.next_empty) % NR_RX_DESC) -static inline int ns83820_add_rx_skb(struct ns83820 *dev, struct sk_buff *skb) -{ - unsigned next_empty; - u32 cmdsts; - __le32 *sg; - dma_addr_t buf; - - next_empty = dev->rx_info.next_empty; - - /* don't overrun last rx marker */ - if (unlikely(nr_rx_empty(dev) <= 2)) { - kfree_skb(skb); - return 1; - } - -#if 0 - dprintk("next_empty[%d] nr_used[%d] next_rx[%d]\n", - dev->rx_info.next_empty, - dev->rx_info.nr_used, - dev->rx_info.next_rx - ); -#endif - - sg = dev->rx_info.descs + (next_empty * DESC_SIZE); - BUG_ON(NULL != dev->rx_info.skbs[next_empty]); - dev->rx_info.skbs[next_empty] = skb; - - dev->rx_info.next_empty = (next_empty + 1) % NR_RX_DESC; - cmdsts = REAL_RX_BUF_SIZE | CMDSTS_INTR; - buf = pci_map_single(dev->pci_dev, skb->data, - REAL_RX_BUF_SIZE, PCI_DMA_FROMDEVICE); - build_rx_desc(dev, sg, 0, buf, cmdsts, 0); - /* update link of previous rx */ - if (likely(next_empty != dev->rx_info.next_rx)) - dev->rx_info.descs[((NR_RX_DESC + next_empty - 1) % NR_RX_DESC) * DESC_SIZE] = cpu_to_le32(dev->rx_info.phy_descs + (next_empty * DESC_SIZE * 4)); - - return 0; -} - -static inline int rx_refill(struct net_device *ndev, gfp_t gfp) -{ - struct ns83820 *dev = PRIV(ndev); - unsigned i; - unsigned long flags = 0; - - if (unlikely(nr_rx_empty(dev) <= 2)) - return 0; - - dprintk("rx_refill(%p)\n", ndev); - if (gfp == GFP_ATOMIC) - spin_lock_irqsave(&dev->rx_info.lock, flags); - for (i=0; idata - PTR_ALIGN(skb->data, 16)); - if (gfp != GFP_ATOMIC) - spin_lock_irqsave(&dev->rx_info.lock, flags); - res = ns83820_add_rx_skb(dev, skb); - if (gfp != GFP_ATOMIC) - spin_unlock_irqrestore(&dev->rx_info.lock, flags); - if (res) { - i = 1; - break; - } - } - if (gfp == GFP_ATOMIC) - spin_unlock_irqrestore(&dev->rx_info.lock, flags); - - return i ? 0 : -ENOMEM; -} - -static void rx_refill_atomic(struct net_device *ndev) -{ - rx_refill(ndev, GFP_ATOMIC); -} - -/* REFILL */ -static inline void queue_refill(struct work_struct *work) -{ - struct ns83820 *dev = container_of(work, struct ns83820, tq_refill); - struct net_device *ndev = dev->ndev; - - rx_refill(ndev, GFP_KERNEL); - if (dev->rx_info.up) - kick_rx(ndev); -} - -static inline void clear_rx_desc(struct ns83820 *dev, unsigned i) -{ - build_rx_desc(dev, dev->rx_info.descs + (DESC_SIZE * i), 0, 0, CMDSTS_OWN, 0); -} - -static void phy_intr(struct net_device *ndev) -{ - struct ns83820 *dev = PRIV(ndev); - static const char *speeds[] = { "10", "100", "1000", "1000(?)", "1000F" }; - u32 cfg, new_cfg; - u32 tbisr, tanar, tanlpar; - int speed, fullduplex, newlinkstate; - - cfg = readl(dev->base + CFG) ^ SPDSTS_POLARITY; - - if (dev->CFG_cache & CFG_TBI_EN) { - /* we have an optical transceiver */ - tbisr = readl(dev->base + TBISR); - tanar = readl(dev->base + TANAR); - tanlpar = readl(dev->base + TANLPAR); - dprintk("phy_intr: tbisr=%08x, tanar=%08x, tanlpar=%08x\n", - tbisr, tanar, tanlpar); - - if ( (fullduplex = (tanlpar & TANAR_FULL_DUP) && - (tanar & TANAR_FULL_DUP)) ) { - - /* both of us are full duplex */ - writel(readl(dev->base + TXCFG) - | TXCFG_CSI | TXCFG_HBI | TXCFG_ATP, - dev->base + TXCFG); - writel(readl(dev->base + RXCFG) | RXCFG_RX_FD, - dev->base + RXCFG); - /* Light up full duplex LED */ - writel(readl(dev->base + GPIOR) | GPIOR_GP1_OUT, - dev->base + GPIOR); - - } else if (((tanlpar & TANAR_HALF_DUP) && - (tanar & TANAR_HALF_DUP)) || - ((tanlpar & TANAR_FULL_DUP) && - (tanar & TANAR_HALF_DUP)) || - ((tanlpar & TANAR_HALF_DUP) && - (tanar & TANAR_FULL_DUP))) { - - /* one or both of us are half duplex */ - writel((readl(dev->base + TXCFG) - & ~(TXCFG_CSI | TXCFG_HBI)) | TXCFG_ATP, - dev->base + TXCFG); - writel(readl(dev->base + RXCFG) & ~RXCFG_RX_FD, - dev->base + RXCFG); - /* Turn off full duplex LED */ - writel(readl(dev->base + GPIOR) & ~GPIOR_GP1_OUT, - dev->base + GPIOR); - } - - speed = 4; /* 1000F */ - - } else { - /* we have a copper transceiver */ - new_cfg = dev->CFG_cache & ~(CFG_SB | CFG_MODE_1000 | CFG_SPDSTS); - - if (cfg & CFG_SPDSTS1) - new_cfg |= CFG_MODE_1000; - else - new_cfg &= ~CFG_MODE_1000; - - speed = ((cfg / CFG_SPDSTS0) & 3); - fullduplex = (cfg & CFG_DUPSTS); - - if (fullduplex) { - new_cfg |= CFG_SB; - writel(readl(dev->base + TXCFG) - | TXCFG_CSI | TXCFG_HBI, - dev->base + TXCFG); - writel(readl(dev->base + RXCFG) | RXCFG_RX_FD, - dev->base + RXCFG); - } else { - writel(readl(dev->base + TXCFG) - & ~(TXCFG_CSI | TXCFG_HBI), - dev->base + TXCFG); - writel(readl(dev->base + RXCFG) & ~(RXCFG_RX_FD), - dev->base + RXCFG); - } - - if ((cfg & CFG_LNKSTS) && - ((new_cfg ^ dev->CFG_cache) != 0)) { - writel(new_cfg, dev->base + CFG); - dev->CFG_cache = new_cfg; - } - - dev->CFG_cache &= ~CFG_SPDSTS; - dev->CFG_cache |= cfg & CFG_SPDSTS; - } - - newlinkstate = (cfg & CFG_LNKSTS) ? LINK_UP : LINK_DOWN; - - if (newlinkstate & LINK_UP && - dev->linkstate != newlinkstate) { - netif_start_queue(ndev); - netif_wake_queue(ndev); - printk(KERN_INFO "%s: link now %s mbps, %s duplex and up.\n", - ndev->name, - speeds[speed], - fullduplex ? "full" : "half"); - } else if (newlinkstate & LINK_DOWN && - dev->linkstate != newlinkstate) { - netif_stop_queue(ndev); - printk(KERN_INFO "%s: link now down.\n", ndev->name); - } - - dev->linkstate = newlinkstate; -} - -static int ns83820_setup_rx(struct net_device *ndev) -{ - struct ns83820 *dev = PRIV(ndev); - unsigned i; - int ret; - - dprintk("ns83820_setup_rx(%p)\n", ndev); - - dev->rx_info.idle = 1; - dev->rx_info.next_rx = 0; - dev->rx_info.next_rx_desc = dev->rx_info.descs; - dev->rx_info.next_empty = 0; - - for (i=0; ibase + RXDP_HI); - writel(dev->rx_info.phy_descs, dev->base + RXDP); - - ret = rx_refill(ndev, GFP_KERNEL); - if (!ret) { - dprintk("starting receiver\n"); - /* prevent the interrupt handler from stomping on us */ - spin_lock_irq(&dev->rx_info.lock); - - writel(0x0001, dev->base + CCSR); - writel(0, dev->base + RFCR); - writel(0x7fc00000, dev->base + RFCR); - writel(0xffc00000, dev->base + RFCR); - - dev->rx_info.up = 1; - - phy_intr(ndev); - - /* Okay, let it rip */ - spin_lock(&dev->misc_lock); - dev->IMR_cache |= ISR_PHY; - dev->IMR_cache |= ISR_RXRCMP; - //dev->IMR_cache |= ISR_RXERR; - //dev->IMR_cache |= ISR_RXOK; - dev->IMR_cache |= ISR_RXORN; - dev->IMR_cache |= ISR_RXSOVR; - dev->IMR_cache |= ISR_RXDESC; - dev->IMR_cache |= ISR_RXIDLE; - dev->IMR_cache |= ISR_TXDESC; - dev->IMR_cache |= ISR_TXIDLE; - - writel(dev->IMR_cache, dev->base + IMR); - writel(1, dev->base + IER); - spin_unlock(&dev->misc_lock); - - kick_rx(ndev); - - spin_unlock_irq(&dev->rx_info.lock); - } - return ret; -} - -static void ns83820_cleanup_rx(struct ns83820 *dev) -{ - unsigned i; - unsigned long flags; - - dprintk("ns83820_cleanup_rx(%p)\n", dev); - - /* disable receive interrupts */ - spin_lock_irqsave(&dev->misc_lock, flags); - dev->IMR_cache &= ~(ISR_RXOK | ISR_RXDESC | ISR_RXERR | ISR_RXEARLY | ISR_RXIDLE); - writel(dev->IMR_cache, dev->base + IMR); - spin_unlock_irqrestore(&dev->misc_lock, flags); - - /* synchronize with the interrupt handler and kill it */ - dev->rx_info.up = 0; - synchronize_irq(dev->pci_dev->irq); - - /* touch the pci bus... */ - readl(dev->base + IMR); - - /* assumes the transmitter is already disabled and reset */ - writel(0, dev->base + RXDP_HI); - writel(0, dev->base + RXDP); - - for (i=0; irx_info.skbs[i]; - dev->rx_info.skbs[i] = NULL; - clear_rx_desc(dev, i); - kfree_skb(skb); - } -} - -static void ns83820_rx_kick(struct net_device *ndev) -{ - struct ns83820 *dev = PRIV(ndev); - /*if (nr_rx_empty(dev) >= NR_RX_DESC/4)*/ { - if (dev->rx_info.up) { - rx_refill_atomic(ndev); - kick_rx(ndev); - } - } - - if (dev->rx_info.up && nr_rx_empty(dev) > NR_RX_DESC*3/4) - schedule_work(&dev->tq_refill); - else - kick_rx(ndev); - if (dev->rx_info.idle) - printk(KERN_DEBUG "%s: BAD\n", ndev->name); -} - -/* rx_irq - * - */ -static void rx_irq(struct net_device *ndev) -{ - struct ns83820 *dev = PRIV(ndev); - struct rx_info *info = &dev->rx_info; - unsigned next_rx; - int rx_rc, len; - u32 cmdsts; - __le32 *desc; - unsigned long flags; - int nr = 0; - - dprintk("rx_irq(%p)\n", ndev); - dprintk("rxdp: %08x, descs: %08lx next_rx[%d]: %p next_empty[%d]: %p\n", - readl(dev->base + RXDP), - (long)(dev->rx_info.phy_descs), - (int)dev->rx_info.next_rx, - (dev->rx_info.descs + (DESC_SIZE * dev->rx_info.next_rx)), - (int)dev->rx_info.next_empty, - (dev->rx_info.descs + (DESC_SIZE * dev->rx_info.next_empty)) - ); - - spin_lock_irqsave(&info->lock, flags); - if (!info->up) - goto out; - - dprintk("walking descs\n"); - next_rx = info->next_rx; - desc = info->next_rx_desc; - while ((CMDSTS_OWN & (cmdsts = le32_to_cpu(desc[DESC_CMDSTS]))) && - (cmdsts != CMDSTS_OWN)) { - struct sk_buff *skb; - u32 extsts = le32_to_cpu(desc[DESC_EXTSTS]); - dma_addr_t bufptr = desc_addr_get(desc + DESC_BUFPTR); - - dprintk("cmdsts: %08x\n", cmdsts); - dprintk("link: %08x\n", cpu_to_le32(desc[DESC_LINK])); - dprintk("extsts: %08x\n", extsts); - - skb = info->skbs[next_rx]; - info->skbs[next_rx] = NULL; - info->next_rx = (next_rx + 1) % NR_RX_DESC; - - mb(); - clear_rx_desc(dev, next_rx); - - pci_unmap_single(dev->pci_dev, bufptr, - RX_BUF_SIZE, PCI_DMA_FROMDEVICE); - len = cmdsts & CMDSTS_LEN_MASK; -#ifdef NS83820_VLAN_ACCEL_SUPPORT - /* NH: As was mentioned below, this chip is kinda - * brain dead about vlan tag stripping. Frames - * that are 64 bytes with a vlan header appended - * like arp frames, or pings, are flagged as Runts - * when the tag is stripped and hardware. This - * also means that the OK bit in the descriptor - * is cleared when the frame comes in so we have - * to do a specific length check here to make sure - * the frame would have been ok, had we not stripped - * the tag. - */ - if (likely((CMDSTS_OK & cmdsts) || - ((cmdsts & CMDSTS_RUNT) && len >= 56))) { -#else - if (likely(CMDSTS_OK & cmdsts)) { -#endif - skb_put(skb, len); - if (unlikely(!skb)) - goto netdev_mangle_me_harder_failed; - if (cmdsts & CMDSTS_DEST_MULTI) - ndev->stats.multicast++; - ndev->stats.rx_packets++; - ndev->stats.rx_bytes += len; - if ((extsts & 0x002a0000) && !(extsts & 0x00540000)) { - skb->ip_summed = CHECKSUM_UNNECESSARY; - } else { - skb_checksum_none_assert(skb); - } - skb->protocol = eth_type_trans(skb, ndev); -#ifdef NS83820_VLAN_ACCEL_SUPPORT - if(extsts & EXTSTS_VPKT) { - unsigned short tag; - - tag = ntohs(extsts & EXTSTS_VTG_MASK); - __vlan_hwaccel_put_tag(skb, tag); - } -#endif - rx_rc = netif_rx(skb); - if (NET_RX_DROP == rx_rc) { -netdev_mangle_me_harder_failed: - ndev->stats.rx_dropped++; - } - } else { - kfree_skb(skb); - } - - nr++; - next_rx = info->next_rx; - desc = info->descs + (DESC_SIZE * next_rx); - } - info->next_rx = next_rx; - info->next_rx_desc = info->descs + (DESC_SIZE * next_rx); - -out: - if (0 && !nr) { - Dprintk("dazed: cmdsts_f: %08x\n", cmdsts); - } - - spin_unlock_irqrestore(&info->lock, flags); -} - -static void rx_action(unsigned long _dev) -{ - struct net_device *ndev = (void *)_dev; - struct ns83820 *dev = PRIV(ndev); - rx_irq(ndev); - writel(ihr, dev->base + IHR); - - spin_lock_irq(&dev->misc_lock); - dev->IMR_cache |= ISR_RXDESC; - writel(dev->IMR_cache, dev->base + IMR); - spin_unlock_irq(&dev->misc_lock); - - rx_irq(ndev); - ns83820_rx_kick(ndev); -} - -/* Packet Transmit code - */ -static inline void kick_tx(struct ns83820 *dev) -{ - dprintk("kick_tx(%p): tx_idx=%d free_idx=%d\n", - dev, dev->tx_idx, dev->tx_free_idx); - writel(CR_TXE, dev->base + CR); -} - -/* No spinlock needed on the transmit irq path as the interrupt handler is - * serialized. - */ -static void do_tx_done(struct net_device *ndev) -{ - struct ns83820 *dev = PRIV(ndev); - u32 cmdsts, tx_done_idx; - __le32 *desc; - - dprintk("do_tx_done(%p)\n", ndev); - tx_done_idx = dev->tx_done_idx; - desc = dev->tx_descs + (tx_done_idx * DESC_SIZE); - - dprintk("tx_done_idx=%d free_idx=%d cmdsts=%08x\n", - tx_done_idx, dev->tx_free_idx, le32_to_cpu(desc[DESC_CMDSTS])); - while ((tx_done_idx != dev->tx_free_idx) && - !(CMDSTS_OWN & (cmdsts = le32_to_cpu(desc[DESC_CMDSTS]))) ) { - struct sk_buff *skb; - unsigned len; - dma_addr_t addr; - - if (cmdsts & CMDSTS_ERR) - ndev->stats.tx_errors++; - if (cmdsts & CMDSTS_OK) - ndev->stats.tx_packets++; - if (cmdsts & CMDSTS_OK) - ndev->stats.tx_bytes += cmdsts & 0xffff; - - dprintk("tx_done_idx=%d free_idx=%d cmdsts=%08x\n", - tx_done_idx, dev->tx_free_idx, cmdsts); - skb = dev->tx_skbs[tx_done_idx]; - dev->tx_skbs[tx_done_idx] = NULL; - dprintk("done(%p)\n", skb); - - len = cmdsts & CMDSTS_LEN_MASK; - addr = desc_addr_get(desc + DESC_BUFPTR); - if (skb) { - pci_unmap_single(dev->pci_dev, - addr, - len, - PCI_DMA_TODEVICE); - dev_kfree_skb_irq(skb); - atomic_dec(&dev->nr_tx_skbs); - } else - pci_unmap_page(dev->pci_dev, - addr, - len, - PCI_DMA_TODEVICE); - - tx_done_idx = (tx_done_idx + 1) % NR_TX_DESC; - dev->tx_done_idx = tx_done_idx; - desc[DESC_CMDSTS] = cpu_to_le32(0); - mb(); - desc = dev->tx_descs + (tx_done_idx * DESC_SIZE); - } - - /* Allow network stack to resume queueing packets after we've - * finished transmitting at least 1/4 of the packets in the queue. - */ - if (netif_queue_stopped(ndev) && start_tx_okay(dev)) { - dprintk("start_queue(%p)\n", ndev); - netif_start_queue(ndev); - netif_wake_queue(ndev); - } -} - -static void ns83820_cleanup_tx(struct ns83820 *dev) -{ - unsigned i; - - for (i=0; itx_skbs[i]; - dev->tx_skbs[i] = NULL; - if (skb) { - __le32 *desc = dev->tx_descs + (i * DESC_SIZE); - pci_unmap_single(dev->pci_dev, - desc_addr_get(desc + DESC_BUFPTR), - le32_to_cpu(desc[DESC_CMDSTS]) & CMDSTS_LEN_MASK, - PCI_DMA_TODEVICE); - dev_kfree_skb_irq(skb); - atomic_dec(&dev->nr_tx_skbs); - } - } - - memset(dev->tx_descs, 0, NR_TX_DESC * DESC_SIZE * 4); -} - -/* transmit routine. This code relies on the network layer serializing - * its calls in, but will run happily in parallel with the interrupt - * handler. This code currently has provisions for fragmenting tx buffers - * while trying to track down a bug in either the zero copy code or - * the tx fifo (hence the MAX_FRAG_LEN). - */ -static netdev_tx_t ns83820_hard_start_xmit(struct sk_buff *skb, - struct net_device *ndev) -{ - struct ns83820 *dev = PRIV(ndev); - u32 free_idx, cmdsts, extsts; - int nr_free, nr_frags; - unsigned tx_done_idx, last_idx; - dma_addr_t buf; - unsigned len; - skb_frag_t *frag; - int stopped = 0; - int do_intr = 0; - volatile __le32 *first_desc; - - dprintk("ns83820_hard_start_xmit\n"); - - nr_frags = skb_shinfo(skb)->nr_frags; -again: - if (unlikely(dev->CFG_cache & CFG_LNKSTS)) { - netif_stop_queue(ndev); - if (unlikely(dev->CFG_cache & CFG_LNKSTS)) - return NETDEV_TX_BUSY; - netif_start_queue(ndev); - } - - last_idx = free_idx = dev->tx_free_idx; - tx_done_idx = dev->tx_done_idx; - nr_free = (tx_done_idx + NR_TX_DESC-2 - free_idx) % NR_TX_DESC; - nr_free -= 1; - if (nr_free <= nr_frags) { - dprintk("stop_queue - not enough(%p)\n", ndev); - netif_stop_queue(ndev); - - /* Check again: we may have raced with a tx done irq */ - if (dev->tx_done_idx != tx_done_idx) { - dprintk("restart queue(%p)\n", ndev); - netif_start_queue(ndev); - goto again; - } - return NETDEV_TX_BUSY; - } - - if (free_idx == dev->tx_intr_idx) { - do_intr = 1; - dev->tx_intr_idx = (dev->tx_intr_idx + NR_TX_DESC/4) % NR_TX_DESC; - } - - nr_free -= nr_frags; - if (nr_free < MIN_TX_DESC_FREE) { - dprintk("stop_queue - last entry(%p)\n", ndev); - netif_stop_queue(ndev); - stopped = 1; - } - - frag = skb_shinfo(skb)->frags; - if (!nr_frags) - frag = NULL; - extsts = 0; - if (skb->ip_summed == CHECKSUM_PARTIAL) { - extsts |= EXTSTS_IPPKT; - if (IPPROTO_TCP == ip_hdr(skb)->protocol) - extsts |= EXTSTS_TCPPKT; - else if (IPPROTO_UDP == ip_hdr(skb)->protocol) - extsts |= EXTSTS_UDPPKT; - } - -#ifdef NS83820_VLAN_ACCEL_SUPPORT - if(vlan_tx_tag_present(skb)) { - /* fetch the vlan tag info out of the - * ancillary data if the vlan code - * is using hw vlan acceleration - */ - short tag = vlan_tx_tag_get(skb); - extsts |= (EXTSTS_VPKT | htons(tag)); - } -#endif - - len = skb->len; - if (nr_frags) - len -= skb->data_len; - buf = pci_map_single(dev->pci_dev, skb->data, len, PCI_DMA_TODEVICE); - - first_desc = dev->tx_descs + (free_idx * DESC_SIZE); - - for (;;) { - volatile __le32 *desc = dev->tx_descs + (free_idx * DESC_SIZE); - - dprintk("frag[%3u]: %4u @ 0x%08Lx\n", free_idx, len, - (unsigned long long)buf); - last_idx = free_idx; - free_idx = (free_idx + 1) % NR_TX_DESC; - desc[DESC_LINK] = cpu_to_le32(dev->tx_phy_descs + (free_idx * DESC_SIZE * 4)); - desc_addr_set(desc + DESC_BUFPTR, buf); - desc[DESC_EXTSTS] = cpu_to_le32(extsts); - - cmdsts = ((nr_frags) ? CMDSTS_MORE : do_intr ? CMDSTS_INTR : 0); - cmdsts |= (desc == first_desc) ? 0 : CMDSTS_OWN; - cmdsts |= len; - desc[DESC_CMDSTS] = cpu_to_le32(cmdsts); - - if (!nr_frags) - break; - - buf = pci_map_page(dev->pci_dev, frag->page, - frag->page_offset, - frag->size, PCI_DMA_TODEVICE); - dprintk("frag: buf=%08Lx page=%08lx offset=%08lx\n", - (long long)buf, (long) page_to_pfn(frag->page), - frag->page_offset); - len = frag->size; - frag++; - nr_frags--; - } - dprintk("done pkt\n"); - - spin_lock_irq(&dev->tx_lock); - dev->tx_skbs[last_idx] = skb; - first_desc[DESC_CMDSTS] |= cpu_to_le32(CMDSTS_OWN); - dev->tx_free_idx = free_idx; - atomic_inc(&dev->nr_tx_skbs); - spin_unlock_irq(&dev->tx_lock); - - kick_tx(dev); - - /* Check again: we may have raced with a tx done irq */ - if (stopped && (dev->tx_done_idx != tx_done_idx) && start_tx_okay(dev)) - netif_start_queue(ndev); - - return NETDEV_TX_OK; -} - -static void ns83820_update_stats(struct ns83820 *dev) -{ - struct net_device *ndev = dev->ndev; - u8 __iomem *base = dev->base; - - /* the DP83820 will freeze counters, so we need to read all of them */ - ndev->stats.rx_errors += readl(base + 0x60) & 0xffff; - ndev->stats.rx_crc_errors += readl(base + 0x64) & 0xffff; - ndev->stats.rx_missed_errors += readl(base + 0x68) & 0xffff; - ndev->stats.rx_frame_errors += readl(base + 0x6c) & 0xffff; - /*ndev->stats.rx_symbol_errors +=*/ readl(base + 0x70); - ndev->stats.rx_length_errors += readl(base + 0x74) & 0xffff; - ndev->stats.rx_length_errors += readl(base + 0x78) & 0xffff; - /*ndev->stats.rx_badopcode_errors += */ readl(base + 0x7c); - /*ndev->stats.rx_pause_count += */ readl(base + 0x80); - /*ndev->stats.tx_pause_count += */ readl(base + 0x84); - ndev->stats.tx_carrier_errors += readl(base + 0x88) & 0xff; -} - -static struct net_device_stats *ns83820_get_stats(struct net_device *ndev) -{ - struct ns83820 *dev = PRIV(ndev); - - /* somewhat overkill */ - spin_lock_irq(&dev->misc_lock); - ns83820_update_stats(dev); - spin_unlock_irq(&dev->misc_lock); - - return &ndev->stats; -} - -/* Let ethtool retrieve info */ -static int ns83820_get_settings(struct net_device *ndev, - struct ethtool_cmd *cmd) -{ - struct ns83820 *dev = PRIV(ndev); - u32 cfg, tanar, tbicr; - int fullduplex = 0; - - /* - * Here's the list of available ethtool commands from other drivers: - * cmd->advertising = - * ethtool_cmd_speed_set(cmd, ...) - * cmd->duplex = - * cmd->port = 0; - * cmd->phy_address = - * cmd->transceiver = 0; - * cmd->autoneg = - * cmd->maxtxpkt = 0; - * cmd->maxrxpkt = 0; - */ - - /* read current configuration */ - cfg = readl(dev->base + CFG) ^ SPDSTS_POLARITY; - tanar = readl(dev->base + TANAR); - tbicr = readl(dev->base + TBICR); - - fullduplex = (cfg & CFG_DUPSTS) ? 1 : 0; - - cmd->supported = SUPPORTED_Autoneg; - - if (dev->CFG_cache & CFG_TBI_EN) { - /* we have optical interface */ - cmd->supported |= SUPPORTED_1000baseT_Half | - SUPPORTED_1000baseT_Full | - SUPPORTED_FIBRE; - cmd->port = PORT_FIBRE; - } else { - /* we have copper */ - cmd->supported |= SUPPORTED_10baseT_Half | - SUPPORTED_10baseT_Full | SUPPORTED_100baseT_Half | - SUPPORTED_100baseT_Full | SUPPORTED_1000baseT_Half | - SUPPORTED_1000baseT_Full | - SUPPORTED_MII; - cmd->port = PORT_MII; - } - - cmd->duplex = fullduplex ? DUPLEX_FULL : DUPLEX_HALF; - switch (cfg / CFG_SPDSTS0 & 3) { - case 2: - ethtool_cmd_speed_set(cmd, SPEED_1000); - break; - case 1: - ethtool_cmd_speed_set(cmd, SPEED_100); - break; - default: - ethtool_cmd_speed_set(cmd, SPEED_10); - break; - } - cmd->autoneg = (tbicr & TBICR_MR_AN_ENABLE) - ? AUTONEG_ENABLE : AUTONEG_DISABLE; - return 0; -} - -/* Let ethool change settings*/ -static int ns83820_set_settings(struct net_device *ndev, - struct ethtool_cmd *cmd) -{ - struct ns83820 *dev = PRIV(ndev); - u32 cfg, tanar; - int have_optical = 0; - int fullduplex = 0; - - /* read current configuration */ - cfg = readl(dev->base + CFG) ^ SPDSTS_POLARITY; - tanar = readl(dev->base + TANAR); - - if (dev->CFG_cache & CFG_TBI_EN) { - /* we have optical */ - have_optical = 1; - fullduplex = (tanar & TANAR_FULL_DUP); - - } else { - /* we have copper */ - fullduplex = cfg & CFG_DUPSTS; - } - - spin_lock_irq(&dev->misc_lock); - spin_lock(&dev->tx_lock); - - /* Set duplex */ - if (cmd->duplex != fullduplex) { - if (have_optical) { - /*set full duplex*/ - if (cmd->duplex == DUPLEX_FULL) { - /* force full duplex */ - writel(readl(dev->base + TXCFG) - | TXCFG_CSI | TXCFG_HBI | TXCFG_ATP, - dev->base + TXCFG); - writel(readl(dev->base + RXCFG) | RXCFG_RX_FD, - dev->base + RXCFG); - /* Light up full duplex LED */ - writel(readl(dev->base + GPIOR) | GPIOR_GP1_OUT, - dev->base + GPIOR); - } else { - /*TODO: set half duplex */ - } - - } else { - /*we have copper*/ - /* TODO: Set duplex for copper cards */ - } - printk(KERN_INFO "%s: Duplex set via ethtool\n", - ndev->name); - } - - /* Set autonegotiation */ - if (1) { - if (cmd->autoneg == AUTONEG_ENABLE) { - /* restart auto negotiation */ - writel(TBICR_MR_AN_ENABLE | TBICR_MR_RESTART_AN, - dev->base + TBICR); - writel(TBICR_MR_AN_ENABLE, dev->base + TBICR); - dev->linkstate = LINK_AUTONEGOTIATE; - - printk(KERN_INFO "%s: autoneg enabled via ethtool\n", - ndev->name); - } else { - /* disable auto negotiation */ - writel(0x00000000, dev->base + TBICR); - } - - printk(KERN_INFO "%s: autoneg %s via ethtool\n", ndev->name, - cmd->autoneg ? "ENABLED" : "DISABLED"); - } - - phy_intr(ndev); - spin_unlock(&dev->tx_lock); - spin_unlock_irq(&dev->misc_lock); - - return 0; -} -/* end ethtool get/set support -df */ - -static void ns83820_get_drvinfo(struct net_device *ndev, struct ethtool_drvinfo *info) -{ - struct ns83820 *dev = PRIV(ndev); - strcpy(info->driver, "ns83820"); - strcpy(info->version, VERSION); - strcpy(info->bus_info, pci_name(dev->pci_dev)); -} - -static u32 ns83820_get_link(struct net_device *ndev) -{ - struct ns83820 *dev = PRIV(ndev); - u32 cfg = readl(dev->base + CFG) ^ SPDSTS_POLARITY; - return cfg & CFG_LNKSTS ? 1 : 0; -} - -static const struct ethtool_ops ops = { - .get_settings = ns83820_get_settings, - .set_settings = ns83820_set_settings, - .get_drvinfo = ns83820_get_drvinfo, - .get_link = ns83820_get_link -}; - -static inline void ns83820_disable_interrupts(struct ns83820 *dev) -{ - writel(0, dev->base + IMR); - writel(0, dev->base + IER); - readl(dev->base + IER); -} - -/* this function is called in irq context from the ISR */ -static void ns83820_mib_isr(struct ns83820 *dev) -{ - unsigned long flags; - spin_lock_irqsave(&dev->misc_lock, flags); - ns83820_update_stats(dev); - spin_unlock_irqrestore(&dev->misc_lock, flags); -} - -static void ns83820_do_isr(struct net_device *ndev, u32 isr); -static irqreturn_t ns83820_irq(int foo, void *data) -{ - struct net_device *ndev = data; - struct ns83820 *dev = PRIV(ndev); - u32 isr; - dprintk("ns83820_irq(%p)\n", ndev); - - dev->ihr = 0; - - isr = readl(dev->base + ISR); - dprintk("irq: %08x\n", isr); - ns83820_do_isr(ndev, isr); - return IRQ_HANDLED; -} - -static void ns83820_do_isr(struct net_device *ndev, u32 isr) -{ - struct ns83820 *dev = PRIV(ndev); - unsigned long flags; - -#ifdef DEBUG - if (isr & ~(ISR_PHY | ISR_RXDESC | ISR_RXEARLY | ISR_RXOK | ISR_RXERR | ISR_TXIDLE | ISR_TXOK | ISR_TXDESC)) - Dprintk("odd isr? 0x%08x\n", isr); -#endif - - if (ISR_RXIDLE & isr) { - dev->rx_info.idle = 1; - Dprintk("oh dear, we are idle\n"); - ns83820_rx_kick(ndev); - } - - if ((ISR_RXDESC | ISR_RXOK) & isr) { - prefetch(dev->rx_info.next_rx_desc); - - spin_lock_irqsave(&dev->misc_lock, flags); - dev->IMR_cache &= ~(ISR_RXDESC | ISR_RXOK); - writel(dev->IMR_cache, dev->base + IMR); - spin_unlock_irqrestore(&dev->misc_lock, flags); - - tasklet_schedule(&dev->rx_tasklet); - //rx_irq(ndev); - //writel(4, dev->base + IHR); - } - - if ((ISR_RXIDLE | ISR_RXORN | ISR_RXDESC | ISR_RXOK | ISR_RXERR) & isr) - ns83820_rx_kick(ndev); - - if (unlikely(ISR_RXSOVR & isr)) { - //printk("overrun: rxsovr\n"); - ndev->stats.rx_fifo_errors++; - } - - if (unlikely(ISR_RXORN & isr)) { - //printk("overrun: rxorn\n"); - ndev->stats.rx_fifo_errors++; - } - - if ((ISR_RXRCMP & isr) && dev->rx_info.up) - writel(CR_RXE, dev->base + CR); - - if (ISR_TXIDLE & isr) { - u32 txdp; - txdp = readl(dev->base + TXDP); - dprintk("txdp: %08x\n", txdp); - txdp -= dev->tx_phy_descs; - dev->tx_idx = txdp / (DESC_SIZE * 4); - if (dev->tx_idx >= NR_TX_DESC) { - printk(KERN_ALERT "%s: BUG -- txdp out of range\n", ndev->name); - dev->tx_idx = 0; - } - /* The may have been a race between a pci originated read - * and the descriptor update from the cpu. Just in case, - * kick the transmitter if the hardware thinks it is on a - * different descriptor than we are. - */ - if (dev->tx_idx != dev->tx_free_idx) - kick_tx(dev); - } - - /* Defer tx ring processing until more than a minimum amount of - * work has accumulated - */ - if ((ISR_TXDESC | ISR_TXIDLE | ISR_TXOK | ISR_TXERR) & isr) { - spin_lock_irqsave(&dev->tx_lock, flags); - do_tx_done(ndev); - spin_unlock_irqrestore(&dev->tx_lock, flags); - - /* Disable TxOk if there are no outstanding tx packets. - */ - if ((dev->tx_done_idx == dev->tx_free_idx) && - (dev->IMR_cache & ISR_TXOK)) { - spin_lock_irqsave(&dev->misc_lock, flags); - dev->IMR_cache &= ~ISR_TXOK; - writel(dev->IMR_cache, dev->base + IMR); - spin_unlock_irqrestore(&dev->misc_lock, flags); - } - } - - /* The TxIdle interrupt can come in before the transmit has - * completed. Normally we reap packets off of the combination - * of TxDesc and TxIdle and leave TxOk disabled (since it - * occurs on every packet), but when no further irqs of this - * nature are expected, we must enable TxOk. - */ - if ((ISR_TXIDLE & isr) && (dev->tx_done_idx != dev->tx_free_idx)) { - spin_lock_irqsave(&dev->misc_lock, flags); - dev->IMR_cache |= ISR_TXOK; - writel(dev->IMR_cache, dev->base + IMR); - spin_unlock_irqrestore(&dev->misc_lock, flags); - } - - /* MIB interrupt: one of the statistics counters is about to overflow */ - if (unlikely(ISR_MIB & isr)) - ns83820_mib_isr(dev); - - /* PHY: Link up/down/negotiation state change */ - if (unlikely(ISR_PHY & isr)) - phy_intr(ndev); - -#if 0 /* Still working on the interrupt mitigation strategy */ - if (dev->ihr) - writel(dev->ihr, dev->base + IHR); -#endif -} - -static void ns83820_do_reset(struct ns83820 *dev, u32 which) -{ - Dprintk("resetting chip...\n"); - writel(which, dev->base + CR); - do { - schedule(); - } while (readl(dev->base + CR) & which); - Dprintk("okay!\n"); -} - -static int ns83820_stop(struct net_device *ndev) -{ - struct ns83820 *dev = PRIV(ndev); - - /* FIXME: protect against interrupt handler? */ - del_timer_sync(&dev->tx_watchdog); - - ns83820_disable_interrupts(dev); - - dev->rx_info.up = 0; - synchronize_irq(dev->pci_dev->irq); - - ns83820_do_reset(dev, CR_RST); - - synchronize_irq(dev->pci_dev->irq); - - spin_lock_irq(&dev->misc_lock); - dev->IMR_cache &= ~(ISR_TXURN | ISR_TXIDLE | ISR_TXERR | ISR_TXDESC | ISR_TXOK); - spin_unlock_irq(&dev->misc_lock); - - ns83820_cleanup_rx(dev); - ns83820_cleanup_tx(dev); - - return 0; -} - -static void ns83820_tx_timeout(struct net_device *ndev) -{ - struct ns83820 *dev = PRIV(ndev); - u32 tx_done_idx; - __le32 *desc; - unsigned long flags; - - spin_lock_irqsave(&dev->tx_lock, flags); - - tx_done_idx = dev->tx_done_idx; - desc = dev->tx_descs + (tx_done_idx * DESC_SIZE); - - printk(KERN_INFO "%s: tx_timeout: tx_done_idx=%d free_idx=%d cmdsts=%08x\n", - ndev->name, - tx_done_idx, dev->tx_free_idx, le32_to_cpu(desc[DESC_CMDSTS])); - -#if defined(DEBUG) - { - u32 isr; - isr = readl(dev->base + ISR); - printk("irq: %08x imr: %08x\n", isr, dev->IMR_cache); - ns83820_do_isr(ndev, isr); - } -#endif - - do_tx_done(ndev); - - tx_done_idx = dev->tx_done_idx; - desc = dev->tx_descs + (tx_done_idx * DESC_SIZE); - - printk(KERN_INFO "%s: after: tx_done_idx=%d free_idx=%d cmdsts=%08x\n", - ndev->name, - tx_done_idx, dev->tx_free_idx, le32_to_cpu(desc[DESC_CMDSTS])); - - spin_unlock_irqrestore(&dev->tx_lock, flags); -} - -static void ns83820_tx_watch(unsigned long data) -{ - struct net_device *ndev = (void *)data; - struct ns83820 *dev = PRIV(ndev); - -#if defined(DEBUG) - printk("ns83820_tx_watch: %u %u %d\n", - dev->tx_done_idx, dev->tx_free_idx, atomic_read(&dev->nr_tx_skbs) - ); -#endif - - if (time_after(jiffies, dev_trans_start(ndev) + 1*HZ) && - dev->tx_done_idx != dev->tx_free_idx) { - printk(KERN_DEBUG "%s: ns83820_tx_watch: %u %u %d\n", - ndev->name, - dev->tx_done_idx, dev->tx_free_idx, - atomic_read(&dev->nr_tx_skbs)); - ns83820_tx_timeout(ndev); - } - - mod_timer(&dev->tx_watchdog, jiffies + 2*HZ); -} - -static int ns83820_open(struct net_device *ndev) -{ - struct ns83820 *dev = PRIV(ndev); - unsigned i; - u32 desc; - int ret; - - dprintk("ns83820_open\n"); - - writel(0, dev->base + PQCR); - - ret = ns83820_setup_rx(ndev); - if (ret) - goto failed; - - memset(dev->tx_descs, 0, 4 * NR_TX_DESC * DESC_SIZE); - for (i=0; itx_descs[(i * DESC_SIZE) + DESC_LINK] - = cpu_to_le32( - dev->tx_phy_descs - + ((i+1) % NR_TX_DESC) * DESC_SIZE * 4); - } - - dev->tx_idx = 0; - dev->tx_done_idx = 0; - desc = dev->tx_phy_descs; - writel(0, dev->base + TXDP_HI); - writel(desc, dev->base + TXDP); - - init_timer(&dev->tx_watchdog); - dev->tx_watchdog.data = (unsigned long)ndev; - dev->tx_watchdog.function = ns83820_tx_watch; - mod_timer(&dev->tx_watchdog, jiffies + 2*HZ); - - netif_start_queue(ndev); /* FIXME: wait for phy to come up */ - - return 0; - -failed: - ns83820_stop(ndev); - return ret; -} - -static void ns83820_getmac(struct ns83820 *dev, u8 *mac) -{ - unsigned i; - for (i=0; i<3; i++) { - u32 data; - - /* Read from the perfect match memory: this is loaded by - * the chip from the EEPROM via the EELOAD self test. - */ - writel(i*2, dev->base + RFCR); - data = readl(dev->base + RFDR); - - *mac++ = data; - *mac++ = data >> 8; - } -} - -static int ns83820_change_mtu(struct net_device *ndev, int new_mtu) -{ - if (new_mtu > RX_BUF_SIZE) - return -EINVAL; - ndev->mtu = new_mtu; - return 0; -} - -static void ns83820_set_multicast(struct net_device *ndev) -{ - struct ns83820 *dev = PRIV(ndev); - u8 __iomem *rfcr = dev->base + RFCR; - u32 and_mask = 0xffffffff; - u32 or_mask = 0; - u32 val; - - if (ndev->flags & IFF_PROMISC) - or_mask |= RFCR_AAU | RFCR_AAM; - else - and_mask &= ~(RFCR_AAU | RFCR_AAM); - - if (ndev->flags & IFF_ALLMULTI || netdev_mc_count(ndev)) - or_mask |= RFCR_AAM; - else - and_mask &= ~RFCR_AAM; - - spin_lock_irq(&dev->misc_lock); - val = (readl(rfcr) & and_mask) | or_mask; - /* Ramit : RFCR Write Fix doc says RFEN must be 0 modify other bits */ - writel(val & ~RFCR_RFEN, rfcr); - writel(val, rfcr); - spin_unlock_irq(&dev->misc_lock); -} - -static void ns83820_run_bist(struct net_device *ndev, const char *name, u32 enable, u32 done, u32 fail) -{ - struct ns83820 *dev = PRIV(ndev); - int timed_out = 0; - unsigned long start; - u32 status; - int loops = 0; - - dprintk("%s: start %s\n", ndev->name, name); - - start = jiffies; - - writel(enable, dev->base + PTSCR); - for (;;) { - loops++; - status = readl(dev->base + PTSCR); - if (!(status & enable)) - break; - if (status & done) - break; - if (status & fail) - break; - if (time_after_eq(jiffies, start + HZ)) { - timed_out = 1; - break; - } - schedule_timeout_uninterruptible(1); - } - - if (status & fail) - printk(KERN_INFO "%s: %s failed! (0x%08x & 0x%08x)\n", - ndev->name, name, status, fail); - else if (timed_out) - printk(KERN_INFO "%s: run_bist %s timed out! (%08x)\n", - ndev->name, name, status); - - dprintk("%s: done %s in %d loops\n", ndev->name, name, loops); -} - -#ifdef PHY_CODE_IS_FINISHED -static void ns83820_mii_write_bit(struct ns83820 *dev, int bit) -{ - /* drive MDC low */ - dev->MEAR_cache &= ~MEAR_MDC; - writel(dev->MEAR_cache, dev->base + MEAR); - readl(dev->base + MEAR); - - /* enable output, set bit */ - dev->MEAR_cache |= MEAR_MDDIR; - if (bit) - dev->MEAR_cache |= MEAR_MDIO; - else - dev->MEAR_cache &= ~MEAR_MDIO; - - /* set the output bit */ - writel(dev->MEAR_cache, dev->base + MEAR); - readl(dev->base + MEAR); - - /* Wait. Max clock rate is 2.5MHz, this way we come in under 1MHz */ - udelay(1); - - /* drive MDC high causing the data bit to be latched */ - dev->MEAR_cache |= MEAR_MDC; - writel(dev->MEAR_cache, dev->base + MEAR); - readl(dev->base + MEAR); - - /* Wait again... */ - udelay(1); -} - -static int ns83820_mii_read_bit(struct ns83820 *dev) -{ - int bit; - - /* drive MDC low, disable output */ - dev->MEAR_cache &= ~MEAR_MDC; - dev->MEAR_cache &= ~MEAR_MDDIR; - writel(dev->MEAR_cache, dev->base + MEAR); - readl(dev->base + MEAR); - - /* Wait. Max clock rate is 2.5MHz, this way we come in under 1MHz */ - udelay(1); - - /* drive MDC high causing the data bit to be latched */ - bit = (readl(dev->base + MEAR) & MEAR_MDIO) ? 1 : 0; - dev->MEAR_cache |= MEAR_MDC; - writel(dev->MEAR_cache, dev->base + MEAR); - - /* Wait again... */ - udelay(1); - - return bit; -} - -static unsigned ns83820_mii_read_reg(struct ns83820 *dev, unsigned phy, unsigned reg) -{ - unsigned data = 0; - int i; - - /* read some garbage so that we eventually sync up */ - for (i=0; i<64; i++) - ns83820_mii_read_bit(dev); - - ns83820_mii_write_bit(dev, 0); /* start */ - ns83820_mii_write_bit(dev, 1); - ns83820_mii_write_bit(dev, 1); /* opcode read */ - ns83820_mii_write_bit(dev, 0); - - /* write out the phy address: 5 bits, msb first */ - for (i=0; i<5; i++) - ns83820_mii_write_bit(dev, phy & (0x10 >> i)); - - /* write out the register address, 5 bits, msb first */ - for (i=0; i<5; i++) - ns83820_mii_write_bit(dev, reg & (0x10 >> i)); - - ns83820_mii_read_bit(dev); /* turn around cycles */ - ns83820_mii_read_bit(dev); - - /* read in the register data, 16 bits msb first */ - for (i=0; i<16; i++) { - data <<= 1; - data |= ns83820_mii_read_bit(dev); - } - - return data; -} - -static unsigned ns83820_mii_write_reg(struct ns83820 *dev, unsigned phy, unsigned reg, unsigned data) -{ - int i; - - /* read some garbage so that we eventually sync up */ - for (i=0; i<64; i++) - ns83820_mii_read_bit(dev); - - ns83820_mii_write_bit(dev, 0); /* start */ - ns83820_mii_write_bit(dev, 1); - ns83820_mii_write_bit(dev, 0); /* opcode read */ - ns83820_mii_write_bit(dev, 1); - - /* write out the phy address: 5 bits, msb first */ - for (i=0; i<5; i++) - ns83820_mii_write_bit(dev, phy & (0x10 >> i)); - - /* write out the register address, 5 bits, msb first */ - for (i=0; i<5; i++) - ns83820_mii_write_bit(dev, reg & (0x10 >> i)); - - ns83820_mii_read_bit(dev); /* turn around cycles */ - ns83820_mii_read_bit(dev); - - /* read in the register data, 16 bits msb first */ - for (i=0; i<16; i++) - ns83820_mii_write_bit(dev, (data >> (15 - i)) & 1); - - return data; -} - -static void ns83820_probe_phy(struct net_device *ndev) -{ - struct ns83820 *dev = PRIV(ndev); - static int first; - int i; -#define MII_PHYIDR1 0x02 -#define MII_PHYIDR2 0x03 - -#if 0 - if (!first) { - unsigned tmp; - ns83820_mii_read_reg(dev, 1, 0x09); - ns83820_mii_write_reg(dev, 1, 0x10, 0x0d3e); - - tmp = ns83820_mii_read_reg(dev, 1, 0x00); - ns83820_mii_write_reg(dev, 1, 0x00, tmp | 0x8000); - udelay(1300); - ns83820_mii_read_reg(dev, 1, 0x09); - } -#endif - first = 1; - - for (i=1; i<2; i++) { - int j; - unsigned a, b; - a = ns83820_mii_read_reg(dev, i, MII_PHYIDR1); - b = ns83820_mii_read_reg(dev, i, MII_PHYIDR2); - - //printk("%s: phy %d: 0x%04x 0x%04x\n", - // ndev->name, i, a, b); - - for (j=0; j<0x16; j+=4) { - dprintk("%s: [0x%02x] %04x %04x %04x %04x\n", - ndev->name, j, - ns83820_mii_read_reg(dev, i, 0 + j), - ns83820_mii_read_reg(dev, i, 1 + j), - ns83820_mii_read_reg(dev, i, 2 + j), - ns83820_mii_read_reg(dev, i, 3 + j) - ); - } - } - { - unsigned a, b; - /* read firmware version: memory addr is 0x8402 and 0x8403 */ - ns83820_mii_write_reg(dev, 1, 0x16, 0x000d); - ns83820_mii_write_reg(dev, 1, 0x1e, 0x810e); - a = ns83820_mii_read_reg(dev, 1, 0x1d); - - ns83820_mii_write_reg(dev, 1, 0x16, 0x000d); - ns83820_mii_write_reg(dev, 1, 0x1e, 0x810e); - b = ns83820_mii_read_reg(dev, 1, 0x1d); - dprintk("version: 0x%04x 0x%04x\n", a, b); - } -} -#endif - -static const struct net_device_ops netdev_ops = { - .ndo_open = ns83820_open, - .ndo_stop = ns83820_stop, - .ndo_start_xmit = ns83820_hard_start_xmit, - .ndo_get_stats = ns83820_get_stats, - .ndo_change_mtu = ns83820_change_mtu, - .ndo_set_multicast_list = ns83820_set_multicast, - .ndo_validate_addr = eth_validate_addr, - .ndo_set_mac_address = eth_mac_addr, - .ndo_tx_timeout = ns83820_tx_timeout, -}; - -static int __devinit ns83820_init_one(struct pci_dev *pci_dev, - const struct pci_device_id *id) -{ - struct net_device *ndev; - struct ns83820 *dev; - long addr; - int err; - int using_dac = 0; - - /* See if we can set the dma mask early on; failure is fatal. */ - if (sizeof(dma_addr_t) == 8 && - !pci_set_dma_mask(pci_dev, DMA_BIT_MASK(64))) { - using_dac = 1; - } else if (!pci_set_dma_mask(pci_dev, DMA_BIT_MASK(32))) { - using_dac = 0; - } else { - dev_warn(&pci_dev->dev, "pci_set_dma_mask failed!\n"); - return -ENODEV; - } - - ndev = alloc_etherdev(sizeof(struct ns83820)); - err = -ENOMEM; - if (!ndev) - goto out; - - dev = PRIV(ndev); - dev->ndev = ndev; - - spin_lock_init(&dev->rx_info.lock); - spin_lock_init(&dev->tx_lock); - spin_lock_init(&dev->misc_lock); - dev->pci_dev = pci_dev; - - SET_NETDEV_DEV(ndev, &pci_dev->dev); - - INIT_WORK(&dev->tq_refill, queue_refill); - tasklet_init(&dev->rx_tasklet, rx_action, (unsigned long)ndev); - - err = pci_enable_device(pci_dev); - if (err) { - dev_info(&pci_dev->dev, "pci_enable_dev failed: %d\n", err); - goto out_free; - } - - pci_set_master(pci_dev); - addr = pci_resource_start(pci_dev, 1); - dev->base = ioremap_nocache(addr, PAGE_SIZE); - dev->tx_descs = pci_alloc_consistent(pci_dev, - 4 * DESC_SIZE * NR_TX_DESC, &dev->tx_phy_descs); - dev->rx_info.descs = pci_alloc_consistent(pci_dev, - 4 * DESC_SIZE * NR_RX_DESC, &dev->rx_info.phy_descs); - err = -ENOMEM; - if (!dev->base || !dev->tx_descs || !dev->rx_info.descs) - goto out_disable; - - dprintk("%p: %08lx %p: %08lx\n", - dev->tx_descs, (long)dev->tx_phy_descs, - dev->rx_info.descs, (long)dev->rx_info.phy_descs); - - ns83820_disable_interrupts(dev); - - dev->IMR_cache = 0; - - err = request_irq(pci_dev->irq, ns83820_irq, IRQF_SHARED, - DRV_NAME, ndev); - if (err) { - dev_info(&pci_dev->dev, "unable to register irq %d, err %d\n", - pci_dev->irq, err); - goto out_disable; - } - - /* - * FIXME: we are holding rtnl_lock() over obscenely long area only - * because some of the setup code uses dev->name. It's Wrong(tm) - - * we should be using driver-specific names for all that stuff. - * For now that will do, but we really need to come back and kill - * most of the dev_alloc_name() users later. - */ - rtnl_lock(); - err = dev_alloc_name(ndev, ndev->name); - if (err < 0) { - dev_info(&pci_dev->dev, "unable to get netdev name: %d\n", err); - goto out_free_irq; - } - - printk("%s: ns83820.c: 0x22c: %08x, subsystem: %04x:%04x\n", - ndev->name, le32_to_cpu(readl(dev->base + 0x22c)), - pci_dev->subsystem_vendor, pci_dev->subsystem_device); - - ndev->netdev_ops = &netdev_ops; - SET_ETHTOOL_OPS(ndev, &ops); - ndev->watchdog_timeo = 5 * HZ; - pci_set_drvdata(pci_dev, ndev); - - ns83820_do_reset(dev, CR_RST); - - /* Must reset the ram bist before running it */ - writel(PTSCR_RBIST_RST, dev->base + PTSCR); - ns83820_run_bist(ndev, "sram bist", PTSCR_RBIST_EN, - PTSCR_RBIST_DONE, PTSCR_RBIST_FAIL); - ns83820_run_bist(ndev, "eeprom bist", PTSCR_EEBIST_EN, 0, - PTSCR_EEBIST_FAIL); - ns83820_run_bist(ndev, "eeprom load", PTSCR_EELOAD_EN, 0, 0); - - /* I love config registers */ - dev->CFG_cache = readl(dev->base + CFG); - - if ((dev->CFG_cache & CFG_PCI64_DET)) { - printk(KERN_INFO "%s: detected 64 bit PCI data bus.\n", - ndev->name); - /*dev->CFG_cache |= CFG_DATA64_EN;*/ - if (!(dev->CFG_cache & CFG_DATA64_EN)) - printk(KERN_INFO "%s: EEPROM did not enable 64 bit bus. Disabled.\n", - ndev->name); - } else - dev->CFG_cache &= ~(CFG_DATA64_EN); - - dev->CFG_cache &= (CFG_TBI_EN | CFG_MRM_DIS | CFG_MWI_DIS | - CFG_T64ADDR | CFG_DATA64_EN | CFG_EXT_125 | - CFG_M64ADDR); - dev->CFG_cache |= CFG_PINT_DUPSTS | CFG_PINT_LNKSTS | CFG_PINT_SPDSTS | - CFG_EXTSTS_EN | CFG_EXD | CFG_PESEL; - dev->CFG_cache |= CFG_REQALG; - dev->CFG_cache |= CFG_POW; - dev->CFG_cache |= CFG_TMRTEST; - - /* When compiled with 64 bit addressing, we must always enable - * the 64 bit descriptor format. - */ - if (sizeof(dma_addr_t) == 8) - dev->CFG_cache |= CFG_M64ADDR; - if (using_dac) - dev->CFG_cache |= CFG_T64ADDR; - - /* Big endian mode does not seem to do what the docs suggest */ - dev->CFG_cache &= ~CFG_BEM; - - /* setup optical transceiver if we have one */ - if (dev->CFG_cache & CFG_TBI_EN) { - printk(KERN_INFO "%s: enabling optical transceiver\n", - ndev->name); - writel(readl(dev->base + GPIOR) | 0x3e8, dev->base + GPIOR); - - /* setup auto negotiation feature advertisement */ - writel(readl(dev->base + TANAR) - | TANAR_HALF_DUP | TANAR_FULL_DUP, - dev->base + TANAR); - - /* start auto negotiation */ - writel(TBICR_MR_AN_ENABLE | TBICR_MR_RESTART_AN, - dev->base + TBICR); - writel(TBICR_MR_AN_ENABLE, dev->base + TBICR); - dev->linkstate = LINK_AUTONEGOTIATE; - - dev->CFG_cache |= CFG_MODE_1000; - } - - writel(dev->CFG_cache, dev->base + CFG); - dprintk("CFG: %08x\n", dev->CFG_cache); - - if (reset_phy) { - printk(KERN_INFO "%s: resetting phy\n", ndev->name); - writel(dev->CFG_cache | CFG_PHY_RST, dev->base + CFG); - msleep(10); - writel(dev->CFG_cache, dev->base + CFG); - } - -#if 0 /* Huh? This sets the PCI latency register. Should be done via - * the PCI layer. FIXME. - */ - if (readl(dev->base + SRR)) - writel(readl(dev->base+0x20c) | 0xfe00, dev->base + 0x20c); -#endif - - /* Note! The DMA burst size interacts with packet - * transmission, such that the largest packet that - * can be transmitted is 8192 - FLTH - burst size. - * If only the transmit fifo was larger... - */ - /* Ramit : 1024 DMA is not a good idea, it ends up banging - * some DELL and COMPAQ SMP systems */ - writel(TXCFG_CSI | TXCFG_HBI | TXCFG_ATP | TXCFG_MXDMA512 - | ((1600 / 32) * 0x100), - dev->base + TXCFG); - - /* Flush the interrupt holdoff timer */ - writel(0x000, dev->base + IHR); - writel(0x100, dev->base + IHR); - writel(0x000, dev->base + IHR); - - /* Set Rx to full duplex, don't accept runt, errored, long or length - * range errored packets. Use 512 byte DMA. - */ - /* Ramit : 1024 DMA is not a good idea, it ends up banging - * some DELL and COMPAQ SMP systems - * Turn on ALP, only we are accpeting Jumbo Packets */ - writel(RXCFG_AEP | RXCFG_ARP | RXCFG_AIRL | RXCFG_RX_FD - | RXCFG_STRIPCRC - //| RXCFG_ALP - | (RXCFG_MXDMA512) | 0, dev->base + RXCFG); - - /* Disable priority queueing */ - writel(0, dev->base + PQCR); - - /* Enable IP checksum validation and detetion of VLAN headers. - * Note: do not set the reject options as at least the 0x102 - * revision of the chip does not properly accept IP fragments - * at least for UDP. - */ - /* Ramit : Be sure to turn on RXCFG_ARP if VLAN's are enabled, since - * the MAC it calculates the packetsize AFTER stripping the VLAN - * header, and if a VLAN Tagged packet of 64 bytes is received (like - * a ping with a VLAN header) then the card, strips the 4 byte VLAN - * tag and then checks the packet size, so if RXCFG_ARP is not enabled, - * it discrards it!. These guys...... - * also turn on tag stripping if hardware acceleration is enabled - */ -#ifdef NS83820_VLAN_ACCEL_SUPPORT -#define VRCR_INIT_VALUE (VRCR_IPEN|VRCR_VTDEN|VRCR_VTREN) -#else -#define VRCR_INIT_VALUE (VRCR_IPEN|VRCR_VTDEN) -#endif - writel(VRCR_INIT_VALUE, dev->base + VRCR); - - /* Enable per-packet TCP/UDP/IP checksumming - * and per packet vlan tag insertion if - * vlan hardware acceleration is enabled - */ -#ifdef NS83820_VLAN_ACCEL_SUPPORT -#define VTCR_INIT_VALUE (VTCR_PPCHK|VTCR_VPPTI) -#else -#define VTCR_INIT_VALUE VTCR_PPCHK -#endif - writel(VTCR_INIT_VALUE, dev->base + VTCR); - - /* Ramit : Enable async and sync pause frames */ - /* writel(0, dev->base + PCR); */ - writel((PCR_PS_MCAST | PCR_PS_DA | PCR_PSEN | PCR_FFLO_4K | - PCR_FFHI_8K | PCR_STLO_4 | PCR_STHI_8 | PCR_PAUSE_CNT), - dev->base + PCR); - - /* Disable Wake On Lan */ - writel(0, dev->base + WCSR); - - ns83820_getmac(dev, ndev->dev_addr); - - /* Yes, we support dumb IP checksum on transmit */ - ndev->features |= NETIF_F_SG; - ndev->features |= NETIF_F_IP_CSUM; - -#ifdef NS83820_VLAN_ACCEL_SUPPORT - /* We also support hardware vlan acceleration */ - ndev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; -#endif - - if (using_dac) { - printk(KERN_INFO "%s: using 64 bit addressing.\n", - ndev->name); - ndev->features |= NETIF_F_HIGHDMA; - } - - printk(KERN_INFO "%s: ns83820 v" VERSION ": DP83820 v%u.%u: %pM io=0x%08lx irq=%d f=%s\n", - ndev->name, - (unsigned)readl(dev->base + SRR) >> 8, - (unsigned)readl(dev->base + SRR) & 0xff, - ndev->dev_addr, addr, pci_dev->irq, - (ndev->features & NETIF_F_HIGHDMA) ? "h,sg" : "sg" - ); - -#ifdef PHY_CODE_IS_FINISHED - ns83820_probe_phy(ndev); -#endif - - err = register_netdevice(ndev); - if (err) { - printk(KERN_INFO "ns83820: unable to register netdev: %d\n", err); - goto out_cleanup; - } - rtnl_unlock(); - - return 0; - -out_cleanup: - ns83820_disable_interrupts(dev); /* paranoia */ -out_free_irq: - rtnl_unlock(); - free_irq(pci_dev->irq, ndev); -out_disable: - if (dev->base) - iounmap(dev->base); - pci_free_consistent(pci_dev, 4 * DESC_SIZE * NR_TX_DESC, dev->tx_descs, dev->tx_phy_descs); - pci_free_consistent(pci_dev, 4 * DESC_SIZE * NR_RX_DESC, dev->rx_info.descs, dev->rx_info.phy_descs); - pci_disable_device(pci_dev); -out_free: - free_netdev(ndev); - pci_set_drvdata(pci_dev, NULL); -out: - return err; -} - -static void __devexit ns83820_remove_one(struct pci_dev *pci_dev) -{ - struct net_device *ndev = pci_get_drvdata(pci_dev); - struct ns83820 *dev = PRIV(ndev); /* ok even if NULL */ - - if (!ndev) /* paranoia */ - return; - - ns83820_disable_interrupts(dev); /* paranoia */ - - unregister_netdev(ndev); - free_irq(dev->pci_dev->irq, ndev); - iounmap(dev->base); - pci_free_consistent(dev->pci_dev, 4 * DESC_SIZE * NR_TX_DESC, - dev->tx_descs, dev->tx_phy_descs); - pci_free_consistent(dev->pci_dev, 4 * DESC_SIZE * NR_RX_DESC, - dev->rx_info.descs, dev->rx_info.phy_descs); - pci_disable_device(dev->pci_dev); - free_netdev(ndev); - pci_set_drvdata(pci_dev, NULL); -} - -static DEFINE_PCI_DEVICE_TABLE(ns83820_pci_tbl) = { - { 0x100b, 0x0022, PCI_ANY_ID, PCI_ANY_ID, 0, .driver_data = 0, }, - { 0, }, -}; - -static struct pci_driver driver = { - .name = "ns83820", - .id_table = ns83820_pci_tbl, - .probe = ns83820_init_one, - .remove = __devexit_p(ns83820_remove_one), -#if 0 /* FIXME: implement */ - .suspend = , - .resume = , -#endif -}; - - -static int __init ns83820_init(void) -{ - printk(KERN_INFO "ns83820.c: National Semiconductor DP83820 10/100/1000 driver.\n"); - return pci_register_driver(&driver); -} - -static void __exit ns83820_exit(void) -{ - pci_unregister_driver(&driver); -} - -MODULE_AUTHOR("Benjamin LaHaise "); -MODULE_DESCRIPTION("National Semiconductor DP83820 10/100/1000 driver"); -MODULE_LICENSE("GPL"); - -MODULE_DEVICE_TABLE(pci, ns83820_pci_tbl); - -module_param(lnksts, int, 0); -MODULE_PARM_DESC(lnksts, "Polarity of LNKSTS bit"); - -module_param(ihr, int, 0); -MODULE_PARM_DESC(ihr, "Time in 100 us increments to delay interrupts (range 0-127)"); - -module_param(reset_phy, int, 0); -MODULE_PARM_DESC(reset_phy, "Set to 1 to reset the PHY on startup"); - -module_init(ns83820_init); -module_exit(ns83820_exit); diff --git a/drivers/net/sonic.c b/drivers/net/sonic.c deleted file mode 100644 index 26e25d7f5829..000000000000 --- a/drivers/net/sonic.c +++ /dev/null @@ -1,742 +0,0 @@ -/* - * sonic.c - * - * (C) 2005 Finn Thain - * - * Converted to DMA API, added zero-copy buffer handling, and - * (from the mac68k project) introduced dhd's support for 16-bit cards. - * - * (C) 1996,1998 by Thomas Bogendoerfer (tsbogend@alpha.franken.de) - * - * This driver is based on work from Andreas Busse, but most of - * the code is rewritten. - * - * (C) 1995 by Andreas Busse (andy@waldorf-gmbh.de) - * - * Core code included by system sonic drivers - * - * And... partially rewritten again by David Huggins-Daines in order - * to cope with screwed up Macintosh NICs that may or may not use - * 16-bit DMA. - * - * (C) 1999 David Huggins-Daines - * - */ - -/* - * Sources: Olivetti M700-10 Risc Personal Computer hardware handbook, - * National Semiconductors data sheet for the DP83932B Sonic Ethernet - * controller, and the files "8390.c" and "skeleton.c" in this directory. - * - * Additional sources: Nat Semi data sheet for the DP83932C and Nat Semi - * Application Note AN-746, the files "lance.c" and "ibmlana.c". See also - * the NetBSD file "sys/arch/mac68k/dev/if_sn.c". - */ - - - -/* - * Open/initialize the SONIC controller. - * - * This routine should set everything up anew at each open, even - * registers that "should" only need to be set once at boot, so that - * there is non-reboot way to recover if something goes wrong. - */ -static int sonic_open(struct net_device *dev) -{ - struct sonic_local *lp = netdev_priv(dev); - int i; - - if (sonic_debug > 2) - printk("sonic_open: initializing sonic driver.\n"); - - for (i = 0; i < SONIC_NUM_RRS; i++) { - struct sk_buff *skb = dev_alloc_skb(SONIC_RBSIZE + 2); - if (skb == NULL) { - while(i > 0) { /* free any that were allocated successfully */ - i--; - dev_kfree_skb(lp->rx_skb[i]); - lp->rx_skb[i] = NULL; - } - printk(KERN_ERR "%s: couldn't allocate receive buffers\n", - dev->name); - return -ENOMEM; - } - /* align IP header unless DMA requires otherwise */ - if (SONIC_BUS_SCALE(lp->dma_bitmode) == 2) - skb_reserve(skb, 2); - lp->rx_skb[i] = skb; - } - - for (i = 0; i < SONIC_NUM_RRS; i++) { - dma_addr_t laddr = dma_map_single(lp->device, skb_put(lp->rx_skb[i], SONIC_RBSIZE), - SONIC_RBSIZE, DMA_FROM_DEVICE); - if (!laddr) { - while(i > 0) { /* free any that were mapped successfully */ - i--; - dma_unmap_single(lp->device, lp->rx_laddr[i], SONIC_RBSIZE, DMA_FROM_DEVICE); - lp->rx_laddr[i] = (dma_addr_t)0; - } - for (i = 0; i < SONIC_NUM_RRS; i++) { - dev_kfree_skb(lp->rx_skb[i]); - lp->rx_skb[i] = NULL; - } - printk(KERN_ERR "%s: couldn't map rx DMA buffers\n", - dev->name); - return -ENOMEM; - } - lp->rx_laddr[i] = laddr; - } - - /* - * Initialize the SONIC - */ - sonic_init(dev); - - netif_start_queue(dev); - - if (sonic_debug > 2) - printk("sonic_open: Initialization done.\n"); - - return 0; -} - - -/* - * Close the SONIC device - */ -static int sonic_close(struct net_device *dev) -{ - struct sonic_local *lp = netdev_priv(dev); - int i; - - if (sonic_debug > 2) - printk("sonic_close\n"); - - netif_stop_queue(dev); - - /* - * stop the SONIC, disable interrupts - */ - SONIC_WRITE(SONIC_IMR, 0); - SONIC_WRITE(SONIC_ISR, 0x7fff); - SONIC_WRITE(SONIC_CMD, SONIC_CR_RST); - - /* unmap and free skbs that haven't been transmitted */ - for (i = 0; i < SONIC_NUM_TDS; i++) { - if(lp->tx_laddr[i]) { - dma_unmap_single(lp->device, lp->tx_laddr[i], lp->tx_len[i], DMA_TO_DEVICE); - lp->tx_laddr[i] = (dma_addr_t)0; - } - if(lp->tx_skb[i]) { - dev_kfree_skb(lp->tx_skb[i]); - lp->tx_skb[i] = NULL; - } - } - - /* unmap and free the receive buffers */ - for (i = 0; i < SONIC_NUM_RRS; i++) { - if(lp->rx_laddr[i]) { - dma_unmap_single(lp->device, lp->rx_laddr[i], SONIC_RBSIZE, DMA_FROM_DEVICE); - lp->rx_laddr[i] = (dma_addr_t)0; - } - if(lp->rx_skb[i]) { - dev_kfree_skb(lp->rx_skb[i]); - lp->rx_skb[i] = NULL; - } - } - - return 0; -} - -static void sonic_tx_timeout(struct net_device *dev) -{ - struct sonic_local *lp = netdev_priv(dev); - int i; - /* - * put the Sonic into software-reset mode and - * disable all interrupts before releasing DMA buffers - */ - SONIC_WRITE(SONIC_IMR, 0); - SONIC_WRITE(SONIC_ISR, 0x7fff); - SONIC_WRITE(SONIC_CMD, SONIC_CR_RST); - /* We could resend the original skbs. Easier to re-initialise. */ - for (i = 0; i < SONIC_NUM_TDS; i++) { - if(lp->tx_laddr[i]) { - dma_unmap_single(lp->device, lp->tx_laddr[i], lp->tx_len[i], DMA_TO_DEVICE); - lp->tx_laddr[i] = (dma_addr_t)0; - } - if(lp->tx_skb[i]) { - dev_kfree_skb(lp->tx_skb[i]); - lp->tx_skb[i] = NULL; - } - } - /* Try to restart the adaptor. */ - sonic_init(dev); - lp->stats.tx_errors++; - dev->trans_start = jiffies; /* prevent tx timeout */ - netif_wake_queue(dev); -} - -/* - * transmit packet - * - * Appends new TD during transmission thus avoiding any TX interrupts - * until we run out of TDs. - * This routine interacts closely with the ISR in that it may, - * set tx_skb[i] - * reset the status flags of the new TD - * set and reset EOL flags - * stop the tx queue - * The ISR interacts with this routine in various ways. It may, - * reset tx_skb[i] - * test the EOL and status flags of the TDs - * wake the tx queue - * Concurrently with all of this, the SONIC is potentially writing to - * the status flags of the TDs. - * Until some mutual exclusion is added, this code will not work with SMP. However, - * MIPS Jazz machines and m68k Macs were all uni-processor machines. - */ - -static int sonic_send_packet(struct sk_buff *skb, struct net_device *dev) -{ - struct sonic_local *lp = netdev_priv(dev); - dma_addr_t laddr; - int length; - int entry = lp->next_tx; - - if (sonic_debug > 2) - printk("sonic_send_packet: skb=%p, dev=%p\n", skb, dev); - - length = skb->len; - if (length < ETH_ZLEN) { - if (skb_padto(skb, ETH_ZLEN)) - return NETDEV_TX_OK; - length = ETH_ZLEN; - } - - /* - * Map the packet data into the logical DMA address space - */ - - laddr = dma_map_single(lp->device, skb->data, length, DMA_TO_DEVICE); - if (!laddr) { - printk(KERN_ERR "%s: failed to map tx DMA buffer.\n", dev->name); - dev_kfree_skb(skb); - return NETDEV_TX_BUSY; - } - - sonic_tda_put(dev, entry, SONIC_TD_STATUS, 0); /* clear status */ - sonic_tda_put(dev, entry, SONIC_TD_FRAG_COUNT, 1); /* single fragment */ - sonic_tda_put(dev, entry, SONIC_TD_PKTSIZE, length); /* length of packet */ - sonic_tda_put(dev, entry, SONIC_TD_FRAG_PTR_L, laddr & 0xffff); - sonic_tda_put(dev, entry, SONIC_TD_FRAG_PTR_H, laddr >> 16); - sonic_tda_put(dev, entry, SONIC_TD_FRAG_SIZE, length); - sonic_tda_put(dev, entry, SONIC_TD_LINK, - sonic_tda_get(dev, entry, SONIC_TD_LINK) | SONIC_EOL); - - /* - * Must set tx_skb[entry] only after clearing status, and - * before clearing EOL and before stopping queue - */ - wmb(); - lp->tx_len[entry] = length; - lp->tx_laddr[entry] = laddr; - lp->tx_skb[entry] = skb; - - wmb(); - sonic_tda_put(dev, lp->eol_tx, SONIC_TD_LINK, - sonic_tda_get(dev, lp->eol_tx, SONIC_TD_LINK) & ~SONIC_EOL); - lp->eol_tx = entry; - - lp->next_tx = (entry + 1) & SONIC_TDS_MASK; - if (lp->tx_skb[lp->next_tx] != NULL) { - /* The ring is full, the ISR has yet to process the next TD. */ - if (sonic_debug > 3) - printk("%s: stopping queue\n", dev->name); - netif_stop_queue(dev); - /* after this packet, wait for ISR to free up some TDAs */ - } else netif_start_queue(dev); - - if (sonic_debug > 2) - printk("sonic_send_packet: issuing Tx command\n"); - - SONIC_WRITE(SONIC_CMD, SONIC_CR_TXP); - - return NETDEV_TX_OK; -} - -/* - * The typical workload of the driver: - * Handle the network interface interrupts. - */ -static irqreturn_t sonic_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - struct sonic_local *lp = netdev_priv(dev); - int status; - - if (!(status = SONIC_READ(SONIC_ISR) & SONIC_IMR_DEFAULT)) - return IRQ_NONE; - - do { - if (status & SONIC_INT_PKTRX) { - if (sonic_debug > 2) - printk("%s: packet rx\n", dev->name); - sonic_rx(dev); /* got packet(s) */ - SONIC_WRITE(SONIC_ISR, SONIC_INT_PKTRX); /* clear the interrupt */ - } - - if (status & SONIC_INT_TXDN) { - int entry = lp->cur_tx; - int td_status; - int freed_some = 0; - - /* At this point, cur_tx is the index of a TD that is one of: - * unallocated/freed (status set & tx_skb[entry] clear) - * allocated and sent (status set & tx_skb[entry] set ) - * allocated and not yet sent (status clear & tx_skb[entry] set ) - * still being allocated by sonic_send_packet (status clear & tx_skb[entry] clear) - */ - - if (sonic_debug > 2) - printk("%s: tx done\n", dev->name); - - while (lp->tx_skb[entry] != NULL) { - if ((td_status = sonic_tda_get(dev, entry, SONIC_TD_STATUS)) == 0) - break; - - if (td_status & 0x0001) { - lp->stats.tx_packets++; - lp->stats.tx_bytes += sonic_tda_get(dev, entry, SONIC_TD_PKTSIZE); - } else { - lp->stats.tx_errors++; - if (td_status & 0x0642) - lp->stats.tx_aborted_errors++; - if (td_status & 0x0180) - lp->stats.tx_carrier_errors++; - if (td_status & 0x0020) - lp->stats.tx_window_errors++; - if (td_status & 0x0004) - lp->stats.tx_fifo_errors++; - } - - /* We must free the original skb */ - dev_kfree_skb_irq(lp->tx_skb[entry]); - lp->tx_skb[entry] = NULL; - /* and unmap DMA buffer */ - dma_unmap_single(lp->device, lp->tx_laddr[entry], lp->tx_len[entry], DMA_TO_DEVICE); - lp->tx_laddr[entry] = (dma_addr_t)0; - freed_some = 1; - - if (sonic_tda_get(dev, entry, SONIC_TD_LINK) & SONIC_EOL) { - entry = (entry + 1) & SONIC_TDS_MASK; - break; - } - entry = (entry + 1) & SONIC_TDS_MASK; - } - - if (freed_some || lp->tx_skb[entry] == NULL) - netif_wake_queue(dev); /* The ring is no longer full */ - lp->cur_tx = entry; - SONIC_WRITE(SONIC_ISR, SONIC_INT_TXDN); /* clear the interrupt */ - } - - /* - * check error conditions - */ - if (status & SONIC_INT_RFO) { - if (sonic_debug > 1) - printk("%s: rx fifo overrun\n", dev->name); - lp->stats.rx_fifo_errors++; - SONIC_WRITE(SONIC_ISR, SONIC_INT_RFO); /* clear the interrupt */ - } - if (status & SONIC_INT_RDE) { - if (sonic_debug > 1) - printk("%s: rx descriptors exhausted\n", dev->name); - lp->stats.rx_dropped++; - SONIC_WRITE(SONIC_ISR, SONIC_INT_RDE); /* clear the interrupt */ - } - if (status & SONIC_INT_RBAE) { - if (sonic_debug > 1) - printk("%s: rx buffer area exceeded\n", dev->name); - lp->stats.rx_dropped++; - SONIC_WRITE(SONIC_ISR, SONIC_INT_RBAE); /* clear the interrupt */ - } - - /* counter overruns; all counters are 16bit wide */ - if (status & SONIC_INT_FAE) { - lp->stats.rx_frame_errors += 65536; - SONIC_WRITE(SONIC_ISR, SONIC_INT_FAE); /* clear the interrupt */ - } - if (status & SONIC_INT_CRC) { - lp->stats.rx_crc_errors += 65536; - SONIC_WRITE(SONIC_ISR, SONIC_INT_CRC); /* clear the interrupt */ - } - if (status & SONIC_INT_MP) { - lp->stats.rx_missed_errors += 65536; - SONIC_WRITE(SONIC_ISR, SONIC_INT_MP); /* clear the interrupt */ - } - - /* transmit error */ - if (status & SONIC_INT_TXER) { - if ((SONIC_READ(SONIC_TCR) & SONIC_TCR_FU) && (sonic_debug > 2)) - printk(KERN_ERR "%s: tx fifo underrun\n", dev->name); - SONIC_WRITE(SONIC_ISR, SONIC_INT_TXER); /* clear the interrupt */ - } - - /* bus retry */ - if (status & SONIC_INT_BR) { - printk(KERN_ERR "%s: Bus retry occurred! Device interrupt disabled.\n", - dev->name); - /* ... to help debug DMA problems causing endless interrupts. */ - /* Bounce the eth interface to turn on the interrupt again. */ - SONIC_WRITE(SONIC_IMR, 0); - SONIC_WRITE(SONIC_ISR, SONIC_INT_BR); /* clear the interrupt */ - } - - /* load CAM done */ - if (status & SONIC_INT_LCD) - SONIC_WRITE(SONIC_ISR, SONIC_INT_LCD); /* clear the interrupt */ - } while((status = SONIC_READ(SONIC_ISR) & SONIC_IMR_DEFAULT)); - return IRQ_HANDLED; -} - -/* - * We have a good packet(s), pass it/them up the network stack. - */ -static void sonic_rx(struct net_device *dev) -{ - struct sonic_local *lp = netdev_priv(dev); - int status; - int entry = lp->cur_rx; - - while (sonic_rda_get(dev, entry, SONIC_RD_IN_USE) == 0) { - struct sk_buff *used_skb; - struct sk_buff *new_skb; - dma_addr_t new_laddr; - u16 bufadr_l; - u16 bufadr_h; - int pkt_len; - - status = sonic_rda_get(dev, entry, SONIC_RD_STATUS); - if (status & SONIC_RCR_PRX) { - /* Malloc up new buffer. */ - new_skb = dev_alloc_skb(SONIC_RBSIZE + 2); - if (new_skb == NULL) { - printk(KERN_ERR "%s: Memory squeeze, dropping packet.\n", dev->name); - lp->stats.rx_dropped++; - break; - } - /* provide 16 byte IP header alignment unless DMA requires otherwise */ - if(SONIC_BUS_SCALE(lp->dma_bitmode) == 2) - skb_reserve(new_skb, 2); - - new_laddr = dma_map_single(lp->device, skb_put(new_skb, SONIC_RBSIZE), - SONIC_RBSIZE, DMA_FROM_DEVICE); - if (!new_laddr) { - dev_kfree_skb(new_skb); - printk(KERN_ERR "%s: Failed to map rx buffer, dropping packet.\n", dev->name); - lp->stats.rx_dropped++; - break; - } - - /* now we have a new skb to replace it, pass the used one up the stack */ - dma_unmap_single(lp->device, lp->rx_laddr[entry], SONIC_RBSIZE, DMA_FROM_DEVICE); - used_skb = lp->rx_skb[entry]; - pkt_len = sonic_rda_get(dev, entry, SONIC_RD_PKTLEN); - skb_trim(used_skb, pkt_len); - used_skb->protocol = eth_type_trans(used_skb, dev); - netif_rx(used_skb); - lp->stats.rx_packets++; - lp->stats.rx_bytes += pkt_len; - - /* and insert the new skb */ - lp->rx_laddr[entry] = new_laddr; - lp->rx_skb[entry] = new_skb; - - bufadr_l = (unsigned long)new_laddr & 0xffff; - bufadr_h = (unsigned long)new_laddr >> 16; - sonic_rra_put(dev, entry, SONIC_RR_BUFADR_L, bufadr_l); - sonic_rra_put(dev, entry, SONIC_RR_BUFADR_H, bufadr_h); - } else { - /* This should only happen, if we enable accepting broken packets. */ - lp->stats.rx_errors++; - if (status & SONIC_RCR_FAER) - lp->stats.rx_frame_errors++; - if (status & SONIC_RCR_CRCR) - lp->stats.rx_crc_errors++; - } - if (status & SONIC_RCR_LPKT) { - /* - * this was the last packet out of the current receive buffer - * give the buffer back to the SONIC - */ - lp->cur_rwp += SIZEOF_SONIC_RR * SONIC_BUS_SCALE(lp->dma_bitmode); - if (lp->cur_rwp >= lp->rra_end) lp->cur_rwp = lp->rra_laddr & 0xffff; - SONIC_WRITE(SONIC_RWP, lp->cur_rwp); - if (SONIC_READ(SONIC_ISR) & SONIC_INT_RBE) { - if (sonic_debug > 2) - printk("%s: rx buffer exhausted\n", dev->name); - SONIC_WRITE(SONIC_ISR, SONIC_INT_RBE); /* clear the flag */ - } - } else - printk(KERN_ERR "%s: rx desc without RCR_LPKT. Shouldn't happen !?\n", - dev->name); - /* - * give back the descriptor - */ - sonic_rda_put(dev, entry, SONIC_RD_LINK, - sonic_rda_get(dev, entry, SONIC_RD_LINK) | SONIC_EOL); - sonic_rda_put(dev, entry, SONIC_RD_IN_USE, 1); - sonic_rda_put(dev, lp->eol_rx, SONIC_RD_LINK, - sonic_rda_get(dev, lp->eol_rx, SONIC_RD_LINK) & ~SONIC_EOL); - lp->eol_rx = entry; - lp->cur_rx = entry = (entry + 1) & SONIC_RDS_MASK; - } - /* - * If any worth-while packets have been received, netif_rx() - * has done a mark_bh(NET_BH) for us and will work on them - * when we get to the bottom-half routine. - */ -} - - -/* - * Get the current statistics. - * This may be called with the device open or closed. - */ -static struct net_device_stats *sonic_get_stats(struct net_device *dev) -{ - struct sonic_local *lp = netdev_priv(dev); - - /* read the tally counter from the SONIC and reset them */ - lp->stats.rx_crc_errors += SONIC_READ(SONIC_CRCT); - SONIC_WRITE(SONIC_CRCT, 0xffff); - lp->stats.rx_frame_errors += SONIC_READ(SONIC_FAET); - SONIC_WRITE(SONIC_FAET, 0xffff); - lp->stats.rx_missed_errors += SONIC_READ(SONIC_MPT); - SONIC_WRITE(SONIC_MPT, 0xffff); - - return &lp->stats; -} - - -/* - * Set or clear the multicast filter for this adaptor. - */ -static void sonic_multicast_list(struct net_device *dev) -{ - struct sonic_local *lp = netdev_priv(dev); - unsigned int rcr; - struct netdev_hw_addr *ha; - unsigned char *addr; - int i; - - rcr = SONIC_READ(SONIC_RCR) & ~(SONIC_RCR_PRO | SONIC_RCR_AMC); - rcr |= SONIC_RCR_BRD; /* accept broadcast packets */ - - if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */ - rcr |= SONIC_RCR_PRO; - } else { - if ((dev->flags & IFF_ALLMULTI) || - (netdev_mc_count(dev) > 15)) { - rcr |= SONIC_RCR_AMC; - } else { - if (sonic_debug > 2) - printk("sonic_multicast_list: mc_count %d\n", - netdev_mc_count(dev)); - sonic_set_cam_enable(dev, 1); /* always enable our own address */ - i = 1; - netdev_for_each_mc_addr(ha, dev) { - addr = ha->addr; - sonic_cda_put(dev, i, SONIC_CD_CAP0, addr[1] << 8 | addr[0]); - sonic_cda_put(dev, i, SONIC_CD_CAP1, addr[3] << 8 | addr[2]); - sonic_cda_put(dev, i, SONIC_CD_CAP2, addr[5] << 8 | addr[4]); - sonic_set_cam_enable(dev, sonic_get_cam_enable(dev) | (1 << i)); - i++; - } - SONIC_WRITE(SONIC_CDC, 16); - /* issue Load CAM command */ - SONIC_WRITE(SONIC_CDP, lp->cda_laddr & 0xffff); - SONIC_WRITE(SONIC_CMD, SONIC_CR_LCAM); - } - } - - if (sonic_debug > 2) - printk("sonic_multicast_list: setting RCR=%x\n", rcr); - - SONIC_WRITE(SONIC_RCR, rcr); -} - - -/* - * Initialize the SONIC ethernet controller. - */ -static int sonic_init(struct net_device *dev) -{ - unsigned int cmd; - struct sonic_local *lp = netdev_priv(dev); - int i; - - /* - * put the Sonic into software-reset mode and - * disable all interrupts - */ - SONIC_WRITE(SONIC_IMR, 0); - SONIC_WRITE(SONIC_ISR, 0x7fff); - SONIC_WRITE(SONIC_CMD, SONIC_CR_RST); - - /* - * clear software reset flag, disable receiver, clear and - * enable interrupts, then completely initialize the SONIC - */ - SONIC_WRITE(SONIC_CMD, 0); - SONIC_WRITE(SONIC_CMD, SONIC_CR_RXDIS); - - /* - * initialize the receive resource area - */ - if (sonic_debug > 2) - printk("sonic_init: initialize receive resource area\n"); - - for (i = 0; i < SONIC_NUM_RRS; i++) { - u16 bufadr_l = (unsigned long)lp->rx_laddr[i] & 0xffff; - u16 bufadr_h = (unsigned long)lp->rx_laddr[i] >> 16; - sonic_rra_put(dev, i, SONIC_RR_BUFADR_L, bufadr_l); - sonic_rra_put(dev, i, SONIC_RR_BUFADR_H, bufadr_h); - sonic_rra_put(dev, i, SONIC_RR_BUFSIZE_L, SONIC_RBSIZE >> 1); - sonic_rra_put(dev, i, SONIC_RR_BUFSIZE_H, 0); - } - - /* initialize all RRA registers */ - lp->rra_end = (lp->rra_laddr + SONIC_NUM_RRS * SIZEOF_SONIC_RR * - SONIC_BUS_SCALE(lp->dma_bitmode)) & 0xffff; - lp->cur_rwp = (lp->rra_laddr + (SONIC_NUM_RRS - 1) * SIZEOF_SONIC_RR * - SONIC_BUS_SCALE(lp->dma_bitmode)) & 0xffff; - - SONIC_WRITE(SONIC_RSA, lp->rra_laddr & 0xffff); - SONIC_WRITE(SONIC_REA, lp->rra_end); - SONIC_WRITE(SONIC_RRP, lp->rra_laddr & 0xffff); - SONIC_WRITE(SONIC_RWP, lp->cur_rwp); - SONIC_WRITE(SONIC_URRA, lp->rra_laddr >> 16); - SONIC_WRITE(SONIC_EOBC, (SONIC_RBSIZE >> 1) - (lp->dma_bitmode ? 2 : 1)); - - /* load the resource pointers */ - if (sonic_debug > 3) - printk("sonic_init: issuing RRRA command\n"); - - SONIC_WRITE(SONIC_CMD, SONIC_CR_RRRA); - i = 0; - while (i++ < 100) { - if (SONIC_READ(SONIC_CMD) & SONIC_CR_RRRA) - break; - } - - if (sonic_debug > 2) - printk("sonic_init: status=%x i=%d\n", SONIC_READ(SONIC_CMD), i); - - /* - * Initialize the receive descriptors so that they - * become a circular linked list, ie. let the last - * descriptor point to the first again. - */ - if (sonic_debug > 2) - printk("sonic_init: initialize receive descriptors\n"); - for (i=0; irda_laddr + - ((i+1) * SIZEOF_SONIC_RD * SONIC_BUS_SCALE(lp->dma_bitmode))); - } - /* fix last descriptor */ - sonic_rda_put(dev, SONIC_NUM_RDS - 1, SONIC_RD_LINK, - (lp->rda_laddr & 0xffff) | SONIC_EOL); - lp->eol_rx = SONIC_NUM_RDS - 1; - lp->cur_rx = 0; - SONIC_WRITE(SONIC_URDA, lp->rda_laddr >> 16); - SONIC_WRITE(SONIC_CRDA, lp->rda_laddr & 0xffff); - - /* - * initialize transmit descriptors - */ - if (sonic_debug > 2) - printk("sonic_init: initialize transmit descriptors\n"); - for (i = 0; i < SONIC_NUM_TDS; i++) { - sonic_tda_put(dev, i, SONIC_TD_STATUS, 0); - sonic_tda_put(dev, i, SONIC_TD_CONFIG, 0); - sonic_tda_put(dev, i, SONIC_TD_PKTSIZE, 0); - sonic_tda_put(dev, i, SONIC_TD_FRAG_COUNT, 0); - sonic_tda_put(dev, i, SONIC_TD_LINK, - (lp->tda_laddr & 0xffff) + - (i + 1) * SIZEOF_SONIC_TD * SONIC_BUS_SCALE(lp->dma_bitmode)); - lp->tx_skb[i] = NULL; - } - /* fix last descriptor */ - sonic_tda_put(dev, SONIC_NUM_TDS - 1, SONIC_TD_LINK, - (lp->tda_laddr & 0xffff)); - - SONIC_WRITE(SONIC_UTDA, lp->tda_laddr >> 16); - SONIC_WRITE(SONIC_CTDA, lp->tda_laddr & 0xffff); - lp->cur_tx = lp->next_tx = 0; - lp->eol_tx = SONIC_NUM_TDS - 1; - - /* - * put our own address to CAM desc[0] - */ - sonic_cda_put(dev, 0, SONIC_CD_CAP0, dev->dev_addr[1] << 8 | dev->dev_addr[0]); - sonic_cda_put(dev, 0, SONIC_CD_CAP1, dev->dev_addr[3] << 8 | dev->dev_addr[2]); - sonic_cda_put(dev, 0, SONIC_CD_CAP2, dev->dev_addr[5] << 8 | dev->dev_addr[4]); - sonic_set_cam_enable(dev, 1); - - for (i = 0; i < 16; i++) - sonic_cda_put(dev, i, SONIC_CD_ENTRY_POINTER, i); - - /* - * initialize CAM registers - */ - SONIC_WRITE(SONIC_CDP, lp->cda_laddr & 0xffff); - SONIC_WRITE(SONIC_CDC, 16); - - /* - * load the CAM - */ - SONIC_WRITE(SONIC_CMD, SONIC_CR_LCAM); - - i = 0; - while (i++ < 100) { - if (SONIC_READ(SONIC_ISR) & SONIC_INT_LCD) - break; - } - if (sonic_debug > 2) { - printk("sonic_init: CMD=%x, ISR=%x\n, i=%d", - SONIC_READ(SONIC_CMD), SONIC_READ(SONIC_ISR), i); - } - - /* - * enable receiver, disable loopback - * and enable all interrupts - */ - SONIC_WRITE(SONIC_CMD, SONIC_CR_RXEN | SONIC_CR_STP); - SONIC_WRITE(SONIC_RCR, SONIC_RCR_DEFAULT); - SONIC_WRITE(SONIC_TCR, SONIC_TCR_DEFAULT); - SONIC_WRITE(SONIC_ISR, 0x7fff); - SONIC_WRITE(SONIC_IMR, SONIC_IMR_DEFAULT); - - cmd = SONIC_READ(SONIC_CMD); - if ((cmd & SONIC_CR_RXEN) == 0 || (cmd & SONIC_CR_STP) == 0) - printk(KERN_ERR "sonic_init: failed, status=%x\n", cmd); - - if (sonic_debug > 2) - printk("sonic_init: new status=%x\n", - SONIC_READ(SONIC_CMD)); - - return 0; -} - -MODULE_LICENSE("GPL"); diff --git a/drivers/net/sonic.h b/drivers/net/sonic.h deleted file mode 100644 index 07091dd27e5d..000000000000 --- a/drivers/net/sonic.h +++ /dev/null @@ -1,450 +0,0 @@ -/* - * Header file for sonic.c - * - * (C) Waldorf Electronics, Germany - * Written by Andreas Busse - * - * NOTE: most of the structure definitions here are endian dependent. - * If you want to use this driver on big endian machines, the data - * and pad structure members must be exchanged. Also, the structures - * need to be changed accordingly to the bus size. - * - * 981229 MSch: did just that for the 68k Mac port (32 bit, big endian) - * - * 990611 David Huggins-Daines : This machine abstraction - * does not cope with 16-bit bus sizes very well. Therefore I have - * rewritten it with ugly macros and evil inlines. - * - * 050625 Finn Thain: introduced more 32-bit cards and dhd's support - * for 16-bit cards (from the mac68k project). - */ - -#ifndef SONIC_H -#define SONIC_H - - -/* - * SONIC register offsets - */ - -#define SONIC_CMD 0x00 -#define SONIC_DCR 0x01 -#define SONIC_RCR 0x02 -#define SONIC_TCR 0x03 -#define SONIC_IMR 0x04 -#define SONIC_ISR 0x05 - -#define SONIC_UTDA 0x06 -#define SONIC_CTDA 0x07 - -#define SONIC_URDA 0x0d -#define SONIC_CRDA 0x0e -#define SONIC_EOBC 0x13 -#define SONIC_URRA 0x14 -#define SONIC_RSA 0x15 -#define SONIC_REA 0x16 -#define SONIC_RRP 0x17 -#define SONIC_RWP 0x18 -#define SONIC_RSC 0x2b - -#define SONIC_CEP 0x21 -#define SONIC_CAP2 0x22 -#define SONIC_CAP1 0x23 -#define SONIC_CAP0 0x24 -#define SONIC_CE 0x25 -#define SONIC_CDP 0x26 -#define SONIC_CDC 0x27 - -#define SONIC_WT0 0x29 -#define SONIC_WT1 0x2a - -#define SONIC_SR 0x28 - - -/* test-only registers */ - -#define SONIC_TPS 0x08 -#define SONIC_TFC 0x09 -#define SONIC_TSA0 0x0a -#define SONIC_TSA1 0x0b -#define SONIC_TFS 0x0c - -#define SONIC_CRBA0 0x0f -#define SONIC_CRBA1 0x10 -#define SONIC_RBWC0 0x11 -#define SONIC_RBWC1 0x12 -#define SONIC_TTDA 0x20 -#define SONIC_MDT 0x2f - -#define SONIC_TRBA0 0x19 -#define SONIC_TRBA1 0x1a -#define SONIC_TBWC0 0x1b -#define SONIC_TBWC1 0x1c -#define SONIC_LLFA 0x1f - -#define SONIC_ADDR0 0x1d -#define SONIC_ADDR1 0x1e - -/* - * Error counters - */ - -#define SONIC_CRCT 0x2c -#define SONIC_FAET 0x2d -#define SONIC_MPT 0x2e - -#define SONIC_DCR2 0x3f - -/* - * SONIC command bits - */ - -#define SONIC_CR_LCAM 0x0200 -#define SONIC_CR_RRRA 0x0100 -#define SONIC_CR_RST 0x0080 -#define SONIC_CR_ST 0x0020 -#define SONIC_CR_STP 0x0010 -#define SONIC_CR_RXEN 0x0008 -#define SONIC_CR_RXDIS 0x0004 -#define SONIC_CR_TXP 0x0002 -#define SONIC_CR_HTX 0x0001 - -/* - * SONIC data configuration bits - */ - -#define SONIC_DCR_EXBUS 0x8000 -#define SONIC_DCR_LBR 0x2000 -#define SONIC_DCR_PO1 0x1000 -#define SONIC_DCR_PO0 0x0800 -#define SONIC_DCR_SBUS 0x0400 -#define SONIC_DCR_USR1 0x0200 -#define SONIC_DCR_USR0 0x0100 -#define SONIC_DCR_WC1 0x0080 -#define SONIC_DCR_WC0 0x0040 -#define SONIC_DCR_DW 0x0020 -#define SONIC_DCR_BMS 0x0010 -#define SONIC_DCR_RFT1 0x0008 -#define SONIC_DCR_RFT0 0x0004 -#define SONIC_DCR_TFT1 0x0002 -#define SONIC_DCR_TFT0 0x0001 - -/* - * Constants for the SONIC receive control register. - */ - -#define SONIC_RCR_ERR 0x8000 -#define SONIC_RCR_RNT 0x4000 -#define SONIC_RCR_BRD 0x2000 -#define SONIC_RCR_PRO 0x1000 -#define SONIC_RCR_AMC 0x0800 -#define SONIC_RCR_LB1 0x0400 -#define SONIC_RCR_LB0 0x0200 - -#define SONIC_RCR_MC 0x0100 -#define SONIC_RCR_BC 0x0080 -#define SONIC_RCR_LPKT 0x0040 -#define SONIC_RCR_CRS 0x0020 -#define SONIC_RCR_COL 0x0010 -#define SONIC_RCR_CRCR 0x0008 -#define SONIC_RCR_FAER 0x0004 -#define SONIC_RCR_LBK 0x0002 -#define SONIC_RCR_PRX 0x0001 - -#define SONIC_RCR_LB_OFF 0 -#define SONIC_RCR_LB_MAC SONIC_RCR_LB0 -#define SONIC_RCR_LB_ENDEC SONIC_RCR_LB1 -#define SONIC_RCR_LB_TRANS (SONIC_RCR_LB0 | SONIC_RCR_LB1) - -/* default RCR setup */ - -#define SONIC_RCR_DEFAULT (SONIC_RCR_BRD) - - -/* - * SONIC Transmit Control register bits - */ - -#define SONIC_TCR_PINTR 0x8000 -#define SONIC_TCR_POWC 0x4000 -#define SONIC_TCR_CRCI 0x2000 -#define SONIC_TCR_EXDIS 0x1000 -#define SONIC_TCR_EXD 0x0400 -#define SONIC_TCR_DEF 0x0200 -#define SONIC_TCR_NCRS 0x0100 -#define SONIC_TCR_CRLS 0x0080 -#define SONIC_TCR_EXC 0x0040 -#define SONIC_TCR_PMB 0x0008 -#define SONIC_TCR_FU 0x0004 -#define SONIC_TCR_BCM 0x0002 -#define SONIC_TCR_PTX 0x0001 - -#define SONIC_TCR_DEFAULT 0x0000 - -/* - * Constants for the SONIC_INTERRUPT_MASK and - * SONIC_INTERRUPT_STATUS registers. - */ - -#define SONIC_INT_BR 0x4000 -#define SONIC_INT_HBL 0x2000 -#define SONIC_INT_LCD 0x1000 -#define SONIC_INT_PINT 0x0800 -#define SONIC_INT_PKTRX 0x0400 -#define SONIC_INT_TXDN 0x0200 -#define SONIC_INT_TXER 0x0100 -#define SONIC_INT_TC 0x0080 -#define SONIC_INT_RDE 0x0040 -#define SONIC_INT_RBE 0x0020 -#define SONIC_INT_RBAE 0x0010 -#define SONIC_INT_CRC 0x0008 -#define SONIC_INT_FAE 0x0004 -#define SONIC_INT_MP 0x0002 -#define SONIC_INT_RFO 0x0001 - - -/* - * The interrupts we allow. - */ - -#define SONIC_IMR_DEFAULT ( SONIC_INT_BR | \ - SONIC_INT_LCD | \ - SONIC_INT_RFO | \ - SONIC_INT_PKTRX | \ - SONIC_INT_TXDN | \ - SONIC_INT_TXER | \ - SONIC_INT_RDE | \ - SONIC_INT_RBAE | \ - SONIC_INT_CRC | \ - SONIC_INT_FAE | \ - SONIC_INT_MP) - - -#define SONIC_EOL 0x0001 -#define CAM_DESCRIPTORS 16 - -/* Offsets in the various DMA buffers accessed by the SONIC */ - -#define SONIC_BITMODE16 0 -#define SONIC_BITMODE32 1 -#define SONIC_BUS_SCALE(bitmode) ((bitmode) ? 4 : 2) -/* Note! These are all measured in bus-size units, so use SONIC_BUS_SCALE */ -#define SIZEOF_SONIC_RR 4 -#define SONIC_RR_BUFADR_L 0 -#define SONIC_RR_BUFADR_H 1 -#define SONIC_RR_BUFSIZE_L 2 -#define SONIC_RR_BUFSIZE_H 3 - -#define SIZEOF_SONIC_RD 7 -#define SONIC_RD_STATUS 0 -#define SONIC_RD_PKTLEN 1 -#define SONIC_RD_PKTPTR_L 2 -#define SONIC_RD_PKTPTR_H 3 -#define SONIC_RD_SEQNO 4 -#define SONIC_RD_LINK 5 -#define SONIC_RD_IN_USE 6 - -#define SIZEOF_SONIC_TD 8 -#define SONIC_TD_STATUS 0 -#define SONIC_TD_CONFIG 1 -#define SONIC_TD_PKTSIZE 2 -#define SONIC_TD_FRAG_COUNT 3 -#define SONIC_TD_FRAG_PTR_L 4 -#define SONIC_TD_FRAG_PTR_H 5 -#define SONIC_TD_FRAG_SIZE 6 -#define SONIC_TD_LINK 7 - -#define SIZEOF_SONIC_CD 4 -#define SONIC_CD_ENTRY_POINTER 0 -#define SONIC_CD_CAP0 1 -#define SONIC_CD_CAP1 2 -#define SONIC_CD_CAP2 3 - -#define SIZEOF_SONIC_CDA ((CAM_DESCRIPTORS * SIZEOF_SONIC_CD) + 1) -#define SONIC_CDA_CAM_ENABLE (CAM_DESCRIPTORS * SIZEOF_SONIC_CD) - -/* - * Some tunables for the buffer areas. Power of 2 is required - * the current driver uses one receive buffer for each descriptor. - * - * MSch: use more buffer space for the slow m68k Macs! - */ -#define SONIC_NUM_RRS 16 /* number of receive resources */ -#define SONIC_NUM_RDS SONIC_NUM_RRS /* number of receive descriptors */ -#define SONIC_NUM_TDS 16 /* number of transmit descriptors */ - -#define SONIC_RDS_MASK (SONIC_NUM_RDS-1) -#define SONIC_TDS_MASK (SONIC_NUM_TDS-1) - -#define SONIC_RBSIZE 1520 /* size of one resource buffer */ - -/* Again, measured in bus size units! */ -#define SIZEOF_SONIC_DESC (SIZEOF_SONIC_CDA \ - + (SIZEOF_SONIC_TD * SONIC_NUM_TDS) \ - + (SIZEOF_SONIC_RD * SONIC_NUM_RDS) \ - + (SIZEOF_SONIC_RR * SONIC_NUM_RRS)) - -/* Information that need to be kept for each board. */ -struct sonic_local { - /* Bus size. 0 == 16 bits, 1 == 32 bits. */ - int dma_bitmode; - /* Register offset within the longword (independent of endianness, - and varies from one type of Macintosh SONIC to another - (Aarrgh)) */ - int reg_offset; - void *descriptors; - /* Crud. These areas have to be within the same 64K. Therefore - we allocate a desriptors page, and point these to places within it. */ - void *cda; /* CAM descriptor area */ - void *tda; /* Transmit descriptor area */ - void *rra; /* Receive resource area */ - void *rda; /* Receive descriptor area */ - struct sk_buff* volatile rx_skb[SONIC_NUM_RRS]; /* packets to be received */ - struct sk_buff* volatile tx_skb[SONIC_NUM_TDS]; /* packets to be transmitted */ - unsigned int tx_len[SONIC_NUM_TDS]; /* lengths of tx DMA mappings */ - /* Logical DMA addresses on MIPS, bus addresses on m68k - * (so "laddr" is a bit misleading) */ - dma_addr_t descriptors_laddr; - u32 cda_laddr; /* logical DMA address of CDA */ - u32 tda_laddr; /* logical DMA address of TDA */ - u32 rra_laddr; /* logical DMA address of RRA */ - u32 rda_laddr; /* logical DMA address of RDA */ - dma_addr_t rx_laddr[SONIC_NUM_RRS]; /* logical DMA addresses of rx skbuffs */ - dma_addr_t tx_laddr[SONIC_NUM_TDS]; /* logical DMA addresses of tx skbuffs */ - unsigned int rra_end; - unsigned int cur_rwp; - unsigned int cur_rx; - unsigned int cur_tx; /* first unacked transmit packet */ - unsigned int eol_rx; - unsigned int eol_tx; /* last unacked transmit packet */ - unsigned int next_tx; /* next free TD */ - struct device *device; /* generic device */ - struct net_device_stats stats; -}; - -#define TX_TIMEOUT (3 * HZ) - -/* Index to functions, as function prototypes. */ - -static int sonic_open(struct net_device *dev); -static int sonic_send_packet(struct sk_buff *skb, struct net_device *dev); -static irqreturn_t sonic_interrupt(int irq, void *dev_id); -static void sonic_rx(struct net_device *dev); -static int sonic_close(struct net_device *dev); -static struct net_device_stats *sonic_get_stats(struct net_device *dev); -static void sonic_multicast_list(struct net_device *dev); -static int sonic_init(struct net_device *dev); -static void sonic_tx_timeout(struct net_device *dev); - -/* Internal inlines for reading/writing DMA buffers. Note that bus - size and endianness matter here, whereas they don't for registers, - as far as we can tell. */ -/* OpenBSD calls this "SWO". I'd like to think that sonic_buf_put() - is a much better name. */ -static inline void sonic_buf_put(void* base, int bitmode, - int offset, __u16 val) -{ - if (bitmode) -#ifdef __BIG_ENDIAN - ((__u16 *) base + (offset*2))[1] = val; -#else - ((__u16 *) base + (offset*2))[0] = val; -#endif - else - ((__u16 *) base)[offset] = val; -} - -static inline __u16 sonic_buf_get(void* base, int bitmode, - int offset) -{ - if (bitmode) -#ifdef __BIG_ENDIAN - return ((volatile __u16 *) base + (offset*2))[1]; -#else - return ((volatile __u16 *) base + (offset*2))[0]; -#endif - else - return ((volatile __u16 *) base)[offset]; -} - -/* Inlines that you should actually use for reading/writing DMA buffers */ -static inline void sonic_cda_put(struct net_device* dev, int entry, - int offset, __u16 val) -{ - struct sonic_local *lp = netdev_priv(dev); - sonic_buf_put(lp->cda, lp->dma_bitmode, - (entry * SIZEOF_SONIC_CD) + offset, val); -} - -static inline __u16 sonic_cda_get(struct net_device* dev, int entry, - int offset) -{ - struct sonic_local *lp = netdev_priv(dev); - return sonic_buf_get(lp->cda, lp->dma_bitmode, - (entry * SIZEOF_SONIC_CD) + offset); -} - -static inline void sonic_set_cam_enable(struct net_device* dev, __u16 val) -{ - struct sonic_local *lp = netdev_priv(dev); - sonic_buf_put(lp->cda, lp->dma_bitmode, SONIC_CDA_CAM_ENABLE, val); -} - -static inline __u16 sonic_get_cam_enable(struct net_device* dev) -{ - struct sonic_local *lp = netdev_priv(dev); - return sonic_buf_get(lp->cda, lp->dma_bitmode, SONIC_CDA_CAM_ENABLE); -} - -static inline void sonic_tda_put(struct net_device* dev, int entry, - int offset, __u16 val) -{ - struct sonic_local *lp = netdev_priv(dev); - sonic_buf_put(lp->tda, lp->dma_bitmode, - (entry * SIZEOF_SONIC_TD) + offset, val); -} - -static inline __u16 sonic_tda_get(struct net_device* dev, int entry, - int offset) -{ - struct sonic_local *lp = netdev_priv(dev); - return sonic_buf_get(lp->tda, lp->dma_bitmode, - (entry * SIZEOF_SONIC_TD) + offset); -} - -static inline void sonic_rda_put(struct net_device* dev, int entry, - int offset, __u16 val) -{ - struct sonic_local *lp = netdev_priv(dev); - sonic_buf_put(lp->rda, lp->dma_bitmode, - (entry * SIZEOF_SONIC_RD) + offset, val); -} - -static inline __u16 sonic_rda_get(struct net_device* dev, int entry, - int offset) -{ - struct sonic_local *lp = netdev_priv(dev); - return sonic_buf_get(lp->rda, lp->dma_bitmode, - (entry * SIZEOF_SONIC_RD) + offset); -} - -static inline void sonic_rra_put(struct net_device* dev, int entry, - int offset, __u16 val) -{ - struct sonic_local *lp = netdev_priv(dev); - sonic_buf_put(lp->rra, lp->dma_bitmode, - (entry * SIZEOF_SONIC_RR) + offset, val); -} - -static inline __u16 sonic_rra_get(struct net_device* dev, int entry, - int offset) -{ - struct sonic_local *lp = netdev_priv(dev); - return sonic_buf_get(lp->rra, lp->dma_bitmode, - (entry * SIZEOF_SONIC_RR) + offset); -} - -static const char *version = - "sonic.c:v0.92 20.9.98 tsbogend@alpha.franken.de\n"; - -#endif /* SONIC_H */ diff --git a/drivers/net/xtsonic.c b/drivers/net/xtsonic.c deleted file mode 100644 index 9f12026d98e7..000000000000 --- a/drivers/net/xtsonic.c +++ /dev/null @@ -1,333 +0,0 @@ -/* - * xtsonic.c - * - * (C) 2001 - 2007 Tensilica Inc. - * Kevin Chea - * Marc Gauthier - * Chris Zankel - * - * (C) 1996,1998 by Thomas Bogendoerfer (tsbogend@alpha.franken.de) - * - * This driver is based on work from Andreas Busse, but most of - * the code is rewritten. - * - * (C) 1995 by Andreas Busse (andy@waldorf-gmbh.de) - * - * A driver for the onboard Sonic ethernet controller on the XT2000. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -static char xtsonic_string[] = "xtsonic"; - -extern unsigned xtboard_nvram_valid(void); -extern void xtboard_get_ether_addr(unsigned char *buf); - -#include "sonic.h" - -/* - * According to the documentation for the Sonic ethernet controller, - * EOBC should be 760 words (1520 bytes) for 32-bit applications, and, - * as such, 2 words less than the buffer size. The value for RBSIZE - * defined in sonic.h, however is only 1520. - * - * (Note that in 16-bit configurations, EOBC is 759 words (1518 bytes) and - * RBSIZE 1520 bytes) - */ -#undef SONIC_RBSIZE -#define SONIC_RBSIZE 1524 - -/* - * The chip provides 256 byte register space. - */ -#define SONIC_MEM_SIZE 0x100 - -/* - * Macros to access SONIC registers - */ -#define SONIC_READ(reg) \ - (0xffff & *((volatile unsigned int *)dev->base_addr+reg)) - -#define SONIC_WRITE(reg,val) \ - *((volatile unsigned int *)dev->base_addr+reg) = val - - -/* Use 0 for production, 1 for verification, and >2 for debug */ -#ifdef SONIC_DEBUG -static unsigned int sonic_debug = SONIC_DEBUG; -#else -static unsigned int sonic_debug = 1; -#endif - -/* - * We cannot use station (ethernet) address prefixes to detect the - * sonic controller since these are board manufacturer depended. - * So we check for known Silicon Revision IDs instead. - */ -static unsigned short known_revisions[] = -{ - 0x101, /* SONIC 83934 */ - 0xffff /* end of list */ -}; - -static int xtsonic_open(struct net_device *dev) -{ - int retval; - - retval = request_irq(dev->irq, sonic_interrupt, IRQF_DISABLED, - "sonic", dev); - if (retval) { - printk(KERN_ERR "%s: unable to get IRQ %d.\n", - dev->name, dev->irq); - return -EAGAIN; - } - - retval = sonic_open(dev); - if (retval) - free_irq(dev->irq, dev); - return retval; -} - -static int xtsonic_close(struct net_device *dev) -{ - int err; - err = sonic_close(dev); - free_irq(dev->irq, dev); - return err; -} - -static const struct net_device_ops xtsonic_netdev_ops = { - .ndo_open = xtsonic_open, - .ndo_stop = xtsonic_close, - .ndo_start_xmit = sonic_send_packet, - .ndo_get_stats = sonic_get_stats, - .ndo_set_multicast_list = sonic_multicast_list, - .ndo_tx_timeout = sonic_tx_timeout, - .ndo_validate_addr = eth_validate_addr, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, -}; - -static int __init sonic_probe1(struct net_device *dev) -{ - static unsigned version_printed = 0; - unsigned int silicon_revision; - struct sonic_local *lp = netdev_priv(dev); - unsigned int base_addr = dev->base_addr; - int i; - int err = 0; - - if (!request_mem_region(base_addr, 0x100, xtsonic_string)) - return -EBUSY; - - /* - * get the Silicon Revision ID. If this is one of the known - * one assume that we found a SONIC ethernet controller at - * the expected location. - */ - silicon_revision = SONIC_READ(SONIC_SR); - if (sonic_debug > 1) - printk("SONIC Silicon Revision = 0x%04x\n",silicon_revision); - - i = 0; - while ((known_revisions[i] != 0xffff) && - (known_revisions[i] != silicon_revision)) - i++; - - if (known_revisions[i] == 0xffff) { - printk("SONIC ethernet controller not found (0x%4x)\n", - silicon_revision); - return -ENODEV; - } - - if (sonic_debug && version_printed++ == 0) - printk(version); - - /* - * Put the sonic into software reset, then retrieve ethernet address. - * Note: we are assuming that the boot-loader has initialized the cam. - */ - SONIC_WRITE(SONIC_CMD,SONIC_CR_RST); - SONIC_WRITE(SONIC_DCR, - SONIC_DCR_WC0|SONIC_DCR_DW|SONIC_DCR_LBR|SONIC_DCR_SBUS); - SONIC_WRITE(SONIC_CEP,0); - SONIC_WRITE(SONIC_IMR,0); - - SONIC_WRITE(SONIC_CMD,SONIC_CR_RST); - SONIC_WRITE(SONIC_CEP,0); - - for (i=0; i<3; i++) { - unsigned int val = SONIC_READ(SONIC_CAP0-i); - dev->dev_addr[i*2] = val; - dev->dev_addr[i*2+1] = val >> 8; - } - - /* Initialize the device structure. */ - - lp->dma_bitmode = SONIC_BITMODE32; - - /* - * Allocate local private descriptor areas in uncached space. - * The entire structure must be located within the same 64kb segment. - * A simple way to ensure this is to allocate twice the - * size of the structure -- given that the structure is - * much less than 64 kB, at least one of the halves of - * the allocated area will be contained entirely in 64 kB. - * We also allocate extra space for a pointer to allow freeing - * this structure later on (in xtsonic_cleanup_module()). - */ - lp->descriptors = - dma_alloc_coherent(lp->device, - SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode), - &lp->descriptors_laddr, GFP_KERNEL); - - if (lp->descriptors == NULL) { - printk(KERN_ERR "%s: couldn't alloc DMA memory for " - " descriptors.\n", dev_name(lp->device)); - goto out; - } - - lp->cda = lp->descriptors; - lp->tda = lp->cda + (SIZEOF_SONIC_CDA - * SONIC_BUS_SCALE(lp->dma_bitmode)); - lp->rda = lp->tda + (SIZEOF_SONIC_TD * SONIC_NUM_TDS - * SONIC_BUS_SCALE(lp->dma_bitmode)); - lp->rra = lp->rda + (SIZEOF_SONIC_RD * SONIC_NUM_RDS - * SONIC_BUS_SCALE(lp->dma_bitmode)); - - /* get the virtual dma address */ - - lp->cda_laddr = lp->descriptors_laddr; - lp->tda_laddr = lp->cda_laddr + (SIZEOF_SONIC_CDA - * SONIC_BUS_SCALE(lp->dma_bitmode)); - lp->rda_laddr = lp->tda_laddr + (SIZEOF_SONIC_TD * SONIC_NUM_TDS - * SONIC_BUS_SCALE(lp->dma_bitmode)); - lp->rra_laddr = lp->rda_laddr + (SIZEOF_SONIC_RD * SONIC_NUM_RDS - * SONIC_BUS_SCALE(lp->dma_bitmode)); - - dev->netdev_ops = &xtsonic_netdev_ops; - dev->watchdog_timeo = TX_TIMEOUT; - - /* - * clear tally counter - */ - SONIC_WRITE(SONIC_CRCT,0xffff); - SONIC_WRITE(SONIC_FAET,0xffff); - SONIC_WRITE(SONIC_MPT,0xffff); - - return 0; -out: - release_region(dev->base_addr, SONIC_MEM_SIZE); - return err; -} - - -/* - * Probe for a SONIC ethernet controller on an XT2000 board. - * Actually probing is superfluous but we're paranoid. - */ - -int __devinit xtsonic_probe(struct platform_device *pdev) -{ - struct net_device *dev; - struct sonic_local *lp; - struct resource *resmem, *resirq; - int err = 0; - - if ((resmem = platform_get_resource(pdev, IORESOURCE_MEM, 0)) == NULL) - return -ENODEV; - - if ((resirq = platform_get_resource(pdev, IORESOURCE_IRQ, 0)) == NULL) - return -ENODEV; - - if ((dev = alloc_etherdev(sizeof(struct sonic_local))) == NULL) - return -ENOMEM; - - lp = netdev_priv(dev); - lp->device = &pdev->dev; - SET_NETDEV_DEV(dev, &pdev->dev); - netdev_boot_setup_check(dev); - - dev->base_addr = resmem->start; - dev->irq = resirq->start; - - if ((err = sonic_probe1(dev))) - goto out; - if ((err = register_netdev(dev))) - goto out1; - - printk("%s: SONIC ethernet @%08lx, MAC %pM, IRQ %d\n", dev->name, - dev->base_addr, dev->dev_addr, dev->irq); - - return 0; - -out1: - release_region(dev->base_addr, SONIC_MEM_SIZE); -out: - free_netdev(dev); - - return err; -} - -MODULE_DESCRIPTION("Xtensa XT2000 SONIC ethernet driver"); -module_param(sonic_debug, int, 0); -MODULE_PARM_DESC(sonic_debug, "xtsonic debug level (1-4)"); - -#include "sonic.c" - -static int __devexit xtsonic_device_remove (struct platform_device *pdev) -{ - struct net_device *dev = platform_get_drvdata(pdev); - struct sonic_local *lp = netdev_priv(dev); - - unregister_netdev(dev); - dma_free_coherent(lp->device, - SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode), - lp->descriptors, lp->descriptors_laddr); - release_region (dev->base_addr, SONIC_MEM_SIZE); - free_netdev(dev); - - return 0; -} - -static struct platform_driver xtsonic_driver = { - .probe = xtsonic_probe, - .remove = __devexit_p(xtsonic_device_remove), - .driver = { - .name = xtsonic_string, - }, -}; - -static int __init xtsonic_init(void) -{ - return platform_driver_register(&xtsonic_driver); -} - -static void __exit xtsonic_cleanup(void) -{ - platform_driver_unregister(&xtsonic_driver); -} - -module_init(xtsonic_init); -module_exit(xtsonic_cleanup); -- cgit v1.2.2