From b3781c74373489fa325ce64efdf72f6c8567b783 Mon Sep 17 00:00:00 2001 From: Andrey Yurovsky Date: Fri, 12 Jun 2009 12:45:36 -0700 Subject: libertas: fix IEEE PS mode in GSPI driver The card firmware does not set the Command Download Ready interrupt bit when IEEE PS mode is enabled, preventing the driver from sending commands (such as the command to exit IEEE PS mode) since there is no indication that the card is ready to accept commands. This patch works around the problem by using the the TX Download Ready bit in place of the Command Download Ready Bit while in IEEE PS mode. TX Download Ready is set in IEEE PS mode. Signed-off-by: Andrey Yurovsky Signed-off-by: Javier Cardona Signed-off-by: John W. Linville --- drivers/net/wireless/libertas/if_spi.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/libertas/if_spi.c b/drivers/net/wireless/libertas/if_spi.c index f8c2898d82b0..dc2a1f6ee36c 100644 --- a/drivers/net/wireless/libertas/if_spi.c +++ b/drivers/net/wireless/libertas/if_spi.c @@ -875,7 +875,12 @@ static int lbs_spi_thread(void *data) err = if_spi_c2h_data(card); if (err) goto err; - if (hiStatus & IF_SPI_HIST_CMD_DOWNLOAD_RDY) { + + /* workaround: in PS mode, the card does not set the Command + * Download Ready bit, but it sets TX Download Ready. */ + if (hiStatus & IF_SPI_HIST_CMD_DOWNLOAD_RDY || + (card->priv->psstate != PS_STATE_FULL_POWER && + (hiStatus & IF_SPI_HIST_TX_DOWNLOAD_RDY))) { /* This means two things. First of all, * if there was a previous command sent, the card has * successfully received it. -- cgit v1.2.2 From 87e501b351ed9d837e63f6506b7e66331a69ed58 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Fri, 12 Jun 2009 21:37:31 +0200 Subject: net/libertas: don't recursive spin lock in if_spi_e2h() |BUG: spinlock recursion on CPU#0, lbs_spi_thread/1030 | lock: dee9a1bc, .magic: dead4ead, .owner: lbs_spi_thread/1030, .owner_cpu: 0 |Call Trace: |[deec3eb0] [c0007220] show_stack+0x4c/0x15c (unreliable) |[deec3ef0] [c0187720] spin_bug+0x9c/0xb0 |[deec3f10] [c0187890] _raw_spin_lock+0x54/0x148 |[deec3f40] [c02d260c] _spin_lock_irqsave+0x2c/0x44 |[deec3f60] [e8671800] lbs_queue_event+0x7c/0x130 [libertas] |[deec3f80] [e8725f04] lbs_spi_thread+0x538/0x58c [libertas_spi] |[deec3fe0] [c004f270] kthread+0x4c/0x88 |[deec3ff0] [c000f33c] kernel_thread+0x4c/0x68 if_spi_e2h() is grabbing ->driver_lock just while calling lbs_queue_event() which is grabbing the same lock. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: John W. Linville --- drivers/net/wireless/libertas/if_spi.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/libertas/if_spi.c b/drivers/net/wireless/libertas/if_spi.c index dc2a1f6ee36c..923ed58d58e7 100644 --- a/drivers/net/wireless/libertas/if_spi.c +++ b/drivers/net/wireless/libertas/if_spi.c @@ -812,7 +812,6 @@ out: static void if_spi_e2h(struct if_spi_card *card) { int err = 0; - unsigned long flags; u32 cause; struct lbs_private *priv = card->priv; @@ -827,10 +826,7 @@ static void if_spi_e2h(struct if_spi_card *card) /* generate a card interrupt */ spu_write_u16(card, IF_SPI_CARD_INT_CAUSE_REG, IF_SPI_CIC_HOST_EVENT); - spin_lock_irqsave(&priv->driver_lock, flags); lbs_queue_event(priv, cause & 0xff); - spin_unlock_irqrestore(&priv->driver_lock, flags); - out: if (err) lbs_pr_err("%s: error %d\n", __func__, err); -- cgit v1.2.2 From d7129e190c3107db8ac11a9e51035641b68d2aa7 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 12 Jun 2009 13:22:48 -0700 Subject: iwlwifi: revamp bss_info_changed My earlier patch, "mac80211: unify config_interface and bss_info_changed" introduced a bug in iwlwifi where it will do some things incorrectly now when reassociating. Revamp iwl_bss_info_changed to fix that issue and make it easier to read. Also, while at it, add comments about things that it should do but currently doesn't. Finally, also improve the locking in the function. Signed-off-by: Johannes Berg Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-core.c | 114 ++++++++++++++++++++------------ 1 file changed, 70 insertions(+), 44 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index f9d16ca5b3d9..e05faa004dae 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -2390,39 +2390,46 @@ void iwl_bss_info_changed(struct ieee80211_hw *hw, priv->ibss_beacon = ieee80211_beacon_get(hw, vif); } - if ((changes & BSS_CHANGED_BSSID) && !iwl_is_rfkill(priv)) { - /* If there is currently a HW scan going on in the background - * then we need to cancel it else the RXON below will fail. */ + if (changes & BSS_CHANGED_BEACON_INT) { + priv->beacon_int = bss_conf->beacon_int; + /* TODO: in AP mode, do something to make this take effect */ + } + + if (changes & BSS_CHANGED_BSSID) { + IWL_DEBUG_MAC80211(priv, "BSSID %pM\n", bss_conf->bssid); + + /* + * If there is currently a HW scan going on in the + * background then we need to cancel it else the RXON + * below/in post_associate will fail. + */ if (iwl_scan_cancel_timeout(priv, 100)) { - IWL_WARN(priv, "Aborted scan still in progress " - "after 100ms\n"); + IWL_WARN(priv, "Aborted scan still in progress after 100ms\n"); IWL_DEBUG_MAC80211(priv, "leaving - scan abort failed.\n"); mutex_unlock(&priv->mutex); return; } - memcpy(priv->staging_rxon.bssid_addr, - bss_conf->bssid, ETH_ALEN); - /* TODO: Audit driver for usage of these members and see - * if mac80211 deprecates them (priv->bssid looks like it - * shouldn't be there, but I haven't scanned the IBSS code - * to verify) - jpk */ - memcpy(priv->bssid, bss_conf->bssid, ETH_ALEN); + /* mac80211 only sets assoc when in STATION mode */ + if (priv->iw_mode == NL80211_IFTYPE_ADHOC || + bss_conf->assoc) { + memcpy(priv->staging_rxon.bssid_addr, + bss_conf->bssid, ETH_ALEN); - if (priv->iw_mode == NL80211_IFTYPE_AP) - iwlcore_config_ap(priv); - else { - int rc = iwlcore_commit_rxon(priv); - if ((priv->iw_mode == NL80211_IFTYPE_STATION) && rc) - iwl_rxon_add_station( - priv, priv->active_rxon.bssid_addr, 1); + /* currently needed in a few places */ + memcpy(priv->bssid, bss_conf->bssid, ETH_ALEN); + } else { + priv->staging_rxon.filter_flags &= + ~RXON_FILTER_ASSOC_MSK; } - } else if (!iwl_is_rfkill(priv)) { - iwl_scan_cancel_timeout(priv, 100); - priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK; - iwlcore_commit_rxon(priv); + } + /* + * This needs to be after setting the BSSID in case + * mac80211 decides to do both changes at once because + * it will invoke post_associate. + */ if (priv->iw_mode == NL80211_IFTYPE_ADHOC && changes & BSS_CHANGED_BEACON) { struct sk_buff *beacon = ieee80211_beacon_get(hw, vif); @@ -2431,8 +2438,6 @@ void iwl_bss_info_changed(struct ieee80211_hw *hw, iwl_mac_beacon_update(hw, beacon); } - mutex_unlock(&priv->mutex); - if (changes & BSS_CHANGED_ERP_PREAMBLE) { IWL_DEBUG_MAC80211(priv, "ERP_PREAMBLE %d\n", bss_conf->use_short_preamble); @@ -2450,6 +2455,23 @@ void iwl_bss_info_changed(struct ieee80211_hw *hw, priv->staging_rxon.flags &= ~RXON_FLG_TGG_PROTECT_MSK; } + if (changes & BSS_CHANGED_BASIC_RATES) { + /* XXX use this information + * + * To do that, remove code from iwl_set_rate() and put something + * like this here: + * + if (A-band) + priv->staging_rxon.ofdm_basic_rates = + bss_conf->basic_rates; + else + priv->staging_rxon.ofdm_basic_rates = + bss_conf->basic_rates >> 4; + priv->staging_rxon.cck_basic_rates = + bss_conf->basic_rates & 0xF; + */ + } + if (changes & BSS_CHANGED_HT) { iwl_ht_conf(priv, bss_conf); @@ -2459,10 +2481,6 @@ void iwl_bss_info_changed(struct ieee80211_hw *hw, if (changes & BSS_CHANGED_ASSOC) { IWL_DEBUG_MAC80211(priv, "ASSOC %d\n", bss_conf->assoc); - /* This should never happen as this function should - * never be called from interrupt context. */ - if (WARN_ON_ONCE(in_interrupt())) - return; if (bss_conf->assoc) { priv->assoc_id = bss_conf->aid; priv->beacon_int = bss_conf->beacon_int; @@ -2470,27 +2488,35 @@ void iwl_bss_info_changed(struct ieee80211_hw *hw, priv->timestamp = bss_conf->timestamp; priv->assoc_capability = bss_conf->assoc_capability; - /* we have just associated, don't start scan too early - * leave time for EAPOL exchange to complete + /* + * We have just associated, don't start scan too early + * leave time for EAPOL exchange to complete. + * + * XXX: do this in mac80211 */ priv->next_scan_jiffies = jiffies + IWL_DELAY_NEXT_SCAN_AFTER_ASSOC; - mutex_lock(&priv->mutex); - priv->cfg->ops->lib->post_associate(priv); - mutex_unlock(&priv->mutex); - } else { + if (!iwl_is_rfkill(priv)) + priv->cfg->ops->lib->post_associate(priv); + } else priv->assoc_id = 0; - IWL_DEBUG_MAC80211(priv, "DISASSOC %d\n", bss_conf->assoc); + + } + + if (changes && iwl_is_associated(priv) && priv->assoc_id) { + IWL_DEBUG_MAC80211(priv, "Changes (%#x) while associated\n", + changes); + ret = iwl_send_rxon_assoc(priv); + if (!ret) { + /* Sync active_rxon with latest change. */ + memcpy((void *)&priv->active_rxon, + &priv->staging_rxon, + sizeof(struct iwl_rxon_cmd)); } - } else if (changes && iwl_is_associated(priv) && priv->assoc_id) { - IWL_DEBUG_MAC80211(priv, "Associated Changes %d\n", changes); - ret = iwl_send_rxon_assoc(priv); - if (!ret) - /* Sync active_rxon with latest change. */ - memcpy((void *)&priv->active_rxon, - &priv->staging_rxon, - sizeof(struct iwl_rxon_cmd)); } + + mutex_unlock(&priv->mutex); + IWL_DEBUG_MAC80211(priv, "leave\n"); } EXPORT_SYMBOL(iwl_bss_info_changed); -- cgit v1.2.2 From 8e8df3a08c6f3098b54639ee6892e3753ad5f210 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Fri, 12 Jun 2009 13:22:49 -0700 Subject: iwlwifi: checking for 40MHz mode when checking for 40MHz, compare ht_protection to IEEE80211_HT_OP_MODE_PROTECTION_20MHZ. ht_protection is not a bit-mask field Signed-off-by: Wey-Yi Guy Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index e05faa004dae..b2875fe12561 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -630,7 +630,7 @@ u8 iwl_is_fat_tx_allowed(struct iwl_priv *priv, return 0; } - if (iwl_ht_conf->ht_protection & IEEE80211_HT_OP_MODE_PROTECTION_20MHZ) + if (iwl_ht_conf->ht_protection == IEEE80211_HT_OP_MODE_PROTECTION_20MHZ) return 1; else return iwl_is_channel_extension(priv, priv->band, @@ -826,7 +826,7 @@ void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_info *ht_info) RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK); if (iwl_is_fat_tx_allowed(priv, NULL)) { /* pure 40 fat */ - if (rxon->flags & RXON_FLG_FAT_PROT_MSK) + if (ht_info->ht_protection == IEEE80211_HT_OP_MODE_PROTECTION_20MHZ) rxon->flags |= RXON_FLG_CHANNEL_MODE_PURE_40; else { /* Note: control channel is opposite of extension channel */ -- cgit v1.2.2 From 508b08e7121f2083c9e9cd82f10b9088b6bc13fb Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Fri, 12 Jun 2009 13:22:50 -0700 Subject: iwlwifi: check control channel for pure 40MHz for pure 40MHz mode, set the control channel location if provided, but not like Mixed mode; if information is not provided, still allow 40MHz operation. Signed-off-by: Wey-Yi Guy Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-core.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index b2875fe12561..b122eedef369 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -826,9 +826,18 @@ void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_info *ht_info) RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK); if (iwl_is_fat_tx_allowed(priv, NULL)) { /* pure 40 fat */ - if (ht_info->ht_protection == IEEE80211_HT_OP_MODE_PROTECTION_20MHZ) + if (ht_info->ht_protection == IEEE80211_HT_OP_MODE_PROTECTION_20MHZ) { rxon->flags |= RXON_FLG_CHANNEL_MODE_PURE_40; - else { + /* Note: control channel is opposite of extension channel */ + switch (ht_info->extension_chan_offset) { + case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: + rxon->flags &= ~RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK; + break; + case IEEE80211_HT_PARAM_CHA_SEC_BELOW: + rxon->flags |= RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK; + break; + } + } else { /* Note: control channel is opposite of extension channel */ switch (ht_info->extension_chan_offset) { case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: -- cgit v1.2.2 From 611d3eb72aa7847a1081e6c1ac05fd2012652cde Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Fri, 12 Jun 2009 13:22:51 -0700 Subject: iwlwifi: check for channel location for 40MHz for both mixed and pure 40MHz, need to check for valid channel location. if the specified channel not allow the channel location requested (ABOVE, BELOW), then reject the Fat channel access This fixes http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1988 ("iwlwifi: checking for 40MHz mode" and "iwlwifi: check control channel for pure 40MHz" combine with this to address the above bug. -- JWL) Signed-off-by: Wey-Yi Guy Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-core.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index b122eedef369..6ab07165ea28 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -629,13 +629,9 @@ u8 iwl_is_fat_tx_allowed(struct iwl_priv *priv, if (!sta_ht_inf->ht_supported) return 0; } - - if (iwl_ht_conf->ht_protection == IEEE80211_HT_OP_MODE_PROTECTION_20MHZ) - return 1; - else - return iwl_is_channel_extension(priv, priv->band, - le16_to_cpu(priv->staging_rxon.channel), - iwl_ht_conf->extension_chan_offset); + return iwl_is_channel_extension(priv, priv->band, + le16_to_cpu(priv->staging_rxon.channel), + iwl_ht_conf->extension_chan_offset); } EXPORT_SYMBOL(iwl_is_fat_tx_allowed); -- cgit v1.2.2 From 8a9b99267cb3b51d4e59693c03e1204d86b42445 Mon Sep 17 00:00:00 2001 From: Abhijeet Kolekar Date: Fri, 12 Jun 2009 13:22:52 -0700 Subject: iwlwifi/iwl3945: fix suspend resume association bug Patch fixes the following bugs at http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=2005 http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=2007 If we suspend with an association and then resumed, we need to synchronize the active rxon with staging rxon, else we will get an error when iwl_alive_start try to commit rxon and staging is set to channel 0. Before going to suspend staging and active rxon are in sync. After resuming from the suspend, iwl_mac_start is called and it clears the staging rxon. Patch fixes the bug by not clearing the staging rxon in iwl_mac_start. Patch also adds similar fix to 3945. Signed-off-by: Abhijeet Kolekar Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn.c | 1 - drivers/net/wireless/iwlwifi/iwl3945-base.c | 4 +--- 2 files changed, 1 insertion(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index a5637c4aa85d..6d1519e1f011 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -2152,7 +2152,6 @@ static int iwl_mac_start(struct ieee80211_hw *hw) /* we should be verifying the device is ready to be opened */ mutex_lock(&priv->mutex); - memset(&priv->staging_rxon, 0, sizeof(struct iwl_rxon_cmd)); /* fetch ucode file from disk, alloc and copy to bus-master buffers ... * ucode filename and max sizes are card-specific. */ diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 83d31606dd00..cb9bd4c8f25e 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -2498,8 +2498,7 @@ static void iwl3945_alive_start(struct iwl_priv *priv) struct iwl3945_rxon_cmd *active_rxon = (struct iwl3945_rxon_cmd *)(&priv->active_rxon); - memcpy(&priv->staging_rxon, &priv->active_rxon, - sizeof(priv->staging_rxon)); + priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK; active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK; } else { /* Initialize our rx_config data */ @@ -3147,7 +3146,6 @@ static int iwl3945_mac_start(struct ieee80211_hw *hw) /* we should be verifying the device is ready to be opened */ mutex_lock(&priv->mutex); - memset(&priv->staging_rxon, 0, sizeof(priv->staging_rxon)); /* fetch ucode file from disk, alloc and copy to bus-master buffers ... * ucode filename and max sizes are card-specific. */ -- cgit v1.2.2 From 35edf8aae8f903b154d658b9a7eed0d5c1a4a814 Mon Sep 17 00:00:00 2001 From: Nick Kossifidis Date: Fri, 12 Jun 2009 16:09:53 -0700 Subject: ath5k: fix mesh beaconing This patch is from Nick Kossifidis but he forgot to send it. It ensures that the beacon queue gets started in mesh mode as well, otherwise ath5k will not beacon in mesh point mode. At this time, we still need to issue a scan before mesh beaconing will work but that appears to be a separate problem. Signed-off-by: Andrey Yurovsky Signed-off-by: Nick Kossifidis Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/pcu.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath5k/pcu.c b/drivers/net/wireless/ath/ath5k/pcu.c index ec35503f6a40..2942f13c9c4a 100644 --- a/drivers/net/wireless/ath/ath5k/pcu.c +++ b/drivers/net/wireless/ath/ath5k/pcu.c @@ -733,8 +733,9 @@ void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval) /* * Set the beacon register and enable all timers. */ - /* When in AP mode zero timer0 to start TSF */ - if (ah->ah_op_mode == NL80211_IFTYPE_AP) + /* When in AP or Mesh Point mode zero timer0 to start TSF */ + if (ah->ah_op_mode == NL80211_IFTYPE_AP || + ah->ah_op_mode == NL80211_IFTYPE_MESH_POINT) ath5k_hw_reg_write(ah, 0, AR5K_TIMER0); ath5k_hw_reg_write(ah, next_beacon, AR5K_TIMER0); -- cgit v1.2.2 From 82880a7cf9c059c11cd6ad1868c48969956f966b Mon Sep 17 00:00:00 2001 From: Vasanthakumar Thiagarajan Date: Sat, 13 Jun 2009 14:50:24 +0530 Subject: ath9k: Add helper to get ath9k specific current channel Signed-off-by: Vasanthakumar Thiagarajan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index f7baa406918b..89bf07e66d10 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -231,6 +231,19 @@ static void ath_setup_rates(struct ath_softc *sc, enum ieee80211_band band) } } +static struct ath9k_channel *ath_get_curchannel(struct ath_softc *sc, + struct ieee80211_hw *hw) +{ + struct ieee80211_channel *curchan = hw->conf.channel; + struct ath9k_channel *channel; + u8 chan_idx; + + chan_idx = curchan->hw_value; + channel = &sc->sc_ah->channels[chan_idx]; + ath9k_update_ichannel(sc, hw, channel); + return channel; +} + /* * Set/change channels. If the channel is really being changed, it's done * by reseting the chip. To accomplish this we must first cleanup any pending @@ -1920,7 +1933,7 @@ static int ath9k_start(struct ieee80211_hw *hw) struct ath_softc *sc = aphy->sc; struct ieee80211_channel *curchan = hw->conf.channel; struct ath9k_channel *init_channel; - int r, pos; + int r; DPRINTF(sc, ATH_DBG_CONFIG, "Starting driver with " "initial channel: %d MHz\n", curchan->center_freq); @@ -1950,11 +1963,9 @@ static int ath9k_start(struct ieee80211_hw *hw) /* setup initial channel */ - pos = curchan->hw_value; + sc->chan_idx = curchan->hw_value; - sc->chan_idx = pos; - init_channel = &sc->sc_ah->channels[pos]; - ath9k_update_ichannel(sc, hw, init_channel); + init_channel = ath_get_curchannel(sc, hw); /* Reset SERDES registers */ ath9k_hw_configpcipowersave(sc->sc_ah, 0); -- cgit v1.2.2 From 159cd468bc885f7a2fbc75bbfe782782e52ef9c9 Mon Sep 17 00:00:00 2001 From: Vasanthakumar Thiagarajan Date: Sat, 13 Jun 2009 14:50:25 +0530 Subject: ath9k: Make sure we have current channel in ah_curchan before rf disable/enable Signed-off-by: Vasanthakumar Thiagarajan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 89bf07e66d10..6516a426f6ce 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1123,6 +1123,9 @@ void ath_radio_enable(struct ath_softc *sc) ath9k_ps_wakeup(sc); ath9k_hw_configpcipowersave(ah, 0); + if (!ah->curchan) + ah->curchan = ath_get_curchannel(sc, sc->hw); + spin_lock_bh(&sc->sc_resetlock); r = ath9k_hw_reset(ah, ah->curchan, false); if (r) { @@ -1175,6 +1178,9 @@ void ath_radio_disable(struct ath_softc *sc) ath_stoprecv(sc); /* turn off frame recv */ ath_flushrecv(sc); /* flush recv queue */ + if (!ah->curchan) + ah->curchan = ath_get_curchannel(sc, sc->hw); + spin_lock_bh(&sc->sc_resetlock); r = ath9k_hw_reset(ah, ah->curchan, false); if (r) { -- cgit v1.2.2 From 3b319aae4244f9b4758212605f67cf63207a4fa1 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sat, 13 Jun 2009 14:50:26 +0530 Subject: ath9k: port to cfg80211 rfkill This ports the ath9k rfkill code to the new API offered by cfg80211 and thus removes a lot of useless stuff. ("With this series a kernel panic, which is a regression, during module unload disappears." -- Vasanthakumar Thiagarajan Other patches in the series: ath9k: Add helper to get ath9k specific current channel ath9k: Make sure we have current channel in ah_curchan before rf disable/enable -- JWL) Signed-off-by: Johannes Berg Cc: Luis Rodriguez Tested-by: Vasanthakumar Thiagarajan Signed-off-by: Vasanthakumar Thiagarajan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/Kconfig | 1 - drivers/net/wireless/ath/ath9k/ath9k.h | 9 ---- drivers/net/wireless/ath/ath9k/hw.c | 29 +++++------ drivers/net/wireless/ath/ath9k/hw.h | 3 -- drivers/net/wireless/ath/ath9k/main.c | 94 +++++----------------------------- 5 files changed, 26 insertions(+), 110 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig index 0ed1ac312aa6..2d79610bce12 100644 --- a/drivers/net/wireless/ath/ath9k/Kconfig +++ b/drivers/net/wireless/ath/ath9k/Kconfig @@ -1,7 +1,6 @@ config ATH9K tristate "Atheros 802.11n wireless cards support" depends on PCI && MAC80211 && WLAN_80211 - depends on RFKILL || RFKILL=n select ATH_COMMON select MAC80211_LEDS select LEDS_CLASS diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 515880aa2116..a6e65ff4bb2d 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -21,7 +21,6 @@ #include #include #include -#include #include "hw.h" #include "rc.h" @@ -460,12 +459,6 @@ struct ath_led { bool registered; }; -struct ath_rfkill { - struct rfkill *rfkill; - struct rfkill_ops ops; - char rfkill_name[32]; -}; - /********************/ /* Main driver core */ /********************/ @@ -505,7 +498,6 @@ struct ath_rfkill { #define SC_OP_PROTECT_ENABLE BIT(6) #define SC_OP_RXFLUSH BIT(7) #define SC_OP_LED_ASSOCIATED BIT(8) -#define SC_OP_RFKILL_REGISTERED BIT(9) #define SC_OP_WAIT_FOR_BEACON BIT(12) #define SC_OP_LED_ON BIT(13) #define SC_OP_SCANNING BIT(14) @@ -591,7 +583,6 @@ struct ath_softc { int beacon_interval; - struct ath_rfkill rf_kill; struct ath_ani ani; struct ath9k_node_stats nodestats; #ifdef CONFIG_ATH9K_DEBUG diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 1579c9407ed5..34935a8ee59d 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -2186,6 +2186,18 @@ static void ath9k_hw_spur_mitigate(struct ath_hw *ah, struct ath9k_channel *chan REG_WRITE(ah, AR_PHY_MASK2_P_61_45, tmp_mask); } +static void ath9k_enable_rfkill(struct ath_hw *ah) +{ + REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL, + AR_GPIO_INPUT_EN_VAL_RFSILENT_BB); + + REG_CLR_BIT(ah, AR_GPIO_INPUT_MUX2, + AR_GPIO_INPUT_MUX2_RFSILENT); + + ath9k_hw_cfg_gpio_input(ah, ah->rfkill_gpio); + REG_SET_BIT(ah, AR_PHY_TEST, RFSILENT_BB); +} + int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, bool bChannelChange) { @@ -2313,10 +2325,9 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, ath9k_hw_init_interrupt_masks(ah, ah->opmode); ath9k_hw_init_qos(ah); -#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) if (ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT) ath9k_enable_rfkill(ah); -#endif + ath9k_hw_init_user_settings(ah); REG_WRITE(ah, AR_STA_ID1, @@ -3613,20 +3624,6 @@ void ath9k_hw_set_gpio(struct ath_hw *ah, u32 gpio, u32 val) AR_GPIO_BIT(gpio)); } -#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) -void ath9k_enable_rfkill(struct ath_hw *ah) -{ - REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL, - AR_GPIO_INPUT_EN_VAL_RFSILENT_BB); - - REG_CLR_BIT(ah, AR_GPIO_INPUT_MUX2, - AR_GPIO_INPUT_MUX2_RFSILENT); - - ath9k_hw_cfg_gpio_input(ah, ah->rfkill_gpio); - REG_SET_BIT(ah, AR_PHY_TEST, RFSILENT_BB); -} -#endif - u32 ath9k_hw_getdefantenna(struct ath_hw *ah) { return REG_READ(ah, AR_DEF_ANTENNA) & 0x7; diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index dd8508ef6e05..9d0b31ad4603 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -565,9 +565,6 @@ u32 ath9k_hw_gpio_get(struct ath_hw *ah, u32 gpio); void ath9k_hw_cfg_output(struct ath_hw *ah, u32 gpio, u32 ah_signal_type); void ath9k_hw_set_gpio(struct ath_hw *ah, u32 gpio, u32 val); -#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) -void ath9k_enable_rfkill(struct ath_hw *ah); -#endif u32 ath9k_hw_getdefantenna(struct ath_hw *ah); void ath9k_hw_setantenna(struct ath_hw *ah, u32 antenna); bool ath9k_hw_setantennaswitch(struct ath_hw *ah, diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 6516a426f6ce..91c00486b2ac 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1197,8 +1197,6 @@ void ath_radio_disable(struct ath_softc *sc) ath9k_ps_restore(sc); } -#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) - /*******************/ /* Rfkill */ /*******************/ @@ -1211,81 +1209,27 @@ static bool ath_is_rfkill_set(struct ath_softc *sc) ah->rfkill_polarity; } -/* s/w rfkill handlers */ -static int ath_rfkill_set_block(void *data, bool blocked) -{ - struct ath_softc *sc = data; - - if (blocked) - ath_radio_disable(sc); - else - ath_radio_enable(sc); - - return 0; -} - -static void ath_rfkill_poll_state(struct rfkill *rfkill, void *data) +static void ath9k_rfkill_poll_state(struct ieee80211_hw *hw) { - struct ath_softc *sc = data; + struct ath_wiphy *aphy = hw->priv; + struct ath_softc *sc = aphy->sc; bool blocked = !!ath_is_rfkill_set(sc); - if (rfkill_set_hw_state(rfkill, blocked)) + wiphy_rfkill_set_hw_state(hw->wiphy, blocked); + + if (blocked) ath_radio_disable(sc); else ath_radio_enable(sc); } -/* Init s/w rfkill */ -static int ath_init_sw_rfkill(struct ath_softc *sc) +static void ath_start_rfkill_poll(struct ath_softc *sc) { - sc->rf_kill.ops.set_block = ath_rfkill_set_block; - if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT) - sc->rf_kill.ops.poll = ath_rfkill_poll_state; - - snprintf(sc->rf_kill.rfkill_name, sizeof(sc->rf_kill.rfkill_name), - "ath9k-%s::rfkill", wiphy_name(sc->hw->wiphy)); - - sc->rf_kill.rfkill = rfkill_alloc(sc->rf_kill.rfkill_name, - wiphy_dev(sc->hw->wiphy), - RFKILL_TYPE_WLAN, - &sc->rf_kill.ops, sc); - if (!sc->rf_kill.rfkill) { - DPRINTF(sc, ATH_DBG_FATAL, "Failed to allocate rfkill\n"); - return -ENOMEM; - } - - return 0; -} - -/* Deinitialize rfkill */ -static void ath_deinit_rfkill(struct ath_softc *sc) -{ - if (sc->sc_flags & SC_OP_RFKILL_REGISTERED) { - rfkill_unregister(sc->rf_kill.rfkill); - rfkill_destroy(sc->rf_kill.rfkill); - sc->sc_flags &= ~SC_OP_RFKILL_REGISTERED; - } -} - -static int ath_start_rfkill_poll(struct ath_softc *sc) -{ - if (!(sc->sc_flags & SC_OP_RFKILL_REGISTERED)) { - if (rfkill_register(sc->rf_kill.rfkill)) { - DPRINTF(sc, ATH_DBG_FATAL, - "Unable to register rfkill\n"); - rfkill_destroy(sc->rf_kill.rfkill); - - /* Deinitialize the device */ - ath_cleanup(sc); - return -EIO; - } else { - sc->sc_flags |= SC_OP_RFKILL_REGISTERED; - } - } + struct ath_hw *ah = sc->sc_ah; - return 0; + if (ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT) + wiphy_rfkill_start_polling(sc->hw->wiphy); } -#endif /* CONFIG_RFKILL */ void ath_cleanup(struct ath_softc *sc) { @@ -1305,9 +1249,6 @@ void ath_detach(struct ath_softc *sc) DPRINTF(sc, ATH_DBG_CONFIG, "Detach ATH hw\n"); -#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) - ath_deinit_rfkill(sc); -#endif ath_deinit_leds(sc); cancel_work_sync(&sc->chan_work); cancel_delayed_work_sync(&sc->wiphy_work); @@ -1645,13 +1586,6 @@ int ath_attach(u16 devid, struct ath_softc *sc) if (error != 0) goto error_attach; -#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) - /* Initialize s/w rfkill */ - error = ath_init_sw_rfkill(sc); - if (error) - goto error_attach; -#endif - INIT_WORK(&sc->chan_work, ath9k_wiphy_chan_work); INIT_DELAYED_WORK(&sc->wiphy_work, ath9k_wiphy_work); sc->wiphy_scheduler_int = msecs_to_jiffies(500); @@ -1667,6 +1601,7 @@ int ath_attach(u16 devid, struct ath_softc *sc) /* Initialize LED control */ ath_init_leds(sc); + ath_start_rfkill_poll(sc); return 0; @@ -2035,10 +1970,6 @@ static int ath9k_start(struct ieee80211_hw *hw) ieee80211_wake_queues(hw); -#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) - r = ath_start_rfkill_poll(sc); -#endif - mutex_unlock: mutex_unlock(&sc->mutex); @@ -2176,7 +2107,7 @@ static void ath9k_stop(struct ieee80211_hw *hw) } else sc->rx.rxlink = NULL; - rfkill_pause_polling(sc->rf_kill.rfkill); + wiphy_rfkill_stop_polling(sc->hw->wiphy); /* disable HAL and put h/w to sleep */ ath9k_hw_disable(sc->sc_ah); @@ -2782,6 +2713,7 @@ struct ieee80211_ops ath9k_ops = { .ampdu_action = ath9k_ampdu_action, .sw_scan_start = ath9k_sw_scan_start, .sw_scan_complete = ath9k_sw_scan_complete, + .rfkill_poll = ath9k_rfkill_poll_state, }; static struct { -- cgit v1.2.2 From 3989279ccc838c7357c75af6090f56f5cb555158 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Mon, 15 Jun 2009 17:49:09 +0200 Subject: ath9k: restore power mode on error path The ath9k_ps_{wakeup,restore} calls must be in balance. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 91c00486b2ac..9f49a3251d4d 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -296,7 +296,7 @@ int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw, "reset status %d\n", channel->center_freq, r); spin_unlock_bh(&sc->sc_resetlock); - return r; + goto ps_restore; } spin_unlock_bh(&sc->sc_resetlock); @@ -305,14 +305,17 @@ int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw, if (ath_startrecv(sc) != 0) { DPRINTF(sc, ATH_DBG_FATAL, "Unable to restart recv logic\n"); - return -EIO; + r = -EIO; + goto ps_restore; } ath_cache_conf_rate(sc, &hw->conf); ath_update_txpow(sc); ath9k_hw_set_interrupts(ah, sc->imask); + + ps_restore: ath9k_ps_restore(sc); - return 0; + return r; } /* -- cgit v1.2.2 From 7fe96a16486fb617a26b39a4895c7522c50fc555 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Mon, 15 Jun 2009 17:49:10 +0200 Subject: ath9k: prevent sleeping while we are waiting for CAB We have to remain awake if the SC_OP_WAIT_FOR_CAB flag is set. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ath9k.h | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index a6e65ff4bb2d..5efc9345ca0d 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -668,6 +668,7 @@ static inline void ath9k_ps_restore(struct ath_softc *sc) if (atomic_dec_and_test(&sc->ps_usecount)) if ((sc->hw->conf.flags & IEEE80211_CONF_PS) && !(sc->sc_flags & (SC_OP_WAIT_FOR_BEACON | + SC_OP_WAIT_FOR_CAB | SC_OP_WAIT_FOR_PSPOLL_DATA | SC_OP_WAIT_FOR_TX_ACK))) ath9k_hw_setpower(sc->sc_ah, -- cgit v1.2.2 From f0e9a8606ce60880249fd570fbebf4472c3d37c0 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Mon, 15 Jun 2009 17:49:11 +0200 Subject: ath9k: process rx packet if we are waiting for CAB If we are in PS mode, we have to process the received frame if the SC_OP_WAIT_FOR_CAB bit is set. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/recv.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 5014a19b0f75..f99f3a76df3f 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -817,6 +817,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) } if (unlikely(sc->sc_flags & (SC_OP_WAIT_FOR_BEACON | + SC_OP_WAIT_FOR_CAB | SC_OP_WAIT_FOR_PSPOLL_DATA))) ath_rx_ps(sc, skb); -- cgit v1.2.2 From 6cc90a5a6061428358d0f726a53fb44af5254111 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Thu, 11 Jun 2009 07:03:47 +0000 Subject: sky2: don't look for VPD size The code to compute VPD size didn't handle some systems that use chip without VPD. Also some of the newer chips use some additional registers to store the actual size, and wasn't worth putting the additional complexity in, so just remove the code. No big loss since the code to set the VPD size was only a convenience so that utilities would not read the extra space past the end of the available VPD. Move the first PCI config read earlier to detect bad hardware where it returns all ones and refuse loading driver before furthur damage. Signed-off-by: Stephen Hemminger Tested-by: Andy Whitcroft Signed-off-by: David S. Miller --- drivers/net/sky2.c | 31 ++++++++++++++++--------------- 1 file changed, 16 insertions(+), 15 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 6b5946fe8ae2..c6ceba95ace7 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -4364,6 +4364,22 @@ static int __devinit sky2_probe(struct pci_dev *pdev, goto err_out; } + /* Get configuration information + * Note: only regular PCI config access once to test for HW issues + * other PCI access through shared memory for speed and to + * avoid MMCONFIG problems. + */ + err = pci_read_config_dword(pdev, PCI_DEV_REG2, ®); + if (err) { + dev_err(&pdev->dev, "PCI read config failed\n"); + goto err_out; + } + + if (~reg == 0) { + dev_err(&pdev->dev, "PCI configuration read error\n"); + goto err_out; + } + err = pci_request_regions(pdev, DRV_NAME); if (err) { dev_err(&pdev->dev, "cannot obtain PCI resources\n"); @@ -4389,21 +4405,6 @@ static int __devinit sky2_probe(struct pci_dev *pdev, } } - /* Get configuration information - * Note: only regular PCI config access once to test for HW issues - * other PCI access through shared memory for speed and to - * avoid MMCONFIG problems. - */ - err = pci_read_config_dword(pdev, PCI_DEV_REG2, ®); - if (err) { - dev_err(&pdev->dev, "PCI read config failed\n"); - goto err_out_free_regions; - } - - /* size of available VPD, only impact sysfs */ - err = pci_vpd_truncate(pdev, 1ul << (((reg & PCI_VPD_ROM_SZ) >> 14) + 8)); - if (err) - dev_warn(&pdev->dev, "Can't set VPD size\n"); #ifdef __BIG_ENDIAN /* The sk98lin vendor driver uses hardware byte swapping but -- cgit v1.2.2 From 05e9e61a2e742d33ed24392d989fff912a68d04f Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 17 Jun 2009 01:36:23 -0700 Subject: sonic: Fix build after ndo_start_xmit() changes. Noticed by Stephen Rothwell. Signed-off-by: David S. Miller --- drivers/net/sonic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/sonic.c b/drivers/net/sonic.c index e4255d829380..753a1fba4609 100644 --- a/drivers/net/sonic.c +++ b/drivers/net/sonic.c @@ -223,7 +223,7 @@ static int sonic_send_packet(struct sk_buff *skb, struct net_device *dev) if (!laddr) { printk(KERN_ERR "%s: failed to map tx DMA buffer.\n", dev->name); dev_kfree_skb(skb); - return NETDEV_TX_BUSY + return NETDEV_TX_BUSY; } sonic_tda_put(dev, entry, SONIC_TD_STATUS, 0); /* clear status */ -- cgit v1.2.2 From 5dbc901172fb952409940cd7ca55d8e6e5a7cc2c Mon Sep 17 00:00:00 2001 From: Sivakumar Subramani Date: Tue, 16 Jun 2009 18:48:55 +0000 Subject: vxge: Enable SRIOV support in the driver. - Enabled SRIOV support in the driver. - Call __vxge_hw_verify_pci_e_info() for the PF only. This function verifies the negotiated link width and current link speed in the Link Status Register (offset 12h) which are reserved fields for VFs as per the SRIOV specification, section 3.5.8. - Implemented David Miller's comment to remove the #ifdef CONFIG_PCI_IOV as these intefaces have NOP versions declared when the defintion is not set. Signed-off-by: Sivakumar Subramani Signed-off-by: Rastapur Santosh Signed-off-by: Ramkrishna Vepa Signed-off-by: David S. Miller --- drivers/net/vxge/vxge-config.c | 12 +++++++----- drivers/net/vxge/vxge-main.c | 13 +++++++++++++ drivers/net/vxge/vxge-version.h | 4 ++-- 3 files changed, 22 insertions(+), 7 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/vxge/vxge-config.c b/drivers/net/vxge/vxge-config.c index 26cde573af43..58d2551c78ed 100644 --- a/drivers/net/vxge/vxge-config.c +++ b/drivers/net/vxge/vxge-config.c @@ -454,7 +454,7 @@ __vxge_hw_verify_pci_e_info(struct __vxge_hw_device *hldev) return VXGE_HW_OK; } -static enum vxge_hw_status +enum vxge_hw_status __vxge_hw_device_is_privilaged(struct __vxge_hw_device *hldev) { if ((hldev->host_type == VXGE_HW_NO_MR_NO_SR_NORMAL_FUNCTION || @@ -676,10 +676,12 @@ enum vxge_hw_status __vxge_hw_device_initialize(struct __vxge_hw_device *hldev) { enum vxge_hw_status status = VXGE_HW_OK; - /* Validate the pci-e link width and speed */ - status = __vxge_hw_verify_pci_e_info(hldev); - if (status != VXGE_HW_OK) - goto exit; + if (VXGE_HW_OK == __vxge_hw_device_is_privilaged(hldev)) { + /* Validate the pci-e link width and speed */ + status = __vxge_hw_verify_pci_e_info(hldev); + if (status != VXGE_HW_OK) + goto exit; + } vxge_hw_wrr_rebalance(hldev); exit: diff --git a/drivers/net/vxge/vxge-main.c b/drivers/net/vxge/vxge-main.c index 6c838b3e063a..6034497536a4 100644 --- a/drivers/net/vxge/vxge-main.c +++ b/drivers/net/vxge/vxge-main.c @@ -4203,6 +4203,16 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre) max_vpath_supported++; } + /* Enable SRIOV mode, if firmware has SRIOV support and if it is a PF */ + if ((VXGE_HW_FUNCTION_MODE_SRIOV == + ll_config.device_hw_info.function_mode) && + (max_config_dev > 1) && (pdev->is_physfn)) { + ret = pci_enable_sriov(pdev, max_config_dev - 1); + if (ret) + vxge_debug_ll_config(VXGE_ERR, + "Failed to enable SRIOV: %d \n", ret); + } + /* * Configure vpaths and get driver configured number of vpaths * which is less than or equal to the maximum vpaths per function. @@ -4366,6 +4376,7 @@ _exit6: vxge_device_unregister(hldev); _exit5: + pci_disable_sriov(pdev); vxge_hw_device_terminate(hldev); _exit4: iounmap(attr.bar1); @@ -4429,6 +4440,8 @@ vxge_remove(struct pci_dev *pdev) iounmap(vdev->bar0); iounmap(vdev->bar1); + pci_disable_sriov(pdev); + /* we are safe to free it now */ free_netdev(dev); diff --git a/drivers/net/vxge/vxge-version.h b/drivers/net/vxge/vxge-version.h index 7da02c545ed5..82786ffb7dd9 100644 --- a/drivers/net/vxge/vxge-version.h +++ b/drivers/net/vxge/vxge-version.h @@ -17,7 +17,7 @@ #define VXGE_VERSION_MAJOR "2" #define VXGE_VERSION_MINOR "0" -#define VXGE_VERSION_FIX "1" -#define VXGE_VERSION_BUILD "17129" +#define VXGE_VERSION_FIX "4" +#define VXGE_VERSION_BUILD "17795" #define VXGE_VERSION_FOR "k" #endif -- cgit v1.2.2 From d77eeb702cba0fa6efaf5689fce8939aa617f410 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Mon, 15 Jun 2009 23:33:24 +0000 Subject: net: fix network drivers ndo_start_xmit() return values Fix up remaining drivers returning a magic or an errno value from their ndo_start_xmit() functions that were missed in the first pass: - isdn_net: missed conversion - bpqether: missed conversion: skb is freed, so return NETDEV_TX_OK - hp100: intention appears to be to resubmit skb once resources are available, but due to no queue handling it is dropped for now. - lapbether: skb is freed, so return NETDEV_TX_OK Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- drivers/net/hamradio/bpqether.c | 2 +- drivers/net/hp100.c | 35 +++++++++++++++++------------------ drivers/net/wan/lapbether.c | 16 +++++----------- 3 files changed, 23 insertions(+), 30 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/hamradio/bpqether.c b/drivers/net/hamradio/bpqether.c index 5105548ad50c..abcd19a8bff9 100644 --- a/drivers/net/hamradio/bpqether.c +++ b/drivers/net/hamradio/bpqether.c @@ -260,7 +260,7 @@ static int bpq_xmit(struct sk_buff *skb, struct net_device *dev) */ if (!netif_running(dev)) { kfree_skb(skb); - return -ENODEV; + return NETDEV_TX_OK; } skb_pull(skb, 1); diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c index 8feda9fe8297..1d3429a415e6 100644 --- a/drivers/net/hp100.c +++ b/drivers/net/hp100.c @@ -1495,13 +1495,8 @@ static int hp100_start_xmit_bm(struct sk_buff *skb, struct net_device *dev) hp100_outw(0x4210, TRACE); printk("hp100: %s: start_xmit_bm\n", dev->name); #endif - - if (skb == NULL) { - return 0; - } - if (skb->len <= 0) - return 0; + goto drop; if (lp->chip == HP100_CHIPID_SHASTA && skb_padto(skb, ETH_ZLEN)) return 0; @@ -1514,10 +1509,10 @@ static int hp100_start_xmit_bm(struct sk_buff *skb, struct net_device *dev) #endif /* not waited long enough since last tx? */ if (time_before(jiffies, dev->trans_start + HZ)) - return -EAGAIN; + goto drop; if (hp100_check_lan(dev)) - return -EIO; + goto drop; if (lp->lan_type == HP100_LAN_100 && lp->hub_status < 0) { /* we have a 100Mb/s adapter but it isn't connected to hub */ @@ -1551,7 +1546,7 @@ static int hp100_start_xmit_bm(struct sk_buff *skb, struct net_device *dev) } dev->trans_start = jiffies; - return -EAGAIN; + goto drop; } /* @@ -1591,6 +1586,10 @@ static int hp100_start_xmit_bm(struct sk_buff *skb, struct net_device *dev) dev->trans_start = jiffies; return 0; + +drop: + dev_kfree_skb(skb); + return NETDEV_TX_OK; } @@ -1648,16 +1647,11 @@ static int hp100_start_xmit(struct sk_buff *skb, struct net_device *dev) hp100_outw(0x4212, TRACE); printk("hp100: %s: start_xmit\n", dev->name); #endif - - if (skb == NULL) { - return 0; - } - if (skb->len <= 0) - return 0; + goto drop; if (hp100_check_lan(dev)) - return -EIO; + goto drop; /* If there is not enough free memory on the card... */ i = hp100_inl(TX_MEM_FREE) & 0x7fffffff; @@ -1671,7 +1665,7 @@ static int hp100_start_xmit(struct sk_buff *skb, struct net_device *dev) printk("hp100: %s: trans_start timing problem\n", dev->name); #endif - return -EAGAIN; + goto drop; } if (lp->lan_type == HP100_LAN_100 && lp->hub_status < 0) { /* we have a 100Mb/s adapter but it isn't connected to hub */ @@ -1705,7 +1699,7 @@ static int hp100_start_xmit(struct sk_buff *skb, struct net_device *dev) } } dev->trans_start = jiffies; - return -EAGAIN; + goto drop; } for (i = 0; i < 6000 && (hp100_inb(OPTION_MSW) & HP100_TX_CMD); i++) { @@ -1759,6 +1753,11 @@ static int hp100_start_xmit(struct sk_buff *skb, struct net_device *dev) #endif return 0; + +drop: + dev_kfree_skb(skb); + return NETDEV_TX_OK; + } diff --git a/drivers/net/wan/lapbether.c b/drivers/net/wan/lapbether.c index 2dd78d20eb05..aff4f6bdf3d5 100644 --- a/drivers/net/wan/lapbether.c +++ b/drivers/net/wan/lapbether.c @@ -149,46 +149,40 @@ static int lapbeth_data_indication(struct net_device *dev, struct sk_buff *skb) */ static int lapbeth_xmit(struct sk_buff *skb, struct net_device *dev) { - int err = -ENODEV; + int err; /* * Just to be *really* sure not to send anything if the interface * is down, the ethernet device may have gone. */ - if (!netif_running(dev)) { + if (!netif_running(dev)) goto drop; - } switch (skb->data[0]) { case 0x00: - err = 0; break; case 0x01: if ((err = lapb_connect_request(dev)) != LAPB_OK) printk(KERN_ERR "lapbeth: lapb_connect_request " "error: %d\n", err); - goto drop_ok; + goto drop; case 0x02: if ((err = lapb_disconnect_request(dev)) != LAPB_OK) printk(KERN_ERR "lapbeth: lapb_disconnect_request " "err: %d\n", err); /* Fall thru */ default: - goto drop_ok; + goto drop; } skb_pull(skb, 1); if ((err = lapb_data_request(dev, skb)) != LAPB_OK) { printk(KERN_ERR "lapbeth: lapb_data_request error - %d\n", err); - err = -ENOMEM; goto drop; } - err = 0; out: - return err; -drop_ok: - err = 0; + return NETDEV_TX_OK; drop: kfree_skb(skb); goto out; -- cgit v1.2.2 From 1d4ac5d5ef9dd965ae211ebe8acbf83dc4d9571b Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 16 Jun 2009 16:56:33 +0000 Subject: phy_device: fix parameter name in kernel-doc Fix kernel-doc parameter name in phy_device.c. Signed-off-by: Randy Dunlap Signed-off-by: David S. Miller --- drivers/net/phy/phy_device.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index a2ece89622d6..eba937c46376 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -244,7 +244,7 @@ EXPORT_SYMBOL(get_phy_device); /** * phy_device_register - Register the phy device on the MDIO bus - * @phy_device: phy_device structure to be added to the MDIO bus + * @phydev: phy_device structure to be added to the MDIO bus */ int phy_device_register(struct phy_device *phydev) { -- cgit v1.2.2 From f3a32500ba8f3ec9ee0c12836fcfd315f1256db4 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Wed, 17 Jun 2009 13:16:04 +0000 Subject: Revert "net/ucc_geth: Add SGMII support for UEC GETH driver" This reverts commit 047584ce94108012288554a5f84585d792cc7f8f. This patch meshes badly with "net: Rework ucc_geth driver to use of_mdio infrastructure" (0b9da337dca972e7a4144e298ec3adb8f244d4a4). Since most of the patch needs to be reworked, it is clearer to revert the patch and then apply the corrected version Signed-off-by: Grant Likely Signed-off-by: David S. Miller --- drivers/net/ucc_geth.c | 79 +------------------------------------------------- drivers/net/ucc_geth.h | 28 +----------------- 2 files changed, 2 insertions(+), 105 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c index fd6140bd9aae..0cf22c4f123b 100644 --- a/drivers/net/ucc_geth.c +++ b/drivers/net/ucc_geth.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2006-2009 Freescale Semicondutor, Inc. All rights reserved. + * Copyright (C) 2006-2007 Freescale Semicondutor, Inc. All rights reserved. * * Author: Shlomi Gridish * Li Yang @@ -65,8 +65,6 @@ static DEFINE_SPINLOCK(ugeth_lock); -static void uec_configure_serdes(struct net_device *dev); - static struct { u32 msg_enable; } debug = { -1 }; @@ -1412,9 +1410,6 @@ static int adjust_enet_interface(struct ucc_geth_private *ugeth) (ugeth->phy_interface == PHY_INTERFACE_MODE_RTBI)) { upsmr |= UCC_GETH_UPSMR_TBIM; } - if ((ugeth->phy_interface == PHY_INTERFACE_MODE_SGMII)) - upsmr |= UCC_GETH_UPSMR_SGMM; - out_be32(&uf_regs->upsmr, upsmr); /* Disable autonegotiation in tbi mode, because by default it @@ -1559,9 +1554,6 @@ static int init_phy(struct net_device *dev) return -ENODEV; } - if (priv->phy_interface == PHY_INTERFACE_MODE_SGMII) - uec_configure_serdes(dev); - phydev->supported &= (ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | ADVERTISED_100baseT_Half | @@ -1577,41 +1569,7 @@ static int init_phy(struct net_device *dev) return 0; } -/* Initialize TBI PHY interface for communicating with the - * SERDES lynx PHY on the chip. We communicate with this PHY - * through the MDIO bus on each controller, treating it as a - * "normal" PHY at the address found in the UTBIPA register. We assume - * that the UTBIPA register is valid. Either the MDIO bus code will set - * it to a value that doesn't conflict with other PHYs on the bus, or the - * value doesn't matter, as there are no other PHYs on the bus. - */ -static void uec_configure_serdes(struct net_device *dev) -{ - struct ucc_geth_private *ugeth = netdev_priv(dev); - - if (!ugeth->tbiphy) { - printk(KERN_WARNING "SGMII mode requires that the device " - "tree specify a tbi-handle\n"); - return; - } - - /* - * If the link is already up, we must already be ok, and don't need to - * configure and reset the TBI<->SerDes link. Maybe U-Boot configured - * everything for us? Resetting it takes the link down and requires - * several seconds for it to come back. - */ - if (phy_read(ugeth->tbiphy, ENET_TBI_MII_SR) & TBISR_LSTATUS) - return; - - /* Single clk mode, mii mode off(for serdes communication) */ - phy_write(ugeth->tbiphy, ENET_TBI_MII_ANA, TBIANA_SETTINGS); - phy_write(ugeth->tbiphy, ENET_TBI_MII_TBICON, TBICON_CLK_SELECT); - - phy_write(ugeth->tbiphy, ENET_TBI_MII_CR, TBICR_SETTINGS); - -} static int ugeth_graceful_stop_tx(struct ucc_geth_private *ugeth) { @@ -3565,8 +3523,6 @@ static phy_interface_t to_phy_interface(const char *phy_connection_type) return PHY_INTERFACE_MODE_RGMII_RXID; if (strcasecmp(phy_connection_type, "rtbi") == 0) return PHY_INTERFACE_MODE_RTBI; - if (strcasecmp(phy_connection_type, "sgmii") == 0) - return PHY_INTERFACE_MODE_SGMII; return PHY_INTERFACE_MODE_MII; } @@ -3611,7 +3567,6 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma PHY_INTERFACE_MODE_RMII, PHY_INTERFACE_MODE_RGMII, PHY_INTERFACE_MODE_GMII, PHY_INTERFACE_MODE_RGMII, PHY_INTERFACE_MODE_TBI, PHY_INTERFACE_MODE_RTBI, - PHY_INTERFACE_MODE_SGMII, }; ugeth_vdbg("%s: IN", __func__); @@ -3727,7 +3682,6 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma case PHY_INTERFACE_MODE_RGMII_TXID: case PHY_INTERFACE_MODE_TBI: case PHY_INTERFACE_MODE_RTBI: - case PHY_INTERFACE_MODE_SGMII: max_speed = SPEED_1000; break; default: @@ -3802,37 +3756,6 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma ugeth->ndev = dev; ugeth->node = np; - /* Find the TBI PHY. If it's not there, we don't support SGMII */ - ph = of_get_property(np, "tbi-handle", NULL); - if (ph) { - struct device_node *tbi = of_find_node_by_phandle(*ph); - struct of_device *ofdev; - struct mii_bus *bus; - const unsigned int *id; - - if (!tbi) - return 0; - - mdio = of_get_parent(tbi); - if (!mdio) - return 0; - - ofdev = of_find_device_by_node(mdio); - - of_node_put(mdio); - - id = of_get_property(tbi, "reg", NULL); - if (!id) - return 0; - of_node_put(tbi); - - bus = dev_get_drvdata(&ofdev->dev); - if (!bus) - return 0; - - ugeth->tbiphy = bus->phy_map[*id]; - } - return 0; } diff --git a/drivers/net/ucc_geth.h b/drivers/net/ucc_geth.h index deb962bb68ef..dca628a922ba 100644 --- a/drivers/net/ucc_geth.h +++ b/drivers/net/ucc_geth.h @@ -1,5 +1,5 @@ /* - * Copyright (C) Freescale Semicondutor, Inc. 2006-2009. All rights reserved. + * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved. * * Author: Shlomi Gridish * @@ -193,31 +193,6 @@ struct ucc_geth { #define ENET_TBI_MII_JD 0x10 /* Jitter diagnostics */ #define ENET_TBI_MII_TBICON 0x11 /* TBI control */ -/* TBI MDIO register bit fields*/ -#define TBISR_LSTATUS 0x0004 -#define TBICON_CLK_SELECT 0x0020 -#define TBIANA_ASYMMETRIC_PAUSE 0x0100 -#define TBIANA_SYMMETRIC_PAUSE 0x0080 -#define TBIANA_HALF_DUPLEX 0x0040 -#define TBIANA_FULL_DUPLEX 0x0020 -#define TBICR_PHY_RESET 0x8000 -#define TBICR_ANEG_ENABLE 0x1000 -#define TBICR_RESTART_ANEG 0x0200 -#define TBICR_FULL_DUPLEX 0x0100 -#define TBICR_SPEED1_SET 0x0040 - -#define TBIANA_SETTINGS ( \ - TBIANA_ASYMMETRIC_PAUSE \ - | TBIANA_SYMMETRIC_PAUSE \ - | TBIANA_FULL_DUPLEX \ - ) -#define TBICR_SETTINGS ( \ - TBICR_PHY_RESET \ - | TBICR_ANEG_ENABLE \ - | TBICR_FULL_DUPLEX \ - | TBICR_SPEED1_SET \ - ) - /* UCC GETH MACCFG1 (MAC Configuration 1 Register) */ #define MACCFG1_FLOW_RX 0x00000020 /* Flow Control Rx */ @@ -1213,7 +1188,6 @@ struct ucc_geth_private { struct ugeth_mii_info *mii_info; struct phy_device *phydev; - struct phy_device *tbiphy; phy_interface_t phy_interface; int max_speed; uint32_t msg_enable; -- cgit v1.2.2 From fb1001f3de1a8576b25d929502f1fe7865ff32dc Mon Sep 17 00:00:00 2001 From: Haiying Wang Date: Wed, 17 Jun 2009 13:16:10 +0000 Subject: net/ucc_geth: Add SGMII support for UCC GETH driver -- derived from reverted commit 047584ce94108012288554a5f84585d792cc7f8f -- reworked by Grant Likely to play nice with commit: "net: Rework ucc_geth driver to use of_mdio infrastructure" (0b9da337dca972e7a4144e298ec3adb8f244d4a4) Signed-off-by: Haiying Wang Signed-off-by: David S. Miller Signed-off-by: Grant Likely Signed-off-by: David S. Miller --- drivers/net/ucc_geth.c | 58 +++++++++++++++++++++++++++++++++++++++++++++++++- drivers/net/ucc_geth.h | 28 +++++++++++++++++++++++- 2 files changed, 84 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c index 0cf22c4f123b..255d28d4f84e 100644 --- a/drivers/net/ucc_geth.c +++ b/drivers/net/ucc_geth.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2006-2007 Freescale Semicondutor, Inc. All rights reserved. + * Copyright (C) 2006-2009 Freescale Semicondutor, Inc. All rights reserved. * * Author: Shlomi Gridish * Li Yang @@ -1410,6 +1410,9 @@ static int adjust_enet_interface(struct ucc_geth_private *ugeth) (ugeth->phy_interface == PHY_INTERFACE_MODE_RTBI)) { upsmr |= UCC_GETH_UPSMR_TBIM; } + if ((ugeth->phy_interface == PHY_INTERFACE_MODE_SGMII)) + upsmr |= UCC_GETH_UPSMR_SGMM; + out_be32(&uf_regs->upsmr, upsmr); /* Disable autonegotiation in tbi mode, because by default it @@ -1531,6 +1534,49 @@ static void adjust_link(struct net_device *dev) spin_unlock_irqrestore(&ugeth->lock, flags); } +/* Initialize TBI PHY interface for communicating with the + * SERDES lynx PHY on the chip. We communicate with this PHY + * through the MDIO bus on each controller, treating it as a + * "normal" PHY at the address found in the UTBIPA register. We assume + * that the UTBIPA register is valid. Either the MDIO bus code will set + * it to a value that doesn't conflict with other PHYs on the bus, or the + * value doesn't matter, as there are no other PHYs on the bus. + */ +static void uec_configure_serdes(struct net_device *dev) +{ + struct ucc_geth_private *ugeth = netdev_priv(dev); + struct ucc_geth_info *ug_info = ugeth->ug_info; + struct phy_device *tbiphy; + + if (!ug_info->tbi_node) { + dev_warn(&dev->dev, "SGMII mode requires that the device " + "tree specify a tbi-handle\n"); + return; + } + + tbiphy = of_phy_find_device(ug_info->tbi_node); + if (!tbiphy) { + dev_err(&dev->dev, "error: Could not get TBI device\n"); + return; + } + + /* + * If the link is already up, we must already be ok, and don't need to + * configure and reset the TBI<->SerDes link. Maybe U-Boot configured + * everything for us? Resetting it takes the link down and requires + * several seconds for it to come back. + */ + if (phy_read(tbiphy, ENET_TBI_MII_SR) & TBISR_LSTATUS) + return; + + /* Single clk mode, mii mode off(for serdes communication) */ + phy_write(tbiphy, ENET_TBI_MII_ANA, TBIANA_SETTINGS); + + phy_write(tbiphy, ENET_TBI_MII_TBICON, TBICON_CLK_SELECT); + + phy_write(tbiphy, ENET_TBI_MII_CR, TBICR_SETTINGS); +} + /* Configure the PHY for dev. * returns 0 if success. -1 if failure */ @@ -1554,6 +1600,9 @@ static int init_phy(struct net_device *dev) return -ENODEV; } + if (priv->phy_interface == PHY_INTERFACE_MODE_SGMII) + uec_configure_serdes(dev); + phydev->supported &= (ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | ADVERTISED_100baseT_Half | @@ -3523,6 +3572,8 @@ static phy_interface_t to_phy_interface(const char *phy_connection_type) return PHY_INTERFACE_MODE_RGMII_RXID; if (strcasecmp(phy_connection_type, "rtbi") == 0) return PHY_INTERFACE_MODE_RTBI; + if (strcasecmp(phy_connection_type, "sgmii") == 0) + return PHY_INTERFACE_MODE_SGMII; return PHY_INTERFACE_MODE_MII; } @@ -3567,6 +3618,7 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma PHY_INTERFACE_MODE_RMII, PHY_INTERFACE_MODE_RGMII, PHY_INTERFACE_MODE_GMII, PHY_INTERFACE_MODE_RGMII, PHY_INTERFACE_MODE_TBI, PHY_INTERFACE_MODE_RTBI, + PHY_INTERFACE_MODE_SGMII, }; ugeth_vdbg("%s: IN", __func__); @@ -3658,6 +3710,9 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma } ug_info->phy_node = phy; + /* Find the TBI PHY node. If it's not there, we don't support SGMII */ + ug_info->tbi_node = of_parse_phandle(np, "tbi-handle", 0); + /* get the phy interface type, or default to MII */ prop = of_get_property(np, "phy-connection-type", NULL); if (!prop) { @@ -3682,6 +3737,7 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma case PHY_INTERFACE_MODE_RGMII_TXID: case PHY_INTERFACE_MODE_TBI: case PHY_INTERFACE_MODE_RTBI: + case PHY_INTERFACE_MODE_SGMII: max_speed = SPEED_1000; break; default: diff --git a/drivers/net/ucc_geth.h b/drivers/net/ucc_geth.h index dca628a922ba..1525bf51341c 100644 --- a/drivers/net/ucc_geth.h +++ b/drivers/net/ucc_geth.h @@ -1,5 +1,5 @@ /* - * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved. + * Copyright (C) Freescale Semicondutor, Inc. 2006-2009. All rights reserved. * * Author: Shlomi Gridish * @@ -193,6 +193,31 @@ struct ucc_geth { #define ENET_TBI_MII_JD 0x10 /* Jitter diagnostics */ #define ENET_TBI_MII_TBICON 0x11 /* TBI control */ +/* TBI MDIO register bit fields*/ +#define TBISR_LSTATUS 0x0004 +#define TBICON_CLK_SELECT 0x0020 +#define TBIANA_ASYMMETRIC_PAUSE 0x0100 +#define TBIANA_SYMMETRIC_PAUSE 0x0080 +#define TBIANA_HALF_DUPLEX 0x0040 +#define TBIANA_FULL_DUPLEX 0x0020 +#define TBICR_PHY_RESET 0x8000 +#define TBICR_ANEG_ENABLE 0x1000 +#define TBICR_RESTART_ANEG 0x0200 +#define TBICR_FULL_DUPLEX 0x0100 +#define TBICR_SPEED1_SET 0x0040 + +#define TBIANA_SETTINGS ( \ + TBIANA_ASYMMETRIC_PAUSE \ + | TBIANA_SYMMETRIC_PAUSE \ + | TBIANA_FULL_DUPLEX \ + ) +#define TBICR_SETTINGS ( \ + TBICR_PHY_RESET \ + | TBICR_ANEG_ENABLE \ + | TBICR_FULL_DUPLEX \ + | TBICR_SPEED1_SET \ + ) + /* UCC GETH MACCFG1 (MAC Configuration 1 Register) */ #define MACCFG1_FLOW_RX 0x00000020 /* Flow Control Rx */ @@ -1100,6 +1125,7 @@ struct ucc_geth_info { u16 pausePeriod; u16 extensionField; struct device_node *phy_node; + struct device_node *tbi_node; u8 weightfactor[NUM_TX_QUEUES]; u8 interruptcoalescingmaxvalue[NUM_RX_QUEUES]; u8 l2qt[UCC_GETH_VLAN_PRIORITY_MAX]; -- cgit v1.2.2 From c2f3f3a2fe4e35db352cfe1176e384e36bfd91b1 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?fran=C3=A7ois=20romieu?= Date: Wed, 17 Jun 2009 11:43:11 +0000 Subject: sis190: use an adequate phy list entry as a fallback When sis190 driver is trying to get default phy, if it doesn't find home or lan phy, it falls back to the first phy in the phy list but list_entry() points to a bogus entry. list_first_entry() should be used instead. Signed-off-by: Arnaud Patard Acked-off-by: Francois Romieu Signed-off-by: David S. Miller --- drivers/net/sis190.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c index e2247669a495..1f040e8a000b 100644 --- a/drivers/net/sis190.c +++ b/drivers/net/sis190.c @@ -1281,7 +1281,7 @@ static u16 sis190_default_phy(struct net_device *dev) else if (phy_lan) phy_default = phy_lan; else - phy_default = list_entry(&tp->first_phy, + phy_default = list_first_entry(&tp->first_phy, struct sis190_phy, list); } -- cgit v1.2.2 From 4bb3f522077f6b10531451f50c376d6137ebd364 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?fran=C3=A7ois=20romieu?= Date: Wed, 17 Jun 2009 11:41:45 +0000 Subject: r8169: do not bring device down when suspending Stopping all activity through ChipCmd and blindly acking the irqs is neither nice nor completely needed: the transition to low-power mode does enough work and it apparently keeps the device in a sane state. Patch suggested by a fix for http://bugzilla.kernel.org/show_bug.cgi?id=9512 The rtl_shutdown path is kept unchanged so far. Signed-off-by: Francois Romieu Tested-by: Anders Eriksson Cc: Edward Hsu Signed-off-by: David S. Miller --- drivers/net/r8169.c | 19 ++++++++----------- 1 file changed, 8 insertions(+), 11 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 35196faa084e..4e22462684c9 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -3811,22 +3811,11 @@ static struct net_device_stats *rtl8169_get_stats(struct net_device *dev) static void rtl8169_net_suspend(struct net_device *dev) { - struct rtl8169_private *tp = netdev_priv(dev); - void __iomem *ioaddr = tp->mmio_addr; - if (!netif_running(dev)) return; netif_device_detach(dev); netif_stop_queue(dev); - - spin_lock_irq(&tp->lock); - - rtl8169_asic_down(ioaddr); - - rtl8169_rx_missed(dev, ioaddr); - - spin_unlock_irq(&tp->lock); } #ifdef CONFIG_PM @@ -3876,9 +3865,17 @@ static struct dev_pm_ops rtl8169_pm_ops = { static void rtl_shutdown(struct pci_dev *pdev) { struct net_device *dev = pci_get_drvdata(pdev); + struct rtl8169_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; rtl8169_net_suspend(dev); + spin_lock_irq(&tp->lock); + + rtl8169_asic_down(ioaddr); + + spin_unlock_irq(&tp->lock); + if (system_state == SYSTEM_POWER_OFF) { pci_wake_from_d3(pdev, true); pci_set_power_state(pdev, PCI_D3hot); -- cgit v1.2.2 From d104acaf0540aee527d22eafd14b0a3d30be7f81 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 17 Jun 2009 07:30:32 +0000 Subject: sky2: turn off pause during shutdown This unblocks the chip if it is stuck in pause cycle during shutdown. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/sky2.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index c6ceba95ace7..5de2a9063b2b 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -1808,7 +1808,8 @@ static int sky2_down(struct net_device *dev) synchronize_irq(hw->pdev->irq); - sky2_gmac_reset(hw, port); + /* Force flow control off */ + sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF); /* Stop transmitter */ sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), BMU_STOP); -- cgit v1.2.2 From c0bad0f2e4366d5bbfe0c4a7a80bca8f4b05272b Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 17 Jun 2009 07:30:33 +0000 Subject: sky2: more receive shutdown Reset more parts of the receive path when device is take offline. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/sky2.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 5de2a9063b2b..e4e24ee00fb2 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -1151,7 +1151,14 @@ stopped: /* reset the Rx prefetch unit */ sky2_write32(hw, Y2_QADDR(rxq, PREF_UNIT_CTRL), PREF_UNIT_RST_SET); - mmiowb(); + + /* Reset the RAM Buffer receive queue */ + sky2_write8(hw, RB_ADDR(rxq, RB_CTRL), RB_RST_SET); + + /* Reset Rx MAC FIFO */ + sky2_write8(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), GMF_RST_SET); + + sky2_read8(hw, B0_CTST); } /* Clean out receive buffer area, assumes receiver hardware stopped */ -- cgit v1.2.2 From 1fd82f3cafa8e7854db08eccbdb8a9218225e1ef Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 17 Jun 2009 07:30:34 +0000 Subject: sky2: PCI irq issues Add some read's to avoid any PCI posting issues when controlling irq's. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/sky2.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index e4e24ee00fb2..cc1c8d13845f 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -1495,6 +1495,7 @@ static int sky2_up(struct net_device *dev) imask = sky2_read32(hw, B0_IMSK); imask |= portirq_msk[port]; sky2_write32(hw, B0_IMSK, imask); + sky2_read32(hw, B0_IMSK); sky2_set_multicast(dev); @@ -1812,6 +1813,7 @@ static int sky2_down(struct net_device *dev) imask = sky2_read32(hw, B0_IMSK); imask &= ~portirq_msk[port]; sky2_write32(hw, B0_IMSK, imask); + sky2_read32(hw, B0_IMSK); synchronize_irq(hw->pdev->irq); -- cgit v1.2.2 From 6c83504ff24f4a6bf28ad865e7c0619b17349e08 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 17 Jun 2009 07:30:35 +0000 Subject: sky2: fix shutdown synchronization The logic in sky2_down was incorrect. Receiver could report status after rx_stop was called. The steps need to be: * stop new frames from being transmitted * shut off transmit/receive logic * synchronize with NAPI to process status info about transmitter and receiver Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/sky2.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index cc1c8d13845f..fd7accf8f305 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -1815,8 +1815,6 @@ static int sky2_down(struct net_device *dev) sky2_write32(hw, B0_IMSK, imask); sky2_read32(hw, B0_IMSK); - synchronize_irq(hw->pdev->irq); - /* Force flow control off */ sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF); @@ -1831,9 +1829,6 @@ static int sky2_down(struct net_device *dev) ctrl &= ~(GM_GPCR_TX_ENA | GM_GPCR_RX_ENA); gma_write16(hw, port, GM_GP_CTRL, ctrl); - /* Make sure no packets are pending */ - napi_synchronize(&hw->napi); - sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET); /* Workaround shared GMAC reset */ @@ -1864,6 +1859,15 @@ static int sky2_down(struct net_device *dev) sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET); sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET); + /* Force any delayed status interrrupt and NAPI */ + sky2_write32(hw, STAT_LEV_TIMER_CNT, 0); + sky2_write32(hw, STAT_TX_TIMER_CNT, 0); + sky2_write32(hw, STAT_ISR_TIMER_CNT, 0); + sky2_read8(hw, STAT_ISR_TIMER_CTRL); + + synchronize_irq(hw->pdev->irq); + napi_synchronize(&hw->napi); + sky2_phy_power_down(hw, port); /* turn off LED's */ -- cgit v1.2.2 From bf15fe996e050332c018cf63dd51288b081cc556 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 17 Jun 2009 07:30:36 +0000 Subject: sky2: receive counter update Since it is likely that there are multiple packets received per interrupt, only update the receive counters once after all packets are processed. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/sky2.c | 29 +++++++++++++++++++---------- 1 file changed, 19 insertions(+), 10 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index fd7accf8f305..1b8de4518adc 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -2357,11 +2357,25 @@ static inline void sky2_tx_done(struct net_device *dev, u16 last) } } +static inline void sky2_rx_done(struct sky2_hw *hw, unsigned port, + unsigned packets, unsigned bytes) +{ + if (packets) { + struct net_device *dev = hw->dev[port]; + + dev->stats.rx_packets += packets; + dev->stats.rx_bytes += bytes; + dev->last_rx = jiffies; + sky2_rx_update(netdev_priv(dev), rxqaddr[port]); + } +} + /* Process status response ring */ static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx) { int work_done = 0; - unsigned rx[2] = { 0, 0 }; + unsigned int total_bytes[2] = { 0 }; + unsigned int total_packets[2] = { 0 }; rmb(); do { @@ -2388,7 +2402,8 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx) le->opcode = 0; switch (opcode & ~HW_OWNER) { case OP_RXSTAT: - ++rx[port]; + total_packets[port]++; + total_bytes[port] += length; skb = sky2_receive(dev, length, status); if (unlikely(!skb)) { dev->stats.rx_dropped++; @@ -2406,9 +2421,6 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx) } skb->protocol = eth_type_trans(skb, dev); - dev->stats.rx_packets++; - dev->stats.rx_bytes += skb->len; - dev->last_rx = jiffies; #ifdef SKY2_VLAN_TAG_USED if (sky2->vlgrp && (status & GMR_FS_VLAN)) { @@ -2487,11 +2499,8 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx) sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ); exit_loop: - if (rx[0]) - sky2_rx_update(netdev_priv(hw->dev[0]), Q_R1); - - if (rx[1]) - sky2_rx_update(netdev_priv(hw->dev[1]), Q_R2); + sky2_rx_done(hw, 0, total_packets[0], total_bytes[0]); + sky2_rx_done(hw, 1, total_packets[1], total_bytes[1]); return work_done; } -- cgit v1.2.2 From e9c1be80a7403fb817ec6229ec20a39e377cc4ce Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 17 Jun 2009 07:30:37 +0000 Subject: sky2: reduce default transmit ring Reduce the size of the driver transmit ring to reduce latency and allow qdisc to do better rate control. Also make it obvious what the minimum transmit ring allowed is and why. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/sky2.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 1b8de4518adc..6e95d2f54106 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -65,9 +65,9 @@ #define RX_DEF_PENDING RX_MAX_PENDING #define TX_RING_SIZE 512 -#define TX_DEF_PENDING (TX_RING_SIZE - 1) -#define TX_MIN_PENDING 64 +#define TX_DEF_PENDING 128 #define MAX_SKB_TX_LE (4 + (sizeof(dma_addr_t)/sizeof(u32))*MAX_SKB_FRAGS) +#define TX_MIN_PENDING (MAX_SKB_TX_LE+1) #define STATUS_RING_SIZE 2048 /* 2 ports * (TX + 2*RX) */ #define STATUS_LE_BYTES (STATUS_RING_SIZE*sizeof(struct sky2_status_le)) -- cgit v1.2.2 From bd1c6869f14f88aa82587ff51303e72dc7eec30e Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 17 Jun 2009 07:30:38 +0000 Subject: sky2: skb recycling This patch implements skb recycling. It reclaims transmitted skb's for use in the receive ring. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/sky2.c | 38 +++++++++++++++++++++++++++----------- drivers/net/sky2.h | 1 + 2 files changed, 28 insertions(+), 11 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 6e95d2f54106..4f2afc770f8f 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -1176,6 +1176,7 @@ static void sky2_rx_clean(struct sky2_port *sky2) re->skb = NULL; } } + skb_queue_purge(&sky2->rx_recycle); } /* Basic MII support */ @@ -1252,6 +1253,12 @@ static void sky2_vlan_rx_register(struct net_device *dev, struct vlan_group *grp } #endif +/* Amount of required worst case padding in rx buffer */ +static inline unsigned sky2_rx_pad(const struct sky2_hw *hw) +{ + return (hw->flags & SKY2_HW_RAM_BUFFER) ? 8 : 2; +} + /* * Allocate an skb for receiving. If the MTU is large enough * make the skb non-linear with a fragment list of pages. @@ -1261,6 +1268,13 @@ static struct sk_buff *sky2_rx_alloc(struct sky2_port *sky2) struct sk_buff *skb; int i; + skb = __skb_dequeue(&sky2->rx_recycle); + if (!skb) + skb = netdev_alloc_skb(sky2->netdev, sky2->rx_data_size + + sky2_rx_pad(sky2->hw)); + if (!skb) + goto nomem; + if (sky2->hw->flags & SKY2_HW_RAM_BUFFER) { unsigned char *start; /* @@ -1269,18 +1283,10 @@ static struct sk_buff *sky2_rx_alloc(struct sky2_port *sky2) * The buffer returned from netdev_alloc_skb is * aligned except if slab debugging is enabled. */ - skb = netdev_alloc_skb(sky2->netdev, sky2->rx_data_size + 8); - if (!skb) - goto nomem; start = PTR_ALIGN(skb->data, 8); skb_reserve(skb, start - skb->data); - } else { - skb = netdev_alloc_skb(sky2->netdev, - sky2->rx_data_size + NET_IP_ALIGN); - if (!skb) - goto nomem; + } else skb_reserve(skb, NET_IP_ALIGN); - } for (i = 0; i < sky2->rx_nfrags; i++) { struct page *page = alloc_page(GFP_ATOMIC); @@ -1357,6 +1363,8 @@ static int sky2_rx_start(struct sky2_port *sky2) sky2->rx_data_size = size; + skb_queue_head_init(&sky2->rx_recycle); + /* Fill Rx ring */ for (i = 0; i < sky2->rx_pending; i++) { re = sky2->rx_ring + i; @@ -1764,14 +1772,22 @@ static void sky2_tx_complete(struct sky2_port *sky2, u16 done) } if (le->ctrl & EOP) { + struct sk_buff *skb = re->skb; + if (unlikely(netif_msg_tx_done(sky2))) printk(KERN_DEBUG "%s: tx done %u\n", dev->name, idx); dev->stats.tx_packets++; - dev->stats.tx_bytes += re->skb->len; + dev->stats.tx_bytes += skb->len; + + if (skb_queue_len(&sky2->rx_recycle) < sky2->rx_pending + && skb_recycle_check(skb, sky2->rx_data_size + + sky2_rx_pad(sky2->hw))) + __skb_queue_head(&sky2->rx_recycle, skb); + else + dev_kfree_skb_any(skb); - dev_kfree_skb_any(re->skb); sky2->tx_next = RING_NEXT(idx, TX_RING_SIZE); } } diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index 92fb24b27d45..b5549c9e5107 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -2028,6 +2028,7 @@ struct sky2_port { u16 rx_pending; u16 rx_data_size; u16 rx_nfrags; + struct sk_buff_head rx_recycle; #ifdef SKY2_VLAN_TAG_USED u16 rx_tag; -- cgit v1.2.2 From 37e5a2439b43bb90655e17f00c9db5759909a712 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 17 Jun 2009 07:30:39 +0000 Subject: sky2: add GRO support Add support for generic receive offload. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/sky2.c | 29 +++++++++++++++++++++-------- 1 file changed, 21 insertions(+), 8 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 4f2afc770f8f..d2112e6258e6 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -2373,6 +2373,26 @@ static inline void sky2_tx_done(struct net_device *dev, u16 last) } } +static inline void sky2_skb_rx(const struct sky2_port *sky2, + u32 status, struct sk_buff *skb) +{ +#ifdef SKY2_VLAN_TAG_USED + u16 vlan_tag = be16_to_cpu(sky2->rx_tag); + if (sky2->vlgrp && (status & GMR_FS_VLAN)) { + if (skb->ip_summed == CHECKSUM_NONE) + vlan_hwaccel_receive_skb(skb, sky2->vlgrp, vlan_tag); + else + vlan_gro_receive(&sky2->hw->napi, sky2->vlgrp, + vlan_tag, skb); + return; + } +#endif + if (skb->ip_summed == CHECKSUM_NONE) + netif_receive_skb(skb); + else + napi_gro_receive(&sky2->hw->napi, skb); +} + static inline void sky2_rx_done(struct sky2_hw *hw, unsigned port, unsigned packets, unsigned bytes) { @@ -2438,14 +2458,7 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx) skb->protocol = eth_type_trans(skb, dev); -#ifdef SKY2_VLAN_TAG_USED - if (sky2->vlgrp && (status & GMR_FS_VLAN)) { - vlan_hwaccel_receive_skb(skb, - sky2->vlgrp, - be16_to_cpu(sky2->rx_tag)); - } else -#endif - netif_receive_skb(skb); + sky2_skb_rx(sky2, status, skb); /* Stop after net poll weight */ if (++work_done >= to_do) -- cgit v1.2.2 From e4f1482e686212e6d1dd6df93888bb26344981c6 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 17 Jun 2009 07:30:40 +0000 Subject: sky2: version 1.23 Version bump. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/sky2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index d2112e6258e6..7681d28c53d7 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -50,7 +50,7 @@ #include "sky2.h" #define DRV_NAME "sky2" -#define DRV_VERSION "1.22" +#define DRV_VERSION "1.23" #define PFX DRV_NAME " " /* -- cgit v1.2.2 From 31278e71471399beaff9280737e52b47db4dc345 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Wed, 17 Jun 2009 01:12:19 +0000 Subject: net: group address list and its count This patch is inspired by patch recently posted by Johannes Berg. Basically what my patch does is to group list and a count of addresses into newly introduced structure netdev_hw_addr_list. This brings us two benefits: 1) struct net_device becames a bit nicer. 2) in the future there will be a possibility to operate with lists independently on netdevices (with exporting right functions). I wanted to introduce this patch before I'll post a multicast lists conversion. Signed-off-by: Jiri Pirko drivers/net/bnx2.c | 4 +- drivers/net/e1000/e1000_main.c | 4 +- drivers/net/ixgbe/ixgbe_main.c | 6 +- drivers/net/mv643xx_eth.c | 2 +- drivers/net/niu.c | 4 +- drivers/net/virtio_net.c | 10 ++-- drivers/s390/net/qeth_l2_main.c | 2 +- include/linux/netdevice.h | 17 +++-- net/core/dev.c | 130 ++++++++++++++++++-------------------- 9 files changed, 89 insertions(+), 90 deletions(-) Signed-off-by: David S. Miller --- drivers/net/bnx2.c | 4 ++-- drivers/net/e1000/e1000_main.c | 4 ++-- drivers/net/ixgbe/ixgbe_main.c | 6 +++--- drivers/net/mv643xx_eth.c | 2 +- drivers/net/niu.c | 4 ++-- drivers/net/virtio_net.c | 10 +++++----- 6 files changed, 15 insertions(+), 15 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index 7e3738112c4e..38f1c3375d7f 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -3552,14 +3552,14 @@ bnx2_set_rx_mode(struct net_device *dev) sort_mode |= BNX2_RPM_SORT_USER0_MC_HSH_EN; } - if (dev->uc_count > BNX2_MAX_UNICAST_ADDRESSES) { + if (dev->uc.count > BNX2_MAX_UNICAST_ADDRESSES) { rx_mode |= BNX2_EMAC_RX_MODE_PROMISCUOUS; sort_mode |= BNX2_RPM_SORT_USER0_PROM_EN | BNX2_RPM_SORT_USER0_PROM_VLAN; } else if (!(dev->flags & IFF_PROMISC)) { /* Add all entries into to the match filter list */ i = 0; - list_for_each_entry(ha, &dev->uc_list, list) { + list_for_each_entry(ha, &dev->uc.list, list) { bnx2_set_mac_addr(bp, ha->addr, i + BNX2_START_UNICAST_ADDRESS_INDEX); sort_mode |= (1 << diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 8d36743c8140..5e3356f8eb5a 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -2370,7 +2370,7 @@ static void e1000_set_rx_mode(struct net_device *netdev) rctl |= E1000_RCTL_VFE; } - if (netdev->uc_count > rar_entries - 1) { + if (netdev->uc.count > rar_entries - 1) { rctl |= E1000_RCTL_UPE; } else if (!(netdev->flags & IFF_PROMISC)) { rctl &= ~E1000_RCTL_UPE; @@ -2394,7 +2394,7 @@ static void e1000_set_rx_mode(struct net_device *netdev) */ i = 1; if (use_uc) - list_for_each_entry(ha, &netdev->uc_list, list) { + list_for_each_entry(ha, &netdev->uc.list, list) { if (i == rar_entries) break; e1000_rar_set(hw, ha->addr, i++); diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index a551a96ce676..e756e220db32 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -2321,7 +2321,7 @@ static void ixgbe_set_rx_mode(struct net_device *netdev) IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl); /* reprogram secondary unicast list */ - hw->mac.ops.update_uc_addr_list(hw, &netdev->uc_list); + hw->mac.ops.update_uc_addr_list(hw, &netdev->uc.list); /* reprogram multicast list */ addr_count = netdev->mc_count; @@ -5261,7 +5261,7 @@ static int ixgbe_ioctl(struct net_device *netdev, struct ifreq *req, int cmd) /** * ixgbe_add_sanmac_netdev - Add the SAN MAC address to the corresponding - * netdev->dev_addr_list + * netdev->dev_addrs * @netdev: network interface device structure * * Returns non-zero on failure @@ -5282,7 +5282,7 @@ static int ixgbe_add_sanmac_netdev(struct net_device *dev) /** * ixgbe_del_sanmac_netdev - Removes the SAN MAC address to the corresponding - * netdev->dev_addr_list + * netdev->dev_addrs * @netdev: network interface device structure * * Returns non-zero on failure diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index b4e18a58cb1b..745ae8b4a2e8 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -1729,7 +1729,7 @@ static u32 uc_addr_filter_mask(struct net_device *dev) return 0; nibbles = 1 << (dev->dev_addr[5] & 0x0f); - list_for_each_entry(ha, &dev->uc_list, list) { + list_for_each_entry(ha, &dev->uc.list, list) { if (memcmp(dev->dev_addr, ha->addr, 5)) return 0; if ((dev->dev_addr[5] ^ ha->addr[5]) & 0xf0) diff --git a/drivers/net/niu.c b/drivers/net/niu.c index fa61a12c5e15..d2146d4a10f3 100644 --- a/drivers/net/niu.c +++ b/drivers/net/niu.c @@ -6376,7 +6376,7 @@ static void niu_set_rx_mode(struct net_device *dev) if ((dev->flags & IFF_ALLMULTI) || (dev->mc_count > 0)) np->flags |= NIU_FLAGS_MCAST; - alt_cnt = dev->uc_count; + alt_cnt = dev->uc.count; if (alt_cnt > niu_num_alt_addr(np)) { alt_cnt = 0; np->flags |= NIU_FLAGS_PROMISC; @@ -6385,7 +6385,7 @@ static void niu_set_rx_mode(struct net_device *dev) if (alt_cnt) { int index = 0; - list_for_each_entry(ha, &dev->uc_list, list) { + list_for_each_entry(ha, &dev->uc.list, list) { err = niu_set_alt_mac(np, index, ha->addr); if (err) printk(KERN_WARNING PFX "%s: Error %d " diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 52198f6797a4..2a6e81d5b579 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -709,7 +709,7 @@ static void virtnet_set_rx_mode(struct net_device *dev) allmulti ? "en" : "dis"); /* MAC filter - use one buffer for both lists */ - mac_data = buf = kzalloc(((dev->uc_count + dev->mc_count) * ETH_ALEN) + + mac_data = buf = kzalloc(((dev->uc.count + dev->mc_count) * ETH_ALEN) + (2 * sizeof(mac_data->entries)), GFP_ATOMIC); if (!buf) { dev_warn(&dev->dev, "No memory for MAC address buffer\n"); @@ -719,16 +719,16 @@ static void virtnet_set_rx_mode(struct net_device *dev) sg_init_table(sg, 2); /* Store the unicast list and count in the front of the buffer */ - mac_data->entries = dev->uc_count; + mac_data->entries = dev->uc.count; i = 0; - list_for_each_entry(ha, &dev->uc_list, list) + list_for_each_entry(ha, &dev->uc.list, list) memcpy(&mac_data->macs[i++][0], ha->addr, ETH_ALEN); sg_set_buf(&sg[0], mac_data, - sizeof(mac_data->entries) + (dev->uc_count * ETH_ALEN)); + sizeof(mac_data->entries) + (dev->uc.count * ETH_ALEN)); /* multicast list and count fill the end */ - mac_data = (void *)&mac_data->macs[dev->uc_count][0]; + mac_data = (void *)&mac_data->macs[dev->uc.count][0]; mac_data->entries = dev->mc_count; addr = dev->mc_list; -- cgit v1.2.2 From ab0a8e6c663047363e7436621b66c2ae575d2525 Mon Sep 17 00:00:00 2001 From: "chaithrika@ti.com" Date: Wed, 17 Jun 2009 01:28:54 +0000 Subject: TI DaVinci EMAC : Fix rmmod error clk_disable was called twice in the remove function. Correct this so that the driver module unloads without error. Signed-off-by: Chaithrika U S Signed-off-by: David S. Miller --- drivers/net/davinci_emac.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c index 0e9b9f9632c1..2df8fb0af701 100644 --- a/drivers/net/davinci_emac.c +++ b/drivers/net/davinci_emac.c @@ -2767,7 +2767,6 @@ static int __devexit davinci_emac_remove(struct platform_device *pdev) dev_notice(&ndev->dev, "DaVinci EMAC: davinci_emac_remove()\n"); - clk_disable(emac_clk); platform_set_drvdata(pdev, NULL); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); mdiobus_unregister(priv->mii_bus); -- cgit v1.2.2 From 6905b1f1a03a48dcf115a2927f7b87dba8d5e566 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sun, 14 Jun 2009 09:46:46 +0000 Subject: Net / e100: Fix suspend of devices that cannot be power managed If the adapter is not power-manageable using either ACPI, or the native PCI PM interface, __e100_power_off() returns error code, which causes every attempt to suspend to fail, although it should return 0 in such a case. Fix this problem by ignoring the return value of pci_set_power_state() in __e100_power_off(). Signed-off-by: Rafael J. Wysocki Acked-by: Andreas Mohr Signed-off-by: David S. Miller --- drivers/net/e100.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e100.c b/drivers/net/e100.c index f7929e89eb03..efa680f4b8dd 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -2895,12 +2895,13 @@ static void __e100_shutdown(struct pci_dev *pdev, bool *enable_wake) static int __e100_power_off(struct pci_dev *pdev, bool wake) { - if (wake) { + if (wake) return pci_prepare_to_sleep(pdev); - } else { - pci_wake_from_d3(pdev, false); - return pci_set_power_state(pdev, PCI_D3hot); - } + + pci_wake_from_d3(pdev, false); + pci_set_power_state(pdev, PCI_D3hot); + + return 0; } #ifdef CONFIG_PM -- cgit v1.2.2 From d3b238a03efd6d644ff93c8b10a1d38a596f2e34 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?S=C3=A9guier=20R=C3=A9gis?= Date: Tue, 16 Jun 2009 11:25:49 +0000 Subject: via-velocity : fix no link detection on boot on boot, link is always up. Signed-off-by: Seguier Regis Signed-off-by: David S. Miller --- drivers/net/via-velocity.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c index e2a7725e567e..b02f7adff5dc 100644 --- a/drivers/net/via-velocity.c +++ b/drivers/net/via-velocity.c @@ -989,8 +989,10 @@ static int __devinit velocity_found1(struct pci_dev *pdev, const struct pci_devi if (ret < 0) goto err_iounmap; - if (velocity_get_link(dev)) + if (!velocity_get_link(dev)) { netif_carrier_off(dev); + vptr->mii_status |= VELOCITY_LINK_FAIL; + } velocity_print_info(vptr); pci_set_drvdata(pdev, dev); -- cgit v1.2.2 From 73a370795371e41f72aeca61656d47adeadf28e5 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 17 Jun 2009 21:17:59 +0000 Subject: forcedeth: fix dma api mismatches forcedeth doesnt use properly dma api in its tx completion path and in nv_loopback_test() pci_map_single() should be paired with pci_unmap_single() pci_map_page() should be paired with pci_unmap_page() forcedeth xmit path uses pci_map_single() & pci_map_page(), but tx completion path only uses pci_unmap_single() nv_loopback_test() uses pci_map_single() & pci_unmap_page() Add a dma_single field in struct nv_skb_map, and define a helper function nv_unmap_txskb Signed-off-by: Eric Dumazet CC: Ayaz Abdulla Signed-off-by: David S. Miller --- drivers/net/forcedeth.c | 46 +++++++++++++++++++++++++++------------------- 1 file changed, 27 insertions(+), 19 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index b60a3041b64c..1094d292630f 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -719,7 +719,8 @@ static const struct register_test nv_registers_test[] = { struct nv_skb_map { struct sk_buff *skb; dma_addr_t dma; - unsigned int dma_len; + unsigned int dma_len:31; + unsigned int dma_single:1; struct ring_desc_ex *first_tx_desc; struct nv_skb_map *next_tx_ctx; }; @@ -1912,6 +1913,7 @@ static void nv_init_tx(struct net_device *dev) np->tx_skb[i].skb = NULL; np->tx_skb[i].dma = 0; np->tx_skb[i].dma_len = 0; + np->tx_skb[i].dma_single = 0; np->tx_skb[i].first_tx_desc = NULL; np->tx_skb[i].next_tx_ctx = NULL; } @@ -1930,23 +1932,30 @@ static int nv_init_ring(struct net_device *dev) return nv_alloc_rx_optimized(dev); } -static int nv_release_txskb(struct net_device *dev, struct nv_skb_map* tx_skb) +static void nv_unmap_txskb(struct fe_priv *np, struct nv_skb_map *tx_skb) { - struct fe_priv *np = netdev_priv(dev); - if (tx_skb->dma) { - pci_unmap_page(np->pci_dev, tx_skb->dma, - tx_skb->dma_len, - PCI_DMA_TODEVICE); + if (tx_skb->dma_single) + pci_unmap_single(np->pci_dev, tx_skb->dma, + tx_skb->dma_len, + PCI_DMA_TODEVICE); + else + pci_unmap_page(np->pci_dev, tx_skb->dma, + tx_skb->dma_len, + PCI_DMA_TODEVICE); tx_skb->dma = 0; } +} + +static int nv_release_txskb(struct fe_priv *np, struct nv_skb_map *tx_skb) +{ + nv_unmap_txskb(np, tx_skb); if (tx_skb->skb) { dev_kfree_skb_any(tx_skb->skb); tx_skb->skb = NULL; return 1; - } else { - return 0; } + return 0; } static void nv_drain_tx(struct net_device *dev) @@ -1964,10 +1973,11 @@ static void nv_drain_tx(struct net_device *dev) np->tx_ring.ex[i].bufhigh = 0; np->tx_ring.ex[i].buflow = 0; } - if (nv_release_txskb(dev, &np->tx_skb[i])) + if (nv_release_txskb(np, &np->tx_skb[i])) dev->stats.tx_dropped++; np->tx_skb[i].dma = 0; np->tx_skb[i].dma_len = 0; + np->tx_skb[i].dma_single = 0; np->tx_skb[i].first_tx_desc = NULL; np->tx_skb[i].next_tx_ctx = NULL; } @@ -2171,6 +2181,7 @@ static int nv_start_xmit(struct sk_buff *skb, struct net_device *dev) np->put_tx_ctx->dma = pci_map_single(np->pci_dev, skb->data + offset, bcnt, PCI_DMA_TODEVICE); np->put_tx_ctx->dma_len = bcnt; + np->put_tx_ctx->dma_single = 1; put_tx->buf = cpu_to_le32(np->put_tx_ctx->dma); put_tx->flaglen = cpu_to_le32((bcnt-1) | tx_flags); @@ -2196,6 +2207,7 @@ static int nv_start_xmit(struct sk_buff *skb, struct net_device *dev) np->put_tx_ctx->dma = pci_map_page(np->pci_dev, frag->page, frag->page_offset+offset, bcnt, PCI_DMA_TODEVICE); np->put_tx_ctx->dma_len = bcnt; + np->put_tx_ctx->dma_single = 0; put_tx->buf = cpu_to_le32(np->put_tx_ctx->dma); put_tx->flaglen = cpu_to_le32((bcnt-1) | tx_flags); @@ -2291,6 +2303,7 @@ static int nv_start_xmit_optimized(struct sk_buff *skb, struct net_device *dev) np->put_tx_ctx->dma = pci_map_single(np->pci_dev, skb->data + offset, bcnt, PCI_DMA_TODEVICE); np->put_tx_ctx->dma_len = bcnt; + np->put_tx_ctx->dma_single = 1; put_tx->bufhigh = cpu_to_le32(dma_high(np->put_tx_ctx->dma)); put_tx->buflow = cpu_to_le32(dma_low(np->put_tx_ctx->dma)); put_tx->flaglen = cpu_to_le32((bcnt-1) | tx_flags); @@ -2317,6 +2330,7 @@ static int nv_start_xmit_optimized(struct sk_buff *skb, struct net_device *dev) np->put_tx_ctx->dma = pci_map_page(np->pci_dev, frag->page, frag->page_offset+offset, bcnt, PCI_DMA_TODEVICE); np->put_tx_ctx->dma_len = bcnt; + np->put_tx_ctx->dma_single = 0; put_tx->bufhigh = cpu_to_le32(dma_high(np->put_tx_ctx->dma)); put_tx->buflow = cpu_to_le32(dma_low(np->put_tx_ctx->dma)); put_tx->flaglen = cpu_to_le32((bcnt-1) | tx_flags); @@ -2434,10 +2448,7 @@ static int nv_tx_done(struct net_device *dev, int limit) dprintk(KERN_DEBUG "%s: nv_tx_done: flags 0x%x.\n", dev->name, flags); - pci_unmap_page(np->pci_dev, np->get_tx_ctx->dma, - np->get_tx_ctx->dma_len, - PCI_DMA_TODEVICE); - np->get_tx_ctx->dma = 0; + nv_unmap_txskb(np, np->get_tx_ctx); if (np->desc_ver == DESC_VER_1) { if (flags & NV_TX_LASTPACKET) { @@ -2502,10 +2513,7 @@ static int nv_tx_done_optimized(struct net_device *dev, int limit) dprintk(KERN_DEBUG "%s: nv_tx_done_optimized: flags 0x%x.\n", dev->name, flags); - pci_unmap_page(np->pci_dev, np->get_tx_ctx->dma, - np->get_tx_ctx->dma_len, - PCI_DMA_TODEVICE); - np->get_tx_ctx->dma = 0; + nv_unmap_txskb(np, np->get_tx_ctx); if (flags & NV_TX2_LASTPACKET) { if (!(flags & NV_TX2_ERROR)) @@ -5091,7 +5099,7 @@ static int nv_loopback_test(struct net_device *dev) dprintk(KERN_DEBUG "%s: loopback - did not receive test packet\n", dev->name); } - pci_unmap_page(np->pci_dev, test_dma_addr, + pci_unmap_single(np->pci_dev, test_dma_addr, (skb_end_pointer(tx_skb) - tx_skb->data), PCI_DMA_TODEVICE); dev_kfree_skb_any(tx_skb); -- cgit v1.2.2 From d173346040af497af22818dfc48cff369e67cf50 Mon Sep 17 00:00:00 2001 From: Dhananjay Phadke Date: Wed, 17 Jun 2009 17:27:24 +0000 Subject: netxen: fix detection of cut-thru firmware mode Fix the detection of cut-thru mode of the hardware (direct dma to host) to mode configured in SRE (ingress block) rather than onboard memory control. Signed-off-by: Dhananjay Phadke Signed-off-by: David S. Miller --- drivers/net/netxen/netxen_nic_hdr.h | 1 + drivers/net/netxen/netxen_nic_hw.c | 4 ++-- 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/netxen/netxen_nic_hdr.h b/drivers/net/netxen/netxen_nic_hdr.h index 7f0ddbfa7b28..3cc047844af3 100644 --- a/drivers/net/netxen/netxen_nic_hdr.h +++ b/drivers/net/netxen/netxen_nic_hdr.h @@ -355,6 +355,7 @@ enum { #define NETXEN_HW_CRB_HUB_AGT_ADR_LPC \ ((NETXEN_HW_H6_CH_HUB_ADR << 7) | NETXEN_HW_LPC_CRB_AGT_ADR) +#define NETXEN_SRE_MISC (NETXEN_CRB_SRE + 0x0002c) #define NETXEN_SRE_INT_STATUS (NETXEN_CRB_SRE + 0x00034) #define NETXEN_SRE_PBI_ACTIVE_STATUS (NETXEN_CRB_SRE + 0x01014) #define NETXEN_SRE_L1RE_CTL (NETXEN_CRB_SRE + 0x03000) diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c index 42ffb825ebf1..9702509ce3c5 100644 --- a/drivers/net/netxen/netxen_nic_hw.c +++ b/drivers/net/netxen/netxen_nic_hw.c @@ -2041,8 +2041,8 @@ void netxen_nic_get_firmware_info(struct netxen_adapter *adapter) fw_major, fw_minor, fw_build); if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) { - i = NXRD32(adapter, NETXEN_MIU_MN_CONTROL); - adapter->ahw.cut_through = (i & 0x4) ? 1 : 0; + i = NXRD32(adapter, NETXEN_SRE_MISC); + adapter->ahw.cut_through = (i & 0x8000) ? 1 : 0; dev_info(&pdev->dev, "firmware running in %s mode\n", adapter->ahw.cut_through ? "cut-through" : "legacy"); } -- cgit v1.2.2 From cb2107be43d2fc5eadec58b92b54bf32c00bfff3 Mon Sep 17 00:00:00 2001 From: Dhananjay Phadke Date: Wed, 17 Jun 2009 17:27:25 +0000 Subject: netxen: fix tx ring accounting This forces every update of tx ring producer to check for availability of space for next full TSO command. Earlier firmware control commands didn't care to pause tx queue. Stop the tx queue if there's not enough space to transmit one full LSO command left on the tx ring after current transmit. This avoids returning NETDEV_TX_BUSY after checking distance between producer and consumer on every cpu. Restart the tx queue only if we have cleaned up enough tx descriptors. Signed-off-by: Dhananjay Phadke Signed-off-by: David S. Miller --- drivers/net/netxen/netxen_nic.h | 11 ++++++++++- drivers/net/netxen/netxen_nic_hw.c | 2 +- drivers/net/netxen/netxen_nic_init.c | 11 +++++------ drivers/net/netxen/netxen_nic_main.c | 32 +++++++++++++++++++------------- 4 files changed, 35 insertions(+), 21 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h index ab11c2b3f0fe..970cedeb5f37 100644 --- a/drivers/net/netxen/netxen_nic.h +++ b/drivers/net/netxen/netxen_nic.h @@ -169,6 +169,7 @@ #define MAX_NUM_CARDS 4 #define MAX_BUFFERS_PER_CMD 32 +#define TX_STOP_THRESH ((MAX_SKB_FRAGS >> 2) + 4) /* * Following are the states of the Phantom. Phantom will set them and @@ -1436,7 +1437,7 @@ int netxen_nic_set_mac(struct net_device *netdev, void *p); struct net_device_stats *netxen_nic_get_stats(struct net_device *netdev); void netxen_nic_update_cmd_producer(struct netxen_adapter *adapter, - struct nx_host_tx_ring *tx_ring, uint32_t crb_producer); + struct nx_host_tx_ring *tx_ring); /* * NetXen Board information @@ -1538,6 +1539,14 @@ dma_watchdog_wakeup(struct netxen_adapter *adapter) } +static inline u32 netxen_tx_avail(struct nx_host_tx_ring *tx_ring) +{ + smp_mb(); + return find_diff_among(tx_ring->producer, + tx_ring->sw_consumer, tx_ring->num_desc); + +} + int netxen_get_flash_mac_addr(struct netxen_adapter *adapter, __le64 *mac); int netxen_p3_get_mac_addr(struct netxen_adapter *adapter, __le64 *mac); extern void netxen_change_ringparam(struct netxen_adapter *adapter); diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c index 9702509ce3c5..ce3b89d2cbb6 100644 --- a/drivers/net/netxen/netxen_nic_hw.c +++ b/drivers/net/netxen/netxen_nic_hw.c @@ -488,7 +488,7 @@ netxen_send_cmd_descs(struct netxen_adapter *adapter, tx_ring->producer = producer; - netxen_nic_update_cmd_producer(adapter, tx_ring, producer); + netxen_nic_update_cmd_producer(adapter, tx_ring); netif_tx_unlock_bh(adapter->netdev); diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c index 6f77ad58e3b3..bdb143d2b5c7 100644 --- a/drivers/net/netxen/netxen_nic_init.c +++ b/drivers/net/netxen/netxen_nic_init.c @@ -1292,7 +1292,6 @@ int netxen_process_cmd_ring(struct netxen_adapter *adapter) return 1; sw_consumer = tx_ring->sw_consumer; - barrier(); /* hw_consumer can change underneath */ hw_consumer = le32_to_cpu(*(tx_ring->hw_consumer)); while (sw_consumer != hw_consumer) { @@ -1319,14 +1318,15 @@ int netxen_process_cmd_ring(struct netxen_adapter *adapter) break; } - tx_ring->sw_consumer = sw_consumer; - if (count && netif_running(netdev)) { + tx_ring->sw_consumer = sw_consumer; + smp_mb(); + if (netif_queue_stopped(netdev) && netif_carrier_ok(netdev)) { netif_tx_lock(netdev); - netif_wake_queue(netdev); - smp_mb(); + if (netxen_tx_avail(tx_ring) > TX_STOP_THRESH) + netif_wake_queue(netdev); netif_tx_unlock(netdev); } } @@ -1343,7 +1343,6 @@ int netxen_process_cmd_ring(struct netxen_adapter *adapter) * There is still a possible race condition and the host could miss an * interrupt. The card has to take care of this. */ - barrier(); /* hw_consumer can change underneath */ hw_consumer = le32_to_cpu(*(tx_ring->hw_consumer)); done = (sw_consumer == hw_consumer); spin_unlock(&adapter->tx_clean_lock); diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index 98737ef72936..71daa3d5f114 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -107,9 +107,14 @@ static uint32_t crb_cmd_producer[4] = { void netxen_nic_update_cmd_producer(struct netxen_adapter *adapter, - struct nx_host_tx_ring *tx_ring, u32 producer) + struct nx_host_tx_ring *tx_ring) { - NXWR32(adapter, tx_ring->crb_cmd_producer, producer); + NXWR32(adapter, tx_ring->crb_cmd_producer, tx_ring->producer); + + if (netxen_tx_avail(tx_ring) <= TX_STOP_THRESH) { + netif_stop_queue(adapter->netdev); + smp_mb(); + } } static uint32_t crb_cmd_consumer[4] = { @@ -119,9 +124,9 @@ static uint32_t crb_cmd_consumer[4] = { static inline void netxen_nic_update_cmd_consumer(struct netxen_adapter *adapter, - struct nx_host_tx_ring *tx_ring, u32 consumer) + struct nx_host_tx_ring *tx_ring) { - NXWR32(adapter, tx_ring->crb_cmd_consumer, consumer); + NXWR32(adapter, tx_ring->crb_cmd_consumer, tx_ring->sw_consumer); } static uint32_t msi_tgt_status[8] = { @@ -900,8 +905,11 @@ netxen_nic_attach(struct netxen_adapter *adapter) tx_ring->crb_cmd_producer = crb_cmd_producer[adapter->portnum]; tx_ring->crb_cmd_consumer = crb_cmd_consumer[adapter->portnum]; - netxen_nic_update_cmd_producer(adapter, tx_ring, 0); - netxen_nic_update_cmd_consumer(adapter, tx_ring, 0); + tx_ring->producer = 0; + tx_ring->sw_consumer = 0; + + netxen_nic_update_cmd_producer(adapter, tx_ring); + netxen_nic_update_cmd_consumer(adapter, tx_ring); } for (ring = 0; ring < adapter->max_rds_rings; ring++) { @@ -1362,7 +1370,7 @@ netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev) dma_addr_t temp_dma; int i, k; - u32 producer, consumer; + u32 producer; int frag_count, no_of_desc; u32 num_txd = tx_ring->num_desc; bool is_tso = false; @@ -1372,15 +1380,13 @@ netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev) /* 4 fragments per cmd des */ no_of_desc = (frag_count + 3) >> 2; - producer = tx_ring->producer; - smp_mb(); - consumer = tx_ring->sw_consumer; - if ((no_of_desc+2) >= find_diff_among(producer, consumer, num_txd)) { + if (unlikely(no_of_desc + 2) > netxen_tx_avail(tx_ring)) { netif_stop_queue(netdev); - smp_mb(); return NETDEV_TX_BUSY; } + producer = tx_ring->producer; + hwdesc = &tx_ring->desc_head[producer]; netxen_clear_cmddesc((u64 *)hwdesc); pbuf = &tx_ring->cmd_buf_arr[producer]; @@ -1493,7 +1499,7 @@ netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev) tx_ring->producer = producer; adapter->stats.txbytes += skb->len; - netxen_nic_update_cmd_producer(adapter, tx_ring, producer); + netxen_nic_update_cmd_producer(adapter, tx_ring); adapter->stats.xmitcalled++; -- cgit v1.2.2