From 70d9d15833864e7120c3ffcfdbd6fa61f5f9726a Mon Sep 17 00:00:00 2001 From: Will Newton Date: Tue, 28 Oct 2008 10:52:36 +0000 Subject: drivers/net/smc911x.c: Fix lockdep warning on xmit. dev_kfree_skb should not be called with irqs disabled, use dev_kfree_skb_irq instead. The warning caused looks like this: ====================================================== [ INFO: hard-safe -> hard-unsafe lock order detected ] 2.6.28-rc1 #273 ------------------------------------------------------ swapper/0 [HC0[0]:SC1[2]:HE0:SE0] is trying to acquire: (clock-AF_INET){-..+}, at: [<4015c17c>] _sock_def_write_space+0x28/0xd8 and this task is already holding: (&lp->lock){++..}, at: [<4013f230>] _smc911x_hard_start_xmit+0x30/0x4b8 which would create a new lock dependency: (&lp->lock){++..} -> (clock-AF_INET){-..+} Signed-off-by: Will Newton Signed-off-by: Jeff Garzik --- drivers/net/smc911x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c index f59c7772f344..5051554ff05b 100644 --- a/drivers/net/smc911x.c +++ b/drivers/net/smc911x.c @@ -499,7 +499,7 @@ static void smc911x_hardware_send_pkt(struct net_device *dev) #else SMC_PUSH_DATA(lp, buf, len); dev->trans_start = jiffies; - dev_kfree_skb(skb); + dev_kfree_skb_irq(skb); #endif if (!lp->tx_throttle) { netif_wake_queue(dev); -- cgit v1.2.2 From 55c8eb6c8eaa5009eed1557b296da5d4ea9c369a Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 3 Nov 2008 00:04:24 -0800 Subject: SMC91x: Fix compilation on some platforms. This reverts 51ac3beffd4afaea4350526cf01fe74aaff25eff ('SMC91x: delete unused local variable "lp"') and adds __maybe_unused markers to these (potentially) unused variables. The issue is that in some configurations SMC_IO_SHIFT evaluates to '(lp->io_shift)', but in some others it's plain '0'. Based upon a build failure report from Manuel Lauss. Signed-off-by: David S. Miller --- drivers/net/smc91x.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c index 6f9895d4e5bd..fc80f250da31 100644 --- a/drivers/net/smc91x.c +++ b/drivers/net/smc91x.c @@ -2060,6 +2060,7 @@ static int smc_request_attrib(struct platform_device *pdev, struct net_device *ndev) { struct resource * res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-attrib"); + struct smc_local *lp __maybe_unused = netdev_priv(ndev); if (!res) return 0; @@ -2074,6 +2075,7 @@ static void smc_release_attrib(struct platform_device *pdev, struct net_device *ndev) { struct resource * res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-attrib"); + struct smc_local *lp __maybe_unused = netdev_priv(ndev); if (res) release_mem_region(res->start, ATTRIB_SIZE); -- cgit v1.2.2 From 7385d595751874854a6729fbaaa7f793480bbb67 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Sun, 2 Nov 2008 17:49:59 +0300 Subject: fs_enet: fix polling 1. compile fix for irqreturn_t type change 2. restore ->poll_controller after CONFIG_PPC_CPM_NEW_BINDING transition Signed-off-by: Alexey Dobriyan Signed-off-by: Jeff Garzik --- drivers/net/fs_enet/fs_enet-main.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c index cb51c1fb0338..a6f49d025787 100644 --- a/drivers/net/fs_enet/fs_enet-main.c +++ b/drivers/net/fs_enet/fs_enet-main.c @@ -1099,7 +1099,9 @@ static int __devinit fs_enet_probe(struct of_device *ofdev, ndev->stop = fs_enet_close; ndev->get_stats = fs_enet_get_stats; ndev->set_multicast_list = fs_set_multicast_list; - +#ifdef CONFIG_NET_POLL_CONTROLLER + ndev->poll_controller = fs_enet_netpoll; +#endif if (fpi->use_napi) netif_napi_add(ndev, &fep->napi, fs_enet_rx_napi, fpi->napi_weight); @@ -1209,7 +1211,7 @@ static void __exit fs_cleanup(void) static void fs_enet_netpoll(struct net_device *dev) { disable_irq(dev->irq); - fs_enet_interrupt(dev->irq, dev, NULL); + fs_enet_interrupt(dev->irq, dev); enable_irq(dev->irq); } #endif -- cgit v1.2.2 From 1d19ecfc65ed01bac7a58f83004057ad704ee7cc Mon Sep 17 00:00:00 2001 From: Jeff Kirsher Date: Sun, 2 Nov 2008 20:30:33 -0800 Subject: net: kconfig cleanup The bool kconfig option added to ixgbe and myri10ge for DCA is ambigous, so this patch adds a description to the kconfig option. Signed-off-by: Jeff Kirsher Signed-off-by: Jeff Garzik --- drivers/net/Kconfig | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index f749b40f954e..11f143f4adf6 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2010,9 +2010,13 @@ config IGB_LRO If in doubt, say N. config IGB_DCA - bool "Enable DCA" + bool "Direct Cache Access (DCA) Support" default y depends on IGB && DCA && !(IGB=y && DCA=m) + ---help--- + Say Y here if you want to use Direct Cache Access (DCA) in the + driver. DCA is a method for warming the CPU cache before data + is used, with the intent of lessening the impact of cache misses. source "drivers/net/ixp2000/Kconfig" @@ -2437,9 +2441,13 @@ config IXGBE will be called ixgbe. config IXGBE_DCA - bool + bool "Direct Cache Access (DCA) Support" default y depends on IXGBE && DCA && !(IXGBE=y && DCA=m) + ---help--- + Say Y here if you want to use Direct Cache Access (DCA) in the + driver. DCA is a method for warming the CPU cache before data + is used, with the intent of lessening the impact of cache misses. config IXGB tristate "Intel(R) PRO/10GbE support" @@ -2489,9 +2497,13 @@ config MYRI10GE will be called myri10ge. config MYRI10GE_DCA - bool + bool "Direct Cache Access (DCA) Support" default y depends on MYRI10GE && DCA && !(MYRI10GE=y && DCA=m) + ---help--- + Say Y here if you want to use Direct Cache Access (DCA) in the + driver. DCA is a method for warming the CPU cache before data + is used, with the intent of lessening the impact of cache misses. config NETXEN_NIC tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC" -- cgit v1.2.2 From ee04448d8871e71f55520d62cf6adbf5dd403c99 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Sat, 1 Nov 2008 06:32:20 +0100 Subject: mv643xx_eth: fix SMI bus access timeouts The mv643xx_eth mii bus implementation uses wait_event_timeout() to wait for SMI completion interrupts. If wait_event_timeout() would return zero, mv643xx_eth would conclude that the SMI access timed out, but this is not necessarily true -- wait_event_timeout() can also return zero in the case where the SMI completion interrupt did happen in time but where it took longer than the requested timeout for the process performing the SMI access to be scheduled again. This would lead to occasional SMI access timeouts when the system would be under heavy load. The fix is to ignore the return value of wait_event_timeout(), and to re-check the SMI done bit after wait_event_timeout() returns to determine whether or not the SMI access timed out. Signed-off-by: Lennert Buytenhek Signed-off-by: Jeff Garzik --- drivers/net/mv643xx_eth.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index a9c8c08044b1..b9dcdbd369f8 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -1066,9 +1066,12 @@ static int smi_wait_ready(struct mv643xx_eth_shared_private *msp) return 0; } - if (!wait_event_timeout(msp->smi_busy_wait, smi_is_done(msp), - msecs_to_jiffies(100))) - return -ETIMEDOUT; + if (!smi_is_done(msp)) { + wait_event_timeout(msp->smi_busy_wait, smi_is_done(msp), + msecs_to_jiffies(100)); + if (!smi_is_done(msp)) + return -ETIMEDOUT; + } return 0; } -- cgit v1.2.2 From 9a0354405feb0f8bd460349a93db05e4cca8d166 Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Mon, 3 Nov 2008 16:45:55 -0800 Subject: bnx2x: Removing the PMF indication when unloading When the PMF flag is set, the driver can access the HW freely. When the driver is unloaded, it should not access the HW. The problem caused fatal errors when "ethtool -i" was called after the calling instance was unloaded and another instance was already loaded Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x_main.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index fce745148ff9..61152e149e67 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -6481,6 +6481,7 @@ load_int_disable: bnx2x_free_irq(bp); load_error: bnx2x_free_mem(bp); + bp->port.pmf = 0; /* TBD we really need to reset the chip if we want to recover from this */ @@ -6791,6 +6792,7 @@ unload_error: /* Report UNLOAD_DONE to MCP */ if (!BP_NOMCP(bp)) bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE); + bp->port.pmf = 0; /* Free SKBs, SGEs, TPA pool and driver internals */ bnx2x_free_skbs(bp); -- cgit v1.2.2 From 7d96567ac0527703cf1b80043fc0ebd7f21a10ad Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Mon, 3 Nov 2008 16:46:19 -0800 Subject: bnx2x: PCI configuration bug on big-endian The current code read nothing but zeros on big-endian (wrong part of the 32bits). This caused poor performance on big-endian machines. Though this issue did not cause the system to crash, the performance is significantly better with the fix so I view it as critical bug fix. Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x_init.h | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/bnx2x_init.h b/drivers/net/bnx2x_init.h index 130927cfc75b..a6c0b3abba29 100644 --- a/drivers/net/bnx2x_init.h +++ b/drivers/net/bnx2x_init.h @@ -564,14 +564,15 @@ static const struct arb_line write_arb_addr[NUM_WR_Q-1] = { static void bnx2x_init_pxp(struct bnx2x *bp) { + u16 devctl; int r_order, w_order; u32 val, i; pci_read_config_word(bp->pdev, - bp->pcie_cap + PCI_EXP_DEVCTL, (u16 *)&val); - DP(NETIF_MSG_HW, "read 0x%x from devctl\n", (u16)val); - w_order = ((val & PCI_EXP_DEVCTL_PAYLOAD) >> 5); - r_order = ((val & PCI_EXP_DEVCTL_READRQ) >> 12); + bp->pcie_cap + PCI_EXP_DEVCTL, &devctl); + DP(NETIF_MSG_HW, "read 0x%x from devctl\n", devctl); + w_order = ((devctl & PCI_EXP_DEVCTL_PAYLOAD) >> 5); + r_order = ((devctl & PCI_EXP_DEVCTL_READRQ) >> 12); if (r_order > MAX_RD_ORD) { DP(NETIF_MSG_HW, "read order of %d order adjusted to %d\n", -- cgit v1.2.2 From 12b56ea89e70d4b04f2f5199750310e82894ebbd Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Mon, 3 Nov 2008 16:46:40 -0800 Subject: bnx2x: Calling netif_carrier_off at the end of the probe netif_carrier_off was called too early at the probe. In case of failure or simply bad timing, this can cause a fatal error since linkwatch_event might run too soon. Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index 61152e149e67..5b013d8457c5 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -10206,8 +10206,6 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev, return -ENOMEM; } - netif_carrier_off(dev); - bp = netdev_priv(dev); bp->msglevel = debug; @@ -10231,6 +10229,8 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev, goto init_one_exit; } + netif_carrier_off(dev); + bp->common.name = board_info[ent->driver_data].name; printk(KERN_INFO "%s: %s (%c%d) PCI-E x%d %s found at mem %lx," " IRQ %d, ", dev->name, bp->common.name, -- cgit v1.2.2 From ca8eac55fa554043c57fd18d595ca356e752833e Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Mon, 3 Nov 2008 16:46:58 -0800 Subject: bnx2x: Version Update Updating the version Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index 5b013d8457c5..600210d7eff9 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -59,8 +59,8 @@ #include "bnx2x.h" #include "bnx2x_init.h" -#define DRV_MODULE_VERSION "1.45.22" -#define DRV_MODULE_RELDATE "2008/09/09" +#define DRV_MODULE_VERSION "1.45.23" +#define DRV_MODULE_RELDATE "2008/11/03" #define BNX2X_BC_VER 0x040200 /* Time in jiffies before concluding the transmitter is hung */ -- cgit v1.2.2 From 19ecb6ba800765743bb4525c66562f0d30993f8d Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 3 Nov 2008 17:05:16 -0800 Subject: niu: Use pci_ioremap_bar(). Signed-off-by: David S. Miller --- drivers/net/niu.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/niu.c b/drivers/net/niu.c index ebc812702903..9acb5d70a3ae 100644 --- a/drivers/net/niu.c +++ b/drivers/net/niu.c @@ -8667,7 +8667,6 @@ static void __devinit niu_device_announce(struct niu *np) static int __devinit niu_pci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { - unsigned long niureg_base, niureg_len; union niu_parent_id parent_id; struct net_device *dev; struct niu *np; @@ -8758,10 +8757,7 @@ static int __devinit niu_pci_init_one(struct pci_dev *pdev, dev->features |= (NETIF_F_SG | NETIF_F_HW_CSUM); - niureg_base = pci_resource_start(pdev, 0); - niureg_len = pci_resource_len(pdev, 0); - - np->regs = ioremap_nocache(niureg_base, niureg_len); + np->regs = pci_ioremap_bar(pdev, 0); if (!np->regs) { dev_err(&pdev->dev, PFX "Cannot map device registers, " "aborting.\n"); -- cgit v1.2.2 From 54074d59320581a6d7e4f4dd405e8cac1d174b75 Mon Sep 17 00:00:00 2001 From: Jianjun Kong Date: Tue, 4 Nov 2008 21:47:07 +0800 Subject: drivers: remove duplicated #include Signed-off-by: Jianjun Kong Signed-off-by: Linus Torvalds --- drivers/net/atl1e/atl1e.h | 1 - drivers/net/ucc_geth_ethtool.c | 1 - 2 files changed, 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/atl1e/atl1e.h b/drivers/net/atl1e/atl1e.h index b645fa0f3f64..c49550d507a0 100644 --- a/drivers/net/atl1e/atl1e.h +++ b/drivers/net/atl1e/atl1e.h @@ -46,7 +46,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ucc_geth_ethtool.c index cfbbfee55836..85f38a6b6a49 100644 --- a/drivers/net/ucc_geth_ethtool.c +++ b/drivers/net/ucc_geth_ethtool.c @@ -37,7 +37,6 @@ #include #include #include -#include #include "ucc_geth.h" #include "ucc_geth_mii.h" -- cgit v1.2.2 From 7b0f5df4c88bac46fe749d36d905fc7ad0296587 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 4 Nov 2008 11:18:56 -0800 Subject: mlx4_core: Fix unused variable warning Fix drivers/net/mlx4/profile.c:55: warning: 'res_name' defined but not used by making mlx4_dbg() always use all of its parameters, regardless of whether CONFIG_MLX4_DEBUG is set or not. Reported-by: Alexander Beregalov Signed-off-by: Roland Dreier --- drivers/net/mlx4/mlx4.h | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/mlx4/mlx4.h b/drivers/net/mlx4/mlx4.h index fa431fad0eec..56a2e213fe62 100644 --- a/drivers/net/mlx4/mlx4.h +++ b/drivers/net/mlx4/mlx4.h @@ -87,6 +87,9 @@ enum { #ifdef CONFIG_MLX4_DEBUG extern int mlx4_debug_level; +#else /* CONFIG_MLX4_DEBUG */ +#define mlx4_debug_level (0) +#endif /* CONFIG_MLX4_DEBUG */ #define mlx4_dbg(mdev, format, arg...) \ do { \ @@ -94,12 +97,6 @@ extern int mlx4_debug_level; dev_printk(KERN_DEBUG, &mdev->pdev->dev, format, ## arg); \ } while (0) -#else /* CONFIG_MLX4_DEBUG */ - -#define mlx4_dbg(mdev, format, arg...) do { (void) mdev; } while (0) - -#endif /* CONFIG_MLX4_DEBUG */ - #define mlx4_err(mdev, format, arg...) \ dev_err(&mdev->pdev->dev, format, ## arg) #define mlx4_info(mdev, format, arg...) \ -- cgit v1.2.2 From 934f6c3f8e7f5d6a6d07ae2df283fd02393019dd Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Thu, 6 Nov 2008 15:49:04 -0500 Subject: Revert "ath5k: honor FIF_BCN_PRBRESP_PROMISC in STA mode" Unfortunately, the result was that mac80211 didn't see all the beacons it actually wanted to see. This caused lost associations. Hopefully we can revisit this when mac80211 is less greedy about seeing beacons directly... This reverts commit 063279062a8c530cc90fb77797db16c49c905b26. Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/base.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index 9e47d727e220..cfd4d052d666 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -2942,8 +2942,10 @@ static void ath5k_configure_filter(struct ieee80211_hw *hw, sc->opmode != NL80211_IFTYPE_MESH_POINT && test_bit(ATH_STAT_PROMISC, sc->status)) rfilt |= AR5K_RX_FILTER_PROM; - if (sc->opmode == NL80211_IFTYPE_ADHOC) + if (sc->opmode == NL80211_IFTYPE_STATION || + sc->opmode == NL80211_IFTYPE_ADHOC) { rfilt |= AR5K_RX_FILTER_BEACON; + } /* Set filters */ ath5k_hw_set_rx_filter(ah,rfilt); -- cgit v1.2.2 From 502c12e1ef14967e08dabb04c674cf0f000e8f7e Mon Sep 17 00:00:00 2001 From: Mohamed Abbas Date: Thu, 23 Oct 2008 23:48:54 -0700 Subject: iwlwifi: clear scanning bits upon failure In iwl_bg_request_scan function, if we could not send a scan command it will go to done. In done it does the right thing to call mac80211 with scan complete, but the problem is STATUS_SCAN_HW is still set causing any future scan to fail. Fix by clearing the scanning status bits if scan fails. Signed-off-by: Mohamed Abbas Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-scan.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c index 3b0bee331a33..c89365e2ca58 100644 --- a/drivers/net/wireless/iwlwifi/iwl-scan.c +++ b/drivers/net/wireless/iwlwifi/iwl-scan.c @@ -896,6 +896,13 @@ static void iwl_bg_request_scan(struct work_struct *data) return; done: + /* Cannot perform scan. Make sure we clear scanning + * bits from status so next scan request can be performed. + * If we don't clear scanning status bit here all next scan + * will fail + */ + clear_bit(STATUS_SCAN_HW, &priv->status); + clear_bit(STATUS_SCANNING, &priv->status); /* inform mac80211 scan aborted */ queue_work(priv->workqueue, &priv->scan_completed); mutex_unlock(&priv->mutex); -- cgit v1.2.2 From 964d2777438bf7687324243d38ade538d9bbfe3c Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Thu, 30 Oct 2008 14:12:21 -0400 Subject: iwlagn: avoid sleep in softirq context __ieee80211_tasklet_handler -> __ieee80211_rx -> __ieee80211_rx_handle_packet -> ieee80211_invoke_rx_handlers -> ieee80211_rx_h_decrypt -> ieee80211_crypto_tkip_decrypt -> ieee80211_tkip_decrypt_data -> iwl4965_mac_update_tkip_key -> iwl_scan_cancel_timeout -> msleep Ooops! Avoid the sleep by changing iwl_scan_cancel_timeout with iwl_scan_cancel and simply returning on failure if the scan persists. This will cause hardware decryption to fail and we'll handle a few more frames with software decryption. Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 321dbc8c034a..8d690a0eb1a9 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -3252,7 +3252,11 @@ static void iwl4965_mac_update_tkip_key(struct ieee80211_hw *hw, return; } - iwl_scan_cancel_timeout(priv, 100); + if (iwl_scan_cancel(priv)) { + /* cancel scan failed, just live w/ bad key and rely + briefly on SW decryption */ + return; + } key_flags |= (STA_KEY_FLG_TKIP | STA_KEY_FLG_MAP_KEY_MSK); key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS); -- cgit v1.2.2 From 0feec9dfe7b8880ab3b4c38d7cc4107dd706ea7f Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Sat, 1 Nov 2008 17:03:48 +0000 Subject: zd1211rw: Add 2 device IDs 07fa/1196 Bewan BWIFI-USB54AR: Tested by night1308, this device is a ZD1211B with an AL2230S radio. 0ace/b215 HP 802.11abg: Tested by Robert Philippe Signed-off-by: John W. Linville --- drivers/net/wireless/zd1211rw/zd_usb.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c index a60ae86bd5c9..a3ccd8c1c716 100644 --- a/drivers/net/wireless/zd1211rw/zd_usb.c +++ b/drivers/net/wireless/zd1211rw/zd_usb.c @@ -61,6 +61,7 @@ static struct usb_device_id usb_ids[] = { { USB_DEVICE(0x0105, 0x145f), .driver_info = DEVICE_ZD1211 }, /* ZD1211B */ { USB_DEVICE(0x0ace, 0x1215), .driver_info = DEVICE_ZD1211B }, + { USB_DEVICE(0x0ace, 0xb215), .driver_info = DEVICE_ZD1211B }, { USB_DEVICE(0x157e, 0x300d), .driver_info = DEVICE_ZD1211B }, { USB_DEVICE(0x079b, 0x0062), .driver_info = DEVICE_ZD1211B }, { USB_DEVICE(0x1582, 0x6003), .driver_info = DEVICE_ZD1211B }, @@ -82,6 +83,7 @@ static struct usb_device_id usb_ids[] = { { USB_DEVICE(0x0cde, 0x001a), .driver_info = DEVICE_ZD1211B }, { USB_DEVICE(0x0586, 0x340a), .driver_info = DEVICE_ZD1211B }, { USB_DEVICE(0x0471, 0x1237), .driver_info = DEVICE_ZD1211B }, + { USB_DEVICE(0x07fa, 0x1196), .driver_info = DEVICE_ZD1211B }, /* "Driverless" devices that need ejecting */ { USB_DEVICE(0x0ace, 0x2011), .driver_info = DEVICE_INSTALLER }, { USB_DEVICE(0x0ace, 0x20ff), .driver_info = DEVICE_INSTALLER }, -- cgit v1.2.2 From c793033945bea23d7a6e0d8d94b2da6603e02af2 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Mon, 3 Nov 2008 22:14:00 -0500 Subject: ath5k: correct handling of rx status fields ath5k_rx_status fields rs_antenna and rs_more are u8s, but we were setting them with bitwise ANDs of 32-bit values. As a consequence, jumbo frames would not be discarded as intended. Then, because the hw rate value of such frames is zero, and, since "ath5k: rates cleanup", we do not fall back to the basic rate, such packets would trigger the following WARN_ON: ------------[ cut here ]------------ WARNING: at net/mac80211/rx.c:2192 __ieee80211_rx+0x4d/0x57e [mac80211]() Modules linked in: ath5k af_packet sha256_generic aes_i586 aes_generic cbc loop i915 drm binfmt_misc acpi_cpufreq fan container nls_utf8 hfsplus dm_crypt dm_mod kvm_intel kvm fuse sbp2 snd_hda_intel snd_pcm_oss snd_pcm snd_mixer_oss snd_seq_dummy snd_seq_oss arc4 joydev hid_apple ecb snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device usbhid appletouch mac80211 sky2 snd ehci_hcd ohci1394 bitrev crc32 sr_mod cdrom rtc sg uhci_hcd snd_page_alloc cfg80211 ieee1394 thermal ac battery processor button evdev unix [last unloaded: ath5k] Pid: 0, comm: swapper Tainted: G W 2.6.28-rc2-wl #14 Call Trace: [] warn_on_slowpath+0x41/0x5b [] ? sched_debug_show+0x31e/0x9c6 [] ? vprintk+0x369/0x389 [] ? _spin_unlock_irqrestore+0x54/0x58 [] ? try_to_wake_up+0x14f/0x15a [] __ieee80211_rx+0x4d/0x57e [mac80211] [] ath5k_tasklet_rx+0x5a1/0x5e4 [ath5k] [] ? clockevents_program_event+0xd4/0xe3 [] tasklet_action+0x94/0xfd [] __do_softirq+0x8c/0x13e [] do_softirq+0x39/0x55 [] irq_exit+0x46/0x85 [] do_IRQ+0x9a/0xb2 [] common_interrupt+0x28/0x30 [] ? acpi_idle_enter_bm+0x2ad/0x31b [processor] [] cpuidle_idle_call+0x65/0x9a [] cpu_idle+0x76/0xa6 [] rest_init+0x62/0x64 Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/desc.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath5k/desc.c b/drivers/net/wireless/ath5k/desc.c index dd1374052ba9..5e362a7a3620 100644 --- a/drivers/net/wireless/ath5k/desc.c +++ b/drivers/net/wireless/ath5k/desc.c @@ -531,10 +531,10 @@ static int ath5k_hw_proc_5210_rx_status(struct ath5k_hw *ah, AR5K_5210_RX_DESC_STATUS0_RECEIVE_SIGNAL); rs->rs_rate = AR5K_REG_MS(rx_status->rx_status_0, AR5K_5210_RX_DESC_STATUS0_RECEIVE_RATE); - rs->rs_antenna = rx_status->rx_status_0 & - AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANTENNA; - rs->rs_more = rx_status->rx_status_0 & - AR5K_5210_RX_DESC_STATUS0_MORE; + rs->rs_antenna = AR5K_REG_MS(rx_status->rx_status_0, + AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANTENNA); + rs->rs_more = !!(rx_status->rx_status_0 & + AR5K_5210_RX_DESC_STATUS0_MORE); /* TODO: this timestamp is 13 bit, later on we assume 15 bit */ rs->rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1, AR5K_5210_RX_DESC_STATUS1_RECEIVE_TIMESTAMP); @@ -607,10 +607,10 @@ static int ath5k_hw_proc_5212_rx_status(struct ath5k_hw *ah, AR5K_5212_RX_DESC_STATUS0_RECEIVE_SIGNAL); rs->rs_rate = AR5K_REG_MS(rx_status->rx_status_0, AR5K_5212_RX_DESC_STATUS0_RECEIVE_RATE); - rs->rs_antenna = rx_status->rx_status_0 & - AR5K_5212_RX_DESC_STATUS0_RECEIVE_ANTENNA; - rs->rs_more = rx_status->rx_status_0 & - AR5K_5212_RX_DESC_STATUS0_MORE; + rs->rs_antenna = AR5K_REG_MS(rx_status->rx_status_0, + AR5K_5212_RX_DESC_STATUS0_RECEIVE_ANTENNA); + rs->rs_more = !!(rx_status->rx_status_0 & + AR5K_5212_RX_DESC_STATUS0_MORE); rs->rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1, AR5K_5212_RX_DESC_STATUS1_RECEIVE_TIMESTAMP); rs->rs_status = 0; -- cgit v1.2.2 From 2420ebc104d38567ee977a3c15dc675a9dd3b07c Mon Sep 17 00:00:00 2001 From: Mohamed Abbas Date: Tue, 4 Nov 2008 12:21:34 -0800 Subject: iwl3945: clear scanning bits upon failure This patch ensures we clear any scan status bit when an error occurs while sending the scan command. It is the implementation of patch: "iwlwifi: clear scanning bits upon failure" for iwl3945. Signed-off-by: Mohamed Abbas Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl3945-base.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index d15a2c997954..b9eac5551d82 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -6273,6 +6273,14 @@ static void iwl3945_bg_request_scan(struct work_struct *data) return; done: + /* can not perform scan make sure we clear scanning + * bits from status so next scan request can be performed. + * if we dont clear scanning status bit here all next scan + * will fail + */ + clear_bit(STATUS_SCAN_HW, &priv->status); + clear_bit(STATUS_SCANNING, &priv->status); + /* inform mac80211 scan aborted */ queue_work(priv->workqueue, &priv->scan_completed); mutex_unlock(&priv->mutex); -- cgit v1.2.2 From 14b5433606289dbc5b6fd70ced11462f80e95003 Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Tue, 4 Nov 2008 12:21:35 -0800 Subject: iwl3945: do not send scan command if channel count zero Do not send scan command if no channels to scan. This avoids a Microcode error as reported in: http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1650 http://bugzilla.kernel.org/show_bug.cgi?id=11806 http://marc.info/?l=linux-wireless&m=122437145211886&w=2 Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl3945-base.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index b9eac5551d82..81dfcb882857 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -6256,6 +6256,11 @@ static void iwl3945_bg_request_scan(struct work_struct *data) n_probes, (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]); + if (scan->channel_count == 0) { + IWL_DEBUG_SCAN("channel count %d\n", scan->channel_count); + goto done; + } + cmd.len += le16_to_cpu(scan->tx_cmd.len) + scan->channel_count * sizeof(struct iwl3945_scan_channel); cmd.data = scan; -- cgit v1.2.2 From d54bc4e3fc5c56600a13c9ebc0a7e1077ac05d59 Mon Sep 17 00:00:00 2001 From: "Zhu, Yi" Date: Tue, 4 Nov 2008 12:21:36 -0800 Subject: iwl3945: fix deadlock on suspend This patch fixes iwl3945 deadlock during suspend by moving notify_mac out of iwl3945 mutex. This is a portion of the same fix for iwlwifi by Tomas. Signed-off-by: Zhu Yi Signed-off-by: Tomas Winkler Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl3945-base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 81dfcb882857..285b53e7e261 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -5768,7 +5768,6 @@ static void iwl3945_alive_start(struct iwl3945_priv *priv) if (priv->error_recovering) iwl3945_error_recovery(priv); - ieee80211_notify_mac(priv->hw, IEEE80211_NOTIFY_RE_ASSOC); return; restart: @@ -6013,6 +6012,7 @@ static void iwl3945_bg_alive_start(struct work_struct *data) mutex_lock(&priv->mutex); iwl3945_alive_start(priv); mutex_unlock(&priv->mutex); + ieee80211_notify_mac(priv->hw, IEEE80211_NOTIFY_RE_ASSOC); } static void iwl3945_bg_rf_kill(struct work_struct *work) -- cgit v1.2.2 From c1adbb9681c30e984272b66623c4d5774b3981e1 Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Wed, 5 Nov 2008 16:53:50 +0200 Subject: mlx4_en: Start port error flow bug fix Tried to deactivate rx ring that wasn't activated, used wrong index. Signed-off-by: Yevgeny Petrilin Signed-off-by: Jeff Garzik --- drivers/net/mlx4/en_netdev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/mlx4/en_netdev.c b/drivers/net/mlx4/en_netdev.c index a339afbeed38..a3f732418c49 100644 --- a/drivers/net/mlx4/en_netdev.c +++ b/drivers/net/mlx4/en_netdev.c @@ -706,7 +706,7 @@ tx_err: mlx4_en_release_rss_steer(priv); rx_err: for (i = 0; i < priv->rx_ring_num; i++) - mlx4_en_deactivate_rx_ring(priv, &priv->rx_ring[rx_index]); + mlx4_en_deactivate_rx_ring(priv, &priv->rx_ring[i]); cq_err: while (rx_index--) mlx4_en_deactivate_cq(priv, &priv->rx_cq[rx_index]); -- cgit v1.2.2 From db053c6b447d083f3c63e5540b70a3e521b468ca Mon Sep 17 00:00:00 2001 From: Paulius Zaleckas Date: Tue, 4 Nov 2008 13:32:31 +0200 Subject: hso: rfkill type should be WWAN Signed-off-by: Paulius Zaleckas Cc: Denis Joseph Barrow Signed-off-by: Jeff Garzik --- drivers/net/usb/hso.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index 1164c52e2c0a..3f49e8382dd8 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -2188,7 +2188,7 @@ static void hso_create_rfkill(struct hso_device *hso_dev, char *rfkn; hso_net->rfkill = rfkill_allocate(&interface_to_usbdev(interface)->dev, - RFKILL_TYPE_WLAN); + RFKILL_TYPE_WWAN); if (!hso_net->rfkill) { dev_err(dev, "%s - Out of memory", __func__); return; -- cgit v1.2.2 From 08809b25cf64a7d8deb336b779e527e88830eac9 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 1 Nov 2008 18:20:19 +0000 Subject: el3_common_init() should be __devinit, not __init Signed-off-by: Al Viro Signed-off-by: Jeff Garzik --- drivers/net/3c509.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/3c509.c b/drivers/net/3c509.c index 3a7bc524af33..c7a4f3bcc2bc 100644 --- a/drivers/net/3c509.c +++ b/drivers/net/3c509.c @@ -94,7 +94,7 @@ #include #include -static char version[] __initdata = DRV_NAME ".c:" DRV_VERSION " " DRV_RELDATE " becker@scyld.com\n"; +static char version[] __devinitdata = DRV_NAME ".c:" DRV_VERSION " " DRV_RELDATE " becker@scyld.com\n"; #ifdef EL3_DEBUG static int el3_debug = EL3_DEBUG; @@ -186,7 +186,7 @@ static int max_interrupt_work = 10; static int nopnp; #endif -static int __init el3_common_init(struct net_device *dev); +static int __devinit el3_common_init(struct net_device *dev); static void el3_common_remove(struct net_device *dev); static ushort id_read_eeprom(int index); static ushort read_eeprom(int ioaddr, int index); @@ -537,7 +537,7 @@ static struct mca_driver el3_mca_driver = { static int mca_registered; #endif /* CONFIG_MCA */ -static int __init el3_common_init(struct net_device *dev) +static int __devinit el3_common_init(struct net_device *dev) { struct el3_private *lp = netdev_priv(dev); int err; -- cgit v1.2.2 From cd17fa7b8f1dd24b23c464ebcb14e7c058e15097 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 3 Nov 2008 23:08:04 +0000 Subject: sfc: Correct address of gPXE boot configuration in EEPROM Due to a hardware bug, the originally assigned range cannot reliably be used for boot configuration and must not be modifiable through ethtool. Signed-off-by: Ben Hutchings Signed-off-by: Jeff Garzik --- drivers/net/sfc/ethtool.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/sfc/ethtool.c b/drivers/net/sfc/ethtool.c index fa98af58223e..cd0d0873d978 100644 --- a/drivers/net/sfc/ethtool.c +++ b/drivers/net/sfc/ethtool.c @@ -174,8 +174,8 @@ static struct efx_ethtool_stat efx_ethtool_stats[] = { /* EEPROM range with gPXE configuration */ #define EFX_ETHTOOL_EEPROM_MAGIC 0xEFAB -#define EFX_ETHTOOL_EEPROM_MIN 0x100U -#define EFX_ETHTOOL_EEPROM_MAX 0x400U +#define EFX_ETHTOOL_EEPROM_MIN 0x800U +#define EFX_ETHTOOL_EEPROM_MAX 0x1800U /************************************************************************** * -- cgit v1.2.2 From 939a9516416ad8ccec27aa05bd19236c550c0c03 Mon Sep 17 00:00:00 2001 From: Jonathan McDowell Date: Tue, 4 Nov 2008 07:51:38 +0000 Subject: [netdrvr] usb/hso: Cleanup rfkill error handling Yup, this appears to be the problem, thanks. I think &hso_net->net->dev is more intuitive for the error message, so I've used that. I've also added missing line endings on the error messages and set our local rfkill structure element to NULL on failure so we don't try to call rfkill_unregister on driver removal if we failed to register at all. The patch below Works For Me (TM); the device is detected fine, can be removed without problems and connects ok. I'll have a prod at why the rfkill stuff isn't working next, but I believe this cleanup of the error handling is appropriate no matter what the issue with registration is. Signed-Off-By: Jonathan McDowell Signed-off-by: Jeff Garzik --- drivers/net/usb/hso.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index 3f49e8382dd8..8e90891f0e42 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -2184,19 +2184,20 @@ static void hso_create_rfkill(struct hso_device *hso_dev, struct usb_interface *interface) { struct hso_net *hso_net = dev2net(hso_dev); - struct device *dev = hso_dev->dev; + struct device *dev = &hso_net->net->dev; char *rfkn; hso_net->rfkill = rfkill_allocate(&interface_to_usbdev(interface)->dev, RFKILL_TYPE_WWAN); if (!hso_net->rfkill) { - dev_err(dev, "%s - Out of memory", __func__); + dev_err(dev, "%s - Out of memory\n", __func__); return; } rfkn = kzalloc(20, GFP_KERNEL); if (!rfkn) { rfkill_free(hso_net->rfkill); - dev_err(dev, "%s - Out of memory", __func__); + hso_net->rfkill = NULL; + dev_err(dev, "%s - Out of memory\n", __func__); return; } snprintf(rfkn, 20, "hso-%d", @@ -2209,7 +2210,8 @@ static void hso_create_rfkill(struct hso_device *hso_dev, kfree(rfkn); hso_net->rfkill->name = NULL; rfkill_free(hso_net->rfkill); - dev_err(dev, "%s - Failed to register rfkill", __func__); + hso_net->rfkill = NULL; + dev_err(dev, "%s - Failed to register rfkill\n", __func__); return; } } -- cgit v1.2.2 From 8c2f5fa51e1b22db53acf4f3918b6f590b4a35a1 Mon Sep 17 00:00:00 2001 From: Brice Goglin Date: Mon, 10 Nov 2008 13:58:41 +0100 Subject: myri10ge: fix stop/go ordering even more The doorbell writes may be seen out of order by the firmware if they are in WC memory since the tx spin(un)lock does not flush WC writes. Hence if the "stop" is written on a different CPU than the "go", it is possible that the stop will arrive after the go unless we add an explicit memory barrier (and mmiowb() is not enough). It fixes transmit hangs in multi tx queue mode. Signed-off-by: Brice Goglin Signed-off-by: Jeff Garzik --- drivers/net/myri10ge/myri10ge.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c index a5f428bcc0eb..b37867097308 100644 --- a/drivers/net/myri10ge/myri10ge.c +++ b/drivers/net/myri10ge/myri10ge.c @@ -75,7 +75,7 @@ #include "myri10ge_mcp.h" #include "myri10ge_mcp_gen_header.h" -#define MYRI10GE_VERSION_STR "1.4.3-1.375" +#define MYRI10GE_VERSION_STR "1.4.3-1.378" MODULE_DESCRIPTION("Myricom 10G driver (10GbE)"); MODULE_AUTHOR("Maintainer: help@myri.com"); @@ -1393,6 +1393,7 @@ myri10ge_tx_done(struct myri10ge_slice_state *ss, int mcp_index) if (tx->req == tx->done) { tx->queue_active = 0; put_be32(htonl(1), tx->send_stop); + mb(); mmiowb(); } __netif_tx_unlock(dev_queue); @@ -2865,6 +2866,7 @@ again: if ((mgp->dev->real_num_tx_queues > 1) && tx->queue_active == 0) { tx->queue_active = 1; put_be32(htonl(1), tx->send_go); + mb(); mmiowb(); } tx->pkt_start++; -- cgit v1.2.2 From 9f64306b8a3949b74cb11d3b2f613e8a2af20fa6 Mon Sep 17 00:00:00 2001 From: Divy Le Ray Date: Sun, 9 Nov 2008 00:55:28 -0800 Subject: cxgb3 - eeprom read fixes Protect against invalid phy entries in the eeprom. Extend eeprom access timeout. Signed-off-by: Divy Le Ray Signed-off-by: Jeff Garzik --- drivers/net/cxgb3/t3_hw.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c index 968f64be3743..9a0898b0dbce 100644 --- a/drivers/net/cxgb3/t3_hw.c +++ b/drivers/net/cxgb3/t3_hw.c @@ -572,7 +572,7 @@ struct t3_vpd { u32 pad; /* for multiple-of-4 sizing and alignment */ }; -#define EEPROM_MAX_POLL 4 +#define EEPROM_MAX_POLL 40 #define EEPROM_STAT_ADDR 0x4000 #define VPD_BASE 0xc00 @@ -3690,6 +3690,12 @@ int t3_prep_adapter(struct adapter *adapter, const struct adapter_info *ai, ; pti = &port_types[adapter->params.vpd.port_type[j]]; + if (!pti->phy_prep) { + CH_ALERT(adapter, "Invalid port type index %d\n", + adapter->params.vpd.port_type[j]); + return -EINVAL; + } + ret = pti->phy_prep(&p->phy, adapter, ai->phy_base_addr + j, ai->mdio_ops); if (ret) -- cgit v1.2.2 From f9ee3882969224aa9f086268020c31819be6ae99 Mon Sep 17 00:00:00 2001 From: Divy Le Ray Date: Sun, 9 Nov 2008 00:55:33 -0800 Subject: cxgb3 - Limit multiqueue setting to msi-x Allow multiqueue setting in MSI-X mode only Signed-off-by: Divy Le Ray Signed-off-by: Jeff Garzik --- drivers/net/cxgb3/cxgb3_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c index 1ace41a13ac3..f66367ed6932 100644 --- a/drivers/net/cxgb3/cxgb3_main.c +++ b/drivers/net/cxgb3/cxgb3_main.c @@ -2699,7 +2699,7 @@ static void set_nqsets(struct adapter *adap) int hwports = adap->params.nports; int nqsets = SGE_QSETS; - if (adap->params.rev > 0) { + if (adap->params.rev > 0 && adap->flags & USING_MSIX) { if (hwports == 2 && (hwports * nqsets > SGE_QSETS || num_cpus >= nqsets / hwports)) -- cgit v1.2.2 From cf3760dad576c8dfb4fef4b8a8a08a027bf02583 Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Thu, 6 Nov 2008 17:06:42 -0600 Subject: RDMA/cxgb3: deadlock in iw_cxgb3 can cause hang when configuring interface. When the iw_cxgb3 module's cxgb3_client "add" func gets called by the cxgb3 module, the iwarp driver ends up calling the ethtool ops get_drvinfo function in cxgb3 to get the fw version and other info. Currently the iwarp driver grabs the rtnl lock around this down call to serialize. As of 2.6.27 or so, things changed such that the rtnl lock is held around the call to the netdev driver open function. Also the cxgb3_client "add" function doesn't get called if the device is down. So, if you load cxgb3, then load iw_cxgb3, then ifconfig up the device, the iw_cxgb3 add func gets called with the rtnl_lock held. If you load cxgb3, ifconfig up the device, then load iw_cxgb3, the add func gets called without the rtnl_lock held. The former causes the deadlock, the latter does not. In addition, there are iw_cxgb3 sysfs handlers that also can call down into cxgb3 to gather the fw and hw versions. These can be called concurrently on different processors and at any time. Thus we need to push this serialization down in the cxgb3 driver get_drvinfo func. The fix is to remove rtnl lock usage, and use a per-device lock in cxgb3. Signed-off-by: Steve Wise Signed-off-by: Jeff Garzik --- drivers/net/cxgb3/cxgb3_main.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c index f66367ed6932..2c341f83d327 100644 --- a/drivers/net/cxgb3/cxgb3_main.c +++ b/drivers/net/cxgb3/cxgb3_main.c @@ -1307,8 +1307,10 @@ static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) u32 fw_vers = 0; u32 tp_vers = 0; + spin_lock(&adapter->stats_lock); t3_get_fw_version(adapter, &fw_vers); t3_get_tp_version(adapter, &tp_vers); + spin_unlock(&adapter->stats_lock); strcpy(info->driver, DRV_NAME); strcpy(info->version, DRV_VERSION); -- cgit v1.2.2 From 347c8d83cd9f546a8357e1ab12fa6867707975d8 Mon Sep 17 00:00:00 2001 From: "Dasgupta, Romit" Date: Thu, 6 Nov 2008 15:46:18 +0530 Subject: [netdrvr] smc911x: fix for driver resume (and compilation warning) I am trying out suspend, resume on an OMAP3 based board. What I see during resume is that the SMC911x driver resume routing gets stuck after trying to transmit the packet out of the controller. Some debug messages below: --> smc911x_drv_resume eth0: --> smc911x_reset eth0: smc911x_reset timeout waiting for PM restore eth0: --> smc911x_enable eth0: --> smc911x_phy_configure() eth0: --> smc911x_phy_reset() eth0: phy caps=0x782d eth0: phy advertised caps=0x0de1 eth0: --> smc911x_phy_check_media smc911x_phy_read: phyaddr=0x1, phyreg=0x01, phydata=0x7809 smc911x_phy_read: phyaddr=0x1, phyreg=0x01, phydata=0x7809 eth0: link down Restarting tasks ... eth0: --> smc911x_hard_start_xmit eth0: --> smc911x_hardware_send_pkt eth0: --> smc911x_hard_start_xmit eth0: --> smc911x_hardware_send_pkt eth0: --> smc911x_hard_start_xmit eth0: --> smc911x_hardware_send_pkt nfs: server 172.24.190.217 not responding, still trying nfs: server 172.24.190.217 not responding, still trying The following change makes it work fine: (The change within smc911x_drv_probe function was to get rid of a compilation warning). Signed-off-by: Romit Dasgupta Signed-off-by: Jeff Garzik --- drivers/net/smc911x.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c index 5051554ff05b..1f26ab0e7986 100644 --- a/drivers/net/smc911x.c +++ b/drivers/net/smc911x.c @@ -2050,7 +2050,9 @@ err_out: */ static int smc911x_drv_probe(struct platform_device *pdev) { +#ifdef SMC_DYNAMIC_BUS_CONFIG struct smc911x_platdata *pd = pdev->dev.platform_data; +#endif struct net_device *ndev; struct resource *res; struct smc911x_local *lp; @@ -2182,9 +2184,9 @@ static int smc911x_drv_resume(struct platform_device *dev) if (netif_running(ndev)) { smc911x_reset(ndev); - smc911x_enable(ndev); if (lp->phy_type != 0) smc911x_phy_configure(&lp->phy_configure); + smc911x_enable(ndev); netif_device_attach(ndev); } } -- cgit v1.2.2 From b3e123cf65baadc0cc30a843fd48cfd6a4b2e1ca Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Wed, 12 Nov 2008 10:16:47 -0800 Subject: RDMA/cxgb3: Fix deadlock in iw_cxgb3 (hang when configuring interface) When the iw_cxgb3 module's cxgb3_client "add" func gets called by the cxgb3 module, the iwarp driver ends up calling the ethtool ops get_drvinfo function in cxgb3 to get the fw version and other info. Currently the iwarp driver grabs the rtnl lock around this down call to serialize. As of 2.6.27 or so, things changed such that the rtnl lock is held around the call to the netdev driver open function. Also the cxgb3_client "add" function doesn't get called if the device is down. So, if you load cxgb3, then load iw_cxgb3, then ifconfig up the device, the iw_cxgb3 add func gets called with the rtnl_lock held. If you load cxgb3, ifconfig up the device, then load iw_cxgb3, the add func gets called without the rtnl_lock held. The former causes the deadlock, the latter does not. In addition, there are iw_cxgb3 sysfs handlers that also can call down into cxgb3 to gather the fw and hw versions. These can be called concurrently on different processors and at any time. Thus we need to push this serialization down in the cxgb3 driver get_drvinfo func. The fix is to remove rtnl lock usage, and use a per-device lock in cxgb3. Signed-off-by: Steve Wise Acked-by: Divy Le Ray Signed-off-by: Roland Dreier --- drivers/net/cxgb3/cxgb3_main.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c index 1ace41a13ac3..5e663ccda4d4 100644 --- a/drivers/net/cxgb3/cxgb3_main.c +++ b/drivers/net/cxgb3/cxgb3_main.c @@ -1307,8 +1307,10 @@ static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) u32 fw_vers = 0; u32 tp_vers = 0; + spin_lock(&adapter->stats_lock); t3_get_fw_version(adapter, &fw_vers); t3_get_tp_version(adapter, &tp_vers); + spin_unlock(&adapter->stats_lock); strcpy(info->driver, DRV_NAME); strcpy(info->version, DRV_VERSION); -- cgit v1.2.2 From 8f7c41d4cec91cdbfa89b4a77d5a628938875366 Mon Sep 17 00:00:00 2001 From: Ivan Kuten Date: Mon, 10 Nov 2008 19:39:25 -0600 Subject: rtl8187: Add Abocom USB ID Signed-off-by: Ivan Kuten Signed-off-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/rtl8187_dev.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c index 431e3c78bf27..0ce9fb037950 100644 --- a/drivers/net/wireless/rtl8187_dev.c +++ b/drivers/net/wireless/rtl8187_dev.c @@ -48,6 +48,8 @@ static struct usb_device_id rtl8187_table[] __devinitdata = { {USB_DEVICE(0x03f0, 0xca02), .driver_info = DEVICE_RTL8187}, /* Sitecom */ {USB_DEVICE(0x0df6, 0x000d), .driver_info = DEVICE_RTL8187}, + /* Abocom */ + {USB_DEVICE(0x13d1, 0xabe6), .driver_info = DEVICE_RTL8187}, {} }; -- cgit v1.2.2 From f3c769185a28b7947d97b3552a977102c1fac3f2 Mon Sep 17 00:00:00 2001 From: Bob Jolliffe Date: Wed, 12 Nov 2008 20:16:59 +0000 Subject: rtl8187 : support for Sitecom WL-168 0001 v4 the Sitecom 0001 v4 with product id 0x0df6:0028, uses Realtek's RTL8187B and work fine with new 2.6.27 driver. Signed-off-by: John W. Linville --- drivers/net/wireless/rtl8187_dev.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c index 0ce9fb037950..69eb0132593b 100644 --- a/drivers/net/wireless/rtl8187_dev.c +++ b/drivers/net/wireless/rtl8187_dev.c @@ -48,6 +48,7 @@ static struct usb_device_id rtl8187_table[] __devinitdata = { {USB_DEVICE(0x03f0, 0xca02), .driver_info = DEVICE_RTL8187}, /* Sitecom */ {USB_DEVICE(0x0df6, 0x000d), .driver_info = DEVICE_RTL8187}, + {USB_DEVICE(0x0df6, 0x0028), .driver_info = DEVICE_RTL8187B}, /* Abocom */ {USB_DEVICE(0x13d1, 0xabe6), .driver_info = DEVICE_RTL8187}, {} -- cgit v1.2.2 From f7cd168645dda3e9067f24fabbfa787f9a237488 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 12 Nov 2008 16:54:22 -0500 Subject: hostap: pad the skb->cb usage in lieu of a proper fix Like mac80211 did, this driver makes 'clever' use of skb->cb to pass information along with an skb as it is requeued from the virtual device to the physical wireless device. Unfortunately, that trick no longer works... Unlike mac80211, code complexity and driver apathy makes this hack the best option we have in the short run. Hopefully someone will eventually be motivated to code a proper fix before all the effected hardware dies. (Above text by me. Johannes officially disavows all knowledge of this hack. -- JWL) Signed-off-by: Johannes Berg Cc: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/hostap/hostap_wlan.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/hostap/hostap_wlan.h b/drivers/net/wireless/hostap/hostap_wlan.h index ffdf4876121b..a68f97c39359 100644 --- a/drivers/net/wireless/hostap/hostap_wlan.h +++ b/drivers/net/wireless/hostap/hostap_wlan.h @@ -918,9 +918,12 @@ struct hostap_interface { /* * TX meta data - stored in skb->cb buffer, so this must not be increased over - * the 40-byte limit + * the 48-byte limit. + * THE PADDING THIS STARTS WITH IS A HORRIBLE HACK THAT SHOULD NOT LIVE + * TO SEE THE DAY. */ struct hostap_skb_tx_data { + unsigned int __padding_for_default_qdiscs; u32 magic; /* HOSTAP_SKB_TX_DATA_MAGIC */ u8 rate; /* transmit rate */ #define HOSTAP_TX_FLAGS_WDS BIT(0) -- cgit v1.2.2 From e23a59e1ca6d177a57a7791b3629db93ff1d9813 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 12 Nov 2008 14:32:54 -0800 Subject: niu: Fix readq implementation when architecture does not provide one. This fixes a TX hang reported by Jesper Dangaard Brouer. When an architecutre cannot provide a fully functional 64-bit atomic readq/writeq, the driver must implement it's own. This is because only the driver can say whether doing something like using two 32-bit reads to implement the full 64-bit read will actually work properly. In particular one of the issues is whether the top 32-bits or the bottom 32-bits of the 64-bit register should be read first. There could be side effects, and in fact that is exactly the problem here. The TX_CS register has counters in the upper 32-bits and state bits in the lower 32-bits. A read clears the state bits. We would read the counter half before the state bit half. That first read would clear the state bits, and then the driver thinks that no interrupts are pending because the interrupt indication state bits are seen clear every time. Fix this by reading the bottom half before the upper half. Tested-by: Jesper Dangaard Brouer Signed-off-by: David S. Miller --- drivers/net/niu.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/niu.c b/drivers/net/niu.c index 9acb5d70a3ae..d8463b1c3df3 100644 --- a/drivers/net/niu.c +++ b/drivers/net/niu.c @@ -51,8 +51,7 @@ MODULE_VERSION(DRV_MODULE_VERSION); #ifndef readq static u64 readq(void __iomem *reg) { - return (((u64)readl(reg + 0x4UL) << 32) | - (u64)readl(reg)); + return ((u64) readl(reg)) | (((u64) readl(reg + 4UL)) << 32); } static void writeq(u64 val, void __iomem *reg) -- cgit v1.2.2 From b2af2c1d3e4ddeea9d02c46d0df0c322cc7b7061 Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Wed, 12 Nov 2008 16:23:44 -0800 Subject: bnx2: fix poll_controller to pass proper structures and check all rx queues Fix bnx2 so that netpoll works properly. Specifically: 1) Fix parameters to bnx2_interrupt to be a struct bnx2_napi rather than a struct net_device 2) Fix poll_controller method to check every queue in the rx case so frames aren't missed Signed-off-by: Neil Horman Signed-off-by: David S. Miller --- drivers/net/bnx2.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index 430d430bce29..d07e3f148951 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -7204,10 +7204,13 @@ static void poll_bnx2(struct net_device *dev) { struct bnx2 *bp = netdev_priv(dev); + int i; - disable_irq(bp->pdev->irq); - bnx2_interrupt(bp->pdev->irq, dev); - enable_irq(bp->pdev->irq); + for (i = 0; i < bp->irq_nvecs; i++) { + disable_irq(bp->irq_tbl[i].vector); + bnx2_interrupt(bp->irq_tbl[i].vector, &bp->bnx2_napi[i]); + enable_irq(bp->irq_tbl[i].vector); + } } #endif -- cgit v1.2.2 From ccf95402d0ae6f433f29ce88cfd589cec8fc81ad Mon Sep 17 00:00:00 2001 From: Jason Cooper Date: Tue, 11 Nov 2008 13:02:53 -0500 Subject: USB: net: asix: add support for Cables-to-Go USB Ethernet adapter Add support to drivers/net/usb/asix.c for the Cables-to-Go "USB 2.0 to 10/100 Ethernet Adapter". USB id 0b95:772a. Signed-off-by: Jason Cooper Signed-off-by: Greg Kroah-Hartman --- drivers/net/usb/asix.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c index 37ecf845edfe..e12cdb4543b4 100644 --- a/drivers/net/usb/asix.c +++ b/drivers/net/usb/asix.c @@ -1444,6 +1444,10 @@ static const struct usb_device_id products [] = { // Apple USB Ethernet Adapter USB_DEVICE(0x05ac, 0x1402), .driver_info = (unsigned long) &ax88772_info, +}, { + // Cables-to-Go USB Ethernet Adapter + USB_DEVICE(0x0b95, 0x772a), + .driver_info = (unsigned long) &ax88772_info, }, { }, // END }; -- cgit v1.2.2 From 847cdf42d589882aca683b6fb65b2c7832e92231 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Fri, 14 Nov 2008 05:19:00 -0700 Subject: powerpc/mpc5200: fix bestcomm Kconfig dependencies Without this patch it is possible to select drivers which require bestcomm support without bestcomm support being selected. This patch reworks the bestcomm dependencies to ensure the correct bestcomm tasks are always enabled. Reported-by: Hans Lehmann Signed-off-by: Grant Likely --- drivers/net/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 11f143f4adf6..231eeaf1d552 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1825,9 +1825,10 @@ config FEC2 config FEC_MPC52xx tristate "MPC52xx FEC driver" - depends on PPC_MPC52xx && PPC_BESTCOMM_FEC + depends on PPC_MPC52xx && PPC_BESTCOMM select CRC32 select PHYLIB + select PPC_BESTCOMM_FEC ---help--- This option enables support for the MPC5200's on-chip Fast Ethernet Controller -- cgit v1.2.2 From e3e081e1d5c4791f4416ed57b7a2f143ab9e5b09 Mon Sep 17 00:00:00 2001 From: Santwona Behera Date: Fri, 14 Nov 2008 14:44:08 -0800 Subject: NIU: Add Sun CP3260 ATCA blade support This patch adds support for the Sun CP3260 ATCA blade which is a N2 based ATCA blade with 2 NIU ports. The NIU ports do not have on-board PHY. Signed-off-by: Santwona Behera Signed-off-by: David S. Miller --- drivers/net/niu.c | 286 ++++++++++++++++++++++++++++++++++++++++++++++++++++-- drivers/net/niu.h | 13 +++ 2 files changed, 293 insertions(+), 6 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/niu.c b/drivers/net/niu.c index d8463b1c3df3..be6b4d7e2bb4 100644 --- a/drivers/net/niu.c +++ b/drivers/net/niu.c @@ -406,7 +406,7 @@ static int esr2_set_rx_cfg(struct niu *np, unsigned long channel, u32 val) } /* Mode is always 10G fiber. */ -static int serdes_init_niu(struct niu *np) +static int serdes_init_niu_10g_fiber(struct niu *np) { struct niu_link_config *lp = &np->link_config; u32 tx_cfg, rx_cfg; @@ -443,6 +443,223 @@ static int serdes_init_niu(struct niu *np) return 0; } +static int serdes_init_niu_1g_serdes(struct niu *np) +{ + struct niu_link_config *lp = &np->link_config; + u16 pll_cfg, pll_sts; + int max_retry = 100; + u64 sig, mask, val; + u32 tx_cfg, rx_cfg; + unsigned long i; + int err; + + tx_cfg = (PLL_TX_CFG_ENTX | PLL_TX_CFG_SWING_1375MV | + PLL_TX_CFG_RATE_HALF); + rx_cfg = (PLL_RX_CFG_ENRX | PLL_RX_CFG_TERM_0P8VDDT | + PLL_RX_CFG_ALIGN_ENA | PLL_RX_CFG_LOS_LTHRESH | + PLL_RX_CFG_RATE_HALF); + + if (np->port == 0) + rx_cfg |= PLL_RX_CFG_EQ_LP_ADAPTIVE; + + if (lp->loopback_mode == LOOPBACK_PHY) { + u16 test_cfg = PLL_TEST_CFG_LOOPBACK_CML_DIS; + + mdio_write(np, np->port, NIU_ESR2_DEV_ADDR, + ESR2_TI_PLL_TEST_CFG_L, test_cfg); + + tx_cfg |= PLL_TX_CFG_ENTEST; + rx_cfg |= PLL_RX_CFG_ENTEST; + } + + /* Initialize PLL for 1G */ + pll_cfg = (PLL_CFG_ENPLL | PLL_CFG_MPY_8X); + + err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR, + ESR2_TI_PLL_CFG_L, pll_cfg); + if (err) { + dev_err(np->device, PFX "NIU Port %d " + "serdes_init_niu_1g_serdes: " + "mdio write to ESR2_TI_PLL_CFG_L failed", np->port); + return err; + } + + pll_sts = PLL_CFG_ENPLL; + + err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR, + ESR2_TI_PLL_STS_L, pll_sts); + if (err) { + dev_err(np->device, PFX "NIU Port %d " + "serdes_init_niu_1g_serdes: " + "mdio write to ESR2_TI_PLL_STS_L failed", np->port); + return err; + } + + udelay(200); + + /* Initialize all 4 lanes of the SERDES. */ + for (i = 0; i < 4; i++) { + err = esr2_set_tx_cfg(np, i, tx_cfg); + if (err) + return err; + } + + for (i = 0; i < 4; i++) { + err = esr2_set_rx_cfg(np, i, rx_cfg); + if (err) + return err; + } + + switch (np->port) { + case 0: + val = (ESR_INT_SRDY0_P0 | ESR_INT_DET0_P0); + mask = val; + break; + + case 1: + val = (ESR_INT_SRDY0_P1 | ESR_INT_DET0_P1); + mask = val; + break; + + default: + return -EINVAL; + } + + while (max_retry--) { + sig = nr64(ESR_INT_SIGNALS); + if ((sig & mask) == val) + break; + + mdelay(500); + } + + if ((sig & mask) != val) { + dev_err(np->device, PFX "Port %u signal bits [%08x] are not " + "[%08x]\n", np->port, (int) (sig & mask), (int) val); + return -ENODEV; + } + + return 0; +} + +static int serdes_init_niu_10g_serdes(struct niu *np) +{ + struct niu_link_config *lp = &np->link_config; + u32 tx_cfg, rx_cfg, pll_cfg, pll_sts; + int max_retry = 100; + u64 sig, mask, val; + unsigned long i; + int err; + + tx_cfg = (PLL_TX_CFG_ENTX | PLL_TX_CFG_SWING_1375MV); + rx_cfg = (PLL_RX_CFG_ENRX | PLL_RX_CFG_TERM_0P8VDDT | + PLL_RX_CFG_ALIGN_ENA | PLL_RX_CFG_LOS_LTHRESH | + PLL_RX_CFG_EQ_LP_ADAPTIVE); + + if (lp->loopback_mode == LOOPBACK_PHY) { + u16 test_cfg = PLL_TEST_CFG_LOOPBACK_CML_DIS; + + mdio_write(np, np->port, NIU_ESR2_DEV_ADDR, + ESR2_TI_PLL_TEST_CFG_L, test_cfg); + + tx_cfg |= PLL_TX_CFG_ENTEST; + rx_cfg |= PLL_RX_CFG_ENTEST; + } + + /* Initialize PLL for 10G */ + pll_cfg = (PLL_CFG_ENPLL | PLL_CFG_MPY_10X); + + err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR, + ESR2_TI_PLL_CFG_L, pll_cfg & 0xffff); + if (err) { + dev_err(np->device, PFX "NIU Port %d " + "serdes_init_niu_10g_serdes: " + "mdio write to ESR2_TI_PLL_CFG_L failed", np->port); + return err; + } + + pll_sts = PLL_CFG_ENPLL; + + err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR, + ESR2_TI_PLL_STS_L, pll_sts & 0xffff); + if (err) { + dev_err(np->device, PFX "NIU Port %d " + "serdes_init_niu_10g_serdes: " + "mdio write to ESR2_TI_PLL_STS_L failed", np->port); + return err; + } + + udelay(200); + + /* Initialize all 4 lanes of the SERDES. */ + for (i = 0; i < 4; i++) { + err = esr2_set_tx_cfg(np, i, tx_cfg); + if (err) + return err; + } + + for (i = 0; i < 4; i++) { + err = esr2_set_rx_cfg(np, i, rx_cfg); + if (err) + return err; + } + + /* check if serdes is ready */ + + switch (np->port) { + case 0: + mask = ESR_INT_SIGNALS_P0_BITS; + val = (ESR_INT_SRDY0_P0 | + ESR_INT_DET0_P0 | + ESR_INT_XSRDY_P0 | + ESR_INT_XDP_P0_CH3 | + ESR_INT_XDP_P0_CH2 | + ESR_INT_XDP_P0_CH1 | + ESR_INT_XDP_P0_CH0); + break; + + case 1: + mask = ESR_INT_SIGNALS_P1_BITS; + val = (ESR_INT_SRDY0_P1 | + ESR_INT_DET0_P1 | + ESR_INT_XSRDY_P1 | + ESR_INT_XDP_P1_CH3 | + ESR_INT_XDP_P1_CH2 | + ESR_INT_XDP_P1_CH1 | + ESR_INT_XDP_P1_CH0); + break; + + default: + return -EINVAL; + } + + while (max_retry--) { + sig = nr64(ESR_INT_SIGNALS); + if ((sig & mask) == val) + break; + + mdelay(500); + } + + if ((sig & mask) != val) { + pr_info(PFX "NIU Port %u signal bits [%08x] are not " + "[%08x] for 10G...trying 1G\n", + np->port, (int) (sig & mask), (int) val); + + /* 10G failed, try initializing at 1G */ + err = serdes_init_niu_1g_serdes(np); + if (!err) { + np->flags &= ~NIU_FLAGS_10G; + np->mac_xcvr = MAC_XCVR_PCS; + } else { + dev_err(np->device, PFX "Port %u 10G/1G SERDES " + "Link Failed \n", np->port); + return -ENODEV; + } + } + return 0; +} + static int esr_read_rxtx_ctrl(struct niu *np, unsigned long chan, u32 *val) { int err; @@ -1954,13 +2171,23 @@ static const struct niu_phy_ops phy_ops_10g_serdes = { .link_status = link_status_10g_serdes, }; +static const struct niu_phy_ops phy_ops_10g_serdes_niu = { + .serdes_init = serdes_init_niu_10g_serdes, + .link_status = link_status_10g_serdes, +}; + +static const struct niu_phy_ops phy_ops_1g_serdes_niu = { + .serdes_init = serdes_init_niu_1g_serdes, + .link_status = link_status_1g_serdes, +}; + static const struct niu_phy_ops phy_ops_1g_rgmii = { .xcvr_init = xcvr_init_1g_rgmii, .link_status = link_status_1g_rgmii, }; static const struct niu_phy_ops phy_ops_10g_fiber_niu = { - .serdes_init = serdes_init_niu, + .serdes_init = serdes_init_niu_10g_fiber, .xcvr_init = xcvr_init_10g, .link_status = link_status_10g, }; @@ -1998,11 +2225,21 @@ struct niu_phy_template { u32 phy_addr_base; }; -static const struct niu_phy_template phy_template_niu = { +static const struct niu_phy_template phy_template_niu_10g_fiber = { .ops = &phy_ops_10g_fiber_niu, .phy_addr_base = 16, }; +static const struct niu_phy_template phy_template_niu_10g_serdes = { + .ops = &phy_ops_10g_serdes_niu, + .phy_addr_base = 0, +}; + +static const struct niu_phy_template phy_template_niu_1g_serdes = { + .ops = &phy_ops_1g_serdes_niu, + .phy_addr_base = 0, +}; + static const struct niu_phy_template phy_template_10g_fiber = { .ops = &phy_ops_10g_fiber, .phy_addr_base = 8, @@ -2182,8 +2419,25 @@ static int niu_determine_phy_disposition(struct niu *np) u32 phy_addr_off = 0; if (plat_type == PLAT_TYPE_NIU) { - tp = &phy_template_niu; - phy_addr_off += np->port; + switch (np->flags & + (NIU_FLAGS_10G | + NIU_FLAGS_FIBER | + NIU_FLAGS_XCVR_SERDES)) { + case NIU_FLAGS_10G | NIU_FLAGS_XCVR_SERDES: + /* 10G Serdes */ + tp = &phy_template_niu_10g_serdes; + break; + case NIU_FLAGS_XCVR_SERDES: + /* 1G Serdes */ + tp = &phy_template_niu_1g_serdes; + break; + case NIU_FLAGS_10G | NIU_FLAGS_FIBER: + /* 10G Fiber */ + default: + tp = &phy_template_niu_10g_fiber; + phy_addr_off += np->port; + break; + } } else { switch (np->flags & (NIU_FLAGS_10G | @@ -7213,6 +7467,12 @@ static int __devinit niu_phy_type_prop_decode(struct niu *np, np->flags |= NIU_FLAGS_10G; np->flags &= ~NIU_FLAGS_FIBER; np->mac_xcvr = MAC_XCVR_XPCS; + } else if (!strcmp(phy_prop, "xgsd") || !strcmp(phy_prop, "gsd")) { + /* 10G Serdes or 1G Serdes, default to 10G */ + np->flags |= NIU_FLAGS_10G; + np->flags &= ~NIU_FLAGS_FIBER; + np->flags |= NIU_FLAGS_XCVR_SERDES; + np->mac_xcvr = MAC_XCVR_XPCS; } else { return -EINVAL; } @@ -7741,6 +8001,8 @@ static int __devinit walk_phys(struct niu *np, struct niu_parent *parent) u32 val; int err; + num_10g = num_1g = 0; + if (!strcmp(np->vpd.model, NIU_ALONSO_MDL_STR) || !strcmp(np->vpd.model, NIU_KIMI_MDL_STR)) { num_10g = 0; @@ -7757,6 +8019,16 @@ static int __devinit walk_phys(struct niu *np, struct niu_parent *parent) parent->num_ports = 2; val = (phy_encode(PORT_TYPE_10G, 0) | phy_encode(PORT_TYPE_10G, 1)); + } else if ((np->flags & NIU_FLAGS_XCVR_SERDES) && + (parent->plat_type == PLAT_TYPE_NIU)) { + /* this is the Monza case */ + if (np->flags & NIU_FLAGS_10G) { + val = (phy_encode(PORT_TYPE_10G, 0) | + phy_encode(PORT_TYPE_10G, 1)); + } else { + val = (phy_encode(PORT_TYPE_1G, 0) | + phy_encode(PORT_TYPE_1G, 1)); + } } else { err = fill_phy_probe_info(np, parent, info); if (err) @@ -8656,7 +8928,9 @@ static void __devinit niu_device_announce(struct niu *np) dev->name, (np->flags & NIU_FLAGS_XMAC ? "XMAC" : "BMAC"), (np->flags & NIU_FLAGS_10G ? "10G" : "1G"), - (np->flags & NIU_FLAGS_FIBER ? "FIBER" : "COPPER"), + (np->flags & NIU_FLAGS_FIBER ? "FIBER" : + (np->flags & NIU_FLAGS_XCVR_SERDES ? "SERDES" : + "COPPER")), (np->mac_xcvr == MAC_XCVR_MII ? "MII" : (np->mac_xcvr == MAC_XCVR_PCS ? "PCS" : "XPCS")), np->vpd.phy_type); diff --git a/drivers/net/niu.h b/drivers/net/niu.h index c6fa883daa22..180ca8ae93de 100644 --- a/drivers/net/niu.h +++ b/drivers/net/niu.h @@ -1048,6 +1048,13 @@ #define PLL_CFG_LD_SHIFT 8 #define PLL_CFG_MPY 0x0000001e #define PLL_CFG_MPY_SHIFT 1 +#define PLL_CFG_MPY_4X 0x0 +#define PLL_CFG_MPY_5X 0x00000002 +#define PLL_CFG_MPY_6X 0x00000004 +#define PLL_CFG_MPY_8X 0x00000008 +#define PLL_CFG_MPY_10X 0x0000000a +#define PLL_CFG_MPY_12X 0x0000000c +#define PLL_CFG_MPY_12P5X 0x0000000e #define PLL_CFG_ENPLL 0x00000001 #define ESR2_TI_PLL_STS_L (ESR2_BASE + 0x002) @@ -1093,6 +1100,9 @@ #define PLL_TX_CFG_INVPAIR 0x00000080 #define PLL_TX_CFG_RATE 0x00000060 #define PLL_TX_CFG_RATE_SHIFT 5 +#define PLL_TX_CFG_RATE_FULL 0x0 +#define PLL_TX_CFG_RATE_HALF 0x20 +#define PLL_TX_CFG_RATE_QUAD 0x40 #define PLL_TX_CFG_BUSWIDTH 0x0000001c #define PLL_TX_CFG_BUSWIDTH_SHIFT 2 #define PLL_TX_CFG_ENTEST 0x00000002 @@ -1132,6 +1142,9 @@ #define PLL_RX_CFG_INVPAIR 0x00000080 #define PLL_RX_CFG_RATE 0x00000060 #define PLL_RX_CFG_RATE_SHIFT 5 +#define PLL_RX_CFG_RATE_FULL 0x0 +#define PLL_RX_CFG_RATE_HALF 0x20 +#define PLL_RX_CFG_RATE_QUAD 0x40 #define PLL_RX_CFG_BUSWIDTH 0x0000001c #define PLL_RX_CFG_BUSWIDTH_SHIFT 2 #define PLL_RX_CFG_ENTEST 0x00000002 -- cgit v1.2.2 From d8c3e23d06c1020f38b7b6290135a9522a2e3052 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 14 Nov 2008 14:47:29 -0800 Subject: niu: Bump driver version and release date. This driver is pretty mature, and the worst of the known problems has been fixed (the 32-bit failures due to readq implementation). So let's finally give it a version of 1.0 Signed-off-by: David S. Miller --- drivers/net/niu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/niu.c b/drivers/net/niu.c index be6b4d7e2bb4..1b6f548c4411 100644 --- a/drivers/net/niu.c +++ b/drivers/net/niu.c @@ -33,8 +33,8 @@ #define DRV_MODULE_NAME "niu" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "0.9" -#define DRV_MODULE_RELDATE "May 4, 2008" +#define DRV_MODULE_VERSION "1.0" +#define DRV_MODULE_RELDATE "Nov 14, 2008" static char version[] __devinitdata = DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n"; -- cgit v1.2.2 From 18acfa2597d57c19249346d130fc3334244557b4 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 13 Nov 2008 21:26:27 +0300 Subject: net/ucc_geth: Fix oops in uec_get_ethtool_stats() p_{tx,rx}_fw_statistics_pram are special: they're available only when a device is open. If the device is closed, we should just fill the data with zeroes. Fixes the following oops: root@b1:~# ifconfig eth1 down root@b1:~# ethtool -S eth1 Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xc01e1dcc Oops: Kernel access of bad area, sig: 11 [#1] [...] NIP [c01e1dcc] uec_get_ethtool_stats+0x98/0x124 LR [c0287cc8] ethtool_get_stats+0xfc/0x23c Call Trace: [cfaadde0] [c0287ca8] ethtool_get_stats+0xdc/0x23c (unreliable) [cfaade20] [c0288340] dev_ethtool+0x2fc/0x588 [cfaade50] [c0285648] dev_ioctl+0x290/0x33c [cfaadea0] [c0272238] sock_ioctl+0x80/0x2ec [cfaadec0] [c00b5ae4] vfs_ioctl+0x40/0xc0 [cfaadee0] [c00b5fa8] do_vfs_ioctl+0x78/0x20c [cfaadf10] [c00b617c] sys_ioctl+0x40/0x74 [cfaadf40] [c00142d8] ret_from_syscall+0x0/0x38 [...] ---[ end trace b941007b2dfb9759 ]--- Segmentation fault p.s. While at it, also remove u64 casts, they aren't needed. Signed-off-by: Anton Vorontsov Signed-off-by: Jeff Garzik --- drivers/net/ucc_geth_ethtool.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ucc_geth_ethtool.c index 85f38a6b6a49..68a7f5414133 100644 --- a/drivers/net/ucc_geth_ethtool.c +++ b/drivers/net/ucc_geth_ethtool.c @@ -323,17 +323,17 @@ static void uec_get_ethtool_stats(struct net_device *netdev, if (stats_mode & UCC_GETH_STATISTICS_GATHERING_MODE_HARDWARE) { base = (u32 __iomem *)&ugeth->ug_regs->tx64; for (i = 0; i < UEC_HW_STATS_LEN; i++) - data[j++] = (u64)in_be32(&base[i]); + data[j++] = in_be32(&base[i]); } if (stats_mode & UCC_GETH_STATISTICS_GATHERING_MODE_FIRMWARE_TX) { base = (u32 __iomem *)ugeth->p_tx_fw_statistics_pram; for (i = 0; i < UEC_TX_FW_STATS_LEN; i++) - data[j++] = (u64)in_be32(&base[i]); + data[j++] = base ? in_be32(&base[i]) : 0; } if (stats_mode & UCC_GETH_STATISTICS_GATHERING_MODE_FIRMWARE_RX) { base = (u32 __iomem *)ugeth->p_rx_fw_statistics_pram; for (i = 0; i < UEC_RX_FW_STATS_LEN; i++) - data[j++] = (u64)in_be32(&base[i]); + data[j++] = base ? in_be32(&base[i]) : 0; } } -- cgit v1.2.2 From 81183059e89c36f9b4c41f9332d642c2e0bff971 Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Wed, 12 Nov 2008 10:07:11 -0600 Subject: gianfar: Fix DMA unmap invocations We weren't unmapping DMA memory, which will break when gianfar gets used on systems with more than 32-bits of memory. Also, it's just plain wrong. Signed-off-by: Andy Fleming Signed-off-by: Jeff Garzik --- drivers/net/gianfar.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 83a5cb6aa23b..c4af949bf860 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -1407,6 +1407,10 @@ static int gfar_clean_tx_ring(struct net_device *dev) if (bdp->status & TXBD_DEF) dev->stats.collisions++; + /* Unmap the DMA memory */ + dma_unmap_single(&priv->dev->dev, bdp->bufPtr, + bdp->length, DMA_TO_DEVICE); + /* Free the sk buffer associated with this TxBD */ dev_kfree_skb_irq(priv->tx_skbuff[priv->skb_dirtytx]); @@ -1666,6 +1670,9 @@ int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit) skb = priv->rx_skbuff[priv->skb_currx]; + dma_unmap_single(&priv->dev->dev, bdp->bufPtr, + priv->rx_buffer_size, DMA_FROM_DEVICE); + /* We drop the frame if we failed to allocate a new buffer */ if (unlikely(!newskb || !(bdp->status & RXBD_LAST) || bdp->status & RXBD_ERR)) { @@ -1674,14 +1681,8 @@ int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit) if (unlikely(!newskb)) newskb = skb; - if (skb) { - dma_unmap_single(&priv->dev->dev, - bdp->bufPtr, - priv->rx_buffer_size, - DMA_FROM_DEVICE); - + if (skb) dev_kfree_skb_any(skb); - } } else { /* Increment the number of packets */ dev->stats.rx_packets++; -- cgit v1.2.2 From 7ee0fddfe05f105d3346aa8774695e7130697836 Mon Sep 17 00:00:00 2001 From: "J. K. Cliburn" Date: Tue, 11 Nov 2008 16:21:48 -0600 Subject: atl1e: fix broken multicast by removing unnecessary crc inversion Inverting the crc after calling ether_crc_le() is unnecessary and breaks multicast. Remove it. Tested-by: David Madore Signed-off-by: Jay Cliburn Cc: stable@kernel.org Signed-off-by: Jeff Garzik --- drivers/net/atl1e/atl1e_hw.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/atl1e/atl1e_hw.c b/drivers/net/atl1e/atl1e_hw.c index 8cbc1b59bd62..4a7700620119 100644 --- a/drivers/net/atl1e/atl1e_hw.c +++ b/drivers/net/atl1e/atl1e_hw.c @@ -163,9 +163,6 @@ int atl1e_read_mac_addr(struct atl1e_hw *hw) * atl1e_hash_mc_addr * purpose * set hash value for a multicast address - * hash calcu processing : - * 1. calcu 32bit CRC for multicast address - * 2. reverse crc with MSB to LSB */ u32 atl1e_hash_mc_addr(struct atl1e_hw *hw, u8 *mc_addr) { @@ -174,7 +171,6 @@ u32 atl1e_hash_mc_addr(struct atl1e_hw *hw, u8 *mc_addr) int i; crc32 = ether_crc_le(6, mc_addr); - crc32 = ~crc32; for (i = 0; i < 32; i++) value |= (((crc32 >> i) & 1) << (31 - i)); -- cgit v1.2.2 From 3b259e365998291a02488225e32b9f2b73723b3e Mon Sep 17 00:00:00 2001 From: "J. K. Cliburn" Date: Sun, 9 Nov 2008 15:05:30 -0600 Subject: atl1: Do not enumerate options unsupported by chip Of the various WOL options provided in include/linux/ethtool.h, the L1 NIC supports only magic packet. Remove all options except magic packet from the atl1 driver. Signed-off-by: Jay Cliburn Signed-off-by: Jeff Garzik --- drivers/net/atlx/atl1.c | 17 +++-------------- 1 file changed, 3 insertions(+), 14 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c index 246d92b42636..aef403d299ee 100644 --- a/drivers/net/atlx/atl1.c +++ b/drivers/net/atlx/atl1.c @@ -3404,14 +3404,8 @@ static void atl1_get_wol(struct net_device *netdev, { struct atl1_adapter *adapter = netdev_priv(netdev); - wol->supported = WAKE_UCAST | WAKE_MCAST | WAKE_BCAST | WAKE_MAGIC; + wol->supported = WAKE_MAGIC; wol->wolopts = 0; - if (adapter->wol & ATLX_WUFC_EX) - wol->wolopts |= WAKE_UCAST; - if (adapter->wol & ATLX_WUFC_MC) - wol->wolopts |= WAKE_MCAST; - if (adapter->wol & ATLX_WUFC_BC) - wol->wolopts |= WAKE_BCAST; if (adapter->wol & ATLX_WUFC_MAG) wol->wolopts |= WAKE_MAGIC; return; @@ -3422,15 +3416,10 @@ static int atl1_set_wol(struct net_device *netdev, { struct atl1_adapter *adapter = netdev_priv(netdev); - if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE)) + if (wol->wolopts & (WAKE_PHY | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST | + WAKE_ARP | WAKE_MAGICSECURE)) return -EOPNOTSUPP; adapter->wol = 0; - if (wol->wolopts & WAKE_UCAST) - adapter->wol |= ATLX_WUFC_EX; - if (wol->wolopts & WAKE_MCAST) - adapter->wol |= ATLX_WUFC_MC; - if (wol->wolopts & WAKE_BCAST) - adapter->wol |= ATLX_WUFC_BC; if (wol->wolopts & WAKE_MAGIC) adapter->wol |= ATLX_WUFC_MAG; return 0; -- cgit v1.2.2 From 3e44017b589f001941723dfdfede2ca6284dddce Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Sun, 9 Nov 2008 05:34:47 +0100 Subject: phylib: fix premature freeing of struct mii_bus Commit 46abc02175b3c246dd5141d878f565a8725060c9 ("phylib: give mdio buses a device tree presence") added a call to device_unregister() in a situation where the caller did not intend for the device to be freed yet, but apart from just unregistering the device from the system, device_unregister() does an additional put_device() that is intended to free it. The right function to use in this situation is device_del(), which unregisters the device from the system like device_unregister() does, but without dropping the reference count an additional time. Bug report from Bryan Wu . Signed-off-by: Lennert Buytenhek Tested-by: Bryan Wu Signed-off-by: Jeff Garzik --- drivers/net/phy/mdio_bus.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index d0ed1ef284a8..536bda1f428b 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -136,7 +136,7 @@ void mdiobus_unregister(struct mii_bus *bus) BUG_ON(bus->state != MDIOBUS_REGISTERED); bus->state = MDIOBUS_UNREGISTERED; - device_unregister(&bus->dev); + device_del(&bus->dev); for (i = 0; i < PHY_MAX_ADDR; i++) { if (bus->phy_map[i]) device_unregister(&bus->phy_map[i]->dev); -- cgit v1.2.2 From d53b93f2603554c3420e301bd13ee2c354a15ceb Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Wed, 5 Nov 2008 04:48:36 +0000 Subject: mlx4_en: Pause parameters per port Before the change the driver reported the same pause parameters for all the ports, even only one of them was modified. Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller --- drivers/net/mlx4/en_netdev.c | 8 ++++---- drivers/net/mlx4/en_params.c | 30 ++++++++++++++++-------------- drivers/net/mlx4/mlx4_en.h | 8 ++++---- 3 files changed, 24 insertions(+), 22 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/mlx4/en_netdev.c b/drivers/net/mlx4/en_netdev.c index a3f732418c49..96e709d6440a 100644 --- a/drivers/net/mlx4/en_netdev.c +++ b/drivers/net/mlx4/en_netdev.c @@ -656,10 +656,10 @@ static int mlx4_en_start_port(struct net_device *dev) /* Configure port */ err = mlx4_SET_PORT_general(mdev->dev, priv->port, priv->rx_skb_size + ETH_FCS_LEN, - mdev->profile.tx_pause, - mdev->profile.tx_ppp, - mdev->profile.rx_pause, - mdev->profile.rx_ppp); + priv->prof->tx_pause, + priv->prof->tx_ppp, + priv->prof->rx_pause, + priv->prof->rx_ppp); if (err) { mlx4_err(mdev, "Failed setting port general configurations" " for port %d, with error %d\n", priv->port, err); diff --git a/drivers/net/mlx4/en_params.c b/drivers/net/mlx4/en_params.c index c2e69b1bcd0a..95706ee1c019 100644 --- a/drivers/net/mlx4/en_params.c +++ b/drivers/net/mlx4/en_params.c @@ -90,6 +90,7 @@ MLX4_EN_PARM_INT(rx_ring_size2, MLX4_EN_AUTO_CONF, "Rx ring size for port 2"); int mlx4_en_get_profile(struct mlx4_en_dev *mdev) { struct mlx4_en_profile *params = &mdev->profile; + int i; params->rx_moder_cnt = min_t(int, rx_moder_cnt, MLX4_EN_AUTO_CONF); params->rx_moder_time = min_t(int, rx_moder_time, MLX4_EN_AUTO_CONF); @@ -97,11 +98,13 @@ int mlx4_en_get_profile(struct mlx4_en_dev *mdev) params->rss_xor = (rss_xor != 0); params->rss_mask = rss_mask & 0x1f; params->num_lro = min_t(int, num_lro , MLX4_EN_MAX_LRO_DESCRIPTORS); - params->rx_pause = pprx; - params->rx_ppp = pfcrx; - params->tx_pause = pptx; - params->tx_ppp = pfctx; - if (params->rx_ppp || params->tx_ppp) { + for (i = 1; i <= MLX4_MAX_PORTS; i++) { + params->prof[i].rx_pause = pprx; + params->prof[i].rx_ppp = pfcrx; + params->prof[i].tx_pause = pptx; + params->prof[i].tx_ppp = pfctx; + } + if (pfcrx || pfctx) { params->prof[1].tx_ring_num = MLX4_EN_TX_RING_NUM; params->prof[2].tx_ring_num = MLX4_EN_TX_RING_NUM; } else { @@ -407,14 +410,14 @@ static int mlx4_en_set_pauseparam(struct net_device *dev, struct mlx4_en_dev *mdev = priv->mdev; int err; - mdev->profile.tx_pause = pause->tx_pause != 0; - mdev->profile.rx_pause = pause->rx_pause != 0; + priv->prof->tx_pause = pause->tx_pause != 0; + priv->prof->rx_pause = pause->rx_pause != 0; err = mlx4_SET_PORT_general(mdev->dev, priv->port, priv->rx_skb_size + ETH_FCS_LEN, - mdev->profile.tx_pause, - mdev->profile.tx_ppp, - mdev->profile.rx_pause, - mdev->profile.rx_ppp); + priv->prof->tx_pause, + priv->prof->tx_ppp, + priv->prof->rx_pause, + priv->prof->rx_ppp); if (err) mlx4_err(mdev, "Failed setting pause params to\n"); @@ -425,10 +428,9 @@ static void mlx4_en_get_pauseparam(struct net_device *dev, struct ethtool_pauseparam *pause) { struct mlx4_en_priv *priv = netdev_priv(dev); - struct mlx4_en_dev *mdev = priv->mdev; - pause->tx_pause = mdev->profile.tx_pause; - pause->rx_pause = mdev->profile.rx_pause; + pause->tx_pause = priv->prof->tx_pause; + pause->rx_pause = priv->prof->rx_pause; } static void mlx4_en_get_ringparam(struct net_device *dev, diff --git a/drivers/net/mlx4/mlx4_en.h b/drivers/net/mlx4/mlx4_en.h index 11fb17c6e97b..98ddc0811f93 100644 --- a/drivers/net/mlx4/mlx4_en.h +++ b/drivers/net/mlx4/mlx4_en.h @@ -322,6 +322,10 @@ struct mlx4_en_port_profile { u32 rx_ring_num; u32 tx_ring_size; u32 rx_ring_size; + u8 rx_pause; + u8 rx_ppp; + u8 tx_pause; + u8 tx_ppp; }; struct mlx4_en_profile { @@ -333,10 +337,6 @@ struct mlx4_en_profile { int rx_moder_cnt; int rx_moder_time; int auto_moder; - u8 rx_pause; - u8 rx_ppp; - u8 tx_pause; - u8 tx_ppp; u8 no_reset; struct mlx4_en_port_profile prof[MLX4_MAX_PORTS + 1]; }; -- cgit v1.2.2 From 605f196efbf8dcbb3581e76ddd0573899dffcf1f Mon Sep 17 00:00:00 2001 From: Ron Madrid Date: Thu, 6 Nov 2008 09:05:26 +0000 Subject: phy: Add support for Marvell 88E1118 PHY This patch will add support for the Marvell 88E1118 PHY which supports gigabit ethernet among other things. Signed-off-by: Ron Madrid Signed-off-by: David S. Miller --- drivers/net/phy/marvell.c | 66 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 66 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index 4aa547947040..eb6411c4694f 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -227,6 +227,59 @@ static int m88e1111_config_init(struct phy_device *phydev) return 0; } +static int m88e1118_config_aneg(struct phy_device *phydev) +{ + int err; + + err = phy_write(phydev, MII_BMCR, BMCR_RESET); + if (err < 0) + return err; + + err = phy_write(phydev, MII_M1011_PHY_SCR, + MII_M1011_PHY_SCR_AUTO_CROSS); + if (err < 0) + return err; + + err = genphy_config_aneg(phydev); + return 0; +} + +static int m88e1118_config_init(struct phy_device *phydev) +{ + int err; + + /* Change address */ + err = phy_write(phydev, 0x16, 0x0002); + if (err < 0) + return err; + + /* Enable 1000 Mbit */ + err = phy_write(phydev, 0x15, 0x1070); + if (err < 0) + return err; + + /* Change address */ + err = phy_write(phydev, 0x16, 0x0003); + if (err < 0) + return err; + + /* Adjust LED Control */ + err = phy_write(phydev, 0x10, 0x021e); + if (err < 0) + return err; + + /* Reset address */ + err = phy_write(phydev, 0x16, 0x0); + if (err < 0) + return err; + + err = phy_write(phydev, MII_BMCR, BMCR_RESET); + if (err < 0) + return err; + + return 0; +} + static int m88e1145_config_init(struct phy_device *phydev) { int err; @@ -415,6 +468,19 @@ static struct phy_driver marvell_drivers[] = { .config_intr = &marvell_config_intr, .driver = { .owner = THIS_MODULE }, }, + { + .phy_id = 0x01410e10, + .phy_id_mask = 0xfffffff0, + .name = "Marvell 88E1118", + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_init = &m88e1118_config_init, + .config_aneg = &m88e1118_config_aneg, + .read_status = &genphy_read_status, + .ack_interrupt = &marvell_ack_interrupt, + .config_intr = &marvell_config_intr, + .driver = {.owner = THIS_MODULE,}, + }, { .phy_id = 0x01410cd0, .phy_id_mask = 0xfffffff0, -- cgit v1.2.2 From 5f5c4bdb144bf285727867bbd75c13c5a99150c9 Mon Sep 17 00:00:00 2001 From: Joey Zhuo Date: Sun, 16 Nov 2008 00:39:35 -0800 Subject: via-velocity: enable perfect filtering for multicast packets Signed-off-by: Joey Zhuo Acked-by: Francois Romieu Signed-off-by: David S. Miller --- drivers/net/via-velocity.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c index 3590ea5a902d..11cb3e504e1c 100644 --- a/drivers/net/via-velocity.c +++ b/drivers/net/via-velocity.c @@ -2296,7 +2296,7 @@ static void velocity_set_multi(struct net_device *dev) } mac_set_cam_mask(regs, vptr->mCAMmask); - rx_mode = (RCR_AM | RCR_AB); + rx_mode = RCR_AM | RCR_AB | RCR_AP; } if (dev->mtu > 1500) rx_mode |= RCR_AL; -- cgit v1.2.2 From 6ff68026f4757d68461b7fbeca5c944e1f5f8b44 Mon Sep 17 00:00:00 2001 From: "\\\"Rafael J. Wysocki\\" Date: Wed, 12 Nov 2008 09:52:32 +0000 Subject: e1000e: Use device_set_wakeup_enable Since dev->power.should_wakeup bit is used by the PCI core to decide whether the device should wake up the system from sleep states, set/unset this bit whenever WOL is enabled/disabled using e1000_set_wol(). Accordingly, use device_can_wakeup() for checking if wake-up is supported by the device. Signed-off-by: "Rafael J. Wysocki" Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/ethtool.c | 8 ++++++-- drivers/net/e1000e/netdev.c | 1 + 2 files changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c index 70c11c811a08..62421ce96311 100644 --- a/drivers/net/e1000e/ethtool.c +++ b/drivers/net/e1000e/ethtool.c @@ -1713,7 +1713,8 @@ static void e1000_get_wol(struct net_device *netdev, wol->supported = 0; wol->wolopts = 0; - if (!(adapter->flags & FLAG_HAS_WOL)) + if (!(adapter->flags & FLAG_HAS_WOL) || + !device_can_wakeup(&adapter->pdev->dev)) return; wol->supported = WAKE_UCAST | WAKE_MCAST | @@ -1751,7 +1752,8 @@ static int e1000_set_wol(struct net_device *netdev, if (wol->wolopts & WAKE_MAGICSECURE) return -EOPNOTSUPP; - if (!(adapter->flags & FLAG_HAS_WOL)) + if (!(adapter->flags & FLAG_HAS_WOL) || + !device_can_wakeup(&adapter->pdev->dev)) return wol->wolopts ? -EOPNOTSUPP : 0; /* these settings will always override what we currently have */ @@ -1770,6 +1772,8 @@ static int e1000_set_wol(struct net_device *netdev, if (wol->wolopts & WAKE_ARP) adapter->wol |= E1000_WUFC_ARP; + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); + return 0; } diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index abd492b7336d..2c8dffdc889f 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -4970,6 +4970,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, /* initialize the wol settings based on the eeprom settings */ adapter->wol = adapter->eeprom_wol; + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); /* reset the hardware with the new settings */ e1000e_reset(adapter); -- cgit v1.2.2 From de1264896c8012a261c1cba17e6a61199c276ad3 Mon Sep 17 00:00:00 2001 From: "\\\"Rafael J. Wysocki\\" Date: Fri, 7 Nov 2008 20:30:19 +0000 Subject: e1000: Use device_set_wakeup_enable Since dev->power.should_wakeup bit is used by the PCI core to decide whether the device should wake up the system from sleep states, set/unset this bit whenever WOL is enabled/disabled using e1000_set_wol(). Accordingly, use device_can_wakeup() for checking if wake-up is supported by the device. Signed-off-by: "Rafael J. Wysocki" Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000/e1000_ethtool.c | 8 ++++++-- drivers/net/e1000/e1000_main.c | 1 + 2 files changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index 6a3893acfe04..c854c96f5ab3 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -1774,7 +1774,8 @@ static void e1000_get_wol(struct net_device *netdev, /* this function will set ->supported = 0 and return 1 if wol is not * supported by this hardware */ - if (e1000_wol_exclusion(adapter, wol)) + if (e1000_wol_exclusion(adapter, wol) || + !device_can_wakeup(&adapter->pdev->dev)) return; /* apply any specific unsupported masks here */ @@ -1811,7 +1812,8 @@ static int e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE)) return -EOPNOTSUPP; - if (e1000_wol_exclusion(adapter, wol)) + if (e1000_wol_exclusion(adapter, wol) || + !device_can_wakeup(&adapter->pdev->dev)) return wol->wolopts ? -EOPNOTSUPP : 0; switch (hw->device_id) { @@ -1838,6 +1840,8 @@ static int e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) if (wol->wolopts & WAKE_MAGIC) adapter->wol |= E1000_WUFC_MAG; + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); + return 0; } diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index fac82152e4c8..872799b746f5 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -1179,6 +1179,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, /* initialize the wol settings based on the eeprom settings */ adapter->wol = adapter->eeprom_wol; + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); /* print bus type/speed/width info */ DPRINTK(PROBE, INFO, "(PCI%s:%s:%s) ", -- cgit v1.2.2 From e1b86d8479f90aadee57a3d07d8e61c815c202d9 Mon Sep 17 00:00:00 2001 From: "\\\"Rafael J. Wysocki\\" Date: Fri, 7 Nov 2008 20:30:37 +0000 Subject: igb: Use device_set_wakeup_enable Since dev->power.should_wakeup bit is used by the PCI core to decide whether the device should wake up the system from sleep states, set/unset this bit whenever WOL is enabled/disabled using igb_set_wol(). Accordingly, use device_can_wakeup() for checking if wake-up is supported by the device. Signed-off-by: "Rafael J. Wysocki" Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/igb/igb_ethtool.c | 8 ++++++-- drivers/net/igb/igb_main.c | 1 + 2 files changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c index 58906c984be9..89964fa739a0 100644 --- a/drivers/net/igb/igb_ethtool.c +++ b/drivers/net/igb/igb_ethtool.c @@ -1776,7 +1776,8 @@ static void igb_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) /* this function will set ->supported = 0 and return 1 if wol is not * supported by this hardware */ - if (igb_wol_exclusion(adapter, wol)) + if (igb_wol_exclusion(adapter, wol) || + !device_can_wakeup(&adapter->pdev->dev)) return; /* apply any specific unsupported masks here */ @@ -1805,7 +1806,8 @@ static int igb_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE)) return -EOPNOTSUPP; - if (igb_wol_exclusion(adapter, wol)) + if (igb_wol_exclusion(adapter, wol) || + !device_can_wakeup(&adapter->pdev->dev)) return wol->wolopts ? -EOPNOTSUPP : 0; switch (hw->device_id) { @@ -1825,6 +1827,8 @@ static int igb_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) if (wol->wolopts & WAKE_MAGIC) adapter->wol |= E1000_WUFC_MAG; + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); + return 0; } diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index 1f397cd99414..0a9801516ae0 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -1244,6 +1244,7 @@ static int __devinit igb_probe(struct pci_dev *pdev, /* initialize the wol settings based on the eeprom settings */ adapter->wol = adapter->eeprom_wol; + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); /* reset the hardware with the new settings */ igb_reset(adapter); -- cgit v1.2.2 From 0f807044980dd51fdf9aa2df8d503d4757501b20 Mon Sep 17 00:00:00 2001 From: Ron Mercer Date: Tue, 11 Nov 2008 07:54:54 +0000 Subject: qla3xxx: Cleanup: Fix link print statements. Removed debug print statements and improved conditionals around informational statements. Signed-off-by: Ron Mercer Signed-off-by: David S. Miller --- drivers/net/qla3xxx.c | 19 +++++-------------- 1 file changed, 5 insertions(+), 14 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c index 3cdd07c45b6d..508452c02151 100644 --- a/drivers/net/qla3xxx.c +++ b/drivers/net/qla3xxx.c @@ -1515,9 +1515,6 @@ static u32 ql_get_link_state(struct ql3_adapter *qdev) linkState = LS_UP; } else { linkState = LS_DOWN; - if (netif_msg_link(qdev)) - printk(KERN_WARNING PFX - "%s: Link is down.\n", qdev->ndev->name); } return linkState; } @@ -1581,10 +1578,6 @@ static int ql_finish_auto_neg(struct ql3_adapter *qdev) ql_mac_enable(qdev, 1); } - if (netif_msg_link(qdev)) - printk(KERN_DEBUG PFX - "%s: Change port_link_state LS_DOWN to LS_UP.\n", - qdev->ndev->name); qdev->port_link_state = LS_UP; netif_start_queue(qdev->ndev); netif_carrier_on(qdev->ndev); @@ -1655,14 +1648,9 @@ static void ql_link_state_machine_work(struct work_struct *work) /* Fall Through */ case LS_DOWN: - if (netif_msg_link(qdev)) - printk(KERN_DEBUG PFX - "%s: port_link_state = LS_DOWN.\n", - qdev->ndev->name); if (curr_link_state == LS_UP) { if (netif_msg_link(qdev)) - printk(KERN_DEBUG PFX - "%s: curr_link_state = LS_UP.\n", + printk(KERN_INFO PFX "%s: Link is up.\n", qdev->ndev->name); if (ql_is_auto_neg_complete(qdev)) ql_finish_auto_neg(qdev); @@ -1670,6 +1658,7 @@ static void ql_link_state_machine_work(struct work_struct *work) if (qdev->port_link_state == LS_UP) ql_link_down_detect_clear(qdev); + qdev->port_link_state = LS_UP; } break; @@ -1678,12 +1667,14 @@ static void ql_link_state_machine_work(struct work_struct *work) * See if the link is currently down or went down and came * back up */ - if ((curr_link_state == LS_DOWN) || ql_link_down_detect(qdev)) { + if (curr_link_state == LS_DOWN) { if (netif_msg_link(qdev)) printk(KERN_INFO PFX "%s: Link is down.\n", qdev->ndev->name); qdev->port_link_state = LS_DOWN; } + if (ql_link_down_detect(qdev)) + qdev->port_link_state = LS_DOWN; break; } spin_unlock_irqrestore(&qdev->hw_lock, hw_flags); -- cgit v1.2.2 From ac450208dea8cf1b9aa8feabd06a7209a282d749 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 13 Nov 2008 06:20:10 +0000 Subject: igb: use dev_printk instead of printk Use dev_printk() instead of printk() to give a little more context and use consistent format. Signed-off-by: Bjorn Helgaas Signed-off-by: David S. Miller --- drivers/net/igb/igb_main.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index 0a9801516ae0..1cbae85b1426 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -1019,10 +1019,9 @@ static int __devinit igb_probe(struct pci_dev *pdev, state &= ~PCIE_LINK_STATE_L0S; pci_write_config_word(us_dev, pos + PCI_EXP_LNKCTL, state); - printk(KERN_INFO "Disabling ASPM L0s upstream switch " - "port %x:%x.%x\n", us_dev->bus->number, - PCI_SLOT(us_dev->devfn), - PCI_FUNC(us_dev->devfn)); + dev_info(&pdev->dev, + "Disabling ASPM L0s upstream switch port %s\n", + pci_name(us_dev)); } default: break; -- cgit v1.2.2 From 773c9c1f77174429ad2feb1735a3beb33ff3b6c0 Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Fri, 14 Nov 2008 13:51:54 +0000 Subject: e100: fix dma error in direction for mapping The e100 driver triggers BUG_ON(buf->direction != dir) by doing pci_map_single(..., PCI_DMA_BIDIRECTIONAL) and pci_dma_sync_single_for_device(..., PCI_DMA_TODEVICE). Changing the DMA direction, especially with dmabounce will result in unexpected behaviour. Reported-by: Anders Grafstrom Signed-off-by: Jesse Brandeburg Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e100.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e100.c b/drivers/net/e100.c index 3d69fae781cf..e8bfcce6b319 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -166,7 +166,7 @@ #define DRV_NAME "e100" #define DRV_EXT "-NAPI" -#define DRV_VERSION "3.5.23-k4"DRV_EXT +#define DRV_VERSION "3.5.23-k6"DRV_EXT #define DRV_DESCRIPTION "Intel(R) PRO/100 Network Driver" #define DRV_COPYRIGHT "Copyright(c) 1999-2006 Intel Corporation" #define PFX DRV_NAME ": " @@ -1804,7 +1804,7 @@ static int e100_rx_alloc_skb(struct nic *nic, struct rx *rx) struct rfd *prev_rfd = (struct rfd *)rx->prev->skb->data; put_unaligned_le32(rx->dma_addr, &prev_rfd->link); pci_dma_sync_single_for_device(nic->pdev, rx->prev->dma_addr, - sizeof(struct rfd), PCI_DMA_TODEVICE); + sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL); } return 0; @@ -1823,7 +1823,7 @@ static int e100_rx_indicate(struct nic *nic, struct rx *rx, /* Need to sync before taking a peek at cb_complete bit */ pci_dma_sync_single_for_cpu(nic->pdev, rx->dma_addr, - sizeof(struct rfd), PCI_DMA_FROMDEVICE); + sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL); rfd_status = le16_to_cpu(rfd->status); DPRINTK(RX_STATUS, DEBUG, "status=0x%04X\n", rfd_status); @@ -1850,7 +1850,7 @@ static int e100_rx_indicate(struct nic *nic, struct rx *rx, /* Get data */ pci_unmap_single(nic->pdev, rx->dma_addr, - RFD_BUF_LEN, PCI_DMA_FROMDEVICE); + RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL); /* If this buffer has the el bit, but we think the receiver * is still running, check to see if it really stopped while @@ -1943,7 +1943,7 @@ static void e100_rx_clean(struct nic *nic, unsigned int *work_done, new_before_last_rfd->command |= cpu_to_le16(cb_el); pci_dma_sync_single_for_device(nic->pdev, new_before_last_rx->dma_addr, sizeof(struct rfd), - PCI_DMA_TODEVICE); + PCI_DMA_BIDIRECTIONAL); /* Now that we have a new stopping point, we can clear the old * stopping point. We must sync twice to get the proper @@ -1951,11 +1951,11 @@ static void e100_rx_clean(struct nic *nic, unsigned int *work_done, old_before_last_rfd->command &= ~cpu_to_le16(cb_el); pci_dma_sync_single_for_device(nic->pdev, old_before_last_rx->dma_addr, sizeof(struct rfd), - PCI_DMA_TODEVICE); + PCI_DMA_BIDIRECTIONAL); old_before_last_rfd->size = cpu_to_le16(VLAN_ETH_FRAME_LEN); pci_dma_sync_single_for_device(nic->pdev, old_before_last_rx->dma_addr, sizeof(struct rfd), - PCI_DMA_TODEVICE); + PCI_DMA_BIDIRECTIONAL); } if(restart_required) { @@ -1978,7 +1978,7 @@ static void e100_rx_clean_list(struct nic *nic) for(rx = nic->rxs, i = 0; i < count; rx++, i++) { if(rx->skb) { pci_unmap_single(nic->pdev, rx->dma_addr, - RFD_BUF_LEN, PCI_DMA_FROMDEVICE); + RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL); dev_kfree_skb(rx->skb); } } @@ -2021,7 +2021,7 @@ static int e100_rx_alloc_list(struct nic *nic) before_last->command |= cpu_to_le16(cb_el); before_last->size = 0; pci_dma_sync_single_for_device(nic->pdev, rx->dma_addr, - sizeof(struct rfd), PCI_DMA_TODEVICE); + sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL); nic->rx_to_use = nic->rx_to_clean = nic->rxs; nic->ru_running = RU_SUSPENDED; @@ -2222,7 +2222,7 @@ static int e100_loopback_test(struct nic *nic, enum loopback loopback_mode) msleep(10); pci_dma_sync_single_for_cpu(nic->pdev, nic->rx_to_clean->dma_addr, - RFD_BUF_LEN, PCI_DMA_FROMDEVICE); + RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL); if(memcmp(nic->rx_to_clean->skb->data + sizeof(struct rfd), skb->data, ETH_DATA_LEN)) -- cgit v1.2.2 From 3ee82383f0098a2e13acc8cf1be8e47512f41e5a Mon Sep 17 00:00:00 2001 From: Giulio Benetti Date: Thu, 13 Nov 2008 21:53:13 +0000 Subject: phy: fix phy address bug PHYID returns 0xffff and not 0xffffffff when not found and in some case(at91sam9263) 0x0. Maybe this patch could be useful. Signed-off-by: Giulio Benetti Signed-off-by: David S. Miller --- drivers/net/phy/phy_device.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index e11b03b2b25a..8fb1faca883a 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -227,8 +227,8 @@ struct phy_device * get_phy_device(struct mii_bus *bus, int addr) if (r) return ERR_PTR(r); - /* If the phy_id is all Fs, there is no device there */ - if (0xffffffff == phy_id) + /* If the phy_id is all Fs or all 0s, there is no device there */ + if ((0xffff == phy_id) || (0x00 == phy_id)) return NULL; dev = phy_device_create(bus, addr, phy_id); -- cgit v1.2.2 From e82f54ba030b429c06b5240cbe7eeaaa03a8db11 Mon Sep 17 00:00:00 2001 From: Jeff Kirsher Date: Fri, 14 Nov 2008 06:45:07 +0000 Subject: e1000e: fix warn_on reload after phy_id error If the driver fails to initialize the first time due to the failure in the phy_id check the kernel triggers a warn_on on the second try to load the driver because the driver did not free the msi/x resources in the first load because of the previous failure in phy_id check. Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/netdev.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 2c8dffdc889f..f6ebebb8cfa5 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -5009,6 +5009,7 @@ err_hw_init: err_sw_init: if (adapter->hw.flash_address) iounmap(adapter->hw.flash_address); + e1000e_reset_interrupt_capability(adapter); err_flashmap: iounmap(adapter->hw.hw_addr); err_ioremap: -- cgit v1.2.2 From eb7c3adb1ca92450870dbb0d347fc986cd5e2af4 Mon Sep 17 00:00:00 2001 From: Jeff Kirsher Date: Fri, 14 Nov 2008 06:45:23 +0000 Subject: e1000e: fix IPMI traffic Some users reported that they have machines with BMCs enabled that cannot receive IPMI traffic after e1000e is loaded. http://marc.info/?l=e1000-devel&m=121909039127414&w=2 http://marc.info/?l=e1000-devel&m=121365543823387&w=2 This fixes the issue if they load with the new parameter = 0 by disabling crc stripping, but leaves the performance feature on for most users. Based on work done by Hong Zhang. Signed-off-by: Jeff Kirsher Signed-off-by: Jesse Brandeburg Signed-off-by: David S. Miller --- drivers/net/e1000e/e1000.h | 5 +++++ drivers/net/e1000e/netdev.c | 23 +++++++++++++++++++++-- drivers/net/e1000e/param.c | 25 +++++++++++++++++++++++++ 3 files changed, 51 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index c55de1c027af..c55fd6fdb91c 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -299,6 +299,7 @@ struct e1000_adapter { unsigned long led_status; unsigned int flags; + unsigned int flags2; struct work_struct downshift_task; struct work_struct update_phy_task; }; @@ -306,6 +307,7 @@ struct e1000_adapter { struct e1000_info { enum e1000_mac_type mac; unsigned int flags; + unsigned int flags2; u32 pba; s32 (*get_variants)(struct e1000_adapter *); struct e1000_mac_operations *mac_ops; @@ -347,6 +349,9 @@ struct e1000_info { #define FLAG_RX_RESTART_NOW (1 << 30) #define FLAG_MSI_TEST_FAILED (1 << 31) +/* CRC Stripping defines */ +#define FLAG2_CRC_STRIPPING (1 << 0) + #define E1000_RX_DESC_PS(R, i) \ (&(((union e1000_rx_desc_packet_split *)((R).desc))[i])) #define E1000_GET_DESC(R, i, type) (&(((struct type *)((R).desc))[i])) diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index f6ebebb8cfa5..91795f78c3e4 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -499,6 +499,10 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, goto next_desc; } + /* adjust length to remove Ethernet CRC */ + if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) + length -= 4; + total_rx_bytes += length; total_rx_packets++; @@ -804,6 +808,10 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, pci_dma_sync_single_for_device(pdev, ps_page->dma, PAGE_SIZE, PCI_DMA_FROMDEVICE); + /* remove the CRC */ + if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) + l1 -= 4; + skb_put(skb, l1); goto copydone; } /* if */ @@ -825,6 +833,12 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, skb->truesize += length; } + /* strip the ethernet crc, problem is we're using pages now so + * this whole operation can get a little cpu intensive + */ + if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) + pskb_trim(skb, skb->len - 4); + copydone: total_rx_bytes += skb->len; total_rx_packets++; @@ -2301,8 +2315,12 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter) else rctl |= E1000_RCTL_LPE; - /* Enable hardware CRC frame stripping */ - rctl |= E1000_RCTL_SECRC; + /* Some systems expect that the CRC is included in SMBUS traffic. The + * hardware strips the CRC before sending to both SMBUS (BMC) and to + * host memory when this is enabled + */ + if (adapter->flags2 & FLAG2_CRC_STRIPPING) + rctl |= E1000_RCTL_SECRC; /* Setup buffer sizes */ rctl &= ~E1000_RCTL_SZ_4096; @@ -4766,6 +4784,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, adapter->ei = ei; adapter->pba = ei->pba; adapter->flags = ei->flags; + adapter->flags2 = ei->flags2; adapter->hw.adapter = adapter; adapter->hw.mac.type = ei->mac; adapter->msg_enable = (1 << NETIF_MSG_DRV | NETIF_MSG_PROBE) - 1; diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c index 77a3d7207a5f..e909f96698e8 100644 --- a/drivers/net/e1000e/param.c +++ b/drivers/net/e1000e/param.c @@ -151,6 +151,16 @@ E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround"); */ E1000_PARAM(WriteProtectNVM, "Write-protect NVM [WARNING: disabling this can lead to corrupted NVM]"); +/* + * Enable CRC Stripping + * + * Valid Range: 0, 1 + * + * Default Value: 1 (enabled) + */ +E1000_PARAM(CrcStripping, "Enable CRC Stripping, disable if your BMC needs " \ + "the CRC"); + struct e1000_option { enum { enable_option, range_option, list_option } type; const char *name; @@ -404,6 +414,21 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter) adapter->flags |= FLAG_SMART_POWER_DOWN; } } + { /* CRC Stripping */ + const struct e1000_option opt = { + .type = enable_option, + .name = "CRC Stripping", + .err = "defaulting to enabled", + .def = OPTION_ENABLED + }; + + if (num_CrcStripping > bd) { + unsigned int crc_stripping = CrcStripping[bd]; + e1000_validate_option(&crc_stripping, &opt, adapter); + if (crc_stripping == OPTION_ENABLED) + adapter->flags2 |= FLAG2_CRC_STRIPPING; + } + } { /* Kumeran Lock Loss Workaround */ const struct e1000_option opt = { .type = enable_option, -- cgit v1.2.2 From 9b44fb89cab6e01816cdc05d6b59fdcf8100b8c3 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 29 Oct 2008 23:24:14 +0100 Subject: libertas_tf: fix skb tail pointer skb->tail can't be meant here because it's not the same across 32/64 bit compilations. This means there's no way the current driver can work on 64-bit architectures. Signed-off-by: Johannes Berg Cc: stable@kernel.org [2.6.27] Signed-off-by: John W. Linville --- drivers/net/wireless/libertas_tf/if_usb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/libertas_tf/if_usb.c b/drivers/net/wireless/libertas_tf/if_usb.c index 1cc03a8dd67a..59634c33b1f9 100644 --- a/drivers/net/wireless/libertas_tf/if_usb.c +++ b/drivers/net/wireless/libertas_tf/if_usb.c @@ -331,7 +331,7 @@ static int __if_usb_submit_rx_urb(struct if_usb_card *cardp, /* Fill the receive configuration URB and initialise the Rx call back */ usb_fill_bulk_urb(cardp->rx_urb, cardp->udev, usb_rcvbulkpipe(cardp->udev, cardp->ep_in), - (void *) (skb->tail), + skb_tail_pointer(skb), MRVDRV_ETH_RX_PACKET_BUFFER_SIZE, callbackfn, cardp); cardp->rx_urb->transfer_flags |= URB_ZERO_PACKET; -- cgit v1.2.2 From 8e3bad65a59915f2ddc40f62a180ad81695d8440 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 17 Nov 2008 10:59:59 +0100 Subject: mac80211: remove ieee80211_notify_mac Before ieee80211_notify_mac() was added, it was presented with the use case of using it to tell mac80211 that the association may have been lost because the firmware crashed/reset. Since then, it has also been used by iwlwifi to (slightly) speed up re-association after resume, a workaround around the fact that mac80211 has no suspend/resume handling yet. It is also not used by any other drivers, so clearly it cannot be necessary for "good enough" suspend/resume. Unfortunately, the callback suffers from a severe problem: It only works for station mode. If suspend/resume happens while in IBSS or any other mode (but station), then the callback is pointless. Recently, it has created a number of locking issues, first because it required rtnl locking rather than RCU due to calling sleeping functions within the critical section, and now because it's called by iwlwifi from the mac80211 workqueue that may not use the rtnl because it is flushed under rtnl. (cf. http://bugzilla.kernel.org/show_bug.cgi?id=12046) I think, therefore, that we should take a step back, remove it entirely for now and add the small feature it provided properly. For suspend and resume we will need to introduce new hooks, and for the case where the firmware was reset the driver will probably simply just pretend it has done a suspend/resume cycle to get mac80211 to reprogram the hardware completely, not just try to connect to the current AP again in station mode. When doing so, we will need to take into account locking issues and possibly defer to schedule_work from within mac80211 for the resume operation, while the suspend operation must be done directly. Proper suspend/resume should also not necessarily try to reconnect to the current AP, the time spent in suspend may have been short enough to not be disconnected from the AP, mac80211 will detect that the AP went out of range quickly if it did, and if the association is lost then the AP will disassoc as soon as a data frame is sent. We might also take into account WWOL then, and have mac80211 program the hardware into such a mode where it is available and requested. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn.c | 1 - drivers/net/wireless/iwlwifi/iwl3945-base.c | 1 - 2 files changed, 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 8d690a0eb1a9..6751bb2b8ae2 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -2341,7 +2341,6 @@ static void iwl_bg_alive_start(struct work_struct *data) mutex_lock(&priv->mutex); iwl_alive_start(priv); mutex_unlock(&priv->mutex); - ieee80211_notify_mac(priv->hw, IEEE80211_NOTIFY_RE_ASSOC); } static void iwl4965_bg_rf_kill(struct work_struct *work) diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 285b53e7e261..45a6b0c35695 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -6012,7 +6012,6 @@ static void iwl3945_bg_alive_start(struct work_struct *data) mutex_lock(&priv->mutex); iwl3945_alive_start(priv); mutex_unlock(&priv->mutex); - ieee80211_notify_mac(priv->hw, IEEE80211_NOTIFY_RE_ASSOC); } static void iwl3945_bg_rf_kill(struct work_struct *work) -- cgit v1.2.2 From 4018517a1a69a85c3d61b20fa02f187b80773137 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 18 Nov 2008 01:47:21 +0100 Subject: iwlagn: fix RX skb alignment So I dug deeper into the DMA problems I had with iwlagn and a kind soul helped me in that he said something about pci-e alignment and mentioned the iwl_rx_allocate function to check for crossing 4KB boundaries. Since there's 8KB A-MPDU support, crossing 4k boundaries didn't seem like something the device would fail with, but when I looked into the function for a minute anyway I stumbled over this little gem: BUG_ON(rxb->dma_addr & (~DMA_BIT_MASK(36) & 0xff)); Clearly, that is a totally bogus check, one would hope the compiler removes it entirely. (Think about it) After fixing it, I obviously ran into it, nothing guarantees the alignment the way you want it, because of the way skbs and their headroom are allocated. I won't explain that here nor double-check that I'm right, that goes beyond what most of the CC'ed people care about. So then I came up with the patch below, and so far my system has survived minutes with 64K pages, when it would previously fail in seconds. And I haven't seen a single instance of the TX bug either. But when you see the patch it'll be pretty obvious to you why. This should fix the following reported kernel bugs: http://bugzilla.kernel.org/show_bug.cgi?id=11596 http://bugzilla.kernel.org/show_bug.cgi?id=11393 http://bugzilla.kernel.org/show_bug.cgi?id=11983 I haven't checked if there are any elsewhere, but I suppose RHBZ will have a few instances too... I'd like to ask anyone who is CC'ed (those are people I know ran into the bug) to try this patch. I am convinced that this patch is correct in spirit, but I haven't understood why, for example, there are so many unmap calls. I'm not entirely convinced that this is the only bug leading to the TX reply errors. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn.c | 6 +++--- drivers/net/wireless/iwlwifi/iwl-dev.h | 3 ++- drivers/net/wireless/iwlwifi/iwl-rx.c | 26 +++++++++++++++++--------- 3 files changed, 22 insertions(+), 13 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 6751bb2b8ae2..444c5cc05f03 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -1384,7 +1384,7 @@ void iwl_rx_handle(struct iwl_priv *priv) rxq->queue[i] = NULL; - pci_dma_sync_single_for_cpu(priv->pci_dev, rxb->dma_addr, + pci_dma_sync_single_for_cpu(priv->pci_dev, rxb->aligned_dma_addr, priv->hw_params.rx_buf_size, PCI_DMA_FROMDEVICE); pkt = (struct iwl_rx_packet *)rxb->skb->data; @@ -1436,8 +1436,8 @@ void iwl_rx_handle(struct iwl_priv *priv) rxb->skb = NULL; } - pci_unmap_single(priv->pci_dev, rxb->dma_addr, - priv->hw_params.rx_buf_size, + pci_unmap_single(priv->pci_dev, rxb->real_dma_addr, + priv->hw_params.rx_buf_size + 256, PCI_DMA_FROMDEVICE); spin_lock_irqsave(&rxq->lock, flags); list_add_tail(&rxb->list, &priv->rxq.rx_used); diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index c018121085e9..9966d4e384ce 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -89,7 +89,8 @@ extern struct iwl_cfg iwl5100_abg_cfg; #define DEFAULT_LONG_RETRY_LIMIT 4U struct iwl_rx_mem_buffer { - dma_addr_t dma_addr; + dma_addr_t real_dma_addr; + dma_addr_t aligned_dma_addr; struct sk_buff *skb; struct list_head list; }; diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c index 7cde9d76ff5d..0509c16dbe75 100644 --- a/drivers/net/wireless/iwlwifi/iwl-rx.c +++ b/drivers/net/wireless/iwlwifi/iwl-rx.c @@ -204,7 +204,7 @@ int iwl_rx_queue_restock(struct iwl_priv *priv) list_del(element); /* Point to Rx buffer via next RBD in circular buffer */ - rxq->bd[rxq->write] = iwl_dma_addr2rbd_ptr(priv, rxb->dma_addr); + rxq->bd[rxq->write] = iwl_dma_addr2rbd_ptr(priv, rxb->aligned_dma_addr); rxq->queue[rxq->write] = rxb; rxq->write = (rxq->write + 1) & RX_QUEUE_MASK; rxq->free_count--; @@ -251,7 +251,7 @@ void iwl_rx_allocate(struct iwl_priv *priv) rxb = list_entry(element, struct iwl_rx_mem_buffer, list); /* Alloc a new receive buffer */ - rxb->skb = alloc_skb(priv->hw_params.rx_buf_size, + rxb->skb = alloc_skb(priv->hw_params.rx_buf_size + 256, __GFP_NOWARN | GFP_ATOMIC); if (!rxb->skb) { if (net_ratelimit()) @@ -266,9 +266,17 @@ void iwl_rx_allocate(struct iwl_priv *priv) list_del(element); /* Get physical address of RB/SKB */ - rxb->dma_addr = - pci_map_single(priv->pci_dev, rxb->skb->data, - priv->hw_params.rx_buf_size, PCI_DMA_FROMDEVICE); + rxb->real_dma_addr = pci_map_single( + priv->pci_dev, + rxb->skb->data, + priv->hw_params.rx_buf_size + 256, + PCI_DMA_FROMDEVICE); + /* dma address must be no more than 36 bits */ + BUG_ON(rxb->real_dma_addr & ~DMA_BIT_MASK(36)); + /* and also 256 byte aligned! */ + rxb->aligned_dma_addr = ALIGN(rxb->real_dma_addr, 256); + skb_reserve(rxb->skb, rxb->aligned_dma_addr - rxb->real_dma_addr); + list_add_tail(&rxb->list, &rxq->rx_free); rxq->free_count++; } @@ -300,8 +308,8 @@ void iwl_rx_queue_free(struct iwl_priv *priv, struct iwl_rx_queue *rxq) for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) { if (rxq->pool[i].skb != NULL) { pci_unmap_single(priv->pci_dev, - rxq->pool[i].dma_addr, - priv->hw_params.rx_buf_size, + rxq->pool[i].real_dma_addr, + priv->hw_params.rx_buf_size + 256, PCI_DMA_FROMDEVICE); dev_kfree_skb(rxq->pool[i].skb); } @@ -354,8 +362,8 @@ void iwl_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq) * to an SKB, so we need to unmap and free potential storage */ if (rxq->pool[i].skb != NULL) { pci_unmap_single(priv->pci_dev, - rxq->pool[i].dma_addr, - priv->hw_params.rx_buf_size, + rxq->pool[i].real_dma_addr, + priv->hw_params.rx_buf_size + 256, PCI_DMA_FROMDEVICE); priv->alloc_rxb_skb--; dev_kfree_skb(rxq->pool[i].skb); -- cgit v1.2.2 From 79aefa45b20940cbb9104464548ff74f80f2395e Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Wed, 19 Nov 2008 14:17:02 -0800 Subject: ixgbe: fix compilation with gcc-3.4 CC [M] drivers/net/ixgbe/ixgbe_main.o drivers/net/ixgbe/ixgbe_main.c: In function `ixgbe_intr': drivers/net/ixgbe/ixgbe_main.c:1290: sorry, unimplemented: inlining failed in call to 'ixgbe_irq_enable': function body not available drivers/net/ixgbe/ixgbe_main.c:1312: sorry, unimplemented: called from here make[4]: *** [drivers/net/ixgbe/ixgbe_main.o] Error 1 Signed-off-by: Alexey Dobriyan Acked-by: Peter P Waskiewicz Jr Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_main.c | 58 ++++++++++++++++++++---------------------- 1 file changed, 28 insertions(+), 30 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 7548fb7360d9..36f2bb666bf7 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -1287,7 +1287,34 @@ static void ixgbe_set_itr(struct ixgbe_adapter *adapter) return; } -static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter); +/** + * ixgbe_irq_disable - Mask off interrupt generation on the NIC + * @adapter: board private structure + **/ +static inline void ixgbe_irq_disable(struct ixgbe_adapter *adapter) +{ + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, ~0); + IXGBE_WRITE_FLUSH(&adapter->hw); + if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) { + int i; + for (i = 0; i < adapter->num_msix_vectors; i++) + synchronize_irq(adapter->msix_entries[i].vector); + } else { + synchronize_irq(adapter->pdev->irq); + } +} + +/** + * ixgbe_irq_enable - Enable default interrupt generation settings + * @adapter: board private structure + **/ +static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter) +{ + u32 mask; + mask = IXGBE_EIMS_ENABLE_MASK; + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, mask); + IXGBE_WRITE_FLUSH(&adapter->hw); +} /** * ixgbe_intr - legacy mode Interrupt Handler @@ -1393,35 +1420,6 @@ static void ixgbe_free_irq(struct ixgbe_adapter *adapter) } } -/** - * ixgbe_irq_disable - Mask off interrupt generation on the NIC - * @adapter: board private structure - **/ -static inline void ixgbe_irq_disable(struct ixgbe_adapter *adapter) -{ - IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, ~0); - IXGBE_WRITE_FLUSH(&adapter->hw); - if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) { - int i; - for (i = 0; i < adapter->num_msix_vectors; i++) - synchronize_irq(adapter->msix_entries[i].vector); - } else { - synchronize_irq(adapter->pdev->irq); - } -} - -/** - * ixgbe_irq_enable - Enable default interrupt generation settings - * @adapter: board private structure - **/ -static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter) -{ - u32 mask; - mask = IXGBE_EIMS_ENABLE_MASK; - IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, mask); - IXGBE_WRITE_FLUSH(&adapter->hw); -} - /** * ixgbe_configure_msi_and_legacy - Initialize PIN (INTA...) and MSI interrupts * -- cgit v1.2.2 From 31c221c49f92d17632e0d662eb62a27e8b425805 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Wed, 19 Nov 2008 15:50:59 -0800 Subject: net: jme.c rxdesc.flags is __le16, other missing endian swaps This is the minimal patch to fix endian mismatches. These are probably bugs on big-endian arches, noops on little endian. jme_rxsum_ok could be improved to directly take a __le16 and change all of the masks/sets to be in little-endian, but has not been done here to keep the patch small. Signed-off-by: Harvey Harrison Signed-off-by: David S. Miller --- drivers/net/jme.c | 21 ++++++++++----------- 1 file changed, 10 insertions(+), 11 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/jme.c b/drivers/net/jme.c index 81c6cdc3851f..665e70d620fc 100644 --- a/drivers/net/jme.c +++ b/drivers/net/jme.c @@ -912,23 +912,23 @@ jme_alloc_and_feed_skb(struct jme_adapter *jme, int idx) skb_put(skb, framesize); skb->protocol = eth_type_trans(skb, jme->dev); - if (jme_rxsum_ok(jme, rxdesc->descwb.flags)) + if (jme_rxsum_ok(jme, le16_to_cpu(rxdesc->descwb.flags))) skb->ip_summed = CHECKSUM_UNNECESSARY; else skb->ip_summed = CHECKSUM_NONE; - if (rxdesc->descwb.flags & RXWBFLAG_TAGON) { + if (rxdesc->descwb.flags & cpu_to_le16(RXWBFLAG_TAGON)) { if (jme->vlgrp) { jme->jme_vlan_rx(skb, jme->vlgrp, - le32_to_cpu(rxdesc->descwb.vlan)); + le16_to_cpu(rxdesc->descwb.vlan)); NET_STAT(jme).rx_bytes += 4; } } else { jme->jme_rx(skb); } - if ((le16_to_cpu(rxdesc->descwb.flags) & RXWBFLAG_DEST) == - RXWBFLAG_DEST_MUL) + if ((rxdesc->descwb.flags & cpu_to_le16(RXWBFLAG_DEST)) == + cpu_to_le16(RXWBFLAG_DEST_MUL)) ++(NET_STAT(jme).multicast); jme->dev->last_rx = jiffies; @@ -961,7 +961,7 @@ jme_process_receive(struct jme_adapter *jme, int limit) rxdesc = rxring->desc; rxdesc += i; - if ((rxdesc->descwb.flags & RXWBFLAG_OWN) || + if ((rxdesc->descwb.flags & cpu_to_le16(RXWBFLAG_OWN)) || !(rxdesc->descwb.desccnt & RXWBDCNT_WBCPL)) goto out; @@ -1763,10 +1763,9 @@ jme_expand_header(struct jme_adapter *jme, struct sk_buff *skb) } static int -jme_tx_tso(struct sk_buff *skb, - u16 *mss, u8 *flags) +jme_tx_tso(struct sk_buff *skb, __le16 *mss, u8 *flags) { - *mss = skb_shinfo(skb)->gso_size << TXDESC_MSS_SHIFT; + *mss = cpu_to_le16(skb_shinfo(skb)->gso_size << TXDESC_MSS_SHIFT); if (*mss) { *flags |= TXFLAG_LSEN; @@ -1826,11 +1825,11 @@ jme_tx_csum(struct jme_adapter *jme, struct sk_buff *skb, u8 *flags) } static inline void -jme_tx_vlan(struct sk_buff *skb, u16 *vlan, u8 *flags) +jme_tx_vlan(struct sk_buff *skb, __le16 *vlan, u8 *flags) { if (vlan_tx_tag_present(skb)) { *flags |= TXFLAG_TAGON; - *vlan = vlan_tx_tag_get(skb); + *vlan = cpu_to_le16(vlan_tx_tag_get(skb)); } } -- cgit v1.2.2 From de339c2aa7fea18410b1abeab5674bfbd4073a63 Mon Sep 17 00:00:00 2001 From: Trent Piepho Date: Wed, 19 Nov 2008 15:52:41 -0800 Subject: phylib: Fix auto-negotiation restart avoidance A previous patch, 51e2a3846eab18711f4eb59cd0a4c33054e2980a, made genphy_config_aneg() not restart aneg by calling genphy_restart_aneg() if the advertisement hadn't changed. But, genphy_restart_aneg() doesn't just restart aneg, it may also *enable* aneg or un-isolate the PHY from the MII (those functions are controlled by the same register). The code to avoid calling genphy_restart_aneg() didn't consider this. So, modify genphy_config_aneg() to also check if the PHY needs to have aneg enabled or be un-isolated before deciding not to restart aneg. This caused a problem with certain Davicom PHYs, as that driver isolates the PHY (why?) before calling genphy_config_aneg() and expects the PHY to be un-isolated by that function. Signed-off-by: Trent Piepho Reported-by: Scott Wood Signed-off-by: David S. Miller --- drivers/net/phy/phy_device.c | 34 +++++++++++++++++++++++----------- 1 file changed, 23 insertions(+), 11 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 8fb1faca883a..55bc24b234e3 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -564,20 +564,32 @@ EXPORT_SYMBOL(genphy_restart_aneg); */ int genphy_config_aneg(struct phy_device *phydev) { - int result = 0; + int result; - if (AUTONEG_ENABLE == phydev->autoneg) { - int result = genphy_config_advert(phydev); + if (AUTONEG_ENABLE != phydev->autoneg) + return genphy_setup_forced(phydev); + + result = genphy_config_advert(phydev); + + if (result < 0) /* error */ + return result; - if (result < 0) /* error */ - return result; + if (result == 0) { + /* Advertisment hasn't changed, but maybe aneg was never on to + * begin with? Or maybe phy was isolated? */ + int ctl = phy_read(phydev, MII_BMCR); + + if (ctl < 0) + return ctl; + + if (!(ctl & BMCR_ANENABLE) || (ctl & BMCR_ISOLATE)) + result = 1; /* do restart aneg */ + } - /* Only restart aneg if we are advertising something different - * than we were before. */ - if (result > 0) - result = genphy_restart_aneg(phydev); - } else - result = genphy_setup_forced(phydev); + /* Only restart aneg if we are advertising something different + * than we were before. */ + if (result > 0) + result = genphy_restart_aneg(phydev); return result; } -- cgit v1.2.2 From b88ed5cc884e4c28d787cf0912b8635376f16a87 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Wed, 19 Nov 2008 15:54:38 -0800 Subject: net: ipg.c fix bracing on endian swapping rxfd->frag_info is a __le64, IPG_RFI_FRAGLEN is a cpu-endian constant and wants to be outside of the le64_to_cpu. Fixed in multiple places. Also an occurrence where le64_to_cpu was used instead of cpu_to_le64 Signed-off-by: Harvey Harrison Signed-off-by: David S. Miller --- drivers/net/ipg.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ipg.c b/drivers/net/ipg.c index 7373dafbb3f7..059369885be1 100644 --- a/drivers/net/ipg.c +++ b/drivers/net/ipg.c @@ -1112,7 +1112,7 @@ static void ipg_nic_rx_free_skb(struct net_device *dev) struct ipg_rx *rxfd = sp->rxd + entry; pci_unmap_single(sp->pdev, - le64_to_cpu(rxfd->frag_info & ~IPG_RFI_FRAGLEN), + le64_to_cpu(rxfd->frag_info) & ~IPG_RFI_FRAGLEN, sp->rx_buf_sz, PCI_DMA_FROMDEVICE); dev_kfree_skb_irq(sp->rx_buff[entry]); sp->rx_buff[entry] = NULL; @@ -1179,7 +1179,7 @@ static int ipg_nic_rx_check_error(struct net_device *dev) */ if (sp->rx_buff[entry]) { pci_unmap_single(sp->pdev, - le64_to_cpu(rxfd->frag_info & ~IPG_RFI_FRAGLEN), + le64_to_cpu(rxfd->frag_info) & ~IPG_RFI_FRAGLEN, sp->rx_buf_sz, PCI_DMA_FROMDEVICE); dev_kfree_skb_irq(sp->rx_buff[entry]); @@ -1246,7 +1246,7 @@ static void ipg_nic_rx_with_start(struct net_device *dev, if (jumbo->found_start) dev_kfree_skb_irq(jumbo->skb); - pci_unmap_single(pdev, le64_to_cpu(rxfd->frag_info & ~IPG_RFI_FRAGLEN), + pci_unmap_single(pdev, le64_to_cpu(rxfd->frag_info) & ~IPG_RFI_FRAGLEN, sp->rx_buf_sz, PCI_DMA_FROMDEVICE); skb_put(skb, sp->rxfrag_size); @@ -1349,7 +1349,7 @@ static int ipg_nic_rx_jumbo(struct net_device *dev) unsigned int entry = curr % IPG_RFDLIST_LENGTH; struct ipg_rx *rxfd = sp->rxd + entry; - if (!(rxfd->rfs & le64_to_cpu(IPG_RFS_RFDDONE))) + if (!(rxfd->rfs & cpu_to_le64(IPG_RFS_RFDDONE))) break; switch (ipg_nic_rx_check_frame_type(dev)) { -- cgit v1.2.2 From fb5e2f9b9410a4362897d12dc1ed4f7cec1b0d45 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Mon, 17 Nov 2008 20:29:58 +0000 Subject: sh: sh_eth: Update to change of mii_bus Update to change of mii_bus interface and fix some warning. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: David S. Miller --- drivers/net/sh_eth.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c index a24bb68887ab..59f242a67714 100644 --- a/drivers/net/sh_eth.c +++ b/drivers/net/sh_eth.c @@ -927,7 +927,7 @@ static int sh_eth_start_xmit(struct sk_buff *skb, struct net_device *ndev) struct sh_eth_private *mdp = netdev_priv(ndev); struct sh_eth_txdesc *txdesc; u32 entry; - int flags; + unsigned long flags; spin_lock_irqsave(&mdp->lock, flags); if ((mdp->cur_tx - mdp->dirty_tx) >= (TX_RING_SIZE - 4)) { @@ -1141,7 +1141,7 @@ static int sh_mdio_init(struct net_device *ndev, int id) /* Hook up MII support for ethtool */ mdp->mii_bus->name = "sh_mii"; mdp->mii_bus->parent = &ndev->dev; - mdp->mii_bus->id[0] = id; + snprintf(mdp->mii_bus->id, MII_BUS_ID_SIZE, "%x", id); /* PHY IRQ */ mdp->mii_bus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL); -- cgit v1.2.2 From bcb3336ce4354395e38df7e2da110fca61f86a84 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Tue, 18 Nov 2008 04:28:35 +0000 Subject: mv643xx_eth: fix the order of mdiobus_{unregister, free}() calls Signed-off-by: Lennert Buytenhek Signed-off-by: David S. Miller --- drivers/net/mv643xx_eth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index b9dcdbd369f8..baa7e845a011 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -2435,8 +2435,8 @@ static int mv643xx_eth_shared_remove(struct platform_device *pdev) struct mv643xx_eth_shared_platform_data *pd = pdev->dev.platform_data; if (pd == NULL || pd->shared_smi == NULL) { - mdiobus_free(msp->smi_bus); mdiobus_unregister(msp->smi_bus); + mdiobus_free(msp->smi_bus); } if (msp->err_interrupt != NO_IRQ) free_irq(msp->err_interrupt, msp); -- cgit v1.2.2 From 11b4aa03b212cbaa969df25e723fbd400a6e24b9 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Tue, 18 Nov 2008 04:28:58 +0000 Subject: mv643xx_eth: fix recycle check bound When mv643xx_eth allocates skbuffs, it adds 'dma_get_cache_alignment() - 1' to the length it needs, so that it can align the skb's ->data pointer to a cache boundary. When checking whether a transmitted skbuff can be reused as a receive buffer, these bytes needs to be included into the minimum bound for the recycle check. Signed-off-by: Lennert Buytenhek Signed-off-by: David S. Miller --- drivers/net/mv643xx_eth.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index baa7e845a011..e513f76f2a9f 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -899,7 +899,8 @@ static int txq_reclaim(struct tx_queue *txq, int budget, int force) if (skb != NULL) { if (skb_queue_len(&mp->rx_recycle) < mp->default_rx_ring_size && - skb_recycle_check(skb, mp->skb_size)) + skb_recycle_check(skb, mp->skb_size + + dma_get_cache_alignment() - 1)) __skb_queue_head(&mp->rx_recycle, skb); else dev_kfree_skb(skb); -- cgit v1.2.2 From a7f75c0c9cfb628512b30795bcba02c8a97e03a0 Mon Sep 17 00:00:00 2001 From: Pantelis Koukousoulas Date: Thu, 20 Nov 2008 01:48:46 -0800 Subject: asix: Fix asix-based cards connecting to 10/100Mbs LAN. Add AX_MEDIUM_ENCK also when speed = 10/100Mbps. This allows my belkin f5d5055 to work with my 100Mbps switch and with an old 10Mbps ISA card. Without this patch, the card is recognized and the interface is brought up fine, but no packets actually flow through the interface. Signed-off-by: Pantelis Koukousoulas Acked-by: David Hollis Signed-off-by: David S. Miller --- drivers/net/usb/asix.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c index e12cdb4543b4..de57490103fc 100644 --- a/drivers/net/usb/asix.c +++ b/drivers/net/usb/asix.c @@ -1102,12 +1102,14 @@ static int ax88178_link_reset(struct usbnet *dev) mode = AX88178_MEDIUM_DEFAULT; if (ecmd.speed == SPEED_1000) - mode |= AX_MEDIUM_GM | AX_MEDIUM_ENCK; + mode |= AX_MEDIUM_GM; else if (ecmd.speed == SPEED_100) mode |= AX_MEDIUM_PS; else mode &= ~(AX_MEDIUM_PS | AX_MEDIUM_GM); + mode |= AX_MEDIUM_ENCK; + if (ecmd.duplex == DUPLEX_FULL) mode |= AX_MEDIUM_FD; else -- cgit v1.2.2 From eafdcb433f854c8cb06747a80fa3df7c72147be6 Mon Sep 17 00:00:00 2001 From: Vernon Sauder Date: Thu, 20 Nov 2008 01:56:08 -0800 Subject: smc911x: Fix printf format typo in smc911x driver. Signed-off-by: Vernon Sauder Signed-off-by: David S. Miller --- drivers/net/smc911x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c index 1f26ab0e7986..b185cd12269c 100644 --- a/drivers/net/smc911x.c +++ b/drivers/net/smc911x.c @@ -1813,7 +1813,7 @@ static int __init smc911x_probe(struct net_device *dev) val = SMC_GET_BYTE_TEST(lp); DBG(SMC_DEBUG_MISC, "%s: endian probe returned 0x%04x\n", CARDNAME, val); if (val != 0x87654321) { - printk(KERN_ERR "Invalid chip endian 0x08%x\n",val); + printk(KERN_ERR "Invalid chip endian 0x%08x\n",val); retval = -ENODEV; goto err_out; } -- cgit v1.2.2 From a849854fc7e200d5e5a437dec9c1d0e8b105e50f Mon Sep 17 00:00:00 2001 From: Alan Jenkins Date: Thu, 20 Nov 2008 04:18:25 -0800 Subject: atl2: don't request irq on resume if netif running If the device is suspended with the cable disconnected, then resumed with the cable connected, dev->open is called before resume. During resume, we request an IRQ, but the IRQ was already assigned during dev->open, resulting in the warning shown below. Don't request an IRQ if the device is running. Call Trace: [] warn_on_slowpath+0x40/0x59 [] raw_pci_read+0x4d/0x55 [] pci_read+0x1c/0x21 [] __pci_find_next_cap_ttl+0x44/0x70 [] __pci_find_next_cap+0x1a/0x1f [] pci_find_capability+0x28/0x2c [] pci_msi_check_device+0x53/0x62 [] pci_enable_msi+0x3a/0x1cd [] atl2_write_phy_reg+0x40/0x5f [atl2] [] dma_generic_alloc_coherent+0x0/0xd7 [] atl2_request_irq+0x15/0x49 [atl2] [] atl2_open+0x20b/0x297 [atl2] [] dev_open+0x62/0x91 [] dev_change_flags+0x93/0x141 [] do_setlink+0x238/0x2d5 [] rtnl_setlink+0xa9/0xbf [] mutex_lock+0xb/0x19 [] rtnl_dump_ifinfo+0x0/0x69 [] rtnl_setlink+0x0/0xbf [] rtnetlink_rcv_msg+0x185/0x19f [] sock_rmalloc+0x23/0x57 [] rtnetlink_rcv_msg+0x0/0x19f [] netlink_rcv_skb+0x2d/0x71 [] rtnetlink_rcv+0x14/0x1a [] netlink_unicast+0x184/0x1e4 [] netlink_sendmsg+0x233/0x240 [] sock_sendmsg+0xb7/0xd0 [] autoremove_wake_function+0x0/0x2b [] autoremove_wake_function+0x0/0x2b [] mempool_alloc+0x2d/0x9e [] scsi_pool_alloc_command+0x35/0x4f [] mutex_lock+0xb/0x19 [] unix_stream_recvmsg+0x357/0x3e2 [] copy_from_user+0x23/0x4f [] verify_iovec+0x3e/0x6c [] sys_sendmsg+0x18d/0x1f0 [] sys_recvmsg+0x146/0x1c8 [] sys_recvmsg+0x1b4/0x1c8 [] __wake_up+0xf/0x15 [] netlink_table_ungrab+0x17/0x19 [] copy_to_user+0x25/0x3b [] move_addr_to_user+0x50/0x68 [] sys_getsockname+0x6f/0x9a [] sys_getsockname+0x89/0x9a [] do_wp_page+0x3ae/0x41a [] handle_mm_fault+0x4c5/0x540 [] sys_socketcall+0x176/0x1b0 [] sysenter_do_call+0x12/0x21 Signed-off-by: Alan Jenkins Signed-off-by: Jay Cliburn Signed-off-by: David S. Miller --- drivers/net/atlx/atl2.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/atlx/atl2.c b/drivers/net/atlx/atl2.c index f5bdc92c1a65..8571e8c0bc67 100644 --- a/drivers/net/atlx/atl2.c +++ b/drivers/net/atlx/atl2.c @@ -1690,9 +1690,11 @@ static int atl2_resume(struct pci_dev *pdev) ATL2_WRITE_REG(&adapter->hw, REG_WOL_CTRL, 0); - err = atl2_request_irq(adapter); - if (netif_running(netdev) && err) - return err; + if (netif_running(netdev)) { + err = atl2_request_irq(adapter); + if (err) + return err; + } atl2_reset_hw(&adapter->hw); -- cgit v1.2.2 From 6436cbcd735a11fc93bf3353c68914bc545e6d1e Mon Sep 17 00:00:00 2001 From: Giuseppe Cavallaro Date: Thu, 20 Nov 2008 20:43:18 -0800 Subject: phy: fix phy_id detection also for broken hardware. This patch fixes the case when the phy_ids is mostly Fs and in some case 0x0 due to broken hardware. Signed-off-by: Giuseppe Cavallaro Signed-off-by: David S. Miller --- drivers/net/phy/phy_device.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 55bc24b234e3..25acbbde4a60 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -227,8 +227,17 @@ struct phy_device * get_phy_device(struct mii_bus *bus, int addr) if (r) return ERR_PTR(r); - /* If the phy_id is all Fs or all 0s, there is no device there */ - if ((0xffff == phy_id) || (0x00 == phy_id)) + /* If the phy_id is mostly Fs, there is no device there */ + if ((phy_id & 0x1fffffff) == 0x1fffffff) + return NULL; + + /* + * Broken hardware is sometimes missing the pull down resistor on the + * MDIO line, which results in reads to non-existent devices returning + * 0 rather than 0xffff. Catch this here and treat 0 as a non-existent + * device as well. + */ + if (phy_id == 0) return NULL; dev = phy_device_create(bus, addr, phy_id); -- cgit v1.2.2 From 208fbec5bec1de4fce48aab41efde11ba25ab04c Mon Sep 17 00:00:00 2001 From: Cord Walter Date: Thu, 20 Nov 2008 13:46:57 +0000 Subject: axnet_cs / pcnet_cs: moving PCMCIA_DEVICE_PROD_ID for Netgear FA411 Hi, after noticing that my Netgear FA411 (PCMCIA-NIC) [1] stopped working with the release of the 2.6.25 kernel (sidux-version), I checked the respective driver sources and noticed that the pcnet_cs driver bailed out with "use axnet_cs instead" for the Netgear FA411, but axnet_cs doesn't claim this ID. I compiled a kernel with the PCMCIA-ID for the netgear card moved to axnet_cs from pcnet_cs which worked. I then contacted sidux-kernel maintainer Stefan Lippers-Hollmann who turned the info into this patch and integrated it into the kernel: This works for me and AFAIK there were no reports of any breakage for other devices on sidux-support. This looks like a trivial patch, but since I have very limited experience with kernel modifications I might be woefully wrong there. But if there are no side effects of this patch, is it possible to get it into the official kernel? I can provide more detailed information on the affected hardware if necessary. -cord [1] Socket 1 Device 0: [axnet_cs] (bus ID: 1.0) Configuration: state: on Product Name: NETGEAR FA411 Fast Ethernet Identification: manf_id: 0x0149 card_id: 0x0411 function: 6 (network) prod_id(1): "NETGEAR" (0x9aa79dc3) prod_id(2): "FA411" (0x40fad875) prod_id(3): "Fast Ethernet" (0xb4be14e3) prod_id(4): --- (---) From: Stefan Lippers-Hollmann Date: Sat, 1 Nov 2008 23:53:04 +0000 Subject: PCMCIA: move PCMCIA ID for Netgear FA411 from pcnet_cs to axnet_cs: Since kernel 2.6.25, commit 61da96be07ec860e260ca4af0199b9d48d000b80 (pcnet_cs: if AX88190-based card, printk "use axnet_cs instead" message.), pcnet_cs bails out with "use axnet_cs instead" for the Netgear FA411, but axnet_cs doesn't claim this ID. Socket 1 Device 0: [axnet_cs] (bus ID: 1.0) Configuration: state: on Product Name: NETGEAR FA411 Fast Ethernet Identification: manf_id: 0x0149 card_id: 0x0411 function: 6 (network) prod_id(1): "NETGEAR" (0x9aa79dc3) prod_id(2): "FA411" (0x40fad875) prod_id(3): "Fast Ethernet" (0xb4be14e3) prod_id(4): --- (---) Cc: stable [2.6.25, 2.6.26, 2.6.27] Signed-off-by: Stefan Lippers-Hollmann Signed-off-by: Cord Walter Signed-off-by: David S. Miller --- drivers/net/pcmcia/axnet_cs.c | 1 + drivers/net/pcmcia/pcnet_cs.c | 1 - 2 files changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c index b37a498939ae..713091e2b896 100644 --- a/drivers/net/pcmcia/axnet_cs.c +++ b/drivers/net/pcmcia/axnet_cs.c @@ -779,6 +779,7 @@ static struct pcmcia_device_id axnet_ids[] = { PCMCIA_DEVICE_PROD_ID12("IO DATA", "ETXPCM", 0x547e66dc, 0x233adac2), PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 PC Card (PCMPC100 V3)", 0x0733cc81, 0x232019a8), PCMCIA_DEVICE_PROD_ID12("MELCO", "LPC3-TX", 0x481e0094, 0xf91af609), + PCMCIA_DEVICE_PROD_ID12("NETGEAR", "FA411", 0x9aa79dc3, 0x40fad875), PCMCIA_DEVICE_PROD_ID12("PCMCIA", "100BASE", 0x281f1c5d, 0x7c2add04), PCMCIA_DEVICE_PROD_ID12("PCMCIA", "FastEtherCard", 0x281f1c5d, 0x7ef26116), PCMCIA_DEVICE_PROD_ID12("PCMCIA", "FEP501", 0x281f1c5d, 0x2e272058), diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index e40d6301aa7a..ce486f094492 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -1693,7 +1693,6 @@ static struct pcmcia_device_id pcnet_ids[] = { PCMCIA_DEVICE_PROD_ID12("National Semiconductor", "InfoMover NE4100", 0x36e1191f, 0xa6617ec8), PCMCIA_DEVICE_PROD_ID12("NEC", "PC-9801N-J12", 0x18df0ba0, 0xbc912d76), PCMCIA_DEVICE_PROD_ID12("NETGEAR", "FA410TX", 0x9aa79dc3, 0x60e5bc0e), - PCMCIA_DEVICE_PROD_ID12("NETGEAR", "FA411", 0x9aa79dc3, 0x40fad875), PCMCIA_DEVICE_PROD_ID12("Network Everywhere", "Fast Ethernet 10/100 PC Card", 0x820a67b6, 0x31ed1a5f), PCMCIA_DEVICE_PROD_ID12("NextCom K.K.", "Next Hawk", 0xaedaec74, 0xad050ef1), PCMCIA_DEVICE_PROD_ID12("PCMCIA", "10/100Mbps Ethernet Card", 0x281f1c5d, 0x6e41773b), -- cgit v1.2.2 From 38ae07e44bb2dc86770555a1acafcb937ec74478 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 21 Nov 2008 16:33:25 -0800 Subject: net/hp-plus: fix link errors Fix hp-plus driver link errors. Builds as loadable module and kernel image driver. All drivers that use 8390.o or 8390p.o that will build on i386 with MCA/PCI/EISA/ISA were built successfully both =m and =y. drivers/built-in.o: In function `hpp_open': hp-plus.c:(.text+0xac06c): undefined reference to `eip_interrupt' hp-plus.c:(.text+0xac0d7): undefined reference to `eip_open' drivers/built-in.o: In function `hpp_close': hp-plus.c:(.text+0xac1bb): undefined reference to `eip_close' drivers/built-in.o: In function `hpp_probe1': hp-plus.c:(.init.text+0xa98a): undefined reference to `NS8390p_init' drivers/built-in.o: In function `hp_plus_probe': (.init.text+0xa9fe): undefined reference to `__alloc_eip_netdev' Signed-off-by: Randy Dunlap Signed-off-by: David S. Miller --- drivers/net/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/Makefile b/drivers/net/Makefile index f19acf8b9220..017383ad5ec6 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -114,7 +114,7 @@ obj-$(CONFIG_EL2) += 3c503.o 8390p.o obj-$(CONFIG_NE2000) += ne.o 8390p.o obj-$(CONFIG_NE2_MCA) += ne2.o 8390p.o obj-$(CONFIG_HPLAN) += hp.o 8390p.o -obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390.o +obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390p.o obj-$(CONFIG_ULTRA) += smc-ultra.o 8390.o obj-$(CONFIG_ULTRAMCA) += smc-mca.o 8390.o obj-$(CONFIG_ULTRA32) += smc-ultra32.o 8390.o -- cgit v1.2.2 From ece4af18e07a5cea592ca095844783db4a349cb2 Mon Sep 17 00:00:00 2001 From: Qinghuang Feng Date: Sun, 23 Nov 2008 15:46:55 -0800 Subject: driver/net/*: remove redundant argument comments remove redundant argument comments in files of drivers/net/* Signed-off-by: Qinghuang Feng Signed-off-by: David S. Miller --- drivers/net/e1000e/netdev.c | 1 - drivers/net/igb/igb_main.c | 4 ---- drivers/net/ixgbe/ixgbe_main.c | 1 - drivers/net/pcmcia/axnet_cs.c | 1 - drivers/net/sis900.c | 1 - drivers/net/spider_net.c | 4 ---- 6 files changed, 12 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 91795f78c3e4..122539a0e1fe 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -345,7 +345,6 @@ no_buffers: /** * e1000_alloc_jumbo_rx_buffers - Replace used jumbo receive buffers * @adapter: address of board private structure - * @rx_ring: pointer to receive ring structure * @cleaned_count: number of buffers to allocate this pass **/ diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index 1cbae85b1426..20d27e622ec1 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -1980,7 +1980,6 @@ static void igb_configure_rx(struct igb_adapter *adapter) /** * igb_free_tx_resources - Free Tx Resources per Queue - * @adapter: board private structure * @tx_ring: Tx descriptor ring for a specific queue * * Free all transmit software resources @@ -2033,7 +2032,6 @@ static void igb_unmap_and_free_tx_resource(struct igb_adapter *adapter, /** * igb_clean_tx_ring - Free Tx Buffers - * @adapter: board private structure * @tx_ring: ring to be cleaned **/ static void igb_clean_tx_ring(struct igb_ring *tx_ring) @@ -2080,7 +2078,6 @@ static void igb_clean_all_tx_rings(struct igb_adapter *adapter) /** * igb_free_rx_resources - Free Rx Resources - * @adapter: board private structure * @rx_ring: ring to clean the resources from * * Free all receive software resources @@ -2120,7 +2117,6 @@ static void igb_free_all_rx_resources(struct igb_adapter *adapter) /** * igb_clean_rx_ring - Free Rx Buffers per Queue - * @adapter: board private structure * @rx_ring: ring to free buffers from **/ static void igb_clean_rx_ring(struct igb_ring *rx_ring) diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 36f2bb666bf7..b2a7ea887125 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -1320,7 +1320,6 @@ static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter) * ixgbe_intr - legacy mode Interrupt Handler * @irq: interrupt number * @data: pointer to a network interface device structure - * @pt_regs: CPU registers structure **/ static irqreturn_t ixgbe_intr(int irq, void *data) { diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c index 713091e2b896..0418045166c3 100644 --- a/drivers/net/pcmcia/axnet_cs.c +++ b/drivers/net/pcmcia/axnet_cs.c @@ -1175,7 +1175,6 @@ static int ei_start_xmit(struct sk_buff *skb, struct net_device *dev) * ax_interrupt - handle the interrupts from an 8390 * @irq: interrupt number * @dev_id: a pointer to the net_device - * @regs: unused * * Handle the ether interface interrupts. We pull packets from * the 8390 via the card specific functions and fire them at the networking diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c index fa3a460f8e2f..8e8337e8b072 100644 --- a/drivers/net/sis900.c +++ b/drivers/net/sis900.c @@ -1630,7 +1630,6 @@ sis900_start_xmit(struct sk_buff *skb, struct net_device *net_dev) * sis900_interrupt - sis900 interrupt handler * @irq: the irq number * @dev_instance: the client data object - * @regs: snapshot of processor context * * The interrupt handler does all of the Rx thread work, * and cleans up after the Tx thread diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c index b6435d0d71f9..07599b492359 100644 --- a/drivers/net/spider_net.c +++ b/drivers/net/spider_net.c @@ -672,7 +672,6 @@ write_hash: /** * spider_net_prepare_tx_descr - fill tx descriptor with skb data * @card: card structure - * @descr: descriptor structure to fill out * @skb: packet to use * * returns 0 on success, <0 on failure. @@ -867,7 +866,6 @@ spider_net_release_tx_chain(struct spider_net_card *card, int brutal) /** * spider_net_kick_tx_dma - enables TX DMA processing * @card: card structure - * @descr: descriptor address to enable TX processing at * * This routine will start the transmit DMA running if * it is not already running. This routine ned only be @@ -1637,7 +1635,6 @@ spider_net_handle_error_irq(struct spider_net_card *card, u32 status_reg, * spider_net_interrupt - interrupt handler for spider_net * @irq: interrupt number * @ptr: pointer to net_device - * @regs: PU registers * * returns IRQ_HANDLED, if interrupt was for driver, or IRQ_NONE, if no * interrupt found raised by card. @@ -2419,7 +2416,6 @@ spider_net_undo_pci_setup(struct spider_net_card *card) /** * spider_net_setup_pci_dev - sets up the device in terms of PCI operations - * @card: card structure * @pdev: PCI device * * Returns the card structure or NULL if any errors occur -- cgit v1.2.2 From 5147d14e995c097571d383fe1287fb33345a51ee Mon Sep 17 00:00:00 2001 From: Qinghuang Feng Date: Sun, 23 Nov 2008 15:47:24 -0800 Subject: drivers/net/chelsio/sge.c: remove redundant argument comments remove redundant argument comments Signed-off-by: Qinghuang Feng Signed-off-by: David S. Miller --- drivers/net/chelsio/sge.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c index d6c7d2aa761b..7092df50ff78 100644 --- a/drivers/net/chelsio/sge.c +++ b/drivers/net/chelsio/sge.c @@ -1035,10 +1035,6 @@ MODULE_PARM_DESC(copybreak, "Receive copy threshold"); * @pdev: the PCI device that received the packet * @fl: the SGE free list holding the packet * @len: the actual packet length, excluding any SGE padding - * @dma_pad: padding at beginning of buffer left by SGE DMA - * @skb_pad: padding to be used if the packet is copied - * @copy_thres: length threshold under which a packet should be copied - * @drop_thres: # of remaining buffers before we start dropping packets * * Get the next packet from a free list and complete setup of the * sk_buff. If the packet is small we make a copy and recycle the -- cgit v1.2.2 From 11c6dd2c723a9ff9bdd4ee11b2798a08abc94e98 Mon Sep 17 00:00:00 2001 From: Trent Piepho Date: Tue, 25 Nov 2008 01:00:47 -0800 Subject: phylib: Add Vitesse VSC8221 SGMII PHY PHY is mostly compatible with the existing VSC8244 PHY. The init sequence is different and the interrupt mask lacks some bits present in the VSC8244. Rather than making a copy of the existing VSC234x config_intr function and change one constant, I modify it to select the interrupt mask based on which driver is calling it. This lets it be used by both drivers. Signed-off-by: Trent Piepho Signed-off-by: David S. Miller --- drivers/net/phy/vitesse.c | 64 ++++++++++++++++++++++++++++++++++++++++------- 1 file changed, 55 insertions(+), 9 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c index 8874497b6bbf..dd3b2447e85a 100644 --- a/drivers/net/phy/vitesse.c +++ b/drivers/net/phy/vitesse.c @@ -34,6 +34,8 @@ #define MII_VSC8244_IMASK_DUPLEX 0x1000 #define MII_VSC8244_IMASK_MASK 0xf000 +#define MII_VSC8221_IMASK_MASK 0xa000 + /* Vitesse Interrupt Status Register */ #define MII_VSC8244_ISTAT 0x1a #define MII_VSC8244_ISTAT_STATUS 0x8000 @@ -49,6 +51,12 @@ #define MII_VSC8244_AUXCONSTAT_GBIT 0x0010 #define MII_VSC8244_AUXCONSTAT_100 0x0008 +#define MII_VSC8221_AUXCONSTAT_INIT 0x0004 /* need to set this bit? */ +#define MII_VSC8221_AUXCONSTAT_RESERVED 0x0004 + +#define PHY_ID_VSC8244 0x000fc6c0 +#define PHY_ID_VSC8221 0x000fc550 + MODULE_DESCRIPTION("Vitesse PHY driver"); MODULE_AUTHOR("Kriston Carson"); MODULE_LICENSE("GPL"); @@ -95,13 +103,15 @@ static int vsc824x_ack_interrupt(struct phy_device *phydev) return (err < 0) ? err : 0; } -static int vsc824x_config_intr(struct phy_device *phydev) +static int vsc82xx_config_intr(struct phy_device *phydev) { int err; if (phydev->interrupts == PHY_INTERRUPT_ENABLED) err = phy_write(phydev, MII_VSC8244_IMASK, - MII_VSC8244_IMASK_MASK); + phydev->drv->phy_id == PHY_ID_VSC8244 ? + MII_VSC8244_IMASK_MASK : + MII_VSC8221_IMASK_MASK); else { /* * The Vitesse PHY cannot clear the interrupt @@ -120,7 +130,7 @@ static int vsc824x_config_intr(struct phy_device *phydev) /* Vitesse 824x */ static struct phy_driver vsc8244_driver = { - .phy_id = 0x000fc6c0, + .phy_id = PHY_ID_VSC8244, .name = "Vitesse VSC8244", .phy_id_mask = 0x000fffc0, .features = PHY_GBIT_FEATURES, @@ -129,19 +139,55 @@ static struct phy_driver vsc8244_driver = { .config_aneg = &genphy_config_aneg, .read_status = &genphy_read_status, .ack_interrupt = &vsc824x_ack_interrupt, - .config_intr = &vsc824x_config_intr, + .config_intr = &vsc82xx_config_intr, .driver = { .owner = THIS_MODULE,}, }; -static int __init vsc8244_init(void) +static int vsc8221_config_init(struct phy_device *phydev) { - return phy_driver_register(&vsc8244_driver); + int err; + + err = phy_write(phydev, MII_VSC8244_AUX_CONSTAT, + MII_VSC8221_AUXCONSTAT_INIT); + return err; + + /* Perhaps we should set EXT_CON1 based on the interface? + Options are 802.3Z SerDes or SGMII */ +} + +/* Vitesse 8221 */ +static struct phy_driver vsc8221_driver = { + .phy_id = PHY_ID_VSC8221, + .phy_id_mask = 0x000ffff0, + .name = "Vitesse VSC8221", + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_init = &vsc8221_config_init, + .config_aneg = &genphy_config_aneg, + .read_status = &genphy_read_status, + .ack_interrupt = &vsc824x_ack_interrupt, + .config_intr = &vsc82xx_config_intr, + .driver = { .owner = THIS_MODULE,}, +}; + +static int __init vsc82xx_init(void) +{ + int err; + + err = phy_driver_register(&vsc8244_driver); + if (err < 0) + return err; + err = phy_driver_register(&vsc8221_driver); + if (err < 0) + phy_driver_unregister(&vsc8244_driver); + return err; } -static void __exit vsc8244_exit(void) +static void __exit vsc82xx_exit(void) { phy_driver_unregister(&vsc8244_driver); + phy_driver_unregister(&vsc8221_driver); } -module_init(vsc8244_init); -module_exit(vsc8244_exit); +module_init(vsc82xx_init); +module_exit(vsc82xx_exit); -- cgit v1.2.2 From e91af0af8677198346d5d29f09ab39bb3b0e3faf Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 19 Nov 2008 01:22:51 +0100 Subject: iwlagn: fix DMA sync For the RX DMA fix for iwlwifi ("iwlagn: fix RX skb alignment") Luis pointed out: > aligned_dma_addr can obviously be > real_dma_addr at this point, what > guarantees we can use it on our own whim? I asked around, and he's right, there may be platforms that do not allow passing such such an address to the DMA API functions. This patch changes it by using the proper dma_sync_single_range_for_cpu API invented for this purpose. Cc: Luis R. Rodriguez Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 444c5cc05f03..c4c0371c763b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -1384,9 +1384,11 @@ void iwl_rx_handle(struct iwl_priv *priv) rxq->queue[i] = NULL; - pci_dma_sync_single_for_cpu(priv->pci_dev, rxb->aligned_dma_addr, - priv->hw_params.rx_buf_size, - PCI_DMA_FROMDEVICE); + dma_sync_single_range_for_cpu( + &priv->pci_dev->dev, rxb->real_dma_addr, + rxb->aligned_dma_addr - rxb->real_dma_addr, + priv->hw_params.rx_buf_size, + PCI_DMA_FROMDEVICE); pkt = (struct iwl_rx_packet *)rxb->skb->data; /* Reclaim a command buffer only if this packet is a response -- cgit v1.2.2 From ca0c7e5101fd4f37fed8e851709f08580b92fbb3 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Thu, 20 Nov 2008 17:15:12 -0800 Subject: ath9k: Fix SW-IOMMU bounce buffer starvation This should fix the SW-IOMMU bounce buffer starvation seen ok kernel.org bugzilla 11811: http://bugzilla.kernel.org/show_bug.cgi?id=11811 Users on MacBook Pro 3.1/MacBook v2 would see something like: DMA: Out of SW-IOMMU space for 4224 bytes at device 0000:0b:00.0 Unfortunately its only easy to trigger on MacBook Pro 3.1/MacBook v2 so far so its difficult to debug (even with swiotlb=force). We were pci_unmap_single()'ing less bytes than what we called for with pci_map_single() and as such we were starving the swiotlb from its 64MB amount of bounce buffers. We remain consistent and now always use sc->rxbufsize for RX. While at it we update the beacon DMA maps as well to only use the data portion of the skb, previous to this we were pci_map_single()'ing more data for beaconing than what we tell the hardware it can use, therefore pushing more iotlb abuse. Still not sure why this is so easily triggerable on MacBook Pro 3.1, it may be the hardware configuration tends to use more memory > 3GB mark for DMA. Signed-off-by: Maciej Zenczykowski Signed-off-by: Bennyam Malavazi Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/beacon.c | 10 +++++----- drivers/net/wireless/ath9k/recv.c | 6 +++--- 2 files changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath9k/beacon.c b/drivers/net/wireless/ath9k/beacon.c index 9e15c30bbc06..4dd1c1bda0fb 100644 --- a/drivers/net/wireless/ath9k/beacon.c +++ b/drivers/net/wireless/ath9k/beacon.c @@ -170,7 +170,7 @@ static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id) skb = (struct sk_buff *)bf->bf_mpdu; if (skb) { pci_unmap_single(sc->pdev, bf->bf_dmacontext, - skb_end_pointer(skb) - skb->head, + skb->len, PCI_DMA_TODEVICE); } @@ -193,7 +193,7 @@ static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id) bf->bf_buf_addr = bf->bf_dmacontext = pci_map_single(sc->pdev, skb->data, - skb_end_pointer(skb) - skb->head, + skb->len, PCI_DMA_TODEVICE); skb = ieee80211_get_buffered_bc(sc->hw, avp->av_if_data); @@ -352,7 +352,7 @@ int ath_beacon_alloc(struct ath_softc *sc, int if_id) if (bf->bf_mpdu != NULL) { skb = (struct sk_buff *)bf->bf_mpdu; pci_unmap_single(sc->pdev, bf->bf_dmacontext, - skb_end_pointer(skb) - skb->head, + skb->len, PCI_DMA_TODEVICE); dev_kfree_skb_any(skb); bf->bf_mpdu = NULL; @@ -412,7 +412,7 @@ int ath_beacon_alloc(struct ath_softc *sc, int if_id) bf->bf_buf_addr = bf->bf_dmacontext = pci_map_single(sc->pdev, skb->data, - skb_end_pointer(skb) - skb->head, + skb->len, PCI_DMA_TODEVICE); bf->bf_mpdu = skb; @@ -439,7 +439,7 @@ void ath_beacon_return(struct ath_softc *sc, struct ath_vap *avp) if (bf->bf_mpdu != NULL) { struct sk_buff *skb = (struct sk_buff *)bf->bf_mpdu; pci_unmap_single(sc->pdev, bf->bf_dmacontext, - skb_end_pointer(skb) - skb->head, + skb->len, PCI_DMA_TODEVICE); dev_kfree_skb_any(skb); bf->bf_mpdu = NULL; diff --git a/drivers/net/wireless/ath9k/recv.c b/drivers/net/wireless/ath9k/recv.c index 4983402af559..ad5f88879dc4 100644 --- a/drivers/net/wireless/ath9k/recv.c +++ b/drivers/net/wireless/ath9k/recv.c @@ -456,7 +456,7 @@ static int ath_rx_indicate(struct ath_softc *sc, if (nskb != NULL) { bf->bf_mpdu = nskb; bf->bf_buf_addr = pci_map_single(sc->pdev, nskb->data, - skb_end_pointer(nskb) - nskb->head, + sc->sc_rxbufsize, PCI_DMA_FROMDEVICE); bf->bf_dmacontext = bf->bf_buf_addr; ATH_RX_CONTEXT(nskb)->ctx_rxbuf = bf; @@ -542,7 +542,7 @@ int ath_rx_init(struct ath_softc *sc, int nbufs) bf->bf_mpdu = skb; bf->bf_buf_addr = pci_map_single(sc->pdev, skb->data, - skb_end_pointer(skb) - skb->head, + sc->sc_rxbufsize, PCI_DMA_FROMDEVICE); bf->bf_dmacontext = bf->bf_buf_addr; ATH_RX_CONTEXT(skb)->ctx_rxbuf = bf; @@ -1007,7 +1007,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) pci_dma_sync_single_for_cpu(sc->pdev, bf->bf_buf_addr, - skb_tailroom(skb), + sc->sc_rxbufsize, PCI_DMA_FROMDEVICE); pci_unmap_single(sc->pdev, bf->bf_buf_addr, -- cgit v1.2.2 From b4b6cda2298b0c9a0af902312184b775b8867c65 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Thu, 20 Nov 2008 17:15:13 -0800 Subject: ath9k: correct expected max RX buffer size We should only tell the hardware its capable of DMA'ing to us only what we asked dev_alloc_skb(). Prior to this it is possible a large RX'd frame could have corrupted DMA data but for us but we were saved only because we were previously also pci_map_single()'ing the same large value. The issue prior to this though was we were unmapping a smaller amount which the prior DMA patch fixed. Signed-off-by: Bennyam Malavazi Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/recv.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath9k/recv.c b/drivers/net/wireless/ath9k/recv.c index ad5f88879dc4..504a0444d89f 100644 --- a/drivers/net/wireless/ath9k/recv.c +++ b/drivers/net/wireless/ath9k/recv.c @@ -49,10 +49,12 @@ static void ath_rx_buf_link(struct ath_softc *sc, struct ath_buf *bf) ASSERT(skb != NULL); ds->ds_vdata = skb->data; - /* setup rx descriptors */ + /* setup rx descriptors. The sc_rxbufsize here tells the harware + * how much data it can DMA to us and that we are prepared + * to process */ ath9k_hw_setuprxdesc(ah, ds, - skb_tailroom(skb), /* buffer size */ + sc->sc_rxbufsize, 0); if (sc->sc_rxlink == NULL) @@ -398,6 +400,13 @@ static struct sk_buff *ath_rxbuf_alloc(struct ath_softc *sc, * in rx'd frames. */ + /* Note: the kernel can allocate a value greater than + * what we ask it to give us. We really only need 4 KB as that + * is this hardware supports and in fact we need at least 3849 + * as that is the MAX AMSDU size this hardware supports. + * Unfortunately this means we may get 8 KB here from the + * kernel... and that is actually what is observed on some + * systems :( */ skb = dev_alloc_skb(len + sc->sc_cachelsz - 1); if (skb != NULL) { off = ((unsigned long) skb->data) % sc->sc_cachelsz; -- cgit v1.2.2 From 33ab625f2a23e743161f7ccd8e774ce3d3891339 Mon Sep 17 00:00:00 2001 From: Cheng Renquan Date: Sat, 22 Nov 2008 11:22:49 +0800 Subject: ath5k: fix Security issue in DebugFS part of ath5k MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit http://bugzilla.kernel.org/show_bug.cgi?id=12076 Remove any write access to groups and others, only keep write permission to its owner, usually only root user. Reported-by: Jérôme Poulin Signed-off-by: Cheng Renquan Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/debug.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath5k/debug.c b/drivers/net/wireless/ath5k/debug.c index 19980cbd5d5f..ccaeb5c219d2 100644 --- a/drivers/net/wireless/ath5k/debug.c +++ b/drivers/net/wireless/ath5k/debug.c @@ -417,19 +417,19 @@ ath5k_debug_init_device(struct ath5k_softc *sc) sc->debug.debugfs_phydir = debugfs_create_dir(wiphy_name(sc->hw->wiphy), ath5k_global_debugfs); - sc->debug.debugfs_debug = debugfs_create_file("debug", 0666, + sc->debug.debugfs_debug = debugfs_create_file("debug", S_IWUSR | S_IRUGO, sc->debug.debugfs_phydir, sc, &fops_debug); - sc->debug.debugfs_registers = debugfs_create_file("registers", 0444, + sc->debug.debugfs_registers = debugfs_create_file("registers", S_IRUGO, sc->debug.debugfs_phydir, sc, &fops_registers); - sc->debug.debugfs_tsf = debugfs_create_file("tsf", 0666, + sc->debug.debugfs_tsf = debugfs_create_file("tsf", S_IWUSR | S_IRUGO, sc->debug.debugfs_phydir, sc, &fops_tsf); - sc->debug.debugfs_beacon = debugfs_create_file("beacon", 0666, + sc->debug.debugfs_beacon = debugfs_create_file("beacon", S_IWUSR | S_IRUGO, sc->debug.debugfs_phydir, sc, &fops_beacon); - sc->debug.debugfs_reset = debugfs_create_file("reset", 0222, + sc->debug.debugfs_reset = debugfs_create_file("reset", S_IWUSR, sc->debug.debugfs_phydir, sc, &fops_reset); } -- cgit v1.2.2 From 02969b38e6f7cef80e71d673d1e512e029a7009f Mon Sep 17 00:00:00 2001 From: Martin Xu Date: Mon, 24 Nov 2008 10:49:27 +0800 Subject: ath5k: disable beacon filter when station is not associated Ath5k driver has too many interrupts per second at idle http://bugzilla.kernel.org/show_bug.cgi?id=11749 Signed-off-by: Martin Xu Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/base.c | 35 ++++++++++++++++++++++++++++++++++- drivers/net/wireless/ath5k/base.h | 1 + 2 files changed, 35 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index cfd4d052d666..2d14255eb103 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -240,6 +240,10 @@ static u64 ath5k_get_tsf(struct ieee80211_hw *hw); static void ath5k_reset_tsf(struct ieee80211_hw *hw); static int ath5k_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb); +static void ath5k_bss_info_changed(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *bss_conf, + u32 changes); static struct ieee80211_ops ath5k_hw_ops = { .tx = ath5k_tx, @@ -256,6 +260,7 @@ static struct ieee80211_ops ath5k_hw_ops = { .get_tx_stats = ath5k_get_tx_stats, .get_tsf = ath5k_get_tsf, .reset_tsf = ath5k_reset_tsf, + .bss_info_changed = ath5k_bss_info_changed, }; /* @@ -2942,7 +2947,7 @@ static void ath5k_configure_filter(struct ieee80211_hw *hw, sc->opmode != NL80211_IFTYPE_MESH_POINT && test_bit(ATH_STAT_PROMISC, sc->status)) rfilt |= AR5K_RX_FILTER_PROM; - if (sc->opmode == NL80211_IFTYPE_STATION || + if ((sc->opmode == NL80211_IFTYPE_STATION && sc->assoc) || sc->opmode == NL80211_IFTYPE_ADHOC) { rfilt |= AR5K_RX_FILTER_BEACON; } @@ -3083,4 +3088,32 @@ ath5k_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb) end: return ret; } +static void +set_beacon_filter(struct ieee80211_hw *hw, bool enable) +{ + struct ath5k_softc *sc = hw->priv; + struct ath5k_hw *ah = sc->ah; + u32 rfilt; + rfilt = ath5k_hw_get_rx_filter(ah); + if (enable) + rfilt |= AR5K_RX_FILTER_BEACON; + else + rfilt &= ~AR5K_RX_FILTER_BEACON; + ath5k_hw_set_rx_filter(ah, rfilt); + sc->filter_flags = rfilt; +} +static void ath5k_bss_info_changed(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *bss_conf, + u32 changes) +{ + struct ath5k_softc *sc = hw->priv; + if (changes & BSS_CHANGED_ASSOC) { + mutex_lock(&sc->lock); + sc->assoc = bss_conf->assoc; + if (sc->opmode == NL80211_IFTYPE_STATION) + set_beacon_filter(hw, sc->assoc); + mutex_unlock(&sc->lock); + } +} diff --git a/drivers/net/wireless/ath5k/base.h b/drivers/net/wireless/ath5k/base.h index 06d1054ca94b..facc60ddada2 100644 --- a/drivers/net/wireless/ath5k/base.h +++ b/drivers/net/wireless/ath5k/base.h @@ -179,6 +179,7 @@ struct ath5k_softc { struct timer_list calib_tim; /* calibration timer */ int power_level; /* Requested tx power in dbm */ + bool assoc; /* assocate state */ }; #define ath5k_hw_hasbssidmask(_ah) \ -- cgit v1.2.2 From 1d71da164d7fb40fac72c0406a4a531265916fc8 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 25 Nov 2008 21:05:51 -0800 Subject: net: hp-plus uses eip_poll hp-plus uses 8390p.c, so it should use eip_poll(), not ei_poll(). drivers/built-in.o: In function `hpp_probe1': hp-plus.c:(.init.text+0x9cbd): undefined reference to `ei_poll' Signed-off-by: Randy Dunlap Signed-off-by: David S. Miller --- drivers/net/hp-plus.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/hp-plus.c b/drivers/net/hp-plus.c index fbbd3e660c27..c01e290d09d2 100644 --- a/drivers/net/hp-plus.c +++ b/drivers/net/hp-plus.c @@ -230,7 +230,7 @@ static int __init hpp_probe1(struct net_device *dev, int ioaddr) dev->open = &hpp_open; dev->stop = &hpp_close; #ifdef CONFIG_NET_POLL_CONTROLLER - dev->poll_controller = ei_poll; + dev->poll_controller = eip_poll; #endif ei_status.name = name; -- cgit v1.2.2 From bd51126957eeac96d056c670545ff798c89f63f5 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 26 Nov 2008 01:17:01 -0800 Subject: sungem: Fix PCS_MIICTRL register write in gem_init_phy(). Use writel not writeb. Noticed by Hermann Lauer. Signed-off-by: David S. Miller --- drivers/net/sungem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c index 4291458955ef..1349e419673c 100644 --- a/drivers/net/sungem.c +++ b/drivers/net/sungem.c @@ -1714,7 +1714,7 @@ static void gem_init_phy(struct gem *gp) /* Reset PCS unit. */ val = readl(gp->regs + PCS_MIICTRL); val |= PCS_MIICTRL_RST; - writeb(val, gp->regs + PCS_MIICTRL); + writel(val, gp->regs + PCS_MIICTRL); limit = 32; while (readl(gp->regs + PCS_MIICTRL) & PCS_MIICTRL_RST) { -- cgit v1.2.2 From efbbced361f3ff4ff9e85310ccff894185c4d904 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Wed, 26 Nov 2008 15:30:48 -0800 Subject: macvlan: don't broadcast PAUSE frames to macvlan devices PAUSE frames are only relevant for the real device, broadcasting them to all macvlan devices can cause a significant load increase. Reported-by: Ben Greear Tested-by: Ben Greear Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- drivers/net/macvlan.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index 42394505bb50..590039cbb146 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -70,6 +70,9 @@ static void macvlan_broadcast(struct sk_buff *skb, struct sk_buff *nskb; unsigned int i; + if (skb->protocol == htons(ETH_P_PAUSE)) + return; + for (i = 0; i < MACVLAN_HASH_SIZE; i++) { hlist_for_each_entry_rcu(vlan, n, &port->vlan_hash[i], hlist) { dev = vlan->dev; -- cgit v1.2.2 From 9a5aa622dd4cd22b5e0fe83e4a9c0c768d4e2dea Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Fri, 28 Nov 2008 21:29:46 -0800 Subject: mlx4_core: Save/restore default port IB capability mask Commit 7ff93f8b ("mlx4_core: Multiple port type support") introduced support for different port types. As part of that support, SET_PORT is invoked to set the port type during driver startup. However, as a side-effect, for IB ports the invocation of this command also sets the port's capability mask to zero (losing the default value set by FW). To fix this, get the default ib port capabilities (via a MAD_IFC Port Info query) during driver startup, and save them for use in the mlx4_SET_PORT command when setting the port-type to Infiniband. This patch fixes problems with subnet manager (SM) failover such as , which occurred because the IsTrapSupported bit in the capability mask was zeroed. Signed-off-by: Jack Morgenstein Signed-off-by: Roland Dreier --- drivers/net/mlx4/main.c | 8 ++++++++ drivers/net/mlx4/mlx4.h | 1 + drivers/net/mlx4/port.c | 39 ++++++++++++++++++++++++++++++++++++++- 3 files changed, 47 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/mlx4/main.c b/drivers/net/mlx4/main.c index 468921b8f4b6..90a0281d15ea 100644 --- a/drivers/net/mlx4/main.c +++ b/drivers/net/mlx4/main.c @@ -753,6 +753,7 @@ static int mlx4_setup_hca(struct mlx4_dev *dev) struct mlx4_priv *priv = mlx4_priv(dev); int err; int port; + __be32 ib_port_default_caps; err = mlx4_init_uar_table(dev); if (err) { @@ -852,6 +853,13 @@ static int mlx4_setup_hca(struct mlx4_dev *dev) } for (port = 1; port <= dev->caps.num_ports; port++) { + ib_port_default_caps = 0; + err = mlx4_get_port_ib_caps(dev, port, &ib_port_default_caps); + if (err) + mlx4_warn(dev, "failed to get port %d default " + "ib capabilities (%d). Continuing with " + "caps = 0\n", port, err); + dev->caps.ib_port_def_cap[port] = ib_port_default_caps; err = mlx4_SET_PORT(dev, port); if (err) { mlx4_err(dev, "Failed to set port %d, aborting\n", diff --git a/drivers/net/mlx4/mlx4.h b/drivers/net/mlx4/mlx4.h index 56a2e213fe62..34c909deaff3 100644 --- a/drivers/net/mlx4/mlx4.h +++ b/drivers/net/mlx4/mlx4.h @@ -385,5 +385,6 @@ void mlx4_init_mac_table(struct mlx4_dev *dev, struct mlx4_mac_table *table); void mlx4_init_vlan_table(struct mlx4_dev *dev, struct mlx4_vlan_table *table); int mlx4_SET_PORT(struct mlx4_dev *dev, u8 port); +int mlx4_get_port_ib_caps(struct mlx4_dev *dev, u8 port, __be32 *caps); #endif /* MLX4_H */ diff --git a/drivers/net/mlx4/port.c b/drivers/net/mlx4/port.c index e2fdab42c4ce..0a057e5dc63b 100644 --- a/drivers/net/mlx4/port.c +++ b/drivers/net/mlx4/port.c @@ -258,6 +258,42 @@ out: } EXPORT_SYMBOL_GPL(mlx4_unregister_vlan); +int mlx4_get_port_ib_caps(struct mlx4_dev *dev, u8 port, __be32 *caps) +{ + struct mlx4_cmd_mailbox *inmailbox, *outmailbox; + u8 *inbuf, *outbuf; + int err; + + inmailbox = mlx4_alloc_cmd_mailbox(dev); + if (IS_ERR(inmailbox)) + return PTR_ERR(inmailbox); + + outmailbox = mlx4_alloc_cmd_mailbox(dev); + if (IS_ERR(outmailbox)) { + mlx4_free_cmd_mailbox(dev, inmailbox); + return PTR_ERR(outmailbox); + } + + inbuf = inmailbox->buf; + outbuf = outmailbox->buf; + memset(inbuf, 0, 256); + memset(outbuf, 0, 256); + inbuf[0] = 1; + inbuf[1] = 1; + inbuf[2] = 1; + inbuf[3] = 1; + *(__be16 *) (&inbuf[16]) = cpu_to_be16(0x0015); + *(__be32 *) (&inbuf[20]) = cpu_to_be32(port); + + err = mlx4_cmd_box(dev, inmailbox->dma, outmailbox->dma, port, 3, + MLX4_CMD_MAD_IFC, MLX4_CMD_TIME_CLASS_C); + if (!err) + *caps = *(__be32 *) (outbuf + 84); + mlx4_free_cmd_mailbox(dev, inmailbox); + mlx4_free_cmd_mailbox(dev, outmailbox); + return err; +} + int mlx4_SET_PORT(struct mlx4_dev *dev, u8 port) { struct mlx4_cmd_mailbox *mailbox; @@ -273,7 +309,8 @@ int mlx4_SET_PORT(struct mlx4_dev *dev, u8 port) ((u8 *) mailbox->buf)[3] = 6; ((__be16 *) mailbox->buf)[4] = cpu_to_be16(1 << 15); ((__be16 *) mailbox->buf)[6] = cpu_to_be16(1 << 15); - } + } else + ((__be32 *) mailbox->buf)[1] = dev->caps.ib_port_def_cap[port]; err = mlx4_cmd(dev, mailbox->dma, port, is_eth, MLX4_CMD_SET_PORT, MLX4_CMD_TIME_CLASS_B); -- cgit v1.2.2 From e6358135147807351db3b7782d3e198a1bba8b62 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Fr=C3=A9d=C3=A9ric=20Moulins?= Date: Fri, 28 Nov 2008 22:12:02 -0800 Subject: pppol2tp: Add missing sock_put() in pppol2tp_release() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit pppol2tp_sock_to_session() do sock_hold() if the session to release is not NULL. Signed-off-by: Frédéric Moulins Signed-off-by: David S. Miller --- drivers/net/pppol2tp.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/pppol2tp.c b/drivers/net/pppol2tp.c index 185b1dff10a8..e98d9773158d 100644 --- a/drivers/net/pppol2tp.c +++ b/drivers/net/pppol2tp.c @@ -1353,6 +1353,7 @@ static int pppol2tp_release(struct socket *sock) kfree_skb(skb); sock_put(sk); } + sock_put(sk); } release_sock(sk); -- cgit v1.2.2 From 43ced651d1272ced02ed5f1c2abc79e3354187f6 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 22 Nov 2008 17:35:34 +0000 Subject: ixgbe section fixes ixgbe_init_interrupt_scheme() is called from ixgbe_resume(). Build that with CONFIG_PM and without CONFIG_HOTPLUG and you've got a problem. Several helpers called by it also are misannotated __devinit. Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/net/ixgbe/ixgbe_main.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 36f2bb666bf7..8ed823ae639e 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -2330,7 +2330,7 @@ static void ixgbe_acquire_msix_vectors(struct ixgbe_adapter *adapter, * Once we know the feature-set enabled for the device, we'll cache * the register offset the descriptor ring is assigned to. **/ -static void __devinit ixgbe_cache_ring_register(struct ixgbe_adapter *adapter) +static void ixgbe_cache_ring_register(struct ixgbe_adapter *adapter) { int feature_mask = 0, rss_i; int i, txr_idx, rxr_idx; @@ -2367,7 +2367,7 @@ static void __devinit ixgbe_cache_ring_register(struct ixgbe_adapter *adapter) * number of queues at compile-time. The polling_netdev array is * intended for Multiqueue, but should work fine with a single queue. **/ -static int __devinit ixgbe_alloc_queues(struct ixgbe_adapter *adapter) +static int ixgbe_alloc_queues(struct ixgbe_adapter *adapter) { int i; @@ -2408,8 +2408,7 @@ err_tx_ring_allocation: * Attempt to configure the interrupts using the best available * capabilities of the hardware and the kernel. **/ -static int __devinit ixgbe_set_interrupt_capability(struct ixgbe_adapter - *adapter) +static int ixgbe_set_interrupt_capability(struct ixgbe_adapter *adapter) { int err = 0; int vector, v_budget; @@ -2501,7 +2500,7 @@ static void ixgbe_reset_interrupt_capability(struct ixgbe_adapter *adapter) * - Hardware queue count (num_*_queues) * - defined by miscellaneous hardware support/features (RSS, etc.) **/ -static int __devinit ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter) +static int ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter) { int err; -- cgit v1.2.2 From 8814b5050d183f00a25a087b550841797c0c2775 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 22 Nov 2008 17:35:44 +0000 Subject: section misannotation in ibmtr_cs ibmtr_resume() is calling ibmtr_probe(), which is devinit. Whether that's the right thing to do there is a separate question, but since it's PCMCIA and thus will never compile without HOTPLUG... Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/net/pcmcia/ibmtr_cs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c index cf3cca4642f2..f51944b28cfa 100644 --- a/drivers/net/pcmcia/ibmtr_cs.c +++ b/drivers/net/pcmcia/ibmtr_cs.c @@ -349,7 +349,7 @@ static int ibmtr_suspend(struct pcmcia_device *link) return 0; } -static int ibmtr_resume(struct pcmcia_device *link) +static int __devinit ibmtr_resume(struct pcmcia_device *link) { ibmtr_dev_t *info = link->priv; struct net_device *dev = info->dev; -- cgit v1.2.2 From f57628d76bd201a444ca822f3622522a44acbf60 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 22 Nov 2008 17:36:14 +0000 Subject: section errors in smc911x/smc91x a) ->probe() can be __devinit; no need to put it into .text b) calling __init stuff from it, OTOH, is wrong c) ->remove() is __devexit fodder Acked-by: rmk+kernel@arm.linux.org.uk Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/net/smc911x.c | 10 +++++----- drivers/net/smc91x.c | 10 +++++----- 2 files changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c index b185cd12269c..9a16a79b67d0 100644 --- a/drivers/net/smc911x.c +++ b/drivers/net/smc911x.c @@ -1735,7 +1735,7 @@ static const struct ethtool_ops smc911x_ethtool_ops = { * This routine has a simple purpose -- make the SMC chip generate an * interrupt, so an auto-detect routine can detect it, and find the IRQ, */ -static int __init smc911x_findirq(struct net_device *dev) +static int __devinit smc911x_findirq(struct net_device *dev) { struct smc911x_local *lp = netdev_priv(dev); int timeout = 20; @@ -1799,7 +1799,7 @@ static int __init smc911x_findirq(struct net_device *dev) * o actually GRAB the irq. * o GRAB the region */ -static int __init smc911x_probe(struct net_device *dev) +static int __devinit smc911x_probe(struct net_device *dev) { struct smc911x_local *lp = netdev_priv(dev); int i, retval; @@ -2048,7 +2048,7 @@ err_out: * 0 --> there is a device * anything else, error */ -static int smc911x_drv_probe(struct platform_device *pdev) +static int __devinit smc911x_drv_probe(struct platform_device *pdev) { #ifdef SMC_DYNAMIC_BUS_CONFIG struct smc911x_platdata *pd = pdev->dev.platform_data; @@ -2124,7 +2124,7 @@ out: return ret; } -static int smc911x_drv_remove(struct platform_device *pdev) +static int __devexit smc911x_drv_remove(struct platform_device *pdev) { struct net_device *ndev = platform_get_drvdata(pdev); struct smc911x_local *lp = netdev_priv(ndev); @@ -2195,7 +2195,7 @@ static int smc911x_drv_resume(struct platform_device *dev) static struct platform_driver smc911x_driver = { .probe = smc911x_drv_probe, - .remove = smc911x_drv_remove, + .remove = __devexit_p(smc911x_drv_remove), .suspend = smc911x_drv_suspend, .resume = smc911x_drv_resume, .driver = { diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c index fc80f250da31..35c56abf4113 100644 --- a/drivers/net/smc91x.c +++ b/drivers/net/smc91x.c @@ -1696,7 +1696,7 @@ static const struct ethtool_ops smc_ethtool_ops = { * I just deleted auto_irq.c, since it was never built... * --jgarzik */ -static int __init smc_findirq(struct smc_local *lp) +static int __devinit smc_findirq(struct smc_local *lp) { void __iomem *ioaddr = lp->base; int timeout = 20; @@ -1770,7 +1770,7 @@ static int __init smc_findirq(struct smc_local *lp) * o actually GRAB the irq. * o GRAB the region */ -static int __init smc_probe(struct net_device *dev, void __iomem *ioaddr, +static int __devinit smc_probe(struct net_device *dev, void __iomem *ioaddr, unsigned long irq_flags) { struct smc_local *lp = netdev_priv(dev); @@ -2126,7 +2126,7 @@ static void smc_release_datacs(struct platform_device *pdev, struct net_device * * 0 --> there is a device * anything else, error */ -static int smc_drv_probe(struct platform_device *pdev) +static int __devinit smc_drv_probe(struct platform_device *pdev) { struct smc91x_platdata *pd = pdev->dev.platform_data; struct smc_local *lp; @@ -2240,7 +2240,7 @@ static int smc_drv_probe(struct platform_device *pdev) return ret; } -static int smc_drv_remove(struct platform_device *pdev) +static int __devexit smc_drv_remove(struct platform_device *pdev) { struct net_device *ndev = platform_get_drvdata(pdev); struct smc_local *lp = netdev_priv(ndev); @@ -2305,7 +2305,7 @@ static int smc_drv_resume(struct platform_device *dev) static struct platform_driver smc_driver = { .probe = smc_drv_probe, - .remove = smc_drv_remove, + .remove = __devexit_p(smc_drv_remove), .suspend = smc_drv_suspend, .resume = smc_drv_resume, .driver = { -- cgit v1.2.2 From ffb78a26169351f6c22cdae481b057d50d5d759b Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 22 Nov 2008 17:38:14 +0000 Subject: get xenbus_driver ->probe() "recognized" by modpost ... by giving the instances' names magic suffix recognized by modpost ;-/ Their ->probe() is __devinit Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/net/xen-netfront.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c index c6948d8f53f6..6d017adc914a 100644 --- a/drivers/net/xen-netfront.c +++ b/drivers/net/xen-netfront.c @@ -1785,7 +1785,7 @@ static int __devexit xennet_remove(struct xenbus_device *dev) return 0; } -static struct xenbus_driver netfront = { +static struct xenbus_driver netfront_driver = { .name = "vif", .owner = THIS_MODULE, .ids = netfront_ids, @@ -1805,7 +1805,7 @@ static int __init netif_init(void) printk(KERN_INFO "Initialising Xen virtual ethernet driver.\n"); - return xenbus_register_frontend(&netfront); + return xenbus_register_frontend(&netfront_driver); } module_init(netif_init); @@ -1815,7 +1815,7 @@ static void __exit netif_exit(void) if (xen_initial_domain()) return; - xenbus_unregister_driver(&netfront); + xenbus_unregister_driver(&netfront_driver); } module_exit(netif_exit); -- cgit v1.2.2 From efba01803c8570bab11d0d6188a630231d0ddccf Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Wed, 3 Dec 2008 00:36:15 -0800 Subject: bnx2: Add workaround to handle missed MSI. The bnx2 chips do not support per MSI vector masking. On 5706/5708, new MSI address/data are stored only when the MSI enable bit is toggled. As a result, SMP affinity no longer works in the latest kernel. A more serious problem is that the driver will no longer receive interrupts when the MSI receiving CPU goes offline. The workaround in this patch only addresses the problem of CPU going offline. When that happens, the driver's timer function will detect that it is making no forward progress on pending interrupt events and will recover from it. Eric Dumazet reported the problem. We also found that if an interrupt is internally asserted while MSI and INTA are disabled, the chip will end up in the same state after MSI is re-enabled. The same workaround is needed for this problem. Signed-off-by: Michael Chan Tested-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/bnx2.c | 35 ++++++++++++++++++++++++++++++++--- drivers/net/bnx2.h | 6 ++++++ 2 files changed, 38 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index d07e3f148951..a1a3d0e5d2b4 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -3144,6 +3144,28 @@ bnx2_has_work(struct bnx2_napi *bnapi) return 0; } +static void +bnx2_chk_missed_msi(struct bnx2 *bp) +{ + struct bnx2_napi *bnapi = &bp->bnx2_napi[0]; + u32 msi_ctrl; + + if (bnx2_has_work(bnapi)) { + msi_ctrl = REG_RD(bp, BNX2_PCICFG_MSI_CONTROL); + if (!(msi_ctrl & BNX2_PCICFG_MSI_CONTROL_ENABLE)) + return; + + if (bnapi->last_status_idx == bp->idle_chk_status_idx) { + REG_WR(bp, BNX2_PCICFG_MSI_CONTROL, msi_ctrl & + ~BNX2_PCICFG_MSI_CONTROL_ENABLE); + REG_WR(bp, BNX2_PCICFG_MSI_CONTROL, msi_ctrl); + bnx2_msi(bp->irq_tbl[0].vector, bnapi); + } + } + + bp->idle_chk_status_idx = bnapi->last_status_idx; +} + static void bnx2_poll_link(struct bnx2 *bp, struct bnx2_napi *bnapi) { struct status_block *sblk = bnapi->status_blk.msi; @@ -3218,14 +3240,15 @@ static int bnx2_poll(struct napi_struct *napi, int budget) work_done = bnx2_poll_work(bp, bnapi, work_done, budget); - if (unlikely(work_done >= budget)) - break; - /* bnapi->last_status_idx is used below to tell the hw how * much work has been processed, so we must read it before * checking for more work. */ bnapi->last_status_idx = sblk->status_idx; + + if (unlikely(work_done >= budget)) + break; + rmb(); if (likely(!bnx2_has_work(bnapi))) { netif_rx_complete(bp->dev, napi); @@ -4570,6 +4593,8 @@ bnx2_init_chip(struct bnx2 *bp) for (i = 0; i < BNX2_MAX_MSIX_VEC; i++) bp->bnx2_napi[i].last_status_idx = 0; + bp->idle_chk_status_idx = 0xffff; + bp->rx_mode = BNX2_EMAC_RX_MODE_SORT_MODE; /* Set up how to generate a link change interrupt. */ @@ -5718,6 +5743,10 @@ bnx2_timer(unsigned long data) if (atomic_read(&bp->intr_sem) != 0) goto bnx2_restart_timer; + if ((bp->flags & (BNX2_FLAG_USING_MSI | BNX2_FLAG_ONE_SHOT_MSI)) == + BNX2_FLAG_USING_MSI) + bnx2_chk_missed_msi(bp); + bnx2_send_heart_beat(bp); bp->stats_blk->stat_FwRxDrop = diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h index 617d95340160..0b032c3c7b61 100644 --- a/drivers/net/bnx2.h +++ b/drivers/net/bnx2.h @@ -378,6 +378,9 @@ struct l2_fhdr { * pci_config_l definition * offset: 0000 */ +#define BNX2_PCICFG_MSI_CONTROL 0x00000058 +#define BNX2_PCICFG_MSI_CONTROL_ENABLE (1L<<16) + #define BNX2_PCICFG_MISC_CONFIG 0x00000068 #define BNX2_PCICFG_MISC_CONFIG_TARGET_BYTE_SWAP (1L<<2) #define BNX2_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP (1L<<3) @@ -6863,6 +6866,9 @@ struct bnx2 { u8 num_tx_rings; u8 num_rx_rings; + + u32 idle_chk_status_idx; + }; #define REG_RD(bp, offset) \ -- cgit v1.2.2 From 5176da7e5318669220e4d2fa856223054a3efc9f Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Tue, 2 Dec 2008 05:07:01 +0000 Subject: enc28j60: Fix sporadic packet loss (corrected again) Packet data read from the RX buffer the when the RSV is at the end of the RX buffer does not warp around. This causes packet loss, as the actual data is never read. Fix this by calculating the right packet data location. Thanks to Shachar Shemesh for suggesting the fix. Signed-off-by: Baruch Siach Acked-by: Claudio Lanconelli Signed-off-by: David S. Miller --- drivers/net/enc28j60.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c index e1b441effbbe..c414554ac321 100644 --- a/drivers/net/enc28j60.c +++ b/drivers/net/enc28j60.c @@ -568,6 +568,17 @@ static u16 erxrdpt_workaround(u16 next_packet_ptr, u16 start, u16 end) return erxrdpt; } +/* + * Calculate wrap around when reading beyond the end of the RX buffer + */ +static u16 rx_packet_start(u16 ptr) +{ + if (ptr + RSV_SIZE > RXEND_INIT) + return (ptr + RSV_SIZE) - (RXEND_INIT - RXSTART_INIT + 1); + else + return ptr + RSV_SIZE; +} + static void nolock_rxfifo_init(struct enc28j60_net *priv, u16 start, u16 end) { u16 erxrdpt; @@ -938,8 +949,9 @@ static void enc28j60_hw_rx(struct net_device *ndev) skb->dev = ndev; skb_reserve(skb, NET_IP_ALIGN); /* copy the packet from the receive buffer */ - enc28j60_mem_read(priv, priv->next_pk_ptr + sizeof(rsv), - len, skb_put(skb, len)); + enc28j60_mem_read(priv, + rx_packet_start(priv->next_pk_ptr), + len, skb_put(skb, len)); if (netif_msg_pktdata(priv)) dump_packet(__func__, skb->len, skb->data); skb->protocol = eth_type_trans(skb, ndev); -- cgit v1.2.2 From 2cc002c4bbce4d918ab94b494d61c6991c907d5e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Wed, 3 Dec 2008 22:18:59 -0800 Subject: netx-eth: initialize per device spinlock MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The spinlock used in the netx-eth driver was never properly initialized. This was noticed using CONFIG_DEBUG_SPINLOCK=y Signed-off-by: Uwe Kleine-König Acked-by: Sascha Hauer Signed-off-by: David S. Miller --- drivers/net/netx-eth.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/netx-eth.c b/drivers/net/netx-eth.c index b9bed82e1d21..b289a0a2b945 100644 --- a/drivers/net/netx-eth.c +++ b/drivers/net/netx-eth.c @@ -401,6 +401,8 @@ static int netx_eth_drv_probe(struct platform_device *pdev) priv->xmac_base = priv->xc->xmac_base; priv->sram_base = priv->xc->sram_base; + spin_lock_init(&priv->lock); + ret = pfifo_request(PFIFO_MASK(priv->id)); if (ret) { printk("unable to request PFIFO\n"); -- cgit v1.2.2 From 40a9a8299116297429298e8fcee08235134883f7 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Tue, 25 Nov 2008 23:29:03 +0200 Subject: iwlwifi: clean key table in iwl_clear_stations_table function This patch cleans uCode key table bit map iwl_clear_stations_table since all stations are cleared also the key table must be. Since the keys are not removed properly on suspend by mac80211 this may result in exhausting key table on resume leading to memory corruption during removal This patch also fixes a memory corruption problem reported in http://marc.info/?l=linux-wireless&m=122641417231586&w=2 and tracked in http://bugzilla.kernel.org/show_bug.cgi?id=12040. When the key is removed a second time the offset is set to 255 - this index is not valid for the ucode_key_table and corrupts the eeprom pointer (which is 255 bits from ucode_key_table). Signed-off-by: Tomas Winkler Signed-off-by: Zhu Yi Reported-by: Carlos R. Mafra Reported-by: Lukas Hejtmanek Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-core.c | 3 +++ drivers/net/wireless/iwlwifi/iwl-sta.c | 24 +++++++++++++++++++++--- 2 files changed, 24 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 4c312c55f90c..01a845851338 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -290,6 +290,9 @@ void iwl_clear_stations_table(struct iwl_priv *priv) priv->num_stations = 0; memset(priv->stations, 0, sizeof(priv->stations)); + /* clean ucode key table bit map */ + priv->ucode_key_table = 0; + spin_unlock_irqrestore(&priv->sta_lock, flags); } EXPORT_SYMBOL(iwl_clear_stations_table); diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c index 61797f3f8d5c..26f7084d3011 100644 --- a/drivers/net/wireless/iwlwifi/iwl-sta.c +++ b/drivers/net/wireless/iwlwifi/iwl-sta.c @@ -475,7 +475,7 @@ static int iwl_get_free_ucode_key_index(struct iwl_priv *priv) if (!test_and_set_bit(i, &priv->ucode_key_table)) return i; - return -1; + return WEP_INVALID_OFFSET; } int iwl_send_static_wepkey_cmd(struct iwl_priv *priv, u8 send_if_empty) @@ -620,6 +620,9 @@ static int iwl_set_wep_dynamic_key_info(struct iwl_priv *priv, /* else, we are overriding an existing key => no need to allocated room * in uCode. */ + WARN(priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET, + "no space for new kew"); + priv->stations[sta_id].sta.key.key_flags = key_flags; priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; @@ -637,6 +640,7 @@ static int iwl_set_ccmp_dynamic_key_info(struct iwl_priv *priv, { unsigned long flags; __le16 key_flags = 0; + int ret; key_flags |= (STA_KEY_FLG_CCMP | STA_KEY_FLG_MAP_KEY_MSK); key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS); @@ -664,14 +668,18 @@ static int iwl_set_ccmp_dynamic_key_info(struct iwl_priv *priv, /* else, we are overriding an existing key => no need to allocated room * in uCode. */ + WARN(priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET, + "no space for new kew"); + priv->stations[sta_id].sta.key.key_flags = key_flags; priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; + ret = iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC); + spin_unlock_irqrestore(&priv->sta_lock, flags); - IWL_DEBUG_INFO("hwcrypto: modify ucode station key info\n"); - return iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC); + return ret; } static int iwl_set_tkip_dynamic_key_info(struct iwl_priv *priv, @@ -696,6 +704,9 @@ static int iwl_set_tkip_dynamic_key_info(struct iwl_priv *priv, /* else, we are overriding an existing key => no need to allocated room * in uCode. */ + WARN(priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET, + "no space for new kew"); + /* This copy is acutally not needed: we get the key with each TX */ memcpy(priv->stations[sta_id].keyinfo.key, keyconf->key, 16); @@ -734,6 +745,13 @@ int iwl_remove_dynamic_key(struct iwl_priv *priv, return 0; } + if (priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET) { + IWL_WARNING("Removing wrong key %d 0x%x\n", + keyconf->keyidx, key_flags); + spin_unlock_irqrestore(&priv->sta_lock, flags); + return 0; + } + if (!test_and_clear_bit(priv->stations[sta_id].sta.key.key_offset, &priv->ucode_key_table)) IWL_ERROR("index %d not used in uCode key table.\n", -- cgit v1.2.2 From b8ddafd759e356c839774a8b87011b768deb53b3 Mon Sep 17 00:00:00 2001 From: Zhu Yi Date: Thu, 27 Nov 2008 13:42:20 +0800 Subject: ipw2200: fix netif_*_queue() removal regression In "ipw2200: Call netif_*_queue() interfaces properly", netif_stop_queue() and netif_wake_queue() were removed with the reason "netif_carrier_{on,off}() handles starting and stopping packet flow into the driver". The patch also removes a valid condition check that ipw_tx_skb() cannot be called if device is not in STATUS_ASSOCIATED state. But netif_carrier_off() doesn't guarantee netdev->hard_start_xmit won't be called because linkwatch event is handled in a delayed workqueue. This caused a kernel oops reported by Frank Seidel: https://bugzilla.novell.com/show_bug.cgi?id=397390 This patch fixes the problem by moving the STATUS_ASSOCIATED check back to ipw_tx_skb(). It also adds a missing netif_carrier_off() call to ipw_disassociate(). Signed-off-by: Zhu Yi Signed-off-by: Chatre, Reinette Tested-by: Frank Seidel Signed-off-by: John W. Linville --- drivers/net/wireless/ipw2200.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c index dcce3542d5a7..7a9f901d4ff6 100644 --- a/drivers/net/wireless/ipw2200.c +++ b/drivers/net/wireless/ipw2200.c @@ -3897,6 +3897,7 @@ static int ipw_disassociate(void *data) if (!(priv->status & (STATUS_ASSOCIATED | STATUS_ASSOCIATING))) return 0; ipw_send_disassociate(data, 0); + netif_carrier_off(priv->net_dev); return 1; } @@ -10190,6 +10191,9 @@ static int ipw_tx_skb(struct ipw_priv *priv, struct ieee80211_txb *txb, u16 remaining_bytes; int fc; + if (!(priv->status & STATUS_ASSOCIATED)) + goto drop; + hdr_len = ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl)); switch (priv->ieee->iw_mode) { case IW_MODE_ADHOC: -- cgit v1.2.2 From cde6901b7b69557a6f90f3183f76eda581af015e Mon Sep 17 00:00:00 2001 From: Shaddy Baddah Date: Fri, 28 Nov 2008 17:10:45 +1100 Subject: zd1211rw: use unaligned safe memcmp() in-place of compare_ether_addr() Under my 2.6.28-rc6 sparc64, when associating to an AP through my zd1211rw device, I was seeing kernel log messages like (not exact output): Kernel unaligned access at TPC[10129b68] zd_mac_rx+0x144/0x32c [zd1211rw] For the zd1211rw module, on RX, the 80211 packet will be located after the PLCP header in the skb data buffer. The PLCP header being 5 bytes long, the 80211 header will start unaligned from an aligned skb buffer. As per Documentation/unaligned-memory-access.txt, we must replace the not unaligned() safe compare_ether_addr() with memcmp() to protect architectures that require alignment. Signed-off-by: Shaddy Baddah Signed-off-by: John W. Linville --- drivers/net/wireless/zd1211rw/zd_mac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c index fe1867b25ff7..cac732f4047f 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.c +++ b/drivers/net/wireless/zd1211rw/zd_mac.c @@ -615,7 +615,7 @@ static int filter_ack(struct ieee80211_hw *hw, struct ieee80211_hdr *rx_hdr, struct ieee80211_hdr *tx_hdr; tx_hdr = (struct ieee80211_hdr *)skb->data; - if (likely(!compare_ether_addr(tx_hdr->addr2, rx_hdr->addr1))) + if (likely(!memcmp(tx_hdr->addr2, rx_hdr->addr1, ETH_ALEN))) { __skb_unlink(skb, q); tx_status(hw, skb, IEEE80211_TX_STAT_ACK, stats->signal, 1); -- cgit v1.2.2 From 8c83f80b2d335176f72d8729fe1dfe19c5812cb1 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 9 Dec 2008 00:10:11 -0800 Subject: sungem: Make PCS PHY support partially work again. As reported by Hermann Lauer, PCS PHY support in the sungem driver simply doesn't work. When the chip is reset due to open, or some other similar operation, the PCS is reset too but we don't program it back into a running state. The result is no link when the device is brought up. This partially rectifies the situation for the moment, by kicking the PCS after a sungem chip reset so that it will renegotiate and be re-enabled again. The behavior is still a little bit dodgy as the added renegotiate make the link take some time after bringing the interface up, but this is a significant improvement in that things actually work now :-) Based almost entirely upon an initial patch by Hermann. Signed-off-by: David S. Miller --- drivers/net/sungem.c | 129 +++++++++++++++++++++++++++++---------------------- 1 file changed, 73 insertions(+), 56 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c index 1349e419673c..bb7a47829f7f 100644 --- a/drivers/net/sungem.c +++ b/drivers/net/sungem.c @@ -1142,6 +1142,70 @@ static int gem_start_xmit(struct sk_buff *skb, struct net_device *dev) return NETDEV_TX_OK; } +static void gem_pcs_reset(struct gem *gp) +{ + int limit; + u32 val; + + /* Reset PCS unit. */ + val = readl(gp->regs + PCS_MIICTRL); + val |= PCS_MIICTRL_RST; + writel(val, gp->regs + PCS_MIICTRL); + + limit = 32; + while (readl(gp->regs + PCS_MIICTRL) & PCS_MIICTRL_RST) { + udelay(100); + if (limit-- <= 0) + break; + } + if (limit <= 0) + printk(KERN_WARNING "%s: PCS reset bit would not clear.\n", + gp->dev->name); +} + +static void gem_pcs_reinit_adv(struct gem *gp) +{ + u32 val; + + /* Make sure PCS is disabled while changing advertisement + * configuration. + */ + val = readl(gp->regs + PCS_CFG); + val &= ~(PCS_CFG_ENABLE | PCS_CFG_TO); + writel(val, gp->regs + PCS_CFG); + + /* Advertise all capabilities except assymetric + * pause. + */ + val = readl(gp->regs + PCS_MIIADV); + val |= (PCS_MIIADV_FD | PCS_MIIADV_HD | + PCS_MIIADV_SP | PCS_MIIADV_AP); + writel(val, gp->regs + PCS_MIIADV); + + /* Enable and restart auto-negotiation, disable wrapback/loopback, + * and re-enable PCS. + */ + val = readl(gp->regs + PCS_MIICTRL); + val |= (PCS_MIICTRL_RAN | PCS_MIICTRL_ANE); + val &= ~PCS_MIICTRL_WB; + writel(val, gp->regs + PCS_MIICTRL); + + val = readl(gp->regs + PCS_CFG); + val |= PCS_CFG_ENABLE; + writel(val, gp->regs + PCS_CFG); + + /* Make sure serialink loopback is off. The meaning + * of this bit is logically inverted based upon whether + * you are in Serialink or SERDES mode. + */ + val = readl(gp->regs + PCS_SCTRL); + if (gp->phy_type == phy_serialink) + val &= ~PCS_SCTRL_LOOP; + else + val |= PCS_SCTRL_LOOP; + writel(val, gp->regs + PCS_SCTRL); +} + #define STOP_TRIES 32 /* Must be invoked under gp->lock and gp->tx_lock. */ @@ -1168,6 +1232,9 @@ static void gem_reset(struct gem *gp) if (limit <= 0) printk(KERN_ERR "%s: SW reset is ghetto.\n", gp->dev->name); + + if (gp->phy_type == phy_serialink || gp->phy_type == phy_serdes) + gem_pcs_reinit_adv(gp); } /* Must be invoked under gp->lock and gp->tx_lock. */ @@ -1324,7 +1391,7 @@ static int gem_set_link_modes(struct gem *gp) gp->phy_type == phy_serdes) { u32 pcs_lpa = readl(gp->regs + PCS_MIILP); - if (pcs_lpa & PCS_MIIADV_FD) + if ((pcs_lpa & PCS_MIIADV_FD) || gp->phy_type == phy_serdes) full_duplex = 1; speed = SPEED_1000; } @@ -1488,6 +1555,9 @@ static void gem_link_timer(unsigned long data) val = readl(gp->regs + PCS_MIISTAT); if ((val & PCS_MIISTAT_LS) != 0) { + if (gp->lstate == link_up) + goto restart; + gp->lstate = link_up; netif_carrier_on(gp->dev); (void)gem_set_link_modes(gp); @@ -1708,61 +1778,8 @@ static void gem_init_phy(struct gem *gp) if (gp->phy_mii.def && gp->phy_mii.def->ops->init) gp->phy_mii.def->ops->init(&gp->phy_mii); } else { - u32 val; - int limit; - - /* Reset PCS unit. */ - val = readl(gp->regs + PCS_MIICTRL); - val |= PCS_MIICTRL_RST; - writel(val, gp->regs + PCS_MIICTRL); - - limit = 32; - while (readl(gp->regs + PCS_MIICTRL) & PCS_MIICTRL_RST) { - udelay(100); - if (limit-- <= 0) - break; - } - if (limit <= 0) - printk(KERN_WARNING "%s: PCS reset bit would not clear.\n", - gp->dev->name); - - /* Make sure PCS is disabled while changing advertisement - * configuration. - */ - val = readl(gp->regs + PCS_CFG); - val &= ~(PCS_CFG_ENABLE | PCS_CFG_TO); - writel(val, gp->regs + PCS_CFG); - - /* Advertise all capabilities except assymetric - * pause. - */ - val = readl(gp->regs + PCS_MIIADV); - val |= (PCS_MIIADV_FD | PCS_MIIADV_HD | - PCS_MIIADV_SP | PCS_MIIADV_AP); - writel(val, gp->regs + PCS_MIIADV); - - /* Enable and restart auto-negotiation, disable wrapback/loopback, - * and re-enable PCS. - */ - val = readl(gp->regs + PCS_MIICTRL); - val |= (PCS_MIICTRL_RAN | PCS_MIICTRL_ANE); - val &= ~PCS_MIICTRL_WB; - writel(val, gp->regs + PCS_MIICTRL); - - val = readl(gp->regs + PCS_CFG); - val |= PCS_CFG_ENABLE; - writel(val, gp->regs + PCS_CFG); - - /* Make sure serialink loopback is off. The meaning - * of this bit is logically inverted based upon whether - * you are in Serialink or SERDES mode. - */ - val = readl(gp->regs + PCS_SCTRL); - if (gp->phy_type == phy_serialink) - val &= ~PCS_SCTRL_LOOP; - else - val |= PCS_SCTRL_LOOP; - writel(val, gp->regs + PCS_SCTRL); + gem_pcs_reset(gp); + gem_pcs_reinit_adv(gp); } /* Default aneg parameters */ -- cgit v1.2.2 From fbf0229e946deb9e6c711f9eaa5c8d670c3a28fd Mon Sep 17 00:00:00 2001 From: Hermann Lauer Date: Tue, 9 Dec 2008 15:39:14 -0800 Subject: sungem: improve ethtool output with internal pcs and serdes From: Hermann Lauer Attached is a patch which improves the output of ethtool (see below) to some sensefull values with a sungem fibre card which uses the sungem interal pcs connected to a serdes chip. The seriallink case in the driver is untouched. Most values are hardcoded, because gigabit fibre autoneg is anyways limited and the driver don't really support much at the moment with that hardware. Signed-off-by: David S. Miller --- drivers/net/sungem.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c index bb7a47829f7f..fed7eba65ead 100644 --- a/drivers/net/sungem.c +++ b/drivers/net/sungem.c @@ -2697,6 +2697,21 @@ static int gem_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) cmd->speed = 0; cmd->duplex = cmd->port = cmd->phy_address = cmd->transceiver = cmd->autoneg = 0; + + /* serdes means usually a Fibre connector, with most fixed */ + if (gp->phy_type == phy_serdes) { + cmd->port = PORT_FIBRE; + cmd->supported = (SUPPORTED_1000baseT_Half | + SUPPORTED_1000baseT_Full | + SUPPORTED_FIBRE | SUPPORTED_Autoneg | + SUPPORTED_Pause | SUPPORTED_Asym_Pause); + cmd->advertising = cmd->supported; + cmd->transceiver = XCVR_INTERNAL; + if (gp->lstate == link_up) + cmd->speed = SPEED_1000; + cmd->duplex = DUPLEX_FULL; + cmd->autoneg = 1; + } } cmd->maxtxpkt = cmd->maxrxpkt = 0; -- cgit v1.2.2 From 30bb0e0dce78427f3e5cb728d6b5ea73acbefffa Mon Sep 17 00:00:00 2001 From: Jeff Kirsher Date: Thu, 11 Dec 2008 21:28:11 -0800 Subject: e1000e: fix double release of mutex During a reset, releasing the swflag after it failed to be acquired would cause a double unlock of the mutex. Instead, test whether acquisition of the swflag was successful and if not, do not release the swflag. The reset must still be done to bring the device to a quiescent state. This resolves [BUG 12200] BUG: bad unlock balance detected! e1000e http://bugzilla.kernel.org/show_bug.cgi?id=12200 Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/ich8lan.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 523b9716a543..d115a6d30f29 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -1893,12 +1893,17 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) ctrl |= E1000_CTRL_PHY_RST; } ret_val = e1000_acquire_swflag_ich8lan(hw); + /* Whether or not the swflag was acquired, we need to reset the part */ hw_dbg(hw, "Issuing a global reset to ich8lan"); ew32(CTRL, (ctrl | E1000_CTRL_RST)); msleep(20); - /* release the swflag because it is not reset by hardware reset */ - e1000_release_swflag_ich8lan(hw); + if (!ret_val) { + /* release the swflag because it is not reset by + * hardware reset + */ + e1000_release_swflag_ich8lan(hw); + } ret_val = e1000e_get_auto_rd_done(hw); if (ret_val) { -- cgit v1.2.2