From 987cdcba62da369d41f61bb1026d40d670c4efe6 Mon Sep 17 00:00:00 2001
From: Julien Massot <jmassot@aldebaran-robotics.com>
Date: Mon, 6 Jan 2014 19:52:47 +0100
Subject: ath6kl: increase usb rx buffer size to 4096

With the previous value (1700), some urb are dropped
with a babble error (urb status equal -EOVERFLOW).

These error seems to only happen when urb length is a
multiple of packet size (512).

Signed-off-by: Julien Massot <jmassot@aldebaran-robotics.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath6kl/usb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath6kl/usb.c b/drivers/net/wireless/ath/ath6kl/usb.c
index f38ff6a6255e..bbaf867c7d14 100644
--- a/drivers/net/wireless/ath/ath6kl/usb.c
+++ b/drivers/net/wireless/ath/ath6kl/usb.c
@@ -24,7 +24,7 @@
 /* constants */
 #define TX_URB_COUNT            32
 #define RX_URB_COUNT            32
-#define ATH6KL_USB_RX_BUFFER_SIZE  1700
+#define ATH6KL_USB_RX_BUFFER_SIZE  4096
 
 /* tx/rx pipes for usb */
 enum ATH6KL_USB_PIPE_ID {
-- 
cgit v1.2.2


From 61118fbf5ba01a88d7f7b2210f44b6278f4a597f Mon Sep 17 00:00:00 2001
From: Julien Massot <jmassot@aldebaran-robotics.com>
Date: Mon, 6 Jan 2014 19:52:48 +0100
Subject: ath6kl: set rx urb count threshold to 1

Reduce the Rx count threshold to make sure we read
the available credits for Tx.

Signed-off-by: Julien Massot <jmassot@aldebaran-robotics.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath6kl/usb.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath6kl/usb.c b/drivers/net/wireless/ath/ath6kl/usb.c
index bbaf867c7d14..56c3fd5cef65 100644
--- a/drivers/net/wireless/ath/ath6kl/usb.c
+++ b/drivers/net/wireless/ath/ath6kl/usb.c
@@ -481,8 +481,8 @@ static void ath6kl_usb_start_recv_pipes(struct ath6kl_usb *ar_usb)
 	 *		ATH6KL_USB_RX_BUFFER_SIZE);
 	 */
 
-	ar_usb->pipes[ATH6KL_USB_PIPE_RX_DATA].urb_cnt_thresh =
-	    ar_usb->pipes[ATH6KL_USB_PIPE_RX_DATA].urb_alloc / 2;
+	ar_usb->pipes[ATH6KL_USB_PIPE_RX_DATA].urb_cnt_thresh = 1;
+
 	ath6kl_usb_post_recv_transfers(&ar_usb->pipes[ATH6KL_USB_PIPE_RX_DATA],
 				       ATH6KL_USB_RX_BUFFER_SIZE);
 }
-- 
cgit v1.2.2


From 542fb17400a752c4be2e221857a42f35acc1a1cc Mon Sep 17 00:00:00 2001
From: Janusz Dziedzic <janusz.dziedzic@tieto.com>
Date: Fri, 17 Jan 2014 14:08:08 +0100
Subject: ath10k: enable wmi ps peer param command for 10.x FW

Enable ap_ps_peer_param_cmdid for 10.x FW.
This is used mainly for AP UAPSD.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/wmi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 712a606a080a..f49a84276b9b 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -213,7 +213,7 @@ static struct wmi_cmd_map wmi_10x_cmd_map = {
 	.p2p_go_set_beacon_ie = WMI_10X_P2P_GO_SET_BEACON_IE,
 	.p2p_go_set_probe_resp_ie = WMI_10X_P2P_GO_SET_PROBE_RESP_IE,
 	.p2p_set_vendor_ie_data_cmdid = WMI_CMD_UNSUPPORTED,
-	.ap_ps_peer_param_cmdid = WMI_CMD_UNSUPPORTED,
+	.ap_ps_peer_param_cmdid = WMI_10X_AP_PS_PEER_PARAM_CMDID,
 	.ap_ps_peer_uapsd_coex_cmdid = WMI_CMD_UNSUPPORTED,
 	.peer_rate_retry_sched_cmdid = WMI_10X_PEER_RATE_RETRY_SCHED_CMDID,
 	.wlan_profile_trigger_cmdid = WMI_10X_WLAN_PROFILE_TRIGGER_CMDID,
-- 
cgit v1.2.2


From 5a13e76eca17212c0a4ad3c1fb97df8a9e9921d8 Mon Sep 17 00:00:00 2001
From: Kalle Valo <kvalo@qca.qualcomm.com>
Date: Mon, 20 Jan 2014 11:01:46 +0200
Subject: ath10k: enable firmware STA quick kickout

Firmware has a feature to track if the associated STA is not acking the frames.
When that happens, the firmware sends WMI_PEER_STA_KICKOUT_EVENTID event to the
host. Enable that to faster detect when a STA has left BSS without sending a
deauth frame.

Also set huge keepalive timeouts to avoid using the keepalive functionality in
the firmware.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/core.h | 12 +++++++
 drivers/net/wireless/ath/ath10k/mac.c  | 58 ++++++++++++++++++++++++++++++----
 drivers/net/wireless/ath/ath10k/wmi.c  | 22 ++++++++++++-
 drivers/net/wireless/ath/ath10k/wmi.h  |  4 +++
 4 files changed, 88 insertions(+), 8 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index ade1781c7186..e6308f420a5c 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -46,6 +46,18 @@
 
 #define ATH10K_MAX_NUM_MGMT_PENDING 128
 
+/* number of failed packets */
+#define ATH10K_KICKOUT_THRESHOLD 50
+
+/*
+ * Use insanely high numbers to make sure that the firmware implementation
+ * won't start, we have the same functionality already in hostapd. Unit
+ * is seconds.
+ */
+#define ATH10K_KEEPALIVE_MIN_IDLE 3747
+#define ATH10K_KEEPALIVE_MAX_IDLE 3895
+#define ATH10K_KEEPALIVE_MAX_UNRESPONSIVE 3900
+
 struct ath10k;
 
 struct ath10k_skb_cb {
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 776e364eadcd..5269cf8f2d78 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -339,6 +339,50 @@ static int ath10k_peer_create(struct ath10k *ar, u32 vdev_id, const u8 *addr)
 	return 0;
 }
 
+static int ath10k_mac_set_kickout(struct ath10k_vif *arvif)
+{
+	struct ath10k *ar = arvif->ar;
+	u32 param;
+	int ret;
+
+	param = ar->wmi.pdev_param->sta_kickout_th;
+	ret = ath10k_wmi_pdev_set_param(ar, param,
+					ATH10K_KICKOUT_THRESHOLD);
+	if (ret) {
+		ath10k_warn("Failed to set kickout threshold: %d\n", ret);
+		return ret;
+	}
+
+	param = ar->wmi.vdev_param->ap_keepalive_min_idle_inactive_time_secs;
+	ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, param,
+					ATH10K_KEEPALIVE_MIN_IDLE);
+	if (ret) {
+		ath10k_warn("Failed to set keepalive minimum idle time : %d\n",
+			    ret);
+		return ret;
+	}
+
+	param = ar->wmi.vdev_param->ap_keepalive_max_idle_inactive_time_secs;
+	ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, param,
+					ATH10K_KEEPALIVE_MAX_IDLE);
+	if (ret) {
+		ath10k_warn("Failed to set keepalive maximum idle time: %d\n",
+			    ret);
+		return ret;
+	}
+
+	param = ar->wmi.vdev_param->ap_keepalive_max_unresponsive_time_secs;
+	ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, param,
+					ATH10K_KEEPALIVE_MAX_UNRESPONSIVE);
+	if (ret) {
+		ath10k_warn("Failed to set keepalive maximum unresponsive time: %d\n",
+			    ret);
+		return ret;
+	}
+
+	return 0;
+}
+
 static int  ath10k_mac_set_rts(struct ath10k_vif *arvif, u32 value)
 {
 	struct ath10k *ar = arvif->ar;
@@ -2214,7 +2258,7 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
 	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
 	enum wmi_sta_powersave_param param;
 	int ret = 0;
-	u32 value, param_id;
+	u32 value;
 	int bit;
 	u32 vdev_param;
 
@@ -2307,12 +2351,12 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
 			goto err_vdev_delete;
 		}
 
-		param_id = ar->wmi.pdev_param->sta_kickout_th;
-
-		/* Disable STA KICKOUT functionality in FW */
-		ret = ath10k_wmi_pdev_set_param(ar, param_id, 0);
-		if (ret)
-			ath10k_warn("Failed to disable STA KICKOUT\n");
+		ret = ath10k_mac_set_kickout(arvif);
+		if (ret) {
+			ath10k_warn("Failed to set kickout parameters: %d\n",
+				    ret);
+			goto err_peer_delete;
+		}
 	}
 
 	if (arvif->vdev_type == WMI_VDEV_TYPE_STA) {
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index f49a84276b9b..f0969cd8350f 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -1116,7 +1116,27 @@ static void ath10k_wmi_event_vdev_stopped(struct ath10k *ar,
 static void ath10k_wmi_event_peer_sta_kickout(struct ath10k *ar,
 					      struct sk_buff *skb)
 {
-	ath10k_dbg(ATH10K_DBG_WMI, "WMI_PEER_STA_KICKOUT_EVENTID\n");
+	struct wmi_peer_sta_kickout_event *ev;
+	struct ieee80211_sta *sta;
+
+	ev = (struct wmi_peer_sta_kickout_event *)skb->data;
+
+	ath10k_dbg(ATH10K_DBG_WMI, "wmi event peer sta kickout %pM\n",
+		   ev->peer_macaddr.addr);
+
+	rcu_read_lock();
+
+	sta = ieee80211_find_sta_by_ifaddr(ar->hw, ev->peer_macaddr.addr, NULL);
+	if (!sta) {
+		ath10k_warn("Spurious quick kickout for STA %pM\n",
+			    ev->peer_macaddr.addr);
+		goto exit;
+	}
+
+	ieee80211_report_low_ack(sta, 10);
+
+exit:
+	rcu_read_unlock();
 }
 
 /*
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 4b5e7d3d32b6..9dc90c5dd0e4 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -4039,6 +4039,10 @@ struct wmi_chan_info_event {
 	__le32 cycle_count;
 } __packed;
 
+struct wmi_peer_sta_kickout_event {
+	struct wmi_mac_addr peer_macaddr;
+} __packed;
+
 #define WMI_CHAN_INFO_FLAG_COMPLETE BIT(0)
 
 /* FIXME: empirically extrapolated */
-- 
cgit v1.2.2


From d3d3ff42d9b3a8b90b381ebb398deb5c87ec1692 Mon Sep 17 00:00:00 2001
From: Janusz Dziedzic <janusz.dziedzic@tieto.com>
Date: Tue, 21 Jan 2014 07:06:53 +0100
Subject: ath10k: AP mode, set UAPSD params correctly

ath10k handles UAPSD completly in the firmware.
When works in AP mode we have to configure
UAPSD params for each station. Without this
patch we configure UAPSD params before we
send peer assoc command to the FW, which was
wrong. Next FW didn't know what should be trigger
frame, couse UAPSD didn't work correctly in AP mode.
To configure UAPSD params correctly we have to
send them after peer assoc command.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/mac.c | 80 ++++++++++++++++++++---------------
 1 file changed, 46 insertions(+), 34 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 5269cf8f2d78..bff0871fa6bd 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -1136,27 +1136,20 @@ static void ath10k_peer_assoc_h_ht(struct ath10k *ar,
 		   arg->peer_num_spatial_streams);
 }
 
-static void ath10k_peer_assoc_h_qos_ap(struct ath10k *ar,
-				       struct ath10k_vif *arvif,
-				       struct ieee80211_sta *sta,
-				       struct ieee80211_bss_conf *bss_conf,
-				       struct wmi_peer_assoc_complete_arg *arg)
+static int ath10k_peer_assoc_qos_ap(struct ath10k *ar,
+				    struct ath10k_vif *arvif,
+				    struct ieee80211_sta *sta)
 {
 	u32 uapsd = 0;
 	u32 max_sp = 0;
+	int ret = 0;
 
 	lockdep_assert_held(&ar->conf_mutex);
 
-	if (sta->wme)
-		arg->peer_flags |= WMI_PEER_QOS;
-
 	if (sta->wme && sta->uapsd_queues) {
 		ath10k_dbg(ATH10K_DBG_MAC, "mac uapsd_queues 0x%x max_sp %d\n",
 			   sta->uapsd_queues, sta->max_sp);
 
-		arg->peer_flags |= WMI_PEER_APSD;
-		arg->peer_rate_caps |= WMI_RC_UAPSD_FLAG;
-
 		if (sta->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VO)
 			uapsd |= WMI_AP_PS_UAPSD_AC3_DELIVERY_EN |
 				 WMI_AP_PS_UAPSD_AC3_TRIGGER_EN;
@@ -1174,35 +1167,40 @@ static void ath10k_peer_assoc_h_qos_ap(struct ath10k *ar,
 		if (sta->max_sp < MAX_WMI_AP_PS_PEER_PARAM_MAX_SP)
 			max_sp = sta->max_sp;
 
-		ath10k_wmi_set_ap_ps_param(ar, arvif->vdev_id,
-					   sta->addr,
-					   WMI_AP_PS_PEER_PARAM_UAPSD,
-					   uapsd);
+		ret = ath10k_wmi_set_ap_ps_param(ar, arvif->vdev_id,
+						 sta->addr,
+						 WMI_AP_PS_PEER_PARAM_UAPSD,
+						 uapsd);
+		if (ret) {
+			ath10k_warn("failed to set ap ps peer param uapsd: %d\n",
+				    ret);
+			return ret;
+		}
 
-		ath10k_wmi_set_ap_ps_param(ar, arvif->vdev_id,
-					   sta->addr,
-					   WMI_AP_PS_PEER_PARAM_MAX_SP,
-					   max_sp);
+		ret = ath10k_wmi_set_ap_ps_param(ar, arvif->vdev_id,
+						 sta->addr,
+						 WMI_AP_PS_PEER_PARAM_MAX_SP,
+						 max_sp);
+		if (ret) {
+			ath10k_warn("failed to set ap ps peer param max sp: %d\n",
+				    ret);
+			return ret;
+		}
 
 		/* TODO setup this based on STA listen interval and
 		   beacon interval. Currently we don't know
 		   sta->listen_interval - mac80211 patch required.
 		   Currently use 10 seconds */
-		ath10k_wmi_set_ap_ps_param(ar, arvif->vdev_id,
-					   sta->addr,
-					   WMI_AP_PS_PEER_PARAM_AGEOUT_TIME,
-					   10);
+		ret = ath10k_wmi_set_ap_ps_param(ar, arvif->vdev_id, sta->addr,
+					WMI_AP_PS_PEER_PARAM_AGEOUT_TIME, 10);
+		if (ret) {
+			ath10k_warn("failed to set ap ps peer param ageout time: %d\n",
+				    ret);
+			return ret;
+		}
 	}
-}
 
-static void ath10k_peer_assoc_h_qos_sta(struct ath10k *ar,
-					struct ath10k_vif *arvif,
-					struct ieee80211_sta *sta,
-					struct ieee80211_bss_conf *bss_conf,
-					struct wmi_peer_assoc_complete_arg *arg)
-{
-	if (bss_conf->qos)
-		arg->peer_flags |= WMI_PEER_QOS;
+	return 0;
 }
 
 static void ath10k_peer_assoc_h_vht(struct ath10k *ar,
@@ -1255,10 +1253,17 @@ static void ath10k_peer_assoc_h_qos(struct ath10k *ar,
 {
 	switch (arvif->vdev_type) {
 	case WMI_VDEV_TYPE_AP:
-		ath10k_peer_assoc_h_qos_ap(ar, arvif, sta, bss_conf, arg);
+		if (sta->wme)
+			arg->peer_flags |= WMI_PEER_QOS;
+
+		if (sta->wme && sta->uapsd_queues) {
+			arg->peer_flags |= WMI_PEER_APSD;
+			arg->peer_rate_caps |= WMI_RC_UAPSD_FLAG;
+		}
 		break;
 	case WMI_VDEV_TYPE_STA:
-		ath10k_peer_assoc_h_qos_sta(ar, arvif, sta, bss_conf, arg);
+		if (bss_conf->qos)
+			arg->peer_flags |= WMI_PEER_QOS;
 		break;
 	default:
 		break;
@@ -1456,6 +1461,13 @@ static int ath10k_station_assoc(struct ath10k *ar, struct ath10k_vif *arvif,
 		return ret;
 	}
 
+	ret = ath10k_peer_assoc_qos_ap(ar, arvif, sta);
+	if (ret) {
+		ath10k_warn("could not set qos params for STA %pM, %d\n",
+			    sta->addr, ret);
+		return ret;
+	}
+
 	return ret;
 }
 
-- 
cgit v1.2.2


From 5ba88b395cb447af756d12411456024d65a07814 Mon Sep 17 00:00:00 2001
From: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
Date: Tue, 21 Jan 2014 17:21:21 +0800
Subject: ath10k: fix the printing of 10.x FW version when FW crashed

10.x FW has no structure member sw_version_1. Thus,
both fw_version_release and fw_version_build are not
available. The provided fw_version_major is also wrong.
Fix this by using the fw_version from struct wiphy.

Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/pci.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 29fd197d1fd8..9179c88007d1 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -833,9 +833,7 @@ static void ath10k_pci_hif_dump_area(struct ath10k *ar)
 	ath10k_err("firmware crashed!\n");
 	ath10k_err("hardware name %s version 0x%x\n",
 		   ar->hw_params.name, ar->target_version);
-	ath10k_err("firmware version: %u.%u.%u.%u\n", ar->fw_version_major,
-		   ar->fw_version_minor, ar->fw_version_release,
-		   ar->fw_version_build);
+	ath10k_err("firmware version: %s\n", ar->hw->wiphy->fw_version);
 
 	host_addr = host_interest_item_address(HI_ITEM(hi_failure_state));
 	ret = ath10k_pci_diag_read_mem(ar, host_addr,
-- 
cgit v1.2.2


From c930f744bdb0774ccf7c00e23637f54b8e71f0b6 Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Thu, 23 Jan 2014 11:38:25 +0100
Subject: ath10k: implement channel switching

Until now channel change wasn't propagating to FW
directly because operational channel is abstracted
by VDEVs and it wasn't really necessary since
ath10k implements hwscan and hwroc.

This effectively fixes STA CSA and allows for
future AP-like CSA as well.

kvalo: change error handling in ath10k_bss_info_changed()

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/core.h |  12 ++-
 drivers/net/wireless/ath/ath10k/mac.c  | 174 ++++++++++++++++++++++++++++-----
 2 files changed, 156 insertions(+), 30 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index e6308f420a5c..8b145209d37d 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -238,6 +238,11 @@ struct ath10k_vif {
 	struct ath10k *ar;
 	struct ieee80211_vif *vif;
 
+	bool is_started;
+	bool is_up;
+	u32 aid;
+	u8 bssid[ETH_ALEN];
+
 	struct work_struct wep_key_work;
 	struct ieee80211_key_conf *wep_keys[WMI_MAX_KEY_INDEX + 1];
 	u8 def_wep_key_idx;
@@ -247,7 +252,6 @@ struct ath10k_vif {
 
 	union {
 		struct {
-			u8 bssid[ETH_ALEN];
 			u32 uapsd;
 		} sta;
 		struct {
@@ -261,9 +265,6 @@ struct ath10k_vif {
 			u32 noa_len;
 			u8 *noa_data;
 		} ap;
-		struct {
-			u8 bssid[ETH_ALEN];
-		} ibss;
 	} u;
 
 	u8 fixed_rate;
@@ -424,6 +425,9 @@ struct ath10k {
 	/* valid during scan; needed for mgmt rx during scan */
 	struct ieee80211_channel *scan_channel;
 
+	/* current operating channel definition */
+	struct cfg80211_chan_def chandef;
+
 	int free_vdev_map;
 	int monitor_vdev_id;
 	bool monitor_enabled;
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index bff0871fa6bd..8fe451796fde 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -488,8 +488,7 @@ static inline int ath10k_vdev_setup_sync(struct ath10k *ar)
 static int ath10k_vdev_start(struct ath10k_vif *arvif)
 {
 	struct ath10k *ar = arvif->ar;
-	struct ieee80211_conf *conf = &ar->hw->conf;
-	struct ieee80211_channel *channel = conf->chandef.chan;
+	struct cfg80211_chan_def *chandef = &ar->chandef;
 	struct wmi_vdev_start_request_arg arg = {};
 	int ret = 0;
 
@@ -501,16 +500,14 @@ static int ath10k_vdev_start(struct ath10k_vif *arvif)
 	arg.dtim_period = arvif->dtim_period;
 	arg.bcn_intval = arvif->beacon_interval;
 
-	arg.channel.freq = channel->center_freq;
-
-	arg.channel.band_center_freq1 = conf->chandef.center_freq1;
-
-	arg.channel.mode = chan_to_phymode(&conf->chandef);
+	arg.channel.freq = chandef->chan->center_freq;
+	arg.channel.band_center_freq1 = chandef->center_freq1;
+	arg.channel.mode = chan_to_phymode(chandef);
 
 	arg.channel.min_power = 0;
-	arg.channel.max_power = channel->max_power * 2;
-	arg.channel.max_reg_power = channel->max_reg_power * 2;
-	arg.channel.max_antenna_gain = channel->max_antenna_gain * 2;
+	arg.channel.max_power = chandef->chan->max_power * 2;
+	arg.channel.max_reg_power = chandef->chan->max_reg_power * 2;
+	arg.channel.max_antenna_gain = chandef->chan->max_antenna_gain * 2;
 
 	if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
 		arg.ssid = arvif->u.ap.ssid;
@@ -519,7 +516,7 @@ static int ath10k_vdev_start(struct ath10k_vif *arvif)
 
 		/* For now allow DFS for AP mode */
 		arg.channel.chan_radar =
-			!!(channel->flags & IEEE80211_CHAN_RADAR);
+			!!(chandef->chan->flags & IEEE80211_CHAN_RADAR);
 	} else if (arvif->vdev_type == WMI_VDEV_TYPE_IBSS) {
 		arg.ssid = arvif->vif->bss_conf.ssid;
 		arg.ssid_len = arvif->vif->bss_conf.ssid_len;
@@ -571,7 +568,8 @@ static int ath10k_vdev_stop(struct ath10k_vif *arvif)
 
 static int ath10k_monitor_start(struct ath10k *ar, int vdev_id)
 {
-	struct ieee80211_channel *channel = ar->hw->conf.chandef.chan;
+	struct cfg80211_chan_def *chandef = &ar->chandef;
+	struct ieee80211_channel *channel = chandef->chan;
 	struct wmi_vdev_start_request_arg arg = {};
 	int ret = 0;
 
@@ -584,11 +582,11 @@ static int ath10k_monitor_start(struct ath10k *ar, int vdev_id)
 
 	arg.vdev_id = vdev_id;
 	arg.channel.freq = channel->center_freq;
-	arg.channel.band_center_freq1 = ar->hw->conf.chandef.center_freq1;
+	arg.channel.band_center_freq1 = chandef->center_freq1;
 
 	/* TODO setup this dynamically, what in case we
 	   don't have any vifs? */
-	arg.channel.mode = chan_to_phymode(&ar->hw->conf.chandef);
+	arg.channel.mode = chan_to_phymode(chandef);
 	arg.channel.chan_radar =
 			!!(channel->flags & IEEE80211_CHAN_RADAR);
 
@@ -835,6 +833,10 @@ static void ath10k_control_beaconing(struct ath10k_vif *arvif,
 
 	if (!info->enable_beacon) {
 		ath10k_vdev_stop(arvif);
+
+		arvif->is_started = false;
+		arvif->is_up = false;
+
 		return;
 	}
 
@@ -844,12 +846,21 @@ static void ath10k_control_beaconing(struct ath10k_vif *arvif,
 	if (ret)
 		return;
 
-	ret = ath10k_wmi_vdev_up(arvif->ar, arvif->vdev_id, 0, info->bssid);
+	arvif->aid = 0;
+	memcpy(arvif->bssid, info->bssid, ETH_ALEN);
+
+	ret = ath10k_wmi_vdev_up(arvif->ar, arvif->vdev_id, arvif->aid,
+				 arvif->bssid);
 	if (ret) {
 		ath10k_warn("Failed to bring up VDEV: %d\n",
 			    arvif->vdev_id);
+		ath10k_vdev_stop(arvif);
 		return;
 	}
+
+	arvif->is_started = true;
+	arvif->is_up = true;
+
 	ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d up\n", arvif->vdev_id);
 }
 
@@ -868,18 +879,18 @@ static void ath10k_control_ibss(struct ath10k_vif *arvif,
 			ath10k_warn("Failed to delete IBSS self peer:%pM for VDEV:%d ret:%d\n",
 				    self_peer, arvif->vdev_id, ret);
 
-		if (is_zero_ether_addr(arvif->u.ibss.bssid))
+		if (is_zero_ether_addr(arvif->bssid))
 			return;
 
 		ret = ath10k_peer_delete(arvif->ar, arvif->vdev_id,
-					 arvif->u.ibss.bssid);
+					 arvif->bssid);
 		if (ret) {
 			ath10k_warn("Failed to delete IBSS BSSID peer:%pM for VDEV:%d ret:%d\n",
-				    arvif->u.ibss.bssid, arvif->vdev_id, ret);
+				    arvif->bssid, arvif->vdev_id, ret);
 			return;
 		}
 
-		memset(arvif->u.ibss.bssid, 0, ETH_ALEN);
+		memset(arvif->bssid, 0, ETH_ALEN);
 
 		return;
 	}
@@ -1387,11 +1398,17 @@ static void ath10k_bss_assoc(struct ieee80211_hw *hw,
 		   "mac vdev %d up (associated) bssid %pM aid %d\n",
 		   arvif->vdev_id, bss_conf->bssid, bss_conf->aid);
 
-	ret = ath10k_wmi_vdev_up(ar, arvif->vdev_id, bss_conf->aid,
-				 bss_conf->bssid);
-	if (ret)
+	arvif->aid = bss_conf->aid;
+	memcpy(arvif->bssid, bss_conf->bssid, ETH_ALEN);
+
+	ret = ath10k_wmi_vdev_up(ar, arvif->vdev_id, arvif->aid, arvif->bssid);
+	if (ret) {
 		ath10k_warn("VDEV: %d up failed: ret %d\n",
 			    arvif->vdev_id, ret);
+		return;
+	}
+
+	arvif->is_up = true;
 }
 
 /*
@@ -1431,6 +1448,9 @@ static void ath10k_bss_disassoc(struct ieee80211_hw *hw,
 	ret = ath10k_wmi_vdev_down(ar, arvif->vdev_id);
 
 	arvif->def_wep_key_idx = 0;
+
+	arvif->is_started = false;
+	arvif->is_up = false;
 }
 
 static int ath10k_station_assoc(struct ath10k *ar, struct ath10k_vif *arvif,
@@ -2201,6 +2221,98 @@ static int ath10k_config_ps(struct ath10k *ar)
 	return ret;
 }
 
+static const char *chandef_get_width(enum nl80211_chan_width width)
+{
+	switch (width) {
+	case NL80211_CHAN_WIDTH_20_NOHT:
+		return "20 (noht)";
+	case NL80211_CHAN_WIDTH_20:
+		return "20";
+	case NL80211_CHAN_WIDTH_40:
+		return "40";
+	case NL80211_CHAN_WIDTH_80:
+		return "80";
+	case NL80211_CHAN_WIDTH_80P80:
+		return "80+80";
+	case NL80211_CHAN_WIDTH_160:
+		return "160";
+	case NL80211_CHAN_WIDTH_5:
+		return "5";
+	case NL80211_CHAN_WIDTH_10:
+		return "10";
+	}
+	return "?";
+}
+
+static void ath10k_config_chan(struct ath10k *ar)
+{
+	struct ath10k_vif *arvif;
+	bool monitor_was_enabled;
+	int ret;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	ath10k_dbg(ATH10K_DBG_MAC,
+		   "mac config channel to %dMHz (cf1 %dMHz cf2 %dMHz width %s)\n",
+		   ar->chandef.chan->center_freq,
+		   ar->chandef.center_freq1,
+		   ar->chandef.center_freq2,
+		   chandef_get_width(ar->chandef.width));
+
+	/* First stop monitor interface. Some FW versions crash if there's a
+	 * lone monitor interface. */
+	monitor_was_enabled = ar->monitor_enabled;
+
+	if (ar->monitor_enabled)
+		ath10k_monitor_stop(ar);
+
+	list_for_each_entry(arvif, &ar->arvifs, list) {
+		if (!arvif->is_started)
+			continue;
+
+		if (arvif->vdev_type == WMI_VDEV_TYPE_MONITOR)
+			continue;
+
+		ret = ath10k_vdev_stop(arvif);
+		if (ret) {
+			ath10k_warn("could not stop vdev %d (%d)\n",
+				    arvif->vdev_id, ret);
+			continue;
+		}
+	}
+
+	/* all vdevs are now stopped - now attempt to restart them */
+
+	list_for_each_entry(arvif, &ar->arvifs, list) {
+		if (!arvif->is_started)
+			continue;
+
+		if (arvif->vdev_type == WMI_VDEV_TYPE_MONITOR)
+			continue;
+
+		ret = ath10k_vdev_start(arvif);
+		if (ret) {
+			ath10k_warn("could not start vdev %d (%d)\n",
+				    arvif->vdev_id, ret);
+			continue;
+		}
+
+		if (!arvif->is_up)
+			continue;
+
+		ret = ath10k_wmi_vdev_up(arvif->ar, arvif->vdev_id, arvif->aid,
+					 arvif->bssid);
+		if (ret) {
+			ath10k_warn("could not bring vdev up %d (%d)\n",
+				    arvif->vdev_id, ret);
+			continue;
+		}
+	}
+
+	if (monitor_was_enabled)
+		ath10k_monitor_start(ar, ar->monitor_vdev_id);
+}
+
 static int ath10k_config(struct ieee80211_hw *hw, u32 changed)
 {
 	struct ath10k *ar = hw->priv;
@@ -2221,6 +2333,11 @@ static int ath10k_config(struct ieee80211_hw *hw, u32 changed)
 		spin_unlock_bh(&ar->data_lock);
 
 		ath10k_config_radar_detection(ar);
+
+		if (!cfg80211_chandef_identical(&ar->chandef, &conf->chandef)) {
+			ar->chandef = conf->chandef;
+			ath10k_config_chan(ar);
+		}
 	}
 
 	if (changed & IEEE80211_CONF_CHANGE_POWER) {
@@ -2615,15 +2732,20 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
 				 * this is never erased as we it for crypto key
 				 * clearing; this is FW requirement
 				 */
-				memcpy(arvif->u.sta.bssid, info->bssid,
-				       ETH_ALEN);
+				memcpy(arvif->bssid, info->bssid, ETH_ALEN);
 
 				ath10k_dbg(ATH10K_DBG_MAC,
 					   "mac vdev %d start %pM\n",
 					   arvif->vdev_id, info->bssid);
 
-				/* FIXME: check return value */
 				ret = ath10k_vdev_start(arvif);
+				if (ret) {
+					ath10k_warn("failed to start vdev: %d\n",
+						    ret);
+					return;
+				}
+
+				arvif->is_started = true;
 			}
 
 			/*
@@ -2632,7 +2754,7 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
 			 * IBSS in order to remove BSSID peer.
 			 */
 			if (vif->type == NL80211_IFTYPE_ADHOC)
-				memcpy(arvif->u.ibss.bssid, info->bssid,
+				memcpy(arvif->bssid, info->bssid,
 				       ETH_ALEN);
 		}
 	}
-- 
cgit v1.2.2


From c2df44b39b31a730a89b13f7be90860d93d1f9d8 Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Thu, 23 Jan 2014 11:38:26 +0100
Subject: ath10k: implement AP CSA

Most channel switching logic has been implemented
already so this patch is pretty small. The patch
makes use of mac80211's vif->csa_active for AP CSA
handling.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/mac.c | 10 ++++++++++
 drivers/net/wireless/ath/ath10k/wmi.c | 11 +++++++++++
 2 files changed, 21 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 8fe451796fde..4bf5f19602e4 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -3818,6 +3818,14 @@ static int ath10k_set_bitrate_mask(struct ieee80211_hw *hw,
 	return ath10k_set_fixed_rate_param(arvif, fixed_rate, fixed_nss);
 }
 
+static void ath10k_channel_switch_beacon(struct ieee80211_hw *hw,
+					 struct ieee80211_vif *vif,
+					 struct cfg80211_chan_def *chandef)
+{
+	/* there's no need to do anything here. vif->csa_active is enough */
+	return;
+}
+
 static const struct ieee80211_ops ath10k_ops = {
 	.tx				= ath10k_tx,
 	.start				= ath10k_start,
@@ -3841,6 +3849,7 @@ static const struct ieee80211_ops ath10k_ops = {
 	.restart_complete		= ath10k_restart_complete,
 	.get_survey			= ath10k_get_survey,
 	.set_bitrate_mask		= ath10k_set_bitrate_mask,
+	.channel_switch_beacon		= ath10k_channel_switch_beacon,
 #ifdef CONFIG_PM
 	.suspend			= ath10k_suspend,
 	.resume				= ath10k_resume,
@@ -4220,6 +4229,7 @@ int ath10k_mac_register(struct ath10k *ar)
 	ar->hw->max_listen_interval = ATH10K_MAX_HW_LISTEN_INTERVAL;
 
 	ar->hw->wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL;
+	ar->hw->wiphy->flags |= WIPHY_FLAG_HAS_CHANNEL_SWITCH;
 	ar->hw->wiphy->max_remain_on_channel_duration = 5000;
 
 	ar->hw->wiphy->flags |= WIPHY_FLAG_AP_UAPSD;
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index f0969cd8350f..a1ec5d0fb0ef 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -1405,6 +1405,17 @@ static void ath10k_wmi_event_host_swba(struct ath10k *ar, struct sk_buff *skb)
 			continue;
 		}
 
+		/* There are no completions for beacons so wait for next SWBA
+		 * before telling mac80211 to decrement CSA counter
+		 *
+		 * Once CSA counter is completed stop sending beacons until
+		 * actual channel switch is done */
+		if (arvif->vif->csa_active &&
+		    ieee80211_csa_is_complete(arvif->vif)) {
+			ieee80211_csa_finish(arvif->vif);
+			continue;
+		}
+
 		bcn = ieee80211_beacon_get(ar->hw, arvif->vif);
 		if (!bcn) {
 			ath10k_warn("could not get mac80211 beacon\n");
-- 
cgit v1.2.2


From 748afc4735361e21ad655c0dc021ea3aaeeb3efd Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Thu, 23 Jan 2014 12:48:21 +0100
Subject: ath10k: implement and use new beacon method

Until now ath10k used a copy-by-value beacon
submission.

The new method passes a DMA address via WMI
command only. This command contains additional
metadata that fixes AP behaviour with regard
to powersave buffering.

This also fixes strange bug when multicast traffic
would freeze TX indefinitely.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Marek Puzyniak <marek.puzyniak@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/core.h |  7 ++++
 drivers/net/wireless/ath/ath10k/mac.c  | 10 +++++
 drivers/net/wireless/ath/ath10k/wmi.c  | 71 +++++++++++++++++++++++-----------
 drivers/net/wireless/ath/ath10k/wmi.h  | 21 +++++++++-
 4 files changed, 85 insertions(+), 24 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 8b145209d37d..c0b00e1f7562 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -73,6 +73,11 @@ struct ath10k_skb_cb {
 		u8 frag_len;
 		u8 pad_len;
 	} __packed htt;
+
+	struct {
+		bool dtim_zero;
+		bool deliver_cab;
+	} bcn;
 } __packed;
 
 static inline struct ath10k_skb_cb *ATH10K_SKB_CB(struct sk_buff *skb)
@@ -234,6 +239,8 @@ struct ath10k_vif {
 	u32 beacon_interval;
 	u32 dtim_period;
 	struct sk_buff *beacon;
+	/* protected by data_lock */
+	bool beacon_sent;
 
 	struct ath10k *ar;
 	struct ieee80211_vif *vif;
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 4bf5f19602e4..bb1c8397c0d3 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -837,6 +837,16 @@ static void ath10k_control_beaconing(struct ath10k_vif *arvif,
 		arvif->is_started = false;
 		arvif->is_up = false;
 
+		spin_lock_bh(&arvif->ar->data_lock);
+		if (arvif->beacon) {
+			ath10k_skb_unmap(arvif->ar->dev, arvif->beacon);
+			dev_kfree_skb_any(arvif->beacon);
+
+			arvif->beacon = NULL;
+			arvif->beacon_sent = false;
+		}
+		spin_unlock_bh(&arvif->ar->data_lock);
+
 		return;
 	}
 
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index a1ec5d0fb0ef..bd01f0a7dafb 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -561,7 +561,6 @@ err_pull:
 
 static void ath10k_wmi_tx_beacon_nowait(struct ath10k_vif *arvif)
 {
-	struct wmi_bcn_tx_arg arg = {0};
 	int ret;
 
 	lockdep_assert_held(&arvif->ar->data_lock);
@@ -569,18 +568,16 @@ static void ath10k_wmi_tx_beacon_nowait(struct ath10k_vif *arvif)
 	if (arvif->beacon == NULL)
 		return;
 
-	arg.vdev_id = arvif->vdev_id;
-	arg.tx_rate = 0;
-	arg.tx_power = 0;
-	arg.bcn = arvif->beacon->data;
-	arg.bcn_len = arvif->beacon->len;
+	if (arvif->beacon_sent)
+		return;
 
-	ret = ath10k_wmi_beacon_send_nowait(arvif->ar, &arg);
+	ret = ath10k_wmi_beacon_send_ref_nowait(arvif);
 	if (ret)
 		return;
 
-	dev_kfree_skb_any(arvif->beacon);
-	arvif->beacon = NULL;
+	/* We need to retain the arvif->beacon reference for DMA unmapping and
+	 * freeing the skbuff later. */
+	arvif->beacon_sent = true;
 }
 
 static void ath10k_wmi_tx_beacons_iter(void *data, u8 *mac,
@@ -1237,6 +1234,13 @@ static void ath10k_wmi_update_tim(struct ath10k *ar,
 	tim->bitmap_ctrl = !!__le32_to_cpu(bcn_info->tim_info.tim_mcast);
 	memcpy(tim->virtual_map, arvif->u.ap.tim_bitmap, pvm_len);
 
+	if (tim->dtim_count == 0) {
+		ATH10K_SKB_CB(bcn)->bcn.dtim_zero = true;
+
+		if (__le32_to_cpu(bcn_info->tim_info.tim_mcast) == 1)
+			ATH10K_SKB_CB(bcn)->bcn.deliver_cab = true;
+	}
+
 	ath10k_dbg(ATH10K_DBG_MGMT, "dtim %d/%d mcast %d pvmlen %d\n",
 		   tim->dtim_count, tim->dtim_period,
 		   tim->bitmap_ctrl, pvm_len);
@@ -1427,13 +1431,20 @@ static void ath10k_wmi_event_host_swba(struct ath10k *ar, struct sk_buff *skb)
 		ath10k_wmi_update_noa(ar, arvif, bcn, bcn_info);
 
 		spin_lock_bh(&ar->data_lock);
+
 		if (arvif->beacon) {
-			ath10k_warn("SWBA overrun on vdev %d\n",
-				    arvif->vdev_id);
+			if (!arvif->beacon_sent)
+				ath10k_warn("SWBA overrun on vdev %d\n",
+					    arvif->vdev_id);
+
+			ath10k_skb_unmap(ar->dev, arvif->beacon);
 			dev_kfree_skb_any(arvif->beacon);
 		}
 
+		ath10k_skb_map(ar->dev, bcn);
+
 		arvif->beacon = bcn;
+		arvif->beacon_sent = false;
 
 		ath10k_wmi_tx_beacon_nowait(arvif);
 		spin_unlock_bh(&ar->data_lock);
@@ -3442,25 +3453,41 @@ int ath10k_wmi_peer_assoc(struct ath10k *ar,
 	return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->peer_assoc_cmdid);
 }
 
-int ath10k_wmi_beacon_send_nowait(struct ath10k *ar,
-				  const struct wmi_bcn_tx_arg *arg)
+/* This function assumes the beacon is already DMA mapped */
+int ath10k_wmi_beacon_send_ref_nowait(struct ath10k_vif *arvif)
 {
-	struct wmi_bcn_tx_cmd *cmd;
+	struct wmi_bcn_tx_ref_cmd *cmd;
 	struct sk_buff *skb;
+	struct sk_buff *beacon = arvif->beacon;
+	struct ath10k *ar = arvif->ar;
+	struct ieee80211_hdr *hdr;
 	int ret;
+	u16 fc;
 
-	skb = ath10k_wmi_alloc_skb(sizeof(*cmd) + arg->bcn_len);
+	skb = ath10k_wmi_alloc_skb(sizeof(*cmd));
 	if (!skb)
 		return -ENOMEM;
 
-	cmd = (struct wmi_bcn_tx_cmd *)skb->data;
-	cmd->hdr.vdev_id  = __cpu_to_le32(arg->vdev_id);
-	cmd->hdr.tx_rate  = __cpu_to_le32(arg->tx_rate);
-	cmd->hdr.tx_power = __cpu_to_le32(arg->tx_power);
-	cmd->hdr.bcn_len  = __cpu_to_le32(arg->bcn_len);
-	memcpy(cmd->bcn, arg->bcn, arg->bcn_len);
+	hdr = (struct ieee80211_hdr *)beacon->data;
+	fc = le16_to_cpu(hdr->frame_control);
+
+	cmd = (struct wmi_bcn_tx_ref_cmd *)skb->data;
+	cmd->vdev_id = __cpu_to_le32(arvif->vdev_id);
+	cmd->data_len = __cpu_to_le32(beacon->len);
+	cmd->data_ptr = __cpu_to_le32(ATH10K_SKB_CB(beacon)->paddr);
+	cmd->msdu_id = 0;
+	cmd->frame_control = __cpu_to_le32(fc);
+	cmd->flags = 0;
+
+	if (ATH10K_SKB_CB(beacon)->bcn.dtim_zero)
+		cmd->flags |= __cpu_to_le32(WMI_BCN_TX_REF_FLAG_DTIM_ZERO);
+
+	if (ATH10K_SKB_CB(beacon)->bcn.deliver_cab)
+		cmd->flags |= __cpu_to_le32(WMI_BCN_TX_REF_FLAG_DELIVER_CAB);
+
+	ret = ath10k_wmi_cmd_send_nowait(ar, skb,
+					 ar->wmi.cmd->pdev_send_bcn_cmdid);
 
-	ret = ath10k_wmi_cmd_send_nowait(ar, skb, ar->wmi.cmd->bcn_tx_cmdid);
 	if (ret)
 		dev_kfree_skb(skb);
 
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 9dc90c5dd0e4..9d9a81bfbb36 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -3403,6 +3403,24 @@ struct wmi_bcn_tx_arg {
 	const void *bcn;
 };
 
+enum wmi_bcn_tx_ref_flags {
+	WMI_BCN_TX_REF_FLAG_DTIM_ZERO = 0x1,
+	WMI_BCN_TX_REF_FLAG_DELIVER_CAB = 0x2,
+};
+
+struct wmi_bcn_tx_ref_cmd {
+	__le32 vdev_id;
+	__le32 data_len;
+	/* physical address of the frame - dma pointer */
+	__le32 data_ptr;
+	/* id for host to track */
+	__le32 msdu_id;
+	/* frame ctrl to setup PPDU desc */
+	__le32 frame_control;
+	/* to control CABQ traffic: WMI_BCN_TX_REF_FLAG_ */
+	__le32 flags;
+} __packed;
+
 /* Beacon filter */
 #define WMI_BCN_FILTER_ALL   0 /* Filter all beacons */
 #define WMI_BCN_FILTER_NONE  1 /* Pass all beacons */
@@ -4223,8 +4241,7 @@ int ath10k_wmi_set_ap_ps_param(struct ath10k *ar, u32 vdev_id, const u8 *mac,
 			       enum wmi_ap_ps_peer_param param_id, u32 value);
 int ath10k_wmi_scan_chan_list(struct ath10k *ar,
 			      const struct wmi_scan_chan_list_arg *arg);
-int ath10k_wmi_beacon_send_nowait(struct ath10k *ar,
-				  const struct wmi_bcn_tx_arg *arg);
+int ath10k_wmi_beacon_send_ref_nowait(struct ath10k_vif *arvif);
 int ath10k_wmi_pdev_set_wmm_params(struct ath10k *ar,
 			const struct wmi_pdev_set_wmm_params_arg *arg);
 int ath10k_wmi_request_stats(struct ath10k *ar, enum wmi_stats_id stats_id);
-- 
cgit v1.2.2


From c60bdd8334804720e9d236c543612c998baaee0d Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Wed, 29 Jan 2014 07:26:31 +0100
Subject: ath10k: properly return err from start()

If recovery failed ath10k returned 0 (success) and
mac80211 continued to call other driver callbacks.
This caused null dereference.

This is how the failure looked like:

ath10k: ctl_resp never came in (-110)
ath10k: failed to connect to HTC: -110
ath10k: could not init core (-110)
BUG: unable to handle kernel NULL pointer dereference at           (null)
IP: [<ffffffffa0b355c1>] ath10k_ce_send+0x1d/0x15d [ath10k_pci]
PGD 0
Oops: 0000 [#1] PREEMPT SMP
Modules linked in: ath10k_pci ath10k_core ath5k ath9k ath9k_common ath9k_hw ath mac80211 cfg80211 nf_nat_ipv4 ]
CPU: 1 PID: 36 Comm: kworker/1:1 Tainted: G        WC   3.13.0-rc8-wl-ath+ #8
Hardware name: To be filled by O.E.M. To be filled by O.E.M./HURONRIVER, BIOS 4.6.5 05/02/2012
Workqueue: events ieee80211_restart_work [mac80211]
task: ffff880215b521c0 ti: ffff880215e18000 task.ti: ffff880215e18000
RIP: 0010:[<ffffffffa0b355c1>]  [<ffffffffa0b355c1>] ath10k_ce_send+0x1d/0x15d [ath10k_pci]
RSP: 0018:ffff880215e19af8  EFLAGS: 00010292
RAX: ffff880215e19b10 RBX: 0000000000000000 RCX: 0000000000000018
RDX: 00000000d9ccf800 RSI: ffff8800c965ad00 RDI: 0000000000000000
RBP: ffff880215e19b58 R08: 0000000000000002 R09: 0000000000000000
R10: ffffffff812e1a23 R11: 0000000000000292 R12: 0000000000000018
R13: 0000000000000000 R14: 0000000000000002 R15: ffff88021562d700
FS:  0000000000000000(0000) GS:ffff88021fa80000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000001a0d000 CR4: 00000000000407e0
Stack:
 d9ccf8000d47df40 ffffffffa0b367a0 ffff880215e19b10 0000000000000010
 ffff880215e19b68 ffff880215e19b28 0000000000000018 ffff8800c965ad00
 0000000000000018 0000000000000000 0000000000000002 ffff88021562d700
Call Trace:
 [<ffffffffa0b3251d>] ath10k_pci_hif_send_head+0xa7/0xcb [ath10k_pci]
 [<ffffffffa0b16cbe>] ath10k_htc_send+0x23d/0x2d0 [ath10k_core]
 [<ffffffffa0b1a169>] ath10k_wmi_cmd_send_nowait+0x5d/0x85 [ath10k_core]
 [<ffffffffa0b1aaef>] ath10k_wmi_cmd_send+0x62/0x115 [ath10k_core]
 [<ffffffff814e8abd>] ? __netdev_alloc_skb+0x4b/0x9b
 [<ffffffffa0b1c438>] ath10k_wmi_vdev_set_param+0x91/0xa3 [ath10k_core]
 [<ffffffffa0b0e0d5>] ath10k_mac_set_rts+0x3e/0x40 [ath10k_core]
 [<ffffffffa0b0e1d0>] ath10k_set_frag_threshold+0x5e/0x9c [ath10k_core]
 [<ffffffffa09d60eb>] ieee80211_reconfig+0x12a/0x7b3 [mac80211]
 [<ffffffff815a8069>] ? mutex_unlock+0x9/0xb
 [<ffffffffa09b3a40>] ieee80211_restart_work+0x5e/0x68 [mac80211]
 [<ffffffff810c01d0>] process_one_work+0x1d7/0x2fc
 [<ffffffff810c0166>] ? process_one_work+0x16d/0x2fc
 [<ffffffff810c06c8>] worker_thread+0x12e/0x1fb
 [<ffffffff810c059a>] ? rescuer_thread+0x27b/0x27b
 [<ffffffff810c5aee>] kthread+0xb5/0xbd
 [<ffffffff815a9220>] ? _raw_spin_unlock_irq+0x28/0x42
 [<ffffffff810c5a39>] ? __kthread_parkme+0x5c/0x5c
 [<ffffffff815ae04c>] ret_from_fork+0x7c/0xb0
 [<ffffffff810c5a39>] ? __kthread_parkme+0x5c/0x5c
Code: df ff d0 48 83 c4 18 5b 41 5c 41 5d 5d c3 55 48 89 e5 41 57 41 56 45 89 c6 41 55 41 54 41 89 cc 53 48 89
RIP  [<ffffffffa0b355c1>] ath10k_ce_send+0x1d/0x15d [ath10k_pci]
 RSP <ffff880215e19af8>
CR2: 0000000000000000

Reported-By: Ben Greear <greearb@candelatech.com>
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/mac.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index bb1c8397c0d3..ce91d5c9d60a 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -2187,10 +2187,11 @@ static int ath10k_start(struct ieee80211_hw *hw)
 			    ret);
 
 	ath10k_regd_update(ar);
+	ret = 0;
 
 exit:
 	mutex_unlock(&ar->conf_mutex);
-	return 0;
+	return ret;
 }
 
 static void ath10k_stop(struct ieee80211_hw *hw)
-- 
cgit v1.2.2


From ab6258edb4e15af016bb9c64fb521211a3f22b36 Mon Sep 17 00:00:00 2001
From: Marek Puzyniak <marek.puzyniak@tieto.com>
Date: Wed, 29 Jan 2014 15:03:31 +0200
Subject: ath10k: configure access category for arp

ARP frames exchange does not work properly for UAPSD enabled AP.
ARP requests which arrives with access category 0 are processed
by network stack and send back with access category 0. FW changes
access category to 6. This is causing problems when UAPSD associated
STA is sleeping after has sent ARP request. Configure ARP access
category in FW to best effort (0) solves this problem. ARP frames
will be send with access category 0.

Simplify arp ac override functionality by removing redundant entry in
pdev param maping table. There should be only one entry in pdev param
map but enum has different name for different FW.

kvalo: change the warning message

Signed-off-by: Marek Puzyniak <marek.puzyniak@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/mac.c | 17 +++++++++++++++++
 drivers/net/wireless/ath/ath10k/wmi.c |  4 +---
 drivers/net/wireless/ath/ath10k/wmi.h |  1 -
 3 files changed, 18 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index ce91d5c9d60a..144b4d605267 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -2186,6 +2186,23 @@ static int ath10k_start(struct ieee80211_hw *hw)
 		ath10k_warn("could not init WMI_PDEV_PARAM_DYNAMIC_BW (%d)\n",
 			    ret);
 
+	/*
+	 * By default FW set ARP frames ac to voice (6). In that case ARP
+	 * exchange is not working properly for UAPSD enabled AP. ARP requests
+	 * which arrives with access category 0 are processed by network stack
+	 * and send back with access category 0, but FW changes access category
+	 * to 6. Set ARP frames access category to best effort (0) solves
+	 * this problem.
+	 */
+
+	ret = ath10k_wmi_pdev_set_param(ar,
+					ar->wmi.pdev_param->arp_ac_override, 0);
+	if (ret) {
+		ath10k_warn("could not set arp ac override parameter: %d\n",
+			    ret);
+		goto exit;
+	}
+
 	ath10k_regd_update(ar);
 	ret = 0;
 
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index bd01f0a7dafb..7298c0677b0b 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -420,7 +420,6 @@ static struct wmi_pdev_param_map wmi_pdev_param_map = {
 	.bcnflt_stats_update_period = WMI_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
 	.pmf_qos = WMI_PDEV_PARAM_PMF_QOS,
 	.arp_ac_override = WMI_PDEV_PARAM_ARP_AC_OVERRIDE,
-	.arpdhcp_ac_override = WMI_PDEV_PARAM_UNSUPPORTED,
 	.dcs = WMI_PDEV_PARAM_DCS,
 	.ani_enable = WMI_PDEV_PARAM_ANI_ENABLE,
 	.ani_poll_period = WMI_PDEV_PARAM_ANI_POLL_PERIOD,
@@ -472,8 +471,7 @@ static struct wmi_pdev_param_map wmi_10x_pdev_param_map = {
 	.bcnflt_stats_update_period =
 				WMI_10X_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
 	.pmf_qos = WMI_10X_PDEV_PARAM_PMF_QOS,
-	.arp_ac_override = WMI_PDEV_PARAM_UNSUPPORTED,
-	.arpdhcp_ac_override = WMI_10X_PDEV_PARAM_ARPDHCP_AC_OVERRIDE,
+	.arp_ac_override = WMI_10X_PDEV_PARAM_ARPDHCP_AC_OVERRIDE,
 	.dcs = WMI_10X_PDEV_PARAM_DCS,
 	.ani_enable = WMI_10X_PDEV_PARAM_ANI_ENABLE,
 	.ani_poll_period = WMI_10X_PDEV_PARAM_ANI_POLL_PERIOD,
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 9d9a81bfbb36..083079f3fdd4 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -2277,7 +2277,6 @@ struct wmi_pdev_param_map {
 	u32 bcnflt_stats_update_period;
 	u32 pmf_qos;
 	u32 arp_ac_override;
-	u32 arpdhcp_ac_override;
 	u32 dcs;
 	u32 ani_enable;
 	u32 ani_poll_period;
-- 
cgit v1.2.2


From 3e56eadfb6a1f28d753afa9fe27296258ae240e5 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Fri, 15 Feb 2013 22:23:18 +0100
Subject: iwlwifi: mvm: implement AP/GO uAPSD support

Newer firmware will support uAPSD clients in AP/GO mode, so complete
the driver support for it. The way it works is described in comments
in the code, but basically the driver just has to pass down all the
mac80211 requests and do accounting on agg/non-agg queues properly.

For older firmware, this doesn't change anything as it ignores the
fields used by the new firmware, and we only advertise uAPSD support
when the firmware does.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-fw.h         |   2 +
 drivers/net/wireless/iwlwifi/mvm/fw-api-sta.h |  31 +++--
 drivers/net/wireless/iwlwifi/mvm/fw-api.h     |   1 +
 drivers/net/wireless/iwlwifi/mvm/mac80211.c   |  59 +++++++--
 drivers/net/wireless/iwlwifi/mvm/ops.c        |   3 +
 drivers/net/wireless/iwlwifi/mvm/sta.c        | 171 +++++++++++++++++++-------
 drivers/net/wireless/iwlwifi/mvm/sta.h        |  57 ++++++---
 drivers/net/wireless/iwlwifi/mvm/tx.c         |  23 ++++
 8 files changed, 270 insertions(+), 77 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-fw.h b/drivers/net/wireless/iwlwifi/iwl-fw.h
index 5f1493c44097..726327782401 100644
--- a/drivers/net/wireless/iwlwifi/iwl-fw.h
+++ b/drivers/net/wireless/iwlwifi/iwl-fw.h
@@ -95,6 +95,7 @@
  * @IWL_UCODE_TLV_FLAGS_P2P_PS: P2P client power save is supported (only on a
  *	single bound interface).
  * @IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD: P2P client supports uAPSD power save
+ * @IWL_UCODE_TLV_FLAGS_GO_UAPSD: AP/GO interfaces support uAPSD clients
  */
 enum iwl_ucode_tlv_flag {
 	IWL_UCODE_TLV_FLAGS_PAN			= BIT(0),
@@ -119,6 +120,7 @@ enum iwl_ucode_tlv_flag {
 	IWL_UCODE_TLV_FLAGS_P2P_PS		= BIT(21),
 	IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT	= BIT(24),
 	IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD	= BIT(26),
+	IWL_UCODE_TLV_FLAGS_GO_UAPSD		= BIT(30),
 };
 
 /* The default calibrate table size if not specified by firmware file */
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-sta.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-sta.h
index 1b60fdff6a56..d63647867262 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api-sta.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-sta.h
@@ -199,11 +199,14 @@ enum iwl_sta_modify_flag {
  * @STA_SLEEP_STATE_AWAKE:
  * @STA_SLEEP_STATE_PS_POLL:
  * @STA_SLEEP_STATE_UAPSD:
+ * @STA_SLEEP_STATE_MOREDATA: set more-data bit on
+ *	(last) released frame
  */
 enum iwl_sta_sleep_flag {
-	STA_SLEEP_STATE_AWAKE	= 0,
-	STA_SLEEP_STATE_PS_POLL	= BIT(0),
-	STA_SLEEP_STATE_UAPSD	= BIT(1),
+	STA_SLEEP_STATE_AWAKE		= 0,
+	STA_SLEEP_STATE_PS_POLL		= BIT(0),
+	STA_SLEEP_STATE_UAPSD		= BIT(1),
+	STA_SLEEP_STATE_MOREDATA	= BIT(2),
 };
 
 /* STA ID and color bits definitions */
@@ -318,13 +321,15 @@ struct iwl_mvm_add_sta_cmd_v5 {
 } __packed; /* ADD_STA_CMD_API_S_VER_5 */
 
 /**
- * struct iwl_mvm_add_sta_cmd_v6 - Add / modify a station
- * VER_6 of this command is quite similar to VER_5 except
+ * struct iwl_mvm_add_sta_cmd_v7 - Add / modify a station
+ * VER_7 of this command is quite similar to VER_5 except
  * exclusion of all fields related to the security key installation.
+ * It only differs from VER_6 by the "awake_acs" field that is
+ * reserved and ignored in VER_6.
  */
-struct iwl_mvm_add_sta_cmd_v6 {
+struct iwl_mvm_add_sta_cmd_v7 {
 	u8 add_modify;
-	u8 reserved1;
+	u8 awake_acs;
 	__le16 tid_disable_tx;
 	__le32 mac_id_n_color;
 	u8 addr[ETH_ALEN];	/* _STA_ID_MODIFY_INFO_API_S_VER_1 */
@@ -342,7 +347,7 @@ struct iwl_mvm_add_sta_cmd_v6 {
 	__le16 assoc_id;
 	__le16 beamform_flags;
 	__le32 tfd_queue_msk;
-} __packed; /* ADD_STA_CMD_API_S_VER_6 */
+} __packed; /* ADD_STA_CMD_API_S_VER_7 */
 
 /**
  * struct iwl_mvm_add_sta_key_cmd - add/modify sta key
@@ -432,5 +437,15 @@ struct iwl_mvm_wep_key_cmd {
 	struct iwl_mvm_wep_key wep_key[0];
 } __packed; /* SEC_CURR_WEP_KEY_CMD_API_S_VER_2 */
 
+/**
+ * struct iwl_mvm_eosp_notification - EOSP notification from firmware
+ * @remain_frame_count: # of frames remaining, non-zero if SP was cut
+ *	short by GO absence
+ * @sta_id: station ID
+ */
+struct iwl_mvm_eosp_notification {
+	__le32 remain_frame_count;
+	__le32 sta_id;
+} __packed; /* UAPSD_EOSP_NTFY_API_S_VER_1 */
 
 #endif /* __fw_api_sta_h__ */
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/iwlwifi/mvm/fw-api.h
index 989d7dbdca6c..a043a1f2f06f 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api.h
@@ -163,6 +163,7 @@ enum {
 	TX_ANT_CONFIGURATION_CMD = 0x98,
 	BT_CONFIG = 0x9b,
 	STATISTICS_NOTIFICATION = 0x9d,
+	EOSP_NOTIFICATION = 0x9e,
 	REDUCE_TX_POWER_CMD = 0x9f,
 
 	/* RF-KILL commands and notifications */
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index c49b5073c251..5b9cfe1f35bd 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -203,6 +203,9 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm)
 	hw->wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG |
 				       REGULATORY_DISABLE_BEACON_HINTS;
 
+	if (mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_GO_UAPSD)
+		hw->wiphy->flags |= WIPHY_FLAG_AP_UAPSD;
+
 	hw->wiphy->iface_combinations = iwl_mvm_iface_combinations;
 	hw->wiphy->n_iface_combinations =
 		ARRAY_SIZE(iwl_mvm_iface_combinations);
@@ -305,6 +308,9 @@ static void iwl_mvm_mac_tx(struct ieee80211_hw *hw,
 			   struct sk_buff *skb)
 {
 	struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw);
+	struct ieee80211_sta *sta = control->sta;
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+	struct ieee80211_hdr *hdr = (void *)skb->data;
 
 	if (iwl_mvm_is_radio_killed(mvm)) {
 		IWL_DEBUG_DROP(mvm, "Dropping - RF/CT KILL\n");
@@ -315,8 +321,16 @@ static void iwl_mvm_mac_tx(struct ieee80211_hw *hw,
 	    !test_bit(IWL_MVM_STATUS_ROC_RUNNING, &mvm->status))
 		goto drop;
 
-	if (control->sta) {
-		if (iwl_mvm_tx_skb(mvm, skb, control->sta))
+	/* treat non-bufferable MMPDUs as broadcast if sta is sleeping */
+	if (unlikely(info->flags & IEEE80211_TX_CTL_NO_PS_BUFFER &&
+		     ieee80211_is_mgmt(hdr->frame_control) &&
+		     !ieee80211_is_deauth(hdr->frame_control) &&
+		     !ieee80211_is_disassoc(hdr->frame_control) &&
+		     !ieee80211_is_action(hdr->frame_control)))
+		sta = NULL;
+
+	if (sta) {
+		if (iwl_mvm_tx_skb(mvm, skb, sta))
 			goto drop;
 		return;
 	}
@@ -1168,20 +1182,32 @@ static void iwl_mvm_mac_cancel_hw_scan(struct ieee80211_hw *hw,
 
 static void
 iwl_mvm_mac_allow_buffered_frames(struct ieee80211_hw *hw,
-				  struct ieee80211_sta *sta, u16 tid,
+				  struct ieee80211_sta *sta, u16 tids,
 				  int num_frames,
 				  enum ieee80211_frame_release_type reason,
 				  bool more_data)
 {
 	struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw);
 
-	/* TODO: how do we tell the fw to send frames for a specific TID */
+	/* Called when we need to transmit (a) frame(s) from mac80211 */
 
-	/*
-	 * The fw will send EOSP notification when the last frame will be
-	 * transmitted.
-	 */
-	iwl_mvm_sta_modify_sleep_tx_count(mvm, sta, reason, num_frames);
+	iwl_mvm_sta_modify_sleep_tx_count(mvm, sta, reason, num_frames,
+					  tids, more_data, false);
+}
+
+static void
+iwl_mvm_mac_release_buffered_frames(struct ieee80211_hw *hw,
+				    struct ieee80211_sta *sta, u16 tids,
+				    int num_frames,
+				    enum ieee80211_frame_release_type reason,
+				    bool more_data)
+{
+	struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw);
+
+	/* Called when we need to transmit (a) frame(s) from agg queue */
+
+	iwl_mvm_sta_modify_sleep_tx_count(mvm, sta, reason, num_frames,
+					  tids, more_data, true);
 }
 
 static void iwl_mvm_mac_sta_notify(struct ieee80211_hw *hw,
@@ -1191,11 +1217,25 @@ static void iwl_mvm_mac_sta_notify(struct ieee80211_hw *hw,
 {
 	struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw);
 	struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta);
+	int tid;
 
 	switch (cmd) {
 	case STA_NOTIFY_SLEEP:
 		if (atomic_read(&mvm->pending_frames[mvmsta->sta_id]) > 0)
 			ieee80211_sta_block_awake(hw, sta, true);
+		spin_lock_bh(&mvmsta->lock);
+		for (tid = 0; tid < IWL_MAX_TID_COUNT; tid++) {
+			struct iwl_mvm_tid_data *tid_data;
+
+			tid_data = &mvmsta->tid_data[tid];
+			if (tid_data->state != IWL_AGG_ON &&
+			    tid_data->state != IWL_EMPTYING_HW_QUEUE_DELBA)
+				continue;
+			if (iwl_mvm_tid_queued(tid_data) == 0)
+				continue;
+			ieee80211_sta_set_buffered(sta, tid, true);
+		}
+		spin_unlock_bh(&mvmsta->lock);
 		/*
 		 * The fw updates the STA to be asleep. Tx packets on the Tx
 		 * queues to this station will not be transmitted. The fw will
@@ -1914,6 +1954,7 @@ struct ieee80211_ops iwl_mvm_hw_ops = {
 	.sta_state = iwl_mvm_mac_sta_state,
 	.sta_notify = iwl_mvm_mac_sta_notify,
 	.allow_buffered_frames = iwl_mvm_mac_allow_buffered_frames,
+	.release_buffered_frames = iwl_mvm_mac_release_buffered_frames,
 	.set_rts_threshold = iwl_mvm_mac_set_rts_threshold,
 	.sta_rc_update = iwl_mvm_sta_rc_update,
 	.conf_tx = iwl_mvm_mac_conf_tx,
diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c
index a3d43de342d7..a65eeb335cfb 100644
--- a/drivers/net/wireless/iwlwifi/mvm/ops.c
+++ b/drivers/net/wireless/iwlwifi/mvm/ops.c
@@ -222,6 +222,8 @@ static const struct iwl_rx_handlers iwl_mvm_rx_handlers[] = {
 
 	RX_HANDLER(TIME_EVENT_NOTIFICATION, iwl_mvm_rx_time_event_notif, false),
 
+	RX_HANDLER(EOSP_NOTIFICATION, iwl_mvm_rx_eosp_notif, false),
+
 	RX_HANDLER(SCAN_REQUEST_CMD, iwl_mvm_rx_scan_response, false),
 	RX_HANDLER(SCAN_COMPLETE_NOTIFICATION, iwl_mvm_rx_scan_complete, false),
 	RX_HANDLER(SCAN_OFFLOAD_COMPLETE,
@@ -284,6 +286,7 @@ static const char *iwl_mvm_cmd_strings[REPLY_MAX] = {
 	CMD(BEACON_NOTIFICATION),
 	CMD(BEACON_TEMPLATE_CMD),
 	CMD(STATISTICS_NOTIFICATION),
+	CMD(EOSP_NOTIFICATION),
 	CMD(REDUCE_TX_POWER_CMD),
 	CMD(TX_ANT_CONFIGURATION_CMD),
 	CMD(D3_CONFIG_CMD),
diff --git a/drivers/net/wireless/iwlwifi/mvm/sta.c b/drivers/net/wireless/iwlwifi/mvm/sta.c
index ec1812133235..af94f75c3999 100644
--- a/drivers/net/wireless/iwlwifi/mvm/sta.c
+++ b/drivers/net/wireless/iwlwifi/mvm/sta.c
@@ -66,27 +66,27 @@
 #include "sta.h"
 #include "rs.h"
 
-static void iwl_mvm_add_sta_cmd_v6_to_v5(struct iwl_mvm_add_sta_cmd_v6 *cmd_v6,
+static void iwl_mvm_add_sta_cmd_v7_to_v5(struct iwl_mvm_add_sta_cmd_v7 *cmd_v7,
 					 struct iwl_mvm_add_sta_cmd_v5 *cmd_v5)
 {
 	memset(cmd_v5, 0, sizeof(*cmd_v5));
 
-	cmd_v5->add_modify = cmd_v6->add_modify;
-	cmd_v5->tid_disable_tx = cmd_v6->tid_disable_tx;
-	cmd_v5->mac_id_n_color = cmd_v6->mac_id_n_color;
-	memcpy(cmd_v5->addr, cmd_v6->addr, ETH_ALEN);
-	cmd_v5->sta_id = cmd_v6->sta_id;
-	cmd_v5->modify_mask = cmd_v6->modify_mask;
-	cmd_v5->station_flags = cmd_v6->station_flags;
-	cmd_v5->station_flags_msk = cmd_v6->station_flags_msk;
-	cmd_v5->add_immediate_ba_tid = cmd_v6->add_immediate_ba_tid;
-	cmd_v5->remove_immediate_ba_tid = cmd_v6->remove_immediate_ba_tid;
-	cmd_v5->add_immediate_ba_ssn = cmd_v6->add_immediate_ba_ssn;
-	cmd_v5->sleep_tx_count = cmd_v6->sleep_tx_count;
-	cmd_v5->sleep_state_flags = cmd_v6->sleep_state_flags;
-	cmd_v5->assoc_id = cmd_v6->assoc_id;
-	cmd_v5->beamform_flags = cmd_v6->beamform_flags;
-	cmd_v5->tfd_queue_msk = cmd_v6->tfd_queue_msk;
+	cmd_v5->add_modify = cmd_v7->add_modify;
+	cmd_v5->tid_disable_tx = cmd_v7->tid_disable_tx;
+	cmd_v5->mac_id_n_color = cmd_v7->mac_id_n_color;
+	memcpy(cmd_v5->addr, cmd_v7->addr, ETH_ALEN);
+	cmd_v5->sta_id = cmd_v7->sta_id;
+	cmd_v5->modify_mask = cmd_v7->modify_mask;
+	cmd_v5->station_flags = cmd_v7->station_flags;
+	cmd_v5->station_flags_msk = cmd_v7->station_flags_msk;
+	cmd_v5->add_immediate_ba_tid = cmd_v7->add_immediate_ba_tid;
+	cmd_v5->remove_immediate_ba_tid = cmd_v7->remove_immediate_ba_tid;
+	cmd_v5->add_immediate_ba_ssn = cmd_v7->add_immediate_ba_ssn;
+	cmd_v5->sleep_tx_count = cmd_v7->sleep_tx_count;
+	cmd_v5->sleep_state_flags = cmd_v7->sleep_state_flags;
+	cmd_v5->assoc_id = cmd_v7->assoc_id;
+	cmd_v5->beamform_flags = cmd_v7->beamform_flags;
+	cmd_v5->tfd_queue_msk = cmd_v7->tfd_queue_msk;
 }
 
 static void
@@ -110,7 +110,7 @@ iwl_mvm_add_sta_key_to_add_sta_cmd_v5(struct iwl_mvm_add_sta_key_cmd *key_cmd,
 }
 
 static int iwl_mvm_send_add_sta_cmd_status(struct iwl_mvm *mvm,
-					   struct iwl_mvm_add_sta_cmd_v6 *cmd,
+					   struct iwl_mvm_add_sta_cmd_v7 *cmd,
 					   int *status)
 {
 	struct iwl_mvm_add_sta_cmd_v5 cmd_v5;
@@ -119,14 +119,14 @@ static int iwl_mvm_send_add_sta_cmd_status(struct iwl_mvm *mvm,
 		return iwl_mvm_send_cmd_pdu_status(mvm, ADD_STA, sizeof(*cmd),
 						   cmd, status);
 
-	iwl_mvm_add_sta_cmd_v6_to_v5(cmd, &cmd_v5);
+	iwl_mvm_add_sta_cmd_v7_to_v5(cmd, &cmd_v5);
 
 	return iwl_mvm_send_cmd_pdu_status(mvm, ADD_STA, sizeof(cmd_v5),
 					   &cmd_v5, status);
 }
 
 static int iwl_mvm_send_add_sta_cmd(struct iwl_mvm *mvm, u32 flags,
-				    struct iwl_mvm_add_sta_cmd_v6 *cmd)
+				    struct iwl_mvm_add_sta_cmd_v7 *cmd)
 {
 	struct iwl_mvm_add_sta_cmd_v5 cmd_v5;
 
@@ -134,7 +134,7 @@ static int iwl_mvm_send_add_sta_cmd(struct iwl_mvm *mvm, u32 flags,
 		return iwl_mvm_send_cmd_pdu(mvm, ADD_STA, flags,
 					    sizeof(*cmd), cmd);
 
-	iwl_mvm_add_sta_cmd_v6_to_v5(cmd, &cmd_v5);
+	iwl_mvm_add_sta_cmd_v7_to_v5(cmd, &cmd_v5);
 
 	return iwl_mvm_send_cmd_pdu(mvm, ADD_STA, flags, sizeof(cmd_v5),
 				    &cmd_v5);
@@ -196,7 +196,7 @@ int iwl_mvm_sta_send_to_fw(struct iwl_mvm *mvm, struct ieee80211_sta *sta,
 			   bool update)
 {
 	struct iwl_mvm_sta *mvm_sta = (void *)sta->drv_priv;
-	struct iwl_mvm_add_sta_cmd_v6 add_sta_cmd;
+	struct iwl_mvm_add_sta_cmd_v7 add_sta_cmd;
 	int ret;
 	u32 status;
 	u32 agg_size = 0, mpdu_dens = 0;
@@ -368,7 +368,7 @@ int iwl_mvm_update_sta(struct iwl_mvm *mvm,
 int iwl_mvm_drain_sta(struct iwl_mvm *mvm, struct iwl_mvm_sta *mvmsta,
 		      bool drain)
 {
-	struct iwl_mvm_add_sta_cmd_v6 cmd = {};
+	struct iwl_mvm_add_sta_cmd_v7 cmd = {};
 	int ret;
 	u32 status;
 
@@ -587,13 +587,13 @@ static int iwl_mvm_add_int_sta_common(struct iwl_mvm *mvm,
 				      const u8 *addr,
 				      u16 mac_id, u16 color)
 {
-	struct iwl_mvm_add_sta_cmd_v6 cmd;
+	struct iwl_mvm_add_sta_cmd_v7 cmd;
 	int ret;
 	u32 status;
 
 	lockdep_assert_held(&mvm->mutex);
 
-	memset(&cmd, 0, sizeof(struct iwl_mvm_add_sta_cmd_v6));
+	memset(&cmd, 0, sizeof(struct iwl_mvm_add_sta_cmd_v7));
 	cmd.sta_id = sta->sta_id;
 	cmd.mac_id_n_color = cpu_to_le32(FW_CMD_ID_AND_COLOR(mac_id,
 							     color));
@@ -735,7 +735,7 @@ int iwl_mvm_sta_rx_agg(struct iwl_mvm *mvm, struct ieee80211_sta *sta,
 		       int tid, u16 ssn, bool start)
 {
 	struct iwl_mvm_sta *mvm_sta = (void *)sta->drv_priv;
-	struct iwl_mvm_add_sta_cmd_v6 cmd = {};
+	struct iwl_mvm_add_sta_cmd_v7 cmd = {};
 	int ret;
 	u32 status;
 
@@ -794,7 +794,7 @@ static int iwl_mvm_sta_tx_agg(struct iwl_mvm *mvm, struct ieee80211_sta *sta,
 			      int tid, u8 queue, bool start)
 {
 	struct iwl_mvm_sta *mvm_sta = (void *)sta->drv_priv;
-	struct iwl_mvm_add_sta_cmd_v6 cmd = {};
+	struct iwl_mvm_add_sta_cmd_v7 cmd = {};
 	int ret;
 	u32 status;
 
@@ -833,7 +833,7 @@ static int iwl_mvm_sta_tx_agg(struct iwl_mvm *mvm, struct ieee80211_sta *sta,
 	return ret;
 }
 
-static const u8 tid_to_ac[] = {
+static const u8 tid_to_mac80211_ac[] = {
 	IEEE80211_AC_BE,
 	IEEE80211_AC_BK,
 	IEEE80211_AC_BK,
@@ -844,6 +844,17 @@ static const u8 tid_to_ac[] = {
 	IEEE80211_AC_VO,
 };
 
+static const u8 tid_to_ucode_ac[] = {
+	AC_BE,
+	AC_BK,
+	AC_BK,
+	AC_BE,
+	AC_VI,
+	AC_VI,
+	AC_VO,
+	AC_VO,
+};
+
 int iwl_mvm_sta_tx_agg_start(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
 			     struct ieee80211_sta *sta, u16 tid, u16 *ssn)
 {
@@ -874,7 +885,7 @@ int iwl_mvm_sta_tx_agg_start(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
 	}
 
 	/* the new tx queue is still connected to the same mac80211 queue */
-	mvm->queue_to_mac80211[txq_id] = vif->hw_queue[tid_to_ac[tid]];
+	mvm->queue_to_mac80211[txq_id] = vif->hw_queue[tid_to_mac80211_ac[tid]];
 
 	spin_lock_bh(&mvmsta->lock);
 	tid_data = &mvmsta->tid_data[tid];
@@ -916,7 +927,7 @@ int iwl_mvm_sta_tx_agg_oper(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
 	tid_data->ssn = 0xffff;
 	spin_unlock_bh(&mvmsta->lock);
 
-	fifo = iwl_mvm_ac_to_tx_fifo[tid_to_ac[tid]];
+	fifo = iwl_mvm_ac_to_tx_fifo[tid_to_mac80211_ac[tid]];
 
 	ret = iwl_mvm_sta_tx_agg(mvm, sta, tid, queue, true);
 	if (ret)
@@ -1411,7 +1422,7 @@ void iwl_mvm_sta_modify_ps_wake(struct iwl_mvm *mvm,
 				struct ieee80211_sta *sta)
 {
 	struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta);
-	struct iwl_mvm_add_sta_cmd_v6 cmd = {
+	struct iwl_mvm_add_sta_cmd_v7 cmd = {
 		.add_modify = STA_MODE_MODIFY,
 		.sta_id = mvmsta->sta_id,
 		.station_flags_msk = cpu_to_le32(STA_FLG_PS),
@@ -1427,28 +1438,102 @@ void iwl_mvm_sta_modify_ps_wake(struct iwl_mvm *mvm,
 void iwl_mvm_sta_modify_sleep_tx_count(struct iwl_mvm *mvm,
 				       struct ieee80211_sta *sta,
 				       enum ieee80211_frame_release_type reason,
-				       u16 cnt)
+				       u16 cnt, u16 tids, bool more_data,
+				       bool agg)
 {
-	u16 sleep_state_flags =
-		(reason == IEEE80211_FRAME_RELEASE_UAPSD) ?
-			STA_SLEEP_STATE_UAPSD : STA_SLEEP_STATE_PS_POLL;
 	struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta);
-	struct iwl_mvm_add_sta_cmd_v6 cmd = {
+	struct iwl_mvm_add_sta_cmd_v7 cmd = {
 		.add_modify = STA_MODE_MODIFY,
 		.sta_id = mvmsta->sta_id,
 		.modify_mask = STA_MODIFY_SLEEPING_STA_TX_COUNT,
 		.sleep_tx_count = cpu_to_le16(cnt),
 		.mac_id_n_color = cpu_to_le32(mvmsta->mac_id_n_color),
-		/*
-		 * Same modify mask for sleep_tx_count and sleep_state_flags so
-		 * we must set the sleep_state_flags too.
-		 */
-		.sleep_state_flags = cpu_to_le16(sleep_state_flags),
 	};
-	int ret;
+	int tid, ret;
+	unsigned long _tids = tids;
+
+	/* convert TIDs to ACs - we don't support TSPEC so that's OK
+	 * Note that this field is reserved and unused by firmware not
+	 * supporting GO uAPSD, so it's safe to always do this.
+	 */
+	for_each_set_bit(tid, &_tids, IWL_MAX_TID_COUNT)
+		cmd.awake_acs |= BIT(tid_to_ucode_ac[tid]);
+
+	/* If we're releasing frames from aggregation queues then check if the
+	 * all queues combined that we're releasing frames from have
+	 *  - more frames than the service period, in which case more_data
+	 *    needs to be set
+	 *  - fewer than 'cnt' frames, in which case we need to adjust the
+	 *    firmware command (but do that unconditionally)
+	 */
+	if (agg) {
+		int remaining = cnt;
+
+		spin_lock_bh(&mvmsta->lock);
+		for_each_set_bit(tid, &_tids, IWL_MAX_TID_COUNT) {
+			struct iwl_mvm_tid_data *tid_data;
+			u16 n_queued;
+
+			tid_data = &mvmsta->tid_data[tid];
+			if (WARN(tid_data->state != IWL_AGG_ON &&
+				 tid_data->state != IWL_EMPTYING_HW_QUEUE_DELBA,
+				 "TID %d state is %d\n",
+				 tid, tid_data->state)) {
+				spin_unlock_bh(&mvmsta->lock);
+				ieee80211_sta_eosp(sta);
+				return;
+			}
+
+			n_queued = iwl_mvm_tid_queued(tid_data);
+			if (n_queued > remaining) {
+				more_data = true;
+				remaining = 0;
+				break;
+			}
+			remaining -= n_queued;
+		}
+		spin_unlock_bh(&mvmsta->lock);
+
+		cmd.sleep_tx_count = cpu_to_le16(cnt - remaining);
+		if (WARN_ON(cnt - remaining == 0)) {
+			ieee80211_sta_eosp(sta);
+			return;
+		}
+	}
+
+	/* Note: this is ignored by firmware not supporting GO uAPSD */
+	if (more_data)
+		cmd.sleep_state_flags |= cpu_to_le16(STA_SLEEP_STATE_MOREDATA);
+
+	if (reason == IEEE80211_FRAME_RELEASE_PSPOLL) {
+		mvmsta->next_status_eosp = true;
+		cmd.sleep_state_flags |= cpu_to_le16(STA_SLEEP_STATE_PS_POLL);
+	} else {
+		cmd.sleep_state_flags |= cpu_to_le16(STA_SLEEP_STATE_UAPSD);
+	}
 
-	/* TODO: somehow the fw doesn't seem to take PS_POLL into account */
 	ret = iwl_mvm_send_add_sta_cmd(mvm, CMD_ASYNC, &cmd);
 	if (ret)
 		IWL_ERR(mvm, "Failed to send ADD_STA command (%d)\n", ret);
 }
+
+int iwl_mvm_rx_eosp_notif(struct iwl_mvm *mvm,
+			  struct iwl_rx_cmd_buffer *rxb,
+			  struct iwl_device_cmd *cmd)
+{
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
+	struct iwl_mvm_eosp_notification *notif = (void *)pkt->data;
+	struct ieee80211_sta *sta;
+	u32 sta_id = le32_to_cpu(notif->sta_id);
+
+	if (WARN_ON_ONCE(sta_id >= IWL_MVM_STATION_COUNT))
+		return 0;
+
+	rcu_read_lock();
+	sta = rcu_dereference(mvm->fw_id_to_mac_id[sta_id]);
+	if (!IS_ERR_OR_NULL(sta))
+		ieee80211_sta_eosp(sta);
+	rcu_read_unlock();
+
+	return 0;
+}
diff --git a/drivers/net/wireless/iwlwifi/mvm/sta.h b/drivers/net/wireless/iwlwifi/mvm/sta.h
index 4968d0237dc5..64f9a1bf7c43 100644
--- a/drivers/net/wireless/iwlwifi/mvm/sta.h
+++ b/drivers/net/wireless/iwlwifi/mvm/sta.h
@@ -195,24 +195,33 @@ struct iwl_mvm;
 /**
  * DOC: AP mode - PS
  *
- * When a station is asleep, the fw will set it as "asleep". All the
- * non-aggregation frames to that station will be dropped by the fw
- * (%TX_STATUS_FAIL_DEST_PS failure code).
+ * When a station is asleep, the fw will set it as "asleep". All frames on
+ * shared queues (i.e. non-aggregation queues) to that station will be dropped
+ * by the fw (%TX_STATUS_FAIL_DEST_PS failure code).
+ *
  * AMPDUs are in a separate queue that is stopped by the fw. We just need to
- * let mac80211 know how many frames we have in these queues so that it can
+ * let mac80211 know when there are frames in these queues so that it can
  * properly handle trigger frames.
- * When the a trigger frame is received, mac80211 tells the driver to send
- * frames from the AMPDU queues or AC queue depending on which queue are
- * delivery-enabled and what TID has frames to transmit (Note that mac80211 has
- * all the knowledege since all the non-agg frames are buffered / filtered, and
- * the driver tells mac80211 about agg frames). The driver needs to tell the fw
- * to let frames out even if the station is asleep. This is done by
- * %iwl_mvm_sta_modify_sleep_tx_count.
- * When we receive a frame from that station with PM bit unset, the
- * driver needs to let the fw know that this station isn't alseep any more.
- * This is done by %iwl_mvm_sta_modify_ps_wake.
- *
- * TODO - EOSP handling
+ *
+ * When a trigger frame is received, mac80211 tells the driver to send frames
+ * from the AMPDU queues or sends frames to non-aggregation queues itself,
+ * depending on which ACs are delivery-enabled and what TID has frames to
+ * transmit. Note that mac80211 has all the knowledege since all the non-agg
+ * frames are buffered / filtered, and the driver tells mac80211 about agg
+ * frames). The driver needs to tell the fw to let frames out even if the
+ * station is asleep. This is done by %iwl_mvm_sta_modify_sleep_tx_count.
+ *
+ * When we receive a frame from that station with PM bit unset, the driver
+ * needs to let the fw know that this station isn't asleep any more. This is
+ * done by %iwl_mvm_sta_modify_ps_wake in response to mac80211 signalling the
+ * station's wakeup.
+ *
+ * For a GO, the Service Period might be cut short due to an absence period
+ * of the GO. In this (and all other cases) the firmware notifies us with the
+ * EOSP_NOTIFICATION, and we notify mac80211 of that. Further frames that we
+ * already sent to the device will be rejected again.
+ *
+ * See also "AP support for powersaving clients" in mac80211.h.
  */
 
 /**
@@ -261,6 +270,12 @@ struct iwl_mvm_tid_data {
 	u16 ssn;
 };
 
+static inline u16 iwl_mvm_tid_queued(struct iwl_mvm_tid_data *tid_data)
+{
+	return ieee80211_sn_sub(IEEE80211_SEQ_TO_SN(tid_data->seq_number),
+				tid_data->next_reclaimed);
+}
+
 /**
  * struct iwl_mvm_sta - representation of a station in the driver
  * @sta_id: the index of the station in the fw (will be replaced by id_n_color)
@@ -270,6 +285,8 @@ struct iwl_mvm_tid_data {
  *	tid.
  * @max_agg_bufsize: the maximal size of the AGG buffer for this station
  * @bt_reduced_txpower: is reduced tx power enabled for this station
+ * @next_status_eosp: the next reclaimed packet is a PS-Poll response and
+ *	we need to signal the EOSP
  * @lock: lock to protect the whole struct. Since %tid_data is access from Tx
  * and from Tx response flow, it needs a spinlock.
  * @tid_data: per tid data. Look at %iwl_mvm_tid_data.
@@ -288,6 +305,7 @@ struct iwl_mvm_sta {
 	u16 tid_disable_agg;
 	u8 max_agg_bufsize;
 	bool bt_reduced_txpower;
+	bool next_status_eosp;
 	spinlock_t lock;
 	struct iwl_mvm_tid_data tid_data[IWL_MAX_TID_COUNT];
 	struct iwl_lq_sta lq_sta;
@@ -345,6 +363,10 @@ void iwl_mvm_update_tkip_key(struct iwl_mvm *mvm,
 			     struct ieee80211_sta *sta, u32 iv32,
 			     u16 *phase1key);
 
+int iwl_mvm_rx_eosp_notif(struct iwl_mvm *mvm,
+			  struct iwl_rx_cmd_buffer *rxb,
+			  struct iwl_device_cmd *cmd);
+
 /* AMPDU */
 int iwl_mvm_sta_rx_agg(struct iwl_mvm *mvm, struct ieee80211_sta *sta,
 		       int tid, u16 ssn, bool start);
@@ -375,7 +397,8 @@ void iwl_mvm_sta_modify_ps_wake(struct iwl_mvm *mvm,
 void iwl_mvm_sta_modify_sleep_tx_count(struct iwl_mvm *mvm,
 				       struct ieee80211_sta *sta,
 				       enum ieee80211_frame_release_type reason,
-				       u16 cnt);
+				       u16 cnt, u16 tids, bool more_data,
+				       bool agg);
 int iwl_mvm_drain_sta(struct iwl_mvm *mvm, struct iwl_mvm_sta *mvmsta,
 		      bool drain);
 
diff --git a/drivers/net/wireless/iwlwifi/mvm/tx.c b/drivers/net/wireless/iwlwifi/mvm/tx.c
index 90378c217bc7..8d18bf23e4bf 100644
--- a/drivers/net/wireless/iwlwifi/mvm/tx.c
+++ b/drivers/net/wireless/iwlwifi/mvm/tx.c
@@ -377,6 +377,13 @@ int iwl_mvm_tx_skb(struct iwl_mvm *mvm, struct sk_buff *skb,
 	tx_cmd = (struct iwl_tx_cmd *)dev_cmd->payload;
 	/* From now on, we cannot access info->control */
 
+	/*
+	 * we handle that entirely ourselves -- for uAPSD the firmware
+	 * will always send a notification, and for PS-Poll responses
+	 * we'll notify mac80211 when getting frame status
+	 */
+	info->flags &= ~IEEE80211_TX_STATUS_EOSP;
+
 	spin_lock(&mvmsta->lock);
 
 	if (ieee80211_is_data_qos(fc) && !ieee80211_is_qos_nullfunc(fc)) {
@@ -437,6 +444,17 @@ static void iwl_mvm_check_ratid_empty(struct iwl_mvm *mvm,
 
 	lockdep_assert_held(&mvmsta->lock);
 
+	if ((tid_data->state == IWL_AGG_ON ||
+	     tid_data->state == IWL_EMPTYING_HW_QUEUE_DELBA) &&
+	    iwl_mvm_tid_queued(tid_data) == 0) {
+		/*
+		 * Now that this aggregation queue is empty tell mac80211 so it
+		 * knows we no longer have frames buffered for the station on
+		 * this TID (for the TIM bitmap calculation.)
+		 */
+		ieee80211_sta_set_buffered(sta, tid, false);
+	}
+
 	if (tid_data->ssn != tid_data->next_reclaimed)
 		return;
 
@@ -674,6 +692,11 @@ static void iwl_mvm_rx_tx_cmd_single(struct iwl_mvm *mvm,
 			iwl_mvm_check_ratid_empty(mvm, sta, tid);
 			spin_unlock_bh(&mvmsta->lock);
 		}
+
+		if (mvmsta->next_status_eosp) {
+			mvmsta->next_status_eosp = false;
+			ieee80211_sta_eosp(sta);
+		}
 	} else {
 		sta = NULL;
 		mvmsta = NULL;
-- 
cgit v1.2.2


From 503ab8c56ca0ffc64a60f192751f4ce33bbeb9e8 Mon Sep 17 00:00:00 2001
From: Eran Harary <eran.harary@intel.com>
Date: Wed, 20 Nov 2013 07:28:58 +0200
Subject: iwlwifi: Add 8000 HW family support

add 8000-family configuration to iwl_cfg struct.

Signed-off-by: Eran Harary <eran.harary@intel.com>
Reviewed-by: Dor Shaish <dor.shaish@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/Makefile     |   2 +-
 drivers/net/wireless/iwlwifi/iwl-8000.c   | 120 ++++++++++++++++++++++++++++++
 drivers/net/wireless/iwlwifi/iwl-config.h |   2 +
 drivers/net/wireless/iwlwifi/pcie/drv.c   |   4 +
 4 files changed, 127 insertions(+), 1 deletion(-)
 create mode 100644 drivers/net/wireless/iwlwifi/iwl-8000.c

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/Makefile b/drivers/net/wireless/iwlwifi/Makefile
index 1fa64429bcc2..3d32f4120174 100644
--- a/drivers/net/wireless/iwlwifi/Makefile
+++ b/drivers/net/wireless/iwlwifi/Makefile
@@ -8,7 +8,7 @@ iwlwifi-objs		+= iwl-eeprom-read.o iwl-eeprom-parse.o
 iwlwifi-objs		+= iwl-phy-db.o iwl-nvm-parse.o
 iwlwifi-objs		+= pcie/drv.o pcie/rx.o pcie/tx.o pcie/trans.o
 iwlwifi-$(CONFIG_IWLDVM) += iwl-1000.o iwl-2000.o iwl-5000.o iwl-6000.o
-iwlwifi-$(CONFIG_IWLMVM) += iwl-7000.o
+iwlwifi-$(CONFIG_IWLMVM) += iwl-7000.o iwl-8000.o
 
 iwlwifi-objs += $(iwlwifi-m)
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-8000.c b/drivers/net/wireless/iwlwifi/iwl-8000.c
new file mode 100644
index 000000000000..feca7a70174f
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/iwl-8000.c
@@ -0,0 +1,120 @@
+/******************************************************************************
+ *
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2014 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called COPYING.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *  * Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  * Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  * Neither the name Intel Corporation nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *****************************************************************************/
+
+#include <linux/module.h>
+#include <linux/stringify.h>
+#include "iwl-config.h"
+#include "iwl-agn-hw.h"
+
+/* Highest firmware API version supported */
+#define IWL8000_UCODE_API_MAX	8
+
+/* Oldest version we won't warn about */
+#define IWL8000_UCODE_API_OK	8
+
+/* Lowest firmware API version supported */
+#define IWL8000_UCODE_API_MIN	8
+
+/* NVM versions */
+#define IWL8000_NVM_VERSION		0x0a1d
+#define IWL8000_TX_POWER_VERSION	0xffff /* meaningless */
+
+#define IWL8000_FW_PRE "iwlwifi-8000-"
+#define IWL8000_MODULE_FIRMWARE(api) IWL8000_FW_PRE __stringify(api) ".ucode"
+
+static const struct iwl_base_params iwl8000_base_params = {
+	.eeprom_size = OTP_LOW_IMAGE_SIZE,
+	.num_of_queues = IWLAGN_NUM_QUEUES,
+	.pll_cfg_val = 0,
+	.shadow_ram_support = true,
+	.led_compensation = 57,
+	.wd_timeout = IWL_LONG_WD_TIMEOUT,
+	.max_event_log_size = 512,
+	.shadow_reg_enable = true,
+	.pcie_l1_allowed = true,
+};
+
+static const struct iwl_ht_params iwl8000_ht_params = {
+	.ht40_bands = BIT(IEEE80211_BAND_2GHZ) | BIT(IEEE80211_BAND_5GHZ),
+};
+
+#define IWL_DEVICE_8000						\
+	.ucode_api_max = IWL8000_UCODE_API_MAX,			\
+	.ucode_api_ok = IWL8000_UCODE_API_OK,			\
+	.ucode_api_min = IWL8000_UCODE_API_MIN,			\
+	.device_family = IWL_DEVICE_FAMILY_8000,		\
+	.max_inst_size = IWL60_RTC_INST_SIZE,			\
+	.max_data_size = IWL60_RTC_DATA_SIZE,			\
+	.base_params = &iwl8000_base_params,			\
+	.led_mode = IWL_LED_RF_STATE
+
+const struct iwl_cfg iwl8260_2ac_cfg = {
+	.name = "Intel(R) Dual Band Wireless AC 8260",
+	.fw_name_pre = IWL8000_FW_PRE,
+	IWL_DEVICE_8000,
+	.ht_params = &iwl8000_ht_params,
+	.nvm_ver = IWL8000_NVM_VERSION,
+	.nvm_calib_ver = IWL8000_TX_POWER_VERSION,
+};
+
+MODULE_FIRMWARE(IWL8000_MODULE_FIRMWARE(IWL8000_UCODE_API_OK));
diff --git a/drivers/net/wireless/iwlwifi/iwl-config.h b/drivers/net/wireless/iwlwifi/iwl-config.h
index 1ced525157dc..5b7492448886 100644
--- a/drivers/net/wireless/iwlwifi/iwl-config.h
+++ b/drivers/net/wireless/iwlwifi/iwl-config.h
@@ -84,6 +84,7 @@ enum iwl_device_family {
 	IWL_DEVICE_FAMILY_6050,
 	IWL_DEVICE_FAMILY_6150,
 	IWL_DEVICE_FAMILY_7000,
+	IWL_DEVICE_FAMILY_8000,
 };
 
 /*
@@ -307,6 +308,7 @@ extern const struct iwl_cfg iwl3160_n_cfg;
 extern const struct iwl_cfg iwl7265_2ac_cfg;
 extern const struct iwl_cfg iwl7265_2n_cfg;
 extern const struct iwl_cfg iwl7265_n_cfg;
+extern const struct iwl_cfg iwl8260_2ac_cfg;
 #endif /* CONFIG_IWLMVM */
 
 #endif /* __IWL_CONFIG_H__ */
diff --git a/drivers/net/wireless/iwlwifi/pcie/drv.c b/drivers/net/wireless/iwlwifi/pcie/drv.c
index 3040924f5f3c..4b3a49b11d48 100644
--- a/drivers/net/wireless/iwlwifi/pcie/drv.c
+++ b/drivers/net/wireless/iwlwifi/pcie/drv.c
@@ -385,6 +385,10 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = {
 	{IWL_PCI_DEVICE(0x095A, 0x5590, iwl7265_2ac_cfg)},
 	{IWL_PCI_DEVICE(0x095B, 0x5290, iwl7265_2ac_cfg)},
 	{IWL_PCI_DEVICE(0x095A, 0x5490, iwl7265_2ac_cfg)},
+
+/* 8000 Series */
+	{IWL_PCI_DEVICE(0x24F3, 0x0010, iwl8260_2ac_cfg)},
+	{IWL_PCI_DEVICE(0x24F4, 0x0030, iwl8260_2ac_cfg)},
 #endif /* CONFIG_IWLMVM */
 
 	{0}
-- 
cgit v1.2.2


From ae2b21b0d92ea36af72c6a57f8c32376858186d7 Mon Sep 17 00:00:00 2001
From: Eran Harary <eran.harary@intel.com>
Date: Thu, 9 Jan 2014 08:08:24 +0200
Subject: iwlwifi: mvm: support NVM sections for family 8000

The identification of the hardware section in the NVM
of new devices has been changed, hence the need to add it
to iwl_cfg and adapt the code that uses this value
accordingly.

Signed-off-by: Eran Harary <eran.harary@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-7000.c   |  5 ++++-
 drivers/net/wireless/iwlwifi/iwl-8000.c   |  5 ++++-
 drivers/net/wireless/iwlwifi/iwl-config.h |  2 ++
 drivers/net/wireless/iwlwifi/mvm/fw-api.h | 12 ++++-------
 drivers/net/wireless/iwlwifi/mvm/mvm.h    |  2 +-
 drivers/net/wireless/iwlwifi/mvm/nvm.c    | 34 +++++++++++++++++--------------
 drivers/net/wireless/iwlwifi/mvm/ops.c    |  2 +-
 7 files changed, 35 insertions(+), 27 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-7000.c b/drivers/net/wireless/iwlwifi/iwl-7000.c
index 2a59da2ff87a..1270f0c2f366 100644
--- a/drivers/net/wireless/iwlwifi/iwl-7000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-7000.c
@@ -95,6 +95,8 @@
 #define IWL7265_FW_PRE "iwlwifi-7265-"
 #define IWL7265_MODULE_FIRMWARE(api) IWL7265_FW_PRE __stringify(api) ".ucode"
 
+#define NVM_HW_SECTION_NUM_FAMILY_7000		0
+
 static const struct iwl_base_params iwl7000_base_params = {
 	.eeprom_size = OTP_LOW_IMAGE_SIZE,
 	.num_of_queues = IWLAGN_NUM_QUEUES,
@@ -120,7 +122,8 @@ static const struct iwl_ht_params iwl7000_ht_params = {
 	.max_inst_size = IWL60_RTC_INST_SIZE,			\
 	.max_data_size = IWL60_RTC_DATA_SIZE,			\
 	.base_params = &iwl7000_base_params,			\
-	.led_mode = IWL_LED_RF_STATE
+	.led_mode = IWL_LED_RF_STATE,				\
+	.nvm_hw_section_num = NVM_HW_SECTION_NUM_FAMILY_7000
 
 
 const struct iwl_cfg iwl7260_2ac_cfg = {
diff --git a/drivers/net/wireless/iwlwifi/iwl-8000.c b/drivers/net/wireless/iwlwifi/iwl-8000.c
index feca7a70174f..81c12245c01f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-8000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-8000.c
@@ -82,6 +82,8 @@
 #define IWL8000_FW_PRE "iwlwifi-8000-"
 #define IWL8000_MODULE_FIRMWARE(api) IWL8000_FW_PRE __stringify(api) ".ucode"
 
+#define NVM_HW_SECTION_NUM_FAMILY_8000		10
+
 static const struct iwl_base_params iwl8000_base_params = {
 	.eeprom_size = OTP_LOW_IMAGE_SIZE,
 	.num_of_queues = IWLAGN_NUM_QUEUES,
@@ -106,7 +108,8 @@ static const struct iwl_ht_params iwl8000_ht_params = {
 	.max_inst_size = IWL60_RTC_INST_SIZE,			\
 	.max_data_size = IWL60_RTC_DATA_SIZE,			\
 	.base_params = &iwl8000_base_params,			\
-	.led_mode = IWL_LED_RF_STATE
+	.led_mode = IWL_LED_RF_STATE,				\
+	.nvm_hw_section_num = NVM_HW_SECTION_NUM_FAMILY_8000
 
 const struct iwl_cfg iwl8260_2ac_cfg = {
 	.name = "Intel(R) Dual Band Wireless AC 8260",
diff --git a/drivers/net/wireless/iwlwifi/iwl-config.h b/drivers/net/wireless/iwlwifi/iwl-config.h
index 5b7492448886..df7d409023b6 100644
--- a/drivers/net/wireless/iwlwifi/iwl-config.h
+++ b/drivers/net/wireless/iwlwifi/iwl-config.h
@@ -218,6 +218,7 @@ struct iwl_eeprom_params {
  * @high_temp: Is this NIC is designated to be in high temperature.
  * @host_interrupt_operation_mode: device needs host interrupt operation
  *	mode set
+ * @nvm_hw_section_num: the ID of the HW NVM section
  *
  * We enable the driver to be backward compatible wrt. hardware features.
  * API differences in uCode shouldn't be handled here but through TLVs
@@ -248,6 +249,7 @@ struct iwl_cfg {
 	const bool internal_wimax_coex;
 	const bool host_interrupt_operation_mode;
 	bool high_temp;
+	u8   nvm_hw_section_num;
 };
 
 /*
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/iwlwifi/mvm/fw-api.h
index a043a1f2f06f..21ee59e88b85 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api.h
@@ -304,6 +304,7 @@ struct iwl_phy_cfg_cmd {
 #define PHY_CFG_RX_CHAIN_B	BIT(13)
 #define PHY_CFG_RX_CHAIN_C	BIT(14)
 
+#define NVM_MAX_NUM_SECTIONS	11
 
 /* Target of the NVM_ACCESS_CMD */
 enum {
@@ -314,14 +315,9 @@ enum {
 
 /* Section types for NVM_ACCESS_CMD */
 enum {
-	NVM_SECTION_TYPE_HW = 0,
-	NVM_SECTION_TYPE_SW,
-	NVM_SECTION_TYPE_PAPD,
-	NVM_SECTION_TYPE_BT,
-	NVM_SECTION_TYPE_CALIBRATION,
-	NVM_SECTION_TYPE_PRODUCTION,
-	NVM_SECTION_TYPE_POST_FCS_CALIB,
-	NVM_NUM_OF_SECTIONS,
+	NVM_SECTION_TYPE_SW = 1,
+	NVM_SECTION_TYPE_CALIBRATION = 4,
+	NVM_SECTION_TYPE_PRODUCTION = 5,
 };
 
 /**
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index e4ead86f06d6..bf13c462a1f4 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -470,7 +470,7 @@ struct iwl_mvm {
 
 	struct iwl_nvm_data *nvm_data;
 	/* NVM sections */
-	struct iwl_nvm_section nvm_sections[NVM_NUM_OF_SECTIONS];
+	struct iwl_nvm_section nvm_sections[NVM_MAX_NUM_SECTIONS];
 
 	/* EEPROM MAC addresses */
 	struct mac_address addresses[IWL_MVM_MAX_ADDRESSES];
diff --git a/drivers/net/wireless/iwlwifi/mvm/nvm.c b/drivers/net/wireless/iwlwifi/mvm/nvm.c
index 35b71af78d02..2d5251b3600c 100644
--- a/drivers/net/wireless/iwlwifi/mvm/nvm.c
+++ b/drivers/net/wireless/iwlwifi/mvm/nvm.c
@@ -67,14 +67,6 @@
 #include "iwl-eeprom-read.h"
 #include "iwl-nvm-parse.h"
 
-/* list of NVM sections we are allowed/need to read */
-static const int nvm_to_read[] = {
-	NVM_SECTION_TYPE_HW,
-	NVM_SECTION_TYPE_SW,
-	NVM_SECTION_TYPE_CALIBRATION,
-	NVM_SECTION_TYPE_PRODUCTION,
-};
-
 /* Default NVM size to read */
 #define IWL_NVM_DEFAULT_CHUNK_SIZE (2*1024)
 #define IWL_MAX_NVM_SECTION_SIZE 7000
@@ -240,7 +232,7 @@ iwl_parse_nvm_sections(struct iwl_mvm *mvm)
 
 	/* Checking for required sections */
 	if (!mvm->nvm_sections[NVM_SECTION_TYPE_SW].data ||
-	    !mvm->nvm_sections[NVM_SECTION_TYPE_HW].data) {
+	    !mvm->nvm_sections[mvm->cfg->nvm_hw_section_num].data) {
 		IWL_ERR(mvm, "Can't parse empty NVM sections\n");
 		return NULL;
 	}
@@ -248,7 +240,7 @@ iwl_parse_nvm_sections(struct iwl_mvm *mvm)
 	if (WARN_ON(!mvm->cfg))
 		return NULL;
 
-	hw = (const __le16 *)sections[NVM_SECTION_TYPE_HW].data;
+	hw = (const __le16 *)sections[mvm->cfg->nvm_hw_section_num].data;
 	sw = (const __le16 *)sections[NVM_SECTION_TYPE_SW].data;
 	calib = (const __le16 *)sections[NVM_SECTION_TYPE_CALIBRATION].data;
 	return iwl_parse_nvm_data(mvm->trans->dev, mvm->cfg, hw, sw, calib,
@@ -367,7 +359,7 @@ static int iwl_mvm_read_external_nvm(struct iwl_mvm *mvm)
 			break;
 		}
 
-		if (WARN(section_id >= NVM_NUM_OF_SECTIONS,
+		if (WARN(section_id >= NVM_MAX_NUM_SECTIONS,
 			 "Invalid NVM section ID %d\n", section_id)) {
 			ret = -EINVAL;
 			break;
@@ -415,6 +407,9 @@ int iwl_nvm_init(struct iwl_mvm *mvm)
 	int ret, i, section;
 	u8 *nvm_buffer, *temp;
 
+	if (WARN_ON_ONCE(mvm->cfg->nvm_hw_section_num >= NVM_MAX_NUM_SECTIONS))
+		return -EINVAL;
+
 	/* load external NVM if configured */
 	if (iwlwifi_mod_params.nvm_file) {
 		/* move to External NVM flow */
@@ -422,6 +417,14 @@ int iwl_nvm_init(struct iwl_mvm *mvm)
 		if (ret)
 			return ret;
 	} else {
+		/* list of NVM sections we are allowed/need to read */
+		int nvm_to_read[] = {
+			mvm->cfg->nvm_hw_section_num,
+			NVM_SECTION_TYPE_SW,
+			NVM_SECTION_TYPE_CALIBRATION,
+			NVM_SECTION_TYPE_PRODUCTION,
+		};
+
 		/* Read From FW NVM */
 		IWL_DEBUG_EEPROM(mvm->trans->dev, "Read from NVM\n");
 
@@ -446,10 +449,6 @@ int iwl_nvm_init(struct iwl_mvm *mvm)
 
 #ifdef CONFIG_IWLWIFI_DEBUGFS
 			switch (section) {
-			case NVM_SECTION_TYPE_HW:
-				mvm->nvm_hw_blob.data = temp;
-				mvm->nvm_hw_blob.size = ret;
-				break;
 			case NVM_SECTION_TYPE_SW:
 				mvm->nvm_sw_blob.data = temp;
 				mvm->nvm_sw_blob.size  = ret;
@@ -463,6 +462,11 @@ int iwl_nvm_init(struct iwl_mvm *mvm)
 				mvm->nvm_prod_blob.size  = ret;
 				break;
 			default:
+				if (section == mvm->cfg->nvm_hw_section_num) {
+					mvm->nvm_hw_blob.data = temp;
+					mvm->nvm_hw_blob.size = ret;
+					break;
+				}
 				WARN(1, "section: %d", section);
 			}
 #endif
diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c
index a65eeb335cfb..7a2e4880e944 100644
--- a/drivers/net/wireless/iwlwifi/mvm/ops.c
+++ b/drivers/net/wireless/iwlwifi/mvm/ops.c
@@ -511,7 +511,7 @@ static void iwl_op_mode_mvm_stop(struct iwl_op_mode *op_mode)
 	mvm->phy_db = NULL;
 
 	iwl_free_nvm_data(mvm->nvm_data);
-	for (i = 0; i < NVM_NUM_OF_SECTIONS; i++)
+	for (i = 0; i < NVM_MAX_NUM_SECTIONS; i++)
 		kfree(mvm->nvm_sections[i].data);
 
 	ieee80211_free_hw(mvm->hw);
-- 
cgit v1.2.2


From 3073d8c0c51c0b766d35ae3beb6b29948be2ee00 Mon Sep 17 00:00:00 2001
From: Eran Harary <eran.harary@intel.com>
Date: Sun, 29 Dec 2013 14:09:59 +0200
Subject: iwlwifi: pcie: disable APMG configurations for family 8000

APMG HW block was removed in this NIC, hence, no need to
configure it.

Signed-off-by: Eran Harary <eran.harary@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/ops.c    |  7 ++++---
 drivers/net/wireless/iwlwifi/pcie/trans.c | 27 ++++++++++++++++-----------
 drivers/net/wireless/iwlwifi/pcie/tx.c    |  5 +++--
 3 files changed, 23 insertions(+), 16 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c
index 7a2e4880e944..f38ed9fb356a 100644
--- a/drivers/net/wireless/iwlwifi/mvm/ops.c
+++ b/drivers/net/wireless/iwlwifi/mvm/ops.c
@@ -185,9 +185,10 @@ static void iwl_mvm_nic_config(struct iwl_op_mode *op_mode)
 	 * (PCIe power is lost before PERST# is asserted), causing ME FW
 	 * to lose ownership and not being able to obtain it back.
 	 */
-	iwl_set_bits_mask_prph(mvm->trans, APMG_PS_CTRL_REG,
-			       APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS,
-			       ~APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS);
+	if (mvm->trans->cfg->device_family != IWL_DEVICE_FAMILY_8000)
+		iwl_set_bits_mask_prph(mvm->trans, APMG_PS_CTRL_REG,
+				       APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS,
+				       ~APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS);
 }
 
 struct iwl_rx_handlers {
diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c
index f9507807b486..f7e85d319299 100644
--- a/drivers/net/wireless/iwlwifi/pcie/trans.c
+++ b/drivers/net/wireless/iwlwifi/pcie/trans.c
@@ -203,19 +203,23 @@ static int iwl_pcie_apm_init(struct iwl_trans *trans)
 	/*
 	 * Enable DMA clock and wait for it to stabilize.
 	 *
-	 * Write to "CLK_EN_REG"; "1" bits enable clocks, while "0" bits
-	 * do not disable clocks.  This preserves any hardware bits already
-	 * set by default in "CLK_CTRL_REG" after reset.
+	 * Write to "CLK_EN_REG"; "1" bits enable clocks, while "0"
+	 * bits do not disable clocks.  This preserves any hardware
+	 * bits already set by default in "CLK_CTRL_REG" after reset.
 	 */
-	iwl_write_prph(trans, APMG_CLK_EN_REG, APMG_CLK_VAL_DMA_CLK_RQT);
-	udelay(20);
+	if (trans->cfg->device_family != IWL_DEVICE_FAMILY_8000) {
+		iwl_write_prph(trans, APMG_CLK_EN_REG,
+			       APMG_CLK_VAL_DMA_CLK_RQT);
+		udelay(20);
 
-	/* Disable L1-Active */
-	iwl_set_bits_prph(trans, APMG_PCIDEV_STT_REG,
-			  APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
+		/* Disable L1-Active */
+		iwl_set_bits_prph(trans, APMG_PCIDEV_STT_REG,
+				  APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
 
-	/* Clear the interrupt in APMG if the NIC is in RFKILL */
-	iwl_write_prph(trans, APMG_RTC_INT_STT_REG, APMG_RTC_INT_STT_RFKILL);
+		/* Clear the interrupt in APMG if the NIC is in RFKILL */
+		iwl_write_prph(trans, APMG_RTC_INT_STT_REG,
+			       APMG_RTC_INT_STT_RFKILL);
+	}
 
 	set_bit(STATUS_DEVICE_ENABLED, &trans->status);
 
@@ -273,7 +277,8 @@ static int iwl_pcie_nic_init(struct iwl_trans *trans)
 
 	spin_unlock(&trans_pcie->irq_lock);
 
-	iwl_pcie_set_pwr(trans, false);
+	if (trans->cfg->device_family != IWL_DEVICE_FAMILY_8000)
+		iwl_pcie_set_pwr(trans, false);
 
 	iwl_op_mode_nic_config(trans->op_mode);
 
diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c
index 3d549008b3e2..254126447c68 100644
--- a/drivers/net/wireless/iwlwifi/pcie/tx.c
+++ b/drivers/net/wireless/iwlwifi/pcie/tx.c
@@ -705,8 +705,9 @@ void iwl_pcie_tx_start(struct iwl_trans *trans, u32 scd_base_addr)
 			   reg_val | FH_TX_CHICKEN_BITS_SCD_AUTO_RETRY_EN);
 
 	/* Enable L1-Active */
-	iwl_clear_bits_prph(trans, APMG_PCIDEV_STT_REG,
-			    APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
+	if (trans->cfg->device_family != IWL_DEVICE_FAMILY_8000)
+		iwl_clear_bits_prph(trans, APMG_PCIDEV_STT_REG,
+				    APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
 }
 
 void iwl_trans_pcie_tx_reset(struct iwl_trans *trans)
-- 
cgit v1.2.2


From e12ba844acc0cc212adef6c2d5f9251ea787c822 Mon Sep 17 00:00:00 2001
From: Eran Harary <eran.harary@intel.com>
Date: Mon, 2 Dec 2013 12:18:10 +0200
Subject: iwlwifi: pcie: change CSR reset in family 8000

This register is not present in 8000 family devices.
There is prph register instead.

Signed-off-by: Eran Harary <eran.harary@intel.com>
Reviewed-by: Dor Shaish <dor.shaish@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-prph.h   | 7 +++++++
 drivers/net/wireless/iwlwifi/pcie/trans.c | 6 ++++++
 2 files changed, 13 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h
index 100bd0d79681..fc3b6bee7734 100644
--- a/drivers/net/wireless/iwlwifi/iwl-prph.h
+++ b/drivers/net/wireless/iwlwifi/iwl-prph.h
@@ -105,6 +105,13 @@
 /* Device NMI register */
 #define DEVICE_SET_NMI_REG 0x00a01c30
 
+/*
+ * Device reset for family 8000
+ * write to bit 24 in order to reset the CPU
+*/
+#define RELEASE_CPU_RESET		(0x300C)
+#define RELEASE_CPU_RESET_BIT		BIT(24)
+
 /*****************************************************************************
  *                        7000/3000 series SHR DTS addresses                 *
  *****************************************************************************/
diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c
index f7e85d319299..53a34573f0f0 100644
--- a/drivers/net/wireless/iwlwifi/pcie/trans.c
+++ b/drivers/net/wireless/iwlwifi/pcie/trans.c
@@ -573,6 +573,12 @@ static int iwl_pcie_load_given_ucode(struct iwl_trans *trans,
 		}
 	}
 
+	/* release CPU reset */
+	if (trans->cfg->device_family == IWL_DEVICE_FAMILY_8000)
+		iwl_write_prph(trans, RELEASE_CPU_RESET, RELEASE_CPU_RESET_BIT);
+	else
+		iwl_write32(trans, CSR_RESET, 0);
+
 	return 0;
 }
 
-- 
cgit v1.2.2


From e4a9f8cea50406a57c8dc5429d9aca6429d82436 Mon Sep 17 00:00:00 2001
From: Eran Harary <eran.harary@intel.com>
Date: Sun, 22 Dec 2013 08:06:34 +0200
Subject: iwlwifi: pcie: Disable L0S exit timer for 8000 HW family

This configuration is invalid for this family.

Signed-off-by: Eran Harary <eran.harary@intel.com>
Reviewed-by: Dor Shaish <dor.shaish@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/pcie/trans.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c
index 53a34573f0f0..ff7d70da64f9 100644
--- a/drivers/net/wireless/iwlwifi/pcie/trans.c
+++ b/drivers/net/wireless/iwlwifi/pcie/trans.c
@@ -132,8 +132,9 @@ static int iwl_pcie_apm_init(struct iwl_trans *trans)
 	 */
 
 	/* Disable L0S exit timer (platform NMI Work/Around) */
-	iwl_set_bit(trans, CSR_GIO_CHICKEN_BITS,
-		    CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER);
+	if (trans->cfg->device_family != IWL_DEVICE_FAMILY_8000)
+		iwl_set_bit(trans, CSR_GIO_CHICKEN_BITS,
+			    CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER);
 
 	/*
 	 * Disable L0s without affecting L1;
-- 
cgit v1.2.2


From 189fa2faac49bce07c6c6d83eca21cbe5bf47411 Mon Sep 17 00:00:00 2001
From: Eran Harary <eran.harary@intel.com>
Date: Thu, 23 Jan 2014 16:26:32 +0200
Subject: iwlwifi: pcie: fix secure section / dual cpu firmware loading

Also handle the bypass mode in which the second CPU doesn't
interfere.

Signed-off-by: Eran Harary <eran.harary@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-csr.h    |  32 -----
 drivers/net/wireless/iwlwifi/iwl-io.c     |  15 +++
 drivers/net/wireless/iwlwifi/iwl-io.h     |   2 +
 drivers/net/wireless/iwlwifi/iwl-prph.h   |  39 ++++++
 drivers/net/wireless/iwlwifi/pcie/trans.c | 191 ++++++++++++++++--------------
 5 files changed, 159 insertions(+), 120 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-csr.h b/drivers/net/wireless/iwlwifi/iwl-csr.h
index 9d325516c42d..f13dec9ad9c9 100644
--- a/drivers/net/wireless/iwlwifi/iwl-csr.h
+++ b/drivers/net/wireless/iwlwifi/iwl-csr.h
@@ -395,38 +395,6 @@
 #define CSR_DRAM_INT_TBL_ENABLE		(1 << 31)
 #define CSR_DRAM_INIT_TBL_WRAP_CHECK	(1 << 27)
 
-/* SECURE boot registers */
-#define CSR_SECURE_BOOT_CONFIG_ADDR	(0x100)
-enum secure_boot_config_reg {
-	CSR_SECURE_BOOT_CONFIG_INSPECTOR_BURNED_IN_OTP	= 0x00000001,
-	CSR_SECURE_BOOT_CONFIG_INSPECTOR_NOT_REQ	= 0x00000002,
-};
-
-#define CSR_SECURE_BOOT_CPU1_STATUS_ADDR	(0x100)
-#define CSR_SECURE_BOOT_CPU2_STATUS_ADDR	(0x100)
-enum secure_boot_status_reg {
-	CSR_SECURE_BOOT_CPU_STATUS_VERF_STATUS		= 0x00000003,
-	CSR_SECURE_BOOT_CPU_STATUS_VERF_COMPLETED	= 0x00000002,
-	CSR_SECURE_BOOT_CPU_STATUS_VERF_SUCCESS		= 0x00000004,
-	CSR_SECURE_BOOT_CPU_STATUS_VERF_FAIL		= 0x00000008,
-	CSR_SECURE_BOOT_CPU_STATUS_SIGN_VERF_FAIL	= 0x00000010,
-};
-
-#define CSR_UCODE_LOAD_STATUS_ADDR	(0x100)
-enum secure_load_status_reg {
-	CSR_CPU_STATUS_LOADING_STARTED			= 0x00000001,
-	CSR_CPU_STATUS_LOADING_COMPLETED		= 0x00000002,
-	CSR_CPU_STATUS_NUM_OF_LAST_COMPLETED		= 0x000000F8,
-	CSR_CPU_STATUS_NUM_OF_LAST_LOADED_BLOCK		= 0x0000FF00,
-};
-
-#define CSR_SECURE_INSPECTOR_CODE_ADDR	(0x100)
-#define CSR_SECURE_INSPECTOR_DATA_ADDR	(0x100)
-
-#define CSR_SECURE_TIME_OUT	(100)
-
-#define FH_TCSR_0_REG0 (0x1D00)
-
 /*
  * HBUS (Host-side Bus)
  *
diff --git a/drivers/net/wireless/iwlwifi/iwl-io.c b/drivers/net/wireless/iwlwifi/iwl-io.c
index f98175a0d35b..07372f2b0250 100644
--- a/drivers/net/wireless/iwlwifi/iwl-io.c
+++ b/drivers/net/wireless/iwlwifi/iwl-io.c
@@ -130,6 +130,21 @@ void iwl_write_prph(struct iwl_trans *trans, u32 ofs, u32 val)
 }
 IWL_EXPORT_SYMBOL(iwl_write_prph);
 
+int iwl_poll_prph_bit(struct iwl_trans *trans, u32 addr,
+		      u32 bits, u32 mask, int timeout)
+{
+	int t = 0;
+
+	do {
+		if ((iwl_read_prph(trans, addr) & mask) == (bits & mask))
+			return t;
+		udelay(IWL_POLL_INTERVAL);
+		t += IWL_POLL_INTERVAL;
+	} while (t < timeout);
+
+	return -ETIMEDOUT;
+}
+
 void iwl_set_bits_prph(struct iwl_trans *trans, u32 ofs, u32 mask)
 {
 	unsigned long flags;
diff --git a/drivers/net/wireless/iwlwifi/iwl-io.h b/drivers/net/wireless/iwlwifi/iwl-io.h
index c339c1bed080..9e81b23d738b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-io.h
+++ b/drivers/net/wireless/iwlwifi/iwl-io.h
@@ -72,6 +72,8 @@ void iwl_write_direct32(struct iwl_trans *trans, u32 reg, u32 value);
 
 u32 iwl_read_prph(struct iwl_trans *trans, u32 ofs);
 void iwl_write_prph(struct iwl_trans *trans, u32 ofs, u32 val);
+int iwl_poll_prph_bit(struct iwl_trans *trans, u32 addr,
+		      u32 bits, u32 mask, int timeout);
 void iwl_set_bits_prph(struct iwl_trans *trans, u32 ofs, u32 mask);
 void iwl_set_bits_mask_prph(struct iwl_trans *trans, u32 ofs,
 			    u32 bits, u32 mask);
diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h
index fc3b6bee7734..9c90186d1744 100644
--- a/drivers/net/wireless/iwlwifi/iwl-prph.h
+++ b/drivers/net/wireless/iwlwifi/iwl-prph.h
@@ -288,4 +288,43 @@ static inline unsigned int SCD_QUEUE_STATUS_BITS(unsigned int chnl)
 #define OSC_CLK				(0xa04068)
 #define OSC_CLK_FORCE_CONTROL		(0x8)
 
+/* SECURE boot registers */
+#define LMPM_SECURE_BOOT_CONFIG_ADDR	(0x100)
+enum secure_boot_config_reg {
+	LMPM_SECURE_BOOT_CONFIG_INSPECTOR_BURNED_IN_OTP	= 0x00000001,
+	LMPM_SECURE_BOOT_CONFIG_INSPECTOR_NOT_REQ	= 0x00000002,
+};
+
+#define LMPM_SECURE_BOOT_CPU1_STATUS_ADDR	(0x1E30)
+#define LMPM_SECURE_BOOT_CPU2_STATUS_ADDR	(0x1E34)
+enum secure_boot_status_reg {
+	LMPM_SECURE_BOOT_CPU_STATUS_VERF_STATUS		= 0x00000001,
+	LMPM_SECURE_BOOT_CPU_STATUS_VERF_COMPLETED	= 0x00000002,
+	LMPM_SECURE_BOOT_CPU_STATUS_VERF_SUCCESS	= 0x00000004,
+	LMPM_SECURE_BOOT_CPU_STATUS_VERF_FAIL		= 0x00000008,
+	LMPM_SECURE_BOOT_CPU_STATUS_SIGN_VERF_FAIL	= 0x00000010,
+	LMPM_SECURE_BOOT_STATUS_SUCCESS			= 0x00000003,
+};
+
+#define CSR_UCODE_LOAD_STATUS_ADDR	(0x1E70)
+enum secure_load_status_reg {
+	LMPM_CPU_UCODE_LOADING_STARTED			= 0x00000001,
+	LMPM_CPU_HDRS_LOADING_COMPLETED			= 0x00000003,
+	LMPM_CPU_UCODE_LOADING_COMPLETED		= 0x00000007,
+	LMPM_CPU_STATUS_NUM_OF_LAST_COMPLETED		= 0x000000F8,
+	LMPM_CPU_STATUS_NUM_OF_LAST_LOADED_BLOCK	= 0x0000FF00,
+};
+
+#define LMPM_SECURE_INSPECTOR_CODE_ADDR	(0x1E38)
+#define LMPM_SECURE_INSPECTOR_DATA_ADDR	(0x1E3C)
+#define LMPM_SECURE_UCODE_LOAD_CPU1_HDR_ADDR	(0x1E78)
+#define LMPM_SECURE_UCODE_LOAD_CPU2_HDR_ADDR	(0x1E7C)
+
+#define LMPM_SECURE_INSPECTOR_CODE_MEM_SPACE	(0x400000)
+#define LMPM_SECURE_INSPECTOR_DATA_MEM_SPACE	(0x402000)
+#define LMPM_SECURE_CPU1_HDR_MEM_SPACE		(0x420000)
+#define LMPM_SECURE_CPU2_HDR_MEM_SPACE		(0x420400)
+
+#define LMPM_SECURE_TIME_OUT	(100)
+
 #endif				/* __iwl_prph_h__ */
diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c
index ff7d70da64f9..7290f422be65 100644
--- a/drivers/net/wireless/iwlwifi/pcie/trans.c
+++ b/drivers/net/wireless/iwlwifi/pcie/trans.c
@@ -441,78 +441,87 @@ static int iwl_pcie_load_section(struct iwl_trans *trans, u8 section_num,
 	return ret;
 }
 
-static int iwl_pcie_secure_set(struct iwl_trans *trans, int cpu)
+static int iwl_pcie_load_cpu_secured_sections(struct iwl_trans *trans,
+					      const struct fw_img *image,
+					      int cpu)
 {
 	int shift_param;
-	u32 address;
-	int ret = 0;
+	u32 first_idx, last_idx;
+	int i, ret = 0;
 
 	if (cpu == 1) {
 		shift_param = 0;
-		address = CSR_SECURE_BOOT_CPU1_STATUS_ADDR;
+		first_idx = 0;
+		last_idx = 2;
 	} else {
 		shift_param = 16;
-		address = CSR_SECURE_BOOT_CPU2_STATUS_ADDR;
+		first_idx = 3;
+		last_idx = 5;
 	}
 
-	/* set CPU to started */
-	iwl_trans_set_bits_mask(trans,
-				CSR_UCODE_LOAD_STATUS_ADDR,
-				CSR_CPU_STATUS_LOADING_STARTED << shift_param,
-				1);
-
-	/* set last complete descriptor number */
-	iwl_trans_set_bits_mask(trans,
-				CSR_UCODE_LOAD_STATUS_ADDR,
-				CSR_CPU_STATUS_NUM_OF_LAST_COMPLETED
-				<< shift_param,
-				1);
-
-	/* set last loaded block */
-	iwl_trans_set_bits_mask(trans,
-				CSR_UCODE_LOAD_STATUS_ADDR,
-				CSR_CPU_STATUS_NUM_OF_LAST_LOADED_BLOCK
-				<< shift_param,
-				1);
+	for (i = first_idx; i <= last_idx; i++) {
+		if (!image->sec[i].data)
+			break;
+		if (i == first_idx + 1)
+			/* set CPU to started */
+			iwl_set_bits_prph(trans,
+					  CSR_UCODE_LOAD_STATUS_ADDR,
+					  LMPM_CPU_HDRS_LOADING_COMPLETED
+					  << shift_param);
 
-	/* image loading complete */
-	iwl_trans_set_bits_mask(trans,
-				CSR_UCODE_LOAD_STATUS_ADDR,
-				CSR_CPU_STATUS_LOADING_COMPLETED
-				<< shift_param,
-				1);
-
-	/* set FH_TCSR_0_REG  */
-	iwl_trans_set_bits_mask(trans, FH_TCSR_0_REG0, 0x00400000, 1);
-
-	/* verify image verification started  */
-	ret = iwl_poll_bit(trans, address,
-			   CSR_SECURE_BOOT_CPU_STATUS_VERF_STATUS,
-			   CSR_SECURE_BOOT_CPU_STATUS_VERF_STATUS,
-			   CSR_SECURE_TIME_OUT);
-	if (ret < 0) {
-		IWL_ERR(trans, "secure boot process didn't start\n");
-		return ret;
+		ret = iwl_pcie_load_section(trans, i, &image->sec[i]);
+		if (ret)
+			return ret;
 	}
+	/* image loading complete */
+	iwl_set_bits_prph(trans,
+			  CSR_UCODE_LOAD_STATUS_ADDR,
+			  LMPM_CPU_UCODE_LOADING_COMPLETED << shift_param);
 
-	/* wait for image verification to complete  */
-	ret = iwl_poll_bit(trans, address,
-			   CSR_SECURE_BOOT_CPU_STATUS_VERF_COMPLETED,
-			   CSR_SECURE_BOOT_CPU_STATUS_VERF_COMPLETED,
-			   CSR_SECURE_TIME_OUT);
+	return 0;
+}
 
-	if (ret < 0) {
-		IWL_ERR(trans, "Time out on secure boot process\n");
-		return ret;
+static int iwl_pcie_load_cpu_sections(struct iwl_trans *trans,
+				      const struct fw_img *image,
+				      int cpu)
+{
+	int shift_param;
+	u32 first_idx, last_idx;
+	int i, ret = 0;
+
+	if (cpu == 1) {
+		shift_param = 0;
+		first_idx = 0;
+		last_idx = 1;
+	} else {
+		shift_param = 16;
+		first_idx = 2;
+		last_idx = 3;
 	}
 
+	for (i = first_idx; i <= last_idx; i++) {
+		if (!image->sec[i].data)
+			break;
+		ret = iwl_pcie_load_section(trans, i, &image->sec[i]);
+		if (ret)
+			return ret;
+	}
+
+	if (trans->cfg->device_family == IWL_DEVICE_FAMILY_8000)
+		iwl_set_bits_prph(trans,
+				  CSR_UCODE_LOAD_STATUS_ADDR,
+				  (LMPM_CPU_UCODE_LOADING_COMPLETED |
+				   LMPM_CPU_HDRS_LOADING_COMPLETED |
+				   LMPM_CPU_UCODE_LOADING_STARTED) <<
+					shift_param);
+
 	return 0;
 }
 
 static int iwl_pcie_load_given_ucode(struct iwl_trans *trans,
 				const struct fw_img *image)
 {
-	int i, ret = 0;
+	int ret = 0;
 
 	IWL_DEBUG_FW(trans,
 		     "working with %s image\n",
@@ -524,54 +533,46 @@ static int iwl_pcie_load_given_ucode(struct iwl_trans *trans,
 	/* configure the ucode to be ready to get the secured image */
 	if (image->is_secure) {
 		/* set secure boot inspector addresses */
-		iwl_write32(trans, CSR_SECURE_INSPECTOR_CODE_ADDR, 0);
-		iwl_write32(trans, CSR_SECURE_INSPECTOR_DATA_ADDR, 0);
+		iwl_write_prph(trans,
+			       LMPM_SECURE_INSPECTOR_CODE_ADDR,
+			       LMPM_SECURE_INSPECTOR_CODE_MEM_SPACE);
 
-		/* release CPU1 reset if secure inspector image burned in OTP */
-		iwl_write32(trans, CSR_RESET, 0);
-	}
+		iwl_write_prph(trans,
+			       LMPM_SECURE_INSPECTOR_DATA_ADDR,
+			       LMPM_SECURE_INSPECTOR_DATA_MEM_SPACE);
 
-	/* load to FW the binary sections of CPU1 */
-	IWL_DEBUG_INFO(trans, "Loading CPU1\n");
-	for (i = 0;
-	     i < IWL_UCODE_FIRST_SECTION_OF_SECOND_CPU;
-	     i++) {
-		if (!image->sec[i].data)
-			break;
-		ret = iwl_pcie_load_section(trans, i, &image->sec[i]);
+		/* set CPU1 header address */
+		iwl_write_prph(trans,
+			       LMPM_SECURE_UCODE_LOAD_CPU1_HDR_ADDR,
+			       LMPM_SECURE_CPU1_HDR_MEM_SPACE);
+
+		/* load to FW the binary Secured sections of CPU1 */
+		ret = iwl_pcie_load_cpu_secured_sections(trans, image, 1);
 		if (ret)
 			return ret;
-	}
 
-	/* configure the ucode to start secure process on CPU1 */
-	if (image->is_secure) {
-		/* config CPU1 to start secure protocol */
-		ret = iwl_pcie_secure_set(trans, 1);
+	} else {
+		/* load to FW the binary Non secured sections of CPU1 */
+		ret = iwl_pcie_load_cpu_sections(trans, image, 1);
 		if (ret)
 			return ret;
-	} else {
-		/* Remove all resets to allow NIC to operate */
-		iwl_write32(trans, CSR_RESET, 0);
 	}
 
 	if (image->is_dual_cpus) {
-		/* load to FW the binary sections of CPU2 */
-		IWL_DEBUG_INFO(trans, "working w/ DUAL CPUs - Loading CPU2\n");
-		for (i = IWL_UCODE_FIRST_SECTION_OF_SECOND_CPU;
-			i < IWL_UCODE_SECTION_MAX; i++) {
-			if (!image->sec[i].data)
-				break;
-			ret = iwl_pcie_load_section(trans, i, &image->sec[i]);
-			if (ret)
-				return ret;
-		}
+		/* set CPU2 header address */
+		iwl_write_prph(trans,
+			       LMPM_SECURE_UCODE_LOAD_CPU2_HDR_ADDR,
+			       LMPM_SECURE_CPU2_HDR_MEM_SPACE);
 
-		if (image->is_secure) {
-			/* set CPU2 for secure protocol */
-			ret = iwl_pcie_secure_set(trans, 2);
-			if (ret)
-				return ret;
-		}
+		/* load to FW the binary sections of CPU2 */
+		if (image->is_secure)
+			ret = iwl_pcie_load_cpu_secured_sections(trans,
+								 image,
+								 2);
+		else
+			ret = iwl_pcie_load_cpu_sections(trans, image, 2);
+		if (ret)
+			return ret;
 	}
 
 	/* release CPU reset */
@@ -580,6 +581,20 @@ static int iwl_pcie_load_given_ucode(struct iwl_trans *trans,
 	else
 		iwl_write32(trans, CSR_RESET, 0);
 
+	if (image->is_secure) {
+		/* wait for image verification to complete  */
+		ret = iwl_poll_prph_bit(trans,
+					LMPM_SECURE_BOOT_CPU1_STATUS_ADDR,
+					LMPM_SECURE_BOOT_STATUS_SUCCESS,
+					LMPM_SECURE_BOOT_STATUS_SUCCESS,
+					LMPM_SECURE_TIME_OUT);
+
+		if (ret < 0) {
+			IWL_ERR(trans, "Time out on secure boot process\n");
+			return ret;
+		}
+	}
+
 	return 0;
 }
 
-- 
cgit v1.2.2


From 56c2477f23c3bb3aa33516301b3eab0efe05bbe1 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Tue, 21 Jan 2014 21:19:18 +0100
Subject: iwlwifi: pcie: make FH debugfs file code easier to understand

The code seems fine, as buf won't be assigned when an error
is returned, but checking for the error first is easier to
understand.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/pcie/trans.c | 17 ++++++++---------
 1 file changed, 8 insertions(+), 9 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c
index 7290f422be65..61ae1af34f17 100644
--- a/drivers/net/wireless/iwlwifi/pcie/trans.c
+++ b/drivers/net/wireless/iwlwifi/pcie/trans.c
@@ -1434,16 +1434,15 @@ static ssize_t iwl_dbgfs_fh_reg_read(struct file *file,
 {
 	struct iwl_trans *trans = file->private_data;
 	char *buf = NULL;
-	int pos = 0;
-	ssize_t ret = -EFAULT;
-
-	ret = pos = iwl_dump_fh(trans, &buf);
-	if (buf) {
-		ret = simple_read_from_buffer(user_buf,
-					      count, ppos, buf, pos);
-		kfree(buf);
-	}
+	ssize_t ret;
 
+	ret = iwl_dump_fh(trans, &buf);
+	if (ret < 0)
+		return ret;
+	if (!buf)
+		return -EINVAL;
+	ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret);
+	kfree(buf);
 	return ret;
 }
 
-- 
cgit v1.2.2


From ceaecec8b7896c0b0f9384ecc925828cf6bf31e5 Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Mon, 30 Dec 2013 08:17:02 +0200
Subject: iwlwifi: 7000: warn about old firmware

iwlwifi-7260-8.ucode has been release. Warn if it is not
on the file system.
iwlwifi-7260-7.ucode is still supported for another kernel
version.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-7000.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-7000.c b/drivers/net/wireless/iwlwifi/iwl-7000.c
index 1270f0c2f366..a43e4d1c5f6a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-7000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-7000.c
@@ -71,8 +71,8 @@
 #define IWL3160_UCODE_API_MAX	8
 
 /* Oldest version we won't warn about */
-#define IWL7260_UCODE_API_OK	7
-#define IWL3160_UCODE_API_OK	7
+#define IWL7260_UCODE_API_OK	8
+#define IWL3160_UCODE_API_OK	8
 
 /* Lowest firmware API version supported */
 #define IWL7260_UCODE_API_MIN	7
-- 
cgit v1.2.2


From 33b2f6845b0c86ade2146ec9f259b857ecebeffc Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Tue, 14 Jan 2014 13:48:22 +0200
Subject: iwlwifi: remove obsolete TODO

The calib_version is 255 and this is perfectly fine - no
need to leave a TODO there.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-nvm-parse.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
index f06f4cbe1317..42780971aa04 100644
--- a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
+++ b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
@@ -397,11 +397,7 @@ iwl_parse_nvm_data(struct device *dev, const struct iwl_cfg *cfg,
 	iwl_init_sbands(dev, cfg, data, nvm_sw, sku & NVM_SKU_CAP_11AC_ENABLE,
 			tx_chains, rx_chains);
 
-	data->calib_version = 255;   /* TODO:
-					this value will prevent some checks from
-					failing, we need to check if this
-					field is still needed, and if it does,
-					where is it in the NVM*/
+	data->calib_version = 255;
 
 	return data;
 }
-- 
cgit v1.2.2


From f327b04c4240cc6dbce698bea8f8e14db7fc3a8a Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Tue, 14 Jan 2014 08:30:32 +0200
Subject: iwlwifi: mvm: provide helper to fetch the iwl_mvm_sta from sta_id

We somtimes need to fetch the iwl_mvm_sta structure from a
station index - provide a helper to do that.

Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/bt-coex.c | 14 ++------------
 drivers/net/wireless/iwlwifi/mvm/debugfs.c | 11 +++++------
 drivers/net/wireless/iwlwifi/mvm/mvm.h     | 18 ++++++++++++++++++
 3 files changed, 25 insertions(+), 18 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/bt-coex.c b/drivers/net/wireless/iwlwifi/mvm/bt-coex.c
index 76cde6ce6551..b1a572e52f46 100644
--- a/drivers/net/wireless/iwlwifi/mvm/bt-coex.c
+++ b/drivers/net/wireless/iwlwifi/mvm/bt-coex.c
@@ -500,23 +500,13 @@ static int iwl_mvm_bt_coex_reduced_txp(struct iwl_mvm *mvm, u8 sta_id,
 		.dataflags = { IWL_HCMD_DFL_DUP, },
 		.flags = CMD_ASYNC,
 	};
-
-	struct ieee80211_sta *sta;
 	struct iwl_mvm_sta *mvmsta;
 	int ret;
 
-	if (sta_id == IWL_MVM_STATION_COUNT)
-		return 0;
-
-	sta = rcu_dereference_protected(mvm->fw_id_to_mac_id[sta_id],
-					lockdep_is_held(&mvm->mutex));
-
-	/* This can happen if the station has been removed right now */
-	if (IS_ERR_OR_NULL(sta))
+	mvmsta = iwl_mvm_sta_from_staid_protected(mvm, sta_id);
+	if (!mvmsta)
 		return 0;
 
-	mvmsta = iwl_mvm_sta_from_mac80211(sta);
-
 	/* nothing to do */
 	if (mvmsta->bt_reduced_txpower == enable)
 		return 0;
diff --git a/drivers/net/wireless/iwlwifi/mvm/debugfs.c b/drivers/net/wireless/iwlwifi/mvm/debugfs.c
index 369d4c90e669..8d3bf25f00d6 100644
--- a/drivers/net/wireless/iwlwifi/mvm/debugfs.c
+++ b/drivers/net/wireless/iwlwifi/mvm/debugfs.c
@@ -90,7 +90,7 @@ static ssize_t iwl_dbgfs_tx_flush_write(struct iwl_mvm *mvm, char *buf,
 static ssize_t iwl_dbgfs_sta_drain_write(struct iwl_mvm *mvm, char *buf,
 					 size_t count, loff_t *ppos)
 {
-	struct ieee80211_sta *sta;
+	struct iwl_mvm_sta *mvmsta;
 	int sta_id, drain, ret;
 
 	if (!mvm->ucode_loaded || mvm->cur_ucode != IWL_UCODE_REGULAR)
@@ -105,13 +105,12 @@ static ssize_t iwl_dbgfs_sta_drain_write(struct iwl_mvm *mvm, char *buf,
 
 	mutex_lock(&mvm->mutex);
 
-	sta = rcu_dereference_protected(mvm->fw_id_to_mac_id[sta_id],
-					lockdep_is_held(&mvm->mutex));
-	if (IS_ERR_OR_NULL(sta))
+	mvmsta = iwl_mvm_sta_from_staid_protected(mvm, sta_id);
+
+	if (!mvmsta)
 		ret = -ENOENT;
 	else
-		ret = iwl_mvm_drain_sta(mvm, (void *)sta->drv_priv, drain) ? :
-			count;
+		ret = iwl_mvm_drain_sta(mvm, mvmsta, drain) ? : count;
 
 	mutex_unlock(&mvm->mutex);
 
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index bf13c462a1f4..02e4bdc80de2 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -595,6 +595,24 @@ static inline bool iwl_mvm_is_radio_killed(struct iwl_mvm *mvm)
 	       test_bit(IWL_MVM_STATUS_HW_CTKILL, &mvm->status);
 }
 
+static inline struct iwl_mvm_sta *
+iwl_mvm_sta_from_staid_protected(struct iwl_mvm *mvm, u8 sta_id)
+{
+	struct ieee80211_sta *sta;
+
+	if (sta_id >= ARRAY_SIZE(mvm->fw_id_to_mac_id))
+		return NULL;
+
+	sta = rcu_dereference_protected(mvm->fw_id_to_mac_id[sta_id],
+					lockdep_is_held(&mvm->mutex));
+
+	/* This can happen if the station has been removed right now */
+	if (IS_ERR_OR_NULL(sta))
+		return NULL;
+
+	return iwl_mvm_sta_from_mac80211(sta);
+}
+
 extern const u8 iwl_mvm_ac_to_tx_fifo[];
 
 struct iwl_rate_info {
-- 
cgit v1.2.2


From c4d83271f47f71c9d46793cd224a2223fc36f526 Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Tue, 14 Jan 2014 08:45:26 +0200
Subject: iwlwifi: mvm: check ARRAY_SIZE(mvm->fw_id_to_mac_id) =
 IWL_MVM_STATION_COUNT

Since we use IWL_MVM_STATION_COUNT all over the driver, we
need to make sure that it is the right constant to look at.

Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/ops.c | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c
index f38ed9fb356a..5e4d56ed88a4 100644
--- a/drivers/net/wireless/iwlwifi/mvm/ops.c
+++ b/drivers/net/wireless/iwlwifi/mvm/ops.c
@@ -338,6 +338,13 @@ iwl_op_mode_mvm_start(struct iwl_trans *trans, const struct iwl_cfg *cfg,
 	};
 	int err, scan_size;
 
+	/*
+	 * We use IWL_MVM_STATION_COUNT to check the validity of the station
+	 * index all over the driver - check that its value corresponds to the
+	 * array size.
+	 */
+	BUILD_BUG_ON(ARRAY_SIZE(mvm->fw_id_to_mac_id) != IWL_MVM_STATION_COUNT);
+
 	/********************************
 	 * 1. Allocating and configuring HW data
 	 ********************************/
-- 
cgit v1.2.2


From 46e81af97281fead13612f501798c942dd781e5b Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Tue, 14 Jan 2014 10:33:54 +0200
Subject: iwlwifi: pcie: fix unused variable gcc warning

In iwl_pcie_int_cause_non_ict, trans_pcie is used for lockdep
purposes only. Since this might not be enabled, trans_pcie
finds itself without user leading to a complaint from gcc.
Avoid using trans_pcie by inlining IWL_TRANS_GET_PCIE_TRANS.

Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/pcie/rx.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/pcie/rx.c b/drivers/net/wireless/iwlwifi/pcie/rx.c
index 08c23d497a02..41f684deff97 100644
--- a/drivers/net/wireless/iwlwifi/pcie/rx.c
+++ b/drivers/net/wireless/iwlwifi/pcie/rx.c
@@ -802,10 +802,9 @@ static void iwl_pcie_irq_handle_error(struct iwl_trans *trans)
 
 static u32 iwl_pcie_int_cause_non_ict(struct iwl_trans *trans)
 {
-	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 	u32 inta;
 
-	lockdep_assert_held(&trans_pcie->irq_lock);
+	lockdep_assert_held(&IWL_TRANS_GET_PCIE_TRANS(trans)->irq_lock);
 
 	trace_iwlwifi_dev_irq(trans->dev);
 
-- 
cgit v1.2.2


From df8fe3aed04a158ea657724209081c8322f8eac1 Mon Sep 17 00:00:00 2001
From: David Spinadel <david.spinadel@intel.com>
Date: Sun, 10 Nov 2013 15:42:08 +0200
Subject: iwlwifi: mvm: don't stop sched scan in restart

Don't stop scheduled scan before reporting HW restart;
mac80211 was changed to reschedule it after reconfigure.

Signed-off-by: David Spinadel <david.spinadel@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/ops.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c
index 5e4d56ed88a4..734b022d339a 100644
--- a/drivers/net/wireless/iwlwifi/mvm/ops.c
+++ b/drivers/net/wireless/iwlwifi/mvm/ops.c
@@ -760,7 +760,7 @@ static void iwl_mvm_nic_restart(struct iwl_mvm *mvm)
 			ieee80211_scan_completed(mvm->hw, true);
 			break;
 		case IWL_MVM_SCAN_SCHED:
-			ieee80211_sched_scan_stopped(mvm->hw);
+			/* Sched scan will be restarted by mac80211. */
 			break;
 		}
 
-- 
cgit v1.2.2


From 992f81fcd97e87e7ebbb26e544430adf483203f0 Mon Sep 17 00:00:00 2001
From: David Spinadel <david.spinadel@intel.com>
Date: Thu, 9 Jan 2014 14:22:55 +0200
Subject: iwlwifi: mvm: notify scan completed even if no fw_restart

Notify scan completed if fw_restart flow isn't going to be run.
Otherwise, the scan will stay stack forever and mac80211 will
not be able to remove the interface.

Signed-off-by: David Spinadel <david.spinadel@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/ops.c  | 43 ++++++++++++++++++---------------
 drivers/net/wireless/iwlwifi/mvm/scan.c |  2 +-
 2 files changed, 24 insertions(+), 21 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c
index 734b022d339a..fdadfe95d314 100644
--- a/drivers/net/wireless/iwlwifi/mvm/ops.c
+++ b/drivers/net/wireless/iwlwifi/mvm/ops.c
@@ -713,6 +713,29 @@ static void iwl_mvm_nic_restart(struct iwl_mvm *mvm)
 {
 	iwl_abort_notification_waits(&mvm->notif_wait);
 
+	/*
+	 * This is a bit racy, but worst case we tell mac80211 about
+	 * a stopped/aborted scan when that was already done which
+	 * is not a problem. It is necessary to abort any os scan
+	 * here because mac80211 requires having the scan cleared
+	 * before restarting.
+	 * We'll reset the scan_status to NONE in restart cleanup in
+	 * the next start() call from mac80211. If restart isn't called
+	 * (no fw restart) scan status will stay busy.
+	 */
+	switch (mvm->scan_status) {
+	case IWL_MVM_SCAN_NONE:
+		break;
+	case IWL_MVM_SCAN_OS:
+		ieee80211_scan_completed(mvm->hw, true);
+		break;
+	case IWL_MVM_SCAN_SCHED:
+		/* Sched scan will be restarted by mac80211 in restart_hw. */
+		if (!mvm->restart_fw)
+			ieee80211_sched_scan_stopped(mvm->hw);
+		break;
+	}
+
 	/*
 	 * If we're restarting already, don't cycle restarts.
 	 * If INIT fw asserted, it will likely fail again.
@@ -744,26 +767,6 @@ static void iwl_mvm_nic_restart(struct iwl_mvm *mvm)
 		INIT_WORK(&reprobe->work, iwl_mvm_reprobe_wk);
 		schedule_work(&reprobe->work);
 	} else if (mvm->cur_ucode == IWL_UCODE_REGULAR && mvm->restart_fw) {
-		/*
-		 * This is a bit racy, but worst case we tell mac80211 about
-		 * a stopped/aborted (sched) scan when that was already done
-		 * which is not a problem. It is necessary to abort any scan
-		 * here because mac80211 requires having the scan cleared
-		 * before restarting.
-		 * We'll reset the scan_status to NONE in restart cleanup in
-		 * the next start() call from mac80211.
-		 */
-		switch (mvm->scan_status) {
-		case IWL_MVM_SCAN_NONE:
-			break;
-		case IWL_MVM_SCAN_OS:
-			ieee80211_scan_completed(mvm->hw, true);
-			break;
-		case IWL_MVM_SCAN_SCHED:
-			/* Sched scan will be restarted by mac80211. */
-			break;
-		}
-
 		if (mvm->restart_fw > 0)
 			mvm->restart_fw--;
 		ieee80211_restart_hw(mvm->hw);
diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c
index 0e0007960612..6c5c17397f7e 100644
--- a/drivers/net/wireless/iwlwifi/mvm/scan.c
+++ b/drivers/net/wireless/iwlwifi/mvm/scan.c
@@ -487,7 +487,7 @@ void iwl_mvm_cancel_scan(struct iwl_mvm *mvm)
 	ret = iwl_mvm_send_cmd_pdu(mvm, SCAN_ABORT_CMD, CMD_SYNC, 0, NULL);
 	if (ret) {
 		IWL_ERR(mvm, "Couldn't send SCAN_ABORT_CMD: %d\n", ret);
-		/* mac80211's state will be cleaned in the fw_restart flow */
+		/* mac80211's state will be cleaned in the nic_restart flow */
 		goto out_remove_notif;
 	}
 
-- 
cgit v1.2.2


From a21d7bcbf4c65bb7f79e16287d41040e4c7f5596 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Tue, 12 Nov 2013 17:30:52 +0100
Subject: iwlwifi: mvm: add low-latency framework

For various traffic use cases, we want to be able to treat multi-
channel scenarios differently. Introduce a low-latency framework
that currently only has a debugfs file to enable low-latency mode,
but can later be extended.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c | 38 ++++++++++++++++++++++++++
 drivers/net/wireless/iwlwifi/mvm/mvm.h         | 25 ++++++++++++++++-
 drivers/net/wireless/iwlwifi/mvm/utils.c       | 12 ++++++++
 3 files changed, 74 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c b/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c
index 0e29cd83a06a..19ecade5ec5f 100644
--- a/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c
+++ b/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c
@@ -460,6 +460,41 @@ static ssize_t iwl_dbgfs_bf_params_read(struct file *file,
 	return simple_read_from_buffer(user_buf, count, ppos, buf, pos);
 }
 
+static ssize_t iwl_dbgfs_low_latency_write(struct ieee80211_vif *vif, char *buf,
+					   size_t count, loff_t *ppos)
+{
+	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
+	struct iwl_mvm *mvm = mvmvif->mvm;
+	u8 value;
+	int ret;
+
+	ret = kstrtou8(buf, 0, &value);
+	if (ret)
+		return ret;
+	if (value > 1)
+		return -EINVAL;
+
+	mutex_lock(&mvm->mutex);
+	iwl_mvm_update_low_latency(mvm, vif, value);
+	mutex_unlock(&mvm->mutex);
+
+	return count;
+}
+
+static ssize_t iwl_dbgfs_low_latency_read(struct file *file,
+					  char __user *user_buf,
+					  size_t count, loff_t *ppos)
+{
+	struct ieee80211_vif *vif = file->private_data;
+	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
+	char buf[3];
+
+	buf[0] = mvmvif->low_latency ? '1' : '0';
+	buf[1] = '\n';
+	buf[2] = '\0';
+	return simple_read_from_buffer(user_buf, count, ppos, buf, sizeof(buf));
+}
+
 #define MVM_DEBUGFS_WRITE_FILE_OPS(name, bufsz) \
 	_MVM_DEBUGFS_WRITE_FILE_OPS(name, bufsz, struct ieee80211_vif)
 #define MVM_DEBUGFS_READ_WRITE_FILE_OPS(name, bufsz) \
@@ -473,6 +508,7 @@ static ssize_t iwl_dbgfs_bf_params_read(struct file *file,
 MVM_DEBUGFS_READ_FILE_OPS(mac_params);
 MVM_DEBUGFS_READ_WRITE_FILE_OPS(pm_params, 32);
 MVM_DEBUGFS_READ_WRITE_FILE_OPS(bf_params, 256);
+MVM_DEBUGFS_READ_WRITE_FILE_OPS(low_latency, 10);
 
 void iwl_mvm_vif_dbgfs_register(struct iwl_mvm *mvm, struct ieee80211_vif *vif)
 {
@@ -505,6 +541,8 @@ void iwl_mvm_vif_dbgfs_register(struct iwl_mvm *mvm, struct ieee80211_vif *vif)
 
 	MVM_DEBUGFS_ADD_FILE_VIF(mac_params, mvmvif->dbgfs_dir,
 				 S_IRUSR);
+	MVM_DEBUGFS_ADD_FILE_VIF(low_latency, mvmvif->dbgfs_dir,
+				 S_IRUSR | S_IWUSR);
 
 	if (vif->type == NL80211_IFTYPE_STATION && !vif->p2p &&
 	    mvmvif == mvm->bf_allowed_vif)
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index 02e4bdc80de2..00bc4ce06cca 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -269,7 +269,9 @@ struct iwl_mvm_vif_bf_data {
  * @ap_ibss_active: indicates that AP/IBSS is configured and that the interface
  *	should get quota etc.
  * @monitor_active: indicates that monitor context is configured, and that the
- * interface should get quota etc.
+ *	interface should get quota etc.
+ * @low_latency: indicates that this interface is in low-latency mode
+ *	(VMACLowLatencyMode)
  * @queue_params: QoS params for this MAC
  * @bcast_sta: station used for broadcast packets. Used by the following
  *  vifs: P2P_DEVICE, GO and AP.
@@ -285,6 +287,7 @@ struct iwl_mvm_vif {
 	bool uploaded;
 	bool ap_ibss_active;
 	bool monitor_active;
+	bool low_latency;
 	struct iwl_mvm_vif_bf_data bf_data;
 
 	u32 ap_beacon_time;
@@ -909,6 +912,26 @@ void iwl_mvm_update_smps(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
 				enum iwl_mvm_smps_type_request req_type,
 				enum ieee80211_smps_mode smps_request);
 
+/* Low latency */
+int iwl_mvm_update_low_latency(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
+			       bool value);
+/* get VMACLowLatencyMode */
+static inline bool iwl_mvm_vif_low_latency(struct iwl_mvm_vif *mvmvif)
+{
+	/*
+	 * should this consider associated/active/... state?
+	 *
+	 * Normally low-latency should only be active on interfaces
+	 * that are active, but at least with debugfs it can also be
+	 * enabled on interfaces that aren't active. However, when
+	 * interface aren't active then they aren't added into the
+	 * binding, so this has no real impact. For now, just return
+	 * the current desired low-latency state.
+	 */
+
+	return mvmvif->low_latency;
+}
+
 /* Thermal management and CT-kill */
 void iwl_mvm_tt_handler(struct iwl_mvm *mvm);
 void iwl_mvm_tt_initialize(struct iwl_mvm *mvm);
diff --git a/drivers/net/wireless/iwlwifi/mvm/utils.c b/drivers/net/wireless/iwlwifi/mvm/utils.c
index a4a5e25623c3..e2cc876d9388 100644
--- a/drivers/net/wireless/iwlwifi/mvm/utils.c
+++ b/drivers/net/wireless/iwlwifi/mvm/utils.c
@@ -536,3 +536,15 @@ void iwl_mvm_update_smps(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
 
 	ieee80211_request_smps(vif, smps_mode);
 }
+
+int iwl_mvm_update_low_latency(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
+			       bool value)
+{
+	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
+
+	lockdep_assert_held(&mvm->mutex);
+
+	mvmvif->low_latency = value;
+
+	return iwl_mvm_update_quotas(mvm, NULL);
+}
-- 
cgit v1.2.2


From e03f9bef2f9de4295df91a235c6b521dd64ef655 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Wed, 13 Nov 2013 17:16:19 +0100
Subject: iwlwifi: mvm: disable powersave in low-latency

While an interface is in low-latency mode, for now powersave
should be disabled for it, so take low-latency into account
in the powersave code and force powersave recalculation when
low-latency mode changes.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/power.c | 3 ++-
 drivers/net/wireless/iwlwifi/mvm/utils.c | 6 +++++-
 2 files changed, 7 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/power.c b/drivers/net/wireless/iwlwifi/mvm/power.c
index d9eab3b7bb9f..436c7e0ae6b1 100644
--- a/drivers/net/wireless/iwlwifi/mvm/power.c
+++ b/drivers/net/wireless/iwlwifi/mvm/power.c
@@ -312,7 +312,8 @@ static void iwl_mvm_power_build_cmd(struct iwl_mvm *mvm,
 	    mvmvif->dbgfs_pm.disable_power_off)
 		cmd->flags &= cpu_to_le16(~POWER_FLAGS_POWER_SAVE_ENA_MSK);
 #endif
-	if (!vif->bss_conf.ps || mvmvif->pm_prevented)
+	if (!vif->bss_conf.ps || mvmvif->pm_prevented ||
+	    iwl_mvm_vif_low_latency(mvmvif))
 		return;
 
 	cmd->flags |= cpu_to_le16(POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK);
diff --git a/drivers/net/wireless/iwlwifi/mvm/utils.c b/drivers/net/wireless/iwlwifi/mvm/utils.c
index e2cc876d9388..790da1bea25e 100644
--- a/drivers/net/wireless/iwlwifi/mvm/utils.c
+++ b/drivers/net/wireless/iwlwifi/mvm/utils.c
@@ -541,10 +541,14 @@ int iwl_mvm_update_low_latency(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
 			       bool value)
 {
 	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
+	int res;
 
 	lockdep_assert_held(&mvm->mutex);
 
 	mvmvif->low_latency = value;
 
-	return iwl_mvm_update_quotas(mvm, NULL);
+	res = iwl_mvm_update_quotas(mvm, NULL);
+	if (res)
+		return res;
+	return iwl_mvm_power_update_mode(mvm, vif);
 }
-- 
cgit v1.2.2


From 6ca40d6eae3e36068157412ceb9ddf1f2d53d1c8 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Wed, 18 Dec 2013 15:56:28 +0100
Subject: iwlwifi: mvm: reserve bandwidth for low-latency interface

If there is/are interface(s) in low-latency mode, reserve a
percentage (currently 64%) of the quota for that binding to
improve the quality of service for those interfaces. However,
if there's more than one binding that has low-latency, then
give up and don't reserve, we can't allocate more than 100%.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/constants.h |  1 +
 drivers/net/wireless/iwlwifi/mvm/quota.c     | 63 +++++++++++++++++++++-------
 2 files changed, 50 insertions(+), 14 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/constants.h b/drivers/net/wireless/iwlwifi/mvm/constants.h
index 036857698565..ffa3346a9b06 100644
--- a/drivers/net/wireless/iwlwifi/mvm/constants.h
+++ b/drivers/net/wireless/iwlwifi/mvm/constants.h
@@ -78,5 +78,6 @@
 #define IWL_MVM_PS_SNOOZE_INTERVAL		25
 #define IWL_MVM_PS_SNOOZE_WINDOW		50
 #define IWL_MVM_WOWLAN_PS_SNOOZE_WINDOW		25
+#define IWL_MVM_LOWLAT_QUOTA_MIN_PERCENT	64
 
 #endif /* __MVM_CONSTANTS_H */
diff --git a/drivers/net/wireless/iwlwifi/mvm/quota.c b/drivers/net/wireless/iwlwifi/mvm/quota.c
index ce5db6c4ef7e..0d2185b89d95 100644
--- a/drivers/net/wireless/iwlwifi/mvm/quota.c
+++ b/drivers/net/wireless/iwlwifi/mvm/quota.c
@@ -65,9 +65,14 @@
 #include "fw-api.h"
 #include "mvm.h"
 
+#define QUOTA_100	IWL_MVM_MAX_QUOTA
+#define QUOTA_LOWLAT_MIN ((QUOTA_100 * IWL_MVM_LOWLAT_QUOTA_MIN_PERCENT) / 100)
+
 struct iwl_mvm_quota_iterator_data {
 	int n_interfaces[MAX_BINDINGS];
 	int colors[MAX_BINDINGS];
+	int low_latency[MAX_BINDINGS];
+	int n_low_latency_bindings;
 	struct ieee80211_vif *new_vif;
 };
 
@@ -107,22 +112,29 @@ static void iwl_mvm_quota_iterator(void *_data, u8 *mac,
 	switch (vif->type) {
 	case NL80211_IFTYPE_STATION:
 		if (vif->bss_conf.assoc)
-			data->n_interfaces[id]++;
-		break;
+			break;
+		return;
 	case NL80211_IFTYPE_AP:
 	case NL80211_IFTYPE_ADHOC:
 		if (mvmvif->ap_ibss_active)
-			data->n_interfaces[id]++;
-		break;
+			break;
+		return;
 	case NL80211_IFTYPE_MONITOR:
 		if (mvmvif->monitor_active)
-			data->n_interfaces[id]++;
-		break;
+			break;
+		return;
 	case NL80211_IFTYPE_P2P_DEVICE:
-		break;
+		return;
 	default:
 		WARN_ON_ONCE(1);
-		break;
+		return;
+	}
+
+	data->n_interfaces[id]++;
+
+	if (iwl_mvm_vif_low_latency(mvmvif) && !data->low_latency[id]) {
+		data->n_low_latency_bindings++;
+		data->low_latency[id] = true;
 	}
 }
 
@@ -162,7 +174,7 @@ static void iwl_mvm_adjust_quota_for_noa(struct iwl_mvm *mvm,
 int iwl_mvm_update_quotas(struct iwl_mvm *mvm, struct ieee80211_vif *newvif)
 {
 	struct iwl_time_quota_cmd cmd = {};
-	int i, idx, ret, num_active_macs, quota, quota_rem;
+	int i, idx, ret, num_active_macs, quota, quota_rem, n_non_lowlat;
 	struct iwl_mvm_quota_iterator_data data = {
 		.n_interfaces = {},
 		.colors = { -1, -1, -1, -1 },
@@ -197,11 +209,30 @@ int iwl_mvm_update_quotas(struct iwl_mvm *mvm, struct ieee80211_vif *newvif)
 		num_active_macs += data.n_interfaces[i];
 	}
 
-	quota = 0;
-	quota_rem = 0;
-	if (num_active_macs) {
-		quota = IWL_MVM_MAX_QUOTA / num_active_macs;
-		quota_rem = IWL_MVM_MAX_QUOTA % num_active_macs;
+	n_non_lowlat = num_active_macs;
+
+	if (data.n_low_latency_bindings == 1) {
+		for (i = 0; i < MAX_BINDINGS; i++) {
+			if (data.low_latency[i]) {
+				n_non_lowlat -= data.n_interfaces[i];
+				break;
+			}
+		}
+		if (n_non_lowlat) {
+			quota = (QUOTA_100 - QUOTA_LOWLAT_MIN) / n_non_lowlat;
+			quota_rem = QUOTA_100 - n_non_lowlat * quota -
+				    QUOTA_LOWLAT_MIN;
+		} else {
+			quota = QUOTA_100;
+			quota_rem = 0;
+		}
+	} else if (num_active_macs) {
+		quota = QUOTA_100 / num_active_macs;
+		quota_rem = QUOTA_100 % num_active_macs;
+	} else {
+		/* values don't really matter - won't be used */
+		quota = 0;
+		quota_rem = 0;
 	}
 
 	for (idx = 0, i = 0; i < MAX_BINDINGS; i++) {
@@ -214,6 +245,10 @@ int iwl_mvm_update_quotas(struct iwl_mvm *mvm, struct ieee80211_vif *newvif)
 		if (data.n_interfaces[i] <= 0) {
 			cmd.quotas[idx].quota = cpu_to_le32(0);
 			cmd.quotas[idx].max_duration = cpu_to_le32(0);
+		} else if (data.n_low_latency_bindings == 1 && n_non_lowlat &&
+			   data.low_latency[i]) {
+			cmd.quotas[idx].quota = cpu_to_le32(QUOTA_LOWLAT_MIN);
+			cmd.quotas[idx].max_duration = cpu_to_le32(0);
 		} else {
 			cmd.quotas[idx].quota =
 				cpu_to_le32(quota * data.n_interfaces[i]);
-- 
cgit v1.2.2


From 1fb184b4a43d2ef303361efa5a166a60e4b4374a Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Tue, 12 Nov 2013 22:18:45 +0100
Subject: iwlwifi: mvm: limit non-low-latency binding scheduling duration

Limit the scheduling duration of bindings without a low-latency
interface in the firmware, this prevents those bindings from
occupying the medium for a period of time longer than what we
want for the other interfaces in low-latency mode.

As older firmware doesn't do anything with the max_duration field
and ignores it completely, there's no need for a firmware flag.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/constants.h |  2 ++
 drivers/net/wireless/iwlwifi/mvm/quota.c     | 33 ++++++++++++++++++++++------
 2 files changed, 28 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/constants.h b/drivers/net/wireless/iwlwifi/mvm/constants.h
index ffa3346a9b06..f3b96e44e690 100644
--- a/drivers/net/wireless/iwlwifi/mvm/constants.h
+++ b/drivers/net/wireless/iwlwifi/mvm/constants.h
@@ -79,5 +79,7 @@
 #define IWL_MVM_PS_SNOOZE_WINDOW		50
 #define IWL_MVM_WOWLAN_PS_SNOOZE_WINDOW		25
 #define IWL_MVM_LOWLAT_QUOTA_MIN_PERCENT	64
+#define IWL_MVM_LOWLAT_SINGLE_BINDING_MAXDUR	24 /* TU */
+#define IWL_MVM_LOWLAT_DUAL_BINDING_MAXDUR	24 /* TU */
 
 #endif /* __MVM_CONSTANTS_H */
diff --git a/drivers/net/wireless/iwlwifi/mvm/quota.c b/drivers/net/wireless/iwlwifi/mvm/quota.c
index 0d2185b89d95..5691a8551146 100644
--- a/drivers/net/wireless/iwlwifi/mvm/quota.c
+++ b/drivers/net/wireless/iwlwifi/mvm/quota.c
@@ -180,6 +180,7 @@ int iwl_mvm_update_quotas(struct iwl_mvm *mvm, struct ieee80211_vif *newvif)
 		.colors = { -1, -1, -1, -1 },
 		.new_vif = newvif,
 	};
+	u32 ll_max_duration;
 
 	lockdep_assert_held(&mvm->mutex);
 
@@ -198,6 +199,21 @@ int iwl_mvm_update_quotas(struct iwl_mvm *mvm, struct ieee80211_vif *newvif)
 		iwl_mvm_quota_iterator(&data, newvif->addr, newvif);
 	}
 
+	switch (data.n_low_latency_bindings) {
+	case 0: /* no low latency - use default */
+		ll_max_duration = 0;
+		break;
+	case 1: /* SingleBindingLowLatencyMode */
+		ll_max_duration = IWL_MVM_LOWLAT_SINGLE_BINDING_MAXDUR;
+		break;
+	case 2: /* DualBindingLowLatencyMode */
+		ll_max_duration = IWL_MVM_LOWLAT_DUAL_BINDING_MAXDUR;
+		break;
+	default: /* MultiBindingLowLatencyMode */
+		ll_max_duration = 0;
+		break;
+	}
+
 	/*
 	 * The FW's scheduling session consists of
 	 * IWL_MVM_MAX_QUOTA fragments. Divide these fragments
@@ -242,18 +258,21 @@ int iwl_mvm_update_quotas(struct iwl_mvm *mvm, struct ieee80211_vif *newvif)
 		cmd.quotas[idx].id_and_color =
 			cpu_to_le32(FW_CMD_ID_AND_COLOR(i, data.colors[i]));
 
-		if (data.n_interfaces[i] <= 0) {
+		if (data.n_interfaces[i] <= 0)
 			cmd.quotas[idx].quota = cpu_to_le32(0);
-			cmd.quotas[idx].max_duration = cpu_to_le32(0);
-		} else if (data.n_low_latency_bindings == 1 && n_non_lowlat &&
-			   data.low_latency[i]) {
+		else if (data.n_low_latency_bindings == 1 && n_non_lowlat &&
+			 data.low_latency[i])
 			cmd.quotas[idx].quota = cpu_to_le32(QUOTA_LOWLAT_MIN);
-			cmd.quotas[idx].max_duration = cpu_to_le32(0);
-		} else {
+		else
 			cmd.quotas[idx].quota =
 				cpu_to_le32(quota * data.n_interfaces[i]);
+
+		if (data.n_interfaces[i] && !data.low_latency[i])
+			cmd.quotas[idx].max_duration =
+				cpu_to_le32(ll_max_duration);
+		else
 			cmd.quotas[idx].max_duration = cpu_to_le32(0);
-		}
+
 		idx++;
 	}
 
-- 
cgit v1.2.2


From 0ee5bcdd77e7a7b54e0d79c2582dc22296c462cb Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Wed, 15 Jan 2014 16:57:54 +0200
Subject: iwlwifi: mvm: BT Coex - set low latency vif as primary

If a vif is in low latency mode, it should be in primary
channel.
Also tell BT Coex about the change when a vif enters or
exits low latency mode.

Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/bt-coex.c | 29 ++++++++++++++++++++++++-----
 drivers/net/wireless/iwlwifi/mvm/utils.c   |  3 +++
 2 files changed, 27 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/bt-coex.c b/drivers/net/wireless/iwlwifi/mvm/bt-coex.c
index b1a572e52f46..d38c4aec640e 100644
--- a/drivers/net/wireless/iwlwifi/mvm/bt-coex.c
+++ b/drivers/net/wireless/iwlwifi/mvm/bt-coex.c
@@ -542,6 +542,7 @@ struct iwl_bt_iterator_data {
 	bool reduced_tx_power;
 	struct ieee80211_chanctx_conf *primary;
 	struct ieee80211_chanctx_conf *secondary;
+	bool primary_ll;
 };
 
 static inline
@@ -590,7 +591,14 @@ static void iwl_mvm_bt_notif_iterator(void *_data, u8 *mac,
 		return;
 	}
 
-	/* SoftAP / GO will always be primary */
+	/* low latency is always primary */
+	if (iwl_mvm_vif_low_latency(mvmvif)) {
+		data->primary_ll = true;
+
+		data->secondary = data->primary;
+		data->primary = chanctx_conf;
+	}
+
 	if (vif->type == NL80211_IFTYPE_AP) {
 		if (!mvmvif->ap_ibss_active)
 			return;
@@ -601,9 +609,17 @@ static void iwl_mvm_bt_notif_iterator(void *_data, u8 *mac,
 		if (chanctx_conf == data->primary)
 			return;
 
-		/* downgrade the current primary no matter what its type is */
-		data->secondary = data->primary;
-		data->primary = chanctx_conf;
+		if (!data->primary_ll) {
+			/*
+			 * downgrade the current primary no matter what its
+			 * type is.
+			 */
+			data->secondary = data->primary;
+			data->primary = chanctx_conf;
+		} else {
+			/* there is low latency vif - we will be secondary */
+			data->secondary = chanctx_conf;
+		}
 		return;
 	}
 
@@ -613,7 +629,10 @@ static void iwl_mvm_bt_notif_iterator(void *_data, u8 *mac,
 	if (!vif->bss_conf.assoc)
 		return;
 
-	/* STA / P2P Client, try to be primary if first vif */
+	/*
+	 * STA / P2P Client, try to be primary if first vif. If we are in low
+	 * latency mode, we are already in primary and just don't do much
+	 */
 	if (!data->primary || data->primary == chanctx_conf)
 		data->primary = chanctx_conf;
 	else if (!data->secondary)
diff --git a/drivers/net/wireless/iwlwifi/mvm/utils.c b/drivers/net/wireless/iwlwifi/mvm/utils.c
index 790da1bea25e..c7ee2f3e506b 100644
--- a/drivers/net/wireless/iwlwifi/mvm/utils.c
+++ b/drivers/net/wireless/iwlwifi/mvm/utils.c
@@ -550,5 +550,8 @@ int iwl_mvm_update_low_latency(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
 	res = iwl_mvm_update_quotas(mvm, NULL);
 	if (res)
 		return res;
+
+	iwl_mvm_bt_coex_vif_change(mvm);
+
 	return iwl_mvm_power_update_mode(mvm, vif);
 }
-- 
cgit v1.2.2


From f6415f6bcf8f977b3708672e979f22450c1f5d66 Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Thu, 26 Dec 2013 15:32:40 +0200
Subject: iwlwifi: mvm: BT Coex - change SMPS settings in AP mode

Based on the Bluetooth activity grading, we can stop using
the shared antenna and ask the stations to honor the new
SMPS state.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/bt-coex.c | 85 +++++++++++++++++++-----------
 drivers/net/wireless/iwlwifi/mvm/utils.c   |  7 ++-
 2 files changed, 60 insertions(+), 32 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/bt-coex.c b/drivers/net/wireless/iwlwifi/mvm/bt-coex.c
index d38c4aec640e..ed20f4e7a3fd 100644
--- a/drivers/net/wireless/iwlwifi/mvm/bt-coex.c
+++ b/drivers/net/wireless/iwlwifi/mvm/bt-coex.c
@@ -568,29 +568,74 @@ static void iwl_mvm_bt_notif_iterator(void *_data, u8 *mac,
 	struct iwl_mvm *mvm = data->mvm;
 	struct ieee80211_chanctx_conf *chanctx_conf;
 	enum ieee80211_smps_mode smps_mode;
+	u32 bt_activity_grading;
 	int ave_rssi;
 
 	lockdep_assert_held(&mvm->mutex);
 
-	if (vif->type != NL80211_IFTYPE_STATION &&
-	    vif->type != NL80211_IFTYPE_AP)
-		return;
+	switch (vif->type) {
+	case NL80211_IFTYPE_STATION:
+		/* default smps_mode for BSS / P2P client is AUTOMATIC */
+		smps_mode = IEEE80211_SMPS_AUTOMATIC;
+		data->num_bss_ifaces++;
+
+		/*
+		 * Count unassoc BSSes, relax SMSP constraints
+		 * and disable reduced Tx Power
+		 */
+		if (!vif->bss_conf.assoc) {
+			iwl_mvm_update_smps(mvm, vif, IWL_MVM_SMPS_REQ_BT_COEX,
+					    smps_mode);
+			if (iwl_mvm_bt_coex_reduced_txp(mvm,
+							mvmvif->ap_sta_id,
+							false))
+				IWL_ERR(mvm, "Couldn't send BT_CONFIG cmd\n");
+			return;
+		}
+		break;
+	case NL80211_IFTYPE_AP:
+		/* default smps_mode for AP / GO is OFF */
+		smps_mode = IEEE80211_SMPS_OFF;
+		if (!mvmvif->ap_ibss_active) {
+			iwl_mvm_update_smps(mvm, vif, IWL_MVM_SMPS_REQ_BT_COEX,
+					    smps_mode);
+			return;
+		}
 
-	smps_mode = IEEE80211_SMPS_AUTOMATIC;
+		/* the Ack / Cts kill mask must be default if AP / GO */
+		data->reduced_tx_power = false;
+		break;
+	default:
+		return;
+	}
 
 	chanctx_conf = rcu_dereference(vif->chanctx_conf);
 
 	/* If channel context is invalid or not on 2.4GHz .. */
 	if ((!chanctx_conf ||
 	     chanctx_conf->def.chan->band != IEEE80211_BAND_2GHZ)) {
-		/* ... and it is an associated STATION, relax constraints */
-		if (vif->type == NL80211_IFTYPE_STATION && vif->bss_conf.assoc)
-			iwl_mvm_update_smps(mvm, vif, IWL_MVM_SMPS_REQ_BT_COEX,
-					    smps_mode);
-		iwl_mvm_bt_coex_enable_rssi_event(mvm, vif, false, 0);
+		/* ... relax constraints and disable rssi events */
+		iwl_mvm_update_smps(mvm, vif, IWL_MVM_SMPS_REQ_BT_COEX,
+				    smps_mode);
+		if (vif->type == NL80211_IFTYPE_STATION)
+			iwl_mvm_bt_coex_enable_rssi_event(mvm, vif, false, 0);
 		return;
 	}
 
+	bt_activity_grading = le32_to_cpu(data->notif->bt_activity_grading);
+	if (bt_activity_grading >= BT_HIGH_TRAFFIC)
+		smps_mode = IEEE80211_SMPS_STATIC;
+	else if (bt_activity_grading >= BT_LOW_TRAFFIC)
+		smps_mode = vif->type == NL80211_IFTYPE_AP ?
+				IEEE80211_SMPS_OFF :
+				IEEE80211_SMPS_DYNAMIC;
+	IWL_DEBUG_COEX(data->mvm,
+		       "mac %d: bt_status %d bt_activity_grading %d smps_req %d\n",
+		       mvmvif->id, data->notif->bt_status, bt_activity_grading,
+		       smps_mode);
+
+	iwl_mvm_update_smps(mvm, vif, IWL_MVM_SMPS_REQ_BT_COEX, smps_mode);
+
 	/* low latency is always primary */
 	if (iwl_mvm_vif_low_latency(mvmvif)) {
 		data->primary_ll = true;
@@ -603,9 +648,6 @@ static void iwl_mvm_bt_notif_iterator(void *_data, u8 *mac,
 		if (!mvmvif->ap_ibss_active)
 			return;
 
-		/* the Ack / Cts kill mask must be default if AP / GO */
-		data->reduced_tx_power = false;
-
 		if (chanctx_conf == data->primary)
 			return;
 
@@ -623,12 +665,6 @@ static void iwl_mvm_bt_notif_iterator(void *_data, u8 *mac,
 		return;
 	}
 
-	data->num_bss_ifaces++;
-
-	/* we are now a STA / P2P Client, and take associated ones only */
-	if (!vif->bss_conf.assoc)
-		return;
-
 	/*
 	 * STA / P2P Client, try to be primary if first vif. If we are in low
 	 * latency mode, we are already in primary and just don't do much
@@ -639,19 +675,6 @@ static void iwl_mvm_bt_notif_iterator(void *_data, u8 *mac,
 		/* if secondary is not NULL, it might be a GO */
 		data->secondary = chanctx_conf;
 
-	if (le32_to_cpu(data->notif->bt_activity_grading) >= BT_HIGH_TRAFFIC)
-		smps_mode = IEEE80211_SMPS_STATIC;
-	else if (le32_to_cpu(data->notif->bt_activity_grading) >=
-		 BT_LOW_TRAFFIC)
-		smps_mode = IEEE80211_SMPS_DYNAMIC;
-
-	IWL_DEBUG_COEX(data->mvm,
-		       "mac %d: bt_status %d bt_activity_grading %d smps_req %d\n",
-		       mvmvif->id,  data->notif->bt_status,
-		       data->notif->bt_activity_grading, smps_mode);
-
-	iwl_mvm_update_smps(mvm, vif, IWL_MVM_SMPS_REQ_BT_COEX, smps_mode);
-
 	/* don't reduce the Tx power if in loose scheme */
 	if (iwl_get_coex_type(mvm, vif) == BT_COEX_LOOSE_LUT ||
 	    mvm->cfg->bt_shared_single_ant) {
diff --git a/drivers/net/wireless/iwlwifi/mvm/utils.c b/drivers/net/wireless/iwlwifi/mvm/utils.c
index c7ee2f3e506b..1aadede26919 100644
--- a/drivers/net/wireless/iwlwifi/mvm/utils.c
+++ b/drivers/net/wireless/iwlwifi/mvm/utils.c
@@ -514,7 +514,7 @@ void iwl_mvm_update_smps(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
 			 enum ieee80211_smps_mode smps_request)
 {
 	struct iwl_mvm_vif *mvmvif;
-	enum ieee80211_smps_mode smps_mode = IEEE80211_SMPS_AUTOMATIC;
+	enum ieee80211_smps_mode smps_mode;
 	int i;
 
 	lockdep_assert_held(&mvm->mutex);
@@ -523,6 +523,11 @@ void iwl_mvm_update_smps(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
 	if (num_of_ant(iwl_fw_valid_rx_ant(mvm->fw)) == 1)
 		return;
 
+	if (vif->type == NL80211_IFTYPE_AP)
+		smps_mode = IEEE80211_SMPS_OFF;
+	else
+		smps_mode = IEEE80211_SMPS_AUTOMATIC;
+
 	mvmvif = iwl_mvm_vif_from_mac80211(vif);
 	mvmvif->smps_requests[req_type] = smps_request;
 	for (i = 0; i < NUM_IWL_MVM_SMPS_REQ; i++) {
-- 
cgit v1.2.2


From fc1471f0613b8a31e6905d12e18aab0433375de8 Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Wed, 15 Jan 2014 10:01:29 +0200
Subject: iwlwifi: mvm: change the format of the SRAM dump

As a debug tool, we dump the SRAM from the device when an
error occurs. The main users of this want it in a different
format, so change the format to suit their needs.
Also - add a short delay between the prints to make sure
that the user space logger can catch up.

This happens only when the firmware asserts, and only when
fw_restart is set to 0 which is typically a testing
configuration.

Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/utils.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/utils.c b/drivers/net/wireless/iwlwifi/mvm/utils.c
index 1aadede26919..b2162328ac96 100644
--- a/drivers/net/wireless/iwlwifi/mvm/utils.c
+++ b/drivers/net/wireless/iwlwifi/mvm/utils.c
@@ -457,7 +457,8 @@ void iwl_mvm_dump_sram(struct iwl_mvm *mvm)
 {
 	const struct fw_img *img;
 	int ofs, len = 0;
-	u8 *buf;
+	int i;
+	__le32 *buf;
 
 	if (!mvm->ucode_loaded)
 		return;
@@ -471,7 +472,12 @@ void iwl_mvm_dump_sram(struct iwl_mvm *mvm)
 		return;
 
 	iwl_trans_read_mem_bytes(mvm->trans, ofs, buf, len);
-	iwl_print_hex_error(mvm->trans, buf, len);
+	len = len >> 2;
+	for (i = 0; i < len; i++) {
+		IWL_ERR(mvm, "0x%08X\n", le32_to_cpu(buf[i]));
+		/* Add a small delay to let syslog catch up */
+		udelay(10);
+	}
 
 	kfree(buf);
 }
-- 
cgit v1.2.2


From c87163b9ae894b94c87746fceddb593e7be62ab4 Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Wed, 8 Jan 2014 10:11:11 +0200
Subject: iwlwifi: mvm: add basic bcast filtering implementation

Broadcast filtering allows dropping broadcast
frames that don't match the configured patterns.

Use predefined filters, and configure them for
each associated station vif.

There is no need to optimize and attach the same
filter to multiple vifs, as a following patch
will configure each filter to have per-vif unique
values.

Configure the bcast filtering on assoc changes.

Add a new IWLWIFI_BCAST_FILTERING Kconfig option
in order to enable broadcast filtering.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/Kconfig        |  13 ++++
 drivers/net/wireless/iwlwifi/iwl-fw.h       |   2 +
 drivers/net/wireless/iwlwifi/mvm/fw-api.h   |  85 ++++++++++++++++++++
 drivers/net/wireless/iwlwifi/mvm/mac80211.c | 116 ++++++++++++++++++++++++++++
 drivers/net/wireless/iwlwifi/mvm/mvm.h      |   5 ++
 drivers/net/wireless/iwlwifi/mvm/ops.c      |   1 +
 6 files changed, 222 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig
index 3eb2102ce236..7fc98814fc2a 100644
--- a/drivers/net/wireless/iwlwifi/Kconfig
+++ b/drivers/net/wireless/iwlwifi/Kconfig
@@ -128,3 +128,16 @@ config IWLWIFI_DEVICE_TRACING
 	  If unsure, say Y so we can help you better when problems
 	  occur.
 endmenu
+
+config IWLWIFI_BCAST_FILTERING
+	bool "Enable broadcast filtering"
+	depends on IWLWIFI
+	help
+	  Say Y here to enable default bcast filtering configuration.
+
+	  Enabling broadcast filtering will drop any incoming wireless
+	  broadcast frames, except some very specific predefined
+	  patterns (e.g. incoming arp requests).
+
+	  If unsure, don't enable this option, as some programs might
+	  expect incoming broadcasts for their normal operations.
diff --git a/drivers/net/wireless/iwlwifi/iwl-fw.h b/drivers/net/wireless/iwlwifi/iwl-fw.h
index 726327782401..b0090e8dff52 100644
--- a/drivers/net/wireless/iwlwifi/iwl-fw.h
+++ b/drivers/net/wireless/iwlwifi/iwl-fw.h
@@ -95,6 +95,7 @@
  * @IWL_UCODE_TLV_FLAGS_P2P_PS: P2P client power save is supported (only on a
  *	single bound interface).
  * @IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD: P2P client supports uAPSD power save
+ * @IWL_UCODE_TLV_FLAGS_BCAST_FILTERING: uCode supports broadcast filtering.
  * @IWL_UCODE_TLV_FLAGS_GO_UAPSD: AP/GO interfaces support uAPSD clients
  */
 enum iwl_ucode_tlv_flag {
@@ -120,6 +121,7 @@ enum iwl_ucode_tlv_flag {
 	IWL_UCODE_TLV_FLAGS_P2P_PS		= BIT(21),
 	IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT	= BIT(24),
 	IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD	= BIT(26),
+	IWL_UCODE_TLV_FLAGS_BCAST_FILTERING	= BIT(29),
 	IWL_UCODE_TLV_FLAGS_GO_UAPSD		= BIT(30),
 };
 
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/iwlwifi/mvm/fw-api.h
index 21ee59e88b85..32844e3f5a85 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api.h
@@ -191,6 +191,7 @@ enum {
 	REPLY_DEBUG_CMD = 0xf0,
 	DEBUG_LOG_MSG = 0xf7,
 
+	BCAST_FILTER_CMD = 0xcf,
 	MCAST_FILTER_CMD = 0xd0,
 
 	/* D3 commands/notifications */
@@ -1156,6 +1157,90 @@ struct iwl_mcast_filter_cmd {
 	u8 addr_list[0];
 } __packed; /* MCAST_FILTERING_CMD_API_S_VER_1 */
 
+#define MAX_BCAST_FILTERS 8
+#define MAX_BCAST_FILTER_ATTRS 2
+
+/**
+ * enum iwl_mvm_bcast_filter_attr_offset - written by fw for each Rx packet
+ * @BCAST_FILTER_OFFSET_PAYLOAD_START: offset is from payload start.
+ * @BCAST_FILTER_OFFSET_IP_END: offset is from ip header end (i.e.
+ *	start of ip payload).
+ */
+enum iwl_mvm_bcast_filter_attr_offset {
+	BCAST_FILTER_OFFSET_PAYLOAD_START = 0,
+	BCAST_FILTER_OFFSET_IP_END = 1,
+};
+
+/**
+ * struct iwl_fw_bcast_filter_attr - broadcast filter attribute
+ * @offset_type:	&enum iwl_mvm_bcast_filter_attr_offset.
+ * @offset:	starting offset of this pattern.
+ * @val:		value to match - big endian (MSB is the first
+ *		byte to match from offset pos).
+ * @mask:	mask to match (big endian).
+ */
+struct iwl_fw_bcast_filter_attr {
+	u8 offset_type;
+	u8 offset;
+	__le16 reserved1;
+	__be32 val;
+	__be32 mask;
+} __packed; /* BCAST_FILTER_ATT_S_VER_1 */
+
+/**
+ * enum iwl_mvm_bcast_filter_frame_type - filter frame type
+ * @BCAST_FILTER_FRAME_TYPE_ALL: consider all frames.
+ * @BCAST_FILTER_FRAME_TYPE_IPV4: consider only ipv4 frames
+ */
+enum iwl_mvm_bcast_filter_frame_type {
+	BCAST_FILTER_FRAME_TYPE_ALL = 0,
+	BCAST_FILTER_FRAME_TYPE_IPV4 = 1,
+};
+
+/**
+ * struct iwl_fw_bcast_filter - broadcast filter
+ * @discard: discard frame (1) or let it pass (0).
+ * @frame_type: &enum iwl_mvm_bcast_filter_frame_type.
+ * @num_attrs: number of valid attributes in this filter.
+ * @attrs: attributes of this filter. a filter is considered matched
+ *	only when all its attributes are matched (i.e. AND relationship)
+ */
+struct iwl_fw_bcast_filter {
+	u8 discard;
+	u8 frame_type;
+	u8 num_attrs;
+	u8 reserved1;
+	struct iwl_fw_bcast_filter_attr attrs[MAX_BCAST_FILTER_ATTRS];
+} __packed; /* BCAST_FILTER_S_VER_1 */
+
+/**
+ * struct iwl_fw_bcast_mac - per-mac broadcast filtering configuration.
+ * @default_discard: default action for this mac (discard (1) / pass (0)).
+ * @attached_filters: bitmap of relevant filters for this mac.
+ */
+struct iwl_fw_bcast_mac {
+	u8 default_discard;
+	u8 reserved1;
+	__le16 attached_filters;
+} __packed; /* BCAST_MAC_CONTEXT_S_VER_1 */
+
+/**
+ * struct iwl_bcast_filter_cmd - broadcast filtering configuration
+ * @disable: enable (0) / disable (1)
+ * @max_bcast_filters: max number of filters (MAX_BCAST_FILTERS)
+ * @max_macs: max number of macs (NUM_MAC_INDEX_DRIVER)
+ * @filters: broadcast filters
+ * @macs: broadcast filtering configuration per-mac
+ */
+struct iwl_bcast_filter_cmd {
+	u8 disable;
+	u8 max_bcast_filters;
+	u8 max_macs;
+	u8 reserved1;
+	struct iwl_fw_bcast_filter filters[MAX_BCAST_FILTERS];
+	struct iwl_fw_bcast_mac macs[NUM_MAC_INDEX_DRIVER];
+} __packed; /* BCAST_FILTERING_HCMD_API_S_VER_1 */
+
 struct mvm_statistics_dbg {
 	__le32 burst_check;
 	__le32 burst_count;
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index 5b9cfe1f35bd..08b8051e56f8 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -872,6 +872,121 @@ out:
 	*total_flags = 0;
 }
 
+#ifdef CONFIG_IWLWIFI_BCAST_FILTERING
+struct iwl_bcast_iter_data {
+	struct iwl_mvm *mvm;
+	struct iwl_bcast_filter_cmd *cmd;
+	u8 current_filter;
+};
+
+static void
+iwl_mvm_set_bcast_filter(struct ieee80211_vif *vif,
+			 const struct iwl_fw_bcast_filter *in_filter,
+			 struct iwl_fw_bcast_filter *out_filter)
+{
+	struct iwl_fw_bcast_filter_attr *attr;
+	int i;
+
+	memcpy(out_filter, in_filter, sizeof(*out_filter));
+
+	for (i = 0; i < ARRAY_SIZE(out_filter->attrs); i++) {
+		attr = &out_filter->attrs[i];
+
+		if (!attr->mask)
+			break;
+
+		out_filter->num_attrs++;
+	}
+}
+
+static void iwl_mvm_bcast_filter_iterator(void *_data, u8 *mac,
+					  struct ieee80211_vif *vif)
+{
+	struct iwl_bcast_iter_data *data = _data;
+	struct iwl_mvm *mvm = data->mvm;
+	struct iwl_bcast_filter_cmd *cmd = data->cmd;
+	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
+	struct iwl_fw_bcast_mac *bcast_mac;
+	int i;
+
+	if (WARN_ON(mvmvif->id >= ARRAY_SIZE(cmd->macs)))
+		return;
+
+	bcast_mac = &cmd->macs[mvmvif->id];
+
+	/* enable filtering only for associated stations */
+	if (vif->type != NL80211_IFTYPE_STATION || !vif->bss_conf.assoc)
+		return;
+
+	bcast_mac->default_discard = 1;
+
+	/* copy all configured filters */
+	for (i = 0; mvm->bcast_filters[i].attrs[0].mask; i++) {
+		/*
+		 * Make sure we don't exceed our filters limit.
+		 * if there is still a valid filter to be configured,
+		 * be on the safe side and just allow bcast for this mac.
+		 */
+		if (WARN_ON_ONCE(data->current_filter >=
+				 ARRAY_SIZE(cmd->filters))) {
+			bcast_mac->default_discard = 0;
+			bcast_mac->attached_filters = 0;
+			break;
+		}
+
+		iwl_mvm_set_bcast_filter(vif,
+					 &mvm->bcast_filters[i],
+					 &cmd->filters[data->current_filter]);
+
+		/* skip current filter if it contains no attributes */
+		if (!cmd->filters[data->current_filter].num_attrs)
+			continue;
+
+		/* attach the filter to current mac */
+		bcast_mac->attached_filters |=
+				cpu_to_le16(BIT(data->current_filter));
+
+		data->current_filter++;
+	}
+}
+
+static int iwl_mvm_configure_bcast_filter(struct iwl_mvm *mvm,
+					  struct ieee80211_vif *vif)
+{
+	/* initialize cmd to pass broadcasts on all vifs */
+	struct iwl_bcast_filter_cmd cmd = {
+		.disable = 0,
+		.max_bcast_filters = ARRAY_SIZE(cmd.filters),
+		.max_macs = ARRAY_SIZE(cmd.macs),
+	};
+	struct iwl_bcast_iter_data iter_data = {
+		.mvm = mvm,
+		.cmd = &cmd,
+	};
+
+	if (!(mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_BCAST_FILTERING))
+		return 0;
+
+	/* if no filters are configured, do nothing */
+	if (!mvm->bcast_filters)
+		return 0;
+
+	/* configure and attach these filters for each associated sta vif */
+	ieee80211_iterate_active_interfaces(
+		mvm->hw, IEEE80211_IFACE_ITER_NORMAL,
+		iwl_mvm_bcast_filter_iterator, &iter_data);
+
+	return iwl_mvm_send_cmd_pdu(mvm, BCAST_FILTER_CMD, CMD_SYNC,
+				    sizeof(cmd), &cmd);
+}
+#else
+static inline int iwl_mvm_configure_bcast_filter(struct iwl_mvm *mvm,
+						 struct ieee80211_vif *vif)
+{
+	return 0;
+}
+#endif
+
 static void iwl_mvm_bss_info_changed_station(struct iwl_mvm *mvm,
 					     struct ieee80211_vif *vif,
 					     struct ieee80211_bss_conf *bss_conf,
@@ -944,6 +1059,7 @@ static void iwl_mvm_bss_info_changed_station(struct iwl_mvm *mvm,
 		}
 
 		iwl_mvm_recalc_multicast(mvm);
+		iwl_mvm_configure_bcast_filter(mvm, vif);
 
 		/* reset rssi values */
 		mvmvif->bf_data.ave_beacon_signal = 0;
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index 00bc4ce06cca..2da17d107ab3 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -497,6 +497,11 @@ struct iwl_mvm {
 	/* rx chain antennas set through debugfs for the scan command */
 	u8 scan_rx_ant;
 
+#ifdef CONFIG_IWLWIFI_BCAST_FILTERING
+	/* broadcast filters to configure for each associated station */
+	const struct iwl_fw_bcast_filter *bcast_filters;
+#endif
+
 	/* Internal station */
 	struct iwl_mvm_int_sta aux_sta;
 
diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c
index fdadfe95d314..24afbd60c02e 100644
--- a/drivers/net/wireless/iwlwifi/mvm/ops.c
+++ b/drivers/net/wireless/iwlwifi/mvm/ops.c
@@ -313,6 +313,7 @@ static const char *iwl_mvm_cmd_strings[REPLY_MAX] = {
 	CMD(BT_PROFILE_NOTIFICATION),
 	CMD(BT_CONFIG),
 	CMD(MCAST_FILTER_CMD),
+	CMD(BCAST_FILTER_CMD),
 	CMD(REPLY_SF_CFG_CMD),
 	CMD(REPLY_BEACON_FILTERING_CMD),
 	CMD(REPLY_THERMAL_MNG_BACKOFF),
-- 
cgit v1.2.2


From 777369237b1dfdd9bc11b855d8f08fe724b60c35 Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Tue, 14 Jan 2014 12:35:49 +0200
Subject: iwlwifi: mvm: add predefined broadcast filter configuration

Configure arp request broadcast filter if this
option is enabled, in order to allow only arp
request broadcasts to pass-in.

(A following patch will make this filter even narrower
by limiting the arp request to our own ip)

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/mac80211.c | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index 08b8051e56f8..6f9640b68771 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -128,6 +128,28 @@ static const struct wiphy_wowlan_tcp_support iwl_mvm_wowlan_tcp_support = {
 };
 #endif
 
+#ifdef CONFIG_IWLWIFI_BCAST_FILTERING
+static const struct iwl_fw_bcast_filter iwl_mvm_default_bcast_filters[] = {
+	{
+		/* arp */
+		.discard = 0,
+		.frame_type = BCAST_FILTER_FRAME_TYPE_ALL,
+		.attrs = {
+			{
+				/* frame type - arp, hw type - ethernet */
+				.offset_type =
+					BCAST_FILTER_OFFSET_PAYLOAD_START,
+				.offset = sizeof(rfc1042_header),
+				.val = cpu_to_be32(0x08060001),
+				.mask = cpu_to_be32(0xffffffff),
+			},
+		},
+	},
+	/* last filter must be empty */
+	{},
+};
+#endif
+
 static void iwl_mvm_reset_phy_ctxts(struct iwl_mvm *mvm)
 {
 	int i;
@@ -292,6 +314,11 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm)
 	}
 #endif
 
+#ifdef CONFIG_IWLWIFI_BCAST_FILTERING
+	/* assign default bcast filtering configuration */
+	mvm->bcast_filters = iwl_mvm_default_bcast_filters;
+#endif
+
 	ret = iwl_mvm_leds_init(mvm);
 	if (ret)
 		return ret;
-- 
cgit v1.2.2


From 2ee8f021dd805a89395e503f373ad89541869fa9 Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Mon, 13 Jan 2014 19:07:09 +0200
Subject: iwlwifi: mvm: add dest ip to bcast filter configuration

Add our ip as a new attribute to the bcast filtering
configuration (i.e. check the dest ip field of the
arp request).

Add bcast filter to pass incoming dhcp offer
broadcast frames as well (for sta vifs).

In order to support such dynamic configuration,
use the reserved1 field as a bitmap for driver internal
flags (which will indicate we want to configure the ip
in this attribute), and reconfigure the bcast
filtering on BSS_CHANGED_ARP_FILTER indication.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/mac80211.c | 73 +++++++++++++++++++++++++++++
 1 file changed, 73 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index 6f9640b68771..b3f6c2b292ac 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -66,6 +66,7 @@
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 #include <linux/ip.h>
+#include <linux/if_arp.h>
 #include <net/mac80211.h>
 #include <net/tcp.h>
 
@@ -129,6 +130,23 @@ static const struct wiphy_wowlan_tcp_support iwl_mvm_wowlan_tcp_support = {
 #endif
 
 #ifdef CONFIG_IWLWIFI_BCAST_FILTERING
+/*
+ * Use the reserved field to indicate magic values.
+ * these values will only be used internally by the driver,
+ * and won't make it to the fw (reserved will be 0).
+ * BC_FILTER_MAGIC_IP - configure the val of this attribute to
+ *	be the vif's ip address. in case there is not a single
+ *	ip address (0, or more than 1), this attribute will
+ *	be skipped.
+ * BC_FILTER_MAGIC_MAC - set the val of this attribute to
+ *	the LSB bytes of the vif's mac address
+ */
+enum {
+	BC_FILTER_MAGIC_NONE = 0,
+	BC_FILTER_MAGIC_IP,
+	BC_FILTER_MAGIC_MAC,
+};
+
 static const struct iwl_fw_bcast_filter iwl_mvm_default_bcast_filters[] = {
 	{
 		/* arp */
@@ -143,6 +161,40 @@ static const struct iwl_fw_bcast_filter iwl_mvm_default_bcast_filters[] = {
 				.val = cpu_to_be32(0x08060001),
 				.mask = cpu_to_be32(0xffffffff),
 			},
+			{
+				/* arp dest ip */
+				.offset_type =
+					BCAST_FILTER_OFFSET_PAYLOAD_START,
+				.offset = sizeof(rfc1042_header) + 2 +
+					  sizeof(struct arphdr) +
+					  ETH_ALEN + sizeof(__be32) +
+					  ETH_ALEN,
+				.mask = cpu_to_be32(0xffffffff),
+				/* mark it as special field */
+				.reserved1 = cpu_to_le16(BC_FILTER_MAGIC_IP),
+			},
+		},
+	},
+	{
+		/* dhcp offer bcast */
+		.discard = 0,
+		.frame_type = BCAST_FILTER_FRAME_TYPE_IPV4,
+		.attrs = {
+			{
+				/* udp dest port - 68 (bootp client)*/
+				.offset_type = BCAST_FILTER_OFFSET_IP_END,
+				.offset = offsetof(struct udphdr, dest),
+				.val = cpu_to_be32(0x00440000),
+				.mask = cpu_to_be32(0xffff0000),
+			},
+			{
+				/* dhcp - lsb bytes of client hw address */
+				.offset_type = BCAST_FILTER_OFFSET_IP_END,
+				.offset = 38,
+				.mask = cpu_to_be32(0xffffffff),
+				/* mark it as special field */
+				.reserved1 = cpu_to_le16(BC_FILTER_MAGIC_MAC),
+			},
 		},
 	},
 	/* last filter must be empty */
@@ -922,6 +974,22 @@ iwl_mvm_set_bcast_filter(struct ieee80211_vif *vif,
 		if (!attr->mask)
 			break;
 
+		switch (attr->reserved1) {
+		case cpu_to_le16(BC_FILTER_MAGIC_IP):
+			if (vif->bss_conf.arp_addr_cnt != 1) {
+				attr->mask = 0;
+				continue;
+			}
+
+			attr->val = vif->bss_conf.arp_addr_list[0];
+			break;
+		case cpu_to_le16(BC_FILTER_MAGIC_MAC):
+			attr->val = *(__be32 *)&vif->addr[2];
+			break;
+		default:
+			break;
+		}
+		attr->reserved1 = 0;
 		out_filter->num_attrs++;
 	}
 }
@@ -1130,6 +1198,11 @@ static void iwl_mvm_bss_info_changed_station(struct iwl_mvm *mvm,
 		if (ret)
 			IWL_ERR(mvm, "failed to update CQM thresholds\n");
 	}
+
+	if (changes & BSS_CHANGED_ARP_FILTER) {
+		IWL_DEBUG_MAC80211(mvm, "arp filter changed");
+		iwl_mvm_configure_bcast_filter(mvm, vif);
+	}
 }
 
 static int iwl_mvm_start_ap_ibss(struct ieee80211_hw *hw,
-- 
cgit v1.2.2


From de06a59e36662f6adf2a5248f219ea0a1d42ed5b Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Wed, 8 Jan 2014 10:11:12 +0200
Subject: iwlwifi: mvm: add bcast_filtering debugfs entries

Allow reading and setting bcast filtering configuration
through debugfs.

By default, mvm->bcast_filters is used for setting
the bcast filtering configuration (these filters
will be configured for each associated station).

For testing purposes, allow overriding this configuration,
and setting the bcast filtering configuration manually.
The following debugfs keys can be used:
* bcast_filtering/override - use debugfs values instead
	of default configuration
* bcast_filtering/filters - set filters (+ attributes)
* bcast_filtering/macs - per-mac bcast filtering
	configuration (policy + attached filters)

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/debugfs.c  | 213 +++++++++++++++++++++++++++-
 drivers/net/wireless/iwlwifi/mvm/mac80211.c |  43 ++++--
 drivers/net/wireless/iwlwifi/mvm/mvm.h      |   8 ++
 3 files changed, 250 insertions(+), 14 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/debugfs.c b/drivers/net/wireless/iwlwifi/mvm/debugfs.c
index 8d3bf25f00d6..6ddc18896608 100644
--- a/drivers/net/wireless/iwlwifi/mvm/debugfs.c
+++ b/drivers/net/wireless/iwlwifi/mvm/debugfs.c
@@ -599,6 +599,187 @@ iwl_dbgfs_scan_ant_rxchain_write(struct iwl_mvm *mvm, char *buf,
 	return count;
 }
 
+#define ADD_TEXT(...) pos += scnprintf(buf + pos, bufsz - pos, __VA_ARGS__)
+#ifdef CONFIG_IWLWIFI_BCAST_FILTERING
+static ssize_t iwl_dbgfs_bcast_filters_read(struct file *file,
+					    char __user *user_buf,
+					    size_t count, loff_t *ppos)
+{
+	struct iwl_mvm *mvm = file->private_data;
+	struct iwl_bcast_filter_cmd cmd;
+	const struct iwl_fw_bcast_filter *filter;
+	char *buf;
+	int bufsz = 1024;
+	int i, j, pos = 0;
+	ssize_t ret;
+
+	buf = kzalloc(bufsz, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	mutex_lock(&mvm->mutex);
+	if (!iwl_mvm_bcast_filter_build_cmd(mvm, &cmd)) {
+		ADD_TEXT("None\n");
+		mutex_unlock(&mvm->mutex);
+		goto out;
+	}
+	mutex_unlock(&mvm->mutex);
+
+	for (i = 0; cmd.filters[i].attrs[0].mask; i++) {
+		filter = &cmd.filters[i];
+
+		ADD_TEXT("Filter [%d]:\n", i);
+		ADD_TEXT("\tDiscard=%d\n", filter->discard);
+		ADD_TEXT("\tFrame Type: %s\n",
+			 filter->frame_type ? "IPv4" : "Generic");
+
+		for (j = 0; j < ARRAY_SIZE(filter->attrs); j++) {
+			const struct iwl_fw_bcast_filter_attr *attr;
+
+			attr = &filter->attrs[j];
+			if (!attr->mask)
+				break;
+
+			ADD_TEXT("\tAttr [%d]: offset=%d (from %s), mask=0x%x, value=0x%x reserved=0x%x\n",
+				 j, attr->offset,
+				 attr->offset_type ? "IP End" :
+						     "Payload Start",
+				 be32_to_cpu(attr->mask),
+				 be32_to_cpu(attr->val),
+				 le16_to_cpu(attr->reserved1));
+		}
+	}
+out:
+	ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+	kfree(buf);
+	return ret;
+}
+
+static ssize_t iwl_dbgfs_bcast_filters_write(struct iwl_mvm *mvm, char *buf,
+					     size_t count, loff_t *ppos)
+{
+	int pos, next_pos;
+	struct iwl_fw_bcast_filter filter = {};
+	struct iwl_bcast_filter_cmd cmd;
+	u32 filter_id, attr_id, mask, value;
+	int err = 0;
+
+	if (sscanf(buf, "%d %hhi %hhi %n", &filter_id, &filter.discard,
+		   &filter.frame_type, &pos) != 3)
+		return -EINVAL;
+
+	if (filter_id >= ARRAY_SIZE(mvm->dbgfs_bcast_filtering.cmd.filters) ||
+	    filter.frame_type > BCAST_FILTER_FRAME_TYPE_IPV4)
+		return -EINVAL;
+
+	for (attr_id = 0; attr_id < ARRAY_SIZE(filter.attrs);
+	     attr_id++) {
+		struct iwl_fw_bcast_filter_attr *attr =
+				&filter.attrs[attr_id];
+
+		if (pos >= count)
+			break;
+
+		if (sscanf(&buf[pos], "%hhi %hhi %i %i %n",
+			   &attr->offset, &attr->offset_type,
+			   &mask, &value, &next_pos) != 4)
+			return -EINVAL;
+
+		attr->mask = cpu_to_be32(mask);
+		attr->val = cpu_to_be32(value);
+		if (mask)
+			filter.num_attrs++;
+
+		pos += next_pos;
+	}
+
+	mutex_lock(&mvm->mutex);
+	memcpy(&mvm->dbgfs_bcast_filtering.cmd.filters[filter_id],
+	       &filter, sizeof(filter));
+
+	/* send updated bcast filtering configuration */
+	if (mvm->dbgfs_bcast_filtering.override &&
+	    iwl_mvm_bcast_filter_build_cmd(mvm, &cmd))
+		err = iwl_mvm_send_cmd_pdu(mvm, BCAST_FILTER_CMD, CMD_SYNC,
+					   sizeof(cmd), &cmd);
+	mutex_unlock(&mvm->mutex);
+
+	return err ?: count;
+}
+
+static ssize_t iwl_dbgfs_bcast_filters_macs_read(struct file *file,
+						 char __user *user_buf,
+						 size_t count, loff_t *ppos)
+{
+	struct iwl_mvm *mvm = file->private_data;
+	struct iwl_bcast_filter_cmd cmd;
+	char *buf;
+	int bufsz = 1024;
+	int i, pos = 0;
+	ssize_t ret;
+
+	buf = kzalloc(bufsz, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	mutex_lock(&mvm->mutex);
+	if (!iwl_mvm_bcast_filter_build_cmd(mvm, &cmd)) {
+		ADD_TEXT("None\n");
+		mutex_unlock(&mvm->mutex);
+		goto out;
+	}
+	mutex_unlock(&mvm->mutex);
+
+	for (i = 0; i < ARRAY_SIZE(cmd.macs); i++) {
+		const struct iwl_fw_bcast_mac *mac = &cmd.macs[i];
+
+		ADD_TEXT("Mac [%d]: discard=%d attached_filters=0x%x\n",
+			 i, mac->default_discard, mac->attached_filters);
+	}
+out:
+	ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+	kfree(buf);
+	return ret;
+}
+
+static ssize_t iwl_dbgfs_bcast_filters_macs_write(struct iwl_mvm *mvm,
+						  char *buf, size_t count,
+						  loff_t *ppos)
+{
+	struct iwl_bcast_filter_cmd cmd;
+	struct iwl_fw_bcast_mac mac = {};
+	u32 mac_id, attached_filters;
+	int err = 0;
+
+	if (!mvm->bcast_filters)
+		return -ENOENT;
+
+	if (sscanf(buf, "%d %hhi %i", &mac_id, &mac.default_discard,
+		   &attached_filters) != 3)
+		return -EINVAL;
+
+	if (mac_id >= ARRAY_SIZE(cmd.macs) ||
+	    mac.default_discard > 1 ||
+	    attached_filters >= BIT(ARRAY_SIZE(cmd.filters)))
+		return -EINVAL;
+
+	mac.attached_filters = cpu_to_le16(attached_filters);
+
+	mutex_lock(&mvm->mutex);
+	memcpy(&mvm->dbgfs_bcast_filtering.cmd.macs[mac_id],
+	       &mac, sizeof(mac));
+
+	/* send updated bcast filtering configuration */
+	if (mvm->dbgfs_bcast_filtering.override &&
+	    iwl_mvm_bcast_filter_build_cmd(mvm, &cmd))
+		err = iwl_mvm_send_cmd_pdu(mvm, BCAST_FILTER_CMD, CMD_SYNC,
+					   sizeof(cmd), &cmd);
+	mutex_unlock(&mvm->mutex);
+
+	return err ?: count;
+}
+#endif
+
 #ifdef CONFIG_PM_SLEEP
 static ssize_t iwl_dbgfs_d3_sram_write(struct iwl_mvm *mvm, char *buf,
 				       size_t count, loff_t *ppos)
@@ -661,11 +842,13 @@ static ssize_t iwl_dbgfs_d3_sram_read(struct file *file, char __user *user_buf,
 	_MVM_DEBUGFS_WRITE_FILE_OPS(name, bufsz, struct iwl_mvm)
 #define MVM_DEBUGFS_READ_WRITE_FILE_OPS(name, bufsz) \
 	_MVM_DEBUGFS_READ_WRITE_FILE_OPS(name, bufsz, struct iwl_mvm)
-#define MVM_DEBUGFS_ADD_FILE(name, parent, mode) do {			\
-		if (!debugfs_create_file(#name, mode, parent, mvm,	\
+#define MVM_DEBUGFS_ADD_FILE_ALIAS(alias, name, parent, mode) do {	\
+		if (!debugfs_create_file(alias, mode, parent, mvm,	\
 					 &iwl_dbgfs_##name##_ops))	\
 			goto err;					\
 	} while (0)
+#define MVM_DEBUGFS_ADD_FILE(name, parent, mode) \
+	MVM_DEBUGFS_ADD_FILE_ALIAS(#name, name, parent, mode)
 
 /* Device wide debugfs entries */
 MVM_DEBUGFS_WRITE_FILE_OPS(tx_flush, 16);
@@ -680,12 +863,18 @@ MVM_DEBUGFS_WRITE_FILE_OPS(fw_restart, 10);
 MVM_DEBUGFS_WRITE_FILE_OPS(fw_nmi, 10);
 MVM_DEBUGFS_READ_WRITE_FILE_OPS(scan_ant_rxchain, 8);
 
+#ifdef CONFIG_IWLWIFI_BCAST_FILTERING
+MVM_DEBUGFS_READ_WRITE_FILE_OPS(bcast_filters, 256);
+MVM_DEBUGFS_READ_WRITE_FILE_OPS(bcast_filters_macs, 256);
+#endif
+
 #ifdef CONFIG_PM_SLEEP
 MVM_DEBUGFS_READ_WRITE_FILE_OPS(d3_sram, 8);
 #endif
 
 int iwl_mvm_dbgfs_register(struct iwl_mvm *mvm, struct dentry *dbgfs_dir)
 {
+	struct dentry *bcast_dir __maybe_unused;
 	char buf[100];
 
 	mvm->debugfs_dir = dbgfs_dir;
@@ -704,6 +893,26 @@ int iwl_mvm_dbgfs_register(struct iwl_mvm *mvm, struct dentry *dbgfs_dir)
 	MVM_DEBUGFS_ADD_FILE(fw_nmi, mvm->debugfs_dir, S_IWUSR);
 	MVM_DEBUGFS_ADD_FILE(scan_ant_rxchain, mvm->debugfs_dir,
 			     S_IWUSR | S_IRUSR);
+
+#ifdef CONFIG_IWLWIFI_BCAST_FILTERING
+	if (mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_BCAST_FILTERING) {
+		bcast_dir = debugfs_create_dir("bcast_filtering",
+					       mvm->debugfs_dir);
+		if (!bcast_dir)
+			goto err;
+
+		if (!debugfs_create_bool("override", S_IRUSR | S_IWUSR,
+				bcast_dir,
+				&mvm->dbgfs_bcast_filtering.override))
+			goto err;
+
+		MVM_DEBUGFS_ADD_FILE_ALIAS("filters", bcast_filters,
+					   bcast_dir, S_IWUSR | S_IRUSR);
+		MVM_DEBUGFS_ADD_FILE_ALIAS("macs", bcast_filters_macs,
+					   bcast_dir, S_IWUSR | S_IRUSR);
+	}
+#endif
+
 #ifdef CONFIG_PM_SLEEP
 	MVM_DEBUGFS_ADD_FILE(d3_sram, mvm->debugfs_dir, S_IRUSR | S_IWUSR);
 	MVM_DEBUGFS_ADD_FILE(d3_test, mvm->debugfs_dir, S_IRUSR);
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index b3f6c2b292ac..67c0dfcc7285 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -1045,32 +1045,51 @@ static void iwl_mvm_bcast_filter_iterator(void *_data, u8 *mac,
 	}
 }
 
-static int iwl_mvm_configure_bcast_filter(struct iwl_mvm *mvm,
-					  struct ieee80211_vif *vif)
+bool iwl_mvm_bcast_filter_build_cmd(struct iwl_mvm *mvm,
+				    struct iwl_bcast_filter_cmd *cmd)
 {
-	/* initialize cmd to pass broadcasts on all vifs */
-	struct iwl_bcast_filter_cmd cmd = {
-		.disable = 0,
-		.max_bcast_filters = ARRAY_SIZE(cmd.filters),
-		.max_macs = ARRAY_SIZE(cmd.macs),
-	};
 	struct iwl_bcast_iter_data iter_data = {
 		.mvm = mvm,
-		.cmd = &cmd,
+		.cmd = cmd,
 	};
 
-	if (!(mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_BCAST_FILTERING))
-		return 0;
+	memset(cmd, 0, sizeof(*cmd));
+	cmd->max_bcast_filters = ARRAY_SIZE(cmd->filters);
+	cmd->max_macs = ARRAY_SIZE(cmd->macs);
+
+#ifdef CONFIG_IWLWIFI_DEBUGFS
+	/* use debugfs filters/macs if override is configured */
+	if (mvm->dbgfs_bcast_filtering.override) {
+		memcpy(cmd->filters, &mvm->dbgfs_bcast_filtering.cmd.filters,
+		       sizeof(cmd->filters));
+		memcpy(cmd->macs, &mvm->dbgfs_bcast_filtering.cmd.macs,
+		       sizeof(cmd->macs));
+		return true;
+	}
+#endif
 
 	/* if no filters are configured, do nothing */
 	if (!mvm->bcast_filters)
-		return 0;
+		return false;
 
 	/* configure and attach these filters for each associated sta vif */
 	ieee80211_iterate_active_interfaces(
 		mvm->hw, IEEE80211_IFACE_ITER_NORMAL,
 		iwl_mvm_bcast_filter_iterator, &iter_data);
 
+	return true;
+}
+static int iwl_mvm_configure_bcast_filter(struct iwl_mvm *mvm,
+					  struct ieee80211_vif *vif)
+{
+	struct iwl_bcast_filter_cmd cmd;
+
+	if (!(mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_BCAST_FILTERING))
+		return 0;
+
+	if (!iwl_mvm_bcast_filter_build_cmd(mvm, &cmd))
+		return 0;
+
 	return iwl_mvm_send_cmd_pdu(mvm, BCAST_FILTER_CMD, CMD_SYNC,
 				    sizeof(cmd), &cmd);
 }
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index 2da17d107ab3..43f13ab5722c 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -500,6 +500,12 @@ struct iwl_mvm {
 #ifdef CONFIG_IWLWIFI_BCAST_FILTERING
 	/* broadcast filters to configure for each associated station */
 	const struct iwl_fw_bcast_filter *bcast_filters;
+#ifdef CONFIG_IWLWIFI_DEBUGFS
+	struct {
+		u32 override; /* u32 for debugfs_create_bool */
+		struct iwl_bcast_filter_cmd cmd;
+	} dbgfs_bcast_filtering;
+#endif
 #endif
 
 	/* Internal station */
@@ -687,6 +693,8 @@ int iwl_mvm_up(struct iwl_mvm *mvm);
 int iwl_mvm_load_d3_fw(struct iwl_mvm *mvm);
 
 int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm);
+bool iwl_mvm_bcast_filter_build_cmd(struct iwl_mvm *mvm,
+				    struct iwl_bcast_filter_cmd *cmd);
 
 /*
  * FW notifications / CMD responses handlers
-- 
cgit v1.2.2


From 32a65c3419cb618067c0f839b686b6bd3ecc1dbf Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Sun, 12 Jan 2014 11:19:13 +0200
Subject: iwlwifi: mvm: allow to force reduced tx power from debugfs

This will be useful during tests done on the physical layer.

Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/bt-coex.c     |  6 ++--
 drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c | 40 +++++++++++++++++++++++---
 drivers/net/wireless/iwlwifi/mvm/mvm.h         |  1 +
 drivers/net/wireless/iwlwifi/mvm/sta.h         |  3 ++
 4 files changed, 43 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/bt-coex.c b/drivers/net/wireless/iwlwifi/mvm/bt-coex.c
index ed20f4e7a3fd..9649a43c854d 100644
--- a/drivers/net/wireless/iwlwifi/mvm/bt-coex.c
+++ b/drivers/net/wireless/iwlwifi/mvm/bt-coex.c
@@ -489,8 +489,7 @@ static int iwl_mvm_bt_udpate_ctrl_kill_msk(struct iwl_mvm *mvm,
 	return ret;
 }
 
-static int iwl_mvm_bt_coex_reduced_txp(struct iwl_mvm *mvm, u8 sta_id,
-				       bool enable)
+int iwl_mvm_bt_coex_reduced_txp(struct iwl_mvm *mvm, u8 sta_id, bool enable)
 {
 	struct iwl_bt_coex_cmd *bt_cmd;
 	/* Send ASYNC since this can be sent from an atomic context */
@@ -508,7 +507,8 @@ static int iwl_mvm_bt_coex_reduced_txp(struct iwl_mvm *mvm, u8 sta_id,
 		return 0;
 
 	/* nothing to do */
-	if (mvmsta->bt_reduced_txpower == enable)
+	if (mvmsta->bt_reduced_txpower_dbg ||
+	    mvmsta->bt_reduced_txpower == enable)
 		return 0;
 
 	bt_cmd = kzalloc(sizeof(*bt_cmd), GFP_ATOMIC);
diff --git a/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c b/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c
index 19ecade5ec5f..919470954e5b 100644
--- a/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c
+++ b/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c
@@ -249,9 +249,10 @@ static ssize_t iwl_dbgfs_mac_params_read(struct file *file,
 			struct iwl_mvm_sta *mvm_sta = (void *)sta->drv_priv;
 
 			pos += scnprintf(buf+pos, bufsz-pos,
-					 "ap_sta_id %d - reduced Tx power %d\n",
+					 "ap_sta_id %d - reduced Tx power %d force %d\n",
 					 ap_sta_id,
-					 mvm_sta->bt_reduced_txpower);
+					 mvm_sta->bt_reduced_txpower,
+					 mvm_sta->bt_reduced_txpower_dbg);
 		}
 	}
 
@@ -269,6 +270,36 @@ static ssize_t iwl_dbgfs_mac_params_read(struct file *file,
 	return simple_read_from_buffer(user_buf, count, ppos, buf, pos);
 }
 
+static ssize_t iwl_dbgfs_reduced_txp_write(struct ieee80211_vif *vif,
+					   char *buf, size_t count,
+					   loff_t *ppos)
+{
+	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
+	struct iwl_mvm *mvm = mvmvif->mvm;
+	struct iwl_mvm_sta *mvmsta;
+	bool reduced_tx_power;
+	int ret;
+
+	if (mvmvif->ap_sta_id >= ARRAY_SIZE(mvm->fw_id_to_mac_id))
+		return -ENOTCONN;
+
+	if (strtobool(buf, &reduced_tx_power) != 0)
+		return -EINVAL;
+
+	mutex_lock(&mvm->mutex);
+
+	mvmsta = iwl_mvm_sta_from_staid_protected(mvm, mvmvif->ap_sta_id);
+	mvmsta->bt_reduced_txpower_dbg = false;
+	ret = iwl_mvm_bt_coex_reduced_txp(mvm, mvmvif->ap_sta_id,
+					  reduced_tx_power);
+	if (!ret)
+		mvmsta->bt_reduced_txpower_dbg = true;
+
+	mutex_unlock(&mvm->mutex);
+
+	return ret ? : count;
+}
+
 static void iwl_dbgfs_update_bf(struct ieee80211_vif *vif,
 				enum iwl_dbgfs_bf_mask param, int value)
 {
@@ -509,6 +540,7 @@ MVM_DEBUGFS_READ_FILE_OPS(mac_params);
 MVM_DEBUGFS_READ_WRITE_FILE_OPS(pm_params, 32);
 MVM_DEBUGFS_READ_WRITE_FILE_OPS(bf_params, 256);
 MVM_DEBUGFS_READ_WRITE_FILE_OPS(low_latency, 10);
+MVM_DEBUGFS_WRITE_FILE_OPS(reduced_txp, 10);
 
 void iwl_mvm_vif_dbgfs_register(struct iwl_mvm *mvm, struct ieee80211_vif *vif)
 {
@@ -539,8 +571,8 @@ void iwl_mvm_vif_dbgfs_register(struct iwl_mvm *mvm, struct ieee80211_vif *vif)
 		MVM_DEBUGFS_ADD_FILE_VIF(pm_params, mvmvif->dbgfs_dir, S_IWUSR |
 					 S_IRUSR);
 
-	MVM_DEBUGFS_ADD_FILE_VIF(mac_params, mvmvif->dbgfs_dir,
-				 S_IRUSR);
+	MVM_DEBUGFS_ADD_FILE_VIF(mac_params, mvmvif->dbgfs_dir, S_IRUSR);
+	MVM_DEBUGFS_ADD_FILE_VIF(reduced_txp, mvmvif->dbgfs_dir, S_IWUSR);
 	MVM_DEBUGFS_ADD_FILE_VIF(low_latency, mvmvif->dbgfs_dir,
 				 S_IRUSR | S_IWUSR);
 
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index 43f13ab5722c..80052d9c28ef 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -888,6 +888,7 @@ u16 iwl_mvm_bt_coex_agg_time_limit(struct iwl_mvm *mvm,
 				   struct ieee80211_sta *sta);
 bool iwl_mvm_bt_coex_is_mimo_allowed(struct iwl_mvm *mvm,
 				     struct ieee80211_sta *sta);
+int iwl_mvm_bt_coex_reduced_txp(struct iwl_mvm *mvm, u8 sta_id, bool enable);
 
 enum iwl_bt_kill_msk {
 	BT_KILL_MSK_DEFAULT,
diff --git a/drivers/net/wireless/iwlwifi/mvm/sta.h b/drivers/net/wireless/iwlwifi/mvm/sta.h
index 64f9a1bf7c43..5ecabddc1dbf 100644
--- a/drivers/net/wireless/iwlwifi/mvm/sta.h
+++ b/drivers/net/wireless/iwlwifi/mvm/sta.h
@@ -284,6 +284,8 @@ static inline u16 iwl_mvm_tid_queued(struct iwl_mvm_tid_data *tid_data)
  * @tid_disable_agg: bitmap: if bit(tid) is set, the fw won't send ampdus for
  *	tid.
  * @max_agg_bufsize: the maximal size of the AGG buffer for this station
+ * @bt_reduced_txpower_dbg: debug mode in which %bt_reduced_txpower is forced
+ *	by debugfs.
  * @bt_reduced_txpower: is reduced tx power enabled for this station
  * @next_status_eosp: the next reclaimed packet is a PS-Poll response and
  *	we need to signal the EOSP
@@ -304,6 +306,7 @@ struct iwl_mvm_sta {
 	u32 mac_id_n_color;
 	u16 tid_disable_agg;
 	u8 max_agg_bufsize;
+	bool bt_reduced_txpower_dbg;
 	bool bt_reduced_txpower;
 	bool next_status_eosp;
 	spinlock_t lock;
-- 
cgit v1.2.2


From a34529e893a343ceed0bde81efa2487a1a1dec25 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Mon, 20 Jan 2014 22:57:21 +0100
Subject: iwlwifi: rs: use const u16 for throughput tables

This makes the code a little bit longer as zero-extension
has to be done (mov vs. movzwl), but that's miniscule and
the space saving is significant, about 600 bytes in DVM
and 700 bytes in MVM, so the cache effect should be worth
the few bytes more code.

While at it, remove two spurious blank lines in variable
declaration blocks.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/Kconfig  | 27 ++++++++++++++-------------
 drivers/net/wireless/iwlwifi/dvm/rs.c | 19 +++++++++----------
 drivers/net/wireless/iwlwifi/dvm/rs.h |  2 +-
 drivers/net/wireless/iwlwifi/mvm/rs.c | 23 +++++++++++------------
 drivers/net/wireless/iwlwifi/mvm/rs.h |  2 +-
 5 files changed, 36 insertions(+), 37 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig
index 7fc98814fc2a..74b3b4de7bb7 100644
--- a/drivers/net/wireless/iwlwifi/Kconfig
+++ b/drivers/net/wireless/iwlwifi/Kconfig
@@ -68,6 +68,19 @@ config IWLWIFI_OPMODE_MODULAR
 comment "WARNING: iwlwifi is useless without IWLDVM or IWLMVM"
 	depends on IWLWIFI && IWLDVM=n && IWLMVM=n
 
+config IWLWIFI_BCAST_FILTERING
+	bool "Enable broadcast filtering"
+	depends on IWLMVM
+	help
+	  Say Y here to enable default bcast filtering configuration.
+
+	  Enabling broadcast filtering will drop any incoming wireless
+	  broadcast frames, except some very specific predefined
+	  patterns (e.g. incoming arp requests).
+
+	  If unsure, don't enable this option, as some programs might
+	  expect incoming broadcasts for their normal operations.
+
 menu "Debugging Options"
 	depends on IWLWIFI
 
@@ -111,6 +124,7 @@ config IWLWIFI_DEBUG_EXPERIMENTAL_UCODE
 	  Enable use of experimental ucode for testing and debugging.
 
 config IWLWIFI_DEVICE_TRACING
+
 	bool "iwlwifi device access tracing"
 	depends on IWLWIFI
 	depends on EVENT_TRACING
@@ -128,16 +142,3 @@ config IWLWIFI_DEVICE_TRACING
 	  If unsure, say Y so we can help you better when problems
 	  occur.
 endmenu
-
-config IWLWIFI_BCAST_FILTERING
-	bool "Enable broadcast filtering"
-	depends on IWLWIFI
-	help
-	  Say Y here to enable default bcast filtering configuration.
-
-	  Enabling broadcast filtering will drop any incoming wireless
-	  broadcast frames, except some very specific predefined
-	  patterns (e.g. incoming arp requests).
-
-	  If unsure, don't enable this option, as some programs might
-	  expect incoming broadcasts for their normal operations.
diff --git a/drivers/net/wireless/iwlwifi/dvm/rs.c b/drivers/net/wireless/iwlwifi/dvm/rs.c
index 0977d93b529d..5e232b925455 100644
--- a/drivers/net/wireless/iwlwifi/dvm/rs.c
+++ b/drivers/net/wireless/iwlwifi/dvm/rs.c
@@ -176,46 +176,46 @@ static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta,
  * (2.4 GHz) band.
  */
 
-static s32 expected_tpt_legacy[IWL_RATE_COUNT] = {
+static const u16 expected_tpt_legacy[IWL_RATE_COUNT] = {
 	7, 13, 35, 58, 40, 57, 72, 98, 121, 154, 177, 186, 0
 };
 
-static s32 expected_tpt_siso20MHz[4][IWL_RATE_COUNT] = {
+static const u16 expected_tpt_siso20MHz[4][IWL_RATE_COUNT] = {
 	{0, 0, 0, 0, 42, 0,  76, 102, 124, 159, 183, 193, 202}, /* Norm */
 	{0, 0, 0, 0, 46, 0,  82, 110, 132, 168, 192, 202, 210}, /* SGI */
 	{0, 0, 0, 0, 47, 0,  91, 133, 171, 242, 305, 334, 362}, /* AGG */
 	{0, 0, 0, 0, 52, 0, 101, 145, 187, 264, 330, 361, 390}, /* AGG+SGI */
 };
 
-static s32 expected_tpt_siso40MHz[4][IWL_RATE_COUNT] = {
+static const u16 expected_tpt_siso40MHz[4][IWL_RATE_COUNT] = {
 	{0, 0, 0, 0,  77, 0, 127, 160, 184, 220, 242, 250, 257}, /* Norm */
 	{0, 0, 0, 0,  83, 0, 135, 169, 193, 229, 250, 257, 264}, /* SGI */
 	{0, 0, 0, 0,  94, 0, 177, 249, 313, 423, 512, 550, 586}, /* AGG */
 	{0, 0, 0, 0, 104, 0, 193, 270, 338, 454, 545, 584, 620}, /* AGG+SGI */
 };
 
-static s32 expected_tpt_mimo2_20MHz[4][IWL_RATE_COUNT] = {
+static const u16 expected_tpt_mimo2_20MHz[4][IWL_RATE_COUNT] = {
 	{0, 0, 0, 0,  74, 0, 123, 155, 179, 214, 236, 244, 251}, /* Norm */
 	{0, 0, 0, 0,  81, 0, 131, 164, 188, 223, 243, 251, 257}, /* SGI */
 	{0, 0, 0, 0,  89, 0, 167, 235, 296, 402, 488, 526, 560}, /* AGG */
 	{0, 0, 0, 0,  97, 0, 182, 255, 320, 431, 520, 558, 593}, /* AGG+SGI*/
 };
 
-static s32 expected_tpt_mimo2_40MHz[4][IWL_RATE_COUNT] = {
+static const u16 expected_tpt_mimo2_40MHz[4][IWL_RATE_COUNT] = {
 	{0, 0, 0, 0, 123, 0, 182, 214, 235, 264, 279, 285, 289}, /* Norm */
 	{0, 0, 0, 0, 131, 0, 191, 222, 242, 270, 284, 289, 293}, /* SGI */
 	{0, 0, 0, 0, 171, 0, 305, 410, 496, 634, 731, 771, 805}, /* AGG */
 	{0, 0, 0, 0, 186, 0, 329, 439, 527, 667, 764, 803, 838}, /* AGG+SGI */
 };
 
-static s32 expected_tpt_mimo3_20MHz[4][IWL_RATE_COUNT] = {
+static const u16 expected_tpt_mimo3_20MHz[4][IWL_RATE_COUNT] = {
 	{0, 0, 0, 0,  99, 0, 153, 186, 208, 239, 256, 263, 268}, /* Norm */
 	{0, 0, 0, 0, 106, 0, 162, 194, 215, 246, 262, 268, 273}, /* SGI */
 	{0, 0, 0, 0, 134, 0, 249, 346, 431, 574, 685, 732, 775}, /* AGG */
 	{0, 0, 0, 0, 148, 0, 272, 376, 465, 614, 727, 775, 818}, /* AGG+SGI */
 };
 
-static s32 expected_tpt_mimo3_40MHz[4][IWL_RATE_COUNT] = {
+static const u16 expected_tpt_mimo3_40MHz[4][IWL_RATE_COUNT] = {
 	{0, 0, 0, 0, 152, 0, 211, 239, 255, 279,  290,  294,  297}, /* Norm */
 	{0, 0, 0, 0, 160, 0, 219, 245, 261, 284,  294,  297,  300}, /* SGI */
 	{0, 0, 0, 0, 254, 0, 443, 584, 695, 868,  984, 1030, 1070}, /* AGG */
@@ -1111,7 +1111,7 @@ static void rs_set_expected_tpt_table(struct iwl_lq_sta *lq_sta,
 				      struct iwl_scale_tbl_info *tbl)
 {
 	/* Used to choose among HT tables */
-	s32 (*ht_tbl_pointer)[IWL_RATE_COUNT];
+	const u16 (*ht_tbl_pointer)[IWL_RATE_COUNT];
 
 	/* Check for invalid LQ type */
 	if (WARN_ON_ONCE(!is_legacy(tbl->lq_type) && !is_Ht(tbl->lq_type))) {
@@ -1173,9 +1173,8 @@ static s32 rs_get_best_rate(struct iwl_priv *priv,
 	    &(lq_sta->lq_info[lq_sta->active_tbl]);
 	s32 active_sr = active_tbl->win[index].success_ratio;
 	s32 active_tpt = active_tbl->expected_tpt[index];
-
 	/* expected "search" throughput */
-	s32 *tpt_tbl = tbl->expected_tpt;
+	const u16 *tpt_tbl = tbl->expected_tpt;
 
 	s32 new_rate, high, low, start_hi;
 	u16 high_low;
diff --git a/drivers/net/wireless/iwlwifi/dvm/rs.h b/drivers/net/wireless/iwlwifi/dvm/rs.h
index bdd5644a400b..f6bd25cad203 100644
--- a/drivers/net/wireless/iwlwifi/dvm/rs.h
+++ b/drivers/net/wireless/iwlwifi/dvm/rs.h
@@ -315,7 +315,7 @@ struct iwl_scale_tbl_info {
 	u8 is_dup;	/* 1 = duplicated data streams */
 	u8 action;	/* change modulation; IWL_[LEGACY/SISO/MIMO]_SWITCH_* */
 	u8 max_search;	/* maximun number of tables we can search */
-	s32 *expected_tpt;	/* throughput metrics; expected_tpt_G, etc. */
+	const u16 *expected_tpt;	/* throughput metrics; expected_tpt_G, etc. */
 	u32 current_rate;  /* rate_n_flags, uCode API format */
 	struct iwl_rate_scale_data win[IWL_RATE_COUNT]; /* rate histories */
 };
diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.c b/drivers/net/wireless/iwlwifi/mvm/rs.c
index 6abf74e1351f..9ec8eca21f50 100644
--- a/drivers/net/wireless/iwlwifi/mvm/rs.c
+++ b/drivers/net/wireless/iwlwifi/mvm/rs.c
@@ -380,49 +380,49 @@ static void rs_stay_in_table(struct iwl_lq_sta *lq_sta, bool force_search);
  * (2.4 GHz) band.
  */
 
-static s32 expected_tpt_legacy[IWL_RATE_COUNT] = {
+static const u16 expected_tpt_legacy[IWL_RATE_COUNT] = {
 	7, 13, 35, 58, 40, 57, 72, 98, 121, 154, 177, 186, 0, 0, 0
 };
 
 /* Expected TpT tables. 4 indexes:
  * 0 - NGI, 1 - SGI, 2 - AGG+NGI, 3 - AGG+SGI
  */
-static s32 expected_tpt_siso_20MHz[4][IWL_RATE_COUNT] = {
+static const u16 expected_tpt_siso_20MHz[4][IWL_RATE_COUNT] = {
 	{0, 0, 0, 0, 42, 0,  76, 102, 124, 159, 183, 193, 202, 216, 0},
 	{0, 0, 0, 0, 46, 0,  82, 110, 132, 168, 192, 202, 210, 225, 0},
 	{0, 0, 0, 0, 49, 0,  97, 145, 192, 285, 375, 420, 464, 551, 0},
 	{0, 0, 0, 0, 54, 0, 108, 160, 213, 315, 415, 465, 513, 608, 0},
 };
 
-static s32 expected_tpt_siso_40MHz[4][IWL_RATE_COUNT] = {
+static const u16 expected_tpt_siso_40MHz[4][IWL_RATE_COUNT] = {
 	{0, 0, 0, 0,  77, 0, 127, 160, 184, 220, 242, 250,  257,  269,  275},
 	{0, 0, 0, 0,  83, 0, 135, 169, 193, 229, 250, 257,  264,  275,  280},
 	{0, 0, 0, 0, 101, 0, 199, 295, 389, 570, 744, 828,  911, 1070, 1173},
 	{0, 0, 0, 0, 112, 0, 220, 326, 429, 629, 819, 912, 1000, 1173, 1284},
 };
 
-static s32 expected_tpt_siso_80MHz[4][IWL_RATE_COUNT] = {
+static const u16 expected_tpt_siso_80MHz[4][IWL_RATE_COUNT] = {
 	{0, 0, 0, 0, 130, 0, 191, 223, 244,  273,  288,  294,  298,  305,  308},
 	{0, 0, 0, 0, 138, 0, 200, 231, 251,  279,  293,  298,  302,  308,  312},
 	{0, 0, 0, 0, 217, 0, 429, 634, 834, 1220, 1585, 1760, 1931, 2258, 2466},
 	{0, 0, 0, 0, 241, 0, 475, 701, 921, 1343, 1741, 1931, 2117, 2468, 2691},
 };
 
-static s32 expected_tpt_mimo2_20MHz[4][IWL_RATE_COUNT] = {
+static const u16 expected_tpt_mimo2_20MHz[4][IWL_RATE_COUNT] = {
 	{0, 0, 0, 0,  74, 0, 123, 155, 179, 213, 235, 243, 250,  261, 0},
 	{0, 0, 0, 0,  81, 0, 131, 164, 187, 221, 242, 250, 256,  267, 0},
 	{0, 0, 0, 0,  98, 0, 193, 286, 375, 550, 718, 799, 878, 1032, 0},
 	{0, 0, 0, 0, 109, 0, 214, 316, 414, 607, 790, 879, 965, 1132, 0},
 };
 
-static s32 expected_tpt_mimo2_40MHz[4][IWL_RATE_COUNT] = {
+static const u16 expected_tpt_mimo2_40MHz[4][IWL_RATE_COUNT] = {
 	{0, 0, 0, 0, 123, 0, 182, 214, 235,  264,  279,  285,  289,  296,  300},
 	{0, 0, 0, 0, 131, 0, 191, 222, 242,  270,  284,  289,  293,  300,  303},
 	{0, 0, 0, 0, 200, 0, 390, 571, 741, 1067, 1365, 1505, 1640, 1894, 2053},
 	{0, 0, 0, 0, 221, 0, 430, 630, 816, 1169, 1490, 1641, 1784, 2053, 2221},
 };
 
-static s32 expected_tpt_mimo2_80MHz[4][IWL_RATE_COUNT] = {
+static const u16 expected_tpt_mimo2_80MHz[4][IWL_RATE_COUNT] = {
 	{0, 0, 0, 0, 182, 0, 240,  264,  278,  299,  308,  311,  313,  317,  319},
 	{0, 0, 0, 0, 190, 0, 247,  269,  282,  302,  310,  313,  315,  319,  320},
 	{0, 0, 0, 0, 428, 0, 833, 1215, 1577, 2254, 2863, 3147, 3418, 3913, 4219},
@@ -1169,12 +1169,12 @@ static void rs_set_stay_in_table(struct iwl_mvm *mvm, u8 is_legacy,
 	lq_sta->visited_columns = 0;
 }
 
-static s32 *rs_get_expected_tpt_table(struct iwl_lq_sta *lq_sta,
+static const u16 *rs_get_expected_tpt_table(struct iwl_lq_sta *lq_sta,
 				      const struct rs_tx_column *column,
 				      u32 bw)
 {
 	/* Used to choose among HT tables */
-	s32 (*ht_tbl_pointer)[IWL_RATE_COUNT];
+	const u16 (*ht_tbl_pointer)[IWL_RATE_COUNT];
 
 	if (WARN_ON_ONCE(column->mode != RS_LEGACY &&
 			 column->mode != RS_SISO &&
@@ -1262,9 +1262,8 @@ static s32 rs_get_best_rate(struct iwl_mvm *mvm,
 	    &(lq_sta->lq_info[lq_sta->active_tbl]);
 	s32 active_sr = active_tbl->win[index].success_ratio;
 	s32 active_tpt = active_tbl->expected_tpt[index];
-
 	/* expected "search" throughput */
-	s32 *tpt_tbl = tbl->expected_tpt;
+	const u16 *tpt_tbl = tbl->expected_tpt;
 
 	s32 new_rate, high, low, start_hi;
 	u16 high_low;
@@ -1479,7 +1478,7 @@ static enum rs_column rs_get_next_column(struct iwl_mvm *mvm,
 	const struct rs_tx_column *next_col;
 	allow_column_func_t allow_func;
 	u8 valid_ants = iwl_fw_valid_tx_ant(mvm->fw);
-	s32 *expected_tpt_tbl;
+	const u16 *expected_tpt_tbl;
 	s32 tpt, max_expected_tpt;
 
 	for (i = 0; i < MAX_NEXT_COLUMNS; i++) {
diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.h b/drivers/net/wireless/iwlwifi/mvm/rs.h
index 7bc6404f6986..3332b396011e 100644
--- a/drivers/net/wireless/iwlwifi/mvm/rs.h
+++ b/drivers/net/wireless/iwlwifi/mvm/rs.h
@@ -277,7 +277,7 @@ enum rs_column {
 struct iwl_scale_tbl_info {
 	struct rs_rate rate;
 	enum rs_column column;
-	s32 *expected_tpt;	/* throughput metrics; expected_tpt_G, etc. */
+	const u16 *expected_tpt;	/* throughput metrics; expected_tpt_G, etc. */
 	struct iwl_rate_scale_data win[IWL_RATE_COUNT]; /* rate histories */
 };
 
-- 
cgit v1.2.2


From 2284b951fbad502680a0e1ba35a8efc965d6b6ce Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Wed, 15 Jan 2014 16:57:03 +0200
Subject: iwlwifi: mvm: add vif type in debugfs output

Add the vif type when we print the mac params.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c b/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c
index 919470954e5b..f6bed07d3d46 100644
--- a/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c
+++ b/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c
@@ -225,6 +225,29 @@ static ssize_t iwl_dbgfs_mac_params_read(struct file *file,
 
 	ap_sta_id = mvmvif->ap_sta_id;
 
+	switch (ieee80211_vif_type_p2p(vif)) {
+	case NL80211_IFTYPE_ADHOC:
+		pos += scnprintf(buf+pos, bufsz-pos, "type: ibss\n");
+		break;
+	case NL80211_IFTYPE_STATION:
+		pos += scnprintf(buf+pos, bufsz-pos, "type: bss\n");
+		break;
+	case NL80211_IFTYPE_AP:
+		pos += scnprintf(buf+pos, bufsz-pos, "type: ap\n");
+		break;
+	case NL80211_IFTYPE_P2P_CLIENT:
+		pos += scnprintf(buf+pos, bufsz-pos, "type: p2p client\n");
+		break;
+	case NL80211_IFTYPE_P2P_GO:
+		pos += scnprintf(buf+pos, bufsz-pos, "type: p2p go\n");
+		break;
+	case NL80211_IFTYPE_P2P_DEVICE:
+		pos += scnprintf(buf+pos, bufsz-pos, "type: p2p dev\n");
+		break;
+	default:
+		break;
+	}
+
 	pos += scnprintf(buf+pos, bufsz-pos, "mac id/color: %d / %d\n",
 			 mvmvif->id, mvmvif->color);
 	pos += scnprintf(buf+pos, bufsz-pos, "bssid: %pM\n",
-- 
cgit v1.2.2


From 2d675e523740d20fea8b8b76b4163aa18811c288 Mon Sep 17 00:00:00 2001
From: Ilan Peer <ilan.peer@intel.com>
Date: Sun, 19 Jan 2014 11:46:52 +0200
Subject: iwlwifi: mvm: add the quota remainder to a data binding

Currently the quota remainder was added to the first binding, although
it is possible that this was not a data binding (only the P2P_DEVICE
interface is part of the binding).

Fix this by adding the remainder to the first binding that was actually
allocated quota.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/quota.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/quota.c b/drivers/net/wireless/iwlwifi/mvm/quota.c
index 5691a8551146..f07ae483aa31 100644
--- a/drivers/net/wireless/iwlwifi/mvm/quota.c
+++ b/drivers/net/wireless/iwlwifi/mvm/quota.c
@@ -276,8 +276,13 @@ int iwl_mvm_update_quotas(struct iwl_mvm *mvm, struct ieee80211_vif *newvif)
 		idx++;
 	}
 
-	/* Give the remainder of the session to the first binding */
-	le32_add_cpu(&cmd.quotas[0].quota, quota_rem);
+	/* Give the remainder of the session to the first data binding */
+	for (i = 0; i < MAX_BINDINGS; i++) {
+		if (le32_to_cpu(cmd.quotas[i].quota) != 0) {
+			le32_add_cpu(&cmd.quotas[i].quota, quota_rem);
+			break;
+		}
+	}
 
 	iwl_mvm_adjust_quota_for_noa(mvm, &cmd);
 
-- 
cgit v1.2.2


From 7b4fe06c25a1a37ba393e791012f3b01c70e674a Mon Sep 17 00:00:00 2001
From: Ilan Peer <ilan.peer@intel.com>
Date: Sun, 19 Jan 2014 11:38:39 +0200
Subject: iwlwifi: mvm: fix quota allocation

Divide the maximal quota between all the data interfaces even in the
case of a single low latency binding without any other non low latency
interfaces, so that afterwards the quota allocation (which considers
the number of data interfaces) will be correct.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/quota.c | 36 +++++++++++++++++++++++++-------
 1 file changed, 28 insertions(+), 8 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/quota.c b/drivers/net/wireless/iwlwifi/mvm/quota.c
index f07ae483aa31..06d8429be1fb 100644
--- a/drivers/net/wireless/iwlwifi/mvm/quota.c
+++ b/drivers/net/wireless/iwlwifi/mvm/quota.c
@@ -234,15 +234,24 @@ int iwl_mvm_update_quotas(struct iwl_mvm *mvm, struct ieee80211_vif *newvif)
 				break;
 			}
 		}
-		if (n_non_lowlat) {
-			quota = (QUOTA_100 - QUOTA_LOWLAT_MIN) / n_non_lowlat;
-			quota_rem = QUOTA_100 - n_non_lowlat * quota -
-				    QUOTA_LOWLAT_MIN;
-		} else {
-			quota = QUOTA_100;
-			quota_rem = 0;
-		}
+	}
+
+	if (data.n_low_latency_bindings == 1 && n_non_lowlat) {
+		/*
+		 * Reserve quota for the low latency binding in case that
+		 * there are several data bindings but only a single
+		 * low latency one. Split the rest of the quota equally
+		 * between the other data interfaces.
+		 */
+		quota = (QUOTA_100 - QUOTA_LOWLAT_MIN) / n_non_lowlat;
+		quota_rem = QUOTA_100 - n_non_lowlat * quota -
+			    QUOTA_LOWLAT_MIN;
 	} else if (num_active_macs) {
+		/*
+		 * There are 0 or more than 1 low latency bindings, or all the
+		 * data interfaces belong to the single low latency binding.
+		 * Split the quota equally between the data interfaces.
+		 */
 		quota = QUOTA_100 / num_active_macs;
 		quota_rem = QUOTA_100 % num_active_macs;
 	} else {
@@ -262,11 +271,22 @@ int iwl_mvm_update_quotas(struct iwl_mvm *mvm, struct ieee80211_vif *newvif)
 			cmd.quotas[idx].quota = cpu_to_le32(0);
 		else if (data.n_low_latency_bindings == 1 && n_non_lowlat &&
 			 data.low_latency[i])
+			/*
+			 * There is more than one binding, but only one of the
+			 * bindings is in low latency. For this case, allocate
+			 * the minimal required quota for the low latency
+			 * binding.
+			 */
 			cmd.quotas[idx].quota = cpu_to_le32(QUOTA_LOWLAT_MIN);
+
 		else
 			cmd.quotas[idx].quota =
 				cpu_to_le32(quota * data.n_interfaces[i]);
 
+		WARN_ONCE(le32_to_cpu(cmd.quotas[idx].quota) > QUOTA_100,
+			  "Binding=%d, quota=%u > max=%u\n",
+			  idx, le32_to_cpu(cmd.quotas[idx].quota), QUOTA_100);
+
 		if (data.n_interfaces[i] && !data.low_latency[i])
 			cmd.quotas[idx].max_duration =
 				cpu_to_le32(ll_max_duration);
-- 
cgit v1.2.2


From bcb079a14d75b6e1ed762b194fe04dc5d3f96d7e Mon Sep 17 00:00:00 2001
From: Ido Yariv <ido@wizery.com>
Date: Thu, 16 Jan 2014 21:00:11 -0500
Subject: iwlwifi: pcie: retrieve and parse ACPI power limitations

Some platforms may have power limitations on PCIe cards connected to
specific root ports.

This information is encoded as part of the ACPI tables, for instance:
<snip>
           Name (SPLX, Package (0x02)
           {
               Zero,
               Package (0x03)
               {
                   0x07,
                   0x00000500,
                   0x80000000
               }
           })

           Method (SPLC, 0, Serialized)
           {
               Return (SPLX)
           }
</snip>

The structure returned contains the domain type, the default power
limitation and the default time window (reserved for future use).

Upon PCI probing, call the relevant ACPI method, parse the returned
structure, and save the power limitation.

Signed-off-by: Ido Yariv <idox.yariv@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-trans.h |  3 ++
 drivers/net/wireless/iwlwifi/pcie/drv.c  | 78 ++++++++++++++++++++++++++++++++
 2 files changed, 81 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h
index 1f065cf4a4ba..a350abe50b7e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-trans.h
+++ b/drivers/net/wireless/iwlwifi/iwl-trans.h
@@ -523,6 +523,7 @@ enum iwl_trans_state {
  *	starting the firmware, used for tracing
  * @rx_mpdu_cmd_hdr_size: used for tracing, amount of data before the
  *	start of the 802.11 header in the @rx_mpdu_cmd
+ * @dflt_pwr_limit: default power limit fetched from the platform (ACPI)
  */
 struct iwl_trans {
 	const struct iwl_trans_ops *ops;
@@ -551,6 +552,8 @@ struct iwl_trans {
 	struct lockdep_map sync_cmd_lockdep_map;
 #endif
 
+	u64 dflt_pwr_limit;
+
 	/* pointer to trans specific struct */
 	/*Ensure that this pointer will always be aligned to sizeof pointer */
 	char trans_specific[0] __aligned(sizeof(void *));
diff --git a/drivers/net/wireless/iwlwifi/pcie/drv.c b/drivers/net/wireless/iwlwifi/pcie/drv.c
index 4b3a49b11d48..85779390c444 100644
--- a/drivers/net/wireless/iwlwifi/pcie/drv.c
+++ b/drivers/net/wireless/iwlwifi/pcie/drv.c
@@ -66,6 +66,7 @@
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/pci-aspm.h>
+#include <linux/acpi.h>
 
 #include "iwl-trans.h"
 #include "iwl-drv.h"
@@ -395,6 +396,81 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = {
 };
 MODULE_DEVICE_TABLE(pci, iwl_hw_card_ids);
 
+#ifdef CONFIG_ACPI
+#define SPL_METHOD		"SPLC"
+#define SPL_DOMAINTYPE_MODULE	BIT(0)
+#define SPL_DOMAINTYPE_WIFI	BIT(1)
+#define SPL_DOMAINTYPE_WIGIG	BIT(2)
+#define SPL_DOMAINTYPE_RFEM	BIT(3)
+
+static u64 splx_get_pwr_limit(struct iwl_trans *trans, union acpi_object *splx)
+{
+	union acpi_object *limits, *domain_type, *power_limit;
+
+	if (splx->type != ACPI_TYPE_PACKAGE ||
+	    splx->package.count != 2 ||
+	    splx->package.elements[0].type != ACPI_TYPE_INTEGER ||
+	    splx->package.elements[0].integer.value != 0) {
+		IWL_ERR(trans, "Unsupported splx structure");
+		return 0;
+	}
+
+	limits = &splx->package.elements[1];
+	if (limits->type != ACPI_TYPE_PACKAGE ||
+	    limits->package.count < 2 ||
+	    limits->package.elements[0].type != ACPI_TYPE_INTEGER ||
+	    limits->package.elements[1].type != ACPI_TYPE_INTEGER) {
+		IWL_ERR(trans, "Invalid limits element");
+		return 0;
+	}
+
+	domain_type = &limits->package.elements[0];
+	power_limit = &limits->package.elements[1];
+	if (!(domain_type->integer.value & SPL_DOMAINTYPE_WIFI)) {
+		IWL_DEBUG_INFO(trans, "WiFi power is not limited");
+		return 0;
+	}
+
+	return power_limit->integer.value;
+}
+
+static void set_dflt_pwr_limit(struct iwl_trans *trans, struct pci_dev *pdev)
+{
+	acpi_handle pxsx_handle;
+	acpi_handle handle;
+	struct acpi_buffer splx = {ACPI_ALLOCATE_BUFFER, NULL};
+	acpi_status status;
+
+	pxsx_handle = ACPI_HANDLE(&pdev->dev);
+	if (!pxsx_handle) {
+		IWL_ERR(trans, "Could not retrieve root port ACPI handle");
+		return;
+	}
+
+	/* Get the method's handle */
+	status = acpi_get_handle(pxsx_handle, (acpi_string)SPL_METHOD, &handle);
+	if (ACPI_FAILURE(status)) {
+		IWL_DEBUG_INFO(trans, "SPL method not found");
+		return;
+	}
+
+	/* Call SPLC with no arguments */
+	status = acpi_evaluate_object(handle, NULL, NULL, &splx);
+	if (ACPI_FAILURE(status)) {
+		IWL_ERR(trans, "SPLC invocation failed (0x%x)", status);
+		return;
+	}
+
+	trans->dflt_pwr_limit = splx_get_pwr_limit(trans, splx.pointer);
+	IWL_DEBUG_INFO(trans, "Default power limit set to %lld",
+		       trans->dflt_pwr_limit);
+	kfree(splx.pointer);
+}
+
+#else /* CONFIG_ACPI */
+static void set_dflt_pwr_limit(struct iwl_trans *trans, struct pci_dev *pdev) {}
+#endif
+
 /* PCI registers */
 #define PCI_CFG_RETRY_TIMEOUT	0x041
 
@@ -419,6 +495,8 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto out_free_trans;
 	}
 
+	set_dflt_pwr_limit(iwl_trans, pdev);
+
 	/* register transport layer debugfs here */
 	ret = iwl_trans_dbgfs_register(iwl_trans, iwl_trans->dbgfs_dir);
 	if (ret)
-- 
cgit v1.2.2


From 0c0e2c71b4da1818693acd73d49c4971283c8e72 Mon Sep 17 00:00:00 2001
From: Ido Yariv <ido@wizery.com>
Date: Thu, 16 Jan 2014 21:12:02 -0500
Subject: iwlwifi: mvm: handle platform PCIe power limitation

The tx backoff settings used by the thermal throttling mechanism can
also be used for enforcing a limit on the power consumption of the module.

Handle the platform PCIe power limitation by translating the limit
(measured in mw) to its respective tx backoff value. The translation is
module specific.

The resulting tx backoff value is sent to the ucode, and also serves as the
minimal backoff value that can be set by the thermal throttling mechanism.

Signed-off-by: Ido Yariv <idox.yariv@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-config.h | 11 +++++++++++
 drivers/net/wireless/iwlwifi/mvm/fw.c     |  3 +++
 drivers/net/wireless/iwlwifi/mvm/mvm.h    |  5 ++++-
 drivers/net/wireless/iwlwifi/mvm/ops.c    | 21 ++++++++++++++++++++-
 drivers/net/wireless/iwlwifi/mvm/tt.c     |  7 +++++--
 5 files changed, 43 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-config.h b/drivers/net/wireless/iwlwifi/iwl-config.h
index df7d409023b6..456fccaf1cbb 100644
--- a/drivers/net/wireless/iwlwifi/iwl-config.h
+++ b/drivers/net/wireless/iwlwifi/iwl-config.h
@@ -193,6 +193,15 @@ struct iwl_eeprom_params {
 	bool enhanced_txpower;
 };
 
+/* Tx-backoff power threshold
+ * @pwr: The power limit in mw
+ * @backoff: The tx-backoff in uSec
+ */
+struct iwl_pwr_tx_backoff {
+	u32 pwr;
+	u32 backoff;
+};
+
 /**
  * struct iwl_cfg
  * @name: Offical name of the device
@@ -219,6 +228,7 @@ struct iwl_eeprom_params {
  * @host_interrupt_operation_mode: device needs host interrupt operation
  *	mode set
  * @nvm_hw_section_num: the ID of the HW NVM section
+ * @pwr_tx_backoffs: translation table between power limits and backoffs
  *
  * We enable the driver to be backward compatible wrt. hardware features.
  * API differences in uCode shouldn't be handled here but through TLVs
@@ -250,6 +260,7 @@ struct iwl_cfg {
 	const bool host_interrupt_operation_mode;
 	bool high_temp;
 	u8   nvm_hw_section_num;
+	const struct iwl_pwr_tx_backoff *pwr_tx_backoffs;
 };
 
 /*
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw.c b/drivers/net/wireless/iwlwifi/mvm/fw.c
index c03d39541f9e..5798f1ae7482 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw.c
+++ b/drivers/net/wireless/iwlwifi/mvm/fw.c
@@ -439,6 +439,9 @@ int iwl_mvm_up(struct iwl_mvm *mvm)
 			goto error;
 	}
 
+	/* Initialize tx backoffs to the minimal possible */
+	iwl_mvm_tt_tx_backoff(mvm, 0);
+
 	ret = iwl_mvm_power_update_device_mode(mvm);
 	if (ret)
 		goto error;
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index 80052d9c28ef..3202a6ee7e96 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -418,6 +418,7 @@ struct iwl_tt_params {
  * @ct_kill_exit: worker to exit thermal kill
  * @dynamic_smps: Is thermal throttling enabled dynamic_smps?
  * @tx_backoff: The current thremal throttling tx backoff in uSec.
+ * @min_backoff: The minimal tx backoff due to power restrictions
  * @params: Parameters to configure the thermal throttling algorithm.
  * @throttle: Is thermal throttling is active?
  */
@@ -425,6 +426,7 @@ struct iwl_mvm_tt_mgmt {
 	struct delayed_work ct_kill_exit;
 	bool dynamic_smps;
 	u32 tx_backoff;
+	u32 min_backoff;
 	const struct iwl_tt_params *params;
 	bool throttle;
 };
@@ -947,8 +949,9 @@ static inline bool iwl_mvm_vif_low_latency(struct iwl_mvm_vif *mvmvif)
 }
 
 /* Thermal management and CT-kill */
+void iwl_mvm_tt_tx_backoff(struct iwl_mvm *mvm, u32 backoff);
 void iwl_mvm_tt_handler(struct iwl_mvm *mvm);
-void iwl_mvm_tt_initialize(struct iwl_mvm *mvm);
+void iwl_mvm_tt_initialize(struct iwl_mvm *mvm, u32 min_backoff);
 void iwl_mvm_tt_exit(struct iwl_mvm *mvm);
 void iwl_mvm_set_hw_ctkill_state(struct iwl_mvm *mvm, bool state);
 
diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c
index 24afbd60c02e..cf33a128ef05 100644
--- a/drivers/net/wireless/iwlwifi/mvm/ops.c
+++ b/drivers/net/wireless/iwlwifi/mvm/ops.c
@@ -326,6 +326,23 @@ static const char *iwl_mvm_cmd_strings[REPLY_MAX] = {
 /* this forward declaration can avoid to export the function */
 static void iwl_mvm_async_handlers_wk(struct work_struct *wk);
 
+static u32 calc_min_backoff(struct iwl_trans *trans, const struct iwl_cfg *cfg)
+{
+	const struct iwl_pwr_tx_backoff *pwr_tx_backoff = cfg->pwr_tx_backoffs;
+
+	if (!pwr_tx_backoff)
+		return 0;
+
+	while (pwr_tx_backoff->pwr) {
+		if (trans->dflt_pwr_limit >= pwr_tx_backoff->pwr)
+			return pwr_tx_backoff->backoff;
+
+		pwr_tx_backoff++;
+	}
+
+	return 0;
+}
+
 static struct iwl_op_mode *
 iwl_op_mode_mvm_start(struct iwl_trans *trans, const struct iwl_cfg *cfg,
 		      const struct iwl_fw *fw, struct dentry *dbgfs_dir)
@@ -338,6 +355,7 @@ iwl_op_mode_mvm_start(struct iwl_trans *trans, const struct iwl_cfg *cfg,
 		TX_CMD,
 	};
 	int err, scan_size;
+	u32 min_backoff;
 
 	/*
 	 * We use IWL_MVM_STATION_COUNT to check the validity of the station
@@ -433,7 +451,8 @@ iwl_op_mode_mvm_start(struct iwl_trans *trans, const struct iwl_cfg *cfg,
 	IWL_INFO(mvm, "Detected %s, REV=0x%X\n",
 		 mvm->cfg->name, mvm->trans->hw_rev);
 
-	iwl_mvm_tt_initialize(mvm);
+	min_backoff = calc_min_backoff(trans, cfg);
+	iwl_mvm_tt_initialize(mvm, min_backoff);
 
 	/*
 	 * If the NVM exists in an external file,
diff --git a/drivers/net/wireless/iwlwifi/mvm/tt.c b/drivers/net/wireless/iwlwifi/mvm/tt.c
index 3afa6b6bf835..7a99fa361954 100644
--- a/drivers/net/wireless/iwlwifi/mvm/tt.c
+++ b/drivers/net/wireless/iwlwifi/mvm/tt.c
@@ -403,7 +403,7 @@ static void iwl_mvm_tt_tx_protection(struct iwl_mvm *mvm, bool enable)
 	}
 }
 
-static void iwl_mvm_tt_tx_backoff(struct iwl_mvm *mvm, u32 backoff)
+void iwl_mvm_tt_tx_backoff(struct iwl_mvm *mvm, u32 backoff)
 {
 	struct iwl_host_cmd cmd = {
 		.id = REPLY_THERMAL_MNG_BACKOFF,
@@ -412,6 +412,8 @@ static void iwl_mvm_tt_tx_backoff(struct iwl_mvm *mvm, u32 backoff)
 		.flags = CMD_SYNC,
 	};
 
+	backoff = max(backoff, mvm->thermal_throttle.min_backoff);
+
 	if (iwl_mvm_send_cmd(mvm, &cmd) == 0) {
 		IWL_DEBUG_TEMP(mvm, "Set Thermal Tx backoff to: %u\n",
 			       backoff);
@@ -534,7 +536,7 @@ static const struct iwl_tt_params iwl7000_high_temp_tt_params = {
 	.support_tx_backoff = true,
 };
 
-void iwl_mvm_tt_initialize(struct iwl_mvm *mvm)
+void iwl_mvm_tt_initialize(struct iwl_mvm *mvm, u32 min_backoff)
 {
 	struct iwl_mvm_tt_mgmt *tt = &mvm->thermal_throttle;
 
@@ -546,6 +548,7 @@ void iwl_mvm_tt_initialize(struct iwl_mvm *mvm)
 		tt->params = &iwl7000_tt_params;
 
 	tt->throttle = false;
+	tt->min_backoff = min_backoff;
 	INIT_DELAYED_WORK(&tt->ct_kill_exit, check_exit_ctkill);
 }
 
-- 
cgit v1.2.2


From 8e0dc2068b902308ff2059c455c8efe1912ccd0f Mon Sep 17 00:00:00 2001
From: Ido Yariv <ido@wizery.com>
Date: Thu, 16 Jan 2014 21:13:47 -0500
Subject: iwlwifi: 7265: add power limit/tx backoff translation table

Signed-off-by: Ido Yariv <idox.yariv@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-7000.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-7000.c b/drivers/net/wireless/iwlwifi/iwl-7000.c
index a43e4d1c5f6a..fbd262ffa497 100644
--- a/drivers/net/wireless/iwlwifi/iwl-7000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-7000.c
@@ -197,6 +197,17 @@ const struct iwl_cfg iwl3160_n_cfg = {
 	.host_interrupt_operation_mode = true,
 };
 
+static const struct iwl_pwr_tx_backoff iwl7265_pwr_tx_backoffs[] = {
+	{.pwr = 1600, .backoff = 0},
+	{.pwr = 1300, .backoff = 467},
+	{.pwr = 900,  .backoff = 1900},
+	{.pwr = 800, .backoff = 2630},
+	{.pwr = 700, .backoff = 3720},
+	{.pwr = 600, .backoff = 5550},
+	{.pwr = 500, .backoff = 9350},
+	{0},
+};
+
 const struct iwl_cfg iwl7265_2ac_cfg = {
 	.name = "Intel(R) Dual Band Wireless AC 7265",
 	.fw_name_pre = IWL7265_FW_PRE,
@@ -204,6 +215,7 @@ const struct iwl_cfg iwl7265_2ac_cfg = {
 	.ht_params = &iwl7000_ht_params,
 	.nvm_ver = IWL7265_NVM_VERSION,
 	.nvm_calib_ver = IWL7265_TX_POWER_VERSION,
+	.pwr_tx_backoffs = iwl7265_pwr_tx_backoffs,
 };
 
 const struct iwl_cfg iwl7265_2n_cfg = {
@@ -213,6 +225,7 @@ const struct iwl_cfg iwl7265_2n_cfg = {
 	.ht_params = &iwl7000_ht_params,
 	.nvm_ver = IWL7265_NVM_VERSION,
 	.nvm_calib_ver = IWL7265_TX_POWER_VERSION,
+	.pwr_tx_backoffs = iwl7265_pwr_tx_backoffs,
 };
 
 const struct iwl_cfg iwl7265_n_cfg = {
@@ -222,6 +235,7 @@ const struct iwl_cfg iwl7265_n_cfg = {
 	.ht_params = &iwl7000_ht_params,
 	.nvm_ver = IWL7265_NVM_VERSION,
 	.nvm_calib_ver = IWL7265_TX_POWER_VERSION,
+	.pwr_tx_backoffs = iwl7265_pwr_tx_backoffs,
 };
 
 MODULE_FIRMWARE(IWL7260_MODULE_FIRMWARE(IWL7260_UCODE_API_OK));
-- 
cgit v1.2.2


From 440c411d6ae9771c62e2b44ee94a80168f86077f Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Thu, 21 Nov 2013 12:28:17 +0200
Subject: iwlwifi: add D0i3 references boiler plate

D0i3 is bus power saving feature. It involves the
firmware - the driver needs to send a list of commands
to the firmware before entering this state. Wake up from
d0i3 also requires a few commands to the firmware.

The trigger to enter D0i3 is an idle timeout that will be
implemented later and will most probably rely on RUNTIME_PM
infrastructure.

In order to prevent entrance to D0i3 in critical flows, we
implement here a reference infrastructure. When a ref is
taken, we can't enter D0i3.

PCIe does't support D0i3.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-config.h |  2 ++
 drivers/net/wireless/iwlwifi/iwl-trans.h  | 19 +++++++++++++++++++
 2 files changed, 21 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-config.h b/drivers/net/wireless/iwlwifi/iwl-config.h
index 456fccaf1cbb..2ce89d837194 100644
--- a/drivers/net/wireless/iwlwifi/iwl-config.h
+++ b/drivers/net/wireless/iwlwifi/iwl-config.h
@@ -227,6 +227,7 @@ struct iwl_pwr_tx_backoff {
  * @high_temp: Is this NIC is designated to be in high temperature.
  * @host_interrupt_operation_mode: device needs host interrupt operation
  *	mode set
+ * @d0i3: device uses d0i3 instead of d3
  * @nvm_hw_section_num: the ID of the HW NVM section
  * @pwr_tx_backoffs: translation table between power limits and backoffs
  *
@@ -259,6 +260,7 @@ struct iwl_cfg {
 	const bool internal_wimax_coex;
 	const bool host_interrupt_operation_mode;
 	bool high_temp;
+	bool d0i3;
 	u8   nvm_hw_section_num;
 	const struct iwl_pwr_tx_backoff *pwr_tx_backoffs;
 };
diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h
index a350abe50b7e..1b2ac31d7445 100644
--- a/drivers/net/wireless/iwlwifi/iwl-trans.h
+++ b/drivers/net/wireless/iwlwifi/iwl-trans.h
@@ -443,6 +443,11 @@ struct iwl_trans;
  * @release_nic_access: let the NIC go to sleep. The "flags" parameter
  *	must be the same one that was sent before to the grab_nic_access.
  * @set_bits_mask - set SRAM register according to value and mask.
+ * @ref: grab a reference to the transport/FW layers, disallowing
+ *	certain low power states
+ * @unref: release a reference previously taken with @ref. Note that
+ *	initially the reference count is 1, making an initial @unref
+ *	necessary to allow low power states.
  */
 struct iwl_trans_ops {
 
@@ -489,6 +494,8 @@ struct iwl_trans_ops {
 				   unsigned long *flags);
 	void (*set_bits_mask)(struct iwl_trans *trans, u32 reg, u32 mask,
 			      u32 value);
+	void (*ref)(struct iwl_trans *trans);
+	void (*unref)(struct iwl_trans *trans);
 };
 
 /**
@@ -630,6 +637,18 @@ static inline int iwl_trans_d3_resume(struct iwl_trans *trans,
 	return trans->ops->d3_resume(trans, status, test);
 }
 
+static inline void iwl_trans_ref(struct iwl_trans *trans)
+{
+	if (trans->ops->ref)
+		trans->ops->ref(trans);
+}
+
+static inline void iwl_trans_unref(struct iwl_trans *trans)
+{
+	if (trans->ops->unref)
+		trans->ops->unref(trans);
+}
+
 static inline int iwl_trans_send_cmd(struct iwl_trans *trans,
 				     struct iwl_host_cmd *cmd)
 {
-- 
cgit v1.2.2


From b3370d47f02eaeef52557259709589d81fdc573b Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Mon, 25 Nov 2013 15:20:16 +0200
Subject: iwlwifi: add enter/exit D0i3 ops

Add new enter_d0i3 and exit_d0i3 ops that
will be called by the transport on D0i3 enter/exit.

Each one of these ops will include the host commands
mentionned in the previous patch.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-debug.h   |  2 ++
 drivers/net/wireless/iwlwifi/iwl-op-mode.h | 22 ++++++++++++++++++++++
 drivers/net/wireless/iwlwifi/mvm/ops.c     | 18 ++++++++++++++++++
 3 files changed, 42 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-debug.h b/drivers/net/wireless/iwlwifi/iwl-debug.h
index a75aac986a23..c8cbdbe15924 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debug.h
+++ b/drivers/net/wireless/iwlwifi/iwl-debug.h
@@ -126,6 +126,7 @@ do {                                            			\
 /* 0x00000F00 - 0x00000100 */
 #define IWL_DL_POWER		0x00000100
 #define IWL_DL_TEMP		0x00000200
+#define IWL_DL_RPM		0x00000400
 #define IWL_DL_SCAN		0x00000800
 /* 0x0000F000 - 0x00001000 */
 #define IWL_DL_ASSOC		0x00001000
@@ -189,5 +190,6 @@ do {                                            			\
 #define IWL_DEBUG_RADIO(p, f, a...)	IWL_DEBUG(p, IWL_DL_RADIO, f, ## a)
 #define IWL_DEBUG_POWER(p, f, a...)	IWL_DEBUG(p, IWL_DL_POWER, f, ## a)
 #define IWL_DEBUG_11H(p, f, a...)	IWL_DEBUG(p, IWL_DL_11H, f, ## a)
+#define IWL_DEBUG_RPM(p, f, a...)	IWL_DEBUG(p, IWL_DL_RPM, f, ## a)
 
 #endif
diff --git a/drivers/net/wireless/iwlwifi/iwl-op-mode.h b/drivers/net/wireless/iwlwifi/iwl-op-mode.h
index b5be51f3cd3d..f83b244b01ef 100644
--- a/drivers/net/wireless/iwlwifi/iwl-op-mode.h
+++ b/drivers/net/wireless/iwlwifi/iwl-op-mode.h
@@ -131,6 +131,8 @@ struct iwl_cfg;
  * @nic_config: configure NIC, called before firmware is started.
  *	May sleep
  * @wimax_active: invoked when WiMax becomes active. May sleep
+ * @enter_d0i3: configure the fw to enter d0i3. May sleep.
+ * @exit_d0i3: configure the fw to exit d0i3. May sleep.
  */
 struct iwl_op_mode_ops {
 	struct iwl_op_mode *(*start)(struct iwl_trans *trans,
@@ -148,6 +150,8 @@ struct iwl_op_mode_ops {
 	void (*cmd_queue_full)(struct iwl_op_mode *op_mode);
 	void (*nic_config)(struct iwl_op_mode *op_mode);
 	void (*wimax_active)(struct iwl_op_mode *op_mode);
+	int (*enter_d0i3)(struct iwl_op_mode *op_mode);
+	int (*exit_d0i3)(struct iwl_op_mode *op_mode);
 };
 
 int iwl_opmode_register(const char *name, const struct iwl_op_mode_ops *ops);
@@ -226,4 +230,22 @@ static inline void iwl_op_mode_wimax_active(struct iwl_op_mode *op_mode)
 	op_mode->ops->wimax_active(op_mode);
 }
 
+static inline int iwl_op_mode_enter_d0i3(struct iwl_op_mode *op_mode)
+{
+	might_sleep();
+
+	if (!op_mode->ops->enter_d0i3)
+		return 0;
+	return op_mode->ops->enter_d0i3(op_mode);
+}
+
+static inline int iwl_op_mode_exit_d0i3(struct iwl_op_mode *op_mode)
+{
+	might_sleep();
+
+	if (!op_mode->ops->exit_d0i3)
+		return 0;
+	return op_mode->ops->exit_d0i3(op_mode);
+}
+
 #endif /* __iwl_op_mode_h__ */
diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c
index cf33a128ef05..0f87bc3b38d2 100644
--- a/drivers/net/wireless/iwlwifi/mvm/ops.c
+++ b/drivers/net/wireless/iwlwifi/mvm/ops.c
@@ -812,6 +812,22 @@ static void iwl_mvm_cmd_queue_full(struct iwl_op_mode *op_mode)
 	iwl_mvm_nic_restart(mvm);
 }
 
+static int iwl_mvm_enter_d0i3(struct iwl_op_mode *op_mode)
+{
+	struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode);
+
+	IWL_DEBUG_RPM(mvm, "MVM entering D0i3\n");
+	return 0;
+}
+
+static int iwl_mvm_exit_d0i3(struct iwl_op_mode *op_mode)
+{
+	struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode);
+
+	IWL_DEBUG_RPM(mvm, "MVM exiting D0i3\n");
+	return 0;
+}
+
 static const struct iwl_op_mode_ops iwl_mvm_ops = {
 	.start = iwl_op_mode_mvm_start,
 	.stop = iwl_op_mode_mvm_stop,
@@ -823,4 +839,6 @@ static const struct iwl_op_mode_ops iwl_mvm_ops = {
 	.nic_error = iwl_mvm_nic_error,
 	.cmd_queue_full = iwl_mvm_cmd_queue_full,
 	.nic_config = iwl_mvm_nic_config,
+	.enter_d0i3 = iwl_mvm_enter_d0i3,
+	.exit_d0i3 = iwl_mvm_exit_d0i3,
 };
-- 
cgit v1.2.2


From 98ee7783062335984f5979cea6a08e79982a4061 Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Wed, 2 Oct 2013 16:58:09 +0300
Subject: iwlwifi: add very first D0i3 support

When the bus is in D0i3, we can't send regular commands to
the firmware. This means that we need to add a state to
remember what is our d0i3 state and make sure that only
d0i3 exit commands can be sent.
Add flags to CMD_ flags and transport status for this
purpose.

Commands with CMD_HIGH_PRIO set are queued at the head of
the command queue, behind other high priority commands.

Commands with CMD_SEND_IN_IDLE set can be sent while the
transport is idle (without taking rpm reference).

Commands with CMD_MAKE_TRANS_IDLE set indicate that command
completion should mark the transport as idle (and release
the bus).

Commands with CMD_WAKE_UP_TRANS set instruct the transport
to exit from idle when this command is completed.

The transport is marked as idle (STATUS_TRANS_IDLE) when
the FW enters D0i3 state. This bit is cleared when it
enters D0 state again.

Process only commands with CMD_SEND_IN_IDLE flag while the
transport is idle. Other enqueued commands will be
processed only later, right after exiting D0i3.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-trans.h  | 16 ++++++++++++++++
 drivers/net/wireless/iwlwifi/mvm/fw-api.h |  1 +
 drivers/net/wireless/iwlwifi/mvm/ops.c    | 15 +++++++++++++--
 3 files changed, 30 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h
index 1b2ac31d7445..7b19274b550f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-trans.h
+++ b/drivers/net/wireless/iwlwifi/iwl-trans.h
@@ -193,12 +193,23 @@ static inline u32 iwl_rx_packet_payload_len(const struct iwl_rx_packet *pkt)
  * @CMD_ASYNC: Return right away and don't wait for the response
  * @CMD_WANT_SKB: valid only with CMD_SYNC. The caller needs the buffer of the
  *	response. The caller needs to call iwl_free_resp when done.
+ * @CMD_HIGH_PRIO: The command is high priority - it goes to the front of the
+ *	command queue, but after other high priority commands. valid only
+ *	with CMD_ASYNC.
+ * @CMD_SEND_IN_IDLE: The command should be sent even when the trans is idle.
+ * @CMD_MAKE_TRANS_IDLE: The command response should mark the trans as idle.
+ * @CMD_WAKE_UP_TRANS: The command response should wake up the trans
+ *	(i.e. mark it as non-idle).
  */
 enum CMD_MODE {
 	CMD_SYNC		= 0,
 	CMD_ASYNC		= BIT(0),
 	CMD_WANT_SKB		= BIT(1),
 	CMD_SEND_IN_RFKILL	= BIT(2),
+	CMD_HIGH_PRIO		= BIT(3),
+	CMD_SEND_IN_IDLE	= BIT(4),
+	CMD_MAKE_TRANS_IDLE	= BIT(5),
+	CMD_WAKE_UP_TRANS	= BIT(6),
 };
 
 #define DEF_CMD_PAYLOAD_SIZE 320
@@ -335,6 +346,9 @@ enum iwl_d3_status {
  * @STATUS_INT_ENABLED: interrupts are enabled
  * @STATUS_RFKILL: the HW RFkill switch is in KILL position
  * @STATUS_FW_ERROR: the fw is in error state
+ * @STATUS_TRANS_GOING_IDLE: shutting down the trans, only special commands
+ *	are sent
+ * @STATUS_TRANS_IDLE: the trans is idle - general commands are not to be sent
  */
 enum iwl_trans_status {
 	STATUS_SYNC_HCMD_ACTIVE,
@@ -343,6 +357,8 @@ enum iwl_trans_status {
 	STATUS_INT_ENABLED,
 	STATUS_RFKILL,
 	STATUS_FW_ERROR,
+	STATUS_TRANS_GOING_IDLE,
+	STATUS_TRANS_IDLE,
 };
 
 /**
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/iwlwifi/mvm/fw-api.h
index 32844e3f5a85..3bf5f82658c5 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api.h
@@ -199,6 +199,7 @@ enum {
 	PROT_OFFLOAD_CONFIG_CMD = 0xd4,
 	OFFLOADS_QUERY_CMD = 0xd5,
 	REMOTE_WAKE_CONFIG_CMD = 0xd6,
+	D0I3_END_CMD = 0xed,
 
 	/* for WoWLAN in particular */
 	WOWLAN_PATTERNS = 0xe0,
diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c
index 0f87bc3b38d2..6e46b7c70473 100644
--- a/drivers/net/wireless/iwlwifi/mvm/ops.c
+++ b/drivers/net/wireless/iwlwifi/mvm/ops.c
@@ -291,6 +291,7 @@ static const char *iwl_mvm_cmd_strings[REPLY_MAX] = {
 	CMD(REDUCE_TX_POWER_CMD),
 	CMD(TX_ANT_CONFIGURATION_CMD),
 	CMD(D3_CONFIG_CMD),
+	CMD(D0I3_END_CMD),
 	CMD(PROT_OFFLOAD_CONFIG_CMD),
 	CMD(OFFLOADS_QUERY_CMD),
 	CMD(REMOTE_WAKE_CONFIG_CMD),
@@ -815,17 +816,27 @@ static void iwl_mvm_cmd_queue_full(struct iwl_op_mode *op_mode)
 static int iwl_mvm_enter_d0i3(struct iwl_op_mode *op_mode)
 {
 	struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode);
+	u32 flags = CMD_ASYNC | CMD_HIGH_PRIO | CMD_SEND_IN_IDLE;
+	struct iwl_d3_manager_config d3_cfg_cmd = {
+		.min_sleep_time = cpu_to_le32(1000),
+	};
 
 	IWL_DEBUG_RPM(mvm, "MVM entering D0i3\n");
-	return 0;
+
+	return iwl_mvm_send_cmd_pdu(mvm, D3_CONFIG_CMD,
+				    flags | CMD_MAKE_TRANS_IDLE,
+				    sizeof(d3_cfg_cmd), &d3_cfg_cmd);
 }
 
 static int iwl_mvm_exit_d0i3(struct iwl_op_mode *op_mode)
 {
 	struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode);
+	u32 flags = CMD_ASYNC | CMD_HIGH_PRIO | CMD_SEND_IN_IDLE |
+		    CMD_WAKE_UP_TRANS;
 
 	IWL_DEBUG_RPM(mvm, "MVM exiting D0i3\n");
-	return 0;
+
+	return iwl_mvm_send_cmd_pdu(mvm, D0I3_END_CMD, flags, 0, NULL);
 }
 
 static const struct iwl_op_mode_ops iwl_mvm_ops = {
-- 
cgit v1.2.2


From 3dd37d05240459da8445d358760db31564d926f3 Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Tue, 7 Jan 2014 14:00:24 +0200
Subject: iwlwifi: mvm: add D0i3 power configurations

Configure skip-over-dtim and beacon filtering on D0i3
enter/exit.

Since the D0i3 entry/exit commands require different
command flags (e.g. CMD_HIGH_PRIORITY), add a new parameter
to the functions being called, and make the current users
pass CMD_SYNC.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Alexander Bondar <alexander.bondar@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c  |   4 +-
 drivers/net/wireless/iwlwifi/mvm/fw-api-power.h |  33 ++++---
 drivers/net/wireless/iwlwifi/mvm/mac80211.c     |  13 +--
 drivers/net/wireless/iwlwifi/mvm/mvm.h          |  16 +++-
 drivers/net/wireless/iwlwifi/mvm/power.c        | 114 ++++++++++++++++++++----
 5 files changed, 139 insertions(+), 41 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c b/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c
index f6bed07d3d46..a46895eaa374 100644
--- a/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c
+++ b/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c
@@ -457,9 +457,9 @@ static ssize_t iwl_dbgfs_bf_params_write(struct ieee80211_vif *vif, char *buf,
 	mutex_lock(&mvm->mutex);
 	iwl_dbgfs_update_bf(vif, param, value);
 	if (param == MVM_DEBUGFS_BF_ENABLE_BEACON_FILTER && !value)
-		ret = iwl_mvm_disable_beacon_filter(mvm, vif);
+		ret = iwl_mvm_disable_beacon_filter(mvm, vif, CMD_SYNC);
 	else
-		ret = iwl_mvm_enable_beacon_filter(mvm, vif);
+		ret = iwl_mvm_enable_beacon_filter(mvm, vif, CMD_SYNC);
 	mutex_unlock(&mvm->mutex);
 
 	return ret ?: count;
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h
index 884c08725308..cbbcd8e284e4 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h
@@ -301,54 +301,65 @@ struct iwl_beacon_filter_cmd {
 
 /* Beacon filtering and beacon abort */
 #define IWL_BF_ENERGY_DELTA_DEFAULT 5
+#define IWL_BF_ENERGY_DELTA_D0I3 20
 #define IWL_BF_ENERGY_DELTA_MAX 255
 #define IWL_BF_ENERGY_DELTA_MIN 0
 
 #define IWL_BF_ROAMING_ENERGY_DELTA_DEFAULT 1
+#define IWL_BF_ROAMING_ENERGY_DELTA_D0I3 20
 #define IWL_BF_ROAMING_ENERGY_DELTA_MAX 255
 #define IWL_BF_ROAMING_ENERGY_DELTA_MIN 0
 
 #define IWL_BF_ROAMING_STATE_DEFAULT 72
+#define IWL_BF_ROAMING_STATE_D0I3 72
 #define IWL_BF_ROAMING_STATE_MAX 255
 #define IWL_BF_ROAMING_STATE_MIN 0
 
 #define IWL_BF_TEMP_THRESHOLD_DEFAULT 112
+#define IWL_BF_TEMP_THRESHOLD_D0I3 112
 #define IWL_BF_TEMP_THRESHOLD_MAX 255
 #define IWL_BF_TEMP_THRESHOLD_MIN 0
 
 #define IWL_BF_TEMP_FAST_FILTER_DEFAULT 1
+#define IWL_BF_TEMP_FAST_FILTER_D0I3 1
 #define IWL_BF_TEMP_FAST_FILTER_MAX 255
 #define IWL_BF_TEMP_FAST_FILTER_MIN 0
 
 #define IWL_BF_TEMP_SLOW_FILTER_DEFAULT 5
+#define IWL_BF_TEMP_SLOW_FILTER_D0I3 5
 #define IWL_BF_TEMP_SLOW_FILTER_MAX 255
 #define IWL_BF_TEMP_SLOW_FILTER_MIN 0
 
 #define IWL_BF_ENABLE_BEACON_FILTER_DEFAULT 1
 
 #define IWL_BF_DEBUG_FLAG_DEFAULT 0
+#define IWL_BF_DEBUG_FLAG_D0I3 0
 
 #define IWL_BF_ESCAPE_TIMER_DEFAULT 50
+#define IWL_BF_ESCAPE_TIMER_D0I3 1024
 #define IWL_BF_ESCAPE_TIMER_MAX 1024
 #define IWL_BF_ESCAPE_TIMER_MIN 0
 
 #define IWL_BA_ESCAPE_TIMER_DEFAULT 6
+#define IWL_BA_ESCAPE_TIMER_D0I3 6
 #define IWL_BA_ESCAPE_TIMER_D3 9
 #define IWL_BA_ESCAPE_TIMER_MAX 1024
 #define IWL_BA_ESCAPE_TIMER_MIN 0
 
 #define IWL_BA_ENABLE_BEACON_ABORT_DEFAULT 1
 
-#define IWL_BF_CMD_CONFIG_DEFAULTS					     \
-	.bf_energy_delta = cpu_to_le32(IWL_BF_ENERGY_DELTA_DEFAULT),	     \
-	.bf_roaming_energy_delta =					     \
-		cpu_to_le32(IWL_BF_ROAMING_ENERGY_DELTA_DEFAULT),	     \
-	.bf_roaming_state = cpu_to_le32(IWL_BF_ROAMING_STATE_DEFAULT),	     \
-	.bf_temp_threshold = cpu_to_le32(IWL_BF_TEMP_THRESHOLD_DEFAULT),     \
-	.bf_temp_fast_filter = cpu_to_le32(IWL_BF_TEMP_FAST_FILTER_DEFAULT), \
-	.bf_temp_slow_filter = cpu_to_le32(IWL_BF_TEMP_SLOW_FILTER_DEFAULT), \
-	.bf_debug_flag = cpu_to_le32(IWL_BF_DEBUG_FLAG_DEFAULT),	     \
-	.bf_escape_timer = cpu_to_le32(IWL_BF_ESCAPE_TIMER_DEFAULT),	     \
-	.ba_escape_timer = cpu_to_le32(IWL_BA_ESCAPE_TIMER_DEFAULT)
+#define IWL_BF_CMD_CONFIG(mode)					     \
+	.bf_energy_delta = cpu_to_le32(IWL_BF_ENERGY_DELTA ## mode),	      \
+	.bf_roaming_energy_delta =					      \
+		cpu_to_le32(IWL_BF_ROAMING_ENERGY_DELTA ## mode),	      \
+	.bf_roaming_state = cpu_to_le32(IWL_BF_ROAMING_STATE ## mode),	      \
+	.bf_temp_threshold = cpu_to_le32(IWL_BF_TEMP_THRESHOLD ## mode),      \
+	.bf_temp_fast_filter = cpu_to_le32(IWL_BF_TEMP_FAST_FILTER ## mode),  \
+	.bf_temp_slow_filter = cpu_to_le32(IWL_BF_TEMP_SLOW_FILTER ## mode),  \
+	.bf_debug_flag = cpu_to_le32(IWL_BF_DEBUG_FLAG ## mode),	      \
+	.bf_escape_timer = cpu_to_le32(IWL_BF_ESCAPE_TIMER ## mode),	      \
+	.ba_escape_timer = cpu_to_le32(IWL_BA_ESCAPE_TIMER ## mode)
 
+#define IWL_BF_CMD_CONFIG_DEFAULTS IWL_BF_CMD_CONFIG(_DEFAULT)
+#define IWL_BF_CMD_CONFIG_D0I3 IWL_BF_CMD_CONFIG(_D0I3)
 #endif
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index 67c0dfcc7285..de38deb7e4f2 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -677,7 +677,7 @@ static int iwl_mvm_mac_add_interface(struct ieee80211_hw *hw,
 	iwl_mvm_power_disable(mvm, vif);
 
 	/* beacon filtering */
-	ret = iwl_mvm_disable_beacon_filter(mvm, vif);
+	ret = iwl_mvm_disable_beacon_filter(mvm, vif, CMD_SYNC);
 	if (ret)
 		goto out_remove_mac;
 
@@ -1213,7 +1213,7 @@ static void iwl_mvm_bss_info_changed_station(struct iwl_mvm *mvm,
 		IWL_DEBUG_MAC80211(mvm, "cqm info_changed");
 		/* reset cqm events tracking */
 		mvmvif->bf_data.last_cqm_event = 0;
-		ret = iwl_mvm_update_beacon_filter(mvm, vif);
+		ret = iwl_mvm_update_beacon_filter(mvm, vif, false, CMD_SYNC);
 		if (ret)
 			IWL_ERR(mvm, "failed to update CQM thresholds\n");
 	}
@@ -1561,12 +1561,12 @@ static int iwl_mvm_mac_sta_state(struct ieee80211_hw *hw,
 	} else if (old_state == IEEE80211_STA_ASSOC &&
 		   new_state == IEEE80211_STA_AUTHORIZED) {
 		/* enable beacon filtering */
-		WARN_ON(iwl_mvm_enable_beacon_filter(mvm, vif));
+		WARN_ON(iwl_mvm_enable_beacon_filter(mvm, vif, CMD_SYNC));
 		ret = 0;
 	} else if (old_state == IEEE80211_STA_AUTHORIZED &&
 		   new_state == IEEE80211_STA_ASSOC) {
 		/* disable beacon filtering */
-		WARN_ON(iwl_mvm_disable_beacon_filter(mvm, vif));
+		WARN_ON(iwl_mvm_disable_beacon_filter(mvm, vif, CMD_SYNC));
 		ret = 0;
 	} else if (old_state == IEEE80211_STA_ASSOC &&
 		   new_state == IEEE80211_STA_AUTH) {
@@ -2149,8 +2149,9 @@ static int __iwl_mvm_mac_testmode_cmd(struct iwl_mvm *mvm,
 			return -EINVAL;
 
 		if (nla_get_u32(tb[IWL_MVM_TM_ATTR_BEACON_FILTER_STATE]))
-			return iwl_mvm_enable_beacon_filter(mvm, vif);
-		return iwl_mvm_disable_beacon_filter(mvm, vif);
+			return iwl_mvm_enable_beacon_filter(mvm, vif,
+							    CMD_SYNC);
+		return iwl_mvm_disable_beacon_filter(mvm, vif, CMD_SYNC);
 	}
 
 	return -EOPNOTSUPP;
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index 3202a6ee7e96..0a8c65bd18a0 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -912,16 +912,24 @@ iwl_mvm_beacon_filter_debugfs_parameters(struct ieee80211_vif *vif,
 					 struct iwl_beacon_filter_cmd *cmd)
 {}
 #endif
+int iwl_mvm_update_d0i3_power_mode(struct iwl_mvm *mvm,
+				   struct ieee80211_vif *vif,
+				   bool enable, u32 flags);
 int iwl_mvm_enable_beacon_filter(struct iwl_mvm *mvm,
-				 struct ieee80211_vif *vif);
+				 struct ieee80211_vif *vif,
+				 u32 flags);
 int iwl_mvm_disable_beacon_filter(struct iwl_mvm *mvm,
-				  struct ieee80211_vif *vif);
+				  struct ieee80211_vif *vif,
+				  u32 flags);
 int iwl_mvm_beacon_filter_send_cmd(struct iwl_mvm *mvm,
-				   struct iwl_beacon_filter_cmd *cmd);
+				   struct iwl_beacon_filter_cmd *cmd,
+				   u32 flags);
 int iwl_mvm_update_beacon_abort(struct iwl_mvm *mvm,
 				struct ieee80211_vif *vif, bool enable);
 int iwl_mvm_update_beacon_filter(struct iwl_mvm *mvm,
-				  struct ieee80211_vif *vif);
+				 struct ieee80211_vif *vif,
+				 bool force,
+				 u32 flags);
 
 /* SMPS */
 void iwl_mvm_update_smps(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
diff --git a/drivers/net/wireless/iwlwifi/mvm/power.c b/drivers/net/wireless/iwlwifi/mvm/power.c
index 436c7e0ae6b1..b20771c5e84b 100644
--- a/drivers/net/wireless/iwlwifi/mvm/power.c
+++ b/drivers/net/wireless/iwlwifi/mvm/power.c
@@ -75,11 +75,12 @@
 #define POWER_KEEP_ALIVE_PERIOD_SEC    25
 
 int iwl_mvm_beacon_filter_send_cmd(struct iwl_mvm *mvm,
-				   struct iwl_beacon_filter_cmd *cmd)
+				   struct iwl_beacon_filter_cmd *cmd,
+				   u32 flags)
 {
 	int ret;
 
-	ret = iwl_mvm_send_cmd_pdu(mvm, REPLY_BEACON_FILTERING_CMD, CMD_SYNC,
+	ret = iwl_mvm_send_cmd_pdu(mvm, REPLY_BEACON_FILTERING_CMD, flags,
 				   sizeof(struct iwl_beacon_filter_cmd), cmd);
 
 	if (!ret) {
@@ -145,7 +146,7 @@ int iwl_mvm_update_beacon_abort(struct iwl_mvm *mvm,
 	mvmvif->bf_data.ba_enabled = enable;
 	iwl_mvm_beacon_filter_set_cqm_params(mvm, vif, &cmd);
 	iwl_mvm_beacon_filter_debugfs_parameters(vif, &cmd);
-	return iwl_mvm_beacon_filter_send_cmd(mvm, &cmd);
+	return iwl_mvm_beacon_filter_send_cmd(mvm, &cmd, CMD_SYNC);
 }
 
 static void iwl_mvm_power_log(struct iwl_mvm *mvm,
@@ -686,32 +687,46 @@ iwl_mvm_beacon_filter_debugfs_parameters(struct ieee80211_vif *vif,
 }
 #endif
 
-int iwl_mvm_enable_beacon_filter(struct iwl_mvm *mvm,
-				 struct ieee80211_vif *vif)
+static int _iwl_mvm_enable_beacon_filter(struct iwl_mvm *mvm,
+					 struct ieee80211_vif *vif,
+					 struct iwl_beacon_filter_cmd *cmd,
+					 u32 cmd_flags,
+					 bool d0i3)
 {
 	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
-	struct iwl_beacon_filter_cmd cmd = {
-		IWL_BF_CMD_CONFIG_DEFAULTS,
-		.bf_enable_beacon_filter = cpu_to_le32(1),
-	};
 	int ret;
 
 	if (mvmvif != mvm->bf_allowed_vif ||
 	    vif->type != NL80211_IFTYPE_STATION || vif->p2p)
 		return 0;
 
-	iwl_mvm_beacon_filter_set_cqm_params(mvm, vif, &cmd);
-	iwl_mvm_beacon_filter_debugfs_parameters(vif, &cmd);
-	ret = iwl_mvm_beacon_filter_send_cmd(mvm, &cmd);
+	iwl_mvm_beacon_filter_set_cqm_params(mvm, vif, cmd);
+	if (!d0i3)
+		iwl_mvm_beacon_filter_debugfs_parameters(vif, cmd);
+	ret = iwl_mvm_beacon_filter_send_cmd(mvm, cmd, cmd_flags);
 
-	if (!ret)
+	/* don't change bf_enabled in case of temporary d0i3 configuration */
+	if (!ret && !d0i3)
 		mvmvif->bf_data.bf_enabled = true;
 
 	return ret;
 }
 
+int iwl_mvm_enable_beacon_filter(struct iwl_mvm *mvm,
+				 struct ieee80211_vif *vif,
+				 u32 flags)
+{
+	struct iwl_beacon_filter_cmd cmd = {
+		IWL_BF_CMD_CONFIG_DEFAULTS,
+		.bf_enable_beacon_filter = cpu_to_le32(1),
+	};
+
+	return _iwl_mvm_enable_beacon_filter(mvm, vif, &cmd, flags, false);
+}
+
 int iwl_mvm_disable_beacon_filter(struct iwl_mvm *mvm,
-				  struct ieee80211_vif *vif)
+				  struct ieee80211_vif *vif,
+				  u32 flags)
 {
 	struct iwl_beacon_filter_cmd cmd = {};
 	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
@@ -721,7 +736,7 @@ int iwl_mvm_disable_beacon_filter(struct iwl_mvm *mvm,
 	    vif->type != NL80211_IFTYPE_STATION || vif->p2p)
 		return 0;
 
-	ret = iwl_mvm_beacon_filter_send_cmd(mvm, &cmd);
+	ret = iwl_mvm_beacon_filter_send_cmd(mvm, &cmd, flags);
 
 	if (!ret)
 		mvmvif->bf_data.bf_enabled = false;
@@ -729,15 +744,78 @@ int iwl_mvm_disable_beacon_filter(struct iwl_mvm *mvm,
 	return ret;
 }
 
+int iwl_mvm_update_d0i3_power_mode(struct iwl_mvm *mvm,
+				   struct ieee80211_vif *vif,
+				   bool enable, u32 flags)
+{
+	int ret;
+	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
+	struct iwl_mac_power_cmd cmd = {};
+
+	if (vif->type != NL80211_IFTYPE_STATION || vif->p2p)
+		return 0;
+
+	if (!vif->bss_conf.assoc)
+		return 0;
+
+	iwl_mvm_power_build_cmd(mvm, vif, &cmd);
+	if (enable) {
+		/* configure skip over dtim up to 300 msec */
+		int dtimper = mvm->hw->conf.ps_dtim_period ?: 1;
+		int dtimper_msec = dtimper * vif->bss_conf.beacon_int;
+
+		if (WARN_ON(!dtimper_msec))
+			return 0;
+
+		cmd.flags |=
+			cpu_to_le16(POWER_FLAGS_SKIP_OVER_DTIM_MSK);
+		cmd.skip_dtim_periods = 300 / dtimper_msec;
+	}
+	iwl_mvm_power_log(mvm, &cmd);
+	ret = iwl_mvm_send_cmd_pdu(mvm, MAC_PM_POWER_TABLE, flags,
+				   sizeof(cmd), &cmd);
+	if (ret)
+		return ret;
+
+	/* configure beacon filtering */
+	if (mvmvif != mvm->bf_allowed_vif)
+		return 0;
+
+	if (enable) {
+		struct iwl_beacon_filter_cmd cmd_bf = {
+			IWL_BF_CMD_CONFIG_D0I3,
+			.bf_enable_beacon_filter = cpu_to_le32(1),
+		};
+		ret = _iwl_mvm_enable_beacon_filter(mvm, vif, &cmd_bf,
+						    flags, true);
+	} else {
+		if (mvmvif->bf_data.bf_enabled)
+			ret = iwl_mvm_enable_beacon_filter(mvm, vif, flags);
+		else
+			ret = iwl_mvm_disable_beacon_filter(mvm, vif, flags);
+	}
+
+	return ret;
+}
+
 int iwl_mvm_update_beacon_filter(struct iwl_mvm *mvm,
-				 struct ieee80211_vif *vif)
+				 struct ieee80211_vif *vif,
+				 bool force,
+				 u32 flags)
 {
 	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
 
-	if (!mvmvif->bf_data.bf_enabled)
+	if (mvmvif != mvm->bf_allowed_vif)
 		return 0;
 
-	return iwl_mvm_enable_beacon_filter(mvm, vif);
+	if (!mvmvif->bf_data.bf_enabled) {
+		/* disable beacon filtering explicitly if force is true */
+		if (force)
+			return iwl_mvm_disable_beacon_filter(mvm, vif, flags);
+		return 0;
+	}
+
+	return iwl_mvm_enable_beacon_filter(mvm, vif, flags);
 }
 
 const struct iwl_mvm_power_ops pm_mac_ops = {
-- 
cgit v1.2.2


From d62309726d498e6f23e1f4ecdb12b0e4b59b0c8a Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Sun, 3 Nov 2013 20:09:08 +0200
Subject: iwlwifi: mvm: configure vifs upon D0i3 entry/exit

Upon D0i3 entry/exit, iterate over the active interfaces
and configure them appropriately.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/ops.c | 51 +++++++++++++++++++++++++++++++++-
 1 file changed, 50 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c
index 6e46b7c70473..cdb4c929e017 100644
--- a/drivers/net/wireless/iwlwifi/mvm/ops.c
+++ b/drivers/net/wireless/iwlwifi/mvm/ops.c
@@ -813,6 +813,27 @@ static void iwl_mvm_cmd_queue_full(struct iwl_op_mode *op_mode)
 	iwl_mvm_nic_restart(mvm);
 }
 
+static void iwl_mvm_enter_d0i3_iterator(void *_data, u8 *mac,
+					struct ieee80211_vif *vif)
+{
+	struct iwl_mvm *mvm = _data;
+	u32 flags = CMD_ASYNC | CMD_HIGH_PRIO | CMD_SEND_IN_IDLE;
+
+	IWL_DEBUG_RPM(mvm, "entering D0i3 - vif %pM\n", vif->addr);
+	if (vif->type != NL80211_IFTYPE_STATION ||
+	    !vif->bss_conf.assoc)
+		return;
+
+	iwl_mvm_update_d0i3_power_mode(mvm, vif, true, flags);
+
+	/*
+	 * on init/association, mvm already configures POWER_TABLE_CMD
+	 * and REPLY_MCAST_FILTER_CMD, so currently don't
+	 * reconfigure them (we might want to use different
+	 * params later on, though).
+	 */
+}
+
 static int iwl_mvm_enter_d0i3(struct iwl_op_mode *op_mode)
 {
 	struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode);
@@ -823,20 +844,48 @@ static int iwl_mvm_enter_d0i3(struct iwl_op_mode *op_mode)
 
 	IWL_DEBUG_RPM(mvm, "MVM entering D0i3\n");
 
+	ieee80211_iterate_active_interfaces_atomic(mvm->hw,
+						   IEEE80211_IFACE_ITER_NORMAL,
+						   iwl_mvm_enter_d0i3_iterator,
+						   mvm);
+
 	return iwl_mvm_send_cmd_pdu(mvm, D3_CONFIG_CMD,
 				    flags | CMD_MAKE_TRANS_IDLE,
 				    sizeof(d3_cfg_cmd), &d3_cfg_cmd);
 }
 
+static void iwl_mvm_exit_d0i3_iterator(void *_data, u8 *mac,
+				       struct ieee80211_vif *vif)
+{
+	struct iwl_mvm *mvm = _data;
+	u32 flags = CMD_ASYNC | CMD_HIGH_PRIO;
+
+	IWL_DEBUG_RPM(mvm, "exiting D0i3 - vif %pM\n", vif->addr);
+	if (vif->type != NL80211_IFTYPE_STATION ||
+	    !vif->bss_conf.assoc)
+		return;
+
+	iwl_mvm_update_d0i3_power_mode(mvm, vif, false, flags);
+}
+
 static int iwl_mvm_exit_d0i3(struct iwl_op_mode *op_mode)
 {
 	struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode);
 	u32 flags = CMD_ASYNC | CMD_HIGH_PRIO | CMD_SEND_IN_IDLE |
 		    CMD_WAKE_UP_TRANS;
+	int ret;
 
 	IWL_DEBUG_RPM(mvm, "MVM exiting D0i3\n");
 
-	return iwl_mvm_send_cmd_pdu(mvm, D0I3_END_CMD, flags, 0, NULL);
+	ret = iwl_mvm_send_cmd_pdu(mvm, D0I3_END_CMD, flags, 0, NULL);
+	if (ret)
+		return ret;
+
+	ieee80211_iterate_active_interfaces_atomic(mvm->hw,
+						   IEEE80211_IFACE_ITER_NORMAL,
+						   iwl_mvm_exit_d0i3_iterator,
+						   mvm);
+	return 0;
 }
 
 static const struct iwl_op_mode_ops iwl_mvm_ops = {
-- 
cgit v1.2.2


From 7498cf4cebc2dab430d41ea5ccaac2197b9c7020 Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Thu, 16 Jan 2014 17:10:44 +0200
Subject: iwlwifi: mvm: allow transport sleep when FW is operational

Hold a bitmap of taken references, according to the
reference reason (e.g. down, scan).

This will allow us validate our state and add some debugfs
entries later on.

Unref the transport when the FW is fully initialized,
allowing it to go into a low power mode.

Disallow the transition to low-power while recovery is in
progress.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/fw.c       |  4 +++
 drivers/net/wireless/iwlwifi/mvm/mac80211.c | 49 +++++++++++++++++++++++++++++
 drivers/net/wireless/iwlwifi/mvm/mvm.h      | 13 ++++++++
 drivers/net/wireless/iwlwifi/mvm/ops.c      |  6 ++++
 4 files changed, 72 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/fw.c b/drivers/net/wireless/iwlwifi/mvm/fw.c
index 5798f1ae7482..212ffecf038b 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw.c
+++ b/drivers/net/wireless/iwlwifi/mvm/fw.c
@@ -446,6 +446,10 @@ int iwl_mvm_up(struct iwl_mvm *mvm)
 	if (ret)
 		goto error;
 
+	/* allow FW/transport low power modes if not during restart */
+	if (!test_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status))
+		iwl_mvm_unref(mvm, IWL_MVM_REF_UCODE_DOWN);
+
 	IWL_DEBUG_INFO(mvm, "RT uCode started.\n");
 	return 0;
  error:
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index de38deb7e4f2..e12168556381 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -202,6 +202,44 @@ static const struct iwl_fw_bcast_filter iwl_mvm_default_bcast_filters[] = {
 };
 #endif
 
+void iwl_mvm_ref(struct iwl_mvm *mvm, enum iwl_mvm_ref_type ref_type)
+{
+	if (!mvm->trans->cfg->d0i3)
+		return;
+
+	IWL_DEBUG_RPM(mvm, "Take mvm reference - type %d\n", ref_type);
+	WARN_ON(test_and_set_bit(ref_type, mvm->ref_bitmap));
+	iwl_trans_ref(mvm->trans);
+}
+
+void iwl_mvm_unref(struct iwl_mvm *mvm, enum iwl_mvm_ref_type ref_type)
+{
+	if (!mvm->trans->cfg->d0i3)
+		return;
+
+	IWL_DEBUG_RPM(mvm, "Leave mvm reference - type %d\n", ref_type);
+	WARN_ON(!test_and_clear_bit(ref_type, mvm->ref_bitmap));
+	iwl_trans_unref(mvm->trans);
+}
+
+static void
+iwl_mvm_unref_all_except(struct iwl_mvm *mvm, enum iwl_mvm_ref_type ref)
+{
+	int i;
+
+	if (!mvm->trans->cfg->d0i3)
+		return;
+
+	for_each_set_bit(i, mvm->ref_bitmap, IWL_MVM_REF_COUNT) {
+		if (ref == i)
+			continue;
+
+		IWL_DEBUG_RPM(mvm, "Cleanup: remove mvm ref type %d\n", i);
+		clear_bit(i, mvm->ref_bitmap);
+		iwl_trans_unref(mvm->trans);
+	}
+}
+
 static void iwl_mvm_reset_phy_ctxts(struct iwl_mvm *mvm)
 {
 	int i;
@@ -516,6 +554,10 @@ static void iwl_mvm_restart_cleanup(struct iwl_mvm *mvm)
 
 	ieee80211_wake_queues(mvm->hw);
 
+	/* cleanup all stale references (scan, roc), but keep the
+	 * ucode_down ref until reconfig is complete */
+	iwl_mvm_unref_all_except(mvm, IWL_MVM_REF_UCODE_DOWN);
+
 	mvm->vif_count = 0;
 	mvm->rx_ba_sessions = 0;
 }
@@ -550,6 +592,9 @@ static void iwl_mvm_mac_restart_complete(struct ieee80211_hw *hw)
 		IWL_ERR(mvm, "Failed to update quotas after restart (%d)\n",
 			ret);
 
+	/* allow transport/FW low power modes */
+	iwl_mvm_unref(mvm, IWL_MVM_REF_UCODE_DOWN);
+
 	mutex_unlock(&mvm->mutex);
 }
 
@@ -560,6 +605,10 @@ static void iwl_mvm_mac_stop(struct ieee80211_hw *hw)
 	flush_work(&mvm->async_handlers_wk);
 
 	mutex_lock(&mvm->mutex);
+
+	/* disallow low power states when the FW is down */
+	iwl_mvm_ref(mvm, IWL_MVM_REF_UCODE_DOWN);
+
 	/* async_handlers_wk is now blocked */
 
 	/*
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index 0a8c65bd18a0..9ffafe80dad5 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -239,6 +239,12 @@ enum iwl_mvm_smps_type_request {
 	NUM_IWL_MVM_SMPS_REQ,
 };
 
+enum iwl_mvm_ref_type {
+	IWL_MVM_REF_UCODE_DOWN,
+
+	IWL_MVM_REF_COUNT,
+};
+
 /**
 * struct iwl_mvm_vif_bf_data - beacon filtering related data
 * @bf_enabled: indicates if beacon filtering is enabled
@@ -542,6 +548,9 @@ struct iwl_mvm {
 	 */
 	unsigned long fw_key_table[BITS_TO_LONGS(STA_KEY_MAX_NUM)];
 
+	/* A bitmap of reference types taken by the driver. */
+	unsigned long ref_bitmap[BITS_TO_LONGS(IWL_MVM_REF_COUNT)];
+
 	u8 vif_count;
 
 	/* -1 for always, 0 for never, >0 for that many times */
@@ -877,6 +886,10 @@ iwl_mvm_set_last_nonqos_seq(struct iwl_mvm *mvm, struct ieee80211_vif *vif)
 }
 #endif
 
+/* D0i3 */
+void iwl_mvm_ref(struct iwl_mvm *mvm, enum iwl_mvm_ref_type ref_type);
+void iwl_mvm_unref(struct iwl_mvm *mvm, enum iwl_mvm_ref_type ref_type);
+
 /* BT Coex */
 int iwl_send_bt_prio_tbl(struct iwl_mvm *mvm);
 int iwl_send_bt_init_conf(struct iwl_mvm *mvm);
diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c
index cdb4c929e017..5bc44395fa96 100644
--- a/drivers/net/wireless/iwlwifi/mvm/ops.c
+++ b/drivers/net/wireless/iwlwifi/mvm/ops.c
@@ -501,6 +501,9 @@ iwl_op_mode_mvm_start(struct iwl_trans *trans, const struct iwl_cfg *cfg,
 
 	memset(&mvm->rx_stats, 0, sizeof(struct mvm_statistics_rx));
 
+	/* rpm starts with a taken ref. only set the appropriate bit here. */
+	set_bit(IWL_MVM_REF_UCODE_DOWN, mvm->ref_bitmap);
+
 	return op_mode;
 
  out_unregister:
@@ -788,6 +791,9 @@ static void iwl_mvm_nic_restart(struct iwl_mvm *mvm)
 		INIT_WORK(&reprobe->work, iwl_mvm_reprobe_wk);
 		schedule_work(&reprobe->work);
 	} else if (mvm->cur_ucode == IWL_UCODE_REGULAR && mvm->restart_fw) {
+		/* don't let the transport/FW power down */
+		iwl_mvm_ref(mvm, IWL_MVM_REF_UCODE_DOWN);
+
 		if (mvm->restart_fw > 0)
 			mvm->restart_fw--;
 		ieee80211_restart_hw(mvm->hw);
-- 
cgit v1.2.2


From 519e202649590b4fc1f84cda795af4cf79363362 Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Thu, 17 Oct 2013 17:51:35 +0300
Subject: iwlwifi: mvm: add D0i3 ref/unref for scan

Take a reference when starting to scan and release it on completion.
Note that if the scan is cancelled/aborted, a completion will still be
sent up.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/mac80211.c | 12 +++++++++---
 drivers/net/wireless/iwlwifi/mvm/mvm.h      |  1 +
 drivers/net/wireless/iwlwifi/mvm/scan.c     |  3 +++
 3 files changed, 13 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index e12168556381..64d9efd127d7 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -1442,11 +1442,17 @@ static int iwl_mvm_mac_hw_scan(struct ieee80211_hw *hw,
 
 	mutex_lock(&mvm->mutex);
 
-	if (mvm->scan_status == IWL_MVM_SCAN_NONE)
-		ret = iwl_mvm_scan_request(mvm, vif, req);
-	else
+	if (mvm->scan_status != IWL_MVM_SCAN_NONE) {
 		ret = -EBUSY;
+		goto out;
+	}
 
+	iwl_mvm_ref(mvm, IWL_MVM_REF_SCAN);
+
+	ret = iwl_mvm_scan_request(mvm, vif, req);
+	if (ret)
+		iwl_mvm_unref(mvm, IWL_MVM_REF_SCAN);
+out:
 	mutex_unlock(&mvm->mutex);
 
 	return ret;
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index 9ffafe80dad5..3a3e9f18a2ed 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -241,6 +241,7 @@ enum iwl_mvm_smps_type_request {
 
 enum iwl_mvm_ref_type {
 	IWL_MVM_REF_UCODE_DOWN,
+	IWL_MVM_REF_SCAN,
 
 	IWL_MVM_REF_COUNT,
 };
diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c
index 6c5c17397f7e..8477902a9183 100644
--- a/drivers/net/wireless/iwlwifi/mvm/scan.c
+++ b/drivers/net/wireless/iwlwifi/mvm/scan.c
@@ -407,6 +407,8 @@ int iwl_mvm_rx_scan_complete(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb,
 	mvm->scan_status = IWL_MVM_SCAN_NONE;
 	ieee80211_scan_completed(mvm->hw, notif->status != SCAN_COMP_STATUS_OK);
 
+	iwl_mvm_unref(mvm, IWL_MVM_REF_SCAN);
+
 	return 0;
 }
 
@@ -475,6 +477,7 @@ void iwl_mvm_cancel_scan(struct iwl_mvm *mvm)
 
 	if (iwl_mvm_is_radio_killed(mvm)) {
 		ieee80211_scan_completed(mvm->hw, true);
+		iwl_mvm_unref(mvm, IWL_MVM_REF_SCAN);
 		mvm->scan_status = IWL_MVM_SCAN_NONE;
 		return;
 	}
-- 
cgit v1.2.2


From 9f45c36d9bad679524e228a31e4d08612bdbb438 Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Mon, 28 Oct 2013 13:13:56 +0200
Subject: iwlwifi: mvm: add D0i3 ref/unref for ROC commands

Take a reference when ROC command is started, and
unref it on completion.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/mvm.h        | 1 +
 drivers/net/wireless/iwlwifi/mvm/time-event.c | 2 ++
 2 files changed, 3 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index 3a3e9f18a2ed..19a90d127011 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -242,6 +242,7 @@ enum iwl_mvm_smps_type_request {
 enum iwl_mvm_ref_type {
 	IWL_MVM_REF_UCODE_DOWN,
 	IWL_MVM_REF_SCAN,
+	IWL_MVM_REF_ROC,
 
 	IWL_MVM_REF_COUNT,
 };
diff --git a/drivers/net/wireless/iwlwifi/mvm/time-event.c b/drivers/net/wireless/iwlwifi/mvm/time-event.c
index b4c2abaa297b..e145dd41e85e 100644
--- a/drivers/net/wireless/iwlwifi/mvm/time-event.c
+++ b/drivers/net/wireless/iwlwifi/mvm/time-event.c
@@ -126,6 +126,7 @@ static void iwl_mvm_roc_finished(struct iwl_mvm *mvm)
 	 * in iwl_mvm_te_handle_notif).
 	 */
 	clear_bit(IWL_MVM_STATUS_ROC_RUNNING, &mvm->status);
+	iwl_mvm_unref(mvm, IWL_MVM_REF_ROC);
 
 	/*
 	 * Of course, our status bit is just as racy as mac80211, so in
@@ -210,6 +211,7 @@ static void iwl_mvm_te_handle_notif(struct iwl_mvm *mvm,
 
 		if (te_data->vif->type == NL80211_IFTYPE_P2P_DEVICE) {
 			set_bit(IWL_MVM_STATUS_ROC_RUNNING, &mvm->status);
+			iwl_mvm_ref(mvm, IWL_MVM_REF_ROC);
 			ieee80211_ready_on_channel(mvm->hw);
 		}
 	} else {
-- 
cgit v1.2.2


From 29a90a49f0c27ca80e1c5b69a880e723b0e5e3b3 Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Tue, 5 Nov 2013 14:06:29 +0200
Subject: iwlwifi: mvm: add D0i3 ref/unref when ap, ibss or p2p_cli vifs are
 running

We don't want to go into D0i3, when P2P_CLI, AP (including
GO) or IBSS interfaces are running, so take appropriate
references.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/mac80211.c | 9 +++++++++
 drivers/net/wireless/iwlwifi/mvm/mvm.h      | 2 ++
 2 files changed, 11 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index 64d9efd127d7..827510ea7eab 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -1202,6 +1202,8 @@ static void iwl_mvm_bss_info_changed_station(struct iwl_mvm *mvm,
 
 			iwl_mvm_sf_update(mvm, vif, false);
 			iwl_mvm_power_vif_assoc(mvm, vif);
+			if (vif->p2p)
+				iwl_mvm_ref(mvm, IWL_MVM_REF_P2P_CLIENT);
 		} else if (mvmvif->ap_sta_id != IWL_MVM_STATION_COUNT) {
 			/*
 			 * If update fails - SF might be running in associated
@@ -1219,6 +1221,9 @@ static void iwl_mvm_bss_info_changed_station(struct iwl_mvm *mvm,
 			ret = iwl_mvm_update_quotas(mvm, NULL);
 			if (ret)
 				IWL_ERR(mvm, "failed to update quotas\n");
+
+			if (vif->p2p)
+				iwl_mvm_unref(mvm, IWL_MVM_REF_P2P_CLIENT);
 		}
 
 		iwl_mvm_recalc_multicast(mvm);
@@ -1327,6 +1332,8 @@ static int iwl_mvm_start_ap_ibss(struct ieee80211_hw *hw,
 	if (vif->p2p && mvm->p2p_device_vif)
 		iwl_mvm_mac_ctxt_changed(mvm, mvm->p2p_device_vif);
 
+	iwl_mvm_ref(mvm, IWL_MVM_REF_AP_IBSS);
+
 	iwl_mvm_bt_coex_vif_change(mvm);
 
 	mutex_unlock(&mvm->mutex);
@@ -1360,6 +1367,8 @@ static void iwl_mvm_stop_ap_ibss(struct ieee80211_hw *hw,
 
 	iwl_mvm_bt_coex_vif_change(mvm);
 
+	iwl_mvm_unref(mvm, IWL_MVM_REF_AP_IBSS);
+
 	/* Need to update the P2P Device MAC (only GO, IBSS is single vif) */
 	if (vif->p2p && mvm->p2p_device_vif)
 		iwl_mvm_mac_ctxt_changed(mvm, mvm->p2p_device_vif);
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index 19a90d127011..fe3896ca16e7 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -243,6 +243,8 @@ enum iwl_mvm_ref_type {
 	IWL_MVM_REF_UCODE_DOWN,
 	IWL_MVM_REF_SCAN,
 	IWL_MVM_REF_ROC,
+	IWL_MVM_REF_P2P_CLIENT,
+	IWL_MVM_REF_AP_IBSS,
 
 	IWL_MVM_REF_COUNT,
 };
-- 
cgit v1.2.2


From 70d6babbc9f5b85e8aa52eadf5cca18ca8a3353e Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Tue, 5 Nov 2013 14:45:16 +0200
Subject: iwlwifi: mvm: add d0i3_refs debugfs file

Add d0i3_refs debugfs file that prints the currently taken
mvm D0i3 refs.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/debugfs.c | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/debugfs.c b/drivers/net/wireless/iwlwifi/mvm/debugfs.c
index 6ddc18896608..2253d5b2a59c 100644
--- a/drivers/net/wireless/iwlwifi/mvm/debugfs.c
+++ b/drivers/net/wireless/iwlwifi/mvm/debugfs.c
@@ -838,6 +838,34 @@ static ssize_t iwl_dbgfs_d3_sram_read(struct file *file, char __user *user_buf,
 }
 #endif
 
+#define PRINT_MVM_REF(ref) do {					\
+	if (test_bit(ref, mvm->ref_bitmap))			\
+		pos += scnprintf(buf + pos, bufsz - pos,	\
+				 "\t(0x%lx) %s\n",		\
+				 BIT(ref), #ref);		\
+} while (0)
+
+static ssize_t iwl_dbgfs_d0i3_refs_read(struct file *file,
+					char __user *user_buf,
+					size_t count, loff_t *ppos)
+{
+	struct iwl_mvm *mvm = file->private_data;
+	int pos = 0;
+	char buf[256];
+	const size_t bufsz = sizeof(buf);
+
+	pos += scnprintf(buf + pos, bufsz - pos, "taken mvm refs: 0x%lx\n",
+			 mvm->ref_bitmap[0]);
+
+	PRINT_MVM_REF(IWL_MVM_REF_UCODE_DOWN);
+	PRINT_MVM_REF(IWL_MVM_REF_SCAN);
+	PRINT_MVM_REF(IWL_MVM_REF_ROC);
+	PRINT_MVM_REF(IWL_MVM_REF_P2P_CLIENT);
+	PRINT_MVM_REF(IWL_MVM_REF_AP_IBSS);
+
+	return simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+}
+
 #define MVM_DEBUGFS_WRITE_FILE_OPS(name, bufsz) \
 	_MVM_DEBUGFS_WRITE_FILE_OPS(name, bufsz, struct iwl_mvm)
 #define MVM_DEBUGFS_READ_WRITE_FILE_OPS(name, bufsz) \
@@ -862,6 +890,7 @@ MVM_DEBUGFS_READ_FILE_OPS(fw_rx_stats);
 MVM_DEBUGFS_WRITE_FILE_OPS(fw_restart, 10);
 MVM_DEBUGFS_WRITE_FILE_OPS(fw_nmi, 10);
 MVM_DEBUGFS_READ_WRITE_FILE_OPS(scan_ant_rxchain, 8);
+MVM_DEBUGFS_READ_FILE_OPS(d0i3_refs);
 
 #ifdef CONFIG_IWLWIFI_BCAST_FILTERING
 MVM_DEBUGFS_READ_WRITE_FILE_OPS(bcast_filters, 256);
@@ -893,6 +922,7 @@ int iwl_mvm_dbgfs_register(struct iwl_mvm *mvm, struct dentry *dbgfs_dir)
 	MVM_DEBUGFS_ADD_FILE(fw_nmi, mvm->debugfs_dir, S_IWUSR);
 	MVM_DEBUGFS_ADD_FILE(scan_ant_rxchain, mvm->debugfs_dir,
 			     S_IWUSR | S_IRUSR);
+	MVM_DEBUGFS_ADD_FILE(d0i3_refs, mvm->debugfs_dir, S_IRUSR);
 
 #ifdef CONFIG_IWLWIFI_BCAST_FILTERING
 	if (mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_BCAST_FILTERING) {
-- 
cgit v1.2.2


From b77f06d9eccb2edb1ef78c30eb6d38632ed4f196 Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Wed, 6 Nov 2013 10:49:32 +0200
Subject: iwlwifi: mvm: configure WOWLAN_CONFIGURATION on D0i3 entry

We need to ask the fw to wake up on incoming packets (that
pass the filters).

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/fw-api-d3.h |  6 +++++-
 drivers/net/wireless/iwlwifi/mvm/ops.c       | 13 +++++++++++++
 2 files changed, 18 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-d3.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-d3.h
index 8415ff312d0e..521997669c99 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api-d3.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-d3.h
@@ -231,8 +231,12 @@ enum iwl_wowlan_wakeup_filters {
 	IWL_WOWLAN_WAKEUP_RF_KILL_DEASSERT		= BIT(8),
 	IWL_WOWLAN_WAKEUP_REMOTE_LINK_LOSS		= BIT(9),
 	IWL_WOWLAN_WAKEUP_REMOTE_SIGNATURE_TABLE	= BIT(10),
-	/* BIT(11) reserved */
+	IWL_WOWLAN_WAKEUP_REMOTE_TCP_EXTERNAL		= BIT(11),
 	IWL_WOWLAN_WAKEUP_REMOTE_WAKEUP_PACKET		= BIT(12),
+	IWL_WOWLAN_WAKEUP_IOAC_MAGIC_PACKET		= BIT(13),
+	IWL_WOWLAN_WAKEUP_HOST_TIMER			= BIT(14),
+	IWL_WOWLAN_WAKEUP_RX_FRAME			= BIT(15),
+	IWL_WOWLAN_WAKEUP_BCN_FILTERING			= BIT(16),
 }; /* WOWLAN_WAKEUP_FILTER_API_E_VER_4 */
 
 struct iwl_wowlan_config_cmd {
diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c
index 5bc44395fa96..12b81ca91954 100644
--- a/drivers/net/wireless/iwlwifi/mvm/ops.c
+++ b/drivers/net/wireless/iwlwifi/mvm/ops.c
@@ -844,6 +844,13 @@ static int iwl_mvm_enter_d0i3(struct iwl_op_mode *op_mode)
 {
 	struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode);
 	u32 flags = CMD_ASYNC | CMD_HIGH_PRIO | CMD_SEND_IN_IDLE;
+	int ret;
+	struct iwl_wowlan_config_cmd wowlan_config_cmd = {
+		.wakeup_filter = cpu_to_le32(IWL_WOWLAN_WAKEUP_RX_FRAME |
+					     IWL_WOWLAN_WAKEUP_BEACON_MISS |
+					     IWL_WOWLAN_WAKEUP_LINK_CHANGE |
+					     IWL_WOWLAN_WAKEUP_BCN_FILTERING),
+	};
 	struct iwl_d3_manager_config d3_cfg_cmd = {
 		.min_sleep_time = cpu_to_le32(1000),
 	};
@@ -855,6 +862,12 @@ static int iwl_mvm_enter_d0i3(struct iwl_op_mode *op_mode)
 						   iwl_mvm_enter_d0i3_iterator,
 						   mvm);
 
+	ret = iwl_mvm_send_cmd_pdu(mvm, WOWLAN_CONFIGURATION, flags,
+				   sizeof(wowlan_config_cmd),
+				   &wowlan_config_cmd);
+	if (ret)
+		return ret;
+
 	return iwl_mvm_send_cmd_pdu(mvm, D3_CONFIG_CMD,
 				    flags | CMD_MAKE_TRANS_IDLE,
 				    sizeof(d3_cfg_cmd), &d3_cfg_cmd);
-- 
cgit v1.2.2


From 37577fe2499a4d83c39910702959832baf589bab Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Thu, 5 Dec 2013 17:19:39 +0200
Subject: iwlwifi: mvm: get status on D0i3 exit

Schedule work to query the wakeup reasons, and
disconnect in some cases (e.g. beacon loss).

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/mac80211.c |  5 ++
 drivers/net/wireless/iwlwifi/mvm/mvm.h      |  4 ++
 drivers/net/wireless/iwlwifi/mvm/ops.c      | 79 +++++++++++++++++++++++++++--
 drivers/net/wireless/iwlwifi/mvm/sta.c      |  4 ++
 4 files changed, 88 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index 827510ea7eab..59b5b7a80d12 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -547,6 +547,7 @@ static void iwl_mvm_restart_cleanup(struct iwl_mvm *mvm)
 		iwl_mvm_cleanup_iterator, mvm);
 
 	mvm->p2p_device_vif = NULL;
+	mvm->d0i3_ap_sta_id = IWL_MVM_STATION_COUNT;
 
 	iwl_mvm_reset_phy_ctxts(mvm);
 	memset(mvm->fw_key_table, 0, sizeof(mvm->fw_key_table));
@@ -602,6 +603,7 @@ static void iwl_mvm_mac_stop(struct ieee80211_hw *hw)
 {
 	struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw);
 
+	flush_work(&mvm->d0i3_exit_work);
 	flush_work(&mvm->async_handlers_wk);
 
 	mutex_lock(&mvm->mutex);
@@ -1216,6 +1218,9 @@ static void iwl_mvm_bss_info_changed_station(struct iwl_mvm *mvm,
 			ret = iwl_mvm_rm_sta_id(mvm, vif, mvmvif->ap_sta_id);
 			if (ret)
 				IWL_ERR(mvm, "failed to remove AP station\n");
+
+			if (mvm->d0i3_ap_sta_id == mvmvif->ap_sta_id)
+				mvm->d0i3_ap_sta_id = IWL_MVM_STATION_COUNT;
 			mvmvif->ap_sta_id = IWL_MVM_STATION_COUNT;
 			/* remove quota for this interface */
 			ret = iwl_mvm_update_quotas(mvm, NULL);
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index fe3896ca16e7..f3966078935c 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -577,6 +577,10 @@ struct iwl_mvm {
 #endif
 #endif
 
+	/* d0i3 */
+	u8 d0i3_ap_sta_id;
+	struct work_struct d0i3_exit_work;
+
 	/* BT-Coex */
 	u8 bt_kill_msk;
 	struct iwl_bt_coex_profile_notif last_bt_notif;
diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c
index 12b81ca91954..4b7fa7a55c1c 100644
--- a/drivers/net/wireless/iwlwifi/mvm/ops.c
+++ b/drivers/net/wireless/iwlwifi/mvm/ops.c
@@ -326,6 +326,7 @@ static const char *iwl_mvm_cmd_strings[REPLY_MAX] = {
 
 /* this forward declaration can avoid to export the function */
 static void iwl_mvm_async_handlers_wk(struct work_struct *wk);
+static void iwl_mvm_d0i3_exit_work(struct work_struct *wk);
 
 static u32 calc_min_backoff(struct iwl_trans *trans, const struct iwl_cfg *cfg)
 {
@@ -404,6 +405,7 @@ iwl_op_mode_mvm_start(struct iwl_trans *trans, const struct iwl_cfg *cfg,
 	INIT_WORK(&mvm->async_handlers_wk, iwl_mvm_async_handlers_wk);
 	INIT_WORK(&mvm->roc_done_wk, iwl_mvm_roc_done_wk);
 	INIT_WORK(&mvm->sta_drained_wk, iwl_mvm_sta_drained_wk);
+	INIT_WORK(&mvm->d0i3_exit_work, iwl_mvm_d0i3_exit_work);
 
 	SET_IEEE80211_DEV(mvm->hw, mvm->trans->dev);
 
@@ -819,10 +821,18 @@ static void iwl_mvm_cmd_queue_full(struct iwl_op_mode *op_mode)
 	iwl_mvm_nic_restart(mvm);
 }
 
+struct iwl_d0i3_iter_data {
+	struct iwl_mvm *mvm;
+	u8 ap_sta_id;
+	u8 vif_count;
+};
+
 static void iwl_mvm_enter_d0i3_iterator(void *_data, u8 *mac,
 					struct ieee80211_vif *vif)
 {
-	struct iwl_mvm *mvm = _data;
+	struct iwl_d0i3_iter_data *data = _data;
+	struct iwl_mvm *mvm = data->mvm;
+	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
 	u32 flags = CMD_ASYNC | CMD_HIGH_PRIO | CMD_SEND_IN_IDLE;
 
 	IWL_DEBUG_RPM(mvm, "entering D0i3 - vif %pM\n", vif->addr);
@@ -838,6 +848,8 @@ static void iwl_mvm_enter_d0i3_iterator(void *_data, u8 *mac,
 	 * reconfigure them (we might want to use different
 	 * params later on, though).
 	 */
+	data->ap_sta_id = mvmvif->ap_sta_id;
+	data->vif_count++;
 }
 
 static int iwl_mvm_enter_d0i3(struct iwl_op_mode *op_mode)
@@ -845,6 +857,9 @@ static int iwl_mvm_enter_d0i3(struct iwl_op_mode *op_mode)
 	struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode);
 	u32 flags = CMD_ASYNC | CMD_HIGH_PRIO | CMD_SEND_IN_IDLE;
 	int ret;
+	struct iwl_d0i3_iter_data d0i3_iter_data = {
+		.mvm = mvm,
+	};
 	struct iwl_wowlan_config_cmd wowlan_config_cmd = {
 		.wakeup_filter = cpu_to_le32(IWL_WOWLAN_WAKEUP_RX_FRAME |
 					     IWL_WOWLAN_WAKEUP_BEACON_MISS |
@@ -860,7 +875,13 @@ static int iwl_mvm_enter_d0i3(struct iwl_op_mode *op_mode)
 	ieee80211_iterate_active_interfaces_atomic(mvm->hw,
 						   IEEE80211_IFACE_ITER_NORMAL,
 						   iwl_mvm_enter_d0i3_iterator,
-						   mvm);
+						   &d0i3_iter_data);
+	if (d0i3_iter_data.vif_count == 1) {
+		mvm->d0i3_ap_sta_id = d0i3_iter_data.ap_sta_id;
+	} else {
+		WARN_ON_ONCE(d0i3_iter_data.vif_count > 1);
+		mvm->d0i3_ap_sta_id = IWL_MVM_STATION_COUNT;
+	}
 
 	ret = iwl_mvm_send_cmd_pdu(mvm, WOWLAN_CONFIGURATION, flags,
 				   sizeof(wowlan_config_cmd),
@@ -887,6 +908,54 @@ static void iwl_mvm_exit_d0i3_iterator(void *_data, u8 *mac,
 	iwl_mvm_update_d0i3_power_mode(mvm, vif, false, flags);
 }
 
+static void iwl_mvm_d0i3_disconnect_iter(void *data, u8 *mac,
+					 struct ieee80211_vif *vif)
+{
+	struct iwl_mvm *mvm = data;
+	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
+
+	if (vif->type == NL80211_IFTYPE_STATION && vif->bss_conf.assoc &&
+	    mvm->d0i3_ap_sta_id == mvmvif->ap_sta_id)
+		ieee80211_connection_loss(vif);
+}
+
+static void iwl_mvm_d0i3_exit_work(struct work_struct *wk)
+{
+	struct iwl_mvm *mvm = container_of(wk, struct iwl_mvm, d0i3_exit_work);
+	struct iwl_host_cmd get_status_cmd = {
+		.id = WOWLAN_GET_STATUSES,
+		.flags = CMD_SYNC | CMD_HIGH_PRIO | CMD_WANT_SKB,
+	};
+	struct iwl_wowlan_status_v6 *status;
+	int ret;
+	u32 disconnection_reasons, wakeup_reasons;
+
+	mutex_lock(&mvm->mutex);
+	ret = iwl_mvm_send_cmd(mvm, &get_status_cmd);
+	if (ret)
+		goto out;
+
+	if (!get_status_cmd.resp_pkt)
+		goto out;
+
+	status = (void *)get_status_cmd.resp_pkt->data;
+	wakeup_reasons = le32_to_cpu(status->wakeup_reasons);
+
+	IWL_DEBUG_RPM(mvm, "wakeup reasons: 0x%x\n", wakeup_reasons);
+
+	disconnection_reasons =
+		IWL_WOWLAN_WAKEUP_BY_DISCONNECTION_ON_MISSED_BEACON |
+		IWL_WOWLAN_WAKEUP_BY_DISCONNECTION_ON_DEAUTH;
+	if (wakeup_reasons & disconnection_reasons)
+		ieee80211_iterate_active_interfaces(
+			mvm->hw, IEEE80211_IFACE_ITER_NORMAL,
+			iwl_mvm_d0i3_disconnect_iter, mvm);
+
+	iwl_free_resp(&get_status_cmd);
+out:
+	mutex_unlock(&mvm->mutex);
+}
+
 static int iwl_mvm_exit_d0i3(struct iwl_op_mode *op_mode)
 {
 	struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode);
@@ -898,13 +967,15 @@ static int iwl_mvm_exit_d0i3(struct iwl_op_mode *op_mode)
 
 	ret = iwl_mvm_send_cmd_pdu(mvm, D0I3_END_CMD, flags, 0, NULL);
 	if (ret)
-		return ret;
+		goto out;
 
 	ieee80211_iterate_active_interfaces_atomic(mvm->hw,
 						   IEEE80211_IFACE_ITER_NORMAL,
 						   iwl_mvm_exit_d0i3_iterator,
 						   mvm);
-	return 0;
+out:
+	schedule_work(&mvm->d0i3_exit_work);
+	return ret;
 }
 
 static const struct iwl_op_mode_ops iwl_mvm_ops = {
diff --git a/drivers/net/wireless/iwlwifi/mvm/sta.c b/drivers/net/wireless/iwlwifi/mvm/sta.c
index af94f75c3999..fb416c5d4a63 100644
--- a/drivers/net/wireless/iwlwifi/mvm/sta.c
+++ b/drivers/net/wireless/iwlwifi/mvm/sta.c
@@ -522,6 +522,10 @@ int iwl_mvm_rm_sta(struct iwl_mvm *mvm,
 
 		/* unassoc - go ahead - remove the AP STA now */
 		mvmvif->ap_sta_id = IWL_MVM_STATION_COUNT;
+
+		/* clear d0i3_ap_sta_id if no longer relevant */
+		if (mvm->d0i3_ap_sta_id == mvm_sta->sta_id)
+			mvm->d0i3_ap_sta_id = IWL_MVM_STATION_COUNT;
 	}
 
 	/*
-- 
cgit v1.2.2


From 0eb8365305d43bdfde9e064dec4d82c743fa5c38 Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Mon, 11 Nov 2013 18:56:35 +0200
Subject: iwlwifi: mvm: add debugfs hook to take an mvm ref

Support taking an mvm ref (and preventing D0i3) by
writing '1' into the d0i3_refs debugfs file.

The reference can be unref by writing 0 to the same
file.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/debugfs.c | 33 ++++++++++++++++++++++++++++--
 drivers/net/wireless/iwlwifi/mvm/mvm.h     |  1 +
 2 files changed, 32 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/debugfs.c b/drivers/net/wireless/iwlwifi/mvm/debugfs.c
index 2253d5b2a59c..c116765ebe42 100644
--- a/drivers/net/wireless/iwlwifi/mvm/debugfs.c
+++ b/drivers/net/wireless/iwlwifi/mvm/debugfs.c
@@ -862,10 +862,39 @@ static ssize_t iwl_dbgfs_d0i3_refs_read(struct file *file,
 	PRINT_MVM_REF(IWL_MVM_REF_ROC);
 	PRINT_MVM_REF(IWL_MVM_REF_P2P_CLIENT);
 	PRINT_MVM_REF(IWL_MVM_REF_AP_IBSS);
+	PRINT_MVM_REF(IWL_MVM_REF_USER);
 
 	return simple_read_from_buffer(user_buf, count, ppos, buf, pos);
 }
 
+static ssize_t iwl_dbgfs_d0i3_refs_write(struct iwl_mvm *mvm, char *buf,
+					 size_t count, loff_t *ppos)
+{
+	unsigned long value;
+	int ret;
+	bool taken;
+
+	ret = kstrtoul(buf, 10, &value);
+	if (ret < 0)
+		return ret;
+
+	mutex_lock(&mvm->mutex);
+
+	taken = test_bit(IWL_MVM_REF_USER, mvm->ref_bitmap);
+	if (value == 1 && !taken)
+		iwl_mvm_ref(mvm, IWL_MVM_REF_USER);
+	else if (value == 0 && taken)
+		iwl_mvm_unref(mvm, IWL_MVM_REF_USER);
+	else
+		ret = -EINVAL;
+
+	mutex_unlock(&mvm->mutex);
+
+	if (ret < 0)
+		return ret;
+	return count;
+}
+
 #define MVM_DEBUGFS_WRITE_FILE_OPS(name, bufsz) \
 	_MVM_DEBUGFS_WRITE_FILE_OPS(name, bufsz, struct iwl_mvm)
 #define MVM_DEBUGFS_READ_WRITE_FILE_OPS(name, bufsz) \
@@ -890,7 +919,7 @@ MVM_DEBUGFS_READ_FILE_OPS(fw_rx_stats);
 MVM_DEBUGFS_WRITE_FILE_OPS(fw_restart, 10);
 MVM_DEBUGFS_WRITE_FILE_OPS(fw_nmi, 10);
 MVM_DEBUGFS_READ_WRITE_FILE_OPS(scan_ant_rxchain, 8);
-MVM_DEBUGFS_READ_FILE_OPS(d0i3_refs);
+MVM_DEBUGFS_READ_WRITE_FILE_OPS(d0i3_refs, 8);
 
 #ifdef CONFIG_IWLWIFI_BCAST_FILTERING
 MVM_DEBUGFS_READ_WRITE_FILE_OPS(bcast_filters, 256);
@@ -922,7 +951,7 @@ int iwl_mvm_dbgfs_register(struct iwl_mvm *mvm, struct dentry *dbgfs_dir)
 	MVM_DEBUGFS_ADD_FILE(fw_nmi, mvm->debugfs_dir, S_IWUSR);
 	MVM_DEBUGFS_ADD_FILE(scan_ant_rxchain, mvm->debugfs_dir,
 			     S_IWUSR | S_IRUSR);
-	MVM_DEBUGFS_ADD_FILE(d0i3_refs, mvm->debugfs_dir, S_IRUSR);
+	MVM_DEBUGFS_ADD_FILE(d0i3_refs, mvm->debugfs_dir, S_IRUSR | S_IWUSR);
 
 #ifdef CONFIG_IWLWIFI_BCAST_FILTERING
 	if (mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_BCAST_FILTERING) {
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index f3966078935c..1f53adeeba8b 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -245,6 +245,7 @@ enum iwl_mvm_ref_type {
 	IWL_MVM_REF_ROC,
 	IWL_MVM_REF_P2P_CLIENT,
 	IWL_MVM_REF_AP_IBSS,
+	IWL_MVM_REF_USER,
 
 	IWL_MVM_REF_COUNT,
 };
-- 
cgit v1.2.2


From 5c0950c377c1fed65fc26062b4111e33490c823e Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Wed, 29 Jan 2014 15:34:11 +0100
Subject: iwlwifi: mvm: remove unneeded calculations

In iwl_mvm_calc_rssi() some values are calculated but then
never used, remove the calculations.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/rx.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/rx.c b/drivers/net/wireless/iwlwifi/mvm/rx.c
index a85b60f7e67e..ef727df84da7 100644
--- a/drivers/net/wireless/iwlwifi/mvm/rx.c
+++ b/drivers/net/wireless/iwlwifi/mvm/rx.c
@@ -129,22 +129,16 @@ static void iwl_mvm_calc_rssi(struct iwl_mvm *mvm,
 			      struct ieee80211_rx_status *rx_status)
 {
 	int rssi_a, rssi_b, rssi_a_dbm, rssi_b_dbm, max_rssi_dbm;
-	int rssi_all_band_a, rssi_all_band_b;
-	u32 agc_a, agc_b, max_agc;
+	u32 agc_a, agc_b;
 	u32 val;
 
 	val = le32_to_cpu(phy_info->non_cfg_phy[IWL_RX_INFO_AGC_IDX]);
 	agc_a = (val & IWL_OFDM_AGC_A_MSK) >> IWL_OFDM_AGC_A_POS;
 	agc_b = (val & IWL_OFDM_AGC_B_MSK) >> IWL_OFDM_AGC_B_POS;
-	max_agc = max_t(u32, agc_a, agc_b);
 
 	val = le32_to_cpu(phy_info->non_cfg_phy[IWL_RX_INFO_RSSI_AB_IDX]);
 	rssi_a = (val & IWL_OFDM_RSSI_INBAND_A_MSK) >> IWL_OFDM_RSSI_A_POS;
 	rssi_b = (val & IWL_OFDM_RSSI_INBAND_B_MSK) >> IWL_OFDM_RSSI_B_POS;
-	rssi_all_band_a = (val & IWL_OFDM_RSSI_ALLBAND_A_MSK) >>
-				IWL_OFDM_RSSI_ALLBAND_A_POS;
-	rssi_all_band_b = (val & IWL_OFDM_RSSI_ALLBAND_B_MSK) >>
-				IWL_OFDM_RSSI_ALLBAND_B_POS;
 
 	/*
 	 * dBm = rssi dB - agc dB - constant.
-- 
cgit v1.2.2


From 034846cfd23e00a70b48363d70dccc3f8d537053 Mon Sep 17 00:00:00 2001
From: Eran Harary <eran.harary@intel.com>
Date: Wed, 29 Jan 2014 08:10:17 +0200
Subject: iwlwifi: mvm: support multiple firmware sections

Newer devices have two embedded CPUs, and the firwmare for
both of them is include in the .ucode file requested upon
enumeration.
An empty section with address=0xFFFFCCCC separates between
the sections intended for cpu1 and the sections intended
for cpu2.
Update the driver to parse the .ucode file with this format
and act accordingly.

Signed-off-by: Eran Harary <eran.harary@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-fw.h     |  3 +-
 drivers/net/wireless/iwlwifi/pcie/trans.c | 69 ++++++++++++++++++++-----------
 2 files changed, 47 insertions(+), 25 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-fw.h b/drivers/net/wireless/iwlwifi/iwl-fw.h
index b0090e8dff52..f80ba586c253 100644
--- a/drivers/net/wireless/iwlwifi/iwl-fw.h
+++ b/drivers/net/wireless/iwlwifi/iwl-fw.h
@@ -164,8 +164,7 @@ enum iwl_ucode_sec {
  * For 16.0 uCode and above, there is no differentiation between sections,
  * just an offset to the HW address.
  */
-#define IWL_UCODE_SECTION_MAX 6
-#define IWL_UCODE_FIRST_SECTION_OF_SECOND_CPU	(IWL_UCODE_SECTION_MAX/2)
+#define IWL_UCODE_SECTION_MAX 12
 
 struct iwl_ucode_capabilities {
 	u32 max_probe_length;
diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c
index 61ae1af34f17..84d471299e5a 100644
--- a/drivers/net/wireless/iwlwifi/pcie/trans.c
+++ b/drivers/net/wireless/iwlwifi/pcie/trans.c
@@ -89,6 +89,7 @@ static void iwl_pcie_set_pwr(struct iwl_trans *trans, bool vaux)
 
 /* PCI registers */
 #define PCI_CFG_RETRY_TIMEOUT	0x041
+#define CPU1_CPU2_SEPARATOR_SECTION	0xFFFFCCCC
 
 static void iwl_pcie_apm_config(struct iwl_trans *trans)
 {
@@ -443,26 +444,33 @@ static int iwl_pcie_load_section(struct iwl_trans *trans, u8 section_num,
 
 static int iwl_pcie_load_cpu_secured_sections(struct iwl_trans *trans,
 					      const struct fw_img *image,
-					      int cpu)
+					      int cpu,
+					      int *first_ucode_section)
 {
 	int shift_param;
-	u32 first_idx, last_idx;
 	int i, ret = 0;
+	u32 last_read_idx = 0;
 
 	if (cpu == 1) {
 		shift_param = 0;
-		first_idx = 0;
-		last_idx = 2;
+		*first_ucode_section = 0;
 	} else {
 		shift_param = 16;
-		first_idx = 3;
-		last_idx = 5;
+		(*first_ucode_section)++;
 	}
 
-	for (i = first_idx; i <= last_idx; i++) {
-		if (!image->sec[i].data)
+	for (i = *first_ucode_section; i < IWL_UCODE_SECTION_MAX; i++) {
+		last_read_idx = i;
+
+		if (!image->sec[i].data ||
+		    image->sec[i].offset == CPU1_CPU2_SEPARATOR_SECTION) {
+			IWL_DEBUG_FW(trans,
+				     "Break since Data not valid or Empty section, sec = %d\n",
+				     i);
 			break;
-		if (i == first_idx + 1)
+		}
+
+		if (i == (*first_ucode_section) + 1)
 			/* set CPU to started */
 			iwl_set_bits_prph(trans,
 					  CSR_UCODE_LOAD_STATUS_ADDR,
@@ -478,30 +486,39 @@ static int iwl_pcie_load_cpu_secured_sections(struct iwl_trans *trans,
 			  CSR_UCODE_LOAD_STATUS_ADDR,
 			  LMPM_CPU_UCODE_LOADING_COMPLETED << shift_param);
 
+	*first_ucode_section = last_read_idx;
+
 	return 0;
 }
 
 static int iwl_pcie_load_cpu_sections(struct iwl_trans *trans,
 				      const struct fw_img *image,
-				      int cpu)
+				      int cpu,
+				      int *first_ucode_section)
 {
 	int shift_param;
-	u32 first_idx, last_idx;
 	int i, ret = 0;
+	u32 last_read_idx = 0;
 
 	if (cpu == 1) {
 		shift_param = 0;
-		first_idx = 0;
-		last_idx = 1;
+		*first_ucode_section = 0;
 	} else {
 		shift_param = 16;
-		first_idx = 2;
-		last_idx = 3;
+		(*first_ucode_section)++;
 	}
 
-	for (i = first_idx; i <= last_idx; i++) {
-		if (!image->sec[i].data)
+	for (i = *first_ucode_section; i < IWL_UCODE_SECTION_MAX; i++) {
+		last_read_idx = i;
+
+		if (!image->sec[i].data ||
+		    image->sec[i].offset == CPU1_CPU2_SEPARATOR_SECTION) {
+			IWL_DEBUG_FW(trans,
+				     "Break since Data not valid or Empty section, sec = %d\n",
+				     i);
 			break;
+		}
+
 		ret = iwl_pcie_load_section(trans, i, &image->sec[i]);
 		if (ret)
 			return ret;
@@ -515,6 +532,8 @@ static int iwl_pcie_load_cpu_sections(struct iwl_trans *trans,
 				   LMPM_CPU_UCODE_LOADING_STARTED) <<
 					shift_param);
 
+	*first_ucode_section = last_read_idx;
+
 	return 0;
 }
 
@@ -522,6 +541,7 @@ static int iwl_pcie_load_given_ucode(struct iwl_trans *trans,
 				const struct fw_img *image)
 {
 	int ret = 0;
+	int first_ucode_section;
 
 	IWL_DEBUG_FW(trans,
 		     "working with %s image\n",
@@ -547,13 +567,15 @@ static int iwl_pcie_load_given_ucode(struct iwl_trans *trans,
 			       LMPM_SECURE_CPU1_HDR_MEM_SPACE);
 
 		/* load to FW the binary Secured sections of CPU1 */
-		ret = iwl_pcie_load_cpu_secured_sections(trans, image, 1);
+		ret = iwl_pcie_load_cpu_secured_sections(trans, image, 1,
+							 &first_ucode_section);
 		if (ret)
 			return ret;
 
 	} else {
 		/* load to FW the binary Non secured sections of CPU1 */
-		ret = iwl_pcie_load_cpu_sections(trans, image, 1);
+		ret = iwl_pcie_load_cpu_sections(trans, image, 1,
+						 &first_ucode_section);
 		if (ret)
 			return ret;
 	}
@@ -566,11 +588,12 @@ static int iwl_pcie_load_given_ucode(struct iwl_trans *trans,
 
 		/* load to FW the binary sections of CPU2 */
 		if (image->is_secure)
-			ret = iwl_pcie_load_cpu_secured_sections(trans,
-								 image,
-								 2);
+			ret = iwl_pcie_load_cpu_secured_sections(
+							trans, image, 2,
+							&first_ucode_section);
 		else
-			ret = iwl_pcie_load_cpu_sections(trans, image, 2);
+			ret = iwl_pcie_load_cpu_sections(trans, image, 2,
+							 &first_ucode_section);
 		if (ret)
 			return ret;
 	}
-- 
cgit v1.2.2


From 84b0312eee685bd0b2ca250dcea7049c8be4b655 Mon Sep 17 00:00:00 2001
From: Liad Kaufman <liad.kaufman@intel.com>
Date: Mon, 27 Jan 2014 16:34:23 +0200
Subject: iwlwifi: fix potential buffer overrun in fw name

Fix a potential buffer overrun when creating the fw name
in drv->firmware_name by setting a maximal length to the
char array copied to it.
The maximal length is also updated to 32 rather than 25 to
keep both 32bit and 64bit alignment without requiring
padding to the struct it is in.

Signed-off-by: Liad Kaufman <liad.kaufman@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-drv.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-drv.c b/drivers/net/wireless/iwlwifi/iwl-drv.c
index c3728163be46..b3bc30b4292b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-drv.c
+++ b/drivers/net/wireless/iwlwifi/iwl-drv.c
@@ -128,7 +128,7 @@ struct iwl_drv {
 	const struct iwl_cfg *cfg;
 
 	int fw_index;                   /* firmware we're trying to load */
-	char firmware_name[25];         /* name of firmware file to load */
+	char firmware_name[32];         /* name of firmware file to load */
 
 	struct completion request_firmware_complete;
 
@@ -237,7 +237,8 @@ static int iwl_request_firmware(struct iwl_drv *drv, bool first)
 		return -ENOENT;
 	}
 
-	sprintf(drv->firmware_name, "%s%s%s", name_pre, tag, ".ucode");
+	snprintf(drv->firmware_name, sizeof(drv->firmware_name), "%s%s.ucode",
+		 name_pre, tag);
 
 	IWL_DEBUG_INFO(drv, "attempting to load firmware %s'%s'\n",
 		       (drv->fw_index == UCODE_EXPERIMENTAL_INDEX)
-- 
cgit v1.2.2


From a6623e84c4242942a988a810d1f5e6e7e2a36858 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Mon, 27 Jan 2014 15:40:53 +0100
Subject: iwlwifi: mvm: abort scheduled scan on scan request

Some older versions of wpa_supplicant don't necessarily stop
scheduled scan before starting a regular scan, and there's
nothing in the API that requires it either. As a consequence
our driver's behaviour of not allowing scan while scheduled
scan was in progress broke userspace.

However, it is valid to unilaterally stop scheduled scan at
any point in time, so when a regular scan request comes just
abort the scheduled scan and run the regular scan.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Alexander Bondar <alexander.bondar@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/mac80211.c | 25 ++++++++++++++++++++++++-
 drivers/net/wireless/iwlwifi/mvm/ops.c      |  2 +-
 drivers/net/wireless/iwlwifi/mvm/scan.c     |  7 ++++++-
 3 files changed, 31 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index 59b5b7a80d12..9d9a2d061cbb 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -1449,6 +1449,8 @@ static int iwl_mvm_mac_hw_scan(struct ieee80211_hw *hw,
 			       struct cfg80211_scan_request *req)
 {
 	struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw);
+	struct iwl_notification_wait wait_scan_done;
+	static const u8 scan_done_notif[] = { SCAN_OFFLOAD_COMPLETE, };
 	int ret;
 
 	if (req->n_channels == 0 || req->n_channels > MAX_NUM_SCAN_CHANNELS)
@@ -1456,7 +1458,28 @@ static int iwl_mvm_mac_hw_scan(struct ieee80211_hw *hw,
 
 	mutex_lock(&mvm->mutex);
 
-	if (mvm->scan_status != IWL_MVM_SCAN_NONE) {
+	switch (mvm->scan_status) {
+	case IWL_MVM_SCAN_SCHED:
+		iwl_init_notification_wait(&mvm->notif_wait, &wait_scan_done,
+					   scan_done_notif,
+					   ARRAY_SIZE(scan_done_notif),
+					   NULL, NULL);
+		iwl_mvm_sched_scan_stop(mvm);
+		ret = iwl_wait_notification(&mvm->notif_wait,
+					    &wait_scan_done, HZ);
+		if (ret) {
+			ret = -EBUSY;
+			goto out;
+		}
+		/* iwl_mvm_rx_scan_offload_complete_notif() will be called
+		 * soon but will not reset the scan status as it won't be
+		 * IWL_MVM_SCAN_SCHED any more since we queue the next scan
+		 * immediately (below)
+		 */
+		break;
+	case IWL_MVM_SCAN_NONE:
+		break;
+	default:
 		ret = -EBUSY;
 		goto out;
 	}
diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c
index 4b7fa7a55c1c..e268c15e5fea 100644
--- a/drivers/net/wireless/iwlwifi/mvm/ops.c
+++ b/drivers/net/wireless/iwlwifi/mvm/ops.c
@@ -228,7 +228,7 @@ static const struct iwl_rx_handlers iwl_mvm_rx_handlers[] = {
 	RX_HANDLER(SCAN_REQUEST_CMD, iwl_mvm_rx_scan_response, false),
 	RX_HANDLER(SCAN_COMPLETE_NOTIFICATION, iwl_mvm_rx_scan_complete, false),
 	RX_HANDLER(SCAN_OFFLOAD_COMPLETE,
-		   iwl_mvm_rx_scan_offload_complete_notif, false),
+		   iwl_mvm_rx_scan_offload_complete_notif, true),
 	RX_HANDLER(MATCH_FOUND_NOTIFICATION, iwl_mvm_rx_sched_scan_results,
 		   false),
 
diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c
index 8477902a9183..a827a13f9873 100644
--- a/drivers/net/wireless/iwlwifi/mvm/scan.c
+++ b/drivers/net/wireless/iwlwifi/mvm/scan.c
@@ -511,11 +511,16 @@ int iwl_mvm_rx_scan_offload_complete_notif(struct iwl_mvm *mvm,
 	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	struct iwl_scan_offload_complete *scan_notif = (void *)pkt->data;
 
+	/* scan status must be locked for proper checking */
+	lockdep_assert_held(&mvm->mutex);
+
 	IWL_DEBUG_SCAN(mvm, "Scheduled scan completed, status %s\n",
 		       scan_notif->status == IWL_SCAN_OFFLOAD_COMPLETED ?
 		       "completed" : "aborted");
 
-	mvm->scan_status = IWL_MVM_SCAN_NONE;
+	/* might already be something else again, don't reset if so */
+	if (mvm->scan_status == IWL_MVM_SCAN_SCHED)
+		mvm->scan_status = IWL_MVM_SCAN_NONE;
 	ieee80211_sched_scan_stopped(mvm->hw);
 
 	return 0;
-- 
cgit v1.2.2


From 09d95db20baa37a277ace55b7584199cecdfdce6 Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Thu, 30 Jan 2014 13:35:35 +0200
Subject: iwlwifi: fix kerneldoc format

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-op-mode.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-op-mode.h b/drivers/net/wireless/iwlwifi/iwl-op-mode.h
index f83b244b01ef..5d78207040b0 100644
--- a/drivers/net/wireless/iwlwifi/iwl-op-mode.h
+++ b/drivers/net/wireless/iwlwifi/iwl-op-mode.h
@@ -159,7 +159,7 @@ void iwl_opmode_deregister(const char *name);
 
 /**
  * struct iwl_op_mode - operational mode
- * @ops - pointer to its own ops
+ * @ops: pointer to its own ops
  *
  * This holds an implementation of the mac80211 / fw API.
  */
-- 
cgit v1.2.2


From 741e703b58819d8e7c743a9cab7e2f98a1264a67 Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Mon, 27 Jan 2014 12:12:50 +0200
Subject: iwlwifi: mvm: BT Coex - fix SYNC2SCO flags

The Sync to SCO is a feature that allows to synchronize
between the WiFi traffic and the expectable BT traffic
when SCO profile is active.
We need to set the validity bit in the command in the init
flow, and set / clear the enablement bit if we want to
enabled / disable the feature.

While at it, clean up the flags that are not used in the
API.

This feature needs to be enabled / disabled easily, so
export its enablement to constants.h.

Reviewed-by: Eyal Zolotov <eyal.zolotov@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/bt-coex.c        |  4 +++-
 drivers/net/wireless/iwlwifi/mvm/constants.h      |  1 +
 drivers/net/wireless/iwlwifi/mvm/fw-api-bt-coex.h | 17 ++---------------
 3 files changed, 6 insertions(+), 16 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/bt-coex.c b/drivers/net/wireless/iwlwifi/mvm/bt-coex.c
index 9649a43c854d..38a54a3fde34 100644
--- a/drivers/net/wireless/iwlwifi/mvm/bt-coex.c
+++ b/drivers/net/wireless/iwlwifi/mvm/bt-coex.c
@@ -378,7 +378,6 @@ int iwl_send_bt_init_conf(struct iwl_mvm *mvm)
 
 	flags = iwlwifi_mod_params.bt_coex_active ?
 			BT_COEX_NW : BT_COEX_DISABLE;
-	flags |= BT_CH_PRIMARY_EN | BT_CH_SECONDARY_EN | BT_SYNC_2_BT_DISABLE;
 	bt_cmd->flags = cpu_to_le32(flags);
 
 	bt_cmd->valid_bit_msk = cpu_to_le32(BT_VALID_ENABLE |
@@ -399,6 +398,9 @@ int iwl_send_bt_init_conf(struct iwl_mvm *mvm)
 					    BT_VALID_TXRX_MAX_FREQ_0 |
 					    BT_VALID_SYNC_TO_SCO);
 
+	if (IWL_MVM_BT_COEX_SYNC2SCO)
+		bt_cmd->flags |= cpu_to_le32(BT_COEX_SYNC2SCO);
+
 	if (mvm->cfg->bt_shared_single_ant)
 		memcpy(&bt_cmd->decision_lut, iwl_single_shared_ant,
 		       sizeof(iwl_single_shared_ant));
diff --git a/drivers/net/wireless/iwlwifi/mvm/constants.h b/drivers/net/wireless/iwlwifi/mvm/constants.h
index f3b96e44e690..2d133b1b2dde 100644
--- a/drivers/net/wireless/iwlwifi/mvm/constants.h
+++ b/drivers/net/wireless/iwlwifi/mvm/constants.h
@@ -81,5 +81,6 @@
 #define IWL_MVM_LOWLAT_QUOTA_MIN_PERCENT	64
 #define IWL_MVM_LOWLAT_SINGLE_BINDING_MAXDUR	24 /* TU */
 #define IWL_MVM_LOWLAT_DUAL_BINDING_MAXDUR	24 /* TU */
+#define IWL_MVM_BT_COEX_SYNC2SCO		1
 
 #endif /* __MVM_CONSTANTS_H */
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-bt-coex.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-bt-coex.h
index 1b4e54d416b0..20b723d6270f 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api-bt-coex.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-bt-coex.h
@@ -70,37 +70,24 @@
 
 /**
  * enum iwl_bt_coex_flags - flags for BT_COEX command
- * @BT_CH_PRIMARY_EN:
- * @BT_CH_SECONDARY_EN:
- * @BT_NOTIF_COEX_OFF:
  * @BT_COEX_MODE_POS:
  * @BT_COEX_MODE_MSK:
  * @BT_COEX_DISABLE:
  * @BT_COEX_2W:
  * @BT_COEX_3W:
  * @BT_COEX_NW:
- * @BT_USE_DEFAULTS:
- * @BT_SYNC_2_BT_DISABLE:
- * @BT_COEX_CORUNNING_TBL_EN:
+ * @BT_COEX_SYNC2SCO:
  *
  * The COEX_MODE must be set for each command. Even if it is not changed.
  */
 enum iwl_bt_coex_flags {
-	BT_CH_PRIMARY_EN		= BIT(0),
-	BT_CH_SECONDARY_EN		= BIT(1),
-	BT_NOTIF_COEX_OFF		= BIT(2),
 	BT_COEX_MODE_POS		= 3,
 	BT_COEX_MODE_MSK		= BITS(3) << BT_COEX_MODE_POS,
 	BT_COEX_DISABLE			= 0x0 << BT_COEX_MODE_POS,
 	BT_COEX_2W			= 0x1 << BT_COEX_MODE_POS,
 	BT_COEX_3W			= 0x2 << BT_COEX_MODE_POS,
 	BT_COEX_NW			= 0x3 << BT_COEX_MODE_POS,
-	BT_USE_DEFAULTS			= BIT(6),
-	BT_SYNC_2_BT_DISABLE		= BIT(7),
-	BT_COEX_CORUNNING_TBL_EN	= BIT(8),
-	BT_COEX_MPLUT_TBL_EN		= BIT(9),
-	/* Bit 10 is reserved */
-	BT_COEX_WF_PRIO_BOOST_CHECK_EN	= BIT(11),
+	BT_COEX_SYNC2SCO		= BIT(7),
 };
 
 /*
-- 
cgit v1.2.2


From 863230dadcf6b1efb8a342875ade19d00da3b456 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Wed, 4 Dec 2013 17:08:40 +0100
Subject: iwlwifi: mvm: clean up iwl_mvm_bss_info_changed_ap_ibss

Remove the enum abuse (using an enum to store a set of values),
the unneeded ret variable and unnecessary if nesting.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/mac80211.c | 20 +++++++-------------
 1 file changed, 7 insertions(+), 13 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index 9d9a2d061cbb..3ef7d78b9e00 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -1397,26 +1397,20 @@ iwl_mvm_bss_info_changed_ap_ibss(struct iwl_mvm *mvm,
 				 u32 changes)
 {
 	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
-	enum ieee80211_bss_change ht_change = BSS_CHANGED_ERP_CTS_PROT |
-					      BSS_CHANGED_HT |
-					      BSS_CHANGED_BANDWIDTH;
-	int ret;
 
 	/* Changes will be applied when the AP/IBSS is started */
 	if (!mvmvif->ap_ibss_active)
 		return;
 
-	if (changes & ht_change) {
-		ret = iwl_mvm_mac_ctxt_changed(mvm, vif);
-		if (ret)
-			IWL_ERR(mvm, "failed to update MAC %pM\n", vif->addr);
-	}
+	if (changes & (BSS_CHANGED_ERP_CTS_PROT | BSS_CHANGED_HT |
+		       BSS_CHANGED_BANDWIDTH) &&
+	    iwl_mvm_mac_ctxt_changed(mvm, vif))
+		IWL_ERR(mvm, "failed to update MAC %pM\n", vif->addr);
 
 	/* Need to send a new beacon template to the FW */
-	if (changes & BSS_CHANGED_BEACON) {
-		if (iwl_mvm_mac_ctxt_beacon_changed(mvm, vif))
-			IWL_WARN(mvm, "Failed updating beacon data\n");
-	}
+	if (changes & BSS_CHANGED_BEACON &&
+	    iwl_mvm_mac_ctxt_beacon_changed(mvm, vif))
+		IWL_WARN(mvm, "Failed updating beacon data\n");
 }
 
 static void iwl_mvm_bss_info_changed(struct ieee80211_hw *hw,
-- 
cgit v1.2.2


From 8e305d171ab58dbd79ad8e13d93db2237fde5749 Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Thu, 30 Jan 2014 15:25:39 +0200
Subject: iwlwifi: mvm: remove duplicate assignment to ap_ibss_active

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/mac80211.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index 3ef7d78b9e00..43dd64409fc5 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -1314,8 +1314,6 @@ static int iwl_mvm_start_ap_ibss(struct ieee80211_hw *hw,
 	if (ret)
 		goto out_remove;
 
-	mvmvif->ap_ibss_active = true;
-
 	/* Send the bcast station. At this stage the TBTT and DTIM time events
 	 * are added and applied to the scheduler */
 	ret = iwl_mvm_send_bcast_sta(mvm, vif, &mvmvif->bcast_sta);
-- 
cgit v1.2.2


From d623d24a77b266caf46aa3652baadb646576e89a Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Sun, 26 Jan 2014 12:58:24 +0200
Subject: iwlwifi: mvm: clean up in power code

Reduce indentation where it is possible.
Make a function static - it wasn't used outside its file
anyway.
Remove the unneeded pm_prevent state.

Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/mvm.h   |  5 ---
 drivers/net/wireless/iwlwifi/mvm/power.c | 61 ++++++++++++++------------------
 2 files changed, 27 insertions(+), 39 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index 1f53adeeba8b..93e6c18537e1 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -353,8 +353,6 @@ struct iwl_mvm_vif {
 
 	/* FW identified misbehaving AP */
 	u8 uapsd_misbehaving_bssid[ETH_ALEN];
-
-	bool pm_prevented;
 };
 
 static inline struct iwl_mvm_vif *
@@ -943,9 +941,6 @@ int iwl_mvm_enable_beacon_filter(struct iwl_mvm *mvm,
 int iwl_mvm_disable_beacon_filter(struct iwl_mvm *mvm,
 				  struct ieee80211_vif *vif,
 				  u32 flags);
-int iwl_mvm_beacon_filter_send_cmd(struct iwl_mvm *mvm,
-				   struct iwl_beacon_filter_cmd *cmd,
-				   u32 flags);
 int iwl_mvm_update_beacon_abort(struct iwl_mvm *mvm,
 				struct ieee80211_vif *vif, bool enable);
 int iwl_mvm_update_beacon_filter(struct iwl_mvm *mvm,
diff --git a/drivers/net/wireless/iwlwifi/mvm/power.c b/drivers/net/wireless/iwlwifi/mvm/power.c
index b20771c5e84b..f9ddd798ccd5 100644
--- a/drivers/net/wireless/iwlwifi/mvm/power.c
+++ b/drivers/net/wireless/iwlwifi/mvm/power.c
@@ -74,40 +74,36 @@
 
 #define POWER_KEEP_ALIVE_PERIOD_SEC    25
 
+static
 int iwl_mvm_beacon_filter_send_cmd(struct iwl_mvm *mvm,
 				   struct iwl_beacon_filter_cmd *cmd,
 				   u32 flags)
 {
-	int ret;
-
-	ret = iwl_mvm_send_cmd_pdu(mvm, REPLY_BEACON_FILTERING_CMD, flags,
-				   sizeof(struct iwl_beacon_filter_cmd), cmd);
-
-	if (!ret) {
-		IWL_DEBUG_POWER(mvm, "ba_enable_beacon_abort is: %d\n",
-				le32_to_cpu(cmd->ba_enable_beacon_abort));
-		IWL_DEBUG_POWER(mvm, "ba_escape_timer is: %d\n",
-				le32_to_cpu(cmd->ba_escape_timer));
-		IWL_DEBUG_POWER(mvm, "bf_debug_flag is: %d\n",
-				le32_to_cpu(cmd->bf_debug_flag));
-		IWL_DEBUG_POWER(mvm, "bf_enable_beacon_filter is: %d\n",
-				le32_to_cpu(cmd->bf_enable_beacon_filter));
-		IWL_DEBUG_POWER(mvm, "bf_energy_delta is: %d\n",
-				le32_to_cpu(cmd->bf_energy_delta));
-		IWL_DEBUG_POWER(mvm, "bf_escape_timer is: %d\n",
-				le32_to_cpu(cmd->bf_escape_timer));
-		IWL_DEBUG_POWER(mvm, "bf_roaming_energy_delta is: %d\n",
-				le32_to_cpu(cmd->bf_roaming_energy_delta));
-		IWL_DEBUG_POWER(mvm, "bf_roaming_state is: %d\n",
-				le32_to_cpu(cmd->bf_roaming_state));
-		IWL_DEBUG_POWER(mvm, "bf_temp_threshold is: %d\n",
-				le32_to_cpu(cmd->bf_temp_threshold));
-		IWL_DEBUG_POWER(mvm, "bf_temp_fast_filter is: %d\n",
-				le32_to_cpu(cmd->bf_temp_fast_filter));
-		IWL_DEBUG_POWER(mvm, "bf_temp_slow_filter is: %d\n",
-				le32_to_cpu(cmd->bf_temp_slow_filter));
-	}
-	return ret;
+	IWL_DEBUG_POWER(mvm, "ba_enable_beacon_abort is: %d\n",
+			le32_to_cpu(cmd->ba_enable_beacon_abort));
+	IWL_DEBUG_POWER(mvm, "ba_escape_timer is: %d\n",
+			le32_to_cpu(cmd->ba_escape_timer));
+	IWL_DEBUG_POWER(mvm, "bf_debug_flag is: %d\n",
+			le32_to_cpu(cmd->bf_debug_flag));
+	IWL_DEBUG_POWER(mvm, "bf_enable_beacon_filter is: %d\n",
+			le32_to_cpu(cmd->bf_enable_beacon_filter));
+	IWL_DEBUG_POWER(mvm, "bf_energy_delta is: %d\n",
+			le32_to_cpu(cmd->bf_energy_delta));
+	IWL_DEBUG_POWER(mvm, "bf_escape_timer is: %d\n",
+			le32_to_cpu(cmd->bf_escape_timer));
+	IWL_DEBUG_POWER(mvm, "bf_roaming_energy_delta is: %d\n",
+			le32_to_cpu(cmd->bf_roaming_energy_delta));
+	IWL_DEBUG_POWER(mvm, "bf_roaming_state is: %d\n",
+			le32_to_cpu(cmd->bf_roaming_state));
+	IWL_DEBUG_POWER(mvm, "bf_temp_threshold is: %d\n",
+			le32_to_cpu(cmd->bf_temp_threshold));
+	IWL_DEBUG_POWER(mvm, "bf_temp_fast_filter is: %d\n",
+			le32_to_cpu(cmd->bf_temp_fast_filter));
+	IWL_DEBUG_POWER(mvm, "bf_temp_slow_filter is: %d\n",
+			le32_to_cpu(cmd->bf_temp_slow_filter));
+
+	return iwl_mvm_send_cmd_pdu(mvm, REPLY_BEACON_FILTERING_CMD, flags,
+				    sizeof(struct iwl_beacon_filter_cmd), cmd);
 }
 
 static
@@ -313,7 +309,7 @@ static void iwl_mvm_power_build_cmd(struct iwl_mvm *mvm,
 	    mvmvif->dbgfs_pm.disable_power_off)
 		cmd->flags &= cpu_to_le16(~POWER_FLAGS_POWER_SAVE_ENA_MSK);
 #endif
-	if (!vif->bss_conf.ps || mvmvif->pm_prevented ||
+	if (!vif->bss_conf.ps || mvm->bound_vif_cnt > 1 ||
 	    iwl_mvm_vif_low_latency(mvmvif))
 		return;
 
@@ -549,12 +545,9 @@ int iwl_mvm_power_uapsd_misbehaving_ap_notif(struct iwl_mvm *mvm,
 static void iwl_mvm_power_binding_iterator(void *_data, u8 *mac,
 					   struct ieee80211_vif *vif)
 {
-	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
 	struct iwl_mvm *mvm = _data;
 	int ret;
 
-	mvmvif->pm_prevented = (mvm->bound_vif_cnt <= 1) ? false : true;
-
 	ret = iwl_mvm_power_mac_update_mode(mvm, vif);
 	WARN_ONCE(ret, "Failed to update power parameters on a specific vif\n");
 }
-- 
cgit v1.2.2


From dcefeec05be5821a82f9ee66f6fcb9849d3f7568 Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Sun, 26 Jan 2014 16:54:05 +0200
Subject: iwlwifi: mvm: don't look at power commmand to decide if power is
 enabled

Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/power.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/power.c b/drivers/net/wireless/iwlwifi/mvm/power.c
index f9ddd798ccd5..20bc37648faf 100644
--- a/drivers/net/wireless/iwlwifi/mvm/power.c
+++ b/drivers/net/wireless/iwlwifi/mvm/power.c
@@ -423,6 +423,7 @@ static int iwl_mvm_power_mac_update_mode(struct iwl_mvm *mvm,
 	int ret;
 	bool ba_enable;
 	struct iwl_mac_power_cmd cmd = {};
+	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
 
 	if (vif->type != NL80211_IFTYPE_STATION)
 		return 0;
@@ -439,8 +440,9 @@ static int iwl_mvm_power_mac_update_mode(struct iwl_mvm *mvm,
 	if (ret)
 		return ret;
 
-	ba_enable = !!(cmd.flags &
-		       cpu_to_le16(POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK));
+	ba_enable = !(iwlmvm_mod_params.power_scheme == IWL_POWER_SCHEME_CAM ||
+		      mvm->ps_prevented || mvm->bound_vif_cnt > 1 ||
+		      !vif->bss_conf.ps || iwl_mvm_vif_low_latency(mvmvif));
 
 	return iwl_mvm_update_beacon_abort(mvm, vif, ba_enable);
 }
-- 
cgit v1.2.2


From 06280a2ba9050cd8bc15a03aa22b24698a3ea742 Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Mon, 27 Jan 2014 08:09:23 +0200
Subject: iwlwifi: mvm: don't send the beacon filtering command from iterator

The firmware doesn't allow per-vif beacon filtering: we can
use beacon filtering for one vif only. So remember which
vif has beacon filtering enabled in the iterator, and send
the command outside the iterator.

Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/power.c | 58 +++++++++++++++++++++++++++-----
 1 file changed, 49 insertions(+), 9 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/power.c b/drivers/net/wireless/iwlwifi/mvm/power.c
index 20bc37648faf..15c9c780323b 100644
--- a/drivers/net/wireless/iwlwifi/mvm/power.c
+++ b/drivers/net/wireless/iwlwifi/mvm/power.c
@@ -417,13 +417,10 @@ static void iwl_mvm_power_build_cmd(struct iwl_mvm *mvm,
 #endif /* CONFIG_IWLWIFI_DEBUGFS */
 }
 
-static int iwl_mvm_power_mac_update_mode(struct iwl_mvm *mvm,
+static int _iwl_mvm_power_mac_update_mode(struct iwl_mvm *mvm,
 					 struct ieee80211_vif *vif)
 {
-	int ret;
-	bool ba_enable;
 	struct iwl_mac_power_cmd cmd = {};
-	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
 
 	if (vif->type != NL80211_IFTYPE_STATION)
 		return 0;
@@ -435,8 +432,19 @@ static int iwl_mvm_power_mac_update_mode(struct iwl_mvm *mvm,
 	iwl_mvm_power_build_cmd(mvm, vif, &cmd);
 	iwl_mvm_power_log(mvm, &cmd);
 
-	ret = iwl_mvm_send_cmd_pdu(mvm, MAC_PM_POWER_TABLE, CMD_SYNC,
-				   sizeof(cmd), &cmd);
+	return iwl_mvm_send_cmd_pdu(mvm, MAC_PM_POWER_TABLE, CMD_SYNC,
+				    sizeof(cmd), &cmd);
+}
+
+static int iwl_mvm_power_mac_update_mode(struct iwl_mvm *mvm,
+					 struct ieee80211_vif *vif)
+
+{
+	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
+	bool ba_enable;
+	int ret;
+
+	ret = _iwl_mvm_power_mac_update_mode(mvm, vif);
 	if (ret)
 		return ret;
 
@@ -544,13 +552,24 @@ int iwl_mvm_power_uapsd_misbehaving_ap_notif(struct iwl_mvm *mvm,
 	return 0;
 }
 
+struct iwl_mvm_power_iterator {
+	struct iwl_mvm *mvm;
+	struct ieee80211_vif *bf_vif;
+};
+
 static void iwl_mvm_power_binding_iterator(void *_data, u8 *mac,
 					   struct ieee80211_vif *vif)
 {
-	struct iwl_mvm *mvm = _data;
+	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
+	struct iwl_mvm_power_iterator *power_iterator = _data;
+	struct iwl_mvm *mvm = power_iterator->mvm;
 	int ret;
 
-	ret = iwl_mvm_power_mac_update_mode(mvm, vif);
+	ret = _iwl_mvm_power_mac_update_mode(mvm, vif);
+
+	if (mvmvif->bf_data.bf_enabled && !WARN_ON(power_iterator->bf_vif))
+		power_iterator->bf_vif = vif;
+
 	WARN_ONCE(ret, "Failed to update power parameters on a specific vif\n");
 }
 
@@ -558,6 +577,14 @@ static void _iwl_mvm_power_update_binding(struct iwl_mvm *mvm,
 					  struct ieee80211_vif *vif,
 					  bool assign)
 {
+	bool ba_enable;
+	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
+	struct iwl_mvm_power_iterator power_it = {
+		.mvm = mvm,
+	};
+
+	lockdep_assert_held(&mvm->mutex);
+
 	if (vif->type == NL80211_IFTYPE_MONITOR) {
 		int ret = _iwl_mvm_power_update_device(mvm, assign);
 		mvm->ps_prevented = assign;
@@ -567,7 +594,20 @@ static void _iwl_mvm_power_update_binding(struct iwl_mvm *mvm,
 	ieee80211_iterate_active_interfaces(mvm->hw,
 					    IEEE80211_IFACE_ITER_NORMAL,
 					    iwl_mvm_power_binding_iterator,
-					    mvm);
+					    &power_it);
+
+	if (!power_it.bf_vif)
+		return;
+
+	vif = power_it.bf_vif;
+	mvmvif = iwl_mvm_vif_from_mac80211(vif);
+
+	ba_enable = !(iwlmvm_mod_params.power_scheme == IWL_POWER_SCHEME_CAM ||
+		      mvm->ps_prevented || mvm->bound_vif_cnt > 1 ||
+		      !vif->bss_conf.ps || iwl_mvm_vif_low_latency(mvmvif));
+
+	WARN_ON_ONCE(iwl_mvm_update_beacon_abort(mvm, power_it.bf_vif,
+						 ba_enable));
 }
 
 #ifdef CONFIG_IWLWIFI_DEBUGFS
-- 
cgit v1.2.2


From 474b50c30864a342d47e5d4a4a69df5750fa4254 Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Tue, 28 Jan 2014 09:13:04 +0200
Subject: iwlwifi: mvm: store latest power command for debugfs read

Instead of re-building the power command upon debugfs read,
store the latest command sent to the firmware.
This reduces the code complexity by reducing the number of
entries in the power code.

Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Alexander Bondar <alexander.bondar@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/mvm.h   |  1 +
 drivers/net/wireless/iwlwifi/mvm/power.c | 12 +++++++++++-
 2 files changed, 12 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index 93e6c18537e1..2d76e228c1cb 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -347,6 +347,7 @@ struct iwl_mvm_vif {
 	struct dentry *dbgfs_slink;
 	struct iwl_dbgfs_pm dbgfs_pm;
 	struct iwl_dbgfs_bf dbgfs_bf;
+	struct iwl_mac_power_cmd mac_pwr_cmd;
 #endif
 
 	enum ieee80211_smps_mode smps_requests[NUM_IWL_MVM_SMPS_REQ];
diff --git a/drivers/net/wireless/iwlwifi/mvm/power.c b/drivers/net/wireless/iwlwifi/mvm/power.c
index 15c9c780323b..ac6d2c86e75c 100644
--- a/drivers/net/wireless/iwlwifi/mvm/power.c
+++ b/drivers/net/wireless/iwlwifi/mvm/power.c
@@ -431,6 +431,9 @@ static int _iwl_mvm_power_mac_update_mode(struct iwl_mvm *mvm,
 
 	iwl_mvm_power_build_cmd(mvm, vif, &cmd);
 	iwl_mvm_power_log(mvm, &cmd);
+#ifdef CONFIG_IWLWIFI_DEBUGFS
+	memcpy(&iwl_mvm_vif_from_mac80211(vif)->mac_pwr_cmd, &cmd, sizeof(cmd));
+#endif
 
 	return iwl_mvm_send_cmd_pdu(mvm, MAC_PM_POWER_TABLE, CMD_SYNC,
 				    sizeof(cmd), &cmd);
@@ -475,6 +478,7 @@ static int iwl_mvm_power_mac_disable(struct iwl_mvm *mvm,
 	if (mvmvif->dbgfs_pm.mask & MVM_DEBUGFS_PM_DISABLE_POWER_OFF &&
 	    mvmvif->dbgfs_pm.disable_power_off)
 		cmd.flags &= cpu_to_le16(~POWER_FLAGS_POWER_SAVE_ENA_MSK);
+	memcpy(&mvmvif->mac_pwr_cmd, &cmd, sizeof(cmd));
 #endif
 	iwl_mvm_power_log(mvm, &cmd);
 
@@ -615,10 +619,13 @@ static int iwl_mvm_power_mac_dbgfs_read(struct iwl_mvm *mvm,
 					struct ieee80211_vif *vif, char *buf,
 					int bufsz)
 {
+	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
 	struct iwl_mac_power_cmd cmd = {};
 	int pos = 0;
 
-	iwl_mvm_power_build_cmd(mvm, vif, &cmd);
+	mutex_lock(&mvm->mutex);
+	memcpy(&cmd, &mvmvif->mac_pwr_cmd, sizeof(cmd));
+	mutex_unlock(&mvm->mutex);
 
 	if (!(mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_DEVICE_PS_CMD))
 		pos += scnprintf(buf+pos, bufsz-pos, "disable_power_off = %d\n",
@@ -807,6 +814,9 @@ int iwl_mvm_update_d0i3_power_mode(struct iwl_mvm *mvm,
 		cmd.skip_dtim_periods = 300 / dtimper_msec;
 	}
 	iwl_mvm_power_log(mvm, &cmd);
+#ifdef CONFIG_IWLWIFI_DEBUGFS
+	memcpy(&mvmvif->mac_pwr_cmd, &cmd, sizeof(cmd));
+#endif
 	ret = iwl_mvm_send_cmd_pdu(mvm, MAC_PM_POWER_TABLE, flags,
 				   sizeof(cmd), &cmd);
 	if (ret)
-- 
cgit v1.2.2


From c1cb92fc1ecd2159b7fb148ed8d5f09d511ae030 Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Tue, 28 Jan 2014 10:17:18 +0200
Subject: iwlwifi: mvm: remove support for legacy power API

If the driver detects old firmware, we disable support for
power management.
This greatly simplifies the code.

Reviewed-by: Alexander Bondar <alexander.bondar@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/Makefile       |   2 +-
 drivers/net/wireless/iwlwifi/mvm/d3.c           |   4 +-
 drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c  |   7 +-
 drivers/net/wireless/iwlwifi/mvm/debugfs.c      |   2 +-
 drivers/net/wireless/iwlwifi/mvm/fw.c           |   8 +-
 drivers/net/wireless/iwlwifi/mvm/mac80211.c     |  31 +--
 drivers/net/wireless/iwlwifi/mvm/mvm.h          |  62 +----
 drivers/net/wireless/iwlwifi/mvm/ops.c          |   5 -
 drivers/net/wireless/iwlwifi/mvm/power.c        |  54 ++--
 drivers/net/wireless/iwlwifi/mvm/power_legacy.c | 319 ------------------------
 drivers/net/wireless/iwlwifi/mvm/utils.c        |   2 +-
 11 files changed, 62 insertions(+), 434 deletions(-)
 delete mode 100644 drivers/net/wireless/iwlwifi/mvm/power_legacy.c

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/Makefile b/drivers/net/wireless/iwlwifi/mvm/Makefile
index f98ec2b23898..41d390fd2ac8 100644
--- a/drivers/net/wireless/iwlwifi/mvm/Makefile
+++ b/drivers/net/wireless/iwlwifi/mvm/Makefile
@@ -2,7 +2,7 @@ obj-$(CONFIG_IWLMVM)   += iwlmvm.o
 iwlmvm-y += fw.o mac80211.o nvm.o ops.o phy-ctxt.o mac-ctxt.o
 iwlmvm-y += utils.o rx.o tx.o binding.o quota.o sta.o sf.o
 iwlmvm-y += scan.o time-event.o rs.o
-iwlmvm-y += power.o power_legacy.o bt-coex.o
+iwlmvm-y += power.o bt-coex.o
 iwlmvm-y += led.o tt.o
 iwlmvm-$(CONFIG_IWLWIFI_DEBUGFS) += debugfs.o debugfs-vif.o
 iwlmvm-$(CONFIG_PM_SLEEP) += d3.o
diff --git a/drivers/net/wireless/iwlwifi/mvm/d3.c b/drivers/net/wireless/iwlwifi/mvm/d3.c
index f36a7ee0267f..a9850aa909d8 100644
--- a/drivers/net/wireless/iwlwifi/mvm/d3.c
+++ b/drivers/net/wireless/iwlwifi/mvm/d3.c
@@ -1191,11 +1191,11 @@ static int __iwl_mvm_suspend(struct ieee80211_hw *hw,
 	if (ret)
 		goto out;
 
-	ret = iwl_mvm_power_update_device_mode(mvm);
+	ret = iwl_mvm_power_update_device(mvm);
 	if (ret)
 		goto out;
 
-	ret = iwl_mvm_power_update_mode(mvm, vif);
+	ret = iwl_mvm_power_mac_update_mode(mvm, vif);
 	if (ret)
 		goto out;
 
diff --git a/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c b/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c
index a46895eaa374..9c0708eb540c 100644
--- a/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c
+++ b/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c
@@ -185,7 +185,7 @@ static ssize_t iwl_dbgfs_pm_params_write(struct ieee80211_vif *vif, char *buf,
 
 	mutex_lock(&mvm->mutex);
 	iwl_dbgfs_update_pm(mvm, vif, param, val);
-	ret = iwl_mvm_power_update_mode(mvm, vif);
+	ret = iwl_mvm_power_mac_update_mode(mvm, vif);
 	mutex_unlock(&mvm->mutex);
 
 	return ret ?: count;
@@ -202,7 +202,7 @@ static ssize_t iwl_dbgfs_pm_params_read(struct file *file,
 	int bufsz = sizeof(buf);
 	int pos;
 
-	pos = iwl_mvm_power_dbgfs_read(mvm, vif, buf, bufsz);
+	pos = iwl_mvm_power_mac_dbgfs_read(mvm, vif, buf, bufsz);
 
 	return simple_read_from_buffer(user_buf, count, ppos, buf, pos);
 }
@@ -587,7 +587,8 @@ void iwl_mvm_vif_dbgfs_register(struct iwl_mvm *mvm, struct ieee80211_vif *vif)
 		return;
 	}
 
-	if (iwlmvm_mod_params.power_scheme != IWL_POWER_SCHEME_CAM &&
+	if ((mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_PM_CMD_SUPPORT) &&
+	    iwlmvm_mod_params.power_scheme != IWL_POWER_SCHEME_CAM &&
 	    ((vif->type == NL80211_IFTYPE_STATION && !vif->p2p) ||
 	     (vif->type == NL80211_IFTYPE_STATION && vif->p2p &&
 	      mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_P2P_PS)))
diff --git a/drivers/net/wireless/iwlwifi/mvm/debugfs.c b/drivers/net/wireless/iwlwifi/mvm/debugfs.c
index c116765ebe42..6853e5efe522 100644
--- a/drivers/net/wireless/iwlwifi/mvm/debugfs.c
+++ b/drivers/net/wireless/iwlwifi/mvm/debugfs.c
@@ -250,7 +250,7 @@ static ssize_t iwl_dbgfs_disable_power_off_write(struct iwl_mvm *mvm, char *buf,
 	}
 
 	mutex_lock(&mvm->mutex);
-	ret = iwl_mvm_power_update_device_mode(mvm);
+	ret = iwl_mvm_power_update_device(mvm);
 	mutex_unlock(&mvm->mutex);
 
 	return ret ?: count;
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw.c b/drivers/net/wireless/iwlwifi/mvm/fw.c
index 212ffecf038b..155bb20519c2 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw.c
+++ b/drivers/net/wireless/iwlwifi/mvm/fw.c
@@ -442,7 +442,13 @@ int iwl_mvm_up(struct iwl_mvm *mvm)
 	/* Initialize tx backoffs to the minimal possible */
 	iwl_mvm_tt_tx_backoff(mvm, 0);
 
-	ret = iwl_mvm_power_update_device_mode(mvm);
+	if (!(mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_PM_CMD_SUPPORT)) {
+		ret = iwl_power_legacy_set_cam_mode(mvm);
+		if (ret)
+			goto error;
+	}
+
+	ret = iwl_mvm_power_update_device(mvm);
 	if (ret)
 		goto error;
 
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index 43dd64409fc5..01b450039106 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -636,14 +636,6 @@ static void iwl_mvm_mac_stop(struct ieee80211_hw *hw)
 	cancel_work_sync(&mvm->async_handlers_wk);
 }
 
-static void iwl_mvm_power_update_iterator(void *data, u8 *mac,
-					  struct ieee80211_vif *vif)
-{
-	struct iwl_mvm *mvm = data;
-
-	iwl_mvm_power_update_mode(mvm, vif);
-}
-
 static struct iwl_mvm_phy_ctxt *iwl_mvm_get_free_phy_ctxt(struct iwl_mvm *mvm)
 {
 	u16 i;
@@ -725,7 +717,7 @@ static int iwl_mvm_mac_add_interface(struct ieee80211_hw *hw,
 	if (ret)
 		goto out_release;
 
-	iwl_mvm_power_disable(mvm, vif);
+	iwl_mvm_power_mac_disable(mvm, vif);
 
 	/* beacon filtering */
 	ret = iwl_mvm_disable_beacon_filter(mvm, vif, CMD_SYNC);
@@ -787,11 +779,6 @@ static int iwl_mvm_mac_add_interface(struct ieee80211_hw *hw,
 	if (vif->type != NL80211_IFTYPE_P2P_DEVICE)
 		mvm->vif_count--;
 
-	/* TODO: remove this when legacy PM will be discarded */
-	ieee80211_iterate_active_interfaces(
-		mvm->hw, IEEE80211_IFACE_ITER_NORMAL,
-		iwl_mvm_power_update_iterator, mvm);
-
 	iwl_mvm_mac_ctxt_release(mvm, vif);
  out_unlock:
 	mutex_unlock(&mvm->mutex);
@@ -880,11 +867,6 @@ static void iwl_mvm_mac_remove_interface(struct ieee80211_hw *hw,
 	if (mvm->vif_count && vif->type != NL80211_IFTYPE_P2P_DEVICE)
 		mvm->vif_count--;
 
-	/* TODO: remove this when legacy PM will be discarded */
-	ieee80211_iterate_active_interfaces(
-		mvm->hw, IEEE80211_IFACE_ITER_NORMAL,
-		iwl_mvm_power_update_iterator, mvm);
-
 	iwl_mvm_mac_ctxt_remove(mvm, vif);
 
 out_release:
@@ -1237,15 +1219,6 @@ static void iwl_mvm_bss_info_changed_station(struct iwl_mvm *mvm,
 		/* reset rssi values */
 		mvmvif->bf_data.ave_beacon_signal = 0;
 
-		if (!(mvm->fw->ucode_capa.flags &
-					IWL_UCODE_TLV_FLAGS_PM_CMD_SUPPORT)) {
-			/* Workaround for FW bug, otherwise FW disables device
-			 * power save upon disassociation
-			 */
-			ret = iwl_mvm_power_update_mode(mvm, vif);
-			if (ret)
-				IWL_ERR(mvm, "failed to update power mode\n");
-		}
 		iwl_mvm_bt_coex_vif_change(mvm);
 		iwl_mvm_update_smps(mvm, vif, IWL_MVM_SMPS_REQ_TT,
 				    IEEE80211_SMPS_AUTOMATIC);
@@ -1258,7 +1231,7 @@ static void iwl_mvm_bss_info_changed_station(struct iwl_mvm *mvm,
 					  &mvmvif->time_event_data);
 	} else if (changes & (BSS_CHANGED_PS | BSS_CHANGED_P2P_PS |
 			      BSS_CHANGED_QOS)) {
-		ret = iwl_mvm_power_update_mode(mvm, vif);
+		ret = iwl_mvm_power_mac_update_mode(mvm, vif);
 		if (ret)
 			IWL_ERR(mvm, "failed to update power mode\n");
 	}
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index 2d76e228c1cb..0c12c322eb89 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -92,7 +92,6 @@ enum iwl_mvm_tx_fifo {
 };
 
 extern struct ieee80211_ops iwl_mvm_hw_ops;
-extern const struct iwl_mvm_power_ops pm_legacy_ops;
 extern const struct iwl_mvm_power_ops pm_mac_ops;
 
 /**
@@ -159,20 +158,6 @@ enum iwl_power_scheme {
 					 IEEE80211_WMM_IE_STA_QOSINFO_AC_BE)
 #define IWL_UAPSD_MAX_SP		IEEE80211_WMM_IE_STA_QOSINFO_SP_2
 
-struct iwl_mvm_power_ops {
-	int (*power_update_mode)(struct iwl_mvm *mvm,
-				 struct ieee80211_vif *vif);
-	int (*power_update_device_mode)(struct iwl_mvm *mvm);
-	int (*power_disable)(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
-	void (*power_update_binding)(struct iwl_mvm *mvm,
-				     struct ieee80211_vif *vif, bool assign);
-#ifdef CONFIG_IWLWIFI_DEBUGFS
-	int (*power_dbgfs_read)(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
-				char *buf, int bufsz);
-#endif
-};
-
-
 #ifdef CONFIG_IWLWIFI_DEBUGFS
 enum iwl_dbgfs_pm_mask {
 	MVM_DEBUGFS_PM_KEEP_ALIVE = BIT(0),
@@ -590,8 +575,6 @@ struct iwl_mvm {
 	struct iwl_mvm_tt_mgmt thermal_throttle;
 	s32 temperature;	/* Celsius */
 
-	const struct iwl_mvm_power_ops *pm_ops;
-
 #ifdef CONFIG_NL80211_TESTMODE
 	u32 noa_duration;
 	struct ieee80211_vif *noa_vif;
@@ -826,48 +809,23 @@ iwl_mvm_vif_dbgfs_clean(struct iwl_mvm *mvm, struct ieee80211_vif *vif)
 /* rate scaling */
 int iwl_mvm_send_lq_cmd(struct iwl_mvm *mvm, struct iwl_lq_cmd *lq, bool init);
 
-/* power managment */
-static inline int iwl_mvm_power_update_mode(struct iwl_mvm *mvm,
-					    struct ieee80211_vif *vif)
-{
-	return mvm->pm_ops->power_update_mode(mvm, vif);
-}
+/* power management */
+int iwl_power_legacy_set_cam_mode(struct iwl_mvm *mvm);
 
-static inline int iwl_mvm_power_disable(struct iwl_mvm *mvm,
-					struct ieee80211_vif *vif)
-{
-	return mvm->pm_ops->power_disable(mvm, vif);
-}
-
-static inline int iwl_mvm_power_update_device_mode(struct iwl_mvm *mvm)
-{
-	if (mvm->pm_ops->power_update_device_mode)
-		return mvm->pm_ops->power_update_device_mode(mvm);
-	return 0;
-}
-
-static inline void iwl_mvm_power_update_binding(struct iwl_mvm *mvm,
-						struct ieee80211_vif *vif,
-						bool assign)
-{
-	if (mvm->pm_ops->power_update_binding)
-		mvm->pm_ops->power_update_binding(mvm, vif, assign);
-}
+int iwl_mvm_power_mac_update_mode(struct iwl_mvm *mvm,
+				  struct ieee80211_vif *vif);
+int iwl_mvm_power_mac_disable(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
+int iwl_mvm_power_update_device(struct iwl_mvm *mvm);
+void iwl_mvm_power_update_binding(struct iwl_mvm *mvm,
+				  struct ieee80211_vif *vif, bool assign);
+int iwl_mvm_power_mac_dbgfs_read(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
+				 char *buf, int bufsz);
 
 void iwl_mvm_power_vif_assoc(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
 int iwl_mvm_power_uapsd_misbehaving_ap_notif(struct iwl_mvm *mvm,
 					     struct iwl_rx_cmd_buffer *rxb,
 					     struct iwl_device_cmd *cmd);
 
-#ifdef CONFIG_IWLWIFI_DEBUGFS
-static inline int iwl_mvm_power_dbgfs_read(struct iwl_mvm *mvm,
-					    struct ieee80211_vif *vif,
-					    char *buf, int bufsz)
-{
-	return mvm->pm_ops->power_dbgfs_read(mvm, vif, buf, bufsz);
-}
-#endif
-
 int iwl_mvm_leds_init(struct iwl_mvm *mvm);
 void iwl_mvm_leds_exit(struct iwl_mvm *mvm);
 
diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c
index e268c15e5fea..a46f0b8b0870 100644
--- a/drivers/net/wireless/iwlwifi/mvm/ops.c
+++ b/drivers/net/wireless/iwlwifi/mvm/ops.c
@@ -496,11 +496,6 @@ iwl_op_mode_mvm_start(struct iwl_trans *trans, const struct iwl_cfg *cfg,
 	if (err)
 		goto out_unregister;
 
-	if (mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_PM_CMD_SUPPORT)
-		mvm->pm_ops = &pm_mac_ops;
-	else
-		mvm->pm_ops = &pm_legacy_ops;
-
 	memset(&mvm->rx_stats, 0, sizeof(struct mvm_statistics_rx));
 
 	/* rpm starts with a taken ref. only set the appropriate bit here. */
diff --git a/drivers/net/wireless/iwlwifi/mvm/power.c b/drivers/net/wireless/iwlwifi/mvm/power.c
index ac6d2c86e75c..2eea5b374ece 100644
--- a/drivers/net/wireless/iwlwifi/mvm/power.c
+++ b/drivers/net/wireless/iwlwifi/mvm/power.c
@@ -439,14 +439,17 @@ static int _iwl_mvm_power_mac_update_mode(struct iwl_mvm *mvm,
 				    sizeof(cmd), &cmd);
 }
 
-static int iwl_mvm_power_mac_update_mode(struct iwl_mvm *mvm,
-					 struct ieee80211_vif *vif)
+int iwl_mvm_power_mac_update_mode(struct iwl_mvm *mvm,
+				  struct ieee80211_vif *vif)
 
 {
 	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
 	bool ba_enable;
 	int ret;
 
+	if (!(mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_PM_CMD_SUPPORT))
+		return 0;
+
 	ret = _iwl_mvm_power_mac_update_mode(mvm, vif);
 	if (ret)
 		return ret;
@@ -458,13 +461,15 @@ static int iwl_mvm_power_mac_update_mode(struct iwl_mvm *mvm,
 	return iwl_mvm_update_beacon_abort(mvm, vif, ba_enable);
 }
 
-static int iwl_mvm_power_mac_disable(struct iwl_mvm *mvm,
-				     struct ieee80211_vif *vif)
+int iwl_mvm_power_mac_disable(struct iwl_mvm *mvm, struct ieee80211_vif *vif)
 {
 	struct iwl_mac_power_cmd cmd = {};
 	struct iwl_mvm_vif *mvmvif __maybe_unused =
 		iwl_mvm_vif_from_mac80211(vif);
 
+	if (!(mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_PM_CMD_SUPPORT))
+		return 0;
+
 	if (vif->type != NL80211_IFTYPE_STATION || vif->p2p)
 		return 0;
 
@@ -513,8 +518,11 @@ static int _iwl_mvm_power_update_device(struct iwl_mvm *mvm, bool force_disable)
 				    &cmd);
 }
 
-static int iwl_mvm_power_update_device(struct iwl_mvm *mvm)
+int iwl_mvm_power_update_device(struct iwl_mvm *mvm)
 {
+	if (!(mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_PM_CMD_SUPPORT))
+		return 0;
+
 	return _iwl_mvm_power_update_device(mvm, false);
 }
 
@@ -577,9 +585,8 @@ static void iwl_mvm_power_binding_iterator(void *_data, u8 *mac,
 	WARN_ONCE(ret, "Failed to update power parameters on a specific vif\n");
 }
 
-static void _iwl_mvm_power_update_binding(struct iwl_mvm *mvm,
-					  struct ieee80211_vif *vif,
-					  bool assign)
+void iwl_mvm_power_update_binding(struct iwl_mvm *mvm,
+				  struct ieee80211_vif *vif, bool assign)
 {
 	bool ba_enable;
 	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
@@ -589,6 +596,9 @@ static void _iwl_mvm_power_update_binding(struct iwl_mvm *mvm,
 
 	lockdep_assert_held(&mvm->mutex);
 
+	if (!(mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_PM_CMD_SUPPORT))
+		return;
+
 	if (vif->type == NL80211_IFTYPE_MONITOR) {
 		int ret = _iwl_mvm_power_update_device(mvm, assign);
 		mvm->ps_prevented = assign;
@@ -615,14 +625,18 @@ static void _iwl_mvm_power_update_binding(struct iwl_mvm *mvm,
 }
 
 #ifdef CONFIG_IWLWIFI_DEBUGFS
-static int iwl_mvm_power_mac_dbgfs_read(struct iwl_mvm *mvm,
-					struct ieee80211_vif *vif, char *buf,
-					int bufsz)
+int iwl_mvm_power_mac_dbgfs_read(struct iwl_mvm *mvm,
+				 struct ieee80211_vif *vif, char *buf,
+				 int bufsz)
 {
 	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
 	struct iwl_mac_power_cmd cmd = {};
 	int pos = 0;
 
+	if (WARN_ON(!(mvm->fw->ucode_capa.flags &
+		      IWL_UCODE_TLV_FLAGS_PM_CMD_SUPPORT)))
+		return 0;
+
 	mutex_lock(&mvm->mutex);
 	memcpy(&cmd, &mvmvif->mac_pwr_cmd, sizeof(cmd));
 	mutex_unlock(&mvm->mutex);
@@ -863,12 +877,12 @@ int iwl_mvm_update_beacon_filter(struct iwl_mvm *mvm,
 	return iwl_mvm_enable_beacon_filter(mvm, vif, flags);
 }
 
-const struct iwl_mvm_power_ops pm_mac_ops = {
-	.power_update_mode = iwl_mvm_power_mac_update_mode,
-	.power_update_device_mode = iwl_mvm_power_update_device,
-	.power_disable = iwl_mvm_power_mac_disable,
-	.power_update_binding = _iwl_mvm_power_update_binding,
-#ifdef CONFIG_IWLWIFI_DEBUGFS
-	.power_dbgfs_read = iwl_mvm_power_mac_dbgfs_read,
-#endif
-};
+int iwl_power_legacy_set_cam_mode(struct iwl_mvm *mvm)
+{
+	struct iwl_powertable_cmd cmd = {
+		.keep_alive_seconds = POWER_KEEP_ALIVE_PERIOD_SEC,
+	};
+
+	return iwl_mvm_send_cmd_pdu(mvm, POWER_TABLE_CMD, CMD_SYNC,
+				    sizeof(cmd), &cmd);
+}
diff --git a/drivers/net/wireless/iwlwifi/mvm/power_legacy.c b/drivers/net/wireless/iwlwifi/mvm/power_legacy.c
deleted file mode 100644
index ef712ae5bc62..000000000000
--- a/drivers/net/wireless/iwlwifi/mvm/power_legacy.c
+++ /dev/null
@@ -1,319 +0,0 @@
-/******************************************************************************
- *
- * This file is provided under a dual BSD/GPLv2 license.  When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
- * USA
- *
- * The full GNU General Public License is included in this distribution
- * in the file called COPYING.
- *
- * Contact Information:
- *  Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- * BSD LICENSE
- *
- * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- *  * Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- *  * Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *  * Neither the name Intel Corporation nor the names of its
- *    contributors may be used to endorse or promote products derived
- *    from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *****************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-
-#include <net/mac80211.h>
-
-#include "iwl-debug.h"
-#include "mvm.h"
-#include "iwl-modparams.h"
-#include "fw-api-power.h"
-
-#define POWER_KEEP_ALIVE_PERIOD_SEC    25
-
-static void iwl_mvm_power_log(struct iwl_mvm *mvm,
-			      struct iwl_powertable_cmd *cmd)
-{
-	IWL_DEBUG_POWER(mvm,
-			"Sending power table command for power level %d, flags = 0x%X\n",
-			iwlmvm_mod_params.power_scheme,
-			le16_to_cpu(cmd->flags));
-	IWL_DEBUG_POWER(mvm, "Keep alive = %u sec\n", cmd->keep_alive_seconds);
-
-	if (cmd->flags & cpu_to_le16(POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK)) {
-		IWL_DEBUG_POWER(mvm, "Rx timeout = %u usec\n",
-				le32_to_cpu(cmd->rx_data_timeout));
-		IWL_DEBUG_POWER(mvm, "Tx timeout = %u usec\n",
-				le32_to_cpu(cmd->tx_data_timeout));
-		if (cmd->flags & cpu_to_le16(POWER_FLAGS_SKIP_OVER_DTIM_MSK))
-			IWL_DEBUG_POWER(mvm, "DTIM periods to skip = %u\n",
-					le32_to_cpu(cmd->skip_dtim_periods));
-		if (cmd->flags & cpu_to_le16(POWER_FLAGS_LPRX_ENA_MSK))
-			IWL_DEBUG_POWER(mvm, "LP RX RSSI threshold = %u\n",
-					le32_to_cpu(cmd->lprx_rssi_threshold));
-	}
-}
-
-static void iwl_mvm_power_build_cmd(struct iwl_mvm *mvm,
-				    struct ieee80211_vif *vif,
-				    struct iwl_powertable_cmd *cmd)
-{
-	struct ieee80211_hw *hw = mvm->hw;
-	struct ieee80211_chanctx_conf *chanctx_conf;
-	struct ieee80211_channel *chan;
-	int dtimper, dtimper_msec;
-	int keep_alive;
-	bool radar_detect = false;
-	struct iwl_mvm_vif *mvmvif __maybe_unused =
-		iwl_mvm_vif_from_mac80211(vif);
-
-	/*
-	 * Regardless of power management state the driver must set
-	 * keep alive period. FW will use it for sending keep alive NDPs
-	 * immediately after association.
-	 */
-	cmd->keep_alive_seconds = POWER_KEEP_ALIVE_PERIOD_SEC;
-
-	if (iwlmvm_mod_params.power_scheme == IWL_POWER_SCHEME_CAM)
-		return;
-
-	cmd->flags |= cpu_to_le16(POWER_FLAGS_POWER_SAVE_ENA_MSK);
-	if (!vif->bss_conf.assoc)
-		cmd->flags |= cpu_to_le16(POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK);
-
-#ifdef CONFIG_IWLWIFI_DEBUGFS
-	if (mvmvif->dbgfs_pm.mask & MVM_DEBUGFS_PM_DISABLE_POWER_OFF &&
-	    mvmvif->dbgfs_pm.disable_power_off)
-		cmd->flags &= cpu_to_le16(~POWER_FLAGS_POWER_SAVE_ENA_MSK);
-#endif
-	if (!vif->bss_conf.ps)
-		return;
-
-	cmd->flags |= cpu_to_le16(POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK);
-
-	if (vif->bss_conf.beacon_rate &&
-	    (vif->bss_conf.beacon_rate->bitrate == 10 ||
-	     vif->bss_conf.beacon_rate->bitrate == 60)) {
-		cmd->flags |= cpu_to_le16(POWER_FLAGS_LPRX_ENA_MSK);
-		cmd->lprx_rssi_threshold =
-			cpu_to_le32(POWER_LPRX_RSSI_THRESHOLD);
-	}
-
-	dtimper = hw->conf.ps_dtim_period ?: 1;
-
-	/* Check if radar detection is required on current channel */
-	rcu_read_lock();
-	chanctx_conf = rcu_dereference(vif->chanctx_conf);
-	WARN_ON(!chanctx_conf);
-	if (chanctx_conf) {
-		chan = chanctx_conf->def.chan;
-		radar_detect = chan->flags & IEEE80211_CHAN_RADAR;
-	}
-	rcu_read_unlock();
-
-	/* Check skip over DTIM conditions */
-	if (!radar_detect && (dtimper <= 10) &&
-	    (iwlmvm_mod_params.power_scheme == IWL_POWER_SCHEME_LP ||
-	     mvm->cur_ucode == IWL_UCODE_WOWLAN)) {
-		cmd->flags |= cpu_to_le16(POWER_FLAGS_SKIP_OVER_DTIM_MSK);
-		cmd->skip_dtim_periods = cpu_to_le32(3);
-	}
-
-	/* Check that keep alive period is at least 3 * DTIM */
-	dtimper_msec = dtimper * vif->bss_conf.beacon_int;
-	keep_alive = max_t(int, 3 * dtimper_msec,
-			   MSEC_PER_SEC * cmd->keep_alive_seconds);
-	keep_alive = DIV_ROUND_UP(keep_alive, MSEC_PER_SEC);
-	cmd->keep_alive_seconds = keep_alive;
-
-	if (mvm->cur_ucode != IWL_UCODE_WOWLAN) {
-		cmd->rx_data_timeout = cpu_to_le32(100 * USEC_PER_MSEC);
-		cmd->tx_data_timeout = cpu_to_le32(100 * USEC_PER_MSEC);
-	} else {
-		cmd->rx_data_timeout = cpu_to_le32(10 * USEC_PER_MSEC);
-		cmd->tx_data_timeout = cpu_to_le32(10 * USEC_PER_MSEC);
-	}
-
-#ifdef CONFIG_IWLWIFI_DEBUGFS
-	if (mvmvif->dbgfs_pm.mask & MVM_DEBUGFS_PM_KEEP_ALIVE)
-		cmd->keep_alive_seconds = mvmvif->dbgfs_pm.keep_alive_seconds;
-	if (mvmvif->dbgfs_pm.mask & MVM_DEBUGFS_PM_SKIP_OVER_DTIM) {
-		if (mvmvif->dbgfs_pm.skip_over_dtim)
-			cmd->flags |=
-				cpu_to_le16(POWER_FLAGS_SKIP_OVER_DTIM_MSK);
-		else
-			cmd->flags &=
-				cpu_to_le16(~POWER_FLAGS_SKIP_OVER_DTIM_MSK);
-	}
-	if (mvmvif->dbgfs_pm.mask & MVM_DEBUGFS_PM_RX_DATA_TIMEOUT)
-		cmd->rx_data_timeout =
-			cpu_to_le32(mvmvif->dbgfs_pm.rx_data_timeout);
-	if (mvmvif->dbgfs_pm.mask & MVM_DEBUGFS_PM_TX_DATA_TIMEOUT)
-		cmd->tx_data_timeout =
-			cpu_to_le32(mvmvif->dbgfs_pm.tx_data_timeout);
-	if (mvmvif->dbgfs_pm.mask & MVM_DEBUGFS_PM_SKIP_DTIM_PERIODS)
-		cmd->skip_dtim_periods =
-			cpu_to_le32(mvmvif->dbgfs_pm.skip_dtim_periods);
-	if (mvmvif->dbgfs_pm.mask & MVM_DEBUGFS_PM_LPRX_ENA) {
-		if (mvmvif->dbgfs_pm.lprx_ena)
-			cmd->flags |= cpu_to_le16(POWER_FLAGS_LPRX_ENA_MSK);
-		else
-			cmd->flags &= cpu_to_le16(~POWER_FLAGS_LPRX_ENA_MSK);
-	}
-	if (mvmvif->dbgfs_pm.mask & MVM_DEBUGFS_PM_LPRX_RSSI_THRESHOLD)
-		cmd->lprx_rssi_threshold =
-			cpu_to_le32(mvmvif->dbgfs_pm.lprx_rssi_threshold);
-#endif /* CONFIG_IWLWIFI_DEBUGFS */
-}
-
-static int iwl_mvm_power_legacy_update_mode(struct iwl_mvm *mvm,
-					    struct ieee80211_vif *vif)
-{
-	int ret;
-	bool ba_enable;
-	struct iwl_powertable_cmd cmd = {};
-
-	if (vif->type != NL80211_IFTYPE_STATION || vif->p2p)
-		return 0;
-
-	/*
-	 * TODO: The following vif_count verification is temporary condition.
-	 * Avoid power mode update if more than one interface is currently
-	 * active. Remove this condition when FW will support power management
-	 * on multiple MACs.
-	 */
-	IWL_DEBUG_POWER(mvm, "Currently %d interfaces active\n",
-			mvm->vif_count);
-	if (mvm->vif_count > 1)
-		return 0;
-
-	iwl_mvm_power_build_cmd(mvm, vif, &cmd);
-	iwl_mvm_power_log(mvm, &cmd);
-
-	ret = iwl_mvm_send_cmd_pdu(mvm, POWER_TABLE_CMD, CMD_SYNC,
-				   sizeof(cmd), &cmd);
-	if (ret)
-		return ret;
-
-	ba_enable = !!(cmd.flags &
-		       cpu_to_le16(POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK));
-
-	return iwl_mvm_update_beacon_abort(mvm, vif, ba_enable);
-}
-
-static int iwl_mvm_power_legacy_disable(struct iwl_mvm *mvm,
-					struct ieee80211_vif *vif)
-{
-	struct iwl_powertable_cmd cmd = {};
-	struct iwl_mvm_vif *mvmvif __maybe_unused =
-		iwl_mvm_vif_from_mac80211(vif);
-
-	if (vif->type != NL80211_IFTYPE_STATION || vif->p2p)
-		return 0;
-
-	if (iwlmvm_mod_params.power_scheme != IWL_POWER_SCHEME_CAM)
-		cmd.flags |= cpu_to_le16(POWER_FLAGS_POWER_SAVE_ENA_MSK);
-
-#ifdef CONFIG_IWLWIFI_DEBUGFS
-	if (mvmvif->dbgfs_pm.mask & MVM_DEBUGFS_PM_DISABLE_POWER_OFF &&
-	    mvmvif->dbgfs_pm.disable_power_off)
-		cmd.flags &= cpu_to_le16(~POWER_FLAGS_POWER_SAVE_ENA_MSK);
-#endif
-	iwl_mvm_power_log(mvm, &cmd);
-
-	return iwl_mvm_send_cmd_pdu(mvm, POWER_TABLE_CMD, CMD_ASYNC,
-				    sizeof(cmd), &cmd);
-}
-
-#ifdef CONFIG_IWLWIFI_DEBUGFS
-static int iwl_mvm_power_legacy_dbgfs_read(struct iwl_mvm *mvm,
-					   struct ieee80211_vif *vif, char *buf,
-					   int bufsz)
-{
-	struct iwl_powertable_cmd cmd = {};
-	int pos = 0;
-
-	iwl_mvm_power_build_cmd(mvm, vif, &cmd);
-
-	pos += scnprintf(buf+pos, bufsz-pos, "disable_power_off = %d\n",
-			 (cmd.flags &
-			 cpu_to_le16(POWER_FLAGS_POWER_SAVE_ENA_MSK)) ?
-			 0 : 1);
-	pos += scnprintf(buf+pos, bufsz-pos, "skip_dtim_periods = %d\n",
-			 le32_to_cpu(cmd.skip_dtim_periods));
-	pos += scnprintf(buf+pos, bufsz-pos, "power_scheme = %d\n",
-			 iwlmvm_mod_params.power_scheme);
-	pos += scnprintf(buf+pos, bufsz-pos, "flags = 0x%x\n",
-			 le16_to_cpu(cmd.flags));
-	pos += scnprintf(buf+pos, bufsz-pos, "keep_alive = %d\n",
-			 cmd.keep_alive_seconds);
-
-	if (cmd.flags & cpu_to_le16(POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK)) {
-		pos += scnprintf(buf+pos, bufsz-pos, "skip_over_dtim = %d\n",
-				 (cmd.flags &
-				 cpu_to_le16(POWER_FLAGS_SKIP_OVER_DTIM_MSK)) ?
-				 1 : 0);
-		pos += scnprintf(buf+pos, bufsz-pos, "rx_data_timeout = %d\n",
-				 le32_to_cpu(cmd.rx_data_timeout));
-		pos += scnprintf(buf+pos, bufsz-pos, "tx_data_timeout = %d\n",
-				 le32_to_cpu(cmd.tx_data_timeout));
-		if (cmd.flags & cpu_to_le16(POWER_FLAGS_LPRX_ENA_MSK))
-			pos += scnprintf(buf+pos, bufsz-pos,
-					 "lprx_rssi_threshold = %d\n",
-					 le32_to_cpu(cmd.lprx_rssi_threshold));
-	}
-	return pos;
-}
-#endif
-
-const struct iwl_mvm_power_ops pm_legacy_ops = {
-	.power_update_mode = iwl_mvm_power_legacy_update_mode,
-	.power_disable = iwl_mvm_power_legacy_disable,
-#ifdef CONFIG_IWLWIFI_DEBUGFS
-	.power_dbgfs_read = iwl_mvm_power_legacy_dbgfs_read,
-#endif
-};
diff --git a/drivers/net/wireless/iwlwifi/mvm/utils.c b/drivers/net/wireless/iwlwifi/mvm/utils.c
index b2162328ac96..d4d901068e90 100644
--- a/drivers/net/wireless/iwlwifi/mvm/utils.c
+++ b/drivers/net/wireless/iwlwifi/mvm/utils.c
@@ -564,5 +564,5 @@ int iwl_mvm_update_low_latency(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
 
 	iwl_mvm_bt_coex_vif_change(mvm);
 
-	return iwl_mvm_power_update_mode(mvm, vif);
+	return iwl_mvm_power_mac_update_mode(mvm, vif);
 }
-- 
cgit v1.2.2


From 6345061fda7766b937bc0e52e3467071a640c6c4 Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Tue, 28 Jan 2014 11:18:59 +0200
Subject: iwlwifi: mvm: remove iwl_mvm_power_mac_disable

Its logic can be implemented with
iwl_mvm_power_mac_update_mode.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/mac80211.c |  2 +-
 drivers/net/wireless/iwlwifi/mvm/mvm.h      |  1 -
 drivers/net/wireless/iwlwifi/mvm/power.c    | 30 -----------------------------
 3 files changed, 1 insertion(+), 32 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index 01b450039106..9d290697fbba 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -717,7 +717,7 @@ static int iwl_mvm_mac_add_interface(struct ieee80211_hw *hw,
 	if (ret)
 		goto out_release;
 
-	iwl_mvm_power_mac_disable(mvm, vif);
+	iwl_mvm_power_mac_update_mode(mvm, vif);
 
 	/* beacon filtering */
 	ret = iwl_mvm_disable_beacon_filter(mvm, vif, CMD_SYNC);
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index 0c12c322eb89..bf6b6022ceb9 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -814,7 +814,6 @@ int iwl_power_legacy_set_cam_mode(struct iwl_mvm *mvm);
 
 int iwl_mvm_power_mac_update_mode(struct iwl_mvm *mvm,
 				  struct ieee80211_vif *vif);
-int iwl_mvm_power_mac_disable(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
 int iwl_mvm_power_update_device(struct iwl_mvm *mvm);
 void iwl_mvm_power_update_binding(struct iwl_mvm *mvm,
 				  struct ieee80211_vif *vif, bool assign);
diff --git a/drivers/net/wireless/iwlwifi/mvm/power.c b/drivers/net/wireless/iwlwifi/mvm/power.c
index 2eea5b374ece..5671b83e0ac4 100644
--- a/drivers/net/wireless/iwlwifi/mvm/power.c
+++ b/drivers/net/wireless/iwlwifi/mvm/power.c
@@ -461,36 +461,6 @@ int iwl_mvm_power_mac_update_mode(struct iwl_mvm *mvm,
 	return iwl_mvm_update_beacon_abort(mvm, vif, ba_enable);
 }
 
-int iwl_mvm_power_mac_disable(struct iwl_mvm *mvm, struct ieee80211_vif *vif)
-{
-	struct iwl_mac_power_cmd cmd = {};
-	struct iwl_mvm_vif *mvmvif __maybe_unused =
-		iwl_mvm_vif_from_mac80211(vif);
-
-	if (!(mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_PM_CMD_SUPPORT))
-		return 0;
-
-	if (vif->type != NL80211_IFTYPE_STATION || vif->p2p)
-		return 0;
-
-	cmd.id_and_color = cpu_to_le32(FW_CMD_ID_AND_COLOR(mvmvif->id,
-							   mvmvif->color));
-
-	if (iwlmvm_mod_params.power_scheme != IWL_POWER_SCHEME_CAM)
-		cmd.flags |= cpu_to_le16(POWER_FLAGS_POWER_SAVE_ENA_MSK);
-
-#ifdef CONFIG_IWLWIFI_DEBUGFS
-	if (mvmvif->dbgfs_pm.mask & MVM_DEBUGFS_PM_DISABLE_POWER_OFF &&
-	    mvmvif->dbgfs_pm.disable_power_off)
-		cmd.flags &= cpu_to_le16(~POWER_FLAGS_POWER_SAVE_ENA_MSK);
-	memcpy(&mvmvif->mac_pwr_cmd, &cmd, sizeof(cmd));
-#endif
-	iwl_mvm_power_log(mvm, &cmd);
-
-	return iwl_mvm_send_cmd_pdu(mvm, MAC_PM_POWER_TABLE, CMD_ASYNC,
-				    sizeof(cmd), &cmd);
-}
-
 static int _iwl_mvm_power_update_device(struct iwl_mvm *mvm, bool force_disable)
 {
 	struct iwl_device_power_cmd cmd = {
-- 
cgit v1.2.2


From e5e7aa8e2561019fb3f417041d50e1c0df8f5e42 Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Mon, 27 Jan 2014 16:57:33 +0200
Subject: iwlwifi: mvm: refactor power code

The main complexity of the power code is that it needs to
take into account the firmware limitations.
These limitations state that we need to have a global
picture of the vifs present in the system to be able to
decide if we can enable power management on a specific vif.

Even device power save (as opposed to vif power management)
must be disabled in certain circumstances (monitor vif).

Refactor the current code to make this clearer by defining
a function that explicitely computes these constraints.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/d3.c          |   2 +-
 drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c |   2 +-
 drivers/net/wireless/iwlwifi/mvm/mac80211.c    |  19 +--
 drivers/net/wireless/iwlwifi/mvm/mvm.h         |   9 +-
 drivers/net/wireless/iwlwifi/mvm/power.c       | 169 +++++++++++++++----------
 drivers/net/wireless/iwlwifi/mvm/utils.c       |   2 +-
 6 files changed, 117 insertions(+), 86 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/d3.c b/drivers/net/wireless/iwlwifi/mvm/d3.c
index a9850aa909d8..e3a9cec45566 100644
--- a/drivers/net/wireless/iwlwifi/mvm/d3.c
+++ b/drivers/net/wireless/iwlwifi/mvm/d3.c
@@ -1195,7 +1195,7 @@ static int __iwl_mvm_suspend(struct ieee80211_hw *hw,
 	if (ret)
 		goto out;
 
-	ret = iwl_mvm_power_mac_update_mode(mvm, vif);
+	ret = iwl_mvm_power_update_mac(mvm, vif);
 	if (ret)
 		goto out;
 
diff --git a/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c b/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c
index 9c0708eb540c..29b4396018b1 100644
--- a/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c
+++ b/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c
@@ -185,7 +185,7 @@ static ssize_t iwl_dbgfs_pm_params_write(struct ieee80211_vif *vif, char *buf,
 
 	mutex_lock(&mvm->mutex);
 	iwl_dbgfs_update_pm(mvm, vif, param, val);
-	ret = iwl_mvm_power_mac_update_mode(mvm, vif);
+	ret = iwl_mvm_power_update_mac(mvm, vif);
 	mutex_unlock(&mvm->mutex);
 
 	return ret ?: count;
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index 9d290697fbba..b9b6bfb5b25b 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -717,7 +717,9 @@ static int iwl_mvm_mac_add_interface(struct ieee80211_hw *hw,
 	if (ret)
 		goto out_release;
 
-	iwl_mvm_power_mac_update_mode(mvm, vif);
+	ret = iwl_mvm_power_update_mac(mvm, vif);
+	if (ret)
+		goto out_release;
 
 	/* beacon filtering */
 	ret = iwl_mvm_disable_beacon_filter(mvm, vif, CMD_SYNC);
@@ -867,6 +869,7 @@ static void iwl_mvm_mac_remove_interface(struct ieee80211_hw *hw,
 	if (mvm->vif_count && vif->type != NL80211_IFTYPE_P2P_DEVICE)
 		mvm->vif_count--;
 
+	iwl_mvm_power_update_mac(mvm, vif);
 	iwl_mvm_mac_ctxt_remove(mvm, vif);
 
 out_release:
@@ -1231,7 +1234,7 @@ static void iwl_mvm_bss_info_changed_station(struct iwl_mvm *mvm,
 					  &mvmvif->time_event_data);
 	} else if (changes & (BSS_CHANGED_PS | BSS_CHANGED_P2P_PS |
 			      BSS_CHANGED_QOS)) {
-		ret = iwl_mvm_power_mac_update_mode(mvm, vif);
+		ret = iwl_mvm_power_update_mac(mvm, vif);
 		if (ret)
 			IWL_ERR(mvm, "failed to update power mode\n");
 	}
@@ -1298,7 +1301,7 @@ static int iwl_mvm_start_ap_ibss(struct ieee80211_hw *hw,
 
 	/* power updated needs to be done before quotas */
 	mvm->bound_vif_cnt++;
-	iwl_mvm_power_update_binding(mvm, vif, true);
+	iwl_mvm_power_update_mac(mvm, vif);
 
 	ret = iwl_mvm_update_quotas(mvm, vif);
 	if (ret)
@@ -1317,7 +1320,7 @@ static int iwl_mvm_start_ap_ibss(struct ieee80211_hw *hw,
 
 out_quota_failed:
 	mvm->bound_vif_cnt--;
-	iwl_mvm_power_update_binding(mvm, vif, false);
+	iwl_mvm_power_update_mac(mvm, vif);
 	mvmvif->ap_ibss_active = false;
 	iwl_mvm_send_rm_bcast_sta(mvm, &mvmvif->bcast_sta);
 out_unbind:
@@ -1354,7 +1357,7 @@ static void iwl_mvm_stop_ap_ibss(struct ieee80211_hw *hw,
 	iwl_mvm_binding_remove_vif(mvm, vif);
 
 	mvm->bound_vif_cnt--;
-	iwl_mvm_power_update_binding(mvm, vif, false);
+	iwl_mvm_power_update_mac(mvm, vif);
 
 	iwl_mvm_mac_ctxt_remove(mvm, vif);
 
@@ -2088,7 +2091,7 @@ static int iwl_mvm_assign_vif_chanctx(struct ieee80211_hw *hw,
 	 * otherwise fw will complain.
 	 */
 	mvm->bound_vif_cnt++;
-	iwl_mvm_power_update_binding(mvm, vif, true);
+	iwl_mvm_power_update_mac(mvm, vif);
 
 	/* Setting the quota at this stage is only required for monitor
 	 * interfaces. For the other types, the bss_info changed flow
@@ -2106,7 +2109,7 @@ static int iwl_mvm_assign_vif_chanctx(struct ieee80211_hw *hw,
  out_remove_binding:
 	iwl_mvm_binding_remove_vif(mvm, vif);
 	mvm->bound_vif_cnt--;
-	iwl_mvm_power_update_binding(mvm, vif, false);
+	iwl_mvm_power_update_mac(mvm, vif);
  out_unlock:
 	mutex_unlock(&mvm->mutex);
 	if (ret)
@@ -2139,7 +2142,7 @@ static void iwl_mvm_unassign_vif_chanctx(struct ieee80211_hw *hw,
 
 	iwl_mvm_binding_remove_vif(mvm, vif);
 	mvm->bound_vif_cnt--;
-	iwl_mvm_power_update_binding(mvm, vif, false);
+	iwl_mvm_power_update_mac(mvm, vif);
 
 out_unlock:
 	mvmvif->phy_ctxt = NULL;
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index bf6b6022ceb9..ab6e1e9706db 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -588,7 +588,9 @@ struct iwl_mvm {
 	u8 bound_vif_cnt;
 
 	/* Indicate if device power save is allowed */
-	bool ps_prevented;
+	bool ps_disabled;
+	/* Indicate if device power management is allowed */
+	bool pm_disabled;
 };
 
 /* Extract MVM priv from op_mode and _hw */
@@ -812,11 +814,8 @@ int iwl_mvm_send_lq_cmd(struct iwl_mvm *mvm, struct iwl_lq_cmd *lq, bool init);
 /* power management */
 int iwl_power_legacy_set_cam_mode(struct iwl_mvm *mvm);
 
-int iwl_mvm_power_mac_update_mode(struct iwl_mvm *mvm,
-				  struct ieee80211_vif *vif);
 int iwl_mvm_power_update_device(struct iwl_mvm *mvm);
-void iwl_mvm_power_update_binding(struct iwl_mvm *mvm,
-				  struct ieee80211_vif *vif, bool assign);
+int iwl_mvm_power_update_mac(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
 int iwl_mvm_power_mac_dbgfs_read(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
 				 char *buf, int bufsz);
 
diff --git a/drivers/net/wireless/iwlwifi/mvm/power.c b/drivers/net/wireless/iwlwifi/mvm/power.c
index 5671b83e0ac4..4da1ea44f39a 100644
--- a/drivers/net/wireless/iwlwifi/mvm/power.c
+++ b/drivers/net/wireless/iwlwifi/mvm/power.c
@@ -298,8 +298,7 @@ static void iwl_mvm_power_build_cmd(struct iwl_mvm *mvm,
 	keep_alive = DIV_ROUND_UP(keep_alive, MSEC_PER_SEC);
 	cmd->keep_alive_seconds = cpu_to_le16(keep_alive);
 
-	if (iwlmvm_mod_params.power_scheme == IWL_POWER_SCHEME_CAM ||
-	    mvm->ps_prevented)
+	if (mvm->ps_disabled)
 		return;
 
 	cmd->flags |= cpu_to_le16(POWER_FLAGS_POWER_SAVE_ENA_MSK);
@@ -309,8 +308,8 @@ static void iwl_mvm_power_build_cmd(struct iwl_mvm *mvm,
 	    mvmvif->dbgfs_pm.disable_power_off)
 		cmd->flags &= cpu_to_le16(~POWER_FLAGS_POWER_SAVE_ENA_MSK);
 #endif
-	if (!vif->bss_conf.ps || mvm->bound_vif_cnt > 1 ||
-	    iwl_mvm_vif_low_latency(mvmvif))
+	if (!vif->bss_conf.ps || iwl_mvm_vif_low_latency(mvmvif) ||
+	    mvm->pm_disabled)
 		return;
 
 	cmd->flags |= cpu_to_le16(POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK);
@@ -417,7 +416,7 @@ static void iwl_mvm_power_build_cmd(struct iwl_mvm *mvm,
 #endif /* CONFIG_IWLWIFI_DEBUGFS */
 }
 
-static int _iwl_mvm_power_mac_update_mode(struct iwl_mvm *mvm,
+static int iwl_mvm_power_send_cmd(struct iwl_mvm *mvm,
 					 struct ieee80211_vif *vif)
 {
 	struct iwl_mac_power_cmd cmd = {};
@@ -439,39 +438,22 @@ static int _iwl_mvm_power_mac_update_mode(struct iwl_mvm *mvm,
 				    sizeof(cmd), &cmd);
 }
 
-int iwl_mvm_power_mac_update_mode(struct iwl_mvm *mvm,
-				  struct ieee80211_vif *vif)
-
-{
-	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
-	bool ba_enable;
-	int ret;
-
-	if (!(mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_PM_CMD_SUPPORT))
-		return 0;
-
-	ret = _iwl_mvm_power_mac_update_mode(mvm, vif);
-	if (ret)
-		return ret;
-
-	ba_enable = !(iwlmvm_mod_params.power_scheme == IWL_POWER_SCHEME_CAM ||
-		      mvm->ps_prevented || mvm->bound_vif_cnt > 1 ||
-		      !vif->bss_conf.ps || iwl_mvm_vif_low_latency(mvmvif));
-
-	return iwl_mvm_update_beacon_abort(mvm, vif, ba_enable);
-}
-
-static int _iwl_mvm_power_update_device(struct iwl_mvm *mvm, bool force_disable)
+int iwl_mvm_power_update_device(struct iwl_mvm *mvm)
 {
 	struct iwl_device_power_cmd cmd = {
 		.flags = cpu_to_le16(DEVICE_POWER_FLAGS_POWER_SAVE_ENA_MSK),
 	};
 
+	if (!(mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_PM_CMD_SUPPORT))
+		return 0;
+
 	if (!(mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_DEVICE_PS_CMD))
 		return 0;
 
-	if (iwlmvm_mod_params.power_scheme == IWL_POWER_SCHEME_CAM ||
-	    force_disable)
+	if (iwlmvm_mod_params.power_scheme == IWL_POWER_SCHEME_CAM)
+		mvm->ps_disabled = true;
+
+	if (mvm->ps_disabled)
 		cmd.flags |= cpu_to_le16(DEVICE_POWER_FLAGS_CAM_MSK);
 
 #ifdef CONFIG_IWLWIFI_DEBUGFS
@@ -488,14 +470,6 @@ static int _iwl_mvm_power_update_device(struct iwl_mvm *mvm, bool force_disable)
 				    &cmd);
 }
 
-int iwl_mvm_power_update_device(struct iwl_mvm *mvm)
-{
-	if (!(mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_PM_CMD_SUPPORT))
-		return 0;
-
-	return _iwl_mvm_power_update_device(mvm, false);
-}
-
 void iwl_mvm_power_vif_assoc(struct iwl_mvm *mvm, struct ieee80211_vif *vif)
 {
 	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
@@ -534,64 +508,119 @@ int iwl_mvm_power_uapsd_misbehaving_ap_notif(struct iwl_mvm *mvm,
 	return 0;
 }
 
-struct iwl_mvm_power_iterator {
-	struct iwl_mvm *mvm;
+struct iwl_power_constraint {
 	struct ieee80211_vif *bf_vif;
+	struct ieee80211_vif *bss_vif;
+	bool pm_disabled;
+	bool ps_disabled;
 };
 
-static void iwl_mvm_power_binding_iterator(void *_data, u8 *mac,
-					   struct ieee80211_vif *vif)
+static void iwl_mvm_power_iterator(void *_data, u8 *mac,
+				   struct ieee80211_vif *vif)
 {
 	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
-	struct iwl_mvm_power_iterator *power_iterator = _data;
-	struct iwl_mvm *mvm = power_iterator->mvm;
-	int ret;
+	struct iwl_power_constraint *power_iterator = _data;
+
+	switch (ieee80211_vif_type_p2p(vif)) {
+	case NL80211_IFTYPE_P2P_DEVICE:
+		break;
+
+	case NL80211_IFTYPE_P2P_GO:
+	case NL80211_IFTYPE_AP:
+		/* no BSS power mgmt if we have an active AP */
+		if (mvmvif->ap_ibss_active)
+			power_iterator->pm_disabled = true;
+		break;
+
+	case NL80211_IFTYPE_MONITOR:
+		/* no BSS power mgmt and no device power save */
+		power_iterator->pm_disabled = true;
+		power_iterator->ps_disabled = true;
+		break;
+
+	case NL80211_IFTYPE_P2P_CLIENT:
+		/* no BSS power mgmt if we have a P2P client*/
+		power_iterator->pm_disabled = true;
+		break;
+
+	case NL80211_IFTYPE_STATION:
+		/* we should have only one BSS vif */
+		WARN_ON(power_iterator->bss_vif);
+		power_iterator->bss_vif = vif;
+
+		if (mvmvif->bf_data.bf_enabled &&
+		    !WARN_ON(power_iterator->bf_vif))
+			power_iterator->bf_vif = vif;
+		break;
+
+	default:
+		break;
+	}
+}
 
-	ret = _iwl_mvm_power_mac_update_mode(mvm, vif);
+static void
+iwl_mvm_power_get_global_constraint(struct iwl_mvm *mvm,
+				    struct iwl_power_constraint *constraint)
+{
+	lockdep_assert_held(&mvm->mutex);
+
+	if (iwlmvm_mod_params.power_scheme == IWL_POWER_SCHEME_CAM) {
+		constraint->pm_disabled = true;
+		constraint->ps_disabled = true;
+	}
 
-	if (mvmvif->bf_data.bf_enabled && !WARN_ON(power_iterator->bf_vif))
-		power_iterator->bf_vif = vif;
+	ieee80211_iterate_active_interfaces_atomic(mvm->hw,
+					    IEEE80211_IFACE_ITER_NORMAL,
+					    iwl_mvm_power_iterator, constraint);
 
-	WARN_ONCE(ret, "Failed to update power parameters on a specific vif\n");
+	/* TODO: remove this and determine this variable in the iterator */
+	if (mvm->bound_vif_cnt > 1)
+		constraint->pm_disabled = true;
 }
 
-void iwl_mvm_power_update_binding(struct iwl_mvm *mvm,
-				  struct ieee80211_vif *vif, bool assign)
+int iwl_mvm_power_update_mac(struct iwl_mvm *mvm, struct ieee80211_vif *vif)
 {
-	bool ba_enable;
 	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
-	struct iwl_mvm_power_iterator power_it = {
-		.mvm = mvm,
-	};
+	struct iwl_power_constraint constraint = {};
+	bool ba_enable;
+	int ret;
 
 	lockdep_assert_held(&mvm->mutex);
 
 	if (!(mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_PM_CMD_SUPPORT))
-		return;
+		return 0;
+
+	iwl_mvm_power_get_global_constraint(mvm, &constraint);
+	mvm->ps_disabled = constraint.ps_disabled;
+	mvm->pm_disabled = constraint.pm_disabled;
 
+	/* don't update device power state unless we add / remove monitor */
 	if (vif->type == NL80211_IFTYPE_MONITOR) {
-		int ret = _iwl_mvm_power_update_device(mvm, assign);
-		mvm->ps_prevented = assign;
-		WARN_ONCE(ret, "Failed to update power device state\n");
+		ret = iwl_mvm_power_update_device(mvm);
+		if (ret)
+			return ret;
 	}
 
-	ieee80211_iterate_active_interfaces(mvm->hw,
-					    IEEE80211_IFACE_ITER_NORMAL,
-					    iwl_mvm_power_binding_iterator,
-					    &power_it);
+	ret = iwl_mvm_power_send_cmd(mvm, vif);
+	if (ret)
+		return ret;
 
-	if (!power_it.bf_vif)
-		return;
+	if (constraint.bss_vif && vif != constraint.bss_vif) {
+		ret = iwl_mvm_power_send_cmd(mvm, constraint.bss_vif);
+		if (ret)
+			return ret;
+	}
+
+	if (!constraint.bf_vif)
+		return 0;
 
-	vif = power_it.bf_vif;
+	vif = constraint.bf_vif;
 	mvmvif = iwl_mvm_vif_from_mac80211(vif);
 
-	ba_enable = !(iwlmvm_mod_params.power_scheme == IWL_POWER_SCHEME_CAM ||
-		      mvm->ps_prevented || mvm->bound_vif_cnt > 1 ||
+	ba_enable = !(constraint.pm_disabled || constraint.ps_disabled ||
 		      !vif->bss_conf.ps || iwl_mvm_vif_low_latency(mvmvif));
 
-	WARN_ON_ONCE(iwl_mvm_update_beacon_abort(mvm, power_it.bf_vif,
-						 ba_enable));
+	return iwl_mvm_update_beacon_abort(mvm, constraint.bf_vif, ba_enable);
 }
 
 #ifdef CONFIG_IWLWIFI_DEBUGFS
diff --git a/drivers/net/wireless/iwlwifi/mvm/utils.c b/drivers/net/wireless/iwlwifi/mvm/utils.c
index d4d901068e90..7440ffa766e6 100644
--- a/drivers/net/wireless/iwlwifi/mvm/utils.c
+++ b/drivers/net/wireless/iwlwifi/mvm/utils.c
@@ -564,5 +564,5 @@ int iwl_mvm_update_low_latency(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
 
 	iwl_mvm_bt_coex_vif_change(mvm);
 
-	return iwl_mvm_power_mac_update_mode(mvm, vif);
+	return iwl_mvm_power_update_mac(mvm, vif);
 }
-- 
cgit v1.2.2


From cb2518ca9f06dfcfa3d175773631bfb1e461bdc7 Mon Sep 17 00:00:00 2001
From: Stephane Grosjean <s.grosjean@peak-system.com>
Date: Wed, 15 Jan 2014 09:50:13 +0100
Subject: can: add ability to allocate CANFD frame in skb data

This patch adds the ability of allocating a CANFD frame data structure in the
skb data area.

Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/dev.c | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c
index 13a909822e25..cb584ea00331 100644
--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -521,6 +521,30 @@ struct sk_buff *alloc_can_skb(struct net_device *dev, struct can_frame **cf)
 }
 EXPORT_SYMBOL_GPL(alloc_can_skb);
 
+struct sk_buff *alloc_canfd_skb(struct net_device *dev,
+				struct canfd_frame **cfd)
+{
+	struct sk_buff *skb;
+
+	skb = netdev_alloc_skb(dev, sizeof(struct can_skb_priv) +
+			       sizeof(struct canfd_frame));
+	if (unlikely(!skb))
+		return NULL;
+
+	skb->protocol = htons(ETH_P_CANFD);
+	skb->pkt_type = PACKET_BROADCAST;
+	skb->ip_summed = CHECKSUM_UNNECESSARY;
+
+	can_skb_reserve(skb);
+	can_skb_prv(skb)->ifindex = dev->ifindex;
+
+	*cfd = (struct canfd_frame *)skb_put(skb, sizeof(struct canfd_frame));
+	memset(*cfd, 0, sizeof(struct canfd_frame));
+
+	return skb;
+}
+EXPORT_SYMBOL_GPL(alloc_canfd_skb);
+
 struct sk_buff *alloc_can_err_skb(struct net_device *dev, struct can_frame **cf)
 {
 	struct sk_buff *skb;
-- 
cgit v1.2.2


From 909285c437d4ff85ed55eae13eebd5c851570304 Mon Sep 17 00:00:00 2001
From: Florian Vaussard <florian.vaussard@epfl.ch>
Date: Fri, 31 Jan 2014 14:34:33 +0100
Subject: can: sja1000: convert printk to use netdev API

Use netdev_* where applicable.

Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Tested-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/sja1000/sja1000.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c
index f17c3018b7c7..55cce4737518 100644
--- a/drivers/net/can/sja1000/sja1000.c
+++ b/drivers/net/can/sja1000/sja1000.c
@@ -106,8 +106,7 @@ static int sja1000_probe_chip(struct net_device *dev)
 	struct sja1000_priv *priv = netdev_priv(dev);
 
 	if (priv->reg_base && sja1000_is_absent(priv)) {
-		printk(KERN_INFO "%s: probing @0x%lX failed\n",
-		       DRV_NAME, dev->base_addr);
+		netdev_err(dev, "probing failed\n");
 		return 0;
 	}
 	return -1;
-- 
cgit v1.2.2


From 342180f7dcfb00e4019a0cd0f0e9bfd0c186c710 Mon Sep 17 00:00:00 2001
From: Florian Vaussard <florian.vaussard@epfl.ch>
Date: Fri, 31 Jan 2014 14:34:34 +0100
Subject: can: sja1000: platform: use devm_* APIs

Simplify probe and remove functions by converting most of the resources
to use devm_* APIs.

Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Tested-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/sja1000/sja1000_platform.c | 46 ++++++++----------------------
 1 file changed, 12 insertions(+), 34 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/can/sja1000/sja1000_platform.c b/drivers/net/can/sja1000/sja1000_platform.c
index 943df645b459..50ca27387c4c 100644
--- a/drivers/net/can/sja1000/sja1000_platform.c
+++ b/drivers/net/can/sja1000/sja1000_platform.c
@@ -78,34 +78,26 @@ static int sp_probe(struct platform_device *pdev)
 	pdata = dev_get_platdata(&pdev->dev);
 	if (!pdata) {
 		dev_err(&pdev->dev, "No platform data provided!\n");
-		err = -ENODEV;
-		goto exit;
+		return -ENODEV;
 	}
 
 	res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (!res_mem || !res_irq) {
-		err = -ENODEV;
-		goto exit;
-	}
+	if (!res_mem || !res_irq)
+		return -ENODEV;
 
-	if (!request_mem_region(res_mem->start, resource_size(res_mem),
-				DRV_NAME)) {
-		err = -EBUSY;
-		goto exit;
-	}
+	if (!devm_request_mem_region(&pdev->dev, res_mem->start,
+				     resource_size(res_mem), DRV_NAME))
+		return -EBUSY;
 
-	addr = ioremap_nocache(res_mem->start, resource_size(res_mem));
-	if (!addr) {
-		err = -ENOMEM;
-		goto exit_release;
-	}
+	addr = devm_ioremap_nocache(&pdev->dev, res_mem->start,
+				    resource_size(res_mem));
+	if (!addr)
+		return -ENOMEM;
 
 	dev = alloc_sja1000dev(0);
-	if (!dev) {
-		err = -ENOMEM;
-		goto exit_iounmap;
-	}
+	if (!dev)
+		return -ENOMEM;
 	priv = netdev_priv(dev);
 
 	dev->irq = res_irq->start;
@@ -150,28 +142,14 @@ static int sp_probe(struct platform_device *pdev)
 
  exit_free:
 	free_sja1000dev(dev);
- exit_iounmap:
-	iounmap(addr);
- exit_release:
-	release_mem_region(res_mem->start, resource_size(res_mem));
- exit:
 	return err;
 }
 
 static int sp_remove(struct platform_device *pdev)
 {
 	struct net_device *dev = platform_get_drvdata(pdev);
-	struct sja1000_priv *priv = netdev_priv(dev);
-	struct resource *res;
 
 	unregister_sja1000dev(dev);
-
-	if (priv->reg_base)
-		iounmap(priv->reg_base);
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(res->start, resource_size(res));
-
 	free_sja1000dev(dev);
 
 	return 0;
-- 
cgit v1.2.2


From 02729c3d08c9334d03d61d365ff2408514a46c81 Mon Sep 17 00:00:00 2001
From: Florian Vaussard <florian.vaussard@epfl.ch>
Date: Fri, 31 Jan 2014 14:34:35 +0100
Subject: can: sja1000: fuse of_platform into platform

The OpenFirmware probe can be merged into the standard platform
probe to leverage common code.

Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Tested-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/sja1000/Kconfig               |  13 +-
 drivers/net/can/sja1000/Makefile              |   1 -
 drivers/net/can/sja1000/sja1000_of_platform.c | 220 --------------------------
 drivers/net/can/sja1000/sja1000_platform.c    | 134 ++++++++++++----
 4 files changed, 109 insertions(+), 259 deletions(-)
 delete mode 100644 drivers/net/can/sja1000/sja1000_of_platform.c

(limited to 'drivers/net')

diff --git a/drivers/net/can/sja1000/Kconfig b/drivers/net/can/sja1000/Kconfig
index ff2ba86cd4a4..4b18b8765523 100644
--- a/drivers/net/can/sja1000/Kconfig
+++ b/drivers/net/can/sja1000/Kconfig
@@ -17,16 +17,9 @@ config CAN_SJA1000_PLATFORM
 	  the "platform bus" (Linux abstraction for directly to the
 	  processor attached devices).  Which can be found on various
 	  boards from Phytec (http://www.phytec.de) like the PCM027,
-	  PCM038.
-
-config CAN_SJA1000_OF_PLATFORM
-	tristate "Generic OF Platform Bus based SJA1000 driver"
-	depends on OF
-	---help---
-	  This driver adds support for the SJA1000 chips connected to
-	  the OpenFirmware "platform bus" found on embedded systems with
-	  OpenFirmware bindings, e.g. if you have a PowerPC based system
-	  you may want to enable this option.
+	  PCM038. It also provides the OpenFirmware "platform bus" found
+	  on embedded systems with OpenFirmware bindings, e.g. if you
+	  have a PowerPC based system you may want to enable this option.
 
 config CAN_EMS_PCMCIA
 	tristate "EMS CPC-CARD Card"
diff --git a/drivers/net/can/sja1000/Makefile b/drivers/net/can/sja1000/Makefile
index b3d05cbfec36..531d5fcc97e5 100644
--- a/drivers/net/can/sja1000/Makefile
+++ b/drivers/net/can/sja1000/Makefile
@@ -5,7 +5,6 @@
 obj-$(CONFIG_CAN_SJA1000) += sja1000.o
 obj-$(CONFIG_CAN_SJA1000_ISA) += sja1000_isa.o
 obj-$(CONFIG_CAN_SJA1000_PLATFORM) += sja1000_platform.o
-obj-$(CONFIG_CAN_SJA1000_OF_PLATFORM) += sja1000_of_platform.o
 obj-$(CONFIG_CAN_EMS_PCMCIA) += ems_pcmcia.o
 obj-$(CONFIG_CAN_EMS_PCI) += ems_pci.o
 obj-$(CONFIG_CAN_KVASER_PCI) += kvaser_pci.o
diff --git a/drivers/net/can/sja1000/sja1000_of_platform.c b/drivers/net/can/sja1000/sja1000_of_platform.c
deleted file mode 100644
index 2f6e24534231..000000000000
--- a/drivers/net/can/sja1000/sja1000_of_platform.c
+++ /dev/null
@@ -1,220 +0,0 @@
-/*
- * Driver for SJA1000 CAN controllers on the OpenFirmware platform bus
- *
- * Copyright (C) 2008-2009 Wolfgang Grandegger <wg@grandegger.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the version 2 of the GNU General Public License
- * as published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see <http://www.gnu.org/licenses/>.
- */
-
-/* This is a generic driver for SJA1000 chips on the OpenFirmware platform
- * bus found on embedded PowerPC systems. You need a SJA1000 CAN node
- * definition in your flattened device tree source (DTS) file similar to:
- *
- *   can@3,100 {
- *           compatible = "nxp,sja1000";
- *           reg = <3 0x100 0x80>;
- *           interrupts = <2 0>;
- *           interrupt-parent = <&mpic>;
- *           nxp,external-clock-frequency = <16000000>;
- *   };
- *
- * See "Documentation/devicetree/bindings/net/can/sja1000.txt" for further
- * information.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/netdevice.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/can/dev.h>
-
-#include <linux/of_platform.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-
-#include "sja1000.h"
-
-#define DRV_NAME "sja1000_of_platform"
-
-MODULE_AUTHOR("Wolfgang Grandegger <wg@grandegger.com>");
-MODULE_DESCRIPTION("Socket-CAN driver for SJA1000 on the OF platform bus");
-MODULE_LICENSE("GPL v2");
-
-#define SJA1000_OFP_CAN_CLOCK  (16000000 / 2)
-
-#define SJA1000_OFP_OCR        OCR_TX0_PULLDOWN
-#define SJA1000_OFP_CDR        (CDR_CBP | CDR_CLK_OFF)
-
-static u8 sja1000_ofp_read_reg(const struct sja1000_priv *priv, int reg)
-{
-	return ioread8(priv->reg_base + reg);
-}
-
-static void sja1000_ofp_write_reg(const struct sja1000_priv *priv,
-				  int reg, u8 val)
-{
-	iowrite8(val, priv->reg_base + reg);
-}
-
-static int sja1000_ofp_remove(struct platform_device *ofdev)
-{
-	struct net_device *dev = platform_get_drvdata(ofdev);
-	struct sja1000_priv *priv = netdev_priv(dev);
-	struct device_node *np = ofdev->dev.of_node;
-	struct resource res;
-
-	unregister_sja1000dev(dev);
-	free_sja1000dev(dev);
-	iounmap(priv->reg_base);
-	irq_dispose_mapping(dev->irq);
-
-	of_address_to_resource(np, 0, &res);
-	release_mem_region(res.start, resource_size(&res));
-
-	return 0;
-}
-
-static int sja1000_ofp_probe(struct platform_device *ofdev)
-{
-	struct device_node *np = ofdev->dev.of_node;
-	struct net_device *dev;
-	struct sja1000_priv *priv;
-	struct resource res;
-	u32 prop;
-	int err, irq, res_size;
-	void __iomem *base;
-
-	err = of_address_to_resource(np, 0, &res);
-	if (err) {
-		dev_err(&ofdev->dev, "invalid address\n");
-		return err;
-	}
-
-	res_size = resource_size(&res);
-
-	if (!request_mem_region(res.start, res_size, DRV_NAME)) {
-		dev_err(&ofdev->dev, "couldn't request %pR\n", &res);
-		return -EBUSY;
-	}
-
-	base = ioremap_nocache(res.start, res_size);
-	if (!base) {
-		dev_err(&ofdev->dev, "couldn't ioremap %pR\n", &res);
-		err = -ENOMEM;
-		goto exit_release_mem;
-	}
-
-	irq = irq_of_parse_and_map(np, 0);
-	if (irq == 0) {
-		dev_err(&ofdev->dev, "no irq found\n");
-		err = -ENODEV;
-		goto exit_unmap_mem;
-	}
-
-	dev = alloc_sja1000dev(0);
-	if (!dev) {
-		err = -ENOMEM;
-		goto exit_dispose_irq;
-	}
-
-	priv = netdev_priv(dev);
-
-	priv->read_reg = sja1000_ofp_read_reg;
-	priv->write_reg = sja1000_ofp_write_reg;
-
-	err = of_property_read_u32(np, "nxp,external-clock-frequency", &prop);
-	if (!err)
-		priv->can.clock.freq = prop / 2;
-	else
-		priv->can.clock.freq = SJA1000_OFP_CAN_CLOCK; /* default */
-
-	err = of_property_read_u32(np, "nxp,tx-output-mode", &prop);
-	if (!err)
-		priv->ocr |= prop & OCR_MODE_MASK;
-	else
-		priv->ocr |= OCR_MODE_NORMAL; /* default */
-
-	err = of_property_read_u32(np, "nxp,tx-output-config", &prop);
-	if (!err)
-		priv->ocr |= (prop << OCR_TX_SHIFT) & OCR_TX_MASK;
-	else
-		priv->ocr |= OCR_TX0_PULLDOWN; /* default */
-
-	err = of_property_read_u32(np, "nxp,clock-out-frequency", &prop);
-	if (!err && prop) {
-		u32 divider = priv->can.clock.freq * 2 / prop;
-
-		if (divider > 1)
-			priv->cdr |= divider / 2 - 1;
-		else
-			priv->cdr |= CDR_CLKOUT_MASK;
-	} else {
-		priv->cdr |= CDR_CLK_OFF; /* default */
-	}
-
-	if (!of_property_read_bool(np, "nxp,no-comparator-bypass"))
-		priv->cdr |= CDR_CBP; /* default */
-
-	priv->irq_flags = IRQF_SHARED;
-	priv->reg_base = base;
-
-	dev->irq = irq;
-
-	dev_info(&ofdev->dev,
-		 "reg_base=0x%p irq=%d clock=%d ocr=0x%02x cdr=0x%02x\n",
-		 priv->reg_base, dev->irq, priv->can.clock.freq,
-		 priv->ocr, priv->cdr);
-
-	platform_set_drvdata(ofdev, dev);
-	SET_NETDEV_DEV(dev, &ofdev->dev);
-
-	err = register_sja1000dev(dev);
-	if (err) {
-		dev_err(&ofdev->dev, "registering %s failed (err=%d)\n",
-			DRV_NAME, err);
-		goto exit_free_sja1000;
-	}
-
-	return 0;
-
-exit_free_sja1000:
-	free_sja1000dev(dev);
-exit_dispose_irq:
-	irq_dispose_mapping(irq);
-exit_unmap_mem:
-	iounmap(base);
-exit_release_mem:
-	release_mem_region(res.start, res_size);
-
-	return err;
-}
-
-static struct of_device_id sja1000_ofp_table[] = {
-	{.compatible = "nxp,sja1000"},
-	{},
-};
-MODULE_DEVICE_TABLE(of, sja1000_ofp_table);
-
-static struct platform_driver sja1000_ofp_driver = {
-	.driver = {
-		.owner = THIS_MODULE,
-		.name = DRV_NAME,
-		.of_match_table = sja1000_ofp_table,
-	},
-	.probe = sja1000_ofp_probe,
-	.remove = sja1000_ofp_remove,
-};
-
-module_platform_driver(sja1000_ofp_driver);
diff --git a/drivers/net/can/sja1000/sja1000_platform.c b/drivers/net/can/sja1000/sja1000_platform.c
index 50ca27387c4c..b7fbe4f57720 100644
--- a/drivers/net/can/sja1000/sja1000_platform.c
+++ b/drivers/net/can/sja1000/sja1000_platform.c
@@ -26,12 +26,16 @@
 #include <linux/can/dev.h>
 #include <linux/can/platform/sja1000.h>
 #include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
 
 #include "sja1000.h"
 
 #define DRV_NAME "sja1000_platform"
+#define SP_CAN_CLOCK  (16000000 / 2)
 
 MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
+MODULE_AUTHOR("Wolfgang Grandegger <wg@grandegger.com>");
 MODULE_DESCRIPTION("Socket-CAN driver for SJA1000 on the platform bus");
 MODULE_ALIAS("platform:" DRV_NAME);
 MODULE_LICENSE("GPL v2");
@@ -66,24 +70,92 @@ static void sp_write_reg32(const struct sja1000_priv *priv, int reg, u8 val)
 	iowrite8(val, priv->reg_base + reg * 4);
 }
 
-static int sp_probe(struct platform_device *pdev)
+static void sp_populate(struct sja1000_priv *priv,
+			struct sja1000_platform_data *pdata,
+			unsigned long resource_mem_flags)
+{
+	/* The CAN clock frequency is half the oscillator clock frequency */
+	priv->can.clock.freq = pdata->osc_freq / 2;
+	priv->ocr = pdata->ocr;
+	priv->cdr = pdata->cdr;
+
+	switch (resource_mem_flags & IORESOURCE_MEM_TYPE_MASK) {
+	case IORESOURCE_MEM_32BIT:
+		priv->read_reg = sp_read_reg32;
+		priv->write_reg = sp_write_reg32;
+		break;
+	case IORESOURCE_MEM_16BIT:
+		priv->read_reg = sp_read_reg16;
+		priv->write_reg = sp_write_reg16;
+		break;
+	case IORESOURCE_MEM_8BIT:
+	default:
+		priv->read_reg = sp_read_reg8;
+		priv->write_reg = sp_write_reg8;
+		break;
+	}
+}
+
+static void sp_populate_of(struct sja1000_priv *priv, struct device_node *of)
 {
 	int err;
+	u32 prop;
+
+	priv->read_reg = sp_read_reg8;
+	priv->write_reg = sp_write_reg8;
+
+	err = of_property_read_u32(of, "nxp,external-clock-frequency", &prop);
+	if (!err)
+		priv->can.clock.freq = prop / 2;
+	else
+		priv->can.clock.freq = SP_CAN_CLOCK; /* default */
+
+	err = of_property_read_u32(of, "nxp,tx-output-mode", &prop);
+	if (!err)
+		priv->ocr |= prop & OCR_MODE_MASK;
+	else
+		priv->ocr |= OCR_MODE_NORMAL; /* default */
+
+	err = of_property_read_u32(of, "nxp,tx-output-config", &prop);
+	if (!err)
+		priv->ocr |= (prop << OCR_TX_SHIFT) & OCR_TX_MASK;
+	else
+		priv->ocr |= OCR_TX0_PULLDOWN; /* default */
+
+	err = of_property_read_u32(of, "nxp,clock-out-frequency", &prop);
+	if (!err && prop) {
+		u32 divider = priv->can.clock.freq * 2 / prop;
+
+		if (divider > 1)
+			priv->cdr |= divider / 2 - 1;
+		else
+			priv->cdr |= CDR_CLKOUT_MASK;
+	} else {
+		priv->cdr |= CDR_CLK_OFF; /* default */
+	}
+
+	if (!of_property_read_bool(of, "nxp,no-comparator-bypass"))
+		priv->cdr |= CDR_CBP; /* default */
+}
+
+static int sp_probe(struct platform_device *pdev)
+{
+	int err, irq = 0;
 	void __iomem *addr;
 	struct net_device *dev;
 	struct sja1000_priv *priv;
-	struct resource *res_mem, *res_irq;
+	struct resource *res_mem, *res_irq = NULL;
 	struct sja1000_platform_data *pdata;
+	struct device_node *of = pdev->dev.of_node;
 
 	pdata = dev_get_platdata(&pdev->dev);
-	if (!pdata) {
+	if (!pdata && !of) {
 		dev_err(&pdev->dev, "No platform data provided!\n");
 		return -ENODEV;
 	}
 
 	res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (!res_mem || !res_irq)
+	if (!res_mem)
 		return -ENODEV;
 
 	if (!devm_request_mem_region(&pdev->dev, res_mem->start,
@@ -95,36 +167,35 @@ static int sp_probe(struct platform_device *pdev)
 	if (!addr)
 		return -ENOMEM;
 
+	if (of)
+		irq = irq_of_parse_and_map(of, 0);
+	else
+		res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+
+	if (!irq && !res_irq)
+		return -ENODEV;
+
 	dev = alloc_sja1000dev(0);
 	if (!dev)
 		return -ENOMEM;
 	priv = netdev_priv(dev);
 
-	dev->irq = res_irq->start;
-	priv->irq_flags = res_irq->flags & IRQF_TRIGGER_MASK;
-	if (res_irq->flags & IORESOURCE_IRQ_SHAREABLE)
-		priv->irq_flags |= IRQF_SHARED;
+	if (res_irq) {
+		irq = res_irq->start;
+		priv->irq_flags = res_irq->flags & IRQF_TRIGGER_MASK;
+		if (res_irq->flags & IORESOURCE_IRQ_SHAREABLE)
+			priv->irq_flags |= IRQF_SHARED;
+	} else {
+		priv->irq_flags = IRQF_SHARED;
+	}
+
+	dev->irq = irq;
 	priv->reg_base = addr;
-	/* The CAN clock frequency is half the oscillator clock frequency */
-	priv->can.clock.freq = pdata->osc_freq / 2;
-	priv->ocr = pdata->ocr;
-	priv->cdr = pdata->cdr;
 
-	switch (res_mem->flags & IORESOURCE_MEM_TYPE_MASK) {
-	case IORESOURCE_MEM_32BIT:
-		priv->read_reg = sp_read_reg32;
-		priv->write_reg = sp_write_reg32;
-		break;
-	case IORESOURCE_MEM_16BIT:
-		priv->read_reg = sp_read_reg16;
-		priv->write_reg = sp_write_reg16;
-		break;
-	case IORESOURCE_MEM_8BIT:
-	default:
-		priv->read_reg = sp_read_reg8;
-		priv->write_reg = sp_write_reg8;
-		break;
-	}
+	if (of)
+		sp_populate_of(priv, of);
+	else
+		sp_populate(priv, pdata, res_mem->flags);
 
 	platform_set_drvdata(pdev, dev);
 	SET_NETDEV_DEV(dev, &pdev->dev);
@@ -155,12 +226,19 @@ static int sp_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static struct of_device_id sp_of_table[] = {
+	{.compatible = "nxp,sja1000"},
+	{},
+};
+MODULE_DEVICE_TABLE(of, sp_of_table);
+
 static struct platform_driver sp_driver = {
 	.probe = sp_probe,
 	.remove = sp_remove,
 	.driver = {
 		.name = DRV_NAME,
 		.owner = THIS_MODULE,
+		.of_match_table = sp_of_table,
 	},
 };
 
-- 
cgit v1.2.2


From f591a1a5dc34341dce9af2efaa9e2e824ceb67be Mon Sep 17 00:00:00 2001
From: Ben Greear <greearb@candelatech.com>
Date: Tue, 4 Feb 2014 19:51:38 +0200
Subject: ath10k:  Print out firmware feature bits from IE.

Aids in understanding excactly what a firmware is
offering.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/core.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 3b59af3bddf4..56048b1bbca5 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -470,8 +470,12 @@ static int ath10k_core_fetch_firmware_api_n(struct ath10k *ar, const char *name)
 				if (index == ie_len)
 					break;
 
-				if (data[index] & (1 << bit))
+				if (data[index] & (1 << bit)) {
+					ath10k_dbg(ATH10K_DBG_BOOT,
+						   "Enabling feature bit: %i\n",
+						   i);
 					__set_bit(i, ar->fw_features);
+				}
 			}
 
 			ath10k_dbg_dump(ATH10K_DBG_BOOT, "features", "",
-- 
cgit v1.2.2


From 664834dee63c55188093bb5f295283c7693003d6 Mon Sep 17 00:00:00 2001
From: Jouni Malinen <j@w1.fi>
Date: Wed, 15 Jan 2014 00:01:44 +0200
Subject: cfg80211: Clean up connect params and channel fetching

Addition of the frequency hints showed up couple of places in cfg80211
where pointers could be marked const and a shared function could be used
to fetch a valid channel.

Signed-off-by: Jouni Malinen <j@w1.fi>
[fix mwifiex]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/mwifiex/cfg80211.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index 8bfc07cd330e..f4cf9c9d40ec 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -1583,8 +1583,9 @@ static int mwifiex_cfg80211_inform_ibss_bss(struct mwifiex_private *priv)
  * the function notifies the CFG802.11 subsystem of the new BSS connection.
  */
 static int
-mwifiex_cfg80211_assoc(struct mwifiex_private *priv, size_t ssid_len, u8 *ssid,
-		       u8 *bssid, int mode, struct ieee80211_channel *channel,
+mwifiex_cfg80211_assoc(struct mwifiex_private *priv, size_t ssid_len,
+		       const u8 *ssid, const u8 *bssid, int mode,
+		       struct ieee80211_channel *channel,
 		       struct cfg80211_connect_params *sme, bool privacy)
 {
 	struct cfg80211_ssid req_ssid;
-- 
cgit v1.2.2


From 4b5800fec6173765207abded99df3d692ed55691 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Wed, 15 Jan 2014 14:55:59 +0100
Subject: cfg80211: make connect ie param const

This required liberally sprinkling 'const' over brcmfmac
and mwifiex but seems like a useful thing to do since the
pointer can't really be written.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/fwil.c     |  5 ++-
 drivers/net/wireless/brcm80211/brcmfmac/fwil.h     |  2 +-
 .../net/wireless/brcm80211/brcmfmac/wl_cfg80211.c  | 46 +++++++++++-----------
 .../net/wireless/brcm80211/brcmfmac/wl_cfg80211.h  |  3 +-
 drivers/net/wireless/mwifiex/main.h                |  2 +-
 drivers/net/wireless/mwifiex/sta_ioctl.c           |  2 +-
 6 files changed, 31 insertions(+), 29 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwil.c b/drivers/net/wireless/brcm80211/brcmfmac/fwil.c
index 22adbe311d20..59a5af5bf994 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/fwil.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwil.c
@@ -124,7 +124,8 @@ brcmf_fil_cmd_int_get(struct brcmf_if *ifp, u32 cmd, u32 *data)
 }
 
 static u32
-brcmf_create_iovar(char *name, char *data, u32 datalen, char *buf, u32 buflen)
+brcmf_create_iovar(char *name, const char *data, u32 datalen,
+		   char *buf, u32 buflen)
 {
 	u32 len;
 
@@ -144,7 +145,7 @@ brcmf_create_iovar(char *name, char *data, u32 datalen, char *buf, u32 buflen)
 
 
 s32
-brcmf_fil_iovar_data_set(struct brcmf_if *ifp, char *name, void *data,
+brcmf_fil_iovar_data_set(struct brcmf_if *ifp, char *name, const void *data,
 			 u32 len)
 {
 	struct brcmf_pub *drvr = ifp->drvr;
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwil.h b/drivers/net/wireless/brcm80211/brcmfmac/fwil.h
index 77eae86e55c2..a30be683f4a1 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/fwil.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwil.h
@@ -83,7 +83,7 @@ s32 brcmf_fil_cmd_data_get(struct brcmf_if *ifp, u32 cmd, void *data, u32 len);
 s32 brcmf_fil_cmd_int_set(struct brcmf_if *ifp, u32 cmd, u32 data);
 s32 brcmf_fil_cmd_int_get(struct brcmf_if *ifp, u32 cmd, u32 *data);
 
-s32 brcmf_fil_iovar_data_set(struct brcmf_if *ifp, char *name, void *data,
+s32 brcmf_fil_iovar_data_set(struct brcmf_if *ifp, char *name, const void *data,
 			     u32 len);
 s32 brcmf_fil_iovar_data_get(struct brcmf_if *ifp, char *name, void *data,
 			     u32 len);
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
index d7718a5fa2f0..3d25c18340c5 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
@@ -351,13 +351,11 @@ u16 channel_to_chanspec(struct brcmu_d11inf *d11inf,
  * triples, returning a pointer to the substring whose first element
  * matches tag
  */
-struct brcmf_tlv *brcmf_parse_tlvs(void *buf, int buflen, uint key)
+const struct brcmf_tlv *
+brcmf_parse_tlvs(const void *buf, int buflen, uint key)
 {
-	struct brcmf_tlv *elt;
-	int totlen;
-
-	elt = (struct brcmf_tlv *)buf;
-	totlen = buflen;
+	const struct brcmf_tlv *elt = buf;
+	int totlen = buflen;
 
 	/* find tagged parameter */
 	while (totlen >= TLV_HDR_LEN) {
@@ -378,8 +376,8 @@ struct brcmf_tlv *brcmf_parse_tlvs(void *buf, int buflen, uint key)
  * not update the tlvs buffer pointer/length.
  */
 static bool
-brcmf_tlv_has_ie(u8 *ie, u8 **tlvs, u32 *tlvs_len,
-		 u8 *oui, u32 oui_len, u8 type)
+brcmf_tlv_has_ie(const u8 *ie, const u8 **tlvs, u32 *tlvs_len,
+		 const u8 *oui, u32 oui_len, u8 type)
 {
 	/* If the contents match the OUI and the type */
 	if (ie[TLV_LEN_OFF] >= oui_len + 1 &&
@@ -401,12 +399,12 @@ brcmf_tlv_has_ie(u8 *ie, u8 **tlvs, u32 *tlvs_len,
 }
 
 static struct brcmf_vs_tlv *
-brcmf_find_wpaie(u8 *parse, u32 len)
+brcmf_find_wpaie(const u8 *parse, u32 len)
 {
-	struct brcmf_tlv *ie;
+	const struct brcmf_tlv *ie;
 
 	while ((ie = brcmf_parse_tlvs(parse, len, WLAN_EID_VENDOR_SPECIFIC))) {
-		if (brcmf_tlv_has_ie((u8 *)ie, &parse, &len,
+		if (brcmf_tlv_has_ie((const u8 *)ie, &parse, &len,
 				     WPA_OUI, TLV_OUI_LEN, WPA_OUI_TYPE))
 			return (struct brcmf_vs_tlv *)ie;
 	}
@@ -414,9 +412,9 @@ brcmf_find_wpaie(u8 *parse, u32 len)
 }
 
 static struct brcmf_vs_tlv *
-brcmf_find_wpsie(u8 *parse, u32 len)
+brcmf_find_wpsie(const u8 *parse, u32 len)
 {
-	struct brcmf_tlv *ie;
+	const struct brcmf_tlv *ie;
 
 	while ((ie = brcmf_parse_tlvs(parse, len, WLAN_EID_VENDOR_SPECIFIC))) {
 		if (brcmf_tlv_has_ie((u8 *)ie, &parse, &len,
@@ -1562,9 +1560,9 @@ brcmf_cfg80211_connect(struct wiphy *wiphy, struct net_device *ndev,
 	struct ieee80211_channel *chan = sme->channel;
 	struct brcmf_join_params join_params;
 	size_t join_params_size;
-	struct brcmf_tlv *rsn_ie;
-	struct brcmf_vs_tlv *wpa_ie;
-	void *ie;
+	const struct brcmf_tlv *rsn_ie;
+	const struct brcmf_vs_tlv *wpa_ie;
+	const void *ie;
 	u32 ie_len;
 	struct brcmf_ext_join_params_le *ext_join_params;
 	u16 chanspec;
@@ -1591,7 +1589,8 @@ brcmf_cfg80211_connect(struct wiphy *wiphy, struct net_device *ndev,
 			ie_len = wpa_ie->len + TLV_HDR_LEN;
 		} else {
 			/* find the RSN_IE */
-			rsn_ie = brcmf_parse_tlvs((u8 *)sme->ie, sme->ie_len,
+			rsn_ie = brcmf_parse_tlvs((const u8 *)sme->ie,
+						  sme->ie_len,
 						  WLAN_EID_RSN);
 			if (rsn_ie) {
 				ie = rsn_ie;
@@ -2455,7 +2454,7 @@ static s32 brcmf_update_bss_info(struct brcmf_cfg80211_info *cfg,
 	struct brcmf_cfg80211_profile *profile = ndev_to_prof(ifp->ndev);
 	struct brcmf_bss_info_le *bi;
 	struct brcmf_ssid *ssid;
-	struct brcmf_tlv *tim;
+	const struct brcmf_tlv *tim;
 	u16 beacon_interval;
 	u8 dtim_period;
 	size_t ie_len;
@@ -3220,8 +3219,9 @@ static bool brcmf_valid_wpa_oui(u8 *oui, bool is_rsn_ie)
 }
 
 static s32
-brcmf_configure_wpaie(struct net_device *ndev, struct brcmf_vs_tlv *wpa_ie,
-		     bool is_rsn_ie)
+brcmf_configure_wpaie(struct net_device *ndev,
+		      const struct brcmf_vs_tlv *wpa_ie,
+		      bool is_rsn_ie)
 {
 	struct brcmf_if *ifp = netdev_priv(ndev);
 	u32 auth = 0; /* d11 open authentication */
@@ -3707,11 +3707,11 @@ brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev,
 	s32 ie_offset;
 	struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
 	struct brcmf_if *ifp = netdev_priv(ndev);
-	struct brcmf_tlv *ssid_ie;
+	const struct brcmf_tlv *ssid_ie;
 	struct brcmf_ssid_le ssid_le;
 	s32 err = -EPERM;
-	struct brcmf_tlv *rsn_ie;
-	struct brcmf_vs_tlv *wpa_ie;
+	const struct brcmf_tlv *rsn_ie;
+	const struct brcmf_vs_tlv *wpa_ie;
 	struct brcmf_join_params join_params;
 	enum nl80211_iftype dev_role;
 	struct brcmf_fil_bss_enable_le bss_enable;
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h
index 2dc6a074e8ed..254feed2860e 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h
@@ -491,7 +491,8 @@ void brcmf_free_vif(struct brcmf_cfg80211_vif *vif);
 s32 brcmf_vif_set_mgmt_ie(struct brcmf_cfg80211_vif *vif, s32 pktflag,
 			  const u8 *vndr_ie_buf, u32 vndr_ie_len);
 s32 brcmf_vif_clear_mgmt_ies(struct brcmf_cfg80211_vif *vif);
-struct brcmf_tlv *brcmf_parse_tlvs(void *buf, int buflen, uint key);
+const struct brcmf_tlv *
+brcmf_parse_tlvs(const void *buf, int buflen, uint key);
 u16 channel_to_chanspec(struct brcmu_d11inf *d11inf,
 			struct ieee80211_channel *ch);
 u32 wl_get_vif_state_all(struct brcmf_cfg80211_info *cfg, unsigned long state);
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index d8ad554ce39f..29d27d9b5ebe 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -1078,7 +1078,7 @@ int mwifiex_set_encode(struct mwifiex_private *priv, struct key_params *kp,
 		       const u8 *key, int key_len, u8 key_index,
 		       const u8 *mac_addr, int disable);
 
-int mwifiex_set_gen_ie(struct mwifiex_private *priv, u8 *ie, int ie_len);
+int mwifiex_set_gen_ie(struct mwifiex_private *priv, const u8 *ie, int ie_len);
 
 int mwifiex_get_ver_ext(struct mwifiex_private *priv);
 
diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c
index c5cb2ed19ec2..0bec94351f36 100644
--- a/drivers/net/wireless/mwifiex/sta_ioctl.c
+++ b/drivers/net/wireless/mwifiex/sta_ioctl.c
@@ -1391,7 +1391,7 @@ static int mwifiex_misc_ioctl_gen_ie(struct mwifiex_private *priv,
  * with requisite parameters and calls the IOCTL handler.
  */
 int
-mwifiex_set_gen_ie(struct mwifiex_private *priv, u8 *ie, int ie_len)
+mwifiex_set_gen_ie(struct mwifiex_private *priv, const u8 *ie, int ie_len)
 {
 	struct mwifiex_ds_misc_gen_ie gen_ie;
 
-- 
cgit v1.2.2


From 631ad703ba3a585e96acbfd2ac8c0f0fee1ad99b Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Mon, 20 Jan 2014 23:29:34 +0100
Subject: mac80211: make rate control ops const

Change the code to allow making all the rate control ops
const, nothing ever needs to change them. Also change all
drivers to make use of this and mark the ops const.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/ath/ath9k/rc.c     | 2 +-
 drivers/net/wireless/iwlegacy/3945-rs.c | 2 +-
 drivers/net/wireless/iwlegacy/4965-rs.c | 2 +-
 drivers/net/wireless/iwlwifi/dvm/rs.c   | 3 ++-
 drivers/net/wireless/iwlwifi/mvm/rs.c   | 3 ++-
 drivers/net/wireless/rtlwifi/rc.c       | 2 +-
 6 files changed, 8 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c
index d829bb62a3fc..1219532e908a 100644
--- a/drivers/net/wireless/ath/ath9k/rc.c
+++ b/drivers/net/wireless/ath/ath9k/rc.c
@@ -1466,7 +1466,7 @@ static void ath_rate_free_sta(void *priv, struct ieee80211_sta *sta,
 	kfree(rate_priv);
 }
 
-static struct rate_control_ops ath_rate_ops = {
+static const struct rate_control_ops ath_rate_ops = {
 	.module = NULL,
 	.name = "ath9k_rate_control",
 	.tx_status = ath_tx_status,
diff --git a/drivers/net/wireless/iwlegacy/3945-rs.c b/drivers/net/wireless/iwlegacy/3945-rs.c
index 9a45f6f626f6..7088c6a89455 100644
--- a/drivers/net/wireless/iwlegacy/3945-rs.c
+++ b/drivers/net/wireless/iwlegacy/3945-rs.c
@@ -891,7 +891,7 @@ il3945_rs_rate_init_stub(void *il_r, struct ieee80211_supported_band *sband,
 {
 }
 
-static struct rate_control_ops rs_ops = {
+static const struct rate_control_ops rs_ops = {
 	.module = NULL,
 	.name = RS_NAME,
 	.tx_status = il3945_rs_tx_status,
diff --git a/drivers/net/wireless/iwlegacy/4965-rs.c b/drivers/net/wireless/iwlegacy/4965-rs.c
index 4d5e33259ca8..cdbfc1d30b98 100644
--- a/drivers/net/wireless/iwlegacy/4965-rs.c
+++ b/drivers/net/wireless/iwlegacy/4965-rs.c
@@ -2807,7 +2807,7 @@ il4965_rs_rate_init_stub(void *il_r, struct ieee80211_supported_band *sband,
 {
 }
 
-static struct rate_control_ops rs_4965_ops = {
+static const struct rate_control_ops rs_4965_ops = {
 	.module = NULL,
 	.name = IL4965_RS_NAME,
 	.tx_status = il4965_rs_tx_status,
diff --git a/drivers/net/wireless/iwlwifi/dvm/rs.c b/drivers/net/wireless/iwlwifi/dvm/rs.c
index 0977d93b529d..c4dded8d8091 100644
--- a/drivers/net/wireless/iwlwifi/dvm/rs.c
+++ b/drivers/net/wireless/iwlwifi/dvm/rs.c
@@ -3319,7 +3319,8 @@ static void rs_rate_init_stub(void *priv_r, struct ieee80211_supported_band *sba
 			      struct ieee80211_sta *sta, void *priv_sta)
 {
 }
-static struct rate_control_ops rs_ops = {
+
+static const struct rate_control_ops rs_ops = {
 	.module = NULL,
 	.name = RS_NAME,
 	.tx_status = rs_tx_status,
diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.c b/drivers/net/wireless/iwlwifi/mvm/rs.c
index 6abf74e1351f..22f1953880b6 100644
--- a/drivers/net/wireless/iwlwifi/mvm/rs.c
+++ b/drivers/net/wireless/iwlwifi/mvm/rs.c
@@ -2815,7 +2815,8 @@ static void rs_rate_init_stub(void *mvm_r,
 			      struct ieee80211_sta *sta, void *mvm_sta)
 {
 }
-static struct rate_control_ops rs_mvm_ops = {
+
+static const struct rate_control_ops rs_mvm_ops = {
 	.module = NULL,
 	.name = RS_NAME,
 	.tx_status = rs_tx_status,
diff --git a/drivers/net/wireless/rtlwifi/rc.c b/drivers/net/wireless/rtlwifi/rc.c
index a98acefb8c06..1503d9e5bc9f 100644
--- a/drivers/net/wireless/rtlwifi/rc.c
+++ b/drivers/net/wireless/rtlwifi/rc.c
@@ -260,7 +260,7 @@ static void rtl_rate_free_sta(void *rtlpriv,
 	kfree(rate_priv);
 }
 
-static struct rate_control_ops rtl_rate_ops = {
+static const struct rate_control_ops rtl_rate_ops = {
 	.module = NULL,
 	.name = "rtl_rc",
 	.alloc = rtl_rate_alloc,
-- 
cgit v1.2.2


From 205d242997b57cd0b82f3c8ce4b3c6fd882bf971 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Tue, 21 Jan 2014 00:06:29 +0100
Subject: mac80211_hwsim: make netlink policy const

The netlink policy in hwsim should be const, there's no
reason for it not to be.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/mac80211_hwsim.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 69d4c3179d04..7d132b154f19 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -451,7 +451,7 @@ static struct genl_family hwsim_genl_family = {
 
 /* MAC80211_HWSIM netlink policy */
 
-static struct nla_policy hwsim_genl_policy[HWSIM_ATTR_MAX + 1] = {
+static const struct nla_policy hwsim_genl_policy[HWSIM_ATTR_MAX + 1] = {
 	[HWSIM_ATTR_ADDR_RECEIVER] = { .type = NLA_UNSPEC, .len = ETH_ALEN },
 	[HWSIM_ATTR_ADDR_TRANSMITTER] = { .type = NLA_UNSPEC, .len = ETH_ALEN },
 	[HWSIM_ATTR_FRAME] = { .type = NLA_BINARY,
-- 
cgit v1.2.2


From cc01f9b55fe77831a3ef63c0c461ca76540cee88 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Wed, 22 Jan 2014 10:36:59 +0100
Subject: mac80211: remove module handling from rate control ops

There's not a single rate control algorithm actually in
a separate module where the module refcount would be
required. Similarly, there's no specific rate control
module.

Therefore, all the module handling code in rate control
is really just dead code, so remove it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/ath/ath9k/rc.c     | 1 -
 drivers/net/wireless/iwlegacy/3945-rs.c | 1 -
 drivers/net/wireless/iwlegacy/4965-rs.c | 1 -
 drivers/net/wireless/iwlwifi/dvm/rs.c   | 1 -
 drivers/net/wireless/iwlwifi/mvm/rs.c   | 1 -
 drivers/net/wireless/rtlwifi/rc.c       | 1 -
 6 files changed, 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c
index 1219532e908a..7b5afee141da 100644
--- a/drivers/net/wireless/ath/ath9k/rc.c
+++ b/drivers/net/wireless/ath/ath9k/rc.c
@@ -1467,7 +1467,6 @@ static void ath_rate_free_sta(void *priv, struct ieee80211_sta *sta,
 }
 
 static const struct rate_control_ops ath_rate_ops = {
-	.module = NULL,
 	.name = "ath9k_rate_control",
 	.tx_status = ath_tx_status,
 	.get_rate = ath_get_rate,
diff --git a/drivers/net/wireless/iwlegacy/3945-rs.c b/drivers/net/wireless/iwlegacy/3945-rs.c
index 7088c6a89455..76b0729ade17 100644
--- a/drivers/net/wireless/iwlegacy/3945-rs.c
+++ b/drivers/net/wireless/iwlegacy/3945-rs.c
@@ -892,7 +892,6 @@ il3945_rs_rate_init_stub(void *il_r, struct ieee80211_supported_band *sband,
 }
 
 static const struct rate_control_ops rs_ops = {
-	.module = NULL,
 	.name = RS_NAME,
 	.tx_status = il3945_rs_tx_status,
 	.get_rate = il3945_rs_get_rate,
diff --git a/drivers/net/wireless/iwlegacy/4965-rs.c b/drivers/net/wireless/iwlegacy/4965-rs.c
index cdbfc1d30b98..eaaeea19d8c5 100644
--- a/drivers/net/wireless/iwlegacy/4965-rs.c
+++ b/drivers/net/wireless/iwlegacy/4965-rs.c
@@ -2808,7 +2808,6 @@ il4965_rs_rate_init_stub(void *il_r, struct ieee80211_supported_band *sband,
 }
 
 static const struct rate_control_ops rs_4965_ops = {
-	.module = NULL,
 	.name = IL4965_RS_NAME,
 	.tx_status = il4965_rs_tx_status,
 	.get_rate = il4965_rs_get_rate,
diff --git a/drivers/net/wireless/iwlwifi/dvm/rs.c b/drivers/net/wireless/iwlwifi/dvm/rs.c
index c4dded8d8091..592365ae46b6 100644
--- a/drivers/net/wireless/iwlwifi/dvm/rs.c
+++ b/drivers/net/wireless/iwlwifi/dvm/rs.c
@@ -3321,7 +3321,6 @@ static void rs_rate_init_stub(void *priv_r, struct ieee80211_supported_band *sba
 }
 
 static const struct rate_control_ops rs_ops = {
-	.module = NULL,
 	.name = RS_NAME,
 	.tx_status = rs_tx_status,
 	.get_rate = rs_get_rate,
diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.c b/drivers/net/wireless/iwlwifi/mvm/rs.c
index 22f1953880b6..c49e3a4c63ed 100644
--- a/drivers/net/wireless/iwlwifi/mvm/rs.c
+++ b/drivers/net/wireless/iwlwifi/mvm/rs.c
@@ -2817,7 +2817,6 @@ static void rs_rate_init_stub(void *mvm_r,
 }
 
 static const struct rate_control_ops rs_mvm_ops = {
-	.module = NULL,
 	.name = RS_NAME,
 	.tx_status = rs_tx_status,
 	.get_rate = rs_get_rate,
diff --git a/drivers/net/wireless/rtlwifi/rc.c b/drivers/net/wireless/rtlwifi/rc.c
index 1503d9e5bc9f..ee28a1a3d010 100644
--- a/drivers/net/wireless/rtlwifi/rc.c
+++ b/drivers/net/wireless/rtlwifi/rc.c
@@ -261,7 +261,6 @@ static void rtl_rate_free_sta(void *rtlpriv,
 }
 
 static const struct rate_control_ops rtl_rate_ops = {
-	.module = NULL,
 	.name = "rtl_rc",
 	.alloc = rtl_rate_alloc,
 	.free = rtl_rate_free,
-- 
cgit v1.2.2


From 8c66a3d9d951a645861b9ec5751184723c4480ce Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Fri, 10 Jan 2014 20:07:49 +0100
Subject: mac80211_hwsim: make P2P-Device support optional

When creating new devices, allow P2P-Device support to be
turned off to be able to test default behaviour with and
without the support.

Also add a module parameter for the default setting.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/mac80211_hwsim.c | 53 ++++++++++++++++++++++++++++++-----
 drivers/net/wireless/mac80211_hwsim.h |  2 ++
 2 files changed, 48 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 7d132b154f19..28f8fbe9e54c 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -57,6 +57,10 @@ static bool rctbl = false;
 module_param(rctbl, bool, 0444);
 MODULE_PARM_DESC(rctbl, "Handle rate control table");
 
+static bool support_p2p_device = true;
+module_param(support_p2p_device, bool, 0444);
+MODULE_PARM_DESC(support_p2p_device, "Support P2P-Device interface type");
+
 /**
  * enum hwsim_regtest - the type of regulatory tests we offer
  *
@@ -335,7 +339,8 @@ static const struct ieee80211_iface_limit hwsim_if_limits[] = {
 #endif
 				 BIT(NL80211_IFTYPE_AP) |
 				 BIT(NL80211_IFTYPE_P2P_GO) },
-	{ .max = 1, .types = BIT(NL80211_IFTYPE_P2P_DEVICE) },
+	/* must be last, see hwsim_if_comb */
+	{ .max = 1, .types = BIT(NL80211_IFTYPE_P2P_DEVICE) }
 };
 
 static const struct ieee80211_iface_limit hwsim_if_dfs_limits[] = {
@@ -343,6 +348,27 @@ static const struct ieee80211_iface_limit hwsim_if_dfs_limits[] = {
 };
 
 static const struct ieee80211_iface_combination hwsim_if_comb[] = {
+	{
+		.limits = hwsim_if_limits,
+		/* remove the last entry which is P2P_DEVICE */
+		.n_limits = ARRAY_SIZE(hwsim_if_limits) - 1,
+		.max_interfaces = 2048,
+		.num_different_channels = 1,
+	},
+	{
+		.limits = hwsim_if_dfs_limits,
+		.n_limits = ARRAY_SIZE(hwsim_if_dfs_limits),
+		.max_interfaces = 8,
+		.num_different_channels = 1,
+		.radar_detect_widths = BIT(NL80211_CHAN_WIDTH_20_NOHT) |
+				       BIT(NL80211_CHAN_WIDTH_20) |
+				       BIT(NL80211_CHAN_WIDTH_40) |
+				       BIT(NL80211_CHAN_WIDTH_80) |
+				       BIT(NL80211_CHAN_WIDTH_160),
+	}
+};
+
+static const struct ieee80211_iface_combination hwsim_if_comb_p2p_dev[] = {
 	{
 		.limits = hwsim_if_limits,
 		.n_limits = ARRAY_SIZE(hwsim_if_limits),
@@ -468,6 +494,7 @@ static const struct nla_policy hwsim_genl_policy[HWSIM_ATTR_MAX + 1] = {
 	[HWSIM_ATTR_REG_HINT_ALPHA2] = { .type = NLA_STRING, .len = 2 },
 	[HWSIM_ATTR_REG_CUSTOM_REG] = { .type = NLA_U32 },
 	[HWSIM_ATTR_REG_STRICT_REG] = { .type = NLA_FLAG },
+	[HWSIM_ATTR_SUPPORT_P2P_DEVICE] = { .type = NLA_FLAG },
 };
 
 static void mac80211_hwsim_tx_frame(struct ieee80211_hw *hw,
@@ -1936,7 +1963,7 @@ static struct ieee80211_ops mac80211_hwsim_mchan_ops;
 
 static int mac80211_hwsim_create_radio(int channels, const char *reg_alpha2,
 				       const struct ieee80211_regdomain *regd,
-				       bool reg_strict)
+				       bool reg_strict, bool p2p_device)
 {
 	int err;
 	u8 addr[ETH_ALEN];
@@ -2000,8 +2027,15 @@ static int mac80211_hwsim_create_radio(int channels, const char *reg_alpha2,
 		/* For channels > 1 DFS is not allowed */
 		hw->wiphy->n_iface_combinations = 1;
 		hw->wiphy->iface_combinations = &data->if_combination;
-		data->if_combination = hwsim_if_comb[0];
 		data->if_combination.num_different_channels = data->channels;
+		if (p2p_device)
+			data->if_combination = hwsim_if_comb_p2p_dev[0];
+		else
+			data->if_combination = hwsim_if_comb[0];
+	} else if (p2p_device) {
+		hw->wiphy->iface_combinations = hwsim_if_comb_p2p_dev;
+		hw->wiphy->n_iface_combinations =
+			ARRAY_SIZE(hwsim_if_comb_p2p_dev);
 	} else {
 		hw->wiphy->iface_combinations = hwsim_if_comb;
 		hw->wiphy->n_iface_combinations = ARRAY_SIZE(hwsim_if_comb);
@@ -2017,8 +2051,10 @@ static int mac80211_hwsim_create_radio(int channels, const char *reg_alpha2,
 				     BIT(NL80211_IFTYPE_P2P_CLIENT) |
 				     BIT(NL80211_IFTYPE_P2P_GO) |
 				     BIT(NL80211_IFTYPE_ADHOC) |
-				     BIT(NL80211_IFTYPE_MESH_POINT) |
-				     BIT(NL80211_IFTYPE_P2P_DEVICE);
+				     BIT(NL80211_IFTYPE_MESH_POINT);
+
+	if (p2p_device)
+		hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_P2P_DEVICE);
 
 	hw->flags = IEEE80211_HW_MFP_CAPABLE |
 		    IEEE80211_HW_SIGNAL_DBM |
@@ -2407,6 +2443,7 @@ static int hwsim_create_radio_nl(struct sk_buff *msg, struct genl_info *info)
 	const char *alpha2 = NULL;
 	const struct ieee80211_regdomain *regd = NULL;
 	bool reg_strict = info->attrs[HWSIM_ATTR_REG_STRICT_REG];
+	bool p2p_device = info->attrs[HWSIM_ATTR_SUPPORT_P2P_DEVICE];
 
 	if (info->attrs[HWSIM_ATTR_CHANNELS])
 		chans = nla_get_u32(info->attrs[HWSIM_ATTR_CHANNELS]);
@@ -2422,7 +2459,8 @@ static int hwsim_create_radio_nl(struct sk_buff *msg, struct genl_info *info)
 		regd = hwsim_world_regdom_custom[idx];
 	}
 
-	return mac80211_hwsim_create_radio(chans, alpha2, regd, reg_strict);
+	return mac80211_hwsim_create_radio(chans, alpha2, regd, reg_strict,
+					   p2p_device);
 }
 
 static int hwsim_destroy_radio_nl(struct sk_buff *msg, struct genl_info *info)
@@ -2640,7 +2678,8 @@ static int __init init_mac80211_hwsim(void)
 		}
 
 		err = mac80211_hwsim_create_radio(channels, reg_alpha2,
-						  regd, reg_strict);
+						  regd, reg_strict,
+						  support_p2p_device);
 		if (err < 0)
 			goto out_free_radios;
 	}
diff --git a/drivers/net/wireless/mac80211_hwsim.h b/drivers/net/wireless/mac80211_hwsim.h
index 2747cce5a269..6e72996ec8c1 100644
--- a/drivers/net/wireless/mac80211_hwsim.h
+++ b/drivers/net/wireless/mac80211_hwsim.h
@@ -107,6 +107,7 @@ enum {
  *	(nla string, length 2)
  * @HWSIM_ATTR_REG_CUSTOM_REG: custom regulatory domain index (u32 attribute)
  * @HWSIM_ATTR_REG_STRICT_REG: request REGULATORY_STRICT_REG (flag attribute)
+ * @HWSIM_ATTR_SUPPORT_P2P_DEVICE: support P2P Device virtual interface (flag)
  * @__HWSIM_ATTR_MAX: enum limit
  */
 
@@ -126,6 +127,7 @@ enum {
 	HWSIM_ATTR_REG_HINT_ALPHA2,
 	HWSIM_ATTR_REG_CUSTOM_REG,
 	HWSIM_ATTR_REG_STRICT_REG,
+	HWSIM_ATTR_SUPPORT_P2P_DEVICE,
 	__HWSIM_ATTR_MAX,
 };
 #define HWSIM_ATTR_MAX (__HWSIM_ATTR_MAX - 1)
-- 
cgit v1.2.2


From 0037db63ca71ddbe4473c8e261dcb74d75ff47d2 Mon Sep 17 00:00:00 2001
From: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Date: Mon, 18 Nov 2013 09:46:24 +0200
Subject: mac80211_hwsim: add channel switch support

Advertise to mac80211 that we can do channel switch both
for STA and AP/GO.
After each beacon transmission check if CSA is done and
call ieee80211_csa_finish if needed.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/mac80211_hwsim.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 28f8fbe9e54c..6613489d1066 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -1302,6 +1302,9 @@ static void mac80211_hwsim_beacon_tx(void *arg, u8 *mac,
 
 	mac80211_hwsim_tx_frame(hw, skb,
 				rcu_dereference(vif->chanctx_conf)->def.chan);
+
+	if (vif->csa_active && ieee80211_csa_is_complete(vif))
+		ieee80211_csa_finish(vif);
 }
 
 static enum hrtimer_restart
@@ -2063,13 +2066,15 @@ static int mac80211_hwsim_create_radio(int channels, const char *reg_alpha2,
 		    IEEE80211_HW_AMPDU_AGGREGATION |
 		    IEEE80211_HW_WANT_MONITOR_VIF |
 		    IEEE80211_HW_QUEUE_CONTROL |
-		    IEEE80211_HW_SUPPORTS_HT_CCK_RATES;
+		    IEEE80211_HW_SUPPORTS_HT_CCK_RATES |
+		    IEEE80211_HW_CHANCTX_STA_CSA;
 	if (rctbl)
 		hw->flags |= IEEE80211_HW_SUPPORTS_RC_TABLE;
 
 	hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_TDLS |
 			    WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL |
-			    WIPHY_FLAG_AP_UAPSD;
+			    WIPHY_FLAG_AP_UAPSD |
+			    WIPHY_FLAG_HAS_CHANNEL_SWITCH;
 	hw->wiphy->features |= NL80211_FEATURE_ACTIVE_MONITOR;
 
 	/* ask mac80211 to reserve space for magic */
-- 
cgit v1.2.2


From d8ca16db6bb23d03fcb794df44bae64ae976f27c Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Thu, 23 Jan 2014 16:20:29 +0100
Subject: mac80211: add length check in ieee80211_is_robust_mgmt_frame()

A few places weren't checking that the frame passed to the
function actually has enough data even though the function
clearly documents it must have a payload byte. Make this
safer by changing the function to take an skb and checking
the length inside. The old version is preserved for now as
the rtl* drivers use it and don't have a correct skb.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/rtlwifi/rtl8188ee/trx.c | 2 +-
 drivers/net/wireless/rtlwifi/rtl8192ce/trx.c | 2 +-
 drivers/net/wireless/rtlwifi/rtl8192se/trx.c | 2 +-
 drivers/net/wireless/rtlwifi/rtl8723ae/trx.c | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/trx.c b/drivers/net/wireless/rtlwifi/rtl8188ee/trx.c
index aece6c9cccf1..27ace3054d56 100644
--- a/drivers/net/wireless/rtlwifi/rtl8188ee/trx.c
+++ b/drivers/net/wireless/rtlwifi/rtl8188ee/trx.c
@@ -452,7 +452,7 @@ bool rtl88ee_rx_query_desc(struct ieee80211_hw *hw,
 			/* During testing, hdr was NULL */
 			return false;
 		}
-		if ((ieee80211_is_robust_mgmt_frame(hdr)) &&
+		if ((_ieee80211_is_robust_mgmt_frame(hdr)) &&
 		    (ieee80211_has_protected(hdr->frame_control)))
 			rx_status->flag &= ~RX_FLAG_DECRYPTED;
 		else
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c b/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c
index 52abf0a862fa..114858d46158 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c
@@ -393,7 +393,7 @@ bool rtl92ce_rx_query_desc(struct ieee80211_hw *hw,
 			/* In testing, hdr was NULL here */
 			return false;
 		}
-		if ((ieee80211_is_robust_mgmt_frame(hdr)) &&
+		if ((_ieee80211_is_robust_mgmt_frame(hdr)) &&
 		    (ieee80211_has_protected(hdr->frame_control)))
 			rx_status->flag &= ~RX_FLAG_DECRYPTED;
 		else
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/trx.c b/drivers/net/wireless/rtlwifi/rtl8192se/trx.c
index 27efbcdac6a9..163a681962c6 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192se/trx.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/trx.c
@@ -310,7 +310,7 @@ bool rtl92se_rx_query_desc(struct ieee80211_hw *hw, struct rtl_stats *stats,
 			/* during testing, hdr was NULL here */
 			return false;
 		}
-		if ((ieee80211_is_robust_mgmt_frame(hdr)) &&
+		if ((_ieee80211_is_robust_mgmt_frame(hdr)) &&
 			(ieee80211_has_protected(hdr->frame_control)))
 			rx_status->flag &= ~RX_FLAG_DECRYPTED;
 		else
diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c b/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c
index 50b7be3f3a60..721162cacc3a 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c
@@ -334,7 +334,7 @@ bool rtl8723ae_rx_query_desc(struct ieee80211_hw *hw,
 			/* during testing, hdr could be NULL here */
 			return false;
 		}
-		if ((ieee80211_is_robust_mgmt_frame(hdr)) &&
+		if ((_ieee80211_is_robust_mgmt_frame(hdr)) &&
 			(ieee80211_has_protected(hdr->frame_control)))
 			rx_status->flag &= ~RX_FLAG_DECRYPTED;
 		else
-- 
cgit v1.2.2


From ea73cbce4e1fd93113301532ad98041b119bc85a Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Fri, 24 Jan 2014 10:53:53 +0100
Subject: nl80211: fix scheduled scan RSSI matchset attribute confusion

The scheduled scan matchsets were intended to be a list of filters,
with the found BSS having to pass at least one of them to be passed
to the host. When the RSSI attribute was added, however, this was
broken and currently wpa_supplicant adds that attribute in its own
matchset; however, it doesn't intend that to mean that anything
that passes the RSSI filter should be passed to the host, instead
it wants it to mean that everything needs to also have higher RSSI.

This is semantically problematic because we have a list of filters
like [ SSID1, SSID2, SSID3, RSSI ] with no real indication which
one should be OR'ed and which one AND'ed.

To fix this, move the RSSI filter attribute into each matchset. As
we need to stay backward compatible, treat a matchset with only the
RSSI attribute as a "default RSSI filter" for all other matchsets,
but only if there are other matchsets (an RSSI-only matchset by
itself is still desirable.)

To make driver implementation easier, keep a global min_rssi_thold
for the entire request as well. The only affected driver is ath6kl.

I found this when I looked into the code after Raja Mani submitted
a patch fixing the n_match_sets calculation to disregard the RSSI,
but that patch didn't address the semantic issue.

Reported-by: Raja Mani <rmani@qti.qualcomm.com>
Acked-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/ath/ath6kl/cfg80211.c | 19 ++++++++++++++-----
 drivers/net/wireless/iwlwifi/mvm/scan.c    |  3 +++
 2 files changed, 17 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c
index fd4c89df67e1..eba32f56850a 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.c
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c
@@ -3256,6 +3256,15 @@ static int ath6kl_cfg80211_sscan_start(struct wiphy *wiphy,
 	struct ath6kl_vif *vif = netdev_priv(dev);
 	u16 interval;
 	int ret, rssi_thold;
+	int n_match_sets = request->n_match_sets;
+
+	/*
+	 * If there's a matchset w/o an SSID, then assume it's just for
+	 * the RSSI (nothing else is currently supported) and ignore it.
+	 * The device only supports a global RSSI filter that we set below.
+	 */
+	if (n_match_sets == 1 && !request->match_sets[0].ssid.ssid_len)
+		n_match_sets = 0;
 
 	if (ar->state != ATH6KL_STATE_ON)
 		return -EIO;
@@ -3268,11 +3277,11 @@ static int ath6kl_cfg80211_sscan_start(struct wiphy *wiphy,
 	ret = ath6kl_set_probed_ssids(ar, vif, request->ssids,
 				      request->n_ssids,
 				      request->match_sets,
-				      request->n_match_sets);
+				      n_match_sets);
 	if (ret < 0)
 		return ret;
 
-	if (!request->n_match_sets) {
+	if (!n_match_sets) {
 		ret = ath6kl_wmi_bssfilter_cmd(ar->wmi, vif->fw_vif_idx,
 					       ALL_BSS_FILTER, 0);
 		if (ret < 0)
@@ -3286,12 +3295,12 @@ static int ath6kl_cfg80211_sscan_start(struct wiphy *wiphy,
 
 	if (test_bit(ATH6KL_FW_CAPABILITY_RSSI_SCAN_THOLD,
 		     ar->fw_capabilities)) {
-		if (request->rssi_thold <= NL80211_SCAN_RSSI_THOLD_OFF)
+		if (request->min_rssi_thold <= NL80211_SCAN_RSSI_THOLD_OFF)
 			rssi_thold = 0;
-		else if (request->rssi_thold < -127)
+		else if (request->min_rssi_thold < -127)
 			rssi_thold = -127;
 		else
-			rssi_thold = request->rssi_thold;
+			rssi_thold = request->min_rssi_thold;
 
 		ret = ath6kl_wmi_set_rssi_filter_cmd(ar->wmi, vif->fw_vif_idx,
 						     rssi_thold);
diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c
index 0e0007960612..9674bfd978f1 100644
--- a/drivers/net/wireless/iwlwifi/mvm/scan.c
+++ b/drivers/net/wireless/iwlwifi/mvm/scan.c
@@ -595,6 +595,9 @@ static void iwl_scan_offload_build_ssid(struct cfg80211_sched_scan_request *req,
 	 * config match list.
 	 */
 	for (i = 0; i < req->n_match_sets && i < PROBE_OPTION_MAX; i++) {
+		/* skip empty SSID matchsets */
+		if (!req->match_sets[i].ssid.ssid_len)
+			continue;
 		scan->direct_scan[i].id = WLAN_EID_SSID;
 		scan->direct_scan[i].len = req->match_sets[i].ssid.ssid_len;
 		memcpy(scan->direct_scan[i].ssid, req->match_sets[i].ssid.ssid,
-- 
cgit v1.2.2


From fe94f3a4ffaa20c7470038c69ffc8e545ef5f90a Mon Sep 17 00:00:00 2001
From: Antonio Quartulli <antonio@open-mesh.com>
Date: Wed, 29 Jan 2014 17:53:43 +0100
Subject: cfg80211: fix channel configuration in IBSS join

When receiving an IBSS_JOINED event select the BSS object
based on the {bssid, channel} couple rather than the bssid
only.
With the current approach if another cell having the same
BSSID (but using a different channel) exists then cfg80211
picks up the wrong BSS object.
The result is a mismatching channel configuration between
cfg80211 and the driver, that can lead to any sort of
problem.

The issue can be triggered by having an IBSS sitting on
given channel and then asking the driver to create a new
cell using the same BSSID but with a different frequency.
By passing the channel to cfg80211_get_bss() we can solve
this ambiguity and retrieve/create the correct BSS object.
All the users of cfg80211_ibss_joined() have been changed
accordingly.

Moreover WARN when cfg80211_ibss_joined() gets a NULL
channel as argument and remove a bogus call of the same
function in ath6kl (it does not make sense to call
cfg80211_ibss_joined() with a zero BSSID on ibss-leave).

Cc: Kalle Valo <kvalo@qca.qualcomm.com>
Cc: Arend van Spriel <arend@broadcom.com>
Cc: Bing Zhao <bzhao@marvell.com>
Cc: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Cc: libertas-dev@lists.infradead.org
Acked-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
[minor code cleanup in ath6kl]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/ath/ath6kl/cfg80211.c            | 8 ++------
 drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 4 +++-
 drivers/net/wireless/libertas/cfg.c                   | 3 ++-
 drivers/net/wireless/mwifiex/cfg80211.c               | 3 ++-
 drivers/net/wireless/rndis_wlan.c                     | 4 +++-
 5 files changed, 12 insertions(+), 10 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c
index eba32f56850a..c2c6f4604958 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.c
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c
@@ -790,7 +790,7 @@ void ath6kl_cfg80211_connect_event(struct ath6kl_vif *vif, u16 channel,
 	if (nw_type & ADHOC_NETWORK) {
 		ath6kl_dbg(ATH6KL_DBG_WLAN_CFG, "ad-hoc %s selected\n",
 			   nw_type & ADHOC_CREATOR ? "creator" : "joiner");
-		cfg80211_ibss_joined(vif->ndev, bssid, GFP_KERNEL);
+		cfg80211_ibss_joined(vif->ndev, bssid, chan, GFP_KERNEL);
 		cfg80211_put_bss(ar->wiphy, bss);
 		return;
 	}
@@ -861,13 +861,9 @@ void ath6kl_cfg80211_disconnect_event(struct ath6kl_vif *vif, u8 reason,
 	}
 
 	if (vif->nw_type & ADHOC_NETWORK) {
-		if (vif->wdev.iftype != NL80211_IFTYPE_ADHOC) {
+		if (vif->wdev.iftype != NL80211_IFTYPE_ADHOC)
 			ath6kl_dbg(ATH6KL_DBG_WLAN_CFG,
 				   "%s: ath6k not in ibss mode\n", __func__);
-			return;
-		}
-		memset(bssid, 0, ETH_ALEN);
-		cfg80211_ibss_joined(vif->ndev, bssid, GFP_KERNEL);
 		return;
 	}
 
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
index 3d25c18340c5..1a80bf19cb89 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
@@ -4658,6 +4658,7 @@ brcmf_notify_connect_status(struct brcmf_if *ifp,
 	struct brcmf_cfg80211_info *cfg = ifp->drvr->config;
 	struct net_device *ndev = ifp->ndev;
 	struct brcmf_cfg80211_profile *profile = &ifp->vif->profile;
+	struct ieee80211_channel *chan;
 	s32 err = 0;
 
 	if (ifp->vif->mode == WL_MODE_AP) {
@@ -4665,9 +4666,10 @@ brcmf_notify_connect_status(struct brcmf_if *ifp,
 	} else if (brcmf_is_linkup(e)) {
 		brcmf_dbg(CONN, "Linkup\n");
 		if (brcmf_is_ibssmode(ifp->vif)) {
+			chan = ieee80211_get_channel(cfg->wiphy, cfg->channel);
 			memcpy(profile->bssid, e->addr, ETH_ALEN);
 			wl_inform_ibss(cfg, ndev, e->addr);
-			cfg80211_ibss_joined(ndev, e->addr, GFP_KERNEL);
+			cfg80211_ibss_joined(ndev, e->addr, chan, GFP_KERNEL);
 			clear_bit(BRCMF_VIF_STATUS_CONNECTING,
 				  &ifp->vif->sme_state);
 			set_bit(BRCMF_VIF_STATUS_CONNECTED,
diff --git a/drivers/net/wireless/libertas/cfg.c b/drivers/net/wireless/libertas/cfg.c
index 32f75007a825..2d72a6b4b93e 100644
--- a/drivers/net/wireless/libertas/cfg.c
+++ b/drivers/net/wireless/libertas/cfg.c
@@ -1766,7 +1766,8 @@ static void lbs_join_post(struct lbs_private *priv,
 	memcpy(priv->wdev->ssid, params->ssid, params->ssid_len);
 	priv->wdev->ssid_len = params->ssid_len;
 
-	cfg80211_ibss_joined(priv->dev, bssid, GFP_KERNEL);
+	cfg80211_ibss_joined(priv->dev, bssid, params->chandef.chan,
+			     GFP_KERNEL);
 
 	/* TODO: consider doing this at MACREG_INT_CODE_LINK_SENSED time */
 	priv->connect_status = LBS_CONNECTED;
diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index f4cf9c9d40ec..0948ebe8942e 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -1882,7 +1882,8 @@ mwifiex_cfg80211_join_ibss(struct wiphy *wiphy, struct net_device *dev,
 				     params->privacy);
 done:
 	if (!ret) {
-		cfg80211_ibss_joined(priv->netdev, priv->cfg_bssid, GFP_KERNEL);
+		cfg80211_ibss_joined(priv->netdev, priv->cfg_bssid,
+				     params->chandef.chan, GFP_KERNEL);
 		dev_dbg(priv->adapter->dev,
 			"info: joined/created adhoc network with bssid"
 			" %pM successfully\n", priv->cfg_bssid);
diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c
index 5028557aa18a..2e89a865a67d 100644
--- a/drivers/net/wireless/rndis_wlan.c
+++ b/drivers/net/wireless/rndis_wlan.c
@@ -2835,7 +2835,9 @@ static void rndis_wlan_do_link_up_work(struct usbnet *usbdev)
 					bssid, req_ie, req_ie_len,
 					resp_ie, resp_ie_len, GFP_KERNEL);
 	} else if (priv->infra_mode == NDIS_80211_INFRA_ADHOC)
-		cfg80211_ibss_joined(usbdev->net, bssid, GFP_KERNEL);
+		cfg80211_ibss_joined(usbdev->net, bssid,
+				     get_current_channel(usbdev, NULL),
+				     GFP_KERNEL);
 
 	kfree(info);
 
-- 
cgit v1.2.2


From 0059b2b142b9938118e1ed1ea630c527119425fe Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Wed, 5 Feb 2014 16:36:01 +0200
Subject: mac80211: remove unused radiotap vendor fields in ieee80211_rx_status

The purpose of this housekeeping is to make some room for
VHT flags. The radiotap vendor fields weren't in use.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/ath/wcn36xx/txrx.c |  3 +--
 drivers/net/wireless/mac80211_hwsim.c   | 26 --------------------------
 2 files changed, 1 insertion(+), 28 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/wcn36xx/txrx.c b/drivers/net/wireless/ath/wcn36xx/txrx.c
index b2b60e30caaf..6846f858ef62 100644
--- a/drivers/net/wireless/ath/wcn36xx/txrx.c
+++ b/drivers/net/wireless/ath/wcn36xx/txrx.c
@@ -57,8 +57,7 @@ int wcn36xx_rx_skb(struct wcn36xx *wcn, struct sk_buff *skb)
 		       RX_FLAG_MMIC_STRIPPED |
 		       RX_FLAG_DECRYPTED;
 
-	wcn36xx_dbg(WCN36XX_DBG_RX, "status.flags=%x status->vendor_radiotap_len=%x\n",
-		    status.flag,  status.vendor_radiotap_len);
+	wcn36xx_dbg(WCN36XX_DBG_RX, "status.flags=%x\n", status.flag);
 
 	memcpy(IEEE80211_SKB_RXCB(skb), &status, sizeof(status));
 
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 6613489d1066..f7e3562542fe 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -1062,32 +1062,6 @@ static bool mac80211_hwsim_tx_frame_no_nl(struct ieee80211_hw *hw,
 			ack = true;
 
 		rx_status.mactime = now + data2->tsf_offset;
-#if 0
-		/*
-		 * Don't enable this code by default as the OUI 00:00:00
-		 * is registered to Xerox so we shouldn't use it here, it
-		 * might find its way into pcap files.
-		 * Note that this code requires the headroom in the SKB
-		 * that was allocated earlier.
-		 */
-		rx_status.vendor_radiotap_oui[0] = 0x00;
-		rx_status.vendor_radiotap_oui[1] = 0x00;
-		rx_status.vendor_radiotap_oui[2] = 0x00;
-		rx_status.vendor_radiotap_subns = 127;
-		/*
-		 * Radiotap vendor namespaces can (and should) also be
-		 * split into fields by using the standard radiotap
-		 * presence bitmap mechanism. Use just BIT(0) here for
-		 * the presence bitmap.
-		 */
-		rx_status.vendor_radiotap_bitmap = BIT(0);
-		/* We have 8 bytes of (dummy) data */
-		rx_status.vendor_radiotap_len = 8;
-		/* For testing, also require it to be aligned */
-		rx_status.vendor_radiotap_align = 8;
-		/* push the data */
-		memcpy(skb_push(nskb, 8), "ABCDEFGH", 8);
-#endif
 
 		memcpy(IEEE80211_SKB_RXCB(nskb), &rx_status, sizeof(rx_status));
 		ieee80211_rx_irqsafe(data2->hw, nskb);
-- 
cgit v1.2.2


From 1b8d242adbea881658071efc31d2c0dcf8a44fb7 Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Wed, 5 Feb 2014 16:37:11 +0200
Subject: mac80211: move VHT related RX_FLAG to another variable

ieee80211_rx_status.flags is full. Define a new vht_flag
variable to be able to set more VHT related flags and make
room in flags.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Acked-by: Kalle Valo <kvalo@qca.qualcomm.com> [ath10k]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/ath/ath10k/txrx.c | 4 ++--
 drivers/net/wireless/iwlwifi/mvm/rx.c  | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath10k/txrx.c b/drivers/net/wireless/ath/ath10k/txrx.c
index 74f45fa6f428..27f20e0510f7 100644
--- a/drivers/net/wireless/ath/ath10k/txrx.c
+++ b/drivers/net/wireless/ath/ath10k/txrx.c
@@ -204,7 +204,7 @@ static void process_rx_rates(struct ath10k *ar, struct htt_rx_info *info,
 			break;
 		/* 80MHZ */
 		case 2:
-			status->flag |= RX_FLAG_80MHZ;
+			status->vht_flag |= RX_VHT_FLAG_80MHZ;
 		}
 
 		status->flag |= RX_FLAG_VHT;
@@ -266,7 +266,7 @@ void ath10k_process_rx(struct ath10k *ar, struct htt_rx_info *info)
 		   status->flag & RX_FLAG_HT ? "ht" : "",
 		   status->flag & RX_FLAG_VHT ? "vht" : "",
 		   status->flag & RX_FLAG_40MHZ ? "40" : "",
-		   status->flag & RX_FLAG_80MHZ ? "80" : "",
+		   status->vht_flag & RX_VHT_FLAG_80MHZ ? "80" : "",
 		   status->flag & RX_FLAG_SHORT_GI ? "sgi " : "",
 		   status->rate_idx,
 		   status->vht_nss,
diff --git a/drivers/net/wireless/iwlwifi/mvm/rx.c b/drivers/net/wireless/iwlwifi/mvm/rx.c
index a85b60f7e67e..c67d6375e622 100644
--- a/drivers/net/wireless/iwlwifi/mvm/rx.c
+++ b/drivers/net/wireless/iwlwifi/mvm/rx.c
@@ -364,10 +364,10 @@ int iwl_mvm_rx_rx_mpdu(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb,
 		rx_status.flag |= RX_FLAG_40MHZ;
 		break;
 	case RATE_MCS_CHAN_WIDTH_80:
-		rx_status.flag |= RX_FLAG_80MHZ;
+		rx_status.vht_flag |= RX_VHT_FLAG_80MHZ;
 		break;
 	case RATE_MCS_CHAN_WIDTH_160:
-		rx_status.flag |= RX_FLAG_160MHZ;
+		rx_status.vht_flag |= RX_VHT_FLAG_160MHZ;
 		break;
 	}
 	if (rate_n_flags & RATE_MCS_SGI_MSK)
-- 
cgit v1.2.2


From b18ec27c6502b79e22d5b51ae66e81d683ae686c Mon Sep 17 00:00:00 2001
From: Florian Vaussard <florian.vaussard@epfl.ch>
Date: Fri, 31 Jan 2014 14:34:37 +0100
Subject: can: sja1000: of: add reg-io-width property for 8, 16 and 32-bit
 register access

Add the 'reg-io-width' property for 8, 16 and 32-bit access, like
what is currently done with IORESOURCE_MEM_{8,16,32}BIT for non-OF
boot.

Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Tested-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/sja1000/sja1000_platform.c | 20 ++++++++++++++++++--
 1 file changed, 18 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/can/sja1000/sja1000_platform.c b/drivers/net/can/sja1000/sja1000_platform.c
index b7fbe4f57720..95a844a7ee7b 100644
--- a/drivers/net/can/sja1000/sja1000_platform.c
+++ b/drivers/net/can/sja1000/sja1000_platform.c
@@ -101,8 +101,24 @@ static void sp_populate_of(struct sja1000_priv *priv, struct device_node *of)
 	int err;
 	u32 prop;
 
-	priv->read_reg = sp_read_reg8;
-	priv->write_reg = sp_write_reg8;
+	err = of_property_read_u32(of, "reg-io-width", &prop);
+	if (err)
+		prop = 1; /* 8 bit is default */
+
+	switch (prop) {
+	case 4:
+		priv->read_reg = sp_read_reg32;
+		priv->write_reg = sp_write_reg32;
+		break;
+	case 2:
+		priv->read_reg = sp_read_reg16;
+		priv->write_reg = sp_write_reg16;
+		break;
+	case 1:	/* fallthrough */
+	default:
+		priv->read_reg = sp_read_reg8;
+		priv->write_reg = sp_write_reg8;
+	}
 
 	err = of_property_read_u32(of, "nxp,external-clock-frequency", &prop);
 	if (!err)
-- 
cgit v1.2.2


From b800040db5a7ae2b29271467d9b0e7f4d31ff5a8 Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Mon, 3 Feb 2014 22:17:19 +0200
Subject: iwlwifi: mvm: fix typo in WARNING in rs.c

The current WARNING isn't very helpful.

Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/rs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.c b/drivers/net/wireless/iwlwifi/mvm/rs.c
index 9ec8eca21f50..3b73241db24d 100644
--- a/drivers/net/wireless/iwlwifi/mvm/rs.c
+++ b/drivers/net/wireless/iwlwifi/mvm/rs.c
@@ -905,7 +905,7 @@ static void rs_get_lower_rate_down_column(struct iwl_lq_sta *lq_sta,
 
 		rate->bw = RATE_MCS_CHAN_WIDTH_20;
 
-		WARN_ON_ONCE(rate->index < IWL_RATE_MCS_0_INDEX &&
+		WARN_ON_ONCE(rate->index < IWL_RATE_MCS_0_INDEX ||
 			     rate->index > IWL_RATE_MCS_9_INDEX);
 
 		rate->index = rs_ht_to_legacy[rate->index];
-- 
cgit v1.2.2


From b92e661b401897928040d89b3a9d0cd74ce6e9a1 Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Thu, 23 Jan 2014 17:58:23 +0200
Subject: iwlwifi: mvm: reserve sta_id 0 to station

The d3/d0i3 fw code requires the sta_id to be 0
(this is used to determine the rates and keys
to use in arp offloading).

Reserve sta_id 0 to station interface in order
to comply with this requirement.

Change some functions prototypes in order to
make the allocation function know about
the interface type.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/d3.c       | 27 ---------------------------
 drivers/net/wireless/iwlwifi/mvm/mac80211.c |  3 ++-
 drivers/net/wireless/iwlwifi/mvm/sta.c      | 28 +++++++++++++++++++++-------
 drivers/net/wireless/iwlwifi/mvm/sta.h      |  2 +-
 4 files changed, 24 insertions(+), 36 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/d3.c b/drivers/net/wireless/iwlwifi/mvm/d3.c
index e3a9cec45566..b956e2f0b631 100644
--- a/drivers/net/wireless/iwlwifi/mvm/d3.c
+++ b/drivers/net/wireless/iwlwifi/mvm/d3.c
@@ -963,7 +963,6 @@ static int __iwl_mvm_suspend(struct ieee80211_hw *hw,
 	};
 	int ret, i;
 	int len __maybe_unused;
-	u8 old_aux_sta_id, old_ap_sta_id = IWL_MVM_STATION_COUNT;
 
 	if (!wowlan) {
 		/*
@@ -980,8 +979,6 @@ static int __iwl_mvm_suspend(struct ieee80211_hw *hw,
 
 	mutex_lock(&mvm->mutex);
 
-	old_aux_sta_id = mvm->aux_sta.sta_id;
-
 	/* see if there's only a single BSS vif and it's associated */
 	ieee80211_iterate_active_interfaces_atomic(
 		mvm->hw, IEEE80211_IFACE_ITER_NORMAL,
@@ -1066,16 +1063,6 @@ static int __iwl_mvm_suspend(struct ieee80211_hw *hw,
 
 	iwl_trans_stop_device(mvm->trans);
 
-	/*
-	 * The D3 firmware still hardcodes the AP station ID for the
-	 * BSS we're associated with as 0. Store the real STA ID here
-	 * and assign 0. When we leave this function, we'll restore
-	 * the original value for the resume code.
-	 */
-	old_ap_sta_id = mvm_ap_sta->sta_id;
-	mvm_ap_sta->sta_id = 0;
-	mvmvif->ap_sta_id = 0;
-
 	/*
 	 * Set the HW restart bit -- this is mostly true as we're
 	 * going to load new firmware and reprogram that, though
@@ -1096,16 +1083,6 @@ static int __iwl_mvm_suspend(struct ieee80211_hw *hw,
 	mvm->ptk_ivlen = 0;
 	mvm->ptk_icvlen = 0;
 
-	/*
-	 * The D3 firmware still hardcodes the AP station ID for the
-	 * BSS we're associated with as 0. As a result, we have to move
-	 * the auxiliary station to ID 1 so the ID 0 remains free for
-	 * the AP station for later.
-	 * We set the sta_id to 1 here, and reset it to its previous
-	 * value (that we stored above) later.
-	 */
-	mvm->aux_sta.sta_id = 1;
-
 	ret = iwl_mvm_load_d3_fw(mvm);
 	if (ret)
 		goto out;
@@ -1222,10 +1199,6 @@ static int __iwl_mvm_suspend(struct ieee80211_hw *hw,
 
 	iwl_trans_d3_suspend(mvm->trans, test);
  out:
-	mvm->aux_sta.sta_id = old_aux_sta_id;
-	mvm_ap_sta->sta_id = old_ap_sta_id;
-	mvmvif->ap_sta_id = old_ap_sta_id;
-
 	if (ret < 0)
 		ieee80211_restart_hw(mvm->hw);
  out_noreset:
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index b9b6bfb5b25b..ba4dcabf7c4a 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -703,7 +703,8 @@ static int iwl_mvm_mac_add_interface(struct ieee80211_hw *hw,
 	    vif->type == NL80211_IFTYPE_ADHOC) {
 		u32 qmask = iwl_mvm_mac_get_queues_mask(mvm, vif);
 		ret = iwl_mvm_allocate_int_sta(mvm, &mvmvif->bcast_sta,
-					       qmask);
+					       qmask,
+					       ieee80211_vif_type_p2p(vif));
 		if (ret) {
 			IWL_ERR(mvm, "Failed to allocate bcast sta\n");
 			goto out_release;
diff --git a/drivers/net/wireless/iwlwifi/mvm/sta.c b/drivers/net/wireless/iwlwifi/mvm/sta.c
index fb416c5d4a63..d1da93b79cc6 100644
--- a/drivers/net/wireless/iwlwifi/mvm/sta.c
+++ b/drivers/net/wireless/iwlwifi/mvm/sta.c
@@ -175,19 +175,30 @@ static int iwl_mvm_send_add_sta_key_cmd(struct iwl_mvm *mvm,
 				    &sta_cmd);
 }
 
-static int iwl_mvm_find_free_sta_id(struct iwl_mvm *mvm)
+static int iwl_mvm_find_free_sta_id(struct iwl_mvm *mvm,
+				    enum nl80211_iftype iftype)
 {
 	int sta_id;
+	u32 reserved_ids = 0;
 
+	BUILD_BUG_ON(IWL_MVM_STATION_COUNT > 32);
 	WARN_ON_ONCE(test_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status));
 
 	lockdep_assert_held(&mvm->mutex);
 
+	/* d0i3/d3 assumes the AP's sta_id (of sta vif) is 0. reserve it. */
+	if (iftype != NL80211_IFTYPE_STATION)
+		reserved_ids = BIT(0);
+
 	/* Don't take rcu_read_lock() since we are protected by mvm->mutex */
-	for (sta_id = 0; sta_id < IWL_MVM_STATION_COUNT; sta_id++)
+	for (sta_id = 0; sta_id < IWL_MVM_STATION_COUNT; sta_id++) {
+		if (BIT(sta_id) & reserved_ids)
+			continue;
+
 		if (!rcu_dereference_protected(mvm->fw_id_to_mac_id[sta_id],
 					       lockdep_is_held(&mvm->mutex)))
 			return sta_id;
+	}
 	return IWL_MVM_STATION_COUNT;
 }
 
@@ -312,7 +323,8 @@ int iwl_mvm_add_sta(struct iwl_mvm *mvm,
 	lockdep_assert_held(&mvm->mutex);
 
 	if (!test_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status))
-		sta_id = iwl_mvm_find_free_sta_id(mvm);
+		sta_id = iwl_mvm_find_free_sta_id(mvm,
+						  ieee80211_vif_type_p2p(vif));
 	else
 		sta_id = mvm_sta->sta_id;
 
@@ -564,10 +576,10 @@ int iwl_mvm_rm_sta_id(struct iwl_mvm *mvm,
 }
 
 int iwl_mvm_allocate_int_sta(struct iwl_mvm *mvm, struct iwl_mvm_int_sta *sta,
-			     u32 qmask)
+			     u32 qmask, enum nl80211_iftype iftype)
 {
 	if (!test_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status)) {
-		sta->sta_id = iwl_mvm_find_free_sta_id(mvm);
+		sta->sta_id = iwl_mvm_find_free_sta_id(mvm, iftype);
 		if (WARN_ON_ONCE(sta->sta_id == IWL_MVM_STATION_COUNT))
 			return -ENOSPC;
 	}
@@ -631,7 +643,8 @@ int iwl_mvm_add_aux_sta(struct iwl_mvm *mvm)
 	lockdep_assert_held(&mvm->mutex);
 
 	/* Add the aux station, but without any queues */
-	ret = iwl_mvm_allocate_int_sta(mvm, &mvm->aux_sta, 0);
+	ret = iwl_mvm_allocate_int_sta(mvm, &mvm->aux_sta, 0,
+				       NL80211_IFTYPE_UNSPECIFIED);
 	if (ret)
 		return ret;
 
@@ -703,7 +716,8 @@ int iwl_mvm_add_bcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
 	lockdep_assert_held(&mvm->mutex);
 
 	qmask = iwl_mvm_mac_get_queues_mask(mvm, vif);
-	ret = iwl_mvm_allocate_int_sta(mvm, bsta, qmask);
+	ret = iwl_mvm_allocate_int_sta(mvm, bsta, qmask,
+				       ieee80211_vif_type_p2p(vif));
 	if (ret)
 		return ret;
 
diff --git a/drivers/net/wireless/iwlwifi/mvm/sta.h b/drivers/net/wireless/iwlwifi/mvm/sta.h
index 5ecabddc1dbf..2ed84c421481 100644
--- a/drivers/net/wireless/iwlwifi/mvm/sta.h
+++ b/drivers/net/wireless/iwlwifi/mvm/sta.h
@@ -384,7 +384,7 @@ int iwl_mvm_sta_tx_agg_flush(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
 
 int iwl_mvm_add_aux_sta(struct iwl_mvm *mvm);
 int iwl_mvm_allocate_int_sta(struct iwl_mvm *mvm, struct iwl_mvm_int_sta *sta,
-			     u32 qmask);
+			     u32 qmask, enum nl80211_iftype iftype);
 void iwl_mvm_dealloc_int_sta(struct iwl_mvm *mvm,
 			     struct iwl_mvm_int_sta *sta);
 int iwl_mvm_send_bcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
-- 
cgit v1.2.2


From 2c3e62a14864c630720cd7b123bdd5ba93280ddc Mon Sep 17 00:00:00 2001
From: Ilan Peer <ilan.peer@intel.com>
Date: Sun, 2 Feb 2014 21:54:35 +0200
Subject: iwlwifi: mvm: modify the tsf_id master/slave logic

For TSF master/slave synchronization, the FW does not require
exact match in the beacon interval between the master interface
and the slave one, but instead requires that the beacon interval
of one interface is the module of the other.

Modify the tsf_id selection to align with the above.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c | 76 +++++++++++++++++------------
 1 file changed, 46 insertions(+), 30 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c b/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c
index ba723d50939a..5c21aabb40cb 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c
@@ -90,6 +90,7 @@ static void iwl_mvm_mac_tsf_id_iter(void *_data, u8 *mac,
 {
 	struct iwl_mvm_mac_iface_iterator_data *data = _data;
 	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
+	u16 min_bi;
 
 	/* Skip the interface for which we are trying to assign a tsf_id  */
 	if (vif == data->vif)
@@ -114,42 +115,57 @@ static void iwl_mvm_mac_tsf_id_iter(void *_data, u8 *mac,
 	switch (data->vif->type) {
 	case NL80211_IFTYPE_STATION:
 		/*
-		 * The new interface is client, so if the existing one
-		 * we're iterating is an AP, and both interfaces have the
-		 * same beacon interval, the same TSF should be used to
-		 * avoid drift between the new client and existing AP,
-		 * the existing AP will get drift updates from the new
-		 * client context in this case
+		 * The new interface is a client, so if the one we're iterating
+		 * is an AP, and the beacon interval of the AP is a multiple or
+		 * divisor of the beacon interval of the client, the same TSF
+		 * should be used to avoid drift between the new client and
+		 * existing AP. The existing AP will get drift updates from the
+		 * new client context in this case.
 		 */
-		if (vif->type == NL80211_IFTYPE_AP) {
-			if (data->preferred_tsf == NUM_TSF_IDS &&
-			    test_bit(mvmvif->tsf_id, data->available_tsf_ids) &&
-			    (vif->bss_conf.beacon_int ==
-			     data->vif->bss_conf.beacon_int)) {
-				data->preferred_tsf = mvmvif->tsf_id;
-				return;
-			}
+		if (vif->type != NL80211_IFTYPE_AP ||
+		    data->preferred_tsf != NUM_TSF_IDS ||
+		    !test_bit(mvmvif->tsf_id, data->available_tsf_ids))
+			break;
+
+		min_bi = min(data->vif->bss_conf.beacon_int,
+			     vif->bss_conf.beacon_int);
+
+		if (!min_bi)
+			break;
+
+		if ((data->vif->bss_conf.beacon_int -
+		     vif->bss_conf.beacon_int) % min_bi == 0) {
+			data->preferred_tsf = mvmvif->tsf_id;
+			return;
 		}
 		break;
+
 	case NL80211_IFTYPE_AP:
 		/*
-		 * The new interface is AP/GO, so in case both interfaces
-		 * have the same beacon interval, it should get drift
-		 * updates from an existing client or use the same
-		 * TSF as an existing GO. There's no drift between
-		 * TSFs internally but if they used different TSFs
-		 * then a new client MAC could update one of them
-		 * and cause drift that way.
+		 * The new interface is AP/GO, so if its beacon interval is a
+		 * multiple or a divisor of the beacon interval of an existing
+		 * interface, it should get drift updates from an existing
+		 * client or use the same TSF as an existing GO. There's no
+		 * drift between TSFs internally but if they used different
+		 * TSFs then a new client MAC could update one of them and
+		 * cause drift that way.
 		 */
-		if (vif->type == NL80211_IFTYPE_STATION ||
-		    vif->type == NL80211_IFTYPE_AP) {
-			if (data->preferred_tsf == NUM_TSF_IDS &&
-			    test_bit(mvmvif->tsf_id, data->available_tsf_ids) &&
-			    (vif->bss_conf.beacon_int ==
-			     data->vif->bss_conf.beacon_int)) {
-				data->preferred_tsf = mvmvif->tsf_id;
-				return;
-			}
+		if ((vif->type != NL80211_IFTYPE_AP &&
+		     vif->type != NL80211_IFTYPE_STATION) ||
+		    data->preferred_tsf != NUM_TSF_IDS ||
+		    !test_bit(mvmvif->tsf_id, data->available_tsf_ids))
+			break;
+
+		min_bi = min(data->vif->bss_conf.beacon_int,
+			     vif->bss_conf.beacon_int);
+
+		if (!min_bi)
+			break;
+
+		if ((data->vif->bss_conf.beacon_int -
+		     vif->bss_conf.beacon_int) % min_bi == 0) {
+			data->preferred_tsf = mvmvif->tsf_id;
+			return;
 		}
 		break;
 	default:
-- 
cgit v1.2.2


From 15ef4137928738fd9c7024597a6dbce1ed186d1e Mon Sep 17 00:00:00 2001
From: Ariej Marjieh <ariej.marjieh@intel.com>
Date: Tue, 31 Dec 2013 18:52:13 +0200
Subject: iwlwifi: mvm: remove upper limit for error log base pointer

Newer NIC have different memory layout in their SRAM,
so change the checks in iwl_mvm_dump_nic_error_log
accordingly.

Signed-off-by: Ariej Marjieh <ariej.marjieh@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/utils.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/utils.c b/drivers/net/wireless/iwlwifi/mvm/utils.c
index 7440ffa766e6..68b7face11af 100644
--- a/drivers/net/wireless/iwlwifi/mvm/utils.c
+++ b/drivers/net/wireless/iwlwifi/mvm/utils.c
@@ -394,7 +394,7 @@ void iwl_mvm_dump_nic_error_log(struct iwl_mvm *mvm)
 			base = mvm->fw->inst_errlog_ptr;
 	}
 
-	if (base < 0x800000 || base >= 0x80C000) {
+	if (base < 0x800000) {
 		IWL_ERR(mvm,
 			"Not valid error log pointer 0x%08X for %s uCode\n",
 			base,
-- 
cgit v1.2.2


From 9d91356bdc140f2b21c9744d4600fce4af2e4a79 Mon Sep 17 00:00:00 2001
From: Ariej Marjieh <ariej.marjieh@intel.com>
Date: Mon, 3 Feb 2014 23:34:47 +0200
Subject: iwlwifi: 8000: add 11n only SKU of 8000 devices

The 8000 family includes devices that don't support 11ac.
Add an iwl_cfg structure for them.

Signed-off-by: Ariej Marjieh <ariej.marjieh@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-8000.c   | 9 +++++++++
 drivers/net/wireless/iwlwifi/iwl-config.h | 1 +
 2 files changed, 10 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-8000.c b/drivers/net/wireless/iwlwifi/iwl-8000.c
index 81c12245c01f..f5bd82b88592 100644
--- a/drivers/net/wireless/iwlwifi/iwl-8000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-8000.c
@@ -120,4 +120,13 @@ const struct iwl_cfg iwl8260_2ac_cfg = {
 	.nvm_calib_ver = IWL8000_TX_POWER_VERSION,
 };
 
+const struct iwl_cfg iwl8260_n_cfg = {
+	.name = "Intel(R) Dual Band Wireless-AC 8260",
+	.fw_name_pre = IWL8000_FW_PRE,
+	IWL_DEVICE_8000,
+	.ht_params = &iwl8000_ht_params,
+	.nvm_ver = IWL8000_NVM_VERSION,
+	.nvm_calib_ver = IWL8000_TX_POWER_VERSION,
+};
+
 MODULE_FIRMWARE(IWL8000_MODULE_FIRMWARE(IWL8000_UCODE_API_OK));
diff --git a/drivers/net/wireless/iwlwifi/iwl-config.h b/drivers/net/wireless/iwlwifi/iwl-config.h
index 2ce89d837194..13ec56607d10 100644
--- a/drivers/net/wireless/iwlwifi/iwl-config.h
+++ b/drivers/net/wireless/iwlwifi/iwl-config.h
@@ -324,6 +324,7 @@ extern const struct iwl_cfg iwl7265_2ac_cfg;
 extern const struct iwl_cfg iwl7265_2n_cfg;
 extern const struct iwl_cfg iwl7265_n_cfg;
 extern const struct iwl_cfg iwl8260_2ac_cfg;
+extern const struct iwl_cfg iwl8260_n_cfg;
 #endif /* CONFIG_IWLMVM */
 
 #endif /* __IWL_CONFIG_H__ */
-- 
cgit v1.2.2


From 01a9ca510ba4413895d4add6f26665d6c37a5413 Mon Sep 17 00:00:00 2001
From: Eran Harary <eran.harary@intel.com>
Date: Mon, 3 Feb 2014 09:29:57 +0200
Subject: iwlwifi: mvm: support alive notification api version2

Alive notification ver2 support error table information
for 2 CPUs.
This is useful to fetch the error information in case of
firmware assert.

Signed-off-by: Eran Harary <eran.harary@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/fw-api.h | 29 +++++++++++++++
 drivers/net/wireless/iwlwifi/mvm/fw.c     | 52 ++++++++++++++++++++------
 drivers/net/wireless/iwlwifi/mvm/mvm.h    |  2 +
 drivers/net/wireless/iwlwifi/mvm/utils.c  | 61 +++++++++++++++++++++++++++++++
 4 files changed, 132 insertions(+), 12 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/iwlwifi/mvm/fw-api.h
index 3bf5f82658c5..a7c88f1402e9 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api.h
@@ -411,6 +411,35 @@ struct mvm_alive_resp {
 	__le32 scd_base_ptr;		/* SRAM address for SCD */
 } __packed; /* ALIVE_RES_API_S_VER_1 */
 
+struct mvm_alive_resp_ver2 {
+	__le16 status;
+	__le16 flags;
+	u8 ucode_minor;
+	u8 ucode_major;
+	__le16 id;
+	u8 api_minor;
+	u8 api_major;
+	u8 ver_subtype;
+	u8 ver_type;
+	u8 mac;
+	u8 opt;
+	__le16 reserved2;
+	__le32 timestamp;
+	__le32 error_event_table_ptr;	/* SRAM address for error log */
+	__le32 log_event_table_ptr;	/* SRAM address for LMAC event log */
+	__le32 cpu_register_ptr;
+	__le32 dbgm_config_ptr;
+	__le32 alive_counter_ptr;
+	__le32 scd_base_ptr;		/* SRAM address for SCD */
+	__le32 st_fwrd_addr;		/* pointer to Store and forward */
+	__le32 st_fwrd_size;
+	u8 umac_minor;			/* UMAC version: minor */
+	u8 umac_major;			/* UMAC version: major */
+	__le16 umac_id;			/* UMAC version: id */
+	__le32 error_info_addr;		/* SRAM address for UMAC error log */
+	__le32 dbg_print_buff_addr;
+} __packed; /* ALIVE_RES_API_S_VER_2 */
+
 /* Error response/notification */
 enum {
 	FW_ERR_UNKNOWN_CMD = 0x0,
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw.c b/drivers/net/wireless/iwlwifi/mvm/fw.c
index 155bb20519c2..bae75b308fc0 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw.c
+++ b/drivers/net/wireless/iwlwifi/mvm/fw.c
@@ -110,18 +110,46 @@ static bool iwl_alive_fn(struct iwl_notif_wait_data *notif_wait,
 		container_of(notif_wait, struct iwl_mvm, notif_wait);
 	struct iwl_mvm_alive_data *alive_data = data;
 	struct mvm_alive_resp *palive;
-
-	palive = (void *)pkt->data;
-
-	mvm->error_event_table = le32_to_cpu(palive->error_event_table_ptr);
-	mvm->log_event_table = le32_to_cpu(palive->log_event_table_ptr);
-	alive_data->scd_base_addr = le32_to_cpu(palive->scd_base_ptr);
-
-	alive_data->valid = le16_to_cpu(palive->status) == IWL_ALIVE_STATUS_OK;
-	IWL_DEBUG_FW(mvm,
-		     "Alive ucode status 0x%04x revision 0x%01X 0x%01X flags 0x%01X\n",
-		     le16_to_cpu(palive->status), palive->ver_type,
-		     palive->ver_subtype, palive->flags);
+	struct mvm_alive_resp_ver2 *palive2;
+
+	if (iwl_rx_packet_payload_len(pkt) == sizeof(*palive)) {
+		palive = (void *)pkt->data;
+
+		mvm->support_umac_log = false;
+		mvm->error_event_table =
+			le32_to_cpu(palive->error_event_table_ptr);
+		mvm->log_event_table = le32_to_cpu(palive->log_event_table_ptr);
+		alive_data->scd_base_addr = le32_to_cpu(palive->scd_base_ptr);
+
+		alive_data->valid = le16_to_cpu(palive->status) ==
+				    IWL_ALIVE_STATUS_OK;
+		IWL_DEBUG_FW(mvm,
+			     "Alive VER1 ucode status 0x%04x revision 0x%01X 0x%01X flags 0x%01X\n",
+			     le16_to_cpu(palive->status), palive->ver_type,
+			     palive->ver_subtype, palive->flags);
+	} else {
+		palive2 = (void *)pkt->data;
+
+		mvm->support_umac_log = true;
+		mvm->error_event_table =
+			le32_to_cpu(palive2->error_event_table_ptr);
+		mvm->log_event_table =
+			le32_to_cpu(palive2->log_event_table_ptr);
+		alive_data->scd_base_addr = le32_to_cpu(palive2->scd_base_ptr);
+		mvm->umac_error_event_table =
+			le32_to_cpu(palive2->error_info_addr);
+
+		alive_data->valid = le16_to_cpu(palive2->status) ==
+				    IWL_ALIVE_STATUS_OK;
+		IWL_DEBUG_FW(mvm,
+			     "Alive VER2 ucode status 0x%04x revision 0x%01X 0x%01X flags 0x%01X\n",
+			     le16_to_cpu(palive2->status), palive2->ver_type,
+			     palive2->ver_subtype, palive2->flags);
+
+		IWL_DEBUG_FW(mvm,
+			     "UMAC version: Major - 0x%x, Minor - 0x%x\n",
+			     palive2->umac_major, palive2->umac_minor);
+	}
 
 	return true;
 }
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index ab6e1e9706db..ebea5f2e2741 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -457,6 +457,8 @@ struct iwl_mvm {
 	bool init_ucode_complete;
 	u32 error_event_table;
 	u32 log_event_table;
+	u32 umac_error_event_table;
+	bool support_umac_log;
 
 	u32 ampdu_ref;
 
diff --git a/drivers/net/wireless/iwlwifi/mvm/utils.c b/drivers/net/wireless/iwlwifi/mvm/utils.c
index 68b7face11af..f4598cb2dd2e 100644
--- a/drivers/net/wireless/iwlwifi/mvm/utils.c
+++ b/drivers/net/wireless/iwlwifi/mvm/utils.c
@@ -376,9 +376,67 @@ struct iwl_error_event_table {
 	u32 flow_handler;	/* FH read/write pointers, RX credit */
 } __packed;
 
+/*
+ * UMAC error struct - relevant starting from family 8000 chip.
+ * Note: This structure is read from the device with IO accesses,
+ * and the reading already does the endian conversion. As it is
+ * read with u32-sized accesses, any members with a different size
+ * need to be ordered correctly though!
+ */
+struct iwl_umac_error_event_table {
+	u32 valid;		/* (nonzero) valid, (0) log is empty */
+	u32 error_id;		/* type of error */
+	u32 pc;			/* program counter */
+	u32 blink1;		/* branch link */
+	u32 blink2;		/* branch link */
+	u32 ilink1;		/* interrupt link */
+	u32 ilink2;		/* interrupt link */
+	u32 data1;		/* error-specific data */
+	u32 data2;		/* error-specific data */
+	u32 line;		/* source code line of error */
+	u32 umac_ver;		/* umac version */
+} __packed;
+
 #define ERROR_START_OFFSET  (1 * sizeof(u32))
 #define ERROR_ELEM_SIZE     (7 * sizeof(u32))
 
+static void iwl_mvm_dump_umac_error_log(struct iwl_mvm *mvm)
+{
+	struct iwl_trans *trans = mvm->trans;
+	struct iwl_umac_error_event_table table;
+	u32 base;
+
+	base = mvm->umac_error_event_table;
+
+	if (base < 0x800000 || base >= 0x80C000) {
+		IWL_ERR(mvm,
+			"Not valid error log pointer 0x%08X for %s uCode\n",
+			base,
+			(mvm->cur_ucode == IWL_UCODE_INIT)
+					? "Init" : "RT");
+		return;
+	}
+
+	iwl_trans_read_mem_bytes(trans, base, &table, sizeof(table));
+
+	if (ERROR_START_OFFSET <= table.valid * ERROR_ELEM_SIZE) {
+		IWL_ERR(trans, "Start IWL Error Log Dump:\n");
+		IWL_ERR(trans, "Status: 0x%08lX, count: %d\n",
+			mvm->status, table.valid);
+	}
+
+	IWL_ERR(mvm, "0x%08X | %-28s\n", table.error_id,
+		desc_lookup(table.error_id));
+	IWL_ERR(mvm, "0x%08X | umac uPc\n", table.pc);
+	IWL_ERR(mvm, "0x%08X | umac branchlink1\n", table.blink1);
+	IWL_ERR(mvm, "0x%08X | umac branchlink2\n", table.blink2);
+	IWL_ERR(mvm, "0x%08X | umac interruptlink1\n", table.ilink1);
+	IWL_ERR(mvm, "0x%08X | umac interruptlink2\n", table.ilink2);
+	IWL_ERR(mvm, "0x%08X | umac data1\n", table.data1);
+	IWL_ERR(mvm, "0x%08X | umac data2\n", table.data2);
+	IWL_ERR(mvm, "0x%08X | umac version\n", table.umac_ver);
+}
+
 void iwl_mvm_dump_nic_error_log(struct iwl_mvm *mvm)
 {
 	struct iwl_trans *trans = mvm->trans;
@@ -451,6 +509,9 @@ void iwl_mvm_dump_nic_error_log(struct iwl_mvm *mvm)
 	IWL_ERR(mvm, "0x%08X | lmpm_pmg_sel\n", table.lmpm_pmg_sel);
 	IWL_ERR(mvm, "0x%08X | timestamp\n", table.u_timestamp);
 	IWL_ERR(mvm, "0x%08X | flow_handler\n", table.flow_handler);
+
+	if (mvm->support_umac_log)
+		iwl_mvm_dump_umac_error_log(mvm);
 }
 
 void iwl_mvm_dump_sram(struct iwl_mvm *mvm)
-- 
cgit v1.2.2


From 3281bd4c436138351b65dff3f7ccfddeb5f02d13 Mon Sep 17 00:00:00 2001
From: Ariej Marjieh <ariej.marjieh@intel.com>
Date: Sun, 2 Feb 2014 06:00:01 +0200
Subject: iwlwifi: change number of PAPD groups in PHY DB

The number of the PAPD group was increased in new devices.
Since we might now get empty entries on older devices, don't
warn if an entry is empty.

Signed-off-by: Ariej Marjieh <ariej.marjieh@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-phy-db.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-phy-db.c b/drivers/net/wireless/iwlwifi/iwl-phy-db.c
index fa77d63a277a..b761ac4822a3 100644
--- a/drivers/net/wireless/iwlwifi/iwl-phy-db.c
+++ b/drivers/net/wireless/iwlwifi/iwl-phy-db.c
@@ -72,7 +72,7 @@
 #include "iwl-trans.h"
 
 #define CHANNEL_NUM_SIZE	4	/* num of channels in calib_ch size */
-#define IWL_NUM_PAPD_CH_GROUPS	4
+#define IWL_NUM_PAPD_CH_GROUPS	7
 #define IWL_NUM_TXP_CH_GROUPS	9
 
 struct iwl_phy_db_entry {
@@ -383,7 +383,7 @@ static int iwl_phy_db_send_all_channel_groups(
 		if (!entry)
 			return -EINVAL;
 
-		if (WARN_ON_ONCE(!entry->size))
+		if (!entry->size)
 			continue;
 
 		/* Send the requested PHY DB section */
-- 
cgit v1.2.2


From b59ec8dd4394cf11e3253e849a04734be6d3d694 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Fri, 7 Feb 2014 10:44:50 +0100
Subject: mac80211_hwsim: fix number of channels in interface combinations

There's little point in setting the number of channels if the
entire combination struct is overwritten again later - that
was clearly intended the other way around, fix it.

Reported-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/mac80211_hwsim.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index f7e3562542fe..771b8c573bff 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -2004,11 +2004,11 @@ static int mac80211_hwsim_create_radio(int channels, const char *reg_alpha2,
 		/* For channels > 1 DFS is not allowed */
 		hw->wiphy->n_iface_combinations = 1;
 		hw->wiphy->iface_combinations = &data->if_combination;
-		data->if_combination.num_different_channels = data->channels;
 		if (p2p_device)
 			data->if_combination = hwsim_if_comb_p2p_dev[0];
 		else
 			data->if_combination = hwsim_if_comb[0];
+		data->if_combination.num_different_channels = data->channels;
 	} else if (p2p_device) {
 		hw->wiphy->iface_combinations = hwsim_if_comb_p2p_dev;
 		hw->wiphy->n_iface_combinations =
-- 
cgit v1.2.2


From 17a50ee4bd47bdba94546e0526fc9ce93dc77d5e Mon Sep 17 00:00:00 2001
From: Yoann DI RUZZA <ydiruzza@gmail.com>
Date: Tue, 11 Feb 2014 09:46:59 +0100
Subject: can: at91_can: add listen only mode

This patch adds listen only mode support to the at91_can driver.

Signed-off-by: Yoann DI-RUZZA <ydiruzza@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/at91_can.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c
index 6efe27458116..1d00b95f8983 100644
--- a/drivers/net/can/at91_can.c
+++ b/drivers/net/can/at91_can.c
@@ -420,7 +420,11 @@ static void at91_chip_start(struct net_device *dev)
 	at91_transceiver_switch(priv, 1);
 
 	/* enable chip */
-	at91_write(priv, AT91_MR, AT91_MR_CANEN);
+	if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY)
+		reg_mr = AT91_MR_CANEN | AT91_MR_ABM;
+	else
+		reg_mr = AT91_MR_CANEN;
+	at91_write(priv, AT91_MR, reg_mr);
 
 	priv->can.state = CAN_STATE_ERROR_ACTIVE;
 
@@ -1341,7 +1345,8 @@ static int at91_can_probe(struct platform_device *pdev)
 	priv->can.bittiming_const = &at91_bittiming_const;
 	priv->can.do_set_mode = at91_set_mode;
 	priv->can.do_get_berr_counter = at91_get_berr_counter;
-	priv->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES;
+	priv->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES |
+		CAN_CTRLMODE_LISTENONLY;
 	priv->dev = dev;
 	priv->reg_base = addr;
 	priv->devtype_data = *devtype_data;
-- 
cgit v1.2.2


From 361c3e0485c737b9c8a2d456b8c3c7b08d8ca8ee Mon Sep 17 00:00:00 2001
From: Luciano Coelho <luciano.coelho@intel.com>
Date: Mon, 10 Feb 2014 15:23:03 +0200
Subject: mac80211_hwsim: allow creation of single-channel radios with chanctx

Add a new HWSIM_ATTR_USE_CHANCTX attribute to the
HWSIM_CMD_CREATE_RADIO command to allow the creation of radios with
one channel that use channel contexts.  If this attribute is not
present, the behaviour is the same as before (ie. single channel
radios don't use channel contexts and multi channel radios do).

Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/mac80211_hwsim.c | 29 +++++++++++++++++++++--------
 drivers/net/wireless/mac80211_hwsim.h |  4 ++++
 2 files changed, 25 insertions(+), 8 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 771b8c573bff..9d7a52f5a410 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -411,6 +411,7 @@ struct mac80211_hwsim_data {
 
 	struct mac_address addresses[2];
 	int channels, idx;
+	bool use_chanctx;
 
 	struct ieee80211_channel *tmp_chan;
 	struct delayed_work roc_done;
@@ -1088,7 +1089,7 @@ static void mac80211_hwsim_tx(struct ieee80211_hw *hw,
 		return;
 	}
 
-	if (data->channels == 1) {
+	if (!data->use_chanctx) {
 		channel = data->channel;
 	} else if (txi->hw_queue == 4) {
 		channel = data->tmp_chan;
@@ -1354,7 +1355,7 @@ static int mac80211_hwsim_config(struct ieee80211_hw *hw, u32 changed)
 
 	data->channel = conf->chandef.chan;
 
-	WARN_ON(data->channel && data->channels > 1);
+	WARN_ON(data->channel && data->use_chanctx);
 
 	data->power_level = conf->power_level;
 	if (!data->started || !data->beacon_int)
@@ -1940,7 +1941,8 @@ static struct ieee80211_ops mac80211_hwsim_mchan_ops;
 
 static int mac80211_hwsim_create_radio(int channels, const char *reg_alpha2,
 				       const struct ieee80211_regdomain *regd,
-				       bool reg_strict, bool p2p_device)
+				       bool reg_strict, bool p2p_device,
+				       bool use_chanctx)
 {
 	int err;
 	u8 addr[ETH_ALEN];
@@ -1950,11 +1952,14 @@ static int mac80211_hwsim_create_radio(int channels, const char *reg_alpha2,
 	const struct ieee80211_ops *ops = &mac80211_hwsim_ops;
 	int idx;
 
+	if (WARN_ON(channels > 1 && !use_chanctx))
+		return -EINVAL;
+
 	spin_lock_bh(&hwsim_radio_lock);
 	idx = hwsim_radio_idx++;
 	spin_unlock_bh(&hwsim_radio_lock);
 
-	if (channels > 1)
+	if (use_chanctx)
 		ops = &mac80211_hwsim_mchan_ops;
 	hw = ieee80211_alloc_hw(sizeof(*data), ops);
 	if (!hw) {
@@ -1995,9 +2000,10 @@ static int mac80211_hwsim_create_radio(int channels, const char *reg_alpha2,
 	hw->wiphy->addresses = data->addresses;
 
 	data->channels = channels;
+	data->use_chanctx = use_chanctx;
 	data->idx = idx;
 
-	if (data->channels > 1) {
+	if (data->use_chanctx) {
 		hw->wiphy->max_scan_ssids = 255;
 		hw->wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN;
 		hw->wiphy->max_remain_on_channel_duration = 1000;
@@ -2156,7 +2162,7 @@ static int mac80211_hwsim_create_radio(int channels, const char *reg_alpha2,
 	debugfs_create_file("ps", 0666, data->debugfs, data, &hwsim_fops_ps);
 	debugfs_create_file("group", 0666, data->debugfs, data,
 			    &hwsim_fops_group);
-	if (data->channels == 1)
+	if (!data->use_chanctx)
 		debugfs_create_file("dfs_simulate_radar", 0222,
 				    data->debugfs,
 				    data, &hwsim_simulate_radar);
@@ -2423,10 +2429,16 @@ static int hwsim_create_radio_nl(struct sk_buff *msg, struct genl_info *info)
 	const struct ieee80211_regdomain *regd = NULL;
 	bool reg_strict = info->attrs[HWSIM_ATTR_REG_STRICT_REG];
 	bool p2p_device = info->attrs[HWSIM_ATTR_SUPPORT_P2P_DEVICE];
+	bool use_chanctx;
 
 	if (info->attrs[HWSIM_ATTR_CHANNELS])
 		chans = nla_get_u32(info->attrs[HWSIM_ATTR_CHANNELS]);
 
+	if (info->attrs[HWSIM_ATTR_USE_CHANCTX])
+		use_chanctx = true;
+	else
+		use_chanctx = (chans > 1);
+
 	if (info->attrs[HWSIM_ATTR_REG_HINT_ALPHA2])
 		alpha2 = nla_data(info->attrs[HWSIM_ATTR_REG_HINT_ALPHA2]);
 
@@ -2439,7 +2451,7 @@ static int hwsim_create_radio_nl(struct sk_buff *msg, struct genl_info *info)
 	}
 
 	return mac80211_hwsim_create_radio(chans, alpha2, regd, reg_strict,
-					   p2p_device);
+					   p2p_device, use_chanctx);
 }
 
 static int hwsim_destroy_radio_nl(struct sk_buff *msg, struct genl_info *info)
@@ -2658,7 +2670,8 @@ static int __init init_mac80211_hwsim(void)
 
 		err = mac80211_hwsim_create_radio(channels, reg_alpha2,
 						  regd, reg_strict,
-						  support_p2p_device);
+						  support_p2p_device,
+						  channels > 1);
 		if (err < 0)
 			goto out_free_radios;
 	}
diff --git a/drivers/net/wireless/mac80211_hwsim.h b/drivers/net/wireless/mac80211_hwsim.h
index 6e72996ec8c1..c9d0315575ba 100644
--- a/drivers/net/wireless/mac80211_hwsim.h
+++ b/drivers/net/wireless/mac80211_hwsim.h
@@ -108,6 +108,9 @@ enum {
  * @HWSIM_ATTR_REG_CUSTOM_REG: custom regulatory domain index (u32 attribute)
  * @HWSIM_ATTR_REG_STRICT_REG: request REGULATORY_STRICT_REG (flag attribute)
  * @HWSIM_ATTR_SUPPORT_P2P_DEVICE: support P2P Device virtual interface (flag)
+ * @HWSIM_ATTR_USE_CHANCTX: used with the %HWSIM_CMD_CREATE_RADIO
+ *	command to force use of channel contexts even when only a
+ *	single channel is supported
  * @__HWSIM_ATTR_MAX: enum limit
  */
 
@@ -128,6 +131,7 @@ enum {
 	HWSIM_ATTR_REG_CUSTOM_REG,
 	HWSIM_ATTR_REG_STRICT_REG,
 	HWSIM_ATTR_SUPPORT_P2P_DEVICE,
+	HWSIM_ATTR_USE_CHANCTX,
 	__HWSIM_ATTR_MAX,
 };
 #define HWSIM_ATTR_MAX (__HWSIM_ATTR_MAX - 1)
-- 
cgit v1.2.2


From 4effc6fda7ab2fc10f640601359a63b04ad8f382 Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Mon, 20 Jan 2014 15:27:12 +0100
Subject: ath9k: prepare for multi-interface CSA support

Soon mac80211 will support multi-interface CSA so
using sc->csa_vif is not an option.

Instead just depend on vif->csa_active. Calling
ieee80211_csa_finish() multiple number of times
should not be an issue.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ath9k.h  |  4 ++--
 drivers/net/wireless/ath/ath9k/beacon.c | 29 +++++++++++++++++++----------
 drivers/net/wireless/ath/ath9k/main.c   | 12 ++----------
 drivers/net/wireless/ath/ath9k/xmit.c   |  2 +-
 4 files changed, 24 insertions(+), 23 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index b5ac32cfbeb8..7fde8ecb6ea1 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -442,7 +442,8 @@ void ath9k_beacon_config(struct ath_softc *sc, struct ieee80211_vif *vif,
 void ath9k_beacon_assign_slot(struct ath_softc *sc, struct ieee80211_vif *vif);
 void ath9k_beacon_remove_slot(struct ath_softc *sc, struct ieee80211_vif *vif);
 void ath9k_set_beacon(struct ath_softc *sc);
-bool ath9k_csa_is_finished(struct ath_softc *sc);
+bool ath9k_csa_is_finished(struct ath_softc *sc, struct ieee80211_vif *vif);
+void ath9k_csa_update(struct ath_softc *sc);
 
 /*******************/
 /* Link Monitoring */
@@ -774,7 +775,6 @@ struct ath_softc {
 #endif
 
 	struct ath_descdma txsdma;
-	struct ieee80211_vif *csa_vif;
 
 	struct ath_ant_comb ant_comb;
 	u8 ant_tx, ant_rx;
diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c
index 2e8bba0eb361..32d00e8cfd0c 100644
--- a/drivers/net/wireless/ath/ath9k/beacon.c
+++ b/drivers/net/wireless/ath/ath9k/beacon.c
@@ -292,11 +292,8 @@ static void ath9k_set_tsfadjust(struct ath_softc *sc, struct ieee80211_vif *vif)
 		(unsigned long long)tsfadjust, avp->av_bslot);
 }
 
-bool ath9k_csa_is_finished(struct ath_softc *sc)
+bool ath9k_csa_is_finished(struct ath_softc *sc, struct ieee80211_vif *vif)
 {
-	struct ieee80211_vif *vif;
-
-	vif = sc->csa_vif;
 	if (!vif || !vif->csa_active)
 		return false;
 
@@ -304,11 +301,23 @@ bool ath9k_csa_is_finished(struct ath_softc *sc)
 		return false;
 
 	ieee80211_csa_finish(vif);
-
-	sc->csa_vif = NULL;
 	return true;
 }
 
+static void ath9k_csa_update_vif(void *data, u8 *mac, struct ieee80211_vif *vif)
+{
+	struct ath_softc *sc = data;
+	ath9k_csa_is_finished(sc, vif);
+}
+
+void ath9k_csa_update(struct ath_softc *sc)
+{
+	ieee80211_iterate_active_interfaces(sc->hw,
+					    IEEE80211_IFACE_ITER_NORMAL,
+					    ath9k_csa_update_vif,
+					    sc);
+}
+
 void ath9k_beacon_tasklet(unsigned long data)
 {
 	struct ath_softc *sc = (struct ath_softc *)data;
@@ -362,13 +371,13 @@ void ath9k_beacon_tasklet(unsigned long data)
 		return;
 	}
 
-	/* EDMA devices check that in the tx completion function. */
-	if (!edma && ath9k_csa_is_finished(sc))
-		return;
-
 	slot = ath9k_beacon_choose_slot(sc);
 	vif = sc->beacon.bslot[slot];
 
+	/* EDMA devices check that in the tx completion function. */
+	if (!edma && ath9k_csa_is_finished(sc, vif))
+		return;
+
 	if (!vif || !vif->bss_conf.enable_beacon)
 		return;
 
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 5924f72dd493..317fcb99cfba 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1178,9 +1178,6 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw,
 	if (ath9k_uses_beacons(vif->type))
 		ath9k_beacon_remove_slot(sc, vif);
 
-	if (sc->csa_vif == vif)
-		sc->csa_vif = NULL;
-
 	ath9k_ps_wakeup(sc);
 	ath9k_calculate_summary_state(hw, NULL);
 	ath9k_ps_restore(sc);
@@ -2086,13 +2083,8 @@ static void ath9k_channel_switch_beacon(struct ieee80211_hw *hw,
 					struct ieee80211_vif *vif,
 					struct cfg80211_chan_def *chandef)
 {
-	struct ath_softc *sc = hw->priv;
-
-	/* mac80211 does not support CSA in multi-if cases (yet) */
-	if (WARN_ON(sc->csa_vif))
-		return;
-
-	sc->csa_vif = vif;
+	/* depend on vif->csa_active only */
+	return;
 }
 
 struct ieee80211_ops ath9k_ops = {
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 0a75e2f68c9d..a6507046dfe8 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -2566,7 +2566,7 @@ void ath_tx_edma_tasklet(struct ath_softc *sc)
 			sc->beacon.tx_processed = true;
 			sc->beacon.tx_last = !(ts.ts_status & ATH9K_TXERR_MASK);
 
-			ath9k_csa_is_finished(sc);
+			ath9k_csa_update(sc);
 			continue;
 		}
 
-- 
cgit v1.2.2


From bafc20a6499b931ab53afa75d535f338f86d525b Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Tue, 21 Jan 2014 09:16:43 +0530
Subject: ath9k: Remove unnecessary check

The commit "ath9k: Fix IQ calibration" added a check
to ensure that valid i2_p_q2_a0_d1 values are not discarded.
But since it is masked with 0xfff earlier, the codepath
will not be executed.

The earlier case where all values above 0x800 were considered
invalid is incorrect, since the HW can return valid values
between 0x800 and 0xfff.

Cc: Kai Shi <kaishi@qca.qualcomm.com>
Reported-by: Alex Hacker <hacker@epn.ru>
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ar9003_calib.c | 3 ---
 1 file changed, 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
index a352128c40ad..1537f426957e 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -655,9 +655,6 @@ static bool ar9003_hw_calc_iq_corr(struct ath_hw *ah,
 	if (i2_m_q2_a0_d1 > 0x800)
 		i2_m_q2_a0_d1 = -((0xfff - i2_m_q2_a0_d1) + 1);
 
-	if (i2_p_q2_a0_d1 > 0x1000)
-		i2_p_q2_a0_d1 = -((0x1fff - i2_p_q2_a0_d1) + 1);
-
 	if (iq_corr_a0_d1 > 0x800)
 		iq_corr_a0_d1 = -((0xfff - iq_corr_a0_d1) + 1);
 
-- 
cgit v1.2.2


From 6f7343d4c4682b52943993decc8678084a35514d Mon Sep 17 00:00:00 2001
From: andrea merello <andrea.merello@gmail.com>
Date: Tue, 21 Jan 2014 20:16:43 +0100
Subject: rtl818x: change misleading names for few register bit definitions

In rtl8180/rtl8187 drivers, few register bit definitions have
names of form FOOBAR_SHIFT, suggesting they should be used as
shift offset, for example
reg |= (1 << ENABLE_FOO_SHIFT).

However they are actually defined as (1 << x) and thus they are
used (correctly) like
reg |= ENABLE_FOO_SHIFT;

This patch kills the misleading _SHIFT suffix.

Signed-off-by: andrea merello <andrea.merello@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl8180/dev.c |  8 ++++----
 drivers/net/wireless/rtl818x/rtl8187/dev.c | 14 +++++++-------
 drivers/net/wireless/rtl818x/rtl818x.h     | 10 +++++-----
 3 files changed, 16 insertions(+), 16 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c
index 8ec17aad0e52..9bc843e9f4b4 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c
@@ -602,13 +602,13 @@ static int rtl8180_start(struct ieee80211_hw *dev)
 
 	if (priv->r8185) {
 		reg = rtl818x_ioread8(priv, &priv->map->CW_CONF);
-		reg &= ~RTL818X_CW_CONF_PERPACKET_CW_SHIFT;
-		reg |= RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT;
+		reg &= ~RTL818X_CW_CONF_PERPACKET_CW;
+		reg |= RTL818X_CW_CONF_PERPACKET_RETRY;
 		rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg);
 
 		reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL);
-		reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT;
-		reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT;
+		reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN;
+		reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL;
 		reg |=  RTL818X_TX_AGC_CTL_FEEDBACK_ANT;
 		rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg);
 
diff --git a/drivers/net/wireless/rtl818x/rtl8187/dev.c b/drivers/net/wireless/rtl818x/rtl8187/dev.c
index fd78df813a85..c981bcfb6cef 100644
--- a/drivers/net/wireless/rtl818x/rtl8187/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8187/dev.c
@@ -785,7 +785,7 @@ static int rtl8187b_init_hw(struct ieee80211_hw *dev)
 	rtl818x_iowrite16(priv, (__le16 *)0xFF34, 0x0FFF);
 
 	reg = rtl818x_ioread8(priv, &priv->map->CW_CONF);
-	reg |= RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT;
+	reg |= RTL818X_CW_CONF_PERPACKET_RETRY;
 	rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg);
 
 	/* Auto Rate Fallback Register (ARFR): 1M-54M setting */
@@ -943,8 +943,8 @@ static int rtl8187_start(struct ieee80211_hw *dev)
 		rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg);
 
 		reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL);
-		reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT;
-		reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT;
+		reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN;
+		reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL;
 		reg &= ~RTL818X_TX_AGC_CTL_FEEDBACK_ANT;
 		rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg);
 
@@ -986,13 +986,13 @@ static int rtl8187_start(struct ieee80211_hw *dev)
 	rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg);
 
 	reg = rtl818x_ioread8(priv, &priv->map->CW_CONF);
-	reg &= ~RTL818X_CW_CONF_PERPACKET_CW_SHIFT;
-	reg |= RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT;
+	reg &= ~RTL818X_CW_CONF_PERPACKET_CW;
+	reg |= RTL818X_CW_CONF_PERPACKET_RETRY;
 	rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg);
 
 	reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL);
-	reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT;
-	reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT;
+	reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN;
+	reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL;
 	reg &= ~RTL818X_TX_AGC_CTL_FEEDBACK_ANT;
 	rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg);
 
diff --git a/drivers/net/wireless/rtl818x/rtl818x.h b/drivers/net/wireless/rtl818x/rtl818x.h
index ce23dfd42381..fa7f7f61ea26 100644
--- a/drivers/net/wireless/rtl818x/rtl818x.h
+++ b/drivers/net/wireless/rtl818x/rtl818x.h
@@ -144,9 +144,9 @@ struct rtl818x_csr {
 	__le32	HSSI_PARA;
 	u8	reserved_13[4];
 	u8	TX_AGC_CTL;
-#define RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT		(1 << 0)
-#define RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT	(1 << 1)
-#define RTL818X_TX_AGC_CTL_FEEDBACK_ANT			(1 << 2)
+#define RTL818X_TX_AGC_CTL_PERPACKET_GAIN	(1 << 0)
+#define RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL	(1 << 1)
+#define RTL818X_TX_AGC_CTL_FEEDBACK_ANT		(1 << 2)
 	u8	TX_GAIN_CCK;
 	u8	TX_GAIN_OFDM;
 	u8	TX_ANTENNA;
@@ -158,8 +158,8 @@ struct rtl818x_csr {
 	u8	SLOT;
 	u8	reserved_16[5];
 	u8	CW_CONF;
-#define RTL818X_CW_CONF_PERPACKET_CW_SHIFT	(1 << 0)
-#define RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT	(1 << 1)
+#define RTL818X_CW_CONF_PERPACKET_CW	(1 << 0)
+#define RTL818X_CW_CONF_PERPACKET_RETRY	(1 << 1)
 	u8	CW_VAL;
 	u8	RATE_FALLBACK;
 #define RTL818X_RATE_FALLBACK_ENABLE	(1 << 7)
-- 
cgit v1.2.2


From f783807308d1178683e583ccf268816bb05f41b2 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: Sun, 26 Jan 2014 11:53:21 +0100
Subject: ath9k: Fix uninitialized variable in ath9k_has_tx_pending()
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

drivers/net/wireless/ath/ath9k/main.c: In function ‘ath9k_has_tx_pending’:
drivers/net/wireless/ath/ath9k/main.c:1869: warning: ‘npend’ may be used uninitialized in this function

Introduced by commit 10e2318103f5941aa70c318afe34bc41f1b98529 ("ath9k:
optimize ath9k_flush").

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 317fcb99cfba..4486e3763919 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1863,7 +1863,7 @@ static void ath9k_set_coverage_class(struct ieee80211_hw *hw, u8 coverage_class)
 
 static bool ath9k_has_tx_pending(struct ath_softc *sc)
 {
-	int i, npend;
+	int i, npend = 0;
 
 	for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) {
 		if (!ATH_TXQ_SETUP(sc, i))
-- 
cgit v1.2.2


From 9ee66d1bb631eb13a967b4888e412ea4d6dc55e5 Mon Sep 17 00:00:00 2001
From: Hante Meuleman <meuleman@broadcom.com>
Date: Wed, 29 Jan 2014 15:32:11 +0100
Subject: brcmfmac: expand sta info to report dtim and beacon period.

Expand the get_station command to also report dtim period and
beacon interval when the device is connected.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 .../net/wireless/brcm80211/brcmfmac/wl_cfg80211.c  | 26 ++++++++++++++++++++++
 1 file changed, 26 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
index 1a80bf19cb89..616b37824d33 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
@@ -2163,6 +2163,8 @@ brcmf_cfg80211_get_station(struct wiphy *wiphy, struct net_device *ndev,
 	s32 err = 0;
 	u8 *bssid = profile->bssid;
 	struct brcmf_sta_info_le sta_info_le;
+	u32 beacon_period;
+	u32 dtim_period;
 
 	brcmf_dbg(TRACE, "Enter, MAC %pM\n", mac);
 	if (!check_vif_up(ifp->vif))
@@ -2217,6 +2219,30 @@ brcmf_cfg80211_get_station(struct wiphy *wiphy, struct net_device *ndev,
 				sinfo->signal = rssi;
 				brcmf_dbg(CONN, "RSSI %d dBm\n", rssi);
 			}
+			err = brcmf_fil_cmd_int_get(ifp, BRCMF_C_GET_BCNPRD,
+						    &beacon_period);
+			if (err) {
+				brcmf_err("Could not get beacon period (%d)\n",
+					  err);
+				goto done;
+			} else {
+				sinfo->bss_param.beacon_interval =
+					beacon_period;
+				brcmf_dbg(CONN, "Beacon peroid %d\n",
+					  beacon_period);
+			}
+			err = brcmf_fil_cmd_int_get(ifp, BRCMF_C_GET_DTIMPRD,
+						    &dtim_period);
+			if (err) {
+				brcmf_err("Could not get DTIM period (%d)\n",
+					  err);
+				goto done;
+			} else {
+				sinfo->bss_param.dtim_period = dtim_period;
+				brcmf_dbg(CONN, "DTIM peroid %d\n",
+					  dtim_period);
+			}
+			sinfo->filled |= STATION_INFO_BSS_PARAM;
 		}
 	} else
 		err = -EPERM;
-- 
cgit v1.2.2


From 0b0acd8ce0d9fcf94ac0d2609ca25a6d99e3864b Mon Sep 17 00:00:00 2001
From: Franky Lin <frankyl@broadcom.com>
Date: Wed, 29 Jan 2014 15:32:12 +0100
Subject: brcmfmac: add owner info to sdio_driver structure

To link module attribute with sdio device driver attribute in sysfs.

Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
index fa35b23bbaa7..9eb6f786b3b4 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
@@ -1115,11 +1115,12 @@ static struct sdio_driver brcmf_sdmmc_driver = {
 	.remove = brcmf_ops_sdio_remove,
 	.name = BRCMFMAC_SDIO_PDATA_NAME,
 	.id_table = brcmf_sdmmc_ids,
-#ifdef CONFIG_PM_SLEEP
 	.drv = {
+		.owner = THIS_MODULE,
+#ifdef CONFIG_PM_SLEEP
 		.pm = &brcmf_sdio_pm_ops,
-	},
 #endif	/* CONFIG_PM_SLEEP */
+	},
 };
 
 static int brcmf_sdio_pd_probe(struct platform_device *pdev)
-- 
cgit v1.2.2


From 0801e6c5d8224a27abb7afc920676782efdd5922 Mon Sep 17 00:00:00 2001
From: Daniel Kim <dekim@broadcom.com>
Date: Wed, 29 Jan 2014 15:32:13 +0100
Subject: brcmfmac: enable firmware console logging functionality

Address of rte console was not initialized and so console logging
functionality didn't kick in. This patch fixes it and makes console
polling interval a debugfs variable.

Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Daniel Kim <dekim@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 154 ++++++++++++---------
 1 file changed, 88 insertions(+), 66 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index 3e991897d7ca..98d07846d6e5 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -953,6 +953,86 @@ end:
 
 }
 
+#ifdef DEBUG
+static inline bool brcmf_sdio_valid_shared_address(u32 addr)
+{
+	return !(addr == 0 || ((~addr >> 16) & 0xffff) == (addr & 0xffff));
+}
+
+static int brcmf_sdio_readshared(struct brcmf_sdio *bus,
+				 struct sdpcm_shared *sh)
+{
+	u32 addr;
+	int rv;
+	u32 shaddr = 0;
+	struct sdpcm_shared_le sh_le;
+	__le32 addr_le;
+
+	shaddr = bus->ci->rambase + bus->ramsize - 4;
+
+	/*
+	 * Read last word in socram to determine
+	 * address of sdpcm_shared structure
+	 */
+	sdio_claim_host(bus->sdiodev->func[1]);
+	brcmf_sdio_bus_sleep(bus, false, false);
+	rv = brcmf_sdiod_ramrw(bus->sdiodev, false, shaddr, (u8 *)&addr_le, 4);
+	sdio_release_host(bus->sdiodev->func[1]);
+	if (rv < 0)
+		return rv;
+
+	addr = le32_to_cpu(addr_le);
+
+	brcmf_dbg(SDIO, "sdpcm_shared address 0x%08X\n", addr);
+
+	/*
+	 * Check if addr is valid.
+	 * NVRAM length at the end of memory should have been overwritten.
+	 */
+	if (!brcmf_sdio_valid_shared_address(addr)) {
+			brcmf_err("invalid sdpcm_shared address 0x%08X\n",
+				  addr);
+			return -EINVAL;
+	}
+
+	/* Read hndrte_shared structure */
+	rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr, (u8 *)&sh_le,
+			       sizeof(struct sdpcm_shared_le));
+	if (rv < 0)
+		return rv;
+
+	/* Endianness */
+	sh->flags = le32_to_cpu(sh_le.flags);
+	sh->trap_addr = le32_to_cpu(sh_le.trap_addr);
+	sh->assert_exp_addr = le32_to_cpu(sh_le.assert_exp_addr);
+	sh->assert_file_addr = le32_to_cpu(sh_le.assert_file_addr);
+	sh->assert_line = le32_to_cpu(sh_le.assert_line);
+	sh->console_addr = le32_to_cpu(sh_le.console_addr);
+	sh->msgtrace_addr = le32_to_cpu(sh_le.msgtrace_addr);
+
+	if ((sh->flags & SDPCM_SHARED_VERSION_MASK) > SDPCM_SHARED_VERSION) {
+		brcmf_err("sdpcm shared version unsupported: dhd %d dongle %d\n",
+			  SDPCM_SHARED_VERSION,
+			  sh->flags & SDPCM_SHARED_VERSION_MASK);
+		return -EPROTO;
+	}
+
+	return 0;
+}
+
+static void brcmf_sdio_get_console_addr(struct brcmf_sdio *bus)
+{
+	struct sdpcm_shared sh;
+
+	if (brcmf_sdio_readshared(bus, &sh) == 0)
+		bus->console_addr = sh.console_addr;
+}
+#else
+static void brcmf_sdio_get_console_addr(struct brcmf_sdio *bus)
+{
+}
+#endif /* DEBUG */
+
 static u32 brcmf_sdio_hostmail(struct brcmf_sdio *bus)
 {
 	u32 intstatus = 0;
@@ -996,6 +1076,12 @@ static u32 brcmf_sdio_hostmail(struct brcmf_sdio *bus)
 		else
 			brcmf_dbg(SDIO, "Dongle ready, protocol version %d\n",
 				  bus->sdpcm_ver);
+
+		/*
+		 * Retrieve console state address now that firmware should have
+		 * updated it.
+		 */
+		brcmf_sdio_get_console_addr(bus);
 	}
 
 	/*
@@ -2810,72 +2896,6 @@ brcmf_sdio_bus_txctl(struct device *dev, unsigned char *msg, uint msglen)
 }
 
 #ifdef DEBUG
-static inline bool brcmf_sdio_valid_shared_address(u32 addr)
-{
-	return !(addr == 0 || ((~addr >> 16) & 0xffff) == (addr & 0xffff));
-}
-
-static int brcmf_sdio_readshared(struct brcmf_sdio *bus,
-				 struct sdpcm_shared *sh)
-{
-	u32 addr;
-	int rv;
-	u32 shaddr = 0;
-	struct sdpcm_shared_le sh_le;
-	__le32 addr_le;
-
-	shaddr = bus->ci->rambase + bus->ramsize - 4;
-
-	/*
-	 * Read last word in socram to determine
-	 * address of sdpcm_shared structure
-	 */
-	sdio_claim_host(bus->sdiodev->func[1]);
-	brcmf_sdio_bus_sleep(bus, false, false);
-	rv = brcmf_sdiod_ramrw(bus->sdiodev, false, shaddr, (u8 *)&addr_le, 4);
-	sdio_release_host(bus->sdiodev->func[1]);
-	if (rv < 0)
-		return rv;
-
-	addr = le32_to_cpu(addr_le);
-
-	brcmf_dbg(SDIO, "sdpcm_shared address 0x%08X\n", addr);
-
-	/*
-	 * Check if addr is valid.
-	 * NVRAM length at the end of memory should have been overwritten.
-	 */
-	if (!brcmf_sdio_valid_shared_address(addr)) {
-			brcmf_err("invalid sdpcm_shared address 0x%08X\n",
-				  addr);
-			return -EINVAL;
-	}
-
-	/* Read hndrte_shared structure */
-	rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr, (u8 *)&sh_le,
-			       sizeof(struct sdpcm_shared_le));
-	if (rv < 0)
-		return rv;
-
-	/* Endianness */
-	sh->flags = le32_to_cpu(sh_le.flags);
-	sh->trap_addr = le32_to_cpu(sh_le.trap_addr);
-	sh->assert_exp_addr = le32_to_cpu(sh_le.assert_exp_addr);
-	sh->assert_file_addr = le32_to_cpu(sh_le.assert_file_addr);
-	sh->assert_line = le32_to_cpu(sh_le.assert_line);
-	sh->console_addr = le32_to_cpu(sh_le.console_addr);
-	sh->msgtrace_addr = le32_to_cpu(sh_le.msgtrace_addr);
-
-	if ((sh->flags & SDPCM_SHARED_VERSION_MASK) > SDPCM_SHARED_VERSION) {
-		brcmf_err("sdpcm shared version unsupported: dhd %d dongle %d\n",
-			  SDPCM_SHARED_VERSION,
-			  sh->flags & SDPCM_SHARED_VERSION_MASK);
-		return -EPROTO;
-	}
-
-	return 0;
-}
-
 static int brcmf_sdio_dump_console(struct brcmf_sdio *bus,
 				   struct sdpcm_shared *sh, char __user *data,
 				   size_t count)
@@ -3105,6 +3125,8 @@ static void brcmf_sdio_debugfs_create(struct brcmf_sdio *bus)
 	debugfs_create_file("forensics", S_IRUGO, dentry, bus,
 			    &brcmf_sdio_forensic_ops);
 	brcmf_debugfs_create_sdio_count(drvr, &bus->sdcnt);
+	debugfs_create_u32("console_interval", 0644, dentry,
+			   &bus->console_interval);
 }
 #else
 static int brcmf_sdio_checkdied(struct brcmf_sdio *bus)
-- 
cgit v1.2.2


From 65d80d0b80960f9bc35d1067a1a297efc60cc014 Mon Sep 17 00:00:00 2001
From: Arend van Spriel <arend@broadcom.com>
Date: Wed, 29 Jan 2014 15:32:14 +0100
Subject: brcmfmac: move SDIO specific functions

The chip related functions will be made agnostic of the host
interface. However, some functions in the source file are
rather SDIO specific so better move it to the SDIO specific
source file.

Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 173 ++++++++++++++++++++-
 .../net/wireless/brcm80211/brcmfmac/sdio_chip.c    | 172 +-------------------
 .../net/wireless/brcm80211/brcmfmac/sdio_chip.h    |   3 -
 .../net/wireless/brcm80211/brcmfmac/sdio_host.h    |   1 +
 4 files changed, 174 insertions(+), 175 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index 98d07846d6e5..090ce1875f15 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -494,6 +494,52 @@ enum brcmf_sdio_frmtype {
 	BRCMF_SDIO_FT_SUB,
 };
 
+#define SDIOD_DRVSTR_KEY(chip, pmu)     (((chip) << 16) | (pmu))
+
+/* SDIO Pad drive strength to select value mappings */
+struct sdiod_drive_str {
+	u8 strength;	/* Pad Drive Strength in mA */
+	u8 sel;		/* Chip-specific select value */
+};
+
+/* SDIO Drive Strength to sel value table for PMU Rev 11 (1.8V) */
+static const struct sdiod_drive_str sdiod_drvstr_tab1_1v8[] = {
+	{32, 0x6},
+	{26, 0x7},
+	{22, 0x4},
+	{16, 0x5},
+	{12, 0x2},
+	{8, 0x3},
+	{4, 0x0},
+	{0, 0x1}
+};
+
+/* SDIO Drive Strength to sel value table for PMU Rev 13 (1.8v) */
+static const struct sdiod_drive_str sdiod_drive_strength_tab5_1v8[] = {
+	{6, 0x7},
+	{5, 0x6},
+	{4, 0x5},
+	{3, 0x4},
+	{2, 0x2},
+	{1, 0x1},
+	{0, 0x0}
+};
+
+/* SDIO Drive Strength to sel value table for PMU Rev 17 (1.8v) */
+static const struct sdiod_drive_str sdiod_drvstr_tab6_1v8[] = {
+	{3, 0x3},
+	{2, 0x2},
+	{1, 0x1},
+	{0, 0x0} };
+
+/* SDIO Drive Strength to sel value table for 43143 PMU Rev 17 (3.3V) */
+static const struct sdiod_drive_str sdiod_drvstr_tab2_3v3[] = {
+	{16, 0x7},
+	{12, 0x5},
+	{8,  0x3},
+	{4,  0x1}
+};
+
 #define BCM43143_FIRMWARE_NAME		"brcm/brcmfmac43143-sdio.bin"
 #define BCM43143_NVRAM_NAME		"brcm/brcmfmac43143-sdio.txt"
 #define BCM43241B0_FIRMWARE_NAME	"brcm/brcmfmac43241b0-sdio.bin"
@@ -3744,6 +3790,131 @@ static void brcmf_sdio_dataworker(struct work_struct *work)
 	}
 }
 
+static char *brcmf_sdio_chip_name(uint chipid, char *buf, uint len)
+{
+	const char *fmt;
+
+	fmt = ((chipid > 0xa000) || (chipid < 0x4000)) ? "%d" : "%x";
+	snprintf(buf, len, fmt, chipid);
+	return buf;
+}
+
+static void
+brcmf_sdio_drivestrengthinit(struct brcmf_sdio_dev *sdiodev,
+				  struct brcmf_chip *ci, u32 drivestrength)
+{
+	const struct sdiod_drive_str *str_tab = NULL;
+	u32 str_mask;
+	u32 str_shift;
+	char chn[8];
+	u32 base = ci->c_inf[0].base;
+	u32 i;
+	u32 drivestrength_sel = 0;
+	u32 cc_data_temp;
+	u32 addr;
+
+	if (!(ci->c_inf[0].caps & CC_CAP_PMU))
+		return;
+
+	switch (SDIOD_DRVSTR_KEY(ci->chip, ci->pmurev)) {
+	case SDIOD_DRVSTR_KEY(BCM4330_CHIP_ID, 12):
+		str_tab = sdiod_drvstr_tab1_1v8;
+		str_mask = 0x00003800;
+		str_shift = 11;
+		break;
+	case SDIOD_DRVSTR_KEY(BCM4334_CHIP_ID, 17):
+		str_tab = sdiod_drvstr_tab6_1v8;
+		str_mask = 0x00001800;
+		str_shift = 11;
+		break;
+	case SDIOD_DRVSTR_KEY(BCM43143_CHIP_ID, 17):
+		/* note: 43143 does not support tristate */
+		i = ARRAY_SIZE(sdiod_drvstr_tab2_3v3) - 1;
+		if (drivestrength >= sdiod_drvstr_tab2_3v3[i].strength) {
+			str_tab = sdiod_drvstr_tab2_3v3;
+			str_mask = 0x00000007;
+			str_shift = 0;
+		} else
+			brcmf_err("Invalid SDIO Drive strength for chip %s, strength=%d\n",
+				  brcmf_sdio_chip_name(ci->chip, chn, 8),
+				  drivestrength);
+		break;
+	case SDIOD_DRVSTR_KEY(BCM43362_CHIP_ID, 13):
+		str_tab = sdiod_drive_strength_tab5_1v8;
+		str_mask = 0x00003800;
+		str_shift = 11;
+		break;
+	default:
+		brcmf_err("No SDIO Drive strength init done for chip %s rev %d pmurev %d\n",
+			  brcmf_sdio_chip_name(ci->chip, chn, 8),
+			  ci->chiprev, ci->pmurev);
+		break;
+	}
+
+	if (str_tab != NULL) {
+		for (i = 0; str_tab[i].strength != 0; i++) {
+			if (drivestrength >= str_tab[i].strength) {
+				drivestrength_sel = str_tab[i].sel;
+				break;
+			}
+		}
+		addr = CORE_CC_REG(base, chipcontrol_addr);
+		brcmf_sdiod_regwl(sdiodev, addr, 1, NULL);
+		cc_data_temp = brcmf_sdiod_regrl(sdiodev, addr, NULL);
+		cc_data_temp &= ~str_mask;
+		drivestrength_sel <<= str_shift;
+		cc_data_temp |= drivestrength_sel;
+		brcmf_sdiod_regwl(sdiodev, addr, cc_data_temp, NULL);
+
+		brcmf_dbg(INFO, "SDIO: %d mA (req=%d mA) drive strength selected, set to 0x%08x\n",
+			  str_tab[i].strength, drivestrength, cc_data_temp);
+	}
+}
+
+int brcmf_sdio_buscoreprep(struct brcmf_sdio_dev *sdiodev)
+{
+	int err = 0;
+	u8 clkval, clkset;
+
+	/* Try forcing SDIO core to do ALPAvail request only */
+	clkset = SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_ALP_AVAIL_REQ;
+	brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err);
+	if (err) {
+		brcmf_err("error writing for HT off\n");
+		return err;
+	}
+
+	/* If register supported, wait for ALPAvail and then force ALP */
+	/* This may take up to 15 milliseconds */
+	clkval = brcmf_sdiod_regrb(sdiodev,
+				   SBSDIO_FUNC1_CHIPCLKCSR, NULL);
+
+	if ((clkval & ~SBSDIO_AVBITS) != clkset) {
+		brcmf_err("ChipClkCSR access: wrote 0x%02x read 0x%02x\n",
+			  clkset, clkval);
+		return -EACCES;
+	}
+
+	SPINWAIT(((clkval = brcmf_sdiod_regrb(sdiodev,
+					      SBSDIO_FUNC1_CHIPCLKCSR, NULL)),
+			!SBSDIO_ALPAV(clkval)),
+			PMU_MAX_TRANSITION_DLY);
+	if (!SBSDIO_ALPAV(clkval)) {
+		brcmf_err("timeout on ALPAV wait, clkval 0x%02x\n",
+			  clkval);
+		return -EBUSY;
+	}
+
+	clkset = SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_FORCE_ALP;
+	brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err);
+	udelay(65);
+
+	/* Also, disable the extra SDIO pull-ups */
+	brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_SDIOPULLUP, 0, NULL);
+
+	return 0;
+}
+
 static bool
 brcmf_sdio_probe_attach(struct brcmf_sdio *bus)
 {
@@ -3794,7 +3965,7 @@ brcmf_sdio_probe_attach(struct brcmf_sdio *bus)
 		drivestrength = bus->sdiodev->pdata->drive_strength;
 	else
 		drivestrength = DEFAULT_SDIO_DRIVE_STRENGTH;
-	brcmf_sdio_chip_drivestrengthinit(bus->sdiodev, bus->ci, drivestrength);
+	brcmf_sdio_drivestrengthinit(bus->sdiodev, bus->ci, drivestrength);
 
 	/* Get info on the SOCRAM cores... */
 	bus->ramsize = bus->ci->ramsize;
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c
index 82bf3c5d3cdc..1ce8cb7e25ce 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c
@@ -73,50 +73,6 @@
 #define D11_BCMA_IOCTL_PHYCLOCKEN	0x0004
 #define D11_BCMA_IOCTL_PHYRESET		0x0008
 
-#define SDIOD_DRVSTR_KEY(chip, pmu)     (((chip) << 16) | (pmu))
-/* SDIO Pad drive strength to select value mappings */
-struct sdiod_drive_str {
-	u8 strength;	/* Pad Drive Strength in mA */
-	u8 sel;		/* Chip-specific select value */
-};
-/* SDIO Drive Strength to sel value table for PMU Rev 11 (1.8V) */
-static const struct sdiod_drive_str sdiod_drvstr_tab1_1v8[] = {
-	{32, 0x6},
-	{26, 0x7},
-	{22, 0x4},
-	{16, 0x5},
-	{12, 0x2},
-	{8, 0x3},
-	{4, 0x0},
-	{0, 0x1}
-};
-
-/* SDIO Drive Strength to sel value table for PMU Rev 13 (1.8v) */
-static const struct sdiod_drive_str sdiod_drive_strength_tab5_1v8[] = {
-        {6, 0x7},
-        {5, 0x6},
-        {4, 0x5},
-        {3, 0x4},
-        {2, 0x2},
-        {1, 0x1},
-        {0, 0x0}
-};
-
-/* SDIO Drive Strength to sel value table for PMU Rev 17 (1.8v) */
-static const struct sdiod_drive_str sdiod_drvstr_tab6_1v8[] = {
-	{3, 0x3},
-	{2, 0x2},
-	{1, 0x1},
-	{0, 0x0} };
-
-/* SDIO Drive Strength to sel value table for 43143 PMU Rev 17 (3.3V) */
-static const struct sdiod_drive_str sdiod_drvstr_tab2_3v3[] = {
-	{16, 0x7},
-	{12, 0x5},
-	{8,  0x3},
-	{4,  0x1}
-};
-
 u8
 brcmf_sdio_chip_getinfidx(struct brcmf_chip *ci, u16 coreid)
 {
@@ -661,51 +617,6 @@ static int brcmf_sdio_chip_recognition(struct brcmf_sdio_dev *sdiodev,
 	return brcmf_sdio_chip_cichk(ci);
 }
 
-static int
-brcmf_sdio_chip_buscoreprep(struct brcmf_sdio_dev *sdiodev)
-{
-	int err = 0;
-	u8 clkval, clkset;
-
-	/* Try forcing SDIO core to do ALPAvail request only */
-	clkset = SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_ALP_AVAIL_REQ;
-	brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err);
-	if (err) {
-		brcmf_err("error writing for HT off\n");
-		return err;
-	}
-
-	/* If register supported, wait for ALPAvail and then force ALP */
-	/* This may take up to 15 milliseconds */
-	clkval = brcmf_sdiod_regrb(sdiodev,
-				   SBSDIO_FUNC1_CHIPCLKCSR, NULL);
-
-	if ((clkval & ~SBSDIO_AVBITS) != clkset) {
-		brcmf_err("ChipClkCSR access: wrote 0x%02x read 0x%02x\n",
-			  clkset, clkval);
-		return -EACCES;
-	}
-
-	SPINWAIT(((clkval = brcmf_sdiod_regrb(sdiodev,
-					      SBSDIO_FUNC1_CHIPCLKCSR, NULL)),
-			!SBSDIO_ALPAV(clkval)),
-			PMU_MAX_TRANSITION_DLY);
-	if (!SBSDIO_ALPAV(clkval)) {
-		brcmf_err("timeout on ALPAV wait, clkval 0x%02x\n",
-			  clkval);
-		return -EBUSY;
-	}
-
-	clkset = SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_FORCE_ALP;
-	brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err);
-	udelay(65);
-
-	/* Also, disable the extra SDIO pull-ups */
-	brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_SDIOPULLUP, 0, NULL);
-
-	return 0;
-}
-
 static void
 brcmf_sdio_chip_buscoresetup(struct brcmf_sdio_dev *sdiodev,
 			     struct brcmf_chip *ci)
@@ -754,7 +665,7 @@ int brcmf_sdio_chip_attach(struct brcmf_sdio_dev *sdiodev,
 	if (!ci)
 		return -ENOMEM;
 
-	ret = brcmf_sdio_chip_buscoreprep(sdiodev);
+	ret = brcmf_sdio_buscoreprep(sdiodev);
 	if (ret != 0)
 		goto err;
 
@@ -786,87 +697,6 @@ brcmf_sdio_chip_detach(struct brcmf_chip **ci_ptr)
 	*ci_ptr = NULL;
 }
 
-static char *brcmf_sdio_chip_name(uint chipid, char *buf, uint len)
-{
-	const char *fmt;
-
-	fmt = ((chipid > 0xa000) || (chipid < 0x4000)) ? "%d" : "%x";
-	snprintf(buf, len, fmt, chipid);
-	return buf;
-}
-
-void
-brcmf_sdio_chip_drivestrengthinit(struct brcmf_sdio_dev *sdiodev,
-				  struct brcmf_chip *ci, u32 drivestrength)
-{
-	const struct sdiod_drive_str *str_tab = NULL;
-	u32 str_mask;
-	u32 str_shift;
-	char chn[8];
-	u32 base = ci->c_inf[0].base;
-	u32 i;
-	u32 drivestrength_sel = 0;
-	u32 cc_data_temp;
-	u32 addr;
-
-	if (!(ci->c_inf[0].caps & CC_CAP_PMU))
-		return;
-
-	switch (SDIOD_DRVSTR_KEY(ci->chip, ci->pmurev)) {
-	case SDIOD_DRVSTR_KEY(BCM4330_CHIP_ID, 12):
-		str_tab = sdiod_drvstr_tab1_1v8;
-		str_mask = 0x00003800;
-		str_shift = 11;
-		break;
-	case SDIOD_DRVSTR_KEY(BCM4334_CHIP_ID, 17):
-		str_tab = sdiod_drvstr_tab6_1v8;
-		str_mask = 0x00001800;
-		str_shift = 11;
-		break;
-	case SDIOD_DRVSTR_KEY(BCM43143_CHIP_ID, 17):
-		/* note: 43143 does not support tristate */
-		i = ARRAY_SIZE(sdiod_drvstr_tab2_3v3) - 1;
-		if (drivestrength >= sdiod_drvstr_tab2_3v3[i].strength) {
-			str_tab = sdiod_drvstr_tab2_3v3;
-			str_mask = 0x00000007;
-			str_shift = 0;
-		} else
-			brcmf_err("Invalid SDIO Drive strength for chip %s, strength=%d\n",
-				  brcmf_sdio_chip_name(ci->chip, chn, 8),
-				  drivestrength);
-		break;
-	case SDIOD_DRVSTR_KEY(BCM43362_CHIP_ID, 13):
-		str_tab = sdiod_drive_strength_tab5_1v8;
-		str_mask = 0x00003800;
-		str_shift = 11;
-		break;
-	default:
-		brcmf_err("No SDIO Drive strength init done for chip %s rev %d pmurev %d\n",
-			  brcmf_sdio_chip_name(ci->chip, chn, 8),
-			  ci->chiprev, ci->pmurev);
-		break;
-	}
-
-	if (str_tab != NULL) {
-		for (i = 0; str_tab[i].strength != 0; i++) {
-			if (drivestrength >= str_tab[i].strength) {
-				drivestrength_sel = str_tab[i].sel;
-				break;
-			}
-		}
-		addr = CORE_CC_REG(base, chipcontrol_addr);
-		brcmf_sdiod_regwl(sdiodev, addr, 1, NULL);
-		cc_data_temp = brcmf_sdiod_regrl(sdiodev, addr, NULL);
-		cc_data_temp &= ~str_mask;
-		drivestrength_sel <<= str_shift;
-		cc_data_temp |= drivestrength_sel;
-		brcmf_sdiod_regwl(sdiodev, addr, cc_data_temp, NULL);
-
-		brcmf_dbg(INFO, "SDIO: %d mA (req=%d mA) drive strength selected, set to 0x%08x\n",
-			  str_tab[i].strength, drivestrength, cc_data_temp);
-	}
-}
-
 static void
 brcmf_sdio_chip_cm3_enterdl(struct brcmf_sdio_dev *sdiodev,
 			    struct brcmf_chip *ci)
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.h b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.h
index fb0614329ede..2bc00c5d1a7f 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.h
@@ -219,9 +219,6 @@ struct sdpcmd_regs {
 int brcmf_sdio_chip_attach(struct brcmf_sdio_dev *sdiodev,
 			   struct brcmf_chip **ci_ptr);
 void brcmf_sdio_chip_detach(struct brcmf_chip **ci_ptr);
-void brcmf_sdio_chip_drivestrengthinit(struct brcmf_sdio_dev *sdiodev,
-				       struct brcmf_chip *ci,
-				       u32 drivestrength);
 u8 brcmf_sdio_chip_getinfidx(struct brcmf_chip *ci, u16 coreid);
 void brcmf_sdio_chip_enter_download(struct brcmf_sdio_dev *sdiodev,
 				    struct brcmf_chip *ci);
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
index 092e9c824992..396c06cea8ef 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
@@ -239,5 +239,6 @@ void brcmf_sdio_remove(struct brcmf_sdio *bus);
 void brcmf_sdio_isr(struct brcmf_sdio *bus);
 
 void brcmf_sdio_wd_timer(struct brcmf_sdio *bus, uint wdtick);
+int brcmf_sdio_buscoreprep(struct brcmf_sdio_dev *sdiodev);
 
 #endif				/* _BRCM_SDH_H_ */
-- 
cgit v1.2.2


From 20c9c9bc144c8a7df04259fa98fd0597b2f85cc2 Mon Sep 17 00:00:00 2001
From: Arend van Spriel <arend@broadcom.com>
Date: Wed, 29 Jan 2014 15:32:15 +0100
Subject: brcmfmac: rename sdio_chip.[ch]

Just renaming the file. This file will contain chip related functions
that are independent of the host interface type.

Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/Makefile   |   4 +-
 drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c   |   1 -
 drivers/net/wireless/brcm80211/brcmfmac/chip.c     | 802 +++++++++++++++++++++
 drivers/net/wireless/brcm80211/brcmfmac/chip.h     | 228 ++++++
 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c |   2 +-
 .../net/wireless/brcm80211/brcmfmac/sdio_chip.c    | 802 ---------------------
 .../net/wireless/brcm80211/brcmfmac/sdio_chip.h    | 228 ------
 7 files changed, 1033 insertions(+), 1034 deletions(-)
 create mode 100644 drivers/net/wireless/brcm80211/brcmfmac/chip.c
 create mode 100644 drivers/net/wireless/brcm80211/brcmfmac/chip.h
 delete mode 100644 drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c
 delete mode 100644 drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.h

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/Makefile b/drivers/net/wireless/brcm80211/brcmfmac/Makefile
index 57cddee03252..1d2ceac3a221 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/Makefile
+++ b/drivers/net/wireless/brcm80211/brcmfmac/Makefile
@@ -24,6 +24,7 @@ ccflags-y += -D__CHECK_ENDIAN__
 obj-$(CONFIG_BRCMFMAC) += brcmfmac.o
 brcmfmac-objs += \
 		wl_cfg80211.o \
+		chip.o \
 		fwil.o \
 		fweh.o \
 		fwsignal.o \
@@ -36,8 +37,7 @@ brcmfmac-objs += \
 		btcoex.o
 brcmfmac-$(CONFIG_BRCMFMAC_SDIO) += \
 		dhd_sdio.o \
-		bcmsdh.o \
-		sdio_chip.o
+		bcmsdh.o
 brcmfmac-$(CONFIG_BRCMFMAC_USB) += \
 		usb.o
 brcmfmac-$(CONFIG_BRCMDBG) += \
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
index 9eb6f786b3b4..5711fd6f551a 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
@@ -43,7 +43,6 @@
 #include "dhd_bus.h"
 #include "dhd_dbg.h"
 #include "sdio_host.h"
-#include "sdio_chip.h"
 
 #define SDIOH_API_ACCESS_RETRY_LIMIT	2
 
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/chip.c b/drivers/net/wireless/brcm80211/brcmfmac/chip.c
new file mode 100644
index 000000000000..37fd44a3483a
--- /dev/null
+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.c
@@ -0,0 +1,802 @@
+/*
+ * Copyright (c) 2011 Broadcom Corporation
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+/* ***** SDIO interface chip backplane handle functions ***** */
+
+#include <linux/types.h>
+#include <linux/netdevice.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/sdio_func.h>
+#include <linux/mmc/sdio_ids.h>
+#include <linux/ssb/ssb_regs.h>
+#include <linux/bcma/bcma.h>
+
+#include <chipcommon.h>
+#include <brcm_hw_ids.h>
+#include <brcmu_wifi.h>
+#include <brcmu_utils.h>
+#include <soc.h>
+#include "dhd_dbg.h"
+#include "sdio_host.h"
+#include "chip.h"
+
+/* chip core base & ramsize */
+/* bcm4329 */
+/* SDIO device core, ID 0x829 */
+#define BCM4329_CORE_BUS_BASE		0x18011000
+/* internal memory core, ID 0x80e */
+#define BCM4329_CORE_SOCRAM_BASE	0x18003000
+/* ARM Cortex M3 core, ID 0x82a */
+#define BCM4329_CORE_ARM_BASE		0x18002000
+#define BCM4329_RAMSIZE			0x48000
+
+/* bcm43143 */
+/* SDIO device core */
+#define BCM43143_CORE_BUS_BASE		0x18002000
+/* internal memory core */
+#define BCM43143_CORE_SOCRAM_BASE	0x18004000
+/* ARM Cortex M3 core, ID 0x82a */
+#define BCM43143_CORE_ARM_BASE		0x18003000
+#define BCM43143_RAMSIZE		0x70000
+
+/* All D11 cores, ID 0x812 */
+#define BCM43xx_CORE_D11_BASE		0x18001000
+
+#define	SBCOREREV(sbidh) \
+	((((sbidh) & SSB_IDHIGH_RCHI) >> SSB_IDHIGH_RCHI_SHIFT) | \
+	  ((sbidh) & SSB_IDHIGH_RCLO))
+
+/* SOC Interconnect types (aka chip types) */
+#define SOCI_SB		0
+#define SOCI_AI		1
+
+/* EROM CompIdentB */
+#define CIB_REV_MASK		0xff000000
+#define CIB_REV_SHIFT		24
+
+/* ARM CR4 core specific control flag bits */
+#define ARMCR4_BCMA_IOCTL_CPUHALT	0x0020
+
+/* D11 core specific control flag bits */
+#define D11_BCMA_IOCTL_PHYCLOCKEN	0x0004
+#define D11_BCMA_IOCTL_PHYRESET		0x0008
+
+u8
+brcmf_sdio_chip_getinfidx(struct brcmf_chip *ci, u16 coreid)
+{
+	u8 idx;
+
+	for (idx = 0; idx < BRCMF_MAX_CORENUM; idx++)
+		if (coreid == ci->c_inf[idx].id)
+			return idx;
+
+	return BRCMF_MAX_CORENUM;
+}
+
+static u32
+brcmf_sdio_sb_corerev(struct brcmf_sdio_dev *sdiodev,
+		      struct brcmf_chip *ci, u16 coreid)
+{
+	u32 regdata;
+	u8 idx;
+
+	idx = brcmf_sdio_chip_getinfidx(ci, coreid);
+
+	regdata = brcmf_sdiod_regrl(sdiodev,
+				    CORE_SB(ci->c_inf[idx].base, sbidhigh),
+				    NULL);
+	return SBCOREREV(regdata);
+}
+
+static u32
+brcmf_sdio_ai_corerev(struct brcmf_sdio_dev *sdiodev,
+		      struct brcmf_chip *ci, u16 coreid)
+{
+	u8 idx;
+
+	idx = brcmf_sdio_chip_getinfidx(ci, coreid);
+
+	return (ci->c_inf[idx].cib & CIB_REV_MASK) >> CIB_REV_SHIFT;
+}
+
+static bool
+brcmf_sdio_sb_iscoreup(struct brcmf_sdio_dev *sdiodev,
+		       struct brcmf_chip *ci, u16 coreid)
+{
+	u32 regdata;
+	u8 idx;
+
+	idx = brcmf_sdio_chip_getinfidx(ci, coreid);
+	if (idx == BRCMF_MAX_CORENUM)
+		return false;
+
+	regdata = brcmf_sdiod_regrl(sdiodev,
+				    CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
+				    NULL);
+	regdata &= (SSB_TMSLOW_RESET | SSB_TMSLOW_REJECT |
+		    SSB_IMSTATE_REJECT | SSB_TMSLOW_CLOCK);
+	return SSB_TMSLOW_CLOCK == regdata;
+}
+
+static bool
+brcmf_sdio_ai_iscoreup(struct brcmf_sdio_dev *sdiodev,
+		       struct brcmf_chip *ci, u16 coreid)
+{
+	u32 regdata;
+	u8 idx;
+	bool ret;
+
+	idx = brcmf_sdio_chip_getinfidx(ci, coreid);
+	if (idx == BRCMF_MAX_CORENUM)
+		return false;
+
+	regdata = brcmf_sdiod_regrl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL,
+				    NULL);
+	ret = (regdata & (BCMA_IOCTL_FGC | BCMA_IOCTL_CLK)) == BCMA_IOCTL_CLK;
+
+	regdata = brcmf_sdiod_regrl(sdiodev,
+				    ci->c_inf[idx].wrapbase+BCMA_RESET_CTL,
+				    NULL);
+	ret = ret && ((regdata & BCMA_RESET_CTL_RESET) == 0);
+
+	return ret;
+}
+
+static void
+brcmf_sdio_sb_coredisable(struct brcmf_sdio_dev *sdiodev,
+			  struct brcmf_chip *ci, u16 coreid, u32 pre_resetbits,
+			  u32 in_resetbits)
+{
+	u32 regdata, base;
+	u8 idx;
+
+	idx = brcmf_sdio_chip_getinfidx(ci, coreid);
+	base = ci->c_inf[idx].base;
+
+	regdata = brcmf_sdiod_regrl(sdiodev, CORE_SB(base, sbtmstatelow), NULL);
+	if (regdata & SSB_TMSLOW_RESET)
+		return;
+
+	regdata = brcmf_sdiod_regrl(sdiodev, CORE_SB(base, sbtmstatelow), NULL);
+	if ((regdata & SSB_TMSLOW_CLOCK) != 0) {
+		/*
+		 * set target reject and spin until busy is clear
+		 * (preserve core-specific bits)
+		 */
+		regdata = brcmf_sdiod_regrl(sdiodev,
+					    CORE_SB(base, sbtmstatelow), NULL);
+		brcmf_sdiod_regwl(sdiodev, CORE_SB(base, sbtmstatelow),
+				  regdata | SSB_TMSLOW_REJECT, NULL);
+
+		regdata = brcmf_sdiod_regrl(sdiodev,
+					    CORE_SB(base, sbtmstatelow), NULL);
+		udelay(1);
+		SPINWAIT((brcmf_sdiod_regrl(sdiodev,
+					    CORE_SB(base, sbtmstatehigh),
+					    NULL) &
+			  SSB_TMSHIGH_BUSY), 100000);
+
+		regdata = brcmf_sdiod_regrl(sdiodev,
+					    CORE_SB(base, sbtmstatehigh),
+					    NULL);
+		if (regdata & SSB_TMSHIGH_BUSY)
+			brcmf_err("core state still busy\n");
+
+		regdata = brcmf_sdiod_regrl(sdiodev, CORE_SB(base, sbidlow),
+					    NULL);
+		if (regdata & SSB_IDLOW_INITIATOR) {
+			regdata = brcmf_sdiod_regrl(sdiodev,
+						    CORE_SB(base, sbimstate),
+						    NULL);
+			regdata |= SSB_IMSTATE_REJECT;
+			brcmf_sdiod_regwl(sdiodev, CORE_SB(base, sbimstate),
+					  regdata, NULL);
+			regdata = brcmf_sdiod_regrl(sdiodev,
+						    CORE_SB(base, sbimstate),
+						    NULL);
+			udelay(1);
+			SPINWAIT((brcmf_sdiod_regrl(sdiodev,
+						    CORE_SB(base, sbimstate),
+						    NULL) &
+				  SSB_IMSTATE_BUSY), 100000);
+		}
+
+		/* set reset and reject while enabling the clocks */
+		regdata = SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK |
+			  SSB_TMSLOW_REJECT | SSB_TMSLOW_RESET;
+		brcmf_sdiod_regwl(sdiodev, CORE_SB(base, sbtmstatelow),
+				  regdata, NULL);
+		regdata = brcmf_sdiod_regrl(sdiodev,
+					    CORE_SB(base, sbtmstatelow), NULL);
+		udelay(10);
+
+		/* clear the initiator reject bit */
+		regdata = brcmf_sdiod_regrl(sdiodev, CORE_SB(base, sbidlow),
+					    NULL);
+		if (regdata & SSB_IDLOW_INITIATOR) {
+			regdata = brcmf_sdiod_regrl(sdiodev,
+						    CORE_SB(base, sbimstate),
+						    NULL);
+			regdata &= ~SSB_IMSTATE_REJECT;
+			brcmf_sdiod_regwl(sdiodev, CORE_SB(base, sbimstate),
+					  regdata, NULL);
+		}
+	}
+
+	/* leave reset and reject asserted */
+	brcmf_sdiod_regwl(sdiodev, CORE_SB(base, sbtmstatelow),
+			  (SSB_TMSLOW_REJECT | SSB_TMSLOW_RESET), NULL);
+	udelay(1);
+}
+
+static void
+brcmf_sdio_ai_coredisable(struct brcmf_sdio_dev *sdiodev,
+			  struct brcmf_chip *ci, u16 coreid, u32 pre_resetbits,
+			  u32 in_resetbits)
+{
+	u8 idx;
+	u32 regdata;
+	u32 wrapbase;
+
+	idx = brcmf_sdio_chip_getinfidx(ci, coreid);
+	if (idx == BRCMF_MAX_CORENUM)
+		return;
+
+	wrapbase = ci->c_inf[idx].wrapbase;
+
+	/* if core is already in reset, just return */
+	regdata = brcmf_sdiod_regrl(sdiodev, wrapbase + BCMA_RESET_CTL, NULL);
+	if ((regdata & BCMA_RESET_CTL_RESET) != 0)
+		return;
+
+	/* configure reset */
+	brcmf_sdiod_regwl(sdiodev, wrapbase + BCMA_IOCTL, pre_resetbits |
+			  BCMA_IOCTL_FGC | BCMA_IOCTL_CLK, NULL);
+	regdata = brcmf_sdiod_regrl(sdiodev, wrapbase + BCMA_IOCTL, NULL);
+
+	/* put in reset */
+	brcmf_sdiod_regwl(sdiodev, wrapbase + BCMA_RESET_CTL,
+			  BCMA_RESET_CTL_RESET, NULL);
+	usleep_range(10, 20);
+
+	/* wait till reset is 1 */
+	SPINWAIT(brcmf_sdiod_regrl(sdiodev, wrapbase + BCMA_RESET_CTL, NULL) !=
+		 BCMA_RESET_CTL_RESET, 300);
+
+	/* post reset configure */
+	brcmf_sdiod_regwl(sdiodev, wrapbase + BCMA_IOCTL, pre_resetbits |
+			  BCMA_IOCTL_FGC | BCMA_IOCTL_CLK, NULL);
+	regdata = brcmf_sdiod_regrl(sdiodev, wrapbase + BCMA_IOCTL, NULL);
+}
+
+static void
+brcmf_sdio_sb_resetcore(struct brcmf_sdio_dev *sdiodev,
+			struct brcmf_chip *ci, u16 coreid,  u32 pre_resetbits,
+			u32 in_resetbits, u32 post_resetbits)
+{
+	u32 regdata;
+	u8 idx;
+
+	idx = brcmf_sdio_chip_getinfidx(ci, coreid);
+	if (idx == BRCMF_MAX_CORENUM)
+		return;
+
+	/*
+	 * Must do the disable sequence first to work for
+	 * arbitrary current core state.
+	 */
+	brcmf_sdio_sb_coredisable(sdiodev, ci, coreid, pre_resetbits,
+				  in_resetbits);
+
+	/*
+	 * Now do the initialization sequence.
+	 * set reset while enabling the clock and
+	 * forcing them on throughout the core
+	 */
+	brcmf_sdiod_regwl(sdiodev,
+			  CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
+			  SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK | SSB_TMSLOW_RESET,
+			  NULL);
+	regdata = brcmf_sdiod_regrl(sdiodev,
+				    CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
+				    NULL);
+	udelay(1);
+
+	/* clear any serror */
+	regdata = brcmf_sdiod_regrl(sdiodev,
+				    CORE_SB(ci->c_inf[idx].base, sbtmstatehigh),
+				    NULL);
+	if (regdata & SSB_TMSHIGH_SERR)
+		brcmf_sdiod_regwl(sdiodev,
+				  CORE_SB(ci->c_inf[idx].base, sbtmstatehigh),
+				  0, NULL);
+
+	regdata = brcmf_sdiod_regrl(sdiodev,
+				    CORE_SB(ci->c_inf[idx].base, sbimstate),
+				    NULL);
+	if (regdata & (SSB_IMSTATE_IBE | SSB_IMSTATE_TO))
+		brcmf_sdiod_regwl(sdiodev,
+				  CORE_SB(ci->c_inf[idx].base, sbimstate),
+				  regdata & ~(SSB_IMSTATE_IBE | SSB_IMSTATE_TO),
+				  NULL);
+
+	/* clear reset and allow it to propagate throughout the core */
+	brcmf_sdiod_regwl(sdiodev, CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
+			  SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK, NULL);
+	regdata = brcmf_sdiod_regrl(sdiodev,
+				    CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
+				    NULL);
+	udelay(1);
+
+	/* leave clock enabled */
+	brcmf_sdiod_regwl(sdiodev, CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
+			  SSB_TMSLOW_CLOCK, NULL);
+	regdata = brcmf_sdiod_regrl(sdiodev,
+				    CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
+				    NULL);
+	udelay(1);
+}
+
+static void
+brcmf_sdio_ai_resetcore(struct brcmf_sdio_dev *sdiodev,
+			struct brcmf_chip *ci, u16 coreid, u32 pre_resetbits,
+			u32 in_resetbits, u32 post_resetbits)
+{
+	u8 idx;
+	u32 regdata;
+	u32 wrapbase;
+
+	idx = brcmf_sdio_chip_getinfidx(ci, coreid);
+	if (idx == BRCMF_MAX_CORENUM)
+		return;
+
+	wrapbase = ci->c_inf[idx].wrapbase;
+
+	/* must disable first to work for arbitrary current core state */
+	brcmf_sdio_ai_coredisable(sdiodev, ci, coreid, pre_resetbits,
+				  in_resetbits);
+
+	while (brcmf_sdiod_regrl(sdiodev, wrapbase + BCMA_RESET_CTL, NULL) &
+	       BCMA_RESET_CTL_RESET) {
+		brcmf_sdiod_regwl(sdiodev, wrapbase + BCMA_RESET_CTL, 0, NULL);
+		usleep_range(40, 60);
+	}
+
+	brcmf_sdiod_regwl(sdiodev, wrapbase + BCMA_IOCTL, post_resetbits |
+			  BCMA_IOCTL_CLK, NULL);
+	regdata = brcmf_sdiod_regrl(sdiodev, wrapbase + BCMA_IOCTL, NULL);
+}
+
+#ifdef DEBUG
+/* safety check for chipinfo */
+static int brcmf_sdio_chip_cichk(struct brcmf_chip *ci)
+{
+	u8 core_idx;
+
+	/* check RAM core presence for ARM CM3 core */
+	core_idx = brcmf_sdio_chip_getinfidx(ci, BCMA_CORE_ARM_CM3);
+	if (BRCMF_MAX_CORENUM != core_idx) {
+		core_idx = brcmf_sdio_chip_getinfidx(ci,
+						     BCMA_CORE_INTERNAL_MEM);
+		if (BRCMF_MAX_CORENUM == core_idx) {
+			brcmf_err("RAM core not provided with ARM CM3 core\n");
+			return -ENODEV;
+		}
+	}
+
+	/* check RAM base for ARM CR4 core */
+	core_idx = brcmf_sdio_chip_getinfidx(ci, BCMA_CORE_ARM_CR4);
+	if (BRCMF_MAX_CORENUM != core_idx) {
+		if (ci->rambase == 0) {
+			brcmf_err("RAM base not provided with ARM CR4 core\n");
+			return -ENOMEM;
+		}
+	}
+
+	return 0;
+}
+#else	/* DEBUG */
+static inline int brcmf_sdio_chip_cichk(struct brcmf_chip *ci)
+{
+	return 0;
+}
+#endif
+
+static int brcmf_sdio_chip_recognition(struct brcmf_sdio_dev *sdiodev,
+				       struct brcmf_chip *ci)
+{
+	u32 regdata;
+	u32 socitype;
+
+	/* Get CC core rev
+	 * Chipid is assume to be at offset 0 from SI_ENUM_BASE
+	 * For different chiptypes or old sdio hosts w/o chipcommon,
+	 * other ways of recognition should be added here.
+	 */
+	regdata = brcmf_sdiod_regrl(sdiodev,
+				    CORE_CC_REG(SI_ENUM_BASE, chipid),
+				    NULL);
+	ci->chip = regdata & CID_ID_MASK;
+	ci->chiprev = (regdata & CID_REV_MASK) >> CID_REV_SHIFT;
+	if (sdiodev->func[0]->device == SDIO_DEVICE_ID_BROADCOM_4335_4339 &&
+	    ci->chiprev >= 2)
+		ci->chip = BCM4339_CHIP_ID;
+	socitype = (regdata & CID_TYPE_MASK) >> CID_TYPE_SHIFT;
+
+	brcmf_dbg(INFO, "found %s chip: id=0x%x, rev=%d\n",
+		  socitype == SOCI_SB ? "SB" : "AXI", ci->chip, ci->chiprev);
+
+	if (socitype == SOCI_SB) {
+		if (ci->chip != BCM4329_CHIP_ID) {
+			brcmf_err("SB chip is not supported\n");
+			return -ENODEV;
+		}
+		ci->iscoreup = brcmf_sdio_sb_iscoreup;
+		ci->corerev = brcmf_sdio_sb_corerev;
+		ci->coredisable = brcmf_sdio_sb_coredisable;
+		ci->resetcore = brcmf_sdio_sb_resetcore;
+
+		ci->c_inf[0].id = BCMA_CORE_CHIPCOMMON;
+		ci->c_inf[0].base = SI_ENUM_BASE;
+		ci->c_inf[1].id = BCMA_CORE_SDIO_DEV;
+		ci->c_inf[1].base = BCM4329_CORE_BUS_BASE;
+		ci->c_inf[2].id = BCMA_CORE_INTERNAL_MEM;
+		ci->c_inf[2].base = BCM4329_CORE_SOCRAM_BASE;
+		ci->c_inf[3].id = BCMA_CORE_ARM_CM3;
+		ci->c_inf[3].base = BCM4329_CORE_ARM_BASE;
+		ci->c_inf[4].id = BCMA_CORE_80211;
+		ci->c_inf[4].base = BCM43xx_CORE_D11_BASE;
+		ci->ramsize = BCM4329_RAMSIZE;
+	} else if (socitype == SOCI_AI) {
+		ci->iscoreup = brcmf_sdio_ai_iscoreup;
+		ci->corerev = brcmf_sdio_ai_corerev;
+		ci->coredisable = brcmf_sdio_ai_coredisable;
+		ci->resetcore = brcmf_sdio_ai_resetcore;
+
+		ci->c_inf[0].id = BCMA_CORE_CHIPCOMMON;
+		ci->c_inf[0].base = SI_ENUM_BASE;
+
+		/* Address of cores for new chips should be added here */
+		switch (ci->chip) {
+		case BCM43143_CHIP_ID:
+			ci->c_inf[0].wrapbase = ci->c_inf[0].base + 0x00100000;
+			ci->c_inf[0].cib = 0x2b000000;
+			ci->c_inf[1].id = BCMA_CORE_SDIO_DEV;
+			ci->c_inf[1].base = BCM43143_CORE_BUS_BASE;
+			ci->c_inf[1].wrapbase = ci->c_inf[1].base + 0x00100000;
+			ci->c_inf[1].cib = 0x18000000;
+			ci->c_inf[2].id = BCMA_CORE_INTERNAL_MEM;
+			ci->c_inf[2].base = BCM43143_CORE_SOCRAM_BASE;
+			ci->c_inf[2].wrapbase = ci->c_inf[2].base + 0x00100000;
+			ci->c_inf[2].cib = 0x14000000;
+			ci->c_inf[3].id = BCMA_CORE_ARM_CM3;
+			ci->c_inf[3].base = BCM43143_CORE_ARM_BASE;
+			ci->c_inf[3].wrapbase = ci->c_inf[3].base + 0x00100000;
+			ci->c_inf[3].cib = 0x07000000;
+			ci->c_inf[4].id = BCMA_CORE_80211;
+			ci->c_inf[4].base = BCM43xx_CORE_D11_BASE;
+			ci->c_inf[4].wrapbase = ci->c_inf[4].base + 0x00100000;
+			ci->ramsize = BCM43143_RAMSIZE;
+			break;
+		case BCM43241_CHIP_ID:
+			ci->c_inf[0].wrapbase = 0x18100000;
+			ci->c_inf[0].cib = 0x2a084411;
+			ci->c_inf[1].id = BCMA_CORE_SDIO_DEV;
+			ci->c_inf[1].base = 0x18002000;
+			ci->c_inf[1].wrapbase = 0x18102000;
+			ci->c_inf[1].cib = 0x0e004211;
+			ci->c_inf[2].id = BCMA_CORE_INTERNAL_MEM;
+			ci->c_inf[2].base = 0x18004000;
+			ci->c_inf[2].wrapbase = 0x18104000;
+			ci->c_inf[2].cib = 0x14080401;
+			ci->c_inf[3].id = BCMA_CORE_ARM_CM3;
+			ci->c_inf[3].base = 0x18003000;
+			ci->c_inf[3].wrapbase = 0x18103000;
+			ci->c_inf[3].cib = 0x07004211;
+			ci->c_inf[4].id = BCMA_CORE_80211;
+			ci->c_inf[4].base = BCM43xx_CORE_D11_BASE;
+			ci->c_inf[4].wrapbase = ci->c_inf[4].base + 0x00100000;
+			ci->ramsize = 0x90000;
+			break;
+		case BCM4330_CHIP_ID:
+			ci->c_inf[0].wrapbase = 0x18100000;
+			ci->c_inf[0].cib = 0x27004211;
+			ci->c_inf[1].id = BCMA_CORE_SDIO_DEV;
+			ci->c_inf[1].base = 0x18002000;
+			ci->c_inf[1].wrapbase = 0x18102000;
+			ci->c_inf[1].cib = 0x07004211;
+			ci->c_inf[2].id = BCMA_CORE_INTERNAL_MEM;
+			ci->c_inf[2].base = 0x18004000;
+			ci->c_inf[2].wrapbase = 0x18104000;
+			ci->c_inf[2].cib = 0x0d080401;
+			ci->c_inf[3].id = BCMA_CORE_ARM_CM3;
+			ci->c_inf[3].base = 0x18003000;
+			ci->c_inf[3].wrapbase = 0x18103000;
+			ci->c_inf[3].cib = 0x03004211;
+			ci->c_inf[4].id = BCMA_CORE_80211;
+			ci->c_inf[4].base = BCM43xx_CORE_D11_BASE;
+			ci->c_inf[4].wrapbase = ci->c_inf[4].base + 0x00100000;
+			ci->ramsize = 0x48000;
+			break;
+		case BCM4334_CHIP_ID:
+			ci->c_inf[0].wrapbase = 0x18100000;
+			ci->c_inf[0].cib = 0x29004211;
+			ci->c_inf[1].id = BCMA_CORE_SDIO_DEV;
+			ci->c_inf[1].base = 0x18002000;
+			ci->c_inf[1].wrapbase = 0x18102000;
+			ci->c_inf[1].cib = 0x0d004211;
+			ci->c_inf[2].id = BCMA_CORE_INTERNAL_MEM;
+			ci->c_inf[2].base = 0x18004000;
+			ci->c_inf[2].wrapbase = 0x18104000;
+			ci->c_inf[2].cib = 0x13080401;
+			ci->c_inf[3].id = BCMA_CORE_ARM_CM3;
+			ci->c_inf[3].base = 0x18003000;
+			ci->c_inf[3].wrapbase = 0x18103000;
+			ci->c_inf[3].cib = 0x07004211;
+			ci->c_inf[4].id = BCMA_CORE_80211;
+			ci->c_inf[4].base = BCM43xx_CORE_D11_BASE;
+			ci->c_inf[4].wrapbase = ci->c_inf[4].base + 0x00100000;
+			ci->ramsize = 0x80000;
+			break;
+		case BCM4335_CHIP_ID:
+			ci->c_inf[0].wrapbase = 0x18100000;
+			ci->c_inf[0].cib = 0x2b084411;
+			ci->c_inf[1].id = BCMA_CORE_SDIO_DEV;
+			ci->c_inf[1].base = 0x18005000;
+			ci->c_inf[1].wrapbase = 0x18105000;
+			ci->c_inf[1].cib = 0x0f004211;
+			ci->c_inf[2].id = BCMA_CORE_ARM_CR4;
+			ci->c_inf[2].base = 0x18002000;
+			ci->c_inf[2].wrapbase = 0x18102000;
+			ci->c_inf[2].cib = 0x01084411;
+			ci->c_inf[3].id = BCMA_CORE_80211;
+			ci->c_inf[3].base = BCM43xx_CORE_D11_BASE;
+			ci->c_inf[3].wrapbase = ci->c_inf[3].base + 0x00100000;
+			ci->ramsize = 0xc0000;
+			ci->rambase = 0x180000;
+			break;
+		case BCM43362_CHIP_ID:
+			ci->c_inf[0].wrapbase = 0x18100000;
+			ci->c_inf[0].cib = 0x27004211;
+			ci->c_inf[1].id = BCMA_CORE_SDIO_DEV;
+			ci->c_inf[1].base = 0x18002000;
+			ci->c_inf[1].wrapbase = 0x18102000;
+			ci->c_inf[1].cib = 0x0a004211;
+			ci->c_inf[2].id = BCMA_CORE_INTERNAL_MEM;
+			ci->c_inf[2].base = 0x18004000;
+			ci->c_inf[2].wrapbase = 0x18104000;
+			ci->c_inf[2].cib = 0x08080401;
+			ci->c_inf[3].id = BCMA_CORE_ARM_CM3;
+			ci->c_inf[3].base = 0x18003000;
+			ci->c_inf[3].wrapbase = 0x18103000;
+			ci->c_inf[3].cib = 0x03004211;
+			ci->c_inf[4].id = BCMA_CORE_80211;
+			ci->c_inf[4].base = BCM43xx_CORE_D11_BASE;
+			ci->c_inf[4].wrapbase = ci->c_inf[4].base + 0x00100000;
+			ci->ramsize = 0x3C000;
+			break;
+		case BCM4339_CHIP_ID:
+			ci->c_inf[0].wrapbase = 0x18100000;
+			ci->c_inf[0].cib = 0x2e084411;
+			ci->c_inf[1].id = BCMA_CORE_SDIO_DEV;
+			ci->c_inf[1].base = 0x18005000;
+			ci->c_inf[1].wrapbase = 0x18105000;
+			ci->c_inf[1].cib = 0x15004211;
+			ci->c_inf[2].id = BCMA_CORE_ARM_CR4;
+			ci->c_inf[2].base = 0x18002000;
+			ci->c_inf[2].wrapbase = 0x18102000;
+			ci->c_inf[2].cib = 0x04084411;
+			ci->c_inf[3].id = BCMA_CORE_80211;
+			ci->c_inf[3].base = BCM43xx_CORE_D11_BASE;
+			ci->c_inf[3].wrapbase = ci->c_inf[3].base + 0x00100000;
+			ci->ramsize = 0xc0000;
+			ci->rambase = 0x180000;
+			break;
+		default:
+			brcmf_err("AXI chip is not supported\n");
+			return -ENODEV;
+		}
+	} else {
+		brcmf_err("chip backplane type %u is not supported\n",
+			  socitype);
+		return -ENODEV;
+	}
+
+	return brcmf_sdio_chip_cichk(ci);
+}
+
+static void
+brcmf_sdio_chip_buscoresetup(struct brcmf_sdio_dev *sdiodev,
+			     struct brcmf_chip *ci)
+{
+	u32 base = ci->c_inf[0].base;
+
+	/* get chipcommon rev */
+	ci->c_inf[0].rev = ci->corerev(sdiodev, ci, ci->c_inf[0].id);
+
+	/* get chipcommon capabilites */
+	ci->c_inf[0].caps = brcmf_sdiod_regrl(sdiodev,
+					      CORE_CC_REG(base, capabilities),
+					      NULL);
+
+	/* get pmu caps & rev */
+	if (ci->c_inf[0].caps & CC_CAP_PMU) {
+		ci->pmucaps =
+			brcmf_sdiod_regrl(sdiodev,
+					  CORE_CC_REG(base, pmucapabilities),
+					  NULL);
+		ci->pmurev = ci->pmucaps & PCAP_REV_MASK;
+	}
+
+	ci->c_inf[1].rev = ci->corerev(sdiodev, ci, ci->c_inf[1].id);
+
+	brcmf_dbg(INFO, "ccrev=%d, pmurev=%d, buscore rev/type=%d/0x%x\n",
+		  ci->c_inf[0].rev, ci->pmurev,
+		  ci->c_inf[1].rev, ci->c_inf[1].id);
+
+	/*
+	 * Make sure any on-chip ARM is off (in case strapping is wrong),
+	 * or downloaded code was already running.
+	 */
+	ci->coredisable(sdiodev, ci, BCMA_CORE_ARM_CM3, 0, 0);
+}
+
+int brcmf_sdio_chip_attach(struct brcmf_sdio_dev *sdiodev,
+			   struct brcmf_chip **ci_ptr)
+{
+	int ret;
+	struct brcmf_chip *ci;
+
+	brcmf_dbg(TRACE, "Enter\n");
+
+	ci = kzalloc(sizeof(*ci), GFP_ATOMIC);
+	if (!ci)
+		return -ENOMEM;
+
+	ret = brcmf_sdio_buscoreprep(sdiodev);
+	if (ret != 0)
+		goto err;
+
+	ret = brcmf_sdio_chip_recognition(sdiodev, ci);
+	if (ret != 0)
+		goto err;
+
+	brcmf_sdio_chip_buscoresetup(sdiodev, ci);
+
+	brcmf_sdiod_regwl(sdiodev, CORE_CC_REG(ci->c_inf[0].base, gpiopullup),
+			  0, NULL);
+	brcmf_sdiod_regwl(sdiodev, CORE_CC_REG(ci->c_inf[0].base, gpiopulldown),
+			  0, NULL);
+
+	*ci_ptr = ci;
+	return 0;
+
+err:
+	kfree(ci);
+	return ret;
+}
+
+void
+brcmf_sdio_chip_detach(struct brcmf_chip **ci_ptr)
+{
+	brcmf_dbg(TRACE, "Enter\n");
+
+	kfree(*ci_ptr);
+	*ci_ptr = NULL;
+}
+
+static void
+brcmf_sdio_chip_cm3_enterdl(struct brcmf_sdio_dev *sdiodev,
+			    struct brcmf_chip *ci)
+{
+	ci->coredisable(sdiodev, ci, BCMA_CORE_ARM_CM3, 0, 0);
+	ci->resetcore(sdiodev, ci, BCMA_CORE_80211,
+		      D11_BCMA_IOCTL_PHYRESET | D11_BCMA_IOCTL_PHYCLOCKEN,
+		      D11_BCMA_IOCTL_PHYCLOCKEN, D11_BCMA_IOCTL_PHYCLOCKEN);
+	ci->resetcore(sdiodev, ci, BCMA_CORE_INTERNAL_MEM, 0, 0, 0);
+}
+
+static bool brcmf_sdio_chip_cm3_exitdl(struct brcmf_sdio_dev *sdiodev,
+				       struct brcmf_chip *ci)
+{
+	u8 core_idx;
+	u32 reg_addr;
+
+	if (!ci->iscoreup(sdiodev, ci, BCMA_CORE_INTERNAL_MEM)) {
+		brcmf_err("SOCRAM core is down after reset?\n");
+		return false;
+	}
+
+	/* clear all interrupts */
+	core_idx = brcmf_sdio_chip_getinfidx(ci, BCMA_CORE_SDIO_DEV);
+	reg_addr = ci->c_inf[core_idx].base;
+	reg_addr += offsetof(struct sdpcmd_regs, intstatus);
+	brcmf_sdiod_regwl(sdiodev, reg_addr, 0xFFFFFFFF, NULL);
+
+	ci->resetcore(sdiodev, ci, BCMA_CORE_ARM_CM3, 0, 0, 0);
+
+	return true;
+}
+
+static inline void
+brcmf_sdio_chip_cr4_enterdl(struct brcmf_sdio_dev *sdiodev,
+			    struct brcmf_chip *ci)
+{
+	u8 idx;
+	u32 regdata;
+	u32 wrapbase;
+	idx = brcmf_sdio_chip_getinfidx(ci, BCMA_CORE_ARM_CR4);
+
+	if (idx == BRCMF_MAX_CORENUM)
+		return;
+
+	wrapbase = ci->c_inf[idx].wrapbase;
+	regdata = brcmf_sdiod_regrl(sdiodev, wrapbase + BCMA_IOCTL, NULL);
+	regdata &= ARMCR4_BCMA_IOCTL_CPUHALT;
+	ci->resetcore(sdiodev, ci, BCMA_CORE_ARM_CR4, regdata,
+		      ARMCR4_BCMA_IOCTL_CPUHALT, ARMCR4_BCMA_IOCTL_CPUHALT);
+	ci->resetcore(sdiodev, ci, BCMA_CORE_80211,
+		      D11_BCMA_IOCTL_PHYRESET | D11_BCMA_IOCTL_PHYCLOCKEN,
+		      D11_BCMA_IOCTL_PHYCLOCKEN, D11_BCMA_IOCTL_PHYCLOCKEN);
+}
+
+static bool brcmf_sdio_chip_cr4_exitdl(struct brcmf_sdio_dev *sdiodev,
+				       struct brcmf_chip *ci, u32 rstvec)
+{
+	u8 core_idx;
+	u32 reg_addr;
+
+	/* clear all interrupts */
+	core_idx = brcmf_sdio_chip_getinfidx(ci, BCMA_CORE_SDIO_DEV);
+	reg_addr = ci->c_inf[core_idx].base;
+	reg_addr += offsetof(struct sdpcmd_regs, intstatus);
+	brcmf_sdiod_regwl(sdiodev, reg_addr, 0xFFFFFFFF, NULL);
+
+	/* Write reset vector to address 0 */
+	brcmf_sdiod_ramrw(sdiodev, true, 0, (void *)&rstvec,
+			  sizeof(rstvec));
+
+	/* restore ARM */
+	ci->resetcore(sdiodev, ci, BCMA_CORE_ARM_CR4, ARMCR4_BCMA_IOCTL_CPUHALT,
+		      0, 0);
+
+	return true;
+}
+
+void brcmf_sdio_chip_enter_download(struct brcmf_sdio_dev *sdiodev,
+				    struct brcmf_chip *ci)
+{
+	u8 arm_core_idx;
+
+	arm_core_idx = brcmf_sdio_chip_getinfidx(ci, BCMA_CORE_ARM_CM3);
+	if (BRCMF_MAX_CORENUM != arm_core_idx) {
+		brcmf_sdio_chip_cm3_enterdl(sdiodev, ci);
+		return;
+	}
+
+	brcmf_sdio_chip_cr4_enterdl(sdiodev, ci);
+}
+
+bool brcmf_sdio_chip_exit_download(struct brcmf_sdio_dev *sdiodev,
+				   struct brcmf_chip *ci, u32 rstvec)
+{
+	u8 arm_core_idx;
+
+	arm_core_idx = brcmf_sdio_chip_getinfidx(ci, BCMA_CORE_ARM_CM3);
+	if (BRCMF_MAX_CORENUM != arm_core_idx)
+		return brcmf_sdio_chip_cm3_exitdl(sdiodev, ci);
+
+	return brcmf_sdio_chip_cr4_exitdl(sdiodev, ci, rstvec);
+}
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/chip.h b/drivers/net/wireless/brcm80211/brcmfmac/chip.h
new file mode 100644
index 000000000000..2bc00c5d1a7f
--- /dev/null
+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.h
@@ -0,0 +1,228 @@
+/*
+ * Copyright (c) 2011 Broadcom Corporation
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _BRCMFMAC_SDIO_CHIP_H_
+#define _BRCMFMAC_SDIO_CHIP_H_
+
+/*
+ * Core reg address translation.
+ * Both macro's returns a 32 bits byte address on the backplane bus.
+ */
+#define CORE_CC_REG(base, field) \
+		(base + offsetof(struct chipcregs, field))
+#define CORE_BUS_REG(base, field) \
+		(base + offsetof(struct sdpcmd_regs, field))
+#define CORE_SB(base, field) \
+		(base + SBCONFIGOFF + offsetof(struct sbconfig, field))
+
+/* SDIO function 1 register CHIPCLKCSR */
+/* Force ALP request to backplane */
+#define SBSDIO_FORCE_ALP		0x01
+/* Force HT request to backplane */
+#define SBSDIO_FORCE_HT			0x02
+/* Force ILP request to backplane */
+#define SBSDIO_FORCE_ILP		0x04
+/* Make ALP ready (power up xtal) */
+#define SBSDIO_ALP_AVAIL_REQ		0x08
+/* Make HT ready (power up PLL) */
+#define SBSDIO_HT_AVAIL_REQ		0x10
+/* Squelch clock requests from HW */
+#define SBSDIO_FORCE_HW_CLKREQ_OFF	0x20
+/* Status: ALP is ready */
+#define SBSDIO_ALP_AVAIL		0x40
+/* Status: HT is ready */
+#define SBSDIO_HT_AVAIL			0x80
+#define SBSDIO_AVBITS		(SBSDIO_HT_AVAIL | SBSDIO_ALP_AVAIL)
+#define SBSDIO_ALPAV(regval)	((regval) & SBSDIO_AVBITS)
+#define SBSDIO_HTAV(regval)	(((regval) & SBSDIO_AVBITS) == SBSDIO_AVBITS)
+#define SBSDIO_ALPONLY(regval)	(SBSDIO_ALPAV(regval) && !SBSDIO_HTAV(regval))
+#define SBSDIO_CLKAV(regval, alponly) \
+	(SBSDIO_ALPAV(regval) && (alponly ? 1 : SBSDIO_HTAV(regval)))
+
+#define BRCMF_MAX_CORENUM	6
+
+struct brcmf_core {
+	u16 id;
+	u16 rev;
+	u32 base;
+	u32 wrapbase;
+	u32 caps;
+	u32 cib;
+};
+
+struct brcmf_chip {
+	u32 chip;
+	u32 chiprev;
+	/* core info */
+	/* always put chipcommon core at 0, bus core at 1 */
+	struct brcmf_core c_inf[BRCMF_MAX_CORENUM];
+	u32 pmurev;
+	u32 pmucaps;
+	u32 ramsize;
+	u32 rambase;
+	u32 rst_vec;	/* reset vertor for ARM CR4 core */
+
+	bool (*iscoreup)(struct brcmf_sdio_dev *sdiodev, struct brcmf_chip *ci,
+			 u16 coreid);
+	u32 (*corerev)(struct brcmf_sdio_dev *sdiodev, struct brcmf_chip *ci,
+			 u16 coreid);
+	void (*coredisable)(struct brcmf_sdio_dev *sdiodev,
+			struct brcmf_chip *ci, u16 coreid, u32 pre_resetbits,
+			u32 in_resetbits);
+	void (*resetcore)(struct brcmf_sdio_dev *sdiodev,
+			struct brcmf_chip *ci, u16 coreid, u32 pre_resetbits,
+			u32 in_resetbits, u32 post_resetbits);
+};
+
+struct sbconfig {
+	u32 PAD[2];
+	u32 sbipsflag;	/* initiator port ocp slave flag */
+	u32 PAD[3];
+	u32 sbtpsflag;	/* target port ocp slave flag */
+	u32 PAD[11];
+	u32 sbtmerrloga;	/* (sonics >= 2.3) */
+	u32 PAD;
+	u32 sbtmerrlog;	/* (sonics >= 2.3) */
+	u32 PAD[3];
+	u32 sbadmatch3;	/* address match3 */
+	u32 PAD;
+	u32 sbadmatch2;	/* address match2 */
+	u32 PAD;
+	u32 sbadmatch1;	/* address match1 */
+	u32 PAD[7];
+	u32 sbimstate;	/* initiator agent state */
+	u32 sbintvec;	/* interrupt mask */
+	u32 sbtmstatelow;	/* target state */
+	u32 sbtmstatehigh;	/* target state */
+	u32 sbbwa0;		/* bandwidth allocation table0 */
+	u32 PAD;
+	u32 sbimconfiglow;	/* initiator configuration */
+	u32 sbimconfighigh;	/* initiator configuration */
+	u32 sbadmatch0;	/* address match0 */
+	u32 PAD;
+	u32 sbtmconfiglow;	/* target configuration */
+	u32 sbtmconfighigh;	/* target configuration */
+	u32 sbbconfig;	/* broadcast configuration */
+	u32 PAD;
+	u32 sbbstate;	/* broadcast state */
+	u32 PAD[3];
+	u32 sbactcnfg;	/* activate configuration */
+	u32 PAD[3];
+	u32 sbflagst;	/* current sbflags */
+	u32 PAD[3];
+	u32 sbidlow;		/* identification */
+	u32 sbidhigh;	/* identification */
+};
+
+/* sdio core registers */
+struct sdpcmd_regs {
+	u32 corecontrol;		/* 0x00, rev8 */
+	u32 corestatus;			/* rev8 */
+	u32 PAD[1];
+	u32 biststatus;			/* rev8 */
+
+	/* PCMCIA access */
+	u16 pcmciamesportaladdr;	/* 0x010, rev8 */
+	u16 PAD[1];
+	u16 pcmciamesportalmask;	/* rev8 */
+	u16 PAD[1];
+	u16 pcmciawrframebc;		/* rev8 */
+	u16 PAD[1];
+	u16 pcmciaunderflowtimer;	/* rev8 */
+	u16 PAD[1];
+
+	/* interrupt */
+	u32 intstatus;			/* 0x020, rev8 */
+	u32 hostintmask;		/* rev8 */
+	u32 intmask;			/* rev8 */
+	u32 sbintstatus;		/* rev8 */
+	u32 sbintmask;			/* rev8 */
+	u32 funcintmask;		/* rev4 */
+	u32 PAD[2];
+	u32 tosbmailbox;		/* 0x040, rev8 */
+	u32 tohostmailbox;		/* rev8 */
+	u32 tosbmailboxdata;		/* rev8 */
+	u32 tohostmailboxdata;		/* rev8 */
+
+	/* synchronized access to registers in SDIO clock domain */
+	u32 sdioaccess;			/* 0x050, rev8 */
+	u32 PAD[3];
+
+	/* PCMCIA frame control */
+	u8 pcmciaframectrl;		/* 0x060, rev8 */
+	u8 PAD[3];
+	u8 pcmciawatermark;		/* rev8 */
+	u8 PAD[155];
+
+	/* interrupt batching control */
+	u32 intrcvlazy;			/* 0x100, rev8 */
+	u32 PAD[3];
+
+	/* counters */
+	u32 cmd52rd;			/* 0x110, rev8 */
+	u32 cmd52wr;			/* rev8 */
+	u32 cmd53rd;			/* rev8 */
+	u32 cmd53wr;			/* rev8 */
+	u32 abort;			/* rev8 */
+	u32 datacrcerror;		/* rev8 */
+	u32 rdoutofsync;		/* rev8 */
+	u32 wroutofsync;		/* rev8 */
+	u32 writebusy;			/* rev8 */
+	u32 readwait;			/* rev8 */
+	u32 readterm;			/* rev8 */
+	u32 writeterm;			/* rev8 */
+	u32 PAD[40];
+	u32 clockctlstatus;		/* rev8 */
+	u32 PAD[7];
+
+	u32 PAD[128];			/* DMA engines */
+
+	/* SDIO/PCMCIA CIS region */
+	char cis[512];			/* 0x400-0x5ff, rev6 */
+
+	/* PCMCIA function control registers */
+	char pcmciafcr[256];		/* 0x600-6ff, rev6 */
+	u16 PAD[55];
+
+	/* PCMCIA backplane access */
+	u16 backplanecsr;		/* 0x76E, rev6 */
+	u16 backplaneaddr0;		/* rev6 */
+	u16 backplaneaddr1;		/* rev6 */
+	u16 backplaneaddr2;		/* rev6 */
+	u16 backplaneaddr3;		/* rev6 */
+	u16 backplanedata0;		/* rev6 */
+	u16 backplanedata1;		/* rev6 */
+	u16 backplanedata2;		/* rev6 */
+	u16 backplanedata3;		/* rev6 */
+	u16 PAD[31];
+
+	/* sprom "size" & "blank" info */
+	u16 spromstatus;		/* 0x7BE, rev2 */
+	u32 PAD[464];
+
+	u16 PAD[0x80];
+};
+
+int brcmf_sdio_chip_attach(struct brcmf_sdio_dev *sdiodev,
+			   struct brcmf_chip **ci_ptr);
+void brcmf_sdio_chip_detach(struct brcmf_chip **ci_ptr);
+u8 brcmf_sdio_chip_getinfidx(struct brcmf_chip *ci, u16 coreid);
+void brcmf_sdio_chip_enter_download(struct brcmf_sdio_dev *sdiodev,
+				    struct brcmf_chip *ci);
+bool brcmf_sdio_chip_exit_download(struct brcmf_sdio_dev *sdiodev,
+				   struct brcmf_chip *ci, u32 rstvec);
+
+#endif		/* _BRCMFMAC_SDIO_CHIP_H_ */
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index 090ce1875f15..d78fffb43964 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -40,7 +40,7 @@
 #include <brcm_hw_ids.h>
 #include <soc.h>
 #include "sdio_host.h"
-#include "sdio_chip.h"
+#include "chip.h"
 #include "nvram.h"
 
 #define DCMD_RESP_TIMEOUT  2000	/* In milli second */
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c
deleted file mode 100644
index 1ce8cb7e25ce..000000000000
--- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c
+++ /dev/null
@@ -1,802 +0,0 @@
-/*
- * Copyright (c) 2011 Broadcom Corporation
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
- * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
- * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-/* ***** SDIO interface chip backplane handle functions ***** */
-
-#include <linux/types.h>
-#include <linux/netdevice.h>
-#include <linux/mmc/card.h>
-#include <linux/mmc/sdio_func.h>
-#include <linux/mmc/sdio_ids.h>
-#include <linux/ssb/ssb_regs.h>
-#include <linux/bcma/bcma.h>
-
-#include <chipcommon.h>
-#include <brcm_hw_ids.h>
-#include <brcmu_wifi.h>
-#include <brcmu_utils.h>
-#include <soc.h>
-#include "dhd_dbg.h"
-#include "sdio_host.h"
-#include "sdio_chip.h"
-
-/* chip core base & ramsize */
-/* bcm4329 */
-/* SDIO device core, ID 0x829 */
-#define BCM4329_CORE_BUS_BASE		0x18011000
-/* internal memory core, ID 0x80e */
-#define BCM4329_CORE_SOCRAM_BASE	0x18003000
-/* ARM Cortex M3 core, ID 0x82a */
-#define BCM4329_CORE_ARM_BASE		0x18002000
-#define BCM4329_RAMSIZE			0x48000
-
-/* bcm43143 */
-/* SDIO device core */
-#define BCM43143_CORE_BUS_BASE		0x18002000
-/* internal memory core */
-#define BCM43143_CORE_SOCRAM_BASE	0x18004000
-/* ARM Cortex M3 core, ID 0x82a */
-#define BCM43143_CORE_ARM_BASE		0x18003000
-#define BCM43143_RAMSIZE		0x70000
-
-/* All D11 cores, ID 0x812 */
-#define BCM43xx_CORE_D11_BASE		0x18001000
-
-#define	SBCOREREV(sbidh) \
-	((((sbidh) & SSB_IDHIGH_RCHI) >> SSB_IDHIGH_RCHI_SHIFT) | \
-	  ((sbidh) & SSB_IDHIGH_RCLO))
-
-/* SOC Interconnect types (aka chip types) */
-#define SOCI_SB		0
-#define SOCI_AI		1
-
-/* EROM CompIdentB */
-#define CIB_REV_MASK		0xff000000
-#define CIB_REV_SHIFT		24
-
-/* ARM CR4 core specific control flag bits */
-#define ARMCR4_BCMA_IOCTL_CPUHALT	0x0020
-
-/* D11 core specific control flag bits */
-#define D11_BCMA_IOCTL_PHYCLOCKEN	0x0004
-#define D11_BCMA_IOCTL_PHYRESET		0x0008
-
-u8
-brcmf_sdio_chip_getinfidx(struct brcmf_chip *ci, u16 coreid)
-{
-	u8 idx;
-
-	for (idx = 0; idx < BRCMF_MAX_CORENUM; idx++)
-		if (coreid == ci->c_inf[idx].id)
-			return idx;
-
-	return BRCMF_MAX_CORENUM;
-}
-
-static u32
-brcmf_sdio_sb_corerev(struct brcmf_sdio_dev *sdiodev,
-		      struct brcmf_chip *ci, u16 coreid)
-{
-	u32 regdata;
-	u8 idx;
-
-	idx = brcmf_sdio_chip_getinfidx(ci, coreid);
-
-	regdata = brcmf_sdiod_regrl(sdiodev,
-				    CORE_SB(ci->c_inf[idx].base, sbidhigh),
-				    NULL);
-	return SBCOREREV(regdata);
-}
-
-static u32
-brcmf_sdio_ai_corerev(struct brcmf_sdio_dev *sdiodev,
-		      struct brcmf_chip *ci, u16 coreid)
-{
-	u8 idx;
-
-	idx = brcmf_sdio_chip_getinfidx(ci, coreid);
-
-	return (ci->c_inf[idx].cib & CIB_REV_MASK) >> CIB_REV_SHIFT;
-}
-
-static bool
-brcmf_sdio_sb_iscoreup(struct brcmf_sdio_dev *sdiodev,
-		       struct brcmf_chip *ci, u16 coreid)
-{
-	u32 regdata;
-	u8 idx;
-
-	idx = brcmf_sdio_chip_getinfidx(ci, coreid);
-	if (idx == BRCMF_MAX_CORENUM)
-		return false;
-
-	regdata = brcmf_sdiod_regrl(sdiodev,
-				    CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
-				    NULL);
-	regdata &= (SSB_TMSLOW_RESET | SSB_TMSLOW_REJECT |
-		    SSB_IMSTATE_REJECT | SSB_TMSLOW_CLOCK);
-	return (SSB_TMSLOW_CLOCK == regdata);
-}
-
-static bool
-brcmf_sdio_ai_iscoreup(struct brcmf_sdio_dev *sdiodev,
-		       struct brcmf_chip *ci, u16 coreid)
-{
-	u32 regdata;
-	u8 idx;
-	bool ret;
-
-	idx = brcmf_sdio_chip_getinfidx(ci, coreid);
-	if (idx == BRCMF_MAX_CORENUM)
-		return false;
-
-	regdata = brcmf_sdiod_regrl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL,
-				    NULL);
-	ret = (regdata & (BCMA_IOCTL_FGC | BCMA_IOCTL_CLK)) == BCMA_IOCTL_CLK;
-
-	regdata = brcmf_sdiod_regrl(sdiodev,
-				    ci->c_inf[idx].wrapbase+BCMA_RESET_CTL,
-				    NULL);
-	ret = ret && ((regdata & BCMA_RESET_CTL_RESET) == 0);
-
-	return ret;
-}
-
-static void
-brcmf_sdio_sb_coredisable(struct brcmf_sdio_dev *sdiodev,
-			  struct brcmf_chip *ci, u16 coreid, u32 pre_resetbits,
-			  u32 in_resetbits)
-{
-	u32 regdata, base;
-	u8 idx;
-
-	idx = brcmf_sdio_chip_getinfidx(ci, coreid);
-	base = ci->c_inf[idx].base;
-
-	regdata = brcmf_sdiod_regrl(sdiodev, CORE_SB(base, sbtmstatelow), NULL);
-	if (regdata & SSB_TMSLOW_RESET)
-		return;
-
-	regdata = brcmf_sdiod_regrl(sdiodev, CORE_SB(base, sbtmstatelow), NULL);
-	if ((regdata & SSB_TMSLOW_CLOCK) != 0) {
-		/*
-		 * set target reject and spin until busy is clear
-		 * (preserve core-specific bits)
-		 */
-		regdata = brcmf_sdiod_regrl(sdiodev,
-					    CORE_SB(base, sbtmstatelow), NULL);
-		brcmf_sdiod_regwl(sdiodev, CORE_SB(base, sbtmstatelow),
-				  regdata | SSB_TMSLOW_REJECT, NULL);
-
-		regdata = brcmf_sdiod_regrl(sdiodev,
-					    CORE_SB(base, sbtmstatelow), NULL);
-		udelay(1);
-		SPINWAIT((brcmf_sdiod_regrl(sdiodev,
-					    CORE_SB(base, sbtmstatehigh),
-					    NULL) &
-			  SSB_TMSHIGH_BUSY), 100000);
-
-		regdata = brcmf_sdiod_regrl(sdiodev,
-					    CORE_SB(base, sbtmstatehigh),
-					    NULL);
-		if (regdata & SSB_TMSHIGH_BUSY)
-			brcmf_err("core state still busy\n");
-
-		regdata = brcmf_sdiod_regrl(sdiodev, CORE_SB(base, sbidlow),
-					    NULL);
-		if (regdata & SSB_IDLOW_INITIATOR) {
-			regdata = brcmf_sdiod_regrl(sdiodev,
-						    CORE_SB(base, sbimstate),
-						    NULL);
-			regdata |= SSB_IMSTATE_REJECT;
-			brcmf_sdiod_regwl(sdiodev, CORE_SB(base, sbimstate),
-					  regdata, NULL);
-			regdata = brcmf_sdiod_regrl(sdiodev,
-						    CORE_SB(base, sbimstate),
-						    NULL);
-			udelay(1);
-			SPINWAIT((brcmf_sdiod_regrl(sdiodev,
-						    CORE_SB(base, sbimstate),
-						    NULL) &
-				  SSB_IMSTATE_BUSY), 100000);
-		}
-
-		/* set reset and reject while enabling the clocks */
-		regdata = SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK |
-			  SSB_TMSLOW_REJECT | SSB_TMSLOW_RESET;
-		brcmf_sdiod_regwl(sdiodev, CORE_SB(base, sbtmstatelow),
-				  regdata, NULL);
-		regdata = brcmf_sdiod_regrl(sdiodev,
-					    CORE_SB(base, sbtmstatelow), NULL);
-		udelay(10);
-
-		/* clear the initiator reject bit */
-		regdata = brcmf_sdiod_regrl(sdiodev, CORE_SB(base, sbidlow),
-					    NULL);
-		if (regdata & SSB_IDLOW_INITIATOR) {
-			regdata = brcmf_sdiod_regrl(sdiodev,
-						    CORE_SB(base, sbimstate),
-						    NULL);
-			regdata &= ~SSB_IMSTATE_REJECT;
-			brcmf_sdiod_regwl(sdiodev, CORE_SB(base, sbimstate),
-					  regdata, NULL);
-		}
-	}
-
-	/* leave reset and reject asserted */
-	brcmf_sdiod_regwl(sdiodev, CORE_SB(base, sbtmstatelow),
-			  (SSB_TMSLOW_REJECT | SSB_TMSLOW_RESET), NULL);
-	udelay(1);
-}
-
-static void
-brcmf_sdio_ai_coredisable(struct brcmf_sdio_dev *sdiodev,
-			  struct brcmf_chip *ci, u16 coreid, u32 pre_resetbits,
-			  u32 in_resetbits)
-{
-	u8 idx;
-	u32 regdata;
-	u32 wrapbase;
-
-	idx = brcmf_sdio_chip_getinfidx(ci, coreid);
-	if (idx == BRCMF_MAX_CORENUM)
-		return;
-
-	wrapbase = ci->c_inf[idx].wrapbase;
-
-	/* if core is already in reset, just return */
-	regdata = brcmf_sdiod_regrl(sdiodev, wrapbase + BCMA_RESET_CTL, NULL);
-	if ((regdata & BCMA_RESET_CTL_RESET) != 0)
-		return;
-
-	/* configure reset */
-	brcmf_sdiod_regwl(sdiodev, wrapbase + BCMA_IOCTL, pre_resetbits |
-			  BCMA_IOCTL_FGC | BCMA_IOCTL_CLK, NULL);
-	regdata = brcmf_sdiod_regrl(sdiodev, wrapbase + BCMA_IOCTL, NULL);
-
-	/* put in reset */
-	brcmf_sdiod_regwl(sdiodev, wrapbase + BCMA_RESET_CTL,
-			  BCMA_RESET_CTL_RESET, NULL);
-	usleep_range(10, 20);
-
-	/* wait till reset is 1 */
-	SPINWAIT(brcmf_sdiod_regrl(sdiodev, wrapbase + BCMA_RESET_CTL, NULL) !=
-		 BCMA_RESET_CTL_RESET, 300);
-
-	/* post reset configure */
-	brcmf_sdiod_regwl(sdiodev, wrapbase + BCMA_IOCTL, pre_resetbits |
-			  BCMA_IOCTL_FGC | BCMA_IOCTL_CLK, NULL);
-	regdata = brcmf_sdiod_regrl(sdiodev, wrapbase + BCMA_IOCTL, NULL);
-}
-
-static void
-brcmf_sdio_sb_resetcore(struct brcmf_sdio_dev *sdiodev,
-			struct brcmf_chip *ci, u16 coreid,  u32 pre_resetbits,
-			u32 in_resetbits, u32 post_resetbits)
-{
-	u32 regdata;
-	u8 idx;
-
-	idx = brcmf_sdio_chip_getinfidx(ci, coreid);
-	if (idx == BRCMF_MAX_CORENUM)
-		return;
-
-	/*
-	 * Must do the disable sequence first to work for
-	 * arbitrary current core state.
-	 */
-	brcmf_sdio_sb_coredisable(sdiodev, ci, coreid, pre_resetbits,
-				  in_resetbits);
-
-	/*
-	 * Now do the initialization sequence.
-	 * set reset while enabling the clock and
-	 * forcing them on throughout the core
-	 */
-	brcmf_sdiod_regwl(sdiodev,
-			  CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
-			  SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK | SSB_TMSLOW_RESET,
-			  NULL);
-	regdata = brcmf_sdiod_regrl(sdiodev,
-				    CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
-				    NULL);
-	udelay(1);
-
-	/* clear any serror */
-	regdata = brcmf_sdiod_regrl(sdiodev,
-				    CORE_SB(ci->c_inf[idx].base, sbtmstatehigh),
-				    NULL);
-	if (regdata & SSB_TMSHIGH_SERR)
-		brcmf_sdiod_regwl(sdiodev,
-				  CORE_SB(ci->c_inf[idx].base, sbtmstatehigh),
-				  0, NULL);
-
-	regdata = brcmf_sdiod_regrl(sdiodev,
-				    CORE_SB(ci->c_inf[idx].base, sbimstate),
-				    NULL);
-	if (regdata & (SSB_IMSTATE_IBE | SSB_IMSTATE_TO))
-		brcmf_sdiod_regwl(sdiodev,
-				  CORE_SB(ci->c_inf[idx].base, sbimstate),
-				  regdata & ~(SSB_IMSTATE_IBE | SSB_IMSTATE_TO),
-				  NULL);
-
-	/* clear reset and allow it to propagate throughout the core */
-	brcmf_sdiod_regwl(sdiodev, CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
-			  SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK, NULL);
-	regdata = brcmf_sdiod_regrl(sdiodev,
-				    CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
-				    NULL);
-	udelay(1);
-
-	/* leave clock enabled */
-	brcmf_sdiod_regwl(sdiodev, CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
-			  SSB_TMSLOW_CLOCK, NULL);
-	regdata = brcmf_sdiod_regrl(sdiodev,
-				    CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
-				    NULL);
-	udelay(1);
-}
-
-static void
-brcmf_sdio_ai_resetcore(struct brcmf_sdio_dev *sdiodev,
-			struct brcmf_chip *ci, u16 coreid, u32 pre_resetbits,
-			u32 in_resetbits, u32 post_resetbits)
-{
-	u8 idx;
-	u32 regdata;
-	u32 wrapbase;
-
-	idx = brcmf_sdio_chip_getinfidx(ci, coreid);
-	if (idx == BRCMF_MAX_CORENUM)
-		return;
-
-	wrapbase = ci->c_inf[idx].wrapbase;
-
-	/* must disable first to work for arbitrary current core state */
-	brcmf_sdio_ai_coredisable(sdiodev, ci, coreid, pre_resetbits,
-				  in_resetbits);
-
-	while (brcmf_sdiod_regrl(sdiodev, wrapbase + BCMA_RESET_CTL, NULL) &
-	       BCMA_RESET_CTL_RESET) {
-		brcmf_sdiod_regwl(sdiodev, wrapbase + BCMA_RESET_CTL, 0, NULL);
-		usleep_range(40, 60);
-	}
-
-	brcmf_sdiod_regwl(sdiodev, wrapbase + BCMA_IOCTL, post_resetbits |
-			  BCMA_IOCTL_CLK, NULL);
-	regdata = brcmf_sdiod_regrl(sdiodev, wrapbase + BCMA_IOCTL, NULL);
-}
-
-#ifdef DEBUG
-/* safety check for chipinfo */
-static int brcmf_sdio_chip_cichk(struct brcmf_chip *ci)
-{
-	u8 core_idx;
-
-	/* check RAM core presence for ARM CM3 core */
-	core_idx = brcmf_sdio_chip_getinfidx(ci, BCMA_CORE_ARM_CM3);
-	if (BRCMF_MAX_CORENUM != core_idx) {
-		core_idx = brcmf_sdio_chip_getinfidx(ci,
-						     BCMA_CORE_INTERNAL_MEM);
-		if (BRCMF_MAX_CORENUM == core_idx) {
-			brcmf_err("RAM core not provided with ARM CM3 core\n");
-			return -ENODEV;
-		}
-	}
-
-	/* check RAM base for ARM CR4 core */
-	core_idx = brcmf_sdio_chip_getinfidx(ci, BCMA_CORE_ARM_CR4);
-	if (BRCMF_MAX_CORENUM != core_idx) {
-		if (ci->rambase == 0) {
-			brcmf_err("RAM base not provided with ARM CR4 core\n");
-			return -ENOMEM;
-		}
-	}
-
-	return 0;
-}
-#else	/* DEBUG */
-static inline int brcmf_sdio_chip_cichk(struct brcmf_chip *ci)
-{
-	return 0;
-}
-#endif
-
-static int brcmf_sdio_chip_recognition(struct brcmf_sdio_dev *sdiodev,
-				       struct brcmf_chip *ci)
-{
-	u32 regdata;
-	u32 socitype;
-
-	/* Get CC core rev
-	 * Chipid is assume to be at offset 0 from SI_ENUM_BASE
-	 * For different chiptypes or old sdio hosts w/o chipcommon,
-	 * other ways of recognition should be added here.
-	 */
-	regdata = brcmf_sdiod_regrl(sdiodev,
-				    CORE_CC_REG(SI_ENUM_BASE, chipid),
-				    NULL);
-	ci->chip = regdata & CID_ID_MASK;
-	ci->chiprev = (regdata & CID_REV_MASK) >> CID_REV_SHIFT;
-	if (sdiodev->func[0]->device == SDIO_DEVICE_ID_BROADCOM_4335_4339 &&
-	    ci->chiprev >= 2)
-		ci->chip = BCM4339_CHIP_ID;
-	socitype = (regdata & CID_TYPE_MASK) >> CID_TYPE_SHIFT;
-
-	brcmf_dbg(INFO, "found %s chip: id=0x%x, rev=%d\n",
-		  socitype == SOCI_SB ? "SB" : "AXI", ci->chip, ci->chiprev);
-
-	if (socitype == SOCI_SB) {
-		if (ci->chip != BCM4329_CHIP_ID) {
-			brcmf_err("SB chip is not supported\n");
-			return -ENODEV;
-		}
-		ci->iscoreup = brcmf_sdio_sb_iscoreup;
-		ci->corerev = brcmf_sdio_sb_corerev;
-		ci->coredisable = brcmf_sdio_sb_coredisable;
-		ci->resetcore = brcmf_sdio_sb_resetcore;
-
-		ci->c_inf[0].id = BCMA_CORE_CHIPCOMMON;
-		ci->c_inf[0].base = SI_ENUM_BASE;
-		ci->c_inf[1].id = BCMA_CORE_SDIO_DEV;
-		ci->c_inf[1].base = BCM4329_CORE_BUS_BASE;
-		ci->c_inf[2].id = BCMA_CORE_INTERNAL_MEM;
-		ci->c_inf[2].base = BCM4329_CORE_SOCRAM_BASE;
-		ci->c_inf[3].id = BCMA_CORE_ARM_CM3;
-		ci->c_inf[3].base = BCM4329_CORE_ARM_BASE;
-		ci->c_inf[4].id = BCMA_CORE_80211;
-		ci->c_inf[4].base = BCM43xx_CORE_D11_BASE;
-		ci->ramsize = BCM4329_RAMSIZE;
-	} else if (socitype == SOCI_AI) {
-		ci->iscoreup = brcmf_sdio_ai_iscoreup;
-		ci->corerev = brcmf_sdio_ai_corerev;
-		ci->coredisable = brcmf_sdio_ai_coredisable;
-		ci->resetcore = brcmf_sdio_ai_resetcore;
-
-		ci->c_inf[0].id = BCMA_CORE_CHIPCOMMON;
-		ci->c_inf[0].base = SI_ENUM_BASE;
-
-		/* Address of cores for new chips should be added here */
-		switch (ci->chip) {
-		case BCM43143_CHIP_ID:
-			ci->c_inf[0].wrapbase = ci->c_inf[0].base + 0x00100000;
-			ci->c_inf[0].cib = 0x2b000000;
-			ci->c_inf[1].id = BCMA_CORE_SDIO_DEV;
-			ci->c_inf[1].base = BCM43143_CORE_BUS_BASE;
-			ci->c_inf[1].wrapbase = ci->c_inf[1].base + 0x00100000;
-			ci->c_inf[1].cib = 0x18000000;
-			ci->c_inf[2].id = BCMA_CORE_INTERNAL_MEM;
-			ci->c_inf[2].base = BCM43143_CORE_SOCRAM_BASE;
-			ci->c_inf[2].wrapbase = ci->c_inf[2].base + 0x00100000;
-			ci->c_inf[2].cib = 0x14000000;
-			ci->c_inf[3].id = BCMA_CORE_ARM_CM3;
-			ci->c_inf[3].base = BCM43143_CORE_ARM_BASE;
-			ci->c_inf[3].wrapbase = ci->c_inf[3].base + 0x00100000;
-			ci->c_inf[3].cib = 0x07000000;
-			ci->c_inf[4].id = BCMA_CORE_80211;
-			ci->c_inf[4].base = BCM43xx_CORE_D11_BASE;
-			ci->c_inf[4].wrapbase = ci->c_inf[4].base + 0x00100000;
-			ci->ramsize = BCM43143_RAMSIZE;
-			break;
-		case BCM43241_CHIP_ID:
-			ci->c_inf[0].wrapbase = 0x18100000;
-			ci->c_inf[0].cib = 0x2a084411;
-			ci->c_inf[1].id = BCMA_CORE_SDIO_DEV;
-			ci->c_inf[1].base = 0x18002000;
-			ci->c_inf[1].wrapbase = 0x18102000;
-			ci->c_inf[1].cib = 0x0e004211;
-			ci->c_inf[2].id = BCMA_CORE_INTERNAL_MEM;
-			ci->c_inf[2].base = 0x18004000;
-			ci->c_inf[2].wrapbase = 0x18104000;
-			ci->c_inf[2].cib = 0x14080401;
-			ci->c_inf[3].id = BCMA_CORE_ARM_CM3;
-			ci->c_inf[3].base = 0x18003000;
-			ci->c_inf[3].wrapbase = 0x18103000;
-			ci->c_inf[3].cib = 0x07004211;
-			ci->c_inf[4].id = BCMA_CORE_80211;
-			ci->c_inf[4].base = BCM43xx_CORE_D11_BASE;
-			ci->c_inf[4].wrapbase = ci->c_inf[4].base + 0x00100000;
-			ci->ramsize = 0x90000;
-			break;
-		case BCM4330_CHIP_ID:
-			ci->c_inf[0].wrapbase = 0x18100000;
-			ci->c_inf[0].cib = 0x27004211;
-			ci->c_inf[1].id = BCMA_CORE_SDIO_DEV;
-			ci->c_inf[1].base = 0x18002000;
-			ci->c_inf[1].wrapbase = 0x18102000;
-			ci->c_inf[1].cib = 0x07004211;
-			ci->c_inf[2].id = BCMA_CORE_INTERNAL_MEM;
-			ci->c_inf[2].base = 0x18004000;
-			ci->c_inf[2].wrapbase = 0x18104000;
-			ci->c_inf[2].cib = 0x0d080401;
-			ci->c_inf[3].id = BCMA_CORE_ARM_CM3;
-			ci->c_inf[3].base = 0x18003000;
-			ci->c_inf[3].wrapbase = 0x18103000;
-			ci->c_inf[3].cib = 0x03004211;
-			ci->c_inf[4].id = BCMA_CORE_80211;
-			ci->c_inf[4].base = BCM43xx_CORE_D11_BASE;
-			ci->c_inf[4].wrapbase = ci->c_inf[4].base + 0x00100000;
-			ci->ramsize = 0x48000;
-			break;
-		case BCM4334_CHIP_ID:
-			ci->c_inf[0].wrapbase = 0x18100000;
-			ci->c_inf[0].cib = 0x29004211;
-			ci->c_inf[1].id = BCMA_CORE_SDIO_DEV;
-			ci->c_inf[1].base = 0x18002000;
-			ci->c_inf[1].wrapbase = 0x18102000;
-			ci->c_inf[1].cib = 0x0d004211;
-			ci->c_inf[2].id = BCMA_CORE_INTERNAL_MEM;
-			ci->c_inf[2].base = 0x18004000;
-			ci->c_inf[2].wrapbase = 0x18104000;
-			ci->c_inf[2].cib = 0x13080401;
-			ci->c_inf[3].id = BCMA_CORE_ARM_CM3;
-			ci->c_inf[3].base = 0x18003000;
-			ci->c_inf[3].wrapbase = 0x18103000;
-			ci->c_inf[3].cib = 0x07004211;
-			ci->c_inf[4].id = BCMA_CORE_80211;
-			ci->c_inf[4].base = BCM43xx_CORE_D11_BASE;
-			ci->c_inf[4].wrapbase = ci->c_inf[4].base + 0x00100000;
-			ci->ramsize = 0x80000;
-			break;
-		case BCM4335_CHIP_ID:
-			ci->c_inf[0].wrapbase = 0x18100000;
-			ci->c_inf[0].cib = 0x2b084411;
-			ci->c_inf[1].id = BCMA_CORE_SDIO_DEV;
-			ci->c_inf[1].base = 0x18005000;
-			ci->c_inf[1].wrapbase = 0x18105000;
-			ci->c_inf[1].cib = 0x0f004211;
-			ci->c_inf[2].id = BCMA_CORE_ARM_CR4;
-			ci->c_inf[2].base = 0x18002000;
-			ci->c_inf[2].wrapbase = 0x18102000;
-			ci->c_inf[2].cib = 0x01084411;
-			ci->c_inf[3].id = BCMA_CORE_80211;
-			ci->c_inf[3].base = BCM43xx_CORE_D11_BASE;
-			ci->c_inf[3].wrapbase = ci->c_inf[3].base + 0x00100000;
-			ci->ramsize = 0xc0000;
-			ci->rambase = 0x180000;
-			break;
-		case BCM43362_CHIP_ID:
-			ci->c_inf[0].wrapbase = 0x18100000;
-			ci->c_inf[0].cib = 0x27004211;
-			ci->c_inf[1].id = BCMA_CORE_SDIO_DEV;
-			ci->c_inf[1].base = 0x18002000;
-			ci->c_inf[1].wrapbase = 0x18102000;
-			ci->c_inf[1].cib = 0x0a004211;
-			ci->c_inf[2].id = BCMA_CORE_INTERNAL_MEM;
-			ci->c_inf[2].base = 0x18004000;
-			ci->c_inf[2].wrapbase = 0x18104000;
-			ci->c_inf[2].cib = 0x08080401;
-			ci->c_inf[3].id = BCMA_CORE_ARM_CM3;
-			ci->c_inf[3].base = 0x18003000;
-			ci->c_inf[3].wrapbase = 0x18103000;
-			ci->c_inf[3].cib = 0x03004211;
-			ci->c_inf[4].id = BCMA_CORE_80211;
-			ci->c_inf[4].base = BCM43xx_CORE_D11_BASE;
-			ci->c_inf[4].wrapbase = ci->c_inf[4].base + 0x00100000;
-			ci->ramsize = 0x3C000;
-			break;
-		case BCM4339_CHIP_ID:
-			ci->c_inf[0].wrapbase = 0x18100000;
-			ci->c_inf[0].cib = 0x2e084411;
-			ci->c_inf[1].id = BCMA_CORE_SDIO_DEV;
-			ci->c_inf[1].base = 0x18005000;
-			ci->c_inf[1].wrapbase = 0x18105000;
-			ci->c_inf[1].cib = 0x15004211;
-			ci->c_inf[2].id = BCMA_CORE_ARM_CR4;
-			ci->c_inf[2].base = 0x18002000;
-			ci->c_inf[2].wrapbase = 0x18102000;
-			ci->c_inf[2].cib = 0x04084411;
-			ci->c_inf[3].id = BCMA_CORE_80211;
-			ci->c_inf[3].base = BCM43xx_CORE_D11_BASE;
-			ci->c_inf[3].wrapbase = ci->c_inf[3].base + 0x00100000;
-			ci->ramsize = 0xc0000;
-			ci->rambase = 0x180000;
-			break;
-		default:
-			brcmf_err("AXI chip is not supported\n");
-			return -ENODEV;
-		}
-	} else {
-		brcmf_err("chip backplane type %u is not supported\n",
-			  socitype);
-		return -ENODEV;
-	}
-
-	return brcmf_sdio_chip_cichk(ci);
-}
-
-static void
-brcmf_sdio_chip_buscoresetup(struct brcmf_sdio_dev *sdiodev,
-			     struct brcmf_chip *ci)
-{
-	u32 base = ci->c_inf[0].base;
-
-	/* get chipcommon rev */
-	ci->c_inf[0].rev = ci->corerev(sdiodev, ci, ci->c_inf[0].id);
-
-	/* get chipcommon capabilites */
-	ci->c_inf[0].caps = brcmf_sdiod_regrl(sdiodev,
-					      CORE_CC_REG(base, capabilities),
-					      NULL);
-
-	/* get pmu caps & rev */
-	if (ci->c_inf[0].caps & CC_CAP_PMU) {
-		ci->pmucaps =
-			brcmf_sdiod_regrl(sdiodev,
-					  CORE_CC_REG(base, pmucapabilities),
-					  NULL);
-		ci->pmurev = ci->pmucaps & PCAP_REV_MASK;
-	}
-
-	ci->c_inf[1].rev = ci->corerev(sdiodev, ci, ci->c_inf[1].id);
-
-	brcmf_dbg(INFO, "ccrev=%d, pmurev=%d, buscore rev/type=%d/0x%x\n",
-		  ci->c_inf[0].rev, ci->pmurev,
-		  ci->c_inf[1].rev, ci->c_inf[1].id);
-
-	/*
-	 * Make sure any on-chip ARM is off (in case strapping is wrong),
-	 * or downloaded code was already running.
-	 */
-	ci->coredisable(sdiodev, ci, BCMA_CORE_ARM_CM3, 0, 0);
-}
-
-int brcmf_sdio_chip_attach(struct brcmf_sdio_dev *sdiodev,
-			   struct brcmf_chip **ci_ptr)
-{
-	int ret;
-	struct brcmf_chip *ci;
-
-	brcmf_dbg(TRACE, "Enter\n");
-
-	ci = kzalloc(sizeof(*ci), GFP_ATOMIC);
-	if (!ci)
-		return -ENOMEM;
-
-	ret = brcmf_sdio_buscoreprep(sdiodev);
-	if (ret != 0)
-		goto err;
-
-	ret = brcmf_sdio_chip_recognition(sdiodev, ci);
-	if (ret != 0)
-		goto err;
-
-	brcmf_sdio_chip_buscoresetup(sdiodev, ci);
-
-	brcmf_sdiod_regwl(sdiodev, CORE_CC_REG(ci->c_inf[0].base, gpiopullup),
-			  0, NULL);
-	brcmf_sdiod_regwl(sdiodev, CORE_CC_REG(ci->c_inf[0].base, gpiopulldown),
-			  0, NULL);
-
-	*ci_ptr = ci;
-	return 0;
-
-err:
-	kfree(ci);
-	return ret;
-}
-
-void
-brcmf_sdio_chip_detach(struct brcmf_chip **ci_ptr)
-{
-	brcmf_dbg(TRACE, "Enter\n");
-
-	kfree(*ci_ptr);
-	*ci_ptr = NULL;
-}
-
-static void
-brcmf_sdio_chip_cm3_enterdl(struct brcmf_sdio_dev *sdiodev,
-			    struct brcmf_chip *ci)
-{
-	ci->coredisable(sdiodev, ci, BCMA_CORE_ARM_CM3, 0, 0);
-	ci->resetcore(sdiodev, ci, BCMA_CORE_80211,
-		      D11_BCMA_IOCTL_PHYRESET | D11_BCMA_IOCTL_PHYCLOCKEN,
-		      D11_BCMA_IOCTL_PHYCLOCKEN, D11_BCMA_IOCTL_PHYCLOCKEN);
-	ci->resetcore(sdiodev, ci, BCMA_CORE_INTERNAL_MEM, 0, 0, 0);
-}
-
-static bool brcmf_sdio_chip_cm3_exitdl(struct brcmf_sdio_dev *sdiodev,
-				       struct brcmf_chip *ci)
-{
-	u8 core_idx;
-	u32 reg_addr;
-
-	if (!ci->iscoreup(sdiodev, ci, BCMA_CORE_INTERNAL_MEM)) {
-		brcmf_err("SOCRAM core is down after reset?\n");
-		return false;
-	}
-
-	/* clear all interrupts */
-	core_idx = brcmf_sdio_chip_getinfidx(ci, BCMA_CORE_SDIO_DEV);
-	reg_addr = ci->c_inf[core_idx].base;
-	reg_addr += offsetof(struct sdpcmd_regs, intstatus);
-	brcmf_sdiod_regwl(sdiodev, reg_addr, 0xFFFFFFFF, NULL);
-
-	ci->resetcore(sdiodev, ci, BCMA_CORE_ARM_CM3, 0, 0, 0);
-
-	return true;
-}
-
-static inline void
-brcmf_sdio_chip_cr4_enterdl(struct brcmf_sdio_dev *sdiodev,
-			    struct brcmf_chip *ci)
-{
-	u8 idx;
-	u32 regdata;
-	u32 wrapbase;
-	idx = brcmf_sdio_chip_getinfidx(ci, BCMA_CORE_ARM_CR4);
-
-	if (idx == BRCMF_MAX_CORENUM)
-		return;
-
-	wrapbase = ci->c_inf[idx].wrapbase;
-	regdata = brcmf_sdiod_regrl(sdiodev, wrapbase + BCMA_IOCTL, NULL);
-	regdata &= ARMCR4_BCMA_IOCTL_CPUHALT;
-	ci->resetcore(sdiodev, ci, BCMA_CORE_ARM_CR4, regdata,
-		      ARMCR4_BCMA_IOCTL_CPUHALT, ARMCR4_BCMA_IOCTL_CPUHALT);
-	ci->resetcore(sdiodev, ci, BCMA_CORE_80211,
-		      D11_BCMA_IOCTL_PHYRESET | D11_BCMA_IOCTL_PHYCLOCKEN,
-		      D11_BCMA_IOCTL_PHYCLOCKEN, D11_BCMA_IOCTL_PHYCLOCKEN);
-}
-
-static bool brcmf_sdio_chip_cr4_exitdl(struct brcmf_sdio_dev *sdiodev,
-				       struct brcmf_chip *ci, u32 rstvec)
-{
-	u8 core_idx;
-	u32 reg_addr;
-
-	/* clear all interrupts */
-	core_idx = brcmf_sdio_chip_getinfidx(ci, BCMA_CORE_SDIO_DEV);
-	reg_addr = ci->c_inf[core_idx].base;
-	reg_addr += offsetof(struct sdpcmd_regs, intstatus);
-	brcmf_sdiod_regwl(sdiodev, reg_addr, 0xFFFFFFFF, NULL);
-
-	/* Write reset vector to address 0 */
-	brcmf_sdiod_ramrw(sdiodev, true, 0, (void *)&rstvec,
-			  sizeof(rstvec));
-
-	/* restore ARM */
-	ci->resetcore(sdiodev, ci, BCMA_CORE_ARM_CR4, ARMCR4_BCMA_IOCTL_CPUHALT,
-		      0, 0);
-
-	return true;
-}
-
-void brcmf_sdio_chip_enter_download(struct brcmf_sdio_dev *sdiodev,
-				    struct brcmf_chip *ci)
-{
-	u8 arm_core_idx;
-
-	arm_core_idx = brcmf_sdio_chip_getinfidx(ci, BCMA_CORE_ARM_CM3);
-	if (BRCMF_MAX_CORENUM != arm_core_idx) {
-		brcmf_sdio_chip_cm3_enterdl(sdiodev, ci);
-		return;
-	}
-
-	brcmf_sdio_chip_cr4_enterdl(sdiodev, ci);
-}
-
-bool brcmf_sdio_chip_exit_download(struct brcmf_sdio_dev *sdiodev,
-				   struct brcmf_chip *ci, u32 rstvec)
-{
-	u8 arm_core_idx;
-
-	arm_core_idx = brcmf_sdio_chip_getinfidx(ci, BCMA_CORE_ARM_CM3);
-	if (BRCMF_MAX_CORENUM != arm_core_idx)
-		return brcmf_sdio_chip_cm3_exitdl(sdiodev, ci);
-
-	return brcmf_sdio_chip_cr4_exitdl(sdiodev, ci, rstvec);
-}
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.h b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.h
deleted file mode 100644
index 2bc00c5d1a7f..000000000000
--- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.h
+++ /dev/null
@@ -1,228 +0,0 @@
-/*
- * Copyright (c) 2011 Broadcom Corporation
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
- * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
- * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#ifndef _BRCMFMAC_SDIO_CHIP_H_
-#define _BRCMFMAC_SDIO_CHIP_H_
-
-/*
- * Core reg address translation.
- * Both macro's returns a 32 bits byte address on the backplane bus.
- */
-#define CORE_CC_REG(base, field) \
-		(base + offsetof(struct chipcregs, field))
-#define CORE_BUS_REG(base, field) \
-		(base + offsetof(struct sdpcmd_regs, field))
-#define CORE_SB(base, field) \
-		(base + SBCONFIGOFF + offsetof(struct sbconfig, field))
-
-/* SDIO function 1 register CHIPCLKCSR */
-/* Force ALP request to backplane */
-#define SBSDIO_FORCE_ALP		0x01
-/* Force HT request to backplane */
-#define SBSDIO_FORCE_HT			0x02
-/* Force ILP request to backplane */
-#define SBSDIO_FORCE_ILP		0x04
-/* Make ALP ready (power up xtal) */
-#define SBSDIO_ALP_AVAIL_REQ		0x08
-/* Make HT ready (power up PLL) */
-#define SBSDIO_HT_AVAIL_REQ		0x10
-/* Squelch clock requests from HW */
-#define SBSDIO_FORCE_HW_CLKREQ_OFF	0x20
-/* Status: ALP is ready */
-#define SBSDIO_ALP_AVAIL		0x40
-/* Status: HT is ready */
-#define SBSDIO_HT_AVAIL			0x80
-#define SBSDIO_AVBITS		(SBSDIO_HT_AVAIL | SBSDIO_ALP_AVAIL)
-#define SBSDIO_ALPAV(regval)	((regval) & SBSDIO_AVBITS)
-#define SBSDIO_HTAV(regval)	(((regval) & SBSDIO_AVBITS) == SBSDIO_AVBITS)
-#define SBSDIO_ALPONLY(regval)	(SBSDIO_ALPAV(regval) && !SBSDIO_HTAV(regval))
-#define SBSDIO_CLKAV(regval, alponly) \
-	(SBSDIO_ALPAV(regval) && (alponly ? 1 : SBSDIO_HTAV(regval)))
-
-#define BRCMF_MAX_CORENUM	6
-
-struct brcmf_core {
-	u16 id;
-	u16 rev;
-	u32 base;
-	u32 wrapbase;
-	u32 caps;
-	u32 cib;
-};
-
-struct brcmf_chip {
-	u32 chip;
-	u32 chiprev;
-	/* core info */
-	/* always put chipcommon core at 0, bus core at 1 */
-	struct brcmf_core c_inf[BRCMF_MAX_CORENUM];
-	u32 pmurev;
-	u32 pmucaps;
-	u32 ramsize;
-	u32 rambase;
-	u32 rst_vec;	/* reset vertor for ARM CR4 core */
-
-	bool (*iscoreup)(struct brcmf_sdio_dev *sdiodev, struct brcmf_chip *ci,
-			 u16 coreid);
-	u32 (*corerev)(struct brcmf_sdio_dev *sdiodev, struct brcmf_chip *ci,
-			 u16 coreid);
-	void (*coredisable)(struct brcmf_sdio_dev *sdiodev,
-			struct brcmf_chip *ci, u16 coreid, u32 pre_resetbits,
-			u32 in_resetbits);
-	void (*resetcore)(struct brcmf_sdio_dev *sdiodev,
-			struct brcmf_chip *ci, u16 coreid, u32 pre_resetbits,
-			u32 in_resetbits, u32 post_resetbits);
-};
-
-struct sbconfig {
-	u32 PAD[2];
-	u32 sbipsflag;	/* initiator port ocp slave flag */
-	u32 PAD[3];
-	u32 sbtpsflag;	/* target port ocp slave flag */
-	u32 PAD[11];
-	u32 sbtmerrloga;	/* (sonics >= 2.3) */
-	u32 PAD;
-	u32 sbtmerrlog;	/* (sonics >= 2.3) */
-	u32 PAD[3];
-	u32 sbadmatch3;	/* address match3 */
-	u32 PAD;
-	u32 sbadmatch2;	/* address match2 */
-	u32 PAD;
-	u32 sbadmatch1;	/* address match1 */
-	u32 PAD[7];
-	u32 sbimstate;	/* initiator agent state */
-	u32 sbintvec;	/* interrupt mask */
-	u32 sbtmstatelow;	/* target state */
-	u32 sbtmstatehigh;	/* target state */
-	u32 sbbwa0;		/* bandwidth allocation table0 */
-	u32 PAD;
-	u32 sbimconfiglow;	/* initiator configuration */
-	u32 sbimconfighigh;	/* initiator configuration */
-	u32 sbadmatch0;	/* address match0 */
-	u32 PAD;
-	u32 sbtmconfiglow;	/* target configuration */
-	u32 sbtmconfighigh;	/* target configuration */
-	u32 sbbconfig;	/* broadcast configuration */
-	u32 PAD;
-	u32 sbbstate;	/* broadcast state */
-	u32 PAD[3];
-	u32 sbactcnfg;	/* activate configuration */
-	u32 PAD[3];
-	u32 sbflagst;	/* current sbflags */
-	u32 PAD[3];
-	u32 sbidlow;		/* identification */
-	u32 sbidhigh;	/* identification */
-};
-
-/* sdio core registers */
-struct sdpcmd_regs {
-	u32 corecontrol;		/* 0x00, rev8 */
-	u32 corestatus;			/* rev8 */
-	u32 PAD[1];
-	u32 biststatus;			/* rev8 */
-
-	/* PCMCIA access */
-	u16 pcmciamesportaladdr;	/* 0x010, rev8 */
-	u16 PAD[1];
-	u16 pcmciamesportalmask;	/* rev8 */
-	u16 PAD[1];
-	u16 pcmciawrframebc;		/* rev8 */
-	u16 PAD[1];
-	u16 pcmciaunderflowtimer;	/* rev8 */
-	u16 PAD[1];
-
-	/* interrupt */
-	u32 intstatus;			/* 0x020, rev8 */
-	u32 hostintmask;		/* rev8 */
-	u32 intmask;			/* rev8 */
-	u32 sbintstatus;		/* rev8 */
-	u32 sbintmask;			/* rev8 */
-	u32 funcintmask;		/* rev4 */
-	u32 PAD[2];
-	u32 tosbmailbox;		/* 0x040, rev8 */
-	u32 tohostmailbox;		/* rev8 */
-	u32 tosbmailboxdata;		/* rev8 */
-	u32 tohostmailboxdata;		/* rev8 */
-
-	/* synchronized access to registers in SDIO clock domain */
-	u32 sdioaccess;			/* 0x050, rev8 */
-	u32 PAD[3];
-
-	/* PCMCIA frame control */
-	u8 pcmciaframectrl;		/* 0x060, rev8 */
-	u8 PAD[3];
-	u8 pcmciawatermark;		/* rev8 */
-	u8 PAD[155];
-
-	/* interrupt batching control */
-	u32 intrcvlazy;			/* 0x100, rev8 */
-	u32 PAD[3];
-
-	/* counters */
-	u32 cmd52rd;			/* 0x110, rev8 */
-	u32 cmd52wr;			/* rev8 */
-	u32 cmd53rd;			/* rev8 */
-	u32 cmd53wr;			/* rev8 */
-	u32 abort;			/* rev8 */
-	u32 datacrcerror;		/* rev8 */
-	u32 rdoutofsync;		/* rev8 */
-	u32 wroutofsync;		/* rev8 */
-	u32 writebusy;			/* rev8 */
-	u32 readwait;			/* rev8 */
-	u32 readterm;			/* rev8 */
-	u32 writeterm;			/* rev8 */
-	u32 PAD[40];
-	u32 clockctlstatus;		/* rev8 */
-	u32 PAD[7];
-
-	u32 PAD[128];			/* DMA engines */
-
-	/* SDIO/PCMCIA CIS region */
-	char cis[512];			/* 0x400-0x5ff, rev6 */
-
-	/* PCMCIA function control registers */
-	char pcmciafcr[256];		/* 0x600-6ff, rev6 */
-	u16 PAD[55];
-
-	/* PCMCIA backplane access */
-	u16 backplanecsr;		/* 0x76E, rev6 */
-	u16 backplaneaddr0;		/* rev6 */
-	u16 backplaneaddr1;		/* rev6 */
-	u16 backplaneaddr2;		/* rev6 */
-	u16 backplaneaddr3;		/* rev6 */
-	u16 backplanedata0;		/* rev6 */
-	u16 backplanedata1;		/* rev6 */
-	u16 backplanedata2;		/* rev6 */
-	u16 backplanedata3;		/* rev6 */
-	u16 PAD[31];
-
-	/* sprom "size" & "blank" info */
-	u16 spromstatus;		/* 0x7BE, rev2 */
-	u32 PAD[464];
-
-	u16 PAD[0x80];
-};
-
-int brcmf_sdio_chip_attach(struct brcmf_sdio_dev *sdiodev,
-			   struct brcmf_chip **ci_ptr);
-void brcmf_sdio_chip_detach(struct brcmf_chip **ci_ptr);
-u8 brcmf_sdio_chip_getinfidx(struct brcmf_chip *ci, u16 coreid);
-void brcmf_sdio_chip_enter_download(struct brcmf_sdio_dev *sdiodev,
-				    struct brcmf_chip *ci);
-bool brcmf_sdio_chip_exit_download(struct brcmf_sdio_dev *sdiodev,
-				   struct brcmf_chip *ci, u32 rstvec);
-
-#endif		/* _BRCMFMAC_SDIO_CHIP_H_ */
-- 
cgit v1.2.2


From 79c868e5ada93601c8107a6d08fbb1e0d9348b94 Mon Sep 17 00:00:00 2001
From: Hante Meuleman <meuleman@broadcom.com>
Date: Wed, 29 Jan 2014 15:32:16 +0100
Subject: brcmfmac: fix sdio sending of large buffers.

the function brcmf_sdiod_ramrw is supposed to be able to send
large blobs of data. However inside the loop the skb->len field
did not correctly get reset each round. As a result only small
blobs could be sent. This patch fixes this problem.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
index 5711fd6f551a..07e7d2520257 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
@@ -826,7 +826,7 @@ brcmf_sdiod_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
 		}
 		if (!write)
 			memcpy(data, pkt->data, dsize);
-		skb_trim(pkt, dsize);
+		skb_trim(pkt, 0);
 
 		/* Adjust for next transfer (if any) */
 		size -= dsize;
-- 
cgit v1.2.2


From f9951c13349ac1553ab1e0962dc3f877e4841037 Mon Sep 17 00:00:00 2001
From: Hante Meuleman <meuleman@broadcom.com>
Date: Wed, 29 Jan 2014 15:32:17 +0100
Subject: brcmfmac: simplify sdio code download routine.

brcmf_sdio_download_code_file is using a loop to send small blobs
of data. This is unnecessarily complex and was simplified with this
patch.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 31 ++++++----------------
 1 file changed, 8 insertions(+), 23 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index d78fffb43964..be2ec8a55e76 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -3291,32 +3291,17 @@ static int brcmf_sdio_download_code_file(struct brcmf_sdio *bus,
 					 const struct firmware *fw)
 {
 	int err;
-	int offset;
-	int address;
-	int len;
 
 	brcmf_dbg(TRACE, "Enter\n");
 
-	err = 0;
-	offset = 0;
-	address = bus->ci->rambase;
-	while (offset < fw->size) {
-		len = ((offset + MEMBLOCK) < fw->size) ? MEMBLOCK :
-		      fw->size - offset;
-		err = brcmf_sdiod_ramrw(bus->sdiodev, true, address,
-					(u8 *)&fw->data[offset], len);
-		if (err) {
-			brcmf_err("error %d on writing %d membytes at 0x%08x\n",
-				  err, len, address);
-			return err;
-		}
-		offset += len;
-		address += len;
-	}
-	if (!err)
-		if (!brcmf_sdio_verifymemory(bus->sdiodev, bus->ci->rambase,
-					     (u8 *)fw->data, fw->size))
-			err = -EIO;
+	err = brcmf_sdiod_ramrw(bus->sdiodev, true, bus->ci->rambase,
+				(u8 *)fw->data, fw->size);
+	if (err)
+		brcmf_err("error %d on writing %d membytes at 0x%08x\n",
+			  err, (int)fw->size, bus->ci->rambase);
+	else if (!brcmf_sdio_verifymemory(bus->sdiodev, bus->ci->rambase,
+					  (u8 *)fw->data, fw->size))
+		err = -EIO;
 
 	return err;
 }
-- 
cgit v1.2.2


From e0c180ecf181aa157df28313c82d3b7449b5df65 Mon Sep 17 00:00:00 2001
From: Hante Meuleman <meuleman@broadcom.com>
Date: Wed, 29 Jan 2014 15:32:18 +0100
Subject: brcmfmac: on sdio remove first detach bus then stop worker.

Currently the function sdio_remove will first destroy the datawork
workqueue and then detach the bus. This can create the situation
where work gets added on non-existing work queue resulting in panic.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index be2ec8a55e76..098185442085 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -4205,14 +4205,14 @@ void brcmf_sdio_remove(struct brcmf_sdio *bus)
 		/* De-register interrupt handler */
 		brcmf_sdiod_intr_unregister(bus->sdiodev);
 
-		cancel_work_sync(&bus->datawork);
-		if (bus->brcmf_wq)
-			destroy_workqueue(bus->brcmf_wq);
-
 		if (bus->sdiodev->bus_if->drvr) {
 			brcmf_detach(bus->sdiodev->dev);
 		}
 
+		cancel_work_sync(&bus->datawork);
+		if (bus->brcmf_wq)
+			destroy_workqueue(bus->brcmf_wq);
+
 		if (bus->ci) {
 			if (bus->sdiodev->bus_if->state == BRCMF_BUS_DOWN) {
 				sdio_claim_host(bus->sdiodev->func[1]);
-- 
cgit v1.2.2


From cb7cf7be9eba76f3cd6258906074c72084570c84 Mon Sep 17 00:00:00 2001
From: Arend van Spriel <arend@broadcom.com>
Date: Wed, 29 Jan 2014 15:32:19 +0100
Subject: brcmfmac: make chip related functions host interface independent

This patch make several chip related functions host interface
independent by defining callback interface struct brcmf_buscore_ops.

Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/chip.c     | 1150 +++++++++++---------
 drivers/net/wireless/brcm80211/brcmfmac/chip.h     |  259 ++---
 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c |  200 ++--
 .../net/wireless/brcm80211/brcmfmac/sdio_host.h    |   90 +-
 4 files changed, 900 insertions(+), 799 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/chip.c b/drivers/net/wireless/brcm80211/brcmfmac/chip.c
index 37fd44a3483a..151a67110ecf 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/chip.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2011 Broadcom Corporation
+ * Copyright (c) 2014 Broadcom Corporation
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -13,25 +13,36 @@
  * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
  * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
-/* ***** SDIO interface chip backplane handle functions ***** */
-
-#include <linux/types.h>
-#include <linux/netdevice.h>
-#include <linux/mmc/card.h>
-#include <linux/mmc/sdio_func.h>
-#include <linux/mmc/sdio_ids.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/list.h>
 #include <linux/ssb/ssb_regs.h>
 #include <linux/bcma/bcma.h>
+#include <linux/bcma/bcma_regs.h>
 
-#include <chipcommon.h>
+#include <defs.h>
+#include <soc.h>
 #include <brcm_hw_ids.h>
-#include <brcmu_wifi.h>
 #include <brcmu_utils.h>
-#include <soc.h>
+#include <chipcommon.h>
 #include "dhd_dbg.h"
-#include "sdio_host.h"
 #include "chip.h"
 
+/* SOC Interconnect types (aka chip types) */
+#define SOCI_SB		0
+#define SOCI_AI		1
+
+/* EROM CompIdentB */
+#define CIB_REV_MASK		0xff000000
+#define CIB_REV_SHIFT		24
+
+/* ARM CR4 core specific control flag bits */
+#define ARMCR4_BCMA_IOCTL_CPUHALT	0x0020
+
+/* D11 core specific control flag bits */
+#define D11_BCMA_IOCTL_PHYCLOCKEN	0x0004
+#define D11_BCMA_IOCTL_PHYRESET		0x0008
+
 /* chip core base & ramsize */
 /* bcm4329 */
 /* SDIO device core, ID 0x829 */
@@ -51,20 +62,58 @@
 #define BCM43143_CORE_ARM_BASE		0x18003000
 #define BCM43143_RAMSIZE		0x70000
 
-/* All D11 cores, ID 0x812 */
-#define BCM43xx_CORE_D11_BASE		0x18001000
-
+#define CORE_SB(base, field) \
+		(base + SBCONFIGOFF + offsetof(struct sbconfig, field))
 #define	SBCOREREV(sbidh) \
 	((((sbidh) & SSB_IDHIGH_RCHI) >> SSB_IDHIGH_RCHI_SHIFT) | \
 	  ((sbidh) & SSB_IDHIGH_RCLO))
 
-/* SOC Interconnect types (aka chip types) */
-#define SOCI_SB		0
-#define SOCI_AI		1
-
-/* EROM CompIdentB */
-#define CIB_REV_MASK		0xff000000
-#define CIB_REV_SHIFT		24
+struct sbconfig {
+	u32 PAD[2];
+	u32 sbipsflag;	/* initiator port ocp slave flag */
+	u32 PAD[3];
+	u32 sbtpsflag;	/* target port ocp slave flag */
+	u32 PAD[11];
+	u32 sbtmerrloga;	/* (sonics >= 2.3) */
+	u32 PAD;
+	u32 sbtmerrlog;	/* (sonics >= 2.3) */
+	u32 PAD[3];
+	u32 sbadmatch3;	/* address match3 */
+	u32 PAD;
+	u32 sbadmatch2;	/* address match2 */
+	u32 PAD;
+	u32 sbadmatch1;	/* address match1 */
+	u32 PAD[7];
+	u32 sbimstate;	/* initiator agent state */
+	u32 sbintvec;	/* interrupt mask */
+	u32 sbtmstatelow;	/* target state */
+	u32 sbtmstatehigh;	/* target state */
+	u32 sbbwa0;		/* bandwidth allocation table0 */
+	u32 PAD;
+	u32 sbimconfiglow;	/* initiator configuration */
+	u32 sbimconfighigh;	/* initiator configuration */
+	u32 sbadmatch0;	/* address match0 */
+	u32 PAD;
+	u32 sbtmconfiglow;	/* target configuration */
+	u32 sbtmconfighigh;	/* target configuration */
+	u32 sbbconfig;	/* broadcast configuration */
+	u32 PAD;
+	u32 sbbstate;	/* broadcast state */
+	u32 PAD[3];
+	u32 sbactcnfg;	/* activate configuration */
+	u32 PAD[3];
+	u32 sbflagst;	/* current sbflags */
+	u32 PAD[3];
+	u32 sbidlow;		/* identification */
+	u32 sbidhigh;	/* identification */
+};
+
+struct brcmf_core_priv {
+	struct brcmf_core pub;
+	u32 wrapbase;
+	struct list_head list;
+	struct brcmf_chip_priv *chip;
+};
 
 /* ARM CR4 core specific control flag bits */
 #define ARMCR4_BCMA_IOCTL_CPUHALT	0x0020
@@ -73,350 +122,350 @@
 #define D11_BCMA_IOCTL_PHYCLOCKEN	0x0004
 #define D11_BCMA_IOCTL_PHYRESET		0x0008
 
-u8
-brcmf_sdio_chip_getinfidx(struct brcmf_chip *ci, u16 coreid)
-{
-	u8 idx;
-
-	for (idx = 0; idx < BRCMF_MAX_CORENUM; idx++)
-		if (coreid == ci->c_inf[idx].id)
-			return idx;
-
-	return BRCMF_MAX_CORENUM;
-}
-
-static u32
-brcmf_sdio_sb_corerev(struct brcmf_sdio_dev *sdiodev,
-		      struct brcmf_chip *ci, u16 coreid)
+struct brcmf_chip_priv {
+	struct brcmf_chip pub;
+	const struct brcmf_buscore_ops *ops;
+	void *ctx;
+	/* assured first core is chipcommon, second core is buscore */
+	struct list_head cores;
+	u16 num_cores;
+
+	bool (*iscoreup)(struct brcmf_core_priv *core);
+	void (*coredisable)(struct brcmf_core_priv *core, u32 prereset,
+			    u32 reset);
+	void (*resetcore)(struct brcmf_core_priv *core, u32 prereset, u32 reset,
+			  u32 postreset);
+};
+
+static void brcmf_chip_sb_corerev(struct brcmf_chip_priv *ci,
+				  struct brcmf_core *core)
 {
 	u32 regdata;
-	u8 idx;
 
-	idx = brcmf_sdio_chip_getinfidx(ci, coreid);
-
-	regdata = brcmf_sdiod_regrl(sdiodev,
-				    CORE_SB(ci->c_inf[idx].base, sbidhigh),
-				    NULL);
-	return SBCOREREV(regdata);
+	regdata = ci->ops->read32(ci->ctx, CORE_SB(core->base, sbidhigh));
+	core->rev = SBCOREREV(regdata);
 }
 
-static u32
-brcmf_sdio_ai_corerev(struct brcmf_sdio_dev *sdiodev,
-		      struct brcmf_chip *ci, u16 coreid)
-{
-	u8 idx;
-
-	idx = brcmf_sdio_chip_getinfidx(ci, coreid);
-
-	return (ci->c_inf[idx].cib & CIB_REV_MASK) >> CIB_REV_SHIFT;
-}
-
-static bool
-brcmf_sdio_sb_iscoreup(struct brcmf_sdio_dev *sdiodev,
-		       struct brcmf_chip *ci, u16 coreid)
+static bool brcmf_chip_sb_iscoreup(struct brcmf_core_priv *core)
 {
+	struct brcmf_chip_priv *ci;
 	u32 regdata;
-	u8 idx;
-
-	idx = brcmf_sdio_chip_getinfidx(ci, coreid);
-	if (idx == BRCMF_MAX_CORENUM)
-		return false;
+	u32 address;
 
-	regdata = brcmf_sdiod_regrl(sdiodev,
-				    CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
-				    NULL);
+	ci = core->chip;
+	address = CORE_SB(core->pub.base, sbtmstatelow);
+	regdata = ci->ops->read32(ci->ctx, address);
 	regdata &= (SSB_TMSLOW_RESET | SSB_TMSLOW_REJECT |
 		    SSB_IMSTATE_REJECT | SSB_TMSLOW_CLOCK);
 	return SSB_TMSLOW_CLOCK == regdata;
 }
 
-static bool
-brcmf_sdio_ai_iscoreup(struct brcmf_sdio_dev *sdiodev,
-		       struct brcmf_chip *ci, u16 coreid)
+static bool brcmf_chip_ai_iscoreup(struct brcmf_core_priv *core)
 {
+	struct brcmf_chip_priv *ci;
 	u32 regdata;
-	u8 idx;
 	bool ret;
 
-	idx = brcmf_sdio_chip_getinfidx(ci, coreid);
-	if (idx == BRCMF_MAX_CORENUM)
-		return false;
-
-	regdata = brcmf_sdiod_regrl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL,
-				    NULL);
+	ci = core->chip;
+	regdata = ci->ops->read32(ci->ctx, core->wrapbase + BCMA_IOCTL);
 	ret = (regdata & (BCMA_IOCTL_FGC | BCMA_IOCTL_CLK)) == BCMA_IOCTL_CLK;
 
-	regdata = brcmf_sdiod_regrl(sdiodev,
-				    ci->c_inf[idx].wrapbase+BCMA_RESET_CTL,
-				    NULL);
+	regdata = ci->ops->read32(ci->ctx, core->wrapbase + BCMA_RESET_CTL);
 	ret = ret && ((regdata & BCMA_RESET_CTL_RESET) == 0);
 
 	return ret;
 }
 
-static void
-brcmf_sdio_sb_coredisable(struct brcmf_sdio_dev *sdiodev,
-			  struct brcmf_chip *ci, u16 coreid, u32 pre_resetbits,
-			  u32 in_resetbits)
+static void brcmf_chip_sb_coredisable(struct brcmf_core_priv *core,
+				      u32 prereset, u32 reset)
 {
-	u32 regdata, base;
-	u8 idx;
+	struct brcmf_chip_priv *ci;
+	u32 val, base;
 
-	idx = brcmf_sdio_chip_getinfidx(ci, coreid);
-	base = ci->c_inf[idx].base;
-
-	regdata = brcmf_sdiod_regrl(sdiodev, CORE_SB(base, sbtmstatelow), NULL);
-	if (regdata & SSB_TMSLOW_RESET)
+	ci = core->chip;
+	base = core->pub.base;
+	val = ci->ops->read32(ci->ctx, CORE_SB(base, sbtmstatelow));
+	if (val & SSB_TMSLOW_RESET)
 		return;
 
-	regdata = brcmf_sdiod_regrl(sdiodev, CORE_SB(base, sbtmstatelow), NULL);
-	if ((regdata & SSB_TMSLOW_CLOCK) != 0) {
+	val = ci->ops->read32(ci->ctx, CORE_SB(base, sbtmstatelow));
+	if ((val & SSB_TMSLOW_CLOCK) != 0) {
 		/*
 		 * set target reject and spin until busy is clear
 		 * (preserve core-specific bits)
 		 */
-		regdata = brcmf_sdiod_regrl(sdiodev,
-					    CORE_SB(base, sbtmstatelow), NULL);
-		brcmf_sdiod_regwl(sdiodev, CORE_SB(base, sbtmstatelow),
-				  regdata | SSB_TMSLOW_REJECT, NULL);
+		val = ci->ops->read32(ci->ctx, CORE_SB(base, sbtmstatelow));
+		ci->ops->write32(ci->ctx, CORE_SB(base, sbtmstatelow),
+					 val | SSB_TMSLOW_REJECT);
 
-		regdata = brcmf_sdiod_regrl(sdiodev,
-					    CORE_SB(base, sbtmstatelow), NULL);
+		val = ci->ops->read32(ci->ctx, CORE_SB(base, sbtmstatelow));
 		udelay(1);
-		SPINWAIT((brcmf_sdiod_regrl(sdiodev,
-					    CORE_SB(base, sbtmstatehigh),
-					    NULL) &
-			  SSB_TMSHIGH_BUSY), 100000);
-
-		regdata = brcmf_sdiod_regrl(sdiodev,
-					    CORE_SB(base, sbtmstatehigh),
-					    NULL);
-		if (regdata & SSB_TMSHIGH_BUSY)
+		SPINWAIT((ci->ops->read32(ci->ctx, CORE_SB(base, sbtmstatehigh))
+			  & SSB_TMSHIGH_BUSY), 100000);
+
+		val = ci->ops->read32(ci->ctx, CORE_SB(base, sbtmstatehigh));
+		if (val & SSB_TMSHIGH_BUSY)
 			brcmf_err("core state still busy\n");
 
-		regdata = brcmf_sdiod_regrl(sdiodev, CORE_SB(base, sbidlow),
-					    NULL);
-		if (regdata & SSB_IDLOW_INITIATOR) {
-			regdata = brcmf_sdiod_regrl(sdiodev,
-						    CORE_SB(base, sbimstate),
-						    NULL);
-			regdata |= SSB_IMSTATE_REJECT;
-			brcmf_sdiod_regwl(sdiodev, CORE_SB(base, sbimstate),
-					  regdata, NULL);
-			regdata = brcmf_sdiod_regrl(sdiodev,
-						    CORE_SB(base, sbimstate),
-						    NULL);
+		val = ci->ops->read32(ci->ctx, CORE_SB(base, sbidlow));
+		if (val & SSB_IDLOW_INITIATOR) {
+			val = ci->ops->read32(ci->ctx,
+					      CORE_SB(base, sbimstate));
+			val |= SSB_IMSTATE_REJECT;
+			ci->ops->write32(ci->ctx,
+					 CORE_SB(base, sbimstate), val);
+			val = ci->ops->read32(ci->ctx,
+					      CORE_SB(base, sbimstate));
 			udelay(1);
-			SPINWAIT((brcmf_sdiod_regrl(sdiodev,
-						    CORE_SB(base, sbimstate),
-						    NULL) &
+			SPINWAIT((ci->ops->read32(ci->ctx,
+						  CORE_SB(base, sbimstate)) &
 				  SSB_IMSTATE_BUSY), 100000);
 		}
 
 		/* set reset and reject while enabling the clocks */
-		regdata = SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK |
-			  SSB_TMSLOW_REJECT | SSB_TMSLOW_RESET;
-		brcmf_sdiod_regwl(sdiodev, CORE_SB(base, sbtmstatelow),
-				  regdata, NULL);
-		regdata = brcmf_sdiod_regrl(sdiodev,
-					    CORE_SB(base, sbtmstatelow), NULL);
+		val = SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK |
+		      SSB_TMSLOW_REJECT | SSB_TMSLOW_RESET;
+		ci->ops->write32(ci->ctx, CORE_SB(base, sbtmstatelow), val);
+		val = ci->ops->read32(ci->ctx, CORE_SB(base, sbtmstatelow));
 		udelay(10);
 
 		/* clear the initiator reject bit */
-		regdata = brcmf_sdiod_regrl(sdiodev, CORE_SB(base, sbidlow),
-					    NULL);
-		if (regdata & SSB_IDLOW_INITIATOR) {
-			regdata = brcmf_sdiod_regrl(sdiodev,
-						    CORE_SB(base, sbimstate),
-						    NULL);
-			regdata &= ~SSB_IMSTATE_REJECT;
-			brcmf_sdiod_regwl(sdiodev, CORE_SB(base, sbimstate),
-					  regdata, NULL);
+		val = ci->ops->read32(ci->ctx, CORE_SB(base, sbidlow));
+		if (val & SSB_IDLOW_INITIATOR) {
+			val = ci->ops->read32(ci->ctx,
+					      CORE_SB(base, sbimstate));
+			val &= ~SSB_IMSTATE_REJECT;
+			ci->ops->write32(ci->ctx,
+					 CORE_SB(base, sbimstate), val);
 		}
 	}
 
 	/* leave reset and reject asserted */
-	brcmf_sdiod_regwl(sdiodev, CORE_SB(base, sbtmstatelow),
-			  (SSB_TMSLOW_REJECT | SSB_TMSLOW_RESET), NULL);
+	ci->ops->write32(ci->ctx, CORE_SB(base, sbtmstatelow),
+			 (SSB_TMSLOW_REJECT | SSB_TMSLOW_RESET));
 	udelay(1);
 }
 
-static void
-brcmf_sdio_ai_coredisable(struct brcmf_sdio_dev *sdiodev,
-			  struct brcmf_chip *ci, u16 coreid, u32 pre_resetbits,
-			  u32 in_resetbits)
+static void brcmf_chip_ai_coredisable(struct brcmf_core_priv *core,
+				      u32 prereset, u32 reset)
 {
-	u8 idx;
+	struct brcmf_chip_priv *ci;
 	u32 regdata;
-	u32 wrapbase;
-
-	idx = brcmf_sdio_chip_getinfidx(ci, coreid);
-	if (idx == BRCMF_MAX_CORENUM)
-		return;
 
-	wrapbase = ci->c_inf[idx].wrapbase;
+	ci = core->chip;
 
 	/* if core is already in reset, just return */
-	regdata = brcmf_sdiod_regrl(sdiodev, wrapbase + BCMA_RESET_CTL, NULL);
+	regdata = ci->ops->read32(ci->ctx, core->wrapbase + BCMA_RESET_CTL);
 	if ((regdata & BCMA_RESET_CTL_RESET) != 0)
 		return;
 
 	/* configure reset */
-	brcmf_sdiod_regwl(sdiodev, wrapbase + BCMA_IOCTL, pre_resetbits |
-			  BCMA_IOCTL_FGC | BCMA_IOCTL_CLK, NULL);
-	regdata = brcmf_sdiod_regrl(sdiodev, wrapbase + BCMA_IOCTL, NULL);
+	ci->ops->write32(ci->ctx, core->wrapbase + BCMA_IOCTL,
+			 prereset | BCMA_IOCTL_FGC | BCMA_IOCTL_CLK);
+	ci->ops->read32(ci->ctx, core->wrapbase + BCMA_IOCTL);
 
 	/* put in reset */
-	brcmf_sdiod_regwl(sdiodev, wrapbase + BCMA_RESET_CTL,
-			  BCMA_RESET_CTL_RESET, NULL);
+	ci->ops->write32(ci->ctx, core->wrapbase + BCMA_RESET_CTL,
+			 BCMA_RESET_CTL_RESET);
 	usleep_range(10, 20);
 
 	/* wait till reset is 1 */
-	SPINWAIT(brcmf_sdiod_regrl(sdiodev, wrapbase + BCMA_RESET_CTL, NULL) !=
+	SPINWAIT(ci->ops->read32(ci->ctx, core->wrapbase + BCMA_RESET_CTL) !=
 		 BCMA_RESET_CTL_RESET, 300);
 
-	/* post reset configure */
-	brcmf_sdiod_regwl(sdiodev, wrapbase + BCMA_IOCTL, pre_resetbits |
-			  BCMA_IOCTL_FGC | BCMA_IOCTL_CLK, NULL);
-	regdata = brcmf_sdiod_regrl(sdiodev, wrapbase + BCMA_IOCTL, NULL);
+	/* in-reset configure */
+	ci->ops->write32(ci->ctx, core->wrapbase + BCMA_IOCTL,
+			 reset | BCMA_IOCTL_FGC | BCMA_IOCTL_CLK);
+	ci->ops->read32(ci->ctx, core->wrapbase + BCMA_IOCTL);
 }
 
-static void
-brcmf_sdio_sb_resetcore(struct brcmf_sdio_dev *sdiodev,
-			struct brcmf_chip *ci, u16 coreid,  u32 pre_resetbits,
-			u32 in_resetbits, u32 post_resetbits)
+static void brcmf_chip_sb_resetcore(struct brcmf_core_priv *core, u32 prereset,
+				    u32 reset, u32 postreset)
 {
+	struct brcmf_chip_priv *ci;
 	u32 regdata;
-	u8 idx;
-
-	idx = brcmf_sdio_chip_getinfidx(ci, coreid);
-	if (idx == BRCMF_MAX_CORENUM)
-		return;
+	u32 base;
 
+	ci = core->chip;
+	base = core->pub.base;
 	/*
 	 * Must do the disable sequence first to work for
 	 * arbitrary current core state.
 	 */
-	brcmf_sdio_sb_coredisable(sdiodev, ci, coreid, pre_resetbits,
-				  in_resetbits);
+	brcmf_chip_sb_coredisable(core, 0, 0);
 
 	/*
 	 * Now do the initialization sequence.
 	 * set reset while enabling the clock and
 	 * forcing them on throughout the core
 	 */
-	brcmf_sdiod_regwl(sdiodev,
-			  CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
-			  SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK | SSB_TMSLOW_RESET,
-			  NULL);
-	regdata = brcmf_sdiod_regrl(sdiodev,
-				    CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
-				    NULL);
+	ci->ops->write32(ci->ctx, CORE_SB(base, sbtmstatelow),
+			 SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK |
+			 SSB_TMSLOW_RESET);
+	regdata = ci->ops->read32(ci->ctx, CORE_SB(base, sbtmstatelow));
 	udelay(1);
 
 	/* clear any serror */
-	regdata = brcmf_sdiod_regrl(sdiodev,
-				    CORE_SB(ci->c_inf[idx].base, sbtmstatehigh),
-				    NULL);
+	regdata = ci->ops->read32(ci->ctx, CORE_SB(base, sbtmstatehigh));
 	if (regdata & SSB_TMSHIGH_SERR)
-		brcmf_sdiod_regwl(sdiodev,
-				  CORE_SB(ci->c_inf[idx].base, sbtmstatehigh),
-				  0, NULL);
-
-	regdata = brcmf_sdiod_regrl(sdiodev,
-				    CORE_SB(ci->c_inf[idx].base, sbimstate),
-				    NULL);
-	if (regdata & (SSB_IMSTATE_IBE | SSB_IMSTATE_TO))
-		brcmf_sdiod_regwl(sdiodev,
-				  CORE_SB(ci->c_inf[idx].base, sbimstate),
-				  regdata & ~(SSB_IMSTATE_IBE | SSB_IMSTATE_TO),
-				  NULL);
+		ci->ops->write32(ci->ctx, CORE_SB(base, sbtmstatehigh), 0);
+
+	regdata = ci->ops->read32(ci->ctx, CORE_SB(base, sbimstate));
+	if (regdata & (SSB_IMSTATE_IBE | SSB_IMSTATE_TO)) {
+		regdata &= ~(SSB_IMSTATE_IBE | SSB_IMSTATE_TO);
+		ci->ops->write32(ci->ctx, CORE_SB(base, sbimstate), regdata);
+	}
 
 	/* clear reset and allow it to propagate throughout the core */
-	brcmf_sdiod_regwl(sdiodev, CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
-			  SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK, NULL);
-	regdata = brcmf_sdiod_regrl(sdiodev,
-				    CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
-				    NULL);
+	ci->ops->write32(ci->ctx, CORE_SB(base, sbtmstatelow),
+			 SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK);
+	regdata = ci->ops->read32(ci->ctx, CORE_SB(base, sbtmstatelow));
 	udelay(1);
 
 	/* leave clock enabled */
-	brcmf_sdiod_regwl(sdiodev, CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
-			  SSB_TMSLOW_CLOCK, NULL);
-	regdata = brcmf_sdiod_regrl(sdiodev,
-				    CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
-				    NULL);
+	ci->ops->write32(ci->ctx, CORE_SB(base, sbtmstatelow),
+			 SSB_TMSLOW_CLOCK);
+	regdata = ci->ops->read32(ci->ctx, CORE_SB(base, sbtmstatelow));
 	udelay(1);
 }
 
-static void
-brcmf_sdio_ai_resetcore(struct brcmf_sdio_dev *sdiodev,
-			struct brcmf_chip *ci, u16 coreid, u32 pre_resetbits,
-			u32 in_resetbits, u32 post_resetbits)
+static void brcmf_chip_ai_resetcore(struct brcmf_core_priv *core, u32 prereset,
+				    u32 reset, u32 postreset)
 {
-	u8 idx;
-	u32 regdata;
-	u32 wrapbase;
+	struct brcmf_chip_priv *ci;
+	int count;
 
-	idx = brcmf_sdio_chip_getinfidx(ci, coreid);
-	if (idx == BRCMF_MAX_CORENUM)
-		return;
-
-	wrapbase = ci->c_inf[idx].wrapbase;
+	ci = core->chip;
 
 	/* must disable first to work for arbitrary current core state */
-	brcmf_sdio_ai_coredisable(sdiodev, ci, coreid, pre_resetbits,
-				  in_resetbits);
+	brcmf_chip_ai_coredisable(core, prereset, reset);
 
-	while (brcmf_sdiod_regrl(sdiodev, wrapbase + BCMA_RESET_CTL, NULL) &
+	count = 0;
+	while (ci->ops->read32(ci->ctx, core->wrapbase + BCMA_RESET_CTL) &
 	       BCMA_RESET_CTL_RESET) {
-		brcmf_sdiod_regwl(sdiodev, wrapbase + BCMA_RESET_CTL, 0, NULL);
+		ci->ops->write32(ci->ctx, core->wrapbase + BCMA_RESET_CTL, 0);
+		count++;
+		if (count > 50)
+			break;
 		usleep_range(40, 60);
 	}
 
-	brcmf_sdiod_regwl(sdiodev, wrapbase + BCMA_IOCTL, post_resetbits |
-			  BCMA_IOCTL_CLK, NULL);
-	regdata = brcmf_sdiod_regrl(sdiodev, wrapbase + BCMA_IOCTL, NULL);
+	ci->ops->write32(ci->ctx, core->wrapbase + BCMA_IOCTL,
+			 postreset | BCMA_IOCTL_CLK);
+	ci->ops->read32(ci->ctx, core->wrapbase + BCMA_IOCTL);
+}
+
+static char *brcmf_chip_name(uint chipid, char *buf, uint len)
+{
+	const char *fmt;
+
+	fmt = ((chipid > 0xa000) || (chipid < 0x4000)) ? "%d" : "%x";
+	snprintf(buf, len, fmt, chipid);
+	return buf;
+}
+
+static struct brcmf_core *brcmf_chip_add_core(struct brcmf_chip_priv *ci,
+					      u16 coreid, u32 base,
+					      u32 wrapbase)
+{
+	struct brcmf_core_priv *core;
+
+	core = kzalloc(sizeof(*core), GFP_KERNEL);
+	if (!core)
+		return ERR_PTR(-ENOMEM);
+
+	core->pub.id = coreid;
+	core->pub.base = base;
+	core->chip = ci;
+	core->wrapbase = wrapbase;
+
+	list_add_tail(&core->list, &ci->cores);
+	return &core->pub;
 }
 
 #ifdef DEBUG
 /* safety check for chipinfo */
-static int brcmf_sdio_chip_cichk(struct brcmf_chip *ci)
+static int brcmf_chip_cores_check(struct brcmf_chip_priv *ci)
 {
-	u8 core_idx;
-
-	/* check RAM core presence for ARM CM3 core */
-	core_idx = brcmf_sdio_chip_getinfidx(ci, BCMA_CORE_ARM_CM3);
-	if (BRCMF_MAX_CORENUM != core_idx) {
-		core_idx = brcmf_sdio_chip_getinfidx(ci,
-						     BCMA_CORE_INTERNAL_MEM);
-		if (BRCMF_MAX_CORENUM == core_idx) {
-			brcmf_err("RAM core not provided with ARM CM3 core\n");
-			return -ENODEV;
+	struct brcmf_core_priv *core;
+	bool need_socram = false;
+	bool has_socram = false;
+	int idx = 1;
+
+	list_for_each_entry(core, &ci->cores, list) {
+		brcmf_dbg(INFO, " [%-2d] core 0x%x rev %-2d base 0x%08x\n",
+			  idx++, core->pub.id, core->pub.rev, core->pub.base);
+
+		switch (core->pub.id) {
+		case BCMA_CORE_ARM_CM3:
+			need_socram = true;
+			break;
+		case BCMA_CORE_INTERNAL_MEM:
+			has_socram = true;
+			break;
+		case BCMA_CORE_ARM_CR4:
+			if (ci->pub.rambase == 0) {
+				brcmf_err("RAM base not provided with ARM CR4 core\n");
+				return -ENOMEM;
+			}
+			break;
+		default:
+			break;
 		}
 	}
 
-	/* check RAM base for ARM CR4 core */
-	core_idx = brcmf_sdio_chip_getinfidx(ci, BCMA_CORE_ARM_CR4);
-	if (BRCMF_MAX_CORENUM != core_idx) {
-		if (ci->rambase == 0) {
-			brcmf_err("RAM base not provided with ARM CR4 core\n");
-			return -ENOMEM;
-		}
+	/* check RAM core presence for ARM CM3 core */
+	if (need_socram && !has_socram) {
+		brcmf_err("RAM core not provided with ARM CM3 core\n");
+		return -ENODEV;
 	}
-
 	return 0;
 }
 #else	/* DEBUG */
-static inline int brcmf_sdio_chip_cichk(struct brcmf_chip *ci)
+static inline int brcmf_chip_cores_check(struct brcmf_chip_priv *ci)
 {
 	return 0;
 }
 #endif
 
-static int brcmf_sdio_chip_recognition(struct brcmf_sdio_dev *sdiodev,
-				       struct brcmf_chip *ci)
+static void brcmf_chip_get_raminfo(struct brcmf_chip_priv *ci)
 {
+	switch (ci->pub.chip) {
+	case BCM4329_CHIP_ID:
+		ci->pub.ramsize = BCM4329_RAMSIZE;
+		break;
+	case BCM43143_CHIP_ID:
+		ci->pub.ramsize = BCM43143_RAMSIZE;
+		break;
+	case BCM43241_CHIP_ID:
+		ci->pub.ramsize = 0x90000;
+		break;
+	case BCM4330_CHIP_ID:
+		ci->pub.ramsize = 0x48000;
+		break;
+	case BCM4334_CHIP_ID:
+		ci->pub.ramsize = 0x80000;
+		break;
+	case BCM4335_CHIP_ID:
+		ci->pub.ramsize = 0xc0000;
+		ci->pub.rambase = 0x180000;
+		break;
+	case BCM43362_CHIP_ID:
+		ci->pub.ramsize = 0x3c000;
+		break;
+	case BCM4339_CHIP_ID:
+		ci->pub.ramsize = 0xc0000;
+		ci->pub.rambase = 0x180000;
+		break;
+	default:
+		brcmf_err("unknown chip: %s\n", ci->pub.name);
+		break;
+	}
+}
+
+static int brcmf_chip_recognition(struct brcmf_chip_priv *ci)
+{
+	struct brcmf_core *core;
 	u32 regdata;
 	u32 socitype;
 
@@ -425,184 +474,131 @@ static int brcmf_sdio_chip_recognition(struct brcmf_sdio_dev *sdiodev,
 	 * For different chiptypes or old sdio hosts w/o chipcommon,
 	 * other ways of recognition should be added here.
 	 */
-	regdata = brcmf_sdiod_regrl(sdiodev,
-				    CORE_CC_REG(SI_ENUM_BASE, chipid),
-				    NULL);
-	ci->chip = regdata & CID_ID_MASK;
-	ci->chiprev = (regdata & CID_REV_MASK) >> CID_REV_SHIFT;
-	if (sdiodev->func[0]->device == SDIO_DEVICE_ID_BROADCOM_4335_4339 &&
-	    ci->chiprev >= 2)
-		ci->chip = BCM4339_CHIP_ID;
+	regdata = ci->ops->read32(ci->ctx, CORE_CC_REG(SI_ENUM_BASE, chipid));
+	ci->pub.chip = regdata & CID_ID_MASK;
+	ci->pub.chiprev = (regdata & CID_REV_MASK) >> CID_REV_SHIFT;
 	socitype = (regdata & CID_TYPE_MASK) >> CID_TYPE_SHIFT;
 
-	brcmf_dbg(INFO, "found %s chip: id=0x%x, rev=%d\n",
-		  socitype == SOCI_SB ? "SB" : "AXI", ci->chip, ci->chiprev);
+	brcmf_chip_name(ci->pub.chip, ci->pub.name, sizeof(ci->pub.name));
+	brcmf_dbg(INFO, "found %s chip: BCM%s, rev=%d\n",
+		  socitype == SOCI_SB ? "SB" : "AXI", ci->pub.name,
+		  ci->pub.chiprev);
 
 	if (socitype == SOCI_SB) {
-		if (ci->chip != BCM4329_CHIP_ID) {
+		if (ci->pub.chip != BCM4329_CHIP_ID) {
 			brcmf_err("SB chip is not supported\n");
 			return -ENODEV;
 		}
-		ci->iscoreup = brcmf_sdio_sb_iscoreup;
-		ci->corerev = brcmf_sdio_sb_corerev;
-		ci->coredisable = brcmf_sdio_sb_coredisable;
-		ci->resetcore = brcmf_sdio_sb_resetcore;
-
-		ci->c_inf[0].id = BCMA_CORE_CHIPCOMMON;
-		ci->c_inf[0].base = SI_ENUM_BASE;
-		ci->c_inf[1].id = BCMA_CORE_SDIO_DEV;
-		ci->c_inf[1].base = BCM4329_CORE_BUS_BASE;
-		ci->c_inf[2].id = BCMA_CORE_INTERNAL_MEM;
-		ci->c_inf[2].base = BCM4329_CORE_SOCRAM_BASE;
-		ci->c_inf[3].id = BCMA_CORE_ARM_CM3;
-		ci->c_inf[3].base = BCM4329_CORE_ARM_BASE;
-		ci->c_inf[4].id = BCMA_CORE_80211;
-		ci->c_inf[4].base = BCM43xx_CORE_D11_BASE;
-		ci->ramsize = BCM4329_RAMSIZE;
+		ci->iscoreup = brcmf_chip_sb_iscoreup;
+		ci->coredisable = brcmf_chip_sb_coredisable;
+		ci->resetcore = brcmf_chip_sb_resetcore;
+
+		core = brcmf_chip_add_core(ci, BCMA_CORE_CHIPCOMMON,
+					   SI_ENUM_BASE, 0);
+		brcmf_chip_sb_corerev(ci, core);
+		core = brcmf_chip_add_core(ci, BCMA_CORE_SDIO_DEV,
+					   BCM4329_CORE_BUS_BASE, 0);
+		brcmf_chip_sb_corerev(ci, core);
+		core = brcmf_chip_add_core(ci, BCMA_CORE_INTERNAL_MEM,
+					   BCM4329_CORE_SOCRAM_BASE, 0);
+		brcmf_chip_sb_corerev(ci, core);
+		core = brcmf_chip_add_core(ci, BCMA_CORE_ARM_CM3,
+					   BCM4329_CORE_ARM_BASE, 0);
+		brcmf_chip_sb_corerev(ci, core);
 	} else if (socitype == SOCI_AI) {
-		ci->iscoreup = brcmf_sdio_ai_iscoreup;
-		ci->corerev = brcmf_sdio_ai_corerev;
-		ci->coredisable = brcmf_sdio_ai_coredisable;
-		ci->resetcore = brcmf_sdio_ai_resetcore;
+		ci->iscoreup = brcmf_chip_ai_iscoreup;
+		ci->coredisable = brcmf_chip_ai_coredisable;
+		ci->resetcore = brcmf_chip_ai_resetcore;
 
-		ci->c_inf[0].id = BCMA_CORE_CHIPCOMMON;
-		ci->c_inf[0].base = SI_ENUM_BASE;
+		core = brcmf_chip_add_core(ci, BCMA_CORE_CHIPCOMMON,
+					   SI_ENUM_BASE,
+					   SI_ENUM_BASE + 0x100000);
 
 		/* Address of cores for new chips should be added here */
-		switch (ci->chip) {
+		switch (ci->pub.chip) {
 		case BCM43143_CHIP_ID:
-			ci->c_inf[0].wrapbase = ci->c_inf[0].base + 0x00100000;
-			ci->c_inf[0].cib = 0x2b000000;
-			ci->c_inf[1].id = BCMA_CORE_SDIO_DEV;
-			ci->c_inf[1].base = BCM43143_CORE_BUS_BASE;
-			ci->c_inf[1].wrapbase = ci->c_inf[1].base + 0x00100000;
-			ci->c_inf[1].cib = 0x18000000;
-			ci->c_inf[2].id = BCMA_CORE_INTERNAL_MEM;
-			ci->c_inf[2].base = BCM43143_CORE_SOCRAM_BASE;
-			ci->c_inf[2].wrapbase = ci->c_inf[2].base + 0x00100000;
-			ci->c_inf[2].cib = 0x14000000;
-			ci->c_inf[3].id = BCMA_CORE_ARM_CM3;
-			ci->c_inf[3].base = BCM43143_CORE_ARM_BASE;
-			ci->c_inf[3].wrapbase = ci->c_inf[3].base + 0x00100000;
-			ci->c_inf[3].cib = 0x07000000;
-			ci->c_inf[4].id = BCMA_CORE_80211;
-			ci->c_inf[4].base = BCM43xx_CORE_D11_BASE;
-			ci->c_inf[4].wrapbase = ci->c_inf[4].base + 0x00100000;
-			ci->ramsize = BCM43143_RAMSIZE;
+			core->rev = 43;
+			core = brcmf_chip_add_core(ci, BCMA_CORE_SDIO_DEV,
+						   BCM43143_CORE_BUS_BASE,
+						   BCM43143_CORE_BUS_BASE +
+						   0x100000);
+			core->rev = 24;
+			core = brcmf_chip_add_core(ci, BCMA_CORE_INTERNAL_MEM,
+						   BCM43143_CORE_SOCRAM_BASE,
+						   BCM43143_CORE_SOCRAM_BASE +
+						   0x100000);
+			core->rev = 20;
+			core = brcmf_chip_add_core(ci, BCMA_CORE_ARM_CM3,
+						   BCM43143_CORE_ARM_BASE,
+						   BCM43143_CORE_ARM_BASE +
+						   0x100000);
+			core->rev = 7;
 			break;
 		case BCM43241_CHIP_ID:
-			ci->c_inf[0].wrapbase = 0x18100000;
-			ci->c_inf[0].cib = 0x2a084411;
-			ci->c_inf[1].id = BCMA_CORE_SDIO_DEV;
-			ci->c_inf[1].base = 0x18002000;
-			ci->c_inf[1].wrapbase = 0x18102000;
-			ci->c_inf[1].cib = 0x0e004211;
-			ci->c_inf[2].id = BCMA_CORE_INTERNAL_MEM;
-			ci->c_inf[2].base = 0x18004000;
-			ci->c_inf[2].wrapbase = 0x18104000;
-			ci->c_inf[2].cib = 0x14080401;
-			ci->c_inf[3].id = BCMA_CORE_ARM_CM3;
-			ci->c_inf[3].base = 0x18003000;
-			ci->c_inf[3].wrapbase = 0x18103000;
-			ci->c_inf[3].cib = 0x07004211;
-			ci->c_inf[4].id = BCMA_CORE_80211;
-			ci->c_inf[4].base = BCM43xx_CORE_D11_BASE;
-			ci->c_inf[4].wrapbase = ci->c_inf[4].base + 0x00100000;
-			ci->ramsize = 0x90000;
+			core->rev = 42;
+			core = brcmf_chip_add_core(ci, BCMA_CORE_SDIO_DEV,
+						   0x18002000, 0x18102000);
+			core->rev = 14;
+			core = brcmf_chip_add_core(ci, BCMA_CORE_INTERNAL_MEM,
+						   0x18004000, 0x18104000);
+			core->rev = 20;
+			core = brcmf_chip_add_core(ci, BCMA_CORE_ARM_CM3,
+						   0x18003000, 0x18103000);
+			core->rev = 7;
 			break;
 		case BCM4330_CHIP_ID:
-			ci->c_inf[0].wrapbase = 0x18100000;
-			ci->c_inf[0].cib = 0x27004211;
-			ci->c_inf[1].id = BCMA_CORE_SDIO_DEV;
-			ci->c_inf[1].base = 0x18002000;
-			ci->c_inf[1].wrapbase = 0x18102000;
-			ci->c_inf[1].cib = 0x07004211;
-			ci->c_inf[2].id = BCMA_CORE_INTERNAL_MEM;
-			ci->c_inf[2].base = 0x18004000;
-			ci->c_inf[2].wrapbase = 0x18104000;
-			ci->c_inf[2].cib = 0x0d080401;
-			ci->c_inf[3].id = BCMA_CORE_ARM_CM3;
-			ci->c_inf[3].base = 0x18003000;
-			ci->c_inf[3].wrapbase = 0x18103000;
-			ci->c_inf[3].cib = 0x03004211;
-			ci->c_inf[4].id = BCMA_CORE_80211;
-			ci->c_inf[4].base = BCM43xx_CORE_D11_BASE;
-			ci->c_inf[4].wrapbase = ci->c_inf[4].base + 0x00100000;
-			ci->ramsize = 0x48000;
+			core->rev = 39;
+			core = brcmf_chip_add_core(ci, BCMA_CORE_SDIO_DEV,
+						   0x18002000, 0x18102000);
+			core->rev = 7;
+			core = brcmf_chip_add_core(ci, BCMA_CORE_INTERNAL_MEM,
+						   0x18004000, 0x18104000);
+			core->rev = 13;
+			core = brcmf_chip_add_core(ci, BCMA_CORE_ARM_CM3,
+						   0x18003000, 0x18103000);
+			core->rev = 3;
 			break;
 		case BCM4334_CHIP_ID:
-			ci->c_inf[0].wrapbase = 0x18100000;
-			ci->c_inf[0].cib = 0x29004211;
-			ci->c_inf[1].id = BCMA_CORE_SDIO_DEV;
-			ci->c_inf[1].base = 0x18002000;
-			ci->c_inf[1].wrapbase = 0x18102000;
-			ci->c_inf[1].cib = 0x0d004211;
-			ci->c_inf[2].id = BCMA_CORE_INTERNAL_MEM;
-			ci->c_inf[2].base = 0x18004000;
-			ci->c_inf[2].wrapbase = 0x18104000;
-			ci->c_inf[2].cib = 0x13080401;
-			ci->c_inf[3].id = BCMA_CORE_ARM_CM3;
-			ci->c_inf[3].base = 0x18003000;
-			ci->c_inf[3].wrapbase = 0x18103000;
-			ci->c_inf[3].cib = 0x07004211;
-			ci->c_inf[4].id = BCMA_CORE_80211;
-			ci->c_inf[4].base = BCM43xx_CORE_D11_BASE;
-			ci->c_inf[4].wrapbase = ci->c_inf[4].base + 0x00100000;
-			ci->ramsize = 0x80000;
+			core->rev = 41;
+			core = brcmf_chip_add_core(ci, BCMA_CORE_SDIO_DEV,
+						   0x18002000, 0x18102000);
+			core->rev = 13;
+			core = brcmf_chip_add_core(ci, BCMA_CORE_INTERNAL_MEM,
+						   0x18004000, 0x18104000);
+			core->rev = 19;
+			core = brcmf_chip_add_core(ci, BCMA_CORE_ARM_CM3,
+						   0x18003000, 0x18103000);
+			core->rev = 7;
 			break;
 		case BCM4335_CHIP_ID:
-			ci->c_inf[0].wrapbase = 0x18100000;
-			ci->c_inf[0].cib = 0x2b084411;
-			ci->c_inf[1].id = BCMA_CORE_SDIO_DEV;
-			ci->c_inf[1].base = 0x18005000;
-			ci->c_inf[1].wrapbase = 0x18105000;
-			ci->c_inf[1].cib = 0x0f004211;
-			ci->c_inf[2].id = BCMA_CORE_ARM_CR4;
-			ci->c_inf[2].base = 0x18002000;
-			ci->c_inf[2].wrapbase = 0x18102000;
-			ci->c_inf[2].cib = 0x01084411;
-			ci->c_inf[3].id = BCMA_CORE_80211;
-			ci->c_inf[3].base = BCM43xx_CORE_D11_BASE;
-			ci->c_inf[3].wrapbase = ci->c_inf[3].base + 0x00100000;
-			ci->ramsize = 0xc0000;
-			ci->rambase = 0x180000;
+			core->rev = 43;
+			core = brcmf_chip_add_core(ci, BCMA_CORE_SDIO_DEV,
+						   0x18005000, 0x18105000);
+			core->rev = 15;
+			core = brcmf_chip_add_core(ci, BCMA_CORE_ARM_CR4,
+						   0x18002000, 0x18102000);
+			core->rev = 1;
 			break;
 		case BCM43362_CHIP_ID:
-			ci->c_inf[0].wrapbase = 0x18100000;
-			ci->c_inf[0].cib = 0x27004211;
-			ci->c_inf[1].id = BCMA_CORE_SDIO_DEV;
-			ci->c_inf[1].base = 0x18002000;
-			ci->c_inf[1].wrapbase = 0x18102000;
-			ci->c_inf[1].cib = 0x0a004211;
-			ci->c_inf[2].id = BCMA_CORE_INTERNAL_MEM;
-			ci->c_inf[2].base = 0x18004000;
-			ci->c_inf[2].wrapbase = 0x18104000;
-			ci->c_inf[2].cib = 0x08080401;
-			ci->c_inf[3].id = BCMA_CORE_ARM_CM3;
-			ci->c_inf[3].base = 0x18003000;
-			ci->c_inf[3].wrapbase = 0x18103000;
-			ci->c_inf[3].cib = 0x03004211;
-			ci->c_inf[4].id = BCMA_CORE_80211;
-			ci->c_inf[4].base = BCM43xx_CORE_D11_BASE;
-			ci->c_inf[4].wrapbase = ci->c_inf[4].base + 0x00100000;
-			ci->ramsize = 0x3C000;
+			core->rev = 39;
+			core = brcmf_chip_add_core(ci, BCMA_CORE_SDIO_DEV,
+						   0x18002000, 0x18102000);
+			core->rev = 10;
+			core = brcmf_chip_add_core(ci, BCMA_CORE_INTERNAL_MEM,
+						   0x18004000, 0x18104000);
+			core->rev = 8;
+			core = brcmf_chip_add_core(ci, BCMA_CORE_ARM_CM3,
+						   0x18003000, 0x18103000);
+			core->rev = 3;
 			break;
 		case BCM4339_CHIP_ID:
-			ci->c_inf[0].wrapbase = 0x18100000;
-			ci->c_inf[0].cib = 0x2e084411;
-			ci->c_inf[1].id = BCMA_CORE_SDIO_DEV;
-			ci->c_inf[1].base = 0x18005000;
-			ci->c_inf[1].wrapbase = 0x18105000;
-			ci->c_inf[1].cib = 0x15004211;
-			ci->c_inf[2].id = BCMA_CORE_ARM_CR4;
-			ci->c_inf[2].base = 0x18002000;
-			ci->c_inf[2].wrapbase = 0x18102000;
-			ci->c_inf[2].cib = 0x04084411;
-			ci->c_inf[3].id = BCMA_CORE_80211;
-			ci->c_inf[3].base = BCM43xx_CORE_D11_BASE;
-			ci->c_inf[3].wrapbase = ci->c_inf[3].base + 0x00100000;
-			ci->ramsize = 0xc0000;
-			ci->rambase = 0x180000;
+			core->rev = 46;
+			core = brcmf_chip_add_core(ci, BCMA_CORE_SDIO_DEV,
+						   0x18005000, 0x18105000);
+			core->rev = 21;
+			core = brcmf_chip_add_core(ci, BCMA_CORE_ARM_CR4,
+						   0x18002000, 0x18102000);
+			core->rev = 4;
 			break;
 		default:
 			brcmf_err("AXI chip is not supported\n");
@@ -614,189 +610,321 @@ static int brcmf_sdio_chip_recognition(struct brcmf_sdio_dev *sdiodev,
 		return -ENODEV;
 	}
 
-	return brcmf_sdio_chip_cichk(ci);
+	/* add 802.11 core for all chips on same backplane address */
+	core = brcmf_chip_add_core(ci, BCMA_CORE_80211, 0x18001000, 0x18101000);
+
+	brcmf_chip_get_raminfo(ci);
+
+	return brcmf_chip_cores_check(ci);
 }
 
-static void
-brcmf_sdio_chip_buscoresetup(struct brcmf_sdio_dev *sdiodev,
-			     struct brcmf_chip *ci)
+static void brcmf_chip_disable_arm(struct brcmf_chip_priv *chip, u16 id)
 {
-	u32 base = ci->c_inf[0].base;
+	struct brcmf_core *core;
+	struct brcmf_core_priv *cr4;
+	u32 val;
 
-	/* get chipcommon rev */
-	ci->c_inf[0].rev = ci->corerev(sdiodev, ci, ci->c_inf[0].id);
+
+	core = brcmf_chip_get_core(&chip->pub, id);
+	if (!core)
+		return;
+
+	switch (id) {
+	case BCMA_CORE_ARM_CM3:
+		brcmf_chip_coredisable(core, 0, 0);
+		break;
+	case BCMA_CORE_ARM_CR4:
+		cr4 = container_of(core, struct brcmf_core_priv, pub);
+
+		/* clear all IOCTL bits except HALT bit */
+		val = chip->ops->read32(chip->ctx, cr4->wrapbase + BCMA_IOCTL);
+		val &= ARMCR4_BCMA_IOCTL_CPUHALT;
+		brcmf_chip_resetcore(core, val, ARMCR4_BCMA_IOCTL_CPUHALT,
+				     ARMCR4_BCMA_IOCTL_CPUHALT);
+		break;
+	default:
+		brcmf_err("unknown id: %u\n", id);
+		break;
+	}
+}
+
+static int brcmf_chip_setup(struct brcmf_chip_priv *chip)
+{
+	struct brcmf_chip *pub;
+	struct brcmf_core_priv *cc;
+	struct brcmf_core_priv *bus;
+	u32 base;
+	u32 val;
+	int ret = 0;
+
+	pub = &chip->pub;
+	cc = list_first_entry(&chip->cores, struct brcmf_core_priv, list);
+	base = cc->pub.base;
 
 	/* get chipcommon capabilites */
-	ci->c_inf[0].caps = brcmf_sdiod_regrl(sdiodev,
-					      CORE_CC_REG(base, capabilities),
-					      NULL);
+	pub->cc_caps = chip->ops->read32(chip->ctx,
+					 CORE_CC_REG(base, capabilities));
 
 	/* get pmu caps & rev */
-	if (ci->c_inf[0].caps & CC_CAP_PMU) {
-		ci->pmucaps =
-			brcmf_sdiod_regrl(sdiodev,
-					  CORE_CC_REG(base, pmucapabilities),
-					  NULL);
-		ci->pmurev = ci->pmucaps & PCAP_REV_MASK;
+	if (pub->cc_caps & CC_CAP_PMU) {
+		val = chip->ops->read32(chip->ctx,
+					CORE_CC_REG(base, pmucapabilities));
+		pub->pmurev = val & PCAP_REV_MASK;
+		pub->pmucaps = val;
 	}
 
-	ci->c_inf[1].rev = ci->corerev(sdiodev, ci, ci->c_inf[1].id);
+	bus = list_next_entry(cc, list);
 
 	brcmf_dbg(INFO, "ccrev=%d, pmurev=%d, buscore rev/type=%d/0x%x\n",
-		  ci->c_inf[0].rev, ci->pmurev,
-		  ci->c_inf[1].rev, ci->c_inf[1].id);
+		  cc->pub.rev, pub->pmurev, bus->pub.rev, bus->pub.id);
+
+	/* execute bus core specific setup */
+	if (chip->ops->setup)
+		ret = chip->ops->setup(chip->ctx, pub);
 
 	/*
 	 * Make sure any on-chip ARM is off (in case strapping is wrong),
 	 * or downloaded code was already running.
 	 */
-	ci->coredisable(sdiodev, ci, BCMA_CORE_ARM_CM3, 0, 0);
+	brcmf_chip_disable_arm(chip, BCMA_CORE_ARM_CM3);
+	brcmf_chip_disable_arm(chip, BCMA_CORE_ARM_CR4);
+	return ret;
 }
 
-int brcmf_sdio_chip_attach(struct brcmf_sdio_dev *sdiodev,
-			   struct brcmf_chip **ci_ptr)
+struct brcmf_chip *brcmf_chip_attach(void *ctx,
+				     const struct brcmf_buscore_ops *ops)
 {
-	int ret;
-	struct brcmf_chip *ci;
+	struct brcmf_chip_priv *chip;
+	int err = 0;
+
+	if (WARN_ON(!ops->read32))
+		err = -EINVAL;
+	if (WARN_ON(!ops->write32))
+		err = -EINVAL;
+	if (WARN_ON(!ops->prepare))
+		err = -EINVAL;
+	if (WARN_ON(!ops->exit_dl))
+		err = -EINVAL;
+	if (err < 0)
+		return ERR_PTR(-EINVAL);
+
+	chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return ERR_PTR(-ENOMEM);
+
+	INIT_LIST_HEAD(&chip->cores);
+	chip->num_cores = 0;
+	chip->ops = ops;
+	chip->ctx = ctx;
+
+	err = ops->prepare(ctx);
+	if (err < 0)
+		goto fail;
+
+	err = brcmf_chip_recognition(chip);
+	if (err < 0)
+		goto fail;
+
+	err = brcmf_chip_setup(chip);
+	if (err < 0)
+		goto fail;
+
+	return &chip->pub;
+
+fail:
+	brcmf_chip_detach(&chip->pub);
+	return ERR_PTR(err);
+}
 
-	brcmf_dbg(TRACE, "Enter\n");
+void brcmf_chip_detach(struct brcmf_chip *pub)
+{
+	struct brcmf_chip_priv *chip;
+	struct brcmf_core_priv *core;
+	struct brcmf_core_priv *tmp;
+
+	chip = container_of(pub, struct brcmf_chip_priv, pub);
+	list_for_each_entry_safe(core, tmp, &chip->cores, list) {
+		list_del(&core->list);
+		kfree(core);
+	}
+	kfree(chip);
+}
 
-	ci = kzalloc(sizeof(*ci), GFP_ATOMIC);
-	if (!ci)
-		return -ENOMEM;
+struct brcmf_core *brcmf_chip_get_core(struct brcmf_chip *pub, u16 coreid)
+{
+	struct brcmf_chip_priv *chip;
+	struct brcmf_core_priv *core;
 
-	ret = brcmf_sdio_buscoreprep(sdiodev);
-	if (ret != 0)
-		goto err;
+	chip = container_of(pub, struct brcmf_chip_priv, pub);
+	list_for_each_entry(core, &chip->cores, list)
+		if (core->pub.id == coreid)
+			return &core->pub;
 
-	ret = brcmf_sdio_chip_recognition(sdiodev, ci);
-	if (ret != 0)
-		goto err;
+	return NULL;
+}
 
-	brcmf_sdio_chip_buscoresetup(sdiodev, ci);
+struct brcmf_core *brcmf_chip_get_chipcommon(struct brcmf_chip *pub)
+{
+	struct brcmf_chip_priv *chip;
+	struct brcmf_core_priv *cc;
+
+	chip = container_of(pub, struct brcmf_chip_priv, pub);
+	cc = list_first_entry(&chip->cores, struct brcmf_core_priv, list);
+	if (WARN_ON(!cc || cc->pub.id != BCMA_CORE_CHIPCOMMON))
+		return brcmf_chip_get_core(pub, BCMA_CORE_CHIPCOMMON);
+	return &cc->pub;
+}
 
-	brcmf_sdiod_regwl(sdiodev, CORE_CC_REG(ci->c_inf[0].base, gpiopullup),
-			  0, NULL);
-	brcmf_sdiod_regwl(sdiodev, CORE_CC_REG(ci->c_inf[0].base, gpiopulldown),
-			  0, NULL);
+bool brcmf_chip_iscoreup(struct brcmf_core *pub)
+{
+	struct brcmf_core_priv *core;
 
-	*ci_ptr = ci;
-	return 0;
+	core = container_of(pub, struct brcmf_core_priv, pub);
+	return core->chip->iscoreup(core);
+}
 
-err:
-	kfree(ci);
-	return ret;
+void brcmf_chip_coredisable(struct brcmf_core *pub, u32 prereset, u32 reset)
+{
+	struct brcmf_core_priv *core;
+
+	core = container_of(pub, struct brcmf_core_priv, pub);
+	core->chip->coredisable(core, prereset, reset);
 }
 
-void
-brcmf_sdio_chip_detach(struct brcmf_chip **ci_ptr)
+void brcmf_chip_resetcore(struct brcmf_core *pub, u32 prereset, u32 reset,
+			  u32 postreset)
 {
-	brcmf_dbg(TRACE, "Enter\n");
+	struct brcmf_core_priv *core;
 
-	kfree(*ci_ptr);
-	*ci_ptr = NULL;
+	core = container_of(pub, struct brcmf_core_priv, pub);
+	core->chip->resetcore(core, prereset, reset, postreset);
 }
 
 static void
-brcmf_sdio_chip_cm3_enterdl(struct brcmf_sdio_dev *sdiodev,
-			    struct brcmf_chip *ci)
+brcmf_chip_cm3_enterdl(struct brcmf_chip_priv *chip)
 {
-	ci->coredisable(sdiodev, ci, BCMA_CORE_ARM_CM3, 0, 0);
-	ci->resetcore(sdiodev, ci, BCMA_CORE_80211,
-		      D11_BCMA_IOCTL_PHYRESET | D11_BCMA_IOCTL_PHYCLOCKEN,
-		      D11_BCMA_IOCTL_PHYCLOCKEN, D11_BCMA_IOCTL_PHYCLOCKEN);
-	ci->resetcore(sdiodev, ci, BCMA_CORE_INTERNAL_MEM, 0, 0, 0);
+	struct brcmf_core *core;
+
+	brcmf_chip_disable_arm(chip, BCMA_CORE_ARM_CM3);
+	core = brcmf_chip_get_core(&chip->pub, BCMA_CORE_80211);
+	brcmf_chip_resetcore(core, D11_BCMA_IOCTL_PHYRESET |
+				   D11_BCMA_IOCTL_PHYCLOCKEN,
+			     D11_BCMA_IOCTL_PHYCLOCKEN,
+			     D11_BCMA_IOCTL_PHYCLOCKEN);
+	core = brcmf_chip_get_core(&chip->pub, BCMA_CORE_INTERNAL_MEM);
+	brcmf_chip_resetcore(core, 0, 0, 0);
 }
 
-static bool brcmf_sdio_chip_cm3_exitdl(struct brcmf_sdio_dev *sdiodev,
-				       struct brcmf_chip *ci)
+static bool brcmf_chip_cm3_exitdl(struct brcmf_chip_priv *chip)
 {
-	u8 core_idx;
-	u32 reg_addr;
+	struct brcmf_core *core;
 
-	if (!ci->iscoreup(sdiodev, ci, BCMA_CORE_INTERNAL_MEM)) {
+	core = brcmf_chip_get_core(&chip->pub, BCMA_CORE_INTERNAL_MEM);
+	if (!brcmf_chip_iscoreup(core)) {
 		brcmf_err("SOCRAM core is down after reset?\n");
 		return false;
 	}
 
-	/* clear all interrupts */
-	core_idx = brcmf_sdio_chip_getinfidx(ci, BCMA_CORE_SDIO_DEV);
-	reg_addr = ci->c_inf[core_idx].base;
-	reg_addr += offsetof(struct sdpcmd_regs, intstatus);
-	brcmf_sdiod_regwl(sdiodev, reg_addr, 0xFFFFFFFF, NULL);
+	chip->ops->exit_dl(chip->ctx, &chip->pub, 0);
 
-	ci->resetcore(sdiodev, ci, BCMA_CORE_ARM_CM3, 0, 0, 0);
+	core = brcmf_chip_get_core(&chip->pub, BCMA_CORE_ARM_CM3);
+	brcmf_chip_resetcore(core, 0, 0, 0);
 
 	return true;
 }
 
 static inline void
-brcmf_sdio_chip_cr4_enterdl(struct brcmf_sdio_dev *sdiodev,
-			    struct brcmf_chip *ci)
+brcmf_chip_cr4_enterdl(struct brcmf_chip_priv *chip)
 {
-	u8 idx;
-	u32 regdata;
-	u32 wrapbase;
-	idx = brcmf_sdio_chip_getinfidx(ci, BCMA_CORE_ARM_CR4);
+	struct brcmf_core *core;
 
-	if (idx == BRCMF_MAX_CORENUM)
-		return;
+	brcmf_chip_disable_arm(chip, BCMA_CORE_ARM_CR4);
 
-	wrapbase = ci->c_inf[idx].wrapbase;
-	regdata = brcmf_sdiod_regrl(sdiodev, wrapbase + BCMA_IOCTL, NULL);
-	regdata &= ARMCR4_BCMA_IOCTL_CPUHALT;
-	ci->resetcore(sdiodev, ci, BCMA_CORE_ARM_CR4, regdata,
-		      ARMCR4_BCMA_IOCTL_CPUHALT, ARMCR4_BCMA_IOCTL_CPUHALT);
-	ci->resetcore(sdiodev, ci, BCMA_CORE_80211,
-		      D11_BCMA_IOCTL_PHYRESET | D11_BCMA_IOCTL_PHYCLOCKEN,
-		      D11_BCMA_IOCTL_PHYCLOCKEN, D11_BCMA_IOCTL_PHYCLOCKEN);
+	core = brcmf_chip_get_core(&chip->pub, BCMA_CORE_80211);
+	brcmf_chip_resetcore(core, D11_BCMA_IOCTL_PHYRESET |
+				   D11_BCMA_IOCTL_PHYCLOCKEN,
+			     D11_BCMA_IOCTL_PHYCLOCKEN,
+			     D11_BCMA_IOCTL_PHYCLOCKEN);
 }
 
-static bool brcmf_sdio_chip_cr4_exitdl(struct brcmf_sdio_dev *sdiodev,
-				       struct brcmf_chip *ci, u32 rstvec)
+static bool brcmf_chip_cr4_exitdl(struct brcmf_chip_priv *chip, u32 rstvec)
 {
-	u8 core_idx;
-	u32 reg_addr;
+	struct brcmf_core *core;
 
-	/* clear all interrupts */
-	core_idx = brcmf_sdio_chip_getinfidx(ci, BCMA_CORE_SDIO_DEV);
-	reg_addr = ci->c_inf[core_idx].base;
-	reg_addr += offsetof(struct sdpcmd_regs, intstatus);
-	brcmf_sdiod_regwl(sdiodev, reg_addr, 0xFFFFFFFF, NULL);
-
-	/* Write reset vector to address 0 */
-	brcmf_sdiod_ramrw(sdiodev, true, 0, (void *)&rstvec,
-			  sizeof(rstvec));
+	chip->ops->exit_dl(chip->ctx, &chip->pub, rstvec);
 
 	/* restore ARM */
-	ci->resetcore(sdiodev, ci, BCMA_CORE_ARM_CR4, ARMCR4_BCMA_IOCTL_CPUHALT,
-		      0, 0);
+	core = brcmf_chip_get_core(&chip->pub, BCMA_CORE_ARM_CR4);
+	brcmf_chip_resetcore(core, ARMCR4_BCMA_IOCTL_CPUHALT, 0, 0);
 
 	return true;
 }
 
-void brcmf_sdio_chip_enter_download(struct brcmf_sdio_dev *sdiodev,
-				    struct brcmf_chip *ci)
+void brcmf_chip_enter_download(struct brcmf_chip *pub)
 {
-	u8 arm_core_idx;
+	struct brcmf_chip_priv *chip;
+	struct brcmf_core *arm;
+
+	brcmf_dbg(TRACE, "Enter\n");
 
-	arm_core_idx = brcmf_sdio_chip_getinfidx(ci, BCMA_CORE_ARM_CM3);
-	if (BRCMF_MAX_CORENUM != arm_core_idx) {
-		brcmf_sdio_chip_cm3_enterdl(sdiodev, ci);
+	chip = container_of(pub, struct brcmf_chip_priv, pub);
+	arm = brcmf_chip_get_core(pub, BCMA_CORE_ARM_CM3);
+	if (arm) {
+		brcmf_chip_cm3_enterdl(chip);
 		return;
 	}
 
-	brcmf_sdio_chip_cr4_enterdl(sdiodev, ci);
+	brcmf_chip_cr4_enterdl(chip);
+}
+
+bool brcmf_chip_exit_download(struct brcmf_chip *pub, u32 rstvec)
+{
+	struct brcmf_chip_priv *chip;
+	struct brcmf_core *arm;
+
+	brcmf_dbg(TRACE, "Enter\n");
+
+	chip = container_of(pub, struct brcmf_chip_priv, pub);
+	arm = brcmf_chip_get_core(pub, BCMA_CORE_ARM_CM3);
+	if (arm)
+		return brcmf_chip_cm3_exitdl(chip);
+
+	return brcmf_chip_cr4_exitdl(chip, rstvec);
 }
 
-bool brcmf_sdio_chip_exit_download(struct brcmf_sdio_dev *sdiodev,
-				   struct brcmf_chip *ci, u32 rstvec)
+bool brcmf_chip_sr_capable(struct brcmf_chip *pub)
 {
-	u8 arm_core_idx;
+	u32 base, addr, reg, pmu_cc3_mask = ~0;
+	struct brcmf_chip_priv *chip;
 
-	arm_core_idx = brcmf_sdio_chip_getinfidx(ci, BCMA_CORE_ARM_CM3);
-	if (BRCMF_MAX_CORENUM != arm_core_idx)
-		return brcmf_sdio_chip_cm3_exitdl(sdiodev, ci);
+	brcmf_dbg(TRACE, "Enter\n");
+
+	/* old chips with PMU version less than 17 don't support save restore */
+	if (pub->pmurev < 17)
+		return false;
 
-	return brcmf_sdio_chip_cr4_exitdl(sdiodev, ci, rstvec);
+	base = brcmf_chip_get_chipcommon(pub)->base;
+	chip = container_of(pub, struct brcmf_chip_priv, pub);
+
+	switch (pub->chip) {
+	case BCM43241_CHIP_ID:
+	case BCM4335_CHIP_ID:
+	case BCM4339_CHIP_ID:
+		/* read PMU chipcontrol register 3 */
+		addr = CORE_CC_REG(base, chipcontrol_addr);
+		chip->ops->write32(chip->ctx, addr, 3);
+		addr = CORE_CC_REG(base, chipcontrol_data);
+		reg = chip->ops->read32(chip->ctx, addr);
+		return (reg & pmu_cc3_mask) != 0;
+	default:
+		addr = CORE_CC_REG(base, pmucapabilities_ext);
+		reg = chip->ops->read32(chip->ctx, addr);
+		if ((reg & PCAPEXT_SR_SUPPORTED_MASK) == 0)
+			return false;
+
+		addr = CORE_CC_REG(base, retention_ctl);
+		reg = chip->ops->read32(chip->ctx, addr);
+		return (reg & (PMU_RCTL_MACPHY_DISABLE_MASK |
+			       PMU_RCTL_LOGIC_DISABLE_MASK)) == 0;
+	}
 }
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/chip.h b/drivers/net/wireless/brcm80211/brcmfmac/chip.h
index 2bc00c5d1a7f..c32908da90c8 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/chip.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2011 Broadcom Corporation
+ * Copyright (c) 2014 Broadcom Corporation
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -13,216 +13,79 @@
  * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
  * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
+#ifndef BRCMF_CHIP_H
+#define BRCMF_CHIP_H
 
-#ifndef _BRCMFMAC_SDIO_CHIP_H_
-#define _BRCMFMAC_SDIO_CHIP_H_
+#include <linux/types.h>
 
-/*
- * Core reg address translation.
- * Both macro's returns a 32 bits byte address on the backplane bus.
- */
 #define CORE_CC_REG(base, field) \
 		(base + offsetof(struct chipcregs, field))
-#define CORE_BUS_REG(base, field) \
-		(base + offsetof(struct sdpcmd_regs, field))
-#define CORE_SB(base, field) \
-		(base + SBCONFIGOFF + offsetof(struct sbconfig, field))
-
-/* SDIO function 1 register CHIPCLKCSR */
-/* Force ALP request to backplane */
-#define SBSDIO_FORCE_ALP		0x01
-/* Force HT request to backplane */
-#define SBSDIO_FORCE_HT			0x02
-/* Force ILP request to backplane */
-#define SBSDIO_FORCE_ILP		0x04
-/* Make ALP ready (power up xtal) */
-#define SBSDIO_ALP_AVAIL_REQ		0x08
-/* Make HT ready (power up PLL) */
-#define SBSDIO_HT_AVAIL_REQ		0x10
-/* Squelch clock requests from HW */
-#define SBSDIO_FORCE_HW_CLKREQ_OFF	0x20
-/* Status: ALP is ready */
-#define SBSDIO_ALP_AVAIL		0x40
-/* Status: HT is ready */
-#define SBSDIO_HT_AVAIL			0x80
-#define SBSDIO_AVBITS		(SBSDIO_HT_AVAIL | SBSDIO_ALP_AVAIL)
-#define SBSDIO_ALPAV(regval)	((regval) & SBSDIO_AVBITS)
-#define SBSDIO_HTAV(regval)	(((regval) & SBSDIO_AVBITS) == SBSDIO_AVBITS)
-#define SBSDIO_ALPONLY(regval)	(SBSDIO_ALPAV(regval) && !SBSDIO_HTAV(regval))
-#define SBSDIO_CLKAV(regval, alponly) \
-	(SBSDIO_ALPAV(regval) && (alponly ? 1 : SBSDIO_HTAV(regval)))
-
-#define BRCMF_MAX_CORENUM	6
-
-struct brcmf_core {
-	u16 id;
-	u16 rev;
-	u32 base;
-	u32 wrapbase;
-	u32 caps;
-	u32 cib;
-};
 
+/**
+ * struct brcmf_chip - chip level information.
+ *
+ * @chip: chip identifier.
+ * @chiprev: chip revision.
+ * @cc_caps: chipcommon core capabilities.
+ * @pmucaps: PMU capabilities.
+ * @pmurev: PMU revision.
+ * @rambase: RAM base address (only applicable for ARM CR4 chips).
+ * @ramsize: amount of RAM on chip.
+ * @name: string representation of the chip identifier.
+ */
 struct brcmf_chip {
 	u32 chip;
 	u32 chiprev;
-	/* core info */
-	/* always put chipcommon core at 0, bus core at 1 */
-	struct brcmf_core c_inf[BRCMF_MAX_CORENUM];
-	u32 pmurev;
+	u32 cc_caps;
 	u32 pmucaps;
-	u32 ramsize;
+	u32 pmurev;
 	u32 rambase;
-	u32 rst_vec;	/* reset vertor for ARM CR4 core */
-
-	bool (*iscoreup)(struct brcmf_sdio_dev *sdiodev, struct brcmf_chip *ci,
-			 u16 coreid);
-	u32 (*corerev)(struct brcmf_sdio_dev *sdiodev, struct brcmf_chip *ci,
-			 u16 coreid);
-	void (*coredisable)(struct brcmf_sdio_dev *sdiodev,
-			struct brcmf_chip *ci, u16 coreid, u32 pre_resetbits,
-			u32 in_resetbits);
-	void (*resetcore)(struct brcmf_sdio_dev *sdiodev,
-			struct brcmf_chip *ci, u16 coreid, u32 pre_resetbits,
-			u32 in_resetbits, u32 post_resetbits);
+	u32 ramsize;
+	char name[8];
 };
 
-struct sbconfig {
-	u32 PAD[2];
-	u32 sbipsflag;	/* initiator port ocp slave flag */
-	u32 PAD[3];
-	u32 sbtpsflag;	/* target port ocp slave flag */
-	u32 PAD[11];
-	u32 sbtmerrloga;	/* (sonics >= 2.3) */
-	u32 PAD;
-	u32 sbtmerrlog;	/* (sonics >= 2.3) */
-	u32 PAD[3];
-	u32 sbadmatch3;	/* address match3 */
-	u32 PAD;
-	u32 sbadmatch2;	/* address match2 */
-	u32 PAD;
-	u32 sbadmatch1;	/* address match1 */
-	u32 PAD[7];
-	u32 sbimstate;	/* initiator agent state */
-	u32 sbintvec;	/* interrupt mask */
-	u32 sbtmstatelow;	/* target state */
-	u32 sbtmstatehigh;	/* target state */
-	u32 sbbwa0;		/* bandwidth allocation table0 */
-	u32 PAD;
-	u32 sbimconfiglow;	/* initiator configuration */
-	u32 sbimconfighigh;	/* initiator configuration */
-	u32 sbadmatch0;	/* address match0 */
-	u32 PAD;
-	u32 sbtmconfiglow;	/* target configuration */
-	u32 sbtmconfighigh;	/* target configuration */
-	u32 sbbconfig;	/* broadcast configuration */
-	u32 PAD;
-	u32 sbbstate;	/* broadcast state */
-	u32 PAD[3];
-	u32 sbactcnfg;	/* activate configuration */
-	u32 PAD[3];
-	u32 sbflagst;	/* current sbflags */
-	u32 PAD[3];
-	u32 sbidlow;		/* identification */
-	u32 sbidhigh;	/* identification */
+/**
+ * struct brcmf_core - core related information.
+ *
+ * @id: core identifier.
+ * @rev: core revision.
+ * @base: base address of core register space.
+ */
+struct brcmf_core {
+	u16 id;
+	u16 rev;
+	u32 base;
 };
 
-/* sdio core registers */
-struct sdpcmd_regs {
-	u32 corecontrol;		/* 0x00, rev8 */
-	u32 corestatus;			/* rev8 */
-	u32 PAD[1];
-	u32 biststatus;			/* rev8 */
-
-	/* PCMCIA access */
-	u16 pcmciamesportaladdr;	/* 0x010, rev8 */
-	u16 PAD[1];
-	u16 pcmciamesportalmask;	/* rev8 */
-	u16 PAD[1];
-	u16 pcmciawrframebc;		/* rev8 */
-	u16 PAD[1];
-	u16 pcmciaunderflowtimer;	/* rev8 */
-	u16 PAD[1];
-
-	/* interrupt */
-	u32 intstatus;			/* 0x020, rev8 */
-	u32 hostintmask;		/* rev8 */
-	u32 intmask;			/* rev8 */
-	u32 sbintstatus;		/* rev8 */
-	u32 sbintmask;			/* rev8 */
-	u32 funcintmask;		/* rev4 */
-	u32 PAD[2];
-	u32 tosbmailbox;		/* 0x040, rev8 */
-	u32 tohostmailbox;		/* rev8 */
-	u32 tosbmailboxdata;		/* rev8 */
-	u32 tohostmailboxdata;		/* rev8 */
-
-	/* synchronized access to registers in SDIO clock domain */
-	u32 sdioaccess;			/* 0x050, rev8 */
-	u32 PAD[3];
-
-	/* PCMCIA frame control */
-	u8 pcmciaframectrl;		/* 0x060, rev8 */
-	u8 PAD[3];
-	u8 pcmciawatermark;		/* rev8 */
-	u8 PAD[155];
-
-	/* interrupt batching control */
-	u32 intrcvlazy;			/* 0x100, rev8 */
-	u32 PAD[3];
-
-	/* counters */
-	u32 cmd52rd;			/* 0x110, rev8 */
-	u32 cmd52wr;			/* rev8 */
-	u32 cmd53rd;			/* rev8 */
-	u32 cmd53wr;			/* rev8 */
-	u32 abort;			/* rev8 */
-	u32 datacrcerror;		/* rev8 */
-	u32 rdoutofsync;		/* rev8 */
-	u32 wroutofsync;		/* rev8 */
-	u32 writebusy;			/* rev8 */
-	u32 readwait;			/* rev8 */
-	u32 readterm;			/* rev8 */
-	u32 writeterm;			/* rev8 */
-	u32 PAD[40];
-	u32 clockctlstatus;		/* rev8 */
-	u32 PAD[7];
-
-	u32 PAD[128];			/* DMA engines */
-
-	/* SDIO/PCMCIA CIS region */
-	char cis[512];			/* 0x400-0x5ff, rev6 */
-
-	/* PCMCIA function control registers */
-	char pcmciafcr[256];		/* 0x600-6ff, rev6 */
-	u16 PAD[55];
-
-	/* PCMCIA backplane access */
-	u16 backplanecsr;		/* 0x76E, rev6 */
-	u16 backplaneaddr0;		/* rev6 */
-	u16 backplaneaddr1;		/* rev6 */
-	u16 backplaneaddr2;		/* rev6 */
-	u16 backplaneaddr3;		/* rev6 */
-	u16 backplanedata0;		/* rev6 */
-	u16 backplanedata1;		/* rev6 */
-	u16 backplanedata2;		/* rev6 */
-	u16 backplanedata3;		/* rev6 */
-	u16 PAD[31];
-
-	/* sprom "size" & "blank" info */
-	u16 spromstatus;		/* 0x7BE, rev2 */
-	u32 PAD[464];
-
-	u16 PAD[0x80];
+/**
+ * struct brcmf_buscore_ops - buscore specific callbacks.
+ *
+ * @read32: read 32-bit value over bus.
+ * @write32: write 32-bit value over bus.
+ * @prepare: prepare bus for core configuration.
+ * @setup: bus-specific core setup.
+ * @exit_dl: exit download state.
+ *	The callback should use the provided @rstvec when non-zero.
+ */
+struct brcmf_buscore_ops {
+	u32 (*read32)(void *ctx, u32 addr);
+	void (*write32)(void *ctx, u32 addr, u32 value);
+	int (*prepare)(void *ctx);
+	int (*setup)(void *ctx, struct brcmf_chip *chip);
+	void (*exit_dl)(void *ctx, struct brcmf_chip *chip, u32 rstvec);
 };
 
-int brcmf_sdio_chip_attach(struct brcmf_sdio_dev *sdiodev,
-			   struct brcmf_chip **ci_ptr);
-void brcmf_sdio_chip_detach(struct brcmf_chip **ci_ptr);
-u8 brcmf_sdio_chip_getinfidx(struct brcmf_chip *ci, u16 coreid);
-void brcmf_sdio_chip_enter_download(struct brcmf_sdio_dev *sdiodev,
-				    struct brcmf_chip *ci);
-bool brcmf_sdio_chip_exit_download(struct brcmf_sdio_dev *sdiodev,
-				   struct brcmf_chip *ci, u32 rstvec);
-
-#endif		/* _BRCMFMAC_SDIO_CHIP_H_ */
+struct brcmf_chip *brcmf_chip_attach(void *ctx,
+				     const struct brcmf_buscore_ops *ops);
+void brcmf_chip_detach(struct brcmf_chip *chip);
+struct brcmf_core *brcmf_chip_get_core(struct brcmf_chip *chip, u16 coreid);
+struct brcmf_core *brcmf_chip_get_chipcommon(struct brcmf_chip *chip);
+bool brcmf_chip_iscoreup(struct brcmf_core *core);
+void brcmf_chip_coredisable(struct brcmf_core *core, u32 prereset, u32 reset);
+void brcmf_chip_resetcore(struct brcmf_core *core, u32 prereset, u32 reset,
+			  u32 postreset);
+void brcmf_chip_enter_download(struct brcmf_chip *ci);
+bool brcmf_chip_exit_download(struct brcmf_chip *ci, u32 rstvec);
+bool brcmf_chip_sr_capable(struct brcmf_chip *pub);
+
+#endif /* BRCMF_AXIDMP_H */
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index 098185442085..3056f1173c67 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -23,6 +23,7 @@
 #include <linux/interrupt.h>
 #include <linux/sched.h>
 #include <linux/mmc/sdio.h>
+#include <linux/mmc/sdio_ids.h>
 #include <linux/mmc/sdio_func.h>
 #include <linux/mmc/card.h>
 #include <linux/semaphore.h>
@@ -156,6 +157,33 @@ struct rte_console {
 /* manfid tuple length, include tuple, link bytes */
 #define SBSDIO_CIS_MANFID_TUPLE_LEN	6
 
+#define CORE_BUS_REG(base, field) \
+		(base + offsetof(struct sdpcmd_regs, field))
+
+/* SDIO function 1 register CHIPCLKCSR */
+/* Force ALP request to backplane */
+#define SBSDIO_FORCE_ALP		0x01
+/* Force HT request to backplane */
+#define SBSDIO_FORCE_HT			0x02
+/* Force ILP request to backplane */
+#define SBSDIO_FORCE_ILP		0x04
+/* Make ALP ready (power up xtal) */
+#define SBSDIO_ALP_AVAIL_REQ		0x08
+/* Make HT ready (power up PLL) */
+#define SBSDIO_HT_AVAIL_REQ		0x10
+/* Squelch clock requests from HW */
+#define SBSDIO_FORCE_HW_CLKREQ_OFF	0x20
+/* Status: ALP is ready */
+#define SBSDIO_ALP_AVAIL		0x40
+/* Status: HT is ready */
+#define SBSDIO_HT_AVAIL			0x80
+#define SBSDIO_AVBITS		(SBSDIO_HT_AVAIL | SBSDIO_ALP_AVAIL)
+#define SBSDIO_ALPAV(regval)	((regval) & SBSDIO_AVBITS)
+#define SBSDIO_HTAV(regval)	(((regval) & SBSDIO_AVBITS) == SBSDIO_AVBITS)
+#define SBSDIO_ALPONLY(regval)	(SBSDIO_ALPAV(regval) && !SBSDIO_HTAV(regval))
+#define SBSDIO_CLKAV(regval, alponly) \
+	(SBSDIO_ALPAV(regval) && (alponly ? 1 : SBSDIO_HTAV(regval)))
+
 /* intstatus */
 #define I_SMB_SW0	(1 << 0)	/* To SB Mail S/W interrupt 0 */
 #define I_SMB_SW1	(1 << 1)	/* To SB Mail S/W interrupt 1 */
@@ -665,27 +693,24 @@ static bool data_ok(struct brcmf_sdio *bus)
  * Reads a register in the SDIO hardware block. This block occupies a series of
  * adresses on the 32 bit backplane bus.
  */
-static int
-r_sdreg32(struct brcmf_sdio *bus, u32 *regvar, u32 offset)
+static int r_sdreg32(struct brcmf_sdio *bus, u32 *regvar, u32 offset)
 {
-	u8 idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV);
+	struct brcmf_core *core;
 	int ret;
 
-	*regvar = brcmf_sdiod_regrl(bus->sdiodev,
-				    bus->ci->c_inf[idx].base + offset, &ret);
+	core = brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV);
+	*regvar = brcmf_sdiod_regrl(bus->sdiodev, core->base + offset, &ret);
 
 	return ret;
 }
 
-static int
-w_sdreg32(struct brcmf_sdio *bus, u32 regval, u32 reg_offset)
+static int w_sdreg32(struct brcmf_sdio *bus, u32 regval, u32 reg_offset)
 {
-	u8 idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV);
+	struct brcmf_core *core;
 	int ret;
 
-	brcmf_sdiod_regwl(bus->sdiodev,
-			  bus->ci->c_inf[idx].base + reg_offset,
-			  regval, &ret);
+	core = brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV);
+	brcmf_sdiod_regwl(bus->sdiodev, core->base + reg_offset, regval, &ret);
 
 	return ret;
 }
@@ -2425,14 +2450,13 @@ static inline void brcmf_sdio_clrintr(struct brcmf_sdio *bus)
 
 static int brcmf_sdio_intr_rstatus(struct brcmf_sdio *bus)
 {
-	u8 idx;
+	struct brcmf_core *buscore;
 	u32 addr;
 	unsigned long val;
 	int n, ret;
 
-	idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV);
-	addr = bus->ci->c_inf[idx].base +
-	       offsetof(struct sdpcmd_regs, intstatus);
+	buscore = brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV);
+	addr = buscore->base + offsetof(struct sdpcmd_regs, intstatus);
 
 	val = brcmf_sdiod_regrl(bus->sdiodev, addr, &ret);
 	bus->sdcnt.f1regdata++;
@@ -3344,7 +3368,7 @@ static int brcmf_sdio_download_firmware(struct brcmf_sdio *bus)
 	brcmf_sdio_clkctl(bus, CLK_AVAIL, false);
 
 	/* Keep arm in reset */
-	brcmf_sdio_chip_enter_download(bus->sdiodev, bus->ci);
+	brcmf_chip_enter_download(bus->ci);
 
 	fw = brcmf_sdio_get_fw(bus, BRCMF_FIRMWARE_BIN);
 	if (fw == NULL) {
@@ -3376,7 +3400,7 @@ static int brcmf_sdio_download_firmware(struct brcmf_sdio *bus)
 	}
 
 	/* Take arm out of reset */
-	if (!brcmf_sdio_chip_exit_download(bus->sdiodev, bus->ci, rstvec)) {
+	if (!brcmf_chip_exit_download(bus->ci, rstvec)) {
 		brcmf_err("error getting out of ARM core reset\n");
 		goto err;
 	}
@@ -3391,40 +3415,6 @@ err:
 	return bcmerror;
 }
 
-static bool brcmf_sdio_sr_capable(struct brcmf_sdio *bus)
-{
-	u32 addr, reg, pmu_cc3_mask = ~0;
-	int err;
-
-	brcmf_dbg(TRACE, "Enter\n");
-
-	/* old chips with PMU version less than 17 don't support save restore */
-	if (bus->ci->pmurev < 17)
-		return false;
-
-	switch (bus->ci->chip) {
-	case BCM43241_CHIP_ID:
-	case BCM4335_CHIP_ID:
-	case BCM4339_CHIP_ID:
-		/* read PMU chipcontrol register 3 */
-		addr = CORE_CC_REG(bus->ci->c_inf[0].base, chipcontrol_addr);
-		brcmf_sdiod_regwl(bus->sdiodev, addr, 3, NULL);
-		addr = CORE_CC_REG(bus->ci->c_inf[0].base, chipcontrol_data);
-		reg = brcmf_sdiod_regrl(bus->sdiodev, addr, NULL);
-		return (reg & pmu_cc3_mask) != 0;
-	default:
-		addr = CORE_CC_REG(bus->ci->c_inf[0].base, pmucapabilities_ext);
-		reg = brcmf_sdiod_regrl(bus->sdiodev, addr, &err);
-		if ((reg & PCAPEXT_SR_SUPPORTED_MASK) == 0)
-			return false;
-
-		addr = CORE_CC_REG(bus->ci->c_inf[0].base, retention_ctl);
-		reg = brcmf_sdiod_regrl(bus->sdiodev, addr, NULL);
-		return (reg & (PMU_RCTL_MACPHY_DISABLE_MASK |
-			       PMU_RCTL_LOGIC_DISABLE_MASK)) == 0;
-	}
-}
-
 static void brcmf_sdio_sr_init(struct brcmf_sdio *bus)
 {
 	int err = 0;
@@ -3476,7 +3466,7 @@ static int brcmf_sdio_kso_init(struct brcmf_sdio *bus)
 	brcmf_dbg(TRACE, "Enter\n");
 
 	/* KSO bit added in SDIO core rev 12 */
-	if (bus->ci->c_inf[1].rev < 12)
+	if (brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV)->rev < 12)
 		return 0;
 
 	val = brcmf_sdiod_regrb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, &err);
@@ -3507,15 +3497,13 @@ static int brcmf_sdio_bus_preinit(struct device *dev)
 	struct brcmf_sdio *bus = sdiodev->bus;
 	uint pad_size;
 	u32 value;
-	u8 idx;
 	int err;
 
 	/* the commands below use the terms tx and rx from
 	 * a device perspective, ie. bus:txglom affects the
 	 * bus transfers from device to host.
 	 */
-	idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV);
-	if (bus->ci->c_inf[idx].rev < 12) {
+	if (brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV)->rev < 12) {
 		/* for sdio core rev < 12, disable txgloming */
 		value = 0;
 		err = brcmf_iovar_data_set(dev, "bus:txglom", &value,
@@ -3626,7 +3614,7 @@ static int brcmf_sdio_bus_init(struct device *dev)
 		ret = -ENODEV;
 	}
 
-	if (brcmf_sdio_sr_capable(bus)) {
+	if (brcmf_chip_sr_capable(bus->ci)) {
 		brcmf_sdio_sr_init(bus);
 	} else {
 		/* Restore previous clock setting */
@@ -3775,30 +3763,20 @@ static void brcmf_sdio_dataworker(struct work_struct *work)
 	}
 }
 
-static char *brcmf_sdio_chip_name(uint chipid, char *buf, uint len)
-{
-	const char *fmt;
-
-	fmt = ((chipid > 0xa000) || (chipid < 0x4000)) ? "%d" : "%x";
-	snprintf(buf, len, fmt, chipid);
-	return buf;
-}
-
 static void
 brcmf_sdio_drivestrengthinit(struct brcmf_sdio_dev *sdiodev,
-				  struct brcmf_chip *ci, u32 drivestrength)
+			     struct brcmf_chip *ci, u32 drivestrength)
 {
 	const struct sdiod_drive_str *str_tab = NULL;
 	u32 str_mask;
 	u32 str_shift;
-	char chn[8];
-	u32 base = ci->c_inf[0].base;
+	u32 base;
 	u32 i;
 	u32 drivestrength_sel = 0;
 	u32 cc_data_temp;
 	u32 addr;
 
-	if (!(ci->c_inf[0].caps & CC_CAP_PMU))
+	if (!(ci->cc_caps & CC_CAP_PMU))
 		return;
 
 	switch (SDIOD_DRVSTR_KEY(ci->chip, ci->pmurev)) {
@@ -3821,8 +3799,7 @@ brcmf_sdio_drivestrengthinit(struct brcmf_sdio_dev *sdiodev,
 			str_shift = 0;
 		} else
 			brcmf_err("Invalid SDIO Drive strength for chip %s, strength=%d\n",
-				  brcmf_sdio_chip_name(ci->chip, chn, 8),
-				  drivestrength);
+				  ci->name, drivestrength);
 		break;
 	case SDIOD_DRVSTR_KEY(BCM43362_CHIP_ID, 13):
 		str_tab = sdiod_drive_strength_tab5_1v8;
@@ -3831,8 +3808,7 @@ brcmf_sdio_drivestrengthinit(struct brcmf_sdio_dev *sdiodev,
 		break;
 	default:
 		brcmf_err("No SDIO Drive strength init done for chip %s rev %d pmurev %d\n",
-			  brcmf_sdio_chip_name(ci->chip, chn, 8),
-			  ci->chiprev, ci->pmurev);
+			  ci->name, ci->chiprev, ci->pmurev);
 		break;
 	}
 
@@ -3843,6 +3819,7 @@ brcmf_sdio_drivestrengthinit(struct brcmf_sdio_dev *sdiodev,
 				break;
 			}
 		}
+		base = brcmf_chip_get_chipcommon(ci)->base;
 		addr = CORE_CC_REG(base, chipcontrol_addr);
 		brcmf_sdiod_regwl(sdiodev, addr, 1, NULL);
 		cc_data_temp = brcmf_sdiod_regrl(sdiodev, addr, NULL);
@@ -3856,8 +3833,9 @@ brcmf_sdio_drivestrengthinit(struct brcmf_sdio_dev *sdiodev,
 	}
 }
 
-int brcmf_sdio_buscoreprep(struct brcmf_sdio_dev *sdiodev)
+static int brcmf_sdio_buscoreprep(void *ctx)
 {
+	struct brcmf_sdio_dev *sdiodev = ctx;
 	int err = 0;
 	u8 clkval, clkset;
 
@@ -3900,6 +3878,55 @@ int brcmf_sdio_buscoreprep(struct brcmf_sdio_dev *sdiodev)
 	return 0;
 }
 
+static void brcmf_sdio_buscore_exitdl(void *ctx, struct brcmf_chip *chip,
+				      u32 rstvec)
+{
+	struct brcmf_sdio_dev *sdiodev = ctx;
+	struct brcmf_core *core;
+	u32 reg_addr;
+
+	/* clear all interrupts */
+	core = brcmf_chip_get_core(chip, BCMA_CORE_SDIO_DEV);
+	reg_addr = core->base + offsetof(struct sdpcmd_regs, intstatus);
+	brcmf_sdiod_regwl(sdiodev, reg_addr, 0xFFFFFFFF, NULL);
+
+	if (rstvec)
+		/* Write reset vector to address 0 */
+		brcmf_sdiod_ramrw(sdiodev, true, 0, (void *)&rstvec,
+				  sizeof(rstvec));
+}
+
+static u32 brcmf_sdio_buscore_read32(void *ctx, u32 addr)
+{
+	struct brcmf_sdio_dev *sdiodev = ctx;
+	u32 val, rev;
+
+	val = brcmf_sdiod_regrl(sdiodev, addr, NULL);
+	if (sdiodev->func[0]->device == SDIO_DEVICE_ID_BROADCOM_4335_4339 &&
+	    addr == CORE_CC_REG(SI_ENUM_BASE, chipid)) {
+		rev = (val & CID_REV_MASK) >> CID_REV_SHIFT;
+		if (rev >= 2) {
+			val &= ~CID_ID_MASK;
+			val |= BCM4339_CHIP_ID;
+		}
+	}
+	return val;
+}
+
+static void brcmf_sdio_buscore_write32(void *ctx, u32 addr, u32 val)
+{
+	struct brcmf_sdio_dev *sdiodev = ctx;
+
+	brcmf_sdiod_regwl(sdiodev, addr, val, NULL);
+}
+
+static const struct brcmf_buscore_ops brcmf_sdio_buscore_ops = {
+	.prepare = brcmf_sdio_buscoreprep,
+	.exit_dl = brcmf_sdio_buscore_exitdl,
+	.read32 = brcmf_sdio_buscore_read32,
+	.write32 = brcmf_sdio_buscore_write32,
+};
+
 static bool
 brcmf_sdio_probe_attach(struct brcmf_sdio *bus)
 {
@@ -3915,7 +3942,7 @@ brcmf_sdio_probe_attach(struct brcmf_sdio *bus)
 		 brcmf_sdiod_regrl(bus->sdiodev, SI_ENUM_BASE, NULL));
 
 	/*
-	 * Force PLL off until brcmf_sdio_chip_attach()
+	 * Force PLL off until brcmf_chip_attach()
 	 * programs PLL control regs
 	 */
 
@@ -3936,8 +3963,10 @@ brcmf_sdio_probe_attach(struct brcmf_sdio *bus)
 	 */
 	brcmf_bus_change_state(bus->sdiodev->bus_if, BRCMF_BUS_DOWN);
 
-	if (brcmf_sdio_chip_attach(bus->sdiodev, &bus->ci)) {
-		brcmf_err("brcmf_sdio_chip_attach failed!\n");
+	bus->ci = brcmf_chip_attach(bus->sdiodev, &brcmf_sdio_buscore_ops);
+	if (IS_ERR(bus->ci)) {
+		brcmf_err("brcmf_chip_attach failed!\n");
+		bus->ci = NULL;
 		goto fail;
 	}
 
@@ -3973,24 +4002,18 @@ brcmf_sdio_probe_attach(struct brcmf_sdio *bus)
 		goto fail;
 
 	/* set PMUControl so a backplane reset does PMU state reload */
-	reg_addr = CORE_CC_REG(bus->ci->c_inf[0].base,
+	reg_addr = CORE_CC_REG(brcmf_chip_get_chipcommon(bus->ci)->base,
 			       pmucontrol);
-	reg_val = brcmf_sdiod_regrl(bus->sdiodev,
-				    reg_addr,
-				    &err);
+	reg_val = brcmf_sdiod_regrl(bus->sdiodev, reg_addr, &err);
 	if (err)
 		goto fail;
 
 	reg_val |= (BCMA_CC_PMU_CTL_RES_RELOAD << BCMA_CC_PMU_CTL_RES_SHIFT);
 
-	brcmf_sdiod_regwl(bus->sdiodev,
-			  reg_addr,
-			  reg_val,
-			  &err);
+	brcmf_sdiod_regwl(bus->sdiodev, reg_addr, reg_val, &err);
 	if (err)
 		goto fail;
 
-
 	sdio_release_host(bus->sdiodev->func[1]);
 
 	brcmu_pktq_init(&bus->txq, (PRIOMASK + 1), TXQLEN);
@@ -4223,12 +4246,11 @@ void brcmf_sdio_remove(struct brcmf_sdio *bus)
 				 * all necessary cores.
 				 */
 				msleep(20);
-				brcmf_sdio_chip_enter_download(bus->sdiodev,
-							       bus->ci);
+				brcmf_chip_enter_download(bus->ci);
 				brcmf_sdio_clkctl(bus, CLK_NONE, false);
 				sdio_release_host(bus->sdiodev->func[1]);
 			}
-			brcmf_sdio_chip_detach(&bus->ci);
+			brcmf_chip_detach(bus->ci);
 		}
 
 		brcmu_pkt_buf_free_skb(bus->txglom_sgpad);
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
index 396c06cea8ef..5e53eb1b2ffa 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
@@ -182,6 +182,95 @@ struct brcmf_sdio_dev {
 	uint max_segment_size;
 };
 
+/* sdio core registers */
+struct sdpcmd_regs {
+	u32 corecontrol;		/* 0x00, rev8 */
+	u32 corestatus;			/* rev8 */
+	u32 PAD[1];
+	u32 biststatus;			/* rev8 */
+
+	/* PCMCIA access */
+	u16 pcmciamesportaladdr;	/* 0x010, rev8 */
+	u16 PAD[1];
+	u16 pcmciamesportalmask;	/* rev8 */
+	u16 PAD[1];
+	u16 pcmciawrframebc;		/* rev8 */
+	u16 PAD[1];
+	u16 pcmciaunderflowtimer;	/* rev8 */
+	u16 PAD[1];
+
+	/* interrupt */
+	u32 intstatus;			/* 0x020, rev8 */
+	u32 hostintmask;		/* rev8 */
+	u32 intmask;			/* rev8 */
+	u32 sbintstatus;		/* rev8 */
+	u32 sbintmask;			/* rev8 */
+	u32 funcintmask;		/* rev4 */
+	u32 PAD[2];
+	u32 tosbmailbox;		/* 0x040, rev8 */
+	u32 tohostmailbox;		/* rev8 */
+	u32 tosbmailboxdata;		/* rev8 */
+	u32 tohostmailboxdata;		/* rev8 */
+
+	/* synchronized access to registers in SDIO clock domain */
+	u32 sdioaccess;			/* 0x050, rev8 */
+	u32 PAD[3];
+
+	/* PCMCIA frame control */
+	u8 pcmciaframectrl;		/* 0x060, rev8 */
+	u8 PAD[3];
+	u8 pcmciawatermark;		/* rev8 */
+	u8 PAD[155];
+
+	/* interrupt batching control */
+	u32 intrcvlazy;			/* 0x100, rev8 */
+	u32 PAD[3];
+
+	/* counters */
+	u32 cmd52rd;			/* 0x110, rev8 */
+	u32 cmd52wr;			/* rev8 */
+	u32 cmd53rd;			/* rev8 */
+	u32 cmd53wr;			/* rev8 */
+	u32 abort;			/* rev8 */
+	u32 datacrcerror;		/* rev8 */
+	u32 rdoutofsync;		/* rev8 */
+	u32 wroutofsync;		/* rev8 */
+	u32 writebusy;			/* rev8 */
+	u32 readwait;			/* rev8 */
+	u32 readterm;			/* rev8 */
+	u32 writeterm;			/* rev8 */
+	u32 PAD[40];
+	u32 clockctlstatus;		/* rev8 */
+	u32 PAD[7];
+
+	u32 PAD[128];			/* DMA engines */
+
+	/* SDIO/PCMCIA CIS region */
+	char cis[512];			/* 0x400-0x5ff, rev6 */
+
+	/* PCMCIA function control registers */
+	char pcmciafcr[256];		/* 0x600-6ff, rev6 */
+	u16 PAD[55];
+
+	/* PCMCIA backplane access */
+	u16 backplanecsr;		/* 0x76E, rev6 */
+	u16 backplaneaddr0;		/* rev6 */
+	u16 backplaneaddr1;		/* rev6 */
+	u16 backplaneaddr2;		/* rev6 */
+	u16 backplaneaddr3;		/* rev6 */
+	u16 backplanedata0;		/* rev6 */
+	u16 backplanedata1;		/* rev6 */
+	u16 backplanedata2;		/* rev6 */
+	u16 backplanedata3;		/* rev6 */
+	u16 PAD[31];
+
+	/* sprom "size" & "blank" info */
+	u16 spromstatus;		/* 0x7BE, rev2 */
+	u32 PAD[464];
+
+	u16 PAD[0x80];
+};
+
 /* Register/deregister interrupt handler. */
 int brcmf_sdiod_intr_register(struct brcmf_sdio_dev *sdiodev);
 int brcmf_sdiod_intr_unregister(struct brcmf_sdio_dev *sdiodev);
@@ -239,6 +328,5 @@ void brcmf_sdio_remove(struct brcmf_sdio *bus);
 void brcmf_sdio_isr(struct brcmf_sdio *bus);
 
 void brcmf_sdio_wd_timer(struct brcmf_sdio *bus, uint wdtick);
-int brcmf_sdio_buscoreprep(struct brcmf_sdio_dev *sdiodev);
 
 #endif				/* _BRCM_SDH_H_ */
-- 
cgit v1.2.2


From 82030d6df3856896e6a7c912347fe547eaf61738 Mon Sep 17 00:00:00 2001
From: Arend van Spriel <arend@broadcom.com>
Date: Wed, 29 Jan 2014 15:32:20 +0100
Subject: brcmfmac: remove TRACE level debug message from
 brcmf_sdio_bus_sleep()

The function brcmf_sdio_bus_sleep() function is called rather
frequently, which fills the log when TRACE level is enabled. Reduced
the level to SDIO.

Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index 3056f1173c67..631d5dc5b6d5 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -971,8 +971,8 @@ static int
 brcmf_sdio_bus_sleep(struct brcmf_sdio *bus, bool sleep, bool pendok)
 {
 	int err = 0;
-	brcmf_dbg(TRACE, "Enter\n");
-	brcmf_dbg(SDIO, "request %s currently %s\n",
+
+	brcmf_dbg(SDIO, "Enter: request %s currently %s\n",
 		  (sleep ? "SLEEP" : "WAKE"),
 		  (bus->sleeping ? "SLEEP" : "WAKE"));
 
-- 
cgit v1.2.2


From c5a9f3c1931902ee161b264dd3bdee3ead03095b Mon Sep 17 00:00:00 2001
From: Arend van Spriel <arend@broadcom.com>
Date: Wed, 29 Jan 2014 15:32:21 +0100
Subject: brcmfmac: remove unintended error logging

In brcmf_contstruct_reginfo() some error logging was added by:

  commit f7c51a1a72f50870f80001ddf528a6f7f992bc16
  Author: Arend van Spriel <arend@broadcom.com>
  Date:   Wed Dec 11 16:21:21 2013 +0100

      brcmfmac: correct reporting HT40 support in wiphy htcap

This logging was not intended to be delivered and adds a lot
of messages in the log. The patch removes this logging statement.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 3 ---
 1 file changed, 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
index 616b37824d33..6dc718bf3be3 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
@@ -5192,9 +5192,6 @@ static s32 brcmf_construct_reginfo(struct brcmf_cfg80211_info *cfg,
 				ieee80211_channel_to_frequency(ch.chnum, band);
 			band_chan_arr[index].hw_value = ch.chnum;
 
-			brcmf_err("channel %d: f=%d bw=%d sb=%d\n",
-				  ch.chnum, band_chan_arr[index].center_freq,
-				  ch.bw, ch.sb);
 			if (ch.bw == BRCMU_CHAN_BW_40) {
 				/* assuming the order is HT20, HT40 Upper,
 				 * HT40 lower from chanspecs
-- 
cgit v1.2.2


From 4aa2c47cd60fa2ed8652f78d35286b639d00120c Mon Sep 17 00:00:00 2001
From: Arend van Spriel <arend@broadcom.com>
Date: Wed, 29 Jan 2014 15:32:22 +0100
Subject: brcmfmac: get chip core information from the device

Instead of instantiating core info structs based upon the
chip identifier it is now done parsing information provided
on the device.

Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/chip.c | 307 ++++++++++++++++---------
 1 file changed, 203 insertions(+), 104 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/chip.c b/drivers/net/wireless/brcm80211/brcmfmac/chip.c
index 151a67110ecf..724a40fd6711 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/chip.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.c
@@ -32,6 +32,55 @@
 #define SOCI_SB		0
 #define SOCI_AI		1
 
+/* PL-368 DMP definitions */
+#define DMP_DESC_TYPE_MSK	0x0000000F
+#define  DMP_DESC_EMPTY		0x00000000
+#define  DMP_DESC_VALID		0x00000001
+#define  DMP_DESC_COMPONENT	0x00000001
+#define  DMP_DESC_MASTER_PORT	0x00000003
+#define  DMP_DESC_ADDRESS	0x00000005
+#define  DMP_DESC_ADDRSIZE_GT32	0x00000008
+#define  DMP_DESC_EOT		0x0000000F
+
+#define DMP_COMP_DESIGNER	0xFFF00000
+#define DMP_COMP_DESIGNER_S	20
+#define DMP_COMP_PARTNUM	0x000FFF00
+#define DMP_COMP_PARTNUM_S	8
+#define DMP_COMP_CLASS		0x000000F0
+#define DMP_COMP_CLASS_S	4
+#define DMP_COMP_REVISION	0xFF000000
+#define DMP_COMP_REVISION_S	24
+#define DMP_COMP_NUM_SWRAP	0x00F80000
+#define DMP_COMP_NUM_SWRAP_S	19
+#define DMP_COMP_NUM_MWRAP	0x0007C000
+#define DMP_COMP_NUM_MWRAP_S	14
+#define DMP_COMP_NUM_SPORT	0x00003E00
+#define DMP_COMP_NUM_SPORT_S	9
+#define DMP_COMP_NUM_MPORT	0x000001F0
+#define DMP_COMP_NUM_MPORT_S	4
+
+#define DMP_MASTER_PORT_UID	0x0000FF00
+#define DMP_MASTER_PORT_UID_S	8
+#define DMP_MASTER_PORT_NUM	0x000000F0
+#define DMP_MASTER_PORT_NUM_S	4
+
+#define DMP_SLAVE_ADDR_BASE	0xFFFFF000
+#define DMP_SLAVE_ADDR_BASE_S	12
+#define DMP_SLAVE_PORT_NUM	0x00000F00
+#define DMP_SLAVE_PORT_NUM_S	8
+#define DMP_SLAVE_TYPE		0x000000C0
+#define DMP_SLAVE_TYPE_S	6
+#define  DMP_SLAVE_TYPE_SLAVE	0
+#define  DMP_SLAVE_TYPE_BRIDGE	1
+#define  DMP_SLAVE_TYPE_SWRAP	2
+#define  DMP_SLAVE_TYPE_MWRAP	3
+#define DMP_SLAVE_SIZE_TYPE	0x00000030
+#define DMP_SLAVE_SIZE_TYPE_S	4
+#define  DMP_SLAVE_SIZE_4K	0
+#define  DMP_SLAVE_SIZE_8K	1
+#define  DMP_SLAVE_SIZE_16K	2
+#define  DMP_SLAVE_SIZE_DESC	3
+
 /* EROM CompIdentB */
 #define CIB_REV_MASK		0xff000000
 #define CIB_REV_SHIFT		24
@@ -393,8 +442,9 @@ static int brcmf_chip_cores_check(struct brcmf_chip_priv *ci)
 	int idx = 1;
 
 	list_for_each_entry(core, &ci->cores, list) {
-		brcmf_dbg(INFO, " [%-2d] core 0x%x rev %-2d base 0x%08x\n",
-			  idx++, core->pub.id, core->pub.rev, core->pub.base);
+		brcmf_dbg(INFO, " [%-2d] core 0x%x:%-2d base 0x%08x wrap 0x%08x\n",
+			  idx++, core->pub.id, core->pub.rev, core->pub.base,
+			  core->wrapbase);
 
 		switch (core->pub.id) {
 		case BCMA_CORE_ARM_CM3:
@@ -463,6 +513,151 @@ static void brcmf_chip_get_raminfo(struct brcmf_chip_priv *ci)
 	}
 }
 
+static u32 brcmf_chip_dmp_get_desc(struct brcmf_chip_priv *ci, u32 *eromaddr,
+				   u8 *type)
+{
+	u32 val;
+
+	/* read next descriptor */
+	val = ci->ops->read32(ci->ctx, *eromaddr);
+	*eromaddr += 4;
+
+	if (!type)
+		return val;
+
+	/* determine descriptor type */
+	*type = (val & DMP_DESC_TYPE_MSK);
+	if ((*type & ~DMP_DESC_ADDRSIZE_GT32) == DMP_DESC_ADDRESS)
+		*type = DMP_DESC_ADDRESS;
+
+	return val;
+}
+
+static int brcmf_chip_dmp_get_regaddr(struct brcmf_chip_priv *ci, u32 *eromaddr,
+				      u32 *regbase, u32 *wrapbase)
+{
+	u8 desc;
+	u32 val;
+	u8 mpnum = 0;
+	u8 stype, sztype, wraptype;
+
+	*regbase = 0;
+	*wrapbase = 0;
+
+	val = brcmf_chip_dmp_get_desc(ci, eromaddr, &desc);
+	if (desc == DMP_DESC_MASTER_PORT) {
+		mpnum = (val & DMP_MASTER_PORT_NUM) >> DMP_MASTER_PORT_NUM_S;
+		wraptype = DMP_SLAVE_TYPE_MWRAP;
+	} else if (desc == DMP_DESC_ADDRESS) {
+		/* revert erom address */
+		*eromaddr -= 4;
+		wraptype = DMP_SLAVE_TYPE_SWRAP;
+	} else {
+		*eromaddr -= 4;
+		return -EILSEQ;
+	}
+
+	do {
+		/* locate address descriptor */
+		do {
+			val = brcmf_chip_dmp_get_desc(ci, eromaddr, &desc);
+			/* unexpected table end */
+			if (desc == DMP_DESC_EOT) {
+				*eromaddr -= 4;
+				return -EFAULT;
+			}
+		} while (desc != DMP_DESC_ADDRESS);
+
+		/* skip upper 32-bit address descriptor */
+		if (val & DMP_DESC_ADDRSIZE_GT32)
+			brcmf_chip_dmp_get_desc(ci, eromaddr, NULL);
+
+		sztype = (val & DMP_SLAVE_SIZE_TYPE) >> DMP_SLAVE_SIZE_TYPE_S;
+
+		/* next size descriptor can be skipped */
+		if (sztype == DMP_SLAVE_SIZE_DESC) {
+			val = brcmf_chip_dmp_get_desc(ci, eromaddr, NULL);
+			/* skip upper size descriptor if present */
+			if (val & DMP_DESC_ADDRSIZE_GT32)
+				brcmf_chip_dmp_get_desc(ci, eromaddr, NULL);
+		}
+
+		/* only look for 4K register regions */
+		if (sztype != DMP_SLAVE_SIZE_4K)
+			continue;
+
+		stype = (val & DMP_SLAVE_TYPE) >> DMP_SLAVE_TYPE_S;
+
+		/* only regular slave and wrapper */
+		if (*regbase == 0 && stype == DMP_SLAVE_TYPE_SLAVE)
+			*regbase = val & DMP_SLAVE_ADDR_BASE;
+		if (*wrapbase == 0 && stype == wraptype)
+			*wrapbase = val & DMP_SLAVE_ADDR_BASE;
+	} while (*regbase == 0 || *wrapbase == 0);
+
+	return 0;
+}
+
+static
+int brcmf_chip_dmp_erom_scan(struct brcmf_chip_priv *ci)
+{
+	struct brcmf_core *core;
+	u32 eromaddr;
+	u8 desc_type = 0;
+	u32 val;
+	u16 id;
+	u8 nmp, nsp, nmw, nsw, rev;
+	u32 base, wrap;
+	int err;
+
+	eromaddr = ci->ops->read32(ci->ctx, CORE_CC_REG(SI_ENUM_BASE, eromptr));
+
+	while (desc_type != DMP_DESC_EOT) {
+		val = brcmf_chip_dmp_get_desc(ci, &eromaddr, &desc_type);
+		if (!(val & DMP_DESC_VALID))
+			continue;
+
+		if (desc_type == DMP_DESC_EMPTY)
+			continue;
+
+		/* need a component descriptor */
+		if (desc_type != DMP_DESC_COMPONENT)
+			continue;
+
+		id = (val & DMP_COMP_PARTNUM) >> DMP_COMP_PARTNUM_S;
+
+		/* next descriptor must be component as well */
+		val = brcmf_chip_dmp_get_desc(ci, &eromaddr, &desc_type);
+		if (WARN_ON((val & DMP_DESC_TYPE_MSK) != DMP_DESC_COMPONENT))
+			return -EFAULT;
+
+		/* only look at cores with master port(s) */
+		nmp = (val & DMP_COMP_NUM_MPORT) >> DMP_COMP_NUM_MPORT_S;
+		nsp = (val & DMP_COMP_NUM_SPORT) >> DMP_COMP_NUM_SPORT_S;
+		nmw = (val & DMP_COMP_NUM_MWRAP) >> DMP_COMP_NUM_MWRAP_S;
+		nsw = (val & DMP_COMP_NUM_SWRAP) >> DMP_COMP_NUM_SWRAP_S;
+		rev = (val & DMP_COMP_REVISION) >> DMP_COMP_REVISION_S;
+
+		/* need core with ports */
+		if (nmw + nsw == 0)
+			continue;
+
+		/* try to obtain register address info */
+		err = brcmf_chip_dmp_get_regaddr(ci, &eromaddr, &base, &wrap);
+		if (err)
+			continue;
+
+		/* finally a core to be added */
+		core = brcmf_chip_add_core(ci, id, base, wrap);
+		if (IS_ERR(core))
+			return PTR_ERR(core);
+
+		core->rev = rev;
+	}
+
+	return 0;
+}
+
 static int brcmf_chip_recognition(struct brcmf_chip_priv *ci)
 {
 	struct brcmf_core *core;
@@ -505,114 +700,21 @@ static int brcmf_chip_recognition(struct brcmf_chip_priv *ci)
 		core = brcmf_chip_add_core(ci, BCMA_CORE_ARM_CM3,
 					   BCM4329_CORE_ARM_BASE, 0);
 		brcmf_chip_sb_corerev(ci, core);
+
+		core = brcmf_chip_add_core(ci, BCMA_CORE_80211, 0x18001000, 0);
+		brcmf_chip_sb_corerev(ci, core);
 	} else if (socitype == SOCI_AI) {
 		ci->iscoreup = brcmf_chip_ai_iscoreup;
 		ci->coredisable = brcmf_chip_ai_coredisable;
 		ci->resetcore = brcmf_chip_ai_resetcore;
 
-		core = brcmf_chip_add_core(ci, BCMA_CORE_CHIPCOMMON,
-					   SI_ENUM_BASE,
-					   SI_ENUM_BASE + 0x100000);
-
-		/* Address of cores for new chips should be added here */
-		switch (ci->pub.chip) {
-		case BCM43143_CHIP_ID:
-			core->rev = 43;
-			core = brcmf_chip_add_core(ci, BCMA_CORE_SDIO_DEV,
-						   BCM43143_CORE_BUS_BASE,
-						   BCM43143_CORE_BUS_BASE +
-						   0x100000);
-			core->rev = 24;
-			core = brcmf_chip_add_core(ci, BCMA_CORE_INTERNAL_MEM,
-						   BCM43143_CORE_SOCRAM_BASE,
-						   BCM43143_CORE_SOCRAM_BASE +
-						   0x100000);
-			core->rev = 20;
-			core = brcmf_chip_add_core(ci, BCMA_CORE_ARM_CM3,
-						   BCM43143_CORE_ARM_BASE,
-						   BCM43143_CORE_ARM_BASE +
-						   0x100000);
-			core->rev = 7;
-			break;
-		case BCM43241_CHIP_ID:
-			core->rev = 42;
-			core = brcmf_chip_add_core(ci, BCMA_CORE_SDIO_DEV,
-						   0x18002000, 0x18102000);
-			core->rev = 14;
-			core = brcmf_chip_add_core(ci, BCMA_CORE_INTERNAL_MEM,
-						   0x18004000, 0x18104000);
-			core->rev = 20;
-			core = brcmf_chip_add_core(ci, BCMA_CORE_ARM_CM3,
-						   0x18003000, 0x18103000);
-			core->rev = 7;
-			break;
-		case BCM4330_CHIP_ID:
-			core->rev = 39;
-			core = brcmf_chip_add_core(ci, BCMA_CORE_SDIO_DEV,
-						   0x18002000, 0x18102000);
-			core->rev = 7;
-			core = brcmf_chip_add_core(ci, BCMA_CORE_INTERNAL_MEM,
-						   0x18004000, 0x18104000);
-			core->rev = 13;
-			core = brcmf_chip_add_core(ci, BCMA_CORE_ARM_CM3,
-						   0x18003000, 0x18103000);
-			core->rev = 3;
-			break;
-		case BCM4334_CHIP_ID:
-			core->rev = 41;
-			core = brcmf_chip_add_core(ci, BCMA_CORE_SDIO_DEV,
-						   0x18002000, 0x18102000);
-			core->rev = 13;
-			core = brcmf_chip_add_core(ci, BCMA_CORE_INTERNAL_MEM,
-						   0x18004000, 0x18104000);
-			core->rev = 19;
-			core = brcmf_chip_add_core(ci, BCMA_CORE_ARM_CM3,
-						   0x18003000, 0x18103000);
-			core->rev = 7;
-			break;
-		case BCM4335_CHIP_ID:
-			core->rev = 43;
-			core = brcmf_chip_add_core(ci, BCMA_CORE_SDIO_DEV,
-						   0x18005000, 0x18105000);
-			core->rev = 15;
-			core = brcmf_chip_add_core(ci, BCMA_CORE_ARM_CR4,
-						   0x18002000, 0x18102000);
-			core->rev = 1;
-			break;
-		case BCM43362_CHIP_ID:
-			core->rev = 39;
-			core = brcmf_chip_add_core(ci, BCMA_CORE_SDIO_DEV,
-						   0x18002000, 0x18102000);
-			core->rev = 10;
-			core = brcmf_chip_add_core(ci, BCMA_CORE_INTERNAL_MEM,
-						   0x18004000, 0x18104000);
-			core->rev = 8;
-			core = brcmf_chip_add_core(ci, BCMA_CORE_ARM_CM3,
-						   0x18003000, 0x18103000);
-			core->rev = 3;
-			break;
-		case BCM4339_CHIP_ID:
-			core->rev = 46;
-			core = brcmf_chip_add_core(ci, BCMA_CORE_SDIO_DEV,
-						   0x18005000, 0x18105000);
-			core->rev = 21;
-			core = brcmf_chip_add_core(ci, BCMA_CORE_ARM_CR4,
-						   0x18002000, 0x18102000);
-			core->rev = 4;
-			break;
-		default:
-			brcmf_err("AXI chip is not supported\n");
-			return -ENODEV;
-		}
+		brcmf_chip_dmp_erom_scan(ci);
 	} else {
 		brcmf_err("chip backplane type %u is not supported\n",
 			  socitype);
 		return -ENODEV;
 	}
 
-	/* add 802.11 core for all chips on same backplane address */
-	core = brcmf_chip_add_core(ci, BCMA_CORE_80211, 0x18001000, 0x18101000);
-
 	brcmf_chip_get_raminfo(ci);
 
 	return brcmf_chip_cores_check(ci);
@@ -652,7 +754,6 @@ static int brcmf_chip_setup(struct brcmf_chip_priv *chip)
 {
 	struct brcmf_chip *pub;
 	struct brcmf_core_priv *cc;
-	struct brcmf_core_priv *bus;
 	u32 base;
 	u32 val;
 	int ret = 0;
@@ -673,10 +774,8 @@ static int brcmf_chip_setup(struct brcmf_chip_priv *chip)
 		pub->pmucaps = val;
 	}
 
-	bus = list_next_entry(cc, list);
-
-	brcmf_dbg(INFO, "ccrev=%d, pmurev=%d, buscore rev/type=%d/0x%x\n",
-		  cc->pub.rev, pub->pmurev, bus->pub.rev, bus->pub.id);
+	brcmf_dbg(INFO, "ccrev=%d, pmurev=%d, pmucaps=0x%x\n",
+		  cc->pub.rev, pub->pmurev, pub->pmucaps);
 
 	/* execute bus core specific setup */
 	if (chip->ops->setup)
-- 
cgit v1.2.2


From 787eb033f9950788f7fc520e8532b85a86d3ca02 Mon Sep 17 00:00:00 2001
From: Daniel Kim <dekim@broadcom.com>
Date: Wed, 29 Jan 2014 15:32:23 +0100
Subject: brcmfmac: correct setting of WEP broadcast/unicast keys

The brcmf_add_keyext() is for setting per-station key for cipher
algorithms such as WPA1/WPA2 and should not be used to set
WEP broadcast/unicast keys. This patch fixes connect failure
problem with AP using 802.1x-WEP.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Signed-off-by: Daniel Kim <dekim@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
index 6dc718bf3be3..a54db9185747 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
@@ -1980,7 +1980,9 @@ brcmf_cfg80211_add_key(struct wiphy *wiphy, struct net_device *ndev,
 	if (!check_vif_up(ifp->vif))
 		return -EIO;
 
-	if (mac_addr) {
+	if (mac_addr &&
+		(params->cipher != WLAN_CIPHER_SUITE_WEP40) &&
+		(params->cipher != WLAN_CIPHER_SUITE_WEP104)) {
 		brcmf_dbg(TRACE, "Exit");
 		return brcmf_add_keyext(wiphy, ndev, key_idx, mac_addr, params);
 	}
-- 
cgit v1.2.2


From 2da5cb297918f4f2321a8e4e8fe25a6b472c69fc Mon Sep 17 00:00:00 2001
From: Arend van Spriel <arend@broadcom.com>
Date: Wed, 29 Jan 2014 15:32:24 +0100
Subject: brcmfmac: CR4 takes precedence over CM3 in
 brcmf_chip_enter_download()

In the enter and exit download sequence the chip core info was checked
for presence of CM3 ARM core. If found it would enter download state for
the CM3. However, on devices that have a CM3 and CR4 this is not correct
and the CR4 should be used to enter download state. This patch changes
the ARM core lookup giving CR4 precedence.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/chip.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/chip.c b/drivers/net/wireless/brcm80211/brcmfmac/chip.c
index 724a40fd6711..a07b95ef9e70 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/chip.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.c
@@ -967,13 +967,13 @@ void brcmf_chip_enter_download(struct brcmf_chip *pub)
 	brcmf_dbg(TRACE, "Enter\n");
 
 	chip = container_of(pub, struct brcmf_chip_priv, pub);
-	arm = brcmf_chip_get_core(pub, BCMA_CORE_ARM_CM3);
+	arm = brcmf_chip_get_core(pub, BCMA_CORE_ARM_CR4);
 	if (arm) {
-		brcmf_chip_cm3_enterdl(chip);
+		brcmf_chip_cr4_enterdl(chip);
 		return;
 	}
 
-	brcmf_chip_cr4_enterdl(chip);
+	brcmf_chip_cm3_enterdl(chip);
 }
 
 bool brcmf_chip_exit_download(struct brcmf_chip *pub, u32 rstvec)
@@ -984,11 +984,11 @@ bool brcmf_chip_exit_download(struct brcmf_chip *pub, u32 rstvec)
 	brcmf_dbg(TRACE, "Enter\n");
 
 	chip = container_of(pub, struct brcmf_chip_priv, pub);
-	arm = brcmf_chip_get_core(pub, BCMA_CORE_ARM_CM3);
+	arm = brcmf_chip_get_core(pub, BCMA_CORE_ARM_CR4);
 	if (arm)
-		return brcmf_chip_cm3_exitdl(chip);
+		return brcmf_chip_cr4_exitdl(chip, rstvec);
 
-	return brcmf_chip_cr4_exitdl(chip, rstvec);
+	return brcmf_chip_cm3_exitdl(chip);
 }
 
 bool brcmf_chip_sr_capable(struct brcmf_chip *pub)
-- 
cgit v1.2.2


From 45cfc51681287482c8b9843a20d6b4d06555ff62 Mon Sep 17 00:00:00 2001
From: Stanislaw Gruszka <sgruszka@redhat.com>
Date: Fri, 31 Jan 2014 13:18:09 +0100
Subject: rt2x00: move frequent messages to debug level

On commit 28f2bce9f8bbf704c86f8c684337f82c51592c81 I make change that
print various messages as default. This can cause flood of messages
related to TX status timeout on some environments. I partially fixed
problem on commit bb9c298f3193ac5b80e47b325c690700580b6bcf, but forgot
to move two more messages to debug level.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2800usb.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index caddc1b427a9..14a90ddf585c 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -125,9 +125,9 @@ static inline bool rt2800usb_entry_txstatus_timeout(struct queue_entry *entry)
 
 	tout = time_after(jiffies, entry->last_action + msecs_to_jiffies(100));
 	if (unlikely(tout))
-		rt2x00_warn(entry->queue->rt2x00dev,
-			    "TX status timeout for entry %d in queue %d\n",
-			    entry->entry_idx, entry->queue->qid);
+		rt2x00_dbg(entry->queue->rt2x00dev,
+			   "TX status timeout for entry %d in queue %d\n",
+			   entry->entry_idx, entry->queue->qid);
 	return tout;
 
 }
@@ -566,8 +566,8 @@ static void rt2800usb_txdone(struct rt2x00_dev *rt2x00dev)
 		queue = rt2x00queue_get_tx_queue(rt2x00dev, qid);
 
 		if (unlikely(rt2x00queue_empty(queue))) {
-			rt2x00_warn(rt2x00dev, "Got TX status for an empty queue %u, dropping\n",
-				    qid);
+			rt2x00_dbg(rt2x00dev, "Got TX status for an empty queue %u, dropping\n",
+				   qid);
 			break;
 		}
 
-- 
cgit v1.2.2


From 2f2cb326f9fb8eee6ebbe134261d39506f9fa59a Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@rempel-privat.de>
Date: Tue, 4 Feb 2014 10:27:38 +0100
Subject: ath: add last_rssi to ath_common

we need access to this variable from common functions.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath.h | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath.h b/drivers/net/wireless/ath/ath.h
index b59cfbe0276b..6260b834a86f 100644
--- a/drivers/net/wireless/ath/ath.h
+++ b/drivers/net/wireless/ath/ath.h
@@ -161,6 +161,8 @@ struct ath_common {
 	bool btcoex_enabled;
 	bool disable_ani;
 	bool bt_ant_diversity;
+
+	int last_rssi;
 };
 
 struct sk_buff *ath_rxbuf_alloc(struct ath_common *common,
-- 
cgit v1.2.2


From 32efb0cc5b614d1ca6c1804107270154c318709a Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@rempel-privat.de>
Date: Tue, 4 Feb 2014 10:27:39 +0100
Subject: ath9k: move ath9k_process_rssi to common.c

we can reuse this fucntion on ath9k_htc.
Now we will need to use common version last_rssi, so switch
it too.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ath9k.h  |  1 -
 drivers/net/wireless/ath/ath9k/common.c | 62 ++++++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath9k/common.h |  4 +++
 drivers/net/wireless/ath/ath9k/init.c   |  2 +-
 drivers/net/wireless/ath/ath9k/main.c   |  2 +-
 drivers/net/wireless/ath/ath9k/recv.c   | 64 +--------------------------------
 6 files changed, 69 insertions(+), 66 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 7fde8ecb6ea1..ff3747c2fc08 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -758,7 +758,6 @@ struct ath_softc {
 #endif
 
 	struct ath9k_hw_cal_data caldata;
-	int last_rssi;
 
 #ifdef CONFIG_ATH9K_DEBUGFS
 	struct ath9k_debug debug;
diff --git a/drivers/net/wireless/ath/ath9k/common.c b/drivers/net/wireless/ath/ath9k/common.c
index 768c733cad31..7028c52fe32e 100644
--- a/drivers/net/wireless/ath/ath9k/common.c
+++ b/drivers/net/wireless/ath/ath9k/common.c
@@ -27,6 +27,68 @@ MODULE_AUTHOR("Atheros Communications");
 MODULE_DESCRIPTION("Shared library for Atheros wireless 802.11n LAN cards.");
 MODULE_LICENSE("Dual BSD/GPL");
 
+void ath9k_cmn_process_rssi(struct ath_common *common,
+			    struct ieee80211_hw *hw,
+			    struct ath_rx_status *rx_stats,
+			    struct ieee80211_rx_status *rxs)
+{
+	struct ath_hw *ah = common->ah;
+	int last_rssi;
+	int rssi = rx_stats->rs_rssi;
+	int i, j;
+
+	/*
+	 * RSSI is not available for subframes in an A-MPDU.
+	 */
+	if (rx_stats->rs_moreaggr) {
+		rxs->flag |= RX_FLAG_NO_SIGNAL_VAL;
+		return;
+	}
+
+	/*
+	 * Check if the RSSI for the last subframe in an A-MPDU
+	 * or an unaggregated frame is valid.
+	 */
+	if (rx_stats->rs_rssi == ATH9K_RSSI_BAD) {
+		rxs->flag |= RX_FLAG_NO_SIGNAL_VAL;
+		return;
+	}
+
+	for (i = 0, j = 0; i < ARRAY_SIZE(rx_stats->rs_rssi_ctl); i++) {
+		s8 rssi;
+
+		if (!(ah->rxchainmask & BIT(i)))
+			continue;
+
+		rssi = rx_stats->rs_rssi_ctl[i];
+		if (rssi != ATH9K_RSSI_BAD) {
+		    rxs->chains |= BIT(j);
+		    rxs->chain_signal[j] = ah->noise + rssi;
+		}
+		j++;
+	}
+
+	/*
+	 * Update Beacon RSSI, this is used by ANI.
+	 */
+	if (rx_stats->is_mybeacon &&
+	    ((ah->opmode == NL80211_IFTYPE_STATION) ||
+	     (ah->opmode == NL80211_IFTYPE_ADHOC))) {
+		ATH_RSSI_LPF(common->last_rssi, rx_stats->rs_rssi);
+		last_rssi = common->last_rssi;
+
+		if (likely(last_rssi != ATH_RSSI_DUMMY_MARKER))
+			rssi = ATH_EP_RND(last_rssi, ATH_RSSI_EP_MULTIPLIER);
+		if (rssi < 0)
+			rssi = 0;
+
+		ah->stats.avgbrssi = rssi;
+	}
+
+	rxs->signal = ah->noise + rx_stats->rs_rssi;
+}
+EXPORT_SYMBOL(ath9k_cmn_process_rssi);
+
 int ath9k_cmn_get_hw_crypto_keytype(struct sk_buff *skb)
 {
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
diff --git a/drivers/net/wireless/ath/ath9k/common.h b/drivers/net/wireless/ath/ath9k/common.h
index eb85e1bdca88..aaf4a9b5ad99 100644
--- a/drivers/net/wireless/ath/ath9k/common.h
+++ b/drivers/net/wireless/ath/ath9k/common.h
@@ -42,6 +42,10 @@
 #define ATH_EP_RND(x, mul) 						\
 	(((x) + ((mul)/2)) / (mul))
 
+void ath9k_cmn_process_rssi(struct ath_common *common,
+			    struct ieee80211_hw *hw,
+			    struct ath_rx_status *rx_stats,
+			    struct ieee80211_rx_status *rxs);
 int ath9k_cmn_get_hw_crypto_keytype(struct sk_buff *skb);
 struct ath9k_channel *ath9k_cmn_get_channel(struct ieee80211_hw *hw,
 					    struct ath_hw *ah,
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index c36de303c8f3..00e0f606a0d3 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -534,7 +534,7 @@ static void ath9k_init_misc(struct ath_softc *sc)
 
 	setup_timer(&common->ani.timer, ath_ani_calibrate, (unsigned long)sc);
 
-	sc->last_rssi = ATH_RSSI_DUMMY_MARKER;
+	common->last_rssi = ATH_RSSI_DUMMY_MARKER;
 	sc->config.txpowlimit = ATH_TXPOWER_MAX;
 	memcpy(common->bssidmask, ath_bcast_mac, ETH_ALEN);
 	sc->beacon.slottime = ATH9K_SLOT_TIME_9;
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 4486e3763919..afce549a097b 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1606,7 +1606,7 @@ static void ath9k_set_assoc_state(struct ath_softc *sc,
 	common->curaid = bss_conf->aid;
 	ath9k_hw_write_associd(sc->sc_ah);
 
-	sc->last_rssi = ATH_RSSI_DUMMY_MARKER;
+	common->last_rssi = ATH_RSSI_DUMMY_MARKER;
 	sc->sc_ah->stats.avgbrssi = ATH_RSSI_DUMMY_MARKER;
 
 	spin_lock_irqsave(&sc->sc_pm_lock, flags);
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index a0ebdd000fc2..5229e63ffbbd 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -891,68 +891,6 @@ static int ath9k_process_rate(struct ath_common *common,
 	return -EINVAL;
 }
 
-static void ath9k_process_rssi(struct ath_common *common,
-			       struct ieee80211_hw *hw,
-			       struct ath_rx_status *rx_stats,
-			       struct ieee80211_rx_status *rxs)
-{
-	struct ath_softc *sc = hw->priv;
-	struct ath_hw *ah = common->ah;
-	int last_rssi;
-	int rssi = rx_stats->rs_rssi;
-	int i, j;
-
-	/*
-	 * RSSI is not available for subframes in an A-MPDU.
-	 */
-	if (rx_stats->rs_moreaggr) {
-		rxs->flag |= RX_FLAG_NO_SIGNAL_VAL;
-		return;
-	}
-
-	/*
-	 * Check if the RSSI for the last subframe in an A-MPDU
-	 * or an unaggregated frame is valid.
-	 */
-	if (rx_stats->rs_rssi == ATH9K_RSSI_BAD) {
-		rxs->flag |= RX_FLAG_NO_SIGNAL_VAL;
-		return;
-	}
-
-	for (i = 0, j = 0; i < ARRAY_SIZE(rx_stats->rs_rssi_ctl); i++) {
-		s8 rssi;
-
-		if (!(ah->rxchainmask & BIT(i)))
-			continue;
-
-		rssi = rx_stats->rs_rssi_ctl[i];
-		if (rssi != ATH9K_RSSI_BAD) {
-		    rxs->chains |= BIT(j);
-		    rxs->chain_signal[j] = ah->noise + rssi;
-		}
-		j++;
-	}
-
-	/*
-	 * Update Beacon RSSI, this is used by ANI.
-	 */
-	if (rx_stats->is_mybeacon &&
-	    ((ah->opmode == NL80211_IFTYPE_STATION) ||
-	     (ah->opmode == NL80211_IFTYPE_ADHOC))) {
-		ATH_RSSI_LPF(sc->last_rssi, rx_stats->rs_rssi);
-		last_rssi = sc->last_rssi;
-
-		if (likely(last_rssi != ATH_RSSI_DUMMY_MARKER))
-			rssi = ATH_EP_RND(last_rssi, ATH_RSSI_EP_MULTIPLIER);
-		if (rssi < 0)
-			rssi = 0;
-
-		ah->stats.avgbrssi = rssi;
-	}
-
-	rxs->signal = ah->noise + rx_stats->rs_rssi;
-}
-
 static void ath9k_process_tsf(struct ath_rx_status *rs,
 			      struct ieee80211_rx_status *rxs,
 			      u64 tsf)
@@ -1074,7 +1012,7 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
 		goto exit;
 	}
 
-	ath9k_process_rssi(common, hw, rx_stats, rx_status);
+	ath9k_cmn_process_rssi(common, hw, rx_stats, rx_status);
 
 	rx_status->band = ah->curchan->chan->band;
 	rx_status->freq = ah->curchan->chan->center_freq;
-- 
cgit v1.2.2


From 1274603646a82c62776680db85446f767beb9694 Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@rempel-privat.de>
Date: Tue, 4 Feb 2014 10:27:40 +0100
Subject: ath9k: move ath9k_process_rate to common.c

we can reuse this function in ath9k_htc

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/common.c | 42 +++++++++++++++++++++++
 drivers/net/wireless/ath/ath9k/common.h |  4 +++
 drivers/net/wireless/ath/ath9k/recv.c   | 59 +++++----------------------------
 3 files changed, 54 insertions(+), 51 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/common.c b/drivers/net/wireless/ath/ath9k/common.c
index 7028c52fe32e..120fd46edf0f 100644
--- a/drivers/net/wireless/ath/ath9k/common.c
+++ b/drivers/net/wireless/ath/ath9k/common.c
@@ -27,6 +27,48 @@ MODULE_AUTHOR("Atheros Communications");
 MODULE_DESCRIPTION("Shared library for Atheros wireless 802.11n LAN cards.");
 MODULE_LICENSE("Dual BSD/GPL");
 
+int ath9k_cmn_process_rate(struct ath_common *common,
+			   struct ieee80211_hw *hw,
+			   struct ath_rx_status *rx_stats,
+			   struct ieee80211_rx_status *rxs)
+{
+	struct ieee80211_supported_band *sband;
+	enum ieee80211_band band;
+	unsigned int i = 0;
+	struct ath_hw *ah = common->ah;
+
+	band = ah->curchan->chan->band;
+	sband = hw->wiphy->bands[band];
+
+	if (IS_CHAN_QUARTER_RATE(ah->curchan))
+		rxs->flag |= RX_FLAG_5MHZ;
+	else if (IS_CHAN_HALF_RATE(ah->curchan))
+		rxs->flag |= RX_FLAG_10MHZ;
+
+	if (rx_stats->rs_rate & 0x80) {
+		/* HT rate */
+		rxs->flag |= RX_FLAG_HT;
+		rxs->flag |= rx_stats->flag;
+		rxs->rate_idx = rx_stats->rs_rate & 0x7f;
+		return 0;
+	}
+
+	for (i = 0; i < sband->n_bitrates; i++) {
+		if (sband->bitrates[i].hw_value == rx_stats->rs_rate) {
+			rxs->rate_idx = i;
+			return 0;
+		}
+		if (sband->bitrates[i].hw_value_short == rx_stats->rs_rate) {
+			rxs->flag |= RX_FLAG_SHORTPRE;
+			rxs->rate_idx = i;
+			return 0;
+		}
+	}
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL(ath9k_cmn_process_rate);
+
 void ath9k_cmn_process_rssi(struct ath_common *common,
 			    struct ieee80211_hw *hw,
 			    struct ath_rx_status *rx_stats,
diff --git a/drivers/net/wireless/ath/ath9k/common.h b/drivers/net/wireless/ath/ath9k/common.h
index aaf4a9b5ad99..729482f4c35d 100644
--- a/drivers/net/wireless/ath/ath9k/common.h
+++ b/drivers/net/wireless/ath/ath9k/common.h
@@ -42,6 +42,10 @@
 #define ATH_EP_RND(x, mul) 						\
 	(((x) + ((mul)/2)) / (mul))
 
+int ath9k_cmn_process_rate(struct ath_common *common,
+			   struct ieee80211_hw *hw,
+			   struct ath_rx_status *rx_stats,
+			   struct ieee80211_rx_status *rxs);
 void ath9k_cmn_process_rssi(struct ath_common *common,
 			    struct ieee80211_hw *hw,
 			    struct ath_rx_status *rx_stats,
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 5229e63ffbbd..ab6a86c2db43 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -841,56 +841,6 @@ static bool ath9k_rx_accept(struct ath_common *common,
 	return true;
 }
 
-static int ath9k_process_rate(struct ath_common *common,
-			      struct ieee80211_hw *hw,
-			      struct ath_rx_status *rx_stats,
-			      struct ieee80211_rx_status *rxs)
-{
-	struct ieee80211_supported_band *sband;
-	enum ieee80211_band band;
-	unsigned int i = 0;
-	struct ath_softc __maybe_unused *sc = common->priv;
-	struct ath_hw *ah = sc->sc_ah;
-
-	band = ah->curchan->chan->band;
-	sband = hw->wiphy->bands[band];
-
-	if (IS_CHAN_QUARTER_RATE(ah->curchan))
-		rxs->flag |= RX_FLAG_5MHZ;
-	else if (IS_CHAN_HALF_RATE(ah->curchan))
-		rxs->flag |= RX_FLAG_10MHZ;
-
-	if (rx_stats->rs_rate & 0x80) {
-		/* HT rate */
-		rxs->flag |= RX_FLAG_HT;
-		rxs->flag |= rx_stats->flag;
-		rxs->rate_idx = rx_stats->rs_rate & 0x7f;
-		return 0;
-	}
-
-	for (i = 0; i < sband->n_bitrates; i++) {
-		if (sband->bitrates[i].hw_value == rx_stats->rs_rate) {
-			rxs->rate_idx = i;
-			return 0;
-		}
-		if (sband->bitrates[i].hw_value_short == rx_stats->rs_rate) {
-			rxs->flag |= RX_FLAG_SHORTPRE;
-			rxs->rate_idx = i;
-			return 0;
-		}
-	}
-
-	/*
-	 * No valid hardware bitrate found -- we should not get here
-	 * because hardware has already validated this frame as OK.
-	 */
-	ath_dbg(common, ANY,
-		"unsupported hw bitrate detected 0x%02x using 1 Mbit\n",
-		rx_stats->rs_rate);
-	RX_STAT_INC(rx_rate_err);
-	return -EINVAL;
-}
-
 static void ath9k_process_tsf(struct ath_rx_status *rs,
 			      struct ieee80211_rx_status *rxs,
 			      u64 tsf)
@@ -1007,7 +957,14 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
 		goto exit;
 	}
 
-	if (ath9k_process_rate(common, hw, rx_stats, rx_status)) {
+	if (ath9k_cmn_process_rate(common, hw, rx_stats, rx_status)) {
+		/*
+		 * No valid hardware bitrate found -- we should not get here
+		 * because hardware has already validated this frame as OK.
+		 */
+		ath_dbg(common, ANY, "unsupported hw bitrate detected 0x%02x using 1 Mbit\n",
+			rx_stats->rs_rate);
+		RX_STAT_INC(rx_rate_err);
 		ret =-EINVAL;
 		goto exit;
 	}
-- 
cgit v1.2.2


From 6438696efa8163faa74f16005df7e603d6835933 Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@rempel-privat.de>
Date: Tue, 4 Feb 2014 10:27:41 +0100
Subject: ath9k: move ath9k_rx_accept to common.c

we can reuse it on ath9k_htc

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/common.c | 88 +++++++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath9k/common.h |  6 +++
 drivers/net/wireless/ath/ath9k/recv.c   | 88 +--------------------------------
 3 files changed, 95 insertions(+), 87 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/common.c b/drivers/net/wireless/ath/ath9k/common.c
index 120fd46edf0f..5c0d94936a0f 100644
--- a/drivers/net/wireless/ath/ath9k/common.c
+++ b/drivers/net/wireless/ath/ath9k/common.c
@@ -27,6 +27,94 @@ MODULE_AUTHOR("Atheros Communications");
 MODULE_DESCRIPTION("Shared library for Atheros wireless 802.11n LAN cards.");
 MODULE_LICENSE("Dual BSD/GPL");
 
+/* Assumes you've already done the endian to CPU conversion */
+bool ath9k_cmn_rx_accept(struct ath_common *common,
+			 struct ieee80211_hdr *hdr,
+			 struct ieee80211_rx_status *rxs,
+			 struct ath_rx_status *rx_stats,
+			 bool *decrypt_error,
+			 unsigned int rxfilter)
+{
+	struct ath_hw *ah = common->ah;
+	bool is_mc, is_valid_tkip, strip_mic, mic_error;
+	__le16 fc;
+
+	fc = hdr->frame_control;
+
+	is_mc = !!is_multicast_ether_addr(hdr->addr1);
+	is_valid_tkip = rx_stats->rs_keyix != ATH9K_RXKEYIX_INVALID &&
+		test_bit(rx_stats->rs_keyix, common->tkip_keymap);
+	strip_mic = is_valid_tkip && ieee80211_is_data(fc) &&
+		ieee80211_has_protected(fc) &&
+		!(rx_stats->rs_status &
+		(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_CRC | ATH9K_RXERR_MIC |
+		 ATH9K_RXERR_KEYMISS));
+
+	/*
+	 * Key miss events are only relevant for pairwise keys where the
+	 * descriptor does contain a valid key index. This has been observed
+	 * mostly with CCMP encryption.
+	 */
+	if (rx_stats->rs_keyix == ATH9K_RXKEYIX_INVALID ||
+	    !test_bit(rx_stats->rs_keyix, common->ccmp_keymap))
+		rx_stats->rs_status &= ~ATH9K_RXERR_KEYMISS;
+
+	mic_error = is_valid_tkip && !ieee80211_is_ctl(fc) &&
+		!ieee80211_has_morefrags(fc) &&
+		!(le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG) &&
+		(rx_stats->rs_status & ATH9K_RXERR_MIC);
+
+	/*
+	 * The rx_stats->rs_status will not be set until the end of the
+	 * chained descriptors so it can be ignored if rs_more is set. The
+	 * rs_more will be false at the last element of the chained
+	 * descriptors.
+	 */
+	if (rx_stats->rs_status != 0) {
+		u8 status_mask;
+
+		if (rx_stats->rs_status & ATH9K_RXERR_CRC) {
+			rxs->flag |= RX_FLAG_FAILED_FCS_CRC;
+			mic_error = false;
+		}
+
+		if ((rx_stats->rs_status & ATH9K_RXERR_DECRYPT) ||
+		    (!is_mc && (rx_stats->rs_status & ATH9K_RXERR_KEYMISS))) {
+			*decrypt_error = true;
+			mic_error = false;
+		}
+
+
+		/*
+		 * Reject error frames with the exception of
+		 * decryption and MIC failures. For monitor mode,
+		 * we also ignore the CRC error.
+		 */
+		status_mask = ATH9K_RXERR_DECRYPT | ATH9K_RXERR_MIC |
+			      ATH9K_RXERR_KEYMISS;
+
+		if (ah->is_monitoring && (rxfilter & FIF_FCSFAIL))
+			status_mask |= ATH9K_RXERR_CRC;
+
+		if (rx_stats->rs_status & ~status_mask)
+			return false;
+	}
+
+	/*
+	 * For unicast frames the MIC error bit can have false positives,
+	 * so all MIC error reports need to be validated in software.
+	 * False negatives are not common, so skip software verification
+	 * if the hardware considers the MIC valid.
+	 */
+	if (strip_mic)
+		rxs->flag |= RX_FLAG_MMIC_STRIPPED;
+	else if (is_mc && mic_error)
+		rxs->flag |= RX_FLAG_MMIC_ERROR;
+
+	return true;
+}
+EXPORT_SYMBOL(ath9k_cmn_rx_accept);
+
 int ath9k_cmn_process_rate(struct ath_common *common,
 			   struct ieee80211_hw *hw,
 			   struct ath_rx_status *rx_stats,
diff --git a/drivers/net/wireless/ath/ath9k/common.h b/drivers/net/wireless/ath/ath9k/common.h
index 729482f4c35d..c59d3f5db2c3 100644
--- a/drivers/net/wireless/ath/ath9k/common.h
+++ b/drivers/net/wireless/ath/ath9k/common.h
@@ -42,6 +42,12 @@
 #define ATH_EP_RND(x, mul) 						\
 	(((x) + ((mul)/2)) / (mul))
 
+bool ath9k_cmn_rx_accept(struct ath_common *common,
+			 struct ieee80211_hdr *hdr,
+			 struct ieee80211_rx_status *rxs,
+			 struct ath_rx_status *rx_stats,
+			 bool *decrypt_error,
+			 unsigned int rxfilter);
 int ath9k_cmn_process_rate(struct ath_common *common,
 			   struct ieee80211_hw *hw,
 			   struct ath_rx_status *rx_stats,
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index ab6a86c2db43..4dedbc237c9d 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -755,92 +755,6 @@ static struct ath_rxbuf *ath_get_next_rx_buf(struct ath_softc *sc,
 	return bf;
 }
 
-/* Assumes you've already done the endian to CPU conversion */
-static bool ath9k_rx_accept(struct ath_common *common,
-			    struct ieee80211_hdr *hdr,
-			    struct ieee80211_rx_status *rxs,
-			    struct ath_rx_status *rx_stats,
-			    bool *decrypt_error)
-{
-	struct ath_softc *sc = (struct ath_softc *) common->priv;
-	bool is_mc, is_valid_tkip, strip_mic, mic_error;
-	struct ath_hw *ah = common->ah;
-	__le16 fc;
-
-	fc = hdr->frame_control;
-
-	is_mc = !!is_multicast_ether_addr(hdr->addr1);
-	is_valid_tkip = rx_stats->rs_keyix != ATH9K_RXKEYIX_INVALID &&
-		test_bit(rx_stats->rs_keyix, common->tkip_keymap);
-	strip_mic = is_valid_tkip && ieee80211_is_data(fc) &&
-		ieee80211_has_protected(fc) &&
-		!(rx_stats->rs_status &
-		(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_CRC | ATH9K_RXERR_MIC |
-		 ATH9K_RXERR_KEYMISS));
-
-	/*
-	 * Key miss events are only relevant for pairwise keys where the
-	 * descriptor does contain a valid key index. This has been observed
-	 * mostly with CCMP encryption.
-	 */
-	if (rx_stats->rs_keyix == ATH9K_RXKEYIX_INVALID ||
-	    !test_bit(rx_stats->rs_keyix, common->ccmp_keymap))
-		rx_stats->rs_status &= ~ATH9K_RXERR_KEYMISS;
-
-	mic_error = is_valid_tkip && !ieee80211_is_ctl(fc) &&
-		!ieee80211_has_morefrags(fc) &&
-		!(le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG) &&
-		(rx_stats->rs_status & ATH9K_RXERR_MIC);
-
-	/*
-	 * The rx_stats->rs_status will not be set until the end of the
-	 * chained descriptors so it can be ignored if rs_more is set. The
-	 * rs_more will be false at the last element of the chained
-	 * descriptors.
-	 */
-	if (rx_stats->rs_status != 0) {
-		u8 status_mask;
-
-		if (rx_stats->rs_status & ATH9K_RXERR_CRC) {
-			rxs->flag |= RX_FLAG_FAILED_FCS_CRC;
-			mic_error = false;
-		}
-
-		if ((rx_stats->rs_status & ATH9K_RXERR_DECRYPT) ||
-		    (!is_mc && (rx_stats->rs_status & ATH9K_RXERR_KEYMISS))) {
-			*decrypt_error = true;
-			mic_error = false;
-		}
-
-		/*
-		 * Reject error frames with the exception of
-		 * decryption and MIC failures. For monitor mode,
-		 * we also ignore the CRC error.
-		 */
-		status_mask = ATH9K_RXERR_DECRYPT | ATH9K_RXERR_MIC |
-			      ATH9K_RXERR_KEYMISS;
-
-		if (ah->is_monitoring && (sc->rx.rxfilter & FIF_FCSFAIL))
-			status_mask |= ATH9K_RXERR_CRC;
-
-		if (rx_stats->rs_status & ~status_mask)
-			return false;
-	}
-
-	/*
-	 * For unicast frames the MIC error bit can have false positives,
-	 * so all MIC error reports need to be validated in software.
-	 * False negatives are not common, so skip software verification
-	 * if the hardware considers the MIC valid.
-	 */
-	if (strip_mic)
-		rxs->flag |= RX_FLAG_MMIC_STRIPPED;
-	else if (is_mc && mic_error)
-		rxs->flag |= RX_FLAG_MMIC_ERROR;
-
-	return true;
-}
-
 static void ath9k_process_tsf(struct ath_rx_status *rs,
 			      struct ieee80211_rx_status *rxs,
 			      u64 tsf)
@@ -939,7 +853,7 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
 	 * everything but the rate is checked here, the rate check is done
 	 * separately to avoid doing two lookups for a rate for each frame.
 	 */
-	if (!ath9k_rx_accept(common, hdr, rx_status, rx_stats, decrypt_error)) {
+	if (!ath9k_cmn_rx_accept(common, hdr, rx_status, rx_stats, decrypt_error, sc->rx.rxfilter)) {
 		ret = -EINVAL;
 		goto exit;
 	}
-- 
cgit v1.2.2


From 1f83b0492939ec94bcab868f338139a7de521863 Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@rempel-privat.de>
Date: Tue, 4 Feb 2014 10:27:42 +0100
Subject: ath9k_htc: add rx header converter to make it usable by ath9k

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/htc_drv_txrx.c | 37 ++++++++++++++++++++++++++-
 1 file changed, 36 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
index 12e0f32a4905..a3f2201f3e39 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
@@ -966,6 +966,39 @@ static void ath9k_process_rate(struct ieee80211_hw *hw,
 
 }
 
+static inline void convert_htc_flag(struct ath_rx_status *rx_stats,
+				   struct ath_htc_rx_status *rxstatus)
+{
+	rx_stats->flag = 0;
+	if (rxstatus->rs_flags & ATH9K_RX_2040)
+		rx_stats->flag |= RX_FLAG_40MHZ;
+	if (rxstatus->rs_flags & ATH9K_RX_GI)
+		rx_stats->flag |= RX_FLAG_SHORT_GI;
+}
+
+static void rx_status_htc_to_ath(struct ath_rx_status *rx_stats,
+				 struct ath_htc_rx_status *rxstatus)
+{
+	rx_stats->rs_datalen	= rxstatus->rs_datalen;
+	rx_stats->rs_status	= rxstatus->rs_status;
+	rx_stats->rs_phyerr	= rxstatus->rs_phyerr;
+	rx_stats->rs_rssi	= rxstatus->rs_rssi;
+	rx_stats->rs_keyix	= rxstatus->rs_keyix;
+	rx_stats->rs_rate	= rxstatus->rs_rate;
+	rx_stats->rs_antenna	= rxstatus->rs_antenna;
+	rx_stats->rs_more	= rxstatus->rs_more;
+
+	memcpy(rx_stats->rs_rssi_ctl, rxstatus->rs_rssi_ctl,
+		sizeof(rx_stats->rs_rssi_ctl));
+	memcpy(rx_stats->rs_rssi_ext, rxstatus->rs_rssi_ext,
+		sizeof(rx_stats->rs_rssi_ext));
+
+	rx_stats->rs_isaggr	= rxstatus->rs_isaggr;
+	rx_stats->rs_moreaggr	= rxstatus->rs_moreaggr;
+	rx_stats->rs_num_delims	= rxstatus->rs_num_delims;
+	convert_htc_flag(rx_stats, rxstatus);
+}
+
 static bool ath9k_rx_prepare(struct ath9k_htc_priv *priv,
 			     struct ath9k_htc_rxbuf *rxbuf,
 			     struct ieee80211_rx_status *rx_status)
@@ -976,6 +1009,7 @@ static bool ath9k_rx_prepare(struct ath9k_htc_priv *priv,
 	struct sk_buff *skb = rxbuf->skb;
 	struct ath_common *common = ath9k_hw_common(priv->ah);
 	struct ath_htc_rx_status *rxstatus;
+	struct ath_rx_status rx_stats;
 	int hdrlen, padsize;
 	int last_rssi = ATH_RSSI_DUMMY_MARKER;
 	__le16 fc;
@@ -1014,6 +1048,8 @@ static bool ath9k_rx_prepare(struct ath9k_htc_priv *priv,
 
 	memset(rx_status, 0, sizeof(struct ieee80211_rx_status));
 
+	rx_status_htc_to_ath(&rx_stats, &rxbuf->rxstatus);
+
 	if (rxbuf->rxstatus.rs_status != 0) {
 		if (rxbuf->rxstatus.rs_status & ATH9K_RXERR_CRC)
 			rx_status->flag |= RX_FLAG_FAILED_FCS_CRC;
@@ -1095,7 +1131,6 @@ static bool ath9k_rx_prepare(struct ath9k_htc_priv *priv,
 	rx_status->flag |= RX_FLAG_MACTIME_END;
 
 	return true;
-
 rx_next:
 	return false;
 }
-- 
cgit v1.2.2


From e5ba18c6901631237c49ec54ce54397369dea7fa Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@rempel-privat.de>
Date: Tue, 4 Feb 2014 10:27:43 +0100
Subject: ath9k_htc: use ath9k_cmn_process_rssi

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/htc.h          |  1 -
 drivers/net/wireless/ath/ath9k/htc_drv_init.c |  1 +
 drivers/net/wireless/ath/ath9k/htc_drv_main.c |  1 +
 drivers/net/wireless/ath/ath9k/htc_drv_txrx.c | 21 ++-------------------
 drivers/net/wireless/ath/ath9k/mac.h          |  9 +++------
 5 files changed, 7 insertions(+), 26 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/htc.h b/drivers/net/wireless/ath/ath9k/htc.h
index 58da3468d1f0..c75493f4236a 100644
--- a/drivers/net/wireless/ath/ath9k/htc.h
+++ b/drivers/net/wireless/ath/ath9k/htc.h
@@ -275,7 +275,6 @@ struct ath9k_htc_rxbuf {
 };
 
 struct ath9k_htc_rx {
-	int last_rssi; /* FIXME: per-STA */
 	struct list_head rxbuf;
 	spinlock_t rxbuflock;
 };
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
index f4e1de20d99c..9db8aefb8600 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
@@ -607,6 +607,7 @@ static void ath9k_init_misc(struct ath9k_htc_priv *priv)
 
 	memcpy(common->bssidmask, ath_bcast_mac, ETH_ALEN);
 
+	common->last_rssi = ATH_RSSI_DUMMY_MARKER;
 	priv->ah->opmode = NL80211_IFTYPE_STATION;
 }
 
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
index 608d739d1378..228549a65ab9 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
@@ -1457,6 +1457,7 @@ static void ath9k_htc_bss_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
 
 	if ((vif->type == NL80211_IFTYPE_STATION) && bss_conf->assoc) {
 		common->curaid = bss_conf->aid;
+		common->last_rssi = ATH_RSSI_DUMMY_MARKER;
 		memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN);
 	}
 }
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
index a3f2201f3e39..fcf7f5aeb682 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
@@ -927,7 +927,6 @@ void ath9k_host_rx_init(struct ath9k_htc_priv *priv)
 	ath9k_hw_rxena(priv->ah);
 	ath9k_htc_opmode_init(priv);
 	ath9k_hw_startpcureceive(priv->ah, test_bit(OP_SCANNING, &priv->op_flags));
-	priv->rx.last_rssi = ATH_RSSI_DUMMY_MARKER;
 }
 
 static void ath9k_process_rate(struct ieee80211_hw *hw,
@@ -1011,7 +1010,6 @@ static bool ath9k_rx_prepare(struct ath9k_htc_priv *priv,
 	struct ath_htc_rx_status *rxstatus;
 	struct ath_rx_status rx_stats;
 	int hdrlen, padsize;
-	int last_rssi = ATH_RSSI_DUMMY_MARKER;
 	__le16 fc;
 
 	if (skb->len < HTC_RX_FRAME_HEADER_SIZE) {
@@ -1104,24 +1102,9 @@ static bool ath9k_rx_prepare(struct ath9k_htc_priv *priv,
 	ath9k_process_rate(hw, rx_status, rxbuf->rxstatus.rs_rate,
 			   rxbuf->rxstatus.rs_flags);
 
-	if (rxbuf->rxstatus.rs_rssi != ATH9K_RSSI_BAD &&
-	    !rxbuf->rxstatus.rs_moreaggr)
-		ATH_RSSI_LPF(priv->rx.last_rssi,
-			     rxbuf->rxstatus.rs_rssi);
 
-	last_rssi = priv->rx.last_rssi;
-
-	if (ath_is_mybeacon(common, hdr)) {
-		s8 rssi = rxbuf->rxstatus.rs_rssi;
-
-		if (likely(last_rssi != ATH_RSSI_DUMMY_MARKER))
-			rssi = ATH_EP_RND(last_rssi, ATH_RSSI_EP_MULTIPLIER);
-
-		if (rssi < 0)
-			rssi = 0;
-
-		priv->ah->stats.avgbrssi = rssi;
-	}
+	rx_stats.is_mybeacon = ath_is_mybeacon(common, hdr);
+	ath9k_cmn_process_rssi(common, hw, &rx_stats, rx_status);
 
 	rx_status->mactime = be64_to_cpu(rxbuf->rxstatus.rs_tstamp);
 	rx_status->band = hw->conf.chandef.chan->band;
diff --git a/drivers/net/wireless/ath/ath9k/mac.h b/drivers/net/wireless/ath/ath9k/mac.h
index 10271373a0cd..89df634e81f9 100644
--- a/drivers/net/wireless/ath/ath9k/mac.h
+++ b/drivers/net/wireless/ath/ath9k/mac.h
@@ -155,12 +155,8 @@ struct ath_htc_rx_status {
 	u8 rs_status;
 	u8 rs_phyerr;
 	int8_t rs_rssi;
-	int8_t rs_rssi_ctl0;
-	int8_t rs_rssi_ctl1;
-	int8_t rs_rssi_ctl2;
-	int8_t rs_rssi_ext0;
-	int8_t rs_rssi_ext1;
-	int8_t rs_rssi_ext2;
+	int8_t rs_rssi_ctl[3];
+	int8_t rs_rssi_ext[3];
 	u8 rs_keyix;
 	u8 rs_rate;
 	u8 rs_antenna;
@@ -170,6 +166,7 @@ struct ath_htc_rx_status {
 	u8 rs_num_delims;
 	u8 rs_flags;
 	u8 rs_dummy;
+	/* FIXME: evm* never used? */
 	__be32 evm0;
 	__be32 evm1;
 	__be32 evm2;
-- 
cgit v1.2.2


From 1db54ff1832b58b1b65d4d0a2842ee544a6112bd Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@rempel-privat.de>
Date: Tue, 4 Feb 2014 10:27:44 +0100
Subject: ath9k_htc: use ath9k_cmn_process_rate

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/htc_drv_txrx.c | 40 ++-------------------------
 1 file changed, 2 insertions(+), 38 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
index fcf7f5aeb682..6bd7ef8818af 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
@@ -929,42 +929,6 @@ void ath9k_host_rx_init(struct ath9k_htc_priv *priv)
 	ath9k_hw_startpcureceive(priv->ah, test_bit(OP_SCANNING, &priv->op_flags));
 }
 
-static void ath9k_process_rate(struct ieee80211_hw *hw,
-			       struct ieee80211_rx_status *rxs,
-			       u8 rx_rate, u8 rs_flags)
-{
-	struct ieee80211_supported_band *sband;
-	enum ieee80211_band band;
-	unsigned int i = 0;
-
-	if (rx_rate & 0x80) {
-		/* HT rate */
-		rxs->flag |= RX_FLAG_HT;
-		if (rs_flags & ATH9K_RX_2040)
-			rxs->flag |= RX_FLAG_40MHZ;
-		if (rs_flags & ATH9K_RX_GI)
-			rxs->flag |= RX_FLAG_SHORT_GI;
-		rxs->rate_idx = rx_rate & 0x7f;
-		return;
-	}
-
-	band = hw->conf.chandef.chan->band;
-	sband = hw->wiphy->bands[band];
-
-	for (i = 0; i < sband->n_bitrates; i++) {
-		if (sband->bitrates[i].hw_value == rx_rate) {
-			rxs->rate_idx = i;
-			return;
-		}
-		if (sband->bitrates[i].hw_value_short == rx_rate) {
-			rxs->rate_idx = i;
-			rxs->flag |= RX_FLAG_SHORTPRE;
-			return;
-		}
-	}
-
-}
-
 static inline void convert_htc_flag(struct ath_rx_status *rx_stats,
 				   struct ath_htc_rx_status *rxstatus)
 {
@@ -1099,9 +1063,9 @@ static bool ath9k_rx_prepare(struct ath9k_htc_priv *priv,
 		}
 	}
 
-	ath9k_process_rate(hw, rx_status, rxbuf->rxstatus.rs_rate,
-			   rxbuf->rxstatus.rs_flags);
 
+	if (ath9k_cmn_process_rate(common, hw, &rx_stats, rx_status))
+		goto rx_next;
 
 	rx_stats.is_mybeacon = ath_is_mybeacon(common, hdr);
 	ath9k_cmn_process_rssi(common, hw, &rx_stats, rx_status);
-- 
cgit v1.2.2


From 4ed1a8d4a25711f780b96920fff2bb531229e322 Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@rempel-privat.de>
Date: Tue, 4 Feb 2014 10:27:45 +0100
Subject: ath9k_htc: use ath9k_cmn_rx_accept

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/htc_drv_txrx.c | 45 +++++----------------------
 1 file changed, 8 insertions(+), 37 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
index 6bd7ef8818af..8aba265b4802 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
@@ -974,6 +974,7 @@ static bool ath9k_rx_prepare(struct ath9k_htc_priv *priv,
 	struct ath_htc_rx_status *rxstatus;
 	struct ath_rx_status rx_stats;
 	int hdrlen, padsize;
+	bool decrypt_error;
 	__le16 fc;
 
 	if (skb->len < HTC_RX_FRAME_HEADER_SIZE) {
@@ -1012,43 +1013,13 @@ static bool ath9k_rx_prepare(struct ath9k_htc_priv *priv,
 
 	rx_status_htc_to_ath(&rx_stats, &rxbuf->rxstatus);
 
-	if (rxbuf->rxstatus.rs_status != 0) {
-		if (rxbuf->rxstatus.rs_status & ATH9K_RXERR_CRC)
-			rx_status->flag |= RX_FLAG_FAILED_FCS_CRC;
-		if (rxbuf->rxstatus.rs_status & ATH9K_RXERR_PHY)
-			goto rx_next;
-
-		if (rxbuf->rxstatus.rs_status & ATH9K_RXERR_DECRYPT) {
-			/* FIXME */
-		} else if (rxbuf->rxstatus.rs_status & ATH9K_RXERR_MIC) {
-			if (ieee80211_is_ctl(fc))
-				/*
-				 * Sometimes, we get invalid
-				 * MIC failures on valid control frames.
-				 * Remove these mic errors.
-				 */
-				rxbuf->rxstatus.rs_status &= ~ATH9K_RXERR_MIC;
-			else
-				rx_status->flag |= RX_FLAG_MMIC_ERROR;
-		}
-
-		/*
-		 * Reject error frames with the exception of
-		 * decryption and MIC failures. For monitor mode,
-		 * we also ignore the CRC error.
-		 */
-		if (priv->ah->opmode == NL80211_IFTYPE_MONITOR) {
-			if (rxbuf->rxstatus.rs_status &
-			    ~(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_MIC |
-			      ATH9K_RXERR_CRC))
-				goto rx_next;
-		} else {
-			if (rxbuf->rxstatus.rs_status &
-			    ~(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_MIC)) {
-				goto rx_next;
-			}
-		}
-	}
+	/*
+	 * everything but the rate is checked here, the rate check is done
+	 * separately to avoid doing two lookups for a rate for each frame.
+	 */
+	if (!ath9k_cmn_rx_accept(common, hdr, rx_status, &rx_stats,
+			&decrypt_error, priv->rxfilter))
+		goto rx_next;
 
 	if (!(rxbuf->rxstatus.rs_status & ATH9K_RXERR_DECRYPT)) {
 		u8 keyix;
-- 
cgit v1.2.2


From 64d9f1f52807dfb562eb510af2fa0f833a6b3a79 Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@rempel-privat.de>
Date: Tue, 4 Feb 2014 10:27:46 +0100
Subject: ath9k_htc: sync rx_status-> related code with ath9k

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/htc_drv_txrx.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
index 8aba265b4802..e36bf61c4af3 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
@@ -971,6 +971,7 @@ static bool ath9k_rx_prepare(struct ath9k_htc_priv *priv,
 	struct ieee80211_hw *hw = priv->hw;
 	struct sk_buff *skb = rxbuf->skb;
 	struct ath_common *common = ath9k_hw_common(priv->ah);
+	struct ath_hw *ah = common->ah;
 	struct ath_htc_rx_status *rxstatus;
 	struct ath_rx_status rx_stats;
 	int hdrlen, padsize;
@@ -1042,10 +1043,10 @@ static bool ath9k_rx_prepare(struct ath9k_htc_priv *priv,
 	ath9k_cmn_process_rssi(common, hw, &rx_stats, rx_status);
 
 	rx_status->mactime = be64_to_cpu(rxbuf->rxstatus.rs_tstamp);
-	rx_status->band = hw->conf.chandef.chan->band;
-	rx_status->freq = hw->conf.chandef.chan->center_freq;
-	rx_status->signal =  rxbuf->rxstatus.rs_rssi + ATH_DEFAULT_NOISE_FLOOR;
-	rx_status->antenna = rxbuf->rxstatus.rs_antenna;
+
+	rx_status->band = ah->curchan->chan->band;
+	rx_status->freq = ah->curchan->chan->center_freq;
+	rx_status->antenna = rx_stats.rs_antenna;
 	rx_status->flag |= RX_FLAG_MACTIME_END;
 
 	return true;
-- 
cgit v1.2.2


From 5a078fcbdedf88cc3a76ed1b3b4a55a5c61a2e7f Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@rempel-privat.de>
Date: Tue, 4 Feb 2014 10:27:47 +0100
Subject: ath9k: move ath9k_rx_skb_postprocess to common.c

and rename it to ath9k_cmn_rx_skb_postprocess. We will use it
on ath9k_htc.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/common.c | 52 +++++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath9k/common.h |  5 +++
 drivers/net/wireless/ath/ath9k/recv.c   | 55 ++-------------------------------
 3 files changed, 59 insertions(+), 53 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/common.c b/drivers/net/wireless/ath/ath9k/common.c
index 5c0d94936a0f..c6dd7f1fed65 100644
--- a/drivers/net/wireless/ath/ath9k/common.c
+++ b/drivers/net/wireless/ath/ath9k/common.c
@@ -115,6 +115,58 @@ bool ath9k_cmn_rx_accept(struct ath_common *common,
 }
 EXPORT_SYMBOL(ath9k_cmn_rx_accept);
 
+void ath9k_cmn_rx_skb_postprocess(struct ath_common *common,
+				  struct sk_buff *skb,
+				  struct ath_rx_status *rx_stats,
+				  struct ieee80211_rx_status *rxs,
+				  bool decrypt_error)
+{
+	struct ath_hw *ah = common->ah;
+	struct ieee80211_hdr *hdr;
+	int hdrlen, padpos, padsize;
+	u8 keyix;
+	__le16 fc;
+
+	/* see if any padding is done by the hw and remove it */
+	hdr = (struct ieee80211_hdr *) skb->data;
+	hdrlen = ieee80211_get_hdrlen_from_skb(skb);
+	fc = hdr->frame_control;
+	padpos = ieee80211_hdrlen(fc);
+
+	/* The MAC header is padded to have 32-bit boundary if the
+	 * packet payload is non-zero. The general calculation for
+	 * padsize would take into account odd header lengths:
+	 * padsize = (4 - padpos % 4) % 4; However, since only
+	 * even-length headers are used, padding can only be 0 or 2
+	 * bytes and we can optimize this a bit. In addition, we must
+	 * not try to remove padding from short control frames that do
+	 * not have payload. */
+	padsize = padpos & 3;
+	if (padsize && skb->len>=padpos+padsize+FCS_LEN) {
+		memmove(skb->data + padsize, skb->data, padpos);
+		skb_pull(skb, padsize);
+	}
+
+	keyix = rx_stats->rs_keyix;
+
+	if (!(keyix == ATH9K_RXKEYIX_INVALID) && !decrypt_error &&
+	    ieee80211_has_protected(fc)) {
+		rxs->flag |= RX_FLAG_DECRYPTED;
+	} else if (ieee80211_has_protected(fc)
+		   && !decrypt_error && skb->len >= hdrlen + 4) {
+		keyix = skb->data[hdrlen + 3] >> 6;
+
+		if (test_bit(keyix, common->keymap))
+			rxs->flag |= RX_FLAG_DECRYPTED;
+	}
+	if (ah->sw_mgmt_crypto &&
+	    (rxs->flag & RX_FLAG_DECRYPTED) &&
+	    ieee80211_is_mgmt(fc))
+		/* Use software decrypt for management frames. */
+		rxs->flag &= ~RX_FLAG_DECRYPTED;
+}
+EXPORT_SYMBOL(ath9k_cmn_rx_skb_postprocess);
+
 int ath9k_cmn_process_rate(struct ath_common *common,
 			   struct ieee80211_hw *hw,
 			   struct ath_rx_status *rx_stats,
diff --git a/drivers/net/wireless/ath/ath9k/common.h b/drivers/net/wireless/ath/ath9k/common.h
index c59d3f5db2c3..38b5609a4018 100644
--- a/drivers/net/wireless/ath/ath9k/common.h
+++ b/drivers/net/wireless/ath/ath9k/common.h
@@ -48,6 +48,11 @@ bool ath9k_cmn_rx_accept(struct ath_common *common,
 			 struct ath_rx_status *rx_stats,
 			 bool *decrypt_error,
 			 unsigned int rxfilter);
+void ath9k_cmn_rx_skb_postprocess(struct ath_common *common,
+				  struct sk_buff *skb,
+				  struct ath_rx_status *rx_stats,
+				  struct ieee80211_rx_status *rxs,
+				  bool decrypt_error);
 int ath9k_cmn_process_rate(struct ath_common *common,
 			   struct ieee80211_hw *hw,
 			   struct ath_rx_status *rx_stats,
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 4dedbc237c9d..076dae1e5ab7 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -901,57 +901,6 @@ exit:
 	return ret;
 }
 
-static void ath9k_rx_skb_postprocess(struct ath_common *common,
-				     struct sk_buff *skb,
-				     struct ath_rx_status *rx_stats,
-				     struct ieee80211_rx_status *rxs,
-				     bool decrypt_error)
-{
-	struct ath_hw *ah = common->ah;
-	struct ieee80211_hdr *hdr;
-	int hdrlen, padpos, padsize;
-	u8 keyix;
-	__le16 fc;
-
-	/* see if any padding is done by the hw and remove it */
-	hdr = (struct ieee80211_hdr *) skb->data;
-	hdrlen = ieee80211_get_hdrlen_from_skb(skb);
-	fc = hdr->frame_control;
-	padpos = ieee80211_hdrlen(fc);
-
-	/* The MAC header is padded to have 32-bit boundary if the
-	 * packet payload is non-zero. The general calculation for
-	 * padsize would take into account odd header lengths:
-	 * padsize = (4 - padpos % 4) % 4; However, since only
-	 * even-length headers are used, padding can only be 0 or 2
-	 * bytes and we can optimize this a bit. In addition, we must
-	 * not try to remove padding from short control frames that do
-	 * not have payload. */
-	padsize = padpos & 3;
-	if (padsize && skb->len>=padpos+padsize+FCS_LEN) {
-		memmove(skb->data + padsize, skb->data, padpos);
-		skb_pull(skb, padsize);
-	}
-
-	keyix = rx_stats->rs_keyix;
-
-	if (!(keyix == ATH9K_RXKEYIX_INVALID) && !decrypt_error &&
-	    ieee80211_has_protected(fc)) {
-		rxs->flag |= RX_FLAG_DECRYPTED;
-	} else if (ieee80211_has_protected(fc)
-		   && !decrypt_error && skb->len >= hdrlen + 4) {
-		keyix = skb->data[hdrlen + 3] >> 6;
-
-		if (test_bit(keyix, common->keymap))
-			rxs->flag |= RX_FLAG_DECRYPTED;
-	}
-	if (ah->sw_mgmt_crypto &&
-	    (rxs->flag & RX_FLAG_DECRYPTED) &&
-	    ieee80211_is_mgmt(fc))
-		/* Use software decrypt for management frames. */
-		rxs->flag &= ~RX_FLAG_DECRYPTED;
-}
-
 /*
  * Run the LNA combining algorithm only in these cases:
  *
@@ -1101,8 +1050,8 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp)
 			skb_pull(skb, ah->caps.rx_status_len);
 
 		if (!rs.rs_more)
-			ath9k_rx_skb_postprocess(common, hdr_skb, &rs,
-						 rxs, decrypt_error);
+			ath9k_cmn_rx_skb_postprocess(common, hdr_skb, &rs,
+						     rxs, decrypt_error);
 
 		if (rs.rs_more) {
 			RX_STAT_INC(rx_frags);
-- 
cgit v1.2.2


From 341b29b9cd2fa470f2a2a55d7ef07cc167be93da Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@rempel-privat.de>
Date: Tue, 4 Feb 2014 10:27:48 +0100
Subject: ath9k_htc: use ath9k_cmn_rx_skb_postprocess

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/htc_drv_txrx.c | 28 +++------------------------
 1 file changed, 3 insertions(+), 25 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
index e36bf61c4af3..c30af6d83141 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
@@ -974,9 +974,7 @@ static bool ath9k_rx_prepare(struct ath9k_htc_priv *priv,
 	struct ath_hw *ah = common->ah;
 	struct ath_htc_rx_status *rxstatus;
 	struct ath_rx_status rx_stats;
-	int hdrlen, padsize;
 	bool decrypt_error;
-	__le16 fc;
 
 	if (skb->len < HTC_RX_FRAME_HEADER_SIZE) {
 		ath_err(common, "Corrupted RX frame, dropping (len: %d)\n",
@@ -1000,16 +998,6 @@ static bool ath9k_rx_prepare(struct ath9k_htc_priv *priv,
 	memcpy(&rxbuf->rxstatus, rxstatus, HTC_RX_FRAME_HEADER_SIZE);
 	skb_pull(skb, HTC_RX_FRAME_HEADER_SIZE);
 
-	hdr = (struct ieee80211_hdr *)skb->data;
-	fc = hdr->frame_control;
-	hdrlen = ieee80211_get_hdrlen_from_skb(skb);
-
-	padsize = hdrlen & 3;
-	if (padsize && skb->len >= hdrlen+padsize+FCS_LEN) {
-		memmove(skb->data + padsize, skb->data, hdrlen);
-		skb_pull(skb, padsize);
-	}
-
 	memset(rx_status, 0, sizeof(struct ieee80211_rx_status));
 
 	rx_status_htc_to_ath(&rx_stats, &rxbuf->rxstatus);
@@ -1018,23 +1006,13 @@ static bool ath9k_rx_prepare(struct ath9k_htc_priv *priv,
 	 * everything but the rate is checked here, the rate check is done
 	 * separately to avoid doing two lookups for a rate for each frame.
 	 */
+	hdr = (struct ieee80211_hdr *)skb->data;
 	if (!ath9k_cmn_rx_accept(common, hdr, rx_status, &rx_stats,
 			&decrypt_error, priv->rxfilter))
 		goto rx_next;
 
-	if (!(rxbuf->rxstatus.rs_status & ATH9K_RXERR_DECRYPT)) {
-		u8 keyix;
-		keyix = rxbuf->rxstatus.rs_keyix;
-		if (keyix != ATH9K_RXKEYIX_INVALID) {
-			rx_status->flag |= RX_FLAG_DECRYPTED;
-		} else if (ieee80211_has_protected(fc) &&
-			   skb->len >= hdrlen + 4) {
-			keyix = skb->data[hdrlen + 3] >> 6;
-			if (test_bit(keyix, common->keymap))
-				rx_status->flag |= RX_FLAG_DECRYPTED;
-		}
-	}
-
+	ath9k_cmn_rx_skb_postprocess(common, skb, &rx_stats,
+				     rx_status, decrypt_error);
 
 	if (ath9k_cmn_process_rate(common, hw, &rx_stats, rx_status))
 		goto rx_next;
-- 
cgit v1.2.2


From c8ec0f5c9bc4ef3263d5c77e6fd0489a89ed9941 Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@rempel-privat.de>
Date: Tue, 4 Feb 2014 10:27:49 +0100
Subject: ath9k_htc: remove useless memcpy

after switch to common fucntions we do not need this memcpy any more.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/htc_drv_txrx.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
index c30af6d83141..47b2bfcd8223 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
@@ -995,12 +995,14 @@ static bool ath9k_rx_prepare(struct ath9k_htc_priv *priv,
 	ath9k_htc_err_stat_rx(priv, rxstatus);
 
 	/* Get the RX status information */
-	memcpy(&rxbuf->rxstatus, rxstatus, HTC_RX_FRAME_HEADER_SIZE);
-	skb_pull(skb, HTC_RX_FRAME_HEADER_SIZE);
 
 	memset(rx_status, 0, sizeof(struct ieee80211_rx_status));
 
-	rx_status_htc_to_ath(&rx_stats, &rxbuf->rxstatus);
+	/* Copy everything from ath_htc_rx_status (HTC_RX_FRAME_HEADER).
+	 * After this, we can drop this part of skb. */
+	rx_status_htc_to_ath(&rx_stats, rxstatus);
+	rx_status->mactime = be64_to_cpu(rxstatus->rs_tstamp);
+	skb_pull(skb, HTC_RX_FRAME_HEADER_SIZE);
 
 	/*
 	 * everything but the rate is checked here, the rate check is done
@@ -1020,8 +1022,6 @@ static bool ath9k_rx_prepare(struct ath9k_htc_priv *priv,
 	rx_stats.is_mybeacon = ath_is_mybeacon(common, hdr);
 	ath9k_cmn_process_rssi(common, hw, &rx_stats, rx_status);
 
-	rx_status->mactime = be64_to_cpu(rxbuf->rxstatus.rs_tstamp);
-
 	rx_status->band = ah->curchan->chan->band;
 	rx_status->freq = ah->curchan->chan->center_freq;
 	rx_status->antenna = rx_stats.rs_antenna;
-- 
cgit v1.2.2


From 482b30b653e2be8aa1bf70b7aaac56ff0aeb070c Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@rempel-privat.de>
Date: Tue, 4 Feb 2014 10:27:50 +0100
Subject: ath9k_htc: catch fw panic pattern

... and print what we get.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/htc_hst.c | 36 ++++++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath9k/htc_hst.h | 12 +++++++++++
 2 files changed, 48 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/htc_hst.c b/drivers/net/wireless/ath/ath9k/htc_hst.c
index aac4a406a513..a0ff5b637054 100644
--- a/drivers/net/wireless/ath/ath9k/htc_hst.c
+++ b/drivers/net/wireless/ath/ath9k/htc_hst.c
@@ -358,6 +358,36 @@ ret:
 		kfree_skb(skb);
 }
 
+static void ath9k_htc_fw_panic_report(struct htc_target *htc_handle,
+				      struct sk_buff *skb)
+{
+	uint32_t *pattern = (uint32_t *)skb->data;
+
+	switch (*pattern) {
+	case 0x33221199:
+		{
+		struct htc_panic_bad_vaddr *htc_panic;
+		htc_panic = (struct htc_panic_bad_vaddr *) skb->data;
+		dev_err(htc_handle->dev, "ath: firmware panic! "
+			"exccause: 0x%08x; pc: 0x%08x; badvaddr: 0x%08x.\n",
+			htc_panic->exccause, htc_panic->pc,
+			htc_panic->badvaddr);
+		break;
+		}
+	case 0x33221299:
+		{
+		struct htc_panic_bad_epid *htc_panic;
+		htc_panic = (struct htc_panic_bad_epid *) skb->data;
+		dev_err(htc_handle->dev, "ath: firmware panic! "
+			"bad epid: 0x%08x\n", htc_panic->epid);
+		break;
+		}
+	default:
+		dev_err(htc_handle->dev, "ath: uknown panic pattern!\n");
+		break;
+	}
+}
+
 /*
  * HTC Messages are handled directly here and the obtained SKB
  * is freed.
@@ -379,6 +409,12 @@ void ath9k_htc_rx_msg(struct htc_target *htc_handle,
 	htc_hdr = (struct htc_frame_hdr *) skb->data;
 	epid = htc_hdr->endpoint_id;
 
+	if (epid == 0x99) {
+		ath9k_htc_fw_panic_report(htc_handle, skb);
+		kfree_skb(skb);
+		return;
+	}
+
 	if (epid >= ENDPOINT_MAX) {
 		if (pipe_id != USB_REG_IN_PIPE)
 			dev_kfree_skb_any(skb);
diff --git a/drivers/net/wireless/ath/ath9k/htc_hst.h b/drivers/net/wireless/ath/ath9k/htc_hst.h
index e1ffbb6bd636..06474ccc7696 100644
--- a/drivers/net/wireless/ath/ath9k/htc_hst.h
+++ b/drivers/net/wireless/ath/ath9k/htc_hst.h
@@ -77,6 +77,18 @@ struct htc_config_pipe_msg {
 	u8 credits;
 } __packed;
 
+struct htc_panic_bad_vaddr {
+	__be32 pattern;
+	__be32 exccause;
+	__be32 pc;
+	__be32 badvaddr;
+} __packed;
+
+struct htc_panic_bad_epid {
+	__be32 pattern;
+	__be32 epid;
+} __packed;
+
 struct htc_ep_callbacks {
 	void *priv;
 	void (*tx) (void *, struct sk_buff *, enum htc_endpoint_id, bool txok);
-- 
cgit v1.2.2


From 9e495a2603334f9c8fcc6802300c22fc8a0eae02 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Thu, 6 Feb 2014 10:22:55 +0530
Subject: ath9k: Remove ath9k rate control

There is no benefit in retaining the legacy rate control module
in the driver codebase.

It is known to be buggy and has less than optimal performance
in real-world environments compared with minstrel. The only
reason that it was kept when we made the switch to minstrel
as default was that it showed higher throughput numbers in a
clean/ideal environment.

This is no longer the case and minstrel can push ath9k to
the same throughput levels. In TCP, with 3-stream cards, more than
295 Mbps can be obtained in open air, with 2-stream cards,
210 Mbps is easily reached. To test performance issues,
instead of using a broken rate control module, it is better
to use the fixed-rate interface provided by mac80211 anyway.

The ath9k RC has not received any bug fixes in years and is
just bit-rotting away - this patch removes it.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/Kconfig     |   12 -
 drivers/net/wireless/ath/ath9k/Makefile    |    1 -
 drivers/net/wireless/ath/ath9k/ath9k.h     |    6 +-
 drivers/net/wireless/ath/ath9k/debug.h     |    1 -
 drivers/net/wireless/ath/ath9k/dfs_debug.h |    2 +
 drivers/net/wireless/ath/ath9k/hw.c        |    1 -
 drivers/net/wireless/ath/ath9k/init.c      |   14 +-
 drivers/net/wireless/ath/ath9k/rc.c        | 1494 ----------------------------
 drivers/net/wireless/ath/ath9k/rc.h        |  248 -----
 9 files changed, 8 insertions(+), 1771 deletions(-)
 delete mode 100644 drivers/net/wireless/ath/ath9k/rc.c
 delete mode 100644 drivers/net/wireless/ath/ath9k/rc.h

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig
index 7b96b3e5712d..8fcc029a76a6 100644
--- a/drivers/net/wireless/ath/ath9k/Kconfig
+++ b/drivers/net/wireless/ath/ath9k/Kconfig
@@ -120,18 +120,6 @@ config ATH9K_WOW
 	  This option enables Wake on Wireless LAN support for certain cards.
 	  Currently, AR9462 is supported.
 
-config ATH9K_LEGACY_RATE_CONTROL
-	bool "Atheros ath9k rate control"
-	depends on ATH9K
-	default n
-	---help---
-	  Say Y, if you want to use the ath9k specific rate control
-	  module instead of minstrel_ht. Be warned that there are various
-	  issues with the ath9k RC and minstrel is a more robust algorithm.
-	  Note that even if this option is selected, "ath9k_rate_control"
-	  has to be passed to mac80211 using the module parameter,
-	  ieee80211_default_rc_algo.
-
 config ATH9K_RFKILL
 	bool "Atheros ath9k rfkill support" if EXPERT
 	depends on ATH9K
diff --git a/drivers/net/wireless/ath/ath9k/Makefile b/drivers/net/wireless/ath/ath9k/Makefile
index a40e5c5d7418..747975e1860a 100644
--- a/drivers/net/wireless/ath/ath9k/Makefile
+++ b/drivers/net/wireless/ath/ath9k/Makefile
@@ -8,7 +8,6 @@ ath9k-y +=	beacon.o \
 		antenna.o
 
 ath9k-$(CONFIG_ATH9K_BTCOEX_SUPPORT) += mci.o
-ath9k-$(CONFIG_ATH9K_LEGACY_RATE_CONTROL) += rc.o
 ath9k-$(CONFIG_ATH9K_PCI) += pci.o
 ath9k-$(CONFIG_ATH9K_AHB) += ahb.o
 ath9k-$(CONFIG_ATH9K_DFS_DEBUGFS) += dfs_debug.o
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index ff3747c2fc08..21d13bc99c5a 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -30,7 +30,6 @@
 #include "spectral.h"
 
 struct ath_node;
-struct ath_rate_table;
 
 extern struct ieee80211_ops ath9k_ops;
 extern int ath9k_modparam_nohwcrypt;
@@ -150,6 +149,11 @@ int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd,
 #define IS_CCK_RATE(rate)  ((rate >= 0x18) && (rate <= 0x1e))
 #define IS_OFDM_RATE(rate) ((rate >= 0x8) && (rate <= 0xf))
 
+enum {
+       WLAN_RC_PHY_OFDM,
+       WLAN_RC_PHY_CCK,
+};
+
 struct ath_txq {
 	int mac80211_qnum; /* mac80211 queue number, -1 means not mac80211 Q */
 	u32 axq_qnum; /* ath9k hardware queue number */
diff --git a/drivers/net/wireless/ath/ath9k/debug.h b/drivers/net/wireless/ath/ath9k/debug.h
index cc7a025d833e..559a68c2709c 100644
--- a/drivers/net/wireless/ath/ath9k/debug.h
+++ b/drivers/net/wireless/ath/ath9k/debug.h
@@ -18,7 +18,6 @@
 #define DEBUG_H
 
 #include "hw.h"
-#include "rc.h"
 #include "dfs_debug.h"
 
 struct ath_txq;
diff --git a/drivers/net/wireless/ath/ath9k/dfs_debug.h b/drivers/net/wireless/ath/ath9k/dfs_debug.h
index 0a7ddf4c88c9..7936c9126a20 100644
--- a/drivers/net/wireless/ath/ath9k/dfs_debug.h
+++ b/drivers/net/wireless/ath/ath9k/dfs_debug.h
@@ -21,6 +21,8 @@
 
 #include "hw.h"
 
+struct ath_softc;
+
 /**
  * struct ath_dfs_stats - DFS Statistics per wiphy
  * @pulses_total:     pulses reported by HW
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index fbf43c05713f..15b8e783d1a7 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -23,7 +23,6 @@
 
 #include "hw.h"
 #include "hw-ops.h"
-#include "rc.h"
 #include "ar9003_mac.h"
 #include "ar9003_mci.h"
 #include "ar9003_phy.h"
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 00e0f606a0d3..67411d21c9a5 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -1100,19 +1100,11 @@ static int __init ath9k_init(void)
 {
 	int error;
 
-	/* Register rate control algorithm */
-	error = ath_rate_control_register();
-	if (error != 0) {
-		pr_err("Unable to register rate control algorithm: %d\n",
-		       error);
-		goto err_out;
-	}
-
 	error = ath_pci_init();
 	if (error < 0) {
 		pr_err("No PCI devices found, driver not installed\n");
 		error = -ENODEV;
-		goto err_rate_unregister;
+		goto err_out;
 	}
 
 	error = ath_ahb_init();
@@ -1125,9 +1117,6 @@ static int __init ath9k_init(void)
 
  err_pci_exit:
 	ath_pci_exit();
-
- err_rate_unregister:
-	ath_rate_control_unregister();
  err_out:
 	return error;
 }
@@ -1138,7 +1127,6 @@ static void __exit ath9k_exit(void)
 	is_ath9k_unloaded = true;
 	ath_ahb_exit();
 	ath_pci_exit();
-	ath_rate_control_unregister();
 	pr_info("%s: Driver unloaded\n", dev_info);
 }
 module_exit(ath9k_exit);
diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c
deleted file mode 100644
index 7b5afee141da..000000000000
--- a/drivers/net/wireless/ath/ath9k/rc.c
+++ /dev/null
@@ -1,1494 +0,0 @@
-/*
- * Copyright (c) 2004 Video54 Technologies, Inc.
- * Copyright (c) 2004-2011 Atheros Communications, Inc.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include <linux/slab.h>
-#include <linux/export.h>
-
-#include "ath9k.h"
-
-static const struct ath_rate_table ar5416_11na_ratetable = {
-	68,
-	8, /* MCS start */
-	{
-		[0] = { RC_L_SDT, WLAN_RC_PHY_OFDM, 6000,
-			5400, 0, 12 }, /* 6 Mb */
-		[1] = { RC_L_SDT, WLAN_RC_PHY_OFDM, 9000,
-			7800,  1, 18 }, /* 9 Mb */
-		[2] = { RC_L_SDT, WLAN_RC_PHY_OFDM, 12000,
-			10000, 2, 24 }, /* 12 Mb */
-		[3] = { RC_L_SDT, WLAN_RC_PHY_OFDM, 18000,
-			13900, 3, 36 }, /* 18 Mb */
-		[4] = { RC_L_SDT, WLAN_RC_PHY_OFDM, 24000,
-			17300, 4, 48 }, /* 24 Mb */
-		[5] = { RC_L_SDT, WLAN_RC_PHY_OFDM, 36000,
-			23000, 5, 72 }, /* 36 Mb */
-		[6] = { RC_L_SDT, WLAN_RC_PHY_OFDM, 48000,
-			27400, 6, 96 }, /* 48 Mb */
-		[7] = { RC_L_SDT, WLAN_RC_PHY_OFDM, 54000,
-			29300, 7, 108 }, /* 54 Mb */
-		[8] = { RC_HT_SDT_2040, WLAN_RC_PHY_HT_20_SS, 6500,
-			6400, 0, 0 }, /* 6.5 Mb */
-		[9] = { RC_HT_SDT_20, WLAN_RC_PHY_HT_20_SS, 13000,
-			12700, 1, 1 }, /* 13 Mb */
-		[10] = { RC_HT_SDT_20, WLAN_RC_PHY_HT_20_SS, 19500,
-			18800, 2, 2 }, /* 19.5 Mb */
-		[11] = { RC_HT_SD_20, WLAN_RC_PHY_HT_20_SS, 26000,
-			25000, 3, 3 }, /* 26 Mb */
-		[12] = { RC_HT_SD_20, WLAN_RC_PHY_HT_20_SS, 39000,
-			36700, 4, 4 }, /* 39 Mb */
-		[13] = { RC_HT_S_20, WLAN_RC_PHY_HT_20_SS, 52000,
-			48100, 5, 5 }, /* 52 Mb */
-		[14] = { RC_HT_S_20, WLAN_RC_PHY_HT_20_SS, 58500,
-			53500, 6, 6 }, /* 58.5 Mb */
-		[15] = { RC_HT_S_20, WLAN_RC_PHY_HT_20_SS, 65000,
-			59000, 7, 7 }, /* 65 Mb */
-		[16] = { RC_HT_S_20, WLAN_RC_PHY_HT_20_SS_HGI, 72200,
-			65400, 7, 7 }, /* 75 Mb */
-		[17] = { RC_INVALID, WLAN_RC_PHY_HT_20_DS, 13000,
-			12700, 8, 8 }, /* 13 Mb */
-		[18] = { RC_HT_T_20, WLAN_RC_PHY_HT_20_DS, 26000,
-			24800, 9, 9 }, /* 26 Mb */
-		[19] = { RC_HT_T_20, WLAN_RC_PHY_HT_20_DS, 39000,
-			36600, 10, 10 }, /* 39 Mb */
-		[20] = { RC_HT_DT_20, WLAN_RC_PHY_HT_20_DS, 52000,
-			48100, 11, 11 }, /* 52 Mb */
-		[21] = { RC_HT_DT_20, WLAN_RC_PHY_HT_20_DS, 78000,
-			69500, 12, 12 }, /* 78 Mb */
-		[22] = { RC_HT_DT_20, WLAN_RC_PHY_HT_20_DS, 104000,
-			89500, 13, 13 }, /* 104 Mb */
-		[23] = { RC_HT_DT_20, WLAN_RC_PHY_HT_20_DS, 117000,
-			98900, 14, 14 }, /* 117 Mb */
-		[24] = { RC_HT_DT_20, WLAN_RC_PHY_HT_20_DS, 130000,
-			108300, 15, 15 }, /* 130 Mb */
-		[25] = { RC_HT_DT_20, WLAN_RC_PHY_HT_20_DS_HGI, 144400,
-			120000, 15, 15 }, /* 144.4 Mb */
-		[26] = {  RC_INVALID, WLAN_RC_PHY_HT_20_TS, 19500,
-			17400, 16, 16 }, /* 19.5 Mb */
-		[27] = {  RC_INVALID, WLAN_RC_PHY_HT_20_TS, 39000,
-			35100, 17, 17 }, /* 39 Mb */
-		[28] = {  RC_INVALID, WLAN_RC_PHY_HT_20_TS, 58500,
-			52600, 18, 18 }, /* 58.5 Mb */
-		[29] = {  RC_INVALID, WLAN_RC_PHY_HT_20_TS, 78000,
-			70400, 19, 19 }, /* 78 Mb */
-		[30] = {  RC_INVALID, WLAN_RC_PHY_HT_20_TS, 117000,
-			104900, 20, 20 }, /* 117 Mb */
-		[31] = {  RC_INVALID, WLAN_RC_PHY_HT_20_TS_HGI, 130000,
-			115800, 20, 20 }, /* 130 Mb*/
-		[32] = {  RC_HT_T_20, WLAN_RC_PHY_HT_20_TS, 156000,
-			137200, 21, 21 }, /* 156 Mb */
-		[33] = {  RC_HT_T_20, WLAN_RC_PHY_HT_20_TS_HGI, 173300,
-			151100, 21, 21 }, /* 173.3 Mb */
-		[34] = {  RC_HT_T_20, WLAN_RC_PHY_HT_20_TS, 175500,
-			152800, 22, 22 }, /* 175.5 Mb */
-		[35] = {  RC_HT_T_20, WLAN_RC_PHY_HT_20_TS_HGI, 195000,
-			168400, 22, 22 }, /* 195 Mb*/
-		[36] = {  RC_HT_T_20, WLAN_RC_PHY_HT_20_TS, 195000,
-			168400, 23, 23 }, /* 195 Mb */
-		[37] = {  RC_HT_T_20, WLAN_RC_PHY_HT_20_TS_HGI, 216700,
-			185000, 23, 23 }, /* 216.7 Mb */
-		[38] = { RC_HT_SDT_40, WLAN_RC_PHY_HT_40_SS, 13500,
-			13200, 0, 0 }, /* 13.5 Mb*/
-		[39] = { RC_HT_SDT_40, WLAN_RC_PHY_HT_40_SS, 27500,
-			25900, 1, 1 }, /* 27.0 Mb*/
-		[40] = { RC_HT_SDT_40, WLAN_RC_PHY_HT_40_SS, 40500,
-			38600, 2, 2 }, /* 40.5 Mb*/
-		[41] = { RC_HT_SD_40, WLAN_RC_PHY_HT_40_SS, 54000,
-			49800, 3, 3 }, /* 54 Mb */
-		[42] = { RC_HT_SD_40, WLAN_RC_PHY_HT_40_SS, 81500,
-			72200, 4, 4 }, /* 81 Mb */
-		[43] = { RC_HT_S_40, WLAN_RC_PHY_HT_40_SS, 108000,
-			92900, 5, 5 }, /* 108 Mb */
-		[44] = { RC_HT_S_40, WLAN_RC_PHY_HT_40_SS, 121500,
-			102700, 6, 6 }, /* 121.5 Mb*/
-		[45] = { RC_HT_S_40, WLAN_RC_PHY_HT_40_SS, 135000,
-			112000, 7, 7 }, /* 135 Mb */
-		[46] = { RC_HT_S_40, WLAN_RC_PHY_HT_40_SS_HGI, 150000,
-			122000, 7, 7 }, /* 150 Mb */
-		[47] = { RC_INVALID, WLAN_RC_PHY_HT_40_DS, 27000,
-			25800, 8, 8 }, /* 27 Mb */
-		[48] = { RC_HT_T_40, WLAN_RC_PHY_HT_40_DS, 54000,
-			49800, 9, 9 }, /* 54 Mb */
-		[49] = { RC_HT_T_40, WLAN_RC_PHY_HT_40_DS, 81000,
-			71900, 10, 10 }, /* 81 Mb */
-		[50] = { RC_HT_DT_40, WLAN_RC_PHY_HT_40_DS, 108000,
-			92500, 11, 11 }, /* 108 Mb */
-		[51] = { RC_HT_DT_40, WLAN_RC_PHY_HT_40_DS, 162000,
-			130300, 12, 12 }, /* 162 Mb */
-		[52] = { RC_HT_DT_40, WLAN_RC_PHY_HT_40_DS, 216000,
-			162800, 13, 13 }, /* 216 Mb */
-		[53] = { RC_HT_DT_40, WLAN_RC_PHY_HT_40_DS, 243000,
-			178200, 14, 14 }, /* 243 Mb */
-		[54] = { RC_HT_DT_40, WLAN_RC_PHY_HT_40_DS, 270000,
-			192100, 15, 15 }, /* 270 Mb */
-		[55] = { RC_HT_DT_40, WLAN_RC_PHY_HT_40_DS_HGI, 300000,
-			207000, 15, 15 }, /* 300 Mb */
-		[56] = {  RC_INVALID, WLAN_RC_PHY_HT_40_TS, 40500,
-			36100, 16, 16 }, /* 40.5 Mb */
-		[57] = {  RC_INVALID, WLAN_RC_PHY_HT_40_TS, 81000,
-			72900, 17, 17 }, /* 81 Mb */
-		[58] = {  RC_INVALID, WLAN_RC_PHY_HT_40_TS, 121500,
-			108300, 18, 18 }, /* 121.5 Mb */
-		[59] = {  RC_INVALID, WLAN_RC_PHY_HT_40_TS, 162000,
-			142000, 19, 19 }, /*  162 Mb */
-		[60] = {  RC_INVALID, WLAN_RC_PHY_HT_40_TS, 243000,
-			205100, 20, 20 }, /*  243 Mb */
-		[61] = {  RC_INVALID, WLAN_RC_PHY_HT_40_TS_HGI, 270000,
-			224700, 20, 20 }, /*  270 Mb */
-		[62] = {  RC_HT_T_40, WLAN_RC_PHY_HT_40_TS, 324000,
-			263100, 21, 21 }, /*  324 Mb */
-		[63] = {  RC_HT_T_40, WLAN_RC_PHY_HT_40_TS_HGI, 360000,
-			288000, 21, 21 }, /*  360 Mb */
-		[64] = {  RC_HT_T_40, WLAN_RC_PHY_HT_40_TS, 364500,
-			290700, 22, 22 }, /* 364.5 Mb */
-		[65] = {  RC_HT_T_40, WLAN_RC_PHY_HT_40_TS_HGI, 405000,
-			317200, 22, 22 }, /* 405 Mb */
-		[66] = {  RC_HT_T_40, WLAN_RC_PHY_HT_40_TS, 405000,
-			317200, 23, 23 }, /* 405 Mb */
-		[67] = {  RC_HT_T_40, WLAN_RC_PHY_HT_40_TS_HGI, 450000,
-			346400, 23, 23 }, /* 450 Mb */
-	},
-	50,  /* probe interval */
-	WLAN_RC_HT_FLAG,  /* Phy rates allowed initially */
-};
-
-/* 4ms frame limit not used for NG mode.  The values filled
- * for HT are the 64K max aggregate limit */
-
-static const struct ath_rate_table ar5416_11ng_ratetable = {
-	72,
-	12, /* MCS start */
-	{
-		[0] = { RC_ALL, WLAN_RC_PHY_CCK, 1000,
-			900, 0, 2 }, /* 1 Mb */
-		[1] = { RC_ALL, WLAN_RC_PHY_CCK, 2000,
-			1900, 1, 4 }, /* 2 Mb */
-		[2] = { RC_ALL, WLAN_RC_PHY_CCK, 5500,
-			4900, 2, 11 }, /* 5.5 Mb */
-		[3] = { RC_ALL, WLAN_RC_PHY_CCK, 11000,
-			8100, 3, 22 }, /* 11 Mb */
-		[4] = { RC_INVALID, WLAN_RC_PHY_OFDM, 6000,
-			5400, 4, 12 }, /* 6 Mb */
-		[5] = { RC_INVALID, WLAN_RC_PHY_OFDM, 9000,
-			7800, 5, 18 }, /* 9 Mb */
-		[6] = { RC_L_SDT, WLAN_RC_PHY_OFDM, 12000,
-			10100, 6, 24 }, /* 12 Mb */
-		[7] = { RC_L_SDT, WLAN_RC_PHY_OFDM, 18000,
-			14100, 7, 36 }, /* 18 Mb */
-		[8] = { RC_L_SDT, WLAN_RC_PHY_OFDM, 24000,
-			17700, 8, 48 }, /* 24 Mb */
-		[9] = { RC_L_SDT, WLAN_RC_PHY_OFDM, 36000,
-			23700, 9, 72 }, /* 36 Mb */
-		[10] = { RC_L_SDT, WLAN_RC_PHY_OFDM, 48000,
-			27400, 10, 96 }, /* 48 Mb */
-		[11] = { RC_L_SDT, WLAN_RC_PHY_OFDM, 54000,
-			30900, 11, 108 }, /* 54 Mb */
-		[12] = { RC_INVALID, WLAN_RC_PHY_HT_20_SS, 6500,
-			6400, 0, 0 }, /* 6.5 Mb */
-		[13] = { RC_HT_SDT_20, WLAN_RC_PHY_HT_20_SS, 13000,
-			12700, 1, 1 }, /* 13 Mb */
-		[14] = { RC_HT_SDT_20, WLAN_RC_PHY_HT_20_SS, 19500,
-			18800, 2, 2 }, /* 19.5 Mb*/
-		[15] = { RC_HT_SD_20, WLAN_RC_PHY_HT_20_SS, 26000,
-			25000, 3, 3 }, /* 26 Mb */
-		[16] = { RC_HT_SD_20, WLAN_RC_PHY_HT_20_SS, 39000,
-			36700, 4, 4 }, /* 39 Mb */
-		[17] = { RC_HT_S_20, WLAN_RC_PHY_HT_20_SS, 52000,
-			48100, 5, 5 }, /* 52 Mb */
-		[18] = { RC_HT_S_20, WLAN_RC_PHY_HT_20_SS, 58500,
-			53500, 6, 6 }, /* 58.5 Mb */
-		[19] = { RC_HT_S_20, WLAN_RC_PHY_HT_20_SS, 65000,
-			59000, 7, 7 }, /* 65 Mb */
-		[20] = { RC_HT_S_20, WLAN_RC_PHY_HT_20_SS_HGI, 72200,
-			65400, 7, 7 }, /* 65 Mb*/
-		[21] = { RC_INVALID, WLAN_RC_PHY_HT_20_DS, 13000,
-			12700, 8, 8 }, /* 13 Mb */
-		[22] = { RC_HT_T_20, WLAN_RC_PHY_HT_20_DS, 26000,
-			24800, 9, 9 }, /* 26 Mb */
-		[23] = { RC_HT_T_20, WLAN_RC_PHY_HT_20_DS, 39000,
-			36600, 10, 10 }, /* 39 Mb */
-		[24] = { RC_HT_DT_20, WLAN_RC_PHY_HT_20_DS, 52000,
-			48100, 11, 11 }, /* 52 Mb */
-		[25] = { RC_HT_DT_20, WLAN_RC_PHY_HT_20_DS, 78000,
-			69500, 12, 12 }, /* 78 Mb */
-		[26] = { RC_HT_DT_20, WLAN_RC_PHY_HT_20_DS, 104000,
-			89500, 13, 13 }, /* 104 Mb */
-		[27] = { RC_HT_DT_20, WLAN_RC_PHY_HT_20_DS, 117000,
-			98900, 14, 14 }, /* 117 Mb */
-		[28] = { RC_HT_DT_20, WLAN_RC_PHY_HT_20_DS, 130000,
-			108300, 15, 15 }, /* 130 Mb */
-		[29] = { RC_HT_DT_20, WLAN_RC_PHY_HT_20_DS_HGI, 144400,
-			120000, 15, 15 }, /* 144.4 Mb */
-		[30] = {  RC_INVALID, WLAN_RC_PHY_HT_20_TS, 19500,
-			17400, 16, 16 }, /* 19.5 Mb */
-		[31] = {  RC_INVALID, WLAN_RC_PHY_HT_20_TS, 39000,
-			35100, 17, 17 }, /* 39 Mb */
-		[32] = {  RC_INVALID, WLAN_RC_PHY_HT_20_TS, 58500,
-			52600, 18, 18 }, /* 58.5 Mb */
-		[33] = {  RC_INVALID, WLAN_RC_PHY_HT_20_TS, 78000,
-			70400, 19, 19 }, /* 78 Mb */
-		[34] = {  RC_INVALID, WLAN_RC_PHY_HT_20_TS, 117000,
-			104900, 20, 20 }, /* 117 Mb */
-		[35] = {  RC_INVALID, WLAN_RC_PHY_HT_20_TS_HGI, 130000,
-			115800, 20, 20 }, /* 130 Mb */
-		[36] = {  RC_HT_T_20, WLAN_RC_PHY_HT_20_TS, 156000,
-			137200, 21, 21 }, /* 156 Mb */
-		[37] = {  RC_HT_T_20, WLAN_RC_PHY_HT_20_TS_HGI, 173300,
-			151100, 21, 21 }, /* 173.3 Mb */
-		[38] = {  RC_HT_T_20, WLAN_RC_PHY_HT_20_TS, 175500,
-			152800, 22, 22 }, /* 175.5 Mb */
-		[39] = {  RC_HT_T_20, WLAN_RC_PHY_HT_20_TS_HGI, 195000,
-			168400, 22, 22 }, /* 195 Mb */
-		[40] = {  RC_HT_T_20, WLAN_RC_PHY_HT_20_TS, 195000,
-			168400, 23, 23 }, /* 195 Mb */
-		[41] = {  RC_HT_T_20, WLAN_RC_PHY_HT_20_TS_HGI, 216700,
-			185000, 23, 23 }, /* 216.7 Mb */
-		[42] = { RC_HT_SDT_40, WLAN_RC_PHY_HT_40_SS, 13500,
-			13200, 0, 0 }, /* 13.5 Mb */
-		[43] = { RC_HT_SDT_40, WLAN_RC_PHY_HT_40_SS, 27500,
-			25900, 1, 1 }, /* 27.0 Mb */
-		[44] = { RC_HT_SDT_40, WLAN_RC_PHY_HT_40_SS, 40500,
-			38600, 2, 2 }, /* 40.5 Mb */
-		[45] = { RC_HT_SD_40, WLAN_RC_PHY_HT_40_SS, 54000,
-			49800, 3, 3 }, /* 54 Mb */
-		[46] = { RC_HT_SD_40, WLAN_RC_PHY_HT_40_SS, 81500,
-			72200, 4, 4 }, /* 81 Mb */
-		[47] = { RC_HT_S_40 , WLAN_RC_PHY_HT_40_SS, 108000,
-			92900, 5, 5 }, /* 108 Mb */
-		[48] = { RC_HT_S_40, WLAN_RC_PHY_HT_40_SS, 121500,
-			102700, 6, 6 }, /* 121.5 Mb */
-		[49] = { RC_HT_S_40, WLAN_RC_PHY_HT_40_SS, 135000,
-			112000, 7, 7 }, /* 135 Mb */
-		[50] = { RC_HT_S_40, WLAN_RC_PHY_HT_40_SS_HGI, 150000,
-			122000, 7, 7 }, /* 150 Mb */
-		[51] = { RC_INVALID, WLAN_RC_PHY_HT_40_DS, 27000,
-			25800, 8, 8 }, /* 27 Mb */
-		[52] = { RC_HT_T_40, WLAN_RC_PHY_HT_40_DS, 54000,
-			49800, 9, 9 }, /* 54 Mb */
-		[53] = { RC_HT_T_40, WLAN_RC_PHY_HT_40_DS, 81000,
-			71900, 10, 10 }, /* 81 Mb */
-		[54] = { RC_HT_DT_40, WLAN_RC_PHY_HT_40_DS, 108000,
-			92500, 11, 11 }, /* 108 Mb */
-		[55] = { RC_HT_DT_40, WLAN_RC_PHY_HT_40_DS, 162000,
-			130300, 12, 12 }, /* 162 Mb */
-		[56] = { RC_HT_DT_40, WLAN_RC_PHY_HT_40_DS, 216000,
-			162800, 13, 13 }, /* 216 Mb */
-		[57] = { RC_HT_DT_40, WLAN_RC_PHY_HT_40_DS, 243000,
-			178200, 14, 14 }, /* 243 Mb */
-		[58] = { RC_HT_DT_40, WLAN_RC_PHY_HT_40_DS, 270000,
-			192100, 15, 15 }, /* 270 Mb */
-		[59] = { RC_HT_DT_40, WLAN_RC_PHY_HT_40_DS_HGI, 300000,
-			207000, 15, 15 }, /* 300 Mb */
-		[60] = {  RC_INVALID, WLAN_RC_PHY_HT_40_TS, 40500,
-			36100, 16, 16 }, /* 40.5 Mb */
-		[61] = {  RC_INVALID, WLAN_RC_PHY_HT_40_TS, 81000,
-			72900, 17, 17 }, /* 81 Mb */
-		[62] = {  RC_INVALID, WLAN_RC_PHY_HT_40_TS, 121500,
-			108300, 18, 18 }, /* 121.5 Mb */
-		[63] = {  RC_INVALID, WLAN_RC_PHY_HT_40_TS, 162000,
-			142000, 19, 19 }, /* 162 Mb */
-		[64] = {  RC_INVALID, WLAN_RC_PHY_HT_40_TS, 243000,
-			205100, 20, 20 }, /* 243 Mb */
-		[65] = {  RC_INVALID, WLAN_RC_PHY_HT_40_TS_HGI, 270000,
-			224700, 20, 20 }, /* 270 Mb */
-		[66] = {  RC_HT_T_40, WLAN_RC_PHY_HT_40_TS, 324000,
-			263100, 21, 21 }, /* 324 Mb */
-		[67] = {  RC_HT_T_40, WLAN_RC_PHY_HT_40_TS_HGI, 360000,
-			288000, 21, 21 }, /* 360 Mb */
-		[68] = {  RC_HT_T_40, WLAN_RC_PHY_HT_40_TS, 364500,
-			290700, 22, 22 }, /* 364.5 Mb */
-		[69] = {  RC_HT_T_40, WLAN_RC_PHY_HT_40_TS_HGI, 405000,
-			317200, 22, 22 }, /* 405 Mb */
-		[70] = {  RC_HT_T_40, WLAN_RC_PHY_HT_40_TS, 405000,
-			317200, 23, 23 }, /* 405 Mb */
-		[71] = {  RC_HT_T_40, WLAN_RC_PHY_HT_40_TS_HGI, 450000,
-			346400, 23, 23 }, /* 450 Mb */
-	},
-	50,  /* probe interval */
-	WLAN_RC_HT_FLAG,  /* Phy rates allowed initially */
-};
-
-static const struct ath_rate_table ar5416_11a_ratetable = {
-	8,
-	0,
-	{
-		{ RC_L_SDT, WLAN_RC_PHY_OFDM, 6000, /* 6 Mb */
-			5400, 0, 12},
-		{ RC_L_SDT, WLAN_RC_PHY_OFDM, 9000, /* 9 Mb */
-			7800,  1, 18},
-		{ RC_L_SDT, WLAN_RC_PHY_OFDM, 12000, /* 12 Mb */
-			10000, 2, 24},
-		{ RC_L_SDT, WLAN_RC_PHY_OFDM, 18000, /* 18 Mb */
-			13900, 3, 36},
-		{ RC_L_SDT, WLAN_RC_PHY_OFDM, 24000, /* 24 Mb */
-			17300, 4, 48},
-		{ RC_L_SDT, WLAN_RC_PHY_OFDM, 36000, /* 36 Mb */
-			23000, 5, 72},
-		{ RC_L_SDT, WLAN_RC_PHY_OFDM, 48000, /* 48 Mb */
-			27400, 6, 96},
-		{ RC_L_SDT, WLAN_RC_PHY_OFDM, 54000, /* 54 Mb */
-			29300, 7, 108},
-	},
-	50,  /* probe interval */
-	0,   /* Phy rates allowed initially */
-};
-
-static const struct ath_rate_table ar5416_11g_ratetable = {
-	12,
-	0,
-	{
-		{ RC_L_SDT, WLAN_RC_PHY_CCK, 1000, /* 1 Mb */
-			900, 0, 2},
-		{ RC_L_SDT, WLAN_RC_PHY_CCK, 2000, /* 2 Mb */
-			1900, 1, 4},
-		{ RC_L_SDT, WLAN_RC_PHY_CCK, 5500, /* 5.5 Mb */
-			4900, 2, 11},
-		{ RC_L_SDT, WLAN_RC_PHY_CCK, 11000, /* 11 Mb */
-			8100, 3, 22},
-		{ RC_INVALID, WLAN_RC_PHY_OFDM, 6000, /* 6 Mb */
-			5400, 4, 12},
-		{ RC_INVALID, WLAN_RC_PHY_OFDM, 9000, /* 9 Mb */
-			7800, 5, 18},
-		{ RC_L_SDT, WLAN_RC_PHY_OFDM, 12000, /* 12 Mb */
-			10000, 6, 24},
-		{ RC_L_SDT, WLAN_RC_PHY_OFDM, 18000, /* 18 Mb */
-			13900, 7, 36},
-		{ RC_L_SDT, WLAN_RC_PHY_OFDM, 24000, /* 24 Mb */
-			17300, 8, 48},
-		{ RC_L_SDT, WLAN_RC_PHY_OFDM, 36000, /* 36 Mb */
-			23000, 9, 72},
-		{ RC_L_SDT, WLAN_RC_PHY_OFDM, 48000, /* 48 Mb */
-			27400, 10, 96},
-		{ RC_L_SDT, WLAN_RC_PHY_OFDM, 54000, /* 54 Mb */
-			29300, 11, 108},
-	},
-	50,  /* probe interval */
-	0,   /* Phy rates allowed initially */
-};
-
-static int ath_rc_get_rateindex(struct ath_rate_priv *ath_rc_priv,
-				struct ieee80211_tx_rate *rate)
-{
-	const struct ath_rate_table *rate_table = ath_rc_priv->rate_table;
-	int rix, i, idx = 0;
-
-	if (!(rate->flags & IEEE80211_TX_RC_MCS))
-		return rate->idx;
-
-	for (i = 0; i < ath_rc_priv->max_valid_rate; i++) {
-		idx = ath_rc_priv->valid_rate_index[i];
-
-		if (WLAN_RC_PHY_HT(rate_table->info[idx].phy) &&
-		    rate_table->info[idx].ratecode == rate->idx)
-			break;
-	}
-
-	rix = idx;
-
-	if (rate->flags & IEEE80211_TX_RC_SHORT_GI)
-		rix++;
-
-	return rix;
-}
-
-static void ath_rc_sort_validrates(struct ath_rate_priv *ath_rc_priv)
-{
-	const struct ath_rate_table *rate_table = ath_rc_priv->rate_table;
-	u8 i, j, idx, idx_next;
-
-	for (i = ath_rc_priv->max_valid_rate - 1; i > 0; i--) {
-		for (j = 0; j <= i-1; j++) {
-			idx = ath_rc_priv->valid_rate_index[j];
-			idx_next = ath_rc_priv->valid_rate_index[j+1];
-
-			if (rate_table->info[idx].ratekbps >
-				rate_table->info[idx_next].ratekbps) {
-				ath_rc_priv->valid_rate_index[j] = idx_next;
-				ath_rc_priv->valid_rate_index[j+1] = idx;
-			}
-		}
-	}
-}
-
-static inline
-int ath_rc_get_nextvalid_txrate(const struct ath_rate_table *rate_table,
-				struct ath_rate_priv *ath_rc_priv,
-				u8 cur_valid_txrate,
-				u8 *next_idx)
-{
-	u8 i;
-
-	for (i = 0; i < ath_rc_priv->max_valid_rate - 1; i++) {
-		if (ath_rc_priv->valid_rate_index[i] == cur_valid_txrate) {
-			*next_idx = ath_rc_priv->valid_rate_index[i+1];
-			return 1;
-		}
-	}
-
-	/* No more valid rates */
-	*next_idx = 0;
-
-	return 0;
-}
-
-/* Return true only for single stream */
-
-static int ath_rc_valid_phyrate(u32 phy, u32 capflag, int ignore_cw)
-{
-	if (WLAN_RC_PHY_HT(phy) && !(capflag & WLAN_RC_HT_FLAG))
-		return 0;
-	if (WLAN_RC_PHY_DS(phy) && !(capflag & WLAN_RC_DS_FLAG))
-		return 0;
-	if (WLAN_RC_PHY_TS(phy) && !(capflag & WLAN_RC_TS_FLAG))
-		return 0;
-	if (WLAN_RC_PHY_SGI(phy) && !(capflag & WLAN_RC_SGI_FLAG))
-		return 0;
-	if (!ignore_cw && WLAN_RC_PHY_HT(phy))
-		if (WLAN_RC_PHY_40(phy) && !(capflag & WLAN_RC_40_FLAG))
-			return 0;
-	return 1;
-}
-
-static inline int
-ath_rc_get_lower_rix(struct ath_rate_priv *ath_rc_priv,
-		     u8 cur_valid_txrate, u8 *next_idx)
-{
-	int8_t i;
-
-	for (i = 1; i < ath_rc_priv->max_valid_rate ; i++) {
-		if (ath_rc_priv->valid_rate_index[i] == cur_valid_txrate) {
-			*next_idx = ath_rc_priv->valid_rate_index[i-1];
-			return 1;
-		}
-	}
-
-	return 0;
-}
-
-static u8 ath_rc_init_validrates(struct ath_rate_priv *ath_rc_priv)
-{
-	const struct ath_rate_table *rate_table = ath_rc_priv->rate_table;
-	u8 i, hi = 0;
-
-	for (i = 0; i < rate_table->rate_cnt; i++) {
-		if (rate_table->info[i].rate_flags & RC_LEGACY) {
-			u32 phy = rate_table->info[i].phy;
-			u8 valid_rate_count = 0;
-
-			if (!ath_rc_valid_phyrate(phy, ath_rc_priv->ht_cap, 0))
-				continue;
-
-			valid_rate_count = ath_rc_priv->valid_phy_ratecnt[phy];
-
-			ath_rc_priv->valid_phy_rateidx[phy][valid_rate_count] = i;
-			ath_rc_priv->valid_phy_ratecnt[phy] += 1;
-			ath_rc_priv->valid_rate_index[i] = true;
-			hi = i;
-		}
-	}
-
-	return hi;
-}
-
-static inline bool ath_rc_check_legacy(u8 rate, u8 dot11rate, u16 rate_flags,
-				       u32 phy, u32 capflag)
-{
-	if (rate != dot11rate || WLAN_RC_PHY_HT(phy))
-		return false;
-
-	if ((rate_flags & WLAN_RC_CAP_MODE(capflag)) != WLAN_RC_CAP_MODE(capflag))
-		return false;
-
-	if (!(rate_flags & WLAN_RC_CAP_STREAM(capflag)))
-		return false;
-
-	return true;
-}
-
-static inline bool ath_rc_check_ht(u8 rate, u8 dot11rate, u16 rate_flags,
-				   u32 phy, u32 capflag)
-{
-	if (rate != dot11rate || !WLAN_RC_PHY_HT(phy))
-		return false;
-
-	if (!WLAN_RC_PHY_HT_VALID(rate_flags, capflag))
-		return false;
-
-	if (!(rate_flags & WLAN_RC_CAP_STREAM(capflag)))
-		return false;
-
-	return true;
-}
-
-static u8 ath_rc_setvalid_rates(struct ath_rate_priv *ath_rc_priv, bool legacy)
-{
-	const struct ath_rate_table *rate_table = ath_rc_priv->rate_table;
-	struct ath_rateset *rateset;
-	u32 phy, capflag = ath_rc_priv->ht_cap;
-	u16 rate_flags;
-	u8 i, j, hi = 0, rate, dot11rate, valid_rate_count;
-
-	if (legacy)
-		rateset = &ath_rc_priv->neg_rates;
-	else
-		rateset = &ath_rc_priv->neg_ht_rates;
-
-	for (i = 0; i < rateset->rs_nrates; i++) {
-		for (j = 0; j < rate_table->rate_cnt; j++) {
-			phy = rate_table->info[j].phy;
-			rate_flags = rate_table->info[j].rate_flags;
-			rate = rateset->rs_rates[i];
-			dot11rate = rate_table->info[j].dot11rate;
-
-			if (legacy &&
-			    !ath_rc_check_legacy(rate, dot11rate,
-						 rate_flags, phy, capflag))
-				continue;
-
-			if (!legacy &&
-			    !ath_rc_check_ht(rate, dot11rate,
-					     rate_flags, phy, capflag))
-				continue;
-
-			if (!ath_rc_valid_phyrate(phy, capflag, 0))
-				continue;
-
-			valid_rate_count = ath_rc_priv->valid_phy_ratecnt[phy];
-			ath_rc_priv->valid_phy_rateidx[phy][valid_rate_count] = j;
-			ath_rc_priv->valid_phy_ratecnt[phy] += 1;
-			ath_rc_priv->valid_rate_index[j] = true;
-			hi = max(hi, j);
-		}
-	}
-
-	return hi;
-}
-
-static u8 ath_rc_get_highest_rix(struct ath_rate_priv *ath_rc_priv,
-				 int *is_probing)
-{
-	const struct ath_rate_table *rate_table = ath_rc_priv->rate_table;
-	u32 best_thruput, this_thruput, now_msec;
-	u8 rate, next_rate, best_rate, maxindex, minindex;
-	int8_t index = 0;
-
-	now_msec = jiffies_to_msecs(jiffies);
-	*is_probing = 0;
-	best_thruput = 0;
-	maxindex = ath_rc_priv->max_valid_rate-1;
-	minindex = 0;
-	best_rate = minindex;
-
-	/*
-	 * Try the higher rate first. It will reduce memory moving time
-	 * if we have very good channel characteristics.
-	 */
-	for (index = maxindex; index >= minindex ; index--) {
-		u8 per_thres;
-
-		rate = ath_rc_priv->valid_rate_index[index];
-		if (rate > ath_rc_priv->rate_max_phy)
-			continue;
-
-		/*
-		 * For TCP the average collision rate is around 11%,
-		 * so we ignore PERs less than this.  This is to
-		 * prevent the rate we are currently using (whose
-		 * PER might be in the 10-15 range because of TCP
-		 * collisions) looking worse than the next lower
-		 * rate whose PER has decayed close to 0.  If we
-		 * used to next lower rate, its PER would grow to
-		 * 10-15 and we would be worse off then staying
-		 * at the current rate.
-		 */
-		per_thres = ath_rc_priv->per[rate];
-		if (per_thres < 12)
-			per_thres = 12;
-
-		this_thruput = rate_table->info[rate].user_ratekbps *
-			(100 - per_thres);
-
-		if (best_thruput <= this_thruput) {
-			best_thruput = this_thruput;
-			best_rate    = rate;
-		}
-	}
-
-	rate = best_rate;
-
-	/*
-	 * Must check the actual rate (ratekbps) to account for
-	 * non-monoticity of 11g's rate table
-	 */
-
-	if (rate >= ath_rc_priv->rate_max_phy) {
-		rate = ath_rc_priv->rate_max_phy;
-
-		/* Probe the next allowed phy state */
-		if (ath_rc_get_nextvalid_txrate(rate_table,
-					ath_rc_priv, rate, &next_rate) &&
-		    (now_msec - ath_rc_priv->probe_time >
-		     rate_table->probe_interval) &&
-		    (ath_rc_priv->hw_maxretry_pktcnt >= 1)) {
-			rate = next_rate;
-			ath_rc_priv->probe_rate = rate;
-			ath_rc_priv->probe_time = now_msec;
-			ath_rc_priv->hw_maxretry_pktcnt = 0;
-			*is_probing = 1;
-		}
-	}
-
-	if (rate > (ath_rc_priv->rate_table_size - 1))
-		rate = ath_rc_priv->rate_table_size - 1;
-
-	if (RC_TS_ONLY(rate_table->info[rate].rate_flags) &&
-	    (ath_rc_priv->ht_cap & WLAN_RC_TS_FLAG))
-		return rate;
-
-	if (RC_DS_OR_LATER(rate_table->info[rate].rate_flags) &&
-	    (ath_rc_priv->ht_cap & (WLAN_RC_DS_FLAG | WLAN_RC_TS_FLAG)))
-		return rate;
-
-	if (RC_SS_OR_LEGACY(rate_table->info[rate].rate_flags))
-		return rate;
-
-	/* This should not happen */
-	WARN_ON_ONCE(1);
-
-	rate = ath_rc_priv->valid_rate_index[0];
-
-	return rate;
-}
-
-static void ath_rc_rate_set_series(const struct ath_rate_table *rate_table,
-				   struct ieee80211_tx_rate *rate,
-				   struct ieee80211_tx_rate_control *txrc,
-				   u8 tries, u8 rix, int rtsctsenable)
-{
-	rate->count = tries;
-	rate->idx = rate_table->info[rix].ratecode;
-
-	if (txrc->rts || rtsctsenable)
-		rate->flags |= IEEE80211_TX_RC_USE_RTS_CTS;
-
-	if (WLAN_RC_PHY_HT(rate_table->info[rix].phy)) {
-		rate->flags |= IEEE80211_TX_RC_MCS;
-		if (WLAN_RC_PHY_40(rate_table->info[rix].phy) &&
-		    conf_is_ht40(&txrc->hw->conf))
-			rate->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH;
-		if (WLAN_RC_PHY_SGI(rate_table->info[rix].phy))
-			rate->flags |= IEEE80211_TX_RC_SHORT_GI;
-	}
-}
-
-static void ath_rc_rate_set_rtscts(struct ath_softc *sc,
-				   const struct ath_rate_table *rate_table,
-				   struct ieee80211_tx_info *tx_info)
-{
-	struct ieee80211_bss_conf *bss_conf;
-
-	if (!tx_info->control.vif)
-		return;
-	/*
-	 * For legacy frames, mac80211 takes care of CTS protection.
-	 */
-	if (!(tx_info->control.rates[0].flags & IEEE80211_TX_RC_MCS))
-		return;
-
-	bss_conf = &tx_info->control.vif->bss_conf;
-
-	if (!bss_conf->basic_rates)
-		return;
-
-	/*
-	 * For now, use the lowest allowed basic rate for HT frames.
-	 */
-	tx_info->control.rts_cts_rate_idx = __ffs(bss_conf->basic_rates);
-}
-
-static void ath_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta,
-			 struct ieee80211_tx_rate_control *txrc)
-{
-	struct ath_softc *sc = priv;
-	struct ath_rate_priv *ath_rc_priv = priv_sta;
-	const struct ath_rate_table *rate_table;
-	struct sk_buff *skb = txrc->skb;
-	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
-	struct ieee80211_tx_rate *rates = tx_info->control.rates;
-	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
-	__le16 fc = hdr->frame_control;
-	u8 try_per_rate, i = 0, rix;
-	int is_probe = 0;
-
-	if (rate_control_send_low(sta, priv_sta, txrc))
-		return;
-
-	/*
-	 * For Multi Rate Retry we use a different number of
-	 * retry attempt counts. This ends up looking like this:
-	 *
-	 * MRR[0] = 4
-	 * MRR[1] = 4
-	 * MRR[2] = 4
-	 * MRR[3] = 8
-	 *
-	 */
-	try_per_rate = 4;
-
-	rate_table = ath_rc_priv->rate_table;
-	rix = ath_rc_get_highest_rix(ath_rc_priv, &is_probe);
-
-	if (conf_is_ht(&sc->hw->conf) &&
-	    (sta->ht_cap.cap & IEEE80211_HT_CAP_LDPC_CODING))
-		tx_info->flags |= IEEE80211_TX_CTL_LDPC;
-
-	if (conf_is_ht(&sc->hw->conf) &&
-	    (sta->ht_cap.cap & IEEE80211_HT_CAP_TX_STBC))
-		tx_info->flags |= (1 << IEEE80211_TX_CTL_STBC_SHIFT);
-
-	if (is_probe) {
-		/*
-		 * Set one try for probe rates. For the
-		 * probes don't enable RTS.
-		 */
-		ath_rc_rate_set_series(rate_table, &rates[i++], txrc,
-				       1, rix, 0);
-		/*
-		 * Get the next tried/allowed rate.
-		 * No RTS for the next series after the probe rate.
-		 */
-		ath_rc_get_lower_rix(ath_rc_priv, rix, &rix);
-		ath_rc_rate_set_series(rate_table, &rates[i++], txrc,
-				       try_per_rate, rix, 0);
-
-		tx_info->flags |= IEEE80211_TX_CTL_RATE_CTRL_PROBE;
-	} else {
-		/*
-		 * Set the chosen rate. No RTS for first series entry.
-		 */
-		ath_rc_rate_set_series(rate_table, &rates[i++], txrc,
-				       try_per_rate, rix, 0);
-	}
-
-	for ( ; i < 4; i++) {
-		/*
-		 * Use twice the number of tries for the last MRR segment.
-		 */
-		if (i + 1 == 4)
-			try_per_rate = 8;
-
-		ath_rc_get_lower_rix(ath_rc_priv, rix, &rix);
-
-		/*
-		 * All other rates in the series have RTS enabled.
-		 */
-		ath_rc_rate_set_series(rate_table, &rates[i], txrc,
-				       try_per_rate, rix, 1);
-	}
-
-	/*
-	 * NB:Change rate series to enable aggregation when operating
-	 * at lower MCS rates. When first rate in series is MCS2
-	 * in HT40 @ 2.4GHz, series should look like:
-	 *
-	 * {MCS2, MCS1, MCS0, MCS0}.
-	 *
-	 * When first rate in series is MCS3 in HT20 @ 2.4GHz, series should
-	 * look like:
-	 *
-	 * {MCS3, MCS2, MCS1, MCS1}
-	 *
-	 * So, set fourth rate in series to be same as third one for
-	 * above conditions.
-	 */
-	if ((sc->hw->conf.chandef.chan->band == IEEE80211_BAND_2GHZ) &&
-	    (conf_is_ht(&sc->hw->conf))) {
-		u8 dot11rate = rate_table->info[rix].dot11rate;
-		u8 phy = rate_table->info[rix].phy;
-		if (i == 4 &&
-		    ((dot11rate == 2 && phy == WLAN_RC_PHY_HT_40_SS) ||
-		     (dot11rate == 3 && phy == WLAN_RC_PHY_HT_20_SS))) {
-			rates[3].idx = rates[2].idx;
-			rates[3].flags = rates[2].flags;
-		}
-	}
-
-	/*
-	 * Force hardware to use computed duration for next
-	 * fragment by disabling multi-rate retry, which
-	 * updates duration based on the multi-rate duration table.
-	 *
-	 * FIXME: Fix duration
-	 */
-	if (ieee80211_has_morefrags(fc) ||
-	    (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG)) {
-		rates[1].count = rates[2].count = rates[3].count = 0;
-		rates[1].idx = rates[2].idx = rates[3].idx = 0;
-		rates[0].count = ATH_TXMAXTRY;
-	}
-
-	ath_rc_rate_set_rtscts(sc, rate_table, tx_info);
-}
-
-static void ath_rc_update_per(struct ath_softc *sc,
-			      const struct ath_rate_table *rate_table,
-			      struct ath_rate_priv *ath_rc_priv,
-				  struct ieee80211_tx_info *tx_info,
-			      int tx_rate, int xretries, int retries,
-			      u32 now_msec)
-{
-	int count, n_bad_frames;
-	u8 last_per;
-	static const u32 nretry_to_per_lookup[10] = {
-		100 * 0 / 1,
-		100 * 1 / 4,
-		100 * 1 / 2,
-		100 * 3 / 4,
-		100 * 4 / 5,
-		100 * 5 / 6,
-		100 * 6 / 7,
-		100 * 7 / 8,
-		100 * 8 / 9,
-		100 * 9 / 10
-	};
-
-	last_per = ath_rc_priv->per[tx_rate];
-	n_bad_frames = tx_info->status.ampdu_len - tx_info->status.ampdu_ack_len;
-
-	if (xretries) {
-		if (xretries == 1) {
-			ath_rc_priv->per[tx_rate] += 30;
-			if (ath_rc_priv->per[tx_rate] > 100)
-				ath_rc_priv->per[tx_rate] = 100;
-		} else {
-			/* xretries == 2 */
-			count = ARRAY_SIZE(nretry_to_per_lookup);
-			if (retries >= count)
-				retries = count - 1;
-
-			/* new_PER = 7/8*old_PER + 1/8*(currentPER) */
-			ath_rc_priv->per[tx_rate] =
-				(u8)(last_per - (last_per >> 3) + (100 >> 3));
-		}
-
-		/* xretries == 1 or 2 */
-
-		if (ath_rc_priv->probe_rate == tx_rate)
-			ath_rc_priv->probe_rate = 0;
-
-	} else { /* xretries == 0 */
-		count = ARRAY_SIZE(nretry_to_per_lookup);
-		if (retries >= count)
-			retries = count - 1;
-
-		if (n_bad_frames) {
-			/* new_PER = 7/8*old_PER + 1/8*(currentPER)
-			 * Assuming that n_frames is not 0.  The current PER
-			 * from the retries is 100 * retries / (retries+1),
-			 * since the first retries attempts failed, and the
-			 * next one worked.  For the one that worked,
-			 * n_bad_frames subframes out of n_frames wored,
-			 * so the PER for that part is
-			 * 100 * n_bad_frames / n_frames, and it contributes
-			 * 100 * n_bad_frames / (n_frames * (retries+1)) to
-			 * the above PER.  The expression below is a
-			 * simplified version of the sum of these two terms.
-			 */
-			if (tx_info->status.ampdu_len > 0) {
-				int n_frames, n_bad_tries;
-				u8 cur_per, new_per;
-
-				n_bad_tries = retries * tx_info->status.ampdu_len +
-					n_bad_frames;
-				n_frames = tx_info->status.ampdu_len * (retries + 1);
-				cur_per = (100 * n_bad_tries / n_frames) >> 3;
-				new_per = (u8)(last_per - (last_per >> 3) + cur_per);
-				ath_rc_priv->per[tx_rate] = new_per;
-			}
-		} else {
-			ath_rc_priv->per[tx_rate] =
-				(u8)(last_per - (last_per >> 3) +
-				     (nretry_to_per_lookup[retries] >> 3));
-		}
-
-
-		/*
-		 * If we got at most one retry then increase the max rate if
-		 * this was a probe.  Otherwise, ignore the probe.
-		 */
-		if (ath_rc_priv->probe_rate && ath_rc_priv->probe_rate == tx_rate) {
-			if (retries > 0 || 2 * n_bad_frames > tx_info->status.ampdu_len) {
-				/*
-				 * Since we probed with just a single attempt,
-				 * any retries means the probe failed.  Also,
-				 * if the attempt worked, but more than half
-				 * the subframes were bad then also consider
-				 * the probe a failure.
-				 */
-				ath_rc_priv->probe_rate = 0;
-			} else {
-				u8 probe_rate = 0;
-
-				ath_rc_priv->rate_max_phy =
-					ath_rc_priv->probe_rate;
-				probe_rate = ath_rc_priv->probe_rate;
-
-				if (ath_rc_priv->per[probe_rate] > 30)
-					ath_rc_priv->per[probe_rate] = 20;
-
-				ath_rc_priv->probe_rate = 0;
-
-				/*
-				 * Since this probe succeeded, we allow the next
-				 * probe twice as soon.  This allows the maxRate
-				 * to move up faster if the probes are
-				 * successful.
-				 */
-				ath_rc_priv->probe_time =
-					now_msec - rate_table->probe_interval / 2;
-			}
-		}
-
-		if (retries > 0) {
-			/*
-			 * Don't update anything.  We don't know if
-			 * this was because of collisions or poor signal.
-			 */
-			ath_rc_priv->hw_maxretry_pktcnt = 0;
-		} else {
-			/*
-			 * It worked with no retries. First ignore bogus (small)
-			 * rssi_ack values.
-			 */
-			if (tx_rate == ath_rc_priv->rate_max_phy &&
-			    ath_rc_priv->hw_maxretry_pktcnt < 255) {
-				ath_rc_priv->hw_maxretry_pktcnt++;
-			}
-
-		}
-	}
-}
-
-static void ath_rc_update_ht(struct ath_softc *sc,
-			     struct ath_rate_priv *ath_rc_priv,
-			     struct ieee80211_tx_info *tx_info,
-			     int tx_rate, int xretries, int retries)
-{
-	u32 now_msec = jiffies_to_msecs(jiffies);
-	int rate;
-	u8 last_per;
-	const struct ath_rate_table *rate_table = ath_rc_priv->rate_table;
-	int size = ath_rc_priv->rate_table_size;
-
-	if ((tx_rate < 0) || (tx_rate > rate_table->rate_cnt))
-		return;
-
-	last_per = ath_rc_priv->per[tx_rate];
-
-	/* Update PER first */
-	ath_rc_update_per(sc, rate_table, ath_rc_priv,
-			  tx_info, tx_rate, xretries,
-			  retries, now_msec);
-
-	/*
-	 * If this rate looks bad (high PER) then stop using it for
-	 * a while (except if we are probing).
-	 */
-	if (ath_rc_priv->per[tx_rate] >= 55 && tx_rate > 0 &&
-	    rate_table->info[tx_rate].ratekbps <=
-	    rate_table->info[ath_rc_priv->rate_max_phy].ratekbps) {
-		ath_rc_get_lower_rix(ath_rc_priv, (u8)tx_rate,
-				     &ath_rc_priv->rate_max_phy);
-
-		/* Don't probe for a little while. */
-		ath_rc_priv->probe_time = now_msec;
-	}
-
-	/* Make sure the rates below this have lower PER */
-	/* Monotonicity is kept only for rates below the current rate. */
-	if (ath_rc_priv->per[tx_rate] < last_per) {
-		for (rate = tx_rate - 1; rate >= 0; rate--) {
-
-			if (ath_rc_priv->per[rate] >
-			    ath_rc_priv->per[rate+1]) {
-				ath_rc_priv->per[rate] =
-					ath_rc_priv->per[rate+1];
-			}
-		}
-	}
-
-	/* Maintain monotonicity for rates above the current rate */
-	for (rate = tx_rate; rate < size - 1; rate++) {
-		if (ath_rc_priv->per[rate+1] <
-		    ath_rc_priv->per[rate])
-			ath_rc_priv->per[rate+1] =
-				ath_rc_priv->per[rate];
-	}
-
-	/* Every so often, we reduce the thresholds
-	 * and PER (different for CCK and OFDM). */
-	if (now_msec - ath_rc_priv->per_down_time >=
-	    rate_table->probe_interval) {
-		for (rate = 0; rate < size; rate++) {
-			ath_rc_priv->per[rate] =
-				7 * ath_rc_priv->per[rate] / 8;
-		}
-
-		ath_rc_priv->per_down_time = now_msec;
-	}
-
-	ath_debug_stat_retries(ath_rc_priv, tx_rate, xretries, retries,
-			       ath_rc_priv->per[tx_rate]);
-
-}
-
-static void ath_rc_tx_status(struct ath_softc *sc,
-			     struct ath_rate_priv *ath_rc_priv,
-			     struct sk_buff *skb)
-{
-	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
-	struct ieee80211_tx_rate *rates = tx_info->status.rates;
-	struct ieee80211_tx_rate *rate;
-	int final_ts_idx = 0, xretries = 0, long_retry = 0;
-	u8 flags;
-	u32 i = 0, rix;
-
-	for (i = 0; i < sc->hw->max_rates; i++) {
-		rate = &tx_info->status.rates[i];
-		if (rate->idx < 0 || !rate->count)
-			break;
-
-		final_ts_idx = i;
-		long_retry = rate->count - 1;
-	}
-
-	if (!(tx_info->flags & IEEE80211_TX_STAT_ACK))
-		xretries = 1;
-
-	/*
-	 * If the first rate is not the final index, there
-	 * are intermediate rate failures to be processed.
-	 */
-	if (final_ts_idx != 0) {
-		for (i = 0; i < final_ts_idx ; i++) {
-			if (rates[i].count != 0 && (rates[i].idx >= 0)) {
-				flags = rates[i].flags;
-
-				/* If HT40 and we have switched mode from
-				 * 40 to 20 => don't update */
-
-				if ((flags & IEEE80211_TX_RC_40_MHZ_WIDTH) &&
-				    !(ath_rc_priv->ht_cap & WLAN_RC_40_FLAG))
-					return;
-
-				rix = ath_rc_get_rateindex(ath_rc_priv, &rates[i]);
-				ath_rc_update_ht(sc, ath_rc_priv, tx_info,
-						 rix, xretries ? 1 : 2,
-						 rates[i].count);
-			}
-		}
-	}
-
-	flags = rates[final_ts_idx].flags;
-
-	/* If HT40 and we have switched mode from 40 to 20 => don't update */
-	if ((flags & IEEE80211_TX_RC_40_MHZ_WIDTH) &&
-	    !(ath_rc_priv->ht_cap & WLAN_RC_40_FLAG))
-		return;
-
-	rix = ath_rc_get_rateindex(ath_rc_priv, &rates[final_ts_idx]);
-	ath_rc_update_ht(sc, ath_rc_priv, tx_info, rix, xretries, long_retry);
-	ath_debug_stat_rc(ath_rc_priv, rix);
-}
-
-static const
-struct ath_rate_table *ath_choose_rate_table(struct ath_softc *sc,
-					     enum ieee80211_band band,
-					     bool is_ht)
-{
-	switch(band) {
-	case IEEE80211_BAND_2GHZ:
-		if (is_ht)
-			return &ar5416_11ng_ratetable;
-		return &ar5416_11g_ratetable;
-	case IEEE80211_BAND_5GHZ:
-		if (is_ht)
-			return &ar5416_11na_ratetable;
-		return &ar5416_11a_ratetable;
-	default:
-		return NULL;
-	}
-}
-
-static void ath_rc_init(struct ath_softc *sc,
-			struct ath_rate_priv *ath_rc_priv)
-{
-	const struct ath_rate_table *rate_table = ath_rc_priv->rate_table;
-	struct ath_rateset *rateset = &ath_rc_priv->neg_rates;
-	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
-	u8 i, j, k, hi = 0, hthi = 0;
-
-	ath_rc_priv->rate_table_size = RATE_TABLE_SIZE;
-
-	for (i = 0 ; i < ath_rc_priv->rate_table_size; i++) {
-		ath_rc_priv->per[i] = 0;
-		ath_rc_priv->valid_rate_index[i] = 0;
-	}
-
-	for (i = 0; i < WLAN_RC_PHY_MAX; i++) {
-		for (j = 0; j < RATE_TABLE_SIZE; j++)
-			ath_rc_priv->valid_phy_rateidx[i][j] = 0;
-		ath_rc_priv->valid_phy_ratecnt[i] = 0;
-	}
-
-	if (!rateset->rs_nrates) {
-		hi = ath_rc_init_validrates(ath_rc_priv);
-	} else {
-		hi = ath_rc_setvalid_rates(ath_rc_priv, true);
-
-		if (ath_rc_priv->ht_cap & WLAN_RC_HT_FLAG)
-			hthi = ath_rc_setvalid_rates(ath_rc_priv, false);
-
-		hi = max(hi, hthi);
-	}
-
-	ath_rc_priv->rate_table_size = hi + 1;
-	ath_rc_priv->rate_max_phy = 0;
-	WARN_ON(ath_rc_priv->rate_table_size > RATE_TABLE_SIZE);
-
-	for (i = 0, k = 0; i < WLAN_RC_PHY_MAX; i++) {
-		for (j = 0; j < ath_rc_priv->valid_phy_ratecnt[i]; j++) {
-			ath_rc_priv->valid_rate_index[k++] =
-				ath_rc_priv->valid_phy_rateidx[i][j];
-		}
-
-		if (!ath_rc_valid_phyrate(i, rate_table->initial_ratemax, 1) ||
-		    !ath_rc_priv->valid_phy_ratecnt[i])
-			continue;
-
-		ath_rc_priv->rate_max_phy = ath_rc_priv->valid_phy_rateidx[i][j-1];
-	}
-	WARN_ON(ath_rc_priv->rate_table_size > RATE_TABLE_SIZE);
-	WARN_ON(k > RATE_TABLE_SIZE);
-
-	ath_rc_priv->max_valid_rate = k;
-	ath_rc_sort_validrates(ath_rc_priv);
-	ath_rc_priv->rate_max_phy = (k > 4) ?
-		ath_rc_priv->valid_rate_index[k-4] :
-		ath_rc_priv->valid_rate_index[k-1];
-
-	ath_dbg(common, CONFIG, "RC Initialized with capabilities: 0x%x\n",
-		ath_rc_priv->ht_cap);
-}
-
-static u8 ath_rc_build_ht_caps(struct ath_softc *sc, struct ieee80211_sta *sta)
-{
-	u8 caps = 0;
-
-	if (sta->ht_cap.ht_supported) {
-		caps = WLAN_RC_HT_FLAG;
-		if (sta->ht_cap.mcs.rx_mask[1] && sta->ht_cap.mcs.rx_mask[2])
-			caps |= WLAN_RC_TS_FLAG | WLAN_RC_DS_FLAG;
-		else if (sta->ht_cap.mcs.rx_mask[1])
-			caps |= WLAN_RC_DS_FLAG;
-		if (sta->bandwidth >= IEEE80211_STA_RX_BW_40) {
-			caps |= WLAN_RC_40_FLAG;
-			if (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40)
-				caps |= WLAN_RC_SGI_FLAG;
-		} else {
-			if (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20)
-				caps |= WLAN_RC_SGI_FLAG;
-		}
-	}
-
-	return caps;
-}
-
-static bool ath_tx_aggr_check(struct ath_softc *sc, struct ieee80211_sta *sta,
-			      u8 tidno)
-{
-	struct ath_node *an = (struct ath_node *)sta->drv_priv;
-	struct ath_atx_tid *txtid;
-
-	if (!sta->ht_cap.ht_supported)
-		return false;
-
-	txtid = ATH_AN_2_TID(an, tidno);
-	return !txtid->active;
-}
-
-
-/***********************************/
-/* mac80211 Rate Control callbacks */
-/***********************************/
-
-static void ath_tx_status(void *priv, struct ieee80211_supported_band *sband,
-			  struct ieee80211_sta *sta, void *priv_sta,
-			  struct sk_buff *skb)
-{
-	struct ath_softc *sc = priv;
-	struct ath_rate_priv *ath_rc_priv = priv_sta;
-	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
-	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
-	__le16 fc = hdr->frame_control;
-
-	if (!priv_sta || !ieee80211_is_data(fc))
-		return;
-
-	/* This packet was aggregated but doesn't carry status info */
-	if ((tx_info->flags & IEEE80211_TX_CTL_AMPDU) &&
-	    !(tx_info->flags & IEEE80211_TX_STAT_AMPDU))
-		return;
-
-	if (tx_info->flags & IEEE80211_TX_STAT_TX_FILTERED)
-		return;
-
-	ath_rc_tx_status(sc, ath_rc_priv, skb);
-
-	/* Check if aggregation has to be enabled for this tid */
-	if (conf_is_ht(&sc->hw->conf) &&
-	    !(skb->protocol == cpu_to_be16(ETH_P_PAE))) {
-		if (ieee80211_is_data_qos(fc) &&
-		    skb_get_queue_mapping(skb) != IEEE80211_AC_VO) {
-			u8 *qc, tid;
-
-			qc = ieee80211_get_qos_ctl(hdr);
-			tid = qc[0] & 0xf;
-
-			if(ath_tx_aggr_check(sc, sta, tid))
-				ieee80211_start_tx_ba_session(sta, tid, 0);
-		}
-	}
-}
-
-static void ath_rate_init(void *priv, struct ieee80211_supported_band *sband,
-			  struct cfg80211_chan_def *chandef,
-                          struct ieee80211_sta *sta, void *priv_sta)
-{
-	struct ath_softc *sc = priv;
-	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
-	struct ath_rate_priv *ath_rc_priv = priv_sta;
-	int i, j = 0;
-	u32 rate_flags = ieee80211_chandef_rate_flags(&sc->hw->conf.chandef);
-
-	for (i = 0; i < sband->n_bitrates; i++) {
-		if (sta->supp_rates[sband->band] & BIT(i)) {
-			if ((rate_flags & sband->bitrates[i].flags)
-			    != rate_flags)
-				continue;
-
-			ath_rc_priv->neg_rates.rs_rates[j]
-				= (sband->bitrates[i].bitrate * 2) / 10;
-			j++;
-		}
-	}
-	ath_rc_priv->neg_rates.rs_nrates = j;
-
-	if (sta->ht_cap.ht_supported) {
-		for (i = 0, j = 0; i < 77; i++) {
-			if (sta->ht_cap.mcs.rx_mask[i/8] & (1<<(i%8)))
-				ath_rc_priv->neg_ht_rates.rs_rates[j++] = i;
-			if (j == ATH_RATE_MAX)
-				break;
-		}
-		ath_rc_priv->neg_ht_rates.rs_nrates = j;
-	}
-
-	ath_rc_priv->rate_table = ath_choose_rate_table(sc, sband->band,
-							sta->ht_cap.ht_supported);
-	if (!ath_rc_priv->rate_table) {
-		ath_err(common, "No rate table chosen\n");
-		return;
-	}
-
-	ath_rc_priv->ht_cap = ath_rc_build_ht_caps(sc, sta);
-	ath_rc_init(sc, priv_sta);
-}
-
-static void ath_rate_update(void *priv, struct ieee80211_supported_band *sband,
-			    struct cfg80211_chan_def *chandef,
-			    struct ieee80211_sta *sta, void *priv_sta,
-			    u32 changed)
-{
-	struct ath_softc *sc = priv;
-	struct ath_rate_priv *ath_rc_priv = priv_sta;
-
-	if (changed & IEEE80211_RC_BW_CHANGED) {
-		ath_rc_priv->ht_cap = ath_rc_build_ht_caps(sc, sta);
-		ath_rc_init(sc, priv_sta);
-
-		ath_dbg(ath9k_hw_common(sc->sc_ah), CONFIG,
-			"Operating Bandwidth changed to: %d\n",
-			sc->hw->conf.chandef.width);
-	}
-}
-
-#if defined(CONFIG_MAC80211_DEBUGFS) && defined(CONFIG_ATH9K_DEBUGFS)
-
-void ath_debug_stat_rc(struct ath_rate_priv *rc, int final_rate)
-{
-	struct ath_rc_stats *stats;
-
-	stats = &rc->rcstats[final_rate];
-	stats->success++;
-}
-
-void ath_debug_stat_retries(struct ath_rate_priv *rc, int rix,
-			    int xretries, int retries, u8 per)
-{
-	struct ath_rc_stats *stats = &rc->rcstats[rix];
-
-	stats->xretries += xretries;
-	stats->retries += retries;
-	stats->per = per;
-}
-
-static ssize_t read_file_rcstat(struct file *file, char __user *user_buf,
-				size_t count, loff_t *ppos)
-{
-	struct ath_rate_priv *rc = file->private_data;
-	char *buf;
-	unsigned int len = 0, max;
-	int rix;
-	ssize_t retval;
-
-	if (rc->rate_table == NULL)
-		return 0;
-
-	max = 80 + rc->rate_table_size * 1024 + 1;
-	buf = kmalloc(max, GFP_KERNEL);
-	if (buf == NULL)
-		return -ENOMEM;
-
-	len += sprintf(buf, "%6s %6s %6s "
-		       "%10s %10s %10s %10s\n",
-		       "HT", "MCS", "Rate",
-		       "Success", "Retries", "XRetries", "PER");
-
-	for (rix = 0; rix < rc->max_valid_rate; rix++) {
-		u8 i = rc->valid_rate_index[rix];
-		u32 ratekbps = rc->rate_table->info[i].ratekbps;
-		struct ath_rc_stats *stats = &rc->rcstats[i];
-		char mcs[5];
-		char htmode[5];
-		int used_mcs = 0, used_htmode = 0;
-
-		if (WLAN_RC_PHY_HT(rc->rate_table->info[i].phy)) {
-			used_mcs = scnprintf(mcs, 5, "%d",
-					     rc->rate_table->info[i].ratecode);
-
-			if (WLAN_RC_PHY_40(rc->rate_table->info[i].phy))
-				used_htmode = scnprintf(htmode, 5, "HT40");
-			else if (WLAN_RC_PHY_20(rc->rate_table->info[i].phy))
-				used_htmode = scnprintf(htmode, 5, "HT20");
-			else
-				used_htmode = scnprintf(htmode, 5, "????");
-		}
-
-		mcs[used_mcs] = '\0';
-		htmode[used_htmode] = '\0';
-
-		len += scnprintf(buf + len, max - len,
-				 "%6s %6s %3u.%d: "
-				 "%10u %10u %10u %10u\n",
-				 htmode,
-				 mcs,
-				 ratekbps / 1000,
-				 (ratekbps % 1000) / 100,
-				 stats->success,
-				 stats->retries,
-				 stats->xretries,
-				 stats->per);
-	}
-
-	if (len > max)
-		len = max;
-
-	retval = simple_read_from_buffer(user_buf, count, ppos, buf, len);
-	kfree(buf);
-	return retval;
-}
-
-static const struct file_operations fops_rcstat = {
-	.read = read_file_rcstat,
-	.open = simple_open,
-	.owner = THIS_MODULE
-};
-
-static void ath_rate_add_sta_debugfs(void *priv, void *priv_sta,
-				     struct dentry *dir)
-{
-	struct ath_rate_priv *rc = priv_sta;
-	rc->debugfs_rcstats = debugfs_create_file("rc_stats", S_IRUGO,
-						  dir, rc, &fops_rcstat);
-}
-
-static void ath_rate_remove_sta_debugfs(void *priv, void *priv_sta)
-{
-	struct ath_rate_priv *rc = priv_sta;
-	debugfs_remove(rc->debugfs_rcstats);
-}
-
-#endif /* CONFIG_MAC80211_DEBUGFS && CONFIG_ATH9K_DEBUGFS */
-
-static void *ath_rate_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir)
-{
-	return hw->priv;
-}
-
-static void ath_rate_free(void *priv)
-{
-	return;
-}
-
-static void *ath_rate_alloc_sta(void *priv, struct ieee80211_sta *sta, gfp_t gfp)
-{
-	return kzalloc(sizeof(struct ath_rate_priv), gfp);
-}
-
-static void ath_rate_free_sta(void *priv, struct ieee80211_sta *sta,
-			      void *priv_sta)
-{
-	struct ath_rate_priv *rate_priv = priv_sta;
-	kfree(rate_priv);
-}
-
-static const struct rate_control_ops ath_rate_ops = {
-	.name = "ath9k_rate_control",
-	.tx_status = ath_tx_status,
-	.get_rate = ath_get_rate,
-	.rate_init = ath_rate_init,
-	.rate_update = ath_rate_update,
-	.alloc = ath_rate_alloc,
-	.free = ath_rate_free,
-	.alloc_sta = ath_rate_alloc_sta,
-	.free_sta = ath_rate_free_sta,
-
-#if defined(CONFIG_MAC80211_DEBUGFS) && defined(CONFIG_ATH9K_DEBUGFS)
-	.add_sta_debugfs = ath_rate_add_sta_debugfs,
-	.remove_sta_debugfs = ath_rate_remove_sta_debugfs,
-#endif
-};
-
-int ath_rate_control_register(void)
-{
-	return ieee80211_rate_control_register(&ath_rate_ops);
-}
-
-void ath_rate_control_unregister(void)
-{
-	ieee80211_rate_control_unregister(&ath_rate_ops);
-}
diff --git a/drivers/net/wireless/ath/ath9k/rc.h b/drivers/net/wireless/ath/ath9k/rc.h
deleted file mode 100644
index b9a87383cb43..000000000000
--- a/drivers/net/wireless/ath/ath9k/rc.h
+++ /dev/null
@@ -1,248 +0,0 @@
-/*
- * Copyright (c) 2004 Sam Leffler, Errno Consulting
- * Copyright (c) 2004 Video54 Technologies, Inc.
- * Copyright (c) 2008-2011 Atheros Communications Inc.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#ifndef RC_H
-#define RC_H
-
-#include "hw.h"
-
-struct ath_softc;
-
-#define ATH_RATE_MAX     30
-#define RATE_TABLE_SIZE  72
-
-#define RC_INVALID	0x0000
-#define RC_LEGACY	0x0001
-#define RC_SS		0x0002
-#define RC_DS		0x0004
-#define RC_TS		0x0008
-#define RC_HT_20	0x0010
-#define RC_HT_40	0x0020
-
-#define RC_STREAM_MASK	0xe
-#define RC_DS_OR_LATER(f)	((((f) & RC_STREAM_MASK) == RC_DS) || \
-				(((f) & RC_STREAM_MASK) == (RC_DS | RC_TS)))
-#define RC_TS_ONLY(f)		(((f) & RC_STREAM_MASK) == RC_TS)
-#define RC_SS_OR_LEGACY(f)	((f) & (RC_SS | RC_LEGACY))
-
-#define RC_HT_2040		(RC_HT_20 | RC_HT_40)
-#define RC_ALL_STREAM		(RC_SS | RC_DS | RC_TS)
-#define RC_L_SD			(RC_LEGACY | RC_SS | RC_DS)
-#define RC_L_SDT		(RC_LEGACY | RC_SS | RC_DS | RC_TS)
-#define RC_HT_S_20		(RC_HT_20 | RC_SS)
-#define RC_HT_D_20		(RC_HT_20 | RC_DS)
-#define RC_HT_T_20		(RC_HT_20 | RC_TS)
-#define RC_HT_S_40		(RC_HT_40 | RC_SS)
-#define RC_HT_D_40		(RC_HT_40 | RC_DS)
-#define RC_HT_T_40		(RC_HT_40 | RC_TS)
-
-#define RC_HT_SD_20		(RC_HT_20 | RC_SS | RC_DS)
-#define RC_HT_DT_20		(RC_HT_20 | RC_DS | RC_TS)
-#define RC_HT_SD_40		(RC_HT_40 | RC_SS | RC_DS)
-#define RC_HT_DT_40		(RC_HT_40 | RC_DS | RC_TS)
-
-#define RC_HT_SD_2040		(RC_HT_2040 | RC_SS | RC_DS)
-#define RC_HT_SDT_2040		(RC_HT_2040 | RC_SS | RC_DS | RC_TS)
-
-#define RC_HT_SDT_20		(RC_HT_20 | RC_SS | RC_DS | RC_TS)
-#define RC_HT_SDT_40		(RC_HT_40 | RC_SS | RC_DS | RC_TS)
-
-#define RC_ALL			(RC_LEGACY | RC_HT_2040 | RC_ALL_STREAM)
-
-enum {
-	WLAN_RC_PHY_OFDM,
-	WLAN_RC_PHY_CCK,
-	WLAN_RC_PHY_HT_20_SS,
-	WLAN_RC_PHY_HT_20_DS,
-	WLAN_RC_PHY_HT_20_TS,
-	WLAN_RC_PHY_HT_40_SS,
-	WLAN_RC_PHY_HT_40_DS,
-	WLAN_RC_PHY_HT_40_TS,
-	WLAN_RC_PHY_HT_20_SS_HGI,
-	WLAN_RC_PHY_HT_20_DS_HGI,
-	WLAN_RC_PHY_HT_20_TS_HGI,
-	WLAN_RC_PHY_HT_40_SS_HGI,
-	WLAN_RC_PHY_HT_40_DS_HGI,
-	WLAN_RC_PHY_HT_40_TS_HGI,
-	WLAN_RC_PHY_MAX
-};
-
-#define WLAN_RC_PHY_DS(_phy)   ((_phy == WLAN_RC_PHY_HT_20_DS)		\
-				|| (_phy == WLAN_RC_PHY_HT_40_DS)	\
-				|| (_phy == WLAN_RC_PHY_HT_20_DS_HGI)	\
-				|| (_phy == WLAN_RC_PHY_HT_40_DS_HGI))
-#define WLAN_RC_PHY_TS(_phy)   ((_phy == WLAN_RC_PHY_HT_20_TS)		\
-				|| (_phy == WLAN_RC_PHY_HT_40_TS)	\
-				|| (_phy == WLAN_RC_PHY_HT_20_TS_HGI)	\
-				|| (_phy == WLAN_RC_PHY_HT_40_TS_HGI))
-#define WLAN_RC_PHY_20(_phy)   ((_phy == WLAN_RC_PHY_HT_20_SS)		\
-				|| (_phy == WLAN_RC_PHY_HT_20_DS)	\
-				|| (_phy == WLAN_RC_PHY_HT_20_TS)	\
-				|| (_phy == WLAN_RC_PHY_HT_20_SS_HGI)	\
-				|| (_phy == WLAN_RC_PHY_HT_20_DS_HGI)	\
-				|| (_phy == WLAN_RC_PHY_HT_20_TS_HGI))
-#define WLAN_RC_PHY_40(_phy)   ((_phy == WLAN_RC_PHY_HT_40_SS)		\
-				|| (_phy == WLAN_RC_PHY_HT_40_DS)	\
-				|| (_phy == WLAN_RC_PHY_HT_40_TS)	\
-				|| (_phy == WLAN_RC_PHY_HT_40_SS_HGI)	\
-				|| (_phy == WLAN_RC_PHY_HT_40_DS_HGI)	\
-				|| (_phy == WLAN_RC_PHY_HT_40_TS_HGI))
-#define WLAN_RC_PHY_SGI(_phy)  ((_phy == WLAN_RC_PHY_HT_20_SS_HGI)      \
-				|| (_phy == WLAN_RC_PHY_HT_20_DS_HGI)   \
-				|| (_phy == WLAN_RC_PHY_HT_20_TS_HGI)   \
-				|| (_phy == WLAN_RC_PHY_HT_40_SS_HGI)   \
-				|| (_phy == WLAN_RC_PHY_HT_40_DS_HGI)   \
-				|| (_phy == WLAN_RC_PHY_HT_40_TS_HGI))
-
-#define WLAN_RC_PHY_HT(_phy)    (_phy >= WLAN_RC_PHY_HT_20_SS)
-
-#define WLAN_RC_CAP_MODE(capflag) (((capflag & WLAN_RC_HT_FLAG) ?	\
-	((capflag & WLAN_RC_40_FLAG) ? RC_HT_40 : RC_HT_20) : RC_LEGACY))
-
-#define WLAN_RC_CAP_STREAM(capflag) (((capflag & WLAN_RC_TS_FLAG) ?	\
-	(RC_TS) : ((capflag & WLAN_RC_DS_FLAG) ? RC_DS : RC_SS)))
-
-/* Return TRUE if flag supports HT20 && client supports HT20 or
- * return TRUE if flag supports HT40 && client supports HT40.
- * This is used becos some rates overlap between HT20/HT40.
- */
-#define WLAN_RC_PHY_HT_VALID(flag, capflag)			\
-	(((flag & RC_HT_20) && !(capflag & WLAN_RC_40_FLAG)) || \
-	 ((flag & RC_HT_40) && (capflag & WLAN_RC_40_FLAG)))
-
-#define WLAN_RC_DS_FLAG         (0x01)
-#define WLAN_RC_TS_FLAG         (0x02)
-#define WLAN_RC_40_FLAG         (0x04)
-#define WLAN_RC_SGI_FLAG        (0x08)
-#define WLAN_RC_HT_FLAG         (0x10)
-
-/**
- * struct ath_rate_table - Rate Control table
- * @rate_cnt: total number of rates for the given wireless mode
- * @mcs_start: MCS rate index offset
- * @rate_flags: Rate Control flags
- * @phy: CCK/OFDM/HT20/HT40
- * @ratekbps: rate in Kbits per second
- * @user_ratekbps: user rate in Kbits per second
- * @ratecode: rate that goes into HW descriptors
- * @dot11rate: value that goes into supported
- * 	rates info element of MLME
- * @ctrl_rate: Index of next lower basic rate, used for duration computation
- * @cw40index: Index of rates having 40MHz channel width
- * @sgi_index: Index of rates having Short Guard Interval
- * @ht_index: high throughput rates having 40MHz channel width and
- * 	Short Guard Interval
- * @probe_interval: interval for rate control to probe for other rates
- * @initial_ratemax: initial ratemax value
- */
-struct ath_rate_table {
-	int rate_cnt;
-	int mcs_start;
-	struct {
-		u16 rate_flags;
-		u8 phy;
-		u32 ratekbps;
-		u32 user_ratekbps;
-		u8 ratecode;
-		u8 dot11rate;
-	} info[RATE_TABLE_SIZE];
-	u32 probe_interval;
-	u8 initial_ratemax;
-};
-
-struct ath_rateset {
-	u8 rs_nrates;
-	u8 rs_rates[ATH_RATE_MAX];
-};
-
-struct ath_rc_stats {
-	u32 success;
-	u32 retries;
-	u32 xretries;
-	u8 per;
-};
-
-/**
- * struct ath_rate_priv - Rate Control priv data
- * @state: RC state
- * @probe_rate: rate we are probing at
- * @probe_time: msec timestamp for last probe
- * @hw_maxretry_pktcnt: num of packets since we got HW max retry error
- * @max_valid_rate: maximum number of valid rate
- * @per_down_time: msec timestamp for last PER down step
- * @valid_phy_ratecnt: valid rate count
- * @rate_max_phy: phy index for the max rate
- * @per: PER for every valid rate in %
- * @probe_interval: interval for ratectrl to probe for other rates
- * @ht_cap: HT capabilities
- * @neg_rates: Negotatied rates
- * @neg_ht_rates: Negotiated HT rates
- */
-struct ath_rate_priv {
-	u8 rate_table_size;
-	u8 probe_rate;
-	u8 hw_maxretry_pktcnt;
-	u8 max_valid_rate;
-	u8 valid_rate_index[RATE_TABLE_SIZE];
-	u8 ht_cap;
-	u8 valid_phy_ratecnt[WLAN_RC_PHY_MAX];
-	u8 valid_phy_rateidx[WLAN_RC_PHY_MAX][RATE_TABLE_SIZE];
-	u8 rate_max_phy;
-	u8 per[RATE_TABLE_SIZE];
-	u32 probe_time;
-	u32 per_down_time;
-	u32 probe_interval;
-	struct ath_rateset neg_rates;
-	struct ath_rateset neg_ht_rates;
-	const struct ath_rate_table *rate_table;
-
-#if defined(CONFIG_MAC80211_DEBUGFS) && defined(CONFIG_ATH9K_DEBUGFS)
-	struct dentry *debugfs_rcstats;
-	struct ath_rc_stats rcstats[RATE_TABLE_SIZE];
-#endif
-};
-
-#if defined(CONFIG_MAC80211_DEBUGFS) && defined(CONFIG_ATH9K_DEBUGFS)
-void ath_debug_stat_rc(struct ath_rate_priv *rc, int final_rate);
-void ath_debug_stat_retries(struct ath_rate_priv *rc, int rix,
-			    int xretries, int retries, u8 per);
-#else
-static inline void ath_debug_stat_rc(struct ath_rate_priv *rc, int final_rate)
-{
-}
-static inline void ath_debug_stat_retries(struct ath_rate_priv *rc, int rix,
-					  int xretries, int retries, u8 per)
-{
-}
-#endif
-
-#ifdef CONFIG_ATH9K_LEGACY_RATE_CONTROL
-int ath_rate_control_register(void);
-void ath_rate_control_unregister(void);
-#else
-static inline int ath_rate_control_register(void)
-{
-	return 0;
-}
-
-static inline void ath_rate_control_unregister(void)
-{
-}
-#endif
-
-#endif /* RC_H */
-- 
cgit v1.2.2


From 98f99eeae98047bc195bcc7510eae4f0cf3658a0 Mon Sep 17 00:00:00 2001
From: Masaki TAGAWA <masaki@club.kyutech.ac.jp>
Date: Thu, 6 Feb 2014 14:06:24 +0900
Subject: ath9k_htc: Add device ID for Buffalo WLI-UV-AG300P

Buffalo WLI-UV-AG300P is almost the same as Sony UWA-BR100.

Signed-off-by: Masaki TAGAWA <masaki@club.kyutech.ac.jp>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/hif_usb.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index 6d5d716adc1b..8e7153b186ed 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -54,6 +54,8 @@ static struct usb_device_id ath9k_hif_usb_ids[] = {
 	  .driver_info = AR9280_USB },  /* SMC Networks */
 	{ USB_DEVICE(0x0411, 0x017f),
 	  .driver_info = AR9280_USB },  /* Sony UWA-BR100 */
+	{ USB_DEVICE(0x0411, 0x0197),
+	  .driver_info = AR9280_USB },  /* Buffalo WLI-UV-AG300P */
 	{ USB_DEVICE(0x04da, 0x3904),
 	  .driver_info = AR9280_USB },
 
-- 
cgit v1.2.2


From 86d77b4c457294bfede4e3d087c2ed3aaab6c4fc Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Fri, 7 Feb 2014 10:29:49 +0530
Subject: ath9k: Fix IQ cal post processing for SoC

Calibration data is not reused for SoC chips, so
call ar9003_hw_tx_iq_cal_post_proc() with the correct
argument. The 'is_reusable' flag is currently used
only for PC-OEM chips, but it makes things clearer to
specify it explicity.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ar9003_calib.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
index 1537f426957e..53f78951c9f2 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -1458,7 +1458,7 @@ static bool ar9003_hw_init_cal_soc(struct ath_hw *ah,
 	struct ath_common *common = ath9k_hw_common(ah);
 	struct ath9k_hw_cal_data *caldata = ah->caldata;
 	bool txiqcal_done = false;
-	bool is_reusable = true, status = true;
+	bool status = true;
 	bool run_agc_cal = false, sep_iq_cal = false;
 
 	/* Use chip chainmask only for calibration */
@@ -1528,7 +1528,7 @@ skip_tx_iqcal:
 	}
 
 	if (txiqcal_done)
-		ar9003_hw_tx_iq_cal_post_proc(ah, is_reusable);
+		ar9003_hw_tx_iq_cal_post_proc(ah, false);
 
 	/* Revert chainmask to runtime parameters */
 	ar9003_hw_set_chain_masks(ah, ah->rxchainmask, ah->txchainmask);
-- 
cgit v1.2.2


From 9fded99ad7b94eae51d6d12c7016157deeedbb65 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Fri, 7 Feb 2014 10:29:50 +0530
Subject: ath9k: Check explicitly for IQ calibration

In chips like AR955x, the initvals contain the information
whether IQ calibration is to be done in the HW when an
AGC calibration is triggered. Check if IQ-CAL is enabled
in the initvals before flagging 'txiqcal_done' as true.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ar9003_calib.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
index 53f78951c9f2..834295d060ab 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -1482,7 +1482,12 @@ static bool ar9003_hw_init_cal_soc(struct ath_hw *ah,
 	 * AGC calibration. Specifically, AR9550 in SoC chips.
 	 */
 	if (ah->enabled_cals & TX_IQ_ON_AGC_CAL) {
-		txiqcal_done = true;
+		if (REG_READ_FIELD(ah, AR_PHY_TX_IQCAL_CONTROL_0,
+				   AR_PHY_TX_IQCAL_CONTROL_0_ENABLE_TXIQ_CAL)) {
+				txiqcal_done = true;
+		} else {
+			txiqcal_done = false;
+		}
 		run_agc_cal = true;
 	} else {
 		sep_iq_cal = true;
-- 
cgit v1.2.2


From 8c2213876e8e051d22f7cb9bcbb5ce3da3b9b41f Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Fri, 7 Feb 2014 10:29:51 +0530
Subject: ath9k: Rename ar9003_hw_tx_iqcal_load_avg_2_passes

Use ar9003_hw_tx_iq_cal_outlier_detection instead.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ar9003_calib.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
index 834295d060ab..b3f7ea7e213a 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -883,9 +883,9 @@ static void ar9003_hw_detect_outlier(int *mp_coeff, int nmeasurement,
 	}
 }
 
-static void ar9003_hw_tx_iqcal_load_avg_2_passes(struct ath_hw *ah,
-						 struct coeff *coeff,
-						 bool is_reusable)
+static void ar9003_hw_tx_iq_cal_outlier_detection(struct ath_hw *ah,
+						  struct coeff *coeff,
+						  bool is_reusable)
 {
 	int i, im, nmeasurement;
 	u32 tx_corr_coeff[MAX_MEASUREMENT][AR9300_MAX_CHAINS];
@@ -1072,7 +1072,7 @@ static void ar9003_hw_tx_iq_cal_post_proc(struct ath_hw *ah, bool is_reusable)
 				coeff.phs_coeff[i][im] -= 128;
 		}
 	}
-	ar9003_hw_tx_iqcal_load_avg_2_passes(ah, &coeff, is_reusable);
+	ar9003_hw_tx_iq_cal_outlier_detection(ah, &coeff, is_reusable);
 
 	return;
 
-- 
cgit v1.2.2


From adddc0d20bf4476380da94bfda8c591c49bb6cde Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Fri, 7 Feb 2014 10:29:52 +0530
Subject: ath9k: Fix magnitude/phase calculation

Incorrect values are programmed in the registers
containing the IQ correction coefficients by the IQ-CAL
post-processing code. Fix this.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ar9003_calib.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
index b3f7ea7e213a..12310e19275d 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -888,6 +888,7 @@ static void ar9003_hw_tx_iq_cal_outlier_detection(struct ath_hw *ah,
 						  bool is_reusable)
 {
 	int i, im, nmeasurement;
+	int magnitude, phase;
 	u32 tx_corr_coeff[MAX_MEASUREMENT][AR9300_MAX_CHAINS];
 	struct ath9k_hw_cal_data *caldata = ah->caldata;
 
@@ -929,9 +930,11 @@ static void ar9003_hw_tx_iq_cal_outlier_detection(struct ath_hw *ah,
 		}
 
 		for (im = 0; im < nmeasurement; im++) {
+			magnitude = coeff->mag_coeff[i][im];
+			phase = coeff->phs_coeff[i][im];
 
-			coeff->iqc_coeff[0] = (coeff->mag_coeff[i][im] & 0x7f) |
-				((coeff->phs_coeff[i][im] & 0x7f) << 7);
+			coeff->iqc_coeff[0] =
+				(phase & 0x7f) | ((magnitude & 0x7f) << 7);
 
 			if ((im % 2) == 0)
 				REG_RMW_FIELD(ah, tx_corr_coeff[im][i],
@@ -1062,8 +1065,9 @@ static void ar9003_hw_tx_iq_cal_post_proc(struct ath_hw *ah, bool is_reusable)
 				goto tx_iqcal_fail;
 			}
 
-			coeff.mag_coeff[i][im] = coeff.iqc_coeff[0] & 0x7f;
 			coeff.phs_coeff[i][im] =
+				coeff.iqc_coeff[0] & 0x7f;
+			coeff.mag_coeff[i][im] =
 				(coeff.iqc_coeff[0] >> 7) & 0x7f;
 
 			if (coeff.mag_coeff[i][im] > 63)
-- 
cgit v1.2.2


From 97fe6420c9a362ac9d0749db44b7b6629583813b Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Fri, 7 Feb 2014 10:29:53 +0530
Subject: ath9k: Modify IQ calibration for AR955x

IQ calibration post-processing for AR955x is different
from other chips - instead of just doing it as part
of AGC calibration once, it is triggered 3 times and
a median is determined. This patch adds initial support
for changing the calibration behavior for AR955x.

Also, to simplify things, a helper routine to issue/poll
AGC calibration is used.

For non-AR955x chips, the iqcal_idx (which will be used
in subsequent patches) is set to zero.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ar9003_calib.c | 81 +++++++++++++++++++--------
 1 file changed, 59 insertions(+), 22 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
index 12310e19275d..327befa06699 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -23,6 +23,7 @@
 #define MAX_MEASUREMENT	MAX_IQCAL_MEASUREMENT
 #define MAX_MAG_DELTA	11
 #define MAX_PHS_DELTA	10
+#define MAXIQCAL        3
 
 struct coeff {
 	int mag_coeff[AR9300_MAX_CHAINS][MAX_MEASUREMENT];
@@ -797,7 +798,7 @@ static bool ar9003_hw_calc_iq_corr(struct ath_hw *ah,
 	if (q_q_coff > 63)
 		q_q_coff = 63;
 
-	iqc_coeff[0] = (q_q_coff * 128) + q_i_coff;
+	iqc_coeff[0] = (q_q_coff * 128) + (0x7f & q_i_coff);
 
 	ath_dbg(common, CALIBRATE, "tx chain %d: iq corr coeff=%x\n",
 		chain_idx, iqc_coeff[0]);
@@ -828,7 +829,7 @@ static bool ar9003_hw_calc_iq_corr(struct ath_hw *ah,
 	if (q_q_coff > 63)
 		q_q_coff = 63;
 
-	iqc_coeff[1] = (q_q_coff * 128) + q_i_coff;
+	iqc_coeff[1] = (q_q_coff * 128) + (0x7f & q_i_coff);
 
 	ath_dbg(common, CALIBRATE, "rx chain %d: iq corr coeff=%x\n",
 		chain_idx, iqc_coeff[1]);
@@ -991,7 +992,9 @@ static bool ar9003_hw_tx_iq_cal_run(struct ath_hw *ah)
 	return true;
 }
 
-static void ar9003_hw_tx_iq_cal_post_proc(struct ath_hw *ah, bool is_reusable)
+static void ar9003_hw_tx_iq_cal_post_proc(struct ath_hw *ah,
+					  int iqcal_idx,
+					  bool is_reusable)
 {
 	struct ath_common *common = ath9k_hw_common(ah);
 	const u32 txiqcal_status[AR9300_MAX_CHAINS] = {
@@ -1410,7 +1413,7 @@ skip_tx_iqcal:
 	}
 
 	if (txiqcal_done)
-		ar9003_hw_tx_iq_cal_post_proc(ah, is_reusable);
+		ar9003_hw_tx_iq_cal_post_proc(ah, 0, is_reusable);
 	else if (caldata && test_bit(TXIQCAL_DONE, &caldata->cal_flags))
 		ar9003_hw_tx_iq_cal_reload(ah);
 
@@ -1456,6 +1459,29 @@ skip_tx_iqcal:
 	return true;
 }
 
+static bool do_ar9003_agc_cal(struct ath_hw *ah)
+{
+	struct ath_common *common = ath9k_hw_common(ah);
+	bool status;
+
+	REG_WRITE(ah, AR_PHY_AGC_CONTROL,
+		  REG_READ(ah, AR_PHY_AGC_CONTROL) |
+		  AR_PHY_AGC_CONTROL_CAL);
+
+	status = ath9k_hw_wait(ah, AR_PHY_AGC_CONTROL,
+			       AR_PHY_AGC_CONTROL_CAL,
+			       0, AH_WAIT_TIMEOUT);
+	if (!status) {
+		ath_dbg(common, CALIBRATE,
+			"offset calibration failed to complete in %d ms,"
+			"noisy environment?\n",
+			AH_WAIT_TIMEOUT / 1000);
+		return false;
+	}
+
+	return true;
+}
+
 static bool ar9003_hw_init_cal_soc(struct ath_hw *ah,
 				   struct ath9k_channel *chan)
 {
@@ -1464,6 +1490,7 @@ static bool ar9003_hw_init_cal_soc(struct ath_hw *ah,
 	bool txiqcal_done = false;
 	bool status = true;
 	bool run_agc_cal = false, sep_iq_cal = false;
+	int i = 0;
 
 	/* Use chip chainmask only for calibration */
 	ar9003_hw_set_chain_masks(ah, ah->caps.rx_chainmask, ah->caps.tx_chainmask);
@@ -1518,27 +1545,37 @@ skip_tx_iqcal:
 		if (AR_SREV_9330_11(ah))
 			ar9003_hw_manual_peak_cal(ah, 0, IS_CHAN_2GHZ(chan));
 
-		/* Calibrate the AGC */
-		REG_WRITE(ah, AR_PHY_AGC_CONTROL,
-			  REG_READ(ah, AR_PHY_AGC_CONTROL) |
-			  AR_PHY_AGC_CONTROL_CAL);
-
-		/* Poll for offset calibration complete */
-		status = ath9k_hw_wait(ah, AR_PHY_AGC_CONTROL,
-				       AR_PHY_AGC_CONTROL_CAL,
-				       0, AH_WAIT_TIMEOUT);
-	}
+		/*
+		 * For non-AR9550 chips, we just trigger AGC calibration
+		 * in the HW, poll for completion and then process
+		 * the results.
+		 *
+		 * For AR955x, we run it multiple times and use
+		 * median IQ correction.
+		 */
+		if (!AR_SREV_9550(ah)) {
+			status = do_ar9003_agc_cal(ah);
+			if (!status)
+				return false;
 
-	if (!status) {
-		ath_dbg(common, CALIBRATE,
-			"offset calibration failed to complete in %d ms; noisy environment?\n",
-			AH_WAIT_TIMEOUT / 1000);
-		return false;
+			if (txiqcal_done)
+				ar9003_hw_tx_iq_cal_post_proc(ah, 0, false);
+		} else {
+			if (!txiqcal_done) {
+				status = do_ar9003_agc_cal(ah);
+				if (!status)
+					return false;
+			} else {
+				for (i = 0; i < MAXIQCAL; i++) {
+					status = do_ar9003_agc_cal(ah);
+					if (!status)
+						return false;
+					ar9003_hw_tx_iq_cal_post_proc(ah, i, false);
+				}
+			}
+		}
 	}
 
-	if (txiqcal_done)
-		ar9003_hw_tx_iq_cal_post_proc(ah, false);
-
 	/* Revert chainmask to runtime parameters */
 	ar9003_hw_set_chain_masks(ah, ah->rxchainmask, ah->txchainmask);
 
-- 
cgit v1.2.2


From 4357a81d8af1fb5a6ece2fbfbd3540622fea2548 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Fri, 7 Feb 2014 10:29:54 +0530
Subject: ath9k: Expand the IQ coefficient array

This will be used for storing data for mutiple
IQ calibration runs, for AR955x.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ar9003_calib.c | 41 ++++++++++++++-------------
 1 file changed, 21 insertions(+), 20 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
index 327befa06699..6946e72d7ee9 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -26,8 +26,8 @@
 #define MAXIQCAL        3
 
 struct coeff {
-	int mag_coeff[AR9300_MAX_CHAINS][MAX_MEASUREMENT];
-	int phs_coeff[AR9300_MAX_CHAINS][MAX_MEASUREMENT];
+	int mag_coeff[AR9300_MAX_CHAINS][MAX_MEASUREMENT][MAXIQCAL];
+	int phs_coeff[AR9300_MAX_CHAINS][MAX_MEASUREMENT][MAXIQCAL];
 	int iqc_coeff[2];
 };
 
@@ -837,7 +837,8 @@ static bool ar9003_hw_calc_iq_corr(struct ath_hw *ah,
 	return true;
 }
 
-static void ar9003_hw_detect_outlier(int *mp_coeff, int nmeasurement,
+static void ar9003_hw_detect_outlier(int mp_coeff[][MAXIQCAL],
+				     int nmeasurement,
 				     int max_delta)
 {
 	int mp_max = -64, max_idx = 0;
@@ -846,20 +847,20 @@ static void ar9003_hw_detect_outlier(int *mp_coeff, int nmeasurement,
 
 	/* find min/max mismatch across all calibrated gains */
 	for (i = 0; i < nmeasurement; i++) {
-		if (mp_coeff[i] > mp_max) {
-			mp_max = mp_coeff[i];
+		if (mp_coeff[i][0] > mp_max) {
+			mp_max = mp_coeff[i][0];
 			max_idx = i;
-		} else if (mp_coeff[i] < mp_min) {
-			mp_min = mp_coeff[i];
+		} else if (mp_coeff[i][0] < mp_min) {
+			mp_min = mp_coeff[i][0];
 			min_idx = i;
 		}
 	}
 
 	/* find average (exclude max abs value) */
 	for (i = 0; i < nmeasurement; i++) {
-		if ((abs(mp_coeff[i]) < abs(mp_max)) ||
-		    (abs(mp_coeff[i]) < abs(mp_min))) {
-			mp_avg += mp_coeff[i];
+		if ((abs(mp_coeff[i][0]) < abs(mp_max)) ||
+		    (abs(mp_coeff[i][0]) < abs(mp_min))) {
+			mp_avg += mp_coeff[i][0];
 			mp_count++;
 		}
 	}
@@ -871,7 +872,7 @@ static void ar9003_hw_detect_outlier(int *mp_coeff, int nmeasurement,
 	if (mp_count)
 		mp_avg /= mp_count;
 	else
-		mp_avg = mp_coeff[nmeasurement - 1];
+		mp_avg = mp_coeff[nmeasurement - 1][0];
 
 	/* detect outlier */
 	if (abs(mp_max - mp_min) > max_delta) {
@@ -880,7 +881,7 @@ static void ar9003_hw_detect_outlier(int *mp_coeff, int nmeasurement,
 		else
 			outlier_idx = min_idx;
 
-		mp_coeff[outlier_idx] = mp_avg;
+		mp_coeff[outlier_idx][0] = mp_avg;
 	}
 }
 
@@ -931,8 +932,8 @@ static void ar9003_hw_tx_iq_cal_outlier_detection(struct ath_hw *ah,
 		}
 
 		for (im = 0; im < nmeasurement; im++) {
-			magnitude = coeff->mag_coeff[i][im];
-			phase = coeff->phs_coeff[i][im];
+			magnitude = coeff->mag_coeff[i][im][0];
+			phase = coeff->phs_coeff[i][im][0];
 
 			coeff->iqc_coeff[0] =
 				(phase & 0x7f) | ((magnitude & 0x7f) << 7);
@@ -1068,15 +1069,15 @@ static void ar9003_hw_tx_iq_cal_post_proc(struct ath_hw *ah,
 				goto tx_iqcal_fail;
 			}
 
-			coeff.phs_coeff[i][im] =
+			coeff.phs_coeff[i][im][iqcal_idx] =
 				coeff.iqc_coeff[0] & 0x7f;
-			coeff.mag_coeff[i][im] =
+			coeff.mag_coeff[i][im][iqcal_idx] =
 				(coeff.iqc_coeff[0] >> 7) & 0x7f;
 
-			if (coeff.mag_coeff[i][im] > 63)
-				coeff.mag_coeff[i][im] -= 128;
-			if (coeff.phs_coeff[i][im] > 63)
-				coeff.phs_coeff[i][im] -= 128;
+			if (coeff.mag_coeff[i][im][iqcal_idx] > 63)
+				coeff.mag_coeff[i][im][iqcal_idx] -= 128;
+			if (coeff.phs_coeff[i][im][iqcal_idx] > 63)
+				coeff.phs_coeff[i][im][iqcal_idx] -= 128;
 		}
 	}
 	ar9003_hw_tx_iq_cal_outlier_detection(ah, &coeff, is_reusable);
-- 
cgit v1.2.2


From e3d7556b7743b56e14362e43de84f30174138c73 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Fri, 7 Feb 2014 10:29:55 +0530
Subject: ath9k: Calculate IQ-CAL median

This patch adds a routine to calculate the median IQ correction
values for AR955x, which is used for outlier detection.
The normal method which is used for all other chips is
bypassed for AR955x.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ar9003_calib.c | 91 +++++++++++++++++++++++----
 1 file changed, 79 insertions(+), 12 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
index 6946e72d7ee9..ac8301ef5242 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -920,15 +920,22 @@ static void ar9003_hw_tx_iq_cal_outlier_detection(struct ath_hw *ah,
 		if (nmeasurement > MAX_MEASUREMENT)
 			nmeasurement = MAX_MEASUREMENT;
 
-		/* detect outlier only if nmeasurement > 1 */
-		if (nmeasurement > 1) {
-			/* Detect magnitude outlier */
-			ar9003_hw_detect_outlier(coeff->mag_coeff[i],
-					nmeasurement, MAX_MAG_DELTA);
-
-			/* Detect phase outlier */
-			ar9003_hw_detect_outlier(coeff->phs_coeff[i],
-					nmeasurement, MAX_PHS_DELTA);
+		/*
+		 * Skip normal outlier detection for AR9550.
+		 */
+		if (!AR_SREV_9550(ah)) {
+			/* detect outlier only if nmeasurement > 1 */
+			if (nmeasurement > 1) {
+				/* Detect magnitude outlier */
+				ar9003_hw_detect_outlier(coeff->mag_coeff[i],
+							 nmeasurement,
+							 MAX_MAG_DELTA);
+
+				/* Detect phase outlier */
+				ar9003_hw_detect_outlier(coeff->phs_coeff[i],
+							 nmeasurement,
+							 MAX_PHS_DELTA);
+			}
 		}
 
 		for (im = 0; im < nmeasurement; im++) {
@@ -993,6 +1000,60 @@ static bool ar9003_hw_tx_iq_cal_run(struct ath_hw *ah)
 	return true;
 }
 
+static void __ar955x_tx_iq_cal_sort(struct ath_hw *ah,
+				    struct coeff *coeff,
+				    int i, int nmeasurement)
+{
+	struct ath_common *common = ath9k_hw_common(ah);
+	int im, ix, iy, temp;
+
+	for (im = 0; im < nmeasurement; im++) {
+		for (ix = 0; ix < MAXIQCAL - 1; ix++) {
+			for (iy = ix + 1; iy <= MAXIQCAL - 1; iy++) {
+				if (coeff->mag_coeff[i][im][iy] <
+				    coeff->mag_coeff[i][im][ix]) {
+					temp = coeff->mag_coeff[i][im][ix];
+					coeff->mag_coeff[i][im][ix] =
+						coeff->mag_coeff[i][im][iy];
+					coeff->mag_coeff[i][im][iy] = temp;
+				}
+				if (coeff->phs_coeff[i][im][iy] <
+				    coeff->phs_coeff[i][im][ix]) {
+					temp = coeff->phs_coeff[i][im][ix];
+					coeff->phs_coeff[i][im][ix] =
+						coeff->phs_coeff[i][im][iy];
+					coeff->phs_coeff[i][im][iy] = temp;
+				}
+			}
+		}
+		coeff->mag_coeff[i][im][0] = coeff->mag_coeff[i][im][MAXIQCAL / 2];
+		coeff->phs_coeff[i][im][0] = coeff->phs_coeff[i][im][MAXIQCAL / 2];
+
+		ath_dbg(common, CALIBRATE,
+			"IQCAL: Median [ch%d][gain%d]: mag = %d phase = %d\n",
+			i, im,
+			coeff->mag_coeff[i][im][0],
+			coeff->phs_coeff[i][im][0]);
+	}
+}
+
+static bool ar955x_tx_iq_cal_median(struct ath_hw *ah,
+				    struct coeff *coeff,
+				    int iqcal_idx,
+				    int nmeasurement)
+{
+	int i;
+
+	if ((iqcal_idx + 1) != MAXIQCAL)
+		return false;
+
+	for (i = 0; i < AR9300_MAX_CHAINS; i++) {
+		__ar955x_tx_iq_cal_sort(ah, coeff, i, nmeasurement);
+	}
+
+	return true;
+}
+
 static void ar9003_hw_tx_iq_cal_post_proc(struct ath_hw *ah,
 					  int iqcal_idx,
 					  bool is_reusable)
@@ -1008,10 +1069,11 @@ static void ar9003_hw_tx_iq_cal_post_proc(struct ath_hw *ah,
 		AR_PHY_CHAN_INFO_TAB_1,
 		AR_PHY_CHAN_INFO_TAB_2,
 	};
-	struct coeff coeff;
+	static struct coeff coeff;
 	s32 iq_res[6];
 	int i, im, j;
-	int nmeasurement;
+	int nmeasurement = 0;
+	bool outlier_detect = true;
 
 	for (i = 0; i < AR9300_MAX_CHAINS; i++) {
 		if (!(ah->txchainmask & (1 << i)))
@@ -1080,7 +1142,12 @@ static void ar9003_hw_tx_iq_cal_post_proc(struct ath_hw *ah,
 				coeff.phs_coeff[i][im][iqcal_idx] -= 128;
 		}
 	}
-	ar9003_hw_tx_iq_cal_outlier_detection(ah, &coeff, is_reusable);
+
+	if (AR_SREV_9550(ah))
+		outlier_detect = ar955x_tx_iq_cal_median(ah, &coeff,
+							 iqcal_idx, nmeasurement);
+	if (outlier_detect)
+		ar9003_hw_tx_iq_cal_outlier_detection(ah, &coeff, is_reusable);
 
 	return;
 
-- 
cgit v1.2.2


From 7abf4129e6dfe231e81a07af5bde0488bba6f95b Mon Sep 17 00:00:00 2001
From: Bing Zhao <bzhao@marvell.com>
Date: Fri, 7 Feb 2014 16:20:58 -0800
Subject: mwifiex: make use of IEEE80211_VHT_MCS_NOT_SUPPORTED

Remove driver's macro and use ieee80211's definition instead

Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/11ac.c | 14 ++++++++------
 drivers/net/wireless/mwifiex/fw.h   |  2 --
 2 files changed, 8 insertions(+), 8 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/11ac.c b/drivers/net/wireless/mwifiex/11ac.c
index 5e0eec4d71c7..cc0458c87755 100644
--- a/drivers/net/wireless/mwifiex/11ac.c
+++ b/drivers/net/wireless/mwifiex/11ac.c
@@ -126,9 +126,10 @@ mwifiex_fill_vht_cap_tlv(struct mwifiex_private *priv,
 		mcs_user = GET_VHTNSSMCS(mcs_map_user, nss);
 		mcs_resp = GET_VHTNSSMCS(mcs_map_resp, nss);
 
-		if ((mcs_user == NO_NSS_SUPPORT) ||
-		    (mcs_resp == NO_NSS_SUPPORT))
-			SET_VHTNSSMCS(mcs_map_result, nss, NO_NSS_SUPPORT);
+		if ((mcs_user == IEEE80211_VHT_MCS_NOT_SUPPORTED) ||
+		    (mcs_resp == IEEE80211_VHT_MCS_NOT_SUPPORTED))
+			SET_VHTNSSMCS(mcs_map_result, nss,
+				      IEEE80211_VHT_MCS_NOT_SUPPORTED);
 		else
 			SET_VHTNSSMCS(mcs_map_result, nss,
 				      min(mcs_user, mcs_resp));
@@ -147,9 +148,10 @@ mwifiex_fill_vht_cap_tlv(struct mwifiex_private *priv,
 	for (nss = 1; nss <= 8; nss++) {
 		mcs_user = GET_VHTNSSMCS(mcs_map_user, nss);
 		mcs_resp = GET_VHTNSSMCS(mcs_map_resp, nss);
-		if ((mcs_user == NO_NSS_SUPPORT) ||
-		    (mcs_resp == NO_NSS_SUPPORT))
-			SET_VHTNSSMCS(mcs_map_result, nss, NO_NSS_SUPPORT);
+		if ((mcs_user == IEEE80211_VHT_MCS_NOT_SUPPORTED) ||
+		    (mcs_resp == IEEE80211_VHT_MCS_NOT_SUPPORTED))
+			SET_VHTNSSMCS(mcs_map_result, nss,
+				      IEEE80211_VHT_MCS_NOT_SUPPORTED);
 		else
 			SET_VHTNSSMCS(mcs_map_result, nss,
 				      min(mcs_user, mcs_resp));
diff --git a/drivers/net/wireless/mwifiex/fw.h b/drivers/net/wireless/mwifiex/fw.h
index 5fa932d5f905..059bc16adf81 100644
--- a/drivers/net/wireless/mwifiex/fw.h
+++ b/drivers/net/wireless/mwifiex/fw.h
@@ -232,8 +232,6 @@ enum MWIFIEX_802_11_PRIVACY_FILTER {
 #define GET_VHTNSSMCS(mcs_mapset, nss) ((mcs_mapset >> (2 * (nss - 1))) & 0x3)
 #define SET_VHTNSSMCS(mcs_mapset, nss, value) (mcs_mapset |= (value & 0x3) << \
 					      (2 * (nss - 1)))
-#define NO_NSS_SUPPORT		0x3
-
 #define GET_DEVTXMCSMAP(dev_mcs_map)      (dev_mcs_map >> 16)
 #define GET_DEVRXMCSMAP(dev_mcs_map)      (dev_mcs_map & 0xFFFF)
 
-- 
cgit v1.2.2


From 89467d8ca21b4c62ab1acbadd09e725d2cd410be Mon Sep 17 00:00:00 2001
From: Bing Zhao <bzhao@marvell.com>
Date: Fri, 7 Feb 2014 16:20:59 -0800
Subject: mwifiex: make 11ac mcs rate tables global and const

Remove these local array variables and define them as static
const array in global space.
The duplicated mcs_rate table is removed automatically with this
change.

Reported-by: Paul Stewart <pstew@chromium.org>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/11ac.c |  48 ++++-----
 drivers/net/wireless/mwifiex/cfp.c  | 198 ++++++++++++++++--------------------
 2 files changed, 114 insertions(+), 132 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/11ac.c b/drivers/net/wireless/mwifiex/11ac.c
index cc0458c87755..f07a5005455d 100644
--- a/drivers/net/wireless/mwifiex/11ac.c
+++ b/drivers/net/wireless/mwifiex/11ac.c
@@ -23,6 +23,31 @@
 #include "main.h"
 #include "11ac.h"
 
+/* Tables of the MCS map to the highest data rate (in Mbps) supported
+ * for long GI.
+ */
+static const u16 max_rate_lgi_80MHZ[8][3] = {
+	{0x124, 0x15F, 0x186},	/* NSS = 1 */
+	{0x249, 0x2BE, 0x30C},  /* NSS = 2 */
+	{0x36D, 0x41D, 0x492},  /* NSS = 3 */
+	{0x492, 0x57C, 0x618},  /* NSS = 4 */
+	{0x5B6, 0x6DB, 0x79E},  /* NSS = 5 */
+	{0x6DB, 0x83A, 0x0},    /* NSS = 6 */
+	{0x7FF, 0x999, 0xAAA},  /* NSS = 7 */
+	{0x924, 0xAF8, 0xC30}   /* NSS = 8 */
+};
+
+static const u16 max_rate_lgi_160MHZ[8][3] = {
+	{0x249, 0x2BE, 0x30C},   /* NSS = 1 */
+	{0x492, 0x57C, 0x618},   /* NSS = 2 */
+	{0x6DB, 0x83A, 0x0},     /* NSS = 3 */
+	{0x924, 0xAF8, 0xC30},   /* NSS = 4 */
+	{0xB6D, 0xDB6, 0xF3C},   /* NSS = 5 */
+	{0xDB6, 0x1074, 0x1248}, /* NSS = 6 */
+	{0xFFF, 0x1332, 0x1554}, /* NSS = 7 */
+	{0x1248, 0x15F0, 0x1860} /* NSS = 8 */
+};
+
 /* This function converts the 2-bit MCS map to the highest long GI
  * VHT data rate.
  */
@@ -34,29 +59,6 @@ mwifiex_convert_mcsmap_to_maxrate(struct mwifiex_private *priv,
 	u16 max_rate = 0;
 	u32 usr_vht_cap_info = 0;
 	struct mwifiex_adapter *adapter = priv->adapter;
-	/* tables of the MCS map to the highest data rate (in Mbps)
-	 * supported for long GI
-	 */
-	u16 max_rate_lgi_80MHZ[8][3] = {
-		{0x124, 0x15F, 0x186},	/* NSS = 1 */
-		{0x249, 0x2BE, 0x30C},  /* NSS = 2 */
-		{0x36D, 0x41D, 0x492},  /* NSS = 3 */
-		{0x492, 0x57C, 0x618},  /* NSS = 4 */
-		{0x5B6, 0x6DB, 0x79E},  /* NSS = 5 */
-		{0x6DB, 0x83A, 0x0},    /* NSS = 6 */
-		{0x7FF, 0x999, 0xAAA},  /* NSS = 7 */
-		{0x924, 0xAF8, 0xC30}   /* NSS = 8 */
-	};
-	u16 max_rate_lgi_160MHZ[8][3] = {
-		{0x249, 0x2BE, 0x30C},   /* NSS = 1 */
-		{0x492, 0x57C, 0x618},   /* NSS = 2 */
-		{0x6DB, 0x83A, 0x0},     /* NSS = 3 */
-		{0x924, 0xAF8, 0xC30},   /* NSS = 4 */
-		{0xB6D, 0xDB6, 0xF3C},   /* NSS = 5 */
-		{0xDB6, 0x1074, 0x1248}, /* NSS = 6 */
-		{0xFFF, 0x1332, 0x1554}, /* NSS = 7 */
-		{0x1248, 0x15F0, 0x1860} /* NSS = 8 */
-	};
 
 	if (bands & BAND_AAC)
 		usr_vht_cap_info = adapter->usr_dot_11ac_dev_cap_a;
diff --git a/drivers/net/wireless/mwifiex/cfp.c b/drivers/net/wireless/mwifiex/cfp.c
index 9eefacbc844b..dfb068ba2dbd 100644
--- a/drivers/net/wireless/mwifiex/cfp.c
+++ b/drivers/net/wireless/mwifiex/cfp.c
@@ -71,6 +71,95 @@ u16 region_code_index[MWIFIEX_MAX_REGION_CODE] = { 0x10, 0x20, 0x30,
 
 static u8 supported_rates_n[N_SUPPORTED_RATES] = { 0x02, 0x04, 0 };
 
+/* For every mcs_rate line, the first 8 bytes are for stream 1x1,
+ * and all 16 bytes are for stream 2x2.
+ */
+static const u16 mcs_rate[4][16] = {
+	/* LGI 40M */
+	{ 0x1b, 0x36, 0x51, 0x6c, 0xa2, 0xd8, 0xf3, 0x10e,
+	  0x36, 0x6c, 0xa2, 0xd8, 0x144, 0x1b0, 0x1e6, 0x21c },
+
+	/* SGI 40M */
+	{ 0x1e, 0x3c, 0x5a, 0x78, 0xb4, 0xf0, 0x10e, 0x12c,
+	  0x3c, 0x78, 0xb4, 0xf0, 0x168, 0x1e0, 0x21c, 0x258 },
+
+	/* LGI 20M */
+	{ 0x0d, 0x1a, 0x27, 0x34, 0x4e, 0x68, 0x75, 0x82,
+	  0x1a, 0x34, 0x4e, 0x68, 0x9c, 0xd0, 0xea, 0x104 },
+
+	/* SGI 20M */
+	{ 0x0e, 0x1c, 0x2b, 0x39, 0x56, 0x73, 0x82, 0x90,
+	  0x1c, 0x39, 0x56, 0x73, 0xad, 0xe7, 0x104, 0x120 }
+};
+
+/* AC rates */
+static const u16 ac_mcs_rate_nss1[8][10] = {
+	/* LG 160M */
+	{ 0x75, 0xEA, 0x15F, 0x1D4, 0x2BE, 0x3A8, 0x41D,
+	  0x492, 0x57C, 0x618 },
+
+	/* SG 160M */
+	{ 0x82, 0x104, 0x186, 0x208, 0x30C, 0x410, 0x492,
+	  0x514, 0x618, 0x6C6 },
+
+	/* LG 80M */
+	{ 0x3B, 0x75, 0xB0, 0xEA, 0x15F, 0x1D4, 0x20F,
+	  0x249, 0x2BE, 0x30C },
+
+	/* SG 80M */
+	{ 0x41, 0x82, 0xC3, 0x104, 0x186, 0x208, 0x249,
+	  0x28A, 0x30C, 0x363 },
+
+	/* LG 40M */
+	{ 0x1B, 0x36, 0x51, 0x6C, 0xA2, 0xD8, 0xF3,
+	  0x10E, 0x144, 0x168 },
+
+	/* SG 40M */
+	{ 0x1E, 0x3C, 0x5A, 0x78, 0xB4, 0xF0, 0x10E,
+	  0x12C, 0x168, 0x190 },
+
+	/* LG 20M */
+	{ 0xD, 0x1A, 0x27, 0x34, 0x4E, 0x68, 0x75, 0x82, 0x9C, 0x00 },
+
+	/* SG 20M */
+	{ 0xF, 0x1D, 0x2C, 0x3A, 0x57, 0x74, 0x82, 0x91, 0xAE, 0x00 },
+};
+
+/* NSS2 note: the value in the table is 2 multiplier of the actual rate */
+static const u16 ac_mcs_rate_nss2[8][10] = {
+	/* LG 160M */
+	{ 0xEA, 0x1D4, 0x2BE, 0x3A8, 0x57C, 0x750, 0x83A,
+	  0x924, 0xAF8, 0xC30 },
+
+	/* SG 160M */
+	{ 0x104, 0x208, 0x30C, 0x410, 0x618, 0x820, 0x924,
+	  0xA28, 0xC30, 0xD8B },
+
+	/* LG 80M */
+	{ 0x75, 0xEA, 0x15F, 0x1D4, 0x2BE, 0x3A8, 0x41D,
+	  0x492, 0x57C, 0x618 },
+
+	/* SG 80M */
+	{ 0x82, 0x104, 0x186, 0x208, 0x30C, 0x410, 0x492,
+	  0x514, 0x618, 0x6C6 },
+
+	/* LG 40M */
+	{ 0x36, 0x6C, 0xA2, 0xD8, 0x144, 0x1B0, 0x1E6,
+	  0x21C, 0x288, 0x2D0 },
+
+	/* SG 40M */
+	{ 0x3C, 0x78, 0xB4, 0xF0, 0x168, 0x1E0, 0x21C,
+	  0x258, 0x2D0, 0x320 },
+
+	/* LG 20M */
+	{ 0x1A, 0x34, 0x4A, 0x68, 0x9C, 0xD0, 0xEA, 0x104,
+	  0x138, 0x00 },
+
+	/* SG 20M */
+	{ 0x1D, 0x3A, 0x57, 0x74, 0xAE, 0xE6, 0x104, 0x121,
+	  0x15B, 0x00 },
+};
+
 struct region_code_mapping {
 	u8 code;
 	u8 region[IEEE80211_COUNTRY_STRING_LEN];
@@ -109,95 +198,6 @@ u8 *mwifiex_11d_code_2_region(u8 code)
 u32 mwifiex_index_to_acs_data_rate(struct mwifiex_private *priv,
 				   u8 index, u8 ht_info)
 {
-	/*
-	 * For every mcs_rate line, the first 8 bytes are for stream 1x1,
-	 * and all 16 bytes are for stream 2x2.
-	 */
-	u16  mcs_rate[4][16] = {
-		/* LGI 40M */
-		{ 0x1b, 0x36, 0x51, 0x6c, 0xa2, 0xd8, 0xf3, 0x10e,
-		  0x36, 0x6c, 0xa2, 0xd8, 0x144, 0x1b0, 0x1e6, 0x21c },
-
-		/* SGI 40M */
-		{ 0x1e, 0x3c, 0x5a, 0x78, 0xb4, 0xf0, 0x10e, 0x12c,
-		  0x3c, 0x78, 0xb4, 0xf0, 0x168, 0x1e0, 0x21c, 0x258 },
-
-		/* LGI 20M */
-		{ 0x0d, 0x1a, 0x27, 0x34, 0x4e, 0x68, 0x75, 0x82,
-		  0x1a, 0x34, 0x4e, 0x68, 0x9c, 0xd0, 0xea, 0x104 },
-
-		/* SGI 20M */
-		{ 0x0e, 0x1c, 0x2b, 0x39, 0x56, 0x73, 0x82, 0x90,
-		  0x1c, 0x39, 0x56, 0x73, 0xad, 0xe7, 0x104, 0x120 }
-	};
-	/* AC rates */
-	u16 ac_mcs_rate_nss1[8][10] = {
-		/* LG 160M */
-		{ 0x75, 0xEA, 0x15F, 0x1D4, 0x2BE, 0x3A8, 0x41D,
-		  0x492, 0x57C, 0x618 },
-
-		/* SG 160M */
-		{ 0x82, 0x104, 0x186, 0x208, 0x30C, 0x410, 0x492,
-		  0x514, 0x618, 0x6C6 },
-
-		/* LG 80M */
-		{ 0x3B, 0x75, 0xB0, 0xEA, 0x15F, 0x1D4, 0x20F,
-		  0x249, 0x2BE, 0x30C },
-
-		/* SG 80M */
-		{ 0x41, 0x82, 0xC3, 0x104, 0x186, 0x208, 0x249,
-		  0x28A, 0x30C, 0x363 },
-
-		/* LG 40M */
-		{ 0x1B, 0x36, 0x51, 0x6C, 0xA2, 0xD8, 0xF3,
-		  0x10E, 0x144, 0x168 },
-
-		/* SG 40M */
-		{ 0x1E, 0x3C, 0x5A, 0x78, 0xB4, 0xF0, 0x10E,
-		  0x12C, 0x168, 0x190 },
-
-		/* LG 20M */
-		{ 0xD, 0x1A, 0x27, 0x34, 0x4E, 0x68, 0x75, 0x82, 0x9C, 0x00 },
-
-		/* SG 20M */
-		{ 0xF, 0x1D, 0x2C, 0x3A, 0x57, 0x74, 0x82, 0x91, 0xAE, 0x00 },
-	};
-	/* NSS2 note: the value in the table is 2 multiplier of the actual
-	 * rate
-	 */
-	u16 ac_mcs_rate_nss2[8][10] = {
-		/* LG 160M */
-		{ 0xEA, 0x1D4, 0x2BE, 0x3A8, 0x57C, 0x750, 0x83A,
-		  0x924, 0xAF8, 0xC30 },
-
-		/* SG 160M */
-		{ 0x104, 0x208, 0x30C, 0x410, 0x618, 0x820, 0x924,
-		  0xA28, 0xC30, 0xD8B },
-
-		/* LG 80M */
-		{ 0x75, 0xEA, 0x15F, 0x1D4, 0x2BE, 0x3A8, 0x41D,
-		  0x492, 0x57C, 0x618 },
-
-		/* SG 80M */
-		{ 0x82, 0x104, 0x186, 0x208, 0x30C, 0x410, 0x492,
-		  0x514, 0x618, 0x6C6 },
-
-		/* LG 40M */
-		{ 0x36, 0x6C, 0xA2, 0xD8, 0x144, 0x1B0, 0x1E6,
-		  0x21C, 0x288, 0x2D0 },
-
-		/* SG 40M */
-		{ 0x3C, 0x78, 0xB4, 0xF0, 0x168, 0x1E0, 0x21C,
-		  0x258, 0x2D0, 0x320 },
-
-		/* LG 20M */
-		{ 0x1A, 0x34, 0x4A, 0x68, 0x9C, 0xD0, 0xEA, 0x104,
-		  0x138, 0x00 },
-
-		/* SG 20M */
-		{ 0x1D, 0x3A, 0x57, 0x74, 0xAE, 0xE6, 0x104, 0x121,
-		  0x15B, 0x00 },
-	};
 	u32 rate = 0;
 	u8 mcs_index = 0;
 	u8 bw = 0;
@@ -252,26 +252,6 @@ u32 mwifiex_index_to_acs_data_rate(struct mwifiex_private *priv,
 u32 mwifiex_index_to_data_rate(struct mwifiex_private *priv,
 			       u8 index, u8 ht_info)
 {
-	/* For every mcs_rate line, the first 8 bytes are for stream 1x1,
-	 * and all 16 bytes are for stream 2x2.
-	 */
-	u16  mcs_rate[4][16] = {
-		/* LGI 40M */
-		{ 0x1b, 0x36, 0x51, 0x6c, 0xa2, 0xd8, 0xf3, 0x10e,
-		  0x36, 0x6c, 0xa2, 0xd8, 0x144, 0x1b0, 0x1e6, 0x21c },
-
-		/* SGI 40M */
-		{ 0x1e, 0x3c, 0x5a, 0x78, 0xb4, 0xf0, 0x10e, 0x12c,
-		  0x3c, 0x78, 0xb4, 0xf0, 0x168, 0x1e0, 0x21c, 0x258 },
-
-		/* LGI 20M */
-		{ 0x0d, 0x1a, 0x27, 0x34, 0x4e, 0x68, 0x75, 0x82,
-		  0x1a, 0x34, 0x4e, 0x68, 0x9c, 0xd0, 0xea, 0x104 },
-
-		/* SGI 20M */
-		{ 0x0e, 0x1c, 0x2b, 0x39, 0x56, 0x73, 0x82, 0x90,
-		  0x1c, 0x39, 0x56, 0x73, 0xad, 0xe7, 0x104, 0x120 }
-	};
 	u32 mcs_num_supp =
 		(priv->adapter->hw_dev_mcs_support == HT_STREAM_2X2) ? 16 : 8;
 	u32 rate;
-- 
cgit v1.2.2


From 406d702b47a23506b944d8377647352e25f68ea1 Mon Sep 17 00:00:00 2001
From: Bing Zhao <bzhao@marvell.com>
Date: Fri, 7 Feb 2014 16:21:00 -0800
Subject: mwifiex: improve readability in 11ac mcsmap to maxrate conversion

1) rename max_mcs to mcs;
2) initialize 'i' and 'nss' as 1 instead of 0 in nss lookup;
3) use GET_VHTNSSMCS(mcs_map, nss) macro;
4) use IEEE80211_VHT_MCS_* definitions instead of hard coding

Reported-by: Paul Stewart <pstew@chromium.org>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/11ac.c | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/11ac.c b/drivers/net/wireless/mwifiex/11ac.c
index f07a5005455d..47383920eb12 100644
--- a/drivers/net/wireless/mwifiex/11ac.c
+++ b/drivers/net/wireless/mwifiex/11ac.c
@@ -55,7 +55,7 @@ static u16
 mwifiex_convert_mcsmap_to_maxrate(struct mwifiex_private *priv,
 				  u8 bands, u16 mcs_map)
 {
-	u8 i, nss, max_mcs;
+	u8 i, nss, mcs;
 	u16 max_rate = 0;
 	u32 usr_vht_cap_info = 0;
 	struct mwifiex_adapter *adapter = priv->adapter;
@@ -66,29 +66,29 @@ mwifiex_convert_mcsmap_to_maxrate(struct mwifiex_private *priv,
 		usr_vht_cap_info = adapter->usr_dot_11ac_dev_cap_bg;
 
 	/* find the max NSS supported */
-	nss = 0;
-	for (i = 0; i < 8; i++) {
-		max_mcs = (mcs_map >> (2 * i)) & 0x3;
-		if (max_mcs < 3)
+	nss = 1;
+	for (i = 1; i <= 8; i++) {
+		mcs = GET_VHTNSSMCS(mcs_map, i);
+		if (mcs < IEEE80211_VHT_MCS_NOT_SUPPORTED)
 			nss = i;
 	}
-	max_mcs = (mcs_map >> (2 * nss)) & 0x3;
+	mcs = GET_VHTNSSMCS(mcs_map, nss);
 
-	/* if max_mcs is 3, nss must be 0 (SS = 1). Thus, max mcs is MCS 9 */
-	if (max_mcs >= 3)
-		max_mcs = 2;
+	/* if mcs is 3, nss must be 1 (NSS = 1). Default mcs to MCS 0~9 */
+	if (mcs == IEEE80211_VHT_MCS_NOT_SUPPORTED)
+		mcs = IEEE80211_VHT_MCS_SUPPORT_0_9;
 
 	if (GET_VHTCAP_CHWDSET(usr_vht_cap_info)) {
 		/* support 160 MHz */
-		max_rate = max_rate_lgi_160MHZ[nss][max_mcs];
+		max_rate = max_rate_lgi_160MHZ[nss - 1][mcs];
 		if (!max_rate)
 			/* MCS9 is not supported in NSS6 */
-			max_rate = max_rate_lgi_160MHZ[nss][max_mcs - 1];
+			max_rate = max_rate_lgi_160MHZ[nss - 1][mcs - 1];
 	} else {
-		max_rate = max_rate_lgi_80MHZ[nss][max_mcs];
+		max_rate = max_rate_lgi_80MHZ[nss - 1][mcs];
 		if (!max_rate)
 			/* MCS9 is not supported in NSS3 */
-			max_rate = max_rate_lgi_80MHZ[nss][max_mcs - 1];
+			max_rate = max_rate_lgi_80MHZ[nss - 1][mcs - 1];
 	}
 
 	return max_rate;
-- 
cgit v1.2.2


From f25b14315e8084efbcc5c672cec8ee1f691dc2fd Mon Sep 17 00:00:00 2001
From: Bing Zhao <bzhao@marvell.com>
Date: Fri, 7 Feb 2014 16:21:01 -0800
Subject: mwifiex: remove unsupported code in 11ac

bit12 in fw_cap_info is for testing only.
Remove all related code.

Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/cfg80211.c  |  3 ---
 drivers/net/wireless/mwifiex/cfp.c       |  5 -----
 drivers/net/wireless/mwifiex/fw.h        | 20 +++++++++++---------
 drivers/net/wireless/mwifiex/ioctl.h     |  3 +--
 drivers/net/wireless/mwifiex/join.c      | 12 ++++--------
 drivers/net/wireless/mwifiex/sta_ioctl.c |  2 +-
 6 files changed, 17 insertions(+), 28 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index 0948ebe8942e..c6606288c61e 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -1416,9 +1416,6 @@ static int mwifiex_cfg80211_start_ap(struct wiphy *wiphy,
 
 		if (params->chandef.width > NL80211_CHAN_WIDTH_20_NOHT)
 			config_bands |= BAND_GN;
-
-		if (params->chandef.width > NL80211_CHAN_WIDTH_40)
-			config_bands |= BAND_GAC;
 	} else {
 		bss_cfg->band_cfg = BAND_CONFIG_A;
 		config_bands = BAND_A;
diff --git a/drivers/net/wireless/mwifiex/cfp.c b/drivers/net/wireless/mwifiex/cfp.c
index dfb068ba2dbd..2c3226bf86f8 100644
--- a/drivers/net/wireless/mwifiex/cfp.c
+++ b/drivers/net/wireless/mwifiex/cfp.c
@@ -438,7 +438,6 @@ u32 mwifiex_get_supported_rates(struct mwifiex_private *priv, u8 *rates)
 			break;
 		case BAND_G:
 		case BAND_G | BAND_GN:
-		case BAND_G | BAND_GN | BAND_GAC:
 			dev_dbg(adapter->dev, "info: infra band=%d "
 				"supported_rates_g\n", adapter->config_bands);
 			k = mwifiex_copy_rates(rates, k, supported_rates_g,
@@ -449,10 +448,7 @@ u32 mwifiex_get_supported_rates(struct mwifiex_private *priv, u8 *rates)
 		case BAND_A | BAND_B:
 		case BAND_A | BAND_B | BAND_G | BAND_GN | BAND_AN:
 		case BAND_A | BAND_B | BAND_G | BAND_GN | BAND_AN | BAND_AAC:
-		case BAND_A | BAND_B | BAND_G | BAND_GN | BAND_AN |
-		     BAND_AAC | BAND_GAC:
 		case BAND_B | BAND_G | BAND_GN:
-		case BAND_B | BAND_G | BAND_GN | BAND_GAC:
 			dev_dbg(adapter->dev, "info: infra band=%d "
 				"supported_rates_bg\n", adapter->config_bands);
 			k = mwifiex_copy_rates(rates, k, supported_rates_bg,
@@ -476,7 +472,6 @@ u32 mwifiex_get_supported_rates(struct mwifiex_private *priv, u8 *rates)
 					       sizeof(supported_rates_a));
 			break;
 		case BAND_GN:
-		case BAND_GN | BAND_GAC:
 			dev_dbg(adapter->dev, "info: infra band=%d "
 				"supported_rates_n\n", adapter->config_bands);
 			k = mwifiex_copy_rates(rates, k, supported_rates_n,
diff --git a/drivers/net/wireless/mwifiex/fw.h b/drivers/net/wireless/mwifiex/fw.h
index 059bc16adf81..d8014c87d470 100644
--- a/drivers/net/wireless/mwifiex/fw.h
+++ b/drivers/net/wireless/mwifiex/fw.h
@@ -50,21 +50,23 @@ struct tx_packet_hdr {
 #define HOSTCMD_SUPPORTED_RATES         14
 #define N_SUPPORTED_RATES               3
 #define ALL_802_11_BANDS           (BAND_A | BAND_B | BAND_G | BAND_GN | \
-				    BAND_AN | BAND_GAC | BAND_AAC)
+				    BAND_AN | BAND_AAC)
 
 #define FW_MULTI_BANDS_SUPPORT  (BIT(8) | BIT(9) | BIT(10) | BIT(11) | \
-				 BIT(12) | BIT(13))
+				 BIT(13))
 #define IS_SUPPORT_MULTI_BANDS(adapter)        \
 	(adapter->fw_cap_info & FW_MULTI_BANDS_SUPPORT)
 
-/* shift bit 12 and bit 13 in fw_cap_info from the firmware to bit 13 and 14
- * for 11ac so that bit 11 is for GN, bit 12 for AN, bit 13 for GAC, and bit
- * bit 14 for AAC, in order to be compatible with the band capability
- * defined in the driver after right shift of 8 bits.
+/* bit 13: 11ac BAND_AAC
+ * bit 12: reserved for lab testing, will be reused for BAND_AN
+ * bit 11: 11n  BAND_GN
+ * bit 10: 11a  BAND_A
+ * bit 9: 11g   BAND_G
+ * bit 8: 11b   BAND_B
+ * Map these bits to band capability by right shifting 8 bits.
  */
 #define GET_FW_DEFAULT_BANDS(adapter)  \
-	    (((((adapter->fw_cap_info & 0x3000) << 1) | \
-	       (adapter->fw_cap_info & ~0xF000)) >> 8) & \
+	    (((adapter->fw_cap_info & 0x2f00) >> 8) & \
 	     ALL_802_11_BANDS)
 
 #define HostCmd_WEP_KEY_INDEX_MASK              0x3fff
@@ -226,7 +228,7 @@ enum MWIFIEX_802_11_PRIVACY_FILTER {
 
 /* HW_SPEC fw_cap_info */
 
-#define ISSUPP_11ACENABLED(fw_cap_info) (fw_cap_info & (BIT(12)|BIT(13)))
+#define ISSUPP_11ACENABLED(fw_cap_info) (fw_cap_info & BIT(13))
 
 #define GET_VHTCAP_CHWDSET(vht_cap_info)    ((vht_cap_info >> 2) & 0x3)
 #define GET_VHTNSSMCS(mcs_mapset, nss) ((mcs_mapset >> (2 * (nss - 1))) & 0x3)
diff --git a/drivers/net/wireless/mwifiex/ioctl.h b/drivers/net/wireless/mwifiex/ioctl.h
index 00a95f4c6a6c..48f15906515d 100644
--- a/drivers/net/wireless/mwifiex/ioctl.h
+++ b/drivers/net/wireless/mwifiex/ioctl.h
@@ -60,8 +60,7 @@ enum {
 	BAND_A = 4,
 	BAND_GN = 8,
 	BAND_AN = 16,
-	BAND_GAC = 32,
-	BAND_AAC = 64,
+	BAND_AAC = 32,
 };
 
 #define MWIFIEX_WPA_PASSHPHRASE_LEN 64
diff --git a/drivers/net/wireless/mwifiex/join.c b/drivers/net/wireless/mwifiex/join.c
index 4e4686e6ac09..d3934c6dbd8a 100644
--- a/drivers/net/wireless/mwifiex/join.c
+++ b/drivers/net/wireless/mwifiex/join.c
@@ -515,8 +515,7 @@ int mwifiex_cmd_802_11_associate(struct mwifiex_private *priv,
 
 	if (ISSUPP_11ACENABLED(priv->adapter->fw_cap_info) &&
 	    !bss_desc->disable_11n && !bss_desc->disable_11ac &&
-	    (priv->adapter->config_bands & BAND_GAC ||
-	     priv->adapter->config_bands & BAND_AAC))
+	    priv->adapter->config_bands & BAND_AAC)
 		mwifiex_cmd_append_11ac_tlv(priv, bss_desc, &pos);
 
 	/* Append vendor specific IE TLV */
@@ -1300,8 +1299,7 @@ int mwifiex_associate(struct mwifiex_private *priv,
 
 	if (ISSUPP_11ACENABLED(priv->adapter->fw_cap_info) &&
 	    !bss_desc->disable_11n && !bss_desc->disable_11ac &&
-	    (priv->adapter->config_bands & BAND_GAC ||
-	     priv->adapter->config_bands & BAND_AAC))
+	    priv->adapter->config_bands & BAND_AAC)
 		mwifiex_set_11ac_ba_params(priv);
 	else
 		mwifiex_set_ba_params(priv);
@@ -1335,8 +1333,7 @@ mwifiex_adhoc_start(struct mwifiex_private *priv,
 		priv->curr_bss_params.band);
 
 	if (ISSUPP_11ACENABLED(priv->adapter->fw_cap_info) &&
-	    (priv->adapter->config_bands & BAND_GAC ||
-	     priv->adapter->config_bands & BAND_AAC))
+	    priv->adapter->config_bands & BAND_AAC)
 		mwifiex_set_11ac_ba_params(priv);
 	else
 		mwifiex_set_ba_params(priv);
@@ -1376,8 +1373,7 @@ int mwifiex_adhoc_join(struct mwifiex_private *priv,
 
 	if (ISSUPP_11ACENABLED(priv->adapter->fw_cap_info) &&
 	    !bss_desc->disable_11n && !bss_desc->disable_11ac &&
-	    (priv->adapter->config_bands & BAND_GAC ||
-	     priv->adapter->config_bands & BAND_AAC))
+	    priv->adapter->config_bands & BAND_AAC)
 		mwifiex_set_11ac_ba_params(priv);
 	else
 		mwifiex_set_ba_params(priv);
diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c
index 0bec94351f36..c3d3ea55d605 100644
--- a/drivers/net/wireless/mwifiex/sta_ioctl.c
+++ b/drivers/net/wireless/mwifiex/sta_ioctl.c
@@ -290,7 +290,7 @@ int mwifiex_bss_start(struct mwifiex_private *priv, struct cfg80211_bss *bss,
 
 		if (mwifiex_band_to_radio_type(bss_desc->bss_band) ==
 						HostCmd_SCAN_RADIO_TYPE_BG)
-			config_bands = BAND_B | BAND_G | BAND_GN | BAND_GAC;
+			config_bands = BAND_B | BAND_G | BAND_GN;
 		else
 			config_bands = BAND_A | BAND_AN | BAND_AAC;
 
-- 
cgit v1.2.2


From b8b3ecec91f106e2f26ac2e24dcda21f63336286 Mon Sep 17 00:00:00 2001
From: Amitkumar Karwar <akarwar@marvell.com>
Date: Fri, 7 Feb 2014 16:23:34 -0800
Subject: mwifiex: change beacon parameter structure

'mwifiex_bcn_param' structure contains five parameters which
are present in beacon buffer in case of legacy scan.

'rssi' field won't be there in this buffer for extended scan.
Hence 'bssid' and 'rssi' are removed from the structure and it is
renamed as 'mwifiex_fixed_bcn_param' so that we can have common
parsing logic later for both.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/fw.h   |  4 +---
 drivers/net/wireless/mwifiex/scan.c | 25 +++++++++++++++----------
 2 files changed, 16 insertions(+), 13 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/fw.h b/drivers/net/wireless/mwifiex/fw.h
index d8014c87d470..9b267901832a 100644
--- a/drivers/net/wireless/mwifiex/fw.h
+++ b/drivers/net/wireless/mwifiex/fw.h
@@ -1047,9 +1047,7 @@ struct host_cmd_ds_rf_ant_siso {
 	__le16 ant_mode;
 };
 
-struct mwifiex_bcn_param {
-	u8 bssid[ETH_ALEN];
-	u8 rssi;
+struct mwifiex_fixed_bcn_param {
 	__le64 timestamp;
 	__le16 beacon_period;
 	__le16 cap_info_bitmap;
diff --git a/drivers/net/wireless/mwifiex/scan.c b/drivers/net/wireless/mwifiex/scan.c
index 0a8a26e10f01..b0be830aa342 100644
--- a/drivers/net/wireless/mwifiex/scan.c
+++ b/drivers/net/wireless/mwifiex/scan.c
@@ -1689,7 +1689,7 @@ int mwifiex_ret_802_11_scan(struct mwifiex_private *priv,
 		u16 cap_info_bitmap;
 		u8 *current_ptr;
 		u64 timestamp;
-		struct mwifiex_bcn_param *bcn_param;
+		struct mwifiex_fixed_bcn_param *bcn_param;
 		struct mwifiex_bss_priv *bss_priv;
 
 		if (bytes_left >= sizeof(beacon_size)) {
@@ -1716,25 +1716,30 @@ int mwifiex_ret_802_11_scan(struct mwifiex_private *priv,
 
 		curr_bcn_bytes = beacon_size;
 
-		/*
-		 * First 5 fields are bssid, RSSI, time stamp, beacon interval,
-		 *   and capability information
+		/* First 5 fields are bssid, RSSI(for legacy scan only),
+		 * time stamp, beacon interval, and capability information
 		 */
-		if (curr_bcn_bytes < sizeof(struct mwifiex_bcn_param)) {
+		if (curr_bcn_bytes < ETH_ALEN + sizeof(u8) +
+		    sizeof(struct mwifiex_fixed_bcn_param)) {
 			dev_err(adapter->dev,
 				"InterpretIE: not enough bytes left\n");
 			continue;
 		}
-		bcn_param = (struct mwifiex_bcn_param *)current_ptr;
-		current_ptr += sizeof(*bcn_param);
-		curr_bcn_bytes -= sizeof(*bcn_param);
 
-		memcpy(bssid, bcn_param->bssid, ETH_ALEN);
+		memcpy(bssid, current_ptr, ETH_ALEN);
+		current_ptr += ETH_ALEN;
+		curr_bcn_bytes -= ETH_ALEN;
 
-		rssi = (s32) bcn_param->rssi;
+		rssi = (s32) *(u8 *)current_ptr;
 		rssi = (-rssi) * 100;		/* Convert dBm to mBm */
+		current_ptr += sizeof(u8);
+		curr_bcn_bytes -= sizeof(u8);
 		dev_dbg(adapter->dev, "info: InterpretIE: RSSI=%d\n", rssi);
 
+		bcn_param = (struct mwifiex_fixed_bcn_param *)current_ptr;
+		current_ptr += sizeof(*bcn_param);
+		curr_bcn_bytes -= sizeof(*bcn_param);
+
 		timestamp = le64_to_cpu(bcn_param->timestamp);
 		beacon_period = le16_to_cpu(bcn_param->beacon_period);
 
-- 
cgit v1.2.2


From 3b4d5c644204476265083a554dad56868b93b9dd Mon Sep 17 00:00:00 2001
From: Amitkumar Karwar <akarwar@marvell.com>
Date: Fri, 7 Feb 2014 16:23:35 -0800
Subject: mwifiex: separate out response buffer parsing code

This new function will be useful later for extended scan
feature.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/scan.c | 309 +++++++++++++++++++-----------------
 1 file changed, 163 insertions(+), 146 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/scan.c b/drivers/net/wireless/mwifiex/scan.c
index b0be830aa342..28f0a38ff2d9 100644
--- a/drivers/net/wireless/mwifiex/scan.c
+++ b/drivers/net/wireless/mwifiex/scan.c
@@ -1576,6 +1576,156 @@ done:
 	return 0;
 }
 
+static int
+mwifiex_parse_single_response_buf(struct mwifiex_private *priv, u8 **bss_info,
+				  u32 *bytes_left, u64 fw_tsf, u8 *radio_type,
+				  bool ext_scan)
+{
+	struct mwifiex_adapter *adapter = priv->adapter;
+	struct mwifiex_chan_freq_power *cfp;
+	struct cfg80211_bss *bss;
+	u8 bssid[ETH_ALEN];
+	s32 rssi;
+	const u8 *ie_buf;
+	size_t ie_len;
+	u16 channel = 0;
+	u16 beacon_size = 0;
+	u32 curr_bcn_bytes;
+	u32 freq;
+	u16 beacon_period;
+	u16 cap_info_bitmap;
+	u8 *current_ptr;
+	u64 timestamp;
+	struct mwifiex_fixed_bcn_param *bcn_param;
+	struct mwifiex_bss_priv *bss_priv;
+
+	if (*bytes_left >= sizeof(beacon_size)) {
+		/* Extract & convert beacon size from command buffer */
+		memcpy(&beacon_size, *bss_info, sizeof(beacon_size));
+		*bytes_left -= sizeof(beacon_size);
+		*bss_info += sizeof(beacon_size);
+	}
+
+	if (!beacon_size || beacon_size > *bytes_left) {
+		*bss_info += *bytes_left;
+		*bytes_left = 0;
+		return -EFAULT;
+	}
+
+	/* Initialize the current working beacon pointer for this BSS
+	 * iteration
+	 */
+	current_ptr = *bss_info;
+
+	/* Advance the return beacon pointer past the current beacon */
+	*bss_info += beacon_size;
+	*bytes_left -= beacon_size;
+
+	curr_bcn_bytes = beacon_size;
+
+	/* First 5 fields are bssid, RSSI(for legacy scan only),
+	 * time stamp, beacon interval, and capability information
+	 */
+	if (curr_bcn_bytes < ETH_ALEN + sizeof(u8) +
+	    sizeof(struct mwifiex_fixed_bcn_param)) {
+		dev_err(adapter->dev, "InterpretIE: not enough bytes left\n");
+		return -EFAULT;
+	}
+
+	memcpy(bssid, current_ptr, ETH_ALEN);
+	current_ptr += ETH_ALEN;
+	curr_bcn_bytes -= ETH_ALEN;
+
+	if (!ext_scan) {
+		rssi = (s32) *(u8 *)current_ptr;
+		rssi = (-rssi) * 100;		/* Convert dBm to mBm */
+		current_ptr += sizeof(u8);
+		curr_bcn_bytes -= sizeof(u8);
+		dev_dbg(adapter->dev, "info: InterpretIE: RSSI=%d\n", rssi);
+	}
+
+	bcn_param = (struct mwifiex_fixed_bcn_param *)current_ptr;
+	current_ptr += sizeof(*bcn_param);
+	curr_bcn_bytes -= sizeof(*bcn_param);
+
+	timestamp = le64_to_cpu(bcn_param->timestamp);
+	beacon_period = le16_to_cpu(bcn_param->beacon_period);
+
+	cap_info_bitmap = le16_to_cpu(bcn_param->cap_info_bitmap);
+	dev_dbg(adapter->dev, "info: InterpretIE: capabilities=0x%X\n",
+		cap_info_bitmap);
+
+	/* Rest of the current buffer are IE's */
+	ie_buf = current_ptr;
+	ie_len = curr_bcn_bytes;
+	dev_dbg(adapter->dev, "info: InterpretIE: IELength for this AP = %d\n",
+		curr_bcn_bytes);
+
+	while (curr_bcn_bytes >= sizeof(struct ieee_types_header)) {
+		u8 element_id, element_len;
+
+		element_id = *current_ptr;
+		element_len = *(current_ptr + 1);
+		if (curr_bcn_bytes < element_len +
+				sizeof(struct ieee_types_header)) {
+			dev_err(adapter->dev,
+				"%s: bytes left < IE length\n", __func__);
+			return -EFAULT;
+		}
+		if (element_id == WLAN_EID_DS_PARAMS) {
+			channel = *(current_ptr +
+				    sizeof(struct ieee_types_header));
+			break;
+		}
+
+		current_ptr += element_len + sizeof(struct ieee_types_header);
+		curr_bcn_bytes -= element_len +
+					sizeof(struct ieee_types_header);
+	}
+
+	if (channel) {
+		struct ieee80211_channel *chan;
+		u8 band;
+
+		/* Skip entry if on csa closed channel */
+		if (channel == priv->csa_chan) {
+			dev_dbg(adapter->dev,
+				"Dropping entry on csa closed channel\n");
+			return 0;
+		}
+
+		band = BAND_G;
+		if (radio_type)
+			band = mwifiex_radio_type_to_band(*radio_type &
+							  (BIT(0) | BIT(1)));
+
+		cfp = mwifiex_get_cfp(priv, band, channel, 0);
+
+		freq = cfp ? cfp->freq : 0;
+
+		chan = ieee80211_get_channel(priv->wdev->wiphy, freq);
+
+		if (chan && !(chan->flags & IEEE80211_CHAN_DISABLED)) {
+			bss = cfg80211_inform_bss(priv->wdev->wiphy,
+					    chan, bssid, timestamp,
+					    cap_info_bitmap, beacon_period,
+					    ie_buf, ie_len, rssi, GFP_KERNEL);
+			bss_priv = (struct mwifiex_bss_priv *)bss->priv;
+			bss_priv->band = band;
+			bss_priv->fw_tsf = fw_tsf;
+			if (priv->media_connected &&
+			    !memcmp(bssid, priv->curr_bss_params.bss_descriptor
+				    .mac_address, ETH_ALEN))
+				mwifiex_update_curr_bss_params(priv, bss);
+			cfg80211_put_bss(priv->wdev->wiphy, bss);
+		}
+	} else {
+		dev_dbg(adapter->dev, "missing BSS channel IE\n");
+	}
+
+	return 0;
+}
+
 /*
  * This function handles the command response of scan.
  *
@@ -1609,12 +1759,12 @@ int mwifiex_ret_802_11_scan(struct mwifiex_private *priv,
 	u32 bytes_left;
 	u32 idx;
 	u32 tlv_buf_size;
-	struct mwifiex_chan_freq_power *cfp;
 	struct mwifiex_ie_types_chan_band_list_param_set *chan_band_tlv;
 	struct chan_band_param_set *chan_band;
 	u8 is_bgscan_resp;
 	unsigned long flags;
-	struct cfg80211_bss *bss;
+	__le64 fw_tsf = 0;
+	u8 *radio_type;
 
 	is_bgscan_resp = (le16_to_cpu(resp->command)
 			  == HostCmd_CMD_802_11_BG_SCAN_QUERY);
@@ -1676,107 +1826,6 @@ int mwifiex_ret_802_11_scan(struct mwifiex_private *priv,
 					     &chan_band_tlv);
 
 	for (idx = 0; idx < scan_rsp->number_of_sets && bytes_left; idx++) {
-		u8 bssid[ETH_ALEN];
-		s32 rssi;
-		const u8 *ie_buf;
-		size_t ie_len;
-		u16 channel = 0;
-		__le64 fw_tsf = 0;
-		u16 beacon_size = 0;
-		u32 curr_bcn_bytes;
-		u32 freq;
-		u16 beacon_period;
-		u16 cap_info_bitmap;
-		u8 *current_ptr;
-		u64 timestamp;
-		struct mwifiex_fixed_bcn_param *bcn_param;
-		struct mwifiex_bss_priv *bss_priv;
-
-		if (bytes_left >= sizeof(beacon_size)) {
-			/* Extract & convert beacon size from command buffer */
-			memcpy(&beacon_size, bss_info, sizeof(beacon_size));
-			bytes_left -= sizeof(beacon_size);
-			bss_info += sizeof(beacon_size);
-		}
-
-		if (!beacon_size || beacon_size > bytes_left) {
-			bss_info += bytes_left;
-			bytes_left = 0;
-			ret = -1;
-			goto check_next_scan;
-		}
-
-		/* Initialize the current working beacon pointer for this BSS
-		 * iteration */
-		current_ptr = bss_info;
-
-		/* Advance the return beacon pointer past the current beacon */
-		bss_info += beacon_size;
-		bytes_left -= beacon_size;
-
-		curr_bcn_bytes = beacon_size;
-
-		/* First 5 fields are bssid, RSSI(for legacy scan only),
-		 * time stamp, beacon interval, and capability information
-		 */
-		if (curr_bcn_bytes < ETH_ALEN + sizeof(u8) +
-		    sizeof(struct mwifiex_fixed_bcn_param)) {
-			dev_err(adapter->dev,
-				"InterpretIE: not enough bytes left\n");
-			continue;
-		}
-
-		memcpy(bssid, current_ptr, ETH_ALEN);
-		current_ptr += ETH_ALEN;
-		curr_bcn_bytes -= ETH_ALEN;
-
-		rssi = (s32) *(u8 *)current_ptr;
-		rssi = (-rssi) * 100;		/* Convert dBm to mBm */
-		current_ptr += sizeof(u8);
-		curr_bcn_bytes -= sizeof(u8);
-		dev_dbg(adapter->dev, "info: InterpretIE: RSSI=%d\n", rssi);
-
-		bcn_param = (struct mwifiex_fixed_bcn_param *)current_ptr;
-		current_ptr += sizeof(*bcn_param);
-		curr_bcn_bytes -= sizeof(*bcn_param);
-
-		timestamp = le64_to_cpu(bcn_param->timestamp);
-		beacon_period = le16_to_cpu(bcn_param->beacon_period);
-
-		cap_info_bitmap = le16_to_cpu(bcn_param->cap_info_bitmap);
-		dev_dbg(adapter->dev, "info: InterpretIE: capabilities=0x%X\n",
-			cap_info_bitmap);
-
-		/* Rest of the current buffer are IE's */
-		ie_buf = current_ptr;
-		ie_len = curr_bcn_bytes;
-		dev_dbg(adapter->dev,
-			"info: InterpretIE: IELength for this AP = %d\n",
-			curr_bcn_bytes);
-
-		while (curr_bcn_bytes >= sizeof(struct ieee_types_header)) {
-			u8 element_id, element_len;
-
-			element_id = *current_ptr;
-			element_len = *(current_ptr + 1);
-			if (curr_bcn_bytes < element_len +
-					sizeof(struct ieee_types_header)) {
-				dev_err(priv->adapter->dev,
-					"%s: bytes left < IE length\n",
-					__func__);
-				goto check_next_scan;
-			}
-			if (element_id == WLAN_EID_DS_PARAMS) {
-				channel = *(current_ptr + sizeof(struct ieee_types_header));
-				break;
-			}
-
-			current_ptr += element_len +
-					sizeof(struct ieee_types_header);
-			curr_bcn_bytes -= element_len +
-					sizeof(struct ieee_types_header);
-		}
-
 		/*
 		 * If the TSF TLV was appended to the scan results, save this
 		 * entry's TSF value in the fw_tsf field. It is the firmware's
@@ -1787,51 +1836,19 @@ int mwifiex_ret_802_11_scan(struct mwifiex_private *priv,
 			memcpy(&fw_tsf, &tsf_tlv->tsf_data[idx * TSF_DATA_SIZE],
 			       sizeof(fw_tsf));
 
-		if (channel) {
-			struct ieee80211_channel *chan;
-			u8 band;
-
-			/* Skip entry if on csa closed channel */
-			if (channel == priv->csa_chan) {
-				dev_dbg(adapter->dev,
-					"Dropping entry on csa closed channel\n");
-				continue;
-			}
-
-			band = BAND_G;
-			if (chan_band_tlv) {
-				chan_band =
-					&chan_band_tlv->chan_band_param[idx];
-				band = mwifiex_radio_type_to_band(
-						chan_band->radio_type
-						& (BIT(0) | BIT(1)));
-			}
-
-			cfp = mwifiex_get_cfp(priv, band, channel, 0);
-
-			freq = cfp ? cfp->freq : 0;
-
-			chan = ieee80211_get_channel(priv->wdev->wiphy, freq);
-
-			if (chan && !(chan->flags & IEEE80211_CHAN_DISABLED)) {
-				bss = cfg80211_inform_bss(priv->wdev->wiphy,
-					      chan, bssid, timestamp,
-					      cap_info_bitmap, beacon_period,
-					      ie_buf, ie_len, rssi, GFP_KERNEL);
-				bss_priv = (struct mwifiex_bss_priv *)bss->priv;
-				bss_priv->band = band;
-				bss_priv->fw_tsf = le64_to_cpu(fw_tsf);
-				if (priv->media_connected &&
-				    !memcmp(bssid,
-					    priv->curr_bss_params.bss_descriptor
-					    .mac_address, ETH_ALEN))
-					mwifiex_update_curr_bss_params(priv,
-								       bss);
-				cfg80211_put_bss(priv->wdev->wiphy, bss);
-			}
+		if (chan_band_tlv) {
+			chan_band = &chan_band_tlv->chan_band_param[idx];
+			radio_type = &chan_band->radio_type;
 		} else {
-			dev_dbg(adapter->dev, "missing BSS channel IE\n");
+			radio_type = NULL;
 		}
+
+		ret = mwifiex_parse_single_response_buf(priv, &bss_info,
+							&bytes_left,
+							le64_to_cpu(fw_tsf),
+							radio_type, false);
+		if (ret)
+			goto check_next_scan;
 	}
 
 check_next_scan:
-- 
cgit v1.2.2


From d44b5c2f2ec54569006dc85c7dbe25ccd41cfb73 Mon Sep 17 00:00:00 2001
From: Amitkumar Karwar <akarwar@marvell.com>
Date: Fri, 7 Feb 2014 16:23:36 -0800
Subject: mwifiex: separate out next scan command queueing logic

This new function will be useful later for extended scan
feature.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/scan.c | 133 +++++++++++++++++++-----------------
 1 file changed, 71 insertions(+), 62 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/scan.c b/drivers/net/wireless/mwifiex/scan.c
index 28f0a38ff2d9..3633347f50f6 100644
--- a/drivers/net/wireless/mwifiex/scan.c
+++ b/drivers/net/wireless/mwifiex/scan.c
@@ -1726,6 +1726,76 @@ mwifiex_parse_single_response_buf(struct mwifiex_private *priv, u8 **bss_info,
 	return 0;
 }
 
+static void mwifiex_check_next_scan_command(struct mwifiex_private *priv)
+{
+	struct mwifiex_adapter *adapter = priv->adapter;
+	struct cmd_ctrl_node *cmd_node;
+	unsigned long flags;
+
+	spin_lock_irqsave(&adapter->scan_pending_q_lock, flags);
+	if (list_empty(&adapter->scan_pending_q)) {
+		spin_unlock_irqrestore(&adapter->scan_pending_q_lock, flags);
+		spin_lock_irqsave(&adapter->mwifiex_cmd_lock, flags);
+		adapter->scan_processing = false;
+		spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, flags);
+
+		/* Need to indicate IOCTL complete */
+		if (adapter->curr_cmd->wait_q_enabled) {
+			adapter->cmd_wait_q.status = 0;
+			if (!priv->scan_request) {
+				dev_dbg(adapter->dev,
+					"complete internal scan\n");
+				mwifiex_complete_cmd(adapter,
+						     adapter->curr_cmd);
+			}
+		}
+		if (priv->report_scan_result)
+			priv->report_scan_result = false;
+
+		if (priv->scan_request) {
+			dev_dbg(adapter->dev, "info: notifying scan done\n");
+			cfg80211_scan_done(priv->scan_request, 0);
+			priv->scan_request = NULL;
+		} else {
+			priv->scan_aborting = false;
+			dev_dbg(adapter->dev, "info: scan already aborted\n");
+		}
+	} else {
+		if ((priv->scan_aborting && !priv->scan_request) ||
+		    priv->scan_block) {
+			spin_unlock_irqrestore(&adapter->scan_pending_q_lock,
+					       flags);
+			adapter->scan_delay_cnt = MWIFIEX_MAX_SCAN_DELAY_CNT;
+			mod_timer(&priv->scan_delay_timer, jiffies);
+			dev_dbg(priv->adapter->dev,
+				"info: %s: triggerring scan abort\n", __func__);
+		} else if (!mwifiex_wmm_lists_empty(adapter) &&
+			   (priv->scan_request && (priv->scan_request->flags &
+					    NL80211_SCAN_FLAG_LOW_PRIORITY))) {
+			spin_unlock_irqrestore(&adapter->scan_pending_q_lock,
+					       flags);
+			adapter->scan_delay_cnt = 1;
+			mod_timer(&priv->scan_delay_timer, jiffies +
+				  msecs_to_jiffies(MWIFIEX_SCAN_DELAY_MSEC));
+			dev_dbg(priv->adapter->dev,
+				"info: %s: deferring scan\n", __func__);
+		} else {
+			/* Get scan command from scan_pending_q and put to
+			 * cmd_pending_q
+			 */
+			cmd_node = list_first_entry(&adapter->scan_pending_q,
+						    struct cmd_ctrl_node, list);
+			list_del(&cmd_node->list);
+			spin_unlock_irqrestore(&adapter->scan_pending_q_lock,
+					       flags);
+			mwifiex_insert_cmd_to_pending_q(adapter, cmd_node,
+							true);
+		}
+	}
+
+	return;
+}
+
 /*
  * This function handles the command response of scan.
  *
@@ -1750,7 +1820,6 @@ int mwifiex_ret_802_11_scan(struct mwifiex_private *priv,
 {
 	int ret = 0;
 	struct mwifiex_adapter *adapter = priv->adapter;
-	struct cmd_ctrl_node *cmd_node;
 	struct host_cmd_ds_802_11_scan_rsp *scan_rsp;
 	struct mwifiex_ie_types_data *tlv_data;
 	struct mwifiex_ie_types_tsf_timestamp *tsf_tlv;
@@ -1762,7 +1831,6 @@ int mwifiex_ret_802_11_scan(struct mwifiex_private *priv,
 	struct mwifiex_ie_types_chan_band_list_param_set *chan_band_tlv;
 	struct chan_band_param_set *chan_band;
 	u8 is_bgscan_resp;
-	unsigned long flags;
 	__le64 fw_tsf = 0;
 	u8 *radio_type;
 
@@ -1852,66 +1920,7 @@ int mwifiex_ret_802_11_scan(struct mwifiex_private *priv,
 	}
 
 check_next_scan:
-	spin_lock_irqsave(&adapter->scan_pending_q_lock, flags);
-	if (list_empty(&adapter->scan_pending_q)) {
-		spin_unlock_irqrestore(&adapter->scan_pending_q_lock, flags);
-		spin_lock_irqsave(&adapter->mwifiex_cmd_lock, flags);
-		adapter->scan_processing = false;
-		spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, flags);
-
-		/* Need to indicate IOCTL complete */
-		if (adapter->curr_cmd->wait_q_enabled) {
-			adapter->cmd_wait_q.status = 0;
-			if (!priv->scan_request) {
-				dev_dbg(adapter->dev,
-					"complete internal scan\n");
-				mwifiex_complete_cmd(adapter,
-						     adapter->curr_cmd);
-			}
-		}
-		if (priv->report_scan_result)
-			priv->report_scan_result = false;
-
-		if (priv->scan_request) {
-			dev_dbg(adapter->dev, "info: notifying scan done\n");
-			cfg80211_scan_done(priv->scan_request, 0);
-			priv->scan_request = NULL;
-		} else {
-			priv->scan_aborting = false;
-			dev_dbg(adapter->dev, "info: scan already aborted\n");
-		}
-	} else {
-		if ((priv->scan_aborting && !priv->scan_request) ||
-		    priv->scan_block) {
-			spin_unlock_irqrestore(&adapter->scan_pending_q_lock,
-					       flags);
-			adapter->scan_delay_cnt = MWIFIEX_MAX_SCAN_DELAY_CNT;
-			mod_timer(&priv->scan_delay_timer, jiffies);
-			dev_dbg(priv->adapter->dev,
-				"info: %s: triggerring scan abort\n", __func__);
-		} else if (!mwifiex_wmm_lists_empty(adapter) &&
-			   (priv->scan_request && (priv->scan_request->flags &
-					    NL80211_SCAN_FLAG_LOW_PRIORITY))) {
-			spin_unlock_irqrestore(&adapter->scan_pending_q_lock,
-					       flags);
-			adapter->scan_delay_cnt = 1;
-			mod_timer(&priv->scan_delay_timer, jiffies +
-				  msecs_to_jiffies(MWIFIEX_SCAN_DELAY_MSEC));
-			dev_dbg(priv->adapter->dev,
-				"info: %s: deferring scan\n", __func__);
-		} else {
-			/* Get scan command from scan_pending_q and put to
-			   cmd_pending_q */
-			cmd_node = list_first_entry(&adapter->scan_pending_q,
-						    struct cmd_ctrl_node, list);
-			list_del(&cmd_node->list);
-			spin_unlock_irqrestore(&adapter->scan_pending_q_lock,
-					       flags);
-			mwifiex_insert_cmd_to_pending_q(adapter, cmd_node,
-							true);
-		}
-	}
-
+	mwifiex_check_next_scan_command(priv);
 	return ret;
 }
 
-- 
cgit v1.2.2


From 21f58d200388480547df909b5464b5aafebf299d Mon Sep 17 00:00:00 2001
From: Amitkumar Karwar <akarwar@marvell.com>
Date: Tue, 11 Feb 2014 18:39:56 -0800
Subject: mwifiex: implement extended scan feature

In extended scan, host gets scan results through one or
multiple events instead of scan command response. Host will
send next scan command when all the events are received.

Legacy scan sometimes truncates scan results in a noisy
environment due to buffer length limitation. This issue
is addressed in extended scan.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/cmdevt.c      |   3 +-
 drivers/net/wireless/mwifiex/fw.h          |  43 +++++++
 drivers/net/wireless/mwifiex/init.c        |   1 +
 drivers/net/wireless/mwifiex/main.h        |   9 +-
 drivers/net/wireless/mwifiex/scan.c        | 191 ++++++++++++++++++++++++++++-
 drivers/net/wireless/mwifiex/sta_cmd.c     |   3 +
 drivers/net/wireless/mwifiex/sta_cmdresp.c |   5 +
 drivers/net/wireless/mwifiex/sta_event.c   |   8 ++
 8 files changed, 255 insertions(+), 8 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c
index 1ddc8b2e3722..556cb2c74e30 100644
--- a/drivers/net/wireless/mwifiex/cmdevt.c
+++ b/drivers/net/wireless/mwifiex/cmdevt.c
@@ -595,7 +595,8 @@ int mwifiex_send_cmd_async(struct mwifiex_private *priv, uint16_t cmd_no,
 	}
 
 	/* Send command */
-	if (cmd_no == HostCmd_CMD_802_11_SCAN) {
+	if (cmd_no == HostCmd_CMD_802_11_SCAN ||
+	    cmd_no == HostCmd_CMD_802_11_SCAN_EXT) {
 		mwifiex_queue_scan_cmd(priv, cmd_node);
 	} else {
 		mwifiex_insert_cmd_to_pending_q(adapter, cmd_node, true);
diff --git a/drivers/net/wireless/mwifiex/fw.h b/drivers/net/wireless/mwifiex/fw.h
index 9b267901832a..ed41af17b213 100644
--- a/drivers/net/wireless/mwifiex/fw.h
+++ b/drivers/net/wireless/mwifiex/fw.h
@@ -132,6 +132,7 @@ enum MWIFIEX_802_11_PRIVACY_FILTER {
 #define TLV_TYPE_RSSI_HIGH          (PROPRIETARY_TLV_BASE_ID + 22)
 #define TLV_TYPE_AUTH_TYPE          (PROPRIETARY_TLV_BASE_ID + 31)
 #define TLV_TYPE_STA_MAC_ADDR       (PROPRIETARY_TLV_BASE_ID + 32)
+#define TLV_TYPE_BSSID              (PROPRIETARY_TLV_BASE_ID + 35)
 #define TLV_TYPE_CHANNELBANDLIST    (PROPRIETARY_TLV_BASE_ID + 42)
 #define TLV_TYPE_UAP_BEACON_PERIOD  (PROPRIETARY_TLV_BASE_ID + 44)
 #define TLV_TYPE_UAP_DTIM_PERIOD    (PROPRIETARY_TLV_BASE_ID + 45)
@@ -146,6 +147,8 @@ enum MWIFIEX_802_11_PRIVACY_FILTER {
 #define TLV_TYPE_RATE_DROP_CONTROL  (PROPRIETARY_TLV_BASE_ID + 82)
 #define TLV_TYPE_RATE_SCOPE         (PROPRIETARY_TLV_BASE_ID + 83)
 #define TLV_TYPE_POWER_GROUP        (PROPRIETARY_TLV_BASE_ID + 84)
+#define TLV_TYPE_BSS_SCAN_RSP       (PROPRIETARY_TLV_BASE_ID + 86)
+#define TLV_TYPE_BSS_SCAN_INFO      (PROPRIETARY_TLV_BASE_ID + 87)
 #define TLV_TYPE_UAP_RETRY_LIMIT    (PROPRIETARY_TLV_BASE_ID + 93)
 #define TLV_TYPE_WAPI_IE            (PROPRIETARY_TLV_BASE_ID + 94)
 #define TLV_TYPE_UAP_MGMT_FRAME     (PROPRIETARY_TLV_BASE_ID + 104)
@@ -295,6 +298,7 @@ enum MWIFIEX_802_11_PRIVACY_FILTER {
 #define HostCmd_CMD_CAU_REG_ACCESS                    0x00ed
 #define HostCmd_CMD_SET_BSS_MODE                      0x00f7
 #define HostCmd_CMD_PCIE_DESC_DETAILS                 0x00fa
+#define HostCmd_CMD_802_11_SCAN_EXT                   0x0107
 #define HostCmd_CMD_COALESCE_CFG                      0x010a
 #define HostCmd_CMD_MGMT_FRAME_REG                    0x010c
 #define HostCmd_CMD_REMAIN_ON_CHAN                    0x010d
@@ -440,6 +444,7 @@ enum P2P_MODES {
 #define EVENT_UAP_MIC_COUNTERMEASURES   0x0000004c
 #define EVENT_HOSTWAKE_STAIE		0x0000004d
 #define EVENT_CHANNEL_SWITCH_ANN        0x00000050
+#define EVENT_EXT_SCAN_REPORT           0x00000058
 #define EVENT_REMAIN_ON_CHAN_EXPIRED    0x0000005f
 
 #define EVENT_ID_MASK                   0xffff
@@ -1053,6 +1058,16 @@ struct mwifiex_fixed_bcn_param {
 	__le16 cap_info_bitmap;
 } __packed;
 
+struct mwifiex_event_scan_result {
+	__le16 event_id;
+	u8 bss_index;
+	u8 bss_type;
+	u8 more_event;
+	u8 reserved[3];
+	__le16 buf_size;
+	u8 num_of_set;
+} __packed;
+
 #define MWIFIEX_USER_SCAN_CHAN_MAX             50
 
 #define MWIFIEX_MAX_SSID_LIST_LENGTH         10
@@ -1122,6 +1137,28 @@ struct host_cmd_ds_802_11_scan_rsp {
 	u8 bss_desc_and_tlv_buffer[1];
 } __packed;
 
+struct host_cmd_ds_802_11_scan_ext {
+	u32   reserved;
+	u8    tlv_buffer[1];
+} __packed;
+
+struct mwifiex_ie_types_bss_scan_rsp {
+	struct mwifiex_ie_types_header header;
+	u8 bssid[ETH_ALEN];
+	u8 frame_body[1];
+} __packed;
+
+struct mwifiex_ie_types_bss_scan_info {
+	struct mwifiex_ie_types_header header;
+	__le16 rssi;
+	__le16 anpi;
+	u8 cca_busy_fraction;
+	u8 radio_type;
+	u8 channel;
+	u8 reserved;
+	__le64 tsf;
+} __packed;
+
 struct host_cmd_ds_802_11_bg_scan_query {
 	u8 flush;
 } __packed;
@@ -1439,6 +1476,11 @@ struct host_cmd_tlv_rates {
 	u8 rates[0];
 } __packed;
 
+struct mwifiex_ie_types_bssid_list {
+	struct mwifiex_ie_types_header header;
+	u8 bssid[ETH_ALEN];
+} __packed;
+
 struct host_cmd_tlv_bcast_ssid {
 	struct mwifiex_ie_types_header header;
 	u8 bcast_ctl;
@@ -1632,6 +1674,7 @@ struct host_cmd_ds_command {
 		struct host_cmd_ds_802_11_ps_mode_enh psmode_enh;
 		struct host_cmd_ds_802_11_hs_cfg_enh opt_hs_cfg;
 		struct host_cmd_ds_802_11_scan scan;
+		struct host_cmd_ds_802_11_scan_ext ext_scan;
 		struct host_cmd_ds_802_11_scan_rsp scan_resp;
 		struct host_cmd_ds_802_11_bg_scan_query bg_scan_query;
 		struct host_cmd_ds_802_11_bg_scan_query_rsp bg_scan_query_resp;
diff --git a/drivers/net/wireless/mwifiex/init.c b/drivers/net/wireless/mwifiex/init.c
index 1d0a817f2bf0..308c56fd32eb 100644
--- a/drivers/net/wireless/mwifiex/init.c
+++ b/drivers/net/wireless/mwifiex/init.c
@@ -281,6 +281,7 @@ static void mwifiex_init_adapter(struct mwifiex_adapter *adapter)
 	adapter->arp_filter_size = 0;
 	adapter->max_mgmt_ie_index = MAX_MGMT_IE_INDEX;
 	adapter->empty_tx_q_cnt = 0;
+	adapter->ext_scan = true;
 }
 
 /*
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index 29d27d9b5ebe..c473f54ba738 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -59,7 +59,7 @@ enum {
 
 #define MWIFIEX_UPLD_SIZE               (2312)
 
-#define MAX_EVENT_SIZE                  1024
+#define MAX_EVENT_SIZE                  2048
 
 #define ARP_FILTER_MAX_BUF_SIZE         68
 
@@ -753,6 +753,7 @@ struct mwifiex_adapter {
 	atomic_t is_tx_received;
 	atomic_t pending_bridged_pkts;
 	struct semaphore *card_sem;
+	bool ext_scan;
 };
 
 int mwifiex_init_lock_list(struct mwifiex_adapter *adapter);
@@ -938,6 +939,12 @@ mwifiex_set_wmm_params(struct mwifiex_private *priv,
 		       struct cfg80211_ap_settings *params);
 void mwifiex_set_ba_params(struct mwifiex_private *priv);
 void mwifiex_set_11ac_ba_params(struct mwifiex_private *priv);
+int mwifiex_cmd_802_11_scan_ext(struct mwifiex_private *priv,
+				struct host_cmd_ds_command *cmd,
+				void *data_buf);
+int mwifiex_ret_802_11_scan_ext(struct mwifiex_private *priv);
+int mwifiex_handle_event_ext_scan_report(struct mwifiex_private *priv,
+					 void *buf);
 
 /*
  * This function checks if the queuing is RA based or not.
diff --git a/drivers/net/wireless/mwifiex/scan.c b/drivers/net/wireless/mwifiex/scan.c
index 3633347f50f6..c548a7d4877d 100644
--- a/drivers/net/wireless/mwifiex/scan.c
+++ b/drivers/net/wireless/mwifiex/scan.c
@@ -595,7 +595,7 @@ mwifiex_scan_channel_list(struct mwifiex_private *priv,
 	struct mwifiex_chan_scan_param_set *tmp_chan_list;
 	struct mwifiex_chan_scan_param_set *start_chan;
 
-	u32 tlv_idx, rates_size;
+	u32 tlv_idx, rates_size, cmd_no;
 	u32 total_scan_time;
 	u32 done_early;
 	u8 radio_type;
@@ -733,9 +733,13 @@ mwifiex_scan_channel_list(struct mwifiex_private *priv,
 
 		/* Send the scan command to the firmware with the specified
 		   cfg */
-		ret = mwifiex_send_cmd_async(priv, HostCmd_CMD_802_11_SCAN,
-					     HostCmd_ACT_GEN_SET, 0,
-					     scan_cfg_out);
+		if (priv->adapter->ext_scan)
+			cmd_no = HostCmd_CMD_802_11_SCAN_EXT;
+		else
+			cmd_no = HostCmd_CMD_802_11_SCAN;
+
+		ret = mwifiex_send_cmd_async(priv, cmd_no, HostCmd_ACT_GEN_SET,
+					     0, scan_cfg_out);
 
 		/* rate IE is updated per scan command but same starting
 		 * pointer is used each time so that rate IE from earlier
@@ -786,6 +790,7 @@ mwifiex_config_scan(struct mwifiex_private *priv,
 	struct mwifiex_adapter *adapter = priv->adapter;
 	struct mwifiex_ie_types_num_probes *num_probes_tlv;
 	struct mwifiex_ie_types_wildcard_ssid_params *wildcard_ssid_tlv;
+	struct mwifiex_ie_types_bssid_list *bssid_tlv;
 	u8 *tlv_pos;
 	u32 num_probes;
 	u32 ssid_len;
@@ -848,6 +853,17 @@ mwifiex_config_scan(struct mwifiex_private *priv,
 		       user_scan_in->specific_bssid,
 		       sizeof(scan_cfg_out->specific_bssid));
 
+		if (adapter->ext_scan &&
+		    !is_zero_ether_addr(scan_cfg_out->specific_bssid)) {
+			bssid_tlv =
+				(struct mwifiex_ie_types_bssid_list *)tlv_pos;
+			bssid_tlv->header.type = cpu_to_le16(TLV_TYPE_BSSID);
+			bssid_tlv->header.len = cpu_to_le16(ETH_ALEN);
+			memcpy(bssid_tlv->bssid, user_scan_in->specific_bssid,
+			       ETH_ALEN);
+			tlv_pos += sizeof(struct mwifiex_ie_types_bssid_list);
+		}
+
 		for (i = 0; i < user_scan_in->num_ssids; i++) {
 			ssid_len = user_scan_in->ssid_list[i].ssid_len;
 
@@ -1579,7 +1595,7 @@ done:
 static int
 mwifiex_parse_single_response_buf(struct mwifiex_private *priv, u8 **bss_info,
 				  u32 *bytes_left, u64 fw_tsf, u8 *radio_type,
-				  bool ext_scan)
+				  bool ext_scan, s32 rssi_val)
 {
 	struct mwifiex_adapter *adapter = priv->adapter;
 	struct mwifiex_chan_freq_power *cfp;
@@ -1642,6 +1658,8 @@ mwifiex_parse_single_response_buf(struct mwifiex_private *priv, u8 **bss_info,
 		current_ptr += sizeof(u8);
 		curr_bcn_bytes -= sizeof(u8);
 		dev_dbg(adapter->dev, "info: InterpretIE: RSSI=%d\n", rssi);
+	} else {
+		rssi = rssi_val;
 	}
 
 	bcn_param = (struct mwifiex_fixed_bcn_param *)current_ptr;
@@ -1914,7 +1932,7 @@ int mwifiex_ret_802_11_scan(struct mwifiex_private *priv,
 		ret = mwifiex_parse_single_response_buf(priv, &bss_info,
 							&bytes_left,
 							le64_to_cpu(fw_tsf),
-							radio_type, false);
+							radio_type, false, 0);
 		if (ret)
 			goto check_next_scan;
 	}
@@ -1924,6 +1942,167 @@ check_next_scan:
 	return ret;
 }
 
+/*
+ * This function prepares an extended scan command to be sent to the firmware
+ *
+ * This uses the scan command configuration sent to the command processing
+ * module in command preparation stage to configure a extended scan command
+ * structure to send to firmware.
+ */
+int mwifiex_cmd_802_11_scan_ext(struct mwifiex_private *priv,
+				struct host_cmd_ds_command *cmd,
+				void *data_buf)
+{
+	struct host_cmd_ds_802_11_scan_ext *ext_scan = &cmd->params.ext_scan;
+	struct mwifiex_scan_cmd_config *scan_cfg = data_buf;
+
+	memcpy(ext_scan->tlv_buffer, scan_cfg->tlv_buf, scan_cfg->tlv_buf_len);
+
+	cmd->command = cpu_to_le16(HostCmd_CMD_802_11_SCAN_EXT);
+
+	/* Size is equal to the sizeof(fixed portions) + the TLV len + header */
+	cmd->size = cpu_to_le16((u16)(sizeof(ext_scan->reserved)
+				      + scan_cfg->tlv_buf_len + S_DS_GEN));
+
+	return 0;
+}
+
+/* This function handles the command response of extended scan */
+int mwifiex_ret_802_11_scan_ext(struct mwifiex_private *priv)
+{
+	dev_dbg(priv->adapter->dev, "info: EXT scan returns successfully\n");
+	return 0;
+}
+
+/* This function This function handles the event extended scan report. It
+ * parses extended scan results and informs to cfg80211 stack.
+ */
+int mwifiex_handle_event_ext_scan_report(struct mwifiex_private *priv,
+					 void *buf)
+{
+	int ret = 0;
+	struct mwifiex_adapter *adapter = priv->adapter;
+	u8 *bss_info;
+	u32 bytes_left, bytes_left_for_tlv, idx;
+	u16 type, len;
+	struct mwifiex_ie_types_data *tlv;
+	struct mwifiex_ie_types_bss_scan_rsp *scan_rsp_tlv;
+	struct mwifiex_ie_types_bss_scan_info *scan_info_tlv;
+	u8 *radio_type;
+	u64 fw_tsf = 0;
+	s32 rssi = 0;
+	struct mwifiex_event_scan_result *event_scan = buf;
+	u8 num_of_set = event_scan->num_of_set;
+	u8 *scan_resp = buf + sizeof(struct mwifiex_event_scan_result);
+	u16 scan_resp_size = le16_to_cpu(event_scan->buf_size);
+
+	if (num_of_set > MWIFIEX_MAX_AP) {
+		dev_err(adapter->dev,
+			"EXT_SCAN: Invalid number of AP returned (%d)!!\n",
+			num_of_set);
+		ret = -1;
+		goto check_next_scan;
+	}
+
+	bytes_left = scan_resp_size;
+	dev_dbg(adapter->dev,
+		"EXT_SCAN: size %d, returned %d APs...",
+		scan_resp_size, num_of_set);
+
+	tlv = (struct mwifiex_ie_types_data *)scan_resp;
+
+	for (idx = 0; idx < num_of_set && bytes_left; idx++) {
+		type = le16_to_cpu(tlv->header.type);
+		len = le16_to_cpu(tlv->header.len);
+		if (bytes_left < sizeof(struct mwifiex_ie_types_header) + len) {
+			dev_err(adapter->dev, "EXT_SCAN: Error bytes left < TLV length\n");
+			break;
+		}
+		scan_rsp_tlv = NULL;
+		scan_info_tlv = NULL;
+		bytes_left_for_tlv = bytes_left;
+
+		/* BSS response TLV with beacon or probe response buffer
+		 * at the initial position of each descriptor
+		 */
+		if (type != TLV_TYPE_BSS_SCAN_RSP)
+			break;
+
+		bss_info = (u8 *)tlv;
+		scan_rsp_tlv = (struct mwifiex_ie_types_bss_scan_rsp *)tlv;
+		tlv = (struct mwifiex_ie_types_data *)(tlv->data + len);
+		bytes_left_for_tlv -=
+				(len + sizeof(struct mwifiex_ie_types_header));
+
+		while (bytes_left_for_tlv >=
+		       sizeof(struct mwifiex_ie_types_header) &&
+		       le16_to_cpu(tlv->header.type) != TLV_TYPE_BSS_SCAN_RSP) {
+			type = le16_to_cpu(tlv->header.type);
+			len = le16_to_cpu(tlv->header.len);
+			if (bytes_left_for_tlv <
+			    sizeof(struct mwifiex_ie_types_header) + len) {
+				dev_err(adapter->dev,
+					"EXT_SCAN: Error in processing TLV, bytes left < TLV length\n");
+				scan_rsp_tlv = NULL;
+				bytes_left_for_tlv = 0;
+				continue;
+			}
+			switch (type) {
+			case TLV_TYPE_BSS_SCAN_INFO:
+				scan_info_tlv =
+				  (struct mwifiex_ie_types_bss_scan_info *)tlv;
+				if (len !=
+				 sizeof(struct mwifiex_ie_types_bss_scan_info) -
+				 sizeof(struct mwifiex_ie_types_header)) {
+					bytes_left_for_tlv = 0;
+					continue;
+				}
+				break;
+			default:
+				break;
+			}
+			tlv = (struct mwifiex_ie_types_data *)(tlv->data + len);
+			bytes_left -=
+				(len + sizeof(struct mwifiex_ie_types_header));
+			bytes_left_for_tlv -=
+				(len + sizeof(struct mwifiex_ie_types_header));
+		}
+
+		if (!scan_rsp_tlv)
+			break;
+
+		/* Advance pointer to the beacon buffer length and
+		 * update the bytes count so that the function
+		 * wlan_interpret_bss_desc_with_ie() can handle the
+		 * scan buffer withut any change
+		 */
+		bss_info += sizeof(u16);
+		bytes_left -= sizeof(u16);
+
+		if (scan_info_tlv) {
+			rssi = (s32)(s16)(le16_to_cpu(scan_info_tlv->rssi));
+			rssi *= 100;           /* Convert dBm to mBm */
+			dev_dbg(adapter->dev,
+				"info: InterpretIE: RSSI=%d\n", rssi);
+			fw_tsf = le64_to_cpu(scan_info_tlv->tsf);
+			radio_type = &scan_info_tlv->radio_type;
+		} else {
+			radio_type = NULL;
+		}
+		ret = mwifiex_parse_single_response_buf(priv, &bss_info,
+							&bytes_left, fw_tsf,
+							radio_type, true, rssi);
+		if (ret)
+			goto check_next_scan;
+	}
+
+check_next_scan:
+	if (!event_scan->more_event)
+		mwifiex_check_next_scan_command(priv);
+
+	return ret;
+}
+
 /*
  * This function prepares command for background scan query.
  *
diff --git a/drivers/net/wireless/mwifiex/sta_cmd.c b/drivers/net/wireless/mwifiex/sta_cmd.c
index 9208a8816b80..1b2991261538 100644
--- a/drivers/net/wireless/mwifiex/sta_cmd.c
+++ b/drivers/net/wireless/mwifiex/sta_cmd.c
@@ -1472,6 +1472,9 @@ int mwifiex_sta_prepare_cmd(struct mwifiex_private *priv, uint16_t cmd_no,
 		ret = mwifiex_cmd_ibss_coalescing_status(cmd_ptr, cmd_action,
 							 data_buf);
 		break;
+	case HostCmd_CMD_802_11_SCAN_EXT:
+		ret = mwifiex_cmd_802_11_scan_ext(priv, cmd_ptr, data_buf);
+		break;
 	case HostCmd_CMD_MAC_REG_ACCESS:
 	case HostCmd_CMD_BBP_REG_ACCESS:
 	case HostCmd_CMD_RF_REG_ACCESS:
diff --git a/drivers/net/wireless/mwifiex/sta_cmdresp.c b/drivers/net/wireless/mwifiex/sta_cmdresp.c
index 24523e4015cb..95e13589d2bd 100644
--- a/drivers/net/wireless/mwifiex/sta_cmdresp.c
+++ b/drivers/net/wireless/mwifiex/sta_cmdresp.c
@@ -69,6 +69,7 @@ mwifiex_process_cmdresp_error(struct mwifiex_private *priv,
 
 		break;
 	case HostCmd_CMD_802_11_SCAN:
+	case HostCmd_CMD_802_11_SCAN_EXT:
 		/* Cancel all pending scan command */
 		spin_lock_irqsave(&adapter->scan_pending_q_lock, flags);
 		list_for_each_entry_safe(cmd_node, tmp_node,
@@ -871,6 +872,10 @@ int mwifiex_process_sta_cmdresp(struct mwifiex_private *priv, u16 cmdresp_no,
 		ret = mwifiex_ret_802_11_scan(priv, resp);
 		adapter->curr_cmd->wait_q_enabled = false;
 		break;
+	case HostCmd_CMD_802_11_SCAN_EXT:
+		ret = mwifiex_ret_802_11_scan_ext(priv);
+		adapter->curr_cmd->wait_q_enabled = false;
+		break;
 	case HostCmd_CMD_802_11_BG_SCAN_QUERY:
 		ret = mwifiex_ret_802_11_scan(priv, resp);
 		dev_dbg(adapter->dev,
diff --git a/drivers/net/wireless/mwifiex/sta_event.c b/drivers/net/wireless/mwifiex/sta_event.c
index 8c351f71f72f..de4a6affe72e 100644
--- a/drivers/net/wireless/mwifiex/sta_event.c
+++ b/drivers/net/wireless/mwifiex/sta_event.c
@@ -331,6 +331,14 @@ int mwifiex_process_sta_event(struct mwifiex_private *priv)
 		dev_dbg(adapter->dev, "event: PORT RELEASE\n");
 		break;
 
+	case EVENT_EXT_SCAN_REPORT:
+		dev_dbg(adapter->dev, "event: EXT_SCAN Report\n");
+		if (adapter->ext_scan)
+			ret = mwifiex_handle_event_ext_scan_report(priv,
+						adapter->event_skb->data);
+
+		break;
+
 	case EVENT_WMM_STATUS_CHANGE:
 		dev_dbg(adapter->dev, "event: WMM status changed\n");
 		ret = mwifiex_send_cmd_async(priv, HostCmd_CMD_WMM_GET_STATUS,
-- 
cgit v1.2.2


From dbccc92b5d543d1ead727f1416af9e113a3ccc4a Mon Sep 17 00:00:00 2001
From: Aaron Durbin <adurbin@chromium.org>
Date: Fri, 7 Feb 2014 16:25:50 -0800
Subject: mwifiex: balance dma map/unmap sizes

Depending on the underlying DMA implementation its
not possible to partially unmap DMA buffers. Moreover
its not possible to understand the intent of passing
0 as the size to dma unmap. The intent of this
driver is unmap the entire skb buffer. The only way
to ensure that the size matches on unmap is to store
both the dma address and the size in the skb ca field.

Introduce a mwifiex_dma_mapping structure which tracks
the dma address and the size. Additionally, provide
a mwifiex_unmap_pci_memory() that utilizes the new
structure. This also provide symmetry within the
internal API.

Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Stewart <pstew@chromium.org>
Reviewed-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/pcie.c | 126 ++++++++++++++++--------------------
 drivers/net/wireless/mwifiex/util.h |  20 +++++-
 2 files changed, 72 insertions(+), 74 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/pcie.c b/drivers/net/wireless/mwifiex/pcie.c
index 03688aa14e8a..4e1c6b268f99 100644
--- a/drivers/net/wireless/mwifiex/pcie.c
+++ b/drivers/net/wireless/mwifiex/pcie.c
@@ -39,20 +39,31 @@ static struct semaphore add_remove_card_sem;
 
 static int
 mwifiex_map_pci_memory(struct mwifiex_adapter *adapter, struct sk_buff *skb,
-		       int size, int flags)
+		       size_t size, int flags)
 {
 	struct pcie_service_card *card = adapter->card;
-	dma_addr_t buf_pa;
+	struct mwifiex_dma_mapping mapping;
 
-	buf_pa = pci_map_single(card->dev, skb->data, size, flags);
-	if (pci_dma_mapping_error(card->dev, buf_pa)) {
+	mapping.addr = pci_map_single(card->dev, skb->data, size, flags);
+	if (pci_dma_mapping_error(card->dev, mapping.addr)) {
 		dev_err(adapter->dev, "failed to map pci memory!\n");
 		return -1;
 	}
-	memcpy(skb->cb, &buf_pa, sizeof(dma_addr_t));
+	mapping.len = size;
+	memcpy(skb->cb, &mapping, sizeof(mapping));
 	return 0;
 }
 
+static void mwifiex_unmap_pci_memory(struct mwifiex_adapter *adapter,
+				     struct sk_buff *skb, int flags)
+{
+	struct pcie_service_card *card = adapter->card;
+	struct mwifiex_dma_mapping mapping;
+
+	MWIFIEX_SKB_PACB(skb, &mapping);
+	pci_unmap_single(card->dev, mapping.addr, mapping.len, flags);
+}
+
 /*
  * This function reads sleep cookie and checks if FW is ready
  */
@@ -456,7 +467,7 @@ static int mwifiex_init_rxq_ring(struct mwifiex_adapter *adapter)
 					   PCI_DMA_FROMDEVICE))
 			return -1;
 
-		MWIFIEX_SKB_PACB(skb, &buf_pa);
+		buf_pa = MWIFIEX_SKB_DMA_ADDR(skb);
 
 		dev_dbg(adapter->dev,
 			"info: RX ring: skb=%p len=%d data=%p buf_pa=%#x:%x\n",
@@ -513,7 +524,7 @@ static int mwifiex_pcie_init_evt_ring(struct mwifiex_adapter *adapter)
 					   PCI_DMA_FROMDEVICE))
 			return -1;
 
-		MWIFIEX_SKB_PACB(skb, &buf_pa);
+		buf_pa = MWIFIEX_SKB_DMA_ADDR(skb);
 
 		dev_dbg(adapter->dev,
 			"info: EVT ring: skb=%p len=%d data=%p buf_pa=%#x:%x\n",
@@ -549,8 +560,8 @@ static void mwifiex_cleanup_txq_ring(struct mwifiex_adapter *adapter)
 			desc2 = card->txbd_ring[i];
 			if (card->tx_buf_list[i]) {
 				skb = card->tx_buf_list[i];
-				pci_unmap_single(card->dev, desc2->paddr,
-						 skb->len, PCI_DMA_TODEVICE);
+				mwifiex_unmap_pci_memory(adapter, skb,
+							 PCI_DMA_TODEVICE);
 				dev_kfree_skb_any(skb);
 			}
 			memset(desc2, 0, sizeof(*desc2));
@@ -558,8 +569,8 @@ static void mwifiex_cleanup_txq_ring(struct mwifiex_adapter *adapter)
 			desc = card->txbd_ring[i];
 			if (card->tx_buf_list[i]) {
 				skb = card->tx_buf_list[i];
-				pci_unmap_single(card->dev, desc->paddr,
-						 skb->len, PCI_DMA_TODEVICE);
+				mwifiex_unmap_pci_memory(adapter, skb,
+							 PCI_DMA_TODEVICE);
 				dev_kfree_skb_any(skb);
 			}
 			memset(desc, 0, sizeof(*desc));
@@ -587,8 +598,8 @@ static void mwifiex_cleanup_rxq_ring(struct mwifiex_adapter *adapter)
 			desc2 = card->rxbd_ring[i];
 			if (card->rx_buf_list[i]) {
 				skb = card->rx_buf_list[i];
-				pci_unmap_single(card->dev, desc2->paddr,
-						 skb->len, PCI_DMA_FROMDEVICE);
+				mwifiex_unmap_pci_memory(adapter, skb,
+							 PCI_DMA_FROMDEVICE);
 				dev_kfree_skb_any(skb);
 			}
 			memset(desc2, 0, sizeof(*desc2));
@@ -596,8 +607,8 @@ static void mwifiex_cleanup_rxq_ring(struct mwifiex_adapter *adapter)
 			desc = card->rxbd_ring[i];
 			if (card->rx_buf_list[i]) {
 				skb = card->rx_buf_list[i];
-				pci_unmap_single(card->dev, desc->paddr,
-						 skb->len, PCI_DMA_FROMDEVICE);
+				mwifiex_unmap_pci_memory(adapter, skb,
+							 PCI_DMA_FROMDEVICE);
 				dev_kfree_skb_any(skb);
 			}
 			memset(desc, 0, sizeof(*desc));
@@ -622,8 +633,8 @@ static void mwifiex_cleanup_evt_ring(struct mwifiex_adapter *adapter)
 		desc = card->evtbd_ring[i];
 		if (card->evt_buf_list[i]) {
 			skb = card->evt_buf_list[i];
-			pci_unmap_single(card->dev, desc->paddr, MAX_EVENT_SIZE,
-					 PCI_DMA_FROMDEVICE);
+			mwifiex_unmap_pci_memory(adapter, skb,
+						 PCI_DMA_FROMDEVICE);
 			dev_kfree_skb_any(skb);
 		}
 		card->evt_buf_list[i] = NULL;
@@ -861,7 +872,6 @@ static int mwifiex_pcie_alloc_cmdrsp_buf(struct mwifiex_adapter *adapter)
 static int mwifiex_pcie_delete_cmdrsp_buf(struct mwifiex_adapter *adapter)
 {
 	struct pcie_service_card *card;
-	dma_addr_t buf_pa;
 
 	if (!adapter)
 		return 0;
@@ -869,16 +879,14 @@ static int mwifiex_pcie_delete_cmdrsp_buf(struct mwifiex_adapter *adapter)
 	card = adapter->card;
 
 	if (card && card->cmdrsp_buf) {
-		MWIFIEX_SKB_PACB(card->cmdrsp_buf, &buf_pa);
-		pci_unmap_single(card->dev, buf_pa, MWIFIEX_UPLD_SIZE,
-				 PCI_DMA_FROMDEVICE);
+		mwifiex_unmap_pci_memory(adapter, card->cmdrsp_buf,
+					 PCI_DMA_FROMDEVICE);
 		dev_kfree_skb_any(card->cmdrsp_buf);
 	}
 
 	if (card && card->cmd_buf) {
-		MWIFIEX_SKB_PACB(card->cmd_buf, &buf_pa);
-		pci_unmap_single(card->dev, buf_pa, card->cmd_buf->len,
-				 PCI_DMA_TODEVICE);
+		mwifiex_unmap_pci_memory(adapter, card->cmd_buf,
+					 PCI_DMA_TODEVICE);
 	}
 	return 0;
 }
@@ -956,7 +964,6 @@ static int mwifiex_clean_pcie_ring_buf(struct mwifiex_adapter *adapter)
 static int mwifiex_pcie_send_data_complete(struct mwifiex_adapter *adapter)
 {
 	struct sk_buff *skb;
-	dma_addr_t buf_pa;
 	u32 wrdoneidx, rdptr, num_tx_buffs, unmap_count = 0;
 	struct mwifiex_pcie_buf_desc *desc;
 	struct mwifiex_pfu_buf_desc *desc2;
@@ -986,13 +993,13 @@ static int mwifiex_pcie_send_data_complete(struct mwifiex_adapter *adapter)
 			    reg->tx_start_ptr;
 
 		skb = card->tx_buf_list[wrdoneidx];
+
 		if (skb) {
 			dev_dbg(adapter->dev,
 				"SEND COMP: Detach skb %p at txbd_rdidx=%d\n",
 				skb, wrdoneidx);
-			MWIFIEX_SKB_PACB(skb, &buf_pa);
-			pci_unmap_single(card->dev, buf_pa, skb->len,
-					 PCI_DMA_TODEVICE);
+			mwifiex_unmap_pci_memory(adapter, skb,
+						 PCI_DMA_TODEVICE);
 
 			unmap_count++;
 
@@ -1082,12 +1089,12 @@ mwifiex_pcie_send_data(struct mwifiex_adapter *adapter, struct sk_buff *skb,
 		tmp = (__le16 *)&payload[2];
 		*tmp = cpu_to_le16(MWIFIEX_TYPE_DATA);
 
-		if (mwifiex_map_pci_memory(adapter, skb, skb->len ,
+		if (mwifiex_map_pci_memory(adapter, skb, skb->len,
 					   PCI_DMA_TODEVICE))
 			return -1;
 
 		wrindx = (card->txbd_wrptr & reg->tx_mask) >> reg->tx_start_ptr;
-		MWIFIEX_SKB_PACB(skb, &buf_pa);
+		buf_pa = MWIFIEX_SKB_DMA_ADDR(skb);
 		card->tx_buf_list[wrindx] = skb;
 
 		if (reg->pfu_enabled) {
@@ -1162,8 +1169,7 @@ mwifiex_pcie_send_data(struct mwifiex_adapter *adapter, struct sk_buff *skb,
 
 	return -EINPROGRESS;
 done_unmap:
-	MWIFIEX_SKB_PACB(skb, &buf_pa);
-	pci_unmap_single(card->dev, buf_pa, skb->len, PCI_DMA_TODEVICE);
+	mwifiex_unmap_pci_memory(adapter, skb, PCI_DMA_TODEVICE);
 	card->tx_buf_list[wrindx] = NULL;
 	if (reg->pfu_enabled)
 		memset(desc2, 0, sizeof(*desc2));
@@ -1211,9 +1217,7 @@ static int mwifiex_pcie_process_recv_data(struct mwifiex_adapter *adapter)
 		rd_index = card->rxbd_rdptr & reg->rx_mask;
 		skb_data = card->rx_buf_list[rd_index];
 
-		MWIFIEX_SKB_PACB(skb_data, &buf_pa);
-		pci_unmap_single(card->dev, buf_pa, MWIFIEX_RX_DATA_BUF_SIZE,
-				 PCI_DMA_FROMDEVICE);
+		mwifiex_unmap_pci_memory(adapter, skb_data, PCI_DMA_FROMDEVICE);
 		card->rx_buf_list[rd_index] = NULL;
 
 		/* Get data length from interface header -
@@ -1240,7 +1244,7 @@ static int mwifiex_pcie_process_recv_data(struct mwifiex_adapter *adapter)
 					   PCI_DMA_FROMDEVICE))
 			return -1;
 
-		MWIFIEX_SKB_PACB(skb_tmp, &buf_pa);
+		buf_pa = MWIFIEX_SKB_DMA_ADDR(skb_tmp);
 
 		dev_dbg(adapter->dev,
 			"RECV DATA: Attach new sk_buff %p at rxbd_rdidx=%d\n",
@@ -1316,7 +1320,7 @@ mwifiex_pcie_send_boot_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb)
 	if (mwifiex_map_pci_memory(adapter, skb, skb->len , PCI_DMA_TODEVICE))
 		return -1;
 
-	MWIFIEX_SKB_PACB(skb, &buf_pa);
+	buf_pa = MWIFIEX_SKB_DMA_ADDR(skb);
 
 	/* Write the lower 32bits of the physical address to low command
 	 * address scratch register
@@ -1325,8 +1329,7 @@ mwifiex_pcie_send_boot_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb)
 		dev_err(adapter->dev,
 			"%s: failed to write download command to boot code.\n",
 			__func__);
-		pci_unmap_single(card->dev, buf_pa, MWIFIEX_UPLD_SIZE,
-				 PCI_DMA_TODEVICE);
+		mwifiex_unmap_pci_memory(adapter, skb, PCI_DMA_TODEVICE);
 		return -1;
 	}
 
@@ -1338,8 +1341,7 @@ mwifiex_pcie_send_boot_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb)
 		dev_err(adapter->dev,
 			"%s: failed to write download command to boot code.\n",
 			__func__);
-		pci_unmap_single(card->dev, buf_pa, MWIFIEX_UPLD_SIZE,
-				 PCI_DMA_TODEVICE);
+		mwifiex_unmap_pci_memory(adapter, skb, PCI_DMA_TODEVICE);
 		return -1;
 	}
 
@@ -1348,8 +1350,7 @@ mwifiex_pcie_send_boot_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb)
 		dev_err(adapter->dev,
 			"%s: failed to write command len to cmd_size scratch reg\n",
 			__func__);
-		pci_unmap_single(card->dev, buf_pa, MWIFIEX_UPLD_SIZE,
-				 PCI_DMA_TODEVICE);
+		mwifiex_unmap_pci_memory(adapter, skb, PCI_DMA_TODEVICE);
 		return -1;
 	}
 
@@ -1358,8 +1359,7 @@ mwifiex_pcie_send_boot_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb)
 			      CPU_INTR_DOOR_BELL)) {
 		dev_err(adapter->dev,
 			"%s: failed to assert door-bell intr\n", __func__);
-		pci_unmap_single(card->dev, buf_pa,
-				 MWIFIEX_UPLD_SIZE, PCI_DMA_TODEVICE);
+		mwifiex_unmap_pci_memory(adapter, skb, PCI_DMA_TODEVICE);
 		return -1;
 	}
 
@@ -1433,7 +1433,7 @@ mwifiex_pcie_send_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb)
 	*/
 
 	if (card->cmdrsp_buf) {
-		MWIFIEX_SKB_PACB(card->cmdrsp_buf, &cmdrsp_buf_pa);
+		cmdrsp_buf_pa = MWIFIEX_SKB_DMA_ADDR(card->cmdrsp_buf);
 		/* Write the lower 32bits of the cmdrsp buffer physical
 		   address */
 		if (mwifiex_write_reg(adapter, reg->cmdrsp_addr_lo,
@@ -1454,7 +1454,7 @@ mwifiex_pcie_send_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb)
 		}
 	}
 
-	MWIFIEX_SKB_PACB(card->cmd_buf, &cmd_buf_pa);
+	cmd_buf_pa = MWIFIEX_SKB_DMA_ADDR(card->cmd_buf);
 	/* Write the lower 32bits of the physical address to reg->cmd_addr_lo */
 	if (mwifiex_write_reg(adapter, reg->cmd_addr_lo,
 			      (u32)cmd_buf_pa)) {
@@ -1508,13 +1508,10 @@ static int mwifiex_pcie_process_cmd_complete(struct mwifiex_adapter *adapter)
 	int count = 0;
 	u16 rx_len;
 	__le16 pkt_len;
-	dma_addr_t buf_pa;
 
 	dev_dbg(adapter->dev, "info: Rx CMD Response\n");
 
-	MWIFIEX_SKB_PACB(skb, &buf_pa);
-	pci_unmap_single(card->dev, buf_pa, MWIFIEX_UPLD_SIZE,
-			 PCI_DMA_FROMDEVICE);
+	mwifiex_unmap_pci_memory(adapter, skb, PCI_DMA_FROMDEVICE);
 
 	pkt_len = *((__le16 *)skb->data);
 	rx_len = le16_to_cpu(pkt_len);
@@ -1538,8 +1535,6 @@ static int mwifiex_pcie_process_cmd_complete(struct mwifiex_adapter *adapter)
 		if (mwifiex_map_pci_memory(adapter, skb, MWIFIEX_UPLD_SIZE,
 					   PCI_DMA_FROMDEVICE))
 			return -1;
-
-		MWIFIEX_SKB_PACB(skb, &buf_pa);
 	} else if (mwifiex_pcie_ok_to_access_hw(adapter)) {
 		adapter->curr_cmd->resp_skb = skb;
 		adapter->cmd_resp_received = true;
@@ -1574,7 +1569,6 @@ static int mwifiex_pcie_cmdrsp_complete(struct mwifiex_adapter *adapter,
 					struct sk_buff *skb)
 {
 	struct pcie_service_card *card = adapter->card;
-	dma_addr_t buf_pa;
 	struct sk_buff *skb_tmp;
 
 	if (skb) {
@@ -1587,9 +1581,7 @@ static int mwifiex_pcie_cmdrsp_complete(struct mwifiex_adapter *adapter,
 
 	skb_tmp = card->cmd_buf;
 	if (skb_tmp) {
-		MWIFIEX_SKB_PACB(skb_tmp, &buf_pa);
-		pci_unmap_single(card->dev, buf_pa, skb_tmp->len,
-				 PCI_DMA_FROMDEVICE);
+		mwifiex_unmap_pci_memory(adapter, skb_tmp, PCI_DMA_FROMDEVICE);
 		card->cmd_buf = NULL;
 	}
 
@@ -1605,7 +1597,6 @@ static int mwifiex_pcie_process_event_ready(struct mwifiex_adapter *adapter)
 	const struct mwifiex_pcie_card_reg *reg = card->pcie.reg;
 	u32 rdptr = card->evtbd_rdptr & MWIFIEX_EVTBD_MASK;
 	u32 wrptr, event;
-	dma_addr_t buf_pa;
 	struct mwifiex_evt_buf_desc *desc;
 
 	if (!mwifiex_pcie_ok_to_access_hw(adapter))
@@ -1641,9 +1632,7 @@ static int mwifiex_pcie_process_event_ready(struct mwifiex_adapter *adapter)
 
 		dev_dbg(adapter->dev, "info: Read Index: %d\n", rdptr);
 		skb_cmd = card->evt_buf_list[rdptr];
-		MWIFIEX_SKB_PACB(skb_cmd, &buf_pa);
-		pci_unmap_single(card->dev, buf_pa, MAX_EVENT_SIZE,
-				 PCI_DMA_FROMDEVICE);
+		mwifiex_unmap_pci_memory(adapter, skb_cmd, PCI_DMA_FROMDEVICE);
 
 		/* Take the pointer and set it to event pointer in adapter
 		   and will return back after event handling callback */
@@ -1689,7 +1678,6 @@ static int mwifiex_pcie_event_complete(struct mwifiex_adapter *adapter,
 	int ret = 0;
 	u32 rdptr = card->evtbd_rdptr & MWIFIEX_EVTBD_MASK;
 	u32 wrptr;
-	dma_addr_t buf_pa;
 	struct mwifiex_evt_buf_desc *desc;
 
 	if (!skb)
@@ -1714,11 +1702,9 @@ static int mwifiex_pcie_event_complete(struct mwifiex_adapter *adapter,
 					   MAX_EVENT_SIZE,
 					   PCI_DMA_FROMDEVICE))
 			return -1;
-		MWIFIEX_SKB_PACB(skb, &buf_pa);
 		card->evt_buf_list[rdptr] = skb;
-		MWIFIEX_SKB_PACB(skb, &buf_pa);
 		desc = card->evtbd_ring[rdptr];
-		desc->paddr = buf_pa;
+		desc->paddr = MWIFIEX_SKB_DMA_ADDR(skb);
 		desc->len = (u16)skb->len;
 		desc->flags = 0;
 		skb = NULL;
@@ -1768,7 +1754,6 @@ static int mwifiex_prog_fw_w_helper(struct mwifiex_adapter *adapter,
 	struct sk_buff *skb;
 	u32 txlen, tx_blocks = 0, tries, len;
 	u32 block_retry_cnt = 0;
-	dma_addr_t buf_pa;
 	struct pcie_service_card *card = adapter->card;
 	const struct mwifiex_pcie_card_reg *reg = card->pcie.reg;
 
@@ -1866,8 +1851,6 @@ static int mwifiex_prog_fw_w_helper(struct mwifiex_adapter *adapter,
 			goto done;
 		}
 
-		MWIFIEX_SKB_PACB(skb, &buf_pa);
-
 		/* Wait for the command done interrupt */
 		do {
 			if (mwifiex_read_reg(adapter, PCIE_CPU_INT_STATUS,
@@ -1875,16 +1858,15 @@ static int mwifiex_prog_fw_w_helper(struct mwifiex_adapter *adapter,
 				dev_err(adapter->dev, "%s: Failed to read "
 					"interrupt status during fw dnld.\n",
 					__func__);
-				pci_unmap_single(card->dev, buf_pa, skb->len,
-						 PCI_DMA_TODEVICE);
+				mwifiex_unmap_pci_memory(adapter, skb,
+							 PCI_DMA_TODEVICE);
 				ret = -1;
 				goto done;
 			}
 		} while ((ireg_intr & CPU_INTR_DOOR_BELL) ==
 			 CPU_INTR_DOOR_BELL);
 
-		pci_unmap_single(card->dev, buf_pa, skb->len,
-				 PCI_DMA_TODEVICE);
+		mwifiex_unmap_pci_memory(adapter, skb, PCI_DMA_TODEVICE);
 
 		offset += txlen;
 	} while (true);
diff --git a/drivers/net/wireless/mwifiex/util.h b/drivers/net/wireless/mwifiex/util.h
index cb2d0582bd36..ddae57021397 100644
--- a/drivers/net/wireless/mwifiex/util.h
+++ b/drivers/net/wireless/mwifiex/util.h
@@ -30,8 +30,24 @@ static inline struct mwifiex_txinfo *MWIFIEX_SKB_TXCB(struct sk_buff *skb)
 	return (struct mwifiex_txinfo *)(skb->cb + sizeof(dma_addr_t));
 }
 
-static inline void MWIFIEX_SKB_PACB(struct sk_buff *skb, dma_addr_t *buf_pa)
+struct mwifiex_dma_mapping {
+	dma_addr_t addr;
+	size_t len;
+};
+
+static inline void MWIFIEX_SKB_PACB(struct sk_buff *skb,
+					struct mwifiex_dma_mapping *mapping)
 {
-	memcpy(buf_pa, skb->cb, sizeof(dma_addr_t));
+	memcpy(mapping, skb->cb, sizeof(*mapping));
 }
+
+static inline dma_addr_t MWIFIEX_SKB_DMA_ADDR(struct sk_buff *skb)
+{
+	struct mwifiex_dma_mapping mapping;
+
+	MWIFIEX_SKB_PACB(skb, &mapping);
+
+	return mapping.addr;
+}
+
 #endif /* !_MWIFIEX_UTIL_H_ */
-- 
cgit v1.2.2


From 189b3299fe46c3d3f7555e1c80e8e8691e71faf1 Mon Sep 17 00:00:00 2001
From: Aaron Durbin <adurbin@chromium.org>
Date: Fri, 7 Feb 2014 16:25:51 -0800
Subject: mwifiex: don't leak DMA command skbuffs

The current mwifiex pcie driver assumed that it would get
its cmdrsp_complete() callback called before another command
was sent to unmap the command's skbuff. However, that is not
true. The mwifiex_check_ps_cond() will send a sleep command
to the card without having adapter->curr_cmd set. Within the
workqueue's state machine the adapter's state would be set
to allow commands (curr_cmd = NULL && cmd_sent = false) after
having receieved the response from the sleep command. The
card->cmd_buf would then be overridden with the new command
but the first command's skbuff was not unmapped. This leaks
mapped skbuffs when a bounce buffer is employed.

To rectify this unmap the card->cmd_buf when the response is
received from the card instead of waiting for the
cmdrsp_complete() callback.

Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Stewart <pstew@chromium.org>
Reviewed-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/pcie.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/pcie.c b/drivers/net/wireless/mwifiex/pcie.c
index 4e1c6b268f99..d11d4acf0890 100644
--- a/drivers/net/wireless/mwifiex/pcie.c
+++ b/drivers/net/wireless/mwifiex/pcie.c
@@ -1513,6 +1513,13 @@ static int mwifiex_pcie_process_cmd_complete(struct mwifiex_adapter *adapter)
 
 	mwifiex_unmap_pci_memory(adapter, skb, PCI_DMA_FROMDEVICE);
 
+	/* Unmap the command as a response has been received. */
+	if (card->cmd_buf) {
+		mwifiex_unmap_pci_memory(adapter, card->cmd_buf,
+					 PCI_DMA_TODEVICE);
+		card->cmd_buf = NULL;
+	}
+
 	pkt_len = *((__le16 *)skb->data);
 	rx_len = le16_to_cpu(pkt_len);
 	skb_trim(skb, rx_len);
@@ -1569,7 +1576,6 @@ static int mwifiex_pcie_cmdrsp_complete(struct mwifiex_adapter *adapter,
 					struct sk_buff *skb)
 {
 	struct pcie_service_card *card = adapter->card;
-	struct sk_buff *skb_tmp;
 
 	if (skb) {
 		card->cmdrsp_buf = skb;
@@ -1579,12 +1585,6 @@ static int mwifiex_pcie_cmdrsp_complete(struct mwifiex_adapter *adapter,
 			return -1;
 	}
 
-	skb_tmp = card->cmd_buf;
-	if (skb_tmp) {
-		mwifiex_unmap_pci_memory(adapter, skb_tmp, PCI_DMA_FROMDEVICE);
-		card->cmd_buf = NULL;
-	}
-
 	return 0;
 }
 
-- 
cgit v1.2.2


From 645097cea620cb94d620360226508c6074ec278b Mon Sep 17 00:00:00 2001
From: Amitkumar Karwar <akarwar@marvell.com>
Date: Fri, 7 Feb 2014 16:27:26 -0800
Subject: mwifiex: update beamforming capability field for HT

This patch makes sure that beamforming capability field in
ht capability info gets filled if hardware supports the feature.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/11n.c | 4 ++++
 drivers/net/wireless/mwifiex/fw.h  | 3 +++
 2 files changed, 7 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/11n.c b/drivers/net/wireless/mwifiex/11n.c
index 6261f8c53d44..822e622fa323 100644
--- a/drivers/net/wireless/mwifiex/11n.c
+++ b/drivers/net/wireless/mwifiex/11n.c
@@ -64,6 +64,10 @@ mwifiex_fill_cap_info(struct mwifiex_private *priv, u8 radio_type,
 
 	ht_cap->ht_cap.cap_info = cpu_to_le16(sband->ht_cap.cap);
 	ht_cap->ht_cap.extended_ht_cap_info = cpu_to_le16(ht_ext_cap);
+
+	if (ISSUPP_BEAMFORMING(priv->adapter->hw_dot_11n_dev_cap))
+		ht_cap->ht_cap.tx_BF_cap_info =
+				cpu_to_le32(MWIFIEX_DEF_11N_TX_BF_CAP);
 }
 
 /*
diff --git a/drivers/net/wireless/mwifiex/fw.h b/drivers/net/wireless/mwifiex/fw.h
index ed41af17b213..cad9f86600c2 100644
--- a/drivers/net/wireless/mwifiex/fw.h
+++ b/drivers/net/wireless/mwifiex/fw.h
@@ -186,6 +186,8 @@ enum MWIFIEX_802_11_PRIVACY_FILTER {
 				 (1 << IEEE80211_HT_CAP_RX_STBC_SHIFT) | \
 				 IEEE80211_HT_CAP_SM_PS)
 
+#define MWIFIEX_DEF_11N_TX_BF_CAP	0x09E1E008
+
 #define MWIFIEX_DEF_AMPDU	IEEE80211_HT_AMPDU_PARM_FACTOR
 
 /* dev_cap bitmap
@@ -209,6 +211,7 @@ enum MWIFIEX_802_11_PRIVACY_FILTER {
 #define ISSUPP_GREENFIELD(Dot11nDevCap) (Dot11nDevCap & BIT(29))
 #define ISENABLED_40MHZ_INTOLERANT(Dot11nDevCap) (Dot11nDevCap & BIT(8))
 #define ISSUPP_RXLDPC(Dot11nDevCap) (Dot11nDevCap & BIT(22))
+#define ISSUPP_BEAMFORMING(Dot11nDevCap) (Dot11nDevCap & BIT(30))
 
 /* httxcfg bitmap
  * 0		reserved
-- 
cgit v1.2.2


From 79d9a54cf0e7c77dd6eada44c1461ad2e7da83b8 Mon Sep 17 00:00:00 2001
From: Amitkumar Karwar <akarwar@marvell.com>
Date: Fri, 7 Feb 2014 16:27:27 -0800
Subject: mwifiex: advertise correct beamforming information for VHT

Currently MU/SU beamformer and MU beamformee features are
not supported.

Hence this patch modifies VHT capability information accordingly.
Number of sounding dimensions should be zero in this case.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/cmdevt.c | 6 ++++--
 drivers/net/wireless/mwifiex/fw.h     | 9 +++++++++
 2 files changed, 13 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c
index 556cb2c74e30..7711b11a9812 100644
--- a/drivers/net/wireless/mwifiex/cmdevt.c
+++ b/drivers/net/wireless/mwifiex/cmdevt.c
@@ -1499,8 +1499,10 @@ int mwifiex_ret_get_hw_spec(struct mwifiex_private *priv,
 		/* Copy 11AC cap */
 		adapter->hw_dot_11ac_dev_cap =
 					le32_to_cpu(hw_spec->dot_11ac_dev_cap);
-		adapter->usr_dot_11ac_dev_cap_bg = adapter->hw_dot_11ac_dev_cap;
-		adapter->usr_dot_11ac_dev_cap_a = adapter->hw_dot_11ac_dev_cap;
+		adapter->usr_dot_11ac_dev_cap_bg = adapter->hw_dot_11ac_dev_cap
+					& ~MWIFIEX_DEF_11AC_CAP_BF_RESET_MASK;
+		adapter->usr_dot_11ac_dev_cap_a = adapter->hw_dot_11ac_dev_cap
+					& ~MWIFIEX_DEF_11AC_CAP_BF_RESET_MASK;
 
 		/* Copy 11AC mcs */
 		adapter->hw_dot_11ac_mcs_support =
diff --git a/drivers/net/wireless/mwifiex/fw.h b/drivers/net/wireless/mwifiex/fw.h
index cad9f86600c2..4139c6f4a52b 100644
--- a/drivers/net/wireless/mwifiex/fw.h
+++ b/drivers/net/wireless/mwifiex/fw.h
@@ -243,6 +243,15 @@ enum MWIFIEX_802_11_PRIVACY_FILTER {
 #define GET_DEVTXMCSMAP(dev_mcs_map)      (dev_mcs_map >> 16)
 #define GET_DEVRXMCSMAP(dev_mcs_map)      (dev_mcs_map & 0xFFFF)
 
+/* Clear SU Beanformer, MU beanformer, MU beanformee and
+ * sounding dimensions bits
+ */
+#define MWIFIEX_DEF_11AC_CAP_BF_RESET_MASK \
+			(IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE | \
+			 IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE | \
+			 IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE | \
+			 IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_MASK)
+
 #define MOD_CLASS_HR_DSSS       0x03
 #define MOD_CLASS_OFDM          0x07
 #define MOD_CLASS_HT            0x08
-- 
cgit v1.2.2


From eac4322729aebf01ae231d3b3f63aae73d469a57 Mon Sep 17 00:00:00 2001
From: Avinash Patil <patila@marvell.com>
Date: Fri, 7 Feb 2014 16:27:28 -0800
Subject: mwifiex: handle AMPDU supported check for AP interface

This patch fixes a bug where we were checking for AP's AMPDU param
setting even when transmitting traffic to associated station.
Patch adds provision to pass additional parameter ra_list pointer
to function which checks if AMPDU is allowed. If current BSS type is
AP, we check station's AMPDU params else we check AP's AMPDU params.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/11n.h | 26 ++++++++++++++++++++------
 drivers/net/wireless/mwifiex/wmm.c |  2 +-
 2 files changed, 21 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/11n.h b/drivers/net/wireless/mwifiex/11n.h
index 375db01442bf..353032d55ff3 100644
--- a/drivers/net/wireless/mwifiex/11n.h
+++ b/drivers/net/wireless/mwifiex/11n.h
@@ -64,14 +64,28 @@ int mwifiex_cmd_amsdu_aggr_ctrl(struct host_cmd_ds_command *cmd,
 				struct mwifiex_ds_11n_amsdu_aggr_ctrl *aa_ctrl);
 void mwifiex_del_tx_ba_stream_tbl_by_ra(struct mwifiex_private *priv, u8 *ra);
 
-/*
- * This function checks whether AMPDU is allowed or not for a particular TID.
- */
 static inline u8
-mwifiex_is_ampdu_allowed(struct mwifiex_private *priv, int tid)
+mwifiex_is_station_ampdu_allowed(struct mwifiex_private *priv,
+				 struct mwifiex_ra_list_tbl *ptr, int tid)
 {
-	return ((priv->aggr_prio_tbl[tid].ampdu_ap != BA_STREAM_NOT_ALLOWED)
-		? true : false);
+	struct mwifiex_sta_node *node = mwifiex_get_sta_entry(priv, ptr->ra);
+
+	if (unlikely(!node))
+		return false;
+
+	return (node->ampdu_sta[tid] != BA_STREAM_NOT_ALLOWED) ? true : false;
+}
+
+/* This function checks whether AMPDU is allowed or not for a particular TID. */
+static inline u8
+mwifiex_is_ampdu_allowed(struct mwifiex_private *priv,
+			 struct mwifiex_ra_list_tbl *ptr, int tid)
+{
+	if (GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_UAP)
+		return mwifiex_is_station_ampdu_allowed(priv, ptr, tid);
+	else
+		return (priv->aggr_prio_tbl[tid].ampdu_ap !=
+			BA_STREAM_NOT_ALLOWED) ? true : false;
 }
 
 /*
diff --git a/drivers/net/wireless/mwifiex/wmm.c b/drivers/net/wireless/mwifiex/wmm.c
index 13eaeed03898..ee447893fe57 100644
--- a/drivers/net/wireless/mwifiex/wmm.c
+++ b/drivers/net/wireless/mwifiex/wmm.c
@@ -1226,7 +1226,7 @@ mwifiex_dequeue_tx_packet(struct mwifiex_adapter *adapter)
 		/* ra_list_spinlock has been freed in
 		   mwifiex_send_single_packet() */
 	} else {
-		if (mwifiex_is_ampdu_allowed(priv, tid) &&
+		if (mwifiex_is_ampdu_allowed(priv, ptr, tid) &&
 		    ptr->ba_pkt_count > ptr->ba_packet_thr) {
 			if (mwifiex_space_avail_for_new_ba_stream(adapter)) {
 				mwifiex_create_ba_tbl(priv, ptr->ra, tid,
-- 
cgit v1.2.2


From 41a24a29142dd0352de965c40b840a90d6e55f6c Mon Sep 17 00:00:00 2001
From: Avinash Patil <patila@marvell.com>
Date: Fri, 7 Feb 2014 16:27:29 -0800
Subject: mwifiex: make tos_to_tid_inv part of mwifiex_private structure

tos_to_tid_inv values are needed even during TDLS restore
operations. Currently tos_to_tid_inv is part of wmm.c and
is declared static.
Make it part of private structure so that it can be used in
other files as well.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/init.c |  1 +
 drivers/net/wireless/mwifiex/main.h |  1 +
 drivers/net/wireless/mwifiex/wmm.c  | 34 +++++++++++-----------------------
 drivers/net/wireless/mwifiex/wmm.h  | 15 +++++++++++++++
 4 files changed, 28 insertions(+), 23 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/init.c b/drivers/net/wireless/mwifiex/init.c
index 308c56fd32eb..dead65960d34 100644
--- a/drivers/net/wireless/mwifiex/init.c
+++ b/drivers/net/wireless/mwifiex/init.c
@@ -137,6 +137,7 @@ int mwifiex_init_priv(struct mwifiex_private *priv)
 	priv->csa_expire_time = 0;
 	priv->del_list_idx = 0;
 	priv->hs2_enabled = false;
+	memcpy(priv->tos_to_tid_inv, tos_to_tid_inv, MAX_NUM_TID);
 
 	return mwifiex_add_bss_prio_tbl(priv);
 }
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index c473f54ba738..39f661a53df5 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -461,6 +461,7 @@ struct mwifiex_private {
 	struct mwifiex_tx_aggr aggr_prio_tbl[MAX_NUM_TID];
 	struct mwifiex_add_ba_param add_ba_param;
 	u16 rx_seq[MAX_NUM_TID];
+	u8 tos_to_tid_inv[MAX_NUM_TID];
 	struct list_head rx_reorder_tbl_ptr;
 	/* spin lock for rx_reorder_tbl_ptr queue */
 	spinlock_t rx_reorder_tbl_lock;
diff --git a/drivers/net/wireless/mwifiex/wmm.c b/drivers/net/wireless/mwifiex/wmm.c
index ee447893fe57..2999c3b1e112 100644
--- a/drivers/net/wireless/mwifiex/wmm.c
+++ b/drivers/net/wireless/mwifiex/wmm.c
@@ -64,21 +64,6 @@ static u8 tos_to_tid[] = {
 	0x07			/* 1 1 1 AC_VO */
 };
 
-/*
- * This table inverses the tos_to_tid operation to get a priority
- * which is in sequential order, and can be compared.
- * Use this to compare the priority of two different TIDs.
- */
-static u8 tos_to_tid_inv[] = {
-	0x02,  /* from tos_to_tid[2] = 0 */
-	0x00,  /* from tos_to_tid[0] = 1 */
-	0x01,  /* from tos_to_tid[1] = 2 */
-	0x03,
-	0x04,
-	0x05,
-	0x06,
-	0x07};
-
 static u8 ac_to_tid[4][2] = { {1, 2}, {0, 3}, {4, 5}, {6, 7} };
 
 /*
@@ -213,8 +198,9 @@ static void mwifiex_wmm_default_queue_priorities(struct mwifiex_private *priv)
  * This function map ACs to TIDs.
  */
 static void
-mwifiex_wmm_queue_priorities_tid(struct mwifiex_wmm_desc *wmm)
+mwifiex_wmm_queue_priorities_tid(struct mwifiex_private *priv)
 {
+	struct mwifiex_wmm_desc *wmm = &priv->wmm;
 	u8 *queue_priority = wmm->queue_priority;
 	int i;
 
@@ -224,7 +210,7 @@ mwifiex_wmm_queue_priorities_tid(struct mwifiex_wmm_desc *wmm)
 	}
 
 	for (i = 0; i < MAX_NUM_TID; ++i)
-		tos_to_tid_inv[tos_to_tid[i]] = (u8)i;
+		priv->tos_to_tid_inv[tos_to_tid[i]] = (u8)i;
 
 	atomic_set(&wmm->highest_queued_prio, HIGH_PRIO_TID);
 }
@@ -285,7 +271,7 @@ mwifiex_wmm_setup_queue_priorities(struct mwifiex_private *priv,
 		}
 	}
 
-	mwifiex_wmm_queue_priorities_tid(&priv->wmm);
+	mwifiex_wmm_queue_priorities_tid(priv);
 }
 
 /*
@@ -421,9 +407,11 @@ mwifiex_wmm_init(struct mwifiex_adapter *adapter)
 			continue;
 
 		for (i = 0; i < MAX_NUM_TID; ++i) {
-			priv->aggr_prio_tbl[i].amsdu = tos_to_tid_inv[i];
-			priv->aggr_prio_tbl[i].ampdu_ap = tos_to_tid_inv[i];
-			priv->aggr_prio_tbl[i].ampdu_user = tos_to_tid_inv[i];
+			priv->aggr_prio_tbl[i].amsdu = priv->tos_to_tid_inv[i];
+			priv->aggr_prio_tbl[i].ampdu_ap =
+							priv->tos_to_tid_inv[i];
+			priv->aggr_prio_tbl[i].ampdu_user =
+							priv->tos_to_tid_inv[i];
 		}
 
 		priv->aggr_prio_tbl[6].amsdu
@@ -683,9 +671,9 @@ mwifiex_wmm_add_buf_txqueue(struct mwifiex_private *priv,
 	ra_list->total_pkt_count++;
 
 	if (atomic_read(&priv->wmm.highest_queued_prio) <
-						tos_to_tid_inv[tid_down])
+						priv->tos_to_tid_inv[tid_down])
 		atomic_set(&priv->wmm.highest_queued_prio,
-			   tos_to_tid_inv[tid_down]);
+			   priv->tos_to_tid_inv[tid_down]);
 
 	atomic_inc(&priv->wmm.tx_pkts_queued);
 
diff --git a/drivers/net/wireless/mwifiex/wmm.h b/drivers/net/wireless/mwifiex/wmm.h
index 0f129d498fb1..d4e607395da7 100644
--- a/drivers/net/wireless/mwifiex/wmm.h
+++ b/drivers/net/wireless/mwifiex/wmm.h
@@ -33,6 +33,21 @@ enum ieee_types_wmm_ecw_bitmasks {
 
 static const u16 mwifiex_1d_to_wmm_queue[8] = { 1, 0, 0, 1, 2, 2, 3, 3 };
 
+/*
+ * This table inverses the tos_to_tid operation to get a priority
+ * which is in sequential order, and can be compared.
+ * Use this to compare the priority of two different TIDs.
+ */
+static const u8 tos_to_tid_inv[] = {
+	0x02,  /* from tos_to_tid[2] = 0 */
+	0x00,  /* from tos_to_tid[0] = 1 */
+	0x01,  /* from tos_to_tid[1] = 2 */
+	0x03,
+	0x04,
+	0x05,
+	0x06,
+	0x07};
+
 /*
  * This function retrieves the TID of the given RA list.
  */
-- 
cgit v1.2.2


From 4bcf93d3a4d6f145e9d871afc4797018d33c4bb1 Mon Sep 17 00:00:00 2001
From: Avinash Patil <patila@marvell.com>
Date: Fri, 7 Feb 2014 16:27:30 -0800
Subject: mwifiex: move station list functions to common code

These functions are now needed by TDLS while managing station list.
Move them from AP related file to utility file.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/main.h      |  10 +++
 drivers/net/wireless/mwifiex/uap_event.c | 118 -------------------------------
 drivers/net/wireless/mwifiex/util.c      | 114 +++++++++++++++++++++++++++++
 3 files changed, 124 insertions(+), 118 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index 39f661a53df5..2114475f03c3 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -1167,6 +1167,16 @@ void mwifiex_dnld_txpwr_table(struct mwifiex_private *priv);
 
 extern const struct ethtool_ops mwifiex_ethtool_ops;
 
+void mwifiex_del_all_sta_list(struct mwifiex_private *priv);
+void mwifiex_del_sta_entry(struct mwifiex_private *priv, u8 *mac);
+void
+mwifiex_set_sta_ht_cap(struct mwifiex_private *priv, const u8 *ies,
+		       int ies_len, struct mwifiex_sta_node *node);
+struct mwifiex_sta_node *
+mwifiex_add_sta_entry(struct mwifiex_private *priv, u8 *mac);
+struct mwifiex_sta_node *
+mwifiex_get_sta_entry(struct mwifiex_private *priv, u8 *mac);
+
 #ifdef CONFIG_DEBUG_FS
 void mwifiex_debugfs_init(void);
 void mwifiex_debugfs_remove(void);
diff --git a/drivers/net/wireless/mwifiex/uap_event.c b/drivers/net/wireless/mwifiex/uap_event.c
index 718066577c6c..2d47ba70225c 100644
--- a/drivers/net/wireless/mwifiex/uap_event.c
+++ b/drivers/net/wireless/mwifiex/uap_event.c
@@ -21,126 +21,8 @@
 #include "main.h"
 #include "11n.h"
 
-/*
- * This function will return the pointer to station entry in station list
- * table which matches specified mac address.
- * This function should be called after acquiring RA list spinlock.
- * NULL is returned if station entry is not found in associated STA list.
- */
-struct mwifiex_sta_node *
-mwifiex_get_sta_entry(struct mwifiex_private *priv, u8 *mac)
-{
-	struct mwifiex_sta_node *node;
-
-	if (!mac)
-		return NULL;
-
-	list_for_each_entry(node, &priv->sta_list, list) {
-		if (!memcmp(node->mac_addr, mac, ETH_ALEN))
-			return node;
-	}
 
-	return NULL;
-}
-
-/*
- * This function will add a sta_node entry to associated station list
- * table with the given mac address.
- * If entry exist already, existing entry is returned.
- * If received mac address is NULL, NULL is returned.
- */
-static struct mwifiex_sta_node *
-mwifiex_add_sta_entry(struct mwifiex_private *priv, u8 *mac)
-{
-	struct mwifiex_sta_node *node;
-	unsigned long flags;
 
-	if (!mac)
-		return NULL;
-
-	spin_lock_irqsave(&priv->sta_list_spinlock, flags);
-	node = mwifiex_get_sta_entry(priv, mac);
-	if (node)
-		goto done;
-
-	node = kzalloc(sizeof(struct mwifiex_sta_node), GFP_ATOMIC);
-	if (!node)
-		goto done;
-
-	memcpy(node->mac_addr, mac, ETH_ALEN);
-	list_add_tail(&node->list, &priv->sta_list);
-
-done:
-	spin_unlock_irqrestore(&priv->sta_list_spinlock, flags);
-	return node;
-}
-
-/*
- * This function will search for HT IE in association request IEs
- * and set station HT parameters accordingly.
- */
-static void
-mwifiex_set_sta_ht_cap(struct mwifiex_private *priv, const u8 *ies,
-		       int ies_len, struct mwifiex_sta_node *node)
-{
-	const struct ieee80211_ht_cap *ht_cap;
-
-	if (!ies)
-		return;
-
-	ht_cap = (void *)cfg80211_find_ie(WLAN_EID_HT_CAPABILITY, ies, ies_len);
-	if (ht_cap) {
-		node->is_11n_enabled = 1;
-		node->max_amsdu = le16_to_cpu(ht_cap->cap_info) &
-				  IEEE80211_HT_CAP_MAX_AMSDU ?
-				  MWIFIEX_TX_DATA_BUF_SIZE_8K :
-				  MWIFIEX_TX_DATA_BUF_SIZE_4K;
-	} else {
-		node->is_11n_enabled = 0;
-	}
-
-	return;
-}
-
-/*
- * This function will delete a station entry from station list
- */
-static void mwifiex_del_sta_entry(struct mwifiex_private *priv, u8 *mac)
-{
-	struct mwifiex_sta_node *node;
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->sta_list_spinlock, flags);
-
-	node = mwifiex_get_sta_entry(priv, mac);
-	if (node) {
-		list_del(&node->list);
-		kfree(node);
-	}
-
-	spin_unlock_irqrestore(&priv->sta_list_spinlock, flags);
-	return;
-}
-
-/*
- * This function will delete all stations from associated station list.
- */
-static void mwifiex_del_all_sta_list(struct mwifiex_private *priv)
-{
-	struct mwifiex_sta_node *node, *tmp;
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->sta_list_spinlock, flags);
-
-	list_for_each_entry_safe(node, tmp, &priv->sta_list, list) {
-		list_del(&node->list);
-		kfree(node);
-	}
-
-	INIT_LIST_HEAD(&priv->sta_list);
-	spin_unlock_irqrestore(&priv->sta_list_spinlock, flags);
-	return;
-}
 
 /*
  * This function handles AP interface specific events generated by firmware.
diff --git a/drivers/net/wireless/mwifiex/util.c b/drivers/net/wireless/mwifiex/util.c
index 9b82e225880c..8d37bfc578bd 100644
--- a/drivers/net/wireless/mwifiex/util.c
+++ b/drivers/net/wireless/mwifiex/util.c
@@ -252,3 +252,117 @@ int mwifiex_complete_cmd(struct mwifiex_adapter *adapter,
 
 	return 0;
 }
+
+/* This function will return the pointer to station entry in station list
+ * table which matches specified mac address.
+ * This function should be called after acquiring RA list spinlock.
+ * NULL is returned if station entry is not found in associated STA list.
+ */
+struct mwifiex_sta_node *
+mwifiex_get_sta_entry(struct mwifiex_private *priv, u8 *mac)
+{
+	struct mwifiex_sta_node *node;
+
+	if (!mac)
+		return NULL;
+
+	list_for_each_entry(node, &priv->sta_list, list) {
+		if (!memcmp(node->mac_addr, mac, ETH_ALEN))
+			return node;
+	}
+
+	return NULL;
+}
+
+/* This function will add a sta_node entry to associated station list
+ * table with the given mac address.
+ * If entry exist already, existing entry is returned.
+ * If received mac address is NULL, NULL is returned.
+ */
+struct mwifiex_sta_node *
+mwifiex_add_sta_entry(struct mwifiex_private *priv, u8 *mac)
+{
+	struct mwifiex_sta_node *node;
+	unsigned long flags;
+
+	if (!mac)
+		return NULL;
+
+	spin_lock_irqsave(&priv->sta_list_spinlock, flags);
+	node = mwifiex_get_sta_entry(priv, mac);
+	if (node)
+		goto done;
+
+	node = kzalloc(sizeof(*node), GFP_ATOMIC);
+	if (!node)
+		goto done;
+
+	memcpy(node->mac_addr, mac, ETH_ALEN);
+	list_add_tail(&node->list, &priv->sta_list);
+
+done:
+	spin_unlock_irqrestore(&priv->sta_list_spinlock, flags);
+	return node;
+}
+
+/* This function will search for HT IE in association request IEs
+ * and set station HT parameters accordingly.
+ */
+void
+mwifiex_set_sta_ht_cap(struct mwifiex_private *priv, const u8 *ies,
+		       int ies_len, struct mwifiex_sta_node *node)
+{
+	const struct ieee80211_ht_cap *ht_cap;
+
+	if (!ies)
+		return;
+
+	ht_cap = (void *)cfg80211_find_ie(WLAN_EID_HT_CAPABILITY, ies, ies_len);
+	if (ht_cap) {
+		node->is_11n_enabled = 1;
+		node->max_amsdu = le16_to_cpu(ht_cap->cap_info) &
+				  IEEE80211_HT_CAP_MAX_AMSDU ?
+				  MWIFIEX_TX_DATA_BUF_SIZE_8K :
+				  MWIFIEX_TX_DATA_BUF_SIZE_4K;
+	} else {
+		node->is_11n_enabled = 0;
+	}
+
+	return;
+}
+
+/* This function will delete a station entry from station list */
+void mwifiex_del_sta_entry(struct mwifiex_private *priv, u8 *mac)
+{
+	struct mwifiex_sta_node *node;
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->sta_list_spinlock, flags);
+
+	node = mwifiex_get_sta_entry(priv, mac);
+	if (node) {
+		list_del(&node->list);
+		kfree(node);
+	}
+
+	spin_unlock_irqrestore(&priv->sta_list_spinlock, flags);
+	return;
+}
+
+/* This function will delete all stations from associated station list. */
+void mwifiex_del_all_sta_list(struct mwifiex_private *priv)
+{
+	struct mwifiex_sta_node *node, *tmp;
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->sta_list_spinlock, flags);
+
+	list_for_each_entry_safe(node, tmp, &priv->sta_list, list) {
+		list_del(&node->list);
+		kfree(node);
+	}
+
+	INIT_LIST_HEAD(&priv->sta_list);
+	spin_unlock_irqrestore(&priv->sta_list_spinlock, flags);
+	return;
+}
-- 
cgit v1.2.2


From 341b88007275121e9d85e3e38fc6b7546a4e7e9d Mon Sep 17 00:00:00 2001
From: Amitkumar Karwar <akarwar@marvell.com>
Date: Fri, 7 Feb 2014 16:27:31 -0800
Subject: mwifiex: cleanup in mwifiex_fill_cap_info()

Pass 'struct ieee80211_ht_cap' pointer to
mwifiex_fill_cap_info() instead of
'struct mwifiex_ie_types_htcap' pointer, because the routine
internally uses the later one.
This patch also adds WARN_ON_ONCE check for NULL band.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/11n.c  | 29 +++++++++++++++++------------
 drivers/net/wireless/mwifiex/11n.h  |  4 ++--
 drivers/net/wireless/mwifiex/join.c |  2 +-
 drivers/net/wireless/mwifiex/scan.c |  2 +-
 4 files changed, 21 insertions(+), 16 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/11n.c b/drivers/net/wireless/mwifiex/11n.c
index 822e622fa323..616b1d6221b9 100644
--- a/drivers/net/wireless/mwifiex/11n.c
+++ b/drivers/net/wireless/mwifiex/11n.c
@@ -34,22 +34,26 @@
  *
  * RD responder bit to set to clear in the extended capability header.
  */
-void
-mwifiex_fill_cap_info(struct mwifiex_private *priv, u8 radio_type,
-		      struct mwifiex_ie_types_htcap *ht_cap)
+int mwifiex_fill_cap_info(struct mwifiex_private *priv, u8 radio_type,
+			  struct ieee80211_ht_cap *ht_cap)
 {
-	uint16_t ht_ext_cap = le16_to_cpu(ht_cap->ht_cap.extended_ht_cap_info);
+	uint16_t ht_ext_cap = le16_to_cpu(ht_cap->extended_ht_cap_info);
 	struct ieee80211_supported_band *sband =
 					priv->wdev->wiphy->bands[radio_type];
 
-	ht_cap->ht_cap.ampdu_params_info =
+	if (WARN_ON_ONCE(!sband)) {
+		dev_err(priv->adapter->dev, "Invalid radio type!\n");
+		return -EINVAL;
+	}
+
+	ht_cap->ampdu_params_info =
 		(sband->ht_cap.ampdu_factor &
 		 IEEE80211_HT_AMPDU_PARM_FACTOR) |
 		((sband->ht_cap.ampdu_density <<
 		 IEEE80211_HT_AMPDU_PARM_DENSITY_SHIFT) &
 		 IEEE80211_HT_AMPDU_PARM_DENSITY);
 
-	memcpy((u8 *) &ht_cap->ht_cap.mcs, &sband->ht_cap.mcs,
+	memcpy((u8 *)&ht_cap->mcs, &sband->ht_cap.mcs,
 	       sizeof(sband->ht_cap.mcs));
 
 	if (priv->bss_mode == NL80211_IFTYPE_STATION ||
@@ -57,17 +61,18 @@ mwifiex_fill_cap_info(struct mwifiex_private *priv, u8 radio_type,
 	     (priv->adapter->sec_chan_offset !=
 					IEEE80211_HT_PARAM_CHA_SEC_NONE)))
 		/* Set MCS32 for infra mode or ad-hoc mode with 40MHz support */
-		SETHT_MCS32(ht_cap->ht_cap.mcs.rx_mask);
+		SETHT_MCS32(ht_cap->mcs.rx_mask);
 
 	/* Clear RD responder bit */
 	ht_ext_cap &= ~IEEE80211_HT_EXT_CAP_RD_RESPONDER;
 
-	ht_cap->ht_cap.cap_info = cpu_to_le16(sband->ht_cap.cap);
-	ht_cap->ht_cap.extended_ht_cap_info = cpu_to_le16(ht_ext_cap);
+	ht_cap->cap_info = cpu_to_le16(sband->ht_cap.cap);
+	ht_cap->extended_ht_cap_info = cpu_to_le16(ht_ext_cap);
 
 	if (ISSUPP_BEAMFORMING(priv->adapter->hw_dot_11n_dev_cap))
-		ht_cap->ht_cap.tx_BF_cap_info =
-				cpu_to_le32(MWIFIEX_DEF_11N_TX_BF_CAP);
+		ht_cap->tx_BF_cap_info = cpu_to_le32(MWIFIEX_DEF_11N_TX_BF_CAP);
+
+	return 0;
 }
 
 /*
@@ -316,7 +321,7 @@ mwifiex_cmd_append_11n_tlv(struct mwifiex_private *priv,
 		       sizeof(struct ieee_types_header),
 		       le16_to_cpu(ht_cap->header.len));
 
-		mwifiex_fill_cap_info(priv, radio_type, ht_cap);
+		mwifiex_fill_cap_info(priv, radio_type, &ht_cap->ht_cap);
 
 		*buffer += sizeof(struct mwifiex_ie_types_htcap);
 		ret_len += sizeof(struct mwifiex_ie_types_htcap);
diff --git a/drivers/net/wireless/mwifiex/11n.h b/drivers/net/wireless/mwifiex/11n.h
index 353032d55ff3..fde39fedf0c0 100644
--- a/drivers/net/wireless/mwifiex/11n.h
+++ b/drivers/net/wireless/mwifiex/11n.h
@@ -34,8 +34,8 @@ int mwifiex_cmd_11n_cfg(struct mwifiex_private *priv,
 int mwifiex_cmd_append_11n_tlv(struct mwifiex_private *priv,
 			       struct mwifiex_bssdescriptor *bss_desc,
 			       u8 **buffer);
-void mwifiex_fill_cap_info(struct mwifiex_private *, u8 radio_type,
-			   struct mwifiex_ie_types_htcap *);
+int mwifiex_fill_cap_info(struct mwifiex_private *, u8 radio_type,
+			  struct ieee80211_ht_cap *);
 int mwifiex_set_get_11n_htcap_cfg(struct mwifiex_private *priv,
 				  u16 action, int *htcap_cfg);
 void mwifiex_11n_delete_tx_ba_stream_tbl_entry(struct mwifiex_private *priv,
diff --git a/drivers/net/wireless/mwifiex/join.c b/drivers/net/wireless/mwifiex/join.c
index d3934c6dbd8a..34472ea53841 100644
--- a/drivers/net/wireless/mwifiex/join.c
+++ b/drivers/net/wireless/mwifiex/join.c
@@ -982,7 +982,7 @@ mwifiex_cmd_802_11_ad_hoc_start(struct mwifiex_private *priv,
 		       cpu_to_le16(sizeof(struct ieee80211_ht_cap));
 		radio_type = mwifiex_band_to_radio_type(
 					priv->adapter->config_bands);
-		mwifiex_fill_cap_info(priv, radio_type, ht_cap);
+		mwifiex_fill_cap_info(priv, radio_type, &ht_cap->ht_cap);
 
 		if (adapter->sec_chan_offset ==
 					IEEE80211_HT_PARAM_CHA_SEC_NONE) {
diff --git a/drivers/net/wireless/mwifiex/scan.c b/drivers/net/wireless/mwifiex/scan.c
index c548a7d4877d..92adbb1ebabc 100644
--- a/drivers/net/wireless/mwifiex/scan.c
+++ b/drivers/net/wireless/mwifiex/scan.c
@@ -957,7 +957,7 @@ mwifiex_config_scan(struct mwifiex_private *priv,
 				cpu_to_le16(sizeof(struct ieee80211_ht_cap));
 		radio_type =
 			mwifiex_band_to_radio_type(priv->adapter->config_bands);
-		mwifiex_fill_cap_info(priv, radio_type, ht_cap);
+		mwifiex_fill_cap_info(priv, radio_type, &ht_cap->ht_cap);
 		tlv_pos += sizeof(struct mwifiex_ie_types_htcap);
 	}
 
-- 
cgit v1.2.2


From b23bce296568011b76c27103032dea5a90291d8a Mon Sep 17 00:00:00 2001
From: Avinash Patil <patila@marvell.com>
Date: Fri, 7 Feb 2014 16:27:32 -0800
Subject: mwifiex: add tdls_mgmt handler support

This patch adds support for TDLS management frames transmit
handler. mwifiex driver supports TDLS with external support,
i.e. expects user space application to form TDLS frames.
Same is advertised to cfg80211 during registration.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/Makefile   |   1 +
 drivers/net/wireless/mwifiex/cfg80211.c |  81 ++++++
 drivers/net/wireless/mwifiex/decl.h     |   1 +
 drivers/net/wireless/mwifiex/fw.h       |   2 +
 drivers/net/wireless/mwifiex/ioctl.h    |   4 +
 drivers/net/wireless/mwifiex/main.h     |  18 ++
 drivers/net/wireless/mwifiex/sta_tx.c   |   3 +
 drivers/net/wireless/mwifiex/tdls.c     | 423 ++++++++++++++++++++++++++++++++
 8 files changed, 533 insertions(+)
 create mode 100644 drivers/net/wireless/mwifiex/tdls.c

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/Makefile b/drivers/net/wireless/mwifiex/Makefile
index a42a506fd32b..2aa208ffbe23 100644
--- a/drivers/net/wireless/mwifiex/Makefile
+++ b/drivers/net/wireless/mwifiex/Makefile
@@ -41,6 +41,7 @@ mwifiex-y += uap_txrx.o
 mwifiex-y += cfg80211.o
 mwifiex-y += ethtool.o
 mwifiex-y += 11h.o
+mwifiex-y += tdls.o
 mwifiex-$(CONFIG_DEBUG_FS) += debugfs.o
 obj-$(CONFIG_MWIFIEX) += mwifiex.o
 
diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index c6606288c61e..2968af273ef9 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -2594,6 +2594,81 @@ static int mwifiex_cfg80211_set_coalesce(struct wiphy *wiphy,
 				     HostCmd_ACT_GEN_SET, 0, &coalesce_cfg);
 }
 
+/* cfg80211 ops handler for tdls_mgmt.
+ * Function prepares TDLS action frame packets and forwards them to FW
+ */
+static int
+mwifiex_cfg80211_tdls_mgmt(struct wiphy *wiphy, struct net_device *dev,
+			   u8 *peer, u8 action_code, u8 dialog_token,
+			   u16 status_code, const u8 *extra_ies,
+			   size_t extra_ies_len)
+{
+	struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
+	int ret;
+
+	if (!(wiphy->flags & WIPHY_FLAG_SUPPORTS_TDLS))
+		return -ENOTSUPP;
+
+	/* make sure we are in station mode and connected */
+	if (!(priv->bss_type == MWIFIEX_BSS_TYPE_STA && priv->media_connected))
+		return -ENOTSUPP;
+
+	switch (action_code) {
+	case WLAN_TDLS_SETUP_REQUEST:
+		dev_dbg(priv->adapter->dev,
+			"Send TDLS Setup Request to %pM status_code=%d\n", peer,
+			 status_code);
+		ret = mwifiex_send_tdls_data_frame(priv, peer, action_code,
+						   dialog_token, status_code,
+						   extra_ies, extra_ies_len);
+		break;
+	case WLAN_TDLS_SETUP_RESPONSE:
+		dev_dbg(priv->adapter->dev,
+			"Send TDLS Setup Response to %pM status_code=%d\n",
+			peer, status_code);
+		ret = mwifiex_send_tdls_data_frame(priv, peer, action_code,
+						   dialog_token, status_code,
+						   extra_ies, extra_ies_len);
+		break;
+	case WLAN_TDLS_SETUP_CONFIRM:
+		dev_dbg(priv->adapter->dev,
+			"Send TDLS Confirm to %pM status_code=%d\n", peer,
+			status_code);
+		ret = mwifiex_send_tdls_data_frame(priv, peer, action_code,
+						   dialog_token, status_code,
+						   extra_ies, extra_ies_len);
+		break;
+	case WLAN_TDLS_TEARDOWN:
+		dev_dbg(priv->adapter->dev, "Send TDLS Tear down to %pM\n",
+			peer);
+		ret = mwifiex_send_tdls_data_frame(priv, peer, action_code,
+						   dialog_token, status_code,
+						   extra_ies, extra_ies_len);
+		break;
+	case WLAN_TDLS_DISCOVERY_REQUEST:
+		dev_dbg(priv->adapter->dev,
+			"Send TDLS Discovery Request to %pM\n", peer);
+		ret = mwifiex_send_tdls_data_frame(priv, peer, action_code,
+						   dialog_token, status_code,
+						   extra_ies, extra_ies_len);
+		break;
+	case WLAN_PUB_ACTION_TDLS_DISCOVER_RES:
+		dev_dbg(priv->adapter->dev,
+			"Send TDLS Discovery Response to %pM\n", peer);
+		ret = mwifiex_send_tdls_action_frame(priv, peer, action_code,
+						   dialog_token, status_code,
+						   extra_ies, extra_ies_len);
+		break;
+	default:
+		dev_warn(priv->adapter->dev,
+			 "Unknown TDLS mgmt/action frame %pM\n", peer);
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
 /* station cfg80211 operations */
 static struct cfg80211_ops mwifiex_cfg80211_ops = {
 	.add_virtual_intf = mwifiex_add_virtual_intf,
@@ -2629,6 +2704,7 @@ static struct cfg80211_ops mwifiex_cfg80211_ops = {
 	.set_wakeup = mwifiex_cfg80211_set_wakeup,
 #endif
 	.set_coalesce = mwifiex_cfg80211_set_coalesce,
+	.tdls_mgmt = mwifiex_cfg80211_tdls_mgmt,
 };
 
 #ifdef CONFIG_PM
@@ -2714,6 +2790,11 @@ int mwifiex_register_cfg80211(struct mwifiex_adapter *adapter)
 			WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD |
 			WIPHY_FLAG_AP_UAPSD |
 			WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL;
+
+	if (ISSUPP_TDLS_ENABLED(adapter->fw_cap_info))
+		wiphy->flags |= WIPHY_FLAG_SUPPORTS_TDLS |
+				WIPHY_FLAG_TDLS_EXTERNAL_SETUP;
+
 	wiphy->regulatory_flags |=
 			REGULATORY_CUSTOM_REG |
 			REGULATORY_STRICT_REG;
diff --git a/drivers/net/wireless/mwifiex/decl.h b/drivers/net/wireless/mwifiex/decl.h
index 3a21bd03d6db..c709f1c25b97 100644
--- a/drivers/net/wireless/mwifiex/decl.h
+++ b/drivers/net/wireless/mwifiex/decl.h
@@ -75,6 +75,7 @@
 
 #define MWIFIEX_BUF_FLAG_REQUEUED_PKT      BIT(0)
 #define MWIFIEX_BUF_FLAG_BRIDGED_PKT	   BIT(1)
+#define MWIFIEX_BUF_FLAG_TDLS_PKT	   BIT(2)
 
 #define MWIFIEX_BRIDGED_PKTS_THR_HIGH      1024
 #define MWIFIEX_BRIDGED_PKTS_THR_LOW        128
diff --git a/drivers/net/wireless/mwifiex/fw.h b/drivers/net/wireless/mwifiex/fw.h
index 4139c6f4a52b..416518a939b2 100644
--- a/drivers/net/wireless/mwifiex/fw.h
+++ b/drivers/net/wireless/mwifiex/fw.h
@@ -181,6 +181,7 @@ enum MWIFIEX_802_11_PRIVACY_FILTER {
 #define MWIFIEX_TX_DATA_BUF_SIZE_8K        8192
 
 #define ISSUPP_11NENABLED(FwCapInfo) (FwCapInfo & BIT(11))
+#define ISSUPP_TDLS_ENABLED(FwCapInfo) (FwCapInfo & BIT(14))
 
 #define MWIFIEX_DEF_HT_CAP	(IEEE80211_HT_CAP_DSSSCCK40 | \
 				 (1 << IEEE80211_HT_CAP_RX_STBC_SHIFT) | \
@@ -497,6 +498,7 @@ struct mwifiex_ie_types_data {
 
 #define MWIFIEX_TxPD_POWER_MGMT_NULL_PACKET 0x01
 #define MWIFIEX_TxPD_POWER_MGMT_LAST_PACKET 0x08
+#define MWIFIEX_TXPD_FLAGS_TDLS_PACKET      0x10
 
 struct txpd {
 	u8 bss_type;
diff --git a/drivers/net/wireless/mwifiex/ioctl.h b/drivers/net/wireless/mwifiex/ioctl.h
index 48f15906515d..fe122742b010 100644
--- a/drivers/net/wireless/mwifiex/ioctl.h
+++ b/drivers/net/wireless/mwifiex/ioctl.h
@@ -85,6 +85,10 @@ struct wep_key {
 #define BAND_CONFIG_A           0x01
 #define MWIFIEX_SUPPORTED_RATES                 14
 #define MWIFIEX_SUPPORTED_RATES_EXT             32
+#define MWIFIEX_TDLS_SUPPORTED_RATES		8
+#define MWIFIEX_TDLS_DEF_QOS_CAPAB		0xf
+#define MWIFIEX_PRIO_BK				2
+#define MWIFIEX_PRIO_VI				5
 
 struct mwifiex_uap_bss_param {
 	u8 channel;
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index 2114475f03c3..54197847d494 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -262,6 +262,16 @@ struct ieee_types_generic {
 	u8 data[IEEE_MAX_IE_SIZE - sizeof(struct ieee_types_header)];
 } __packed;
 
+struct ieee_types_bss_co_2040 {
+	struct ieee_types_header ieee_hdr;
+	u8 bss_2040co;
+} __packed;
+
+struct ieee_types_extcap {
+	struct ieee_types_header ieee_hdr;
+	u8 ext_capab[8];
+} __packed;
+
 struct mwifiex_bssdescriptor {
 	u8 mac_address[ETH_ALEN];
 	struct cfg80211_ssid ssid;
@@ -1176,6 +1186,14 @@ struct mwifiex_sta_node *
 mwifiex_add_sta_entry(struct mwifiex_private *priv, u8 *mac);
 struct mwifiex_sta_node *
 mwifiex_get_sta_entry(struct mwifiex_private *priv, u8 *mac);
+int mwifiex_send_tdls_data_frame(struct mwifiex_private *priv, u8 *peer,
+				 u8 action_code, u8 dialog_token,
+				 u16 status_code, const u8 *extra_ies,
+				 size_t extra_ies_len);
+int mwifiex_send_tdls_action_frame(struct mwifiex_private *priv,
+				 u8 *peer, u8 action_code, u8 dialog_token,
+				 u16 status_code, const u8 *extra_ies,
+				 size_t extra_ies_len);
 
 #ifdef CONFIG_DEBUG_FS
 void mwifiex_debugfs_init(void);
diff --git a/drivers/net/wireless/mwifiex/sta_tx.c b/drivers/net/wireless/mwifiex/sta_tx.c
index 354d64c9606f..1236a5de7bca 100644
--- a/drivers/net/wireless/mwifiex/sta_tx.c
+++ b/drivers/net/wireless/mwifiex/sta_tx.c
@@ -95,6 +95,9 @@ void *mwifiex_process_sta_txpd(struct mwifiex_private *priv,
 		}
 	}
 
+	if (tx_info->flags & MWIFIEX_BUF_FLAG_TDLS_PKT)
+		local_tx_pd->flags |= MWIFIEX_TXPD_FLAGS_TDLS_PACKET;
+
 	/* Offset of actual data */
 	pkt_offset = sizeof(struct txpd) + pad;
 	if (pkt_type == PKT_TYPE_MGMT) {
diff --git a/drivers/net/wireless/mwifiex/tdls.c b/drivers/net/wireless/mwifiex/tdls.c
new file mode 100644
index 000000000000..73cd444a6d43
--- /dev/null
+++ b/drivers/net/wireless/mwifiex/tdls.c
@@ -0,0 +1,423 @@
+/* Marvell Wireless LAN device driver: TDLS handling
+ *
+ * Copyright (C) 2014, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License").  You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available on the worldwide web at
+ * http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED.  The License provides additional details about
+ * this warranty disclaimer.
+ */
+
+#include "main.h"
+
+/* This function appends rate TLV to scan config command. */
+static int
+mwifiex_tdls_append_rates_ie(struct mwifiex_private *priv,
+			     struct sk_buff *skb)
+{
+	u8 rates[MWIFIEX_SUPPORTED_RATES], *pos;
+	u16 rates_size, supp_rates_size, ext_rates_size;
+
+	memset(rates, 0, sizeof(rates));
+	rates_size = mwifiex_get_supported_rates(priv, rates);
+
+	supp_rates_size = min_t(u16, rates_size, MWIFIEX_TDLS_SUPPORTED_RATES);
+
+	if (skb_tailroom(skb) < rates_size + 4) {
+		dev_err(priv->adapter->dev,
+			"Insuffient space while adding rates\n");
+		return -ENOMEM;
+	}
+
+	pos = skb_put(skb, supp_rates_size + 2);
+	*pos++ = WLAN_EID_SUPP_RATES;
+	*pos++ = supp_rates_size;
+	memcpy(pos, rates, supp_rates_size);
+
+	if (rates_size > MWIFIEX_TDLS_SUPPORTED_RATES) {
+		ext_rates_size = rates_size - MWIFIEX_TDLS_SUPPORTED_RATES;
+		pos = skb_put(skb, ext_rates_size + 2);
+		*pos++ = WLAN_EID_EXT_SUPP_RATES;
+		*pos++ = ext_rates_size;
+		memcpy(pos, rates + MWIFIEX_TDLS_SUPPORTED_RATES,
+		       ext_rates_size);
+	}
+
+	return 0;
+}
+
+static void mwifiex_tdls_add_ext_capab(struct sk_buff *skb)
+{
+	struct ieee_types_extcap *extcap;
+
+	extcap = (void *)skb_put(skb, sizeof(struct ieee_types_extcap));
+	extcap->ieee_hdr.element_id = WLAN_EID_EXT_CAPABILITY;
+	extcap->ieee_hdr.len = 8;
+	memset(extcap->ext_capab, 0, 8);
+	extcap->ext_capab[4] |= WLAN_EXT_CAPA5_TDLS_ENABLED;
+}
+
+static void mwifiex_tdls_add_qos_capab(struct sk_buff *skb)
+{
+	u8 *pos = (void *)skb_put(skb, 3);
+
+	*pos++ = WLAN_EID_QOS_CAPA;
+	*pos++ = 1;
+	*pos++ = MWIFIEX_TDLS_DEF_QOS_CAPAB;
+}
+
+static int mwifiex_prep_tdls_encap_data(struct mwifiex_private *priv,
+			     u8 *peer, u8 action_code, u8 dialog_token,
+			     u16 status_code, struct sk_buff *skb)
+{
+	struct ieee80211_tdls_data *tf;
+	int ret;
+	u16 capab;
+	struct ieee80211_ht_cap *ht_cap;
+	u8 radio, *pos;
+
+	capab = priv->curr_bss_params.bss_descriptor.cap_info_bitmap;
+
+	tf = (void *)skb_put(skb, offsetof(struct ieee80211_tdls_data, u));
+	memcpy(tf->da, peer, ETH_ALEN);
+	memcpy(tf->sa, priv->curr_addr, ETH_ALEN);
+	tf->ether_type = cpu_to_be16(ETH_P_TDLS);
+	tf->payload_type = WLAN_TDLS_SNAP_RFTYPE;
+
+	switch (action_code) {
+	case WLAN_TDLS_SETUP_REQUEST:
+		tf->category = WLAN_CATEGORY_TDLS;
+		tf->action_code = WLAN_TDLS_SETUP_REQUEST;
+		skb_put(skb, sizeof(tf->u.setup_req));
+		tf->u.setup_req.dialog_token = dialog_token;
+		tf->u.setup_req.capability = cpu_to_le16(capab);
+		ret = mwifiex_tdls_append_rates_ie(priv, skb);
+		if (ret) {
+			dev_kfree_skb_any(skb);
+			return ret;
+		}
+
+		pos = (void *)skb_put(skb, sizeof(struct ieee80211_ht_cap) + 2);
+		*pos++ = WLAN_EID_HT_CAPABILITY;
+		*pos++ = sizeof(struct ieee80211_ht_cap);
+		ht_cap = (void *)pos;
+		radio = mwifiex_band_to_radio_type(priv->curr_bss_params.band);
+		ret = mwifiex_fill_cap_info(priv, radio, ht_cap);
+		if (ret) {
+			dev_kfree_skb_any(skb);
+			return ret;
+		}
+
+		mwifiex_tdls_add_ext_capab(skb);
+		mwifiex_tdls_add_qos_capab(skb);
+		break;
+
+	case WLAN_TDLS_SETUP_RESPONSE:
+		tf->category = WLAN_CATEGORY_TDLS;
+		tf->action_code = WLAN_TDLS_SETUP_RESPONSE;
+		skb_put(skb, sizeof(tf->u.setup_resp));
+		tf->u.setup_resp.status_code = cpu_to_le16(status_code);
+		tf->u.setup_resp.dialog_token = dialog_token;
+		tf->u.setup_resp.capability = cpu_to_le16(capab);
+		ret = mwifiex_tdls_append_rates_ie(priv, skb);
+		if (ret) {
+			dev_kfree_skb_any(skb);
+			return ret;
+		}
+
+		pos = (void *)skb_put(skb, sizeof(struct ieee80211_ht_cap) + 2);
+		*pos++ = WLAN_EID_HT_CAPABILITY;
+		*pos++ = sizeof(struct ieee80211_ht_cap);
+		ht_cap = (void *)pos;
+		radio = mwifiex_band_to_radio_type(priv->curr_bss_params.band);
+		ret = mwifiex_fill_cap_info(priv, radio, ht_cap);
+		if (ret) {
+			dev_kfree_skb_any(skb);
+			return ret;
+		}
+
+		mwifiex_tdls_add_ext_capab(skb);
+		mwifiex_tdls_add_qos_capab(skb);
+		break;
+
+	case WLAN_TDLS_SETUP_CONFIRM:
+		tf->category = WLAN_CATEGORY_TDLS;
+		tf->action_code = WLAN_TDLS_SETUP_CONFIRM;
+		skb_put(skb, sizeof(tf->u.setup_cfm));
+		tf->u.setup_cfm.status_code = cpu_to_le16(status_code);
+		tf->u.setup_cfm.dialog_token = dialog_token;
+		break;
+
+	case WLAN_TDLS_TEARDOWN:
+		tf->category = WLAN_CATEGORY_TDLS;
+		tf->action_code = WLAN_TDLS_TEARDOWN;
+		skb_put(skb, sizeof(tf->u.teardown));
+		tf->u.teardown.reason_code = cpu_to_le16(status_code);
+		break;
+
+	case WLAN_TDLS_DISCOVERY_REQUEST:
+		tf->category = WLAN_CATEGORY_TDLS;
+		tf->action_code = WLAN_TDLS_DISCOVERY_REQUEST;
+		skb_put(skb, sizeof(tf->u.discover_req));
+		tf->u.discover_req.dialog_token = dialog_token;
+		break;
+	default:
+		dev_err(priv->adapter->dev, "Unknown TDLS frame type.\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void
+mwifiex_tdls_add_link_ie(struct sk_buff *skb, u8 *src_addr, u8 *peer, u8 *bssid)
+{
+	struct ieee80211_tdls_lnkie *lnkid;
+
+	lnkid = (void *)skb_put(skb, sizeof(struct ieee80211_tdls_lnkie));
+	lnkid->ie_type = WLAN_EID_LINK_ID;
+	lnkid->ie_len = sizeof(struct ieee80211_tdls_lnkie) -
+			sizeof(struct ieee_types_header);
+
+	memcpy(lnkid->bssid, bssid, ETH_ALEN);
+	memcpy(lnkid->init_sta, src_addr, ETH_ALEN);
+	memcpy(lnkid->resp_sta, peer, ETH_ALEN);
+}
+
+int mwifiex_send_tdls_data_frame(struct mwifiex_private *priv,
+				 u8 *peer, u8 action_code, u8 dialog_token,
+				 u16 status_code, const u8 *extra_ies,
+				 size_t extra_ies_len)
+{
+	struct sk_buff *skb;
+	struct mwifiex_txinfo *tx_info;
+	struct timeval tv;
+	int ret;
+	u16 skb_len;
+
+	skb_len = MWIFIEX_MIN_DATA_HEADER_LEN +
+		  max(sizeof(struct ieee80211_mgmt),
+		      sizeof(struct ieee80211_tdls_data)) +
+		  MWIFIEX_MGMT_FRAME_HEADER_SIZE +
+		  MWIFIEX_SUPPORTED_RATES +
+		  3 + /* Qos Info */
+		  sizeof(struct ieee_types_extcap) +
+		  sizeof(struct ieee80211_ht_cap) +
+		  sizeof(struct ieee_types_bss_co_2040) +
+		  sizeof(struct ieee80211_ht_operation) +
+		  sizeof(struct ieee80211_tdls_lnkie) +
+		  extra_ies_len;
+
+	skb = dev_alloc_skb(skb_len);
+	if (!skb) {
+		dev_err(priv->adapter->dev,
+			"allocate skb failed for management frame\n");
+		return -ENOMEM;
+	}
+	skb_reserve(skb, MWIFIEX_MIN_DATA_HEADER_LEN);
+
+	switch (action_code) {
+	case WLAN_TDLS_SETUP_REQUEST:
+	case WLAN_TDLS_SETUP_CONFIRM:
+	case WLAN_TDLS_TEARDOWN:
+	case WLAN_TDLS_DISCOVERY_REQUEST:
+		ret = mwifiex_prep_tdls_encap_data(priv, peer, action_code,
+						   dialog_token, status_code,
+						   skb);
+		if (ret) {
+			dev_kfree_skb_any(skb);
+			return ret;
+		}
+		if (extra_ies_len)
+			memcpy(skb_put(skb, extra_ies_len), extra_ies,
+			       extra_ies_len);
+		mwifiex_tdls_add_link_ie(skb, priv->curr_addr, peer,
+					 priv->cfg_bssid);
+		break;
+	case WLAN_TDLS_SETUP_RESPONSE:
+		ret = mwifiex_prep_tdls_encap_data(priv, peer, action_code,
+						   dialog_token, status_code,
+						   skb);
+		if (ret) {
+			dev_kfree_skb_any(skb);
+			return ret;
+		}
+		if (extra_ies_len)
+			memcpy(skb_put(skb, extra_ies_len), extra_ies,
+			       extra_ies_len);
+		mwifiex_tdls_add_link_ie(skb, peer, priv->curr_addr,
+					 priv->cfg_bssid);
+		break;
+	}
+
+	switch (action_code) {
+	case WLAN_TDLS_SETUP_REQUEST:
+	case WLAN_TDLS_SETUP_RESPONSE:
+		skb->priority = MWIFIEX_PRIO_BK;
+		break;
+	default:
+		skb->priority = MWIFIEX_PRIO_VI;
+		break;
+	}
+
+	tx_info = MWIFIEX_SKB_TXCB(skb);
+	tx_info->bss_num = priv->bss_num;
+	tx_info->bss_type = priv->bss_type;
+
+	do_gettimeofday(&tv);
+	skb->tstamp = timeval_to_ktime(tv);
+	mwifiex_queue_tx_pkt(priv, skb);
+
+	return 0;
+}
+
+static int
+mwifiex_construct_tdls_action_frame(struct mwifiex_private *priv, u8 *peer,
+				    u8 action_code, u8 dialog_token,
+				    u16 status_code, struct sk_buff *skb)
+{
+	struct ieee80211_mgmt *mgmt;
+	u8 bc_addr[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
+	int ret;
+	u16 capab;
+	struct ieee80211_ht_cap *ht_cap;
+	u8 radio, *pos;
+
+	capab = priv->curr_bss_params.bss_descriptor.cap_info_bitmap;
+
+	mgmt = (void *)skb_put(skb, offsetof(struct ieee80211_mgmt, u));
+
+	memset(mgmt, 0, 24);
+	memcpy(mgmt->da, peer, ETH_ALEN);
+	memcpy(mgmt->sa, priv->curr_addr, ETH_ALEN);
+	memcpy(mgmt->bssid, priv->cfg_bssid, ETH_ALEN);
+	mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
+					  IEEE80211_STYPE_ACTION);
+
+	/* add address 4 */
+	pos = skb_put(skb, ETH_ALEN);
+
+	switch (action_code) {
+	case WLAN_PUB_ACTION_TDLS_DISCOVER_RES:
+		skb_put(skb, sizeof(mgmt->u.action.u.tdls_discover_resp) + 1);
+		mgmt->u.action.category = WLAN_CATEGORY_PUBLIC;
+		mgmt->u.action.u.tdls_discover_resp.action_code =
+					      WLAN_PUB_ACTION_TDLS_DISCOVER_RES;
+		mgmt->u.action.u.tdls_discover_resp.dialog_token =
+								   dialog_token;
+		mgmt->u.action.u.tdls_discover_resp.capability =
+							     cpu_to_le16(capab);
+		/* move back for addr4 */
+		memmove(pos + ETH_ALEN, &mgmt->u.action.category,
+			sizeof(mgmt->u.action.u.tdls_discover_resp));
+		/* init address 4 */
+		memcpy(pos, bc_addr, ETH_ALEN);
+
+		ret = mwifiex_tdls_append_rates_ie(priv, skb);
+		if (ret) {
+			dev_kfree_skb_any(skb);
+			return ret;
+		}
+
+		pos = (void *)skb_put(skb, sizeof(struct ieee80211_ht_cap) + 2);
+		*pos++ = WLAN_EID_HT_CAPABILITY;
+		*pos++ = sizeof(struct ieee80211_ht_cap);
+		ht_cap = (void *)pos;
+		radio = mwifiex_band_to_radio_type(priv->curr_bss_params.band);
+		ret = mwifiex_fill_cap_info(priv, radio, ht_cap);
+		if (ret) {
+			dev_kfree_skb_any(skb);
+			return ret;
+		}
+
+		mwifiex_tdls_add_ext_capab(skb);
+		mwifiex_tdls_add_qos_capab(skb);
+		break;
+	default:
+		dev_err(priv->adapter->dev, "Unknown TDLS action frame type\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+int mwifiex_send_tdls_action_frame(struct mwifiex_private *priv,
+				 u8 *peer, u8 action_code, u8 dialog_token,
+				 u16 status_code, const u8 *extra_ies,
+				 size_t extra_ies_len)
+{
+	struct sk_buff *skb;
+	struct mwifiex_txinfo *tx_info;
+	struct timeval tv;
+	u8 *pos;
+	u32 pkt_type, tx_control;
+	u16 pkt_len, skb_len;
+
+	skb_len = MWIFIEX_MIN_DATA_HEADER_LEN +
+		  max(sizeof(struct ieee80211_mgmt),
+		      sizeof(struct ieee80211_tdls_data)) +
+		  MWIFIEX_MGMT_FRAME_HEADER_SIZE +
+		  MWIFIEX_SUPPORTED_RATES +
+		  sizeof(struct ieee_types_extcap) +
+		  sizeof(struct ieee80211_ht_cap) +
+		  sizeof(struct ieee_types_bss_co_2040) +
+		  sizeof(struct ieee80211_ht_operation) +
+		  sizeof(struct ieee80211_tdls_lnkie) +
+		  extra_ies_len +
+		  3 + /* Qos Info */
+		  ETH_ALEN; /* Address4 */
+
+	skb = dev_alloc_skb(skb_len);
+	if (!skb) {
+		dev_err(priv->adapter->dev,
+			"allocate skb failed for management frame\n");
+		return -ENOMEM;
+	}
+
+	skb_reserve(skb, MWIFIEX_MIN_DATA_HEADER_LEN);
+
+	pkt_type = PKT_TYPE_MGMT;
+	tx_control = 0;
+	pos = skb_put(skb, MWIFIEX_MGMT_FRAME_HEADER_SIZE + sizeof(pkt_len));
+	memset(pos, 0, MWIFIEX_MGMT_FRAME_HEADER_SIZE + sizeof(pkt_len));
+	memcpy(pos, &pkt_type, sizeof(pkt_type));
+	memcpy(pos + sizeof(pkt_type), &tx_control, sizeof(tx_control));
+
+	if (mwifiex_construct_tdls_action_frame(priv, peer, action_code,
+						dialog_token, status_code,
+						skb)) {
+		dev_kfree_skb_any(skb);
+		return -EINVAL;
+	}
+
+	if (extra_ies_len)
+		memcpy(skb_put(skb, extra_ies_len), extra_ies, extra_ies_len);
+
+	/* the TDLS link IE is always added last we are the responder */
+
+	mwifiex_tdls_add_link_ie(skb, peer, priv->curr_addr,
+				 priv->cfg_bssid);
+
+	skb->priority = MWIFIEX_PRIO_VI;
+
+	tx_info = MWIFIEX_SKB_TXCB(skb);
+	tx_info->bss_num = priv->bss_num;
+	tx_info->bss_type = priv->bss_type;
+	tx_info->flags |= MWIFIEX_BUF_FLAG_TDLS_PKT;
+
+	pkt_len = skb->len - MWIFIEX_MGMT_FRAME_HEADER_SIZE - sizeof(pkt_len);
+	memcpy(skb->data + MWIFIEX_MGMT_FRAME_HEADER_SIZE, &pkt_len,
+	       sizeof(pkt_len));
+	do_gettimeofday(&tv);
+	skb->tstamp = timeval_to_ktime(tv);
+	mwifiex_queue_tx_pkt(priv, skb);
+
+	return 0;
+}
-- 
cgit v1.2.2


From 5f2caaf32bc64c200007611505ce2453f4862276 Mon Sep 17 00:00:00 2001
From: Avinash Patil <patila@marvell.com>
Date: Fri, 7 Feb 2014 16:27:33 -0800
Subject: mwifiex: parse TDLS action frames during RX

This patch adds support for parsing TDLS action frames during
station receive handler.
Peer station capabilities are stored into station node.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/decl.h   |   8 +++
 drivers/net/wireless/mwifiex/main.h   |  19 +++++-
 drivers/net/wireless/mwifiex/sta_rx.c |  13 +++-
 drivers/net/wireless/mwifiex/tdls.c   | 119 ++++++++++++++++++++++++++++++++++
 drivers/net/wireless/mwifiex/wmm.c    |   5 +-
 drivers/net/wireless/mwifiex/wmm.h    |   3 +
 6 files changed, 160 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/decl.h b/drivers/net/wireless/mwifiex/decl.h
index c709f1c25b97..efcd1b8b9a26 100644
--- a/drivers/net/wireless/mwifiex/decl.h
+++ b/drivers/net/wireless/mwifiex/decl.h
@@ -93,6 +93,14 @@ enum mwifiex_bss_role {
 	MWIFIEX_BSS_ROLE_ANY = 0xff,
 };
 
+enum mwifiex_tdls_status {
+	TDLS_NOT_SETUP = 0,
+	TDLS_SETUP_INPROGRESS,
+	TDLS_SETUP_COMPLETE,
+	TDLS_SETUP_FAILURE,
+	TDLS_LINK_TEARDOWN,
+};
+
 #define BSS_ROLE_BIT_MASK    BIT(0)
 
 #define GET_BSS_ROLE(priv)   ((priv)->bss_role & BSS_ROLE_BIT_MASK)
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index 54197847d494..3b0be45f833c 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -594,8 +594,20 @@ struct mwifiex_bss_priv {
 	u64 fw_tsf;
 };
 
-/* This is AP specific structure which stores information
- * about associated STA
+struct mwifiex_tdls_capab {
+	__le16 capab;
+	u8 rates[32];
+	u8 rates_len;
+	u8 qos_info;
+	u8 coex_2040;
+	struct ieee80211_ht_cap ht_capb;
+	struct ieee80211_ht_operation ht_oper;
+	struct ieee_types_extcap extcap;
+	struct ieee_types_generic rsn_ie;
+};
+
+/* This is AP/TDLS specific structure which stores information
+ * about associated/peer STA
  */
 struct mwifiex_sta_node {
 	struct list_head list;
@@ -605,6 +617,7 @@ struct mwifiex_sta_node {
 	u8 ampdu_sta[MAX_NUM_TID];
 	u16 rx_seq[MAX_NUM_TID];
 	u16 max_amsdu;
+	struct mwifiex_tdls_capab tdls_cap;
 };
 
 struct mwifiex_if_ops {
@@ -1194,6 +1207,8 @@ int mwifiex_send_tdls_action_frame(struct mwifiex_private *priv,
 				 u8 *peer, u8 action_code, u8 dialog_token,
 				 u16 status_code, const u8 *extra_ies,
 				 size_t extra_ies_len);
+void mwifiex_process_tdls_action_frame(struct mwifiex_private *priv,
+				       u8 *buf, int len);
 
 #ifdef CONFIG_DEBUG_FS
 void mwifiex_debugfs_init(void);
diff --git a/drivers/net/wireless/mwifiex/sta_rx.c b/drivers/net/wireless/mwifiex/sta_rx.c
index 4651d676df38..b6aa958bd6e4 100644
--- a/drivers/net/wireless/mwifiex/sta_rx.c
+++ b/drivers/net/wireless/mwifiex/sta_rx.c
@@ -88,11 +88,14 @@ int mwifiex_process_rx_packet(struct mwifiex_private *priv,
 	struct rxpd *local_rx_pd;
 	int hdr_chop;
 	struct ethhdr *eth;
+	u16 rx_pkt_off, rx_pkt_len;
+	u8 *offset;
 
 	local_rx_pd = (struct rxpd *) (skb->data);
 
-	rx_pkt_hdr = (void *)local_rx_pd +
-		     le16_to_cpu(local_rx_pd->rx_pkt_offset);
+	rx_pkt_off = le16_to_cpu(local_rx_pd->rx_pkt_offset);
+	rx_pkt_len = le16_to_cpu(local_rx_pd->rx_pkt_length);
+	rx_pkt_hdr = (void *)local_rx_pd + rx_pkt_off;
 
 	if ((!memcmp(&rx_pkt_hdr->rfc1042_hdr, bridge_tunnel_header,
 		     sizeof(bridge_tunnel_header))) ||
@@ -142,6 +145,12 @@ int mwifiex_process_rx_packet(struct mwifiex_private *priv,
 		return 0;
 	}
 
+	if (ISSUPP_TDLS_ENABLED(priv->adapter->fw_cap_info) &&
+	    ntohs(rx_pkt_hdr->eth803_hdr.h_proto) == ETH_P_TDLS) {
+		offset = (u8 *)local_rx_pd + rx_pkt_off;
+		mwifiex_process_tdls_action_frame(priv, offset, rx_pkt_len);
+	}
+
 	priv->rxpd_rate = local_rx_pd->rx_rate;
 
 	priv->rxpd_htinfo = local_rx_pd->ht_info;
diff --git a/drivers/net/wireless/mwifiex/tdls.c b/drivers/net/wireless/mwifiex/tdls.c
index 73cd444a6d43..ba54037a324c 100644
--- a/drivers/net/wireless/mwifiex/tdls.c
+++ b/drivers/net/wireless/mwifiex/tdls.c
@@ -16,6 +16,11 @@
  */
 
 #include "main.h"
+#include "wmm.h"
+
+#define TDLS_REQ_FIX_LEN      6
+#define TDLS_RESP_FIX_LEN     8
+#define TDLS_CONFIRM_FIX_LEN  6
 
 /* This function appends rate TLV to scan config command. */
 static int
@@ -421,3 +426,117 @@ int mwifiex_send_tdls_action_frame(struct mwifiex_private *priv,
 
 	return 0;
 }
+
+/* This function process tdls action frame from peer.
+ * Peer capabilities are stored into station node structure.
+ */
+void mwifiex_process_tdls_action_frame(struct mwifiex_private *priv,
+				       u8 *buf, int len)
+{
+	struct mwifiex_sta_node *sta_ptr;
+	u8 *peer, *pos, *end;
+	u8 i, action, basic;
+	int ie_len = 0;
+
+	if (len < (sizeof(struct ethhdr) + 3))
+		return;
+	if (*(u8 *)(buf + sizeof(struct ethhdr)) != WLAN_TDLS_SNAP_RFTYPE)
+		return;
+	if (*(u8 *)(buf + sizeof(struct ethhdr) + 1) != WLAN_CATEGORY_TDLS)
+		return;
+
+	peer = buf + ETH_ALEN;
+	action = *(u8 *)(buf + sizeof(struct ethhdr) + 2);
+
+	/* just handle TDLS setup request/response/confirm */
+	if (action > WLAN_TDLS_SETUP_CONFIRM)
+		return;
+
+	dev_dbg(priv->adapter->dev,
+		"rx:tdls action: peer=%pM, action=%d\n", peer, action);
+
+	sta_ptr = mwifiex_add_sta_entry(priv, peer);
+	if (!sta_ptr)
+		return;
+
+	switch (action) {
+	case WLAN_TDLS_SETUP_REQUEST:
+		if (len < (sizeof(struct ethhdr) + TDLS_REQ_FIX_LEN))
+			return;
+
+		pos = buf + sizeof(struct ethhdr) + 4;
+		/* payload 1+ category 1 + action 1 + dialog 1 */
+		sta_ptr->tdls_cap.capab = cpu_to_le16(*(u16 *)pos);
+		ie_len = len - sizeof(struct ethhdr) - TDLS_REQ_FIX_LEN;
+		pos += 2;
+		break;
+
+	case WLAN_TDLS_SETUP_RESPONSE:
+		if (len < (sizeof(struct ethhdr) + TDLS_RESP_FIX_LEN))
+			return;
+		/* payload 1+ category 1 + action 1 + dialog 1 + status code 2*/
+		pos = buf + sizeof(struct ethhdr) + 6;
+		sta_ptr->tdls_cap.capab = cpu_to_le16(*(u16 *)pos);
+		ie_len = len - sizeof(struct ethhdr) - TDLS_RESP_FIX_LEN;
+		pos += 2;
+		break;
+
+	case WLAN_TDLS_SETUP_CONFIRM:
+		if (len < (sizeof(struct ethhdr) + TDLS_CONFIRM_FIX_LEN))
+			return;
+		pos = buf + sizeof(struct ethhdr) + TDLS_CONFIRM_FIX_LEN;
+		ie_len = len - sizeof(struct ethhdr) - TDLS_CONFIRM_FIX_LEN;
+		break;
+	default:
+		dev_warn(priv->adapter->dev, "Unknown TDLS frame type.\n");
+		return;
+	}
+
+	for (end = pos + ie_len; pos + 1 < end; pos += 2 + pos[1]) {
+		if (pos + 2 + pos[1] > end)
+			break;
+
+		switch (*pos) {
+		case WLAN_EID_SUPP_RATES:
+			sta_ptr->tdls_cap.rates_len = pos[1];
+			for (i = 0; i < pos[1]; i++)
+				sta_ptr->tdls_cap.rates[i] = pos[i + 2];
+			break;
+
+		case WLAN_EID_EXT_SUPP_RATES:
+			basic = sta_ptr->tdls_cap.rates_len;
+			for (i = 0; i < pos[1]; i++)
+				sta_ptr->tdls_cap.rates[basic + i] = pos[i + 2];
+			sta_ptr->tdls_cap.rates_len += pos[1];
+			break;
+		case WLAN_EID_HT_CAPABILITY:
+			memcpy((u8 *)&sta_ptr->tdls_cap.ht_capb, pos,
+			       sizeof(struct ieee80211_ht_cap));
+			sta_ptr->is_11n_enabled = 1;
+			break;
+		case WLAN_EID_HT_OPERATION:
+			memcpy(&sta_ptr->tdls_cap.ht_oper, pos,
+			       sizeof(struct ieee80211_ht_operation));
+			break;
+		case WLAN_EID_BSS_COEX_2040:
+			sta_ptr->tdls_cap.coex_2040 = pos[2];
+			break;
+		case WLAN_EID_EXT_CAPABILITY:
+			memcpy((u8 *)&sta_ptr->tdls_cap.extcap, pos,
+			       sizeof(struct ieee_types_header) +
+			       min_t(u8, pos[1], 8));
+			break;
+		case WLAN_EID_RSN:
+			memcpy((u8 *)&sta_ptr->tdls_cap.rsn_ie, pos,
+			       sizeof(struct ieee_types_header) + pos[1]);
+			break;
+		case WLAN_EID_QOS_CAPA:
+			sta_ptr->tdls_cap.qos_info = pos[2];
+			break;
+		default:
+			break;
+		}
+	}
+
+	return;
+}
diff --git a/drivers/net/wireless/mwifiex/wmm.c b/drivers/net/wireless/mwifiex/wmm.c
index 2999c3b1e112..557d36318d1d 100644
--- a/drivers/net/wireless/mwifiex/wmm.c
+++ b/drivers/net/wireless/mwifiex/wmm.c
@@ -374,8 +374,7 @@ mwifiex_wmm_convert_tos_to_ac(struct mwifiex_adapter *adapter, u32 tos)
  * AP is disabled (due to call admission control (ACM bit). Mapping
  * of TID to AC is taken care of internally.
  */
-static u8
-mwifiex_wmm_downgrade_tid(struct mwifiex_private *priv, u32 tid)
+u8 mwifiex_wmm_downgrade_tid(struct mwifiex_private *priv, u32 tid)
 {
 	enum mwifiex_wmm_ac_e ac, ac_down;
 	u8 new_tid;
@@ -578,7 +577,7 @@ mwifiex_wmm_get_ralist_node(struct mwifiex_private *priv, u8 tid,
  * If no such node is found, a new node is added first and then
  * retrieved.
  */
-static struct mwifiex_ra_list_tbl *
+struct mwifiex_ra_list_tbl *
 mwifiex_wmm_get_queue_raptr(struct mwifiex_private *priv, u8 tid, u8 *ra_addr)
 {
 	struct mwifiex_ra_list_tbl *ra_list;
diff --git a/drivers/net/wireless/mwifiex/wmm.h b/drivers/net/wireless/mwifiex/wmm.h
index d4e607395da7..83e42083ebff 100644
--- a/drivers/net/wireless/mwifiex/wmm.h
+++ b/drivers/net/wireless/mwifiex/wmm.h
@@ -122,5 +122,8 @@ void mwifiex_wmm_setup_queue_priorities(struct mwifiex_private *priv,
 void mwifiex_wmm_setup_ac_downgrade(struct mwifiex_private *priv);
 int mwifiex_ret_wmm_get_status(struct mwifiex_private *priv,
 			       const struct host_cmd_ds_command *resp);
+struct mwifiex_ra_list_tbl *
+mwifiex_wmm_get_queue_raptr(struct mwifiex_private *priv, u8 tid, u8 *ra_addr);
+u8 mwifiex_wmm_downgrade_tid(struct mwifiex_private *priv, u32 tid);
 
 #endif /* !_MWIFIEX_WMM_H_ */
-- 
cgit v1.2.2


From 429d90d2212b561859767a74e3bb855f32b4600d Mon Sep 17 00:00:00 2001
From: Avinash Patil <patila@marvell.com>
Date: Fri, 7 Feb 2014 16:27:34 -0800
Subject: mwifiex: add cfg80211 tdls_oper handler support

This patch adds cfg80211 handler tdls_oper handler support to
mwifiex. Upon enable link, driver sets status as TDLS status as
setup complete and also sets AMSDU size, AMPDU params for direct
link. Upon disable link, driver issues command to FW to delete
this link in FW.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/cfg80211.c    | 49 +++++++++++++++
 drivers/net/wireless/mwifiex/decl.h        | 14 +++++
 drivers/net/wireless/mwifiex/fw.h          | 12 ++++
 drivers/net/wireless/mwifiex/ioctl.h       | 12 ++++
 drivers/net/wireless/mwifiex/main.h        |  2 +
 drivers/net/wireless/mwifiex/sta_cmd.c     | 32 ++++++++++
 drivers/net/wireless/mwifiex/sta_cmdresp.c | 28 +++++++++
 drivers/net/wireless/mwifiex/tdls.c        | 97 ++++++++++++++++++++++++++++++
 8 files changed, 246 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index 2968af273ef9..88cff9ca5577 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -2669,6 +2669,54 @@ mwifiex_cfg80211_tdls_mgmt(struct wiphy *wiphy, struct net_device *dev,
 	return ret;
 }
 
+static int
+mwifiex_cfg80211_tdls_oper(struct wiphy *wiphy, struct net_device *dev,
+			   u8 *peer, enum nl80211_tdls_operation action)
+{
+	struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
+
+	if (!(wiphy->flags & WIPHY_FLAG_SUPPORTS_TDLS) ||
+	    !(wiphy->flags & WIPHY_FLAG_TDLS_EXTERNAL_SETUP))
+		return -ENOTSUPP;
+
+	/* make sure we are in station mode and connected */
+	if (!(priv->bss_type == MWIFIEX_BSS_TYPE_STA && priv->media_connected))
+		return -ENOTSUPP;
+
+	dev_dbg(priv->adapter->dev,
+		"TDLS peer=%pM, oper=%d\n", peer, action);
+
+	switch (action) {
+	case NL80211_TDLS_ENABLE_LINK:
+		action = MWIFIEX_TDLS_ENABLE_LINK;
+		break;
+	case NL80211_TDLS_DISABLE_LINK:
+		action = MWIFIEX_TDLS_DISABLE_LINK;
+		break;
+	case NL80211_TDLS_TEARDOWN:
+		/* shouldn't happen!*/
+		dev_warn(priv->adapter->dev,
+			 "tdls_oper: teardown from driver not supported\n");
+		return -EINVAL;
+	case NL80211_TDLS_SETUP:
+		/* shouldn't happen!*/
+		dev_warn(priv->adapter->dev,
+			 "tdls_oper: setup from driver not supported\n");
+		return -EINVAL;
+	case NL80211_TDLS_DISCOVERY_REQ:
+		/* shouldn't happen!*/
+		dev_warn(priv->adapter->dev,
+			 "tdls_oper: discovery from driver not supported\n");
+		return -EINVAL;
+	default:
+		dev_err(priv->adapter->dev,
+			"tdls_oper: operation not supported\n");
+		return -ENOTSUPP;
+	}
+
+	return mwifiex_tdls_oper(priv, peer, action);
+}
+
 /* station cfg80211 operations */
 static struct cfg80211_ops mwifiex_cfg80211_ops = {
 	.add_virtual_intf = mwifiex_add_virtual_intf,
@@ -2705,6 +2753,7 @@ static struct cfg80211_ops mwifiex_cfg80211_ops = {
 #endif
 	.set_coalesce = mwifiex_cfg80211_set_coalesce,
 	.tdls_mgmt = mwifiex_cfg80211_tdls_mgmt,
+	.tdls_oper = mwifiex_cfg80211_tdls_oper,
 };
 
 #ifdef CONFIG_PM
diff --git a/drivers/net/wireless/mwifiex/decl.h b/drivers/net/wireless/mwifiex/decl.h
index efcd1b8b9a26..e7b3e16e5d34 100644
--- a/drivers/net/wireless/mwifiex/decl.h
+++ b/drivers/net/wireless/mwifiex/decl.h
@@ -80,6 +80,11 @@
 #define MWIFIEX_BRIDGED_PKTS_THR_HIGH      1024
 #define MWIFIEX_BRIDGED_PKTS_THR_LOW        128
 
+#define MWIFIEX_TDLS_DISABLE_LINK             0x00
+#define MWIFIEX_TDLS_ENABLE_LINK              0x01
+#define MWIFIEX_TDLS_CREATE_LINK              0x02
+#define MWIFIEX_TDLS_CONFIG_LINK              0x03
+
 enum mwifiex_bss_type {
 	MWIFIEX_BSS_TYPE_STA = 0,
 	MWIFIEX_BSS_TYPE_UAP = 1,
@@ -101,6 +106,15 @@ enum mwifiex_tdls_status {
 	TDLS_LINK_TEARDOWN,
 };
 
+enum mwifiex_tdls_error_code {
+	TDLS_ERR_NO_ERROR = 0,
+	TDLS_ERR_INTERNAL_ERROR,
+	TDLS_ERR_MAX_LINKS_EST,
+	TDLS_ERR_LINK_EXISTS,
+	TDLS_ERR_LINK_NONEXISTENT,
+	TDLS_ERR_PEER_STA_UNREACHABLE = 25,
+};
+
 #define BSS_ROLE_BIT_MASK    BIT(0)
 
 #define GET_BSS_ROLE(priv)   ((priv)->bss_role & BSS_ROLE_BIT_MASK)
diff --git a/drivers/net/wireless/mwifiex/fw.h b/drivers/net/wireless/mwifiex/fw.h
index 416518a939b2..3180fc6b7c6d 100644
--- a/drivers/net/wireless/mwifiex/fw.h
+++ b/drivers/net/wireless/mwifiex/fw.h
@@ -316,6 +316,7 @@ enum MWIFIEX_802_11_PRIVACY_FILTER {
 #define HostCmd_CMD_MGMT_FRAME_REG                    0x010c
 #define HostCmd_CMD_REMAIN_ON_CHAN                    0x010d
 #define HostCmd_CMD_11AC_CFG			      0x0112
+#define HostCmd_CMD_TDLS_OPER                         0x0122
 
 #define PROTOCOL_NO_SECURITY        0x01
 #define PROTOCOL_STATIC_WEP         0x02
@@ -486,6 +487,10 @@ enum P2P_MODES {
 #define MWIFIEX_CRITERIA_UNICAST	BIT(1)
 #define MWIFIEX_CRITERIA_MULTICAST	BIT(3)
 
+#define ACT_TDLS_DELETE            0x00
+#define ACT_TDLS_CREATE            0x01
+#define ACT_TDLS_CONFIG            0x02
+
 struct mwifiex_ie_types_header {
 	__le16 type;
 	__le16 len;
@@ -1066,6 +1071,12 @@ struct host_cmd_ds_rf_ant_siso {
 	__le16 ant_mode;
 };
 
+struct host_cmd_ds_tdls_oper {
+	__le16 tdls_action;
+	__le16 reason;
+	u8 peer_mac[ETH_ALEN];
+} __packed;
+
 struct mwifiex_fixed_bcn_param {
 	__le64 timestamp;
 	__le16 beacon_period;
@@ -1726,6 +1737,7 @@ struct host_cmd_ds_command {
 		struct host_cmd_ds_sta_deauth sta_deauth;
 		struct host_cmd_11ac_vht_cfg vht_cfg;
 		struct host_cmd_ds_coalesce_cfg coalesce_cfg;
+		struct host_cmd_ds_tdls_oper tdls_oper;
 	} params;
 } __packed;
 
diff --git a/drivers/net/wireless/mwifiex/ioctl.h b/drivers/net/wireless/mwifiex/ioctl.h
index fe122742b010..6ed1e13d7b40 100644
--- a/drivers/net/wireless/mwifiex/ioctl.h
+++ b/drivers/net/wireless/mwifiex/ioctl.h
@@ -435,4 +435,16 @@ struct mwifiex_ds_coalesce_cfg {
 	struct mwifiex_coalesce_rule rule[MWIFIEX_COALESCE_MAX_RULES];
 };
 
+struct mwifiex_ds_tdls_oper {
+	u16 tdls_action;
+	u8 peer_mac[ETH_ALEN];
+	u16 capability;
+	u8 qos_info;
+	u8 *ext_capab;
+	u8 ext_capab_len;
+	u8 *supp_rates;
+	u8 supp_rates_len;
+	u8 *ht_capab;
+};
+
 #endif /* !_MWIFIEX_IOCTL_H_ */
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index 3b0be45f833c..d35c9950efba 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -617,6 +617,7 @@ struct mwifiex_sta_node {
 	u8 ampdu_sta[MAX_NUM_TID];
 	u16 rx_seq[MAX_NUM_TID];
 	u16 max_amsdu;
+	u8 tdls_status;
 	struct mwifiex_tdls_capab tdls_cap;
 };
 
@@ -1209,6 +1210,7 @@ int mwifiex_send_tdls_action_frame(struct mwifiex_private *priv,
 				 size_t extra_ies_len);
 void mwifiex_process_tdls_action_frame(struct mwifiex_private *priv,
 				       u8 *buf, int len);
+int mwifiex_tdls_oper(struct mwifiex_private *priv, u8 *peer, u8 action);
 
 #ifdef CONFIG_DEBUG_FS
 void mwifiex_debugfs_init(void);
diff --git a/drivers/net/wireless/mwifiex/sta_cmd.c b/drivers/net/wireless/mwifiex/sta_cmd.c
index 1b2991261538..4559f84e64b5 100644
--- a/drivers/net/wireless/mwifiex/sta_cmd.c
+++ b/drivers/net/wireless/mwifiex/sta_cmd.c
@@ -1280,6 +1280,35 @@ mwifiex_cmd_coalesce_cfg(struct mwifiex_private *priv,
 	return 0;
 }
 
+static int
+mwifiex_cmd_tdls_oper(struct mwifiex_private *priv,
+		      struct host_cmd_ds_command *cmd,
+		      void *data_buf)
+{
+	struct host_cmd_ds_tdls_oper *tdls_oper = &cmd->params.tdls_oper;
+	struct mwifiex_ds_tdls_oper *oper = data_buf;
+	struct mwifiex_sta_node *sta_ptr;
+
+	cmd->command = cpu_to_le16(HostCmd_CMD_TDLS_OPER);
+	cmd->size = cpu_to_le16(S_DS_GEN);
+
+	tdls_oper->reason = 0;
+	memcpy(tdls_oper->peer_mac, oper->peer_mac, ETH_ALEN);
+	sta_ptr = mwifiex_get_sta_entry(priv, oper->peer_mac);
+
+	switch (oper->tdls_action) {
+	case MWIFIEX_TDLS_DISABLE_LINK:
+		tdls_oper->tdls_action = cpu_to_le16(ACT_TDLS_DELETE);
+		break;
+	default:
+		dev_err(priv->adapter->dev, "Unknown TDLS operation\n");
+		return -ENOTSUPP;
+	}
+
+	le16_add_cpu(&cmd->size, sizeof(struct host_cmd_ds_tdls_oper));
+
+	return 0;
+}
 /*
  * This function prepares the commands before sending them to the firmware.
  *
@@ -1510,6 +1539,9 @@ int mwifiex_sta_prepare_cmd(struct mwifiex_private *priv, uint16_t cmd_no,
 		ret = mwifiex_cmd_coalesce_cfg(priv, cmd_ptr, cmd_action,
 					       data_buf);
 		break;
+	case HostCmd_CMD_TDLS_OPER:
+		ret = mwifiex_cmd_tdls_oper(priv, cmd_ptr, data_buf);
+		break;
 	default:
 		dev_err(priv->adapter->dev,
 			"PREP_CMD: unknown cmd- %#x\n", cmd_no);
diff --git a/drivers/net/wireless/mwifiex/sta_cmdresp.c b/drivers/net/wireless/mwifiex/sta_cmdresp.c
index 95e13589d2bd..cb17f490bc6d 100644
--- a/drivers/net/wireless/mwifiex/sta_cmdresp.c
+++ b/drivers/net/wireless/mwifiex/sta_cmdresp.c
@@ -801,7 +801,32 @@ static int mwifiex_ret_ibss_coalescing_status(struct mwifiex_private *priv,
 
 	return 0;
 }
+static int mwifiex_ret_tdls_oper(struct mwifiex_private *priv,
+				 struct host_cmd_ds_command *resp)
+{
+	struct host_cmd_ds_tdls_oper *cmd_tdls_oper = &resp->params.tdls_oper;
+	u16 reason = le16_to_cpu(cmd_tdls_oper->reason);
+	u16 action = le16_to_cpu(cmd_tdls_oper->tdls_action);
 
+	switch (action) {
+	case ACT_TDLS_DELETE:
+		if (reason)
+			dev_err(priv->adapter->dev,
+				"TDLS link delete for %pM failed: reason %d\n",
+				cmd_tdls_oper->peer_mac, reason);
+		else
+			dev_dbg(priv->adapter->dev,
+				"TDLS link config for %pM successful\n",
+				cmd_tdls_oper->peer_mac);
+		break;
+	default:
+		dev_err(priv->adapter->dev,
+			"Unknown TDLS command action respnse %d", action);
+		return -1;
+	}
+
+	return 0;
+}
 /*
  * This function handles the command response for subscribe event command.
  */
@@ -1004,6 +1029,9 @@ int mwifiex_process_sta_cmdresp(struct mwifiex_private *priv, u16 cmdresp_no,
 		break;
 	case HostCmd_CMD_COALESCE_CFG:
 		break;
+	case HostCmd_CMD_TDLS_OPER:
+		ret = mwifiex_ret_tdls_oper(priv, resp);
+		break;
 	default:
 		dev_err(adapter->dev, "CMD_RESP: unknown cmd response %#x\n",
 			resp->command);
diff --git a/drivers/net/wireless/mwifiex/tdls.c b/drivers/net/wireless/mwifiex/tdls.c
index ba54037a324c..7fead7bf768f 100644
--- a/drivers/net/wireless/mwifiex/tdls.c
+++ b/drivers/net/wireless/mwifiex/tdls.c
@@ -17,6 +17,8 @@
 
 #include "main.h"
 #include "wmm.h"
+#include "11n.h"
+#include "11n_rxreorder.h"
 
 #define TDLS_REQ_FIX_LEN      6
 #define TDLS_RESP_FIX_LEN     8
@@ -540,3 +542,98 @@ void mwifiex_process_tdls_action_frame(struct mwifiex_private *priv,
 
 	return;
 }
+
+static int
+mwifiex_tdls_process_disable_link(struct mwifiex_private *priv, u8 *peer)
+{
+	struct mwifiex_sta_node *sta_ptr;
+	struct mwifiex_ds_tdls_oper tdls_oper;
+	unsigned long flags;
+
+	memset(&tdls_oper, 0, sizeof(struct mwifiex_ds_tdls_oper));
+	sta_ptr = mwifiex_get_sta_entry(priv, peer);
+
+	if (sta_ptr) {
+		if (sta_ptr->is_11n_enabled) {
+			mwifiex_11n_cleanup_reorder_tbl(priv);
+			spin_lock_irqsave(&priv->wmm.ra_list_spinlock,
+					  flags);
+			mwifiex_11n_delete_all_tx_ba_stream_tbl(priv);
+			spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock,
+					       flags);
+		}
+		mwifiex_del_sta_entry(priv, peer);
+	}
+
+	memcpy(&tdls_oper.peer_mac, peer, ETH_ALEN);
+	tdls_oper.tdls_action = MWIFIEX_TDLS_DISABLE_LINK;
+	return mwifiex_send_cmd_sync(priv, HostCmd_CMD_TDLS_OPER,
+				     HostCmd_ACT_GEN_SET, 0, &tdls_oper);
+}
+
+static int
+mwifiex_tdls_process_enable_link(struct mwifiex_private *priv, u8 *peer)
+{
+	struct mwifiex_sta_node *sta_ptr;
+	struct ieee80211_mcs_info mcs;
+	unsigned long flags;
+	int i;
+
+	sta_ptr = mwifiex_get_sta_entry(priv, peer);
+
+	if (sta_ptr && (sta_ptr->tdls_status != TDLS_SETUP_FAILURE)) {
+		dev_dbg(priv->adapter->dev,
+			"tdls: enable link %pM success\n", peer);
+
+		sta_ptr->tdls_status = TDLS_SETUP_COMPLETE;
+
+		mcs = sta_ptr->tdls_cap.ht_capb.mcs;
+		if (mcs.rx_mask[0] != 0xff)
+			sta_ptr->is_11n_enabled = true;
+		if (sta_ptr->is_11n_enabled) {
+			if (le16_to_cpu(sta_ptr->tdls_cap.ht_capb.cap_info) &
+			    IEEE80211_HT_CAP_MAX_AMSDU)
+				sta_ptr->max_amsdu =
+					MWIFIEX_TX_DATA_BUF_SIZE_8K;
+			else
+				sta_ptr->max_amsdu =
+					MWIFIEX_TX_DATA_BUF_SIZE_4K;
+
+			for (i = 0; i < MAX_NUM_TID; i++)
+				sta_ptr->ampdu_sta[i] =
+					      priv->aggr_prio_tbl[i].ampdu_user;
+		} else {
+			for (i = 0; i < MAX_NUM_TID; i++)
+				sta_ptr->ampdu_sta[i] = BA_STREAM_NOT_ALLOWED;
+		}
+
+		memset(sta_ptr->rx_seq, 0xff, sizeof(sta_ptr->rx_seq));
+	} else {
+		dev_dbg(priv->adapter->dev,
+			"tdls: enable link %pM failed\n", peer);
+		if (sta_ptr) {
+			mwifiex_11n_cleanup_reorder_tbl(priv);
+			spin_lock_irqsave(&priv->wmm.ra_list_spinlock,
+					  flags);
+			mwifiex_11n_delete_all_tx_ba_stream_tbl(priv);
+			spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock,
+					       flags);
+			mwifiex_del_sta_entry(priv, peer);
+		}
+
+		return -1;
+	}
+
+	return 0;
+}
+
+int mwifiex_tdls_oper(struct mwifiex_private *priv, u8 *peer, u8 action)
+{
+	switch (action) {
+	case MWIFIEX_TDLS_ENABLE_LINK:
+		return mwifiex_tdls_process_enable_link(priv, peer);
+	case MWIFIEX_TDLS_DISABLE_LINK:
+		return mwifiex_tdls_process_disable_link(priv, peer);
+	}
+	return 0;
+}
-- 
cgit v1.2.2


From e48e0de0053f077dc8a98e1e06019024e93bb866 Mon Sep 17 00:00:00 2001
From: Avinash Patil <patila@marvell.com>
Date: Fri, 7 Feb 2014 16:30:33 -0800
Subject: mwifiex: add cfg80211 add_station handler support

This patch adds cfg80211 add_station handler support for mwifiex
which is needed for TDLS setup. Driver issues create TDLS link
command to FW upon receiving add_station from cfg80211.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/cfg80211.c    | 18 ++++++++++++++++++
 drivers/net/wireless/mwifiex/sta_cmd.c     |  3 +++
 drivers/net/wireless/mwifiex/sta_cmdresp.c | 15 +++++++++++++++
 drivers/net/wireless/mwifiex/tdls.c        | 28 ++++++++++++++++++++++++++++
 4 files changed, 64 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index 88cff9ca5577..cac8aea69ce5 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -2717,6 +2717,23 @@ mwifiex_cfg80211_tdls_oper(struct wiphy *wiphy, struct net_device *dev,
 	return mwifiex_tdls_oper(priv, peer, action);
 }
 
+static int
+mwifiex_cfg80211_add_station(struct wiphy *wiphy,
+			     struct net_device *dev,
+			     u8 *mac, struct station_parameters *params)
+{
+	struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
+
+	if (!(params->sta_flags_set & BIT(NL80211_STA_FLAG_TDLS_PEER)))
+		return -ENOTSUPP;
+
+	/* make sure we are in station mode and connected */
+	if ((priv->bss_type != MWIFIEX_BSS_TYPE_STA) || !priv->media_connected)
+		return -ENOTSUPP;
+
+	return mwifiex_tdls_oper(priv, mac, MWIFIEX_TDLS_CREATE_LINK);
+}
+
 /* station cfg80211 operations */
 static struct cfg80211_ops mwifiex_cfg80211_ops = {
 	.add_virtual_intf = mwifiex_add_virtual_intf,
@@ -2754,6 +2771,7 @@ static struct cfg80211_ops mwifiex_cfg80211_ops = {
 	.set_coalesce = mwifiex_cfg80211_set_coalesce,
 	.tdls_mgmt = mwifiex_cfg80211_tdls_mgmt,
 	.tdls_oper = mwifiex_cfg80211_tdls_oper,
+	.add_station = mwifiex_cfg80211_add_station,
 };
 
 #ifdef CONFIG_PM
diff --git a/drivers/net/wireless/mwifiex/sta_cmd.c b/drivers/net/wireless/mwifiex/sta_cmd.c
index 4559f84e64b5..1e36fa7a6463 100644
--- a/drivers/net/wireless/mwifiex/sta_cmd.c
+++ b/drivers/net/wireless/mwifiex/sta_cmd.c
@@ -1300,6 +1300,9 @@ mwifiex_cmd_tdls_oper(struct mwifiex_private *priv,
 	case MWIFIEX_TDLS_DISABLE_LINK:
 		tdls_oper->tdls_action = cpu_to_le16(ACT_TDLS_DELETE);
 		break;
+	case MWIFIEX_TDLS_CREATE_LINK:
+		tdls_oper->tdls_action = cpu_to_le16(ACT_TDLS_CREATE);
+		break;
 	default:
 		dev_err(priv->adapter->dev, "Unknown TDLS operation\n");
 		return -ENOTSUPP;
diff --git a/drivers/net/wireless/mwifiex/sta_cmdresp.c b/drivers/net/wireless/mwifiex/sta_cmdresp.c
index cb17f490bc6d..396b93682bd8 100644
--- a/drivers/net/wireless/mwifiex/sta_cmdresp.c
+++ b/drivers/net/wireless/mwifiex/sta_cmdresp.c
@@ -807,6 +807,8 @@ static int mwifiex_ret_tdls_oper(struct mwifiex_private *priv,
 	struct host_cmd_ds_tdls_oper *cmd_tdls_oper = &resp->params.tdls_oper;
 	u16 reason = le16_to_cpu(cmd_tdls_oper->reason);
 	u16 action = le16_to_cpu(cmd_tdls_oper->tdls_action);
+	struct mwifiex_sta_node *node =
+			   mwifiex_get_sta_entry(priv, cmd_tdls_oper->peer_mac);
 
 	switch (action) {
 	case ACT_TDLS_DELETE:
@@ -819,6 +821,19 @@ static int mwifiex_ret_tdls_oper(struct mwifiex_private *priv,
 				"TDLS link config for %pM successful\n",
 				cmd_tdls_oper->peer_mac);
 		break;
+	case ACT_TDLS_CREATE:
+		if (reason) {
+			dev_err(priv->adapter->dev,
+				"TDLS link creation for %pM failed: reason %d",
+				cmd_tdls_oper->peer_mac, reason);
+			if (node && reason != TDLS_ERR_LINK_EXISTS)
+				node->tdls_status = TDLS_SETUP_FAILURE;
+		} else {
+			dev_dbg(priv->adapter->dev,
+				"TDLS link creation for %pM successful",
+				cmd_tdls_oper->peer_mac);
+		}
+		break;
 	default:
 		dev_err(priv->adapter->dev,
 			"Unknown TDLS command action respnse %d", action);
diff --git a/drivers/net/wireless/mwifiex/tdls.c b/drivers/net/wireless/mwifiex/tdls.c
index 7fead7bf768f..1d5ed70432d6 100644
--- a/drivers/net/wireless/mwifiex/tdls.c
+++ b/drivers/net/wireless/mwifiex/tdls.c
@@ -543,6 +543,32 @@ void mwifiex_process_tdls_action_frame(struct mwifiex_private *priv,
 	return;
 }
 
+static int
+mwifiex_tdls_process_create_link(struct mwifiex_private *priv, u8 *peer)
+{
+	struct mwifiex_sta_node *sta_ptr;
+	struct mwifiex_ds_tdls_oper tdls_oper;
+
+	memset(&tdls_oper, 0, sizeof(struct mwifiex_ds_tdls_oper));
+	sta_ptr = mwifiex_get_sta_entry(priv, peer);
+
+	if (sta_ptr && sta_ptr->tdls_status == TDLS_SETUP_INPROGRESS) {
+		dev_dbg(priv->adapter->dev,
+			"Setup already in progress for peer %pM\n", peer);
+		return 0;
+	}
+
+	sta_ptr = mwifiex_add_sta_entry(priv, peer);
+	if (!sta_ptr)
+		return -ENOMEM;
+
+	sta_ptr->tdls_status = TDLS_SETUP_INPROGRESS;
+	memcpy(&tdls_oper.peer_mac, peer, ETH_ALEN);
+	tdls_oper.tdls_action = MWIFIEX_TDLS_CREATE_LINK;
+	return mwifiex_send_cmd_sync(priv, HostCmd_CMD_TDLS_OPER,
+				     HostCmd_ACT_GEN_SET, 0, &tdls_oper);
+}
+
 static int
 mwifiex_tdls_process_disable_link(struct mwifiex_private *priv, u8 *peer)
 {
@@ -634,6 +660,8 @@ int mwifiex_tdls_oper(struct mwifiex_private *priv, u8 *peer, u8 action)
 		return mwifiex_tdls_process_enable_link(priv, peer);
 	case MWIFIEX_TDLS_DISABLE_LINK:
 		return mwifiex_tdls_process_disable_link(priv, peer);
+	case MWIFIEX_TDLS_CREATE_LINK:
+		return mwifiex_tdls_process_create_link(priv, peer);
 	}
 	return 0;
 }
-- 
cgit v1.2.2


From 1f4dfd8a1e911cd9e12994cd7cc1180e94ee1bc5 Mon Sep 17 00:00:00 2001
From: Avinash Patil <patila@marvell.com>
Date: Fri, 7 Feb 2014 16:30:34 -0800
Subject: mwifiex: add cfg80211 change_station handler support

This patch adds cfg80211 change_station handler support for mwifiex
which is needed for TDLS link setup. Driver creates a command to
modify peer link capabilities and issues command to FW.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/cfg80211.c    | 25 +++++++++++
 drivers/net/wireless/mwifiex/fw.h          |  5 +++
 drivers/net/wireless/mwifiex/main.h        |  1 +
 drivers/net/wireless/mwifiex/sta_cmd.c     | 71 +++++++++++++++++++++++++++++-
 drivers/net/wireless/mwifiex/sta_cmdresp.c | 13 ++++++
 drivers/net/wireless/mwifiex/tdls.c        | 23 ++++++++++
 6 files changed, 137 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index cac8aea69ce5..436ba437a4ba 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -2734,6 +2734,30 @@ mwifiex_cfg80211_add_station(struct wiphy *wiphy,
 	return mwifiex_tdls_oper(priv, mac, MWIFIEX_TDLS_CREATE_LINK);
 }
 
+static int
+mwifiex_cfg80211_change_station(struct wiphy *wiphy,
+				struct net_device *dev,
+				u8 *mac, struct station_parameters *params)
+{
+	int ret;
+	struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
+
+	/* we support change_station handler only for TDLS peers*/
+	if (!(params->sta_flags_set & BIT(NL80211_STA_FLAG_TDLS_PEER)))
+		return -ENOTSUPP;
+
+	/* make sure we are in station mode and connected */
+	if ((priv->bss_type != MWIFIEX_BSS_TYPE_STA) || !priv->media_connected)
+		return -ENOTSUPP;
+
+	priv->sta_params = params;
+
+	ret = mwifiex_tdls_oper(priv, mac, MWIFIEX_TDLS_CONFIG_LINK);
+	priv->sta_params = NULL;
+
+	return ret;
+}
+
 /* station cfg80211 operations */
 static struct cfg80211_ops mwifiex_cfg80211_ops = {
 	.add_virtual_intf = mwifiex_add_virtual_intf,
@@ -2772,6 +2796,7 @@ static struct cfg80211_ops mwifiex_cfg80211_ops = {
 	.tdls_mgmt = mwifiex_cfg80211_tdls_mgmt,
 	.tdls_oper = mwifiex_cfg80211_tdls_oper,
 	.add_station = mwifiex_cfg80211_add_station,
+	.change_station = mwifiex_cfg80211_change_station,
 };
 
 #ifdef CONFIG_PM
diff --git a/drivers/net/wireless/mwifiex/fw.h b/drivers/net/wireless/mwifiex/fw.h
index 3180fc6b7c6d..8c119bc93899 100644
--- a/drivers/net/wireless/mwifiex/fw.h
+++ b/drivers/net/wireless/mwifiex/fw.h
@@ -1391,6 +1391,11 @@ struct mwifiex_ie_types_extcap {
 	u8 ext_capab[0];
 } __packed;
 
+struct mwifiex_ie_types_qos_info {
+	struct mwifiex_ie_types_header header;
+	u8 qos_info;
+} __packed;
+
 struct host_cmd_ds_mac_reg_access {
 	__le16 action;
 	__le16 offset;
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index d35c9950efba..c8c30a4c9a73 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -529,6 +529,7 @@ struct mwifiex_private {
 	unsigned long csa_expire_time;
 	u8 del_list_idx;
 	bool hs2_enabled;
+	struct station_parameters *sta_params;
 };
 
 enum mwifiex_ba_status {
diff --git a/drivers/net/wireless/mwifiex/sta_cmd.c b/drivers/net/wireless/mwifiex/sta_cmd.c
index 1e36fa7a6463..8f1bcc3255dd 100644
--- a/drivers/net/wireless/mwifiex/sta_cmd.c
+++ b/drivers/net/wireless/mwifiex/sta_cmd.c
@@ -1288,27 +1288,96 @@ mwifiex_cmd_tdls_oper(struct mwifiex_private *priv,
 	struct host_cmd_ds_tdls_oper *tdls_oper = &cmd->params.tdls_oper;
 	struct mwifiex_ds_tdls_oper *oper = data_buf;
 	struct mwifiex_sta_node *sta_ptr;
+	struct host_cmd_tlv_rates *tlv_rates;
+	struct mwifiex_ie_types_htcap *ht_capab;
+	struct mwifiex_ie_types_qos_info *wmm_qos_info;
+	struct mwifiex_ie_types_extcap *extcap;
+	u8 *pos, qos_info;
+	u16 config_len = 0;
+	struct station_parameters *params = priv->sta_params;
 
 	cmd->command = cpu_to_le16(HostCmd_CMD_TDLS_OPER);
 	cmd->size = cpu_to_le16(S_DS_GEN);
+	le16_add_cpu(&cmd->size, sizeof(struct host_cmd_ds_tdls_oper));
 
 	tdls_oper->reason = 0;
 	memcpy(tdls_oper->peer_mac, oper->peer_mac, ETH_ALEN);
 	sta_ptr = mwifiex_get_sta_entry(priv, oper->peer_mac);
 
+	pos = (u8 *)tdls_oper + sizeof(struct host_cmd_ds_tdls_oper);
+
 	switch (oper->tdls_action) {
 	case MWIFIEX_TDLS_DISABLE_LINK:
 		tdls_oper->tdls_action = cpu_to_le16(ACT_TDLS_DELETE);
 		break;
 	case MWIFIEX_TDLS_CREATE_LINK:
 		tdls_oper->tdls_action = cpu_to_le16(ACT_TDLS_CREATE);
+		break;
+	case MWIFIEX_TDLS_CONFIG_LINK:
+		tdls_oper->tdls_action = cpu_to_le16(ACT_TDLS_CONFIG);
+
+		if (!params) {
+			dev_err(priv->adapter->dev,
+				"TDLS config params not available for %pM\n",
+				oper->peer_mac);
+			return -ENODATA;
+		}
+
+		*(__le16 *)pos = cpu_to_le16(params->capability);
+		config_len += sizeof(params->capability);
+
+		qos_info = params->uapsd_queues | (params->max_sp << 5);
+		wmm_qos_info = (struct mwifiex_ie_types_qos_info *)(pos +
+								    config_len);
+		wmm_qos_info->header.type = cpu_to_le16(WLAN_EID_QOS_CAPA);
+		wmm_qos_info->header.len = cpu_to_le16(sizeof(qos_info));
+		wmm_qos_info->qos_info = qos_info;
+		config_len += sizeof(struct mwifiex_ie_types_qos_info);
+
+		if (params->ht_capa) {
+			ht_capab = (struct mwifiex_ie_types_htcap *)(pos +
+								    config_len);
+			ht_capab->header.type =
+					    cpu_to_le16(WLAN_EID_HT_CAPABILITY);
+			ht_capab->header.len =
+				   cpu_to_le16(sizeof(struct ieee80211_ht_cap));
+			memcpy(&ht_capab->ht_cap, params->ht_capa,
+			       sizeof(struct ieee80211_ht_cap));
+			config_len += sizeof(struct mwifiex_ie_types_htcap);
+		}
+
+		if (params->supported_rates && params->supported_rates_len) {
+			tlv_rates = (struct host_cmd_tlv_rates *)(pos +
+								  config_len);
+			tlv_rates->header.type =
+					       cpu_to_le16(WLAN_EID_SUPP_RATES);
+			tlv_rates->header.len =
+				       cpu_to_le16(params->supported_rates_len);
+			memcpy(tlv_rates->rates, params->supported_rates,
+			       params->supported_rates_len);
+			config_len += sizeof(struct host_cmd_tlv_rates) +
+				      params->supported_rates_len;
+		}
+
+		if (params->ext_capab && params->ext_capab_len) {
+			extcap = (struct mwifiex_ie_types_extcap *)(pos +
+								    config_len);
+			extcap->header.type =
+					   cpu_to_le16(WLAN_EID_EXT_CAPABILITY);
+			extcap->header.len = cpu_to_le16(params->ext_capab_len);
+			memcpy(extcap->ext_capab, params->ext_capab,
+			       params->ext_capab_len);
+			config_len += sizeof(struct mwifiex_ie_types_extcap) +
+				      params->ext_capab_len;
+		}
+
 		break;
 	default:
 		dev_err(priv->adapter->dev, "Unknown TDLS operation\n");
 		return -ENOTSUPP;
 	}
 
-	le16_add_cpu(&cmd->size, sizeof(struct host_cmd_ds_tdls_oper));
+	le16_add_cpu(&cmd->size, config_len);
 
 	return 0;
 }
diff --git a/drivers/net/wireless/mwifiex/sta_cmdresp.c b/drivers/net/wireless/mwifiex/sta_cmdresp.c
index 396b93682bd8..48abab6bfce9 100644
--- a/drivers/net/wireless/mwifiex/sta_cmdresp.c
+++ b/drivers/net/wireless/mwifiex/sta_cmdresp.c
@@ -834,6 +834,19 @@ static int mwifiex_ret_tdls_oper(struct mwifiex_private *priv,
 				cmd_tdls_oper->peer_mac);
 		}
 		break;
+	case ACT_TDLS_CONFIG:
+		if (reason) {
+			dev_err(priv->adapter->dev,
+				"TDLS link config for %pM failed, reason %d\n",
+				cmd_tdls_oper->peer_mac, reason);
+			if (node)
+				node->tdls_status = TDLS_SETUP_FAILURE;
+		} else {
+			dev_dbg(priv->adapter->dev,
+				"TDLS link config for %pM successful\n",
+				cmd_tdls_oper->peer_mac);
+		}
+		break;
 	default:
 		dev_err(priv->adapter->dev,
 			"Unknown TDLS command action respnse %d", action);
diff --git a/drivers/net/wireless/mwifiex/tdls.c b/drivers/net/wireless/mwifiex/tdls.c
index 1d5ed70432d6..f37862b5fabb 100644
--- a/drivers/net/wireless/mwifiex/tdls.c
+++ b/drivers/net/wireless/mwifiex/tdls.c
@@ -543,6 +543,27 @@ void mwifiex_process_tdls_action_frame(struct mwifiex_private *priv,
 	return;
 }
 
+static int
+mwifiex_tdls_process_config_link(struct mwifiex_private *priv, u8 *peer)
+{
+	struct mwifiex_sta_node *sta_ptr;
+	struct mwifiex_ds_tdls_oper tdls_oper;
+
+	memset(&tdls_oper, 0, sizeof(struct mwifiex_ds_tdls_oper));
+	sta_ptr = mwifiex_get_sta_entry(priv, peer);
+
+	if (!sta_ptr || sta_ptr->tdls_status == TDLS_SETUP_FAILURE) {
+		dev_err(priv->adapter->dev,
+			"link absent for peer %pM; cannot config\n", peer);
+		return -EINVAL;
+	}
+
+	memcpy(&tdls_oper.peer_mac, peer, ETH_ALEN);
+	tdls_oper.tdls_action = MWIFIEX_TDLS_CONFIG_LINK;
+	return mwifiex_send_cmd_sync(priv, HostCmd_CMD_TDLS_OPER,
+				     HostCmd_ACT_GEN_SET, 0, &tdls_oper);
+}
+
 static int
 mwifiex_tdls_process_create_link(struct mwifiex_private *priv, u8 *peer)
 {
@@ -662,6 +683,8 @@ int mwifiex_tdls_oper(struct mwifiex_private *priv, u8 *peer, u8 action)
 		return mwifiex_tdls_process_disable_link(priv, peer);
 	case MWIFIEX_TDLS_CREATE_LINK:
 		return mwifiex_tdls_process_create_link(priv, peer);
+	case MWIFIEX_TDLS_CONFIG_LINK:
+		return mwifiex_tdls_process_config_link(priv, peer);
 	}
 	return 0;
 }
-- 
cgit v1.2.2


From 56bd24a18e1a7306a21f6b7d7716cced7e593057 Mon Sep 17 00:00:00 2001
From: Avinash Patil <patila@marvell.com>
Date: Fri, 7 Feb 2014 16:30:35 -0800
Subject: mwifiex: provision for holding and restoring packets during TDLS
 setup

While TDLS link is being setup, few packets from this station to
peer station may be buffered at AP. It may happen that once TDLS
link is setup, packets sent from station to peer on direct link
get delivered before traffic from AP arrives at peer station.
This results into packet reordering issue at peer station.

To avoid this, we hold data packets destined to TDLS peer during
TDLS setup. These packets are moved to temperory TDLS TX queue.
Upon successful TDLS setup, they are moved to RA list created for
this peer. Upon failure, packets are moved back to AP's RA list
for that particular TID.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/init.c |  1 +
 drivers/net/wireless/mwifiex/main.h |  1 +
 drivers/net/wireless/mwifiex/tdls.c | 94 +++++++++++++++++++++++++++++++++++++
 drivers/net/wireless/mwifiex/wmm.c  |  4 ++
 4 files changed, 100 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/init.c b/drivers/net/wireless/mwifiex/init.c
index dead65960d34..9dc8059778a0 100644
--- a/drivers/net/wireless/mwifiex/init.c
+++ b/drivers/net/wireless/mwifiex/init.c
@@ -452,6 +452,7 @@ int mwifiex_init_lock_list(struct mwifiex_adapter *adapter)
 		INIT_LIST_HEAD(&priv->tx_ba_stream_tbl_ptr);
 		INIT_LIST_HEAD(&priv->rx_reorder_tbl_ptr);
 		INIT_LIST_HEAD(&priv->sta_list);
+		skb_queue_head_init(&priv->tdls_txq);
 
 		spin_lock_init(&priv->tx_ba_stream_tbl_lock);
 		spin_lock_init(&priv->rx_reorder_tbl_lock);
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index c8c30a4c9a73..bce65f5f0046 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -530,6 +530,7 @@ struct mwifiex_private {
 	u8 del_list_idx;
 	bool hs2_enabled;
 	struct station_parameters *sta_params;
+	struct sk_buff_head tdls_txq;
 };
 
 enum mwifiex_ba_status {
diff --git a/drivers/net/wireless/mwifiex/tdls.c b/drivers/net/wireless/mwifiex/tdls.c
index f37862b5fabb..3198739c133e 100644
--- a/drivers/net/wireless/mwifiex/tdls.c
+++ b/drivers/net/wireless/mwifiex/tdls.c
@@ -24,6 +24,96 @@
 #define TDLS_RESP_FIX_LEN     8
 #define TDLS_CONFIRM_FIX_LEN  6
 
+static void
+mwifiex_restore_tdls_packets(struct mwifiex_private *priv, u8 *mac, u8 status)
+{
+	struct mwifiex_ra_list_tbl *ra_list;
+	struct list_head *tid_list;
+	struct sk_buff *skb, *tmp;
+	struct mwifiex_txinfo *tx_info;
+	unsigned long flags;
+	u32 tid;
+	u8 tid_down;
+
+	dev_dbg(priv->adapter->dev, "%s: %pM\n", __func__, mac);
+	spin_lock_irqsave(&priv->wmm.ra_list_spinlock, flags);
+
+	skb_queue_walk_safe(&priv->tdls_txq, skb, tmp) {
+		if (!ether_addr_equal(mac, skb->data))
+			continue;
+
+		__skb_unlink(skb, &priv->tdls_txq);
+		tx_info = MWIFIEX_SKB_TXCB(skb);
+		tid = skb->priority;
+		tid_down = mwifiex_wmm_downgrade_tid(priv, tid);
+
+		if (status == TDLS_SETUP_COMPLETE) {
+			ra_list = mwifiex_wmm_get_queue_raptr(priv, tid, mac);
+			tx_info->flags |= MWIFIEX_BUF_FLAG_TDLS_PKT;
+		} else {
+			tid_list = &priv->wmm.tid_tbl_ptr[tid_down].ra_list;
+			if (!list_empty(tid_list))
+				ra_list = list_first_entry(tid_list,
+					      struct mwifiex_ra_list_tbl, list);
+			else
+				ra_list = NULL;
+			tx_info->flags &= ~MWIFIEX_BUF_FLAG_TDLS_PKT;
+		}
+
+		if (!ra_list) {
+			mwifiex_write_data_complete(priv->adapter, skb, 0, -1);
+			continue;
+		}
+
+		skb_queue_tail(&ra_list->skb_head, skb);
+
+		ra_list->ba_pkt_count++;
+		ra_list->total_pkt_count++;
+
+		if (atomic_read(&priv->wmm.highest_queued_prio) <
+						       tos_to_tid_inv[tid_down])
+			atomic_set(&priv->wmm.highest_queued_prio,
+				   tos_to_tid_inv[tid_down]);
+
+		atomic_inc(&priv->wmm.tx_pkts_queued);
+	}
+
+	spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock, flags);
+	return;
+}
+
+static void mwifiex_hold_tdls_packets(struct mwifiex_private *priv, u8 *mac)
+{
+	struct mwifiex_ra_list_tbl *ra_list;
+	struct list_head *ra_list_head;
+	struct sk_buff *skb, *tmp;
+	unsigned long flags;
+	int i;
+
+	dev_dbg(priv->adapter->dev, "%s: %pM\n", __func__, mac);
+	spin_lock_irqsave(&priv->wmm.ra_list_spinlock, flags);
+
+	for (i = 0; i < MAX_NUM_TID; i++) {
+		if (!list_empty(&priv->wmm.tid_tbl_ptr[i].ra_list)) {
+			ra_list_head = &priv->wmm.tid_tbl_ptr[i].ra_list;
+			list_for_each_entry(ra_list, ra_list_head, list) {
+				skb_queue_walk_safe(&ra_list->skb_head, skb,
+						    tmp) {
+					if (!ether_addr_equal(mac, skb->data))
+						continue;
+					__skb_unlink(skb, &ra_list->skb_head);
+					atomic_dec(&priv->wmm.tx_pkts_queued);
+					ra_list->total_pkt_count--;
+					skb_queue_tail(&priv->tdls_txq, skb);
+				}
+			}
+		}
+	}
+
+	spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock, flags);
+	return;
+}
+
 /* This function appends rate TLV to scan config command. */
 static int
 mwifiex_tdls_append_rates_ie(struct mwifiex_private *priv,
@@ -584,6 +674,7 @@ mwifiex_tdls_process_create_link(struct mwifiex_private *priv, u8 *peer)
 		return -ENOMEM;
 
 	sta_ptr->tdls_status = TDLS_SETUP_INPROGRESS;
+	mwifiex_hold_tdls_packets(priv, peer);
 	memcpy(&tdls_oper.peer_mac, peer, ETH_ALEN);
 	tdls_oper.tdls_action = MWIFIEX_TDLS_CREATE_LINK;
 	return mwifiex_send_cmd_sync(priv, HostCmd_CMD_TDLS_OPER,
@@ -612,6 +703,7 @@ mwifiex_tdls_process_disable_link(struct mwifiex_private *priv, u8 *peer)
 		mwifiex_del_sta_entry(priv, peer);
 	}
 
+	mwifiex_restore_tdls_packets(priv, peer, TDLS_LINK_TEARDOWN);
 	memcpy(&tdls_oper.peer_mac, peer, ETH_ALEN);
 	tdls_oper.tdls_action = MWIFIEX_TDLS_DISABLE_LINK;
 	return mwifiex_send_cmd_sync(priv, HostCmd_CMD_TDLS_OPER,
@@ -655,6 +747,7 @@ mwifiex_tdls_process_enable_link(struct mwifiex_private *priv, u8 *peer)
 		}
 
 		memset(sta_ptr->rx_seq, 0xff, sizeof(sta_ptr->rx_seq));
+		mwifiex_restore_tdls_packets(priv, peer, TDLS_SETUP_COMPLETE);
 	} else {
 		dev_dbg(priv->adapter->dev,
 			"tdls: enable link %pM failed\n", peer);
@@ -667,6 +760,7 @@ mwifiex_tdls_process_enable_link(struct mwifiex_private *priv, u8 *peer)
 					       flags);
 			mwifiex_del_sta_entry(priv, peer);
 		}
+		mwifiex_restore_tdls_packets(priv, peer, TDLS_LINK_TEARDOWN);
 
 		return -1;
 	}
diff --git a/drivers/net/wireless/mwifiex/wmm.c b/drivers/net/wireless/mwifiex/wmm.c
index 557d36318d1d..e9f7628684ce 100644
--- a/drivers/net/wireless/mwifiex/wmm.c
+++ b/drivers/net/wireless/mwifiex/wmm.c
@@ -533,6 +533,7 @@ void
 mwifiex_clean_txrx(struct mwifiex_private *priv)
 {
 	unsigned long flags;
+	struct sk_buff *skb, *tmp;
 
 	mwifiex_11n_cleanup_reorder_tbl(priv);
 	spin_lock_irqsave(&priv->wmm.ra_list_spinlock, flags);
@@ -549,6 +550,9 @@ mwifiex_clean_txrx(struct mwifiex_private *priv)
 	if (priv->adapter->if_ops.clean_pcie_ring)
 		priv->adapter->if_ops.clean_pcie_ring(priv->adapter);
 	spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock, flags);
+
+	skb_queue_walk_safe(&priv->tdls_txq, skb, tmp)
+		mwifiex_write_data_complete(priv->adapter, skb, 0, -1);
 }
 
 /*
-- 
cgit v1.2.2


From d63bf5e5e00dc025c71532e9244a96966ac8e252 Mon Sep 17 00:00:00 2001
From: Avinash Patil <patila@marvell.com>
Date: Fri, 7 Feb 2014 16:30:36 -0800
Subject: mwifiex: tdls related handling for data packets addressed to TDLS
 peer

1. If data packet is addressed to TDLS peer for which link is
established, mark these packets with TDLS flag so that FW can
send them on direct link instead of sending via AP.
2. If data packet is addressed to TDLS peer and TDLS setup is
underway, move these packets to TDLS queue.
3. If this packet is TDLS setup packet, do not block it.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/main.h |  1 +
 drivers/net/wireless/mwifiex/tdls.c | 11 ++++++++++
 drivers/net/wireless/mwifiex/wmm.c  | 42 +++++++++++++++++++++++++++++++------
 3 files changed, 48 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index bce65f5f0046..3001332191a3 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -1213,6 +1213,7 @@ int mwifiex_send_tdls_action_frame(struct mwifiex_private *priv,
 void mwifiex_process_tdls_action_frame(struct mwifiex_private *priv,
 				       u8 *buf, int len);
 int mwifiex_tdls_oper(struct mwifiex_private *priv, u8 *peer, u8 action);
+int mwifiex_get_tdls_link_status(struct mwifiex_private *priv, u8 *mac);
 
 #ifdef CONFIG_DEBUG_FS
 void mwifiex_debugfs_init(void);
diff --git a/drivers/net/wireless/mwifiex/tdls.c b/drivers/net/wireless/mwifiex/tdls.c
index 3198739c133e..7ef3593e2c44 100644
--- a/drivers/net/wireless/mwifiex/tdls.c
+++ b/drivers/net/wireless/mwifiex/tdls.c
@@ -782,3 +782,14 @@ int mwifiex_tdls_oper(struct mwifiex_private *priv, u8 *peer, u8 action)
 	}
 	return 0;
 }
+
+int mwifiex_get_tdls_link_status(struct mwifiex_private *priv, u8 *mac)
+{
+	struct mwifiex_sta_node *sta_ptr;
+
+	sta_ptr = mwifiex_get_sta_entry(priv, mac);
+	if (sta_ptr)
+		return sta_ptr->tdls_status;
+
+	return TDLS_NOT_SETUP;
+}
diff --git a/drivers/net/wireless/mwifiex/wmm.c b/drivers/net/wireless/mwifiex/wmm.c
index e9f7628684ce..63496ed10272 100644
--- a/drivers/net/wireless/mwifiex/wmm.c
+++ b/drivers/net/wireless/mwifiex/wmm.c
@@ -631,6 +631,21 @@ mwifiex_wmm_add_buf_txqueue(struct mwifiex_private *priv,
 	struct mwifiex_ra_list_tbl *ra_list;
 	u8 ra[ETH_ALEN], tid_down;
 	unsigned long flags;
+	struct list_head list_head;
+	int tdls_status = TDLS_NOT_SETUP;
+	struct ethhdr *eth_hdr = (struct ethhdr *)skb->data;
+	struct mwifiex_txinfo *tx_info = MWIFIEX_SKB_TXCB(skb);
+
+	memcpy(ra, eth_hdr->h_dest, ETH_ALEN);
+
+	if (GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_STA &&
+	    ISSUPP_TDLS_ENABLED(adapter->fw_cap_info)) {
+		if (ntohs(eth_hdr->h_proto) == ETH_P_TDLS)
+			dev_dbg(adapter->dev,
+				"TDLS setup packet for %pM. Don't block\n", ra);
+		else
+			tdls_status = mwifiex_get_tdls_link_status(priv, ra);
+	}
 
 	if (!priv->media_connected && !mwifiex_is_skb_mgmt_frame(skb)) {
 		dev_dbg(adapter->dev, "data: drop packet in disconnect\n");
@@ -649,12 +664,27 @@ mwifiex_wmm_add_buf_txqueue(struct mwifiex_private *priv,
 	   have only 1 raptr for a tid in case of infra */
 	if (!mwifiex_queuing_ra_based(priv) &&
 	    !mwifiex_is_skb_mgmt_frame(skb)) {
-		if (!list_empty(&priv->wmm.tid_tbl_ptr[tid_down].ra_list))
-			ra_list = list_first_entry(
-				&priv->wmm.tid_tbl_ptr[tid_down].ra_list,
-				struct mwifiex_ra_list_tbl, list);
-		else
-			ra_list = NULL;
+		switch (tdls_status) {
+		case TDLS_SETUP_COMPLETE:
+			ra_list = mwifiex_wmm_get_queue_raptr(priv, tid_down,
+							      ra);
+			tx_info->flags |= MWIFIEX_BUF_FLAG_TDLS_PKT;
+			break;
+		case TDLS_SETUP_INPROGRESS:
+			skb_queue_tail(&priv->tdls_txq, skb);
+			spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock,
+					       flags);
+			return;
+		default:
+			list_head = priv->wmm.tid_tbl_ptr[tid_down].ra_list;
+			if (!list_empty(&list_head))
+				ra_list = list_first_entry(
+					&list_head, struct mwifiex_ra_list_tbl,
+					list);
+			else
+				ra_list = NULL;
+			break;
+		}
 	} else {
 		memcpy(ra, skb->data, ETH_ALEN);
 		if (ra[0] & 0x01 || mwifiex_is_skb_mgmt_frame(skb))
-- 
cgit v1.2.2


From daeb5bb48256d7488246d48453b2315281ce9c75 Mon Sep 17 00:00:00 2001
From: Avinash Patil <patila@marvell.com>
Date: Fri, 7 Feb 2014 16:30:37 -0800
Subject: mwifiex: AMPDU support for TDLS link

This patch adds AMPDU support for TDLS link. We have set 11n
capabilities including AMPDU parameters during ENABLE_LINK.
We set a variable in RA list to indicate this as TDLS link.
This patch uses these capabilities to know if AMPDU is allowed
on TDLS link and enables AMPDU aggregation for TX and RX reording
support for RA list for this peer.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/11n.h           | 18 ++++++++++++++++--
 drivers/net/wireless/mwifiex/11n_rxreorder.c |  6 +++++-
 drivers/net/wireless/mwifiex/main.h          |  1 +
 drivers/net/wireless/mwifiex/tdls.c          |  1 +
 drivers/net/wireless/mwifiex/wmm.c           |  9 ++++++++-
 5 files changed, 31 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/11n.h b/drivers/net/wireless/mwifiex/11n.h
index fde39fedf0c0..12bb6acbdd58 100644
--- a/drivers/net/wireless/mwifiex/11n.h
+++ b/drivers/net/wireless/mwifiex/11n.h
@@ -81,11 +81,15 @@ static inline u8
 mwifiex_is_ampdu_allowed(struct mwifiex_private *priv,
 			 struct mwifiex_ra_list_tbl *ptr, int tid)
 {
-	if (GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_UAP)
+	if (GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_UAP) {
 		return mwifiex_is_station_ampdu_allowed(priv, ptr, tid);
-	else
+	} else {
+		if (ptr->tdls_link)
+			return mwifiex_is_station_ampdu_allowed(priv, ptr, tid);
+
 		return (priv->aggr_prio_tbl[tid].ampdu_ap !=
 			BA_STREAM_NOT_ALLOWED) ? true : false;
+	}
 }
 
 /*
@@ -179,4 +183,14 @@ static inline int mwifiex_is_sta_11n_enabled(struct mwifiex_private *priv,
 
 	return node->is_11n_enabled;
 }
+
+static inline u8
+mwifiex_tdls_peer_11n_enabled(struct mwifiex_private *priv, u8 *ra)
+{
+	struct mwifiex_sta_node *node = mwifiex_get_sta_entry(priv, ra);
+	if (node)
+		return node->is_11n_enabled;
+
+	return false;
+}
 #endif /* !_MWIFIEX_11N_H_ */
diff --git a/drivers/net/wireless/mwifiex/11n_rxreorder.c b/drivers/net/wireless/mwifiex/11n_rxreorder.c
index ada809f576fe..3767399576b3 100644
--- a/drivers/net/wireless/mwifiex/11n_rxreorder.c
+++ b/drivers/net/wireless/mwifiex/11n_rxreorder.c
@@ -290,7 +290,11 @@ mwifiex_11n_create_rx_reorder_tbl(struct mwifiex_private *priv, u8 *ta,
 				last_seq = node->rx_seq[tid];
 		}
 	} else {
-		last_seq = priv->rx_seq[tid];
+		node = mwifiex_get_sta_entry(priv, ta);
+		if (node)
+			last_seq = node->rx_seq[tid];
+		else
+			last_seq = priv->rx_seq[tid];
 	}
 
 	if (last_seq != MWIFIEX_DEF_11N_RX_SEQ_NUM &&
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index 3001332191a3..6d49d99045c0 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -210,6 +210,7 @@ struct mwifiex_ra_list_tbl {
 	u16 ba_pkt_count;
 	u8 ba_packet_thr;
 	u16 total_pkt_count;
+	bool tdls_link;
 };
 
 struct mwifiex_tid_tbl {
diff --git a/drivers/net/wireless/mwifiex/tdls.c b/drivers/net/wireless/mwifiex/tdls.c
index 7ef3593e2c44..243beaba9160 100644
--- a/drivers/net/wireless/mwifiex/tdls.c
+++ b/drivers/net/wireless/mwifiex/tdls.c
@@ -49,6 +49,7 @@ mwifiex_restore_tdls_packets(struct mwifiex_private *priv, u8 *mac, u8 status)
 
 		if (status == TDLS_SETUP_COMPLETE) {
 			ra_list = mwifiex_wmm_get_queue_raptr(priv, tid, mac);
+			ra_list->tdls_link = true;
 			tx_info->flags |= MWIFIEX_BUF_FLAG_TDLS_PKT;
 		} else {
 			tid_list = &priv->wmm.tid_tbl_ptr[tid_down].ra_list;
diff --git a/drivers/net/wireless/mwifiex/wmm.c b/drivers/net/wireless/mwifiex/wmm.c
index 63496ed10272..e0ba0115e5ae 100644
--- a/drivers/net/wireless/mwifiex/wmm.c
+++ b/drivers/net/wireless/mwifiex/wmm.c
@@ -160,8 +160,15 @@ mwifiex_ralist_add(struct mwifiex_private *priv, u8 *ra)
 			break;
 
 		ra_list->is_11n_enabled = 0;
+		ra_list->tdls_link = false;
 		if (!mwifiex_queuing_ra_based(priv)) {
-			ra_list->is_11n_enabled = IS_11N_ENABLED(priv);
+			if (mwifiex_get_tdls_link_status(priv, ra) ==
+			    TDLS_SETUP_COMPLETE) {
+				ra_list->is_11n_enabled =
+					mwifiex_tdls_peer_11n_enabled(priv, ra);
+			} else {
+				ra_list->is_11n_enabled = IS_11N_ENABLED(priv);
+			}
 		} else {
 			ra_list->is_11n_enabled =
 				      mwifiex_is_sta_11n_enabled(priv, node);
-- 
cgit v1.2.2


From 9ed230bcbab74a84b4f7d8eade107cd4c20630df Mon Sep 17 00:00:00 2001
From: Avinash Patil <patila@marvell.com>
Date: Fri, 7 Feb 2014 16:30:38 -0800
Subject: mwifiex: pass ieee80211_vht_cap to mwifiex_fill_vht_cap_tlv

This patch changes mwifiex_fill_vht_cap_tlv function to pass
struct ieee80211_vht_cap instead of mwifiex_ie_types_vhtcap
so that it can be used generically.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/11ac.c | 23 ++++++++++++-----------
 1 file changed, 12 insertions(+), 11 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/11ac.c b/drivers/net/wireless/mwifiex/11ac.c
index 47383920eb12..5895bc8978a5 100644
--- a/drivers/net/wireless/mwifiex/11ac.c
+++ b/drivers/net/wireless/mwifiex/11ac.c
@@ -96,21 +96,21 @@ mwifiex_convert_mcsmap_to_maxrate(struct mwifiex_private *priv,
 
 static void
 mwifiex_fill_vht_cap_info(struct mwifiex_private *priv,
-			  struct mwifiex_ie_types_vhtcap *vht_cap, u8 bands)
+			  struct ieee80211_vht_cap *vht_cap, u8 bands)
 {
 	struct mwifiex_adapter *adapter = priv->adapter;
 
 	if (bands & BAND_A)
-		vht_cap->vht_cap.vht_cap_info =
+		vht_cap->vht_cap_info =
 				cpu_to_le32(adapter->usr_dot_11ac_dev_cap_a);
 	else
-		vht_cap->vht_cap.vht_cap_info =
+		vht_cap->vht_cap_info =
 				cpu_to_le32(adapter->usr_dot_11ac_dev_cap_bg);
 }
 
 static void
 mwifiex_fill_vht_cap_tlv(struct mwifiex_private *priv,
-			 struct mwifiex_ie_types_vhtcap *vht_cap, u8 bands)
+			 struct ieee80211_vht_cap *vht_cap, u8 bands)
 {
 	struct mwifiex_adapter *adapter = priv->adapter;
 	u16 mcs_map_user, mcs_map_resp, mcs_map_result;
@@ -121,7 +121,7 @@ mwifiex_fill_vht_cap_tlv(struct mwifiex_private *priv,
 
 	/* rx MCS Set: find the minimum of the user rx mcs and ap rx mcs */
 	mcs_map_user = GET_DEVRXMCSMAP(adapter->usr_dot_11ac_mcs_support);
-	mcs_map_resp = le16_to_cpu(vht_cap->vht_cap.supp_mcs.rx_mcs_map);
+	mcs_map_resp = le16_to_cpu(vht_cap->supp_mcs.rx_mcs_map);
 	mcs_map_result = 0;
 
 	for (nss = 1; nss <= 8; nss++) {
@@ -137,14 +137,14 @@ mwifiex_fill_vht_cap_tlv(struct mwifiex_private *priv,
 				      min(mcs_user, mcs_resp));
 	}
 
-	vht_cap->vht_cap.supp_mcs.rx_mcs_map = cpu_to_le16(mcs_map_result);
+	vht_cap->supp_mcs.rx_mcs_map = cpu_to_le16(mcs_map_result);
 
 	tmp = mwifiex_convert_mcsmap_to_maxrate(priv, bands, mcs_map_result);
-	vht_cap->vht_cap.supp_mcs.rx_highest = cpu_to_le16(tmp);
+	vht_cap->supp_mcs.rx_highest = cpu_to_le16(tmp);
 
 	/* tx MCS Set: find the minimum of the user tx mcs and ap tx mcs */
 	mcs_map_user = GET_DEVTXMCSMAP(adapter->usr_dot_11ac_mcs_support);
-	mcs_map_resp = le16_to_cpu(vht_cap->vht_cap.supp_mcs.tx_mcs_map);
+	mcs_map_resp = le16_to_cpu(vht_cap->supp_mcs.tx_mcs_map);
 	mcs_map_result = 0;
 
 	for (nss = 1; nss <= 8; nss++) {
@@ -159,10 +159,10 @@ mwifiex_fill_vht_cap_tlv(struct mwifiex_private *priv,
 				      min(mcs_user, mcs_resp));
 	}
 
-	vht_cap->vht_cap.supp_mcs.tx_mcs_map = cpu_to_le16(mcs_map_result);
+	vht_cap->supp_mcs.tx_mcs_map = cpu_to_le16(mcs_map_result);
 
 	tmp = mwifiex_convert_mcsmap_to_maxrate(priv, bands, mcs_map_result);
-	vht_cap->vht_cap.supp_mcs.tx_highest = cpu_to_le16(tmp);
+	vht_cap->supp_mcs.tx_highest = cpu_to_le16(tmp);
 
 	return;
 }
@@ -197,7 +197,8 @@ int mwifiex_cmd_append_11ac_tlv(struct mwifiex_private *priv,
 		       sizeof(struct ieee_types_header),
 		       le16_to_cpu(vht_cap->header.len));
 
-		mwifiex_fill_vht_cap_tlv(priv, vht_cap, bss_desc->bss_band);
+		mwifiex_fill_vht_cap_tlv(priv, &vht_cap->vht_cap,
+					 bss_desc->bss_band);
 		*buffer += sizeof(*vht_cap);
 		ret_len += sizeof(*vht_cap);
 	}
-- 
cgit v1.2.2


From 5f6d5983394fd7b918385dbee7e4d983a7b990d9 Mon Sep 17 00:00:00 2001
From: Avinash Patil <patila@marvell.com>
Date: Fri, 7 Feb 2014 16:30:39 -0800
Subject: mwifiex: add VHT support for TDLS

During TDLS setup request/response, if HW is 11ac capable,
we add VHT Capability IEs in outgoing data frame. Also while
processing received setup request/response, we preserve peer's
11ac capability retrieved from IEs.

Patch also gets VHT parameters from config_station handlers and
sets it to FW using TDLS config command.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/11ac.c    |  83 ++++++++++++-
 drivers/net/wireless/mwifiex/11ac.h    |   2 +
 drivers/net/wireless/mwifiex/fw.h      |   5 +
 drivers/net/wireless/mwifiex/main.h    |  22 ++++
 drivers/net/wireless/mwifiex/sta_cmd.c |  20 +++
 drivers/net/wireless/mwifiex/tdls.c    | 221 ++++++++++++++++++++++++++++++++-
 6 files changed, 346 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/11ac.c b/drivers/net/wireless/mwifiex/11ac.c
index 5895bc8978a5..bb43251c18f2 100644
--- a/drivers/net/wireless/mwifiex/11ac.c
+++ b/drivers/net/wireless/mwifiex/11ac.c
@@ -108,9 +108,8 @@ mwifiex_fill_vht_cap_info(struct mwifiex_private *priv,
 				cpu_to_le32(adapter->usr_dot_11ac_dev_cap_bg);
 }
 
-static void
-mwifiex_fill_vht_cap_tlv(struct mwifiex_private *priv,
-			 struct ieee80211_vht_cap *vht_cap, u8 bands)
+void mwifiex_fill_vht_cap_tlv(struct mwifiex_private *priv,
+			      struct ieee80211_vht_cap *vht_cap, u8 bands)
 {
 	struct mwifiex_adapter *adapter = priv->adapter;
 	u16 mcs_map_user, mcs_map_resp, mcs_map_result;
@@ -305,3 +304,81 @@ void mwifiex_set_11ac_ba_params(struct mwifiex_private *priv)
 
 	return;
 }
+
+bool mwifiex_is_bss_in_11ac_mode(struct mwifiex_private *priv)
+{
+	struct mwifiex_bssdescriptor *bss_desc;
+	struct ieee80211_vht_operation *vht_oper;
+
+	bss_desc = &priv->curr_bss_params.bss_descriptor;
+	vht_oper = bss_desc->bcn_vht_oper;
+
+	if (!bss_desc->bcn_vht_cap || !vht_oper)
+		return false;
+
+	if (vht_oper->chan_width == IEEE80211_VHT_CHANWIDTH_USE_HT)
+		return false;
+
+	return true;
+}
+
+u8 mwifiex_get_center_freq_index(struct mwifiex_private *priv, u8 band,
+				 u32 pri_chan, u8 chan_bw)
+{
+	u8 center_freq_idx = 0;
+
+	if (band & BAND_AAC) {
+		switch (pri_chan) {
+		case 36:
+		case 40:
+		case 44:
+		case 48:
+			if (chan_bw == IEEE80211_VHT_CHANWIDTH_80MHZ)
+				center_freq_idx = 42;
+			break;
+		case 52:
+		case 56:
+		case 60:
+		case 64:
+			if (chan_bw == IEEE80211_VHT_CHANWIDTH_80MHZ)
+				center_freq_idx = 58;
+			else if (chan_bw == IEEE80211_VHT_CHANWIDTH_160MHZ)
+				center_freq_idx = 50;
+			break;
+		case 100:
+		case 104:
+		case 108:
+		case 112:
+			if (chan_bw == IEEE80211_VHT_CHANWIDTH_80MHZ)
+				center_freq_idx = 106;
+			break;
+		case 116:
+		case 120:
+		case 124:
+		case 128:
+			if (chan_bw == IEEE80211_VHT_CHANWIDTH_80MHZ)
+				center_freq_idx = 122;
+			else if (chan_bw == IEEE80211_VHT_CHANWIDTH_160MHZ)
+				center_freq_idx = 114;
+			break;
+		case 132:
+		case 136:
+		case 140:
+		case 144:
+			if (chan_bw == IEEE80211_VHT_CHANWIDTH_80MHZ)
+				center_freq_idx = 138;
+			break;
+		case 149:
+		case 153:
+		case 157:
+		case 161:
+			if (chan_bw == IEEE80211_VHT_CHANWIDTH_80MHZ)
+				center_freq_idx = 155;
+			break;
+		default:
+			center_freq_idx = 42;
+		}
+	}
+
+	return center_freq_idx;
+}
diff --git a/drivers/net/wireless/mwifiex/11ac.h b/drivers/net/wireless/mwifiex/11ac.h
index 7c2c69b5b3eb..0b02cb6cfcb4 100644
--- a/drivers/net/wireless/mwifiex/11ac.h
+++ b/drivers/net/wireless/mwifiex/11ac.h
@@ -40,4 +40,6 @@ int mwifiex_cmd_append_11ac_tlv(struct mwifiex_private *priv,
 int mwifiex_cmd_11ac_cfg(struct mwifiex_private *priv,
 			 struct host_cmd_ds_command *cmd, u16 cmd_action,
 			 struct mwifiex_11ac_vht_cfg *cfg);
+void mwifiex_fill_vht_cap_tlv(struct mwifiex_private *priv,
+			      struct ieee80211_vht_cap *vht_cap, u8 bands);
 #endif /* _MWIFIEX_11AC_H_ */
diff --git a/drivers/net/wireless/mwifiex/fw.h b/drivers/net/wireless/mwifiex/fw.h
index 8c119bc93899..2344abdeaf6d 100644
--- a/drivers/net/wireless/mwifiex/fw.h
+++ b/drivers/net/wireless/mwifiex/fw.h
@@ -1356,6 +1356,11 @@ struct mwifiex_ie_types_vhtcap {
 	struct ieee80211_vht_cap vht_cap;
 } __packed;
 
+struct mwifiex_ie_types_aid {
+	struct mwifiex_ie_types_header header;
+	__le16 aid;
+} __packed;
+
 struct mwifiex_ie_types_oper_mode_ntf {
 	struct mwifiex_ie_types_header header;
 	u8 oper_mode;
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index 6d49d99045c0..91df7ee4c612 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -273,6 +273,21 @@ struct ieee_types_extcap {
 	u8 ext_capab[8];
 } __packed;
 
+struct ieee_types_vht_cap {
+	struct ieee_types_header ieee_hdr;
+	struct ieee80211_vht_cap vhtcap;
+} __packed;
+
+struct ieee_types_vht_oper {
+	struct ieee_types_header ieee_hdr;
+	struct ieee80211_vht_operation vhtoper;
+} __packed;
+
+struct ieee_types_aid {
+	struct ieee_types_header ieee_hdr;
+	u16 aid;
+} __packed;
+
 struct mwifiex_bssdescriptor {
 	u8 mac_address[ETH_ALEN];
 	struct cfg80211_ssid ssid;
@@ -603,10 +618,13 @@ struct mwifiex_tdls_capab {
 	u8 rates_len;
 	u8 qos_info;
 	u8 coex_2040;
+	u16 aid;
 	struct ieee80211_ht_cap ht_capb;
 	struct ieee80211_ht_operation ht_oper;
 	struct ieee_types_extcap extcap;
 	struct ieee_types_generic rsn_ie;
+	struct ieee80211_vht_cap vhtcap;
+	struct ieee80211_vht_operation vhtoper;
 };
 
 /* This is AP/TDLS specific structure which stores information
@@ -617,6 +635,7 @@ struct mwifiex_sta_node {
 	u8 mac_addr[ETH_ALEN];
 	u8 is_wmm_enabled;
 	u8 is_11n_enabled;
+	u8 is_11ac_enabled;
 	u8 ampdu_sta[MAX_NUM_TID];
 	u16 rx_seq[MAX_NUM_TID];
 	u16 max_amsdu;
@@ -1215,6 +1234,9 @@ void mwifiex_process_tdls_action_frame(struct mwifiex_private *priv,
 				       u8 *buf, int len);
 int mwifiex_tdls_oper(struct mwifiex_private *priv, u8 *peer, u8 action);
 int mwifiex_get_tdls_link_status(struct mwifiex_private *priv, u8 *mac);
+bool mwifiex_is_bss_in_11ac_mode(struct mwifiex_private *priv);
+u8 mwifiex_get_center_freq_index(struct mwifiex_private *priv, u8 band,
+				 u32 pri_chan, u8 chan_bw);
 
 #ifdef CONFIG_DEBUG_FS
 void mwifiex_debugfs_init(void);
diff --git a/drivers/net/wireless/mwifiex/sta_cmd.c b/drivers/net/wireless/mwifiex/sta_cmd.c
index 8f1bcc3255dd..b10425c80555 100644
--- a/drivers/net/wireless/mwifiex/sta_cmd.c
+++ b/drivers/net/wireless/mwifiex/sta_cmd.c
@@ -1292,6 +1292,8 @@ mwifiex_cmd_tdls_oper(struct mwifiex_private *priv,
 	struct mwifiex_ie_types_htcap *ht_capab;
 	struct mwifiex_ie_types_qos_info *wmm_qos_info;
 	struct mwifiex_ie_types_extcap *extcap;
+	struct mwifiex_ie_types_vhtcap *vht_capab;
+	struct mwifiex_ie_types_aid *aid;
 	u8 *pos, qos_info;
 	u16 config_len = 0;
 	struct station_parameters *params = priv->sta_params;
@@ -1370,6 +1372,24 @@ mwifiex_cmd_tdls_oper(struct mwifiex_private *priv,
 			config_len += sizeof(struct mwifiex_ie_types_extcap) +
 				      params->ext_capab_len;
 		}
+		if (params->vht_capa) {
+			vht_capab = (struct mwifiex_ie_types_vhtcap *)(pos +
+								    config_len);
+			vht_capab->header.type =
+					   cpu_to_le16(WLAN_EID_VHT_CAPABILITY);
+			vht_capab->header.len =
+				  cpu_to_le16(sizeof(struct ieee80211_vht_cap));
+			memcpy(&vht_capab->vht_cap, params->vht_capa,
+			       sizeof(struct ieee80211_vht_cap));
+			config_len += sizeof(struct mwifiex_ie_types_vhtcap);
+		}
+		if (params->aid) {
+			aid = (struct mwifiex_ie_types_aid *)(pos + config_len);
+			aid->header.type = cpu_to_le16(WLAN_EID_AID);
+			aid->header.len = cpu_to_le16(sizeof(params->aid));
+			aid->aid = cpu_to_le16(params->aid);
+			config_len += sizeof(struct mwifiex_ie_types_aid);
+		}
 
 		break;
 	default:
diff --git a/drivers/net/wireless/mwifiex/tdls.c b/drivers/net/wireless/mwifiex/tdls.c
index 243beaba9160..770dcd727b5c 100644
--- a/drivers/net/wireless/mwifiex/tdls.c
+++ b/drivers/net/wireless/mwifiex/tdls.c
@@ -19,6 +19,7 @@
 #include "wmm.h"
 #include "11n.h"
 #include "11n_rxreorder.h"
+#include "11ac.h"
 
 #define TDLS_REQ_FIX_LEN      6
 #define TDLS_RESP_FIX_LEN     8
@@ -151,7 +152,156 @@ mwifiex_tdls_append_rates_ie(struct mwifiex_private *priv,
 	return 0;
 }
 
-static void mwifiex_tdls_add_ext_capab(struct sk_buff *skb)
+static void mwifiex_tdls_add_aid(struct mwifiex_private *priv,
+				struct sk_buff *skb)
+{
+	struct ieee_types_assoc_rsp *assoc_rsp;
+	u8 *pos;
+
+	assoc_rsp = (struct ieee_types_assoc_rsp *)&priv->assoc_rsp_buf;
+	pos = (void *)skb_put(skb, 4);
+	*pos++ = WLAN_EID_AID;
+	*pos++ = 2;
+	*pos++ = le16_to_cpu(assoc_rsp->a_id);
+
+	return;
+}
+
+static int mwifiex_tdls_add_vht_capab(struct mwifiex_private *priv,
+				      struct sk_buff *skb)
+{
+	struct ieee80211_vht_cap vht_cap;
+	u8 *pos;
+
+	pos = (void *)skb_put(skb, sizeof(struct ieee80211_vht_cap) + 2);
+	*pos++ = WLAN_EID_VHT_CAPABILITY;
+	*pos++ = sizeof(struct ieee80211_vht_cap);
+
+	memset(&vht_cap, 0, sizeof(struct ieee80211_vht_cap));
+
+	mwifiex_fill_vht_cap_tlv(priv, &vht_cap, priv->curr_bss_params.band);
+	memcpy(pos, &vht_cap, sizeof(struct ieee80211_ht_cap));
+
+	return 0;
+}
+
+static int mwifiex_tdls_add_vht_oper(struct mwifiex_private *priv,
+				     u8 *mac, struct sk_buff *skb)
+{
+	struct mwifiex_bssdescriptor *bss_desc;
+	struct ieee80211_vht_operation *vht_oper;
+	struct ieee80211_vht_cap *vht_cap, *ap_vht_cap = NULL;
+	struct mwifiex_sta_node *sta_ptr;
+	struct mwifiex_adapter *adapter = priv->adapter;
+	u8 supp_chwd_set, peer_supp_chwd_set;
+	u8 *pos, ap_supp_chwd_set, chan_bw;
+	u16 mcs_map_user, mcs_map_resp, mcs_map_result;
+	u16 mcs_user, mcs_resp, nss;
+	u32 usr_vht_cap_info;
+
+	bss_desc = &priv->curr_bss_params.bss_descriptor;
+
+	sta_ptr = mwifiex_get_sta_entry(priv, mac);
+	if (unlikely(!sta_ptr)) {
+		dev_warn(adapter->dev, "TDLS peer station not found in list\n");
+		return -1;
+	}
+
+	if (!mwifiex_is_bss_in_11ac_mode(priv)) {
+		if (sta_ptr->tdls_cap.extcap.ext_capab[7] &
+		   WLAN_EXT_CAPA8_TDLS_WIDE_BW_ENABLED) {
+			dev_dbg(adapter->dev,
+				"TDLS peer doesn't support wider bandwitdh\n");
+			return 0;
+		}
+	} else {
+		ap_vht_cap = bss_desc->bcn_vht_cap;
+	}
+
+	pos = (void *)skb_put(skb, sizeof(struct ieee80211_vht_operation) + 2);
+	*pos++ = WLAN_EID_VHT_OPERATION;
+	*pos++ = sizeof(struct ieee80211_vht_operation);
+	vht_oper = (struct ieee80211_vht_operation *)pos;
+
+	if (bss_desc->bss_band & BAND_A)
+		usr_vht_cap_info = adapter->usr_dot_11ac_dev_cap_a;
+	else
+		usr_vht_cap_info = adapter->usr_dot_11ac_dev_cap_bg;
+
+	/* find the minmum bandwith between AP/TDLS peers */
+	vht_cap = &sta_ptr->tdls_cap.vhtcap;
+	supp_chwd_set = GET_VHTCAP_CHWDSET(usr_vht_cap_info);
+	peer_supp_chwd_set =
+			 GET_VHTCAP_CHWDSET(le32_to_cpu(vht_cap->vht_cap_info));
+	supp_chwd_set = min_t(u8, supp_chwd_set, peer_supp_chwd_set);
+
+	/* We need check AP's bandwidth when TDLS_WIDER_BANDWIDTH is off */
+
+	if (ap_vht_cap && sta_ptr->tdls_cap.extcap.ext_capab[7] &
+	    WLAN_EXT_CAPA8_TDLS_WIDE_BW_ENABLED) {
+		ap_supp_chwd_set =
+		      GET_VHTCAP_CHWDSET(le32_to_cpu(ap_vht_cap->vht_cap_info));
+		supp_chwd_set = min_t(u8, supp_chwd_set, ap_supp_chwd_set);
+	}
+
+	switch (supp_chwd_set) {
+	case IEEE80211_VHT_CHANWIDTH_80MHZ:
+		vht_oper->chan_width = IEEE80211_VHT_CHANWIDTH_80MHZ;
+		break;
+	case IEEE80211_VHT_CHANWIDTH_160MHZ:
+		vht_oper->chan_width = IEEE80211_VHT_CHANWIDTH_160MHZ;
+		break;
+	case IEEE80211_VHT_CHANWIDTH_80P80MHZ:
+		vht_oper->chan_width = IEEE80211_VHT_CHANWIDTH_80P80MHZ;
+		break;
+	default:
+		vht_oper->chan_width = IEEE80211_VHT_CHANWIDTH_USE_HT;
+		break;
+	}
+
+	mcs_map_user = GET_DEVRXMCSMAP(adapter->usr_dot_11ac_mcs_support);
+	mcs_map_resp = le16_to_cpu(vht_cap->supp_mcs.rx_mcs_map);
+	mcs_map_result = 0;
+
+	for (nss = 1; nss <= 8; nss++) {
+		mcs_user = GET_VHTNSSMCS(mcs_map_user, nss);
+		mcs_resp = GET_VHTNSSMCS(mcs_map_resp, nss);
+
+		if ((mcs_user == IEEE80211_VHT_MCS_NOT_SUPPORTED) ||
+		    (mcs_resp == IEEE80211_VHT_MCS_NOT_SUPPORTED))
+			SET_VHTNSSMCS(mcs_map_result, nss,
+				      IEEE80211_VHT_MCS_NOT_SUPPORTED);
+		else
+			SET_VHTNSSMCS(mcs_map_result, nss,
+				      min_t(u16, mcs_user, mcs_resp));
+	}
+
+	vht_oper->basic_mcs_set = cpu_to_le16(mcs_map_result);
+
+	switch (vht_oper->chan_width) {
+	case IEEE80211_VHT_CHANWIDTH_80MHZ:
+		chan_bw = IEEE80211_VHT_CHANWIDTH_80MHZ;
+		break;
+	case IEEE80211_VHT_CHANWIDTH_160MHZ:
+		chan_bw = IEEE80211_VHT_CHANWIDTH_160MHZ;
+		break;
+	case IEEE80211_VHT_CHANWIDTH_80P80MHZ:
+		chan_bw = IEEE80211_VHT_CHANWIDTH_80MHZ;
+		break;
+	default:
+		chan_bw = IEEE80211_VHT_CHANWIDTH_USE_HT;
+		break;
+	}
+	vht_oper->center_freq_seg1_idx =
+			mwifiex_get_center_freq_index(priv, BAND_AAC,
+						      bss_desc->channel,
+						      chan_bw);
+
+	return 0;
+}
+
+static void mwifiex_tdls_add_ext_capab(struct mwifiex_private *priv,
+				       struct sk_buff *skb)
 {
 	struct ieee_types_extcap *extcap;
 
@@ -160,6 +310,9 @@ static void mwifiex_tdls_add_ext_capab(struct sk_buff *skb)
 	extcap->ieee_hdr.len = 8;
 	memset(extcap->ext_capab, 0, 8);
 	extcap->ext_capab[4] |= WLAN_EXT_CAPA5_TDLS_ENABLED;
+
+	if (priv->adapter->is_hw_11ac_capable)
+		extcap->ext_capab[7] |= WLAN_EXT_CAPA8_TDLS_WIDE_BW_ENABLED;
 }
 
 static void mwifiex_tdls_add_qos_capab(struct sk_buff *skb)
@@ -213,7 +366,16 @@ static int mwifiex_prep_tdls_encap_data(struct mwifiex_private *priv,
 			return ret;
 		}
 
-		mwifiex_tdls_add_ext_capab(skb);
+		if (priv->adapter->is_hw_11ac_capable) {
+			ret = mwifiex_tdls_add_vht_capab(priv, skb);
+			if (ret) {
+				dev_kfree_skb_any(skb);
+				return ret;
+			}
+			mwifiex_tdls_add_aid(priv, skb);
+		}
+
+		mwifiex_tdls_add_ext_capab(priv, skb);
 		mwifiex_tdls_add_qos_capab(skb);
 		break;
 
@@ -241,7 +403,16 @@ static int mwifiex_prep_tdls_encap_data(struct mwifiex_private *priv,
 			return ret;
 		}
 
-		mwifiex_tdls_add_ext_capab(skb);
+		if (priv->adapter->is_hw_11ac_capable) {
+			ret = mwifiex_tdls_add_vht_capab(priv, skb);
+			if (ret) {
+				dev_kfree_skb_any(skb);
+				return ret;
+			}
+			mwifiex_tdls_add_aid(priv, skb);
+		}
+
+		mwifiex_tdls_add_ext_capab(priv, skb);
 		mwifiex_tdls_add_qos_capab(skb);
 		break;
 
@@ -251,6 +422,13 @@ static int mwifiex_prep_tdls_encap_data(struct mwifiex_private *priv,
 		skb_put(skb, sizeof(tf->u.setup_cfm));
 		tf->u.setup_cfm.status_code = cpu_to_le16(status_code);
 		tf->u.setup_cfm.dialog_token = dialog_token;
+		if (priv->adapter->is_hw_11ac_capable) {
+			ret = mwifiex_tdls_add_vht_oper(priv, peer, skb);
+			if (ret) {
+				dev_kfree_skb_any(skb);
+				return ret;
+			}
+		}
 		break;
 
 	case WLAN_TDLS_TEARDOWN:
@@ -313,6 +491,11 @@ int mwifiex_send_tdls_data_frame(struct mwifiex_private *priv,
 		  sizeof(struct ieee80211_tdls_lnkie) +
 		  extra_ies_len;
 
+	if (priv->adapter->is_hw_11ac_capable)
+		skb_len += sizeof(struct ieee_types_vht_cap) +
+			   sizeof(struct ieee_types_vht_oper) +
+			   sizeof(struct ieee_types_aid);
+
 	skb = dev_alloc_skb(skb_len);
 	if (!skb) {
 		dev_err(priv->adapter->dev,
@@ -435,7 +618,16 @@ mwifiex_construct_tdls_action_frame(struct mwifiex_private *priv, u8 *peer,
 			return ret;
 		}
 
-		mwifiex_tdls_add_ext_capab(skb);
+		if (priv->adapter->is_hw_11ac_capable) {
+			ret = mwifiex_tdls_add_vht_capab(priv, skb);
+			if (ret) {
+				dev_kfree_skb_any(skb);
+				return ret;
+			}
+			mwifiex_tdls_add_aid(priv, skb);
+		}
+
+		mwifiex_tdls_add_ext_capab(priv, skb);
 		mwifiex_tdls_add_qos_capab(skb);
 		break;
 	default:
@@ -472,6 +664,11 @@ int mwifiex_send_tdls_action_frame(struct mwifiex_private *priv,
 		  3 + /* Qos Info */
 		  ETH_ALEN; /* Address4 */
 
+	if (priv->adapter->is_hw_11ac_capable)
+		skb_len += sizeof(struct ieee_types_vht_cap) +
+			   sizeof(struct ieee_types_vht_oper) +
+			   sizeof(struct ieee_types_aid);
+
 	skb = dev_alloc_skb(skb_len);
 	if (!skb) {
 		dev_err(priv->adapter->dev,
@@ -626,6 +823,22 @@ void mwifiex_process_tdls_action_frame(struct mwifiex_private *priv,
 		case WLAN_EID_QOS_CAPA:
 			sta_ptr->tdls_cap.qos_info = pos[2];
 			break;
+		case WLAN_EID_VHT_OPERATION:
+			if (priv->adapter->is_hw_11ac_capable)
+				memcpy(&sta_ptr->tdls_cap.vhtoper, pos,
+				       sizeof(struct ieee80211_vht_operation));
+			break;
+		case WLAN_EID_VHT_CAPABILITY:
+			if (priv->adapter->is_hw_11ac_capable) {
+				memcpy((u8 *)&sta_ptr->tdls_cap.vhtcap, pos,
+				       sizeof(struct ieee80211_vht_cap));
+				sta_ptr->is_11ac_enabled = 1;
+			}
+			break;
+		case WLAN_EID_AID:
+			if (priv->adapter->is_hw_11ac_capable)
+				sta_ptr->tdls_cap.aid =
+					      le16_to_cpu(*(__le16 *)(pos + 2));
 		default:
 			break;
 		}
-- 
cgit v1.2.2


From b06c5321141382e72790077ef0caa1e42b69ff2d Mon Sep 17 00:00:00 2001
From: Avinash Patil <patila@marvell.com>
Date: Fri, 7 Feb 2014 16:30:40 -0800
Subject: mwifiex: separate BA params for TDLS link if 11ac is supported

If TDLS link is 11ac enabled i.e. we as well as peer station
supports VHT, configure seprate TX & RX window sizes during
BA setup. So even if BSS does not support 11ac, we can use VHT
capabilities and higher window sizes on direct link.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/11n.c           | 22 +++++++++++++++++++---
 drivers/net/wireless/mwifiex/11n_rxreorder.c | 21 +++++++++++++++++++--
 2 files changed, 38 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/11n.c b/drivers/net/wireless/mwifiex/11n.c
index 616b1d6221b9..37677af8d2fc 100644
--- a/drivers/net/wireless/mwifiex/11n.c
+++ b/drivers/net/wireless/mwifiex/11n.c
@@ -537,16 +537,32 @@ void mwifiex_create_ba_tbl(struct mwifiex_private *priv, u8 *ra, int tid,
 int mwifiex_send_addba(struct mwifiex_private *priv, int tid, u8 *peer_mac)
 {
 	struct host_cmd_ds_11n_addba_req add_ba_req;
+	struct mwifiex_sta_node *sta_ptr;
+	u32 tx_win_size = priv->add_ba_param.tx_win_size;
 	static u8 dialog_tok;
 	int ret;
 
 	dev_dbg(priv->adapter->dev, "cmd: %s: tid %d\n", __func__, tid);
 
+	if ((GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_STA) &&
+	    ISSUPP_TDLS_ENABLED(priv->adapter->fw_cap_info) &&
+	    priv->adapter->is_hw_11ac_capable &&
+	    memcmp(priv->cfg_bssid, peer_mac, ETH_ALEN)) {
+		sta_ptr = mwifiex_get_sta_entry(priv, peer_mac);
+		if (!sta_ptr) {
+			dev_warn(priv->adapter->dev,
+				 "BA setup with unknown TDLS peer %pM!\n",
+				peer_mac);
+			return -1;
+		}
+		if (sta_ptr->is_11ac_enabled)
+			tx_win_size = MWIFIEX_11AC_STA_AMPDU_DEF_TXWINSIZE;
+	}
+
 	add_ba_req.block_ack_param_set = cpu_to_le16(
 		(u16) ((tid << BLOCKACKPARAM_TID_POS) |
-			 (priv->add_ba_param.
-			  tx_win_size << BLOCKACKPARAM_WINSIZE_POS) |
-			 IMMEDIATE_BLOCK_ACK));
+		       tx_win_size << BLOCKACKPARAM_WINSIZE_POS |
+		       IMMEDIATE_BLOCK_ACK));
 	add_ba_req.block_ack_tmo = cpu_to_le16((u16)priv->add_ba_param.timeout);
 
 	++dialog_tok;
diff --git a/drivers/net/wireless/mwifiex/11n_rxreorder.c b/drivers/net/wireless/mwifiex/11n_rxreorder.c
index 3767399576b3..b361257fb65e 100644
--- a/drivers/net/wireless/mwifiex/11n_rxreorder.c
+++ b/drivers/net/wireless/mwifiex/11n_rxreorder.c
@@ -362,10 +362,28 @@ int mwifiex_cmd_11n_addba_rsp_gen(struct mwifiex_private *priv,
 				  *cmd_addba_req)
 {
 	struct host_cmd_ds_11n_addba_rsp *add_ba_rsp = &cmd->params.add_ba_rsp;
+	struct mwifiex_sta_node *sta_ptr;
+	u32 rx_win_size = priv->add_ba_param.rx_win_size;
 	u8 tid;
 	int win_size;
 	uint16_t block_ack_param_set;
 
+	if ((GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_STA) &&
+	    ISSUPP_TDLS_ENABLED(priv->adapter->fw_cap_info) &&
+	    priv->adapter->is_hw_11ac_capable &&
+	    memcmp(priv->cfg_bssid, cmd_addba_req->peer_mac_addr, ETH_ALEN)) {
+		sta_ptr = mwifiex_get_sta_entry(priv,
+						cmd_addba_req->peer_mac_addr);
+		if (!sta_ptr) {
+			dev_warn(priv->adapter->dev,
+				 "BA setup with unknown TDLS peer %pM!\n",
+				 cmd_addba_req->peer_mac_addr);
+			return -1;
+		}
+		if (sta_ptr->is_11ac_enabled)
+			rx_win_size = MWIFIEX_11AC_STA_AMPDU_DEF_RXWINSIZE;
+	}
+
 	cmd->command = cpu_to_le16(HostCmd_CMD_11N_ADDBA_RSP);
 	cmd->size = cpu_to_le16(sizeof(*add_ba_rsp) + S_DS_GEN);
 
@@ -382,8 +400,7 @@ int mwifiex_cmd_11n_addba_rsp_gen(struct mwifiex_private *priv,
 	block_ack_param_set &= ~IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK;
 	/* We donot support AMSDU inside AMPDU, hence reset the bit */
 	block_ack_param_set &= ~BLOCKACKPARAM_AMSDU_SUPP_MASK;
-	block_ack_param_set |= (priv->add_ba_param.rx_win_size <<
-					     BLOCKACKPARAM_WINSIZE_POS);
+	block_ack_param_set |= rx_win_size << BLOCKACKPARAM_WINSIZE_POS;
 	add_ba_rsp->block_ack_param_set = cpu_to_le16(block_ack_param_set);
 	win_size = (le16_to_cpu(add_ba_rsp->block_ack_param_set)
 					& IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK)
-- 
cgit v1.2.2


From be104b916caf36af7e664b61149389b96c1c0ff6 Mon Sep 17 00:00:00 2001
From: Avinash Patil <patila@marvell.com>
Date: Fri, 7 Feb 2014 16:30:41 -0800
Subject: mwifiex: disable all TDLS link during disconnection

During deauthenticate/link lost event, disable all TDLS links as
TDLS would not work when infra connection is not active.
Also this will avoid an issue where ping to peer station doesn't
work after reassociation to AP where we had created TDLS link in
earlier association.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/main.h      |  1 +
 drivers/net/wireless/mwifiex/sta_event.c |  4 ++++
 drivers/net/wireless/mwifiex/tdls.c      | 35 ++++++++++++++++++++++++++++++++
 3 files changed, 40 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index 91df7ee4c612..82754ed94a8a 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -1234,6 +1234,7 @@ void mwifiex_process_tdls_action_frame(struct mwifiex_private *priv,
 				       u8 *buf, int len);
 int mwifiex_tdls_oper(struct mwifiex_private *priv, u8 *peer, u8 action);
 int mwifiex_get_tdls_link_status(struct mwifiex_private *priv, u8 *mac);
+void mwifiex_disable_all_tdls_links(struct mwifiex_private *priv);
 bool mwifiex_is_bss_in_11ac_mode(struct mwifiex_private *priv);
 u8 mwifiex_get_center_freq_index(struct mwifiex_private *priv, u8 band,
 				 u32 pri_chan, u8 chan_bw);
diff --git a/drivers/net/wireless/mwifiex/sta_event.c b/drivers/net/wireless/mwifiex/sta_event.c
index de4a6affe72e..92ff7b324b00 100644
--- a/drivers/net/wireless/mwifiex/sta_event.c
+++ b/drivers/net/wireless/mwifiex/sta_event.c
@@ -54,6 +54,10 @@ mwifiex_reset_connect_state(struct mwifiex_private *priv, u16 reason_code)
 
 	priv->scan_block = false;
 
+	if ((GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_STA) &&
+	    ISSUPP_TDLS_ENABLED(priv->adapter->fw_cap_info))
+		mwifiex_disable_all_tdls_links(priv);
+
 	/* Free Tx and Rx packets, report disconnect to upper layer */
 	mwifiex_clean_txrx(priv);
 
diff --git a/drivers/net/wireless/mwifiex/tdls.c b/drivers/net/wireless/mwifiex/tdls.c
index 770dcd727b5c..5efd456af571 100644
--- a/drivers/net/wireless/mwifiex/tdls.c
+++ b/drivers/net/wireless/mwifiex/tdls.c
@@ -1007,3 +1007,38 @@ int mwifiex_get_tdls_link_status(struct mwifiex_private *priv, u8 *mac)
 
 	return TDLS_NOT_SETUP;
 }
+
+void mwifiex_disable_all_tdls_links(struct mwifiex_private *priv)
+{
+	struct mwifiex_sta_node *sta_ptr;
+	struct mwifiex_ds_tdls_oper tdls_oper;
+	unsigned long flags;
+
+	if (list_empty(&priv->sta_list))
+		return;
+
+	list_for_each_entry(sta_ptr, &priv->sta_list, list) {
+		memset(&tdls_oper, 0, sizeof(struct mwifiex_ds_tdls_oper));
+
+		if (sta_ptr->is_11n_enabled) {
+			mwifiex_11n_cleanup_reorder_tbl(priv);
+			spin_lock_irqsave(&priv->wmm.ra_list_spinlock,
+					  flags);
+			mwifiex_11n_delete_all_tx_ba_stream_tbl(priv);
+			spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock,
+					       flags);
+		}
+
+		mwifiex_restore_tdls_packets(priv, sta_ptr->mac_addr,
+					     TDLS_LINK_TEARDOWN);
+		memcpy(&tdls_oper.peer_mac, sta_ptr->mac_addr, ETH_ALEN);
+		tdls_oper.tdls_action = MWIFIEX_TDLS_DISABLE_LINK;
+		if (mwifiex_send_cmd_async(priv, HostCmd_CMD_TDLS_OPER,
+					   HostCmd_ACT_GEN_SET, 0, &tdls_oper))
+			dev_warn(priv->adapter->dev,
+				 "Disable link failed for TDLS peer %pM",
+				 sta_ptr->mac_addr);
+	}
+
+	mwifiex_del_all_sta_list(priv);
+}
-- 
cgit v1.2.2


From 7f445d0435017ba0daeb83574028fc16c68df1f5 Mon Sep 17 00:00:00 2001
From: Avinash Patil <patila@marvell.com>
Date: Fri, 7 Feb 2014 16:30:42 -0800
Subject: mwifiex: parse API version from FW

This patch adds support to parse FW API version TLVs.
Currently only API version for key_material is supported.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/cmdevt.c | 45 ++++++++++++++++++++++++++++++++++-
 drivers/net/wireless/mwifiex/fw.h     | 13 ++++++++++
 drivers/net/wireless/mwifiex/init.c   |  2 ++
 drivers/net/wireless/mwifiex/main.h   |  1 +
 4 files changed, 60 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c
index 7711b11a9812..21544602043c 100644
--- a/drivers/net/wireless/mwifiex/cmdevt.c
+++ b/drivers/net/wireless/mwifiex/cmdevt.c
@@ -1455,7 +1455,10 @@ int mwifiex_ret_get_hw_spec(struct mwifiex_private *priv,
 {
 	struct host_cmd_ds_get_hw_spec *hw_spec = &resp->params.hw_spec;
 	struct mwifiex_adapter *adapter = priv->adapter;
-	int i;
+	struct mwifiex_ie_types_header *tlv;
+	struct hw_spec_fw_api_rev *api_rev;
+	u16 resp_size, api_id;
+	int i, left_len, parsed_len = 0;
 
 	adapter->fw_cap_info = le32_to_cpu(hw_spec->fw_cap_info);
 
@@ -1513,6 +1516,46 @@ int mwifiex_ret_get_hw_spec(struct mwifiex_private *priv,
 		adapter->is_hw_11ac_capable = false;
 	}
 
+	resp_size = le16_to_cpu(resp->size) - S_DS_GEN;
+	if (resp_size > sizeof(struct host_cmd_ds_get_hw_spec)) {
+		/* we have variable HW SPEC information */
+		left_len = resp_size - sizeof(struct host_cmd_ds_get_hw_spec);
+		while (left_len > sizeof(struct mwifiex_ie_types_header)) {
+			tlv = (void *)&hw_spec->tlvs + parsed_len;
+			switch (le16_to_cpu(tlv->type)) {
+			case TLV_TYPE_FW_API_REV:
+				api_rev = (struct hw_spec_fw_api_rev *)tlv;
+				api_id = le16_to_cpu(api_rev->api_id);
+				switch (api_id) {
+				case KEY_API_VER_ID:
+					adapter->fw_key_api_major_ver =
+							api_rev->major_ver;
+					adapter->fw_key_api_minor_ver =
+							api_rev->minor_ver;
+					dev_dbg(adapter->dev,
+						"fw_key_api v%d.%d\n",
+						adapter->fw_key_api_major_ver,
+						adapter->fw_key_api_minor_ver);
+					break;
+				default:
+					dev_warn(adapter->dev,
+						 "Unknown FW api_id: %d\n",
+						 api_id);
+					break;
+				}
+				break;
+			default:
+				dev_warn(adapter->dev,
+					 "Unknown GET_HW_SPEC TLV type: %#x\n",
+					 le16_to_cpu(tlv->type));
+				break;
+			}
+			parsed_len += le16_to_cpu(tlv->len) +
+				      sizeof(struct mwifiex_ie_types_header);
+			left_len -= parsed_len;
+		}
+	}
+
 	dev_dbg(adapter->dev, "info: GET_HW_SPEC: fw_release_number- %#x\n",
 		adapter->fw_release_number);
 	dev_dbg(adapter->dev, "info: GET_HW_SPEC: permanent addr: %pM\n",
diff --git a/drivers/net/wireless/mwifiex/fw.h b/drivers/net/wireless/mwifiex/fw.h
index 2344abdeaf6d..5808f238f1cd 100644
--- a/drivers/net/wireless/mwifiex/fw.h
+++ b/drivers/net/wireless/mwifiex/fw.h
@@ -159,6 +159,7 @@ enum MWIFIEX_802_11_PRIVACY_FILTER {
 #define TLV_TYPE_PWK_CIPHER         (PROPRIETARY_TLV_BASE_ID + 145)
 #define TLV_TYPE_GWK_CIPHER         (PROPRIETARY_TLV_BASE_ID + 146)
 #define TLV_TYPE_COALESCE_RULE      (PROPRIETARY_TLV_BASE_ID + 154)
+#define TLV_TYPE_FW_API_REV         (PROPRIETARY_TLV_BASE_ID + 199)
 
 #define MWIFIEX_TX_DATA_BUF_SIZE_2K        2048
 
@@ -751,6 +752,17 @@ struct host_cmd_ds_802_11_ps_mode_enh {
 	} params;
 } __packed;
 
+enum FW_API_VER_ID {
+	KEY_API_VER_ID = 1,
+};
+
+struct hw_spec_fw_api_rev {
+	struct mwifiex_ie_types_header header;
+	__le16 api_id;
+	u8 major_ver;
+	u8 minor_ver;
+} __packed;
+
 struct host_cmd_ds_get_hw_spec {
 	__le16 hw_if_version;
 	__le16 version;
@@ -772,6 +784,7 @@ struct host_cmd_ds_get_hw_spec {
 	__le32 reserved_6;
 	__le32 dot_11ac_dev_cap;
 	__le32 dot_11ac_mcs_support;
+	u8 tlvs[0];
 } __packed;
 
 struct host_cmd_ds_802_11_rssi_info {
diff --git a/drivers/net/wireless/mwifiex/init.c b/drivers/net/wireless/mwifiex/init.c
index 9dc8059778a0..a4cd2cb066ed 100644
--- a/drivers/net/wireless/mwifiex/init.c
+++ b/drivers/net/wireless/mwifiex/init.c
@@ -283,6 +283,8 @@ static void mwifiex_init_adapter(struct mwifiex_adapter *adapter)
 	adapter->max_mgmt_ie_index = MAX_MGMT_IE_INDEX;
 	adapter->empty_tx_q_cnt = 0;
 	adapter->ext_scan = true;
+	adapter->fw_key_api_major_ver = 0;
+	adapter->fw_key_api_minor_ver = 0;
 }
 
 /*
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index 82754ed94a8a..de115fa745cb 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -801,6 +801,7 @@ struct mwifiex_adapter {
 	atomic_t pending_bridged_pkts;
 	struct semaphore *card_sem;
 	bool ext_scan;
+	u8 fw_key_api_major_ver, fw_key_api_minor_ver;
 };
 
 int mwifiex_init_lock_list(struct mwifiex_adapter *adapter);
-- 
cgit v1.2.2


From e57f1734d87aa0e9a00905ed08888f0c62f56227 Mon Sep 17 00:00:00 2001
From: Avinash Patil <patila@marvell.com>
Date: Fri, 7 Feb 2014 16:32:35 -0800
Subject: mwifiex: add key material v2 support

This patch adds key material V2 support to mwifiex.
Newer FW supports this feature and FW KEY API version is used
to determine which command structure needs to be used.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/fw.h          |  63 +++++++-
 drivers/net/wireless/mwifiex/ioctl.h       |   3 +
 drivers/net/wireless/mwifiex/main.h        |   1 +
 drivers/net/wireless/mwifiex/sta_cmd.c     | 246 ++++++++++++++++++++++++++++-
 drivers/net/wireless/mwifiex/sta_cmdresp.c |  51 +++++-
 drivers/net/wireless/mwifiex/sta_ioctl.c   |  36 ++++-
 6 files changed, 388 insertions(+), 12 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/fw.h b/drivers/net/wireless/mwifiex/fw.h
index 5808f238f1cd..aa8abef58349 100644
--- a/drivers/net/wireless/mwifiex/fw.h
+++ b/drivers/net/wireless/mwifiex/fw.h
@@ -79,12 +79,21 @@ enum KEY_TYPE_ID {
 	KEY_TYPE_ID_WAPI,
 	KEY_TYPE_ID_AES_CMAC,
 };
+
+#define WPA_PN_SIZE		8
+#define KEY_PARAMS_FIXED_LEN	10
+#define KEY_INDEX_MASK		0xf
+#define FW_KEY_API_VER_MAJOR_V2	2
+
 #define KEY_MCAST	BIT(0)
 #define KEY_UNICAST	BIT(1)
 #define KEY_ENABLED	BIT(2)
+#define KEY_DEFAULT	BIT(3)
+#define KEY_TX_KEY	BIT(4)
+#define KEY_RX_KEY	BIT(5)
 #define KEY_IGTK	BIT(10)
 
-#define WAPI_KEY_LEN			50
+#define WAPI_KEY_LEN			(WLAN_KEY_LEN_SMS4 + PN_LEN + 2)
 
 #define MAX_POLL_TRIES			100
 #define MAX_FIRMWARE_POLL_TRIES			100
@@ -159,6 +168,7 @@ enum MWIFIEX_802_11_PRIVACY_FILTER {
 #define TLV_TYPE_PWK_CIPHER         (PROPRIETARY_TLV_BASE_ID + 145)
 #define TLV_TYPE_GWK_CIPHER         (PROPRIETARY_TLV_BASE_ID + 146)
 #define TLV_TYPE_COALESCE_RULE      (PROPRIETARY_TLV_BASE_ID + 154)
+#define TLV_TYPE_KEY_PARAM_V2       (PROPRIETARY_TLV_BASE_ID + 156)
 #define TLV_TYPE_FW_API_REV         (PROPRIETARY_TLV_BASE_ID + 199)
 
 #define MWIFIEX_TX_DATA_BUF_SIZE_2K        2048
@@ -701,6 +711,56 @@ struct mwifiex_cmac_param {
 	u8 key[WLAN_KEY_LEN_AES_CMAC];
 } __packed;
 
+struct mwifiex_wep_param {
+	__le16 key_len;
+	u8 key[WLAN_KEY_LEN_WEP104];
+} __packed;
+
+struct mwifiex_tkip_param {
+	u8 pn[WPA_PN_SIZE];
+	__le16 key_len;
+	u8 key[WLAN_KEY_LEN_TKIP];
+} __packed;
+
+struct mwifiex_aes_param {
+	u8 pn[WPA_PN_SIZE];
+	__le16 key_len;
+	u8 key[WLAN_KEY_LEN_CCMP];
+} __packed;
+
+struct mwifiex_wapi_param {
+	u8 pn[PN_LEN];
+	__le16 key_len;
+	u8 key[WLAN_KEY_LEN_SMS4];
+} __packed;
+
+struct mwifiex_cmac_aes_param {
+	u8 ipn[IGTK_PN_LEN];
+	__le16 key_len;
+	u8 key[WLAN_KEY_LEN_AES_CMAC];
+} __packed;
+
+struct mwifiex_ie_type_key_param_set_v2 {
+	__le16 type;
+	__le16 len;
+	u8 mac_addr[ETH_ALEN];
+	u8 key_idx;
+	u8 key_type;
+	__le16 key_info;
+	union {
+		struct mwifiex_wep_param wep;
+		struct mwifiex_tkip_param tkip;
+		struct mwifiex_aes_param aes;
+		struct mwifiex_wapi_param wapi;
+		struct mwifiex_cmac_aes_param cmac_aes;
+	} key_params;
+} __packed;
+
+struct host_cmd_ds_802_11_key_material_v2 {
+	__le16 action;
+	struct mwifiex_ie_type_key_param_set_v2 key_param_set;
+} __packed;
+
 struct host_cmd_ds_802_11_key_material {
 	__le16 action;
 	struct mwifiex_ie_type_key_param_set key_param_set;
@@ -1742,6 +1802,7 @@ struct host_cmd_ds_command {
 		struct host_cmd_ds_11n_cfg htcfg;
 		struct host_cmd_ds_wmm_get_status get_wmm_status;
 		struct host_cmd_ds_802_11_key_material key_material;
+		struct host_cmd_ds_802_11_key_material_v2 key_material_v2;
 		struct host_cmd_ds_version_ext verext;
 		struct host_cmd_ds_mgmt_frame_reg reg_mask;
 		struct host_cmd_ds_remain_on_chan roc_cfg;
diff --git a/drivers/net/wireless/mwifiex/ioctl.h b/drivers/net/wireless/mwifiex/ioctl.h
index 6ed1e13d7b40..5974642f38b1 100644
--- a/drivers/net/wireless/mwifiex/ioctl.h
+++ b/drivers/net/wireless/mwifiex/ioctl.h
@@ -236,7 +236,10 @@ struct mwifiex_ds_encrypt_key {
 	u8 mac_addr[ETH_ALEN];
 	u32 is_wapi_key;
 	u8 pn[PN_LEN];		/* packet number */
+	u8 pn_len;
 	u8 is_igtk_key;
+	u8 is_current_wep_key;
+	u8 is_rx_seq_valid;
 };
 
 struct mwifiex_power_cfg {
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index de115fa745cb..407f8eada720 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -469,6 +469,7 @@ struct mwifiex_private {
 	u8 wpa_ie_len;
 	u8 wpa_is_gtk_set;
 	struct host_cmd_ds_802_11_key_material aes_key;
+	struct host_cmd_ds_802_11_key_material_v2 aes_key_v2;
 	u8 wapi_ie[256];
 	u8 wapi_ie_len;
 	u8 *wps_ie;
diff --git a/drivers/net/wireless/mwifiex/sta_cmd.c b/drivers/net/wireless/mwifiex/sta_cmd.c
index b10425c80555..5aa3d39e48bc 100644
--- a/drivers/net/wireless/mwifiex/sta_cmd.c
+++ b/drivers/net/wireless/mwifiex/sta_cmd.c
@@ -532,8 +532,228 @@ mwifiex_set_keyparamset_wep(struct mwifiex_private *priv,
 	return 0;
 }
 
+/* This function populates key material v2 command
+ * to set network key for AES & CMAC AES.
+ */
+static int mwifiex_set_aes_key_v2(struct mwifiex_private *priv,
+				  struct host_cmd_ds_command *cmd,
+				  struct mwifiex_ds_encrypt_key *enc_key,
+				  struct host_cmd_ds_802_11_key_material_v2 *km)
+{
+	struct mwifiex_adapter *adapter = priv->adapter;
+	u16 size, len = KEY_PARAMS_FIXED_LEN;
+
+	if (enc_key->is_igtk_key) {
+		dev_dbg(adapter->dev, "%s: Set CMAC AES Key\n", __func__);
+		if (enc_key->is_rx_seq_valid)
+			memcpy(km->key_param_set.key_params.cmac_aes.ipn,
+			       enc_key->pn, enc_key->pn_len);
+		km->key_param_set.key_info &= cpu_to_le16(~KEY_MCAST);
+		km->key_param_set.key_info |= cpu_to_le16(KEY_IGTK);
+		km->key_param_set.key_type = KEY_TYPE_ID_AES_CMAC;
+		km->key_param_set.key_params.cmac_aes.key_len =
+					  cpu_to_le16(enc_key->key_len);
+		memcpy(km->key_param_set.key_params.cmac_aes.key,
+		       enc_key->key_material, enc_key->key_len);
+		len += sizeof(struct mwifiex_cmac_aes_param);
+	} else {
+		dev_dbg(adapter->dev, "%s: Set AES Key\n", __func__);
+		if (enc_key->is_rx_seq_valid)
+			memcpy(km->key_param_set.key_params.aes.pn,
+			       enc_key->pn, enc_key->pn_len);
+		km->key_param_set.key_type = KEY_TYPE_ID_AES;
+		km->key_param_set.key_params.aes.key_len =
+					  cpu_to_le16(enc_key->key_len);
+		memcpy(km->key_param_set.key_params.aes.key,
+		       enc_key->key_material, enc_key->key_len);
+		len += sizeof(struct mwifiex_aes_param);
+	}
+
+	km->key_param_set.len = cpu_to_le16(len);
+	size = len + sizeof(struct mwifiex_ie_types_header) +
+	       sizeof(km->action) + S_DS_GEN;
+	cmd->size = cpu_to_le16(size);
+
+	return 0;
+}
+
+/* This function prepares command to set/get/reset network key(s).
+ * This function prepares key material command for V2 format.
+ * Preparation includes -
+ *      - Setting command ID, action and proper size
+ *      - Setting WEP keys, WAPI keys or WPA keys along with required
+ *        encryption (TKIP, AES) (as required)
+ *      - Ensuring correct endian-ness
+ */
+static int
+mwifiex_cmd_802_11_key_material_v2(struct mwifiex_private *priv,
+				   struct host_cmd_ds_command *cmd,
+				   u16 cmd_action, u32 cmd_oid,
+				   struct mwifiex_ds_encrypt_key *enc_key)
+{
+	struct mwifiex_adapter *adapter = priv->adapter;
+	u8 *mac = enc_key->mac_addr;
+	u16 key_info, len = KEY_PARAMS_FIXED_LEN;
+	struct host_cmd_ds_802_11_key_material_v2 *km =
+						&cmd->params.key_material_v2;
+
+	cmd->command = cpu_to_le16(HostCmd_CMD_802_11_KEY_MATERIAL);
+	km->action = cpu_to_le16(cmd_action);
+
+	if (cmd_action == HostCmd_ACT_GEN_GET) {
+		dev_dbg(adapter->dev, "%s: Get key\n", __func__);
+		km->key_param_set.key_idx =
+					enc_key->key_index & KEY_INDEX_MASK;
+		km->key_param_set.type = cpu_to_le16(TLV_TYPE_KEY_PARAM_V2);
+		km->key_param_set.len = cpu_to_le16(KEY_PARAMS_FIXED_LEN);
+		memcpy(km->key_param_set.mac_addr, mac, ETH_ALEN);
+
+		if (enc_key->key_index & MWIFIEX_KEY_INDEX_UNICAST)
+			key_info = KEY_UNICAST;
+		else
+			key_info = KEY_MCAST;
+
+		if (enc_key->is_igtk_key)
+			key_info |= KEY_IGTK;
+
+		km->key_param_set.key_info = cpu_to_le16(key_info);
+
+		cmd->size = cpu_to_le16(sizeof(struct mwifiex_ie_types_header) +
+					S_DS_GEN + KEY_PARAMS_FIXED_LEN +
+					sizeof(km->action));
+		return 0;
+	}
+
+	memset(&km->key_param_set, 0,
+	       sizeof(struct mwifiex_ie_type_key_param_set_v2));
+
+	if (enc_key->key_disable) {
+		dev_dbg(adapter->dev, "%s: Remove key\n", __func__);
+		km->action = cpu_to_le16(HostCmd_ACT_GEN_REMOVE);
+		km->key_param_set.type = cpu_to_le16(TLV_TYPE_KEY_PARAM_V2);
+		km->key_param_set.len = cpu_to_le16(KEY_PARAMS_FIXED_LEN);
+		km->key_param_set.key_idx = enc_key->key_index & KEY_INDEX_MASK;
+		key_info = KEY_MCAST | KEY_UNICAST;
+		km->key_param_set.key_info = cpu_to_le16(key_info);
+		memcpy(km->key_param_set.mac_addr, mac, ETH_ALEN);
+		cmd->size = cpu_to_le16(sizeof(struct mwifiex_ie_types_header) +
+					S_DS_GEN + KEY_PARAMS_FIXED_LEN +
+					sizeof(km->action));
+		return 0;
+	}
+
+	km->action = cpu_to_le16(HostCmd_ACT_GEN_SET);
+	km->key_param_set.key_idx = enc_key->key_index & KEY_INDEX_MASK;
+	km->key_param_set.type = cpu_to_le16(TLV_TYPE_KEY_PARAM_V2);
+	key_info = KEY_ENABLED;
+	memcpy(km->key_param_set.mac_addr, mac, ETH_ALEN);
+
+	if (enc_key->key_len <= WLAN_KEY_LEN_WEP104) {
+		dev_dbg(adapter->dev, "%s: Set WEP Key\n", __func__);
+		len += sizeof(struct mwifiex_wep_param);
+		km->key_param_set.len = cpu_to_le16(len);
+		km->key_param_set.key_type = KEY_TYPE_ID_WEP;
+
+		if (GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_UAP) {
+				key_info |= KEY_MCAST | KEY_UNICAST;
+		} else {
+			if (enc_key->is_current_wep_key) {
+				key_info |= KEY_MCAST | KEY_UNICAST;
+				if (km->key_param_set.key_idx ==
+				    (priv->wep_key_curr_index & KEY_INDEX_MASK))
+					key_info |= KEY_DEFAULT;
+			} else {
+				if (mac) {
+					if (is_broadcast_ether_addr(mac))
+						key_info |= KEY_MCAST;
+					else
+						key_info |= KEY_UNICAST |
+							    KEY_DEFAULT;
+				} else {
+					key_info |= KEY_MCAST;
+				}
+			}
+		}
+		km->key_param_set.key_info = cpu_to_le16(key_info);
+
+		km->key_param_set.key_params.wep.key_len =
+						  cpu_to_le16(enc_key->key_len);
+		memcpy(km->key_param_set.key_params.wep.key,
+		       enc_key->key_material, enc_key->key_len);
+
+		cmd->size = cpu_to_le16(sizeof(struct mwifiex_ie_types_header) +
+					len + sizeof(km->action) + S_DS_GEN);
+		return 0;
+	}
+
+	if (is_broadcast_ether_addr(mac))
+		key_info |= KEY_MCAST | KEY_RX_KEY;
+	else
+		key_info |= KEY_UNICAST | KEY_TX_KEY | KEY_RX_KEY;
+
+	if (enc_key->is_wapi_key) {
+		dev_dbg(adapter->dev, "%s: Set WAPI Key\n", __func__);
+		km->key_param_set.key_type = KEY_TYPE_ID_WAPI;
+		memcpy(km->key_param_set.key_params.wapi.pn, enc_key->pn,
+		       PN_LEN);
+		km->key_param_set.key_params.wapi.key_len =
+						cpu_to_le16(enc_key->key_len);
+		memcpy(km->key_param_set.key_params.wapi.key,
+		       enc_key->key_material, enc_key->key_len);
+		if (is_broadcast_ether_addr(mac))
+			priv->sec_info.wapi_key_on = true;
+
+		if (!priv->sec_info.wapi_key_on)
+			key_info |= KEY_DEFAULT;
+		km->key_param_set.key_info = cpu_to_le16(key_info);
+
+		len += sizeof(struct mwifiex_wapi_param);
+		km->key_param_set.len = cpu_to_le16(len);
+		cmd->size = cpu_to_le16(sizeof(struct mwifiex_ie_types_header) +
+					len + sizeof(km->action) + S_DS_GEN);
+		return 0;
+	}
+
+	if (priv->bss_mode == NL80211_IFTYPE_ADHOC) {
+		key_info |= KEY_DEFAULT;
+		/* Enable unicast bit for WPA-NONE/ADHOC_AES */
+		if (!priv->sec_info.wpa2_enabled &&
+		    !is_broadcast_ether_addr(mac))
+			key_info |= KEY_UNICAST;
+	} else {
+		/* Enable default key for WPA/WPA2 */
+		if (!priv->wpa_is_gtk_set)
+			key_info |= KEY_DEFAULT;
+	}
+
+	km->key_param_set.key_info = cpu_to_le16(key_info);
+
+	if (enc_key->key_len == WLAN_KEY_LEN_CCMP)
+		return mwifiex_set_aes_key_v2(priv, cmd, enc_key, km);
+
+	if (enc_key->key_len == WLAN_KEY_LEN_TKIP) {
+		dev_dbg(adapter->dev, "%s: Set TKIP Key\n", __func__);
+		if (enc_key->is_rx_seq_valid)
+			memcpy(km->key_param_set.key_params.tkip.pn,
+			       enc_key->pn, enc_key->pn_len);
+		km->key_param_set.key_type = KEY_TYPE_ID_TKIP;
+		km->key_param_set.key_params.tkip.key_len =
+						cpu_to_le16(enc_key->key_len);
+		memcpy(km->key_param_set.key_params.tkip.key,
+		       enc_key->key_material, enc_key->key_len);
+
+		len += sizeof(struct mwifiex_tkip_param);
+		km->key_param_set.len = cpu_to_le16(len);
+		cmd->size = cpu_to_le16(sizeof(struct mwifiex_ie_types_header) +
+					len + sizeof(km->action) + S_DS_GEN);
+	}
+
+	return 0;
+}
+
 /*
  * This function prepares command to set/get/reset network key(s).
+ * This function prepares key material command for V1 format.
  *
  * Preparation includes -
  *      - Setting command ID, action and proper size
@@ -542,10 +762,10 @@ mwifiex_set_keyparamset_wep(struct mwifiex_private *priv,
  *      - Ensuring correct endian-ness
  */
 static int
-mwifiex_cmd_802_11_key_material(struct mwifiex_private *priv,
-				struct host_cmd_ds_command *cmd,
-				u16 cmd_action, u32 cmd_oid,
-				struct mwifiex_ds_encrypt_key *enc_key)
+mwifiex_cmd_802_11_key_material_v1(struct mwifiex_private *priv,
+				   struct host_cmd_ds_command *cmd,
+				   u16 cmd_action, u32 cmd_oid,
+				   struct mwifiex_ds_encrypt_key *enc_key)
 {
 	struct host_cmd_ds_802_11_key_material *key_material =
 		&cmd->params.key_material;
@@ -724,6 +944,24 @@ mwifiex_cmd_802_11_key_material(struct mwifiex_private *priv,
 	return ret;
 }
 
+/* Wrapper function for setting network key depending upon FW KEY API version */
+static int
+mwifiex_cmd_802_11_key_material(struct mwifiex_private *priv,
+				struct host_cmd_ds_command *cmd,
+				u16 cmd_action, u32 cmd_oid,
+				struct mwifiex_ds_encrypt_key *enc_key)
+{
+	if (priv->adapter->fw_key_api_major_ver == FW_KEY_API_VER_MAJOR_V2)
+		return mwifiex_cmd_802_11_key_material_v2(priv, cmd,
+							  cmd_action, cmd_oid,
+							  enc_key);
+
+	else
+		return mwifiex_cmd_802_11_key_material_v1(priv, cmd,
+							  cmd_action, cmd_oid,
+							  enc_key);
+}
+
 /*
  * This function prepares command to set/get 11d domain information.
  *
diff --git a/drivers/net/wireless/mwifiex/sta_cmdresp.c b/drivers/net/wireless/mwifiex/sta_cmdresp.c
index 48abab6bfce9..1c5e18804074 100644
--- a/drivers/net/wireless/mwifiex/sta_cmdresp.c
+++ b/drivers/net/wireless/mwifiex/sta_cmdresp.c
@@ -562,13 +562,13 @@ static int mwifiex_ret_802_11_ad_hoc_stop(struct mwifiex_private *priv,
 }
 
 /*
- * This function handles the command response of set/get key material.
+ * This function handles the command response of set/get v1 key material.
  *
  * Handling includes updating the driver parameters to reflect the
  * changes.
  */
-static int mwifiex_ret_802_11_key_material(struct mwifiex_private *priv,
-					   struct host_cmd_ds_command *resp)
+static int mwifiex_ret_802_11_key_material_v1(struct mwifiex_private *priv,
+					      struct host_cmd_ds_command *resp)
 {
 	struct host_cmd_ds_802_11_key_material *key =
 						&resp->params.key_material;
@@ -590,6 +590,51 @@ static int mwifiex_ret_802_11_key_material(struct mwifiex_private *priv,
 	return 0;
 }
 
+/*
+ * This function handles the command response of set/get v2 key material.
+ *
+ * Handling includes updating the driver parameters to reflect the
+ * changes.
+ */
+static int mwifiex_ret_802_11_key_material_v2(struct mwifiex_private *priv,
+					      struct host_cmd_ds_command *resp)
+{
+	struct host_cmd_ds_802_11_key_material_v2 *key_v2;
+	__le16 len;
+
+	key_v2 = &resp->params.key_material_v2;
+	if (le16_to_cpu(key_v2->action) == HostCmd_ACT_GEN_SET) {
+		if ((le16_to_cpu(key_v2->key_param_set.key_info) & KEY_MCAST)) {
+			dev_dbg(priv->adapter->dev, "info: key: GTK is set\n");
+			priv->wpa_is_gtk_set = true;
+			priv->scan_block = false;
+		}
+	}
+
+	if (key_v2->key_param_set.key_type != KEY_TYPE_ID_AES)
+		return 0;
+
+	memset(priv->aes_key_v2.key_param_set.key_params.aes.key, 0,
+	       WLAN_KEY_LEN_CCMP);
+	priv->aes_key_v2.key_param_set.key_params.aes.key_len =
+				key_v2->key_param_set.key_params.aes.key_len;
+	len = priv->aes_key_v2.key_param_set.key_params.aes.key_len;
+	memcpy(priv->aes_key_v2.key_param_set.key_params.aes.key,
+	       key_v2->key_param_set.key_params.aes.key, le16_to_cpu(len));
+
+	return 0;
+}
+
+/* Wrapper function for processing response of key material command */
+static int mwifiex_ret_802_11_key_material(struct mwifiex_private *priv,
+					   struct host_cmd_ds_command *resp)
+{
+	if (priv->adapter->fw_key_api_major_ver == FW_KEY_API_VER_MAJOR_V2)
+		return mwifiex_ret_802_11_key_material_v2(priv, resp);
+	else
+		return mwifiex_ret_802_11_key_material_v1(priv, resp);
+}
+
 /*
  * This function handles the command response of get 11d domain information.
  */
diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c
index c3d3ea55d605..b393d55b3aa0 100644
--- a/drivers/net/wireless/mwifiex/sta_ioctl.c
+++ b/drivers/net/wireless/mwifiex/sta_ioctl.c
@@ -865,6 +865,7 @@ static int mwifiex_sec_ioctl_set_wapi_key(struct mwifiex_private *priv,
 static int mwifiex_sec_ioctl_set_wep_key(struct mwifiex_private *priv,
 			      struct mwifiex_ds_encrypt_key *encrypt_key)
 {
+	struct mwifiex_adapter *adapter = priv->adapter;
 	int ret;
 	struct mwifiex_wep_key *wep_key;
 	int index;
@@ -879,10 +880,17 @@ static int mwifiex_sec_ioctl_set_wep_key(struct mwifiex_private *priv,
 		/* Copy the required key as the current key */
 		wep_key = &priv->wep_key[index];
 		if (!wep_key->key_length) {
-			dev_err(priv->adapter->dev,
+			dev_err(adapter->dev,
 				"key not set, so cannot enable it\n");
 			return -1;
 		}
+
+		if (adapter->fw_key_api_major_ver == FW_KEY_API_VER_MAJOR_V2) {
+			memcpy(encrypt_key->key_material,
+			       wep_key->key_material, wep_key->key_length);
+			encrypt_key->key_len = wep_key->key_length;
+		}
+
 		priv->wep_key_curr_index = (u16) index;
 		priv->sec_info.wep_enabled = 1;
 	} else {
@@ -897,13 +905,25 @@ static int mwifiex_sec_ioctl_set_wep_key(struct mwifiex_private *priv,
 		priv->sec_info.wep_enabled = 1;
 	}
 	if (wep_key->key_length) {
+		void *enc_key;
+
+		if (encrypt_key->key_disable)
+			memset(&priv->wep_key[index], 0,
+			       sizeof(struct mwifiex_wep_key));
+
+		if (adapter->fw_key_api_major_ver == FW_KEY_API_VER_MAJOR_V2)
+			enc_key = encrypt_key;
+		else
+			enc_key = NULL;
+
 		/* Send request to firmware */
 		ret = mwifiex_send_cmd_async(priv,
 					     HostCmd_CMD_802_11_KEY_MATERIAL,
-					     HostCmd_ACT_GEN_SET, 0, NULL);
+					     HostCmd_ACT_GEN_SET, 0, enc_key);
 		if (ret)
 			return ret;
 	}
+
 	if (priv->sec_info.wep_enabled)
 		priv->curr_pkt_filter |= HostCmd_ACT_MAC_WEP_ENABLE;
 	else
@@ -1044,19 +1064,27 @@ int mwifiex_set_encode(struct mwifiex_private *priv, struct key_params *kp,
 
 	memset(&encrypt_key, 0, sizeof(struct mwifiex_ds_encrypt_key));
 	encrypt_key.key_len = key_len;
+	encrypt_key.key_index = key_index;
 
 	if (kp && kp->cipher == WLAN_CIPHER_SUITE_AES_CMAC)
 		encrypt_key.is_igtk_key = true;
 
 	if (!disable) {
-		encrypt_key.key_index = key_index;
 		if (key_len)
 			memcpy(encrypt_key.key_material, key, key_len);
+		else
+			encrypt_key.is_current_wep_key = true;
+
 		if (mac_addr)
 			memcpy(encrypt_key.mac_addr, mac_addr, ETH_ALEN);
-		if (kp && kp->seq && kp->seq_len)
+		if (kp && kp->seq && kp->seq_len) {
 			memcpy(encrypt_key.pn, kp->seq, kp->seq_len);
+			encrypt_key.pn_len = kp->seq_len;
+			encrypt_key.is_rx_seq_valid = true;
+		}
 	} else {
+		if (GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_UAP)
+			return 0;
 		encrypt_key.key_disable = true;
 		if (mac_addr)
 			memcpy(encrypt_key.mac_addr, mac_addr, ETH_ALEN);
-- 
cgit v1.2.2


From f9fd7ec786e41a3730916bbc1bc1d9d347f07ec5 Mon Sep 17 00:00:00 2001
From: Laurence Evans <levans@solarflare.com>
Date: Wed, 12 Feb 2014 18:58:24 +0000
Subject: sfc: Removed adhoc scheme to rate limit PTP event queue overflow
 message

Use conventional net_ratelimit() instead.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/sfc/ptp.c | 22 ++--------------------
 1 file changed, 2 insertions(+), 20 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/sfc/ptp.c b/drivers/net/ethernet/sfc/ptp.c
index eb75fbd11a01..52be63dc68cf 100644
--- a/drivers/net/ethernet/sfc/ptp.c
+++ b/drivers/net/ethernet/sfc/ptp.c
@@ -223,7 +223,6 @@ struct efx_ptp_timeset {
  * @evt_list: List of MC receive events awaiting packets
  * @evt_free_list: List of free events
  * @evt_lock: Lock for manipulating evt_list and evt_free_list
- * @evt_overflow: Boolean indicating that event list has overflowed
  * @rx_evts: Instantiated events (on evt_list and evt_free_list)
  * @workwq: Work queue for processing pending PTP operations
  * @work: Work task
@@ -275,7 +274,6 @@ struct efx_ptp_data {
 	struct list_head evt_list;
 	struct list_head evt_free_list;
 	spinlock_t evt_lock;
-	bool evt_overflow;
 	struct efx_ptp_event_rx rx_evts[MAX_RECEIVE_EVENTS];
 	struct workqueue_struct *workwq;
 	struct work_struct work;
@@ -941,11 +939,6 @@ static void efx_ptp_drop_time_expired_events(struct efx_nic *efx)
 			}
 		}
 	}
-	/* If the event overflow flag is set and the event list is now empty
-	 * clear the flag to re-enable the overflow warning message.
-	 */
-	if (ptp->evt_overflow && list_empty(&ptp->evt_list))
-		ptp->evt_overflow = false;
 	spin_unlock_bh(&ptp->evt_lock);
 }
 
@@ -989,11 +982,6 @@ static enum ptp_packet_state efx_ptp_match_rx(struct efx_nic *efx,
 			break;
 		}
 	}
-	/* If the event overflow flag is set and the event list is now empty
-	 * clear the flag to re-enable the overflow warning message.
-	 */
-	if (ptp->evt_overflow && list_empty(&ptp->evt_list))
-		ptp->evt_overflow = false;
 	spin_unlock_bh(&ptp->evt_lock);
 
 	return rc;
@@ -1147,7 +1135,6 @@ static int efx_ptp_stop(struct efx_nic *efx)
 	list_for_each_safe(cursor, next, &efx->ptp_data->evt_list) {
 		list_move(cursor, &efx->ptp_data->evt_free_list);
 	}
-	ptp->evt_overflow = false;
 	spin_unlock_bh(&efx->ptp_data->evt_lock);
 
 	return rc;
@@ -1253,7 +1240,6 @@ int efx_ptp_probe(struct efx_nic *efx, struct efx_channel *channel)
 	spin_lock_init(&ptp->evt_lock);
 	for (pos = 0; pos < MAX_RECEIVE_EVENTS; pos++)
 		list_add(&ptp->rx_evts[pos].link, &ptp->evt_free_list);
-	ptp->evt_overflow = false;
 
 	/* Get the NIC PTP attributes and set up time conversions */
 	rc = efx_ptp_get_attributes(efx);
@@ -1635,13 +1621,9 @@ static void ptp_event_rx(struct efx_nic *efx, struct efx_ptp_data *ptp)
 		list_add_tail(&evt->link, &ptp->evt_list);
 
 		queue_work(ptp->workwq, &ptp->work);
-	} else if (!ptp->evt_overflow) {
-		/* Log a warning message and set the event overflow flag.
-		 * The message won't be logged again until the event queue
-		 * becomes empty.
-		 */
+	} else if (net_ratelimit()) {
+		/* Log a rate-limited warning message. */
 		netif_err(efx, rx_err, efx->net_dev, "PTP event queue overflow\n");
-		ptp->evt_overflow = true;
 	}
 	spin_unlock_bh(&ptp->evt_lock);
 }
-- 
cgit v1.2.2


From ce320f44d677549a29ae8d6ae79e66d1c997f87a Mon Sep 17 00:00:00 2001
From: Ben Hutchings <bhutchings@solarflare.com>
Date: Wed, 12 Feb 2014 18:58:34 +0000
Subject: sfc: Cache skb->data in local variable in efx_ptp_rx()

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/sfc/ptp.c | 23 +++++++++++++----------
 1 file changed, 13 insertions(+), 10 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/sfc/ptp.c b/drivers/net/ethernet/sfc/ptp.c
index 52be63dc68cf..7d0de5002f41 100644
--- a/drivers/net/ethernet/sfc/ptp.c
+++ b/drivers/net/ethernet/sfc/ptp.c
@@ -1366,6 +1366,7 @@ static bool efx_ptp_rx(struct efx_channel *channel, struct sk_buff *skb)
 	struct efx_ptp_match *match = (struct efx_ptp_match *)skb->cb;
 	u8 *match_data_012, *match_data_345;
 	unsigned int version;
+	u8 *data;
 
 	match->expiry = jiffies + msecs_to_jiffies(PKT_EVENT_LIFETIME_MS);
 
@@ -1374,7 +1375,8 @@ static bool efx_ptp_rx(struct efx_channel *channel, struct sk_buff *skb)
 		if (!pskb_may_pull(skb, PTP_V1_MIN_LENGTH)) {
 			return false;
 		}
-		version = ntohs(*(__be16 *)&skb->data[PTP_V1_VERSION_OFFSET]);
+		data = skb->data;
+		version = ntohs(*(__be16 *)&data[PTP_V1_VERSION_OFFSET]);
 		if (version != PTP_VERSION_V1) {
 			return false;
 		}
@@ -1382,13 +1384,14 @@ static bool efx_ptp_rx(struct efx_channel *channel, struct sk_buff *skb)
 		/* PTP V1 uses all six bytes of the UUID to match the packet
 		 * to the timestamp
 		 */
-		match_data_012 = skb->data + PTP_V1_UUID_OFFSET;
-		match_data_345 = skb->data + PTP_V1_UUID_OFFSET + 3;
+		match_data_012 = data + PTP_V1_UUID_OFFSET;
+		match_data_345 = data + PTP_V1_UUID_OFFSET + 3;
 	} else {
 		if (!pskb_may_pull(skb, PTP_V2_MIN_LENGTH)) {
 			return false;
 		}
-		version = skb->data[PTP_V2_VERSION_OFFSET];
+		data = skb->data;
+		version = data[PTP_V2_VERSION_OFFSET];
 		if ((version & PTP_VERSION_V2_MASK) != PTP_VERSION_V2) {
 			return false;
 		}
@@ -1400,17 +1403,17 @@ static bool efx_ptp_rx(struct efx_channel *channel, struct sk_buff *skb)
 		 * enhanced mode fixes this issue and uses bytes 0-2
 		 * and byte 5-7 of the UUID.
 		 */
-		match_data_345 = skb->data + PTP_V2_UUID_OFFSET + 5;
+		match_data_345 = data + PTP_V2_UUID_OFFSET + 5;
 		if (ptp->mode == MC_CMD_PTP_MODE_V2) {
-			match_data_012 = skb->data + PTP_V2_UUID_OFFSET + 2;
+			match_data_012 = data + PTP_V2_UUID_OFFSET + 2;
 		} else {
-			match_data_012 = skb->data + PTP_V2_UUID_OFFSET + 0;
+			match_data_012 = data + PTP_V2_UUID_OFFSET + 0;
 			BUG_ON(ptp->mode != MC_CMD_PTP_MODE_V2_ENHANCED);
 		}
 	}
 
 	/* Does this packet require timestamping? */
-	if (ntohs(*(__be16 *)&skb->data[PTP_DPORT_OFFSET]) == PTP_EVENT_PORT) {
+	if (ntohs(*(__be16 *)&data[PTP_DPORT_OFFSET]) == PTP_EVENT_PORT) {
 		match->state = PTP_PACKET_STATE_UNMATCHED;
 
 		/* We expect the sequence number to be in the same position in
@@ -1426,8 +1429,8 @@ static bool efx_ptp_rx(struct efx_channel *channel, struct sk_buff *skb)
 				   (match_data_345[0] << 24));
 		match->words[1] = (match_data_345[1]         |
 				   (match_data_345[2] << 8)  |
-				   (skb->data[PTP_V1_SEQUENCE_OFFSET +
-					      PTP_V1_SEQUENCE_LENGTH - 1] <<
+				   (data[PTP_V1_SEQUENCE_OFFSET +
+					 PTP_V1_SEQUENCE_LENGTH - 1] <<
 				    16));
 	} else {
 		match->state = PTP_PACKET_STATE_MATCH_UNWANTED;
-- 
cgit v1.2.2


From 92d8f766ecce190dc2aa5d1aa9a5f5381e831641 Mon Sep 17 00:00:00 2001
From: Ben Hutchings <bhutchings@solarflare.com>
Date: Wed, 12 Feb 2014 18:58:46 +0000
Subject: sfc: Rewrite adjustment of PPS event in a clearer way

There is substantial latency in generation and handling of PPS events
from the NIC, which we have to correct for before passing a host
timestamp to the PPS subsystem.  We compare clocks with the MC,
giving us two offsets to subtract from the timestamp generated by
pps_get_ts():

(a) Time from the last good sync (where we got host and NIC timestamps
    for nearly the same instant) to the time we called pps_get_ts()
(b) Time from NIC top of second to the last good sync

We currently calculate (a) + (b) in a quite confusing way.
Instead, calculate (a) completely, then add (b) to it.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/sfc/ptp.c | 47 +++++++++++++++++++++---------------------
 1 file changed, 23 insertions(+), 24 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/sfc/ptp.c b/drivers/net/ethernet/sfc/ptp.c
index 7d0de5002f41..28275e395cb8 100644
--- a/drivers/net/ethernet/sfc/ptp.c
+++ b/drivers/net/ethernet/sfc/ptp.c
@@ -766,37 +766,36 @@ efx_ptp_process_times(struct efx_nic *efx, MCDI_DECLARE_STRUCT_PTR(synch_buf),
 		return -EAGAIN;
 	}
 
-	/* Convert the NIC time into kernel time. No correction is required-
-	 * this time is the output of a firmware process.
-	 */
-	mc_time = ptp->nic_to_kernel_time(ptp->timeset[last_good].major,
-					  ptp->timeset[last_good].minor, 0);
-
-	/* Calculate delay from actual PPS to last_time */
-	delta = ktime_to_timespec(mc_time);
-	delta.tv_nsec +=
-		last_time->ts_real.tv_nsec -
-		(ptp->timeset[last_good].host_start & MC_NANOSECOND_MASK);
-
-	/* It is possible that the seconds rolled over between taking
+	/* Calculate delay from last good sync (host time) to last_time.
+	 * It is possible that the seconds rolled over between taking
 	 * the start reading and the last value written by the host.  The
 	 * timescales are such that a gap of more than one second is never
-	 * expected.
+	 * expected.  delta is *not* normalised.
 	 */
 	start_sec = ptp->timeset[last_good].host_start >> MC_NANOSECOND_BITS;
 	last_sec = last_time->ts_real.tv_sec & MC_SECOND_MASK;
-	if (start_sec != last_sec) {
-		if (((start_sec + 1) & MC_SECOND_MASK) != last_sec) {
-			netif_warn(efx, hw, efx->net_dev,
-				   "PTP bad synchronisation seconds\n");
-			return -EAGAIN;
-		} else {
-			delta.tv_sec = 1;
-		}
-	} else {
-		delta.tv_sec = 0;
+	if (start_sec != last_sec &&
+	    ((start_sec + 1) & MC_SECOND_MASK) != last_sec) {
+		netif_warn(efx, hw, efx->net_dev,
+			   "PTP bad synchronisation seconds\n");
+		return -EAGAIN;
 	}
+	delta.tv_sec = (last_sec - start_sec) & 1;
+	delta.tv_nsec =
+		last_time->ts_real.tv_nsec -
+		(ptp->timeset[last_good].host_start & MC_NANOSECOND_MASK);
+
+	/* Convert the NIC time at last good sync into kernel time.
+	 * No correction is required - this time is the output of a
+	 * firmware process.
+	 */
+	mc_time = ptp->nic_to_kernel_time(ptp->timeset[last_good].major,
+					  ptp->timeset[last_good].minor, 0);
+
+	/* Calculate delay from NIC top of second to last_time */
+	delta.tv_nsec += ktime_to_timespec(mc_time).tv_nsec;
 
+	/* Set PPS timestamp to match NIC top of second */
 	ptp->host_time_pps = *last_time;
 	pps_sub_ts(&ptp->host_time_pps, delta);
 
-- 
cgit v1.2.2


From 0bdadad16608a69defe0b64745a0a6a2edc8e012 Mon Sep 17 00:00:00 2001
From: Ben Hutchings <bhutchings@solarflare.com>
Date: Wed, 12 Feb 2014 18:58:57 +0000
Subject: sfc: Replace TSOH_OFFSET with the equivalent NET_IP_ALIGN

If CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is defined then NET_IP_ALIGN
will be defined as 0, so this macro is redundant.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/sfc/tx.c | 17 ++++-------------
 1 file changed, 4 insertions(+), 13 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/sfc/tx.c b/drivers/net/ethernet/sfc/tx.c
index 75d11fa4eb0a..3aa22cdef380 100644
--- a/drivers/net/ethernet/sfc/tx.c
+++ b/drivers/net/ethernet/sfc/tx.c
@@ -787,15 +787,6 @@ void efx_remove_tx_queue(struct efx_tx_queue *tx_queue)
  * Requires TX checksum offload support.
  */
 
-/* Number of bytes inserted at the start of a TSO header buffer,
- * similar to NET_IP_ALIGN.
- */
-#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
-#define TSOH_OFFSET	0
-#else
-#define TSOH_OFFSET	NET_IP_ALIGN
-#endif
-
 #define PTR_DIFF(p1, p2)  ((u8 *)(p1) - (u8 *)(p2))
 
 /**
@@ -882,13 +873,13 @@ static u8 *efx_tsoh_get_buffer(struct efx_tx_queue *tx_queue,
 	EFX_BUG_ON_PARANOID(buffer->flags);
 	EFX_BUG_ON_PARANOID(buffer->unmap_len);
 
-	if (likely(len <= TSOH_STD_SIZE - TSOH_OFFSET)) {
+	if (likely(len <= TSOH_STD_SIZE - NET_IP_ALIGN)) {
 		unsigned index =
 			(tx_queue->insert_count & tx_queue->ptr_mask) / 2;
 		struct efx_buffer *page_buf =
 			&tx_queue->tsoh_page[index / TSOH_PER_PAGE];
 		unsigned offset =
-			TSOH_STD_SIZE * (index % TSOH_PER_PAGE) + TSOH_OFFSET;
+			TSOH_STD_SIZE * (index % TSOH_PER_PAGE) + NET_IP_ALIGN;
 
 		if (unlikely(!page_buf->addr) &&
 		    efx_nic_alloc_buffer(tx_queue->efx, page_buf, PAGE_SIZE,
@@ -901,10 +892,10 @@ static u8 *efx_tsoh_get_buffer(struct efx_tx_queue *tx_queue,
 	} else {
 		tx_queue->tso_long_headers++;
 
-		buffer->heap_buf = kmalloc(TSOH_OFFSET + len, GFP_ATOMIC);
+		buffer->heap_buf = kmalloc(NET_IP_ALIGN + len, GFP_ATOMIC);
 		if (unlikely(!buffer->heap_buf))
 			return NULL;
-		result = (u8 *)buffer->heap_buf + TSOH_OFFSET;
+		result = (u8 *)buffer->heap_buf + NET_IP_ALIGN;
 		buffer->flags = EFX_TX_BUF_CONT | EFX_TX_BUF_HEAP;
 	}
 
-- 
cgit v1.2.2


From 86fc187fcc3e7155494a5c2ce823047a00279834 Mon Sep 17 00:00:00 2001
From: Ben Hutchings <bhutchings@solarflare.com>
Date: Wed, 12 Feb 2014 18:59:07 +0000
Subject: sfc: Remove unused definitions of EF10 user-mode DMA descriptors

These DMA descriptor types will only be used by the userland
networking stack.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/sfc/ef10_regs.h | 61 ------------------------------------
 1 file changed, 61 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/sfc/ef10_regs.h b/drivers/net/ethernet/sfc/ef10_regs.h
index 207ac9a1e3de..62a55dde61d5 100644
--- a/drivers/net/ethernet/sfc/ef10_regs.h
+++ b/drivers/net/ethernet/sfc/ef10_regs.h
@@ -227,36 +227,6 @@
 #define	ESF_DZ_RX_KER_BUF_ADDR_LBN 0
 #define	ESF_DZ_RX_KER_BUF_ADDR_WIDTH 48
 
-/* RX_USER_DESC */
-#define	ESF_DZ_RX_USR_RESERVED_LBN 62
-#define	ESF_DZ_RX_USR_RESERVED_WIDTH 2
-#define	ESF_DZ_RX_USR_BYTE_CNT_LBN 48
-#define	ESF_DZ_RX_USR_BYTE_CNT_WIDTH 14
-#define	ESF_DZ_RX_USR_BUF_PAGE_SIZE_LBN 44
-#define	ESF_DZ_RX_USR_BUF_PAGE_SIZE_WIDTH 4
-#define	ESE_DZ_USR_BUF_PAGE_SZ_4MB 10
-#define	ESE_DZ_USR_BUF_PAGE_SZ_1MB 8
-#define	ESE_DZ_USR_BUF_PAGE_SZ_64KB 4
-#define	ESE_DZ_USR_BUF_PAGE_SZ_4KB 0
-#define	ESF_DZ_RX_USR_BUF_ID_OFFSET_LBN 0
-#define	ESF_DZ_RX_USR_BUF_ID_OFFSET_WIDTH 44
-#define	ESF_DZ_RX_USR_4KBPS_BUF_ID_LBN 12
-#define	ESF_DZ_RX_USR_4KBPS_BUF_ID_WIDTH 32
-#define	ESF_DZ_RX_USR_64KBPS_BUF_ID_LBN 16
-#define	ESF_DZ_RX_USR_64KBPS_BUF_ID_WIDTH 28
-#define	ESF_DZ_RX_USR_1MBPS_BUF_ID_LBN 20
-#define	ESF_DZ_RX_USR_1MBPS_BUF_ID_WIDTH 24
-#define	ESF_DZ_RX_USR_4MBPS_BUF_ID_LBN 22
-#define	ESF_DZ_RX_USR_4MBPS_BUF_ID_WIDTH 22
-#define	ESF_DZ_RX_USR_4MBPS_BYTE_OFFSET_LBN 0
-#define	ESF_DZ_RX_USR_4MBPS_BYTE_OFFSET_WIDTH 22
-#define	ESF_DZ_RX_USR_1MBPS_BYTE_OFFSET_LBN 0
-#define	ESF_DZ_RX_USR_1MBPS_BYTE_OFFSET_WIDTH 20
-#define	ESF_DZ_RX_USR_64KBPS_BYTE_OFFSET_LBN 0
-#define	ESF_DZ_RX_USR_64KBPS_BYTE_OFFSET_WIDTH 16
-#define	ESF_DZ_RX_USR_4KBPS_BYTE_OFFSET_LBN 0
-#define	ESF_DZ_RX_USR_4KBPS_BYTE_OFFSET_WIDTH 12
-
 /* TX_CSUM_TSTAMP_DESC */
 #define	ESF_DZ_TX_DESC_IS_OPT_LBN 63
 #define	ESF_DZ_TX_DESC_IS_OPT_WIDTH 1
@@ -338,37 +308,6 @@
 #define	ESF_DZ_TX_TSO_TCP_SEQNO_LBN 0
 #define	ESF_DZ_TX_TSO_TCP_SEQNO_WIDTH 32
 
-/* TX_USER_DESC */
-#define	ESF_DZ_TX_USR_TYPE_LBN 63
-#define	ESF_DZ_TX_USR_TYPE_WIDTH 1
-#define	ESF_DZ_TX_USR_CONT_LBN 62
-#define	ESF_DZ_TX_USR_CONT_WIDTH 1
-#define	ESF_DZ_TX_USR_BYTE_CNT_LBN 48
-#define	ESF_DZ_TX_USR_BYTE_CNT_WIDTH 14
-#define	ESF_DZ_TX_USR_BUF_PAGE_SIZE_LBN 44
-#define	ESF_DZ_TX_USR_BUF_PAGE_SIZE_WIDTH 4
-#define	ESE_DZ_USR_BUF_PAGE_SZ_4MB 10
-#define	ESE_DZ_USR_BUF_PAGE_SZ_1MB 8
-#define	ESE_DZ_USR_BUF_PAGE_SZ_64KB 4
-#define	ESE_DZ_USR_BUF_PAGE_SZ_4KB 0
-#define	ESF_DZ_TX_USR_BUF_ID_OFFSET_LBN 0
-#define	ESF_DZ_TX_USR_BUF_ID_OFFSET_WIDTH 44
-#define	ESF_DZ_TX_USR_4KBPS_BUF_ID_LBN 12
-#define	ESF_DZ_TX_USR_4KBPS_BUF_ID_WIDTH 32
-#define	ESF_DZ_TX_USR_64KBPS_BUF_ID_LBN 16
-#define	ESF_DZ_TX_USR_64KBPS_BUF_ID_WIDTH 28
-#define	ESF_DZ_TX_USR_1MBPS_BUF_ID_LBN 20
-#define	ESF_DZ_TX_USR_1MBPS_BUF_ID_WIDTH 24
-#define	ESF_DZ_TX_USR_4MBPS_BUF_ID_LBN 22
-#define	ESF_DZ_TX_USR_4MBPS_BUF_ID_WIDTH 22
-#define	ESF_DZ_TX_USR_4MBPS_BYTE_OFFSET_LBN 0
-#define	ESF_DZ_TX_USR_4MBPS_BYTE_OFFSET_WIDTH 22
-#define	ESF_DZ_TX_USR_1MBPS_BYTE_OFFSET_LBN 0
-#define	ESF_DZ_TX_USR_1MBPS_BYTE_OFFSET_WIDTH 20
-#define	ESF_DZ_TX_USR_64KBPS_BYTE_OFFSET_LBN 0
-#define	ESF_DZ_TX_USR_64KBPS_BYTE_OFFSET_WIDTH 16
-#define	ESF_DZ_TX_USR_4KBPS_BYTE_OFFSET_LBN 0
-#define	ESF_DZ_TX_USR_4KBPS_BYTE_OFFSET_WIDTH 12
 /*************************************************************************/
 
 /* TX_DESC_UPD_REG: Transmit descriptor update register.
-- 
cgit v1.2.2


From aa3930ee8cc7ab56f8a62d4e80e178ab520dca87 Mon Sep 17 00:00:00 2001
From: Ben Hutchings <bhutchings@solarflare.com>
Date: Wed, 12 Feb 2014 18:59:19 +0000
Subject: sfc: Correct comment about number of TX queues used on EF10

EF10 implements option descriptors to switch TX checksum offload
on and off between packets.  We could therefore use a single
hardware TX queue per kernel TX queue, although we don't yet.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/sfc/ef10.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/sfc/ef10.c b/drivers/net/ethernet/sfc/ef10.c
index 174a92f5fe51..3b397987119d 100644
--- a/drivers/net/ethernet/sfc/ef10.c
+++ b/drivers/net/ethernet/sfc/ef10.c
@@ -172,8 +172,8 @@ static int efx_ef10_probe(struct efx_nic *efx)
 	struct efx_ef10_nic_data *nic_data;
 	int i, rc;
 
-	/* We can have one VI for each 8K region.  However we need
-	 * multiple TX queues per channel.
+	/* We can have one VI for each 8K region.  However, until we
+	 * use TX option descriptors we need two TX queues per channel.
 	 */
 	efx->max_channels =
 		min_t(unsigned int,
-- 
cgit v1.2.2


From 2fa25cf1e1cad74df4b465710e55a62386743614 Mon Sep 17 00:00:00 2001
From: Ben Hutchings <bhutchings@solarflare.com>
Date: Wed, 12 Feb 2014 18:59:28 +0000
Subject: sfc: Preserve rx_frm_trunc counters when resizing DMA rings

We allocate efx_channel structures with kzalloc() so we don't need to
zero-initialise individual fields in efx_probe_channel().  Further,
this function will be called again during DMA ring resizing and we
should not reset any statistics then.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/sfc/efx.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/sfc/efx.c b/drivers/net/ethernet/sfc/efx.c
index 83d464347021..84a1e11ddd79 100644
--- a/drivers/net/ethernet/sfc/efx.c
+++ b/drivers/net/ethernet/sfc/efx.c
@@ -503,8 +503,6 @@ static int efx_probe_channel(struct efx_channel *channel)
 			goto fail;
 	}
 
-	channel->n_rx_frm_trunc = 0;
-
 	return 0;
 
 fail:
-- 
cgit v1.2.2


From 93413f5058aa129bd6134b3176633a5ce198567b Mon Sep 17 00:00:00 2001
From: Ben Hutchings <bhutchings@solarflare.com>
Date: Wed, 12 Feb 2014 18:59:41 +0000
Subject: sfc: Rename 'use_options' variable in tso_start() to clearer
 'use_opt_desc'

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/sfc/tx.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/sfc/tx.c b/drivers/net/ethernet/sfc/tx.c
index 3aa22cdef380..fa9475300411 100644
--- a/drivers/net/ethernet/sfc/tx.c
+++ b/drivers/net/ethernet/sfc/tx.c
@@ -1002,7 +1002,7 @@ static void efx_enqueue_unwind(struct efx_tx_queue *tx_queue)
 static int tso_start(struct tso_state *st, struct efx_nic *efx,
 		     const struct sk_buff *skb)
 {
-	bool use_options = efx_nic_rev(efx) >= EFX_REV_HUNT_A0;
+	bool use_opt_desc = efx_nic_rev(efx) >= EFX_REV_HUNT_A0;
 	struct device *dma_dev = &efx->pci_dev->dev;
 	unsigned int header_len, in_len;
 	dma_addr_t dma_addr;
@@ -1028,7 +1028,7 @@ static int tso_start(struct tso_state *st, struct efx_nic *efx,
 
 	st->out_len = skb->len - header_len;
 
-	if (!use_options) {
+	if (!use_opt_desc) {
 		st->header_unmap_len = 0;
 
 		if (likely(in_len == 0)) {
-- 
cgit v1.2.2


From e0b3ae30a2a4d4303ea394e4c2edd8f215dbb13b Mon Sep 17 00:00:00 2001
From: Ben Hutchings <bhutchings@solarflare.com>
Date: Wed, 12 Feb 2014 18:59:54 +0000
Subject: sfc: Use canonical pointer type for MAC address in
 efx_set_mac_address()

Functions such as is_valid_ether_addr() expect u8 *, so use that
instead of char *.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/sfc/efx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/sfc/efx.c b/drivers/net/ethernet/sfc/efx.c
index 84a1e11ddd79..91acdc28b247 100644
--- a/drivers/net/ethernet/sfc/efx.c
+++ b/drivers/net/ethernet/sfc/efx.c
@@ -2113,7 +2113,7 @@ static int efx_set_mac_address(struct net_device *net_dev, void *data)
 {
 	struct efx_nic *efx = netdev_priv(net_dev);
 	struct sockaddr *addr = data;
-	char *new_addr = addr->sa_data;
+	u8 *new_addr = addr->sa_data;
 
 	if (!is_valid_ether_addr(new_addr)) {
 		netif_err(efx, drv, efx->net_dev,
-- 
cgit v1.2.2


From 6a350fdb609a9d8959d96858e8f9a25e3f5c017a Mon Sep 17 00:00:00 2001
From: Ben Hutchings <bhutchings@solarflare.com>
Date: Wed, 12 Feb 2014 19:00:07 +0000
Subject: sfc: Update product naming

We don't use 'Solarstorm' or 'Solarflare Communications' in full
any more.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/sfc/efx.c | 2 +-
 drivers/net/ethernet/sfc/efx.h | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/sfc/efx.c b/drivers/net/ethernet/sfc/efx.c
index 91acdc28b247..62d1a78984c1 100644
--- a/drivers/net/ethernet/sfc/efx.c
+++ b/drivers/net/ethernet/sfc/efx.c
@@ -3271,6 +3271,6 @@ module_exit(efx_exit_module);
 
 MODULE_AUTHOR("Solarflare Communications and "
 	      "Michael Brown <mbrown@fensystems.co.uk>");
-MODULE_DESCRIPTION("Solarflare Communications network driver");
+MODULE_DESCRIPTION("Solarflare network driver");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, efx_pci_table);
diff --git a/drivers/net/ethernet/sfc/efx.h b/drivers/net/ethernet/sfc/efx.h
index dbd7b78fe01c..99032581336f 100644
--- a/drivers/net/ethernet/sfc/efx.h
+++ b/drivers/net/ethernet/sfc/efx.h
@@ -14,7 +14,7 @@
 #include "net_driver.h"
 #include "filter.h"
 
-/* Solarstorm controllers use BAR 0 for I/O space and BAR 2(&3) for memory */
+/* All controllers use BAR 0 for I/O space and BAR 2(&3) for memory */
 #define EFX_MEM_BAR 2
 
 /* TX */
-- 
cgit v1.2.2


From 17e678d12bef11885af38f23a6753a35ce288177 Mon Sep 17 00:00:00 2001
From: Ben Hutchings <bhutchings@solarflare.com>
Date: Wed, 12 Feb 2014 19:00:16 +0000
Subject: sfc: Cosmetic changes to self-test from the out-of-tree driver

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/sfc/ethtool.c | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/sfc/ethtool.c b/drivers/net/ethernet/sfc/ethtool.c
index 229428915aa8..3444dd618219 100644
--- a/drivers/net/ethernet/sfc/ethtool.c
+++ b/drivers/net/ethernet/sfc/ethtool.c
@@ -251,6 +251,9 @@ static void efx_fill_test(unsigned int test_index, u8 *strings, u64 *data,
  * @test_index:		Starting index of the test
  * @strings:		Ethtool strings, or %NULL
  * @data:		Ethtool test results, or %NULL
+ *
+ * Fill in a block of loopback self-test entries.  Return new test
+ * index.
  */
 static int efx_fill_loopback_test(struct efx_nic *efx,
 				  struct efx_loopback_self_tests *lb_tests,
@@ -290,6 +293,12 @@ static int efx_fill_loopback_test(struct efx_nic *efx,
  * @tests:		Efx self-test results structure, or %NULL
  * @strings:		Ethtool strings, or %NULL
  * @data:		Ethtool test results, or %NULL
+ *
+ * Get self-test number of strings, strings, and/or test results.
+ * Return number of strings (== number of test results).
+ *
+ * The reason for merging these three functions is to make sure that
+ * they can never be inconsistent.
  */
 static int efx_ethtool_fill_self_tests(struct efx_nic *efx,
 				       struct efx_self_tests *tests,
@@ -444,7 +453,7 @@ static void efx_ethtool_self_test(struct net_device *net_dev,
 {
 	struct efx_nic *efx = netdev_priv(net_dev);
 	struct efx_self_tests *efx_tests;
-	int already_up;
+	bool already_up;
 	int rc = -ENOMEM;
 
 	efx_tests = kzalloc(sizeof(*efx_tests), GFP_KERNEL);
@@ -453,7 +462,7 @@ static void efx_ethtool_self_test(struct net_device *net_dev,
 
 	if (efx->state != STATE_READY) {
 		rc = -EIO;
-		goto fail1;
+		goto out;
 	}
 
 	netif_info(efx, drv, efx->net_dev, "starting %sline testing\n",
@@ -466,7 +475,7 @@ static void efx_ethtool_self_test(struct net_device *net_dev,
 		if (rc) {
 			netif_err(efx, drv, efx->net_dev,
 				  "failed opening device.\n");
-			goto fail1;
+			goto out;
 		}
 	}
 
@@ -479,8 +488,7 @@ static void efx_ethtool_self_test(struct net_device *net_dev,
 		   rc == 0 ? "passed" : "failed",
 		   (test->flags & ETH_TEST_FL_OFFLINE) ? "off" : "on");
 
-fail1:
-	/* Fill ethtool results structures */
+out:
 	efx_ethtool_fill_self_tests(efx, efx_tests, NULL, data);
 	kfree(efx_tests);
 fail:
-- 
cgit v1.2.2


From 5eed1f68523c8cdeeafae24350200d47ddc293b7 Mon Sep 17 00:00:00 2001
From: Ben Hutchings <bhutchings@solarflare.com>
Date: Wed, 12 Feb 2014 19:00:28 +0000
Subject: sfc: Fail self-test with -EBUSY, not -EIO, if the device is busy

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/sfc/ethtool.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/sfc/ethtool.c b/drivers/net/ethernet/sfc/ethtool.c
index 3444dd618219..7d5cb86a47ef 100644
--- a/drivers/net/ethernet/sfc/ethtool.c
+++ b/drivers/net/ethernet/sfc/ethtool.c
@@ -461,7 +461,7 @@ static void efx_ethtool_self_test(struct net_device *net_dev,
 		goto fail;
 
 	if (efx->state != STATE_READY) {
-		rc = -EIO;
+		rc = -EBUSY;
 		goto out;
 	}
 
-- 
cgit v1.2.2


From 5b3b76085c68b33da6903f216ebc16903b199ac4 Mon Sep 17 00:00:00 2001
From: Ben Hutchings <bhutchings@solarflare.com>
Date: Wed, 12 Feb 2014 19:00:37 +0000
Subject: sfc: Add/remove blank lines to taste

Remove trailing blank lines in several files.
Use only one blank line between functions.
Add a blank line as a separator in a few places.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/sfc/ethtool.c    | 1 -
 drivers/net/ethernet/sfc/falcon.c     | 4 ++--
 drivers/net/ethernet/sfc/farch.c      | 2 --
 drivers/net/ethernet/sfc/net_driver.h | 1 -
 drivers/net/ethernet/sfc/nic.c        | 1 -
 5 files changed, 2 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/sfc/ethtool.c b/drivers/net/ethernet/sfc/ethtool.c
index 7d5cb86a47ef..89fcaffd7de2 100644
--- a/drivers/net/ethernet/sfc/ethtool.c
+++ b/drivers/net/ethernet/sfc/ethtool.c
@@ -699,7 +699,6 @@ static void efx_ethtool_get_pauseparam(struct net_device *net_dev,
 	pause->autoneg = !!(efx->wanted_fc & EFX_FC_AUTO);
 }
 
-
 static void efx_ethtool_get_wol(struct net_device *net_dev,
 				struct ethtool_wolinfo *wol)
 {
diff --git a/drivers/net/ethernet/sfc/falcon.c b/drivers/net/ethernet/sfc/falcon.c
index 18d6f761f4d0..72652f380243 100644
--- a/drivers/net/ethernet/sfc/falcon.c
+++ b/drivers/net/ethernet/sfc/falcon.c
@@ -422,7 +422,6 @@ static inline void falcon_irq_ack_a1(struct efx_nic *efx)
 	efx_readd(efx, &reg, FR_AA_WORK_AROUND_BROKEN_PCI_READS);
 }
 
-
 static irqreturn_t falcon_legacy_interrupt_a1(int irq, void *dev_id)
 {
 	struct efx_nic *efx = dev_id;
@@ -467,6 +466,7 @@ static irqreturn_t falcon_legacy_interrupt_a1(int irq, void *dev_id)
 		efx_schedule_channel_irq(efx_get_channel(efx, 1));
 	return IRQ_HANDLED;
 }
+
 /**************************************************************************
  *
  * RSS
@@ -1358,6 +1358,7 @@ static void falcon_reconfigure_mac_wrapper(struct efx_nic *efx)
 	case 100:   link_speed = 1; break;
 	default:    link_speed = 0; break;
 	}
+
 	/* MAC_LINK_STATUS controls MAC backpressure but doesn't work
 	 * as advertised.  Disable to ensure packets are not
 	 * indefinitely held and TX queue can be flushed at any point
@@ -2868,4 +2869,3 @@ const struct efx_nic_type falcon_b0_nic_type = {
 	.mcdi_max_ver = -1,
 	.max_rx_ip_filters = FR_BZ_RX_FILTER_TBL0_ROWS,
 };
-
diff --git a/drivers/net/ethernet/sfc/farch.c b/drivers/net/ethernet/sfc/farch.c
index f72489a105ca..aa1b169f45ec 100644
--- a/drivers/net/ethernet/sfc/farch.c
+++ b/drivers/net/ethernet/sfc/farch.c
@@ -311,7 +311,6 @@ static inline void efx_farch_push_tx_desc(struct efx_tx_queue *tx_queue,
  */
 void efx_farch_tx_write(struct efx_tx_queue *tx_queue)
 {
-
 	struct efx_tx_buffer *buffer;
 	efx_qword_t *txd;
 	unsigned write_ptr;
@@ -1609,7 +1608,6 @@ irqreturn_t efx_farch_msi_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-
 /* Setup RSS indirection table.
  * This maps from the hash value of the packet to RXQ
  */
diff --git a/drivers/net/ethernet/sfc/net_driver.h b/drivers/net/ethernet/sfc/net_driver.h
index af2b8c59a903..8a400a0595eb 100644
--- a/drivers/net/ethernet/sfc/net_driver.h
+++ b/drivers/net/ethernet/sfc/net_driver.h
@@ -1323,7 +1323,6 @@ static inline struct efx_rx_buffer *efx_rx_buffer(struct efx_rx_queue *rx_queue,
 	return &rx_queue->buffer[index];
 }
 
-
 /**
  * EFX_MAX_FRAME_LEN - calculate maximum frame length
  *
diff --git a/drivers/net/ethernet/sfc/nic.c b/drivers/net/ethernet/sfc/nic.c
index 79226b19e3c4..32d969e857f7 100644
--- a/drivers/net/ethernet/sfc/nic.c
+++ b/drivers/net/ethernet/sfc/nic.c
@@ -530,4 +530,3 @@ void efx_nic_fix_nodesc_drop_stat(struct efx_nic *efx, u64 *rx_nodesc_drops)
 	efx->rx_nodesc_drops_prev_state = !!(efx->net_dev->flags & IFF_UP);
 	*rx_nodesc_drops -= efx->rx_nodesc_drops_while_down;
 }
-
-- 
cgit v1.2.2


From 43b6329f982092d8fe5c953940609ca8ee3055df Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Tue, 11 Feb 2014 17:27:33 -0800
Subject: net: phy: use network device in phy_print_status

phy_print_status() currently uses dev_name(&phydev->dev) which will
usually result in printing something along those lines for Device Tree
aware drivers:

libphy: f0b60000.etherne:0a - Link is Down
libphy: f0ba0000.etherne:00 - Link is Up - 1000/Full

This is not terribly useful for network administrators or users since we
expect a network interface name to be able to correlate link events with
interfaces. Update phy_print_status() to use netdev_info() with
phydev->attached_dev which is the backing network device for our PHY
device. The leading dash is removed since netdev_info() prefixes the
messages with "<interface>: " already.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/phy.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 19c9eca0ef26..c35b2e73168a 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -45,12 +45,11 @@
 void phy_print_status(struct phy_device *phydev)
 {
 	if (phydev->link) {
-		pr_info("%s - Link is Up - %d/%s\n",
-			dev_name(&phydev->dev),
+		netdev_info(phydev->attached_dev, "Link is Up - %d/%s\n",
 			phydev->speed,
 			DUPLEX_FULL == phydev->duplex ? "Full" : "Half");
 	} else	{
-		pr_info("%s - Link is Down\n", dev_name(&phydev->dev));
+		netdev_info(phydev->attached_dev, "Link is Down\n");
 	}
 }
 EXPORT_SYMBOL(phy_print_status);
-- 
cgit v1.2.2


From df40cc887924f64810e2dc8bd810aec5b37061c9 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Tue, 11 Feb 2014 17:27:34 -0800
Subject: net: phy: update phy_print_status to show pause settings

Update phy_print_status() to also display the PHY device pause settings
(rx/tx or off).

Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/phy.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index c35b2e73168a..8ae22603b1b1 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -45,9 +45,11 @@
 void phy_print_status(struct phy_device *phydev)
 {
 	if (phydev->link) {
-		netdev_info(phydev->attached_dev, "Link is Up - %d/%s\n",
+		netdev_info(phydev->attached_dev,
+			"Link is Up - %d/%s - flow control %s\n",
 			phydev->speed,
-			DUPLEX_FULL == phydev->duplex ? "Full" : "Half");
+			DUPLEX_FULL == phydev->duplex ? "Full" : "Half",
+			phydev->pause ? "rx/tx" : "off");
 	} else	{
 		netdev_info(phydev->attached_dev, "Link is Down\n");
 	}
-- 
cgit v1.2.2


From 766d1d388e6e6bfda99a00d68ac9247a1c25a0d9 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Tue, 11 Feb 2014 17:27:35 -0800
Subject: net: phy: display human readable PHY speed settings

Use a convenience function: phy_speed_to_str() which will display human
readable speeds.

Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/phy.c | 24 ++++++++++++++++++++++--
 1 file changed, 22 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 8ae22603b1b1..36fc6e16b569 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -38,6 +38,26 @@
 
 #include <asm/irq.h>
 
+static const char *phy_speed_to_str(int speed)
+{
+	switch (speed) {
+	case SPEED_10:
+		return "10Mbps";
+	case SPEED_100:
+		return "100Mbps";
+	case SPEED_1000:
+		return "1Gbps";
+	case SPEED_2500:
+		return "2.5Gbps";
+	case SPEED_10000:
+		return "10Gbps";
+	case SPEED_UNKNOWN:
+		return "Unknown";
+	default:
+		return "Unsupported (update phy.c)";
+	}
+}
+
 /**
  * phy_print_status - Convenience function to print out the current phy status
  * @phydev: the phy_device struct
@@ -46,8 +66,8 @@ void phy_print_status(struct phy_device *phydev)
 {
 	if (phydev->link) {
 		netdev_info(phydev->attached_dev,
-			"Link is Up - %d/%s - flow control %s\n",
-			phydev->speed,
+			"Link is Up - %s/%s - flow control %s\n",
+			phy_speed_to_str(phydev->speed),
 			DUPLEX_FULL == phydev->duplex ? "Full" : "Half",
 			phydev->pause ? "rx/tx" : "off");
 	} else	{
-- 
cgit v1.2.2


From a9fa6e6ac29709e7a623b60695c172da675df045 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Tue, 11 Feb 2014 17:27:36 -0800
Subject: net: phy: add genphy_aneg_done()

In preparation for allowing PHY drivers to potentially override their
auto-negotiation done callback, move the contents of phy_aneg_done() to
genphy_aneg_done() since that function really is the generic
implementation based on the BMSR_ANEGCOMPLETE status.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/phy.c        |  4 +---
 drivers/net/phy/phy_device.c | 16 ++++++++++++++++
 2 files changed, 17 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 36fc6e16b569..db9c543bd2af 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -120,9 +120,7 @@ static int phy_config_interrupt(struct phy_device *phydev, u32 interrupts)
  */
 static inline int phy_aneg_done(struct phy_device *phydev)
 {
-	int retval = phy_read(phydev, MII_BMSR);
-
-	return (retval < 0) ? retval : (retval & BMSR_ANEGCOMPLETE);
+	return genphy_aneg_done(phydev);
 }
 
 /* A structure for mapping a particular speed and duplex
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 82514e72b3d8..4e7db726028f 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -865,6 +865,22 @@ int genphy_config_aneg(struct phy_device *phydev)
 }
 EXPORT_SYMBOL(genphy_config_aneg);
 
+/**
+ * genphy_aneg_done - return auto-negotiation status
+ * @phydev: target phy_device struct
+ *
+ * Description: Reads the status register and returns 0 either if
+ *   auto-negotiation is incomplete, or if there was an error.
+ *   Returns BMSR_ANEGCOMPLETE if auto-negotiation is done.
+ */
+int genphy_aneg_done(struct phy_device *phydev)
+{
+	int retval = phy_read(phydev, MII_BMSR);
+
+	return (retval < 0) ? retval : (retval & BMSR_ANEGCOMPLETE);
+}
+EXPORT_SYMBOL(genphy_aneg_done);
+
 static int gen10g_config_aneg(struct phy_device *phydev)
 {
 	return 0;
-- 
cgit v1.2.2


From 76a423a3f8f16bfc7fb86360a620be18c775b94d Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Tue, 11 Feb 2014 17:27:37 -0800
Subject: net: phy: allow driver to implement their own aneg_done

Some PHYs out there can be very quirky with respect to how they would
report the auto-negotiation is completed. Allow drivers to override the
generic aneg_done() implementation by providing their own.

Since not all drivers have been updated yet to use genphy_aneg_done() as
aneg_done() callback, we explicitely check that this callback is valid
before calling into it.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/phy.c        | 9 ++++++---
 drivers/net/phy/phy_device.c | 1 +
 2 files changed, 7 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index db9c543bd2af..2fa4611709a4 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -114,12 +114,15 @@ static int phy_config_interrupt(struct phy_device *phydev, u32 interrupts)
  * phy_aneg_done - return auto-negotiation status
  * @phydev: target phy_device struct
  *
- * Description: Reads the status register and returns 0 either if
- *   auto-negotiation is incomplete, or if there was an error.
- *   Returns BMSR_ANEGCOMPLETE if auto-negotiation is done.
+ * Description: Return the auto-negotiation status from this @phydev
+ * Returns > 0 on success or < 0 on error. 0 means that auto-negotiation
+ * is still pending.
  */
 static inline int phy_aneg_done(struct phy_device *phydev)
 {
+	if (phydev->drv->aneg_done)
+		return phydev->drv->aneg_done(phydev);
+
 	return genphy_aneg_done(phydev);
 }
 
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 4e7db726028f..7c184208ed4d 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1267,6 +1267,7 @@ static struct phy_driver genphy_driver[] = {
 	.config_init	= genphy_config_init,
 	.features	= 0,
 	.config_aneg	= genphy_config_aneg,
+	.aneg_done	= genphy_aneg_done,
 	.read_status	= genphy_read_status,
 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,
-- 
cgit v1.2.2


From ad033506f5061db818bab1cc07b2c3d8d477cf12 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Tue, 11 Feb 2014 17:27:38 -0800
Subject: net: phy: fix phy_{clear,config}_interrupt comment typos

The comments above phy_{clear,config}_interrupt used the word "on"
instead of "or", when talking about the return values of the functions,
fix these two typos.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/phy.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 2fa4611709a4..fc918b63dc65 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -83,7 +83,7 @@ EXPORT_SYMBOL(phy_print_status);
  * If the @phydev driver has an ack_interrupt function, call it to
  * ack and clear the phy device's interrupt.
  *
- * Returns 0 on success on < 0 on error.
+ * Returns 0 on success or < 0 on error.
  */
 static int phy_clear_interrupt(struct phy_device *phydev)
 {
@@ -98,7 +98,7 @@ static int phy_clear_interrupt(struct phy_device *phydev)
  * @phydev: the phy_device struct
  * @interrupts: interrupt flags to configure for this @phydev
  *
- * Returns 0 on success on < 0 on error.
+ * Returns 0 on success or < 0 on error.
  */
 static int phy_config_interrupt(struct phy_device *phydev, u32 interrupts)
 {
-- 
cgit v1.2.2


From 3d055d8d1c24093bdd40e000570a59b841c2bb0b Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Tue, 11 Feb 2014 17:27:40 -0800
Subject: net: phy: expose PHY device interface mode

Expose the PHY device interface mode through sysfs since this is an
useful piece of information for knowing how the attached networking
device will have configured its transmit/receive path.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/mdio_bus.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 71e49000fbf3..7c66ea095a46 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -432,8 +432,18 @@ phy_id_show(struct device *dev, struct device_attribute *attr, char *buf)
 }
 static DEVICE_ATTR_RO(phy_id);
 
+static ssize_t
+phy_interface_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct phy_device *phydev = to_phy_device(dev);
+
+	return sprintf(buf, "%s\n", phy_modes(phydev->interface));
+}
+static DEVICE_ATTR_RO(phy_interface);
+
 static struct attribute *mdio_dev_attrs[] = {
 	&dev_attr_phy_id.attr,
+	&dev_attr_phy_interface.attr,
 	NULL,
 };
 ATTRIBUTE_GROUPS(mdio_dev);
-- 
cgit v1.2.2


From b0ae009f3dc14643e56972cfc08c060dd72cc24d Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Tue, 11 Feb 2014 17:27:41 -0800
Subject: net: phy: add "has_fixups" boolean property

Add a boolean property which indicates if the PHY has had any fixup
routine ran on it. We are later going to use that boolean to expose it
as a sysfs property to help troubleshooting.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/phy_device.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net')

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 7c184208ed4d..c2d778d06405 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -139,6 +139,7 @@ static int phy_scan_fixups(struct phy_device *phydev)
 				mutex_unlock(&phy_fixup_lock);
 				return err;
 			}
+			phydev->has_fixups = true;
 		}
 	}
 	mutex_unlock(&phy_fixup_lock);
-- 
cgit v1.2.2


From 8bed1285b98e6a90403cdfe0500e8ad6bd8e8f1c Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Tue, 11 Feb 2014 17:27:42 -0800
Subject: net: phy: expose phydev->has_fixups to sysfs

Expose the PHY device has_fixups boolean as a sysfs property to help
troubleshooting PHY configurations.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/mdio_bus.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 7c66ea095a46..76f54b32a120 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -441,9 +441,19 @@ phy_interface_show(struct device *dev, struct device_attribute *attr, char *buf)
 }
 static DEVICE_ATTR_RO(phy_interface);
 
+static ssize_t
+phy_has_fixups_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct phy_device *phydev = to_phy_device(dev);
+
+	return sprintf(buf, "%d\n", phydev->has_fixups);
+}
+static DEVICE_ATTR_RO(phy_has_fixups);
+
 static struct attribute *mdio_dev_attrs[] = {
 	&dev_attr_phy_id.attr,
 	&dev_attr_phy_interface.attr,
+	&dev_attr_phy_has_fixups.attr,
 	NULL,
 };
 ATTRIBUTE_GROUPS(mdio_dev);
-- 
cgit v1.2.2


From 76ca70fabbdaa3d5318748921f79bfdeba7a2ed8 Mon Sep 17 00:00:00 2001
From: Yuval Mintz <yuvalmin@broadcom.com>
Date: Wed, 12 Feb 2014 18:19:49 +0200
Subject: bnx2x: [Debug] change verbosity of some prints

There are some debug prints (mostly iov/statistics related) which clobber
system logs whenever their verbosity level is set for an interface.
This patch puts harsher verbosity requirements for such debug prints to be
printed.

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x.h       | 17 +++++++++++++----
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c  |  6 +++---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c | 17 +++++++++--------
 3 files changed, 25 insertions(+), 15 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
index 391f29ef6d2e..ae91e8f43622 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -75,13 +75,22 @@ enum bnx2x_int_mode {
 #define BNX2X_MSG_DCB			0x8000000
 
 /* regular debug print */
+#define DP_INNER(fmt, ...)					\
+	pr_notice("[%s:%d(%s)]" fmt,				\
+		  __func__, __LINE__,				\
+		  bp->dev ? (bp->dev->name) : "?",		\
+		  ##__VA_ARGS__);
+
 #define DP(__mask, fmt, ...)					\
 do {								\
 	if (unlikely(bp->msg_enable & (__mask)))		\
-		pr_notice("[%s:%d(%s)]" fmt,			\
-			  __func__, __LINE__,			\
-			  bp->dev ? (bp->dev->name) : "?",	\
-			  ##__VA_ARGS__);			\
+		DP_INNER(fmt, ##__VA_ARGS__);			\
+} while (0)
+
+#define DP_AND(__mask, fmt, ...)				\
+do {								\
+	if (unlikely((bp->msg_enable & (__mask)) == __mask))	\
+		DP_INNER(fmt, ##__VA_ARGS__);			\
 } while (0)
 
 #define DP_CONT(__mask, fmt, ...)				\
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 7d4382286457..1b3dda49590a 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -5221,9 +5221,9 @@ static void bnx2x_eq_int(struct bnx2x *bp)
 			continue;
 
 		case EVENT_RING_OPCODE_STAT_QUERY:
-			DP(BNX2X_MSG_SP | BNX2X_MSG_STATS,
-			   "got statistics comp event %d\n",
-			   bp->stats_comp++);
+			DP_AND((BNX2X_MSG_SP | BNX2X_MSG_STATS),
+			       "got statistics comp event %d\n",
+			       bp->stats_comp++);
 			/* nothing to do with stats comp */
 			goto next_spqe;
 
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
index e42f48df6e94..37a9357ea147 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
@@ -2527,10 +2527,10 @@ void bnx2x_iov_adjust_stats_req(struct bnx2x *bp)
 	first_queue_query_index = BNX2X_FIRST_QUEUE_QUERY_IDX -
 		(is_fcoe ? 0 : 1);
 
-	DP(BNX2X_MSG_IOV,
-	   "BNX2X_NUM_ETH_QUEUES %d, is_fcoe %d, first_queue_query_index %d => determined the last non virtual statistics query index is %d. Will add queries on top of that\n",
-	   BNX2X_NUM_ETH_QUEUES(bp), is_fcoe, first_queue_query_index,
-	   first_queue_query_index + num_queues_req);
+	DP_AND((BNX2X_MSG_IOV | BNX2X_MSG_STATS),
+	       "BNX2X_NUM_ETH_QUEUES %d, is_fcoe %d, first_queue_query_index %d => determined the last non virtual statistics query index is %d. Will add queries on top of that\n",
+	       BNX2X_NUM_ETH_QUEUES(bp), is_fcoe, first_queue_query_index,
+	       first_queue_query_index + num_queues_req);
 
 	cur_data_offset = bp->fw_stats_data_mapping +
 		offsetof(struct bnx2x_fw_stats_data, queue_stats) +
@@ -2544,9 +2544,9 @@ void bnx2x_iov_adjust_stats_req(struct bnx2x *bp)
 		struct bnx2x_virtf *vf = BP_VF(bp, i);
 
 		if (vf->state != VF_ENABLED) {
-			DP(BNX2X_MSG_IOV,
-			   "vf %d not enabled so no stats for it\n",
-			   vf->abs_vfid);
+			DP_AND((BNX2X_MSG_IOV | BNX2X_MSG_STATS),
+			       "vf %d not enabled so no stats for it\n",
+			       vf->abs_vfid);
 			continue;
 		}
 
@@ -2597,7 +2597,8 @@ void bnx2x_iov_sp_task(struct bnx2x *bp)
 	/* Iterate over all VFs and invoke state transition for VFs with
 	 * 'in-progress' slow-path operations
 	 */
-	DP(BNX2X_MSG_IOV, "searching for pending vf operations\n");
+	DP_AND((BNX2X_MSG_IOV | BNX2X_MSG_SP),
+	       "searching for pending vf operations\n");
 	for_each_vf(bp, i) {
 		struct bnx2x_virtf *vf = BP_VF(bp, i);
 
-- 
cgit v1.2.2


From 3565b66d49dfd250fa0fb14905bf0f50a2fb134b Mon Sep 17 00:00:00 2001
From: Yuval Mintz <yuvalmin@broadcom.com>
Date: Wed, 12 Feb 2014 18:19:50 +0200
Subject: bnx2x: Remove unused iov code

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c | 10 ----------
 1 file changed, 10 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
index 37a9357ea147..5c4980c66417 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
@@ -3075,16 +3075,6 @@ static inline void bnx2x_vf_get_sbdf(struct bnx2x *bp,
 	*sbdf = vf->devfn | (vf->bus << 8);
 }
 
-static inline void bnx2x_vf_get_bars(struct bnx2x *bp, struct bnx2x_virtf *vf,
-		       struct bnx2x_vf_bar_info *bar_info)
-{
-	int n;
-
-	bar_info->nr_bars = bp->vfdb->sriov.nres;
-	for (n = 0; n < bar_info->nr_bars; n++)
-		bar_info->bars[n] = vf->bars[n];
-}
-
 void bnx2x_lock_vf_pf_channel(struct bnx2x *bp, struct bnx2x_virtf *vf,
 			      enum channel_tlvs tlv)
 {
-- 
cgit v1.2.2


From f96d8d8577f8b99125d576ddf0321fee996ed54b Mon Sep 17 00:00:00 2001
From: Ariel Elior <ariele@broadcom.com>
Date: Wed, 12 Feb 2014 18:19:51 +0200
Subject: bnx2x: Remove unnecessary internal mem config

Latest FW performs this autonomously, makes this code surplus.

Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h |  1 -
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c    | 12 ------------
 2 files changed, 13 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h
index 84aecdf06f7a..95dc36543548 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h
@@ -87,7 +87,6 @@
 	(IRO[156].base + ((vfId) * IRO[156].m1))
 #define CSTORM_VF_TO_PF_OFFSET(funcId) \
 	(IRO[150].base + ((funcId) * IRO[150].m1))
-#define TSTORM_ACCEPT_CLASSIFY_FAILED_OFFSET (IRO[204].base)
 #define TSTORM_APPROXIMATE_MATCH_MULTICAST_FILTERING_OFFSET(pfId) \
 	(IRO[203].base + ((pfId) * IRO[203].m1))
 #define TSTORM_ASSERT_LIST_INDEX_OFFSET	(IRO[102].base)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 1b3dda49590a..38f04018110b 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -6005,18 +6005,6 @@ static void bnx2x_init_internal_common(struct bnx2x *bp)
 {
 	int i;
 
-	if (IS_MF_SI(bp))
-		/*
-		 * In switch independent mode, the TSTORM needs to accept
-		 * packets that failed classification, since approximate match
-		 * mac addresses aren't written to NIG LLH
-		 */
-		REG_WR8(bp, BAR_TSTRORM_INTMEM +
-			    TSTORM_ACCEPT_CLASSIFY_FAILED_OFFSET, 2);
-	else if (!CHIP_IS_E1(bp)) /* 57710 doesn't support MF */
-		REG_WR8(bp, BAR_TSTRORM_INTMEM +
-			    TSTORM_ACCEPT_CLASSIFY_FAILED_OFFSET, 0);
-
 	/* Zero this manually as its initialization is
 	   currently missing in the initTool */
 	for (i = 0; i < (USTORM_AGG_DATA_SIZE >> 2); i++)
-- 
cgit v1.2.2


From ba72f32cb8ad1963ba55b30860971f4e2b0ec5e8 Mon Sep 17 00:00:00 2001
From: Yuval Mintz <yuvalmin@broadcom.com>
Date: Wed, 12 Feb 2014 18:19:52 +0200
Subject: bnx2x: Semantic Validate vlan/mac changes

This is purely semantic - break the flow in which PF validates the VF
classification filtering requirement is valid into several sub-functions
for better readable code.

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c | 51 +++++++++++++++++++-----
 1 file changed, 42 insertions(+), 9 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c
index 3fa6c2a2a5a9..ebad48a330e7 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c
@@ -1694,16 +1694,12 @@ static int bnx2x_vfop_mbx_qfilters_cmd(struct bnx2x *bp,
 	return -ENOMEM;
 }
 
-static void bnx2x_vf_mbx_set_q_filters(struct bnx2x *bp,
-				       struct bnx2x_virtf *vf,
-				       struct bnx2x_vf_mbx *mbx)
+static int bnx2x_filters_validate_mac(struct bnx2x *bp,
+				      struct bnx2x_virtf *vf,
+				      struct vfpf_set_q_filters_tlv *filters)
 {
-	struct vfpf_set_q_filters_tlv *filters = &mbx->msg->req.set_q_filters;
 	struct pf_vf_bulletin_content *bulletin = BP_VF_BULLETIN(bp, vf->index);
-	struct bnx2x_vfop_cmd cmd = {
-		.done = bnx2x_vf_mbx_resp,
-		.block = false,
-	};
+	int rc = 0;
 
 	/* if a mac was already set for this VF via the set vf mac ndo, we only
 	 * accept mac configurations of that mac. Why accept them at all?
@@ -1716,6 +1712,7 @@ static void bnx2x_vf_mbx_set_q_filters(struct bnx2x *bp,
 			BNX2X_ERR("VF[%d] requested the addition of multiple macs after set_vf_mac ndo was called\n",
 				  vf->abs_vfid);
 			vf->op_rc = -EPERM;
+			rc = -EPERM;
 			goto response;
 		}
 
@@ -1726,9 +1723,22 @@ static void bnx2x_vf_mbx_set_q_filters(struct bnx2x *bp,
 				  vf->abs_vfid);
 
 			vf->op_rc = -EPERM;
+			rc = -EPERM;
 			goto response;
 		}
 	}
+
+response:
+	return rc;
+}
+
+static int bnx2x_filters_validate_vlan(struct bnx2x *bp,
+				       struct bnx2x_virtf *vf,
+				       struct vfpf_set_q_filters_tlv *filters)
+{
+	struct pf_vf_bulletin_content *bulletin = BP_VF_BULLETIN(bp, vf->index);
+	int rc = 0;
+
 	/* if vlan was set by hypervisor we don't allow guest to config vlan */
 	if (bulletin->valid_bitmap & 1 << VLAN_VALID) {
 		int i;
@@ -1740,13 +1750,36 @@ static void bnx2x_vf_mbx_set_q_filters(struct bnx2x *bp,
 				BNX2X_ERR("VF[%d] attempted to configure vlan but one was already set by Hypervisor. Aborting request\n",
 					  vf->abs_vfid);
 				vf->op_rc = -EPERM;
+				rc = -EPERM;
 				goto response;
 			}
 		}
 	}
 
 	/* verify vf_qid */
-	if (filters->vf_qid > vf_rxq_count(vf))
+	if (filters->vf_qid > vf_rxq_count(vf)) {
+		rc = -EPERM;
+		goto response;
+	}
+
+response:
+	return rc;
+}
+
+static void bnx2x_vf_mbx_set_q_filters(struct bnx2x *bp,
+				       struct bnx2x_virtf *vf,
+				       struct bnx2x_vf_mbx *mbx)
+{
+	struct vfpf_set_q_filters_tlv *filters = &mbx->msg->req.set_q_filters;
+	struct bnx2x_vfop_cmd cmd = {
+		.done = bnx2x_vf_mbx_resp,
+		.block = false,
+	};
+
+	if (bnx2x_filters_validate_mac(bp, vf, filters))
+		goto response;
+
+	if (bnx2x_filters_validate_vlan(bp, vf, filters))
 		goto response;
 
 	DP(BNX2X_MSG_IOV, "VF[%d] Q_FILTERS: queue[%d]\n",
-- 
cgit v1.2.2


From 14a94ebd48c12f1aee7495c1a1518c33efd3647c Mon Sep 17 00:00:00 2001
From: Michal Kalderon <michals@broadcom.com>
Date: Wed, 12 Feb 2014 18:19:53 +0200
Subject: bnx2x: Add support in PF driver for RSC

This provides PF-side support for VFs assigned to a VM running windows
2012 with the RSC feature enabled.

Signed-off-by: Michal Kalderon <michals@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x.h       |   1 +
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c  |  21 +++-
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c    | 145 +++++++++++++++-------
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h    |  19 +++
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c |  82 ++++++++++++
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h |  12 ++
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c  |  75 ++++++++++-
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h  |  22 ++++
 8 files changed, 329 insertions(+), 48 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
index ae91e8f43622..c871d19ab6e1 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -1270,6 +1270,7 @@ struct bnx2x_slowpath {
 	union {
 		struct client_init_ramrod_data  init_data;
 		struct client_update_ramrod_data update_data;
+		struct tpa_update_ramrod_data tpa_data;
 	} q_rdata;
 
 	union {
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 38f04018110b..56a7d3f2128a 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -1814,6 +1814,11 @@ void bnx2x_sp_event(struct bnx2x_fastpath *fp, union eth_rx_cqe *rr_cqe)
 		drv_cmd = BNX2X_Q_CMD_EMPTY;
 		break;
 
+	case (RAMROD_CMD_ID_ETH_TPA_UPDATE):
+		DP(BNX2X_MSG_SP, "got tpa update ramrod CID=%d\n", cid);
+		drv_cmd = BNX2X_Q_CMD_UPDATE_TPA;
+		break;
+
 	default:
 		BNX2X_ERR("unexpected MC reply (%d) on fp[%d]\n",
 			  command, fp->index);
@@ -3644,10 +3649,18 @@ int bnx2x_sp_post(struct bnx2x *bp, int command, int cid,
 			cpu_to_le32((command << SPE_HDR_CMD_ID_SHIFT) |
 				    HW_CID(bp, cid));
 
-	type = (cmd_type << SPE_HDR_CONN_TYPE_SHIFT) & SPE_HDR_CONN_TYPE;
-
-	type |= ((BP_FUNC(bp) << SPE_HDR_FUNCTION_ID_SHIFT) &
-		 SPE_HDR_FUNCTION_ID);
+	/* In some cases, type may already contain the func-id
+	 * mainly in SRIOV related use cases, so we add it here only
+	 * if it's not already set.
+	 */
+	if (!(cmd_type & SPE_HDR_FUNCTION_ID)) {
+		type = (cmd_type << SPE_HDR_CONN_TYPE_SHIFT) &
+			SPE_HDR_CONN_TYPE;
+		type |= ((BP_FUNC(bp) << SPE_HDR_FUNCTION_ID_SHIFT) &
+			 SPE_HDR_FUNCTION_ID);
+	} else {
+		type = cmd_type;
+	}
 
 	spe->hdr.type = cpu_to_le16(type);
 
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
index 0fb6ff2ac8e3..270ba195a56b 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
@@ -2277,11 +2277,11 @@ static int bnx2x_set_rx_mode_e2(struct bnx2x *bp,
 			 data->header.rule_cnt, p->rx_accept_flags,
 			 p->tx_accept_flags);
 
-	/* No need for an explicit memory barrier here as long we would
-	 * need to ensure the ordering of writing to the SPQ element
+	/* No need for an explicit memory barrier here as long as we
+	 * ensure the ordering of writing to the SPQ element
 	 * and updating of the SPQ producer which involves a memory
-	 * read and we will have to put a full memory barrier there
-	 * (inside bnx2x_sp_post()).
+	 * read. If the memory read is removed we will have to put a
+	 * full memory barrier there (inside bnx2x_sp_post()).
 	 */
 
 	/* Send a ramrod */
@@ -2982,11 +2982,11 @@ static int bnx2x_mcast_setup_e2(struct bnx2x *bp,
 		raw->clear_pending(raw);
 		return 0;
 	} else {
-		/* No need for an explicit memory barrier here as long we would
-		 * need to ensure the ordering of writing to the SPQ element
+		/* No need for an explicit memory barrier here as long as we
+		 * ensure the ordering of writing to the SPQ element
 		 * and updating of the SPQ producer which involves a memory
-		 * read and we will have to put a full memory barrier there
-		 * (inside bnx2x_sp_post()).
+		 * read. If the memory read is removed we will have to put a
+		 * full memory barrier there (inside bnx2x_sp_post()).
 		 */
 
 		/* Send a ramrod */
@@ -3466,11 +3466,11 @@ static int bnx2x_mcast_setup_e1(struct bnx2x *bp,
 		raw->clear_pending(raw);
 		return 0;
 	} else {
-		/* No need for an explicit memory barrier here as long we would
-		 * need to ensure the ordering of writing to the SPQ element
+		/* No need for an explicit memory barrier here as long as we
+		 * ensure the ordering of writing to the SPQ element
 		 * and updating of the SPQ producer which involves a memory
-		 * read and we will have to put a full memory barrier there
-		 * (inside bnx2x_sp_post()).
+		 * read. If the memory read is removed we will have to put a
+		 * full memory barrier there (inside bnx2x_sp_post()).
 		 */
 
 		/* Send a ramrod */
@@ -4091,11 +4091,11 @@ static int bnx2x_setup_rss(struct bnx2x *bp,
 		data->capabilities |= ETH_RSS_UPDATE_RAMROD_DATA_UPDATE_RSS_KEY;
 	}
 
-	/* No need for an explicit memory barrier here as long we would
-	 * need to ensure the ordering of writing to the SPQ element
+	/* No need for an explicit memory barrier here as long as we
+	 * ensure the ordering of writing to the SPQ element
 	 * and updating of the SPQ producer which involves a memory
-	 * read and we will have to put a full memory barrier there
-	 * (inside bnx2x_sp_post()).
+	 * read. If the memory read is removed we will have to put a
+	 * full memory barrier there (inside bnx2x_sp_post()).
 	 */
 
 	/* Send a ramrod */
@@ -4587,13 +4587,12 @@ static inline int bnx2x_q_send_setup_e1x(struct bnx2x *bp,
 	/* Fill the ramrod data */
 	bnx2x_q_fill_setup_data_cmn(bp, params, rdata);
 
-	/* No need for an explicit memory barrier here as long we would
-	 * need to ensure the ordering of writing to the SPQ element
+	/* No need for an explicit memory barrier here as long as we
+	 * ensure the ordering of writing to the SPQ element
 	 * and updating of the SPQ producer which involves a memory
-	 * read and we will have to put a full memory barrier there
-	 * (inside bnx2x_sp_post()).
+	 * read. If the memory read is removed we will have to put a
+	 * full memory barrier there (inside bnx2x_sp_post()).
 	 */
-
 	return bnx2x_sp_post(bp, ramrod, o->cids[BNX2X_PRIMARY_CID_INDEX],
 			     U64_HI(data_mapping),
 			     U64_LO(data_mapping), ETH_CONNECTION_TYPE);
@@ -4615,13 +4614,12 @@ static inline int bnx2x_q_send_setup_e2(struct bnx2x *bp,
 	bnx2x_q_fill_setup_data_cmn(bp, params, rdata);
 	bnx2x_q_fill_setup_data_e2(bp, params, rdata);
 
-	/* No need for an explicit memory barrier here as long we would
-	 * need to ensure the ordering of writing to the SPQ element
+	/* No need for an explicit memory barrier here as long as we
+	 * ensure the ordering of writing to the SPQ element
 	 * and updating of the SPQ producer which involves a memory
-	 * read and we will have to put a full memory barrier there
-	 * (inside bnx2x_sp_post()).
+	 * read. If the memory read is removed we will have to put a
+	 * full memory barrier there (inside bnx2x_sp_post()).
 	 */
-
 	return bnx2x_sp_post(bp, ramrod, o->cids[BNX2X_PRIMARY_CID_INDEX],
 			     U64_HI(data_mapping),
 			     U64_LO(data_mapping), ETH_CONNECTION_TYPE);
@@ -4659,13 +4657,12 @@ static inline int bnx2x_q_send_setup_tx_only(struct bnx2x *bp,
 			 o->cids[cid_index], rdata->general.client_id,
 			 rdata->general.sp_client_id, rdata->general.cos);
 
-	/* No need for an explicit memory barrier here as long we would
-	 * need to ensure the ordering of writing to the SPQ element
+	/* No need for an explicit memory barrier here as long as we
+	 * ensure the ordering of writing to the SPQ element
 	 * and updating of the SPQ producer which involves a memory
-	 * read and we will have to put a full memory barrier there
-	 * (inside bnx2x_sp_post()).
+	 * read. If the memory read is removed we will have to put a
+	 * full memory barrier there (inside bnx2x_sp_post()).
 	 */
-
 	return bnx2x_sp_post(bp, ramrod, o->cids[cid_index],
 			     U64_HI(data_mapping),
 			     U64_LO(data_mapping), ETH_CONNECTION_TYPE);
@@ -4760,13 +4757,12 @@ static inline int bnx2x_q_send_update(struct bnx2x *bp,
 	/* Fill the ramrod data */
 	bnx2x_q_fill_update_data(bp, o, update_params, rdata);
 
-	/* No need for an explicit memory barrier here as long we would
-	 * need to ensure the ordering of writing to the SPQ element
+	/* No need for an explicit memory barrier here as long as we
+	 * ensure the ordering of writing to the SPQ element
 	 * and updating of the SPQ producer which involves a memory
-	 * read and we will have to put a full memory barrier there
-	 * (inside bnx2x_sp_post()).
+	 * read. If the memory read is removed we will have to put a
+	 * full memory barrier there (inside bnx2x_sp_post()).
 	 */
-
 	return bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_CLIENT_UPDATE,
 			     o->cids[cid_index], U64_HI(data_mapping),
 			     U64_LO(data_mapping), ETH_CONNECTION_TYPE);
@@ -4813,11 +4809,62 @@ static inline int bnx2x_q_send_activate(struct bnx2x *bp,
 	return bnx2x_q_send_update(bp, params);
 }
 
+static void bnx2x_q_fill_update_tpa_data(struct bnx2x *bp,
+				struct bnx2x_queue_sp_obj *obj,
+				struct bnx2x_queue_update_tpa_params *params,
+				struct tpa_update_ramrod_data *data)
+{
+	data->client_id = obj->cl_id;
+	data->complete_on_both_clients = params->complete_on_both_clients;
+	data->dont_verify_rings_pause_thr_flg =
+		params->dont_verify_thr;
+	data->max_agg_size = cpu_to_le16(params->max_agg_sz);
+	data->max_sges_for_packet = params->max_sges_pkt;
+	data->max_tpa_queues = params->max_tpa_queues;
+	data->sge_buff_size = cpu_to_le16(params->sge_buff_sz);
+	data->sge_page_base_hi = cpu_to_le32(U64_HI(params->sge_map));
+	data->sge_page_base_lo = cpu_to_le32(U64_LO(params->sge_map));
+	data->sge_pause_thr_high = cpu_to_le16(params->sge_pause_thr_high);
+	data->sge_pause_thr_low = cpu_to_le16(params->sge_pause_thr_low);
+	data->tpa_mode = params->tpa_mode;
+	data->update_ipv4 = params->update_ipv4;
+	data->update_ipv6 = params->update_ipv6;
+}
+
 static inline int bnx2x_q_send_update_tpa(struct bnx2x *bp,
 					struct bnx2x_queue_state_params *params)
 {
-	/* TODO: Not implemented yet. */
-	return -1;
+	struct bnx2x_queue_sp_obj *o = params->q_obj;
+	struct tpa_update_ramrod_data *rdata =
+		(struct tpa_update_ramrod_data *)o->rdata;
+	dma_addr_t data_mapping = o->rdata_mapping;
+	struct bnx2x_queue_update_tpa_params *update_tpa_params =
+		&params->params.update_tpa;
+	u16 type;
+
+	/* Clear the ramrod data */
+	memset(rdata, 0, sizeof(*rdata));
+
+	/* Fill the ramrod data */
+	bnx2x_q_fill_update_tpa_data(bp, o, update_tpa_params, rdata);
+
+	/* Add the function id inside the type, so that sp post function
+	 * doesn't automatically add the PF func-id, this is required
+	 * for operations done by PFs on behalf of their VFs
+	 */
+	type = ETH_CONNECTION_TYPE |
+		((o->func_id) << SPE_HDR_FUNCTION_ID_SHIFT);
+
+	/* No need for an explicit memory barrier here as long as we
+	 * ensure the ordering of writing to the SPQ element
+	 * and updating of the SPQ producer which involves a memory
+	 * read. If the memory read is removed we will have to put a
+	 * full memory barrier there (inside bnx2x_sp_post()).
+	 */
+	return bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_TPA_UPDATE,
+			     o->cids[BNX2X_PRIMARY_CID_INDEX],
+			     U64_HI(data_mapping),
+			     U64_LO(data_mapping), type);
 }
 
 static inline int bnx2x_q_send_halt(struct bnx2x *bp,
@@ -5647,6 +5694,12 @@ static inline int bnx2x_func_send_switch_update(struct bnx2x *bp,
 	rdata->tx_switch_suspend = switch_update_params->suspend;
 	rdata->echo = SWITCH_UPDATE;
 
+	/* No need for an explicit memory barrier here as long as we
+	 * ensure the ordering of writing to the SPQ element
+	 * and updating of the SPQ producer which involves a memory
+	 * read. If the memory read is removed we will have to put a
+	 * full memory barrier there (inside bnx2x_sp_post()).
+	 */
 	return bnx2x_sp_post(bp, RAMROD_CMD_ID_COMMON_FUNCTION_UPDATE, 0,
 			     U64_HI(data_mapping),
 			     U64_LO(data_mapping), NONE_CONNECTION_TYPE);
@@ -5674,11 +5727,11 @@ static inline int bnx2x_func_send_afex_update(struct bnx2x *bp,
 	rdata->allowed_priorities = afex_update_params->allowed_priorities;
 	rdata->echo = AFEX_UPDATE;
 
-	/*  No need for an explicit memory barrier here as long we would
-	 *  need to ensure the ordering of writing to the SPQ element
-	 *  and updating of the SPQ producer which involves a memory
-	 *  read and we will have to put a full memory barrier there
-	 *  (inside bnx2x_sp_post()).
+	/* No need for an explicit memory barrier here as long as we
+	 * ensure the ordering of writing to the SPQ element
+	 * and updating of the SPQ producer which involves a memory
+	 * read. If the memory read is removed we will have to put a
+	 * full memory barrier there (inside bnx2x_sp_post()).
 	 */
 	DP(BNX2X_MSG_SP,
 	   "afex: sending func_update vif_id 0x%x dvlan 0x%x prio 0x%x\n",
@@ -5763,6 +5816,12 @@ static inline int bnx2x_func_send_tx_start(struct bnx2x *bp,
 		rdata->traffic_type_to_priority_cos[i] =
 			tx_start_params->traffic_type_to_priority_cos[i];
 
+	/* No need for an explicit memory barrier here as long as we
+	 * ensure the ordering of writing to the SPQ element
+	 * and updating of the SPQ producer which involves a memory
+	 * read. If the memory read is removed we will have to put a
+	 * full memory barrier there (inside bnx2x_sp_post()).
+	 */
 	return bnx2x_sp_post(bp, RAMROD_CMD_ID_COMMON_START_TRAFFIC, 0,
 			     U64_HI(data_mapping),
 			     U64_LO(data_mapping), NONE_CONNECTION_TYPE);
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h
index 00d7f214a40a..f7af21fc8ecc 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h
@@ -893,6 +893,24 @@ struct bnx2x_queue_update_params {
 	u8		cid_index;
 };
 
+struct bnx2x_queue_update_tpa_params {
+	dma_addr_t sge_map;
+	u8 update_ipv4;
+	u8 update_ipv6;
+	u8 max_tpa_queues;
+	u8 max_sges_pkt;
+	u8 complete_on_both_clients;
+	u8 dont_verify_thr;
+	u8 tpa_mode;
+	u8 _pad;
+
+	u16 sge_buff_sz;
+	u16 max_agg_sz;
+
+	u16 sge_pause_thr_low;
+	u16 sge_pause_thr_high;
+};
+
 struct rxq_pause_params {
 	u16		bd_th_lo;
 	u16		bd_th_hi;
@@ -987,6 +1005,7 @@ struct bnx2x_queue_state_params {
 	/* Params according to the current command */
 	union {
 		struct bnx2x_queue_update_params	update;
+		struct bnx2x_queue_update_tpa_params    update_tpa;
 		struct bnx2x_queue_setup_params		setup;
 		struct bnx2x_queue_init_params		init;
 		struct bnx2x_queue_setup_tx_only_params	tx_only;
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
index 5c4980c66417..a4a3d7e04df9 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
@@ -176,6 +176,11 @@ enum bnx2x_vfop_rss_state {
 	   BNX2X_VFOP_RSS_DONE
 };
 
+enum bnx2x_vfop_tpa_state {
+	   BNX2X_VFOP_TPA_CONFIG,
+	   BNX2X_VFOP_TPA_DONE
+};
+
 #define bnx2x_vfop_reset_wq(vf)	atomic_set(&vf->op_in_progress, 0)
 
 void bnx2x_vfop_qctor_dump_tx(struct bnx2x *bp, struct bnx2x_virtf *vf,
@@ -3047,6 +3052,83 @@ int bnx2x_vfop_rss_cmd(struct bnx2x *bp,
 	return -ENOMEM;
 }
 
+/* VFOP tpa update, send update on all queues */
+static void bnx2x_vfop_tpa(struct bnx2x *bp, struct bnx2x_virtf *vf)
+{
+	struct bnx2x_vfop *vfop = bnx2x_vfop_cur(bp, vf);
+	struct bnx2x_vfop_args_tpa *tpa_args = &vfop->args.tpa;
+	enum bnx2x_vfop_tpa_state state = vfop->state;
+
+	bnx2x_vfop_reset_wq(vf);
+
+	if (vfop->rc < 0)
+		goto op_err;
+
+	DP(BNX2X_MSG_IOV, "vf[%d:%d] STATE: %d\n",
+	   vf->abs_vfid, tpa_args->qid,
+	   state);
+
+	switch (state) {
+	case BNX2X_VFOP_TPA_CONFIG:
+
+		if (tpa_args->qid < vf_rxq_count(vf)) {
+			struct bnx2x_queue_state_params *qstate =
+				&vf->op_params.qstate;
+
+			qstate->q_obj = &bnx2x_vfq(vf, tpa_args->qid, sp_obj);
+
+			/* The only thing that changes for the ramrod params
+			 * between calls is the sge_map
+			 */
+			qstate->params.update_tpa.sge_map =
+				tpa_args->sge_map[tpa_args->qid];
+
+			DP(BNX2X_MSG_IOV, "sge_addr[%d] %08x:%08x\n",
+			   tpa_args->qid,
+			   U64_HI(qstate->params.update_tpa.sge_map),
+			   U64_LO(qstate->params.update_tpa.sge_map));
+			qstate->cmd = BNX2X_Q_CMD_UPDATE_TPA;
+			vfop->rc = bnx2x_queue_state_change(bp, qstate);
+
+			tpa_args->qid++;
+			bnx2x_vfop_finalize(vf, vfop->rc, VFOP_CONT);
+		}
+		vfop->state = BNX2X_VFOP_TPA_DONE;
+		vfop->rc = 0;
+		bnx2x_vfop_finalize(vf, vfop->rc, VFOP_DONE);
+op_err:
+		BNX2X_ERR("TPA update error: rc %d\n", vfop->rc);
+op_done:
+	case BNX2X_VFOP_TPA_DONE:
+		bnx2x_vfop_end(bp, vf, vfop);
+		return;
+	default:
+		bnx2x_vfop_default(state);
+	}
+op_pending:
+	return;
+}
+
+int bnx2x_vfop_tpa_cmd(struct bnx2x *bp,
+			struct bnx2x_virtf *vf,
+			struct bnx2x_vfop_cmd *cmd,
+			struct vfpf_tpa_tlv *tpa_tlv)
+{
+	struct bnx2x_vfop *vfop = bnx2x_vfop_add(bp, vf);
+
+	if (vfop) {
+		vfop->args.qx.qid = 0; /* loop */
+		memcpy(&vfop->args.tpa.sge_map,
+		       tpa_tlv->tpa_client_info.sge_addr,
+		       sizeof(vfop->args.tpa.sge_map));
+		bnx2x_vfop_opset(BNX2X_VFOP_TPA_CONFIG,
+				 bnx2x_vfop_tpa, cmd->done);
+		return bnx2x_vfop_transition(bp, vf, bnx2x_vfop_tpa,
+					     cmd->block);
+	}
+	return -ENOMEM;
+}
+
 /* VF release ~ VF close + VF release-resources
  * Release is the ultimate SW shutdown and is called whenever an
  * irrecoverable error is encountered.
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h
index d9fcca1b5a9d..9b60e80c89fe 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h
@@ -100,6 +100,7 @@ union bnx2x_vfop_params {
 	struct bnx2x_mcast_ramrod_params	mcast;
 	struct bnx2x_config_rss_params		rss;
 	struct bnx2x_vfop_qctor_params		qctor;
+	struct bnx2x_queue_state_params		qstate;
 };
 
 /* forward */
@@ -166,6 +167,11 @@ struct bnx2x_vfop_args_filters {
 	atomic_t *credit;	/* non NULL means 'don't consume credit' */
 };
 
+struct bnx2x_vfop_args_tpa {
+	int	   qid;
+	dma_addr_t sge_map[PFVF_MAX_QUEUES_PER_VF];
+};
+
 union bnx2x_vfop_args {
 	struct bnx2x_vfop_args_mcast	mc_list;
 	struct bnx2x_vfop_args_qctor	qctor;
@@ -173,6 +179,7 @@ union bnx2x_vfop_args {
 	struct bnx2x_vfop_args_defvlan	defvlan;
 	struct bnx2x_vfop_args_qx	qx;
 	struct bnx2x_vfop_args_filters	filters;
+	struct bnx2x_vfop_args_tpa	tpa;
 };
 
 struct bnx2x_vfop {
@@ -704,6 +711,11 @@ int bnx2x_vfop_rss_cmd(struct bnx2x *bp,
 		       struct bnx2x_virtf *vf,
 		       struct bnx2x_vfop_cmd *cmd);
 
+int bnx2x_vfop_tpa_cmd(struct bnx2x *bp,
+		       struct bnx2x_virtf *vf,
+		       struct bnx2x_vfop_cmd *cmd,
+		       struct vfpf_tpa_tlv *tpa_tlv);
+
 /* VF release ~ VF close + VF release-resources
  *
  * Release is the ultimate SW shutdown and is called whenever an
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c
index ebad48a330e7..dfaed288becd 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c
@@ -1159,7 +1159,8 @@ static void bnx2x_vf_mbx_acquire_resp(struct bnx2x *bp, struct bnx2x_virtf *vf,
 	resp->pfdev_info.db_size = bp->db_size;
 	resp->pfdev_info.indices_per_sb = HC_SB_MAX_INDICES_E2;
 	resp->pfdev_info.pf_cap = (PFVF_CAP_RSS |
-				   /* PFVF_CAP_DHC |*/ PFVF_CAP_TPA);
+				   PFVF_CAP_TPA |
+				   PFVF_CAP_TPA_UPDATE);
 	bnx2x_fill_fw_str(bp, resp->pfdev_info.fw_ver,
 			  sizeof(resp->pfdev_info.fw_ver));
 
@@ -1910,6 +1911,75 @@ mbx_resp:
 		bnx2x_vf_mbx_resp(bp, vf);
 }
 
+static int bnx2x_validate_tpa_params(struct bnx2x *bp,
+				       struct vfpf_tpa_tlv *tpa_tlv)
+{
+	int rc = 0;
+
+	if (tpa_tlv->tpa_client_info.max_sges_for_packet >
+	    U_ETH_MAX_SGES_FOR_PACKET) {
+		rc = -EINVAL;
+		BNX2X_ERR("TPA update: max_sges received %d, max is %d\n",
+			  tpa_tlv->tpa_client_info.max_sges_for_packet,
+			  U_ETH_MAX_SGES_FOR_PACKET);
+	}
+
+	if (tpa_tlv->tpa_client_info.max_tpa_queues > MAX_AGG_QS(bp)) {
+		rc = -EINVAL;
+		BNX2X_ERR("TPA update: max_tpa_queues received %d, max is %d\n",
+			  tpa_tlv->tpa_client_info.max_tpa_queues,
+			  MAX_AGG_QS(bp));
+	}
+
+	return rc;
+}
+
+static void bnx2x_vf_mbx_update_tpa(struct bnx2x *bp, struct bnx2x_virtf *vf,
+				    struct bnx2x_vf_mbx *mbx)
+{
+	struct bnx2x_vfop_cmd cmd = {
+		.done = bnx2x_vf_mbx_resp,
+		.block = false,
+	};
+	struct bnx2x_queue_update_tpa_params *vf_op_params =
+		&vf->op_params.qstate.params.update_tpa;
+	struct vfpf_tpa_tlv *tpa_tlv = &mbx->msg->req.update_tpa;
+
+	memset(vf_op_params, 0, sizeof(*vf_op_params));
+
+	if (bnx2x_validate_tpa_params(bp, tpa_tlv))
+		goto mbx_resp;
+
+	vf_op_params->complete_on_both_clients =
+		tpa_tlv->tpa_client_info.complete_on_both_clients;
+	vf_op_params->dont_verify_thr =
+		tpa_tlv->tpa_client_info.dont_verify_thr;
+	vf_op_params->max_agg_sz =
+		tpa_tlv->tpa_client_info.max_agg_size;
+	vf_op_params->max_sges_pkt =
+		tpa_tlv->tpa_client_info.max_sges_for_packet;
+	vf_op_params->max_tpa_queues =
+		tpa_tlv->tpa_client_info.max_tpa_queues;
+	vf_op_params->sge_buff_sz =
+		tpa_tlv->tpa_client_info.sge_buff_size;
+	vf_op_params->sge_pause_thr_high =
+		tpa_tlv->tpa_client_info.sge_pause_thr_high;
+	vf_op_params->sge_pause_thr_low =
+		tpa_tlv->tpa_client_info.sge_pause_thr_low;
+	vf_op_params->tpa_mode =
+		tpa_tlv->tpa_client_info.tpa_mode;
+	vf_op_params->update_ipv4 =
+		tpa_tlv->tpa_client_info.update_ipv4;
+	vf_op_params->update_ipv6 =
+		tpa_tlv->tpa_client_info.update_ipv6;
+
+	vf->op_rc = bnx2x_vfop_tpa_cmd(bp, vf, &cmd, tpa_tlv);
+
+mbx_resp:
+	if (vf->op_rc)
+		bnx2x_vf_mbx_resp(bp, vf);
+}
+
 /* dispatch request */
 static void bnx2x_vf_mbx_request(struct bnx2x *bp, struct bnx2x_virtf *vf,
 				  struct bnx2x_vf_mbx *mbx)
@@ -1949,6 +2019,9 @@ static void bnx2x_vf_mbx_request(struct bnx2x *bp, struct bnx2x_virtf *vf,
 		case CHANNEL_TLV_UPDATE_RSS:
 			bnx2x_vf_mbx_update_rss(bp, vf, mbx);
 			return;
+		case CHANNEL_TLV_UPDATE_TPA:
+			bnx2x_vf_mbx_update_tpa(bp, vf, mbx);
+			return;
 		}
 
 	} else {
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h
index 208568bc7a71..c922b81170e5 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h
@@ -162,6 +162,7 @@ struct pfvf_acquire_resp_tlv {
 #define PFVF_CAP_RSS		0x00000001
 #define PFVF_CAP_DHC		0x00000002
 #define PFVF_CAP_TPA		0x00000004
+#define PFVF_CAP_TPA_UPDATE	0x00000008
 		char fw_ver[32];
 		u16 db_size;
 		u8  indices_per_sb;
@@ -303,6 +304,25 @@ struct vfpf_set_q_filters_tlv {
 	u32 rx_mask;	/* see mask constants at the top of the file */
 };
 
+struct vfpf_tpa_tlv {
+	struct vfpf_first_tlv	first_tlv;
+
+	struct vf_pf_tpa_client_info {
+		aligned_u64 sge_addr[PFVF_MAX_QUEUES_PER_VF];
+		u8 update_ipv4;
+		u8 update_ipv6;
+		u8 max_tpa_queues;
+		u8 max_sges_for_packet;
+		u8 complete_on_both_clients;
+		u8 dont_verify_thr;
+		u8 tpa_mode;
+		u16 sge_buff_size;
+		u16 max_agg_size;
+		u16 sge_pause_thr_low;
+		u16 sge_pause_thr_high;
+	} tpa_client_info;
+};
+
 /* close VF (disable VF) */
 struct vfpf_close_tlv {
 	struct vfpf_first_tlv   first_tlv;
@@ -331,6 +351,7 @@ union vfpf_tlvs {
 	struct vfpf_set_q_filters_tlv	set_q_filters;
 	struct vfpf_release_tlv		release;
 	struct vfpf_rss_tlv		update_rss;
+	struct vfpf_tpa_tlv		update_tpa;
 	struct channel_list_end_tlv	list_end;
 	struct tlv_buffer_size		tlv_buf_size;
 };
@@ -405,6 +426,7 @@ enum channel_tlvs {
 	CHANNEL_TLV_PF_SET_VLAN,
 	CHANNEL_TLV_UPDATE_RSS,
 	CHANNEL_TLV_PHYS_PORT_ID,
+	CHANNEL_TLV_UPDATE_TPA,
 	CHANNEL_TLV_MAX
 };
 
-- 
cgit v1.2.2


From 3a3534ecf2584d6aa558cb8e71baab929851afcc Mon Sep 17 00:00:00 2001
From: Yuval Mintz <yuvalmin@broadcom.com>
Date: Wed, 12 Feb 2014 18:19:54 +0200
Subject: bnx2x: Revise IOV vlan/mac validation

There are several places in IOV related flows where PF needs to determine
whether a VF slowpath elements have already been configured (i.e., this
affect its ability to configure/remove classifications for the VF).

This patch changes the conditions for the validation and performs a cleaner
validation (e.g., by replacing several validations with a single one).

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c    |  10 --
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h    |   2 -
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c | 127 +++++++++++-----------
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h |   1 +
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c  |   1 +
 5 files changed, 67 insertions(+), 74 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
index 270ba195a56b..31297266b743 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
@@ -4158,16 +4158,6 @@ void bnx2x_init_rss_config_obj(struct bnx2x *bp,
 	rss_obj->config_rss = bnx2x_setup_rss;
 }
 
-int validate_vlan_mac(struct bnx2x *bp,
-		      struct bnx2x_vlan_mac_obj *vlan_mac)
-{
-	if (!vlan_mac->get_n_elements) {
-		BNX2X_ERR("vlan mac object was not intialized\n");
-		return -EINVAL;
-	}
-	return 0;
-}
-
 /********************** Queue state object ***********************************/
 
 /**
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h
index f7af21fc8ecc..80f6c790ed88 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h
@@ -1422,6 +1422,4 @@ int bnx2x_config_rss(struct bnx2x *bp,
 void bnx2x_get_rss_ind_table(struct bnx2x_rss_config_obj *rss_obj,
 			     u8 *ind_table);
 
-int validate_vlan_mac(struct bnx2x *bp,
-		      struct bnx2x_vlan_mac_obj *vlan_mac);
 #endif /* BNX2X_SP_VERBS */
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
index a4a3d7e04df9..bf001602bbb6 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
@@ -102,6 +102,21 @@ static void bnx2x_vf_igu_ack_sb(struct bnx2x *bp, struct bnx2x_virtf *vf,
 	mmiowb();
 	barrier();
 }
+
+static bool bnx2x_validate_vf_sp_objs(struct bnx2x *bp,
+				       struct bnx2x_virtf *vf,
+				       bool print_err)
+{
+	if (!bnx2x_leading_vfq(vf, sp_initialized)) {
+		if (print_err)
+			BNX2X_ERR("Slowpath objects not yet initialized!\n");
+		else
+			DP(BNX2X_MSG_IOV, "Slowpath objects not yet initialized!\n");
+		return false;
+	}
+	return true;
+}
+
 /* VFOP - VF slow-path operation support */
 
 #define BNX2X_VFOP_FILTER_ADD_CNT_MAX		0x10000
@@ -721,7 +736,6 @@ static int bnx2x_vfop_mac_delall_cmd(struct bnx2x *bp,
 				     int qid, bool drv_only)
 {
 	struct bnx2x_vfop *vfop = bnx2x_vfop_add(bp, vf);
-	int rc;
 
 	if (vfop) {
 		struct bnx2x_vfop_args_filters filters = {
@@ -741,9 +755,6 @@ static int bnx2x_vfop_mac_delall_cmd(struct bnx2x *bp,
 		bnx2x_vfop_mac_prep_ramrod(ramrod, &flags);
 
 		/* set object */
-		rc = validate_vlan_mac(bp, &bnx2x_vfq(vf, qid, mac_obj));
-		if (rc)
-			return rc;
 		ramrod->vlan_mac_obj = &bnx2x_vfq(vf, qid, mac_obj);
 
 		/* set extra args */
@@ -763,9 +774,12 @@ int bnx2x_vfop_mac_list_cmd(struct bnx2x *bp,
 			    struct bnx2x_vfop_filters *macs,
 			    int qid, bool drv_only)
 {
-	struct bnx2x_vfop *vfop = bnx2x_vfop_add(bp, vf);
-	int rc;
+	struct bnx2x_vfop *vfop;
 
+	if (!bnx2x_validate_vf_sp_objs(bp, vf, true))
+			return -EINVAL;
+
+	vfop  = bnx2x_vfop_add(bp, vf);
 	if (vfop) {
 		struct bnx2x_vfop_args_filters filters = {
 			.multi_filter = macs,
@@ -787,9 +801,6 @@ int bnx2x_vfop_mac_list_cmd(struct bnx2x *bp,
 		bnx2x_vfop_mac_prep_ramrod(ramrod, &flags);
 
 		/* set object */
-		rc = validate_vlan_mac(bp, &bnx2x_vfq(vf, qid, mac_obj));
-		if (rc)
-			return rc;
 		ramrod->vlan_mac_obj = &bnx2x_vfq(vf, qid, mac_obj);
 
 		/* set extra args */
@@ -809,9 +820,12 @@ static int bnx2x_vfop_vlan_set_cmd(struct bnx2x *bp,
 				   struct bnx2x_vfop_cmd *cmd,
 				   int qid, u16 vid, bool add)
 {
-	struct bnx2x_vfop *vfop = bnx2x_vfop_add(bp, vf);
-	int rc;
+	struct bnx2x_vfop *vfop;
+
+	if (!bnx2x_validate_vf_sp_objs(bp, vf, true))
+		return -EINVAL;
 
+	vfop  = bnx2x_vfop_add(bp, vf);
 	if (vfop) {
 		struct bnx2x_vfop_args_filters filters = {
 			.multi_filter = NULL, /* single command */
@@ -831,9 +845,6 @@ static int bnx2x_vfop_vlan_set_cmd(struct bnx2x *bp,
 		ramrod->user_req.u.vlan.vlan = vid;
 
 		/* set object */
-		rc = validate_vlan_mac(bp, &bnx2x_vfq(vf, qid, vlan_obj));
-		if (rc)
-			return rc;
 		ramrod->vlan_mac_obj = &bnx2x_vfq(vf, qid, vlan_obj);
 
 		/* set extra args */
@@ -853,7 +864,6 @@ static int bnx2x_vfop_vlan_delall_cmd(struct bnx2x *bp,
 			       int qid, bool drv_only)
 {
 	struct bnx2x_vfop *vfop = bnx2x_vfop_add(bp, vf);
-	int rc;
 
 	if (vfop) {
 		struct bnx2x_vfop_args_filters filters = {
@@ -873,9 +883,6 @@ static int bnx2x_vfop_vlan_delall_cmd(struct bnx2x *bp,
 		bnx2x_vfop_vlan_mac_prep_ramrod(ramrod, &flags);
 
 		/* set object */
-		rc = validate_vlan_mac(bp, &bnx2x_vfq(vf, qid, vlan_obj));
-		if (rc)
-			return rc;
 		ramrod->vlan_mac_obj = &bnx2x_vfq(vf, qid, vlan_obj);
 
 		/* set extra args */
@@ -895,9 +902,12 @@ int bnx2x_vfop_vlan_list_cmd(struct bnx2x *bp,
 			     struct bnx2x_vfop_filters *vlans,
 			     int qid, bool drv_only)
 {
-	struct bnx2x_vfop *vfop = bnx2x_vfop_add(bp, vf);
-	int rc;
+	struct bnx2x_vfop *vfop;
+
+	if (!bnx2x_validate_vf_sp_objs(bp, vf, true))
+		return -EINVAL;
 
+	vfop = bnx2x_vfop_add(bp, vf);
 	if (vfop) {
 		struct bnx2x_vfop_args_filters filters = {
 			.multi_filter = vlans,
@@ -916,9 +926,6 @@ int bnx2x_vfop_vlan_list_cmd(struct bnx2x *bp,
 		bnx2x_vfop_vlan_mac_prep_ramrod(ramrod, &flags);
 
 		/* set object */
-		rc = validate_vlan_mac(bp, &bnx2x_vfq(vf, qid, vlan_obj));
-		if (rc)
-			return rc;
 		ramrod->vlan_mac_obj = &bnx2x_vfq(vf, qid, vlan_obj);
 
 		/* set extra args */
@@ -1030,34 +1037,20 @@ static void bnx2x_vfop_qflr(struct bnx2x *bp, struct bnx2x_virtf *vf)
 		/* vlan-clear-all: driver-only, don't consume credit */
 		vfop->state = BNX2X_VFOP_QFLR_CLR_MAC;
 
-		if (!validate_vlan_mac(bp, &bnx2x_vfq(vf, qid, vlan_obj))) {
-			/* the vlan_mac vfop will re-schedule us */
-			vfop->rc = bnx2x_vfop_vlan_delall_cmd(bp, vf, &cmd,
-							      qid, true);
-			if (vfop->rc)
-				goto op_err;
-			return;
-
-		} else {
-			/* need to reschedule ourselves */
-			bnx2x_vfop_finalize(vf, vfop->rc, VFOP_CONT);
-		}
+		/* the vlan_mac vfop will re-schedule us */
+		vfop->rc = bnx2x_vfop_vlan_delall_cmd(bp, vf, &cmd, qid, true);
+		if (vfop->rc)
+			goto op_err;
+		return;
 
 	case BNX2X_VFOP_QFLR_CLR_MAC:
 		/* mac-clear-all: driver only consume credit */
 		vfop->state = BNX2X_VFOP_QFLR_TERMINATE;
-		if (!validate_vlan_mac(bp, &bnx2x_vfq(vf, qid, mac_obj))) {
-			/* the vlan_mac vfop will re-schedule us */
-			vfop->rc = bnx2x_vfop_mac_delall_cmd(bp, vf, &cmd,
-							     qid, true);
-			if (vfop->rc)
-				goto op_err;
-			return;
-
-		} else {
-			/* need to reschedule ourselves */
-			bnx2x_vfop_finalize(vf, vfop->rc, VFOP_CONT);
-		}
+		/* the vlan_mac vfop will re-schedule us */
+		vfop->rc = bnx2x_vfop_mac_delall_cmd(bp, vf, &cmd, qid, true);
+		if (vfop->rc)
+			goto op_err;
+		return;
 
 	case BNX2X_VFOP_QFLR_TERMINATE:
 		qstate = &vfop->op_p->qctor.qstate;
@@ -1100,8 +1093,13 @@ static int bnx2x_vfop_qflr_cmd(struct bnx2x *bp,
 
 	if (vfop) {
 		vfop->args.qx.qid = qid;
-		bnx2x_vfop_opset(BNX2X_VFOP_QFLR_CLR_VLAN,
-				 bnx2x_vfop_qflr, cmd->done);
+		if ((qid == LEADING_IDX) &&
+		    bnx2x_validate_vf_sp_objs(bp, vf, false))
+			bnx2x_vfop_opset(BNX2X_VFOP_QFLR_CLR_VLAN,
+					 bnx2x_vfop_qflr, cmd->done);
+		else
+			bnx2x_vfop_opset(BNX2X_VFOP_QFLR_TERMINATE,
+					 bnx2x_vfop_qflr, cmd->done);
 		return bnx2x_vfop_transition(bp, vf, bnx2x_vfop_qflr,
 					     cmd->block);
 	}
@@ -1315,7 +1313,10 @@ static void bnx2x_vfop_qdown(struct bnx2x *bp, struct bnx2x_virtf *vf)
 	switch (state) {
 	case BNX2X_VFOP_QTEARDOWN_RXMODE:
 		/* Drop all */
-		vfop->state = BNX2X_VFOP_QTEARDOWN_CLR_VLAN;
+		if (bnx2x_validate_vf_sp_objs(bp, vf, true))
+			vfop->state =  BNX2X_VFOP_QTEARDOWN_CLR_VLAN;
+		else
+			vfop->state = BNX2X_VFOP_QTEARDOWN_QDTOR;
 		vfop->rc = bnx2x_vfop_rxmode_cmd(bp, vf, &cmd, qid, 0);
 		if (vfop->rc)
 			goto op_err;
@@ -2171,6 +2172,9 @@ static void bnx2x_vfq_init(struct bnx2x *bp, struct bnx2x_virtf *vf,
 			     bnx2x_vf_sp_map(bp, vf, q_data),
 			     q_type);
 
+	/* sp indication is set only when vlan/mac/etc. are initialized */
+	q->sp_initialized = false;
+
 	DP(BNX2X_MSG_IOV,
 	   "initialized vf %d's queue object. func id set to %d. cid set to 0x%x\n",
 	   vf->abs_vfid, q->sp_obj.func_id, q->cid);
@@ -3478,13 +3482,13 @@ int bnx2x_get_vf_config(struct net_device *dev, int vfidx,
 	ivi->spoofchk = 1; /*always enabled */
 	if (vf->state == VF_ENABLED) {
 		/* mac and vlan are in vlan_mac objects */
-		if (validate_vlan_mac(bp, &bnx2x_leading_vfq(vf, mac_obj)))
+		if (bnx2x_validate_vf_sp_objs(bp, vf, false)) {
 			mac_obj->get_n_elements(bp, mac_obj, 1, (u8 *)&ivi->mac,
 						0, ETH_ALEN);
-		if (validate_vlan_mac(bp, &bnx2x_leading_vfq(vf, vlan_obj)))
 			vlan_obj->get_n_elements(bp, vlan_obj, 1,
 						 (u8 *)&ivi->vlan, 0,
 						 VLAN_HLEN);
+		}
 	} else {
 		/* mac */
 		if (bulletin->valid_bitmap & (1 << MAC_ADDR_VALID))
@@ -3558,17 +3562,17 @@ int bnx2x_set_vf_mac(struct net_device *dev, int vfidx, u8 *mac)
 	    q_logical_state == BNX2X_Q_LOGICAL_STATE_ACTIVE) {
 		/* configure the mac in device on this vf's queue */
 		unsigned long ramrod_flags = 0;
-		struct bnx2x_vlan_mac_obj *mac_obj =
-			&bnx2x_leading_vfq(vf, mac_obj);
+		struct bnx2x_vlan_mac_obj *mac_obj;
 
-		rc = validate_vlan_mac(bp, &bnx2x_leading_vfq(vf, mac_obj));
-		if (rc)
-			return rc;
+		/* User should be able to see failure reason in system logs */
+		if (!bnx2x_validate_vf_sp_objs(bp, vf, true))
+			return -EINVAL;
 
 		/* must lock vfpf channel to protect against vf flows */
 		bnx2x_lock_vf_pf_channel(bp, vf, CHANNEL_TLV_PF_SET_MAC);
 
 		/* remove existing eth macs */
+		mac_obj = &bnx2x_leading_vfq(vf, mac_obj);
 		rc = bnx2x_del_all_macs(bp, mac_obj, BNX2X_ETH_MAC, true);
 		if (rc) {
 			BNX2X_ERR("failed to delete eth macs\n");
@@ -3642,17 +3646,16 @@ int bnx2x_set_vf_vlan(struct net_device *dev, int vfidx, u16 vlan, u8 qos)
 	    BNX2X_Q_LOGICAL_STATE_ACTIVE)
 		return rc;
 
-	/* configure the vlan in device on this vf's queue */
-	vlan_obj = &bnx2x_leading_vfq(vf, vlan_obj);
-	rc = validate_vlan_mac(bp, &bnx2x_leading_vfq(vf, mac_obj));
-	if (rc)
-		return rc;
+	/* User should be able to see error in system logs */
+	if (!bnx2x_validate_vf_sp_objs(bp, vf, true))
+		return -EINVAL;
 
 	/* must lock vfpf channel to protect against vf flows */
 	bnx2x_lock_vf_pf_channel(bp, vf, CHANNEL_TLV_PF_SET_VLAN);
 
 	/* remove existing vlans */
 	__set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
+	vlan_obj = &bnx2x_leading_vfq(vf, vlan_obj);
 	rc = vlan_obj->delete_all(bp, vlan_obj, &vlan_mac_flags,
 				  &ramrod_flags);
 	if (rc) {
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h
index 9b60e80c89fe..b1dc751c6175 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h
@@ -83,6 +83,7 @@ struct bnx2x_vf_queue {
 	u16 index;
 	u16 sb_idx;
 	bool is_leading;
+	bool sp_initialized;
 };
 
 /* struct bnx2x_vfop_qctor_params - prepare queue construction parameters:
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c
index dfaed288becd..1117ed7776b6 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c
@@ -548,6 +548,7 @@ static void bnx2x_leading_vfq_init(struct bnx2x *bp, struct bnx2x_virtf *vf,
 
 	vf->leading_rss = cl_id;
 	q->is_leading = true;
+	q->sp_initialized = true;
 }
 
 /* ask the pf to open a queue for the vf */
-- 
cgit v1.2.2


From 0155a27cda683641d29e04e0fbea44afbd302fff Mon Sep 17 00:00:00 2001
From: Yuval Mintz <yuvalmin@broadcom.com>
Date: Wed, 12 Feb 2014 18:19:55 +0200
Subject: bnx2x: Fix bnx2x_panic_dump for VFs

bnx2x_panic_dump() prints all kind of driver information, including slowpath
information. Since VFs don't initialize slowpath information, a VF reaching
this flow will likely cause a panic in the system as it will access NULL
pointers.

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 97 ++++++++++++++----------
 1 file changed, 57 insertions(+), 40 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 56a7d3f2128a..da4f75e5cf07 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -918,7 +918,7 @@ void bnx2x_panic_dump(struct bnx2x *bp, bool disable_int)
 	u16 start = 0, end = 0;
 	u8 cos;
 #endif
-	if (disable_int)
+	if (IS_PF(bp) && disable_int)
 		bnx2x_int_disable(bp);
 
 	bp->stats_state = STATS_STATE_DISABLED;
@@ -929,33 +929,41 @@ void bnx2x_panic_dump(struct bnx2x *bp, bool disable_int)
 
 	/* Indices */
 	/* Common */
-	BNX2X_ERR("def_idx(0x%x)  def_att_idx(0x%x)  attn_state(0x%x)  spq_prod_idx(0x%x) next_stats_cnt(0x%x)\n",
-		  bp->def_idx, bp->def_att_idx, bp->attn_state,
-		  bp->spq_prod_idx, bp->stats_counter);
-	BNX2X_ERR("DSB: attn bits(0x%x)  ack(0x%x)  id(0x%x)  idx(0x%x)\n",
-		  bp->def_status_blk->atten_status_block.attn_bits,
-		  bp->def_status_blk->atten_status_block.attn_bits_ack,
-		  bp->def_status_blk->atten_status_block.status_block_id,
-		  bp->def_status_blk->atten_status_block.attn_bits_index);
-	BNX2X_ERR("     def (");
-	for (i = 0; i < HC_SP_SB_MAX_INDICES; i++)
-		pr_cont("0x%x%s",
-			bp->def_status_blk->sp_sb.index_values[i],
-			(i == HC_SP_SB_MAX_INDICES - 1) ? ")  " : " ");
-
-	for (i = 0; i < sizeof(struct hc_sp_status_block_data)/sizeof(u32); i++)
-		*((u32 *)&sp_sb_data + i) = REG_RD(bp, BAR_CSTRORM_INTMEM +
-			CSTORM_SP_STATUS_BLOCK_DATA_OFFSET(func) +
-			i*sizeof(u32));
-
-	pr_cont("igu_sb_id(0x%x)  igu_seg_id(0x%x) pf_id(0x%x)  vnic_id(0x%x)  vf_id(0x%x)  vf_valid (0x%x) state(0x%x)\n",
-	       sp_sb_data.igu_sb_id,
-	       sp_sb_data.igu_seg_id,
-	       sp_sb_data.p_func.pf_id,
-	       sp_sb_data.p_func.vnic_id,
-	       sp_sb_data.p_func.vf_id,
-	       sp_sb_data.p_func.vf_valid,
-	       sp_sb_data.state);
+	if (IS_PF(bp)) {
+		struct host_sp_status_block *def_sb = bp->def_status_blk;
+		int data_size, cstorm_offset;
+
+		BNX2X_ERR("def_idx(0x%x)  def_att_idx(0x%x)  attn_state(0x%x)  spq_prod_idx(0x%x) next_stats_cnt(0x%x)\n",
+			  bp->def_idx, bp->def_att_idx, bp->attn_state,
+			  bp->spq_prod_idx, bp->stats_counter);
+		BNX2X_ERR("DSB: attn bits(0x%x)  ack(0x%x)  id(0x%x)  idx(0x%x)\n",
+			  def_sb->atten_status_block.attn_bits,
+			  def_sb->atten_status_block.attn_bits_ack,
+			  def_sb->atten_status_block.status_block_id,
+			  def_sb->atten_status_block.attn_bits_index);
+		BNX2X_ERR("     def (");
+		for (i = 0; i < HC_SP_SB_MAX_INDICES; i++)
+			pr_cont("0x%x%s",
+				def_sb->sp_sb.index_values[i],
+				(i == HC_SP_SB_MAX_INDICES - 1) ? ")  " : " ");
+
+		data_size = sizeof(struct hc_sp_status_block_data) /
+			    sizeof(u32);
+		cstorm_offset = CSTORM_SP_STATUS_BLOCK_DATA_OFFSET(func);
+		for (i = 0; i < data_size; i++)
+			*((u32 *)&sp_sb_data + i) =
+				REG_RD(bp, BAR_CSTRORM_INTMEM + cstorm_offset +
+					   i * sizeof(u32));
+
+		pr_cont("igu_sb_id(0x%x)  igu_seg_id(0x%x) pf_id(0x%x)  vnic_id(0x%x)  vf_id(0x%x)  vf_valid (0x%x) state(0x%x)\n",
+			sp_sb_data.igu_sb_id,
+			sp_sb_data.igu_seg_id,
+			sp_sb_data.p_func.pf_id,
+			sp_sb_data.p_func.vnic_id,
+			sp_sb_data.p_func.vf_id,
+			sp_sb_data.p_func.vf_valid,
+			sp_sb_data.state);
+	}
 
 	for_each_eth_queue(bp, i) {
 		struct bnx2x_fastpath *fp = &bp->fp[i];
@@ -1013,6 +1021,11 @@ void bnx2x_panic_dump(struct bnx2x *bp, bool disable_int)
 			pr_cont("0x%x%s",
 			       fp->sb_index_values[j],
 			       (j == loop - 1) ? ")" : " ");
+
+		/* VF cannot access FW refelection for status block */
+		if (IS_VF(bp))
+			continue;
+
 		/* fw sb data */
 		data_size = CHIP_IS_E1x(bp) ?
 			sizeof(struct hc_status_block_data_e1x) :
@@ -1064,16 +1077,18 @@ void bnx2x_panic_dump(struct bnx2x *bp, bool disable_int)
 	}
 
 #ifdef BNX2X_STOP_ON_ERROR
-
-	/* event queue */
-	BNX2X_ERR("eq cons %x prod %x\n", bp->eq_cons, bp->eq_prod);
-	for (i = 0; i < NUM_EQ_DESC; i++) {
-		u32 *data = (u32 *)&bp->eq_ring[i].message.data;
-
-		BNX2X_ERR("event queue [%d]: header: opcode %d, error %d\n",
-			  i, bp->eq_ring[i].message.opcode,
-			  bp->eq_ring[i].message.error);
-		BNX2X_ERR("data: %x %x %x\n", data[0], data[1], data[2]);
+	if (IS_PF(bp)) {
+		/* event queue */
+		BNX2X_ERR("eq cons %x prod %x\n", bp->eq_cons, bp->eq_prod);
+		for (i = 0; i < NUM_EQ_DESC; i++) {
+			u32 *data = (u32 *)&bp->eq_ring[i].message.data;
+
+			BNX2X_ERR("event queue [%d]: header: opcode %d, error %d\n",
+				  i, bp->eq_ring[i].message.opcode,
+				  bp->eq_ring[i].message.error);
+			BNX2X_ERR("data: %x %x %x\n",
+				  data[0], data[1], data[2]);
+		}
 	}
 
 	/* Rings */
@@ -1140,8 +1155,10 @@ void bnx2x_panic_dump(struct bnx2x *bp, bool disable_int)
 		}
 	}
 #endif
-	bnx2x_fw_dump(bp);
-	bnx2x_mc_assert(bp);
+	if (IS_PF(bp)) {
+		bnx2x_fw_dump(bp);
+		bnx2x_mc_assert(bp);
+	}
 	BNX2X_ERR("end crash dump -----------------\n");
 }
 
-- 
cgit v1.2.2


From 230bb0f33672b5fad1c485ca82789f427fc1b253 Mon Sep 17 00:00:00 2001
From: Yuval Mintz <yuvalmin@broadcom.com>
Date: Wed, 12 Feb 2014 18:19:56 +0200
Subject: bnx2x: (semantic) revise scheduling of sp_rtnl

This removes the various points where the driver use bit operations in order
to schedule the sp_rtnl_task from the code, adding a single utility function
that does it instead.

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x.h       |  2 +-
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c   | 18 +++++++++++----
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h   |  3 +++
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c   |  8 ++-----
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c  | 28 +++++++----------------
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c | 17 ++++----------
 6 files changed, 32 insertions(+), 44 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
index c871d19ab6e1..21fdd1b869db 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -1402,7 +1402,7 @@ struct bnx2x_fw_stats_data {
 };
 
 /* Public slow path states */
-enum {
+enum sp_rtnl_flag {
 	BNX2X_SP_RTNL_SETUP_TC,
 	BNX2X_SP_RTNL_TX_TIMEOUT,
 	BNX2X_SP_RTNL_FAN_FAILURE,
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
index 9d7419e0390b..9ded3dbb7678 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -4773,12 +4773,8 @@ void bnx2x_tx_timeout(struct net_device *dev)
 		bnx2x_panic();
 #endif
 
-	smp_mb__before_clear_bit();
-	set_bit(BNX2X_SP_RTNL_TX_TIMEOUT, &bp->sp_rtnl_state);
-	smp_mb__after_clear_bit();
-
 	/* This allows the netif to be shutdown gracefully before resetting */
-	schedule_delayed_work(&bp->sp_rtnl_task, 0);
+	bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_TX_TIMEOUT, 0);
 }
 
 int bnx2x_suspend(struct pci_dev *pdev, pm_message_t state)
@@ -4906,3 +4902,15 @@ void bnx2x_update_coalesce_sb_index(struct bnx2x *bp, u8 fw_sb_id,
 	disable = disable ? 1 : (usec ? 0 : 1);
 	storm_memset_hc_disable(bp, port, fw_sb_id, sb_index, disable);
 }
+
+void bnx2x_schedule_sp_rtnl(struct bnx2x *bp, enum sp_rtnl_flag flag,
+			    u32 verbose)
+{
+	smp_mb__before_clear_bit();
+	set_bit(flag, &bp->sp_rtnl_state);
+	smp_mb__after_clear_bit();
+	DP((BNX2X_MSG_SP | verbose), "Scheduling sp_rtnl task [Flag: %d]\n",
+	   flag);
+	schedule_delayed_work(&bp->sp_rtnl_task, 0);
+}
+EXPORT_SYMBOL(bnx2x_schedule_sp_rtnl);
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
index bfc58d488bb5..5135cc7f7b6f 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
@@ -1324,4 +1324,7 @@ void bnx2x_fill_fw_str(struct bnx2x *bp, char *buf, size_t buf_len);
 int bnx2x_drain_tx_queues(struct bnx2x *bp);
 void bnx2x_squeeze_objects(struct bnx2x *bp);
 
+void bnx2x_schedule_sp_rtnl(struct bnx2x*, enum sp_rtnl_flag,
+			    u32 verbose);
+
 #endif /* BNX2X_CMN_H */
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c
index fdace204b054..97ea5421dd96 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c
@@ -710,8 +710,7 @@ static inline void bnx2x_dcbx_update_tc_mapping(struct bnx2x *bp)
 	 * as we are handling an attention on a work queue which must be
 	 * flushed at some rtnl-locked contexts (e.g. if down)
 	 */
-	if (!test_and_set_bit(BNX2X_SP_RTNL_SETUP_TC, &bp->sp_rtnl_state))
-		schedule_delayed_work(&bp->sp_rtnl_task, 0);
+	bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_SETUP_TC, 0);
 }
 
 void bnx2x_dcbx_set_params(struct bnx2x *bp, u32 state)
@@ -764,10 +763,7 @@ void bnx2x_dcbx_set_params(struct bnx2x *bp, u32 state)
 			if (IS_MF(bp))
 				bnx2x_link_sync_notify(bp);
 
-			set_bit(BNX2X_SP_RTNL_TX_STOP, &bp->sp_rtnl_state);
-
-			schedule_delayed_work(&bp->sp_rtnl_task, 0);
-
+			bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_TX_STOP, 0);
 			return;
 		}
 	case BNX2X_DCBX_STATE_TX_PAUSED:
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index da4f75e5cf07..84439152e499 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -3908,10 +3908,7 @@ static void bnx2x_fan_failure(struct bnx2x *bp)
 	 * This is due to some boards consuming sufficient power when driver is
 	 * up to overheat if fan fails.
 	 */
-	smp_mb__before_clear_bit();
-	set_bit(BNX2X_SP_RTNL_FAN_FAILURE, &bp->sp_rtnl_state);
-	smp_mb__after_clear_bit();
-	schedule_delayed_work(&bp->sp_rtnl_task, 0);
+	bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_FAN_FAILURE, 0);
 }
 
 static void bnx2x_attn_int_deasserted0(struct bnx2x *bp, u32 attn)
@@ -5303,6 +5300,8 @@ static void bnx2x_eq_int(struct bnx2x *bp)
 					break;
 
 			} else {
+				int cmd = BNX2X_SP_RTNL_AFEX_F_UPDATE;
+
 				DP(BNX2X_MSG_SP | BNX2X_MSG_MCP,
 				   "AFEX: ramrod completed FUNCTION_UPDATE\n");
 				f_obj->complete_cmd(bp, f_obj,
@@ -5312,12 +5311,7 @@ static void bnx2x_eq_int(struct bnx2x *bp)
 				 * sp_rtnl task as all Queue SP operations
 				 * should run under rtnl_lock.
 				 */
-				smp_mb__before_clear_bit();
-				set_bit(BNX2X_SP_RTNL_AFEX_F_UPDATE,
-					&bp->sp_rtnl_state);
-				smp_mb__after_clear_bit();
-
-				schedule_delayed_work(&bp->sp_rtnl_task, 0);
+				bnx2x_schedule_sp_rtnl(bp, cmd, 0);
 			}
 
 			goto next_spqe;
@@ -12082,11 +12076,8 @@ static void bnx2x_set_rx_mode(struct net_device *dev)
 		return;
 	} else {
 		/* Schedule an SP task to handle rest of change */
-		DP(NETIF_MSG_IFUP, "Scheduling an Rx mode change\n");
-		smp_mb__before_clear_bit();
-		set_bit(BNX2X_SP_RTNL_RX_MODE, &bp->sp_rtnl_state);
-		smp_mb__after_clear_bit();
-		schedule_delayed_work(&bp->sp_rtnl_task, 0);
+		bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_RX_MODE,
+				       NETIF_MSG_IFUP);
 	}
 }
 
@@ -12119,11 +12110,8 @@ void bnx2x_set_rx_mode_inner(struct bnx2x *bp)
 			/* configuring mcast to a vf involves sleeping (when we
 			 * wait for the pf's response).
 			 */
-			smp_mb__before_clear_bit();
-			set_bit(BNX2X_SP_RTNL_VFPF_MCAST,
-				&bp->sp_rtnl_state);
-			smp_mb__after_clear_bit();
-			schedule_delayed_work(&bp->sp_rtnl_task, 0);
+			bnx2x_schedule_sp_rtnl(bp,
+					       BNX2X_SP_RTNL_VFPF_MCAST, 0);
 		}
 	}
 
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
index bf001602bbb6..98b53671a652 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
@@ -983,11 +983,8 @@ op_err:
 op_done:
 	case BNX2X_VFOP_QSETUP_DONE:
 		vf->cfg_flags |= VF_CFG_VLAN;
-		smp_mb__before_clear_bit();
-		set_bit(BNX2X_SP_RTNL_HYPERVISOR_VLAN,
-			&bp->sp_rtnl_state);
-		smp_mb__after_clear_bit();
-		schedule_delayed_work(&bp->sp_rtnl_task, 0);
+		bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_HYPERVISOR_VLAN,
+				       BNX2X_MSG_IOV);
 		bnx2x_vfop_end(bp, vf, vfop);
 		return;
 	default:
@@ -3812,13 +3809,9 @@ void bnx2x_timer_sriov(struct bnx2x *bp)
 	bnx2x_sample_bulletin(bp);
 
 	/* if channel is down we need to self destruct */
-	if (bp->old_bulletin.valid_bitmap & 1 << CHANNEL_DOWN) {
-		smp_mb__before_clear_bit();
-		set_bit(BNX2X_SP_RTNL_VFPF_CHANNEL_DOWN,
-			&bp->sp_rtnl_state);
-		smp_mb__after_clear_bit();
-		schedule_delayed_work(&bp->sp_rtnl_task, 0);
-	}
+	if (bp->old_bulletin.valid_bitmap & 1 << CHANNEL_DOWN)
+		bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_VFPF_CHANNEL_DOWN,
+				       BNX2X_MSG_IOV);
 }
 
 void __iomem *bnx2x_vf_doorbells(struct bnx2x *bp)
-- 
cgit v1.2.2


From 3156b8eb9d85ee475de20352c07cb386a53255c2 Mon Sep 17 00:00:00 2001
From: Dmitry Kravkov <dmitry@broadcom.com>
Date: Wed, 12 Feb 2014 18:19:57 +0200
Subject: bnx2x: utilize FW 7.8.19

    This new firmware fixes following bugs:
     1. HW attention appears and traffic stops when iSCSI firmware tries to
        retransmit iSCSI login command when the iSCSI login is carrying data
        not aligned to 4-bytes.
     2. FCoE traffic fails to run when running in switch-independent multi-function
        mode and there's more than one interface supporting FCoE on a given port.
     3. While two ports are running FCoE with at least one of them has a function
        number (>1) on the same engine in a 4-port device a zeroed CQE is given,
        causing FCoE traffic to stop.

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x.h     | 4 ++--
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
index 21fdd1b869db..722160940ab9 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -26,8 +26,8 @@
  * (you will need to reboot afterwards) */
 /* #define BNX2X_STOP_ON_ERROR */
 
-#define DRV_MODULE_VERSION      "1.78.17-0"
-#define DRV_MODULE_RELDATE      "2013/04/11"
+#define DRV_MODULE_VERSION      "1.78.19-0"
+#define DRV_MODULE_RELDATE      "2014/02/10"
 #define BNX2X_BC_VER            0x040200
 
 #if defined(CONFIG_DCB)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h
index cf1df8b62e2c..46e2f18df2cb 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h
@@ -2848,7 +2848,7 @@ struct afex_stats {
 
 #define BCM_5710_FW_MAJOR_VERSION			7
 #define BCM_5710_FW_MINOR_VERSION			8
-#define BCM_5710_FW_REVISION_VERSION		17
+#define BCM_5710_FW_REVISION_VERSION		19
 #define BCM_5710_FW_ENGINEERING_VERSION		0
 #define BCM_5710_FW_COMPILE_FLAGS			1
 
-- 
cgit v1.2.2


From 5045388ceec19979e816f229f07547ec7067ccd5 Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Wed, 5 Feb 2014 19:12:24 +0200
Subject: iwlwifi: pcie: clean iwl_pcie_[rt]xq_inc_wr_ptr a bit

The various code blocks in iwl_pcie_[rt]xq_inc_wr_ptr
finally do the same things, so just merge them
all and make the functions cleaner.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/pcie/rx.c | 47 ++++++++++---------------
 drivers/net/wireless/iwlwifi/pcie/tx.c | 63 ++++++++++++++++------------------
 2 files changed, 47 insertions(+), 63 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/pcie/rx.c b/drivers/net/wireless/iwlwifi/pcie/rx.c
index 41f684deff97..cf49f6ce0ff8 100644
--- a/drivers/net/wireless/iwlwifi/pcie/rx.c
+++ b/drivers/net/wireless/iwlwifi/pcie/rx.c
@@ -155,37 +155,26 @@ static void iwl_pcie_rxq_inc_wr_ptr(struct iwl_trans *trans,
 	if (rxq->need_update == 0)
 		goto exit_unlock;
 
-	if (trans->cfg->base_params->shadow_reg_enable) {
-		/* shadow register enabled */
-		/* Device expects a multiple of 8 */
-		rxq->write_actual = (rxq->write & ~0x7);
-		iwl_write32(trans, FH_RSCSR_CHNL0_WPTR, rxq->write_actual);
-	} else {
-		/* If power-saving is in use, make sure device is awake */
-		if (test_bit(STATUS_TPOWER_PMI, &trans->status)) {
-			reg = iwl_read32(trans, CSR_UCODE_DRV_GP1);
-
-			if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) {
-				IWL_DEBUG_INFO(trans,
-					"Rx queue requesting wakeup,"
-					" GP1 = 0x%x\n", reg);
-				iwl_set_bit(trans, CSR_GP_CNTRL,
-					CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
-				goto exit_unlock;
-			}
-
-			rxq->write_actual = (rxq->write & ~0x7);
-			iwl_write_direct32(trans, FH_RSCSR_CHNL0_WPTR,
-					   rxq->write_actual);
-
-		/* Else device is assumed to be awake */
-		} else {
-			/* Device expects a multiple of 8 */
-			rxq->write_actual = (rxq->write & ~0x7);
-			iwl_write_direct32(trans, FH_RSCSR_CHNL0_WPTR,
-					   rxq->write_actual);
+	/*
+	 * explicitly wake up the NIC if:
+	 * 1. shadow registers aren't enabled
+	 * 2. there is a chance that the NIC is asleep
+	 */
+	if (!trans->cfg->base_params->shadow_reg_enable &&
+	    test_bit(STATUS_TPOWER_PMI, &trans->status)) {
+		reg = iwl_read32(trans, CSR_UCODE_DRV_GP1);
+
+		if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) {
+			IWL_DEBUG_INFO(trans, "Rx queue requesting wakeup, GP1 = 0x%x\n",
+				       reg);
+			iwl_set_bit(trans, CSR_GP_CNTRL,
+				    CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
+			goto exit_unlock;
 		}
 	}
+
+	rxq->write_actual = round_down(rxq->write, 8);
+	iwl_write32(trans, FH_RSCSR_CHNL0_WPTR, rxq->write_actual);
 	rxq->need_update = 0;
 
  exit_unlock:
diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c
index 254126447c68..e476d9eda61a 100644
--- a/drivers/net/wireless/iwlwifi/pcie/tx.c
+++ b/drivers/net/wireless/iwlwifi/pcie/tx.c
@@ -296,43 +296,38 @@ void iwl_pcie_txq_inc_wr_ptr(struct iwl_trans *trans, struct iwl_txq *txq)
 	if (txq->need_update == 0)
 		return;
 
-	if (trans->cfg->base_params->shadow_reg_enable ||
-	    txq_id == trans_pcie->cmd_queue) {
-		/* shadow register enabled */
-		iwl_write32(trans, HBUS_TARG_WRPTR,
-			    txq->q.write_ptr | (txq_id << 8));
-	} else {
-		/* if we're trying to save power */
-		if (test_bit(STATUS_TPOWER_PMI, &trans->status)) {
-			/* wake up nic if it's powered down ...
-			 * uCode will wake up, and interrupt us again, so next
-			 * time we'll skip this part. */
-			reg = iwl_read32(trans, CSR_UCODE_DRV_GP1);
-
-			if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) {
-				IWL_DEBUG_INFO(trans,
-					"Tx queue %d requesting wakeup,"
-					" GP1 = 0x%x\n", txq_id, reg);
-				iwl_set_bit(trans, CSR_GP_CNTRL,
-					CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
-				return;
-			}
-
-			IWL_DEBUG_TX(trans, "Q:%d WR: 0x%x\n", txq_id,
-				     txq->q.write_ptr);
-
-			iwl_write_direct32(trans, HBUS_TARG_WRPTR,
-				     txq->q.write_ptr | (txq_id << 8));
-
+	/*
+	 * explicitly wake up the NIC if:
+	 * 1. shadow registers aren't enabled
+	 * 2. NIC is woken up for CMD regardless of shadow outside this function
+	 * 3. there is a chance that the NIC is asleep
+	 */
+	if (!trans->cfg->base_params->shadow_reg_enable &&
+	    txq_id != trans_pcie->cmd_queue &&
+	    test_bit(STATUS_TPOWER_PMI, &trans->status)) {
 		/*
-		 * else not in power-save mode,
-		 * uCode will never sleep when we're
-		 * trying to tx (during RFKILL, we're not trying to tx).
+		 * wake up nic if it's powered down ...
+		 * uCode will wake up, and interrupt us again, so next
+		 * time we'll skip this part.
 		 */
-		} else
-			iwl_write32(trans, HBUS_TARG_WRPTR,
-				    txq->q.write_ptr | (txq_id << 8));
+		reg = iwl_read32(trans, CSR_UCODE_DRV_GP1);
+
+		if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) {
+			IWL_DEBUG_INFO(trans, "Tx queue %d requesting wakeup, GP1 = 0x%x\n",
+				       txq_id, reg);
+			iwl_set_bit(trans, CSR_GP_CNTRL,
+				    CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
+			return;
+		}
 	}
+
+	/*
+	 * if not in power-save mode, uCode will never sleep when we're
+	 * trying to tx (during RFKILL, we're not trying to tx).
+	 */
+	IWL_DEBUG_TX(trans, "Q:%d WR: 0x%x\n", txq_id, txq->q.write_ptr);
+	iwl_write32(trans, HBUS_TARG_WRPTR, txq->q.write_ptr | (txq_id << 8));
+
 	txq->need_update = 0;
 }
 
-- 
cgit v1.2.2


From e5209263df94a41090199c95b21939139760fd85 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Mon, 20 Jan 2014 23:38:59 +0100
Subject: iwlwifi: make various things const

There are a number of things in the .data section that should
really be in .rodata, for example all ops structs and strings.
Mark everything const that can be, leaving the .data section
pretty much empty.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/dvm/agn.h       | 4 ++--
 drivers/net/wireless/iwlwifi/dvm/devices.c   | 2 +-
 drivers/net/wireless/iwlwifi/dvm/mac80211.c  | 2 +-
 drivers/net/wireless/iwlwifi/dvm/rx.c        | 2 +-
 drivers/net/wireless/iwlwifi/iwl-trans.h     | 2 +-
 drivers/net/wireless/iwlwifi/mvm/mac80211.c  | 2 +-
 drivers/net/wireless/iwlwifi/mvm/mvm.h       | 3 +--
 drivers/net/wireless/iwlwifi/mvm/ops.c       | 2 +-
 drivers/net/wireless/iwlwifi/mvm/utils.c     | 4 ++--
 drivers/net/wireless/iwlwifi/pcie/internal.h | 2 +-
 10 files changed, 12 insertions(+), 13 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/dvm/agn.h b/drivers/net/wireless/iwlwifi/dvm/agn.h
index 562772d85102..c160dad03037 100644
--- a/drivers/net/wireless/iwlwifi/dvm/agn.h
+++ b/drivers/net/wireless/iwlwifi/dvm/agn.h
@@ -109,7 +109,7 @@ extern const struct iwl_dvm_cfg iwl_dvm_6030_cfg;
 
 struct iwl_ucode_capabilities;
 
-extern struct ieee80211_ops iwlagn_hw_ops;
+extern const struct ieee80211_ops iwlagn_hw_ops;
 
 static inline void iwl_set_calib_hdr(struct iwl_calib_hdr *hdr, u8 cmd)
 {
@@ -480,7 +480,7 @@ do {									\
 } while (0)
 #endif				/* CONFIG_IWLWIFI_DEBUG */
 
-extern const char *iwl_dvm_cmd_strings[REPLY_MAX];
+extern const char *const iwl_dvm_cmd_strings[REPLY_MAX];
 
 static inline const char *iwl_dvm_get_cmd_string(u8 cmd)
 {
diff --git a/drivers/net/wireless/iwlwifi/dvm/devices.c b/drivers/net/wireless/iwlwifi/dvm/devices.c
index 7b140e487deb..758c54eeb206 100644
--- a/drivers/net/wireless/iwlwifi/dvm/devices.c
+++ b/drivers/net/wireless/iwlwifi/dvm/devices.c
@@ -317,7 +317,7 @@ static const struct iwl_sensitivity_ranges iwl5000_sensitivity = {
 	.nrg_th_cca = 62,
 };
 
-static struct iwl_sensitivity_ranges iwl5150_sensitivity = {
+static const struct iwl_sensitivity_ranges iwl5150_sensitivity = {
 	.min_nrg_cck = 95,
 	.auto_corr_min_ofdm = 90,
 	.auto_corr_min_ofdm_mrc = 170,
diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c
index c24d1d3d55f6..f57608943ca6 100644
--- a/drivers/net/wireless/iwlwifi/dvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c
@@ -1564,7 +1564,7 @@ static void iwlagn_mac_sta_notify(struct ieee80211_hw *hw,
 	IWL_DEBUG_MAC80211(priv, "leave\n");
 }
 
-struct ieee80211_ops iwlagn_hw_ops = {
+const struct ieee80211_ops iwlagn_hw_ops = {
 	.tx = iwlagn_mac_tx,
 	.start = iwlagn_mac_start,
 	.stop = iwlagn_mac_stop,
diff --git a/drivers/net/wireless/iwlwifi/dvm/rx.c b/drivers/net/wireless/iwlwifi/dvm/rx.c
index 7a1bc1c547e1..cd8377346aff 100644
--- a/drivers/net/wireless/iwlwifi/dvm/rx.c
+++ b/drivers/net/wireless/iwlwifi/dvm/rx.c
@@ -39,7 +39,7 @@
 
 #define IWL_CMD_ENTRY(x) [x] = #x
 
-const char *iwl_dvm_cmd_strings[REPLY_MAX] = {
+const char *const iwl_dvm_cmd_strings[REPLY_MAX] = {
 	IWL_CMD_ENTRY(REPLY_ALIVE),
 	IWL_CMD_ENTRY(REPLY_ERROR),
 	IWL_CMD_ENTRY(REPLY_ECHO),
diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h
index 7b19274b550f..8cdb0dd618a6 100644
--- a/drivers/net/wireless/iwlwifi/iwl-trans.h
+++ b/drivers/net/wireless/iwlwifi/iwl-trans.h
@@ -393,7 +393,7 @@ struct iwl_trans_config {
 	bool rx_buf_size_8k;
 	bool bc_table_dword;
 	unsigned int queue_watchdog_timeout;
-	const char **command_names;
+	const char *const *command_names;
 };
 
 struct iwl_trans;
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index ba4dcabf7c4a..42f70469e73b 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -2233,7 +2233,7 @@ static int iwl_mvm_mac_testmode_cmd(struct ieee80211_hw *hw,
 }
 #endif
 
-struct ieee80211_ops iwl_mvm_hw_ops = {
+const struct ieee80211_ops iwl_mvm_hw_ops = {
 	.tx = iwl_mvm_mac_tx,
 	.ampdu_action = iwl_mvm_mac_ampdu_action,
 	.start = iwl_mvm_mac_start,
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index ebea5f2e2741..bde8190bb6c4 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -91,8 +91,7 @@ enum iwl_mvm_tx_fifo {
 	IWL_MVM_TX_FIFO_MCAST = 5,
 };
 
-extern struct ieee80211_ops iwl_mvm_hw_ops;
-extern const struct iwl_mvm_power_ops pm_mac_ops;
+extern const struct ieee80211_ops iwl_mvm_hw_ops;
 
 /**
  * struct iwl_mvm_mod_params - module parameters for iwlmvm
diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c
index a46f0b8b0870..ae347fb16a5d 100644
--- a/drivers/net/wireless/iwlwifi/mvm/ops.c
+++ b/drivers/net/wireless/iwlwifi/mvm/ops.c
@@ -245,7 +245,7 @@ static const struct iwl_rx_handlers iwl_mvm_rx_handlers[] = {
 #undef RX_HANDLER
 #define CMD(x) [x] = #x
 
-static const char *iwl_mvm_cmd_strings[REPLY_MAX] = {
+static const char *const iwl_mvm_cmd_strings[REPLY_MAX] = {
 	CMD(MVM_ALIVE),
 	CMD(REPLY_ERROR),
 	CMD(INIT_COMPLETE_NOTIF),
diff --git a/drivers/net/wireless/iwlwifi/mvm/utils.c b/drivers/net/wireless/iwlwifi/mvm/utils.c
index f4598cb2dd2e..2021b57189bc 100644
--- a/drivers/net/wireless/iwlwifi/mvm/utils.c
+++ b/drivers/net/wireless/iwlwifi/mvm/utils.c
@@ -289,8 +289,8 @@ u8 iwl_mvm_next_antenna(struct iwl_mvm *mvm, u8 valid, u8 last_idx)
 	return last_idx;
 }
 
-static struct {
-	char *name;
+static const struct {
+	const char *name;
 	u8 num;
 } advanced_lookup[] = {
 	{ "NMI_INTERRUPT_WDG", 0x34 },
diff --git a/drivers/net/wireless/iwlwifi/pcie/internal.h b/drivers/net/wireless/iwlwifi/pcie/internal.h
index e851f26fd44c..3120bc5bb12d 100644
--- a/drivers/net/wireless/iwlwifi/pcie/internal.h
+++ b/drivers/net/wireless/iwlwifi/pcie/internal.h
@@ -304,7 +304,7 @@ struct iwl_trans_pcie {
 	bool bc_table_dword;
 	u32 rx_page_order;
 
-	const char **command_names;
+	const char *const *command_names;
 
 	/* queue watchdog */
 	unsigned long wd_timeout;
-- 
cgit v1.2.2


From 7b1dd048b53053d4c6339d1e6043fa7bb82ff93d Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Tue, 4 Feb 2014 15:32:43 +0200
Subject: iwlwifi: mvm: propagate LDPC / STBC status to radiotap

This will allow to get sniffer captures with correct
settings for these HT / VHT capabilities.
Also set the corresponding HAVE_MCS / VHT_KNOWN bits in
the registration to mac80211.

Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/fw-api-rs.h | 3 ++-
 drivers/net/wireless/iwlwifi/mvm/mac80211.c  | 4 ++++
 drivers/net/wireless/iwlwifi/mvm/rs.c        | 2 +-
 drivers/net/wireless/iwlwifi/mvm/rx.c        | 8 ++++++++
 4 files changed, 15 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-rs.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-rs.h
index 85057219cc43..39148b5bb332 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api-rs.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-rs.h
@@ -257,7 +257,8 @@ enum {
 
 /* Bit 17-18: (0) SS, (1) SS*2 */
 #define RATE_MCS_STBC_POS		17
-#define RATE_MCS_STBC_MSK		(1 << RATE_MCS_STBC_POS)
+#define RATE_MCS_HT_STBC_MSK		(3 << RATE_MCS_STBC_POS)
+#define RATE_MCS_VHT_STBC_MSK		(1 << RATE_MCS_STBC_POS)
 
 /* Bit 19: (0) Beamforming is off, (1) Beamforming is on */
 #define RATE_MCS_BF_POS			19
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index 42f70469e73b..2a1b4b628e2f 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -68,6 +68,7 @@
 #include <linux/ip.h>
 #include <linux/if_arp.h>
 #include <net/mac80211.h>
+#include <net/ieee80211_radiotap.h>
 #include <net/tcp.h>
 
 #include "iwl-op-mode.h"
@@ -280,6 +281,9 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm)
 
 	hw->queues = mvm->first_agg_queue;
 	hw->offchannel_tx_hw_queue = IWL_MVM_OFFCHANNEL_QUEUE;
+	hw->radiotap_mcs_details |= IEEE80211_RADIOTAP_MCS_HAVE_FEC |
+				    IEEE80211_RADIOTAP_MCS_HAVE_STBC;
+	hw->radiotap_vht_details |= IEEE80211_RADIOTAP_VHT_KNOWN_STBC;
 	hw->rate_control_algorithm = "iwl-mvm-rs";
 
 	/*
diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.c b/drivers/net/wireless/iwlwifi/mvm/rs.c
index 32bb8075121c..a6d0ab129c6b 100644
--- a/drivers/net/wireless/iwlwifi/mvm/rs.c
+++ b/drivers/net/wireless/iwlwifi/mvm/rs.c
@@ -2595,7 +2595,7 @@ static int rs_pretty_print_rate(char *buf, const u32 rate)
 	return sprintf(buf, "%s | ANT: %s BW: %s MCS: %d NSS: %d %s%s%s%s%s\n",
 		       type, rs_pretty_ant(ant), bw, mcs, nss,
 		       (rate & RATE_MCS_SGI_MSK) ? "SGI " : "NGI ",
-		       (rate & RATE_MCS_STBC_MSK) ? "STBC " : "",
+		       (rate & RATE_MCS_HT_STBC_MSK) ? "STBC " : "",
 		       (rate & RATE_MCS_LDPC_MSK) ? "LDPC " : "",
 		       (rate & RATE_MCS_BF_MSK) ? "BF " : "",
 		       (rate & RATE_MCS_ZLF_MSK) ? "ZLF " : "");
diff --git a/drivers/net/wireless/iwlwifi/mvm/rx.c b/drivers/net/wireless/iwlwifi/mvm/rx.c
index fa3c1393e103..817d3e0b37e2 100644
--- a/drivers/net/wireless/iwlwifi/mvm/rx.c
+++ b/drivers/net/wireless/iwlwifi/mvm/rx.c
@@ -368,15 +368,23 @@ int iwl_mvm_rx_rx_mpdu(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb,
 		rx_status.flag |= RX_FLAG_SHORT_GI;
 	if (rate_n_flags & RATE_HT_MCS_GF_MSK)
 		rx_status.flag |= RX_FLAG_HT_GF;
+	if (rate_n_flags & RATE_MCS_LDPC_MSK)
+		rx_status.flag |= RX_FLAG_LDPC;
 	if (rate_n_flags & RATE_MCS_HT_MSK) {
+		u8 stbc = (rate_n_flags & RATE_MCS_HT_STBC_MSK) >>
+				RATE_MCS_STBC_POS;
 		rx_status.flag |= RX_FLAG_HT;
 		rx_status.rate_idx = rate_n_flags & RATE_HT_MCS_INDEX_MSK;
+		rx_status.flag |= stbc << RX_FLAG_STBC_SHIFT;
 	} else if (rate_n_flags & RATE_MCS_VHT_MSK) {
+		u8 stbc = (rate_n_flags & RATE_MCS_VHT_STBC_MSK) >>
+				RATE_MCS_STBC_POS;
 		rx_status.vht_nss =
 			((rate_n_flags & RATE_VHT_MCS_NSS_MSK) >>
 						RATE_VHT_MCS_NSS_POS) + 1;
 		rx_status.rate_idx = rate_n_flags & RATE_VHT_MCS_RATE_CODE_MSK;
 		rx_status.flag |= RX_FLAG_VHT;
+		rx_status.flag |= stbc << RX_FLAG_STBC_SHIFT;
 	} else {
 		rx_status.rate_idx =
 			iwl_mvm_legacy_rate_to_mac80211_idx(rate_n_flags,
-- 
cgit v1.2.2


From 63f7535d6eb80a465d353c414d14560367c34fb2 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Fri, 31 Jan 2014 14:56:18 +0100
Subject: iwlwifi: mvm: use IEEE80211_TX_CTRL_PORT_CTRL_PROTO flag

Instead of checking the SKB protocol against EAP, check the
IEEE80211_TX_CTRL_PORT_CTRL_PROTO flag that more generally
indicates whether or not the frame is a port control frame.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/tx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/tx.c b/drivers/net/wireless/iwlwifi/mvm/tx.c
index 8d18bf23e4bf..852d9d87a14c 100644
--- a/drivers/net/wireless/iwlwifi/mvm/tx.c
+++ b/drivers/net/wireless/iwlwifi/mvm/tx.c
@@ -122,7 +122,7 @@ static void iwl_mvm_set_tx_cmd(struct iwl_mvm *mvm, struct sk_buff *skb,
 		 * it
 		 */
 		WARN_ON_ONCE(info->flags & IEEE80211_TX_CTL_AMPDU);
-	} else if (skb->protocol == cpu_to_be16(ETH_P_PAE)) {
+	} else if (info->control.flags & IEEE80211_TX_CTRL_PORT_CTRL_PROTO) {
 		tx_cmd->pm_frame_timeout = cpu_to_le16(2);
 	} else {
 		tx_cmd->pm_frame_timeout = 0;
-- 
cgit v1.2.2


From f3c221f6ea17f4fea250ac17c7f27ecb71e62465 Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Thu, 9 Jan 2014 13:12:54 +0200
Subject: iwlwifi: mvm: add debugfs for prph reg read/write

Allow reading/writing prph registers.

The address is set in the first argument
of the write operation. second argument
is optional and can be used for writing.

e.g.
echo '0xA01234 0x99' > /sys/kernel/debug/ieee80211/phy0/iwlwifi/iwlmvm/prph_reg
will write 0x99 into reg 0xA01234

cat /sys/kernel/debug/ieee80211/phy0/iwlwifi/iwlmvm/prph_reg
will show its current value (probably 0x99)

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/debugfs.c | 44 ++++++++++++++++++++++++++++++
 drivers/net/wireless/iwlwifi/mvm/mvm.h     |  1 +
 2 files changed, 45 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/debugfs.c b/drivers/net/wireless/iwlwifi/mvm/debugfs.c
index 6853e5efe522..9b9833720a24 100644
--- a/drivers/net/wireless/iwlwifi/mvm/debugfs.c
+++ b/drivers/net/wireless/iwlwifi/mvm/debugfs.c
@@ -907,6 +907,49 @@ static ssize_t iwl_dbgfs_d0i3_refs_write(struct iwl_mvm *mvm, char *buf,
 #define MVM_DEBUGFS_ADD_FILE(name, parent, mode) \
 	MVM_DEBUGFS_ADD_FILE_ALIAS(#name, name, parent, mode)
 
+static ssize_t
+iwl_dbgfs_prph_reg_read(struct file *file,
+			char __user *user_buf,
+			size_t count, loff_t *ppos)
+{
+	struct iwl_mvm *mvm = file->private_data;
+	int pos = 0;
+	char buf[32];
+	const size_t bufsz = sizeof(buf);
+
+	if (!mvm->dbgfs_prph_reg_addr)
+		return -EINVAL;
+
+	pos += scnprintf(buf + pos, bufsz - pos, "Reg 0x%x: (0x%x)\n",
+		mvm->dbgfs_prph_reg_addr,
+		iwl_read_prph(mvm->trans, mvm->dbgfs_prph_reg_addr));
+
+	return simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+}
+
+static ssize_t
+iwl_dbgfs_prph_reg_write(struct iwl_mvm *mvm, char *buf,
+			 size_t count, loff_t *ppos)
+{
+	u8 args;
+	u32 value;
+
+	args = sscanf(buf, "%i %i", &mvm->dbgfs_prph_reg_addr, &value);
+	/* if we only want to set the reg address - nothing more to do */
+	if (args == 1)
+		goto out;
+
+	/* otherwise, make sure we have both address and value */
+	if (args != 2)
+		return -EINVAL;
+
+	iwl_write_prph(mvm->trans, mvm->dbgfs_prph_reg_addr, value);
+out:
+	return count;
+}
+
+MVM_DEBUGFS_READ_WRITE_FILE_OPS(prph_reg, 64);
+
 /* Device wide debugfs entries */
 MVM_DEBUGFS_WRITE_FILE_OPS(tx_flush, 16);
 MVM_DEBUGFS_WRITE_FILE_OPS(sta_drain, 8);
@@ -951,6 +994,7 @@ int iwl_mvm_dbgfs_register(struct iwl_mvm *mvm, struct dentry *dbgfs_dir)
 	MVM_DEBUGFS_ADD_FILE(fw_nmi, mvm->debugfs_dir, S_IWUSR);
 	MVM_DEBUGFS_ADD_FILE(scan_ant_rxchain, mvm->debugfs_dir,
 			     S_IWUSR | S_IRUSR);
+	MVM_DEBUGFS_ADD_FILE(prph_reg, mvm->debugfs_dir, S_IWUSR | S_IRUSR);
 	MVM_DEBUGFS_ADD_FILE(d0i3_refs, mvm->debugfs_dir, S_IRUSR | S_IWUSR);
 
 #ifdef CONFIG_IWLWIFI_BCAST_FILTERING
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index bde8190bb6c4..29d11d93441d 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -518,6 +518,7 @@ struct iwl_mvm {
 #ifdef CONFIG_IWLWIFI_DEBUGFS
 	struct dentry *debugfs_dir;
 	u32 dbgfs_sram_offset, dbgfs_sram_len;
+	u32 dbgfs_prph_reg_addr;
 	bool disable_power_off;
 	bool disable_power_off_d3;
 
-- 
cgit v1.2.2


From 7303dd7f312f0d07a4bf45c62608d5233b5e8062 Mon Sep 17 00:00:00 2001
From: Alexander Bondar <alexander.bondar@intel.com>
Date: Mon, 3 Feb 2014 21:57:28 +0200
Subject: iwlwifi: mvm: Enable power save on BSS and P2P client in DCM

New FW enables support for power save on BSS and P2P client MACs
simultaneously when they function on different channels (DCM).
Enable this case in the driver after examining new TLV flag -
IWL_UCODE_TLV_FLAGS_BSS_P2P_PS_DCM. Still power management is not
allowed on both MACs if they function on a same channel.
Remove another redundant TLV flag - IWL_UCODE_TLV_FLAGS_P2P_PS that
is not in use anymore. Remove bound_vif_cnt as redundant.

Signed-off-by: Alexander Bondar <alexander.bondar@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-fw.h          |  6 ++--
 drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c |  2 +-
 drivers/net/wireless/iwlwifi/mvm/mac80211.c    |  6 ----
 drivers/net/wireless/iwlwifi/mvm/mvm.h         |  2 --
 drivers/net/wireless/iwlwifi/mvm/power.c       | 48 +++++++++++++++++++++-----
 5 files changed, 44 insertions(+), 20 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-fw.h b/drivers/net/wireless/iwlwifi/iwl-fw.h
index f80ba586c253..b0d09987540d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-fw.h
+++ b/drivers/net/wireless/iwlwifi/iwl-fw.h
@@ -92,8 +92,8 @@
  * @IWL_UCODE_TLV_FLAGS_STA_KEY_CMD: new ADD_STA and ADD_STA_KEY command API
  * @IWL_UCODE_TLV_FLAGS_DEVICE_PS_CMD: support device wide power command
  *	containing CAM (Continuous Active Mode) indication.
- * @IWL_UCODE_TLV_FLAGS_P2P_PS: P2P client power save is supported (only on a
- *	single bound interface).
+ * @IWL_UCODE_TLV_FLAGS_P2P_BSS_PS_DCM: support power save on BSS station and
+ *	P2P client interfaces simultaneously if they are in different bindings.
  * @IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD: P2P client supports uAPSD power save
  * @IWL_UCODE_TLV_FLAGS_BCAST_FILTERING: uCode supports broadcast filtering.
  * @IWL_UCODE_TLV_FLAGS_GO_UAPSD: AP/GO interfaces support uAPSD clients
@@ -118,7 +118,7 @@ enum iwl_ucode_tlv_flag {
 	IWL_UCODE_TLV_FLAGS_SCHED_SCAN		= BIT(17),
 	IWL_UCODE_TLV_FLAGS_STA_KEY_CMD		= BIT(19),
 	IWL_UCODE_TLV_FLAGS_DEVICE_PS_CMD	= BIT(20),
-	IWL_UCODE_TLV_FLAGS_P2P_PS		= BIT(21),
+	IWL_UCODE_TLV_FLAGS_BSS_P2P_PS_DCM	= BIT(22),
 	IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT	= BIT(24),
 	IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD	= BIT(26),
 	IWL_UCODE_TLV_FLAGS_BCAST_FILTERING	= BIT(29),
diff --git a/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c b/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c
index 29b4396018b1..f64e972191eb 100644
--- a/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c
+++ b/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c
@@ -591,7 +591,7 @@ void iwl_mvm_vif_dbgfs_register(struct iwl_mvm *mvm, struct ieee80211_vif *vif)
 	    iwlmvm_mod_params.power_scheme != IWL_POWER_SCHEME_CAM &&
 	    ((vif->type == NL80211_IFTYPE_STATION && !vif->p2p) ||
 	     (vif->type == NL80211_IFTYPE_STATION && vif->p2p &&
-	      mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_P2P_PS)))
+	      mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_BSS_P2P_PS_DCM)))
 		MVM_DEBUGFS_ADD_FILE_VIF(pm_params, mvmvif->dbgfs_dir, S_IWUSR |
 					 S_IRUSR);
 
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index 2a1b4b628e2f..83da68c8b4a9 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -1305,7 +1305,6 @@ static int iwl_mvm_start_ap_ibss(struct ieee80211_hw *hw,
 	mvmvif->ap_ibss_active = true;
 
 	/* power updated needs to be done before quotas */
-	mvm->bound_vif_cnt++;
 	iwl_mvm_power_update_mac(mvm, vif);
 
 	ret = iwl_mvm_update_quotas(mvm, vif);
@@ -1324,7 +1323,6 @@ static int iwl_mvm_start_ap_ibss(struct ieee80211_hw *hw,
 	return 0;
 
 out_quota_failed:
-	mvm->bound_vif_cnt--;
 	iwl_mvm_power_update_mac(mvm, vif);
 	mvmvif->ap_ibss_active = false;
 	iwl_mvm_send_rm_bcast_sta(mvm, &mvmvif->bcast_sta);
@@ -1361,7 +1359,6 @@ static void iwl_mvm_stop_ap_ibss(struct ieee80211_hw *hw,
 	iwl_mvm_send_rm_bcast_sta(mvm, &mvmvif->bcast_sta);
 	iwl_mvm_binding_remove_vif(mvm, vif);
 
-	mvm->bound_vif_cnt--;
 	iwl_mvm_power_update_mac(mvm, vif);
 
 	iwl_mvm_mac_ctxt_remove(mvm, vif);
@@ -2095,7 +2092,6 @@ static int iwl_mvm_assign_vif_chanctx(struct ieee80211_hw *hw,
 	 * Power state must be updated before quotas,
 	 * otherwise fw will complain.
 	 */
-	mvm->bound_vif_cnt++;
 	iwl_mvm_power_update_mac(mvm, vif);
 
 	/* Setting the quota at this stage is only required for monitor
@@ -2113,7 +2109,6 @@ static int iwl_mvm_assign_vif_chanctx(struct ieee80211_hw *hw,
 
  out_remove_binding:
 	iwl_mvm_binding_remove_vif(mvm, vif);
-	mvm->bound_vif_cnt--;
 	iwl_mvm_power_update_mac(mvm, vif);
  out_unlock:
 	mutex_unlock(&mvm->mutex);
@@ -2146,7 +2141,6 @@ static void iwl_mvm_unassign_vif_chanctx(struct ieee80211_hw *hw,
 	}
 
 	iwl_mvm_binding_remove_vif(mvm, vif);
-	mvm->bound_vif_cnt--;
 	iwl_mvm_power_update_mac(mvm, vif);
 
 out_unlock:
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index 29d11d93441d..823765ea89a9 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -587,8 +587,6 @@ struct iwl_mvm {
 	u8 first_agg_queue;
 	u8 last_agg_queue;
 
-	u8 bound_vif_cnt;
-
 	/* Indicate if device power save is allowed */
 	bool ps_disabled;
 	/* Indicate if device power management is allowed */
diff --git a/drivers/net/wireless/iwlwifi/mvm/power.c b/drivers/net/wireless/iwlwifi/mvm/power.c
index 4da1ea44f39a..def6ec5173b9 100644
--- a/drivers/net/wireless/iwlwifi/mvm/power.c
+++ b/drivers/net/wireless/iwlwifi/mvm/power.c
@@ -425,7 +425,7 @@ static int iwl_mvm_power_send_cmd(struct iwl_mvm *mvm,
 		return 0;
 
 	if (vif->p2p &&
-	    !(mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_P2P_PS))
+	    !(mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_BSS_P2P_PS_DCM))
 		return 0;
 
 	iwl_mvm_power_build_cmd(mvm, vif, &cmd);
@@ -511,8 +511,11 @@ int iwl_mvm_power_uapsd_misbehaving_ap_notif(struct iwl_mvm *mvm,
 struct iwl_power_constraint {
 	struct ieee80211_vif *bf_vif;
 	struct ieee80211_vif *bss_vif;
+	u16 bss_phyctx_id;
+	u16 p2p_phyctx_id;
 	bool pm_disabled;
 	bool ps_disabled;
+	struct iwl_mvm *mvm;
 };
 
 static void iwl_mvm_power_iterator(void *_data, u8 *mac,
@@ -520,6 +523,7 @@ static void iwl_mvm_power_iterator(void *_data, u8 *mac,
 {
 	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
 	struct iwl_power_constraint *power_iterator = _data;
+	struct iwl_mvm *mvm = power_iterator->mvm;
 
 	switch (ieee80211_vif_type_p2p(vif)) {
 	case NL80211_IFTYPE_P2P_DEVICE:
@@ -539,11 +543,28 @@ static void iwl_mvm_power_iterator(void *_data, u8 *mac,
 		break;
 
 	case NL80211_IFTYPE_P2P_CLIENT:
-		/* no BSS power mgmt if we have a P2P client*/
-		power_iterator->pm_disabled = true;
+		if (mvmvif->phy_ctxt)
+			power_iterator->p2p_phyctx_id = mvmvif->phy_ctxt->id;
+
+		IWL_DEBUG_POWER(mvm, "p2p: p2p_id=%d, bss_id=%d\n",
+				power_iterator->p2p_phyctx_id,
+				power_iterator->bss_phyctx_id);
+		if (!(mvm->fw->ucode_capa.flags &
+		      IWL_UCODE_TLV_FLAGS_BSS_P2P_PS_DCM)) {
+			/* no BSS power mgmt if we have a P2P client*/
+			power_iterator->pm_disabled = true;
+		} else if (power_iterator->p2p_phyctx_id < MAX_PHYS &&
+			   power_iterator->bss_phyctx_id < MAX_PHYS &&
+			   power_iterator->p2p_phyctx_id ==
+			   power_iterator->bss_phyctx_id) {
+			power_iterator->pm_disabled = true;
+		}
 		break;
 
 	case NL80211_IFTYPE_STATION:
+		if (mvmvif->phy_ctxt)
+			power_iterator->bss_phyctx_id = mvmvif->phy_ctxt->id;
+
 		/* we should have only one BSS vif */
 		WARN_ON(power_iterator->bss_vif);
 		power_iterator->bss_vif = vif;
@@ -551,6 +572,17 @@ static void iwl_mvm_power_iterator(void *_data, u8 *mac,
 		if (mvmvif->bf_data.bf_enabled &&
 		    !WARN_ON(power_iterator->bf_vif))
 			power_iterator->bf_vif = vif;
+
+		IWL_DEBUG_POWER(mvm, "bss: p2p_id=%d, bss_id=%d\n",
+				power_iterator->p2p_phyctx_id,
+				power_iterator->bss_phyctx_id);
+		if (mvm->fw->ucode_capa.flags &
+		    IWL_UCODE_TLV_FLAGS_BSS_P2P_PS_DCM &&
+			(power_iterator->p2p_phyctx_id < MAX_PHYS &&
+			 power_iterator->bss_phyctx_id < MAX_PHYS &&
+			 power_iterator->p2p_phyctx_id ==
+			 power_iterator->bss_phyctx_id))
+			power_iterator->pm_disabled = true;
 		break;
 
 	default:
@@ -572,16 +604,16 @@ iwl_mvm_power_get_global_constraint(struct iwl_mvm *mvm,
 	ieee80211_iterate_active_interfaces_atomic(mvm->hw,
 					    IEEE80211_IFACE_ITER_NORMAL,
 					    iwl_mvm_power_iterator, constraint);
-
-	/* TODO: remove this and determine this variable in the iterator */
-	if (mvm->bound_vif_cnt > 1)
-		constraint->pm_disabled = true;
 }
 
 int iwl_mvm_power_update_mac(struct iwl_mvm *mvm, struct ieee80211_vif *vif)
 {
 	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
-	struct iwl_power_constraint constraint = {};
+	struct iwl_power_constraint constraint = {
+		    .p2p_phyctx_id = MAX_PHYS,
+		    .bss_phyctx_id = MAX_PHYS,
+		    .mvm = mvm,
+	};
 	bool ba_enable;
 	int ret;
 
-- 
cgit v1.2.2


From 77db0a3c27dc0f027e5f3956f4ba77246c89a548 Mon Sep 17 00:00:00 2001
From: Eran Harary <eran.harary@intel.com>
Date: Tue, 4 Feb 2014 14:21:38 +0200
Subject: iwlwifi: mvm: new NVM format in family 8000

Support the changes below:
- Fields and sections structure were changed.
- the NVM file built from DWord instead of Words.
- sections header format was changed.

Signed-off-by: Eran Harary <eran.harary@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-drv.c          |   6 +
 drivers/net/wireless/iwlwifi/iwl-drv.h          |  14 ++
 drivers/net/wireless/iwlwifi/iwl-eeprom-parse.h |   5 +-
 drivers/net/wireless/iwlwifi/iwl-fw.h           |   8 +-
 drivers/net/wireless/iwlwifi/iwl-nvm-parse.c    | 239 +++++++++++++++++++-----
 drivers/net/wireless/iwlwifi/iwl-nvm-parse.h    |   3 +-
 drivers/net/wireless/iwlwifi/mvm/fw-api.h       |   4 +-
 drivers/net/wireless/iwlwifi/mvm/nvm.c          |  63 +++++--
 8 files changed, 271 insertions(+), 71 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-drv.c b/drivers/net/wireless/iwlwifi/iwl-drv.c
index b3bc30b4292b..662d9936485c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-drv.c
+++ b/drivers/net/wireless/iwlwifi/iwl-drv.c
@@ -728,6 +728,12 @@ static int iwl_parse_tlv_firmware(struct iwl_drv *drv,
 			if (tlv_len != sizeof(u32))
 				goto invalid_tlv_len;
 			drv->fw.phy_config = le32_to_cpup((__le32 *)tlv_data);
+			drv->fw.valid_tx_ant = (drv->fw.phy_config &
+						FW_PHY_CFG_TX_CHAIN) >>
+						FW_PHY_CFG_TX_CHAIN_POS;
+			drv->fw.valid_rx_ant = (drv->fw.phy_config &
+						FW_PHY_CFG_RX_CHAIN) >>
+						FW_PHY_CFG_RX_CHAIN_POS;
 			break;
 		 case IWL_UCODE_TLV_SECURE_SEC_RT:
 			iwl_store_ucode_sec(pieces, tlv_data, IWL_UCODE_REGULAR,
diff --git a/drivers/net/wireless/iwlwifi/iwl-drv.h b/drivers/net/wireless/iwlwifi/iwl-drv.h
index 592c01e11013..3c72cb710b0c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-drv.h
+++ b/drivers/net/wireless/iwlwifi/iwl-drv.h
@@ -70,6 +70,20 @@
 #define DRV_COPYRIGHT	"Copyright(c) 2003- 2014 Intel Corporation"
 #define DRV_AUTHOR     "<ilw@linux.intel.com>"
 
+/* radio config bits (actual values from NVM definition) */
+#define NVM_RF_CFG_DASH_MSK(x)   (x & 0x3)         /* bits 0-1   */
+#define NVM_RF_CFG_STEP_MSK(x)   ((x >> 2)  & 0x3) /* bits 2-3   */
+#define NVM_RF_CFG_TYPE_MSK(x)   ((x >> 4)  & 0x3) /* bits 4-5   */
+#define NVM_RF_CFG_PNUM_MSK(x)   ((x >> 6)  & 0x3) /* bits 6-7   */
+#define NVM_RF_CFG_TX_ANT_MSK(x) ((x >> 8)  & 0xF) /* bits 8-11  */
+#define NVM_RF_CFG_RX_ANT_MSK(x) ((x >> 12) & 0xF) /* bits 12-15 */
+
+#define NVM_RF_CFG_FLAVOR_MSK_FAMILY_8000(x)   (x & 0xF)
+#define NVM_RF_CFG_DASH_MSK_FAMILY_8000(x)   ((x >> 4) & 0xF)
+#define NVM_RF_CFG_STEP_MSK_FAMILY_8000(x)   ((x >> 8) & 0xF)
+#define NVM_RF_CFG_TYPE_MSK_FAMILY_8000(x)   ((x >> 12) & 0xFFF)
+#define NVM_RF_CFG_TX_ANT_MSK_FAMILY_8000(x) ((x >> 24) & 0xF)
+#define NVM_RF_CFG_RX_ANT_MSK_FAMILY_8000(x) ((x >> 28) & 0xF)
 
 /**
  * DOC: Driver system flows - drv component
diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.h b/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.h
index e3c7deafabe6..f0548b8a64b0 100644
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.h
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.h
@@ -81,16 +81,17 @@ struct iwl_nvm_data {
 	bool sku_cap_band_24GHz_enable;
 	bool sku_cap_band_52GHz_enable;
 	bool sku_cap_11n_enable;
+	bool sku_cap_11ac_enable;
 	bool sku_cap_amt_enable;
 	bool sku_cap_ipan_enable;
 
-	u8 radio_cfg_type;
+	u16 radio_cfg_type;
 	u8 radio_cfg_step;
 	u8 radio_cfg_dash;
 	u8 radio_cfg_pnum;
 	u8 valid_tx_ant, valid_rx_ant;
 
-	u16 nvm_version;
+	u32 nvm_version;
 	s8 max_tx_pwr_half_dbm;
 
 	struct ieee80211_supported_band bands[IEEE80211_NUM_BANDS];
diff --git a/drivers/net/wireless/iwlwifi/iwl-fw.h b/drivers/net/wireless/iwlwifi/iwl-fw.h
index b0d09987540d..73671072d0f6 100644
--- a/drivers/net/wireless/iwlwifi/iwl-fw.h
+++ b/drivers/net/wireless/iwlwifi/iwl-fw.h
@@ -288,6 +288,8 @@ struct iwl_fw {
 
 	struct iwl_tlv_calib_ctrl default_calib[IWL_UCODE_TYPE_MAX];
 	u32 phy_config;
+	u8 valid_tx_ant;
+	u8 valid_rx_ant;
 
 	bool mvm_fw;
 
@@ -296,14 +298,12 @@ struct iwl_fw {
 
 static inline u8 iwl_fw_valid_tx_ant(const struct iwl_fw *fw)
 {
-	return (fw->phy_config & FW_PHY_CFG_TX_CHAIN) >>
-		FW_PHY_CFG_TX_CHAIN_POS;
+	return fw->valid_tx_ant;
 }
 
 static inline u8 iwl_fw_valid_rx_ant(const struct iwl_fw *fw)
 {
-	return (fw->phy_config & FW_PHY_CFG_RX_CHAIN) >>
-		FW_PHY_CFG_RX_CHAIN_POS;
+	return fw->valid_rx_ant;
 }
 
 #endif  /* __iwl_fw_h__ */
diff --git a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
index 42780971aa04..df3ea60c87d9 100644
--- a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
+++ b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
@@ -71,7 +71,7 @@ enum wkp_nvm_offsets {
 	/* NVM HW-Section offset (in words) definitions */
 	HW_ADDR = 0x15,
 
-/* NVM SW-Section offset (in words) definitions */
+	/* NVM SW-Section offset (in words) definitions */
 	NVM_SW_SECTION = 0x1C0,
 	NVM_VERSION = 0,
 	RADIO_CFG = 1,
@@ -79,11 +79,32 @@ enum wkp_nvm_offsets {
 	N_HW_ADDRS = 3,
 	NVM_CHANNELS = 0x1E0 - NVM_SW_SECTION,
 
-/* NVM calibration section offset (in words) definitions */
+	/* NVM calibration section offset (in words) definitions */
 	NVM_CALIB_SECTION = 0x2B8,
 	XTAL_CALIB = 0x316 - NVM_CALIB_SECTION
 };
 
+enum family_8000_nvm_offsets {
+	/* NVM HW-Section offset (in words) definitions */
+	HW_ADDR0_FAMILY_8000 = 0x12,
+	HW_ADDR1_FAMILY_8000 = 0x16,
+	MAC_ADDRESS_OVERRIDE_FAMILY_8000 = 1,
+
+	/* NVM SW-Section offset (in words) definitions */
+	NVM_SW_SECTION_FAMILY_8000 = 0x1C0,
+	NVM_VERSION_FAMILY_8000 = 0,
+	RADIO_CFG_FAMILY_8000 = 2,
+	SKU_FAMILY_8000 = 4,
+	N_HW_ADDRS_FAMILY_8000 = 5,
+
+	/* NVM REGULATORY -Section offset (in words) definitions */
+	NVM_CHANNELS_FAMILY_8000 = 0,
+
+	/* NVM calibration section offset (in words) definitions */
+	NVM_CALIB_SECTION_FAMILY_8000 = 0x2B8,
+	XTAL_CALIB_FAMILY_8000 = 0x316 - NVM_CALIB_SECTION_FAMILY_8000
+};
+
 /* SKU Capabilities (actual values from NVM definition) */
 enum nvm_sku_bits {
 	NVM_SKU_CAP_BAND_24GHZ	= BIT(0),
@@ -92,14 +113,6 @@ enum nvm_sku_bits {
 	NVM_SKU_CAP_11AC_ENABLE	= BIT(3),
 };
 
-/* radio config bits (actual values from NVM definition) */
-#define NVM_RF_CFG_DASH_MSK(x)   (x & 0x3)         /* bits 0-1   */
-#define NVM_RF_CFG_STEP_MSK(x)   ((x >> 2)  & 0x3) /* bits 2-3   */
-#define NVM_RF_CFG_TYPE_MSK(x)   ((x >> 4)  & 0x3) /* bits 4-5   */
-#define NVM_RF_CFG_PNUM_MSK(x)   ((x >> 6)  & 0x3) /* bits 6-7   */
-#define NVM_RF_CFG_TX_ANT_MSK(x) ((x >> 8)  & 0xF) /* bits 8-11  */
-#define NVM_RF_CFG_RX_ANT_MSK(x) ((x >> 12) & 0xF) /* bits 12-15 */
-
 /*
  * These are the channel numbers in the order that they are stored in the NVM
  */
@@ -112,7 +125,17 @@ static const u8 iwl_nvm_channels[] = {
 	149, 153, 157, 161, 165
 };
 
+static const u8 iwl_nvm_channels_family_8000[] = {
+	/* 2.4 GHz */
+	1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13,
+	/* 5 GHz */
+	36, 40, 44, 48, 52, 56, 60, 64, 68, 72, 76, 80, 84, 88, 92,
+	96, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 144,
+	149, 153, 157, 161, 165, 169, 173, 177, 181
+};
+
 #define IWL_NUM_CHANNELS	ARRAY_SIZE(iwl_nvm_channels)
+#define IWL_NUM_CHANNELS_FAMILY_8000	ARRAY_SIZE(iwl_nvm_channels_family_8000)
 #define NUM_2GHZ_CHANNELS	14
 #define FIRST_2GHZ_HT_MINUS	5
 #define LAST_2GHZ_HT_PLUS	9
@@ -179,13 +202,23 @@ static int iwl_init_channel_map(struct device *dev, const struct iwl_cfg *cfg,
 	struct ieee80211_channel *channel;
 	u16 ch_flags;
 	bool is_5ghz;
+	int num_of_ch;
+	const u8 *nvm_chan;
+
+	if (cfg->device_family != IWL_DEVICE_FAMILY_8000) {
+		num_of_ch = IWL_NUM_CHANNELS;
+		nvm_chan = &iwl_nvm_channels[0];
+	} else {
+		num_of_ch = IWL_NUM_CHANNELS_FAMILY_8000;
+		nvm_chan = &iwl_nvm_channels_family_8000[0];
+	}
 
-	for (ch_idx = 0; ch_idx < IWL_NUM_CHANNELS; ch_idx++) {
+	for (ch_idx = 0; ch_idx < num_of_ch; ch_idx++) {
 		ch_flags = __le16_to_cpup(nvm_ch_flags + ch_idx);
 		if (!(ch_flags & NVM_CHANNEL_VALID)) {
 			IWL_DEBUG_EEPROM(dev,
 					 "Ch. %d Flags %x [%sGHz] - No traffic\n",
-					 iwl_nvm_channels[ch_idx],
+					 nvm_chan[ch_idx],
 					 ch_flags,
 					 (ch_idx >= NUM_2GHZ_CHANNELS) ?
 					 "5.2" : "2.4");
@@ -195,7 +228,7 @@ static int iwl_init_channel_map(struct device *dev, const struct iwl_cfg *cfg,
 		channel = &data->channels[n_channels];
 		n_channels++;
 
-		channel->hw_value = iwl_nvm_channels[ch_idx];
+		channel->hw_value = nvm_chan[ch_idx];
 		channel->band = (ch_idx < NUM_2GHZ_CHANNELS) ?
 				IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
 		channel->center_freq =
@@ -206,11 +239,11 @@ static int iwl_init_channel_map(struct device *dev, const struct iwl_cfg *cfg,
 		channel->flags = IEEE80211_CHAN_NO_HT40;
 		if (ch_idx < NUM_2GHZ_CHANNELS &&
 		    (ch_flags & NVM_CHANNEL_40MHZ)) {
-			if (iwl_nvm_channels[ch_idx] <= LAST_2GHZ_HT_PLUS)
+			if (nvm_chan[ch_idx] <= LAST_2GHZ_HT_PLUS)
 				channel->flags &= ~IEEE80211_CHAN_NO_HT40PLUS;
-			if (iwl_nvm_channels[ch_idx] >= FIRST_2GHZ_HT_MINUS)
+			if (nvm_chan[ch_idx] >= FIRST_2GHZ_HT_MINUS)
 				channel->flags &= ~IEEE80211_CHAN_NO_HT40MINUS;
-		} else if (iwl_nvm_channels[ch_idx] <= LAST_5GHZ_HT &&
+		} else if (nvm_chan[ch_idx] <= LAST_5GHZ_HT &&
 			   (ch_flags & NVM_CHANNEL_40MHZ)) {
 			if ((ch_idx - NUM_2GHZ_CHANNELS) % 2 == 0)
 				channel->flags &= ~IEEE80211_CHAN_NO_HT40PLUS;
@@ -302,14 +335,23 @@ static void iwl_init_vht_hw_capab(const struct iwl_cfg *cfg,
 }
 
 static void iwl_init_sbands(struct device *dev, const struct iwl_cfg *cfg,
-			    struct iwl_nvm_data *data, const __le16 *nvm_sw,
-			    bool enable_vht, u8 tx_chains, u8 rx_chains)
+			    struct iwl_nvm_data *data,
+			    const __le16 *ch_section, bool enable_vht,
+			    u8 tx_chains, u8 rx_chains)
 {
-	int n_channels = iwl_init_channel_map(dev, cfg, data,
-			&nvm_sw[NVM_CHANNELS]);
+	int n_channels;
 	int n_used = 0;
 	struct ieee80211_supported_band *sband;
 
+	if (cfg->device_family != IWL_DEVICE_FAMILY_8000)
+		n_channels = iwl_init_channel_map(
+				dev, cfg, data,
+				&ch_section[NVM_CHANNELS]);
+	else
+		n_channels = iwl_init_channel_map(
+				dev, cfg, data,
+				&ch_section[NVM_CHANNELS_FAMILY_8000]);
+
 	sband = &data->bands[IEEE80211_BAND_2GHZ];
 	sband->band = IEEE80211_BAND_2GHZ;
 	sband->bitrates = &iwl_cfg80211_rates[RATES_24_OFFS];
@@ -335,35 +377,122 @@ static void iwl_init_sbands(struct device *dev, const struct iwl_cfg *cfg,
 			    n_used, n_channels);
 }
 
+static int iwl_get_sku(const struct iwl_cfg *cfg,
+		       const __le16 *nvm_sw)
+{
+	if (cfg->device_family != IWL_DEVICE_FAMILY_8000)
+		return le16_to_cpup(nvm_sw + SKU);
+	else
+		return le32_to_cpup((__le32 *)(nvm_sw + SKU_FAMILY_8000));
+}
+
+static int iwl_get_nvm_version(const struct iwl_cfg *cfg,
+			       const __le16 *nvm_sw)
+{
+	if (cfg->device_family != IWL_DEVICE_FAMILY_8000)
+		return le16_to_cpup(nvm_sw + NVM_VERSION);
+	else
+		return le32_to_cpup((__le32 *)(nvm_sw +
+					       NVM_VERSION_FAMILY_8000));
+}
+
+static int iwl_get_radio_cfg(const struct iwl_cfg *cfg,
+			     const __le16 *nvm_sw)
+{
+	if (cfg->device_family != IWL_DEVICE_FAMILY_8000)
+		return le16_to_cpup(nvm_sw + RADIO_CFG);
+	else
+		return le32_to_cpup((__le32 *)(nvm_sw + RADIO_CFG_FAMILY_8000));
+}
+
+#define N_HW_ADDRS_MASK_FAMILY_8000	0xF
+static int iwl_get_n_hw_addrs(const struct iwl_cfg *cfg,
+			      const __le16 *nvm_sw)
+{
+	if (cfg->device_family != IWL_DEVICE_FAMILY_8000)
+		return le16_to_cpup(nvm_sw + N_HW_ADDRS);
+	else
+		return le32_to_cpup((__le32 *)(nvm_sw + N_HW_ADDRS_FAMILY_8000))
+		       & N_HW_ADDRS_MASK_FAMILY_8000;
+}
+
+static void iwl_set_radio_cfg(const struct iwl_cfg *cfg,
+			      struct iwl_nvm_data *data,
+			      u32 radio_cfg)
+{
+	if (cfg->device_family != IWL_DEVICE_FAMILY_8000) {
+		data->radio_cfg_type = NVM_RF_CFG_TYPE_MSK(radio_cfg);
+		data->radio_cfg_step = NVM_RF_CFG_STEP_MSK(radio_cfg);
+		data->radio_cfg_dash = NVM_RF_CFG_DASH_MSK(radio_cfg);
+		data->radio_cfg_pnum = NVM_RF_CFG_PNUM_MSK(radio_cfg);
+		data->valid_tx_ant = NVM_RF_CFG_TX_ANT_MSK(radio_cfg);
+		data->valid_rx_ant = NVM_RF_CFG_RX_ANT_MSK(radio_cfg);
+		return;
+	}
+
+	/* set the radio configuration for family 8000 */
+	data->radio_cfg_type = NVM_RF_CFG_TYPE_MSK_FAMILY_8000(radio_cfg);
+	data->radio_cfg_step = NVM_RF_CFG_STEP_MSK_FAMILY_8000(radio_cfg);
+	data->radio_cfg_dash = NVM_RF_CFG_DASH_MSK_FAMILY_8000(radio_cfg);
+	data->radio_cfg_pnum = NVM_RF_CFG_FLAVOR_MSK_FAMILY_8000(radio_cfg);
+	data->valid_tx_ant = NVM_RF_CFG_TX_ANT_MSK_FAMILY_8000(radio_cfg);
+	data->valid_rx_ant = NVM_RF_CFG_RX_ANT_MSK_FAMILY_8000(radio_cfg);
+}
+
+static void iwl_set_hw_address(const struct iwl_cfg *cfg,
+			       struct iwl_nvm_data *data,
+			       const __le16 *nvm_sec)
+{
+	u8 hw_addr[ETH_ALEN];
+
+	if (cfg->device_family != IWL_DEVICE_FAMILY_8000)
+		memcpy(hw_addr, nvm_sec + HW_ADDR, ETH_ALEN);
+	else
+		memcpy(hw_addr, nvm_sec + MAC_ADDRESS_OVERRIDE_FAMILY_8000,
+		       ETH_ALEN);
+
+	/* The byte order is little endian 16 bit, meaning 214365 */
+	data->hw_addr[0] = hw_addr[1];
+	data->hw_addr[1] = hw_addr[0];
+	data->hw_addr[2] = hw_addr[3];
+	data->hw_addr[3] = hw_addr[2];
+	data->hw_addr[4] = hw_addr[5];
+	data->hw_addr[5] = hw_addr[4];
+}
+
 struct iwl_nvm_data *
 iwl_parse_nvm_data(struct device *dev, const struct iwl_cfg *cfg,
 		   const __le16 *nvm_hw, const __le16 *nvm_sw,
-		   const __le16 *nvm_calib, u8 tx_chains, u8 rx_chains)
+		   const __le16 *nvm_calib, const __le16 *regulatory,
+		   const __le16 *mac_override, u8 tx_chains, u8 rx_chains)
 {
 	struct iwl_nvm_data *data;
-	u8 hw_addr[ETH_ALEN];
-	u16 radio_cfg, sku;
-
-	data = kzalloc(sizeof(*data) +
-		       sizeof(struct ieee80211_channel) * IWL_NUM_CHANNELS,
-		       GFP_KERNEL);
+	u32 sku;
+	u32 radio_cfg;
+
+	if (cfg->device_family != IWL_DEVICE_FAMILY_8000)
+		data = kzalloc(sizeof(*data) +
+			       sizeof(struct ieee80211_channel) *
+			       IWL_NUM_CHANNELS,
+			       GFP_KERNEL);
+	else
+		data = kzalloc(sizeof(*data) +
+			       sizeof(struct ieee80211_channel) *
+			       IWL_NUM_CHANNELS_FAMILY_8000,
+			       GFP_KERNEL);
 	if (!data)
 		return NULL;
 
-	data->nvm_version = le16_to_cpup(nvm_sw + NVM_VERSION);
+	data->nvm_version = iwl_get_nvm_version(cfg, nvm_sw);
 
-	radio_cfg = le16_to_cpup(nvm_sw + RADIO_CFG);
-	data->radio_cfg_type = NVM_RF_CFG_TYPE_MSK(radio_cfg);
-	data->radio_cfg_step = NVM_RF_CFG_STEP_MSK(radio_cfg);
-	data->radio_cfg_dash = NVM_RF_CFG_DASH_MSK(radio_cfg);
-	data->radio_cfg_pnum = NVM_RF_CFG_PNUM_MSK(radio_cfg);
-	data->valid_tx_ant = NVM_RF_CFG_TX_ANT_MSK(radio_cfg);
-	data->valid_rx_ant = NVM_RF_CFG_RX_ANT_MSK(radio_cfg);
+	radio_cfg = iwl_get_radio_cfg(cfg, nvm_sw);
+	iwl_set_radio_cfg(cfg, data, radio_cfg);
 
-	sku = le16_to_cpup(nvm_sw + SKU);
+	sku = iwl_get_sku(cfg, nvm_sw);
 	data->sku_cap_band_24GHz_enable = sku & NVM_SKU_CAP_BAND_24GHZ;
 	data->sku_cap_band_52GHz_enable = sku & NVM_SKU_CAP_BAND_52GHZ;
 	data->sku_cap_11n_enable = sku & NVM_SKU_CAP_11N_ENABLE;
+	data->sku_cap_11ac_enable = sku & NVM_SKU_CAP_11AC_ENABLE;
 	if (iwlwifi_mod_params.disable_11n & IWL_DISABLE_HT_ALL)
 		data->sku_cap_11n_enable = false;
 
@@ -380,22 +509,34 @@ iwl_parse_nvm_data(struct device *dev, const struct iwl_cfg *cfg,
 		return NULL;
 	}
 
-	data->n_hw_addrs = le16_to_cpup(nvm_sw + N_HW_ADDRS);
+	data->n_hw_addrs = iwl_get_n_hw_addrs(cfg, nvm_sw);
 
-	data->xtal_calib[0] = *(nvm_calib + XTAL_CALIB);
-	data->xtal_calib[1] = *(nvm_calib + XTAL_CALIB + 1);
+	if (cfg->device_family != IWL_DEVICE_FAMILY_8000) {
+		/* Checking for required sections */
+		if (!nvm_calib) {
+			IWL_ERR_DEV(dev,
+				    "Can't parse empty Calib NVM sections\n");
+			return NULL;
+		}
+		/* in family 8000 Xtal calibration values moved to OTP */
+		data->xtal_calib[0] = *(nvm_calib + XTAL_CALIB);
+		data->xtal_calib[1] = *(nvm_calib + XTAL_CALIB + 1);
+	}
 
-	/* The byte order is little endian 16 bit, meaning 214365 */
-	memcpy(hw_addr, nvm_hw + HW_ADDR, ETH_ALEN);
-	data->hw_addr[0] = hw_addr[1];
-	data->hw_addr[1] = hw_addr[0];
-	data->hw_addr[2] = hw_addr[3];
-	data->hw_addr[3] = hw_addr[2];
-	data->hw_addr[4] = hw_addr[5];
-	data->hw_addr[5] = hw_addr[4];
+	if (cfg->device_family != IWL_DEVICE_FAMILY_8000) {
+		iwl_set_hw_address(cfg, data, nvm_hw);
+
+		iwl_init_sbands(dev, cfg, data, nvm_sw,
+				sku & NVM_SKU_CAP_11AC_ENABLE, tx_chains,
+				rx_chains);
+	} else {
+		/* MAC address in family 8000 */
+		iwl_set_hw_address(cfg, data, mac_override);
 
-	iwl_init_sbands(dev, cfg, data, nvm_sw, sku & NVM_SKU_CAP_11AC_ENABLE,
-			tx_chains, rx_chains);
+		iwl_init_sbands(dev, cfg, data, regulatory,
+				sku & NVM_SKU_CAP_11AC_ENABLE, tx_chains,
+				rx_chains);
+	}
 
 	data->calib_version = 255;
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.h b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.h
index 0c4399aba8c6..c9c45a39d212 100644
--- a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.h
+++ b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.h
@@ -75,6 +75,7 @@
 struct iwl_nvm_data *
 iwl_parse_nvm_data(struct device *dev, const struct iwl_cfg *cfg,
 		   const __le16 *nvm_hw, const __le16 *nvm_sw,
-		   const __le16 *nvm_calib, u8 tx_chains, u8 rx_chains);
+		   const __le16 *nvm_calib, const __le16 *regulatory,
+		   const __le16 *mac_override, u8 tx_chains, u8 rx_chains);
 
 #endif /* __iwl_nvm_parse_h__ */
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/iwlwifi/mvm/fw-api.h
index a7c88f1402e9..4d808a91ea7f 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api.h
@@ -306,7 +306,6 @@ struct iwl_phy_cfg_cmd {
 #define PHY_CFG_RX_CHAIN_B	BIT(13)
 #define PHY_CFG_RX_CHAIN_C	BIT(14)
 
-#define NVM_MAX_NUM_SECTIONS	11
 
 /* Target of the NVM_ACCESS_CMD */
 enum {
@@ -318,8 +317,11 @@ enum {
 /* Section types for NVM_ACCESS_CMD */
 enum {
 	NVM_SECTION_TYPE_SW = 1,
+	NVM_SECTION_TYPE_REGULATORY = 3,
 	NVM_SECTION_TYPE_CALIBRATION = 4,
 	NVM_SECTION_TYPE_PRODUCTION = 5,
+	NVM_SECTION_TYPE_MAC_OVERRIDE = 11,
+	NVM_MAX_NUM_SECTIONS = 12,
 };
 
 /**
diff --git a/drivers/net/wireless/iwlwifi/mvm/nvm.c b/drivers/net/wireless/iwlwifi/mvm/nvm.c
index 2d5251b3600c..e80e81a3f828 100644
--- a/drivers/net/wireless/iwlwifi/mvm/nvm.c
+++ b/drivers/net/wireless/iwlwifi/mvm/nvm.c
@@ -228,13 +228,23 @@ static struct iwl_nvm_data *
 iwl_parse_nvm_sections(struct iwl_mvm *mvm)
 {
 	struct iwl_nvm_section *sections = mvm->nvm_sections;
-	const __le16 *hw, *sw, *calib;
+	const __le16 *hw, *sw, *calib, *regulatory, *mac_override;
 
 	/* Checking for required sections */
-	if (!mvm->nvm_sections[NVM_SECTION_TYPE_SW].data ||
-	    !mvm->nvm_sections[mvm->cfg->nvm_hw_section_num].data) {
-		IWL_ERR(mvm, "Can't parse empty NVM sections\n");
-		return NULL;
+	if (mvm->trans->cfg->device_family != IWL_DEVICE_FAMILY_8000) {
+		if (!mvm->nvm_sections[NVM_SECTION_TYPE_SW].data ||
+		    !mvm->nvm_sections[mvm->cfg->nvm_hw_section_num].data) {
+			IWL_ERR(mvm, "Can't parse empty NVM sections\n");
+			return NULL;
+		}
+	} else {
+		if (!mvm->nvm_sections[NVM_SECTION_TYPE_SW].data ||
+		    !mvm->nvm_sections[NVM_SECTION_TYPE_MAC_OVERRIDE].data ||
+		    !mvm->nvm_sections[NVM_SECTION_TYPE_REGULATORY].data) {
+			IWL_ERR(mvm,
+				"Can't parse empty family 8000 NVM sections\n");
+			return NULL;
+		}
 	}
 
 	if (WARN_ON(!mvm->cfg))
@@ -243,7 +253,12 @@ iwl_parse_nvm_sections(struct iwl_mvm *mvm)
 	hw = (const __le16 *)sections[mvm->cfg->nvm_hw_section_num].data;
 	sw = (const __le16 *)sections[NVM_SECTION_TYPE_SW].data;
 	calib = (const __le16 *)sections[NVM_SECTION_TYPE_CALIBRATION].data;
+	regulatory = (const __le16 *)sections[NVM_SECTION_TYPE_REGULATORY].data;
+	mac_override =
+		(const __le16 *)sections[NVM_SECTION_TYPE_MAC_OVERRIDE].data;
+
 	return iwl_parse_nvm_data(mvm->trans->dev, mvm->cfg, hw, sw, calib,
+				  regulatory, mac_override,
 				  iwl_fw_valid_tx_ant(mvm->fw),
 				  iwl_fw_valid_rx_ant(mvm->fw));
 }
@@ -285,6 +300,8 @@ static int iwl_mvm_read_external_nvm(struct iwl_mvm *mvm)
 
 #define NVM_WORD1_LEN(x) (8 * (x & 0x03FF))
 #define NVM_WORD2_ID(x) (x >> 12)
+#define NVM_WORD2_LEN_FAMILY_8000(x) (2 * ((x & 0xFF) << 8 | x >> 8))
+#define NVM_WORD1_ID_FAMILY_8000(x) (x >> 4)
 
 	IWL_DEBUG_EEPROM(mvm->trans->dev, "Read from external NVM\n");
 
@@ -335,8 +352,16 @@ static int iwl_mvm_read_external_nvm(struct iwl_mvm *mvm)
 			break;
 		}
 
-		section_size = 2 * NVM_WORD1_LEN(le16_to_cpu(file_sec->word1));
-		section_id = NVM_WORD2_ID(le16_to_cpu(file_sec->word2));
+		if (mvm->trans->cfg->device_family != IWL_DEVICE_FAMILY_8000) {
+			section_size =
+				2 * NVM_WORD1_LEN(le16_to_cpu(file_sec->word1));
+			section_id = NVM_WORD2_ID(le16_to_cpu(file_sec->word2));
+		} else {
+			section_size = 2 * NVM_WORD2_LEN_FAMILY_8000(
+						le16_to_cpu(file_sec->word2));
+			section_id = NVM_WORD1_ID_FAMILY_8000(
+						le16_to_cpu(file_sec->word1));
+		}
 
 		if (section_size > IWL_MAX_NVM_SECTION_SIZE) {
 			IWL_ERR(mvm, "ERROR - section too large (%d)\n",
@@ -406,6 +431,8 @@ int iwl_nvm_init(struct iwl_mvm *mvm)
 {
 	int ret, i, section;
 	u8 *nvm_buffer, *temp;
+	int nvm_to_read[NVM_MAX_NUM_SECTIONS];
+	int num_of_sections_to_read;
 
 	if (WARN_ON_ONCE(mvm->cfg->nvm_hw_section_num >= NVM_MAX_NUM_SECTIONS))
 		return -EINVAL;
@@ -418,12 +445,20 @@ int iwl_nvm_init(struct iwl_mvm *mvm)
 			return ret;
 	} else {
 		/* list of NVM sections we are allowed/need to read */
-		int nvm_to_read[] = {
-			mvm->cfg->nvm_hw_section_num,
-			NVM_SECTION_TYPE_SW,
-			NVM_SECTION_TYPE_CALIBRATION,
-			NVM_SECTION_TYPE_PRODUCTION,
-		};
+		if (mvm->trans->cfg->device_family != IWL_DEVICE_FAMILY_8000) {
+			nvm_to_read[0] = mvm->cfg->nvm_hw_section_num;
+			nvm_to_read[1] = NVM_SECTION_TYPE_SW;
+			nvm_to_read[2] = NVM_SECTION_TYPE_CALIBRATION;
+			nvm_to_read[3] = NVM_SECTION_TYPE_PRODUCTION;
+			num_of_sections_to_read = 4;
+		} else {
+			nvm_to_read[0] = NVM_SECTION_TYPE_SW;
+			nvm_to_read[1] = NVM_SECTION_TYPE_CALIBRATION;
+			nvm_to_read[2] = NVM_SECTION_TYPE_PRODUCTION;
+			nvm_to_read[3] = NVM_SECTION_TYPE_REGULATORY;
+			nvm_to_read[4] = NVM_SECTION_TYPE_MAC_OVERRIDE;
+			num_of_sections_to_read = 5;
+		}
 
 		/* Read From FW NVM */
 		IWL_DEBUG_EEPROM(mvm->trans->dev, "Read from NVM\n");
@@ -433,7 +468,7 @@ int iwl_nvm_init(struct iwl_mvm *mvm)
 				     GFP_KERNEL);
 		if (!nvm_buffer)
 			return -ENOMEM;
-		for (i = 0; i < ARRAY_SIZE(nvm_to_read); i++) {
+		for (i = 0; i < num_of_sections_to_read; i++) {
 			section = nvm_to_read[i];
 			/* we override the constness for initial read */
 			ret = iwl_nvm_read_section(mvm, section, nvm_buffer);
-- 
cgit v1.2.2


From 4ed735e7599e60add8b04669a3ff6af69a31f769 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Wed, 12 Feb 2014 21:47:44 +0100
Subject: iwlwifi: remove iwl_fw_valid_(tx|rx)_ant inlines

These inlines are pretty pointless now as they just return a
fixed struct value, remove them - the code even gets shorter.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Eran Harary <eran.harary@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-fw.h       | 10 ----------
 drivers/net/wireless/iwlwifi/mvm/debugfs.c  |  2 +-
 drivers/net/wireless/iwlwifi/mvm/fw.c       |  6 +++---
 drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c |  2 +-
 drivers/net/wireless/iwlwifi/mvm/nvm.c      |  4 ++--
 drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c |  4 ++--
 drivers/net/wireless/iwlwifi/mvm/rs.c       | 18 +++++++++---------
 drivers/net/wireless/iwlwifi/mvm/scan.c     |  4 ++--
 drivers/net/wireless/iwlwifi/mvm/tx.c       |  2 +-
 drivers/net/wireless/iwlwifi/mvm/utils.c    |  2 +-
 10 files changed, 22 insertions(+), 32 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-fw.h b/drivers/net/wireless/iwlwifi/iwl-fw.h
index 73671072d0f6..af6b4528d499 100644
--- a/drivers/net/wireless/iwlwifi/iwl-fw.h
+++ b/drivers/net/wireless/iwlwifi/iwl-fw.h
@@ -296,14 +296,4 @@ struct iwl_fw {
 	struct ieee80211_cipher_scheme cs[IWL_UCODE_MAX_CS];
 };
 
-static inline u8 iwl_fw_valid_tx_ant(const struct iwl_fw *fw)
-{
-	return fw->valid_tx_ant;
-}
-
-static inline u8 iwl_fw_valid_rx_ant(const struct iwl_fw *fw)
-{
-	return fw->valid_rx_ant;
-}
-
 #endif  /* __iwl_fw_h__ */
diff --git a/drivers/net/wireless/iwlwifi/mvm/debugfs.c b/drivers/net/wireless/iwlwifi/mvm/debugfs.c
index 9b9833720a24..3278b4890823 100644
--- a/drivers/net/wireless/iwlwifi/mvm/debugfs.c
+++ b/drivers/net/wireless/iwlwifi/mvm/debugfs.c
@@ -591,7 +591,7 @@ iwl_dbgfs_scan_ant_rxchain_write(struct iwl_mvm *mvm, char *buf,
 		return -EINVAL;
 	if (scan_rx_ant > ANT_ABC)
 		return -EINVAL;
-	if (scan_rx_ant & ~iwl_fw_valid_rx_ant(mvm->fw))
+	if (scan_rx_ant & ~mvm->fw->valid_rx_ant)
 		return -EINVAL;
 
 	mvm->scan_rx_ant = scan_rx_ant;
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw.c b/drivers/net/wireless/iwlwifi/mvm/fw.c
index bae75b308fc0..4f398e63f44a 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw.c
+++ b/drivers/net/wireless/iwlwifi/mvm/fw.c
@@ -320,7 +320,7 @@ int iwl_run_init_mvm_ucode(struct iwl_mvm *mvm, bool read_nvm)
 	}
 
 	/* Send TX valid antennas before triggering calibrations */
-	ret = iwl_send_tx_ant_cfg(mvm, iwl_fw_valid_tx_ant(mvm->fw));
+	ret = iwl_send_tx_ant_cfg(mvm, mvm->fw->valid_tx_ant);
 	if (ret)
 		goto error;
 
@@ -422,7 +422,7 @@ int iwl_mvm_up(struct iwl_mvm *mvm)
 	if (ret)
 		IWL_ERR(mvm, "Failed to initialize Smart Fifo\n");
 
-	ret = iwl_send_tx_ant_cfg(mvm, iwl_fw_valid_tx_ant(mvm->fw));
+	ret = iwl_send_tx_ant_cfg(mvm, mvm->fw->valid_tx_ant);
 	if (ret)
 		goto error;
 
@@ -507,7 +507,7 @@ int iwl_mvm_load_d3_fw(struct iwl_mvm *mvm)
 		goto error;
 	}
 
-	ret = iwl_send_tx_ant_cfg(mvm, iwl_fw_valid_tx_ant(mvm->fw));
+	ret = iwl_send_tx_ant_cfg(mvm, mvm->fw->valid_tx_ant);
 	if (ret)
 		goto error;
 
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c b/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c
index 5c21aabb40cb..9ccec10bba16 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c
@@ -952,7 +952,7 @@ static int iwl_mvm_mac_ctxt_send_beacon(struct iwl_mvm *mvm,
 					     TX_CMD_FLG_TSF);
 
 	mvm->mgmt_last_antenna_idx =
-		iwl_mvm_next_antenna(mvm, iwl_fw_valid_tx_ant(mvm->fw),
+		iwl_mvm_next_antenna(mvm, mvm->fw->valid_tx_ant,
 				     mvm->mgmt_last_antenna_idx);
 
 	beacon_cmd.tx.rate_n_flags =
diff --git a/drivers/net/wireless/iwlwifi/mvm/nvm.c b/drivers/net/wireless/iwlwifi/mvm/nvm.c
index e80e81a3f828..cf2d09f53782 100644
--- a/drivers/net/wireless/iwlwifi/mvm/nvm.c
+++ b/drivers/net/wireless/iwlwifi/mvm/nvm.c
@@ -259,8 +259,8 @@ iwl_parse_nvm_sections(struct iwl_mvm *mvm)
 
 	return iwl_parse_nvm_data(mvm->trans->dev, mvm->cfg, hw, sw, calib,
 				  regulatory, mac_override,
-				  iwl_fw_valid_tx_ant(mvm->fw),
-				  iwl_fw_valid_rx_ant(mvm->fw));
+				  mvm->fw->valid_tx_ant,
+				  mvm->fw->valid_rx_ant);
 }
 
 #define MAX_NVM_FILE_LEN	16384
diff --git a/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c b/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c
index b7268c0b3333..237efe0ac1c4 100644
--- a/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c
+++ b/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c
@@ -156,13 +156,13 @@ static void iwl_mvm_phy_ctxt_cmd_data(struct iwl_mvm *mvm,
 	idle_cnt = chains_static;
 	active_cnt = chains_dynamic;
 
-	cmd->rxchain_info = cpu_to_le32(iwl_fw_valid_rx_ant(mvm->fw) <<
+	cmd->rxchain_info = cpu_to_le32(mvm->fw->valid_rx_ant <<
 					PHY_RX_CHAIN_VALID_POS);
 	cmd->rxchain_info |= cpu_to_le32(idle_cnt << PHY_RX_CHAIN_CNT_POS);
 	cmd->rxchain_info |= cpu_to_le32(active_cnt <<
 					 PHY_RX_CHAIN_MIMO_CNT_POS);
 
-	cmd->txchain_info = cpu_to_le32(iwl_fw_valid_tx_ant(mvm->fw));
+	cmd->txchain_info = cpu_to_le32(mvm->fw->valid_tx_ant);
 }
 
 /*
diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.c b/drivers/net/wireless/iwlwifi/mvm/rs.c
index a6d0ab129c6b..77c6e36c71cd 100644
--- a/drivers/net/wireless/iwlwifi/mvm/rs.c
+++ b/drivers/net/wireless/iwlwifi/mvm/rs.c
@@ -166,7 +166,7 @@ static bool rs_mimo_allow(struct iwl_mvm *mvm, struct ieee80211_sta *sta,
 	if (sta->smps_mode == IEEE80211_SMPS_STATIC)
 		return false;
 
-	if (num_of_ant(iwl_fw_valid_tx_ant(mvm->fw)) < 2)
+	if (num_of_ant(mvm->fw->valid_tx_ant) < 2)
 		return false;
 
 	if (!iwl_mvm_bt_coex_is_mimo_allowed(mvm, sta))
@@ -917,7 +917,7 @@ static void rs_get_lower_rate_down_column(struct iwl_lq_sta *lq_sta,
 
 
 	if (num_of_ant(rate->ant) > 1)
-		rate->ant = first_antenna(iwl_fw_valid_tx_ant(mvm->fw));
+		rate->ant = first_antenna(mvm->fw->valid_tx_ant);
 
 	/* Relevant in both switching to SISO or Legacy */
 	rate->sgi = false;
@@ -1477,7 +1477,7 @@ static enum rs_column rs_get_next_column(struct iwl_mvm *mvm,
 	const struct rs_tx_column *curr_col = &rs_tx_columns[tbl->column];
 	const struct rs_tx_column *next_col;
 	allow_column_func_t allow_func;
-	u8 valid_ants = iwl_fw_valid_tx_ant(mvm->fw);
+	u8 valid_ants = mvm->fw->valid_tx_ant;
 	const u16 *expected_tpt_tbl;
 	s32 tpt, max_expected_tpt;
 
@@ -2089,7 +2089,7 @@ static void rs_initialize_lq(struct iwl_mvm *mvm,
 
 	i = lq_sta->last_txrate_idx;
 
-	valid_tx_ant = iwl_fw_valid_tx_ant(mvm->fw);
+	valid_tx_ant = mvm->fw->valid_tx_ant;
 
 	if (!lq_sta->search_better_tbl)
 		active_tbl = lq_sta->active_tbl;
@@ -2319,7 +2319,7 @@ void iwl_mvm_rs_rate_init(struct iwl_mvm *mvm, struct ieee80211_sta *sta,
 
 	/* These values will be overridden later */
 	lq_sta->lq.single_stream_ant_msk =
-		first_antenna(iwl_fw_valid_tx_ant(mvm->fw));
+		first_antenna(mvm->fw->valid_tx_ant);
 	lq_sta->lq.dual_stream_ant_msk = ANT_AB;
 
 	/* as default allow aggregation for all tids */
@@ -2445,7 +2445,7 @@ static void rs_build_rates_table(struct iwl_mvm *mvm,
 
 	memcpy(&rate, initial_rate, sizeof(rate));
 
-	valid_tx_ant = iwl_fw_valid_tx_ant(mvm->fw);
+	valid_tx_ant = mvm->fw->valid_tx_ant;
 
 	if (is_siso(&rate)) {
 		num_rates = RS_INITIAL_SISO_NUM_RATES;
@@ -2676,9 +2676,9 @@ static ssize_t rs_sta_dbgfs_scale_table_read(struct file *file,
 	desc += sprintf(buff+desc, "fixed rate 0x%X\n",
 			lq_sta->dbg_fixed_rate);
 	desc += sprintf(buff+desc, "valid_tx_ant %s%s%s\n",
-	    (iwl_fw_valid_tx_ant(mvm->fw) & ANT_A) ? "ANT_A," : "",
-	    (iwl_fw_valid_tx_ant(mvm->fw) & ANT_B) ? "ANT_B," : "",
-	    (iwl_fw_valid_tx_ant(mvm->fw) & ANT_C) ? "ANT_C" : "");
+	    (mvm->fw->valid_tx_ant & ANT_A) ? "ANT_A," : "",
+	    (mvm->fw->valid_tx_ant & ANT_B) ? "ANT_B," : "",
+	    (mvm->fw->valid_tx_ant & ANT_C) ? "ANT_C" : "");
 	desc += sprintf(buff+desc, "lq type %s\n",
 			(is_legacy(rate)) ? "legacy" :
 			is_vht(rate) ? "VHT" : "HT");
diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c
index bf4e773c6f46..cea935b9afa6 100644
--- a/drivers/net/wireless/iwlwifi/mvm/scan.c
+++ b/drivers/net/wireless/iwlwifi/mvm/scan.c
@@ -82,7 +82,7 @@ static inline __le16 iwl_mvm_scan_rx_chain(struct iwl_mvm *mvm)
 	if (mvm->scan_rx_ant != ANT_NONE)
 		rx_ant = mvm->scan_rx_ant;
 	else
-		rx_ant = iwl_fw_valid_rx_ant(mvm->fw);
+		rx_ant = mvm->fw->valid_rx_ant;
 	rx_chain = rx_ant << PHY_RX_CHAIN_VALID_POS;
 	rx_chain |= rx_ant << PHY_RX_CHAIN_FORCE_MIMO_SEL_POS;
 	rx_chain |= rx_ant << PHY_RX_CHAIN_FORCE_SEL_POS;
@@ -124,7 +124,7 @@ iwl_mvm_scan_rate_n_flags(struct iwl_mvm *mvm, enum ieee80211_band band,
 	u32 tx_ant;
 
 	mvm->scan_last_antenna_idx =
-		iwl_mvm_next_antenna(mvm, iwl_fw_valid_tx_ant(mvm->fw),
+		iwl_mvm_next_antenna(mvm, mvm->fw->valid_tx_ant,
 				     mvm->scan_last_antenna_idx);
 	tx_ant = BIT(mvm->scan_last_antenna_idx) << RATE_MCS_ANT_POS;
 
diff --git a/drivers/net/wireless/iwlwifi/mvm/tx.c b/drivers/net/wireless/iwlwifi/mvm/tx.c
index 852d9d87a14c..b83ef6ad1242 100644
--- a/drivers/net/wireless/iwlwifi/mvm/tx.c
+++ b/drivers/net/wireless/iwlwifi/mvm/tx.c
@@ -207,7 +207,7 @@ static void iwl_mvm_set_tx_cmd_rate(struct iwl_mvm *mvm,
 	rate_plcp = iwl_mvm_mac80211_idx_to_hwrate(rate_idx);
 
 	mvm->mgmt_last_antenna_idx =
-		iwl_mvm_next_antenna(mvm, iwl_fw_valid_tx_ant(mvm->fw),
+		iwl_mvm_next_antenna(mvm, mvm->fw->valid_tx_ant,
 				     mvm->mgmt_last_antenna_idx);
 	rate_flags = BIT(mvm->mgmt_last_antenna_idx) << RATE_MCS_ANT_POS;
 
diff --git a/drivers/net/wireless/iwlwifi/mvm/utils.c b/drivers/net/wireless/iwlwifi/mvm/utils.c
index 2021b57189bc..c81a7fb6276c 100644
--- a/drivers/net/wireless/iwlwifi/mvm/utils.c
+++ b/drivers/net/wireless/iwlwifi/mvm/utils.c
@@ -587,7 +587,7 @@ void iwl_mvm_update_smps(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
 	lockdep_assert_held(&mvm->mutex);
 
 	/* SMPS is irrelevant for NICs that don't have at least 2 RX antenna */
-	if (num_of_ant(iwl_fw_valid_rx_ant(mvm->fw)) == 1)
+	if (num_of_ant(mvm->fw->valid_rx_ant) == 1)
 		return;
 
 	if (vif->type == NL80211_IFTYPE_AP)
-- 
cgit v1.2.2


From ffa702647c0ed534be042542d492f4ed94d178f8 Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Tue, 11 Feb 2014 16:37:34 +0200
Subject: iwlwifi: mvm: don't dump log of second CPU when not relevant

The new API for ALIVE notification was misunderstood.

Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/fw.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/fw.c b/drivers/net/wireless/iwlwifi/mvm/fw.c
index 4f398e63f44a..979b35bae056 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw.c
+++ b/drivers/net/wireless/iwlwifi/mvm/fw.c
@@ -130,7 +130,6 @@ static bool iwl_alive_fn(struct iwl_notif_wait_data *notif_wait,
 	} else {
 		palive2 = (void *)pkt->data;
 
-		mvm->support_umac_log = true;
 		mvm->error_event_table =
 			le32_to_cpu(palive2->error_event_table_ptr);
 		mvm->log_event_table =
@@ -141,6 +140,9 @@ static bool iwl_alive_fn(struct iwl_notif_wait_data *notif_wait,
 
 		alive_data->valid = le16_to_cpu(palive2->status) ==
 				    IWL_ALIVE_STATUS_OK;
+		if (mvm->umac_error_event_table)
+			mvm->support_umac_log = true;
+
 		IWL_DEBUG_FW(mvm,
 			     "Alive VER2 ucode status 0x%04x revision 0x%01X 0x%01X flags 0x%01X\n",
 			     le16_to_cpu(palive2->status), palive2->ver_type,
-- 
cgit v1.2.2


From 2c34752ad965d8628db050a1f66ac774f692edcd Mon Sep 17 00:00:00 2001
From: Ben Greear <greearb@candelatech.com>
Date: Wed, 5 Feb 2014 13:58:32 -0800
Subject: ath10k: print out size of wmi-ready-event message

Show message length and expected length.  Helps debug
firmware mismatch issues.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/wmi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 7298c0677b0b..b3c5a1faad43 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -2071,11 +2071,11 @@ static int ath10k_wmi_ready_event_rx(struct ath10k *ar, struct sk_buff *skb)
 	memcpy(ar->mac_addr, ev->mac_addr.addr, ETH_ALEN);
 
 	ath10k_dbg(ATH10K_DBG_WMI,
-		   "wmi event ready sw_version %u abi_version %u mac_addr %pM status %d\n",
+		   "wmi event ready sw_version %u abi_version %u mac_addr %pM status %d skb->len %i ev-sz %zu\n",
 		   __le32_to_cpu(ev->sw_version),
 		   __le32_to_cpu(ev->abi_version),
 		   ev->mac_addr.addr,
-		   __le32_to_cpu(ev->status));
+		   __le32_to_cpu(ev->status), skb->len, sizeof(*ev));
 
 	complete(&ar->wmi.unified_ready);
 	return 0;
-- 
cgit v1.2.2


From c6b56b03a7e8b1148e52b1175fde16a1ecc8ac4a Mon Sep 17 00:00:00 2001
From: Ben Greear <greearb@candelatech.com>
Date: Wed, 5 Feb 2014 13:58:33 -0800
Subject: ath10k: add more debugging for receive errors

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/htt_rx.c | 11 +++++++++++
 drivers/net/wireless/ath/ath10k/txrx.c   |  4 ++--
 2 files changed, 13 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index fe8bd1b59f0e..6a548a25bda6 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -937,6 +937,8 @@ static void ath10k_htt_rx_handler(struct ath10k_htt *htt,
 			}
 
 			if (ath10k_htt_rx_has_decrypt_err(msdu_head)) {
+				ath10k_dbg(ATH10K_DBG_HTT,
+					   "htt rx dropping due to decrypt-err\n");
 				ath10k_htt_rx_free_msdu_chain(msdu_head);
 				continue;
 			}
@@ -975,6 +977,15 @@ static void ath10k_htt_rx_handler(struct ath10k_htt *htt,
 			info.skb     = msdu_head;
 			info.fcs_err = ath10k_htt_rx_has_fcs_err(msdu_head);
 			info.mic_err = ath10k_htt_rx_has_mic_err(msdu_head);
+
+			if (info.fcs_err)
+				ath10k_dbg(ATH10K_DBG_HTT,
+					   "htt rx has FCS err\n");
+
+			if (info.mic_err)
+				ath10k_dbg(ATH10K_DBG_HTT,
+					   "htt rx has MIC err\n");
+
 			info.signal  = ATH10K_DEFAULT_NOISE_FLOOR;
 			info.signal += rx->ppdu.combined_rssi;
 
diff --git a/drivers/net/wireless/ath/ath10k/txrx.c b/drivers/net/wireless/ath/ath10k/txrx.c
index 74f45fa6f428..b11e478e2e8f 100644
--- a/drivers/net/wireless/ath/ath10k/txrx.c
+++ b/drivers/net/wireless/ath/ath10k/txrx.c
@@ -259,7 +259,7 @@ void ath10k_process_rx(struct ath10k *ar, struct htt_rx_info *info)
 	status->freq = ch->center_freq;
 
 	ath10k_dbg(ATH10K_DBG_DATA,
-		   "rx skb %p len %u %s%s%s%s%s %srate_idx %u vht_nss %u freq %u band %u\n",
+		   "rx skb %p len %u %s%s%s%s%s %srate_idx %u vht_nss %u freq %u band %u flag 0x%x fcs-err %i\n",
 		   info->skb,
 		   info->skb->len,
 		   status->flag == 0 ? "legacy" : "",
@@ -271,7 +271,7 @@ void ath10k_process_rx(struct ath10k *ar, struct htt_rx_info *info)
 		   status->rate_idx,
 		   status->vht_nss,
 		   status->freq,
-		   status->band);
+		   status->band, status->flag, info->fcs_err);
 	ath10k_dbg_dump(ATH10K_DBG_HTT_DUMP, NULL, "rx skb: ",
 			info->skb->data, info->skb->len);
 
-- 
cgit v1.2.2


From 75fb2f94f2115a616c6066b55c35495482514608 Mon Sep 17 00:00:00 2001
From: Ben Greear <greearb@candelatech.com>
Date: Wed, 5 Feb 2014 13:58:34 -0800
Subject: ath10k: better tx/rx debugging

Make it easier to grep for htt rx errors.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/htt_rx.c | 17 ++++++++++-------
 drivers/net/wireless/ath/ath10k/htt_tx.c |  4 ++--
 2 files changed, 12 insertions(+), 9 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index 6a548a25bda6..5d073d9afbbf 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -324,7 +324,7 @@ static int ath10k_htt_rx_amsdu_pop(struct ath10k_htt *htt,
 				 msdu->len + skb_tailroom(msdu),
 				 DMA_FROM_DEVICE);
 
-		ath10k_dbg_dump(ATH10K_DBG_HTT_DUMP, NULL, "htt rx: ",
+		ath10k_dbg_dump(ATH10K_DBG_HTT_DUMP, NULL, "htt rx pop: ",
 				msdu->data, msdu->len + skb_tailroom(msdu));
 
 		rx_desc = (struct htt_rx_desc *)msdu->data;
@@ -417,8 +417,8 @@ static int ath10k_htt_rx_amsdu_pop(struct ath10k_htt *htt,
 					 next->len + skb_tailroom(next),
 					 DMA_FROM_DEVICE);
 
-			ath10k_dbg_dump(ATH10K_DBG_HTT_DUMP, NULL, "htt rx: ",
-					next->data,
+			ath10k_dbg_dump(ATH10K_DBG_HTT_DUMP, NULL,
+					"htt rx chained: ", next->data,
 					next->len + skb_tailroom(next));
 
 			skb_trim(next, 0);
@@ -751,7 +751,7 @@ static void ath10k_htt_rx_msdu(struct ath10k_htt *htt, struct htt_rx_info *info)
 
 	/* This shouldn't happen. If it does than it may be a FW bug. */
 	if (skb->next) {
-		ath10k_warn("received chained non A-MSDU frame\n");
+		ath10k_warn("htt rx received chained non A-MSDU frame\n");
 		ath10k_htt_rx_free_msdu_chain(skb->next);
 		skb->next = NULL;
 	}
@@ -947,6 +947,7 @@ static void ath10k_htt_rx_handler(struct ath10k_htt *htt,
 
 			/* Skip mgmt frames while we handle this in WMI */
 			if (status == HTT_RX_IND_MPDU_STATUS_MGMT_CTRL) {
+				ath10k_dbg(ATH10K_DBG_HTT, "htt rx mgmt ctrl\n");
 				ath10k_htt_rx_free_msdu_chain(msdu_head);
 				continue;
 			}
@@ -962,6 +963,8 @@ static void ath10k_htt_rx_handler(struct ath10k_htt *htt,
 			}
 
 			if (test_bit(ATH10K_CAC_RUNNING, &htt->ar->dev_flags)) {
+				ath10k_dbg(ATH10K_DBG_HTT,
+					   "htt rx CAC running\n");
 				ath10k_htt_rx_free_msdu_chain(msdu_head);
 				continue;
 			}
@@ -969,7 +972,7 @@ static void ath10k_htt_rx_handler(struct ath10k_htt *htt,
 			/* FIXME: we do not support chaining yet.
 			 * this needs investigation */
 			if (msdu_chaining) {
-				ath10k_warn("msdu_chaining is true\n");
+				ath10k_warn("htt rx msdu_chaining is true\n");
 				ath10k_htt_rx_free_msdu_chain(msdu_head);
 				continue;
 			}
@@ -1106,7 +1109,7 @@ static void ath10k_htt_rx_frag_handler(struct ath10k_htt *htt,
 
 	skb_trim(info.skb, info.skb->len - trim);
 
-	ath10k_dbg_dump(ATH10K_DBG_HTT_DUMP, NULL, "htt frag mpdu: ",
+	ath10k_dbg_dump(ATH10K_DBG_HTT_DUMP, NULL, "htt rx frag mpdu: ",
 			info.skb->data, info.skb->len);
 	ath10k_process_rx(htt->ar, &info);
 
@@ -1127,7 +1130,7 @@ void ath10k_htt_t2h_msg_handler(struct ath10k *ar, struct sk_buff *skb)
 	if (!IS_ALIGNED((unsigned long)skb->data, 4))
 		ath10k_warn("unaligned htt message, expect trouble\n");
 
-	ath10k_dbg(ATH10K_DBG_HTT, "HTT RX, msg_type: 0x%0X\n",
+	ath10k_dbg(ATH10K_DBG_HTT, "htt rx, msg_type: 0x%0X\n",
 		   resp->hdr.msg_type);
 	switch (resp->hdr.msg_type) {
 	case HTT_T2H_MSG_TYPE_VERSION_CONF: {
diff --git a/drivers/net/wireless/ath/ath10k/htt_tx.c b/drivers/net/wireless/ath/ath10k/htt_tx.c
index f1d36d2d2723..acaa046dc93b 100644
--- a/drivers/net/wireless/ath/ath10k/htt_tx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_tx.c
@@ -460,9 +460,9 @@ int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *msdu)
 					   DMA_TO_DEVICE);
 	}
 
-	ath10k_dbg(ATH10K_DBG_HTT, "msdu 0x%llx\n",
+	ath10k_dbg(ATH10K_DBG_HTT, "tx-msdu 0x%llx\n",
 		   (unsigned long long) ATH10K_SKB_CB(msdu)->paddr);
-	ath10k_dbg_dump(ATH10K_DBG_HTT_DUMP, NULL, "msdu: ",
+	ath10k_dbg_dump(ATH10K_DBG_HTT_DUMP, NULL, "tx-msdu: ",
 			msdu->data, msdu->len);
 
 	skb_put(txdesc, desc_len);
-- 
cgit v1.2.2


From 7c61385454b639a68e434496c1cae9ec4d98d99e Mon Sep 17 00:00:00 2001
From: Bartosz Markowski <bartosz.markowski@tieto.com>
Date: Tue, 11 Feb 2014 08:37:06 +0100
Subject: ath10k: remove excessive rx msdu len check

This throw a lot of pointless warnings in case of DFS (radar
detection) and PHYERR events from firmware, when firmware may
actually insert more data, than we assume.

Besides of being noisy this debug does not protect or check
anything usefull currently. It was introduced long time ago
while debugging aggregations. So just removing it.

Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/htt_rx.c | 6 ------
 1 file changed, 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index 5d073d9afbbf..820c8ba3b1ec 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -430,12 +430,6 @@ static int ath10k_htt_rx_amsdu_pop(struct ath10k_htt *htt,
 			msdu_chaining = 1;
 		}
 
-		if (msdu_len > 0) {
-			/* This may suggest FW bug? */
-			ath10k_warn("htt rx msdu len not consumed (%d)\n",
-				    msdu_len);
-		}
-
 		last_msdu = __le32_to_cpu(rx_desc->msdu_end.info0) &
 				RX_MSDU_END_INFO0_LAST_MSDU;
 
-- 
cgit v1.2.2


From 36786024df993f0fb5e7d1b56058c4f48f24d5e8 Mon Sep 17 00:00:00 2001
From: Marek Kwaczynski <marek.kwaczynski@tieto.com>
Date: Mon, 10 Feb 2014 11:25:25 +0100
Subject: ath10k: Set proper nss value for the peer

It was found during testing the nss calculation does not
cover all corner cases. Station could request eq. only MCS8
and MCS9 (nss=2 specific). Next num_rates=2 so the driver
sets nss=(max((2+7)/8, 1))=1. Which is wrong. The in-driver
calculation was introduced prior (commit ddcc347b70
mac80211: fix rx_nss calculation for drivers with hw rc).
Since it's fixed, use mac80211 provided value from now.
End user will experience lower throuhputs than expected
if the nss is wrongly calculated.

Signed-off-by: Marek Kwaczynski <marek.kwaczynski@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/mac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 144b4d605267..e6bf2e8da770 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -1149,7 +1149,7 @@ static void ath10k_peer_assoc_h_ht(struct ath10k *ar,
 			arg->peer_ht_rates.rates[n++] = i;
 
 	arg->peer_ht_rates.num_rates = n;
-	arg->peer_num_spatial_streams = max((n+7) / 8, 1);
+	arg->peer_num_spatial_streams = sta->rx_nss;
 
 	ath10k_dbg(ATH10K_DBG_MAC, "mac ht peer %pM mcs cnt %d nss %d\n",
 		   arg->addr,
-- 
cgit v1.2.2


From fc36e3ffcdd0ef214008d459bf8d8bff159ce16f Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Mon, 10 Feb 2014 17:14:22 +0100
Subject: ath10k: fix device initialization routine

Hardware CUS232 version 2 has some issues with cold
reset that lead to Data Bus Errors or system hangs
in some cases. It's safer to use warm reset when
possible as it shouldn't trigger the
aforementioned issues.

Prefer warm reset over cold reset. However since
warm reset doesn't work after FW crash make sure to
fallback to cold reset when booting up the HW.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Marek Puzyniak <marek.puzyniak@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/hw.h  |   6 ++
 drivers/net/wireless/ath/ath10k/pci.c | 134 ++++++++++++++++++++++++++++++++--
 2 files changed, 133 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index f1505a25d810..35fc44e281f5 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -205,8 +205,11 @@ enum ath10k_mcast2ucast_mode {
 #define WLAN_ANALOG_INTF_PCIE_BASE_ADDRESS	0x0006c000
 #define PCIE_LOCAL_BASE_ADDRESS			0x00080000
 
+#define SOC_RESET_CONTROL_ADDRESS		0x00000000
 #define SOC_RESET_CONTROL_OFFSET		0x00000000
 #define SOC_RESET_CONTROL_SI0_RST_MASK		0x00000001
+#define SOC_RESET_CONTROL_CE_RST_MASK		0x00040000
+#define SOC_RESET_CONTROL_CPU_WARM_RST_MASK	0x00000040
 #define SOC_CPU_CLOCK_OFFSET			0x00000020
 #define SOC_CPU_CLOCK_STANDARD_LSB		0
 #define SOC_CPU_CLOCK_STANDARD_MASK		0x00000003
@@ -216,6 +219,8 @@ enum ath10k_mcast2ucast_mode {
 #define SOC_LPO_CAL_OFFSET			0x000000e0
 #define SOC_LPO_CAL_ENABLE_LSB			20
 #define SOC_LPO_CAL_ENABLE_MASK			0x00100000
+#define SOC_LF_TIMER_CONTROL0_ADDRESS		0x00000050
+#define SOC_LF_TIMER_CONTROL0_ENABLE_MASK	0x00000004
 
 #define SOC_CHIP_ID_ADDRESS			0x000000ec
 #define SOC_CHIP_ID_REV_LSB			8
@@ -273,6 +278,7 @@ enum ath10k_mcast2ucast_mode {
 #define PCIE_INTR_CAUSE_ADDRESS			0x000c
 #define PCIE_INTR_CLR_ADDRESS			0x0014
 #define SCRATCH_3_ADDRESS			0x0030
+#define CPU_INTR_ADDRESS			0x0010
 
 /* Firmware indications to the Host via SCRATCH_3 register. */
 #define FW_INDICATOR_ADDRESS	(SOC_CORE_BASE_ADDRESS + SCRATCH_3_ADDRESS)
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 9179c88007d1..486412b9fec2 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -64,7 +64,8 @@ static int ath10k_pci_post_rx_pipe(struct ath10k_pci_pipe *pipe_info,
 					     int num);
 static void ath10k_pci_rx_pipe_cleanup(struct ath10k_pci_pipe *pipe_info);
 static void ath10k_pci_stop_ce(struct ath10k *ar);
-static int ath10k_pci_device_reset(struct ath10k *ar);
+static int ath10k_pci_cold_reset(struct ath10k *ar);
+static int ath10k_pci_warm_reset(struct ath10k *ar);
 static int ath10k_pci_wait_for_target_init(struct ath10k *ar);
 static int ath10k_pci_init_irq(struct ath10k *ar);
 static int ath10k_pci_deinit_irq(struct ath10k *ar);
@@ -1500,7 +1501,7 @@ static void ath10k_pci_hif_stop(struct ath10k *ar)
 	 * configuration during init. If ringbuffers are freed and the device
 	 * were to access them this could lead to memory corruption on the
 	 * host. */
-	ath10k_pci_device_reset(ar);
+	ath10k_pci_warm_reset(ar);
 
 	ar_pci->started = 0;
 }
@@ -1991,7 +1992,94 @@ static void ath10k_pci_fw_interrupt_handler(struct ath10k *ar)
 	ath10k_pci_sleep(ar);
 }
 
-static int ath10k_pci_hif_power_up(struct ath10k *ar)
+static int ath10k_pci_warm_reset(struct ath10k *ar)
+{
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+	int ret = 0;
+	u32 val;
+
+	ath10k_dbg(ATH10K_DBG_BOOT, "boot performing warm chip reset\n");
+
+	ret = ath10k_do_pci_wake(ar);
+	if (ret) {
+		ath10k_err("failed to wake up target: %d\n", ret);
+		return ret;
+	}
+
+	/* debug */
+	val = ath10k_pci_read32(ar, SOC_CORE_BASE_ADDRESS +
+				PCIE_INTR_CAUSE_ADDRESS);
+	ath10k_dbg(ATH10K_DBG_BOOT, "boot host cpu intr cause: 0x%08x\n", val);
+
+	val = ath10k_pci_read32(ar, SOC_CORE_BASE_ADDRESS +
+				CPU_INTR_ADDRESS);
+	ath10k_dbg(ATH10K_DBG_BOOT, "boot target cpu intr cause: 0x%08x\n",
+		   val);
+
+	/* disable pending irqs */
+	ath10k_pci_write32(ar, SOC_CORE_BASE_ADDRESS +
+			   PCIE_INTR_ENABLE_ADDRESS, 0);
+
+	ath10k_pci_write32(ar, SOC_CORE_BASE_ADDRESS +
+			   PCIE_INTR_CLR_ADDRESS, ~0);
+
+	msleep(100);
+
+	/* clear fw indicator */
+	ath10k_pci_write32(ar, ar_pci->fw_indicator_address, 0);
+
+	/* clear target LF timer interrupts */
+	val = ath10k_pci_read32(ar, RTC_SOC_BASE_ADDRESS +
+				SOC_LF_TIMER_CONTROL0_ADDRESS);
+	ath10k_pci_write32(ar, RTC_SOC_BASE_ADDRESS +
+			   SOC_LF_TIMER_CONTROL0_ADDRESS,
+			   val & ~SOC_LF_TIMER_CONTROL0_ENABLE_MASK);
+
+	/* reset CE */
+	val = ath10k_pci_read32(ar, RTC_SOC_BASE_ADDRESS +
+				SOC_RESET_CONTROL_ADDRESS);
+	ath10k_pci_write32(ar, RTC_SOC_BASE_ADDRESS + SOC_RESET_CONTROL_ADDRESS,
+			   val | SOC_RESET_CONTROL_CE_RST_MASK);
+	val = ath10k_pci_read32(ar, RTC_SOC_BASE_ADDRESS +
+				SOC_RESET_CONTROL_ADDRESS);
+	msleep(10);
+
+	/* unreset CE */
+	ath10k_pci_write32(ar, RTC_SOC_BASE_ADDRESS + SOC_RESET_CONTROL_ADDRESS,
+			   val & ~SOC_RESET_CONTROL_CE_RST_MASK);
+	val = ath10k_pci_read32(ar, RTC_SOC_BASE_ADDRESS +
+				SOC_RESET_CONTROL_ADDRESS);
+	msleep(10);
+
+	/* debug */
+	val = ath10k_pci_read32(ar, SOC_CORE_BASE_ADDRESS +
+				PCIE_INTR_CAUSE_ADDRESS);
+	ath10k_dbg(ATH10K_DBG_BOOT, "boot host cpu intr cause: 0x%08x\n", val);
+
+	val = ath10k_pci_read32(ar, SOC_CORE_BASE_ADDRESS +
+				CPU_INTR_ADDRESS);
+	ath10k_dbg(ATH10K_DBG_BOOT, "boot target cpu intr cause: 0x%08x\n",
+		   val);
+
+	/* CPU warm reset */
+	val = ath10k_pci_read32(ar, RTC_SOC_BASE_ADDRESS +
+				SOC_RESET_CONTROL_ADDRESS);
+	ath10k_pci_write32(ar, RTC_SOC_BASE_ADDRESS + SOC_RESET_CONTROL_ADDRESS,
+			   val | SOC_RESET_CONTROL_CPU_WARM_RST_MASK);
+
+	val = ath10k_pci_read32(ar, RTC_SOC_BASE_ADDRESS +
+				SOC_RESET_CONTROL_ADDRESS);
+	ath10k_dbg(ATH10K_DBG_BOOT, "boot target reset state: 0x%08x\n", val);
+
+	msleep(100);
+
+	ath10k_dbg(ATH10K_DBG_BOOT, "boot warm reset complete\n");
+
+	ath10k_do_pci_sleep(ar);
+	return ret;
+}
+
+static int __ath10k_pci_hif_power_up(struct ath10k *ar, bool cold_reset)
 {
 	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
 	const char *irq_mode;
@@ -2007,7 +2095,11 @@ static int ath10k_pci_hif_power_up(struct ath10k *ar)
 	 * is in an unexpected state. We try to catch that here in order to
 	 * reset the Target and retry the probe.
 	 */
-	ret = ath10k_pci_device_reset(ar);
+	if (cold_reset)
+		ret = ath10k_pci_cold_reset(ar);
+	else
+		ret = ath10k_pci_warm_reset(ar);
+
 	if (ret) {
 		ath10k_err("failed to reset target: %d\n", ret);
 		goto err;
@@ -2077,7 +2169,7 @@ err_deinit_irq:
 	ath10k_pci_deinit_irq(ar);
 err_ce:
 	ath10k_pci_ce_deinit(ar);
-	ath10k_pci_device_reset(ar);
+	ath10k_pci_warm_reset(ar);
 err_ps:
 	if (!test_bit(ATH10K_PCI_FEATURE_SOC_POWER_SAVE, ar_pci->features))
 		ath10k_do_pci_sleep(ar);
@@ -2085,6 +2177,34 @@ err:
 	return ret;
 }
 
+static int ath10k_pci_hif_power_up(struct ath10k *ar)
+{
+	int ret;
+
+	/*
+	 * Hardware CUS232 version 2 has some issues with cold reset and the
+	 * preferred (and safer) way to perform a device reset is through a
+	 * warm reset.
+	 *
+	 * Warm reset doesn't always work though (notably after a firmware
+	 * crash) so fall back to cold reset if necessary.
+	 */
+	ret = __ath10k_pci_hif_power_up(ar, false);
+	if (ret) {
+		ath10k_warn("failed to power up target using warm reset (%d), trying cold reset\n",
+			    ret);
+
+		ret = __ath10k_pci_hif_power_up(ar, true);
+		if (ret) {
+			ath10k_err("failed to power up target using cold reset too (%d)\n",
+				   ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
 static void ath10k_pci_hif_power_down(struct ath10k *ar)
 {
 	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
@@ -2092,7 +2212,7 @@ static void ath10k_pci_hif_power_down(struct ath10k *ar)
 	ath10k_pci_free_early_irq(ar);
 	ath10k_pci_kill_tasklet(ar);
 	ath10k_pci_deinit_irq(ar);
-	ath10k_pci_device_reset(ar);
+	ath10k_pci_warm_reset(ar);
 
 	ath10k_pci_ce_deinit(ar);
 	if (!test_bit(ATH10K_PCI_FEATURE_SOC_POWER_SAVE, ar_pci->features))
@@ -2521,7 +2641,7 @@ out:
 	return ret;
 }
 
-static int ath10k_pci_device_reset(struct ath10k *ar)
+static int ath10k_pci_cold_reset(struct ath10k *ar)
 {
 	int i, ret;
 	u32 val;
-- 
cgit v1.2.2


From 9042e17df8340247ebed9c67f4b64228f16b4c36 Mon Sep 17 00:00:00 2001
From: Marek Puzyniak <marek.puzyniak@tieto.com>
Date: Mon, 10 Feb 2014 17:14:23 +0100
Subject: ath10k: refactor suspend/resume functions

Suspend/resume callbacks are not protected by configuration mutex
so adding such protection. Also in order to simplify implemetation
of suspend function wait queue is replaced by completion.

Signed-off-by: Marek Puzyniak <marek.puzyniak@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/core.c |  6 ++----
 drivers/net/wireless/ath/ath10k/core.h |  3 +--
 drivers/net/wireless/ath/ath10k/mac.c  | 39 ++++++++++++++++++++++------------
 3 files changed, 28 insertions(+), 20 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 56048b1bbca5..0d161cf90608 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -55,8 +55,7 @@ static void ath10k_send_suspend_complete(struct ath10k *ar)
 {
 	ath10k_dbg(ATH10K_DBG_BOOT, "boot suspend complete\n");
 
-	ar->is_target_paused = true;
-	wake_up(&ar->event_queue);
+	complete(&ar->target_suspend);
 }
 
 static int ath10k_init_connect_htc(struct ath10k *ar)
@@ -703,6 +702,7 @@ struct ath10k *ath10k_core_create(void *hif_priv, struct device *dev,
 	init_completion(&ar->scan.started);
 	init_completion(&ar->scan.completed);
 	init_completion(&ar->scan.on_channel);
+	init_completion(&ar->target_suspend);
 
 	init_completion(&ar->install_key_done);
 	init_completion(&ar->vdev_setup_done);
@@ -726,8 +726,6 @@ struct ath10k *ath10k_core_create(void *hif_priv, struct device *dev,
 	INIT_WORK(&ar->wmi_mgmt_tx_work, ath10k_mgmt_over_wmi_tx_work);
 	skb_queue_head_init(&ar->wmi_mgmt_tx_queue);
 
-	init_waitqueue_head(&ar->event_queue);
-
 	INIT_WORK(&ar->restart_work, ath10k_core_restart);
 
 	return ar;
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index c0b00e1f7562..4f7ff9bd7813 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -375,8 +375,7 @@ struct ath10k {
 		const struct ath10k_hif_ops *ops;
 	} hif;
 
-	wait_queue_head_t event_queue;
-	bool is_target_paused;
+	struct completion target_suspend;
 
 	struct ath10k_bmi bmi;
 	struct ath10k_wmi wmi;
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index e6bf2e8da770..3d905932b5a2 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -3440,21 +3440,20 @@ static int ath10k_suspend(struct ieee80211_hw *hw,
 	struct ath10k *ar = hw->priv;
 	int ret;
 
-	ar->is_target_paused = false;
+	mutex_lock(&ar->conf_mutex);
+
+	reinit_completion(&ar->target_suspend);
 
 	ret = ath10k_wmi_pdev_suspend_target(ar);
 	if (ret) {
 		ath10k_warn("could not suspend target (%d)\n", ret);
-		return 1;
+		ret = 1;
+		goto exit;
 	}
 
-	ret = wait_event_interruptible_timeout(ar->event_queue,
-					       ar->is_target_paused == true,
-					       1 * HZ);
-	if (ret < 0) {
-		ath10k_warn("suspend interrupted (%d)\n", ret);
-		goto resume;
-	} else if (ret == 0) {
+	ret = wait_for_completion_timeout(&ar->target_suspend, 1 * HZ);
+
+	if (ret == 0) {
 		ath10k_warn("suspend timed out - target pause event never came\n");
 		goto resume;
 	}
@@ -3465,12 +3464,17 @@ static int ath10k_suspend(struct ieee80211_hw *hw,
 		goto resume;
 	}
 
-	return 0;
+	ret = 0;
+	goto exit;
 resume:
 	ret = ath10k_wmi_pdev_resume_target(ar);
 	if (ret)
 		ath10k_warn("could not resume target (%d)\n", ret);
-	return 1;
+
+	ret = 1;
+exit:
+	mutex_unlock(&ar->conf_mutex);
+	return ret;
 }
 
 static int ath10k_resume(struct ieee80211_hw *hw)
@@ -3478,19 +3482,26 @@ static int ath10k_resume(struct ieee80211_hw *hw)
 	struct ath10k *ar = hw->priv;
 	int ret;
 
+	mutex_lock(&ar->conf_mutex);
+
 	ret = ath10k_hif_resume(ar);
 	if (ret) {
 		ath10k_warn("could not resume hif (%d)\n", ret);
-		return 1;
+		ret = 1;
+		goto exit;
 	}
 
 	ret = ath10k_wmi_pdev_resume_target(ar);
 	if (ret) {
 		ath10k_warn("could not resume target (%d)\n", ret);
-		return 1;
+		ret = 1;
+		goto exit;
 	}
 
-	return 0;
+	ret = 0;
+exit:
+	mutex_unlock(&ar->conf_mutex);
+	return ret;
 }
 #endif
 
-- 
cgit v1.2.2


From 00f5482bcd940c11b9b81e7c399fd5f4f6667bd0 Mon Sep 17 00:00:00 2001
From: Marek Puzyniak <marek.puzyniak@tieto.com>
Date: Mon, 10 Feb 2014 17:14:24 +0100
Subject: ath10k: suspend hardware before reset

In case of warm reset target need to be suspended.
Suspend function is extented to handle both cases
with disabling interrupts and without disabling interrupts.
Warm target reset requires suspend with all interrupts
disabled.

This patch depends on
ath10k: fix device initialization routine

Signed-off-by: Marek Puzyniak <marek.puzyniak@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/core.c | 24 ++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/core.h |  1 +
 drivers/net/wireless/ath/ath10k/mac.c  | 14 +++-----------
 drivers/net/wireless/ath/ath10k/wmi.c  |  4 ++--
 drivers/net/wireless/ath/ath10k/wmi.h  |  2 +-
 5 files changed, 31 insertions(+), 14 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 0d161cf90608..ebc5fc2ede75 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -858,10 +858,34 @@ err:
 }
 EXPORT_SYMBOL(ath10k_core_start);
 
+int ath10k_wait_for_suspend(struct ath10k *ar, u32 suspend_opt)
+{
+	int ret;
+
+	reinit_completion(&ar->target_suspend);
+
+	ret = ath10k_wmi_pdev_suspend_target(ar, suspend_opt);
+	if (ret) {
+		ath10k_warn("could not suspend target (%d)\n", ret);
+		return ret;
+	}
+
+	ret = wait_for_completion_timeout(&ar->target_suspend, 1 * HZ);
+
+	if (ret == 0) {
+		ath10k_warn("suspend timed out - target pause event never came\n");
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
 void ath10k_core_stop(struct ath10k *ar)
 {
 	lockdep_assert_held(&ar->conf_mutex);
 
+	/* try to suspend target */
+	ath10k_wait_for_suspend(ar, WMI_PDEV_SUSPEND_AND_DISABLE_INTR);
 	ath10k_debug_stop(ar);
 	ath10k_htc_stop(&ar->htc);
 	ath10k_htt_detach(&ar->htt);
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 4f7ff9bd7813..fae53f909550 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -492,6 +492,7 @@ struct ath10k *ath10k_core_create(void *hif_priv, struct device *dev,
 void ath10k_core_destroy(struct ath10k *ar);
 
 int ath10k_core_start(struct ath10k *ar);
+int ath10k_wait_for_suspend(struct ath10k *ar, u32 suspend_opt);
 void ath10k_core_stop(struct ath10k *ar);
 int ath10k_core_register(struct ath10k *ar, u32 chip_id);
 void ath10k_core_unregister(struct ath10k *ar);
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 3d905932b5a2..b2c65904449c 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -3442,22 +3442,14 @@ static int ath10k_suspend(struct ieee80211_hw *hw,
 
 	mutex_lock(&ar->conf_mutex);
 
-	reinit_completion(&ar->target_suspend);
-
-	ret = ath10k_wmi_pdev_suspend_target(ar);
+	ret = ath10k_wait_for_suspend(ar, WMI_PDEV_SUSPEND);
 	if (ret) {
-		ath10k_warn("could not suspend target (%d)\n", ret);
+		if (ret == -ETIMEDOUT)
+			goto resume;
 		ret = 1;
 		goto exit;
 	}
 
-	ret = wait_for_completion_timeout(&ar->target_suspend, 1 * HZ);
-
-	if (ret == 0) {
-		ath10k_warn("suspend timed out - target pause event never came\n");
-		goto resume;
-	}
-
 	ret = ath10k_hif_suspend(ar);
 	if (ret) {
 		ath10k_warn("could not suspend hif (%d)\n", ret);
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index b3c5a1faad43..91e501b5499e 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -2443,7 +2443,7 @@ int ath10k_wmi_pdev_set_channel(struct ath10k *ar,
 				   ar->wmi.cmd->pdev_set_channel_cmdid);
 }
 
-int ath10k_wmi_pdev_suspend_target(struct ath10k *ar)
+int ath10k_wmi_pdev_suspend_target(struct ath10k *ar, u32 suspend_opt)
 {
 	struct wmi_pdev_suspend_cmd *cmd;
 	struct sk_buff *skb;
@@ -2453,7 +2453,7 @@ int ath10k_wmi_pdev_suspend_target(struct ath10k *ar)
 		return -ENOMEM;
 
 	cmd = (struct wmi_pdev_suspend_cmd *)skb->data;
-	cmd->suspend_opt = WMI_PDEV_SUSPEND;
+	cmd->suspend_opt = __cpu_to_le32(suspend_opt);
 
 	return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->pdev_suspend_cmdid);
 }
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 083079f3fdd4..fc1093a51ab1 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -4193,7 +4193,7 @@ int ath10k_wmi_wait_for_unified_ready(struct ath10k *ar);
 int ath10k_wmi_connect_htc_service(struct ath10k *ar);
 int ath10k_wmi_pdev_set_channel(struct ath10k *ar,
 				const struct wmi_channel_arg *);
-int ath10k_wmi_pdev_suspend_target(struct ath10k *ar);
+int ath10k_wmi_pdev_suspend_target(struct ath10k *ar, u32 suspend_opt);
 int ath10k_wmi_pdev_resume_target(struct ath10k *ar);
 int ath10k_wmi_pdev_set_regdomain(struct ath10k *ar, u16 rd, u16 rd2g,
 				  u16 rd5g, u16 ctl2g, u16 ctl5g);
-- 
cgit v1.2.2


From fd71f807376437756bfab0ee21d5978a7b05a0f5 Mon Sep 17 00:00:00 2001
From: Bartosz Markowski <bartosz.markowski@tieto.com>
Date: Mon, 10 Feb 2014 13:12:55 +0100
Subject: ath10k: AP: handle HT station which does not have HT RX MCS

This is a workaround for HT-enabled STAs which break the spec
and have no HT capabilities RX mask (no HT RX MCS map).

As per spec, in section 20.3.5 Modulation and coding scheme (MCS),
MCS 0 through 7 are mandatory in 20MHz with 800 ns GI at all STAs.

Firmware asserts if such situation occurs.

Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/mac.c | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index b2c65904449c..1c305b10e477 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -1148,8 +1148,23 @@ static void ath10k_peer_assoc_h_ht(struct ath10k *ar,
 		if (ht_cap->mcs.rx_mask[i/8] & (1 << i%8))
 			arg->peer_ht_rates.rates[n++] = i;
 
-	arg->peer_ht_rates.num_rates = n;
-	arg->peer_num_spatial_streams = sta->rx_nss;
+	/*
+	 * This is a workaround for HT-enabled STAs which break the spec
+	 * and have no HT capabilities RX mask (no HT RX MCS map).
+	 *
+	 * As per spec, in section 20.3.5 Modulation and coding scheme (MCS),
+	 * MCS 0 through 7 are mandatory in 20MHz with 800 ns GI at all STAs.
+	 *
+	 * Firmware asserts if such situation occurs.
+	 */
+	if (n == 0) {
+		arg->peer_ht_rates.num_rates = 8;
+		for (i = 0; i < arg->peer_ht_rates.num_rates; i++)
+			arg->peer_ht_rates.rates[i] = i;
+	} else {
+		arg->peer_ht_rates.num_rates = n;
+		arg->peer_num_spatial_streams = sta->rx_nss;
+	}
 
 	ath10k_dbg(ATH10K_DBG_MAC, "mac ht peer %pM mcs cnt %d nss %d\n",
 		   arg->addr,
-- 
cgit v1.2.2


From 716ae53c56cf51a64a56aa94d60240b9dff4a112 Mon Sep 17 00:00:00 2001
From: Janusz Dziedzic <janusz.dziedzic@tieto.com>
Date: Thu, 13 Feb 2014 17:50:00 +0200
Subject: ath10k: pass frames with invalid peer status to upper layer

Pass frames with invalid peer status to upper layer.
Next mac80211 will validate frames and drop if required.
This is required to detect spurious frames and pass
this info to user mode (detect CLASS2 CLASS3 frames from
nonauthenticated/nonassociated stations).

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/htt_rx.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index 820c8ba3b1ec..4767c24bf819 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -948,6 +948,7 @@ static void ath10k_htt_rx_handler(struct ath10k_htt *htt,
 
 			if (status != HTT_RX_IND_MPDU_STATUS_OK &&
 			    status != HTT_RX_IND_MPDU_STATUS_TKIP_MIC_ERR &&
+			    status != HTT_RX_IND_MPDU_STATUS_ERR_INV_PEER &&
 			    !htt->ar->monitor_enabled) {
 				ath10k_dbg(ATH10K_DBG_HTT,
 					   "htt rx ignoring frame w/ status %d\n",
-- 
cgit v1.2.2


From bdcb2c9e2f9e40639e4b212d08d8cdba54932c0d Mon Sep 17 00:00:00 2001
From: Alexander Gordeev <agordeev@redhat.com>
Date: Thu, 13 Feb 2014 17:50:01 +0200
Subject: ath10k: Get rid of superfluous call to pci_disable_msi()

The documentation states that pci_enable_msi_block() returns the number of
requests 'could have been allocated', not 'could allocate'. IOW, MSIs are *not*
enabled if a positive value returned.

kvalo: add commit log based on Alexander's email

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/pci.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 486412b9fec2..abcb7edb6485 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -2532,8 +2532,6 @@ static int ath10k_pci_init_irq(struct ath10k *ar)
 		ret = pci_enable_msi_block(ar_pci->pdev, ar_pci->num_msi_intrs);
 		if (ret == 0)
 			return 0;
-		if (ret > 0)
-			pci_disable_msi(ar_pci->pdev);
 
 		/* fall-through */
 	}
-- 
cgit v1.2.2


From bb8b621ac34605b8e20b63021bed7d10f3dfa544 Mon Sep 17 00:00:00 2001
From: Alexander Gordeev <agordeev@redhat.com>
Date: Thu, 13 Feb 2014 17:50:01 +0200
Subject: ath10k: Disable MSI in case IRQ configuration is unknown

In case IRQ configuration is unknown possibly enabled MSIs
are left enabled in ath10k_pci_deinit_irq(). This update
fixes the described misbehaviour.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/pci.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index abcb7edb6485..4c303144c05f 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -2598,6 +2598,8 @@ static int ath10k_pci_deinit_irq(struct ath10k *ar)
 	case MSI_NUM_REQUEST:
 		pci_disable_msi(ar_pci->pdev);
 		return 0;
+	default:
+		pci_disable_msi(ar_pci->pdev);
 	}
 
 	ath10k_warn("unknown irq configuration upon deinit\n");
-- 
cgit v1.2.2


From 5ad6867cb5585cdf2cf7e70165eef93bf3820875 Mon Sep 17 00:00:00 2001
From: Alexander Gordeev <agordeev@redhat.com>
Date: Thu, 13 Feb 2014 17:50:02 +0200
Subject: ath10k: Use pci_enable_msi_range()

As result deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range() and pci_enable_msix_range()
interfaces.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/pci.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 4c303144c05f..34f09106f423 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -2529,8 +2529,9 @@ static int ath10k_pci_init_irq(struct ath10k *ar)
 	/* Try MSI-X */
 	if (ath10k_pci_irq_mode == ATH10K_PCI_IRQ_AUTO && msix_supported) {
 		ar_pci->num_msi_intrs = MSI_NUM_REQUEST;
-		ret = pci_enable_msi_block(ar_pci->pdev, ar_pci->num_msi_intrs);
-		if (ret == 0)
+		ret = pci_enable_msi_range(ar_pci->pdev, ar_pci->num_msi_intrs,
+							 ar_pci->num_msi_intrs);
+		if (ret > 0)
 			return 0;
 
 		/* fall-through */
-- 
cgit v1.2.2


From bb6bd25c08738ace7102a550a15481e70bc31ee8 Mon Sep 17 00:00:00 2001
From: ZHAO Gang <gamerh2o@gmail.com>
Date: Sat, 18 Jan 2014 00:17:39 +0800
Subject: b43: use kernel api to replace b43 specific helper function

Use ieee80211_channel_to_frequency() to replace b43_channel_to_freq_{2,5}ghz(),
and remove unused b43_freq_to_channel_{2,5}ghz().

Signed-off-by: ZHAO Gang <gamerh2o@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/main.h | 35 -----------------------------------
 drivers/net/wireless/b43/xmit.c | 12 ++++++------
 2 files changed, 6 insertions(+), 41 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/main.h b/drivers/net/wireless/b43/main.h
index abac25ee958d..f476fc337d64 100644
--- a/drivers/net/wireless/b43/main.h
+++ b/drivers/net/wireless/b43/main.h
@@ -58,41 +58,6 @@ enum b43_verbosity {
 #endif
 };
 
-
-/* Lightweight function to convert a frequency (in Mhz) to a channel number. */
-static inline u8 b43_freq_to_channel_5ghz(int freq)
-{
-	return ((freq - 5000) / 5);
-}
-static inline u8 b43_freq_to_channel_2ghz(int freq)
-{
-	u8 channel;
-
-	if (freq == 2484)
-		channel = 14;
-	else
-		channel = (freq - 2407) / 5;
-
-	return channel;
-}
-
-/* Lightweight function to convert a channel number to a frequency (in Mhz). */
-static inline int b43_channel_to_freq_5ghz(u8 channel)
-{
-	return (5000 + (5 * channel));
-}
-static inline int b43_channel_to_freq_2ghz(u8 channel)
-{
-	int freq;
-
-	if (channel == 14)
-		freq = 2484;
-	else
-		freq = 2407 + (5 * channel);
-
-	return freq;
-}
-
 static inline int b43_is_cck_rate(int rate)
 {
 	return (rate == B43_CCK_RATE_1MB ||
diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c
index 50e5ddb12fb3..218a0f37af46 100644
--- a/drivers/net/wireless/b43/xmit.c
+++ b/drivers/net/wireless/b43/xmit.c
@@ -806,7 +806,8 @@ void b43_rx(struct b43_wldev *dev, struct sk_buff *skb, const void *_rxhdr)
 		B43_WARN_ON(1);
 		/* FIXME: We don't really know which value the "chanid" contains.
 		 *        So the following assignment might be wrong. */
-		status.freq = b43_channel_to_freq_5ghz(chanid);
+		status.freq =
+			ieee80211_channel_to_frequency(chanid, status.band);
 		break;
 	case B43_PHYTYPE_G:
 		status.band = IEEE80211_BAND_2GHZ;
@@ -819,13 +820,12 @@ void b43_rx(struct b43_wldev *dev, struct sk_buff *skb, const void *_rxhdr)
 	case B43_PHYTYPE_HT:
 		/* chanid is the SHM channel cookie. Which is the plain
 		 * channel number in b43. */
-		if (chanstat & B43_RX_CHAN_5GHZ) {
+		if (chanstat & B43_RX_CHAN_5GHZ)
 			status.band = IEEE80211_BAND_5GHZ;
-			status.freq = b43_channel_to_freq_5ghz(chanid);
-		} else {
+		else
 			status.band = IEEE80211_BAND_2GHZ;
-			status.freq = b43_channel_to_freq_2ghz(chanid);
-		}
+		status.freq =
+			ieee80211_channel_to_frequency(chanid, status.band);
 		break;
 	default:
 		B43_WARN_ON(1);
-- 
cgit v1.2.2


From 02d0727ca3b0bc8194bd69cd52ddf9e4e2910890 Mon Sep 17 00:00:00 2001
From: Nadim Zubidat <nadimz@ti.com>
Date: Mon, 10 Feb 2014 13:47:17 +0200
Subject: wlcore: memset wl->rx_filter_enabled to zero after recovery

zero rx_filter_enabled array after recovery to avoid
cases were the driver will keep trying to clear a
filter which is not configured in FW.

Such case will cause consecutive recoveries due to
command execution failures.

While on it, convert rx_filter_enabled to bitmap,
to save some memory and make sparse happy (it
doesn't like sizeof(bool array)).

Signed-off-by: Nadim Zubidat <nadimz@ti.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ti/wlcore/main.c   | 1 +
 drivers/net/wireless/ti/wlcore/rx.c     | 9 ++++++---
 drivers/net/wireless/ti/wlcore/wlcore.h | 2 +-
 3 files changed, 8 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index b46b3116cc55..da268e85c3a6 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -1914,6 +1914,7 @@ static void wlcore_op_stop_locked(struct wl1271 *wl)
 	memset(wl->links_map, 0, sizeof(wl->links_map));
 	memset(wl->roc_map, 0, sizeof(wl->roc_map));
 	memset(wl->session_ids, 0, sizeof(wl->session_ids));
+	memset(wl->rx_filter_enabled, 0, sizeof(wl->rx_filter_enabled));
 	wl->active_sta_count = 0;
 	wl->active_link_count = 0;
 
diff --git a/drivers/net/wireless/ti/wlcore/rx.c b/drivers/net/wireless/ti/wlcore/rx.c
index 6791a1a6afba..94ab445fde77 100644
--- a/drivers/net/wireless/ti/wlcore/rx.c
+++ b/drivers/net/wireless/ti/wlcore/rx.c
@@ -302,7 +302,7 @@ int wl1271_rx_filter_enable(struct wl1271 *wl,
 {
 	int ret;
 
-	if (wl->rx_filter_enabled[index] == enable) {
+	if (!!test_bit(index, wl->rx_filter_enabled) == enable) {
 		wl1271_warning("Request to enable an already "
 			     "enabled rx filter %d", index);
 		return 0;
@@ -316,7 +316,10 @@ int wl1271_rx_filter_enable(struct wl1271 *wl,
 		return ret;
 	}
 
-	wl->rx_filter_enabled[index] = enable;
+	if (enable)
+		__set_bit(index, wl->rx_filter_enabled);
+	else
+		__clear_bit(index, wl->rx_filter_enabled);
 
 	return 0;
 }
@@ -326,7 +329,7 @@ int wl1271_rx_filter_clear_all(struct wl1271 *wl)
 	int i, ret = 0;
 
 	for (i = 0; i < WL1271_MAX_RX_FILTERS; i++) {
-		if (!wl->rx_filter_enabled[i])
+		if (!test_bit(i, wl->rx_filter_enabled))
 			continue;
 		ret = wl1271_rx_filter_enable(wl, i, 0, NULL);
 		if (ret)
diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h
index 06efc12a39e5..a3cc11740c88 100644
--- a/drivers/net/wireless/ti/wlcore/wlcore.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore.h
@@ -451,7 +451,7 @@ struct wl1271 {
 	size_t fw_status_priv_len;
 
 	/* RX Data filter rule state - enabled/disabled */
-	bool rx_filter_enabled[WL1271_MAX_RX_FILTERS];
+	unsigned long rx_filter_enabled[BITS_TO_LONGS(WL1271_MAX_RX_FILTERS)];
 
 	/* size of the private static data */
 	size_t static_data_priv_len;
-- 
cgit v1.2.2


From 9be86cf067f43c3a43a538189d773afc812e4017 Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Mon, 10 Feb 2014 13:47:18 +0200
Subject: wlcore: cancel Tx watchdog on suspend and rearm on first Tx after

Sometimes a tx_flush during suspend fails, but the FW manages to flush
out the packets during the time when the host is supsended. Cancel
the Tx-watchdog on suspend to not cause a spurious recovery on resume
for that case. Set a flag to reinit the watchdog on the first Tx after
resume, so we'll still recover if the FW is not empty and there's
indeed a problem.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ti/wlcore/main.c     | 13 +++++++++++++
 drivers/net/wireless/ti/wlcore/tx.c       |  9 +++++++--
 drivers/net/wireless/ti/wlcore/wlcore_i.h |  1 +
 3 files changed, 21 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index da268e85c3a6..1e191967aa26 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -1767,6 +1767,12 @@ static int wl1271_op_suspend(struct ieee80211_hw *hw,
 	flush_work(&wl->tx_work);
 	flush_delayed_work(&wl->elp_work);
 
+	/*
+	 * Cancel the watchdog even if above tx_flush failed. We will detect
+	 * it on resume anyway.
+	 */
+	cancel_delayed_work(&wl->tx_watchdog_work);
+
 	return 0;
 }
 
@@ -1824,6 +1830,13 @@ static int wl1271_op_resume(struct ieee80211_hw *hw)
 
 out:
 	wl->wow_enabled = false;
+
+	/*
+	 * Set a flag to re-init the watchdog on the first Tx after resume.
+	 * That way we avoid possible conditions where Tx-complete interrupts
+	 * fail to arrive and we perform a spurious recovery.
+	 */
+	set_bit(WL1271_FLAG_REINIT_TX_WDOG, &wl->flags);
 	mutex_unlock(&wl->mutex);
 
 	return 0;
diff --git a/drivers/net/wireless/ti/wlcore/tx.c b/drivers/net/wireless/ti/wlcore/tx.c
index 87cd707affa2..ca886efb0a57 100644
--- a/drivers/net/wireless/ti/wlcore/tx.c
+++ b/drivers/net/wireless/ti/wlcore/tx.c
@@ -234,8 +234,13 @@ static int wl1271_tx_allocate(struct wl1271 *wl, struct wl12xx_vif *wlvif,
 		wl->tx_blocks_available -= total_blocks;
 		wl->tx_allocated_blocks += total_blocks;
 
-		/* If the FW was empty before, arm the Tx watchdog */
-		if (wl->tx_allocated_blocks == total_blocks)
+		/*
+		 * If the FW was empty before, arm the Tx watchdog. Also do
+		 * this on the first Tx after resume, as we always cancel the
+		 * watchdog on suspend.
+		 */
+		if (wl->tx_allocated_blocks == total_blocks ||
+		    test_and_clear_bit(WL1271_FLAG_REINIT_TX_WDOG, &wl->flags))
 			wl12xx_rearm_tx_watchdog_locked(wl);
 
 		ac = wl1271_tx_get_queue(skb_get_queue_mapping(skb));
diff --git a/drivers/net/wireless/ti/wlcore/wlcore_i.h b/drivers/net/wireless/ti/wlcore/wlcore_i.h
index ce7261ce8b59..38153323a36b 100644
--- a/drivers/net/wireless/ti/wlcore/wlcore_i.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore_i.h
@@ -240,6 +240,7 @@ enum wl12xx_flags {
 	WL1271_FLAG_VIF_CHANGE_IN_PROGRESS,
 	WL1271_FLAG_INTENDED_FW_RECOVERY,
 	WL1271_FLAG_IO_FAILED,
+	WL1271_FLAG_REINIT_TX_WDOG,
 };
 
 enum wl12xx_vif_flags {
-- 
cgit v1.2.2


From 51ae14d0eae31a7d678c201c9664efbb373f97fa Mon Sep 17 00:00:00 2001
From: Barak Bercovitz <barak@wizery.com>
Date: Mon, 10 Feb 2014 13:47:19 +0200
Subject: wlcore: block read/writes to FW during ELP

When the chip is in ELP mode read/write to FW is invalid and may cause
the lower layers to get stuck. The reads/writes concerning ELP wakeup
are the exception here and are checked for. In addition to blocking the
IO, produce a warning.

Signed-off-by: Barak Bercovitz <barak@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ti/wlcore/io.h | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ti/wlcore/io.h b/drivers/net/wireless/ti/wlcore/io.h
index 07e3d6a049ad..0305729d0986 100644
--- a/drivers/net/wireless/ti/wlcore/io.h
+++ b/drivers/net/wireless/ti/wlcore/io.h
@@ -60,7 +60,9 @@ static inline int __must_check wlcore_raw_write(struct wl1271 *wl, int addr,
 {
 	int ret;
 
-	if (test_bit(WL1271_FLAG_IO_FAILED, &wl->flags))
+	if (test_bit(WL1271_FLAG_IO_FAILED, &wl->flags) ||
+	    WARN_ON((test_bit(WL1271_FLAG_IN_ELP, &wl->flags) &&
+		     addr != HW_ACCESS_ELP_CTRL_REG)))
 		return -EIO;
 
 	ret = wl->if_ops->write(wl->dev, addr, buf, len, fixed);
@@ -76,7 +78,9 @@ static inline int __must_check wlcore_raw_read(struct wl1271 *wl, int addr,
 {
 	int ret;
 
-	if (test_bit(WL1271_FLAG_IO_FAILED, &wl->flags))
+	if (test_bit(WL1271_FLAG_IO_FAILED, &wl->flags) ||
+	    WARN_ON((test_bit(WL1271_FLAG_IN_ELP, &wl->flags) &&
+		     addr != HW_ACCESS_ELP_CTRL_REG)))
 		return -EIO;
 
 	ret = wl->if_ops->read(wl->dev, addr, buf, len, fixed);
-- 
cgit v1.2.2


From 7a536265b0b470893c13dc0f094e3078521818e2 Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Mon, 10 Feb 2014 13:47:20 +0200
Subject: wlcore: AP: don't start mac80211 PS on non-peer HLIDs

It seems the wl18xx FW sometimes sends spurious changes on the PSM state
of the broadcast HLID. This causes us to search for a station on a
non-peer link and fail, causing warnings in our log.

Prevent the driver from considering PSM changes for any non-peer HLIDs.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ti/wlcore/ps.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ti/wlcore/ps.c b/drivers/net/wireless/ti/wlcore/ps.c
index 26bfc365ba70..b52516eed7b2 100644
--- a/drivers/net/wireless/ti/wlcore/ps.c
+++ b/drivers/net/wireless/ti/wlcore/ps.c
@@ -280,7 +280,11 @@ void wl12xx_ps_link_start(struct wl1271 *wl, struct wl12xx_vif *wlvif,
 	struct ieee80211_sta *sta;
 	struct ieee80211_vif *vif = wl12xx_wlvif_to_vif(wlvif);
 
-	if (test_bit(hlid, &wl->ap_ps_map))
+	if (WARN_ON_ONCE(wlvif->bss_type != BSS_TYPE_AP_BSS))
+		return;
+
+	if (!test_bit(hlid, wlvif->ap.sta_hlid_map) ||
+	    test_bit(hlid, &wl->ap_ps_map))
 		return;
 
 	wl1271_debug(DEBUG_PSM, "start mac80211 PSM on hlid %d pkts %d "
-- 
cgit v1.2.2


From 75fb4df7f804229372e073977615a149a4a28dc0 Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Mon, 10 Feb 2014 13:47:21 +0200
Subject: wlcore/wl12xx/wl18xx: simplify fw_status handling

Instead of splitting the fw_status into 2 and using some
complex calculations, read the fw status and let each low-level
driver (wl12xx/wl18xx) convert it into a common struct.

This is required for the upcoming fw api changes, which
break the current logic anyway.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ti/wl12xx/main.c     | 35 ++++++++++-
 drivers/net/wireless/ti/wl12xx/wl12xx.h   | 50 ++++++++++++++++
 drivers/net/wireless/ti/wl18xx/main.c     | 39 ++++++++++++-
 drivers/net/wireless/ti/wl18xx/tx.c       |  4 +-
 drivers/net/wireless/ti/wl18xx/wl18xx.h   | 53 +++++++++++++++++
 drivers/net/wireless/ti/wlcore/cmd.c      | 11 +++-
 drivers/net/wireless/ti/wlcore/hw_ops.h   |  9 +++
 drivers/net/wireless/ti/wlcore/main.c     | 96 +++++++++++++++----------------
 drivers/net/wireless/ti/wlcore/rx.c       |  2 +-
 drivers/net/wireless/ti/wlcore/rx.h       |  2 +-
 drivers/net/wireless/ti/wlcore/wlcore.h   |  7 ++-
 drivers/net/wireless/ti/wlcore/wlcore_i.h | 72 ++++++++++-------------
 12 files changed, 277 insertions(+), 103 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c
index be7129ba16ad..3ad8767505c5 100644
--- a/drivers/net/wireless/ti/wl12xx/main.c
+++ b/drivers/net/wireless/ti/wl12xx/main.c
@@ -1378,7 +1378,7 @@ static u32 wl12xx_get_rx_packet_len(struct wl1271 *wl, void *rx_data,
 
 static int wl12xx_tx_delayed_compl(struct wl1271 *wl)
 {
-	if (wl->fw_status_1->tx_results_counter ==
+	if (wl->fw_status->tx_results_counter ==
 	    (wl->tx_results_count & 0xff))
 		return 0;
 
@@ -1438,6 +1438,37 @@ out:
 	return ret;
 }
 
+static void wl12xx_convert_fw_status(struct wl1271 *wl, void *raw_fw_status,
+				     struct wl_fw_status *fw_status)
+{
+	struct wl12xx_fw_status *int_fw_status = raw_fw_status;
+
+	fw_status->intr = le32_to_cpu(int_fw_status->intr);
+	fw_status->fw_rx_counter = int_fw_status->fw_rx_counter;
+	fw_status->drv_rx_counter = int_fw_status->drv_rx_counter;
+	fw_status->tx_results_counter = int_fw_status->tx_results_counter;
+	fw_status->rx_pkt_descs = int_fw_status->rx_pkt_descs;
+
+	fw_status->fw_localtime = le32_to_cpu(int_fw_status->fw_localtime);
+	fw_status->link_ps_bitmap = le32_to_cpu(int_fw_status->link_ps_bitmap);
+	fw_status->link_fast_bitmap =
+			le32_to_cpu(int_fw_status->link_fast_bitmap);
+	fw_status->total_released_blks =
+			le32_to_cpu(int_fw_status->total_released_blks);
+	fw_status->tx_total = le32_to_cpu(int_fw_status->tx_total);
+
+	fw_status->counters.tx_released_pkts =
+			int_fw_status->counters.tx_released_pkts;
+	fw_status->counters.tx_lnk_free_pkts =
+			int_fw_status->counters.tx_lnk_free_pkts;
+	fw_status->counters.tx_voice_released_blks =
+			int_fw_status->counters.tx_voice_released_blks;
+	fw_status->counters.tx_last_rate =
+			int_fw_status->counters.tx_last_rate;
+
+	fw_status->log_start_addr = le32_to_cpu(int_fw_status->log_start_addr);
+}
+
 static u32 wl12xx_sta_get_ap_rate_mask(struct wl1271 *wl,
 				       struct wl12xx_vif *wlvif)
 {
@@ -1677,6 +1708,7 @@ static struct wlcore_ops wl12xx_ops = {
 	.tx_delayed_compl	= wl12xx_tx_delayed_compl,
 	.hw_init		= wl12xx_hw_init,
 	.init_vif		= NULL,
+	.convert_fw_status	= wl12xx_convert_fw_status,
 	.sta_get_ap_rate_mask	= wl12xx_sta_get_ap_rate_mask,
 	.get_pg_ver		= wl12xx_get_pg_ver,
 	.get_mac		= wl12xx_get_mac,
@@ -1725,6 +1757,7 @@ static int wl12xx_setup(struct wl1271 *wl)
 	wl->band_rate_to_idx = wl12xx_band_rate_to_idx;
 	wl->hw_tx_rate_tbl_size = WL12XX_CONF_HW_RXTX_RATE_MAX;
 	wl->hw_min_ht_rate = WL12XX_CONF_HW_RXTX_RATE_MCS0;
+	wl->fw_status_len = sizeof(struct wl12xx_fw_status);
 	wl->fw_status_priv_len = 0;
 	wl->stats.fw_stats_len = sizeof(struct wl12xx_acx_statistics);
 	wlcore_set_ht_cap(wl, IEEE80211_BAND_2GHZ, &wl12xx_ht_cap);
diff --git a/drivers/net/wireless/ti/wl12xx/wl12xx.h b/drivers/net/wireless/ti/wl12xx/wl12xx.h
index 9e5484a73667..b9950f87f01f 100644
--- a/drivers/net/wireless/ti/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/ti/wl12xx/wl12xx.h
@@ -79,4 +79,54 @@ struct wl12xx_priv {
 	struct wl127x_rx_mem_pool_addr *rx_mem_addr;
 };
 
+struct wl12xx_fw_packet_counters {
+	/* Cumulative counter of released packets per AC */
+	u8 tx_released_pkts[NUM_TX_QUEUES];
+
+	/* Cumulative counter of freed packets per HLID */
+	u8 tx_lnk_free_pkts[WL12XX_MAX_LINKS];
+
+	/* Cumulative counter of released Voice memory blocks */
+	u8 tx_voice_released_blks;
+
+	/* Tx rate of the last transmitted packet */
+	u8 tx_last_rate;
+
+	u8 padding[2];
+} __packed;
+
+/* FW status registers */
+struct wl12xx_fw_status {
+	__le32 intr;
+	u8  fw_rx_counter;
+	u8  drv_rx_counter;
+	u8  reserved;
+	u8  tx_results_counter;
+	__le32 rx_pkt_descs[WL12XX_NUM_RX_DESCRIPTORS];
+
+	__le32 fw_localtime;
+
+	/*
+	 * A bitmap (where each bit represents a single HLID)
+	 * to indicate if the station is in PS mode.
+	 */
+	__le32 link_ps_bitmap;
+
+	/*
+	 * A bitmap (where each bit represents a single HLID) to indicate
+	 * if the station is in Fast mode
+	 */
+	__le32 link_fast_bitmap;
+
+	/* Cumulative counter of total released mem blocks since FW-reset */
+	__le32 total_released_blks;
+
+	/* Size (in Memory Blocks) of TX pool */
+	__le32 tx_total;
+
+	struct wl12xx_fw_packet_counters counters;
+
+	__le32 log_start_addr;
+} __packed;
+
 #endif /* __WL12XX_PRIV_H__ */
diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c
index ec37b16585df..cbf9bf375c14 100644
--- a/drivers/net/wireless/ti/wl18xx/main.c
+++ b/drivers/net/wireless/ti/wl18xx/main.c
@@ -1133,6 +1133,39 @@ static int wl18xx_hw_init(struct wl1271 *wl)
 	return ret;
 }
 
+static void wl18xx_convert_fw_status(struct wl1271 *wl, void *raw_fw_status,
+				     struct wl_fw_status *fw_status)
+{
+	struct wl18xx_fw_status *int_fw_status = raw_fw_status;
+
+	fw_status->intr = le32_to_cpu(int_fw_status->intr);
+	fw_status->fw_rx_counter = int_fw_status->fw_rx_counter;
+	fw_status->drv_rx_counter = int_fw_status->drv_rx_counter;
+	fw_status->tx_results_counter = int_fw_status->tx_results_counter;
+	fw_status->rx_pkt_descs = int_fw_status->rx_pkt_descs;
+
+	fw_status->fw_localtime = le32_to_cpu(int_fw_status->fw_localtime);
+	fw_status->link_ps_bitmap = le32_to_cpu(int_fw_status->link_ps_bitmap);
+	fw_status->link_fast_bitmap =
+			le32_to_cpu(int_fw_status->link_fast_bitmap);
+	fw_status->total_released_blks =
+			le32_to_cpu(int_fw_status->total_released_blks);
+	fw_status->tx_total = le32_to_cpu(int_fw_status->tx_total);
+
+	fw_status->counters.tx_released_pkts =
+			int_fw_status->counters.tx_released_pkts;
+	fw_status->counters.tx_lnk_free_pkts =
+			int_fw_status->counters.tx_lnk_free_pkts;
+	fw_status->counters.tx_voice_released_blks =
+			int_fw_status->counters.tx_voice_released_blks;
+	fw_status->counters.tx_last_rate =
+			int_fw_status->counters.tx_last_rate;
+
+	fw_status->log_start_addr = le32_to_cpu(int_fw_status->log_start_addr);
+
+	fw_status->priv = &int_fw_status->priv;
+}
+
 static void wl18xx_set_tx_desc_csum(struct wl1271 *wl,
 				    struct wl1271_tx_hw_descr *desc,
 				    struct sk_buff *skb)
@@ -1572,7 +1605,7 @@ static bool wl18xx_lnk_high_prio(struct wl1271 *wl, u8 hlid,
 {
 	u8 thold;
 	struct wl18xx_fw_status_priv *status_priv =
-		(struct wl18xx_fw_status_priv *)wl->fw_status_2->priv;
+		(struct wl18xx_fw_status_priv *)wl->fw_status->priv;
 	u32 suspend_bitmap = le32_to_cpu(status_priv->link_suspend_bitmap);
 
 	/* suspended links are never high priority */
@@ -1594,7 +1627,7 @@ static bool wl18xx_lnk_low_prio(struct wl1271 *wl, u8 hlid,
 {
 	u8 thold;
 	struct wl18xx_fw_status_priv *status_priv =
-		(struct wl18xx_fw_status_priv *)wl->fw_status_2->priv;
+		(struct wl18xx_fw_status_priv *)wl->fw_status->priv;
 	u32 suspend_bitmap = le32_to_cpu(status_priv->link_suspend_bitmap);
 
 	if (test_bit(hlid, (unsigned long *)&suspend_bitmap))
@@ -1632,6 +1665,7 @@ static struct wlcore_ops wl18xx_ops = {
 	.tx_immediate_compl = wl18xx_tx_immediate_completion,
 	.tx_delayed_compl = NULL,
 	.hw_init	= wl18xx_hw_init,
+	.convert_fw_status = wl18xx_convert_fw_status,
 	.set_tx_desc_csum = wl18xx_set_tx_desc_csum,
 	.get_pg_ver	= wl18xx_get_pg_ver,
 	.set_rx_csum = wl18xx_set_rx_csum,
@@ -1726,6 +1760,7 @@ static int wl18xx_setup(struct wl1271 *wl)
 	wl->band_rate_to_idx = wl18xx_band_rate_to_idx;
 	wl->hw_tx_rate_tbl_size = WL18XX_CONF_HW_RXTX_RATE_MAX;
 	wl->hw_min_ht_rate = WL18XX_CONF_HW_RXTX_RATE_MCS0;
+	wl->fw_status_len = sizeof(struct wl18xx_fw_status);
 	wl->fw_status_priv_len = sizeof(struct wl18xx_fw_status_priv);
 	wl->stats.fw_stats_len = sizeof(struct wl18xx_acx_statistics);
 	wl->static_data_priv_len = sizeof(struct wl18xx_static_data_priv);
diff --git a/drivers/net/wireless/ti/wl18xx/tx.c b/drivers/net/wireless/ti/wl18xx/tx.c
index 57c694396647..be1ebd55ac88 100644
--- a/drivers/net/wireless/ti/wl18xx/tx.c
+++ b/drivers/net/wireless/ti/wl18xx/tx.c
@@ -32,7 +32,7 @@ static
 void wl18xx_get_last_tx_rate(struct wl1271 *wl, struct ieee80211_vif *vif,
 			     struct ieee80211_tx_rate *rate)
 {
-	u8 fw_rate = wl->fw_status_2->counters.tx_last_rate;
+	u8 fw_rate = wl->fw_status->counters.tx_last_rate;
 
 	if (fw_rate > CONF_HW_RATE_INDEX_MAX) {
 		wl1271_error("last Tx rate invalid: %d", fw_rate);
@@ -139,7 +139,7 @@ static void wl18xx_tx_complete_packet(struct wl1271 *wl, u8 tx_stat_byte)
 void wl18xx_tx_immediate_complete(struct wl1271 *wl)
 {
 	struct wl18xx_fw_status_priv *status_priv =
-		(struct wl18xx_fw_status_priv *)wl->fw_status_2->priv;
+		(struct wl18xx_fw_status_priv *)wl->fw_status->priv;
 	struct wl18xx_priv *priv = wl->priv;
 	u8 i;
 
diff --git a/drivers/net/wireless/ti/wl18xx/wl18xx.h b/drivers/net/wireless/ti/wl18xx/wl18xx.h
index 9204e07ee432..d32a6af2df68 100644
--- a/drivers/net/wireless/ti/wl18xx/wl18xx.h
+++ b/drivers/net/wireless/ti/wl18xx/wl18xx.h
@@ -109,6 +109,59 @@ struct wl18xx_fw_status_priv {
 	u8 padding[3];
 };
 
+struct wl18xx_fw_packet_counters {
+	/* Cumulative counter of released packets per AC */
+	u8 tx_released_pkts[NUM_TX_QUEUES];
+
+	/* Cumulative counter of freed packets per HLID */
+	u8 tx_lnk_free_pkts[WL12XX_MAX_LINKS];
+
+	/* Cumulative counter of released Voice memory blocks */
+	u8 tx_voice_released_blks;
+
+	/* Tx rate of the last transmitted packet */
+	u8 tx_last_rate;
+
+	u8 padding[2];
+} __packed;
+
+/* FW status registers */
+struct wl18xx_fw_status {
+	__le32 intr;
+	u8  fw_rx_counter;
+	u8  drv_rx_counter;
+	u8  reserved;
+	u8  tx_results_counter;
+	__le32 rx_pkt_descs[WL18XX_NUM_RX_DESCRIPTORS];
+
+	__le32 fw_localtime;
+
+	/*
+	 * A bitmap (where each bit represents a single HLID)
+	 * to indicate if the station is in PS mode.
+	 */
+	__le32 link_ps_bitmap;
+
+	/*
+	 * A bitmap (where each bit represents a single HLID) to indicate
+	 * if the station is in Fast mode
+	 */
+	__le32 link_fast_bitmap;
+
+	/* Cumulative counter of total released mem blocks since FW-reset */
+	__le32 total_released_blks;
+
+	/* Size (in Memory Blocks) of TX pool */
+	__le32 tx_total;
+
+	struct wl18xx_fw_packet_counters counters;
+
+	__le32 log_start_addr;
+
+	/* Private status to be used by the lower drivers */
+	struct wl18xx_fw_status_priv priv;
+} __packed;
+
 #define WL18XX_PHY_VERSION_MAX_LEN 20
 
 struct wl18xx_static_data_priv {
diff --git a/drivers/net/wireless/ti/wlcore/cmd.c b/drivers/net/wireless/ti/wlcore/cmd.c
index 9b2ecf52449f..4d19fd22e23c 100644
--- a/drivers/net/wireless/ti/wlcore/cmd.c
+++ b/drivers/net/wireless/ti/wlcore/cmd.c
@@ -324,9 +324,14 @@ int wl12xx_allocate_link(struct wl1271 *wl, struct wl12xx_vif *wlvif, u8 *hlid)
 	__set_bit(link, wlvif->links_map);
 	spin_unlock_irqrestore(&wl->wl_lock, flags);
 
-	/* take the last "freed packets" value from the current FW status */
-	wl->links[link].prev_freed_pkts =
-			wl->fw_status_2->counters.tx_lnk_free_pkts[link];
+	/*
+	 * take the last "freed packets" value from the current FW status.
+	 * on recovery, we might not have fw_status yet, and
+	 * tx_lnk_free_pkts will be NULL. check for it.
+	 */
+	if (wl->fw_status->counters.tx_lnk_free_pkts)
+		wl->links[link].prev_freed_pkts =
+			wl->fw_status->counters.tx_lnk_free_pkts[link];
 	wl->links[link].wlvif = wlvif;
 
 	/*
diff --git a/drivers/net/wireless/ti/wlcore/hw_ops.h b/drivers/net/wireless/ti/wlcore/hw_ops.h
index 51f8d634d32f..1555ff970050 100644
--- a/drivers/net/wireless/ti/wlcore/hw_ops.h
+++ b/drivers/net/wireless/ti/wlcore/hw_ops.h
@@ -106,6 +106,15 @@ wlcore_hw_init_vif(struct wl1271 *wl, struct wl12xx_vif *wlvif)
 	return 0;
 }
 
+static inline void
+wlcore_hw_convert_fw_status(struct wl1271 *wl, void *raw_fw_status,
+			    struct wl_fw_status *fw_status)
+{
+	BUG_ON(!wl->ops->convert_fw_status);
+
+	wl->ops->convert_fw_status(wl, raw_fw_status, fw_status);
+}
+
 static inline u32
 wlcore_hw_sta_get_ap_rate_mask(struct wl1271 *wl, struct wl12xx_vif *wlvif)
 {
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 1e191967aa26..70a3e573ca3d 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -357,12 +357,12 @@ static void wl12xx_irq_ps_regulate_link(struct wl1271 *wl,
 
 static void wl12xx_irq_update_links_status(struct wl1271 *wl,
 					   struct wl12xx_vif *wlvif,
-					   struct wl_fw_status_2 *status)
+					   struct wl_fw_status *status)
 {
 	u32 cur_fw_ps_map;
 	u8 hlid;
 
-	cur_fw_ps_map = le32_to_cpu(status->link_ps_bitmap);
+	cur_fw_ps_map = status->link_ps_bitmap;
 	if (wl->ap_fw_ps_map != cur_fw_ps_map) {
 		wl1271_debug(DEBUG_PSM,
 			     "link ps prev 0x%x cur 0x%x changed 0x%x",
@@ -377,41 +377,38 @@ static void wl12xx_irq_update_links_status(struct wl1271 *wl,
 					    wl->links[hlid].allocated_pkts);
 }
 
-static int wlcore_fw_status(struct wl1271 *wl,
-			    struct wl_fw_status_1 *status_1,
-			    struct wl_fw_status_2 *status_2)
+static int wlcore_fw_status(struct wl1271 *wl, struct wl_fw_status *status)
 {
 	struct wl12xx_vif *wlvif;
 	struct timespec ts;
 	u32 old_tx_blk_count = wl->tx_blocks_available;
 	int avail, freed_blocks;
 	int i;
-	size_t status_len;
 	int ret;
 	struct wl1271_link *lnk;
 
-	status_len = WLCORE_FW_STATUS_1_LEN(wl->num_rx_desc) +
-		sizeof(*status_2) + wl->fw_status_priv_len;
-
-	ret = wlcore_raw_read_data(wl, REG_RAW_FW_STATUS_ADDR, status_1,
-				   status_len, false);
+	ret = wlcore_raw_read_data(wl, REG_RAW_FW_STATUS_ADDR,
+				   wl->raw_fw_status,
+				   wl->fw_status_len, false);
 	if (ret < 0)
 		return ret;
 
+	wlcore_hw_convert_fw_status(wl, wl->raw_fw_status, wl->fw_status);
+
 	wl1271_debug(DEBUG_IRQ, "intr: 0x%x (fw_rx_counter = %d, "
 		     "drv_rx_counter = %d, tx_results_counter = %d)",
-		     status_1->intr,
-		     status_1->fw_rx_counter,
-		     status_1->drv_rx_counter,
-		     status_1->tx_results_counter);
+		     status->intr,
+		     status->fw_rx_counter,
+		     status->drv_rx_counter,
+		     status->tx_results_counter);
 
 	for (i = 0; i < NUM_TX_QUEUES; i++) {
 		/* prevent wrap-around in freed-packets counter */
 		wl->tx_allocated_pkts[i] -=
-				(status_2->counters.tx_released_pkts[i] -
+				(status->counters.tx_released_pkts[i] -
 				wl->tx_pkts_freed[i]) & 0xff;
 
-		wl->tx_pkts_freed[i] = status_2->counters.tx_released_pkts[i];
+		wl->tx_pkts_freed[i] = status->counters.tx_released_pkts[i];
 	}
 
 
@@ -420,29 +417,28 @@ static int wlcore_fw_status(struct wl1271 *wl,
 		lnk = &wl->links[i];
 
 		/* prevent wrap-around in freed-packets counter */
-		diff = (status_2->counters.tx_lnk_free_pkts[i] -
+		diff = (status->counters.tx_lnk_free_pkts[i] -
 		       lnk->prev_freed_pkts) & 0xff;
 
 		if (diff == 0)
 			continue;
 
 		lnk->allocated_pkts -= diff;
-		lnk->prev_freed_pkts = status_2->counters.tx_lnk_free_pkts[i];
+		lnk->prev_freed_pkts = status->counters.tx_lnk_free_pkts[i];
 
 		/* accumulate the prev_freed_pkts counter */
 		lnk->total_freed_pkts += diff;
 	}
 
 	/* prevent wrap-around in total blocks counter */
-	if (likely(wl->tx_blocks_freed <=
-		   le32_to_cpu(status_2->total_released_blks)))
-		freed_blocks = le32_to_cpu(status_2->total_released_blks) -
+	if (likely(wl->tx_blocks_freed <= status->total_released_blks))
+		freed_blocks = status->total_released_blks -
 			       wl->tx_blocks_freed;
 	else
 		freed_blocks = 0x100000000LL - wl->tx_blocks_freed +
-			       le32_to_cpu(status_2->total_released_blks);
+			       status->total_released_blks;
 
-	wl->tx_blocks_freed = le32_to_cpu(status_2->total_released_blks);
+	wl->tx_blocks_freed = status->total_released_blks;
 
 	wl->tx_allocated_blocks -= freed_blocks;
 
@@ -458,7 +454,7 @@ static int wlcore_fw_status(struct wl1271 *wl,
 			cancel_delayed_work(&wl->tx_watchdog_work);
 	}
 
-	avail = le32_to_cpu(status_2->tx_total) - wl->tx_allocated_blocks;
+	avail = status->tx_total - wl->tx_allocated_blocks;
 
 	/*
 	 * The FW might change the total number of TX memblocks before
@@ -477,15 +473,15 @@ static int wlcore_fw_status(struct wl1271 *wl,
 
 	/* for AP update num of allocated TX blocks per link and ps status */
 	wl12xx_for_each_wlvif_ap(wl, wlvif) {
-		wl12xx_irq_update_links_status(wl, wlvif, status_2);
+		wl12xx_irq_update_links_status(wl, wlvif, status);
 	}
 
 	/* update the host-chipset time offset */
 	getnstimeofday(&ts);
 	wl->time_offset = (timespec_to_ns(&ts) >> 10) -
-		(s64)le32_to_cpu(status_2->fw_localtime);
+		(s64)(status->fw_localtime);
 
-	wl->fw_fast_lnk_map = le32_to_cpu(status_2->link_fast_bitmap);
+	wl->fw_fast_lnk_map = status->link_fast_bitmap;
 
 	return 0;
 }
@@ -549,13 +545,13 @@ static int wlcore_irq_locked(struct wl1271 *wl)
 		clear_bit(WL1271_FLAG_IRQ_RUNNING, &wl->flags);
 		smp_mb__after_clear_bit();
 
-		ret = wlcore_fw_status(wl, wl->fw_status_1, wl->fw_status_2);
+		ret = wlcore_fw_status(wl, wl->fw_status);
 		if (ret < 0)
 			goto out;
 
 		wlcore_hw_tx_immediate_compl(wl);
 
-		intr = le32_to_cpu(wl->fw_status_1->intr);
+		intr = wl->fw_status->intr;
 		intr &= WLCORE_ALL_INTR_MASK;
 		if (!intr) {
 			done = true;
@@ -584,7 +580,7 @@ static int wlcore_irq_locked(struct wl1271 *wl)
 		if (likely(intr & WL1271_ACX_INTR_DATA)) {
 			wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_DATA");
 
-			ret = wlcore_rx(wl, wl->fw_status_1);
+			ret = wlcore_rx(wl, wl->fw_status);
 			if (ret < 0)
 				goto out;
 
@@ -843,11 +839,11 @@ static void wl12xx_read_fwlog_panic(struct wl1271 *wl)
 		wl12xx_cmd_stop_fwlog(wl);
 
 	/* Read the first memory block address */
-	ret = wlcore_fw_status(wl, wl->fw_status_1, wl->fw_status_2);
+	ret = wlcore_fw_status(wl, wl->fw_status);
 	if (ret < 0)
 		goto out;
 
-	addr = le32_to_cpu(wl->fw_status_2->log_start_addr);
+	addr = wl->fw_status->log_start_addr;
 	if (!addr)
 		goto out;
 
@@ -990,23 +986,23 @@ static int wlcore_fw_wakeup(struct wl1271 *wl)
 
 static int wl1271_setup(struct wl1271 *wl)
 {
-	wl->fw_status_1 = kzalloc(WLCORE_FW_STATUS_1_LEN(wl->num_rx_desc) +
-				  sizeof(*wl->fw_status_2) +
-				  wl->fw_status_priv_len, GFP_KERNEL);
-	if (!wl->fw_status_1)
-		return -ENOMEM;
+	wl->raw_fw_status = kzalloc(wl->fw_status_len, GFP_KERNEL);
+	if (!wl->raw_fw_status)
+		goto err;
 
-	wl->fw_status_2 = (struct wl_fw_status_2 *)
-				(((u8 *) wl->fw_status_1) +
-				WLCORE_FW_STATUS_1_LEN(wl->num_rx_desc));
+	wl->fw_status = kzalloc(sizeof(*wl->fw_status), GFP_KERNEL);
+	if (!wl->fw_status)
+		goto err;
 
 	wl->tx_res_if = kzalloc(sizeof(*wl->tx_res_if), GFP_KERNEL);
-	if (!wl->tx_res_if) {
-		kfree(wl->fw_status_1);
-		return -ENOMEM;
-	}
+	if (!wl->tx_res_if)
+		goto err;
 
 	return 0;
+err:
+	kfree(wl->fw_status);
+	kfree(wl->raw_fw_status);
+	return -ENOMEM;
 }
 
 static int wl12xx_set_power_on(struct wl1271 *wl)
@@ -1952,9 +1948,10 @@ static void wlcore_op_stop_locked(struct wl1271 *wl)
 
 	wl1271_debugfs_reset(wl);
 
-	kfree(wl->fw_status_1);
-	wl->fw_status_1 = NULL;
-	wl->fw_status_2 = NULL;
+	kfree(wl->raw_fw_status);
+	wl->raw_fw_status = NULL;
+	kfree(wl->fw_status);
+	wl->fw_status = NULL;
 	kfree(wl->tx_res_if);
 	wl->tx_res_if = NULL;
 	kfree(wl->target_mem_map);
@@ -6025,7 +6022,8 @@ int wlcore_free_hw(struct wl1271 *wl)
 	kfree(wl->nvs);
 	wl->nvs = NULL;
 
-	kfree(wl->fw_status_1);
+	kfree(wl->raw_fw_status);
+	kfree(wl->fw_status);
 	kfree(wl->tx_res_if);
 	destroy_workqueue(wl->freezable_wq);
 
diff --git a/drivers/net/wireless/ti/wlcore/rx.c b/drivers/net/wireless/ti/wlcore/rx.c
index 94ab445fde77..a047e879d37b 100644
--- a/drivers/net/wireless/ti/wlcore/rx.c
+++ b/drivers/net/wireless/ti/wlcore/rx.c
@@ -203,7 +203,7 @@ static int wl1271_rx_handle_data(struct wl1271 *wl, u8 *data, u32 length,
 	return is_data;
 }
 
-int wlcore_rx(struct wl1271 *wl, struct wl_fw_status_1 *status)
+int wlcore_rx(struct wl1271 *wl, struct wl_fw_status *status)
 {
 	unsigned long active_hlids[BITS_TO_LONGS(WL12XX_MAX_LINKS)] = {0};
 	u32 buf_size;
diff --git a/drivers/net/wireless/ti/wlcore/rx.h b/drivers/net/wireless/ti/wlcore/rx.h
index 3363f60fb7da..a3b1618db27c 100644
--- a/drivers/net/wireless/ti/wlcore/rx.h
+++ b/drivers/net/wireless/ti/wlcore/rx.h
@@ -142,7 +142,7 @@ struct wl1271_rx_descriptor {
 	u8  reserved;
 } __packed;
 
-int wlcore_rx(struct wl1271 *wl, struct wl_fw_status_1 *status);
+int wlcore_rx(struct wl1271 *wl, struct wl_fw_status *status);
 u8 wl1271_rate_to_idx(int rate, enum ieee80211_band band);
 int wl1271_rx_filter_enable(struct wl1271 *wl,
 			    int index, bool enable,
diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h
index a3cc11740c88..cec526502054 100644
--- a/drivers/net/wireless/ti/wlcore/wlcore.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore.h
@@ -73,6 +73,8 @@ struct wlcore_ops {
 	void (*tx_immediate_compl)(struct wl1271 *wl);
 	int (*hw_init)(struct wl1271 *wl);
 	int (*init_vif)(struct wl1271 *wl, struct wl12xx_vif *wlvif);
+	void (*convert_fw_status)(struct wl1271 *wl, void *raw_fw_status,
+				  struct wl_fw_status *fw_status);
 	u32 (*sta_get_ap_rate_mask)(struct wl1271 *wl,
 				    struct wl12xx_vif *wlvif);
 	int (*get_pg_ver)(struct wl1271 *wl, s8 *ver);
@@ -346,8 +348,8 @@ struct wl1271 {
 	u32 buffer_cmd;
 	u32 buffer_busyword[WL1271_BUSY_WORD_CNT];
 
-	struct wl_fw_status_1 *fw_status_1;
-	struct wl_fw_status_2 *fw_status_2;
+	void *raw_fw_status;
+	struct wl_fw_status *fw_status;
 	struct wl1271_tx_hw_res_if *tx_res_if;
 
 	/* Current chipset configuration */
@@ -448,6 +450,7 @@ struct wl1271 {
 	struct ieee80211_sta_ht_cap ht_cap[WLCORE_NUM_BANDS];
 
 	/* size of the private FW status data */
+	size_t fw_status_len;
 	size_t fw_status_priv_len;
 
 	/* RX Data filter rule state - enabled/disabled */
diff --git a/drivers/net/wireless/ti/wlcore/wlcore_i.h b/drivers/net/wireless/ti/wlcore/wlcore_i.h
index 38153323a36b..32e1e8b23a8b 100644
--- a/drivers/net/wireless/ti/wlcore/wlcore_i.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore_i.h
@@ -120,70 +120,58 @@ struct wl1271_chip {
 
 #define AP_MAX_STATIONS            8
 
-struct wl_fw_packet_counters {
-	/* Cumulative counter of released packets per AC */
-	u8 tx_released_pkts[NUM_TX_QUEUES];
-
-	/* Cumulative counter of freed packets per HLID */
-	u8 tx_lnk_free_pkts[WL12XX_MAX_LINKS];
-
-	/* Cumulative counter of released Voice memory blocks */
-	u8 tx_voice_released_blks;
-
-	/* Tx rate of the last transmitted packet */
-	u8 tx_last_rate;
-
-	u8 padding[2];
-} __packed;
-
-/* FW status registers */
-struct wl_fw_status_1 {
-	__le32 intr;
+struct wl_fw_status {
+	u32 intr;
 	u8  fw_rx_counter;
 	u8  drv_rx_counter;
-	u8  reserved;
 	u8  tx_results_counter;
-	__le32 rx_pkt_descs[0];
-} __packed;
-
-/*
- * Each HW arch has a different number of Rx descriptors.
- * The length of the status depends on it, since it holds an array
- * of descriptors.
- */
-#define WLCORE_FW_STATUS_1_LEN(num_rx_desc) \
-		(sizeof(struct wl_fw_status_1) + \
-		(sizeof(((struct wl_fw_status_1 *)0)->rx_pkt_descs[0])) * \
-		num_rx_desc)
+	__le32 *rx_pkt_descs;
 
-struct wl_fw_status_2 {
-	__le32 fw_localtime;
+	u32 fw_localtime;
 
 	/*
 	 * A bitmap (where each bit represents a single HLID)
 	 * to indicate if the station is in PS mode.
 	 */
-	__le32 link_ps_bitmap;
+	u32 link_ps_bitmap;
 
 	/*
 	 * A bitmap (where each bit represents a single HLID) to indicate
 	 * if the station is in Fast mode
 	 */
-	__le32 link_fast_bitmap;
+	u32 link_fast_bitmap;
 
 	/* Cumulative counter of total released mem blocks since FW-reset */
-	__le32 total_released_blks;
+	u32 total_released_blks;
 
 	/* Size (in Memory Blocks) of TX pool */
-	__le32 tx_total;
+	u32 tx_total;
 
-	struct wl_fw_packet_counters counters;
+	struct {
+		/*
+		 * Cumulative counter of released packets per AC
+		 * (length of the array is NUM_TX_QUEUES)
+		 */
+		u8 *tx_released_pkts;
+
+		/*
+		 * Cumulative counter of freed packets per HLID
+		 * (length of the array is WL12XX_MAX_LINKS)
+		 */
+		u8 *tx_lnk_free_pkts;
+
+		/* Cumulative counter of released Voice memory blocks */
+		u8 tx_voice_released_blks;
+
+		/* Tx rate of the last transmitted packet */
+		u8 tx_last_rate;
+	} counters;
 
-	__le32 log_start_addr;
+	u32 log_start_addr;
 
 	/* Private status to be used by the lower drivers */
-	u8 priv[0];
-} __packed;
+	void *priv;
+};
 
 #define WL1271_MAX_CHANNELS 64
 struct wl1271_scan {
-- 
cgit v1.2.2


From da08fdfaf09f161c923c9d2b7db2fba8cc9c457c Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Mon, 10 Feb 2014 13:47:22 +0200
Subject: wlcore/wl12xx/wl18xx: configure num_links per-hw

Upcoming fw versions will have different max links support
(according to the hw). Get ready for it by configuring
wl->num_links per-hw, instead of using the const WL12XX_MAX_LINKS.

However, continue using WLCORE_MAX_LINKS in order to simplify
structs declarations (we use it in multiple bitmaps, and converting
them to dynamic arrays is just cumbersome).

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ti/wl12xx/main.c     |  3 +++
 drivers/net/wireless/ti/wl12xx/wl12xx.h   |  2 ++
 drivers/net/wireless/ti/wl18xx/main.c     |  3 +++
 drivers/net/wireless/ti/wl18xx/wl18xx.h   |  4 +++-
 drivers/net/wireless/ti/wlcore/cmd.c      |  4 ++--
 drivers/net/wireless/ti/wlcore/event.c    |  4 ++--
 drivers/net/wireless/ti/wlcore/main.c     | 12 ++++++++----
 drivers/net/wireless/ti/wlcore/rx.c       |  8 ++++----
 drivers/net/wireless/ti/wlcore/tx.c       | 20 ++++++++++----------
 drivers/net/wireless/ti/wlcore/wlcore.h   |  8 +++++---
 drivers/net/wireless/ti/wlcore/wlcore_i.h | 13 +++++++++----
 11 files changed, 51 insertions(+), 30 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c
index 3ad8767505c5..69df5bc13dd2 100644
--- a/drivers/net/wireless/ti/wl12xx/main.c
+++ b/drivers/net/wireless/ti/wl12xx/main.c
@@ -1749,9 +1749,12 @@ static int wl12xx_setup(struct wl1271 *wl)
 	struct wlcore_platdev_data *pdev_data = dev_get_platdata(&wl->pdev->dev);
 	struct wl12xx_platform_data *pdata = pdev_data->pdata;
 
+	BUILD_BUG_ON(WL12XX_MAX_LINKS > WLCORE_MAX_LINKS);
+
 	wl->rtable = wl12xx_rtable;
 	wl->num_tx_desc = WL12XX_NUM_TX_DESCRIPTORS;
 	wl->num_rx_desc = WL12XX_NUM_RX_DESCRIPTORS;
+	wl->num_links = WL12XX_MAX_LINKS;
 	wl->num_channels = 1;
 	wl->num_mac_addr = WL12XX_NUM_MAC_ADDRESSES;
 	wl->band_rate_to_idx = wl12xx_band_rate_to_idx;
diff --git a/drivers/net/wireless/ti/wl12xx/wl12xx.h b/drivers/net/wireless/ti/wl12xx/wl12xx.h
index b9950f87f01f..26b1a3f97485 100644
--- a/drivers/net/wireless/ti/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/ti/wl12xx/wl12xx.h
@@ -65,6 +65,8 @@
 
 #define WL12XX_RX_BA_MAX_SESSIONS 3
 
+#define WL12XX_MAX_LINKS 12
+
 struct wl127x_rx_mem_pool_addr {
 	u32 addr;
 	u32 addr_extra;
diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c
index cbf9bf375c14..6011b225fa17 100644
--- a/drivers/net/wireless/ti/wl18xx/main.c
+++ b/drivers/net/wireless/ti/wl18xx/main.c
@@ -1752,9 +1752,12 @@ static int wl18xx_setup(struct wl1271 *wl)
 	struct wl18xx_priv *priv = wl->priv;
 	int ret;
 
+	BUILD_BUG_ON(WL18XX_MAX_LINKS > WLCORE_MAX_LINKS);
+
 	wl->rtable = wl18xx_rtable;
 	wl->num_tx_desc = WL18XX_NUM_TX_DESCRIPTORS;
 	wl->num_rx_desc = WL18XX_NUM_RX_DESCRIPTORS;
+	wl->num_links = WL18XX_MAX_LINKS;
 	wl->num_channels = 2;
 	wl->num_mac_addr = WL18XX_NUM_MAC_ADDRESSES;
 	wl->band_rate_to_idx = wl18xx_band_rate_to_idx;
diff --git a/drivers/net/wireless/ti/wl18xx/wl18xx.h b/drivers/net/wireless/ti/wl18xx/wl18xx.h
index d32a6af2df68..38174e996d8a 100644
--- a/drivers/net/wireless/ti/wl18xx/wl18xx.h
+++ b/drivers/net/wireless/ti/wl18xx/wl18xx.h
@@ -42,6 +42,8 @@
 
 #define WL18XX_RX_BA_MAX_SESSIONS 5
 
+#define WL18XX_MAX_LINKS 12
+
 struct wl18xx_priv {
 	/* buffer for sending commands to FW */
 	u8 cmd_buf[WL18XX_CMD_MAX_SIZE];
@@ -114,7 +116,7 @@ struct wl18xx_fw_packet_counters {
 	u8 tx_released_pkts[NUM_TX_QUEUES];
 
 	/* Cumulative counter of freed packets per HLID */
-	u8 tx_lnk_free_pkts[WL12XX_MAX_LINKS];
+	u8 tx_lnk_free_pkts[WL18XX_MAX_LINKS];
 
 	/* Cumulative counter of released Voice memory blocks */
 	u8 tx_voice_released_blks;
diff --git a/drivers/net/wireless/ti/wlcore/cmd.c b/drivers/net/wireless/ti/wlcore/cmd.c
index 4d19fd22e23c..ab5ca32dd3d1 100644
--- a/drivers/net/wireless/ti/wlcore/cmd.c
+++ b/drivers/net/wireless/ti/wlcore/cmd.c
@@ -312,8 +312,8 @@ static int wlcore_get_new_session_id(struct wl1271 *wl, u8 hlid)
 int wl12xx_allocate_link(struct wl1271 *wl, struct wl12xx_vif *wlvif, u8 *hlid)
 {
 	unsigned long flags;
-	u8 link = find_first_zero_bit(wl->links_map, WL12XX_MAX_LINKS);
-	if (link >= WL12XX_MAX_LINKS)
+	u8 link = find_first_zero_bit(wl->links_map, wl->num_links);
+	if (link >= wl->num_links)
 		return -EBUSY;
 
 	wl->session_ids[link] = wlcore_get_new_session_id(wl, link);
diff --git a/drivers/net/wireless/ti/wlcore/event.c b/drivers/net/wireless/ti/wlcore/event.c
index 8d3b34965db3..1f9a36031b06 100644
--- a/drivers/net/wireless/ti/wlcore/event.c
+++ b/drivers/net/wireless/ti/wlcore/event.c
@@ -67,7 +67,7 @@ static void wl1271_stop_ba_event(struct wl1271 *wl, struct wl12xx_vif *wlvif)
 		u8 hlid;
 		struct wl1271_link *lnk;
 		for_each_set_bit(hlid, wlvif->ap.sta_hlid_map,
-				 WL12XX_MAX_LINKS) {
+				 wl->num_links) {
 			lnk = &wl->links[hlid];
 			if (!lnk->ba_bitmap)
 				continue;
@@ -172,7 +172,7 @@ static void wlcore_disconnect_sta(struct wl1271 *wl, unsigned long sta_bitmap)
 	const u8 *addr;
 	int h;
 
-	for_each_set_bit(h, &sta_bitmap, WL12XX_MAX_LINKS) {
+	for_each_set_bit(h, &sta_bitmap, wl->num_links) {
 		bool found = false;
 		/* find the ap vif connected to this sta */
 		wl12xx_for_each_wlvif_ap(wl, wlvif) {
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 70a3e573ca3d..c35d1dce6751 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -372,7 +372,7 @@ static void wl12xx_irq_update_links_status(struct wl1271 *wl,
 		wl->ap_fw_ps_map = cur_fw_ps_map;
 	}
 
-	for_each_set_bit(hlid, wlvif->ap.sta_hlid_map, WL12XX_MAX_LINKS)
+	for_each_set_bit(hlid, wlvif->ap.sta_hlid_map, wl->num_links)
 		wl12xx_irq_ps_regulate_link(wl, wlvif, hlid,
 					    wl->links[hlid].allocated_pkts);
 }
@@ -412,7 +412,7 @@ static int wlcore_fw_status(struct wl1271 *wl, struct wl_fw_status *status)
 	}
 
 
-	for_each_set_bit(i, wl->links_map, WL12XX_MAX_LINKS) {
+	for_each_set_bit(i, wl->links_map, wl->num_links) {
 		u8 diff;
 		lnk = &wl->links[i];
 
@@ -5855,7 +5855,7 @@ struct ieee80211_hw *wlcore_alloc_hw(size_t priv_size, u32 aggr_buf_size,
 	int i, j, ret;
 	unsigned int order;
 
-	BUILD_BUG_ON(AP_MAX_STATIONS > WL12XX_MAX_LINKS);
+	BUILD_BUG_ON(AP_MAX_STATIONS > WLCORE_MAX_LINKS);
 
 	hw = ieee80211_alloc_hw(sizeof(*wl), &wl1271_ops);
 	if (!hw) {
@@ -5878,8 +5878,12 @@ struct ieee80211_hw *wlcore_alloc_hw(size_t priv_size, u32 aggr_buf_size,
 
 	wl->hw = hw;
 
+	/*
+	 * wl->num_links is not configured yet, so just use WLCORE_MAX_LINKS.
+	 * we don't allocate any additional resource here, so that's fine.
+	 */
 	for (i = 0; i < NUM_TX_QUEUES; i++)
-		for (j = 0; j < WL12XX_MAX_LINKS; j++)
+		for (j = 0; j < WLCORE_MAX_LINKS; j++)
 			skb_queue_head_init(&wl->links[j].tx_queue[i]);
 
 	skb_queue_head_init(&wl->deferred_rx_queue);
diff --git a/drivers/net/wireless/ti/wlcore/rx.c b/drivers/net/wireless/ti/wlcore/rx.c
index a047e879d37b..e125974285cc 100644
--- a/drivers/net/wireless/ti/wlcore/rx.c
+++ b/drivers/net/wireless/ti/wlcore/rx.c
@@ -205,7 +205,7 @@ static int wl1271_rx_handle_data(struct wl1271 *wl, u8 *data, u32 length,
 
 int wlcore_rx(struct wl1271 *wl, struct wl_fw_status *status)
 {
-	unsigned long active_hlids[BITS_TO_LONGS(WL12XX_MAX_LINKS)] = {0};
+	unsigned long active_hlids[BITS_TO_LONGS(WLCORE_MAX_LINKS)] = {0};
 	u32 buf_size;
 	u32 fw_rx_counter = status->fw_rx_counter % wl->num_rx_desc;
 	u32 drv_rx_counter = wl->rx_counter % wl->num_rx_desc;
@@ -263,12 +263,12 @@ int wlcore_rx(struct wl1271 *wl, struct wl_fw_status *status)
 						  wl->aggr_buf + pkt_offset,
 						  pkt_len, rx_align,
 						  &hlid) == 1) {
-				if (hlid < WL12XX_MAX_LINKS)
+				if (hlid < wl->num_links)
 					__set_bit(hlid, active_hlids);
 				else
 					WARN(1,
-					     "hlid exceeded WL12XX_MAX_LINKS "
-					     "(%d)\n", hlid);
+					     "hlid (%d) exceeded MAX_LINKS\n",
+					     hlid);
 			}
 
 			wl->rx_counter++;
diff --git a/drivers/net/wireless/ti/wlcore/tx.c b/drivers/net/wireless/ti/wlcore/tx.c
index ca886efb0a57..06ab5c6d6bef 100644
--- a/drivers/net/wireless/ti/wlcore/tx.c
+++ b/drivers/net/wireless/ti/wlcore/tx.c
@@ -565,11 +565,11 @@ static struct sk_buff *wlcore_vif_dequeue_high_prio(struct wl1271 *wl,
 	int i, h, start_hlid;
 
 	/* start from the link after the last one */
-	start_hlid = (wlvif->last_tx_hlid + 1) % WL12XX_MAX_LINKS;
+	start_hlid = (wlvif->last_tx_hlid + 1) % wl->num_links;
 
 	/* dequeue according to AC, round robin on each link */
-	for (i = 0; i < WL12XX_MAX_LINKS; i++) {
-		h = (start_hlid + i) % WL12XX_MAX_LINKS;
+	for (i = 0; i < wl->num_links; i++) {
+		h = (start_hlid + i) % wl->num_links;
 
 		/* only consider connected stations */
 		if (!test_bit(h, wlvif->links_map))
@@ -693,8 +693,8 @@ static void wl1271_skb_queue_head(struct wl1271 *wl, struct wl12xx_vif *wlvif,
 		skb_queue_head(&wl->links[hlid].tx_queue[q], skb);
 
 		/* make sure we dequeue the same packet next time */
-		wlvif->last_tx_hlid = (hlid + WL12XX_MAX_LINKS - 1) %
-				      WL12XX_MAX_LINKS;
+		wlvif->last_tx_hlid = (hlid + wl->num_links - 1) %
+				      wl->num_links;
 	}
 
 	spin_lock_irqsave(&wl->wl_lock, flags);
@@ -727,7 +727,7 @@ void wl12xx_rearm_rx_streaming(struct wl1271 *wl, unsigned long *active_hlids)
 	timeout = wl->conf.rx_streaming.duration;
 	wl12xx_for_each_wlvif_sta(wl, wlvif) {
 		bool found = false;
-		for_each_set_bit(hlid, active_hlids, WL12XX_MAX_LINKS) {
+		for_each_set_bit(hlid, active_hlids, wl->num_links) {
 			if (test_bit(hlid, wlvif->links_map)) {
 				found  = true;
 				break;
@@ -764,7 +764,7 @@ int wlcore_tx_work_locked(struct wl1271 *wl)
 	struct wl1271_tx_hw_descr *desc;
 	u32 buf_offset = 0, last_len = 0;
 	bool sent_packets = false;
-	unsigned long active_hlids[BITS_TO_LONGS(WL12XX_MAX_LINKS)] = {0};
+	unsigned long active_hlids[BITS_TO_LONGS(WLCORE_MAX_LINKS)] = {0};
 	int ret = 0;
 	int bus_ret = 0;
 	u8 hlid;
@@ -1066,7 +1066,7 @@ void wl12xx_tx_reset_wlvif(struct wl1271 *wl, struct wl12xx_vif *wlvif)
 	int i;
 
 	/* TX failure */
-	for_each_set_bit(i, wlvif->links_map, WL12XX_MAX_LINKS) {
+	for_each_set_bit(i, wlvif->links_map, wl->num_links) {
 		if (wlvif->bss_type == BSS_TYPE_AP_BSS &&
 		    i != wlvif->ap.bcast_hlid && i != wlvif->ap.global_hlid) {
 			/* this calls wl12xx_free_link */
@@ -1090,7 +1090,7 @@ void wl12xx_tx_reset(struct wl1271 *wl)
 
 	/* only reset the queues if something bad happened */
 	if (wl1271_tx_total_queue_count(wl) != 0) {
-		for (i = 0; i < WL12XX_MAX_LINKS; i++)
+		for (i = 0; i < wl->num_links; i++)
 			wl1271_tx_reset_link_queues(wl, i);
 
 		for (i = 0; i < NUM_TX_QUEUES; i++)
@@ -1183,7 +1183,7 @@ void wl1271_tx_flush(struct wl1271 *wl)
 		       WL1271_TX_FLUSH_TIMEOUT / 1000);
 
 	/* forcibly flush all Tx buffers on our queues */
-	for (i = 0; i < WL12XX_MAX_LINKS; i++)
+	for (i = 0; i < wl->num_links; i++)
 		wl1271_tx_reset_link_queues(wl, i);
 
 out_wake:
diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h
index cec526502054..98b1875d6e91 100644
--- a/drivers/net/wireless/ti/wlcore/wlcore.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore.h
@@ -222,7 +222,7 @@ struct wl1271 {
 	int channel;
 	u8 system_hlid;
 
-	unsigned long links_map[BITS_TO_LONGS(WL12XX_MAX_LINKS)];
+	unsigned long links_map[BITS_TO_LONGS(WLCORE_MAX_LINKS)];
 	unsigned long roles_map[BITS_TO_LONGS(WL12XX_MAX_ROLES)];
 	unsigned long roc_map[BITS_TO_LONGS(WL12XX_MAX_ROLES)];
 	unsigned long rate_policies_map[
@@ -230,7 +230,7 @@ struct wl1271 {
 	unsigned long klv_templates_map[
 			BITS_TO_LONGS(WLCORE_MAX_KLV_TEMPLATES)];
 
-	u8 session_ids[WL12XX_MAX_LINKS];
+	u8 session_ids[WLCORE_MAX_LINKS];
 
 	struct list_head wlvif_list;
 
@@ -378,7 +378,7 @@ struct wl1271 {
 	 * AP-mode - links indexed by HLID. The global and broadcast links
 	 * are always active.
 	 */
-	struct wl1271_link links[WL12XX_MAX_LINKS];
+	struct wl1271_link links[WLCORE_MAX_LINKS];
 
 	/* number of currently active links */
 	int active_link_count;
@@ -436,6 +436,8 @@ struct wl1271 {
 	u32 num_tx_desc;
 	/* number of RX descriptors the HW supports. */
 	u32 num_rx_desc;
+	/* number of links the HW supports */
+	u8 num_links;
 
 	/* translate HW Tx rates to standard rate-indices */
 	const u8 **band_rate_to_idx;
diff --git a/drivers/net/wireless/ti/wlcore/wlcore_i.h b/drivers/net/wireless/ti/wlcore/wlcore_i.h
index 32e1e8b23a8b..256d09b3d581 100644
--- a/drivers/net/wireless/ti/wlcore/wlcore_i.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore_i.h
@@ -58,10 +58,15 @@
 #define WL1271_DEFAULT_DTIM_PERIOD 1
 
 #define WL12XX_MAX_ROLES           4
-#define WL12XX_MAX_LINKS           12
 #define WL12XX_INVALID_ROLE_ID     0xff
 #define WL12XX_INVALID_LINK_ID     0xff
 
+/*
+ * max number of links allowed by all HWs.
+ * this is NOT the actual max links supported by the current hw.
+ */
+#define WLCORE_MAX_LINKS 12
+
 /* the driver supports the 2.4Ghz and 5Ghz bands */
 #define WLCORE_NUM_BANDS           2
 
@@ -156,7 +161,7 @@ struct wl_fw_status {
 
 		/*
 		 * Cumulative counter of freed packets per HLID
-		 * (length of the array is WL12XX_MAX_LINKS)
+		 * (length of the array is wl->num_links)
 		 */
 		u8 *tx_lnk_free_pkts;
 
@@ -357,7 +362,7 @@ struct wl12xx_vif {
 
 			/* HLIDs bitmap of associated stations */
 			unsigned long sta_hlid_map[BITS_TO_LONGS(
-							WL12XX_MAX_LINKS)];
+							WLCORE_MAX_LINKS)];
 
 			/* recoreded keys - set here before AP startup */
 			struct wl1271_ap_key *recorded_keys[MAX_NUM_KEYS];
@@ -374,7 +379,7 @@ struct wl12xx_vif {
 	/* counters of packets per AC, across all links in the vif */
 	int tx_queue_count[NUM_TX_QUEUES];
 
-	unsigned long links_map[BITS_TO_LONGS(WL12XX_MAX_LINKS)];
+	unsigned long links_map[BITS_TO_LONGS(WLCORE_MAX_LINKS)];
 
 	u8 ssid[IEEE80211_MAX_SSID_LEN + 1];
 	u8 ssid_len;
-- 
cgit v1.2.2


From 32f0fd5b700064f821105be041d0075decc4ec64 Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Mon, 10 Feb 2014 13:47:23 +0200
Subject: wlcore/wl12xx/wl18xx: configure max_stations per-hw

Each hw supports a different max stations (connected to the
same ap). add a new wl->max_ap_stations and use it instead
of the current common AP_MAX_STATIONS.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ti/wl12xx/main.c     | 2 ++
 drivers/net/wireless/ti/wl12xx/wl12xx.h   | 1 +
 drivers/net/wireless/ti/wl18xx/main.c     | 2 ++
 drivers/net/wireless/ti/wl18xx/wl18xx.h   | 1 +
 drivers/net/wireless/ti/wlcore/main.c     | 4 +---
 drivers/net/wireless/ti/wlcore/wlcore.h   | 2 ++
 drivers/net/wireless/ti/wlcore/wlcore_i.h | 2 --
 7 files changed, 9 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c
index 69df5bc13dd2..f486f0f8becb 100644
--- a/drivers/net/wireless/ti/wl12xx/main.c
+++ b/drivers/net/wireless/ti/wl12xx/main.c
@@ -1750,11 +1750,13 @@ static int wl12xx_setup(struct wl1271 *wl)
 	struct wl12xx_platform_data *pdata = pdev_data->pdata;
 
 	BUILD_BUG_ON(WL12XX_MAX_LINKS > WLCORE_MAX_LINKS);
+	BUILD_BUG_ON(WL12XX_MAX_AP_STATIONS > WL12XX_MAX_LINKS);
 
 	wl->rtable = wl12xx_rtable;
 	wl->num_tx_desc = WL12XX_NUM_TX_DESCRIPTORS;
 	wl->num_rx_desc = WL12XX_NUM_RX_DESCRIPTORS;
 	wl->num_links = WL12XX_MAX_LINKS;
+	wl->max_ap_stations = WL12XX_MAX_AP_STATIONS;
 	wl->num_channels = 1;
 	wl->num_mac_addr = WL12XX_NUM_MAC_ADDRESSES;
 	wl->band_rate_to_idx = wl12xx_band_rate_to_idx;
diff --git a/drivers/net/wireless/ti/wl12xx/wl12xx.h b/drivers/net/wireless/ti/wl12xx/wl12xx.h
index 26b1a3f97485..75c92658bfea 100644
--- a/drivers/net/wireless/ti/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/ti/wl12xx/wl12xx.h
@@ -65,6 +65,7 @@
 
 #define WL12XX_RX_BA_MAX_SESSIONS 3
 
+#define WL12XX_MAX_AP_STATIONS 8
 #define WL12XX_MAX_LINKS 12
 
 struct wl127x_rx_mem_pool_addr {
diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c
index 6011b225fa17..f19e9b5af589 100644
--- a/drivers/net/wireless/ti/wl18xx/main.c
+++ b/drivers/net/wireless/ti/wl18xx/main.c
@@ -1753,11 +1753,13 @@ static int wl18xx_setup(struct wl1271 *wl)
 	int ret;
 
 	BUILD_BUG_ON(WL18XX_MAX_LINKS > WLCORE_MAX_LINKS);
+	BUILD_BUG_ON(WL18XX_MAX_AP_STATIONS > WL18XX_MAX_LINKS);
 
 	wl->rtable = wl18xx_rtable;
 	wl->num_tx_desc = WL18XX_NUM_TX_DESCRIPTORS;
 	wl->num_rx_desc = WL18XX_NUM_RX_DESCRIPTORS;
 	wl->num_links = WL18XX_MAX_LINKS;
+	wl->max_ap_stations = WL18XX_MAX_AP_STATIONS;
 	wl->num_channels = 2;
 	wl->num_mac_addr = WL18XX_NUM_MAC_ADDRESSES;
 	wl->band_rate_to_idx = wl18xx_band_rate_to_idx;
diff --git a/drivers/net/wireless/ti/wl18xx/wl18xx.h b/drivers/net/wireless/ti/wl18xx/wl18xx.h
index 38174e996d8a..9785bf87c666 100644
--- a/drivers/net/wireless/ti/wl18xx/wl18xx.h
+++ b/drivers/net/wireless/ti/wl18xx/wl18xx.h
@@ -42,6 +42,7 @@
 
 #define WL18XX_RX_BA_MAX_SESSIONS 5
 
+#define WL18XX_MAX_AP_STATIONS 8
 #define WL18XX_MAX_LINKS 12
 
 struct wl18xx_priv {
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index c35d1dce6751..b649726828f9 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -4662,7 +4662,7 @@ static int wl1271_allocate_sta(struct wl1271 *wl,
 	int ret;
 
 
-	if (wl->active_sta_count >= AP_MAX_STATIONS) {
+	if (wl->active_sta_count >= wl->max_ap_stations) {
 		wl1271_warning("could not allocate HLID - too much stations");
 		return -EBUSY;
 	}
@@ -5855,8 +5855,6 @@ struct ieee80211_hw *wlcore_alloc_hw(size_t priv_size, u32 aggr_buf_size,
 	int i, j, ret;
 	unsigned int order;
 
-	BUILD_BUG_ON(AP_MAX_STATIONS > WLCORE_MAX_LINKS);
-
 	hw = ieee80211_alloc_hw(sizeof(*wl), &wl1271_ops);
 	if (!hw) {
 		wl1271_error("could not alloc ieee80211_hw");
diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h
index 98b1875d6e91..2356bddc7cdb 100644
--- a/drivers/net/wireless/ti/wlcore/wlcore.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore.h
@@ -438,6 +438,8 @@ struct wl1271 {
 	u32 num_rx_desc;
 	/* number of links the HW supports */
 	u8 num_links;
+	/* max stations a single AP can support */
+	u8 max_ap_stations;
 
 	/* translate HW Tx rates to standard rate-indices */
 	const u8 **band_rate_to_idx;
diff --git a/drivers/net/wireless/ti/wlcore/wlcore_i.h b/drivers/net/wireless/ti/wlcore/wlcore_i.h
index 256d09b3d581..a53a37f2b45a 100644
--- a/drivers/net/wireless/ti/wlcore/wlcore_i.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore_i.h
@@ -123,8 +123,6 @@ struct wl1271_chip {
 
 #define NUM_TX_QUEUES              4
 
-#define AP_MAX_STATIONS            8
-
 struct wl_fw_status {
 	u32 intr;
 	u8  fw_rx_counter;
-- 
cgit v1.2.2


From abf0b24912640c4fa94b0a2f22ee9d51c8521b16 Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Mon, 10 Feb 2014 13:47:24 +0200
Subject: wlcore/wl12xx/wl18xx: configure iface_combinations per-hw

Each hw supports a different iface combinations.
Define the supported combinations in each driver,
and save it in wl->iface_combinations.

Since each driver defines its own combinations now,
it can also define its max supported channels, so
we no longer need to save and set it explicitly
in wlcore.

Update wl18xx interface combinations to allow
multiple APs.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ti/wl12xx/main.c   | 26 +++++++++++++++++++++-
 drivers/net/wireless/ti/wl18xx/main.c   | 39 ++++++++++++++++++++++++++++++++-
 drivers/net/wireless/ti/wlcore/main.c   | 28 ++---------------------
 drivers/net/wireless/ti/wlcore/wlcore.h |  5 +++--
 4 files changed, 68 insertions(+), 30 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c
index f486f0f8becb..33071a770630 100644
--- a/drivers/net/wireless/ti/wl12xx/main.c
+++ b/drivers/net/wireless/ti/wl12xx/main.c
@@ -1743,6 +1743,29 @@ static struct ieee80211_sta_ht_cap wl12xx_ht_cap = {
 		},
 };
 
+static const struct ieee80211_iface_limit wl12xx_iface_limits[] = {
+	{
+		.max = 3,
+		.types = BIT(NL80211_IFTYPE_STATION),
+	},
+	{
+		.max = 1,
+		.types = BIT(NL80211_IFTYPE_AP) |
+			 BIT(NL80211_IFTYPE_P2P_GO) |
+			 BIT(NL80211_IFTYPE_P2P_CLIENT),
+	},
+};
+
+static const struct ieee80211_iface_combination
+wl12xx_iface_combinations[] = {
+	{
+		.max_interfaces = 3,
+		.limits = wl12xx_iface_limits,
+		.n_limits = ARRAY_SIZE(wl12xx_iface_limits),
+		.num_different_channels = 1,
+	},
+};
+
 static int wl12xx_setup(struct wl1271 *wl)
 {
 	struct wl12xx_priv *priv = wl->priv;
@@ -1757,7 +1780,8 @@ static int wl12xx_setup(struct wl1271 *wl)
 	wl->num_rx_desc = WL12XX_NUM_RX_DESCRIPTORS;
 	wl->num_links = WL12XX_MAX_LINKS;
 	wl->max_ap_stations = WL12XX_MAX_AP_STATIONS;
-	wl->num_channels = 1;
+	wl->iface_combinations = wl12xx_iface_combinations;
+	wl->n_iface_combinations = ARRAY_SIZE(wl12xx_iface_combinations);
 	wl->num_mac_addr = WL12XX_NUM_MAC_ADDRESSES;
 	wl->band_rate_to_idx = wl12xx_band_rate_to_idx;
 	wl->hw_tx_rate_tbl_size = WL12XX_CONF_HW_RXTX_RATE_MAX;
diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c
index f19e9b5af589..966a866d76f0 100644
--- a/drivers/net/wireless/ti/wl18xx/main.c
+++ b/drivers/net/wireless/ti/wl18xx/main.c
@@ -1747,6 +1747,42 @@ static struct ieee80211_sta_ht_cap wl18xx_mimo_ht_cap_2ghz = {
 		},
 };
 
+static const struct ieee80211_iface_limit wl18xx_iface_limits[] = {
+	{
+		.max = 3,
+		.types = BIT(NL80211_IFTYPE_STATION),
+	},
+	{
+		.max = 1,
+		.types = BIT(NL80211_IFTYPE_AP) |
+			 BIT(NL80211_IFTYPE_P2P_GO) |
+			 BIT(NL80211_IFTYPE_P2P_CLIENT),
+	},
+};
+
+static const struct ieee80211_iface_limit wl18xx_iface_ap_limits[] = {
+	{
+		.max = 2,
+		.types = BIT(NL80211_IFTYPE_AP),
+	},
+};
+
+static const struct ieee80211_iface_combination
+wl18xx_iface_combinations[] = {
+	{
+		.max_interfaces = 3,
+		.limits = wl18xx_iface_limits,
+		.n_limits = ARRAY_SIZE(wl18xx_iface_limits),
+		.num_different_channels = 2,
+	},
+	{
+		.max_interfaces = 2,
+		.limits = wl18xx_iface_ap_limits,
+		.n_limits = ARRAY_SIZE(wl18xx_iface_ap_limits),
+		.num_different_channels = 1,
+	}
+};
+
 static int wl18xx_setup(struct wl1271 *wl)
 {
 	struct wl18xx_priv *priv = wl->priv;
@@ -1760,7 +1796,8 @@ static int wl18xx_setup(struct wl1271 *wl)
 	wl->num_rx_desc = WL18XX_NUM_RX_DESCRIPTORS;
 	wl->num_links = WL18XX_MAX_LINKS;
 	wl->max_ap_stations = WL18XX_MAX_AP_STATIONS;
-	wl->num_channels = 2;
+	wl->iface_combinations = wl18xx_iface_combinations;
+	wl->n_iface_combinations = ARRAY_SIZE(wl18xx_iface_combinations);
 	wl->num_mac_addr = WL18XX_NUM_MAC_ADDRESSES;
 	wl->band_rate_to_idx = wl18xx_band_rate_to_idx;
 	wl->hw_tx_rate_tbl_size = WL18XX_CONF_HW_RXTX_RATE_MAX;
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index b649726828f9..d16fb7e0eb98 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -5690,28 +5690,6 @@ static void wl1271_unregister_hw(struct wl1271 *wl)
 
 }
 
-static const struct ieee80211_iface_limit wlcore_iface_limits[] = {
-	{
-		.max = 3,
-		.types = BIT(NL80211_IFTYPE_STATION),
-	},
-	{
-		.max = 1,
-		.types = BIT(NL80211_IFTYPE_AP) |
-			 BIT(NL80211_IFTYPE_P2P_GO) |
-			 BIT(NL80211_IFTYPE_P2P_CLIENT),
-	},
-};
-
-static struct ieee80211_iface_combination
-wlcore_iface_combinations[] = {
-	{
-	  .max_interfaces = 3,
-	  .limits = wlcore_iface_limits,
-	  .n_limits = ARRAY_SIZE(wlcore_iface_limits),
-	},
-};
-
 static int wl1271_init_ieee80211(struct wl1271 *wl)
 {
 	int i;
@@ -5832,10 +5810,8 @@ static int wl1271_init_ieee80211(struct wl1271 *wl)
 		NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P;
 
 	/* allowed interface combinations */
-	wlcore_iface_combinations[0].num_different_channels = wl->num_channels;
-	wl->hw->wiphy->iface_combinations = wlcore_iface_combinations;
-	wl->hw->wiphy->n_iface_combinations =
-		ARRAY_SIZE(wlcore_iface_combinations);
+	wl->hw->wiphy->iface_combinations = wl->iface_combinations;
+	wl->hw->wiphy->n_iface_combinations = wl->n_iface_combinations;
 
 	SET_IEEE80211_DEV(wl->hw, wl->dev);
 
diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h
index 2356bddc7cdb..a1cc1c639fd6 100644
--- a/drivers/net/wireless/ti/wlcore/wlcore.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore.h
@@ -483,8 +483,9 @@ struct wl1271 {
 
 	struct completion nvs_loading_complete;
 
-	/* number of concurrent channels the HW supports */
-	u32 num_channels;
+	/* interface combinations supported by the hw */
+	const struct ieee80211_iface_combination *iface_combinations;
+	u8 n_iface_combinations;
 };
 
 int wlcore_probe(struct wl1271 *wl, struct platform_device *pdev);
-- 
cgit v1.2.2


From 028e7243ac411c3aba7a754bcc775c2fbb0b3e5c Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Mon, 10 Feb 2014 13:47:25 +0200
Subject: wl18xx: move to new firmware (wl18xx-fw-3.bin)

Bump the min wl18xx fw version to 8.8.0.0.13

This fw is not backward compatible with older
firmware (due to api changes), so use bump
the firmware name as well.

Some modifications were done to the driver-fw api
in order to support multiple APs.

Additionally, some of the consts (such as max stations,
max links and max RX BA sessions) were changed.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ti/wl18xx/main.c     |  2 +-
 drivers/net/wireless/ti/wl18xx/wl18xx.h   | 10 +++++-----
 drivers/net/wireless/ti/wlcore/acx.c      |  4 +++-
 drivers/net/wireless/ti/wlcore/acx.h      |  6 ++++--
 drivers/net/wireless/ti/wlcore/cmd.c      |  5 ++++-
 drivers/net/wireless/ti/wlcore/cmd.h      |  7 +++++--
 drivers/net/wireless/ti/wlcore/main.c     |  2 +-
 drivers/net/wireless/ti/wlcore/tx.c       |  2 +-
 drivers/net/wireless/ti/wlcore/wlcore_i.h |  2 +-
 9 files changed, 25 insertions(+), 15 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c
index 966a866d76f0..de5b4fa5d166 100644
--- a/drivers/net/wireless/ti/wl18xx/main.c
+++ b/drivers/net/wireless/ti/wl18xx/main.c
@@ -648,7 +648,7 @@ static const struct wl18xx_clk_cfg wl18xx_clk_table[NUM_CLOCK_CONFIGS] = {
 };
 
 /* TODO: maybe move to a new header file? */
-#define WL18XX_FW_NAME "ti-connectivity/wl18xx-fw-2.bin"
+#define WL18XX_FW_NAME "ti-connectivity/wl18xx-fw-3.bin"
 
 static int wl18xx_identify_chip(struct wl1271 *wl)
 {
diff --git a/drivers/net/wireless/ti/wl18xx/wl18xx.h b/drivers/net/wireless/ti/wl18xx/wl18xx.h
index 9785bf87c666..eb7cfe817010 100644
--- a/drivers/net/wireless/ti/wl18xx/wl18xx.h
+++ b/drivers/net/wireless/ti/wl18xx/wl18xx.h
@@ -26,10 +26,10 @@
 
 /* minimum FW required for driver */
 #define WL18XX_CHIP_VER		8
-#define WL18XX_IFTYPE_VER	5
+#define WL18XX_IFTYPE_VER	8
 #define WL18XX_MAJOR_VER	WLCORE_FW_VER_IGNORE
 #define WL18XX_SUBTYPE_VER	WLCORE_FW_VER_IGNORE
-#define WL18XX_MINOR_VER	39
+#define WL18XX_MINOR_VER	13
 
 #define WL18XX_CMD_MAX_SIZE          740
 
@@ -40,10 +40,10 @@
 
 #define WL18XX_NUM_MAC_ADDRESSES 3
 
-#define WL18XX_RX_BA_MAX_SESSIONS 5
+#define WL18XX_RX_BA_MAX_SESSIONS 13
 
-#define WL18XX_MAX_AP_STATIONS 8
-#define WL18XX_MAX_LINKS 12
+#define WL18XX_MAX_AP_STATIONS 10
+#define WL18XX_MAX_LINKS 16
 
 struct wl18xx_priv {
 	/* buffer for sending commands to FW */
diff --git a/drivers/net/wireless/ti/wlcore/acx.c b/drivers/net/wireless/ti/wlcore/acx.c
index ec83675a2446..71b244b7ab7f 100644
--- a/drivers/net/wireless/ti/wlcore/acx.c
+++ b/drivers/net/wireless/ti/wlcore/acx.c
@@ -1591,7 +1591,8 @@ out:
 	return ret;
 }
 
-int wl1271_acx_set_inconnection_sta(struct wl1271 *wl, u8 *addr)
+int wl1271_acx_set_inconnection_sta(struct wl1271 *wl,
+				    struct wl12xx_vif *wlvif, u8 *addr)
 {
 	struct wl1271_acx_inconnection_sta *acx = NULL;
 	int ret;
@@ -1603,6 +1604,7 @@ int wl1271_acx_set_inconnection_sta(struct wl1271 *wl, u8 *addr)
 		return -ENOMEM;
 
 	memcpy(acx->addr, addr, ETH_ALEN);
+	acx->role_id = wlvif->role_id;
 
 	ret = wl1271_cmd_configure(wl, ACX_UPDATE_INCONNECTION_STA_LIST,
 				   acx, sizeof(*acx));
diff --git a/drivers/net/wireless/ti/wlcore/acx.h b/drivers/net/wireless/ti/wlcore/acx.h
index 6dcfad9b0472..954d57ec98f4 100644
--- a/drivers/net/wireless/ti/wlcore/acx.h
+++ b/drivers/net/wireless/ti/wlcore/acx.h
@@ -824,7 +824,8 @@ struct wl1271_acx_inconnection_sta {
 	struct acx_header header;
 
 	u8 addr[ETH_ALEN];
-	u8 padding1[2];
+	u8 role_id;
+	u8 padding;
 } __packed;
 
 /*
@@ -1118,7 +1119,8 @@ int wl1271_acx_ps_rx_streaming(struct wl1271 *wl, struct wl12xx_vif *wlvif,
 			       bool enable);
 int wl1271_acx_ap_max_tx_retry(struct wl1271 *wl, struct wl12xx_vif *wlvif);
 int wl12xx_acx_config_ps(struct wl1271 *wl, struct wl12xx_vif *wlvif);
-int wl1271_acx_set_inconnection_sta(struct wl1271 *wl, u8 *addr);
+int wl1271_acx_set_inconnection_sta(struct wl1271 *wl,
+				    struct wl12xx_vif *wlvif, u8 *addr);
 int wl1271_acx_fm_coex(struct wl1271 *wl);
 int wl12xx_acx_set_rate_mgmt_params(struct wl1271 *wl);
 int wl12xx_acx_config_hangover(struct wl1271 *wl);
diff --git a/drivers/net/wireless/ti/wlcore/cmd.c b/drivers/net/wireless/ti/wlcore/cmd.c
index ab5ca32dd3d1..3463a67d1c0d 100644
--- a/drivers/net/wireless/ti/wlcore/cmd.c
+++ b/drivers/net/wireless/ti/wlcore/cmd.c
@@ -1532,6 +1532,7 @@ int wl12xx_cmd_add_peer(struct wl1271 *wl, struct wl12xx_vif *wlvif,
 	cmd->sp_len = sta->max_sp;
 	cmd->wmm = sta->wme ? 1 : 0;
 	cmd->session_id = wl->session_ids[hlid];
+	cmd->role_id = wlvif->role_id;
 
 	for (i = 0; i < NUM_ACCESS_CATEGORIES_COPY; i++)
 		if (sta->wme && (sta->uapsd_queues & BIT(i)))
@@ -1568,7 +1569,8 @@ out:
 	return ret;
 }
 
-int wl12xx_cmd_remove_peer(struct wl1271 *wl, u8 hlid)
+int wl12xx_cmd_remove_peer(struct wl1271 *wl, struct wl12xx_vif *wlvif,
+			   u8 hlid)
 {
 	struct wl12xx_cmd_remove_peer *cmd;
 	int ret;
@@ -1586,6 +1588,7 @@ int wl12xx_cmd_remove_peer(struct wl1271 *wl, u8 hlid)
 	/* We never send a deauth, mac80211 is in charge of this */
 	cmd->reason_opcode = 0;
 	cmd->send_deauth_flag = 0;
+	cmd->role_id = wlvif->role_id;
 
 	ret = wl1271_cmd_send(wl, CMD_REMOVE_PEER, cmd, sizeof(*cmd), 0);
 	if (ret < 0) {
diff --git a/drivers/net/wireless/ti/wlcore/cmd.h b/drivers/net/wireless/ti/wlcore/cmd.h
index 323d4a856e4b..9cb3f44bc76c 100644
--- a/drivers/net/wireless/ti/wlcore/cmd.h
+++ b/drivers/net/wireless/ti/wlcore/cmd.h
@@ -88,7 +88,8 @@ int wl12xx_roc(struct wl1271 *wl, struct wl12xx_vif *wlvif, u8 role_id,
 int wl12xx_croc(struct wl1271 *wl, u8 role_id);
 int wl12xx_cmd_add_peer(struct wl1271 *wl, struct wl12xx_vif *wlvif,
 			struct ieee80211_sta *sta, u8 hlid);
-int wl12xx_cmd_remove_peer(struct wl1271 *wl, u8 hlid);
+int wl12xx_cmd_remove_peer(struct wl1271 *wl, struct wl12xx_vif *wlvif,
+			   u8 hlid);
 void wlcore_set_pending_regdomain_ch(struct wl1271 *wl, u16 channel,
 				     enum ieee80211_band band);
 int wlcore_cmd_regdomain_config_locked(struct wl1271 *wl);
@@ -594,6 +595,8 @@ struct wl12xx_cmd_add_peer {
 	u8 sp_len;
 	u8 wmm;
 	u8 session_id;
+	u8 role_id;
+	u8 padding[3];
 } __packed;
 
 struct wl12xx_cmd_remove_peer {
@@ -602,7 +605,7 @@ struct wl12xx_cmd_remove_peer {
 	u8 hlid;
 	u8 reason_opcode;
 	u8 send_deauth_flag;
-	u8 padding1;
+	u8 role_id;
 } __packed;
 
 /*
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index d16fb7e0eb98..73bf251aeaa4 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -4765,7 +4765,7 @@ static int wl12xx_sta_remove(struct wl1271 *wl,
 	if (WARN_ON(!test_bit(id, wlvif->ap.sta_hlid_map)))
 		return -EINVAL;
 
-	ret = wl12xx_cmd_remove_peer(wl, wl_sta->hlid);
+	ret = wl12xx_cmd_remove_peer(wl, wlvif, wl_sta->hlid);
 	if (ret < 0)
 		return ret;
 
diff --git a/drivers/net/wireless/ti/wlcore/tx.c b/drivers/net/wireless/ti/wlcore/tx.c
index 06ab5c6d6bef..9f7921d98036 100644
--- a/drivers/net/wireless/ti/wlcore/tx.c
+++ b/drivers/net/wireless/ti/wlcore/tx.c
@@ -101,7 +101,7 @@ static void wl1271_tx_ap_update_inconnection_sta(struct wl1271 *wl,
 	 * authentication response. this way it won't get de-authed by FW
 	 * when transmitting too soon.
 	 */
-	wl1271_acx_set_inconnection_sta(wl, hdr->addr1);
+	wl1271_acx_set_inconnection_sta(wl, wlvif, hdr->addr1);
 
 	/*
 	 * ROC for 1 second on the AP channel for completing the connection.
diff --git a/drivers/net/wireless/ti/wlcore/wlcore_i.h b/drivers/net/wireless/ti/wlcore/wlcore_i.h
index a53a37f2b45a..756e890bc5ee 100644
--- a/drivers/net/wireless/ti/wlcore/wlcore_i.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore_i.h
@@ -65,7 +65,7 @@
  * max number of links allowed by all HWs.
  * this is NOT the actual max links supported by the current hw.
  */
-#define WLCORE_MAX_LINKS 12
+#define WLCORE_MAX_LINKS 16
 
 /* the driver supports the 2.4Ghz and 5Ghz bands */
 #define WLCORE_NUM_BANDS           2
-- 
cgit v1.2.2


From 2a5ad92e271e518281504eeeab1dd311351ff7b7 Mon Sep 17 00:00:00 2001
From: Igal Chernobelsky <igalc@ti.com>
Date: Mon, 10 Feb 2014 13:47:26 +0200
Subject: wlcore: send EAPOL frames with voice priority

Send EAPOL frames with voice priority by setting (the new)
TX_HW_ATTR_EAPOL_FRAME bit in tx attribute.

Sending EAPOL with voice priority fixes re-key
timeout issues during heavy traffic.

Signed-off-by: Igal Chernobelsky <igalc@ti.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ti/wlcore/tx.c | 4 ++++
 drivers/net/wireless/ti/wlcore/tx.h | 1 +
 2 files changed, 5 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ti/wlcore/tx.c b/drivers/net/wireless/ti/wlcore/tx.c
index 9f7921d98036..38b31a0e9687 100644
--- a/drivers/net/wireless/ti/wlcore/tx.c
+++ b/drivers/net/wireless/ti/wlcore/tx.c
@@ -362,6 +362,10 @@ static void wl1271_tx_fill_hdr(struct wl1271 *wl, struct wl12xx_vif *wlvif,
 	    ieee80211_has_protected(frame_control))
 		tx_attr |= TX_HW_ATTR_HOST_ENCRYPT;
 
+	/* send EAPOL frames as voice */
+	if (control->control.flags & IEEE80211_TX_CTRL_PORT_CTRL_PROTO)
+		tx_attr |= TX_HW_ATTR_EAPOL_FRAME;
+
 	desc->tx_attr = cpu_to_le16(tx_attr);
 
 	wlcore_hw_set_tx_desc_csum(wl, desc, skb);
diff --git a/drivers/net/wireless/ti/wlcore/tx.h b/drivers/net/wireless/ti/wlcore/tx.h
index 35489c300da1..79cb3ff8b71f 100644
--- a/drivers/net/wireless/ti/wlcore/tx.h
+++ b/drivers/net/wireless/ti/wlcore/tx.h
@@ -37,6 +37,7 @@
 #define TX_HW_ATTR_TX_CMPLT_REQ          BIT(12)
 #define TX_HW_ATTR_TX_DUMMY_REQ          BIT(13)
 #define TX_HW_ATTR_HOST_ENCRYPT          BIT(14)
+#define TX_HW_ATTR_EAPOL_FRAME           BIT(15)
 
 #define TX_HW_ATTR_OFST_SAVE_RETRIES     0
 #define TX_HW_ATTR_OFST_HEADER_PAD       1
-- 
cgit v1.2.2


From 5a441f5ff75daf9c3c6657a66e2806a1255f5b84 Mon Sep 17 00:00:00 2001
From: Barak Bercovitz <barak@wizery.com>
Date: Mon, 10 Feb 2014 13:47:27 +0200
Subject: wlcore: don't stop sched_scan on interface removal

Stopping sched scan on interface removal (during recovery)
is no longer needed, as sched scanning is automatically
restarted by mac80211.

Signed-off-by: Barak Bercovitz <barak@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ti/wlcore/main.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 73bf251aeaa4..bea2938ebbc8 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -2582,10 +2582,8 @@ static void __wl1271_op_remove_interface(struct wl1271 *wl,
 		ieee80211_scan_completed(wl->hw, true);
 	}
 
-	if (wl->sched_vif == wlvif) {
-		ieee80211_sched_scan_stopped(wl->hw);
+	if (wl->sched_vif == wlvif)
 		wl->sched_vif = NULL;
-	}
 
 	if (wl->roc_vif == vif) {
 		wl->roc_vif = NULL;
-- 
cgit v1.2.2


From bc566f9203c2813a2e083677eb99c62b1cb14d03 Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Mon, 10 Feb 2014 13:47:28 +0200
Subject: wlcore: wl18xx: allow CCK rates for AP mode

12xx chips allow only OFDM rates in AP mode for BT-Coex purposes. This
is no longer required in 18xx chips, starting with FW 8.6.0.0.8.

Update the min allowed FW version in 18xx to support this functionality.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ti/wl12xx/main.c   | 1 +
 drivers/net/wireless/ti/wlcore/init.c   | 2 +-
 drivers/net/wireless/ti/wlcore/wlcore.h | 3 +++
 3 files changed, 5 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c
index 33071a770630..d50dfac91631 100644
--- a/drivers/net/wireless/ti/wl12xx/main.c
+++ b/drivers/net/wireless/ti/wl12xx/main.c
@@ -1789,6 +1789,7 @@ static int wl12xx_setup(struct wl1271 *wl)
 	wl->fw_status_len = sizeof(struct wl12xx_fw_status);
 	wl->fw_status_priv_len = 0;
 	wl->stats.fw_stats_len = sizeof(struct wl12xx_acx_statistics);
+	wl->ofdm_only_ap = true;
 	wlcore_set_ht_cap(wl, IEEE80211_BAND_2GHZ, &wl12xx_ht_cap);
 	wlcore_set_ht_cap(wl, IEEE80211_BAND_5GHZ, &wl12xx_ht_cap);
 	wl12xx_conf_init(wl);
diff --git a/drivers/net/wireless/ti/wlcore/init.c b/drivers/net/wireless/ti/wlcore/init.c
index 7699f9d07e26..b376c996c0a7 100644
--- a/drivers/net/wireless/ti/wlcore/init.c
+++ b/drivers/net/wireless/ti/wlcore/init.c
@@ -462,7 +462,7 @@ int wl1271_init_ap_rates(struct wl1271 *wl, struct wl12xx_vif *wlvif)
 	 * If the basic rates contain OFDM rates, use OFDM only
 	 * rates for unicast TX as well. Else use all supported rates.
 	 */
-	if ((wlvif->basic_rate_set & CONF_TX_OFDM_RATES))
+	if (wl->ofdm_only_ap && (wlvif->basic_rate_set & CONF_TX_OFDM_RATES))
 		supported_rates = CONF_TX_OFDM_RATES;
 	else
 		supported_rates = CONF_TX_ENABLED_RATES;
diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h
index a1cc1c639fd6..95a54504f0cc 100644
--- a/drivers/net/wireless/ti/wlcore/wlcore.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore.h
@@ -407,6 +407,9 @@ struct wl1271 {
 	/* AP-mode - number of currently connected stations */
 	int active_sta_count;
 
+	/* Flag determining whether AP should broadcast OFDM-only rates */
+	bool ofdm_only_ap;
+
 	/* last wlvif we transmitted from */
 	struct wl12xx_vif *last_wlvif;
 
-- 
cgit v1.2.2


From bf4e5f1ac0e2b277424ec0d035b1fbab46dd66bb Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Mon, 10 Feb 2014 13:47:29 +0200
Subject: wlcore: don't handle unsetting of default wep key

mac80211 unsets the default wep key on disassoc.
The fw doesn't support this notification, so simply
ignore it.

The actual flow actually triggers fw recovery in some
cases, as mac80211 unsets the default key only after
disassoc, when wlvif->sta.hlid, resulting in invalid
hlid being passed to the fw.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ti/wlcore/main.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index bea2938ebbc8..d80d40cf7a22 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -3472,6 +3472,10 @@ static void wl1271_op_set_default_key_idx(struct ieee80211_hw *hw,
 	wl1271_debug(DEBUG_MAC80211, "mac80211 set default key idx %d",
 		     key_idx);
 
+	/* we don't handle unsetting of default key */
+	if (key_idx == -1)
+		return;
+
 	mutex_lock(&wl->mutex);
 
 	if (unlikely(wl->state != WLCORE_STATE_ON)) {
-- 
cgit v1.2.2


From 41ed1a787c4940d58d5870c633ab6291dd4679dd Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Mon, 10 Feb 2014 13:47:30 +0200
Subject: wlcore: consider multiple APs when checking active_link_count

Each AP has its own global and broadcast links, so when
checking for active sta count (according to the active_link_count)
we must take them all into account.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ti/wlcore/main.c | 10 +++++-----
 drivers/net/wireless/ti/wlcore/tx.c   | 10 +++++-----
 2 files changed, 10 insertions(+), 10 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index d80d40cf7a22..8106c96fe6b7 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -345,12 +345,12 @@ static void wl12xx_irq_ps_regulate_link(struct wl1271 *wl,
 	 * Start high-level PS if the STA is asleep with enough blocks in FW.
 	 * Make an exception if this is the only connected link. In this
 	 * case FW-memory congestion is less of a problem.
-	 * Note that a single connected STA means 3 active links, since we must
-	 * account for the global and broadcast AP links. The "fw_ps" check
-	 * assures us the third link is a STA connected to the AP. Otherwise
-	 * the FW would not set the PSM bit.
+	 * Note that a single connected STA means 2*ap_count + 1 active links,
+	 * since we must account for the global and broadcast AP links
+	 * for each AP. The "fw_ps" check assures us the other link is a STA
+	 * connected to the AP. Otherwise the FW would not set the PSM bit.
 	 */
-	else if (wl->active_link_count > 3 && fw_ps &&
+	else if (wl->active_link_count > (wl->ap_count*2 + 1) && fw_ps &&
 		 tx_pkts >= WL1271_PS_STA_MAX_PACKETS)
 		wl12xx_ps_link_start(wl, wlvif, hlid, true);
 }
diff --git a/drivers/net/wireless/ti/wlcore/tx.c b/drivers/net/wireless/ti/wlcore/tx.c
index 38b31a0e9687..40b43115f835 100644
--- a/drivers/net/wireless/ti/wlcore/tx.c
+++ b/drivers/net/wireless/ti/wlcore/tx.c
@@ -134,12 +134,12 @@ static void wl1271_tx_regulate_link(struct wl1271 *wl,
 	 * into high-level PS and clean out its TX queues.
 	 * Make an exception if this is the only connected link. In this
 	 * case FW-memory congestion is less of a problem.
-	 * Note that a single connected STA means 3 active links, since we must
-	 * account for the global and broadcast AP links. The "fw_ps" check
-	 * assures us the third link is a STA connected to the AP. Otherwise
-	 * the FW would not set the PSM bit.
+	 * Note that a single connected STA means 2*ap_count + 1 active links,
+	 * since we must account for the global and broadcast AP links
+	 * for each AP. The "fw_ps" check assures us the other link is a STA
+	 * connected to the AP. Otherwise the FW would not set the PSM bit.
 	 */
-	if (wl->active_link_count > 3 && fw_ps &&
+	if (wl->active_link_count > (wl->ap_count*2 + 1) && fw_ps &&
 	    tx_pkts >= WL1271_PS_STA_MAX_PACKETS)
 		wl12xx_ps_link_start(wl, wlvif, hlid, true);
 }
-- 
cgit v1.2.2


From 1ede95007371c27729383c8977e04abf63874ea8 Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Mon, 10 Feb 2014 13:47:31 +0200
Subject: wlcore: decrease warning verbosity during recovery

Silently ignore repetitive scheduling of recovery work and commands
being passed to the bus when the HW is not available. This can happen
many times during recovery and slow it down. It also spams the kernel
logs.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ti/wlcore/cmd.c  | 4 ++--
 drivers/net/wireless/ti/wlcore/main.c | 5 +++--
 2 files changed, 5 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ti/wlcore/cmd.c b/drivers/net/wireless/ti/wlcore/cmd.c
index 3463a67d1c0d..40dc30f4faaa 100644
--- a/drivers/net/wireless/ti/wlcore/cmd.c
+++ b/drivers/net/wireless/ti/wlcore/cmd.c
@@ -60,8 +60,8 @@ static int __wlcore_cmd_send(struct wl1271 *wl, u16 id, void *buf,
 	u16 status;
 	u16 poll_count = 0;
 
-	if (WARN_ON(wl->state == WLCORE_STATE_RESTARTING &&
-		    id != CMD_STOP_FWLOGGER))
+	if (unlikely(wl->state == WLCORE_STATE_RESTARTING &&
+		     id != CMD_STOP_FWLOGGER))
 		return -EIO;
 
 	cmd = buf;
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 8106c96fe6b7..a2348b951738 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -782,10 +782,11 @@ out:
 
 void wl12xx_queue_recovery_work(struct wl1271 *wl)
 {
-	WARN_ON(!test_bit(WL1271_FLAG_INTENDED_FW_RECOVERY, &wl->flags));
-
 	/* Avoid a recursive recovery */
 	if (wl->state == WLCORE_STATE_ON) {
+		WARN_ON(!test_bit(WL1271_FLAG_INTENDED_FW_RECOVERY,
+				  &wl->flags));
+
 		wl->state = WLCORE_STATE_RESTARTING;
 		set_bit(WL1271_FLAG_RECOVERY_IN_PROGRESS, &wl->flags);
 		wl1271_ps_elp_wakeup(wl);
-- 
cgit v1.2.2


From 5b07d97a381508dfc79bda72778ac27c1bdba320 Mon Sep 17 00:00:00 2001
From: Yaniv Machani <yanivma@ti.com>
Date: Mon, 10 Feb 2014 13:47:32 +0200
Subject: wlcore: increase timeout to 5000 msecs

dfs configuration command might take longer than
the current timeout. increase it to 5 seconds.

Signed-off-by: Yaniv Machani <yanivma@ti.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ti/wlcore/cmd.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ti/wlcore/cmd.h b/drivers/net/wireless/ti/wlcore/cmd.h
index 9cb3f44bc76c..b084830a61cf 100644
--- a/drivers/net/wireless/ti/wlcore/cmd.h
+++ b/drivers/net/wireless/ti/wlcore/cmd.h
@@ -207,7 +207,7 @@ enum cmd_templ {
 #define WL1271_COMMAND_TIMEOUT     2000
 #define WL1271_CMD_TEMPL_DFLT_SIZE 252
 #define WL1271_CMD_TEMPL_MAX_SIZE  512
-#define WL1271_EVENT_TIMEOUT       1500
+#define WL1271_EVENT_TIMEOUT       5000
 
 struct wl1271_cmd_header {
 	__le16 id;
-- 
cgit v1.2.2


From d881fa2c5032918e2b03ce6e12a5886f08acb459 Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Mon, 10 Feb 2014 13:47:33 +0200
Subject: wlcore: enable beacon filtering only after receiving a beacon

Enabling beacon filtering before receving a beacon
might result in not having a beacon at all for the
current connected AP, which prevents the station
from entering power-save.

Replace the current approach (of starting beacon
filtering on init) and configure beacon filering
only after bss_conf->dtimper is set (which means
mac80211 already parsed a beacon).

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ti/wlcore/acx.c  |  3 ++-
 drivers/net/wireless/ti/wlcore/init.c |  4 ++--
 drivers/net/wireless/ti/wlcore/main.c | 12 ++++++++++++
 3 files changed, 16 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ti/wlcore/acx.c b/drivers/net/wireless/ti/wlcore/acx.c
index 71b244b7ab7f..b924ceadc02c 100644
--- a/drivers/net/wireless/ti/wlcore/acx.c
+++ b/drivers/net/wireless/ti/wlcore/acx.c
@@ -358,7 +358,8 @@ int wl1271_acx_beacon_filter_opt(struct wl1271 *wl, struct wl12xx_vif *wlvif,
 	struct acx_beacon_filter_option *beacon_filter = NULL;
 	int ret = 0;
 
-	wl1271_debug(DEBUG_ACX, "acx beacon filter opt");
+	wl1271_debug(DEBUG_ACX, "acx beacon filter opt enable=%d",
+		     enable_filter);
 
 	if (enable_filter &&
 	    wl->conf.conn.bcn_filt_mode == CONF_BCN_FILT_MODE_DISABLED)
diff --git a/drivers/net/wireless/ti/wlcore/init.c b/drivers/net/wireless/ti/wlcore/init.c
index b376c996c0a7..199e94120864 100644
--- a/drivers/net/wireless/ti/wlcore/init.c
+++ b/drivers/net/wireless/ti/wlcore/init.c
@@ -287,8 +287,8 @@ static int wl1271_init_sta_beacon_filter(struct wl1271 *wl,
 	if (ret < 0)
 		return ret;
 
-	/* enable beacon filtering */
-	ret = wl1271_acx_beacon_filter_opt(wl, wlvif, true);
+	/* disable beacon filtering until we get the first beacon */
+	ret = wl1271_acx_beacon_filter_opt(wl, wlvif, false);
 	if (ret < 0)
 		return ret;
 
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index a2348b951738..82d546155f45 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -2941,6 +2941,11 @@ static int wlcore_unset_assoc(struct wl1271 *wl, struct wl12xx_vif *wlvif)
 		ret = wl1271_acx_keep_alive_mode(wl, wlvif, false);
 		if (ret < 0)
 			return ret;
+
+		/* disable beacon filtering */
+		ret = wl1271_acx_beacon_filter_opt(wl, wlvif, false);
+		if (ret < 0)
+			return ret;
 	}
 
 	if (test_and_clear_bit(WLVIF_FLAG_CS_PROGRESS, &wlvif->flags)) {
@@ -4312,6 +4317,13 @@ static void wl1271_bss_info_changed_sta(struct wl1271 *wl,
 		}
 	}
 
+	if ((changed & BSS_CHANGED_BEACON_INFO) && bss_conf->dtim_period) {
+		/* enable beacon filtering */
+		ret = wl1271_acx_beacon_filter_opt(wl, wlvif, true);
+		if (ret < 0)
+			goto out;
+	}
+
 	ret = wl1271_bss_erp_info_changed(wl, vif, bss_conf, changed);
 	if (ret < 0)
 		goto out;
-- 
cgit v1.2.2


From 6b27fe51675fd462967b824f63c5c009e9616363 Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Mon, 10 Feb 2014 13:47:34 +0200
Subject: wlcore: add support for STA CSA with chan contexts

TI wl12xx/wl18xx cards support channel switch via a driver specific
switch_channel op while operating with channel contexts.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ti/wlcore/main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 82d546155f45..7aae5b3a0c2c 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -5737,7 +5737,8 @@ static int wl1271_init_ieee80211(struct wl1271 *wl)
 		IEEE80211_HW_AP_LINK_PS |
 		IEEE80211_HW_AMPDU_AGGREGATION |
 		IEEE80211_HW_TX_AMPDU_SETUP_IN_HW |
-		IEEE80211_HW_QUEUE_CONTROL;
+		IEEE80211_HW_QUEUE_CONTROL |
+		IEEE80211_HW_CHANCTX_STA_CSA;
 
 	wl->hw->wiphy->cipher_suites = cipher_suites;
 	wl->hw->wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites);
-- 
cgit v1.2.2


From 08762322c3de33d933906c36e7b47bb6624dd35c Mon Sep 17 00:00:00 2001
From: Pontus Fuchs <pontus.fuchs@gmail.com>
Date: Wed, 12 Feb 2014 19:04:40 +0000
Subject: wcn36xx: Fix copy paste error hal_exit_bmps -> hal_keep_alive

Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wcn36xx/smd.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c
index 750626b0e22d..8a57dfe6c6e8 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.c
+++ b/drivers/net/wireless/ath/wcn36xx/smd.c
@@ -1637,12 +1637,12 @@ int wcn36xx_smd_keep_alive_req(struct wcn36xx *wcn,
 
 	ret = wcn36xx_smd_send_and_wait(wcn, msg_body.header.len);
 	if (ret) {
-		wcn36xx_err("Sending hal_exit_bmps failed\n");
+		wcn36xx_err("Sending hal_keep_alive failed\n");
 		goto out;
 	}
 	ret = wcn36xx_smd_rsp_status_check(wcn->hal_buf, wcn->hal_rsp_len);
 	if (ret) {
-		wcn36xx_err("hal_exit_bmps response failed err=%d\n", ret);
+		wcn36xx_err("hal_keep_alive response failed err=%d\n", ret);
 		goto out;
 	}
 out:
-- 
cgit v1.2.2


From c951da4615ced074c15f57884db8d96821249ae2 Mon Sep 17 00:00:00 2001
From: Pontus Fuchs <pontus.fuchs@gmail.com>
Date: Wed, 12 Feb 2014 19:04:41 +0000
Subject: wcn36xx: Improve feature caps exchange

* Response format is not in the canonical format.
  wcn36xx_smd_rsp_status_check cannot be used.

* Save the FW caps in wcn36xx struct for later use.

Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wcn36xx/hal.h     |  4 +++-
 drivers/net/wireless/ath/wcn36xx/smd.c     | 15 +++++++++------
 drivers/net/wireless/ath/wcn36xx/wcn36xx.h |  1 +
 3 files changed, 13 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/wcn36xx/hal.h b/drivers/net/wireless/ath/wcn36xx/hal.h
index 3c2ef0c32f72..a1f1127d7808 100644
--- a/drivers/net/wireless/ath/wcn36xx/hal.h
+++ b/drivers/net/wireless/ath/wcn36xx/hal.h
@@ -4384,11 +4384,13 @@ enum place_holder_in_cap_bitmap {
 	MAX_FEATURE_SUPPORTED = 128,
 };
 
+#define WCN36XX_HAL_CAPS_SIZE 4
+
 struct wcn36xx_hal_feat_caps_msg {
 
 	struct wcn36xx_hal_msg_header header;
 
-	u32 feat_caps[4];
+	u32 feat_caps[WCN36XX_HAL_CAPS_SIZE];
 } __packed;
 
 /* status codes to help debug rekey failures */
diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c
index 8a57dfe6c6e8..425365ce6139 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.c
+++ b/drivers/net/wireless/ath/wcn36xx/smd.c
@@ -1731,8 +1731,8 @@ static inline void clear_feat_caps(u32 *bitmap,
 
 int wcn36xx_smd_feature_caps_exchange(struct wcn36xx *wcn)
 {
-	struct wcn36xx_hal_feat_caps_msg msg_body;
-	int ret = 0;
+	struct wcn36xx_hal_feat_caps_msg msg_body, *rsp;
+	int ret = 0, i;
 
 	mutex_lock(&wcn->hal_mutex);
 	INIT_HAL_MSG(msg_body, WCN36XX_HAL_FEATURE_CAPS_EXCHANGE_REQ);
@@ -1746,12 +1746,15 @@ int wcn36xx_smd_feature_caps_exchange(struct wcn36xx *wcn)
 		wcn36xx_err("Sending hal_feature_caps_exchange failed\n");
 		goto out;
 	}
-	ret = wcn36xx_smd_rsp_status_check(wcn->hal_buf, wcn->hal_rsp_len);
-	if (ret) {
-		wcn36xx_err("hal_feature_caps_exchange response failed err=%d\n",
-			    ret);
+	if (wcn->hal_rsp_len != sizeof(*rsp)) {
+		wcn36xx_err("Invalid hal_feature_caps_exchange response");
 		goto out;
 	}
+
+	rsp = (struct wcn36xx_hal_feat_caps_msg *) wcn->hal_buf;
+
+	for (i = 0; i < WCN36XX_HAL_CAPS_SIZE; i++)
+		wcn->fw_feat_caps[i] = rsp->feat_caps[i];
 out:
 	mutex_unlock(&wcn->hal_mutex);
 	return ret;
diff --git a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
index 8fa5cbace5ab..c5bd61cffc9e 100644
--- a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
+++ b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
@@ -175,6 +175,7 @@ struct wcn36xx {
 	u8			fw_version;
 	u8			fw_minor;
 	u8			fw_major;
+	u32			fw_feat_caps[WCN36XX_HAL_CAPS_SIZE];
 
 	/* extra byte for the NULL termination */
 	u8			crm_version[WCN36XX_HAL_VERSION_LENGTH + 1];
-- 
cgit v1.2.2


From 546c505bdc64c471be33a5ab525458431d718f5e Mon Sep 17 00:00:00 2001
From: Pontus Fuchs <pontus.fuchs@gmail.com>
Date: Wed, 12 Feb 2014 19:04:42 +0000
Subject: wcn36xx: Wait longer for SMD commands to complete

On some wcnss firmwares the start command can take up to 300ms to
complete. Currently there is a 200ms timeout for SMD command to
complete which causes the start to fail.

Increase the timeout to 500ms. Also improve debug information
regarding SMD command completion time.

Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wcn36xx/smd.c | 7 ++++++-
 drivers/net/wireless/ath/wcn36xx/smd.h | 2 +-
 2 files changed, 7 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c
index 425365ce6139..ad93cc791110 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.c
+++ b/drivers/net/wireless/ath/wcn36xx/smd.c
@@ -195,9 +195,11 @@ static void wcn36xx_smd_set_sta_params(struct wcn36xx *wcn,
 static int wcn36xx_smd_send_and_wait(struct wcn36xx *wcn, size_t len)
 {
 	int ret = 0;
+	unsigned long start;
 	wcn36xx_dbg_dump(WCN36XX_DBG_SMD_DUMP, "HAL >>> ", wcn->hal_buf, len);
 
 	init_completion(&wcn->hal_rsp_compl);
+	start = jiffies;
 	ret = wcn->ctrl_ops->tx(wcn->hal_buf, len);
 	if (ret) {
 		wcn36xx_err("HAL TX failed\n");
@@ -205,10 +207,13 @@ static int wcn36xx_smd_send_and_wait(struct wcn36xx *wcn, size_t len)
 	}
 	if (wait_for_completion_timeout(&wcn->hal_rsp_compl,
 		msecs_to_jiffies(HAL_MSG_TIMEOUT)) <= 0) {
-		wcn36xx_err("Timeout while waiting SMD response\n");
+		wcn36xx_err("Timeout! No SMD response in %dms\n",
+			    HAL_MSG_TIMEOUT);
 		ret = -ETIME;
 		goto out;
 	}
+	wcn36xx_dbg(WCN36XX_DBG_SMD, "SMD command completed in %dms",
+		    jiffies_to_msecs(jiffies - start));
 out:
 	return ret;
 }
diff --git a/drivers/net/wireless/ath/wcn36xx/smd.h b/drivers/net/wireless/ath/wcn36xx/smd.h
index e7c39019c6f1..c46246f8acb9 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.h
+++ b/drivers/net/wireless/ath/wcn36xx/smd.h
@@ -24,7 +24,7 @@
 
 #define WCN36XX_HAL_BUF_SIZE				4096
 
-#define HAL_MSG_TIMEOUT 200
+#define HAL_MSG_TIMEOUT 500
 #define WCN36XX_SMSM_WLAN_TX_ENABLE			0x00000400
 #define WCN36XX_SMSM_WLAN_TX_RINGS_EMPTY		0x00000200
 /* The PNO version info be contained in the rsp msg */
-- 
cgit v1.2.2


From 4bda7faf619a609534bb99c860a0a32ec40b8fb6 Mon Sep 17 00:00:00 2001
From: Pontus Fuchs <pontus.fuchs@gmail.com>
Date: Wed, 12 Feb 2014 19:04:43 +0000
Subject: wcn36xx: Cache nv to avoid request_firmware on resume path

If wowlan if off mac80211 will stop / start the driver on suspend /
resume. This causes problems on resume since request_firmware is called
from start. Fix this by caching the nv.

Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wcn36xx/main.c    |  2 ++
 drivers/net/wireless/ath/wcn36xx/smd.c     | 22 ++++++++++------------
 drivers/net/wireless/ath/wcn36xx/wcn36xx.h |  2 ++
 3 files changed, 14 insertions(+), 12 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c
index e64a6784079e..a801aaa76037 100644
--- a/drivers/net/wireless/ath/wcn36xx/main.c
+++ b/drivers/net/wireless/ath/wcn36xx/main.c
@@ -17,6 +17,7 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/module.h>
+#include <linux/firmware.h>
 #include <linux/platform_device.h>
 #include "wcn36xx.h"
 
@@ -992,6 +993,7 @@ static int wcn36xx_remove(struct platform_device *pdev)
 	struct wcn36xx *wcn = hw->priv;
 	wcn36xx_dbg(WCN36XX_DBG_MAC, "platform remove\n");
 
+	release_firmware(wcn->nv);
 	mutex_destroy(&wcn->hal_mutex);
 
 	ieee80211_unregister_hw(hw);
diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c
index ad93cc791110..d5e90c45a482 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.c
+++ b/drivers/net/wireless/ath/wcn36xx/smd.c
@@ -251,21 +251,22 @@ static int wcn36xx_smd_rsp_status_check(void *buf, size_t len)
 
 int wcn36xx_smd_load_nv(struct wcn36xx *wcn)
 {
-	const struct firmware *nv;
 	struct nv_data *nv_d;
 	struct wcn36xx_hal_nv_img_download_req_msg msg_body;
 	int fw_bytes_left;
 	int ret;
 	u16 fm_offset = 0;
 
-	ret = request_firmware(&nv, WLAN_NV_FILE, wcn->dev);
-	if (ret) {
-		wcn36xx_err("Failed to load nv file %s: %d\n",
-			      WLAN_NV_FILE, ret);
-		goto out_free_nv;
+	if (!wcn->nv) {
+		ret = request_firmware(&wcn->nv, WLAN_NV_FILE, wcn->dev);
+		if (ret) {
+			wcn36xx_err("Failed to load nv file %s: %d\n",
+				      WLAN_NV_FILE, ret);
+			goto out;
+		}
 	}
 
-	nv_d = (struct nv_data *)nv->data;
+	nv_d = (struct nv_data *)wcn->nv->data;
 	INIT_HAL_MSG(msg_body, WCN36XX_HAL_DOWNLOAD_NV_REQ);
 
 	msg_body.header.len += WCN36XX_NV_FRAGMENT_SIZE;
@@ -275,7 +276,7 @@ int wcn36xx_smd_load_nv(struct wcn36xx *wcn)
 	mutex_lock(&wcn->hal_mutex);
 
 	do {
-		fw_bytes_left = nv->size - fm_offset - 4;
+		fw_bytes_left = wcn->nv->size - fm_offset - 4;
 		if (fw_bytes_left > WCN36XX_NV_FRAGMENT_SIZE) {
 			msg_body.last_fragment = 0;
 			msg_body.nv_img_buffer_size = WCN36XX_NV_FRAGMENT_SIZE;
@@ -313,10 +314,7 @@ int wcn36xx_smd_load_nv(struct wcn36xx *wcn)
 
 out_unlock:
 	mutex_unlock(&wcn->hal_mutex);
-out_free_nv:
-	release_firmware(nv);
-
-	return ret;
+out:	return ret;
 }
 
 static int wcn36xx_smd_start_rsp(struct wcn36xx *wcn, void *buf, size_t len)
diff --git a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
index c5bd61cffc9e..0c5413f2c2e0 100644
--- a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
+++ b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
@@ -171,6 +171,8 @@ struct wcn36xx {
 	struct device		*dev;
 	struct list_head	vif_list;
 
+	const struct firmware	*nv;
+
 	u8			fw_revision;
 	u8			fw_version;
 	u8			fw_minor;
-- 
cgit v1.2.2


From 2be6636a9610ca3924ac3ee1f4a49eced912297b Mon Sep 17 00:00:00 2001
From: Pontus Fuchs <pontus.fuchs@gmail.com>
Date: Wed, 12 Feb 2014 19:04:44 +0000
Subject: wcn36xx: Print FW capabilities

After fw caps exchange, print the FW's capabilities.

Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wcn36xx/main.c | 45 +++++++++++++++++++++++++++++++++
 drivers/net/wireless/ath/wcn36xx/smd.c  |  9 +++----
 drivers/net/wireless/ath/wcn36xx/smd.h  |  3 +++
 3 files changed, 51 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c
index a801aaa76037..95fd5c6614b0 100644
--- a/drivers/net/wireless/ath/wcn36xx/main.c
+++ b/drivers/net/wireless/ath/wcn36xx/main.c
@@ -178,6 +178,49 @@ static inline u8 get_sta_index(struct ieee80211_vif *vif,
 	       sta_priv->sta_index;
 }
 
+static const char * const wcn36xx_caps_names[] = {
+	"MCC",				/* 0 */
+	"P2P",				/* 1 */
+	"DOT11AC",			/* 2 */
+	"SLM_SESSIONIZATION",		/* 3 */
+	"DOT11AC_OPMODE",		/* 4 */
+	"SAP32STA",			/* 5 */
+	"TDLS",				/* 6 */
+	"P2P_GO_NOA_DECOUPLE_INIT_SCAN",/* 7 */
+	"WLANACTIVE_OFFLOAD",		/* 8 */
+	"BEACON_OFFLOAD",		/* 9 */
+	"SCAN_OFFLOAD",			/* 10 */
+	"ROAM_OFFLOAD",			/* 11 */
+	"BCN_MISS_OFFLOAD",		/* 12 */
+	"STA_POWERSAVE",		/* 13 */
+	"STA_ADVANCED_PWRSAVE",		/* 14 */
+	"AP_UAPSD",			/* 15 */
+	"AP_DFS",			/* 16 */
+	"BLOCKACK",			/* 17 */
+	"PHY_ERR",			/* 18 */
+	"BCN_FILTER",			/* 19 */
+	"RTT",				/* 20 */
+	"RATECTRL",			/* 21 */
+	"WOW"				/* 22 */
+};
+
+static const char *wcn36xx_get_cap_name(enum place_holder_in_cap_bitmap x)
+{
+	if (x >= ARRAY_SIZE(wcn36xx_caps_names))
+		return "UNKNOWN";
+	return wcn36xx_caps_names[x];
+}
+
+static void wcn36xx_feat_caps_info(struct wcn36xx *wcn)
+{
+	int i;
+
+	for (i = 0; i < MAX_FEATURE_SUPPORTED; i++) {
+		if (get_feat_caps(wcn->fw_feat_caps, i))
+			wcn36xx_info("FW Cap %s\n", wcn36xx_get_cap_name(i));
+	}
+}
+
 static int wcn36xx_start(struct ieee80211_hw *hw)
 {
 	struct wcn36xx *wcn = hw->priv;
@@ -237,6 +280,8 @@ static int wcn36xx_start(struct ieee80211_hw *hw)
 		ret = wcn36xx_smd_feature_caps_exchange(wcn);
 		if (ret)
 			wcn36xx_warn("Exchange feature caps failed\n");
+		else
+			wcn36xx_feat_caps_info(wcn);
 	}
 	INIT_LIST_HEAD(&wcn->vif_list);
 	return 0;
diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c
index d5e90c45a482..ae36409656db 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.c
+++ b/drivers/net/wireless/ath/wcn36xx/smd.c
@@ -1685,8 +1685,7 @@ out:
 	return ret;
 }
 
-static inline void set_feat_caps(u32 *bitmap,
-				 enum place_holder_in_cap_bitmap cap)
+void set_feat_caps(u32 *bitmap, enum place_holder_in_cap_bitmap cap)
 {
 	int arr_idx, bit_idx;
 
@@ -1700,8 +1699,7 @@ static inline void set_feat_caps(u32 *bitmap,
 	bitmap[arr_idx] |= (1 << bit_idx);
 }
 
-static inline int get_feat_caps(u32 *bitmap,
-				enum place_holder_in_cap_bitmap cap)
+int get_feat_caps(u32 *bitmap, enum place_holder_in_cap_bitmap cap)
 {
 	int arr_idx, bit_idx;
 	int ret = 0;
@@ -1717,8 +1715,7 @@ static inline int get_feat_caps(u32 *bitmap,
 	return ret;
 }
 
-static inline void clear_feat_caps(u32 *bitmap,
-				enum place_holder_in_cap_bitmap cap)
+void clear_feat_caps(u32 *bitmap, enum place_holder_in_cap_bitmap cap)
 {
 	int arr_idx, bit_idx;
 
diff --git a/drivers/net/wireless/ath/wcn36xx/smd.h b/drivers/net/wireless/ath/wcn36xx/smd.h
index c46246f8acb9..008d03423dbf 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.h
+++ b/drivers/net/wireless/ath/wcn36xx/smd.h
@@ -112,6 +112,9 @@ int wcn36xx_smd_keep_alive_req(struct wcn36xx *wcn,
 int wcn36xx_smd_dump_cmd_req(struct wcn36xx *wcn, u32 arg1, u32 arg2,
 			     u32 arg3, u32 arg4, u32 arg5);
 int wcn36xx_smd_feature_caps_exchange(struct wcn36xx *wcn);
+void set_feat_caps(u32 *bitmap, enum place_holder_in_cap_bitmap cap);
+int get_feat_caps(u32 *bitmap, enum place_holder_in_cap_bitmap cap);
+void clear_feat_caps(u32 *bitmap, enum place_holder_in_cap_bitmap cap);
 
 int wcn36xx_smd_add_ba_session(struct wcn36xx *wcn,
 		struct ieee80211_sta *sta,
-- 
cgit v1.2.2


From f2ed5d2499b550917c7f5e50476e39548de68092 Mon Sep 17 00:00:00 2001
From: Pontus Fuchs <pontus.fuchs@gmail.com>
Date: Wed, 12 Feb 2014 19:04:45 +0000
Subject: wcn36xx: Add support for 3680

3680 has a few registers on other addresses.

Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wcn36xx/dxe.c     | 10 +++++++++-
 drivers/net/wireless/ath/wcn36xx/dxe.h     |  4 ++--
 drivers/net/wireless/ath/wcn36xx/main.c    | 28 +++++++++++++++++++++-------
 drivers/net/wireless/ath/wcn36xx/wcn36xx.h |  4 ++++
 4 files changed, 36 insertions(+), 10 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/wcn36xx/dxe.c b/drivers/net/wireless/ath/wcn36xx/dxe.c
index ee25786b4447..73f12f196f14 100644
--- a/drivers/net/wireless/ath/wcn36xx/dxe.c
+++ b/drivers/net/wireless/ath/wcn36xx/dxe.c
@@ -44,6 +44,14 @@ static void wcn36xx_dxe_write_register(struct wcn36xx *wcn, int addr, int data)
 	writel(data, wcn->mmio + addr);
 }
 
+#define wcn36xx_dxe_write_register_x(wcn, reg, reg_data)		 \
+do {									 \
+	if (wcn->chip_version == WCN36XX_CHIP_3680)			 \
+		wcn36xx_dxe_write_register(wcn, reg ## _3680, reg_data); \
+	else								 \
+		wcn36xx_dxe_write_register(wcn, reg ## _3660, reg_data); \
+} while (0)								 \
+
 static void wcn36xx_dxe_read_register(struct wcn36xx *wcn, int addr, int *data)
 {
 	*data = readl(wcn->mmio + addr);
@@ -680,7 +688,7 @@ int wcn36xx_dxe_init(struct wcn36xx *wcn)
 
 	/* Setting interrupt path */
 	reg_data = WCN36XX_DXE_CCU_INT;
-	wcn36xx_dxe_write_register(wcn, WCN36XX_DXE_REG_CCU_INT, reg_data);
+	wcn36xx_dxe_write_register_x(wcn, WCN36XX_DXE_REG_CCU_INT, reg_data);
 
 	/***************************************/
 	/* Init descriptors for TX LOW channel */
diff --git a/drivers/net/wireless/ath/wcn36xx/dxe.h b/drivers/net/wireless/ath/wcn36xx/dxe.h
index c88562f85de1..35ee7e966bd2 100644
--- a/drivers/net/wireless/ath/wcn36xx/dxe.h
+++ b/drivers/net/wireless/ath/wcn36xx/dxe.h
@@ -28,11 +28,11 @@ H2H_TEST_RX_TX = DMA2
 */
 
 /* DXE registers */
-#define WCN36XX_DXE_MEM_BASE			0x03000000
 #define WCN36XX_DXE_MEM_REG			0x202000
 
 #define WCN36XX_DXE_CCU_INT			0xA0011
-#define WCN36XX_DXE_REG_CCU_INT			0x200b10
+#define WCN36XX_DXE_REG_CCU_INT_3660		0x200b10
+#define WCN36XX_DXE_REG_CCU_INT_3680		0x2050dc
 
 /* TODO This must calculated properly but not hardcoded */
 #define WCN36XX_DXE_CTRL_TX_L			0x328a44
diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c
index 95fd5c6614b0..dca21ee69a62 100644
--- a/drivers/net/wireless/ath/wcn36xx/main.c
+++ b/drivers/net/wireless/ath/wcn36xx/main.c
@@ -221,6 +221,17 @@ static void wcn36xx_feat_caps_info(struct wcn36xx *wcn)
 	}
 }
 
+static void wcn36xx_detect_chip_version(struct wcn36xx *wcn)
+{
+	if (get_feat_caps(wcn->fw_feat_caps, DOT11AC)) {
+		wcn36xx_info("Chip is 3680\n");
+		wcn->chip_version = WCN36XX_CHIP_3680;
+	} else {
+		wcn36xx_info("Chip is 3660\n");
+		wcn->chip_version = WCN36XX_CHIP_3660;
+	}
+}
+
 static int wcn36xx_start(struct ieee80211_hw *hw)
 {
 	struct wcn36xx *wcn = hw->priv;
@@ -267,6 +278,16 @@ static int wcn36xx_start(struct ieee80211_hw *hw)
 		goto out_free_smd_buf;
 	}
 
+	if (!wcn36xx_is_fw_version(wcn, 1, 2, 2, 24)) {
+		ret = wcn36xx_smd_feature_caps_exchange(wcn);
+		if (ret)
+			wcn36xx_warn("Exchange feature caps failed\n");
+		else
+			wcn36xx_feat_caps_info(wcn);
+	}
+
+	wcn36xx_detect_chip_version(wcn);
+
 	/* DMA channel initialization */
 	ret = wcn36xx_dxe_init(wcn);
 	if (ret) {
@@ -276,13 +297,6 @@ static int wcn36xx_start(struct ieee80211_hw *hw)
 
 	wcn36xx_debugfs_init(wcn);
 
-	if (!wcn36xx_is_fw_version(wcn, 1, 2, 2, 24)) {
-		ret = wcn36xx_smd_feature_caps_exchange(wcn);
-		if (ret)
-			wcn36xx_warn("Exchange feature caps failed\n");
-		else
-			wcn36xx_feat_caps_info(wcn);
-	}
 	INIT_LIST_HEAD(&wcn->vif_list);
 	return 0;
 
diff --git a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
index 0c5413f2c2e0..b4dc85b45910 100644
--- a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
+++ b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
@@ -178,6 +178,7 @@ struct wcn36xx {
 	u8			fw_minor;
 	u8			fw_major;
 	u32			fw_feat_caps[WCN36XX_HAL_CAPS_SIZE];
+	u32			chip_version;
 
 	/* extra byte for the NULL termination */
 	u8			crm_version[WCN36XX_HAL_VERSION_LENGTH + 1];
@@ -225,6 +226,9 @@ struct wcn36xx {
 
 };
 
+#define WCN36XX_CHIP_3660	0
+#define WCN36XX_CHIP_3680	1
+
 static inline bool wcn36xx_is_fw_version(struct wcn36xx *wcn,
 					 u8 major,
 					 u8 minor,
-- 
cgit v1.2.2


From 2ba0b46175967a40773f8be15f6678307fa3f45a Mon Sep 17 00:00:00 2001
From: Pontus Fuchs <pontus.fuchs@gmail.com>
Date: Wed, 12 Feb 2014 19:04:46 +0000
Subject: wcn36xx: Rename wcn36xx_vif.ucast_dpu_signature to
 self_ucast_dpu_sign

This is more line with the names of the other members

Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wcn36xx/smd.c     | 2 +-
 drivers/net/wireless/ath/wcn36xx/txrx.c    | 2 +-
 drivers/net/wireless/ath/wcn36xx/wcn36xx.h | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c
index ae36409656db..c7da55c94f31 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.c
+++ b/drivers/net/wireless/ath/wcn36xx/smd.c
@@ -1121,7 +1121,7 @@ static int wcn36xx_smd_config_bss_rsp(struct wcn36xx *wcn,
 		priv_vif->sta->bss_dpu_desc_index = params->dpu_desc_index;
 	}
 
-	priv_vif->ucast_dpu_signature = params->ucast_dpu_signature;
+	priv_vif->self_ucast_dpu_sign = params->ucast_dpu_signature;
 
 	return 0;
 }
diff --git a/drivers/net/wireless/ath/wcn36xx/txrx.c b/drivers/net/wireless/ath/wcn36xx/txrx.c
index 6846f858ef62..6194c42b44ee 100644
--- a/drivers/net/wireless/ath/wcn36xx/txrx.c
+++ b/drivers/net/wireless/ath/wcn36xx/txrx.c
@@ -146,7 +146,7 @@ static void wcn36xx_set_tx_data(struct wcn36xx_tx_bd *bd,
 		bd->dpu_desc_idx = __vif_priv->self_dpu_desc_index;
 	}
 
-	bd->dpu_sign = __vif_priv->ucast_dpu_signature;
+	bd->dpu_sign = __vif_priv->self_ucast_dpu_sign;
 
 	if (ieee80211_is_nullfunc(hdr->frame_control) ||
 	   (sta_priv && !sta_priv->is_data_encrypted))
diff --git a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
index b4dc85b45910..644710556a97 100644
--- a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
+++ b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
@@ -125,10 +125,10 @@ struct wcn36xx_vif {
 	enum wcn36xx_power_state pw_state;
 
 	u8 bss_index;
-	u8 ucast_dpu_signature;
 	/* Returned from WCN36XX_HAL_ADD_STA_SELF_RSP */
 	u8 self_sta_index;
 	u8 self_dpu_desc_index;
+	u8 self_ucast_dpu_sign;
 };
 
 /**
-- 
cgit v1.2.2


From 82cad2a0b047bf4ee3e6088944ab0199a009bcdb Mon Sep 17 00:00:00 2001
From: Pontus Fuchs <pontus.fuchs@gmail.com>
Date: Wed, 12 Feb 2014 19:04:47 +0000
Subject: wcn36xx: Track dpu signature per sta

This fixes problems seen with multiple softap clients and reconnecting
softap clients.

Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wcn36xx/smd.c     | 5 +++--
 drivers/net/wireless/ath/wcn36xx/txrx.c    | 4 ++--
 drivers/net/wireless/ath/wcn36xx/wcn36xx.h | 1 +
 3 files changed, 6 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c
index c7da55c94f31..7bf0ef8a1f56 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.c
+++ b/drivers/net/wireless/ath/wcn36xx/smd.c
@@ -902,11 +902,12 @@ static int wcn36xx_smd_config_sta_rsp(struct wcn36xx *wcn,
 
 	sta_priv->sta_index = params->sta_index;
 	sta_priv->dpu_desc_index = params->dpu_index;
+	sta_priv->ucast_dpu_sign = params->uc_ucast_sig;
 
 	wcn36xx_dbg(WCN36XX_DBG_HAL,
-		    "hal config sta rsp status %d sta_index %d bssid_index %d p2p %d\n",
+		    "hal config sta rsp status %d sta_index %d bssid_index %d uc_ucast_sig %d p2p %d\n",
 		    params->status, params->sta_index, params->bssid_index,
-		    params->p2p);
+		    params->uc_ucast_sig, params->p2p);
 
 	return 0;
 }
diff --git a/drivers/net/wireless/ath/wcn36xx/txrx.c b/drivers/net/wireless/ath/wcn36xx/txrx.c
index 6194c42b44ee..32bb26a0db2a 100644
--- a/drivers/net/wireless/ath/wcn36xx/txrx.c
+++ b/drivers/net/wireless/ath/wcn36xx/txrx.c
@@ -131,6 +131,7 @@ static void wcn36xx_set_tx_data(struct wcn36xx_tx_bd *bd,
 				   struct ieee80211_vif,
 				   drv_priv);
 
+		bd->dpu_sign = sta_priv->ucast_dpu_sign;
 		if (vif->type == NL80211_IFTYPE_STATION) {
 			bd->sta_index = sta_priv->bss_sta_index;
 			bd->dpu_desc_idx = sta_priv->bss_dpu_desc_index;
@@ -144,10 +145,9 @@ static void wcn36xx_set_tx_data(struct wcn36xx_tx_bd *bd,
 		__vif_priv = get_vif_by_addr(wcn, hdr->addr2);
 		bd->sta_index = __vif_priv->self_sta_index;
 		bd->dpu_desc_idx = __vif_priv->self_dpu_desc_index;
+		bd->dpu_sign = __vif_priv->self_ucast_dpu_sign;
 	}
 
-	bd->dpu_sign = __vif_priv->self_ucast_dpu_sign;
-
 	if (ieee80211_is_nullfunc(hdr->frame_control) ||
 	   (sta_priv && !sta_priv->is_data_encrypted))
 		bd->dpu_ne = 1;
diff --git a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
index 644710556a97..f0fb81dfd17b 100644
--- a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
+++ b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
@@ -159,6 +159,7 @@ struct wcn36xx_sta {
 	u16 tid;
 	u8 sta_index;
 	u8 dpu_desc_index;
+	u8 ucast_dpu_sign;
 	u8 bss_sta_index;
 	u8 bss_dpu_desc_index;
 	bool is_data_encrypted;
-- 
cgit v1.2.2


From 908628db148ed542fcfde1bff9e5d4607f684b73 Mon Sep 17 00:00:00 2001
From: Pontus Fuchs <pontus.fuchs@gmail.com>
Date: Wed, 12 Feb 2014 19:04:48 +0000
Subject: wcn36xx: Update dtim period before starting BSS

The dtim period sent to FW was 0 because the dtim period
was never set. This caused an incorrect dtim count to be sent in
beacons.

Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wcn36xx/main.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c
index dca21ee69a62..4ab5370ab7a6 100644
--- a/drivers/net/wireless/ath/wcn36xx/main.c
+++ b/drivers/net/wireless/ath/wcn36xx/main.c
@@ -708,6 +708,7 @@ static void wcn36xx_bss_info_changed(struct ieee80211_hw *hw,
 			    bss_conf->enable_beacon);
 
 		if (bss_conf->enable_beacon) {
+			vif_priv->dtim_period = bss_conf->dtim_period;
 			vif_priv->bss_index = 0xff;
 			wcn36xx_smd_config_bss(wcn, vif, NULL,
 					       vif->addr, false);
-- 
cgit v1.2.2


From ddf1d0d7715eff6cf8f04f68ca14efdbf18bf7e2 Mon Sep 17 00:00:00 2001
From: Jesse Brandeburg <jesse.brandeburg@intel.com>
Date: Thu, 13 Feb 2014 03:48:39 -0800
Subject: i40e: spelling error

Fix a spelling error, s/extention/extension/.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/i40e/i40e_txrx.c   | 2 +-
 drivers/net/ethernet/intel/i40evf/i40e_txrx.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index d4bb482b1a7f..19af4ce0a4fe 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -892,7 +892,7 @@ static inline void i40e_rx_checksum(struct i40e_vsi *vsi,
 	      rx_status & (1 << I40E_RX_DESC_STATUS_L3L4P_SHIFT)))
 		return;
 
-	/* likely incorrect csum if alternate IP extention headers found */
+	/* likely incorrect csum if alternate IP extension headers found */
 	if (rx_status & (1 << I40E_RX_DESC_STATUS_IPV6EXADD_SHIFT))
 		return;
 
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
index ffdb01d853db..3bb755893786 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
@@ -722,7 +722,7 @@ static inline void i40e_rx_checksum(struct i40e_vsi *vsi,
 	      rx_status & (1 << I40E_RX_DESC_STATUS_L3L4P_SHIFT)))
 		return;
 
-	/* likely incorrect csum if alternate IP extention headers found */
+	/* likely incorrect csum if alternate IP extension headers found */
 	if (rx_status & (1 << I40E_RX_DESC_STATUS_IPV6EXADD_SHIFT))
 		return;
 
-- 
cgit v1.2.2


From 14ad37597b2038ad006674e5c7ab0248afe821d4 Mon Sep 17 00:00:00 2001
From: Jesse Brandeburg <jesse.brandeburg@intel.com>
Date: Thu, 13 Feb 2014 03:48:40 -0800
Subject: i40e: bump driver version

Update the driver version to 0.3.31-k.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index b901371ca361..f596f74cae4a 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -38,7 +38,7 @@ static const char i40e_driver_string[] =
 
 #define DRV_VERSION_MAJOR 0
 #define DRV_VERSION_MINOR 3
-#define DRV_VERSION_BUILD 30
+#define DRV_VERSION_BUILD 31
 #define DRV_VERSION __stringify(DRV_VERSION_MAJOR) "." \
 	     __stringify(DRV_VERSION_MINOR) "." \
 	     __stringify(DRV_VERSION_BUILD)    DRV_KERN
-- 
cgit v1.2.2


From af1a2a9c94d7b509ded794ef20b27f8fd36dee63 Mon Sep 17 00:00:00 2001
From: Jesse Brandeburg <jesse.brandeburg@intel.com>
Date: Thu, 13 Feb 2014 03:48:41 -0800
Subject: i40evf: trivial fixes

This change moves one operator up to the previous line and deletes
the duplicate declaration of ETH_ALEN.

Also update copyrights.

Change-ID: I88de73093b584e0f3b29d481ccd83fc4b1a1afa5
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/i40evf/i40e_txrx.c | 6 +++---
 drivers/net/ethernet/intel/i40evf/i40e_type.h | 4 +---
 2 files changed, 4 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
index 3bb755893786..827bb5fa4af9 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
  *
  * Intel Ethernet Controller XL710 Family Linux Virtual Function Driver
- * Copyright(c) 2013 Intel Corporation.
+ * Copyright(c) 2013 - 2014 Intel Corporation.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -807,8 +807,8 @@ static int i40e_clean_rx_irq(struct i40e_ring *rx_ring, int budget)
 
 	rx_desc = I40E_RX_DESC(rx_ring, i);
 	qword = le64_to_cpu(rx_desc->wb.qword1.status_error_len);
-	rx_status = (qword & I40E_RXD_QW1_STATUS_MASK)
-				>> I40E_RXD_QW1_STATUS_SHIFT;
+	rx_status = (qword & I40E_RXD_QW1_STATUS_MASK) >>
+		    I40E_RXD_QW1_STATUS_SHIFT;
 
 	while (rx_status & (1 << I40E_RX_DESC_STATUS_DD_SHIFT)) {
 		union i40e_rx_desc *next_rxd;
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_type.h b/drivers/net/ethernet/intel/i40evf/i40e_type.h
index 3bffac06592f..092aace2a76c 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_type.h
+++ b/drivers/net/ethernet/intel/i40evf/i40e_type.h
@@ -1,7 +1,7 @@
 /*******************************************************************************
  *
  * Intel Ethernet Controller XL710 Family Linux Virtual Function Driver
- * Copyright(c) 2013 Intel Corporation.
+ * Copyright(c) 2013 - 2014 Intel Corporation.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -64,8 +64,6 @@
 struct i40e_hw;
 typedef void (*I40E_ADMINQ_CALLBACK)(struct i40e_hw *, struct i40e_aq_desc *);
 
-#define ETH_ALEN	6
-
 /* Data type manipulation macros. */
 
 #define I40E_DESC_UNUSED(R)	\
-- 
cgit v1.2.2


From a63fa1cdb667609cd9f99435ecbbcda61861b38f Mon Sep 17 00:00:00 2001
From: Mitch Williams <mitch.a.williams@intel.com>
Date: Thu, 13 Feb 2014 03:48:42 -0800
Subject: i40evf: clean up memsets

As politely pointed out by Dave Miller, calls to memset do not need a
void pointer cast. Additionally, it is preferred to use sizeof(*the
actual object) instead of sizeof(type).

Change-ID: Id6a02429b7040111531f3865ea03fbe619167cb3
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Kevin Scott <kevin.c.scott@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/i40e/i40e_adminq.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_adminq.c b/drivers/net/ethernet/intel/i40e/i40e_adminq.c
index a50e6b3479ae..ed3902bf249b 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_adminq.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_adminq.c
@@ -647,9 +647,8 @@ static u16 i40e_clean_asq(struct i40e_hw *hw)
 			desc_cb = *desc;
 			cb_func(hw, &desc_cb);
 		}
-		memset((void *)desc, 0, sizeof(struct i40e_aq_desc));
-		memset((void *)details, 0,
-		       sizeof(struct i40e_asq_cmd_details));
+		memset(desc, 0, sizeof(*desc));
+		memset(details, 0, sizeof(*details));
 		ntc++;
 		if (ntc == asq->count)
 			ntc = 0;
-- 
cgit v1.2.2


From e108b0e341ec835df19dd3433b883b0abc509ed8 Mon Sep 17 00:00:00 2001
From: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Date: Thu, 13 Feb 2014 03:48:43 -0800
Subject: i40e: Setting i40e_down bit for tx_timeout

If tx_timeout recovery failed, then it becomes necessary to set
i40e_down bit before actually shutdown the connection.

Change-ID: Iaac81df0e302116571827aa0cff450697fbb7fa3
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index f596f74cae4a..8e444114bfc7 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -305,6 +305,7 @@ static void i40e_tx_timeout(struct net_device *netdev)
 		break;
 	default:
 		netdev_err(netdev, "tx_timeout recovery unsuccessful\n");
+		set_bit(__I40E_DOWN, &vsi->state);
 		i40e_down(vsi);
 		break;
 	}
-- 
cgit v1.2.2


From fd1646ee3a311362d3315250b30ccc688b919aef Mon Sep 17 00:00:00 2001
From: Mitch Williams <mitch.a.williams@intel.com>
Date: Thu, 13 Feb 2014 03:48:44 -0800
Subject: i40e: remove dead code

This looks like a cut and paste error. The code makes no sense where
it is, and accomplishes nothing. Since we've removed the goto, we can
also get rid of the extraneous brackets.

Change-ID: I9315e3eafeee0a5713c94b0dc57b58b60a849124
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 10 +---------
 1 file changed, 1 insertion(+), 9 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index b9d1c1c8ca5a..299372b852ce 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -408,18 +408,10 @@ static int i40e_alloc_vsi_res(struct i40e_vf *vf, enum i40e_vsi_type type)
 				 "Could not allocate VF broadcast filter\n");
 	}
 
-	if (!f) {
-		dev_err(&pf->pdev->dev, "Unable to add ucast filter\n");
-		ret = -ENOMEM;
-		goto error_alloc_vsi_res;
-	}
-
 	/* program mac filter */
 	ret = i40e_sync_vsi_filters(vsi);
-	if (ret) {
+	if (ret)
 		dev_err(&pf->pdev->dev, "Unable to program ucast filters\n");
-		goto error_alloc_vsi_res;
-	}
 
 error_alloc_vsi_res:
 	return ret;
-- 
cgit v1.2.2


From c17b362b6ffb720e570bb43fe28f2ac5e78a7ce8 Mon Sep 17 00:00:00 2001
From: Mitch Williams <mitch.a.williams@intel.com>
Date: Thu, 13 Feb 2014 03:48:45 -0800
Subject: i40e: set VF state to active when reset is complete

Without this, the VF can never communicate with the PF after a VF
reset.

Change-ID: I8d10f1d0d0638d50d39f0aff263422e05d83ad83
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index 299372b852ce..052be06b91aa 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -674,6 +674,7 @@ complete_reset:
 	mdelay(10);
 	i40e_alloc_vf_res(vf);
 	i40e_enable_vf_mappings(vf);
+	set_bit(I40E_VF_STAT_ACTIVE, &vf->vf_states);
 
 	/* tell the VF the reset is done */
 	wr32(hw, I40E_VFGEN_RSTAT1(vf->vf_id), I40E_VFR_VFACTIVE);
-- 
cgit v1.2.2


From 69f64b2b77012e5e1d9ae25135e85aa7f469c397 Mon Sep 17 00:00:00 2001
From: Mitch Williams <mitch.a.williams@intel.com>
Date: Thu, 13 Feb 2014 03:48:46 -0800
Subject: i40e: reset VFs after PF reset

Reset all of the VFs after a PF reset, so that they are in a known
state, and the VF driver can detect the reset and reinit itself.

Change-ID: I93c5b3a0f8b1371d0da078f92de948b9d3a6413f
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 8e444114bfc7..21d46f4bb214 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -5332,6 +5332,11 @@ static void i40e_reset_and_rebuild(struct i40e_pf *pf, bool reinit)
 	/* restart the VSIs that were rebuilt and running before the reset */
 	i40e_pf_unquiesce_all_vsi(pf);
 
+	if (pf->num_alloc_vfs) {
+		for (v = 0; v < pf->num_alloc_vfs; v++)
+			i40e_reset_vf(&pf->vf[v], true);
+	}
+
 	/* tell the firmware that we're starting */
 	dv.major_version = DRV_VERSION_MAJOR;
 	dv.minor_version = DRV_VERSION_MINOR;
-- 
cgit v1.2.2


From 4aeec0106d503a0b88bf3852834c05228c073423 Mon Sep 17 00:00:00 2001
From: Mitch Williams <mitch.a.williams@intel.com>
Date: Thu, 13 Feb 2014 03:48:47 -0800
Subject: i40e: enable extant VFs

If VFs are present when the driver loads, then set up some resources
so they can function.

Change-ID: I485916a811609a9990ce663d06dc645f625b07ff
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c        | 10 ++++++++++
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 18 ++++++++++--------
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h |  1 +
 3 files changed, 21 insertions(+), 8 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 21d46f4bb214..897452d72d71 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -8076,6 +8076,16 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		val &= ~I40E_PFGEN_PORTMDIO_NUM_VFLINK_STAT_ENA_MASK;
 		wr32(hw, I40E_PFGEN_PORTMDIO_NUM, val);
 		i40e_flush(hw);
+
+		if (pci_num_vf(pdev)) {
+			dev_info(&pdev->dev,
+				 "Active VFs found, allocating resources.\n");
+			err = i40e_alloc_vfs(pf, pci_num_vf(pdev));
+			if (err)
+				dev_info(&pdev->dev,
+					 "Error %d allocating resources for existing VFs\n",
+					 err);
+		}
 	}
 
 	pfs_found++;
diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index 052be06b91aa..9074f63a2447 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -840,7 +840,7 @@ void i40e_free_vfs(struct i40e_pf *pf)
  *
  * allocate vf resources
  **/
-static int i40e_alloc_vfs(struct i40e_pf *pf, u16 num_alloc_vfs)
+int i40e_alloc_vfs(struct i40e_pf *pf, u16 num_alloc_vfs)
 {
 	struct i40e_vf *vfs;
 	int i, ret = 0;
@@ -848,14 +848,16 @@ static int i40e_alloc_vfs(struct i40e_pf *pf, u16 num_alloc_vfs)
 	/* Disable interrupt 0 so we don't try to handle the VFLR. */
 	i40e_irq_dynamic_disable_icr0(pf);
 
-	ret = pci_enable_sriov(pf->pdev, num_alloc_vfs);
-	if (ret) {
-		dev_err(&pf->pdev->dev,
-			"pci_enable_sriov failed with error %d!\n", ret);
-		pf->num_alloc_vfs = 0;
-		goto err_iov;
+	/* Check to see if we're just allocating resources for extant VFs */
+	if (pci_num_vf(pf->pdev) != num_alloc_vfs) {
+		ret = pci_enable_sriov(pf->pdev, num_alloc_vfs);
+		if (ret) {
+			dev_err(&pf->pdev->dev,
+				"Failed to enable SR-IOV, error %d.\n", ret);
+			pf->num_alloc_vfs = 0;
+			goto err_iov;
+		}
 	}
-
 	/* allocate memory */
 	vfs = kzalloc(num_alloc_vfs * sizeof(struct i40e_vf), GFP_KERNEL);
 	if (!vfs) {
diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h
index cc1feee36e12..bedf0ba21d74 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h
@@ -102,6 +102,7 @@ struct i40e_vf {
 
 void i40e_free_vfs(struct i40e_pf *pf);
 int i40e_pci_sriov_configure(struct pci_dev *dev, int num_vfs);
+int i40e_alloc_vfs(struct i40e_pf *pf, u16 num_alloc_vfs);
 int i40e_vc_process_vf_msg(struct i40e_pf *pf, u16 vf_id, u32 v_opcode,
 			   u32 v_retval, u8 *msg, u16 msglen);
 int i40e_vc_process_vflr_event(struct i40e_pf *pf);
-- 
cgit v1.2.2


From eb2d80bcf6b3c101ffe728554ebb702db096917a Mon Sep 17 00:00:00 2001
From: Mitch Williams <mitch.a.williams@intel.com>
Date: Thu, 13 Feb 2014 03:48:48 -0800
Subject: i40e: don't handle VF reset on unload

Set the DOWN flag before attempting to disable VFs when unloading the
driver. Also, don't attempt to reset the VFs when the driver is
unloading, because the switch configuration will fail. This fixes a
panic on unload when VFs are enabled.

Change-ID: I25a6567e89c9687145f510ff4f630932412c5c5d
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c        | 10 +++++-----
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c |  3 ++-
 2 files changed, 7 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 897452d72d71..628e917f5338 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -8181,16 +8181,16 @@ static void i40e_remove(struct pci_dev *pdev)
 
 	i40e_ptp_stop(pf);
 
-	if (pf->flags & I40E_FLAG_SRIOV_ENABLED) {
-		i40e_free_vfs(pf);
-		pf->flags &= ~I40E_FLAG_SRIOV_ENABLED;
-	}
-
 	/* no more scheduling of any task */
 	set_bit(__I40E_DOWN, &pf->state);
 	del_timer_sync(&pf->service_timer);
 	cancel_work_sync(&pf->service_task);
 
+	if (pf->flags & I40E_FLAG_SRIOV_ENABLED) {
+		i40e_free_vfs(pf);
+		pf->flags &= ~I40E_FLAG_SRIOV_ENABLED;
+	}
+
 	i40e_fdir_teardown(pf);
 
 	/* If there is a switch structure or any orphans, remove them.
diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index 9074f63a2447..7d133faad4cf 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -1868,7 +1868,8 @@ int i40e_vc_process_vflr_event(struct i40e_pf *pf)
 			/* clear the bit in GLGEN_VFLRSTAT */
 			wr32(hw, I40E_GLGEN_VFLRSTAT(reg_idx), (1 << bit_idx));
 
-			i40e_reset_vf(vf, true);
+			if (!test_bit(__I40E_DOWN, &pf->state))
+				i40e_reset_vf(vf, true);
 		}
 	}
 
-- 
cgit v1.2.2


From a377384a0429d1dcf8956b803329588edf477ade Mon Sep 17 00:00:00 2001
From: Mitch Williams <mitch.a.williams@intel.com>
Date: Thu, 13 Feb 2014 03:48:49 -0800
Subject: i40evf: clean up adapter struct

Remove a bunch of unused structure members that are just wasting
space. Remove a completely unused info structure definition as well.

Also update copyrights.

Change-ID: I028ab92d9b7bd13a832cf3363bd1dc6610d8a535
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/i40evf/i40evf.h | 29 +----------------------------
 1 file changed, 1 insertion(+), 28 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40evf/i40evf.h b/drivers/net/ethernet/intel/i40evf/i40evf.h
index ff6529b288a1..05969b3a59e0 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf.h
+++ b/drivers/net/ethernet/intel/i40evf/i40evf.h
@@ -1,7 +1,7 @@
 /*******************************************************************************
  *
  * Intel Ethernet Controller XL710 Family Linux Virtual Function Driver
- * Copyright(c) 2013 Intel Corporation.
+ * Copyright(c) 2013 - 2014 Intel Corporation.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -185,7 +185,6 @@ enum i40evf_critical_section_t {
 /* board specific private data structure */
 struct i40evf_adapter {
 	struct timer_list watchdog_timer;
-	struct vlan_group *vlgrp;
 	struct work_struct reset_task;
 	struct work_struct adminq_task;
 	struct delayed_work init_task;
@@ -193,38 +192,19 @@ struct i40evf_adapter {
 	struct list_head vlan_filter_list;
 	char name[MAX_MSIX_COUNT][IFNAMSIZ + 9];
 
-	/* Interrupt Throttle Rate */
-	u32 itr_setting;
-	u16 eitr_low;
-	u16 eitr_high;
-
 	/* TX */
 	struct i40e_ring *tx_rings[I40E_MAX_VSI_QP];
-	u64 restart_queue;
-	u64 hw_csum_tx_good;
-	u64 lsc_int;
-	u64 hw_tso_ctxt;
-	u64 hw_tso6_ctxt;
 	u32 tx_timeout_count;
 	struct list_head mac_filter_list;
-#ifdef DEBUG
-	bool detect_tx_hung;
-#endif /* DEBUG */
 
 	/* RX */
 	struct i40e_ring *rx_rings[I40E_MAX_VSI_QP];
 	int txd_count;
 	int rxd_count;
 	u64 hw_csum_rx_error;
-	u64 hw_rx_no_dma_resources;
-	u64 hw_csum_rx_good;
-	u64 non_eop_descs;
 	int num_msix_vectors;
 	struct msix_entry *msix_entries;
 
-	u64 rx_hdr_split;
-
-	u32 init_state;
 	volatile unsigned long flags;
 #define I40EVF_FLAG_RX_CSUM_ENABLED              (u32)(1)
 #define I40EVF_FLAG_RX_1BUF_CAPABLE              (u32)(1 << 1)
@@ -261,11 +241,9 @@ struct i40evf_adapter {
 
 	enum i40evf_state_t state;
 	volatile unsigned long crit_section;
-	u64 tx_busy;
 
 	struct work_struct watchdog_task;
 	bool netdev_registered;
-	bool dev_closed;
 	bool link_up;
 	enum i40e_virtchnl_ops current_op;
 	struct i40e_virtchnl_vf_resource *vf_res; /* incl. all VSIs */
@@ -276,11 +254,6 @@ struct i40evf_adapter {
 	u32 aq_wait_count;
 };
 
-struct i40evf_info {
-	enum i40e_mac_type	mac;
-	unsigned int		flags;
-};
-
 
 /* needed by i40evf_ethtool.c */
 extern char i40evf_driver_name[];
-- 
cgit v1.2.2


From 708e8c247e43482f510a11c6720b0001a68b4404 Mon Sep 17 00:00:00 2001
From: Mitch Williams <mitch.a.williams@intel.com>
Date: Thu, 13 Feb 2014 03:48:50 -0800
Subject: i40evf: fix bogus comment

Locate the structure in the correct header file.

Change-ID: Ic7853131728812093a44a75d6b70953311a48dab
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/i40evf/i40evf.h | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40evf/i40evf.h b/drivers/net/ethernet/intel/i40evf/i40evf.h
index 05969b3a59e0..37f5877df2a9 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf.h
+++ b/drivers/net/ethernet/intel/i40evf/i40evf.h
@@ -236,8 +236,7 @@ struct i40evf_adapter {
 	struct pci_dev *pdev;
 	struct net_device_stats net_stats;
 
-	/* structs defined in i40e_vf.h */
-	struct i40e_hw hw;
+	struct i40e_hw hw; /* defined in i40e_type.h */
 
 	enum i40evf_state_t state;
 	volatile unsigned long crit_section;
-- 
cgit v1.2.2


From e1dfee8e64c2b30e123080e87c5528fae94f5440 Mon Sep 17 00:00:00 2001
From: Mitch Williams <mitch.a.williams@intel.com>
Date: Thu, 13 Feb 2014 03:48:51 -0800
Subject: i40evf: don't store unnecessary array of strings

Since we store the traffic vector names in the queue vector struct, we
don't need to maintain an array of strings for these names in the
adapter structure. Replace this array with a single string and use it
when allocating the misc irq vector.

Also update copyrights.

Change-ID: I664f096c3c008210d6a04a487163e8aa934fee5b
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/i40evf/i40evf.h      | 2 +-
 drivers/net/ethernet/intel/i40evf/i40evf_main.c | 7 ++++---
 2 files changed, 5 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40evf/i40evf.h b/drivers/net/ethernet/intel/i40evf/i40evf.h
index 37f5877df2a9..696c9d125188 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf.h
+++ b/drivers/net/ethernet/intel/i40evf/i40evf.h
@@ -190,7 +190,7 @@ struct i40evf_adapter {
 	struct delayed_work init_task;
 	struct i40e_q_vector *q_vector[MAX_MSIX_Q_VECTORS];
 	struct list_head vlan_filter_list;
-	char name[MAX_MSIX_COUNT][IFNAMSIZ + 9];
+	char misc_vector_name[IFNAMSIZ + 9];
 
 	/* TX */
 	struct i40e_ring *tx_rings[I40E_MAX_VSI_QP];
diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index f5caf4419243..d271d3a5ae28 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
  *
  * Intel Ethernet Controller XL710 Family Linux Virtual Function Driver
- * Copyright(c) 2013 Intel Corporation.
+ * Copyright(c) 2013 - 2014 Intel Corporation.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -511,9 +511,10 @@ static int i40evf_request_misc_irq(struct i40evf_adapter *adapter)
 	struct net_device *netdev = adapter->netdev;
 	int err;
 
-	sprintf(adapter->name[0], "i40evf:mbx");
+	sprintf(adapter->misc_vector_name, "i40evf:mbx");
 	err = request_irq(adapter->msix_entries[0].vector,
-			  &i40evf_msix_aq, 0, adapter->name[0], netdev);
+			  &i40evf_msix_aq, 0,
+			  adapter->misc_vector_name, netdev);
 	if (err) {
 		dev_err(&adapter->pdev->dev,
 			"request_irq for msix_aq failed: %d\n", err);
-- 
cgit v1.2.2


From e8106ebe2feb29b2790ba4ad4494b8f6a31126cc Mon Sep 17 00:00:00 2001
From: Mitch Williams <mitch.a.williams@intel.com>
Date: Thu, 13 Feb 2014 03:48:52 -0800
Subject: i40evf: change type of flags variable

As pointed out by Dan Carpenter (from Oracle), the flags variable is
declared as a 64-bit long but all of the flags are defined as u32,
which may lead to unintended consequences. Fix this by declaring flags
as u32 (since we don't need any more than about a dozen flags right
now), and remove the volatile qualifier, since it's unnecessary and
just makes checkpatch cry.

Change-ID: I137d3bb1842bf7e9456b5929ca54e3b0ed45dcab
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
CC: Dan Carpenter <dan.carpenter@oracle.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/i40evf/i40evf.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40evf/i40evf.h b/drivers/net/ethernet/intel/i40evf/i40evf.h
index 696c9d125188..5e0a3440c064 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf.h
+++ b/drivers/net/ethernet/intel/i40evf/i40evf.h
@@ -205,7 +205,7 @@ struct i40evf_adapter {
 	int num_msix_vectors;
 	struct msix_entry *msix_entries;
 
-	volatile unsigned long flags;
+	u32 flags;
 #define I40EVF_FLAG_RX_CSUM_ENABLED              (u32)(1)
 #define I40EVF_FLAG_RX_1BUF_CAPABLE              (u32)(1 << 1)
 #define I40EVF_FLAG_RX_PS_CAPABLE                (u32)(1 << 2)
-- 
cgit v1.2.2


From ef8693eb90ae38704569ba0e114859799eee1fed Mon Sep 17 00:00:00 2001
From: Mitch Williams <mitch.a.williams@intel.com>
Date: Thu, 13 Feb 2014 03:48:53 -0800
Subject: i40evf: refactor reset handling

Respond better to a VF reset event. When a reset is signaled by the
PF, or detected by the watchdog task, prevent the watchdog from
processing admin queue requests, and schedule the reset task.

In the reset task, wait first for the reset to start, then for it to
complete, then reinit the driver.

If the reset never appears to complete after a long, long time (>10
seconds is possible depending on what's going on with the PF driver),
then set a flag to indicate that PF communications have failed.

If this flag is set, check for the reset to complete in the watchdog,
and  attempt to do a full reinitialization of the driver from scratch.

With these changes the VF driver correctly handles a PF reset event
while running on bare metal, or in a VM.

Also update copyrights.

Change-ID: I93513efd0b50523a8345e7f6a33a5e4f8a2a5996
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/i40evf/i40evf.h         |   6 +-
 drivers/net/ethernet/intel/i40evf/i40evf_main.c    | 148 ++++++++++++++++-----
 .../net/ethernet/intel/i40evf/i40evf_virtchnl.c    |  15 ++-
 3 files changed, 130 insertions(+), 39 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40evf/i40evf.h b/drivers/net/ethernet/intel/i40evf/i40evf.h
index 5e0a3440c064..a30c4a9125a4 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf.h
+++ b/drivers/net/ethernet/intel/i40evf/i40evf.h
@@ -164,15 +164,14 @@ struct i40evf_vlan_filter {
 /* Driver state. The order of these is important! */
 enum i40evf_state_t {
 	__I40EVF_STARTUP,		/* driver loaded, probe complete */
-	__I40EVF_FAILED,		/* PF communication failed. Fatal. */
 	__I40EVF_REMOVE,		/* driver is being unloaded */
 	__I40EVF_INIT_VERSION_CHECK,	/* aq msg sent, awaiting reply */
 	__I40EVF_INIT_GET_RESOURCES,	/* aq msg sent, awaiting reply */
 	__I40EVF_INIT_SW,		/* got resources, setting up structs */
+	__I40EVF_RESETTING,		/* in reset */
 	/* Below here, watchdog is running */
 	__I40EVF_DOWN,			/* ready, can be opened */
 	__I40EVF_TESTING,		/* in ethtool self-test */
-	__I40EVF_RESETTING,		/* in reset */
 	__I40EVF_RUNNING,		/* opened, working */
 };
 
@@ -214,6 +213,8 @@ struct i40evf_adapter {
 #define I40EVF_FLAG_IMIR_ENABLED                 (u32)(1 << 5)
 #define I40EVF_FLAG_MQ_CAPABLE                   (u32)(1 << 6)
 #define I40EVF_FLAG_NEED_LINK_UPDATE             (u32)(1 << 7)
+#define I40EVF_FLAG_PF_COMMS_FAILED              (u32)(1 << 8)
+#define I40EVF_FLAG_RESET_PENDING                (u32)(1 << 9)
 /* duplcates for common code */
 #define I40E_FLAG_FDIR_ATR_ENABLED		 0
 #define I40E_FLAG_DCB_ENABLED			 0
@@ -231,6 +232,7 @@ struct i40evf_adapter {
 #define I40EVF_FLAG_AQ_CONFIGURE_QUEUES		(u32)(1 << 6)
 #define I40EVF_FLAG_AQ_MAP_VECTORS		(u32)(1 << 7)
 #define I40EVF_FLAG_AQ_HANDLE_RESET		(u32)(1 << 8)
+
 	/* OS defined structs */
 	struct net_device *netdev;
 	struct pci_dev *pdev;
diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index d271d3a5ae28..fe2271e19423 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -964,16 +964,18 @@ void i40evf_down(struct i40evf_adapter *adapter)
 	struct net_device *netdev = adapter->netdev;
 	struct i40evf_mac_filter *f;
 
-	/* remove all MAC filters from the VSI */
+	/* remove all MAC filters */
 	list_for_each_entry(f, &adapter->mac_filter_list, list) {
 		f->remove = true;
 	}
-	adapter->aq_required |= I40EVF_FLAG_AQ_DEL_MAC_FILTER;
-	/* disable receives */
-	adapter->aq_required |= I40EVF_FLAG_AQ_DISABLE_QUEUES;
-	mod_timer_pending(&adapter->watchdog_timer, jiffies + 1);
-	msleep(20);
-
+	if (!(adapter->flags & I40EVF_FLAG_PF_COMMS_FAILED) &&
+	    adapter->state != __I40EVF_RESETTING) {
+		adapter->aq_required |= I40EVF_FLAG_AQ_DEL_MAC_FILTER;
+		/* disable receives */
+		adapter->aq_required |= I40EVF_FLAG_AQ_DISABLE_QUEUES;
+		mod_timer_pending(&adapter->watchdog_timer, jiffies + 1);
+		msleep(20);
+	}
 	netif_tx_disable(netdev);
 
 	netif_tx_stop_all_queues(netdev);
@@ -1292,19 +1294,47 @@ static void i40evf_watchdog_task(struct work_struct *work)
 					  watchdog_task);
 	struct i40e_hw *hw = &adapter->hw;
 
-	if (adapter->state < __I40EVF_DOWN)
+	if (test_and_set_bit(__I40EVF_IN_CRITICAL_TASK, &adapter->crit_section))
+		goto restart_watchdog;
+
+	if (adapter->flags & I40EVF_FLAG_PF_COMMS_FAILED) {
+		dev_info(&adapter->pdev->dev, "Checking for redemption\n");
+		if ((rd32(hw, I40E_VFGEN_RSTAT) & 0x3) == I40E_VFR_VFACTIVE) {
+			/* A chance for redemption! */
+			dev_err(&adapter->pdev->dev, "Hardware came out of reset. Attempting reinit.\n");
+			adapter->state = __I40EVF_STARTUP;
+			adapter->flags &= ~I40EVF_FLAG_PF_COMMS_FAILED;
+			schedule_delayed_work(&adapter->init_task, 10);
+			clear_bit(__I40EVF_IN_CRITICAL_TASK,
+				  &adapter->crit_section);
+			/* Don't reschedule the watchdog, since we've restarted
+			 * the init task. When init_task contacts the PF and
+			 * gets everything set up again, it'll restart the
+			 * watchdog for us. Down, boy. Sit. Stay. Woof.
+			 */
+			return;
+		}
+		adapter->aq_pending = 0;
+		adapter->aq_required = 0;
+		adapter->current_op = I40E_VIRTCHNL_OP_UNKNOWN;
 		goto watchdog_done;
+	}
 
-	if (test_and_set_bit(__I40EVF_IN_CRITICAL_TASK, &adapter->crit_section))
+	if ((adapter->state < __I40EVF_DOWN) ||
+	    (adapter->flags & I40EVF_FLAG_RESET_PENDING))
 		goto watchdog_done;
 
-	/* check for unannounced reset */
-	if ((adapter->state != __I40EVF_RESETTING) &&
+	/* check for reset */
+	if (!(adapter->flags & I40EVF_FLAG_RESET_PENDING) &&
 	    (rd32(hw, I40E_VFGEN_RSTAT) & 0x3) != I40E_VFR_VFACTIVE) {
 		adapter->state = __I40EVF_RESETTING;
+		adapter->flags |= I40EVF_FLAG_RESET_PENDING;
+		dev_err(&adapter->pdev->dev, "Hardware reset detected.\n");
+		dev_info(&adapter->pdev->dev, "Scheduling reset task\n");
 		schedule_work(&adapter->reset_task);
-		dev_info(&adapter->pdev->dev, "%s: hardware reset detected\n",
-			 __func__);
+		adapter->aq_pending = 0;
+		adapter->aq_required = 0;
+		adapter->current_op = I40E_VIRTCHNL_OP_UNKNOWN;
 		goto watchdog_done;
 	}
 
@@ -1359,13 +1389,15 @@ static void i40evf_watchdog_task(struct work_struct *work)
 
 	i40evf_irq_enable(adapter, true);
 	i40evf_fire_sw_int(adapter, 0xFF);
+
 watchdog_done:
+	clear_bit(__I40EVF_IN_CRITICAL_TASK, &adapter->crit_section);
+restart_watchdog:
 	if (adapter->aq_required)
 		mod_timer(&adapter->watchdog_timer,
 			  jiffies + msecs_to_jiffies(20));
 	else
 		mod_timer(&adapter->watchdog_timer, jiffies + (HZ * 2));
-	clear_bit(__I40EVF_IN_CRITICAL_TASK, &adapter->crit_section);
 	schedule_work(&adapter->adminq_task);
 }
 
@@ -1412,6 +1444,8 @@ static void i40evf_configure_rss(struct i40evf_adapter *adapter)
 	i40e_flush(hw);
 }
 
+#define I40EVF_RESET_WAIT_MS 100
+#define I40EVF_RESET_WAIT_COUNT 200
 /**
  * i40evf_reset_task - Call-back task to handle hardware reset
  * @work: pointer to work_struct
@@ -1422,8 +1456,9 @@ static void i40evf_configure_rss(struct i40evf_adapter *adapter)
  **/
 static void i40evf_reset_task(struct work_struct *work)
 {
-	struct i40evf_adapter *adapter =
-			container_of(work, struct i40evf_adapter, reset_task);
+	struct i40evf_adapter *adapter = container_of(work,
+						      struct i40evf_adapter,
+						      reset_task);
 	struct i40e_hw *hw = &adapter->hw;
 	int i = 0, err;
 	uint32_t rstat_val;
@@ -1431,22 +1466,56 @@ static void i40evf_reset_task(struct work_struct *work)
 	while (test_and_set_bit(__I40EVF_IN_CRITICAL_TASK,
 				&adapter->crit_section))
 		udelay(500);
+	/* poll until we see the reset actually happen */
+	for (i = 0; i < I40EVF_RESET_WAIT_COUNT; i++) {
+		rstat_val = rd32(hw, I40E_VFGEN_RSTAT) &
+			    I40E_VFGEN_RSTAT_VFR_STATE_MASK;
+		if (rstat_val != I40E_VFR_VFACTIVE) {
+			dev_info(&adapter->pdev->dev, "Reset now occurring\n");
+			break;
+		} else {
+			msleep(I40EVF_RESET_WAIT_MS);
+		}
+	}
+	if (i == I40EVF_RESET_WAIT_COUNT) {
+		dev_err(&adapter->pdev->dev, "Reset was not detected\n");
+		adapter->flags &= ~I40EVF_FLAG_RESET_PENDING;
+		goto continue_reset; /* act like the reset happened */
+	}
 
-	/* wait until the reset is complete */
-	for (i = 0; i < 20; i++) {
+	/* wait until the reset is complete and the PF is responding to us */
+	for (i = 0; i < I40EVF_RESET_WAIT_COUNT; i++) {
 		rstat_val = rd32(hw, I40E_VFGEN_RSTAT) &
 			    I40E_VFGEN_RSTAT_VFR_STATE_MASK;
-		if (rstat_val == I40E_VFR_COMPLETED)
+		if (rstat_val == I40E_VFR_VFACTIVE) {
+			dev_info(&adapter->pdev->dev, "Reset is complete. Reinitializing.\n");
 			break;
-		else
-			mdelay(100);
+		} else {
+			msleep(I40EVF_RESET_WAIT_MS);
+		}
 	}
-	if (i == 20) {
+	if (i == I40EVF_RESET_WAIT_COUNT) {
 		/* reset never finished */
-		dev_info(&adapter->pdev->dev, "%s: reset never finished: %x\n",
-			__func__, rstat_val);
-		/* carry on anyway */
+		dev_err(&adapter->pdev->dev, "Reset never finished (%x). PF driver is dead, and so am I.\n",
+			rstat_val);
+		adapter->flags |= I40EVF_FLAG_PF_COMMS_FAILED;
+
+		if (netif_running(adapter->netdev))
+			i40evf_close(adapter->netdev);
+
+		i40evf_free_misc_irq(adapter);
+		i40evf_reset_interrupt_capability(adapter);
+		i40evf_free_queues(adapter);
+		kfree(adapter->vf_res);
+		i40evf_shutdown_adminq(hw);
+		adapter->netdev->flags &= ~IFF_UP;
+		clear_bit(__I40EVF_IN_CRITICAL_TASK, &adapter->crit_section);
+		return; /* Do not attempt to reinit. It's dead, Jim. */
 	}
+
+continue_reset:
+	adapter->flags &= ~I40EVF_FLAG_RESET_PENDING;
+
 	i40evf_down(adapter);
 	adapter->state = __I40EVF_RESETTING;
 
@@ -1506,6 +1575,9 @@ static void i40evf_adminq_task(struct work_struct *work)
 	i40e_status ret;
 	u16 pending;
 
+	if (adapter->flags & I40EVF_FLAG_PF_COMMS_FAILED)
+		return;
+
 	event.msg_size = I40EVF_MAX_AQ_BUF_SIZE;
 	event.msg_buf = kzalloc(event.msg_size, GFP_KERNEL);
 	if (!event.msg_buf) {
@@ -1637,6 +1709,10 @@ static int i40evf_open(struct net_device *netdev)
 	struct i40evf_adapter *adapter = netdev_priv(netdev);
 	int err;
 
+	if (adapter->flags & I40EVF_FLAG_PF_COMMS_FAILED) {
+		dev_err(&adapter->pdev->dev, "Unable to open device due to PF driver failure.\n");
+		return -EIO;
+	}
 	if (adapter->state != __I40EVF_DOWN)
 		return -EBUSY;
 
@@ -1691,8 +1767,12 @@ static int i40evf_close(struct net_device *netdev)
 {
 	struct i40evf_adapter *adapter = netdev_priv(netdev);
 
+	if (adapter->state <= __I40EVF_DOWN)
+		return 0;
+
 	/* signal that we are down to the interrupt handler */
 	adapter->state = __I40EVF_DOWN;
+
 	set_bit(__I40E_DOWN, &adapter->vsi.state);
 
 	i40evf_down(adapter);
@@ -1843,6 +1923,8 @@ static void i40evf_init_task(struct work_struct *work)
 	switch (adapter->state) {
 	case __I40EVF_STARTUP:
 		/* driver loaded, probe complete */
+		adapter->flags &= ~I40EVF_FLAG_PF_COMMS_FAILED;
+		adapter->flags &= ~I40EVF_FLAG_RESET_PENDING;
 		err = i40e_set_mac_type(hw);
 		if (err) {
 			dev_info(&pdev->dev, "%s: set_mac_type failed: %d\n",
@@ -2006,9 +2088,11 @@ static void i40evf_init_task(struct work_struct *work)
 	adapter->vsi.tx_itr_setting = I40E_ITR_DYNAMIC;
 	adapter->vsi.netdev = adapter->netdev;
 
-	err = register_netdev(netdev);
-	if (err)
-		goto err_register;
+	if (!adapter->netdev_registered) {
+		err = register_netdev(netdev);
+		if (err)
+			goto err_register;
+	}
 
 	adapter->netdev_registered = true;
 
@@ -2032,17 +2116,16 @@ err_register:
 	i40evf_free_misc_irq(adapter);
 err_sw_init:
 	i40evf_reset_interrupt_capability(adapter);
-	adapter->state = __I40EVF_FAILED;
 err_alloc:
 	kfree(adapter->vf_res);
 	adapter->vf_res = NULL;
 err:
+	if (hw->aq.asq.count)
+		i40evf_shutdown_adminq(hw); /* ignore error */
 	/* Things went into the weeds, so try again later */
 	if (++adapter->aq_wait_count > I40EVF_AQ_MAX_ERR) {
 		dev_err(&pdev->dev, "Failed to communicate with PF; giving up.\n");
-		if (hw->aq.asq.count)
-			i40evf_shutdown_adminq(hw); /* ignore error */
-		adapter->state = __I40EVF_FAILED;
+		adapter->flags |= I40EVF_FLAG_PF_COMMS_FAILED;
 		return; /* do not reschedule */
 	}
 	schedule_delayed_work(&adapter->init_task, HZ * 3);
@@ -2272,6 +2355,7 @@ static void i40evf_remove(struct pci_dev *pdev)
 	struct i40e_hw *hw = &adapter->hw;
 
 	cancel_delayed_work_sync(&adapter->init_task);
+	cancel_work_sync(&adapter->reset_task);
 
 	if (adapter->netdev_registered) {
 		unregister_netdev(netdev);
diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_virtchnl.c b/drivers/net/ethernet/intel/i40evf/i40evf_virtchnl.c
index e6978d79e62b..93891a114d3f 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_virtchnl.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_virtchnl.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
  *
  * Intel Ethernet Controller XL710 Family Linux Virtual Function Driver
- * Copyright(c) 2013 Intel Corporation.
+ * Copyright(c) 2013 - 2014 Intel Corporation.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -43,6 +43,9 @@ static int i40evf_send_pf_msg(struct i40evf_adapter *adapter,
 	struct i40e_hw *hw = &adapter->hw;
 	i40e_status err;
 
+	if (adapter->flags & I40EVF_FLAG_PF_COMMS_FAILED)
+		return 0; /* nothing to see here, move along */
+
 	err = i40e_aq_send_msg_to_pf(hw, op, 0, msg, len, NULL);
 	if (err)
 		dev_err(&adapter->pdev->dev, "Unable to send opcode %d to PF, error %d, aq status %d\n",
@@ -689,10 +692,12 @@ void i40evf_virtchnl_completion(struct i40evf_adapter *adapter,
 			}
 			break;
 		case I40E_VIRTCHNL_EVENT_RESET_IMPENDING:
-			adapter->state = __I40EVF_RESETTING;
-			schedule_work(&adapter->reset_task);
-			dev_info(&adapter->pdev->dev,
-				 "%s: hardware reset pending\n", __func__);
+			dev_info(&adapter->pdev->dev, "PF reset warning received\n");
+			if (!(adapter->flags & I40EVF_FLAG_RESET_PENDING)) {
+				adapter->flags |= I40EVF_FLAG_RESET_PENDING;
+				dev_info(&adapter->pdev->dev, "Scheduling reset task\n");
+				schedule_work(&adapter->reset_task);
+			}
 			break;
 		default:
 			dev_err(&adapter->pdev->dev,
-- 
cgit v1.2.2


From 25f929fbff0d1bcebf2e92656d33025cd330cbf8 Mon Sep 17 00:00:00 2001
From: WANG Cong <xiyou.wangcong@gmail.com>
Date: Tue, 11 Feb 2014 17:21:26 -0800
Subject: net: allow setting mac address of loopback device

We are trying to mirror the local traffic from lo to eth0,
allowing setting mac address of lo to eth0 would make
the ether addresses in these packets correct, so that
we don't have to modify the ether header again.

Since usually no one cares about its mac address (all-zero),
it is safe to allow those who care to set its mac address.

Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/loopback.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/loopback.c b/drivers/net/loopback.c
index c5011e078e1b..e7c1d5f8ab51 100644
--- a/drivers/net/loopback.c
+++ b/drivers/net/loopback.c
@@ -160,6 +160,7 @@ static const struct net_device_ops loopback_ops = {
 	.ndo_init      = loopback_dev_init,
 	.ndo_start_xmit= loopback_xmit,
 	.ndo_get_stats64 = loopback_get_stats64,
+	.ndo_set_mac_address = eth_mac_addr,
 };
 
 /*
@@ -174,6 +175,7 @@ static void loopback_setup(struct net_device *dev)
 	dev->tx_queue_len	= 0;
 	dev->type		= ARPHRD_LOOPBACK;	/* 0x0001*/
 	dev->flags		= IFF_LOOPBACK;
+	dev->priv_flags		|= IFF_LIVE_ADDR_CHANGE;
 	dev->priv_flags	       &= ~IFF_XMIT_DST_RELEASE;
 	dev->hw_features	= NETIF_F_ALL_TSO | NETIF_F_UFO;
 	dev->features 		= NETIF_F_SG | NETIF_F_FRAGLIST
-- 
cgit v1.2.2


From 805d157e8f4273eeafeeab53c3a5d295ac0d9208 Mon Sep 17 00:00:00 2001
From: dingtianhong <dingtianhong@huawei.com>
Date: Wed, 12 Feb 2014 14:58:49 +0800
Subject: bonding: remove the redundant judgements for bond_set_mac_address()

The dev_set_mac_address() will check the dev->netdev_ops->ndo_set_mac_address,
so no need to check it in bond_set_mac_address().

Cc: Jay Vosburgh <fubar@us.ibm.com>
Cc: Veaceslav Falico <vfalico@redhat.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Reviewed-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_main.c | 8 --------
 1 file changed, 8 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 71ba18efa15b..58aa531d7850 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -3461,15 +3461,7 @@ static int bond_set_mac_address(struct net_device *bond_dev, void *addr)
 	 */
 
 	bond_for_each_slave(bond, slave, iter) {
-		const struct net_device_ops *slave_ops = slave->dev->netdev_ops;
 		pr_debug("slave %p %s\n", slave, slave->dev->name);
-
-		if (slave_ops->ndo_set_mac_address == NULL) {
-			res = -EOPNOTSUPP;
-			pr_debug("EOPNOTSUPP %s\n", slave->dev->name);
-			goto unwind;
-		}
-
 		res = dev_set_mac_address(slave->dev, addr);
 		if (res) {
 			/* TODO: consider downing the slave
-- 
cgit v1.2.2


From c313c89edb93eeac0646dcc6d6cb7fb404d4056d Mon Sep 17 00:00:00 2001
From: dingtianhong <dingtianhong@huawei.com>
Date: Wed, 12 Feb 2014 14:58:50 +0800
Subject: bonding: remove the redundant judgements for
 bond_option_queue_id_set()

The dev_valid_name() will check the buffer length for input name, no need to
check it twice.

Cc: Jay Vosburgh <fubar@us.ibm.com>
Cc: Veaceslav Falico <vfalico@redhat.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Reviewed-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_options.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_options.c b/drivers/net/bonding/bond_options.c
index 11cb943222d5..832d6e90b1b9 100644
--- a/drivers/net/bonding/bond_options.c
+++ b/drivers/net/bonding/bond_options.c
@@ -1199,8 +1199,7 @@ int bond_option_queue_id_set(struct bonding *bond,
 		goto err_no_cmd;
 
 	/* Check buffer length, valid ifname and queue id */
-	if (strlen(newval->string) > IFNAMSIZ ||
-	    !dev_valid_name(newval->string) ||
+	if (!dev_valid_name(newval->string) ||
 	    qid > bond->dev->real_num_tx_queues)
 		goto err_no_cmd;
 
-- 
cgit v1.2.2


From 730c8c69bc8d4640336885e20e719b0842d0fcb2 Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Date: Fri, 14 Feb 2014 03:05:42 +0300
Subject: sh_eth: use ETH_ZLEN instead of home-grown #define

The driver #define's and uses ETHERSMALL macro for the minimum Ethernet frame
size for which we have a standard macro ETH_ZLEN.  Use the latter  instead of
the home-grown one.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/renesas/sh_eth.c | 4 ++--
 drivers/net/ethernet/renesas/sh_eth.h | 3 +--
 2 files changed, 3 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index 040cb94e8219..88b40b514cb2 100644
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -2098,8 +2098,8 @@ static int sh_eth_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 				 skb->len + 2);
 	txdesc->addr = dma_map_single(&ndev->dev, skb->data, skb->len,
 				      DMA_TO_DEVICE);
-	if (skb->len < ETHERSMALL)
-		txdesc->buffer_length = ETHERSMALL;
+	if (skb->len < ETH_ZLEN)
+		txdesc->buffer_length = ETH_ZLEN;
 	else
 		txdesc->buffer_length = skb->len;
 
diff --git a/drivers/net/ethernet/renesas/sh_eth.h b/drivers/net/ethernet/renesas/sh_eth.h
index 6075915b88ec..d55e37cd5fec 100644
--- a/drivers/net/ethernet/renesas/sh_eth.h
+++ b/drivers/net/ethernet/renesas/sh_eth.h
@@ -27,8 +27,7 @@
 #define RX_RING_MIN	64
 #define TX_RING_MAX	1024
 #define RX_RING_MAX	1024
-#define ETHERSMALL		60
-#define PKT_BUF_SZ		1538
+#define PKT_BUF_SZ	1538
 #define SH_ETH_TSU_TIMEOUT_MS	500
 #define SH_ETH_TSU_CAM_ENTRIES	32
 
-- 
cgit v1.2.2


From eb0eecc136c917053c2e1b7eac8b8e8e2ebb3e6c Mon Sep 17 00:00:00 2001
From: Somnath Kotur <somnath.kotur@emulex.com>
Date: Wed, 12 Feb 2014 16:07:54 +0530
Subject: be2net: Log a kernel message when UE is detected in BE & Skyhawk

This patch logs a kernel message when a HW error(SLIPORT_ERROR in Lancer and UE
in BEx/Skyhawk) is detected. The log message for BE3 was missing earlier.
This patch also refactors the code by segregating error-detection and reporting
code for Lancer and BEx/SH.

Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/emulex/benet/be_main.c | 82 ++++++++++++++---------------
 1 file changed, 41 insertions(+), 41 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 04ac9c6a0d39..7057545c5f2f 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -2423,6 +2423,9 @@ void be_detect_error(struct be_adapter *adapter)
 	u32 ue_lo = 0, ue_hi = 0, ue_lo_mask = 0, ue_hi_mask = 0;
 	u32 sliport_status = 0, sliport_err1 = 0, sliport_err2 = 0;
 	u32 i;
+	bool error_detected = false;
+	struct device *dev = &adapter->pdev->dev;
+	struct net_device *netdev = adapter->netdev;
 
 	if (be_hw_error(adapter))
 		return;
@@ -2434,6 +2437,21 @@ void be_detect_error(struct be_adapter *adapter)
 					SLIPORT_ERROR1_OFFSET);
 			sliport_err2 = ioread32(adapter->db +
 					SLIPORT_ERROR2_OFFSET);
+			adapter->hw_error = true;
+			/* Do not log error messages if its a FW reset */
+			if (sliport_err1 == SLIPORT_ERROR_FW_RESET1 &&
+			    sliport_err2 == SLIPORT_ERROR_FW_RESET2) {
+				dev_info(dev, "Firmware update in progress\n");
+			} else {
+				error_detected = true;
+				dev_err(dev, "Error detected in the card\n");
+				dev_err(dev, "ERR: sliport status 0x%x\n",
+					sliport_status);
+				dev_err(dev, "ERR: sliport error1 0x%x\n",
+					sliport_err1);
+				dev_err(dev, "ERR: sliport error2 0x%x\n",
+					sliport_err2);
+			}
 		}
 	} else {
 		pci_read_config_dword(adapter->pdev,
@@ -2447,51 +2465,33 @@ void be_detect_error(struct be_adapter *adapter)
 
 		ue_lo = (ue_lo & ~ue_lo_mask);
 		ue_hi = (ue_hi & ~ue_hi_mask);
-	}
-
-	/* On certain platforms BE hardware can indicate spurious UEs.
-	 * Allow the h/w to stop working completely in case of a real UE.
-	 * Hence not setting the hw_error for UE detection.
-	 */
-	if (sliport_status & SLIPORT_STATUS_ERR_MASK) {
-		adapter->hw_error = true;
-		/* Do not log error messages if its a FW reset */
-		if (sliport_err1 == SLIPORT_ERROR_FW_RESET1 &&
-		    sliport_err2 == SLIPORT_ERROR_FW_RESET2) {
-			dev_info(&adapter->pdev->dev,
-				 "Firmware update in progress\n");
-			return;
-		} else {
-			dev_err(&adapter->pdev->dev,
-				"Error detected in the card\n");
-		}
-	}
 
-	if (sliport_status & SLIPORT_STATUS_ERR_MASK) {
-		dev_err(&adapter->pdev->dev,
-			"ERR: sliport status 0x%x\n", sliport_status);
-		dev_err(&adapter->pdev->dev,
-			"ERR: sliport error1 0x%x\n", sliport_err1);
-		dev_err(&adapter->pdev->dev,
-			"ERR: sliport error2 0x%x\n", sliport_err2);
-	}
-
-	if (ue_lo) {
-		for (i = 0; ue_lo; ue_lo >>= 1, i++) {
-			if (ue_lo & 1)
-				dev_err(&adapter->pdev->dev,
-				"UE: %s bit set\n", ue_status_low_desc[i]);
-		}
-	}
+		/* On certain platforms BE hardware can indicate spurious UEs.
+		 * Allow HW to stop working completely in case of a real UE.
+		 * Hence not setting the hw_error for UE detection.
+		 */
 
-	if (ue_hi) {
-		for (i = 0; ue_hi; ue_hi >>= 1, i++) {
-			if (ue_hi & 1)
-				dev_err(&adapter->pdev->dev,
-				"UE: %s bit set\n", ue_status_hi_desc[i]);
+		if (ue_lo || ue_hi) {
+			error_detected = true;
+			dev_err(dev,
+				"Unrecoverable Error detected in the adapter");
+			dev_err(dev, "Please reboot server to recover");
+			if (skyhawk_chip(adapter))
+				adapter->hw_error = true;
+			for (i = 0; ue_lo; ue_lo >>= 1, i++) {
+				if (ue_lo & 1)
+					dev_err(dev, "UE: %s bit set\n",
+						ue_status_low_desc[i]);
+			}
+			for (i = 0; ue_hi; ue_hi >>= 1, i++) {
+				if (ue_hi & 1)
+					dev_err(dev, "UE: %s bit set\n",
+						ue_status_hi_desc[i]);
+			}
 		}
 	}
-
+	if (error_detected)
+		netif_carrier_off(netdev);
 }
 
 static void be_msix_disable(struct be_adapter *adapter)
-- 
cgit v1.2.2


From 40263820b4488971c6623d938be663020d6e916d Mon Sep 17 00:00:00 2001
From: Vasundhara Volam <vasundhara.volam@emulex.com>
Date: Wed, 12 Feb 2014 16:09:07 +0530
Subject: be2net: Update copyright year

Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/emulex/benet/be.h         | 2 +-
 drivers/net/ethernet/emulex/benet/be_cmds.c    | 2 +-
 drivers/net/ethernet/emulex/benet/be_cmds.h    | 2 +-
 drivers/net/ethernet/emulex/benet/be_ethtool.c | 2 +-
 drivers/net/ethernet/emulex/benet/be_hw.h      | 2 +-
 drivers/net/ethernet/emulex/benet/be_main.c    | 2 +-
 drivers/net/ethernet/emulex/benet/be_roce.c    | 2 +-
 drivers/net/ethernet/emulex/benet/be_roce.h    | 2 +-
 8 files changed, 8 insertions(+), 8 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h
index 8d09615da585..6c05f57eca2f 100644
--- a/drivers/net/ethernet/emulex/benet/be.h
+++ b/drivers/net/ethernet/emulex/benet/be.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2005 - 2013 Emulex
+ * Copyright (C) 2005 - 2014 Emulex
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c
index 48076a6370c3..a8106b3644dd 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.c
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2005 - 2013 Emulex
+ * Copyright (C) 2005 - 2014 Emulex
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.h b/drivers/net/ethernet/emulex/benet/be_cmds.h
index fc4e076dc202..39595667598b 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.h
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2005 - 2013 Emulex
+ * Copyright (C) 2005 - 2014 Emulex
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
diff --git a/drivers/net/ethernet/emulex/benet/be_ethtool.c b/drivers/net/ethernet/emulex/benet/be_ethtool.c
index 05be0070f55f..cf09d8faca84 100644
--- a/drivers/net/ethernet/emulex/benet/be_ethtool.c
+++ b/drivers/net/ethernet/emulex/benet/be_ethtool.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2005 - 2013 Emulex
+ * Copyright (C) 2005 - 2014 Emulex
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
diff --git a/drivers/net/ethernet/emulex/benet/be_hw.h b/drivers/net/ethernet/emulex/benet/be_hw.h
index dc88782185f2..effa272a62c7 100644
--- a/drivers/net/ethernet/emulex/benet/be_hw.h
+++ b/drivers/net/ethernet/emulex/benet/be_hw.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2005 - 2013 Emulex
+ * Copyright (C) 2005 - 2014 Emulex
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 7057545c5f2f..816d67b203c0 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2005 - 2013 Emulex
+ * Copyright (C) 2005 - 2014 Emulex
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
diff --git a/drivers/net/ethernet/emulex/benet/be_roce.c b/drivers/net/ethernet/emulex/benet/be_roce.c
index 9cd5415fe017..a5dae4a62bb3 100644
--- a/drivers/net/ethernet/emulex/benet/be_roce.c
+++ b/drivers/net/ethernet/emulex/benet/be_roce.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2005 - 2013 Emulex
+ * Copyright (C) 2005 - 2014 Emulex
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
diff --git a/drivers/net/ethernet/emulex/benet/be_roce.h b/drivers/net/ethernet/emulex/benet/be_roce.h
index 2cd1129e19af..a3ef8f804b9e 100644
--- a/drivers/net/ethernet/emulex/benet/be_roce.h
+++ b/drivers/net/ethernet/emulex/benet/be_roce.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2005 - 2013 Emulex
+ * Copyright (C) 2005 - 2014 Emulex
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
-- 
cgit v1.2.2


From f93f160b5a3546b6d3143894f63a326442071e48 Mon Sep 17 00:00:00 2001
From: Vasundhara Volam <vasundhara.volam@emulex.com>
Date: Wed, 12 Feb 2014 16:09:25 +0530
Subject: be2net: refactor multi-channel config code for Skyhawk-R chip

Currently multi-channel configuration is read via the QUERY_FW_CONFIG cmd.
This method has been deprecated by the Skyhawk-R FW. Instead,
GET_PROFILE_CONFIG::port-desc must be used to query this configuration.

This patch also:
a) introduces a few macros to identify certain categories of multi-channel
configs
2) re-factors the be_cmd_set_profile_config() code to be able to read any kind
of desc (and not just the nic-desc.)

Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/emulex/benet/be.h      | 12 +++-
 drivers/net/ethernet/emulex/benet/be_cmds.c | 20 +++++++
 drivers/net/ethernet/emulex/benet/be_cmds.h | 36 +++++++++---
 drivers/net/ethernet/emulex/benet/be_hw.h   |  4 +-
 drivers/net/ethernet/emulex/benet/be_main.c | 87 ++++++++++++++++++++++-------
 5 files changed, 127 insertions(+), 32 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h
index 6c05f57eca2f..a150401a6cb3 100644
--- a/drivers/net/ethernet/emulex/benet/be.h
+++ b/drivers/net/ethernet/emulex/benet/be.h
@@ -88,7 +88,6 @@ static inline char *nic_name(struct pci_dev *pdev)
 #define BE_MIN_MTU		256
 
 #define BE_NUM_VLANS_SUPPORTED	64
-#define BE_UMC_NUM_VLANS_SUPPORTED	15
 #define BE_MAX_EQD		128u
 #define	BE_MAX_TX_FRAG_COUNT	30
 
@@ -293,7 +292,7 @@ struct be_rx_compl_info {
 	u8 ip_csum;
 	u8 l4_csum;
 	u8 ipv6;
-	u8 vtm;
+	u8 qnq;
 	u8 pkt_type;
 	u8 ip_frag;
 };
@@ -465,6 +464,7 @@ struct be_adapter {
 
 	u32 port_num;
 	bool promiscuous;
+	u8 mc_type;
 	u32 function_mode;
 	u32 function_caps;
 	u32 rx_fc;		/* Rx flow control */
@@ -534,6 +534,14 @@ static inline u16 be_max_qs(struct be_adapter *adapter)
 	return min_t(u16, num, num_online_cpus());
 }
 
+/* Is BE in pvid_tagging mode */
+#define be_pvid_tagging_enabled(adapter)	(adapter->pvid)
+
+/* Is BE in QNQ multi-channel mode */
+#define be_is_qnq_mode(adapter)		(adapter->mc_type == FLEX10 ||  \
+					 adapter->mc_type == vNIC1 ||	\
+					 adapter->mc_type == UFP)
+
 #define lancer_chip(adapter)	(adapter->pdev->device == OC_DEVICE_ID3 || \
 				 adapter->pdev->device == OC_DEVICE_ID4)
 
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c
index a8106b3644dd..72bde5d1c358 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.c
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.c
@@ -3296,6 +3296,21 @@ static struct be_pcie_res_desc *be_get_pcie_desc(u8 devfn, u8 *buf,
 	return NULL;
 }
 
+static struct be_port_res_desc *be_get_port_desc(u8 *buf, u32 desc_count)
+{
+	struct be_res_desc_hdr *hdr = (struct be_res_desc_hdr *)buf;
+	int i;
+
+	for (i = 0; i < desc_count; i++) {
+		if (hdr->desc_type == PORT_RESOURCE_DESC_TYPE_V1)
+			return (struct be_port_res_desc *)hdr;
+
+		hdr->desc_len = hdr->desc_len ? : RESOURCE_DESC_SIZE_V0;
+		hdr = (void *)hdr + hdr->desc_len;
+	}
+	return NULL;
+}
+
 static void be_copy_nic_desc(struct be_resources *res,
 			     struct be_nic_res_desc *desc)
 {
@@ -3439,6 +3454,7 @@ int be_cmd_get_profile_config(struct be_adapter *adapter,
 {
 	struct be_cmd_resp_get_profile_config *resp;
 	struct be_pcie_res_desc *pcie;
+	struct be_port_res_desc *port;
 	struct be_nic_res_desc *nic;
 	struct be_queue_info *mccq = &adapter->mcc_obj.q;
 	struct be_dma_mem cmd;
@@ -3466,6 +3482,10 @@ int be_cmd_get_profile_config(struct be_adapter *adapter,
 	if (pcie)
 		res->max_vfs = le16_to_cpu(pcie->num_vfs);
 
+	port = be_get_port_desc(resp->func_param, desc_count);
+	if (port)
+		adapter->mc_type = port->mc_type;
+
 	nic = be_get_nic_desc(resp->func_param, desc_count);
 	if (nic)
 		be_copy_nic_desc(res, nic);
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.h b/drivers/net/ethernet/emulex/benet/be_cmds.h
index 39595667598b..d0ab980f77ea 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.h
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.h
@@ -1098,14 +1098,6 @@ struct be_cmd_resp_query_fw_cfg {
 	u32 function_caps;
 };
 
-/* Is BE in a multi-channel mode */
-static inline bool be_is_mc(struct be_adapter *adapter)
-{
-	return adapter->function_mode & FLEX10_MODE ||
-		adapter->function_mode & VNIC_MODE ||
-		adapter->function_mode & UMC_ENABLED;
-}
-
 /******************** RSS Config ****************************************/
 /* RSS type		Input parameters used to compute RX hash
  * RSS_ENABLE_IPV4	SRC IPv4, DST IPv4
@@ -1828,6 +1820,7 @@ struct be_cmd_req_set_ext_fat_caps {
 #define NIC_RESOURCE_DESC_TYPE_V0		0x41
 #define PCIE_RESOURCE_DESC_TYPE_V1		0x50
 #define NIC_RESOURCE_DESC_TYPE_V1		0x51
+#define PORT_RESOURCE_DESC_TYPE_V1		0x55
 #define MAX_RESOURCE_DESC			264
 
 /* QOS unit number */
@@ -1891,6 +1884,33 @@ struct be_nic_res_desc {
 	u32 rsvd8[7];
 } __packed;
 
+/************ Multi-Channel type ***********/
+enum mc_type {
+	MC_NONE = 0x01,
+	UMC = 0x02,
+	FLEX10 = 0x03,
+	vNIC1 = 0x04,
+	nPAR = 0x05,
+	UFP = 0x06,
+	vNIC2 = 0x07
+};
+
+struct be_port_res_desc {
+	struct be_res_desc_hdr hdr;
+	u8 rsvd0;
+	u8 flags;
+	u8 rsvd1;
+	u8 mc_type;
+	u16 rsvd2;
+	u32 rsvd3[20];
+} __packed;
+
+/* Is BE in a multi-channel mode */
+static inline bool be_is_mc(struct be_adapter *adapter)
+{
+	return adapter->mc_type > MC_NONE;
+}
+
 struct be_cmd_req_get_func_config {
 	struct be_cmd_req_hdr hdr;
 };
diff --git a/drivers/net/ethernet/emulex/benet/be_hw.h b/drivers/net/ethernet/emulex/benet/be_hw.h
index effa272a62c7..28ac8dd0beaa 100644
--- a/drivers/net/ethernet/emulex/benet/be_hw.h
+++ b/drivers/net/ethernet/emulex/benet/be_hw.h
@@ -368,7 +368,7 @@ struct amap_eth_rx_compl_v0 {
 	u8 numfrags[3];		/* dword 1 */
 	u8 rss_flush;		/* dword 2 */
 	u8 cast_enc[2];		/* dword 2 */
-	u8 vtm;			/* dword 2 */
+	u8 qnq;			/* dword 2 */
 	u8 rss_bank;		/* dword 2 */
 	u8 rsvd1[23];		/* dword 2 */
 	u8 lro_pkt;		/* dword 2 */
@@ -401,7 +401,7 @@ struct amap_eth_rx_compl_v1 {
 	u8 numfrags[3];		/* dword 1 */
 	u8 rss_flush;		/* dword 2 */
 	u8 cast_enc[2];		/* dword 2 */
-	u8 vtm;			/* dword 2 */
+	u8 qnq;			/* dword 2 */
 	u8 rss_bank;		/* dword 2 */
 	u8 port[2];		/* dword 2 */
 	u8 vntagp;		/* dword 2 */
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 816d67b203c0..a8cf03ed2de6 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -945,9 +945,9 @@ static struct sk_buff *be_xmit_workarounds(struct be_adapter *adapter,
 	}
 
 	/* If vlan tag is already inlined in the packet, skip HW VLAN
-	 * tagging in UMC mode
+	 * tagging in pvid-tagging mode
 	 */
-	if ((adapter->function_mode & UMC_ENABLED) &&
+	if (be_pvid_tagging_enabled(adapter) &&
 	    veh->h_vlan_proto == htons(ETH_P_8021Q))
 			*skip_hw_vlan = true;
 
@@ -1660,7 +1660,7 @@ static void be_parse_rx_compl_v1(struct be_eth_rx_compl *compl,
 	rxcp->rss_hash =
 		AMAP_GET_BITS(struct amap_eth_rx_compl_v1, rsshash, compl);
 	if (rxcp->vlanf) {
-		rxcp->vtm = AMAP_GET_BITS(struct amap_eth_rx_compl_v1, vtm,
+		rxcp->qnq = AMAP_GET_BITS(struct amap_eth_rx_compl_v1, qnq,
 					  compl);
 		rxcp->vlan_tag = AMAP_GET_BITS(struct amap_eth_rx_compl_v1, vlan_tag,
 					       compl);
@@ -1690,7 +1690,7 @@ static void be_parse_rx_compl_v0(struct be_eth_rx_compl *compl,
 	rxcp->rss_hash =
 		AMAP_GET_BITS(struct amap_eth_rx_compl_v0, rsshash, compl);
 	if (rxcp->vlanf) {
-		rxcp->vtm = AMAP_GET_BITS(struct amap_eth_rx_compl_v0, vtm,
+		rxcp->qnq = AMAP_GET_BITS(struct amap_eth_rx_compl_v0, qnq,
 					  compl);
 		rxcp->vlan_tag = AMAP_GET_BITS(struct amap_eth_rx_compl_v0, vlan_tag,
 					       compl);
@@ -1723,9 +1723,11 @@ static struct be_rx_compl_info *be_rx_compl_get(struct be_rx_obj *rxo)
 		rxcp->l4_csum = 0;
 
 	if (rxcp->vlanf) {
-		/* vlanf could be wrongly set in some cards.
-		 * ignore if vtm is not set */
-		if ((adapter->function_mode & FLEX10_MODE) && !rxcp->vtm)
+		/* In QNQ modes, if qnq bit is not set, then the packet was
+		 * tagged only with the transparent outer vlan-tag and must
+		 * not be treated as a vlan packet by host
+		 */
+		if (be_is_qnq_mode(adapter) && !rxcp->qnq)
 			rxcp->vlanf = 0;
 
 		if (!lancer_chip(adapter))
@@ -3109,6 +3111,22 @@ err:
 	return status;
 }
 
+/* Converting function_mode bits on BE3 to SH mc_type enums */
+
+static u8 be_convert_mc_type(u32 function_mode)
+{
+	if (function_mode & VNIC_MODE && function_mode & FLEX10_MODE)
+		return vNIC1;
+	else if (function_mode & FLEX10_MODE)
+		return FLEX10;
+	else if (function_mode & VNIC_MODE)
+		return vNIC2;
+	else if (function_mode & UMC_ENABLED)
+		return UMC;
+	else
+		return MC_NONE;
+}
+
 /* On BE2/BE3 FW does not suggest the supported limits */
 static void BEx_get_resources(struct be_adapter *adapter,
 			      struct be_resources *res)
@@ -3129,12 +3147,23 @@ static void BEx_get_resources(struct be_adapter *adapter,
 	else
 		res->max_uc_mac = BE_VF_UC_PMAC_COUNT;
 
-	if (adapter->function_mode & FLEX10_MODE)
-		res->max_vlans = BE_NUM_VLANS_SUPPORTED/8;
-	else if (adapter->function_mode & UMC_ENABLED)
-		res->max_vlans = BE_UMC_NUM_VLANS_SUPPORTED;
-	else
+	adapter->mc_type = be_convert_mc_type(adapter->function_mode);
+
+	if (be_is_mc(adapter)) {
+		/* Assuming that there are 4 channels per port,
+		 * when multi-channel is enabled
+		 */
+		if (be_is_qnq_mode(adapter))
+			res->max_vlans = BE_NUM_VLANS_SUPPORTED/8;
+		else
+			/* In a non-qnq multichannel mode, the pvid
+			 * takes up one vlan entry
+			 */
+			res->max_vlans = (BE_NUM_VLANS_SUPPORTED / 4) - 1;
+	} else {
 		res->max_vlans = BE_NUM_VLANS_SUPPORTED;
+	}
+
 	res->max_mcast_mac = BE_MAX_MC;
 
 	/* For BE3 1Gb ports, F/W does not properly support multiple TXQs */
@@ -4417,14 +4446,32 @@ static bool be_reset_required(struct be_adapter *adapter)
 
 static char *mc_name(struct be_adapter *adapter)
 {
-	if (adapter->function_mode & FLEX10_MODE)
-		return "FLEX10";
-	else if (adapter->function_mode & VNIC_MODE)
-		return "vNIC";
-	else if (adapter->function_mode & UMC_ENABLED)
-		return "UMC";
-	else
-		return "";
+	char *str = "";	/* default */
+
+	switch (adapter->mc_type) {
+	case UMC:
+		str = "UMC";
+		break;
+	case FLEX10:
+		str = "FLEX10";
+		break;
+	case vNIC1:
+		str = "vNIC-1";
+		break;
+	case nPAR:
+		str = "nPAR";
+		break;
+	case UFP:
+		str = "UFP";
+		break;
+	case vNIC2:
+		str = "vNIC-2";
+		break;
+	default:
+		str = "";
+	}
+
+	return str;
 }
 
 static inline char *func_name(struct be_adapter *adapter)
-- 
cgit v1.2.2


From c88838ce89515331ac835a470dc51ddf574770b1 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Thu, 13 Feb 2014 16:08:43 -0800
Subject: net: phy: update port type for MoCA PHYs

MoCA PHYs are using coaxial (BNC-like) connectors, update the
transceiver port type when replying to ethtool.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/phy.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index fc918b63dc65..643b5d665f41 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -305,7 +305,10 @@ int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd)
 
 	ethtool_cmd_speed_set(cmd, phydev->speed);
 	cmd->duplex = phydev->duplex;
-	cmd->port = PORT_MII;
+	if (phydev->interface == PHY_INTERFACE_MODE_MOCA)
+		cmd->port = PORT_BNC;
+	else
+		cmd->port = PORT_MII;
 	cmd->phy_address = phydev->addr;
 	cmd->transceiver = phy_is_internal(phydev) ?
 		XCVR_INTERNAL : XCVR_EXTERNAL;
-- 
cgit v1.2.2


From 439d39a9ac8fbbba9c04581361188f33f21ced50 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Thu, 13 Feb 2014 16:08:44 -0800
Subject: net: phy: broadcom: extract register definitions

The Broadcom BCM54xx register definitions are shared between BCM54xx and
BCM7xx internal PHYs for which we are adding support. Extract these
register definitions and put them in include/linux/brcmphy.h for use by
the BCM7xxx internal PHY driver.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/broadcom.c | 52 ----------------------------------------------
 1 file changed, 52 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index f8c90ea75108..34088d60da74 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -25,58 +25,6 @@
 #define BRCM_PHY_REV(phydev) \
 	((phydev)->drv->phy_id & ~((phydev)->drv->phy_id_mask))
 
-
-#define MII_BCM54XX_ECR		0x10	/* BCM54xx extended control register */
-#define MII_BCM54XX_ECR_IM	0x1000	/* Interrupt mask */
-#define MII_BCM54XX_ECR_IF	0x0800	/* Interrupt force */
-
-#define MII_BCM54XX_ESR		0x11	/* BCM54xx extended status register */
-#define MII_BCM54XX_ESR_IS	0x1000	/* Interrupt status */
-
-#define MII_BCM54XX_EXP_DATA	0x15	/* Expansion register data */
-#define MII_BCM54XX_EXP_SEL	0x17	/* Expansion register select */
-#define MII_BCM54XX_EXP_SEL_SSD	0x0e00	/* Secondary SerDes select */
-#define MII_BCM54XX_EXP_SEL_ER	0x0f00	/* Expansion register select */
-
-#define MII_BCM54XX_AUX_CTL	0x18	/* Auxiliary control register */
-#define MII_BCM54XX_ISR		0x1a	/* BCM54xx interrupt status register */
-#define MII_BCM54XX_IMR		0x1b	/* BCM54xx interrupt mask register */
-#define MII_BCM54XX_INT_CRCERR	0x0001	/* CRC error */
-#define MII_BCM54XX_INT_LINK	0x0002	/* Link status changed */
-#define MII_BCM54XX_INT_SPEED	0x0004	/* Link speed change */
-#define MII_BCM54XX_INT_DUPLEX	0x0008	/* Duplex mode changed */
-#define MII_BCM54XX_INT_LRS	0x0010	/* Local receiver status changed */
-#define MII_BCM54XX_INT_RRS	0x0020	/* Remote receiver status changed */
-#define MII_BCM54XX_INT_SSERR	0x0040	/* Scrambler synchronization error */
-#define MII_BCM54XX_INT_UHCD	0x0080	/* Unsupported HCD negotiated */
-#define MII_BCM54XX_INT_NHCD	0x0100	/* No HCD */
-#define MII_BCM54XX_INT_NHCDL	0x0200	/* No HCD link */
-#define MII_BCM54XX_INT_ANPR	0x0400	/* Auto-negotiation page received */
-#define MII_BCM54XX_INT_LC	0x0800	/* All counters below 128 */
-#define MII_BCM54XX_INT_HC	0x1000	/* Counter above 32768 */
-#define MII_BCM54XX_INT_MDIX	0x2000	/* MDIX status change */
-#define MII_BCM54XX_INT_PSERR	0x4000	/* Pair swap error */
-
-#define MII_BCM54XX_SHD		0x1c	/* 0x1c shadow registers */
-#define MII_BCM54XX_SHD_WRITE	0x8000
-#define MII_BCM54XX_SHD_VAL(x)	((x & 0x1f) << 10)
-#define MII_BCM54XX_SHD_DATA(x)	((x & 0x3ff) << 0)
-
-/*
- * AUXILIARY CONTROL SHADOW ACCESS REGISTERS.  (PHY REG 0x18)
- */
-#define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL	0x0000
-#define MII_BCM54XX_AUXCTL_ACTL_TX_6DB		0x0400
-#define MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA	0x0800
-
-#define MII_BCM54XX_AUXCTL_MISC_WREN	0x8000
-#define MII_BCM54XX_AUXCTL_MISC_FORCE_AMDIX	0x0200
-#define MII_BCM54XX_AUXCTL_MISC_RDSEL_MISC	0x7000
-#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC	0x0007
-
-#define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL	0x0000
-
-
 /*
  * Broadcom LED source encodings.  These are used in BCM5461, BCM5481,
  * BCM5482, and possibly some others.
-- 
cgit v1.2.2


From b560a58c45c66f68936127040e86b7f02e4c5332 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Thu, 13 Feb 2014 16:08:45 -0800
Subject: net: phy: add Broadcom BCM7xxx internal PHY driver

This patch adds support for the Broadcom BCM7xxx Set Top Box SoCs
internal PHYs. This driver supports the following generation of SoCs:

- BCM7366, BCM7439, BCM7445 (28nm process)
- all 40nm and 65nm (older MIPS-based SoCs)

The PHYs on these SoCs require a bunch of workarounds to operate
correctly, both during configuration time and at suspend/resume time,
the driver handles that for us.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/Kconfig   |   6 +
 drivers/net/phy/Makefile  |   1 +
 drivers/net/phy/bcm7xxx.c | 343 ++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 350 insertions(+)
 create mode 100644 drivers/net/phy/bcm7xxx.c

(limited to 'drivers/net')

diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 9b5d46c03eed..6a17f92153b3 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -71,6 +71,12 @@ config BCM63XX_PHY
 	---help---
 	  Currently supports the 6348 and 6358 PHYs.
 
+config BCM7XXX_PHY
+	tristate "Drivers for Broadcom 7xxx SOCs internal PHYs"
+	---help---
+	  Currently supports the BCM7366, BCM7439, BCM7445, and
+	  40nm and 65nm generation of BCM7xxx Set Top Box SoCs.
+
 config BCM87XX_PHY
 	tristate "Driver for Broadcom BCM8706 and BCM8727 PHYs"
 	help
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 9013dfa12aa3..07d24024863e 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_SMSC_PHY)		+= smsc.o
 obj-$(CONFIG_VITESSE_PHY)	+= vitesse.o
 obj-$(CONFIG_BROADCOM_PHY)	+= broadcom.o
 obj-$(CONFIG_BCM63XX_PHY)	+= bcm63xx.o
+obj-$(CONFIG_BCM7XXX_PHY)	+= bcm7xxx.o
 obj-$(CONFIG_BCM87XX_PHY)	+= bcm87xx.o
 obj-$(CONFIG_ICPLUS_PHY)	+= icplus.o
 obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c
new file mode 100644
index 000000000000..697337220016
--- /dev/null
+++ b/drivers/net/phy/bcm7xxx.c
@@ -0,0 +1,343 @@
+/*
+ * Broadcom BCM7xxx internal transceivers support.
+ *
+ * Copyright (C) 2014, Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/phy.h>
+#include <linux/delay.h>
+#include <linux/bitops.h>
+#include <linux/brcmphy.h>
+
+/* Broadcom BCM7xxx internal PHY registers */
+#define MII_BCM7XXX_CHANNEL_WIDTH	0x2000
+
+/* 40nm only register definitions */
+#define MII_BCM7XXX_100TX_AUX_CTL	0x10
+#define MII_BCM7XXX_100TX_FALSE_CAR	0x13
+#define MII_BCM7XXX_100TX_DISC		0x14
+#define MII_BCM7XXX_AUX_MODE		0x1d
+#define  MII_BCM7XX_64CLK_MDIO		BIT(12)
+#define MII_BCM7XXX_CORE_BASE1E		0x1e
+#define MII_BCM7XXX_TEST		0x1f
+#define  MII_BCM7XXX_SHD_MODE_2		BIT(2)
+
+static int bcm7445_config_init(struct phy_device *phydev)
+{
+	int ret;
+	const struct bcm7445_regs {
+		int reg;
+		u16 value;
+	} bcm7445_regs_cfg[] = {
+		/* increases ADC latency by 24ns */
+		{ MII_BCM54XX_EXP_SEL, 0x0038 },
+		{ MII_BCM54XX_EXP_DATA, 0xAB95 },
+		/* increases internal 1V LDO voltage by 5% */
+		{ MII_BCM54XX_EXP_SEL, 0x2038 },
+		{ MII_BCM54XX_EXP_DATA, 0xBB22 },
+		/* reduce RX low pass filter corner frequency */
+		{ MII_BCM54XX_EXP_SEL, 0x6038 },
+		{ MII_BCM54XX_EXP_DATA, 0xFFC5 },
+		/* reduce RX high pass filter corner frequency */
+		{ MII_BCM54XX_EXP_SEL, 0x003a },
+		{ MII_BCM54XX_EXP_DATA, 0x2002 },
+	};
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(bcm7445_regs_cfg); i++) {
+		ret = phy_write(phydev,
+				bcm7445_regs_cfg[i].reg,
+				bcm7445_regs_cfg[i].value);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static void phy_write_exp(struct phy_device *phydev,
+					u16 reg, u16 value)
+{
+	phy_write(phydev, MII_BCM54XX_EXP_SEL, MII_BCM54XX_EXP_SEL_ER | reg);
+	phy_write(phydev, MII_BCM54XX_EXP_DATA, value);
+}
+
+static void phy_write_misc(struct phy_device *phydev,
+					u16 reg, u16 chl, u16 value)
+{
+	int tmp;
+
+	phy_write(phydev, MII_BCM54XX_AUX_CTL, MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
+
+	tmp = phy_read(phydev, MII_BCM54XX_AUX_CTL);
+	tmp |= MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA;
+	phy_write(phydev, MII_BCM54XX_AUX_CTL, tmp);
+
+	tmp = (chl * MII_BCM7XXX_CHANNEL_WIDTH) | reg;
+	phy_write(phydev, MII_BCM54XX_EXP_SEL, tmp);
+
+	phy_write(phydev, MII_BCM54XX_EXP_DATA, value);
+}
+
+static int bcm7xxx_28nm_afe_config_init(struct phy_device *phydev)
+{
+	/* write AFE_RXCONFIG_0 */
+	phy_write_misc(phydev, 0x38, 0x0000, 0xeb19);
+
+	/* write AFE_RXCONFIG_1 */
+	phy_write_misc(phydev, 0x38, 0x0001, 0x9a3f);
+
+	/* write AFE_RX_LP_COUNTER */
+	phy_write_misc(phydev, 0x38, 0x0003, 0x7fc7);
+
+	/* write AFE_HPF_TRIM_OTHERS */
+	phy_write_misc(phydev, 0x3A, 0x0000, 0x000b);
+
+	/* write AFTE_TX_CONFIG */
+	phy_write_misc(phydev, 0x39, 0x0000, 0x0800);
+
+	/* Increase VCO range to prevent unlocking problem of PLL at low
+	 * temp
+	 */
+	phy_write_misc(phydev, 0x0032, 0x0001, 0x0048);
+
+	/* Change Ki to 011 */
+	phy_write_misc(phydev, 0x0032, 0x0002, 0x021b);
+
+	/* Disable loading of TVCO buffer to bandgap, set bandgap trim
+	 * to 111
+	 */
+	phy_write_misc(phydev, 0x0033, 0x0000, 0x0e20);
+
+	/* Adjust bias current trim by -3 */
+	phy_write_misc(phydev, 0x000a, 0x0000, 0x690b);
+
+	/* Switch to CORE_BASE1E */
+	phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0xd);
+
+	/* Reset R_CAL/RC_CAL Engine */
+	phy_write_exp(phydev, 0x00b0, 0x0010);
+
+	/* Disable Reset R_CAL/RC_CAL Engine */
+	phy_write_exp(phydev, 0x00b0, 0x0000);
+
+	return 0;
+}
+
+static int bcm7xxx_28nm_config_init(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = bcm7445_config_init(phydev);
+	if (ret)
+		return ret;
+
+	return bcm7xxx_28nm_afe_config_init(phydev);
+}
+
+static int phy_set_clr_bits(struct phy_device *dev, int location,
+					int set_mask, int clr_mask)
+{
+	int v, ret;
+
+	v = phy_read(dev, location);
+	if (v < 0)
+		return v;
+
+	v &= ~clr_mask;
+	v |= set_mask;
+
+	ret = phy_write(dev, location, v);
+	if (ret < 0)
+		return ret;
+
+	return v;
+}
+
+static int bcm7xxx_config_init(struct phy_device *phydev)
+{
+	int ret;
+
+	/* Enable 64 clock MDIO */
+	phy_write(phydev, MII_BCM7XXX_AUX_MODE, MII_BCM7XX_64CLK_MDIO);
+	phy_read(phydev, MII_BCM7XXX_AUX_MODE);
+
+	/* Workaround only required for 100Mbits/sec */
+	if (!(phydev->dev_flags & PHY_BRCM_100MBPS_WAR))
+		return 0;
+
+	/* set shadow mode 2 */
+	ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST,
+			MII_BCM7XXX_SHD_MODE_2, MII_BCM7XXX_SHD_MODE_2);
+	if (ret < 0)
+		return ret;
+
+	/* set iddq_clkbias */
+	phy_write(phydev, MII_BCM7XXX_100TX_DISC, 0x0F00);
+	udelay(10);
+
+	/* reset iddq_clkbias */
+	phy_write(phydev, MII_BCM7XXX_100TX_DISC, 0x0C00);
+
+	phy_write(phydev, MII_BCM7XXX_100TX_FALSE_CAR, 0x7555);
+
+	/* reset shadow mode 2 */
+	ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, MII_BCM7XXX_SHD_MODE_2, 0);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+/* Workaround for putting the PHY in IDDQ mode, required
+ * for all BCM7XXX PHYs
+ */
+static int bcm7xxx_suspend(struct phy_device *phydev)
+{
+	int ret;
+	const struct bcm7xxx_regs {
+		int reg;
+		u16 value;
+	} bcm7xxx_suspend_cfg[] = {
+		{ MII_BCM7XXX_TEST, 0x008b },
+		{ MII_BCM7XXX_100TX_AUX_CTL, 0x01c0 },
+		{ MII_BCM7XXX_100TX_DISC, 0x7000 },
+		{ MII_BCM7XXX_TEST, 0x000f },
+		{ MII_BCM7XXX_100TX_AUX_CTL, 0x20d0 },
+		{ MII_BCM7XXX_TEST, 0x000b },
+	};
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(bcm7xxx_suspend_cfg); i++) {
+		ret = phy_write(phydev,
+				bcm7xxx_suspend_cfg[i].reg,
+				bcm7xxx_suspend_cfg[i].value);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int bcm7xxx_dummy_config_init(struct phy_device *phydev)
+{
+	return 0;
+}
+
+static struct phy_driver bcm7xxx_driver[] = {
+{
+	.phy_id		= PHY_ID_BCM7366,
+	.phy_id_mask	= 0xfffffff0,
+	.name		= "Broadcom BCM7366",
+	.features	= PHY_GBIT_FEATURES |
+			  SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+	.flags		= PHY_IS_INTERNAL,
+	.config_init	= bcm7xxx_28nm_afe_config_init,
+	.config_aneg	= genphy_config_aneg,
+	.read_status	= genphy_read_status,
+	.suspend	= bcm7xxx_suspend,
+	.resume		= bcm7xxx_28nm_afe_config_init,
+	.driver		= { .owner = THIS_MODULE },
+}, {
+	.phy_id		= PHY_ID_BCM7439,
+	.phy_id_mask	= 0xfffffff0,
+	.name		= "Broadcom BCM7439",
+	.features	= PHY_GBIT_FEATURES |
+			  SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+	.flags		= PHY_IS_INTERNAL,
+	.config_init	= bcm7xxx_28nm_afe_config_init,
+	.config_aneg	= genphy_config_aneg,
+	.read_status	= genphy_read_status,
+	.suspend	= bcm7xxx_suspend,
+	.resume		= bcm7xxx_28nm_afe_config_init,
+	.driver		= { .owner = THIS_MODULE },
+}, {
+	.phy_id		= PHY_ID_BCM7445,
+	.phy_id_mask	= 0xfffffff0,
+	.name		= "Broadcom BCM7445",
+	.features	= PHY_GBIT_FEATURES |
+			  SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+	.flags		= PHY_IS_INTERNAL,
+	.config_init	= bcm7xxx_28nm_config_init,
+	.config_aneg	= genphy_config_aneg,
+	.read_status	= genphy_read_status,
+	.suspend	= bcm7xxx_suspend,
+	.resume		= bcm7xxx_28nm_config_init,
+	.driver		= { .owner = THIS_MODULE },
+}, {
+	.name		= "Broadcom BCM7XXX 28nm",
+	.phy_id		= PHY_ID_BCM7XXX_28,
+	.phy_id_mask	= PHY_BCM_OUI_MASK,
+	.features	= PHY_GBIT_FEATURES |
+			  SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+	.flags		= PHY_IS_INTERNAL,
+	.config_init	= bcm7xxx_28nm_config_init,
+	.config_aneg	= genphy_config_aneg,
+	.read_status	= genphy_read_status,
+	.suspend	= bcm7xxx_suspend,
+	.resume		= bcm7xxx_28nm_config_init,
+	.driver		= { .owner = THIS_MODULE },
+}, {
+	.phy_id		= PHY_BCM_OUI_4,
+	.phy_id_mask	= 0xffff0000,
+	.name		= "Broadcom BCM7XXX 40nm",
+	.features	= PHY_GBIT_FEATURES |
+			  SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+	.flags		= PHY_IS_INTERNAL,
+	.config_init	= bcm7xxx_config_init,
+	.config_aneg	= genphy_config_aneg,
+	.read_status	= genphy_read_status,
+	.suspend	= bcm7xxx_suspend,
+	.resume		= bcm7xxx_config_init,
+	.driver		= { .owner = THIS_MODULE },
+}, {
+	.phy_id		= PHY_BCM_OUI_5,
+	.phy_id_mask	= 0xffffff00,
+	.name		= "Broadcom BCM7XXX 65nm",
+	.features	= PHY_BASIC_FEATURES |
+			  SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+	.flags		= PHY_IS_INTERNAL,
+	.config_init	= bcm7xxx_dummy_config_init,
+	.config_aneg	= genphy_config_aneg,
+	.read_status	= genphy_read_status,
+	.suspend	= bcm7xxx_suspend,
+	.resume		= bcm7xxx_config_init,
+	.driver		= { .owner = THIS_MODULE },
+} };
+
+static struct mdio_device_id __maybe_unused bcm7xxx_tbl[] = {
+	{ PHY_ID_BCM7366, 0xfffffff0, },
+	{ PHY_ID_BCM7439, 0xfffffff0, },
+	{ PHY_ID_BCM7445, 0xfffffff0, },
+	{ PHY_ID_BCM7XXX_28, 0xfffffc00 },
+	{ PHY_BCM_OUI_4, 0xffff0000 },
+	{ PHY_BCM_OUI_5, 0xffffff00 },
+	{ }
+};
+
+static int __init bcm7xxx_phy_init(void)
+{
+	return phy_drivers_register(bcm7xxx_driver,
+			ARRAY_SIZE(bcm7xxx_driver));
+}
+
+static void __exit bcm7xxx_phy_exit(void)
+{
+	phy_drivers_unregister(bcm7xxx_driver,
+			ARRAY_SIZE(bcm7xxx_driver));
+}
+
+module_init(bcm7xxx_phy_init);
+module_exit(bcm7xxx_phy_exit);
+
+MODULE_DEVICE_TABLE(mdio, bcm7xxx_tbl);
+
+MODULE_DESCRIPTION("Broadcom BCM7xxx internal PHY driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Broadcom Corporation");
-- 
cgit v1.2.2


From b4af9a559cd971d08cbb58d81d932d8bd1787ade Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Thu, 13 Feb 2014 16:08:46 -0800
Subject: net: bcmgenet: add driver definitions and private structure

This patchs adds the bcmgenet.h header file which contains all the
hardware definitions for the GENETv1 to v4 hardware blocks as well as
the driver private structure and MIB counters.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/genet/bcmgenet.h | 630 +++++++++++++++++++++++++
 1 file changed, 630 insertions(+)
 create mode 100644 drivers/net/ethernet/broadcom/genet/bcmgenet.h

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.h b/drivers/net/ethernet/broadcom/genet/bcmgenet.h
new file mode 100644
index 000000000000..8e48db8a1789
--- /dev/null
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.h
@@ -0,0 +1,630 @@
+/*
+ * Copyright (c) 2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ *
+*/
+#ifndef __BCMGENET_H__
+#define __BCMGENET_H__
+
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/spinlock.h>
+#include <linux/clk.h>
+#include <linux/mii.h>
+#include <linux/if_vlan.h>
+#include <linux/phy.h>
+
+/* total number of Buffer Descriptors, same for Rx/Tx */
+#define TOTAL_DESC				256
+
+/* which ring is descriptor based */
+#define DESC_INDEX				16
+
+/* Body(1500) + EH_SIZE(14) + VLANTAG(4) + BRCMTAG(6) + FCS(4) = 1528.
+ * 1536 is multiple of 256 bytes
+ */
+#define ENET_BRCM_TAG_LEN	6
+#define ENET_PAD		8
+#define ENET_MAX_MTU_SIZE	(ETH_DATA_LEN + ETH_HLEN + VLAN_HLEN + \
+				 ENET_BRCM_TAG_LEN + ETH_FCS_LEN + ENET_PAD)
+#define DMA_MAX_BURST_LENGTH    0x10
+
+/* misc. configuration */
+#define CLEAR_ALL_HFB			0xFF
+#define DMA_FC_THRESH_HI		(TOTAL_DESC >> 4)
+#define DMA_FC_THRESH_LO		5
+
+/* 64B receive/transmit status block */
+struct status_64 {
+	u32	length_status;		/* length and peripheral status */
+	u32	ext_status;		/* Extended status*/
+	u32	rx_csum;		/* partial rx checksum */
+	u32	unused1[9];		/* unused */
+	u32	tx_csum_info;		/* Tx checksum info. */
+	u32	unused2[3];		/* unused */
+};
+
+/* Rx status bits */
+#define STATUS_RX_EXT_MASK		0x1FFFFF
+#define STATUS_RX_CSUM_MASK		0xFFFF
+#define STATUS_RX_CSUM_OK		0x10000
+#define STATUS_RX_CSUM_FR		0x20000
+#define STATUS_RX_PROTO_TCP		0
+#define STATUS_RX_PROTO_UDP		1
+#define STATUS_RX_PROTO_ICMP		2
+#define STATUS_RX_PROTO_OTHER		3
+#define STATUS_RX_PROTO_MASK		3
+#define STATUS_RX_PROTO_SHIFT		18
+#define STATUS_FILTER_INDEX_MASK	0xFFFF
+/* Tx status bits */
+#define STATUS_TX_CSUM_START_MASK	0X7FFF
+#define STATUS_TX_CSUM_START_SHIFT	16
+#define STATUS_TX_CSUM_PROTO_UDP	0x8000
+#define STATUS_TX_CSUM_OFFSET_MASK	0x7FFF
+#define STATUS_TX_CSUM_LV		0x80000000
+
+/* DMA Descriptor */
+#define DMA_DESC_LENGTH_STATUS	0x00	/* in bytes of data in buffer */
+#define DMA_DESC_ADDRESS_LO	0x04	/* lower bits of PA */
+#define DMA_DESC_ADDRESS_HI	0x08	/* upper 32 bits of PA, GENETv4+ */
+
+/* Rx/Tx common counter group */
+struct bcmgenet_pkt_counters {
+	u32	cnt_64;		/* RO Received/Transmited 64 bytes packet */
+	u32	cnt_127;	/* RO Rx/Tx 127 bytes packet */
+	u32	cnt_255;	/* RO Rx/Tx 65-255 bytes packet */
+	u32	cnt_511;	/* RO Rx/Tx 256-511 bytes packet */
+	u32	cnt_1023;	/* RO Rx/Tx 512-1023 bytes packet */
+	u32	cnt_1518;	/* RO Rx/Tx 1024-1518 bytes packet */
+	u32	cnt_mgv;	/* RO Rx/Tx 1519-1522 good VLAN packet */
+	u32	cnt_2047;	/* RO Rx/Tx 1522-2047 bytes packet*/
+	u32	cnt_4095;	/* RO Rx/Tx 2048-4095 bytes packet*/
+	u32	cnt_9216;	/* RO Rx/Tx 4096-9216 bytes packet*/
+};
+
+/* RSV, Receive Status Vector */
+struct bcmgenet_rx_counters {
+	struct  bcmgenet_pkt_counters pkt_cnt;
+	u32	pkt;		/* RO (0x428) Received pkt count*/
+	u32	bytes;		/* RO Received byte count */
+	u32	mca;		/* RO # of Received multicast pkt */
+	u32	bca;		/* RO # of Receive broadcast pkt */
+	u32	fcs;		/* RO # of Received FCS error  */
+	u32	cf;		/* RO # of Received control frame pkt*/
+	u32	pf;		/* RO # of Received pause frame pkt */
+	u32	uo;		/* RO # of unknown op code pkt */
+	u32	aln;		/* RO # of alignment error count */
+	u32	flr;		/* RO # of frame length out of range count */
+	u32	cde;		/* RO # of code error pkt */
+	u32	fcr;		/* RO # of carrier sense error pkt */
+	u32	ovr;		/* RO # of oversize pkt*/
+	u32	jbr;		/* RO # of jabber count */
+	u32	mtue;		/* RO # of MTU error pkt*/
+	u32	pok;		/* RO # of Received good pkt */
+	u32	uc;		/* RO # of unicast pkt */
+	u32	ppp;		/* RO # of PPP pkt */
+	u32	rcrc;		/* RO (0x470),# of CRC match pkt */
+};
+
+/* TSV, Transmit Status Vector */
+struct bcmgenet_tx_counters {
+	struct bcmgenet_pkt_counters pkt_cnt;
+	u32	pkts;		/* RO (0x4a8) Transmited pkt */
+	u32	mca;		/* RO # of xmited multicast pkt */
+	u32	bca;		/* RO # of xmited broadcast pkt */
+	u32	pf;		/* RO # of xmited pause frame count */
+	u32	cf;		/* RO # of xmited control frame count */
+	u32	fcs;		/* RO # of xmited FCS error count */
+	u32	ovr;		/* RO # of xmited oversize pkt */
+	u32	drf;		/* RO # of xmited deferral pkt */
+	u32	edf;		/* RO # of xmited Excessive deferral pkt*/
+	u32	scl;		/* RO # of xmited single collision pkt */
+	u32	mcl;		/* RO # of xmited multiple collision pkt*/
+	u32	lcl;		/* RO # of xmited late collision pkt */
+	u32	ecl;		/* RO # of xmited excessive collision pkt*/
+	u32	frg;		/* RO # of xmited fragments pkt*/
+	u32	ncl;		/* RO # of xmited total collision count */
+	u32	jbr;		/* RO # of xmited jabber count*/
+	u32	bytes;		/* RO # of xmited byte count */
+	u32	pok;		/* RO # of xmited good pkt */
+	u32	uc;		/* RO (0x0x4f0)# of xmited unitcast pkt */
+};
+
+struct bcmgenet_mib_counters {
+	struct bcmgenet_rx_counters rx;
+	struct bcmgenet_tx_counters tx;
+	u32	rx_runt_cnt;
+	u32	rx_runt_fcs;
+	u32	rx_runt_fcs_align;
+	u32	rx_runt_bytes;
+	u32	rbuf_ovflow_cnt;
+	u32	rbuf_err_cnt;
+	u32	mdf_err_cnt;
+};
+
+#define UMAC_HD_BKP_CTRL		0x004
+#define	 HD_FC_EN			(1 << 0)
+#define  HD_FC_BKOFF_OK			(1 << 1)
+#define  IPG_CONFIG_RX_SHIFT		2
+#define  IPG_CONFIG_RX_MASK		0x1F
+
+#define UMAC_CMD			0x008
+#define  CMD_TX_EN			(1 << 0)
+#define  CMD_RX_EN			(1 << 1)
+#define  UMAC_SPEED_10			0
+#define  UMAC_SPEED_100			1
+#define  UMAC_SPEED_1000		2
+#define  UMAC_SPEED_2500		3
+#define  CMD_SPEED_SHIFT		2
+#define  CMD_SPEED_MASK			3
+#define  CMD_PROMISC			(1 << 4)
+#define  CMD_PAD_EN			(1 << 5)
+#define  CMD_CRC_FWD			(1 << 6)
+#define  CMD_PAUSE_FWD			(1 << 7)
+#define  CMD_RX_PAUSE_IGNORE		(1 << 8)
+#define  CMD_TX_ADDR_INS		(1 << 9)
+#define  CMD_HD_EN			(1 << 10)
+#define  CMD_SW_RESET			(1 << 13)
+#define  CMD_LCL_LOOP_EN		(1 << 15)
+#define  CMD_AUTO_CONFIG		(1 << 22)
+#define  CMD_CNTL_FRM_EN		(1 << 23)
+#define  CMD_NO_LEN_CHK			(1 << 24)
+#define  CMD_RMT_LOOP_EN		(1 << 25)
+#define  CMD_PRBL_EN			(1 << 27)
+#define  CMD_TX_PAUSE_IGNORE		(1 << 28)
+#define  CMD_TX_RX_EN			(1 << 29)
+#define  CMD_RUNT_FILTER_DIS		(1 << 30)
+
+#define UMAC_MAC0			0x00C
+#define UMAC_MAC1			0x010
+#define UMAC_MAX_FRAME_LEN		0x014
+
+#define UMAC_TX_FLUSH			0x334
+
+#define UMAC_MIB_START			0x400
+
+#define UMAC_MDIO_CMD			0x614
+#define  MDIO_START_BUSY		(1 << 29)
+#define  MDIO_READ_FAIL			(1 << 28)
+#define  MDIO_RD			(2 << 26)
+#define  MDIO_WR			(1 << 26)
+#define  MDIO_PMD_SHIFT			21
+#define  MDIO_PMD_MASK			0x1F
+#define  MDIO_REG_SHIFT			16
+#define  MDIO_REG_MASK			0x1F
+
+#define UMAC_RBUF_OVFL_CNT		0x61C
+
+#define UMAC_MPD_CTRL			0x620
+#define  MPD_EN				(1 << 0)
+#define  MPD_PW_EN			(1 << 27)
+#define  MPD_MSEQ_LEN_SHIFT		16
+#define  MPD_MSEQ_LEN_MASK		0xFF
+
+#define UMAC_MPD_PW_MS			0x624
+#define UMAC_MPD_PW_LS			0x628
+#define UMAC_RBUF_ERR_CNT		0x634
+#define UMAC_MDF_ERR_CNT		0x638
+#define UMAC_MDF_CTRL			0x650
+#define UMAC_MDF_ADDR			0x654
+#define UMAC_MIB_CTRL			0x580
+#define  MIB_RESET_RX			(1 << 0)
+#define  MIB_RESET_RUNT			(1 << 1)
+#define  MIB_RESET_TX			(1 << 2)
+
+#define RBUF_CTRL			0x00
+#define  RBUF_64B_EN			(1 << 0)
+#define  RBUF_ALIGN_2B			(1 << 1)
+#define  RBUF_BAD_DIS			(1 << 2)
+
+#define RBUF_STATUS			0x0C
+#define  RBUF_STATUS_WOL		(1 << 0)
+#define  RBUF_STATUS_MPD_INTR_ACTIVE	(1 << 1)
+#define  RBUF_STATUS_ACPI_INTR_ACTIVE	(1 << 2)
+
+#define RBUF_CHK_CTRL			0x14
+#define  RBUF_RXCHK_EN			(1 << 0)
+#define  RBUF_SKIP_FCS			(1 << 4)
+
+#define RBUF_TBUF_SIZE_CTRL		0xb4
+
+#define RBUF_HFB_CTRL_V1		0x38
+#define  RBUF_HFB_FILTER_EN_SHIFT	16
+#define  RBUF_HFB_FILTER_EN_MASK	0xffff0000
+#define  RBUF_HFB_EN			(1 << 0)
+#define  RBUF_HFB_256B			(1 << 1)
+#define  RBUF_ACPI_EN			(1 << 2)
+
+#define RBUF_HFB_LEN_V1			0x3C
+#define  RBUF_FLTR_LEN_MASK		0xFF
+#define  RBUF_FLTR_LEN_SHIFT		8
+
+#define TBUF_CTRL			0x00
+#define TBUF_BP_MC			0x0C
+
+#define TBUF_CTRL_V1			0x80
+#define TBUF_BP_MC_V1			0xA0
+
+#define HFB_CTRL			0x00
+#define HFB_FLT_ENABLE_V3PLUS		0x04
+#define HFB_FLT_LEN_V2			0x04
+#define HFB_FLT_LEN_V3PLUS		0x1C
+
+/* uniMac intrl2 registers */
+#define INTRL2_CPU_STAT			0x00
+#define INTRL2_CPU_SET			0x04
+#define INTRL2_CPU_CLEAR		0x08
+#define INTRL2_CPU_MASK_STATUS		0x0C
+#define INTRL2_CPU_MASK_SET		0x10
+#define INTRL2_CPU_MASK_CLEAR		0x14
+
+/* INTRL2 instance 0 definitions */
+#define UMAC_IRQ_SCB			(1 << 0)
+#define UMAC_IRQ_EPHY			(1 << 1)
+#define UMAC_IRQ_PHY_DET_R		(1 << 2)
+#define UMAC_IRQ_PHY_DET_F		(1 << 3)
+#define UMAC_IRQ_LINK_UP		(1 << 4)
+#define UMAC_IRQ_LINK_DOWN		(1 << 5)
+#define UMAC_IRQ_UMAC			(1 << 6)
+#define UMAC_IRQ_UMAC_TSV		(1 << 7)
+#define UMAC_IRQ_TBUF_UNDERRUN		(1 << 8)
+#define UMAC_IRQ_RBUF_OVERFLOW		(1 << 9)
+#define UMAC_IRQ_HFB_SM			(1 << 10)
+#define UMAC_IRQ_HFB_MM			(1 << 11)
+#define UMAC_IRQ_MPD_R			(1 << 12)
+#define UMAC_IRQ_RXDMA_MBDONE		(1 << 13)
+#define UMAC_IRQ_RXDMA_PDONE		(1 << 14)
+#define UMAC_IRQ_RXDMA_BDONE		(1 << 15)
+#define UMAC_IRQ_TXDMA_MBDONE		(1 << 16)
+#define UMAC_IRQ_TXDMA_PDONE		(1 << 17)
+#define UMAC_IRQ_TXDMA_BDONE		(1 << 18)
+/* Only valid for GENETv3+ */
+#define UMAC_IRQ_MDIO_DONE		(1 << 23)
+#define UMAC_IRQ_MDIO_ERROR		(1 << 24)
+
+/* Register block offsets */
+#define GENET_SYS_OFF			0x0000
+#define GENET_GR_BRIDGE_OFF		0x0040
+#define GENET_EXT_OFF			0x0080
+#define GENET_INTRL2_0_OFF		0x0200
+#define GENET_INTRL2_1_OFF		0x0240
+#define GENET_RBUF_OFF			0x0300
+#define GENET_UMAC_OFF			0x0800
+
+/* SYS block offsets and register definitions */
+#define SYS_REV_CTRL			0x00
+#define SYS_PORT_CTRL			0x04
+#define  PORT_MODE_INT_EPHY		0
+#define  PORT_MODE_INT_GPHY		1
+#define  PORT_MODE_EXT_EPHY		2
+#define  PORT_MODE_EXT_GPHY		3
+#define  PORT_MODE_EXT_RVMII_25		(4 | BIT(4))
+#define  PORT_MODE_EXT_RVMII_50		4
+#define  LED_ACT_SOURCE_MAC		(1 << 9)
+
+#define SYS_RBUF_FLUSH_CTRL		0x08
+#define SYS_TBUF_FLUSH_CTRL		0x0C
+#define RBUF_FLUSH_CTRL_V1		0x04
+
+/* Ext block register offsets and definitions */
+#define EXT_EXT_PWR_MGMT		0x00
+#define  EXT_PWR_DOWN_BIAS		(1 << 0)
+#define  EXT_PWR_DOWN_DLL		(1 << 1)
+#define  EXT_PWR_DOWN_PHY		(1 << 2)
+#define  EXT_PWR_DN_EN_LD		(1 << 3)
+#define  EXT_ENERGY_DET			(1 << 4)
+#define  EXT_IDDQ_FROM_PHY		(1 << 5)
+#define  EXT_PHY_RESET			(1 << 8)
+#define  EXT_ENERGY_DET_MASK		(1 << 12)
+
+#define EXT_RGMII_OOB_CTRL		0x0C
+#define  RGMII_MODE_EN			(1 << 0)
+#define  RGMII_LINK			(1 << 4)
+#define  OOB_DISABLE			(1 << 5)
+#define  ID_MODE_DIS			(1 << 16)
+
+#define EXT_GPHY_CTRL			0x1C
+#define  EXT_CFG_IDDQ_BIAS		(1 << 0)
+#define  EXT_CFG_PWR_DOWN		(1 << 1)
+#define  EXT_GPHY_RESET			(1 << 5)
+
+/* DMA rings size */
+#define DMA_RING_SIZE			(0x40)
+#define DMA_RINGS_SIZE			(DMA_RING_SIZE * (DESC_INDEX + 1))
+
+/* DMA registers common definitions */
+#define DMA_RW_POINTER_MASK		0x1FF
+#define DMA_P_INDEX_DISCARD_CNT_MASK	0xFFFF
+#define DMA_P_INDEX_DISCARD_CNT_SHIFT	16
+#define DMA_BUFFER_DONE_CNT_MASK	0xFFFF
+#define DMA_BUFFER_DONE_CNT_SHIFT	16
+#define DMA_P_INDEX_MASK		0xFFFF
+#define DMA_C_INDEX_MASK		0xFFFF
+
+/* DMA ring size register */
+#define DMA_RING_SIZE_MASK		0xFFFF
+#define DMA_RING_SIZE_SHIFT		16
+#define DMA_RING_BUFFER_SIZE_MASK	0xFFFF
+
+/* DMA interrupt threshold register */
+#define DMA_INTR_THRESHOLD_MASK		0x00FF
+
+/* DMA XON/XOFF register */
+#define DMA_XON_THREHOLD_MASK		0xFFFF
+#define DMA_XOFF_THRESHOLD_MASK		0xFFFF
+#define DMA_XOFF_THRESHOLD_SHIFT	16
+
+/* DMA flow period register */
+#define DMA_FLOW_PERIOD_MASK		0xFFFF
+#define DMA_MAX_PKT_SIZE_MASK		0xFFFF
+#define DMA_MAX_PKT_SIZE_SHIFT		16
+
+
+/* DMA control register */
+#define DMA_EN				(1 << 0)
+#define DMA_RING_BUF_EN_SHIFT		0x01
+#define DMA_RING_BUF_EN_MASK		0xFFFF
+#define DMA_TSB_SWAP_EN			(1 << 20)
+
+/* DMA status register */
+#define DMA_DISABLED			(1 << 0)
+#define DMA_DESC_RAM_INIT_BUSY		(1 << 1)
+
+/* DMA SCB burst size register */
+#define DMA_SCB_BURST_SIZE_MASK		0x1F
+
+/* DMA activity vector register */
+#define DMA_ACTIVITY_VECTOR_MASK	0x1FFFF
+
+/* DMA backpressure mask register */
+#define DMA_BACKPRESSURE_MASK		0x1FFFF
+#define DMA_PFC_ENABLE			(1 << 31)
+
+/* DMA backpressure status register */
+#define DMA_BACKPRESSURE_STATUS_MASK	0x1FFFF
+
+/* DMA override register */
+#define DMA_LITTLE_ENDIAN_MODE		(1 << 0)
+#define DMA_REGISTER_MODE		(1 << 1)
+
+/* DMA timeout register */
+#define DMA_TIMEOUT_MASK		0xFFFF
+#define DMA_TIMEOUT_VAL			5000	/* micro seconds */
+
+/* TDMA rate limiting control register */
+#define DMA_RATE_LIMIT_EN_MASK		0xFFFF
+
+/* TDMA arbitration control register */
+#define DMA_ARBITER_MODE_MASK		0x03
+#define DMA_RING_BUF_PRIORITY_MASK	0x1F
+#define DMA_RING_BUF_PRIORITY_SHIFT	5
+#define DMA_RATE_ADJ_MASK		0xFF
+
+/* Tx/Rx Dma Descriptor common bits*/
+#define DMA_BUFLENGTH_MASK		0x0fff
+#define DMA_BUFLENGTH_SHIFT		16
+#define DMA_OWN				0x8000
+#define DMA_EOP				0x4000
+#define DMA_SOP				0x2000
+#define DMA_WRAP			0x1000
+/* Tx specific Dma descriptor bits */
+#define DMA_TX_UNDERRUN			0x0200
+#define DMA_TX_APPEND_CRC		0x0040
+#define DMA_TX_OW_CRC			0x0020
+#define DMA_TX_DO_CSUM			0x0010
+#define DMA_TX_QTAG_SHIFT		7
+
+/* Rx Specific Dma descriptor bits */
+#define DMA_RX_CHK_V3PLUS		0x8000
+#define DMA_RX_CHK_V12			0x1000
+#define DMA_RX_BRDCAST			0x0040
+#define DMA_RX_MULT			0x0020
+#define DMA_RX_LG			0x0010
+#define DMA_RX_NO			0x0008
+#define DMA_RX_RXER			0x0004
+#define DMA_RX_CRC_ERROR		0x0002
+#define DMA_RX_OV			0x0001
+#define DMA_RX_FI_MASK			0x001F
+#define DMA_RX_FI_SHIFT			0x0007
+#define DMA_DESC_ALLOC_MASK		0x00FF
+
+#define DMA_ARBITER_RR			0x00
+#define DMA_ARBITER_WRR			0x01
+#define DMA_ARBITER_SP			0x02
+
+struct enet_cb {
+	struct sk_buff      *skb;
+	void __iomem *bd_addr;
+	DEFINE_DMA_UNMAP_ADDR(dma_addr);
+	DEFINE_DMA_UNMAP_LEN(dma_len);
+};
+
+/* power management mode */
+enum bcmgenet_power_mode {
+	GENET_POWER_CABLE_SENSE = 0,
+	GENET_POWER_PASSIVE,
+};
+
+struct bcmgenet_priv;
+
+/* We support both runtime GENET detection and compile-time
+ * to optimize code-paths for a given hardware
+ */
+enum bcmgenet_version {
+	GENET_V1 = 1,
+	GENET_V2,
+	GENET_V3,
+	GENET_V4
+};
+
+#define GENET_IS_V1(p)	((p)->version == GENET_V1)
+#define GENET_IS_V2(p)	((p)->version == GENET_V2)
+#define GENET_IS_V3(p)	((p)->version == GENET_V3)
+#define GENET_IS_V4(p)	((p)->version == GENET_V4)
+
+/* Hardware flags */
+#define GENET_HAS_40BITS	(1 << 0)
+#define GENET_HAS_EXT		(1 << 1)
+#define GENET_HAS_MDIO_INTR	(1 << 2)
+
+/* BCMGENET hardware parameters, keep this structure nicely aligned
+ * since it is going to be used in hot paths
+ */
+struct bcmgenet_hw_params {
+	u8		tx_queues;
+	u8		rx_queues;
+	u8		bds_cnt;
+	u8		bp_in_en_shift;
+	u32		bp_in_mask;
+	u8		hfb_filter_cnt;
+	u8		qtag_mask;
+	u16		tbuf_offset;
+	u32		hfb_offset;
+	u32		hfb_reg_offset;
+	u32		rdma_offset;
+	u32		tdma_offset;
+	u32		words_per_bd;
+	u32		flags;
+};
+
+struct bcmgenet_tx_ring {
+	spinlock_t	lock;		/* ring lock */
+	unsigned int	index;		/* ring index */
+	unsigned int	queue;		/* queue index */
+	struct enet_cb	*cbs;		/* tx ring buffer control block*/
+	unsigned int	size;		/* size of each tx ring */
+	unsigned int	c_index;	/* last consumer index of each ring*/
+	unsigned int	free_bds;	/* # of free bds for each ring */
+	unsigned int	write_ptr;	/* Tx ring write pointer SW copy */
+	unsigned int	prod_index;	/* Tx ring producer index SW copy */
+	unsigned int	cb_ptr;		/* Tx ring initial CB ptr */
+	unsigned int	end_ptr;	/* Tx ring end CB ptr */
+	void (*int_enable)(struct bcmgenet_priv *priv,
+				struct bcmgenet_tx_ring *);
+	void (*int_disable)(struct bcmgenet_priv *priv,
+				struct bcmgenet_tx_ring *);
+};
+
+/* device context */
+struct bcmgenet_priv {
+	void __iomem *base;
+	enum bcmgenet_version version;
+	struct net_device *dev;
+	spinlock_t lock;
+	spinlock_t bh_lock;
+	u32 int0_mask;
+	u32 int1_mask;
+
+	/* NAPI for descriptor based rx */
+	struct napi_struct napi ____cacheline_aligned;
+
+	/* transmit variables */
+	void __iomem *tx_bds;
+	struct enet_cb *tx_cbs;
+	unsigned int num_tx_bds;
+
+	struct bcmgenet_tx_ring tx_rings[DESC_INDEX + 1];
+
+	/* receive variables */
+	void __iomem *rx_bds;
+	void __iomem *rx_bd_assign_ptr;
+	int rx_bd_assign_index;
+	struct enet_cb *rx_cbs;
+	unsigned int num_rx_bds;
+	unsigned int rx_buf_len;
+	unsigned int rx_read_ptr;
+	unsigned int rx_c_index;
+
+	/* other misc variables */
+	struct bcmgenet_hw_params *hw_params;
+
+	/* MDIO bus variables */
+	wait_queue_head_t wq;
+	struct phy_device *phydev;
+	struct device_node *phy_dn;
+	struct mii_bus *mii_bus;
+
+	/* PHY device variables */
+	int old_duplex;
+	int old_link;
+	int old_pause;
+	phy_interface_t phy_interface;
+	int phy_addr;
+	int ext_phy;
+
+	/* Interrupt variables */
+	struct work_struct bcmgenet_irq_work;
+	int irq0;
+	int irq1;
+	unsigned int irq0_stat;
+	unsigned int irq1_stat;
+
+	/* HW descriptors/checksum variables */
+	bool desc_64b_en;
+	bool desc_rxchk_en;
+	bool crc_fwd_en;
+
+	unsigned int dma_rx_chk_bit;
+
+	u32 msg_enable;
+
+	struct clk *clk;
+	struct platform_device *pdev;
+
+	/* WOL */
+	unsigned long wol_enabled;
+	struct clk *clk_wol;
+	u32 wolopts;
+
+	struct bcmgenet_mib_counters mib;
+};
+
+#define GENET_IO_MACRO(name, offset)					\
+static inline u32 bcmgenet_##name##_readl(struct bcmgenet_priv *priv,	\
+					u32 off)			\
+{									\
+	return __raw_readl(priv->base + offset + off);			\
+}									\
+static inline void bcmgenet_##name##_writel(struct bcmgenet_priv *priv,	\
+					u32 val, u32 off)		\
+{									\
+	__raw_writel(val, priv->base + offset + off);			\
+}
+
+GENET_IO_MACRO(ext, GENET_EXT_OFF);
+GENET_IO_MACRO(umac, GENET_UMAC_OFF);
+GENET_IO_MACRO(sys, GENET_SYS_OFF);
+
+/* interrupt l2 registers accessors */
+GENET_IO_MACRO(intrl2_0, GENET_INTRL2_0_OFF);
+GENET_IO_MACRO(intrl2_1, GENET_INTRL2_1_OFF);
+
+/* HFB register accessors  */
+GENET_IO_MACRO(hfb, priv->hw_params->hfb_offset);
+
+/* GENET v2+ HFB control and filter len helpers */
+GENET_IO_MACRO(hfb_reg, priv->hw_params->hfb_reg_offset);
+
+/* RBUF register accessors */
+GENET_IO_MACRO(rbuf, GENET_RBUF_OFF);
+
+/* MDIO routines */
+int bcmgenet_mii_init(struct net_device *dev);
+int bcmgenet_mii_config(struct net_device *dev);
+void bcmgenet_mii_exit(struct net_device *dev);
+void bcmgenet_mii_reset(struct net_device *dev);
+
+#endif /* __BCMGENET_H__ */
-- 
cgit v1.2.2


From 1c1008c793fa46703a2fee469f4235e1c7984333 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Thu, 13 Feb 2014 16:08:47 -0800
Subject: net: bcmgenet: add main driver file

This patch adds the BCMGENET main driver file which supports the
following:

- GENET hardware from V1 to V4
- support for reading the UniMAC MIB counters statistics
- support for the 5 transmit queues
- support for RX/TX checksum offload and SG

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/genet/bcmgenet.c | 2595 ++++++++++++++++++++++++
 1 file changed, 2595 insertions(+)
 create mode 100644 drivers/net/ethernet/broadcom/genet/bcmgenet.c

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
new file mode 100644
index 000000000000..0ebc29769510
--- /dev/null
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -0,0 +1,2595 @@
+/*
+ * Broadcom GENET (Gigabit Ethernet) controller driver
+ *
+ * Copyright (c) 2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#define pr_fmt(fmt)				"bcmgenet: " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/interrupt.h>
+#include <linux/string.h>
+#include <linux/if_ether.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/pm.h>
+#include <linux/clk.h>
+#include <linux/version.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_net.h>
+#include <linux/of_platform.h>
+#include <net/arp.h>
+
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/netdevice.h>
+#include <linux/inetdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/ipv6.h>
+#include <linux/phy.h>
+
+#include <asm/unaligned.h>
+
+#include "bcmgenet.h"
+
+/* Maximum number of hardware queues, downsized if needed */
+#define GENET_MAX_MQ_CNT	4
+
+/* Default highest priority queue for multi queue support */
+#define GENET_Q0_PRIORITY	0
+
+#define GENET_DEFAULT_BD_CNT	\
+	(TOTAL_DESC - priv->hw_params->tx_queues * priv->hw_params->bds_cnt)
+
+#define RX_BUF_LENGTH		2048
+#define SKB_ALIGNMENT		32
+
+/* Tx/Rx DMA register offset, skip 256 descriptors */
+#define WORDS_PER_BD(p)		(p->hw_params->words_per_bd)
+#define DMA_DESC_SIZE		(WORDS_PER_BD(priv) * sizeof(u32))
+
+#define GENET_TDMA_REG_OFF	(priv->hw_params->tdma_offset + \
+				TOTAL_DESC * DMA_DESC_SIZE)
+
+#define GENET_RDMA_REG_OFF	(priv->hw_params->rdma_offset + \
+				TOTAL_DESC * DMA_DESC_SIZE)
+
+static inline void dmadesc_set_length_status(struct bcmgenet_priv *priv,
+						void __iomem *d, u32 value)
+{
+	__raw_writel(value, d + DMA_DESC_LENGTH_STATUS);
+}
+
+static inline u32 dmadesc_get_length_status(struct bcmgenet_priv *priv,
+						void __iomem *d)
+{
+	return __raw_readl(d + DMA_DESC_LENGTH_STATUS);
+}
+
+static inline void dmadesc_set_addr(struct bcmgenet_priv *priv,
+				    void __iomem *d,
+				    dma_addr_t addr)
+{
+	__raw_writel(lower_32_bits(addr), d + DMA_DESC_ADDRESS_LO);
+
+	/* Register writes to GISB bus can take couple hundred nanoseconds
+	 * and are done for each packet, save these expensive writes unless
+	 * the platform is explicitely configured for 64-bits/LPAE.
+	 */
+#ifdef CONFIG_PHYS_ADDR_T_64BIT
+	if (priv->hw_params->flags & GENET_HAS_40BITS)
+		__raw_writel(upper_32_bits(addr), d + DMA_DESC_ADDRESS_HI);
+#endif
+}
+
+/* Combined address + length/status setter */
+static inline void dmadesc_set(struct bcmgenet_priv *priv,
+				void __iomem *d, dma_addr_t addr, u32 val)
+{
+	dmadesc_set_length_status(priv, d, val);
+	dmadesc_set_addr(priv, d, addr);
+}
+
+static inline dma_addr_t dmadesc_get_addr(struct bcmgenet_priv *priv,
+					  void __iomem *d)
+{
+	dma_addr_t addr;
+
+	addr = __raw_readl(d + DMA_DESC_ADDRESS_LO);
+
+	/* Register writes to GISB bus can take couple hundred nanoseconds
+	 * and are done for each packet, save these expensive writes unless
+	 * the platform is explicitely configured for 64-bits/LPAE.
+	 */
+#ifdef CONFIG_PHYS_ADDR_T_64BIT
+	if (priv->hw_params->flags & GENET_HAS_40BITS)
+		addr |= (u64)__raw_readl(d + DMA_DESC_ADDRESS_HI) << 32;
+#endif
+	return addr;
+}
+
+#define GENET_VER_FMT	"%1d.%1d EPHY: 0x%04x"
+
+#define GENET_MSG_DEFAULT	(NETIF_MSG_DRV | NETIF_MSG_PROBE | \
+				NETIF_MSG_LINK)
+
+static inline u32 bcmgenet_rbuf_ctrl_get(struct bcmgenet_priv *priv)
+{
+	if (GENET_IS_V1(priv))
+		return bcmgenet_rbuf_readl(priv, RBUF_FLUSH_CTRL_V1);
+	else
+		return bcmgenet_sys_readl(priv, SYS_RBUF_FLUSH_CTRL);
+}
+
+static inline void bcmgenet_rbuf_ctrl_set(struct bcmgenet_priv *priv, u32 val)
+{
+	if (GENET_IS_V1(priv))
+		bcmgenet_rbuf_writel(priv, val, RBUF_FLUSH_CTRL_V1);
+	else
+		bcmgenet_sys_writel(priv, val, SYS_RBUF_FLUSH_CTRL);
+}
+
+/* These macros are defined to deal with register map change
+ * between GENET1.1 and GENET2. Only those currently being used
+ * by driver are defined.
+ */
+static inline u32 bcmgenet_tbuf_ctrl_get(struct bcmgenet_priv *priv)
+{
+	if (GENET_IS_V1(priv))
+		return bcmgenet_rbuf_readl(priv, TBUF_CTRL_V1);
+	else
+		return __raw_readl(priv->base +
+				priv->hw_params->tbuf_offset + TBUF_CTRL);
+}
+
+static inline void bcmgenet_tbuf_ctrl_set(struct bcmgenet_priv *priv, u32 val)
+{
+	if (GENET_IS_V1(priv))
+		bcmgenet_rbuf_writel(priv, val, TBUF_CTRL_V1);
+	else
+		__raw_writel(val, priv->base +
+				priv->hw_params->tbuf_offset + TBUF_CTRL);
+}
+
+static inline u32 bcmgenet_bp_mc_get(struct bcmgenet_priv *priv)
+{
+	if (GENET_IS_V1(priv))
+		return bcmgenet_rbuf_readl(priv, TBUF_BP_MC_V1);
+	else
+		return __raw_readl(priv->base +
+				priv->hw_params->tbuf_offset + TBUF_BP_MC);
+}
+
+static inline void bcmgenet_bp_mc_set(struct bcmgenet_priv *priv, u32 val)
+{
+	if (GENET_IS_V1(priv))
+		bcmgenet_rbuf_writel(priv, val, TBUF_BP_MC_V1);
+	else
+		__raw_writel(val, priv->base +
+				priv->hw_params->tbuf_offset + TBUF_BP_MC);
+}
+
+/* RX/TX DMA register accessors */
+enum dma_reg {
+	DMA_RING_CFG = 0,
+	DMA_CTRL,
+	DMA_STATUS,
+	DMA_SCB_BURST_SIZE,
+	DMA_ARB_CTRL,
+	DMA_PRIORITY,
+	DMA_RING_PRIORITY,
+};
+
+static const u8 bcmgenet_dma_regs_v3plus[] = {
+	[DMA_RING_CFG]		= 0x00,
+	[DMA_CTRL]		= 0x04,
+	[DMA_STATUS]		= 0x08,
+	[DMA_SCB_BURST_SIZE]	= 0x0C,
+	[DMA_ARB_CTRL]		= 0x2C,
+	[DMA_PRIORITY]		= 0x30,
+	[DMA_RING_PRIORITY]	= 0x38,
+};
+
+static const u8 bcmgenet_dma_regs_v2[] = {
+	[DMA_RING_CFG]		= 0x00,
+	[DMA_CTRL]		= 0x04,
+	[DMA_STATUS]		= 0x08,
+	[DMA_SCB_BURST_SIZE]	= 0x0C,
+	[DMA_ARB_CTRL]		= 0x30,
+	[DMA_PRIORITY]		= 0x34,
+	[DMA_RING_PRIORITY]	= 0x3C,
+};
+
+static const u8 bcmgenet_dma_regs_v1[] = {
+	[DMA_CTRL]		= 0x00,
+	[DMA_STATUS]		= 0x04,
+	[DMA_SCB_BURST_SIZE]	= 0x0C,
+	[DMA_ARB_CTRL]		= 0x30,
+	[DMA_PRIORITY]		= 0x34,
+	[DMA_RING_PRIORITY]	= 0x3C,
+};
+
+/* Set at runtime once bcmgenet version is known */
+static const u8 *bcmgenet_dma_regs;
+
+static inline struct bcmgenet_priv *dev_to_priv(struct device *dev)
+{
+	return netdev_priv(dev_get_drvdata(dev));
+}
+
+static inline u32 bcmgenet_tdma_readl(struct bcmgenet_priv *priv,
+					enum dma_reg r)
+{
+	return __raw_readl(priv->base + GENET_TDMA_REG_OFF +
+			DMA_RINGS_SIZE + bcmgenet_dma_regs[r]);
+}
+
+static inline void bcmgenet_tdma_writel(struct bcmgenet_priv *priv,
+					u32 val, enum dma_reg r)
+{
+	__raw_writel(val, priv->base + GENET_TDMA_REG_OFF +
+			DMA_RINGS_SIZE + bcmgenet_dma_regs[r]);
+}
+
+static inline u32 bcmgenet_rdma_readl(struct bcmgenet_priv *priv,
+					enum dma_reg r)
+{
+	return __raw_readl(priv->base + GENET_RDMA_REG_OFF +
+			DMA_RINGS_SIZE + bcmgenet_dma_regs[r]);
+}
+
+static inline void bcmgenet_rdma_writel(struct bcmgenet_priv *priv,
+					u32 val, enum dma_reg r)
+{
+	__raw_writel(val, priv->base + GENET_RDMA_REG_OFF +
+			DMA_RINGS_SIZE + bcmgenet_dma_regs[r]);
+}
+
+/* RDMA/TDMA ring registers and accessors
+ * we merge the common fields and just prefix with T/D the registers
+ * having different meaning depending on the direction
+ */
+enum dma_ring_reg {
+	TDMA_READ_PTR = 0,
+	RDMA_WRITE_PTR = TDMA_READ_PTR,
+	TDMA_READ_PTR_HI,
+	RDMA_WRITE_PTR_HI = TDMA_READ_PTR_HI,
+	TDMA_CONS_INDEX,
+	RDMA_PROD_INDEX = TDMA_CONS_INDEX,
+	TDMA_PROD_INDEX,
+	RDMA_CONS_INDEX = TDMA_PROD_INDEX,
+	DMA_RING_BUF_SIZE,
+	DMA_START_ADDR,
+	DMA_START_ADDR_HI,
+	DMA_END_ADDR,
+	DMA_END_ADDR_HI,
+	DMA_MBUF_DONE_THRESH,
+	TDMA_FLOW_PERIOD,
+	RDMA_XON_XOFF_THRESH = TDMA_FLOW_PERIOD,
+	TDMA_WRITE_PTR,
+	RDMA_READ_PTR = TDMA_WRITE_PTR,
+	TDMA_WRITE_PTR_HI,
+	RDMA_READ_PTR_HI = TDMA_WRITE_PTR_HI
+};
+
+/* GENET v4 supports 40-bits pointer addressing
+ * for obvious reasons the LO and HI word parts
+ * are contiguous, but this offsets the other
+ * registers.
+ */
+static const u8 genet_dma_ring_regs_v4[] = {
+	[TDMA_READ_PTR]			= 0x00,
+	[TDMA_READ_PTR_HI]		= 0x04,
+	[TDMA_CONS_INDEX]		= 0x08,
+	[TDMA_PROD_INDEX]		= 0x0C,
+	[DMA_RING_BUF_SIZE]		= 0x10,
+	[DMA_START_ADDR]		= 0x14,
+	[DMA_START_ADDR_HI]		= 0x18,
+	[DMA_END_ADDR]			= 0x1C,
+	[DMA_END_ADDR_HI]		= 0x20,
+	[DMA_MBUF_DONE_THRESH]		= 0x24,
+	[TDMA_FLOW_PERIOD]		= 0x28,
+	[TDMA_WRITE_PTR]		= 0x2C,
+	[TDMA_WRITE_PTR_HI]		= 0x30,
+};
+
+static const u8 genet_dma_ring_regs_v123[] = {
+	[TDMA_READ_PTR]			= 0x00,
+	[TDMA_CONS_INDEX]		= 0x04,
+	[TDMA_PROD_INDEX]		= 0x08,
+	[DMA_RING_BUF_SIZE]		= 0x0C,
+	[DMA_START_ADDR]		= 0x10,
+	[DMA_END_ADDR]			= 0x14,
+	[DMA_MBUF_DONE_THRESH]		= 0x18,
+	[TDMA_FLOW_PERIOD]		= 0x1C,
+	[TDMA_WRITE_PTR]		= 0x20,
+};
+
+/* Set at runtime once GENET version is known */
+static const u8 *genet_dma_ring_regs;
+
+static inline u32 bcmgenet_tdma_ring_readl(struct bcmgenet_priv *priv,
+						unsigned int ring,
+						enum dma_ring_reg r)
+{
+	return __raw_readl(priv->base + GENET_TDMA_REG_OFF +
+			(DMA_RING_SIZE * ring) +
+			genet_dma_ring_regs[r]);
+}
+
+static inline void bcmgenet_tdma_ring_writel(struct bcmgenet_priv *priv,
+						unsigned int ring,
+						u32 val,
+						enum dma_ring_reg r)
+{
+	__raw_writel(val, priv->base + GENET_TDMA_REG_OFF +
+			(DMA_RING_SIZE * ring) +
+			genet_dma_ring_regs[r]);
+}
+
+static inline u32 bcmgenet_rdma_ring_readl(struct bcmgenet_priv *priv,
+						unsigned int ring,
+						enum dma_ring_reg r)
+{
+	return __raw_readl(priv->base + GENET_RDMA_REG_OFF +
+			(DMA_RING_SIZE * ring) +
+			genet_dma_ring_regs[r]);
+}
+
+static inline void bcmgenet_rdma_ring_writel(struct bcmgenet_priv *priv,
+						unsigned int ring,
+						u32 val,
+						enum dma_ring_reg r)
+{
+	__raw_writel(val, priv->base + GENET_RDMA_REG_OFF +
+			(DMA_RING_SIZE * ring) +
+			genet_dma_ring_regs[r]);
+}
+
+static int bcmgenet_get_settings(struct net_device *dev,
+		struct ethtool_cmd *cmd)
+{
+	struct bcmgenet_priv *priv = netdev_priv(dev);
+
+	if (!netif_running(dev))
+		return -EINVAL;
+
+	if (!priv->phydev)
+		return -ENODEV;
+
+	return phy_ethtool_gset(priv->phydev, cmd);
+}
+
+static int bcmgenet_set_settings(struct net_device *dev,
+		struct ethtool_cmd *cmd)
+{
+	struct bcmgenet_priv *priv = netdev_priv(dev);
+
+	if (!netif_running(dev))
+		return -EINVAL;
+
+	if (!priv->phydev)
+		return -ENODEV;
+
+	return phy_ethtool_sset(priv->phydev, cmd);
+}
+
+static int bcmgenet_set_rx_csum(struct net_device *dev,
+				netdev_features_t wanted)
+{
+	struct bcmgenet_priv *priv = netdev_priv(dev);
+	u32 rbuf_chk_ctrl;
+	bool rx_csum_en;
+
+	rx_csum_en = !!(wanted & NETIF_F_RXCSUM);
+
+	rbuf_chk_ctrl = bcmgenet_rbuf_readl(priv, RBUF_CHK_CTRL);
+
+	/* enable rx checksumming */
+	if (rx_csum_en)
+		rbuf_chk_ctrl |= RBUF_RXCHK_EN;
+	else
+		rbuf_chk_ctrl &= ~RBUF_RXCHK_EN;
+	priv->desc_rxchk_en = rx_csum_en;
+	bcmgenet_rbuf_writel(priv, rbuf_chk_ctrl, RBUF_CHK_CTRL);
+
+	return 0;
+}
+
+static int bcmgenet_set_tx_csum(struct net_device *dev,
+				netdev_features_t wanted)
+{
+	struct bcmgenet_priv *priv = netdev_priv(dev);
+	bool desc_64b_en;
+	u32 tbuf_ctrl, rbuf_ctrl;
+
+	tbuf_ctrl = bcmgenet_tbuf_ctrl_get(priv);
+	rbuf_ctrl = bcmgenet_rbuf_readl(priv, RBUF_CTRL);
+
+	desc_64b_en = !!(wanted & (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM));
+
+	/* enable 64 bytes descriptor in both directions (RBUF and TBUF) */
+	if (desc_64b_en) {
+		tbuf_ctrl |= RBUF_64B_EN;
+		rbuf_ctrl |= RBUF_64B_EN;
+	} else {
+		tbuf_ctrl &= ~RBUF_64B_EN;
+		rbuf_ctrl &= ~RBUF_64B_EN;
+	}
+	priv->desc_64b_en = desc_64b_en;
+
+	bcmgenet_tbuf_ctrl_set(priv, tbuf_ctrl);
+	bcmgenet_rbuf_writel(priv, rbuf_ctrl, RBUF_CTRL);
+
+	return 0;
+}
+
+static int bcmgenet_set_features(struct net_device *dev,
+		netdev_features_t features)
+{
+	netdev_features_t changed = features ^ dev->features;
+	netdev_features_t wanted = dev->wanted_features;
+	int ret = 0;
+
+	if (changed & (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM))
+		ret = bcmgenet_set_tx_csum(dev, wanted);
+	if (changed & (NETIF_F_RXCSUM))
+		ret = bcmgenet_set_rx_csum(dev, wanted);
+
+	return ret;
+}
+
+static u32 bcmgenet_get_msglevel(struct net_device *dev)
+{
+	struct bcmgenet_priv *priv = netdev_priv(dev);
+
+	return priv->msg_enable;
+}
+
+static void bcmgenet_set_msglevel(struct net_device *dev, u32 level)
+{
+	struct bcmgenet_priv *priv = netdev_priv(dev);
+
+	priv->msg_enable = level;
+}
+
+/* standard ethtool support functions. */
+enum bcmgenet_stat_type {
+	BCMGENET_STAT_NETDEV = -1,
+	BCMGENET_STAT_MIB_RX,
+	BCMGENET_STAT_MIB_TX,
+	BCMGENET_STAT_RUNT,
+	BCMGENET_STAT_MISC,
+};
+
+struct bcmgenet_stats {
+	char stat_string[ETH_GSTRING_LEN];
+	int stat_sizeof;
+	int stat_offset;
+	enum bcmgenet_stat_type type;
+	/* reg offset from UMAC base for misc counters */
+	u16 reg_offset;
+};
+
+#define STAT_NETDEV(m) { \
+	.stat_string = __stringify(m), \
+	.stat_sizeof = sizeof(((struct net_device_stats *)0)->m), \
+	.stat_offset = offsetof(struct net_device_stats, m), \
+	.type = BCMGENET_STAT_NETDEV, \
+}
+
+#define STAT_GENET_MIB(str, m, _type) { \
+	.stat_string = str, \
+	.stat_sizeof = sizeof(((struct bcmgenet_priv *)0)->m), \
+	.stat_offset = offsetof(struct bcmgenet_priv, m), \
+	.type = _type, \
+}
+
+#define STAT_GENET_MIB_RX(str, m) STAT_GENET_MIB(str, m, BCMGENET_STAT_MIB_RX)
+#define STAT_GENET_MIB_TX(str, m) STAT_GENET_MIB(str, m, BCMGENET_STAT_MIB_TX)
+#define STAT_GENET_RUNT(str, m) STAT_GENET_MIB(str, m, BCMGENET_STAT_RUNT)
+
+#define STAT_GENET_MISC(str, m, offset) { \
+	.stat_string = str, \
+	.stat_sizeof = sizeof(((struct bcmgenet_priv *)0)->m), \
+	.stat_offset = offsetof(struct bcmgenet_priv, m), \
+	.type = BCMGENET_STAT_MISC, \
+	.reg_offset = offset, \
+}
+
+
+/* There is a 0xC gap between the end of RX and beginning of TX stats and then
+ * between the end of TX stats and the beginning of the RX RUNT
+ */
+#define BCMGENET_STAT_OFFSET	0xc
+
+/* Hardware counters must be kept in sync because the order/offset
+ * is important here (order in structure declaration = order in hardware)
+ */
+static const struct bcmgenet_stats bcmgenet_gstrings_stats[] = {
+	/* general stats */
+	STAT_NETDEV(rx_packets),
+	STAT_NETDEV(tx_packets),
+	STAT_NETDEV(rx_bytes),
+	STAT_NETDEV(tx_bytes),
+	STAT_NETDEV(rx_errors),
+	STAT_NETDEV(tx_errors),
+	STAT_NETDEV(rx_dropped),
+	STAT_NETDEV(tx_dropped),
+	STAT_NETDEV(multicast),
+	/* UniMAC RSV counters */
+	STAT_GENET_MIB_RX("rx_64_octets", mib.rx.pkt_cnt.cnt_64),
+	STAT_GENET_MIB_RX("rx_65_127_oct", mib.rx.pkt_cnt.cnt_127),
+	STAT_GENET_MIB_RX("rx_128_255_oct", mib.rx.pkt_cnt.cnt_255),
+	STAT_GENET_MIB_RX("rx_256_511_oct", mib.rx.pkt_cnt.cnt_511),
+	STAT_GENET_MIB_RX("rx_512_1023_oct", mib.rx.pkt_cnt.cnt_1023),
+	STAT_GENET_MIB_RX("rx_1024_1518_oct", mib.rx.pkt_cnt.cnt_1518),
+	STAT_GENET_MIB_RX("rx_vlan_1519_1522_oct", mib.rx.pkt_cnt.cnt_mgv),
+	STAT_GENET_MIB_RX("rx_1522_2047_oct", mib.rx.pkt_cnt.cnt_2047),
+	STAT_GENET_MIB_RX("rx_2048_4095_oct", mib.rx.pkt_cnt.cnt_4095),
+	STAT_GENET_MIB_RX("rx_4096_9216_oct", mib.rx.pkt_cnt.cnt_9216),
+	STAT_GENET_MIB_RX("rx_pkts", mib.rx.pkt),
+	STAT_GENET_MIB_RX("rx_bytes", mib.rx.bytes),
+	STAT_GENET_MIB_RX("rx_multicast", mib.rx.mca),
+	STAT_GENET_MIB_RX("rx_broadcast", mib.rx.bca),
+	STAT_GENET_MIB_RX("rx_fcs", mib.rx.fcs),
+	STAT_GENET_MIB_RX("rx_control", mib.rx.cf),
+	STAT_GENET_MIB_RX("rx_pause", mib.rx.pf),
+	STAT_GENET_MIB_RX("rx_unknown", mib.rx.uo),
+	STAT_GENET_MIB_RX("rx_align", mib.rx.aln),
+	STAT_GENET_MIB_RX("rx_outrange", mib.rx.flr),
+	STAT_GENET_MIB_RX("rx_code", mib.rx.cde),
+	STAT_GENET_MIB_RX("rx_carrier", mib.rx.fcr),
+	STAT_GENET_MIB_RX("rx_oversize", mib.rx.ovr),
+	STAT_GENET_MIB_RX("rx_jabber", mib.rx.jbr),
+	STAT_GENET_MIB_RX("rx_mtu_err", mib.rx.mtue),
+	STAT_GENET_MIB_RX("rx_good_pkts", mib.rx.pok),
+	STAT_GENET_MIB_RX("rx_unicast", mib.rx.uc),
+	STAT_GENET_MIB_RX("rx_ppp", mib.rx.ppp),
+	STAT_GENET_MIB_RX("rx_crc", mib.rx.rcrc),
+	/* UniMAC TSV counters */
+	STAT_GENET_MIB_TX("tx_64_octets", mib.tx.pkt_cnt.cnt_64),
+	STAT_GENET_MIB_TX("tx_65_127_oct", mib.tx.pkt_cnt.cnt_127),
+	STAT_GENET_MIB_TX("tx_128_255_oct", mib.tx.pkt_cnt.cnt_255),
+	STAT_GENET_MIB_TX("tx_256_511_oct", mib.tx.pkt_cnt.cnt_511),
+	STAT_GENET_MIB_TX("tx_512_1023_oct", mib.tx.pkt_cnt.cnt_1023),
+	STAT_GENET_MIB_TX("tx_1024_1518_oct", mib.tx.pkt_cnt.cnt_1518),
+	STAT_GENET_MIB_TX("tx_vlan_1519_1522_oct", mib.tx.pkt_cnt.cnt_mgv),
+	STAT_GENET_MIB_TX("tx_1522_2047_oct", mib.tx.pkt_cnt.cnt_2047),
+	STAT_GENET_MIB_TX("tx_2048_4095_oct", mib.tx.pkt_cnt.cnt_4095),
+	STAT_GENET_MIB_TX("tx_4096_9216_oct", mib.tx.pkt_cnt.cnt_9216),
+	STAT_GENET_MIB_TX("tx_pkts", mib.tx.pkts),
+	STAT_GENET_MIB_TX("tx_multicast", mib.tx.mca),
+	STAT_GENET_MIB_TX("tx_broadcast", mib.tx.bca),
+	STAT_GENET_MIB_TX("tx_pause", mib.tx.pf),
+	STAT_GENET_MIB_TX("tx_control", mib.tx.cf),
+	STAT_GENET_MIB_TX("tx_fcs_err", mib.tx.fcs),
+	STAT_GENET_MIB_TX("tx_oversize", mib.tx.ovr),
+	STAT_GENET_MIB_TX("tx_defer", mib.tx.drf),
+	STAT_GENET_MIB_TX("tx_excess_defer", mib.tx.edf),
+	STAT_GENET_MIB_TX("tx_single_col", mib.tx.scl),
+	STAT_GENET_MIB_TX("tx_multi_col", mib.tx.mcl),
+	STAT_GENET_MIB_TX("tx_late_col", mib.tx.lcl),
+	STAT_GENET_MIB_TX("tx_excess_col", mib.tx.ecl),
+	STAT_GENET_MIB_TX("tx_frags", mib.tx.frg),
+	STAT_GENET_MIB_TX("tx_total_col", mib.tx.ncl),
+	STAT_GENET_MIB_TX("tx_jabber", mib.tx.jbr),
+	STAT_GENET_MIB_TX("tx_bytes", mib.tx.bytes),
+	STAT_GENET_MIB_TX("tx_good_pkts", mib.tx.pok),
+	STAT_GENET_MIB_TX("tx_unicast", mib.tx.uc),
+	/* UniMAC RUNT counters */
+	STAT_GENET_RUNT("rx_runt_pkts", mib.rx_runt_cnt),
+	STAT_GENET_RUNT("rx_runt_valid_fcs", mib.rx_runt_fcs),
+	STAT_GENET_RUNT("rx_runt_inval_fcs_align", mib.rx_runt_fcs_align),
+	STAT_GENET_RUNT("rx_runt_bytes", mib.rx_runt_bytes),
+	/* Misc UniMAC counters */
+	STAT_GENET_MISC("rbuf_ovflow_cnt", mib.rbuf_ovflow_cnt,
+			UMAC_RBUF_OVFL_CNT),
+	STAT_GENET_MISC("rbuf_err_cnt", mib.rbuf_err_cnt, UMAC_RBUF_ERR_CNT),
+	STAT_GENET_MISC("mdf_err_cnt", mib.mdf_err_cnt, UMAC_MDF_ERR_CNT),
+};
+
+#define BCMGENET_STATS_LEN	ARRAY_SIZE(bcmgenet_gstrings_stats)
+
+static void bcmgenet_get_drvinfo(struct net_device *dev,
+		struct ethtool_drvinfo *info)
+{
+	strlcpy(info->driver, "bcmgenet", sizeof(info->driver));
+	strlcpy(info->version, "v2.0", sizeof(info->version));
+	info->n_stats = BCMGENET_STATS_LEN;
+
+}
+
+static int bcmgenet_get_sset_count(struct net_device *dev, int string_set)
+{
+	switch (string_set) {
+	case ETH_SS_STATS:
+		return BCMGENET_STATS_LEN;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static void bcmgenet_get_strings(struct net_device *dev,
+				u32 stringset, u8 *data)
+{
+	int i;
+
+	switch (stringset) {
+	case ETH_SS_STATS:
+		for (i = 0; i < BCMGENET_STATS_LEN; i++) {
+			memcpy(data + i * ETH_GSTRING_LEN,
+				bcmgenet_gstrings_stats[i].stat_string,
+				ETH_GSTRING_LEN);
+		}
+		break;
+	}
+}
+
+static void bcmgenet_update_mib_counters(struct bcmgenet_priv *priv)
+{
+	int i, j = 0;
+
+	for (i = 0; i < BCMGENET_STATS_LEN; i++) {
+		const struct bcmgenet_stats *s;
+		u8 offset = 0;
+		u32 val = 0;
+		char *p;
+
+		s = &bcmgenet_gstrings_stats[i];
+		switch (s->type) {
+		case BCMGENET_STAT_NETDEV:
+			continue;
+		case BCMGENET_STAT_MIB_RX:
+		case BCMGENET_STAT_MIB_TX:
+		case BCMGENET_STAT_RUNT:
+			if (s->type != BCMGENET_STAT_MIB_RX)
+				offset = BCMGENET_STAT_OFFSET;
+			val = bcmgenet_umac_readl(priv, UMAC_MIB_START +
+								j + offset);
+			break;
+		case BCMGENET_STAT_MISC:
+			val = bcmgenet_umac_readl(priv, s->reg_offset);
+			/* clear if overflowed */
+			if (val == ~0)
+				bcmgenet_umac_writel(priv, 0, s->reg_offset);
+			break;
+		}
+
+		j += s->stat_sizeof;
+		p = (char *)priv + s->stat_offset;
+		*(u32 *)p = val;
+	}
+}
+
+static void bcmgenet_get_ethtool_stats(struct net_device *dev,
+					struct ethtool_stats *stats,
+					u64 *data)
+{
+	struct bcmgenet_priv *priv = netdev_priv(dev);
+	int i;
+
+	if (netif_running(dev))
+		bcmgenet_update_mib_counters(priv);
+
+	for (i = 0; i < BCMGENET_STATS_LEN; i++) {
+		const struct bcmgenet_stats *s;
+		char *p;
+
+		s = &bcmgenet_gstrings_stats[i];
+		if (s->type == BCMGENET_STAT_NETDEV)
+			p = (char *)&dev->stats;
+		else
+			p = (char *)priv;
+		p += s->stat_offset;
+		data[i] = *(u32 *)p;
+	}
+}
+
+/* standard ethtool support functions. */
+static struct ethtool_ops bcmgenet_ethtool_ops = {
+	.get_strings		= bcmgenet_get_strings,
+	.get_sset_count		= bcmgenet_get_sset_count,
+	.get_ethtool_stats	= bcmgenet_get_ethtool_stats,
+	.get_settings		= bcmgenet_get_settings,
+	.set_settings		= bcmgenet_set_settings,
+	.get_drvinfo		= bcmgenet_get_drvinfo,
+	.get_link		= ethtool_op_get_link,
+	.get_msglevel		= bcmgenet_get_msglevel,
+	.set_msglevel		= bcmgenet_set_msglevel,
+};
+
+/* Power down the unimac, based on mode. */
+static void bcmgenet_power_down(struct bcmgenet_priv *priv,
+				enum bcmgenet_power_mode mode)
+{
+	u32 reg;
+
+	switch (mode) {
+	case GENET_POWER_CABLE_SENSE:
+		if (priv->phydev)
+			phy_detach(priv->phydev);
+		break;
+
+	case GENET_POWER_PASSIVE:
+		/* Power down LED */
+		bcmgenet_mii_reset(priv->dev);
+		if (priv->hw_params->flags & GENET_HAS_EXT) {
+			reg = bcmgenet_ext_readl(priv, EXT_EXT_PWR_MGMT);
+			reg |= (EXT_PWR_DOWN_PHY |
+				EXT_PWR_DOWN_DLL | EXT_PWR_DOWN_BIAS);
+			bcmgenet_ext_writel(priv, reg, EXT_EXT_PWR_MGMT);
+		}
+		break;
+	default:
+		break;
+	}
+}
+
+static void bcmgenet_power_up(struct bcmgenet_priv *priv,
+				enum bcmgenet_power_mode mode)
+{
+	u32 reg;
+
+	if (!(priv->hw_params->flags & GENET_HAS_EXT))
+		return;
+
+	reg = bcmgenet_ext_readl(priv, EXT_EXT_PWR_MGMT);
+
+	switch (mode) {
+	case GENET_POWER_PASSIVE:
+		reg &= ~(EXT_PWR_DOWN_DLL | EXT_PWR_DOWN_PHY |
+				EXT_PWR_DOWN_BIAS);
+		/* fallthrough */
+	case GENET_POWER_CABLE_SENSE:
+		/* enable APD */
+		reg |= EXT_PWR_DN_EN_LD;
+		break;
+	default:
+		break;
+	}
+
+	bcmgenet_ext_writel(priv, reg, EXT_EXT_PWR_MGMT);
+	bcmgenet_mii_reset(priv->dev);
+}
+
+/* ioctl handle special commands that are not present in ethtool. */
+static int bcmgenet_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+	struct bcmgenet_priv *priv = netdev_priv(dev);
+	int val = 0;
+
+	if (!netif_running(dev))
+		return -EINVAL;
+
+	switch (cmd) {
+	case SIOCGMIIPHY:
+	case SIOCGMIIREG:
+	case SIOCSMIIREG:
+		if (!priv->phydev)
+			val = -ENODEV;
+		else
+			val = phy_mii_ioctl(priv->phydev, rq, cmd);
+		break;
+
+	default:
+		val = -EINVAL;
+		break;
+	}
+
+	return val;
+}
+
+static struct enet_cb *bcmgenet_get_txcb(struct bcmgenet_priv *priv,
+					 struct bcmgenet_tx_ring *ring)
+{
+	struct enet_cb *tx_cb_ptr;
+
+	tx_cb_ptr = ring->cbs;
+	tx_cb_ptr += ring->write_ptr - ring->cb_ptr;
+	tx_cb_ptr->bd_addr = priv->tx_bds + ring->write_ptr * DMA_DESC_SIZE;
+	/* Advancing local write pointer */
+	if (ring->write_ptr == ring->end_ptr)
+		ring->write_ptr = ring->cb_ptr;
+	else
+		ring->write_ptr++;
+
+	return tx_cb_ptr;
+}
+
+/* Simple helper to free a control block's resources */
+static void bcmgenet_free_cb(struct enet_cb *cb)
+{
+	dev_kfree_skb_any(cb->skb);
+	cb->skb = NULL;
+	dma_unmap_addr_set(cb, dma_addr, 0);
+}
+
+static inline void bcmgenet_tx_ring16_int_disable(struct bcmgenet_priv *priv,
+						  struct bcmgenet_tx_ring *ring)
+{
+	bcmgenet_intrl2_0_writel(priv,
+			UMAC_IRQ_TXDMA_BDONE | UMAC_IRQ_TXDMA_PDONE,
+			INTRL2_CPU_MASK_SET);
+}
+
+static inline void bcmgenet_tx_ring16_int_enable(struct bcmgenet_priv *priv,
+						 struct bcmgenet_tx_ring *ring)
+{
+	bcmgenet_intrl2_0_writel(priv,
+			UMAC_IRQ_TXDMA_BDONE | UMAC_IRQ_TXDMA_PDONE,
+			INTRL2_CPU_MASK_CLEAR);
+}
+
+static inline void bcmgenet_tx_ring_int_enable(struct bcmgenet_priv *priv,
+						struct bcmgenet_tx_ring *ring)
+{
+	bcmgenet_intrl2_1_writel(priv,
+			(1 << ring->index), INTRL2_CPU_MASK_CLEAR);
+	priv->int1_mask &= ~(1 << ring->index);
+}
+
+static inline void bcmgenet_tx_ring_int_disable(struct bcmgenet_priv *priv,
+						struct bcmgenet_tx_ring *ring)
+{
+	bcmgenet_intrl2_1_writel(priv,
+			(1 << ring->index), INTRL2_CPU_MASK_SET);
+	priv->int1_mask |= (1 << ring->index);
+}
+
+/* Unlocked version of the reclaim routine */
+static void __bcmgenet_tx_reclaim(struct net_device *dev,
+				struct bcmgenet_tx_ring *ring)
+{
+	struct bcmgenet_priv *priv = netdev_priv(dev);
+	int last_tx_cn, last_c_index, num_tx_bds;
+	struct enet_cb *tx_cb_ptr;
+	unsigned int c_index;
+
+	/* Compute how many buffers are transmited since last xmit call */
+	c_index = bcmgenet_tdma_ring_readl(priv, ring->index, TDMA_CONS_INDEX);
+
+	last_c_index = ring->c_index;
+	num_tx_bds = ring->size;
+
+	c_index &= (num_tx_bds - 1);
+
+	if (c_index >= last_c_index)
+		last_tx_cn = c_index - last_c_index;
+	else
+		last_tx_cn = num_tx_bds - last_c_index + c_index;
+
+	netif_dbg(priv, tx_done, dev,
+			"%s ring=%d index=%d last_tx_cn=%d last_index=%d\n",
+			__func__, ring->index,
+			c_index, last_tx_cn, last_c_index);
+
+	/* Reclaim transmitted buffers */
+	while (last_tx_cn-- > 0) {
+		tx_cb_ptr = ring->cbs + last_c_index;
+		if (tx_cb_ptr->skb) {
+			dev->stats.tx_bytes += tx_cb_ptr->skb->len;
+			dma_unmap_single(&dev->dev,
+					dma_unmap_addr(tx_cb_ptr, dma_addr),
+					tx_cb_ptr->skb->len,
+					DMA_TO_DEVICE);
+			bcmgenet_free_cb(tx_cb_ptr);
+		} else if (dma_unmap_addr(tx_cb_ptr, dma_addr)) {
+			dev->stats.tx_bytes +=
+				dma_unmap_len(tx_cb_ptr, dma_len);
+			dma_unmap_page(&dev->dev,
+					dma_unmap_addr(tx_cb_ptr, dma_addr),
+					dma_unmap_len(tx_cb_ptr, dma_len),
+					DMA_TO_DEVICE);
+			dma_unmap_addr_set(tx_cb_ptr, dma_addr, 0);
+		}
+		dev->stats.tx_packets++;
+		ring->free_bds += 1;
+
+		last_c_index++;
+		last_c_index &= (num_tx_bds - 1);
+	}
+
+	if (ring->free_bds > (MAX_SKB_FRAGS + 1))
+		ring->int_disable(priv, ring);
+
+	if (__netif_subqueue_stopped(dev, ring->queue))
+		netif_wake_subqueue(dev, ring->queue);
+
+	ring->c_index = c_index;
+}
+
+static void bcmgenet_tx_reclaim(struct net_device *dev,
+		struct bcmgenet_tx_ring *ring)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&ring->lock, flags);
+	__bcmgenet_tx_reclaim(dev, ring);
+	spin_unlock_irqrestore(&ring->lock, flags);
+}
+
+static void bcmgenet_tx_reclaim_all(struct net_device *dev)
+{
+	struct bcmgenet_priv *priv = netdev_priv(dev);
+	int i;
+
+	if (netif_is_multiqueue(dev)) {
+		for (i = 0; i < priv->hw_params->tx_queues; i++)
+			bcmgenet_tx_reclaim(dev, &priv->tx_rings[i]);
+	}
+
+	bcmgenet_tx_reclaim(dev, &priv->tx_rings[DESC_INDEX]);
+}
+
+/* Transmits a single SKB (either head of a fragment or a single SKB)
+ * caller must hold priv->lock
+ */
+static int bcmgenet_xmit_single(struct net_device *dev,
+				struct sk_buff *skb,
+				u16 dma_desc_flags,
+				struct bcmgenet_tx_ring *ring)
+{
+	struct bcmgenet_priv *priv = netdev_priv(dev);
+	struct device *kdev = &priv->pdev->dev;
+	struct enet_cb *tx_cb_ptr;
+	unsigned int skb_len;
+	dma_addr_t mapping;
+	u32 length_status;
+	int ret;
+
+	tx_cb_ptr = bcmgenet_get_txcb(priv, ring);
+
+	if (unlikely(!tx_cb_ptr))
+		BUG();
+
+	tx_cb_ptr->skb = skb;
+
+	skb_len = skb_headlen(skb) < ETH_ZLEN ? ETH_ZLEN : skb_headlen(skb);
+
+	mapping = dma_map_single(kdev, skb->data, skb_len, DMA_TO_DEVICE);
+	ret = dma_mapping_error(kdev, mapping);
+	if (ret) {
+		netif_err(priv, tx_err, dev, "Tx DMA map failed\n");
+		dev_kfree_skb(skb);
+		return ret;
+	}
+
+	dma_unmap_addr_set(tx_cb_ptr, dma_addr, mapping);
+	dma_unmap_len_set(tx_cb_ptr, dma_len, skb->len);
+	length_status = (skb_len << DMA_BUFLENGTH_SHIFT) | dma_desc_flags |
+			(priv->hw_params->qtag_mask << DMA_TX_QTAG_SHIFT) |
+			DMA_TX_APPEND_CRC;
+
+	if (skb->ip_summed == CHECKSUM_PARTIAL)
+		length_status |= DMA_TX_DO_CSUM;
+
+	dmadesc_set(priv, tx_cb_ptr->bd_addr, mapping, length_status);
+
+	/* Decrement total BD count and advance our write pointer */
+	ring->free_bds -= 1;
+	ring->prod_index += 1;
+	ring->prod_index &= DMA_P_INDEX_MASK;
+
+	return 0;
+}
+
+/* Transmit a SKB fragement */
+static int bcmgenet_xmit_frag(struct net_device *dev,
+				skb_frag_t *frag,
+				u16 dma_desc_flags,
+				struct bcmgenet_tx_ring *ring)
+{
+	struct bcmgenet_priv *priv = netdev_priv(dev);
+	struct device *kdev = &priv->pdev->dev;
+	struct enet_cb *tx_cb_ptr;
+	dma_addr_t mapping;
+	int ret;
+
+	tx_cb_ptr = bcmgenet_get_txcb(priv, ring);
+
+	if (unlikely(!tx_cb_ptr))
+		BUG();
+	tx_cb_ptr->skb = NULL;
+
+	mapping = skb_frag_dma_map(kdev, frag, 0,
+		skb_frag_size(frag), DMA_TO_DEVICE);
+	ret = dma_mapping_error(kdev, mapping);
+	if (ret) {
+		netif_err(priv, tx_err, dev, "%s: Tx DMA map failed\n",
+				__func__);
+		return ret;
+	}
+
+	dma_unmap_addr_set(tx_cb_ptr, dma_addr, mapping);
+	dma_unmap_len_set(tx_cb_ptr, dma_len, frag->size);
+
+	dmadesc_set(priv, tx_cb_ptr->bd_addr, mapping,
+			(frag->size << DMA_BUFLENGTH_SHIFT) | dma_desc_flags |
+			(priv->hw_params->qtag_mask << DMA_TX_QTAG_SHIFT));
+
+
+	ring->free_bds -= 1;
+	ring->prod_index += 1;
+	ring->prod_index &= DMA_P_INDEX_MASK;
+
+	return 0;
+}
+
+/* Reallocate the SKB to put enough headroom in front of it and insert
+ * the transmit checksum offsets in the descriptors
+ */
+static int bcmgenet_put_tx_csum(struct net_device *dev, struct sk_buff *skb)
+{
+	struct status_64 *status = NULL;
+	struct sk_buff *new_skb;
+	u16 offset;
+	u8 ip_proto;
+	u16 ip_ver;
+	u32 tx_csum_info;
+
+	if (unlikely(skb_headroom(skb) < sizeof(*status))) {
+		/* If 64 byte status block enabled, must make sure skb has
+		 * enough headroom for us to insert 64B status block.
+		 */
+		new_skb = skb_realloc_headroom(skb, sizeof(*status));
+		dev_kfree_skb(skb);
+		if (!new_skb) {
+			dev->stats.tx_errors++;
+			dev->stats.tx_dropped++;
+			return -ENOMEM;
+		}
+		skb = new_skb;
+	}
+
+	skb_push(skb, sizeof(*status));
+	status = (struct status_64 *)skb->data;
+
+	if (skb->ip_summed  == CHECKSUM_PARTIAL) {
+		ip_ver = htons(skb->protocol);
+		switch (ip_ver) {
+		case ETH_P_IP:
+			ip_proto = ip_hdr(skb)->protocol;
+			break;
+		case ETH_P_IPV6:
+			ip_proto = ipv6_hdr(skb)->nexthdr;
+			break;
+		default:
+			return 0;
+		}
+
+		offset = skb_checksum_start_offset(skb) - sizeof(*status);
+		tx_csum_info = (offset << STATUS_TX_CSUM_START_SHIFT) |
+				(offset + skb->csum_offset);
+
+		/* Set the length valid bit for TCP and UDP and just set
+		 * the special UDP flag for IPv4, else just set to 0.
+		 */
+		if (ip_proto == IPPROTO_TCP || ip_proto == IPPROTO_UDP) {
+			tx_csum_info |= STATUS_TX_CSUM_LV;
+			if (ip_proto == IPPROTO_UDP && ip_ver == ETH_P_IP)
+				tx_csum_info |= STATUS_TX_CSUM_PROTO_UDP;
+		} else
+			tx_csum_info = 0;
+
+		status->tx_csum_info = tx_csum_info;
+	}
+
+	return 0;
+}
+
+static netdev_tx_t bcmgenet_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct bcmgenet_priv *priv = netdev_priv(dev);
+	struct bcmgenet_tx_ring *ring = NULL;
+	unsigned long flags = 0;
+	int nr_frags, index;
+	u16 dma_desc_flags;
+	int ret;
+	int i;
+
+	index = skb_get_queue_mapping(skb);
+	/* Mapping strategy:
+	 * queue_mapping = 0, unclassified, packet xmited through ring16
+	 * queue_mapping = 1, goes to ring 0. (highest priority queue
+	 * queue_mapping = 2, goes to ring 1.
+	 * queue_mapping = 3, goes to ring 2.
+	 * queue_mapping = 4, goes to ring 3.
+	 */
+	if (index == 0)
+		index = DESC_INDEX;
+	else
+		index -= 1;
+
+	if ((index != DESC_INDEX) && (index > priv->hw_params->tx_queues - 1)) {
+		netdev_err(dev, "%s: queue_mapping %d is invalid\n",
+				__func__, skb_get_queue_mapping(skb));
+		dev->stats.tx_errors++;
+		dev->stats.tx_dropped++;
+		ret = NETDEV_TX_OK;
+		goto out;
+	}
+	nr_frags = skb_shinfo(skb)->nr_frags;
+	ring = &priv->tx_rings[index];
+
+	spin_lock_irqsave(&ring->lock, flags);
+	if (ring->free_bds <= nr_frags + 1) {
+		netif_stop_subqueue(dev, ring->queue);
+		netdev_err(dev, "%s: tx ring %d full when queue %d awake\n",
+				__func__, index, ring->queue);
+		ret = NETDEV_TX_BUSY;
+		goto out;
+	}
+
+	/* reclaim xmited skb every 8 packets. */
+	/*if (ring->free_bds < ring->size - 8)*/
+		/*__bcmgenet_tx_reclaim(dev, ring);*/
+
+	/* set the SKB transmit checksum */
+	if (priv->desc_64b_en) {
+		ret = bcmgenet_put_tx_csum(dev, skb);
+		if (ret) {
+			ret = NETDEV_TX_OK;
+			goto out;
+		}
+	}
+
+	dma_desc_flags = DMA_SOP;
+	if (nr_frags == 0)
+		dma_desc_flags |= DMA_EOP;
+
+	/* Transmit single SKB or head of fragment list */
+	ret = bcmgenet_xmit_single(dev, skb, dma_desc_flags, ring);
+	if (ret) {
+		ret = NETDEV_TX_OK;
+		goto out;
+	}
+
+	/* xmit fragment */
+	for (i = 0; i < nr_frags; i++) {
+		ret = bcmgenet_xmit_frag(dev,
+				&skb_shinfo(skb)->frags[i],
+				(i == nr_frags - 1) ? DMA_EOP : 0, ring);
+		if (ret) {
+			ret = NETDEV_TX_OK;
+			goto out;
+		}
+	}
+
+	/* we kept a software copy of how much we should advance the TDMA
+	 * producer index, now write it down to the hardware
+	 */
+	bcmgenet_tdma_ring_writel(priv, ring->index,
+			ring->prod_index, TDMA_PROD_INDEX);
+
+	if (ring->free_bds <= (MAX_SKB_FRAGS + 1)) {
+		netif_stop_subqueue(dev, ring->queue);
+		ring->int_enable(priv, ring);
+	}
+
+out:
+	spin_unlock_irqrestore(&ring->lock, flags);
+
+	return ret;
+}
+
+
+static int bcmgenet_rx_refill(struct bcmgenet_priv *priv,
+				struct enet_cb *cb)
+{
+	struct device *kdev = &priv->pdev->dev;
+	struct sk_buff *skb;
+	dma_addr_t mapping;
+	int ret;
+
+	skb = netdev_alloc_skb(priv->dev,
+				priv->rx_buf_len + SKB_ALIGNMENT);
+	if (!skb)
+		return -ENOMEM;
+
+	/* a caller did not release this control block */
+	WARN_ON(cb->skb != NULL);
+	cb->skb = skb;
+	mapping = dma_map_single(kdev, skb->data,
+			priv->rx_buf_len, DMA_FROM_DEVICE);
+	ret = dma_mapping_error(kdev, mapping);
+	if (ret) {
+		bcmgenet_free_cb(cb);
+		netif_err(priv, rx_err, priv->dev,
+				"%s DMA map failed\n", __func__);
+		return ret;
+	}
+
+	dma_unmap_addr_set(cb, dma_addr, mapping);
+	/* assign packet, prepare descriptor, and advance pointer */
+
+	dmadesc_set_addr(priv, priv->rx_bd_assign_ptr, mapping);
+
+	/* turn on the newly assigned BD for DMA to use */
+	priv->rx_bd_assign_index++;
+	priv->rx_bd_assign_index &= (priv->num_rx_bds - 1);
+
+	priv->rx_bd_assign_ptr = priv->rx_bds +
+		(priv->rx_bd_assign_index * DMA_DESC_SIZE);
+
+	return 0;
+}
+
+/* bcmgenet_desc_rx - descriptor based rx process.
+ * this could be called from bottom half, or from NAPI polling method.
+ */
+static unsigned int bcmgenet_desc_rx(struct bcmgenet_priv *priv,
+				     unsigned int budget)
+{
+	struct net_device *dev = priv->dev;
+	struct enet_cb *cb;
+	struct sk_buff *skb;
+	u32 dma_length_status;
+	unsigned long dma_flag;
+	int len, err;
+	unsigned int rxpktprocessed = 0, rxpkttoprocess;
+	unsigned int p_index;
+	unsigned int chksum_ok = 0;
+
+	p_index = bcmgenet_rdma_ring_readl(priv,
+			DESC_INDEX, RDMA_PROD_INDEX);
+	p_index &= DMA_P_INDEX_MASK;
+
+	if (p_index < priv->rx_c_index)
+		rxpkttoprocess = (DMA_C_INDEX_MASK + 1) -
+			priv->rx_c_index + p_index;
+	else
+		rxpkttoprocess = p_index - priv->rx_c_index;
+
+	netif_dbg(priv, rx_status, dev,
+		"RDMA: rxpkttoprocess=%d\n", rxpkttoprocess);
+
+	while ((rxpktprocessed < rxpkttoprocess) &&
+			(rxpktprocessed < budget)) {
+
+		/* Unmap the packet contents such that we can use the
+		 * RSV from the 64 bytes descriptor when enabled and save
+		 * a 32-bits register read
+		 */
+		cb = &priv->rx_cbs[priv->rx_read_ptr];
+		skb = cb->skb;
+		dma_unmap_single(&dev->dev, dma_unmap_addr(cb, dma_addr),
+				priv->rx_buf_len, DMA_FROM_DEVICE);
+
+		if (!priv->desc_64b_en) {
+			dma_length_status = dmadesc_get_length_status(priv,
+							priv->rx_bds +
+							(priv->rx_read_ptr *
+							 DMA_DESC_SIZE));
+		} else {
+			struct status_64 *status;
+			status = (struct status_64 *)skb->data;
+			dma_length_status = status->length_status;
+		}
+
+		/* DMA flags and length are still valid no matter how
+		 * we got the Receive Status Vector (64B RSB or register)
+		 */
+		dma_flag = dma_length_status & 0xffff;
+		len = dma_length_status >> DMA_BUFLENGTH_SHIFT;
+
+		netif_dbg(priv, rx_status, dev,
+			"%s: p_ind=%d c_ind=%d read_ptr=%d len_stat=0x%08x\n",
+			__func__, p_index, priv->rx_c_index, priv->rx_read_ptr,
+			dma_length_status);
+
+		rxpktprocessed++;
+
+		priv->rx_read_ptr++;
+		priv->rx_read_ptr &= (priv->num_rx_bds - 1);
+
+		/* out of memory, just drop packets at the hardware level */
+		if (unlikely(!skb)) {
+			dev->stats.rx_dropped++;
+			dev->stats.rx_errors++;
+			goto refill;
+		}
+
+		if (unlikely(!(dma_flag & DMA_EOP) || !(dma_flag & DMA_SOP))) {
+			netif_err(priv, rx_status, dev,
+					"Droping fragmented packet!\n");
+			dev->stats.rx_dropped++;
+			dev->stats.rx_errors++;
+			dev_kfree_skb_any(cb->skb);
+			cb->skb = NULL;
+			goto refill;
+		}
+		/* report errors */
+		if (unlikely(dma_flag & (DMA_RX_CRC_ERROR |
+						DMA_RX_OV |
+						DMA_RX_NO |
+						DMA_RX_LG |
+						DMA_RX_RXER))) {
+			netif_err(priv, rx_status, dev, "dma_flag=0x%x\n",
+						(unsigned int)dma_flag);
+			if (dma_flag & DMA_RX_CRC_ERROR)
+				dev->stats.rx_crc_errors++;
+			if (dma_flag & DMA_RX_OV)
+				dev->stats.rx_over_errors++;
+			if (dma_flag & DMA_RX_NO)
+				dev->stats.rx_frame_errors++;
+			if (dma_flag & DMA_RX_LG)
+				dev->stats.rx_length_errors++;
+			dev->stats.rx_dropped++;
+			dev->stats.rx_errors++;
+
+			/* discard the packet and advance consumer index.*/
+			dev_kfree_skb_any(cb->skb);
+			cb->skb = NULL;
+			goto refill;
+		} /* error packet */
+
+		chksum_ok = (dma_flag & priv->dma_rx_chk_bit) &&
+				priv->desc_rxchk_en;
+
+		skb_put(skb, len);
+		if (priv->desc_64b_en) {
+			skb_pull(skb, 64);
+			len -= 64;
+		}
+
+		if (likely(chksum_ok))
+			skb->ip_summed = CHECKSUM_UNNECESSARY;
+
+		/* remove hardware 2bytes added for IP alignment */
+		skb_pull(skb, 2);
+		len -= 2;
+
+		if (priv->crc_fwd_en) {
+			skb_trim(skb, len - ETH_FCS_LEN);
+			len -= ETH_FCS_LEN;
+		}
+
+		/*Finish setting up the received SKB and send it to the kernel*/
+		skb->protocol = eth_type_trans(skb, priv->dev);
+		dev->stats.rx_packets++;
+		dev->stats.rx_bytes += len;
+		if (dma_flag & DMA_RX_MULT)
+			dev->stats.multicast++;
+
+		/* Notify kernel */
+		napi_gro_receive(&priv->napi, skb);
+		cb->skb = NULL;
+		netif_dbg(priv, rx_status, dev, "pushed up to kernel\n");
+
+		/* refill RX path on the current control block */
+refill:
+		err = bcmgenet_rx_refill(priv, cb);
+		if (err)
+			netif_err(priv, rx_err, dev, "Rx refill failed\n");
+	}
+
+	return rxpktprocessed;
+}
+
+/* Assign skb to RX DMA descriptor. */
+static int bcmgenet_alloc_rx_buffers(struct bcmgenet_priv *priv)
+{
+	struct enet_cb *cb;
+	int ret = 0;
+	int i;
+
+	netif_dbg(priv, hw, priv->dev, "%s:\n", __func__);
+
+	/* loop here for each buffer needing assign */
+	for (i = 0; i < priv->num_rx_bds; i++) {
+		cb = &priv->rx_cbs[priv->rx_bd_assign_index];
+		if (cb->skb)
+			continue;
+
+		/* set the DMA descriptor length once and for all
+		 * it will only change if we support dynamically sizing
+		 * priv->rx_buf_len, but we do not
+		 */
+		dmadesc_set_length_status(priv, priv->rx_bd_assign_ptr,
+				priv->rx_buf_len << DMA_BUFLENGTH_SHIFT);
+
+		ret = bcmgenet_rx_refill(priv, cb);
+		if (ret)
+			break;
+
+	}
+
+	return ret;
+}
+
+static void bcmgenet_free_rx_buffers(struct bcmgenet_priv *priv)
+{
+	struct enet_cb *cb;
+	int i;
+
+	for (i = 0; i < priv->num_rx_bds; i++) {
+		cb = &priv->rx_cbs[i];
+
+		if (dma_unmap_addr(cb, dma_addr)) {
+			dma_unmap_single(&priv->dev->dev,
+					dma_unmap_addr(cb, dma_addr),
+					priv->rx_buf_len, DMA_FROM_DEVICE);
+			dma_unmap_addr_set(cb, dma_addr, 0);
+		}
+
+		if (cb->skb)
+			bcmgenet_free_cb(cb);
+	}
+}
+
+static int reset_umac(struct bcmgenet_priv *priv)
+{
+	struct device *kdev = &priv->pdev->dev;
+	unsigned int timeout = 0;
+	u32 reg;
+
+	/* 7358a0/7552a0: bad default in RBUF_FLUSH_CTRL.umac_sw_rst */
+	bcmgenet_rbuf_ctrl_set(priv, 0);
+	udelay(10);
+
+	/* disable MAC while updating its registers */
+	bcmgenet_umac_writel(priv, 0, UMAC_CMD);
+
+	/* issue soft reset, wait for it to complete */
+	bcmgenet_umac_writel(priv, CMD_SW_RESET, UMAC_CMD);
+	while (timeout++ < 1000) {
+		reg = bcmgenet_umac_readl(priv, UMAC_CMD);
+		if (!(reg & CMD_SW_RESET))
+			return 0;
+
+		udelay(1);
+	}
+
+	if (timeout == 1000) {
+		dev_err(kdev,
+			"timeout waiting for MAC to come out of resetn\n");
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static int init_umac(struct bcmgenet_priv *priv)
+{
+	struct device *kdev = &priv->pdev->dev;
+	int ret;
+	u32 reg, cpu_mask_clear;
+
+	dev_dbg(&priv->pdev->dev, "bcmgenet: init_umac\n");
+
+	ret = reset_umac(priv);
+	if (ret)
+		return ret;
+
+	bcmgenet_umac_writel(priv, 0, UMAC_CMD);
+	/* clear tx/rx counter */
+	bcmgenet_umac_writel(priv,
+		MIB_RESET_RX | MIB_RESET_TX | MIB_RESET_RUNT, UMAC_MIB_CTRL);
+	bcmgenet_umac_writel(priv, 0, UMAC_MIB_CTRL);
+
+	bcmgenet_umac_writel(priv, ENET_MAX_MTU_SIZE, UMAC_MAX_FRAME_LEN);
+
+	/* init rx registers, enable ip header optimization */
+	reg = bcmgenet_rbuf_readl(priv, RBUF_CTRL);
+	reg |= RBUF_ALIGN_2B;
+	bcmgenet_rbuf_writel(priv, reg, RBUF_CTRL);
+
+	if (!GENET_IS_V1(priv) && !GENET_IS_V2(priv))
+		bcmgenet_rbuf_writel(priv, 1, RBUF_TBUF_SIZE_CTRL);
+
+	/* Mask all interrupts.*/
+	bcmgenet_intrl2_0_writel(priv, 0xFFFFFFFF, INTRL2_CPU_MASK_SET);
+	bcmgenet_intrl2_0_writel(priv, 0xFFFFFFFF, INTRL2_CPU_CLEAR);
+	bcmgenet_intrl2_0_writel(priv, 0, INTRL2_CPU_MASK_CLEAR);
+
+	cpu_mask_clear = UMAC_IRQ_RXDMA_BDONE;
+
+	dev_dbg(kdev, "%s:Enabling RXDMA_BDONE interrupt\n", __func__);
+
+	/* Monitor cable plug/unpluged event for internal PHY */
+	if (phy_is_internal(priv->phydev))
+		cpu_mask_clear |= (UMAC_IRQ_LINK_DOWN | UMAC_IRQ_LINK_UP);
+	else if (priv->ext_phy)
+		cpu_mask_clear |= (UMAC_IRQ_LINK_DOWN | UMAC_IRQ_LINK_UP);
+	else if (priv->phy_interface == PHY_INTERFACE_MODE_MOCA) {
+		reg = bcmgenet_bp_mc_get(priv);
+		reg |= BIT(priv->hw_params->bp_in_en_shift);
+
+		/* bp_mask: back pressure mask */
+		if (netif_is_multiqueue(priv->dev))
+			reg |= priv->hw_params->bp_in_mask;
+		else
+			reg &= ~priv->hw_params->bp_in_mask;
+		bcmgenet_bp_mc_set(priv, reg);
+	}
+
+	/* Enable MDIO interrupts on GENET v3+ */
+	if (priv->hw_params->flags & GENET_HAS_MDIO_INTR)
+		cpu_mask_clear |= UMAC_IRQ_MDIO_DONE | UMAC_IRQ_MDIO_ERROR;
+
+	bcmgenet_intrl2_0_writel(priv, cpu_mask_clear,
+		INTRL2_CPU_MASK_CLEAR);
+
+	/* Enable rx/tx engine.*/
+	dev_dbg(kdev, "done init umac\n");
+
+	return 0;
+}
+
+/* Initialize all house-keeping variables for a TX ring, along
+ * with corresponding hardware registers
+ */
+static void bcmgenet_init_tx_ring(struct bcmgenet_priv *priv,
+				  unsigned int index, unsigned int size,
+				  unsigned int write_ptr, unsigned int end_ptr)
+{
+	struct bcmgenet_tx_ring *ring = &priv->tx_rings[index];
+	u32 words_per_bd = WORDS_PER_BD(priv);
+	u32 flow_period_val = 0;
+	unsigned int first_bd;
+
+	spin_lock_init(&ring->lock);
+	ring->index = index;
+	if (index == DESC_INDEX) {
+		ring->queue = 0;
+		ring->int_enable = bcmgenet_tx_ring16_int_enable;
+		ring->int_disable = bcmgenet_tx_ring16_int_disable;
+	} else {
+		ring->queue = index + 1;
+		ring->int_enable = bcmgenet_tx_ring_int_enable;
+		ring->int_disable = bcmgenet_tx_ring_int_disable;
+	}
+	ring->cbs = priv->tx_cbs + write_ptr;
+	ring->size = size;
+	ring->c_index = 0;
+	ring->free_bds = size;
+	ring->write_ptr = write_ptr;
+	ring->cb_ptr = write_ptr;
+	ring->end_ptr = end_ptr - 1;
+	ring->prod_index = 0;
+
+	/* Set flow period for ring != 16 */
+	if (index != DESC_INDEX)
+		flow_period_val = ENET_MAX_MTU_SIZE << 16;
+
+	bcmgenet_tdma_ring_writel(priv, index, 0, TDMA_PROD_INDEX);
+	bcmgenet_tdma_ring_writel(priv, index, 0, TDMA_CONS_INDEX);
+	bcmgenet_tdma_ring_writel(priv, index, 1, DMA_MBUF_DONE_THRESH);
+	/* Disable rate control for now */
+	bcmgenet_tdma_ring_writel(priv, index, flow_period_val,
+			TDMA_FLOW_PERIOD);
+	/* Unclassified traffic goes to ring 16 */
+	bcmgenet_tdma_ring_writel(priv, index,
+			((size << DMA_RING_SIZE_SHIFT) | RX_BUF_LENGTH),
+			DMA_RING_BUF_SIZE);
+
+	first_bd = write_ptr;
+
+	/* Set start and end address, read and write pointers */
+	bcmgenet_tdma_ring_writel(priv, index, first_bd * words_per_bd,
+			DMA_START_ADDR);
+	bcmgenet_tdma_ring_writel(priv, index, first_bd * words_per_bd,
+			TDMA_READ_PTR);
+	bcmgenet_tdma_ring_writel(priv, index, first_bd,
+			TDMA_WRITE_PTR);
+	bcmgenet_tdma_ring_writel(priv, index, end_ptr * words_per_bd - 1,
+			DMA_END_ADDR);
+}
+
+/* Initialize a RDMA ring */
+static int bcmgenet_init_rx_ring(struct bcmgenet_priv *priv,
+				  unsigned int index, unsigned int size)
+{
+	u32 words_per_bd = WORDS_PER_BD(priv);
+	int ret;
+
+	priv->num_rx_bds = TOTAL_DESC;
+	priv->rx_bds = priv->base + priv->hw_params->rdma_offset;
+	priv->rx_bd_assign_ptr = priv->rx_bds;
+	priv->rx_bd_assign_index = 0;
+	priv->rx_c_index = 0;
+	priv->rx_read_ptr = 0;
+	priv->rx_cbs = kzalloc(priv->num_rx_bds * sizeof(struct enet_cb),
+				GFP_KERNEL);
+	if (!priv->rx_cbs)
+		return -ENOMEM;
+
+	ret = bcmgenet_alloc_rx_buffers(priv);
+	if (ret) {
+		kfree(priv->rx_cbs);
+		return ret;
+	}
+
+	bcmgenet_rdma_ring_writel(priv, index, 0, RDMA_WRITE_PTR);
+	bcmgenet_rdma_ring_writel(priv, index, 0, RDMA_PROD_INDEX);
+	bcmgenet_rdma_ring_writel(priv, index, 0, RDMA_CONS_INDEX);
+	bcmgenet_rdma_ring_writel(priv, index,
+		((size << DMA_RING_SIZE_SHIFT) | RX_BUF_LENGTH),
+		DMA_RING_BUF_SIZE);
+	bcmgenet_rdma_ring_writel(priv, index, 0, DMA_START_ADDR);
+	bcmgenet_rdma_ring_writel(priv, index,
+		words_per_bd * size - 1, DMA_END_ADDR);
+	bcmgenet_rdma_ring_writel(priv, index,
+			(DMA_FC_THRESH_LO << DMA_XOFF_THRESHOLD_SHIFT) |
+			DMA_FC_THRESH_HI, RDMA_XON_XOFF_THRESH);
+	bcmgenet_rdma_ring_writel(priv, index, 0, RDMA_READ_PTR);
+
+	return ret;
+}
+
+/* init multi xmit queues, only available for GENET2+
+ * the queue is partitioned as follows:
+ *
+ * queue 0 - 3 is priority based, each one has 32 descriptors,
+ * with queue 0 being the highest priority queue.
+ *
+ * queue 16 is the default tx queue with GENET_DEFAULT_BD_CNT
+ * descriptors: 256 - (number of tx queues * bds per queues) = 128
+ * descriptors.
+ *
+ * The transmit control block pool is then partitioned as following:
+ * - tx_cbs[0...127] are for queue 16
+ * - tx_ring_cbs[0] points to tx_cbs[128..159]
+ * - tx_ring_cbs[1] points to tx_cbs[160..191]
+ * - tx_ring_cbs[2] points to tx_cbs[192..223]
+ * - tx_ring_cbs[3] points to tx_cbs[224..255]
+ */
+static void bcmgenet_init_multiq(struct net_device *dev)
+{
+	struct bcmgenet_priv *priv = netdev_priv(dev);
+	unsigned int i, dma_enable;
+	u32 reg, dma_ctrl, ring_cfg = 0, dma_priority = 0;
+
+	if (!netif_is_multiqueue(dev)) {
+		netdev_warn(dev, "called with non multi queue aware HW\n");
+		return;
+	}
+
+	dma_ctrl = bcmgenet_tdma_readl(priv, DMA_CTRL);
+	dma_enable = dma_ctrl & DMA_EN;
+	dma_ctrl &= ~DMA_EN;
+	bcmgenet_tdma_writel(priv, dma_ctrl, DMA_CTRL);
+
+	/* Enable strict priority arbiter mode */
+	bcmgenet_tdma_writel(priv, DMA_ARBITER_SP, DMA_ARB_CTRL);
+
+	for (i = 0; i < priv->hw_params->tx_queues; i++) {
+		/* first 64 tx_cbs are reserved for default tx queue
+		 * (ring 16)
+		 */
+		bcmgenet_init_tx_ring(priv, i, priv->hw_params->bds_cnt,
+					i * priv->hw_params->bds_cnt,
+					(i + 1) * priv->hw_params->bds_cnt);
+
+		/* Configure ring as decriptor ring and setup priority */
+		ring_cfg |= 1 << i;
+		dma_priority |= ((GENET_Q0_PRIORITY + i) <<
+				(GENET_MAX_MQ_CNT + 1) * i);
+		dma_ctrl |= 1 << (i + DMA_RING_BUF_EN_SHIFT);
+	}
+
+	/* Enable rings */
+	reg = bcmgenet_tdma_readl(priv, DMA_RING_CFG);
+	reg |= ring_cfg;
+	bcmgenet_tdma_writel(priv, reg, DMA_RING_CFG);
+
+	/* Use configured rings priority and set ring #16 priority */
+	reg = bcmgenet_tdma_readl(priv, DMA_RING_PRIORITY);
+	reg |= ((GENET_Q0_PRIORITY + priv->hw_params->tx_queues) << 20);
+	reg |= dma_priority;
+	bcmgenet_tdma_writel(priv, reg, DMA_PRIORITY);
+
+	/* Configure ring as descriptor ring and re-enable DMA if enabled */
+	reg = bcmgenet_tdma_readl(priv, DMA_CTRL);
+	reg |= dma_ctrl;
+	if (dma_enable)
+		reg |= DMA_EN;
+	bcmgenet_tdma_writel(priv, reg, DMA_CTRL);
+}
+
+static void bcmgenet_fini_dma(struct bcmgenet_priv *priv)
+{
+	int i;
+
+	/* disable DMA */
+	bcmgenet_rdma_writel(priv, 0, DMA_CTRL);
+	bcmgenet_tdma_writel(priv, 0, DMA_CTRL);
+
+	for (i = 0; i < priv->num_tx_bds; i++) {
+		if (priv->tx_cbs[i].skb != NULL) {
+			dev_kfree_skb(priv->tx_cbs[i].skb);
+			priv->tx_cbs[i].skb = NULL;
+		}
+	}
+
+	bcmgenet_free_rx_buffers(priv);
+	kfree(priv->rx_cbs);
+	kfree(priv->tx_cbs);
+}
+
+/* init_edma: Initialize DMA control register */
+static int bcmgenet_init_dma(struct bcmgenet_priv *priv)
+{
+	int ret;
+
+	netif_dbg(priv, hw, priv->dev, "bcmgenet: init_edma\n");
+
+	/* by default, enable ring 16 (descriptor based) */
+	ret = bcmgenet_init_rx_ring(priv, DESC_INDEX, TOTAL_DESC);
+	if (ret) {
+		netdev_err(priv->dev, "failed to initialize RX ring\n");
+		return ret;
+	}
+
+	/* init rDma */
+	bcmgenet_rdma_writel(priv, DMA_MAX_BURST_LENGTH, DMA_SCB_BURST_SIZE);
+
+	/* Init tDma */
+	bcmgenet_tdma_writel(priv, DMA_MAX_BURST_LENGTH, DMA_SCB_BURST_SIZE);
+
+	/* Initialize commont TX ring structures */
+	priv->tx_bds = priv->base + priv->hw_params->tdma_offset;
+	priv->num_tx_bds = TOTAL_DESC;
+	priv->tx_cbs = kzalloc(priv->num_tx_bds * sizeof(struct enet_cb),
+				GFP_KERNEL);
+	if (!priv->tx_cbs) {
+		bcmgenet_fini_dma(priv);
+		return -ENOMEM;
+	}
+
+	/* initialize multi xmit queue */
+	bcmgenet_init_multiq(priv->dev);
+
+	/* initialize special ring 16 */
+	bcmgenet_init_tx_ring(priv, DESC_INDEX, GENET_DEFAULT_BD_CNT,
+			priv->hw_params->tx_queues * priv->hw_params->bds_cnt,
+			TOTAL_DESC);
+
+	return 0;
+}
+
+/* NAPI polling method*/
+static int bcmgenet_poll(struct napi_struct *napi, int budget)
+{
+	struct bcmgenet_priv *priv = container_of(napi,
+			struct bcmgenet_priv, napi);
+	unsigned int work_done;
+
+	/* tx reclaim */
+	bcmgenet_tx_reclaim(priv->dev, &priv->tx_rings[DESC_INDEX]);
+
+	work_done = bcmgenet_desc_rx(priv, budget);
+
+	/* Advancing our consumer index*/
+	priv->rx_c_index += work_done;
+	priv->rx_c_index &= DMA_C_INDEX_MASK;
+	bcmgenet_rdma_ring_writel(priv, DESC_INDEX,
+				priv->rx_c_index, RDMA_CONS_INDEX);
+	if (work_done < budget) {
+		napi_complete(napi);
+		bcmgenet_intrl2_0_writel(priv,
+			UMAC_IRQ_RXDMA_BDONE, INTRL2_CPU_MASK_CLEAR);
+	}
+
+	return work_done;
+}
+
+/* Interrupt bottom half */
+static void bcmgenet_irq_task(struct work_struct *work)
+{
+	struct bcmgenet_priv *priv = container_of(
+			work, struct bcmgenet_priv, bcmgenet_irq_work);
+
+	netif_dbg(priv, intr, priv->dev, "%s\n", __func__);
+
+	/* Link UP/DOWN event */
+	if ((priv->hw_params->flags & GENET_HAS_MDIO_INTR) &&
+		(priv->irq0_stat & (UMAC_IRQ_LINK_UP|UMAC_IRQ_LINK_DOWN))) {
+		if (priv->phydev)
+			phy_mac_interrupt(priv->phydev,
+				(priv->irq0_stat & UMAC_IRQ_LINK_UP));
+		priv->irq0_stat &= ~(UMAC_IRQ_LINK_UP|UMAC_IRQ_LINK_DOWN);
+	}
+}
+
+/* bcmgenet_isr1: interrupt handler for ring buffer. */
+static irqreturn_t bcmgenet_isr1(int irq, void *dev_id)
+{
+	struct bcmgenet_priv *priv = dev_id;
+	unsigned int index;
+
+	/* Save irq status for bottom-half processing. */
+	priv->irq1_stat =
+		bcmgenet_intrl2_1_readl(priv, INTRL2_CPU_STAT) &
+		~priv->int1_mask;
+	/* clear inerrupts*/
+	bcmgenet_intrl2_1_writel(priv, priv->irq1_stat, INTRL2_CPU_CLEAR);
+
+	netif_dbg(priv, intr, priv->dev,
+		"%s: IRQ=0x%x\n", __func__, priv->irq1_stat);
+	/* Check the MBDONE interrupts.
+	 * packet is done, reclaim descriptors
+	 */
+	if (priv->irq1_stat & 0x0000ffff) {
+		index = 0;
+		for (index = 0; index < 16; index++) {
+			if (priv->irq1_stat & (1 << index))
+				bcmgenet_tx_reclaim(priv->dev,
+						&priv->tx_rings[index]);
+		}
+	}
+	return IRQ_HANDLED;
+}
+
+/* bcmgenet_isr0: Handle various interrupts. */
+static irqreturn_t bcmgenet_isr0(int irq, void *dev_id)
+{
+	struct bcmgenet_priv *priv = dev_id;
+
+	/* Save irq status for bottom-half processing. */
+	priv->irq0_stat =
+		bcmgenet_intrl2_0_readl(priv, INTRL2_CPU_STAT) &
+		~bcmgenet_intrl2_0_readl(priv, INTRL2_CPU_MASK_STATUS);
+	/* clear inerrupts*/
+	bcmgenet_intrl2_0_writel(priv, priv->irq0_stat, INTRL2_CPU_CLEAR);
+
+	netif_dbg(priv, intr, priv->dev,
+		"IRQ=0x%x\n", priv->irq0_stat);
+
+	if (priv->irq0_stat & (UMAC_IRQ_RXDMA_BDONE | UMAC_IRQ_RXDMA_PDONE)) {
+		/* We use NAPI(software interrupt throttling, if
+		 * Rx Descriptor throttling is not used.
+		 * Disable interrupt, will be enabled in the poll method.
+		 */
+		if (likely(napi_schedule_prep(&priv->napi))) {
+			bcmgenet_intrl2_0_writel(priv,
+				UMAC_IRQ_RXDMA_BDONE, INTRL2_CPU_MASK_SET);
+			__napi_schedule(&priv->napi);
+		}
+	}
+	if (priv->irq0_stat &
+			(UMAC_IRQ_TXDMA_BDONE | UMAC_IRQ_TXDMA_PDONE)) {
+		/* Tx reclaim */
+		bcmgenet_tx_reclaim(priv->dev, &priv->tx_rings[DESC_INDEX]);
+	}
+	if (priv->irq0_stat & (UMAC_IRQ_PHY_DET_R |
+				UMAC_IRQ_PHY_DET_F |
+				UMAC_IRQ_LINK_UP |
+				UMAC_IRQ_LINK_DOWN |
+				UMAC_IRQ_HFB_SM |
+				UMAC_IRQ_HFB_MM |
+				UMAC_IRQ_MPD_R)) {
+		/* all other interested interrupts handled in bottom half */
+		schedule_work(&priv->bcmgenet_irq_work);
+	}
+
+	if ((priv->hw_params->flags & GENET_HAS_MDIO_INTR) &&
+		priv->irq0_stat & (UMAC_IRQ_MDIO_DONE | UMAC_IRQ_MDIO_ERROR)) {
+		priv->irq0_stat &= ~(UMAC_IRQ_MDIO_DONE | UMAC_IRQ_MDIO_ERROR);
+		wake_up(&priv->wq);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void bcmgenet_umac_reset(struct bcmgenet_priv *priv)
+{
+	u32 reg;
+
+	reg = bcmgenet_rbuf_ctrl_get(priv);
+	reg |= BIT(1);
+	bcmgenet_rbuf_ctrl_set(priv, reg);
+	udelay(10);
+
+	reg &= ~BIT(1);
+	bcmgenet_rbuf_ctrl_set(priv, reg);
+	udelay(10);
+}
+
+static void bcmgenet_set_hw_addr(struct bcmgenet_priv *priv,
+				  unsigned char *addr)
+{
+	bcmgenet_umac_writel(priv, (addr[0] << 24) | (addr[1] << 16) |
+			(addr[2] << 8) | addr[3], UMAC_MAC0);
+	bcmgenet_umac_writel(priv, (addr[4] << 8) | addr[5], UMAC_MAC1);
+}
+
+static int bcmgenet_wol_resume(struct bcmgenet_priv *priv)
+{
+	int ret;
+
+	/* From WOL-enabled suspend, switch to regular clock */
+	clk_disable(priv->clk_wol);
+	/* init umac registers to synchronize s/w with h/w */
+	ret = init_umac(priv);
+	if (ret)
+		return ret;
+
+	if (priv->phydev)
+		phy_init_hw(priv->phydev);
+	/* Speed settings must be restored */
+	bcmgenet_mii_config(priv->dev);
+
+	return 0;
+}
+
+/* Returns a reusable dma control register value */
+static u32 bcmgenet_dma_disable(struct bcmgenet_priv *priv)
+{
+	u32 reg;
+	u32 dma_ctrl;
+
+	/* disable DMA */
+	dma_ctrl = 1 << (DESC_INDEX + DMA_RING_BUF_EN_SHIFT) | DMA_EN;
+	reg = bcmgenet_tdma_readl(priv, DMA_CTRL);
+	reg &= ~dma_ctrl;
+	bcmgenet_tdma_writel(priv, reg, DMA_CTRL);
+
+	reg = bcmgenet_rdma_readl(priv, DMA_CTRL);
+	reg &= ~dma_ctrl;
+	bcmgenet_rdma_writel(priv, reg, DMA_CTRL);
+
+	bcmgenet_umac_writel(priv, 1, UMAC_TX_FLUSH);
+	udelay(10);
+	bcmgenet_umac_writel(priv, 0, UMAC_TX_FLUSH);
+
+	return dma_ctrl;
+}
+
+static void bcmgenet_enable_dma(struct bcmgenet_priv *priv, u32 dma_ctrl)
+{
+	u32 reg;
+
+	reg = bcmgenet_rdma_readl(priv, DMA_CTRL);
+	reg |= dma_ctrl;
+	bcmgenet_rdma_writel(priv, reg, DMA_CTRL);
+
+	reg = bcmgenet_tdma_readl(priv, DMA_CTRL);
+	reg |= dma_ctrl;
+	bcmgenet_tdma_writel(priv, reg, DMA_CTRL);
+}
+
+static int bcmgenet_open(struct net_device *dev)
+{
+	struct bcmgenet_priv *priv = netdev_priv(dev);
+	unsigned long dma_ctrl;
+	u32 reg;
+	int ret;
+
+	netif_dbg(priv, ifup, dev, "bcmgenet_open\n");
+
+	/* Turn on the clock */
+	if (!IS_ERR(priv->clk))
+		clk_prepare_enable(priv->clk);
+
+	/* take MAC out of reset */
+	bcmgenet_umac_reset(priv);
+
+	ret = init_umac(priv);
+	if (ret)
+		goto err_clk_disable;
+
+	/* disable ethernet MAC while updating its registers */
+	reg = bcmgenet_umac_readl(priv, UMAC_CMD);
+	reg &= ~(CMD_TX_EN | CMD_RX_EN);
+	bcmgenet_umac_writel(priv, reg, UMAC_CMD);
+
+	bcmgenet_set_hw_addr(priv, dev->dev_addr);
+
+	if (priv->wol_enabled) {
+		ret = bcmgenet_wol_resume(priv);
+		if (ret)
+			return ret;
+	}
+
+	if (phy_is_internal(priv->phydev)) {
+		reg = bcmgenet_ext_readl(priv, EXT_EXT_PWR_MGMT);
+		reg |= EXT_ENERGY_DET_MASK;
+		bcmgenet_ext_writel(priv, reg, EXT_EXT_PWR_MGMT);
+	}
+
+	/* Disable RX/TX DMA and flush TX queues */
+	dma_ctrl = bcmgenet_dma_disable(priv);
+
+	/* Reinitialize TDMA and RDMA and SW housekeeping */
+	ret = bcmgenet_init_dma(priv);
+	if (ret) {
+		netdev_err(dev, "failed to initialize DMA\n");
+		goto err_fini_dma;
+	}
+
+	/* Always enable ring 16 - descriptor ring */
+	bcmgenet_enable_dma(priv, dma_ctrl);
+
+	ret = request_irq(priv->irq0, bcmgenet_isr0, IRQF_SHARED,
+			dev->name, priv);
+	if (ret < 0) {
+		netdev_err(dev, "can't request IRQ %d\n", priv->irq0);
+		goto err_fini_dma;
+	}
+
+	ret = request_irq(priv->irq1, bcmgenet_isr1, IRQF_SHARED,
+				dev->name, priv);
+	if (ret < 0) {
+		netdev_err(dev, "can't request IRQ %d\n", priv->irq1);
+		goto err_irq0;
+	}
+
+	/* Start the network engine */
+	napi_enable(&priv->napi);
+
+	reg = bcmgenet_umac_readl(priv, UMAC_CMD);
+	reg |= (CMD_TX_EN | CMD_RX_EN);
+	bcmgenet_umac_writel(priv, reg, UMAC_CMD);
+
+	/* Make sure we reflect the value of CRC_CMD_FWD */
+	priv->crc_fwd_en = !!(reg & CMD_CRC_FWD);
+
+	device_set_wakeup_capable(&dev->dev, 1);
+
+	if (phy_is_internal(priv->phydev))
+		bcmgenet_power_up(priv, GENET_POWER_PASSIVE);
+
+	netif_tx_start_all_queues(dev);
+
+	if (priv->phydev)
+		phy_start(priv->phydev);
+
+	return 0;
+
+err_irq0:
+	free_irq(priv->irq0, dev);
+err_fini_dma:
+	bcmgenet_fini_dma(priv);
+err_clk_disable:
+	if (!IS_ERR(priv->clk))
+		clk_disable_unprepare(priv->clk);
+	return ret;
+}
+
+static int bcmgenet_dma_teardown(struct bcmgenet_priv *priv)
+{
+	int ret = 0;
+	int timeout = 0;
+	u32 reg;
+
+	/* Disable TDMA to stop add more frames in TX DMA */
+	reg = bcmgenet_tdma_readl(priv, DMA_CTRL);
+	reg &= ~DMA_EN;
+	bcmgenet_tdma_writel(priv, reg, DMA_CTRL);
+
+	/* Check TDMA status register to confirm TDMA is disabled */
+	while (timeout++ < DMA_TIMEOUT_VAL) {
+		reg = bcmgenet_tdma_readl(priv, DMA_STATUS);
+		if (reg & DMA_DISABLED)
+			break;
+
+		udelay(1);
+	}
+
+	if (timeout == DMA_TIMEOUT_VAL) {
+		netdev_warn(priv->dev,
+			"Timed out while disabling TX DMA\n");
+		ret = -ETIMEDOUT;
+	}
+
+	/* Wait 10ms for packet drain in both tx and rx dma */
+	usleep_range(10000, 20000);
+
+	/* Disable RDMA */
+	reg = bcmgenet_rdma_readl(priv, DMA_CTRL);
+	reg &= ~DMA_EN;
+	bcmgenet_rdma_writel(priv, reg, DMA_CTRL);
+
+	timeout = 0;
+	/* Check RDMA status register to confirm RDMA is disabled */
+	while (timeout++ < DMA_TIMEOUT_VAL) {
+		reg = bcmgenet_rdma_readl(priv, DMA_STATUS);
+		if (reg & DMA_DISABLED)
+			break;
+
+		udelay(1);
+	}
+
+	if (timeout == DMA_TIMEOUT_VAL) {
+		netdev_warn(priv->dev,
+			"Timed out while disabling RX DMA\n");
+			ret = -ETIMEDOUT;
+	}
+
+	return ret;
+}
+
+static int bcmgenet_close(struct net_device *dev)
+{
+	struct bcmgenet_priv *priv = netdev_priv(dev);
+	int ret;
+	u32 reg;
+
+	netif_dbg(priv, ifdown, dev, "bcmgenet_close\n");
+
+	if (priv->phydev)
+		phy_stop(priv->phydev);
+
+	/* Disable MAC receive */
+	reg = bcmgenet_umac_readl(priv, UMAC_CMD);
+	reg &= ~CMD_RX_EN;
+	bcmgenet_umac_writel(priv, reg, UMAC_CMD);
+
+	netif_tx_stop_all_queues(dev);
+
+	ret = bcmgenet_dma_teardown(priv);
+	if (ret)
+		return ret;
+
+	/* Disable MAC transmit. TX DMA disabled have to done before this */
+	reg = bcmgenet_umac_readl(priv, UMAC_CMD);
+	reg &= ~CMD_TX_EN;
+	bcmgenet_umac_writel(priv, reg, UMAC_CMD);
+
+	napi_disable(&priv->napi);
+
+	/* tx reclaim */
+	bcmgenet_tx_reclaim_all(dev);
+	bcmgenet_fini_dma(priv);
+
+	free_irq(priv->irq0, priv);
+	free_irq(priv->irq1, priv);
+
+	/* Wait for pending work items to complete - we are stopping
+	 * the clock now. Since interrupts are disabled, no new work
+	 * will be scheduled.
+	 */
+	cancel_work_sync(&priv->bcmgenet_irq_work);
+
+	if (phy_is_internal(priv->phydev))
+		bcmgenet_power_down(priv, GENET_POWER_PASSIVE);
+
+	if (priv->wol_enabled)
+		clk_enable(priv->clk_wol);
+
+	if (!IS_ERR(priv->clk))
+		clk_disable_unprepare(priv->clk);
+
+	return 0;
+}
+
+static void bcmgenet_timeout(struct net_device *dev)
+{
+	struct bcmgenet_priv *priv = netdev_priv(dev);
+
+	netif_dbg(priv, tx_err, dev, "bcmgenet_timeout\n");
+
+	dev->trans_start = jiffies;
+
+	dev->stats.tx_errors++;
+
+	netif_tx_wake_all_queues(dev);
+}
+
+#define MAX_MC_COUNT	16
+
+static inline void bcmgenet_set_mdf_addr(struct bcmgenet_priv *priv,
+					 unsigned char *addr,
+					 int *i,
+					 int *mc)
+{
+	u32 reg;
+
+	bcmgenet_umac_writel(priv,
+			addr[0] << 8 | addr[1], UMAC_MDF_ADDR + (*i * 4));
+	bcmgenet_umac_writel(priv,
+			addr[2] << 24 | addr[3] << 16 |
+			addr[4] << 8 | addr[5],
+			UMAC_MDF_ADDR + ((*i + 1) * 4));
+	reg = bcmgenet_umac_readl(priv, UMAC_MDF_CTRL);
+	reg |= (1 << (MAX_MC_COUNT - *mc));
+	bcmgenet_umac_writel(priv, reg, UMAC_MDF_CTRL);
+	*i += 2;
+	(*mc)++;
+}
+
+static void bcmgenet_set_rx_mode(struct net_device *dev)
+{
+	struct bcmgenet_priv *priv = netdev_priv(dev);
+	struct netdev_hw_addr *ha;
+	int i, mc;
+	u32 reg;
+
+	netif_dbg(priv, hw, dev, "%s: %08X\n", __func__, dev->flags);
+
+	/* Promiscous mode */
+	reg = bcmgenet_umac_readl(priv, UMAC_CMD);
+	if (dev->flags & IFF_PROMISC) {
+		reg |= CMD_PROMISC;
+		bcmgenet_umac_writel(priv, reg, UMAC_CMD);
+		bcmgenet_umac_writel(priv, 0, UMAC_MDF_CTRL);
+		return;
+	} else {
+		reg &= ~CMD_PROMISC;
+		bcmgenet_umac_writel(priv, reg, UMAC_CMD);
+	}
+
+	/* UniMac doesn't support ALLMULTI */
+	if (dev->flags & IFF_ALLMULTI) {
+		netdev_warn(dev, "ALLMULTI is not supported\n");
+		return;
+	}
+
+	/* update MDF filter */
+	i = 0;
+	mc = 0;
+	/* Broadcast */
+	bcmgenet_set_mdf_addr(priv, dev->broadcast, &i, &mc);
+	/* my own address.*/
+	bcmgenet_set_mdf_addr(priv, dev->dev_addr, &i, &mc);
+	/* Unicast list*/
+	if (netdev_uc_count(dev) > (MAX_MC_COUNT - mc))
+		return;
+
+	if (!netdev_uc_empty(dev))
+		netdev_for_each_uc_addr(ha, dev)
+			bcmgenet_set_mdf_addr(priv, ha->addr, &i, &mc);
+	/* Multicast */
+	if (netdev_mc_empty(dev) || netdev_mc_count(dev) >= (MAX_MC_COUNT - mc))
+		return;
+
+	netdev_for_each_mc_addr(ha, dev)
+		bcmgenet_set_mdf_addr(priv, ha->addr, &i, &mc);
+}
+
+/* Set the hardware MAC address. */
+static int bcmgenet_set_mac_addr(struct net_device *dev, void *p)
+{
+	struct sockaddr *addr = p;
+
+	/* Setting the MAC address at the hardware level is not possible
+	 * without disabling the UniMAC RX/TX enable bits.
+	 */
+	if (netif_running(dev))
+		return -EBUSY;
+
+	ether_addr_copy(dev->dev_addr, addr->sa_data);
+
+	return 0;
+}
+
+static u16 bcmgenet_select_queue(struct net_device *dev,
+		struct sk_buff *skb, void *accel_priv)
+{
+	return netif_is_multiqueue(dev) ? skb->queue_mapping : 0;
+}
+
+static const struct net_device_ops bcmgenet_netdev_ops = {
+	.ndo_open		= bcmgenet_open,
+	.ndo_stop		= bcmgenet_close,
+	.ndo_start_xmit		= bcmgenet_xmit,
+	.ndo_select_queue	= bcmgenet_select_queue,
+	.ndo_tx_timeout		= bcmgenet_timeout,
+	.ndo_set_rx_mode	= bcmgenet_set_rx_mode,
+	.ndo_set_mac_address	= bcmgenet_set_mac_addr,
+	.ndo_do_ioctl		= bcmgenet_ioctl,
+	.ndo_set_features	= bcmgenet_set_features,
+};
+
+/* Array of GENET hardware parameters/characteristics */
+static struct bcmgenet_hw_params bcmgenet_hw_params[] = {
+	[GENET_V1] = {
+		.tx_queues = 0,
+		.rx_queues = 0,
+		.bds_cnt = 0,
+		.bp_in_en_shift = 16,
+		.bp_in_mask = 0xffff,
+		.hfb_filter_cnt = 16,
+		.qtag_mask = 0x1F,
+		.hfb_offset = 0x1000,
+		.rdma_offset = 0x2000,
+		.tdma_offset = 0x3000,
+		.words_per_bd = 2,
+	},
+	[GENET_V2] = {
+		.tx_queues = 4,
+		.rx_queues = 4,
+		.bds_cnt = 32,
+		.bp_in_en_shift = 16,
+		.bp_in_mask = 0xffff,
+		.hfb_filter_cnt = 16,
+		.qtag_mask = 0x1F,
+		.tbuf_offset = 0x0600,
+		.hfb_offset = 0x1000,
+		.hfb_reg_offset = 0x2000,
+		.rdma_offset = 0x3000,
+		.tdma_offset = 0x4000,
+		.words_per_bd = 2,
+		.flags = GENET_HAS_EXT,
+	},
+	[GENET_V3] = {
+		.tx_queues = 4,
+		.rx_queues = 4,
+		.bds_cnt = 32,
+		.bp_in_en_shift = 17,
+		.bp_in_mask = 0x1ffff,
+		.hfb_filter_cnt = 48,
+		.qtag_mask = 0x3F,
+		.tbuf_offset = 0x0600,
+		.hfb_offset = 0x8000,
+		.hfb_reg_offset = 0xfc00,
+		.rdma_offset = 0x10000,
+		.tdma_offset = 0x11000,
+		.words_per_bd = 2,
+		.flags = GENET_HAS_EXT | GENET_HAS_MDIO_INTR,
+	},
+	[GENET_V4] = {
+		.tx_queues = 4,
+		.rx_queues = 4,
+		.bds_cnt = 32,
+		.bp_in_en_shift = 17,
+		.bp_in_mask = 0x1ffff,
+		.hfb_filter_cnt = 48,
+		.qtag_mask = 0x3F,
+		.tbuf_offset = 0x0600,
+		.hfb_offset = 0x8000,
+		.hfb_reg_offset = 0xfc00,
+		.rdma_offset = 0x2000,
+		.tdma_offset = 0x4000,
+		.words_per_bd = 3,
+		.flags = GENET_HAS_40BITS | GENET_HAS_EXT | GENET_HAS_MDIO_INTR,
+	},
+};
+
+/* Infer hardware parameters from the detected GENET version */
+static void bcmgenet_set_hw_params(struct bcmgenet_priv *priv)
+{
+	struct bcmgenet_hw_params *params;
+	u32 reg;
+	u8 major;
+
+	if (GENET_IS_V4(priv)) {
+		bcmgenet_dma_regs = bcmgenet_dma_regs_v3plus;
+		genet_dma_ring_regs = genet_dma_ring_regs_v4;
+		priv->dma_rx_chk_bit = DMA_RX_CHK_V3PLUS;
+		priv->version = GENET_V4;
+	} else if (GENET_IS_V3(priv)) {
+		bcmgenet_dma_regs = bcmgenet_dma_regs_v3plus;
+		genet_dma_ring_regs = genet_dma_ring_regs_v123;
+		priv->dma_rx_chk_bit = DMA_RX_CHK_V3PLUS;
+		priv->version = GENET_V3;
+	} else if (GENET_IS_V2(priv)) {
+		bcmgenet_dma_regs = bcmgenet_dma_regs_v2;
+		genet_dma_ring_regs = genet_dma_ring_regs_v123;
+		priv->dma_rx_chk_bit = DMA_RX_CHK_V12;
+		priv->version = GENET_V2;
+	} else if (GENET_IS_V1(priv)) {
+		bcmgenet_dma_regs = bcmgenet_dma_regs_v1;
+		genet_dma_ring_regs = genet_dma_ring_regs_v123;
+		priv->dma_rx_chk_bit = DMA_RX_CHK_V12;
+		priv->version = GENET_V1;
+	}
+
+	/* enum genet_version starts at 1 */
+	priv->hw_params = &bcmgenet_hw_params[priv->version];
+	params = priv->hw_params;
+
+	/* Read GENET HW version */
+	reg = bcmgenet_sys_readl(priv, SYS_REV_CTRL);
+	major = (reg >> 24 & 0x0f);
+	if (major == 5)
+		major = 4;
+	else if (major == 0)
+		major = 1;
+	if (major != priv->version) {
+		dev_err(&priv->pdev->dev,
+			"GENET version mismatch, got: %d, configured for: %d\n",
+			major, priv->version);
+	}
+
+	/* Print the GENET core version */
+	dev_info(&priv->pdev->dev, "GENET " GENET_VER_FMT,
+		major, (reg >> 16) & 0x0f, reg & 0xffff);
+
+#ifdef CONFIG_PHYS_ADDR_T_64BIT
+	if (!(params->flags & GENET_HAS_40BITS))
+		pr_warn("GENET does not support 40-bits PA\n");
+#endif
+
+	pr_debug("Configuration for version: %d\n"
+		"TXq: %1d, RXq: %1d, BDs: %1d\n"
+		"BP << en: %2d, BP msk: 0x%05x\n"
+		"HFB count: %2d, QTAQ msk: 0x%05x\n"
+		"TBUF: 0x%04x, HFB: 0x%04x, HFBreg: 0x%04x\n"
+		"RDMA: 0x%05x, TDMA: 0x%05x\n"
+		"Words/BD: %d\n",
+		priv->version,
+		params->tx_queues, params->rx_queues, params->bds_cnt,
+		params->bp_in_en_shift, params->bp_in_mask,
+		params->hfb_filter_cnt, params->qtag_mask,
+		params->tbuf_offset, params->hfb_offset,
+		params->hfb_reg_offset,
+		params->rdma_offset, params->tdma_offset,
+		params->words_per_bd);
+}
+
+static const struct of_device_id bcmgenet_match[] = {
+	{ .compatible = "brcm,genet-v1", .data = (void *)GENET_V1 },
+	{ .compatible = "brcm,genet-v2", .data = (void *)GENET_V2 },
+	{ .compatible = "brcm,genet-v3", .data = (void *)GENET_V3 },
+	{ .compatible = "brcm,genet-v4", .data = (void *)GENET_V4 },
+	{ },
+};
+
+static int bcmgenet_probe(struct platform_device *pdev)
+{
+	struct device_node *dn = pdev->dev.of_node;
+	const struct of_device_id *of_id;
+	struct bcmgenet_priv *priv;
+	struct net_device *dev;
+	const void *macaddr;
+	struct resource *r;
+	int err = -EIO;
+
+	/* Up to GENET_MAX_MQ_CNT + 1 TX queues and a single RX queue */
+	dev = alloc_etherdev_mqs(sizeof(*priv), GENET_MAX_MQ_CNT + 1, 1);
+	if (!dev) {
+		dev_err(&pdev->dev, "can't allocate net device\n");
+		return -ENOMEM;
+	}
+
+	of_id = of_match_node(bcmgenet_match, dn);
+	if (!of_id)
+		return -EINVAL;
+
+	priv = netdev_priv(dev);
+	priv->irq0 = platform_get_irq(pdev, 0);
+	priv->irq1 = platform_get_irq(pdev, 1);
+	if (!priv->irq0 || !priv->irq1) {
+		dev_err(&pdev->dev, "can't find IRQs\n");
+		err = -EINVAL;
+		goto err;
+	}
+
+	macaddr = of_get_mac_address(dn);
+	if (!macaddr) {
+		dev_err(&pdev->dev, "can't find MAC address\n");
+		err = -EINVAL;
+		goto err;
+	}
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->base = devm_request_and_ioremap(&pdev->dev, r);
+	if (!priv->base) {
+		dev_err(&pdev->dev, "can't ioremap\n");
+		err = -EINVAL;
+		goto err;
+	}
+
+	SET_NETDEV_DEV(dev, &pdev->dev);
+	dev_set_drvdata(&pdev->dev, dev);
+	ether_addr_copy(dev->dev_addr, macaddr);
+	dev->watchdog_timeo = 2 * HZ;
+	SET_ETHTOOL_OPS(dev, &bcmgenet_ethtool_ops);
+	dev->netdev_ops = &bcmgenet_netdev_ops;
+	netif_napi_add(dev, &priv->napi, bcmgenet_poll, 64);
+
+	priv->msg_enable = netif_msg_init(-1, GENET_MSG_DEFAULT);
+
+	/* Set hardware features */
+	dev->hw_features |= NETIF_F_SG | NETIF_F_IP_CSUM |
+		NETIF_F_IPV6_CSUM | NETIF_F_RXCSUM;
+
+	/* Set the needed headroom to account for any possible
+	 * features enabling/disabling at runtime
+	 */
+	dev->needed_headroom += 64;
+
+	netdev_boot_setup_check(dev);
+
+	priv->dev = dev;
+	priv->pdev = pdev;
+	priv->version = (enum bcmgenet_version)of_id->data;
+
+	bcmgenet_set_hw_params(priv);
+
+	spin_lock_init(&priv->lock);
+	/* Mii wait queue */
+	init_waitqueue_head(&priv->wq);
+	/* Always use RX_BUF_LENGTH (2KB) buffer for all chips */
+	priv->rx_buf_len = RX_BUF_LENGTH;
+	INIT_WORK(&priv->bcmgenet_irq_work, bcmgenet_irq_task);
+
+	priv->clk = devm_clk_get(&priv->pdev->dev, "enet");
+	if (IS_ERR(priv->clk))
+		dev_warn(&priv->pdev->dev, "failed to get enet clock\n");
+
+	priv->clk_wol = devm_clk_get(&priv->pdev->dev, "enet-wol");
+	if (IS_ERR(priv->clk_wol))
+		dev_warn(&priv->pdev->dev, "failed to get enet-wol clock\n");
+
+	if (!IS_ERR(priv->clk))
+		clk_prepare_enable(priv->clk);
+
+	err = reset_umac(priv);
+	if (err)
+		goto err_clk_disable;
+
+	err = bcmgenet_mii_init(dev);
+	if (err)
+		goto err_clk_disable;
+
+	/* setup number of real queues  + 1 (GENET_V1 has 0 hardware queues
+	 * just the ring 16 descriptor based TX
+	 */
+	netif_set_real_num_tx_queues(priv->dev, priv->hw_params->tx_queues + 1);
+	netif_set_real_num_rx_queues(priv->dev, priv->hw_params->rx_queues + 1);
+
+	err = register_netdev(dev);
+	if (err)
+		goto err_clk_disable;
+
+	/* Turn off the main clock, WOL clock is handled separately */
+	if (!IS_ERR(priv->clk))
+		clk_disable_unprepare(priv->clk);
+
+	return err;
+
+err_clk_disable:
+	if (!IS_ERR(priv->clk))
+		clk_disable_unprepare(priv->clk);
+err:
+	free_netdev(dev);
+	return err;
+}
+
+static int bcmgenet_remove(struct platform_device *pdev)
+{
+	struct bcmgenet_priv *priv = dev_to_priv(&pdev->dev);
+
+	dev_set_drvdata(&pdev->dev, NULL);
+	unregister_netdev(priv->dev);
+	bcmgenet_mii_exit(priv->dev);
+	free_netdev(priv->dev);
+
+	return 0;
+}
+
+
+static struct platform_driver bcmgenet_driver = {
+	.probe	= bcmgenet_probe,
+	.remove	= bcmgenet_remove,
+	.driver	= {
+		.name	= "bcmgenet",
+		.owner	= THIS_MODULE,
+		.of_match_table = bcmgenet_match,
+	},
+};
+module_platform_driver(bcmgenet_driver);
+
+MODULE_AUTHOR("Broadcom Corporation");
+MODULE_DESCRIPTION("Broadcom GENET Ethernet controller driver");
+MODULE_ALIAS("platform:bcmgenet");
+MODULE_LICENSE("GPL");
-- 
cgit v1.2.2


From aa09677cba423b894bde434e523991eab83895ec Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Thu, 13 Feb 2014 16:08:48 -0800
Subject: net: bcmgenet: add MDIO routines

This patch adds support for configuring the port multiplexer hardware
which resides in front of the GENET Ethernet MAC controller. This allows
us to support:

- internal PHYs (using drivers/net/phy/bcm7xxx.c)
- MoCA PHYs which are an entirely separate hardware block not covered
  here
- external PHYs and switches

Note that MoCA and switches are currently supported using the emulated
"fixed PHY" driver.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/genet/bcmmii.c | 464 +++++++++++++++++++++++++++
 1 file changed, 464 insertions(+)
 create mode 100644 drivers/net/ethernet/broadcom/genet/bcmmii.c

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c
new file mode 100644
index 000000000000..4608673beaff
--- /dev/null
+++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c
@@ -0,0 +1,464 @@
+/*
+ * Broadcom GENET MDIO routines
+ *
+ * Copyright (c) 2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/wait.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/bitops.h>
+#include <linux/netdevice.h>
+#include <linux/platform_device.h>
+#include <linux/phy.h>
+#include <linux/phy_fixed.h>
+#include <linux/brcmphy.h>
+#include <linux/of.h>
+#include <linux/of_net.h>
+#include <linux/of_mdio.h>
+
+#include "bcmgenet.h"
+
+/* read a value from the MII */
+static int bcmgenet_mii_read(struct mii_bus *bus, int phy_id, int location)
+{
+	int ret;
+	struct net_device *dev = bus->priv;
+	struct bcmgenet_priv *priv = netdev_priv(dev);
+	u32 reg;
+
+	bcmgenet_umac_writel(priv, (MDIO_RD | (phy_id << MDIO_PMD_SHIFT) |
+			(location << MDIO_REG_SHIFT)), UMAC_MDIO_CMD);
+	/* Start MDIO transaction*/
+	reg = bcmgenet_umac_readl(priv, UMAC_MDIO_CMD);
+	reg |= MDIO_START_BUSY;
+	bcmgenet_umac_writel(priv, reg, UMAC_MDIO_CMD);
+	wait_event_timeout(priv->wq,
+			!(bcmgenet_umac_readl(priv, UMAC_MDIO_CMD)
+				& MDIO_START_BUSY),
+			HZ / 100);
+	ret = bcmgenet_umac_readl(priv, UMAC_MDIO_CMD);
+
+	if (ret & MDIO_READ_FAIL)
+		return -EIO;
+
+	return ret & 0xffff;
+}
+
+/* write a value to the MII */
+static int bcmgenet_mii_write(struct mii_bus *bus, int phy_id,
+			int location, u16 val)
+{
+	struct net_device *dev = bus->priv;
+	struct bcmgenet_priv *priv = netdev_priv(dev);
+	u32 reg;
+
+	bcmgenet_umac_writel(priv, (MDIO_WR | (phy_id << MDIO_PMD_SHIFT) |
+			(location << MDIO_REG_SHIFT) | (0xffff & val)),
+			UMAC_MDIO_CMD);
+	reg = bcmgenet_umac_readl(priv, UMAC_MDIO_CMD);
+	reg |= MDIO_START_BUSY;
+	bcmgenet_umac_writel(priv, reg, UMAC_MDIO_CMD);
+	wait_event_timeout(priv->wq,
+			!(bcmgenet_umac_readl(priv, UMAC_MDIO_CMD) &
+				MDIO_START_BUSY),
+			HZ / 100);
+
+	return 0;
+}
+
+/* setup netdev link state when PHY link status change and
+ * update UMAC and RGMII block when link up
+ */
+static void bcmgenet_mii_setup(struct net_device *dev)
+{
+	struct bcmgenet_priv *priv = netdev_priv(dev);
+	struct phy_device *phydev = priv->phydev;
+	u32 reg, cmd_bits = 0;
+	unsigned int status_changed = 0;
+
+	if (priv->old_link != phydev->link) {
+		status_changed = 1;
+		priv->old_link = phydev->link;
+	}
+
+	if (phydev->link) {
+		/* program UMAC and RGMII block based on established link
+		 * speed, pause, and duplex.
+		 * the speed set in umac->cmd tell RGMII block which clock
+		 * 25MHz(100Mbps)/125MHz(1Gbps) to use for transmit.
+		 * receive clock is provided by PHY.
+		 */
+		reg = bcmgenet_ext_readl(priv, EXT_RGMII_OOB_CTRL);
+		reg &= ~OOB_DISABLE;
+		reg |= RGMII_LINK;
+		bcmgenet_ext_writel(priv, reg, EXT_RGMII_OOB_CTRL);
+
+		/* speed */
+		if (phydev->speed == SPEED_1000)
+			cmd_bits = UMAC_SPEED_1000;
+		else if (phydev->speed == SPEED_100)
+			cmd_bits = UMAC_SPEED_100;
+		else
+			cmd_bits = UMAC_SPEED_10;
+		cmd_bits <<= CMD_SPEED_SHIFT;
+
+		if (priv->old_duplex != phydev->duplex) {
+			status_changed = 1;
+			priv->old_duplex = phydev->duplex;
+		}
+
+		/* duplex */
+		if (phydev->duplex != DUPLEX_FULL)
+			cmd_bits |= CMD_HD_EN;
+
+		if (priv->old_pause != phydev->pause) {
+			status_changed = 1;
+			priv->old_pause = phydev->pause;
+		}
+
+		/* pause capability */
+		if (!phydev->pause)
+			cmd_bits |= CMD_RX_PAUSE_IGNORE | CMD_TX_PAUSE_IGNORE;
+
+		reg = bcmgenet_umac_readl(priv, UMAC_CMD);
+		reg &= ~((CMD_SPEED_MASK << CMD_SPEED_SHIFT) |
+			       CMD_HD_EN |
+			       CMD_RX_PAUSE_IGNORE | CMD_TX_PAUSE_IGNORE);
+		reg |= cmd_bits;
+		bcmgenet_umac_writel(priv, reg, UMAC_CMD);
+	}
+
+	if (status_changed)
+		phy_print_status(phydev);
+}
+
+void bcmgenet_mii_reset(struct net_device *dev)
+{
+	struct bcmgenet_priv *priv = netdev_priv(dev);
+
+	if (priv->phydev) {
+		phy_init_hw(priv->phydev);
+		phy_start_aneg(priv->phydev);
+	}
+}
+
+static void bcmgenet_ephy_power_up(struct net_device *dev)
+{
+	struct bcmgenet_priv *priv = netdev_priv(dev);
+	u32 reg = 0;
+
+	/* EXT_GPHY_CTRL is only valid for GENETv4 and onward */
+	if (!GENET_IS_V4(priv))
+		return;
+
+	reg = bcmgenet_ext_readl(priv, EXT_GPHY_CTRL);
+	reg &= ~(EXT_CFG_IDDQ_BIAS | EXT_CFG_PWR_DOWN);
+	reg |= EXT_GPHY_RESET;
+	bcmgenet_ext_writel(priv, reg, EXT_GPHY_CTRL);
+	mdelay(2);
+
+	reg &= ~EXT_GPHY_RESET;
+	bcmgenet_ext_writel(priv, reg, EXT_GPHY_CTRL);
+	udelay(20);
+}
+
+static void bcmgenet_internal_phy_setup(struct net_device *dev)
+{
+	struct bcmgenet_priv *priv = netdev_priv(dev);
+	u32 reg;
+
+	/* Power up EPHY */
+	bcmgenet_ephy_power_up(dev);
+	/* enable APD */
+	reg = bcmgenet_ext_readl(priv, EXT_EXT_PWR_MGMT);
+	reg |= EXT_PWR_DN_EN_LD;
+	bcmgenet_ext_writel(priv, reg, EXT_EXT_PWR_MGMT);
+	bcmgenet_mii_reset(dev);
+}
+
+static void bcmgenet_moca_phy_setup(struct bcmgenet_priv *priv)
+{
+	u32 reg;
+
+	/* Speed settings are set in bcmgenet_mii_setup() */
+	reg = bcmgenet_sys_readl(priv, SYS_PORT_CTRL);
+	reg |= LED_ACT_SOURCE_MAC;
+	bcmgenet_sys_writel(priv, reg, SYS_PORT_CTRL);
+}
+
+int bcmgenet_mii_config(struct net_device *dev)
+{
+	struct bcmgenet_priv *priv = netdev_priv(dev);
+	struct phy_device *phydev = priv->phydev;
+	struct device *kdev = &priv->pdev->dev;
+	const char *phy_name = NULL;
+	u32 id_mode_dis = 0;
+	u32 port_ctrl;
+	u32 reg;
+
+	priv->ext_phy = !phy_is_internal(priv->phydev) &&
+			(priv->phy_interface != PHY_INTERFACE_MODE_MOCA);
+
+	if (phy_is_internal(priv->phydev))
+		priv->phy_interface = PHY_INTERFACE_MODE_NA;
+
+	switch (priv->phy_interface) {
+	case PHY_INTERFACE_MODE_NA:
+	case PHY_INTERFACE_MODE_MOCA:
+		/* Irrespective of the actually configured PHY speed (100 or
+		 * 1000) GENETv4 only has an internal GPHY so we will just end
+		 * up masking the Gigabit features from what we support, not
+		 * switching to the EPHY
+		 */
+		if (GENET_IS_V4(priv))
+			port_ctrl = PORT_MODE_INT_GPHY;
+		else
+			port_ctrl = PORT_MODE_INT_EPHY;
+
+		bcmgenet_sys_writel(priv, port_ctrl, SYS_PORT_CTRL);
+
+		if (phy_is_internal(priv->phydev)) {
+			phy_name = "internal PHY";
+			bcmgenet_internal_phy_setup(dev);
+		} else if (priv->phy_interface == PHY_INTERFACE_MODE_MOCA) {
+			phy_name = "MoCA";
+			bcmgenet_moca_phy_setup(priv);
+		}
+		break;
+
+	case PHY_INTERFACE_MODE_MII:
+		phy_name = "external MII";
+		phydev->supported &= PHY_BASIC_FEATURES;
+		bcmgenet_sys_writel(priv,
+				PORT_MODE_EXT_EPHY, SYS_PORT_CTRL);
+		break;
+
+	case PHY_INTERFACE_MODE_REVMII:
+		phy_name = "external RvMII";
+		/* of_mdiobus_register took care of reading the 'max-speed'
+		 * PHY property for us, effectively limiting the PHY supported
+		 * capabilities, use that knowledge to also configure the
+		 * Reverse MII interface correctly.
+		 */
+		if ((priv->phydev->supported & PHY_BASIC_FEATURES) ==
+				PHY_BASIC_FEATURES)
+			port_ctrl = PORT_MODE_EXT_RVMII_25;
+		else
+			port_ctrl = PORT_MODE_EXT_RVMII_50;
+		bcmgenet_sys_writel(priv, port_ctrl, SYS_PORT_CTRL);
+		break;
+
+	case PHY_INTERFACE_MODE_RGMII:
+		/* RGMII_NO_ID: TXC transitions at the same time as TXD
+		 *		(requires PCB or receiver-side delay)
+		 * RGMII:	Add 2ns delay on TXC (90 degree shift)
+		 *
+		 * ID is implicitly disabled for 100Mbps (RG)MII operation.
+		 */
+		id_mode_dis = BIT(16);
+		/* fall through */
+	case PHY_INTERFACE_MODE_RGMII_TXID:
+		if (id_mode_dis)
+			phy_name = "external RGMII (no delay)";
+		else
+			phy_name = "external RGMII (TX delay)";
+		reg = bcmgenet_ext_readl(priv, EXT_RGMII_OOB_CTRL);
+		reg |= RGMII_MODE_EN | id_mode_dis;
+		bcmgenet_ext_writel(priv, reg, EXT_RGMII_OOB_CTRL);
+		bcmgenet_sys_writel(priv,
+				PORT_MODE_EXT_GPHY, SYS_PORT_CTRL);
+		break;
+	default:
+		dev_err(kdev, "unknown phy mode: %d\n", priv->phy_interface);
+		return -EINVAL;
+	}
+
+	dev_info(kdev, "configuring instance for %s\n", phy_name);
+
+	return 0;
+}
+
+static int bcmgenet_mii_probe(struct net_device *dev)
+{
+	struct bcmgenet_priv *priv = netdev_priv(dev);
+	struct phy_device *phydev;
+	unsigned int phy_flags;
+	int ret;
+
+	if (priv->phydev) {
+		pr_info("PHY already attached\n");
+		return 0;
+	}
+
+	if (priv->phy_dn)
+		phydev = of_phy_connect(dev, priv->phy_dn,
+					bcmgenet_mii_setup, 0,
+					priv->phy_interface);
+	else
+		phydev = of_phy_connect_fixed_link(dev,
+					bcmgenet_mii_setup,
+					priv->phy_interface);
+
+	if (!phydev) {
+		pr_err("could not attach to PHY\n");
+		return -ENODEV;
+	}
+
+	priv->old_link = -1;
+	priv->old_duplex = -1;
+	priv->old_pause = -1;
+	priv->phydev = phydev;
+
+	/* Configure port multiplexer based on what the probed PHY device since
+	 * reading the 'max-speed' property determines the maximum supported
+	 * PHY speed which is needed for bcmgenet_mii_config() to configure
+	 * things appropriately.
+	 */
+	ret = bcmgenet_mii_config(dev);
+	if (ret) {
+		phy_disconnect(priv->phydev);
+		return ret;
+	}
+
+	phy_flags = PHY_BRCM_100MBPS_WAR;
+
+	/* workarounds are only needed for 100Mpbs PHYs, and
+	 * never on GENET V1 hardware
+	 */
+	if ((phydev->supported & PHY_GBIT_FEATURES) || GENET_IS_V1(priv))
+		phy_flags = 0;
+
+	phydev->dev_flags |= phy_flags;
+	phydev->advertising = phydev->supported;
+
+	/* The internal PHY has its link interrupts routed to the
+	 * Ethernet MAC ISRs
+	 */
+	if (phy_is_internal(priv->phydev))
+		priv->mii_bus->irq[phydev->addr] = PHY_IGNORE_INTERRUPT;
+	else
+		priv->mii_bus->irq[phydev->addr] = PHY_POLL;
+
+	pr_info("attached PHY at address %d [%s]\n",
+			phydev->addr, phydev->drv->name);
+
+	return 0;
+}
+
+static int bcmgenet_mii_alloc(struct bcmgenet_priv *priv)
+{
+	struct mii_bus *bus;
+
+	if (priv->mii_bus)
+		return 0;
+
+	priv->mii_bus = mdiobus_alloc();
+	if (!priv->mii_bus) {
+		pr_err("failed to allocate\n");
+		return -ENOMEM;
+	}
+
+	bus = priv->mii_bus;
+	bus->priv = priv->dev;
+	bus->name = "bcmgenet MII bus";
+	bus->parent = &priv->pdev->dev;
+	bus->read = bcmgenet_mii_read;
+	bus->write = bcmgenet_mii_write;
+	snprintf(bus->id, MII_BUS_ID_SIZE, "%s-%d",
+			priv->pdev->name, priv->pdev->id);
+
+	bus->irq = kzalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
+	if (!bus->irq) {
+		mdiobus_free(priv->mii_bus);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static int bcmgenet_mii_of_init(struct bcmgenet_priv *priv)
+{
+	struct device_node *dn = priv->pdev->dev.of_node;
+	struct device *kdev = &priv->pdev->dev;
+	struct device_node *mdio_dn;
+	char *compat;
+	int ret;
+
+	compat = kasprintf(GFP_KERNEL, "brcm,genet-mdio-v%d", priv->version);
+	if (!compat)
+		return -ENOMEM;
+
+	mdio_dn = of_find_compatible_node(dn, NULL, compat);
+	kfree(compat);
+	if (!mdio_dn) {
+		dev_err(kdev, "unable to find MDIO bus node\n");
+		return -ENODEV;
+	}
+
+	ret = of_mdiobus_register(priv->mii_bus, mdio_dn);
+	if (ret) {
+		dev_err(kdev, "failed to register MDIO bus\n");
+		return ret;
+	}
+
+	/* Fetch the PHY phandle */
+	priv->phy_dn = of_parse_phandle(dn, "phy-handle", 0);
+
+	/* Get the link mode */
+	priv->phy_interface = of_get_phy_mode(dn);
+
+	return 0;
+}
+
+int bcmgenet_mii_init(struct net_device *dev)
+{
+	struct bcmgenet_priv *priv = netdev_priv(dev);
+	int ret;
+
+	ret = bcmgenet_mii_alloc(priv);
+	if (ret)
+		return ret;
+
+	ret = bcmgenet_mii_of_init(priv);
+	if (ret)
+		goto out_free;
+
+	ret = bcmgenet_mii_probe(dev);
+	if (ret)
+		goto out;
+
+	return 0;
+
+out:
+	mdiobus_unregister(priv->mii_bus);
+out_free:
+	kfree(priv->mii_bus->irq);
+	mdiobus_free(priv->mii_bus);
+	return ret;
+}
+
+void bcmgenet_mii_exit(struct net_device *dev)
+{
+	struct bcmgenet_priv *priv = netdev_priv(dev);
+
+	mdiobus_unregister(priv->mii_bus);
+	kfree(priv->mii_bus->irq);
+	mdiobus_free(priv->mii_bus);
+}
-- 
cgit v1.2.2


From bdaa53bde55f21b47ec5e4aa040f38a48435aaed Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Thu, 13 Feb 2014 16:08:49 -0800
Subject: net: bcmgenet: hook into the build system

This patch adds a new configuration symbol: CONFIG_BCMGENET which allows
us to build the Broadcom GENET driver and hook the driver files into the
build system.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/Kconfig        | 11 +++++++++++
 drivers/net/ethernet/broadcom/Makefile       |  1 +
 drivers/net/ethernet/broadcom/genet/Makefile |  2 ++
 3 files changed, 14 insertions(+)
 create mode 100644 drivers/net/ethernet/broadcom/genet/Makefile

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/Kconfig b/drivers/net/ethernet/broadcom/Kconfig
index 3f97d9fd0a71..85dbddd03722 100644
--- a/drivers/net/ethernet/broadcom/Kconfig
+++ b/drivers/net/ethernet/broadcom/Kconfig
@@ -60,6 +60,17 @@ config BCM63XX_ENET
 	  This driver supports the ethernet MACs in the Broadcom 63xx
 	  MIPS chipset family (BCM63XX).
 
+config BCMGENET
+	tristate "Broadcom GENET internal MAC support"
+	depends on OF
+	select MII
+	select PHYLIB
+	select FIXED_PHY if BCMGENET=y
+	select BCM7XXX_PHY
+	help
+	  This driver supports the built-in Ethernet MACs found in the
+	  Broadcom BCM7xxx Set Top Box family chipset.
+
 config BNX2
 	tristate "Broadcom NetXtremeII support"
 	depends on PCI
diff --git a/drivers/net/ethernet/broadcom/Makefile b/drivers/net/ethernet/broadcom/Makefile
index 68efa1a3fb88..fd639a0d4c7d 100644
--- a/drivers/net/ethernet/broadcom/Makefile
+++ b/drivers/net/ethernet/broadcom/Makefile
@@ -4,6 +4,7 @@
 
 obj-$(CONFIG_B44) += b44.o
 obj-$(CONFIG_BCM63XX_ENET) += bcm63xx_enet.o
+obj-$(CONFIG_BCMGENET) += genet/
 obj-$(CONFIG_BNX2) += bnx2.o
 obj-$(CONFIG_CNIC) += cnic.o
 obj-$(CONFIG_BNX2X) += bnx2x/
diff --git a/drivers/net/ethernet/broadcom/genet/Makefile b/drivers/net/ethernet/broadcom/genet/Makefile
new file mode 100644
index 000000000000..31f55a90a197
--- /dev/null
+++ b/drivers/net/ethernet/broadcom/genet/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_BCMGENET) += genet.o
+genet-objs := bcmgenet.o bcmmii.o
-- 
cgit v1.2.2


From 2e05f01bd1839ca1a3da66be8ed7aebd36fbde77 Mon Sep 17 00:00:00 2001
From: Kalle Valo <kvalo@qca.qualcomm.com>
Date: Thu, 13 Feb 2014 18:13:12 +0200
Subject: ath10k: fix alignment in ath10k_dbg()

Fix a checkpatch warning:

drivers/net/wireless/ath/ath10k/debug.h:95: CHECK: Alignment should match open parenthesis

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/debug.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath10k/debug.h b/drivers/net/wireless/ath/ath10k/debug.h
index 1773c36c71a0..a5824990bd2a 100644
--- a/drivers/net/wireless/ath/ath10k/debug.h
+++ b/drivers/net/wireless/ath/ath10k/debug.h
@@ -92,7 +92,7 @@ static inline void ath10k_debug_read_target_stats(struct ath10k *ar,
 
 #ifdef CONFIG_ATH10K_DEBUG
 __printf(2, 3) void ath10k_dbg(enum ath10k_debug_mask mask,
-				      const char *fmt, ...);
+			       const char *fmt, ...);
 void ath10k_dbg_dump(enum ath10k_debug_mask mask,
 		     const char *msg, const char *prefix,
 		     const void *buf, size_t len);
-- 
cgit v1.2.2


From ef8c00174a8738ea334197c0164143354644cb16 Mon Sep 17 00:00:00 2001
From: Kalle Valo <kvalo@qca.qualcomm.com>
Date: Thu, 13 Feb 2014 18:13:12 +0200
Subject: ath: remove camel case from struct reg_dmn_pair_mapping

Fixes a checkpatch warning in ath10k:

drivers/net/wireless/ath/ath10k/mac.c:1636: WARNING: Avoid CamelCase: <regpair->regDmnEnum>

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath.h        |  2 +-
 drivers/net/wireless/ath/ath10k/mac.c |  6 +++---
 drivers/net/wireless/ath/ath6kl/wmi.c |  4 ++--
 drivers/net/wireless/ath/regd.c       | 10 +++++-----
 4 files changed, 11 insertions(+), 11 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath.h b/drivers/net/wireless/ath/ath.h
index b59cfbe0276b..2f4f25188cd1 100644
--- a/drivers/net/wireless/ath/ath.h
+++ b/drivers/net/wireless/ath/ath.h
@@ -63,7 +63,7 @@ enum ath_bus_type {
 };
 
 struct reg_dmn_pair_mapping {
-	u16 regDmnEnum;
+	u16 reg_domain;
 	u16 reg_5ghz_ctl;
 	u16 reg_2ghz_ctl;
 };
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 1c305b10e477..5c5860ef36bd 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -1648,9 +1648,9 @@ static void ath10k_regd_update(struct ath10k *ar)
 	/* Target allows setting up per-band regdomain but ath_common provides
 	 * a combined one only */
 	ret = ath10k_wmi_pdev_set_regdomain(ar,
-					    regpair->regDmnEnum,
-					    regpair->regDmnEnum, /* 2ghz */
-					    regpair->regDmnEnum, /* 5ghz */
+					    regpair->reg_domain,
+					    regpair->reg_domain, /* 2ghz */
+					    regpair->reg_domain, /* 5ghz */
 					    regpair->reg_2ghz_ctl,
 					    regpair->reg_5ghz_ctl);
 	if (ret)
diff --git a/drivers/net/wireless/ath/ath6kl/wmi.c b/drivers/net/wireless/ath/ath6kl/wmi.c
index 4f16d79c9eb1..8b4ce28e3ce8 100644
--- a/drivers/net/wireless/ath/ath6kl/wmi.c
+++ b/drivers/net/wireless/ath/ath6kl/wmi.c
@@ -914,7 +914,7 @@ ath6kl_get_regpair(u16 regdmn)
 		return NULL;
 
 	for (i = 0; i < ARRAY_SIZE(regDomainPairs); i++) {
-		if (regDomainPairs[i].regDmnEnum == regdmn)
+		if (regDomainPairs[i].reg_domain == regdmn)
 			return &regDomainPairs[i];
 	}
 
@@ -954,7 +954,7 @@ static void ath6kl_wmi_regdomain_event(struct wmi *wmi, u8 *datap, int len)
 		country = ath6kl_regd_find_country_by_rd((u16) reg_code);
 		if (regpair)
 			ath6kl_dbg(ATH6KL_DBG_WMI, "Regpair used: 0x%0x\n",
-				   regpair->regDmnEnum);
+				   regpair->reg_domain);
 		else
 			ath6kl_warn("Regpair not found reg_code 0x%0x\n",
 				    reg_code);
diff --git a/drivers/net/wireless/ath/regd.c b/drivers/net/wireless/ath/regd.c
index e5e905910db4..415393dfb6fc 100644
--- a/drivers/net/wireless/ath/regd.c
+++ b/drivers/net/wireless/ath/regd.c
@@ -222,7 +222,7 @@ static const struct ieee80211_regdomain *ath_default_world_regdomain(void)
 static const struct
 ieee80211_regdomain *ath_world_regdomain(struct ath_regulatory *reg)
 {
-	switch (reg->regpair->regDmnEnum) {
+	switch (reg->regpair->reg_domain) {
 	case 0x60:
 	case 0x61:
 	case 0x62:
@@ -431,7 +431,7 @@ static void ath_reg_apply_world_flags(struct wiphy *wiphy,
 				      enum nl80211_reg_initiator initiator,
 				      struct ath_regulatory *reg)
 {
-	switch (reg->regpair->regDmnEnum) {
+	switch (reg->regpair->reg_domain) {
 	case 0x60:
 	case 0x63:
 	case 0x66:
@@ -560,7 +560,7 @@ static bool ath_regd_is_eeprom_valid(struct ath_regulatory *reg)
 			printk(KERN_DEBUG "ath: EEPROM indicates we "
 			       "should expect a direct regpair map\n");
 		for (i = 0; i < ARRAY_SIZE(regDomainPairs); i++)
-			if (regDomainPairs[i].regDmnEnum == rd)
+			if (regDomainPairs[i].reg_domain == rd)
 				return true;
 	}
 	printk(KERN_DEBUG
@@ -617,7 +617,7 @@ ath_get_regpair(int regdmn)
 	if (regdmn == NO_ENUMRD)
 		return NULL;
 	for (i = 0; i < ARRAY_SIZE(regDomainPairs); i++) {
-		if (regDomainPairs[i].regDmnEnum == regdmn)
+		if (regDomainPairs[i].reg_domain == regdmn)
 			return &regDomainPairs[i];
 	}
 	return NULL;
@@ -741,7 +741,7 @@ static int __ath_regd_init(struct ath_regulatory *reg)
 	printk(KERN_DEBUG "ath: Country alpha2 being used: %c%c\n",
 		reg->alpha2[0], reg->alpha2[1]);
 	printk(KERN_DEBUG "ath: Regpair used: 0x%0x\n",
-		reg->regpair->regDmnEnum);
+		reg->regpair->reg_domain);
 
 	return 0;
 }
-- 
cgit v1.2.2


From 75459e3338928bdbe9618b626a6471764e2e53f0 Mon Sep 17 00:00:00 2001
From: Kalle Valo <kvalo@qca.qualcomm.com>
Date: Thu, 13 Feb 2014 18:13:12 +0200
Subject: ath10k: release conf_mutex if vdev_start() fails

I modified Michal's commit c930f744bdb0 ("ath10k: implement channel switching") to return
when vdev_start() fails, but forgot to release conf_mutex.

Found by coccinelle:

>> drivers/net/wireless/ath/ath10k/mac.c:2745:5-11: preceding lock on line 2663

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/mac.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 5c5860ef36bd..44b550b2fcfd 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -2785,7 +2785,7 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
 				if (ret) {
 					ath10k_warn("failed to start vdev: %d\n",
 						    ret);
-					return;
+					goto exit;
 				}
 
 				arvif->is_started = true;
@@ -2866,6 +2866,7 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
 			ath10k_bss_assoc(hw, vif, info);
 	}
 
+exit:
 	mutex_unlock(&ar->conf_mutex);
 }
 
-- 
cgit v1.2.2


From 1c213bd24ad04f4430031d20d740d7783162b099 Mon Sep 17 00:00:00 2001
From: WANG Cong <xiyou.wangcong@gmail.com>
Date: Thu, 13 Feb 2014 11:46:28 -0800
Subject: net: introduce netdev_alloc_pcpu_stats() for drivers

There are many drivers calling alloc_percpu() to allocate pcpu stats
and then initializing ->syncp. So just introduce a helper function for them.

Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/dummy.c                   |  8 +-------
 drivers/net/ethernet/marvell/mvneta.c |  9 +--------
 drivers/net/loopback.c                |  9 +--------
 drivers/net/macvlan.c                 |  9 +--------
 drivers/net/nlmon.c                   | 11 +----------
 drivers/net/team/team.c               |  8 +-------
 drivers/net/veth.c                    | 11 +----------
 drivers/net/vxlan.c                   | 10 +---------
 drivers/net/xen-netfront.c            |  8 +-------
 9 files changed, 9 insertions(+), 74 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/dummy.c b/drivers/net/dummy.c
index bd8f84b0b894..1656317c96f8 100644
--- a/drivers/net/dummy.c
+++ b/drivers/net/dummy.c
@@ -88,16 +88,10 @@ static netdev_tx_t dummy_xmit(struct sk_buff *skb, struct net_device *dev)
 
 static int dummy_dev_init(struct net_device *dev)
 {
-	int i;
-	dev->dstats = alloc_percpu(struct pcpu_dstats);
+	dev->dstats = netdev_alloc_pcpu_stats(struct pcpu_dstats);
 	if (!dev->dstats)
 		return -ENOMEM;
 
-	for_each_possible_cpu(i) {
-		struct pcpu_dstats *dstats;
-		dstats = per_cpu_ptr(dev->dstats, i);
-		u64_stats_init(&dstats->syncp);
-	}
 	return 0;
 }
 
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index f418f4f20f94..12c6a66e54d1 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -2784,7 +2784,6 @@ static int mvneta_probe(struct platform_device *pdev)
 	const char *mac_from;
 	int phy_mode;
 	int err;
-	int cpu;
 
 	/* Our multiqueue support is not complete, so for now, only
 	 * allow the usage of the first RX queue
@@ -2845,18 +2844,12 @@ static int mvneta_probe(struct platform_device *pdev)
 	}
 
 	/* Alloc per-cpu stats */
-	pp->stats = alloc_percpu(struct mvneta_pcpu_stats);
+	pp->stats = netdev_alloc_pcpu_stats(struct mvneta_pcpu_stats);
 	if (!pp->stats) {
 		err = -ENOMEM;
 		goto err_unmap;
 	}
 
-	for_each_possible_cpu(cpu) {
-		struct mvneta_pcpu_stats *stats;
-		stats = per_cpu_ptr(pp->stats, cpu);
-		u64_stats_init(&stats->syncp);
-	}
-
 	dt_mac_addr = of_get_mac_address(dn);
 	if (dt_mac_addr) {
 		mac_from = "device tree";
diff --git a/drivers/net/loopback.c b/drivers/net/loopback.c
index e7c1d5f8ab51..771c9bfa7d31 100644
--- a/drivers/net/loopback.c
+++ b/drivers/net/loopback.c
@@ -136,16 +136,9 @@ static const struct ethtool_ops loopback_ethtool_ops = {
 
 static int loopback_dev_init(struct net_device *dev)
 {
-	int i;
-	dev->lstats = alloc_percpu(struct pcpu_lstats);
+	dev->lstats = netdev_alloc_pcpu_stats(struct pcpu_lstats);
 	if (!dev->lstats)
 		return -ENOMEM;
-
-	for_each_possible_cpu(i) {
-		struct pcpu_lstats *lb_stats;
-		lb_stats = per_cpu_ptr(dev->lstats, i);
-		u64_stats_init(&lb_stats->syncp);
-	}
 	return 0;
 }
 
diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
index 8433de4509c7..25685e3eb472 100644
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -534,7 +534,6 @@ static int macvlan_init(struct net_device *dev)
 {
 	struct macvlan_dev *vlan = netdev_priv(dev);
 	const struct net_device *lowerdev = vlan->lowerdev;
-	int i;
 
 	dev->state		= (dev->state & ~MACVLAN_STATE_MASK) |
 				  (lowerdev->state & MACVLAN_STATE_MASK);
@@ -546,16 +545,10 @@ static int macvlan_init(struct net_device *dev)
 
 	macvlan_set_lockdep_class(dev);
 
-	vlan->pcpu_stats = alloc_percpu(struct vlan_pcpu_stats);
+	vlan->pcpu_stats = netdev_alloc_pcpu_stats(struct vlan_pcpu_stats);
 	if (!vlan->pcpu_stats)
 		return -ENOMEM;
 
-	for_each_possible_cpu(i) {
-		struct vlan_pcpu_stats *mvlstats;
-		mvlstats = per_cpu_ptr(vlan->pcpu_stats, i);
-		u64_stats_init(&mvlstats->syncp);
-	}
-
 	return 0;
 }
 
diff --git a/drivers/net/nlmon.c b/drivers/net/nlmon.c
index d2bb12bfabd5..14ce7de6a933 100644
--- a/drivers/net/nlmon.c
+++ b/drivers/net/nlmon.c
@@ -47,16 +47,7 @@ static int nlmon_change_mtu(struct net_device *dev, int new_mtu)
 
 static int nlmon_dev_init(struct net_device *dev)
 {
-	int i;
-
-	dev->lstats = alloc_percpu(struct pcpu_lstats);
-
-	for_each_possible_cpu(i) {
-		struct pcpu_lstats *nlmstats;
-		nlmstats = per_cpu_ptr(dev->lstats, i);
-		u64_stats_init(&nlmstats->syncp);
-	}
-
+	dev->lstats = netdev_alloc_pcpu_stats(struct pcpu_lstats);
 	return dev->lstats == NULL ? -ENOMEM : 0;
 }
 
diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c
index 28407426fd6f..adb46de7c90d 100644
--- a/drivers/net/team/team.c
+++ b/drivers/net/team/team.c
@@ -1540,16 +1540,10 @@ static int team_init(struct net_device *dev)
 	mutex_init(&team->lock);
 	team_set_no_mode(team);
 
-	team->pcpu_stats = alloc_percpu(struct team_pcpu_stats);
+	team->pcpu_stats = netdev_alloc_pcpu_stats(struct team_pcpu_stats);
 	if (!team->pcpu_stats)
 		return -ENOMEM;
 
-	for_each_possible_cpu(i) {
-		struct team_pcpu_stats *team_stats;
-		team_stats = per_cpu_ptr(team->pcpu_stats, i);
-		u64_stats_init(&team_stats->syncp);
-	}
-
 	for (i = 0; i < TEAM_PORT_HASHENTRIES; i++)
 		INIT_HLIST_HEAD(&team->en_port_hlist[i]);
 	INIT_LIST_HEAD(&team->port_list);
diff --git a/drivers/net/veth.c b/drivers/net/veth.c
index 2ec2041b62d4..91c33c1d3c9c 100644
--- a/drivers/net/veth.c
+++ b/drivers/net/veth.c
@@ -235,18 +235,9 @@ static int veth_change_mtu(struct net_device *dev, int new_mtu)
 
 static int veth_dev_init(struct net_device *dev)
 {
-	int i;
-
-	dev->vstats = alloc_percpu(struct pcpu_vstats);
+	dev->vstats = netdev_alloc_pcpu_stats(struct pcpu_vstats);
 	if (!dev->vstats)
 		return -ENOMEM;
-
-	for_each_possible_cpu(i) {
-		struct pcpu_vstats *veth_stats;
-		veth_stats = per_cpu_ptr(dev->vstats, i);
-		u64_stats_init(&veth_stats->syncp);
-	}
-
 	return 0;
 }
 
diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c
index b0f705c2378f..dec9820bc182 100644
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -1978,19 +1978,11 @@ static int vxlan_init(struct net_device *dev)
 	struct vxlan_dev *vxlan = netdev_priv(dev);
 	struct vxlan_net *vn = net_generic(dev_net(dev), vxlan_net_id);
 	struct vxlan_sock *vs;
-	int i;
 
-	dev->tstats = alloc_percpu(struct pcpu_sw_netstats);
+	dev->tstats = netdev_alloc_pcpu_stats(struct pcpu_sw_netstats);
 	if (!dev->tstats)
 		return -ENOMEM;
 
-	for_each_possible_cpu(i) {
-		struct pcpu_sw_netstats *vxlan_stats;
-		vxlan_stats = per_cpu_ptr(dev->tstats, i);
-		u64_stats_init(&vxlan_stats->syncp);
-	}
-
-
 	spin_lock(&vn->sock_lock);
 	vs = vxlan_find_sock(dev_net(dev), vxlan->dst_port);
 	if (vs) {
diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
index f9daa9e183f2..2b62d799bfd8 100644
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -1281,16 +1281,10 @@ static struct net_device *xennet_create_dev(struct xenbus_device *dev)
 	np->rx_refill_timer.function = rx_refill_timeout;
 
 	err = -ENOMEM;
-	np->stats = alloc_percpu(struct netfront_stats);
+	np->stats = netdev_alloc_pcpu_stats(struct netfront_stats);
 	if (np->stats == NULL)
 		goto exit;
 
-	for_each_possible_cpu(i) {
-		struct netfront_stats *xen_nf_stats;
-		xen_nf_stats = per_cpu_ptr(np->stats, i);
-		u64_stats_init(&xen_nf_stats->syncp);
-	}
-
 	/* Initialise tx_skbs as a free chain containing every entry. */
 	np->tx_skb_freelist = 0;
 	for (i = 0; i < NET_TX_RING_SIZE; i++) {
-- 
cgit v1.2.2


From b85b6fb1395561b1763de58e1de4eddbb80fed7f Mon Sep 17 00:00:00 2001
From: Wang Yufen <wangyufen@huawei.com>
Date: Fri, 14 Feb 2014 17:15:12 +0800
Subject: bonding:fix checkpatch errors with foo* bar|foo * bar

Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_alb.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index a2c47476804d..b3b26b057121 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -329,7 +329,7 @@ static void rlb_update_entry_from_arp(struct bonding *bond, struct arp_pkt *arp)
 
 	_lock_rx_hashtbl_bh(bond);
 
-	hash_index = _simple_hash((u8*)&(arp->ip_src), sizeof(arp->ip_src));
+	hash_index = _simple_hash((u8 *)&(arp->ip_src), sizeof(arp->ip_src));
 	client_info = &(bond_info->rx_hashtbl[hash_index]);
 
 	if ((client_info->assigned) &&
@@ -923,7 +923,7 @@ static void rlb_src_link(struct bonding *bond, u32 ip_src_hash, u32 ip_dst_hash)
 static void rlb_purge_src_ip(struct bonding *bond, struct arp_pkt *arp)
 {
 	struct alb_bond_info *bond_info = &(BOND_ALB_INFO(bond));
-	u32 ip_src_hash = _simple_hash((u8*)&(arp->ip_src), sizeof(arp->ip_src));
+	u32 ip_src_hash = _simple_hash((u8 *)&(arp->ip_src), sizeof(arp->ip_src));
 	u32 index;
 
 	_lock_rx_hashtbl_bh(bond);
@@ -1436,7 +1436,7 @@ int bond_alb_xmit(struct sk_buff *skb, struct net_device *bond_dev)
 			break;
 		}
 
-		hash_start = (char*)eth_data->h_dest;
+		hash_start = (char *)eth_data->h_dest;
 		hash_size = ETH_ALEN;
 		break;
 	case ETH_P_ARP:
-- 
cgit v1.2.2


From 4708a1b1a42a623f83a4119b2970001a80b983fe Mon Sep 17 00:00:00 2001
From: Wang Yufen <wangyufen@huawei.com>
Date: Fri, 14 Feb 2014 17:15:13 +0800
Subject: bonding:fix checkpatch errors comments and space

Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_alb.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index b3b26b057121..af5ea212c793 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -610,10 +610,10 @@ static void rlb_req_update_slave_clients(struct bonding *bond, struct slave *sla
 		}
 	}
 
-	// update the team's flag only after the whole iteration
+	/* update the team's flag only after the whole iteration */
 	if (ntt) {
 		bond_info->rx_ntt = 1;
-		//fasten the change
+		/* fasten the change */
 		bond_info->rlb_update_retry_counter = RLB_UPDATE_RETRY;
 	}
 
@@ -771,7 +771,7 @@ static struct slave *rlb_arp_xmit(struct sk_buff *skb, struct bonding *bond)
 		*/
 		tx_slave = rlb_choose_channel(skb, bond);
 		if (tx_slave) {
-			memcpy(arp->mac_src,tx_slave->dev->dev_addr, ETH_ALEN);
+			memcpy(arp->mac_src, tx_slave->dev->dev_addr, ETH_ALEN);
 		}
 		pr_debug("Server sent ARP Reply packet\n");
 	} else if (arp->op_code == htons(ARPOP_REQUEST)) {
-- 
cgit v1.2.2


From fdb89d75d0fdcca983dc0e8ebfadadb95a370e2a Mon Sep 17 00:00:00 2001
From: Wang Yufen <wangyufen@huawei.com>
Date: Fri, 14 Feb 2014 17:15:14 +0800
Subject: bonding:fix checkpatch warnings braces {}

Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_alb.c | 18 ++++++------------
 1 file changed, 6 insertions(+), 12 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index af5ea212c793..a1d4e7a4dc01 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -93,9 +93,8 @@ static inline u8 _simple_hash(const u8 *hash_start, int hash_size)
 	int i;
 	u8 hash = 0;
 
-	for (i = 0; i < hash_size; i++) {
+	for (i = 0; i < hash_size; i++)
 		hash ^= hash_start[i];
-	}
 
 	return hash;
 }
@@ -190,9 +189,8 @@ static int tlb_initialize(struct bonding *bond)
 
 	bond_info->tx_hashtbl = new_hashtbl;
 
-	for (i = 0; i < TLB_HASH_TABLE_SIZE; i++) {
+	for (i = 0; i < TLB_HASH_TABLE_SIZE; i++)
 		tlb_init_table_entry(&bond_info->tx_hashtbl[i], 0);
-	}
 
 	_unlock_tx_hashtbl_bh(bond);
 
@@ -264,9 +262,8 @@ static struct slave *__tlb_choose_channel(struct bonding *bond, u32 hash_index,
 			hash_table[hash_index].next = next_index;
 			hash_table[hash_index].prev = TLB_NULL_INDEX;
 
-			if (next_index != TLB_NULL_INDEX) {
+			if (next_index != TLB_NULL_INDEX)
 				hash_table[next_index].prev = hash_index;
-			}
 
 			slave_info->head = hash_index;
 			slave_info->load +=
@@ -274,9 +271,8 @@ static struct slave *__tlb_choose_channel(struct bonding *bond, u32 hash_index,
 		}
 	}
 
-	if (assigned_slave) {
+	if (assigned_slave)
 		hash_table[hash_index].tx_bytes += skb_len;
-	}
 
 	return assigned_slave;
 }
@@ -451,9 +447,8 @@ static struct slave *__rlb_next_rx_slave(struct bonding *bond)
  */
 static void rlb_teach_disabled_mac_on_primary(struct bonding *bond, u8 addr[])
 {
-	if (!bond->curr_active_slave) {
+	if (!bond->curr_active_slave)
 		return;
-	}
 
 	if (!bond->alb_info.primary_is_promisc) {
 		if (!dev_set_promiscuity(bond->curr_active_slave->dev, 1))
@@ -513,9 +508,8 @@ static void rlb_clear_slave(struct bonding *bond, struct slave *slave)
 
 	write_lock_bh(&bond->curr_slave_lock);
 
-	if (slave != bond->curr_active_slave) {
+	if (slave != bond->curr_active_slave)
 		rlb_teach_disabled_mac_on_primary(bond, slave->dev->dev_addr);
-	}
 
 	write_unlock_bh(&bond->curr_slave_lock);
 }
-- 
cgit v1.2.2


From 35d75ee43f93cdf8ed21ab37636397ecc44d3724 Mon Sep 17 00:00:00 2001
From: Wang Yufen <wangyufen@huawei.com>
Date: Fri, 14 Feb 2014 17:15:15 +0800
Subject: bonding:fix checkpatch warnings braces {}

Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_alb.c | 18 ++++++------------
 1 file changed, 6 insertions(+), 12 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index a1d4e7a4dc01..cde39f06b34c 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -518,9 +518,8 @@ static void rlb_update_client(struct rlb_client_info *client_info)
 {
 	int i;
 
-	if (!client_info->slave) {
+	if (!client_info->slave)
 		return;
-	}
 
 	for (i = 0; i < RLB_ARP_BURST_SIZE; i++) {
 		struct sk_buff *skb;
@@ -568,9 +567,8 @@ static void rlb_update_rx_clients(struct bonding *bond)
 		client_info = &(bond_info->rx_hashtbl[hash_index]);
 		if (client_info->ntt) {
 			rlb_update_client(client_info);
-			if (bond_info->rlb_update_retry_counter == 0) {
+			if (bond_info->rlb_update_retry_counter == 0)
 				client_info->ntt = 0;
-			}
 		}
 	}
 
@@ -764,9 +762,8 @@ static struct slave *rlb_arp_xmit(struct sk_buff *skb, struct bonding *bond)
 		* rx channel
 		*/
 		tx_slave = rlb_choose_channel(skb, bond);
-		if (tx_slave) {
+		if (tx_slave)
 			memcpy(arp->mac_src, tx_slave->dev->dev_addr, ETH_ALEN);
-		}
 		pr_debug("Server sent ARP Reply packet\n");
 	} else if (arp->op_code == htons(ARPOP_REQUEST)) {
 		/* Create an entry in the rx_hashtbl for this client as a
@@ -818,9 +815,8 @@ static void rlb_rebalance(struct bonding *bond)
 	}
 
 	/* update the team's flag only after the whole iteration */
-	if (ntt) {
+	if (ntt)
 		bond_info->rx_ntt = 1;
-	}
 	_unlock_rx_hashtbl_bh(bond);
 }
 
@@ -951,9 +947,8 @@ static int rlb_initialize(struct bonding *bond)
 
 	bond_info->rx_hashtbl_used_head = RLB_NULL_INDEX;
 
-	for (i = 0; i < RLB_HASH_TABLE_SIZE; i++) {
+	for (i = 0; i < RLB_HASH_TABLE_SIZE; i++)
 		rlb_init_table_entry(bond_info->rx_hashtbl + i);
-	}
 
 	_unlock_rx_hashtbl_bh(bond);
 
@@ -1324,9 +1319,8 @@ int bond_alb_initialize(struct bonding *bond, int rlb_enabled)
 	int res;
 
 	res = tlb_initialize(bond);
-	if (res) {
+	if (res)
 		return res;
-	}
 
 	if (rlb_enabled) {
 		bond->alb_info.rlb_enabled = 1;
-- 
cgit v1.2.2


From dda0fd5c838143909579895634b76788484ea428 Mon Sep 17 00:00:00 2001
From: Wang Yufen <wangyufen@huawei.com>
Date: Fri, 14 Feb 2014 17:15:16 +0800
Subject: bonding:fix checkpatch warnings braces {}

Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_alb.c | 20 +++++++-------------
 1 file changed, 7 insertions(+), 13 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index cde39f06b34c..e7a460096b51 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -1343,9 +1343,8 @@ void bond_alb_deinitialize(struct bonding *bond)
 
 	tlb_deinitialize(bond);
 
-	if (bond_info->rlb_enabled) {
+	if (bond_info->rlb_enabled)
 		rlb_deinitialize(bond);
-	}
 }
 
 int bond_alb_xmit(struct sk_buff *skb, struct net_device *bond_dev)
@@ -1429,9 +1428,8 @@ int bond_alb_xmit(struct sk_buff *skb, struct net_device *bond_dev)
 		break;
 	case ETH_P_ARP:
 		do_tx_balance = 0;
-		if (bond_info->rlb_enabled) {
+		if (bond_info->rlb_enabled)
 			tx_slave = rlb_arp_xmit(skb, bond);
-		}
 		break;
 	default:
 		do_tx_balance = 0;
@@ -1565,11 +1563,10 @@ void bond_alb_monitor(struct work_struct *work)
 				--bond_info->rlb_update_delay_counter;
 			} else {
 				rlb_update_rx_clients(bond);
-				if (bond_info->rlb_update_retry_counter) {
+				if (bond_info->rlb_update_retry_counter)
 					--bond_info->rlb_update_retry_counter;
-				} else {
+				else
 					bond_info->rx_ntt = 0;
-				}
 			}
 		}
 	}
@@ -1586,23 +1583,20 @@ int bond_alb_init_slave(struct bonding *bond, struct slave *slave)
 	int res;
 
 	res = alb_set_slave_mac_addr(slave, slave->perm_hwaddr);
-	if (res) {
+	if (res)
 		return res;
-	}
 
 	res = alb_handle_addr_collision_on_attach(bond, slave);
-	if (res) {
+	if (res)
 		return res;
-	}
 
 	tlb_init_slave(slave);
 
 	/* order a rebalance ASAP */
 	bond->alb_info.tx_rebalance_counter = BOND_TLB_REBALANCE_TICKS;
 
-	if (bond->alb_info.rlb_enabled) {
+	if (bond->alb_info.rlb_enabled)
 		bond->alb_info.rlb_rebalance = 1;
-	}
 
 	return 0;
 }
-- 
cgit v1.2.2


From 73ac0cd48ffcbca2a07ffc90bc8c166a813e03e2 Mon Sep 17 00:00:00 2001
From: Wang Yufen <wangyufen@huawei.com>
Date: Fri, 14 Feb 2014 17:15:17 +0800
Subject: bonding:fix checkpatch warnings braces {}

Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_alb.c | 15 +++++----------
 1 file changed, 5 insertions(+), 10 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index e7a460096b51..a21286088821 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -1627,9 +1627,8 @@ void bond_alb_handle_link_change(struct bonding *bond, struct slave *slave, char
 
 	if (link == BOND_LINK_DOWN) {
 		tlb_clear_slave(bond, slave, 0);
-		if (bond->alb_info.rlb_enabled) {
+		if (bond->alb_info.rlb_enabled)
 			rlb_clear_slave(bond, slave);
-		}
 	} else if (link == BOND_LINK_UP) {
 		/* order a rebalance ASAP */
 		bond_info->tx_rebalance_counter = BOND_TLB_REBALANCE_TICKS;
@@ -1741,14 +1740,12 @@ int bond_alb_set_mac_address(struct net_device *bond_dev, void *addr)
 	struct slave *swap_slave;
 	int res;
 
-	if (!is_valid_ether_addr(sa->sa_data)) {
+	if (!is_valid_ether_addr(sa->sa_data))
 		return -EADDRNOTAVAIL;
-	}
 
 	res = alb_set_mac_address(bond, addr);
-	if (res) {
+	if (res)
 		return res;
-	}
 
 	memcpy(bond_dev->dev_addr, sa->sa_data, bond_dev->addr_len);
 
@@ -1756,9 +1753,8 @@ int bond_alb_set_mac_address(struct net_device *bond_dev, void *addr)
 	 * Otherwise we'll need to pass the new address to it and handle
 	 * duplications.
 	 */
-	if (!bond->curr_active_slave) {
+	if (!bond->curr_active_slave)
 		return 0;
-	}
 
 	swap_slave = bond_slave_has_mac(bond, bond_dev->dev_addr);
 
@@ -1782,8 +1778,7 @@ int bond_alb_set_mac_address(struct net_device *bond_dev, void *addr)
 
 void bond_alb_clear_vlan(struct bonding *bond, unsigned short vlan_id)
 {
-	if (bond->alb_info.rlb_enabled) {
+	if (bond->alb_info.rlb_enabled)
 		rlb_clear_vlan(bond, vlan_id);
-	}
 }
 
-- 
cgit v1.2.2


From 90046f509dca8e754b75aacb6ef7afa68b102c63 Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Fri, 14 Feb 2014 14:45:51 +0100
Subject: ath10k: fix SMPS support

Firmware ignores SMPS flags in peer assoc command.

For SMPS to work it is necessary to set peer
parameter after peer assoc command so that tx
chainmask is setup properly.

This should fix packet loss and improve throughput
with stations that have SMPS enabled upon
association.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/mac.c | 56 +++++++++++++++++++++++++++--------
 1 file changed, 44 insertions(+), 12 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 44b550b2fcfd..c2aaecb4c25b 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -1082,7 +1082,6 @@ static void ath10k_peer_assoc_h_ht(struct ath10k *ar,
 				   struct wmi_peer_assoc_complete_arg *arg)
 {
 	const struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
-	int smps;
 	int i, n;
 
 	lockdep_assert_held(&ar->conf_mutex);
@@ -1128,17 +1127,6 @@ static void ath10k_peer_assoc_h_ht(struct ath10k *ar,
 		arg->peer_flags |= WMI_PEER_STBC;
 	}
 
-	smps = ht_cap->cap & IEEE80211_HT_CAP_SM_PS;
-	smps >>= IEEE80211_HT_CAP_SM_PS_SHIFT;
-
-	if (smps == WLAN_HT_CAP_SM_PS_STATIC) {
-		arg->peer_flags |= WMI_PEER_SPATIAL_MUX;
-		arg->peer_flags |= WMI_PEER_STATIC_MIMOPS;
-	} else if (smps == WLAN_HT_CAP_SM_PS_DYNAMIC) {
-		arg->peer_flags |= WMI_PEER_SPATIAL_MUX;
-		arg->peer_flags |= WMI_PEER_DYN_MIMOPS;
-	}
-
 	if (ht_cap->mcs.rx_mask[1] && ht_cap->mcs.rx_mask[2])
 		arg->peer_rate_caps |= WMI_RC_TS_FLAG;
 	else if (ht_cap->mcs.rx_mask[1])
@@ -1378,6 +1366,33 @@ static int ath10k_peer_assoc_prepare(struct ath10k *ar,
 	return 0;
 }
 
+static const u32 ath10k_smps_map[] = {
+	[WLAN_HT_CAP_SM_PS_STATIC] = WMI_PEER_SMPS_STATIC,
+	[WLAN_HT_CAP_SM_PS_DYNAMIC] = WMI_PEER_SMPS_DYNAMIC,
+	[WLAN_HT_CAP_SM_PS_INVALID] = WMI_PEER_SMPS_PS_NONE,
+	[WLAN_HT_CAP_SM_PS_DISABLED] = WMI_PEER_SMPS_PS_NONE,
+};
+
+static int ath10k_setup_peer_smps(struct ath10k *ar, struct ath10k_vif *arvif,
+				  const u8 *addr,
+				  const struct ieee80211_sta_ht_cap *ht_cap)
+{
+	int smps;
+
+	if (!ht_cap->ht_supported)
+		return 0;
+
+	smps = ht_cap->cap & IEEE80211_HT_CAP_SM_PS;
+	smps >>= IEEE80211_HT_CAP_SM_PS_SHIFT;
+
+	if (smps >= ARRAY_SIZE(ath10k_smps_map))
+		return -EINVAL;
+
+	return ath10k_wmi_peer_set_param(ar, arvif->vdev_id, addr,
+					 WMI_PEER_SMPS_STATE,
+					 ath10k_smps_map[smps]);
+}
+
 /* can be called only in mac80211 callbacks due to `key_count` usage */
 static void ath10k_bss_assoc(struct ieee80211_hw *hw,
 			     struct ieee80211_vif *vif,
@@ -1385,6 +1400,7 @@ static void ath10k_bss_assoc(struct ieee80211_hw *hw,
 {
 	struct ath10k *ar = hw->priv;
 	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+	struct ieee80211_sta_ht_cap ht_cap;
 	struct wmi_peer_assoc_complete_arg peer_arg;
 	struct ieee80211_sta *ap_sta;
 	int ret;
@@ -1401,6 +1417,10 @@ static void ath10k_bss_assoc(struct ieee80211_hw *hw,
 		return;
 	}
 
+	/* ap_sta must be accessed only within rcu section which must be left
+	 * before calling ath10k_setup_peer_smps() which might sleep. */
+	ht_cap = ap_sta->ht_cap;
+
 	ret = ath10k_peer_assoc_prepare(ar, arvif, ap_sta,
 					bss_conf, &peer_arg);
 	if (ret) {
@@ -1419,6 +1439,12 @@ static void ath10k_bss_assoc(struct ieee80211_hw *hw,
 		return;
 	}
 
+	ret = ath10k_setup_peer_smps(ar, arvif, bss_conf->bssid, &ht_cap);
+	if (ret) {
+		ath10k_warn("failed to setup peer SMPS: %d\n", ret);
+		return;
+	}
+
 	ath10k_dbg(ATH10K_DBG_MAC,
 		   "mac vdev %d up (associated) bssid %pM aid %d\n",
 		   arvif->vdev_id, bss_conf->bssid, bss_conf->aid);
@@ -1500,6 +1526,12 @@ static int ath10k_station_assoc(struct ath10k *ar, struct ath10k_vif *arvif,
 		return ret;
 	}
 
+	ret = ath10k_setup_peer_smps(ar, arvif, sta->addr, &sta->ht_cap);
+	if (ret) {
+		ath10k_warn("failed to setup peer SMPS: %d\n", ret);
+		return ret;
+	}
+
 	ret = ath10k_install_peer_wep_keys(arvif, sta->addr);
 	if (ret) {
 		ath10k_warn("could not install peer wep keys (%d)\n", ret);
-- 
cgit v1.2.2


From 9797febc4cc112869b19a110f70e0dedb1bb63d6 Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Fri, 14 Feb 2014 14:49:48 +0100
Subject: ath10k: implement sta_rc_update()

This allows dynamic changes of bandwidth/nss/smps,
e.g. via ht/vht operation mode change
notification.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/core.h |  12 +++
 drivers/net/wireless/ath/ath10k/mac.c  | 157 +++++++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/wmi.h  |   6 ++
 3 files changed, 175 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index fae53f909550..1fc26fe057e8 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -228,6 +228,18 @@ struct ath10k_peer {
 	struct ieee80211_key_conf *keys[WMI_MAX_KEY_INDEX + 1];
 };
 
+struct ath10k_sta {
+	struct ath10k_vif *arvif;
+
+	/* the following are protected by ar->data_lock */
+	u32 changed; /* IEEE80211_RC_* */
+	u32 bw;
+	u32 nss;
+	u32 smps;
+
+	struct work_struct update_wk;
+};
+
 #define ATH10K_VDEV_SETUP_TIMEOUT_HZ (5*HZ)
 
 struct ath10k_vif {
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index c2aaecb4c25b..e17f5d732b5a 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -3104,6 +3104,69 @@ exit:
 	return ret;
 }
 
+static void ath10k_sta_rc_update_wk(struct work_struct *wk)
+{
+	struct ath10k *ar;
+	struct ath10k_vif *arvif;
+	struct ath10k_sta *arsta;
+	struct ieee80211_sta *sta;
+	u32 changed, bw, nss, smps;
+	int err;
+
+	arsta = container_of(wk, struct ath10k_sta, update_wk);
+	sta = container_of((void *)arsta, struct ieee80211_sta, drv_priv);
+	arvif = arsta->arvif;
+	ar = arvif->ar;
+
+	spin_lock_bh(&ar->data_lock);
+
+	changed = arsta->changed;
+	arsta->changed = 0;
+
+	bw = arsta->bw;
+	nss = arsta->nss;
+	smps = arsta->smps;
+
+	spin_unlock_bh(&ar->data_lock);
+
+	mutex_lock(&ar->conf_mutex);
+
+	if (changed & IEEE80211_RC_BW_CHANGED) {
+		ath10k_dbg(ATH10K_DBG_MAC, "mac update sta %pM peer bw %d\n",
+			   sta->addr, bw);
+
+		err = ath10k_wmi_peer_set_param(ar, arvif->vdev_id, sta->addr,
+						WMI_PEER_CHAN_WIDTH, bw);
+		if (err)
+			ath10k_warn("failed to update STA %pM peer bw %d: %d\n",
+				    sta->addr, bw, err);
+	}
+
+	if (changed & IEEE80211_RC_NSS_CHANGED) {
+		ath10k_dbg(ATH10K_DBG_MAC, "mac update sta %pM nss %d\n",
+			   sta->addr, nss);
+
+		err = ath10k_wmi_peer_set_param(ar, arvif->vdev_id, sta->addr,
+						WMI_PEER_NSS, nss);
+		if (err)
+			ath10k_warn("failed to update STA %pM nss %d: %d\n",
+				    sta->addr, nss, err);
+	}
+
+	if (changed & IEEE80211_RC_SMPS_CHANGED) {
+		ath10k_dbg(ATH10K_DBG_MAC, "mac update sta %pM smps %d\n",
+			   sta->addr, smps);
+
+		err = ath10k_wmi_peer_set_param(ar, arvif->vdev_id, sta->addr,
+						WMI_PEER_SMPS_STATE, smps);
+		if (err)
+			ath10k_warn("failed to update STA %pM smps %d: %d\n",
+				    sta->addr, smps, err);
+	}
+
+	mutex_unlock(&ar->conf_mutex);
+}
+
 static int ath10k_sta_state(struct ieee80211_hw *hw,
 			    struct ieee80211_vif *vif,
 			    struct ieee80211_sta *sta,
@@ -3112,9 +3175,15 @@ static int ath10k_sta_state(struct ieee80211_hw *hw,
 {
 	struct ath10k *ar = hw->priv;
 	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+	struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv;
 	int max_num_peers;
 	int ret = 0;
 
+	/* cancel must be done outside the mutex to avoid deadlock */
+	if ((old_state == IEEE80211_STA_NONE &&
+	     new_state == IEEE80211_STA_NOTEXIST))
+		cancel_work_sync(&arsta->update_wk);
+
 	mutex_lock(&ar->conf_mutex);
 
 	if (old_state == IEEE80211_STA_NOTEXIST &&
@@ -3139,6 +3208,10 @@ static int ath10k_sta_state(struct ieee80211_hw *hw,
 			   "mac vdev %d peer create %pM (new sta) num_peers %d\n",
 			   arvif->vdev_id, sta->addr, ar->num_peers);
 
+		memset(arsta, 0, sizeof(*arsta));
+		arsta->arvif = arvif;
+		INIT_WORK(&arsta->update_wk, ath10k_sta_rc_update_wk);
+
 		ret = ath10k_peer_create(ar, arvif->vdev_id, sta->addr);
 		if (ret)
 			ath10k_warn("Failed to add peer %pM for vdev %d when adding a new sta: %i\n",
@@ -3905,6 +3978,88 @@ static void ath10k_channel_switch_beacon(struct ieee80211_hw *hw,
 	return;
 }
 
+static void ath10k_sta_rc_update(struct ieee80211_hw *hw,
+				 struct ieee80211_vif *vif,
+				 struct ieee80211_sta *sta,
+				 u32 changed)
+{
+	struct ath10k *ar = hw->priv;
+	struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv;
+	u32 bw, smps;
+
+	spin_lock_bh(&ar->data_lock);
+
+	ath10k_dbg(ATH10K_DBG_MAC,
+		   "mac sta rc update for %pM changed %08x bw %d nss %d smps %d\n",
+		   sta->addr, changed, sta->bandwidth, sta->rx_nss,
+		   sta->smps_mode);
+
+	if (changed & IEEE80211_RC_BW_CHANGED) {
+		bw = WMI_PEER_CHWIDTH_20MHZ;
+
+		switch (sta->bandwidth) {
+		case IEEE80211_STA_RX_BW_20:
+			bw = WMI_PEER_CHWIDTH_20MHZ;
+			break;
+		case IEEE80211_STA_RX_BW_40:
+			bw = WMI_PEER_CHWIDTH_40MHZ;
+			break;
+		case IEEE80211_STA_RX_BW_80:
+			bw = WMI_PEER_CHWIDTH_80MHZ;
+			break;
+		case IEEE80211_STA_RX_BW_160:
+			ath10k_warn("mac sta rc update for %pM: invalid bw %d\n",
+				    sta->addr, sta->bandwidth);
+			bw = WMI_PEER_CHWIDTH_20MHZ;
+			break;
+		}
+
+		arsta->bw = bw;
+	}
+
+	if (changed & IEEE80211_RC_NSS_CHANGED)
+		arsta->nss = sta->rx_nss;
+
+	if (changed & IEEE80211_RC_SMPS_CHANGED) {
+		smps = WMI_PEER_SMPS_PS_NONE;
+
+		switch (sta->smps_mode) {
+		case IEEE80211_SMPS_AUTOMATIC:
+		case IEEE80211_SMPS_OFF:
+			smps = WMI_PEER_SMPS_PS_NONE;
+			break;
+		case IEEE80211_SMPS_STATIC:
+			smps = WMI_PEER_SMPS_STATIC;
+			break;
+		case IEEE80211_SMPS_DYNAMIC:
+			smps = WMI_PEER_SMPS_DYNAMIC;
+			break;
+		case IEEE80211_SMPS_NUM_MODES:
+			ath10k_warn("mac sta rc update for %pM: invalid smps: %d\n",
+				    sta->addr, sta->smps_mode);
+			smps = WMI_PEER_SMPS_PS_NONE;
+			break;
+		}
+
+		arsta->smps = smps;
+	}
+
+	if (changed & IEEE80211_RC_SUPP_RATES_CHANGED) {
+		/* FIXME: Not implemented. Probably the only way to do it would
+		 * be to re-assoc the peer. */
+		changed &= ~IEEE80211_RC_SUPP_RATES_CHANGED;
+		ath10k_dbg(ATH10K_DBG_MAC,
+			   "mac sta rc update for %pM: changing supported rates not implemented\n",
+			   sta->addr);
+	}
+
+	arsta->changed |= changed;
+
+	spin_unlock_bh(&ar->data_lock);
+
+	ieee80211_queue_work(hw, &arsta->update_wk);
+}
+
 static const struct ieee80211_ops ath10k_ops = {
 	.tx				= ath10k_tx,
 	.start				= ath10k_start,
@@ -3929,6 +4084,7 @@ static const struct ieee80211_ops ath10k_ops = {
 	.get_survey			= ath10k_get_survey,
 	.set_bitrate_mask		= ath10k_set_bitrate_mask,
 	.channel_switch_beacon		= ath10k_channel_switch_beacon,
+	.sta_rc_update			= ath10k_sta_rc_update,
 #ifdef CONFIG_PM
 	.suspend			= ath10k_suspend,
 	.resume				= ath10k_resume,
@@ -4304,6 +4460,7 @@ int ath10k_mac_register(struct ath10k *ar)
 	ar->hw->wiphy->max_scan_ie_len = WLAN_SCAN_PARAMS_MAX_IE_LEN;
 
 	ar->hw->vif_data_size = sizeof(struct ath10k_vif);
+	ar->hw->sta_data_size = sizeof(struct ath10k_sta);
 
 	ar->hw->max_listen_interval = ATH10K_MAX_HW_LISTEN_INTERVAL;
 
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index fc1093a51ab1..4fcc96aa9513 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -3876,6 +3876,12 @@ enum wmi_peer_smps_state {
 	WMI_PEER_SMPS_DYNAMIC = 0x2
 };
 
+enum wmi_peer_chwidth {
+	WMI_PEER_CHWIDTH_20MHZ = 0,
+	WMI_PEER_CHWIDTH_40MHZ = 1,
+	WMI_PEER_CHWIDTH_80MHZ = 2,
+};
+
 enum wmi_peer_param {
 	WMI_PEER_SMPS_STATE = 0x1, /* see %wmi_peer_smps_state */
 	WMI_PEER_AMPDU      = 0x2,
-- 
cgit v1.2.2


From 327cdedaf6e6334aeb219df5a68da5e6906ee72e Mon Sep 17 00:00:00 2001
From: Julia Lawall <Julia.Lawall@lip6.fr>
Date: Sat, 15 Feb 2014 08:36:13 +0100
Subject: caif: delete unnecessary field initialization

On success, the function netdev_alloc_skb initializes the dev field of its
result to its first argument, so this doesn't have to be done in the
calling context.

The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression skb,privn,e;
@@

skb = netdev_alloc_skb(privn,...);
... when strict
(
-skb->dev = privn;
|
?skb = e
)
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/caif/caif_serial.c | 1 -
 drivers/net/caif/caif_spi.c    | 1 -
 2 files changed, 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/caif/caif_serial.c b/drivers/net/caif/caif_serial.c
index 88a6a5810ec6..fc73865bb83a 100644
--- a/drivers/net/caif/caif_serial.c
+++ b/drivers/net/caif/caif_serial.c
@@ -204,7 +204,6 @@ static void ldisc_receive(struct tty_struct *tty, const u8 *data,
 
 	skb->protocol = htons(ETH_P_CAIF);
 	skb_reset_mac_header(skb);
-	skb->dev = ser->dev;
 	debugfs_rx(ser, data, count);
 	/* Push received packet up the stack. */
 	ret = netif_rx_ni(skb);
diff --git a/drivers/net/caif/caif_spi.c b/drivers/net/caif/caif_spi.c
index 155db68e13ba..ff54c0eb2052 100644
--- a/drivers/net/caif/caif_spi.c
+++ b/drivers/net/caif/caif_spi.c
@@ -554,7 +554,6 @@ int cfspi_rxfrm(struct cfspi *cfspi, u8 *buf, size_t len)
 
 		skb->protocol = htons(ETH_P_CAIF);
 		skb_reset_mac_header(skb);
-		skb->dev = cfspi->ndev;
 
 		/*
 		 * Push received packet up the stack.
-- 
cgit v1.2.2


From 91565ebbcc5aea69d4d6cb3832f52da03dbd44b6 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Sat, 15 Feb 2014 15:57:04 -0800
Subject: bonding: Convert pr_warning to pr_warn, neatening

Use more current logging style.

Coalesce formats, realign arguments, drop unnecessary periods.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_alb.c     |   6 +-
 drivers/net/bonding/bond_debugfs.c |  10 ++--
 drivers/net/bonding/bond_main.c    | 116 ++++++++++++++++++-------------------
 drivers/net/bonding/bond_procfs.c  |   8 +--
 4 files changed, 67 insertions(+), 73 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index a21286088821..e9f0a98f3df5 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -1243,9 +1243,9 @@ static int alb_handle_addr_collision_on_attach(struct bonding *bond, struct slav
 	if (free_mac_slave) {
 		alb_set_slave_mac_addr(slave, free_mac_slave->perm_hwaddr);
 
-		pr_warning("%s: Warning: the hw address of slave %s is in use by the bond; giving it the hw address of %s\n",
-			   bond->dev->name, slave->dev->name,
-			   free_mac_slave->dev->name);
+		pr_warn("%s: Warning: the hw address of slave %s is in use by the bond; giving it the hw address of %s\n",
+			bond->dev->name, slave->dev->name,
+			free_mac_slave->dev->name);
 
 	} else if (has_bond_addr) {
 		pr_err("%s: Error: the hw address of slave %s is in use by the bond; couldn't find a slave with a free hw address to give it (this should not have happened)\n",
diff --git a/drivers/net/bonding/bond_debugfs.c b/drivers/net/bonding/bond_debugfs.c
index 5fc4c2351478..2d3f7fa541ff 100644
--- a/drivers/net/bonding/bond_debugfs.c
+++ b/drivers/net/bonding/bond_debugfs.c
@@ -69,7 +69,7 @@ void bond_debug_register(struct bonding *bond)
 		debugfs_create_dir(bond->dev->name, bonding_debug_root);
 
 	if (!bond->debug_dir) {
-		pr_warning("%s: Warning: failed to register to debugfs\n",
+		pr_warn("%s: Warning: failed to register to debugfs\n",
 			bond->dev->name);
 		return;
 	}
@@ -98,9 +98,8 @@ void bond_debug_reregister(struct bonding *bond)
 	if (d) {
 		bond->debug_dir = d;
 	} else {
-		pr_warning("%s: Warning: failed to reregister, "
-				"so just unregister old one\n",
-				bond->dev->name);
+		pr_warn("%s: Warning: failed to reregister, so just unregister old one\n",
+			bond->dev->name);
 		bond_debug_unregister(bond);
 	}
 }
@@ -110,8 +109,7 @@ void bond_create_debugfs(void)
 	bonding_debug_root = debugfs_create_dir("bonding", NULL);
 
 	if (!bonding_debug_root) {
-		pr_warning("Warning: Cannot create bonding directory"
-				" in debugfs\n");
+		pr_warn("Warning: Cannot create bonding directory in debugfs\n");
 	}
 }
 
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 58aa531d7850..1d4dfc9f649a 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1183,8 +1183,8 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 	if (!bond->params.use_carrier &&
 	    slave_dev->ethtool_ops->get_link == NULL &&
 	    slave_ops->ndo_do_ioctl == NULL) {
-		pr_warning("%s: Warning: no link monitoring support for %s\n",
-			   bond_dev->name, slave_dev->name);
+		pr_warn("%s: Warning: no link monitoring support for %s\n",
+			bond_dev->name, slave_dev->name);
 	}
 
 	/* already enslaved */
@@ -1202,9 +1202,9 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 			       bond_dev->name, slave_dev->name, bond_dev->name);
 			return -EPERM;
 		} else {
-			pr_warning("%s: Warning: enslaved VLAN challenged slave %s. Adding VLANs will be blocked as long as %s is part of bond %s\n",
-				   bond_dev->name, slave_dev->name,
-				   slave_dev->name, bond_dev->name);
+			pr_warn("%s: Warning: enslaved VLAN challenged slave %s. Adding VLANs will be blocked as long as %s is part of bond %s\n",
+				bond_dev->name, slave_dev->name,
+				slave_dev->name, bond_dev->name);
 		}
 	} else {
 		pr_debug("%s: ! NETIF_F_VLAN_CHALLENGED\n", slave_dev->name);
@@ -1419,12 +1419,12 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 			 * supported); thus, we don't need to change
 			 * the messages for netif_carrier.
 			 */
-			pr_warning("%s: Warning: MII and ETHTOOL support not available for interface %s, and arp_interval/arp_ip_target module parameters not specified, thus bonding will not detect link failures! see bonding.txt for details.\n",
-			       bond_dev->name, slave_dev->name);
+			pr_warn("%s: Warning: MII and ETHTOOL support not available for interface %s, and arp_interval/arp_ip_target module parameters not specified, thus bonding will not detect link failures! see bonding.txt for details\n",
+				bond_dev->name, slave_dev->name);
 		} else if (link_reporting == -1) {
 			/* unable get link status using mii/ethtool */
-			pr_warning("%s: Warning: can't get link status from interface %s; the network driver associated with this interface does not support MII or ETHTOOL link status reporting, thus miimon has no effect on this interface.\n",
-				   bond_dev->name, slave_dev->name);
+			pr_warn("%s: Warning: can't get link status from interface %s; the network driver associated with this interface does not support MII or ETHTOOL link status reporting, thus miimon has no effect on this interface\n",
+				bond_dev->name, slave_dev->name);
 		}
 	}
 
@@ -1725,10 +1725,10 @@ static int __bond_release_one(struct net_device *bond_dev,
 		eth_hw_addr_random(bond_dev);
 
 		if (vlan_uses_dev(bond_dev)) {
-			pr_warning("%s: Warning: clearing HW address of %s while it still has VLANs.\n",
-				   bond_dev->name, bond_dev->name);
-			pr_warning("%s: When re-adding slaves, make sure the bond's HW address matches its VLANs'.\n",
-				   bond_dev->name);
+			pr_warn("%s: Warning: clearing HW address of %s while it still has VLANs\n",
+				bond_dev->name, bond_dev->name);
+			pr_warn("%s: When re-adding slaves, make sure the bond's HW address matches its VLANs\n",
+				bond_dev->name);
 		}
 	}
 
@@ -4046,74 +4046,71 @@ static int bond_check_params(struct bond_params *params)
 		}
 		params->ad_select = valptr->value;
 		if (bond_mode != BOND_MODE_8023AD)
-			pr_warning("ad_select param only affects 802.3ad mode\n");
+			pr_warn("ad_select param only affects 802.3ad mode\n");
 	} else {
 		params->ad_select = BOND_AD_STABLE;
 	}
 
 	if (max_bonds < 0) {
-		pr_warning("Warning: max_bonds (%d) not in range %d-%d, so it was reset to BOND_DEFAULT_MAX_BONDS (%d)\n",
-			   max_bonds, 0, INT_MAX, BOND_DEFAULT_MAX_BONDS);
+		pr_warn("Warning: max_bonds (%d) not in range %d-%d, so it was reset to BOND_DEFAULT_MAX_BONDS (%d)\n",
+			max_bonds, 0, INT_MAX, BOND_DEFAULT_MAX_BONDS);
 		max_bonds = BOND_DEFAULT_MAX_BONDS;
 	}
 
 	if (miimon < 0) {
-		pr_warning("Warning: miimon module parameter (%d), not in range 0-%d, so it was reset to 0\n",
-			   miimon, INT_MAX);
+		pr_warn("Warning: miimon module parameter (%d), not in range 0-%d, so it was reset to 0\n",
+			miimon, INT_MAX);
 		miimon = 0;
 	}
 
 	if (updelay < 0) {
-		pr_warning("Warning: updelay module parameter (%d), not in range 0-%d, so it was reset to 0\n",
-			   updelay, INT_MAX);
+		pr_warn("Warning: updelay module parameter (%d), not in range 0-%d, so it was reset to 0\n",
+			updelay, INT_MAX);
 		updelay = 0;
 	}
 
 	if (downdelay < 0) {
-		pr_warning("Warning: downdelay module parameter (%d), not in range 0-%d, so it was reset to 0\n",
-			   downdelay, INT_MAX);
+		pr_warn("Warning: downdelay module parameter (%d), not in range 0-%d, so it was reset to 0\n",
+			downdelay, INT_MAX);
 		downdelay = 0;
 	}
 
 	if ((use_carrier != 0) && (use_carrier != 1)) {
-		pr_warning("Warning: use_carrier module parameter (%d), not of valid value (0/1), so it was set to 1\n",
-			   use_carrier);
+		pr_warn("Warning: use_carrier module parameter (%d), not of valid value (0/1), so it was set to 1\n",
+			use_carrier);
 		use_carrier = 1;
 	}
 
 	if (num_peer_notif < 0 || num_peer_notif > 255) {
-		pr_warning("Warning: num_grat_arp/num_unsol_na (%d) not in range 0-255 so it was reset to 1\n",
-			   num_peer_notif);
+		pr_warn("Warning: num_grat_arp/num_unsol_na (%d) not in range 0-255 so it was reset to 1\n",
+			num_peer_notif);
 		num_peer_notif = 1;
 	}
 
 	/* reset values for 802.3ad/TLB/ALB */
 	if (BOND_NO_USES_ARP(bond_mode)) {
 		if (!miimon) {
-			pr_warning("Warning: miimon must be specified, otherwise bonding will not detect link failure, speed and duplex which are essential for 802.3ad operation\n");
-			pr_warning("Forcing miimon to 100msec\n");
+			pr_warn("Warning: miimon must be specified, otherwise bonding will not detect link failure, speed and duplex which are essential for 802.3ad operation\n");
+			pr_warn("Forcing miimon to 100msec\n");
 			miimon = BOND_DEFAULT_MIIMON;
 		}
 	}
 
 	if (tx_queues < 1 || tx_queues > 255) {
-		pr_warning("Warning: tx_queues (%d) should be between "
-			   "1 and 255, resetting to %d\n",
-			   tx_queues, BOND_DEFAULT_TX_QUEUES);
+		pr_warn("Warning: tx_queues (%d) should be between 1 and 255, resetting to %d\n",
+			tx_queues, BOND_DEFAULT_TX_QUEUES);
 		tx_queues = BOND_DEFAULT_TX_QUEUES;
 	}
 
 	if ((all_slaves_active != 0) && (all_slaves_active != 1)) {
-		pr_warning("Warning: all_slaves_active module parameter (%d), "
-			   "not of valid value (0/1), so it was set to "
-			   "0\n", all_slaves_active);
+		pr_warn("Warning: all_slaves_active module parameter (%d), not of valid value (0/1), so it was set to 0\n",
+			all_slaves_active);
 		all_slaves_active = 0;
 	}
 
 	if (resend_igmp < 0 || resend_igmp > 255) {
-		pr_warning("Warning: resend_igmp (%d) should be between "
-			   "0 and 255, resetting to %d\n",
-			   resend_igmp, BOND_DEFAULT_RESEND_IGMP);
+		pr_warn("Warning: resend_igmp (%d) should be between 0 and 255, resetting to %d\n",
+			resend_igmp, BOND_DEFAULT_RESEND_IGMP);
 		resend_igmp = BOND_DEFAULT_RESEND_IGMP;
 	}
 
@@ -4134,37 +4131,36 @@ static int bond_check_params(struct bond_params *params)
 			/* just warn the user the up/down delay will have
 			 * no effect since miimon is zero...
 			 */
-			pr_warning("Warning: miimon module parameter not set and updelay (%d) or downdelay (%d) module parameter is set; updelay and downdelay have no effect unless miimon is set\n",
-				   updelay, downdelay);
+			pr_warn("Warning: miimon module parameter not set and updelay (%d) or downdelay (%d) module parameter is set; updelay and downdelay have no effect unless miimon is set\n",
+				updelay, downdelay);
 		}
 	} else {
 		/* don't allow arp monitoring */
 		if (arp_interval) {
-			pr_warning("Warning: miimon (%d) and arp_interval (%d) can't be used simultaneously, disabling ARP monitoring\n",
-				   miimon, arp_interval);
+			pr_warn("Warning: miimon (%d) and arp_interval (%d) can't be used simultaneously, disabling ARP monitoring\n",
+				miimon, arp_interval);
 			arp_interval = 0;
 		}
 
 		if ((updelay % miimon) != 0) {
-			pr_warning("Warning: updelay (%d) is not a multiple of miimon (%d), updelay rounded to %d ms\n",
-				   updelay, miimon,
-				   (updelay / miimon) * miimon);
+			pr_warn("Warning: updelay (%d) is not a multiple of miimon (%d), updelay rounded to %d ms\n",
+				updelay, miimon, (updelay / miimon) * miimon);
 		}
 
 		updelay /= miimon;
 
 		if ((downdelay % miimon) != 0) {
-			pr_warning("Warning: downdelay (%d) is not a multiple of miimon (%d), downdelay rounded to %d ms\n",
-				   downdelay, miimon,
-				   (downdelay / miimon) * miimon);
+			pr_warn("Warning: downdelay (%d) is not a multiple of miimon (%d), downdelay rounded to %d ms\n",
+				downdelay, miimon,
+				(downdelay / miimon) * miimon);
 		}
 
 		downdelay /= miimon;
 	}
 
 	if (arp_interval < 0) {
-		pr_warning("Warning: arp_interval module parameter (%d) , not in range 0-%d, so it was reset to 0\n",
-			   arp_interval, INT_MAX);
+		pr_warn("Warning: arp_interval module parameter (%d), not in range 0-%d, so it was reset to 0\n",
+			arp_interval, INT_MAX);
 		arp_interval = 0;
 	}
 
@@ -4175,22 +4171,22 @@ static int bond_check_params(struct bond_params *params)
 		__be32 ip;
 		if (!in4_pton(arp_ip_target[i], -1, (u8 *)&ip, -1, NULL) ||
 		    IS_IP_TARGET_UNUSABLE_ADDRESS(ip)) {
-			pr_warning("Warning: bad arp_ip_target module parameter (%s), ARP monitoring will not be performed\n",
-				   arp_ip_target[i]);
+			pr_warn("Warning: bad arp_ip_target module parameter (%s), ARP monitoring will not be performed\n",
+				arp_ip_target[i]);
 			arp_interval = 0;
 		} else {
 			if (bond_get_targets_ip(arp_target, ip) == -1)
 				arp_target[arp_ip_count++] = ip;
 			else
-				pr_warning("Warning: duplicate address %pI4 in arp_ip_target, skipping\n",
-					   &ip);
+				pr_warn("Warning: duplicate address %pI4 in arp_ip_target, skipping\n",
+					&ip);
 		}
 	}
 
 	if (arp_interval && !arp_ip_count) {
 		/* don't allow arping if no arp_ip_target given... */
-		pr_warning("Warning: arp_interval module parameter (%d) specified without providing an arp_ip_target parameter, arp_interval was reset to 0\n",
-			   arp_interval);
+		pr_warn("Warning: arp_interval module parameter (%d) specified without providing an arp_ip_target parameter, arp_interval was reset to 0\n",
+			arp_interval);
 		arp_interval = 0;
 	}
 
@@ -4255,8 +4251,8 @@ static int bond_check_params(struct bond_params *params)
 		/* currently, using a primary only makes sense
 		 * in active backup, TLB or ALB modes
 		 */
-		pr_warning("Warning: %s primary device specified but has no effect in %s mode\n",
-			   primary, bond_mode_name(bond_mode));
+		pr_warn("Warning: %s primary device specified but has no effect in %s mode\n",
+			primary, bond_mode_name(bond_mode));
 		primary = NULL;
 	}
 
@@ -4285,14 +4281,14 @@ static int bond_check_params(struct bond_params *params)
 		}
 		fail_over_mac_value = valptr->value;
 		if (bond_mode != BOND_MODE_ACTIVEBACKUP)
-			pr_warning("Warning: fail_over_mac only affects active-backup mode.\n");
+			pr_warn("Warning: fail_over_mac only affects active-backup mode\n");
 	} else {
 		fail_over_mac_value = BOND_FOM_NONE;
 	}
 
 	if (lp_interval == 0) {
-		pr_warning("Warning: ip_interval must be between 1 and %d, so it was reset to %d\n",
-			   INT_MAX, BOND_ALB_DEFAULT_LP_INTERVAL);
+		pr_warn("Warning: ip_interval must be between 1 and %d, so it was reset to %d\n",
+			INT_MAX, BOND_ALB_DEFAULT_LP_INTERVAL);
 		lp_interval = BOND_ALB_DEFAULT_LP_INTERVAL;
 	}
 
diff --git a/drivers/net/bonding/bond_procfs.c b/drivers/net/bonding/bond_procfs.c
index 3ac20e78eafc..f86fcc796757 100644
--- a/drivers/net/bonding/bond_procfs.c
+++ b/drivers/net/bonding/bond_procfs.c
@@ -254,8 +254,8 @@ void bond_create_proc_entry(struct bonding *bond)
 						    S_IRUGO, bn->proc_dir,
 						    &bond_info_fops, bond);
 		if (bond->proc_entry == NULL)
-			pr_warning("Warning: Cannot create /proc/net/%s/%s\n",
-				   DRV_NAME, bond_dev->name);
+			pr_warn("Warning: Cannot create /proc/net/%s/%s\n",
+				DRV_NAME, bond_dev->name);
 		else
 			memcpy(bond->proc_file_name, bond_dev->name, IFNAMSIZ);
 	}
@@ -281,8 +281,8 @@ void __net_init bond_create_proc_dir(struct bond_net *bn)
 	if (!bn->proc_dir) {
 		bn->proc_dir = proc_mkdir(DRV_NAME, bn->net->proc_net);
 		if (!bn->proc_dir)
-			pr_warning("Warning: cannot create /proc/net/%s\n",
-				   DRV_NAME);
+			pr_warn("Warning: cannot create /proc/net/%s\n",
+				DRV_NAME);
 	}
 }
 
-- 
cgit v1.2.2


From 90194264ceffdff809e625f54767f6f8c292a28e Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Sat, 15 Feb 2014 16:01:45 -0800
Subject: bonding: Neaten pr_<level>

Add missing terminating newlines.
Convert uses of pr_info to pr_cont in bond_check_params.
Standardize upper/lower case styles.
Typo fixes, remove unnecessary parentheses and periods.
Alignment neatening.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_3ad.c     |  11 ++--
 drivers/net/bonding/bond_main.c    | 103 ++++++++++++++++++-------------------
 drivers/net/bonding/bond_netlink.c |   6 +--
 drivers/net/bonding/bond_options.c | 102 +++++++++++++++++-------------------
 drivers/net/bonding/bond_procfs.c  |   2 +-
 drivers/net/bonding/bond_sysfs.c   |   8 +--
 6 files changed, 110 insertions(+), 122 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index cce1f1bf90b4..f6eda2d42dbe 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -1079,7 +1079,8 @@ static void ad_rx_machine(struct lacpdu *lacpdu, struct port *port)
 			/* detect loopback situation */
 			if (MAC_ADDRESS_EQUAL(&(lacpdu->actor_system),
 					      &(port->actor_system))) {
-				pr_err("%s: An illegal loopback occurred on adapter (%s).\nCheck the configuration to verify that all adapters are connected to 802.3ad compliant switch ports\n",
+				pr_err("%s: An illegal loopback occurred on adapter (%s)\n"
+				       "Check the configuration to verify that all adapters are connected to 802.3ad compliant switch ports\n",
 				       port->slave->bond->dev->name,
 				       port->slave->dev->name);
 				return;
@@ -1950,7 +1951,7 @@ void bond_3ad_unbind_slave(struct slave *slave)
 			 * new aggregator
 			 */
 			if ((new_aggregator) && ((!new_aggregator->lag_ports) || ((new_aggregator->lag_ports == port) && !new_aggregator->lag_ports->next_port_in_aggregator))) {
-				pr_debug("Some port(s) related to LAG %d - replaceing with LAG %d\n",
+				pr_debug("Some port(s) related to LAG %d - replacing with LAG %d\n",
 					 aggregator->aggregator_identifier,
 					 new_aggregator->aggregator_identifier);
 
@@ -2300,9 +2301,9 @@ void bond_3ad_handle_link_change(struct slave *slave, char link)
 		port->actor_oper_port_key = (port->actor_admin_port_key &=
 					     ~AD_SPEED_KEY_BITS);
 	}
-	pr_debug("Port %d changed link status to %s",
-		port->actor_port_number,
-		(link == BOND_LINK_UP) ? "UP" : "DOWN");
+	pr_debug("Port %d changed link status to %s\n",
+		 port->actor_port_number,
+		 link == BOND_LINK_UP ? "UP" : "DOWN");
 	/* there is no need to reselect a new aggregator, just signal the
 	 * state machines to reinitialize
 	 */
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 1d4dfc9f649a..90994ed31eb4 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -802,7 +802,7 @@ void bond_change_active_slave(struct bonding *bond, struct slave *new_active)
 
 		if (new_active->link == BOND_LINK_BACK) {
 			if (USES_PRIMARY(bond->params.mode)) {
-				pr_info("%s: making interface %s the new active one %d ms earlier.\n",
+				pr_info("%s: making interface %s the new active one %d ms earlier\n",
 					bond->dev->name, new_active->dev->name,
 					(bond->params.updelay - new_active->delay) * bond->params.miimon);
 			}
@@ -817,7 +817,7 @@ void bond_change_active_slave(struct bonding *bond, struct slave *new_active)
 				bond_alb_handle_link_change(bond, new_active, BOND_LINK_UP);
 		} else {
 			if (USES_PRIMARY(bond->params.mode)) {
-				pr_info("%s: making interface %s the new active one.\n",
+				pr_info("%s: making interface %s the new active one\n",
 					bond->dev->name, new_active->dev->name);
 			}
 		}
@@ -906,7 +906,7 @@ void bond_select_active_slave(struct bonding *bond)
 			pr_info("%s: first active interface up!\n",
 				bond->dev->name);
 		} else {
-			pr_info("%s: now running without any active interface !\n",
+			pr_info("%s: now running without any active interface!\n",
 				bond->dev->name);
 		}
 	}
@@ -1189,7 +1189,7 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 
 	/* already enslaved */
 	if (slave_dev->flags & IFF_SLAVE) {
-		pr_debug("Error, Device was already enslaved\n");
+		pr_debug("Error: Device was already enslaved\n");
 		return -EBUSY;
 	}
 
@@ -1217,7 +1217,7 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 	 * enslaving it; the old ifenslave will not.
 	 */
 	if ((slave_dev->flags & IFF_UP)) {
-		pr_err("%s is up. This may be due to an out of date ifenslave.\n",
+		pr_err("%s is up - this may be due to an out of date ifenslave\n",
 		       slave_dev->name);
 		res = -EPERM;
 		goto err_undo_flags;
@@ -1261,24 +1261,23 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 						 bond_dev);
 		}
 	} else if (bond_dev->type != slave_dev->type) {
-		pr_err("%s ether type (%d) is different from other slaves (%d), can not enslave it.\n",
-		       slave_dev->name,
-		       slave_dev->type, bond_dev->type);
+		pr_err("%s ether type (%d) is different from other slaves (%d), can not enslave it\n",
+		       slave_dev->name, slave_dev->type, bond_dev->type);
 		res = -EINVAL;
 		goto err_undo_flags;
 	}
 
 	if (slave_ops->ndo_set_mac_address == NULL) {
 		if (!bond_has_slaves(bond)) {
-			pr_warn("%s: Warning: The first slave device specified does not support setting the MAC address.\n",
+			pr_warn("%s: Warning: The first slave device specified does not support setting the MAC address\n",
 				bond_dev->name);
 			if (bond->params.mode == BOND_MODE_ACTIVEBACKUP) {
 				bond->params.fail_over_mac = BOND_FOM_ACTIVE;
-				pr_warn("%s: Setting fail_over_mac to active for active-backup mode.\n",
+				pr_warn("%s: Setting fail_over_mac to active for active-backup mode\n",
 					bond_dev->name);
 			}
 		} else if (bond->params.fail_over_mac != BOND_FOM_ACTIVE) {
-			pr_err("%s: Error: The slave device specified does not support setting the MAC address, but fail_over_mac is not set to active.\n",
+			pr_err("%s: Error: The slave device specified does not support setting the MAC address, but fail_over_mac is not set to active\n",
 			       bond_dev->name);
 			res = -EOPNOTSUPP;
 			goto err_undo_flags;
@@ -1450,8 +1449,8 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 	if (new_slave->link != BOND_LINK_DOWN)
 		new_slave->jiffies = jiffies;
 	pr_debug("Initial state of slave_dev is BOND_LINK_%s\n",
-		new_slave->link == BOND_LINK_DOWN ? "DOWN" :
-			(new_slave->link == BOND_LINK_UP ? "UP" : "BACK"));
+		 new_slave->link == BOND_LINK_DOWN ? "DOWN" :
+		 (new_slave->link == BOND_LINK_UP ? "UP" : "BACK"));
 
 	if (USES_PRIMARY(bond->params.mode) && bond->params.primary[0]) {
 		/* if there is a primary slave, remember it */
@@ -1510,9 +1509,8 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 	slave_dev->npinfo = bond->dev->npinfo;
 	if (slave_dev->npinfo) {
 		if (slave_enable_netpoll(new_slave)) {
-			pr_info("Error, %s: master_dev is using netpoll, "
-				 "but new slave device does not support netpoll.\n",
-				 bond_dev->name);
+			pr_info("Error, %s: master_dev is using netpoll, but new slave device does not support netpoll\n",
+				bond_dev->name);
 			res = -EBUSY;
 			goto err_detach;
 		}
@@ -1548,10 +1546,10 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 		write_unlock_bh(&bond->curr_slave_lock);
 	}
 
-	pr_info("%s: enslaving %s as a%s interface with a%s link.\n",
+	pr_info("%s: Enslaving %s as %s interface with %s link\n",
 		bond_dev->name, slave_dev->name,
-		bond_is_active_slave(new_slave) ? "n active" : " backup",
-		new_slave->link != BOND_LINK_DOWN ? "n up" : " down");
+		bond_is_active_slave(new_slave) ? "an active" : "a backup",
+		new_slave->link != BOND_LINK_DOWN ? "an up" : "a down");
 
 	/* enslave is successful */
 	return 0;
@@ -1634,7 +1632,7 @@ static int __bond_release_one(struct net_device *bond_dev,
 	/* slave is not a slave or master is not master of this slave */
 	if (!(slave_dev->flags & IFF_SLAVE) ||
 	    !netdev_has_upper_dev(slave_dev, bond_dev)) {
-		pr_err("%s: Error: cannot release %s.\n",
+		pr_err("%s: Error: cannot release %s\n",
 		       bond_dev->name, slave_dev->name);
 		return -EINVAL;
 	}
@@ -1668,7 +1666,7 @@ static int __bond_release_one(struct net_device *bond_dev,
 
 	write_unlock_bh(&bond->lock);
 
-	pr_info("%s: releasing %s interface %s\n",
+	pr_info("%s: Releasing %s interface %s\n",
 		bond_dev->name,
 		bond_is_active_slave(slave) ? "active" : "backup",
 		slave_dev->name);
@@ -1681,10 +1679,10 @@ static int __bond_release_one(struct net_device *bond_dev,
 		     bond->params.mode != BOND_MODE_ACTIVEBACKUP)) {
 		if (ether_addr_equal_64bits(bond_dev->dev_addr, slave->perm_hwaddr) &&
 		    bond_has_slaves(bond))
-			pr_warn("%s: Warning: the permanent HWaddr of %s - %pM - is still in use by %s. Set the HWaddr of %s to a different address to avoid conflicts.\n",
-				   bond_dev->name, slave_dev->name,
-				   slave->perm_hwaddr,
-				   bond_dev->name, slave_dev->name);
+			pr_warn("%s: Warning: the permanent HWaddr of %s - %pM - is still in use by %s - set the HWaddr of %s to a different address to avoid conflicts\n",
+				bond_dev->name, slave_dev->name,
+				slave->perm_hwaddr,
+				bond_dev->name, slave_dev->name);
 	}
 
 	if (bond->primary_slave == slave)
@@ -1743,7 +1741,7 @@ static int __bond_release_one(struct net_device *bond_dev,
 	bond_compute_features(bond);
 	if (!(bond_dev->features & NETIF_F_VLAN_CHALLENGED) &&
 	    (old_features & NETIF_F_VLAN_CHALLENGED))
-		pr_info("%s: last VLAN challenged slave %s left bond %s. VLAN blocking is removed\n",
+		pr_info("%s: last VLAN challenged slave %s left bond %s - VLAN blocking is removed\n",
 			bond_dev->name, slave_dev->name, bond_dev->name);
 
 	/* must do this from outside any spinlocks */
@@ -1811,7 +1809,7 @@ static int  bond_release_and_destroy(struct net_device *bond_dev,
 	ret = bond_release(bond_dev, slave_dev);
 	if (ret == 0 && !bond_has_slaves(bond)) {
 		bond_dev->priv_flags |= IFF_DISABLE_NETPOLL;
-		pr_info("%s: destroying bond %s.\n",
+		pr_info("%s: Destroying bond %s\n",
 			bond_dev->name, bond_dev->name);
 		unregister_netdevice(bond_dev);
 	}
@@ -1880,7 +1878,7 @@ static int bond_miimon_inspect(struct bonding *bond)
 			slave->link = BOND_LINK_FAIL;
 			slave->delay = bond->params.downdelay;
 			if (slave->delay) {
-				pr_info("%s: link status down for %sinterface %s, disabling it in %d ms.\n",
+				pr_info("%s: link status down for %sinterface %s, disabling it in %d ms\n",
 					bond->dev->name,
 					(bond->params.mode ==
 					 BOND_MODE_ACTIVEBACKUP) ?
@@ -1897,7 +1895,7 @@ static int bond_miimon_inspect(struct bonding *bond)
 				 */
 				slave->link = BOND_LINK_UP;
 				slave->jiffies = jiffies;
-				pr_info("%s: link status up again after %d ms for interface %s.\n",
+				pr_info("%s: link status up again after %d ms for interface %s\n",
 					bond->dev->name,
 					(bond->params.downdelay - slave->delay) *
 					bond->params.miimon,
@@ -1922,7 +1920,7 @@ static int bond_miimon_inspect(struct bonding *bond)
 			slave->delay = bond->params.updelay;
 
 			if (slave->delay) {
-				pr_info("%s: link status up for interface %s, enabling it in %d ms.\n",
+				pr_info("%s: link status up for interface %s, enabling it in %d ms\n",
 					bond->dev->name, slave->dev->name,
 					ignore_updelay ? 0 :
 					bond->params.updelay *
@@ -1932,7 +1930,7 @@ static int bond_miimon_inspect(struct bonding *bond)
 		case BOND_LINK_BACK:
 			if (!link_state) {
 				slave->link = BOND_LINK_DOWN;
-				pr_info("%s: link status down again after %d ms for interface %s.\n",
+				pr_info("%s: link status down again after %d ms for interface %s\n",
 					bond->dev->name,
 					(bond->params.updelay - slave->delay) *
 					bond->params.miimon,
@@ -1984,7 +1982,7 @@ static void bond_miimon_commit(struct bonding *bond)
 				bond_set_backup_slave(slave);
 			}
 
-			pr_info("%s: link status definitely up for interface %s, %u Mbps %s duplex.\n",
+			pr_info("%s: link status definitely up for interface %s, %u Mbps %s duplex\n",
 				bond->dev->name, slave->dev->name,
 				slave->speed == SPEED_UNKNOWN ? 0 : slave->speed,
 				slave->duplex ? "full" : "half");
@@ -2132,8 +2130,8 @@ static void bond_arp_send(struct net_device *slave_dev, int arp_op, __be32 dest_
 {
 	struct sk_buff *skb;
 
-	pr_debug("arp %d on slave %s: dst %pI4 src %pI4 vid %d\n", arp_op,
-		 slave_dev->name, &dest_ip, &src_ip, vlan_id);
+	pr_debug("arp %d on slave %s: dst %pI4 src %pI4 vid %d\n",
+		 arp_op, slave_dev->name, &dest_ip, &src_ip, vlan_id);
 
 	skb = arp_create(arp_op, ETH_P_ARP, dest_ip, slave_dev, src_ip,
 			 NULL, slave_dev->dev_addr, NULL);
@@ -2385,7 +2383,7 @@ static void bond_loadbalance_arp_mon(struct work_struct *work)
 				 * is closed.
 				 */
 				if (!oldcurrent) {
-					pr_info("%s: link status definitely up for interface %s, ",
+					pr_info("%s: link status definitely up for interface %s\n",
 						bond->dev->name,
 						slave->dev->name);
 					do_failover = 1;
@@ -2411,9 +2409,8 @@ static void bond_loadbalance_arp_mon(struct work_struct *work)
 				if (slave->link_failure_count < UINT_MAX)
 					slave->link_failure_count++;
 
-				pr_info("%s: interface %s is now down.\n",
-					bond->dev->name,
-					slave->dev->name);
+				pr_info("%s: interface %s is now down\n",
+					bond->dev->name, slave->dev->name);
 
 				if (slave == oldcurrent)
 					do_failover = 1;
@@ -2562,7 +2559,7 @@ static void bond_ab_arp_commit(struct bonding *bond)
 					bond->current_arp_slave = NULL;
 				}
 
-				pr_info("%s: link status definitely up for interface %s.\n",
+				pr_info("%s: link status definitely up for interface %s\n",
 					bond->dev->name, slave->dev->name);
 
 				if (!bond->curr_active_slave ||
@@ -2675,7 +2672,7 @@ static bool bond_ab_arp_probe(struct bonding *bond)
 
 			bond_set_slave_inactive_flags(slave);
 
-			pr_info("%s: backup interface %s is now down.\n",
+			pr_info("%s: backup interface %s is now down\n",
 				bond->dev->name, slave->dev->name);
 		}
 		if (slave == curr_arp_slave)
@@ -2861,9 +2858,9 @@ static int bond_slave_netdev_event(unsigned long event,
 			break;
 		}
 
-		pr_info("%s: Primary slave changed to %s, reselecting active slave.\n",
-			bond->dev->name, bond->primary_slave ? slave_dev->name :
-							       "none");
+		pr_info("%s: Primary slave changed to %s, reselecting active slave\n",
+			bond->dev->name,
+			bond->primary_slave ? slave_dev->name : "none");
 		write_lock_bh(&bond->curr_slave_lock);
 		bond_select_active_slave(bond);
 		write_unlock_bh(&bond->curr_slave_lock);
@@ -2896,8 +2893,7 @@ static int bond_netdev_event(struct notifier_block *this,
 	struct net_device *event_dev = netdev_notifier_info_to_dev(ptr);
 
 	pr_debug("event_dev: %s, event: %lx\n",
-		 event_dev ? event_dev->name : "None",
-		 event);
+		 event_dev ? event_dev->name : "None", event);
 
 	if (!(event_dev->priv_flags & IFF_BONDING))
 		return NOTIFY_DONE;
@@ -3352,8 +3348,8 @@ static int bond_change_mtu(struct net_device *bond_dev, int new_mtu)
 	struct list_head *iter;
 	int res = 0;
 
-	pr_debug("bond=%p, name=%s, new_mtu=%d\n", bond,
-		 (bond_dev ? bond_dev->name : "None"), new_mtu);
+	pr_debug("bond=%p, name=%s, new_mtu=%d\n",
+		 bond, bond_dev ? bond_dev->name : "None", new_mtu);
 
 	/* Can't hold bond->lock with bh disabled here since
 	 * some base drivers panic. On the other hand we can't
@@ -3372,8 +3368,7 @@ static int bond_change_mtu(struct net_device *bond_dev, int new_mtu)
 
 	bond_for_each_slave(bond, slave, iter) {
 		pr_debug("s %p c_m %p\n",
-			 slave,
-			 slave->dev->netdev_ops->ndo_change_mtu);
+			 slave, slave->dev->netdev_ops->ndo_change_mtu);
 
 		res = dev_set_mtu(slave->dev, new_mtu);
 
@@ -3927,7 +3922,7 @@ static void bond_uninit(struct net_device *bond_dev)
 	/* Release the bonded slaves */
 	bond_for_each_slave(bond, slave, iter)
 		__bond_release_one(bond_dev, slave->dev, true);
-	pr_info("%s: released all slaves\n", bond_dev->name);
+	pr_info("%s: Released all slaves\n", bond_dev->name);
 
 	list_del(&bond->bond_list);
 
@@ -4005,7 +4000,7 @@ static int bond_check_params(struct bond_params *params)
 		if ((bond_mode != BOND_MODE_XOR) &&
 		    (bond_mode != BOND_MODE_8023AD)) {
 			pr_info("xmit_hash_policy param is irrelevant in mode %s\n",
-			       bond_mode_name(bond_mode));
+				bond_mode_name(bond_mode));
 		} else {
 			bond_opt_initstr(&newval, xmit_hash_policy);
 			valptr = bond_opt_parse(bond_opt_get(BOND_OPT_XMIT_HASH),
@@ -4236,15 +4231,15 @@ static int bond_check_params(struct bond_params *params)
 			arp_interval, valptr->string, arp_ip_count);
 
 		for (i = 0; i < arp_ip_count; i++)
-			pr_info(" %s", arp_ip_target[i]);
+			pr_cont(" %s", arp_ip_target[i]);
 
-		pr_info("\n");
+		pr_cont("\n");
 
 	} else if (max_bonds) {
 		/* miimon and arp_interval not set, we need one so things
 		 * work as expected, see bonding.txt for details
 		 */
-		pr_debug("Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details.\n");
+		pr_debug("Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details\n");
 	}
 
 	if (primary && !USES_PRIMARY(bond_mode)) {
diff --git a/drivers/net/bonding/bond_netlink.c b/drivers/net/bonding/bond_netlink.c
index 70651f8e8e3b..20659b114f24 100644
--- a/drivers/net/bonding/bond_netlink.c
+++ b/drivers/net/bonding/bond_netlink.c
@@ -181,7 +181,7 @@ static int bond_changelink(struct net_device *bond_dev,
 		int arp_interval = nla_get_u32(data[IFLA_BOND_ARP_INTERVAL]);
 
 		if (arp_interval && miimon) {
-			pr_err("%s: ARP monitoring cannot be used with MII monitoring.\n",
+			pr_err("%s: ARP monitoring cannot be used with MII monitoring\n",
 			       bond->dev->name);
 			return -EINVAL;
 		}
@@ -207,7 +207,7 @@ static int bond_changelink(struct net_device *bond_dev,
 			i++;
 		}
 		if (i == 0 && bond->params.arp_interval)
-			pr_warn("%s: removing last arp target with arp_interval on\n",
+			pr_warn("%s: Removing last arp target with arp_interval on\n",
 				bond->dev->name);
 		if (err)
 			return err;
@@ -216,7 +216,7 @@ static int bond_changelink(struct net_device *bond_dev,
 		int arp_validate = nla_get_u32(data[IFLA_BOND_ARP_VALIDATE]);
 
 		if (arp_validate && miimon) {
-			pr_err("%s: ARP validating cannot be used with MII monitoring.\n",
+			pr_err("%s: ARP validating cannot be used with MII monitoring\n",
 			       bond->dev->name);
 			return -EINVAL;
 		}
diff --git a/drivers/net/bonding/bond_options.c b/drivers/net/bonding/bond_options.c
index 832d6e90b1b9..f3eb44d2e231 100644
--- a/drivers/net/bonding/bond_options.c
+++ b/drivers/net/bonding/bond_options.c
@@ -473,10 +473,10 @@ static void bond_opt_error_interpret(struct bonding *bond,
 				p = strchr(val->string, '\n');
 				if (p)
 					*p = '\0';
-				pr_err("%s: option %s: invalid value (%s).\n",
+				pr_err("%s: option %s: invalid value (%s)\n",
 				       bond->dev->name, opt->name, val->string);
 			} else {
-				pr_err("%s: option %s: invalid value (%llu).\n",
+				pr_err("%s: option %s: invalid value (%llu)\n",
 				       bond->dev->name, opt->name, val->value);
 			}
 		}
@@ -484,7 +484,7 @@ static void bond_opt_error_interpret(struct bonding *bond,
 		maxval = bond_opt_get_flags(opt, BOND_VALFLAG_MAX);
 		if (!maxval)
 			break;
-		pr_err("%s: option %s: allowed values %llu - %llu.\n",
+		pr_err("%s: option %s: allowed values %llu - %llu\n",
 		       bond->dev->name, opt->name, minval ? minval->value : 0,
 		       maxval->value);
 		break;
@@ -492,11 +492,11 @@ static void bond_opt_error_interpret(struct bonding *bond,
 		bond_opt_dep_print(bond, opt);
 		break;
 	case -ENOTEMPTY:
-		pr_err("%s: option %s: unable to set because the bond device has slaves.\n",
+		pr_err("%s: option %s: unable to set because the bond device has slaves\n",
 		       bond->dev->name, opt->name);
 		break;
 	case -EBUSY:
-		pr_err("%s: option %s: unable to set because the bond device is up.\n",
+		pr_err("%s: option %s: unable to set because the bond device is up\n",
 		       bond->dev->name, opt->name);
 		break;
 	default:
@@ -589,7 +589,7 @@ int bond_option_mode_set(struct bonding *bond, struct bond_opt_value *newval)
 		bond->params.arp_interval = 0;
 		/* set miimon to default value */
 		bond->params.miimon = BOND_DEFAULT_MIIMON;
-		pr_info("%s: Setting MII monitoring interval to %d.\n",
+		pr_info("%s: Setting MII monitoring interval to %d\n",
 			bond->dev->name, bond->params.miimon);
 	}
 
@@ -636,13 +636,13 @@ int bond_option_active_slave_set(struct bonding *bond,
 
 	if (slave_dev) {
 		if (!netif_is_bond_slave(slave_dev)) {
-			pr_err("Device %s is not bonding slave.\n",
+			pr_err("Device %s is not bonding slave\n",
 			       slave_dev->name);
 			return -EINVAL;
 		}
 
 		if (bond->dev != netdev_master_upper_dev_get(slave_dev)) {
-			pr_err("%s: Device %s is not our slave.\n",
+			pr_err("%s: Device %s is not our slave\n",
 			       bond->dev->name, slave_dev->name);
 			return -EINVAL;
 		}
@@ -653,8 +653,7 @@ int bond_option_active_slave_set(struct bonding *bond,
 
 	/* check to see if we are clearing active */
 	if (!slave_dev) {
-		pr_info("%s: Clearing current active slave.\n",
-		bond->dev->name);
+		pr_info("%s: Clearing current active slave\n", bond->dev->name);
 		rcu_assign_pointer(bond->curr_active_slave, NULL);
 		bond_select_active_slave(bond);
 	} else {
@@ -665,16 +664,16 @@ int bond_option_active_slave_set(struct bonding *bond,
 
 		if (new_active == old_active) {
 			/* do nothing */
-			pr_info("%s: %s is already the current active slave.\n",
+			pr_info("%s: %s is already the current active slave\n",
 				bond->dev->name, new_active->dev->name);
 		} else {
 			if (old_active && (new_active->link == BOND_LINK_UP) &&
 			    IS_UP(new_active->dev)) {
-				pr_info("%s: Setting %s as active slave.\n",
+				pr_info("%s: Setting %s as active slave\n",
 					bond->dev->name, new_active->dev->name);
 				bond_change_active_slave(bond, new_active);
 			} else {
-				pr_err("%s: Could not set %s as active slave; either %s is down or the link is down.\n",
+				pr_err("%s: Could not set %s as active slave; either %s is down or the link is down\n",
 				       bond->dev->name, new_active->dev->name,
 				       new_active->dev->name);
 				ret = -EINVAL;
@@ -690,19 +689,19 @@ int bond_option_active_slave_set(struct bonding *bond,
 
 int bond_option_miimon_set(struct bonding *bond, struct bond_opt_value *newval)
 {
-	pr_info("%s: Setting MII monitoring interval to %llu.\n",
+	pr_info("%s: Setting MII monitoring interval to %llu\n",
 		bond->dev->name, newval->value);
 	bond->params.miimon = newval->value;
 	if (bond->params.updelay)
-		pr_info("%s: Note: Updating updelay (to %d) since it is a multiple of the miimon value.\n",
+		pr_info("%s: Note: Updating updelay (to %d) since it is a multiple of the miimon value\n",
 			bond->dev->name,
 			bond->params.updelay * bond->params.miimon);
 	if (bond->params.downdelay)
-		pr_info("%s: Note: Updating downdelay (to %d) since it is a multiple of the miimon value.\n",
+		pr_info("%s: Note: Updating downdelay (to %d) since it is a multiple of the miimon value\n",
 			bond->dev->name,
 			bond->params.downdelay * bond->params.miimon);
 	if (newval->value && bond->params.arp_interval) {
-		pr_info("%s: MII monitoring cannot be used with ARP monitoring. Disabling ARP monitoring...\n",
+		pr_info("%s: MII monitoring cannot be used with ARP monitoring - disabling ARP monitoring...\n",
 			bond->dev->name);
 		bond->params.arp_interval = 0;
 		if (bond->params.arp_validate)
@@ -742,9 +741,8 @@ int bond_option_updelay_set(struct bonding *bond, struct bond_opt_value *newval)
 			bond->params.miimon);
 	}
 	bond->params.updelay = value / bond->params.miimon;
-	pr_info("%s: Setting up delay to %d.\n",
-		bond->dev->name,
-		bond->params.updelay * bond->params.miimon);
+	pr_info("%s: Setting up delay to %d\n",
+		bond->dev->name, bond->params.updelay * bond->params.miimon);
 
 	return 0;
 }
@@ -767,9 +765,8 @@ int bond_option_downdelay_set(struct bonding *bond,
 			bond->params.miimon);
 	}
 	bond->params.downdelay = value / bond->params.miimon;
-	pr_info("%s: Setting down delay to %d.\n",
-		bond->dev->name,
-		bond->params.downdelay * bond->params.miimon);
+	pr_info("%s: Setting down delay to %d\n",
+		bond->dev->name, bond->params.downdelay * bond->params.miimon);
 
 	return 0;
 }
@@ -777,7 +774,7 @@ int bond_option_downdelay_set(struct bonding *bond,
 int bond_option_use_carrier_set(struct bonding *bond,
 				struct bond_opt_value *newval)
 {
-	pr_info("%s: Setting use_carrier to %llu.\n",
+	pr_info("%s: Setting use_carrier to %llu\n",
 		bond->dev->name, newval->value);
 	bond->params.use_carrier = newval->value;
 
@@ -787,17 +784,17 @@ int bond_option_use_carrier_set(struct bonding *bond,
 int bond_option_arp_interval_set(struct bonding *bond,
 				 struct bond_opt_value *newval)
 {
-	pr_info("%s: Setting ARP monitoring interval to %llu.\n",
+	pr_info("%s: Setting ARP monitoring interval to %llu\n",
 		bond->dev->name, newval->value);
 	bond->params.arp_interval = newval->value;
 	if (newval->value) {
 		if (bond->params.miimon) {
-			pr_info("%s: ARP monitoring cannot be used with MII monitoring. %s Disabling MII monitoring.\n",
+			pr_info("%s: ARP monitoring cannot be used with MII monitoring. %s Disabling MII monitoring\n",
 				bond->dev->name, bond->dev->name);
 			bond->params.miimon = 0;
 		}
 		if (!bond->params.arp_targets[0])
-			pr_info("%s: ARP monitoring has been set up, but no ARP targets have been specified.\n",
+			pr_info("%s: ARP monitoring has been set up, but no ARP targets have been specified\n",
 				bond->dev->name);
 	}
 	if (bond->dev->flags & IFF_UP) {
@@ -856,12 +853,11 @@ static int _bond_option_arp_ip_target_add(struct bonding *bond, __be32 target)
 
 	ind = bond_get_targets_ip(targets, 0); /* first free slot */
 	if (ind == -1) {
-		pr_err("%s: ARP target table is full!\n",
-		       bond->dev->name);
+		pr_err("%s: ARP target table is full!\n", bond->dev->name);
 		return -EINVAL;
 	}
 
-	pr_info("%s: adding ARP target %pI4.\n", bond->dev->name, &target);
+	pr_info("%s: Adding ARP target %pI4\n", bond->dev->name, &target);
 
 	_bond_options_arp_ip_target_set(bond, ind, target, jiffies);
 
@@ -896,17 +892,16 @@ int bond_option_arp_ip_target_rem(struct bonding *bond, __be32 target)
 
 	ind = bond_get_targets_ip(targets, target);
 	if (ind == -1) {
-		pr_err("%s: unable to remove nonexistent ARP target %pI4.\n",
+		pr_err("%s: unable to remove nonexistent ARP target %pI4\n",
 		       bond->dev->name, &target);
 		return -EINVAL;
 	}
 
 	if (ind == 0 && !targets[1] && bond->params.arp_interval)
-		pr_warn("%s: removing last arp target with arp_interval on\n",
+		pr_warn("%s: Removing last arp target with arp_interval on\n",
 			bond->dev->name);
 
-	pr_info("%s: removing ARP target %pI4.\n", bond->dev->name,
-		&target);
+	pr_info("%s: Removing ARP target %pI4\n", bond->dev->name, &target);
 
 	/* not to race with bond_arp_rcv */
 	write_lock_bh(&bond->lock);
@@ -954,7 +949,7 @@ int bond_option_arp_ip_targets_set(struct bonding *bond,
 		else if (newval->string[0] == '-')
 			ret = bond_option_arp_ip_target_rem(bond, target);
 		else
-			pr_err("no command found in arp_ip_targets file for bond %s. Use +<addr> or -<addr>.\n",
+			pr_err("no command found in arp_ip_targets file for bond %s - use +<addr> or -<addr>\n",
 			       bond->dev->name);
 	} else {
 		target = newval->value;
@@ -967,7 +962,7 @@ int bond_option_arp_ip_targets_set(struct bonding *bond,
 int bond_option_arp_validate_set(struct bonding *bond,
 				 struct bond_opt_value *newval)
 {
-	pr_info("%s: setting arp_validate to %s (%llu).\n",
+	pr_info("%s: Setting arp_validate to %s (%llu)\n",
 		bond->dev->name, newval->string, newval->value);
 
 	if (bond->dev->flags & IFF_UP) {
@@ -984,7 +979,7 @@ int bond_option_arp_validate_set(struct bonding *bond,
 int bond_option_arp_all_targets_set(struct bonding *bond,
 				    struct bond_opt_value *newval)
 {
-	pr_info("%s: setting arp_all_targets to %s (%llu).\n",
+	pr_info("%s: Setting arp_all_targets to %s (%llu)\n",
 		bond->dev->name, newval->string, newval->value);
 	bond->params.arp_all_targets = newval->value;
 
@@ -1006,8 +1001,7 @@ int bond_option_primary_set(struct bonding *bond, struct bond_opt_value *newval)
 		*p = '\0';
 	/* check to see if we are clearing primary */
 	if (!strlen(primary)) {
-		pr_info("%s: Setting primary slave to None.\n",
-			bond->dev->name);
+		pr_info("%s: Setting primary slave to None\n", bond->dev->name);
 		bond->primary_slave = NULL;
 		memset(bond->params.primary, 0, sizeof(bond->params.primary));
 		bond_select_active_slave(bond);
@@ -1016,7 +1010,7 @@ int bond_option_primary_set(struct bonding *bond, struct bond_opt_value *newval)
 
 	bond_for_each_slave(bond, slave, iter) {
 		if (strncmp(slave->dev->name, primary, IFNAMSIZ) == 0) {
-			pr_info("%s: Setting %s as primary slave.\n",
+			pr_info("%s: Setting %s as primary slave\n",
 				bond->dev->name, slave->dev->name);
 			bond->primary_slave = slave;
 			strcpy(bond->params.primary, slave->dev->name);
@@ -1026,15 +1020,14 @@ int bond_option_primary_set(struct bonding *bond, struct bond_opt_value *newval)
 	}
 
 	if (bond->primary_slave) {
-		pr_info("%s: Setting primary slave to None.\n",
-			bond->dev->name);
+		pr_info("%s: Setting primary slave to None\n", bond->dev->name);
 		bond->primary_slave = NULL;
 		bond_select_active_slave(bond);
 	}
 	strncpy(bond->params.primary, primary, IFNAMSIZ);
 	bond->params.primary[IFNAMSIZ - 1] = 0;
 
-	pr_info("%s: Recording %s as primary, but it has not been enslaved to %s yet.\n",
+	pr_info("%s: Recording %s as primary, but it has not been enslaved to %s yet\n",
 		bond->dev->name, primary, bond->dev->name);
 
 out:
@@ -1048,7 +1041,7 @@ out:
 int bond_option_primary_reselect_set(struct bonding *bond,
 				     struct bond_opt_value *newval)
 {
-	pr_info("%s: setting primary_reselect to %s (%llu).\n",
+	pr_info("%s: Setting primary_reselect to %s (%llu)\n",
 		bond->dev->name, newval->string, newval->value);
 	bond->params.primary_reselect = newval->value;
 
@@ -1064,7 +1057,7 @@ int bond_option_primary_reselect_set(struct bonding *bond,
 int bond_option_fail_over_mac_set(struct bonding *bond,
 				  struct bond_opt_value *newval)
 {
-	pr_info("%s: Setting fail_over_mac to %s (%llu).\n",
+	pr_info("%s: Setting fail_over_mac to %s (%llu)\n",
 		bond->dev->name, newval->string, newval->value);
 	bond->params.fail_over_mac = newval->value;
 
@@ -1074,7 +1067,7 @@ int bond_option_fail_over_mac_set(struct bonding *bond,
 int bond_option_xmit_hash_policy_set(struct bonding *bond,
 				     struct bond_opt_value *newval)
 {
-	pr_info("%s: setting xmit hash policy to %s (%llu).\n",
+	pr_info("%s: Setting xmit hash policy to %s (%llu)\n",
 		bond->dev->name, newval->string, newval->value);
 	bond->params.xmit_policy = newval->value;
 
@@ -1084,7 +1077,7 @@ int bond_option_xmit_hash_policy_set(struct bonding *bond,
 int bond_option_resend_igmp_set(struct bonding *bond,
 				struct bond_opt_value *newval)
 {
-	pr_info("%s: Setting resend_igmp to %llu.\n",
+	pr_info("%s: Setting resend_igmp to %llu\n",
 		bond->dev->name, newval->value);
 	bond->params.resend_igmp = newval->value;
 
@@ -1158,7 +1151,7 @@ int bond_option_pps_set(struct bonding *bond, struct bond_opt_value *newval)
 int bond_option_lacp_rate_set(struct bonding *bond,
 			      struct bond_opt_value *newval)
 {
-	pr_info("%s: Setting LACP rate to %s (%llu).\n",
+	pr_info("%s: Setting LACP rate to %s (%llu)\n",
 		bond->dev->name, newval->string, newval->value);
 	bond->params.lacp_fast = newval->value;
 	bond_3ad_update_lacp_rate(bond);
@@ -1169,7 +1162,7 @@ int bond_option_lacp_rate_set(struct bonding *bond,
 int bond_option_ad_select_set(struct bonding *bond,
 			      struct bond_opt_value *newval)
 {
-	pr_info("%s: Setting ad_select to %s (%llu).\n",
+	pr_info("%s: Setting ad_select to %s (%llu)\n",
 		bond->dev->name, newval->string, newval->value);
 	bond->params.ad_select = newval->value;
 
@@ -1231,8 +1224,7 @@ out:
 	return ret;
 
 err_no_cmd:
-	pr_info("invalid input for queue_id set for %s.\n",
-		bond->dev->name);
+	pr_info("invalid input for queue_id set for %s\n", bond->dev->name);
 	ret = -EPERM;
 	goto out;
 
@@ -1253,7 +1245,7 @@ int bond_option_slaves_set(struct bonding *bond, struct bond_opt_value *newval)
 
 	dev = __dev_get_by_name(dev_net(bond->dev), ifname);
 	if (!dev) {
-		pr_info("%s: Interface %s does not exist!\n",
+		pr_info("%s: interface %s does not exist!\n",
 			bond->dev->name, ifname);
 		ret = -ENODEV;
 		goto out;
@@ -1261,12 +1253,12 @@ int bond_option_slaves_set(struct bonding *bond, struct bond_opt_value *newval)
 
 	switch (command[0]) {
 	case '+':
-		pr_info("%s: Adding slave %s.\n", bond->dev->name, dev->name);
+		pr_info("%s: Adding slave %s\n", bond->dev->name, dev->name);
 		ret = bond_enslave(bond->dev, dev);
 		break;
 
 	case '-':
-		pr_info("%s: Removing slave %s.\n", bond->dev->name, dev->name);
+		pr_info("%s: Removing slave %s\n", bond->dev->name, dev->name);
 		ret = bond_release(bond->dev, dev);
 		break;
 
@@ -1278,7 +1270,7 @@ out:
 	return ret;
 
 err_no_cmd:
-	pr_err("no command found in slaves file for bond %s. Use +ifname or -ifname.\n",
+	pr_err("no command found in slaves file for bond %s - use +ifname or -ifname\n",
 	       bond->dev->name);
 	ret = -EPERM;
 	goto out;
diff --git a/drivers/net/bonding/bond_procfs.c b/drivers/net/bonding/bond_procfs.c
index f86fcc796757..434df7360999 100644
--- a/drivers/net/bonding/bond_procfs.c
+++ b/drivers/net/bonding/bond_procfs.c
@@ -281,7 +281,7 @@ void __net_init bond_create_proc_dir(struct bond_net *bn)
 	if (!bn->proc_dir) {
 		bn->proc_dir = proc_mkdir(DRV_NAME, bn->net->proc_net);
 		if (!bn->proc_dir)
-			pr_warn("Warning: cannot create /proc/net/%s\n",
+			pr_warn("Warning: Cannot create /proc/net/%s\n",
 				DRV_NAME);
 	}
 }
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index 643fcc110299..225ee696db05 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -117,9 +117,9 @@ static ssize_t bonding_store_bonds(struct class *cls,
 		rv = bond_create(bn->net, ifname);
 		if (rv) {
 			if (rv == -EEXIST)
-				pr_info("%s already exists.\n", ifname);
+				pr_info("%s already exists\n", ifname);
 			else
-				pr_info("%s creation failed.\n", ifname);
+				pr_info("%s creation failed\n", ifname);
 			res = rv;
 		}
 	} else if (command[0] == '-') {
@@ -144,7 +144,7 @@ static ssize_t bonding_store_bonds(struct class *cls,
 	return res;
 
 err_no_cmd:
-	pr_err("no command found in bonding_masters. Use +ifname or -ifname.\n");
+	pr_err("no command found in bonding_masters - use +ifname or -ifname\n");
 	return -EPERM;
 }
 
@@ -1135,7 +1135,7 @@ int bond_create_sysfs(struct bond_net *bn)
 		/* Is someone being kinky and naming a device bonding_master? */
 		if (__dev_get_by_name(bn->net,
 				      class_attr_bonding_masters.attr.name))
-			pr_err("network device named %s already exists in sysfs",
+			pr_err("network device named %s already exists in sysfs\n",
 			       class_attr_bonding_masters.attr.name);
 		ret = 0;
 	}
-- 
cgit v1.2.2


From 2ea24f2ecfdca1039cf9a9dab92ac1769224fe92 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Sat, 15 Feb 2014 16:02:03 -0800
Subject: bonding: Convert c99 comments

Neatening only.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_3ad.h | 175 ++++++++++++++++++++---------------------
 1 file changed, 87 insertions(+), 88 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_3ad.h b/drivers/net/bonding/bond_3ad.h
index 13dc9d3c5e34..3b97fe487dca 100644
--- a/drivers/net/bonding/bond_3ad.h
+++ b/drivers/net/bonding/bond_3ad.h
@@ -28,7 +28,7 @@
 #include <linux/netdevice.h>
 #include <linux/if_ether.h>
 
-// General definitions
+/* General definitions */
 #define PKT_TYPE_LACPDU         cpu_to_be16(ETH_P_SLOW)
 #define AD_TIMER_INTERVAL       100 /*msec*/
 
@@ -47,54 +47,54 @@ enum {
 	BOND_AD_COUNT = 2,
 };
 
-// rx machine states(43.4.11 in the 802.3ad standard)
+/* rx machine states(43.4.11 in the 802.3ad standard) */
 typedef enum {
 	AD_RX_DUMMY,
-	AD_RX_INITIALIZE,     // rx Machine
-	AD_RX_PORT_DISABLED,  // rx Machine
-	AD_RX_LACP_DISABLED,  // rx Machine
-	AD_RX_EXPIRED,	      // rx Machine
-	AD_RX_DEFAULTED,      // rx Machine
-	AD_RX_CURRENT	      // rx Machine
+	AD_RX_INITIALIZE,	/* rx Machine */
+	AD_RX_PORT_DISABLED,	/* rx Machine */
+	AD_RX_LACP_DISABLED,	/* rx Machine */
+	AD_RX_EXPIRED,		/* rx Machine */
+	AD_RX_DEFAULTED,	/* rx Machine */
+	AD_RX_CURRENT		/* rx Machine */
 } rx_states_t;
 
-// periodic machine states(43.4.12 in the 802.3ad standard)
+/* periodic machine states(43.4.12 in the 802.3ad standard) */
 typedef enum {
 	AD_PERIODIC_DUMMY,
-	AD_NO_PERIODIC,	       // periodic machine
-	AD_FAST_PERIODIC,      // periodic machine
-	AD_SLOW_PERIODIC,      // periodic machine
-	AD_PERIODIC_TX	   // periodic machine
+	AD_NO_PERIODIC,		/* periodic machine */
+	AD_FAST_PERIODIC,	/* periodic machine */
+	AD_SLOW_PERIODIC,	/* periodic machine */
+	AD_PERIODIC_TX		/* periodic machine */
 } periodic_states_t;
 
-// mux machine states(43.4.13 in the 802.3ad standard)
+/* mux machine states(43.4.13 in the 802.3ad standard) */
 typedef enum {
 	AD_MUX_DUMMY,
-	AD_MUX_DETACHED,       // mux machine
-	AD_MUX_WAITING,	       // mux machine
-	AD_MUX_ATTACHED,       // mux machine
-	AD_MUX_COLLECTING_DISTRIBUTING // mux machine
+	AD_MUX_DETACHED,	/* mux machine */
+	AD_MUX_WAITING,		/* mux machine */
+	AD_MUX_ATTACHED,	/* mux machine */
+	AD_MUX_COLLECTING_DISTRIBUTING	/* mux machine */
 } mux_states_t;
 
-// tx machine states(43.4.15 in the 802.3ad standard)
+/* tx machine states(43.4.15 in the 802.3ad standard) */
 typedef enum {
 	AD_TX_DUMMY,
-	AD_TRANSMIT	   // tx Machine
+	AD_TRANSMIT		/* tx Machine */
 } tx_states_t;
 
-// rx indication types
+/* rx indication types */
 typedef enum {
-	AD_TYPE_LACPDU = 1,    // type lacpdu
-	AD_TYPE_MARKER	   // type marker
+	AD_TYPE_LACPDU = 1,	/* type lacpdu */
+	AD_TYPE_MARKER		/* type marker */
 } pdu_type_t;
 
-// rx marker indication types
+/* rx marker indication types */
 typedef enum {
-	AD_MARKER_INFORMATION_SUBTYPE = 1, // marker imformation subtype
-	AD_MARKER_RESPONSE_SUBTYPE     // marker response subtype
+	AD_MARKER_INFORMATION_SUBTYPE = 1,	/* marker imformation subtype */
+	AD_MARKER_RESPONSE_SUBTYPE		/* marker response subtype */
 } bond_marker_subtype_t;
 
-// timers types(43.4.9 in the 802.3ad standard)
+/* timers types(43.4.9 in the 802.3ad standard) */
 typedef enum {
 	AD_CURRENT_WHILE_TIMER,
 	AD_ACTOR_CHURN_TIMER,
@@ -105,35 +105,35 @@ typedef enum {
 
 #pragma pack(1)
 
-// Link Aggregation Control Protocol(LACP) data unit structure(43.4.2.2 in the 802.3ad standard)
+/* Link Aggregation Control Protocol(LACP) data unit structure(43.4.2.2 in the 802.3ad standard) */
 typedef struct lacpdu {
-	u8 subtype;		     // = LACP(= 0x01)
+	u8 subtype;		/* = LACP(= 0x01) */
 	u8 version_number;
-	u8 tlv_type_actor_info;	      // = actor information(type/length/value)
-	u8 actor_information_length; // = 20
+	u8 tlv_type_actor_info;	/* = actor information(type/length/value) */
+	u8 actor_information_length;	/* = 20 */
 	__be16 actor_system_priority;
 	struct mac_addr actor_system;
 	__be16 actor_key;
 	__be16 actor_port_priority;
 	__be16 actor_port;
 	u8 actor_state;
-	u8 reserved_3_1[3];	     // = 0
-	u8 tlv_type_partner_info;     // = partner information
-	u8 partner_information_length;	 // = 20
+	u8 reserved_3_1[3];		/* = 0 */
+	u8 tlv_type_partner_info;	/* = partner information */
+	u8 partner_information_length;	/* = 20 */
 	__be16 partner_system_priority;
 	struct mac_addr partner_system;
 	__be16 partner_key;
 	__be16 partner_port_priority;
 	__be16 partner_port;
 	u8 partner_state;
-	u8 reserved_3_2[3];	     // = 0
-	u8 tlv_type_collector_info;	  // = collector information
-	u8 collector_information_length; // = 16
+	u8 reserved_3_2[3];		/* = 0 */
+	u8 tlv_type_collector_info;	/* = collector information */
+	u8 collector_information_length;/* = 16 */
 	__be16 collector_max_delay;
 	u8 reserved_12[12];
-	u8 tlv_type_terminator;	     // = terminator
-	u8 terminator_length;	     // = 0
-	u8 reserved_50[50];	     // = 0
+	u8 tlv_type_terminator;		/* = terminator */
+	u8 terminator_length;		/* = 0 */
+	u8 reserved_50[50];		/* = 0 */
 } __packed lacpdu_t;
 
 typedef struct lacpdu_header {
@@ -141,20 +141,20 @@ typedef struct lacpdu_header {
 	struct lacpdu lacpdu;
 } __packed lacpdu_header_t;
 
-// Marker Protocol Data Unit(PDU) structure(43.5.3.2 in the 802.3ad standard)
+/* Marker Protocol Data Unit(PDU) structure(43.5.3.2 in the 802.3ad standard) */
 typedef struct bond_marker {
-	u8 subtype;		 //  = 0x02  (marker PDU)
-	u8 version_number;	 //  = 0x01
-	u8 tlv_type;		 //  = 0x01  (marker information)
-	//  = 0x02  (marker response information)
-	u8 marker_length;	 //  = 0x16
-	u16 requester_port;	 //   The number assigned to the port by the requester
-	struct mac_addr requester_system;      //   The requester's system id
-	u32 requester_transaction_id;	//   The transaction id allocated by the requester,
-	u16 pad;		 //  = 0
-	u8 tlv_type_terminator;	     //  = 0x00
-	u8 terminator_length;	     //  = 0x00
-	u8 reserved_90[90];	     //  = 0
+	u8 subtype;		/* = 0x02  (marker PDU) */
+	u8 version_number;	/* = 0x01 */
+	u8 tlv_type;		/* = 0x01  (marker information) */
+	/* = 0x02  (marker response information) */
+	u8 marker_length;	/* = 0x16 */
+	u16 requester_port;	/* The number assigned to the port by the requester */
+	struct mac_addr requester_system;	/* The requester's system id */
+	u32 requester_transaction_id;		/* The transaction id allocated by the requester, */
+	u16 pad;		/* = 0 */
+	u8 tlv_type_terminator;	/* = 0x00 */
+	u8 terminator_length;	/* = 0x00 */
+	u8 reserved_90[90];	/* = 0 */
 } __packed bond_marker_t;
 
 typedef struct bond_marker_header {
@@ -173,7 +173,7 @@ struct port;
 #pragma pack(8)
 #endif
 
-// aggregator structure(43.4.5 in the 802.3ad standard)
+/* aggregator structure(43.4.5 in the 802.3ad standard) */
 typedef struct aggregator {
 	struct mac_addr aggregator_mac_address;
 	u16 aggregator_identifier;
@@ -183,12 +183,12 @@ typedef struct aggregator {
 	struct mac_addr partner_system;
 	u16 partner_system_priority;
 	u16 partner_oper_aggregator_key;
-	u16 receive_state;		// BOOLEAN
-	u16 transmit_state;		// BOOLEAN
+	u16 receive_state;	/* BOOLEAN */
+	u16 transmit_state;	/* BOOLEAN */
 	struct port *lag_ports;
-	// ****** PRIVATE PARAMETERS ******
-	struct slave *slave;	    // pointer to the bond slave that this aggregator belongs to
-	u16 is_active;	    // BOOLEAN. Indicates if this aggregator is active
+	/* ****** PRIVATE PARAMETERS ****** */
+	struct slave *slave;	/* pointer to the bond slave that this aggregator belongs to */
+	u16 is_active;		/* BOOLEAN. Indicates if this aggregator is active */
 	u16 num_of_ports;
 } aggregator_t;
 
@@ -201,12 +201,12 @@ struct port_params {
 	u16 port_state;
 };
 
-// port structure(43.4.6 in the 802.3ad standard)
+/* port structure(43.4.6 in the 802.3ad standard) */
 typedef struct port {
 	u16 actor_port_number;
 	u16 actor_port_priority;
-	struct mac_addr actor_system;	       // This parameter is added here although it is not specified in the standard, just for simplification
-	u16 actor_system_priority;	 // This parameter is added here although it is not specified in the standard, just for simplification
+	struct mac_addr actor_system;	/* This parameter is added here although it is not specified in the standard, just for simplification */
+	u16 actor_system_priority;	/* This parameter is added here although it is not specified in the standard, just for simplification */
 	u16 actor_port_aggregator_identifier;
 	bool ntt;
 	u16 actor_admin_port_key;
@@ -219,24 +219,24 @@ typedef struct port {
 
 	bool is_enabled;
 
-	// ****** PRIVATE PARAMETERS ******
-	u16 sm_vars;	      // all state machines variables for this port
-	rx_states_t sm_rx_state;	// state machine rx state
-	u16 sm_rx_timer_counter;    // state machine rx timer counter
-	periodic_states_t sm_periodic_state;// state machine periodic state
-	u16 sm_periodic_timer_counter;	// state machine periodic timer counter
-	mux_states_t sm_mux_state;	// state machine mux state
-	u16 sm_mux_timer_counter;   // state machine mux timer counter
-	tx_states_t sm_tx_state;	// state machine tx state
-	u16 sm_tx_timer_counter;    // state machine tx timer counter(allways on - enter to transmit state 3 time per second)
-	struct slave *slave;	    // pointer to the bond slave that this port belongs to
-	struct aggregator *aggregator;	   // pointer to an aggregator that this port related to
-	struct port *next_port_in_aggregator; // Next port on the linked list of the parent aggregator
-	u32 transaction_id;	    // continuous number for identification of Marker PDU's;
-	struct lacpdu lacpdu;	       // the lacpdu that will be sent for this port
+	/* ****** PRIVATE PARAMETERS ****** */
+	u16 sm_vars;		/* all state machines variables for this port */
+	rx_states_t sm_rx_state;	/* state machine rx state */
+	u16 sm_rx_timer_counter;	/* state machine rx timer counter */
+	periodic_states_t sm_periodic_state;	/* state machine periodic state */
+	u16 sm_periodic_timer_counter;	/* state machine periodic timer counter */
+	mux_states_t sm_mux_state;	/* state machine mux state */
+	u16 sm_mux_timer_counter;	/* state machine mux timer counter */
+	tx_states_t sm_tx_state;	/* state machine tx state */
+	u16 sm_tx_timer_counter;	/* state machine tx timer counter(allways on - enter to transmit state 3 time per second) */
+	struct slave *slave;		/* pointer to the bond slave that this port belongs to */
+	struct aggregator *aggregator;	/* pointer to an aggregator that this port related to */
+	struct port *next_port_in_aggregator;	/* Next port on the linked list of the parent aggregator */
+	u32 transaction_id;		/* continuous number for identification of Marker PDU's; */
+	struct lacpdu lacpdu;		/* the lacpdu that will be sent for this port */
 } port_t;
 
-// system structure
+/* system structure */
 struct ad_system {
 	u16 sys_priority;
 	struct mac_addr sys_mac_addr;
@@ -246,26 +246,25 @@ struct ad_system {
 #pragma pack()
 #endif
 
-// ================= AD Exported structures to the main bonding code ==================
+/* ========== AD Exported structures to the main bonding code ========== */
 #define BOND_AD_INFO(bond)   ((bond)->ad_info)
 #define SLAVE_AD_INFO(slave) ((slave)->ad_info)
 
 struct ad_bond_info {
-	struct ad_system system;	    /* 802.3ad system structure */
-	u32 agg_select_timer;	    // Timer to select aggregator after all adapter's hand shakes
+	struct ad_system system;	/* 802.3ad system structure */
+	u32 agg_select_timer;		/* Timer to select aggregator after all adapter's hand shakes */
 };
 
 struct ad_slave_info {
-	struct aggregator aggregator;	    // 802.3ad aggregator structure
-	struct port port;		    // 802.3ad port structure
-	spinlock_t state_machine_lock; /* mutex state machines vs.
-					  incoming LACPDU */
+	struct aggregator aggregator;	/* 802.3ad aggregator structure */
+	struct port port;		/* 802.3ad port structure */
+	spinlock_t state_machine_lock;	/* mutex state machines vs. incoming LACPDU */
 	u16 id;
 };
 
-// ================= AD Exported functions to the main bonding code ==================
+/* ========== AD Exported functions to the main bonding code ========== */
 void bond_3ad_initialize(struct bonding *bond, u16 tick_resolution);
-void  bond_3ad_bind_slave(struct slave *slave);
+void bond_3ad_bind_slave(struct slave *slave);
 void bond_3ad_unbind_slave(struct slave *slave);
 void bond_3ad_state_machine_handler(struct work_struct *);
 void bond_3ad_initiate_agg_selection(struct bonding *bond, int timeout);
@@ -280,5 +279,5 @@ int bond_3ad_lacpdu_recv(const struct sk_buff *skb, struct bonding *bond,
 			 struct slave *slave);
 int bond_3ad_set_carrier(struct bonding *bond);
 void bond_3ad_update_lacp_rate(struct bonding *bond);
-#endif //__BOND_3AD_H__
+#endif /* __BOND_3AD_H__ */
 
-- 
cgit v1.2.2


From ada0f8633c5b8dad640e1a2bcb95499ec187ac17 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Sat, 15 Feb 2014 16:02:17 -0800
Subject: bonding: Convert memcpy(foo, bar, ETH_ALEN) to ether_addr_copy(foo,
 bar)

ether_addr_copy is smaller and faster for some architectures.

This relies on a stack frame being at least __aligned(2)
for one use of an Ethernet address on the stack.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_3ad.c  |  8 ++++----
 drivers/net/bonding/bond_alb.c  | 30 +++++++++++++++---------------
 drivers/net/bonding/bond_main.c | 12 ++++++------
 3 files changed, 25 insertions(+), 25 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index f6eda2d42dbe..e9edd8473df6 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -768,11 +768,11 @@ static int ad_lacpdu_send(struct port *port)
 
 	lacpdu_header = (struct lacpdu_header *)skb_put(skb, length);
 
-	memcpy(lacpdu_header->hdr.h_dest, lacpdu_mcast_addr, ETH_ALEN);
+	ether_addr_copy(lacpdu_header->hdr.h_dest, lacpdu_mcast_addr);
 	/* Note: source address is set to be the member's PERMANENT address,
 	 * because we use it to identify loopback lacpdus in receive.
 	 */
-	memcpy(lacpdu_header->hdr.h_source, slave->perm_hwaddr, ETH_ALEN);
+	ether_addr_copy(lacpdu_header->hdr.h_source, slave->perm_hwaddr);
 	lacpdu_header->hdr.h_proto = PKT_TYPE_LACPDU;
 
 	lacpdu_header->lacpdu = port->lacpdu;
@@ -810,11 +810,11 @@ static int ad_marker_send(struct port *port, struct bond_marker *marker)
 
 	marker_header = (struct bond_marker_header *)skb_put(skb, length);
 
-	memcpy(marker_header->hdr.h_dest, lacpdu_mcast_addr, ETH_ALEN);
+	ether_addr_copy(marker_header->hdr.h_dest, lacpdu_mcast_addr);
 	/* Note: source address is set to be the member's PERMANENT address,
 	 * because we use it to identify loopback MARKERs in receive.
 	 */
-	memcpy(marker_header->hdr.h_source, slave->perm_hwaddr, ETH_ALEN);
+	ether_addr_copy(marker_header->hdr.h_source, slave->perm_hwaddr);
 	marker_header->hdr.h_proto = PKT_TYPE_LACPDU;
 
 	marker_header->marker = *marker;
diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index e9f0a98f3df5..538913e62715 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -333,7 +333,7 @@ static void rlb_update_entry_from_arp(struct bonding *bond, struct arp_pkt *arp)
 	    (client_info->ip_dst == arp->ip_src) &&
 	    (!ether_addr_equal_64bits(client_info->mac_dst, arp->mac_src))) {
 		/* update the clients MAC address */
-		memcpy(client_info->mac_dst, arp->mac_src, ETH_ALEN);
+		ether_addr_copy(client_info->mac_dst, arp->mac_src);
 		client_info->ntt = 1;
 		bond_info->rx_ntt = 1;
 	}
@@ -669,9 +669,9 @@ static struct slave *rlb_choose_channel(struct sk_buff *skb, struct bonding *bon
 			/* the entry is already assigned to this client */
 			if (!ether_addr_equal_64bits(arp->mac_dst, mac_bcast)) {
 				/* update mac address from arp */
-				memcpy(client_info->mac_dst, arp->mac_dst, ETH_ALEN);
+				ether_addr_copy(client_info->mac_dst, arp->mac_dst);
 			}
-			memcpy(client_info->mac_src, arp->mac_src, ETH_ALEN);
+			ether_addr_copy(client_info->mac_src, arp->mac_src);
 
 			assigned_slave = client_info->slave;
 			if (assigned_slave) {
@@ -711,8 +711,8 @@ static struct slave *rlb_choose_channel(struct sk_buff *skb, struct bonding *bon
 		 * will be updated with clients actual unicast mac address
 		 * upon receiving an arp reply.
 		 */
-		memcpy(client_info->mac_dst, arp->mac_dst, ETH_ALEN);
-		memcpy(client_info->mac_src, arp->mac_src, ETH_ALEN);
+		ether_addr_copy(client_info->mac_dst, arp->mac_dst);
+		ether_addr_copy(client_info->mac_src, arp->mac_src);
 		client_info->slave = assigned_slave;
 
 		if (!ether_addr_equal_64bits(client_info->mac_dst, mac_bcast)) {
@@ -763,7 +763,7 @@ static struct slave *rlb_arp_xmit(struct sk_buff *skb, struct bonding *bond)
 		*/
 		tx_slave = rlb_choose_channel(skb, bond);
 		if (tx_slave)
-			memcpy(arp->mac_src, tx_slave->dev->dev_addr, ETH_ALEN);
+			ether_addr_copy(arp->mac_src, tx_slave->dev->dev_addr);
 		pr_debug("Server sent ARP Reply packet\n");
 	} else if (arp->op_code == htons(ARPOP_REQUEST)) {
 		/* Create an entry in the rx_hashtbl for this client as a
@@ -1003,8 +1003,8 @@ static void alb_send_lp_vid(struct slave *slave, u8 mac_addr[],
 	char *data;
 
 	memset(&pkt, 0, size);
-	memcpy(pkt.mac_dst, mac_addr, ETH_ALEN);
-	memcpy(pkt.mac_src, mac_addr, ETH_ALEN);
+	ether_addr_copy(pkt.mac_dst, mac_addr);
+	ether_addr_copy(pkt.mac_src, mac_addr);
 	pkt.type = cpu_to_be16(ETH_P_LOOP);
 
 	skb = dev_alloc_skb(size);
@@ -1086,7 +1086,7 @@ static void alb_swap_mac_addr(struct slave *slave1, struct slave *slave2)
 {
 	u8 tmp_mac_addr[ETH_ALEN];
 
-	memcpy(tmp_mac_addr, slave1->dev->dev_addr, ETH_ALEN);
+	ether_addr_copy(tmp_mac_addr, slave1->dev->dev_addr);
 	alb_set_slave_mac_addr(slave1, slave2->dev->dev_addr);
 	alb_set_slave_mac_addr(slave2, tmp_mac_addr);
 
@@ -1283,12 +1283,12 @@ static int alb_set_mac_address(struct bonding *bond, void *addr)
 
 	bond_for_each_slave(bond, slave, iter) {
 		/* save net_device's current hw address */
-		memcpy(tmp_addr, slave->dev->dev_addr, ETH_ALEN);
+		ether_addr_copy(tmp_addr, slave->dev->dev_addr);
 
 		res = dev_set_mac_address(slave->dev, addr);
 
 		/* restore net_device's hw address */
-		memcpy(slave->dev->dev_addr, tmp_addr, ETH_ALEN);
+		ether_addr_copy(slave->dev->dev_addr, tmp_addr);
 
 		if (res)
 			goto unwind;
@@ -1304,9 +1304,9 @@ unwind:
 	bond_for_each_slave(bond, rollback_slave, iter) {
 		if (rollback_slave == slave)
 			break;
-		memcpy(tmp_addr, rollback_slave->dev->dev_addr, ETH_ALEN);
+		ether_addr_copy(tmp_addr, rollback_slave->dev->dev_addr);
 		dev_set_mac_address(rollback_slave->dev, &sa);
-		memcpy(rollback_slave->dev->dev_addr, tmp_addr, ETH_ALEN);
+		ether_addr_copy(rollback_slave->dev->dev_addr, tmp_addr);
 	}
 
 	return res;
@@ -1704,14 +1704,14 @@ void bond_alb_handle_active_change(struct bonding *bond, struct slave *new_slave
 		struct sockaddr sa;
 		u8 tmp_addr[ETH_ALEN];
 
-		memcpy(tmp_addr, new_slave->dev->dev_addr, ETH_ALEN);
+		ether_addr_copy(tmp_addr, new_slave->dev->dev_addr);
 
 		memcpy(sa.sa_data, bond->dev->dev_addr, bond->dev->addr_len);
 		sa.sa_family = bond->dev->type;
 		/* we don't care if it can't change its mac, best effort */
 		dev_set_mac_address(new_slave->dev, &sa);
 
-		memcpy(new_slave->dev->dev_addr, tmp_addr, ETH_ALEN);
+		ether_addr_copy(new_slave->dev->dev_addr, tmp_addr);
 	}
 
 	/* curr_active_slave must be set before calling alb_swap_mac_addr */
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 90994ed31eb4..3bce855e627b 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -673,12 +673,12 @@ static void bond_do_fail_over_mac(struct bonding *bond,
 		write_unlock_bh(&bond->curr_slave_lock);
 
 		if (old_active) {
-			memcpy(tmp_mac, new_active->dev->dev_addr, ETH_ALEN);
+			ether_addr_copy(tmp_mac, new_active->dev->dev_addr);
 			memcpy(saddr.sa_data, old_active->dev->dev_addr,
 			       ETH_ALEN);
 			saddr.sa_family = new_active->dev->type;
 		} else {
-			memcpy(saddr.sa_data, bond->dev->dev_addr, ETH_ALEN);
+			ether_addr_copy(saddr.sa_data, bond->dev->dev_addr);
 			saddr.sa_family = bond->dev->type;
 		}
 
@@ -692,7 +692,7 @@ static void bond_do_fail_over_mac(struct bonding *bond,
 		if (!old_active)
 			goto out;
 
-		memcpy(saddr.sa_data, tmp_mac, ETH_ALEN);
+		ether_addr_copy(saddr.sa_data, tmp_mac);
 		saddr.sa_family = old_active->dev->type;
 
 		rv = dev_set_mac_address(old_active->dev, &saddr);
@@ -1316,7 +1316,7 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 	 * that need it, and for restoring it upon release, and then
 	 * set it to the master's address
 	 */
-	memcpy(new_slave->perm_hwaddr, slave_dev->dev_addr, ETH_ALEN);
+	ether_addr_copy(new_slave->perm_hwaddr, slave_dev->dev_addr);
 
 	if (!bond->params.fail_over_mac ||
 	    bond->params.mode != BOND_MODE_ACTIVEBACKUP) {
@@ -1587,7 +1587,7 @@ err_restore_mac:
 		 * MAC if this slave's MAC is in use by the bond, or at
 		 * least print a warning.
 		 */
-		memcpy(addr.sa_data, new_slave->perm_hwaddr, ETH_ALEN);
+		ether_addr_copy(addr.sa_data, new_slave->perm_hwaddr);
 		addr.sa_family = slave_dev->type;
 		dev_set_mac_address(slave_dev, &addr);
 	}
@@ -1776,7 +1776,7 @@ static int __bond_release_one(struct net_device *bond_dev,
 	if (bond->params.fail_over_mac != BOND_FOM_ACTIVE ||
 	    bond->params.mode != BOND_MODE_ACTIVEBACKUP) {
 		/* restore original ("permanent") mac address */
-		memcpy(addr.sa_data, slave->perm_hwaddr, ETH_ALEN);
+		ether_addr_copy(addr.sa_data, slave->perm_hwaddr);
 		addr.sa_family = slave_dev->type;
 		dev_set_mac_address(slave_dev, &addr);
 	}
-- 
cgit v1.2.2


From c1b5994770ad5ae03336b5cdd1e0ad622a870a00 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Stefan=20S=C3=B8rensen?= <stefan.sorensen@spectralink.com>
Date: Sun, 16 Feb 2014 14:54:25 +0100
Subject: net:cpsw: Pass unhandled ioctl's on to generic phy ioctl
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This patch allows the use of a generic timestamping phy connected
to the cpsw if CPTS support is not enabled. This also adds support
of the SIOCGMIIREG and SIOCSMIIREG, and moves handling of SIOCGMIIPHY
to the generic driver.

Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com>
Reviewed-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/ti/cpsw.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 1d860ce914ed..39d12535c3c6 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -1471,7 +1471,6 @@ static int cpsw_hwtstamp_get(struct net_device *dev, struct ifreq *ifr)
 static int cpsw_ndo_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
 {
 	struct cpsw_priv *priv = netdev_priv(dev);
-	struct mii_ioctl_data *data = if_mii(req);
 	int slave_no = cpsw_slave_index(priv);
 
 	if (!netif_running(dev))
@@ -1484,14 +1483,11 @@ static int cpsw_ndo_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
 	case SIOCGHWTSTAMP:
 		return cpsw_hwtstamp_get(dev, req);
 #endif
-	case SIOCGMIIPHY:
-		data->phy_id = priv->slaves[slave_no].phy->addr;
-		break;
-	default:
-		return -ENOTSUPP;
 	}
 
-	return 0;
+	if (!priv->slaves[slave_no].phy)
+		return -EOPNOTSUPP;
+	return phy_mii_ioctl(priv->slaves[slave_no].phy, req, cmd);
 }
 
 static void cpsw_ndo_tx_timeout(struct net_device *ndev)
-- 
cgit v1.2.2


From 86eedacc63074dbf304ce9c8b261bef9503c796d Mon Sep 17 00:00:00 2001
From: KY Srinivasan <kys@microsoft.com>
Date: Sun, 16 Feb 2014 16:38:43 -0800
Subject: Drivers: net: hyperv: Get rid of the rndis_filter_packet structure

This structure is redundant; get rid of it make the code little more efficient -
get rid of the unnecessary indirection.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/hyperv/hyperv_net.h   |  6 ------
 drivers/net/hyperv/netvsc_drv.c   |  2 +-
 drivers/net/hyperv/rndis_filter.c | 41 +++------------------------------------
 3 files changed, 4 insertions(+), 45 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/hyperv/hyperv_net.h b/drivers/net/hyperv/hyperv_net.h
index 7b594ce3f21d..7645ba38bde8 100644
--- a/drivers/net/hyperv/hyperv_net.h
+++ b/drivers/net/hyperv/hyperv_net.h
@@ -846,12 +846,6 @@ struct rndis_message {
 };
 
 
-struct rndis_filter_packet {
-	void *completion_ctx;
-	void (*completion)(void *context);
-	struct rndis_message msg;
-};
-
 /* Handy macros */
 
 /* get the size of an RNDIS message. Pass in the message type, */
diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c
index 7756118c2f0a..1eadc136a372 100644
--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -146,7 +146,7 @@ static int netvsc_start_xmit(struct sk_buff *skb, struct net_device *net)
 	/* Allocate a netvsc packet based on # of frags. */
 	packet = kzalloc(sizeof(struct hv_netvsc_packet) +
 			 (num_pages * sizeof(struct hv_page_buffer)) +
-			 sizeof(struct rndis_filter_packet) +
+			 sizeof(struct rndis_message) +
 			 NDIS_VLAN_PPI_SIZE, GFP_ATOMIC);
 	if (!packet) {
 		/* out of memory, drop packet */
diff --git a/drivers/net/hyperv/rndis_filter.c b/drivers/net/hyperv/rndis_filter.c
index 1084e5de3ceb..f0cc8ef21e1c 100644
--- a/drivers/net/hyperv/rndis_filter.c
+++ b/drivers/net/hyperv/rndis_filter.c
@@ -58,9 +58,6 @@ struct rndis_request {
 	u8 request_ext[RNDIS_EXT_LEN];
 };
 
-static void rndis_filter_send_completion(void *ctx);
-
-
 static struct rndis_device *get_rndis_device(void)
 {
 	struct rndis_device *device;
@@ -277,7 +274,7 @@ static void rndis_filter_receive_response(struct rndis_device *dev,
 				"rndis response buffer overflow "
 				"detected (size %u max %zu)\n",
 				resp->msg_len,
-				sizeof(struct rndis_filter_packet));
+				sizeof(struct rndis_message));
 
 			if (resp->ndis_msg_type ==
 			    RNDIS_MSG_RESET_C) {
@@ -898,17 +895,14 @@ int rndis_filter_close(struct hv_device *dev)
 int rndis_filter_send(struct hv_device *dev,
 			     struct hv_netvsc_packet *pkt)
 {
-	int ret;
-	struct rndis_filter_packet *filter_pkt;
 	struct rndis_message *rndis_msg;
 	struct rndis_packet *rndis_pkt;
 	u32 rndis_msg_size;
 	bool isvlan = pkt->vlan_tci & VLAN_TAG_PRESENT;
 
 	/* Add the rndis header */
-	filter_pkt = (struct rndis_filter_packet *)pkt->extension;
+	rndis_msg = (struct rndis_message *)pkt->extension;
 
-	rndis_msg = &filter_pkt->msg;
 	rndis_msg_size = RNDIS_MESSAGE_SIZE(struct rndis_packet);
 	if (isvlan)
 		rndis_msg_size += NDIS_VLAN_PPI_SIZE;
@@ -961,34 +955,5 @@ int rndis_filter_send(struct hv_device *dev,
 		pkt->page_buf[1].len = rndis_msg_size - pkt->page_buf[0].len;
 	}
 
-	/* Save the packet send completion and context */
-	filter_pkt->completion = pkt->completion.send.send_completion;
-	filter_pkt->completion_ctx =
-				pkt->completion.send.send_completion_ctx;
-
-	/* Use ours */
-	pkt->completion.send.send_completion = rndis_filter_send_completion;
-	pkt->completion.send.send_completion_ctx = filter_pkt;
-
-	ret = netvsc_send(dev, pkt);
-	if (ret != 0) {
-		/*
-		 * Reset the completion to originals to allow retries from
-		 * above
-		 */
-		pkt->completion.send.send_completion =
-				filter_pkt->completion;
-		pkt->completion.send.send_completion_ctx =
-				filter_pkt->completion_ctx;
-	}
-
-	return ret;
-}
-
-static void rndis_filter_send_completion(void *ctx)
-{
-	struct rndis_filter_packet *filter_pkt = ctx;
-
-	/* Pass it back to the original handler */
-	filter_pkt->completion(filter_pkt->completion_ctx);
+	return netvsc_send(dev, pkt);
 }
-- 
cgit v1.2.2


From 97c1723a6177790a3a5b8c1173ed0b03571d4e06 Mon Sep 17 00:00:00 2001
From: KY Srinivasan <kys@microsoft.com>
Date: Sun, 16 Feb 2014 16:38:44 -0800
Subject: Drivers: net: hyperv: Cleanup the receive path

Make the receive path a little more efficient by parameterizing the
required state rather than re-establishing that state.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/hyperv/netvsc.c | 29 +++++++++++++----------------
 1 file changed, 13 insertions(+), 16 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/hyperv/netvsc.c b/drivers/net/hyperv/netvsc.c
index 03a2c6e17158..7fa2bbade327 100644
--- a/drivers/net/hyperv/netvsc.c
+++ b/drivers/net/hyperv/netvsc.c
@@ -432,17 +432,14 @@ static inline u32 hv_ringbuf_avail_percent(
 	return avail_write * 100 / ring_info->ring_datasize;
 }
 
-static void netvsc_send_completion(struct hv_device *device,
+static void netvsc_send_completion(struct netvsc_device *net_device,
+				   struct hv_device *device,
 				   struct vmpacket_descriptor *packet)
 {
-	struct netvsc_device *net_device;
 	struct nvsp_message *nvsp_packet;
 	struct hv_netvsc_packet *nvsc_packet;
 	struct net_device *ndev;
 
-	net_device = get_inbound_net_device(device);
-	if (!net_device)
-		return;
 	ndev = net_device->ndev;
 
 	nvsp_packet = (struct nvsp_message *)((unsigned long)packet +
@@ -561,13 +558,13 @@ int netvsc_send(struct hv_device *device,
 }
 
 static void netvsc_send_recv_completion(struct hv_device *device,
+					struct netvsc_device *net_device,
 					u64 transaction_id, u32 status)
 {
 	struct nvsp_message recvcompMessage;
 	int retries = 0;
 	int ret;
 	struct net_device *ndev;
-	struct netvsc_device *net_device = hv_get_drvdata(device);
 
 	ndev = net_device->ndev;
 
@@ -653,14 +650,15 @@ static void netvsc_receive_completion(void *context)
 
 	/* Send a receive completion for the xfer page packet */
 	if (fsend_receive_comp)
-		netvsc_send_recv_completion(device, transaction_id, status);
+		netvsc_send_recv_completion(device, net_device, transaction_id,
+					status);
 
 }
 
-static void netvsc_receive(struct hv_device *device,
-			    struct vmpacket_descriptor *packet)
+static void netvsc_receive(struct netvsc_device *net_device,
+			struct hv_device *device,
+			struct vmpacket_descriptor *packet)
 {
-	struct netvsc_device *net_device;
 	struct vmtransfer_page_packet_header *vmxferpage_packet;
 	struct nvsp_message *nvsp_packet;
 	struct hv_netvsc_packet *netvsc_packet = NULL;
@@ -673,9 +671,6 @@ static void netvsc_receive(struct hv_device *device,
 
 	LIST_HEAD(listHead);
 
-	net_device = get_inbound_net_device(device);
-	if (!net_device)
-		return;
 	ndev = net_device->ndev;
 
 	/*
@@ -741,7 +736,7 @@ static void netvsc_receive(struct hv_device *device,
 		spin_unlock_irqrestore(&net_device->recv_pkt_list_lock,
 				       flags);
 
-		netvsc_send_recv_completion(device,
+		netvsc_send_recv_completion(device, net_device,
 					    vmxferpage_packet->d.trans_id,
 					    NVSP_STAT_FAIL);
 
@@ -825,11 +820,13 @@ static void netvsc_channel_cb(void *context)
 				desc = (struct vmpacket_descriptor *)buffer;
 				switch (desc->type) {
 				case VM_PKT_COMP:
-					netvsc_send_completion(device, desc);
+					netvsc_send_completion(net_device,
+								device, desc);
 					break;
 
 				case VM_PKT_DATA_USING_XFER_PAGES:
-					netvsc_receive(device, desc);
+					netvsc_receive(net_device,
+							device, desc);
 					break;
 
 				default:
-- 
cgit v1.2.2


From ee0c4c39c577d07c05749a5f5b960b4c0fdd8097 Mon Sep 17 00:00:00 2001
From: KY Srinivasan <kys@microsoft.com>
Date: Sun, 16 Feb 2014 16:38:45 -0800
Subject: Drivers: net: hyperv: Cleanup the netvsc receive callback functio

Get rid of the buffer allocation in the receive path for normal packets.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/hyperv/hyperv_net.h |  2 ++
 drivers/net/hyperv/netvsc.c     | 33 ++++++++++-----------------------
 2 files changed, 12 insertions(+), 23 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/hyperv/hyperv_net.h b/drivers/net/hyperv/hyperv_net.h
index 7645ba38bde8..01a16ea77a5a 100644
--- a/drivers/net/hyperv/hyperv_net.h
+++ b/drivers/net/hyperv/hyperv_net.h
@@ -506,6 +506,8 @@ struct netvsc_device {
 
 	/* Holds rndis device info */
 	void *extension;
+	/* The recive buffer for this device */
+	unsigned char cb_buffer[NETVSC_PACKET_SIZE];
 };
 
 /* NdisInitialize message */
diff --git a/drivers/net/hyperv/netvsc.c b/drivers/net/hyperv/netvsc.c
index 7fa2bbade327..9a0e9c6f1414 100644
--- a/drivers/net/hyperv/netvsc.c
+++ b/drivers/net/hyperv/netvsc.c
@@ -795,22 +795,16 @@ static void netvsc_channel_cb(void *context)
 	struct netvsc_device *net_device;
 	u32 bytes_recvd;
 	u64 request_id;
-	unsigned char *packet;
 	struct vmpacket_descriptor *desc;
 	unsigned char *buffer;
 	int bufferlen = NETVSC_PACKET_SIZE;
 	struct net_device *ndev;
 
-	packet = kzalloc(NETVSC_PACKET_SIZE * sizeof(unsigned char),
-			 GFP_ATOMIC);
-	if (!packet)
-		return;
-	buffer = packet;
-
 	net_device = get_inbound_net_device(device);
 	if (!net_device)
-		goto out;
+		return;
 	ndev = net_device->ndev;
+	buffer = net_device->cb_buffer;
 
 	do {
 		ret = vmbus_recvpacket_raw(device->channel, buffer, bufferlen,
@@ -838,23 +832,16 @@ static void netvsc_channel_cb(void *context)
 					break;
 				}
 
-				/* reset */
-				if (bufferlen > NETVSC_PACKET_SIZE) {
-					kfree(buffer);
-					buffer = packet;
-					bufferlen = NETVSC_PACKET_SIZE;
-				}
 			} else {
-				/* reset */
-				if (bufferlen > NETVSC_PACKET_SIZE) {
-					kfree(buffer);
-					buffer = packet;
-					bufferlen = NETVSC_PACKET_SIZE;
-				}
-
+				/*
+				 * We are done for this pass.
+				 */
 				break;
 			}
+
 		} else if (ret == -ENOBUFS) {
+			if (bufferlen > NETVSC_PACKET_SIZE)
+				kfree(buffer);
 			/* Handle large packet */
 			buffer = kmalloc(bytes_recvd, GFP_ATOMIC);
 			if (buffer == NULL) {
@@ -869,8 +856,8 @@ static void netvsc_channel_cb(void *context)
 		}
 	} while (1);
 
-out:
-	kfree(buffer);
+	if (bufferlen > NETVSC_PACKET_SIZE)
+		kfree(buffer);
 	return;
 }
 
-- 
cgit v1.2.2


From 797ac07137d9ae8572008e21e6123a9ae17dae50 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Mon, 17 Feb 2014 13:34:02 -0800
Subject: net: phy: move PHY software reset to genphy_soft_reset

As pointed out by Shaohui, this function is generic for 10/100/1000
PHYs, but 10G PHYs might have a slightly different reset sequence which
prevents most of them from using this function.

Move the BMCR_RESET based software resent sequence to
genphy_soft_reset() in preparation for allowing PHY drivers to implement
a soft_reset() callback.

Reported-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/phy_device.c | 27 ++++++++++++++++++++++-----
 1 file changed, 22 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index c2d778d06405..7c21b8214bb9 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -540,11 +540,7 @@ int phy_init_hw(struct phy_device *phydev)
 	if (!phydev->drv || !phydev->drv->config_init)
 		return 0;
 
-	ret = phy_write(phydev, MII_BMCR, BMCR_RESET);
-	if (ret < 0)
-		return ret;
-
-	ret = phy_poll_reset(phydev);
+	ret = genphy_soft_reset(phydev);
 	if (ret < 0)
 		return ret;
 
@@ -1045,6 +1041,27 @@ static int gen10g_read_status(struct phy_device *phydev)
 	return 0;
 }
 
+/**
+ * genphy_soft_reset - software reset the PHY via BMCR_RESET bit
+ * @phydev: target phy_device struct
+ *
+ * Description: Perform a software PHY reset using the standard
+ * BMCR_RESET bit and poll for the reset bit to be cleared.
+ *
+ * Returns: 0 on success, < 0 on failure
+ */
+int genphy_soft_reset(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = phy_write(phydev, MII_BMCR, BMCR_RESET);
+	if (ret < 0)
+		return ret;
+
+	return phy_poll_reset(phydev);
+}
+EXPORT_SYMBOL(genphy_soft_reset);
+
 static int genphy_config_init(struct phy_device *phydev)
 {
 	int val;
-- 
cgit v1.2.2


From 9df81dd7583d14862d0cfb673a941b261f3b2112 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Mon, 17 Feb 2014 13:34:03 -0800
Subject: net: phy: allow PHY drivers to implement their own software reset

As pointed out by Shaohui, most 10G PHYs out there have a non-standard
compliant software reset sequence, eventually something much more
complex than just toggling the BMCR_RESET bit. Allow PHY driver to
implement their own soft_reset() callback to deal with that. If no
callback is provided, call into genphy_soft_reset() which makes sure the
existing behavior is kept intact.

Reported-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/phy_device.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 7c21b8214bb9..a70b604ac644 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -535,12 +535,16 @@ static int phy_poll_reset(struct phy_device *phydev)
 
 int phy_init_hw(struct phy_device *phydev)
 {
-	int ret;
+	int ret = 0;
 
 	if (!phydev->drv || !phydev->drv->config_init)
 		return 0;
 
-	ret = genphy_soft_reset(phydev);
+	if (phydev->drv->soft_reset)
+		ret = phydev->drv->soft_reset(phydev);
+	else
+		ret = genphy_soft_reset(phydev);
+
 	if (ret < 0)
 		return ret;
 
@@ -1108,6 +1112,12 @@ static int genphy_config_init(struct phy_device *phydev)
 	return 0;
 }
 
+static int gen10g_soft_reset(struct phy_device *phydev)
+{
+	/* Do nothing for now */
+	return 0;
+}
+
 static int gen10g_config_init(struct phy_device *phydev)
 {
 	/* Temporarily just say we support everything */
@@ -1282,6 +1292,7 @@ static struct phy_driver genphy_driver[] = {
 	.phy_id		= 0xffffffff,
 	.phy_id_mask	= 0xffffffff,
 	.name		= "Generic PHY",
+	.soft_reset	= genphy_soft_reset,
 	.config_init	= genphy_config_init,
 	.features	= 0,
 	.config_aneg	= genphy_config_aneg,
@@ -1294,6 +1305,7 @@ static struct phy_driver genphy_driver[] = {
 	.phy_id         = 0xffffffff,
 	.phy_id_mask    = 0xffffffff,
 	.name           = "Generic 10G PHY",
+	.soft_reset	= gen10g_soft_reset,
 	.config_init    = gen10g_config_init,
 	.features       = 0,
 	.config_aneg    = gen10g_config_aneg,
-- 
cgit v1.2.2


From 8fad346f366a72978ea942abd06bd501ebd39c22 Mon Sep 17 00:00:00 2001
From: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Date: Mon, 17 Feb 2014 11:34:06 +0100
Subject: ieee802154: add basic support for RF212 to at86rf230 driver

Since the AT86RF2xy chips are mostly compatible, this is only a small
change to the actual driver code. The at86rf230 driver already supports the
RF212 in most places, only three small adjustments are required:

 * force the initial state after P_ON to FORCE_TRX_OFF to work around a
   documented erratum
 * channels_supported depends on the frequency of the transceiver, and
   thus is_rf212
 * do early detection of chip version select an appropriate _ops struct
   based on the chip version.

Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ieee802154/at86rf230.c | 268 +++++++++++++++++++++++++------------
 1 file changed, 179 insertions(+), 89 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index ab31544bc254..6dd97829ff08 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -37,7 +37,6 @@
 
 struct at86rf230_local {
 	struct spi_device *spi;
-	int rstn, slp_tr, dig2;
 
 	u8 part;
 	u8 vers;
@@ -55,6 +54,11 @@ struct at86rf230_local {
 	bool is_tx;
 };
 
+static inline int is_rf212(struct at86rf230_local *local)
+{
+	return local->part == 7;
+}
+
 #define	RG_TRX_STATUS	(0x01)
 #define	SR_TRX_STATUS		0x01, 0x1f, 0
 #define	SR_RESERVED_01_3	0x01, 0x20, 5
@@ -100,7 +104,9 @@ struct at86rf230_local {
 #define	SR_SFD_VALUE		0x0b, 0xff, 0
 #define	RG_TRX_CTRL_2	(0x0c)
 #define	SR_OQPSK_DATA_RATE	0x0c, 0x03, 0
-#define	SR_RESERVED_0c_2	0x0c, 0x7c, 2
+#define	SR_SUB_MODE		0x0c, 0x04, 2
+#define	SR_BPSK_QPSK		0x0c, 0x08, 3
+#define	SR_RESERVED_0c_4	0x0c, 0x70, 4
 #define	SR_RX_SAFE_MODE		0x0c, 0x80, 7
 #define	RG_ANT_DIV	(0x0d)
 #define	SR_ANT_CTRL		0x0d, 0x03, 0
@@ -243,6 +249,57 @@ struct at86rf230_local {
 #define STATE_BUSY_RX_AACK_NOCLK 0x1E
 #define STATE_TRANSITION_IN_PROGRESS 0x1F
 
+static int
+__at86rf230_detect_device(struct spi_device *spi, u16 *man_id, u8 *part,
+		u8 *version)
+{
+	u8 data[4];
+	u8 *buf = kmalloc(2, GFP_KERNEL);
+	int status;
+	struct spi_message msg;
+	struct spi_transfer xfer = {
+		.len	= 2,
+		.tx_buf	= buf,
+		.rx_buf	= buf,
+	};
+	u8 reg;
+
+	if (!buf)
+		return -ENOMEM;
+
+	for (reg = RG_PART_NUM; reg <= RG_MAN_ID_1; reg++) {
+		buf[0] = (reg & CMD_REG_MASK) | CMD_REG;
+		buf[1] = 0xff;
+		dev_vdbg(&spi->dev, "buf[0] = %02x\n", buf[0]);
+		spi_message_init(&msg);
+		spi_message_add_tail(&xfer, &msg);
+
+		status = spi_sync(spi, &msg);
+		dev_vdbg(&spi->dev, "status = %d\n", status);
+		if (msg.status)
+			status = msg.status;
+
+		dev_vdbg(&spi->dev, "status = %d\n", status);
+		dev_vdbg(&spi->dev, "buf[0] = %02x\n", buf[0]);
+		dev_vdbg(&spi->dev, "buf[1] = %02x\n", buf[1]);
+
+		if (status == 0)
+			data[reg - RG_PART_NUM] = buf[1];
+		else
+			break;
+	}
+
+	if (status == 0) {
+		*part = data[0];
+		*version = data[1];
+		*man_id = (data[3] << 8) | data[2];
+	}
+
+	kfree(buf);
+
+	return status;
+}
+
 static int
 __at86rf230_write(struct at86rf230_local *lp, u8 addr, u8 data)
 {
@@ -519,6 +576,27 @@ at86rf230_stop(struct ieee802154_dev *dev)
 	at86rf230_state(dev, STATE_FORCE_TRX_OFF);
 }
 
+static int
+at86rf230_set_channel(struct at86rf230_local *lp, int page, int channel)
+{
+	return at86rf230_write_subreg(lp, SR_CHANNEL, channel);
+}
+
+static int
+at86rf212_set_channel(struct at86rf230_local *lp, int page, int channel)
+{
+	int rc;
+
+	if (channel == 0)
+		rc = at86rf230_write_subreg(lp, SR_SUB_MODE, 0);
+	else
+		rc = at86rf230_write_subreg(lp, SR_SUB_MODE, 1);
+	if (rc < 0)
+		return rc;
+
+	return at86rf230_write_subreg(lp, SR_CHANNEL, channel);
+}
+
 static int
 at86rf230_channel(struct ieee802154_dev *dev, int page, int channel)
 {
@@ -527,12 +605,19 @@ at86rf230_channel(struct ieee802154_dev *dev, int page, int channel)
 
 	might_sleep();
 
-	if (page != 0 || channel < 11 || channel > 26) {
+	if (page < 0 || page > 31 ||
+	    !(lp->dev->phy->channels_supported[page] & BIT(channel))) {
 		WARN_ON(1);
 		return -EINVAL;
 	}
 
-	rc = at86rf230_write_subreg(lp, SR_CHANNEL, channel);
+	if (is_rf212(lp))
+		rc = at86rf212_set_channel(lp, page, channel);
+	else
+		rc = at86rf230_set_channel(lp, page, channel);
+	if (rc < 0)
+		return rc;
+
 	msleep(1); /* Wait for PLL */
 	dev->phy->current_channel = channel;
 
@@ -678,6 +763,16 @@ static struct ieee802154_ops at86rf230_ops = {
 	.set_hw_addr_filt = at86rf230_set_hw_addr_filt,
 };
 
+static struct ieee802154_ops at86rf212_ops = {
+	.owner = THIS_MODULE,
+	.xmit = at86rf230_xmit,
+	.ed = at86rf230_ed,
+	.set_channel = at86rf230_channel,
+	.start = at86rf230_start,
+	.stop = at86rf230_stop,
+	.set_hw_addr_filt = at86rf230_set_hw_addr_filt,
+};
+
 static void at86rf230_irqwork(struct work_struct *work)
 {
 	struct at86rf230_local *lp =
@@ -759,7 +854,8 @@ static int at86rf230_hw_init(struct at86rf230_local *lp)
 
 	dev_info(&lp->spi->dev, "Status: %02x\n", status);
 	if (status == STATE_P_ON) {
-		rc = at86rf230_write_subreg(lp, SR_TRX_CMD, STATE_TRX_OFF);
+		rc = at86rf230_write_subreg(lp, SR_TRX_CMD,
+					    STATE_FORCE_TRX_OFF);
 		if (rc)
 			return rc;
 		msleep(1);
@@ -824,26 +920,18 @@ static int at86rf230_hw_init(struct at86rf230_local *lp)
 	return 0;
 }
 
-static void at86rf230_fill_data(struct spi_device *spi)
-{
-	struct at86rf230_local *lp = spi_get_drvdata(spi);
-	struct at86rf230_platform_data *pdata = spi->dev.platform_data;
-
-	lp->rstn = pdata->rstn;
-	lp->slp_tr = pdata->slp_tr;
-	lp->dig2 = pdata->dig2;
-}
-
 static int at86rf230_probe(struct spi_device *spi)
 {
 	struct at86rf230_platform_data *pdata;
 	struct ieee802154_dev *dev;
 	struct at86rf230_local *lp;
-	u8 man_id_0, man_id_1, status;
+	u16 man_id = 0;
+	u8 part = 0, version = 0, status;
 	irq_handler_t irq_handler;
 	work_func_t irq_worker;
-	int rc, supported = 0;
+	int rc;
 	const char *chip;
+	struct ieee802154_ops *ops = NULL;
 
 	if (!spi->irq) {
 		dev_err(&spi->dev, "no IRQ specified\n");
@@ -856,116 +944,115 @@ static int at86rf230_probe(struct spi_device *spi)
 		return -EINVAL;
 	}
 
-	dev = ieee802154_alloc_device(sizeof(*lp), &at86rf230_ops);
-	if (!dev)
-		return -ENOMEM;
-
-	lp = dev->priv;
-	lp->dev = dev;
-
-	lp->spi = spi;
-
-	dev->parent = &spi->dev;
-	dev->extra_tx_headroom = 0;
-	/* We do support only 2.4 Ghz */
-	dev->phy->channels_supported[0] = 0x7FFF800;
-	dev->flags = IEEE802154_HW_OMIT_CKSUM;
-
-	if (pdata->irq_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) {
-		irq_worker = at86rf230_irqwork;
-		irq_handler = at86rf230_isr;
-	} else {
-		irq_worker = at86rf230_irqwork_level;
-		irq_handler = at86rf230_isr_level;
-	}
-
-	mutex_init(&lp->bmux);
-	INIT_WORK(&lp->irqwork, irq_worker);
-	spin_lock_init(&lp->lock);
-	init_completion(&lp->tx_complete);
-
-	spi_set_drvdata(spi, lp);
-
-	at86rf230_fill_data(spi);
-
-	rc = gpio_request(lp->rstn, "rstn");
+	rc = gpio_request(pdata->rstn, "rstn");
 	if (rc)
-		goto err_rstn;
+		return rc;
 
-	if (gpio_is_valid(lp->slp_tr)) {
-		rc = gpio_request(lp->slp_tr, "slp_tr");
+	if (gpio_is_valid(pdata->slp_tr)) {
+		rc = gpio_request(pdata->slp_tr, "slp_tr");
 		if (rc)
 			goto err_slp_tr;
 	}
 
-	rc = gpio_direction_output(lp->rstn, 1);
+	rc = gpio_direction_output(pdata->rstn, 1);
 	if (rc)
 		goto err_gpio_dir;
 
-	if (gpio_is_valid(lp->slp_tr)) {
-		rc = gpio_direction_output(lp->slp_tr, 0);
+	if (gpio_is_valid(pdata->slp_tr)) {
+		rc = gpio_direction_output(pdata->slp_tr, 0);
 		if (rc)
 			goto err_gpio_dir;
 	}
 
 	/* Reset */
 	msleep(1);
-	gpio_set_value(lp->rstn, 0);
+	gpio_set_value(pdata->rstn, 0);
 	msleep(1);
-	gpio_set_value(lp->rstn, 1);
+	gpio_set_value(pdata->rstn, 1);
 	msleep(1);
 
-	rc = at86rf230_read_subreg(lp, SR_MAN_ID_0, &man_id_0);
-	if (rc)
-		goto err_gpio_dir;
-	rc = at86rf230_read_subreg(lp, SR_MAN_ID_1, &man_id_1);
-	if (rc)
+	rc = __at86rf230_detect_device(spi, &man_id, &part, &version);
+	if (rc < 0)
 		goto err_gpio_dir;
 
-	if (man_id_1 != 0x00 || man_id_0 != 0x1f) {
+	if (man_id != 0x001f) {
 		dev_err(&spi->dev, "Non-Atmel dev found (MAN_ID %02x %02x)\n",
-			man_id_1, man_id_0);
+			man_id >> 8, man_id & 0xFF);
 		rc = -EINVAL;
 		goto err_gpio_dir;
 	}
 
-	rc = at86rf230_read_subreg(lp, SR_PART_NUM, &lp->part);
-	if (rc)
-		goto err_gpio_dir;
-
-	rc = at86rf230_read_subreg(lp, SR_VERSION_NUM, &lp->vers);
-	if (rc)
-		goto err_gpio_dir;
-
-	switch (lp->part) {
+	switch (part) {
 	case 2:
 		chip = "at86rf230";
-		/* supported = 1;  FIXME: should be easy to support; */
+		/* FIXME: should be easy to support; */
 		break;
 	case 3:
 		chip = "at86rf231";
-		supported = 1;
+		ops = &at86rf230_ops;
+		break;
+	case 7:
+		chip = "at86rf212";
+		if (version == 1)
+			ops = &at86rf212_ops;
 		break;
 	default:
 		chip = "UNKNOWN";
 		break;
 	}
 
-	dev_info(&spi->dev, "Detected %s chip version %d\n", chip, lp->vers);
-	if (!supported) {
+	dev_info(&spi->dev, "Detected %s chip version %d\n", chip, version);
+	if (!ops) {
 		rc = -ENOTSUPP;
 		goto err_gpio_dir;
 	}
 
+	dev = ieee802154_alloc_device(sizeof(*lp), ops);
+	if (!dev) {
+		rc = -ENOMEM;
+		goto err_gpio_dir;
+	}
+
+	lp = dev->priv;
+	lp->dev = dev;
+	lp->part = part;
+	lp->vers = version;
+
+	lp->spi = spi;
+
+	dev->parent = &spi->dev;
+	dev->extra_tx_headroom = 0;
+	dev->flags = IEEE802154_HW_OMIT_CKSUM | IEEE802154_HW_AACK;
+
+	if (pdata->irq_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) {
+		irq_worker = at86rf230_irqwork;
+		irq_handler = at86rf230_isr;
+	} else {
+		irq_worker = at86rf230_irqwork_level;
+		irq_handler = at86rf230_isr_level;
+	}
+
+	mutex_init(&lp->bmux);
+	INIT_WORK(&lp->irqwork, irq_worker);
+	spin_lock_init(&lp->lock);
+	init_completion(&lp->tx_complete);
+
+	spi_set_drvdata(spi, lp);
+
+	if (is_rf212(lp))
+		dev->phy->channels_supported[0] = 0x00007FF;
+	else
+		dev->phy->channels_supported[0] = 0x7FFF800;
+
 	rc = at86rf230_hw_init(lp);
 	if (rc)
-		goto err_gpio_dir;
+		goto err_hw_init;
 
 	rc = request_irq(spi->irq, irq_handler,
 			 IRQF_SHARED | pdata->irq_type,
 			 dev_name(&spi->dev), lp);
 	if (rc)
-		goto err_gpio_dir;
+		goto err_hw_init;
 
 	/* Read irq status register to reset irq line */
 	rc = at86rf230_read_subreg(lp, RG_IRQ_STATUS, 0xff, 0, &status);
@@ -980,30 +1067,33 @@ static int at86rf230_probe(struct spi_device *spi)
 
 err_irq:
 	free_irq(spi->irq, lp);
+err_hw_init:
 	flush_work(&lp->irqwork);
-err_gpio_dir:
-	if (gpio_is_valid(lp->slp_tr))
-		gpio_free(lp->slp_tr);
-err_slp_tr:
-	gpio_free(lp->rstn);
-err_rstn:
+	spi_set_drvdata(spi, NULL);
 	mutex_destroy(&lp->bmux);
 	ieee802154_free_device(lp->dev);
+
+err_gpio_dir:
+	if (gpio_is_valid(pdata->slp_tr))
+		gpio_free(pdata->slp_tr);
+err_slp_tr:
+	gpio_free(pdata->rstn);
 	return rc;
 }
 
 static int at86rf230_remove(struct spi_device *spi)
 {
 	struct at86rf230_local *lp = spi_get_drvdata(spi);
+	struct at86rf230_platform_data *pdata = spi->dev.platform_data;
 
 	ieee802154_unregister_device(lp->dev);
 
 	free_irq(spi->irq, lp);
 	flush_work(&lp->irqwork);
 
-	if (gpio_is_valid(lp->slp_tr))
-		gpio_free(lp->slp_tr);
-	gpio_free(lp->rstn);
+	if (gpio_is_valid(pdata->slp_tr))
+		gpio_free(pdata->slp_tr);
+	gpio_free(pdata->rstn);
 
 	mutex_destroy(&lp->bmux);
 	ieee802154_free_device(lp->dev);
-- 
cgit v1.2.2


From 5b520bbb538da7f7122b1e5dc85f2b4c592d4781 Mon Sep 17 00:00:00 2001
From: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Date: Mon, 17 Feb 2014 11:34:07 +0100
Subject: ieee802154: default to AACK in at86rf230

The current IEEE802.15.4 stack assumes that a radio will never deliver
packets with a bad CRC into the stack, as required by the standard.
at86rf230 driven radios violates this assumption because of another
incompatibility: devices are required to send ACKs if requested by a
sender, but RF2xx will only send ACKs from a special receive mode that
is currently not used by the driver.

Enable this receive mode to fix both bugs. Frames with bad CRCs will not
be received at all, and ACKs will be sent if so requested.

Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ieee802154/at86rf230.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index 6dd97829ff08..bd1ef0b3bee9 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -567,7 +567,7 @@ at86rf230_start(struct ieee802154_dev *dev)
 	if (rc)
 		return rc;
 
-	return at86rf230_state(dev, STATE_RX_ON);
+	return at86rf230_state(dev, STATE_RX_AACK_ON);
 }
 
 static void
-- 
cgit v1.2.2


From 9b2777d6089bcd7fb035847f907280560fe233c8 Mon Sep 17 00:00:00 2001
From: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Date: Mon, 17 Feb 2014 11:34:08 +0100
Subject: ieee802154: add TX power control to wpan_phy

Replace the current u8 transmit_power in wpan_phy with s8 transmit_power.
The u8 field contained the actual tx power and a tolerance field,
which no physical radio every used. Adjust sysfs entries to keep
compatibility with userspace, give tolerances of +-1dB statically there.

This patch only adds support for this in the at86rf230 driver and the
RF212 chip. Configuration calculation for RF212 is also somewhat basic,
but does the job - the RF212 datasheet gives a large table with
suggested values for combinations of TX power and page/channel, if this
does not work well, we might have to copy the whole table.

Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ieee802154/at86rf230.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index bd1ef0b3bee9..9afb4b9d7c93 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -753,6 +753,30 @@ at86rf230_set_hw_addr_filt(struct ieee802154_dev *dev,
 	return 0;
 }
 
+static int
+at86rf212_set_txpower(struct ieee802154_dev *dev, int db)
+{
+	struct at86rf230_local *lp = dev->priv;
+	int rc;
+
+	/* typical maximum output is 5dBm with RG_PHY_TX_PWR 0x60, lower five
+	 * bits decrease power in 1dB steps. 0x60 represents extra PA gain of
+	 * 0dB.
+	 * thus, supported values for db range from -26 to 5, for 31dB of
+	 * reduction to 0dB of reduction.
+	 */
+	if (db > 5 || db < -26)
+		return -EINVAL;
+
+	db = -(db - 5);
+
+	rc = __at86rf230_write(lp, RG_PHY_TX_PWR, 0x60 | db);
+	if (rc)
+		return rc;
+
+	return 0;
+}
+
 static struct ieee802154_ops at86rf230_ops = {
 	.owner = THIS_MODULE,
 	.xmit = at86rf230_xmit,
@@ -771,6 +795,7 @@ static struct ieee802154_ops at86rf212_ops = {
 	.start = at86rf230_start,
 	.stop = at86rf230_stop,
 	.set_hw_addr_filt = at86rf230_set_hw_addr_filt,
+	.set_txpower = at86rf212_set_txpower,
 };
 
 static void at86rf230_irqwork(struct work_struct *work)
-- 
cgit v1.2.2


From 643e53c20a6ae78149f75861f260d0ca6d9a17e3 Mon Sep 17 00:00:00 2001
From: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Date: Mon, 17 Feb 2014 11:34:09 +0100
Subject: ieee802154: support 100kbps QPSK/EU in at86rf230

The standard assigns channel 0 on page 2 to be 100kbps QPSK in the
868.3MHz band. Add support to the at86rf230 driver for this channel and
page, at the moment predicated only for the RF212 chip.

Per the datasheet, configurations for page 0, channels 0 to 10 and page
2, channels 0 to 10 differ only in the BPSK_QPSK bit. Support for
channels 1 to 10 is untested.

Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ieee802154/at86rf230.c | 17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index 9afb4b9d7c93..04a995dad593 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -106,7 +106,8 @@ static inline int is_rf212(struct at86rf230_local *local)
 #define	SR_OQPSK_DATA_RATE	0x0c, 0x03, 0
 #define	SR_SUB_MODE		0x0c, 0x04, 2
 #define	SR_BPSK_QPSK		0x0c, 0x08, 3
-#define	SR_RESERVED_0c_4	0x0c, 0x70, 4
+#define	SR_OQPSK_SUB1_RC_EN	0x0c, 0x10, 4
+#define	SR_RESERVED_0c_5	0x0c, 0x60, 5
 #define	SR_RX_SAFE_MODE		0x0c, 0x80, 7
 #define	RG_ANT_DIV	(0x0d)
 #define	SR_ANT_CTRL		0x0d, 0x03, 0
@@ -594,6 +595,13 @@ at86rf212_set_channel(struct at86rf230_local *lp, int page, int channel)
 	if (rc < 0)
 		return rc;
 
+	if (page == 0)
+		rc = at86rf230_write_subreg(lp, SR_BPSK_QPSK, 0);
+	else
+		rc = at86rf230_write_subreg(lp, SR_BPSK_QPSK, 1);
+	if (rc < 0)
+		return rc;
+
 	return at86rf230_write_subreg(lp, SR_CHANNEL, channel);
 }
 
@@ -620,6 +628,7 @@ at86rf230_channel(struct ieee802154_dev *dev, int page, int channel)
 
 	msleep(1); /* Wait for PLL */
 	dev->phy->current_channel = channel;
+	dev->phy->current_page = page;
 
 	return 0;
 }
@@ -1064,10 +1073,12 @@ static int at86rf230_probe(struct spi_device *spi)
 
 	spi_set_drvdata(spi, lp);
 
-	if (is_rf212(lp))
+	if (is_rf212(lp)) {
 		dev->phy->channels_supported[0] = 0x00007FF;
-	else
+		dev->phy->channels_supported[2] = 0x00007FF;
+	} else {
 		dev->phy->channels_supported[0] = 0x7FFF800;
+	}
 
 	rc = at86rf230_hw_init(lp);
 	if (rc)
-- 
cgit v1.2.2


From 84dda3c648fd55898064d76366b14f964cdc9d16 Mon Sep 17 00:00:00 2001
From: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Date: Mon, 17 Feb 2014 11:34:10 +0100
Subject: ieee802154: add support for listen-before-talk in wpan_phy

Listen-before-talk is an alternative to CSMA in uncoordinated networks
and prescribed by european regulations if one wants to have a device
with radio duty cycles above 10% (or less in some bands). Add a phy
property to enable/disable LBT in the phy, including support in the
at86rf230 driver for RF212 chips.

Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ieee802154/at86rf230.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index 04a995dad593..3d40c2350261 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -152,7 +152,7 @@ static inline int is_rf212(struct at86rf230_local *local)
 #define	SR_RESERVED_17_5	0x17, 0x08, 3
 #define	SR_AACK_UPLD_RES_FT	0x17, 0x10, 4
 #define	SR_AACK_FLTR_RES_FT	0x17, 0x20, 5
-#define	SR_RESERVED_17_2	0x17, 0x40, 6
+#define	SR_CSMA_LBT_MODE	0x17, 0x40, 6
 #define	SR_RESERVED_17_1	0x17, 0x80, 7
 #define	RG_FTN_CTRL	(0x18)
 #define	SR_RESERVED_18_2	0x18, 0x7f, 0
@@ -786,6 +786,14 @@ at86rf212_set_txpower(struct ieee802154_dev *dev, int db)
 	return 0;
 }
 
+static int
+at86rf212_set_lbt(struct ieee802154_dev *dev, bool on)
+{
+	struct at86rf230_local *lp = dev->priv;
+
+	return at86rf230_write_subreg(lp, SR_CSMA_LBT_MODE, on);
+}
+
 static struct ieee802154_ops at86rf230_ops = {
 	.owner = THIS_MODULE,
 	.xmit = at86rf230_xmit,
@@ -805,6 +813,7 @@ static struct ieee802154_ops at86rf212_ops = {
 	.stop = at86rf230_stop,
 	.set_hw_addr_filt = at86rf230_set_hw_addr_filt,
 	.set_txpower = at86rf212_set_txpower,
+	.set_lbt = at86rf212_set_lbt,
 };
 
 static void at86rf230_irqwork(struct work_struct *work)
-- 
cgit v1.2.2


From ba08fea53a43e02b590d89224afdad976dece841 Mon Sep 17 00:00:00 2001
From: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Date: Mon, 17 Feb 2014 11:34:11 +0100
Subject: ieee802154: add support for CCA mode in wpan phys

The standard describes four modes of clear channel assesment: "energy
above threshold", "carrier found", and the logical and/or of these two.
Support for CCA mode setting is included in the at86rf230 driver,
predicated for RF212 chips.

Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ieee802154/at86rf230.c | 9 +++++++++
 1 file changed, 9 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index 3d40c2350261..c60871aff333 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -794,6 +794,14 @@ at86rf212_set_lbt(struct ieee802154_dev *dev, bool on)
 	return at86rf230_write_subreg(lp, SR_CSMA_LBT_MODE, on);
 }
 
+static int
+at86rf212_set_cca_mode(struct ieee802154_dev *dev, u8 mode)
+{
+	struct at86rf230_local *lp = dev->priv;
+
+	return at86rf230_write_subreg(lp, SR_CCA_MODE, mode);
+}
+
 static struct ieee802154_ops at86rf230_ops = {
 	.owner = THIS_MODULE,
 	.xmit = at86rf230_xmit,
@@ -814,6 +822,7 @@ static struct ieee802154_ops at86rf212_ops = {
 	.set_hw_addr_filt = at86rf230_set_hw_addr_filt,
 	.set_txpower = at86rf212_set_txpower,
 	.set_lbt = at86rf212_set_lbt,
+	.set_cca_mode = at86rf212_set_cca_mode,
 };
 
 static void at86rf230_irqwork(struct work_struct *work)
-- 
cgit v1.2.2


From 6ca001978dce0d50ebac01a38d6287f241a520c6 Mon Sep 17 00:00:00 2001
From: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Date: Mon, 17 Feb 2014 11:34:12 +0100
Subject: ieee802154: add support for setting CCA energy detection levels

Since three of the four clear channel assesment modes make use of energy
detection, provide an API to set the energy detection threshold.
Driver support for this is available in at86rf230 for the RF212 chips.
Since for these chips the minimal energy detection threshold depends on
page and channel used, add a field to struct at86rf230_local that stores
the minimal threshold. Actual ED thresholds are configured as offsets
from this value.

For RF212, setting the ED threshold will not work before a channel/page
has been set due to the dependency of energy detection in the chip and
the actual channel/page selected.

Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ieee802154/at86rf230.c | 26 ++++++++++++++++++++++++--
 1 file changed, 24 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index c60871aff333..20596be61028 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -52,6 +52,8 @@ struct at86rf230_local {
 	spinlock_t lock;
 	bool irq_busy;
 	bool is_tx;
+
+	int rssi_base_val;
 };
 
 static inline int is_rf212(struct at86rf230_local *local)
@@ -580,6 +582,8 @@ at86rf230_stop(struct ieee802154_dev *dev)
 static int
 at86rf230_set_channel(struct at86rf230_local *lp, int page, int channel)
 {
+	lp->rssi_base_val = -91;
+
 	return at86rf230_write_subreg(lp, SR_CHANNEL, channel);
 }
 
@@ -595,10 +599,13 @@ at86rf212_set_channel(struct at86rf230_local *lp, int page, int channel)
 	if (rc < 0)
 		return rc;
 
-	if (page == 0)
+	if (page == 0) {
 		rc = at86rf230_write_subreg(lp, SR_BPSK_QPSK, 0);
-	else
+		lp->rssi_base_val = -100;
+	} else {
 		rc = at86rf230_write_subreg(lp, SR_BPSK_QPSK, 1);
+		lp->rssi_base_val = -98;
+	}
 	if (rc < 0)
 		return rc;
 
@@ -802,6 +809,20 @@ at86rf212_set_cca_mode(struct ieee802154_dev *dev, u8 mode)
 	return at86rf230_write_subreg(lp, SR_CCA_MODE, mode);
 }
 
+static int
+at86rf212_set_cca_ed_level(struct ieee802154_dev *dev, s32 level)
+{
+	struct at86rf230_local *lp = dev->priv;
+	int desens_steps;
+
+	if (level < lp->rssi_base_val || level > 30)
+		return -EINVAL;
+
+	desens_steps = (level - lp->rssi_base_val) * 100 / 207;
+
+	return at86rf230_write_subreg(lp, SR_CCA_ED_THRES, desens_steps);
+}
+
 static struct ieee802154_ops at86rf230_ops = {
 	.owner = THIS_MODULE,
 	.xmit = at86rf230_xmit,
@@ -823,6 +844,7 @@ static struct ieee802154_ops at86rf212_ops = {
 	.set_txpower = at86rf212_set_txpower,
 	.set_lbt = at86rf212_set_lbt,
 	.set_cca_mode = at86rf212_set_cca_mode,
+	.set_cca_ed_level = at86rf212_set_cca_ed_level,
 };
 
 static void at86rf230_irqwork(struct work_struct *work)
-- 
cgit v1.2.2


From 7dcbd22a97eb0689e6c583ad630ae0e7341e34c1 Mon Sep 17 00:00:00 2001
From: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Date: Mon, 17 Feb 2014 11:34:13 +0100
Subject: ieee802154: ensure that first RF212 state comes from TRX_OFF

A documented erratum of the RF212 chip describes that some versions of
RF212 may not be properly reset by the standard reset procedure. The
described workaround seems to not fully work either; my RF212 chips will
not correctly receive any frames unless they are taken from RX mode to
TRX_OFF and back to RX mode, effectively forcing a up-down-up-cycle.
Going to TRX_OFF and to RX without intermediate state changes at least
once fixes this.

The same transition is allowed for RF230, so simply do it all the time.

Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ieee802154/at86rf230.c | 25 +++----------------------
 1 file changed, 3 insertions(+), 22 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index 20596be61028..345b2eeb5a14 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -926,18 +926,9 @@ static int at86rf230_hw_init(struct at86rf230_local *lp)
 	if (rc)
 		return rc;
 
-	dev_info(&lp->spi->dev, "Status: %02x\n", status);
-	if (status == STATE_P_ON) {
-		rc = at86rf230_write_subreg(lp, SR_TRX_CMD,
-					    STATE_FORCE_TRX_OFF);
-		if (rc)
-			return rc;
-		msleep(1);
-		rc = at86rf230_read_subreg(lp, SR_TRX_STATUS, &status);
-		if (rc)
-			return rc;
-		dev_info(&lp->spi->dev, "Status: %02x\n", status);
-	}
+	rc = at86rf230_write_subreg(lp, SR_TRX_CMD, STATE_FORCE_TRX_OFF);
+	if (rc)
+		return rc;
 
 	/* configure irq polarity, defaults to high active */
 	if (pdata->irq_type & (IRQF_TRIGGER_FALLING | IRQF_TRIGGER_LOW))
@@ -965,16 +956,6 @@ static int at86rf230_hw_init(struct at86rf230_local *lp)
 	/* Wait the next SLEEP cycle */
 	msleep(100);
 
-	rc = at86rf230_write_subreg(lp, SR_TRX_CMD, STATE_TX_ON);
-	if (rc)
-		return rc;
-	msleep(1);
-
-	rc = at86rf230_read_subreg(lp, SR_TRX_STATUS, &status);
-	if (rc)
-		return rc;
-	dev_info(&lp->spi->dev, "Status: %02x\n", status);
-
 	rc = at86rf230_read_subreg(lp, SR_DVDD_OK, &status);
 	if (rc)
 		return rc;
-- 
cgit v1.2.2


From f2fdd67c6bc89de0100410efb37de69b1c98ac03 Mon Sep 17 00:00:00 2001
From: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Date: Mon, 17 Feb 2014 11:34:15 +0100
Subject: ieee802154: enable smart transmitter features of RF212

This patch does multiple things:

 * add .set_csma_params and .set_frame_retries for the RF212 radio.
   This should work fine with RF230, but since I have no RF230 radios to
   test with, RF230 does not implement these right now
 * enable TX_ARET for frame retransmission limits greater than -1

Since RF230 has no operations to change CSMA parameters or frame retry
limits, RF230 will not be able to enter TX_ARET with this patch.

Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ieee802154/at86rf230.c | 64 +++++++++++++++++++++++++++++++++++++-
 1 file changed, 63 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index 345b2eeb5a14..34bf011584fb 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -52,6 +52,7 @@ struct at86rf230_local {
 	spinlock_t lock;
 	bool irq_busy;
 	bool is_tx;
+	bool tx_aret;
 
 	int rssi_base_val;
 };
@@ -549,7 +550,9 @@ at86rf230_state(struct ieee802154_dev *dev, int state)
 	} while (val == STATE_TRANSITION_IN_PROGRESS);
 
 
-	if (val == desired_status)
+	if (val == desired_status ||
+	    (desired_status == STATE_RX_ON && val == STATE_BUSY_RX) ||
+	    (desired_status == STATE_RX_AACK_ON && val == STATE_BUSY_RX_AACK))
 		return 0;
 
 	pr_err("unexpected state change: %d, asked for %d\n", val, state);
@@ -570,6 +573,10 @@ at86rf230_start(struct ieee802154_dev *dev)
 	if (rc)
 		return rc;
 
+	rc = at86rf230_state(dev, STATE_FORCE_TX_ON);
+	if (rc)
+		return rc;
+
 	return at86rf230_state(dev, STATE_RX_AACK_ON);
 }
 
@@ -669,6 +676,12 @@ at86rf230_xmit(struct ieee802154_dev *dev, struct sk_buff *skb)
 	if (rc)
 		goto err_rx;
 
+	if (lp->tx_aret) {
+		rc = at86rf230_write_subreg(lp, SR_TRX_CMD, STATE_TX_ARET_ON);
+		if (rc)
+			goto err_rx;
+	}
+
 	rc = at86rf230_write_subreg(lp, SR_TRX_CMD, STATE_BUSY_TX);
 	if (rc)
 		goto err_rx;
@@ -823,6 +836,44 @@ at86rf212_set_cca_ed_level(struct ieee802154_dev *dev, s32 level)
 	return at86rf230_write_subreg(lp, SR_CCA_ED_THRES, desens_steps);
 }
 
+static int
+at86rf212_set_csma_params(struct ieee802154_dev *dev, u8 min_be, u8 max_be,
+			  u8 retries)
+{
+	struct at86rf230_local *lp = dev->priv;
+	int rc;
+
+	if (min_be > max_be || max_be > 8 || retries > 5)
+		return -EINVAL;
+
+	rc = at86rf230_write_subreg(lp, SR_MIN_BE, min_be);
+	if (rc)
+		return rc;
+
+	rc = at86rf230_write_subreg(lp, SR_MAX_BE, max_be);
+	if (rc)
+		return rc;
+
+	return at86rf230_write_subreg(lp, SR_MAX_CSMA_RETRIES, max_be);
+}
+
+static int
+at86rf212_set_frame_retries(struct ieee802154_dev *dev, s8 retries)
+{
+	struct at86rf230_local *lp = dev->priv;
+	int rc = 0;
+
+	if (retries < -1 || retries > 15)
+		return -EINVAL;
+
+	lp->tx_aret = retries >= 0;
+
+	if (retries >= 0)
+		rc = at86rf230_write_subreg(lp, SR_MAX_FRAME_RETRIES, retries);
+
+	return rc;
+}
+
 static struct ieee802154_ops at86rf230_ops = {
 	.owner = THIS_MODULE,
 	.xmit = at86rf230_xmit,
@@ -845,6 +896,8 @@ static struct ieee802154_ops at86rf212_ops = {
 	.set_lbt = at86rf212_set_lbt,
 	.set_cca_mode = at86rf212_set_cca_mode,
 	.set_cca_ed_level = at86rf212_set_cca_ed_level,
+	.set_csma_params = at86rf212_set_csma_params,
+	.set_frame_retries = at86rf212_set_frame_retries,
 };
 
 static void at86rf230_irqwork(struct work_struct *work)
@@ -921,6 +974,7 @@ static int at86rf230_hw_init(struct at86rf230_local *lp)
 	struct at86rf230_platform_data *pdata = lp->spi->dev.platform_data;
 	int rc, irq_pol;
 	u8 status;
+	u8 csma_seed[2];
 
 	rc = at86rf230_read_subreg(lp, SR_TRX_STATUS, &status);
 	if (rc)
@@ -944,6 +998,14 @@ static int at86rf230_hw_init(struct at86rf230_local *lp)
 	if (rc)
 		return rc;
 
+	get_random_bytes(csma_seed, ARRAY_SIZE(csma_seed));
+	rc = at86rf230_write_subreg(lp, SR_CSMA_SEED_0, csma_seed[0]);
+	if (rc)
+		return rc;
+	rc = at86rf230_write_subreg(lp, SR_CSMA_SEED_1, csma_seed[1]);
+	if (rc)
+		return rc;
+
 	/* CLKM changes are applied immediately */
 	rc = at86rf230_write_subreg(lp, SR_CLKM_SHA_SEL, 0x00);
 	if (rc)
-- 
cgit v1.2.2


From c85fde8336ec6c062d65a5c1bca2ca78028111ae Mon Sep 17 00:00:00 2001
From: Sachin Kamat <sachin.kamat@linaro.org>
Date: Mon, 17 Feb 2014 15:29:21 +0530
Subject: net: i40evf: Remove duplicate include

linux/sctp.h was included twice.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/i40evf/i40evf.h | 2 --
 1 file changed, 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40evf/i40evf.h b/drivers/net/ethernet/intel/i40evf/i40evf.h
index a30c4a9125a4..ef7ce65bc00a 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf.h
+++ b/drivers/net/ethernet/intel/i40evf/i40evf.h
@@ -38,8 +38,6 @@
 #include <linux/ipv6.h>
 #include <net/ip6_checksum.h>
 #include <net/udp.h>
-#include <linux/sctp.h>
-
 
 #include "i40e_type.h"
 #include "i40e_virtchnl.h"
-- 
cgit v1.2.2


From 208627883ecfaa182c266eb67178bb71d392af54 Mon Sep 17 00:00:00 2001
From: Claudiu Manoil <claudiu.manoil@freescale.com>
Date: Mon, 17 Feb 2014 12:53:14 +0200
Subject: gianfar: Cleanup/Fix gfar_probe and the hw init code

Factor out gfar_hw_init() to contain all the controller hw
initialization steps for a better control of register writes,
and to significantly simplify the tangled code from gfar_probe().
This results in code size and stack usage reduction (besides
code readability).

Fix memory leak on device removal, by freeing the rx_/tx_queue
structures.

Replace custom bit swapping function with a library one (bitrev8).

Move allocation of rx_/tx_queue struct arrays before the group
structure init, because in order to assign Rx/Tx queues
to groups we need to have the queues first.  This also allows
earlier bail out of gfar_probe(), in case the memory allocation
fails.

The flow control checks for maccfg1 were removed from gfar_probe(),
since flow control is disabled at probe time (priv->rx_/tx_pause_en
are 0). Redundant initializations (by 0) also removed.

Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/freescale/gianfar.c | 331 +++++++++++++++----------------
 drivers/net/ethernet/freescale/gianfar.h |  34 +++-
 2 files changed, 188 insertions(+), 177 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index ad5a5aadc7e1..ab915b060d4c 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -9,7 +9,7 @@
  * Maintainer: Kumar Gala
  * Modifier: Sandeep Gopalpet <sandeep.kumar@freescale.com>
  *
- * Copyright 2002-2009, 2011 Freescale Semiconductor, Inc.
+ * Copyright 2002-2009, 2011-2013 Freescale Semiconductor, Inc.
  * Copyright 2007 MontaVista Software, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
@@ -511,7 +511,43 @@ void unlock_tx_qs(struct gfar_private *priv)
 		spin_unlock(&priv->tx_queue[i]->txlock);
 }
 
-static void free_tx_pointers(struct gfar_private *priv)
+static int gfar_alloc_tx_queues(struct gfar_private *priv)
+{
+	int i;
+
+	for (i = 0; i < priv->num_tx_queues; i++) {
+		priv->tx_queue[i] = kzalloc(sizeof(struct gfar_priv_tx_q),
+					    GFP_KERNEL);
+		if (!priv->tx_queue[i])
+			return -ENOMEM;
+
+		priv->tx_queue[i]->tx_skbuff = NULL;
+		priv->tx_queue[i]->qindex = i;
+		priv->tx_queue[i]->dev = priv->ndev;
+		spin_lock_init(&(priv->tx_queue[i]->txlock));
+	}
+	return 0;
+}
+
+static int gfar_alloc_rx_queues(struct gfar_private *priv)
+{
+	int i;
+
+	for (i = 0; i < priv->num_rx_queues; i++) {
+		priv->rx_queue[i] = kzalloc(sizeof(struct gfar_priv_rx_q),
+					    GFP_KERNEL);
+		if (!priv->rx_queue[i])
+			return -ENOMEM;
+
+		priv->rx_queue[i]->rx_skbuff = NULL;
+		priv->rx_queue[i]->qindex = i;
+		priv->rx_queue[i]->dev = priv->ndev;
+		spin_lock_init(&(priv->rx_queue[i]->rxlock));
+	}
+	return 0;
+}
+
+static void gfar_free_tx_queues(struct gfar_private *priv)
 {
 	int i;
 
@@ -519,7 +555,7 @@ static void free_tx_pointers(struct gfar_private *priv)
 		kfree(priv->tx_queue[i]);
 }
 
-static void free_rx_pointers(struct gfar_private *priv)
+static void gfar_free_rx_queues(struct gfar_private *priv)
 {
 	int i;
 
@@ -608,6 +644,30 @@ static int gfar_parse_group(struct device_node *np,
 		grp->rx_bit_map = 0xFF;
 		grp->tx_bit_map = 0xFF;
 	}
+
+	/* bit_map's MSB is q0 (from q0 to q7) but, for_each_set_bit parses
+	 * right to left, so we need to revert the 8 bits to get the q index
+	 */
+	grp->rx_bit_map = bitrev8(grp->rx_bit_map);
+	grp->tx_bit_map = bitrev8(grp->tx_bit_map);
+
+	/* Calculate RSTAT, TSTAT, RQUEUE and TQUEUE values,
+	 * also assign queues to groups
+	 */
+	for_each_set_bit(i, &grp->rx_bit_map, priv->num_rx_queues) {
+		grp->num_rx_queues++;
+		grp->rstat |= (RSTAT_CLEAR_RHALT >> i);
+		priv->rqueue |= ((RQUEUE_EN0 | RQUEUE_EX0) >> i);
+		priv->rx_queue[i]->grp = grp;
+	}
+
+	for_each_set_bit(i, &grp->tx_bit_map, priv->num_tx_queues) {
+		grp->num_tx_queues++;
+		grp->tstat |= (TSTAT_CLEAR_THALT >> i);
+		priv->tqueue |= (TQUEUE_EN0 >> i);
+		priv->tx_queue[i]->grp = grp;
+	}
+
 	priv->num_grps++;
 
 	return 0;
@@ -664,7 +724,14 @@ static int gfar_of_init(struct platform_device *ofdev, struct net_device **pdev)
 	priv->num_tx_queues = num_tx_qs;
 	netif_set_real_num_rx_queues(dev, num_rx_qs);
 	priv->num_rx_queues = num_rx_qs;
-	priv->num_grps = 0x0;
+
+	err = gfar_alloc_tx_queues(priv);
+	if (err)
+		goto tx_alloc_failed;
+
+	err = gfar_alloc_rx_queues(priv);
+	if (err)
+		goto rx_alloc_failed;
 
 	/* Init Rx queue filer rule set linked list */
 	INIT_LIST_HEAD(&priv->rx_list.list);
@@ -691,38 +758,6 @@ static int gfar_of_init(struct platform_device *ofdev, struct net_device **pdev)
 			goto err_grp_init;
 	}
 
-	for (i = 0; i < priv->num_tx_queues; i++)
-		priv->tx_queue[i] = NULL;
-	for (i = 0; i < priv->num_rx_queues; i++)
-		priv->rx_queue[i] = NULL;
-
-	for (i = 0; i < priv->num_tx_queues; i++) {
-		priv->tx_queue[i] = kzalloc(sizeof(struct gfar_priv_tx_q),
-					    GFP_KERNEL);
-		if (!priv->tx_queue[i]) {
-			err = -ENOMEM;
-			goto tx_alloc_failed;
-		}
-		priv->tx_queue[i]->tx_skbuff = NULL;
-		priv->tx_queue[i]->qindex = i;
-		priv->tx_queue[i]->dev = dev;
-		spin_lock_init(&(priv->tx_queue[i]->txlock));
-	}
-
-	for (i = 0; i < priv->num_rx_queues; i++) {
-		priv->rx_queue[i] = kzalloc(sizeof(struct gfar_priv_rx_q),
-					    GFP_KERNEL);
-		if (!priv->rx_queue[i]) {
-			err = -ENOMEM;
-			goto rx_alloc_failed;
-		}
-		priv->rx_queue[i]->rx_skbuff = NULL;
-		priv->rx_queue[i]->qindex = i;
-		priv->rx_queue[i]->dev = dev;
-		spin_lock_init(&(priv->rx_queue[i]->rxlock));
-	}
-
-
 	stash = of_get_property(np, "bd-stash", NULL);
 
 	if (stash) {
@@ -784,12 +819,12 @@ static int gfar_of_init(struct platform_device *ofdev, struct net_device **pdev)
 
 	return 0;
 
-rx_alloc_failed:
-	free_rx_pointers(priv);
-tx_alloc_failed:
-	free_tx_pointers(priv);
 err_grp_init:
 	unmap_group_regs(priv);
+rx_alloc_failed:
+	gfar_free_rx_queues(priv);
+tx_alloc_failed:
+	gfar_free_tx_queues(priv);
 	free_gfar_dev(priv);
 	return err;
 }
@@ -875,19 +910,6 @@ static int gfar_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 	return phy_mii_ioctl(priv->phydev, rq, cmd);
 }
 
-static unsigned int reverse_bitmap(unsigned int bit_map, unsigned int max_qs)
-{
-	unsigned int new_bit_map = 0x0;
-	int mask = 0x1 << (max_qs - 1), i;
-
-	for (i = 0; i < max_qs; i++) {
-		if (bit_map & mask)
-			new_bit_map = new_bit_map + (1 << i);
-		mask = mask >> 0x1;
-	}
-	return new_bit_map;
-}
-
 static u32 cluster_entry_per_class(struct gfar_private *priv, u32 rqfar,
 				   u32 class)
 {
@@ -1005,19 +1027,88 @@ static void gfar_detect_errata(struct gfar_private *priv)
 			 priv->errata);
 }
 
+static void gfar_hw_init(struct gfar_private *priv)
+{
+	struct gfar __iomem *regs = priv->gfargrp[0].regs;
+	u32 tempval;
+
+	/* Reset MAC layer */
+	gfar_write(&regs->maccfg1, MACCFG1_SOFT_RESET);
+
+	/* We need to delay at least 3 TX clocks */
+	udelay(2);
+
+	/* the soft reset bit is not self-resetting, so we need to
+	 * clear it before resuming normal operation
+	 */
+	gfar_write(&regs->maccfg1, 0);
+
+	/* Initialize MACCFG2. */
+	tempval = MACCFG2_INIT_SETTINGS;
+	if (gfar_has_errata(priv, GFAR_ERRATA_74))
+		tempval |= MACCFG2_HUGEFRAME | MACCFG2_LENGTHCHECK;
+	gfar_write(&regs->maccfg2, tempval);
+
+	/* Initialize ECNTRL */
+	gfar_write(&regs->ecntrl, ECNTRL_INIT_SETTINGS);
+
+	/* Program the interrupt steering regs, only for MG devices */
+	if (priv->num_grps > 1)
+		gfar_write_isrg(priv);
+
+	/* Enable all Rx/Tx queues after MAC reset */
+	gfar_write(&regs->rqueue, priv->rqueue);
+	gfar_write(&regs->tqueue, priv->tqueue);
+}
+
+static void __init gfar_init_addr_hash_table(struct gfar_private *priv)
+{
+	struct gfar __iomem *regs = priv->gfargrp[0].regs;
+
+	if (priv->device_flags & FSL_GIANFAR_DEV_HAS_EXTENDED_HASH) {
+		priv->extended_hash = 1;
+		priv->hash_width = 9;
+
+		priv->hash_regs[0] = &regs->igaddr0;
+		priv->hash_regs[1] = &regs->igaddr1;
+		priv->hash_regs[2] = &regs->igaddr2;
+		priv->hash_regs[3] = &regs->igaddr3;
+		priv->hash_regs[4] = &regs->igaddr4;
+		priv->hash_regs[5] = &regs->igaddr5;
+		priv->hash_regs[6] = &regs->igaddr6;
+		priv->hash_regs[7] = &regs->igaddr7;
+		priv->hash_regs[8] = &regs->gaddr0;
+		priv->hash_regs[9] = &regs->gaddr1;
+		priv->hash_regs[10] = &regs->gaddr2;
+		priv->hash_regs[11] = &regs->gaddr3;
+		priv->hash_regs[12] = &regs->gaddr4;
+		priv->hash_regs[13] = &regs->gaddr5;
+		priv->hash_regs[14] = &regs->gaddr6;
+		priv->hash_regs[15] = &regs->gaddr7;
+
+	} else {
+		priv->extended_hash = 0;
+		priv->hash_width = 8;
+
+		priv->hash_regs[0] = &regs->gaddr0;
+		priv->hash_regs[1] = &regs->gaddr1;
+		priv->hash_regs[2] = &regs->gaddr2;
+		priv->hash_regs[3] = &regs->gaddr3;
+		priv->hash_regs[4] = &regs->gaddr4;
+		priv->hash_regs[5] = &regs->gaddr5;
+		priv->hash_regs[6] = &regs->gaddr6;
+		priv->hash_regs[7] = &regs->gaddr7;
+	}
+}
+
 /* Set up the ethernet device structure, private data,
  * and anything else we need before we start
  */
 static int gfar_probe(struct platform_device *ofdev)
 {
-	u32 tempval;
 	struct net_device *dev = NULL;
 	struct gfar_private *priv = NULL;
-	struct gfar __iomem *regs = NULL;
-	int err = 0, i, grp_idx = 0;
-	u32 rstat = 0, tstat = 0, rqueue = 0, tqueue = 0;
-	u32 isrg = 0;
-	u32 __iomem *baddr;
+	int err = 0, i;
 
 	err = gfar_of_init(ofdev, &dev);
 
@@ -1034,7 +1125,6 @@ static int gfar_probe(struct platform_device *ofdev)
 	INIT_WORK(&priv->reset_task, gfar_reset_task);
 
 	platform_set_drvdata(ofdev, priv);
-	regs = priv->gfargrp[0].regs;
 
 	gfar_detect_errata(priv);
 
@@ -1043,33 +1133,10 @@ static int gfar_probe(struct platform_device *ofdev)
 	 */
 	gfar_halt(dev);
 
-	/* Reset MAC layer */
-	gfar_write(&regs->maccfg1, MACCFG1_SOFT_RESET);
-
-	/* We need to delay at least 3 TX clocks */
-	udelay(2);
-
-	tempval = 0;
-	if (!priv->pause_aneg_en && priv->tx_pause_en)
-		tempval |= MACCFG1_TX_FLOW;
-	if (!priv->pause_aneg_en && priv->rx_pause_en)
-		tempval |= MACCFG1_RX_FLOW;
-	/* the soft reset bit is not self-resetting, so we need to
-	 * clear it before resuming normal operation
-	 */
-	gfar_write(&regs->maccfg1, tempval);
-
-	/* Initialize MACCFG2. */
-	tempval = MACCFG2_INIT_SETTINGS;
-	if (gfar_has_errata(priv, GFAR_ERRATA_74))
-		tempval |= MACCFG2_HUGEFRAME | MACCFG2_LENGTHCHECK;
-	gfar_write(&regs->maccfg2, tempval);
-
-	/* Initialize ECNTRL */
-	gfar_write(&regs->ecntrl, ECNTRL_INIT_SETTINGS);
+	gfar_hw_init(priv);
 
 	/* Set the dev->base_addr to the gfar reg region */
-	dev->base_addr = (unsigned long) regs;
+	dev->base_addr = (unsigned long) priv->gfargrp[0].regs;
 
 	/* Fill in the dev structure */
 	dev->watchdog_timeo = TX_TIMEOUT;
@@ -1099,40 +1166,7 @@ static int gfar_probe(struct platform_device *ofdev)
 		dev->features |= NETIF_F_HW_VLAN_CTAG_RX;
 	}
 
-	if (priv->device_flags & FSL_GIANFAR_DEV_HAS_EXTENDED_HASH) {
-		priv->extended_hash = 1;
-		priv->hash_width = 9;
-
-		priv->hash_regs[0] = &regs->igaddr0;
-		priv->hash_regs[1] = &regs->igaddr1;
-		priv->hash_regs[2] = &regs->igaddr2;
-		priv->hash_regs[3] = &regs->igaddr3;
-		priv->hash_regs[4] = &regs->igaddr4;
-		priv->hash_regs[5] = &regs->igaddr5;
-		priv->hash_regs[6] = &regs->igaddr6;
-		priv->hash_regs[7] = &regs->igaddr7;
-		priv->hash_regs[8] = &regs->gaddr0;
-		priv->hash_regs[9] = &regs->gaddr1;
-		priv->hash_regs[10] = &regs->gaddr2;
-		priv->hash_regs[11] = &regs->gaddr3;
-		priv->hash_regs[12] = &regs->gaddr4;
-		priv->hash_regs[13] = &regs->gaddr5;
-		priv->hash_regs[14] = &regs->gaddr6;
-		priv->hash_regs[15] = &regs->gaddr7;
-
-	} else {
-		priv->extended_hash = 0;
-		priv->hash_width = 8;
-
-		priv->hash_regs[0] = &regs->gaddr0;
-		priv->hash_regs[1] = &regs->gaddr1;
-		priv->hash_regs[2] = &regs->gaddr2;
-		priv->hash_regs[3] = &regs->gaddr3;
-		priv->hash_regs[4] = &regs->gaddr4;
-		priv->hash_regs[5] = &regs->gaddr5;
-		priv->hash_regs[6] = &regs->gaddr6;
-		priv->hash_regs[7] = &regs->gaddr7;
-	}
+	gfar_init_addr_hash_table(priv);
 
 	if (priv->device_flags & FSL_GIANFAR_DEV_HAS_PADDING)
 		priv->padding = DEFAULT_PADDING;
@@ -1143,59 +1177,6 @@ static int gfar_probe(struct platform_device *ofdev)
 	    priv->device_flags & FSL_GIANFAR_DEV_HAS_TIMER)
 		dev->needed_headroom = GMAC_FCB_LEN;
 
-	/* Program the isrg regs only if number of grps > 1 */
-	if (priv->num_grps > 1) {
-		baddr = &regs->isrg0;
-		for (i = 0; i < priv->num_grps; i++) {
-			isrg |= (priv->gfargrp[i].rx_bit_map << ISRG_SHIFT_RX);
-			isrg |= (priv->gfargrp[i].tx_bit_map << ISRG_SHIFT_TX);
-			gfar_write(baddr, isrg);
-			baddr++;
-			isrg = 0x0;
-		}
-	}
-
-	/* Need to reverse the bit maps as  bit_map's MSB is q0
-	 * but, for_each_set_bit parses from right to left, which
-	 * basically reverses the queue numbers
-	 */
-	for (i = 0; i< priv->num_grps; i++) {
-		priv->gfargrp[i].tx_bit_map =
-			reverse_bitmap(priv->gfargrp[i].tx_bit_map, MAX_TX_QS);
-		priv->gfargrp[i].rx_bit_map =
-			reverse_bitmap(priv->gfargrp[i].rx_bit_map, MAX_RX_QS);
-	}
-
-	/* Calculate RSTAT, TSTAT, RQUEUE and TQUEUE values,
-	 * also assign queues to groups
-	 */
-	for (grp_idx = 0; grp_idx < priv->num_grps; grp_idx++) {
-		priv->gfargrp[grp_idx].num_rx_queues = 0x0;
-
-		for_each_set_bit(i, &priv->gfargrp[grp_idx].rx_bit_map,
-				 priv->num_rx_queues) {
-			priv->gfargrp[grp_idx].num_rx_queues++;
-			priv->rx_queue[i]->grp = &priv->gfargrp[grp_idx];
-			rstat = rstat | (RSTAT_CLEAR_RHALT >> i);
-			rqueue = rqueue | ((RQUEUE_EN0 | RQUEUE_EX0) >> i);
-		}
-		priv->gfargrp[grp_idx].num_tx_queues = 0x0;
-
-		for_each_set_bit(i, &priv->gfargrp[grp_idx].tx_bit_map,
-				 priv->num_tx_queues) {
-			priv->gfargrp[grp_idx].num_tx_queues++;
-			priv->tx_queue[i]->grp = &priv->gfargrp[grp_idx];
-			tstat = tstat | (TSTAT_CLEAR_THALT >> i);
-			tqueue = tqueue | (TQUEUE_EN0 >> i);
-		}
-		priv->gfargrp[grp_idx].rstat = rstat;
-		priv->gfargrp[grp_idx].tstat = tstat;
-		rstat = tstat =0;
-	}
-
-	gfar_write(&regs->rqueue, rqueue);
-	gfar_write(&regs->tqueue, tqueue);
-
 	priv->rx_buffer_size = DEFAULT_RX_BUFFER_SIZE;
 
 	/* Initializing some of the rx/tx queue level parameters */
@@ -1272,8 +1253,8 @@ static int gfar_probe(struct platform_device *ofdev)
 
 register_fail:
 	unmap_group_regs(priv);
-	free_tx_pointers(priv);
-	free_rx_pointers(priv);
+	gfar_free_rx_queues(priv);
+	gfar_free_tx_queues(priv);
 	if (priv->phy_node)
 		of_node_put(priv->phy_node);
 	if (priv->tbi_node)
@@ -1293,6 +1274,8 @@ static int gfar_remove(struct platform_device *ofdev)
 
 	unregister_netdev(priv->ndev);
 	unmap_group_regs(priv);
+	gfar_free_rx_queues(priv);
+	gfar_free_tx_queues(priv);
 	free_gfar_dev(priv);
 
 	return 0;
diff --git a/drivers/net/ethernet/freescale/gianfar.h b/drivers/net/ethernet/freescale/gianfar.h
index 52bb2b0195cc..63c830c3181b 100644
--- a/drivers/net/ethernet/freescale/gianfar.h
+++ b/drivers/net/ethernet/freescale/gianfar.h
@@ -9,7 +9,7 @@
  * Maintainer: Kumar Gala
  * Modifier: Sandeep Gopalpet <sandeep.kumar@freescale.com>
  *
- * Copyright 2002-2009, 2011 Freescale Semiconductor, Inc.
+ * Copyright 2002-2009, 2011-2013 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -892,8 +892,8 @@ struct gfar {
 #define DEFAULT_MAPPING 	0xFF
 #endif
 
-#define ISRG_SHIFT_TX	0x10
-#define ISRG_SHIFT_RX	0x18
+#define ISRG_RR0	0x80000000
+#define ISRG_TR0	0x00800000
 
 /* The same driver can operate in two modes */
 /* SQ_SG_MODE: Single Queue Single Group Mode
@@ -1113,6 +1113,9 @@ struct gfar_private {
 	unsigned int total_tx_ring_size;
 	unsigned int total_rx_ring_size;
 
+	u32 rqueue;
+	u32 tqueue;
+
 	/* RX per device parameters */
 	unsigned int rx_stash_size;
 	unsigned int rx_stash_index;
@@ -1176,6 +1179,31 @@ static inline void gfar_read_filer(struct gfar_private *priv,
 	*fpr = gfar_read(&regs->rqfpr);
 }
 
+static inline void gfar_write_isrg(struct gfar_private *priv)
+{
+	struct gfar __iomem *regs = priv->gfargrp[0].regs;
+	u32 __iomem *baddr = &regs->isrg0;
+	u32 isrg = 0;
+	int grp_idx, i;
+
+	for (grp_idx = 0; grp_idx < priv->num_grps; grp_idx++) {
+		struct gfar_priv_grp *grp = &priv->gfargrp[grp_idx];
+
+		for_each_set_bit(i, &grp->rx_bit_map, priv->num_rx_queues) {
+			isrg |= (ISRG_RR0 >> i);
+		}
+
+		for_each_set_bit(i, &grp->tx_bit_map, priv->num_tx_queues) {
+			isrg |= (ISRG_TR0 >> i);
+		}
+
+		gfar_write(baddr, isrg);
+
+		baddr++;
+		isrg = 0;
+	}
+}
+
 void lock_rx_qs(struct gfar_private *priv);
 void lock_tx_qs(struct gfar_private *priv);
 void unlock_rx_qs(struct gfar_private *priv);
-- 
cgit v1.2.2


From 34018fd419f1ca364bbd509e937357a5e05289ff Mon Sep 17 00:00:00 2001
From: Claudiu Manoil <claudiu.manoil@freescale.com>
Date: Mon, 17 Feb 2014 12:53:15 +0200
Subject: gianfar: Remove sysfs stubs for FIFOCFG and stashing

Removing the sysfs stubs for the Tx FIFOCFG and ATTRELI
(stashing) config registers, as these registers may only
be configured after a MAC reset, with the controller stopped
(i.e. during hw init, at probe() time).  The current sysfs
stubs allow on-the-fly updates of these registers (the locking
measures are useless and only add unecessary code).

Changing these registers is discouraged. Only the default values
will be used instead.

Moreover, the stashing (ATTRELI) configuration options were
effectively disabled (didn't get to the hw anyway if changed)
because the stashing device_flags (HAS_BD_STASHING|HAS_BUF_STASHING)
were "accidentally" cleared during probe().

Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/freescale/Makefile        |   3 +-
 drivers/net/ethernet/freescale/gianfar.c       |  57 ++---
 drivers/net/ethernet/freescale/gianfar.h       |   6 -
 drivers/net/ethernet/freescale/gianfar_sysfs.c | 340 -------------------------
 4 files changed, 28 insertions(+), 378 deletions(-)
 delete mode 100644 drivers/net/ethernet/freescale/gianfar_sysfs.c

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/freescale/Makefile b/drivers/net/ethernet/freescale/Makefile
index 549ce13b92ac..71debd1c18c9 100644
--- a/drivers/net/ethernet/freescale/Makefile
+++ b/drivers/net/ethernet/freescale/Makefile
@@ -14,7 +14,6 @@ obj-$(CONFIG_FSL_XGMAC_MDIO) += xgmac_mdio.o
 obj-$(CONFIG_GIANFAR) += gianfar_driver.o
 obj-$(CONFIG_PTP_1588_CLOCK_GIANFAR) += gianfar_ptp.o
 gianfar_driver-objs := gianfar.o \
-		gianfar_ethtool.o \
-		gianfar_sysfs.o
+		gianfar_ethtool.o
 obj-$(CONFIG_UCC_GETH) += ucc_geth_driver.o
 ucc_geth_driver-objs := ucc_geth.o ucc_geth_ethtool.o
diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index ab915b060d4c..9b12201d396d 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -338,7 +338,6 @@ static void gfar_init_mac(struct net_device *ndev)
 	struct gfar __iomem *regs = priv->gfargrp[0].regs;
 	u32 rctrl = 0;
 	u32 tctrl = 0;
-	u32 attrs = 0;
 
 	/* write the tx/rx base registers */
 	gfar_init_tx_rx_base(priv);
@@ -409,29 +408,6 @@ static void gfar_init_mac(struct net_device *ndev)
 	}
 
 	gfar_write(&regs->tctrl, tctrl);
-
-	/* Set the extraction length and index */
-	attrs = ATTRELI_EL(priv->rx_stash_size) |
-		ATTRELI_EI(priv->rx_stash_index);
-
-	gfar_write(&regs->attreli, attrs);
-
-	/* Start with defaults, and add stashing or locking
-	 * depending on the approprate variables
-	 */
-	attrs = ATTR_INIT_SETTINGS;
-
-	if (priv->bd_stash_en)
-		attrs |= ATTR_BDSTASH;
-
-	if (priv->rx_stash_size != 0)
-		attrs |= ATTR_BUFSTASH;
-
-	gfar_write(&regs->attr, attrs);
-
-	gfar_write(&regs->fifo_tx_thr, priv->fifo_threshold);
-	gfar_write(&regs->fifo_tx_starve, priv->fifo_starve);
-	gfar_write(&regs->fifo_tx_starve_shutoff, priv->fifo_starve_off);
 }
 
 static struct net_device_stats *gfar_get_stats(struct net_device *dev)
@@ -784,13 +760,13 @@ static int gfar_of_init(struct platform_device *ofdev, struct net_device **pdev)
 		memcpy(dev->dev_addr, mac_addr, ETH_ALEN);
 
 	if (model && !strcasecmp(model, "TSEC"))
-		priv->device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT |
+		priv->device_flags |= FSL_GIANFAR_DEV_HAS_GIGABIT |
 				     FSL_GIANFAR_DEV_HAS_COALESCE |
 				     FSL_GIANFAR_DEV_HAS_RMON |
 				     FSL_GIANFAR_DEV_HAS_MULTI_INTR;
 
 	if (model && !strcasecmp(model, "eTSEC"))
-		priv->device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT |
+		priv->device_flags |= FSL_GIANFAR_DEV_HAS_GIGABIT |
 				     FSL_GIANFAR_DEV_HAS_COALESCE |
 				     FSL_GIANFAR_DEV_HAS_RMON |
 				     FSL_GIANFAR_DEV_HAS_MULTI_INTR |
@@ -1030,7 +1006,7 @@ static void gfar_detect_errata(struct gfar_private *priv)
 static void gfar_hw_init(struct gfar_private *priv)
 {
 	struct gfar __iomem *regs = priv->gfargrp[0].regs;
-	u32 tempval;
+	u32 tempval, attrs;
 
 	/* Reset MAC layer */
 	gfar_write(&regs->maccfg1, MACCFG1_SOFT_RESET);
@@ -1052,6 +1028,30 @@ static void gfar_hw_init(struct gfar_private *priv)
 	/* Initialize ECNTRL */
 	gfar_write(&regs->ecntrl, ECNTRL_INIT_SETTINGS);
 
+	/* Set the extraction length and index */
+	attrs = ATTRELI_EL(priv->rx_stash_size) |
+		ATTRELI_EI(priv->rx_stash_index);
+
+	gfar_write(&regs->attreli, attrs);
+
+	/* Start with defaults, and add stashing
+	 * depending on driver parameters
+	 */
+	attrs = ATTR_INIT_SETTINGS;
+
+	if (priv->bd_stash_en)
+		attrs |= ATTR_BDSTASH;
+
+	if (priv->rx_stash_size != 0)
+		attrs |= ATTR_BUFSTASH;
+
+	gfar_write(&regs->attr, attrs);
+
+	/* FIFO configs */
+	gfar_write(&regs->fifo_tx_thr, DEFAULT_FIFO_TX_THR);
+	gfar_write(&regs->fifo_tx_starve, DEFAULT_FIFO_TX_STARVE);
+	gfar_write(&regs->fifo_tx_starve_shutoff, DEFAULT_FIFO_TX_STARVE_OFF);
+
 	/* Program the interrupt steering regs, only for MG devices */
 	if (priv->num_grps > 1)
 		gfar_write_isrg(priv);
@@ -1232,9 +1232,6 @@ static int gfar_probe(struct platform_device *ofdev)
 	/* Initialize the filer table */
 	gfar_init_filer_table(priv);
 
-	/* Create all the sysfs files */
-	gfar_init_sysfs(dev);
-
 	/* Print out the device info */
 	netdev_info(dev, "mac: %pM\n", dev->dev_addr);
 
diff --git a/drivers/net/ethernet/freescale/gianfar.h b/drivers/net/ethernet/freescale/gianfar.h
index 63c830c3181b..de6e4f63dcb2 100644
--- a/drivers/net/ethernet/freescale/gianfar.h
+++ b/drivers/net/ethernet/freescale/gianfar.h
@@ -1130,11 +1130,6 @@ struct gfar_private {
 	u32 __iomem *hash_regs[16];
 	int hash_width;
 
-	/* global parameters */
-	unsigned int fifo_threshold;
-	unsigned int fifo_starve;
-	unsigned int fifo_starve_off;
-
 	/*Filer table*/
 	unsigned int ftp_rqfpr[MAX_FILER_IDX + 1];
 	unsigned int ftp_rqfcr[MAX_FILER_IDX + 1];
@@ -1215,7 +1210,6 @@ void gfar_halt(struct net_device *dev);
 void gfar_phy_test(struct mii_bus *bus, struct phy_device *phydev, int enable,
 		   u32 regnum, u32 read);
 void gfar_configure_coalescing_all(struct gfar_private *priv);
-void gfar_init_sysfs(struct net_device *dev);
 int gfar_set_features(struct net_device *dev, netdev_features_t features);
 void gfar_check_rx_parser_mode(struct gfar_private *priv);
 void gfar_vlan_mode(struct net_device *dev, netdev_features_t features);
diff --git a/drivers/net/ethernet/freescale/gianfar_sysfs.c b/drivers/net/ethernet/freescale/gianfar_sysfs.c
deleted file mode 100644
index e02dd1378751..000000000000
--- a/drivers/net/ethernet/freescale/gianfar_sysfs.c
+++ /dev/null
@@ -1,340 +0,0 @@
-/*
- * drivers/net/ethernet/freescale/gianfar_sysfs.c
- *
- * Gianfar Ethernet Driver
- * This driver is designed for the non-CPM ethernet controllers
- * on the 85xx and 83xx family of integrated processors
- * Based on 8260_io/fcc_enet.c
- *
- * Author: Andy Fleming
- * Maintainer: Kumar Gala (galak@kernel.crashing.org)
- * Modifier: Sandeep Gopalpet <sandeep.kumar@freescale.com>
- *
- * Copyright 2002-2009 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- * Sysfs file creation and management
- */
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/unistd.h>
-#include <linux/delay.h>
-#include <linux/etherdevice.h>
-#include <linux/spinlock.h>
-#include <linux/mm.h>
-#include <linux/device.h>
-
-#include <asm/uaccess.h>
-#include <linux/module.h>
-
-#include "gianfar.h"
-
-static ssize_t gfar_show_bd_stash(struct device *dev,
-				  struct device_attribute *attr, char *buf)
-{
-	struct gfar_private *priv = netdev_priv(to_net_dev(dev));
-
-	return sprintf(buf, "%s\n", priv->bd_stash_en ? "on" : "off");
-}
-
-static ssize_t gfar_set_bd_stash(struct device *dev,
-				 struct device_attribute *attr,
-				 const char *buf, size_t count)
-{
-	struct gfar_private *priv = netdev_priv(to_net_dev(dev));
-	struct gfar __iomem *regs = priv->gfargrp[0].regs;
-	int new_setting = 0;
-	u32 temp;
-	unsigned long flags;
-
-	if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_BD_STASHING))
-		return count;
-
-
-	/* Find out the new setting */
-	if (!strncmp("on", buf, count - 1) || !strncmp("1", buf, count - 1))
-		new_setting = 1;
-	else if (!strncmp("off", buf, count - 1) ||
-		 !strncmp("0", buf, count - 1))
-		new_setting = 0;
-	else
-		return count;
-
-
-	local_irq_save(flags);
-	lock_rx_qs(priv);
-
-	/* Set the new stashing value */
-	priv->bd_stash_en = new_setting;
-
-	temp = gfar_read(&regs->attr);
-
-	if (new_setting)
-		temp |= ATTR_BDSTASH;
-	else
-		temp &= ~(ATTR_BDSTASH);
-
-	gfar_write(&regs->attr, temp);
-
-	unlock_rx_qs(priv);
-	local_irq_restore(flags);
-
-	return count;
-}
-
-static DEVICE_ATTR(bd_stash, 0644, gfar_show_bd_stash, gfar_set_bd_stash);
-
-static ssize_t gfar_show_rx_stash_size(struct device *dev,
-				       struct device_attribute *attr, char *buf)
-{
-	struct gfar_private *priv = netdev_priv(to_net_dev(dev));
-
-	return sprintf(buf, "%d\n", priv->rx_stash_size);
-}
-
-static ssize_t gfar_set_rx_stash_size(struct device *dev,
-				      struct device_attribute *attr,
-				      const char *buf, size_t count)
-{
-	struct gfar_private *priv = netdev_priv(to_net_dev(dev));
-	struct gfar __iomem *regs = priv->gfargrp[0].regs;
-	unsigned int length = simple_strtoul(buf, NULL, 0);
-	u32 temp;
-	unsigned long flags;
-
-	if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_BUF_STASHING))
-		return count;
-
-	local_irq_save(flags);
-	lock_rx_qs(priv);
-
-	if (length > priv->rx_buffer_size)
-		goto out;
-
-	if (length == priv->rx_stash_size)
-		goto out;
-
-	priv->rx_stash_size = length;
-
-	temp = gfar_read(&regs->attreli);
-	temp &= ~ATTRELI_EL_MASK;
-	temp |= ATTRELI_EL(length);
-	gfar_write(&regs->attreli, temp);
-
-	/* Turn stashing on/off as appropriate */
-	temp = gfar_read(&regs->attr);
-
-	if (length)
-		temp |= ATTR_BUFSTASH;
-	else
-		temp &= ~(ATTR_BUFSTASH);
-
-	gfar_write(&regs->attr, temp);
-
-out:
-	unlock_rx_qs(priv);
-	local_irq_restore(flags);
-
-	return count;
-}
-
-static DEVICE_ATTR(rx_stash_size, 0644, gfar_show_rx_stash_size,
-		   gfar_set_rx_stash_size);
-
-/* Stashing will only be enabled when rx_stash_size != 0 */
-static ssize_t gfar_show_rx_stash_index(struct device *dev,
-					struct device_attribute *attr,
-					char *buf)
-{
-	struct gfar_private *priv = netdev_priv(to_net_dev(dev));
-
-	return sprintf(buf, "%d\n", priv->rx_stash_index);
-}
-
-static ssize_t gfar_set_rx_stash_index(struct device *dev,
-				       struct device_attribute *attr,
-				       const char *buf, size_t count)
-{
-	struct gfar_private *priv = netdev_priv(to_net_dev(dev));
-	struct gfar __iomem *regs = priv->gfargrp[0].regs;
-	unsigned short index = simple_strtoul(buf, NULL, 0);
-	u32 temp;
-	unsigned long flags;
-
-	if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_BUF_STASHING))
-		return count;
-
-	local_irq_save(flags);
-	lock_rx_qs(priv);
-
-	if (index > priv->rx_stash_size)
-		goto out;
-
-	if (index == priv->rx_stash_index)
-		goto out;
-
-	priv->rx_stash_index = index;
-
-	temp = gfar_read(&regs->attreli);
-	temp &= ~ATTRELI_EI_MASK;
-	temp |= ATTRELI_EI(index);
-	gfar_write(&regs->attreli, temp);
-
-out:
-	unlock_rx_qs(priv);
-	local_irq_restore(flags);
-
-	return count;
-}
-
-static DEVICE_ATTR(rx_stash_index, 0644, gfar_show_rx_stash_index,
-		   gfar_set_rx_stash_index);
-
-static ssize_t gfar_show_fifo_threshold(struct device *dev,
-					struct device_attribute *attr,
-					char *buf)
-{
-	struct gfar_private *priv = netdev_priv(to_net_dev(dev));
-
-	return sprintf(buf, "%d\n", priv->fifo_threshold);
-}
-
-static ssize_t gfar_set_fifo_threshold(struct device *dev,
-				       struct device_attribute *attr,
-				       const char *buf, size_t count)
-{
-	struct gfar_private *priv = netdev_priv(to_net_dev(dev));
-	struct gfar __iomem *regs = priv->gfargrp[0].regs;
-	unsigned int length = simple_strtoul(buf, NULL, 0);
-	u32 temp;
-	unsigned long flags;
-
-	if (length > GFAR_MAX_FIFO_THRESHOLD)
-		return count;
-
-	local_irq_save(flags);
-	lock_tx_qs(priv);
-
-	priv->fifo_threshold = length;
-
-	temp = gfar_read(&regs->fifo_tx_thr);
-	temp &= ~FIFO_TX_THR_MASK;
-	temp |= length;
-	gfar_write(&regs->fifo_tx_thr, temp);
-
-	unlock_tx_qs(priv);
-	local_irq_restore(flags);
-
-	return count;
-}
-
-static DEVICE_ATTR(fifo_threshold, 0644, gfar_show_fifo_threshold,
-		   gfar_set_fifo_threshold);
-
-static ssize_t gfar_show_fifo_starve(struct device *dev,
-				     struct device_attribute *attr, char *buf)
-{
-	struct gfar_private *priv = netdev_priv(to_net_dev(dev));
-
-	return sprintf(buf, "%d\n", priv->fifo_starve);
-}
-
-static ssize_t gfar_set_fifo_starve(struct device *dev,
-				    struct device_attribute *attr,
-				    const char *buf, size_t count)
-{
-	struct gfar_private *priv = netdev_priv(to_net_dev(dev));
-	struct gfar __iomem *regs = priv->gfargrp[0].regs;
-	unsigned int num = simple_strtoul(buf, NULL, 0);
-	u32 temp;
-	unsigned long flags;
-
-	if (num > GFAR_MAX_FIFO_STARVE)
-		return count;
-
-	local_irq_save(flags);
-	lock_tx_qs(priv);
-
-	priv->fifo_starve = num;
-
-	temp = gfar_read(&regs->fifo_tx_starve);
-	temp &= ~FIFO_TX_STARVE_MASK;
-	temp |= num;
-	gfar_write(&regs->fifo_tx_starve, temp);
-
-	unlock_tx_qs(priv);
-	local_irq_restore(flags);
-
-	return count;
-}
-
-static DEVICE_ATTR(fifo_starve, 0644, gfar_show_fifo_starve,
-		   gfar_set_fifo_starve);
-
-static ssize_t gfar_show_fifo_starve_off(struct device *dev,
-					 struct device_attribute *attr,
-					 char *buf)
-{
-	struct gfar_private *priv = netdev_priv(to_net_dev(dev));
-
-	return sprintf(buf, "%d\n", priv->fifo_starve_off);
-}
-
-static ssize_t gfar_set_fifo_starve_off(struct device *dev,
-					struct device_attribute *attr,
-					const char *buf, size_t count)
-{
-	struct gfar_private *priv = netdev_priv(to_net_dev(dev));
-	struct gfar __iomem *regs = priv->gfargrp[0].regs;
-	unsigned int num = simple_strtoul(buf, NULL, 0);
-	u32 temp;
-	unsigned long flags;
-
-	if (num > GFAR_MAX_FIFO_STARVE_OFF)
-		return count;
-
-	local_irq_save(flags);
-	lock_tx_qs(priv);
-
-	priv->fifo_starve_off = num;
-
-	temp = gfar_read(&regs->fifo_tx_starve_shutoff);
-	temp &= ~FIFO_TX_STARVE_OFF_MASK;
-	temp |= num;
-	gfar_write(&regs->fifo_tx_starve_shutoff, temp);
-
-	unlock_tx_qs(priv);
-	local_irq_restore(flags);
-
-	return count;
-}
-
-static DEVICE_ATTR(fifo_starve_off, 0644, gfar_show_fifo_starve_off,
-		   gfar_set_fifo_starve_off);
-
-void gfar_init_sysfs(struct net_device *dev)
-{
-	struct gfar_private *priv = netdev_priv(dev);
-	int rc;
-
-	/* Initialize the default values */
-	priv->fifo_threshold = DEFAULT_FIFO_TX_THR;
-	priv->fifo_starve = DEFAULT_FIFO_TX_STARVE;
-	priv->fifo_starve_off = DEFAULT_FIFO_TX_STARVE_OFF;
-
-	/* Create our sysfs files */
-	rc = device_create_file(&dev->dev, &dev_attr_bd_stash);
-	rc |= device_create_file(&dev->dev, &dev_attr_rx_stash_size);
-	rc |= device_create_file(&dev->dev, &dev_attr_rx_stash_index);
-	rc |= device_create_file(&dev->dev, &dev_attr_fifo_threshold);
-	rc |= device_create_file(&dev->dev, &dev_attr_fifo_starve);
-	rc |= device_create_file(&dev->dev, &dev_attr_fifo_starve_off);
-	if (rc)
-		dev_err(&dev->dev, "Error creating gianfar sysfs files\n");
-}
-- 
cgit v1.2.2


From 532c37bcb7007f5140b7251152e7a9433a65d520 Mon Sep 17 00:00:00 2001
From: Claudiu Manoil <claudiu.manoil@freescale.com>
Date: Mon, 17 Feb 2014 12:53:16 +0200
Subject: gianfar: Remove useless HAS_PADDING device flag

The RCTRL updates of the FSL_GIANFAR_DEV_HAS_PADDING device
flag get overriden by the FSL_GIANFAR_DEV_HAS_TIMER flag
settings, which impose a Rx padding alignment of 8 bytes.
As all the eTSEC devices that set HAS_PADDING also set the
HAS_TIMER flag, the HAS_PADDING flag is now obsolete.

Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/freescale/gianfar.c | 15 +++------------
 drivers/net/ethernet/freescale/gianfar.h |  1 -
 2 files changed, 3 insertions(+), 13 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index 9b12201d396d..987f3234d23b 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -375,13 +375,6 @@ static void gfar_init_mac(struct net_device *ndev)
 		rctrl |= RCTRL_PADDING(priv->padding);
 	}
 
-	/* Insert receive time stamps into padding alignment bytes */
-	if (priv->device_flags & FSL_GIANFAR_DEV_HAS_TIMER) {
-		rctrl &= ~RCTRL_PAL_MASK;
-		rctrl |= RCTRL_PADDING(8);
-		priv->padding = 8;
-	}
-
 	/* Enable HW time stamping if requested from user space */
 	if (priv->hwts_rx_en) {
 		rctrl |= RCTRL_PRSDEP_INIT | RCTRL_TS_ENABLE;
@@ -770,7 +763,6 @@ static int gfar_of_init(struct platform_device *ofdev, struct net_device **pdev)
 				     FSL_GIANFAR_DEV_HAS_COALESCE |
 				     FSL_GIANFAR_DEV_HAS_RMON |
 				     FSL_GIANFAR_DEV_HAS_MULTI_INTR |
-				     FSL_GIANFAR_DEV_HAS_PADDING |
 				     FSL_GIANFAR_DEV_HAS_CSUM |
 				     FSL_GIANFAR_DEV_HAS_VLAN |
 				     FSL_GIANFAR_DEV_HAS_MAGIC_PACKET |
@@ -1168,10 +1160,9 @@ static int gfar_probe(struct platform_device *ofdev)
 
 	gfar_init_addr_hash_table(priv);
 
-	if (priv->device_flags & FSL_GIANFAR_DEV_HAS_PADDING)
-		priv->padding = DEFAULT_PADDING;
-	else
-		priv->padding = 0;
+	/* Insert receive time stamps into padding alignment bytes */
+	if (priv->device_flags & FSL_GIANFAR_DEV_HAS_TIMER)
+		priv->padding = 8;
 
 	if (dev->features & NETIF_F_IP_CSUM ||
 	    priv->device_flags & FSL_GIANFAR_DEV_HAS_TIMER)
diff --git a/drivers/net/ethernet/freescale/gianfar.h b/drivers/net/ethernet/freescale/gianfar.h
index de6e4f63dcb2..53e34662b90e 100644
--- a/drivers/net/ethernet/freescale/gianfar.h
+++ b/drivers/net/ethernet/freescale/gianfar.h
@@ -880,7 +880,6 @@ struct gfar {
 #define FSL_GIANFAR_DEV_HAS_CSUM		0x00000010
 #define FSL_GIANFAR_DEV_HAS_VLAN		0x00000020
 #define FSL_GIANFAR_DEV_HAS_EXTENDED_HASH	0x00000040
-#define FSL_GIANFAR_DEV_HAS_PADDING		0x00000080
 #define FSL_GIANFAR_DEV_HAS_MAGIC_PACKET	0x00000100
 #define FSL_GIANFAR_DEV_HAS_BD_STASHING		0x00000200
 #define FSL_GIANFAR_DEV_HAS_BUF_STASHING	0x00000400
-- 
cgit v1.2.2


From efeddce7ea7c75a53b3084d71db15657a00e94dc Mon Sep 17 00:00:00 2001
From: Claudiu Manoil <claudiu.manoil@freescale.com>
Date: Mon, 17 Feb 2014 12:53:17 +0200
Subject: gianfar: Factor out enabling/disabling of hw interrupts

Throughout the code there are places where the controller's
hw interrupt sources need to get disabled/enabled (masked/
un-masked) all at once.  The recommendation for disabling
the interrupts is to clear the ievent first then the imask
register (not the other way around).
Use the gfar_ints_enable/disable() helpers to make these
operations consistent.

Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/freescale/gianfar.c | 60 ++++++++++++++++----------------
 1 file changed, 30 insertions(+), 30 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index 987f3234d23b..385de8064371 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -448,6 +448,29 @@ static const struct net_device_ops gfar_netdev_ops = {
 #endif
 };
 
+static void gfar_ints_disable(struct gfar_private *priv)
+{
+	int i;
+	for (i = 0; i < priv->num_grps; i++) {
+		struct gfar __iomem *regs = priv->gfargrp[i].regs;
+		/* Clear IEVENT */
+		gfar_write(&regs->ievent, IEVENT_INIT_CLEAR);
+
+		/* Initialize IMASK */
+		gfar_write(&regs->imask, IMASK_INIT_CLEAR);
+	}
+}
+
+static void gfar_ints_enable(struct gfar_private *priv)
+{
+	int i;
+	for (i = 0; i < priv->num_grps; i++) {
+		struct gfar __iomem *regs = priv->gfargrp[i].regs;
+		/* Unmask the interrupts we look for */
+		gfar_write(&regs->imask, IMASK_DEFAULT);
+	}
+}
+
 void lock_rx_qs(struct gfar_private *priv)
 {
 	int i;
@@ -1548,19 +1571,10 @@ static void gfar_configure_serdes(struct net_device *dev)
 static void init_registers(struct net_device *dev)
 {
 	struct gfar_private *priv = netdev_priv(dev);
-	struct gfar __iomem *regs = NULL;
-	int i;
-
-	for (i = 0; i < priv->num_grps; i++) {
-		regs = priv->gfargrp[i].regs;
-		/* Clear IEVENT */
-		gfar_write(&regs->ievent, IEVENT_INIT_CLEAR);
+	struct gfar __iomem *regs = priv->gfargrp[0].regs;
 
-		/* Initialize IMASK */
-		gfar_write(&regs->imask, IMASK_INIT_CLEAR);
-	}
+	gfar_ints_disable(priv);
 
-	regs = priv->gfargrp[0].regs;
 	/* Init hash registers to zero */
 	gfar_write(&regs->igaddr0, 0);
 	gfar_write(&regs->igaddr1, 0);
@@ -1622,20 +1636,11 @@ static int __gfar_is_rx_idle(struct gfar_private *priv)
 static void gfar_halt_nodisable(struct net_device *dev)
 {
 	struct gfar_private *priv = netdev_priv(dev);
-	struct gfar __iomem *regs = NULL;
+	struct gfar __iomem *regs = priv->gfargrp[0].regs;
 	u32 tempval;
-	int i;
-
-	for (i = 0; i < priv->num_grps; i++) {
-		regs = priv->gfargrp[i].regs;
-		/* Mask all interrupts */
-		gfar_write(&regs->imask, IMASK_INIT_CLEAR);
 
-		/* Clear all interrupts */
-		gfar_write(&regs->ievent, IEVENT_INIT_CLEAR);
-	}
+	gfar_ints_disable(priv);
 
-	regs = priv->gfargrp[0].regs;
 	/* Stop the DMA, and wait for it to stop */
 	tempval = gfar_read(&regs->dmactrl);
 	if ((tempval & (DMACTRL_GRS | DMACTRL_GTS)) !=
@@ -1823,10 +1828,10 @@ void gfar_start(struct net_device *dev)
 		/* Clear THLT/RHLT, so that the DMA starts polling now */
 		gfar_write(&regs->tstat, priv->gfargrp[i].tstat);
 		gfar_write(&regs->rstat, priv->gfargrp[i].rstat);
-		/* Unmask the interrupts we look for */
-		gfar_write(&regs->imask, IMASK_DEFAULT);
 	}
 
+	gfar_ints_enable(priv);
+
 	dev->trans_start = jiffies; /* prevent tx timeout */
 }
 
@@ -1931,15 +1936,10 @@ err_irq_fail:
 int startup_gfar(struct net_device *ndev)
 {
 	struct gfar_private *priv = netdev_priv(ndev);
-	struct gfar __iomem *regs = NULL;
 	int err, i, j;
 
-	for (i = 0; i < priv->num_grps; i++) {
-		regs= priv->gfargrp[i].regs;
-		gfar_write(&regs->imask, IMASK_INIT_CLEAR);
-	}
+	gfar_ints_disable(priv);
 
-	regs= priv->gfargrp[0].regs;
 	err = gfar_alloc_skb_resources(ndev);
 	if (err)
 		return err;
-- 
cgit v1.2.2


From c10650b661b6c43c82c8e91b1d0b9b6adcf7f7dc Mon Sep 17 00:00:00 2001
From: Claudiu Manoil <claudiu.manoil@freescale.com>
Date: Mon, 17 Feb 2014 12:53:18 +0200
Subject: gianfar: Add missing graceful reset steps and fixes

gfar_halt() and gfar_start() are responsible for stopping
and starting the DMA and the Rx/Tx hw rings. They implement
the support for the "graceful Rx/Tx stop/start" hw procedure,
and also disable/enable eTSEC's hw interrupts in the process.

The GRS/GTS procedure requires however to have the RQUEUE/TQUEUE
registers cleared first and to wait for a period of time for the
current frame to pass through the interface (around ~10ms for a
jumbo frame). Only then may the GTS and GRS bits from DMACTRL be
set to shut down the DMA, and finally the Tx_EN and Rx_EN bits in
MACCFG1 may be cleared to disable the Tx/Rx blocks.

The same register programming order applies to start the Rx/Tx:
enabling the RQUEUE/TQUEUE *before* clearing the GRS/GTS bits.

This is a HW recommendation in order to avoid a possible
controller "lock up" during graceful reset.

Cleanup the gfar_halt()/start() prototypes, to take priv instead
of ndev as their purpose is to operate on HW. Enabling the
RQUEUE/TQUEUE in the hw_init() is not needed anymore since
that's the job of gfar_start().

Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/freescale/gianfar.c         | 53 ++++++++++++------------
 drivers/net/ethernet/freescale/gianfar.h         |  3 +-
 drivers/net/ethernet/freescale/gianfar_ethtool.c |  5 +--
 3 files changed, 31 insertions(+), 30 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index 385de8064371..a2977a8df645 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -138,9 +138,7 @@ int gfar_clean_rx_ring(struct gfar_priv_rx_q *rx_queue, int rx_work_limit);
 static void gfar_clean_tx_ring(struct gfar_priv_tx_q *tx_queue);
 static void gfar_process_frame(struct net_device *dev, struct sk_buff *skb,
 			       int amount_pull, struct napi_struct *napi);
-void gfar_halt(struct net_device *dev);
-static void gfar_halt_nodisable(struct net_device *dev);
-void gfar_start(struct net_device *dev);
+static void gfar_halt_nodisable(struct gfar_private *priv);
 static void gfar_clear_exact_match(struct net_device *dev);
 static void gfar_set_mac_for_addr(struct net_device *dev, int num,
 				  const u8 *addr);
@@ -1070,10 +1068,6 @@ static void gfar_hw_init(struct gfar_private *priv)
 	/* Program the interrupt steering regs, only for MG devices */
 	if (priv->num_grps > 1)
 		gfar_write_isrg(priv);
-
-	/* Enable all Rx/Tx queues after MAC reset */
-	gfar_write(&regs->rqueue, priv->rqueue);
-	gfar_write(&regs->tqueue, priv->tqueue);
 }
 
 static void __init gfar_init_addr_hash_table(struct gfar_private *priv)
@@ -1146,7 +1140,7 @@ static int gfar_probe(struct platform_device *ofdev)
 	/* Stop the DMA engine now, in case it was running before
 	 * (The firmware could have used it, and left it running).
 	 */
-	gfar_halt(dev);
+	gfar_halt(priv);
 
 	gfar_hw_init(priv);
 
@@ -1314,7 +1308,7 @@ static int gfar_suspend(struct device *dev)
 		lock_tx_qs(priv);
 		lock_rx_qs(priv);
 
-		gfar_halt_nodisable(ndev);
+		gfar_halt_nodisable(priv);
 
 		/* Disable Tx, and Rx if wake-on-LAN is disabled. */
 		tempval = gfar_read(&regs->maccfg1);
@@ -1378,7 +1372,7 @@ static int gfar_resume(struct device *dev)
 	tempval &= ~MACCFG2_MPEN;
 	gfar_write(&regs->maccfg2, tempval);
 
-	gfar_start(ndev);
+	gfar_start(priv);
 
 	unlock_rx_qs(priv);
 	unlock_tx_qs(priv);
@@ -1410,7 +1404,7 @@ static int gfar_restore(struct device *dev)
 	init_registers(ndev);
 	gfar_set_mac_address(ndev);
 	gfar_init_mac(ndev);
-	gfar_start(ndev);
+	gfar_start(priv);
 
 	priv->oldlink = 0;
 	priv->oldspeed = 0;
@@ -1633,9 +1627,8 @@ static int __gfar_is_rx_idle(struct gfar_private *priv)
 }
 
 /* Halt the receive and transmit queues */
-static void gfar_halt_nodisable(struct net_device *dev)
+static void gfar_halt_nodisable(struct gfar_private *priv)
 {
-	struct gfar_private *priv = netdev_priv(dev);
 	struct gfar __iomem *regs = priv->gfargrp[0].regs;
 	u32 tempval;
 
@@ -1661,15 +1654,20 @@ static void gfar_halt_nodisable(struct net_device *dev)
 }
 
 /* Halt the receive and transmit queues */
-void gfar_halt(struct net_device *dev)
+void gfar_halt(struct gfar_private *priv)
 {
-	struct gfar_private *priv = netdev_priv(dev);
 	struct gfar __iomem *regs = priv->gfargrp[0].regs;
 	u32 tempval;
 
-	gfar_halt_nodisable(dev);
+	/* Dissable the Rx/Tx hw queues */
+	gfar_write(&regs->rqueue, 0);
+	gfar_write(&regs->tqueue, 0);
 
-	/* Disable Rx and Tx */
+	mdelay(10);
+
+	gfar_halt_nodisable(priv);
+
+	/* Disable Rx/Tx DMA */
 	tempval = gfar_read(&regs->maccfg1);
 	tempval &= ~(MACCFG1_RX_EN | MACCFG1_TX_EN);
 	gfar_write(&regs->maccfg1, tempval);
@@ -1696,7 +1694,7 @@ void stop_gfar(struct net_device *dev)
 	lock_tx_qs(priv);
 	lock_rx_qs(priv);
 
-	gfar_halt(dev);
+	gfar_halt(priv);
 
 	unlock_rx_qs(priv);
 	unlock_tx_qs(priv);
@@ -1801,17 +1799,15 @@ static void free_skb_resources(struct gfar_private *priv)
 			  priv->tx_queue[0]->tx_bd_dma_base);
 }
 
-void gfar_start(struct net_device *dev)
+void gfar_start(struct gfar_private *priv)
 {
-	struct gfar_private *priv = netdev_priv(dev);
 	struct gfar __iomem *regs = priv->gfargrp[0].regs;
 	u32 tempval;
 	int i = 0;
 
-	/* Enable Rx and Tx in MACCFG1 */
-	tempval = gfar_read(&regs->maccfg1);
-	tempval |= (MACCFG1_RX_EN | MACCFG1_TX_EN);
-	gfar_write(&regs->maccfg1, tempval);
+	/* Enable Rx/Tx hw queues */
+	gfar_write(&regs->rqueue, priv->rqueue);
+	gfar_write(&regs->tqueue, priv->tqueue);
 
 	/* Initialize DMACTRL to have WWR and WOP */
 	tempval = gfar_read(&regs->dmactrl);
@@ -1830,9 +1826,14 @@ void gfar_start(struct net_device *dev)
 		gfar_write(&regs->rstat, priv->gfargrp[i].rstat);
 	}
 
+	/* Enable Rx/Tx DMA */
+	tempval = gfar_read(&regs->maccfg1);
+	tempval |= (MACCFG1_RX_EN | MACCFG1_TX_EN);
+	gfar_write(&regs->maccfg1, tempval);
+
 	gfar_ints_enable(priv);
 
-	dev->trans_start = jiffies; /* prevent tx timeout */
+	priv->ndev->trans_start = jiffies; /* prevent tx timeout */
 }
 
 static void gfar_configure_coalescing(struct gfar_private *priv,
@@ -1956,7 +1957,7 @@ int startup_gfar(struct net_device *ndev)
 	}
 
 	/* Start the controller */
-	gfar_start(ndev);
+	gfar_start(priv);
 
 	phy_start(priv->phydev);
 
diff --git a/drivers/net/ethernet/freescale/gianfar.h b/drivers/net/ethernet/freescale/gianfar.h
index 53e34662b90e..2a59398f8cf0 100644
--- a/drivers/net/ethernet/freescale/gianfar.h
+++ b/drivers/net/ethernet/freescale/gianfar.h
@@ -1205,7 +1205,8 @@ void unlock_tx_qs(struct gfar_private *priv);
 irqreturn_t gfar_receive(int irq, void *dev_id);
 int startup_gfar(struct net_device *dev);
 void stop_gfar(struct net_device *dev);
-void gfar_halt(struct net_device *dev);
+void gfar_halt(struct gfar_private *priv);
+void gfar_start(struct gfar_private *priv);
 void gfar_phy_test(struct mii_bus *bus, struct phy_device *phydev, int enable,
 		   u32 regnum, u32 read);
 void gfar_configure_coalescing_all(struct gfar_private *priv);
diff --git a/drivers/net/ethernet/freescale/gianfar_ethtool.c b/drivers/net/ethernet/freescale/gianfar_ethtool.c
index 63d234419cc1..69fab72b8a8d 100644
--- a/drivers/net/ethernet/freescale/gianfar_ethtool.c
+++ b/drivers/net/ethernet/freescale/gianfar_ethtool.c
@@ -44,7 +44,6 @@
 
 #include "gianfar.h"
 
-extern void gfar_start(struct net_device *dev);
 extern int gfar_clean_rx_ring(struct gfar_priv_rx_q *rx_queue,
 			      int rx_work_limit);
 
@@ -504,7 +503,7 @@ static int gfar_sringparam(struct net_device *dev,
 		lock_tx_qs(priv);
 		lock_rx_qs(priv);
 
-		gfar_halt(dev);
+		gfar_halt(priv);
 
 		unlock_rx_qs(priv);
 		unlock_tx_qs(priv);
@@ -627,7 +626,7 @@ int gfar_set_features(struct net_device *dev, netdev_features_t features)
 		lock_tx_qs(priv);
 		lock_rx_qs(priv);
 
-		gfar_halt(dev);
+		gfar_halt(priv);
 
 		unlock_tx_qs(priv);
 		unlock_rx_qs(priv);
-- 
cgit v1.2.2


From 7cca336ae1b27909526987e076388a388f668fe0 Mon Sep 17 00:00:00 2001
From: Claudiu Manoil <claudiu.manoil@freescale.com>
Date: Mon, 17 Feb 2014 12:53:19 +0200
Subject: gianfar: Remove clean_rx_ring race from gfar_ethtool

gfar_clean_rx_ring() was designed to be called from napi
(rx softirq) context to do the Rx processing. Calling it
from a process context like this is a bug as it will
clearly race with the napi Rx processing.

There's also no point in initializing num_txbdfree since
startup_gfar() already does that, when bringing the device
up again (after reset). Changing num_txbdfree "on-the-fly"
like this is also subject to race conditions.  num_txbdfree
is handled by the Tx processing path and the device reset
procedure.  Also, don't assume that num_rx_queues is always
equal to num_tx_queues.

Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/freescale/gianfar_ethtool.c | 63 +++---------------------
 1 file changed, 8 insertions(+), 55 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/freescale/gianfar_ethtool.c b/drivers/net/ethernet/freescale/gianfar_ethtool.c
index 69fab72b8a8d..19557ec31f33 100644
--- a/drivers/net/ethernet/freescale/gianfar_ethtool.c
+++ b/drivers/net/ethernet/freescale/gianfar_ethtool.c
@@ -44,9 +44,6 @@
 
 #include "gianfar.h"
 
-extern int gfar_clean_rx_ring(struct gfar_priv_rx_q *rx_queue,
-			      int rx_work_limit);
-
 #define GFAR_MAX_COAL_USECS 0xffff
 #define GFAR_MAX_COAL_FRAMES 0xff
 static void gfar_fill_stats(struct net_device *dev, struct ethtool_stats *dummy,
@@ -466,15 +463,13 @@ static void gfar_gringparam(struct net_device *dev,
 }
 
 /* Change the current ring parameters, stopping the controller if
- * necessary so that we don't mess things up while we're in
- * motion.  We wait for the ring to be clean before reallocating
- * the rings.
+ * necessary so that we don't mess things up while we're in motion.
  */
 static int gfar_sringparam(struct net_device *dev,
 			   struct ethtool_ringparam *rvals)
 {
 	struct gfar_private *priv = netdev_priv(dev);
-	int err = 0, i = 0;
+	int err = 0, i;
 
 	if (rvals->rx_pending > GFAR_RX_MAX_RING_SIZE)
 		return -EINVAL;
@@ -492,38 +487,15 @@ static int gfar_sringparam(struct net_device *dev,
 		return -EINVAL;
 	}
 
-
-	if (dev->flags & IFF_UP) {
-		unsigned long flags;
-
-		/* Halt TX and RX, and process the frames which
-		 * have already been received
-		 */
-		local_irq_save(flags);
-		lock_tx_qs(priv);
-		lock_rx_qs(priv);
-
-		gfar_halt(priv);
-
-		unlock_rx_qs(priv);
-		unlock_tx_qs(priv);
-		local_irq_restore(flags);
-
-		for (i = 0; i < priv->num_rx_queues; i++)
-			gfar_clean_rx_ring(priv->rx_queue[i],
-					   priv->rx_queue[i]->rx_ring_size);
-
-		/* Now we take down the rings to rebuild them */
+	if (dev->flags & IFF_UP)
 		stop_gfar(dev);
-	}
 
-	/* Change the size */
-	for (i = 0; i < priv->num_rx_queues; i++) {
+	/* Change the sizes */
+	for (i = 0; i < priv->num_rx_queues; i++)
 		priv->rx_queue[i]->rx_ring_size = rvals->rx_pending;
+
+	for (i = 0; i < priv->num_tx_queues; i++)
 		priv->tx_queue[i]->tx_ring_size = rvals->tx_pending;
-		priv->tx_queue[i]->num_txbdfree =
-			priv->tx_queue[i]->tx_ring_size;
-	}
 
 	/* Rebuild the rings with the new size */
 	if (dev->flags & IFF_UP) {
@@ -607,10 +579,8 @@ static int gfar_spauseparam(struct net_device *dev,
 
 int gfar_set_features(struct net_device *dev, netdev_features_t features)
 {
-	struct gfar_private *priv = netdev_priv(dev);
-	unsigned long flags;
-	int err = 0, i = 0;
 	netdev_features_t changed = dev->features ^ features;
+	int err = 0;
 
 	if (changed & (NETIF_F_HW_VLAN_CTAG_TX|NETIF_F_HW_VLAN_CTAG_RX))
 		gfar_vlan_mode(dev, features);
@@ -619,23 +589,6 @@ int gfar_set_features(struct net_device *dev, netdev_features_t features)
 		return 0;
 
 	if (dev->flags & IFF_UP) {
-		/* Halt TX and RX, and process the frames which
-		 * have already been received
-		 */
-		local_irq_save(flags);
-		lock_tx_qs(priv);
-		lock_rx_qs(priv);
-
-		gfar_halt(priv);
-
-		unlock_tx_qs(priv);
-		unlock_rx_qs(priv);
-		local_irq_restore(flags);
-
-		for (i = 0; i < priv->num_rx_queues; i++)
-			gfar_clean_rx_ring(priv->rx_queue[i],
-					   priv->rx_queue[i]->rx_ring_size);
-
 		/* Now we take down the rings to rebuild them */
 		stop_gfar(dev);
 
-- 
cgit v1.2.2


From f2a2dfeb9431325b40317c9733d8a9536001d15a Mon Sep 17 00:00:00 2001
From: Alexander Gordeev <agordeev@redhat.com>
Date: Tue, 18 Feb 2014 11:07:53 +0100
Subject: bnx2: Use pci_enable_msix_range() instead of pci_enable_msix()

As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range() and pci_enable_msix_range()
interfaces.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Michael Chan <mchan@broadcom.com>
Cc: netdev@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/bnx2.c | 15 ++++-----------
 1 file changed, 4 insertions(+), 11 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c
index cda25ac45b47..ca6b36220d94 100644
--- a/drivers/net/ethernet/broadcom/bnx2.c
+++ b/drivers/net/ethernet/broadcom/bnx2.c
@@ -6206,7 +6206,7 @@ bnx2_free_irq(struct bnx2 *bp)
 static void
 bnx2_enable_msix(struct bnx2 *bp, int msix_vecs)
 {
-	int i, total_vecs, rc;
+	int i, total_vecs;
 	struct msix_entry msix_ent[BNX2_MAX_MSIX_VEC];
 	struct net_device *dev = bp->dev;
 	const int len = sizeof(bp->irq_tbl[0].name);
@@ -6229,16 +6229,9 @@ bnx2_enable_msix(struct bnx2 *bp, int msix_vecs)
 #ifdef BCM_CNIC
 	total_vecs++;
 #endif
-	rc = -ENOSPC;
-	while (total_vecs >= BNX2_MIN_MSIX_VEC) {
-		rc = pci_enable_msix(bp->pdev, msix_ent, total_vecs);
-		if (rc <= 0)
-			break;
-		if (rc > 0)
-			total_vecs = rc;
-	}
-
-	if (rc != 0)
+	total_vecs = pci_enable_msix_range(bp->pdev, msix_ent,
+					   BNX2_MIN_MSIX_VEC, total_vecs);
+	if (total_vecs < 0)
 		return;
 
 	msix_vecs = total_vecs;
-- 
cgit v1.2.2


From a5444b17478a7bf32cea1864e7923ef1da7fb215 Mon Sep 17 00:00:00 2001
From: Alexander Gordeev <agordeev@redhat.com>
Date: Tue, 18 Feb 2014 11:07:54 +0100
Subject: bnx2x: Use pci_enable_msix_range() instead of pci_enable_msix()

As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range() and pci_enable_msix_range()
interfaces.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Ariel Elior <ariele@broadcom.com>
Cc: netdev@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 46 +++++++++++--------------
 1 file changed, 20 insertions(+), 26 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
index 9ded3dbb7678..8363b9de5004 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -1638,36 +1638,16 @@ int bnx2x_enable_msix(struct bnx2x *bp)
 	DP(BNX2X_MSG_SP, "about to request enable msix with %d vectors\n",
 	   msix_vec);
 
-	rc = pci_enable_msix(bp->pdev, &bp->msix_table[0], msix_vec);
-
+	rc = pci_enable_msix_range(bp->pdev, &bp->msix_table[0],
+				   BNX2X_MIN_MSIX_VEC_CNT(bp), msix_vec);
 	/*
 	 * reconfigure number of tx/rx queues according to available
 	 * MSI-X vectors
 	 */
-	if (rc >= BNX2X_MIN_MSIX_VEC_CNT(bp)) {
-		/* how less vectors we will have? */
-		int diff = msix_vec - rc;
-
-		BNX2X_DEV_INFO("Trying to use less MSI-X vectors: %d\n", rc);
-
-		rc = pci_enable_msix(bp->pdev, &bp->msix_table[0], rc);
-
-		if (rc) {
-			BNX2X_DEV_INFO("MSI-X is not attainable rc %d\n", rc);
-			goto no_msix;
-		}
-		/*
-		 * decrease number of queues by number of unallocated entries
-		 */
-		bp->num_ethernet_queues -= diff;
-		bp->num_queues = bp->num_ethernet_queues + bp->num_cnic_queues;
-
-		BNX2X_DEV_INFO("New queue configuration set: %d\n",
-			       bp->num_queues);
-	} else if (rc > 0) {
+	if (rc == -ENOSPC) {
 		/* Get by with single vector */
-		rc = pci_enable_msix(bp->pdev, &bp->msix_table[0], 1);
-		if (rc) {
+		rc = pci_enable_msix_range(bp->pdev, &bp->msix_table[0], 1, 1);
+		if (rc < 0) {
 			BNX2X_DEV_INFO("Single MSI-X is not attainable rc %d\n",
 				       rc);
 			goto no_msix;
@@ -1680,8 +1660,22 @@ int bnx2x_enable_msix(struct bnx2x *bp)
 		bp->num_ethernet_queues = 1;
 		bp->num_queues = bp->num_ethernet_queues + bp->num_cnic_queues;
 	} else if (rc < 0) {
-		BNX2X_DEV_INFO("MSI-X is not attainable  rc %d\n", rc);
+		BNX2X_DEV_INFO("MSI-X is not attainable rc %d\n", rc);
 		goto no_msix;
+	} else if (rc < msix_vec) {
+		/* how less vectors we will have? */
+		int diff = msix_vec - rc;
+
+		BNX2X_DEV_INFO("Trying to use less MSI-X vectors: %d\n", rc);
+
+		/*
+		 * decrease number of queues by number of unallocated entries
+		 */
+		bp->num_ethernet_queues -= diff;
+		bp->num_queues = bp->num_ethernet_queues + bp->num_cnic_queues;
+
+		BNX2X_DEV_INFO("New queue configuration set: %d\n",
+			       bp->num_queues);
 	}
 
 	bp->flags |= USING_MSIX_FLAG;
-- 
cgit v1.2.2


From 6f1f411a2398bfdb55b4de9e60e830d5a85702d6 Mon Sep 17 00:00:00 2001
From: Alexander Gordeev <agordeev@redhat.com>
Date: Tue, 18 Feb 2014 11:07:55 +0100
Subject: tg3: Use pci_enable_msix_range() instead of pci_enable_msix()

As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range() and pci_enable_msix_range()
interfaces.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Nithin Nayak Sujir <nsujir@broadcom.com>
Cc: Michael Chan <mchan@broadcom.com>
Cc: netdev@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/tg3.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index 3167ed6593b0..6e5e7c0ffbd7 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -11362,12 +11362,10 @@ static bool tg3_enable_msix(struct tg3 *tp)
 		msix_ent[i].vector = 0;
 	}
 
-	rc = pci_enable_msix(tp->pdev, msix_ent, tp->irq_cnt);
+	rc = pci_enable_msix_range(tp->pdev, msix_ent, 1, tp->irq_cnt);
 	if (rc < 0) {
 		return false;
-	} else if (rc != 0) {
-		if (pci_enable_msix(tp->pdev, msix_ent, rc))
-			return false;
+	} else if (rc < tp->irq_cnt) {
 		netdev_notice(tp->dev, "Requested %d MSI-X vectors, received %d\n",
 			      tp->irq_cnt, rc);
 		tp->irq_cnt = rc;
-- 
cgit v1.2.2


From 43c20200d13146b2e51a0bd069a566e582c75c9d Mon Sep 17 00:00:00 2001
From: Alexander Gordeev <agordeev@redhat.com>
Date: Tue, 18 Feb 2014 11:07:56 +0100
Subject: bna: Use pci_enable_msix_range() instead of pci_enable_msix()

As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range() and pci_enable_msix_range()
interfaces.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Rasesh Mody <rmody@brocade.com>
Cc: netdev@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/brocade/bna/bnad.c | 23 +++++++++--------------
 1 file changed, 9 insertions(+), 14 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/brocade/bna/bnad.c b/drivers/net/ethernet/brocade/bna/bnad.c
index cf64f3d0b60d..bf436d0a1094 100644
--- a/drivers/net/ethernet/brocade/bna/bnad.c
+++ b/drivers/net/ethernet/brocade/bna/bnad.c
@@ -2666,9 +2666,11 @@ bnad_enable_msix(struct bnad *bnad)
 	for (i = 0; i < bnad->msix_num; i++)
 		bnad->msix_table[i].entry = i;
 
-	ret = pci_enable_msix(bnad->pcidev, bnad->msix_table, bnad->msix_num);
-	if (ret > 0) {
-		/* Not enough MSI-X vectors. */
+	ret = pci_enable_msix_range(bnad->pcidev, bnad->msix_table,
+				    1, bnad->msix_num);
+	if (ret < 0) {
+		goto intx_mode;
+	} else if (ret < bnad->msix_num) {
 		pr_warn("BNA: %d MSI-X vectors allocated < %d requested\n",
 			ret, bnad->msix_num);
 
@@ -2681,18 +2683,11 @@ bnad_enable_msix(struct bnad *bnad)
 		bnad->msix_num = BNAD_NUM_TXQ + BNAD_NUM_RXP +
 			 BNAD_MAILBOX_MSIX_VECTORS;
 
-		if (bnad->msix_num > ret)
-			goto intx_mode;
-
-		/* Try once more with adjusted numbers */
-		/* If this fails, fall back to INTx */
-		ret = pci_enable_msix(bnad->pcidev, bnad->msix_table,
-				      bnad->msix_num);
-		if (ret)
+		if (bnad->msix_num > ret) {
+			pci_disable_msix(bnad->pcidev);
 			goto intx_mode;
-
-	} else if (ret < 0)
-		goto intx_mode;
+		}
+	}
 
 	pci_intx(bnad->pcidev, 0);
 
-- 
cgit v1.2.2


From c0b2551681e8fac72c189c76e7ec8b19002048b3 Mon Sep 17 00:00:00 2001
From: Alexander Gordeev <agordeev@redhat.com>
Date: Tue, 18 Feb 2014 11:07:57 +0100
Subject: cxgb3: Remove superfluous call to pci_disable_msix()

There is no need to call pci_disable_msix() in case
the previous call to pci_enable_msix() failed

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Santosh Raspatur <santosh@chelsio.com>
Cc: netdev@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c | 3 ---
 1 file changed, 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c
index 45d77334d7d9..b72d2ed9dad4 100644
--- a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c
@@ -3097,9 +3097,6 @@ static int cxgb_enable_msix(struct adapter *adap)
 	while ((err = pci_enable_msix(adap->pdev, entries, vectors)) > 0)
 		vectors = err;
 
-	if (err < 0)
-		pci_disable_msix(adap->pdev);
-
 	if (!err && vectors < (adap->params.nports + 1)) {
 		pci_disable_msix(adap->pdev);
 		err = -1;
-- 
cgit v1.2.2


From fc1d0bf1f27c563725234dc337bf8fc806eee7b3 Mon Sep 17 00:00:00 2001
From: Alexander Gordeev <agordeev@redhat.com>
Date: Tue, 18 Feb 2014 11:07:58 +0100
Subject: cxgb3: Use pci_enable_msix_range() instead of pci_enable_msix()

As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range() and pci_enable_msix_range()
interfaces.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Santosh Raspatur <santosh@chelsio.com>
Cc: netdev@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c | 23 +++++++++--------------
 1 file changed, 9 insertions(+), 14 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c
index b72d2ed9dad4..07bbb711b7e5 100644
--- a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c
@@ -3088,27 +3088,22 @@ static int cxgb_enable_msix(struct adapter *adap)
 {
 	struct msix_entry entries[SGE_QSETS + 1];
 	int vectors;
-	int i, err;
+	int i;
 
 	vectors = ARRAY_SIZE(entries);
 	for (i = 0; i < vectors; ++i)
 		entries[i].entry = i;
 
-	while ((err = pci_enable_msix(adap->pdev, entries, vectors)) > 0)
-		vectors = err;
-
-	if (!err && vectors < (adap->params.nports + 1)) {
-		pci_disable_msix(adap->pdev);
-		err = -1;
-	}
+	vectors = pci_enable_msix_range(adap->pdev, entries,
+					adap->params.nports + 1, vectors);
+	if (vectors < 0)
+		return vectors;
 
-	if (!err) {
-		for (i = 0; i < vectors; ++i)
-			adap->msix_info[i].vec = entries[i].vector;
-		adap->msix_nvectors = vectors;
-	}
+	for (i = 0; i < vectors; ++i)
+		adap->msix_info[i].vec = entries[i].vector;
+	adap->msix_nvectors = vectors;
 
-	return err;
+	return 0;
 }
 
 static void print_port_info(struct adapter *adap, const struct adapter_info *ai)
-- 
cgit v1.2.2


From c32ad224e5abda89cf47a80efce5d4e944674d8d Mon Sep 17 00:00:00 2001
From: Alexander Gordeev <agordeev@redhat.com>
Date: Tue, 18 Feb 2014 11:07:59 +0100
Subject: cxgb4: Use pci_enable_msix_range() instead of pci_enable_msix()

As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range() and pci_enable_msix_range()
interfaces.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Dimitris Michailidis <dm@chelsio.com>
Cc: netdev@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 50 ++++++++++++-------------
 1 file changed, 24 insertions(+), 26 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index 43ab35fea48d..bd0321d8b612 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -5737,7 +5737,7 @@ static void reduce_ethqs(struct adapter *adap, int n)
 static int enable_msix(struct adapter *adap)
 {
 	int ofld_need = 0;
-	int i, err, want, need;
+	int i, want, need;
 	struct sge *s = &adap->sge;
 	unsigned int nchan = adap->params.nports;
 	struct msix_entry entries[MAX_INGQ + 1];
@@ -5753,32 +5753,30 @@ static int enable_msix(struct adapter *adap)
 	}
 	need = adap->params.nports + EXTRA_VECS + ofld_need;
 
-	while ((err = pci_enable_msix(adap->pdev, entries, want)) >= need)
-		want = err;
+	want = pci_enable_msix_range(adap->pdev, entries, need, want);
+	if (want < 0)
+		return want;
 
-	if (!err) {
-		/*
-		 * Distribute available vectors to the various queue groups.
-		 * Every group gets its minimum requirement and NIC gets top
-		 * priority for leftovers.
-		 */
-		i = want - EXTRA_VECS - ofld_need;
-		if (i < s->max_ethqsets) {
-			s->max_ethqsets = i;
-			if (i < s->ethqsets)
-				reduce_ethqs(adap, i);
-		}
-		if (is_offload(adap)) {
-			i = want - EXTRA_VECS - s->max_ethqsets;
-			i -= ofld_need - nchan;
-			s->ofldqsets = (i / nchan) * nchan;  /* round down */
-		}
-		for (i = 0; i < want; ++i)
-			adap->msix_info[i].vec = entries[i].vector;
-	} else if (err > 0)
-		dev_info(adap->pdev_dev,
-			 "only %d MSI-X vectors left, not using MSI-X\n", err);
-	return err;
+	/*
+	 * Distribute available vectors to the various queue groups.
+	 * Every group gets its minimum requirement and NIC gets top
+	 * priority for leftovers.
+	 */
+	i = want - EXTRA_VECS - ofld_need;
+	if (i < s->max_ethqsets) {
+		s->max_ethqsets = i;
+		if (i < s->ethqsets)
+			reduce_ethqs(adap, i);
+	}
+	if (is_offload(adap)) {
+		i = want - EXTRA_VECS - s->max_ethqsets;
+		i -= ofld_need - nchan;
+		s->ofldqsets = (i / nchan) * nchan;  /* round down */
+	}
+	for (i = 0; i < want; ++i)
+		adap->msix_info[i].vec = entries[i].vector;
+
+	return 0;
 }
 
 #undef EXTRA_VECS
-- 
cgit v1.2.2


From f6f273bfe1e9d678de3598feb7906138cfe68b71 Mon Sep 17 00:00:00 2001
From: Alexander Gordeev <agordeev@redhat.com>
Date: Tue, 18 Feb 2014 11:08:00 +0100
Subject: cxgb4vf: Remove superfluous call to pci_disable_msix()

There is no need to call pci_disable_msix() in case
the previous call to pci_enable_msix() failed

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Casey Leedom <leedom@chelsio.com>
Cc: netdev@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
index 0899c0983594..509fed946a2c 100644
--- a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
@@ -2475,7 +2475,6 @@ static int enable_msix(struct adapter *adapter)
 		for (i = 0; i < want; ++i)
 			adapter->msix_info[i].vec = entries[i].vector;
 	} else if (err > 0) {
-		pci_disable_msix(adapter->pdev);
 		dev_info(adapter->pdev_dev, "only %d MSI-X vectors left,"
 			 " not using MSI-X\n", err);
 	}
-- 
cgit v1.2.2


From bd66368940ae1c8c7491f55650b813c9d790f92c Mon Sep 17 00:00:00 2001
From: Alexander Gordeev <agordeev@redhat.com>
Date: Tue, 18 Feb 2014 11:08:01 +0100
Subject: cxgb4vf: Use pci_enable_msix_range() instead of pci_enable_msix()

As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range() and pci_enable_msix_range()
interfaces.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Casey Leedom <leedom@chelsio.com>
Cc: netdev@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 .../net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c    | 34 ++++++++++------------
 1 file changed, 16 insertions(+), 18 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
index 509fed946a2c..1d0fe9b60312 100644
--- a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
@@ -2444,7 +2444,7 @@ static void reduce_ethqs(struct adapter *adapter, int n)
  */
 static int enable_msix(struct adapter *adapter)
 {
-	int i, err, want, need;
+	int i, want, need, nqsets;
 	struct msix_entry entries[MSIX_ENTRIES];
 	struct sge *s = &adapter->sge;
 
@@ -2460,25 +2460,23 @@ static int enable_msix(struct adapter *adapter)
 	 */
 	want = s->max_ethqsets + MSIX_EXTRAS;
 	need = adapter->params.nports + MSIX_EXTRAS;
-	while ((err = pci_enable_msix(adapter->pdev, entries, want)) >= need)
-		want = err;
 
-	if (err == 0) {
-		int nqsets = want - MSIX_EXTRAS;
-		if (nqsets < s->max_ethqsets) {
-			dev_warn(adapter->pdev_dev, "only enough MSI-X vectors"
-				 " for %d Queue Sets\n", nqsets);
-			s->max_ethqsets = nqsets;
-			if (nqsets < s->ethqsets)
-				reduce_ethqs(adapter, nqsets);
-		}
-		for (i = 0; i < want; ++i)
-			adapter->msix_info[i].vec = entries[i].vector;
-	} else if (err > 0) {
-		dev_info(adapter->pdev_dev, "only %d MSI-X vectors left,"
-			 " not using MSI-X\n", err);
+	want = pci_enable_msix_range(adapter->pdev, entries, need, want);
+	if (want < 0)
+		return want;
+
+	nqsets = want - MSIX_EXTRAS;
+	if (nqsets < s->max_ethqsets) {
+		dev_warn(adapter->pdev_dev, "only enough MSI-X vectors"
+			 " for %d Queue Sets\n", nqsets);
+		s->max_ethqsets = nqsets;
+		if (nqsets < s->ethqsets)
+			reduce_ethqs(adapter, nqsets);
 	}
-	return err;
+	for (i = 0; i < want; ++i)
+		adapter->msix_info[i].vec = entries[i].vector;
+
+	return 0;
 }
 
 static const struct net_device_ops cxgb4vf_netdev_ops	= {
-- 
cgit v1.2.2


From abbb6a373ad9bf3a169135cb09494af35f02dbd9 Mon Sep 17 00:00:00 2001
From: Alexander Gordeev <agordeev@redhat.com>
Date: Tue, 18 Feb 2014 11:08:02 +0100
Subject: enic: Use pci_enable_msix_range() instead of pci_enable_msix()

As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range() and pci_enable_msix_range()
interfaces.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Christian Benvenuti <benve@cisco.com>
Cc: Sujith Sankar <ssujith@cisco.com>
Cc: Govindarajulu Varadarajan <govindarajulu90@gmail.com>
Cc: Neel Patel <neepatel@cisco.com>
Cc: netdev@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Acked-by: Govindarajulu Varadarajan <govindarajulu90@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/cisco/enic/enic_main.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/cisco/enic/enic_main.c b/drivers/net/ethernet/cisco/enic/enic_main.c
index b740bfce72ef..dcd58f23834a 100644
--- a/drivers/net/ethernet/cisco/enic/enic_main.c
+++ b/drivers/net/ethernet/cisco/enic/enic_main.c
@@ -1796,7 +1796,8 @@ static int enic_set_intr_mode(struct enic *enic)
 	    enic->cq_count >= n + m &&
 	    enic->intr_count >= n + m + 2) {
 
-		if (!pci_enable_msix(enic->pdev, enic->msix_entry, n + m + 2)) {
+		if (pci_enable_msix_range(enic->pdev, enic->msix_entry,
+					  n + m + 2, n + m + 2) > 0) {
 
 			enic->rq_count = n;
 			enic->wq_count = m;
@@ -1815,7 +1816,8 @@ static int enic_set_intr_mode(struct enic *enic)
 	    enic->wq_count >= m &&
 	    enic->cq_count >= 1 + m &&
 	    enic->intr_count >= 1 + m + 2) {
-		if (!pci_enable_msix(enic->pdev, enic->msix_entry, 1 + m + 2)) {
+		if (pci_enable_msix_range(enic->pdev, enic->msix_entry,
+					  1 + m + 2, 1 + m + 2) > 0) {
 
 			enic->rq_count = 1;
 			enic->wq_count = m;
-- 
cgit v1.2.2


From 7dc4c064943314e1228c8aa0ff7644c7c87b0c8d Mon Sep 17 00:00:00 2001
From: Alexander Gordeev <agordeev@redhat.com>
Date: Tue, 18 Feb 2014 11:11:40 +0100
Subject: benet: Use pci_enable_msix_range() instead of pci_enable_msix()

As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range() and pci_enable_msix_range()
interfaces.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Sathya Perla <sathya.perla@emulex.com>
Cc: Subbu Seetharaman <subbu.seetharaman@emulex.com>
Cc: Ajit Khaparde <ajit.khaparde@emulex.com>
Cc: netdev@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Acked-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/emulex/benet/be_main.c | 31 ++++++++++++-----------------
 1 file changed, 13 insertions(+), 18 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index a8cf03ed2de6..4f87f5c0b03c 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -2507,7 +2507,7 @@ static void be_msix_disable(struct be_adapter *adapter)
 
 static int be_msix_enable(struct be_adapter *adapter)
 {
-	int i, status, num_vec;
+	int i, num_vec;
 	struct device *dev = &adapter->pdev->dev;
 
 	/* If RoCE is supported, program the max number of NIC vectors that
@@ -2523,24 +2523,11 @@ static int be_msix_enable(struct be_adapter *adapter)
 	for (i = 0; i < num_vec; i++)
 		adapter->msix_entries[i].entry = i;
 
-	status = pci_enable_msix(adapter->pdev, adapter->msix_entries, num_vec);
-	if (status == 0) {
-		goto done;
-	} else if (status >= MIN_MSIX_VECTORS) {
-		num_vec = status;
-		status = pci_enable_msix(adapter->pdev, adapter->msix_entries,
-					 num_vec);
-		if (!status)
-			goto done;
-	}
+	num_vec = pci_enable_msix_range(adapter->pdev, adapter->msix_entries,
+					MIN_MSIX_VECTORS, num_vec);
+	if (num_vec < 0)
+		goto fail;
 
-	dev_warn(dev, "MSIx enable failed\n");
-
-	/* INTx is not supported in VFs, so fail probe if enable_msix fails */
-	if (!be_physfn(adapter))
-		return status;
-	return 0;
-done:
 	if (be_roce_supported(adapter) && num_vec > MIN_MSIX_VECTORS) {
 		adapter->num_msix_roce_vec = num_vec / 2;
 		dev_info(dev, "enabled %d MSI-x vector(s) for RoCE\n",
@@ -2552,6 +2539,14 @@ done:
 	dev_info(dev, "enabled %d MSI-x vector(s) for NIC\n",
 		 adapter->num_msix_vec);
 	return 0;
+
+fail:
+	dev_warn(dev, "MSIx enable failed\n");
+
+	/* INTx is not supported in VFs, so fail probe if enable_msix fails */
+	if (!be_physfn(adapter))
+		return num_vec;
+	return 0;
 }
 
 static inline int be_msix_vec_get(struct be_adapter *adapter,
-- 
cgit v1.2.2


From 0cc7c959fa8920e0b5922d04663e6bbb1e041252 Mon Sep 17 00:00:00 2001
From: Alexander Gordeev <agordeev@redhat.com>
Date: Tue, 18 Feb 2014 11:11:41 +0100
Subject: e1000e: Use pci_enable_msix_range() instead of pci_enable_msix()

As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range() and pci_enable_msix_range()
interfaces.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Bruce Allan <bruce.w.allan@intel.com>
Cc: e1000-devel@lists.sourceforge.net
Cc: netdev@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/e1000e/netdev.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 6d91933c4cdd..e6f8961d49eb 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -2038,13 +2038,16 @@ void e1000e_set_interrupt_capability(struct e1000_adapter *adapter)
 							       msix_entry),
 							GFP_KERNEL);
 			if (adapter->msix_entries) {
+				struct e1000_adapter *a = adapter;
+
 				for (i = 0; i < adapter->num_vectors; i++)
 					adapter->msix_entries[i].entry = i;
 
-				err = pci_enable_msix(adapter->pdev,
-						      adapter->msix_entries,
-						      adapter->num_vectors);
-				if (err == 0)
+				err = pci_enable_msix_range(a->pdev,
+							    a->msix_entries,
+							    a->num_vectors,
+							    a->num_vectors);
+				if (err > 0)
 					return;
 			}
 			/* MSI-X failed, so fall through and try MSI */
-- 
cgit v1.2.2


From 7b37f3765c9befa0ff7cfba667f430880c87ee5a Mon Sep 17 00:00:00 2001
From: Alexander Gordeev <agordeev@redhat.com>
Date: Tue, 18 Feb 2014 11:11:42 +0100
Subject: i40e: Use pci_enable_msix_range() instead of pci_enable_msix()

As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range() and pci_enable_msix_range()
interfaces.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: e1000-devel@lists.sourceforge.net
Cc: netdev@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 33 ++++++-----------------------
 1 file changed, 6 insertions(+), 27 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 628e917f5338..3116861198f0 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -5856,37 +5856,16 @@ err_out:
  **/
 static int i40e_reserve_msix_vectors(struct i40e_pf *pf, int vectors)
 {
-	int err = 0;
-
-	pf->num_msix_entries = 0;
-	while (vectors >= I40E_MIN_MSIX) {
-		err = pci_enable_msix(pf->pdev, pf->msix_entries, vectors);
-		if (err == 0) {
-			/* good to go */
-			pf->num_msix_entries = vectors;
-			break;
-		} else if (err < 0) {
-			/* total failure */
-			dev_info(&pf->pdev->dev,
-				 "MSI-X vector reservation failed: %d\n", err);
-			vectors = 0;
-			break;
-		} else {
-			/* err > 0 is the hint for retry */
-			dev_info(&pf->pdev->dev,
-				 "MSI-X vectors wanted %d, retrying with %d\n",
-				 vectors, err);
-			vectors = err;
-		}
-	}
-
-	if (vectors > 0 && vectors < I40E_MIN_MSIX) {
+	vectors = pci_enable_msix_range(pf->pdev, pf->msix_entries,
+					I40E_MIN_MSIX, vectors);
+	if (vectors < 0) {
 		dev_info(&pf->pdev->dev,
-			 "Couldn't get enough vectors, only %d available\n",
-			 vectors);
+			 "MSI-X vector reservation failed: %d\n", vectors);
 		vectors = 0;
 	}
 
+	pf->num_msix_entries = vectors;
+
 	return vectors;
 }
 
-- 
cgit v1.2.2


From 479d02dfadfbe850ced61c5c83ca16b8b9d4ac5f Mon Sep 17 00:00:00 2001
From: Alexander Gordeev <agordeev@redhat.com>
Date: Tue, 18 Feb 2014 11:11:43 +0100
Subject: igb: Use pci_enable_msix_range() instead of pci_enable_msix()

As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range() and pci_enable_msix_range()
interfaces.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: e1000-devel@lists.sourceforge.net
Cc: netdev@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/igb/igb_main.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 46d31a49f5ea..84dfa3f0e3b8 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -1111,10 +1111,11 @@ static void igb_set_interrupt_capability(struct igb_adapter *adapter, bool msix)
 	for (i = 0; i < numvecs; i++)
 		adapter->msix_entries[i].entry = i;
 
-	err = pci_enable_msix(adapter->pdev,
-			      adapter->msix_entries,
-			      numvecs);
-	if (err == 0)
+	err = pci_enable_msix_range(adapter->pdev,
+				    adapter->msix_entries,
+				    numvecs,
+				    numvecs);
+	if (err > 0)
 		return;
 
 	igb_reset_interrupt_capability(adapter);
-- 
cgit v1.2.2


From 4601e7591f2609860b432206cd65845615c8b45a Mon Sep 17 00:00:00 2001
From: Alexander Gordeev <agordeev@redhat.com>
Date: Tue, 18 Feb 2014 11:11:44 +0100
Subject: igbvf: Use pci_enable_msix_range() instead of pci_enable_msix()

As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range() and pci_enable_msix_range()
interfaces.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Bruce Allan <bruce.w.allan@intel.com>
Cc: e1000-devel@lists.sourceforge.net
Cc: netdev@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/igbvf/netdev.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/igbvf/netdev.c b/drivers/net/ethernet/intel/igbvf/netdev.c
index 675435fc2e53..e2c6d8059b74 100644
--- a/drivers/net/ethernet/intel/igbvf/netdev.c
+++ b/drivers/net/ethernet/intel/igbvf/netdev.c
@@ -1043,11 +1043,11 @@ static void igbvf_set_interrupt_capability(struct igbvf_adapter *adapter)
 		for (i = 0; i < 3; i++)
 			adapter->msix_entries[i].entry = i;
 
-		err = pci_enable_msix(adapter->pdev,
-		                      adapter->msix_entries, 3);
+		err = pci_enable_msix_range(adapter->pdev,
+		                            adapter->msix_entries, 3, 3);
 	}
 
-	if (err) {
+	if (err < 0) {
 		/* MSI-X failed */
 		dev_err(&adapter->pdev->dev,
 		        "Failed to initialize MSI-X interrupts.\n");
-- 
cgit v1.2.2


From b45e620c52636d8480a6f90ba6cc7d48e17b38dd Mon Sep 17 00:00:00 2001
From: Alexander Gordeev <agordeev@redhat.com>
Date: Tue, 18 Feb 2014 11:11:45 +0100
Subject: ixgbe: Use pci_enable_msix_range() instead of pci_enable_msix()

As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range() and pci_enable_msix_range()
interfaces.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Bruce Allan <bruce.w.allan@intel.com>
Cc: e1000-devel@lists.sourceforge.net
Cc: netdev@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c | 16 ++++------------
 1 file changed, 4 insertions(+), 12 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c
index 32e3eaaa160a..0834e1ea44bc 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c
@@ -698,7 +698,7 @@ static void ixgbe_set_num_queues(struct ixgbe_adapter *adapter)
 static void ixgbe_acquire_msix_vectors(struct ixgbe_adapter *adapter,
 				       int vectors)
 {
-	int err, vector_threshold;
+	int vector_threshold;
 
 	/* We'll want at least 2 (vector_threshold):
 	 * 1) TxQ[0] + RxQ[0] handler
@@ -712,18 +712,10 @@ static void ixgbe_acquire_msix_vectors(struct ixgbe_adapter *adapter,
 	 * Right now, we simply care about how many we'll get; we'll
 	 * set them up later while requesting irq's.
 	 */
-	while (vectors >= vector_threshold) {
-		err = pci_enable_msix(adapter->pdev, adapter->msix_entries,
-				      vectors);
-		if (!err) /* Success in acquiring all requested vectors. */
-			break;
-		else if (err < 0)
-			vectors = 0; /* Nasty failure, quit now */
-		else /* err == number of vectors we should try again with */
-			vectors = err;
-	}
+	vectors = pci_enable_msix_range(adapter->pdev, adapter->msix_entries,
+					vector_threshold, vectors);
 
-	if (vectors < vector_threshold) {
+	if (vectors < 0) {
 		/* Can't allocate enough MSI-X interrupts?  Oh well.
 		 * This just means we'll go with either a single MSI
 		 * vector or fall back to legacy interrupts.
-- 
cgit v1.2.2


From 5c1e35880233b0385cc60ae8e3f2a40c69de24e0 Mon Sep 17 00:00:00 2001
From: Alexander Gordeev <agordeev@redhat.com>
Date: Tue, 18 Feb 2014 11:11:46 +0100
Subject: ixgbevf: Use pci_enable_msix_range() instead of pci_enable_msix()

As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range() and pci_enable_msix_range()
interfaces.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Bruce Allan <bruce.w.allan@intel.com>
Cc: e1000-devel@lists.sourceforge.net
Cc: netdev@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 32 ++++++++---------------
 1 file changed, 11 insertions(+), 21 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
index 9df28985eba7..a6af7b7c59b1 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
@@ -1817,7 +1817,6 @@ void ixgbevf_reset(struct ixgbevf_adapter *adapter)
 static int ixgbevf_acquire_msix_vectors(struct ixgbevf_adapter *adapter,
 					int vectors)
 {
-	int err = 0;
 	int vector_threshold;
 
 	/* We'll want at least 2 (vector_threshold):
@@ -1831,33 +1830,24 @@ static int ixgbevf_acquire_msix_vectors(struct ixgbevf_adapter *adapter,
 	 * Right now, we simply care about how many we'll get; we'll
 	 * set them up later while requesting irq's.
 	 */
-	while (vectors >= vector_threshold) {
-		err = pci_enable_msix(adapter->pdev, adapter->msix_entries,
-				      vectors);
-		if (!err || err < 0) /* Success or a nasty failure. */
-			break;
-		else /* err == number of vectors we should try again with */
-			vectors = err;
-	}
+	vectors = pci_enable_msix_range(adapter->pdev, adapter->msix_entries,
+					vector_threshold, vectors);
 
-	if (vectors < vector_threshold)
-		err = -ENOMEM;
-
-	if (err) {
+	if (vectors < 0) {
 		dev_err(&adapter->pdev->dev,
 			"Unable to allocate MSI-X interrupts\n");
 		kfree(adapter->msix_entries);
 		adapter->msix_entries = NULL;
-	} else {
-		/*
-		 * Adjust for only the vectors we'll use, which is minimum
-		 * of max_msix_q_vectors + NON_Q_VECTORS, or the number of
-		 * vectors we were allocated.
-		 */
-		adapter->num_msix_vectors = vectors;
+		return vectors;
 	}
 
-	return err;
+	/* Adjust for only the vectors we'll use, which is minimum
+	 * of max_msix_q_vectors + NON_Q_VECTORS, or the number of
+	 * vectors we were allocated.
+	 */
+	adapter->num_msix_vectors = vectors;
+
+	return 0;
 }
 
 /**
-- 
cgit v1.2.2


From 66e2f9c1de5550ab8e86ec6d33bf3f4215d389b8 Mon Sep 17 00:00:00 2001
From: Alexander Gordeev <agordeev@redhat.com>
Date: Tue, 18 Feb 2014 11:11:47 +0100
Subject: mlx4: Use pci_enable_msix_range() instead of pci_enable_msix()

As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range() and pci_enable_msix_range()
interfaces.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Amir Vadai <amirv@mellanox.com>
Cc: netdev@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Acked-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/mellanox/mlx4/main.c | 21 +++++----------------
 1 file changed, 5 insertions(+), 16 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c
index d711158b0d4b..218b759c506e 100644
--- a/drivers/net/ethernet/mellanox/mlx4/main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/main.c
@@ -1976,7 +1976,6 @@ static void mlx4_enable_msi_x(struct mlx4_dev *dev)
 	int nreq = min_t(int, dev->caps.num_ports *
 			 min_t(int, netif_get_num_default_rss_queues() + 1,
 			       MAX_MSIX_P_PORT) + MSIX_LEGACY_SZ, MAX_MSIX);
-	int err;
 	int i;
 
 	if (msi_x) {
@@ -1990,23 +1989,13 @@ static void mlx4_enable_msi_x(struct mlx4_dev *dev)
 		for (i = 0; i < nreq; ++i)
 			entries[i].entry = i;
 
-	retry:
-		err = pci_enable_msix(dev->pdev, entries, nreq);
-		if (err) {
-			/* Try again if at least 2 vectors are available */
-			if (err > 1) {
-				mlx4_info(dev, "Requested %d vectors, "
-					  "but only %d MSI-X vectors available, "
-					  "trying again\n", nreq, err);
-				nreq = err;
-				goto retry;
-			}
+		nreq = pci_enable_msix_range(dev->pdev, entries, 2, nreq);
+
+		if (nreq < 0) {
 			kfree(entries);
 			goto no_msi;
-		}
-
-		if (nreq <
-		    MSIX_LEGACY_SZ + dev->caps.num_ports * MIN_MSIX_P_PORT) {
+		} else if (nreq < MSIX_LEGACY_SZ +
+				  dev->caps.num_ports * MIN_MSIX_P_PORT) {
 			/*Working in legacy mode , all EQ's shared*/
 			dev->caps.comp_pool           = 0;
 			dev->caps.num_comp_vectors = nreq - 1;
-- 
cgit v1.2.2


From f3c9407bc201f2e3f0e6845e9921454945568ed1 Mon Sep 17 00:00:00 2001
From: Alexander Gordeev <agordeev@redhat.com>
Date: Tue, 18 Feb 2014 11:11:48 +0100
Subject: mlx5: Use pci_enable_msix_range() instead of pci_enable_msix()

As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range() and pci_enable_msix_range()
interfaces.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Eli Cohen <eli@mellanox.com>
Cc: linux-rdma@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/mellanox/mlx5/core/main.c | 16 +++++-----------
 1 file changed, 5 insertions(+), 11 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c
index a064f06e0cb8..81df046a6d69 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c
@@ -116,7 +116,6 @@ static int mlx5_enable_msix(struct mlx5_core_dev *dev)
 	struct mlx5_eq_table *table = &dev->priv.eq_table;
 	int num_eqs = 1 << dev->caps.log_max_eq;
 	int nvec;
-	int err;
 	int i;
 
 	nvec = dev->caps.num_ports * num_online_cpus() + MLX5_EQ_VEC_COMP_BASE;
@@ -131,17 +130,12 @@ static int mlx5_enable_msix(struct mlx5_core_dev *dev)
 	for (i = 0; i < nvec; i++)
 		table->msix_arr[i].entry = i;
 
-retry:
-	table->num_comp_vectors = nvec - MLX5_EQ_VEC_COMP_BASE;
-	err = pci_enable_msix(dev->pdev, table->msix_arr, nvec);
-	if (err <= 0) {
-		return err;
-	} else if (err > 2) {
-		nvec = err;
-		goto retry;
-	}
+	nvec = pci_enable_msix_range(dev->pdev, table->msix_arr,
+				     MLX5_EQ_VEC_COMP_BASE, nvec);
+	if (nvec < 0)
+		return nvec;
 
-	mlx5_core_dbg(dev, "received %d MSI vectors out of %d requested\n", err, nvec);
+	table->num_comp_vectors = nvec - MLX5_EQ_VEC_COMP_BASE;
 
 	return 0;
 }
-- 
cgit v1.2.2


From 0729cc0c5e7f5a11a10be37d550f8cff8ffc0cbd Mon Sep 17 00:00:00 2001
From: Alexander Gordeev <agordeev@redhat.com>
Date: Tue, 18 Feb 2014 11:11:49 +0100
Subject: myri10ge: Use pci_enable_msix_range() instead of pci_enable_msix()

As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range() and pci_enable_msix_range()
interfaces.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Hyong-Youb Kim <hykim@myri.com>
Cc: netdev@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/myricom/myri10ge/myri10ge.c | 40 ++++++++++++------------
 1 file changed, 20 insertions(+), 20 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/myricom/myri10ge/myri10ge.c b/drivers/net/ethernet/myricom/myri10ge/myri10ge.c
index 68026f7e8ba3..130f6b204efa 100644
--- a/drivers/net/ethernet/myricom/myri10ge/myri10ge.c
+++ b/drivers/net/ethernet/myricom/myri10ge/myri10ge.c
@@ -2329,16 +2329,14 @@ static int myri10ge_request_irq(struct myri10ge_priv *mgp)
 	status = 0;
 	if (myri10ge_msi) {
 		if (mgp->num_slices > 1) {
-			status =
-			    pci_enable_msix(pdev, mgp->msix_vectors,
-					    mgp->num_slices);
-			if (status == 0) {
-				mgp->msix_enabled = 1;
-			} else {
+			status = pci_enable_msix_range(pdev, mgp->msix_vectors,
+					mgp->num_slices, mgp->num_slices);
+			if (status < 0) {
 				dev_err(&pdev->dev,
 					"Error %d setting up MSI-X\n", status);
 				return status;
 			}
+			mgp->msix_enabled = 1;
 		}
 		if (mgp->msix_enabled == 0) {
 			status = pci_enable_msi(pdev);
@@ -3895,32 +3893,34 @@ static void myri10ge_probe_slices(struct myri10ge_priv *mgp)
 	mgp->msix_vectors = kcalloc(mgp->num_slices, sizeof(*mgp->msix_vectors),
 				    GFP_KERNEL);
 	if (mgp->msix_vectors == NULL)
-		goto disable_msix;
+		goto no_msix;
 	for (i = 0; i < mgp->num_slices; i++) {
 		mgp->msix_vectors[i].entry = i;
 	}
 
 	while (mgp->num_slices > 1) {
-		/* make sure it is a power of two */
-		while (!is_power_of_2(mgp->num_slices))
-			mgp->num_slices--;
+		mgp->num_slices = rounddown_pow_of_two(mgp->num_slices);
 		if (mgp->num_slices == 1)
-			goto disable_msix;
-		status = pci_enable_msix(pdev, mgp->msix_vectors,
-					 mgp->num_slices);
-		if (status == 0) {
-			pci_disable_msix(pdev);
+			goto no_msix;
+		status = pci_enable_msix_range(pdev,
+					       mgp->msix_vectors,
+					       mgp->num_slices,
+					       mgp->num_slices);
+		if (status < 0)
+			goto no_msix;
+
+		pci_disable_msix(pdev);
+
+		if (status == mgp->num_slices) {
 			if (old_allocated)
 				kfree(old_fw);
 			return;
-		}
-		if (status > 0)
+		} else {
 			mgp->num_slices = status;
-		else
-			goto disable_msix;
+		}
 	}
 
-disable_msix:
+no_msix:
 	if (mgp->msix_vectors != NULL) {
 		kfree(mgp->msix_vectors);
 		mgp->msix_vectors = NULL;
-- 
cgit v1.2.2


From 37a15ed3b9c89f2796dc4e6c7650ad4a2d73e117 Mon Sep 17 00:00:00 2001
From: Alexander Gordeev <agordeev@redhat.com>
Date: Tue, 18 Feb 2014 11:11:50 +0100
Subject: s2io: Use pci_enable_msix_range() instead of pci_enable_msix()

As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range() and pci_enable_msix_range()
interfaces.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: netdev@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/neterion/s2io.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/neterion/s2io.c b/drivers/net/ethernet/neterion/s2io.c
index 9eeddbd0b2c7..56e3a9d42bb2 100644
--- a/drivers/net/ethernet/neterion/s2io.c
+++ b/drivers/net/ethernet/neterion/s2io.c
@@ -3792,9 +3792,10 @@ static int s2io_enable_msi_x(struct s2io_nic *nic)
 	writeq(rx_mat, &bar0->rx_mat);
 	readq(&bar0->rx_mat);
 
-	ret = pci_enable_msix(nic->pdev, nic->entries, nic->num_entries);
+	ret = pci_enable_msix_range(nic->pdev, nic->entries,
+				    nic->num_entries, nic->num_entries);
 	/* We fail init if error or we get less vectors than min required */
-	if (ret) {
+	if (ret < 0) {
 		DBG_PRINT(ERR_DBG, "Enabling MSI-X failed\n");
 		kfree(nic->entries);
 		swstats->mem_freed += nic->num_entries *
-- 
cgit v1.2.2


From 9644cdcd524265a9828dc597d8ef6f41e5bb59a0 Mon Sep 17 00:00:00 2001
From: Alexander Gordeev <agordeev@redhat.com>
Date: Tue, 18 Feb 2014 11:11:51 +0100
Subject: vxge: Use pci_enable_msix_range() instead of pci_enable_msix()

As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range() and pci_enable_msix_range()
interfaces.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: netdev@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/neterion/vxge/vxge-main.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/neterion/vxge/vxge-main.c b/drivers/net/ethernet/neterion/vxge/vxge-main.c
index e46e8698e630..c83cedd26dec 100644
--- a/drivers/net/ethernet/neterion/vxge/vxge-main.c
+++ b/drivers/net/ethernet/neterion/vxge/vxge-main.c
@@ -2349,12 +2349,18 @@ start:
 	vdev->vxge_entries[j].entry = VXGE_ALARM_MSIX_ID;
 	vdev->vxge_entries[j].in_use = 0;
 
-	ret = pci_enable_msix(vdev->pdev, vdev->entries, vdev->intr_cnt);
-	if (ret > 0) {
+	ret = pci_enable_msix_range(vdev->pdev,
+				    vdev->entries, 3, vdev->intr_cnt);
+	if (ret < 0) {
+		ret = -ENODEV;
+		goto enable_msix_failed;
+	} else if (ret < vdev->intr_cnt) {
+		pci_disable_msix(vdev->pdev);
+
 		vxge_debug_init(VXGE_ERR,
 			"%s: MSI-X enable failed for %d vectors, ret: %d",
 			VXGE_DRIVER_NAME, vdev->intr_cnt, ret);
-		if ((max_config_vpath != VXGE_USE_DEFAULT) || (ret < 3)) {
+		if (max_config_vpath != VXGE_USE_DEFAULT) {
 			ret = -ENODEV;
 			goto enable_msix_failed;
 		}
@@ -2368,9 +2374,6 @@ start:
 		vxge_close_vpaths(vdev, temp);
 		vdev->no_of_vpath = temp;
 		goto start;
-	} else if (ret < 0) {
-		ret = -ENODEV;
-		goto enable_msix_failed;
 	}
 	return 0;
 
-- 
cgit v1.2.2


From 61c9471e4d1931cc515872aca59d441a73d82c39 Mon Sep 17 00:00:00 2001
From: Alexander Gordeev <agordeev@redhat.com>
Date: Tue, 18 Feb 2014 11:11:52 +0100
Subject: forcedeth: Fix invalid errno reporting in nv_request_irq()

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Patrick McHardy <kaber@trash.net>
Cc: netdev@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/nvidia/forcedeth.c | 22 ++++++++++++++--------
 1 file changed, 14 insertions(+), 8 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/nvidia/forcedeth.c b/drivers/net/ethernet/nvidia/forcedeth.c
index 70cf97fe67f2..f4270b844a7f 100644
--- a/drivers/net/ethernet/nvidia/forcedeth.c
+++ b/drivers/net/ethernet/nvidia/forcedeth.c
@@ -3952,8 +3952,9 @@ static int nv_request_irq(struct net_device *dev, int intr_test)
 			if (optimization_mode == NV_OPTIMIZATION_MODE_THROUGHPUT && !intr_test) {
 				/* Request irq for rx handling */
 				sprintf(np->name_rx, "%s-rx", dev->name);
-				if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector,
-						nv_nic_irq_rx, IRQF_SHARED, np->name_rx, dev) != 0) {
+				ret = request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector,
+						  nv_nic_irq_rx, IRQF_SHARED, np->name_rx, dev);
+				if (ret) {
 					netdev_info(dev,
 						    "request_irq failed for rx %d\n",
 						    ret);
@@ -3963,8 +3964,9 @@ static int nv_request_irq(struct net_device *dev, int intr_test)
 				}
 				/* Request irq for tx handling */
 				sprintf(np->name_tx, "%s-tx", dev->name);
-				if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_TX].vector,
-						nv_nic_irq_tx, IRQF_SHARED, np->name_tx, dev) != 0) {
+				ret = request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_TX].vector,
+						  nv_nic_irq_tx, IRQF_SHARED, np->name_tx, dev);
+				if (ret) {
 					netdev_info(dev,
 						    "request_irq failed for tx %d\n",
 						    ret);
@@ -3974,8 +3976,9 @@ static int nv_request_irq(struct net_device *dev, int intr_test)
 				}
 				/* Request irq for link and timer handling */
 				sprintf(np->name_other, "%s-other", dev->name);
-				if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_OTHER].vector,
-						nv_nic_irq_other, IRQF_SHARED, np->name_other, dev) != 0) {
+				ret = request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_OTHER].vector,
+						  nv_nic_irq_other, IRQF_SHARED, np->name_other, dev);
+				if (ret) {
 					netdev_info(dev,
 						    "request_irq failed for link %d\n",
 						    ret);
@@ -3991,7 +3994,9 @@ static int nv_request_irq(struct net_device *dev, int intr_test)
 				set_msix_vector_map(dev, NV_MSI_X_VECTOR_OTHER, NVREG_IRQ_OTHER);
 			} else {
 				/* Request irq for all interrupts */
-				if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_ALL].vector, handler, IRQF_SHARED, dev->name, dev) != 0) {
+				ret = request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_ALL].vector,
+						  handler, IRQF_SHARED, dev->name, dev);
+				if (ret) {
 					netdev_info(dev,
 						    "request_irq failed %d\n",
 						    ret);
@@ -4011,7 +4016,8 @@ static int nv_request_irq(struct net_device *dev, int intr_test)
 		ret = pci_enable_msi(np->pci_dev);
 		if (ret == 0) {
 			np->msi_flags |= NV_MSI_ENABLED;
-			if (request_irq(np->pci_dev->irq, handler, IRQF_SHARED, dev->name, dev) != 0) {
+			ret = request_irq(np->pci_dev->irq, handler, IRQF_SHARED, dev->name, dev);
+			if (ret) {
 				netdev_info(dev, "request_irq failed %d\n",
 					    ret);
 				pci_disable_msi(np->pci_dev);
-- 
cgit v1.2.2


From d9bd00a1ddac89a9d370cf9cdee018b9343114fc Mon Sep 17 00:00:00 2001
From: Alexander Gordeev <agordeev@redhat.com>
Date: Tue, 18 Feb 2014 11:11:53 +0100
Subject: forcedeth: Cleanup MSI-X to MSI to INTx fallback code

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Patrick McHardy <kaber@trash.net>
Cc: netdev@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/nvidia/forcedeth.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/nvidia/forcedeth.c b/drivers/net/ethernet/nvidia/forcedeth.c
index f4270b844a7f..74da48939e4e 100644
--- a/drivers/net/ethernet/nvidia/forcedeth.c
+++ b/drivers/net/ethernet/nvidia/forcedeth.c
@@ -3930,7 +3930,7 @@ static int nv_request_irq(struct net_device *dev, int intr_test)
 {
 	struct fe_priv *np = get_nvpriv(dev);
 	u8 __iomem *base = get_hwbase(dev);
-	int ret = 1;
+	int ret;
 	int i;
 	irqreturn_t (*handler)(int foo, void *data);
 
@@ -4010,9 +4010,10 @@ static int nv_request_irq(struct net_device *dev, int intr_test)
 				writel(0, base + NvRegMSIXMap1);
 			}
 			netdev_info(dev, "MSI-X enabled\n");
+			return 0;
 		}
 	}
-	if (ret != 0 && np->msi_flags & NV_MSI_CAPABLE) {
+	if (np->msi_flags & NV_MSI_CAPABLE) {
 		ret = pci_enable_msi(np->pci_dev);
 		if (ret == 0) {
 			np->msi_flags |= NV_MSI_ENABLED;
@@ -4031,13 +4032,12 @@ static int nv_request_irq(struct net_device *dev, int intr_test)
 			/* enable msi vector 0 */
 			writel(NVREG_MSI_VECTOR_0_ENABLED, base + NvRegMSIIrqMask);
 			netdev_info(dev, "MSI enabled\n");
+			return 0;
 		}
 	}
-	if (ret != 0) {
-		if (request_irq(np->pci_dev->irq, handler, IRQF_SHARED, dev->name, dev) != 0)
-			goto out_err;
 
-	}
+	if (request_irq(np->pci_dev->irq, handler, IRQF_SHARED, dev->name, dev) != 0)
+		goto out_err;
 
 	return 0;
 out_free_tx:
-- 
cgit v1.2.2


From 04698ef3a00b2cb575fcc2c0e625563c6c90520d Mon Sep 17 00:00:00 2001
From: Alexander Gordeev <agordeev@redhat.com>
Date: Tue, 18 Feb 2014 11:11:54 +0100
Subject: forcedeth: Use pci_enable_msix_range() instead of pci_enable_msix()

As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range() and pci_enable_msix_range()
interfaces.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Patrick McHardy <kaber@trash.net>
Cc: netdev@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/nvidia/forcedeth.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/nvidia/forcedeth.c b/drivers/net/ethernet/nvidia/forcedeth.c
index 74da48939e4e..bad3c057ee8a 100644
--- a/drivers/net/ethernet/nvidia/forcedeth.c
+++ b/drivers/net/ethernet/nvidia/forcedeth.c
@@ -3946,8 +3946,11 @@ static int nv_request_irq(struct net_device *dev, int intr_test)
 	if (np->msi_flags & NV_MSI_X_CAPABLE) {
 		for (i = 0; i < (np->msi_flags & NV_MSI_X_VECTORS_MASK); i++)
 			np->msi_x_entry[i].entry = i;
-		ret = pci_enable_msix(np->pci_dev, np->msi_x_entry, (np->msi_flags & NV_MSI_X_VECTORS_MASK));
-		if (ret == 0) {
+		ret = pci_enable_msix_range(np->pci_dev,
+					    np->msi_x_entry,
+					    np->msi_flags & NV_MSI_X_VECTORS_MASK,
+					    np->msi_flags & NV_MSI_X_VECTORS_MASK);
+		if (ret > 0) {
 			np->msi_flags |= NV_MSI_X_ENABLED;
 			if (optimization_mode == NV_OPTIMIZATION_MODE_THROUGHPUT && !intr_test) {
 				/* Request irq for rx handling */
-- 
cgit v1.2.2


From 4a6768d3ed592ca662a0ccc3c3b3a54f01237f5e Mon Sep 17 00:00:00 2001
From: Alexander Gordeev <agordeev@redhat.com>
Date: Tue, 18 Feb 2014 11:11:55 +0100
Subject: netxen: Use pci_enable_msix_range() instead of pci_enable_msix()

As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range() and pci_enable_msix_range()
interfaces.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Manish Chopra <manish.chopra@qlogic.com>
Cc: Sony Chacko <sony.chacko@qlogic.com>
Cc: Rajesh Borundia <rajesh.borundia@qlogic.com>
Cc: netdev@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
index 70849dea32b1..f09c35d669b3 100644
--- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
+++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
@@ -643,8 +643,9 @@ static int netxen_setup_msi_interrupts(struct netxen_adapter *adapter,
 
 	if (adapter->msix_supported) {
 		netxen_init_msix_entries(adapter, num_msix);
-		err = pci_enable_msix(pdev, adapter->msix_entries, num_msix);
-		if (err == 0) {
+		err = pci_enable_msix_range(pdev, adapter->msix_entries,
+					    num_msix, num_msix);
+		if (err > 0) {
 			adapter->flags |= NETXEN_NIC_MSIX_ENABLED;
 			netxen_set_msix_bit(pdev, 1);
 
-- 
cgit v1.2.2


From 74a1fa45eba3958cbc6a6f726525e38263ea4cbf Mon Sep 17 00:00:00 2001
From: Alexander Gordeev <agordeev@redhat.com>
Date: Tue, 18 Feb 2014 11:11:56 +0100
Subject: qlcnic: Cleanup qlcnic_enable_msix() return values

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Himanshu Madhani <himanshu.madhani@qlogic.com>
Cc: Rajesh Borundia <rajesh.borundia@qlogic.com>
Cc: Shahed Shaikh <shahed.shaikh@qlogic.com>
Cc: linux-driver@qlogic.com
Cc: netdev@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
index ba78c7481fa3..0c077cfc388b 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
@@ -684,7 +684,7 @@ restore:
 int qlcnic_enable_msix(struct qlcnic_adapter *adapter, u32 num_msix)
 {
 	struct pci_dev *pdev = adapter->pdev;
-	int err = -1, vector;
+	int err, vector;
 
 	if (!adapter->msix_entries) {
 		adapter->msix_entries = kcalloc(num_msix,
@@ -706,7 +706,7 @@ enable_msix:
 			adapter->flags |= QLCNIC_MSIX_ENABLED;
 			adapter->ahw->num_msix = num_msix;
 			dev_info(&pdev->dev, "using msi-x interrupts\n");
-			return err;
+			return 0;
 		} else if (err > 0) {
 			dev_info(&pdev->dev,
 				 "Unable to allocate %d MSI-X vectors, Available vectors %d\n",
@@ -715,12 +715,12 @@ enable_msix:
 			if (qlcnic_82xx_check(adapter)) {
 				num_msix = rounddown_pow_of_two(err);
 				if (err < QLCNIC_82XX_MINIMUM_VECTOR)
-					return -EIO;
+					return -ENOSPC;
 			} else {
 				num_msix = rounddown_pow_of_two(err - 1);
 				num_msix += 1;
 				if (err < QLCNIC_83XX_MINIMUM_VECTOR)
-					return -EIO;
+					return -ENOSPC;
 			}
 
 			if (qlcnic_82xx_check(adapter) &&
@@ -747,7 +747,7 @@ enable_msix:
 		}
 	}
 
-	return err;
+	return -EIO;
 }
 
 static int qlcnic_82xx_calculate_msix_vector(struct qlcnic_adapter *adapter)
-- 
cgit v1.2.2


From 9732ec06ca1ba91d69d1787d66bd10a502b143e0 Mon Sep 17 00:00:00 2001
From: Alexander Gordeev <agordeev@redhat.com>
Date: Tue, 18 Feb 2014 11:11:57 +0100
Subject: qlcnic: Use pci_enable_msix_range() instead of pci_enable_msix()

As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range() and pci_enable_msix_range()
interfaces.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Himanshu Madhani <himanshu.madhani@qlogic.com>
Cc: Rajesh Borundia <rajesh.borundia@qlogic.com>
Cc: Shahed Shaikh <shahed.shaikh@qlogic.com>
Cc: linux-driver@qlogic.com
Cc: netdev@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
index 0c077cfc388b..e07fd948d98b 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
@@ -701,13 +701,17 @@ enable_msix:
 		for (vector = 0; vector < num_msix; vector++)
 			adapter->msix_entries[vector].entry = vector;
 
-		err = pci_enable_msix(pdev, adapter->msix_entries, num_msix);
-		if (err == 0) {
+		err = pci_enable_msix_range(pdev,
+					    adapter->msix_entries, 1, num_msix);
+
+		if (err == num_msix) {
 			adapter->flags |= QLCNIC_MSIX_ENABLED;
 			adapter->ahw->num_msix = num_msix;
 			dev_info(&pdev->dev, "using msi-x interrupts\n");
 			return 0;
 		} else if (err > 0) {
+			pci_disable_msix(pdev);
+
 			dev_info(&pdev->dev,
 				 "Unable to allocate %d MSI-X vectors, Available vectors %d\n",
 				 num_msix, err);
-- 
cgit v1.2.2


From 7f8358c908c1c3bc3c222ebc1ea5dba8c8dc0c1a Mon Sep 17 00:00:00 2001
From: Alexander Gordeev <agordeev@redhat.com>
Date: Tue, 18 Feb 2014 11:11:58 +0100
Subject: qlge: Get rid of an redundant assignment

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Shahed Shaikh <shahed.shaikh@qlogic.com>
Cc: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Cc: Ron Mercer <ron.mercer@qlogic.com>
Cc: linux-driver@qlogic.com
Cc: netdev@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Acked-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/qlogic/qlge/qlge_main.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/qlogic/qlge/qlge_main.c b/drivers/net/ethernet/qlogic/qlge/qlge_main.c
index ce2cfddbed50..82bace5e536b 100644
--- a/drivers/net/ethernet/qlogic/qlge/qlge_main.c
+++ b/drivers/net/ethernet/qlogic/qlge/qlge_main.c
@@ -3346,7 +3346,6 @@ static void ql_enable_msix(struct ql_adapter *qdev)
 			qdev->msi_x_entry = NULL;
 			netif_warn(qdev, ifup, qdev->ndev,
 				   "MSI-X Enable failed, trying MSI.\n");
-			qdev->intr_count = 1;
 			qlge_irq_type = MSI_IRQ;
 		} else if (err == 0) {
 			set_bit(QL_MSIX_ENABLED, &qdev->flags);
-- 
cgit v1.2.2


From 50b483a1457abd6fe27117f0507297e107ef42b2 Mon Sep 17 00:00:00 2001
From: Alexander Gordeev <agordeev@redhat.com>
Date: Tue, 18 Feb 2014 11:11:59 +0100
Subject: qlge: Use pci_enable_msix_range() instead of pci_enable_msix()

As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range() and pci_enable_msix_range()
interfaces.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Shahed Shaikh <shahed.shaikh@qlogic.com>
Cc: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Cc: Ron Mercer <ron.mercer@qlogic.com>
Cc: linux-driver@qlogic.com
Cc: netdev@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Acked-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/qlogic/qlge/qlge_main.c | 15 ++++-----------
 1 file changed, 4 insertions(+), 11 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/qlogic/qlge/qlge_main.c b/drivers/net/ethernet/qlogic/qlge/qlge_main.c
index 82bace5e536b..adf87d26e68f 100644
--- a/drivers/net/ethernet/qlogic/qlge/qlge_main.c
+++ b/drivers/net/ethernet/qlogic/qlge/qlge_main.c
@@ -3331,23 +3331,16 @@ static void ql_enable_msix(struct ql_adapter *qdev)
 		for (i = 0; i < qdev->intr_count; i++)
 			qdev->msi_x_entry[i].entry = i;
 
-		/* Loop to get our vectors.  We start with
-		 * what we want and settle for what we get.
-		 */
-		do {
-			err = pci_enable_msix(qdev->pdev,
-				qdev->msi_x_entry, qdev->intr_count);
-			if (err > 0)
-				qdev->intr_count = err;
-		} while (err > 0);
-
+		err = pci_enable_msix_range(qdev->pdev, qdev->msi_x_entry,
+					    1, qdev->intr_count);
 		if (err < 0) {
 			kfree(qdev->msi_x_entry);
 			qdev->msi_x_entry = NULL;
 			netif_warn(qdev, ifup, qdev->ndev,
 				   "MSI-X Enable failed, trying MSI.\n");
 			qlge_irq_type = MSI_IRQ;
-		} else if (err == 0) {
+		} else {
+			qdev->intr_count = err;
 			set_bit(QL_MSIX_ENABLED, &qdev->flags);
 			netif_info(qdev, ifup, qdev->ndev,
 				   "MSI-X Enabled, got %d vectors.\n",
-- 
cgit v1.2.2


From 184603d8825773afae24279e055440dddada478d Mon Sep 17 00:00:00 2001
From: Alexander Gordeev <agordeev@redhat.com>
Date: Tue, 18 Feb 2014 11:12:00 +0100
Subject: sfc: Use pci_enable_msix_range() instead of pci_enable_msix()

As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range() and pci_enable_msix_range()
interfaces.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Shradha Shah <sshah@solarflare.com>
Cc: linux-net-drivers@solarflare.com
Cc: netdev@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Acked-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/sfc/efx.c | 20 +++++++++-----------
 1 file changed, 9 insertions(+), 11 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/sfc/efx.c b/drivers/net/ethernet/sfc/efx.c
index 62d1a78984c1..d72e0038a740 100644
--- a/drivers/net/ethernet/sfc/efx.c
+++ b/drivers/net/ethernet/sfc/efx.c
@@ -1344,20 +1344,23 @@ static int efx_probe_interrupts(struct efx_nic *efx)
 
 		for (i = 0; i < n_channels; i++)
 			xentries[i].entry = i;
-		rc = pci_enable_msix(efx->pci_dev, xentries, n_channels);
-		if (rc > 0) {
+		rc = pci_enable_msix_range(efx->pci_dev,
+					   xentries, 1, n_channels);
+		if (rc < 0) {
+			/* Fall back to single channel MSI */
+			efx->interrupt_mode = EFX_INT_MODE_MSI;
+			netif_err(efx, drv, efx->net_dev,
+				  "could not enable MSI-X\n");
+		} else if (rc < n_channels) {
 			netif_err(efx, drv, efx->net_dev,
 				  "WARNING: Insufficient MSI-X vectors"
 				  " available (%d < %u).\n", rc, n_channels);
 			netif_err(efx, drv, efx->net_dev,
 				  "WARNING: Performance may be reduced.\n");
-			EFX_BUG_ON_PARANOID(rc >= n_channels);
 			n_channels = rc;
-			rc = pci_enable_msix(efx->pci_dev, xentries,
-					     n_channels);
 		}
 
-		if (rc == 0) {
+		if (rc > 0) {
 			efx->n_channels = n_channels;
 			if (n_channels > extra_channels)
 				n_channels -= extra_channels;
@@ -1373,11 +1376,6 @@ static int efx_probe_interrupts(struct efx_nic *efx)
 			for (i = 0; i < efx->n_channels; i++)
 				efx_get_channel(efx, i)->irq =
 					xentries[i].vector;
-		} else {
-			/* Fall back to single channel MSI */
-			efx->interrupt_mode = EFX_INT_MODE_MSI;
-			netif_err(efx, drv, efx->net_dev,
-				  "could not enable MSI-X\n");
 		}
 	}
 
-- 
cgit v1.2.2


From 9e7df17e2e98aa82aaff9ef79235799a75e05f13 Mon Sep 17 00:00:00 2001
From: Alexander Gordeev <agordeev@redhat.com>
Date: Tue, 18 Feb 2014 11:12:01 +0100
Subject: niu: Use pci_enable_msix_range() instead of pci_enable_msix()

As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range() and pci_enable_msix_range()
interfaces.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jingoo Han <jg1.han@samsung.com>
Cc: netdev@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/sun/niu.c | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/sun/niu.c b/drivers/net/ethernet/sun/niu.c
index 8e2266e1f260..79606f47a08e 100644
--- a/drivers/net/ethernet/sun/niu.c
+++ b/drivers/net/ethernet/sun/niu.c
@@ -9041,7 +9041,7 @@ static void niu_try_msix(struct niu *np, u8 *ldg_num_map)
 	struct msix_entry msi_vec[NIU_NUM_LDG];
 	struct niu_parent *parent = np->parent;
 	struct pci_dev *pdev = np->pdev;
-	int i, num_irqs, err;
+	int i, num_irqs;
 	u8 first_ldg;
 
 	first_ldg = (NIU_NUM_LDG / parent->num_ports) * np->port;
@@ -9053,21 +9053,16 @@ static void niu_try_msix(struct niu *np, u8 *ldg_num_map)
 		    (np->port == 0 ? 3 : 1));
 	BUG_ON(num_irqs > (NIU_NUM_LDG / parent->num_ports));
 
-retry:
 	for (i = 0; i < num_irqs; i++) {
 		msi_vec[i].vector = 0;
 		msi_vec[i].entry = i;
 	}
 
-	err = pci_enable_msix(pdev, msi_vec, num_irqs);
-	if (err < 0) {
+	num_irqs = pci_enable_msix_range(pdev, msi_vec, 1, num_irqs);
+	if (num_irqs < 0) {
 		np->flags &= ~NIU_FLAGS_MSIX;
 		return;
 	}
-	if (err > 0) {
-		num_irqs = err;
-		goto retry;
-	}
 
 	np->flags |= NIU_FLAGS_MSIX;
 	for (i = 0; i < num_irqs; i++)
-- 
cgit v1.2.2


From b60b869d5f9f0987cf4e3fee22fb88786a281de7 Mon Sep 17 00:00:00 2001
From: Alexander Gordeev <agordeev@redhat.com>
Date: Tue, 18 Feb 2014 11:12:02 +0100
Subject: vmxnet3: Fix MSI-X/MSI enablement code

This update cleans up the MSI-X/MSI enablement code, fixes
vmxnet3_acquire_msix_vectors() invalid return values and
enables a dead code in case VMXNET3_LINUX_MIN_MSIX_VECT
MSI-X vectors were allocated.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Shreyas Bhatewara <sbhatewara@vmware.com>
Cc: pv-drivers@vmware.com
Cc: netdev@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/vmxnet3/vmxnet3_drv.c | 101 +++++++++++++++++---------------------
 1 file changed, 46 insertions(+), 55 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c
index 3be786faaaec..3a17797e0817 100644
--- a/drivers/net/vmxnet3/vmxnet3_drv.c
+++ b/drivers/net/vmxnet3/vmxnet3_drv.c
@@ -2729,47 +2729,44 @@ vmxnet3_read_mac_addr(struct vmxnet3_adapter *adapter, u8 *mac)
 /*
  * Enable MSIx vectors.
  * Returns :
- *	0 on successful enabling of required vectors,
  *	VMXNET3_LINUX_MIN_MSIX_VECT when only minimum number of vectors required
- *	 could be enabled.
- *	number of vectors which can be enabled otherwise (this number is smaller
+ *	 were enabled.
+ *	number of vectors which were enabled otherwise (this number is greater
  *	 than VMXNET3_LINUX_MIN_MSIX_VECT)
  */
 
 static int
-vmxnet3_acquire_msix_vectors(struct vmxnet3_adapter *adapter,
-			     int vectors)
+vmxnet3_acquire_msix_vectors(struct vmxnet3_adapter *adapter, int nvec)
 {
-	int err = 0, vector_threshold;
-	vector_threshold = VMXNET3_LINUX_MIN_MSIX_VECT;
-
-	while (vectors >= vector_threshold) {
-		err = pci_enable_msix(adapter->pdev, adapter->intr.msix_entries,
-				      vectors);
+	do {
+		int err = pci_enable_msix(adapter->pdev,
+					  adapter->intr.msix_entries, nvec);
 		if (!err) {
-			adapter->intr.num_intrs = vectors;
-			return 0;
+			return nvec;
 		} else if (err < 0) {
 			dev_err(&adapter->netdev->dev,
-				   "Failed to enable MSI-X, error: %d\n", err);
-			vectors = 0;
-		} else if (err < vector_threshold) {
-			break;
+				"Failed to enable MSI-X, error: %d\n", err);
+			return err;
+		} else if (err < VMXNET3_LINUX_MIN_MSIX_VECT) {
+			dev_info(&adapter->pdev->dev,
+				 "Number of MSI-X which can be allocated "
+				 "is lower than min threshold required.\n");
+			return -ENOSPC;
 		} else {
 			/* If fails to enable required number of MSI-x vectors
 			 * try enabling minimum number of vectors required.
 			 */
 			dev_err(&adapter->netdev->dev,
-				"Failed to enable %d MSI-X, trying %d instead\n",
-				    vectors, vector_threshold);
-			vectors = vector_threshold;
+				"Failed to enable %d MSI-X, trying %d\n",
+				nvec, VMXNET3_LINUX_MIN_MSIX_VECT);
+			nvec = VMXNET3_LINUX_MIN_MSIX_VECT;
 		}
-	}
+	} while (nvec >= VMXNET3_LINUX_MIN_MSIX_VECT);
 
-	dev_info(&adapter->pdev->dev,
-		 "Number of MSI-X interrupts which can be allocated "
-		 "is lower than min threshold required.\n");
-	return err;
+	/*
+	 * Should never get here
+	 */
+	return -ENOSPC;
 }
 
 
@@ -2796,56 +2793,50 @@ vmxnet3_alloc_intr_resources(struct vmxnet3_adapter *adapter)
 
 #ifdef CONFIG_PCI_MSI
 	if (adapter->intr.type == VMXNET3_IT_MSIX) {
-		int vector, err = 0;
-
-		adapter->intr.num_intrs = (adapter->share_intr ==
-					   VMXNET3_INTR_TXSHARE) ? 1 :
-					   adapter->num_tx_queues;
-		adapter->intr.num_intrs += (adapter->share_intr ==
-					   VMXNET3_INTR_BUDDYSHARE) ? 0 :
-					   adapter->num_rx_queues;
-		adapter->intr.num_intrs += 1;		/* for link event */
-
-		adapter->intr.num_intrs = (adapter->intr.num_intrs >
-					   VMXNET3_LINUX_MIN_MSIX_VECT
-					   ? adapter->intr.num_intrs :
-					   VMXNET3_LINUX_MIN_MSIX_VECT);
-
-		for (vector = 0; vector < adapter->intr.num_intrs; vector++)
-			adapter->intr.msix_entries[vector].entry = vector;
-
-		err = vmxnet3_acquire_msix_vectors(adapter,
-						   adapter->intr.num_intrs);
+		int i, nvec;
+
+		nvec  = adapter->share_intr == VMXNET3_INTR_TXSHARE ?
+			1 : adapter->num_tx_queues;
+		nvec += adapter->share_intr == VMXNET3_INTR_BUDDYSHARE ?
+			0 : adapter->num_rx_queues;
+		nvec += 1;	/* for link event */
+		nvec = nvec > VMXNET3_LINUX_MIN_MSIX_VECT ?
+		       nvec : VMXNET3_LINUX_MIN_MSIX_VECT;
+
+		for (i = 0; i < nvec; i++)
+			adapter->intr.msix_entries[i].entry = i;
+
+		nvec = vmxnet3_acquire_msix_vectors(adapter, nvec);
+		if (nvec < 0)
+			goto msix_err;
+
 		/* If we cannot allocate one MSIx vector per queue
 		 * then limit the number of rx queues to 1
 		 */
-		if (err == VMXNET3_LINUX_MIN_MSIX_VECT) {
+		if (nvec == VMXNET3_LINUX_MIN_MSIX_VECT) {
 			if (adapter->share_intr != VMXNET3_INTR_BUDDYSHARE
 			    || adapter->num_rx_queues != 1) {
 				adapter->share_intr = VMXNET3_INTR_TXSHARE;
 				netdev_err(adapter->netdev,
 					   "Number of rx queues : 1\n");
 				adapter->num_rx_queues = 1;
-				adapter->intr.num_intrs =
-						VMXNET3_LINUX_MIN_MSIX_VECT;
 			}
-			return;
 		}
-		if (!err)
-			return;
 
+		adapter->intr.num_intrs = nvec;
+		return;
+
+msix_err:
 		/* If we cannot allocate MSIx vectors use only one rx queue */
 		dev_info(&adapter->pdev->dev,
 			 "Failed to enable MSI-X, error %d. "
-			 "Limiting #rx queues to 1, try MSI.\n", err);
+			 "Limiting #rx queues to 1, try MSI.\n", nvec);
 
 		adapter->intr.type = VMXNET3_IT_MSI;
 	}
 
 	if (adapter->intr.type == VMXNET3_IT_MSI) {
-		int err;
-		err = pci_enable_msi(adapter->pdev);
-		if (!err) {
+		if (!pci_enable_msi(adapter->pdev)) {
 			adapter->num_rx_queues = 1;
 			adapter->intr.num_intrs = 1;
 			return;
-- 
cgit v1.2.2


From c0a1be3842c73128187a6d10623b011a8fa2dee6 Mon Sep 17 00:00:00 2001
From: Alexander Gordeev <agordeev@redhat.com>
Date: Tue, 18 Feb 2014 11:12:03 +0100
Subject: vmxnet3: Use pci_enable_msix_range() instead of pci_enable_msix()

As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range() and pci_enable_msix_range()
interfaces.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Shreyas Bhatewara <sbhatewara@vmware.com>
Cc: pv-drivers@vmware.com
Cc: netdev@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/vmxnet3/vmxnet3_drv.c | 47 ++++++++++++++++-----------------------
 1 file changed, 19 insertions(+), 28 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c
index 3a17797e0817..9275c8c423b1 100644
--- a/drivers/net/vmxnet3/vmxnet3_drv.c
+++ b/drivers/net/vmxnet3/vmxnet3_drv.c
@@ -2738,35 +2738,26 @@ vmxnet3_read_mac_addr(struct vmxnet3_adapter *adapter, u8 *mac)
 static int
 vmxnet3_acquire_msix_vectors(struct vmxnet3_adapter *adapter, int nvec)
 {
-	do {
-		int err = pci_enable_msix(adapter->pdev,
-					  adapter->intr.msix_entries, nvec);
-		if (!err) {
-			return nvec;
-		} else if (err < 0) {
-			dev_err(&adapter->netdev->dev,
-				"Failed to enable MSI-X, error: %d\n", err);
-			return err;
-		} else if (err < VMXNET3_LINUX_MIN_MSIX_VECT) {
-			dev_info(&adapter->pdev->dev,
-				 "Number of MSI-X which can be allocated "
-				 "is lower than min threshold required.\n");
-			return -ENOSPC;
-		} else {
-			/* If fails to enable required number of MSI-x vectors
-			 * try enabling minimum number of vectors required.
-			 */
-			dev_err(&adapter->netdev->dev,
-				"Failed to enable %d MSI-X, trying %d\n",
-				nvec, VMXNET3_LINUX_MIN_MSIX_VECT);
-			nvec = VMXNET3_LINUX_MIN_MSIX_VECT;
-		}
-	} while (nvec >= VMXNET3_LINUX_MIN_MSIX_VECT);
+	int ret = pci_enable_msix_range(adapter->pdev,
+					adapter->intr.msix_entries, nvec, nvec);
 
-	/*
-	 * Should never get here
-	 */
-	return -ENOSPC;
+	if (ret == -ENOSPC && nvec > VMXNET3_LINUX_MIN_MSIX_VECT) {
+		dev_err(&adapter->netdev->dev,
+			"Failed to enable %d MSI-X, trying %d\n",
+			nvec, VMXNET3_LINUX_MIN_MSIX_VECT);
+
+		ret = pci_enable_msix_range(adapter->pdev,
+					    adapter->intr.msix_entries,
+					    VMXNET3_LINUX_MIN_MSIX_VECT,
+					    VMXNET3_LINUX_MIN_MSIX_VECT);
+	}
+
+	if (ret < 0) {
+		dev_err(&adapter->netdev->dev,
+			"Failed to enable MSI-X, error: %d\n", ret);
+	}
+
+	return ret;
 }
 
 
-- 
cgit v1.2.2


From b4b39061da4d28c15341378e615948936e6d148f Mon Sep 17 00:00:00 2001
From: Alexander Gordeev <agordeev@redhat.com>
Date: Tue, 18 Feb 2014 11:12:04 +0100
Subject: wil6210: Use pci_enable_msi_range() instead of pci_enable_msi_block()

As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range() and pci_enable_msix_range()
interfaces.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Cc: "John W. Linville" <linville@tuxdriver.com>
Cc: wil6210@qca.qualcomm.com
Cc: netdev@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Acked-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/wireless/ath/wil6210/pcie_bus.c | 32 ++++++++++++++---------------
 1 file changed, 15 insertions(+), 17 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/wil6210/pcie_bus.c b/drivers/net/wireless/ath/wil6210/pcie_bus.c
index eeceab39cda2..e1c8cc4a4b92 100644
--- a/drivers/net/wireless/ath/wil6210/pcie_bus.c
+++ b/drivers/net/wireless/ath/wil6210/pcie_bus.c
@@ -41,30 +41,28 @@ static int wil_if_pcie_enable(struct wil6210_priv *wil)
 	switch (use_msi) {
 	case 3:
 	case 1:
+		wil_dbg_misc(wil, "Setup %d MSI interrupts\n", use_msi);
+		break;
 	case 0:
+		wil_dbg_misc(wil, "MSI interrupts disabled, use INTx\n");
 		break;
 	default:
-		wil_err(wil, "Invalid use_msi=%d, default to 1\n",
-			use_msi);
+		wil_err(wil, "Invalid use_msi=%d, default to 1\n", use_msi);
 		use_msi = 1;
 	}
-	wil->n_msi = use_msi;
-	if (wil->n_msi) {
-		wil_dbg_misc(wil, "Setup %d MSI interrupts\n", use_msi);
-		rc = pci_enable_msi_block(pdev, wil->n_msi);
-		if (rc && (wil->n_msi == 3)) {
-			wil_err(wil, "3 MSI mode failed, try 1 MSI\n");
-			wil->n_msi = 1;
-			rc = pci_enable_msi_block(pdev, wil->n_msi);
-		}
-		if (rc) {
-			wil_err(wil, "pci_enable_msi failed, use INTx\n");
-			wil->n_msi = 0;
-		}
-	} else {
-		wil_dbg_misc(wil, "MSI interrupts disabled, use INTx\n");
+
+	if (use_msi == 3 && pci_enable_msi_range(pdev, 3, 3) < 0) {
+		wil_err(wil, "3 MSI mode failed, try 1 MSI\n");
+		use_msi = 1;
+	}
+
+	if (use_msi == 1 && pci_enable_msi(pdev)) {
+		wil_err(wil, "pci_enable_msi failed, use INTx\n");
+		use_msi = 0;
 	}
 
+	wil->n_msi = use_msi;
+
 	rc = wil6210_init_irq(wil, pdev->irq);
 	if (rc)
 		goto stop_master;
-- 
cgit v1.2.2


From 72aca4bfce3a39be98e40ce0b18776b9f91022f4 Mon Sep 17 00:00:00 2001
From: Kumar Sanghvi <kumaras@chelsio.com>
Date: Tue, 18 Feb 2014 17:56:08 +0530
Subject: cxgb4: Add support to recognize 40G links

Also, create a new Common Code interface to translate Firmware Port Technology
Type values (enum fw_port_type) to string descriptions.  This will allow us
to maintain the description translation table in one place rather than in
every driver.

Based on original work by Scott Bardone and Casey Leedom <leedom@chelsio.com>

Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/chelsio/cxgb4/cxgb4.h      |  2 +-
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 24 +++++++++++------
 drivers/net/ethernet/chelsio/cxgb4/t4_hw.c      | 35 ++++++++++++++++++++++++-
 drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h   |  3 +++
 4 files changed, 54 insertions(+), 10 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
index 1f4b9b30b9ed..0c4edd1db761 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
@@ -957,7 +957,7 @@ int t4_mc_read(struct adapter *adap, int idx, u32 addr, __be32 *data,
 	       u64 *parity);
 int t4_edc_read(struct adapter *adap, int idx, u32 addr, __be32 *data,
 		u64 *parity);
-
+const char *t4_get_port_type_description(enum fw_port_type port_type);
 void t4_get_port_stats(struct adapter *adap, int idx, struct port_stats *p);
 void t4_read_mtu_tbl(struct adapter *adap, u16 *mtus, u8 *mtu_log);
 void t4_tp_wr_bits_indirect(struct adapter *adap, unsigned int addr,
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index bd0321d8b612..1da4adb013b3 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -432,6 +432,9 @@ static void link_report(struct net_device *dev)
 		case SPEED_100:
 			s = "100Mbps";
 			break;
+		case 40000: /* Need a SPEED_40000 in ethtool.h */
+			s = "40Gbps";
+			break;
 		}
 
 		netdev_info(dev, "link up, %s, full-duplex, %s PAUSE\n", s,
@@ -2199,6 +2202,8 @@ static unsigned int from_fw_linkcaps(unsigned int type, unsigned int caps)
 	else if (type == FW_PORT_TYPE_FIBER_XFI ||
 		 type == FW_PORT_TYPE_FIBER_XAUI || type == FW_PORT_TYPE_SFP)
 		v |= SUPPORTED_FIBRE;
+	else if (type == FW_PORT_TYPE_BP40_BA)
+		v |= SUPPORTED_40000baseSR4_Full;
 
 	if (caps & FW_PORT_CAP_ANEG)
 		v |= SUPPORTED_Autoneg;
@@ -2215,6 +2220,8 @@ static unsigned int to_fw_linkcaps(unsigned int caps)
 		v |= FW_PORT_CAP_SPEED_1G;
 	if (caps & ADVERTISED_10000baseT_Full)
 		v |= FW_PORT_CAP_SPEED_10G;
+	if (caps & ADVERTISED_40000baseSR4_Full)
+		v |= FW_PORT_CAP_SPEED_40G;
 	return v;
 }
 
@@ -2269,6 +2276,8 @@ static unsigned int speed_to_caps(int speed)
 		return FW_PORT_CAP_SPEED_1G;
 	if (speed == SPEED_10000)
 		return FW_PORT_CAP_SPEED_10G;
+	if (speed == 40000) /* Need SPEED_40000 in ethtool.h */
+		return FW_PORT_CAP_SPEED_40G;
 	return 0;
 }
 
@@ -2296,8 +2305,10 @@ static int set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 	if (cmd->autoneg == AUTONEG_DISABLE) {
 		cap = speed_to_caps(speed);
 
-		if (!(lc->supported & cap) || (speed == SPEED_1000) ||
-		    (speed == SPEED_10000))
+		if (!(lc->supported & cap) ||
+		    (speed == SPEED_1000) ||
+		    (speed == SPEED_10000) ||
+		    (speed == 40000))
 			return -EINVAL;
 		lc->requested_speed = cap;
 		lc->advertising = 0;
@@ -5799,11 +5810,6 @@ static int init_rss(struct adapter *adap)
 
 static void print_port_info(const struct net_device *dev)
 {
-	static const char *base[] = {
-		"R XFI", "R XAUI", "T SGMII", "T XFI", "T XAUI", "KX4", "CX4",
-		"KX", "KR", "R SFP+", "KR/KX", "KR/KX/KX4"
-	};
-
 	char buf[80];
 	char *bufp = buf;
 	const char *spd = "";
@@ -5821,9 +5827,11 @@ static void print_port_info(const struct net_device *dev)
 		bufp += sprintf(bufp, "1000/");
 	if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_10G)
 		bufp += sprintf(bufp, "10G/");
+	if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_40G)
+		bufp += sprintf(bufp, "40G/");
 	if (bufp != buf)
 		--bufp;
-	sprintf(bufp, "BASE-%s", base[pi->port_type]);
+	sprintf(bufp, "BASE-%s", t4_get_port_type_description(pi->port_type));
 
 	netdev_info(dev, "Chelsio %s rev %d %s %sNIC PCIe x%d%s%s\n",
 		    adap->params.vpd.id,
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
index 2c109343d570..514c525e99cf 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
@@ -1155,7 +1155,8 @@ out:
 }
 
 #define ADVERT_MASK (FW_PORT_CAP_SPEED_100M | FW_PORT_CAP_SPEED_1G |\
-		     FW_PORT_CAP_SPEED_10G | FW_PORT_CAP_ANEG)
+		     FW_PORT_CAP_SPEED_10G | FW_PORT_CAP_SPEED_40G | \
+		     FW_PORT_CAP_ANEG)
 
 /**
  *	t4_link_start - apply link configuration to MAC/PHY
@@ -2246,6 +2247,36 @@ static unsigned int get_mps_bg_map(struct adapter *adap, int idx)
 	return 1 << idx;
 }
 
+/**
+ *      t4_get_port_type_description - return Port Type string description
+ *      @port_type: firmware Port Type enumeration
+ */
+const char *t4_get_port_type_description(enum fw_port_type port_type)
+{
+	static const char *const port_type_description[] = {
+		"R XFI",
+		"R XAUI",
+		"T SGMII",
+		"T XFI",
+		"T XAUI",
+		"KX4",
+		"CX4",
+		"KX",
+		"KR",
+		"R SFP+",
+		"KR/KX",
+		"KR/KX/KX4",
+		"R QSFP_10G",
+		"",
+		"R QSFP",
+		"R BP40_BA",
+	};
+
+	if (port_type < ARRAY_SIZE(port_type_description))
+		return port_type_description[port_type];
+	return "UNKNOWN";
+}
+
 /**
  *	t4_get_port_stats - collect port statistics
  *	@adap: the adapter
@@ -3538,6 +3569,8 @@ int t4_handle_fw_rpl(struct adapter *adap, const __be64 *rpl)
 			speed = SPEED_1000;
 		else if (stat & FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_10G))
 			speed = SPEED_10000;
+		else if (stat & FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_40G))
+			speed = 40000; /* Need SPEED_40000 in ethtool.h */
 
 		if (link_ok != lc->link_ok || speed != lc->speed ||
 		    fc != lc->fc) {                    /* something changed */
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h b/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h
index 74fea74ce0aa..af6e12480e51 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h
@@ -1742,6 +1742,9 @@ enum fw_port_type {
 	FW_PORT_TYPE_SFP,
 	FW_PORT_TYPE_BP_AP,
 	FW_PORT_TYPE_BP4_AP,
+	FW_PORT_TYPE_QSFP_10G,
+	FW_PORT_TYPE_QSFP,
+	FW_PORT_TYPE_BP40_BA,
 
 	FW_PORT_TYPE_NONE = FW_PORT_CMD_PTYPE_MASK
 };
-- 
cgit v1.2.2


From a94cd70521151d107bb069f0c15d1bb7acf302b5 Mon Sep 17 00:00:00 2001
From: Kumar Sanghvi <kumaras@chelsio.com>
Date: Tue, 18 Feb 2014 17:56:09 +0530
Subject: cxgb4: Print adapter VPD Part Number instead of Engineering Change
 field

When we attach to adapter, print VPD Part Number instead of Engineering Change field.
Based on original work by Casey Leedom <leedom@chelsio.com>

Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/chelsio/cxgb4/cxgb4.h      | 2 ++
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 4 ++--
 drivers/net/ethernet/chelsio/cxgb4/t4_hw.c      | 5 ++++-
 3 files changed, 8 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
index 0c4edd1db761..028b5e540130 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
@@ -66,6 +66,7 @@ enum {
 	SERNUM_LEN = 24,    /* Serial # length */
 	EC_LEN     = 16,    /* E/C length */
 	ID_LEN     = 16,    /* ID length */
+	PN_LEN     = 16,    /* Part Number length */
 };
 
 enum {
@@ -254,6 +255,7 @@ struct vpd_params {
 	u8 ec[EC_LEN + 1];
 	u8 sn[SERNUM_LEN + 1];
 	u8 id[ID_LEN + 1];
+	u8 pn[PN_LEN + 1];
 };
 
 struct pci_params {
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index 1da4adb013b3..809685d748f2 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -5839,8 +5839,8 @@ static void print_port_info(const struct net_device *dev)
 		    is_offload(adap) ? "R" : "", adap->params.pci.width, spd,
 		    (adap->flags & USING_MSIX) ? " MSI-X" :
 		    (adap->flags & USING_MSI) ? " MSI" : "");
-	netdev_info(dev, "S/N: %s, E/C: %s\n",
-		    adap->params.vpd.sn, adap->params.vpd.ec);
+	netdev_info(dev, "S/N: %s, P/N: %s\n",
+		    adap->params.vpd.sn, adap->params.vpd.pn);
 }
 
 static void enable_pcie_relaxed_ordering(struct pci_dev *dev)
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
index 514c525e99cf..7ae756defc95 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
@@ -573,7 +573,7 @@ int get_vpd_params(struct adapter *adapter, struct vpd_params *p)
 {
 	u32 cclk_param, cclk_val;
 	int i, ret, addr;
-	int ec, sn;
+	int ec, sn, pn;
 	u8 *vpd, csum;
 	unsigned int vpdr_len, kw_offset, id_len;
 
@@ -638,6 +638,7 @@ int get_vpd_params(struct adapter *adapter, struct vpd_params *p)
 
 	FIND_VPD_KW(ec, "EC");
 	FIND_VPD_KW(sn, "SN");
+	FIND_VPD_KW(pn, "PN");
 #undef FIND_VPD_KW
 
 	memcpy(p->id, vpd + PCI_VPD_LRDT_TAG_SIZE, id_len);
@@ -647,6 +648,8 @@ int get_vpd_params(struct adapter *adapter, struct vpd_params *p)
 	i = pci_vpd_info_field_size(vpd + sn - PCI_VPD_INFO_FLD_HDR_SIZE);
 	memcpy(p->sn, vpd + sn, min(i, SERNUM_LEN));
 	strim(p->sn);
+	memcpy(p->pn, vpd + pn, min(i, PN_LEN));
+	strim(p->pn);
 
 	/*
 	 * Ask firmware for the Core Clock since it knows how to translate the
-- 
cgit v1.2.2


From 57d8b7649d119e8ad6a976a196a21cb4e5e2714c Mon Sep 17 00:00:00 2001
From: Kumar Sanghvi <kumaras@chelsio.com>
Date: Tue, 18 Feb 2014 17:56:10 +0530
Subject: cxgb4: Allow >10G ports to have multiple queues

Based on original work by Divy Le Ray.

Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index 809685d748f2..9222a8a8eec7 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -5614,9 +5614,10 @@ static const struct pci_error_handlers cxgb4_eeh = {
 	.resume         = eeh_resume,
 };
 
-static inline bool is_10g_port(const struct link_config *lc)
+static inline bool is_x_10g_port(const struct link_config *lc)
 {
-	return (lc->supported & FW_PORT_CAP_SPEED_10G) != 0;
+	return (lc->supported & FW_PORT_CAP_SPEED_10G) != 0 ||
+	       (lc->supported & FW_PORT_CAP_SPEED_40G) != 0;
 }
 
 static inline void init_rspq(struct sge_rspq *q, u8 timer_idx, u8 pkt_cnt_idx,
@@ -5640,7 +5641,7 @@ static void cfg_queues(struct adapter *adap)
 	int i, q10g = 0, n10g = 0, qidx = 0;
 
 	for_each_port(adap, i)
-		n10g += is_10g_port(&adap2pinfo(adap, i)->link_cfg);
+		n10g += is_x_10g_port(&adap2pinfo(adap, i)->link_cfg);
 
 	/*
 	 * We default to 1 queue per non-10G port and up to # of cores queues
@@ -5655,7 +5656,7 @@ static void cfg_queues(struct adapter *adap)
 		struct port_info *pi = adap2pinfo(adap, i);
 
 		pi->first_qset = qidx;
-		pi->nqsets = is_10g_port(&pi->link_cfg) ? q10g : 1;
+		pi->nqsets = is_x_10g_port(&pi->link_cfg) ? q10g : 1;
 		qidx += pi->nqsets;
 	}
 
-- 
cgit v1.2.2


From 4fe44dd77602fef804561c46ad10b988ee2859ac Mon Sep 17 00:00:00 2001
From: Kumar Sanghvi <kumaras@chelsio.com>
Date: Tue, 18 Feb 2014 17:56:11 +0530
Subject: cxgb4: LE-Workaround is not atomic in firmware

The LE workaround in firmware is not atomic and fw_ofld_connection_wrs must not interleave.
Therefore, when the workaround is enabled, we need to send all ctrlq WRs on a single ctrl queue.

Based on original work by Santosh Rastapur <santosh@chelsio.com>

Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/chelsio/cxgb4/sge.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/chelsio/cxgb4/sge.c b/drivers/net/ethernet/chelsio/cxgb4/sge.c
index 47ffa64fcf19..23dbe28f8aca 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/sge.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/sge.c
@@ -1467,8 +1467,12 @@ static inline int ofld_send(struct adapter *adap, struct sk_buff *skb)
 {
 	unsigned int idx = skb_txq(skb);
 
-	if (unlikely(is_ctrl_pkt(skb)))
+	if (unlikely(is_ctrl_pkt(skb))) {
+		/* Single ctrl queue is a requirement for LE workaround path */
+		if (adap->tids.nsftids)
+			idx = 0;
 		return ctrl_xmit(&adap->sge.ctrlq[idx], skb);
+	}
 	return ofld_xmit(&adap->sge.ofldtxq[idx], skb);
 }
 
-- 
cgit v1.2.2


From 1ac0f095634a3e0494bc1d8c11a2c5972b80595f Mon Sep 17 00:00:00 2001
From: Kumar Sanghvi <kumaras@chelsio.com>
Date: Tue, 18 Feb 2014 17:56:12 +0530
Subject: cxgb4: Query firmware for T5 ULPTX MEMWRITE DSGL capabilities

Query firmware to see whether we're allowed to use T5 ULPTX MEMWRITE DSGL
capabilities.  Also pass that information to Upper Layer Drivers via the
new (struct cxgb4_lld_info).ulptx_memwrite_dsgl boolean.

Based on original work by Casey Leedom <leedom@chelsio.com>

Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/chelsio/cxgb4/cxgb4.h      |  1 +
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 16 ++++++++++++++++
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h  |  1 +
 drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h   |  1 +
 4 files changed, 19 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
index 028b5e540130..944f2cbc1795 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
@@ -308,6 +308,7 @@ struct adapter_params {
 	unsigned char bypass;
 
 	unsigned int ofldq_wr_cred;
+	bool ulptx_memwrite_dsgl;          /* use of T5 DSGL allowed */
 };
 
 #include "t4fw_api.h"
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index 9222a8a8eec7..aeeaa06a7a34 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -3776,6 +3776,7 @@ static void uld_attach(struct adapter *adap, unsigned int uld)
 	lli.dbfifo_int_thresh = dbfifo_int_thresh;
 	lli.sge_pktshift = adap->sge.pktshift;
 	lli.enable_fw_ofld_conn = adap->flags & FW_OFLD_CONN;
+	lli.ulptx_memwrite_dsgl = adap->params.ulptx_memwrite_dsgl;
 
 	handle = ulds[uld].add(&lli);
 	if (IS_ERR(handle)) {
@@ -5380,6 +5381,21 @@ static int adap_init0(struct adapter *adap)
 	val[0] = 1;
 	(void) t4_set_params(adap, adap->mbox, adap->fn, 0, 1, params, val);
 
+	/*
+	 * Find out whether we're allowed to use the T5+ ULPTX MEMWRITE DSGL
+	 * capability.  Earlier versions of the firmware didn't have the
+	 * ULPTX_MEMWRITE_DSGL so we'll interpret a query failure as no
+	 * permission to use ULPTX MEMWRITE DSGL.
+	 */
+	if (is_t4(adap->params.chip)) {
+		adap->params.ulptx_memwrite_dsgl = false;
+	} else {
+		params[0] = FW_PARAM_DEV(ULPTX_MEMWRITE_DSGL);
+		ret = t4_query_params(adap, adap->mbox, adap->fn, 0,
+				      1, params, val);
+		adap->params.ulptx_memwrite_dsgl = (ret == 0 && val[0] != 0);
+	}
+
 	/*
 	 * Get device capabilities so we can determine what resources we need
 	 * to manage.
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h
index 4dd0a82533e4..e274a047528f 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h
@@ -253,6 +253,7 @@ struct cxgb4_lld_info {
 					     /*	packet data */
 	bool enable_fw_ofld_conn;            /* Enable connection through fw */
 					     /* WR */
+	bool ulptx_memwrite_dsgl;            /* use of T5 DSGL allowed */
 };
 
 struct cxgb4_uld_info {
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h b/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h
index af6e12480e51..9cc973fbcf26 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h
@@ -932,6 +932,7 @@ enum fw_params_param_dev {
 	FW_PARAMS_PARAM_DEV_FWREV = 0x0B,
 	FW_PARAMS_PARAM_DEV_TPREV = 0x0C,
 	FW_PARAMS_PARAM_DEV_CF = 0x0D,
+	FW_PARAMS_PARAM_DEV_ULPTX_MEMWRITE_DSGL = 0x17,
 };
 
 /*
-- 
cgit v1.2.2


From c1f49e3e4adfba6eb953481d6731b2ee07085237 Mon Sep 17 00:00:00 2001
From: Kumar Sanghvi <kumaras@chelsio.com>
Date: Tue, 18 Feb 2014 17:56:13 +0530
Subject: cxgb4: Remove unused registers and add missing ones

Remove unused registers for registers list, and add missing ones
Based on original work by Santosh Rastapur <santosh@chelsio.com>

Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index aeeaa06a7a34..d431ad7a3db9 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -2064,7 +2064,7 @@ static void get_regs(struct net_device *dev, struct ethtool_regs *regs,
 		0x40200, 0x40298,
 		0x402ac, 0x4033c,
 		0x403f8, 0x403fc,
-		0x41300, 0x413c4,
+		0x41304, 0x413c4,
 		0x41400, 0x4141c,
 		0x41480, 0x414d0,
 		0x44000, 0x44078,
@@ -2092,7 +2092,7 @@ static void get_regs(struct net_device *dev, struct ethtool_regs *regs,
 		0x48200, 0x48298,
 		0x482ac, 0x4833c,
 		0x483f8, 0x483fc,
-		0x49300, 0x493c4,
+		0x49304, 0x493c4,
 		0x49400, 0x4941c,
 		0x49480, 0x494d0,
 		0x4c000, 0x4c078,
-- 
cgit v1.2.2


From 0034b2986ae44c72f8b784cf419e67f48e5304de Mon Sep 17 00:00:00 2001
From: Kumar Sanghvi <kumaras@chelsio.com>
Date: Tue, 18 Feb 2014 17:56:14 +0530
Subject: cxgb4: Don't assume LSO only uses SGL path in t4_eth_xmit()

Also, modify is_eth_imm() to return header length so it doesn't
have to be recomputed in calc_tx_flits().

Based on original work by Mike Werner <werner@chelsio.com>

Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/chelsio/cxgb4/sge.c | 32 ++++++++++++++++++++++----------
 1 file changed, 22 insertions(+), 10 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/chelsio/cxgb4/sge.c b/drivers/net/ethernet/chelsio/cxgb4/sge.c
index 23dbe28f8aca..af76b25bb606 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/sge.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/sge.c
@@ -706,11 +706,17 @@ static inline unsigned int flits_to_desc(unsigned int n)
  *	@skb: the packet
  *
  *	Returns whether an Ethernet packet is small enough to fit as
- *	immediate data.
+ *	immediate data. Return value corresponds to headroom required.
  */
 static inline int is_eth_imm(const struct sk_buff *skb)
 {
-	return skb->len <= MAX_IMM_TX_PKT_LEN - sizeof(struct cpl_tx_pkt);
+	int hdrlen = skb_shinfo(skb)->gso_size ?
+			sizeof(struct cpl_tx_pkt_lso_core) : 0;
+
+	hdrlen += sizeof(struct cpl_tx_pkt);
+	if (skb->len <= MAX_IMM_TX_PKT_LEN - hdrlen)
+		return hdrlen;
+	return 0;
 }
 
 /**
@@ -723,9 +729,10 @@ static inline int is_eth_imm(const struct sk_buff *skb)
 static inline unsigned int calc_tx_flits(const struct sk_buff *skb)
 {
 	unsigned int flits;
+	int hdrlen = is_eth_imm(skb);
 
-	if (is_eth_imm(skb))
-		return DIV_ROUND_UP(skb->len + sizeof(struct cpl_tx_pkt), 8);
+	if (hdrlen)
+		return DIV_ROUND_UP(skb->len + hdrlen, sizeof(__be64));
 
 	flits = sgl_len(skb_shinfo(skb)->nr_frags + 1) + 4;
 	if (skb_shinfo(skb)->gso_size)
@@ -971,6 +978,7 @@ static inline void txq_advance(struct sge_txq *q, unsigned int n)
  */
 netdev_tx_t t4_eth_xmit(struct sk_buff *skb, struct net_device *dev)
 {
+	int len;
 	u32 wr_mid;
 	u64 cntrl, *end;
 	int qidx, credits;
@@ -982,6 +990,7 @@ netdev_tx_t t4_eth_xmit(struct sk_buff *skb, struct net_device *dev)
 	struct cpl_tx_pkt_core *cpl;
 	const struct skb_shared_info *ssi;
 	dma_addr_t addr[MAX_SKB_FRAGS + 1];
+	bool immediate = false;
 
 	/*
 	 * The chip min packet length is 10 octets but play safe and reject
@@ -1011,7 +1020,10 @@ out_free:	dev_kfree_skb(skb);
 		return NETDEV_TX_BUSY;
 	}
 
-	if (!is_eth_imm(skb) &&
+	if (is_eth_imm(skb))
+		immediate = true;
+
+	if (!immediate &&
 	    unlikely(map_skb(adap->pdev_dev, skb, addr) < 0)) {
 		q->mapping_err++;
 		goto out_free;
@@ -1028,6 +1040,8 @@ out_free:	dev_kfree_skb(skb);
 	wr->r3 = cpu_to_be64(0);
 	end = (u64 *)wr + flits;
 
+	len = immediate ? skb->len : 0;
+	len += sizeof(*cpl);
 	ssi = skb_shinfo(skb);
 	if (ssi->gso_size) {
 		struct cpl_tx_pkt_lso *lso = (void *)wr;
@@ -1035,8 +1049,9 @@ out_free:	dev_kfree_skb(skb);
 		int l3hdr_len = skb_network_header_len(skb);
 		int eth_xtra_len = skb_network_offset(skb) - ETH_HLEN;
 
+		len += sizeof(*lso);
 		wr->op_immdlen = htonl(FW_WR_OP(FW_ETH_TX_PKT_WR) |
-				       FW_WR_IMMDLEN(sizeof(*lso)));
+				       FW_WR_IMMDLEN(len));
 		lso->c.lso_ctrl = htonl(LSO_OPCODE(CPL_TX_PKT_LSO) |
 					LSO_FIRST_SLICE | LSO_LAST_SLICE |
 					LSO_IPV6(v6) |
@@ -1054,9 +1069,6 @@ out_free:	dev_kfree_skb(skb);
 		q->tso++;
 		q->tx_cso += ssi->gso_segs;
 	} else {
-		int len;
-
-		len = is_eth_imm(skb) ? skb->len + sizeof(*cpl) : sizeof(*cpl);
 		wr->op_immdlen = htonl(FW_WR_OP(FW_ETH_TX_PKT_WR) |
 				       FW_WR_IMMDLEN(len));
 		cpl = (void *)(wr + 1);
@@ -1078,7 +1090,7 @@ out_free:	dev_kfree_skb(skb);
 	cpl->len = htons(skb->len);
 	cpl->ctrl1 = cpu_to_be64(cntrl);
 
-	if (is_eth_imm(skb)) {
+	if (immediate) {
 		inline_tx_skb(skb, &q->q, cpl + 1);
 		dev_kfree_skb(skb);
 	} else {
-- 
cgit v1.2.2


From f0a8e6dea0f6785e84673f5f9ddb620de5447aba Mon Sep 17 00:00:00 2001
From: Hariprasad Shenai <hariprasad@chelsio.com>
Date: Tue, 18 Feb 2014 17:56:15 +0530
Subject: cxgb4: Add more PCI device ids.

Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index d431ad7a3db9..4660f55e292b 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -254,6 +254,8 @@ static DEFINE_PCI_DEVICE_TABLE(cxgb4_pci_tbl) = {
 	CH_DEVICE(0x5011, 4),
 	CH_DEVICE(0x5012, 4),
 	CH_DEVICE(0x5013, 4),
+	CH_DEVICE(0x5014, 4),
+	CH_DEVICE(0x5015, 4),
 	CH_DEVICE(0x5401, 4),
 	CH_DEVICE(0x5402, 4),
 	CH_DEVICE(0x5403, 4),
@@ -273,6 +275,8 @@ static DEFINE_PCI_DEVICE_TABLE(cxgb4_pci_tbl) = {
 	CH_DEVICE(0x5411, 4),
 	CH_DEVICE(0x5412, 4),
 	CH_DEVICE(0x5413, 4),
+	CH_DEVICE(0x5414, 4),
+	CH_DEVICE(0x5415, 4),
 	{ 0, }
 };
 
-- 
cgit v1.2.2


From 4349968ad29a9023005e31eca5d971143d127ba8 Mon Sep 17 00:00:00 2001
From: hayeswang <hayeswang@realtek.com>
Date: Tue, 18 Feb 2014 21:48:58 +0800
Subject: r8152: move some functions

Move the following functions which is for the further coding.
 - rtl_clear_bp
 - r8153_clear_bp
 - r8153_teredo_off
 - r8152b_disable_aldps
 - r8152b_enable_aldps
 - r8152b_hw_phy_cfg

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/r8152.c | 106 ++++++++++++++++++++++++------------------------
 1 file changed, 53 insertions(+), 53 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index d89dbe395ad2..f042a85b84e9 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -1721,6 +1721,59 @@ static void rtl8152_disable(struct r8152 *tp)
 	rtl8152_nic_reset(tp);
 }
 
+static void rtl_clear_bp(struct r8152 *tp)
+{
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_0, 0);
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_2, 0);
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_4, 0);
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_6, 0);
+	ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_0, 0);
+	ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_2, 0);
+	ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_4, 0);
+	ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_6, 0);
+	mdelay(3);
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_BP_BA, 0);
+	ocp_write_word(tp, MCU_TYPE_USB, USB_BP_BA, 0);
+}
+
+static void r8153_clear_bp(struct r8152 *tp)
+{
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_BP_EN, 0);
+	ocp_write_byte(tp, MCU_TYPE_USB, USB_BP_EN, 0);
+	rtl_clear_bp(tp);
+}
+
+static void r8153_teredo_off(struct r8152 *tp)
+{
+	u32 ocp_data;
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG);
+	ocp_data &= ~(TEREDO_SEL | TEREDO_RS_EVENT_MASK | OOB_TEREDO_EN);
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG, ocp_data);
+
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_WDT6_CTRL, WDT6_SET_MODE);
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_REALWOW_TIMER, 0);
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TEREDO_TIMER, 0);
+}
+
+static void r8152b_disable_aldps(struct r8152 *tp)
+{
+	ocp_reg_write(tp, OCP_ALDPS_CONFIG, ENPDNPS | LINKENA | DIS_SDSAVE);
+	msleep(20);
+}
+
+static inline void r8152b_enable_aldps(struct r8152 *tp)
+{
+	ocp_reg_write(tp, OCP_ALDPS_CONFIG, ENPWRSAVE | ENPDNPS |
+					    LINKENA | DIS_SDSAVE);
+}
+
+static void r8152b_hw_phy_cfg(struct r8152 *tp)
+{
+	r8152_mdio_write(tp, MII_BMCR, BMCR_ANENABLE);
+	r8152b_disable_aldps(tp);
+}
+
 static void r8152b_exit_oob(struct r8152 *tp)
 {
 	u32	ocp_data;
@@ -1865,18 +1918,6 @@ static void r8152b_enter_oob(struct r8152 *tp)
 	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
 }
 
-static void r8152b_disable_aldps(struct r8152 *tp)
-{
-	ocp_reg_write(tp, OCP_ALDPS_CONFIG, ENPDNPS | LINKENA | DIS_SDSAVE);
-	msleep(20);
-}
-
-static inline void r8152b_enable_aldps(struct r8152 *tp)
-{
-	ocp_reg_write(tp, OCP_ALDPS_CONFIG, ENPWRSAVE | ENPDNPS |
-					    LINKENA | DIS_SDSAVE);
-}
-
 static void r8153_hw_phy_cfg(struct r8152 *tp)
 {
 	u32 ocp_data;
@@ -1961,19 +2002,6 @@ static void r8153_power_cut_en(struct r8152 *tp, int enable)
 	ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data);
 }
 
-static void r8153_teredo_off(struct r8152 *tp)
-{
-	u32 ocp_data;
-
-	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG);
-	ocp_data &= ~(TEREDO_SEL | TEREDO_RS_EVENT_MASK | OOB_TEREDO_EN);
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG, ocp_data);
-
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_WDT6_CTRL, WDT6_SET_MODE);
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_REALWOW_TIMER, 0);
-	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TEREDO_TIMER, 0);
-}
-
 static void r8153_first_init(struct r8152 *tp)
 {
 	u32 ocp_data;
@@ -2308,28 +2336,6 @@ static int rtl8152_close(struct net_device *netdev)
 	return res;
 }
 
-static void rtl_clear_bp(struct r8152 *tp)
-{
-	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_0, 0);
-	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_2, 0);
-	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_4, 0);
-	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_6, 0);
-	ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_0, 0);
-	ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_2, 0);
-	ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_4, 0);
-	ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_6, 0);
-	mdelay(3);
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_BP_BA, 0);
-	ocp_write_word(tp, MCU_TYPE_USB, USB_BP_BA, 0);
-}
-
-static void r8153_clear_bp(struct r8152 *tp)
-{
-	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_BP_EN, 0);
-	ocp_write_byte(tp, MCU_TYPE_USB, USB_BP_EN, 0);
-	rtl_clear_bp(tp);
-}
-
 static void r8152b_enable_eee(struct r8152 *tp)
 {
 	u32 ocp_data;
@@ -2378,12 +2384,6 @@ static void r8152b_enable_fc(struct r8152 *tp)
 	r8152_mdio_write(tp, MII_ADVERTISE, anar);
 }
 
-static void r8152b_hw_phy_cfg(struct r8152 *tp)
-{
-	r8152_mdio_write(tp, MII_BMCR, BMCR_ANENABLE);
-	r8152b_disable_aldps(tp);
-}
-
 static void r8152b_init(struct r8152 *tp)
 {
 	u32 ocp_data;
-- 
cgit v1.2.2


From 00a5e360c54ada2fbd58bacbb1c1fd79d2fde80d Mon Sep 17 00:00:00 2001
From: hayeswang <hayeswang@realtek.com>
Date: Tue, 18 Feb 2014 21:48:59 +0800
Subject: r8152: add three functions

Replace some codes with the following three functions.
 - rtl_drop_queued_tx
 - rxdy_gated_en
 - r8152_power_cut_en

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/r8152.c | 99 +++++++++++++++++++++++++------------------------
 1 file changed, 51 insertions(+), 48 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index f042a85b84e9..2d5e76159ca7 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -1478,6 +1478,17 @@ int r8152_submit_rx(struct r8152 *tp, struct rx_agg *agg, gfp_t mem_flags)
 	return usb_submit_urb(agg->urb, mem_flags);
 }
 
+static void rtl_drop_queued_tx(struct r8152 *tp)
+{
+	struct net_device_stats *stats = &tp->netdev->stats;
+	struct sk_buff *skb;
+
+	while ((skb = skb_dequeue(&tp->tx_queue))) {
+		dev_kfree_skb(skb);
+		stats->tx_dropped++;
+	}
+}
+
 static void rtl8152_tx_timeout(struct net_device *netdev)
 {
 	struct r8152 *tp = netdev_priv(netdev);
@@ -1613,6 +1624,18 @@ static void rtl_set_eee_plus(struct r8152 *tp)
 	}
 }
 
+static void rxdy_gated_en(struct r8152 *tp, bool enable)
+{
+	u32 ocp_data;
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1);
+	if (enable)
+		ocp_data |= RXDY_GATED_EN;
+	else
+		ocp_data &= ~RXDY_GATED_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data);
+}
+
 static int rtl_enable(struct r8152 *tp)
 {
 	u32 ocp_data;
@@ -1624,9 +1647,7 @@ static int rtl_enable(struct r8152 *tp)
 	ocp_data |= CR_RE | CR_TE;
 	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, ocp_data);
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1);
-	ocp_data &= ~RXDY_GATED_EN;
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data);
+	rxdy_gated_en(tp, false);
 
 	INIT_LIST_HEAD(&tp->rx_done);
 	ret = 0;
@@ -1681,8 +1702,6 @@ static int rtl8153_enable(struct r8152 *tp)
 
 static void rtl8152_disable(struct r8152 *tp)
 {
-	struct net_device_stats *stats = rtl8152_get_stats(tp->netdev);
-	struct sk_buff *skb;
 	u32 ocp_data;
 	int i;
 
@@ -1690,17 +1709,12 @@ static void rtl8152_disable(struct r8152 *tp)
 	ocp_data &= ~RCR_ACPT_ALL;
 	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
 
-	while ((skb = skb_dequeue(&tp->tx_queue))) {
-		dev_kfree_skb(skb);
-		stats->tx_dropped++;
-	}
+	rtl_drop_queued_tx(tp);
 
 	for (i = 0; i < RTL8152_MAX_TX; i++)
 		usb_kill_urb(tp->tx_info[i].urb);
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1);
-	ocp_data |= RXDY_GATED_EN;
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data);
+	rxdy_gated_en(tp, true);
 
 	for (i = 0; i < 1000; i++) {
 		ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
@@ -1721,6 +1735,23 @@ static void rtl8152_disable(struct r8152 *tp)
 	rtl8152_nic_reset(tp);
 }
 
+static void r8152_power_cut_en(struct r8152 *tp, bool enable)
+{
+	u32 ocp_data;
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_UPS_CTRL);
+	if (enable)
+		ocp_data |= POWER_CUT;
+	else
+		ocp_data &= ~POWER_CUT;
+	ocp_write_word(tp, MCU_TYPE_USB, USB_UPS_CTRL, ocp_data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS);
+	ocp_data &= ~RESUME_INDICATE;
+	ocp_write_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS, ocp_data);
+
+}
+
 static void rtl_clear_bp(struct r8152 *tp)
 {
 	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_0, 0);
@@ -1783,9 +1814,7 @@ static void r8152b_exit_oob(struct r8152 *tp)
 	ocp_data &= ~RCR_ACPT_ALL;
 	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1);
-	ocp_data |= RXDY_GATED_EN;
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data);
+	rxdy_gated_en(tp, true);
 
 	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
 	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, 0x00);
@@ -1909,9 +1938,7 @@ static void r8152b_enter_oob(struct r8152 *tp)
 
 	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CONFIG5, LAN_WAKE_EN);
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1);
-	ocp_data &= ~RXDY_GATED_EN;
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data);
+	rxdy_gated_en(tp, false);
 
 	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
 	ocp_data |= RCR_APM | RCR_AM | RCR_AB;
@@ -2007,10 +2034,7 @@ static void r8153_first_init(struct r8152 *tp)
 	u32 ocp_data;
 	int i;
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1);
-	ocp_data |= RXDY_GATED_EN;
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data);
-
+	rxdy_gated_en(tp, true);
 	r8153_teredo_off(tp);
 
 	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
@@ -2125,9 +2149,7 @@ static void r8153_enter_oob(struct r8152 *tp)
 
 	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CONFIG5, LAN_WAKE_EN);
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1);
-	ocp_data &= ~RXDY_GATED_EN;
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data);
+	rxdy_gated_en(tp, false);
 
 	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
 	ocp_data |= RCR_APM | RCR_AM | RCR_AB;
@@ -2231,12 +2253,7 @@ out:
 
 static void rtl8152_down(struct r8152 *tp)
 {
-	u32	ocp_data;
-
-	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_UPS_CTRL);
-	ocp_data &= ~POWER_CUT;
-	ocp_write_word(tp, MCU_TYPE_USB, USB_UPS_CTRL, ocp_data);
-
+	r8152_power_cut_en(tp, false);
 	r8152b_disable_aldps(tp);
 	r8152b_enter_oob(tp);
 	r8152b_enable_aldps(tp);
@@ -2399,13 +2416,8 @@ static void r8152b_init(struct r8152 *tp)
 
 	r8152b_hw_phy_cfg(tp);
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_UPS_CTRL);
-	ocp_data &= ~POWER_CUT;
-	ocp_write_word(tp, MCU_TYPE_USB, USB_UPS_CTRL, ocp_data);
+	r8152_power_cut_en(tp, false);
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS);
-	ocp_data &= ~RESUME_INDICATE;
-	ocp_write_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS, ocp_data);
 
 	r8152b_exit_oob(tp);
 
@@ -2659,17 +2671,8 @@ static void r8152b_get_version(struct r8152 *tp)
 
 static void rtl8152_unload(struct r8152 *tp)
 {
-	u32	ocp_data;
-
-	if (tp->version != RTL_VER_01) {
-		ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_UPS_CTRL);
-		ocp_data |= POWER_CUT;
-		ocp_write_word(tp, MCU_TYPE_USB, USB_UPS_CTRL, ocp_data);
-	}
-
-	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS);
-	ocp_data &= ~RESUME_INDICATE;
-	ocp_write_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS, ocp_data);
+	if (tp->version != RTL_VER_01)
+		r8152_power_cut_en(tp, true);
 }
 
 static void rtl8153_unload(struct r8152 *tp)
-- 
cgit v1.2.2


From b97027233db74a24eb3aca693ed3f85461c7f440 Mon Sep 17 00:00:00 2001
From: hayeswang <hayeswang@realtek.com>
Date: Tue, 18 Feb 2014 21:49:00 +0800
Subject: r8152: replace some types from int to bool

Modify the following functions.
 - r8153_u1u2en
 - r8153_u2p3en
 - r8153_power_cut_en

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/r8152.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 2d5e76159ca7..4888e4f4dd8f 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -1989,7 +1989,7 @@ static void r8153_hw_phy_cfg(struct r8152 *tp)
 	sram_write(tp, SRAM_10M_AMP2, data);
 }
 
-static void r8153_u1u2en(struct r8152 *tp, int enable)
+static void r8153_u1u2en(struct r8152 *tp, bool enable)
 {
 	u8 u1u2[8];
 
@@ -2001,7 +2001,7 @@ static void r8153_u1u2en(struct r8152 *tp, int enable)
 	usb_ocp_write(tp, USB_TOLERANCE, BYTE_EN_SIX_BYTES, sizeof(u1u2), u1u2);
 }
 
-static void r8153_u2p3en(struct r8152 *tp, int enable)
+static void r8153_u2p3en(struct r8152 *tp, bool enable)
 {
 	u32 ocp_data;
 
@@ -2013,7 +2013,7 @@ static void r8153_u2p3en(struct r8152 *tp, int enable)
 	ocp_write_word(tp, MCU_TYPE_USB, USB_U2P3_CTRL, ocp_data);
 }
 
-static void r8153_power_cut_en(struct r8152 *tp, int enable)
+static void r8153_power_cut_en(struct r8152 *tp, bool enable)
 {
 	u32 ocp_data;
 
@@ -2261,8 +2261,8 @@ static void rtl8152_down(struct r8152 *tp)
 
 static void rtl8153_down(struct r8152 *tp)
 {
-	r8153_u1u2en(tp, 0);
-	r8153_power_cut_en(tp, 0);
+	r8153_u1u2en(tp, false);
+	r8153_power_cut_en(tp, false);
 	r8153_disable_aldps(tp);
 	r8153_enter_oob(tp);
 	r8153_enable_aldps(tp);
@@ -2455,7 +2455,7 @@ static void r8153_init(struct r8152 *tp)
 	u32 ocp_data;
 	int i;
 
-	r8153_u1u2en(tp, 0);
+	r8153_u1u2en(tp, false);
 
 	for (i = 0; i < 500; i++) {
 		if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) &
@@ -2471,7 +2471,7 @@ static void r8153_init(struct r8152 *tp)
 		msleep(20);
 	}
 
-	r8153_u2p3en(tp, 0);
+	r8153_u2p3en(tp, false);
 
 	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_WDT11_CTRL);
 	ocp_data &= ~TIMER11_EN;
@@ -2496,8 +2496,8 @@ static void r8153_init(struct r8152 *tp)
 	ocp_data |= SEN_VAL_NORMAL | SEL_RXIDLE;
 	ocp_write_word(tp, MCU_TYPE_USB, USB_AFE_CTRL2, ocp_data);
 
-	r8153_power_cut_en(tp, 0);
-	r8153_u1u2en(tp, 1);
+	r8153_power_cut_en(tp, false);
+	r8153_u1u2en(tp, true);
 
 	r8153_first_init(tp);
 
@@ -2677,7 +2677,7 @@ static void rtl8152_unload(struct r8152 *tp)
 
 static void rtl8153_unload(struct r8152 *tp)
 {
-	r8153_power_cut_en(tp, 1);
+	r8153_power_cut_en(tp, true);
 }
 
 static int rtl_ops_init(struct r8152 *tp, const struct usb_device_id *id)
-- 
cgit v1.2.2


From 8a91c8246a847a2435a7ef361bfcd4c2b5be4ea2 Mon Sep 17 00:00:00 2001
From: hayeswang <hayeswang@realtek.com>
Date: Tue, 18 Feb 2014 21:49:01 +0800
Subject: r8152: load the default MAC address

Except for RTL_VER_01, replace loading the MAC address from PLA_IDR
with from PLA_BACKUP. The default MAC address may be modified by
the other OS, so the PLA_IDR may be not the default MAC address.

The data in the PLA_BACKUP address of the RTL_VER_01 may be destoryed,
so load MAC address from PLA_IDR for RTL_VER_01.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/r8152.c | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 4888e4f4dd8f..3847c3507624 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -889,11 +889,26 @@ int r8152_submit_rx(struct r8152 *tp, struct rx_agg *agg, gfp_t mem_flags);
 static inline void set_ethernet_addr(struct r8152 *tp)
 {
 	struct net_device *dev = tp->netdev;
+	int ret;
 	u8 node_id[8] = {0};
 
-	if (pla_ocp_read(tp, PLA_IDR, sizeof(node_id), node_id) < 0)
+	if (tp->version == RTL_VER_01)
+		ret = pla_ocp_read(tp, PLA_IDR, sizeof(node_id), node_id);
+	else
+		ret = pla_ocp_read(tp, PLA_BACKUP, sizeof(node_id), node_id);
+
+	if (ret < 0) {
 		netif_notice(tp, probe, dev, "inet addr fail\n");
-	else {
+	} else {
+		if (tp->version != RTL_VER_01) {
+			ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR,
+				       CRWECR_CONFIG);
+			pla_ocp_write(tp, PLA_IDR, BYTE_EN_SIX_BYTES,
+				      sizeof(node_id), node_id);
+			ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR,
+				       CRWECR_NORAML);
+		}
+
 		memcpy(dev->dev_addr, node_id, dev->addr_len);
 		memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
 	}
-- 
cgit v1.2.2


From d84130a10820d074fe52b066f459838324d3774c Mon Sep 17 00:00:00 2001
From: hayeswang <hayeswang@realtek.com>
Date: Tue, 18 Feb 2014 21:49:02 +0800
Subject: r8152: reduce the frequency of spin_lock

Replace getting one item from a list with getting the whole list one time.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/r8152.c | 47 ++++++++++++++++++++++++++++++++++++++---------
 1 file changed, 38 insertions(+), 9 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 3847c3507624..2a778faa9630 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -1299,9 +1299,16 @@ r8152_tx_csum(struct r8152 *tp, struct tx_desc *desc, struct sk_buff *skb)
 
 static int r8152_tx_agg_fill(struct r8152 *tp, struct tx_agg *agg)
 {
+	struct sk_buff_head skb_head, *tx_queue = &tp->tx_queue;
+	unsigned long flags;
 	int remain;
 	u8 *tx_data;
 
+	__skb_queue_head_init(&skb_head);
+	spin_lock_irqsave(&tx_queue->lock, flags);
+	skb_queue_splice_init(tx_queue, &skb_head);
+	spin_unlock_irqrestore(&tx_queue->lock, flags);
+
 	tx_data = agg->head;
 	agg->skb_num = agg->skb_len = 0;
 	remain = rx_buf_sz;
@@ -1311,14 +1318,14 @@ static int r8152_tx_agg_fill(struct r8152 *tp, struct tx_agg *agg)
 		struct sk_buff *skb;
 		unsigned int len;
 
-		skb = skb_dequeue(&tp->tx_queue);
+		skb = __skb_dequeue(&skb_head);
 		if (!skb)
 			break;
 
 		remain -= sizeof(*tx_desc);
 		len = skb->len;
 		if (remain < len) {
-			skb_queue_head(&tp->tx_queue, skb);
+			__skb_queue_head(&skb_head, skb);
 			break;
 		}
 
@@ -1336,6 +1343,12 @@ static int r8152_tx_agg_fill(struct r8152 *tp, struct tx_agg *agg)
 		remain = rx_buf_sz - (int)(tx_agg_align(tx_data) - agg->head);
 	}
 
+	if (!skb_queue_empty(&skb_head)) {
+		spin_lock_irqsave(&tx_queue->lock, flags);
+		skb_queue_splice(&skb_head, tx_queue);
+		spin_unlock_irqrestore(&tx_queue->lock, flags);
+	}
+
 	netif_tx_lock(tp->netdev);
 
 	if (netif_queue_stopped(tp->netdev) &&
@@ -1354,10 +1367,17 @@ static int r8152_tx_agg_fill(struct r8152 *tp, struct tx_agg *agg)
 static void rx_bottom(struct r8152 *tp)
 {
 	unsigned long flags;
-	struct list_head *cursor, *next;
+	struct list_head *cursor, *next, rx_queue;
 
+	if (list_empty(&tp->rx_done))
+		return;
+
+	INIT_LIST_HEAD(&rx_queue);
 	spin_lock_irqsave(&tp->rx_lock, flags);
-	list_for_each_safe(cursor, next, &tp->rx_done) {
+	list_splice_init(&tp->rx_done, &rx_queue);
+	spin_unlock_irqrestore(&tp->rx_lock, flags);
+
+	list_for_each_safe(cursor, next, &rx_queue) {
 		struct rx_desc *rx_desc;
 		struct rx_agg *agg;
 		int len_used = 0;
@@ -1366,7 +1386,6 @@ static void rx_bottom(struct r8152 *tp)
 		int ret;
 
 		list_del_init(cursor);
-		spin_unlock_irqrestore(&tp->rx_lock, flags);
 
 		agg = list_entry(cursor, struct rx_agg, list);
 		urb = agg->urb;
@@ -1416,13 +1435,13 @@ static void rx_bottom(struct r8152 *tp)
 
 submit:
 		ret = r8152_submit_rx(tp, agg, GFP_ATOMIC);
-		spin_lock_irqsave(&tp->rx_lock, flags);
 		if (ret && ret != -ENODEV) {
-			list_add_tail(&agg->list, next);
+			spin_lock_irqsave(&tp->rx_lock, flags);
+			list_add_tail(&agg->list, &tp->rx_done);
+			spin_unlock_irqrestore(&tp->rx_lock, flags);
 			tasklet_schedule(&tp->tl);
 		}
 	}
-	spin_unlock_irqrestore(&tp->rx_lock, flags);
 }
 
 static void tx_bottom(struct r8152 *tp)
@@ -1496,9 +1515,19 @@ int r8152_submit_rx(struct r8152 *tp, struct rx_agg *agg, gfp_t mem_flags)
 static void rtl_drop_queued_tx(struct r8152 *tp)
 {
 	struct net_device_stats *stats = &tp->netdev->stats;
+	struct sk_buff_head skb_head, *tx_queue = &tp->tx_queue;
+	unsigned long flags;
 	struct sk_buff *skb;
 
-	while ((skb = skb_dequeue(&tp->tx_queue))) {
+	if (skb_queue_empty(tx_queue))
+		return;
+
+	__skb_queue_head_init(&skb_head);
+	spin_lock_irqsave(&tx_queue->lock, flags);
+	skb_queue_splice_init(tx_queue, &skb_head);
+	spin_unlock_irqrestore(&tx_queue->lock, flags);
+
+	while ((skb = __skb_dequeue(&skb_head))) {
 		dev_kfree_skb(skb);
 		stats->tx_dropped++;
 	}
-- 
cgit v1.2.2


From f0cbe0ac87c123a80dac3b2df72ecb947ef63ad8 Mon Sep 17 00:00:00 2001
From: hayeswang <hayeswang@realtek.com>
Date: Tue, 18 Feb 2014 21:49:03 +0800
Subject: r8152: clear BMCR_PDOWN

Modify the method of enabling the PHY to clear BMCR_PDOWN only.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/r8152.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 2a778faa9630..c7bae3920038 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -1845,7 +1845,14 @@ static inline void r8152b_enable_aldps(struct r8152 *tp)
 
 static void r8152b_hw_phy_cfg(struct r8152 *tp)
 {
-	r8152_mdio_write(tp, MII_BMCR, BMCR_ANENABLE);
+	u16 data;
+
+	data = r8152_mdio_read(tp, MII_BMCR);
+	if (data & BMCR_PDOWN) {
+		data &= ~BMCR_PDOWN;
+		r8152_mdio_write(tp, MII_BMCR, data);
+	}
+
 	r8152b_disable_aldps(tp);
 }
 
@@ -1995,7 +2002,11 @@ static void r8153_hw_phy_cfg(struct r8152 *tp)
 	u16 data;
 
 	ocp_reg_write(tp, OCP_ADC_CFG, CKADSEL_L | ADC_EN | EN_EMI_L);
-	r8152_mdio_write(tp, MII_BMCR, BMCR_ANENABLE);
+	data = r8152_mdio_read(tp, MII_BMCR);
+	if (data & BMCR_PDOWN) {
+		data &= ~BMCR_PDOWN;
+		r8152_mdio_write(tp, MII_BMCR, data);
+	}
 
 	if (tp->version == RTL_VER_03) {
 		data = ocp_reg_read(tp, OCP_EEE_CFG);
-- 
cgit v1.2.2


From aa66a5f1af163b6c90fca5a06c7fdab121b70cd2 Mon Sep 17 00:00:00 2001
From: hayeswang <hayeswang@realtek.com>
Date: Tue, 18 Feb 2014 21:49:04 +0800
Subject: r8152: combine PHY reset with set_speed

PHY reset is necessary after some hw settings. However, it would
cause the linking down, and so does the set_speed function. Combine
the PHY reset with set_speed function. That could reduce the frequency
of linking down and accessing the PHY register.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/r8152.c | 57 ++++++++++++++++++++++++++++++++++++++-----------
 1 file changed, 45 insertions(+), 12 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index c7bae3920038..b3155da97f09 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -436,6 +436,7 @@ enum rtl8152_flags {
 	RTL8152_SET_RX_MODE,
 	WORK_ENABLE,
 	RTL8152_LINK_CHG,
+	PHY_RESET,
 };
 
 /* Define these values to match your device */
@@ -1796,6 +1797,29 @@ static void r8152_power_cut_en(struct r8152 *tp, bool enable)
 
 }
 
+static void rtl_phy_reset(struct r8152 *tp)
+{
+	u16 data;
+	int i;
+
+	clear_bit(PHY_RESET, &tp->flags);
+
+	data = r8152_mdio_read(tp, MII_BMCR);
+
+	/* don't reset again before the previous one complete */
+	if (data & BMCR_RESET)
+		return;
+
+	data |= BMCR_RESET;
+	r8152_mdio_write(tp, MII_BMCR, data);
+
+	for (i = 0; i < 50; i++) {
+		msleep(20);
+		if ((r8152_mdio_read(tp, MII_BMCR) & BMCR_RESET) == 0)
+			break;
+	}
+}
+
 static void rtl_clear_bp(struct r8152 *tp)
 {
 	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_0, 0);
@@ -1854,6 +1878,7 @@ static void r8152b_hw_phy_cfg(struct r8152 *tp)
 	}
 
 	r8152b_disable_aldps(tp);
+	set_bit(PHY_RESET, &tp->flags);
 }
 
 static void r8152b_exit_oob(struct r8152 *tp)
@@ -2042,6 +2067,8 @@ static void r8153_hw_phy_cfg(struct r8152 *tp)
 	data = sram_read(tp, SRAM_10M_AMP2);
 	data |= AMP_DN;
 	sram_write(tp, SRAM_10M_AMP2, data);
+
+	set_bit(PHY_RESET, &tp->flags);
 }
 
 static void r8153_u1u2en(struct r8152 *tp, bool enable)
@@ -2295,12 +2322,26 @@ static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u16 speed, u8 duplex)
 		bmcr = BMCR_ANENABLE | BMCR_ANRESTART;
 	}
 
+	if (test_bit(PHY_RESET, &tp->flags))
+		bmcr |= BMCR_RESET;
+
 	if (tp->mii.supports_gmii)
 		r8152_mdio_write(tp, MII_CTRL1000, gbcr);
 
 	r8152_mdio_write(tp, MII_ADVERTISE, anar);
 	r8152_mdio_write(tp, MII_BMCR, bmcr);
 
+	if (test_bit(PHY_RESET, &tp->flags)) {
+		int i;
+
+		clear_bit(PHY_RESET, &tp->flags);
+		for (i = 0; i < 50; i++) {
+			msleep(20);
+			if ((r8152_mdio_read(tp, MII_BMCR) & BMCR_RESET) == 0)
+				break;
+		}
+	}
+
 out:
 
 	return ret;
@@ -2364,6 +2405,10 @@ static void rtl_work_func_t(struct work_struct *work)
 	if (test_bit(RTL8152_SET_RX_MODE, &tp->flags))
 		_rtl8152_set_rx_mode(tp->netdev);
 
+
+	if (test_bit(PHY_RESET, &tp->flags))
+		rtl_phy_reset(tp);
+
 out1:
 	return;
 }
@@ -2459,7 +2504,6 @@ static void r8152b_enable_fc(struct r8152 *tp)
 static void r8152b_init(struct r8152 *tp)
 {
 	u32 ocp_data;
-	int i;
 
 	rtl_clear_bp(tp);
 
@@ -2491,14 +2535,6 @@ static void r8152b_init(struct r8152 *tp)
 	r8152b_enable_aldps(tp);
 	r8152b_enable_fc(tp);
 
-	r8152_mdio_write(tp, MII_BMCR, BMCR_RESET | BMCR_ANENABLE |
-				       BMCR_ANRESTART);
-	for (i = 0; i < 100; i++) {
-		udelay(100);
-		if (!(r8152_mdio_read(tp, MII_BMCR) & BMCR_RESET))
-			break;
-	}
-
 	/* enable rx aggregation */
 	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
 	ocp_data &= ~RX_AGG_DISABLE;
@@ -2569,9 +2605,6 @@ static void r8153_init(struct r8152 *tp)
 	r8153_enable_eee(tp);
 	r8153_enable_aldps(tp);
 	r8152b_enable_fc(tp);
-
-	r8152_mdio_write(tp, MII_BMCR, BMCR_RESET | BMCR_ANENABLE |
-				       BMCR_ANRESTART);
 }
 
 static int rtl8152_suspend(struct usb_interface *intf, pm_message_t message)
-- 
cgit v1.2.2


From 7e9da48161506bb24d6072be9dfcd62ac8d95b88 Mon Sep 17 00:00:00 2001
From: hayeswang <hayeswang@realtek.com>
Date: Tue, 18 Feb 2014 21:49:05 +0800
Subject: r8152: move some functions from probe to open

Add up method for rtl_ops and asign relative functions. Move
clear_bp() and hw_phy_cfg() from init method to up method of rtl_ops.
Call rtl_ops.up() for ndo_open() and rtl_ops.down for ndo_stop().

Replace allocating the memory in probe() with in ndo_open().

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/r8152.c | 45 +++++++++++++++++++++++++--------------------
 1 file changed, 25 insertions(+), 20 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index b3155da97f09..828572a5b24a 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -515,6 +515,7 @@ struct r8152 {
 		void (*init)(struct r8152 *);
 		int (*enable)(struct r8152 *);
 		void (*disable)(struct r8152 *);
+		void (*up)(struct r8152 *);
 		void (*down)(struct r8152 *);
 		void (*unload)(struct r8152 *);
 	} rtl_ops;
@@ -1878,6 +1879,10 @@ static void r8152b_hw_phy_cfg(struct r8152 *tp)
 	}
 
 	r8152b_disable_aldps(tp);
+
+	rtl_clear_bp(tp);
+
+	r8152b_enable_aldps(tp);
 	set_bit(PHY_RESET, &tp->flags);
 }
 
@@ -1891,6 +1896,7 @@ static void r8152b_exit_oob(struct r8152 *tp)
 	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
 
 	rxdy_gated_en(tp, true);
+	r8152b_hw_phy_cfg(tp);
 
 	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
 	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, 0x00);
@@ -2033,6 +2039,8 @@ static void r8153_hw_phy_cfg(struct r8152 *tp)
 		r8152_mdio_write(tp, MII_BMCR, data);
 	}
 
+	r8153_clear_bp(tp);
+
 	if (tp->version == RTL_VER_03) {
 		data = ocp_reg_read(tp, OCP_EEE_CFG);
 		data &= ~CTAP_SHORT_EN;
@@ -2418,6 +2426,12 @@ static int rtl8152_open(struct net_device *netdev)
 	struct r8152 *tp = netdev_priv(netdev);
 	int res = 0;
 
+	res = alloc_all_mem(tp);
+	if (res)
+		goto out;
+
+	tp->rtl_ops.up(tp);
+
 	rtl8152_set_speed(tp, AUTONEG_ENABLE,
 			  tp->mii.supports_gmii ? SPEED_1000 : SPEED_100,
 			  DUPLEX_FULL);
@@ -2431,9 +2445,11 @@ static int rtl8152_open(struct net_device *netdev)
 			netif_device_detach(tp->netdev);
 		netif_warn(tp, ifup, netdev, "intr_urb submit failed: %d\n",
 			   res);
+		free_all_mem(tp);
 	}
 
 
+out:
 	return res;
 }
 
@@ -2447,9 +2463,11 @@ static int rtl8152_close(struct net_device *netdev)
 	cancel_delayed_work_sync(&tp->schedule);
 	netif_stop_queue(netdev);
 	tasklet_disable(&tp->tl);
-	tp->rtl_ops.disable(tp);
+	tp->rtl_ops.down(tp);
 	tasklet_enable(&tp->tl);
 
+	free_all_mem(tp);
+
 	return res;
 }
 
@@ -2505,21 +2523,14 @@ static void r8152b_init(struct r8152 *tp)
 {
 	u32 ocp_data;
 
-	rtl_clear_bp(tp);
-
 	if (tp->version == RTL_VER_01) {
 		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE);
 		ocp_data &= ~LED_MODE_MASK;
 		ocp_write_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE, ocp_data);
 	}
 
-	r8152b_hw_phy_cfg(tp);
-
 	r8152_power_cut_en(tp, false);
 
-
-	r8152b_exit_oob(tp);
-
 	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR);
 	ocp_data |= TX_10M_IDLE_EN | PFM_PWM_SWITCH;
 	ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data);
@@ -2568,8 +2579,6 @@ static void r8153_init(struct r8152 *tp)
 	ocp_data &= ~TIMER11_EN;
 	ocp_write_word(tp, MCU_TYPE_USB, USB_WDT11_CTRL, ocp_data);
 
-	r8153_clear_bp(tp);
-
 	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE);
 	ocp_data &= ~LED_MODE_MASK;
 	ocp_write_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE, ocp_data);
@@ -2590,8 +2599,6 @@ static void r8153_init(struct r8152 *tp)
 	r8153_power_cut_en(tp, false);
 	r8153_u1u2en(tp, true);
 
-	r8153_first_init(tp);
-
 	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL, ALDPS_SPDWN_RATIO);
 	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, EEE_SPDWN_RATIO);
 	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3,
@@ -2618,10 +2625,10 @@ static int rtl8152_suspend(struct usb_interface *intf, pm_message_t message)
 		usb_kill_urb(tp->intr_urb);
 		cancel_delayed_work_sync(&tp->schedule);
 		tasklet_disable(&tp->tl);
+		tp->rtl_ops.down(tp);
+		tasklet_enable(&tp->tl);
 	}
 
-	tp->rtl_ops.down(tp);
-
 	return 0;
 }
 
@@ -2632,6 +2639,7 @@ static int rtl8152_resume(struct usb_interface *intf)
 	tp->rtl_ops.init(tp);
 	netif_device_attach(tp->netdev);
 	if (netif_running(tp->netdev)) {
+		tp->rtl_ops.up(tp);
 		rtl8152_set_speed(tp, AUTONEG_ENABLE,
 				tp->mii.supports_gmii ? SPEED_1000 : SPEED_100,
 				DUPLEX_FULL);
@@ -2639,7 +2647,6 @@ static int rtl8152_resume(struct usb_interface *intf)
 		netif_carrier_off(tp->netdev);
 		set_bit(WORK_ENABLE, &tp->flags);
 		usb_submit_urb(tp->intr_urb, GFP_KERNEL);
-		tasklet_enable(&tp->tl);
 	}
 
 	return 0;
@@ -2780,6 +2787,7 @@ static int rtl_ops_init(struct r8152 *tp, const struct usb_device_id *id)
 			ops->init		= r8152b_init;
 			ops->enable		= rtl8152_enable;
 			ops->disable		= rtl8152_disable;
+			ops->up			= r8152b_exit_oob;
 			ops->down		= rtl8152_down;
 			ops->unload		= rtl8152_unload;
 			ret = 0;
@@ -2788,6 +2796,7 @@ static int rtl_ops_init(struct r8152 *tp, const struct usb_device_id *id)
 			ops->init		= r8153_init;
 			ops->enable		= rtl8153_enable;
 			ops->disable		= rtl8152_disable;
+			ops->up			= r8153_first_init;
 			ops->down		= rtl8153_down;
 			ops->unload		= rtl8153_unload;
 			ret = 0;
@@ -2803,6 +2812,7 @@ static int rtl_ops_init(struct r8152 *tp, const struct usb_device_id *id)
 			ops->init		= r8153_init;
 			ops->enable		= rtl8153_enable;
 			ops->disable		= rtl8152_disable;
+			ops->up			= r8153_first_init;
 			ops->down		= rtl8153_down;
 			ops->unload		= rtl8153_unload;
 			ret = 0;
@@ -2870,10 +2880,6 @@ static int rtl8152_probe(struct usb_interface *intf,
 	tp->rtl_ops.init(tp);
 	set_ethernet_addr(tp);
 
-	ret = alloc_all_mem(tp);
-	if (ret)
-		goto out;
-
 	usb_set_intfdata(intf, tp);
 
 	ret = register_netdev(netdev);
@@ -2903,7 +2909,6 @@ static void rtl8152_disconnect(struct usb_interface *intf)
 		tasklet_kill(&tp->tl);
 		unregister_netdev(tp->netdev);
 		tp->rtl_ops.unload(tp);
-		free_all_mem(tp);
 		free_netdev(tp->netdev);
 	}
 }
-- 
cgit v1.2.2


From 21ff2e8976b1be23eb0125ee83eb807ad40fb226 Mon Sep 17 00:00:00 2001
From: hayeswang <hayeswang@realtek.com>
Date: Tue, 18 Feb 2014 21:49:06 +0800
Subject: r8152: support WOL

Support WOL for RTL8152 and RTL8153.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/r8152.c | 118 ++++++++++++++++++++++++++++++++++++++++++------
 1 file changed, 105 insertions(+), 13 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 828572a5b24a..5d520bee6c0c 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -23,7 +23,7 @@
 #include <linux/ipv6.h>
 
 /* Version Information */
-#define DRIVER_VERSION "v1.04.0 (2014/01/15)"
+#define DRIVER_VERSION "v1.05.0 (2014/02/18)"
 #define DRIVER_AUTHOR "Realtek linux nic maintainers <nic_swsd@realtek.com>"
 #define DRIVER_DESC "Realtek RTL8152/RTL8153 Based USB Ethernet Adapters"
 #define MODULENAME "r8152"
@@ -62,6 +62,8 @@
 #define PLA_RSTTELLY		0xe800
 #define PLA_CR			0xe813
 #define PLA_CRWECR		0xe81c
+#define PLA_CONFIG12		0xe81e	/* CONFIG1, CONFIG2 */
+#define PLA_CONFIG34		0xe820	/* CONFIG3, CONFIG4 */
 #define PLA_CONFIG5		0xe822
 #define PLA_PHY_PWR		0xe84c
 #define PLA_OOB_CTRL		0xe84f
@@ -216,7 +218,14 @@
 /* PAL_BDC_CR */
 #define ALDPS_PROXY_MODE	0x0001
 
+/* PLA_CONFIG34 */
+#define LINK_ON_WAKE_EN		0x0010
+#define LINK_OFF_WAKE_EN	0x0008
+
 /* PLA_CONFIG5 */
+#define BWF_EN			0x0040
+#define MWF_EN			0x0020
+#define UWF_EN			0x0010
 #define LAN_WAKE_EN		0x0002
 
 /* PLA_LED_FEATURE */
@@ -521,6 +530,7 @@ struct r8152 {
 	} rtl_ops;
 
 	int intr_interval;
+	u32 saved_wolopts;
 	u32 msg_enable;
 	u32 tx_qlen;
 	u16 ocp_base;
@@ -1798,6 +1808,74 @@ static void r8152_power_cut_en(struct r8152 *tp, bool enable)
 
 }
 
+#define WAKE_ANY (WAKE_PHY | WAKE_MAGIC | WAKE_UCAST | WAKE_BCAST | WAKE_MCAST)
+
+static u32 __rtl_get_wol(struct r8152 *tp)
+{
+	u32 ocp_data;
+	u32 wolopts = 0;
+
+	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CONFIG5);
+	if (!(ocp_data & LAN_WAKE_EN))
+		return 0;
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG34);
+	if (ocp_data & LINK_ON_WAKE_EN)
+		wolopts |= WAKE_PHY;
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG5);
+	if (ocp_data & UWF_EN)
+		wolopts |= WAKE_UCAST;
+	if (ocp_data & BWF_EN)
+		wolopts |= WAKE_BCAST;
+	if (ocp_data & MWF_EN)
+		wolopts |= WAKE_MCAST;
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CFG_WOL);
+	if (ocp_data & MAGIC_EN)
+		wolopts |= WAKE_MAGIC;
+
+	return wolopts;
+}
+
+static void __rtl_set_wol(struct r8152 *tp, u32 wolopts)
+{
+	u32 ocp_data;
+
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG34);
+	ocp_data &= ~LINK_ON_WAKE_EN;
+	if (wolopts & WAKE_PHY)
+		ocp_data |= LINK_ON_WAKE_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG34, ocp_data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG5);
+	ocp_data &= ~(UWF_EN | BWF_EN | MWF_EN | LAN_WAKE_EN);
+	if (wolopts & WAKE_UCAST)
+		ocp_data |= UWF_EN;
+	if (wolopts & WAKE_BCAST)
+		ocp_data |= BWF_EN;
+	if (wolopts & WAKE_MCAST)
+		ocp_data |= MWF_EN;
+	if (wolopts & WAKE_ANY)
+		ocp_data |= LAN_WAKE_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG5, ocp_data);
+
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CFG_WOL);
+	ocp_data &= ~MAGIC_EN;
+	if (wolopts & WAKE_MAGIC)
+		ocp_data |= MAGIC_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_CFG_WOL, ocp_data);
+
+	if (wolopts & WAKE_ANY)
+		device_set_wakeup_enable(&tp->udev->dev, true);
+	else
+		device_set_wakeup_enable(&tp->udev->dev, false);
+}
+
 static void rtl_phy_reset(struct r8152 *tp)
 {
 	u16 data;
@@ -2002,10 +2080,6 @@ static void r8152b_enter_oob(struct r8152 *tp)
 
 	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, RTL8152_RMS);
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CFG_WOL);
-	ocp_data |= MAGIC_EN;
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_CFG_WOL, ocp_data);
-
 	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CPCR);
 	ocp_data |= CPCR_RX_VLAN;
 	ocp_write_word(tp, MCU_TYPE_PLA, PLA_CPCR, ocp_data);
@@ -2018,8 +2092,6 @@ static void r8152b_enter_oob(struct r8152 *tp)
 	ocp_data |= NOW_IS_OOB | DIS_MCU_CLROOB;
 	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
 
-	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CONFIG5, LAN_WAKE_EN);
-
 	rxdy_gated_en(tp, false);
 
 	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
@@ -2217,10 +2289,6 @@ static void r8153_enter_oob(struct r8152 *tp)
 
 	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, RTL8152_RMS);
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CFG_WOL);
-	ocp_data |= MAGIC_EN;
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_CFG_WOL, ocp_data);
-
 	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG);
 	ocp_data &= ~TEREDO_WAKE_MASK;
 	ocp_write_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG, ocp_data);
@@ -2237,8 +2305,6 @@ static void r8153_enter_oob(struct r8152 *tp)
 	ocp_data |= NOW_IS_OOB | DIS_MCU_CLROOB;
 	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
 
-	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CONFIG5, LAN_WAKE_EN);
-
 	rxdy_gated_en(tp, false);
 
 	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
@@ -2652,6 +2718,24 @@ static int rtl8152_resume(struct usb_interface *intf)
 	return 0;
 }
 
+static void rtl8152_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+	struct r8152 *tp = netdev_priv(dev);
+
+	wol->supported = WAKE_ANY;
+	wol->wolopts = __rtl_get_wol(tp);
+}
+
+static int rtl8152_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+	struct r8152 *tp = netdev_priv(dev);
+
+	__rtl_set_wol(tp, wol->wolopts);
+	tp->saved_wolopts = wol->wolopts & WAKE_ANY;
+
+	return 0;
+}
+
 static void rtl8152_get_drvinfo(struct net_device *netdev,
 				struct ethtool_drvinfo *info)
 {
@@ -2685,6 +2769,8 @@ static struct ethtool_ops ops = {
 	.get_settings = rtl8152_get_settings,
 	.set_settings = rtl8152_set_settings,
 	.get_link = ethtool_op_get_link,
+	.get_wol = rtl8152_get_wol,
+	.set_wol = rtl8152_set_wol,
 };
 
 static int rtl8152_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
@@ -2888,6 +2974,12 @@ static int rtl8152_probe(struct usb_interface *intf,
 		goto out1;
 	}
 
+	tp->saved_wolopts = __rtl_get_wol(tp);
+	if (tp->saved_wolopts)
+		device_set_wakeup_enable(&udev->dev, true);
+	else
+		device_set_wakeup_enable(&udev->dev, false);
+
 	netif_info(tp, probe, netdev, "%s\n", DRIVER_VERSION);
 
 	return 0;
-- 
cgit v1.2.2


From 9a4be1bd04d6df0cb1a1a0fe49430b27152bb98f Mon Sep 17 00:00:00 2001
From: hayeswang <hayeswang@realtek.com>
Date: Tue, 18 Feb 2014 21:49:07 +0800
Subject: r8152: support runtime suspend

Support runtime suspend for RTL8152 and RTL8153.

Move tx_bottom() from tasklet to delayed_work. That avoids to
transmit tx packets after calling autosuspend.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/r8152.c | 181 ++++++++++++++++++++++++++++++++++++++++++------
 1 file changed, 158 insertions(+), 23 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 5d520bee6c0c..f303549b416a 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -445,6 +445,7 @@ enum rtl8152_flags {
 	RTL8152_SET_RX_MODE,
 	WORK_ENABLE,
 	RTL8152_LINK_CHG,
+	SELECTIVE_SUSPEND,
 	PHY_RESET,
 };
 
@@ -877,11 +878,21 @@ static u16 sram_read(struct r8152 *tp, u16 addr)
 static int read_mii_word(struct net_device *netdev, int phy_id, int reg)
 {
 	struct r8152 *tp = netdev_priv(netdev);
+	int ret;
 
 	if (phy_id != R8152_PHY_ID)
 		return -EINVAL;
 
-	return r8152_mdio_read(tp, reg);
+	ret = usb_autopm_get_interface(tp->intf);
+	if (ret < 0)
+		goto out;
+
+	ret = r8152_mdio_read(tp, reg);
+
+	usb_autopm_put_interface(tp->intf);
+
+out:
+	return ret;
 }
 
 static
@@ -892,7 +903,12 @@ void write_mii_word(struct net_device *netdev, int phy_id, int reg, int val)
 	if (phy_id != R8152_PHY_ID)
 		return;
 
+	if (usb_autopm_get_interface(tp->intf) < 0)
+		return;
+
 	r8152_mdio_write(tp, reg, val);
+
+	usb_autopm_put_interface(tp->intf);
 }
 
 static
@@ -978,6 +994,8 @@ static void read_bulk_callback(struct urb *urb)
 	if (!netif_carrier_ok(netdev))
 		return;
 
+	usb_mark_last_busy(tp->udev);
+
 	switch (status) {
 	case 0:
 		if (urb->actual_length < ETH_ZLEN)
@@ -1045,6 +1063,8 @@ static void write_bulk_callback(struct urb *urb)
 	list_add_tail(&agg->list, &tp->tx_free);
 	spin_unlock_irqrestore(&tp->tx_lock, flags);
 
+	usb_autopm_put_interface_async(tp->intf);
+
 	if (!netif_carrier_ok(tp->netdev))
 		return;
 
@@ -1055,7 +1075,7 @@ static void write_bulk_callback(struct urb *urb)
 		return;
 
 	if (!skb_queue_empty(&tp->tx_queue))
-		tasklet_schedule(&tp->tl);
+		schedule_delayed_work(&tp->schedule, 0);
 }
 
 static void intr_callback(struct urb *urb)
@@ -1313,7 +1333,7 @@ static int r8152_tx_agg_fill(struct r8152 *tp, struct tx_agg *agg)
 {
 	struct sk_buff_head skb_head, *tx_queue = &tp->tx_queue;
 	unsigned long flags;
-	int remain;
+	int remain, ret;
 	u8 *tx_data;
 
 	__skb_queue_head_init(&skb_head);
@@ -1361,19 +1381,28 @@ static int r8152_tx_agg_fill(struct r8152 *tp, struct tx_agg *agg)
 		spin_unlock_irqrestore(&tx_queue->lock, flags);
 	}
 
-	netif_tx_lock(tp->netdev);
+	netif_tx_lock_bh(tp->netdev);
 
 	if (netif_queue_stopped(tp->netdev) &&
 	    skb_queue_len(&tp->tx_queue) < tp->tx_qlen)
 		netif_wake_queue(tp->netdev);
 
-	netif_tx_unlock(tp->netdev);
+	netif_tx_unlock_bh(tp->netdev);
+
+	ret = usb_autopm_get_interface(tp->intf);
+	if (ret < 0)
+		goto out_tx_fill;
 
 	usb_fill_bulk_urb(agg->urb, tp->udev, usb_sndbulkpipe(tp->udev, 2),
 			  agg->head, (int)(tx_data - (u8 *)agg->head),
 			  (usb_complete_t)write_bulk_callback, agg);
 
-	return usb_submit_urb(agg->urb, GFP_ATOMIC);
+	ret = usb_submit_urb(agg->urb, GFP_KERNEL);
+	if (ret < 0)
+		usb_autopm_put_interface(tp->intf);
+
+out_tx_fill:
+	return ret;
 }
 
 static void rx_bottom(struct r8152 *tp)
@@ -1511,7 +1540,6 @@ static void bottom_half(unsigned long data)
 		return;
 
 	rx_bottom(tp);
-	tx_bottom(tp);
 }
 
 static
@@ -1621,7 +1649,7 @@ static netdev_tx_t rtl8152_start_xmit(struct sk_buff *skb,
 		netif_stop_queue(netdev);
 
 	if (!list_empty(&tp->tx_free))
-		tasklet_schedule(&tp->tl);
+		schedule_delayed_work(&tp->schedule, 0);
 
 	return NETDEV_TX_OK;
 }
@@ -1876,6 +1904,25 @@ static void __rtl_set_wol(struct r8152 *tp, u32 wolopts)
 		device_set_wakeup_enable(&tp->udev->dev, false);
 }
 
+static void rtl_runtime_suspend_enable(struct r8152 *tp, bool enable)
+{
+	if (enable) {
+		u32 ocp_data;
+
+		__rtl_set_wol(tp, WAKE_ANY);
+
+		ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG);
+
+		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG34);
+		ocp_data |= LINK_OFF_WAKE_EN;
+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG34, ocp_data);
+
+		ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
+	} else {
+		__rtl_set_wol(tp, tp->saved_wolopts);
+	}
+}
+
 static void rtl_phy_reset(struct r8152 *tp)
 {
 	u16 data;
@@ -2467,6 +2514,9 @@ static void rtl_work_func_t(struct work_struct *work)
 {
 	struct r8152 *tp = container_of(work, struct r8152, schedule.work);
 
+	if (usb_autopm_get_interface(tp->intf) < 0)
+		return;
+
 	if (!test_bit(WORK_ENABLE, &tp->flags))
 		goto out1;
 
@@ -2479,12 +2529,14 @@ static void rtl_work_func_t(struct work_struct *work)
 	if (test_bit(RTL8152_SET_RX_MODE, &tp->flags))
 		_rtl8152_set_rx_mode(tp->netdev);
 
+	if (tp->speed & LINK_STATUS)
+		tx_bottom(tp);
 
 	if (test_bit(PHY_RESET, &tp->flags))
 		rtl_phy_reset(tp);
 
 out1:
-	return;
+	usb_autopm_put_interface(tp->intf);
 }
 
 static int rtl8152_open(struct net_device *netdev)
@@ -2496,6 +2548,21 @@ static int rtl8152_open(struct net_device *netdev)
 	if (res)
 		goto out;
 
+	res = usb_autopm_get_interface(tp->intf);
+	if (res < 0) {
+		free_all_mem(tp);
+		goto out;
+	}
+
+	/* The WORK_ENABLE may be set when autoresume occurs */
+	if (test_bit(WORK_ENABLE, &tp->flags)) {
+		clear_bit(WORK_ENABLE, &tp->flags);
+		usb_kill_urb(tp->intr_urb);
+		cancel_delayed_work_sync(&tp->schedule);
+		if (tp->speed & LINK_STATUS)
+			tp->rtl_ops.disable(tp);
+	}
+
 	tp->rtl_ops.up(tp);
 
 	rtl8152_set_speed(tp, AUTONEG_ENABLE,
@@ -2514,6 +2581,7 @@ static int rtl8152_open(struct net_device *netdev)
 		free_all_mem(tp);
 	}
 
+	usb_autopm_put_interface(tp->intf);
 
 out:
 	return res;
@@ -2528,9 +2596,26 @@ static int rtl8152_close(struct net_device *netdev)
 	usb_kill_urb(tp->intr_urb);
 	cancel_delayed_work_sync(&tp->schedule);
 	netif_stop_queue(netdev);
-	tasklet_disable(&tp->tl);
-	tp->rtl_ops.down(tp);
-	tasklet_enable(&tp->tl);
+
+	res = usb_autopm_get_interface(tp->intf);
+	if (res < 0) {
+		rtl_drop_queued_tx(tp);
+	} else {
+		/*
+		 * The autosuspend may have been enabled and wouldn't
+		 * be disable when autoresume occurs, because the
+		 * netif_running() would be false.
+		 */
+		if (test_bit(SELECTIVE_SUSPEND, &tp->flags)) {
+			rtl_runtime_suspend_enable(tp, false);
+			clear_bit(SELECTIVE_SUSPEND, &tp->flags);
+		}
+
+		tasklet_disable(&tp->tl);
+		tp->rtl_ops.down(tp);
+		tasklet_enable(&tp->tl);
+		usb_autopm_put_interface(tp->intf);
+	}
 
 	free_all_mem(tp);
 
@@ -2684,15 +2769,22 @@ static int rtl8152_suspend(struct usb_interface *intf, pm_message_t message)
 {
 	struct r8152 *tp = usb_get_intfdata(intf);
 
-	netif_device_detach(tp->netdev);
+	if (PMSG_IS_AUTO(message))
+		set_bit(SELECTIVE_SUSPEND, &tp->flags);
+	else
+		netif_device_detach(tp->netdev);
 
 	if (netif_running(tp->netdev)) {
 		clear_bit(WORK_ENABLE, &tp->flags);
 		usb_kill_urb(tp->intr_urb);
 		cancel_delayed_work_sync(&tp->schedule);
-		tasklet_disable(&tp->tl);
-		tp->rtl_ops.down(tp);
-		tasklet_enable(&tp->tl);
+		if (test_bit(SELECTIVE_SUSPEND, &tp->flags)) {
+			rtl_runtime_suspend_enable(tp, true);
+		} else {
+			tasklet_disable(&tp->tl);
+			tp->rtl_ops.down(tp);
+			tasklet_enable(&tp->tl);
+		}
 	}
 
 	return 0;
@@ -2702,13 +2794,23 @@ static int rtl8152_resume(struct usb_interface *intf)
 {
 	struct r8152 *tp = usb_get_intfdata(intf);
 
-	tp->rtl_ops.init(tp);
-	netif_device_attach(tp->netdev);
+	if (!test_bit(SELECTIVE_SUSPEND, &tp->flags)) {
+		tp->rtl_ops.init(tp);
+		netif_device_attach(tp->netdev);
+	}
+
 	if (netif_running(tp->netdev)) {
-		tp->rtl_ops.up(tp);
-		rtl8152_set_speed(tp, AUTONEG_ENABLE,
+		if (test_bit(SELECTIVE_SUSPEND, &tp->flags)) {
+			rtl_runtime_suspend_enable(tp, false);
+			clear_bit(SELECTIVE_SUSPEND, &tp->flags);
+			if (tp->speed & LINK_STATUS)
+				tp->rtl_ops.disable(tp);
+		} else {
+			tp->rtl_ops.up(tp);
+			rtl8152_set_speed(tp, AUTONEG_ENABLE,
 				tp->mii.supports_gmii ? SPEED_1000 : SPEED_100,
 				DUPLEX_FULL);
+		}
 		tp->speed = 0;
 		netif_carrier_off(tp->netdev);
 		set_bit(WORK_ENABLE, &tp->flags);
@@ -2722,18 +2824,31 @@ static void rtl8152_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 {
 	struct r8152 *tp = netdev_priv(dev);
 
+	if (usb_autopm_get_interface(tp->intf) < 0)
+		return;
+
 	wol->supported = WAKE_ANY;
 	wol->wolopts = __rtl_get_wol(tp);
+
+	usb_autopm_put_interface(tp->intf);
 }
 
 static int rtl8152_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 {
 	struct r8152 *tp = netdev_priv(dev);
+	int ret;
+
+	ret = usb_autopm_get_interface(tp->intf);
+	if (ret < 0)
+		goto out_set_wol;
 
 	__rtl_set_wol(tp, wol->wolopts);
 	tp->saved_wolopts = wol->wolopts & WAKE_ANY;
 
-	return 0;
+	usb_autopm_put_interface(tp->intf);
+
+out_set_wol:
+	return ret;
 }
 
 static void rtl8152_get_drvinfo(struct net_device *netdev,
@@ -2760,8 +2875,18 @@ int rtl8152_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
 static int rtl8152_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
 	struct r8152 *tp = netdev_priv(dev);
+	int ret;
+
+	ret = usb_autopm_get_interface(tp->intf);
+	if (ret < 0)
+		goto out;
 
-	return rtl8152_set_speed(tp, cmd->autoneg, cmd->speed, cmd->duplex);
+	ret = rtl8152_set_speed(tp, cmd->autoneg, cmd->speed, cmd->duplex);
+
+	usb_autopm_put_interface(tp->intf);
+
+out:
+	return ret;
 }
 
 static struct ethtool_ops ops = {
@@ -2777,7 +2902,11 @@ static int rtl8152_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
 {
 	struct r8152 *tp = netdev_priv(netdev);
 	struct mii_ioctl_data *data = if_mii(rq);
-	int res = 0;
+	int res;
+
+	res = usb_autopm_get_interface(tp->intf);
+	if (res < 0)
+		goto out;
 
 	switch (cmd) {
 	case SIOCGMIIPHY:
@@ -2800,6 +2929,9 @@ static int rtl8152_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
 		res = -EOPNOTSUPP;
 	}
 
+	usb_autopm_put_interface(tp->intf);
+
+out:
 	return res;
 }
 
@@ -2962,6 +3094,8 @@ static int rtl8152_probe(struct usb_interface *intf,
 	tp->mii.phy_id = R8152_PHY_ID;
 	tp->mii.supports_gmii = 0;
 
+	intf->needs_remote_wakeup = 1;
+
 	r8152b_get_version(tp);
 	tp->rtl_ops.init(tp);
 	set_ethernet_addr(tp);
@@ -3023,6 +3157,7 @@ static struct usb_driver rtl8152_driver = {
 	.suspend =	rtl8152_suspend,
 	.resume =	rtl8152_resume,
 	.reset_resume =	rtl8152_resume,
+	.supports_autosuspend = 1,
 };
 
 module_usb_driver(rtl8152_driver);
-- 
cgit v1.2.2


From da9bd117ffbf0eb10c9a9a3278c96e003293977a Mon Sep 17 00:00:00 2001
From: hayeswang <hayeswang@realtek.com>
Date: Tue, 18 Feb 2014 21:49:08 +0800
Subject: r8152: disable teredo for RTL8152

Disable teredo for RTL8152 by default.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/r8152.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index f303549b416a..3ff11ed6ee51 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -2021,6 +2021,7 @@ static void r8152b_exit_oob(struct r8152 *tp)
 	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
 
 	rxdy_gated_en(tp, true);
+	r8153_teredo_off(tp);
 	r8152b_hw_phy_cfg(tp);
 
 	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
-- 
cgit v1.2.2


From 9d9aafa1e8dd785d0b2e5e75e4cbbe56b13907d3 Mon Sep 17 00:00:00 2001
From: hayeswang <hayeswang@realtek.com>
Date: Tue, 18 Feb 2014 21:49:09 +0800
Subject: r8152: replace netif_rx with netif_receive_skb

Replace netif_rx with netif_receive_skb to avoid disabling irq frequently
for increasing the efficiency.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/r8152.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 3ff11ed6ee51..ff02d5d8ec41 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -1464,7 +1464,7 @@ static void rx_bottom(struct r8152 *tp)
 			memcpy(skb->data, rx_data, pkt_len);
 			skb_put(skb, pkt_len);
 			skb->protocol = eth_type_trans(skb, netdev);
-			netif_rx(skb);
+			netif_receive_skb(skb);
 			stats->rx_packets++;
 			stats->rx_bytes += pkt_len;
 
-- 
cgit v1.2.2


From a634782f6cff8cb321a1b118b1085a234f5a21ed Mon Sep 17 00:00:00 2001
From: hayeswang <hayeswang@realtek.com>
Date: Tue, 18 Feb 2014 21:49:10 +0800
Subject: r8152: set disable_hub_initiated_lpm

Set disable_hub_initiated_lpm = 1.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/r8152.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index ff02d5d8ec41..db988428cefc 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -3159,6 +3159,7 @@ static struct usb_driver rtl8152_driver = {
 	.resume =	rtl8152_resume,
 	.reset_resume =	rtl8152_resume,
 	.supports_autosuspend = 1,
+	.disable_hub_initiated_lpm = 1,
 };
 
 module_usb_driver(rtl8152_driver);
-- 
cgit v1.2.2


From a5ec27c1509b1dd2918aff8e6804056984fbf598 Mon Sep 17 00:00:00 2001
From: hayeswang <hayeswang@realtek.com>
Date: Tue, 18 Feb 2014 21:49:11 +0800
Subject: r8152: support get_msglevel and set_msglevel

Support get_msglevel and set_msglevel.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/r8152.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index db988428cefc..0654bd3c4591 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -2852,6 +2852,20 @@ out_set_wol:
 	return ret;
 }
 
+static u32 rtl8152_get_msglevel(struct net_device *dev)
+{
+	struct r8152 *tp = netdev_priv(dev);
+
+	return tp->msg_enable;
+}
+
+static void rtl8152_set_msglevel(struct net_device *dev, u32 value)
+{
+	struct r8152 *tp = netdev_priv(dev);
+
+	tp->msg_enable = value;
+}
+
 static void rtl8152_get_drvinfo(struct net_device *netdev,
 				struct ethtool_drvinfo *info)
 {
@@ -2895,6 +2909,8 @@ static struct ethtool_ops ops = {
 	.get_settings = rtl8152_get_settings,
 	.set_settings = rtl8152_set_settings,
 	.get_link = ethtool_op_get_link,
+	.get_msglevel = rtl8152_get_msglevel,
+	.set_msglevel = rtl8152_set_msglevel,
 	.get_wol = rtl8152_get_wol,
 	.set_wol = rtl8152_set_wol,
 };
-- 
cgit v1.2.2


From 3b7d636b50fb38e4e0f1113ba7bff8dcd19d140f Mon Sep 17 00:00:00 2001
From: Veaceslav Falico <vfalico@redhat.com>
Date: Tue, 18 Feb 2014 07:48:36 +0100
Subject: bonding: remove bond->lock from bond_arp_rcv

We're always called with rcu_read_lock() held (bond_arp_rcv() is only
called from bond_handle_frame(), which is rx_handler and always called
under rcu from __netif_receive_skb_core() ).

The slave active/passive and/or bonding params can change in-flight, however
we don't really care about that - we only modify the last time packet was
received, which is harmless.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Acked-by: Ding Tianhong <dingtianhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_main.c | 3 ---
 1 file changed, 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 3bce855e627b..3c50bece69ff 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -2260,8 +2260,6 @@ int bond_arp_rcv(const struct sk_buff *skb, struct bonding *bond,
 	if (skb->protocol != __cpu_to_be16(ETH_P_ARP))
 		return RX_HANDLER_ANOTHER;
 
-	read_lock(&bond->lock);
-
 	if (!slave_do_arp_validate(bond, slave))
 		goto out_unlock;
 
@@ -2318,7 +2316,6 @@ int bond_arp_rcv(const struct sk_buff *skb, struct bonding *bond,
 		bond_validate_arp(bond, slave, tip, sip);
 
 out_unlock:
-	read_unlock(&bond->lock);
 	if (arp != (struct arphdr *)skb->data)
 		kfree(arp);
 	return RX_HANDLER_ANOTHER;
-- 
cgit v1.2.2


From 13ac34a8866e31b31db6237c73aa558aff84d765 Mon Sep 17 00:00:00 2001
From: Veaceslav Falico <vfalico@redhat.com>
Date: Tue, 18 Feb 2014 07:48:37 +0100
Subject: bonding: permit using arp_validate with non-ab modes

Currently it's disabled because it's sometimes hard, in typical configs, to
make it work - because of the nature how the loadbalance modes work - as
it's hard to deliver valid arp replies to correct slaves by the switch.

However we still can use arp_validation in loadbalance with several other
configs, per example with arp_validate == 2 for backup with one broadcast
domain, without the switch(es) doing any balancing - this way we'd be (a
bit more) sure that the slave is up.

So, enable it to let users decide which one works/suits them best. Also
correct the mode limitation from BOND_OPT_ARP_VALIDATE.

CC: Nikolay Aleksandrov <nikolay@redhat.com>
CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Acked-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_main.c    | 4 ----
 drivers/net/bonding/bond_options.c | 3 ++-
 2 files changed, 2 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 3c50bece69ff..91c024862c80 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -4183,10 +4183,6 @@ static int bond_check_params(struct bond_params *params)
 	}
 
 	if (arp_validate) {
-		if (bond_mode != BOND_MODE_ACTIVEBACKUP) {
-			pr_err("arp_validate only supported in active-backup mode\n");
-			return -EINVAL;
-		}
 		if (!arp_interval) {
 			pr_err("arp_validate requires arp_interval\n");
 			return -EINVAL;
diff --git a/drivers/net/bonding/bond_options.c b/drivers/net/bonding/bond_options.c
index f3eb44d2e231..4d58645b117d 100644
--- a/drivers/net/bonding/bond_options.c
+++ b/drivers/net/bonding/bond_options.c
@@ -151,7 +151,8 @@ static struct bond_option bond_opts[] = {
 		.id = BOND_OPT_ARP_VALIDATE,
 		.name = "arp_validate",
 		.desc = "validate src/dst of ARP probes",
-		.unsuppmodes = BOND_MODE_ALL_EX(BIT(BOND_MODE_ACTIVEBACKUP)),
+		.unsuppmodes = BIT(BOND_MODE_8023AD) | BIT(BOND_MODE_TLB) |
+			       BIT(BOND_MODE_ALB),
 		.values = bond_arp_validate_tbl,
 		.set = bond_option_arp_validate_set
 	},
-- 
cgit v1.2.2


From 6db4a54593ce12423c68155b7b59b9fbd3e6519d Mon Sep 17 00:00:00 2001
From: Veaceslav Falico <vfalico@redhat.com>
Date: Tue, 18 Feb 2014 07:48:38 +0100
Subject: bonding: always update last_arp_rx on packet recieve

Currently we're updating the last_arp_rx only when we've validate the
packet, however afterwards we use it as 'ANY last packet received', but not
only validated ARPs.

Fix this by updating it in case of any packet received. It won't break the
arp_validation=0 because we, anyway, return the correct slave->dev->last_rx in
slave_last_rx().

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_main.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 91c024862c80..7747cc5c62eb 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -2257,6 +2257,8 @@ int bond_arp_rcv(const struct sk_buff *skb, struct bonding *bond,
 	__be32 sip, tip;
 	int alen;
 
+	slave->last_arp_rx = jiffies;
+
 	if (skb->protocol != __cpu_to_be16(ETH_P_ARP))
 		return RX_HANDLER_ANOTHER;
 
-- 
cgit v1.2.2


From 3fe68df97c7f132495664358e0bfbfcd4ca7809c Mon Sep 17 00:00:00 2001
From: Veaceslav Falico <vfalico@redhat.com>
Date: Tue, 18 Feb 2014 07:48:39 +0100
Subject: bonding: always set recv_probe to bond_arp_rcv in arp monitor

Currently we only set bond_arp_rcv() if we're using arp_validate, however
this makes us skip updating last_arp_rx if we're not validating incoming
ARPs - thus, if arp_validate is off, last_arp_rx will never be updated.

Fix this by always setting up recv_probe = bond_arp_rcv, even if we're not
using arp_validate.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_main.c    | 3 +--
 drivers/net/bonding/bond_options.c | 3 +--
 2 files changed, 2 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 7747cc5c62eb..257ee7f05645 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -3059,8 +3059,7 @@ static int bond_open(struct net_device *bond_dev)
 
 	if (bond->params.arp_interval) {  /* arp interval, in milliseconds. */
 		queue_delayed_work(bond->wq, &bond->arp_work, 0);
-		if (bond->params.arp_validate)
-			bond->recv_probe = bond_arp_rcv;
+		bond->recv_probe = bond_arp_rcv;
 	}
 
 	if (bond->params.mode == BOND_MODE_8023AD) {
diff --git a/drivers/net/bonding/bond_options.c b/drivers/net/bonding/bond_options.c
index 4d58645b117d..ad20c8ca11b6 100644
--- a/drivers/net/bonding/bond_options.c
+++ b/drivers/net/bonding/bond_options.c
@@ -810,8 +810,7 @@ int bond_option_arp_interval_set(struct bonding *bond,
 			cancel_delayed_work_sync(&bond->arp_work);
 		} else {
 			/* arp_validate can be set only in active-backup mode */
-			if (bond->params.arp_validate)
-				bond->recv_probe = bond_arp_rcv;
+			bond->recv_probe = bond_arp_rcv;
 			cancel_delayed_work_sync(&bond->mii_work);
 			queue_delayed_work(bond->wq, &bond->arp_work, 0);
 		}
-- 
cgit v1.2.2


From 896149ff1b2c48962b7e8eee797552c61f8d5b93 Mon Sep 17 00:00:00 2001
From: Veaceslav Falico <vfalico@redhat.com>
Date: Tue, 18 Feb 2014 07:48:40 +0100
Subject: bonding: extend arp_validate to be able to receive unvalidated
 arp-only traffic

Currently we can either receive any traffic as a proff of slave being up,
or only *validated* arp traffic (i.e. with src/dst ip checked).

Add an option to be able to specify if we want to receive non-validated arp
traffic only.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_options.c | 13 ++++++++-----
 drivers/net/bonding/bonding.h      | 11 +++++++++++
 2 files changed, 19 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_options.c b/drivers/net/bonding/bond_options.c
index ad20c8ca11b6..5f997b9af54d 100644
--- a/drivers/net/bonding/bond_options.c
+++ b/drivers/net/bonding/bond_options.c
@@ -47,11 +47,14 @@ static struct bond_opt_value bond_xmit_hashtype_tbl[] = {
 };
 
 static struct bond_opt_value bond_arp_validate_tbl[] = {
-	{ "none",   BOND_ARP_VALIDATE_NONE,   BOND_VALFLAG_DEFAULT},
-	{ "active", BOND_ARP_VALIDATE_ACTIVE, 0},
-	{ "backup", BOND_ARP_VALIDATE_BACKUP, 0},
-	{ "all",    BOND_ARP_VALIDATE_ALL,    0},
-	{ NULL,     -1,                       0},
+	{ "none",		BOND_ARP_VALIDATE_NONE,		BOND_VALFLAG_DEFAULT},
+	{ "active",		BOND_ARP_VALIDATE_ACTIVE,	0},
+	{ "backup",		BOND_ARP_VALIDATE_BACKUP,	0},
+	{ "all",		BOND_ARP_VALIDATE_ALL,		0},
+	{ "filter",		BOND_ARP_FILTER,		0},
+	{ "filter_active",	BOND_ARP_FILTER_ACTIVE,		0},
+	{ "filter_backup",	BOND_ARP_FILTER_BACKUP,		0},
+	{ NULL,			-1,				0},
 };
 
 static struct bond_opt_value bond_arp_all_targets_tbl[] = {
diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h
index 86ccfb9f71cc..ab2e651d7bc3 100644
--- a/drivers/net/bonding/bonding.h
+++ b/drivers/net/bonding/bonding.h
@@ -342,6 +342,11 @@ static inline bool bond_is_active_slave(struct slave *slave)
 #define BOND_ARP_VALIDATE_BACKUP	(1 << BOND_STATE_BACKUP)
 #define BOND_ARP_VALIDATE_ALL		(BOND_ARP_VALIDATE_ACTIVE | \
 					 BOND_ARP_VALIDATE_BACKUP)
+#define BOND_ARP_FILTER			(BOND_ARP_VALIDATE_ALL + 1)
+#define BOND_ARP_FILTER_ACTIVE		(BOND_ARP_VALIDATE_ACTIVE | \
+					 BOND_ARP_FILTER)
+#define BOND_ARP_FILTER_BACKUP		(BOND_ARP_VALIDATE_BACKUP | \
+					 BOND_ARP_FILTER)
 
 static inline int slave_do_arp_validate(struct bonding *bond,
 					struct slave *slave)
@@ -349,6 +354,12 @@ static inline int slave_do_arp_validate(struct bonding *bond,
 	return bond->params.arp_validate & (1 << bond_slave_state(slave));
 }
 
+static inline int slave_do_arp_validate_only(struct bonding *bond,
+					     struct slave *slave)
+{
+	return bond->params.arp_validate & BOND_ARP_FILTER;
+}
+
 /* Get the oldest arp which we've received on this slave for bond's
  * arp_targets.
  */
-- 
cgit v1.2.2


From f2cb691a7735d7903398aa914b7e567536ea98e4 Mon Sep 17 00:00:00 2001
From: Veaceslav Falico <vfalico@redhat.com>
Date: Tue, 18 Feb 2014 07:48:42 +0100
Subject: bonding: use the new options to correctly set last_arp_rx

Now that the options are in place - arp_validate can be set to receive all
the traffic or only arp packets to verify if the slave is up, when the
slave isn't validated.

CC: Rob Landley <rob@landley.net>
CC: "David S. Miller" <davem@davemloft.net>
CC: Nikolay Aleksandrov <nikolay@redhat.com>
CC: Ding Tianhong <dingtianhong@huawei.com>
CC: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_main.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 257ee7f05645..3fe81cdbd8fb 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -2255,15 +2255,16 @@ int bond_arp_rcv(const struct sk_buff *skb, struct bonding *bond,
 	struct arphdr *arp = (struct arphdr *)skb->data;
 	unsigned char *arp_ptr;
 	__be32 sip, tip;
-	int alen;
+	int alen, is_arp = skb->protocol == __cpu_to_be16(ETH_P_ARP);
 
-	slave->last_arp_rx = jiffies;
-
-	if (skb->protocol != __cpu_to_be16(ETH_P_ARP))
+	if (!slave_do_arp_validate(bond, slave)) {
+		if ((slave_do_arp_validate_only(bond, slave) && is_arp) ||
+		    !slave_do_arp_validate_only(bond, slave))
+			slave->last_arp_rx = jiffies;
 		return RX_HANDLER_ANOTHER;
-
-	if (!slave_do_arp_validate(bond, slave))
-		goto out_unlock;
+	} else if (!is_arp) {
+		return RX_HANDLER_ANOTHER;
+	}
 
 	alen = arp_hdr_len(bond->dev);
 
-- 
cgit v1.2.2


From 9f242738376dfcf5d73c47de061a8dc301d653d1 Mon Sep 17 00:00:00 2001
From: Veaceslav Falico <vfalico@redhat.com>
Date: Tue, 18 Feb 2014 07:48:43 +0100
Subject: bonding: use last_arp_rx in slave_last_rx()

Now that last_arp_rx really has the last time we've received any (validated or
not) ARP, we can use it in slave_last_rx() instead of slave->dev->last_rx.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bonding.h | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h
index ab2e651d7bc3..ae20c5a9d00d 100644
--- a/drivers/net/bonding/bonding.h
+++ b/drivers/net/bonding/bonding.h
@@ -379,14 +379,10 @@ static inline unsigned long slave_oldest_target_arp_rx(struct bonding *bond,
 static inline unsigned long slave_last_rx(struct bonding *bond,
 					struct slave *slave)
 {
-	if (slave_do_arp_validate(bond, slave)) {
-		if (bond->params.arp_all_targets == BOND_ARP_TARGETS_ALL)
-			return slave_oldest_target_arp_rx(bond, slave);
-		else
-			return slave->last_arp_rx;
-	}
+	if (bond->params.arp_all_targets == BOND_ARP_TARGETS_ALL)
+		return slave_oldest_target_arp_rx(bond, slave);
 
-	return slave->dev->last_rx;
+	return slave->last_arp_rx;
 }
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
-- 
cgit v1.2.2


From ff71529da40eee34458b1c3d62ca158a13e99b4d Mon Sep 17 00:00:00 2001
From: Veaceslav Falico <vfalico@redhat.com>
Date: Tue, 18 Feb 2014 07:48:44 +0100
Subject: bonding: use last_arp_rx in bond_loadbalance_arp_mon()

Now that last_arp_rx correctly show the last time we've received an ARP, we
can use it safely instead of slave->dev->last_rx.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 3fe81cdbd8fb..e7aab9a6a670 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -2372,7 +2372,7 @@ static void bond_loadbalance_arp_mon(struct work_struct *work)
 
 		if (slave->link != BOND_LINK_UP) {
 			if (bond_time_in_interval(bond, trans_start, 1) &&
-			    bond_time_in_interval(bond, slave->dev->last_rx, 1)) {
+			    bond_time_in_interval(bond, slave->last_arp_rx, 1)) {
 
 				slave->link  = BOND_LINK_UP;
 				slave_state_changed = 1;
@@ -2401,7 +2401,7 @@ static void bond_loadbalance_arp_mon(struct work_struct *work)
 			 * if we don't know our ip yet
 			 */
 			if (!bond_time_in_interval(bond, trans_start, 2) ||
-			    !bond_time_in_interval(bond, slave->dev->last_rx, 2)) {
+			    !bond_time_in_interval(bond, slave->last_arp_rx, 2)) {
 
 				slave->link  = BOND_LINK_DOWN;
 				slave_state_changed = 1;
-- 
cgit v1.2.2


From f8ff080dacecc5d0ce3579941b664bac3a4405c2 Mon Sep 17 00:00:00 2001
From: Veaceslav Falico <vfalico@redhat.com>
Date: Tue, 18 Feb 2014 07:48:45 +0100
Subject: bonding: remove useless updating of slave->dev->last_rx

Now that all the logic is handled via last_arp_rx, we don't need to use
last_rx.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_main.c | 3 ---
 1 file changed, 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index e7aab9a6a670..14e023de09d6 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1115,9 +1115,6 @@ static rx_handler_result_t bond_handle_frame(struct sk_buff **pskb)
 	slave = bond_slave_get_rcu(skb->dev);
 	bond = slave->bond;
 
-	if (bond->params.arp_interval)
-		slave->dev->last_rx = jiffies;
-
 	recv_probe = ACCESS_ONCE(bond->recv_probe);
 	if (recv_probe) {
 		ret = recv_probe(skb, bond, slave);
-- 
cgit v1.2.2


From 8e603460fa388c89f08e359366ec9398971cf49c Mon Sep 17 00:00:00 2001
From: Veaceslav Falico <vfalico@redhat.com>
Date: Tue, 18 Feb 2014 07:48:46 +0100
Subject: bonding: trivial: rename slave->jiffies to ->last_link_up

slave->jiffies is updated every time the slave becomes active, which, for
bonding, means that its link is 'up'.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_main.c | 20 ++++++++++----------
 drivers/net/bonding/bonding.h   |  3 ++-
 2 files changed, 12 insertions(+), 11 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 14e023de09d6..f6d56d911a86 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -798,7 +798,7 @@ void bond_change_active_slave(struct bonding *bond, struct slave *new_active)
 		return;
 
 	if (new_active) {
-		new_active->jiffies = jiffies;
+		new_active->last_link_up = jiffies;
 
 		if (new_active->link == BOND_LINK_BACK) {
 			if (USES_PRIMARY(bond->params.mode)) {
@@ -1444,7 +1444,7 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 	}
 
 	if (new_slave->link != BOND_LINK_DOWN)
-		new_slave->jiffies = jiffies;
+		new_slave->last_link_up = jiffies;
 	pr_debug("Initial state of slave_dev is BOND_LINK_%s\n",
 		 new_slave->link == BOND_LINK_DOWN ? "DOWN" :
 		 (new_slave->link == BOND_LINK_UP ? "UP" : "BACK"));
@@ -1891,7 +1891,7 @@ static int bond_miimon_inspect(struct bonding *bond)
 				 * recovered before downdelay expired
 				 */
 				slave->link = BOND_LINK_UP;
-				slave->jiffies = jiffies;
+				slave->last_link_up = jiffies;
 				pr_info("%s: link status up again after %d ms for interface %s\n",
 					bond->dev->name,
 					(bond->params.downdelay - slave->delay) *
@@ -1966,7 +1966,7 @@ static void bond_miimon_commit(struct bonding *bond)
 
 		case BOND_LINK_UP:
 			slave->link = BOND_LINK_UP;
-			slave->jiffies = jiffies;
+			slave->last_link_up = jiffies;
 
 			if (bond->params.mode == BOND_MODE_8023AD) {
 				/* prevent it from being the active one */
@@ -2312,7 +2312,7 @@ int bond_arp_rcv(const struct sk_buff *skb, struct bonding *bond,
 		bond_validate_arp(bond, slave, sip, tip);
 	else if (bond->curr_active_slave &&
 		 time_after(slave_last_rx(bond, bond->curr_active_slave),
-			    bond->curr_active_slave->jiffies))
+			    bond->curr_active_slave->last_link_up))
 		bond_validate_arp(bond, slave, tip, sip);
 
 out_unlock:
@@ -2358,9 +2358,9 @@ static void bond_loadbalance_arp_mon(struct work_struct *work)
 	oldcurrent = ACCESS_ONCE(bond->curr_active_slave);
 	/* see if any of the previous devices are up now (i.e. they have
 	 * xmt and rcv traffic). the curr_active_slave does not come into
-	 * the picture unless it is null. also, slave->jiffies is not needed
-	 * here because we send an arp on each slave and give a slave as
-	 * long as it needs to get the tx/rx within the delta.
+	 * the picture unless it is null. also, slave->last_link_up is not
+	 * needed here because we send an arp on each slave and give a slave
+	 * as long as it needs to get the tx/rx within the delta.
 	 * TODO: what about up/down delay in arp mode? it wasn't here before
 	 *       so it can wait
 	 */
@@ -2486,7 +2486,7 @@ static int bond_ab_arp_inspect(struct bonding *bond)
 		 * active.  This avoids bouncing, as the last receive
 		 * times need a full ARP monitor cycle to be updated.
 		 */
-		if (bond_time_in_interval(bond, slave->jiffies, 2))
+		if (bond_time_in_interval(bond, slave->last_link_up, 2))
 			continue;
 
 		/*
@@ -2687,7 +2687,7 @@ static bool bond_ab_arp_probe(struct bonding *bond)
 	new_slave->link = BOND_LINK_BACK;
 	bond_set_slave_active_flags(new_slave);
 	bond_arp_send_all(bond, new_slave);
-	new_slave->jiffies = jiffies;
+	new_slave->last_link_up = jiffies;
 	rcu_assign_pointer(bond->current_arp_slave, new_slave);
 	rtnl_unlock();
 
diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h
index ae20c5a9d00d..36db702d32e7 100644
--- a/drivers/net/bonding/bonding.h
+++ b/drivers/net/bonding/bonding.h
@@ -188,7 +188,8 @@ struct slave {
 	struct net_device *dev; /* first - useful for panic debug */
 	struct bonding *bond; /* our master */
 	int    delay;
-	unsigned long jiffies;
+	/* all three in jiffies */
+	unsigned long last_link_up;
 	unsigned long last_arp_rx;
 	unsigned long target_last_arp_rx[BOND_MAX_ARP_TARGETS];
 	s8     link;    /* one of BOND_LINK_XXXX */
-- 
cgit v1.2.2


From 49f17de72174ceb340a96996e14058e8f6ff951d Mon Sep 17 00:00:00 2001
From: Veaceslav Falico <vfalico@redhat.com>
Date: Tue, 18 Feb 2014 07:48:47 +0100
Subject: bonding: rename last_arp_rx to last_rx

To reflect the new meaning.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_main.c | 12 ++++++------
 drivers/net/bonding/bonding.h   |  4 ++--
 2 files changed, 8 insertions(+), 8 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index f6d56d911a86..ac4a1b88115e 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1397,10 +1397,10 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 
 	bond_update_speed_duplex(new_slave);
 
-	new_slave->last_arp_rx = jiffies -
+	new_slave->last_rx = jiffies -
 		(msecs_to_jiffies(bond->params.arp_interval) + 1);
 	for (i = 0; i < BOND_MAX_ARP_TARGETS; i++)
-		new_slave->target_last_arp_rx[i] = new_slave->last_arp_rx;
+		new_slave->target_last_arp_rx[i] = new_slave->last_rx;
 
 	if (bond->params.miimon && !bond->params.use_carrier) {
 		link_reporting = bond_check_dev_link(bond, slave_dev, 1);
@@ -2242,7 +2242,7 @@ static void bond_validate_arp(struct bonding *bond, struct slave *slave, __be32
 		pr_debug("bva: sip %pI4 not found in targets\n", &sip);
 		return;
 	}
-	slave->last_arp_rx = jiffies;
+	slave->last_rx = jiffies;
 	slave->target_last_arp_rx[i] = jiffies;
 }
 
@@ -2257,7 +2257,7 @@ int bond_arp_rcv(const struct sk_buff *skb, struct bonding *bond,
 	if (!slave_do_arp_validate(bond, slave)) {
 		if ((slave_do_arp_validate_only(bond, slave) && is_arp) ||
 		    !slave_do_arp_validate_only(bond, slave))
-			slave->last_arp_rx = jiffies;
+			slave->last_rx = jiffies;
 		return RX_HANDLER_ANOTHER;
 	} else if (!is_arp) {
 		return RX_HANDLER_ANOTHER;
@@ -2369,7 +2369,7 @@ static void bond_loadbalance_arp_mon(struct work_struct *work)
 
 		if (slave->link != BOND_LINK_UP) {
 			if (bond_time_in_interval(bond, trans_start, 1) &&
-			    bond_time_in_interval(bond, slave->last_arp_rx, 1)) {
+			    bond_time_in_interval(bond, slave->last_rx, 1)) {
 
 				slave->link  = BOND_LINK_UP;
 				slave_state_changed = 1;
@@ -2398,7 +2398,7 @@ static void bond_loadbalance_arp_mon(struct work_struct *work)
 			 * if we don't know our ip yet
 			 */
 			if (!bond_time_in_interval(bond, trans_start, 2) ||
-			    !bond_time_in_interval(bond, slave->last_arp_rx, 2)) {
+			    !bond_time_in_interval(bond, slave->last_rx, 2)) {
 
 				slave->link  = BOND_LINK_DOWN;
 				slave_state_changed = 1;
diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h
index 36db702d32e7..430362891d0d 100644
--- a/drivers/net/bonding/bonding.h
+++ b/drivers/net/bonding/bonding.h
@@ -190,7 +190,7 @@ struct slave {
 	int    delay;
 	/* all three in jiffies */
 	unsigned long last_link_up;
-	unsigned long last_arp_rx;
+	unsigned long last_rx;
 	unsigned long target_last_arp_rx[BOND_MAX_ARP_TARGETS];
 	s8     link;    /* one of BOND_LINK_XXXX */
 	s8     new_link;
@@ -383,7 +383,7 @@ static inline unsigned long slave_last_rx(struct bonding *bond,
 	if (bond->params.arp_all_targets == BOND_ARP_TARGETS_ALL)
 		return slave_oldest_target_arp_rx(bond, slave);
 
-	return slave->last_arp_rx;
+	return slave->last_rx;
 }
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
-- 
cgit v1.2.2


From 6df3efccee5f56f08e5e6a398462dfbb7fcb3a6c Mon Sep 17 00:00:00 2001
From: Justin van Wijngaarden <justinvanwijngaarden@gmail.com>
Date: Mon, 17 Feb 2014 23:58:46 +0100
Subject: Drivers: net: ethernet: 3com: 3c589_cs fixed coding style issues

checkpatch.pl clean-up, from 14 error/ 277 warnings, to 0 errors, 7 warnings

Signed-off-by: Justin van Wijngaarden <justinvanwijngaarden@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/3com/3c589_cs.c | 1127 ++++++++++++++++++----------------
 1 file changed, 584 insertions(+), 543 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/3com/3c589_cs.c b/drivers/net/ethernet/3com/3c589_cs.c
index 5992860a39c9..063557e037f2 100644
--- a/drivers/net/ethernet/3com/3c589_cs.c
+++ b/drivers/net/ethernet/3com/3c589_cs.c
@@ -1,23 +1,24 @@
-/*======================================================================
-
-    A PCMCIA ethernet driver for the 3com 3c589 card.
-
-    Copyright (C) 1999 David A. Hinds -- dahinds@users.sourceforge.net
-
-    3c589_cs.c 1.162 2001/10/13 00:08:50
-
-    The network driver code is based on Donald Becker's 3c589 code:
-
-    Written 1994 by Donald Becker.
-    Copyright 1993 United States Government as represented by the
-    Director, National Security Agency.  This software may be used and
-    distributed according to the terms of the GNU General Public License,
-    incorporated herein by reference.
-    Donald Becker may be reached at becker@scyld.com
-
-    Updated for 2.5.x by Alan Cox <alan@lxorguk.ukuu.org.uk>
-
-======================================================================*/
+/* ======================================================================
+ *
+ * A PCMCIA ethernet driver for the 3com 3c589 card.
+ *
+ * Copyright (C) 1999 David A. Hinds -- dahinds@users.sourceforge.net
+ *
+ * 3c589_cs.c 1.162 2001/10/13 00:08:50
+ *
+ * The network driver code is based on Donald Becker's 3c589 code:
+ *
+ * Written 1994 by Donald Becker.
+ * Copyright 1993 United States Government as represented by the
+ * Director, National Security Agency.  This software may be used and
+ * distributed according to the terms of the GNU General Public License,
+ * incorporated herein by reference.
+ * Donald Becker may be reached at becker@scyld.com
+ *
+ * Updated for 2.5.x by Alan Cox <alan@lxorguk.ukuu.org.uk>
+ *
+ * ======================================================================
+ */
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
@@ -41,18 +42,20 @@
 #include <linux/ioport.h>
 #include <linux/bitops.h>
 #include <linux/jiffies.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
 
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ciscode.h>
 #include <pcmcia/ds.h>
 
-#include <asm/uaccess.h>
-#include <asm/io.h>
 
 /* To minimize the size of the driver source I only define operating
-   constants if they are used several times.  You'll need the manual
-   if you want to understand driver details. */
+ * constants if they are used several times. You'll need the manual
+ * if you want to understand driver details.
+ */
+
 /* Offsets from base I/O address. */
 #define EL3_DATA	0x00
 #define EL3_TIMER	0x0a
@@ -65,7 +68,9 @@
 #define EL3WINDOW(win_num) outw(SelectWindow + (win_num), ioaddr + EL3_CMD)
 
 /* The top five bits written to EL3_CMD are a command, the lower
-   11 bits are the parameter, if applicable. */
+ * 11 bits are the parameter, if applicable.
+ */
+
 enum c509cmd {
 	TotalReset	= 0<<11,
 	SelectWindow	= 1<<11,
@@ -190,138 +195,142 @@ static const struct net_device_ops el3_netdev_ops = {
 
 static int tc589_probe(struct pcmcia_device *link)
 {
-    struct el3_private *lp;
-    struct net_device *dev;
+	struct el3_private *lp;
+	struct net_device *dev;
 
-    dev_dbg(&link->dev, "3c589_attach()\n");
+	dev_dbg(&link->dev, "3c589_attach()\n");
 
-    /* Create new ethernet device */
-    dev = alloc_etherdev(sizeof(struct el3_private));
-    if (!dev)
-	 return -ENOMEM;
-    lp = netdev_priv(dev);
-    link->priv = dev;
-    lp->p_dev = link;
+	/* Create new ethernet device */
+	dev = alloc_etherdev(sizeof(struct el3_private));
+	if (!dev)
+		return -ENOMEM;
+	lp = netdev_priv(dev);
+	link->priv = dev;
+	lp->p_dev = link;
 
-    spin_lock_init(&lp->lock);
-    link->resource[0]->end = 16;
-    link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
+	spin_lock_init(&lp->lock);
+	link->resource[0]->end = 16;
+	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
 
-    link->config_flags |= CONF_ENABLE_IRQ;
-    link->config_index = 1;
+	link->config_flags |= CONF_ENABLE_IRQ;
+	link->config_index = 1;
 
-    dev->netdev_ops = &el3_netdev_ops;
-    dev->watchdog_timeo = TX_TIMEOUT;
+	dev->netdev_ops = &el3_netdev_ops;
+	dev->watchdog_timeo = TX_TIMEOUT;
 
-    SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
+	SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
 
-    return tc589_config(link);
+	return tc589_config(link);
 }
 
 static void tc589_detach(struct pcmcia_device *link)
 {
-    struct net_device *dev = link->priv;
+	struct net_device *dev = link->priv;
 
-    dev_dbg(&link->dev, "3c589_detach\n");
+	dev_dbg(&link->dev, "3c589_detach\n");
 
-    unregister_netdev(dev);
+	unregister_netdev(dev);
 
-    tc589_release(link);
+	tc589_release(link);
 
-    free_netdev(dev);
+	free_netdev(dev);
 } /* tc589_detach */
 
 static int tc589_config(struct pcmcia_device *link)
 {
-    struct net_device *dev = link->priv;
-    __be16 *phys_addr;
-    int ret, i, j, multi = 0, fifo;
-    unsigned int ioaddr;
-    static const char * const ram_split[] = {"5:3", "3:1", "1:1", "3:5"};
-    u8 *buf;
-    size_t len;
-
-    dev_dbg(&link->dev, "3c589_config\n");
-
-    phys_addr = (__be16 *)dev->dev_addr;
-    /* Is this a 3c562? */
-    if (link->manf_id != MANFID_3COM)
-	    dev_info(&link->dev, "hmmm, is this really a 3Com card??\n");
-    multi = (link->card_id == PRODID_3COM_3C562);
-
-    link->io_lines = 16;
-
-    /* For the 3c562, the base address must be xx00-xx7f */
-    for (i = j = 0; j < 0x400; j += 0x10) {
-	if (multi && (j & 0x80)) continue;
-	link->resource[0]->start = j ^ 0x300;
-	i = pcmcia_request_io(link);
-	if (i == 0)
-		break;
-    }
-    if (i != 0)
-	goto failed;
-
-    ret = pcmcia_request_irq(link, el3_interrupt);
-    if (ret)
-	    goto failed;
-
-    ret = pcmcia_enable_device(link);
-    if (ret)
-	    goto failed;
-
-    dev->irq = link->irq;
-    dev->base_addr = link->resource[0]->start;
-    ioaddr = dev->base_addr;
-    EL3WINDOW(0);
-
-    /* The 3c589 has an extra EEPROM for configuration info, including
-       the hardware address.  The 3c562 puts the address in the CIS. */
-    len = pcmcia_get_tuple(link, 0x88, &buf);
-    if (buf && len >= 6) {
-	    for (i = 0; i < 3; i++)
-		    phys_addr[i] = htons(le16_to_cpu(buf[i*2]));
-	    kfree(buf);
-    } else {
-	kfree(buf); /* 0 < len < 6 */
-	for (i = 0; i < 3; i++)
-	    phys_addr[i] = htons(read_eeprom(ioaddr, i));
-	if (phys_addr[0] == htons(0x6060)) {
-	    dev_err(&link->dev, "IO port conflict at 0x%03lx-0x%03lx\n",
-		    dev->base_addr, dev->base_addr+15);
-	    goto failed;
+	struct net_device *dev = link->priv;
+	__be16 *phys_addr;
+	int ret, i, j, multi = 0, fifo;
+	unsigned int ioaddr;
+	static const char * const ram_split[] = {"5:3", "3:1", "1:1", "3:5"};
+	u8 *buf;
+	size_t len;
+
+	dev_dbg(&link->dev, "3c589_config\n");
+
+	phys_addr = (__be16 *)dev->dev_addr;
+	/* Is this a 3c562? */
+	if (link->manf_id != MANFID_3COM)
+		dev_info(&link->dev, "hmmm, is this really a 3Com card??\n");
+	multi = (link->card_id == PRODID_3COM_3C562);
+
+	link->io_lines = 16;
+
+	/* For the 3c562, the base address must be xx00-xx7f */
+	for (i = j = 0; j < 0x400; j += 0x10) {
+		if (multi && (j & 0x80))
+			continue;
+		link->resource[0]->start = j ^ 0x300;
+		i = pcmcia_request_io(link);
+		if (i == 0)
+			break;
 	}
-    }
-
-    /* The address and resource configuration register aren't loaded from
-       the EEPROM and *must* be set to 0 and IRQ3 for the PCMCIA version. */
-    outw(0x3f00, ioaddr + 8);
-    fifo = inl(ioaddr);
-
-    /* The if_port symbol can be set when the module is loaded */
-    if ((if_port >= 0) && (if_port <= 3))
-	dev->if_port = if_port;
-    else
-	dev_err(&link->dev, "invalid if_port requested\n");
-
-    SET_NETDEV_DEV(dev, &link->dev);
-
-    if (register_netdev(dev) != 0) {
-	    dev_err(&link->dev, "register_netdev() failed\n");
-	goto failed;
-    }
-
-    netdev_info(dev, "3Com 3c%s, io %#3lx, irq %d, hw_addr %pM\n",
-		(multi ? "562" : "589"), dev->base_addr, dev->irq,
-		dev->dev_addr);
-    netdev_info(dev, "  %dK FIFO split %s Rx:Tx, %s xcvr\n",
-		(fifo & 7) ? 32 : 8, ram_split[(fifo >> 16) & 3],
-		if_names[dev->if_port]);
-    return 0;
+	if (i != 0)
+		goto failed;
+
+	ret = pcmcia_request_irq(link, el3_interrupt);
+	if (ret)
+		goto failed;
+
+	ret = pcmcia_enable_device(link);
+	if (ret)
+		goto failed;
+
+	dev->irq = link->irq;
+	dev->base_addr = link->resource[0]->start;
+	ioaddr = dev->base_addr;
+	EL3WINDOW(0);
+
+	/* The 3c589 has an extra EEPROM for configuration info, including
+	 * the hardware address.  The 3c562 puts the address in the CIS.
+	 */
+	len = pcmcia_get_tuple(link, 0x88, &buf);
+	if (buf && len >= 6) {
+		for (i = 0; i < 3; i++)
+			phys_addr[i] = htons(le16_to_cpu(buf[i*2]));
+		kfree(buf);
+	} else {
+		kfree(buf); /* 0 < len < 6 */
+		for (i = 0; i < 3; i++)
+			phys_addr[i] = htons(read_eeprom(ioaddr, i));
+		if (phys_addr[0] == htons(0x6060)) {
+			dev_err(&link->dev, "IO port conflict at 0x%03lx-0x%03lx\n",
+					dev->base_addr, dev->base_addr+15);
+			goto failed;
+		}
+	}
+
+	/* The address and resource configuration register aren't loaded from
+	 * the EEPROM and *must* be set to 0 and IRQ3 for the PCMCIA version.
+	 */
+
+	outw(0x3f00, ioaddr + 8);
+	fifo = inl(ioaddr);
+
+	/* The if_port symbol can be set when the module is loaded */
+	if ((if_port >= 0) && (if_port <= 3))
+		dev->if_port = if_port;
+	else
+		dev_err(&link->dev, "invalid if_port requested\n");
+
+	SET_NETDEV_DEV(dev, &link->dev);
+
+	if (register_netdev(dev) != 0) {
+		dev_err(&link->dev, "register_netdev() failed\n");
+		goto failed;
+	}
+
+	netdev_info(dev, "3Com 3c%s, io %#3lx, irq %d, hw_addr %pM\n",
+			(multi ? "562" : "589"), dev->base_addr, dev->irq,
+			dev->dev_addr);
+	netdev_info(dev, "  %dK FIFO split %s Rx:Tx, %s xcvr\n",
+			(fifo & 7) ? 32 : 8, ram_split[(fifo >> 16) & 3],
+			if_names[dev->if_port]);
+	return 0;
 
 failed:
-    tc589_release(link);
-    return -ENODEV;
+	tc589_release(link);
+	return -ENODEV;
 } /* tc589_config */
 
 static void tc589_release(struct pcmcia_device *link)
@@ -353,113 +362,120 @@ static int tc589_resume(struct pcmcia_device *link)
 
 /*====================================================================*/
 
-/*
-  Use this for commands that may take time to finish
-*/
+/* Use this for commands that may take time to finish */
+
 static void tc589_wait_for_completion(struct net_device *dev, int cmd)
 {
-    int i = 100;
-    outw(cmd, dev->base_addr + EL3_CMD);
-    while (--i > 0)
-	if (!(inw(dev->base_addr + EL3_STATUS) & 0x1000)) break;
-    if (i == 0)
-	netdev_warn(dev, "command 0x%04x did not complete!\n", cmd);
+	int i = 100;
+	outw(cmd, dev->base_addr + EL3_CMD);
+	while (--i > 0)
+		if (!(inw(dev->base_addr + EL3_STATUS) & 0x1000))
+			break;
+	if (i == 0)
+		netdev_warn(dev, "command 0x%04x did not complete!\n", cmd);
 }
 
-/*
-  Read a word from the EEPROM using the regular EEPROM access register.
-  Assume that we are in register window zero.
-*/
+/* Read a word from the EEPROM using the regular EEPROM access register.
+ * Assume that we are in register window zero.
+ */
+
 static u16 read_eeprom(unsigned int ioaddr, int index)
 {
-    int i;
-    outw(EEPROM_READ + index, ioaddr + 10);
-    /* Reading the eeprom takes 162 us */
-    for (i = 1620; i >= 0; i--)
-	if ((inw(ioaddr + 10) & EEPROM_BUSY) == 0)
-	    break;
-    return inw(ioaddr + 12);
+	int i;
+	outw(EEPROM_READ + index, ioaddr + 10);
+	/* Reading the eeprom takes 162 us */
+	for (i = 1620; i >= 0; i--)
+		if ((inw(ioaddr + 10) & EEPROM_BUSY) == 0)
+			break;
+	return inw(ioaddr + 12);
 }
 
-/*
-  Set transceiver type, perhaps to something other than what the user
-  specified in dev->if_port.
-*/
+/* Set transceiver type, perhaps to something other than what the user
+ * specified in dev->if_port.
+ */
+
 static void tc589_set_xcvr(struct net_device *dev, int if_port)
 {
-    struct el3_private *lp = netdev_priv(dev);
-    unsigned int ioaddr = dev->base_addr;
-
-    EL3WINDOW(0);
-    switch (if_port) {
-    case 0: case 1: outw(0, ioaddr + 6); break;
-    case 2: outw(3<<14, ioaddr + 6); break;
-    case 3: outw(1<<14, ioaddr + 6); break;
-    }
-    /* On PCMCIA, this just turns on the LED */
-    outw((if_port == 2) ? StartCoax : StopCoax, ioaddr + EL3_CMD);
-    /* 10baseT interface, enable link beat and jabber check. */
-    EL3WINDOW(4);
-    outw(MEDIA_LED | ((if_port < 2) ? MEDIA_TP : 0), ioaddr + WN4_MEDIA);
-    EL3WINDOW(1);
-    if (if_port == 2)
-	lp->media_status = ((dev->if_port == 0) ? 0x8000 : 0x4000);
-    else
-	lp->media_status = ((dev->if_port == 0) ? 0x4010 : 0x8800);
+	struct el3_private *lp = netdev_priv(dev);
+	unsigned int ioaddr = dev->base_addr;
+
+	EL3WINDOW(0);
+	switch (if_port) {
+	case 0:
+	case 1:
+		outw(0, ioaddr + 6);
+		break;
+	case 2:
+		outw(3<<14, ioaddr + 6);
+		break;
+	case 3:
+		outw(1<<14, ioaddr + 6);
+		break;
+	}
+	/* On PCMCIA, this just turns on the LED */
+	outw((if_port == 2) ? StartCoax : StopCoax, ioaddr + EL3_CMD);
+	/* 10baseT interface, enable link beat and jabber check. */
+	EL3WINDOW(4);
+	outw(MEDIA_LED | ((if_port < 2) ? MEDIA_TP : 0), ioaddr + WN4_MEDIA);
+	EL3WINDOW(1);
+	if (if_port == 2)
+		lp->media_status = ((dev->if_port == 0) ? 0x8000 : 0x4000);
+	else
+		lp->media_status = ((dev->if_port == 0) ? 0x4010 : 0x8800);
 }
 
 static void dump_status(struct net_device *dev)
 {
-    unsigned int ioaddr = dev->base_addr;
-    EL3WINDOW(1);
-    netdev_info(dev, "  irq status %04x, rx status %04x, tx status %02x  tx free %04x\n",
-		inw(ioaddr+EL3_STATUS), inw(ioaddr+RX_STATUS),
-		inb(ioaddr+TX_STATUS), inw(ioaddr+TX_FREE));
-    EL3WINDOW(4);
-    netdev_info(dev, "  diagnostics: fifo %04x net %04x ethernet %04x media %04x\n",
-		inw(ioaddr+0x04), inw(ioaddr+0x06), inw(ioaddr+0x08),
-		inw(ioaddr+0x0a));
-    EL3WINDOW(1);
+	unsigned int ioaddr = dev->base_addr;
+	EL3WINDOW(1);
+	netdev_info(dev, "  irq status %04x, rx status %04x, tx status %02x  tx free %04x\n",
+			inw(ioaddr+EL3_STATUS), inw(ioaddr+RX_STATUS),
+			inb(ioaddr+TX_STATUS), inw(ioaddr+TX_FREE));
+	EL3WINDOW(4);
+	netdev_info(dev, "  diagnostics: fifo %04x net %04x ethernet %04x media %04x\n",
+			inw(ioaddr+0x04), inw(ioaddr+0x06), inw(ioaddr+0x08),
+			inw(ioaddr+0x0a));
+	EL3WINDOW(1);
 }
 
 /* Reset and restore all of the 3c589 registers. */
 static void tc589_reset(struct net_device *dev)
 {
-    unsigned int ioaddr = dev->base_addr;
-    int i;
-
-    EL3WINDOW(0);
-    outw(0x0001, ioaddr + 4);			/* Activate board. */
-    outw(0x3f00, ioaddr + 8);			/* Set the IRQ line. */
-
-    /* Set the station address in window 2. */
-    EL3WINDOW(2);
-    for (i = 0; i < 6; i++)
-	outb(dev->dev_addr[i], ioaddr + i);
-
-    tc589_set_xcvr(dev, dev->if_port);
-
-    /* Switch to the stats window, and clear all stats by reading. */
-    outw(StatsDisable, ioaddr + EL3_CMD);
-    EL3WINDOW(6);
-    for (i = 0; i < 9; i++)
-	inb(ioaddr+i);
-    inw(ioaddr + 10);
-    inw(ioaddr + 12);
-
-    /* Switch to register set 1 for normal use. */
-    EL3WINDOW(1);
-
-    set_rx_mode(dev);
-    outw(StatsEnable, ioaddr + EL3_CMD); /* Turn on statistics. */
-    outw(RxEnable, ioaddr + EL3_CMD); /* Enable the receiver. */
-    outw(TxEnable, ioaddr + EL3_CMD); /* Enable transmitter. */
-    /* Allow status bits to be seen. */
-    outw(SetStatusEnb | 0xff, ioaddr + EL3_CMD);
-    /* Ack all pending events, and set active indicator mask. */
-    outw(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq,
+	unsigned int ioaddr = dev->base_addr;
+	int i;
+
+	EL3WINDOW(0);
+	outw(0x0001, ioaddr + 4);			/* Activate board. */
+	outw(0x3f00, ioaddr + 8);			/* Set the IRQ line. */
+
+	/* Set the station address in window 2. */
+	EL3WINDOW(2);
+	for (i = 0; i < 6; i++)
+		outb(dev->dev_addr[i], ioaddr + i);
+
+	tc589_set_xcvr(dev, dev->if_port);
+
+	/* Switch to the stats window, and clear all stats by reading. */
+	outw(StatsDisable, ioaddr + EL3_CMD);
+	EL3WINDOW(6);
+	for (i = 0; i < 9; i++)
+		inb(ioaddr+i);
+	inw(ioaddr + 10);
+	inw(ioaddr + 12);
+
+	/* Switch to register set 1 for normal use. */
+	EL3WINDOW(1);
+
+	set_rx_mode(dev);
+	outw(StatsEnable, ioaddr + EL3_CMD); /* Turn on statistics. */
+	outw(RxEnable, ioaddr + EL3_CMD); /* Enable the receiver. */
+	outw(TxEnable, ioaddr + EL3_CMD); /* Enable transmitter. */
+	/* Allow status bits to be seen. */
+	outw(SetStatusEnb | 0xff, ioaddr + EL3_CMD);
+	/* Ack all pending events, and set active indicator mask. */
+	outw(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq,
 	 ioaddr + EL3_CMD);
-    outw(SetIntrEnb | IntLatch | TxAvailable | RxComplete | StatsFull
+	outw(SetIntrEnb | IntLatch | TxAvailable | RxComplete | StatsFull
 	 | AdapterFailure, ioaddr + EL3_CMD);
 }
 
@@ -478,381 +494,406 @@ static const struct ethtool_ops netdev_ethtool_ops = {
 
 static int el3_config(struct net_device *dev, struct ifmap *map)
 {
-    if ((map->port != (u_char)(-1)) && (map->port != dev->if_port)) {
-	if (map->port <= 3) {
-	    dev->if_port = map->port;
-	    netdev_info(dev, "switched to %s port\n", if_names[dev->if_port]);
-	    tc589_set_xcvr(dev, dev->if_port);
-	} else
-	    return -EINVAL;
-    }
-    return 0;
+	if ((map->port != (u_char)(-1)) && (map->port != dev->if_port)) {
+		if (map->port <= 3) {
+			dev->if_port = map->port;
+			netdev_info(dev, "switched to %s port\n", if_names[dev->if_port]);
+			tc589_set_xcvr(dev, dev->if_port);
+		} else {
+			return -EINVAL;
+		}
+	}
+	return 0;
 }
 
 static int el3_open(struct net_device *dev)
 {
-    struct el3_private *lp = netdev_priv(dev);
-    struct pcmcia_device *link = lp->p_dev;
+	struct el3_private *lp = netdev_priv(dev);
+	struct pcmcia_device *link = lp->p_dev;
 
-    if (!pcmcia_dev_present(link))
-	return -ENODEV;
+	if (!pcmcia_dev_present(link))
+		return -ENODEV;
 
-    link->open++;
-    netif_start_queue(dev);
+	link->open++;
+	netif_start_queue(dev);
 
-    tc589_reset(dev);
-    init_timer(&lp->media);
-    lp->media.function = media_check;
-    lp->media.data = (unsigned long) dev;
-    lp->media.expires = jiffies + HZ;
-    add_timer(&lp->media);
+	tc589_reset(dev);
+	init_timer(&lp->media);
+	lp->media.function = media_check;
+	lp->media.data = (unsigned long) dev;
+	lp->media.expires = jiffies + HZ;
+	add_timer(&lp->media);
 
-    dev_dbg(&link->dev, "%s: opened, status %4.4x.\n",
+	dev_dbg(&link->dev, "%s: opened, status %4.4x.\n",
 	  dev->name, inw(dev->base_addr + EL3_STATUS));
 
-    return 0;
+	return 0;
 }
 
 static void el3_tx_timeout(struct net_device *dev)
 {
-    unsigned int ioaddr = dev->base_addr;
-
-    netdev_warn(dev, "Transmit timed out!\n");
-    dump_status(dev);
-    dev->stats.tx_errors++;
-    dev->trans_start = jiffies; /* prevent tx timeout */
-    /* Issue TX_RESET and TX_START commands. */
-    tc589_wait_for_completion(dev, TxReset);
-    outw(TxEnable, ioaddr + EL3_CMD);
-    netif_wake_queue(dev);
+	unsigned int ioaddr = dev->base_addr;
+
+	netdev_warn(dev, "Transmit timed out!\n");
+	dump_status(dev);
+	dev->stats.tx_errors++;
+	dev->trans_start = jiffies; /* prevent tx timeout */
+	/* Issue TX_RESET and TX_START commands. */
+	tc589_wait_for_completion(dev, TxReset);
+	outw(TxEnable, ioaddr + EL3_CMD);
+	netif_wake_queue(dev);
 }
 
 static void pop_tx_status(struct net_device *dev)
 {
-    unsigned int ioaddr = dev->base_addr;
-    int i;
-
-    /* Clear the Tx status stack. */
-    for (i = 32; i > 0; i--) {
-	u_char tx_status = inb(ioaddr + TX_STATUS);
-	if (!(tx_status & 0x84)) break;
-	/* reset transmitter on jabber error or underrun */
-	if (tx_status & 0x30)
-		tc589_wait_for_completion(dev, TxReset);
-	if (tx_status & 0x38) {
-		netdev_dbg(dev, "transmit error: status 0x%02x\n", tx_status);
-		outw(TxEnable, ioaddr + EL3_CMD);
-		dev->stats.tx_aborted_errors++;
+	unsigned int ioaddr = dev->base_addr;
+	int i;
+
+	/* Clear the Tx status stack. */
+	for (i = 32; i > 0; i--) {
+		u_char tx_status = inb(ioaddr + TX_STATUS);
+		if (!(tx_status & 0x84))
+			break;
+		/* reset transmitter on jabber error or underrun */
+		if (tx_status & 0x30)
+			tc589_wait_for_completion(dev, TxReset);
+		if (tx_status & 0x38) {
+			netdev_dbg(dev, "transmit error: status 0x%02x\n", tx_status);
+			outw(TxEnable, ioaddr + EL3_CMD);
+			dev->stats.tx_aborted_errors++;
+		}
+		outb(0x00, ioaddr + TX_STATUS); /* Pop the status stack. */
 	}
-	outb(0x00, ioaddr + TX_STATUS); /* Pop the status stack. */
-    }
 }
 
 static netdev_tx_t el3_start_xmit(struct sk_buff *skb,
 					struct net_device *dev)
 {
-    unsigned int ioaddr = dev->base_addr;
-    struct el3_private *priv = netdev_priv(dev);
-    unsigned long flags;
+	unsigned int ioaddr = dev->base_addr;
+	struct el3_private *priv = netdev_priv(dev);
+	unsigned long flags;
 
-    netdev_dbg(dev, "el3_start_xmit(length = %ld) called, status %4.4x.\n",
+	netdev_dbg(dev, "el3_start_xmit(length = %ld) called, status %4.4x.\n",
 	       (long)skb->len, inw(ioaddr + EL3_STATUS));
 
-    spin_lock_irqsave(&priv->lock, flags);
+	spin_lock_irqsave(&priv->lock, flags);
 
-    dev->stats.tx_bytes += skb->len;
+	dev->stats.tx_bytes += skb->len;
 
-    /* Put out the doubleword header... */
-    outw(skb->len, ioaddr + TX_FIFO);
-    outw(0x00, ioaddr + TX_FIFO);
-    /* ... and the packet rounded to a doubleword. */
-    outsl(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2);
+	/* Put out the doubleword header... */
+	outw(skb->len, ioaddr + TX_FIFO);
+	outw(0x00, ioaddr + TX_FIFO);
+	/* ... and the packet rounded to a doubleword. */
+	outsl(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2);
 
-    if (inw(ioaddr + TX_FREE) <= 1536) {
-	netif_stop_queue(dev);
-	/* Interrupt us when the FIFO has room for max-sized packet. */
-	outw(SetTxThreshold + 1536, ioaddr + EL3_CMD);
-    }
+	if (inw(ioaddr + TX_FREE) <= 1536) {
+		netif_stop_queue(dev);
+		/* Interrupt us when the FIFO has room for max-sized packet. */
+		outw(SetTxThreshold + 1536, ioaddr + EL3_CMD);
+	}
 
-    pop_tx_status(dev);
-    spin_unlock_irqrestore(&priv->lock, flags);
-    dev_kfree_skb(skb);
+	pop_tx_status(dev);
+	spin_unlock_irqrestore(&priv->lock, flags);
+	dev_kfree_skb(skb);
 
-    return NETDEV_TX_OK;
+	return NETDEV_TX_OK;
 }
 
 /* The EL3 interrupt handler. */
 static irqreturn_t el3_interrupt(int irq, void *dev_id)
 {
-    struct net_device *dev = (struct net_device *) dev_id;
-    struct el3_private *lp = netdev_priv(dev);
-    unsigned int ioaddr;
-    __u16 status;
-    int i = 0, handled = 1;
+	struct net_device *dev = (struct net_device *) dev_id;
+	struct el3_private *lp = netdev_priv(dev);
+	unsigned int ioaddr;
+	__u16 status;
+	int i = 0, handled = 1;
 
-    if (!netif_device_present(dev))
-	return IRQ_NONE;
+	if (!netif_device_present(dev))
+		return IRQ_NONE;
 
-    ioaddr = dev->base_addr;
+	ioaddr = dev->base_addr;
 
-    netdev_dbg(dev, "interrupt, status %4.4x.\n", inw(ioaddr + EL3_STATUS));
+	netdev_dbg(dev, "interrupt, status %4.4x.\n", inw(ioaddr + EL3_STATUS));
 
-    spin_lock(&lp->lock);
-    while ((status = inw(ioaddr + EL3_STATUS)) &
+	spin_lock(&lp->lock);
+	while ((status = inw(ioaddr + EL3_STATUS)) &
 	(IntLatch | RxComplete | StatsFull)) {
-	if ((status & 0xe000) != 0x2000) {
-		netdev_dbg(dev, "interrupt from dead card\n");
-		handled = 0;
-		break;
-	}
-	if (status & RxComplete)
-		el3_rx(dev);
-	if (status & TxAvailable) {
-		netdev_dbg(dev, "    TX room bit was handled.\n");
-		/* There's room in the FIFO for a full-sized packet. */
-		outw(AckIntr | TxAvailable, ioaddr + EL3_CMD);
-		netif_wake_queue(dev);
-	}
-	if (status & TxComplete)
-		pop_tx_status(dev);
-	if (status & (AdapterFailure | RxEarly | StatsFull)) {
-	    /* Handle all uncommon interrupts. */
-	    if (status & StatsFull)		/* Empty statistics. */
-		update_stats(dev);
-	    if (status & RxEarly) {		/* Rx early is unused. */
-		el3_rx(dev);
-		outw(AckIntr | RxEarly, ioaddr + EL3_CMD);
-	    }
-	    if (status & AdapterFailure) {
-		u16 fifo_diag;
-		EL3WINDOW(4);
-		fifo_diag = inw(ioaddr + 4);
-		EL3WINDOW(1);
-		netdev_warn(dev, "adapter failure, FIFO diagnostic register %04x.\n",
+		if ((status & 0xe000) != 0x2000) {
+			netdev_dbg(dev, "interrupt from dead card\n");
+			handled = 0;
+			break;
+		}
+		if (status & RxComplete)
+			el3_rx(dev);
+		if (status & TxAvailable) {
+			netdev_dbg(dev, "    TX room bit was handled.\n");
+			/* There's room in the FIFO for a full-sized packet. */
+			outw(AckIntr | TxAvailable, ioaddr + EL3_CMD);
+			netif_wake_queue(dev);
+		}
+		if (status & TxComplete)
+			pop_tx_status(dev);
+		if (status & (AdapterFailure | RxEarly | StatsFull)) {
+			/* Handle all uncommon interrupts. */
+			if (status & StatsFull)		/* Empty statistics. */
+				update_stats(dev);
+			if (status & RxEarly) {
+				/* Rx early is unused. */
+				el3_rx(dev);
+				outw(AckIntr | RxEarly, ioaddr + EL3_CMD);
+			}
+			if (status & AdapterFailure) {
+				u16 fifo_diag;
+				EL3WINDOW(4);
+				fifo_diag = inw(ioaddr + 4);
+				EL3WINDOW(1);
+				netdev_warn(dev, "adapter failure, FIFO diagnostic register %04x.\n",
 			    fifo_diag);
-		if (fifo_diag & 0x0400) {
-		    /* Tx overrun */
-		    tc589_wait_for_completion(dev, TxReset);
-		    outw(TxEnable, ioaddr + EL3_CMD);
+				if (fifo_diag & 0x0400) {
+					/* Tx overrun */
+					tc589_wait_for_completion(dev, TxReset);
+					outw(TxEnable, ioaddr + EL3_CMD);
+				}
+				if (fifo_diag & 0x2000) {
+					/* Rx underrun */
+					tc589_wait_for_completion(dev, RxReset);
+					set_rx_mode(dev);
+					outw(RxEnable, ioaddr + EL3_CMD);
+				}
+				outw(AckIntr | AdapterFailure, ioaddr + EL3_CMD);
+			}
 		}
-		if (fifo_diag & 0x2000) {
-		    /* Rx underrun */
-		    tc589_wait_for_completion(dev, RxReset);
-		    set_rx_mode(dev);
-		    outw(RxEnable, ioaddr + EL3_CMD);
+		if (++i > 10) {
+			netdev_err(dev, "infinite loop in interrupt, status %4.4x.\n",
+					status);
+			/* Clear all interrupts */
+			outw(AckIntr | 0xFF, ioaddr + EL3_CMD);
+			break;
 		}
-		outw(AckIntr | AdapterFailure, ioaddr + EL3_CMD);
-	    }
+		/* Acknowledge the IRQ. */
+		outw(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD);
 	}
-	if (++i > 10) {
-		netdev_err(dev, "infinite loop in interrupt, status %4.4x.\n",
-			   status);
-		/* Clear all interrupts */
-		outw(AckIntr | 0xFF, ioaddr + EL3_CMD);
-		break;
-	}
-	/* Acknowledge the IRQ. */
-	outw(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD);
-    }
-    lp->last_irq = jiffies;
-    spin_unlock(&lp->lock);
-    netdev_dbg(dev, "exiting interrupt, status %4.4x.\n",
-	       inw(ioaddr + EL3_STATUS));
-    return IRQ_RETVAL(handled);
+	lp->last_irq = jiffies;
+	spin_unlock(&lp->lock);
+	netdev_dbg(dev, "exiting interrupt, status %4.4x.\n",
+			inw(ioaddr + EL3_STATUS));
+	return IRQ_RETVAL(handled);
 }
 
 static void media_check(unsigned long arg)
 {
-    struct net_device *dev = (struct net_device *)(arg);
-    struct el3_private *lp = netdev_priv(dev);
-    unsigned int ioaddr = dev->base_addr;
-    u16 media, errs;
-    unsigned long flags;
+	struct net_device *dev = (struct net_device *)(arg);
+	struct el3_private *lp = netdev_priv(dev);
+	unsigned int ioaddr = dev->base_addr;
+	u16 media, errs;
+	unsigned long flags;
 
-    if (!netif_device_present(dev)) goto reschedule;
+	if (!netif_device_present(dev))
+		goto reschedule;
 
-    /* Check for pending interrupt with expired latency timer: with
-       this, we can limp along even if the interrupt is blocked */
-    if ((inw(ioaddr + EL3_STATUS) & IntLatch) &&
+	/* Check for pending interrupt with expired latency timer: with
+	 * this, we can limp along even if the interrupt is blocked
+	 */
+	if ((inw(ioaddr + EL3_STATUS) & IntLatch) &&
 	(inb(ioaddr + EL3_TIMER) == 0xff)) {
-	if (!lp->fast_poll)
-		netdev_warn(dev, "interrupt(s) dropped!\n");
-
-	local_irq_save(flags);
-	el3_interrupt(dev->irq, dev);
-	local_irq_restore(flags);
-
-	lp->fast_poll = HZ;
-    }
-    if (lp->fast_poll) {
-	lp->fast_poll--;
-	lp->media.expires = jiffies + HZ/100;
-	add_timer(&lp->media);
-	return;
-    }
-
-    /* lp->lock guards the EL3 window. Window should always be 1 except
-       when the lock is held */
-    spin_lock_irqsave(&lp->lock, flags);
-    EL3WINDOW(4);
-    media = inw(ioaddr+WN4_MEDIA) & 0xc810;
-
-    /* Ignore collisions unless we've had no irq's recently */
-    if (time_before(jiffies, lp->last_irq + HZ)) {
-	media &= ~0x0010;
-    } else {
-	/* Try harder to detect carrier errors */
-	EL3WINDOW(6);
-	outw(StatsDisable, ioaddr + EL3_CMD);
-	errs = inb(ioaddr + 0);
-	outw(StatsEnable, ioaddr + EL3_CMD);
-	dev->stats.tx_carrier_errors += errs;
-	if (errs || (lp->media_status & 0x0010)) media |= 0x0010;
-    }
+		if (!lp->fast_poll)
+			netdev_warn(dev, "interrupt(s) dropped!\n");
+
+		local_irq_save(flags);
+		el3_interrupt(dev->irq, dev);
+		local_irq_restore(flags);
+
+		lp->fast_poll = HZ;
+	}
+	if (lp->fast_poll) {
+		lp->fast_poll--;
+		lp->media.expires = jiffies + HZ/100;
+		add_timer(&lp->media);
+		return;
+	}
+
+	/* lp->lock guards the EL3 window. Window should always be 1 except
+	 * when the lock is held
+	 */
+
+	spin_lock_irqsave(&lp->lock, flags);
+	EL3WINDOW(4);
+	media = inw(ioaddr+WN4_MEDIA) & 0xc810;
+
+	/* Ignore collisions unless we've had no irq's recently */
+	if (time_before(jiffies, lp->last_irq + HZ)) {
+		media &= ~0x0010;
+	} else {
+		/* Try harder to detect carrier errors */
+		EL3WINDOW(6);
+		outw(StatsDisable, ioaddr + EL3_CMD);
+		errs = inb(ioaddr + 0);
+		outw(StatsEnable, ioaddr + EL3_CMD);
+		dev->stats.tx_carrier_errors += errs;
+		if (errs || (lp->media_status & 0x0010))
+			media |= 0x0010;
+	}
 
-    if (media != lp->media_status) {
-	if ((media & lp->media_status & 0x8000) &&
-	    ((lp->media_status ^ media) & 0x0800))
+	if (media != lp->media_status) {
+		if ((media & lp->media_status & 0x8000) &&
+				((lp->media_status ^ media) & 0x0800))
 		netdev_info(dev, "%s link beat\n",
-			    (lp->media_status & 0x0800 ? "lost" : "found"));
-	else if ((media & lp->media_status & 0x4000) &&
+				(lp->media_status & 0x0800 ? "lost" : "found"));
+		else if ((media & lp->media_status & 0x4000) &&
 		 ((lp->media_status ^ media) & 0x0010))
 		netdev_info(dev, "coax cable %s\n",
-			    (lp->media_status & 0x0010 ? "ok" : "problem"));
-	if (dev->if_port == 0) {
-	    if (media & 0x8000) {
-		if (media & 0x0800)
-			netdev_info(dev, "flipped to 10baseT\n");
-		else
+				(lp->media_status & 0x0010 ? "ok" : "problem"));
+		if (dev->if_port == 0) {
+			if (media & 0x8000) {
+				if (media & 0x0800)
+					netdev_info(dev, "flipped to 10baseT\n");
+				else
 			tc589_set_xcvr(dev, 2);
-	    } else if (media & 0x4000) {
-		if (media & 0x0010)
-		    tc589_set_xcvr(dev, 1);
-		else
-		    netdev_info(dev, "flipped to 10base2\n");
-	    }
+			} else if (media & 0x4000) {
+				if (media & 0x0010)
+					tc589_set_xcvr(dev, 1);
+				else
+					netdev_info(dev, "flipped to 10base2\n");
+			}
+		}
+		lp->media_status = media;
 	}
-	lp->media_status = media;
-    }
 
-    EL3WINDOW(1);
-    spin_unlock_irqrestore(&lp->lock, flags);
+	EL3WINDOW(1);
+	spin_unlock_irqrestore(&lp->lock, flags);
 
 reschedule:
-    lp->media.expires = jiffies + HZ;
-    add_timer(&lp->media);
+	lp->media.expires = jiffies + HZ;
+	add_timer(&lp->media);
 }
 
 static struct net_device_stats *el3_get_stats(struct net_device *dev)
 {
-    struct el3_private *lp = netdev_priv(dev);
-    unsigned long flags;
-    struct pcmcia_device *link = lp->p_dev;
+	struct el3_private *lp = netdev_priv(dev);
+	unsigned long flags;
+	struct pcmcia_device *link = lp->p_dev;
 
-    if (pcmcia_dev_present(link)) {
-	spin_lock_irqsave(&lp->lock, flags);
-	update_stats(dev);
-	spin_unlock_irqrestore(&lp->lock, flags);
-    }
-    return &dev->stats;
+	if (pcmcia_dev_present(link)) {
+		spin_lock_irqsave(&lp->lock, flags);
+		update_stats(dev);
+		spin_unlock_irqrestore(&lp->lock, flags);
+	}
+	return &dev->stats;
 }
 
-/*
-  Update statistics.  We change to register window 6, so this should be run
-  single-threaded if the device is active. This is expected to be a rare
-  operation, and it's simpler for the rest of the driver to assume that
-  window 1 is always valid rather than use a special window-state variable.
-
-  Caller must hold the lock for this
+/* Update statistics.  We change to register window 6, so this should be run
+* single-threaded if the device is active. This is expected to be a rare
+* operation, and it's simpler for the rest of the driver to assume that
+* window 1 is always valid rather than use a special window-state variable.
+*
+* Caller must hold the lock for this
 */
+
 static void update_stats(struct net_device *dev)
 {
-    unsigned int ioaddr = dev->base_addr;
-
-    netdev_dbg(dev, "updating the statistics.\n");
-    /* Turn off statistics updates while reading. */
-    outw(StatsDisable, ioaddr + EL3_CMD);
-    /* Switch to the stats window, and read everything. */
-    EL3WINDOW(6);
-    dev->stats.tx_carrier_errors	+= inb(ioaddr + 0);
-    dev->stats.tx_heartbeat_errors	+= inb(ioaddr + 1);
-    /* Multiple collisions. */		inb(ioaddr + 2);
-    dev->stats.collisions		+= inb(ioaddr + 3);
-    dev->stats.tx_window_errors		+= inb(ioaddr + 4);
-    dev->stats.rx_fifo_errors		+= inb(ioaddr + 5);
-    dev->stats.tx_packets		+= inb(ioaddr + 6);
-    /* Rx packets   */			inb(ioaddr + 7);
-    /* Tx deferrals */			inb(ioaddr + 8);
-    /* Rx octets */			inw(ioaddr + 10);
-    /* Tx octets */			inw(ioaddr + 12);
-
-    /* Back to window 1, and turn statistics back on. */
-    EL3WINDOW(1);
-    outw(StatsEnable, ioaddr + EL3_CMD);
+	unsigned int ioaddr = dev->base_addr;
+
+	netdev_dbg(dev, "updating the statistics.\n");
+	/* Turn off statistics updates while reading. */
+	outw(StatsDisable, ioaddr + EL3_CMD);
+	/* Switch to the stats window, and read everything. */
+	EL3WINDOW(6);
+	dev->stats.tx_carrier_errors	+= inb(ioaddr + 0);
+	dev->stats.tx_heartbeat_errors	+= inb(ioaddr + 1);
+	/* Multiple collisions. */
+	inb(ioaddr + 2);
+	dev->stats.collisions		+= inb(ioaddr + 3);
+	dev->stats.tx_window_errors		+= inb(ioaddr + 4);
+	dev->stats.rx_fifo_errors		+= inb(ioaddr + 5);
+	dev->stats.tx_packets		+= inb(ioaddr + 6);
+	/* Rx packets   */
+	inb(ioaddr + 7);
+	/* Tx deferrals */
+	inb(ioaddr + 8);
+	/* Rx octets */
+	inw(ioaddr + 10);
+	/* Tx octets */
+	inw(ioaddr + 12);
+
+	/* Back to window 1, and turn statistics back on. */
+	EL3WINDOW(1);
+	outw(StatsEnable, ioaddr + EL3_CMD);
 }
 
 static int el3_rx(struct net_device *dev)
 {
-    unsigned int ioaddr = dev->base_addr;
-    int worklimit = 32;
-    short rx_status;
+	unsigned int ioaddr = dev->base_addr;
+	int worklimit = 32;
+	short rx_status;
 
-    netdev_dbg(dev, "in rx_packet(), status %4.4x, rx_status %4.4x.\n",
+	netdev_dbg(dev, "in rx_packet(), status %4.4x, rx_status %4.4x.\n",
 	       inw(ioaddr+EL3_STATUS), inw(ioaddr+RX_STATUS));
-    while (!((rx_status = inw(ioaddr + RX_STATUS)) & 0x8000) &&
+	while (!((rx_status = inw(ioaddr + RX_STATUS)) & 0x8000) &&
 		    worklimit > 0) {
-	worklimit--;
-	if (rx_status & 0x4000) { /* Error, update stats. */
-	    short error = rx_status & 0x3800;
-	    dev->stats.rx_errors++;
-	    switch (error) {
-	    case 0x0000:	dev->stats.rx_over_errors++; break;
-	    case 0x0800:	dev->stats.rx_length_errors++; break;
-	    case 0x1000:	dev->stats.rx_frame_errors++; break;
-	    case 0x1800:	dev->stats.rx_length_errors++; break;
-	    case 0x2000:	dev->stats.rx_frame_errors++; break;
-	    case 0x2800:	dev->stats.rx_crc_errors++; break;
-	    }
-	} else {
-	    short pkt_len = rx_status & 0x7ff;
-	    struct sk_buff *skb;
-
-	    skb = netdev_alloc_skb(dev, pkt_len + 5);
-
-	    netdev_dbg(dev, "    Receiving packet size %d status %4.4x.\n",
+		worklimit--;
+		if (rx_status & 0x4000) { /* Error, update stats. */
+			short error = rx_status & 0x3800;
+			dev->stats.rx_errors++;
+			switch (error) {
+			case 0x0000:
+				dev->stats.rx_over_errors++;
+				break;
+			case 0x0800:
+				dev->stats.rx_length_errors++;
+				break;
+			case 0x1000:
+				dev->stats.rx_frame_errors++;
+				break;
+			case 0x1800:
+				dev->stats.rx_length_errors++;
+				break;
+			case 0x2000:
+				dev->stats.rx_frame_errors++;
+				break;
+			case 0x2800:
+				dev->stats.rx_crc_errors++;
+				break;
+			}
+		} else {
+			short pkt_len = rx_status & 0x7ff;
+			struct sk_buff *skb;
+
+			skb = netdev_alloc_skb(dev, pkt_len + 5);
+
+			netdev_dbg(dev, "    Receiving packet size %d status %4.4x.\n",
 		       pkt_len, rx_status);
-	    if (skb != NULL) {
-		skb_reserve(skb, 2);
-		insl(ioaddr+RX_FIFO, skb_put(skb, pkt_len),
+			if (skb != NULL) {
+				skb_reserve(skb, 2);
+				insl(ioaddr+RX_FIFO, skb_put(skb, pkt_len),
 			(pkt_len+3)>>2);
-		skb->protocol = eth_type_trans(skb, dev);
-		netif_rx(skb);
-		dev->stats.rx_packets++;
-		dev->stats.rx_bytes += pkt_len;
-	    } else {
-		netdev_dbg(dev, "couldn't allocate a sk_buff of size %d.\n",
+				skb->protocol = eth_type_trans(skb, dev);
+				netif_rx(skb);
+				dev->stats.rx_packets++;
+				dev->stats.rx_bytes += pkt_len;
+			} else {
+				netdev_dbg(dev, "couldn't allocate a sk_buff of size %d.\n",
 			   pkt_len);
-		dev->stats.rx_dropped++;
-	    }
+				dev->stats.rx_dropped++;
+			}
+		}
+		/* Pop the top of the Rx FIFO */
+		tc589_wait_for_completion(dev, RxDiscard);
 	}
-	/* Pop the top of the Rx FIFO */
-	tc589_wait_for_completion(dev, RxDiscard);
-    }
-    if (worklimit == 0)
-	netdev_warn(dev, "too much work in el3_rx!\n");
-    return 0;
+	if (worklimit == 0)
+		netdev_warn(dev, "too much work in el3_rx!\n");
+	return 0;
 }
 
 static void set_rx_mode(struct net_device *dev)
 {
-    unsigned int ioaddr = dev->base_addr;
-    u16 opts = SetRxFilter | RxStation | RxBroadcast;
-
-    if (dev->flags & IFF_PROMISC)
-	opts |= RxMulticast | RxProm;
-    else if (!netdev_mc_empty(dev) || (dev->flags & IFF_ALLMULTI))
-	opts |= RxMulticast;
-    outw(opts, ioaddr + EL3_CMD);
+	unsigned int ioaddr = dev->base_addr;
+	u16 opts = SetRxFilter | RxStation | RxBroadcast;
+
+	if (dev->flags & IFF_PROMISC)
+		opts |= RxMulticast | RxProm;
+	else if (!netdev_mc_empty(dev) || (dev->flags & IFF_ALLMULTI))
+		opts |= RxMulticast;
+	outw(opts, ioaddr + EL3_CMD);
 }
 
 static void set_multicast_list(struct net_device *dev)
@@ -867,44 +908,44 @@ static void set_multicast_list(struct net_device *dev)
 
 static int el3_close(struct net_device *dev)
 {
-    struct el3_private *lp = netdev_priv(dev);
-    struct pcmcia_device *link = lp->p_dev;
-    unsigned int ioaddr = dev->base_addr;
-
-    dev_dbg(&link->dev, "%s: shutting down ethercard.\n", dev->name);
+	struct el3_private *lp = netdev_priv(dev);
+	struct pcmcia_device *link = lp->p_dev;
+	unsigned int ioaddr = dev->base_addr;
+
+	dev_dbg(&link->dev, "%s: shutting down ethercard.\n", dev->name);
+
+	if (pcmcia_dev_present(link)) {
+		/* Turn off statistics ASAP.  We update dev->stats below. */
+		outw(StatsDisable, ioaddr + EL3_CMD);
+
+		/* Disable the receiver and transmitter. */
+		outw(RxDisable, ioaddr + EL3_CMD);
+		outw(TxDisable, ioaddr + EL3_CMD);
+
+		if (dev->if_port == 2)
+			/* Turn off thinnet power.  Green! */
+			outw(StopCoax, ioaddr + EL3_CMD);
+		else if (dev->if_port == 1) {
+			/* Disable link beat and jabber */
+			EL3WINDOW(4);
+			outw(0, ioaddr + WN4_MEDIA);
+		}
 
-    if (pcmcia_dev_present(link)) {
-	/* Turn off statistics ASAP.  We update dev->stats below. */
-	outw(StatsDisable, ioaddr + EL3_CMD);
+		/* Switching back to window 0 disables the IRQ. */
+		EL3WINDOW(0);
+		/* But we explicitly zero the IRQ line select anyway. */
+		outw(0x0f00, ioaddr + WN0_IRQ);
 
-	/* Disable the receiver and transmitter. */
-	outw(RxDisable, ioaddr + EL3_CMD);
-	outw(TxDisable, ioaddr + EL3_CMD);
-
-	if (dev->if_port == 2)
-	    /* Turn off thinnet power.  Green! */
-	    outw(StopCoax, ioaddr + EL3_CMD);
-	else if (dev->if_port == 1) {
-	    /* Disable link beat and jabber */
-	    EL3WINDOW(4);
-	    outw(0, ioaddr + WN4_MEDIA);
+		/* Check if the card still exists */
+		if ((inw(ioaddr+EL3_STATUS) & 0xe000) == 0x2000)
+			update_stats(dev);
 	}
 
-	/* Switching back to window 0 disables the IRQ. */
-	EL3WINDOW(0);
-	/* But we explicitly zero the IRQ line select anyway. */
-	outw(0x0f00, ioaddr + WN0_IRQ);
-
-	/* Check if the card still exists */
-	if ((inw(ioaddr+EL3_STATUS) & 0xe000) == 0x2000)
-	    update_stats(dev);
-    }
-
-    link->open--;
-    netif_stop_queue(dev);
-    del_timer_sync(&lp->media);
+	link->open--;
+	netif_stop_queue(dev);
+	del_timer_sync(&lp->media);
 
-    return 0;
+	return 0;
 }
 
 static const struct pcmcia_device_id tc589_ids[] = {
-- 
cgit v1.2.2


From b356e978e92fccd17a3e4620a4821bdbfb706c1a Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Date: Tue, 18 Feb 2014 03:12:43 +0300
Subject: sh_eth: add device tree support

Add support of the device tree probing for the Renesas SH-Mobile SoCs
documenting the device tree binding as necessary.

This work is loosely based on the original patch by Nobuhiro Iwamatsu
<nobuhiro.iwamatsu.yj@renesas.com>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/renesas/sh_eth.c | 69 +++++++++++++++++++++++++++++++++--
 1 file changed, 66 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index 88b40b514cb2..b1e6554f44bc 100644
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -1,8 +1,8 @@
 /*  SuperH Ethernet device driver
  *
  *  Copyright (C) 2006-2012 Nobuhiro Iwamatsu
- *  Copyright (C) 2008-2013 Renesas Solutions Corp.
- *  Copyright (C) 2013 Cogent Embedded, Inc.
+ *  Copyright (C) 2008-2014 Renesas Solutions Corp.
+ *  Copyright (C) 2013-2014 Cogent Embedded, Inc.
  *
  *  This program is free software; you can redistribute it and/or modify it
  *  under the terms and conditions of the GNU General Public License,
@@ -27,6 +27,10 @@
 #include <linux/platform_device.h>
 #include <linux/mdio-bitbang.h>
 #include <linux/netdevice.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/of_net.h>
 #include <linux/phy.h>
 #include <linux/cache.h>
 #include <linux/io.h>
@@ -2710,6 +2714,54 @@ static const struct net_device_ops sh_eth_netdev_ops_tsu = {
 	.ndo_change_mtu		= eth_change_mtu,
 };
 
+#ifdef CONFIG_OF
+static struct sh_eth_plat_data *sh_eth_parse_dt(struct device *dev)
+{
+	struct device_node *np = dev->of_node;
+	struct sh_eth_plat_data *pdata;
+	struct device_node *phy;
+	const char *mac_addr;
+
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return NULL;
+
+	pdata->phy_interface = of_get_phy_mode(np);
+
+	phy = of_parse_phandle(np, "phy-handle", 0);
+	if (of_property_read_u32(phy, "reg", &pdata->phy))
+		return NULL;
+	pdata->phy_irq = irq_of_parse_and_map(phy, 0);
+
+	mac_addr = of_get_mac_address(np);
+	if (mac_addr)
+		memcpy(pdata->mac_addr, mac_addr, ETH_ALEN);
+
+	pdata->no_ether_link =
+		of_property_read_bool(np, "renesas,no-ether-link");
+	pdata->ether_link_active_low =
+		of_property_read_bool(np, "renesas,ether-link-active-low");
+
+	return pdata;
+}
+
+static const struct of_device_id sh_eth_match_table[] = {
+	{ .compatible = "renesas,gether-r8a7740", .data = &r8a7740_data },
+	{ .compatible = "renesas,ether-r8a7778", .data = &r8a777x_data },
+	{ .compatible = "renesas,ether-r8a7779", .data = &r8a777x_data },
+	{ .compatible = "renesas,ether-r8a7790", .data = &r8a779x_data },
+	{ .compatible = "renesas,ether-r8a7791", .data = &r8a779x_data },
+	{ .compatible = "renesas,ether-r7s72100", .data = &r7s72100_data },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sh_eth_match_table);
+#else
+static inline struct sh_eth_plat_data *sh_eth_parse_dt(struct device *dev)
+{
+	return NULL;
+}
+#endif
+
 static int sh_eth_drv_probe(struct platform_device *pdev)
 {
 	int ret, devno = 0;
@@ -2763,6 +2815,8 @@ static int sh_eth_drv_probe(struct platform_device *pdev)
 	pm_runtime_enable(&pdev->dev);
 	pm_runtime_resume(&pdev->dev);
 
+	if (pdev->dev.of_node)
+		pd = sh_eth_parse_dt(&pdev->dev);
 	if (!pd) {
 		dev_err(&pdev->dev, "no platform data\n");
 		ret = -EINVAL;
@@ -2778,7 +2832,15 @@ static int sh_eth_drv_probe(struct platform_device *pdev)
 	mdp->ether_link_active_low = pd->ether_link_active_low;
 
 	/* set cpu data */
-	mdp->cd = (struct sh_eth_cpu_data *)id->driver_data;
+	if (id) {
+		mdp->cd = (struct sh_eth_cpu_data *)id->driver_data;
+	} else	{
+		const struct of_device_id *match;
+
+		match = of_match_device(of_match_ptr(sh_eth_match_table),
+					&pdev->dev);
+		mdp->cd = (struct sh_eth_cpu_data *)match->data;
+	}
 	mdp->reg_offset = sh_eth_get_register_offset(mdp->cd->register_type);
 	sh_eth_set_default_cpu_data(mdp->cd);
 
@@ -2920,6 +2982,7 @@ static struct platform_driver sh_eth_driver = {
 	.driver = {
 		   .name = CARDNAME,
 		   .pm = SH_ETH_PM_OPS,
+		   .of_match_table = of_match_ptr(sh_eth_match_table),
 	},
 };
 
-- 
cgit v1.2.2


From f7b12606b5de323a2bb5ca1696558efde8f25441 Mon Sep 17 00:00:00 2001
From: Jiri Pirko <jiri@resnulli.us>
Date: Tue, 18 Feb 2014 20:53:18 +0100
Subject: rtnl: make ifla_policy static

The only place this is used outside rtnetlink.c is veth. So provide
wrapper function for this usage.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/veth.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/veth.c b/drivers/net/veth.c
index 91c33c1d3c9c..34b52638e12d 100644
--- a/drivers/net/veth.c
+++ b/drivers/net/veth.c
@@ -14,6 +14,7 @@
 #include <linux/etherdevice.h>
 #include <linux/u64_stats_sync.h>
 
+#include <net/rtnetlink.h>
 #include <net/dst.h>
 #include <net/xfrm.h>
 #include <linux/veth.h>
@@ -323,10 +324,9 @@ static int veth_newlink(struct net *src_net, struct net_device *dev,
 
 		nla_peer = data[VETH_INFO_PEER];
 		ifmp = nla_data(nla_peer);
-		err = nla_parse(peer_tb, IFLA_MAX,
-				nla_data(nla_peer) + sizeof(struct ifinfomsg),
-				nla_len(nla_peer) - sizeof(struct ifinfomsg),
-				ifla_policy);
+		err = rtnl_nla_parse_ifla(peer_tb,
+					  nla_data(nla_peer) + sizeof(struct ifinfomsg),
+					  nla_len(nla_peer) - sizeof(struct ifinfomsg));
 		if (err < 0)
 			return err;
 
-- 
cgit v1.2.2


From 60e2e8b399ca58bf1954d36aee2cc78f923851c9 Mon Sep 17 00:00:00 2001
From: Don Fry <pcnet32@frontier.com>
Date: Mon, 17 Feb 2014 20:57:46 -0800
Subject: pcnet32: fix reallocation error

pcnet32_realloc_rx_ring() only worked on the first log2 number of
entries in the receive ring instead of the all the entries.
Replaced "1 << size" with more descriptive variable.
This is my original bug from 2006.  Found while testing another problem.
Tested on 79C972 and 79C976.

Signed-off-by: Don Fry <pcnet32@frontier.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/amd/pcnet32.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/amd/pcnet32.c b/drivers/net/ethernet/amd/pcnet32.c
index 9339cccfe05a..25cd04a78eec 100644
--- a/drivers/net/ethernet/amd/pcnet32.c
+++ b/drivers/net/ethernet/amd/pcnet32.c
@@ -549,35 +549,36 @@ static void pcnet32_realloc_rx_ring(struct net_device *dev,
 	struct pcnet32_rx_head *new_rx_ring;
 	struct sk_buff **new_skb_list;
 	int new, overlap;
+	unsigned int entries = 1 << size;
 
 	new_rx_ring = pci_alloc_consistent(lp->pci_dev,
 					   sizeof(struct pcnet32_rx_head) *
-					   (1 << size),
+					   entries,
 					   &new_ring_dma_addr);
 	if (new_rx_ring == NULL) {
 		netif_err(lp, drv, dev, "Consistent memory allocation failed\n");
 		return;
 	}
-	memset(new_rx_ring, 0, sizeof(struct pcnet32_rx_head) * (1 << size));
+	memset(new_rx_ring, 0, sizeof(struct pcnet32_rx_head) * entries);
 
-	new_dma_addr_list = kcalloc(1 << size, sizeof(dma_addr_t), GFP_ATOMIC);
+	new_dma_addr_list = kcalloc(entries, sizeof(dma_addr_t), GFP_ATOMIC);
 	if (!new_dma_addr_list)
 		goto free_new_rx_ring;
 
-	new_skb_list = kcalloc(1 << size, sizeof(struct sk_buff *),
+	new_skb_list = kcalloc(entries, sizeof(struct sk_buff *),
 			       GFP_ATOMIC);
 	if (!new_skb_list)
 		goto free_new_lists;
 
 	/* first copy the current receive buffers */
-	overlap = min(size, lp->rx_ring_size);
+	overlap = min(entries, lp->rx_ring_size);
 	for (new = 0; new < overlap; new++) {
 		new_rx_ring[new] = lp->rx_ring[new];
 		new_dma_addr_list[new] = lp->rx_dma_addr[new];
 		new_skb_list[new] = lp->rx_skbuff[new];
 	}
 	/* now allocate any new buffers needed */
-	for (; new < size; new++) {
+	for (; new < entries; new++) {
 		struct sk_buff *rx_skbuff;
 		new_skb_list[new] = netdev_alloc_skb(dev, PKT_BUF_SKB);
 		rx_skbuff = new_skb_list[new];
@@ -612,7 +613,7 @@ static void pcnet32_realloc_rx_ring(struct net_device *dev,
 			    lp->rx_ring_size, lp->rx_ring,
 			    lp->rx_ring_dma_addr);
 
-	lp->rx_ring_size = (1 << size);
+	lp->rx_ring_size = entries;
 	lp->rx_mod_mask = lp->rx_ring_size - 1;
 	lp->rx_len_bits = (size << 4);
 	lp->rx_ring = new_rx_ring;
@@ -634,8 +635,7 @@ free_new_lists:
 	kfree(new_dma_addr_list);
 free_new_rx_ring:
 	pci_free_consistent(lp->pci_dev,
-			    sizeof(struct pcnet32_rx_head) *
-			    (1 << size),
+			    sizeof(struct pcnet32_rx_head) * entries,
 			    new_rx_ring,
 			    new_ring_dma_addr);
 }
-- 
cgit v1.2.2


From 4cc5c475797ae9152738d8ea53131576083e4d5b Mon Sep 17 00:00:00 2001
From: Don Fry <pcnet32@frontier.com>
Date: Mon, 17 Feb 2014 20:57:59 -0800
Subject: pcnet32: add missing check for pci_dma_mapping_error

The pci_map_single calls never checked for error. Add error checking
as requested by someone last year.  Tested on 79c972.

Signed-off-by: Don Fry <pcnet32@frontier.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/amd/pcnet32.c | 108 +++++++++++++++++++++++++++----------
 1 file changed, 81 insertions(+), 27 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/amd/pcnet32.c b/drivers/net/ethernet/amd/pcnet32.c
index 25cd04a78eec..2ae00ed83afa 100644
--- a/drivers/net/ethernet/amd/pcnet32.c
+++ b/drivers/net/ethernet/amd/pcnet32.c
@@ -565,8 +565,7 @@ static void pcnet32_realloc_rx_ring(struct net_device *dev,
 	if (!new_dma_addr_list)
 		goto free_new_rx_ring;
 
-	new_skb_list = kcalloc(entries, sizeof(struct sk_buff *),
-			       GFP_ATOMIC);
+	new_skb_list = kcalloc(entries, sizeof(struct sk_buff *), GFP_ATOMIC);
 	if (!new_skb_list)
 		goto free_new_lists;
 
@@ -593,6 +592,13 @@ static void pcnet32_realloc_rx_ring(struct net_device *dev,
 		new_dma_addr_list[new] =
 			    pci_map_single(lp->pci_dev, rx_skbuff->data,
 					   PKT_BUF_SIZE, PCI_DMA_FROMDEVICE);
+		if (pci_dma_mapping_error(lp->pci_dev,
+					  new_dma_addr_list[new])) {
+			netif_err(lp, drv, dev, "%s dma mapping failed\n",
+				  __func__);
+			dev_kfree_skb(new_skb_list[new]);
+			goto free_all_new;
+		}
 		new_rx_ring[new].base = cpu_to_le32(new_dma_addr_list[new]);
 		new_rx_ring[new].buf_length = cpu_to_le16(NEG_BUF_SIZE);
 		new_rx_ring[new].status = cpu_to_le16(0x8000);
@@ -600,8 +606,12 @@ static void pcnet32_realloc_rx_ring(struct net_device *dev,
 	/* and free any unneeded buffers */
 	for (; new < lp->rx_ring_size; new++) {
 		if (lp->rx_skbuff[new]) {
-			pci_unmap_single(lp->pci_dev, lp->rx_dma_addr[new],
-					 PKT_BUF_SIZE, PCI_DMA_FROMDEVICE);
+			if (!pci_dma_mapping_error(lp->pci_dev,
+						   lp->rx_dma_addr[new]))
+				pci_unmap_single(lp->pci_dev,
+						 lp->rx_dma_addr[new],
+						 PKT_BUF_SIZE,
+						 PCI_DMA_FROMDEVICE);
 			dev_kfree_skb(lp->rx_skbuff[new]);
 		}
 	}
@@ -625,8 +635,12 @@ static void pcnet32_realloc_rx_ring(struct net_device *dev,
 free_all_new:
 	while (--new >= lp->rx_ring_size) {
 		if (new_skb_list[new]) {
-			pci_unmap_single(lp->pci_dev, new_dma_addr_list[new],
-					 PKT_BUF_SIZE, PCI_DMA_FROMDEVICE);
+			if (!pci_dma_mapping_error(lp->pci_dev,
+						   new_dma_addr_list[new]))
+				pci_unmap_single(lp->pci_dev,
+						 new_dma_addr_list[new],
+						 PKT_BUF_SIZE,
+						 PCI_DMA_FROMDEVICE);
 			dev_kfree_skb(new_skb_list[new]);
 		}
 	}
@@ -650,8 +664,12 @@ static void pcnet32_purge_rx_ring(struct net_device *dev)
 		lp->rx_ring[i].status = 0;	/* CPU owns buffer */
 		wmb();		/* Make sure adapter sees owner change */
 		if (lp->rx_skbuff[i]) {
-			pci_unmap_single(lp->pci_dev, lp->rx_dma_addr[i],
-					 PKT_BUF_SIZE, PCI_DMA_FROMDEVICE);
+			if (!pci_dma_mapping_error(lp->pci_dev,
+						   lp->rx_dma_addr[i]))
+				pci_unmap_single(lp->pci_dev,
+						 lp->rx_dma_addr[i],
+						 PKT_BUF_SIZE,
+						 PCI_DMA_FROMDEVICE);
 			dev_kfree_skb_any(lp->rx_skbuff[i]);
 		}
 		lp->rx_skbuff[i] = NULL;
@@ -930,6 +948,12 @@ static int pcnet32_loopback_test(struct net_device *dev, uint64_t * data1)
 		lp->tx_dma_addr[x] =
 			pci_map_single(lp->pci_dev, skb->data, skb->len,
 				       PCI_DMA_TODEVICE);
+		if (pci_dma_mapping_error(lp->pci_dev, lp->tx_dma_addr[x])) {
+			netif_printk(lp, hw, KERN_DEBUG, dev,
+				     "DMA mapping error at line: %d!\n",
+				     __LINE__);
+			goto clean_up;
+		}
 		lp->tx_ring[x].base = cpu_to_le32(lp->tx_dma_addr[x]);
 		wmb();	/* Make sure owner changes after all others are visible */
 		lp->tx_ring[x].status = cpu_to_le16(status);
@@ -1142,24 +1166,36 @@ static void pcnet32_rx_entry(struct net_device *dev,
 
 	if (pkt_len > rx_copybreak) {
 		struct sk_buff *newskb;
+		dma_addr_t new_dma_addr;
 
 		newskb = netdev_alloc_skb(dev, PKT_BUF_SKB);
+		/*
+		 * map the new buffer, if mapping fails, drop the packet and
+		 * reuse the old buffer
+		 */
 		if (newskb) {
 			skb_reserve(newskb, NET_IP_ALIGN);
-			skb = lp->rx_skbuff[entry];
-			pci_unmap_single(lp->pci_dev,
-					 lp->rx_dma_addr[entry],
-					 PKT_BUF_SIZE,
-					 PCI_DMA_FROMDEVICE);
-			skb_put(skb, pkt_len);
-			lp->rx_skbuff[entry] = newskb;
-			lp->rx_dma_addr[entry] =
-					    pci_map_single(lp->pci_dev,
-							   newskb->data,
-							   PKT_BUF_SIZE,
-							   PCI_DMA_FROMDEVICE);
-			rxp->base = cpu_to_le32(lp->rx_dma_addr[entry]);
-			rx_in_place = 1;
+			new_dma_addr = pci_map_single(lp->pci_dev,
+						      newskb->data,
+						      PKT_BUF_SIZE,
+						      PCI_DMA_FROMDEVICE);
+			if (pci_dma_mapping_error(lp->pci_dev, new_dma_addr)) {
+				netif_err(lp, rx_err, dev,
+					  "DMA mapping error.\n");
+				dev_kfree_skb(newskb);
+				skb = NULL;
+			} else {
+				skb = lp->rx_skbuff[entry];
+				pci_unmap_single(lp->pci_dev,
+						 lp->rx_dma_addr[entry],
+						 PKT_BUF_SIZE,
+						 PCI_DMA_FROMDEVICE);
+				skb_put(skb, pkt_len);
+				lp->rx_skbuff[entry] = newskb;
+				lp->rx_dma_addr[entry] = new_dma_addr;
+				rxp->base = cpu_to_le32(new_dma_addr);
+				rx_in_place = 1;
+			}
 		} else
 			skb = NULL;
 	} else
@@ -2229,9 +2265,12 @@ static void pcnet32_purge_tx_ring(struct net_device *dev)
 		lp->tx_ring[i].status = 0;	/* CPU owns buffer */
 		wmb();		/* Make sure adapter sees owner change */
 		if (lp->tx_skbuff[i]) {
-			pci_unmap_single(lp->pci_dev, lp->tx_dma_addr[i],
-					 lp->tx_skbuff[i]->len,
-					 PCI_DMA_TODEVICE);
+			if (!pci_dma_mapping_error(lp->pci_dev,
+						   lp->tx_dma_addr[i]))
+				pci_unmap_single(lp->pci_dev,
+						 lp->tx_dma_addr[i],
+						 lp->tx_skbuff[i]->len,
+						 PCI_DMA_TODEVICE);
 			dev_kfree_skb_any(lp->tx_skbuff[i]);
 		}
 		lp->tx_skbuff[i] = NULL;
@@ -2264,10 +2303,19 @@ static int pcnet32_init_ring(struct net_device *dev)
 		}
 
 		rmb();
-		if (lp->rx_dma_addr[i] == 0)
+		if (lp->rx_dma_addr[i] == 0) {
 			lp->rx_dma_addr[i] =
 			    pci_map_single(lp->pci_dev, rx_skbuff->data,
 					   PKT_BUF_SIZE, PCI_DMA_FROMDEVICE);
+			if (pci_dma_mapping_error(lp->pci_dev,
+						  lp->rx_dma_addr[i])) {
+				/* there is not much we can do at this point */
+				netif_err(lp, drv, dev,
+					  "%s pci dma mapping error\n",
+					  __func__);
+				return -1;
+			}
+		}
 		lp->rx_ring[i].base = cpu_to_le32(lp->rx_dma_addr[i]);
 		lp->rx_ring[i].buf_length = cpu_to_le16(NEG_BUF_SIZE);
 		wmb();		/* Make sure owner changes after all others are visible */
@@ -2397,9 +2445,14 @@ static netdev_tx_t pcnet32_start_xmit(struct sk_buff *skb,
 
 	lp->tx_ring[entry].misc = 0x00000000;
 
-	lp->tx_skbuff[entry] = skb;
 	lp->tx_dma_addr[entry] =
 	    pci_map_single(lp->pci_dev, skb->data, skb->len, PCI_DMA_TODEVICE);
+	if (pci_dma_mapping_error(lp->pci_dev, lp->tx_dma_addr[entry])) {
+		dev_kfree_skb(skb);
+		dev->stats.tx_dropped++;
+		goto drop_packet;
+	}
+	lp->tx_skbuff[entry] = skb;
 	lp->tx_ring[entry].base = cpu_to_le32(lp->tx_dma_addr[entry]);
 	wmb();			/* Make sure owner changes after all others are visible */
 	lp->tx_ring[entry].status = cpu_to_le16(status);
@@ -2414,6 +2467,7 @@ static netdev_tx_t pcnet32_start_xmit(struct sk_buff *skb,
 		lp->tx_full = 1;
 		netif_stop_queue(dev);
 	}
+drop_packet:
 	spin_unlock_irqrestore(&lp->lock, flags);
 	return NETDEV_TX_OK;
 }
-- 
cgit v1.2.2


From 2a7c183bc7ae798915c4bc58d3bf413fe466705b Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Tue, 18 Feb 2014 09:42:45 -0800
Subject: bonding: More use of ether_addr_copy

It's smaller and faster for some architectures.

Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Ding Tianhong <dingtianhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_3ad.c  | 4 ++--
 drivers/net/bonding/bond_alb.c  | 5 ++---
 drivers/net/bonding/bond_main.c | 6 +++---
 3 files changed, 7 insertions(+), 8 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index e362ff720e6b..87348411bafe 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -2384,8 +2384,8 @@ int __bond_3ad_get_active_agg_info(struct bonding *bond,
 		ad_info->ports = aggregator->num_of_ports;
 		ad_info->actor_key = aggregator->actor_oper_aggregator_key;
 		ad_info->partner_key = aggregator->partner_oper_aggregator_key;
-		memcpy(ad_info->partner_system,
-		       aggregator->partner_system.mac_addr_value, ETH_ALEN);
+		ether_addr_copy(ad_info->partner_system,
+				aggregator->partner_system.mac_addr_value);
 		return 0;
 	}
 
diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index 538913e62715..97a43a20dae8 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -1449,9 +1449,8 @@ int bond_alb_xmit(struct sk_buff *skb, struct net_device *bond_dev)
 
 	if (tx_slave && SLAVE_IS_OK(tx_slave)) {
 		if (tx_slave != rcu_dereference(bond->curr_active_slave)) {
-			memcpy(eth_data->h_source,
-			       tx_slave->dev->dev_addr,
-			       ETH_ALEN);
+			ether_addr_copy(eth_data->h_source,
+					tx_slave->dev->dev_addr);
 		}
 
 		bond_dev_queue_xmit(bond, skb, tx_slave->dev);
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index afae7cab5cf6..71edf03544aa 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -674,8 +674,8 @@ static void bond_do_fail_over_mac(struct bonding *bond,
 
 		if (old_active) {
 			ether_addr_copy(tmp_mac, new_active->dev->dev_addr);
-			memcpy(saddr.sa_data, old_active->dev->dev_addr,
-			       ETH_ALEN);
+			ether_addr_copy(saddr.sa_data,
+					old_active->dev->dev_addr);
 			saddr.sa_family = new_active->dev->type;
 		} else {
 			ether_addr_copy(saddr.sa_data, bond->dev->dev_addr);
@@ -1139,7 +1139,7 @@ static rx_handler_result_t bond_handle_frame(struct sk_buff **pskb)
 			kfree_skb(skb);
 			return RX_HANDLER_CONSUMED;
 		}
-		memcpy(eth_hdr(skb)->h_dest, bond->dev->dev_addr, ETH_ALEN);
+		ether_addr_copy(eth_hdr(skb)->h_dest, bond->dev->dev_addr);
 	}
 
 	return ret;
-- 
cgit v1.2.2


From 157550fbbbf932970b231394b1069f50104824c5 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Tue, 18 Feb 2014 09:42:46 -0800
Subject: bonding: Remove unnecessary else

It's unnecessary and less readable after a clause ending in a goto.

Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Ding Tianhong <dingtianhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_alb.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index 97a43a20dae8..aaeeacf767f2 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -1455,12 +1455,12 @@ int bond_alb_xmit(struct sk_buff *skb, struct net_device *bond_dev)
 
 		bond_dev_queue_xmit(bond, skb, tx_slave->dev);
 		goto out;
-	} else {
-		if (tx_slave) {
-			_lock_tx_hashtbl(bond);
-			__tlb_clear_slave(bond, tx_slave, 0);
-			_unlock_tx_hashtbl(bond);
-		}
+	}
+
+	if (tx_slave) {
+		_lock_tx_hashtbl(bond);
+		__tlb_clear_slave(bond, tx_slave, 0);
+		_unlock_tx_hashtbl(bond);
 	}
 
 	/* no suitable interface, frame not sent */
-- 
cgit v1.2.2


From 21f374c6cfbf98c1efceee0b528ce784d215935c Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Tue, 18 Feb 2014 09:42:47 -0800
Subject: bonding: Invert test

Make the error case return early.
Make the normal return at the bottom of the function.
Reduces indent for readability.

Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Ding Tianhong <dingtianhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_3ad.c | 21 ++++++++++-----------
 1 file changed, 10 insertions(+), 11 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index 87348411bafe..f04f3625e944 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -2379,17 +2379,16 @@ int __bond_3ad_get_active_agg_info(struct bonding *bond,
 		}
 	}
 
-	if (aggregator) {
-		ad_info->aggregator_id = aggregator->aggregator_identifier;
-		ad_info->ports = aggregator->num_of_ports;
-		ad_info->actor_key = aggregator->actor_oper_aggregator_key;
-		ad_info->partner_key = aggregator->partner_oper_aggregator_key;
-		ether_addr_copy(ad_info->partner_system,
-				aggregator->partner_system.mac_addr_value);
-		return 0;
-	}
-
-	return -1;
+	if (!aggregator)
+		return -1;
+
+	ad_info->aggregator_id = aggregator->aggregator_identifier;
+	ad_info->ports = aggregator->num_of_ports;
+	ad_info->actor_key = aggregator->actor_oper_aggregator_key;
+	ad_info->partner_key = aggregator->partner_oper_aggregator_key;
+	ether_addr_copy(ad_info->partner_system,
+			aggregator->partner_system.mac_addr_value);
+	return 0;
 }
 
 /* Wrapper used to hold bond->lock so no slave manipulation can occur */
-- 
cgit v1.2.2


From a1eabb0178bcef8eee6286bc646b66e23f4f77ea Mon Sep 17 00:00:00 2001
From: Haiyang Zhang <haiyangz@microsoft.com>
Date: Wed, 19 Feb 2014 15:49:45 -0800
Subject: hyperv: Add latest NetVSP versions to auto negotiation

It auto negotiates the highest NetVSP version supported by both guest and host.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/hyperv/hyperv_net.h | 53 +++++++++++++++++++++++++++++++++++++++++
 drivers/net/hyperv/netvsc.c     | 25 ++++++++++++-------
 drivers/net/hyperv/netvsc_drv.c |  2 +-
 3 files changed, 70 insertions(+), 10 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/hyperv/hyperv_net.h b/drivers/net/hyperv/hyperv_net.h
index 01a16ea77a5a..39fc230f5c20 100644
--- a/drivers/net/hyperv/hyperv_net.h
+++ b/drivers/net/hyperv/hyperv_net.h
@@ -139,6 +139,8 @@ int rndis_filter_set_device_mac(struct hv_device *hdev, char *mac);
 
 #define NVSP_PROTOCOL_VERSION_1		2
 #define NVSP_PROTOCOL_VERSION_2		0x30002
+#define NVSP_PROTOCOL_VERSION_4		0x40000
+#define NVSP_PROTOCOL_VERSION_5		0x50000
 
 enum {
 	NVSP_MSG_TYPE_NONE = 0,
@@ -193,6 +195,23 @@ enum {
 
 	NVSP_MSG2_TYPE_ALLOC_CHIMNEY_HANDLE,
 	NVSP_MSG2_TYPE_ALLOC_CHIMNEY_HANDLE_COMP,
+
+	NVSP_MSG2_MAX = NVSP_MSG2_TYPE_ALLOC_CHIMNEY_HANDLE_COMP,
+
+	/* Version 4 messages */
+	NVSP_MSG4_TYPE_SEND_VF_ASSOCIATION,
+	NVSP_MSG4_TYPE_SWITCH_DATA_PATH,
+	NVSP_MSG4_TYPE_UPLINK_CONNECT_STATE_DEPRECATED,
+
+	NVSP_MSG4_MAX = NVSP_MSG4_TYPE_UPLINK_CONNECT_STATE_DEPRECATED,
+
+	/* Version 5 messages */
+	NVSP_MSG5_TYPE_OID_QUERY_EX,
+	NVSP_MSG5_TYPE_OID_QUERY_EX_COMP,
+	NVSP_MSG5_TYPE_SUBCHANNEL,
+	NVSP_MSG5_TYPE_SEND_INDIRECTION_TABLE,
+
+	NVSP_MSG5_MAX = NVSP_MSG5_TYPE_SEND_INDIRECTION_TABLE,
 };
 
 enum {
@@ -447,10 +466,44 @@ union nvsp_2_message_uber {
 	struct nvsp_2_free_rxbuf free_rxbuf;
 } __packed;
 
+enum nvsp_subchannel_operation {
+	NVSP_SUBCHANNEL_NONE = 0,
+	NVSP_SUBCHANNEL_ALLOCATE,
+	NVSP_SUBCHANNEL_MAX
+};
+
+struct nvsp_5_subchannel_request {
+	u32 op;
+	u32 num_subchannels;
+} __packed;
+
+struct nvsp_5_subchannel_complete {
+	u32 status;
+	u32 num_subchannels; /* Actual number of subchannels allocated */
+} __packed;
+
+struct nvsp_5_send_indirect_table {
+	/* The number of entries in the send indirection table */
+	u32 count;
+
+	/* The offset of the send indireciton table from top of this struct.
+	 * The send indirection table tells which channel to put the send
+	 * traffic on. Each entry is a channel number.
+	 */
+	u32 offset;
+} __packed;
+
+union nvsp_5_message_uber {
+	struct nvsp_5_subchannel_request subchn_req;
+	struct nvsp_5_subchannel_complete subchn_comp;
+	struct nvsp_5_send_indirect_table send_table;
+} __packed;
+
 union nvsp_all_messages {
 	union nvsp_message_init_uber init_msg;
 	union nvsp_1_message_uber v1_msg;
 	union nvsp_2_message_uber v2_msg;
+	union nvsp_5_message_uber v5_msg;
 } __packed;
 
 /* ALL Messages */
diff --git a/drivers/net/hyperv/netvsc.c b/drivers/net/hyperv/netvsc.c
index 9a0e9c6f1414..1a0280dcba7e 100644
--- a/drivers/net/hyperv/netvsc.c
+++ b/drivers/net/hyperv/netvsc.c
@@ -290,7 +290,7 @@ static int negotiate_nvsp_ver(struct hv_device *device,
 	    NVSP_STAT_SUCCESS)
 		return -EINVAL;
 
-	if (nvsp_ver != NVSP_PROTOCOL_VERSION_2)
+	if (nvsp_ver == NVSP_PROTOCOL_VERSION_1)
 		return 0;
 
 	/* NVSPv2 only: Send NDIS config */
@@ -314,6 +314,9 @@ static int netvsc_connect_vsp(struct hv_device *device)
 	struct nvsp_message *init_packet;
 	int ndis_version;
 	struct net_device *ndev;
+	u32 ver_list[] = { NVSP_PROTOCOL_VERSION_1, NVSP_PROTOCOL_VERSION_2,
+		NVSP_PROTOCOL_VERSION_4, NVSP_PROTOCOL_VERSION_5 };
+	int i, num_ver = 4; /* number of different NVSP versions */
 
 	net_device = get_outbound_net_device(device);
 	if (!net_device)
@@ -323,13 +326,14 @@ static int netvsc_connect_vsp(struct hv_device *device)
 	init_packet = &net_device->channel_init_pkt;
 
 	/* Negotiate the latest NVSP protocol supported */
-	if (negotiate_nvsp_ver(device, net_device, init_packet,
-			       NVSP_PROTOCOL_VERSION_2) == 0) {
-		net_device->nvsp_version = NVSP_PROTOCOL_VERSION_2;
-	} else if (negotiate_nvsp_ver(device, net_device, init_packet,
-				    NVSP_PROTOCOL_VERSION_1) == 0) {
-		net_device->nvsp_version = NVSP_PROTOCOL_VERSION_1;
-	} else {
+	for (i = num_ver - 1; i >= 0; i--)
+		if (negotiate_nvsp_ver(device, net_device, init_packet,
+				       ver_list[i])  == 0) {
+			net_device->nvsp_version = ver_list[i];
+			break;
+		}
+
+	if (i < 0) {
 		ret = -EPROTO;
 		goto cleanup;
 	}
@@ -339,7 +343,10 @@ static int netvsc_connect_vsp(struct hv_device *device)
 	/* Send the ndis version */
 	memset(init_packet, 0, sizeof(struct nvsp_message));
 
-	ndis_version = 0x00050001;
+	if (net_device->nvsp_version <= NVSP_PROTOCOL_VERSION_4)
+		ndis_version = 0x00050001;
+	else
+		ndis_version = 0x0006001e;
 
 	init_packet->hdr.msg_type = NVSP_MSG1_TYPE_SEND_NDIS_VER;
 	init_packet->msg.v1_msg.
diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c
index bcd2df2f406a..9ef6be90a81c 100644
--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -327,7 +327,7 @@ static int netvsc_change_mtu(struct net_device *ndev, int mtu)
 	if (nvdev == NULL || nvdev->destroy)
 		return -ENODEV;
 
-	if (nvdev->nvsp_version == NVSP_PROTOCOL_VERSION_2)
+	if (nvdev->nvsp_version >= NVSP_PROTOCOL_VERSION_2)
 		limit = NETVSC_MTU;
 
 	if (mtu < 68 || mtu > limit)
-- 
cgit v1.2.2


From df942e7ba70cd0a7aa9e0432b8a6a328de2c5574 Mon Sep 17 00:00:00 2001
From: Sunil Dutt Undekari <usdutt@qti.qualcomm.com>
Date: Thu, 20 Feb 2014 16:22:09 +0530
Subject: cfg80211: Pass TDLS peer capability information in tdls_mgmt

While framing the TDLS Setup Confirmation frame, the driver needs to
know if the TDLS peer is VHT/HT/WMM capable and thus shall construct
the VHT/HT operation / WMM parameter elements accordingly. Supplicant
determines if the TDLS peer is VHT/HT/WMM capable based on the
presence of the respective IEs in the received TDLS Setup Response frame.

The host driver should not need to parse the received TDLS Response
frame and thus, should be able to rely on the supplicant to indicate
the capability of the peer through additional flags while transmitting
the TDLS Setup Confirmation frame through tdls_mgmt operations.

Signed-off-by: Sunil Dutt Undekari <usdutt@qti.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/mwifiex/cfg80211.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index 436ba437a4ba..6948a97af839 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -2600,8 +2600,8 @@ static int mwifiex_cfg80211_set_coalesce(struct wiphy *wiphy,
 static int
 mwifiex_cfg80211_tdls_mgmt(struct wiphy *wiphy, struct net_device *dev,
 			   u8 *peer, u8 action_code, u8 dialog_token,
-			   u16 status_code, const u8 *extra_ies,
-			   size_t extra_ies_len)
+			   u16 status_code, u32 peer_capability,
+			   const u8 *extra_ies, size_t extra_ies_len)
 {
 	struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
 	int ret;
-- 
cgit v1.2.2


From 37e3308cb2b6933019d9d9c2045877d6d68d9c5a Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Mon, 17 Feb 2014 10:48:17 +0100
Subject: mac80211: allow driver to return error from sched_scan_stop

In order to solve races with sched_scan_stop, it is necessary
for the driver to be able to return an error to propagate that
to cfg80211 so it doesn't send an event.

Reviewed-by: Alexander Bondar <alexander.bondar@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/mac80211.c | 6 ++++--
 drivers/net/wireless/ti/wlcore/main.c       | 6 ++++--
 2 files changed, 8 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index beaf8140abbf..7492fc0f2766 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -1746,14 +1746,16 @@ out:
 	return ret;
 }
 
-static void iwl_mvm_mac_sched_scan_stop(struct ieee80211_hw *hw,
-					struct ieee80211_vif *vif)
+static int iwl_mvm_mac_sched_scan_stop(struct ieee80211_hw *hw,
+				       struct ieee80211_vif *vif)
 {
 	struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw);
 
 	mutex_lock(&mvm->mutex);
 	iwl_mvm_sched_scan_stop(mvm);
 	mutex_unlock(&mvm->mutex);
+
+	return 0;
 }
 
 static int iwl_mvm_mac_set_key(struct ieee80211_hw *hw,
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 7aae5b3a0c2c..4175a57ac9f5 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -3668,8 +3668,8 @@ out:
 	return ret;
 }
 
-static void wl1271_op_sched_scan_stop(struct ieee80211_hw *hw,
-				      struct ieee80211_vif *vif)
+static int wl1271_op_sched_scan_stop(struct ieee80211_hw *hw,
+				     struct ieee80211_vif *vif)
 {
 	struct wl1271 *wl = hw->priv;
 	struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif);
@@ -3691,6 +3691,8 @@ static void wl1271_op_sched_scan_stop(struct ieee80211_hw *hw,
 	wl1271_ps_elp_sleep(wl);
 out:
 	mutex_unlock(&wl->mutex);
+
+	return 0;
 }
 
 static int wl1271_op_set_frag_threshold(struct ieee80211_hw *hw, u32 value)
-- 
cgit v1.2.2


From 1270c416e1ba726b4a1d15167babfe5f2c0b59e6 Mon Sep 17 00:00:00 2001
From: Eytan Lifshitz <eytan.lifshitz@intel.com>
Date: Tue, 18 Feb 2014 15:02:29 +0200
Subject: iwlwifi: mvm: fix possible memory leak

iwl_parse_nvm_data() doesn't free allocated memory if it is
fed with invalid parameter. Fix this.

Signed-off-by: Eytan Lifshitz <eytan.lifshitz@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-nvm-parse.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
index df3ea60c87d9..80c40967cd35 100644
--- a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
+++ b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
@@ -516,6 +516,7 @@ iwl_parse_nvm_data(struct device *dev, const struct iwl_cfg *cfg,
 		if (!nvm_calib) {
 			IWL_ERR_DEV(dev,
 				    "Can't parse empty Calib NVM sections\n");
+			kfree(data);
 			return NULL;
 		}
 		/* in family 8000 Xtal calibration values moved to OTP */
-- 
cgit v1.2.2


From cfadc3ffccd5b75b4cd6babbfcd2271d37a82e90 Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Wed, 12 Feb 2014 08:51:54 +0200
Subject: iwlwifi: pcie: stop the firmware when we restart it

In case the firmware didn't assert but we want to restart
it, e.g. we didn't get the reply for a host command, or the
Tx queues are stuck, we should stop the firmware by
provoking an interrupt. This allows to better debug the
firmware in these bad scenarios.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/pcie/tx.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c
index e476d9eda61a..3b0c72c10054 100644
--- a/drivers/net/wireless/iwlwifi/pcie/tx.c
+++ b/drivers/net/wireless/iwlwifi/pcie/tx.c
@@ -207,7 +207,7 @@ static void iwl_pcie_txq_stuck_timer(unsigned long data)
 		IWL_ERR(trans, "scratch %d = 0x%08x\n", i,
 			le32_to_cpu(txq->scratchbufs[i].scratch));
 
-	iwl_trans_fw_error(trans);
+	iwl_write_prph(trans, DEVICE_SET_NMI_REG, 1);
 }
 
 /*
@@ -1024,7 +1024,7 @@ static void iwl_pcie_cmdq_reclaim(struct iwl_trans *trans, int txq_id, int idx)
 		if (nfreed++ > 0) {
 			IWL_ERR(trans, "HCMD skipped: index (%d) %d %d\n",
 				idx, q->write_ptr, q->read_ptr);
-			iwl_trans_fw_error(trans);
+			iwl_write_prph(trans, DEVICE_SET_NMI_REG, 1);
 		}
 	}
 
@@ -1583,6 +1583,7 @@ static int iwl_pcie_send_hcmd_sync(struct iwl_trans *trans,
 			       get_cmd_string(trans_pcie, cmd->id));
 		ret = -ETIMEDOUT;
 
+		iwl_write_prph(trans, DEVICE_SET_NMI_REG, 1);
 		iwl_trans_fw_error(trans);
 
 		goto cancel;
-- 
cgit v1.2.2


From 1f6bf0786ebdd05660b82babcf059cf2b7c9053d Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Sun, 16 Feb 2014 15:36:00 +0200
Subject: iwlwifi: mvm: set immediate apply time bit in time events

Newer firmware support a new bit in the policy  that allows
to request to apply the time event immediately. Add this bit
without removing the workarounds we used until now to support
older firmares.

Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/fw-api.h     | 1 +
 drivers/net/wireless/iwlwifi/mvm/time-event.c | 6 ++++--
 2 files changed, 5 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/iwlwifi/mvm/fw-api.h
index 4d808a91ea7f..807fa525cafe 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api.h
@@ -712,6 +712,7 @@ enum {
 	TE_V2_NOTIF_HOST_FRAG_END = BIT(5),
 	TE_V2_NOTIF_INTERNAL_FRAG_START = BIT(6),
 	TE_V2_NOTIF_INTERNAL_FRAG_END = BIT(7),
+	T2_V2_START_IMMEDIATELY = BIT(11),
 
 	TE_V2_NOTIF_MSK = 0xff,
 
diff --git a/drivers/net/wireless/iwlwifi/mvm/time-event.c b/drivers/net/wireless/iwlwifi/mvm/time-event.c
index e145dd41e85e..61331245ad93 100644
--- a/drivers/net/wireless/iwlwifi/mvm/time-event.c
+++ b/drivers/net/wireless/iwlwifi/mvm/time-event.c
@@ -438,7 +438,8 @@ void iwl_mvm_protect_session(struct iwl_mvm *mvm,
 	time_cmd.duration = cpu_to_le32(duration);
 	time_cmd.repeat = 1;
 	time_cmd.policy = cpu_to_le16(TE_V2_NOTIF_HOST_EVENT_START |
-				      TE_V2_NOTIF_HOST_EVENT_END);
+				      TE_V2_NOTIF_HOST_EVENT_END |
+				      T2_V2_START_IMMEDIATELY);
 
 	iwl_mvm_time_event_send_add(mvm, vif, te_data, &time_cmd);
 }
@@ -553,7 +554,8 @@ int iwl_mvm_start_p2p_roc(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
 	time_cmd.duration = cpu_to_le32(MSEC_TO_TU(duration));
 	time_cmd.repeat = 1;
 	time_cmd.policy = cpu_to_le16(TE_V2_NOTIF_HOST_EVENT_START |
-				      TE_V2_NOTIF_HOST_EVENT_END);
+				      TE_V2_NOTIF_HOST_EVENT_END |
+				      T2_V2_START_IMMEDIATELY);
 
 	return iwl_mvm_time_event_send_add(mvm, vif, te_data, &time_cmd);
 }
-- 
cgit v1.2.2


From 5fc0f76c43bdb19f8080a25b653569666a637306 Mon Sep 17 00:00:00 2001
From: Eyal Shapira <eyal@wizery.com>
Date: Tue, 28 Jan 2014 01:35:32 +0200
Subject: iwlwifi: mvm: add Rx frames statistics via debugfs

Collect statistics regarding rates and aggregations in Rx
frames and export the data via debugfs.

Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/debugfs.c | 72 +++++++++++++++++++++++++++++
 drivers/net/wireless/iwlwifi/mvm/mvm.h     | 29 ++++++++++++
 drivers/net/wireless/iwlwifi/mvm/rs.c      | 73 +++++++++++++++++++++++++++++-
 drivers/net/wireless/iwlwifi/mvm/rx.c      | 13 ++++++
 4 files changed, 185 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/debugfs.c b/drivers/net/wireless/iwlwifi/mvm/debugfs.c
index 3278b4890823..e0ff43ed2482 100644
--- a/drivers/net/wireless/iwlwifi/mvm/debugfs.c
+++ b/drivers/net/wireless/iwlwifi/mvm/debugfs.c
@@ -531,6 +531,76 @@ static ssize_t iwl_dbgfs_fw_rx_stats_read(struct file *file,
 }
 #undef PRINT_STAT_LE32
 
+static ssize_t iwl_dbgfs_frame_stats_read(struct iwl_mvm *mvm,
+					  char __user *user_buf, size_t count,
+					  loff_t *ppos,
+					  struct iwl_mvm_frame_stats *stats)
+{
+	char *buff;
+	int pos = 0, idx, i;
+	int ret;
+	size_t bufsz = 1024;
+
+	buff = kmalloc(bufsz, GFP_KERNEL);
+	if (!buff)
+		return -ENOMEM;
+
+	spin_lock_bh(&mvm->drv_stats_lock);
+	pos += scnprintf(buff + pos, bufsz - pos,
+			 "Legacy/HT/VHT\t:\t%d/%d/%d\n",
+			 stats->legacy_frames,
+			 stats->ht_frames,
+			 stats->vht_frames);
+	pos += scnprintf(buff + pos, bufsz - pos, "20/40/80\t:\t%d/%d/%d\n",
+			 stats->bw_20_frames,
+			 stats->bw_40_frames,
+			 stats->bw_80_frames);
+	pos += scnprintf(buff + pos, bufsz - pos, "NGI/SGI\t\t:\t%d/%d\n",
+			 stats->ngi_frames,
+			 stats->sgi_frames);
+	pos += scnprintf(buff + pos, bufsz - pos, "SISO/MIMO2\t:\t%d/%d\n",
+			 stats->siso_frames,
+			 stats->mimo2_frames);
+	pos += scnprintf(buff + pos, bufsz - pos, "FAIL/SCSS\t:\t%d/%d\n",
+			 stats->fail_frames,
+			 stats->success_frames);
+	pos += scnprintf(buff + pos, bufsz - pos, "MPDUs agg\t:\t%d\n",
+			 stats->agg_frames);
+	pos += scnprintf(buff + pos, bufsz - pos, "A-MPDUs\t\t:\t%d\n",
+			 stats->ampdu_count);
+	pos += scnprintf(buff + pos, bufsz - pos, "Avg MPDUs/A-MPDU:\t%d\n",
+			 stats->ampdu_count > 0 ?
+			 (stats->agg_frames / stats->ampdu_count) : 0);
+
+	pos += scnprintf(buff + pos, bufsz - pos, "Last Rates\n");
+
+	idx = stats->last_frame_idx - 1;
+	for (i = 0; i < ARRAY_SIZE(stats->last_rates); i++) {
+		idx = (idx + 1) % ARRAY_SIZE(stats->last_rates);
+		if (stats->last_rates[idx] == 0)
+			continue;
+		pos += scnprintf(buff + pos, bufsz - pos, "Rate[%d]: ",
+				 (int)(ARRAY_SIZE(stats->last_rates) - i));
+		pos += rs_pretty_print_rate(buff + pos, stats->last_rates[idx]);
+	}
+	spin_unlock_bh(&mvm->drv_stats_lock);
+
+	ret = simple_read_from_buffer(user_buf, count, ppos, buff, pos);
+	kfree(buff);
+
+	return ret;
+}
+
+static ssize_t iwl_dbgfs_drv_rx_stats_read(struct file *file,
+					   char __user *user_buf, size_t count,
+					   loff_t *ppos)
+{
+	struct iwl_mvm *mvm = file->private_data;
+
+	return iwl_dbgfs_frame_stats_read(mvm, user_buf, count, ppos,
+					  &mvm->drv_rx_stats);
+}
+
 static ssize_t iwl_dbgfs_fw_restart_write(struct iwl_mvm *mvm, char *buf,
 					  size_t count, loff_t *ppos)
 {
@@ -959,6 +1029,7 @@ MVM_DEBUGFS_READ_FILE_OPS(bt_notif);
 MVM_DEBUGFS_READ_FILE_OPS(bt_cmd);
 MVM_DEBUGFS_READ_WRITE_FILE_OPS(disable_power_off, 64);
 MVM_DEBUGFS_READ_FILE_OPS(fw_rx_stats);
+MVM_DEBUGFS_READ_FILE_OPS(drv_rx_stats);
 MVM_DEBUGFS_WRITE_FILE_OPS(fw_restart, 10);
 MVM_DEBUGFS_WRITE_FILE_OPS(fw_nmi, 10);
 MVM_DEBUGFS_READ_WRITE_FILE_OPS(scan_ant_rxchain, 8);
@@ -990,6 +1061,7 @@ int iwl_mvm_dbgfs_register(struct iwl_mvm *mvm, struct dentry *dbgfs_dir)
 		MVM_DEBUGFS_ADD_FILE(disable_power_off, mvm->debugfs_dir,
 				     S_IRUSR | S_IWUSR);
 	MVM_DEBUGFS_ADD_FILE(fw_rx_stats, mvm->debugfs_dir, S_IRUSR);
+	MVM_DEBUGFS_ADD_FILE(drv_rx_stats, mvm->debugfs_dir, S_IRUSR);
 	MVM_DEBUGFS_ADD_FILE(fw_restart, mvm->debugfs_dir, S_IWUSR);
 	MVM_DEBUGFS_ADD_FILE(fw_nmi, mvm->debugfs_dir, S_IWUSR);
 	MVM_DEBUGFS_ADD_FILE(scan_ant_rxchain, mvm->debugfs_dir,
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index 823765ea89a9..5fb51099f99d 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -425,6 +425,28 @@ struct iwl_mvm_tt_mgmt {
 	bool throttle;
 };
 
+#define IWL_MVM_NUM_LAST_FRAMES_UCODE_RATES 8
+
+struct iwl_mvm_frame_stats {
+	u32 legacy_frames;
+	u32 ht_frames;
+	u32 vht_frames;
+	u32 bw_20_frames;
+	u32 bw_40_frames;
+	u32 bw_80_frames;
+	u32 bw_160_frames;
+	u32 sgi_frames;
+	u32 ngi_frames;
+	u32 siso_frames;
+	u32 mimo2_frames;
+	u32 agg_frames;
+	u32 ampdu_count;
+	u32 success_frames;
+	u32 fail_frames;
+	u32 last_rates[IWL_MVM_NUM_LAST_FRAMES_UCODE_RATES];
+	int last_frame_idx;
+};
+
 struct iwl_mvm {
 	/* for logger access */
 	struct device *dev;
@@ -526,6 +548,9 @@ struct iwl_mvm {
 	struct debugfs_blob_wrapper nvm_sw_blob;
 	struct debugfs_blob_wrapper nvm_calib_blob;
 	struct debugfs_blob_wrapper nvm_prod_blob;
+
+	struct iwl_mvm_frame_stats drv_rx_stats;
+	spinlock_t drv_stats_lock;
 #endif
 
 	struct iwl_mvm_phy_ctxt phy_ctxts[NUM_PHY_CTX];
@@ -810,6 +835,10 @@ iwl_mvm_vif_dbgfs_clean(struct iwl_mvm *mvm, struct ieee80211_vif *vif)
 
 /* rate scaling */
 int iwl_mvm_send_lq_cmd(struct iwl_mvm *mvm, struct iwl_lq_cmd *lq, bool init);
+void iwl_mvm_update_frame_stats(struct iwl_mvm *mvm,
+				struct iwl_mvm_frame_stats *stats,
+				u32 rate, bool agg);
+int rs_pretty_print_rate(char *buf, const u32 rate);
 
 /* power management */
 int iwl_power_legacy_set_cam_mode(struct iwl_mvm *mvm);
diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.c b/drivers/net/wireless/iwlwifi/mvm/rs.c
index 77c6e36c71cd..399709f2be2e 100644
--- a/drivers/net/wireless/iwlwifi/mvm/rs.c
+++ b/drivers/net/wireless/iwlwifi/mvm/rs.c
@@ -2240,6 +2240,73 @@ static void rs_vht_set_enabled_rates(struct ieee80211_sta *sta,
 	}
 }
 
+#ifdef CONFIG_IWLWIFI_DEBUGFS
+static void iwl_mvm_reset_frame_stats(struct iwl_mvm *mvm,
+				      struct iwl_mvm_frame_stats *stats)
+{
+	spin_lock_bh(&mvm->drv_stats_lock);
+	memset(stats, 0, sizeof(*stats));
+	spin_unlock_bh(&mvm->drv_stats_lock);
+}
+
+void iwl_mvm_update_frame_stats(struct iwl_mvm *mvm,
+				struct iwl_mvm_frame_stats *stats,
+				u32 rate, bool agg)
+{
+	u8 nss = 0, mcs = 0;
+
+	spin_lock(&mvm->drv_stats_lock);
+
+	if (agg)
+		stats->agg_frames++;
+
+	stats->success_frames++;
+
+	switch (rate & RATE_MCS_CHAN_WIDTH_MSK) {
+	case RATE_MCS_CHAN_WIDTH_20:
+		stats->bw_20_frames++;
+		break;
+	case RATE_MCS_CHAN_WIDTH_40:
+		stats->bw_40_frames++;
+		break;
+	case RATE_MCS_CHAN_WIDTH_80:
+		stats->bw_80_frames++;
+		break;
+	default:
+		WARN_ONCE(1, "bad BW. rate 0x%x", rate);
+	}
+
+	if (rate & RATE_MCS_HT_MSK) {
+		stats->ht_frames++;
+		mcs = rate & RATE_HT_MCS_RATE_CODE_MSK;
+		nss = ((rate & RATE_HT_MCS_NSS_MSK) >> RATE_HT_MCS_NSS_POS) + 1;
+	} else if (rate & RATE_MCS_VHT_MSK) {
+		stats->vht_frames++;
+		mcs = rate & RATE_VHT_MCS_RATE_CODE_MSK;
+		nss = ((rate & RATE_VHT_MCS_NSS_MSK) >>
+		       RATE_VHT_MCS_NSS_POS) + 1;
+	} else {
+		stats->legacy_frames++;
+	}
+
+	if (nss == 1)
+		stats->siso_frames++;
+	else if (nss == 2)
+		stats->mimo2_frames++;
+
+	if (rate & RATE_MCS_SGI_MSK)
+		stats->sgi_frames++;
+	else
+		stats->ngi_frames++;
+
+	stats->last_rates[stats->last_frame_idx] = rate;
+	stats->last_frame_idx = (stats->last_frame_idx + 1) %
+		ARRAY_SIZE(stats->last_rates);
+
+	spin_unlock(&mvm->drv_stats_lock);
+}
+#endif
+
 /*
  * Called after adding a new station to initialize rate scaling
  */
@@ -2334,7 +2401,9 @@ void iwl_mvm_rs_rate_init(struct iwl_mvm *mvm, struct ieee80211_sta *sta,
 #ifdef CONFIG_MAC80211_DEBUGFS
 	lq_sta->dbg_fixed_rate = 0;
 #endif
-
+#ifdef CONFIG_IWLWIFI_DEBUGFS
+	iwl_mvm_reset_frame_stats(mvm, &mvm->drv_rx_stats);
+#endif
 	rs_initialize_lq(mvm, sta, lq_sta, band, init);
 }
 
@@ -2546,7 +2615,7 @@ static void rs_free_sta(void *mvm_r, struct ieee80211_sta *sta,
 }
 
 #ifdef CONFIG_MAC80211_DEBUGFS
-static int rs_pretty_print_rate(char *buf, const u32 rate)
+int rs_pretty_print_rate(char *buf, const u32 rate)
 {
 
 	char *type, *bw;
diff --git a/drivers/net/wireless/iwlwifi/mvm/rx.c b/drivers/net/wireless/iwlwifi/mvm/rx.c
index 817d3e0b37e2..6061553a5e44 100644
--- a/drivers/net/wireless/iwlwifi/mvm/rx.c
+++ b/drivers/net/wireless/iwlwifi/mvm/rx.c
@@ -77,6 +77,15 @@ int iwl_mvm_rx_rx_phy_cmd(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb,
 
 	memcpy(&mvm->last_phy_info, pkt->data, sizeof(mvm->last_phy_info));
 	mvm->ampdu_ref++;
+
+#ifdef CONFIG_IWLWIFI_DEBUGFS
+	if (mvm->last_phy_info.phy_flags & cpu_to_le16(RX_RES_PHY_FLAGS_AGG)) {
+		spin_lock(&mvm->drv_stats_lock);
+		mvm->drv_rx_stats.ampdu_count++;
+		spin_unlock(&mvm->drv_stats_lock);
+	}
+#endif
+
 	return 0;
 }
 
@@ -391,6 +400,10 @@ int iwl_mvm_rx_rx_mpdu(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb,
 							    rx_status.band);
 	}
 
+#ifdef CONFIG_IWLWIFI_DEBUGFS
+	iwl_mvm_update_frame_stats(mvm, &mvm->drv_rx_stats, rate_n_flags,
+				   rx_status.flag & RX_FLAG_AMPDU_DETAILS);
+#endif
 	iwl_mvm_pass_packet_to_mac80211(mvm, hdr, len, ampdu_status,
 					rxb, &rx_status);
 	return 0;
-- 
cgit v1.2.2


From 010d3c3989706d800ae72253773fa6537cc9f74c Mon Sep 17 00:00:00 2001
From: Veaceslav Falico <vfalico@redhat.com>
Date: Thu, 20 Feb 2014 12:07:57 +0100
Subject: bonding: fix bond_arp_rcv() race of curr_active_slave

bond->curr_active_slave can be changed between its deferences, even to
NULL, and thus we might panic.

We're always holding the rcu (rx_handler->bond_handle_frame()->bond_arp_rcv())
so fix this by rcu_dereferencing() it and using the saved.

Reported-by: Ding Tianhong <dingtianhong@huawei.com>
Fixes: aeea64a ("bonding: don't trust arp requests unless active slave really works")
CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Acked-by: Ding Tianhong <dingtianhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_main.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 71edf03544aa..bd70bbc7992c 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -2254,6 +2254,7 @@ int bond_arp_rcv(const struct sk_buff *skb, struct bonding *bond,
 		 struct slave *slave)
 {
 	struct arphdr *arp = (struct arphdr *)skb->data;
+	struct slave *curr_active_slave;
 	unsigned char *arp_ptr;
 	__be32 sip, tip;
 	int alen, is_arp = skb->protocol == __cpu_to_be16(ETH_P_ARP);
@@ -2299,6 +2300,8 @@ int bond_arp_rcv(const struct sk_buff *skb, struct bonding *bond,
 		 bond->params.arp_validate, slave_do_arp_validate(bond, slave),
 		 &sip, &tip);
 
+	curr_active_slave = rcu_dereference(bond->curr_active_slave);
+
 	/*
 	 * Backup slaves won't see the ARP reply, but do come through
 	 * here for each ARP probe (so we swap the sip/tip to validate
@@ -2312,11 +2315,12 @@ int bond_arp_rcv(const struct sk_buff *skb, struct bonding *bond,
 	 * is done to avoid endless looping when we can't reach the
 	 * arp_ip_target and fool ourselves with our own arp requests.
 	 */
+
 	if (bond_is_active_slave(slave))
 		bond_validate_arp(bond, slave, sip, tip);
-	else if (bond->curr_active_slave &&
-		 time_after(slave_last_rx(bond, bond->curr_active_slave),
-			    bond->curr_active_slave->last_link_up))
+	else if (curr_active_slave &&
+		 time_after(slave_last_rx(bond, curr_active_slave),
+			    curr_active_slave->last_link_up))
 		bond_validate_arp(bond, slave, tip, sip);
 
 out_unlock:
-- 
cgit v1.2.2


From 625777e3861f0e664174dc95696328c7c5b0e4b3 Mon Sep 17 00:00:00 2001
From: Mitch Williams <mitch.a.williams@intel.com>
Date: Thu, 20 Feb 2014 19:29:05 -0800
Subject: i40evf: request reset on tx hang

If the kernel watchdog bites us, ask the PF to reset us and attempt to
reinit the driver.

Change-ID: Ic97665aeeed71ce712b9c4f057e78ff8372522b9
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/i40evf/i40evf.h          |  1 +
 drivers/net/ethernet/intel/i40evf/i40evf_main.c     | 10 +++++++---
 drivers/net/ethernet/intel/i40evf/i40evf_virtchnl.c | 12 ++++++++++++
 3 files changed, 20 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40evf/i40evf.h b/drivers/net/ethernet/intel/i40evf/i40evf.h
index ef7ce65bc00a..c9a5056015be 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf.h
+++ b/drivers/net/ethernet/intel/i40evf/i40evf.h
@@ -287,6 +287,7 @@ void i40evf_add_vlans(struct i40evf_adapter *adapter);
 void i40evf_del_vlans(struct i40evf_adapter *adapter);
 void i40evf_set_promiscuous(struct i40evf_adapter *adapter, int flags);
 void i40evf_request_stats(struct i40evf_adapter *adapter);
+void i40evf_request_reset(struct i40evf_adapter *adapter);
 void i40evf_virtchnl_completion(struct i40evf_adapter *adapter,
 				enum i40e_virtchnl_ops v_opcode,
 				i40e_status v_retval, u8 *msg, u16 msglen);
diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index fe2271e19423..1629b73d281a 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -167,9 +167,13 @@ static void i40evf_tx_timeout(struct net_device *netdev)
 	struct i40evf_adapter *adapter = netdev_priv(netdev);
 
 	adapter->tx_timeout_count++;
-
-	/* Do the reset outside of interrupt context */
-	schedule_work(&adapter->reset_task);
+	dev_info(&adapter->pdev->dev, "TX timeout detected.\n");
+	if (!(adapter->flags & I40EVF_FLAG_RESET_PENDING)) {
+		dev_info(&adapter->pdev->dev, "Requesting reset from PF\n");
+		i40evf_request_reset(adapter);
+		adapter->flags |= I40EVF_FLAG_RESET_PENDING;
+		schedule_work(&adapter->reset_task);
+	}
 }
 
 /**
diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_virtchnl.c b/drivers/net/ethernet/intel/i40evf/i40evf_virtchnl.c
index 93891a114d3f..e294f012647d 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_virtchnl.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_virtchnl.c
@@ -654,6 +654,18 @@ void i40evf_request_stats(struct i40evf_adapter *adapter)
 		/* if the request failed, don't lock out others */
 		adapter->current_op = I40E_VIRTCHNL_OP_UNKNOWN;
 }
+/**
+ * i40evf_request_reset
+ * @adapter: adapter structure
+ *
+ * Request that the PF reset this VF. No response is expected.
+ **/
+void i40evf_request_reset(struct i40evf_adapter *adapter)
+{
+	/* Don't check CURRENT_OP - this is always higher priority */
+	i40evf_send_pf_msg(adapter, I40E_VIRTCHNL_OP_RESET_VF, NULL, 0);
+	adapter->current_op = I40E_VIRTCHNL_OP_UNKNOWN;
+}
 
 /**
  * i40evf_virtchnl_completion
-- 
cgit v1.2.2


From ed1f5b58ea01757c5878ecff762e884767da9bab Mon Sep 17 00:00:00 2001
From: Mitch Williams <mitch.a.williams@intel.com>
Date: Thu, 20 Feb 2014 19:29:06 -0800
Subject: i40evf: remove VLAN filters on close

We remove all the MAC filters, so remove the VLAN filters, too.

Change-ID: I4f7559acdf005dc3f359bf6460ce32d183c8878b
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/i40evf/i40evf_main.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index 1629b73d281a..75a2c6f19121 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -972,9 +972,14 @@ void i40evf_down(struct i40evf_adapter *adapter)
 	list_for_each_entry(f, &adapter->mac_filter_list, list) {
 		f->remove = true;
 	}
+	/* remove all VLAN filters */
+	list_for_each_entry(f, &adapter->vlan_filter_list, list) {
+		f->remove = true;
+	}
 	if (!(adapter->flags & I40EVF_FLAG_PF_COMMS_FAILED) &&
 	    adapter->state != __I40EVF_RESETTING) {
 		adapter->aq_required |= I40EVF_FLAG_AQ_DEL_MAC_FILTER;
+		adapter->aq_required |= I40EVF_FLAG_AQ_DEL_VLAN_FILTER;
 		/* disable receives */
 		adapter->aq_required |= I40EVF_FLAG_AQ_DISABLE_QUEUES;
 		mod_timer_pending(&adapter->watchdog_timer, jiffies + 1);
-- 
cgit v1.2.2


From dbb01c8aa0dc8c514cdfd0b11dc401418a4f047a Mon Sep 17 00:00:00 2001
From: Mitch Williams <mitch.a.williams@intel.com>
Date: Thu, 20 Feb 2014 19:29:07 -0800
Subject: i40evf: fix multiple crashes on remove

Depending upon the state of the driver, there are several potential
pitfalls on remove. Kill the watchdog task so rmmod doesn't hang.
Check the adapter->msix_entries field, not the num_msix_vectors field,
which is never cleared.

Change-ID: I0546048477f09fc19e481bd37efa30daae4faa88
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/i40evf/i40evf_main.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index 75a2c6f19121..e0eb27dc36de 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -215,6 +215,9 @@ static void i40evf_irq_disable(struct i40evf_adapter *adapter)
 	int i;
 	struct i40e_hw *hw = &adapter->hw;
 
+	if (!adapter->msix_entries)
+		return;
+
 	for (i = 1; i < adapter->num_msix_vectors; i++) {
 		wr32(hw, I40E_VFINT_DYN_CTLN1(i - 1), 0);
 		synchronize_irq(adapter->msix_entries[i].vector);
@@ -2372,17 +2375,15 @@ static void i40evf_remove(struct pci_dev *pdev)
 	}
 	adapter->state = __I40EVF_REMOVE;
 
-	if (adapter->num_msix_vectors) {
+	if (adapter->msix_entries) {
 		i40evf_misc_irq_disable(adapter);
-		del_timer_sync(&adapter->watchdog_timer);
-
-		flush_scheduled_work();
-
 		i40evf_free_misc_irq(adapter);
-
 		i40evf_reset_interrupt_capability(adapter);
 	}
 
+	del_timer_sync(&adapter->watchdog_timer);
+	flush_scheduled_work();
+
 	if (hw->aq.asq.count)
 		i40evf_shutdown_adminq(hw);
 
-- 
cgit v1.2.2


From dbbd81119b7ac7bb383413c9e955f21abd15bf2b Mon Sep 17 00:00:00 2001
From: Mitch Williams <mitch.a.williams@intel.com>
Date: Thu, 20 Feb 2014 19:29:08 -0800
Subject: i40evf: get rid of pci_using_dac

PCI DAC doesn't really mean much on a virtualized PCI Express part, so
get rid of that check and just always set the HIGHDMA flag in the net
device.

Change-ID: I2040272be0e7934323f470c2bc73fbdd4f93e2b6
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/i40evf/i40evf_main.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index e0eb27dc36de..e9da5d5e5b46 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -2034,8 +2034,8 @@ static void i40evf_init_task(struct work_struct *work)
 	netdev->netdev_ops = &i40evf_netdev_ops;
 	i40evf_set_ethtool_ops(netdev);
 	netdev->watchdog_timeo = 5 * HZ;
-
-	netdev->features |= NETIF_F_SG |
+	netdev->features |= NETIF_F_HIGHDMA |
+			    NETIF_F_SG |
 			    NETIF_F_IP_CSUM |
 			    NETIF_F_SCTP_CSUM |
 			    NETIF_F_IPV6_CSUM |
@@ -2180,20 +2180,18 @@ static int i40evf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	struct net_device *netdev;
 	struct i40evf_adapter *adapter = NULL;
 	struct i40e_hw *hw = NULL;
-	int err, pci_using_dac;
+	int err;
 
 	err = pci_enable_device(pdev);
 	if (err)
 		return err;
 
 	if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) {
-		pci_using_dac = true;
 		/* coherent mask for the same size will always succeed if
 		 * dma_set_mask does
 		 */
 		dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
 	} else if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(32))) {
-		pci_using_dac = false;
 		dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
 	} else {
 		dev_err(&pdev->dev, "%s: DMA configuration failed: %d\n",
@@ -2224,8 +2222,6 @@ static int i40evf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	pci_set_drvdata(pdev, netdev);
 	adapter = netdev_priv(netdev);
-	if (pci_using_dac)
-		netdev->features |= NETIF_F_HIGHDMA;
 
 	adapter->netdev = netdev;
 	adapter->pdev = pdev;
-- 
cgit v1.2.2


From c2a137cb634f5819cdebad315cd6eea598d8255d Mon Sep 17 00:00:00 2001
From: Mitch Williams <mitch.a.williams@intel.com>
Date: Thu, 20 Feb 2014 19:29:09 -0800
Subject: i40evf: fix up strings in init task

Make sure errors are reported at the correct log level, quit printing
the function name every time, and make the messages more consistent in
format.

v2: Removed unnecessary periods and redundant OOM message.

Change-ID: I50e443467519ad3850def131d84626c50612c611
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/i40evf/i40evf_main.c | 36 +++++++++++--------------
 1 file changed, 16 insertions(+), 20 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index e9da5d5e5b46..db37ac4f388e 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -1939,14 +1939,14 @@ static void i40evf_init_task(struct work_struct *work)
 		adapter->flags &= ~I40EVF_FLAG_RESET_PENDING;
 		err = i40e_set_mac_type(hw);
 		if (err) {
-			dev_info(&pdev->dev, "%s: set_mac_type failed: %d\n",
-				__func__, err);
+			dev_err(&pdev->dev, "Failed to set MAC type (%d)\n",
+				err);
 		goto err;
 		}
 		err = i40evf_check_reset_complete(hw);
 		if (err) {
-			dev_info(&pdev->dev, "%s: device is still in reset (%d).\n",
-				__func__, err);
+			dev_err(&pdev->dev, "Device is still in reset (%d)\n",
+				err);
 			goto err;
 		}
 		hw->aq.num_arq_entries = I40EVF_AQ_LEN;
@@ -1956,14 +1956,14 @@ static void i40evf_init_task(struct work_struct *work)
 
 		err = i40evf_init_adminq(hw);
 		if (err) {
-			dev_info(&pdev->dev, "%s: init_adminq failed: %d\n",
-				__func__, err);
+			dev_err(&pdev->dev, "Failed to init Admin Queue (%d)\n",
+				err);
 			goto err;
 		}
 		err = i40evf_send_api_ver(adapter);
 		if (err) {
-			dev_info(&pdev->dev, "%s: unable to send to PF (%d)\n",
-				__func__, err);
+			dev_err(&pdev->dev, "Unable to send to PF (%d)\n",
+				err);
 			i40evf_shutdown_adminq(hw);
 			goto err;
 		}
@@ -1977,13 +1977,13 @@ static void i40evf_init_task(struct work_struct *work)
 		/* aq msg sent, awaiting reply */
 		err = i40evf_verify_api_ver(adapter);
 		if (err) {
-			dev_err(&pdev->dev, "Unable to verify API version, error %d\n",
+			dev_err(&pdev->dev, "Unable to verify API version (%d)\n",
 				err);
 			goto err;
 		}
 		err = i40evf_send_vf_config_msg(adapter);
 		if (err) {
-			dev_err(&pdev->dev, "Unable send config request, error %d\n",
+			dev_err(&pdev->dev, "Unable send config request (%d)\n",
 				err);
 			goto err;
 		}
@@ -1997,18 +1997,15 @@ static void i40evf_init_task(struct work_struct *work)
 				(I40E_MAX_VF_VSI *
 				 sizeof(struct i40e_virtchnl_vsi_resource));
 			adapter->vf_res = kzalloc(bufsz, GFP_KERNEL);
-			if (!adapter->vf_res) {
-				dev_err(&pdev->dev, "%s: unable to allocate memory\n",
-					__func__);
+			if (!adapter->vf_res)
 				goto err;
-			}
 		}
 		err = i40evf_get_vf_config(adapter);
 		if (err == I40E_ERR_ADMIN_QUEUE_NO_WORK)
 			goto restart;
 		if (err) {
-			dev_info(&pdev->dev, "%s: unable to get VF config (%d)\n",
-				__func__, err);
+			dev_err(&pdev->dev, "Unable to get VF config (%d)\n",
+				err);
 			goto err_alloc;
 		}
 		adapter->state = __I40EVF_INIT_SW;
@@ -2022,7 +2019,7 @@ static void i40evf_init_task(struct work_struct *work)
 			adapter->vsi_res = &adapter->vf_res->vsi_res[i];
 	}
 	if (!adapter->vsi_res) {
-		dev_info(&pdev->dev, "%s: no LAN VSI found\n", __func__);
+		dev_err(&pdev->dev, "No LAN VSI found\n");
 		goto err_alloc;
 	}
 
@@ -2053,9 +2050,8 @@ static void i40evf_init_task(struct work_struct *work)
 
 	/* The HW MAC address was set and/or determined in sw_init */
 	if (!is_valid_ether_addr(adapter->hw.mac.addr)) {
-		dev_info(&pdev->dev,
-			"Invalid MAC address %pMAC, using random\n",
-			adapter->hw.mac.addr);
+		dev_info(&pdev->dev, "Invalid MAC address %pMAC, using random\n",
+			 adapter->hw.mac.addr);
 		random_ether_addr(adapter->hw.mac.addr);
 	}
 	memcpy(netdev->dev_addr, adapter->hw.mac.addr, netdev->addr_len);
-- 
cgit v1.2.2


From db8ed10ff90c9a3c298f6c1ec635a1ac2503653c Mon Sep 17 00:00:00 2001
From: Mitch Williams <mitch.a.williams@intel.com>
Date: Thu, 20 Feb 2014 19:29:10 -0800
Subject: i40evf: remove bogus comment

This comment is simply not true.

Change-ID: If006b02b60984601a24257a951ae873dff568008
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/i40evf/i40evf_main.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index db37ac4f388e..1bb9debf9694 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -2048,7 +2048,6 @@ static void i40evf_init_task(struct work_struct *work)
 				    NETIF_F_HW_VLAN_CTAG_FILTER;
 	}
 
-	/* The HW MAC address was set and/or determined in sw_init */
 	if (!is_valid_ether_addr(adapter->hw.mac.addr)) {
 		dev_info(&pdev->dev, "Invalid MAC address %pMAC, using random\n",
 			 adapter->hw.mac.addr);
-- 
cgit v1.2.2


From d15632d48629714439ecda3ea07322129e619e41 Mon Sep 17 00:00:00 2001
From: Mitch Williams <mitch.a.williams@intel.com>
Date: Thu, 20 Feb 2014 19:29:11 -0800
Subject: i40evf: don't guess device name

We don't need to set an interface name here; the net core will do
that, and then it will get renamed by udev anyway.

Change-ID: I839a17837d19bedd1f490bff32ac5b85b4bfd97f
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/i40evf/i40evf_main.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index 1bb9debf9694..40a5e78560c7 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -2084,8 +2084,6 @@ static void i40evf_init_task(struct work_struct *work)
 
 	netif_carrier_off(netdev);
 
-	strcpy(netdev->name, "eth%d");
-
 	adapter->vsi.id = adapter->vsi_res->vsi_id;
 	adapter->vsi.seid = adapter->vsi_res->vsi_id; /* dummy */
 	adapter->vsi.back = adapter;
-- 
cgit v1.2.2


From 77d77f9f38a7451f5d1d97b0117eb783e0677fec Mon Sep 17 00:00:00 2001
From: Mitch Williams <mitch.a.williams@intel.com>
Date: Thu, 20 Feb 2014 19:29:12 -0800
Subject: i40evf: store ring size in ring structs

Keep the descriptor ring size in the actual ring structs instead of in
the adapter struct. This enables us to use common tx and rx code with
the i40e PF driver.

Also update copyrights.

Change-ID: I2861e599b2b4c76441c062ea14400f4750f54d0e
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/i40evf/i40evf.h         |  2 --
 drivers/net/ethernet/intel/i40evf/i40evf_ethtool.c | 13 ++++++++-----
 drivers/net/ethernet/intel/i40evf/i40evf_main.c    |  3 ---
 3 files changed, 8 insertions(+), 10 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40evf/i40evf.h b/drivers/net/ethernet/intel/i40evf/i40evf.h
index c9a5056015be..ccb43d343543 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf.h
+++ b/drivers/net/ethernet/intel/i40evf/i40evf.h
@@ -196,8 +196,6 @@ struct i40evf_adapter {
 
 	/* RX */
 	struct i40e_ring *rx_rings[I40E_MAX_VSI_QP];
-	int txd_count;
-	int rxd_count;
 	u64 hw_csum_rx_error;
 	int num_msix_vectors;
 	struct msix_entry *msix_entries;
diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_ethtool.c b/drivers/net/ethernet/intel/i40evf/i40evf_ethtool.c
index b0b1f4bf5ac0..8b0db1ce179c 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_ethtool.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_ethtool.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
  *
  * Intel Ethernet Controller XL710 Family Linux Virtual Function Driver
- * Copyright(c) 2013 Intel Corporation.
+ * Copyright(c) 2013 - 2014 Intel Corporation.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -241,6 +241,7 @@ static int i40evf_set_ringparam(struct net_device *netdev,
 {
 	struct i40evf_adapter *adapter = netdev_priv(netdev);
 	u32 new_rx_count, new_tx_count;
+	int i;
 
 	if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
 		return -EINVAL;
@@ -256,12 +257,14 @@ static int i40evf_set_ringparam(struct net_device *netdev,
 	new_rx_count = ALIGN(new_rx_count, I40EVF_REQ_DESCRIPTOR_MULTIPLE);
 
 	/* if nothing to do return success */
-	if ((new_tx_count == adapter->txd_count) &&
-	    (new_rx_count == adapter->rxd_count))
+	if ((new_tx_count == adapter->tx_rings[0]->count) &&
+	    (new_rx_count == adapter->rx_rings[0]->count))
 		return 0;
 
-	adapter->txd_count = new_tx_count;
-	adapter->rxd_count = new_rx_count;
+	for (i = 0; i < adapter->vsi_res->num_queue_pairs; i++) {
+		adapter->tx_rings[0]->count = new_tx_count;
+		adapter->rx_rings[0]->count = new_rx_count;
+	}
 
 	if (netif_running(netdev))
 		i40evf_reinit_locked(adapter);
diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index 40a5e78560c7..d05d5c1bb922 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -2025,9 +2025,6 @@ static void i40evf_init_task(struct work_struct *work)
 
 	adapter->flags |= I40EVF_FLAG_RX_CSUM_ENABLED;
 
-	adapter->txd_count = I40EVF_DEFAULT_TXD;
-	adapter->rxd_count = I40EVF_DEFAULT_RXD;
-
 	netdev->netdev_ops = &i40evf_netdev_ops;
 	i40evf_set_ethtool_ops(netdev);
 	netdev->watchdog_timeo = 5 * HZ;
-- 
cgit v1.2.2


From 673f2ebf374856bed894877e2bf18726298a2932 Mon Sep 17 00:00:00 2001
From: Mitch Williams <mitch.a.williams@intel.com>
Date: Thu, 20 Feb 2014 19:29:13 -0800
Subject: i40evf: update version and copyright date

A bunch of changes merit a new version number, and since these were
made in the new year, update the copyright date.

Change-ID: Ic3f282bf0c20679b9fb06860211afa7c78055bc2
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/i40evf/i40evf_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index d05d5c1bb922..c4185f09431f 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -31,10 +31,10 @@ char i40evf_driver_name[] = "i40evf";
 static const char i40evf_driver_string[] =
 	"Intel(R) XL710 X710 Virtual Function Network Driver";
 
-#define DRV_VERSION "0.9.11"
+#define DRV_VERSION "0.9.12"
 const char i40evf_driver_version[] = DRV_VERSION;
 static const char i40evf_copyright[] =
-	"Copyright (c) 2013 Intel Corporation.";
+	"Copyright (c) 2013 - 2014 Intel Corporation.";
 
 /* i40evf_pci_tbl - PCI Device ID Table
  *
-- 
cgit v1.2.2


From 821bd3e65dc346cfbdc8205e84d4b4a7f6ee86a9 Mon Sep 17 00:00:00 2001
From: Mitch A Williams <mitch.a.williams@intel.com>
Date: Thu, 20 Feb 2014 19:29:14 -0800
Subject: i40evf: remove errant space

Remove a bogus space.

Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h b/drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h
index f7cea1bca38d..97662b6bd98a 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h
+++ b/drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h
@@ -1229,7 +1229,7 @@ struct i40e_aqc_add_remove_cloud_filters_element_data {
 #define I40E_AQC_ADD_CLOUD_TNL_TYPE_NGE                 2
 #define I40E_AQC_ADD_CLOUD_TNL_TYPE_IP                  3
 
-	__le32 tenant_id ;
+	__le32 tenant_id;
 	u8     reserved[4];
 	__le16 queue_number;
 #define I40E_AQC_ADD_CLOUD_QUEUE_SHIFT                  0
-- 
cgit v1.2.2


From 81b8c0117d88adb9c72b3fa5feff0d1efac816bd Mon Sep 17 00:00:00 2001
From: Mitch Williams <mitch.a.williams@intel.com>
Date: Thu, 20 Feb 2014 19:29:15 -0800
Subject: i40e: remove unnecessary delay

Ain't nothing gonna break my stride, nobody's gonna slow me down,
oh no. I got to keep on moving.

This was originally put in for debugging just-in-case purposes
and never removed.

Change-ID: Ic12c2e179c3923f54e6ba0a9e4ab05d25c3bab29
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index 7d133faad4cf..189e250198dd 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -671,7 +671,6 @@ void i40e_reset_vf(struct i40e_vf *vf, bool flr)
 complete_reset:
 	/* reallocate vf resources to reset the VSI state */
 	i40e_free_vf_res(vf);
-	mdelay(10);
 	i40e_alloc_vf_res(vf);
 	i40e_enable_vf_mappings(vf);
 	set_bit(I40E_VF_STAT_ACTIVE, &vf->vf_states);
-- 
cgit v1.2.2


From 6c5ef6209d28bd2e75484e5cad070c898a7f5154 Mon Sep 17 00:00:00 2001
From: Mitch Williams <mitch.a.williams@intel.com>
Date: Thu, 20 Feb 2014 19:29:16 -0800
Subject: i40e: tighten up ring enable/disable flow

Change the do/while to a for loop, so we don't hit the delay each
time, even when the register is ready for action.
Don't bother to set or clear the QENA_STAT bit as it is
read-only.

Change-ID: Ie464718804dd79f6d726f291caa9b0c872b49978
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 32 ++++++++++++++---------------
 1 file changed, 15 insertions(+), 17 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 3116861198f0..5259a602add0 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -3108,13 +3108,13 @@ static int i40e_vsi_control_tx(struct i40e_vsi *vsi, bool enable)
 
 	pf_q = vsi->base_queue;
 	for (i = 0; i < vsi->num_queue_pairs; i++, pf_q++) {
-		j = 1000;
-		do {
-			usleep_range(1000, 2000);
+		for (j = 0; j < 50; j++) {
 			tx_reg = rd32(hw, I40E_QTX_ENA(pf_q));
-		} while (j-- && ((tx_reg >> I40E_QTX_ENA_QENA_REQ_SHIFT)
-			       ^ (tx_reg >> I40E_QTX_ENA_QENA_STAT_SHIFT)) & 1);
-
+			if (((tx_reg >> I40E_QTX_ENA_QENA_REQ_SHIFT) & 1) ==
+			    ((tx_reg >> I40E_QTX_ENA_QENA_STAT_SHIFT) & 1))
+				break;
+			usleep_range(1000, 2000);
+		}
 		/* Skip if the queue is already in the requested state */
 		if (enable && (tx_reg & I40E_QTX_ENA_QENA_STAT_MASK))
 			continue;
@@ -3124,8 +3124,7 @@ static int i40e_vsi_control_tx(struct i40e_vsi *vsi, bool enable)
 		/* turn on/off the queue */
 		if (enable) {
 			wr32(hw, I40E_QTX_HEAD(pf_q), 0);
-			tx_reg |= I40E_QTX_ENA_QENA_REQ_MASK |
-				  I40E_QTX_ENA_QENA_STAT_MASK;
+			tx_reg |= I40E_QTX_ENA_QENA_REQ_MASK;
 		} else {
 			tx_reg &= ~I40E_QTX_ENA_QENA_REQ_MASK;
 		}
@@ -3172,12 +3171,13 @@ static int i40e_vsi_control_rx(struct i40e_vsi *vsi, bool enable)
 
 	pf_q = vsi->base_queue;
 	for (i = 0; i < vsi->num_queue_pairs; i++, pf_q++) {
-		j = 1000;
-		do {
-			usleep_range(1000, 2000);
+		for (j = 0; j < 50; j++) {
 			rx_reg = rd32(hw, I40E_QRX_ENA(pf_q));
-		} while (j-- && ((rx_reg >> I40E_QRX_ENA_QENA_REQ_SHIFT)
-			       ^ (rx_reg >> I40E_QRX_ENA_QENA_STAT_SHIFT)) & 1);
+			if (((rx_reg >> I40E_QRX_ENA_QENA_REQ_SHIFT) & 1) ==
+			    ((rx_reg >> I40E_QRX_ENA_QENA_STAT_SHIFT) & 1))
+				break;
+			usleep_range(1000, 2000);
+		}
 
 		if (enable) {
 			/* is STAT set ? */
@@ -3191,11 +3191,9 @@ static int i40e_vsi_control_rx(struct i40e_vsi *vsi, bool enable)
 
 		/* turn on/off the queue */
 		if (enable)
-			rx_reg |= I40E_QRX_ENA_QENA_REQ_MASK |
-				  I40E_QRX_ENA_QENA_STAT_MASK;
+			rx_reg |= I40E_QRX_ENA_QENA_REQ_MASK;
 		else
-			rx_reg &= ~(I40E_QRX_ENA_QENA_REQ_MASK |
-				  I40E_QRX_ENA_QENA_STAT_MASK);
+			rx_reg &= ~I40E_QRX_ENA_QENA_REQ_MASK;
 		wr32(hw, I40E_QRX_ENA(pf_q), rx_reg);
 
 		/* wait for the change to finish */
-- 
cgit v1.2.2


From 77fa28befce5319f19e486ef97c3c682201c0735 Mon Sep 17 00:00:00 2001
From: Catherine Sullivan <catherine.sullivan@intel.com>
Date: Thu, 20 Feb 2014 19:29:17 -0800
Subject: i40e: Change MSIX to MSI-X

Fix inconsistent use of MSIX and MSI-X in messages.

Change-ID: Iae9ffb42819677c34544719044ed77632e06147d
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c     | 9 +++++----
 drivers/net/ethernet/intel/i40evf/i40evf_main.c | 3 ++-
 2 files changed, 7 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 5259a602add0..0d340d2f4d5e 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -5925,7 +5925,7 @@ static int i40e_init_msix(struct i40e_pf *pf)
 
 	} else if (vec == I40E_MIN_MSIX) {
 		/* Adjust for minimal MSIX use */
-		dev_info(&pf->pdev->dev, "Features disabled, not enough MSIX vectors\n");
+		dev_info(&pf->pdev->dev, "Features disabled, not enough MSI-X vectors\n");
 		pf->flags &= ~I40E_FLAG_VMDQ_ENABLED;
 		pf->num_vmdq_vsis = 0;
 		pf->num_vmdq_qps = 0;
@@ -6054,7 +6054,7 @@ static void i40e_init_interrupt_scheme(struct i40e_pf *pf)
 
 	if (!(pf->flags & I40E_FLAG_MSIX_ENABLED) &&
 	    (pf->flags & I40E_FLAG_MSI_ENABLED)) {
-		dev_info(&pf->pdev->dev, "MSIX not available, trying MSI\n");
+		dev_info(&pf->pdev->dev, "MSI-X not available, trying MSI\n");
 		err = pci_enable_msi(pf->pdev);
 		if (err) {
 			dev_info(&pf->pdev->dev, "MSI init failed - %d\n", err);
@@ -6063,7 +6063,7 @@ static void i40e_init_interrupt_scheme(struct i40e_pf *pf)
 	}
 
 	if (!(pf->flags & (I40E_FLAG_MSIX_ENABLED | I40E_FLAG_MSI_ENABLED)))
-		dev_info(&pf->pdev->dev, "MSIX and MSI not available, falling back to Legacy IRQ\n");
+		dev_info(&pf->pdev->dev, "MSI-X and MSI not available, falling back to Legacy IRQ\n");
 
 	/* track first vector for misc interrupts */
 	err = i40e_get_lump(pf, pf->irq_pile, 1, I40E_PILE_VALID_BIT-1);
@@ -6090,7 +6090,8 @@ static int i40e_setup_misc_vector(struct i40e_pf *pf)
 				  i40e_intr, 0, pf->misc_int_name, pf);
 		if (err) {
 			dev_info(&pf->pdev->dev,
-				 "request_irq for msix_misc failed: %d\n", err);
+				 "request_irq for %s failed: %d\n",
+				 pf->misc_int_name, err);
 			return -EFAULT;
 		}
 	}
diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index c4185f09431f..1e0171c9db42 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -524,7 +524,8 @@ static int i40evf_request_misc_irq(struct i40evf_adapter *adapter)
 			  adapter->misc_vector_name, netdev);
 	if (err) {
 		dev_err(&adapter->pdev->dev,
-			"request_irq for msix_aq failed: %d\n", err);
+			"request_irq for %s failed: %d\n",
+			adapter->misc_vector_name, err);
 		free_irq(adapter->msix_entries[0].vector, netdev);
 	}
 	return err;
-- 
cgit v1.2.2


From acbc3eb5f84c93a1d38b1a3ee7c8de7aab4e3709 Mon Sep 17 00:00:00 2001
From: Catherine Sullivan <catherine.sullivan@intel.com>
Date: Thu, 20 Feb 2014 19:29:18 -0800
Subject: i40e and i40evf: Bump driver versions

Update the driver versions.

Change-ID: I3fe23024d17da0e614ce126edb365bb2c428d482
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c     | 2 +-
 drivers/net/ethernet/intel/i40evf/i40evf_main.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 0d340d2f4d5e..53f3ed2df796 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -38,7 +38,7 @@ static const char i40e_driver_string[] =
 
 #define DRV_VERSION_MAJOR 0
 #define DRV_VERSION_MINOR 3
-#define DRV_VERSION_BUILD 31
+#define DRV_VERSION_BUILD 32
 #define DRV_VERSION __stringify(DRV_VERSION_MAJOR) "." \
 	     __stringify(DRV_VERSION_MINOR) "." \
 	     __stringify(DRV_VERSION_BUILD)    DRV_KERN
diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index 1e0171c9db42..b2c03bca7929 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -31,7 +31,7 @@ char i40evf_driver_name[] = "i40evf";
 static const char i40evf_driver_string[] =
 	"Intel(R) XL710 X710 Virtual Function Network Driver";
 
-#define DRV_VERSION "0.9.12"
+#define DRV_VERSION "0.9.13"
 const char i40evf_driver_version[] = DRV_VERSION;
 static const char i40evf_copyright[] =
 	"Copyright (c) 2013 - 2014 Intel Corporation.";
-- 
cgit v1.2.2


From fde73834eadb56962fd3b00f231ce58de5f00170 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Wed, 12 Feb 2014 22:02:38 +0100
Subject: iwlwifi: nvm: remove reading valid antennas from NVM

These values aren't used as the firmware values should be used,
so reading them is pointless and hides potential errors when
somebody uses these values. Leave them zero to make it clearer
that they can't be used. We can't remove the struct members as
the DVM driver does read the values from EEPROM/OTP and the
structure is shared between drivers.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-nvm-parse.c | 17 -----------------
 drivers/net/wireless/iwlwifi/mvm/fw.c        |  2 --
 2 files changed, 19 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
index 80c40967cd35..eeb3a838c1bd 100644
--- a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
+++ b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
@@ -425,8 +425,6 @@ static void iwl_set_radio_cfg(const struct iwl_cfg *cfg,
 		data->radio_cfg_step = NVM_RF_CFG_STEP_MSK(radio_cfg);
 		data->radio_cfg_dash = NVM_RF_CFG_DASH_MSK(radio_cfg);
 		data->radio_cfg_pnum = NVM_RF_CFG_PNUM_MSK(radio_cfg);
-		data->valid_tx_ant = NVM_RF_CFG_TX_ANT_MSK(radio_cfg);
-		data->valid_rx_ant = NVM_RF_CFG_RX_ANT_MSK(radio_cfg);
 		return;
 	}
 
@@ -435,8 +433,6 @@ static void iwl_set_radio_cfg(const struct iwl_cfg *cfg,
 	data->radio_cfg_step = NVM_RF_CFG_STEP_MSK_FAMILY_8000(radio_cfg);
 	data->radio_cfg_dash = NVM_RF_CFG_DASH_MSK_FAMILY_8000(radio_cfg);
 	data->radio_cfg_pnum = NVM_RF_CFG_FLAVOR_MSK_FAMILY_8000(radio_cfg);
-	data->valid_tx_ant = NVM_RF_CFG_TX_ANT_MSK_FAMILY_8000(radio_cfg);
-	data->valid_rx_ant = NVM_RF_CFG_RX_ANT_MSK_FAMILY_8000(radio_cfg);
 }
 
 static void iwl_set_hw_address(const struct iwl_cfg *cfg,
@@ -496,19 +492,6 @@ iwl_parse_nvm_data(struct device *dev, const struct iwl_cfg *cfg,
 	if (iwlwifi_mod_params.disable_11n & IWL_DISABLE_HT_ALL)
 		data->sku_cap_11n_enable = false;
 
-	/* check overrides (some devices have wrong NVM) */
-	if (cfg->valid_tx_ant)
-		data->valid_tx_ant = cfg->valid_tx_ant;
-	if (cfg->valid_rx_ant)
-		data->valid_rx_ant = cfg->valid_rx_ant;
-
-	if (!data->valid_tx_ant || !data->valid_rx_ant) {
-		IWL_ERR_DEV(dev, "invalid antennas (0x%x, 0x%x)\n",
-			    data->valid_tx_ant, data->valid_rx_ant);
-		kfree(data);
-		return NULL;
-	}
-
 	data->n_hw_addrs = iwl_get_n_hw_addrs(cfg, nvm_sw);
 
 	if (cfg->device_family != IWL_DEVICE_FAMILY_8000) {
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw.c b/drivers/net/wireless/iwlwifi/mvm/fw.c
index 979b35bae056..93e1b4d64869 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw.c
+++ b/drivers/net/wireless/iwlwifi/mvm/fw.c
@@ -358,8 +358,6 @@ out:
 					GFP_KERNEL);
 		if (!mvm->nvm_data)
 			return -ENOMEM;
-		mvm->nvm_data->valid_rx_ant = 1;
-		mvm->nvm_data->valid_tx_ant = 1;
 		mvm->nvm_data->bands[0].channels = mvm->nvm_data->channels;
 		mvm->nvm_data->bands[0].n_channels = 1;
 		mvm->nvm_data->bands[0].n_bitrates = 1;
-- 
cgit v1.2.2


From d6cb37a35932d179a58f20b5ad6806d8592d36b4 Mon Sep 17 00:00:00 2001
From: Inbal Hacohen <Inbal.Hacohen@intel.com>
Date: Sun, 23 Feb 2014 10:34:11 +0200
Subject: iwlwifi: mvm: remove redundant define in fw.c

This define is a leftover from dvm (in mvm, it
was replaced by MVM_UCODE_ALIVE_TIMEOUT).

Signed-off-by: Inbal Hacohen <Inbal.Hacohen@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/fw.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/fw.c b/drivers/net/wireless/iwlwifi/mvm/fw.c
index 93e1b4d64869..7ce20062f32d 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw.c
+++ b/drivers/net/wireless/iwlwifi/mvm/fw.c
@@ -369,8 +369,6 @@ out:
 	return ret;
 }
 
-#define UCODE_CALIB_TIMEOUT	(2*HZ)
-
 int iwl_mvm_up(struct iwl_mvm *mvm)
 {
 	int ret, i;
-- 
cgit v1.2.2


From a2978b1162c5a55f8411e34519d343713e8ec7a3 Mon Sep 17 00:00:00 2001
From: Eran Harary <eran.harary@intel.com>
Date: Thu, 20 Feb 2014 11:00:01 +0200
Subject: iwlwifi: mvm: prepare infrastructure for more TLV flags

We use the TLV flags as a handshake between the firmware
and the driver. These flags allow the firmware to advertise
its capabilities and API version.
Since we are running short of bits, we add a new
infrastructure which is more scalable, yet backward
compatible.

We make now the difference between API changes and the
capabilities. Both can have an index which allows to scale
at will.

Signed-off-by: Eran Harary <eran.harary@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-drv.c     | 44 ++++++++++++++++++++++++++++++
 drivers/net/wireless/iwlwifi/iwl-fw-file.h | 17 ++++++++++++
 drivers/net/wireless/iwlwifi/iwl-fw.h      |  4 +++
 3 files changed, 65 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-drv.c b/drivers/net/wireless/iwlwifi/iwl-drv.c
index 662d9936485c..d49e9b9ac06a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-drv.c
+++ b/drivers/net/wireless/iwlwifi/iwl-drv.c
@@ -404,6 +404,38 @@ static int iwl_set_default_calib(struct iwl_drv *drv, const u8 *data)
 	return 0;
 }
 
+static int iwl_set_ucode_api_flags(struct iwl_drv *drv, const u8 *data,
+				   struct iwl_ucode_capabilities *capa)
+{
+	const struct iwl_ucode_api *ucode_api = (void *)data;
+	u32 api_index = le32_to_cpu(ucode_api->api_index);
+
+	if (api_index >= IWL_API_ARRAY_SIZE) {
+		IWL_ERR(drv, "api_index larger than supported by driver\n");
+		return -EINVAL;
+	}
+
+	capa->api[api_index] = le32_to_cpu(ucode_api->api_flags);
+
+	return 0;
+}
+
+static int iwl_set_ucode_capabilities(struct iwl_drv *drv, const u8 *data,
+				      struct iwl_ucode_capabilities *capa)
+{
+	const struct iwl_ucode_capa *ucode_capa = (void *)data;
+	u32 api_index = le32_to_cpu(ucode_capa->api_index);
+
+	if (api_index >= IWL_CAPABILITIES_ARRAY_SIZE) {
+		IWL_ERR(drv, "api_index larger than supported by driver\n");
+		return -EINVAL;
+	}
+
+	capa->capa[api_index] = le32_to_cpu(ucode_capa->api_capa);
+
+	return 0;
+}
+
 static int iwl_parse_v1_v2_firmware(struct iwl_drv *drv,
 				    const struct firmware *ucode_raw,
 				    struct iwl_firmware_pieces *pieces)
@@ -638,6 +670,18 @@ static int iwl_parse_tlv_firmware(struct iwl_drv *drv,
 			 */
 			capa->flags = le32_to_cpup((__le32 *)tlv_data);
 			break;
+		case IWL_UCODE_TLV_API_CHANGES_SET:
+			if (tlv_len != sizeof(struct iwl_ucode_api))
+				goto invalid_tlv_len;
+			if (iwl_set_ucode_api_flags(drv, tlv_data, capa))
+				goto tlv_error;
+			break;
+		case IWL_UCODE_TLV_ENABLED_CAPABILITIES:
+			if (tlv_len != sizeof(struct iwl_ucode_capa))
+				goto invalid_tlv_len;
+			if (iwl_set_ucode_capabilities(drv, tlv_data, capa))
+				goto tlv_error;
+			break;
 		case IWL_UCODE_TLV_INIT_EVTLOG_PTR:
 			if (tlv_len != sizeof(u32))
 				goto invalid_tlv_len;
diff --git a/drivers/net/wireless/iwlwifi/iwl-fw-file.h b/drivers/net/wireless/iwlwifi/iwl-fw-file.h
index 88e2d6eb569f..b45e576a4b57 100644
--- a/drivers/net/wireless/iwlwifi/iwl-fw-file.h
+++ b/drivers/net/wireless/iwlwifi/iwl-fw-file.h
@@ -126,6 +126,8 @@ enum iwl_ucode_tlv_type {
 	IWL_UCODE_TLV_SECURE_SEC_WOWLAN	= 26,
 	IWL_UCODE_TLV_NUM_OF_CPU	= 27,
 	IWL_UCODE_TLV_CSCHEME		= 28,
+	IWL_UCODE_TLV_API_CHANGES_SET	= 29,
+	IWL_UCODE_TLV_ENABLED_CAPABILITIES	= 30,
 };
 
 struct iwl_ucode_tlv {
@@ -158,4 +160,19 @@ struct iwl_tlv_ucode_header {
 	u8 data[0];
 };
 
+/*
+ * ucode TLVs
+ *
+ * ability to get extension for: flags & capabilities from ucode binaries files
+ */
+struct iwl_ucode_api {
+	__le32 api_index;
+	__le32 api_flags;
+} __packed;
+
+struct iwl_ucode_capa {
+	__le32 api_index;
+	__le32 api_capa;
+} __packed;
+
 #endif  /* __iwl_fw_file_h__ */
diff --git a/drivers/net/wireless/iwlwifi/iwl-fw.h b/drivers/net/wireless/iwlwifi/iwl-fw.h
index af6b4528d499..f04ff871dc6d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-fw.h
+++ b/drivers/net/wireless/iwlwifi/iwl-fw.h
@@ -165,11 +165,15 @@ enum iwl_ucode_sec {
  * just an offset to the HW address.
  */
 #define IWL_UCODE_SECTION_MAX 12
+#define IWL_API_ARRAY_SIZE	1
+#define IWL_CAPABILITIES_ARRAY_SIZE	1
 
 struct iwl_ucode_capabilities {
 	u32 max_probe_length;
 	u32 standard_phy_calibration_size;
 	u32 flags;
+	u32 api[IWL_API_ARRAY_SIZE];
+	u32 capa[IWL_CAPABILITIES_ARRAY_SIZE];
 };
 
 /* one for each uCode image (inst/data, init/runtime/wowlan) */
-- 
cgit v1.2.2


From 82b715c211a53e80a1db83b9b71995a05fe32908 Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Tue, 11 Feb 2014 16:54:42 +0200
Subject: iwlwifi: mvm: fix a few wd_disable comments

Few minor comments.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-drv.c       | 3 +--
 drivers/net/wireless/iwlwifi/iwl-modparams.h | 2 +-
 2 files changed, 2 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-drv.c b/drivers/net/wireless/iwlwifi/iwl-drv.c
index d49e9b9ac06a..847a0eded40a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-drv.c
+++ b/drivers/net/wireless/iwlwifi/iwl-drv.c
@@ -1351,8 +1351,7 @@ MODULE_PARM_DESC(antenna_coupling,
 
 module_param_named(wd_disable, iwlwifi_mod_params.wd_disable, int, S_IRUGO);
 MODULE_PARM_DESC(wd_disable,
-		"Disable stuck queue watchdog timer 0=system default, "
-		"1=disable, 2=enable (default: 0)");
+		"Disable stuck queue watchdog timer 0=system default, 1=disable (default: 1)");
 
 module_param_named(nvm_file, iwlwifi_mod_params.nvm_file, charp, S_IRUGO);
 MODULE_PARM_DESC(nvm_file, "NVM file name");
diff --git a/drivers/net/wireless/iwlwifi/iwl-modparams.h b/drivers/net/wireless/iwlwifi/iwl-modparams.h
index 0a84ade7edac..1d100f24804c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-modparams.h
+++ b/drivers/net/wireless/iwlwifi/iwl-modparams.h
@@ -93,7 +93,7 @@ enum iwl_power_level {
  *	use IWL_DISABLE_HT_* constants
  * @amsdu_size_8K: enable 8K amsdu size, default = 0
  * @restart_fw: restart firmware, default = 1
- * @wd_disable: enable stuck queue check, default = 0
+ * @wd_disable: disable stuck queue check, default = 1
  * @bt_coex_active: enable bt coex, default = true
  * @led_mode: system default, default = 0
  * @power_save: disable power save, default = false
-- 
cgit v1.2.2


From c42c65c1d5863bca54e45ea25ecb24a3def29f59 Mon Sep 17 00:00:00 2001
From: Dan Carpenter <dan.carpenter@oracle.com>
Date: Fri, 14 Feb 2014 12:03:13 +0300
Subject: mwifiex: memory corruption in mwifiex_tdls_add_vht_capab()

There is a typo here because the names are confusingly similar.  The
intent was sizeof(struct ieee80211_vht_cap) (size 12) but sizeof(struct
ieee80211_ht_cap) (size 32) was used.

Anway, it's cleaner to just specify the variable instead of the type.

Fixes: 5f6d5983394f ('mwifiex: add VHT support for TDLS')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/tdls.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/tdls.c b/drivers/net/wireless/mwifiex/tdls.c
index 5efd456af571..1ba2a16ee471 100644
--- a/drivers/net/wireless/mwifiex/tdls.c
+++ b/drivers/net/wireless/mwifiex/tdls.c
@@ -180,7 +180,7 @@ static int mwifiex_tdls_add_vht_capab(struct mwifiex_private *priv,
 	memset(&vht_cap, 0, sizeof(struct ieee80211_vht_cap));
 
 	mwifiex_fill_vht_cap_tlv(priv, &vht_cap, priv->curr_bss_params.band);
-	memcpy(pos, &vht_cap, sizeof(struct ieee80211_ht_cap));
+	memcpy(pos, &vht_cap, sizeof(vht_cap));
 
 	return 0;
 }
-- 
cgit v1.2.2


From e51048cdf0bdf1358c39839eabb22a06674af9ed Mon Sep 17 00:00:00 2001
From: Peter Wu <lekensteyn@gmail.com>
Date: Fri, 14 Feb 2014 19:03:44 +0100
Subject: rtlwifi: avoid accessing RCR directly

The rtl*_set_check_bssid functions are mostly the same, but access the
RCR register in different ways. Use the get_hw_reg abstraction layer
(which reads rtlpci->receive_config for PCI devices and mac->rx_conf for
USB).

There is no functional change for cases where receive_config was
accessed directly. For rtl8192ce, there is still no change because
nothing modifies REG_RCR or receive_config. For rtl8192cu, it now also
applies changes to rx_conf from configure_filter, but that can be
considered a bug which is fixed later.

Signed-off-by: Peter Wu <lekensteyn@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtlwifi/rtl8188ee/hw.c | 5 +++--
 drivers/net/wireless/rtlwifi/rtl8192ce/hw.c | 4 +++-
 drivers/net/wireless/rtlwifi/rtl8192cu/hw.c | 4 +++-
 drivers/net/wireless/rtlwifi/rtl8192de/hw.c | 6 ++++--
 drivers/net/wireless/rtlwifi/rtl8192se/hw.c | 5 +++--
 drivers/net/wireless/rtlwifi/rtl8723ae/hw.c | 5 +++--
 6 files changed, 19 insertions(+), 10 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/hw.c b/drivers/net/wireless/rtlwifi/rtl8188ee/hw.c
index e06971be7df7..ce2226cd2e4f 100644
--- a/drivers/net/wireless/rtlwifi/rtl8188ee/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8188ee/hw.c
@@ -1235,12 +1235,13 @@ static int _rtl88ee_set_media_status(struct ieee80211_hw *hw,
 void rtl88ee_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid)
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
-	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
-	u32 reg_rcr = rtlpci->receive_config;
+	u32 reg_rcr;
 
 	if (rtlpriv->psc.rfpwr_state != ERFON)
 		return;
 
+	rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_RCR, (u8 *)(&reg_rcr));
+
 	if (check_bssid == true) {
 		reg_rcr |= (RCR_CBSSID_DATA | RCR_CBSSID_BCN);
 		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR,
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c
index a82b30a1996c..25e178c80d70 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c
@@ -1200,11 +1200,13 @@ static int _rtl92ce_set_media_status(struct ieee80211_hw *hw,
 void rtl92ce_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid)
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
-	u32 reg_rcr = rtl_read_dword(rtlpriv, REG_RCR);
+	u32 reg_rcr;
 
 	if (rtlpriv->psc.rfpwr_state != ERFON)
 		return;
 
+	rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_RCR, (u8 *)(&reg_rcr));
+
 	if (check_bssid) {
 		reg_rcr |= (RCR_CBSSID_DATA | RCR_CBSSID_BCN);
 		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR,
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
index 468bf73cc883..49ad10668078 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
@@ -1379,11 +1379,13 @@ void rtl92cu_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid)
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
 	struct rtl_hal *rtlhal = rtl_hal(rtlpriv);
-	u32 reg_rcr = rtl_read_dword(rtlpriv, REG_RCR);
+	u32 reg_rcr;
 
 	if (rtlpriv->psc.rfpwr_state != ERFON)
 		return;
 
+	rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_RCR, (u8 *)(&reg_rcr));
+
 	if (check_bssid) {
 		u8 tmp;
 		if (IS_NORMAL_CHIP(rtlhal->version)) {
diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/hw.c b/drivers/net/wireless/rtlwifi/rtl8192de/hw.c
index c4a7db9135d6..c16aa6b59527 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192de/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192de/hw.c
@@ -1138,11 +1138,13 @@ static int _rtl92de_set_media_status(struct ieee80211_hw *hw,
 void rtl92de_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid)
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
-	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
-	u32 reg_rcr = rtlpci->receive_config;
+	u32 reg_rcr;
 
 	if (rtlpriv->psc.rfpwr_state != ERFON)
 		return;
+
+	rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_RCR, (u8 *)(&reg_rcr));
+
 	if (check_bssid) {
 		reg_rcr |= (RCR_CBSSID_DATA | RCR_CBSSID_BCN);
 		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *)(&reg_rcr));
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/hw.c b/drivers/net/wireless/rtlwifi/rtl8192se/hw.c
index 4f461786a7eb..5aa39ef42eba 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192se/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/hw.c
@@ -1135,12 +1135,13 @@ void rtl92se_set_mac_addr(struct rtl_io *io, const u8 *addr)
 void rtl92se_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid)
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
-	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
-	u32 reg_rcr = rtlpci->receive_config;
+	u32 reg_rcr;
 
 	if (rtlpriv->psc.rfpwr_state != ERFON)
 		return;
 
+	rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_RCR, (u8 *)(&reg_rcr));
+
 	if (check_bssid) {
 		reg_rcr |= (RCR_CBSSID);
 		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *)(&reg_rcr));
diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c b/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c
index c333dfd116b8..4680816f9597 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c
@@ -1112,12 +1112,13 @@ static int _rtl8723ae_set_media_status(struct ieee80211_hw *hw,
 void rtl8723ae_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid)
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
-	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
-	u32 reg_rcr = rtlpci->receive_config;
+	u32 reg_rcr;
 
 	if (rtlpriv->psc.rfpwr_state != ERFON)
 		return;
 
+	rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_RCR, (u8 *)(&reg_rcr));
+
 	if (check_bssid == true) {
 		reg_rcr |= (RCR_CBSSID_DATA | RCR_CBSSID_BCN);
 		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR,
-- 
cgit v1.2.2


From 711f145ad0e93a914644d3e7998c28267bd3c136 Mon Sep 17 00:00:00 2001
From: Peter Wu <lekensteyn@gmail.com>
Date: Fri, 14 Feb 2014 19:03:45 +0100
Subject: rtlwifi: properly apply filter flags

commit 0baa0fd76f3f5a134461d6cf30294f6bb1bb824c
("rtlwifi: Convert core routines for addition of rtl8192se and
rtl8192de") removed setting HW_VAR_RCR, HW_VAR_MGT_FILTER and
HW_VAR_CTRL_FILTER. The last two are probably done because some hardware
does not support them. The first is probably a mistake. This patch adds
the missing set_hw_reg call.

For PCI support, rx_conf is not touched directly. Instead, get_hw_reg is
used to abstract between receive_config (for PCI) and rx_conf (for USB).

This was tested on a 10ec:8176 Realtek RTL8188CE (according to the
label on the mini-PCIe card). Before this patch, `iw wlan0 set monitor
otherbss` did not capture frames from other BSS's. After this patch, it
does print packets.

Tested-by: Peter Wu <lekensteyn@gmail.com>
Signed-off-by: Peter Wu <lekensteyn@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtlwifi/core.c | 52 +++++++++++++++++++++----------------
 1 file changed, 30 insertions(+), 22 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtlwifi/core.c b/drivers/net/wireless/rtlwifi/core.c
index 2d337a0c3df0..6df4df090b73 100644
--- a/drivers/net/wireless/rtlwifi/core.c
+++ b/drivers/net/wireless/rtlwifi/core.c
@@ -475,20 +475,40 @@ static void rtl_op_configure_filter(struct ieee80211_hw *hw,
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
 	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	u32 rx_conf;
 
 	*new_flags &= RTL_SUPPORTED_FILTERS;
 	if (!changed_flags)
 		return;
 
+	/* if ssid not set to hw don't check bssid
+	 * here just used for linked scanning, & linked
+	 * and nolink check bssid is set in set network_type */
+	if ((changed_flags & FIF_BCN_PRBRESP_PROMISC) &&
+		(mac->link_state >= MAC80211_LINKED)) {
+		if (mac->opmode != NL80211_IFTYPE_AP &&
+		    mac->opmode != NL80211_IFTYPE_MESH_POINT) {
+			if (*new_flags & FIF_BCN_PRBRESP_PROMISC) {
+				rtlpriv->cfg->ops->set_chk_bssid(hw, false);
+			} else {
+				rtlpriv->cfg->ops->set_chk_bssid(hw, true);
+			}
+		}
+	}
+
+	/* must be called after set_chk_bssid since that function modifies the
+	 * RCR register too. */
+	rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_RCR, (u8 *)(&rx_conf));
+
 	/*TODO: we disable broadcase now, so enable here */
 	if (changed_flags & FIF_ALLMULTI) {
 		if (*new_flags & FIF_ALLMULTI) {
-			mac->rx_conf |= rtlpriv->cfg->maps[MAC_RCR_AM] |
+			rx_conf |= rtlpriv->cfg->maps[MAC_RCR_AM] |
 			    rtlpriv->cfg->maps[MAC_RCR_AB];
 			RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
 				 "Enable receive multicast frame\n");
 		} else {
-			mac->rx_conf &= ~(rtlpriv->cfg->maps[MAC_RCR_AM] |
+			rx_conf &= ~(rtlpriv->cfg->maps[MAC_RCR_AM] |
 					  rtlpriv->cfg->maps[MAC_RCR_AB]);
 			RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
 				 "Disable receive multicast frame\n");
@@ -497,39 +517,25 @@ static void rtl_op_configure_filter(struct ieee80211_hw *hw,
 
 	if (changed_flags & FIF_FCSFAIL) {
 		if (*new_flags & FIF_FCSFAIL) {
-			mac->rx_conf |= rtlpriv->cfg->maps[MAC_RCR_ACRC32];
+			rx_conf |= rtlpriv->cfg->maps[MAC_RCR_ACRC32];
 			RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
 				 "Enable receive FCS error frame\n");
 		} else {
-			mac->rx_conf &= ~rtlpriv->cfg->maps[MAC_RCR_ACRC32];
+			rx_conf &= ~rtlpriv->cfg->maps[MAC_RCR_ACRC32];
 			RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
 				 "Disable receive FCS error frame\n");
 		}
 	}
 
-	/* if ssid not set to hw don't check bssid
-	 * here just used for linked scanning, & linked
-	 * and nolink check bssid is set in set network_type */
-	if ((changed_flags & FIF_BCN_PRBRESP_PROMISC) &&
-		(mac->link_state >= MAC80211_LINKED)) {
-		if (mac->opmode != NL80211_IFTYPE_AP &&
-		    mac->opmode != NL80211_IFTYPE_MESH_POINT) {
-			if (*new_flags & FIF_BCN_PRBRESP_PROMISC) {
-				rtlpriv->cfg->ops->set_chk_bssid(hw, false);
-			} else {
-				rtlpriv->cfg->ops->set_chk_bssid(hw, true);
-			}
-		}
-	}
 
 	if (changed_flags & FIF_CONTROL) {
 		if (*new_flags & FIF_CONTROL) {
-			mac->rx_conf |= rtlpriv->cfg->maps[MAC_RCR_ACF];
+			rx_conf |= rtlpriv->cfg->maps[MAC_RCR_ACF];
 
 			RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
 				 "Enable receive control frame\n");
 		} else {
-			mac->rx_conf &= ~rtlpriv->cfg->maps[MAC_RCR_ACF];
+			rx_conf &= ~rtlpriv->cfg->maps[MAC_RCR_ACF];
 			RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
 				 "Disable receive control frame\n");
 		}
@@ -537,15 +543,17 @@ static void rtl_op_configure_filter(struct ieee80211_hw *hw,
 
 	if (changed_flags & FIF_OTHER_BSS) {
 		if (*new_flags & FIF_OTHER_BSS) {
-			mac->rx_conf |= rtlpriv->cfg->maps[MAC_RCR_AAP];
+			rx_conf |= rtlpriv->cfg->maps[MAC_RCR_AAP];
 			RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
 				 "Enable receive other BSS's frame\n");
 		} else {
-			mac->rx_conf &= ~rtlpriv->cfg->maps[MAC_RCR_AAP];
+			rx_conf &= ~rtlpriv->cfg->maps[MAC_RCR_AAP];
 			RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
 				 "Disable receive other BSS's frame\n");
 		}
 	}
+
+	rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *)(&rx_conf));
 }
 static int rtl_op_sta_add(struct ieee80211_hw *hw,
 			 struct ieee80211_vif *vif,
-- 
cgit v1.2.2


From cc1ad9d267d336fcb50c26c9e3fe1a9b78302e78 Mon Sep 17 00:00:00 2001
From: "Zhao, Gang" <gamerh2o@gmail.com>
Date: Sun, 16 Feb 2014 22:31:37 +0800
Subject: b43: Kconfig: let config B43_BCMA_PIO depends on B43

Logically, config B43_BCMA_PIO should depend on B43. This also solves
the problem that sub options of b43 driver didn't indent correctly in
make menuconfig's ncurses window.

Signed-off-by: Zhao, Gang <gamerh2o@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig
index 51ff0b198d0a..088d544ec63f 100644
--- a/drivers/net/wireless/b43/Kconfig
+++ b/drivers/net/wireless/b43/Kconfig
@@ -92,7 +92,7 @@ config B43_SDIO
 # if we can do DMA.
 config B43_BCMA_PIO
 	bool
-	depends on B43_BCMA
+	depends on B43 && B43_BCMA
 	select BCMA_BLOCKIO
 	default y
 
-- 
cgit v1.2.2


From 1a2b250bfe32c780fe371feff56c6bd6117097fa Mon Sep 17 00:00:00 2001
From: "Zhao, Gang" <gamerh2o@gmail.com>
Date: Sun, 16 Feb 2014 22:31:38 +0800
Subject: b43: return true / false instead of numbers in functions which return
 bool value

Signed-off-by: Zhao, Gang <gamerh2o@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/debugfs.h    |  2 +-
 drivers/net/wireless/b43/phy_common.c |  4 ++--
 drivers/net/wireless/b43/pio.c        | 10 +++++-----
 3 files changed, 8 insertions(+), 8 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/debugfs.h b/drivers/net/wireless/b43/debugfs.h
index 822aad8842f4..50517b801cb4 100644
--- a/drivers/net/wireless/b43/debugfs.h
+++ b/drivers/net/wireless/b43/debugfs.h
@@ -86,7 +86,7 @@ void b43_debugfs_log_txstat(struct b43_wldev *dev,
 
 static inline bool b43_debug(struct b43_wldev *dev, enum b43_dyndbg feature)
 {
-	return 0;
+	return false;
 }
 
 static inline void b43_debugfs_init(void)
diff --git a/drivers/net/wireless/b43/phy_common.c b/drivers/net/wireless/b43/phy_common.c
index f01676ac481b..dbaa51890198 100644
--- a/drivers/net/wireless/b43/phy_common.c
+++ b/drivers/net/wireless/b43/phy_common.c
@@ -133,9 +133,9 @@ void b43_phy_exit(struct b43_wldev *dev)
 bool b43_has_hardware_pctl(struct b43_wldev *dev)
 {
 	if (!dev->phy.hardware_power_control)
-		return 0;
+		return false;
 	if (!dev->phy.ops->supports_hwpctl)
-		return 0;
+		return false;
 	return dev->phy.ops->supports_hwpctl(dev);
 }
 
diff --git a/drivers/net/wireless/b43/pio.c b/drivers/net/wireless/b43/pio.c
index a73ff8c9deb5..a4ff5e2a42b9 100644
--- a/drivers/net/wireless/b43/pio.c
+++ b/drivers/net/wireless/b43/pio.c
@@ -637,7 +637,7 @@ static bool pio_rx_frame(struct b43_pio_rxqueue *q)
 
 		ctl = b43_piorx_read32(q, B43_PIO8_RXCTL);
 		if (!(ctl & B43_PIO8_RXCTL_FRAMERDY))
-			return 0;
+			return false;
 		b43_piorx_write32(q, B43_PIO8_RXCTL,
 				  B43_PIO8_RXCTL_FRAMERDY);
 		for (i = 0; i < 10; i++) {
@@ -651,7 +651,7 @@ static bool pio_rx_frame(struct b43_pio_rxqueue *q)
 
 		ctl = b43_piorx_read16(q, B43_PIO_RXCTL);
 		if (!(ctl & B43_PIO_RXCTL_FRAMERDY))
-			return 0;
+			return false;
 		b43_piorx_write16(q, B43_PIO_RXCTL,
 				  B43_PIO_RXCTL_FRAMERDY);
 		for (i = 0; i < 10; i++) {
@@ -662,7 +662,7 @@ static bool pio_rx_frame(struct b43_pio_rxqueue *q)
 		}
 	}
 	b43dbg(q->dev->wl, "PIO RX timed out\n");
-	return 1;
+	return true;
 data_ready:
 
 	/* Get the preamble (RX header) */
@@ -759,7 +759,7 @@ data_ready:
 
 	b43_rx(q->dev, skb, rxhdr);
 
-	return 1;
+	return true;
 
 rx_error:
 	if (err_msg)
@@ -769,7 +769,7 @@ rx_error:
 	else
 		b43_piorx_write16(q, B43_PIO_RXCTL, B43_PIO_RXCTL_DATARDY);
 
-	return 1;
+	return true;
 }
 
 void b43_pio_rx(struct b43_pio_rxqueue *q)
-- 
cgit v1.2.2


From da1bc3c4888c31e0b8a8bd4703bb1e7ed42f3be4 Mon Sep 17 00:00:00 2001
From: Sachin Kamat <sachin.kamat@linaro.org>
Date: Mon, 17 Feb 2014 15:25:01 +0530
Subject: net: wireless: wl3501_cs: Remove duplicate include

linux/etherdevice.h was included twice.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl3501_cs.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index d24d4a958c67..66bca677c4fa 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -43,7 +43,6 @@
 #include <linux/string.h>
 #include <linux/wireless.h>
 #include <linux/ieee80211.h>
-#include <linux/etherdevice.h>
 
 #include <net/iw_handler.h>
 
-- 
cgit v1.2.2


From 0867c8874ef0f32aa0ef4f7d7aef0a0109d939a5 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?C=C3=A9dric=20Le=20Goater?= <clg@fr.ibm.com>
Date: Tue, 18 Feb 2014 10:07:52 +0100
Subject: hostap: add Netgear MA401 card
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This is a relatively old Prism2 card which is correctly supported
by the hostap driver.

Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/hostap/hostap_cs.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index 9f825f2620da..b6ec51923b20 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -677,6 +677,8 @@ static const struct pcmcia_device_id hostap_cs_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12(
 		"ZoomAir 11Mbps High", "Rate wireless Networking",
 		0x273fe3db, 0x32a1eaee),
+	PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401 Wireless PC", "Card",
+		0xa37434e9, 0x9762e8f1),
 	PCMCIA_DEVICE_PROD_ID123(
 		"Pretec", "CompactWLAN Card 802.11b", "2.5",
 		0x1cadd3e5, 0xe697636c, 0x7a5bfcf1),
-- 
cgit v1.2.2


From 16847f47bab6f23fbaf17c5beeb0db1db0836b6a Mon Sep 17 00:00:00 2001
From: Avinash kumar <avi.kp.137@gmail.com>
Date: Tue, 18 Feb 2014 17:04:10 +0530
Subject: drivers:net:wireless:airo.c:checkpatch.pl cleanup

removed following warnings-
drivers/net/wireless/airo.c:39: WARNING: Use #include <linux/io.h> instead of <asm/io.h>
drivers/net/wireless/airo.c:48: WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h>

Signed-off-by: Avinash Kumar <avi.kp.137@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/airo.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index edf4b57c4aaa..79c4a7692d50 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -36,7 +36,7 @@
 #include <linux/bitops.h>
 #include <linux/scatterlist.h>
 #include <linux/crypto.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <asm/unaligned.h>
 
 #include <linux/netdevice.h>
@@ -45,7 +45,7 @@
 #include <linux/if_arp.h>
 #include <linux/ioport.h>
 #include <linux/pci.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #include <linux/kthread.h>
 #include <linux/freezer.h>
 
-- 
cgit v1.2.2


From 7b4f663ee60d24f791aeb4d58569fa18c59fc440 Mon Sep 17 00:00:00 2001
From: Jouni Malinen <jouni@qca.qualcomm.com>
Date: Tue, 18 Feb 2014 20:41:08 +0200
Subject: ath9k: Enable U-APSD AP mode support

mac80211 handles the actual operations, so ath9k can just indicate
support for this. Based on initial tests, this combination seems to
work fine.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/init.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 07a0315dd2f6..4856a1739ade 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -949,6 +949,7 @@ static void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
 	hw->wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL;
 	hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_5_10_MHZ;
 	hw->wiphy->flags |= WIPHY_FLAG_HAS_CHANNEL_SWITCH;
+	hw->wiphy->flags |= WIPHY_FLAG_AP_UAPSD;
 
 	hw->queues = 4;
 	hw->max_rates = 4;
-- 
cgit v1.2.2


From 629873f22eadcd29f47969822eb640d3690116c8 Mon Sep 17 00:00:00 2001
From: Avinash Patil <patila@marvell.com>
Date: Tue, 18 Feb 2014 15:47:55 -0800
Subject: mwifiex: use del_timer_sync instead of del_timer

Use SMP safe del_timer_sync instead of del_timer for cancelling
timers.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/11n_rxreorder.c | 2 +-
 drivers/net/wireless/mwifiex/cmdevt.c        | 2 +-
 drivers/net/wireless/mwifiex/init.c          | 2 +-
 drivers/net/wireless/mwifiex/main.c          | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/11n_rxreorder.c b/drivers/net/wireless/mwifiex/11n_rxreorder.c
index b361257fb65e..1cfdbfe2b59f 100644
--- a/drivers/net/wireless/mwifiex/11n_rxreorder.c
+++ b/drivers/net/wireless/mwifiex/11n_rxreorder.c
@@ -142,7 +142,7 @@ mwifiex_del_rx_reorder_entry(struct mwifiex_private *priv,
 	mwifiex_11n_dispatch_pkt(priv, tbl, (tbl->start_win + tbl->win_size) &
 					    (MAX_TID_VALUE - 1));
 
-	del_timer(&tbl->timer_context.timer);
+	del_timer_sync(&tbl->timer_context.timer);
 
 	spin_lock_irqsave(&priv->rx_reorder_tbl_lock, flags);
 	list_del(&tbl->list);
diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c
index 21544602043c..f4faeaf322be 100644
--- a/drivers/net/wireless/mwifiex/cmdevt.c
+++ b/drivers/net/wireless/mwifiex/cmdevt.c
@@ -786,7 +786,7 @@ int mwifiex_process_cmdresp(struct mwifiex_adapter *adapter)
 	unsigned long flags;
 
 	/* Now we got response from FW, cancel the command timer */
-	del_timer(&adapter->cmd_timer);
+	del_timer_sync(&adapter->cmd_timer);
 
 	if (!adapter->curr_cmd || !adapter->curr_cmd->resp_skb) {
 		resp = (struct host_cmd_ds_command *) adapter->upld_buf;
diff --git a/drivers/net/wireless/mwifiex/init.c b/drivers/net/wireless/mwifiex/init.c
index a4cd2cb066ed..759492817aeb 100644
--- a/drivers/net/wireless/mwifiex/init.c
+++ b/drivers/net/wireless/mwifiex/init.c
@@ -620,7 +620,7 @@ mwifiex_shutdown_drv(struct mwifiex_adapter *adapter)
 	/* cancel current command */
 	if (adapter->curr_cmd) {
 		dev_warn(adapter->dev, "curr_cmd is still in processing\n");
-		del_timer(&adapter->cmd_timer);
+		del_timer_sync(&adapter->cmd_timer);
 		mwifiex_recycle_cmd_node(adapter, adapter->curr_cmd);
 		adapter->curr_cmd = NULL;
 	}
diff --git a/drivers/net/wireless/mwifiex/main.c b/drivers/net/wireless/mwifiex/main.c
index 4d79761b9c87..f87ce28a8060 100644
--- a/drivers/net/wireless/mwifiex/main.c
+++ b/drivers/net/wireless/mwifiex/main.c
@@ -194,7 +194,7 @@ static int mwifiex_unregister(struct mwifiex_adapter *adapter)
 	if (adapter->if_ops.cleanup_if)
 		adapter->if_ops.cleanup_if(adapter);
 
-	del_timer(&adapter->cmd_timer);
+	del_timer_sync(&adapter->cmd_timer);
 
 	/* Free private structures */
 	for (i = 0; i < adapter->priv_num; i++) {
-- 
cgit v1.2.2


From c1c2ce0ce3ffb4989506e03247ee80949a0bfa25 Mon Sep 17 00:00:00 2001
From: Avinash Patil <patila@marvell.com>
Date: Tue, 18 Feb 2014 15:47:56 -0800
Subject: mwifiex: remove redundant del_timer

While modifying timer, we need not delete timer.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/11n_rxreorder.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/11n_rxreorder.c b/drivers/net/wireless/mwifiex/11n_rxreorder.c
index 1cfdbfe2b59f..eb17282b364f 100644
--- a/drivers/net/wireless/mwifiex/11n_rxreorder.c
+++ b/drivers/net/wireless/mwifiex/11n_rxreorder.c
@@ -466,7 +466,6 @@ int mwifiex_11n_rx_reorder_pkt(struct mwifiex_private *priv,
 	start_win = tbl->start_win;
 	win_size = tbl->win_size;
 	end_win = ((start_win + win_size) - 1) & (MAX_TID_VALUE - 1);
-	del_timer(&tbl->timer_context.timer);
 	mod_timer(&tbl->timer_context.timer,
 		  jiffies + msecs_to_jiffies(MIN_FLUSH_TIMER_MS * win_size));
 
-- 
cgit v1.2.2


From e3c91683b5c6498df19e5fba51fdb61fef5f4227 Mon Sep 17 00:00:00 2001
From: Amitkumar Karwar <akarwar@marvell.com>
Date: Tue, 18 Feb 2014 15:47:57 -0800
Subject: mwifiex: enable obss scan offload feature flag

We don't perform OBSS scan internally. As we intend to use
corresponding feature in application, we will enable this flag.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/cfg80211.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index 6948a97af839..68c51a8e5bea 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -2908,7 +2908,8 @@ int mwifiex_register_cfg80211(struct mwifiex_adapter *adapter)
 
 	wiphy->features |= NL80211_FEATURE_HT_IBSS |
 			   NL80211_FEATURE_INACTIVITY_TIMER |
-			   NL80211_FEATURE_LOW_PRIORITY_SCAN;
+			   NL80211_FEATURE_LOW_PRIORITY_SCAN |
+			   NL80211_FEATURE_NEED_OBSS_SCAN;
 
 	/* Reserve space for mwifiex specific private data for BSS */
 	wiphy->bss_priv_size = sizeof(struct mwifiex_bss_priv);
-- 
cgit v1.2.2


From 59f01183a7846c1621a23dd88182f5a890f38717 Mon Sep 17 00:00:00 2001
From: Stanislaw Gruszka <sgruszka@redhat.com>
Date: Wed, 19 Feb 2014 09:15:09 +0100
Subject: iwl3945: fix wakeup interrupt

We have only 5 tx queues on 3945, updating il->txq[5] results in
writing random value to HBUS_TARG_WRPTR register.

Additionally use spin lock to protect txq->write_ptr and
txq->need_update fields also modified in TX path.

Tested-by: Pedro Francisco <pedrogfrancisco@gmail.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlegacy/3945-mac.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlegacy/3945-mac.c b/drivers/net/wireless/iwlegacy/3945-mac.c
index 0487461ae4da..46b32d41aa2f 100644
--- a/drivers/net/wireless/iwlegacy/3945-mac.c
+++ b/drivers/net/wireless/iwlegacy/3945-mac.c
@@ -1495,12 +1495,14 @@ il3945_irq_tasklet(struct il_priv *il)
 	if (inta & CSR_INT_BIT_WAKEUP) {
 		D_ISR("Wakeup interrupt\n");
 		il_rx_queue_update_write_ptr(il, &il->rxq);
+
+		spin_lock_irqsave(&il->lock, flags);
 		il_txq_update_write_ptr(il, &il->txq[0]);
 		il_txq_update_write_ptr(il, &il->txq[1]);
 		il_txq_update_write_ptr(il, &il->txq[2]);
 		il_txq_update_write_ptr(il, &il->txq[3]);
 		il_txq_update_write_ptr(il, &il->txq[4]);
-		il_txq_update_write_ptr(il, &il->txq[5]);
+		spin_unlock_irqrestore(&il->lock, flags);
 
 		il->isr_stats.wakeup++;
 		handled |= CSR_INT_BIT_WAKEUP;
-- 
cgit v1.2.2


From 8e67427aca2f0dda148181af930732734f6e2e42 Mon Sep 17 00:00:00 2001
From: Stanislaw Gruszka <sgruszka@redhat.com>
Date: Wed, 19 Feb 2014 09:15:10 +0100
Subject: iwlegacy: merge reclaim check

Merge reclaim check for 3945 & 4965. This add some more checks for
3945, most importantly N_RX notify.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlegacy/3945-mac.c |  9 +--------
 drivers/net/wireless/iwlegacy/4965-mac.c | 12 +-----------
 drivers/net/wireless/iwlegacy/common.h   | 14 ++++++++++++++
 3 files changed, 16 insertions(+), 19 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlegacy/3945-mac.c b/drivers/net/wireless/iwlegacy/3945-mac.c
index 46b32d41aa2f..dc1d20cf64ee 100644
--- a/drivers/net/wireless/iwlegacy/3945-mac.c
+++ b/drivers/net/wireless/iwlegacy/3945-mac.c
@@ -1248,14 +1248,7 @@ il3945_rx_handle(struct il_priv *il)
 		len = le32_to_cpu(pkt->len_n_flags) & IL_RX_FRAME_SIZE_MSK;
 		len += sizeof(u32);	/* account for status word */
 
-		/* Reclaim a command buffer only if this packet is a response
-		 *   to a (driver-originated) command.
-		 * If the packet (e.g. Rx frame) originated from uCode,
-		 *   there is no command buffer to reclaim.
-		 * Ucode should set SEQ_RX_FRAME bit if ucode-originated,
-		 *   but apparently a few don't get set; catch them here. */
-		reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME) &&
-		    pkt->hdr.cmd != N_STATS && pkt->hdr.cmd != C_TX;
+		reclaim = il_need_reclaim(il, pkt);
 
 		/* Based on type of command response or notification,
 		 *   handle those that need handling via function in
diff --git a/drivers/net/wireless/iwlegacy/4965-mac.c b/drivers/net/wireless/iwlegacy/4965-mac.c
index 43f488a8cda2..50673f7e30bc 100644
--- a/drivers/net/wireless/iwlegacy/4965-mac.c
+++ b/drivers/net/wireless/iwlegacy/4965-mac.c
@@ -4274,17 +4274,7 @@ il4965_rx_handle(struct il_priv *il)
 		len = le32_to_cpu(pkt->len_n_flags) & IL_RX_FRAME_SIZE_MSK;
 		len += sizeof(u32);	/* account for status word */
 
-		/* Reclaim a command buffer only if this packet is a response
-		 *   to a (driver-originated) command.
-		 * If the packet (e.g. Rx frame) originated from uCode,
-		 *   there is no command buffer to reclaim.
-		 * Ucode should set SEQ_RX_FRAME bit if ucode-originated,
-		 *   but apparently a few don't get set; catch them here. */
-		reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME) &&
-		    (pkt->hdr.cmd != N_RX_PHY) && (pkt->hdr.cmd != N_RX) &&
-		    (pkt->hdr.cmd != N_RX_MPDU) &&
-		    (pkt->hdr.cmd != N_COMPRESSED_BA) &&
-		    (pkt->hdr.cmd != N_STATS) && (pkt->hdr.cmd != C_TX);
+		reclaim = il_need_reclaim(il, pkt);
 
 		/* Based on type of command response or notification,
 		 *   handle those that need handling via function in
diff --git a/drivers/net/wireless/iwlegacy/common.h b/drivers/net/wireless/iwlegacy/common.h
index ad123d66ab6c..21964d2cad83 100644
--- a/drivers/net/wireless/iwlegacy/common.h
+++ b/drivers/net/wireless/iwlegacy/common.h
@@ -1978,6 +1978,20 @@ void il_wr_prph(struct il_priv *il, u32 addr, u32 val);
 u32 il_read_targ_mem(struct il_priv *il, u32 addr);
 void il_write_targ_mem(struct il_priv *il, u32 addr, u32 val);
 
+static inline bool il_need_reclaim(struct il_priv *il, struct il_rx_pkt *pkt)
+{
+	/* Reclaim a command buffer only if this packet is a response
+	 * to a (driver-originated) command. If the packet (e.g. Rx frame)
+	 * originated from uCode, there is no command buffer to reclaim.
+	 * Ucode should set SEQ_RX_FRAME bit if ucode-originated, but
+	 * apparently a few don't get set; catch them here.
+	 */
+	return !(pkt->hdr.sequence & SEQ_RX_FRAME) &&
+	       pkt->hdr.cmd != N_STATS && pkt->hdr.cmd != C_TX &&
+	       pkt->hdr.cmd != N_RX_PHY && pkt->hdr.cmd != N_RX &&
+	       pkt->hdr.cmd != N_RX_MPDU && pkt->hdr.cmd != N_COMPRESSED_BA;
+}
+
 static inline void
 _il_write8(struct il_priv *il, u32 ofs, u8 val)
 {
-- 
cgit v1.2.2


From dbdac2b581811e1f2a573454451136c2497de4fc Mon Sep 17 00:00:00 2001
From: Stanislaw Gruszka <sgruszka@redhat.com>
Date: Wed, 19 Feb 2014 09:15:11 +0100
Subject: iwlegacy: properly enable power saving

Even if we mark PS on, device still worked in normal mode. Patch
corrects that and now we send proper powertable command to device,
which put it in sleep mode when PS is on.

Reported-and-tested-by: Tino Keitel <tino.keitel@tikei.de>
Tested-by: Pedro Francisco <pedrogfrancisco@gmail.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlegacy/commands.h |  3 +-
 drivers/net/wireless/iwlegacy/common.c   | 83 ++++++++++++++++++++++++++------
 drivers/net/wireless/iwlegacy/common.h   |  1 +
 3 files changed, 72 insertions(+), 15 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlegacy/commands.h b/drivers/net/wireless/iwlegacy/commands.h
index 048421511988..dd744135c956 100644
--- a/drivers/net/wireless/iwlegacy/commands.h
+++ b/drivers/net/wireless/iwlegacy/commands.h
@@ -2270,7 +2270,8 @@ struct il_spectrum_notification {
  */
 #define IL_POWER_VEC_SIZE 5
 
-#define IL_POWER_DRIVER_ALLOW_SLEEP_MSK	cpu_to_le16(BIT(0))
+#define IL_POWER_DRIVER_ALLOW_SLEEP_MSK		cpu_to_le16(BIT(0))
+#define IL_POWER_SLEEP_OVER_DTIM_MSK		cpu_to_le16(BIT(2))
 #define IL_POWER_PCI_PM_MSK			cpu_to_le16(BIT(3))
 
 struct il3945_powertable_cmd {
diff --git a/drivers/net/wireless/iwlegacy/common.c b/drivers/net/wireless/iwlegacy/common.c
index 02e8233ccf29..4f42174d9994 100644
--- a/drivers/net/wireless/iwlegacy/common.c
+++ b/drivers/net/wireless/iwlegacy/common.c
@@ -1078,29 +1078,82 @@ EXPORT_SYMBOL(il_get_channel_info);
  * Setting power level allows the card to go to sleep when not busy.
  *
  * We calculate a sleep command based on the required latency, which
- * we get from mac80211. In order to handle thermal throttling, we can
- * also use pre-defined power levels.
+ * we get from mac80211.
  */
 
-/*
- * This defines the old power levels. They are still used by default
- * (level 1) and for thermal throttle (levels 3 through 5)
- */
-
-struct il_power_vec_entry {
-	struct il_powertable_cmd cmd;
-	u8 no_dtim;		/* number of skip dtim */
-};
+#define SLP_VEC(X0, X1, X2, X3, X4) { \
+		cpu_to_le32(X0), \
+		cpu_to_le32(X1), \
+		cpu_to_le32(X2), \
+		cpu_to_le32(X3), \
+		cpu_to_le32(X4)  \
+}
 
 static void
-il_power_sleep_cam_cmd(struct il_priv *il, struct il_powertable_cmd *cmd)
+il_build_powertable_cmd(struct il_priv *il, struct il_powertable_cmd *cmd)
 {
+	const __le32 interval[3][IL_POWER_VEC_SIZE] = {
+		SLP_VEC(2, 2, 4, 6, 0xFF),
+		SLP_VEC(2, 4, 7, 10, 10),
+		SLP_VEC(4, 7, 10, 10, 0xFF)
+	};
+	int i, dtim_period, no_dtim;
+	u32 max_sleep;
+	bool skip;
+
 	memset(cmd, 0, sizeof(*cmd));
 
 	if (il->power_data.pci_pm)
 		cmd->flags |= IL_POWER_PCI_PM_MSK;
 
-	D_POWER("Sleep command for CAM\n");
+	/* if no Power Save, we are done */
+	if (il->power_data.ps_disabled)
+		return;
+
+	cmd->flags = IL_POWER_DRIVER_ALLOW_SLEEP_MSK;
+	cmd->keep_alive_seconds = 0;
+	cmd->debug_flags = 0;
+	cmd->rx_data_timeout = cpu_to_le32(25 * 1024);
+	cmd->tx_data_timeout = cpu_to_le32(25 * 1024);
+	cmd->keep_alive_beacons = 0;
+
+	dtim_period = il->vif ? il->vif->bss_conf.dtim_period : 0;
+
+	if (dtim_period <= 2) {
+		memcpy(cmd->sleep_interval, interval[0], sizeof(interval[0]));
+		no_dtim = 2;
+	} else if (dtim_period <= 10) {
+		memcpy(cmd->sleep_interval, interval[1], sizeof(interval[1]));
+		no_dtim = 2;
+	} else {
+		memcpy(cmd->sleep_interval, interval[2], sizeof(interval[2]));
+		no_dtim = 0;
+	}
+
+	if (dtim_period == 0) {
+		dtim_period = 1;
+		skip = false;
+	} else {
+		skip = !!no_dtim;
+	}
+
+	if (skip) {
+		__le32 tmp = cmd->sleep_interval[IL_POWER_VEC_SIZE - 1];
+
+		max_sleep = le32_to_cpu(tmp);
+		if (max_sleep == 0xFF)
+			max_sleep = dtim_period * (skip + 1);
+		else if (max_sleep >  dtim_period)
+			max_sleep = (max_sleep / dtim_period) * dtim_period;
+		cmd->flags |= IL_POWER_SLEEP_OVER_DTIM_MSK;
+	} else {
+		max_sleep = dtim_period;
+		cmd->flags &= ~IL_POWER_SLEEP_OVER_DTIM_MSK;
+	}
+
+	for (i = 0; i < IL_POWER_VEC_SIZE; i++)
+		if (le32_to_cpu(cmd->sleep_interval[i]) > max_sleep)
+			cmd->sleep_interval[i] = cpu_to_le32(max_sleep);
 }
 
 static int
@@ -1173,7 +1226,8 @@ il_power_update_mode(struct il_priv *il, bool force)
 {
 	struct il_powertable_cmd cmd;
 
-	il_power_sleep_cam_cmd(il, &cmd);
+	il_build_powertable_cmd(il, &cmd);
+
 	return il_power_set_mode(il, &cmd, force);
 }
 EXPORT_SYMBOL(il_power_update_mode);
@@ -5081,6 +5135,7 @@ set_ch_out:
 	}
 
 	if (changed & (IEEE80211_CONF_CHANGE_PS | IEEE80211_CONF_CHANGE_IDLE)) {
+		il->power_data.ps_disabled = !(conf->flags & IEEE80211_CONF_PS);
 		ret = il_power_update_mode(il, false);
 		if (ret)
 			D_MAC80211("Error setting sleep level\n");
diff --git a/drivers/net/wireless/iwlegacy/common.h b/drivers/net/wireless/iwlegacy/common.h
index 21964d2cad83..13145ad2c0db 100644
--- a/drivers/net/wireless/iwlegacy/common.h
+++ b/drivers/net/wireless/iwlegacy/common.h
@@ -1123,6 +1123,7 @@ struct il_power_mgr {
 	struct il_powertable_cmd sleep_cmd_next;
 	int debug_sleep_level_override;
 	bool pci_pm;
+	bool ps_disabled;
 };
 
 struct il_priv {
-- 
cgit v1.2.2


From 434bb46c36c545b4a81c02c73e24560c303c3388 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Thu, 20 Feb 2014 15:44:23 -0500
Subject: wireless/rt2x00: don't use PREPARE_WORK in rt2800usb.c

PREPARE_[DELAYED_]WORK() are being phased out.  They have few users
and a nasty surprise in terms of reentrancy guarantee as workqueue
considers work items to be different if they don't have the same work
function.

Update rt2800usb.c to use INIT_WORK() instead of PREPARE_WORK().  As
the work item isn't in active use during rt2800usb_probe_hw(), this
doesn't cause any behavior difference.

It would probably be best to route this with other related updates
through the workqueue tree.

Only compile tested.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ivo van Doorn <IvDoorn@gmail.com>
Cc: Gertjan van Wingerde <gwingerde@gmail.com>
Cc: Helmut Schaa <helmut.schaa@googlemail.com>
Cc: linux-wireless@vger.kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2800usb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 14a90ddf585c..a49c3d73ea2c 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -764,7 +764,7 @@ static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Overwrite TX done handler
 	 */
-	PREPARE_WORK(&rt2x00dev->txdone_work, rt2800usb_work_txdone);
+	INIT_WORK(&rt2x00dev->txdone_work, rt2800usb_work_txdone);
 
 	return 0;
 }
-- 
cgit v1.2.2


From 443626e5a956d0c740034e53cf4164c2c1069cd4 Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Fri, 21 Feb 2014 11:45:36 +0100
Subject: ath9k: list more reset causes in debugfs

Number of MAC hangs and stuck beacons were missing

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/debug.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c
index ab7264c1d8f7..f42ed3b17330 100644
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
@@ -865,6 +865,12 @@ static ssize_t read_file_reset(struct file *file, char __user *user_buf,
 	len += scnprintf(buf + len, sizeof(buf) - len,
 			 "%17s: %2d\n", "PLL RX Hang",
 			 sc->debug.stats.reset[RESET_TYPE_PLL_HANG]);
+	len += scnprintf(buf + len, sizeof(buf) - len,
+			 "%17s: %2d\n", "MAC Hang",
+			 sc->debug.stats.reset[RESET_TYPE_MAC_HANG]);
+	len += scnprintf(buf + len, sizeof(buf) - len,
+			 "%17s: %2d\n", "Stuck Beacon",
+			 sc->debug.stats.reset[RESET_TYPE_BEACON_STUCK]);
 	len += scnprintf(buf + len, sizeof(buf) - len,
 			 "%17s: %2d\n", "MCI Reset",
 			 sc->debug.stats.reset[RESET_TYPE_MCI]);
-- 
cgit v1.2.2


From 2120ac96744f9517f19241b7c0adb796eeb53eb6 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Fri, 21 Feb 2014 14:46:43 -0800
Subject: ath9k: Use static const

Trivially reduces text size too.

$ size drivers/net/wireless/ath/ath9k/debug.o*
   text	   data	    bss	    dec	    hex	filename
  34436	   2528	   5128	  42092	   a46c	drivers/net/wireless/ath/ath9k/debug.o.new
  34464	   2528	   5128	  42120	   a488	drivers/net/wireless/ath/ath9k/debug.o.old

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/debug.c | 20 ++++++++++++--------
 1 file changed, 12 insertions(+), 8 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c
index f42ed3b17330..f8924efdad55 100644
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
@@ -135,7 +135,8 @@ static ssize_t read_file_ani(struct file *file, char __user *user_buf,
 	struct ath_softc *sc = file->private_data;
 	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	struct ath_hw *ah = sc->sc_ah;
-	unsigned int len = 0, size = 1024;
+	unsigned int len = 0;
+	const unsigned int size = 1024;
 	ssize_t retval = 0;
 	char *buf;
 
@@ -307,13 +308,13 @@ static ssize_t read_file_antenna_diversity(struct file *file,
 	struct ath_antenna_stats *as_main = &sc->debug.stats.ant_stats[ANT_MAIN];
 	struct ath_antenna_stats *as_alt = &sc->debug.stats.ant_stats[ANT_ALT];
 	struct ath_hw_antcomb_conf div_ant_conf;
-	unsigned int len = 0, size = 1024;
+	unsigned int len = 0;
+	const unsigned int size = 1024;
 	ssize_t retval = 0;
 	char *buf;
-	char *lna_conf_str[4] = {"LNA1_MINUS_LNA2",
-				 "LNA2",
-				 "LNA1",
-				 "LNA1_PLUS_LNA2"};
+	static const char *lna_conf_str[4] = {
+		"LNA1_MINUS_LNA2", "LNA2", "LNA1", "LNA1_PLUS_LNA2"
+	};
 
 	buf = kzalloc(size, GFP_KERNEL);
 	if (buf == NULL)
@@ -716,10 +717,13 @@ static ssize_t read_file_queues(struct file *file, char __user *user_buf,
 	struct ath_softc *sc = file->private_data;
 	struct ath_txq *txq;
 	char *buf;
-	unsigned int len = 0, size = 1024;
+	unsigned int len = 0;
+	const unsigned int size = 1024;
 	ssize_t retval = 0;
 	int i;
-	char *qname[4] = {"VO", "VI", "BE", "BK"};
+	static const char *qname[4] = {
+		"VO", "VI", "BE", "BK"
+	};
 
 	buf = kzalloc(size, GFP_KERNEL);
 	if (buf == NULL)
-- 
cgit v1.2.2


From cd6cfd7311a385144a2f9c74f692ae2df3ae033f Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Sat, 22 Feb 2014 14:52:48 +0100
Subject: ath9k: do not set half/quarter channel flags in AR_PHY_MODE

5/10 MHz channel bandwidth is configured via the PLL clock, instead of
the AR_PHY_MODE register. Using that register is AR93xx specific, and
makes the mode incompatible with earlier chipsets.

In some early versions, these flags were apparently applied at the wrong
point in time and thus did not cause connectivity issues, however now
they are causing problems, as pointed out in this OpenWrt ticket:

https://dev.openwrt.org/ticket/14916

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ar9003_phy.c | 4 ----
 1 file changed, 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index 09facba1dc6d..8927fc34d84c 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -868,10 +868,6 @@ static void ar9003_hw_set_rfmode(struct ath_hw *ah,
 
 	if (IS_CHAN_A_FAST_CLOCK(ah, chan))
 		rfMode |= (AR_PHY_MODE_DYNAMIC | AR_PHY_MODE_DYN_CCK_DISABLE);
-	if (IS_CHAN_QUARTER_RATE(chan))
-		rfMode |= AR_PHY_MODE_QUARTER;
-	if (IS_CHAN_HALF_RATE(chan))
-		rfMode |= AR_PHY_MODE_HALF;
 
 	if (rfMode & (AR_PHY_MODE_QUARTER | AR_PHY_MODE_HALF))
 		REG_RMW_FIELD(ah, AR_PHY_FRAME_CTL,
-- 
cgit v1.2.2


From affad456f2a8fa5351c711dd91763387976a6400 Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Sat, 22 Feb 2014 14:52:49 +0100
Subject: ath9k: make some hardware reset log messages debug-only

On some chips, baseband watchdog hangs are more common than others, and
the driver has support for handling them.
Interrupts even after a watchdog hang are also quite common, so there's
not much point in spamming the user's logfiles.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/main.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index afce549a097b..14a7524b4b50 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -451,7 +451,7 @@ void ath9k_tasklet(unsigned long data)
 		 * interrupts are enabled in the reset routine.
 		 */
 		atomic_inc(&ah->intr_ref_cnt);
-		ath_dbg(common, ANY, "FATAL: Skipping interrupts\n");
+		ath_dbg(common, RESET, "FATAL: Skipping interrupts\n");
 		goto out;
 	}
 
@@ -471,7 +471,7 @@ void ath9k_tasklet(unsigned long data)
 			 * interrupts are enabled in the reset routine.
 			 */
 			atomic_inc(&ah->intr_ref_cnt);
-			ath_dbg(common, ANY,
+			ath_dbg(common, RESET,
 				"BB_WATCHDOG: Skipping interrupts\n");
 			goto out;
 		}
@@ -484,7 +484,7 @@ void ath9k_tasklet(unsigned long data)
 			type = RESET_TYPE_TX_GTT;
 			ath9k_queue_reset(sc, type);
 			atomic_inc(&ah->intr_ref_cnt);
-			ath_dbg(common, ANY,
+			ath_dbg(common, RESET,
 				"GTT: Skipping interrupts\n");
 			goto out;
 		}
-- 
cgit v1.2.2


From ef1b4141d0430583743a6045901e4d1a73557a33 Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Sat, 22 Feb 2014 14:55:57 +0100
Subject: ath5k: set SURVEY_INFO_IN_USE on get_survey

Only one channel is returned - the one currently being used.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath5k/mac80211-ops.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath5k/mac80211-ops.c b/drivers/net/wireless/ath/ath5k/mac80211-ops.c
index 4ee01f654235..afb23b3cc7be 100644
--- a/drivers/net/wireless/ath/ath5k/mac80211-ops.c
+++ b/drivers/net/wireless/ath/ath5k/mac80211-ops.c
@@ -681,6 +681,7 @@ ath5k_get_survey(struct ieee80211_hw *hw, int idx, struct survey_info *survey)
 	survey->channel = conf->chandef.chan;
 	survey->noise = ah->ah_noise_floor;
 	survey->filled = SURVEY_INFO_NOISE_DBM |
+			SURVEY_INFO_IN_USE |
 			SURVEY_INFO_CHANNEL_TIME |
 			SURVEY_INFO_CHANNEL_TIME_BUSY |
 			SURVEY_INFO_CHANNEL_TIME_RX |
-- 
cgit v1.2.2


From 827418081ab177b82ff3032277fca32c3ecc5dc3 Mon Sep 17 00:00:00 2001
From: dingtianhong <dingtianhong@huawei.com>
Date: Fri, 21 Feb 2014 16:08:52 +0800
Subject: bonding: netpoll: remove unwanted slave_dev_support_netpoll()

The __netpoll_setup() will check the slave's flag and ndo_poll_controller just
like the slave_dev_support_netpoll() does, and slave_dev_support_netpoll() was
not used by any place, so remove it.

Cc: Jay Vosburgh <fubar@us.ibm.com>
Cc: Veaceslav Falico <vfalico@redhat.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_main.c | 8 --------
 1 file changed, 8 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index bd70bbc7992c..942eeb1c7794 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -942,14 +942,6 @@ static inline void slave_disable_netpoll(struct slave *slave)
 	slave->np = NULL;
 	__netpoll_free_async(np);
 }
-static inline bool slave_dev_support_netpoll(struct net_device *slave_dev)
-{
-	if (slave_dev->priv_flags & IFF_DISABLE_NETPOLL)
-		return false;
-	if (!slave_dev->netdev_ops->ndo_poll_controller)
-		return false;
-	return true;
-}
 
 static void bond_poll_controller(struct net_device *bond_dev)
 {
-- 
cgit v1.2.2


From 4335d60e5e271497116fd77ed68dacca7cfb1548 Mon Sep 17 00:00:00 2001
From: dingtianhong <dingtianhong@huawei.com>
Date: Fri, 21 Feb 2014 16:08:53 +0800
Subject: bonding: use rcu_dereference() to access curr_active_slave

The bond_info_show_master already in RCU read-side critical section,
and the we access curr_active_slave without the curr_slave_lock, we
could not sure whether the curr_active_slave will be changed during
the processing, so use RCU to protected the pointer.

Cc: Jay Vosburgh <fubar@us.ibm.com>
Cc: Veaceslav Falico <vfalico@redhat.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_procfs.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_procfs.c b/drivers/net/bonding/bond_procfs.c
index 434df7360999..588cf39d832c 100644
--- a/drivers/net/bonding/bond_procfs.c
+++ b/drivers/net/bonding/bond_procfs.c
@@ -69,9 +69,7 @@ static void bond_info_show_master(struct seq_file *seq)
 	struct slave *curr;
 	int i;
 
-	read_lock(&bond->curr_slave_lock);
-	curr = bond->curr_active_slave;
-	read_unlock(&bond->curr_slave_lock);
+	curr = rcu_dereference(bond->curr_active_slave);
 
 	seq_printf(seq, "Bonding Mode: %s",
 		   bond_mode_name(bond->params.mode));
-- 
cgit v1.2.2


From 7a4ddcd92ea72fdc54ebf671f3d3fcc8ba3a1ea8 Mon Sep 17 00:00:00 2001
From: dingtianhong <dingtianhong@huawei.com>
Date: Fri, 21 Feb 2014 16:08:54 +0800
Subject: bonding: remove no longer needed lock for bond_xxx_info_query()

The bond_xxx_info_query() was already in RTNL, so no need to use
bond lock to protect the bond slave list, so remove it.

Cc: Jay Vosburgh <fubar@us.ibm.com>
Cc: Veaceslav Falico <vfalico@redhat.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_main.c | 4 ----
 1 file changed, 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 942eeb1c7794..12948b33451a 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1816,9 +1816,7 @@ static int bond_info_query(struct net_device *bond_dev, struct ifbond *info)
 	info->bond_mode = bond->params.mode;
 	info->miimon = bond->params.miimon;
 
-	read_lock(&bond->lock);
 	info->num_slaves = bond->slave_cnt;
-	read_unlock(&bond->lock);
 
 	return 0;
 }
@@ -1830,7 +1828,6 @@ static int bond_slave_info_query(struct net_device *bond_dev, struct ifslave *in
 	int i = 0, res = -ENODEV;
 	struct slave *slave;
 
-	read_lock(&bond->lock);
 	bond_for_each_slave(bond, slave, iter) {
 		if (i++ == (int)info->slave_id) {
 			res = 0;
@@ -1841,7 +1838,6 @@ static int bond_slave_info_query(struct net_device *bond_dev, struct ifslave *in
 			break;
 		}
 	}
-	read_unlock(&bond->lock);
 
 	return res;
 }
-- 
cgit v1.2.2


From 02512482321c531df4abf73943529f8b44d869e2 Mon Sep 17 00:00:00 2001
From: Ido Shamay <idos@mellanox.com>
Date: Fri, 21 Feb 2014 12:39:17 +0200
Subject: net/mlx4: Set number of RX rings in a utility function

mlx4_en_add() is too long.
Moving set number of RX rings to a utiltity function to improve
readability and modulization of the code.

Signed-off-by: Ido Shamay <idos@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/mellanox/mlx4/en_main.c | 15 ++-------------
 drivers/net/ethernet/mellanox/mlx4/en_rx.c   | 22 ++++++++++++++++++++++
 drivers/net/ethernet/mellanox/mlx4/mlx4_en.h |  2 +-
 3 files changed, 25 insertions(+), 14 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/mellanox/mlx4/en_main.c b/drivers/net/ethernet/mellanox/mlx4/en_main.c
index d357bf5a4686..fa2f6e76f69b 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_main.c
@@ -274,19 +274,8 @@ static void *mlx4_en_add(struct mlx4_dev *dev)
 	if (mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_TS)
 		mlx4_en_init_timestamp(mdev);
 
-	mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH) {
-		if (!dev->caps.comp_pool) {
-			mdev->profile.prof[i].rx_ring_num =
-				rounddown_pow_of_two(max_t(int, MIN_RX_RINGS,
-							   min_t(int,
-								 dev->caps.num_comp_vectors,
-								 DEF_RX_RINGS)));
-		} else {
-			mdev->profile.prof[i].rx_ring_num = rounddown_pow_of_two(
-				min_t(int, dev->caps.comp_pool/
-				      dev->caps.num_ports - 1 , MAX_MSIX_P_PORT - 1));
-		}
-	}
+	/* Set default number of RX rings*/
+	mlx4_en_set_num_rx_rings(mdev);
 
 	/* Create our own workqueue for reset/multicast tasks
 	 * Note: we cannot use the shared workqueue because of deadlocks caused
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_rx.c b/drivers/net/ethernet/mellanox/mlx4/en_rx.c
index 890922c1c8ee..85434d73c9bc 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_rx.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_rx.c
@@ -318,6 +318,28 @@ static void mlx4_en_free_rx_buf(struct mlx4_en_priv *priv,
 	}
 }
 
+void mlx4_en_set_num_rx_rings(struct mlx4_en_dev *mdev)
+{
+	int i;
+	int num_of_eqs;
+	struct mlx4_dev *dev = mdev->dev;
+
+	mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH) {
+		if (!dev->caps.comp_pool)
+			num_of_eqs = max_t(int, MIN_RX_RINGS,
+					   min_t(int,
+						 dev->caps.num_comp_vectors,
+						 DEF_RX_RINGS));
+		else
+			num_of_eqs = min_t(int, MAX_MSIX_P_PORT,
+					   dev->caps.comp_pool/
+					   dev->caps.num_ports) - 1;
+
+		mdev->profile.prof[i].rx_ring_num =
+			rounddown_pow_of_two(num_of_eqs);
+	}
+}
+
 int mlx4_en_create_rx_ring(struct mlx4_en_priv *priv,
 			   struct mlx4_en_rx_ring **pring,
 			   u32 size, u16 stride, int node)
diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
index 9ca223bc90fc..3c25c7bf3dba 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
@@ -737,7 +737,7 @@ int mlx4_en_activate_tx_ring(struct mlx4_en_priv *priv,
 			     int cq, int user_prio);
 void mlx4_en_deactivate_tx_ring(struct mlx4_en_priv *priv,
 				struct mlx4_en_tx_ring *ring);
-
+void mlx4_en_set_num_rx_rings(struct mlx4_en_dev *mdev);
 int mlx4_en_create_rx_ring(struct mlx4_en_priv *priv,
 			   struct mlx4_en_rx_ring **pring,
 			   u32 size, u16 stride, int node);
-- 
cgit v1.2.2


From bb2146bc883e86b835e30644757a6d4a649a7ce8 Mon Sep 17 00:00:00 2001
From: Ido Shamay <idos@mellanox.com>
Date: Fri, 21 Feb 2014 12:39:18 +0200
Subject: net/mlx4: Fix limiting number of IRQ's instead of RSS queues

This fix a performance bug introduced by commit 90b1ebe "mlx4: set
maximal number of default RSS queues", which limits the numbers of IRQs
opened by core module.
The limit should be on the number of queues in the indirection table -
rx_rings, and not on the number of IRQ's. Also, limiting on mlx4_core
initialization instead of in mlx4_en, prevented using "ethtool -L" to
utilize all the CPU's, when performance mode is prefered, since limiting
this number to 8 reduces overall packet rate by 15%-50% in multiple TCP
streams applications.

For example, after running ethtool -L <ethx> rx 16

          Packet rate
Before the fix  897799
After the fix   1142070

Results were obtained using netperf:

S=200 ; ( for i in $(seq 1 $S) ; do ( \
  netperf -H 11.7.13.55 -t TCP_RR -l 30 &) ; \
  wait ; done | grep "1        1" | awk '{SUM+=$6} END {print SUM}' )

CC: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ido Shamay <idos@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/mellanox/mlx4/en_rx.c | 5 ++++-
 drivers/net/ethernet/mellanox/mlx4/main.c  | 3 +--
 2 files changed, 5 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/mellanox/mlx4/en_rx.c b/drivers/net/ethernet/mellanox/mlx4/en_rx.c
index 85434d73c9bc..8afb72ec957d 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_rx.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_rx.c
@@ -322,6 +322,7 @@ void mlx4_en_set_num_rx_rings(struct mlx4_en_dev *mdev)
 {
 	int i;
 	int num_of_eqs;
+	int num_rx_rings;
 	struct mlx4_dev *dev = mdev->dev;
 
 	mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH) {
@@ -335,8 +336,10 @@ void mlx4_en_set_num_rx_rings(struct mlx4_en_dev *mdev)
 					   dev->caps.comp_pool/
 					   dev->caps.num_ports) - 1;
 
+		num_rx_rings = min_t(int, num_of_eqs,
+				     netif_get_num_default_rss_queues());
 		mdev->profile.prof[i].rx_ring_num =
-			rounddown_pow_of_two(num_of_eqs);
+			rounddown_pow_of_two(num_rx_rings);
 	}
 }
 
diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c
index 218b759c506e..979ea4364efb 100644
--- a/drivers/net/ethernet/mellanox/mlx4/main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/main.c
@@ -41,7 +41,6 @@
 #include <linux/slab.h>
 #include <linux/io-mapping.h>
 #include <linux/delay.h>
-#include <linux/netdevice.h>
 #include <linux/kmod.h>
 
 #include <linux/mlx4/device.h>
@@ -1974,7 +1973,7 @@ static void mlx4_enable_msi_x(struct mlx4_dev *dev)
 	struct mlx4_priv *priv = mlx4_priv(dev);
 	struct msix_entry *entries;
 	int nreq = min_t(int, dev->caps.num_ports *
-			 min_t(int, netif_get_num_default_rss_queues() + 1,
+			 min_t(int, num_online_cpus() + 1,
 			       MAX_MSIX_P_PORT) + MSIX_LEGACY_SZ, MAX_MSIX);
 	int i;
 
-- 
cgit v1.2.2


From 225837a076b284ac408a3b0104584ae0ad117a0c Mon Sep 17 00:00:00 2001
From: Shahed Shaikh <shahed.shaikh@qlogic.com>
Date: Fri, 21 Feb 2014 13:20:10 -0500
Subject: qlcnic: Re-factor firmware minidump template header handling

Treat firmware minidump template headers for 82xx and 83xx/84xx adapters separately,
as it may change for 82xx and 83xx/84xx adapter type independently.

Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/qlogic/qlcnic/qlcnic.h        |  73 ++++++-
 .../net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c    |   7 +-
 .../net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h    |   8 +
 .../net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c    |  17 +-
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h     |   8 +
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c   |   7 +-
 .../net/ethernet/qlogic/qlcnic/qlcnic_minidump.c   | 233 ++++++++++++++++-----
 7 files changed, 287 insertions(+), 66 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
index f19f81cde134..6ad1bcebc0fe 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
@@ -394,7 +394,7 @@ struct qlcnic_nic_intr_coalesce {
 	u32	timer_out;
 };
 
-struct qlcnic_dump_template_hdr {
+struct qlcnic_83xx_dump_template_hdr {
 	u32	type;
 	u32	offset;
 	u32	size;
@@ -411,15 +411,42 @@ struct qlcnic_dump_template_hdr {
 	u32	rsvd[0];
 };
 
+struct qlcnic_82xx_dump_template_hdr {
+	u32	type;
+	u32	offset;
+	u32	size;
+	u32	cap_mask;
+	u32	num_entries;
+	u32	version;
+	u32	timestamp;
+	u32	checksum;
+	u32	drv_cap_mask;
+	u32	sys_info[3];
+	u32	saved_state[16];
+	u32	cap_sizes[8];
+	u32	rsvd[7];
+	u32	capabilities;
+	u32	rsvd1[0];
+};
+
 struct qlcnic_fw_dump {
 	u8	clr;	/* flag to indicate if dump is cleared */
 	bool	enable; /* enable/disable dump */
 	u32	size;	/* total size of the dump */
+	u32	cap_mask; /* Current capture mask */
 	void	*data;	/* dump data area */
-	struct	qlcnic_dump_template_hdr *tmpl_hdr;
+	void	*tmpl_hdr;
 	dma_addr_t phys_addr;
 	void	*dma_buffer;
 	bool	use_pex_dma;
+	/* Read only elements which are common between 82xx and 83xx
+	 * template header. Update these values immediately after we read
+	 * template header from Firmware
+	 */
+	u32	tmpl_hdr_size;
+	u32	version;
+	u32	num_entries;
+	u32	offset;
 };
 
 /*
@@ -1769,6 +1796,12 @@ struct qlcnic_hardware_ops {
 				struct qlcnic_host_tx_ring *);
 	void (*disable_tx_intr) (struct qlcnic_adapter *,
 				 struct qlcnic_host_tx_ring *);
+	u32 (*get_saved_state)(void *, u32);
+	void (*set_saved_state)(void *, u32, u32);
+	void (*cache_tmpl_hdr_values)(struct qlcnic_fw_dump *);
+	u32 (*get_cap_size)(void *, int);
+	void (*set_sys_info)(void *, int, u32);
+	void (*store_cap_mask)(void *, u32);
 };
 
 extern struct qlcnic_nic_template qlcnic_vf_ops;
@@ -2007,6 +2040,42 @@ static inline void qlcnic_read_phys_port_id(struct qlcnic_adapter *adapter)
 		adapter->ahw->hw_ops->read_phys_port_id(adapter);
 }
 
+static inline u32 qlcnic_get_saved_state(struct qlcnic_adapter *adapter,
+					 void *t_hdr, u32 index)
+{
+	return adapter->ahw->hw_ops->get_saved_state(t_hdr, index);
+}
+
+static inline void qlcnic_set_saved_state(struct qlcnic_adapter *adapter,
+					  void *t_hdr, u32 index, u32 value)
+{
+	adapter->ahw->hw_ops->set_saved_state(t_hdr, index, value);
+}
+
+static inline void qlcnic_cache_tmpl_hdr_values(struct qlcnic_adapter *adapter,
+						struct qlcnic_fw_dump *fw_dump)
+{
+	adapter->ahw->hw_ops->cache_tmpl_hdr_values(fw_dump);
+}
+
+static inline u32 qlcnic_get_cap_size(struct qlcnic_adapter *adapter,
+				      void *tmpl_hdr, int index)
+{
+	return adapter->ahw->hw_ops->get_cap_size(tmpl_hdr, index);
+}
+
+static inline void qlcnic_set_sys_info(struct qlcnic_adapter *adapter,
+				       void *tmpl_hdr, int idx, u32 value)
+{
+	adapter->ahw->hw_ops->set_sys_info(tmpl_hdr, idx, value);
+}
+
+static inline void qlcnic_store_cap_mask(struct qlcnic_adapter *adapter,
+					 void *tmpl_hdr, u32 mask)
+{
+	adapter->ahw->hw_ops->store_cap_mask(tmpl_hdr, mask);
+}
+
 static inline void qlcnic_dev_request_reset(struct qlcnic_adapter *adapter,
 					    u32 key)
 {
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
index 4146664d4d6a..0f39778e0e5b 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
@@ -203,7 +203,12 @@ static struct qlcnic_hardware_ops qlcnic_83xx_hw_ops = {
 	.disable_sds_intr		= qlcnic_83xx_disable_sds_intr,
 	.enable_tx_intr			= qlcnic_83xx_enable_tx_intr,
 	.disable_tx_intr		= qlcnic_83xx_disable_tx_intr,
-
+	.get_saved_state		= qlcnic_83xx_get_saved_state,
+	.set_saved_state		= qlcnic_83xx_set_saved_state,
+	.cache_tmpl_hdr_values		= qlcnic_83xx_cache_tmpl_hdr_values,
+	.get_cap_size			= qlcnic_83xx_get_cap_size,
+	.set_sys_info			= qlcnic_83xx_set_sys_info,
+	.store_cap_mask			= qlcnic_83xx_store_cap_mask,
 };
 
 static struct qlcnic_nic_template qlcnic_83xx_ops = {
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h
index f92485ca21d1..81c1889f6f3e 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h
@@ -308,6 +308,8 @@ struct qlc_83xx_reset {
 #define QLC_83XX_IDC_FLASH_PARAM_ADDR			0x3e8020
 
 struct qlcnic_adapter;
+struct qlcnic_fw_dump;
+
 struct qlc_83xx_idc {
 	int (*state_entry) (struct qlcnic_adapter *);
 	u64		sec_counter;
@@ -650,4 +652,10 @@ int qlcnic_83xx_check_vnic_state(struct qlcnic_adapter *);
 void qlcnic_83xx_aer_stop_poll_work(struct qlcnic_adapter *);
 int qlcnic_83xx_aer_reset(struct qlcnic_adapter *);
 void qlcnic_83xx_aer_start_poll_work(struct qlcnic_adapter *);
+u32 qlcnic_83xx_get_saved_state(void *, u32);
+void qlcnic_83xx_set_saved_state(void *, u32, u32);
+void qlcnic_83xx_cache_tmpl_hdr_values(struct qlcnic_fw_dump *);
+u32 qlcnic_83xx_get_cap_size(void *, int);
+void qlcnic_83xx_set_sys_info(void *, int, u32);
+void qlcnic_83xx_store_cap_mask(void *, u32);
 #endif
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
index acee1a5d80c6..1960609481ce 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
@@ -1639,14 +1639,14 @@ qlcnic_get_dump_flag(struct net_device *netdev, struct ethtool_dump *dump)
 	}
 
 	if (fw_dump->clr)
-		dump->len = fw_dump->tmpl_hdr->size + fw_dump->size;
+		dump->len = fw_dump->tmpl_hdr_size + fw_dump->size;
 	else
 		dump->len = 0;
 
 	if (!qlcnic_check_fw_dump_state(adapter))
 		dump->flag = ETH_FW_DUMP_DISABLE;
 	else
-		dump->flag = fw_dump->tmpl_hdr->drv_cap_mask;
+		dump->flag = fw_dump->cap_mask;
 
 	dump->version = adapter->fw_version;
 	return 0;
@@ -1671,9 +1671,10 @@ qlcnic_get_dump_data(struct net_device *netdev, struct ethtool_dump *dump,
 		netdev_info(netdev, "Dump not available\n");
 		return -EINVAL;
 	}
+
 	/* Copy template header first */
-	copy_sz = fw_dump->tmpl_hdr->size;
-	hdr_ptr = (u32 *) fw_dump->tmpl_hdr;
+	copy_sz = fw_dump->tmpl_hdr_size;
+	hdr_ptr = (u32 *)fw_dump->tmpl_hdr;
 	data = buffer;
 	for (i = 0; i < copy_sz/sizeof(u32); i++)
 		*data++ = cpu_to_le32(*hdr_ptr++);
@@ -1681,7 +1682,7 @@ qlcnic_get_dump_data(struct net_device *netdev, struct ethtool_dump *dump,
 	/* Copy captured dump data */
 	memcpy(buffer + copy_sz, fw_dump->data, fw_dump->size);
 	dump->len = copy_sz + fw_dump->size;
-	dump->flag = fw_dump->tmpl_hdr->drv_cap_mask;
+	dump->flag = fw_dump->cap_mask;
 
 	/* Free dump area once data has been captured */
 	vfree(fw_dump->data);
@@ -1703,7 +1704,11 @@ static int qlcnic_set_dump_mask(struct qlcnic_adapter *adapter, u32 mask)
 		return -EOPNOTSUPP;
 	}
 
-	fw_dump->tmpl_hdr->drv_cap_mask = mask;
+	fw_dump->cap_mask = mask;
+
+	/* Store new capture mask in template header as well*/
+	qlcnic_store_cap_mask(adapter, fw_dump->tmpl_hdr, mask);
+
 	netdev_info(netdev, "Driver mask changed to: 0x%x\n", mask);
 	return 0;
 }
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h
index 63d75617d445..576b301b11ef 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h
@@ -161,6 +161,7 @@ struct qlcnic_host_sds_ring;
 struct qlcnic_host_tx_ring;
 struct qlcnic_hardware_context;
 struct qlcnic_adapter;
+struct qlcnic_fw_dump;
 
 int qlcnic_82xx_hw_read_wx_2M(struct qlcnic_adapter *adapter, ulong, int *);
 int qlcnic_82xx_hw_write_wx_2M(struct qlcnic_adapter *, ulong, u32);
@@ -213,4 +214,11 @@ int qlcnic_82xx_shutdown(struct pci_dev *);
 int qlcnic_82xx_resume(struct qlcnic_adapter *);
 void qlcnic_clr_all_drv_state(struct qlcnic_adapter *adapter, u8 failed);
 void qlcnic_fw_poll_work(struct work_struct *work);
+
+u32 qlcnic_82xx_get_saved_state(void *, u32);
+void qlcnic_82xx_set_saved_state(void *, u32, u32);
+void qlcnic_82xx_cache_tmpl_hdr_values(struct qlcnic_fw_dump *);
+u32 qlcnic_82xx_get_cap_size(void *, int);
+void qlcnic_82xx_set_sys_info(void *, int, u32);
+void qlcnic_82xx_store_cap_mask(void *, u32);
 #endif				/* __QLCNIC_HW_H_ */
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
index e07fd948d98b..964ba457a7c6 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
@@ -90,7 +90,6 @@ static void qlcnic_82xx_io_resume(struct pci_dev *);
 static void qlcnic_82xx_set_mac_filter_count(struct qlcnic_adapter *);
 static pci_ers_result_t qlcnic_82xx_io_error_detected(struct pci_dev *,
 						      pci_channel_state_t);
-
 static u32 qlcnic_vlan_tx_check(struct qlcnic_adapter *adapter)
 {
 	struct qlcnic_hardware_context *ahw = adapter->ahw;
@@ -561,6 +560,12 @@ static struct qlcnic_hardware_ops qlcnic_hw_ops = {
 	.disable_sds_intr		= qlcnic_82xx_disable_sds_intr,
 	.enable_tx_intr			= qlcnic_82xx_enable_tx_intr,
 	.disable_tx_intr		= qlcnic_82xx_disable_tx_intr,
+	.get_saved_state		= qlcnic_82xx_get_saved_state,
+	.set_saved_state		= qlcnic_82xx_set_saved_state,
+	.cache_tmpl_hdr_values		= qlcnic_82xx_cache_tmpl_hdr_values,
+	.get_cap_size			= qlcnic_82xx_get_cap_size,
+	.set_sys_info			= qlcnic_82xx_set_sys_info,
+	.store_cap_mask			= qlcnic_82xx_store_cap_mask,
 };
 
 static int qlcnic_check_multi_tx_capability(struct qlcnic_adapter *adapter)
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c
index 7763962e2ec4..37b979b1266b 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c
@@ -211,6 +211,107 @@ enum qlcnic_minidump_opcode {
 	QLCNIC_DUMP_RDEND	= 255
 };
 
+inline u32 qlcnic_82xx_get_saved_state(void *t_hdr, u32 index)
+{
+	struct qlcnic_82xx_dump_template_hdr *hdr = t_hdr;
+
+	return hdr->saved_state[index];
+}
+
+inline void qlcnic_82xx_set_saved_state(void *t_hdr, u32 index,
+					u32 value)
+{
+	struct qlcnic_82xx_dump_template_hdr *hdr = t_hdr;
+
+	hdr->saved_state[index] = value;
+}
+
+void qlcnic_82xx_cache_tmpl_hdr_values(struct qlcnic_fw_dump *fw_dump)
+{
+	struct qlcnic_82xx_dump_template_hdr *hdr;
+
+	hdr = fw_dump->tmpl_hdr;
+	fw_dump->tmpl_hdr_size = hdr->size;
+	fw_dump->version = hdr->version;
+	fw_dump->num_entries = hdr->num_entries;
+	fw_dump->offset = hdr->offset;
+
+	hdr->drv_cap_mask = hdr->cap_mask;
+	fw_dump->cap_mask = hdr->cap_mask;
+}
+
+inline u32 qlcnic_82xx_get_cap_size(void *t_hdr, int index)
+{
+	struct qlcnic_82xx_dump_template_hdr *hdr = t_hdr;
+
+	return hdr->cap_sizes[index];
+}
+
+void qlcnic_82xx_set_sys_info(void *t_hdr, int idx, u32 value)
+{
+	struct qlcnic_82xx_dump_template_hdr *hdr = t_hdr;
+
+	hdr->sys_info[idx] = value;
+}
+
+void qlcnic_82xx_store_cap_mask(void *tmpl_hdr, u32 mask)
+{
+	struct qlcnic_82xx_dump_template_hdr *hdr = tmpl_hdr;
+
+	hdr->drv_cap_mask = mask;
+}
+
+inline u32 qlcnic_83xx_get_saved_state(void *t_hdr, u32 index)
+{
+	struct qlcnic_83xx_dump_template_hdr *hdr = t_hdr;
+
+	return hdr->saved_state[index];
+}
+
+inline void qlcnic_83xx_set_saved_state(void *t_hdr, u32 index,
+					u32 value)
+{
+	struct qlcnic_83xx_dump_template_hdr *hdr = t_hdr;
+
+	hdr->saved_state[index] = value;
+}
+
+void qlcnic_83xx_cache_tmpl_hdr_values(struct qlcnic_fw_dump *fw_dump)
+{
+	struct qlcnic_83xx_dump_template_hdr *hdr;
+
+	hdr = fw_dump->tmpl_hdr;
+	fw_dump->tmpl_hdr_size = hdr->size;
+	fw_dump->version = hdr->version;
+	fw_dump->num_entries = hdr->num_entries;
+	fw_dump->offset = hdr->offset;
+
+	hdr->drv_cap_mask = hdr->cap_mask;
+	fw_dump->cap_mask = hdr->cap_mask;
+}
+
+inline u32 qlcnic_83xx_get_cap_size(void *t_hdr, int index)
+{
+	struct qlcnic_83xx_dump_template_hdr *hdr = t_hdr;
+
+	return hdr->cap_sizes[index];
+}
+
+void qlcnic_83xx_set_sys_info(void *t_hdr, int idx, u32 value)
+{
+	struct qlcnic_83xx_dump_template_hdr *hdr = t_hdr;
+
+	hdr->sys_info[idx] = value;
+}
+
+void qlcnic_83xx_store_cap_mask(void *tmpl_hdr, u32 mask)
+{
+	struct qlcnic_83xx_dump_template_hdr *hdr;
+
+	hdr = tmpl_hdr;
+	hdr->drv_cap_mask = mask;
+}
+
 struct qlcnic_dump_operations {
 	enum qlcnic_minidump_opcode opcode;
 	u32 (*handler)(struct qlcnic_adapter *, struct qlcnic_dump_entry *,
@@ -238,11 +339,11 @@ static u32 qlcnic_dump_crb(struct qlcnic_adapter *adapter,
 static u32 qlcnic_dump_ctrl(struct qlcnic_adapter *adapter,
 			    struct qlcnic_dump_entry *entry, __le32 *buffer)
 {
+	void *hdr = adapter->ahw->fw_dump.tmpl_hdr;
+	struct __ctrl *ctr = &entry->region.ctrl;
 	int i, k, timeout = 0;
-	u32 addr, data;
+	u32 addr, data, temp;
 	u8 no_ops;
-	struct __ctrl *ctr = &entry->region.ctrl;
-	struct qlcnic_dump_template_hdr *t_hdr = adapter->ahw->fw_dump.tmpl_hdr;
 
 	addr = ctr->addr;
 	no_ops = ctr->no_ops;
@@ -285,29 +386,42 @@ static u32 qlcnic_dump_ctrl(struct qlcnic_adapter *adapter,
 				}
 				break;
 			case QLCNIC_DUMP_RD_SAVE:
-				if (ctr->index_a)
-					addr = t_hdr->saved_state[ctr->index_a];
+				temp = ctr->index_a;
+				if (temp)
+					addr = qlcnic_get_saved_state(adapter,
+								      hdr,
+								      temp);
 				data = qlcnic_ind_rd(adapter, addr);
-				t_hdr->saved_state[ctr->index_v] = data;
+				qlcnic_set_saved_state(adapter, hdr,
+						       ctr->index_v, data);
 				break;
 			case QLCNIC_DUMP_WRT_SAVED:
-				if (ctr->index_v)
-					data = t_hdr->saved_state[ctr->index_v];
+				temp = ctr->index_v;
+				if (temp)
+					data = qlcnic_get_saved_state(adapter,
+								      hdr,
+								      temp);
 				else
 					data = ctr->val1;
-				if (ctr->index_a)
-					addr = t_hdr->saved_state[ctr->index_a];
+
+				temp = ctr->index_a;
+				if (temp)
+					addr = qlcnic_get_saved_state(adapter,
+								      hdr,
+								      temp);
 				qlcnic_ind_wr(adapter, addr, data);
 				break;
 			case QLCNIC_DUMP_MOD_SAVE_ST:
-				data = t_hdr->saved_state[ctr->index_v];
+				data = qlcnic_get_saved_state(adapter, hdr,
+							      ctr->index_v);
 				data <<= ctr->shl_val;
 				data >>= ctr->shr_val;
 				if (ctr->val2)
 					data &= ctr->val2;
 				data |= ctr->val3;
 				data += ctr->val1;
-				t_hdr->saved_state[ctr->index_v] = data;
+				qlcnic_set_saved_state(adapter, hdr,
+						       ctr->index_v, data);
 				break;
 			default:
 				dev_info(&adapter->pdev->dev,
@@ -544,7 +658,7 @@ out:
 static int qlcnic_start_pex_dma(struct qlcnic_adapter *adapter,
 				struct __mem *mem)
 {
-	struct qlcnic_dump_template_hdr *tmpl_hdr;
+	struct qlcnic_83xx_dump_template_hdr *tmpl_hdr;
 	struct device *dev = &adapter->pdev->dev;
 	u32 dma_no, dma_base_addr, temp_addr;
 	int i, ret, dma_sts;
@@ -596,7 +710,7 @@ static u32 qlcnic_read_memory_pexdma(struct qlcnic_adapter *adapter,
 	struct qlcnic_fw_dump *fw_dump = &adapter->ahw->fw_dump;
 	u32 temp, dma_base_addr, size = 0, read_size = 0;
 	struct qlcnic_pex_dma_descriptor *dma_descr;
-	struct qlcnic_dump_template_hdr *tmpl_hdr;
+	struct qlcnic_83xx_dump_template_hdr *tmpl_hdr;
 	struct device *dev = &adapter->pdev->dev;
 	dma_addr_t dma_phys_addr;
 	void *dma_buffer;
@@ -938,8 +1052,8 @@ static int
 qlcnic_fw_flash_get_minidump_temp_size(struct qlcnic_adapter *adapter,
 				       struct qlcnic_cmd_args *cmd)
 {
-	struct qlcnic_dump_template_hdr tmp_hdr;
-	u32 size = sizeof(struct qlcnic_dump_template_hdr) / sizeof(u32);
+	struct qlcnic_83xx_dump_template_hdr tmp_hdr;
+	u32 size = sizeof(tmp_hdr) / sizeof(u32);
 	int ret = 0;
 
 	if (qlcnic_82xx_check(adapter))
@@ -1027,17 +1141,19 @@ free_mem:
 	return err;
 }
 
+#define QLCNIC_TEMPLATE_VERSION (0x20001)
+
 int qlcnic_fw_cmd_get_minidump_temp(struct qlcnic_adapter *adapter)
 {
-	int err;
-	u32 temp_size = 0;
-	u32 version, csum, *tmp_buf;
 	struct qlcnic_hardware_context *ahw;
-	struct qlcnic_dump_template_hdr *tmpl_hdr;
+	struct qlcnic_fw_dump *fw_dump;
+	u32 version, csum, *tmp_buf;
 	u8 use_flash_temp = 0;
+	u32 temp_size = 0;
+	int err;
 
 	ahw = adapter->ahw;
-
+	fw_dump = &ahw->fw_dump;
 	err = qlcnic_fw_get_minidump_temp_size(adapter, &version, &temp_size,
 					       &use_flash_temp);
 	if (err) {
@@ -1046,11 +1162,11 @@ int qlcnic_fw_cmd_get_minidump_temp(struct qlcnic_adapter *adapter)
 		return -EIO;
 	}
 
-	ahw->fw_dump.tmpl_hdr = vzalloc(temp_size);
-	if (!ahw->fw_dump.tmpl_hdr)
+	fw_dump->tmpl_hdr = vzalloc(temp_size);
+	if (!fw_dump->tmpl_hdr)
 		return -ENOMEM;
 
-	tmp_buf = (u32 *)ahw->fw_dump.tmpl_hdr;
+	tmp_buf = (u32 *)fw_dump->tmpl_hdr;
 	if (use_flash_temp)
 		goto flash_temp;
 
@@ -1065,8 +1181,8 @@ flash_temp:
 			dev_err(&adapter->pdev->dev,
 				"Failed to get minidump template header %d\n",
 				err);
-			vfree(ahw->fw_dump.tmpl_hdr);
-			ahw->fw_dump.tmpl_hdr = NULL;
+			vfree(fw_dump->tmpl_hdr);
+			fw_dump->tmpl_hdr = NULL;
 			return -EIO;
 		}
 	}
@@ -1076,21 +1192,22 @@ flash_temp:
 	if (csum) {
 		dev_err(&adapter->pdev->dev,
 			"Template header checksum validation failed\n");
-		vfree(ahw->fw_dump.tmpl_hdr);
-		ahw->fw_dump.tmpl_hdr = NULL;
+		vfree(fw_dump->tmpl_hdr);
+		fw_dump->tmpl_hdr = NULL;
 		return -EIO;
 	}
 
-	tmpl_hdr = ahw->fw_dump.tmpl_hdr;
-	tmpl_hdr->drv_cap_mask = tmpl_hdr->cap_mask;
+	qlcnic_cache_tmpl_hdr_values(adapter, fw_dump);
+
 	dev_info(&adapter->pdev->dev,
 		 "Default minidump capture mask 0x%x\n",
-		 tmpl_hdr->cap_mask);
+		 fw_dump->cap_mask);
 
-	if ((tmpl_hdr->version & 0xfffff) >= 0x20001)
-		ahw->fw_dump.use_pex_dma = true;
+	if (qlcnic_83xx_check(adapter) &&
+	    (fw_dump->version & 0xfffff) >= QLCNIC_TEMPLATE_VERSION)
+		fw_dump->use_pex_dma = true;
 	else
-		ahw->fw_dump.use_pex_dma = false;
+		fw_dump->use_pex_dma = false;
 
 	qlcnic_enable_fw_dump_state(adapter);
 
@@ -1099,21 +1216,22 @@ flash_temp:
 
 int qlcnic_dump_fw(struct qlcnic_adapter *adapter)
 {
-	__le32 *buffer;
-	u32 ocm_window;
-	char mesg[64];
-	char *msg[] = {mesg, NULL};
-	int i, k, ops_cnt, ops_index, dump_size = 0;
-	u32 entry_offset, dump, no_entries, buf_offset = 0;
-	struct qlcnic_dump_entry *entry;
 	struct qlcnic_fw_dump *fw_dump = &adapter->ahw->fw_dump;
-	struct qlcnic_dump_template_hdr *tmpl_hdr = fw_dump->tmpl_hdr;
 	static const struct qlcnic_dump_operations *fw_dump_ops;
+	struct qlcnic_83xx_dump_template_hdr *hdr_83xx;
+	u32 entry_offset, dump, no_entries, buf_offset = 0;
+	int i, k, ops_cnt, ops_index, dump_size = 0;
 	struct device *dev = &adapter->pdev->dev;
 	struct qlcnic_hardware_context *ahw;
-	void *temp_buffer;
+	struct qlcnic_dump_entry *entry;
+	void *temp_buffer, *tmpl_hdr;
+	u32 ocm_window;
+	__le32 *buffer;
+	char mesg[64];
+	char *msg[] = {mesg, NULL};
 
 	ahw = adapter->ahw;
+	tmpl_hdr = fw_dump->tmpl_hdr;
 
 	/* Return if we don't have firmware dump template header */
 	if (!tmpl_hdr)
@@ -1133,8 +1251,9 @@ int qlcnic_dump_fw(struct qlcnic_adapter *adapter)
 	netif_info(adapter->ahw, drv, adapter->netdev, "Take FW dump\n");
 	/* Calculate the size for dump data area only */
 	for (i = 2, k = 1; (i & QLCNIC_DUMP_MASK_MAX); i <<= 1, k++)
-		if (i & tmpl_hdr->drv_cap_mask)
-			dump_size += tmpl_hdr->cap_sizes[k];
+		if (i & fw_dump->cap_mask)
+			dump_size += qlcnic_get_cap_size(adapter, tmpl_hdr, k);
+
 	if (!dump_size)
 		return -EIO;
 
@@ -1144,10 +1263,10 @@ int qlcnic_dump_fw(struct qlcnic_adapter *adapter)
 
 	buffer = fw_dump->data;
 	fw_dump->size = dump_size;
-	no_entries = tmpl_hdr->num_entries;
-	entry_offset = tmpl_hdr->offset;
-	tmpl_hdr->sys_info[0] = QLCNIC_DRIVER_VERSION;
-	tmpl_hdr->sys_info[1] = adapter->fw_version;
+	no_entries = fw_dump->num_entries;
+	entry_offset = fw_dump->offset;
+	qlcnic_set_sys_info(adapter, tmpl_hdr, 0, QLCNIC_DRIVER_VERSION);
+	qlcnic_set_sys_info(adapter, tmpl_hdr, 1, adapter->fw_version);
 
 	if (fw_dump->use_pex_dma) {
 		temp_buffer = dma_alloc_coherent(dev, QLC_PEX_DMA_READ_SIZE,
@@ -1163,16 +1282,17 @@ int qlcnic_dump_fw(struct qlcnic_adapter *adapter)
 		ops_cnt = ARRAY_SIZE(qlcnic_fw_dump_ops);
 		fw_dump_ops = qlcnic_fw_dump_ops;
 	} else {
+		hdr_83xx = tmpl_hdr;
 		ops_cnt = ARRAY_SIZE(qlcnic_83xx_fw_dump_ops);
 		fw_dump_ops = qlcnic_83xx_fw_dump_ops;
-		ocm_window = tmpl_hdr->ocm_wnd_reg[adapter->ahw->pci_func];
-		tmpl_hdr->saved_state[QLC_83XX_OCM_INDEX] = ocm_window;
-		tmpl_hdr->saved_state[QLC_83XX_PCI_INDEX] = ahw->pci_func;
+		ocm_window = hdr_83xx->ocm_wnd_reg[ahw->pci_func];
+		hdr_83xx->saved_state[QLC_83XX_OCM_INDEX] = ocm_window;
+		hdr_83xx->saved_state[QLC_83XX_PCI_INDEX] = ahw->pci_func;
 	}
 
 	for (i = 0; i < no_entries; i++) {
-		entry = (void *)tmpl_hdr + entry_offset;
-		if (!(entry->hdr.mask & tmpl_hdr->drv_cap_mask)) {
+		entry = tmpl_hdr + entry_offset;
+		if (!(entry->hdr.mask & fw_dump->cap_mask)) {
 			entry->hdr.flags |= QLCNIC_DUMP_SKIP;
 			entry_offset += entry->hdr.offset;
 			continue;
@@ -1209,8 +1329,9 @@ int qlcnic_dump_fw(struct qlcnic_adapter *adapter)
 
 	fw_dump->clr = 1;
 	snprintf(mesg, sizeof(mesg), "FW_DUMP=%s", adapter->netdev->name);
-	dev_info(dev, "%s: Dump data %d bytes captured, template header size %d bytes\n",
-		 adapter->netdev->name, fw_dump->size, tmpl_hdr->size);
+	netdev_info(adapter->netdev,
+		    "Dump data %d bytes captured, template header size %d bytes\n",
+		    fw_dump->size, fw_dump->tmpl_hdr_size);
 	/* Send a udev event to notify availability of FW dump */
 	kobject_uevent_env(&dev->kobj, KOBJ_CHANGE, msg);
 
-- 
cgit v1.2.2


From d91abf903b1d39f46251305328e245c76f14b349 Mon Sep 17 00:00:00 2001
From: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Date: Fri, 21 Feb 2014 13:20:11 -0500
Subject: qlcnic: Updates to QLogic application/driver interface for virtual
 NIC configuration

Qlogic application interface in the driver which has larger than 8 vNIC
configuration support has been updated to handle the following cases:

o Only 8 or lower total vNICs were enabled within the vNIC 0-7 range
o vNICs were enabled in the vNIC 0-15 range such that enabled vNICs were
  not contiguous and only 8 or lower number of total VNICs were enabled
o Disconnect in the vNIC mapping between application and driver when the
  enabled VNICs were dis contiguous

Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c | 102 ++++++++--------------
 1 file changed, 37 insertions(+), 65 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c
index 3d64113a35af..448d156c3d08 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c
@@ -350,33 +350,15 @@ static ssize_t qlcnic_sysfs_write_mem(struct file *filp, struct kobject *kobj,
 	return size;
 }
 
-static u32 qlcnic_get_pci_func_count(struct qlcnic_adapter *adapter)
-{
-	struct qlcnic_hardware_context *ahw = adapter->ahw;
-	u32 count = 0;
-
-	if (!(adapter->flags & QLCNIC_ESWITCH_ENABLED))
-		return ahw->total_nic_func;
-
-	if (ahw->total_pci_func <= QLC_DEFAULT_VNIC_COUNT)
-		count = QLC_DEFAULT_VNIC_COUNT;
-	else
-		count = ahw->max_vnic_func;
-
-	return count;
-}
-
 int qlcnic_is_valid_nic_func(struct qlcnic_adapter *adapter, u8 pci_func)
 {
-	u32 pci_func_count = qlcnic_get_pci_func_count(adapter);
 	int i;
 
-	for (i = 0; i < pci_func_count; i++) {
+	for (i = 0; i < adapter->ahw->max_vnic_func; i++) {
 		if (adapter->npars[i].pci_func == pci_func)
 			return i;
 	}
-
-	return -1;
+	return -EINVAL;
 }
 
 static int validate_pm_config(struct qlcnic_adapter *adapter,
@@ -464,23 +446,21 @@ static ssize_t qlcnic_sysfs_read_pm_config(struct file *filp,
 {
 	struct device *dev = container_of(kobj, struct device, kobj);
 	struct qlcnic_adapter *adapter = dev_get_drvdata(dev);
-	u32 pci_func_count = qlcnic_get_pci_func_count(adapter);
 	struct qlcnic_pm_func_cfg *pm_cfg;
-	int i, pm_cfg_size;
 	u8 pci_func;
+	u32 count;
+	int i;
 
-	pm_cfg_size = pci_func_count * sizeof(*pm_cfg);
-	if (size != pm_cfg_size)
-		return QL_STATUS_INVALID_PARAM;
-
-	memset(buf, 0, pm_cfg_size);
+	memset(buf, 0, size);
 	pm_cfg = (struct qlcnic_pm_func_cfg *)buf;
-
-	for (i = 0; i < pci_func_count; i++) {
+	count = size / sizeof(struct qlcnic_pm_func_cfg);
+	for (i = 0; i < adapter->ahw->total_nic_func; i++) {
 		pci_func = adapter->npars[i].pci_func;
-		if (!adapter->npars[i].active)
+		if (pci_func >= count) {
+			dev_dbg(dev, "%s: Total nic functions[%d], App sent function count[%d]\n",
+				__func__, adapter->ahw->total_nic_func, count);
 			continue;
-
+		}
 		if (!adapter->npars[i].eswitch_status)
 			continue;
 
@@ -494,7 +474,6 @@ static ssize_t qlcnic_sysfs_read_pm_config(struct file *filp,
 static int validate_esw_config(struct qlcnic_adapter *adapter,
 			       struct qlcnic_esw_func_cfg *esw_cfg, int count)
 {
-	u32 pci_func_count = qlcnic_get_pci_func_count(adapter);
 	struct qlcnic_hardware_context *ahw = adapter->ahw;
 	int i, ret;
 	u32 op_mode;
@@ -507,7 +486,7 @@ static int validate_esw_config(struct qlcnic_adapter *adapter,
 
 	for (i = 0; i < count; i++) {
 		pci_func = esw_cfg[i].pci_func;
-		if (pci_func >= pci_func_count)
+		if (pci_func >= ahw->max_vnic_func)
 			return QL_STATUS_INVALID_PARAM;
 
 		if (adapter->ahw->op_mode == QLCNIC_MGMT_FUNC)
@@ -642,23 +621,21 @@ static ssize_t qlcnic_sysfs_read_esw_config(struct file *file,
 {
 	struct device *dev = container_of(kobj, struct device, kobj);
 	struct qlcnic_adapter *adapter = dev_get_drvdata(dev);
-	u32 pci_func_count = qlcnic_get_pci_func_count(adapter);
 	struct qlcnic_esw_func_cfg *esw_cfg;
-	size_t esw_cfg_size;
-	u8 i, pci_func;
-
-	esw_cfg_size = pci_func_count * sizeof(*esw_cfg);
-	if (size != esw_cfg_size)
-		return QL_STATUS_INVALID_PARAM;
+	u8 pci_func;
+	u32 count;
+	int i;
 
-	memset(buf, 0, esw_cfg_size);
+	memset(buf, 0, size);
 	esw_cfg = (struct qlcnic_esw_func_cfg *)buf;
-
-	for (i = 0; i < pci_func_count; i++) {
+	count = size / sizeof(struct qlcnic_esw_func_cfg);
+	for (i = 0; i < adapter->ahw->total_nic_func; i++) {
 		pci_func = adapter->npars[i].pci_func;
-		if (!adapter->npars[i].active)
+		if (pci_func >= count) {
+			dev_dbg(dev, "%s: Total nic functions[%d], App sent function count[%d]\n",
+				__func__, adapter->ahw->total_nic_func, count);
 			continue;
-
+		}
 		if (!adapter->npars[i].eswitch_status)
 			continue;
 
@@ -741,23 +718,24 @@ static ssize_t qlcnic_sysfs_read_npar_config(struct file *file,
 {
 	struct device *dev = container_of(kobj, struct device, kobj);
 	struct qlcnic_adapter *adapter = dev_get_drvdata(dev);
-	u32 pci_func_count = qlcnic_get_pci_func_count(adapter);
 	struct qlcnic_npar_func_cfg *np_cfg;
 	struct qlcnic_info nic_info;
-	size_t np_cfg_size;
 	int i, ret;
-
-	np_cfg_size = pci_func_count * sizeof(*np_cfg);
-	if (size != np_cfg_size)
-		return QL_STATUS_INVALID_PARAM;
+	u32 count;
 
 	memset(&nic_info, 0, sizeof(struct qlcnic_info));
-	memset(buf, 0, np_cfg_size);
+	memset(buf, 0, size);
 	np_cfg = (struct qlcnic_npar_func_cfg *)buf;
 
-	for (i = 0; i < pci_func_count; i++) {
+	count = size / sizeof(struct qlcnic_npar_func_cfg);
+	for (i = 0; i < adapter->ahw->total_nic_func; i++) {
 		if (qlcnic_is_valid_nic_func(adapter, i) < 0)
 			continue;
+		if (adapter->npars[i].pci_func >= count) {
+			dev_dbg(dev, "%s: Total nic functions[%d], App sent function count[%d]\n",
+				__func__, adapter->ahw->total_nic_func, count);
+			continue;
+		}
 		ret = qlcnic_get_nic_info(adapter, &nic_info, i);
 		if (ret)
 			return ret;
@@ -783,7 +761,6 @@ static ssize_t qlcnic_sysfs_get_port_stats(struct file *file,
 {
 	struct device *dev = container_of(kobj, struct device, kobj);
 	struct qlcnic_adapter *adapter = dev_get_drvdata(dev);
-	u32 pci_func_count = qlcnic_get_pci_func_count(adapter);
 	struct qlcnic_esw_statistics port_stats;
 	int ret;
 
@@ -793,7 +770,7 @@ static ssize_t qlcnic_sysfs_get_port_stats(struct file *file,
 	if (size != sizeof(struct qlcnic_esw_statistics))
 		return QL_STATUS_INVALID_PARAM;
 
-	if (offset >= pci_func_count)
+	if (offset >= adapter->ahw->max_vnic_func)
 		return QL_STATUS_INVALID_PARAM;
 
 	memset(&port_stats, 0, size);
@@ -884,13 +861,12 @@ static ssize_t qlcnic_sysfs_clear_port_stats(struct file *file,
 
 	struct device *dev = container_of(kobj, struct device, kobj);
 	struct qlcnic_adapter *adapter = dev_get_drvdata(dev);
-	u32 pci_func_count = qlcnic_get_pci_func_count(adapter);
 	int ret;
 
 	if (qlcnic_83xx_check(adapter))
 		return QLC_STATUS_UNSUPPORTED_CMD;
 
-	if (offset >= pci_func_count)
+	if (offset >= adapter->ahw->max_vnic_func)
 		return QL_STATUS_INVALID_PARAM;
 
 	ret = qlcnic_clear_esw_stats(adapter, QLCNIC_STATS_PORT, offset,
@@ -914,17 +890,12 @@ static ssize_t qlcnic_sysfs_read_pci_config(struct file *file,
 {
 	struct device *dev = container_of(kobj, struct device, kobj);
 	struct qlcnic_adapter *adapter = dev_get_drvdata(dev);
-	u32 pci_func_count = qlcnic_get_pci_func_count(adapter);
 	struct qlcnic_pci_func_cfg *pci_cfg;
 	struct qlcnic_pci_info *pci_info;
-	size_t pci_cfg_sz;
 	int i, ret;
+	u32 count;
 
-	pci_cfg_sz = pci_func_count * sizeof(*pci_cfg);
-	if (size != pci_cfg_sz)
-		return QL_STATUS_INVALID_PARAM;
-
-	pci_info = kcalloc(pci_func_count, sizeof(*pci_info), GFP_KERNEL);
+	pci_info = kcalloc(size, sizeof(*pci_info), GFP_KERNEL);
 	if (!pci_info)
 		return -ENOMEM;
 
@@ -935,7 +906,8 @@ static ssize_t qlcnic_sysfs_read_pci_config(struct file *file,
 	}
 
 	pci_cfg = (struct qlcnic_pci_func_cfg *)buf;
-	for (i = 0; i < pci_func_count; i++) {
+	count = size / sizeof(struct qlcnic_pci_func_cfg);
+	for (i = 0; i < count; i++) {
 		pci_cfg[i].pci_func = pci_info[i].id;
 		pci_cfg[i].func_type = pci_info[i].type;
 		pci_cfg[i].func_state = 0;
-- 
cgit v1.2.2


From 2a355aecd27f88d26ba8213b4e55123522ef5eae Mon Sep 17 00:00:00 2001
From: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Date: Fri, 21 Feb 2014 13:20:12 -0500
Subject: qlcnic: Enhance driver message in failed state.

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
index 964ba457a7c6..a33547292878 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
@@ -2450,8 +2450,8 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		if (err) {
 			switch (err) {
 			case -ENOTRECOVERABLE:
-				dev_err(&pdev->dev, "Adapter initialization failed due to a faulty hardware. Please reboot\n");
-				dev_err(&pdev->dev, "If reboot doesn't help, please replace the adapter with new one and return the faulty adapter for repair\n");
+				dev_err(&pdev->dev, "Adapter initialization failed due to a faulty hardware\n");
+				dev_err(&pdev->dev, "Please replace the adapter with new one and return the faulty adapter for repair\n");
 				goto err_out_free_hw;
 			case -ENOMEM:
 				dev_err(&pdev->dev, "Adapter initialization failed. Please reboot\n");
-- 
cgit v1.2.2


From cecd59d84d8e401db7860fc5fae503c965e5c470 Mon Sep 17 00:00:00 2001
From: Rajesh Borundia <rajesh.borundia@qlogic.com>
Date: Fri, 21 Feb 2014 13:20:13 -0500
Subject: qlcnic: Allow vlan0 traffic

o Adapter allows vlan0 traffic in case of SR-IOV after setting
  QLC_SRIOV_ALLOW_VLAN0 bit even though we do not add vlan0 filters.

Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c
index 09acf15c3a56..a28460cf873d 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c
@@ -17,6 +17,7 @@
 #define QLC_MAC_STAR_DEL	7
 #define QLC_VF_FLOOD_BIT	BIT_16
 #define QLC_FLOOD_MODE		0x5
+#define QLC_SRIOV_ALLOW_VLAN0	BIT_19
 
 static int qlcnic_sriov_pf_get_vport_handle(struct qlcnic_adapter *, u8);
 
@@ -337,8 +338,11 @@ static int qlcnic_sriov_pf_cfg_vlan_filtering(struct qlcnic_adapter *adapter,
 		return err;
 
 	cmd.req.arg[1] = 0x4;
-	if (enable)
+	if (enable) {
 		cmd.req.arg[1] |= BIT_16;
+		if (qlcnic_84xx_check(adapter))
+			cmd.req.arg[1] |= QLC_SRIOV_ALLOW_VLAN0;
+	}
 
 	err = qlcnic_issue_cmd(adapter, &cmd);
 	if (err)
-- 
cgit v1.2.2


From 1a51042bb8fc6317270bb70daf5eb1c57002340a Mon Sep 17 00:00:00 2001
From: Harish Patil <harish.patil@qlogic.com>
Date: Fri, 21 Feb 2014 13:20:14 -0500
Subject: qlcnic: Enhance semaphore lock access failure error message

Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c | 22 +++++++++++++++-------
 1 file changed, 15 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c
index 03d18a0be6ce..9f3adf4e70b5 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c
@@ -317,9 +317,7 @@ static void qlcnic_write_window_reg(u32 addr, void __iomem *bar0, u32 data)
 int
 qlcnic_pcie_sem_lock(struct qlcnic_adapter *adapter, int sem, u32 id_reg)
 {
-	int timeout = 0;
-	int err = 0;
-	u32 done = 0;
+	int timeout = 0, err = 0, done = 0;
 
 	while (!done) {
 		done = QLCRD32(adapter, QLCNIC_PCIE_REG(PCIE_SEM_LOCK(sem)),
@@ -327,10 +325,20 @@ qlcnic_pcie_sem_lock(struct qlcnic_adapter *adapter, int sem, u32 id_reg)
 		if (done == 1)
 			break;
 		if (++timeout >= QLCNIC_PCIE_SEM_TIMEOUT) {
-			dev_err(&adapter->pdev->dev,
-				"Failed to acquire sem=%d lock; holdby=%d\n",
-				sem,
-				id_reg ? QLCRD32(adapter, id_reg, &err) : -1);
+			if (id_reg) {
+				done = QLCRD32(adapter, id_reg, &err);
+				if (done != -1)
+					dev_err(&adapter->pdev->dev,
+						"Failed to acquire sem=%d lock held by=%d\n",
+						sem, done);
+				else
+					dev_err(&adapter->pdev->dev,
+						"Failed to acquire sem=%d lock",
+						sem);
+			} else {
+				dev_err(&adapter->pdev->dev,
+					"Failed to acquire sem=%d lock", sem);
+			}
 			return -EIO;
 		}
 		msleep(1);
-- 
cgit v1.2.2


From 3dd4705698f12a076204c6825c754297633a9a8d Mon Sep 17 00:00:00 2001
From: Shahed Shaikh <shahed.shaikh@qlogic.com>
Date: Fri, 21 Feb 2014 13:20:15 -0500
Subject: qlcnic: Update version to 5.3.56

Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/qlogic/qlcnic/qlcnic.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
index 6ad1bcebc0fe..df9daa335292 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
@@ -38,8 +38,8 @@
 
 #define _QLCNIC_LINUX_MAJOR 5
 #define _QLCNIC_LINUX_MINOR 3
-#define _QLCNIC_LINUX_SUBVERSION 55
-#define QLCNIC_LINUX_VERSIONID  "5.3.55"
+#define _QLCNIC_LINUX_SUBVERSION 56
+#define QLCNIC_LINUX_VERSIONID  "5.3.56"
 #define QLCNIC_DRV_IDC_VER  0x01
 #define QLCNIC_DRIVER_VERSION  ((_QLCNIC_LINUX_MAJOR << 16) |\
 		 (_QLCNIC_LINUX_MINOR << 8) | (_QLCNIC_LINUX_SUBVERSION))
-- 
cgit v1.2.2


From b17c706987fa6f28bdc1771c8266e7a69e22adcb Mon Sep 17 00:00:00 2001
From: Daniel Borkmann <dborkman@redhat.com>
Date: Sat, 22 Feb 2014 14:01:53 +0100
Subject: loopback: sctp: add NETIF_F_SCTP_CSUM to device features

Drivers are allowed to set NETIF_F_SCTP_CSUM if they have
hardware crc32c checksumming support for the SCTP protocol.
Currently, NETIF_F_SCTP_CSUM flag is available in igb,
ixgbe, i40e/i40evf drivers and for vlan devices.

If we don't have NETIF_F_SCTP_CSUM then crc32c is done
through CPU instructions, invoked from crypto layer, or
if not available as slow-path fallback in software.

Currently, loopback device propagates checksum offloading
feature flags in dev->features, but is missing SCTP checksum
offloading. Therefore, account for NETIF_F_SCTP_CSUM as
well.

Before patch:

./netperf_sctp -H 192.168.0.100 -t SCTP_STREAM_MANY
SCTP 1-TO-MANY STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.0.100 () port 0 AF_INET
Recv   Send    Send
Socket Socket  Message  Elapsed
Size   Size    Size     Time     Throughput
bytes  bytes   bytes    secs.    10^6bits/sec

4194304 4194304   4096    10.00    4683.50

After patch:

./netperf_sctp -H 192.168.0.100 -t SCTP_STREAM_MANY
SCTP 1-TO-MANY STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.0.100 () port 0 AF_INET
Recv   Send    Send
Socket Socket  Message  Elapsed
Size   Size    Size     Time     Throughput
bytes  bytes   bytes    secs.    10^6bits/sec

4194304 4194304   4096    10.00    15348.26

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/loopback.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net')

diff --git a/drivers/net/loopback.c b/drivers/net/loopback.c
index 771c9bfa7d31..282effee7e1c 100644
--- a/drivers/net/loopback.c
+++ b/drivers/net/loopback.c
@@ -176,6 +176,7 @@ static void loopback_setup(struct net_device *dev)
 		| NETIF_F_UFO
 		| NETIF_F_HW_CSUM
 		| NETIF_F_RXCSUM
+		| NETIF_F_SCTP_CSUM
 		| NETIF_F_HIGHDMA
 		| NETIF_F_LLTX
 		| NETIF_F_NETNS_LOCAL
-- 
cgit v1.2.2


From e8b39015b591f359d464d026170dcf76f7ed5b8e Mon Sep 17 00:00:00 2001
From: Ben Hutchings <ben@decadent.org.uk>
Date: Sun, 23 Feb 2014 00:03:24 +0000
Subject: cgxb4: Stop using ethtool SPEED_* constants

ethtool speed values are just numbers of megabits and there is no need
to add SPEED_40000.  To be consistent, use integer constants directly
for all speeds.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 20 ++++++++++----------
 drivers/net/ethernet/chelsio/cxgb4/t4_hw.c      |  8 ++++----
 2 files changed, 14 insertions(+), 14 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index 4660f55e292b..da4edc1c77b3 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -427,16 +427,16 @@ static void link_report(struct net_device *dev)
 		const struct port_info *p = netdev_priv(dev);
 
 		switch (p->link_cfg.speed) {
-		case SPEED_10000:
+		case 10000:
 			s = "10Gbps";
 			break;
-		case SPEED_1000:
+		case 1000:
 			s = "1000Mbps";
 			break;
-		case SPEED_100:
+		case 100:
 			s = "100Mbps";
 			break;
-		case 40000: /* Need a SPEED_40000 in ethtool.h */
+		case 40000:
 			s = "40Gbps";
 			break;
 		}
@@ -2274,13 +2274,13 @@ static int get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 
 static unsigned int speed_to_caps(int speed)
 {
-	if (speed == SPEED_100)
+	if (speed == 100)
 		return FW_PORT_CAP_SPEED_100M;
-	if (speed == SPEED_1000)
+	if (speed == 1000)
 		return FW_PORT_CAP_SPEED_1G;
-	if (speed == SPEED_10000)
+	if (speed == 10000)
 		return FW_PORT_CAP_SPEED_10G;
-	if (speed == 40000) /* Need SPEED_40000 in ethtool.h */
+	if (speed == 40000)
 		return FW_PORT_CAP_SPEED_40G;
 	return 0;
 }
@@ -2310,8 +2310,8 @@ static int set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 		cap = speed_to_caps(speed);
 
 		if (!(lc->supported & cap) ||
-		    (speed == SPEED_1000) ||
-		    (speed == SPEED_10000) ||
+		    (speed == 1000) ||
+		    (speed == 10000) ||
 		    (speed == 40000))
 			return -EINVAL;
 		lc->requested_speed = cap;
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
index 7ae756defc95..d3c2a516fa88 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
@@ -3567,13 +3567,13 @@ int t4_handle_fw_rpl(struct adapter *adap, const __be64 *rpl)
 		if (stat & FW_PORT_CMD_TXPAUSE)
 			fc |= PAUSE_TX;
 		if (stat & FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_100M))
-			speed = SPEED_100;
+			speed = 100;
 		else if (stat & FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_1G))
-			speed = SPEED_1000;
+			speed = 1000;
 		else if (stat & FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_10G))
-			speed = SPEED_10000;
+			speed = 10000;
 		else if (stat & FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_40G))
-			speed = 40000; /* Need SPEED_40000 in ethtool.h */
+			speed = 40000;
 
 		if (link_ok != lc->link_ok || speed != lc->speed ||
 		    fc != lc->fc) {                    /* something changed */
-- 
cgit v1.2.2


From 5343a10d15362da46877d8f07b7c23d4c95f8277 Mon Sep 17 00:00:00 2001
From: Fabio Estevam <fabio.estevam@freescale.com>
Date: Mon, 24 Feb 2014 00:47:24 -0300
Subject: net: bcmgenet: Use devm_ioremap_resource()

According to Documentation/driver-model/devres.txt, devm_request_and_ioremap()
is deprecated, so use devm_ioremap_resource() instead.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/genet/bcmgenet.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index 0ebc29769510..844e0811388d 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -2481,10 +2481,9 @@ static int bcmgenet_probe(struct platform_device *pdev)
 	}
 
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	priv->base = devm_request_and_ioremap(&pdev->dev, r);
-	if (!priv->base) {
-		dev_err(&pdev->dev, "can't ioremap\n");
-		err = -EINVAL;
+	priv->base = devm_ioremap_resource(&pdev->dev, r);
+	if (IS_ERR(priv->base)) {
+		err = PTR_ERR(priv->base);
 		goto err;
 	}
 
-- 
cgit v1.2.2


From 225a9a256627a0b380183364688708a4b5b0a0e4 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Mon, 24 Feb 2014 19:33:27 -0500
Subject: bcmgenet: Deleted unnecessary select_queue method.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/genet/bcmgenet.c | 7 -------
 1 file changed, 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index 844e0811388d..192069d2745e 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -2280,17 +2280,10 @@ static int bcmgenet_set_mac_addr(struct net_device *dev, void *p)
 	return 0;
 }
 
-static u16 bcmgenet_select_queue(struct net_device *dev,
-		struct sk_buff *skb, void *accel_priv)
-{
-	return netif_is_multiqueue(dev) ? skb->queue_mapping : 0;
-}
-
 static const struct net_device_ops bcmgenet_netdev_ops = {
 	.ndo_open		= bcmgenet_open,
 	.ndo_stop		= bcmgenet_close,
 	.ndo_start_xmit		= bcmgenet_xmit,
-	.ndo_select_queue	= bcmgenet_select_queue,
 	.ndo_tx_timeout		= bcmgenet_timeout,
 	.ndo_set_rx_mode	= bcmgenet_set_rx_mode,
 	.ndo_set_mac_address	= bcmgenet_set_mac_addr,
-- 
cgit v1.2.2


From a328ac92d3149d191a92b681a832d417da72a74c Mon Sep 17 00:00:00 2001
From: Claudiu Manoil <claudiu.manoil@freescale.com>
Date: Mon, 24 Feb 2014 12:13:42 +0200
Subject: gianfar: Implement MAC reset and reconfig procedure

The main MAC config registers like: RCTRL/TCTRL, MRBLR,
MAXFRM, RXIC/TXIC, most fields of MACCFG1/2, should not
be changed on-the-fly, but at least after stopping the
DMA and disabling the Rx/Tx blocks and, for increased
reliability, after a MAC soft reset.

Impelement a complete MAC soft reset and reconfig procedure
following the latest HW advisories - gfar_mac_reset() - to
replace gfar_mac_init() and (the confusing) init_registers()
functions.

Factor out separate config functions for RCTRL and TCTRL,
insure programming order of the relevant config regs after
MAC soft reset.

Split gfar_hw_init() into gfar_mac_reset() and the remaining
global regs that don't need to be reconfigured after MAC soft
reset (FIFOCFG, ATTRELI, HW counters a.s.o).

As gfar_hw_init() now makes all the register writes @probe()
time, based on all the device flags and config options, it
must be moved further down, just before register_netdev(),
as the last config step when the config values are comitted
to HW.  Also, move netif_carrier_off() after register_netdev(),
because it has no effect if called before.

Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/freescale/gianfar.c | 172 ++++++++++++++++---------------
 1 file changed, 90 insertions(+), 82 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index a2977a8df645..446e9c99379d 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -121,7 +121,6 @@ static irqreturn_t gfar_error(int irq, void *dev_id);
 static irqreturn_t gfar_transmit(int irq, void *dev_id);
 static irqreturn_t gfar_interrupt(int irq, void *dev_id);
 static void adjust_link(struct net_device *dev);
-static void init_registers(struct net_device *dev);
 static int init_phy(struct net_device *dev);
 static int gfar_probe(struct platform_device *ofdev);
 static int gfar_remove(struct platform_device *ofdev);
@@ -330,18 +329,10 @@ static void gfar_init_tx_rx_base(struct gfar_private *priv)
 	}
 }
 
-static void gfar_init_mac(struct net_device *ndev)
+static void gfar_mac_rx_config(struct gfar_private *priv)
 {
-	struct gfar_private *priv = netdev_priv(ndev);
 	struct gfar __iomem *regs = priv->gfargrp[0].regs;
 	u32 rctrl = 0;
-	u32 tctrl = 0;
-
-	/* write the tx/rx base registers */
-	gfar_init_tx_rx_base(priv);
-
-	/* Configure the coalescing support */
-	gfar_configure_coalescing_all(priv);
 
 	/* set this when rx hw offload (TOE) functions are being used */
 	priv->uses_rxfcb = 0;
@@ -353,18 +344,16 @@ static void gfar_init_mac(struct net_device *ndev)
 	}
 
 	/* Restore PROMISC mode */
-	if (ndev->flags & IFF_PROMISC)
+	if (priv->ndev->flags & IFF_PROMISC)
 		rctrl |= RCTRL_PROM;
 
-	if (ndev->features & NETIF_F_RXCSUM) {
+	if (priv->ndev->features & NETIF_F_RXCSUM) {
 		rctrl |= RCTRL_CHECKSUMMING;
 		priv->uses_rxfcb = 1;
 	}
 
 	if (priv->extended_hash) {
 		rctrl |= RCTRL_EXTHASH;
-
-		gfar_clear_exact_match(ndev);
 		rctrl |= RCTRL_EMEN;
 	}
 
@@ -379,15 +368,21 @@ static void gfar_init_mac(struct net_device *ndev)
 		priv->uses_rxfcb = 1;
 	}
 
-	if (ndev->features & NETIF_F_HW_VLAN_CTAG_RX) {
+	if (priv->ndev->features & NETIF_F_HW_VLAN_CTAG_RX) {
 		rctrl |= RCTRL_VLEX | RCTRL_PRSDEP_INIT;
 		priv->uses_rxfcb = 1;
 	}
 
 	/* Init rctrl based on our settings */
 	gfar_write(&regs->rctrl, rctrl);
+}
 
-	if (ndev->features & NETIF_F_IP_CSUM)
+static void gfar_mac_tx_config(struct gfar_private *priv)
+{
+	struct gfar __iomem *regs = priv->gfargrp[0].regs;
+	u32 tctrl = 0;
+
+	if (priv->ndev->features & NETIF_F_IP_CSUM)
 		tctrl |= TCTRL_INIT_CSUM;
 
 	if (priv->prio_sched_en)
@@ -1016,28 +1011,94 @@ static void gfar_detect_errata(struct gfar_private *priv)
 			 priv->errata);
 }
 
-static void gfar_hw_init(struct gfar_private *priv)
+static void gfar_mac_reset(struct gfar_private *priv)
 {
 	struct gfar __iomem *regs = priv->gfargrp[0].regs;
-	u32 tempval, attrs;
+	u32 tempval;
 
 	/* Reset MAC layer */
 	gfar_write(&regs->maccfg1, MACCFG1_SOFT_RESET);
 
 	/* We need to delay at least 3 TX clocks */
-	udelay(2);
+	udelay(3);
 
 	/* the soft reset bit is not self-resetting, so we need to
 	 * clear it before resuming normal operation
 	 */
 	gfar_write(&regs->maccfg1, 0);
 
+	udelay(3);
+
+	/* Initialize the max receive buffer length */
+	gfar_write(&regs->mrblr, priv->rx_buffer_size);
+
+	/* Initialize the Minimum Frame Length Register */
+	gfar_write(&regs->minflr, MINFLR_INIT_SETTINGS);
+
 	/* Initialize MACCFG2. */
 	tempval = MACCFG2_INIT_SETTINGS;
 	if (gfar_has_errata(priv, GFAR_ERRATA_74))
 		tempval |= MACCFG2_HUGEFRAME | MACCFG2_LENGTHCHECK;
 	gfar_write(&regs->maccfg2, tempval);
 
+	/* Clear mac addr hash registers */
+	gfar_write(&regs->igaddr0, 0);
+	gfar_write(&regs->igaddr1, 0);
+	gfar_write(&regs->igaddr2, 0);
+	gfar_write(&regs->igaddr3, 0);
+	gfar_write(&regs->igaddr4, 0);
+	gfar_write(&regs->igaddr5, 0);
+	gfar_write(&regs->igaddr6, 0);
+	gfar_write(&regs->igaddr7, 0);
+
+	gfar_write(&regs->gaddr0, 0);
+	gfar_write(&regs->gaddr1, 0);
+	gfar_write(&regs->gaddr2, 0);
+	gfar_write(&regs->gaddr3, 0);
+	gfar_write(&regs->gaddr4, 0);
+	gfar_write(&regs->gaddr5, 0);
+	gfar_write(&regs->gaddr6, 0);
+	gfar_write(&regs->gaddr7, 0);
+
+	if (priv->extended_hash)
+		gfar_clear_exact_match(priv->ndev);
+
+	gfar_mac_rx_config(priv);
+
+	gfar_mac_tx_config(priv);
+
+	gfar_set_mac_address(priv->ndev);
+
+	gfar_set_multi(priv->ndev);
+
+	/* clear ievent and imask before configuring coalescing */
+	gfar_ints_disable(priv);
+
+	/* Configure the coalescing support */
+	gfar_configure_coalescing_all(priv);
+}
+
+static void gfar_hw_init(struct gfar_private *priv)
+{
+	struct gfar __iomem *regs = priv->gfargrp[0].regs;
+	u32 attrs;
+
+	/* Stop the DMA engine now, in case it was running before
+	 * (The firmware could have used it, and left it running).
+	 */
+	gfar_halt(priv);
+
+	gfar_mac_reset(priv);
+
+	/* Zero out the rmon mib registers if it has them */
+	if (priv->device_flags & FSL_GIANFAR_DEV_HAS_RMON) {
+		memset_io(&(regs->rmon), 0, sizeof(struct rmon_mib));
+
+		/* Mask off the CAM interrupts */
+		gfar_write(&regs->rmon.cam1, 0xffffffff);
+		gfar_write(&regs->rmon.cam2, 0xffffffff);
+	}
+
 	/* Initialize ECNTRL */
 	gfar_write(&regs->ecntrl, ECNTRL_INIT_SETTINGS);
 
@@ -1137,13 +1198,6 @@ static int gfar_probe(struct platform_device *ofdev)
 
 	gfar_detect_errata(priv);
 
-	/* Stop the DMA engine now, in case it was running before
-	 * (The firmware could have used it, and left it running).
-	 */
-	gfar_halt(priv);
-
-	gfar_hw_init(priv);
-
 	/* Set the dev->base_addr to the gfar reg region */
 	dev->base_addr = (unsigned long) priv->gfargrp[0].regs;
 
@@ -1209,8 +1263,7 @@ static int gfar_probe(struct platform_device *ofdev)
 	if (priv->num_tx_queues == 1)
 		priv->prio_sched_en = 1;
 
-	/* Carrier starts down, phylib will bring it up */
-	netif_carrier_off(dev);
+	gfar_hw_init(priv);
 
 	err = register_netdev(dev);
 
@@ -1219,6 +1272,9 @@ static int gfar_probe(struct platform_device *ofdev)
 		goto register_fail;
 	}
 
+	/* Carrier starts down, phylib will bring it up */
+	netif_carrier_off(dev);
+
 	device_init_wakeup(&dev->dev,
 			   priv->device_flags &
 			   FSL_GIANFAR_DEV_HAS_MAGIC_PACKET);
@@ -1401,9 +1457,10 @@ static int gfar_restore(struct device *dev)
 		return -ENOMEM;
 	}
 
-	init_registers(ndev);
-	gfar_set_mac_address(ndev);
-	gfar_init_mac(ndev);
+	gfar_mac_reset(priv);
+
+	gfar_init_tx_rx_base(priv);
+
 	gfar_start(priv);
 
 	priv->oldlink = 0;
@@ -1562,48 +1619,6 @@ static void gfar_configure_serdes(struct net_device *dev)
 		  BMCR_SPEED1000);
 }
 
-static void init_registers(struct net_device *dev)
-{
-	struct gfar_private *priv = netdev_priv(dev);
-	struct gfar __iomem *regs = priv->gfargrp[0].regs;
-
-	gfar_ints_disable(priv);
-
-	/* Init hash registers to zero */
-	gfar_write(&regs->igaddr0, 0);
-	gfar_write(&regs->igaddr1, 0);
-	gfar_write(&regs->igaddr2, 0);
-	gfar_write(&regs->igaddr3, 0);
-	gfar_write(&regs->igaddr4, 0);
-	gfar_write(&regs->igaddr5, 0);
-	gfar_write(&regs->igaddr6, 0);
-	gfar_write(&regs->igaddr7, 0);
-
-	gfar_write(&regs->gaddr0, 0);
-	gfar_write(&regs->gaddr1, 0);
-	gfar_write(&regs->gaddr2, 0);
-	gfar_write(&regs->gaddr3, 0);
-	gfar_write(&regs->gaddr4, 0);
-	gfar_write(&regs->gaddr5, 0);
-	gfar_write(&regs->gaddr6, 0);
-	gfar_write(&regs->gaddr7, 0);
-
-	/* Zero out the rmon mib registers if it has them */
-	if (priv->device_flags & FSL_GIANFAR_DEV_HAS_RMON) {
-		memset_io(&(regs->rmon), 0, sizeof (struct rmon_mib));
-
-		/* Mask off the CAM interrupts */
-		gfar_write(&regs->rmon.cam1, 0xffffffff);
-		gfar_write(&regs->rmon.cam2, 0xffffffff);
-	}
-
-	/* Initialize the max receive buffer length */
-	gfar_write(&regs->mrblr, priv->rx_buffer_size);
-
-	/* Initialize the Minimum Frame Length Register */
-	gfar_write(&regs->minflr, MINFLR_INIT_SETTINGS);
-}
-
 static int __gfar_is_rx_idle(struct gfar_private *priv)
 {
 	u32 res;
@@ -1939,13 +1954,13 @@ int startup_gfar(struct net_device *ndev)
 	struct gfar_private *priv = netdev_priv(ndev);
 	int err, i, j;
 
-	gfar_ints_disable(priv);
+	gfar_mac_reset(priv);
 
 	err = gfar_alloc_skb_resources(ndev);
 	if (err)
 		return err;
 
-	gfar_init_mac(ndev);
+	gfar_init_tx_rx_base(priv);
 
 	for (i = 0; i < priv->num_grps; i++) {
 		err = register_grp_irqs(&priv->gfargrp[i]);
@@ -1961,8 +1976,6 @@ int startup_gfar(struct net_device *ndev)
 
 	phy_start(priv->phydev);
 
-	gfar_configure_coalescing_all(priv);
-
 	return 0;
 
 irq_fail:
@@ -1980,11 +1993,6 @@ static int gfar_enet_open(struct net_device *dev)
 
 	enable_napi(priv);
 
-	/* Initialize a bunch of registers */
-	init_registers(dev);
-
-	gfar_set_mac_address(dev);
-
 	err = init_phy(dev);
 
 	if (err) {
-- 
cgit v1.2.2


From 88302648be8c45af09694363be1b165680489137 Mon Sep 17 00:00:00 2001
From: Claudiu Manoil <claudiu.manoil@freescale.com>
Date: Mon, 24 Feb 2014 12:13:43 +0200
Subject: gianfar: Fix on-the-fly vlan and mtu updates

The RCTRL and TCTRL registers should not be changed
on-the-fly, while the controller is running, otherwise
unexpected behaviour occurs.  But that's exactly what
gfar_vlan_mode() does, updating the VLAN acceleration
bits inside RCTRL/TCTRL.  The attempt to lock these
operations doesn't help, but only adds to the confusion.
There's also a dependency for Rx FCB insertion (activating
/de-activating the TOE offload block on Rx) which might
change the required rx buffer size.  This makes matters
worse as gfar_vlan_mode() ends up calling gfar_change_mtu(),
though the MTU size remains the same.  Note that there are
other situations that may affect the required rx buffer size,
like changing RXCSUM or rx hw timestamping, but errorneously
the rx buffer size is not recomputed/ updated in the process.

To fix this, do the vlan updates properly inside the MAC
reset and reconfiguration procedure, which takes care of
the rx buffer size dependecy and the rx TOE block (PRSDEP)
activation/deactivation as well (in the correct order).
As a consequence, MTU/ rx buff size updates are done now
by the same MAC reset and reconfig procedure, so that out
of context updates to MAXFRM, MRBLR, and MACCFG inside
change_mtu() are no longer needed.  The rx buffer size
dependecy to Rx FCB is now handled for the other cases too
(RXCSUM and rx hw timestamping).

Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/freescale/gianfar.c         | 165 +++++++----------------
 drivers/net/ethernet/freescale/gianfar.h         |   2 -
 drivers/net/ethernet/freescale/gianfar_ethtool.c |  11 +-
 3 files changed, 51 insertions(+), 127 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index 446e9c99379d..728078fe400e 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -329,14 +329,35 @@ static void gfar_init_tx_rx_base(struct gfar_private *priv)
 	}
 }
 
-static void gfar_mac_rx_config(struct gfar_private *priv)
+static void gfar_rx_buff_size_config(struct gfar_private *priv)
 {
-	struct gfar __iomem *regs = priv->gfargrp[0].regs;
-	u32 rctrl = 0;
+	int frame_size = priv->ndev->mtu + ETH_HLEN;
 
 	/* set this when rx hw offload (TOE) functions are being used */
 	priv->uses_rxfcb = 0;
 
+	if (priv->ndev->features & (NETIF_F_RXCSUM | NETIF_F_HW_VLAN_CTAG_RX))
+		priv->uses_rxfcb = 1;
+
+	if (priv->hwts_rx_en)
+		priv->uses_rxfcb = 1;
+
+	if (priv->uses_rxfcb)
+		frame_size += GMAC_FCB_LEN;
+
+	frame_size += priv->padding;
+
+	frame_size = (frame_size & ~(INCREMENTAL_BUFFER_SIZE - 1)) +
+		     INCREMENTAL_BUFFER_SIZE;
+
+	priv->rx_buffer_size = frame_size;
+}
+
+static void gfar_mac_rx_config(struct gfar_private *priv)
+{
+	struct gfar __iomem *regs = priv->gfargrp[0].regs;
+	u32 rctrl = 0;
+
 	if (priv->rx_filer_enable) {
 		rctrl |= RCTRL_FILREN;
 		/* Program the RIR0 reg with the required distribution */
@@ -347,15 +368,11 @@ static void gfar_mac_rx_config(struct gfar_private *priv)
 	if (priv->ndev->flags & IFF_PROMISC)
 		rctrl |= RCTRL_PROM;
 
-	if (priv->ndev->features & NETIF_F_RXCSUM) {
+	if (priv->ndev->features & NETIF_F_RXCSUM)
 		rctrl |= RCTRL_CHECKSUMMING;
-		priv->uses_rxfcb = 1;
-	}
 
-	if (priv->extended_hash) {
-		rctrl |= RCTRL_EXTHASH;
-		rctrl |= RCTRL_EMEN;
-	}
+	if (priv->extended_hash)
+		rctrl |= RCTRL_EXTHASH | RCTRL_EMEN;
 
 	if (priv->padding) {
 		rctrl &= ~RCTRL_PAL_MASK;
@@ -363,15 +380,11 @@ static void gfar_mac_rx_config(struct gfar_private *priv)
 	}
 
 	/* Enable HW time stamping if requested from user space */
-	if (priv->hwts_rx_en) {
+	if (priv->hwts_rx_en)
 		rctrl |= RCTRL_PRSDEP_INIT | RCTRL_TS_ENABLE;
-		priv->uses_rxfcb = 1;
-	}
 
-	if (priv->ndev->features & NETIF_F_HW_VLAN_CTAG_RX) {
+	if (priv->ndev->features & NETIF_F_HW_VLAN_CTAG_RX)
 		rctrl |= RCTRL_VLEX | RCTRL_PRSDEP_INIT;
-		priv->uses_rxfcb = 1;
-	}
 
 	/* Init rctrl based on our settings */
 	gfar_write(&regs->rctrl, rctrl);
@@ -393,6 +406,9 @@ static void gfar_mac_tx_config(struct gfar_private *priv)
 		gfar_write(&regs->tr47wt, DEFAULT_WRRS_WEIGHT);
 	}
 
+	if (priv->ndev->features & NETIF_F_HW_VLAN_CTAG_TX)
+		tctrl |= TCTRL_VLINS;
+
 	gfar_write(&regs->tctrl, tctrl);
 }
 
@@ -1029,7 +1045,11 @@ static void gfar_mac_reset(struct gfar_private *priv)
 
 	udelay(3);
 
-	/* Initialize the max receive buffer length */
+	/* Compute rx_buff_size based on config flags */
+	gfar_rx_buff_size_config(priv);
+
+	/* Initialize the max receive frame/buffer lengths */
+	gfar_write(&regs->maxfrm, priv->rx_buffer_size);
 	gfar_write(&regs->mrblr, priv->rx_buffer_size);
 
 	/* Initialize the Minimum Frame Length Register */
@@ -1037,8 +1057,15 @@ static void gfar_mac_reset(struct gfar_private *priv)
 
 	/* Initialize MACCFG2. */
 	tempval = MACCFG2_INIT_SETTINGS;
-	if (gfar_has_errata(priv, GFAR_ERRATA_74))
+
+	/* If the mtu is larger than the max size for standard
+	 * ethernet frames (ie, a jumbo frame), then set maccfg2
+	 * to allow huge frames, and to check the length
+	 */
+	if (priv->rx_buffer_size > DEFAULT_RX_BUFFER_SIZE ||
+	    gfar_has_errata(priv, GFAR_ERRATA_74))
 		tempval |= MACCFG2_HUGEFRAME | MACCFG2_LENGTHCHECK;
+
 	gfar_write(&regs->maccfg2, tempval);
 
 	/* Clear mac addr hash registers */
@@ -2353,77 +2380,9 @@ static int gfar_set_mac_address(struct net_device *dev)
 	return 0;
 }
 
-/* Check if rx parser should be activated */
-void gfar_check_rx_parser_mode(struct gfar_private *priv)
-{
-	struct gfar __iomem *regs;
-	u32 tempval;
-
-	regs = priv->gfargrp[0].regs;
-
-	tempval = gfar_read(&regs->rctrl);
-	/* If parse is no longer required, then disable parser */
-	if (tempval & RCTRL_REQ_PARSER) {
-		tempval |= RCTRL_PRSDEP_INIT;
-		priv->uses_rxfcb = 1;
-	} else {
-		tempval &= ~RCTRL_PRSDEP_INIT;
-		priv->uses_rxfcb = 0;
-	}
-	gfar_write(&regs->rctrl, tempval);
-}
-
-/* Enables and disables VLAN insertion/extraction */
-void gfar_vlan_mode(struct net_device *dev, netdev_features_t features)
-{
-	struct gfar_private *priv = netdev_priv(dev);
-	struct gfar __iomem *regs = NULL;
-	unsigned long flags;
-	u32 tempval;
-
-	regs = priv->gfargrp[0].regs;
-	local_irq_save(flags);
-	lock_rx_qs(priv);
-
-	if (features & NETIF_F_HW_VLAN_CTAG_TX) {
-		/* Enable VLAN tag insertion */
-		tempval = gfar_read(&regs->tctrl);
-		tempval |= TCTRL_VLINS;
-		gfar_write(&regs->tctrl, tempval);
-	} else {
-		/* Disable VLAN tag insertion */
-		tempval = gfar_read(&regs->tctrl);
-		tempval &= ~TCTRL_VLINS;
-		gfar_write(&regs->tctrl, tempval);
-	}
-
-	if (features & NETIF_F_HW_VLAN_CTAG_RX) {
-		/* Enable VLAN tag extraction */
-		tempval = gfar_read(&regs->rctrl);
-		tempval |= (RCTRL_VLEX | RCTRL_PRSDEP_INIT);
-		gfar_write(&regs->rctrl, tempval);
-		priv->uses_rxfcb = 1;
-	} else {
-		/* Disable VLAN tag extraction */
-		tempval = gfar_read(&regs->rctrl);
-		tempval &= ~RCTRL_VLEX;
-		gfar_write(&regs->rctrl, tempval);
-
-		gfar_check_rx_parser_mode(priv);
-	}
-
-	gfar_change_mtu(dev, dev->mtu);
-
-	unlock_rx_qs(priv);
-	local_irq_restore(flags);
-}
-
 static int gfar_change_mtu(struct net_device *dev, int new_mtu)
 {
-	int tempsize, tempval;
 	struct gfar_private *priv = netdev_priv(dev);
-	struct gfar __iomem *regs = priv->gfargrp[0].regs;
-	int oldsize = priv->rx_buffer_size;
 	int frame_size = new_mtu + ETH_HLEN;
 
 	if ((frame_size < 64) || (frame_size > JUMBO_FRAME_SIZE)) {
@@ -2431,42 +2390,12 @@ static int gfar_change_mtu(struct net_device *dev, int new_mtu)
 		return -EINVAL;
 	}
 
-	if (priv->uses_rxfcb)
-		frame_size += GMAC_FCB_LEN;
-
-	frame_size += priv->padding;
-
-	tempsize = (frame_size & ~(INCREMENTAL_BUFFER_SIZE - 1)) +
-		   INCREMENTAL_BUFFER_SIZE;
-
-	/* Only stop and start the controller if it isn't already
-	 * stopped, and we changed something
-	 */
-	if ((oldsize != tempsize) && (dev->flags & IFF_UP))
+	if (dev->flags & IFF_UP)
 		stop_gfar(dev);
 
-	priv->rx_buffer_size = tempsize;
-
 	dev->mtu = new_mtu;
 
-	gfar_write(&regs->mrblr, priv->rx_buffer_size);
-	gfar_write(&regs->maxfrm, priv->rx_buffer_size);
-
-	/* If the mtu is larger than the max size for standard
-	 * ethernet frames (ie, a jumbo frame), then set maccfg2
-	 * to allow huge frames, and to check the length
-	 */
-	tempval = gfar_read(&regs->maccfg2);
-
-	if (priv->rx_buffer_size > DEFAULT_RX_BUFFER_SIZE ||
-	    gfar_has_errata(priv, GFAR_ERRATA_74))
-		tempval |= (MACCFG2_HUGEFRAME | MACCFG2_LENGTHCHECK);
-	else
-		tempval &= ~(MACCFG2_HUGEFRAME | MACCFG2_LENGTHCHECK);
-
-	gfar_write(&regs->maccfg2, tempval);
-
-	if ((oldsize != tempsize) && (dev->flags & IFF_UP))
+	if (dev->flags & IFF_UP)
 		startup_gfar(dev);
 
 	return 0;
diff --git a/drivers/net/ethernet/freescale/gianfar.h b/drivers/net/ethernet/freescale/gianfar.h
index 2a59398f8cf0..9db95563f8aa 100644
--- a/drivers/net/ethernet/freescale/gianfar.h
+++ b/drivers/net/ethernet/freescale/gianfar.h
@@ -1211,8 +1211,6 @@ void gfar_phy_test(struct mii_bus *bus, struct phy_device *phydev, int enable,
 		   u32 regnum, u32 read);
 void gfar_configure_coalescing_all(struct gfar_private *priv);
 int gfar_set_features(struct net_device *dev, netdev_features_t features);
-void gfar_check_rx_parser_mode(struct gfar_private *priv);
-void gfar_vlan_mode(struct net_device *dev, netdev_features_t features);
 
 extern const struct ethtool_ops gfar_ethtool_ops;
 
diff --git a/drivers/net/ethernet/freescale/gianfar_ethtool.c b/drivers/net/ethernet/freescale/gianfar_ethtool.c
index 19557ec31f33..dd7ccec506f1 100644
--- a/drivers/net/ethernet/freescale/gianfar_ethtool.c
+++ b/drivers/net/ethernet/freescale/gianfar_ethtool.c
@@ -582,18 +582,15 @@ int gfar_set_features(struct net_device *dev, netdev_features_t features)
 	netdev_features_t changed = dev->features ^ features;
 	int err = 0;
 
-	if (changed & (NETIF_F_HW_VLAN_CTAG_TX|NETIF_F_HW_VLAN_CTAG_RX))
-		gfar_vlan_mode(dev, features);
-
-	if (!(changed & NETIF_F_RXCSUM))
+	if (!(changed & (NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX |
+			 NETIF_F_RXCSUM)))
 		return 0;
 
+	dev->features = features;
+
 	if (dev->flags & IFF_UP) {
 		/* Now we take down the rings to rebuild them */
 		stop_gfar(dev);
-
-		dev->features = features;
-
 		err = startup_gfar(dev);
 		netif_tx_wake_all_queues(dev);
 	}
-- 
cgit v1.2.2


From 80ec396cb6b522b23c69dfff32a2d12993e4bb30 Mon Sep 17 00:00:00 2001
From: Claudiu Manoil <claudiu.manoil@freescale.com>
Date: Mon, 24 Feb 2014 12:13:44 +0200
Subject: gianfar: Don't free/request irqs on device reset

Resetting the device (stop_gfar()/startup_gfar()) should
be fast and to the point, in order to timely recover
from an error condition (like Tx timeout) or during
device reconfig.  The irq free/ request routines are just
redundant here, and they should be part of the device
close/ open routines instead.

Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/freescale/gianfar.c | 77 +++++++++++++++++++-------------
 1 file changed, 45 insertions(+), 32 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index 728078fe400e..6c054b549fa1 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -1715,18 +1715,10 @@ void gfar_halt(struct gfar_private *priv)
 	gfar_write(&regs->maccfg1, tempval);
 }
 
-static void free_grp_irqs(struct gfar_priv_grp *grp)
-{
-	free_irq(gfar_irq(grp, TX)->irq, grp);
-	free_irq(gfar_irq(grp, RX)->irq, grp);
-	free_irq(gfar_irq(grp, ER)->irq, grp);
-}
-
 void stop_gfar(struct net_device *dev)
 {
 	struct gfar_private *priv = netdev_priv(dev);
 	unsigned long flags;
-	int i;
 
 	phy_stop(priv->phydev);
 
@@ -1742,16 +1734,6 @@ void stop_gfar(struct net_device *dev)
 	unlock_tx_qs(priv);
 	local_irq_restore(flags);
 
-	/* Free the IRQs */
-	if (priv->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) {
-		for (i = 0; i < priv->num_grps; i++)
-			free_grp_irqs(&priv->gfargrp[i]);
-	} else {
-		for (i = 0; i < priv->num_grps; i++)
-			free_irq(gfar_irq(&priv->gfargrp[i], TX)->irq,
-				 &priv->gfargrp[i]);
-	}
-
 	free_skb_resources(priv);
 }
 
@@ -1919,6 +1901,13 @@ void gfar_configure_coalescing_all(struct gfar_private *priv)
 	gfar_configure_coalescing(priv, 0xFF, 0xFF);
 }
 
+static void free_grp_irqs(struct gfar_priv_grp *grp)
+{
+	free_irq(gfar_irq(grp, TX)->irq, grp);
+	free_irq(gfar_irq(grp, RX)->irq, grp);
+	free_irq(gfar_irq(grp, ER)->irq, grp);
+}
+
 static int register_grp_irqs(struct gfar_priv_grp *grp)
 {
 	struct gfar_private *priv = grp->priv;
@@ -1975,11 +1964,42 @@ err_irq_fail:
 
 }
 
+static void gfar_free_irq(struct gfar_private *priv)
+{
+	int i;
+
+	/* Free the IRQs */
+	if (priv->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) {
+		for (i = 0; i < priv->num_grps; i++)
+			free_grp_irqs(&priv->gfargrp[i]);
+	} else {
+		for (i = 0; i < priv->num_grps; i++)
+			free_irq(gfar_irq(&priv->gfargrp[i], TX)->irq,
+				 &priv->gfargrp[i]);
+	}
+}
+
+static int gfar_request_irq(struct gfar_private *priv)
+{
+	int err, i, j;
+
+	for (i = 0; i < priv->num_grps; i++) {
+		err = register_grp_irqs(&priv->gfargrp[i]);
+		if (err) {
+			for (j = 0; j < i; j++)
+				free_grp_irqs(&priv->gfargrp[j]);
+			return err;
+		}
+	}
+
+	return 0;
+}
+
 /* Bring the controller up and running */
 int startup_gfar(struct net_device *ndev)
 {
 	struct gfar_private *priv = netdev_priv(ndev);
-	int err, i, j;
+	int err;
 
 	gfar_mac_reset(priv);
 
@@ -1989,25 +2009,12 @@ int startup_gfar(struct net_device *ndev)
 
 	gfar_init_tx_rx_base(priv);
 
-	for (i = 0; i < priv->num_grps; i++) {
-		err = register_grp_irqs(&priv->gfargrp[i]);
-		if (err) {
-			for (j = 0; j < i; j++)
-				free_grp_irqs(&priv->gfargrp[j]);
-			goto irq_fail;
-		}
-	}
-
 	/* Start the controller */
 	gfar_start(priv);
 
 	phy_start(priv->phydev);
 
 	return 0;
-
-irq_fail:
-	free_skb_resources(priv);
-	return err;
 }
 
 /* Called when something needs to use the ethernet device
@@ -2027,6 +2034,10 @@ static int gfar_enet_open(struct net_device *dev)
 		return err;
 	}
 
+	err = gfar_request_irq(priv);
+	if (err)
+		return err;
+
 	err = startup_gfar(dev);
 	if (err) {
 		disable_napi(priv);
@@ -2369,6 +2380,8 @@ static int gfar_close(struct net_device *dev)
 
 	netif_tx_stop_all_queues(dev);
 
+	gfar_free_irq(priv);
+
 	return 0;
 }
 
-- 
cgit v1.2.2


From 0851133bb5ad9d95fceccac9fc67b798041b73e2 Mon Sep 17 00:00:00 2001
From: Claudiu Manoil <claudiu.manoil@freescale.com>
Date: Mon, 24 Feb 2014 12:13:45 +0200
Subject: gianfar: Fix device reset races (oops) for Tx

The device reset procedure, stop_gfar()/startup_gfar(), has
concurrency issues.
"Kernel access of bad area" oopses show up during Tx timeout
device reset or other reset cases (like changing MTU) that
happen while the interface still has traffic. The oopses
happen in start_xmit and clean_tx_ring when accessing tx_queue->
tx_skbuff which is NULL. The race comes from de-allocating the
tx_skbuff while transmission and napi processing are still
active. Though the Tx queues get temoprarily stopped when Tx
timeout occurs, they get re-enabled as a result of Tx congestion
handling inside the napi context (see clean_tx_ring()). Not
disabling the napi during reset is also a bug, because
clean_tx_ring() will try to access tx_skbuff while it is being
de-alloc'ed and re-alloc'ed.

To fix this, stop_gfar() needs to disable napi processing
after stopping the Tx queues. However, in order to prevent
clean_tx_ring() to re-enable the Tx queue before the napi
gets disabled, the device state DOWN has been introduced.
It prevents the Tx congestion management from re-enabling the
de-congested Tx queue while the device is brought down.
An additional locking state, RESETTING, has been introduced
to prevent simultaneous resets or to prevent configuring the
device while it is resetting.
The bogus 'rxlock's (for each Rx queue) have been removed since
their purpose is not justified, as they don't prevent nor are
suited to prevent device reset/reconfig races (such as this one).

Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/freescale/gianfar.c         | 116 ++++++++++-------------
 drivers/net/ethernet/freescale/gianfar.h         |  16 ++--
 drivers/net/ethernet/freescale/gianfar_ethtool.c |  28 ++++--
 3 files changed, 76 insertions(+), 84 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index 6c054b549fa1..4eac25f66605 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -480,14 +480,6 @@ static void gfar_ints_enable(struct gfar_private *priv)
 	}
 }
 
-void lock_rx_qs(struct gfar_private *priv)
-{
-	int i;
-
-	for (i = 0; i < priv->num_rx_queues; i++)
-		spin_lock(&priv->rx_queue[i]->rxlock);
-}
-
 void lock_tx_qs(struct gfar_private *priv)
 {
 	int i;
@@ -496,14 +488,6 @@ void lock_tx_qs(struct gfar_private *priv)
 		spin_lock(&priv->tx_queue[i]->txlock);
 }
 
-void unlock_rx_qs(struct gfar_private *priv)
-{
-	int i;
-
-	for (i = 0; i < priv->num_rx_queues; i++)
-		spin_unlock(&priv->rx_queue[i]->rxlock);
-}
-
 void unlock_tx_qs(struct gfar_private *priv)
 {
 	int i;
@@ -543,7 +527,6 @@ static int gfar_alloc_rx_queues(struct gfar_private *priv)
 		priv->rx_queue[i]->rx_skbuff = NULL;
 		priv->rx_queue[i]->qindex = i;
 		priv->rx_queue[i]->dev = priv->ndev;
-		spin_lock_init(&(priv->rx_queue[i]->rxlock));
 	}
 	return 0;
 }
@@ -857,18 +840,16 @@ static int gfar_hwtstamp_set(struct net_device *netdev, struct ifreq *ifr)
 	switch (config.rx_filter) {
 	case HWTSTAMP_FILTER_NONE:
 		if (priv->hwts_rx_en) {
-			stop_gfar(netdev);
 			priv->hwts_rx_en = 0;
-			startup_gfar(netdev);
+			reset_gfar(netdev);
 		}
 		break;
 	default:
 		if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_TIMER))
 			return -ERANGE;
 		if (!priv->hwts_rx_en) {
-			stop_gfar(netdev);
 			priv->hwts_rx_en = 1;
-			startup_gfar(netdev);
+			reset_gfar(netdev);
 		}
 		config.rx_filter = HWTSTAMP_FILTER_ALL;
 		break;
@@ -1027,7 +1008,7 @@ static void gfar_detect_errata(struct gfar_private *priv)
 			 priv->errata);
 }
 
-static void gfar_mac_reset(struct gfar_private *priv)
+void gfar_mac_reset(struct gfar_private *priv)
 {
 	struct gfar __iomem *regs = priv->gfargrp[0].regs;
 	u32 tempval;
@@ -1290,6 +1271,8 @@ static int gfar_probe(struct platform_device *ofdev)
 	if (priv->num_tx_queues == 1)
 		priv->prio_sched_en = 1;
 
+	set_bit(GFAR_DOWN, &priv->state);
+
 	gfar_hw_init(priv);
 
 	err = register_netdev(dev);
@@ -1389,7 +1372,6 @@ static int gfar_suspend(struct device *dev)
 
 		local_irq_save(flags);
 		lock_tx_qs(priv);
-		lock_rx_qs(priv);
 
 		gfar_halt_nodisable(priv);
 
@@ -1403,7 +1385,6 @@ static int gfar_suspend(struct device *dev)
 
 		gfar_write(&regs->maccfg1, tempval);
 
-		unlock_rx_qs(priv);
 		unlock_tx_qs(priv);
 		local_irq_restore(flags);
 
@@ -1449,7 +1430,6 @@ static int gfar_resume(struct device *dev)
 	 */
 	local_irq_save(flags);
 	lock_tx_qs(priv);
-	lock_rx_qs(priv);
 
 	tempval = gfar_read(&regs->maccfg2);
 	tempval &= ~MACCFG2_MPEN;
@@ -1457,7 +1437,6 @@ static int gfar_resume(struct device *dev)
 
 	gfar_start(priv);
 
-	unlock_rx_qs(priv);
 	unlock_tx_qs(priv);
 	local_irq_restore(flags);
 
@@ -1718,21 +1697,19 @@ void gfar_halt(struct gfar_private *priv)
 void stop_gfar(struct net_device *dev)
 {
 	struct gfar_private *priv = netdev_priv(dev);
-	unsigned long flags;
 
-	phy_stop(priv->phydev);
+	netif_tx_stop_all_queues(dev);
 
+	smp_mb__before_clear_bit();
+	set_bit(GFAR_DOWN, &priv->state);
+	smp_mb__after_clear_bit();
 
-	/* Lock it down */
-	local_irq_save(flags);
-	lock_tx_qs(priv);
-	lock_rx_qs(priv);
+	disable_napi(priv);
 
+	/* disable ints and gracefully shut down Rx/Tx DMA */
 	gfar_halt(priv);
 
-	unlock_rx_qs(priv);
-	unlock_tx_qs(priv);
-	local_irq_restore(flags);
+	phy_stop(priv->phydev);
 
 	free_skb_resources(priv);
 }
@@ -2009,11 +1986,19 @@ int startup_gfar(struct net_device *ndev)
 
 	gfar_init_tx_rx_base(priv);
 
-	/* Start the controller */
+	smp_mb__before_clear_bit();
+	clear_bit(GFAR_DOWN, &priv->state);
+	smp_mb__after_clear_bit();
+
+	/* Start Rx/Tx DMA and enable the interrupts */
 	gfar_start(priv);
 
 	phy_start(priv->phydev);
 
+	enable_napi(priv);
+
+	netif_tx_wake_all_queues(ndev);
+
 	return 0;
 }
 
@@ -2025,26 +2010,17 @@ static int gfar_enet_open(struct net_device *dev)
 	struct gfar_private *priv = netdev_priv(dev);
 	int err;
 
-	enable_napi(priv);
-
 	err = init_phy(dev);
-
-	if (err) {
-		disable_napi(priv);
+	if (err)
 		return err;
-	}
 
 	err = gfar_request_irq(priv);
 	if (err)
 		return err;
 
 	err = startup_gfar(dev);
-	if (err) {
-		disable_napi(priv);
+	if (err)
 		return err;
-	}
-
-	netif_tx_start_all_queues(dev);
 
 	device_set_wakeup_enable(&dev->dev, priv->wol_en);
 
@@ -2369,8 +2345,6 @@ static int gfar_close(struct net_device *dev)
 {
 	struct gfar_private *priv = netdev_priv(dev);
 
-	disable_napi(priv);
-
 	cancel_work_sync(&priv->reset_task);
 	stop_gfar(dev);
 
@@ -2378,8 +2352,6 @@ static int gfar_close(struct net_device *dev)
 	phy_disconnect(priv->phydev);
 	priv->phydev = NULL;
 
-	netif_tx_stop_all_queues(dev);
-
 	gfar_free_irq(priv);
 
 	return 0;
@@ -2403,6 +2375,9 @@ static int gfar_change_mtu(struct net_device *dev, int new_mtu)
 		return -EINVAL;
 	}
 
+	while (test_and_set_bit_lock(GFAR_RESETTING, &priv->state))
+		cpu_relax();
+
 	if (dev->flags & IFF_UP)
 		stop_gfar(dev);
 
@@ -2411,9 +2386,24 @@ static int gfar_change_mtu(struct net_device *dev, int new_mtu)
 	if (dev->flags & IFF_UP)
 		startup_gfar(dev);
 
+	clear_bit_unlock(GFAR_RESETTING, &priv->state);
+
 	return 0;
 }
 
+void reset_gfar(struct net_device *ndev)
+{
+	struct gfar_private *priv = netdev_priv(ndev);
+
+	while (test_and_set_bit_lock(GFAR_RESETTING, &priv->state))
+		cpu_relax();
+
+	stop_gfar(ndev);
+	startup_gfar(ndev);
+
+	clear_bit_unlock(GFAR_RESETTING, &priv->state);
+}
+
 /* gfar_reset_task gets scheduled when a packet has not been
  * transmitted after a set amount of time.
  * For now, assume that clearing out all the structures, and
@@ -2423,16 +2413,7 @@ static void gfar_reset_task(struct work_struct *work)
 {
 	struct gfar_private *priv = container_of(work, struct gfar_private,
 						 reset_task);
-	struct net_device *dev = priv->ndev;
-
-	if (dev->flags & IFF_UP) {
-		netif_tx_stop_all_queues(dev);
-		stop_gfar(dev);
-		startup_gfar(dev);
-		netif_tx_start_all_queues(dev);
-	}
-
-	netif_tx_schedule_all(dev);
+	reset_gfar(priv->ndev);
 }
 
 static void gfar_timeout(struct net_device *dev)
@@ -2545,8 +2526,10 @@ static void gfar_clean_tx_ring(struct gfar_priv_tx_q *tx_queue)
 	}
 
 	/* If we freed a buffer, we can restart transmission, if necessary */
-	if (netif_tx_queue_stopped(txq) && tx_queue->num_txbdfree)
-		netif_wake_subqueue(dev, tqi);
+	if (tx_queue->num_txbdfree &&
+	    netif_tx_queue_stopped(txq) &&
+	    !(test_bit(GFAR_DOWN, &priv->state)))
+		netif_wake_subqueue(priv->ndev, tqi);
 
 	/* Update dirty indicators */
 	tx_queue->skb_dirtytx = skb_dirtytx;
@@ -3023,12 +3006,11 @@ static void adjust_link(struct net_device *dev)
 {
 	struct gfar_private *priv = netdev_priv(dev);
 	struct gfar __iomem *regs = priv->gfargrp[0].regs;
-	unsigned long flags;
 	struct phy_device *phydev = priv->phydev;
 	int new_state = 0;
 
-	local_irq_save(flags);
-	lock_tx_qs(priv);
+	if (test_bit(GFAR_RESETTING, &priv->state))
+		return;
 
 	if (phydev->link) {
 		u32 tempval1 = gfar_read(&regs->maccfg1);
@@ -3100,8 +3082,6 @@ static void adjust_link(struct net_device *dev)
 
 	if (new_state && netif_msg_link(priv))
 		phy_print_status(phydev);
-	unlock_tx_qs(priv);
-	local_irq_restore(flags);
 }
 
 /* Update the hash table based on the current list of multicast
diff --git a/drivers/net/ethernet/freescale/gianfar.h b/drivers/net/ethernet/freescale/gianfar.h
index 9db95563f8aa..1e16216d4150 100644
--- a/drivers/net/ethernet/freescale/gianfar.h
+++ b/drivers/net/ethernet/freescale/gianfar.h
@@ -965,7 +965,6 @@ struct rx_q_stats {
 
 /**
  *	struct gfar_priv_rx_q - per rx queue structure
- *	@rxlock: per queue rx spin lock
  *	@rx_skbuff: skb pointers
  *	@skb_currx: currently use skb pointer
  *	@rx_bd_base: First rx buffer descriptor
@@ -978,8 +977,7 @@ struct rx_q_stats {
  */
 
 struct gfar_priv_rx_q {
-	spinlock_t rxlock __attribute__ ((aligned (SMP_CACHE_BYTES)));
-	struct	sk_buff ** rx_skbuff;
+	struct	sk_buff **rx_skbuff __aligned(SMP_CACHE_BYTES);
 	dma_addr_t rx_bd_dma_base;
 	struct	rxbd8 *rx_bd_base;
 	struct	rxbd8 *cur_rx;
@@ -1040,6 +1038,11 @@ enum gfar_errata {
 	GFAR_ERRATA_12		= 0x08, /* a.k.a errata eTSEC49 */
 };
 
+enum gfar_dev_state {
+	GFAR_DOWN = 1,
+	GFAR_RESETTING
+};
+
 /* Struct stolen almost completely (and shamelessly) from the FCC enet source
  * (Ok, that's not so true anymore, but there is a family resemblance)
  * The GFAR buffer descriptors track the ring buffers.  The rx_bd_base
@@ -1068,6 +1071,7 @@ struct gfar_private {
 	struct gfar_priv_rx_q *rx_queue[MAX_RX_QS];
 	struct gfar_priv_grp gfargrp[MAXGROUPS];
 
+	unsigned long state;
 	u32 device_flags;
 
 	unsigned int mode;
@@ -1198,13 +1202,11 @@ static inline void gfar_write_isrg(struct gfar_private *priv)
 	}
 }
 
-void lock_rx_qs(struct gfar_private *priv);
-void lock_tx_qs(struct gfar_private *priv);
-void unlock_rx_qs(struct gfar_private *priv);
-void unlock_tx_qs(struct gfar_private *priv);
 irqreturn_t gfar_receive(int irq, void *dev_id);
 int startup_gfar(struct net_device *dev);
 void stop_gfar(struct net_device *dev);
+void reset_gfar(struct net_device *dev);
+void gfar_mac_reset(struct gfar_private *priv);
 void gfar_halt(struct gfar_private *priv);
 void gfar_start(struct gfar_private *priv);
 void gfar_phy_test(struct mii_bus *bus, struct phy_device *phydev, int enable,
diff --git a/drivers/net/ethernet/freescale/gianfar_ethtool.c b/drivers/net/ethernet/freescale/gianfar_ethtool.c
index dd7ccec506f1..45219d4d09b4 100644
--- a/drivers/net/ethernet/freescale/gianfar_ethtool.c
+++ b/drivers/net/ethernet/freescale/gianfar_ethtool.c
@@ -487,6 +487,9 @@ static int gfar_sringparam(struct net_device *dev,
 		return -EINVAL;
 	}
 
+	while (test_and_set_bit_lock(GFAR_RESETTING, &priv->state))
+		cpu_relax();
+
 	if (dev->flags & IFF_UP)
 		stop_gfar(dev);
 
@@ -498,10 +501,11 @@ static int gfar_sringparam(struct net_device *dev,
 		priv->tx_queue[i]->tx_ring_size = rvals->tx_pending;
 
 	/* Rebuild the rings with the new size */
-	if (dev->flags & IFF_UP) {
+	if (dev->flags & IFF_UP)
 		err = startup_gfar(dev);
-		netif_tx_wake_all_queues(dev);
-	}
+
+	clear_bit_unlock(GFAR_RESETTING, &priv->state);
+
 	return err;
 }
 
@@ -580,20 +584,28 @@ static int gfar_spauseparam(struct net_device *dev,
 int gfar_set_features(struct net_device *dev, netdev_features_t features)
 {
 	netdev_features_t changed = dev->features ^ features;
+	struct gfar_private *priv = netdev_priv(dev);
 	int err = 0;
 
 	if (!(changed & (NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX |
 			 NETIF_F_RXCSUM)))
 		return 0;
 
+	while (test_and_set_bit_lock(GFAR_RESETTING, &priv->state))
+		cpu_relax();
+
 	dev->features = features;
 
 	if (dev->flags & IFF_UP) {
 		/* Now we take down the rings to rebuild them */
 		stop_gfar(dev);
 		err = startup_gfar(dev);
-		netif_tx_wake_all_queues(dev);
+	} else {
+		gfar_mac_reset(priv);
 	}
+
+	clear_bit_unlock(GFAR_RESETTING, &priv->state);
+
 	return err;
 }
 
@@ -1559,9 +1571,6 @@ static int gfar_write_filer_table(struct gfar_private *priv,
 	if (tab->index > MAX_FILER_IDX - 1)
 		return -EBUSY;
 
-	/* Avoid inconsistent filer table to be processed */
-	lock_rx_qs(priv);
-
 	/* Fill regular entries */
 	for (; i < MAX_FILER_IDX - 1 && (tab->fe[i].ctrl | tab->fe[i].ctrl);
 	     i++)
@@ -1574,8 +1583,6 @@ static int gfar_write_filer_table(struct gfar_private *priv,
 	 */
 	gfar_write_filer(priv, i, 0x20, 0x0);
 
-	unlock_rx_qs(priv);
-
 	return 0;
 }
 
@@ -1780,6 +1787,9 @@ static int gfar_set_nfc(struct net_device *dev, struct ethtool_rxnfc *cmd)
 	struct gfar_private *priv = netdev_priv(dev);
 	int ret = 0;
 
+	if (test_bit(GFAR_RESETTING, &priv->state))
+		return -EBUSY;
+
 	mutex_lock(&priv->rx_queue_access);
 
 	switch (cmd->cmd) {
-- 
cgit v1.2.2


From f19015baa23b9130acbf290e1d65c70193e34ff1 Mon Sep 17 00:00:00 2001
From: Claudiu Manoil <claudiu.manoil@freescale.com>
Date: Mon, 24 Feb 2014 12:13:46 +0200
Subject: gianfar: Fix Tx int miss, dont write IC on-the-fly

Programming the interrupt coalescing (IC) registers while
the controller/DMA is on may incur the loss of one Tx
confirmation interrupt, under certain conditions.  This is
a subtle hw race because it does not occur during a burst
of Tx packets.  It has been observed on p2020 devices that,
if just one packet is being xmit'ed, the Tx confirmation
doesn't trigger and BQL evetually blocks the Tx queues,
followed by Tx timeout and an un-responsive device.
This issue was not apparent prior to introducing BQL
support, as a late Tx confirmation was not an issue back then
and the next burst of Tx frames would have triggered the
Tx confirmation/ Tx ring cleanup anyway.

Bottom line, the hw specifications state that the IC registers
should not be programmed while the Rx/Tx blocks (the DMA) are
enabled. Further more, these registers are currently re-written
with the same values on the processing path, over and over again.
To fix this, rewriting the IC registers has been removed from
the processing path (napi poll).  A complete MAC reset procedure
has been implemented for the ethtool -c option instead, to
reliably update these registers while the controller is stopped.

Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/freescale/gianfar.c         | 99 ++++++++++--------------
 drivers/net/ethernet/freescale/gianfar_ethtool.c | 66 +++++++++-------
 2 files changed, 77 insertions(+), 88 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index 4eac25f66605..c5b9320f7629 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -412,6 +412,47 @@ static void gfar_mac_tx_config(struct gfar_private *priv)
 	gfar_write(&regs->tctrl, tctrl);
 }
 
+static void gfar_configure_coalescing(struct gfar_private *priv,
+			       unsigned long tx_mask, unsigned long rx_mask)
+{
+	struct gfar __iomem *regs = priv->gfargrp[0].regs;
+	u32 __iomem *baddr;
+
+	if (priv->mode == MQ_MG_MODE) {
+		int i = 0;
+
+		baddr = &regs->txic0;
+		for_each_set_bit(i, &tx_mask, priv->num_tx_queues) {
+			gfar_write(baddr + i, 0);
+			if (likely(priv->tx_queue[i]->txcoalescing))
+				gfar_write(baddr + i, priv->tx_queue[i]->txic);
+		}
+
+		baddr = &regs->rxic0;
+		for_each_set_bit(i, &rx_mask, priv->num_rx_queues) {
+			gfar_write(baddr + i, 0);
+			if (likely(priv->rx_queue[i]->rxcoalescing))
+				gfar_write(baddr + i, priv->rx_queue[i]->rxic);
+		}
+	} else {
+		/* Backward compatible case -- even if we enable
+		 * multiple queues, there's only single reg to program
+		 */
+		gfar_write(&regs->txic, 0);
+		if (likely(priv->tx_queue[0]->txcoalescing))
+			gfar_write(&regs->txic, priv->tx_queue[0]->txic);
+
+		gfar_write(&regs->rxic, 0);
+		if (unlikely(priv->rx_queue[0]->rxcoalescing))
+			gfar_write(&regs->rxic, priv->rx_queue[0]->rxic);
+	}
+}
+
+void gfar_configure_coalescing_all(struct gfar_private *priv)
+{
+	gfar_configure_coalescing(priv, 0xFF, 0xFF);
+}
+
 static struct net_device_stats *gfar_get_stats(struct net_device *dev)
 {
 	struct gfar_private *priv = netdev_priv(dev);
@@ -1837,47 +1878,6 @@ void gfar_start(struct gfar_private *priv)
 	priv->ndev->trans_start = jiffies; /* prevent tx timeout */
 }
 
-static void gfar_configure_coalescing(struct gfar_private *priv,
-			       unsigned long tx_mask, unsigned long rx_mask)
-{
-	struct gfar __iomem *regs = priv->gfargrp[0].regs;
-	u32 __iomem *baddr;
-
-	if (priv->mode == MQ_MG_MODE) {
-		int i = 0;
-
-		baddr = &regs->txic0;
-		for_each_set_bit(i, &tx_mask, priv->num_tx_queues) {
-			gfar_write(baddr + i, 0);
-			if (likely(priv->tx_queue[i]->txcoalescing))
-				gfar_write(baddr + i, priv->tx_queue[i]->txic);
-		}
-
-		baddr = &regs->rxic0;
-		for_each_set_bit(i, &rx_mask, priv->num_rx_queues) {
-			gfar_write(baddr + i, 0);
-			if (likely(priv->rx_queue[i]->rxcoalescing))
-				gfar_write(baddr + i, priv->rx_queue[i]->rxic);
-		}
-	} else {
-		/* Backward compatible case -- even if we enable
-		 * multiple queues, there's only single reg to program
-		 */
-		gfar_write(&regs->txic, 0);
-		if (likely(priv->tx_queue[0]->txcoalescing))
-			gfar_write(&regs->txic, priv->tx_queue[0]->txic);
-
-		gfar_write(&regs->rxic, 0);
-		if (unlikely(priv->rx_queue[0]->rxcoalescing))
-			gfar_write(&regs->rxic, priv->rx_queue[0]->rxic);
-	}
-}
-
-void gfar_configure_coalescing_all(struct gfar_private *priv)
-{
-	gfar_configure_coalescing(priv, 0xFF, 0xFF);
-}
-
 static void free_grp_irqs(struct gfar_priv_grp *grp)
 {
 	free_irq(gfar_irq(grp, TX)->irq, grp);
@@ -2812,17 +2812,6 @@ static int gfar_poll_sq(struct napi_struct *napi, int budget)
 		gfar_write(&regs->rstat, gfargrp->rstat);
 
 		gfar_write(&regs->imask, IMASK_DEFAULT);
-
-		/* If we are coalescing interrupts, update the timer
-		 * Otherwise, clear it
-		 */
-		gfar_write(&regs->txic, 0);
-		if (likely(tx_queue->txcoalescing))
-			gfar_write(&regs->txic, tx_queue->txic);
-
-		gfar_write(&regs->rxic, 0);
-		if (unlikely(rx_queue->rxcoalescing))
-			gfar_write(&regs->rxic, rx_queue->rxic);
 	}
 
 	return work_done;
@@ -2892,12 +2881,6 @@ static int gfar_poll(struct napi_struct *napi, int budget)
 		gfar_write(&regs->rstat, gfargrp->rstat);
 
 		gfar_write(&regs->imask, IMASK_DEFAULT);
-
-		/* If we are coalescing interrupts, update the timer
-		 * Otherwise, clear it
-		 */
-		gfar_configure_coalescing(priv, gfargrp->rx_bit_map,
-					  gfargrp->tx_bit_map);
 	}
 
 	return work_done;
diff --git a/drivers/net/ethernet/freescale/gianfar_ethtool.c b/drivers/net/ethernet/freescale/gianfar_ethtool.c
index 45219d4d09b4..891dbee6e6c1 100644
--- a/drivers/net/ethernet/freescale/gianfar_ethtool.c
+++ b/drivers/net/ethernet/freescale/gianfar_ethtool.c
@@ -360,25 +360,11 @@ static int gfar_scoalesce(struct net_device *dev,
 			  struct ethtool_coalesce *cvals)
 {
 	struct gfar_private *priv = netdev_priv(dev);
-	int i = 0;
+	int i, err = 0;
 
 	if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_COALESCE))
 		return -EOPNOTSUPP;
 
-	/* Set up rx coalescing */
-	/* As of now, we will enable/disable coalescing for all
-	 * queues together in case of eTSEC2, this will be modified
-	 * along with the ethtool interface
-	 */
-	if ((cvals->rx_coalesce_usecs == 0) ||
-	    (cvals->rx_max_coalesced_frames == 0)) {
-		for (i = 0; i < priv->num_rx_queues; i++)
-			priv->rx_queue[i]->rxcoalescing = 0;
-	} else {
-		for (i = 0; i < priv->num_rx_queues; i++)
-			priv->rx_queue[i]->rxcoalescing = 1;
-	}
-
 	if (NULL == priv->phydev)
 		return -ENODEV;
 
@@ -395,6 +381,32 @@ static int gfar_scoalesce(struct net_device *dev,
 		return -EINVAL;
 	}
 
+	/* Check the bounds of the values */
+	if (cvals->tx_coalesce_usecs > GFAR_MAX_COAL_USECS) {
+		netdev_info(dev, "Coalescing is limited to %d microseconds\n",
+			    GFAR_MAX_COAL_USECS);
+		return -EINVAL;
+	}
+
+	if (cvals->tx_max_coalesced_frames > GFAR_MAX_COAL_FRAMES) {
+		netdev_info(dev, "Coalescing is limited to %d frames\n",
+			    GFAR_MAX_COAL_FRAMES);
+		return -EINVAL;
+	}
+
+	while (test_and_set_bit_lock(GFAR_RESETTING, &priv->state))
+		cpu_relax();
+
+	/* Set up rx coalescing */
+	if ((cvals->rx_coalesce_usecs == 0) ||
+	    (cvals->rx_max_coalesced_frames == 0)) {
+		for (i = 0; i < priv->num_rx_queues; i++)
+			priv->rx_queue[i]->rxcoalescing = 0;
+	} else {
+		for (i = 0; i < priv->num_rx_queues; i++)
+			priv->rx_queue[i]->rxcoalescing = 1;
+	}
+
 	for (i = 0; i < priv->num_rx_queues; i++) {
 		priv->rx_queue[i]->rxic = mk_ic_value(
 			cvals->rx_max_coalesced_frames,
@@ -411,28 +423,22 @@ static int gfar_scoalesce(struct net_device *dev,
 			priv->tx_queue[i]->txcoalescing = 1;
 	}
 
-	/* Check the bounds of the values */
-	if (cvals->tx_coalesce_usecs > GFAR_MAX_COAL_USECS) {
-		netdev_info(dev, "Coalescing is limited to %d microseconds\n",
-			    GFAR_MAX_COAL_USECS);
-		return -EINVAL;
-	}
-
-	if (cvals->tx_max_coalesced_frames > GFAR_MAX_COAL_FRAMES) {
-		netdev_info(dev, "Coalescing is limited to %d frames\n",
-			    GFAR_MAX_COAL_FRAMES);
-		return -EINVAL;
-	}
-
 	for (i = 0; i < priv->num_tx_queues; i++) {
 		priv->tx_queue[i]->txic = mk_ic_value(
 			cvals->tx_max_coalesced_frames,
 			gfar_usecs2ticks(priv, cvals->tx_coalesce_usecs));
 	}
 
-	gfar_configure_coalescing_all(priv);
+	if (dev->flags & IFF_UP) {
+		stop_gfar(dev);
+		err = startup_gfar(dev);
+	} else {
+		gfar_mac_reset(priv);
+	}
 
-	return 0;
+	clear_bit_unlock(GFAR_RESETTING, &priv->state);
+
+	return err;
 }
 
 /* Fills in rvals with the current ring parameters.  Currently,
-- 
cgit v1.2.2


From 80d8e96d127a91dc3f298e9bb959473b9df1063a Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Mon, 24 Feb 2014 16:56:11 -0800
Subject: net: bcmgenet: drop checks on priv->phydev

Drop all the checks on priv->phydev since we will refuse probing the
driver if we cannot attach to a PHY device. Drop all checks on
priv->phydev. This also fixes some smatch issues reported by Dan
Carpenter.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/genet/bcmgenet.c | 17 ++++++-----------
 1 file changed, 6 insertions(+), 11 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index 192069d2745e..585645749d6d 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -732,8 +732,7 @@ static void bcmgenet_power_down(struct bcmgenet_priv *priv,
 
 	switch (mode) {
 	case GENET_POWER_CABLE_SENSE:
-		if (priv->phydev)
-			phy_detach(priv->phydev);
+		phy_detach(priv->phydev);
 		break;
 
 	case GENET_POWER_PASSIVE:
@@ -1811,9 +1810,8 @@ static void bcmgenet_irq_task(struct work_struct *work)
 	/* Link UP/DOWN event */
 	if ((priv->hw_params->flags & GENET_HAS_MDIO_INTR) &&
 		(priv->irq0_stat & (UMAC_IRQ_LINK_UP|UMAC_IRQ_LINK_DOWN))) {
-		if (priv->phydev)
-			phy_mac_interrupt(priv->phydev,
-				(priv->irq0_stat & UMAC_IRQ_LINK_UP));
+		phy_mac_interrupt(priv->phydev,
+			priv->irq0_stat & UMAC_IRQ_LINK_UP);
 		priv->irq0_stat &= ~(UMAC_IRQ_LINK_UP|UMAC_IRQ_LINK_DOWN);
 	}
 }
@@ -1931,8 +1929,7 @@ static int bcmgenet_wol_resume(struct bcmgenet_priv *priv)
 	if (ret)
 		return ret;
 
-	if (priv->phydev)
-		phy_init_hw(priv->phydev);
+	phy_init_hw(priv->phydev);
 	/* Speed settings must be restored */
 	bcmgenet_mii_config(priv->dev);
 
@@ -2058,8 +2055,7 @@ static int bcmgenet_open(struct net_device *dev)
 
 	netif_tx_start_all_queues(dev);
 
-	if (priv->phydev)
-		phy_start(priv->phydev);
+	phy_start(priv->phydev);
 
 	return 0;
 
@@ -2134,8 +2130,7 @@ static int bcmgenet_close(struct net_device *dev)
 
 	netif_dbg(priv, ifdown, dev, "bcmgenet_close\n");
 
-	if (priv->phydev)
-		phy_stop(priv->phydev);
+	phy_stop(priv->phydev);
 
 	/* Disable MAC receive */
 	reg = bcmgenet_umac_readl(priv, UMAC_CMD);
-- 
cgit v1.2.2


From da56bbf71dedb8cabeb1db089c1bca5507c51945 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Mon, 24 Feb 2014 16:56:12 -0800
Subject: net: bcmgenet: remove commented code in bcmgenet_xmit()

This code is commented since it is unused, left-over from the very first
time this driver was merged.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/genet/bcmgenet.c | 4 ----
 1 file changed, 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index 585645749d6d..72ce6e8115fa 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -1145,10 +1145,6 @@ static netdev_tx_t bcmgenet_xmit(struct sk_buff *skb, struct net_device *dev)
 		goto out;
 	}
 
-	/* reclaim xmited skb every 8 packets. */
-	/*if (ring->free_bds < ring->size - 8)*/
-		/*__bcmgenet_tx_reclaim(dev, ring);*/
-
 	/* set the SKB transmit checksum */
 	if (priv->desc_64b_en) {
 		ret = bcmgenet_put_tx_csum(dev, skb);
-- 
cgit v1.2.2


From 51adfcc333e1490d3a22490f5b3504f64c7b28b4 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Mon, 24 Feb 2014 16:56:13 -0800
Subject: net: bcmgenet: remove unused bh_lock member

bh_lock spinlock is unused, remove it from the private driver structure.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/genet/bcmgenet.h | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.h b/drivers/net/ethernet/broadcom/genet/bcmgenet.h
index 8e48db8a1789..a6758adefaab 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.h
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.h
@@ -524,7 +524,6 @@ struct bcmgenet_priv {
 	enum bcmgenet_version version;
 	struct net_device *dev;
 	spinlock_t lock;
-	spinlock_t bh_lock;
 	u32 int0_mask;
 	u32 int1_mask;
 
-- 
cgit v1.2.2


From cd2b0389dc304c6a7fa2ebae200f246059c68dd9 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Thu, 20 Feb 2014 13:25:51 -0800
Subject: bnx2x: Remove hidden flow control goto from BNX2X_ALLOC macros

BNX2X_ALLOC macros use "goto alloc_mem_err"
so these labels appear unused in some functions.

Expand these macros in-place via coccinelle and
some typing.

Update the macros to use statement expressions
and remove the BNX2X_ALLOC macro.

This adds some > 80 char lines.

$ cat bnx2x_pci_alloc.cocci
@@
expression e1;
expression e2;
expression e3;
@@
-	BNX2X_PCI_ALLOC(e1, e2, e3);
+	e1 = BNX2X_PCI_ALLOC(e2, e3); if (!e1) goto alloc_mem_err;

@@
expression e1;
expression e2;
expression e3;
@@
-	BNX2X_PCI_FALLOC(e1, e2, e3);
+	e1 = BNX2X_PCI_FALLOC(e2, e3); if (!e1) goto alloc_mem_err;

@@
expression e1;
expression e2;
@@
-	BNX2X_ALLOC(e1, e2);
+	e1 = kzalloc(e2, GFP_KERNEL); if (!e1) goto alloc_mem_err;

@@
expression e1;
expression e2;
expression e3;
@@
-	kzalloc(sizeof(e1) * e2, e3)
+	kcalloc(e2, sizeof(e1), e3)

@@
expression e1;
expression e2;
expression e3;
@@
-	kzalloc(e1 * sizeof(e2), e3)
+	kcalloc(e1, sizeof(e2), e3)

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c   | 77 ++++++++++++++---------
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h   | 45 ++++++-------
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c  | 69 +++++++++++++-------
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c | 36 +++++++----
 4 files changed, 138 insertions(+), 89 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
index 5ee13af78e53..89d75c24335c 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -2228,8 +2228,10 @@ static int bnx2x_alloc_fw_stats_mem(struct bnx2x *bp)
 		sizeof(struct per_queue_stats) * num_queue_stats +
 		sizeof(struct stats_counter);
 
-	BNX2X_PCI_ALLOC(bp->fw_stats, &bp->fw_stats_mapping,
-			bp->fw_stats_data_sz + bp->fw_stats_req_sz);
+	bp->fw_stats = BNX2X_PCI_ALLOC(&bp->fw_stats_mapping,
+				       bp->fw_stats_data_sz + bp->fw_stats_req_sz);
+	if (!bp->fw_stats)
+		goto alloc_mem_err;
 
 	/* Set shortcuts */
 	bp->fw_stats_req = (struct bnx2x_fw_stats_req *)bp->fw_stats;
@@ -4357,14 +4359,17 @@ static int bnx2x_alloc_fp_mem_at(struct bnx2x *bp, int index)
 
 	if (!IS_FCOE_IDX(index)) {
 		/* status blocks */
-		if (!CHIP_IS_E1x(bp))
-			BNX2X_PCI_ALLOC(sb->e2_sb,
-				&bnx2x_fp(bp, index, status_blk_mapping),
-				sizeof(struct host_hc_status_block_e2));
-		else
-			BNX2X_PCI_ALLOC(sb->e1x_sb,
-				&bnx2x_fp(bp, index, status_blk_mapping),
-			    sizeof(struct host_hc_status_block_e1x));
+		if (!CHIP_IS_E1x(bp)) {
+			sb->e2_sb = BNX2X_PCI_ALLOC(&bnx2x_fp(bp, index, status_blk_mapping),
+						    sizeof(struct host_hc_status_block_e2));
+			if (!sb->e2_sb)
+				goto alloc_mem_err;
+		} else {
+			sb->e1x_sb = BNX2X_PCI_ALLOC(&bnx2x_fp(bp, index, status_blk_mapping),
+						     sizeof(struct host_hc_status_block_e1x));
+			if (!sb->e1x_sb)
+				goto alloc_mem_err;
+		}
 	}
 
 	/* FCoE Queue uses Default SB and doesn't ACK the SB, thus no need to
@@ -4383,35 +4388,49 @@ static int bnx2x_alloc_fp_mem_at(struct bnx2x *bp, int index)
 			   "allocating tx memory of fp %d cos %d\n",
 			   index, cos);
 
-			BNX2X_ALLOC(txdata->tx_buf_ring,
-				sizeof(struct sw_tx_bd) * NUM_TX_BD);
-			BNX2X_PCI_ALLOC(txdata->tx_desc_ring,
-				&txdata->tx_desc_mapping,
-				sizeof(union eth_tx_bd_types) * NUM_TX_BD);
+			txdata->tx_buf_ring = kcalloc(NUM_TX_BD,
+						      sizeof(struct sw_tx_bd),
+						      GFP_KERNEL);
+			if (!txdata->tx_buf_ring)
+				goto alloc_mem_err;
+			txdata->tx_desc_ring = BNX2X_PCI_ALLOC(&txdata->tx_desc_mapping,
+							       sizeof(union eth_tx_bd_types) * NUM_TX_BD);
+			if (!txdata->tx_desc_ring)
+				goto alloc_mem_err;
 		}
 	}
 
 	/* Rx */
 	if (!skip_rx_queue(bp, index)) {
 		/* fastpath rx rings: rx_buf rx_desc rx_comp */
-		BNX2X_ALLOC(bnx2x_fp(bp, index, rx_buf_ring),
-				sizeof(struct sw_rx_bd) * NUM_RX_BD);
-		BNX2X_PCI_ALLOC(bnx2x_fp(bp, index, rx_desc_ring),
-				&bnx2x_fp(bp, index, rx_desc_mapping),
-				sizeof(struct eth_rx_bd) * NUM_RX_BD);
+		bnx2x_fp(bp, index, rx_buf_ring) =
+			kcalloc(NUM_RX_BD, sizeof(struct sw_rx_bd), GFP_KERNEL);
+		if (!bnx2x_fp(bp, index, rx_buf_ring))
+			goto alloc_mem_err;
+		bnx2x_fp(bp, index, rx_desc_ring) =
+			BNX2X_PCI_ALLOC(&bnx2x_fp(bp, index, rx_desc_mapping),
+					sizeof(struct eth_rx_bd) * NUM_RX_BD);
+		if (!bnx2x_fp(bp, index, rx_desc_ring))
+			goto alloc_mem_err;
 
 		/* Seed all CQEs by 1s */
-		BNX2X_PCI_FALLOC(bnx2x_fp(bp, index, rx_comp_ring),
-				 &bnx2x_fp(bp, index, rx_comp_mapping),
-				 sizeof(struct eth_fast_path_rx_cqe) *
-				 NUM_RCQ_BD);
+		bnx2x_fp(bp, index, rx_comp_ring) =
+			BNX2X_PCI_FALLOC(&bnx2x_fp(bp, index, rx_comp_mapping),
+					 sizeof(struct eth_fast_path_rx_cqe) * NUM_RCQ_BD);
+		if (!bnx2x_fp(bp, index, rx_comp_ring))
+			goto alloc_mem_err;
 
 		/* SGE ring */
-		BNX2X_ALLOC(bnx2x_fp(bp, index, rx_page_ring),
-				sizeof(struct sw_rx_page) * NUM_RX_SGE);
-		BNX2X_PCI_ALLOC(bnx2x_fp(bp, index, rx_sge_ring),
-				&bnx2x_fp(bp, index, rx_sge_mapping),
-				BCM_PAGE_SIZE * NUM_RX_SGE_PAGES);
+		bnx2x_fp(bp, index, rx_page_ring) =
+			kcalloc(NUM_RX_SGE, sizeof(struct sw_rx_page),
+				GFP_KERNEL);
+		if (!bnx2x_fp(bp, index, rx_page_ring))
+			goto alloc_mem_err;
+		bnx2x_fp(bp, index, rx_sge_ring) =
+			BNX2X_PCI_ALLOC(&bnx2x_fp(bp, index, rx_sge_mapping),
+					BCM_PAGE_SIZE * NUM_RX_SGE_PAGES);
+		if (!bnx2x_fp(bp, index, rx_sge_ring))
+			goto alloc_mem_err;
 		/* RX BD ring */
 		bnx2x_set_next_page_rx_bd(fp);
 
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
index ec02b15fba32..05f4f5f52635 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
@@ -47,31 +47,26 @@ extern int bnx2x_num_queues;
 		} \
 	} while (0)
 
-#define BNX2X_PCI_ALLOC(x, y, size) \
-	do { \
-		x = dma_zalloc_coherent(&bp->pdev->dev, size, y, GFP_KERNEL); \
-		if (x == NULL) \
-			goto alloc_mem_err; \
-		DP(NETIF_MSG_HW, "BNX2X_PCI_ALLOC: Physical %Lx Virtual %p\n", \
-		   (unsigned long long)(*y), x); \
-	} while (0)
-
-#define BNX2X_PCI_FALLOC(x, y, size) \
-	do { \
-		x = dma_alloc_coherent(&bp->pdev->dev, size, y, GFP_KERNEL); \
-		if (x == NULL) \
-			goto alloc_mem_err; \
-		memset((void *)x, 0xFFFFFFFF, size); \
-		DP(NETIF_MSG_HW, "BNX2X_PCI_FALLOC: Physical %Lx Virtual %p\n",\
-		   (unsigned long long)(*y), x); \
-	} while (0)
-
-#define BNX2X_ALLOC(x, size) \
-	do { \
-		x = kzalloc(size, GFP_KERNEL); \
-		if (x == NULL) \
-			goto alloc_mem_err; \
-	} while (0)
+#define BNX2X_PCI_ALLOC(y, size)					\
+({									\
+	void *x = dma_zalloc_coherent(&bp->pdev->dev, size, y, GFP_KERNEL); \
+	if (x)								\
+		DP(NETIF_MSG_HW,					\
+		   "BNX2X_PCI_ALLOC: Physical %Lx Virtual %p\n",	\
+		   (unsigned long long)(*y), x);			\
+	x;								\
+})
+#define BNX2X_PCI_FALLOC(y, size)					\
+({									\
+	void *x = dma_alloc_coherent(&bp->pdev->dev, size, y, GFP_KERNEL); \
+	if (x) {							\
+		memset(x, 0xff, size);					\
+		DP(NETIF_MSG_HW,					\
+		   "BNX2X_PCI_FALLOC: Physical %Lx Virtual %p\n",	\
+		   (unsigned long long)(*y), x);			\
+	}								\
+	x;								\
+})
 
 /*********************** Interfaces ****************************
  *  Functions that need to be implemented by each driver version
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 84439152e499..230dea623895 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -8001,19 +8001,25 @@ void bnx2x_free_mem(struct bnx2x *bp)
 
 int bnx2x_alloc_mem_cnic(struct bnx2x *bp)
 {
-	if (!CHIP_IS_E1x(bp))
+	if (!CHIP_IS_E1x(bp)) {
 		/* size = the status block + ramrod buffers */
-		BNX2X_PCI_ALLOC(bp->cnic_sb.e2_sb, &bp->cnic_sb_mapping,
-				sizeof(struct host_hc_status_block_e2));
-	else
-		BNX2X_PCI_ALLOC(bp->cnic_sb.e1x_sb,
-				&bp->cnic_sb_mapping,
-				sizeof(struct
-				       host_hc_status_block_e1x));
+		bp->cnic_sb.e2_sb = BNX2X_PCI_ALLOC(&bp->cnic_sb_mapping,
+						    sizeof(struct host_hc_status_block_e2));
+		if (!bp->cnic_sb.e2_sb)
+			goto alloc_mem_err;
+	} else {
+		bp->cnic_sb.e1x_sb = BNX2X_PCI_ALLOC(&bp->cnic_sb_mapping,
+						     sizeof(struct host_hc_status_block_e1x));
+		if (!bp->cnic_sb.e1x_sb)
+			goto alloc_mem_err;
+	}
 
-	if (CONFIGURE_NIC_MODE(bp) && !bp->t2)
+	if (CONFIGURE_NIC_MODE(bp) && !bp->t2) {
 		/* allocate searcher T2 table, as it wasn't allocated before */
-		BNX2X_PCI_ALLOC(bp->t2, &bp->t2_mapping, SRC_T2_SZ);
+		bp->t2 = BNX2X_PCI_ALLOC(&bp->t2_mapping, SRC_T2_SZ);
+		if (!bp->t2)
+			goto alloc_mem_err;
+	}
 
 	/* write address to which L5 should insert its values */
 	bp->cnic_eth_dev.addr_drv_info_to_mcp =
@@ -8034,15 +8040,22 @@ int bnx2x_alloc_mem(struct bnx2x *bp)
 {
 	int i, allocated, context_size;
 
-	if (!CONFIGURE_NIC_MODE(bp) && !bp->t2)
+	if (!CONFIGURE_NIC_MODE(bp) && !bp->t2) {
 		/* allocate searcher T2 table */
-		BNX2X_PCI_ALLOC(bp->t2, &bp->t2_mapping, SRC_T2_SZ);
+		bp->t2 = BNX2X_PCI_ALLOC(&bp->t2_mapping, SRC_T2_SZ);
+		if (!bp->t2)
+			goto alloc_mem_err;
+	}
 
-	BNX2X_PCI_ALLOC(bp->def_status_blk, &bp->def_status_blk_mapping,
-			sizeof(struct host_sp_status_block));
+	bp->def_status_blk = BNX2X_PCI_ALLOC(&bp->def_status_blk_mapping,
+					     sizeof(struct host_sp_status_block));
+	if (!bp->def_status_blk)
+		goto alloc_mem_err;
 
-	BNX2X_PCI_ALLOC(bp->slowpath, &bp->slowpath_mapping,
-			sizeof(struct bnx2x_slowpath));
+	bp->slowpath = BNX2X_PCI_ALLOC(&bp->slowpath_mapping,
+				       sizeof(struct bnx2x_slowpath));
+	if (!bp->slowpath)
+		goto alloc_mem_err;
 
 	/* Allocate memory for CDU context:
 	 * This memory is allocated separately and not in the generic ILT
@@ -8062,12 +8075,16 @@ int bnx2x_alloc_mem(struct bnx2x *bp)
 	for (i = 0, allocated = 0; allocated < context_size; i++) {
 		bp->context[i].size = min(CDU_ILT_PAGE_SZ,
 					  (context_size - allocated));
-		BNX2X_PCI_ALLOC(bp->context[i].vcxt,
-				&bp->context[i].cxt_mapping,
-				bp->context[i].size);
+		bp->context[i].vcxt = BNX2X_PCI_ALLOC(&bp->context[i].cxt_mapping,
+						      bp->context[i].size);
+		if (!bp->context[i].vcxt)
+			goto alloc_mem_err;
 		allocated += bp->context[i].size;
 	}
-	BNX2X_ALLOC(bp->ilt->lines, sizeof(struct ilt_line) * ILT_MAX_LINES);
+	bp->ilt->lines = kcalloc(ILT_MAX_LINES, sizeof(struct ilt_line),
+				 GFP_KERNEL);
+	if (!bp->ilt->lines)
+		goto alloc_mem_err;
 
 	if (bnx2x_ilt_mem_op(bp, ILT_MEMOP_ALLOC))
 		goto alloc_mem_err;
@@ -8076,11 +8093,15 @@ int bnx2x_alloc_mem(struct bnx2x *bp)
 		goto alloc_mem_err;
 
 	/* Slow path ring */
-	BNX2X_PCI_ALLOC(bp->spq, &bp->spq_mapping, BCM_PAGE_SIZE);
+	bp->spq = BNX2X_PCI_ALLOC(&bp->spq_mapping, BCM_PAGE_SIZE);
+	if (!bp->spq)
+		goto alloc_mem_err;
 
 	/* EQ */
-	BNX2X_PCI_ALLOC(bp->eq_ring, &bp->eq_mapping,
-			BCM_PAGE_SIZE * NUM_EQ_PAGES);
+	bp->eq_ring = BNX2X_PCI_ALLOC(&bp->eq_mapping,
+				      BCM_PAGE_SIZE * NUM_EQ_PAGES);
+	if (!bp->eq_ring)
+		goto alloc_mem_err;
 
 	return 0;
 
@@ -11954,7 +11975,7 @@ static int bnx2x_init_mcast_macs_list(struct bnx2x *bp,
 {
 	int mc_count = netdev_mc_count(bp->dev);
 	struct bnx2x_mcast_list_elem *mc_mac =
-		kzalloc(sizeof(*mc_mac) * mc_count, GFP_ATOMIC);
+		kcalloc(mc_count, sizeof(*mc_mac), GFP_ATOMIC);
 	struct netdev_hw_addr *ha;
 
 	if (!mc_mac)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
index 98b53671a652..61e6f606d8a4 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
@@ -2120,7 +2120,9 @@ int bnx2x_iov_alloc_mem(struct bnx2x *bp)
 		cxt->size = min_t(size_t, tot_size, CDU_ILT_PAGE_SZ);
 
 		if (cxt->size) {
-			BNX2X_PCI_ALLOC(cxt->addr, &cxt->mapping, cxt->size);
+			cxt->addr = BNX2X_PCI_ALLOC(&cxt->mapping, cxt->size);
+			if (!cxt->addr)
+				goto alloc_mem_err;
 		} else {
 			cxt->addr = NULL;
 			cxt->mapping = 0;
@@ -2130,20 +2132,28 @@ int bnx2x_iov_alloc_mem(struct bnx2x *bp)
 
 	/* allocate vfs ramrods dma memory - client_init and set_mac */
 	tot_size = BNX2X_NR_VIRTFN(bp) * sizeof(struct bnx2x_vf_sp);
-	BNX2X_PCI_ALLOC(BP_VFDB(bp)->sp_dma.addr, &BP_VFDB(bp)->sp_dma.mapping,
-			tot_size);
+	BP_VFDB(bp)->sp_dma.addr = BNX2X_PCI_ALLOC(&BP_VFDB(bp)->sp_dma.mapping,
+						   tot_size);
+	if (!BP_VFDB(bp)->sp_dma.addr)
+		goto alloc_mem_err;
 	BP_VFDB(bp)->sp_dma.size = tot_size;
 
 	/* allocate mailboxes */
 	tot_size = BNX2X_NR_VIRTFN(bp) * MBX_MSG_ALIGNED_SIZE;
-	BNX2X_PCI_ALLOC(BP_VF_MBX_DMA(bp)->addr, &BP_VF_MBX_DMA(bp)->mapping,
-			tot_size);
+	BP_VF_MBX_DMA(bp)->addr = BNX2X_PCI_ALLOC(&BP_VF_MBX_DMA(bp)->mapping,
+						  tot_size);
+	if (!BP_VF_MBX_DMA(bp)->addr)
+		goto alloc_mem_err;
+
 	BP_VF_MBX_DMA(bp)->size = tot_size;
 
 	/* allocate local bulletin boards */
 	tot_size = BNX2X_NR_VIRTFN(bp) * BULLETIN_CONTENT_SIZE;
-	BNX2X_PCI_ALLOC(BP_VF_BULLETIN_DMA(bp)->addr,
-			&BP_VF_BULLETIN_DMA(bp)->mapping, tot_size);
+	BP_VF_BULLETIN_DMA(bp)->addr = BNX2X_PCI_ALLOC(&BP_VF_BULLETIN_DMA(bp)->mapping,
+						       tot_size);
+	if (!BP_VF_BULLETIN_DMA(bp)->addr)
+		goto alloc_mem_err;
+
 	BP_VF_BULLETIN_DMA(bp)->size = tot_size;
 
 	return 0;
@@ -3825,12 +3835,16 @@ int bnx2x_vf_pci_alloc(struct bnx2x *bp)
 	mutex_init(&bp->vf2pf_mutex);
 
 	/* allocate vf2pf mailbox for vf to pf channel */
-	BNX2X_PCI_ALLOC(bp->vf2pf_mbox, &bp->vf2pf_mbox_mapping,
-			sizeof(struct bnx2x_vf_mbx_msg));
+	bp->vf2pf_mbox = BNX2X_PCI_ALLOC(&bp->vf2pf_mbox_mapping,
+					 sizeof(struct bnx2x_vf_mbx_msg));
+	if (!bp->vf2pf_mbox)
+		goto alloc_mem_err;
 
 	/* allocate pf 2 vf bulletin board */
-	BNX2X_PCI_ALLOC(bp->pf2vf_bulletin, &bp->pf2vf_bulletin_mapping,
-			sizeof(union pf_vf_bulletin));
+	bp->pf2vf_bulletin = BNX2X_PCI_ALLOC(&bp->pf2vf_bulletin_mapping,
+					     sizeof(union pf_vf_bulletin));
+	if (!bp->pf2vf_bulletin)
+		goto alloc_mem_err;
 
 	return 0;
 
-- 
cgit v1.2.2


From 26ebbccfb73f59edd67a41b18706f36f1b1edae1 Mon Sep 17 00:00:00 2001
From: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
Date: Tue, 25 Feb 2014 09:29:54 +0200
Subject: ath10k: implement drv_get_tsf for ibss merging

Implement the get TSF by simply returning 0 so that IBSS
merging is happening. Otherwise, IBSS nodes that have similar
SSID naming won't merge. This is simply fooling the mac80211
that the TSF in the received beacon is higher than the local TSF.

Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/mac.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index e17f5d732b5a..301d960c0e98 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -4060,6 +4060,16 @@ static void ath10k_sta_rc_update(struct ieee80211_hw *hw,
 	ieee80211_queue_work(hw, &arsta->update_wk);
 }
 
+static u64 ath10k_get_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
+{
+	/*
+	 * FIXME: Return 0 for time being. Need to figure out whether FW
+	 * has the API to fetch 64-bit local TSF
+	 */
+
+	return 0;
+}
+
 static const struct ieee80211_ops ath10k_ops = {
 	.tx				= ath10k_tx,
 	.start				= ath10k_start,
@@ -4085,6 +4095,7 @@ static const struct ieee80211_ops ath10k_ops = {
 	.set_bitrate_mask		= ath10k_set_bitrate_mask,
 	.channel_switch_beacon		= ath10k_channel_switch_beacon,
 	.sta_rc_update			= ath10k_sta_rc_update,
+	.get_tsf			= ath10k_get_tsf,
 #ifdef CONFIG_PM
 	.suspend			= ath10k_suspend,
 	.resume				= ath10k_resume,
-- 
cgit v1.2.2


From 9ba4c787aac4923855fac596cebb2b8c42e488fb Mon Sep 17 00:00:00 2001
From: Ben Greear <greearb@candelatech.com>
Date: Tue, 25 Feb 2014 09:29:57 +0200
Subject: ath10k:  add more details to some debug messages

Makes it easier to determine why some failures
happened.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/mac.c  | 3 ++-
 drivers/net/wireless/ath/ath10k/txrx.c | 3 ++-
 2 files changed, 4 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 301d960c0e98..31932940c64d 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -3539,7 +3539,8 @@ static void ath10k_flush(struct ieee80211_hw *hw, u32 queues, bool drop)
 		}), ATH10K_FLUSH_TIMEOUT_HZ);
 
 	if (ret <= 0 || skip)
-		ath10k_warn("tx not flushed\n");
+		ath10k_warn("tx not flushed (skip %i ar-state %i): %i\n",
+			    skip, ar->state, ret);
 
 skip:
 	mutex_unlock(&ar->conf_mutex);
diff --git a/drivers/net/wireless/ath/ath10k/txrx.c b/drivers/net/wireless/ath/ath10k/txrx.c
index ec6f82521b0e..8271df2eb21d 100644
--- a/drivers/net/wireless/ath/ath10k/txrx.c
+++ b/drivers/net/wireless/ath/ath10k/txrx.c
@@ -378,7 +378,8 @@ void ath10k_peer_unmap_event(struct ath10k_htt *htt,
 	spin_lock_bh(&ar->data_lock);
 	peer = ath10k_peer_find_by_id(ar, ev->peer_id);
 	if (!peer) {
-		ath10k_warn("unknown peer id %d\n", ev->peer_id);
+		ath10k_warn("peer-unmap-event: unknown peer id %d\n",
+			    ev->peer_id);
 		goto exit;
 	}
 
-- 
cgit v1.2.2


From d960c369c8adddf79b0188aad1dbdafa22f68d97 Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Tue, 25 Feb 2014 09:29:57 +0200
Subject: ath10k: fix 4addr rx

The nwifi header is padded to 4 bytes. This wasn't
a problem until one tried to (at least) rx 4addr
frames.

This finally allows managed iface to be used in a
bridge.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/htt_rx.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index 4767c24bf819..040a85418599 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -632,6 +632,12 @@ struct amsdu_subframe_hdr {
 	__be16 len;
 } __packed;
 
+static int ath10k_htt_rx_nwifi_hdrlen(struct ieee80211_hdr *hdr)
+{
+	/* nwifi header is padded to 4 bytes. this fixes 4addr rx */
+	return round_up(ieee80211_hdrlen(hdr->frame_control), 4);
+}
+
 static void ath10k_htt_rx_amsdu(struct ath10k_htt *htt,
 				struct htt_rx_info *info)
 {
@@ -681,7 +687,7 @@ static void ath10k_htt_rx_amsdu(struct ath10k_htt *htt,
 		case RX_MSDU_DECAP_NATIVE_WIFI:
 			/* pull decapped header and copy DA */
 			hdr = (struct ieee80211_hdr *)skb->data;
-			hdr_len = ieee80211_hdrlen(hdr->frame_control);
+			hdr_len = ath10k_htt_rx_nwifi_hdrlen(hdr);
 			memcpy(addr, ieee80211_get_DA(hdr), ETH_ALEN);
 			skb_pull(skb, hdr_len);
 
@@ -768,7 +774,7 @@ static void ath10k_htt_rx_msdu(struct ath10k_htt *htt, struct htt_rx_info *info)
 	case RX_MSDU_DECAP_NATIVE_WIFI:
 		/* Pull decapped header */
 		hdr = (struct ieee80211_hdr *)skb->data;
-		hdr_len = ieee80211_hdrlen(hdr->frame_control);
+		hdr_len = ath10k_htt_rx_nwifi_hdrlen(hdr);
 		skb_pull(skb, hdr_len);
 
 		/* Push original header */
-- 
cgit v1.2.2


From 76f900244f084ae684c282f7aac938419d6afb2e Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Tue, 25 Feb 2014 09:29:57 +0200
Subject: ath10k: fix sta_rc_update for non-ap iftype

The arsta structure wasn't initialized for
non-ap interfaces. This should fix related
warnings/crashes.

Reported-By: Ben Greear <greearb@candelatech.com>
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/mac.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 31932940c64d..27466d83ea86 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -3179,6 +3179,13 @@ static int ath10k_sta_state(struct ieee80211_hw *hw,
 	int max_num_peers;
 	int ret = 0;
 
+	if (old_state == IEEE80211_STA_NOTEXIST &&
+	    new_state == IEEE80211_STA_NONE) {
+		memset(arsta, 0, sizeof(*arsta));
+		arsta->arvif = arvif;
+		INIT_WORK(&arsta->update_wk, ath10k_sta_rc_update_wk);
+	}
+
 	/* cancel must be done outside the mutex to avoid deadlock */
 	if ((old_state == IEEE80211_STA_NONE &&
 	     new_state == IEEE80211_STA_NOTEXIST))
@@ -3208,10 +3215,6 @@ static int ath10k_sta_state(struct ieee80211_hw *hw,
 			   "mac vdev %d peer create %pM (new sta) num_peers %d\n",
 			   arvif->vdev_id, sta->addr, ar->num_peers);
 
-		memset(arsta, 0, sizeof(*arsta));
-		arsta->arvif = arvif;
-		INIT_WORK(&arsta->update_wk, ath10k_sta_rc_update_wk);
-
 		ret = ath10k_peer_create(ar, arvif->vdev_id, sta->addr);
 		if (ret)
 			ath10k_warn("Failed to add peer %pM for vdev %d when adding a new sta: %i\n",
-- 
cgit v1.2.2


From 7d0445d66a7619e23257570daa794dbf1d89c2a6 Mon Sep 17 00:00:00 2001
From: Michal Schmidt <mschmidt@redhat.com>
Date: Tue, 25 Feb 2014 16:04:24 +0100
Subject: bnx2x: clamp num_queues to prevent passing a negative value

Use the clamp() macro to make the calculation of the number of queues
slightly easier to understand. It also avoids a crash when someone
accidentally passes a negative value in num_queues= module parameter.

Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
index 89d75c24335c..34d124998823 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -61,10 +61,9 @@ static void bnx2x_add_all_napi(struct bnx2x *bp)
 
 static int bnx2x_calc_num_queues(struct bnx2x *bp)
 {
-	return  bnx2x_num_queues ?
-		 min_t(int, bnx2x_num_queues, BNX2X_MAX_QUEUES(bp)) :
-		 min_t(int, netif_get_num_default_rss_queues(),
-		       BNX2X_MAX_QUEUES(bp));
+	int nq = bnx2x_num_queues ? : netif_get_num_default_rss_queues();
+	nq = clamp(nq, 1, BNX2X_MAX_QUEUES(bp));
+	return nq;
 }
 
 /**
-- 
cgit v1.2.2


From ff2ad3071f56697920a7154ca301fd45d17d57d2 Mon Sep 17 00:00:00 2001
From: Michal Schmidt <mschmidt@redhat.com>
Date: Tue, 25 Feb 2014 16:04:25 +0100
Subject: bnx2x: save RAM in kdump kernel by using a single queue

When running in a kdump kernel, make sure to use only a single ethernet
queue even if a num_queues option in /etc/modprobe.d/*.conf would specify
otherwise. This saves memory, which tends to be scarce in kdump.

This saves about 40 MB in the kdump environment on a setup with
num_queues=8 in the config file.

Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
index 34d124998823..26bc25bd465d 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -62,6 +62,11 @@ static void bnx2x_add_all_napi(struct bnx2x *bp)
 static int bnx2x_calc_num_queues(struct bnx2x *bp)
 {
 	int nq = bnx2x_num_queues ? : netif_get_num_default_rss_queues();
+
+	/* Reduce memory usage in kdump environment by using only one queue */
+	if (reset_devices)
+		nq = 1;
+
 	nq = clamp(nq, 1, BNX2X_MAX_QUEUES(bp));
 	return nq;
 }
-- 
cgit v1.2.2


From 94d9de3cf7b7902253e65d7aef30f2db051c1ac6 Mon Sep 17 00:00:00 2001
From: Michal Schmidt <mschmidt@redhat.com>
Date: Tue, 25 Feb 2014 16:04:26 +0100
Subject: bnx2x: save RAM in kdump kernel by disabling TPA

When running in a kdump kernel, disable TPA. This saves memory, which
tends to be scarce in kdump.

TPA, being a receive acceleration, is unlikely to be useful for kdump,
whose purpose is to send the memory image out.

This saves additional 5 MB in the kdump environment.

Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 230dea623895..5e74599b05c7 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -11804,6 +11804,8 @@ static int bnx2x_init_bp(struct bnx2x *bp)
 
 	bp->disable_tpa = disable_tpa;
 	bp->disable_tpa |= IS_MF_STORAGE_SD(bp) || IS_MF_FCOE_AFEX(bp);
+	/* Reduce memory usage in kdump environment by disabling TPA */
+	bp->disable_tpa |= reset_devices;
 
 	/* Set TPA flags */
 	if (bp->disable_tpa) {
-- 
cgit v1.2.2


From 76a066f2a2a0268b565459c417b59724b5a3197b Mon Sep 17 00:00:00 2001
From: Amir Vadai <amirv@mellanox.com>
Date: Tue, 25 Feb 2014 18:17:51 +0200
Subject: net/mlx4_en: Expose port number through sysfs

Initialize dev_port with port number (0 based) to be accessed through
sysfs from user space.

Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
index fad45316200a..caa488a286f0 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
@@ -2342,6 +2342,7 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
 
 	SET_NETDEV_DEV(dev, &mdev->dev->pdev->dev);
 	dev->dev_id =  port - 1;
+	dev->dev_port = port - 1;
 
 	/*
 	 * Initialize driver private data
-- 
cgit v1.2.2


From ca9f9f703950e5cb300526549b4f1b0a6605a5c5 Mon Sep 17 00:00:00 2001
From: Amir Vadai <amirv@mellanox.com>
Date: Tue, 25 Feb 2014 18:17:52 +0200
Subject: net/mlx4_en: Fix bad use of dev_id

dev_id should be set for multiple netdev's sharing the same MAC, which
is not the case here.

Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
index caa488a286f0..2c0823bf3e05 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
@@ -2341,7 +2341,6 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
 	netif_set_real_num_rx_queues(dev, prof->rx_ring_num);
 
 	SET_NETDEV_DEV(dev, &mdev->dev->pdev->dev);
-	dev->dev_id =  port - 1;
 	dev->dev_port = port - 1;
 
 	/*
-- 
cgit v1.2.2


From 86c3f0f8307ac18f3ad3109e1969c62b8fbed5df Mon Sep 17 00:00:00 2001
From: Pablo Neira Ayuso <pablo@gnumonks.org>
Date: Tue, 25 Feb 2014 17:46:10 +0100
Subject: vxlan: remove unused port variable in vxlan_udp_encap_recv()

Signed-off-by: Pablo Neira Ayuso <pablo@gnumonks.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/vxlan.c | 3 ---
 1 file changed, 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c
index dec9820bc182..eb59b14d5ee0 100644
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -1132,7 +1132,6 @@ static int vxlan_udp_encap_recv(struct sock *sk, struct sk_buff *skb)
 {
 	struct vxlan_sock *vs;
 	struct vxlanhdr *vxh;
-	__be16 port;
 
 	/* Need Vxlan and inner Ethernet header to be present */
 	if (!pskb_may_pull(skb, VXLAN_HLEN))
@@ -1150,8 +1149,6 @@ static int vxlan_udp_encap_recv(struct sock *sk, struct sk_buff *skb)
 	if (iptunnel_pull_header(skb, VXLAN_HLEN, htons(ETH_P_TEB)))
 		goto drop;
 
-	port = inet_sk(sk)->inet_sport;
-
 	vs = rcu_dereference_sk_user_data(sk);
 	if (!vs)
 		goto drop;
-- 
cgit v1.2.2


From 44a6bd865623be7154e495e228abb2a1465fe13e Mon Sep 17 00:00:00 2001
From: Jean Sacren <sakiwit@gmail.com>
Date: Tue, 25 Feb 2014 22:38:29 -0700
Subject: ieee802154: fix new function declaration

The commit 8fad346f366a7 ("eee802154: add basic support for RF212 to
at86rf230 driver") introduced the new function is_rf212() with some
minor issues in declaration:

1) Fix the function type by changing it to bool as the function
   definition returns a boolean value. Additionally both callers of
   is_rf212() are expected to return a boolean value.

2) Fix the function specifier by deleting the inline keyword as the
   compiler takes care of that.

Signed-off-by: Jean Sacren <sakiwit@gmail.com>
Cc: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ieee802154/at86rf230.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index 34bf011584fb..dd9ef5e1c730 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -57,7 +57,7 @@ struct at86rf230_local {
 	int rssi_base_val;
 };
 
-static inline int is_rf212(struct at86rf230_local *local)
+static bool is_rf212(struct at86rf230_local *local)
 {
 	return local->part == 7;
 }
-- 
cgit v1.2.2


From d773ce2de1c670e0d259870a2ea8fd9f60ab98cd Mon Sep 17 00:00:00 2001
From: Don Skidmore <donald.c.skidmore@intel.com>
Date: Tue, 25 Feb 2014 17:58:53 -0800
Subject: ixgbe: modify behavior on receiving a HW ECC error.

Currently when we noticed a HW ECC error we would request the use reload
the driver to force a reset of the part.  This was done due to the mistaken
believe that a normal reset would not be sufficient.  Well it turns out it
would be so now we just schedule a reset upon seeing the ECC.

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 18076c4178b4..c7b2ae5570b4 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -2630,9 +2630,12 @@ static irqreturn_t ixgbe_msix_other(int irq, void *data)
 	switch (hw->mac.type) {
 	case ixgbe_mac_82599EB:
 	case ixgbe_mac_X540:
-		if (eicr & IXGBE_EICR_ECC)
-			e_info(link, "Received unrecoverable ECC Err, please "
-			       "reboot\n");
+		if (eicr & IXGBE_EICR_ECC) {
+			e_info(link, "Received ECC Err, initiating reset\n");
+			adapter->flags2 |= IXGBE_FLAG2_RESET_REQUESTED;
+			ixgbe_service_event_schedule(adapter);
+			IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_ECC);
+		}
 		/* Handle Flow Director Full threshold interrupt */
 		if (eicr & IXGBE_EICR_FLOW_DIR) {
 			int reinit_count = 0;
@@ -2846,9 +2849,12 @@ static irqreturn_t ixgbe_intr(int irq, void *data)
 		ixgbe_check_sfp_event(adapter, eicr);
 		/* Fall through */
 	case ixgbe_mac_X540:
-		if (eicr & IXGBE_EICR_ECC)
-			e_info(link, "Received unrecoverable ECC err, please "
-				     "reboot\n");
+		if (eicr & IXGBE_EICR_ECC) {
+			e_info(link, "Received ECC Err, initiating reset\n");
+			adapter->flags2 |= IXGBE_FLAG2_RESET_REQUESTED;
+			ixgbe_service_event_schedule(adapter);
+			IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_ECC);
+		}
 		ixgbe_check_overtemp_event(adapter, eicr);
 		break;
 	default:
-- 
cgit v1.2.2


From ca324099fb2feff62cd0d3e8ef007e2c2dc8b6a7 Mon Sep 17 00:00:00 2001
From: Jacob Keller <jacob.e.keller@intel.com>
Date: Tue, 25 Feb 2014 17:58:54 -0800
Subject: ixgbe: don't use magic size number to assign ptp_caps.name

Rather than using a magic size number, just use sizeof since that will
work and is more robust to future changes.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c
index 5184e2a1a7d8..9e54fcc13bc9 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c
@@ -840,7 +840,9 @@ void ixgbe_ptp_init(struct ixgbe_adapter *adapter)
 
 	switch (adapter->hw.mac.type) {
 	case ixgbe_mac_X540:
-		snprintf(adapter->ptp_caps.name, 16, "%s", netdev->name);
+		snprintf(adapter->ptp_caps.name,
+			 sizeof(adapter->ptp_caps.name),
+			 "%s", netdev->name);
 		adapter->ptp_caps.owner = THIS_MODULE;
 		adapter->ptp_caps.max_adj = 250000000;
 		adapter->ptp_caps.n_alarm = 0;
@@ -854,7 +856,9 @@ void ixgbe_ptp_init(struct ixgbe_adapter *adapter)
 		adapter->ptp_caps.enable = ixgbe_ptp_enable;
 		break;
 	case ixgbe_mac_82599EB:
-		snprintf(adapter->ptp_caps.name, 16, "%s", netdev->name);
+		snprintf(adapter->ptp_caps.name,
+			 sizeof(adapter->ptp_caps.name),
+			 "%s", netdev->name);
 		adapter->ptp_caps.owner = THIS_MODULE;
 		adapter->ptp_caps.max_adj = 250000000;
 		adapter->ptp_caps.n_alarm = 0;
-- 
cgit v1.2.2


From 87557440d82a569829e65069bb856c7d8c535f57 Mon Sep 17 00:00:00 2001
From: Mark Rustad <mark.d.rustad@intel.com>
Date: Tue, 25 Feb 2014 17:58:55 -0800
Subject: ixgbe: Add WoL support for a new device

Add WoL support for port 0 of a new 82599-based device.

Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 1 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_type.h | 1 +
 2 files changed, 2 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index c7b2ae5570b4..a345cc7b378c 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -7798,6 +7798,7 @@ int ixgbe_wol_supported(struct ixgbe_adapter *adapter, u16 device_id,
 	case IXGBE_DEV_ID_82599_SFP:
 		/* Only these subdevices could supports WOL */
 		switch (subdevice_id) {
+		case IXGBE_SUBDEV_ID_82599_SFP_WOL0:
 		case IXGBE_SUBDEV_ID_82599_560FLR:
 			/* only support first port */
 			if (hw->bus.func != 0)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
index 0d39cfc4a3bf..9283cffd1b57 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
@@ -54,6 +54,7 @@
 #define IXGBE_DEV_ID_82599_BACKPLANE_FCOE       0x152a
 #define IXGBE_DEV_ID_82599_SFP_FCOE      0x1529
 #define IXGBE_SUBDEV_ID_82599_SFP        0x11A9
+#define IXGBE_SUBDEV_ID_82599_SFP_WOL0   0x1071
 #define IXGBE_SUBDEV_ID_82599_RNDC       0x1F72
 #define IXGBE_SUBDEV_ID_82599_560FLR     0x17D0
 #define IXGBE_SUBDEV_ID_82599_SP_560FLR  0x211B
-- 
cgit v1.2.2


From 167f3f71c7e31da56c907b7363a36667a59dde85 Mon Sep 17 00:00:00 2001
From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Tue, 25 Feb 2014 17:58:56 -0800
Subject: igb: make local functions static and remove dead code

Based on Stephen Hemminger's original patch.
Make local functions static, and remove unused functions.

Reported-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/igb/e1000_82575.c |  4 +-
 drivers/net/ethernet/intel/igb/e1000_82575.h |  2 -
 drivers/net/ethernet/intel/igb/e1000_i210.c  | 20 ++++----
 drivers/net/ethernet/intel/igb/e1000_i210.h  |  9 ----
 drivers/net/ethernet/intel/igb/e1000_phy.c   | 71 ----------------------------
 drivers/net/ethernet/intel/igb/e1000_phy.h   |  1 -
 drivers/net/ethernet/intel/igb/igb.h         |  2 -
 drivers/net/ethernet/intel/igb/igb_ptp.c     |  6 ++-
 8 files changed, 17 insertions(+), 98 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c
index 06df6928f44c..0ee7049157b0 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -2720,7 +2720,7 @@ static const u8 e1000_emc_therm_limit[4] = {
  *
  *  Updates the temperatures in mac.thermal_sensor_data
  **/
-s32 igb_get_thermal_sensor_data_generic(struct e1000_hw *hw)
+static s32 igb_get_thermal_sensor_data_generic(struct e1000_hw *hw)
 {
 	s32 status = E1000_SUCCESS;
 	u16 ets_offset;
@@ -2774,7 +2774,7 @@ s32 igb_get_thermal_sensor_data_generic(struct e1000_hw *hw)
  *  Sets the thermal sensor thresholds according to the NVM map
  *  and save off the threshold and location values into mac.thermal_sensor_data
  **/
-s32 igb_init_thermal_sensor_thresh_generic(struct e1000_hw *hw)
+static s32 igb_init_thermal_sensor_thresh_generic(struct e1000_hw *hw)
 {
 	s32 status = E1000_SUCCESS;
 	u16 ets_offset;
diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.h b/drivers/net/ethernet/intel/igb/e1000_82575.h
index 8c2437722aad..622d80d59e2b 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.h
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.h
@@ -266,8 +266,6 @@ u16 igb_rxpbs_adjust_82580(u32 data);
 s32 igb_read_emi_reg(struct e1000_hw *, u16 addr, u16 *data);
 s32 igb_set_eee_i350(struct e1000_hw *);
 s32 igb_set_eee_i354(struct e1000_hw *);
-s32 igb_init_thermal_sensor_thresh_generic(struct e1000_hw *);
-s32 igb_get_thermal_sensor_data_generic(struct e1000_hw *hw);
 
 #define E1000_I2C_THERMAL_SENSOR_ADDR	0xF8
 #define E1000_EMC_INTERNAL_DATA		0x00
diff --git a/drivers/net/ethernet/intel/igb/e1000_i210.c b/drivers/net/ethernet/intel/igb/e1000_i210.c
index 0c0393316a3a..9f32c781c474 100644
--- a/drivers/net/ethernet/intel/igb/e1000_i210.c
+++ b/drivers/net/ethernet/intel/igb/e1000_i210.c
@@ -35,6 +35,8 @@
 #include "e1000_hw.h"
 #include "e1000_i210.h"
 
+static s32 igb_update_flash_i210(struct e1000_hw *hw);
+
 /**
  * igb_get_hw_semaphore_i210 - Acquire hardware semaphore
  *  @hw: pointer to the HW structure
@@ -111,7 +113,7 @@ static s32 igb_get_hw_semaphore_i210(struct e1000_hw *hw)
  *  Return successful if access grant bit set, else clear the request for
  *  EEPROM access and return -E1000_ERR_NVM (-1).
  **/
-s32 igb_acquire_nvm_i210(struct e1000_hw *hw)
+static s32 igb_acquire_nvm_i210(struct e1000_hw *hw)
 {
 	return igb_acquire_swfw_sync_i210(hw, E1000_SWFW_EEP_SM);
 }
@@ -123,7 +125,7 @@ s32 igb_acquire_nvm_i210(struct e1000_hw *hw)
  *  Stop any current commands to the EEPROM and clear the EEPROM request bit,
  *  then release the semaphores acquired.
  **/
-void igb_release_nvm_i210(struct e1000_hw *hw)
+static void igb_release_nvm_i210(struct e1000_hw *hw)
 {
 	igb_release_swfw_sync_i210(hw, E1000_SWFW_EEP_SM);
 }
@@ -206,8 +208,8 @@ void igb_release_swfw_sync_i210(struct e1000_hw *hw, u16 mask)
  *  Reads a 16 bit word from the Shadow Ram using the EERD register.
  *  Uses necessary synchronization semaphores.
  **/
-s32 igb_read_nvm_srrd_i210(struct e1000_hw *hw, u16 offset, u16 words,
-			     u16 *data)
+static s32 igb_read_nvm_srrd_i210(struct e1000_hw *hw, u16 offset, u16 words,
+				  u16 *data)
 {
 	s32 status = E1000_SUCCESS;
 	u16 i, count;
@@ -306,8 +308,8 @@ out:
  *  If error code is returned, data and Shadow RAM may be inconsistent - buffer
  *  partially written.
  **/
-s32 igb_write_nvm_srwr_i210(struct e1000_hw *hw, u16 offset, u16 words,
-			      u16 *data)
+static s32 igb_write_nvm_srwr_i210(struct e1000_hw *hw, u16 offset, u16 words,
+				   u16 *data)
 {
 	s32 status = E1000_SUCCESS;
 	u16 i, count;
@@ -555,7 +557,7 @@ s32 igb_read_invm_version(struct e1000_hw *hw,
  *  Calculates the EEPROM checksum by reading/adding each word of the EEPROM
  *  and then verifies that the sum of the EEPROM is equal to 0xBABA.
  **/
-s32 igb_validate_nvm_checksum_i210(struct e1000_hw *hw)
+static s32 igb_validate_nvm_checksum_i210(struct e1000_hw *hw)
 {
 	s32 status = E1000_SUCCESS;
 	s32 (*read_op_ptr)(struct e1000_hw *, u16, u16, u16 *);
@@ -590,7 +592,7 @@ s32 igb_validate_nvm_checksum_i210(struct e1000_hw *hw)
  *  up to the checksum.  Then calculates the EEPROM checksum and writes the
  *  value to the EEPROM. Next commit EEPROM data onto the Flash.
  **/
-s32 igb_update_nvm_checksum_i210(struct e1000_hw *hw)
+static s32 igb_update_nvm_checksum_i210(struct e1000_hw *hw)
 {
 	s32 ret_val = E1000_SUCCESS;
 	u16 checksum = 0;
@@ -684,7 +686,7 @@ bool igb_get_flash_presence_i210(struct e1000_hw *hw)
  *  @hw: pointer to the HW structure
  *
  **/
-s32 igb_update_flash_i210(struct e1000_hw *hw)
+static s32 igb_update_flash_i210(struct e1000_hw *hw)
 {
 	s32 ret_val = E1000_SUCCESS;
 	u32 flup;
diff --git a/drivers/net/ethernet/intel/igb/e1000_i210.h b/drivers/net/ethernet/intel/igb/e1000_i210.h
index 2d913716573a..a068866927e8 100644
--- a/drivers/net/ethernet/intel/igb/e1000_i210.h
+++ b/drivers/net/ethernet/intel/igb/e1000_i210.h
@@ -28,17 +28,8 @@
 #ifndef _E1000_I210_H_
 #define _E1000_I210_H_
 
-s32 igb_update_flash_i210(struct e1000_hw *hw);
-s32 igb_update_nvm_checksum_i210(struct e1000_hw *hw);
-s32 igb_validate_nvm_checksum_i210(struct e1000_hw *hw);
-s32 igb_write_nvm_srwr_i210(struct e1000_hw *hw, u16 offset, u16 words,
-			    u16 *data);
-s32 igb_read_nvm_srrd_i210(struct e1000_hw *hw, u16 offset, u16 words,
-			   u16 *data);
 s32 igb_acquire_swfw_sync_i210(struct e1000_hw *hw, u16 mask);
 void igb_release_swfw_sync_i210(struct e1000_hw *hw, u16 mask);
-s32 igb_acquire_nvm_i210(struct e1000_hw *hw);
-void igb_release_nvm_i210(struct e1000_hw *hw);
 s32 igb_valid_led_default_i210(struct e1000_hw *hw, u16 *data);
 s32 igb_read_invm_version(struct e1000_hw *hw,
 			  struct e1000_fw_version *invm_ver);
diff --git a/drivers/net/ethernet/intel/igb/e1000_phy.c b/drivers/net/ethernet/intel/igb/e1000_phy.c
index ad2b74d95138..c0f2a16d16dc 100644
--- a/drivers/net/ethernet/intel/igb/e1000_phy.c
+++ b/drivers/net/ethernet/intel/igb/e1000_phy.c
@@ -393,77 +393,6 @@ s32 igb_read_sfp_data_byte(struct e1000_hw *hw, u16 offset, u8 *data)
 	return 0;
 }
 
-/**
- *  e1000_write_sfp_data_byte - Writes SFP module data.
- *  @hw: pointer to the HW structure
- *  @offset: byte location offset to write to
- *  @data: data to write
- *
- *  Writes one byte to SFP module data stored
- *  in SFP resided EEPROM memory or SFP diagnostic area.
- *  Function should be called with
- *  E1000_I2CCMD_SFP_DATA_ADDR(<byte offset>) for SFP module database access
- *  E1000_I2CCMD_SFP_DIAG_ADDR(<byte offset>) for SFP diagnostics parameters
- *  access
- **/
-s32 e1000_write_sfp_data_byte(struct e1000_hw *hw, u16 offset, u8 data)
-{
-	u32 i = 0;
-	u32 i2ccmd = 0;
-	u32 data_local = 0;
-
-	if (offset > E1000_I2CCMD_SFP_DIAG_ADDR(255)) {
-		hw_dbg("I2CCMD command address exceeds upper limit\n");
-		return -E1000_ERR_PHY;
-	}
-	/* The programming interface is 16 bits wide
-	 * so we need to read the whole word first
-	 * then update appropriate byte lane and write
-	 * the updated word back.
-	 */
-	/* Set up Op-code, EEPROM Address,in the I2CCMD
-	 * register. The MAC will take care of interfacing
-	 * with an EEPROM to write the data given.
-	 */
-	i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) |
-		  E1000_I2CCMD_OPCODE_READ);
-	/* Set a command to read single word */
-	wr32(E1000_I2CCMD, i2ccmd);
-	for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) {
-		udelay(50);
-		/* Poll the ready bit to see if lastly
-		 * launched I2C operation completed
-		 */
-		i2ccmd = rd32(E1000_I2CCMD);
-		if (i2ccmd & E1000_I2CCMD_READY) {
-			/* Check if this is READ or WRITE phase */
-			if ((i2ccmd & E1000_I2CCMD_OPCODE_READ) ==
-			    E1000_I2CCMD_OPCODE_READ) {
-				/* Write the selected byte
-				 * lane and update whole word
-				 */
-				data_local = i2ccmd & 0xFF00;
-				data_local |= data;
-				i2ccmd = ((offset <<
-					E1000_I2CCMD_REG_ADDR_SHIFT) |
-					E1000_I2CCMD_OPCODE_WRITE | data_local);
-				wr32(E1000_I2CCMD, i2ccmd);
-			} else {
-				break;
-			}
-		}
-	}
-	if (!(i2ccmd & E1000_I2CCMD_READY)) {
-		hw_dbg("I2CCMD Write did not complete\n");
-		return -E1000_ERR_PHY;
-	}
-	if (i2ccmd & E1000_I2CCMD_ERROR) {
-		hw_dbg("I2CCMD Error bit set\n");
-		return -E1000_ERR_PHY;
-	}
-	return 0;
-}
-
 /**
  *  igb_read_phy_reg_igp - Read igp PHY register
  *  @hw: pointer to the HW structure
diff --git a/drivers/net/ethernet/intel/igb/e1000_phy.h b/drivers/net/ethernet/intel/igb/e1000_phy.h
index 6a0873f2095a..55b3f8c6f34c 100644
--- a/drivers/net/ethernet/intel/igb/e1000_phy.h
+++ b/drivers/net/ethernet/intel/igb/e1000_phy.h
@@ -70,7 +70,6 @@ s32  igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data);
 s32  igb_read_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 *data);
 s32  igb_write_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 data);
 s32  igb_read_sfp_data_byte(struct e1000_hw *hw, u16 offset, u8 *data);
-s32  e1000_write_sfp_data_byte(struct e1000_hw *hw, u16 offset, u8 data);
 s32  igb_copper_link_setup_82580(struct e1000_hw *hw);
 s32  igb_get_phy_info_82580(struct e1000_hw *hw);
 s32  igb_phy_force_speed_duplex_82580(struct e1000_hw *hw);
diff --git a/drivers/net/ethernet/intel/igb/igb.h b/drivers/net/ethernet/intel/igb/igb.h
index ccf472f073dd..65f3c774327d 100644
--- a/drivers/net/ethernet/intel/igb/igb.h
+++ b/drivers/net/ethernet/intel/igb/igb.h
@@ -525,9 +525,7 @@ void igb_set_fw_version(struct igb_adapter *);
 void igb_ptp_init(struct igb_adapter *adapter);
 void igb_ptp_stop(struct igb_adapter *adapter);
 void igb_ptp_reset(struct igb_adapter *adapter);
-void igb_ptp_tx_work(struct work_struct *work);
 void igb_ptp_rx_hang(struct igb_adapter *adapter);
-void igb_ptp_tx_hwtstamp(struct igb_adapter *adapter);
 void igb_ptp_rx_rgtstamp(struct igb_q_vector *q_vector, struct sk_buff *skb);
 void igb_ptp_rx_pktstamp(struct igb_q_vector *q_vector, unsigned char *va,
 			 struct sk_buff *skb);
diff --git a/drivers/net/ethernet/intel/igb/igb_ptp.c b/drivers/net/ethernet/intel/igb/igb_ptp.c
index 5a54e3dc535d..d9f3976ee47e 100644
--- a/drivers/net/ethernet/intel/igb/igb_ptp.c
+++ b/drivers/net/ethernet/intel/igb/igb_ptp.c
@@ -75,6 +75,8 @@
 #define INCVALUE_82576			(16 << IGB_82576_TSYNC_SHIFT)
 #define IGB_NBITS_82580			40
 
+static void igb_ptp_tx_hwtstamp(struct igb_adapter *adapter);
+
 /* SYSTIM read access for the 82576 */
 static cycle_t igb_ptp_read_82576(const struct cyclecounter *cc)
 {
@@ -372,7 +374,7 @@ static int igb_ptp_enable(struct ptp_clock_info *ptp,
  * This work function polls the TSYNCTXCTL valid bit to determine when a
  * timestamp has been taken for the current stored skb.
  **/
-void igb_ptp_tx_work(struct work_struct *work)
+static void igb_ptp_tx_work(struct work_struct *work)
 {
 	struct igb_adapter *adapter = container_of(work, struct igb_adapter,
 						   ptp_tx_work);
@@ -466,7 +468,7 @@ void igb_ptp_rx_hang(struct igb_adapter *adapter)
  * available, then it must have been for this skb here because we only
  * allow only one such packet into the queue.
  **/
-void igb_ptp_tx_hwtstamp(struct igb_adapter *adapter)
+static void igb_ptp_tx_hwtstamp(struct igb_adapter *adapter)
 {
 	struct e1000_hw *hw = &adapter->hw;
 	struct skb_shared_hwtstamps shhwtstamps;
-- 
cgit v1.2.2


From 74cfb2e1f296b3f962016adf41b316b8cf7d4ed4 Mon Sep 17 00:00:00 2001
From: Carolyn Wyborny <carolyn.wyborny@intel.com>
Date: Tue, 25 Feb 2014 17:58:57 -0800
Subject: igb: Update license text to remove FSF address and update copyright.

This patch updates the license text to remove address of Free Software
Foundation and refer  users to www.gnu.org instead. This patch also updates
the copyright dates in appropriate igb driver files.

Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/igb/Makefile        | 5 ++---
 drivers/net/ethernet/intel/igb/e1000_82575.c   | 5 ++---
 drivers/net/ethernet/intel/igb/e1000_82575.h   | 5 ++---
 drivers/net/ethernet/intel/igb/e1000_defines.h | 5 ++---
 drivers/net/ethernet/intel/igb/e1000_hw.h      | 5 ++---
 drivers/net/ethernet/intel/igb/e1000_i210.c    | 5 ++---
 drivers/net/ethernet/intel/igb/e1000_i210.h    | 5 ++---
 drivers/net/ethernet/intel/igb/e1000_mac.c     | 5 ++---
 drivers/net/ethernet/intel/igb/e1000_mac.h     | 5 ++---
 drivers/net/ethernet/intel/igb/e1000_mbx.c     | 5 ++---
 drivers/net/ethernet/intel/igb/e1000_mbx.h     | 5 ++---
 drivers/net/ethernet/intel/igb/e1000_nvm.c     | 5 ++---
 drivers/net/ethernet/intel/igb/e1000_nvm.h     | 5 ++---
 drivers/net/ethernet/intel/igb/e1000_phy.c     | 5 ++---
 drivers/net/ethernet/intel/igb/e1000_phy.h     | 5 ++---
 drivers/net/ethernet/intel/igb/e1000_regs.h    | 5 ++---
 drivers/net/ethernet/intel/igb/igb.h           | 5 ++---
 drivers/net/ethernet/intel/igb/igb_ethtool.c   | 5 ++---
 drivers/net/ethernet/intel/igb/igb_hwmon.c     | 5 ++---
 drivers/net/ethernet/intel/igb/igb_main.c      | 7 +++----
 drivers/net/ethernet/intel/igb/igb_ptp.c       | 5 ++---
 21 files changed, 43 insertions(+), 64 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/igb/Makefile b/drivers/net/ethernet/intel/igb/Makefile
index f19700e285bb..5bcb2de75933 100644
--- a/drivers/net/ethernet/intel/igb/Makefile
+++ b/drivers/net/ethernet/intel/igb/Makefile
@@ -1,7 +1,7 @@
 ################################################################################
 #
 # Intel 82575 PCI-Express Ethernet Linux driver
-# Copyright(c) 1999 - 2013 Intel Corporation.
+# Copyright(c) 1999 - 2014 Intel Corporation.
 #
 # This program is free software; you can redistribute it and/or modify it
 # under the terms and conditions of the GNU General Public License,
@@ -13,8 +13,7 @@
 # more details.
 #
 # You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+# this program; if not, see <http://www.gnu.org/licenses/>.
 #
 # The full GNU General Public License is included in this distribution in
 # the file called "COPYING".
diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c
index 0ee7049157b0..45947b3f7d92 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel(R) Gigabit Ethernet Linux driver
-  Copyright(c) 2007-2013 Intel Corporation.
+  Copyright(c) 2007-2014 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -13,8 +13,7 @@
   more details.
 
   You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc.,
-  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+  this program; if not, see <http://www.gnu.org/licenses/>.
 
   The full GNU General Public License is included in this distribution in
   the file called "COPYING".
diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.h b/drivers/net/ethernet/intel/igb/e1000_82575.h
index 622d80d59e2b..f12b086e578d 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.h
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.h
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel(R) Gigabit Ethernet Linux driver
-  Copyright(c) 2007-2013 Intel Corporation.
+  Copyright(c) 2007-2014 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -13,8 +13,7 @@
   more details.
 
   You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc.,
-  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+  this program; if not, see <http://www.gnu.org/licenses/>.
 
   The full GNU General Public License is included in this distribution in
   the file called "COPYING".
diff --git a/drivers/net/ethernet/intel/igb/e1000_defines.h b/drivers/net/ethernet/intel/igb/e1000_defines.h
index 0571b973be80..393c896ac7e7 100644
--- a/drivers/net/ethernet/intel/igb/e1000_defines.h
+++ b/drivers/net/ethernet/intel/igb/e1000_defines.h
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel(R) Gigabit Ethernet Linux driver
-  Copyright(c) 2007-2013 Intel Corporation.
+  Copyright(c) 2007-2014 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -13,8 +13,7 @@
   more details.
 
   You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc.,
-  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+  this program; if not, see <http://www.gnu.org/licenses/>.
 
   The full GNU General Public License is included in this distribution in
   the file called "COPYING".
diff --git a/drivers/net/ethernet/intel/igb/e1000_hw.h b/drivers/net/ethernet/intel/igb/e1000_hw.h
index ab99e2b582a8..10741d170f2d 100644
--- a/drivers/net/ethernet/intel/igb/e1000_hw.h
+++ b/drivers/net/ethernet/intel/igb/e1000_hw.h
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel(R) Gigabit Ethernet Linux driver
-  Copyright(c) 2007-2013 Intel Corporation.
+  Copyright(c) 2007-2014 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -13,8 +13,7 @@
   more details.
 
   You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc.,
-  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+  this program; if not, see <http://www.gnu.org/licenses/>.
 
   The full GNU General Public License is included in this distribution in
   the file called "COPYING".
diff --git a/drivers/net/ethernet/intel/igb/e1000_i210.c b/drivers/net/ethernet/intel/igb/e1000_i210.c
index 9f32c781c474..db963397cc27 100644
--- a/drivers/net/ethernet/intel/igb/e1000_i210.c
+++ b/drivers/net/ethernet/intel/igb/e1000_i210.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel(R) Gigabit Ethernet Linux driver
-  Copyright(c) 2007-2013 Intel Corporation.
+  Copyright(c) 2007-2014 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -13,8 +13,7 @@
   more details.
 
   You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc.,
-  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+  this program; if not, see <http://www.gnu.org/licenses/>.
 
   The full GNU General Public License is included in this distribution in
   the file called "COPYING".
diff --git a/drivers/net/ethernet/intel/igb/e1000_i210.h b/drivers/net/ethernet/intel/igb/e1000_i210.h
index a068866927e8..907fe99a9813 100644
--- a/drivers/net/ethernet/intel/igb/e1000_i210.h
+++ b/drivers/net/ethernet/intel/igb/e1000_i210.h
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel(R) Gigabit Ethernet Linux driver
-  Copyright(c) 2007-2013 Intel Corporation.
+  Copyright(c) 2007-2014 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -13,8 +13,7 @@
   more details.
 
   You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc.,
-  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+  this program; if not, see <http://www.gnu.org/licenses/>.
 
   The full GNU General Public License is included in this distribution in
   the file called "COPYING".
diff --git a/drivers/net/ethernet/intel/igb/e1000_mac.c b/drivers/net/ethernet/intel/igb/e1000_mac.c
index 298f0ed50670..5910a932ea7c 100644
--- a/drivers/net/ethernet/intel/igb/e1000_mac.c
+++ b/drivers/net/ethernet/intel/igb/e1000_mac.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel(R) Gigabit Ethernet Linux driver
-  Copyright(c) 2007-2013 Intel Corporation.
+  Copyright(c) 2007-2014 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -13,8 +13,7 @@
   more details.
 
   You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc.,
-  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+  this program; if not, see <http://www.gnu.org/licenses/>.
 
   The full GNU General Public License is included in this distribution in
   the file called "COPYING".
diff --git a/drivers/net/ethernet/intel/igb/e1000_mac.h b/drivers/net/ethernet/intel/igb/e1000_mac.h
index e4cbe8ef67b3..99299ba8ee3a 100644
--- a/drivers/net/ethernet/intel/igb/e1000_mac.h
+++ b/drivers/net/ethernet/intel/igb/e1000_mac.h
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel(R) Gigabit Ethernet Linux driver
-  Copyright(c) 2007-2013 Intel Corporation.
+  Copyright(c) 2007-2014 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -13,8 +13,7 @@
   more details.
 
   You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc.,
-  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+  this program; if not, see <http://www.gnu.org/licenses/>.
 
   The full GNU General Public License is included in this distribution in
   the file called "COPYING".
diff --git a/drivers/net/ethernet/intel/igb/e1000_mbx.c b/drivers/net/ethernet/intel/igb/e1000_mbx.c
index dac1447fabf7..d5b121771c31 100644
--- a/drivers/net/ethernet/intel/igb/e1000_mbx.c
+++ b/drivers/net/ethernet/intel/igb/e1000_mbx.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel(R) Gigabit Ethernet Linux driver
-  Copyright(c) 2007-2013 Intel Corporation.
+  Copyright(c) 2007-2014 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -13,8 +13,7 @@
   more details.
 
   You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc.,
-  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+  this program; if not, see <http://www.gnu.org/licenses/>.
 
   The full GNU General Public License is included in this distribution in
   the file called "COPYING".
diff --git a/drivers/net/ethernet/intel/igb/e1000_mbx.h b/drivers/net/ethernet/intel/igb/e1000_mbx.h
index de9bba41acf3..f52f5515e5a8 100644
--- a/drivers/net/ethernet/intel/igb/e1000_mbx.h
+++ b/drivers/net/ethernet/intel/igb/e1000_mbx.h
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel(R) Gigabit Ethernet Linux driver
-  Copyright(c) 2007-2013 Intel Corporation.
+  Copyright(c) 2007-2014 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -13,8 +13,7 @@
   more details.
 
   You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc.,
-  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+  this program; if not, see <http://www.gnu.org/licenses/>.
 
   The full GNU General Public License is included in this distribution in
   the file called "COPYING".
diff --git a/drivers/net/ethernet/intel/igb/e1000_nvm.c b/drivers/net/ethernet/intel/igb/e1000_nvm.c
index a7db7f3db914..9abf82919c65 100644
--- a/drivers/net/ethernet/intel/igb/e1000_nvm.c
+++ b/drivers/net/ethernet/intel/igb/e1000_nvm.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel(R) Gigabit Ethernet Linux driver
-  Copyright(c) 2007-2013 Intel Corporation.
+  Copyright(c) 2007-2014 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -13,8 +13,7 @@
   more details.
 
   You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc.,
-  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+  this program; if not, see <http://www.gnu.org/licenses/>.
 
   The full GNU General Public License is included in this distribution in
   the file called "COPYING".
diff --git a/drivers/net/ethernet/intel/igb/e1000_nvm.h b/drivers/net/ethernet/intel/igb/e1000_nvm.h
index 433b7419cb98..5b101170b17e 100644
--- a/drivers/net/ethernet/intel/igb/e1000_nvm.h
+++ b/drivers/net/ethernet/intel/igb/e1000_nvm.h
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel(R) Gigabit Ethernet Linux driver
-  Copyright(c) 2013 Intel Corporation.
+  Copyright(c) 2007-2014 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -13,8 +13,7 @@
   more details.
 
   You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc.,
-  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+  this program; if not, see <http://www.gnu.org/licenses/>.
 
   The full GNU General Public License is included in this distribution in
   the file called "COPYING".
diff --git a/drivers/net/ethernet/intel/igb/e1000_phy.c b/drivers/net/ethernet/intel/igb/e1000_phy.c
index c0f2a16d16dc..4009bbab7407 100644
--- a/drivers/net/ethernet/intel/igb/e1000_phy.c
+++ b/drivers/net/ethernet/intel/igb/e1000_phy.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel(R) Gigabit Ethernet Linux driver
-  Copyright(c) 2007-2013 Intel Corporation.
+  Copyright(c) 2007-2014 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -13,8 +13,7 @@
   more details.
 
   You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc.,
-  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+  this program; if not, see <http://www.gnu.org/licenses/>.
 
   The full GNU General Public License is included in this distribution in
   the file called "COPYING".
diff --git a/drivers/net/ethernet/intel/igb/e1000_phy.h b/drivers/net/ethernet/intel/igb/e1000_phy.h
index 55b3f8c6f34c..4c2c36c46a73 100644
--- a/drivers/net/ethernet/intel/igb/e1000_phy.h
+++ b/drivers/net/ethernet/intel/igb/e1000_phy.h
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel(R) Gigabit Ethernet Linux driver
-  Copyright(c) 2007-2013 Intel Corporation.
+  Copyright(c) 2007-2014 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -13,8 +13,7 @@
   more details.
 
   You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc.,
-  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+  this program; if not, see <http://www.gnu.org/licenses/>.
 
   The full GNU General Public License is included in this distribution in
   the file called "COPYING".
diff --git a/drivers/net/ethernet/intel/igb/e1000_regs.h b/drivers/net/ethernet/intel/igb/e1000_regs.h
index 82632c6c53af..abdd935a9dad 100644
--- a/drivers/net/ethernet/intel/igb/e1000_regs.h
+++ b/drivers/net/ethernet/intel/igb/e1000_regs.h
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel(R) Gigabit Ethernet Linux driver
-  Copyright(c) 2007-2013 Intel Corporation.
+  Copyright(c) 2007-2014 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -13,8 +13,7 @@
   more details.
 
   You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc.,
-  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+  this program; if not, see <http://www.gnu.org/licenses/>.
 
   The full GNU General Public License is included in this distribution in
   the file called "COPYING".
diff --git a/drivers/net/ethernet/intel/igb/igb.h b/drivers/net/ethernet/intel/igb/igb.h
index 65f3c774327d..fc3fc2c6fe40 100644
--- a/drivers/net/ethernet/intel/igb/igb.h
+++ b/drivers/net/ethernet/intel/igb/igb.h
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel(R) Gigabit Ethernet Linux driver
-  Copyright(c) 2007-2013 Intel Corporation.
+  Copyright(c) 2007-2014 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -13,8 +13,7 @@
   more details.
 
   You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc.,
-  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+  this program; if not, see <http://www.gnu.org/licenses/>.
 
   The full GNU General Public License is included in this distribution in
   the file called "COPYING".
diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c
index 1df02378de69..c7f574165298 100644
--- a/drivers/net/ethernet/intel/igb/igb_ethtool.c
+++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel(R) Gigabit Ethernet Linux driver
-  Copyright(c) 2007-2013 Intel Corporation.
+  Copyright(c) 2007-2014 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -13,8 +13,7 @@
   more details.
 
   You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc.,
-  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+  this program; if not, see <http://www.gnu.org/licenses/>.
 
   The full GNU General Public License is included in this distribution in
   the file called "COPYING".
diff --git a/drivers/net/ethernet/intel/igb/igb_hwmon.c b/drivers/net/ethernet/intel/igb/igb_hwmon.c
index e0af5bc61613..8333f67acf96 100644
--- a/drivers/net/ethernet/intel/igb/igb_hwmon.c
+++ b/drivers/net/ethernet/intel/igb/igb_hwmon.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel(R) Gigabit Ethernet Linux driver
-  Copyright(c) 2007-2013 Intel Corporation.
+  Copyright(c) 2007-2014 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -13,8 +13,7 @@
   more details.
 
   You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc.,
-  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+  this program; if not, see <http://www.gnu.org/licenses/>.
 
   The full GNU General Public License is included in this distribution in
   the file called "COPYING".
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 84dfa3f0e3b8..3384156cf1b5 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel(R) Gigabit Ethernet Linux driver
-  Copyright(c) 2007-2013 Intel Corporation.
+  Copyright(c) 2007-2014 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -13,8 +13,7 @@
   more details.
 
   You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc.,
-  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+  this program; if not, see <http://www.gnu.org/licenses/>.
 
   The full GNU General Public License is included in this distribution in
   the file called "COPYING".
@@ -70,7 +69,7 @@ char igb_driver_version[] = DRV_VERSION;
 static const char igb_driver_string[] =
 				"Intel(R) Gigabit Ethernet Network Driver";
 static const char igb_copyright[] =
-				"Copyright (c) 2007-2013 Intel Corporation.";
+				"Copyright (c) 2007-2014 Intel Corporation.";
 
 static const struct e1000_info *igb_info_tbl[] = {
 	[board_82575] = &e1000_82575_info,
diff --git a/drivers/net/ethernet/intel/igb/igb_ptp.c b/drivers/net/ethernet/intel/igb/igb_ptp.c
index d9f3976ee47e..9c9c141f089a 100644
--- a/drivers/net/ethernet/intel/igb/igb_ptp.c
+++ b/drivers/net/ethernet/intel/igb/igb_ptp.c
@@ -12,9 +12,8 @@
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, see <http://www.gnu.org/licenses/>.
  */
 #include <linux/module.h>
 #include <linux/device.h>
-- 
cgit v1.2.2


From 20d8435a1cffa04992f1db6b199a5f0ccec2ff06 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben.dooks@codethink.co.uk>
Date: Wed, 26 Feb 2014 11:48:00 +0000
Subject: phy: micrel: add of configuration for LED mode

Add support for the led-mode property for the following PHYs
which have a single LED mode configuration value.

KSZ8001 and KSZ8041 which both use register 0x1e bits 15,14 and
KSZ8021, KSZ8031 and KSZ8051 which use register 0x1f bits 5,4
to control the LED configuration.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/micrel.c | 49 ++++++++++++++++++++++++++++++++++++++++++++----
 1 file changed, 45 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 5a8993b0cafc..0c9e4342f11d 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -148,15 +148,52 @@ static int ks8737_config_intr(struct phy_device *phydev)
 	return rc < 0 ? rc : 0;
 }
 
+static int kszphy_setup_led(struct phy_device *phydev,
+			    unsigned int reg, unsigned int shift)
+{
+
+	struct device *dev = &phydev->dev;
+	struct device_node *of_node = dev->of_node;
+	int rc, temp;
+	u32 val;
+
+	if (!of_node && dev->parent->of_node)
+		of_node = dev->parent->of_node;
+
+	if (of_property_read_u32(of_node, "micrel,led-mode", &val))
+		return 0;
+
+	temp = phy_read(phydev, reg);
+	if (temp < 0)
+		return temp;
+
+	temp &= 3 << shift;
+	temp |= val << shift;
+	rc = phy_write(phydev, reg, temp);
+
+	return rc < 0 ? rc : 0;
+}
+
 static int kszphy_config_init(struct phy_device *phydev)
 {
 	return 0;
 }
 
+static int kszphy_config_init_led8041(struct phy_device *phydev)
+{
+	/* single led control, register 0x1e bits 15..14 */
+	return kszphy_setup_led(phydev, 0x1e, 14);
+}
+
 static int ksz8021_config_init(struct phy_device *phydev)
 {
-	int rc;
 	const u16 val = KSZPHY_OMSO_B_CAST_OFF | KSZPHY_OMSO_RMII_OVERRIDE;
+	int rc;
+
+	rc = kszphy_setup_led(phydev, 0x1f, 4);
+	if (rc)
+		dev_err(&phydev->dev, "failed to set led mode\n");
+
 	phy_write(phydev, MII_KSZPHY_OMSO, val);
 	rc = ksz_config_flags(phydev);
 	return rc < 0 ? rc : 0;
@@ -166,6 +203,10 @@ static int ks8051_config_init(struct phy_device *phydev)
 {
 	int rc;
 
+	rc = kszphy_setup_led(phydev, 0x1f, 4);
+	if (rc)
+		dev_err(&phydev->dev, "failed to set led mode\n");
+
 	rc = ksz_config_flags(phydev);
 	return rc < 0 ? rc : 0;
 }
@@ -327,7 +368,7 @@ static struct phy_driver ksphy_driver[] = {
 	.features	= (PHY_BASIC_FEATURES | SUPPORTED_Pause
 				| SUPPORTED_Asym_Pause),
 	.flags		= PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
-	.config_init	= kszphy_config_init,
+	.config_init	= kszphy_config_init_led8041,
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= kszphy_ack_interrupt,
@@ -342,7 +383,7 @@ static struct phy_driver ksphy_driver[] = {
 	.features	= PHY_BASIC_FEATURES |
 			  SUPPORTED_Pause | SUPPORTED_Asym_Pause,
 	.flags		= PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
-	.config_init	= kszphy_config_init,
+	.config_init	= kszphy_config_init_led8041,
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= kszphy_ack_interrupt,
@@ -371,7 +412,7 @@ static struct phy_driver ksphy_driver[] = {
 	.phy_id_mask	= 0x00ffffff,
 	.features	= (PHY_BASIC_FEATURES | SUPPORTED_Pause),
 	.flags		= PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
-	.config_init	= kszphy_config_init,
+	.config_init	= kszphy_config_init_led8041,
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= kszphy_ack_interrupt,
-- 
cgit v1.2.2


From e72698f8a95f16ca764b62b609c50e3423e2a584 Mon Sep 17 00:00:00 2001
From: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
Date: Wed, 26 Feb 2014 18:42:05 +0200
Subject: ath10k: set the mactime of ieee80211_rx_status

Retrieve the mactime of ieee80211_rx_status based on received
data frame. The value is obtained from the htt_rx_indication_ppdu
structure and only available in 32-bit.

kvalo: white space fixes

Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/htt.h    | 2 ++
 drivers/net/wireless/ath/ath10k/htt_rx.c | 1 +
 drivers/net/wireless/ath/ath10k/txrx.c   | 6 ++++++
 3 files changed, 9 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath10k/htt.h b/drivers/net/wireless/ath/ath10k/htt.h
index b93ae355bc08..02c009d227a4 100644
--- a/drivers/net/wireless/ath/ath10k/htt.h
+++ b/drivers/net/wireless/ath/ath10k/htt.h
@@ -1181,6 +1181,8 @@ struct htt_rx_info {
 		u32 info1;
 		u32 info2;
 	} rate;
+
+	u32 tsf;
 	bool fcs_err;
 	bool amsdu_more;
 	bool mic_err;
diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index 040a85418599..fcd00f639e13 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -996,6 +996,7 @@ static void ath10k_htt_rx_handler(struct ath10k_htt *htt,
 			info.rate.info0 = rx->ppdu.info0;
 			info.rate.info1 = __le32_to_cpu(rx->ppdu.info1);
 			info.rate.info2 = __le32_to_cpu(rx->ppdu.info2);
+			info.tsf = __le32_to_cpu(rx->ppdu.tsf);
 
 			hdr = ath10k_htt_rx_skb_get_hdr(msdu_head);
 
diff --git a/drivers/net/wireless/ath/ath10k/txrx.c b/drivers/net/wireless/ath/ath10k/txrx.c
index 8271df2eb21d..dcf7efdc1825 100644
--- a/drivers/net/wireless/ath/ath10k/txrx.c
+++ b/drivers/net/wireless/ath/ath10k/txrx.c
@@ -258,6 +258,12 @@ void ath10k_process_rx(struct ath10k *ar, struct htt_rx_info *info)
 	status->band = ch->band;
 	status->freq = ch->center_freq;
 
+	if (info->rate.info0 & HTT_RX_INDICATION_INFO0_END_VALID) {
+		/* TSF available only in 32-bit */
+		status->mactime = info->tsf & 0xffffffff;
+		status->flag |= RX_FLAG_MACTIME_END;
+	}
+
 	ath10k_dbg(ATH10K_DBG_DATA,
 		   "rx skb %p len %u %s%s%s%s%s %srate_idx %u vht_nss %u freq %u band %u flag 0x%x fcs-err %i\n",
 		   info->skb,
-- 
cgit v1.2.2


From 2f0f112111f5d635699026d1d6a2fe144eabb489 Mon Sep 17 00:00:00 2001
From: Janusz Dziedzic <janusz.dziedzic@tieto.com>
Date: Wed, 26 Feb 2014 18:42:09 +0200
Subject: ath10k: enable spectrum management support

Indicate spectrum management support in hardware
flags, while we already handle power set
(IEEE80211_CONF_CHANGE_POWER) in the ath10k driver.
This enable 802.11h support for station mode.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/mac.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 27466d83ea86..0423af2100e9 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -4457,7 +4457,8 @@ int ath10k_mac_register(struct ath10k *ar)
 			IEEE80211_HW_HAS_RATE_CONTROL |
 			IEEE80211_HW_SUPPORTS_STATIC_SMPS |
 			IEEE80211_HW_WANT_MONITOR_VIF |
-			IEEE80211_HW_AP_LINK_PS;
+			IEEE80211_HW_AP_LINK_PS |
+			IEEE80211_HW_SPECTRUM_MGMT;
 
 	/* MSDU can have HTT TX fragment pushed in front. The additional 4
 	 * bytes is used for padding/alignment if necessary. */
-- 
cgit v1.2.2


From 9f81f72556107a38ebf523ea1d38ef85dfa35d09 Mon Sep 17 00:00:00 2001
From: Janusz Dziedzic <janusz.dziedzic@tieto.com>
Date: Fri, 17 Jan 2014 20:04:14 +0100
Subject: ath10k: bitrate_mask add force_sgi support

Add force SGI support.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/core.h |  1 +
 drivers/net/wireless/ath/ath10k/mac.c  | 35 +++++++++++++++++++++++++++++++---
 2 files changed, 33 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 1fc26fe057e8..d1c5e7a49e72 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -288,6 +288,7 @@ struct ath10k_vif {
 
 	u8 fixed_rate;
 	u8 fixed_nss;
+	u8 force_sgi;
 };
 
 struct ath10k_vif_iter {
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 0423af2100e9..239357fb4175 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -3909,7 +3909,8 @@ static bool ath10k_get_fixed_rate_nss(const struct cfg80211_bitrate_mask *mask,
 
 static int ath10k_set_fixed_rate_param(struct ath10k_vif *arvif,
 				       u8 fixed_rate,
-				       u8 fixed_nss)
+				       u8 fixed_nss,
+				       u8 force_sgi)
 {
 	struct ath10k *ar = arvif->ar;
 	u32 vdev_param;
@@ -3918,12 +3919,16 @@ static int ath10k_set_fixed_rate_param(struct ath10k_vif *arvif,
 	mutex_lock(&ar->conf_mutex);
 
 	if (arvif->fixed_rate == fixed_rate &&
-	    arvif->fixed_nss == fixed_nss)
+	    arvif->fixed_nss == fixed_nss &&
+	    arvif->force_sgi == force_sgi)
 		goto exit;
 
 	if (fixed_rate == WMI_FIXED_RATE_NONE)
 		ath10k_dbg(ATH10K_DBG_MAC, "mac disable fixed bitrate mask\n");
 
+	if (force_sgi)
+		ath10k_dbg(ATH10K_DBG_MAC, "mac force sgi\n");
+
 	vdev_param = ar->wmi.vdev_param->fixed_rate;
 	ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
 					vdev_param, fixed_rate);
@@ -3949,6 +3954,19 @@ static int ath10k_set_fixed_rate_param(struct ath10k_vif *arvif,
 
 	arvif->fixed_nss = fixed_nss;
 
+	vdev_param = ar->wmi.vdev_param->sgi;
+	ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
+					force_sgi);
+
+	if (ret) {
+		ath10k_warn("Could not set sgi param %d: %d\n",
+			    force_sgi, ret);
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	arvif->force_sgi = force_sgi;
+
 exit:
 	mutex_unlock(&ar->conf_mutex);
 	return ret;
@@ -3963,6 +3981,11 @@ static int ath10k_set_bitrate_mask(struct ieee80211_hw *hw,
 	enum ieee80211_band band = ar->hw->conf.chandef.chan->band;
 	u8 fixed_rate = WMI_FIXED_RATE_NONE;
 	u8 fixed_nss = ar->num_rf_chains;
+	u8 force_sgi;
+
+	force_sgi = mask->control[band].gi;
+	if (force_sgi == NL80211_TXRATE_FORCE_LGI)
+		return -EINVAL;
 
 	if (!ath10k_default_bitrate_mask(ar, band, mask)) {
 		if (!ath10k_get_fixed_rate_nss(mask, band,
@@ -3971,7 +3994,13 @@ static int ath10k_set_bitrate_mask(struct ieee80211_hw *hw,
 			return -EINVAL;
 	}
 
-	return ath10k_set_fixed_rate_param(arvif, fixed_rate, fixed_nss);
+	if (fixed_rate == WMI_FIXED_RATE_NONE && force_sgi) {
+		ath10k_warn("Could not force SGI usage for default rate settings\n");
+		return -EINVAL;
+	}
+
+	return ath10k_set_fixed_rate_param(arvif, fixed_rate,
+					   fixed_nss, force_sgi);
 }
 
 static void ath10k_channel_switch_beacon(struct ieee80211_hw *hw,
-- 
cgit v1.2.2


From a80ddb003a24d10a87e3fbfc2d8e46c54698b585 Mon Sep 17 00:00:00 2001
From: Janusz Dziedzic <janusz.dziedzic@tieto.com>
Date: Tue, 25 Feb 2014 07:56:39 +0100
Subject: ath10k: skip management frames in HTT path

After we pass frames with INV_PEER to upper layer in commit 716ae53c56cf
("ath10k: pass frames with invalid peer status to upper layer") we could pass
some management frames (in case INVALID_PEER and MGMT_CTRL) twice to upper
layer, once via WMI and once via HTT. Next we could handle assoc request twice.
This patch remove such regression.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/htt_rx.c | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index fcd00f639e13..23d909555e58 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -852,6 +852,20 @@ static bool ath10k_htt_rx_has_mic_err(struct sk_buff *skb)
 	return false;
 }
 
+static bool ath10k_htt_rx_is_mgmt(struct sk_buff *skb)
+{
+	struct htt_rx_desc *rxd;
+	u32 flags;
+
+	rxd = (void *)skb->data - sizeof(*rxd);
+	flags = __le32_to_cpu(rxd->attention.flags);
+
+	if (flags & RX_ATTENTION_FLAGS_MGMT_TYPE)
+		return true;
+
+	return false;
+}
+
 static int ath10k_htt_rx_get_csum_state(struct sk_buff *skb)
 {
 	struct htt_rx_desc *rxd;
@@ -946,7 +960,8 @@ static void ath10k_htt_rx_handler(struct ath10k_htt *htt,
 			status = info.status;
 
 			/* Skip mgmt frames while we handle this in WMI */
-			if (status == HTT_RX_IND_MPDU_STATUS_MGMT_CTRL) {
+			if (status == HTT_RX_IND_MPDU_STATUS_MGMT_CTRL ||
+			    ath10k_htt_rx_is_mgmt(msdu_head)) {
 				ath10k_dbg(ATH10K_DBG_HTT, "htt rx mgmt ctrl\n");
 				ath10k_htt_rx_free_msdu_chain(msdu_head);
 				continue;
-- 
cgit v1.2.2


From 767d34fc67af3939b8ec09804e2b60a1daf94945 Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Thu, 27 Feb 2014 18:50:03 +0200
Subject: ath10k: remove DMA mapping wrappers

There's no real benefit from using them. DMA-API
already provides debugging. Some skbuffs are
already mapped directly with DMA-API since wrapper
arguments were insufficient and extending them
would be pointless.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/core.h   | 27 ---------------------------
 drivers/net/wireless/ath/ath10k/htc.c    | 11 ++++++++---
 drivers/net/wireless/ath/ath10k/htt_tx.c | 12 ++++++++----
 drivers/net/wireless/ath/ath10k/mac.c    |  4 +++-
 drivers/net/wireless/ath/ath10k/txrx.c   |  5 +----
 drivers/net/wireless/ath/ath10k/wmi.c    | 17 ++++++++++++++---
 6 files changed, 34 insertions(+), 42 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index d1c5e7a49e72..be7d75040aad 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -62,7 +62,6 @@ struct ath10k;
 
 struct ath10k_skb_cb {
 	dma_addr_t paddr;
-	bool is_mapped;
 	bool is_aborted;
 	u8 vdev_id;
 
@@ -87,32 +86,6 @@ static inline struct ath10k_skb_cb *ATH10K_SKB_CB(struct sk_buff *skb)
 	return (struct ath10k_skb_cb *)&IEEE80211_SKB_CB(skb)->driver_data;
 }
 
-static inline int ath10k_skb_map(struct device *dev, struct sk_buff *skb)
-{
-	if (ATH10K_SKB_CB(skb)->is_mapped)
-		return -EINVAL;
-
-	ATH10K_SKB_CB(skb)->paddr = dma_map_single(dev, skb->data, skb->len,
-						   DMA_TO_DEVICE);
-
-	if (unlikely(dma_mapping_error(dev, ATH10K_SKB_CB(skb)->paddr)))
-		return -EIO;
-
-	ATH10K_SKB_CB(skb)->is_mapped = true;
-	return 0;
-}
-
-static inline int ath10k_skb_unmap(struct device *dev, struct sk_buff *skb)
-{
-	if (!ATH10K_SKB_CB(skb)->is_mapped)
-		return -EINVAL;
-
-	dma_unmap_single(dev, ATH10K_SKB_CB(skb)->paddr, skb->len,
-			 DMA_TO_DEVICE);
-	ATH10K_SKB_CB(skb)->is_mapped = false;
-	return 0;
-}
-
 static inline u32 host_interest_item_address(u32 item_offset)
 {
 	return QCA988X_HOST_INTEREST_ADDRESS + item_offset;
diff --git a/drivers/net/wireless/ath/ath10k/htc.c b/drivers/net/wireless/ath/ath10k/htc.c
index edc57ab505c8..69f1f4696c25 100644
--- a/drivers/net/wireless/ath/ath10k/htc.c
+++ b/drivers/net/wireless/ath/ath10k/htc.c
@@ -63,7 +63,9 @@ static struct sk_buff *ath10k_htc_build_tx_ctrl_skb(void *ar)
 static inline void ath10k_htc_restore_tx_skb(struct ath10k_htc *htc,
 					     struct sk_buff *skb)
 {
-	ath10k_skb_unmap(htc->ar->dev, skb);
+	struct ath10k_skb_cb *skb_cb = ATH10K_SKB_CB(skb);
+
+	dma_unmap_single(htc->ar->dev, skb_cb->paddr, skb->len, DMA_TO_DEVICE);
 	skb_pull(skb, sizeof(struct ath10k_htc_hdr));
 }
 
@@ -122,6 +124,8 @@ int ath10k_htc_send(struct ath10k_htc *htc,
 		    struct sk_buff *skb)
 {
 	struct ath10k_htc_ep *ep = &htc->endpoint[eid];
+	struct ath10k_skb_cb *skb_cb = ATH10K_SKB_CB(skb);
+	struct device *dev = htc->ar->dev;
 	int credits = 0;
 	int ret;
 
@@ -157,7 +161,8 @@ int ath10k_htc_send(struct ath10k_htc *htc,
 
 	ath10k_htc_prepare_tx_skb(ep, skb);
 
-	ret = ath10k_skb_map(htc->ar->dev, skb);
+	skb_cb->paddr = dma_map_single(dev, skb->data, skb->len, DMA_TO_DEVICE);
+	ret = dma_mapping_error(dev, skb_cb->paddr);
 	if (ret)
 		goto err_credits;
 
@@ -169,7 +174,7 @@ int ath10k_htc_send(struct ath10k_htc *htc,
 	return 0;
 
 err_unmap:
-	ath10k_skb_unmap(htc->ar->dev, skb);
+	dma_unmap_single(dev, skb_cb->paddr, skb->len, DMA_TO_DEVICE);
 err_credits:
 	if (ep->tx_credit_flow_enabled) {
 		spin_lock_bh(&htc->tx_lock);
diff --git a/drivers/net/wireless/ath/ath10k/htt_tx.c b/drivers/net/wireless/ath/ath10k/htt_tx.c
index acaa046dc93b..f5960c593810 100644
--- a/drivers/net/wireless/ath/ath10k/htt_tx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_tx.c
@@ -334,7 +334,9 @@ int ath10k_htt_mgmt_tx(struct ath10k_htt *htt, struct sk_buff *msdu)
 		goto err_free_msdu_id;
 	}
 
-	res = ath10k_skb_map(dev, msdu);
+	skb_cb->paddr = dma_map_single(dev, msdu->data, msdu->len,
+				       DMA_TO_DEVICE);
+	res = dma_mapping_error(dev, skb_cb->paddr);
 	if (res)
 		goto err_free_txdesc;
 
@@ -358,7 +360,7 @@ int ath10k_htt_mgmt_tx(struct ath10k_htt *htt, struct sk_buff *msdu)
 	return 0;
 
 err_unmap_msdu:
-	ath10k_skb_unmap(dev, msdu);
+	dma_unmap_single(dev, skb_cb->paddr, msdu->len, DMA_TO_DEVICE);
 err_free_txdesc:
 	dev_kfree_skb_any(txdesc);
 err_free_msdu_id:
@@ -437,7 +439,9 @@ int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *msdu)
 		skb_cb->htt.pad_len = 0;
 	}
 
-	res = ath10k_skb_map(dev, msdu);
+	skb_cb->paddr = dma_map_single(dev, msdu->data, msdu->len,
+				       DMA_TO_DEVICE);
+	res = dma_mapping_error(dev, skb_cb->paddr);
 	if (res)
 		goto err_pull_txfrag;
 
@@ -509,7 +513,7 @@ int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *msdu)
 	return 0;
 
 err_unmap_msdu:
-	ath10k_skb_unmap(dev, msdu);
+	dma_unmap_single(dev, skb_cb->paddr, msdu->len, DMA_TO_DEVICE);
 err_pull_txfrag:
 	skb_pull(msdu, skb_cb->htt.frag_len + skb_cb->htt.pad_len);
 err_free_txdesc:
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 239357fb4175..9230ad5e0f87 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -839,7 +839,9 @@ static void ath10k_control_beaconing(struct ath10k_vif *arvif,
 
 		spin_lock_bh(&arvif->ar->data_lock);
 		if (arvif->beacon) {
-			ath10k_skb_unmap(arvif->ar->dev, arvif->beacon);
+			dma_unmap_single(arvif->ar->dev,
+					 ATH10K_SKB_CB(arvif->beacon)->paddr,
+					 arvif->beacon->len, DMA_TO_DEVICE);
 			dev_kfree_skb_any(arvif->beacon);
 
 			arvif->beacon = NULL;
diff --git a/drivers/net/wireless/ath/ath10k/txrx.c b/drivers/net/wireless/ath/ath10k/txrx.c
index dcf7efdc1825..fe69899f1a22 100644
--- a/drivers/net/wireless/ath/ath10k/txrx.c
+++ b/drivers/net/wireless/ath/ath10k/txrx.c
@@ -51,7 +51,6 @@ void ath10k_txrx_tx_unref(struct ath10k_htt *htt,
 	struct ieee80211_tx_info *info;
 	struct ath10k_skb_cb *skb_cb;
 	struct sk_buff *msdu;
-	int ret;
 
 	ath10k_dbg(ATH10K_DBG_HTT, "htt tx completion msdu_id %u discard %d no_ack %d\n",
 		   tx_done->msdu_id, !!tx_done->discard, !!tx_done->no_ack);
@@ -65,9 +64,7 @@ void ath10k_txrx_tx_unref(struct ath10k_htt *htt,
 	msdu = htt->pending_tx[tx_done->msdu_id];
 	skb_cb = ATH10K_SKB_CB(msdu);
 
-	ret = ath10k_skb_unmap(dev, msdu);
-	if (ret)
-		ath10k_warn("data skb unmap failed (%d)\n", ret);
+	dma_unmap_single(dev, skb_cb->paddr, msdu->len, DMA_TO_DEVICE);
 
 	if (skb_cb->htt.frag_len)
 		skb_pull(msdu, skb_cb->htt.frag_len + skb_cb->htt.pad_len);
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 91e501b5499e..478e7f669e79 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -1360,7 +1360,7 @@ static void ath10k_wmi_event_host_swba(struct ath10k *ar, struct sk_buff *skb)
 	struct wmi_bcn_info *bcn_info;
 	struct ath10k_vif *arvif;
 	struct sk_buff *bcn;
-	int vdev_id = 0;
+	int ret, vdev_id = 0;
 
 	ath10k_dbg(ATH10K_DBG_MGMT, "WMI_HOST_SWBA_EVENTID\n");
 
@@ -1435,16 +1435,27 @@ static void ath10k_wmi_event_host_swba(struct ath10k *ar, struct sk_buff *skb)
 				ath10k_warn("SWBA overrun on vdev %d\n",
 					    arvif->vdev_id);
 
-			ath10k_skb_unmap(ar->dev, arvif->beacon);
+			dma_unmap_single(arvif->ar->dev,
+					 ATH10K_SKB_CB(arvif->beacon)->paddr,
+					 arvif->beacon->len, DMA_TO_DEVICE);
 			dev_kfree_skb_any(arvif->beacon);
 		}
 
-		ath10k_skb_map(ar->dev, bcn);
+		ATH10K_SKB_CB(bcn)->paddr = dma_map_single(arvif->ar->dev,
+							   bcn->data, bcn->len,
+							   DMA_TO_DEVICE);
+		ret = dma_mapping_error(arvif->ar->dev,
+					ATH10K_SKB_CB(bcn)->paddr);
+		if (ret) {
+			ath10k_warn("failed to map beacon: %d\n", ret);
+			goto skip;
+		}
 
 		arvif->beacon = bcn;
 		arvif->beacon_sent = false;
 
 		ath10k_wmi_tx_beacon_nowait(arvif);
+skip:
 		spin_unlock_bh(&ar->data_lock);
 	}
 }
-- 
cgit v1.2.2


From 7676a88876b0e72b46c0e51cabcf47b416730509 Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Thu, 27 Feb 2014 18:50:04 +0200
Subject: ath10k: remove is_aborted from skb_cb

The flag wasn't used anymore. No need to keep it.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/core.h |  1 -
 drivers/net/wireless/ath/ath10k/pci.c  | 20 --------------------
 2 files changed, 21 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index be7d75040aad..ab7009126c78 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -62,7 +62,6 @@ struct ath10k;
 
 struct ath10k_skb_cb {
 	dma_addr_t paddr;
-	bool is_aborted;
 	u8 vdev_id;
 
 	struct {
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 34f09106f423..d97397563944 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -63,7 +63,6 @@ static int ath10k_pci_post_rx(struct ath10k *ar);
 static int ath10k_pci_post_rx_pipe(struct ath10k_pci_pipe *pipe_info,
 					     int num);
 static void ath10k_pci_rx_pipe_cleanup(struct ath10k_pci_pipe *pipe_info);
-static void ath10k_pci_stop_ce(struct ath10k *ar);
 static int ath10k_pci_cold_reset(struct ath10k *ar);
 static int ath10k_pci_warm_reset(struct ath10k *ar);
 static int ath10k_pci_wait_for_target_init(struct ath10k *ar);
@@ -993,22 +992,6 @@ static void ath10k_pci_kill_tasklet(struct ath10k *ar)
 		tasklet_kill(&ar_pci->pipe_info[i].intr);
 }
 
-static void ath10k_pci_stop_ce(struct ath10k *ar)
-{
-	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
-	struct ath10k_pci_compl *compl;
-	struct sk_buff *skb;
-
-	/* Mark pending completions as aborted, so that upper layers free up
-	 * their associated resources */
-	spin_lock_bh(&ar_pci->compl_lock);
-	list_for_each_entry(compl, &ar_pci->compl_process, list) {
-		skb = compl->skb;
-		ATH10K_SKB_CB(skb)->is_aborted = true;
-	}
-	spin_unlock_bh(&ar_pci->compl_lock);
-}
-
 static void ath10k_pci_cleanup_ce(struct ath10k *ar)
 {
 	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
@@ -1339,7 +1322,6 @@ err_stop:
 	ath10k_ce_disable_interrupts(ar);
 	ath10k_pci_free_irq(ar);
 	ath10k_pci_kill_tasklet(ar);
-	ath10k_pci_stop_ce(ar);
 	ath10k_pci_process_ce(ar);
 err_free_compl:
 	ath10k_pci_cleanup_ce(ar);
@@ -1424,7 +1406,6 @@ static void ath10k_pci_tx_pipe_cleanup(struct ath10k_pci_pipe *pipe_info)
 			continue;
 		}
 
-		ATH10K_SKB_CB(netbuf)->is_aborted = true;
 		ar_pci->msg_callbacks_current.tx_completion(ar,
 							    netbuf,
 							    id);
@@ -1482,7 +1463,6 @@ static void ath10k_pci_hif_stop(struct ath10k *ar)
 
 	ath10k_pci_free_irq(ar);
 	ath10k_pci_kill_tasklet(ar);
-	ath10k_pci_stop_ce(ar);
 
 	ret = ath10k_pci_request_early_irq(ar);
 	if (ret)
-- 
cgit v1.2.2


From 726346fc713498a84c4d591fce9f1fbe38bf2a44 Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Thu, 27 Feb 2014 18:50:04 +0200
Subject: ath10k: replace send_head() with tx_sg()

PCI is capable of handling scatter-gather lists.
This can be used to avoid copying memory.

Change the name of the callback while at to
reflect its purpose.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/ce.c  | 12 ++---
 drivers/net/wireless/ath/ath10k/ce.h  |  7 +++
 drivers/net/wireless/ath/ath10k/hif.h | 25 ++++++-----
 drivers/net/wireless/ath/ath10k/htc.c | 10 ++++-
 drivers/net/wireless/ath/ath10k/pci.c | 84 +++++++++++++++++++++++------------
 5 files changed, 92 insertions(+), 46 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath10k/ce.c b/drivers/net/wireless/ath/ath10k/ce.c
index d44d618b05f9..a0b1a8cc3393 100644
--- a/drivers/net/wireless/ath/ath10k/ce.c
+++ b/drivers/net/wireless/ath/ath10k/ce.c
@@ -266,12 +266,12 @@ static inline void ath10k_ce_engine_int_status_clear(struct ath10k *ar,
  * ath10k_ce_sendlist_send.
  * The caller takes responsibility for any needed locking.
  */
-static int ath10k_ce_send_nolock(struct ath10k_ce_pipe *ce_state,
-				 void *per_transfer_context,
-				 u32 buffer,
-				 unsigned int nbytes,
-				 unsigned int transfer_id,
-				 unsigned int flags)
+int ath10k_ce_send_nolock(struct ath10k_ce_pipe *ce_state,
+			  void *per_transfer_context,
+			  u32 buffer,
+			  unsigned int nbytes,
+			  unsigned int transfer_id,
+			  unsigned int flags)
 {
 	struct ath10k *ar = ce_state->ar;
 	struct ath10k_ce_ring *src_ring = ce_state->src_ring;
diff --git a/drivers/net/wireless/ath/ath10k/ce.h b/drivers/net/wireless/ath/ath10k/ce.h
index 67dbde6a5c74..322e929437de 100644
--- a/drivers/net/wireless/ath/ath10k/ce.h
+++ b/drivers/net/wireless/ath/ath10k/ce.h
@@ -152,6 +152,13 @@ int ath10k_ce_send(struct ath10k_ce_pipe *ce_state,
 		   unsigned int transfer_id,
 		   unsigned int flags);
 
+int ath10k_ce_send_nolock(struct ath10k_ce_pipe *ce_state,
+			  void *per_transfer_context,
+			  u32 buffer,
+			  unsigned int nbytes,
+			  unsigned int transfer_id,
+			  unsigned int flags);
+
 void ath10k_ce_send_cb_register(struct ath10k_ce_pipe *ce_state,
 				void (*send_cb)(struct ath10k_ce_pipe *),
 				int disable_interrupts);
diff --git a/drivers/net/wireless/ath/ath10k/hif.h b/drivers/net/wireless/ath/ath10k/hif.h
index dcdea68bcc0a..2ac7beacddca 100644
--- a/drivers/net/wireless/ath/ath10k/hif.h
+++ b/drivers/net/wireless/ath/ath10k/hif.h
@@ -21,6 +21,14 @@
 #include <linux/kernel.h>
 #include "core.h"
 
+struct ath10k_hif_sg_item {
+	u16 transfer_id;
+	void *transfer_context; /* NULL = tx completion callback not called */
+	void *vaddr; /* for debugging mostly */
+	u32 paddr;
+	u16 len;
+};
+
 struct ath10k_hif_cb {
 	int (*tx_completion)(struct ath10k *ar,
 			     struct sk_buff *wbuf,
@@ -31,11 +39,9 @@ struct ath10k_hif_cb {
 };
 
 struct ath10k_hif_ops {
-	/* Send the head of a buffer to HIF for transmission to the target. */
-	int (*send_head)(struct ath10k *ar, u8 pipe_id,
-			 unsigned int transfer_id,
-			 unsigned int nbytes,
-			 struct sk_buff *buf);
+	/* send a scatter-gather list to the target */
+	int (*tx_sg)(struct ath10k *ar, u8 pipe_id,
+		     struct ath10k_hif_sg_item *items, int n_items);
 
 	/*
 	 * API to handle HIF-specific BMI message exchanges, this API is
@@ -86,12 +92,11 @@ struct ath10k_hif_ops {
 };
 
 
-static inline int ath10k_hif_send_head(struct ath10k *ar, u8 pipe_id,
-				       unsigned int transfer_id,
-				       unsigned int nbytes,
-				       struct sk_buff *buf)
+static inline int ath10k_hif_tx_sg(struct ath10k *ar, u8 pipe_id,
+				   struct ath10k_hif_sg_item *items,
+				   int n_items)
 {
-	return ar->hif.ops->send_head(ar, pipe_id, transfer_id, nbytes, buf);
+	return ar->hif.ops->tx_sg(ar, pipe_id, items, n_items);
 }
 
 static inline int ath10k_hif_exchange_bmi_msg(struct ath10k *ar,
diff --git a/drivers/net/wireless/ath/ath10k/htc.c b/drivers/net/wireless/ath/ath10k/htc.c
index 69f1f4696c25..64ab8d642f5f 100644
--- a/drivers/net/wireless/ath/ath10k/htc.c
+++ b/drivers/net/wireless/ath/ath10k/htc.c
@@ -125,6 +125,7 @@ int ath10k_htc_send(struct ath10k_htc *htc,
 {
 	struct ath10k_htc_ep *ep = &htc->endpoint[eid];
 	struct ath10k_skb_cb *skb_cb = ATH10K_SKB_CB(skb);
+	struct ath10k_hif_sg_item sg_item;
 	struct device *dev = htc->ar->dev;
 	int credits = 0;
 	int ret;
@@ -166,8 +167,13 @@ int ath10k_htc_send(struct ath10k_htc *htc,
 	if (ret)
 		goto err_credits;
 
-	ret = ath10k_hif_send_head(htc->ar, ep->ul_pipe_id, ep->eid,
-				   skb->len, skb);
+	sg_item.transfer_id = ep->eid;
+	sg_item.transfer_context = skb;
+	sg_item.vaddr = skb->data;
+	sg_item.paddr = skb_cb->paddr;
+	sg_item.len = skb->len;
+
+	ret = ath10k_hif_tx_sg(htc->ar, ep->ul_pipe_id, &sg_item, 1);
 	if (ret)
 		goto err_unmap;
 
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index d97397563944..713c18e8a1a8 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -714,6 +714,9 @@ static void ath10k_pci_ce_send_done(struct ath10k_ce_pipe *ce_state)
 	while (ath10k_ce_completed_send_next(ce_state, &transfer_context,
 					     &ce_data, &nbytes,
 					     &transfer_id) == 0) {
+		if (transfer_context == NULL)
+			continue;
+
 		compl = get_free_compl(pipe_info);
 		if (!compl)
 			break;
@@ -781,39 +784,64 @@ static void ath10k_pci_ce_recv_data(struct ath10k_ce_pipe *ce_state)
 	ath10k_pci_process_ce(ar);
 }
 
-/* Send the first nbytes bytes of the buffer */
-static int ath10k_pci_hif_send_head(struct ath10k *ar, u8 pipe_id,
-				    unsigned int transfer_id,
-				    unsigned int bytes, struct sk_buff *nbuf)
+static int ath10k_pci_hif_tx_sg(struct ath10k *ar, u8 pipe_id,
+				struct ath10k_hif_sg_item *items, int n_items)
 {
-	struct ath10k_skb_cb *skb_cb = ATH10K_SKB_CB(nbuf);
 	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
-	struct ath10k_pci_pipe *pipe_info = &(ar_pci->pipe_info[pipe_id]);
-	struct ath10k_ce_pipe *ce_hdl = pipe_info->ce_hdl;
-	unsigned int len;
-	u32 flags = 0;
-	int ret;
+	struct ath10k_pci_pipe *pci_pipe = &ar_pci->pipe_info[pipe_id];
+	struct ath10k_ce_pipe *ce_pipe = pci_pipe->ce_hdl;
+	struct ath10k_ce_ring *src_ring = ce_pipe->src_ring;
+	unsigned int nentries_mask = src_ring->nentries_mask;
+	unsigned int sw_index = src_ring->sw_index;
+	unsigned int write_index = src_ring->write_index;
+	int err, i;
 
-	len = min(bytes, nbuf->len);
-	bytes -= len;
+	spin_lock_bh(&ar_pci->ce_lock);
 
-	if (len & 3)
-		ath10k_warn("skb not aligned to 4-byte boundary (%d)\n", len);
+	if (unlikely(CE_RING_DELTA(nentries_mask,
+				   write_index, sw_index - 1) < n_items)) {
+		err = -ENOBUFS;
+		goto unlock;
+	}
 
-	ath10k_dbg(ATH10K_DBG_PCI,
-		   "pci send data vaddr %p paddr 0x%llx len %d as %d bytes\n",
-		   nbuf->data, (unsigned long long) skb_cb->paddr,
-		   nbuf->len, len);
-	ath10k_dbg_dump(ATH10K_DBG_PCI_DUMP, NULL,
-			"ath10k tx: data: ",
-			nbuf->data, nbuf->len);
-
-	ret = ath10k_ce_send(ce_hdl, nbuf, skb_cb->paddr, len, transfer_id,
-			     flags);
-	if (ret)
-		ath10k_warn("failed to send sk_buff to CE: %p\n", nbuf);
+	for (i = 0; i < n_items - 1; i++) {
+		ath10k_dbg(ATH10K_DBG_PCI,
+			   "pci tx item %d paddr 0x%08x len %d n_items %d\n",
+			   i, items[i].paddr, items[i].len, n_items);
+		ath10k_dbg_dump(ATH10K_DBG_PCI_DUMP, NULL, "item data: ",
+				items[i].vaddr, items[i].len);
 
-	return ret;
+		err = ath10k_ce_send_nolock(ce_pipe,
+					    items[i].transfer_context,
+					    items[i].paddr,
+					    items[i].len,
+					    items[i].transfer_id,
+					    CE_SEND_FLAG_GATHER);
+		if (err)
+			goto unlock;
+	}
+
+	/* `i` is equal to `n_items -1` after for() */
+
+	ath10k_dbg(ATH10K_DBG_PCI,
+		   "pci tx item %d paddr 0x%08x len %d n_items %d\n",
+		   i, items[i].paddr, items[i].len, n_items);
+	ath10k_dbg_dump(ATH10K_DBG_PCI_DUMP, NULL, "item data: ",
+			items[i].vaddr, items[i].len);
+
+	err = ath10k_ce_send_nolock(ce_pipe,
+				    items[i].transfer_context,
+				    items[i].paddr,
+				    items[i].len,
+				    items[i].transfer_id,
+				    0);
+	if (err)
+		goto unlock;
+
+	err = 0;
+unlock:
+	spin_unlock_bh(&ar_pci->ce_lock);
+	return err;
 }
 
 static u16 ath10k_pci_hif_get_free_queue_number(struct ath10k *ar, u8 pipe)
@@ -2249,7 +2277,7 @@ static int ath10k_pci_hif_resume(struct ath10k *ar)
 #endif
 
 static const struct ath10k_hif_ops ath10k_pci_hif_ops = {
-	.send_head		= ath10k_pci_hif_send_head,
+	.tx_sg			= ath10k_pci_hif_tx_sg,
 	.exchange_bmi_msg	= ath10k_pci_hif_exchange_bmi_msg,
 	.start			= ath10k_pci_hif_start,
 	.stop			= ath10k_pci_hif_stop,
-- 
cgit v1.2.2


From a16942e63008875a6a057ea2973becd261ed0c4e Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Thu, 27 Feb 2014 18:50:04 +0200
Subject: ath10k: bypass htc for htt tx path

Going through full htc tx path for htt tx is a
waste of resources. By skipping it it's possible
to easily submit scatter-gather to the pci hif for
reduced host cpu load and improved performance.

The new approach uses dma pool to store the
following metadata for each tx request:
 * msdu fragment list
 * htc header
 * htt tx command

The htt tx command contains a msdu prefetch.
Instead of copying it original mapped msdu address
is used to submit a second scatter-gather item to
hif to make a complete htt tx command.

The htt tx command itself hands over dma mapped
pointers to msdus and completion of the command
itself doesn't mean the frame has been sent and
can be unmapped/freed. This is why htc tx
completion is skipped for htt tx as all tx related
resources are freed upon htt tx completion
indication event (which also implicitly means htt
tx command itself was completed).

Since now each htt tx request effectively consists
of 2 copy engine items CE_HTT_H2T_MSG_SRC_NENTRIES
is updated to allow maximum of
TARGET_10X_NUM_MSDU_DESC msdus being queued. This
keeps the tx path resource management simple.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/ce.c     |   4 +-
 drivers/net/wireless/ath/ath10k/ce.h     |   2 +-
 drivers/net/wireless/ath/ath10k/core.h   |   5 +-
 drivers/net/wireless/ath/ath10k/htc.c    |   4 +-
 drivers/net/wireless/ath/ath10k/htt.h    |   9 ++
 drivers/net/wireless/ath/ath10k/htt_tx.c | 190 ++++++++++++++++---------------
 drivers/net/wireless/ath/ath10k/pci.c    |  12 +-
 drivers/net/wireless/ath/ath10k/txrx.c   |   6 +-
 8 files changed, 123 insertions(+), 109 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath10k/ce.c b/drivers/net/wireless/ath/ath10k/ce.c
index a0b1a8cc3393..a79499c82350 100644
--- a/drivers/net/wireless/ath/ath10k/ce.c
+++ b/drivers/net/wireless/ath/ath10k/ce.c
@@ -1067,9 +1067,9 @@ struct ath10k_ce_pipe *ath10k_ce_init(struct ath10k *ar,
 	 *
 	 * For the lack of a better place do the check here.
 	 */
-	BUILD_BUG_ON(TARGET_NUM_MSDU_DESC >
+	BUILD_BUG_ON(2*TARGET_NUM_MSDU_DESC >
 		     (CE_HTT_H2T_MSG_SRC_NENTRIES - 1));
-	BUILD_BUG_ON(TARGET_10X_NUM_MSDU_DESC >
+	BUILD_BUG_ON(2*TARGET_10X_NUM_MSDU_DESC >
 		     (CE_HTT_H2T_MSG_SRC_NENTRIES - 1));
 
 	ret = ath10k_pci_wake(ar);
diff --git a/drivers/net/wireless/ath/ath10k/ce.h b/drivers/net/wireless/ath/ath10k/ce.h
index 322e929437de..8eb7f99ed992 100644
--- a/drivers/net/wireless/ath/ath10k/ce.h
+++ b/drivers/net/wireless/ath/ath10k/ce.h
@@ -23,7 +23,7 @@
 
 /* Maximum number of Copy Engine's supported */
 #define CE_COUNT_MAX 8
-#define CE_HTT_H2T_MSG_SRC_NENTRIES 2048
+#define CE_HTT_H2T_MSG_SRC_NENTRIES 4096
 
 /* Descriptor rings must be aligned to this boundary */
 #define CE_DESC_RING_ALIGN	8
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index ab7009126c78..0e71979d837c 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -67,9 +67,8 @@ struct ath10k_skb_cb {
 	struct {
 		u8 tid;
 		bool is_offchan;
-
-		u8 frag_len;
-		u8 pad_len;
+		struct ath10k_htt_txbuf *txbuf;
+		u32 txbuf_paddr;
 	} __packed htt;
 
 	struct {
diff --git a/drivers/net/wireless/ath/ath10k/htc.c b/drivers/net/wireless/ath/ath10k/htc.c
index 64ab8d642f5f..7f1bccd3597f 100644
--- a/drivers/net/wireless/ath/ath10k/htc.c
+++ b/drivers/net/wireless/ath/ath10k/htc.c
@@ -202,10 +202,8 @@ static int ath10k_htc_tx_completion_handler(struct ath10k *ar,
 	struct ath10k_htc *htc = &ar->htc;
 	struct ath10k_htc_ep *ep = &htc->endpoint[eid];
 
-	if (!skb) {
-		ath10k_warn("invalid sk_buff completion - NULL pointer. firmware crashed?\n");
+	if (WARN_ON_ONCE(!skb))
 		return 0;
-	}
 
 	ath10k_htc_notify_tx_completion(ep, skb);
 	/* the skb now belongs to the completion handler */
diff --git a/drivers/net/wireless/ath/ath10k/htt.h b/drivers/net/wireless/ath/ath10k/htt.h
index 02c009d227a4..2b76cb5d77a4 100644
--- a/drivers/net/wireless/ath/ath10k/htt.h
+++ b/drivers/net/wireless/ath/ath10k/htt.h
@@ -20,6 +20,7 @@
 
 #include <linux/bug.h>
 #include <linux/interrupt.h>
+#include <linux/dmapool.h>
 
 #include "htc.h"
 #include "rx_desc.h"
@@ -1188,6 +1189,13 @@ struct htt_rx_info {
 	bool mic_err;
 };
 
+struct ath10k_htt_txbuf {
+	struct htt_data_tx_desc_frag frags[2];
+	struct ath10k_htc_hdr htc_hdr;
+	struct htt_cmd_hdr cmd_hdr;
+	struct htt_data_tx_desc cmd_tx;
+} __packed;
+
 struct ath10k_htt {
 	struct ath10k *ar;
 	enum ath10k_htc_ep_id eid;
@@ -1269,6 +1277,7 @@ struct ath10k_htt {
 	struct sk_buff **pending_tx;
 	unsigned long *used_msdu_ids; /* bitmap */
 	wait_queue_head_t empty_tx_wq;
+	struct dma_pool *tx_pool;
 
 	/* set if host-fw communication goes haywire
 	 * used to avoid further failures */
diff --git a/drivers/net/wireless/ath/ath10k/htt_tx.c b/drivers/net/wireless/ath/ath10k/htt_tx.c
index f5960c593810..20b7a446a9f8 100644
--- a/drivers/net/wireless/ath/ath10k/htt_tx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_tx.c
@@ -109,6 +109,14 @@ int ath10k_htt_tx_attach(struct ath10k_htt *htt)
 		return -ENOMEM;
 	}
 
+	htt->tx_pool = dma_pool_create("ath10k htt tx pool", htt->ar->dev,
+				       sizeof(struct ath10k_htt_txbuf), 4, 0);
+	if (!htt->tx_pool) {
+		kfree(htt->used_msdu_ids);
+		kfree(htt->pending_tx);
+		return -ENOMEM;
+	}
+
 	return 0;
 }
 
@@ -139,6 +147,7 @@ void ath10k_htt_tx_detach(struct ath10k_htt *htt)
 	ath10k_htt_tx_cleanup_pending(htt);
 	kfree(htt->pending_tx);
 	kfree(htt->used_msdu_ids);
+	dma_pool_destroy(htt->tx_pool);
 	return;
 }
 
@@ -350,8 +359,7 @@ int ath10k_htt_mgmt_tx(struct ath10k_htt *htt, struct sk_buff *msdu)
 	memcpy(cmd->mgmt_tx.hdr, msdu->data,
 	       min_t(int, msdu->len, HTT_MGMT_FRM_HDR_DOWNLOAD_LEN));
 
-	skb_cb->htt.frag_len = 0;
-	skb_cb->htt.pad_len = 0;
+	skb_cb->htt.txbuf = NULL;
 
 	res = ath10k_htc_send(&htt->ar->htc, htt->eid, txdesc);
 	if (res)
@@ -377,19 +385,19 @@ err:
 int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *msdu)
 {
 	struct device *dev = htt->ar->dev;
-	struct htt_cmd *cmd;
-	struct htt_data_tx_desc_frag *tx_frags;
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)msdu->data;
 	struct ath10k_skb_cb *skb_cb = ATH10K_SKB_CB(msdu);
-	struct sk_buff *txdesc = NULL;
-	bool use_frags;
-	u8 vdev_id = ATH10K_SKB_CB(msdu)->vdev_id;
-	u8 tid;
-	int prefetch_len, desc_len;
-	int msdu_id = -1;
+	struct ath10k_hif_sg_item sg_items[2];
+	struct htt_data_tx_desc_frag *frags;
+	u8 vdev_id = skb_cb->vdev_id;
+	u8 tid = skb_cb->htt.tid;
+	int prefetch_len;
 	int res;
-	u8 flags0;
-	u16 flags1;
+	u8 flags0 = 0;
+	u16 msdu_id, flags1 = 0;
+	dma_addr_t paddr;
+	u32 frags_paddr;
+	bool use_frags;
 
 	res = ath10k_htt_tx_inc_pending(htt);
 	if (res)
@@ -408,105 +416,109 @@ int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *msdu)
 	prefetch_len = min(htt->prefetch_len, msdu->len);
 	prefetch_len = roundup(prefetch_len, 4);
 
-	desc_len = sizeof(cmd->hdr) + sizeof(cmd->data_tx) + prefetch_len;
-
-	txdesc = ath10k_htc_alloc_skb(desc_len);
-	if (!txdesc) {
-		res = -ENOMEM;
-		goto err_free_msdu_id;
-	}
-
 	/* Since HTT 3.0 there is no separate mgmt tx command. However in case
 	 * of mgmt tx using TX_FRM there is not tx fragment list. Instead of tx
 	 * fragment list host driver specifies directly frame pointer. */
 	use_frags = htt->target_version_major < 3 ||
 		    !ieee80211_is_mgmt(hdr->frame_control);
 
-	if (!IS_ALIGNED((unsigned long)txdesc->data, 4)) {
-		ath10k_warn("htt alignment check failed. dropping packet.\n");
-		res = -EIO;
-		goto err_free_txdesc;
-	}
-
-	if (use_frags) {
-		skb_cb->htt.frag_len = sizeof(*tx_frags) * 2;
-		skb_cb->htt.pad_len = (unsigned long)msdu->data -
-				      round_down((unsigned long)msdu->data, 4);
-
-		skb_push(msdu, skb_cb->htt.frag_len + skb_cb->htt.pad_len);
-	} else {
-		skb_cb->htt.frag_len = 0;
-		skb_cb->htt.pad_len = 0;
-	}
+	skb_cb->htt.txbuf = dma_pool_alloc(htt->tx_pool, GFP_ATOMIC,
+					   &paddr);
+	if (!skb_cb->htt.txbuf)
+		goto err_free_msdu_id;
+	skb_cb->htt.txbuf_paddr = paddr;
 
 	skb_cb->paddr = dma_map_single(dev, msdu->data, msdu->len,
 				       DMA_TO_DEVICE);
 	res = dma_mapping_error(dev, skb_cb->paddr);
 	if (res)
-		goto err_pull_txfrag;
-
-	if (use_frags) {
-		dma_sync_single_for_cpu(dev, skb_cb->paddr, msdu->len,
-					DMA_TO_DEVICE);
-
-		/* tx fragment list must be terminated with zero-entry */
-		tx_frags = (struct htt_data_tx_desc_frag *)msdu->data;
-		tx_frags[0].paddr = __cpu_to_le32(skb_cb->paddr +
-						  skb_cb->htt.frag_len +
-						  skb_cb->htt.pad_len);
-		tx_frags[0].len   = __cpu_to_le32(msdu->len -
-						  skb_cb->htt.frag_len -
-						  skb_cb->htt.pad_len);
-		tx_frags[1].paddr = __cpu_to_le32(0);
-		tx_frags[1].len   = __cpu_to_le32(0);
-
-		dma_sync_single_for_device(dev, skb_cb->paddr, msdu->len,
-					   DMA_TO_DEVICE);
-	}
+		goto err_free_txbuf;
 
-	ath10k_dbg(ATH10K_DBG_HTT, "tx-msdu 0x%llx\n",
-		   (unsigned long long) ATH10K_SKB_CB(msdu)->paddr);
-	ath10k_dbg_dump(ATH10K_DBG_HTT_DUMP, NULL, "tx-msdu: ",
-			msdu->data, msdu->len);
+	if (likely(use_frags)) {
+		frags = skb_cb->htt.txbuf->frags;
 
-	skb_put(txdesc, desc_len);
-	cmd = (struct htt_cmd *)txdesc->data;
+		frags[0].paddr = __cpu_to_le32(skb_cb->paddr);
+		frags[0].len = __cpu_to_le32(msdu->len);
+		frags[1].paddr = 0;
+		frags[1].len = 0;
+
+		flags0 |= SM(ATH10K_HW_TXRX_NATIVE_WIFI,
+			     HTT_DATA_TX_DESC_FLAGS0_PKT_TYPE);
 
-	tid = ATH10K_SKB_CB(msdu)->htt.tid;
+		frags_paddr = skb_cb->htt.txbuf_paddr;
+	} else {
+		flags0 |= SM(ATH10K_HW_TXRX_MGMT,
+			     HTT_DATA_TX_DESC_FLAGS0_PKT_TYPE);
 
-	ath10k_dbg(ATH10K_DBG_HTT, "htt data tx using tid %hhu\n", tid);
+		frags_paddr = skb_cb->paddr;
+	}
+
+	/* Normally all commands go through HTC which manages tx credits for
+	 * each endpoint and notifies when tx is completed.
+	 *
+	 * HTT endpoint is creditless so there's no need to care about HTC
+	 * flags. In that case it is trivial to fill the HTC header here.
+	 *
+	 * MSDU transmission is considered completed upon HTT event. This
+	 * implies no relevant resources can be freed until after the event is
+	 * received. That's why HTC tx completion handler itself is ignored by
+	 * setting NULL to transfer_context for all sg items.
+	 *
+	 * There is simply no point in pushing HTT TX_FRM through HTC tx path
+	 * as it's a waste of resources. By bypassing HTC it is possible to
+	 * avoid extra memory allocations, compress data structures and thus
+	 * improve performance. */
+
+	skb_cb->htt.txbuf->htc_hdr.eid = htt->eid;
+	skb_cb->htt.txbuf->htc_hdr.len = __cpu_to_le16(
+			sizeof(skb_cb->htt.txbuf->cmd_hdr) +
+			sizeof(skb_cb->htt.txbuf->cmd_tx) +
+			prefetch_len);
+	skb_cb->htt.txbuf->htc_hdr.flags = 0;
 
-	flags0  = 0;
 	if (!ieee80211_has_protected(hdr->frame_control))
 		flags0 |= HTT_DATA_TX_DESC_FLAGS0_NO_ENCRYPT;
-	flags0 |= HTT_DATA_TX_DESC_FLAGS0_MAC_HDR_PRESENT;
 
-	if (use_frags)
-		flags0 |= SM(ATH10K_HW_TXRX_NATIVE_WIFI,
-			     HTT_DATA_TX_DESC_FLAGS0_PKT_TYPE);
-	else
-		flags0 |= SM(ATH10K_HW_TXRX_MGMT,
-			     HTT_DATA_TX_DESC_FLAGS0_PKT_TYPE);
+	flags0 |= HTT_DATA_TX_DESC_FLAGS0_MAC_HDR_PRESENT;
 
-	flags1  = 0;
 	flags1 |= SM((u16)vdev_id, HTT_DATA_TX_DESC_FLAGS1_VDEV_ID);
 	flags1 |= SM((u16)tid, HTT_DATA_TX_DESC_FLAGS1_EXT_TID);
 	flags1 |= HTT_DATA_TX_DESC_FLAGS1_CKSUM_L3_OFFLOAD;
 	flags1 |= HTT_DATA_TX_DESC_FLAGS1_CKSUM_L4_OFFLOAD;
 
-	cmd->hdr.msg_type        = HTT_H2T_MSG_TYPE_TX_FRM;
-	cmd->data_tx.flags0      = flags0;
-	cmd->data_tx.flags1      = __cpu_to_le16(flags1);
-	cmd->data_tx.len         = __cpu_to_le16(msdu->len -
-						 skb_cb->htt.frag_len -
-						 skb_cb->htt.pad_len);
-	cmd->data_tx.id          = __cpu_to_le16(msdu_id);
-	cmd->data_tx.frags_paddr = __cpu_to_le32(skb_cb->paddr);
-	cmd->data_tx.peerid      = __cpu_to_le32(HTT_INVALID_PEERID);
-
-	memcpy(cmd->data_tx.prefetch, hdr, prefetch_len);
+	skb_cb->htt.txbuf->cmd_hdr.msg_type = HTT_H2T_MSG_TYPE_TX_FRM;
+	skb_cb->htt.txbuf->cmd_tx.flags0 = flags0;
+	skb_cb->htt.txbuf->cmd_tx.flags1 = __cpu_to_le16(flags1);
+	skb_cb->htt.txbuf->cmd_tx.len = __cpu_to_le16(msdu->len);
+	skb_cb->htt.txbuf->cmd_tx.id = __cpu_to_le16(msdu_id);
+	skb_cb->htt.txbuf->cmd_tx.frags_paddr = __cpu_to_le32(frags_paddr);
+	skb_cb->htt.txbuf->cmd_tx.peerid = __cpu_to_le32(HTT_INVALID_PEERID);
+
+	ath10k_dbg(ATH10K_DBG_HTT,
+		   "htt tx flags0 %hhu flags1 %hu len %d id %hu frags_paddr %08x, msdu_paddr %08x vdev %hhu tid %hhu\n",
+		   flags0, flags1, msdu->len, msdu_id, frags_paddr,
+		   (u32)skb_cb->paddr, vdev_id, tid);
+	ath10k_dbg_dump(ATH10K_DBG_HTT_DUMP, NULL, "htt tx msdu: ",
+			msdu->data, msdu->len);
 
-	res = ath10k_htc_send(&htt->ar->htc, htt->eid, txdesc);
+	sg_items[0].transfer_id = 0;
+	sg_items[0].transfer_context = NULL;
+	sg_items[0].vaddr = &skb_cb->htt.txbuf->htc_hdr;
+	sg_items[0].paddr = skb_cb->htt.txbuf_paddr +
+			    sizeof(skb_cb->htt.txbuf->frags);
+	sg_items[0].len = sizeof(skb_cb->htt.txbuf->htc_hdr) +
+			  sizeof(skb_cb->htt.txbuf->cmd_hdr) +
+			  sizeof(skb_cb->htt.txbuf->cmd_tx);
+
+	sg_items[1].transfer_id = 0;
+	sg_items[1].transfer_context = NULL;
+	sg_items[1].vaddr = msdu->data;
+	sg_items[1].paddr = skb_cb->paddr;
+	sg_items[1].len = prefetch_len;
+
+	res = ath10k_hif_tx_sg(htt->ar,
+			       htt->ar->htc.endpoint[htt->eid].ul_pipe_id,
+			       sg_items, ARRAY_SIZE(sg_items));
 	if (res)
 		goto err_unmap_msdu;
 
@@ -514,10 +526,10 @@ int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *msdu)
 
 err_unmap_msdu:
 	dma_unmap_single(dev, skb_cb->paddr, msdu->len, DMA_TO_DEVICE);
-err_pull_txfrag:
-	skb_pull(msdu, skb_cb->htt.frag_len + skb_cb->htt.pad_len);
-err_free_txdesc:
-	dev_kfree_skb_any(txdesc);
+err_free_txbuf:
+	dma_pool_free(htt->tx_pool,
+		      skb_cb->htt.txbuf,
+		      skb_cb->htt.txbuf_paddr);
 err_free_msdu_id:
 	spin_lock_bh(&htt->tx_lock);
 	htt->pending_tx[msdu_id] = NULL;
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 713c18e8a1a8..2305d583019b 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -714,6 +714,7 @@ static void ath10k_pci_ce_send_done(struct ath10k_ce_pipe *ce_state)
 	while (ath10k_ce_completed_send_next(ce_state, &transfer_context,
 					     &ce_data, &nbytes,
 					     &transfer_id) == 0) {
+		/* no need to call tx completion for NULL pointers */
 		if (transfer_context == NULL)
 			continue;
 
@@ -1423,16 +1424,9 @@ static void ath10k_pci_tx_pipe_cleanup(struct ath10k_pci_pipe *pipe_info)
 
 	while (ath10k_ce_cancel_send_next(ce_hdl, (void **)&netbuf,
 					  &ce_data, &nbytes, &id) == 0) {
-		/*
-		 * Indicate the completion to higer layer to free
-		 * the buffer
-		 */
-
-		if (!netbuf) {
-			ath10k_warn("invalid sk_buff on CE %d - NULL pointer. firmware crashed?\n",
-				    ce_hdl->id);
+		/* no need to call tx completion for NULL pointers */
+		if (!netbuf)
 			continue;
-		}
 
 		ar_pci->msg_callbacks_current.tx_completion(ar,
 							    netbuf,
diff --git a/drivers/net/wireless/ath/ath10k/txrx.c b/drivers/net/wireless/ath/ath10k/txrx.c
index fe69899f1a22..2993ca772c56 100644
--- a/drivers/net/wireless/ath/ath10k/txrx.c
+++ b/drivers/net/wireless/ath/ath10k/txrx.c
@@ -66,8 +66,10 @@ void ath10k_txrx_tx_unref(struct ath10k_htt *htt,
 
 	dma_unmap_single(dev, skb_cb->paddr, msdu->len, DMA_TO_DEVICE);
 
-	if (skb_cb->htt.frag_len)
-		skb_pull(msdu, skb_cb->htt.frag_len + skb_cb->htt.pad_len);
+	if (skb_cb->htt.txbuf)
+		dma_pool_free(htt->tx_pool,
+			      skb_cb->htt.txbuf,
+			      skb_cb->htt.txbuf_paddr);
 
 	ath10k_report_offchan_tx(htt->ar, msdu);
 
-- 
cgit v1.2.2


From 6c5151a9ffa9f796f2d707617cecb6b6b241dff8 Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Thu, 27 Feb 2014 18:50:04 +0200
Subject: ath10k: batch htt tx/rx completions

HTT Rx endpoint processes both frame rx
indications and frame tx completion indications.

Those completions typically come in batches and
may be mixed so it makes sense to defer processing
hoping to get a bunch of them and take advantage
of hot caches.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/htt.h    |   7 ++
 drivers/net/wireless/ath/ath10k/htt_rx.c | 118 ++++++++++++++++++++-----------
 2 files changed, 85 insertions(+), 40 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath10k/htt.h b/drivers/net/wireless/ath/ath10k/htt.h
index 2b76cb5d77a4..654867fc1ae7 100644
--- a/drivers/net/wireless/ath/ath10k/htt.h
+++ b/drivers/net/wireless/ath/ath10k/htt.h
@@ -1283,6 +1283,12 @@ struct ath10k_htt {
 	 * used to avoid further failures */
 	bool rx_confused;
 	struct tasklet_struct rx_replenish_task;
+
+	/* This is used to group tx/rx completions separately and process them
+	 * in batches to reduce cache stalls */
+	struct tasklet_struct txrx_compl_task;
+	struct sk_buff_head tx_compl_q;
+	struct sk_buff_head rx_compl_q;
 };
 
 #define RX_HTT_HDR_STATUS_LEN 64
@@ -1354,4 +1360,5 @@ int ath10k_htt_tx_alloc_msdu_id(struct ath10k_htt *htt);
 void ath10k_htt_tx_free_msdu_id(struct ath10k_htt *htt, u16 msdu_id);
 int ath10k_htt_mgmt_tx(struct ath10k_htt *htt, struct sk_buff *);
 int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *);
+
 #endif
diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index 23d909555e58..b7150de984e7 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -43,7 +43,7 @@
 
 
 static int ath10k_htt_rx_get_csum_state(struct sk_buff *skb);
-
+static void ath10k_htt_txrx_compl_task(unsigned long ptr);
 
 static int ath10k_htt_rx_ring_size(struct ath10k_htt *htt)
 {
@@ -237,6 +237,10 @@ void ath10k_htt_rx_detach(struct ath10k_htt *htt)
 
 	del_timer_sync(&htt->rx_ring.refill_retry_timer);
 	tasklet_kill(&htt->rx_replenish_task);
+	tasklet_kill(&htt->txrx_compl_task);
+
+	skb_queue_purge(&htt->tx_compl_q);
+	skb_queue_purge(&htt->rx_compl_q);
 
 	while (sw_rd_idx != __le32_to_cpu(*(htt->rx_ring.alloc_idx.vaddr))) {
 		struct sk_buff *skb =
@@ -529,6 +533,12 @@ int ath10k_htt_rx_attach(struct ath10k_htt *htt)
 	tasklet_init(&htt->rx_replenish_task, ath10k_htt_rx_replenish_task,
 		     (unsigned long)htt);
 
+	skb_queue_head_init(&htt->tx_compl_q);
+	skb_queue_head_init(&htt->rx_compl_q);
+
+	tasklet_init(&htt->txrx_compl_task, ath10k_htt_txrx_compl_task,
+		     (unsigned long)htt);
+
 	ath10k_dbg(ATH10K_DBG_BOOT, "htt rx ring size %d fill_level %d\n",
 		   htt->rx_ring.size, htt->rx_ring.fill_level);
 	return 0;
@@ -1138,6 +1148,43 @@ end:
 	}
 }
 
+static void ath10k_htt_rx_frm_tx_compl(struct ath10k *ar,
+				       struct sk_buff *skb)
+{
+	struct ath10k_htt *htt = &ar->htt;
+	struct htt_resp *resp = (struct htt_resp *)skb->data;
+	struct htt_tx_done tx_done = {};
+	int status = MS(resp->data_tx_completion.flags, HTT_DATA_TX_STATUS);
+	__le16 msdu_id;
+	int i;
+
+	switch (status) {
+	case HTT_DATA_TX_STATUS_NO_ACK:
+		tx_done.no_ack = true;
+		break;
+	case HTT_DATA_TX_STATUS_OK:
+		break;
+	case HTT_DATA_TX_STATUS_DISCARD:
+	case HTT_DATA_TX_STATUS_POSTPONE:
+	case HTT_DATA_TX_STATUS_DOWNLOAD_FAIL:
+		tx_done.discard = true;
+		break;
+	default:
+		ath10k_warn("unhandled tx completion status %d\n", status);
+		tx_done.discard = true;
+		break;
+	}
+
+	ath10k_dbg(ATH10K_DBG_HTT, "htt tx completion num_msdus %d\n",
+		   resp->data_tx_completion.num_msdus);
+
+	for (i = 0; i < resp->data_tx_completion.num_msdus; i++) {
+		msdu_id = resp->data_tx_completion.msdus[i];
+		tx_done.msdu_id = __le16_to_cpu(msdu_id);
+		ath10k_txrx_tx_unref(htt, &tx_done);
+	}
+}
+
 void ath10k_htt_t2h_msg_handler(struct ath10k *ar, struct sk_buff *skb)
 {
 	struct ath10k_htt *htt = &ar->htt;
@@ -1156,10 +1203,10 @@ void ath10k_htt_t2h_msg_handler(struct ath10k *ar, struct sk_buff *skb)
 		complete(&htt->target_version_received);
 		break;
 	}
-	case HTT_T2H_MSG_TYPE_RX_IND: {
-		ath10k_htt_rx_handler(htt, &resp->rx_ind);
-		break;
-	}
+	case HTT_T2H_MSG_TYPE_RX_IND:
+		skb_queue_tail(&htt->rx_compl_q, skb);
+		tasklet_schedule(&htt->txrx_compl_task);
+		return;
 	case HTT_T2H_MSG_TYPE_PEER_MAP: {
 		struct htt_peer_map_event ev = {
 			.vdev_id = resp->peer_map.vdev_id,
@@ -1194,44 +1241,17 @@ void ath10k_htt_t2h_msg_handler(struct ath10k *ar, struct sk_buff *skb)
 			break;
 		}
 
+		spin_lock_bh(&htt->tx_lock);
 		ath10k_txrx_tx_unref(htt, &tx_done);
+		spin_unlock_bh(&htt->tx_lock);
 		break;
 	}
-	case HTT_T2H_MSG_TYPE_TX_COMPL_IND: {
-		struct htt_tx_done tx_done = {};
-		int status = MS(resp->data_tx_completion.flags,
-				HTT_DATA_TX_STATUS);
-		__le16 msdu_id;
-		int i;
-
-		switch (status) {
-		case HTT_DATA_TX_STATUS_NO_ACK:
-			tx_done.no_ack = true;
-			break;
-		case HTT_DATA_TX_STATUS_OK:
-			break;
-		case HTT_DATA_TX_STATUS_DISCARD:
-		case HTT_DATA_TX_STATUS_POSTPONE:
-		case HTT_DATA_TX_STATUS_DOWNLOAD_FAIL:
-			tx_done.discard = true;
-			break;
-		default:
-			ath10k_warn("unhandled tx completion status %d\n",
-				    status);
-			tx_done.discard = true;
-			break;
-		}
-
-		ath10k_dbg(ATH10K_DBG_HTT, "htt tx completion num_msdus %d\n",
-			   resp->data_tx_completion.num_msdus);
-
-		for (i = 0; i < resp->data_tx_completion.num_msdus; i++) {
-			msdu_id = resp->data_tx_completion.msdus[i];
-			tx_done.msdu_id = __le16_to_cpu(msdu_id);
-			ath10k_txrx_tx_unref(htt, &tx_done);
-		}
-		break;
-	}
+	case HTT_T2H_MSG_TYPE_TX_COMPL_IND:
+		spin_lock_bh(&htt->tx_lock);
+		__skb_queue_tail(&htt->tx_compl_q, skb);
+		spin_unlock_bh(&htt->tx_lock);
+		tasklet_schedule(&htt->txrx_compl_task);
+		return;
 	case HTT_T2H_MSG_TYPE_SEC_IND: {
 		struct ath10k *ar = htt->ar;
 		struct htt_security_indication *ev = &resp->security_indication;
@@ -1271,3 +1291,21 @@ void ath10k_htt_t2h_msg_handler(struct ath10k *ar, struct sk_buff *skb)
 	/* Free the indication buffer */
 	dev_kfree_skb_any(skb);
 }
+
+static void ath10k_htt_txrx_compl_task(unsigned long ptr)
+{
+	struct ath10k_htt *htt = (struct ath10k_htt *)ptr;
+	struct htt_resp *resp;
+	struct sk_buff *skb;
+
+	while ((skb = skb_dequeue(&htt->tx_compl_q))) {
+		ath10k_htt_rx_frm_tx_compl(htt->ar, skb);
+		dev_kfree_skb_any(skb);
+	}
+
+	while ((skb = skb_dequeue(&htt->rx_compl_q))) {
+		resp = (struct htt_resp *)skb->data;
+		ath10k_htt_rx_handler(htt, &resp->rx_ind);
+		dev_kfree_skb_any(skb);
+	}
+}
-- 
cgit v1.2.2


From 45967089d2685d2327c9710fe796d499d90ae844 Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Thu, 27 Feb 2014 18:50:05 +0200
Subject: ath10k: reduce htt tx/rx spinlock overhead

It is inefficient to grab irqsave spinlocks for
skb lists for each queue/dequeue action.

Using rx_ring.lock and tx_lock allows to use less
heavy bh spinlock functions and moving locking
upwards allows to toggle spinlocks less often.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/htt_rx.c | 24 +++++++++++++++++++-----
 drivers/net/wireless/ath/ath10k/htt_tx.c |  5 ++---
 drivers/net/wireless/ath/ath10k/txrx.c   |  4 ++--
 3 files changed, 23 insertions(+), 10 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index b7150de984e7..8e708dfb63e3 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -274,7 +274,7 @@ static inline struct sk_buff *ath10k_htt_rx_netbuf_pop(struct ath10k_htt *htt)
 	int idx;
 	struct sk_buff *msdu;
 
-	spin_lock_bh(&htt->rx_ring.lock);
+	lockdep_assert_held(&htt->rx_ring.lock);
 
 	if (ath10k_htt_rx_ring_elems(htt) == 0)
 		ath10k_warn("htt rx ring is empty!\n");
@@ -287,7 +287,6 @@ static inline struct sk_buff *ath10k_htt_rx_netbuf_pop(struct ath10k_htt *htt)
 	htt->rx_ring.sw_rd_idx.msdu_payld = idx;
 	htt->rx_ring.fill_cnt--;
 
-	spin_unlock_bh(&htt->rx_ring.lock);
 	return msdu;
 }
 
@@ -311,6 +310,8 @@ static int ath10k_htt_rx_amsdu_pop(struct ath10k_htt *htt,
 	struct sk_buff *msdu;
 	struct htt_rx_desc *rx_desc;
 
+	lockdep_assert_held(&htt->rx_ring.lock);
+
 	if (ath10k_htt_rx_ring_elems(htt) == 0)
 		ath10k_warn("htt rx ring is empty!\n");
 
@@ -918,6 +919,8 @@ static void ath10k_htt_rx_handler(struct ath10k_htt *htt,
 	u8 *fw_desc;
 	int i, j;
 
+	lockdep_assert_held(&htt->rx_ring.lock);
+
 	memset(&info, 0, sizeof(info));
 
 	fw_desc_len = __le16_to_cpu(rx->prefix.fw_rx_desc_bytes);
@@ -1055,8 +1058,11 @@ static void ath10k_htt_rx_frag_handler(struct ath10k_htt *htt,
 
 	msdu_head = NULL;
 	msdu_tail = NULL;
+
+	spin_lock_bh(&htt->rx_ring.lock);
 	msdu_chaining = ath10k_htt_rx_amsdu_pop(htt, &fw_desc, &fw_desc_len,
 						&msdu_head, &msdu_tail);
+	spin_unlock_bh(&htt->rx_ring.lock);
 
 	ath10k_dbg(ATH10K_DBG_HTT_DUMP, "htt rx frag ahead\n");
 
@@ -1158,6 +1164,8 @@ static void ath10k_htt_rx_frm_tx_compl(struct ath10k *ar,
 	__le16 msdu_id;
 	int i;
 
+	lockdep_assert_held(&htt->tx_lock);
+
 	switch (status) {
 	case HTT_DATA_TX_STATUS_NO_ACK:
 		tx_done.no_ack = true;
@@ -1204,7 +1212,9 @@ void ath10k_htt_t2h_msg_handler(struct ath10k *ar, struct sk_buff *skb)
 		break;
 	}
 	case HTT_T2H_MSG_TYPE_RX_IND:
-		skb_queue_tail(&htt->rx_compl_q, skb);
+		spin_lock_bh(&htt->rx_ring.lock);
+		__skb_queue_tail(&htt->rx_compl_q, skb);
+		spin_unlock_bh(&htt->rx_ring.lock);
 		tasklet_schedule(&htt->txrx_compl_task);
 		return;
 	case HTT_T2H_MSG_TYPE_PEER_MAP: {
@@ -1298,14 +1308,18 @@ static void ath10k_htt_txrx_compl_task(unsigned long ptr)
 	struct htt_resp *resp;
 	struct sk_buff *skb;
 
-	while ((skb = skb_dequeue(&htt->tx_compl_q))) {
+	spin_lock_bh(&htt->tx_lock);
+	while ((skb = __skb_dequeue(&htt->tx_compl_q))) {
 		ath10k_htt_rx_frm_tx_compl(htt->ar, skb);
 		dev_kfree_skb_any(skb);
 	}
+	spin_unlock_bh(&htt->tx_lock);
 
-	while ((skb = skb_dequeue(&htt->rx_compl_q))) {
+	spin_lock_bh(&htt->rx_ring.lock);
+	while ((skb = __skb_dequeue(&htt->rx_compl_q))) {
 		resp = (struct htt_resp *)skb->data;
 		ath10k_htt_rx_handler(htt, &resp->rx_ind);
 		dev_kfree_skb_any(skb);
 	}
+	spin_unlock_bh(&htt->rx_ring.lock);
 }
diff --git a/drivers/net/wireless/ath/ath10k/htt_tx.c b/drivers/net/wireless/ath/ath10k/htt_tx.c
index 20b7a446a9f8..7a3e2e40dd5c 100644
--- a/drivers/net/wireless/ath/ath10k/htt_tx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_tx.c
@@ -125,9 +125,7 @@ static void ath10k_htt_tx_cleanup_pending(struct ath10k_htt *htt)
 	struct htt_tx_done tx_done = {0};
 	int msdu_id;
 
-	/* No locks needed. Called after communication with the device has
-	 * been stopped. */
-
+	spin_lock_bh(&htt->tx_lock);
 	for (msdu_id = 0; msdu_id < htt->max_num_pending_tx; msdu_id++) {
 		if (!test_bit(msdu_id, htt->used_msdu_ids))
 			continue;
@@ -140,6 +138,7 @@ static void ath10k_htt_tx_cleanup_pending(struct ath10k_htt *htt)
 
 		ath10k_txrx_tx_unref(htt, &tx_done);
 	}
+	spin_unlock_bh(&htt->tx_lock);
 }
 
 void ath10k_htt_tx_detach(struct ath10k_htt *htt)
diff --git a/drivers/net/wireless/ath/ath10k/txrx.c b/drivers/net/wireless/ath/ath10k/txrx.c
index 2993ca772c56..0541dd939ce9 100644
--- a/drivers/net/wireless/ath/ath10k/txrx.c
+++ b/drivers/net/wireless/ath/ath10k/txrx.c
@@ -52,6 +52,8 @@ void ath10k_txrx_tx_unref(struct ath10k_htt *htt,
 	struct ath10k_skb_cb *skb_cb;
 	struct sk_buff *msdu;
 
+	lockdep_assert_held(&htt->tx_lock);
+
 	ath10k_dbg(ATH10K_DBG_HTT, "htt tx completion msdu_id %u discard %d no_ack %d\n",
 		   tx_done->msdu_id, !!tx_done->discard, !!tx_done->no_ack);
 
@@ -91,13 +93,11 @@ void ath10k_txrx_tx_unref(struct ath10k_htt *htt,
 	/* we do not own the msdu anymore */
 
 exit:
-	spin_lock_bh(&htt->tx_lock);
 	htt->pending_tx[tx_done->msdu_id] = NULL;
 	ath10k_htt_tx_free_msdu_id(htt, tx_done->msdu_id);
 	__ath10k_htt_tx_dec_pending(htt);
 	if (htt->num_pending_tx == 0)
 		wake_up(&htt->empty_tx_wq);
-	spin_unlock_bh(&htt->tx_lock);
 }
 
 static const u8 rx_legacy_rate_idx[] = {
-- 
cgit v1.2.2


From 2f5280da40222fc2d61aa9425c681f615965c003 Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Thu, 27 Feb 2014 18:50:05 +0200
Subject: ath10k: remove pci completion list

One of the premises was to guarantee serialized
completion handling for upper layers
(HTC/WMI/HTT). Since quite some time now it is no
longer necessary.

The other premise was to batch up tx/rx
completions to take advantage of hot caches.
However frame tx/rx completion indications come in
on a single pipe already so they are already
batched up. More meaningful batching is done in
HTT itself.

This means PCI completion is no longer necessary
to keep around. It just wastes memory, cycles and
SLOC.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/pci.c | 275 +++-------------------------------
 drivers/net/wireless/ath/ath10k/pci.h |  28 ----
 2 files changed, 24 insertions(+), 279 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 2305d583019b..9d242d801d9d 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -58,7 +58,6 @@ static DEFINE_PCI_DEVICE_TABLE(ath10k_pci_id_table) = {
 static int ath10k_pci_diag_read_access(struct ath10k *ar, u32 address,
 				       u32 *data);
 
-static void ath10k_pci_process_ce(struct ath10k *ar);
 static int ath10k_pci_post_rx(struct ath10k *ar);
 static int ath10k_pci_post_rx_pipe(struct ath10k_pci_pipe *pipe_info,
 					     int num);
@@ -73,7 +72,6 @@ static void ath10k_pci_free_irq(struct ath10k *ar);
 static int ath10k_pci_bmi_wait(struct ath10k_ce_pipe *tx_pipe,
 			       struct ath10k_ce_pipe *rx_pipe,
 			       struct bmi_xfer *xfer);
-static void ath10k_pci_cleanup_ce(struct ath10k *ar);
 
 static const struct ce_attr host_ce_config_wlan[] = {
 	/* CE0: host->target HTC control and raw streams */
@@ -678,34 +676,12 @@ void ath10k_do_pci_sleep(struct ath10k *ar)
 	}
 }
 
-/*
- * FIXME: Handle OOM properly.
- */
-static inline
-struct ath10k_pci_compl *get_free_compl(struct ath10k_pci_pipe *pipe_info)
-{
-	struct ath10k_pci_compl *compl = NULL;
-
-	spin_lock_bh(&pipe_info->pipe_lock);
-	if (list_empty(&pipe_info->compl_free)) {
-		ath10k_warn("Completion buffers are full\n");
-		goto exit;
-	}
-	compl = list_first_entry(&pipe_info->compl_free,
-				 struct ath10k_pci_compl, list);
-	list_del(&compl->list);
-exit:
-	spin_unlock_bh(&pipe_info->pipe_lock);
-	return compl;
-}
-
 /* Called by lower (CE) layer when a send to Target completes. */
 static void ath10k_pci_ce_send_done(struct ath10k_ce_pipe *ce_state)
 {
 	struct ath10k *ar = ce_state->ar;
 	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
-	struct ath10k_pci_pipe *pipe_info =  &ar_pci->pipe_info[ce_state->id];
-	struct ath10k_pci_compl *compl;
+	struct ath10k_hif_cb *cb = &ar_pci->msg_callbacks_current;
 	void *transfer_context;
 	u32 ce_data;
 	unsigned int nbytes;
@@ -718,27 +694,8 @@ static void ath10k_pci_ce_send_done(struct ath10k_ce_pipe *ce_state)
 		if (transfer_context == NULL)
 			continue;
 
-		compl = get_free_compl(pipe_info);
-		if (!compl)
-			break;
-
-		compl->state = ATH10K_PCI_COMPL_SEND;
-		compl->ce_state = ce_state;
-		compl->pipe_info = pipe_info;
-		compl->skb = transfer_context;
-		compl->nbytes = nbytes;
-		compl->transfer_id = transfer_id;
-		compl->flags = 0;
-
-		/*
-		 * Add the completion to the processing queue.
-		 */
-		spin_lock_bh(&ar_pci->compl_lock);
-		list_add_tail(&compl->list, &ar_pci->compl_process);
-		spin_unlock_bh(&ar_pci->compl_lock);
+		cb->tx_completion(ar, transfer_context, transfer_id);
 	}
-
-	ath10k_pci_process_ce(ar);
 }
 
 /* Called by lower (CE) layer when data is received from the Target. */
@@ -747,42 +704,40 @@ static void ath10k_pci_ce_recv_data(struct ath10k_ce_pipe *ce_state)
 	struct ath10k *ar = ce_state->ar;
 	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
 	struct ath10k_pci_pipe *pipe_info =  &ar_pci->pipe_info[ce_state->id];
-	struct ath10k_pci_compl *compl;
+	struct ath10k_hif_cb *cb = &ar_pci->msg_callbacks_current;
 	struct sk_buff *skb;
 	void *transfer_context;
 	u32 ce_data;
-	unsigned int nbytes;
+	unsigned int nbytes, max_nbytes;
 	unsigned int transfer_id;
 	unsigned int flags;
+	int err;
 
 	while (ath10k_ce_completed_recv_next(ce_state, &transfer_context,
 					     &ce_data, &nbytes, &transfer_id,
 					     &flags) == 0) {
-		compl = get_free_compl(pipe_info);
-		if (!compl)
-			break;
-
-		compl->state = ATH10K_PCI_COMPL_RECV;
-		compl->ce_state = ce_state;
-		compl->pipe_info = pipe_info;
-		compl->skb = transfer_context;
-		compl->nbytes = nbytes;
-		compl->transfer_id = transfer_id;
-		compl->flags = flags;
+		err = ath10k_pci_post_rx_pipe(pipe_info, 1);
+		if (unlikely(err)) {
+			/* FIXME: retry */
+			ath10k_warn("failed to replenish CE rx ring %d: %d\n",
+				    pipe_info->pipe_num, err);
+		}
 
 		skb = transfer_context;
+		max_nbytes = skb->len + skb_tailroom(skb);
 		dma_unmap_single(ar->dev, ATH10K_SKB_CB(skb)->paddr,
-				 skb->len + skb_tailroom(skb),
-				 DMA_FROM_DEVICE);
-		/*
-		 * Add the completion to the processing queue.
-		 */
-		spin_lock_bh(&ar_pci->compl_lock);
-		list_add_tail(&compl->list, &ar_pci->compl_process);
-		spin_unlock_bh(&ar_pci->compl_lock);
-	}
+				 max_nbytes, DMA_FROM_DEVICE);
 
-	ath10k_pci_process_ce(ar);
+		if (unlikely(max_nbytes < nbytes)) {
+			ath10k_warn("rxed more than expected (nbytes %d, max %d)",
+				    nbytes, max_nbytes);
+			dev_kfree_skb_any(skb);
+			continue;
+		}
+
+		skb_put(skb, nbytes);
+		cb->rx_completion(ar, skb, pipe_info->pipe_num);
+	}
 }
 
 static int ath10k_pci_hif_tx_sg(struct ath10k *ar, u8 pipe_id,
@@ -931,52 +886,6 @@ static void ath10k_pci_hif_set_callbacks(struct ath10k *ar,
 	       sizeof(ar_pci->msg_callbacks_current));
 }
 
-static int ath10k_pci_alloc_compl(struct ath10k *ar)
-{
-	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
-	const struct ce_attr *attr;
-	struct ath10k_pci_pipe *pipe_info;
-	struct ath10k_pci_compl *compl;
-	int i, pipe_num, completions;
-
-	spin_lock_init(&ar_pci->compl_lock);
-	INIT_LIST_HEAD(&ar_pci->compl_process);
-
-	for (pipe_num = 0; pipe_num < CE_COUNT; pipe_num++) {
-		pipe_info = &ar_pci->pipe_info[pipe_num];
-
-		spin_lock_init(&pipe_info->pipe_lock);
-		INIT_LIST_HEAD(&pipe_info->compl_free);
-
-		/* Handle Diagnostic CE specially */
-		if (pipe_info->ce_hdl == ar_pci->ce_diag)
-			continue;
-
-		attr = &host_ce_config_wlan[pipe_num];
-		completions = 0;
-
-		if (attr->src_nentries)
-			completions += attr->src_nentries;
-
-		if (attr->dest_nentries)
-			completions += attr->dest_nentries;
-
-		for (i = 0; i < completions; i++) {
-			compl = kmalloc(sizeof(*compl), GFP_KERNEL);
-			if (!compl) {
-				ath10k_warn("No memory for completion state\n");
-				ath10k_pci_cleanup_ce(ar);
-				return -ENOMEM;
-			}
-
-			compl->state = ATH10K_PCI_COMPL_FREE;
-			list_add_tail(&compl->list, &pipe_info->compl_free);
-		}
-	}
-
-	return 0;
-}
-
 static int ath10k_pci_setup_ce_irq(struct ath10k *ar)
 {
 	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
@@ -1021,131 +930,6 @@ static void ath10k_pci_kill_tasklet(struct ath10k *ar)
 		tasklet_kill(&ar_pci->pipe_info[i].intr);
 }
 
-static void ath10k_pci_cleanup_ce(struct ath10k *ar)
-{
-	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
-	struct ath10k_pci_compl *compl, *tmp;
-	struct ath10k_pci_pipe *pipe_info;
-	struct sk_buff *netbuf;
-	int pipe_num;
-
-	/* Free pending completions. */
-	spin_lock_bh(&ar_pci->compl_lock);
-	if (!list_empty(&ar_pci->compl_process))
-		ath10k_warn("pending completions still present! possible memory leaks.\n");
-
-	list_for_each_entry_safe(compl, tmp, &ar_pci->compl_process, list) {
-		list_del(&compl->list);
-		netbuf = compl->skb;
-		dev_kfree_skb_any(netbuf);
-		kfree(compl);
-	}
-	spin_unlock_bh(&ar_pci->compl_lock);
-
-	/* Free unused completions for each pipe. */
-	for (pipe_num = 0; pipe_num < CE_COUNT; pipe_num++) {
-		pipe_info = &ar_pci->pipe_info[pipe_num];
-
-		spin_lock_bh(&pipe_info->pipe_lock);
-		list_for_each_entry_safe(compl, tmp,
-					 &pipe_info->compl_free, list) {
-			list_del(&compl->list);
-			kfree(compl);
-		}
-		spin_unlock_bh(&pipe_info->pipe_lock);
-	}
-}
-
-static void ath10k_pci_process_ce(struct ath10k *ar)
-{
-	struct ath10k_pci *ar_pci = ar->hif.priv;
-	struct ath10k_hif_cb *cb = &ar_pci->msg_callbacks_current;
-	struct ath10k_pci_compl *compl;
-	struct sk_buff *skb;
-	unsigned int nbytes;
-	int ret, send_done = 0;
-
-	/* Upper layers aren't ready to handle tx/rx completions in parallel so
-	 * we must serialize all completion processing. */
-
-	spin_lock_bh(&ar_pci->compl_lock);
-	if (ar_pci->compl_processing) {
-		spin_unlock_bh(&ar_pci->compl_lock);
-		return;
-	}
-	ar_pci->compl_processing = true;
-	spin_unlock_bh(&ar_pci->compl_lock);
-
-	for (;;) {
-		spin_lock_bh(&ar_pci->compl_lock);
-		if (list_empty(&ar_pci->compl_process)) {
-			spin_unlock_bh(&ar_pci->compl_lock);
-			break;
-		}
-		compl = list_first_entry(&ar_pci->compl_process,
-					 struct ath10k_pci_compl, list);
-		list_del(&compl->list);
-		spin_unlock_bh(&ar_pci->compl_lock);
-
-		switch (compl->state) {
-		case ATH10K_PCI_COMPL_SEND:
-			cb->tx_completion(ar,
-					  compl->skb,
-					  compl->transfer_id);
-			send_done = 1;
-			break;
-		case ATH10K_PCI_COMPL_RECV:
-			ret = ath10k_pci_post_rx_pipe(compl->pipe_info, 1);
-			if (ret) {
-				ath10k_warn("failed to post RX buffer for pipe %d: %d\n",
-					    compl->pipe_info->pipe_num, ret);
-				break;
-			}
-
-			skb = compl->skb;
-			nbytes = compl->nbytes;
-
-			ath10k_dbg(ATH10K_DBG_PCI,
-				   "ath10k_pci_ce_recv_data netbuf=%p  nbytes=%d\n",
-				   skb, nbytes);
-			ath10k_dbg_dump(ATH10K_DBG_PCI_DUMP, NULL,
-					"ath10k rx: ", skb->data, nbytes);
-
-			if (skb->len + skb_tailroom(skb) >= nbytes) {
-				skb_trim(skb, 0);
-				skb_put(skb, nbytes);
-				cb->rx_completion(ar, skb,
-						  compl->pipe_info->pipe_num);
-			} else {
-				ath10k_warn("rxed more than expected (nbytes %d, max %d)",
-					    nbytes,
-					    skb->len + skb_tailroom(skb));
-			}
-			break;
-		case ATH10K_PCI_COMPL_FREE:
-			ath10k_warn("free completion cannot be processed\n");
-			break;
-		default:
-			ath10k_warn("invalid completion state (%d)\n",
-				    compl->state);
-			break;
-		}
-
-		compl->state = ATH10K_PCI_COMPL_FREE;
-
-		/*
-		 * Add completion back to the pipe's free list.
-		 */
-		spin_lock_bh(&compl->pipe_info->pipe_lock);
-		list_add_tail(&compl->list, &compl->pipe_info->compl_free);
-		spin_unlock_bh(&compl->pipe_info->pipe_lock);
-	}
-
-	spin_lock_bh(&ar_pci->compl_lock);
-	ar_pci->compl_processing = false;
-	spin_unlock_bh(&ar_pci->compl_lock);
-}
-
 /* TODO - temporary mapping while we have too few CE's */
 static int ath10k_pci_hif_map_service_to_pipe(struct ath10k *ar,
 					      u16 service_id, u8 *ul_pipe,
@@ -1317,17 +1101,11 @@ static int ath10k_pci_hif_start(struct ath10k *ar)
 	ath10k_pci_free_early_irq(ar);
 	ath10k_pci_kill_tasklet(ar);
 
-	ret = ath10k_pci_alloc_compl(ar);
-	if (ret) {
-		ath10k_warn("failed to allocate CE completions: %d\n", ret);
-		goto err_early_irq;
-	}
-
 	ret = ath10k_pci_request_irq(ar);
 	if (ret) {
 		ath10k_warn("failed to post RX buffers for all pipes: %d\n",
 			    ret);
-		goto err_free_compl;
+		goto err_early_irq;
 	}
 
 	ret = ath10k_pci_setup_ce_irq(ar);
@@ -1351,9 +1129,6 @@ err_stop:
 	ath10k_ce_disable_interrupts(ar);
 	ath10k_pci_free_irq(ar);
 	ath10k_pci_kill_tasklet(ar);
-	ath10k_pci_process_ce(ar);
-err_free_compl:
-	ath10k_pci_cleanup_ce(ar);
 err_early_irq:
 	/* Though there should be no interrupts (device was reset)
 	 * power_down() expects the early IRQ to be installed as per the
@@ -1494,8 +1269,6 @@ static void ath10k_pci_hif_stop(struct ath10k *ar)
 	 * not DMA nor interrupt. We process the leftovers and then free
 	 * everything else up. */
 
-	ath10k_pci_process_ce(ar);
-	ath10k_pci_cleanup_ce(ar);
 	ath10k_pci_buffer_cleanup(ar);
 
 	/* Make the sure the device won't access any structures on the host by
diff --git a/drivers/net/wireless/ath/ath10k/pci.h b/drivers/net/wireless/ath/ath10k/pci.h
index a4f32038c440..b43fdb4f7319 100644
--- a/drivers/net/wireless/ath/ath10k/pci.h
+++ b/drivers/net/wireless/ath/ath10k/pci.h
@@ -43,23 +43,6 @@ struct bmi_xfer {
 	u32 resp_len;
 };
 
-enum ath10k_pci_compl_state {
-	ATH10K_PCI_COMPL_FREE = 0,
-	ATH10K_PCI_COMPL_SEND,
-	ATH10K_PCI_COMPL_RECV,
-};
-
-struct ath10k_pci_compl {
-	struct list_head list;
-	enum ath10k_pci_compl_state state;
-	struct ath10k_ce_pipe *ce_state;
-	struct ath10k_pci_pipe *pipe_info;
-	struct sk_buff *skb;
-	unsigned int nbytes;
-	unsigned int transfer_id;
-	unsigned int flags;
-};
-
 /*
  * PCI-specific Target state
  *
@@ -175,9 +158,6 @@ struct ath10k_pci_pipe {
 	/* protects compl_free and num_send_allowed */
 	spinlock_t pipe_lock;
 
-	/* List of free CE completion slots */
-	struct list_head compl_free;
-
 	struct ath10k_pci *ar_pci;
 	struct tasklet_struct intr;
 };
@@ -205,14 +185,6 @@ struct ath10k_pci {
 	atomic_t keep_awake_count;
 	bool verified_awake;
 
-	/* List of CE completions to be processed */
-	struct list_head compl_process;
-
-	/* protects compl_processing and compl_process */
-	spinlock_t compl_lock;
-
-	bool compl_processing;
-
 	struct ath10k_pci_pipe pipe_info[CE_COUNT_MAX];
 
 	struct ath10k_hif_cb msg_callbacks_current;
-- 
cgit v1.2.2


From 8d60ee87a7040973705247c9c8dfa11be1115709 Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Thu, 27 Feb 2014 18:50:05 +0200
Subject: ath10k: minimize coherent dma accesses

It doesn't make much sense to calculate the ring
size fill count because it already is memoized in
a separate variable.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/htt_rx.c | 15 ++++-----------
 1 file changed, 4 insertions(+), 11 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index 8e708dfb63e3..36a3871097a2 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -225,12 +225,6 @@ static void ath10k_htt_rx_ring_refill_retry(unsigned long arg)
 	ath10k_htt_rx_msdu_buff_replenish(htt);
 }
 
-static unsigned ath10k_htt_rx_ring_elems(struct ath10k_htt *htt)
-{
-	return (__le32_to_cpu(*htt->rx_ring.alloc_idx.vaddr) -
-		htt->rx_ring.sw_rd_idx.msdu_payld) & htt->rx_ring.size_mask;
-}
-
 void ath10k_htt_rx_detach(struct ath10k_htt *htt)
 {
 	int sw_rd_idx = htt->rx_ring.sw_rd_idx.msdu_payld;
@@ -276,8 +270,10 @@ static inline struct sk_buff *ath10k_htt_rx_netbuf_pop(struct ath10k_htt *htt)
 
 	lockdep_assert_held(&htt->rx_ring.lock);
 
-	if (ath10k_htt_rx_ring_elems(htt) == 0)
-		ath10k_warn("htt rx ring is empty!\n");
+	if (htt->rx_ring.fill_cnt == 0) {
+		ath10k_warn("tried to pop sk_buff from an empty rx ring\n");
+		return NULL;
+	}
 
 	idx = htt->rx_ring.sw_rd_idx.msdu_payld;
 	msdu = htt->rx_ring.netbufs_ring[idx];
@@ -312,9 +308,6 @@ static int ath10k_htt_rx_amsdu_pop(struct ath10k_htt *htt,
 
 	lockdep_assert_held(&htt->rx_ring.lock);
 
-	if (ath10k_htt_rx_ring_elems(htt) == 0)
-		ath10k_warn("htt rx ring is empty!\n");
-
 	if (htt->rx_confused) {
 		ath10k_warn("htt is confused. refusing rx\n");
 		return 0;
-- 
cgit v1.2.2


From 1f86c983bebbb226b69f986bdc7b8b4299a2004c Mon Sep 17 00:00:00 2001
From: Don Skidmore <donald.c.skidmore@intel.com>
Date: Thu, 27 Feb 2014 20:32:40 -0800
Subject: ixgbe: fix to use correct timeout interval for memory read completion

Currently we were just always polling for a hard coded 80 ms and not
respecting the system-wide timeout interval.  Since up until now all
devices have been tested with this 80ms value we continue to use this
value as a hard minimum.

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_common.c | 54 ++++++++++++++++++++++++-
 drivers/net/ethernet/intel/ixgbe/ixgbe_type.h   | 13 +++++-
 2 files changed, 64 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
index b5c434b617b1..2e84ee8a1071 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
@@ -2436,6 +2436,55 @@ out:
 	}
 }
 
+/**
+ * ixgbe_pcie_timeout_poll - Return number of times to poll for completion
+ * @hw: pointer to hardware structure
+ *
+ * System-wide timeout range is encoded in PCIe Device Control2 register.
+ *
+ *  Add 10% to specified maximum and return the number of times to poll for
+ *  completion timeout, in units of 100 microsec.  Never return less than
+ *  800 = 80 millisec.
+ **/
+static u32 ixgbe_pcie_timeout_poll(struct ixgbe_hw *hw)
+{
+	struct ixgbe_adapter *adapter = hw->back;
+	s16 devctl2;
+	u32 pollcnt;
+
+	pci_read_config_word(adapter->pdev, IXGBE_PCI_DEVICE_CONTROL2,
+			     &devctl2);
+	devctl2 &= IXGBE_PCIDEVCTRL2_TIMEO_MASK;
+
+	switch (devctl2) {
+	case IXGBE_PCIDEVCTRL2_65_130ms:
+		 pollcnt = 1300;         /* 130 millisec */
+		break;
+	case IXGBE_PCIDEVCTRL2_260_520ms:
+		pollcnt = 5200;         /* 520 millisec */
+		break;
+	case IXGBE_PCIDEVCTRL2_1_2s:
+		pollcnt = 20000;        /* 2 sec */
+		break;
+	case IXGBE_PCIDEVCTRL2_4_8s:
+		pollcnt = 80000;        /* 8 sec */
+		break;
+	case IXGBE_PCIDEVCTRL2_17_34s:
+		pollcnt = 34000;        /* 34 sec */
+		break;
+	case IXGBE_PCIDEVCTRL2_50_100us:        /* 100 microsecs */
+	case IXGBE_PCIDEVCTRL2_1_2ms:           /* 2 millisecs */
+	case IXGBE_PCIDEVCTRL2_16_32ms:         /* 32 millisec */
+	case IXGBE_PCIDEVCTRL2_16_32ms_def:     /* 32 millisec default */
+	default:
+		pollcnt = 800;          /* 80 millisec minimum */
+		break;
+	}
+
+	/* add 10% to spec maximum */
+	return (pollcnt * 11) / 10;
+}
+
 /**
  *  ixgbe_disable_pcie_master - Disable PCI-express master access
  *  @hw: pointer to hardware structure
@@ -2449,7 +2498,7 @@ static s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw)
 {
 	struct ixgbe_adapter *adapter = hw->back;
 	s32 status = 0;
-	u32 i;
+	u32 i, poll;
 	u16 value;
 
 	/* Always set this bit to ensure any future transactions are blocked */
@@ -2481,7 +2530,8 @@ static s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw)
 	 * Before proceeding, make sure that the PCIe block does not have
 	 * transactions pending.
 	 */
-	for (i = 0; i < IXGBE_PCI_MASTER_DISABLE_TIMEOUT; i++) {
+	poll = ixgbe_pcie_timeout_poll(hw);
+	for (i = 0; i < poll; i++) {
 		udelay(100);
 		pci_read_config_word(adapter->pdev, IXGBE_PCI_DEVICE_STATUS,
 							 &value);
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
index 9283cffd1b57..245819d7ec15 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
@@ -1854,8 +1854,19 @@ enum {
 #define IXGBE_PCI_HEADER_TYPE_MULTIFUNC 0x80
 #define IXGBE_PCI_DEVICE_CONTROL2_16ms  0x0005
 
+#define IXGBE_PCIDEVCTRL2_TIMEO_MASK	0xf
+#define IXGBE_PCIDEVCTRL2_16_32ms_def	0x0
+#define IXGBE_PCIDEVCTRL2_50_100us	0x1
+#define IXGBE_PCIDEVCTRL2_1_2ms		0x2
+#define IXGBE_PCIDEVCTRL2_16_32ms	0x5
+#define IXGBE_PCIDEVCTRL2_65_130ms	0x6
+#define IXGBE_PCIDEVCTRL2_260_520ms	0x9
+#define IXGBE_PCIDEVCTRL2_1_2s		0xa
+#define IXGBE_PCIDEVCTRL2_4_8s		0xd
+#define IXGBE_PCIDEVCTRL2_17_34s	0xe
+
 /* Number of 100 microseconds we wait for PCI Express master disable */
-#define IXGBE_PCI_MASTER_DISABLE_TIMEOUT 800
+#define IXGBE_PCI_MASTER_DISABLE_TIMEOUT	800
 
 /* RAH */
 #define IXGBE_RAH_VIND_MASK     0x003C0000
-- 
cgit v1.2.2


From 429d6a3be9b656f9400356f026328f3a2e900887 Mon Sep 17 00:00:00 2001
From: Don Skidmore <donald.c.skidmore@intel.com>
Date: Thu, 27 Feb 2014 20:32:41 -0800
Subject: ixgbe: collect all 82599 AUTOC code in one function

When reading or writing to the AUTOC register on 82599 devices we need to
preform various operations that aren't needed for other MAC types.  This
patch will collect all of that code into one place to minimize MAC checks
in common code paths.

While doing this I also clean up some cases where we weren't holding the
SW/FW semaphore during a read/modify/write of AUTOC.

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe.h        |   1 -
 drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c  |   2 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c  | 171 +++++++++++++-----------
 drivers/net/ethernet/intel/ixgbe/ixgbe_common.c | 118 ++++++++--------
 drivers/net/ethernet/intel/ixgbe/ixgbe_common.h |   5 +-
 drivers/net/ethernet/intel/ixgbe/ixgbe_type.h   |   3 +-
 drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c   |   2 +
 7 files changed, 161 insertions(+), 141 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
index 0186ea2969fe..cca13a5438e2 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
@@ -884,7 +884,6 @@ s32 ixgbe_fdir_erase_perfect_filter_82599(struct ixgbe_hw *hw,
 					  u16 soft_id);
 void ixgbe_atr_compute_perfect_hash_82599(union ixgbe_atr_input *input,
 					  union ixgbe_atr_input *mask);
-bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw);
 void ixgbe_set_rx_mode(struct net_device *netdev);
 #ifdef CONFIG_IXGBE_DCB
 void ixgbe_set_rx_drop_en(struct ixgbe_adapter *adapter);
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
index a26f3fee4f35..10e563cb847a 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
@@ -1316,6 +1316,8 @@ static struct ixgbe_mac_operations mac_ops_82598 = {
 	.get_thermal_sensor_data = NULL,
 	.init_thermal_sensor_thresh = NULL,
 	.mng_fw_enabled		= NULL,
+	.prot_autoc_read	= &prot_autoc_read_generic,
+	.prot_autoc_write	= &prot_autoc_write_generic,
 };
 
 static struct ixgbe_eeprom_operations eeprom_ops_82598 = {
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
index edda6814108c..1c31d2d62f75 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
@@ -63,6 +63,8 @@ static s32 ixgbe_read_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset,
 				     u8 dev_addr, u8 *data);
 static s32 ixgbe_write_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset,
 				      u8 dev_addr, u8 data);
+static s32 ixgbe_reset_pipeline_82599(struct ixgbe_hw *hw);
+static bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw);
 
 static bool ixgbe_mng_enabled(struct ixgbe_hw *hw)
 {
@@ -122,7 +124,6 @@ static s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw)
 {
 	s32 ret_val = 0;
 	u16 list_offset, data_offset, data_value;
-	bool got_lock = false;
 
 	if (hw->phy.sfp_type != ixgbe_sfp_type_unknown) {
 		ixgbe_init_mac_link_ops_82599(hw);
@@ -160,30 +161,10 @@ static s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw)
 		usleep_range(hw->eeprom.semaphore_delay * 1000,
 			     hw->eeprom.semaphore_delay * 2000);
 
-		/* Need SW/FW semaphore around AUTOC writes if LESM on,
-		 * likewise reset_pipeline requires lock as it also writes
-		 * AUTOC.
-		 */
-		if (ixgbe_verify_lesm_fw_enabled_82599(hw)) {
-			ret_val = hw->mac.ops.acquire_swfw_sync(hw,
-							IXGBE_GSSR_MAC_CSR_SM);
-			if (ret_val)
-				goto setup_sfp_out;
-
-			got_lock = true;
-		}
-
 		/* Restart DSP and set SFI mode */
-		IXGBE_WRITE_REG(hw, IXGBE_AUTOC, ((hw->mac.orig_autoc) |
-				IXGBE_AUTOC_LMS_10G_SERIAL));
-		hw->mac.cached_autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
-		ret_val = ixgbe_reset_pipeline_82599(hw);
-
-		if (got_lock) {
-			hw->mac.ops.release_swfw_sync(hw,
-						      IXGBE_GSSR_MAC_CSR_SM);
-			got_lock = false;
-		}
+		ret_val = hw->mac.ops.prot_autoc_write(hw,
+			hw->mac.orig_autoc | IXGBE_AUTOC_LMS_10G_SERIAL,
+			false);
 
 		if (ret_val) {
 			hw_dbg(hw, " sfp module setup not complete\n");
@@ -207,6 +188,74 @@ setup_sfp_err:
 	return IXGBE_ERR_SFP_SETUP_NOT_COMPLETE;
 }
 
+/**
+ *  prot_autoc_read_82599 - Hides MAC differences needed for AUTOC read
+ *  @hw: pointer to hardware structure
+ *  @locked: Return the if we locked for this read.
+ *  @reg_val: Value we read from AUTOC
+ *
+ *  For this part (82599) we need to wrap read-modify-writes with a possible
+ *  FW/SW lock.  It is assumed this lock will be freed with the next
+ *  prot_autoc_write_82599().  Note, that locked can only be true in cases
+ *  where this function doesn't return an error.
+ **/
+static s32 prot_autoc_read_82599(struct ixgbe_hw *hw, bool *locked,
+				 u32 *reg_val)
+{
+	s32 ret_val;
+
+	*locked = false;
+	/* If LESM is on then we need to hold the SW/FW semaphore. */
+	if (ixgbe_verify_lesm_fw_enabled_82599(hw)) {
+		ret_val = hw->mac.ops.acquire_swfw_sync(hw,
+					IXGBE_GSSR_MAC_CSR_SM);
+		if (!ret_val)
+			return IXGBE_ERR_SWFW_SYNC;
+
+		*locked = true;
+	}
+
+	*reg_val = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+	return 0;
+}
+
+/**
+ * prot_autoc_write_82599 - Hides MAC differences needed for AUTOC write
+ * @hw: pointer to hardware structure
+ * @reg_val: value to write to AUTOC
+ * @locked: bool to indicate whether the SW/FW lock was already taken by
+ *	     previous proc_autoc_read_82599.
+ *
+ * This part (82599) may need to hold a the SW/FW lock around all writes to
+ * AUTOC. Likewise after a write we need to do a pipeline reset.
+ **/
+static s32 prot_autoc_write_82599(struct ixgbe_hw *hw, u32 autoc, bool locked)
+{
+	s32 ret_val = 0;
+
+	/* We only need to get the lock if:
+	 *  - We didn't do it already (in the read part of a read-modify-write)
+	 *  - LESM is enabled.
+	 */
+	if (!locked && ixgbe_verify_lesm_fw_enabled_82599(hw)) {
+		ret_val = hw->mac.ops.acquire_swfw_sync(hw,
+					IXGBE_GSSR_MAC_CSR_SM);
+		if (!ret_val)
+			return IXGBE_ERR_SWFW_SYNC;
+	}
+
+	IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc);
+	ret_val = ixgbe_reset_pipeline_82599(hw);
+
+	/* Free the SW/FW semaphore as we either grabbed it here or
+	 * already had it when this function was called.
+	 */
+	if (locked)
+		hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
+
+	return ret_val;
+}
+
 static s32 ixgbe_get_invariants_82599(struct ixgbe_hw *hw)
 {
 	struct ixgbe_mac_info *mac = &hw->mac;
@@ -966,7 +1015,6 @@ static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw,
 	u32 links_reg;
 	u32 i;
 	ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN;
-	bool got_lock = false;
 	bool autoneg = false;
 
 	/* Check to see if speed passed in is supported. */
@@ -989,7 +1037,7 @@ static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw,
 		autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
 
 	orig_autoc = autoc;
-	start_autoc = hw->mac.cached_autoc;
+	start_autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
 	link_mode = autoc & IXGBE_AUTOC_LMS_MASK;
 	pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK;
 
@@ -1030,27 +1078,10 @@ static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw,
 	}
 
 	if (autoc != start_autoc) {
-		/* Need SW/FW semaphore around AUTOC writes if LESM is on,
-		 * likewise reset_pipeline requires us to hold this lock as
-		 * it also writes to AUTOC.
-		 */
-		if (ixgbe_verify_lesm_fw_enabled_82599(hw)) {
-			status = hw->mac.ops.acquire_swfw_sync(hw,
-							IXGBE_GSSR_MAC_CSR_SM);
-			if (status != 0)
-				goto out;
-
-			got_lock = true;
-		}
-
 		/* Restart link */
-		IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc);
-		hw->mac.cached_autoc = autoc;
-		ixgbe_reset_pipeline_82599(hw);
-
-		if (got_lock)
-			hw->mac.ops.release_swfw_sync(hw,
-						      IXGBE_GSSR_MAC_CSR_SM);
+		status = hw->mac.ops.prot_autoc_write(hw, autoc, false);
+		if (!status)
+			goto out;
 
 		/* Only poll for autoneg to complete if specified to do so */
 		if (autoneg_wait_to_complete) {
@@ -1117,7 +1148,7 @@ static s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw)
 {
 	ixgbe_link_speed link_speed;
 	s32 status;
-	u32 ctrl, i, autoc2;
+	u32 ctrl, i, autoc, autoc2;
 	u32 curr_lms;
 	bool link_up = false;
 
@@ -1151,11 +1182,7 @@ static s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw)
 		hw->phy.ops.reset(hw);
 
 	/* remember AUTOC from before we reset */
-	if (hw->mac.cached_autoc)
-		curr_lms = hw->mac.cached_autoc & IXGBE_AUTOC_LMS_MASK;
-	else
-		curr_lms = IXGBE_READ_REG(hw, IXGBE_AUTOC) &
-			   IXGBE_AUTOC_LMS_MASK;
+	curr_lms = IXGBE_READ_REG(hw, IXGBE_AUTOC) & IXGBE_AUTOC_LMS_MASK;
 
 mac_reset_top:
 	/*
@@ -1205,7 +1232,7 @@ mac_reset_top:
 	 * stored off yet.  Otherwise restore the stored original
 	 * values since the reset operation sets back to defaults.
 	 */
-	hw->mac.cached_autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+	autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
 	autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
 
 	/* Enable link if disabled in NVM */
@@ -1216,7 +1243,7 @@ mac_reset_top:
 	}
 
 	if (hw->mac.orig_link_settings_stored == false) {
-		hw->mac.orig_autoc = hw->mac.cached_autoc;
+		hw->mac.orig_autoc = autoc;
 		hw->mac.orig_autoc2 = autoc2;
 		hw->mac.orig_link_settings_stored = true;
 	} else {
@@ -1233,28 +1260,12 @@ mac_reset_top:
 				(hw->mac.orig_autoc & ~IXGBE_AUTOC_LMS_MASK) |
 				curr_lms;
 
-		if (hw->mac.cached_autoc != hw->mac.orig_autoc) {
-			/* Need SW/FW semaphore around AUTOC writes if LESM is
-			 * on, likewise reset_pipeline requires us to hold
-			 * this lock as it also writes to AUTOC.
-			 */
-			bool got_lock = false;
-			if (ixgbe_verify_lesm_fw_enabled_82599(hw)) {
-				status = hw->mac.ops.acquire_swfw_sync(hw,
-							IXGBE_GSSR_MAC_CSR_SM);
-				if (status)
-					goto reset_hw_out;
-
-				got_lock = true;
-			}
-
-			IXGBE_WRITE_REG(hw, IXGBE_AUTOC, hw->mac.orig_autoc);
-			hw->mac.cached_autoc = hw->mac.orig_autoc;
-			ixgbe_reset_pipeline_82599(hw);
-
-			if (got_lock)
-				hw->mac.ops.release_swfw_sync(hw,
-							IXGBE_GSSR_MAC_CSR_SM);
+		if (autoc != hw->mac.orig_autoc) {
+			status = hw->mac.ops.prot_autoc_write(hw,
+							hw->mac.orig_autoc,
+							false);
+			if (!status)
+				goto reset_hw_out;
 		}
 
 		if ((autoc2 & IXGBE_AUTOC2_UPPER_MASK) !=
@@ -2260,7 +2271,7 @@ fw_version_err:
  *  Returns true if the LESM FW module is present and enabled. Otherwise
  *  returns false. Smart Speed must be disabled if LESM FW module is enabled.
  **/
-bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw)
+static bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw)
 {
 	bool lesm_enabled = false;
 	u16 fw_offset, fw_lesm_param_offset, fw_lesm_state;
@@ -2366,7 +2377,7 @@ static s32 ixgbe_read_eeprom_82599(struct ixgbe_hw *hw,
  * full pipeline reset.  Note - We must hold the SW/FW semaphore before writing
  * to AUTOC, so this function assumes the semaphore is held.
  **/
-s32 ixgbe_reset_pipeline_82599(struct ixgbe_hw *hw)
+static s32 ixgbe_reset_pipeline_82599(struct ixgbe_hw *hw)
 {
 	s32 ret_val;
 	u32 anlp1_reg = 0;
@@ -2380,7 +2391,7 @@ s32 ixgbe_reset_pipeline_82599(struct ixgbe_hw *hw)
 		IXGBE_WRITE_FLUSH(hw);
 	}
 
-	autoc_reg = hw->mac.cached_autoc;
+	autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
 	autoc_reg |= IXGBE_AUTOC_AN_RESTART;
 
 	/* Write AUTOC register with toggled LMS[2] bit and Restart_AN */
@@ -2566,6 +2577,8 @@ static struct ixgbe_mac_operations mac_ops_82599 = {
 	.get_thermal_sensor_data = &ixgbe_get_thermal_sensor_data_generic,
 	.init_thermal_sensor_thresh = &ixgbe_init_thermal_sensor_thresh_generic,
 	.mng_fw_enabled		= &ixgbe_mng_enabled,
+	.prot_autoc_read	= &prot_autoc_read_82599,
+	.prot_autoc_write	= &prot_autoc_write_82599,
 };
 
 static struct ixgbe_eeprom_operations eeprom_ops_82599 = {
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
index 2e84ee8a1071..263143f53b21 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
@@ -114,7 +114,7 @@ static s32 ixgbe_setup_fc(struct ixgbe_hw *hw)
 	s32 ret_val = 0;
 	u32 reg = 0, reg_bp = 0;
 	u16 reg_cu = 0;
-	bool got_lock = false;
+	bool locked = false;
 
 	/*
 	 * Validate the requested mode.  Strict IEEE mode does not allow
@@ -139,11 +139,17 @@ static s32 ixgbe_setup_fc(struct ixgbe_hw *hw)
 	 * we link at 10G, the 1G advertisement is harmless and vice versa.
 	 */
 	switch (hw->phy.media_type) {
+	case ixgbe_media_type_backplane:
+		/* some MAC's need RMW protection on AUTOC */
+		ret_val = hw->mac.ops.prot_autoc_read(hw, &locked, &reg_bp);
+		if (!ret_val)
+			goto out;
+
+		/* only backplane uses autoc so fall though */
 	case ixgbe_media_type_fiber_fixed:
 	case ixgbe_media_type_fiber:
-	case ixgbe_media_type_backplane:
 		reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA);
-		reg_bp = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+
 		break;
 	case ixgbe_media_type_copper:
 		hw->phy.ops.read_reg(hw, MDIO_AN_ADVERTISE,
@@ -240,27 +246,12 @@ static s32 ixgbe_setup_fc(struct ixgbe_hw *hw)
 		 * LESM is on, likewise reset_pipeline requries the lock as
 		 * it also writes AUTOC.
 		 */
-		if ((hw->mac.type == ixgbe_mac_82599EB) &&
-		    ixgbe_verify_lesm_fw_enabled_82599(hw)) {
-			ret_val = hw->mac.ops.acquire_swfw_sync(hw,
-							IXGBE_GSSR_MAC_CSR_SM);
-			if (ret_val)
-				goto out;
-
-			got_lock = true;
-		}
-
-		IXGBE_WRITE_REG(hw, IXGBE_AUTOC, reg_bp);
-
-		if (hw->mac.type == ixgbe_mac_82599EB)
-			ixgbe_reset_pipeline_82599(hw);
-
-		if (got_lock)
-			hw->mac.ops.release_swfw_sync(hw,
-						      IXGBE_GSSR_MAC_CSR_SM);
+		ret_val = hw->mac.ops.prot_autoc_write(hw, reg_bp, locked);
+		if (ret_val)
+			goto out;
 
 	} else if ((hw->phy.media_type == ixgbe_media_type_copper) &&
-		    ixgbe_device_supports_autoneg_fc(hw)) {
+		   ixgbe_device_supports_autoneg_fc(hw)) {
 		hw->phy.ops.write_reg(hw, MDIO_AN_ADVERTISE,
 				      MDIO_MMD_AN, reg_cu);
 	}
@@ -2613,6 +2604,35 @@ void ixgbe_release_swfw_sync(struct ixgbe_hw *hw, u16 mask)
 	ixgbe_release_eeprom_semaphore(hw);
 }
 
+/**
+ * prot_autoc_read_generic - Hides MAC differences needed for AUTOC read
+ * @hw: pointer to hardware structure
+ * @reg_val: Value we read from AUTOC
+ * @locked: bool to indicate whether the SW/FW lock should be taken.  Never
+ *	    true in this the generic case.
+ *
+ * The default case requires no protection so just to the register read.
+ **/
+s32 prot_autoc_read_generic(struct ixgbe_hw *hw, bool *locked, u32 *reg_val)
+{
+	*locked = false;
+	*reg_val = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+	return 0;
+}
+
+/**
+ * prot_autoc_write_generic - Hides MAC differences needed for AUTOC write
+ * @hw: pointer to hardware structure
+ * @reg_val: value to write to AUTOC
+ * @locked: bool to indicate whether the SW/FW lock was already taken by
+ *	    previous read.
+ **/
+s32 prot_autoc_write_generic(struct ixgbe_hw *hw, u32 reg_val, bool locked)
+{
+	IXGBE_WRITE_REG(hw, IXGBE_AUTOC, reg_val);
+	return 0;
+}
+
 /**
  *  ixgbe_disable_rx_buff_generic - Stops the receive data path
  *  @hw: pointer to hardware structure
@@ -2691,6 +2711,7 @@ s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index)
 	u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
 	u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
 	s32 ret_val = 0;
+	bool locked = false;
 
 	/*
 	 * Link must be up to auto-blink the LEDs;
@@ -2699,28 +2720,19 @@ s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index)
 	hw->mac.ops.check_link(hw, &speed, &link_up, false);
 
 	if (!link_up) {
-		/* Need the SW/FW semaphore around AUTOC writes if 82599 and
-		 * LESM is on.
-		 */
-		bool got_lock = false;
-
-		if ((hw->mac.type == ixgbe_mac_82599EB) &&
-		    ixgbe_verify_lesm_fw_enabled_82599(hw)) {
-			ret_val = hw->mac.ops.acquire_swfw_sync(hw,
-							IXGBE_GSSR_MAC_CSR_SM);
-			if (ret_val)
-				goto out;
+		ret_val = hw->mac.ops.prot_autoc_read(hw, &locked, &autoc_reg);
+		if (!ret_val)
+			goto out;
 
-			got_lock = true;
-		}
 		autoc_reg |= IXGBE_AUTOC_AN_RESTART;
 		autoc_reg |= IXGBE_AUTOC_FLU;
-		IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
+
+		ret_val = hw->mac.ops.prot_autoc_write(hw, autoc_reg, locked);
+		if (!ret_val)
+			goto out;
+
 		IXGBE_WRITE_FLUSH(hw);
 
-		if (got_lock)
-			hw->mac.ops.release_swfw_sync(hw,
-						      IXGBE_GSSR_MAC_CSR_SM);
 		usleep_range(10000, 20000);
 	}
 
@@ -2740,33 +2752,21 @@ out:
  **/
 s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index)
 {
-	u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+	u32 autoc_reg = 0;
 	u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
 	s32 ret_val = 0;
-	bool got_lock = false;
+	bool locked = false;
 
-	/* Need the SW/FW semaphore around AUTOC writes if 82599 and
-	 * LESM is on.
-	 */
-	if ((hw->mac.type == ixgbe_mac_82599EB) &&
-	    ixgbe_verify_lesm_fw_enabled_82599(hw)) {
-		ret_val = hw->mac.ops.acquire_swfw_sync(hw,
-						IXGBE_GSSR_MAC_CSR_SM);
-		if (ret_val)
-			goto out;
-
-		got_lock = true;
-	}
+	ret_val = hw->mac.ops.prot_autoc_read(hw, &locked, &autoc_reg);
+	if (!ret_val)
+		goto out;
 
 	autoc_reg &= ~IXGBE_AUTOC_FLU;
 	autoc_reg |= IXGBE_AUTOC_AN_RESTART;
-	IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
 
-	if (hw->mac.type == ixgbe_mac_82599EB)
-		ixgbe_reset_pipeline_82599(hw);
-
-	if (got_lock)
-		hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
+	ret_val = hw->mac.ops.prot_autoc_write(hw, autoc_reg, locked);
+	if (!ret_val)
+		goto out;
 
 	led_reg &= ~IXGBE_LED_MODE_MASK(index);
 	led_reg &= ~IXGBE_LED_BLINK(index);
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
index f2e3919750ec..a042db2997f7 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
@@ -98,6 +98,10 @@ s32 ixgbe_check_mac_link_generic(struct ixgbe_hw *hw,
                                  bool *link_up, bool link_up_wait_to_complete);
 s32 ixgbe_get_wwn_prefix_generic(struct ixgbe_hw *hw, u16 *wwnn_prefix,
                                  u16 *wwpn_prefix);
+
+s32 prot_autoc_read_generic(struct ixgbe_hw *hw, bool *, u32 *reg_val);
+s32 prot_autoc_write_generic(struct ixgbe_hw *hw, u32 reg_val, bool locked);
+
 s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index);
 s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index);
 void ixgbe_set_mac_anti_spoofing(struct ixgbe_hw *hw, bool enable, int pf);
@@ -109,7 +113,6 @@ void ixgbe_clear_tx_pending(struct ixgbe_hw *hw);
 
 void ixgbe_set_rxpba_generic(struct ixgbe_hw *hw, int num_pb,
 			     u32 headroom, int strategy);
-s32 ixgbe_reset_pipeline_82599(struct ixgbe_hw *hw);
 
 #define IXGBE_I2C_THERMAL_SENSOR_ADDR	0xF8
 #define IXGBE_EMC_INTERNAL_DATA		0x00
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
index 245819d7ec15..692341f4e503 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
@@ -2870,6 +2870,8 @@ struct ixgbe_mac_operations {
 	s32 (*enable_rx_dma)(struct ixgbe_hw *, u32);
 	s32 (*acquire_swfw_sync)(struct ixgbe_hw *, u16);
 	void (*release_swfw_sync)(struct ixgbe_hw *, u16);
+	s32 (*prot_autoc_read)(struct ixgbe_hw *, bool *, u32 *);
+	s32 (*prot_autoc_write)(struct ixgbe_hw *, u32, bool);
 
 	/* Link */
 	void (*disable_tx_laser)(struct ixgbe_hw *);
@@ -2969,7 +2971,6 @@ struct ixgbe_mac_info {
 	u32                             max_tx_queues;
 	u32                             max_rx_queues;
 	u32                             orig_autoc;
-	u32                             cached_autoc;
 	u32                             orig_autoc2;
 	bool                            orig_link_settings_stored;
 	bool                            autotry_restart;
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
index 24b80a6cfca4..c870f37f15d3 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
@@ -855,6 +855,8 @@ static struct ixgbe_mac_operations mac_ops_X540 = {
 	.get_thermal_sensor_data = NULL,
 	.init_thermal_sensor_thresh = NULL,
 	.mng_fw_enabled		= NULL,
+	.prot_autoc_read	= &prot_autoc_read_generic,
+	.prot_autoc_write	= &prot_autoc_write_generic,
 };
 
 static struct ixgbe_eeprom_operations eeprom_ops_X540 = {
-- 
cgit v1.2.2


From 9f4d278ffbe9e657fb0c03573c2b682b8c9952aa Mon Sep 17 00:00:00 2001
From: Don Skidmore <donald.c.skidmore@intel.com>
Date: Thu, 27 Feb 2014 20:32:42 -0800
Subject: ixgbe: fix bit toggled for 82599 reset fix.

The current code doesn't toggle the correct bit to reset the data pipeline
on Restart_AN assertion.  This patch corrects that.

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
index 1c31d2d62f75..e919c28a70a6 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
@@ -2395,7 +2395,8 @@ static s32 ixgbe_reset_pipeline_82599(struct ixgbe_hw *hw)
 	autoc_reg |= IXGBE_AUTOC_AN_RESTART;
 
 	/* Write AUTOC register with toggled LMS[2] bit and Restart_AN */
-	IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg ^ IXGBE_AUTOC_LMS_1G_AN);
+	IXGBE_WRITE_REG(hw, IXGBE_AUTOC,
+			autoc_reg ^ (0x4 << IXGBE_AUTOC_LMS_SHIFT));
 
 	/* Wait for AN to leave state 0 */
 	for (i = 0; i < 10; i++) {
-- 
cgit v1.2.2


From c97506ab0e224613aa4fe9898f72d5e3eaf81772 Mon Sep 17 00:00:00 2001
From: Don Skidmore <donald.c.skidmore@intel.com>
Date: Thu, 27 Feb 2014 20:32:43 -0800
Subject: ixgbe: Add check for FW veto bit

The driver will now honor the MNG FW veto bit in blocking link resets.
This patch will affect x520 and x540 systems.

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c | 15 ++++++++-
 drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c   | 44 +++++++++++++++++++++++++-
 drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h   |  3 +-
 drivers/net/ethernet/intel/ixgbe/ixgbe_type.h  |  5 ++-
 4 files changed, 63 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
index e919c28a70a6..b96cefd5a2eb 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel 10 Gigabit PCI Express Linux driver
-  Copyright(c) 1999 - 2013 Intel Corporation.
+  Copyright(c) 1999 - 2014 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -233,6 +233,10 @@ static s32 prot_autoc_write_82599(struct ixgbe_hw *hw, u32 autoc, bool locked)
 {
 	s32 ret_val = 0;
 
+	/* Blocked by MNG FW so bail */
+	if (ixgbe_check_reset_blocked(hw))
+		goto out;
+
 	/* We only need to get the lock if:
 	 *  - We didn't do it already (in the read part of a read-modify-write)
 	 *  - LESM is enabled.
@@ -247,6 +251,7 @@ static s32 prot_autoc_write_82599(struct ixgbe_hw *hw, u32 autoc, bool locked)
 	IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc);
 	ret_val = ixgbe_reset_pipeline_82599(hw);
 
+out:
 	/* Free the SW/FW semaphore as we either grabbed it here or
 	 * already had it when this function was called.
 	 */
@@ -591,6 +596,10 @@ static void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
 {
 	u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
 
+	/* Blocked by MNG FW so bail */
+	if (ixgbe_check_reset_blocked(hw))
+		return;
+
 	/* Disable tx laser; allow 100us to go dark per spec */
 	esdp_reg |= IXGBE_ESDP_SDP3;
 	IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
@@ -631,6 +640,10 @@ static void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
  **/
 static void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
 {
+	/* Blocked by MNG FW so bail */
+	if (ixgbe_check_reset_blocked(hw))
+		return;
+
 	if (hw->mac.autotry_restart) {
 		ixgbe_disable_tx_laser_multispeed_fiber(hw);
 		ixgbe_enable_tx_laser_multispeed_fiber(hw);
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
index 132557c318f8..d2caae4750e0 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel 10 Gigabit PCI Express Linux driver
-  Copyright(c) 1999 - 2013 Intel Corporation.
+  Copyright(c) 1999 - 2014 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -97,6 +97,32 @@ s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw)
 	return status;
 }
 
+/**
+ * ixgbe_check_reset_blocked - check status of MNG FW veto bit
+ * @hw: pointer to the hardware structure
+ *
+ * This function checks the MMNGC.MNG_VETO bit to see if there are
+ * any constraints on link from manageability.  For MAC's that don't
+ * have this bit just return false since the link can not be blocked
+ * via this method.
+ **/
+s32 ixgbe_check_reset_blocked(struct ixgbe_hw *hw)
+{
+	u32 mmngc;
+
+	/* If we don't have this bit, it can't be blocking */
+	if (hw->mac.type == ixgbe_mac_82598EB)
+		return false;
+
+	mmngc = IXGBE_READ_REG(hw, IXGBE_MMNGC);
+	if (mmngc & IXGBE_MMNGC_MNG_VETO) {
+		hw_dbg(hw, "MNG_VETO bit detected.\n");
+		return true;
+	}
+
+	return false;
+}
+
 /**
  *  ixgbe_get_phy_id - Get the phy type
  *  @hw: pointer to hardware structure
@@ -172,6 +198,10 @@ s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw)
 	    (IXGBE_ERR_OVERTEMP == hw->phy.ops.check_overtemp(hw)))
 		goto out;
 
+	/* Blocked by MNG FW so bail */
+	if (ixgbe_check_reset_blocked(hw))
+		goto out;
+
 	/*
 	 * Perform soft PHY reset to the PHY_XS.
 	 * This will cause a soft reset to the PHY
@@ -476,6 +506,10 @@ s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw)
 				      autoneg_reg);
 	}
 
+	/* Blocked by MNG FW so don't reset PHY */
+	if (ixgbe_check_reset_blocked(hw))
+		return status;
+
 	/* Restart PHY autonegotiation and wait for completion */
 	hw->phy.ops.read_reg(hw, MDIO_CTRL1,
 			     MDIO_MMD_AN, &autoneg_reg);
@@ -682,6 +716,10 @@ s32 ixgbe_setup_phy_link_tnx(struct ixgbe_hw *hw)
 				      autoneg_reg);
 	}
 
+	/* Blocked by MNG FW so don't reset PHY */
+	if (ixgbe_check_reset_blocked(hw))
+		return status;
+
 	/* Restart PHY autonegotiation and wait for completion */
 	hw->phy.ops.read_reg(hw, MDIO_CTRL1,
 			     MDIO_MMD_AN, &autoneg_reg);
@@ -759,6 +797,10 @@ s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw)
 	s32 ret_val = 0;
 	u32 i;
 
+	/* Blocked by MNG FW so bail */
+	if (ixgbe_check_reset_blocked(hw))
+		goto out;
+
 	hw->phy.ops.read_reg(hw, MDIO_CTRL1, MDIO_MMD_PHYXS, &phy_data);
 
 	/* reset the PHY and poll for completion */
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
index fffcbdd2bf0e..b4d4323666b8 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel 10 Gigabit PCI Express Linux driver
-  Copyright(c) 1999 - 2013 Intel Corporation.
+  Copyright(c) 1999 - 2014 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -131,6 +131,7 @@ s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw,
 s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw,
                                                ixgbe_link_speed *speed,
                                                bool *autoneg);
+s32 ixgbe_check_reset_blocked(struct ixgbe_hw *hw);
 
 /* PHY specific */
 s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw,
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
index 692341f4e503..c10382e5aabc 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel 10 Gigabit PCI Express Linux driver
-  Copyright(c) 1999 - 2013 Intel Corporation.
+  Copyright(c) 1999 - 2014 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -1610,6 +1610,9 @@ enum {
 #define IXGBE_MACC_FS        0x00040000
 #define IXGBE_MAC_RX2TX_LPBK 0x00000002
 
+/* Veto Bit definiton */
+#define IXGBE_MMNGC_MNG_VETO  0x00000001
+
 /* LINKS Bit Masks */
 #define IXGBE_LINKS_KX_AN_COMP  0x80000000
 #define IXGBE_LINKS_UP          0x40000000
-- 
cgit v1.2.2


From b5d217f3a747648a016176d13cedfcce0da732ea Mon Sep 17 00:00:00 2001
From: Emil Tantilov <emil.s.tantilov@intel.com>
Date: Thu, 27 Feb 2014 20:32:44 -0800
Subject: ixgbevf: fix handling of tx checksumming

This patch resolves an issue introduced by:
commit 7ad1a093519e37fb673579819bf6af122641c397
ixgbevf: make the first tx_buffer a repository for most of the skb info

Incorrect check for the result of ixgbevf_tso() can lead to calling
ixgbevf_tx_csum() which can spawn 2 context descriptors and result in
performance degradation and/or corrupted packets.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
index a6af7b7c59b1..79023ba29fdc 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
@@ -3155,7 +3155,7 @@ static int ixgbevf_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 	tso = ixgbevf_tso(tx_ring, first, &hdr_len);
 	if (tso < 0)
 		goto out_drop;
-	else
+	else if (!tso)
 		ixgbevf_tx_csum(tx_ring, first);
 
 	ixgbevf_tx_map(tx_ring, first, hdr_len);
-- 
cgit v1.2.2


From 01a545cf21e7514f0b384328e6387e637a07e333 Mon Sep 17 00:00:00 2001
From: Emil Tantilov <emil.s.tantilov@intel.com>
Date: Thu, 27 Feb 2014 20:32:45 -0800
Subject: ixgbevf: add check for CHECKSUM_PARTIAL when doing TSO

This patch adds check for CHECKSUM_PARTIAL to avoid the skb_is_gso check
in ixgbevf_tso(). It should reduce overhead for workloads that are not using
TSO or checksum offloads. It is the same as in ixgbe.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
index 79023ba29fdc..57e0cd89b3dc 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
@@ -2777,6 +2777,9 @@ static int ixgbevf_tso(struct ixgbevf_ring *tx_ring,
 	u32 vlan_macip_lens, type_tucmd;
 	u32 mss_l4len_idx, l4len;
 
+	if (skb->ip_summed != CHECKSUM_PARTIAL)
+		return 0;
+
 	if (!skb_is_gso(skb))
 		return 0;
 
-- 
cgit v1.2.2


From 946651cba26779864bcdbd7e12502f5a36c2de37 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Sat, 15 Feb 2014 00:05:52 +0100
Subject: wl1251: split wl251 platform data to a separate structure

Move the wl1251 part of the wl12xx platform data structure into a new
structure specifically for wl1251.  Change the platform data built-in
block and board files accordingly.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Reviewed-by: Sebastian Reichel <sre@debian.org>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ti/wilink_platform_data.c | 37 +++++++++++++++++++++-----
 drivers/net/wireless/ti/wl1251/sdio.c          | 12 ++++-----
 drivers/net/wireless/ti/wl1251/spi.c           |  2 +-
 3 files changed, 38 insertions(+), 13 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ti/wilink_platform_data.c b/drivers/net/wireless/ti/wilink_platform_data.c
index 998e95895f9d..a92bd3e89796 100644
--- a/drivers/net/wireless/ti/wilink_platform_data.c
+++ b/drivers/net/wireless/ti/wilink_platform_data.c
@@ -23,17 +23,17 @@
 #include <linux/err.h>
 #include <linux/wl12xx.h>
 
-static struct wl12xx_platform_data *platform_data;
+static struct wl12xx_platform_data *wl12xx_platform_data;
 
 int __init wl12xx_set_platform_data(const struct wl12xx_platform_data *data)
 {
-	if (platform_data)
+	if (wl12xx_platform_data)
 		return -EBUSY;
 	if (!data)
 		return -EINVAL;
 
-	platform_data = kmemdup(data, sizeof(*data), GFP_KERNEL);
-	if (!platform_data)
+	wl12xx_platform_data = kmemdup(data, sizeof(*data), GFP_KERNEL);
+	if (!wl12xx_platform_data)
 		return -ENOMEM;
 
 	return 0;
@@ -41,9 +41,34 @@ int __init wl12xx_set_platform_data(const struct wl12xx_platform_data *data)
 
 struct wl12xx_platform_data *wl12xx_get_platform_data(void)
 {
-	if (!platform_data)
+	if (!wl12xx_platform_data)
 		return ERR_PTR(-ENODEV);
 
-	return platform_data;
+	return wl12xx_platform_data;
 }
 EXPORT_SYMBOL(wl12xx_get_platform_data);
+
+static struct wl1251_platform_data *wl1251_platform_data;
+
+int __init wl1251_set_platform_data(const struct wl1251_platform_data *data)
+{
+	if (wl1251_platform_data)
+		return -EBUSY;
+	if (!data)
+		return -EINVAL;
+
+	wl1251_platform_data = kmemdup(data, sizeof(*data), GFP_KERNEL);
+	if (!wl1251_platform_data)
+		return -ENOMEM;
+
+	return 0;
+}
+
+struct wl1251_platform_data *wl1251_get_platform_data(void)
+{
+	if (!wl1251_platform_data)
+		return ERR_PTR(-ENODEV);
+
+	return wl1251_platform_data;
+}
+EXPORT_SYMBOL(wl1251_get_platform_data);
diff --git a/drivers/net/wireless/ti/wl1251/sdio.c b/drivers/net/wireless/ti/wl1251/sdio.c
index e2b3d9c541e8..b75a37a58313 100644
--- a/drivers/net/wireless/ti/wl1251/sdio.c
+++ b/drivers/net/wireless/ti/wl1251/sdio.c
@@ -227,7 +227,7 @@ static int wl1251_sdio_probe(struct sdio_func *func,
 	struct wl1251 *wl;
 	struct ieee80211_hw *hw;
 	struct wl1251_sdio *wl_sdio;
-	const struct wl12xx_platform_data *wl12xx_board_data;
+	const struct wl1251_platform_data *wl1251_board_data;
 
 	hw = wl1251_alloc_hw();
 	if (IS_ERR(hw))
@@ -254,11 +254,11 @@ static int wl1251_sdio_probe(struct sdio_func *func,
 	wl->if_priv = wl_sdio;
 	wl->if_ops = &wl1251_sdio_ops;
 
-	wl12xx_board_data = wl12xx_get_platform_data();
-	if (!IS_ERR(wl12xx_board_data)) {
-		wl->set_power = wl12xx_board_data->set_power;
-		wl->irq = wl12xx_board_data->irq;
-		wl->use_eeprom = wl12xx_board_data->use_eeprom;
+	wl1251_board_data = wl1251_get_platform_data();
+	if (!IS_ERR(wl1251_board_data)) {
+		wl->set_power = wl1251_board_data->set_power;
+		wl->irq = wl1251_board_data->irq;
+		wl->use_eeprom = wl1251_board_data->use_eeprom;
 	}
 
 	if (wl->irq) {
diff --git a/drivers/net/wireless/ti/wl1251/spi.c b/drivers/net/wireless/ti/wl1251/spi.c
index 1342f81e683d..62403a147592 100644
--- a/drivers/net/wireless/ti/wl1251/spi.c
+++ b/drivers/net/wireless/ti/wl1251/spi.c
@@ -238,7 +238,7 @@ static const struct wl1251_if_operations wl1251_spi_ops = {
 
 static int wl1251_spi_probe(struct spi_device *spi)
 {
-	struct wl12xx_platform_data *pdata;
+	struct wl1251_platform_data *pdata;
 	struct ieee80211_hw *hw;
 	struct wl1251 *wl;
 	int ret;
-- 
cgit v1.2.2


From 1d207cd30b65fdd60d952cb9e100b6f776564f06 Mon Sep 17 00:00:00 2001
From: Sebastian Reichel <sre@debian.org>
Date: Sat, 15 Feb 2014 00:05:53 +0100
Subject: wl1251: move power GPIO handling into the driver

Move the power GPIO handling from the board code into
the driver. This is a dependency for device tree support.

Signed-off-by: Sebastian Reichel <sre@debian.org>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ti/wl1251/sdio.c   | 21 ++++++++++++++++-----
 drivers/net/wireless/ti/wl1251/spi.c    | 33 +++++++++++++++++++++------------
 drivers/net/wireless/ti/wl1251/wl1251.h |  2 +-
 3 files changed, 38 insertions(+), 18 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ti/wl1251/sdio.c b/drivers/net/wireless/ti/wl1251/sdio.c
index b75a37a58313..b661f896e9fe 100644
--- a/drivers/net/wireless/ti/wl1251/sdio.c
+++ b/drivers/net/wireless/ti/wl1251/sdio.c
@@ -28,6 +28,7 @@
 #include <linux/wl12xx.h>
 #include <linux/irq.h>
 #include <linux/pm_runtime.h>
+#include <linux/gpio.h>
 
 #include "wl1251.h"
 
@@ -182,8 +183,9 @@ static int wl1251_sdio_set_power(struct wl1251 *wl, bool enable)
 		 * callback in case it wants to do any additional setup,
 		 * for example enabling clock buffer for the module.
 		 */
-		if (wl->set_power)
-			wl->set_power(true);
+		if (gpio_is_valid(wl->power_gpio))
+			gpio_set_value(wl->power_gpio, true);
+
 
 		ret = pm_runtime_get_sync(&func->dev);
 		if (ret < 0) {
@@ -203,8 +205,8 @@ static int wl1251_sdio_set_power(struct wl1251 *wl, bool enable)
 		if (ret < 0)
 			goto out;
 
-		if (wl->set_power)
-			wl->set_power(false);
+		if (gpio_is_valid(wl->power_gpio))
+			gpio_set_value(wl->power_gpio, false);
 	}
 
 out:
@@ -256,11 +258,20 @@ static int wl1251_sdio_probe(struct sdio_func *func,
 
 	wl1251_board_data = wl1251_get_platform_data();
 	if (!IS_ERR(wl1251_board_data)) {
-		wl->set_power = wl1251_board_data->set_power;
+		wl->power_gpio = wl1251_board_data->power_gpio;
 		wl->irq = wl1251_board_data->irq;
 		wl->use_eeprom = wl1251_board_data->use_eeprom;
 	}
 
+	if (gpio_is_valid(wl->power_gpio)) {
+		ret = devm_gpio_request(&func->dev, wl->power_gpio,
+								"wl1251 power");
+		if (ret) {
+			wl1251_error("Failed to request gpio: %d\n", ret);
+			goto disable;
+		}
+	}
+
 	if (wl->irq) {
 		irq_set_status_flags(wl->irq, IRQ_NOAUTOEN);
 		ret = request_irq(wl->irq, wl1251_line_irq, 0, "wl1251", wl);
diff --git a/drivers/net/wireless/ti/wl1251/spi.c b/drivers/net/wireless/ti/wl1251/spi.c
index 62403a147592..6abcbc3f7fc7 100644
--- a/drivers/net/wireless/ti/wl1251/spi.c
+++ b/drivers/net/wireless/ti/wl1251/spi.c
@@ -26,6 +26,7 @@
 #include <linux/crc7.h>
 #include <linux/spi/spi.h>
 #include <linux/wl12xx.h>
+#include <linux/gpio.h>
 
 #include "wl1251.h"
 #include "reg.h"
@@ -221,8 +222,8 @@ static void wl1251_spi_disable_irq(struct wl1251 *wl)
 
 static int wl1251_spi_set_power(struct wl1251 *wl, bool enable)
 {
-	if (wl->set_power)
-		wl->set_power(enable);
+	if (gpio_is_valid(wl->power_gpio))
+		gpio_set_value(wl->power_gpio, enable);
 
 	return 0;
 }
@@ -271,22 +272,33 @@ static int wl1251_spi_probe(struct spi_device *spi)
 		goto out_free;
 	}
 
-	wl->set_power = pdata->set_power;
-	if (!wl->set_power) {
-		wl1251_error("set power function missing in platform data");
-		return -ENODEV;
+	wl->power_gpio = pdata->power_gpio;
+
+	if (gpio_is_valid(wl->power_gpio)) {
+		ret = devm_gpio_request_one(&spi->dev, wl->power_gpio,
+					GPIOF_OUT_INIT_LOW, "wl1251 power");
+		if (ret) {
+			wl1251_error("Failed to request gpio: %d\n", ret);
+			goto out_free;
+		}
+	} else {
+		wl1251_error("set power gpio missing in platform data");
+		ret = -ENODEV;
+		goto out_free;
 	}
 
 	wl->irq = spi->irq;
 	if (wl->irq < 0) {
 		wl1251_error("irq missing in platform data");
-		return -ENODEV;
+		ret = -ENODEV;
+		goto out_free;
 	}
 
 	wl->use_eeprom = pdata->use_eeprom;
 
 	irq_set_status_flags(wl->irq, IRQ_NOAUTOEN);
-	ret = request_irq(wl->irq, wl1251_irq, 0, DRIVER_NAME, wl);
+	ret = devm_request_irq(&spi->dev, wl->irq, wl1251_irq, 0,
+							DRIVER_NAME, wl);
 	if (ret < 0) {
 		wl1251_error("request_irq() failed: %d", ret);
 		goto out_free;
@@ -296,13 +308,10 @@ static int wl1251_spi_probe(struct spi_device *spi)
 
 	ret = wl1251_init_ieee80211(wl);
 	if (ret)
-		goto out_irq;
+		goto out_free;
 
 	return 0;
 
- out_irq:
-	free_irq(wl->irq, wl);
-
  out_free:
 	ieee80211_free_hw(hw);
 
diff --git a/drivers/net/wireless/ti/wl1251/wl1251.h b/drivers/net/wireless/ti/wl1251/wl1251.h
index 235617a7716d..389fe25af1b6 100644
--- a/drivers/net/wireless/ti/wl1251/wl1251.h
+++ b/drivers/net/wireless/ti/wl1251/wl1251.h
@@ -276,7 +276,7 @@ struct wl1251 {
 	void *if_priv;
 	const struct wl1251_if_operations *if_ops;
 
-	void (*set_power)(bool enable);
+	int power_gpio;
 	int irq;
 	bool use_eeprom;
 
-- 
cgit v1.2.2


From e4c2e09e1534835c749de362b9b38e2d8b286236 Mon Sep 17 00:00:00 2001
From: Sebastian Reichel <sre@debian.org>
Date: Sat, 15 Feb 2014 00:05:54 +0100
Subject: wl1251: spi: add vio regulator support

This patch adds support for requesting the regulator powering
the vio pin.

Signed-off-by: Sebastian Reichel <sre@debian.org>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ti/wl1251/spi.c    | 19 +++++++++++++++++--
 drivers/net/wireless/ti/wl1251/wl1251.h |  2 ++
 2 files changed, 19 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ti/wl1251/spi.c b/drivers/net/wireless/ti/wl1251/spi.c
index 6abcbc3f7fc7..0a8aacceedd1 100644
--- a/drivers/net/wireless/ti/wl1251/spi.c
+++ b/drivers/net/wireless/ti/wl1251/spi.c
@@ -27,6 +27,7 @@
 #include <linux/spi/spi.h>
 #include <linux/wl12xx.h>
 #include <linux/gpio.h>
+#include <linux/regulator/consumer.h>
 
 #include "wl1251.h"
 #include "reg.h"
@@ -306,13 +307,26 @@ static int wl1251_spi_probe(struct spi_device *spi)
 
 	irq_set_irq_type(wl->irq, IRQ_TYPE_EDGE_RISING);
 
-	ret = wl1251_init_ieee80211(wl);
+	wl->vio = devm_regulator_get(&spi->dev, "vio");
+	if (IS_ERR(wl->vio)) {
+		ret = PTR_ERR(wl->vio);
+		wl1251_error("vio regulator missing: %d", ret);
+		goto out_free;
+	}
+
+	ret = regulator_enable(wl->vio);
 	if (ret)
 		goto out_free;
 
+	ret = wl1251_init_ieee80211(wl);
+	if (ret)
+		goto disable_regulator;
+
 	return 0;
 
- out_free:
+disable_regulator:
+	regulator_disable(wl->vio);
+out_free:
 	ieee80211_free_hw(hw);
 
 	return ret;
@@ -324,6 +338,7 @@ static int wl1251_spi_remove(struct spi_device *spi)
 
 	free_irq(wl->irq, wl);
 	wl1251_free_hw(wl);
+	regulator_disable(wl->vio);
 
 	return 0;
 }
diff --git a/drivers/net/wireless/ti/wl1251/wl1251.h b/drivers/net/wireless/ti/wl1251/wl1251.h
index 389fe25af1b6..16dae5269175 100644
--- a/drivers/net/wireless/ti/wl1251/wl1251.h
+++ b/drivers/net/wireless/ti/wl1251/wl1251.h
@@ -280,6 +280,8 @@ struct wl1251 {
 	int irq;
 	bool use_eeprom;
 
+	struct regulator *vio;
+
 	spinlock_t wl_lock;
 
 	enum wl1251_state state;
-- 
cgit v1.2.2


From 07bbca6f142d02b4b09d66ed3c2cde36c77057ad Mon Sep 17 00:00:00 2001
From: Sebastian Reichel <sre@debian.org>
Date: Sat, 15 Feb 2014 00:05:55 +0100
Subject: wl1251: spi: add device tree support

Add device tree support for the spi variant of wl1251.

Signed-off-by: Sebastian Reichel <sre@debian.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ti/wl1251/spi.c | 23 +++++++++++++++++------
 1 file changed, 17 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ti/wl1251/spi.c b/drivers/net/wireless/ti/wl1251/spi.c
index 0a8aacceedd1..b06d36d99362 100644
--- a/drivers/net/wireless/ti/wl1251/spi.c
+++ b/drivers/net/wireless/ti/wl1251/spi.c
@@ -27,6 +27,8 @@
 #include <linux/spi/spi.h>
 #include <linux/wl12xx.h>
 #include <linux/gpio.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
 #include <linux/regulator/consumer.h>
 
 #include "wl1251.h"
@@ -240,13 +242,13 @@ static const struct wl1251_if_operations wl1251_spi_ops = {
 
 static int wl1251_spi_probe(struct spi_device *spi)
 {
-	struct wl1251_platform_data *pdata;
+	struct wl1251_platform_data *pdata = dev_get_platdata(&spi->dev);
+	struct device_node *np = spi->dev.of_node;
 	struct ieee80211_hw *hw;
 	struct wl1251 *wl;
 	int ret;
 
-	pdata = dev_get_platdata(&spi->dev);
-	if (!pdata) {
+	if (!np && !pdata) {
 		wl1251_error("no platform data");
 		return -ENODEV;
 	}
@@ -273,7 +275,18 @@ static int wl1251_spi_probe(struct spi_device *spi)
 		goto out_free;
 	}
 
-	wl->power_gpio = pdata->power_gpio;
+	if (np) {
+		wl->use_eeprom = of_property_read_bool(np, "ti,wl1251-has-eeprom");
+		wl->power_gpio = of_get_named_gpio(np, "ti,power-gpio", 0);
+	} else if (pdata) {
+		wl->power_gpio = pdata->power_gpio;
+		wl->use_eeprom = pdata->use_eeprom;
+	}
+
+	if (wl->power_gpio == -EPROBE_DEFER) {
+		ret = -EPROBE_DEFER;
+		goto out_free;
+	}
 
 	if (gpio_is_valid(wl->power_gpio)) {
 		ret = devm_gpio_request_one(&spi->dev, wl->power_gpio,
@@ -295,8 +308,6 @@ static int wl1251_spi_probe(struct spi_device *spi)
 		goto out_free;
 	}
 
-	wl->use_eeprom = pdata->use_eeprom;
-
 	irq_set_status_flags(wl->irq, IRQ_NOAUTOEN);
 	ret = devm_request_irq(&spi->dev, wl->irq, wl1251_irq, 0,
 							DRIVER_NAME, wl);
-- 
cgit v1.2.2


From e74075a936a894b85ddf25b882ac813323aae4ef Mon Sep 17 00:00:00 2001
From: andrea merello <andrea.merello@gmail.com>
Date: Tue, 18 Feb 2014 02:10:40 +0100
Subject: rtl818x: Explicitly enable contetion window

Currently the contention window enable/disable HW flag is not
touched by the driver.

This patch explicitly set it to the correct value to make sure
contention window is enabled (AFAIK contention window must be
enabled in most (if not all) cases.

Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl8180/dev.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c
index 7980ab1f9eca..470a1e32aa4e 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c
@@ -642,6 +642,8 @@ static int rtl8180_start(struct ieee80211_hw *dev)
 	else
 		reg &= ~RTL818X_TX_CONF_HW_SEQNUM;
 
+	reg &= ~RTL818X_TX_CONF_DISCW;
+
 	/* different meaning, same value on both rtl8185 and rtl8180 */
 	reg &= ~RTL818X_TX_CONF_SAT_HWPLCP;
 
-- 
cgit v1.2.2


From 0269da281599fba2bc8bed30953d5a3ff3b083e5 Mon Sep 17 00:00:00 2001
From: andrea merello <andrea.merello@gmail.com>
Date: Tue, 18 Feb 2014 02:10:41 +0100
Subject: rtl818x: pci_iomap() should pair with pci_iounmap()

Currently the driver uses pci_iomap() but iounmap() is called in
the error path

Change to use pci_iounmap() instead.

Reported-by: Huqiu Liu <liuhq11@mails.tsinghua.edu.cn>
Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl8180/dev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c
index 470a1e32aa4e..bf59ff988952 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c
@@ -1137,7 +1137,7 @@ static int rtl8180_probe(struct pci_dev *pdev,
 	return 0;
 
  err_iounmap:
-	iounmap(priv->map);
+	pci_iounmap(pdev, priv->map);
 
  err_free_dev:
 	ieee80211_free_hw(dev);
-- 
cgit v1.2.2


From ec1da08dd721f53b97e792c749d236907c764932 Mon Sep 17 00:00:00 2001
From: andrea merello <andrea.merello@gmail.com>
Date: Sat, 22 Feb 2014 17:57:23 +0100
Subject: rtl818x: check for pci_map_single() success when initializing RX ring

During initialization a number of RX skbs are allocated and mapped
for DMA.
Currently if pci_map_single() fails, it will result in passing to the
HW a wrong DMA address (to write to!).

This patch adds check for this condition and eventually causes the
driver not to initialize, avoiding at least dangerous DMAs.

Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl8180/dev.c | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c
index bf59ff988952..0102da2f145a 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c
@@ -483,6 +483,13 @@ static int rtl8180_init_rx_ring(struct ieee80211_hw *dev)
 		mapping = (dma_addr_t *)skb->cb;
 		*mapping = pci_map_single(priv->pdev, skb_tail_pointer(skb),
 					  MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
+
+		if (pci_dma_mapping_error(priv->pdev, *mapping)) {
+			kfree_skb(skb);
+			wiphy_err(dev->wiphy, "Cannot map DMA for RX skb\n");
+			return -ENOMEM;
+		}
+
 		entry->rx_buf = cpu_to_le32(*mapping);
 		entry->flags = cpu_to_le32(RTL818X_RX_DESC_FLAG_OWN |
 					   MAX_RX_SIZE);
-- 
cgit v1.2.2


From 4da18bb4fb53537a279fe899620de9af4bf4695c Mon Sep 17 00:00:00 2001
From: andrea merello <andrea.merello@gmail.com>
Date: Tue, 18 Feb 2014 02:10:43 +0100
Subject: rtl818x: make dev_alloc_skb() null pointer check to really work

During driver initialization, some skbs are preallocated for RX.
Currenly if the allocation fails, the driver's allocation routine
exits immediatly but it will return zero (success) anyway.

In this way the driver will continue initialization with buggy
pointers around.

This patch makes the driver's allocation routine to return
an error value and to print a complaint message when skb allocation
fails.
In this way its caller will not go further, avoinding the driver to
successfully load, and preventing dereferencing buggy pointers.

An hint is thus printed about why the driver failed.

Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl8180/dev.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c
index 0102da2f145a..a9af83ef24ad 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c
@@ -476,9 +476,10 @@ static int rtl8180_init_rx_ring(struct ieee80211_hw *dev)
 		struct sk_buff *skb = dev_alloc_skb(MAX_RX_SIZE);
 		dma_addr_t *mapping;
 		entry = &priv->rx_ring[i];
-		if (!skb)
-			return 0;
-
+		if (!skb) {
+			wiphy_err(dev->wiphy, "Cannot allocate RX skb\n");
+			return -ENOMEM;
+		}
 		priv->rx_buf[i] = skb;
 		mapping = (dma_addr_t *)skb->cb;
 		*mapping = pci_map_single(priv->pdev, skb_tail_pointer(skb),
-- 
cgit v1.2.2


From 14c76150f7cc07c4662bd8e6622e5e38df985315 Mon Sep 17 00:00:00 2001
From: andrea merello <andrea.merello@gmail.com>
Date: Tue, 18 Feb 2014 02:10:44 +0100
Subject: rtl818x: add comments to explain few not obvious HW configs.

Certain HW options (TX packet retry count, CW configuration and
TX power configuration) can be specified in both the TX packet
descriptor and also into HW "global" registers.

The HW is thus configured to honour the global register or the
TX descriptor field depending by the case.

This patch adds few comments that hopefully clarify in which cases
the driver uses one method and in which cases it uses the other.

Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl8180/dev.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c
index a9af83ef24ad..1f2462e92528 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c
@@ -627,11 +627,23 @@ static int rtl8180_start(struct ieee80211_hw *dev)
 
 	if (priv->r8185) {
 		reg = rtl818x_ioread8(priv, &priv->map->CW_CONF);
+
+		/* CW is not on per-packet basis.
+		 * in rtl8185 the CW_VALUE reg is used.
+		 */
 		reg &= ~RTL818X_CW_CONF_PERPACKET_CW;
+		/* retry limit IS on per-packet basis.
+		 * the short and long retry limit in TX_CONF
+		 * reg are ignored
+		 */
 		reg |= RTL818X_CW_CONF_PERPACKET_RETRY;
 		rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg);
 
 		reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL);
+		/* TX antenna and TX gain are not on per-packet basis.
+		 * TX Antenna is selected by ANTSEL reg (RX in BB regs).
+		 * TX gain is selected with CCK_TX_AGC and OFDM_TX_AGC regs
+		 */
 		reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN;
 		reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL;
 		reg |=  RTL818X_TX_AGC_CTL_FEEDBACK_ANT;
-- 
cgit v1.2.2


From e0febf14888b450225405d05beb4ae1c9e131594 Mon Sep 17 00:00:00 2001
From: "Zhao, Gang" <gamerh2o@gmail.com>
Date: Tue, 18 Feb 2014 21:35:57 +0800
Subject: airo: replace function ieee80211_{dsss_chan_to_freq,
 freq_to_dsss_chan}

Replace ieee80211_{dsss_chan_to_freq, freq_to_dsss_chan} with more
generic ieee80211_{channel_to_frequency, frequency_to_channel}.

Include <net/cfg80211.h> for the defination of IEEE80211_BAND_2GHZ.
Because <net/cfg80211.h> includes <linux/ieee80211.h>, so we can
replace <linux/ieee80211.h> with <net/cfg80211.h>.

This change is a preparation for the removal of function
ieee80211_{dsss_chan_to_freq, freq_to_dsss_chan}.

Signed-off-by: Zhao, Gang <gamerh2o@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/airo.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index 79c4a7692d50..64747d457bb3 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -49,7 +49,7 @@
 #include <linux/kthread.h>
 #include <linux/freezer.h>
 
-#include <linux/ieee80211.h>
+#include <net/cfg80211.h>
 #include <net/iw_handler.h>
 
 #include "airo.h"
@@ -5797,7 +5797,7 @@ static int airo_set_freq(struct net_device *dev,
 
 		/* Hack to fall through... */
 		fwrq->e = 0;
-		fwrq->m = ieee80211_freq_to_dsss_chan(f);
+		fwrq->m = ieee80211_frequency_to_channel(f);
 	}
 	/* Setting by channel number */
 	if((fwrq->m > 1000) || (fwrq->e > 0))
@@ -5841,7 +5841,8 @@ static int airo_get_freq(struct net_device *dev,
 
 	ch = le16_to_cpu(status_rid.channel);
 	if((ch > 0) && (ch < 15)) {
-		fwrq->m = ieee80211_dsss_chan_to_freq(ch) * 100000;
+		fwrq->m = 100000 *
+			ieee80211_channel_to_frequency(ch, IEEE80211_BAND_2GHZ);
 		fwrq->e = 1;
 	} else {
 		fwrq->m = ch;
@@ -6898,7 +6899,8 @@ static int airo_get_range(struct net_device *dev,
 	k = 0;
 	for(i = 0; i < 14; i++) {
 		range->freq[k].i = i + 1; /* List index */
-		range->freq[k].m = ieee80211_dsss_chan_to_freq(i + 1) * 100000;
+		range->freq[k].m = 100000 *
+		     ieee80211_channel_to_frequency(i + 1, IEEE80211_BAND_2GHZ);
 		range->freq[k++].e = 1;	/* Values in MHz -> * 10^5 * 10 */
 	}
 	range->num_frequency = k;
@@ -7297,7 +7299,8 @@ static inline char *airo_translate_scan(struct net_device *dev,
 	/* Add frequency */
 	iwe.cmd = SIOCGIWFREQ;
 	iwe.u.freq.m = le16_to_cpu(bss->dsChannel);
-	iwe.u.freq.m = ieee80211_dsss_chan_to_freq(iwe.u.freq.m) * 100000;
+	iwe.u.freq.m = 100000 *
+	      ieee80211_channel_to_frequency(iwe.u.freq.m, IEEE80211_BAND_2GHZ);
 	iwe.u.freq.e = 1;
 	current_ev = iwe_stream_add_event(info, current_ev, end_buf,
 					  &iwe, IW_EV_FREQ_LEN);
-- 
cgit v1.2.2


From 61e5487b34d3831fcc0db1308643f4a5dc465ae1 Mon Sep 17 00:00:00 2001
From: "Zhao, Gang" <gamerh2o@gmail.com>
Date: Tue, 18 Feb 2014 21:35:58 +0800
Subject: atmel: replace function ieee80211_{dsss_chan_to_freq,
 freq_to_dsss_chan}

Replace ieee80211_{dsss_chan_to_freq, freq_to_dsss_chan} with more
generic ieee80211_{channel_to_frequency, frequency_to_channel}.

Include <net/cfg80211.h> for the defination of IEEE80211_BAND_2GHZ.
Because <net/cfg80211.h> includes <linux/ieee80211.h>, so we can
replace <linux/ieee80211.h> with <net/cfg80211.h>.

This change is a preparation for the removal of function
ieee80211_{dsss_chan_to_freq, freq_to_dsss_chan}.

Cc: Simon Kelley <simon@thekelleys.org.uk>
Signed-off-by: Zhao, Gang <gamerh2o@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/atmel.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c
index bf93ea859f2d..1fe41af81a59 100644
--- a/drivers/net/wireless/atmel.c
+++ b/drivers/net/wireless/atmel.c
@@ -67,7 +67,7 @@
 #include <linux/moduleparam.h>
 #include <linux/firmware.h>
 #include <linux/jiffies.h>
-#include <linux/ieee80211.h>
+#include <net/cfg80211.h>
 #include "atmel.h"
 
 #define DRIVER_MAJOR 0
@@ -2273,7 +2273,7 @@ static int atmel_set_freq(struct net_device *dev,
 
 		/* Hack to fall through... */
 		fwrq->e = 0;
-		fwrq->m = ieee80211_freq_to_dsss_chan(f);
+		fwrq->m = ieee80211_frequency_to_channel(f);
 	}
 	/* Setting by channel number */
 	if ((fwrq->m > 1000) || (fwrq->e > 0))
@@ -2434,8 +2434,8 @@ static int atmel_get_range(struct net_device *dev,
 			range->freq[k].i = i; /* List index */
 
 			/* Values in MHz -> * 10^5 * 10 */
-			range->freq[k].m = (ieee80211_dsss_chan_to_freq(i) *
-					    100000);
+			range->freq[k].m = 100000 *
+			 ieee80211_channel_to_frequency(i, IEEE80211_BAND_2GHZ);
 			range->freq[k++].e = 1;
 		}
 		range->num_frequency = k;
-- 
cgit v1.2.2


From de5356e6aad65405952f7057802c576c1268fb4b Mon Sep 17 00:00:00 2001
From: "Zhao, Gang" <gamerh2o@gmail.com>
Date: Tue, 18 Feb 2014 21:35:59 +0800
Subject: wl3501_cs: replace function ieee80211_{dsss_chan_to_freq,
 freq_to_dsss_chan}

Replace ieee80211_{dsss_chan_to_freq, freq_to_dsss_chan} with more
generic ieee80211_{channel_to_frequency, frequency_to_channel}.

Include <net/cfg80211.h> for the defination of IEEE80211_BAND_2GHZ.
Because <net/cfg80211.h> includes <linux/ieee80211.h>, so we can
replace <linux/ieee80211.h> with <net/cfg80211.h>.

This change is a preparation for the removal of function
ieee80211_{dsss_chan_to_freq, freq_to_dsss_chan}.

Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Zhao, Gang <gamerh2o@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl3501_cs.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index 66bca677c4fa..d5c371d77ddf 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -42,7 +42,7 @@
 #include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/wireless.h>
-#include <linux/ieee80211.h>
+#include <net/cfg80211.h>
 
 #include <net/iw_handler.h>
 
@@ -1453,7 +1453,8 @@ static int wl3501_get_freq(struct net_device *dev, struct iw_request_info *info,
 {
 	struct wl3501_card *this = netdev_priv(dev);
 
-	wrqu->freq.m = ieee80211_dsss_chan_to_freq(this->chan) * 100000;
+	wrqu->freq.m = 100000 *
+		ieee80211_channel_to_frequency(this->chan, IEEE80211_BAND_2GHZ);
 	wrqu->freq.e = 1;
 	return 0;
 }
-- 
cgit v1.2.2


From 3a11af8aadc5a7bf9b4cdec6424869b1017b452e Mon Sep 17 00:00:00 2001
From: "Zhao, Gang" <gamerh2o@gmail.com>
Date: Tue, 18 Feb 2014 21:36:00 +0800
Subject: rndis_wlan: replace function ieee80211_{dsss_chan_to_freq,
 freq_to_dsss_chan}

Replace ieee80211_{dsss_chan_to_freq, freq_to_dsss_chan} with more
generic ieee80211_{channel_to_frequency, frequency_to_channel}.

File <net/cfg80211.h> has already been included. It's safe to use
IEEE80211_BAND_2GHZ here.

This change is a preparation for the removal of function
ieee80211_{dsss_chan_to_freq, freq_to_dsss_chan}.

Cc: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: Zhao, Gang <gamerh2o@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rndis_wlan.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c
index 2e89a865a67d..39d22a154341 100644
--- a/drivers/net/wireless/rndis_wlan.c
+++ b/drivers/net/wireless/rndis_wlan.c
@@ -1290,7 +1290,8 @@ static int set_channel(struct usbnet *usbdev, int channel)
 	if (is_associated(usbdev))
 		return 0;
 
-	dsconfig = ieee80211_dsss_chan_to_freq(channel) * 1000;
+	dsconfig = 1000 *
+		ieee80211_channel_to_frequency(channel, IEEE80211_BAND_2GHZ);
 
 	len = sizeof(config);
 	ret = rndis_query_oid(usbdev,
-- 
cgit v1.2.2


From 3d54b9052c08a473f56cbed6a0bb4c900c948474 Mon Sep 17 00:00:00 2001
From: "Zhao, Gang" <gamerh2o@gmail.com>
Date: Tue, 18 Feb 2014 21:36:01 +0800
Subject: zd1201: replace function ieee80211_{dsss_chan_to_freq,
 freq_to_dsss_chan}

Replace ieee80211_{dsss_chan_to_freq, freq_to_dsss_chan} with more
generic ieee80211_{channel_to_frequency, frequency_to_channel}.

Function ieee80211_frequency_to_channel() will return 0 if frequency
is not correctly provided, so no need to set channel to 0 explicitly.

Include <net/cfg80211.h> for the defination of IEEE80211_BAND_2GHZ.
Because <net/cfg80211.h> includes <linux/ieee80211.h>, so we can
replace <linux/ieee80211.h> with <net/cfg80211.h>.

This change is a preparation for the removal of function
ieee80211_{dsss_chan_to_freq, freq_to_dsss_chan}.

Signed-off-by: Zhao, Gang <gamerh2o@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/zd1201.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/zd1201.c b/drivers/net/wireless/zd1201.c
index d39c4178c33a..6f5c793a7855 100644
--- a/drivers/net/wireless/zd1201.c
+++ b/drivers/net/wireless/zd1201.c
@@ -18,7 +18,7 @@
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 #include <linux/wireless.h>
-#include <linux/ieee80211.h>
+#include <net/cfg80211.h>
 #include <net/iw_handler.h>
 #include <linux/string.h>
 #include <linux/if_arp.h>
@@ -914,11 +914,8 @@ static int zd1201_set_freq(struct net_device *dev,
 
 	if (freq->e == 0)
 		channel = freq->m;
-	else {
-		channel = ieee80211_freq_to_dsss_chan(freq->m);
-		if (channel < 0)
-			channel = 0;
-	}
+	else
+		channel = ieee80211_frequency_to_channel(freq->m);
 
 	err = zd1201_setconfig16(zd, ZD1201_RID_CNFOWNCHANNEL, channel);
 	if (err)
-- 
cgit v1.2.2


From 13c1ac5703d5507da9422377819d5d1e4e550173 Mon Sep 17 00:00:00 2001
From: "Zhao, Gang" <gamerh2o@gmail.com>
Date: Wed, 19 Feb 2014 16:58:43 +0800
Subject: orinoco: replace function ieee80211_{dsss_chan_to_freq,
 freq_to_dsss_chan}

Replace ieee80211_{dsss_chan_to_freq, freq_to_dsss_chan} with more
generic ieee80211_{channel_to_frequency, frequency_to_channel}.

File <net/cfg80211.h> has already been included. It's safe to use
IEEE80211_BAND_2GHZ here.

This change is a preparation for the removal of function
ieee80211_{dsss_chan_to_freq, freq_to_dsss_chan}.

Signed-off-by: Zhao, Gang <gamerh2o@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/orinoco/cfg.c  | 5 +++--
 drivers/net/wireless/orinoco/hw.c   | 2 +-
 drivers/net/wireless/orinoco/scan.c | 5 +++--
 drivers/net/wireless/orinoco/wext.c | 2 +-
 4 files changed, 8 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/orinoco/cfg.c b/drivers/net/wireless/orinoco/cfg.c
index d01edd2c50c5..a9e94b6db5b7 100644
--- a/drivers/net/wireless/orinoco/cfg.c
+++ b/drivers/net/wireless/orinoco/cfg.c
@@ -59,7 +59,8 @@ int orinoco_wiphy_register(struct wiphy *wiphy)
 	for (i = 0; i < NUM_CHANNELS; i++) {
 		if (priv->channel_mask & (1 << i)) {
 			priv->channels[i].center_freq =
-				ieee80211_dsss_chan_to_freq(i + 1);
+				ieee80211_channel_to_frequency(i + 1,
+							   IEEE80211_BAND_2GHZ);
 			channels++;
 		}
 	}
@@ -177,7 +178,7 @@ static int orinoco_set_monitor_channel(struct wiphy *wiphy,
 	if (chandef->chan->band != IEEE80211_BAND_2GHZ)
 		return -EINVAL;
 
-	channel = ieee80211_freq_to_dsss_chan(chandef->chan->center_freq);
+	channel = ieee80211_frequency_to_channel(chandef->chan->center_freq);
 
 	if ((channel < 1) || (channel > NUM_CHANNELS) ||
 	     !(priv->channel_mask & (1 << (channel - 1))))
diff --git a/drivers/net/wireless/orinoco/hw.c b/drivers/net/wireless/orinoco/hw.c
index c09c8437c0b8..49300d04efdf 100644
--- a/drivers/net/wireless/orinoco/hw.c
+++ b/drivers/net/wireless/orinoco/hw.c
@@ -1193,7 +1193,7 @@ int orinoco_hw_get_freq(struct orinoco_private *priv)
 		goto out;
 
 	}
-	freq = ieee80211_dsss_chan_to_freq(channel);
+	freq = ieee80211_channel_to_frequency(channel, IEEE80211_BAND_2GHZ);
 
  out:
 	orinoco_unlock(priv, &flags);
diff --git a/drivers/net/wireless/orinoco/scan.c b/drivers/net/wireless/orinoco/scan.c
index e8c5714bfd11..e175b9b8561b 100644
--- a/drivers/net/wireless/orinoco/scan.c
+++ b/drivers/net/wireless/orinoco/scan.c
@@ -110,7 +110,8 @@ static void orinoco_add_hostscan_result(struct orinoco_private *priv,
 		break;
 	}
 
-	freq = ieee80211_dsss_chan_to_freq(le16_to_cpu(bss->a.channel));
+	freq = ieee80211_channel_to_frequency(
+		le16_to_cpu(bss->a.channel), IEEE80211_BAND_2GHZ);
 	channel = ieee80211_get_channel(wiphy, freq);
 	if (!channel) {
 		printk(KERN_DEBUG "Invalid channel designation %04X(%04X)",
@@ -146,7 +147,7 @@ void orinoco_add_extscan_result(struct orinoco_private *priv,
 	ie_len = len - sizeof(*bss);
 	ie = cfg80211_find_ie(WLAN_EID_DS_PARAMS, bss->data, ie_len);
 	chan = ie ? ie[2] : 0;
-	freq = ieee80211_dsss_chan_to_freq(chan);
+	freq = ieee80211_channel_to_frequency(chan, IEEE80211_BAND_2GHZ);
 	channel = ieee80211_get_channel(wiphy, freq);
 
 	timestamp = le64_to_cpu(bss->timestamp);
diff --git a/drivers/net/wireless/orinoco/wext.c b/drivers/net/wireless/orinoco/wext.c
index 3b5508f982e8..b7a867b50b94 100644
--- a/drivers/net/wireless/orinoco/wext.c
+++ b/drivers/net/wireless/orinoco/wext.c
@@ -444,7 +444,7 @@ static int orinoco_ioctl_setfreq(struct net_device *dev,
 		for (i = 0; i < (6 - frq->e); i++)
 			denom *= 10;
 
-		chan = ieee80211_freq_to_dsss_chan(frq->m / denom);
+		chan = ieee80211_frequency_to_channel(frq->m / denom);
 	}
 
 	if ((chan < 1) || (chan > NUM_CHANNELS) ||
-- 
cgit v1.2.2


From c3015313aea0f765dbe743f95087a5994db082f2 Mon Sep 17 00:00:00 2001
From: Yogesh Ashok Powar <yogeshp@marvell.com>
Date: Tue, 25 Feb 2014 17:41:58 +0530
Subject: mwl8k: Adding support to access BBP registers

Adding AP firmware command to access BBP
regs. This will be used for retrieving
different counters CCA/RX needed for ACS

Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Nishant Sarmukadam <nishants@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 42 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 4987c3f942ce..6c002f3d91cd 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -396,6 +396,7 @@ static const struct ieee80211_rate mwl8k_rates_50[] = {
 #define MWL8K_CMD_SET_HW_SPEC		0x0004
 #define MWL8K_CMD_MAC_MULTICAST_ADR	0x0010
 #define MWL8K_CMD_GET_STAT		0x0014
+#define MWL8K_CMD_BBP_REG_ACCESS	0x001a
 #define MWL8K_CMD_RADIO_CONTROL		0x001c
 #define MWL8K_CMD_RF_TX_POWER		0x001e
 #define MWL8K_CMD_TX_POWER		0x001f
@@ -2986,6 +2987,47 @@ static int mwl8k_cmd_set_pre_scan(struct ieee80211_hw *hw)
 	return rc;
 }
 
+/*
+ * CMD_BBP_REG_ACCESS.
+ */
+struct mwl8k_cmd_bbp_reg_access {
+	struct mwl8k_cmd_pkt header;
+	__le16 action;
+	__le16 offset;
+	u8 value;
+	u8 rsrv[3];
+} __packed;
+
+static int
+mwl8k_cmd_bbp_reg_access(struct ieee80211_hw *hw,
+			 u16 action,
+			 u16 offset,
+			 u8 *value)
+{
+	struct mwl8k_cmd_bbp_reg_access *cmd;
+	int rc;
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (cmd == NULL)
+		return -ENOMEM;
+
+	cmd->header.code = cpu_to_le16(MWL8K_CMD_BBP_REG_ACCESS);
+	cmd->header.length = cpu_to_le16(sizeof(*cmd));
+	cmd->action = cpu_to_le16(action);
+	cmd->offset = cpu_to_le16(offset);
+
+	rc = mwl8k_post_cmd(hw, &cmd->header);
+
+	if (!rc)
+		*value = cmd->value;
+	else
+		*value = 0;
+
+	kfree(cmd);
+
+	return rc;
+}
+
 /*
  * CMD_SET_POST_SCAN.
  */
-- 
cgit v1.2.2


From 4c924f42c9c9f60ca861a8c4a52825778e9e09a0 Mon Sep 17 00:00:00 2001
From: Yogesh Ashok Powar <yogeshp@marvell.com>
Date: Tue, 25 Feb 2014 17:42:09 +0530
Subject: mwl8k: Implement sw_scan start/stop cbs

Implement sw_scan start and stop callbacks.
Reset BBP registers for channel, RX busy and
average noise stats which clear on read.

Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Nishant Sarmukadam <nishants@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 40 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 6c002f3d91cd..61d5bea9a9d7 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -81,6 +81,9 @@ MODULE_PARM_DESC(ap_mode_default,
  */
 
 #define	MWL8K_HW_TIMER_REGISTER			0x0000a600
+#define BBU_RXRDY_CNT_REG			0x0000a860
+#define NOK_CCA_CNT_REG				0x0000a6a0
+#define BBU_AVG_NOISE_VAL			0x67
 
 #define MWL8K_A2H_EVENTS	(MWL8K_A2H_INT_DUMMY | \
 				 MWL8K_A2H_INT_CHNL_SWITCHED | \
@@ -289,6 +292,9 @@ struct mwl8k_priv {
 
 	/* bitmap of running BSSes */
 	u32 running_bsses;
+
+	/* ACS related */
+	bool sw_scan_start;
 };
 
 #define MAX_WEP_KEY_LEN         13
@@ -5448,6 +5454,38 @@ mwl8k_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 	return rc;
 }
 
+static void mwl8k_sw_scan_start(struct ieee80211_hw *hw)
+{
+	struct mwl8k_priv *priv = hw->priv;
+	u8 tmp;
+
+	if (!priv->ap_fw)
+		return;
+
+	/* clear all stats */
+	ioread32(priv->regs + BBU_RXRDY_CNT_REG);
+	ioread32(priv->regs + NOK_CCA_CNT_REG);
+	mwl8k_cmd_bbp_reg_access(priv->hw, 0, BBU_AVG_NOISE_VAL, &tmp);
+
+	priv->sw_scan_start = true;
+}
+
+static void mwl8k_sw_scan_complete(struct ieee80211_hw *hw)
+{
+	struct mwl8k_priv *priv = hw->priv;
+	u8 tmp;
+
+	if (!priv->ap_fw)
+		return;
+
+	priv->sw_scan_start = false;
+
+	/* clear all stats */
+	ioread32(priv->regs + BBU_RXRDY_CNT_REG);
+	ioread32(priv->regs + NOK_CCA_CNT_REG);
+	mwl8k_cmd_bbp_reg_access(priv->hw, 0, BBU_AVG_NOISE_VAL, &tmp);
+}
+
 static const struct ieee80211_ops mwl8k_ops = {
 	.tx			= mwl8k_tx,
 	.start			= mwl8k_start,
@@ -5466,6 +5504,8 @@ static const struct ieee80211_ops mwl8k_ops = {
 	.get_stats		= mwl8k_get_stats,
 	.get_survey		= mwl8k_get_survey,
 	.ampdu_action		= mwl8k_ampdu_action,
+	.sw_scan_start		= mwl8k_sw_scan_start,
+	.sw_scan_complete	= mwl8k_sw_scan_complete,
 };
 
 static void mwl8k_finalize_join_worker(struct work_struct *work)
-- 
cgit v1.2.2


From 031eb464fb4b7e475c4e8ca59502f017ae328704 Mon Sep 17 00:00:00 2001
From: Yogesh Ashok Powar <yogeshp@marvell.com>
Date: Tue, 25 Feb 2014 17:42:18 +0530
Subject: mwl8k: Adding support to gather survey per channel

Survey stats such as channel busy time, rx busy time
and noise are collected when sw_scan starts for every
switched new channel. This happens till sw_scan stops.

All the collected stats are shared up when get_survey()
is called.

This implements support for ACS feature from Hostapd.

Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Nishant Sarmukadam <nishants@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 115 ++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 109 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 61d5bea9a9d7..b6d83f6888fa 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -115,6 +115,8 @@ MODULE_PARM_DESC(ap_mode_default,
  */
 #define MWL8K_NUM_AMPDU_STREAMS	(TOTAL_HW_TX_QUEUES - 1)
 
+#define MWL8K_NUM_CHANS 18
+
 struct rxd_ops {
 	int rxd_size;
 	void (*rxd_init)(void *rxd, dma_addr_t next_dma_addr);
@@ -295,6 +297,9 @@ struct mwl8k_priv {
 
 	/* ACS related */
 	bool sw_scan_start;
+	struct ieee80211_channel *acs_chan;
+	unsigned long channel_time;
+	struct survey_info survey[MWL8K_NUM_CHANS];
 };
 
 #define MAX_WEP_KEY_LEN         13
@@ -3064,6 +3069,64 @@ mwl8k_cmd_set_post_scan(struct ieee80211_hw *hw, const __u8 *mac)
 	return rc;
 }
 
+static int freq_to_idx(struct mwl8k_priv *priv, int freq)
+{
+	struct ieee80211_supported_band *sband;
+	int band, ch, idx = 0;
+
+	for (band = IEEE80211_BAND_2GHZ; band < IEEE80211_NUM_BANDS; band++) {
+		sband = priv->hw->wiphy->bands[band];
+		if (!sband)
+			continue;
+
+		for (ch = 0; ch < sband->n_channels; ch++, idx++)
+			if (sband->channels[ch].center_freq == freq)
+				goto exit;
+	}
+
+exit:
+	return idx;
+}
+
+void mwl8k_update_survey(struct mwl8k_priv *priv,
+			 struct ieee80211_channel *channel)
+{
+	u32 cca_cnt, rx_rdy;
+	s8 nf = 0, idx;
+	struct survey_info *survey;
+
+	idx = freq_to_idx(priv, priv->acs_chan->center_freq);
+	if (idx >= MWL8K_NUM_CHANS) {
+		wiphy_err(priv->hw->wiphy, "Failed to update survey\n");
+		return;
+	}
+
+	survey = &priv->survey[idx];
+
+	cca_cnt = le32_to_cpu(ioread32(priv->regs + NOK_CCA_CNT_REG));
+	cca_cnt /= 1000; /* uSecs to mSecs */
+	survey->channel_time_busy = (u64) cca_cnt;
+
+	rx_rdy = le32_to_cpu(ioread32(priv->regs + BBU_RXRDY_CNT_REG));
+	rx_rdy /= 1000; /* uSecs to mSecs */
+	survey->channel_time_rx = (u64) rx_rdy;
+
+	priv->channel_time = jiffies - priv->channel_time;
+	survey->channel_time = jiffies_to_msecs(priv->channel_time);
+
+	survey->channel = channel;
+
+	mwl8k_cmd_bbp_reg_access(priv->hw, 0, BBU_AVG_NOISE_VAL, &nf);
+
+	/* Make sure sign is negative else ACS  at hostapd fails */
+	survey->noise = nf * -1;
+
+	survey->filled = SURVEY_INFO_NOISE_DBM |
+			 SURVEY_INFO_CHANNEL_TIME |
+			 SURVEY_INFO_CHANNEL_TIME_BUSY |
+			 SURVEY_INFO_CHANNEL_TIME_RX;
+}
+
 /*
  * CMD_SET_RF_CHANNEL.
  */
@@ -3081,6 +3144,7 @@ static int mwl8k_cmd_set_rf_channel(struct ieee80211_hw *hw,
 	enum nl80211_channel_type channel_type =
 		cfg80211_get_chandef_type(&conf->chandef);
 	struct mwl8k_cmd_set_rf_channel *cmd;
+	struct mwl8k_priv *priv = hw->priv;
 	int rc;
 
 	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
@@ -3097,13 +3161,29 @@ static int mwl8k_cmd_set_rf_channel(struct ieee80211_hw *hw,
 	else if (channel->band == IEEE80211_BAND_5GHZ)
 		cmd->channel_flags |= cpu_to_le32(0x00000004);
 
-	if (channel_type == NL80211_CHAN_NO_HT ||
-	    channel_type == NL80211_CHAN_HT20)
+	if (!priv->sw_scan_start) {
+		if (channel_type == NL80211_CHAN_NO_HT ||
+		    channel_type == NL80211_CHAN_HT20)
+			cmd->channel_flags |= cpu_to_le32(0x00000080);
+		else if (channel_type == NL80211_CHAN_HT40MINUS)
+			cmd->channel_flags |= cpu_to_le32(0x000001900);
+		else if (channel_type == NL80211_CHAN_HT40PLUS)
+			cmd->channel_flags |= cpu_to_le32(0x000000900);
+	} else {
 		cmd->channel_flags |= cpu_to_le32(0x00000080);
-	else if (channel_type == NL80211_CHAN_HT40MINUS)
-		cmd->channel_flags |= cpu_to_le32(0x000001900);
-	else if (channel_type == NL80211_CHAN_HT40PLUS)
-		cmd->channel_flags |= cpu_to_le32(0x000000900);
+	}
+
+	if (priv->sw_scan_start) {
+		/* Store current channel stats
+		 * before switching to newer one.
+		 * This will be processed only for AP fw.
+		 */
+		if (priv->channel_time != 0)
+			mwl8k_update_survey(priv, priv->acs_chan);
+
+		priv->channel_time = jiffies;
+		priv->acs_chan =  channel;
+	}
 
 	rc = mwl8k_post_cmd(hw, &cmd->header);
 	kfree(cmd);
@@ -5311,6 +5391,27 @@ static int mwl8k_get_survey(struct ieee80211_hw *hw, int idx,
 {
 	struct mwl8k_priv *priv = hw->priv;
 	struct ieee80211_conf *conf = &hw->conf;
+	struct ieee80211_supported_band *sband;
+
+	if (priv->ap_fw) {
+		sband = hw->wiphy->bands[IEEE80211_BAND_2GHZ];
+
+		if (sband && idx >= sband->n_channels) {
+			idx -= sband->n_channels;
+			sband = NULL;
+		}
+
+		if (!sband)
+			sband = hw->wiphy->bands[IEEE80211_BAND_5GHZ];
+
+		if (!sband || idx >= sband->n_channels)
+			return -ENOENT;
+
+		memcpy(survey, &priv->survey[idx], sizeof(*survey));
+		survey->channel = &sband->channels[idx];
+
+		return 0;
+	}
 
 	if (idx != 0)
 		return -ENOENT;
@@ -5463,6 +5564,7 @@ static void mwl8k_sw_scan_start(struct ieee80211_hw *hw)
 		return;
 
 	/* clear all stats */
+	priv->channel_time = 0;
 	ioread32(priv->regs + BBU_RXRDY_CNT_REG);
 	ioread32(priv->regs + NOK_CCA_CNT_REG);
 	mwl8k_cmd_bbp_reg_access(priv->hw, 0, BBU_AVG_NOISE_VAL, &tmp);
@@ -5481,6 +5583,7 @@ static void mwl8k_sw_scan_complete(struct ieee80211_hw *hw)
 	priv->sw_scan_start = false;
 
 	/* clear all stats */
+	priv->channel_time = 0;
 	ioread32(priv->regs + BBU_RXRDY_CNT_REG);
 	ioread32(priv->regs + NOK_CCA_CNT_REG);
 	mwl8k_cmd_bbp_reg_access(priv->hw, 0, BBU_AVG_NOISE_VAL, &tmp);
-- 
cgit v1.2.2


From 13f71050c10df77c1b9f2808c410d68dfcdb26b4 Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@rempel-privat.de>
Date: Tue, 25 Feb 2014 14:48:50 +0100
Subject: ath9k: move ath9k_init_channels_rates to common-init

and rename it to ath9k_cmn_init_channels_rates.
sbands are move to ath_common as well.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath.h               |   1 +
 drivers/net/wireless/ath/ath9k/Makefile      |   3 +-
 drivers/net/wireless/ath/ath9k/ath9k.h       |   1 -
 drivers/net/wireless/ath/ath9k/beacon.c      |   2 +-
 drivers/net/wireless/ath/ath9k/common-init.c | 170 ++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath9k/common-init.h |  17 +++
 drivers/net/wireless/ath/ath9k/common.h      |   2 +
 drivers/net/wireless/ath/ath9k/init.c        | 172 ++-------------------------
 drivers/net/wireless/ath/ath9k/xmit.c        |   3 +-
 9 files changed, 208 insertions(+), 163 deletions(-)
 create mode 100644 drivers/net/wireless/ath/ath9k/common-init.c
 create mode 100644 drivers/net/wireless/ath/ath9k/common-init.h

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath.h b/drivers/net/wireless/ath/ath.h
index 56d559939cfc..d239acc26125 100644
--- a/drivers/net/wireless/ath/ath.h
+++ b/drivers/net/wireless/ath/ath.h
@@ -163,6 +163,7 @@ struct ath_common {
 	bool bt_ant_diversity;
 
 	int last_rssi;
+	struct ieee80211_supported_band sbands[IEEE80211_NUM_BANDS];
 };
 
 struct sk_buff *ath_rxbuf_alloc(struct ath_common *common,
diff --git a/drivers/net/wireless/ath/ath9k/Makefile b/drivers/net/wireless/ath/ath9k/Makefile
index 747975e1860a..b58fe99ef745 100644
--- a/drivers/net/wireless/ath/ath9k/Makefile
+++ b/drivers/net/wireless/ath/ath9k/Makefile
@@ -51,7 +51,8 @@ ath9k_hw-$(CONFIG_ATH9K_BTCOEX_SUPPORT) += btcoex.o \
 obj-$(CONFIG_ATH9K_HW) += ath9k_hw.o
 
 obj-$(CONFIG_ATH9K_COMMON) += ath9k_common.o
-ath9k_common-y:=	common.o
+ath9k_common-y:=	common.o \
+			common-init.o
 
 ath9k_htc-y +=	htc_hst.o \
 		hif_usb.o \
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 21d13bc99c5a..e703ddad7ecf 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -753,7 +753,6 @@ struct ath_softc {
 	struct ath_rx rx;
 	struct ath_tx tx;
 	struct ath_beacon beacon;
-	struct ieee80211_supported_band sbands[IEEE80211_NUM_BANDS];
 
 #ifdef CONFIG_MAC80211_LEDS
 	bool led_registered;
diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c
index 32d00e8cfd0c..6569528753af 100644
--- a/drivers/net/wireless/ath/ath9k/beacon.c
+++ b/drivers/net/wireless/ath/ath9k/beacon.c
@@ -80,7 +80,7 @@ static void ath9k_beacon_setup(struct ath_softc *sc, struct ieee80211_vif *vif,
 	u8 chainmask = ah->txchainmask;
 	u8 rate = 0;
 
-	sband = &sc->sbands[common->hw->conf.chandef.chan->band];
+	sband = &common->sbands[common->hw->conf.chandef.chan->band];
 	rate = sband->bitrates[rateidx].hw_value;
 	if (vif->bss_conf.use_short_preamble)
 		rate |= sband->bitrates[rateidx].hw_value_short;
diff --git a/drivers/net/wireless/ath/ath9k/common-init.c b/drivers/net/wireless/ath/ath9k/common-init.c
new file mode 100644
index 000000000000..1fa30c3b7d53
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/common-init.c
@@ -0,0 +1,170 @@
+/*
+ * Copyright (c) 2008-2011 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/* We use the hw_value as an index into our private channel structure */
+
+#include "common.h"
+
+#define CHAN2G(_freq, _idx)  { \
+	.band = IEEE80211_BAND_2GHZ, \
+	.center_freq = (_freq), \
+	.hw_value = (_idx), \
+	.max_power = 20, \
+}
+
+#define CHAN5G(_freq, _idx) { \
+	.band = IEEE80211_BAND_5GHZ, \
+	.center_freq = (_freq), \
+	.hw_value = (_idx), \
+	.max_power = 20, \
+}
+
+/* Some 2 GHz radios are actually tunable on 2312-2732
+ * on 5 MHz steps, we support the channels which we know
+ * we have calibration data for all cards though to make
+ * this static */
+static const struct ieee80211_channel ath9k_2ghz_chantable[] = {
+	CHAN2G(2412, 0), /* Channel 1 */
+	CHAN2G(2417, 1), /* Channel 2 */
+	CHAN2G(2422, 2), /* Channel 3 */
+	CHAN2G(2427, 3), /* Channel 4 */
+	CHAN2G(2432, 4), /* Channel 5 */
+	CHAN2G(2437, 5), /* Channel 6 */
+	CHAN2G(2442, 6), /* Channel 7 */
+	CHAN2G(2447, 7), /* Channel 8 */
+	CHAN2G(2452, 8), /* Channel 9 */
+	CHAN2G(2457, 9), /* Channel 10 */
+	CHAN2G(2462, 10), /* Channel 11 */
+	CHAN2G(2467, 11), /* Channel 12 */
+	CHAN2G(2472, 12), /* Channel 13 */
+	CHAN2G(2484, 13), /* Channel 14 */
+};
+
+/* Some 5 GHz radios are actually tunable on XXXX-YYYY
+ * on 5 MHz steps, we support the channels which we know
+ * we have calibration data for all cards though to make
+ * this static */
+static const struct ieee80211_channel ath9k_5ghz_chantable[] = {
+	/* _We_ call this UNII 1 */
+	CHAN5G(5180, 14), /* Channel 36 */
+	CHAN5G(5200, 15), /* Channel 40 */
+	CHAN5G(5220, 16), /* Channel 44 */
+	CHAN5G(5240, 17), /* Channel 48 */
+	/* _We_ call this UNII 2 */
+	CHAN5G(5260, 18), /* Channel 52 */
+	CHAN5G(5280, 19), /* Channel 56 */
+	CHAN5G(5300, 20), /* Channel 60 */
+	CHAN5G(5320, 21), /* Channel 64 */
+	/* _We_ call this "Middle band" */
+	CHAN5G(5500, 22), /* Channel 100 */
+	CHAN5G(5520, 23), /* Channel 104 */
+	CHAN5G(5540, 24), /* Channel 108 */
+	CHAN5G(5560, 25), /* Channel 112 */
+	CHAN5G(5580, 26), /* Channel 116 */
+	CHAN5G(5600, 27), /* Channel 120 */
+	CHAN5G(5620, 28), /* Channel 124 */
+	CHAN5G(5640, 29), /* Channel 128 */
+	CHAN5G(5660, 30), /* Channel 132 */
+	CHAN5G(5680, 31), /* Channel 136 */
+	CHAN5G(5700, 32), /* Channel 140 */
+	/* _We_ call this UNII 3 */
+	CHAN5G(5745, 33), /* Channel 149 */
+	CHAN5G(5765, 34), /* Channel 153 */
+	CHAN5G(5785, 35), /* Channel 157 */
+	CHAN5G(5805, 36), /* Channel 161 */
+	CHAN5G(5825, 37), /* Channel 165 */
+};
+
+/* Atheros hardware rate code addition for short premble */
+#define SHPCHECK(__hw_rate, __flags) \
+	((__flags & IEEE80211_RATE_SHORT_PREAMBLE) ? (__hw_rate | 0x04 ) : 0)
+
+#define RATE(_bitrate, _hw_rate, _flags) {              \
+	.bitrate        = (_bitrate),                   \
+	.flags          = (_flags),                     \
+	.hw_value       = (_hw_rate),                   \
+	.hw_value_short = (SHPCHECK(_hw_rate, _flags))  \
+}
+
+static struct ieee80211_rate ath9k_legacy_rates[] = {
+	RATE(10, 0x1b, 0),
+	RATE(20, 0x1a, IEEE80211_RATE_SHORT_PREAMBLE),
+	RATE(55, 0x19, IEEE80211_RATE_SHORT_PREAMBLE),
+	RATE(110, 0x18, IEEE80211_RATE_SHORT_PREAMBLE),
+	RATE(60, 0x0b, (IEEE80211_RATE_SUPPORTS_5MHZ |
+			IEEE80211_RATE_SUPPORTS_10MHZ)),
+	RATE(90, 0x0f, (IEEE80211_RATE_SUPPORTS_5MHZ |
+			IEEE80211_RATE_SUPPORTS_10MHZ)),
+	RATE(120, 0x0a, (IEEE80211_RATE_SUPPORTS_5MHZ |
+			 IEEE80211_RATE_SUPPORTS_10MHZ)),
+	RATE(180, 0x0e, (IEEE80211_RATE_SUPPORTS_5MHZ |
+			 IEEE80211_RATE_SUPPORTS_10MHZ)),
+	RATE(240, 0x09, (IEEE80211_RATE_SUPPORTS_5MHZ |
+			 IEEE80211_RATE_SUPPORTS_10MHZ)),
+	RATE(360, 0x0d, (IEEE80211_RATE_SUPPORTS_5MHZ |
+			 IEEE80211_RATE_SUPPORTS_10MHZ)),
+	RATE(480, 0x08, (IEEE80211_RATE_SUPPORTS_5MHZ |
+			 IEEE80211_RATE_SUPPORTS_10MHZ)),
+	RATE(540, 0x0c, (IEEE80211_RATE_SUPPORTS_5MHZ |
+			 IEEE80211_RATE_SUPPORTS_10MHZ)),
+};
+
+int ath9k_cmn_init_channels_rates(struct ath_common *common)
+{
+	struct ath_hw *ah = (struct ath_hw *)common->ah;
+	void *channels;
+
+	BUILD_BUG_ON(ARRAY_SIZE(ath9k_2ghz_chantable) +
+		     ARRAY_SIZE(ath9k_5ghz_chantable) !=
+		     ATH9K_NUM_CHANNELS);
+
+	if (ah->caps.hw_caps & ATH9K_HW_CAP_2GHZ) {
+		channels = devm_kzalloc(ah->dev,
+			sizeof(ath9k_2ghz_chantable), GFP_KERNEL);
+		if (!channels)
+		    return -ENOMEM;
+
+		memcpy(channels, ath9k_2ghz_chantable,
+		       sizeof(ath9k_2ghz_chantable));
+		common->sbands[IEEE80211_BAND_2GHZ].channels = channels;
+		common->sbands[IEEE80211_BAND_2GHZ].band = IEEE80211_BAND_2GHZ;
+		common->sbands[IEEE80211_BAND_2GHZ].n_channels =
+			ARRAY_SIZE(ath9k_2ghz_chantable);
+		common->sbands[IEEE80211_BAND_2GHZ].bitrates = ath9k_legacy_rates;
+		common->sbands[IEEE80211_BAND_2GHZ].n_bitrates =
+			ARRAY_SIZE(ath9k_legacy_rates);
+	}
+
+	if (ah->caps.hw_caps & ATH9K_HW_CAP_5GHZ) {
+		channels = devm_kzalloc(ah->dev,
+			sizeof(ath9k_5ghz_chantable), GFP_KERNEL);
+		if (!channels)
+			return -ENOMEM;
+
+		memcpy(channels, ath9k_5ghz_chantable,
+		       sizeof(ath9k_5ghz_chantable));
+		common->sbands[IEEE80211_BAND_5GHZ].channels = channels;
+		common->sbands[IEEE80211_BAND_5GHZ].band = IEEE80211_BAND_5GHZ;
+		common->sbands[IEEE80211_BAND_5GHZ].n_channels =
+			ARRAY_SIZE(ath9k_5ghz_chantable);
+		common->sbands[IEEE80211_BAND_5GHZ].bitrates =
+			ath9k_legacy_rates + 4;
+		common->sbands[IEEE80211_BAND_5GHZ].n_bitrates =
+			ARRAY_SIZE(ath9k_legacy_rates) - 4;
+	}
+	return 0;
+}
+EXPORT_SYMBOL(ath9k_cmn_init_channels_rates);
diff --git a/drivers/net/wireless/ath/ath9k/common-init.h b/drivers/net/wireless/ath/ath9k/common-init.h
new file mode 100644
index 000000000000..8fc9049ad8b0
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/common-init.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright (c) 2009-2011 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+int ath9k_cmn_init_channels_rates(struct ath_common *common);
diff --git a/drivers/net/wireless/ath/ath9k/common.h b/drivers/net/wireless/ath/ath9k/common.h
index 38b5609a4018..4c449e35bd65 100644
--- a/drivers/net/wireless/ath/ath9k/common.h
+++ b/drivers/net/wireless/ath/ath9k/common.h
@@ -21,6 +21,8 @@
 #include "hw.h"
 #include "hw-ops.h"
 
+#include "common-init.h"
+
 /* Common header for Atheros 802.11n base driver cores */
 
 #define WME_BA_BMP_SIZE         64
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 4856a1739ade..a6232cf0e998 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -62,111 +62,6 @@ module_param_named(ps_enable, ath9k_ps_enable, int, 0444);
 MODULE_PARM_DESC(ps_enable, "Enable WLAN PowerSave");
 
 bool is_ath9k_unloaded;
-/* We use the hw_value as an index into our private channel structure */
-
-#define CHAN2G(_freq, _idx)  { \
-	.band = IEEE80211_BAND_2GHZ, \
-	.center_freq = (_freq), \
-	.hw_value = (_idx), \
-	.max_power = 20, \
-}
-
-#define CHAN5G(_freq, _idx) { \
-	.band = IEEE80211_BAND_5GHZ, \
-	.center_freq = (_freq), \
-	.hw_value = (_idx), \
-	.max_power = 20, \
-}
-
-/* Some 2 GHz radios are actually tunable on 2312-2732
- * on 5 MHz steps, we support the channels which we know
- * we have calibration data for all cards though to make
- * this static */
-static const struct ieee80211_channel ath9k_2ghz_chantable[] = {
-	CHAN2G(2412, 0), /* Channel 1 */
-	CHAN2G(2417, 1), /* Channel 2 */
-	CHAN2G(2422, 2), /* Channel 3 */
-	CHAN2G(2427, 3), /* Channel 4 */
-	CHAN2G(2432, 4), /* Channel 5 */
-	CHAN2G(2437, 5), /* Channel 6 */
-	CHAN2G(2442, 6), /* Channel 7 */
-	CHAN2G(2447, 7), /* Channel 8 */
-	CHAN2G(2452, 8), /* Channel 9 */
-	CHAN2G(2457, 9), /* Channel 10 */
-	CHAN2G(2462, 10), /* Channel 11 */
-	CHAN2G(2467, 11), /* Channel 12 */
-	CHAN2G(2472, 12), /* Channel 13 */
-	CHAN2G(2484, 13), /* Channel 14 */
-};
-
-/* Some 5 GHz radios are actually tunable on XXXX-YYYY
- * on 5 MHz steps, we support the channels which we know
- * we have calibration data for all cards though to make
- * this static */
-static const struct ieee80211_channel ath9k_5ghz_chantable[] = {
-	/* _We_ call this UNII 1 */
-	CHAN5G(5180, 14), /* Channel 36 */
-	CHAN5G(5200, 15), /* Channel 40 */
-	CHAN5G(5220, 16), /* Channel 44 */
-	CHAN5G(5240, 17), /* Channel 48 */
-	/* _We_ call this UNII 2 */
-	CHAN5G(5260, 18), /* Channel 52 */
-	CHAN5G(5280, 19), /* Channel 56 */
-	CHAN5G(5300, 20), /* Channel 60 */
-	CHAN5G(5320, 21), /* Channel 64 */
-	/* _We_ call this "Middle band" */
-	CHAN5G(5500, 22), /* Channel 100 */
-	CHAN5G(5520, 23), /* Channel 104 */
-	CHAN5G(5540, 24), /* Channel 108 */
-	CHAN5G(5560, 25), /* Channel 112 */
-	CHAN5G(5580, 26), /* Channel 116 */
-	CHAN5G(5600, 27), /* Channel 120 */
-	CHAN5G(5620, 28), /* Channel 124 */
-	CHAN5G(5640, 29), /* Channel 128 */
-	CHAN5G(5660, 30), /* Channel 132 */
-	CHAN5G(5680, 31), /* Channel 136 */
-	CHAN5G(5700, 32), /* Channel 140 */
-	/* _We_ call this UNII 3 */
-	CHAN5G(5745, 33), /* Channel 149 */
-	CHAN5G(5765, 34), /* Channel 153 */
-	CHAN5G(5785, 35), /* Channel 157 */
-	CHAN5G(5805, 36), /* Channel 161 */
-	CHAN5G(5825, 37), /* Channel 165 */
-};
-
-/* Atheros hardware rate code addition for short premble */
-#define SHPCHECK(__hw_rate, __flags) \
-	((__flags & IEEE80211_RATE_SHORT_PREAMBLE) ? (__hw_rate | 0x04 ) : 0)
-
-#define RATE(_bitrate, _hw_rate, _flags) {              \
-	.bitrate        = (_bitrate),                   \
-	.flags          = (_flags),                     \
-	.hw_value       = (_hw_rate),                   \
-	.hw_value_short = (SHPCHECK(_hw_rate, _flags))  \
-}
-
-static struct ieee80211_rate ath9k_legacy_rates[] = {
-	RATE(10, 0x1b, 0),
-	RATE(20, 0x1a, IEEE80211_RATE_SHORT_PREAMBLE),
-	RATE(55, 0x19, IEEE80211_RATE_SHORT_PREAMBLE),
-	RATE(110, 0x18, IEEE80211_RATE_SHORT_PREAMBLE),
-	RATE(60, 0x0b, (IEEE80211_RATE_SUPPORTS_5MHZ |
-			IEEE80211_RATE_SUPPORTS_10MHZ)),
-	RATE(90, 0x0f, (IEEE80211_RATE_SUPPORTS_5MHZ |
-			IEEE80211_RATE_SUPPORTS_10MHZ)),
-	RATE(120, 0x0a, (IEEE80211_RATE_SUPPORTS_5MHZ |
-			 IEEE80211_RATE_SUPPORTS_10MHZ)),
-	RATE(180, 0x0e, (IEEE80211_RATE_SUPPORTS_5MHZ |
-			 IEEE80211_RATE_SUPPORTS_10MHZ)),
-	RATE(240, 0x09, (IEEE80211_RATE_SUPPORTS_5MHZ |
-			 IEEE80211_RATE_SUPPORTS_10MHZ)),
-	RATE(360, 0x0d, (IEEE80211_RATE_SUPPORTS_5MHZ |
-			 IEEE80211_RATE_SUPPORTS_10MHZ)),
-	RATE(480, 0x08, (IEEE80211_RATE_SUPPORTS_5MHZ |
-			 IEEE80211_RATE_SUPPORTS_10MHZ)),
-	RATE(540, 0x0c, (IEEE80211_RATE_SUPPORTS_5MHZ |
-			 IEEE80211_RATE_SUPPORTS_10MHZ)),
-};
 
 #ifdef CONFIG_MAC80211_LEDS
 static const struct ieee80211_tpt_blink ath9k_tpt_blink[] = {
@@ -486,51 +381,6 @@ static int ath9k_init_queues(struct ath_softc *sc)
 	return 0;
 }
 
-static int ath9k_init_channels_rates(struct ath_softc *sc)
-{
-	void *channels;
-
-	BUILD_BUG_ON(ARRAY_SIZE(ath9k_2ghz_chantable) +
-		     ARRAY_SIZE(ath9k_5ghz_chantable) !=
-		     ATH9K_NUM_CHANNELS);
-
-	if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_2GHZ) {
-		channels = devm_kzalloc(sc->dev,
-			sizeof(ath9k_2ghz_chantable), GFP_KERNEL);
-		if (!channels)
-		    return -ENOMEM;
-
-		memcpy(channels, ath9k_2ghz_chantable,
-		       sizeof(ath9k_2ghz_chantable));
-		sc->sbands[IEEE80211_BAND_2GHZ].channels = channels;
-		sc->sbands[IEEE80211_BAND_2GHZ].band = IEEE80211_BAND_2GHZ;
-		sc->sbands[IEEE80211_BAND_2GHZ].n_channels =
-			ARRAY_SIZE(ath9k_2ghz_chantable);
-		sc->sbands[IEEE80211_BAND_2GHZ].bitrates = ath9k_legacy_rates;
-		sc->sbands[IEEE80211_BAND_2GHZ].n_bitrates =
-			ARRAY_SIZE(ath9k_legacy_rates);
-	}
-
-	if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_5GHZ) {
-		channels = devm_kzalloc(sc->dev,
-			sizeof(ath9k_5ghz_chantable), GFP_KERNEL);
-		if (!channels)
-			return -ENOMEM;
-
-		memcpy(channels, ath9k_5ghz_chantable,
-		       sizeof(ath9k_5ghz_chantable));
-		sc->sbands[IEEE80211_BAND_5GHZ].channels = channels;
-		sc->sbands[IEEE80211_BAND_5GHZ].band = IEEE80211_BAND_5GHZ;
-		sc->sbands[IEEE80211_BAND_5GHZ].n_channels =
-			ARRAY_SIZE(ath9k_5ghz_chantable);
-		sc->sbands[IEEE80211_BAND_5GHZ].bitrates =
-			ath9k_legacy_rates + 4;
-		sc->sbands[IEEE80211_BAND_5GHZ].n_bitrates =
-			ARRAY_SIZE(ath9k_legacy_rates) - 4;
-	}
-	return 0;
-}
-
 static void ath9k_init_misc(struct ath_softc *sc)
 {
 	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
@@ -793,7 +643,7 @@ static int ath9k_init_softc(u16 devid, struct ath_softc *sc,
 	if (ret)
 		goto err_btcoex;
 
-	ret = ath9k_init_channels_rates(sc);
+	ret = ath9k_cmn_init_channels_rates(common);
 	if (ret)
 		goto err_btcoex;
 
@@ -823,10 +673,11 @@ static void ath9k_init_band_txpower(struct ath_softc *sc, int band)
 	struct ieee80211_supported_band *sband;
 	struct ieee80211_channel *chan;
 	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
 	struct cfg80211_chan_def chandef;
 	int i;
 
-	sband = &sc->sbands[band];
+	sband = &common->sbands[band];
 	for (i = 0; i < sband->n_channels; i++) {
 		chan = &sband->channels[i];
 		ah->curchan = &ah->channels[chan->hw_value];
@@ -851,13 +702,16 @@ static void ath9k_init_txpower_limits(struct ath_softc *sc)
 
 void ath9k_reload_chainmask_settings(struct ath_softc *sc)
 {
-	if (!(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT))
+	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
+
+	if (!(ah->caps.hw_caps & ATH9K_HW_CAP_HT))
 		return;
 
-	if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_2GHZ)
-		setup_ht_cap(sc, &sc->sbands[IEEE80211_BAND_2GHZ].ht_cap);
-	if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_5GHZ)
-		setup_ht_cap(sc, &sc->sbands[IEEE80211_BAND_5GHZ].ht_cap);
+	if (ah->caps.hw_caps & ATH9K_HW_CAP_2GHZ)
+		setup_ht_cap(sc, &common->sbands[IEEE80211_BAND_2GHZ].ht_cap);
+	if (ah->caps.hw_caps & ATH9K_HW_CAP_5GHZ)
+		setup_ht_cap(sc, &common->sbands[IEEE80211_BAND_5GHZ].ht_cap);
 }
 
 static const struct ieee80211_iface_limit if_limits[] = {
@@ -970,10 +824,10 @@ static void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
 
 	if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_2GHZ)
 		hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
-			&sc->sbands[IEEE80211_BAND_2GHZ];
+			&common->sbands[IEEE80211_BAND_2GHZ];
 	if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_5GHZ)
 		hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
-			&sc->sbands[IEEE80211_BAND_5GHZ];
+			&common->sbands[IEEE80211_BAND_5GHZ];
 
 	ath9k_init_wow(hw);
 	ath9k_reload_chainmask_settings(sc);
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index a6507046dfe8..8f28711cfd4e 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -1076,6 +1076,7 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf,
 			     struct ath_tx_info *info, int len, bool rts)
 {
 	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
 	struct sk_buff *skb;
 	struct ieee80211_tx_info *tx_info;
 	struct ieee80211_tx_rate *rates;
@@ -1145,7 +1146,7 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf,
 		}
 
 		/* legacy rates */
-		rate = &sc->sbands[tx_info->band].bitrates[rates[i].idx];
+		rate = &common->sbands[tx_info->band].bitrates[rates[i].idx];
 		if ((tx_info->band == IEEE80211_BAND_2GHZ) &&
 		    !(rate->flags & IEEE80211_RATE_ERP_G))
 			phy = WLAN_RC_PHY_CCK;
-- 
cgit v1.2.2


From 31f023a1cb92678604d5a1427623348f5b896eab Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@rempel-privat.de>
Date: Tue, 25 Feb 2014 14:48:51 +0100
Subject: ath9k_htc: use ath9k_cmn_init_channels_rates

and ath_common sbands.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/htc.h          |   1 -
 drivers/net/wireless/ath/ath9k/htc_drv_init.c | 123 ++------------------------
 2 files changed, 6 insertions(+), 118 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/htc.h b/drivers/net/wireless/ath/ath9k/htc.h
index ba83f582bf4a..3baf9ceae601 100644
--- a/drivers/net/wireless/ath/ath9k/htc.h
+++ b/drivers/net/wireless/ath/ath9k/htc.h
@@ -487,7 +487,6 @@ struct ath9k_htc_priv {
 	unsigned long op_flags;
 
 	struct ath9k_hw_cal_data caldata;
-	struct ieee80211_supported_band sbands[IEEE80211_NUM_BANDS];
 
 	spinlock_t beacon_lock;
 	struct htc_beacon_config cur_beacon_conf;
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
index 8d0b9bcb47b4..752586d8c3ba 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
@@ -38,93 +38,6 @@ static int ath9k_ps_enable;
 module_param_named(ps_enable, ath9k_ps_enable, int, 0444);
 MODULE_PARM_DESC(ps_enable, "Enable WLAN PowerSave");
 
-#define CHAN2G(_freq, _idx)  { \
-	.center_freq = (_freq), \
-	.hw_value = (_idx), \
-	.max_power = 20, \
-}
-
-#define CHAN5G(_freq, _idx) { \
-	.band = IEEE80211_BAND_5GHZ, \
-	.center_freq = (_freq), \
-	.hw_value = (_idx), \
-	.max_power = 20, \
-}
-
-static struct ieee80211_channel ath9k_2ghz_channels[] = {
-	CHAN2G(2412, 0), /* Channel 1 */
-	CHAN2G(2417, 1), /* Channel 2 */
-	CHAN2G(2422, 2), /* Channel 3 */
-	CHAN2G(2427, 3), /* Channel 4 */
-	CHAN2G(2432, 4), /* Channel 5 */
-	CHAN2G(2437, 5), /* Channel 6 */
-	CHAN2G(2442, 6), /* Channel 7 */
-	CHAN2G(2447, 7), /* Channel 8 */
-	CHAN2G(2452, 8), /* Channel 9 */
-	CHAN2G(2457, 9), /* Channel 10 */
-	CHAN2G(2462, 10), /* Channel 11 */
-	CHAN2G(2467, 11), /* Channel 12 */
-	CHAN2G(2472, 12), /* Channel 13 */
-	CHAN2G(2484, 13), /* Channel 14 */
-};
-
-static struct ieee80211_channel ath9k_5ghz_channels[] = {
-	/* _We_ call this UNII 1 */
-	CHAN5G(5180, 14), /* Channel 36 */
-	CHAN5G(5200, 15), /* Channel 40 */
-	CHAN5G(5220, 16), /* Channel 44 */
-	CHAN5G(5240, 17), /* Channel 48 */
-	/* _We_ call this UNII 2 */
-	CHAN5G(5260, 18), /* Channel 52 */
-	CHAN5G(5280, 19), /* Channel 56 */
-	CHAN5G(5300, 20), /* Channel 60 */
-	CHAN5G(5320, 21), /* Channel 64 */
-	/* _We_ call this "Middle band" */
-	CHAN5G(5500, 22), /* Channel 100 */
-	CHAN5G(5520, 23), /* Channel 104 */
-	CHAN5G(5540, 24), /* Channel 108 */
-	CHAN5G(5560, 25), /* Channel 112 */
-	CHAN5G(5580, 26), /* Channel 116 */
-	CHAN5G(5600, 27), /* Channel 120 */
-	CHAN5G(5620, 28), /* Channel 124 */
-	CHAN5G(5640, 29), /* Channel 128 */
-	CHAN5G(5660, 30), /* Channel 132 */
-	CHAN5G(5680, 31), /* Channel 136 */
-	CHAN5G(5700, 32), /* Channel 140 */
-	/* _We_ call this UNII 3 */
-	CHAN5G(5745, 33), /* Channel 149 */
-	CHAN5G(5765, 34), /* Channel 153 */
-	CHAN5G(5785, 35), /* Channel 157 */
-	CHAN5G(5805, 36), /* Channel 161 */
-	CHAN5G(5825, 37), /* Channel 165 */
-};
-
-/* Atheros hardware rate code addition for short premble */
-#define SHPCHECK(__hw_rate, __flags) \
-	((__flags & IEEE80211_RATE_SHORT_PREAMBLE) ? (__hw_rate | 0x04) : 0)
-
-#define RATE(_bitrate, _hw_rate, _flags) {		\
-	.bitrate	= (_bitrate),			\
-	.flags		= (_flags),			\
-	.hw_value	= (_hw_rate),			\
-	.hw_value_short = (SHPCHECK(_hw_rate, _flags))	\
-}
-
-static struct ieee80211_rate ath9k_legacy_rates[] = {
-	RATE(10, 0x1b, 0),
-	RATE(20, 0x1a, IEEE80211_RATE_SHORT_PREAMBLE), /* shortp : 0x1e */
-	RATE(55, 0x19, IEEE80211_RATE_SHORT_PREAMBLE), /* shortp: 0x1d */
-	RATE(110, 0x18, IEEE80211_RATE_SHORT_PREAMBLE), /* short: 0x1c */
-	RATE(60, 0x0b, 0),
-	RATE(90, 0x0f, 0),
-	RATE(120, 0x0a, 0),
-	RATE(180, 0x0e, 0),
-	RATE(240, 0x09, 0),
-	RATE(360, 0x0d, 0),
-	RATE(480, 0x08, 0),
-	RATE(540, 0x0c, 0),
-};
-
 #ifdef CONFIG_MAC80211_LEDS
 static const struct ieee80211_tpt_blink ath9k_htc_tpt_blink[] = {
 	{ .throughput = 0 * 1024, .blink_time = 334 },
@@ -580,31 +493,6 @@ err:
 	return -EINVAL;
 }
 
-static void ath9k_init_channels_rates(struct ath9k_htc_priv *priv)
-{
-	if (priv->ah->caps.hw_caps & ATH9K_HW_CAP_2GHZ) {
-		priv->sbands[IEEE80211_BAND_2GHZ].channels =
-			ath9k_2ghz_channels;
-		priv->sbands[IEEE80211_BAND_2GHZ].band = IEEE80211_BAND_2GHZ;
-		priv->sbands[IEEE80211_BAND_2GHZ].n_channels =
-			ARRAY_SIZE(ath9k_2ghz_channels);
-		priv->sbands[IEEE80211_BAND_2GHZ].bitrates = ath9k_legacy_rates;
-		priv->sbands[IEEE80211_BAND_2GHZ].n_bitrates =
-			ARRAY_SIZE(ath9k_legacy_rates);
-	}
-
-	if (priv->ah->caps.hw_caps & ATH9K_HW_CAP_5GHZ) {
-		priv->sbands[IEEE80211_BAND_5GHZ].channels = ath9k_5ghz_channels;
-		priv->sbands[IEEE80211_BAND_5GHZ].band = IEEE80211_BAND_5GHZ;
-		priv->sbands[IEEE80211_BAND_5GHZ].n_channels =
-			ARRAY_SIZE(ath9k_5ghz_channels);
-		priv->sbands[IEEE80211_BAND_5GHZ].bitrates =
-			ath9k_legacy_rates + 4;
-		priv->sbands[IEEE80211_BAND_5GHZ].n_bitrates =
-			ARRAY_SIZE(ath9k_legacy_rates) - 4;
-	}
-}
-
 static void ath9k_init_misc(struct ath9k_htc_priv *priv)
 {
 	struct ath_common *common = ath9k_hw_common(priv->ah);
@@ -629,6 +517,7 @@ static int ath9k_init_priv(struct ath9k_htc_priv *priv,
 	if (!ah)
 		return -ENOMEM;
 
+	ah->dev = priv->dev;
 	ah->hw_version.devid = devid;
 	ah->hw_version.usbdev = drv_info;
 	ah->ah_flags |= AH_USE_EEPROM;
@@ -685,8 +574,8 @@ static int ath9k_init_priv(struct ath9k_htc_priv *priv,
 	for (i = 0; i < ATH9K_HTC_MAX_BCN_VIF; i++)
 		priv->cur_beacon_conf.bslot[i] = NULL;
 
+	ath9k_cmn_init_channels_rates(common);
 	ath9k_cmn_init_crypto(ah);
-	ath9k_init_channels_rates(priv);
 	ath9k_init_misc(priv);
 	ath9k_htc_init_btcoex(priv, product);
 
@@ -766,18 +655,18 @@ static void ath9k_set_hw_capab(struct ath9k_htc_priv *priv,
 
 	if (priv->ah->caps.hw_caps & ATH9K_HW_CAP_2GHZ)
 		hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
-			&priv->sbands[IEEE80211_BAND_2GHZ];
+			&common->sbands[IEEE80211_BAND_2GHZ];
 	if (priv->ah->caps.hw_caps & ATH9K_HW_CAP_5GHZ)
 		hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
-			&priv->sbands[IEEE80211_BAND_5GHZ];
+			&common->sbands[IEEE80211_BAND_5GHZ];
 
 	if (priv->ah->caps.hw_caps & ATH9K_HW_CAP_HT) {
 		if (priv->ah->caps.hw_caps & ATH9K_HW_CAP_2GHZ)
 			setup_ht_cap(priv,
-				     &priv->sbands[IEEE80211_BAND_2GHZ].ht_cap);
+				     &common->sbands[IEEE80211_BAND_2GHZ].ht_cap);
 		if (priv->ah->caps.hw_caps & ATH9K_HW_CAP_5GHZ)
 			setup_ht_cap(priv,
-				     &priv->sbands[IEEE80211_BAND_5GHZ].ht_cap);
+				     &common->sbands[IEEE80211_BAND_5GHZ].ht_cap);
 	}
 
 	pBase = ath9k_htc_get_eeprom_base(priv);
-- 
cgit v1.2.2


From b60d105242ac457dab057f676c8aaa20d1821b10 Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@rempel-privat.de>
Date: Tue, 25 Feb 2014 14:48:52 +0100
Subject: ath9k: move setup_ht_cap to common-init

and rename it to ath9k_cmn_setup_ht_cap

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/common-init.c | 58 ++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath9k/common-init.h |  2 +
 drivers/net/wireless/ath/ath9k/init.c        | 62 +---------------------------
 3 files changed, 62 insertions(+), 60 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/common-init.c b/drivers/net/wireless/ath/ath9k/common-init.c
index 1fa30c3b7d53..8e2fa0385c58 100644
--- a/drivers/net/wireless/ath/ath9k/common-init.c
+++ b/drivers/net/wireless/ath/ath9k/common-init.c
@@ -168,3 +168,61 @@ int ath9k_cmn_init_channels_rates(struct ath_common *common)
 	return 0;
 }
 EXPORT_SYMBOL(ath9k_cmn_init_channels_rates);
+
+void ath9k_cmn_setup_ht_cap(struct ath_hw *ah,
+			    struct ieee80211_sta_ht_cap *ht_info)
+{
+	struct ath_common *common = ath9k_hw_common(ah);
+	u8 tx_streams, rx_streams;
+	int i, max_streams;
+
+	ht_info->ht_supported = true;
+	ht_info->cap = IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
+		       IEEE80211_HT_CAP_SM_PS |
+		       IEEE80211_HT_CAP_SGI_40 |
+		       IEEE80211_HT_CAP_DSSSCCK40;
+
+	if (ah->caps.hw_caps & ATH9K_HW_CAP_LDPC)
+		ht_info->cap |= IEEE80211_HT_CAP_LDPC_CODING;
+
+	if (ah->caps.hw_caps & ATH9K_HW_CAP_SGI_20)
+		ht_info->cap |= IEEE80211_HT_CAP_SGI_20;
+
+	ht_info->ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K;
+	ht_info->ampdu_density = IEEE80211_HT_MPDU_DENSITY_8;
+
+	if (AR_SREV_9330(ah) || AR_SREV_9485(ah) || AR_SREV_9565(ah))
+		max_streams = 1;
+	else if (AR_SREV_9462(ah))
+		max_streams = 2;
+	else if (AR_SREV_9300_20_OR_LATER(ah))
+		max_streams = 3;
+	else
+		max_streams = 2;
+
+	if (AR_SREV_9280_20_OR_LATER(ah)) {
+		if (max_streams >= 2)
+			ht_info->cap |= IEEE80211_HT_CAP_TX_STBC;
+		ht_info->cap |= (1 << IEEE80211_HT_CAP_RX_STBC_SHIFT);
+	}
+
+	/* set up supported mcs set */
+	memset(&ht_info->mcs, 0, sizeof(ht_info->mcs));
+	tx_streams = ath9k_cmn_count_streams(ah->txchainmask, max_streams);
+	rx_streams = ath9k_cmn_count_streams(ah->rxchainmask, max_streams);
+
+	ath_dbg(common, CONFIG, "TX streams %d, RX streams: %d\n",
+		tx_streams, rx_streams);
+
+	if (tx_streams != rx_streams) {
+		ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_RX_DIFF;
+		ht_info->mcs.tx_params |= ((tx_streams - 1) <<
+				IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT);
+	}
+
+	for (i = 0; i < rx_streams; i++)
+		ht_info->mcs.rx_mask[i] = 0xff;
+
+	ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_DEFINED;
+}
+EXPORT_SYMBOL(ath9k_cmn_setup_ht_cap);
diff --git a/drivers/net/wireless/ath/ath9k/common-init.h b/drivers/net/wireless/ath/ath9k/common-init.h
index 8fc9049ad8b0..6e678ca8149b 100644
--- a/drivers/net/wireless/ath/ath9k/common-init.h
+++ b/drivers/net/wireless/ath/ath9k/common-init.h
@@ -15,3 +15,5 @@
  */
 
 int ath9k_cmn_init_channels_rates(struct ath_common *common);
+void ath9k_cmn_setup_ht_cap(struct ath_hw *ah,
+			    struct ieee80211_sta_ht_cap *ht_info);
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index a6232cf0e998..88be85274b40 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -153,64 +153,6 @@ static unsigned int ath9k_reg_rmw(void *hw_priv, u32 reg_offset, u32 set, u32 cl
 /*     Initialization     */
 /**************************/
 
-static void setup_ht_cap(struct ath_softc *sc,
-			 struct ieee80211_sta_ht_cap *ht_info)
-{
-	struct ath_hw *ah = sc->sc_ah;
-	struct ath_common *common = ath9k_hw_common(ah);
-	u8 tx_streams, rx_streams;
-	int i, max_streams;
-
-	ht_info->ht_supported = true;
-	ht_info->cap = IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
-		       IEEE80211_HT_CAP_SM_PS |
-		       IEEE80211_HT_CAP_SGI_40 |
-		       IEEE80211_HT_CAP_DSSSCCK40;
-
-	if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_LDPC)
-		ht_info->cap |= IEEE80211_HT_CAP_LDPC_CODING;
-
-	if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_SGI_20)
-		ht_info->cap |= IEEE80211_HT_CAP_SGI_20;
-
-	ht_info->ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K;
-	ht_info->ampdu_density = IEEE80211_HT_MPDU_DENSITY_8;
-
-	if (AR_SREV_9330(ah) || AR_SREV_9485(ah) || AR_SREV_9565(ah))
-		max_streams = 1;
-	else if (AR_SREV_9462(ah))
-		max_streams = 2;
-	else if (AR_SREV_9300_20_OR_LATER(ah))
-		max_streams = 3;
-	else
-		max_streams = 2;
-
-	if (AR_SREV_9280_20_OR_LATER(ah)) {
-		if (max_streams >= 2)
-			ht_info->cap |= IEEE80211_HT_CAP_TX_STBC;
-		ht_info->cap |= (1 << IEEE80211_HT_CAP_RX_STBC_SHIFT);
-	}
-
-	/* set up supported mcs set */
-	memset(&ht_info->mcs, 0, sizeof(ht_info->mcs));
-	tx_streams = ath9k_cmn_count_streams(ah->txchainmask, max_streams);
-	rx_streams = ath9k_cmn_count_streams(ah->rxchainmask, max_streams);
-
-	ath_dbg(common, CONFIG, "TX streams %d, RX streams: %d\n",
-		tx_streams, rx_streams);
-
-	if (tx_streams != rx_streams) {
-		ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_RX_DIFF;
-		ht_info->mcs.tx_params |= ((tx_streams - 1) <<
-				IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT);
-	}
-
-	for (i = 0; i < rx_streams; i++)
-		ht_info->mcs.rx_mask[i] = 0xff;
-
-	ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_DEFINED;
-}
-
 static void ath9k_reg_notifier(struct wiphy *wiphy,
 			       struct regulatory_request *request)
 {
@@ -709,9 +651,9 @@ void ath9k_reload_chainmask_settings(struct ath_softc *sc)
 		return;
 
 	if (ah->caps.hw_caps & ATH9K_HW_CAP_2GHZ)
-		setup_ht_cap(sc, &common->sbands[IEEE80211_BAND_2GHZ].ht_cap);
+		ath9k_cmn_setup_ht_cap(ah, &common->sbands[IEEE80211_BAND_2GHZ].ht_cap);
 	if (ah->caps.hw_caps & ATH9K_HW_CAP_5GHZ)
-		setup_ht_cap(sc, &common->sbands[IEEE80211_BAND_5GHZ].ht_cap);
+		ath9k_cmn_setup_ht_cap(ah, &common->sbands[IEEE80211_BAND_5GHZ].ht_cap);
 }
 
 static const struct ieee80211_iface_limit if_limits[] = {
-- 
cgit v1.2.2


From e9fb588867091b25d413d6e70b4cfb8886edec89 Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@rempel-privat.de>
Date: Tue, 25 Feb 2014 14:48:53 +0100
Subject: ath9k_htc: use ath9k_cmn_setup_ht_cap

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/htc_drv_init.c | 50 ++-------------------------
 1 file changed, 3 insertions(+), 47 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
index 752586d8c3ba..5220f4644b1d 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
@@ -404,51 +404,6 @@ static const struct ath_bus_ops ath9k_usb_bus_ops = {
 	.eeprom_read = ath_usb_eeprom_read,
 };
 
-static void setup_ht_cap(struct ath9k_htc_priv *priv,
-			 struct ieee80211_sta_ht_cap *ht_info)
-{
-	struct ath_common *common = ath9k_hw_common(priv->ah);
-	u8 tx_streams, rx_streams;
-	int i;
-
-	ht_info->ht_supported = true;
-	ht_info->cap = IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
-		       IEEE80211_HT_CAP_SM_PS |
-		       IEEE80211_HT_CAP_SGI_40 |
-		       IEEE80211_HT_CAP_DSSSCCK40;
-
-	if (priv->ah->caps.hw_caps & ATH9K_HW_CAP_SGI_20)
-		ht_info->cap |= IEEE80211_HT_CAP_SGI_20;
-
-	ht_info->cap |= (1 << IEEE80211_HT_CAP_RX_STBC_SHIFT);
-
-	ht_info->ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K;
-	ht_info->ampdu_density = IEEE80211_HT_MPDU_DENSITY_8;
-
-	memset(&ht_info->mcs, 0, sizeof(ht_info->mcs));
-
-	/* ath9k_htc supports only 1 or 2 stream devices */
-	tx_streams = ath9k_cmn_count_streams(priv->ah->txchainmask, 2);
-	rx_streams = ath9k_cmn_count_streams(priv->ah->rxchainmask, 2);
-
-	ath_dbg(common, CONFIG, "TX streams %d, RX streams: %d\n",
-		tx_streams, rx_streams);
-
-	if (tx_streams >= 2)
-		ht_info->cap |= IEEE80211_HT_CAP_TX_STBC;
-
-	if (tx_streams != rx_streams) {
-		ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_RX_DIFF;
-		ht_info->mcs.tx_params |= ((tx_streams - 1) <<
-					   IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT);
-	}
-
-	for (i = 0; i < rx_streams; i++)
-		ht_info->mcs.rx_mask[i] = 0xff;
-
-	ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_DEFINED;
-}
-
 static int ath9k_init_queues(struct ath9k_htc_priv *priv)
 {
 	struct ath_common *common = ath9k_hw_common(priv->ah);
@@ -611,6 +566,7 @@ static const struct ieee80211_iface_combination if_comb = {
 static void ath9k_set_hw_capab(struct ath9k_htc_priv *priv,
 			       struct ieee80211_hw *hw)
 {
+	struct ath_hw *ah = priv->ah;
 	struct ath_common *common = ath9k_hw_common(priv->ah);
 	struct base_eep_header *pBase;
 
@@ -662,10 +618,10 @@ static void ath9k_set_hw_capab(struct ath9k_htc_priv *priv,
 
 	if (priv->ah->caps.hw_caps & ATH9K_HW_CAP_HT) {
 		if (priv->ah->caps.hw_caps & ATH9K_HW_CAP_2GHZ)
-			setup_ht_cap(priv,
+			ath9k_cmn_setup_ht_cap(ah,
 				     &common->sbands[IEEE80211_BAND_2GHZ].ht_cap);
 		if (priv->ah->caps.hw_caps & ATH9K_HW_CAP_5GHZ)
-			setup_ht_cap(priv,
+			ath9k_cmn_setup_ht_cap(ah,
 				     &common->sbands[IEEE80211_BAND_5GHZ].ht_cap);
 	}
 
-- 
cgit v1.2.2


From 91884fad852da4d00b1a5f5d57203e08884a3c1d Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@rempel-privat.de>
Date: Tue, 25 Feb 2014 14:48:54 +0100
Subject: ath9k-common: set maxstream=1 for ar9271

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/common-init.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/common-init.c b/drivers/net/wireless/ath/ath9k/common-init.c
index 8e2fa0385c58..8775ab2db2ef 100644
--- a/drivers/net/wireless/ath/ath9k/common-init.c
+++ b/drivers/net/wireless/ath/ath9k/common-init.c
@@ -191,7 +191,7 @@ void ath9k_cmn_setup_ht_cap(struct ath_hw *ah,
 	ht_info->ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K;
 	ht_info->ampdu_density = IEEE80211_HT_MPDU_DENSITY_8;
 
-	if (AR_SREV_9330(ah) || AR_SREV_9485(ah) || AR_SREV_9565(ah))
+	if (AR_SREV_9271(ah) || AR_SREV_9330(ah) || AR_SREV_9485(ah) || AR_SREV_9565(ah))
 		max_streams = 1;
 	else if (AR_SREV_9462(ah))
 		max_streams = 2;
-- 
cgit v1.2.2


From b57ba3b2f7b00e1241c2ebabb0906321a4e64414 Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@rempel-privat.de>
Date: Tue, 25 Feb 2014 14:48:55 +0100
Subject: ath9k: move ath9k_reload_chainmask_settings to common

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/common-init.c | 16 ++++++++++++++++
 drivers/net/wireless/ath/ath9k/common-init.h |  1 +
 drivers/net/wireless/ath/ath9k/init.c        | 16 +---------------
 drivers/net/wireless/ath/ath9k/main.c        |  2 +-
 4 files changed, 19 insertions(+), 16 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/common-init.c b/drivers/net/wireless/ath/ath9k/common-init.c
index 8775ab2db2ef..a006c1499728 100644
--- a/drivers/net/wireless/ath/ath9k/common-init.c
+++ b/drivers/net/wireless/ath/ath9k/common-init.c
@@ -226,3 +226,19 @@ void ath9k_cmn_setup_ht_cap(struct ath_hw *ah,
 	ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_DEFINED;
 }
 EXPORT_SYMBOL(ath9k_cmn_setup_ht_cap);
+
+void ath9k_cmn_reload_chainmask(struct ath_hw *ah)
+{
+	struct ath_common *common = ath9k_hw_common(ah);
+
+	if (!(ah->caps.hw_caps & ATH9K_HW_CAP_HT))
+		return;
+
+	if (ah->caps.hw_caps & ATH9K_HW_CAP_2GHZ)
+		ath9k_cmn_setup_ht_cap(ah,
+			&common->sbands[IEEE80211_BAND_2GHZ].ht_cap);
+	if (ah->caps.hw_caps & ATH9K_HW_CAP_5GHZ)
+		ath9k_cmn_setup_ht_cap(ah,
+			&common->sbands[IEEE80211_BAND_5GHZ].ht_cap);
+}
+EXPORT_SYMBOL(ath9k_cmn_reload_chainmask);
diff --git a/drivers/net/wireless/ath/ath9k/common-init.h b/drivers/net/wireless/ath/ath9k/common-init.h
index 6e678ca8149b..ac03fca5ffdd 100644
--- a/drivers/net/wireless/ath/ath9k/common-init.h
+++ b/drivers/net/wireless/ath/ath9k/common-init.h
@@ -17,3 +17,4 @@
 int ath9k_cmn_init_channels_rates(struct ath_common *common);
 void ath9k_cmn_setup_ht_cap(struct ath_hw *ah,
 			    struct ieee80211_sta_ht_cap *ht_info);
+void ath9k_cmn_reload_chainmask(struct ath_hw *ah);
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 88be85274b40..c0a4e866edca 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -642,20 +642,6 @@ static void ath9k_init_txpower_limits(struct ath_softc *sc)
 	ah->curchan = curchan;
 }
 
-void ath9k_reload_chainmask_settings(struct ath_softc *sc)
-{
-	struct ath_hw *ah = sc->sc_ah;
-	struct ath_common *common = ath9k_hw_common(ah);
-
-	if (!(ah->caps.hw_caps & ATH9K_HW_CAP_HT))
-		return;
-
-	if (ah->caps.hw_caps & ATH9K_HW_CAP_2GHZ)
-		ath9k_cmn_setup_ht_cap(ah, &common->sbands[IEEE80211_BAND_2GHZ].ht_cap);
-	if (ah->caps.hw_caps & ATH9K_HW_CAP_5GHZ)
-		ath9k_cmn_setup_ht_cap(ah, &common->sbands[IEEE80211_BAND_5GHZ].ht_cap);
-}
-
 static const struct ieee80211_iface_limit if_limits[] = {
 	{ .max = 2048,	.types = BIT(NL80211_IFTYPE_STATION) |
 				 BIT(NL80211_IFTYPE_P2P_CLIENT) |
@@ -772,7 +758,7 @@ static void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
 			&common->sbands[IEEE80211_BAND_5GHZ];
 
 	ath9k_init_wow(hw);
-	ath9k_reload_chainmask_settings(sc);
+	ath9k_cmn_reload_chainmask(ah);
 
 	SET_IEEE80211_PERM_ADDR(hw, common->macaddr);
 }
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 14a7524b4b50..42a18037004e 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -2053,7 +2053,7 @@ static int ath9k_set_antenna(struct ieee80211_hw *hw, u32 tx_ant, u32 rx_ant)
 		ah->rxchainmask = fill_chainmask(ah->caps.rx_chainmask, rx_ant);
 
 	ah->txchainmask = fill_chainmask(ah->caps.tx_chainmask, tx_ant);
-	ath9k_reload_chainmask_settings(sc);
+	ath9k_cmn_reload_chainmask(ah);
 
 	return 0;
 }
-- 
cgit v1.2.2


From 6da2f4ad9d125a81ce53af9c522856039f62718b Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@rempel-privat.de>
Date: Tue, 25 Feb 2014 14:48:56 +0100
Subject: ath9k_htc: use ath9k_cmn_reload_chainmask

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/htc_drv_init.c | 9 +--------
 1 file changed, 1 insertion(+), 8 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
index 5220f4644b1d..a8f30dc448bb 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
@@ -616,14 +616,7 @@ static void ath9k_set_hw_capab(struct ath9k_htc_priv *priv,
 		hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
 			&common->sbands[IEEE80211_BAND_5GHZ];
 
-	if (priv->ah->caps.hw_caps & ATH9K_HW_CAP_HT) {
-		if (priv->ah->caps.hw_caps & ATH9K_HW_CAP_2GHZ)
-			ath9k_cmn_setup_ht_cap(ah,
-				     &common->sbands[IEEE80211_BAND_2GHZ].ht_cap);
-		if (priv->ah->caps.hw_caps & ATH9K_HW_CAP_5GHZ)
-			ath9k_cmn_setup_ht_cap(ah,
-				     &common->sbands[IEEE80211_BAND_5GHZ].ht_cap);
-	}
+	ath9k_cmn_reload_chainmask(ah);
 
 	pBase = ath9k_htc_get_eeprom_base(priv);
 	if (pBase) {
-- 
cgit v1.2.2


From 68ca395f94e932a2d9a775f2c103c5bce257e795 Mon Sep 17 00:00:00 2001
From: Hante Meuleman <meuleman@broadcom.com>
Date: Tue, 25 Feb 2014 20:30:26 +0100
Subject: brcmfmac: Make firmeware roaming a module param.

Internal firmware roaming is enabled by default. This patch
makes it possible to disable internal firmware roaming by
specifying roamoff=1 as module param.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 .../net/wireless/brcm80211/brcmfmac/wl_cfg80211.c  | 38 ++++++++++++++--------
 .../net/wireless/brcm80211/brcmfmac/wl_cfg80211.h  |  1 -
 2 files changed, 25 insertions(+), 14 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
index a54db9185747..474df2ce6e3b 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
@@ -18,6 +18,7 @@
 
 #include <linux/kernel.h>
 #include <linux/etherdevice.h>
+#include <linux/module.h>
 #include <net/cfg80211.h>
 #include <net/netlink.h>
 
@@ -251,6 +252,10 @@ struct parsed_vndr_ies {
 	struct parsed_vndr_ie_info ie_info[VNDR_IE_PARSE_LIMIT];
 };
 
+static int brcmf_roamoff;
+module_param_named(roamoff, brcmf_roamoff, int, S_IRUSR);
+MODULE_PARM_DESC(roamoff, "do not use internal roaming engine");
+
 /* Quarter dBm units to mW
  * Table starts at QDBM_OFFSET, so the first entry is mW for qdBm=153
  * Table is offset so the last entry is largest mW value that fits in
@@ -4444,7 +4449,9 @@ static bool brcmf_is_linkdown(const struct brcmf_event_msg *e)
 	u32 event = e->event_code;
 	u16 flags = e->flags;
 
-	if (event == BRCMF_E_LINK && (!(flags & BRCMF_EVENT_MSG_LINK))) {
+	if ((event == BRCMF_E_DEAUTH) || (event == BRCMF_E_DEAUTH_IND) ||
+	    (event == BRCMF_E_DISASSOC_IND) ||
+	    ((event == BRCMF_E_LINK) && (!(flags & BRCMF_EVENT_MSG_LINK)))) {
 		brcmf_dbg(CONN, "Processing link down\n");
 		return true;
 	}
@@ -4688,6 +4695,7 @@ brcmf_notify_connect_status(struct brcmf_if *ifp,
 	struct brcmf_cfg80211_profile *profile = &ifp->vif->profile;
 	struct ieee80211_channel *chan;
 	s32 err = 0;
+	u16 reason;
 
 	if (ifp->vif->mode == WL_MODE_AP) {
 		err = brcmf_notify_connect_status_ap(cfg, ndev, e, data);
@@ -4709,9 +4717,15 @@ brcmf_notify_connect_status(struct brcmf_if *ifp,
 		if (!brcmf_is_ibssmode(ifp->vif)) {
 			brcmf_bss_connect_done(cfg, ndev, e, false);
 			if (test_and_clear_bit(BRCMF_VIF_STATUS_CONNECTED,
-					       &ifp->vif->sme_state))
-				cfg80211_disconnected(ndev, 0, NULL, 0,
+					       &ifp->vif->sme_state)) {
+				reason = 0;
+				if (((e->event_code == BRCMF_E_DEAUTH_IND) ||
+				     (e->event_code == BRCMF_E_DISASSOC_IND)) &&
+				    (e->reason != WLAN_REASON_UNSPECIFIED))
+					reason = e->reason;
+				cfg80211_disconnected(ndev, reason, NULL, 0,
 						      GFP_KERNEL);
+			}
 		}
 		brcmf_link_down(ifp->vif);
 		brcmf_init_prof(ndev_to_prof(ndev));
@@ -4905,11 +4919,8 @@ static s32 wl_init_priv(struct brcmf_cfg80211_info *cfg)
 
 	cfg->scan_request = NULL;
 	cfg->pwr_save = true;
-	cfg->roam_on = true;	/* roam on & off switch.
-				 we enable roam per default */
-	cfg->active_scan = true;	/* we do active scan for
-				 specific scan per default */
-	cfg->dongle_up = false;	/* dongle is not up yet */
+	cfg->active_scan = true;	/* we do active scan per default */
+	cfg->dongle_up = false;		/* dongle is not up yet */
 	err = brcmf_init_priv_mem(cfg);
 	if (err)
 		return err;
@@ -5029,7 +5040,7 @@ void brcmf_cfg80211_detach(struct brcmf_cfg80211_info *cfg)
 }
 
 static s32
-brcmf_dongle_roam(struct brcmf_if *ifp, u32 roamvar, u32 bcn_timeout)
+brcmf_dongle_roam(struct brcmf_if *ifp, u32 bcn_timeout)
 {
 	s32 err = 0;
 	__le32 roamtrigger[2];
@@ -5039,7 +5050,7 @@ brcmf_dongle_roam(struct brcmf_if *ifp, u32 roamvar, u32 bcn_timeout)
 	 * Setup timeout if Beacons are lost and roam is
 	 * off to report link down
 	 */
-	if (roamvar) {
+	if (brcmf_roamoff) {
 		err = brcmf_fil_iovar_int_set(ifp, "bcn_timeout", bcn_timeout);
 		if (err) {
 			brcmf_err("bcn_timeout error (%d)\n", err);
@@ -5051,8 +5062,9 @@ brcmf_dongle_roam(struct brcmf_if *ifp, u32 roamvar, u32 bcn_timeout)
 	 * Enable/Disable built-in roaming to allow supplicant
 	 * to take care of roaming
 	 */
-	brcmf_dbg(INFO, "Internal Roaming = %s\n", roamvar ? "Off" : "On");
-	err = brcmf_fil_iovar_int_set(ifp, "roam_off", roamvar);
+	brcmf_dbg(INFO, "Internal Roaming = %s\n",
+		  brcmf_roamoff ? "Off" : "On");
+	err = brcmf_fil_iovar_int_set(ifp, "roam_off", !!(brcmf_roamoff));
 	if (err) {
 		brcmf_err("roam_off error (%d)\n", err);
 		goto dongle_rom_out;
@@ -5408,7 +5420,7 @@ static s32 brcmf_config_dongle(struct brcmf_cfg80211_info *cfg)
 	brcmf_dbg(INFO, "power save set to %s\n",
 		  (power_mode ? "enabled" : "disabled"));
 
-	err = brcmf_dongle_roam(ifp, (cfg->roam_on ? 0 : 1), WL_BEACON_TIMEOUT);
+	err = brcmf_dongle_roam(ifp, WL_BEACON_TIMEOUT);
 	if (err)
 		goto default_conf_out;
 	err = brcmf_cfg80211_change_iface(wdev->wiphy, ndev, wdev->iftype,
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h
index 254feed2860e..5715bb0708cf 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h
@@ -402,7 +402,6 @@ struct brcmf_cfg80211_info {
 	bool ibss_starter;
 	bool pwr_save;
 	bool dongle_up;
-	bool roam_on;
 	bool scan_tried;
 	u8 *dcmd_buf;
 	u8 *extra_buf;
-- 
cgit v1.2.2


From 5aa9f0ea18f3d5ec329a619b0bc54e214e02bc33 Mon Sep 17 00:00:00 2001
From: Arend van Spriel <arend@broadcom.com>
Date: Tue, 25 Feb 2014 20:30:27 +0100
Subject: brcmfmac: fix use of skb control buffer in SDIO driver part

The SDIO driver has a 16-bit field defined in the skbuff control buffer.
However, it is accessed as a u32 overwriting other control info. Another
issue is that the field is not initialized for networking packets, but
the control buffer content is unspecified as other networking layers can
use it.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index 631d5dc5b6d5..fa4ec69871c7 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -2112,7 +2112,7 @@ static int brcmf_sdio_txpkt_prep_sg(struct brcmf_sdio *bus,
 		memcpy(pkt_pad->data,
 		       pkt->data + pkt->len - tail_chop,
 		       tail_chop);
-		*(u32 *)(pkt_pad->cb) = ALIGN_SKB_FLAG + tail_chop;
+		*(u16 *)(pkt_pad->cb) = ALIGN_SKB_FLAG + tail_chop;
 		skb_trim(pkt, pkt->len - tail_chop);
 		__skb_queue_after(pktq, pkt, pkt_pad);
 	} else {
@@ -2159,7 +2159,7 @@ brcmf_sdio_txpkt_prep(struct brcmf_sdio *bus, struct sk_buff_head *pktq,
 		 * already properly aligned and does not
 		 * need an sdpcm header.
 		 */
-		if (*(u32 *)(pkt_next->cb) & ALIGN_SKB_FLAG)
+		if (*(u16 *)(pkt_next->cb) & ALIGN_SKB_FLAG)
 			continue;
 
 		/* align packet data pointer */
@@ -2223,11 +2223,11 @@ brcmf_sdio_txpkt_postp(struct brcmf_sdio *bus, struct sk_buff_head *pktq)
 	u8 *hdr;
 	u32 dat_offset;
 	u16 tail_pad;
-	u32 dummy_flags, chop_len;
+	u16 dummy_flags, chop_len;
 	struct sk_buff *pkt_next, *tmp, *pkt_prev;
 
 	skb_queue_walk_safe(pktq, pkt_next, tmp) {
-		dummy_flags = *(u32 *)(pkt_next->cb);
+		dummy_flags = *(u16 *)(pkt_next->cb);
 		if (dummy_flags & ALIGN_SKB_FLAG) {
 			chop_len = dummy_flags & ALIGN_SKB_CHOP_LEN_MASK;
 			if (chop_len) {
@@ -2709,6 +2709,8 @@ static int brcmf_sdio_bus_txdata(struct device *dev, struct sk_buff *pkt)
 
 	/* Priority based enq */
 	spin_lock_irqsave(&bus->txqlock, flags);
+	/* reset bus_flags in packet cb */
+	*(u16 *)(pkt->cb) = 0;
 	if (!brcmf_c_prec_enq(bus->sdiodev->dev, &bus->txq, pkt, prec)) {
 		skb_pull(pkt, bus->tx_hdrlen);
 		brcmf_err("out of bus->txq !!!\n");
-- 
cgit v1.2.2


From 44ff5660e5cf5ccb739e77a19d2ecf1144cf9e36 Mon Sep 17 00:00:00 2001
From: Arend van Spriel <arend@broadcom.com>
Date: Tue, 25 Feb 2014 20:30:28 +0100
Subject: brcmfmac: remove unused variable data_len from
 brcmf_sdio_bus_txdata()

The local variable data_len is assigned but never used so get rid
of it.

Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index fa4ec69871c7..ce1ee1e2f229 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -2686,15 +2686,13 @@ static struct pktq *brcmf_sdio_bus_gettxq(struct device *dev)
 static int brcmf_sdio_bus_txdata(struct device *dev, struct sk_buff *pkt)
 {
 	int ret = -EBADE;
-	uint datalen, prec;
+	uint prec;
 	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
 	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
 	struct brcmf_sdio *bus = sdiodev->bus;
 	ulong flags;
 
-	brcmf_dbg(TRACE, "Enter\n");
-
-	datalen = pkt->len;
+	brcmf_dbg(TRACE, "Enter: pkt: data %p len %d\n", pkt->data, pkt->len);
 
 	/* Add space for the header */
 	skb_push(pkt, bus->tx_hdrlen);
-- 
cgit v1.2.2


From 47ab4cd893f565a1093f316ec95babfa181e722a Mon Sep 17 00:00:00 2001
From: Hante Meuleman <meuleman@broadcom.com>
Date: Tue, 25 Feb 2014 20:30:29 +0100
Subject: brcmfmac: Correct header debug dump for sdio tx hdrs.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index ce1ee1e2f229..ce997324370b 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -2193,10 +2193,10 @@ brcmf_sdio_txpkt_prep(struct brcmf_sdio *bus, struct sk_buff_head *pktq,
 		if (BRCMF_BYTES_ON() &&
 		    ((BRCMF_CTL_ON() && chan == SDPCM_CONTROL_CHANNEL) ||
 		     (BRCMF_DATA_ON() && chan != SDPCM_CONTROL_CHANNEL)))
-			brcmf_dbg_hex_dump(true, pkt_next, hd_info.len,
+			brcmf_dbg_hex_dump(true, pkt_next->data, hd_info.len,
 					   "Tx Frame:\n");
 		else if (BRCMF_HDRS_ON())
-			brcmf_dbg_hex_dump(true, pkt_next,
+			brcmf_dbg_hex_dump(true, pkt_next->data,
 					   head_pad + bus->tx_hdrlen,
 					   "Tx Header:\n");
 	}
-- 
cgit v1.2.2


From 05c2c7671393edf4fd3870db4de14eb6fff276d5 Mon Sep 17 00:00:00 2001
From: Hante Meuleman <meuleman@broadcom.com>
Date: Tue, 25 Feb 2014 20:30:30 +0100
Subject: brcmfmac: de-init driver layers in correct order.

First clean up fw signalling, before cleaning up the bus and
proto layer. Old order can cause oops in some circumstances.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
index d4d966beb840..7d28cd385092 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
@@ -1040,12 +1040,12 @@ void brcmf_detach(struct device *dev)
 
 	brcmf_cfg80211_detach(drvr->config);
 
+	brcmf_fws_deinit(drvr);
+
 	brcmf_bus_detach(drvr);
 
 	brcmf_proto_detach(drvr);
 
-	brcmf_fws_deinit(drvr);
-
 	brcmf_debugfs_detach(drvr);
 	bus_if->drvr = NULL;
 	kfree(drvr);
-- 
cgit v1.2.2


From 71abdc00d54bb48ad2df4f9710ac661cf3aed30d Mon Sep 17 00:00:00 2001
From: Hante Meuleman <meuleman@broadcom.com>
Date: Tue, 25 Feb 2014 20:30:31 +0100
Subject: brcmfmac: Minimize SDIO dpc scheduling.

SDIO dpc scheduling is done (repeated) when counter is set. This
counter gets decreased when dpc is finished. It is more efficient
to set counter to 0 before the dpc is actullay run. This will
minimize the frequency with which dpc is executed.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index ce997324370b..cc0f1ad8b42c 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -3758,8 +3758,8 @@ static void brcmf_sdio_dataworker(struct work_struct *work)
 					      datawork);
 
 	while (atomic_read(&bus->dpc_tskcnt)) {
+		atomic_set(&bus->dpc_tskcnt, 0);
 		brcmf_sdio_dpc(bus);
-		atomic_dec(&bus->dpc_tskcnt);
 	}
 }
 
-- 
cgit v1.2.2


From 6f6c195b95136e0b2972b3c5213f6cd876c4fa8f Mon Sep 17 00:00:00 2001
From: Hante Meuleman <meuleman@broadcom.com>
Date: Tue, 25 Feb 2014 20:30:32 +0100
Subject: brcmfmac: Remove immediate sleep support from SDIO.

Immediate sleep support is an aggressive power saving option
that has not been enabled in brcmfmac and is removed to
simplify code.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 20 --------------------
 1 file changed, 20 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index cc0f1ad8b42c..04f5e32cfb48 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -304,7 +304,6 @@ struct rte_console {
 /* Flags for SDH calls */
 #define F2SYNC	(SDIO_REQ_4BYTE | SDIO_REQ_FIXED)
 
-#define BRCMF_IDLE_IMMEDIATE	(-1)	/* Enter idle immediately */
 #define BRCMF_IDLE_ACTIVE	0	/* Do not request any SD clock change
 					 * when idle
 					 */
@@ -2662,16 +2661,6 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus)
 		    data_ok(bus)) || PKT_AVAILABLE()) {
 		atomic_inc(&bus->dpc_tskcnt);
 	}
-
-	/* If we're done for now, turn off clock request. */
-	if ((bus->clkstate != CLK_PENDING)
-	    && bus->idletime == BRCMF_IDLE_IMMEDIATE) {
-		bus->activity = false;
-		brcmf_dbg(SDIO, "idle state\n");
-		sdio_claim_host(bus->sdiodev->func[1]);
-		brcmf_sdio_bus_sleep(bus, true, false);
-		sdio_release_host(bus->sdiodev->func[1]);
-	}
 }
 
 static struct pktq *brcmf_sdio_bus_gettxq(struct device *dev)
@@ -2948,15 +2937,6 @@ brcmf_sdio_bus_txctl(struct device *dev, unsigned char *msg, uint msglen)
 		} while (ret < 0 && retries++ < TXRETRIES);
 	}
 
-	if ((bus->idletime == BRCMF_IDLE_IMMEDIATE) &&
-	    atomic_read(&bus->dpc_tskcnt) == 0) {
-		bus->activity = false;
-		sdio_claim_host(bus->sdiodev->func[1]);
-		brcmf_dbg(INFO, "idle\n");
-		brcmf_sdio_clkctl(bus, CLK_NONE, true);
-		sdio_release_host(bus->sdiodev->func[1]);
-	}
-
 	if (ret)
 		bus->sdcnt.tx_ctlerrs++;
 	else
-- 
cgit v1.2.2


From b6a8cf2cd8f1d17c850db0f591e3d349d417b40a Mon Sep 17 00:00:00 2001
From: Hante Meuleman <meuleman@broadcom.com>
Date: Tue, 25 Feb 2014 20:30:33 +0100
Subject: brcmfmac: Small cleanup of redundant code.

In time some of the code got redundant, without being noticed.
This patch does not change any functionality, just removes
redundant code.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 18 ++++++------------
 1 file changed, 6 insertions(+), 12 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index 04f5e32cfb48..ac61419dc998 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -770,8 +770,6 @@ brcmf_sdio_kso_control(struct brcmf_sdio *bus, bool on)
 	return err;
 }
 
-#define PKT_AVAILABLE()		(intstatus & I_HMB_FRAME_IND)
-
 #define HOSTINTMASK		(I_HMB_SW_MASK | I_CHIPACTIVE)
 
 /* Turn backplane clock on or off */
@@ -870,7 +868,6 @@ static int brcmf_sdio_htclk(struct brcmf_sdio *bus, bool on, bool pendok)
 		}
 #endif				/* defined (DEBUG) */
 
-		bus->activity = true;
 	} else {
 		clkreq = 0;
 
@@ -2341,7 +2338,7 @@ static uint brcmf_sdio_sendfromq(struct brcmf_sdio *bus, uint maxframes)
 		cnt += i;
 
 		/* In poll mode, need to check for other events */
-		if (!bus->intr && cnt) {
+		if (!bus->intr) {
 			/* Check device status, signal pending interrupt */
 			sdio_claim_host(bus->sdiodev->func[1]);
 			ret = r_sdreg32(bus, &intstatus,
@@ -2485,9 +2482,8 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus)
 {
 	u32 newstatus = 0;
 	unsigned long intstatus;
-	uint rxlimit = bus->rxbound;	/* Rx frames to read before resched */
 	uint txlimit = bus->txbound;	/* Tx frames to send before resched */
-	uint framecnt = 0;	/* Temporary counter of tx/rx frames */
+	uint framecnt;			/* Temporary counter of tx/rx frames */
 	int err = 0, n;
 
 	brcmf_dbg(TRACE, "Enter\n");
@@ -2585,11 +2581,10 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus)
 		intstatus &= ~I_HMB_FRAME_IND;
 
 	/* On frame indication, read available frames */
-	if (PKT_AVAILABLE() && bus->clkstate == CLK_AVAIL) {
-		framecnt = brcmf_sdio_readframes(bus, rxlimit);
+	if ((intstatus & I_HMB_FRAME_IND) && (bus->clkstate == CLK_AVAIL)) {
+		brcmf_sdio_readframes(bus, bus->rxbound);
 		if (!bus->rxpending)
 			intstatus &= ~I_HMB_FRAME_IND;
-		rxlimit -= min(framecnt, rxlimit);
 	}
 
 	/* Keep still-pending events for next scheduling */
@@ -2647,8 +2642,7 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus)
 		 && data_ok(bus)) {
 		framecnt = bus->rxpending ? min(txlimit, bus->txminmax) :
 					    txlimit;
-		framecnt = brcmf_sdio_sendfromq(bus, framecnt);
-		txlimit -= framecnt;
+		brcmf_sdio_sendfromq(bus, framecnt);
 	}
 
 	if (!brcmf_bus_ready(bus->sdiodev->bus_if) || (err != 0)) {
@@ -2658,7 +2652,7 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus)
 		   atomic_read(&bus->ipend) > 0 ||
 		   (!atomic_read(&bus->fcstate) &&
 		    brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol) &&
-		    data_ok(bus)) || PKT_AVAILABLE()) {
+		    data_ok(bus))) {
 		atomic_inc(&bus->dpc_tskcnt);
 	}
 }
-- 
cgit v1.2.2


From 8acbea614a75bc2221a84f222dc32be0877861ce Mon Sep 17 00:00:00 2001
From: Paul Stewart <pstew@chromium.org>
Date: Tue, 25 Feb 2014 16:31:37 -0800
Subject: mwifiex: Track BA sequence number reset

Some stations reset the sequence number for traffic-ids (TIDs)
as they initiate a block-ACK session.  In order to detect such
behavior, mwifiex must note the starting sequence number given
during the ADDBA request.  If the first received sequence number
after the ADDBA falls outside the receive window for this TID but
after the the ADDBA starting sequence number, we can assume that
this AP has reset its sequence number during the ADDBA.  In this
case we must adjust the input window backward to incorporate this
received sequence number instead of ignoring it.  Otherwise, we
could fail to successfully retrieve an arbitrarily large number
of downstream frames at the beginning of the block-ACK session.

Signed-off-by: Paul Stewart <pstew@chromium.org>
Acked-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/11n_rxreorder.c | 27 +++++++++++++++++++++------
 drivers/net/wireless/mwifiex/11n_rxreorder.h |  3 ++-
 drivers/net/wireless/mwifiex/main.h          |  1 +
 3 files changed, 24 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/11n_rxreorder.c b/drivers/net/wireless/mwifiex/11n_rxreorder.c
index eb17282b364f..35329cfc9a9b 100644
--- a/drivers/net/wireless/mwifiex/11n_rxreorder.c
+++ b/drivers/net/wireless/mwifiex/11n_rxreorder.c
@@ -279,6 +279,8 @@ mwifiex_11n_create_rx_reorder_tbl(struct mwifiex_private *priv, u8 *ta,
 	new_node->tid = tid;
 	memcpy(new_node->ta, ta, ETH_ALEN);
 	new_node->start_win = seq_num;
+	new_node->init_win = seq_num;
+	new_node->flags = 0;
 
 	if (mwifiex_queuing_ra_based(priv)) {
 		dev_dbg(priv->adapter->dev,
@@ -298,11 +300,12 @@ mwifiex_11n_create_rx_reorder_tbl(struct mwifiex_private *priv, u8 *ta,
 	}
 
 	if (last_seq != MWIFIEX_DEF_11N_RX_SEQ_NUM &&
-	    last_seq >= new_node->start_win)
+	    last_seq >= new_node->start_win) {
 		new_node->start_win = last_seq + 1;
+		new_node->flags |= RXREOR_INIT_WINDOW_SHIFT;
+	}
 
 	new_node->win_size = win_size;
-	new_node->flags = 0;
 
 	new_node->rx_reorder_ptr = kzalloc(sizeof(void *) * win_size,
 					GFP_KERNEL);
@@ -452,6 +455,7 @@ int mwifiex_11n_rx_reorder_pkt(struct mwifiex_private *priv,
 	struct mwifiex_rx_reorder_tbl *tbl;
 	int start_win, end_win, win_size;
 	u16 pkt_index;
+	bool init_window_shift = false;
 
 	tbl = mwifiex_11n_get_rx_reorder_tbl(priv, tid, ta);
 	if (!tbl) {
@@ -466,18 +470,29 @@ int mwifiex_11n_rx_reorder_pkt(struct mwifiex_private *priv,
 	start_win = tbl->start_win;
 	win_size = tbl->win_size;
 	end_win = ((start_win + win_size) - 1) & (MAX_TID_VALUE - 1);
+	if (tbl->flags & RXREOR_INIT_WINDOW_SHIFT) {
+		init_window_shift = true;
+		tbl->flags &= ~RXREOR_INIT_WINDOW_SHIFT;
+	}
 	mod_timer(&tbl->timer_context.timer,
 		  jiffies + msecs_to_jiffies(MIN_FLUSH_TIMER_MS * win_size));
 
-	/*
-	 * If seq_num is less then starting win then ignore and drop the
-	 * packet
-	 */
 	if (tbl->flags & RXREOR_FORCE_NO_DROP) {
 		dev_dbg(priv->adapter->dev,
 			"RXREOR_FORCE_NO_DROP when HS is activated\n");
 		tbl->flags &= ~RXREOR_FORCE_NO_DROP;
+	} else if (init_window_shift && seq_num < start_win &&
+		   seq_num >= tbl->init_win) {
+		dev_dbg(priv->adapter->dev,
+			"Sender TID sequence number reset %d->%d for SSN %d\n",
+			start_win, seq_num, tbl->init_win);
+		tbl->start_win = start_win = seq_num;
+		end_win = ((start_win + win_size) - 1) & (MAX_TID_VALUE - 1);
 	} else {
+		/*
+		 * If seq_num is less then starting win then ignore and drop
+		 * the packet
+		 */
 		if ((start_win + TWOPOW11) > (MAX_TID_VALUE - 1)) {
 			if (seq_num >= ((start_win + TWOPOW11) &
 					(MAX_TID_VALUE - 1)) &&
diff --git a/drivers/net/wireless/mwifiex/11n_rxreorder.h b/drivers/net/wireless/mwifiex/11n_rxreorder.h
index 4064041ac852..0fc76e4a60f8 100644
--- a/drivers/net/wireless/mwifiex/11n_rxreorder.h
+++ b/drivers/net/wireless/mwifiex/11n_rxreorder.h
@@ -42,7 +42,8 @@
 #define BA_SETUP_PACKET_OFFSET		16
 
 enum mwifiex_rxreor_flags {
-	RXREOR_FORCE_NO_DROP	= 1<<0,
+	RXREOR_FORCE_NO_DROP		= 1<<0,
+	RXREOR_INIT_WINDOW_SHIFT	= 1<<1,
 };
 
 static inline void mwifiex_reset_11n_rx_seq_num(struct mwifiex_private *priv)
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index 407f8eada720..cb1148f0de69 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -575,6 +575,7 @@ struct mwifiex_rx_reorder_tbl {
 	struct list_head list;
 	int tid;
 	u8 ta[ETH_ALEN];
+	int init_win;
 	int start_win;
 	int win_size;
 	void **rx_reorder_ptr;
-- 
cgit v1.2.2


From 7fbdaa2a27583664ff700843269bc3ca14e4e1b5 Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@rempel-privat.de>
Date: Wed, 26 Feb 2014 10:03:43 +0100
Subject: ath9k: remove unused listen_interval and sleepduration.

this variable never changed.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ath9k.h  |  1 -
 drivers/net/wireless/ath/ath9k/beacon.c | 21 +++++++--------------
 2 files changed, 7 insertions(+), 15 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index e703ddad7ecf..f995c374a9b4 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -410,7 +410,6 @@ void ath9k_calculate_iter_data(struct ieee80211_hw *hw,
 
 struct ath_beacon_config {
 	int beacon_interval;
-	u16 listen_interval;
 	u16 dtim_period;
 	u16 bmiss_timeout;
 	u8 dtim_count;
diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c
index 6569528753af..02eb4f10332b 100644
--- a/drivers/net/wireless/ath/ath9k/beacon.c
+++ b/drivers/net/wireless/ath/ath9k/beacon.c
@@ -519,7 +519,7 @@ static void ath9k_beacon_config_sta(struct ath_softc *sc,
 	struct ath_hw *ah = sc->sc_ah;
 	struct ath_common *common = ath9k_hw_common(ah);
 	struct ath9k_beacon_state bs;
-	int dtim_intval, sleepduration;
+	int dtim_intval;
 	u32 nexttbtt = 0, intval;
 	u64 tsf;
 
@@ -538,7 +538,6 @@ static void ath9k_beacon_config_sta(struct ath_softc *sc,
 	 * last beacon we received (which may be none).
 	 */
 	dtim_intval = intval * conf->dtim_period;
-	sleepduration = conf->listen_interval * intval;
 
 	/*
 	 * Pull nexttbtt forward to reflect the current
@@ -560,16 +559,11 @@ static void ath9k_beacon_config_sta(struct ath_softc *sc,
 	 * need calculate based	on the beacon interval.  Note that we clamp the
 	 * result to at most 15 beacons.
 	 */
-	if (sleepduration > intval) {
-		bs.bs_bmissthreshold = conf->listen_interval *
-			ATH_DEFAULT_BMISS_LIMIT / 2;
-	} else {
-		bs.bs_bmissthreshold = DIV_ROUND_UP(conf->bmiss_timeout, intval);
-		if (bs.bs_bmissthreshold > 15)
-			bs.bs_bmissthreshold = 15;
-		else if (bs.bs_bmissthreshold <= 0)
-			bs.bs_bmissthreshold = 1;
-	}
+	bs.bs_bmissthreshold = DIV_ROUND_UP(conf->bmiss_timeout, intval);
+	if (bs.bs_bmissthreshold > 15)
+		bs.bs_bmissthreshold = 15;
+	else if (bs.bs_bmissthreshold <= 0)
+		bs.bs_bmissthreshold = 1;
 
 	/*
 	 * Calculate sleep duration. The configuration is given in ms.
@@ -581,7 +575,7 @@ static void ath9k_beacon_config_sta(struct ath_softc *sc,
 	 */
 
 	bs.bs_sleepduration = TU_TO_USEC(roundup(IEEE80211_MS_TO_TU(100),
-						 sleepduration));
+						 intval));
 	if (bs.bs_sleepduration > bs.bs_dtimperiod)
 		bs.bs_sleepduration = bs.bs_dtimperiod;
 
@@ -677,7 +671,6 @@ static void ath9k_cache_beacon_config(struct ath_softc *sc,
 
 	cur_conf->beacon_interval = bss_conf->beacon_int;
 	cur_conf->dtim_period = bss_conf->dtim_period;
-	cur_conf->listen_interval = 1;
 	cur_conf->dtim_count = 1;
 	cur_conf->ibss_creator = bss_conf->ibss_creator;
 	cur_conf->bmiss_timeout =
-- 
cgit v1.2.2


From 527492eefcee253e33bbe79bcfef6bedf9935492 Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@rempel-privat.de>
Date: Wed, 26 Feb 2014 10:03:44 +0100
Subject: ath9k_htc: remove unused variable sleepduration

sleepduration is always = intval.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/htc_drv_beacon.c | 22 +++++++---------------
 1 file changed, 7 insertions(+), 15 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
index 8b5757734596..a00ddb9e737e 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
@@ -69,7 +69,7 @@ static void ath9k_htc_beacon_config_sta(struct ath9k_htc_priv *priv,
 	struct ath_common *common = ath9k_hw_common(priv->ah);
 	struct ath9k_beacon_state bs;
 	enum ath9k_int imask = 0;
-	int dtimperiod, dtimcount, sleepduration;
+	int dtimperiod, dtimcount;
 	int bmiss_timeout;
 	u32 nexttbtt = 0, intval, tsftu;
 	__be32 htc_imask = 0;
@@ -94,10 +94,6 @@ static void ath9k_htc_beacon_config_sta(struct ath9k_htc_priv *priv,
 	if (dtimcount >= dtimperiod)	/* NB: sanity check */
 		dtimcount = 0;
 
-	sleepduration = intval;
-	if (sleepduration <= 0)
-		sleepduration = intval;
-
 	/*
 	 * Pull nexttbtt forward to reflect the current
 	 * TSF and calculate dtim state for the result.
@@ -128,15 +124,11 @@ static void ath9k_htc_beacon_config_sta(struct ath9k_htc_priv *priv,
 	 * need calculate based	on the beacon interval.  Note that we clamp the
 	 * result to at most 15 beacons.
 	 */
-	if (sleepduration > intval) {
-		bs.bs_bmissthreshold = ATH_DEFAULT_BMISS_LIMIT / 2;
-	} else {
-		bs.bs_bmissthreshold = DIV_ROUND_UP(bmiss_timeout, intval);
-		if (bs.bs_bmissthreshold > 15)
-			bs.bs_bmissthreshold = 15;
-		else if (bs.bs_bmissthreshold <= 0)
-			bs.bs_bmissthreshold = 1;
-	}
+	bs.bs_bmissthreshold = DIV_ROUND_UP(bmiss_timeout, intval);
+	if (bs.bs_bmissthreshold > 15)
+		bs.bs_bmissthreshold = 15;
+	else if (bs.bs_bmissthreshold <= 0)
+		bs.bs_bmissthreshold = 1;
 
 	/*
 	 * Calculate sleep duration. The configuration is given in ms.
@@ -148,7 +140,7 @@ static void ath9k_htc_beacon_config_sta(struct ath9k_htc_priv *priv,
 	 */
 
 	bs.bs_sleepduration = TU_TO_USEC(roundup(IEEE80211_MS_TO_TU(100),
-						 sleepduration));
+						 intval));
 	if (bs.bs_sleepduration > bs.bs_dtimperiod)
 		bs.bs_sleepduration = bs.bs_dtimperiod;
 
-- 
cgit v1.2.2


From 2259ba38a5c545bb54ee0fd9b07cb1828a2849d6 Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@rempel-privat.de>
Date: Wed, 26 Feb 2014 10:04:44 +0100
Subject: ath9k_htc: add function ath9k_regwrite_multi

... to remove duplicate code

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/htc_drv_init.c | 53 ++++++++++++---------------
 1 file changed, 23 insertions(+), 30 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
index a8f30dc448bb..b22fb64403d9 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
@@ -256,6 +256,25 @@ static void ath9k_multi_regread(void *hw_priv, u32 *addr,
        }
 }
 
+static void ath9k_regwrite_multi(struct ath_common *common)
+{
+	struct ath9k_htc_priv *priv = (struct ath9k_htc_priv *) common->priv;
+	u32 rsp_status;
+	int r;
+
+	r = ath9k_wmi_cmd(priv->wmi, WMI_REG_WRITE_CMDID,
+			  (u8 *) &priv->wmi->multi_write,
+			  sizeof(struct register_write) * priv->wmi->multi_write_idx,
+			  (u8 *) &rsp_status, sizeof(rsp_status),
+			  100);
+	if (unlikely(r)) {
+		ath_dbg(common, WMI,
+			"REGISTER WRITE FAILED, multi len: %d\n",
+			priv->wmi->multi_write_idx);
+	}
+	priv->wmi->multi_write_idx = 0;
+}
+
 static void ath9k_regwrite_single(void *hw_priv, u32 val, u32 reg_offset)
 {
 	struct ath_hw *ah = (struct ath_hw *) hw_priv;
@@ -282,8 +301,6 @@ static void ath9k_regwrite_buffer(void *hw_priv, u32 val, u32 reg_offset)
 	struct ath_hw *ah = (struct ath_hw *) hw_priv;
 	struct ath_common *common = ath9k_hw_common(ah);
 	struct ath9k_htc_priv *priv = (struct ath9k_htc_priv *) common->priv;
-	u32 rsp_status;
-	int r;
 
 	mutex_lock(&priv->wmi->multi_write_mutex);
 
@@ -296,19 +313,8 @@ static void ath9k_regwrite_buffer(void *hw_priv, u32 val, u32 reg_offset)
 	priv->wmi->multi_write_idx++;
 
 	/* If the buffer is full, send it out. */
-	if (priv->wmi->multi_write_idx == MAX_CMD_NUMBER) {
-		r = ath9k_wmi_cmd(priv->wmi, WMI_REG_WRITE_CMDID,
-			  (u8 *) &priv->wmi->multi_write,
-			  sizeof(struct register_write) * priv->wmi->multi_write_idx,
-			  (u8 *) &rsp_status, sizeof(rsp_status),
-			  100);
-		if (unlikely(r)) {
-			ath_dbg(common, WMI,
-				"REGISTER WRITE FAILED, multi len: %d\n",
-				priv->wmi->multi_write_idx);
-		}
-		priv->wmi->multi_write_idx = 0;
-	}
+	if (priv->wmi->multi_write_idx == MAX_CMD_NUMBER)
+		ath9k_regwrite_multi(common);
 
 	mutex_unlock(&priv->wmi->multi_write_mutex);
 }
@@ -339,26 +345,13 @@ static void ath9k_regwrite_flush(void *hw_priv)
 	struct ath_hw *ah = (struct ath_hw *) hw_priv;
 	struct ath_common *common = ath9k_hw_common(ah);
 	struct ath9k_htc_priv *priv = (struct ath9k_htc_priv *) common->priv;
-	u32 rsp_status;
-	int r;
 
 	atomic_dec(&priv->wmi->mwrite_cnt);
 
 	mutex_lock(&priv->wmi->multi_write_mutex);
 
-	if (priv->wmi->multi_write_idx) {
-		r = ath9k_wmi_cmd(priv->wmi, WMI_REG_WRITE_CMDID,
-			  (u8 *) &priv->wmi->multi_write,
-			  sizeof(struct register_write) * priv->wmi->multi_write_idx,
-			  (u8 *) &rsp_status, sizeof(rsp_status),
-			  100);
-		if (unlikely(r)) {
-			ath_dbg(common, WMI,
-				"REGISTER WRITE FAILED, multi len: %d\n",
-				priv->wmi->multi_write_idx);
-		}
-		priv->wmi->multi_write_idx = 0;
-	}
+	if (priv->wmi->multi_write_idx)
+		ath9k_regwrite_multi(common);
 
 	mutex_unlock(&priv->wmi->multi_write_mutex);
 }
-- 
cgit v1.2.2


From c98db0bec72ac7ef127119c1ed962d6f56802b12 Mon Sep 17 00:00:00 2001
From: Hante Meuleman <meuleman@broadcom.com>
Date: Wed, 26 Feb 2014 13:32:32 +0100
Subject: brcmfmac: Use atomic functions for intstatus update.

The intstatus in sdio code can be updated from different
threads. To protect intstatus access, atomic functions are
used. The loop was replaced using atomic_set_mask().

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 20 ++++++--------------
 1 file changed, 6 insertions(+), 14 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index ac61419dc998..0ccb7affeb04 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -2449,7 +2449,7 @@ static int brcmf_sdio_intr_rstatus(struct brcmf_sdio *bus)
 	struct brcmf_core *buscore;
 	u32 addr;
 	unsigned long val;
-	int n, ret;
+	int ret;
 
 	buscore = brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV);
 	addr = buscore->base + offsetof(struct sdpcmd_regs, intstatus);
@@ -2457,7 +2457,7 @@ static int brcmf_sdio_intr_rstatus(struct brcmf_sdio *bus)
 	val = brcmf_sdiod_regrl(bus->sdiodev, addr, &ret);
 	bus->sdcnt.f1regdata++;
 	if (ret != 0)
-		val = 0;
+		return ret;
 
 	val &= bus->hostintmask;
 	atomic_set(&bus->fcstate, !!(val & I_HMB_FC_STATE));
@@ -2466,13 +2466,7 @@ static int brcmf_sdio_intr_rstatus(struct brcmf_sdio *bus)
 	if (val) {
 		brcmf_sdiod_regwl(bus->sdiodev, addr, val, &ret);
 		bus->sdcnt.f1regdata++;
-	}
-
-	if (ret) {
-		atomic_set(&bus->intstatus, 0);
-	} else if (val) {
-		for_each_set_bit(n, &val, 32)
-			set_bit(n, (unsigned long *)&bus->intstatus.counter);
+		atomic_set_mask(val, &bus->intstatus);
 	}
 
 	return ret;
@@ -2484,7 +2478,7 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus)
 	unsigned long intstatus;
 	uint txlimit = bus->txbound;	/* Tx frames to send before resched */
 	uint framecnt;			/* Temporary counter of tx/rx frames */
-	int err = 0, n;
+	int err = 0;
 
 	brcmf_dbg(TRACE, "Enter\n");
 
@@ -2588,10 +2582,8 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus)
 	}
 
 	/* Keep still-pending events for next scheduling */
-	if (intstatus) {
-		for_each_set_bit(n, &intstatus, 32)
-			set_bit(n, (unsigned long *)&bus->intstatus.counter);
-	}
+	if (intstatus)
+		atomic_set_mask(intstatus, &bus->intstatus);
 
 	brcmf_sdio_clrintr(bus);
 
-- 
cgit v1.2.2


From 1647f12f1b511c2629b9b8d23061aa54ad8a9795 Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Thu, 27 Feb 2014 16:20:40 +0200
Subject: wil6210: Tx management frame

Implement management frame passing. In order to receive frame on the other
side, remain_on_channel() should be implemented as well

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wil6210/cfg80211.c | 72 +++++++++++++++++++++++++++++
 drivers/net/wireless/ath/wil6210/wil6210.h  |  1 +
 drivers/net/wireless/ath/wil6210/wmi.c      | 32 +++++++++++++
 3 files changed, 105 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index 5b340769d5bb..204c7c82b1b5 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -352,6 +352,40 @@ static int wil_cfg80211_disconnect(struct wiphy *wiphy,
 	return rc;
 }
 
+static int wil_cfg80211_mgmt_tx(struct wiphy *wiphy,
+				struct wireless_dev *wdev,
+				struct cfg80211_mgmt_tx_params *params,
+				u64 *cookie)
+{
+	const u8 *buf = params->buf;
+	size_t len = params->len;
+	struct wil6210_priv *wil = wiphy_to_wil(wiphy);
+	int rc;
+	struct ieee80211_mgmt *mgmt_frame = (void *)buf;
+	struct wmi_sw_tx_req_cmd *cmd;
+	struct {
+		struct wil6210_mbox_hdr_wmi wmi;
+		struct wmi_sw_tx_complete_event evt;
+	} __packed evt;
+
+	cmd = kmalloc(sizeof(*cmd) + len, GFP_KERNEL);
+	if (!cmd)
+		return -ENOMEM;
+
+	memcpy(cmd->dst_mac, mgmt_frame->da, WMI_MAC_LEN);
+	cmd->len = cpu_to_le16(len);
+	memcpy(cmd->payload, buf, len);
+
+	rc = wmi_call(wil, WMI_SW_TX_REQ_CMDID, cmd, sizeof(*cmd) + len,
+		      WMI_SW_TX_COMPLETE_EVENTID, &evt, sizeof(evt), 2000);
+	if (rc == 0)
+		rc = evt.evt.status;
+
+	kfree(cmd);
+
+	return rc;
+}
+
 static int wil_cfg80211_set_channel(struct wiphy *wiphy,
 				    struct cfg80211_chan_def *chandef)
 {
@@ -402,6 +436,41 @@ static int wil_cfg80211_set_default_key(struct wiphy *wiphy,
 	return 0;
 }
 
+static int wil_remain_on_channel(struct wiphy *wiphy,
+				 struct wireless_dev *wdev,
+				 struct ieee80211_channel *chan,
+				 unsigned int duration,
+				 u64 *cookie)
+{
+	struct wil6210_priv *wil = wiphy_to_wil(wiphy);
+	int rc;
+
+	/* TODO: handle duration */
+	wil_info(wil, "%s(%d, %d ms)\n", __func__, chan->center_freq, duration);
+
+	rc = wmi_set_channel(wil, chan->hw_value);
+	if (rc)
+		return rc;
+
+	rc = wmi_rxon(wil, true);
+
+	return rc;
+}
+
+static int wil_cancel_remain_on_channel(struct wiphy *wiphy,
+					struct wireless_dev *wdev,
+					u64 cookie)
+{
+	struct wil6210_priv *wil = wiphy_to_wil(wiphy);
+	int rc;
+
+	wil_info(wil, "%s()\n", __func__);
+
+	rc = wmi_rxon(wil, false);
+
+	return rc;
+}
+
 static int wil_fix_bcon(struct wil6210_priv *wil,
 			struct cfg80211_beacon_data *bcon)
 {
@@ -510,6 +579,9 @@ static struct cfg80211_ops wil_cfg80211_ops = {
 	.disconnect = wil_cfg80211_disconnect,
 	.change_virtual_intf = wil_cfg80211_change_iface,
 	.get_station = wil_cfg80211_get_station,
+	.remain_on_channel = wil_remain_on_channel,
+	.cancel_remain_on_channel = wil_cancel_remain_on_channel,
+	.mgmt_tx = wil_cfg80211_mgmt_tx,
 	.set_monitor_channel = wil_cfg80211_set_channel,
 	.add_key = wil_cfg80211_add_key,
 	.del_key = wil_cfg80211_del_key,
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index 1f91eaf95bbe..0d7fba4f09e2 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -357,6 +357,7 @@ int wmi_echo(struct wil6210_priv *wil);
 int wmi_set_ie(struct wil6210_priv *wil, u8 type, u16 ie_len, const void *ie);
 int wmi_rx_chain_add(struct wil6210_priv *wil, struct vring *vring);
 int wmi_p2p_cfg(struct wil6210_priv *wil, int channel);
+int wmi_rxon(struct wil6210_priv *wil, bool on);
 int wmi_get_temperature(struct wil6210_priv *wil, u32 *t_m, u32 *t_r);
 
 int wil6210_init_irq(struct wil6210_priv *wil, int irq);
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index 063963ee422a..d65da5590c5f 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -893,6 +893,38 @@ int wmi_set_ie(struct wil6210_priv *wil, u8 type, u16 ie_len, const void *ie)
 	return rc;
 }
 
+/**
+ * wmi_rxon - turn radio on/off
+ * @on:		turn on if true, off otherwise
+ *
+ * Only switch radio. Channel should be set separately.
+ * No timeout for rxon - radio turned on forever unless some other call
+ * turns it off
+ */
+int wmi_rxon(struct wil6210_priv *wil, bool on)
+{
+	int rc;
+	struct {
+		struct wil6210_mbox_hdr_wmi wmi;
+		struct wmi_listen_started_event evt;
+	} __packed reply;
+
+	wil_info(wil, "%s(%s)\n", __func__, on ? "on" : "off");
+
+	if (on) {
+		rc = wmi_call(wil, WMI_START_LISTEN_CMDID, NULL, 0,
+			      WMI_LISTEN_STARTED_EVENTID,
+			      &reply, sizeof(reply), 100);
+		if ((rc == 0) && (reply.evt.status != WMI_FW_STATUS_SUCCESS))
+			rc = -EINVAL;
+	} else {
+		rc = wmi_call(wil, WMI_DISCOVERY_STOP_CMDID, NULL, 0,
+			      WMI_DISCOVERY_STOPPED_EVENTID, NULL, 0, 20);
+	}
+
+	return rc;
+}
+
 int wmi_rx_chain_add(struct wil6210_priv *wil, struct vring *vring)
 {
 	struct wireless_dev *wdev = wil->wdev;
-- 
cgit v1.2.2


From 3a85543e9f9f6821d27d33d436f2bad96e5166df Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Thu, 27 Feb 2014 16:20:41 +0200
Subject: wil6210: [DEBUG] allow to query Rx and all Tx VRING descriptors

Expand debug capabilities to query all Tx/Rx descriptors. Usefull to analyse
various hardware/software stall situations. Printed is whole descriptor content
and the frame itself.

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wil6210/debugfs.c | 40 ++++++++++++++++++++++++------
 1 file changed, 32 insertions(+), 8 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/wil6210/debugfs.c b/drivers/net/wireless/ath/wil6210/debugfs.c
index 1caa31992a7e..74bb427ce303 100644
--- a/drivers/net/wireless/ath/wil6210/debugfs.c
+++ b/drivers/net/wireless/ath/wil6210/debugfs.c
@@ -26,6 +26,8 @@
 /* Nasty hack. Better have per device instances */
 static u32 mem_addr;
 static u32 dbg_txdesc_index;
+static u32 dbg_vring_index; /* 25 for Rx, 0..24 for Tx */
+#define WIL_DBG_VRING_INDEX_RX (WIL6210_MAX_TX_RINGS + 1)
 
 static void wil_print_vring(struct seq_file *s, struct wil6210_priv *wil,
 			    const char *name, struct vring *vring)
@@ -390,25 +392,39 @@ static const struct file_operations fops_reset = {
 	.write = wil_write_file_reset,
 	.open  = simple_open,
 };
-/*---------Tx descriptor------------*/
 
+/*---------Tx/Rx descriptor------------*/
 static int wil_txdesc_debugfs_show(struct seq_file *s, void *data)
 {
 	struct wil6210_priv *wil = s->private;
-	struct vring *vring = &(wil->vring_tx[0]);
+	struct vring *vring;
+	if (dbg_vring_index <= WIL6210_MAX_TX_RINGS)
+		vring = &(wil->vring_tx[dbg_vring_index]);
+	else
+		vring = &wil->vring_rx;
 
 	if (!vring->va) {
-		seq_printf(s, "No Tx VRING\n");
+		if (dbg_vring_index <= WIL6210_MAX_TX_RINGS)
+			seq_printf(s, "No Tx[%2d] VRING\n", dbg_vring_index);
+		else
+			seq_puts(s, "No Rx VRING\n");
 		return 0;
 	}
 
 	if (dbg_txdesc_index < vring->size) {
+		/* use struct vring_tx_desc for Rx as well,
+		 * only field used, .dma.length, is the same
+		 */
 		volatile struct vring_tx_desc *d =
 				&(vring->va[dbg_txdesc_index].tx);
 		volatile u32 *u = (volatile u32 *)d;
 		struct sk_buff *skb = vring->ctx[dbg_txdesc_index].skb;
 
-		seq_printf(s, "Tx[%3d] = {\n", dbg_txdesc_index);
+		if (dbg_vring_index <= WIL6210_MAX_TX_RINGS)
+			seq_printf(s, "Tx[%2d][%3d] = {\n", dbg_vring_index,
+				   dbg_txdesc_index);
+		else
+			seq_printf(s, "Rx[%3d] = {\n", dbg_txdesc_index);
 		seq_printf(s, "  MAC = 0x%08x 0x%08x 0x%08x 0x%08x\n",
 			   u[0], u[1], u[2], u[3]);
 		seq_printf(s, "  DMA = 0x%08x 0x%08x 0x%08x 0x%08x\n",
@@ -439,8 +455,13 @@ static int wil_txdesc_debugfs_show(struct seq_file *s, void *data)
 		}
 		seq_printf(s, "}\n");
 	} else {
-		seq_printf(s, "TxDesc index (%d) >= size (%d)\n",
-			   dbg_txdesc_index, vring->size);
+		if (dbg_vring_index <= WIL6210_MAX_TX_RINGS)
+			seq_printf(s, "[%2d] TxDesc index (%d) >= size (%d)\n",
+				   dbg_vring_index, dbg_txdesc_index,
+				   vring->size);
+		else
+			seq_printf(s, "RxDesc index (%d) >= size (%d)\n",
+				   dbg_txdesc_index, vring->size);
 	}
 
 	return 0;
@@ -581,9 +602,12 @@ int wil6210_debugfs_init(struct wil6210_priv *wil)
 
 	debugfs_create_file("mbox", S_IRUGO, dbg, wil, &fops_mbox);
 	debugfs_create_file("vrings", S_IRUGO, dbg, wil, &fops_vring);
-	debugfs_create_file("txdesc", S_IRUGO, dbg, wil, &fops_txdesc);
-	debugfs_create_u32("txdesc_index", S_IRUGO | S_IWUSR, dbg,
+	debugfs_create_file("desc", S_IRUGO, dbg, wil, &fops_txdesc);
+	debugfs_create_u32("desc_index", S_IRUGO | S_IWUSR, dbg,
 			   &dbg_txdesc_index);
+	debugfs_create_u32("vring_index", S_IRUGO | S_IWUSR, dbg,
+			   &dbg_vring_index);
+
 	debugfs_create_file("bf", S_IRUGO, dbg, wil, &fops_bf);
 	debugfs_create_file("ssid", S_IRUGO | S_IWUSR, dbg, wil, &fops_ssid);
 	debugfs_create_u32("secure_pcp", S_IRUGO | S_IWUSR, dbg,
-- 
cgit v1.2.2


From 59f7c0a9577a965e279a0c15858480100f28f03d Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Thu, 27 Feb 2014 16:20:42 +0200
Subject: wil6210: [DEBUG] Improve Vring printing

Print '_' for the 'idle' descriptors - this makes vring representation more visible.
Also, for the Tx side, differentiate descriptors having associated skb's - print ones
with skb as 'H' and without as 'h'. Good to represent scattered frames.

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wil6210/debugfs.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/wil6210/debugfs.c b/drivers/net/wireless/ath/wil6210/debugfs.c
index 74bb427ce303..6fdab1a73e9e 100644
--- a/drivers/net/wireless/ath/wil6210/debugfs.c
+++ b/drivers/net/wireless/ath/wil6210/debugfs.c
@@ -30,7 +30,8 @@ static u32 dbg_vring_index; /* 25 for Rx, 0..24 for Tx */
 #define WIL_DBG_VRING_INDEX_RX (WIL6210_MAX_TX_RINGS + 1)
 
 static void wil_print_vring(struct seq_file *s, struct wil6210_priv *wil,
-			    const char *name, struct vring *vring)
+			    const char *name, struct vring *vring,
+			    char _s, char _h)
 {
 	void __iomem *x = wmi_addr(wil, vring->hwtail);
 
@@ -52,8 +53,8 @@ static void wil_print_vring(struct seq_file *s, struct wil6210_priv *wil,
 			volatile struct vring_tx_desc *d = &vring->va[i].tx;
 			if ((i % 64) == 0 && (i != 0))
 				seq_printf(s, "\n");
-			seq_printf(s, "%s", (d->dma.status & BIT(0)) ?
-					"S" : (vring->ctx[i].skb ? "H" : "h"));
+			seq_printf(s, "%c", (d->dma.status & BIT(0)) ?
+					_s : (vring->ctx[i].skb ? _h : 'h'));
 		}
 		seq_printf(s, "\n");
 	}
@@ -65,14 +66,14 @@ static int wil_vring_debugfs_show(struct seq_file *s, void *data)
 	uint i;
 	struct wil6210_priv *wil = s->private;
 
-	wil_print_vring(s, wil, "rx", &wil->vring_rx);
+	wil_print_vring(s, wil, "rx", &wil->vring_rx, 'S', '_');
 
 	for (i = 0; i < ARRAY_SIZE(wil->vring_tx); i++) {
 		struct vring *vring = &(wil->vring_tx[i]);
 		if (vring->va) {
 			char name[10];
 			snprintf(name, sizeof(name), "tx_%2d", i);
-			wil_print_vring(s, wil, name, vring);
+			wil_print_vring(s, wil, name, vring, '_', 'H');
 		}
 	}
 
-- 
cgit v1.2.2


From 3df2cd361871eb4636c8ce9cf97e6899c90c588c Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Thu, 27 Feb 2014 16:20:43 +0200
Subject: wil6210: multiple connect - initial support

Enable multiple (up to 8 - HW/FW limitation) simultaneous connections.
Each connection has its own CID (connection ID) that describes chip's
beam-forming entity. Tx Vring should refer to correct CID for frame to reach
its destination.

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wil6210/cfg80211.c |  8 +++--
 drivers/net/wireless/ath/wil6210/debugfs.c  | 45 +++++++++++++++++++++++++++
 drivers/net/wireless/ath/wil6210/main.c     | 24 ++++++++++++++-
 drivers/net/wireless/ath/wil6210/txrx.c     | 47 ++++++++++++++++++++++++-----
 drivers/net/wireless/ath/wil6210/wil6210.h  | 22 +++++++++++++-
 drivers/net/wireless/ath/wil6210/wmi.c      | 17 +++++++++--
 6 files changed, 148 insertions(+), 15 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index 204c7c82b1b5..fa713ef8dc95 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -110,15 +110,19 @@ static int wil_cfg80211_get_station(struct wiphy *wiphy,
 {
 	struct wil6210_priv *wil = wiphy_to_wil(wiphy);
 	int rc;
+
+	int cid = wil_find_cid(wil, mac);
 	struct wmi_notify_req_cmd cmd = {
-		.cid = 0,
+		.cid = cid,
 		.interval_usec = 0,
 	};
 
-	if (memcmp(mac, wil->dst_addr[0], ETH_ALEN))
+	wil_info(wil, "%s(%pM) CID %d\n", __func__, mac, cid);
+	if (cid < 0)
 		return -ENOENT;
 
 	/* WMI_NOTIFY_REQ_DONE_EVENTID handler fills wil->stats.bf_mcs */
+	/* TODO: keep stats per CID */
 	rc = wmi_call(wil, WMI_NOTIFY_REQ_CMDID, &cmd, sizeof(cmd),
 		      WMI_NOTIFY_REQ_DONE_EVENTID, NULL, 0, 20);
 	if (rc)
diff --git a/drivers/net/wireless/ath/wil6210/debugfs.c b/drivers/net/wireless/ath/wil6210/debugfs.c
index 6fdab1a73e9e..f12aa0b1e1df 100644
--- a/drivers/net/wireless/ath/wil6210/debugfs.c
+++ b/drivers/net/wireless/ath/wil6210/debugfs.c
@@ -71,8 +71,13 @@ static int wil_vring_debugfs_show(struct seq_file *s, void *data)
 	for (i = 0; i < ARRAY_SIZE(wil->vring_tx); i++) {
 		struct vring *vring = &(wil->vring_tx[i]);
 		if (vring->va) {
+			int cid = wil->vring2cid_tid[i][0];
+			int tid = wil->vring2cid_tid[i][1];
 			char name[10];
 			snprintf(name, sizeof(name), "tx_%2d", i);
+
+			seq_printf(s, "\n%pM CID %d TID %d\n",
+				   wil->sta[cid].addr, cid, tid);
 			wil_print_vring(s, wil, name, vring, '_', 'H');
 		}
 	}
@@ -592,6 +597,45 @@ static const struct file_operations fops_temp = {
 	.llseek		= seq_lseek,
 };
 
+/*---------Station matrix------------*/
+
+static int wil_sta_debugfs_show(struct seq_file *s, void *data)
+{
+	struct wil6210_priv *wil = s->private;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(wil->sta); i++) {
+		struct wil_sta_info *p = &wil->sta[i];
+		char *status = "unknown";
+		switch (p->status) {
+		case wil_sta_unused:
+			status = "unused   ";
+			break;
+		case wil_sta_conn_pending:
+			status = "pending  ";
+			break;
+		case wil_sta_connected:
+			status = "connected";
+			break;
+		}
+		seq_printf(s, "[%d] %pM %s\n", i, p->addr, status);
+	}
+
+	return 0;
+}
+
+static int wil_sta_seq_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, wil_sta_debugfs_show, inode->i_private);
+}
+
+static const struct file_operations fops_sta = {
+	.open		= wil_sta_seq_open,
+	.release	= single_release,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+};
+
 /*----------------*/
 int wil6210_debugfs_init(struct wil6210_priv *wil)
 {
@@ -603,6 +647,7 @@ int wil6210_debugfs_init(struct wil6210_priv *wil)
 
 	debugfs_create_file("mbox", S_IRUGO, dbg, wil, &fops_mbox);
 	debugfs_create_file("vrings", S_IRUGO, dbg, wil, &fops_vring);
+	debugfs_create_file("stations", S_IRUGO, dbg, wil, &fops_sta);
 	debugfs_create_file("desc", S_IRUGO, dbg, wil, &fops_txdesc);
 	debugfs_create_u32("desc_index", S_IRUGO | S_IWUSR, dbg,
 			   &dbg_txdesc_index);
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index fd30cddd5882..f68481de0ad7 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -113,14 +113,20 @@ static void wil_connect_worker(struct work_struct *work)
 
 	rc = wil_vring_init_tx(wil, 0, WIL6210_TX_RING_SIZE, cid, 0);
 	wil->pending_connect_cid = -1;
-	if (rc == 0)
+	if (rc == 0) {
+		wil->sta[cid].status = wil_sta_connected;
 		wil_link_on(wil);
+	} else {
+		wil->sta[cid].status = wil_sta_unused;
+	}
 }
 
 int wil_priv_init(struct wil6210_priv *wil)
 {
 	wil_dbg_misc(wil, "%s()\n", __func__);
 
+	memset(wil->sta, 0, sizeof(wil->sta));
+
 	mutex_init(&wil->mutex);
 	mutex_init(&wil->wmi_mutex);
 
@@ -370,3 +376,19 @@ int wil_down(struct wil6210_priv *wil)
 
 	return rc;
 }
+
+int wil_find_cid(struct wil6210_priv *wil, const u8 *mac)
+{
+	int i;
+	int rc = -ENOENT;
+
+	for (i = 0; i < ARRAY_SIZE(wil->sta); i++) {
+		if ((wil->sta[i].status != wil_sta_unused) &&
+		    (0 == memcmp(wil->sta[i].addr, mac, ETH_ALEN))) {
+			rc = i;
+			break;
+		}
+	}
+
+	return rc;
+}
diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index 0b0975d88b43..eb60023fa217 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -613,6 +613,9 @@ int wil_vring_init_tx(struct wil6210_priv *wil, int id, int size,
 	}
 	vring->hwtail = le32_to_cpu(reply.cmd.tx_vring_tail_ptr);
 
+	wil->vring2cid_tid[id][0] = cid;
+	wil->vring2cid_tid[id][1] = tid;
+
 	return 0;
  out_free:
 	wil_vring_free(wil, vring, 1);
@@ -634,10 +637,27 @@ void wil_vring_fini_tx(struct wil6210_priv *wil, int id)
 static struct vring *wil_find_tx_vring(struct wil6210_priv *wil,
 				       struct sk_buff *skb)
 {
-	struct vring *v = &wil->vring_tx[0];
+	int i;
+	struct ethhdr *eth = (void *)skb->data;
+	int cid = wil_find_cid(wil, eth->h_dest);
+
+	if (cid < 0)
+		return NULL;
 
-	if (v->va)
-		return v;
+	/* TODO: fix for multiple TID */
+	for (i = 0; i < ARRAY_SIZE(wil->vring2cid_tid); i++) {
+		if (wil->vring2cid_tid[i][0] == cid) {
+			struct vring *v = &wil->vring_tx[i];
+			wil_dbg_txrx(wil, "%s(%pM) -> [%d]\n",
+				     __func__, eth->h_dest, i);
+			if (v->va) {
+				return v;
+			} else {
+				wil_dbg_txrx(wil, "vring[%d] not valid\n", i);
+				return NULL;
+			}
+		}
+	}
 
 	return NULL;
 }
@@ -740,9 +760,6 @@ static int wil_tx_vring(struct wil6210_priv *wil, struct vring *vring,
 	}
 	_d = &(vring->va[i].tx);
 
-	/* FIXME FW can accept only unicast frames for the peer */
-	memcpy(skb->data, wil->dst_addr[vring_index], ETH_ALEN);
-
 	pa = dma_map_single(dev, skb->data,
 			skb_headlen(skb), DMA_TO_DEVICE);
 
@@ -836,6 +853,7 @@ static int wil_tx_vring(struct wil6210_priv *wil, struct vring *vring,
 netdev_tx_t wil_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 {
 	struct wil6210_priv *wil = ndev_to_wil(ndev);
+	struct ethhdr *eth = (void *)skb->data;
 	struct vring *vring;
 	int rc;
 
@@ -854,9 +872,22 @@ netdev_tx_t wil_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 	}
 
 	/* find vring */
-	vring = wil_find_tx_vring(wil, skb);
+	if (is_unicast_ether_addr(eth->h_dest)) {
+		vring = wil_find_tx_vring(wil, skb);
+	} else {
+		int i = 0;
+		/* TODO: duplicate for all CID's */
+		vring = &wil->vring_tx[i];
+		if (vring->va) {
+			int cid = wil->vring2cid_tid[i][0];
+			/* FIXME FW can accept only unicast frames */
+			memcpy(skb->data, wil->sta[cid].addr, ETH_ALEN);
+		} else {
+			vring = NULL;
+		}
+	}
 	if (!vring) {
-		wil_err(wil, "No Tx VRING available\n");
+		wil_err(wil, "No Tx VRING found for %pM\n", eth->h_dest);
 		goto drop;
 	}
 	/* set up vring entry */
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index 0d7fba4f09e2..38df203f723d 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -226,6 +226,24 @@ struct wil6210_stats {
 	u16 peer_tx_sector;
 };
 
+enum wil_sta_status {
+	wil_sta_unused = 0,
+	wil_sta_conn_pending = 1,
+	wil_sta_connected = 2,
+};
+/**
+ * struct wil_sta_info - data for peer
+ *
+ * Peer identified by its CID (connection ID)
+ * NIC performs beam forming for each peer;
+ * if no beam forming done, frame exchange is not
+ * possible.
+ */
+struct wil_sta_info {
+	u8 addr[ETH_ALEN];
+	enum wil_sta_status status;
+};
+
 struct wil6210_priv {
 	struct pci_dev *pdev;
 	int n_msi;
@@ -267,7 +285,8 @@ struct wil6210_priv {
 	/* DMA related */
 	struct vring vring_rx;
 	struct vring vring_tx[WIL6210_MAX_TX_RINGS];
-	u8 dst_addr[WIL6210_MAX_TX_RINGS][ETH_ALEN];
+	u8 vring2cid_tid[WIL6210_MAX_TX_RINGS][2]; /* [0] - CID, [1] - TID */
+	struct wil_sta_info sta[WIL6210_MAX_CID];
 	/* scan */
 	struct cfg80211_scan_request *scan_request;
 
@@ -334,6 +353,7 @@ void wil_link_off(struct wil6210_priv *wil);
 int wil_up(struct wil6210_priv *wil);
 int wil_down(struct wil6210_priv *wil);
 void wil_mbox_ring_le2cpus(struct wil6210_mbox_ring *r);
+int wil_find_cid(struct wil6210_priv *wil, const u8 *mac);
 
 void __iomem *wmi_buffer(struct wil6210_priv *wil, __le32 ptr);
 void __iomem *wmi_addr(struct wil6210_priv *wil, u32 ptr);
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index d65da5590c5f..2d602901675d 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -384,6 +384,11 @@ static void wmi_evt_connect(struct wil6210_priv *wil, int id, void *d, int len)
 			evt->assoc_req_len, evt->assoc_resp_len);
 		return;
 	}
+	if (evt->cid >= WIL6210_MAX_CID) {
+		wil_err(wil, "Connect CID invalid : %d\n", evt->cid);
+		return;
+	}
+
 	ch = evt->channel + 1;
 	wil_dbg_wmi(wil, "Connect %pM channel [%d] cid %d\n",
 		    evt->bssid, ch, evt->cid);
@@ -439,7 +444,8 @@ static void wmi_evt_connect(struct wil6210_priv *wil, int id, void *d, int len)
 
 	/* FIXME FW can transmit only ucast frames to peer */
 	/* FIXME real ring_id instead of hard coded 0 */
-	memcpy(wil->dst_addr[0], evt->bssid, ETH_ALEN);
+	memcpy(wil->sta[evt->cid].addr, evt->bssid, ETH_ALEN);
+	wil->sta[evt->cid].status = wil_sta_conn_pending;
 
 	wil->pending_connect_cid = evt->cid;
 	queue_work(wil->wmi_wq_conn, &wil->connect_worker);
@@ -449,14 +455,19 @@ static void wmi_evt_disconnect(struct wil6210_priv *wil, int id,
 			       void *d, int len)
 {
 	struct wmi_disconnect_event *evt = d;
+	int cid = wil_find_cid(wil, evt->bssid);
 
-	wil_dbg_wmi(wil, "Disconnect %pM reason %d proto %d wmi\n",
-		    evt->bssid,
+	wil_dbg_wmi(wil, "Disconnect %pM CID %d reason %d proto %d wmi\n",
+		    evt->bssid, cid,
 		    evt->protocol_reason_status, evt->disconnect_reason);
 
 	wil->sinfo_gen++;
 
+	/* TODO: fix for multiple connections */
+
 	wil6210_disconnect(wil, evt->bssid);
+	if (cid >= 0)
+		wil->sta[cid].status = wil_sta_unused;
 }
 
 static void wmi_evt_notify(struct wil6210_priv *wil, int id, void *d, int len)
-- 
cgit v1.2.2


From b4490f423c0e61b77461be6557c62e533b8c60e3 Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Thu, 27 Feb 2014 16:20:44 +0200
Subject: wil6210: Block ACK

When running multiple connections, hardware can't do BACK reordering
and it should be done on the host.

Model after mac80211's implementation. Drop RCU for now;
to be re-added when BACK will be stabilized

BACK handshaking is not implemented yet in the hardware,
pretend it was done to support the way FW operating

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wil6210/Makefile     |   1 +
 drivers/net/wireless/ath/wil6210/debugfs.c    |  25 +++-
 drivers/net/wireless/ath/wil6210/main.c       |  12 +-
 drivers/net/wireless/ath/wil6210/rx_reorder.c | 177 ++++++++++++++++++++++++++
 drivers/net/wireless/ath/wil6210/txrx.c       |   6 +-
 drivers/net/wireless/ath/wil6210/txrx.h       |   7 +
 drivers/net/wireless/ath/wil6210/wil6210.h    |  47 +++++++
 drivers/net/wireless/ath/wil6210/wmi.c        |  22 +++-
 8 files changed, 290 insertions(+), 7 deletions(-)
 create mode 100644 drivers/net/wireless/ath/wil6210/rx_reorder.c

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/wil6210/Makefile b/drivers/net/wireless/ath/wil6210/Makefile
index 990dd42ae79e..c7a3465fd02a 100644
--- a/drivers/net/wireless/ath/wil6210/Makefile
+++ b/drivers/net/wireless/ath/wil6210/Makefile
@@ -9,6 +9,7 @@ wil6210-y += wmi.o
 wil6210-y += interrupt.o
 wil6210-y += txrx.o
 wil6210-y += debug.o
+wil6210-y += rx_reorder.o
 wil6210-$(CONFIG_WIL6210_TRACING) += trace.o
 
 # for tracing framework to find trace.h
diff --git a/drivers/net/wireless/ath/wil6210/debugfs.c b/drivers/net/wireless/ath/wil6210/debugfs.c
index f12aa0b1e1df..729e774ee96d 100644
--- a/drivers/net/wireless/ath/wil6210/debugfs.c
+++ b/drivers/net/wireless/ath/wil6210/debugfs.c
@@ -598,11 +598,24 @@ static const struct file_operations fops_temp = {
 };
 
 /*---------Station matrix------------*/
+static void wil_print_rxtid(struct seq_file *s, struct wil_tid_ampdu_rx *r)
+{
+	int i;
+	u16 index = ((r->head_seq_num - r->ssn) & 0xfff) % r->buf_size;
+	seq_printf(s, "0x%03x [", r->head_seq_num);
+	for (i = 0; i < r->buf_size; i++) {
+		if (i == index)
+			seq_printf(s, "%c", r->reorder_buf[i] ? 'O' : '|');
+		else
+			seq_printf(s, "%c", r->reorder_buf[i] ? '*' : '_');
+	}
+	seq_puts(s, "]\n");
+}
 
 static int wil_sta_debugfs_show(struct seq_file *s, void *data)
 {
 	struct wil6210_priv *wil = s->private;
-	int i;
+	int i, tid;
 
 	for (i = 0; i < ARRAY_SIZE(wil->sta); i++) {
 		struct wil_sta_info *p = &wil->sta[i];
@@ -619,6 +632,16 @@ static int wil_sta_debugfs_show(struct seq_file *s, void *data)
 			break;
 		}
 		seq_printf(s, "[%d] %pM %s\n", i, p->addr, status);
+
+		if (p->status == wil_sta_connected) {
+			for (tid = 0; tid < WIL_STA_TID_NUM; tid++) {
+				struct wil_tid_ampdu_rx *r = p->tid_rx[tid];
+				if (r) {
+					seq_printf(s, "[%2d] ", tid);
+					wil_print_rxtid(s, r);
+				}
+			}
+		}
 	}
 
 	return 0;
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index f68481de0ad7..38906f1bc769 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -18,6 +18,7 @@
 #include <linux/if_arp.h>
 
 #include "wil6210.h"
+#include "txrx.h"
 
 /*
  * Due to a hardware issue,
@@ -54,11 +55,20 @@ void wil_memcpy_toio_32(volatile void __iomem *dst, const void *src,
 
 static void _wil6210_disconnect(struct wil6210_priv *wil, void *bssid)
 {
-	uint i;
+	uint i, cid;
 	struct net_device *ndev = wil_to_ndev(wil);
 
 	wil_dbg_misc(wil, "%s()\n", __func__);
 
+	for (cid = 0; cid < WIL6210_MAX_CID; cid++) {
+		struct wil_sta_info *sta = &wil->sta[cid];
+		for (i = 0; i < WIL_STA_TID_NUM; i++) {
+			struct wil_tid_ampdu_rx *r = sta->tid_rx[i];
+			sta->tid_rx[i] = NULL;
+			wil_tid_ampdu_rx_free(wil, r);
+		}
+	}
+
 	wil_link_off(wil);
 	if (test_bit(wil_status_fwconnected, &wil->status)) {
 		clear_bit(wil_status_fwconnected, &wil->status);
diff --git a/drivers/net/wireless/ath/wil6210/rx_reorder.c b/drivers/net/wireless/ath/wil6210/rx_reorder.c
new file mode 100644
index 000000000000..d04629fe053f
--- /dev/null
+++ b/drivers/net/wireless/ath/wil6210/rx_reorder.c
@@ -0,0 +1,177 @@
+#include "wil6210.h"
+#include "txrx.h"
+
+#define SEQ_MODULO 0x1000
+#define SEQ_MASK   0xfff
+
+static inline int seq_less(u16 sq1, u16 sq2)
+{
+	return ((sq1 - sq2) & SEQ_MASK) > (SEQ_MODULO >> 1);
+}
+
+static inline u16 seq_inc(u16 sq)
+{
+	return (sq + 1) & SEQ_MASK;
+}
+
+static inline u16 seq_sub(u16 sq1, u16 sq2)
+{
+	return (sq1 - sq2) & SEQ_MASK;
+}
+
+static inline int reorder_index(struct wil_tid_ampdu_rx *r, u16 seq)
+{
+	return seq_sub(seq, r->ssn) % r->buf_size;
+}
+
+static void wil_release_reorder_frame(struct wil6210_priv *wil,
+				      struct wil_tid_ampdu_rx *r,
+				      int index)
+{
+	struct net_device *ndev = wil_to_ndev(wil);
+	struct sk_buff *skb = r->reorder_buf[index];
+
+	if (!skb)
+		goto no_frame;
+
+	/* release the frame from the reorder ring buffer */
+	r->stored_mpdu_num--;
+	r->reorder_buf[index] = NULL;
+	wil_netif_rx_any(skb, ndev);
+
+no_frame:
+	r->head_seq_num = seq_inc(r->head_seq_num);
+}
+
+static void wil_release_reorder_frames(struct wil6210_priv *wil,
+				       struct wil_tid_ampdu_rx *r,
+				       u16 hseq)
+{
+	int index;
+
+	while (seq_less(r->head_seq_num, hseq)) {
+		index = reorder_index(r, r->head_seq_num);
+		wil_release_reorder_frame(wil, r, index);
+	}
+}
+
+static void wil_reorder_release(struct wil6210_priv *wil,
+				struct wil_tid_ampdu_rx *r)
+{
+	int index = reorder_index(r, r->head_seq_num);
+
+	while (r->reorder_buf[index]) {
+		wil_release_reorder_frame(wil, r, index);
+		index = reorder_index(r, r->head_seq_num);
+	}
+}
+
+void wil_rx_reorder(struct wil6210_priv *wil, struct sk_buff *skb)
+{
+	struct net_device *ndev = wil_to_ndev(wil);
+	struct vring_rx_desc *d = wil_skb_rxdesc(skb);
+	int tid = wil_rxdesc_tid(d);
+	int cid = wil_rxdesc_cid(d);
+	int mid = wil_rxdesc_mid(d);
+	u16 seq = wil_rxdesc_seq(d);
+	struct wil_sta_info *sta = &wil->sta[cid];
+	struct wil_tid_ampdu_rx *r = sta->tid_rx[tid];
+	u16 hseq;
+	int index;
+
+	wil_dbg_txrx(wil, "MID %d CID %d TID %d Seq 0x%03x\n",
+		     mid, cid, tid, seq);
+
+	if (!r) {
+		wil_netif_rx_any(skb, ndev);
+		return;
+	}
+
+	hseq = r->head_seq_num;
+
+	spin_lock(&r->reorder_lock);
+
+	/* frame with out of date sequence number */
+	if (seq_less(seq, r->head_seq_num)) {
+		dev_kfree_skb(skb);
+		goto out;
+	}
+
+	/*
+	 * If frame the sequence number exceeds our buffering window
+	 * size release some previous frames to make room for this one.
+	 */
+	if (!seq_less(seq, r->head_seq_num + r->buf_size)) {
+		hseq = seq_inc(seq_sub(seq, r->buf_size));
+		/* release stored frames up to new head to stack */
+		wil_release_reorder_frames(wil, r, hseq);
+	}
+
+	/* Now the new frame is always in the range of the reordering buffer */
+
+	index = reorder_index(r, seq);
+
+	/* check if we already stored this frame */
+	if (r->reorder_buf[index]) {
+		dev_kfree_skb(skb);
+		goto out;
+	}
+
+	/*
+	 * If the current MPDU is in the right order and nothing else
+	 * is stored we can process it directly, no need to buffer it.
+	 * If it is first but there's something stored, we may be able
+	 * to release frames after this one.
+	 */
+	if (seq == r->head_seq_num && r->stored_mpdu_num == 0) {
+		r->head_seq_num = seq_inc(r->head_seq_num);
+		wil_netif_rx_any(skb, ndev);
+		goto out;
+	}
+
+	/* put the frame in the reordering buffer */
+	r->reorder_buf[index] = skb;
+	r->reorder_time[index] = jiffies;
+	r->stored_mpdu_num++;
+	wil_reorder_release(wil, r);
+
+out:
+	spin_unlock(&r->reorder_lock);
+}
+
+struct wil_tid_ampdu_rx *wil_tid_ampdu_rx_alloc(struct wil6210_priv *wil,
+						int size, u16 ssn)
+{
+	struct wil_tid_ampdu_rx *r = kzalloc(sizeof(*r), GFP_KERNEL);
+	if (!r)
+		return NULL;
+
+	r->reorder_buf =
+		kcalloc(size, sizeof(struct sk_buff *), GFP_KERNEL);
+	r->reorder_time =
+		kcalloc(size, sizeof(unsigned long), GFP_KERNEL);
+	if (!r->reorder_buf || !r->reorder_time) {
+		kfree(r->reorder_buf);
+		kfree(r->reorder_time);
+		kfree(r);
+		return NULL;
+	}
+
+	spin_lock_init(&r->reorder_lock);
+	r->ssn = ssn;
+	r->head_seq_num = ssn;
+	r->buf_size = size;
+	r->stored_mpdu_num = 0;
+	return r;
+}
+
+void wil_tid_ampdu_rx_free(struct wil6210_priv *wil,
+			   struct wil_tid_ampdu_rx *r)
+{
+	if (!r)
+		return;
+	wil_release_reorder_frames(wil, r, r->head_seq_num + r->buf_size);
+	kfree(r->reorder_buf);
+	kfree(r->reorder_time);
+	kfree(r);
+}
diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index eb60023fa217..48d97156f3db 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -472,7 +472,7 @@ static int wil_rx_refill(struct wil6210_priv *wil, int count)
  * Pass Rx packet to the netif. Update statistics.
  * Called in softirq context (NAPI poll).
  */
-static void wil_netif_rx_any(struct sk_buff *skb, struct net_device *ndev)
+void wil_netif_rx_any(struct sk_buff *skb, struct net_device *ndev)
 {
 	int rc;
 	unsigned int len = skb->len;
@@ -515,12 +515,12 @@ void wil_rx_handle(struct wil6210_priv *wil, int *quota)
 			skb->ip_summed = CHECKSUM_UNNECESSARY;
 			skb->pkt_type = PACKET_OTHERHOST;
 			skb->protocol = htons(ETH_P_802_2);
-
+			wil_netif_rx_any(skb, ndev);
 		} else {
 			skb->protocol = eth_type_trans(skb, ndev);
+			wil_rx_reorder(wil, skb);
 		}
 
-		wil_netif_rx_any(skb, ndev);
 	}
 	wil_rx_refill(wil, v->size);
 }
diff --git a/drivers/net/wireless/ath/wil6210/txrx.h b/drivers/net/wireless/ath/wil6210/txrx.h
index b3828279204c..bc5706a4f007 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.h
+++ b/drivers/net/wireless/ath/wil6210/txrx.h
@@ -436,4 +436,11 @@ static inline struct vring_rx_desc *wil_skb_rxdesc(struct sk_buff *skb)
 	return (void *)skb->cb;
 }
 
+void wil_netif_rx_any(struct sk_buff *skb, struct net_device *ndev);
+void wil_rx_reorder(struct wil6210_priv *wil, struct sk_buff *skb);
+struct wil_tid_ampdu_rx *wil_tid_ampdu_rx_alloc(struct wil6210_priv *wil,
+						int size, u16 ssn);
+void wil_tid_ampdu_rx_free(struct wil6210_priv *wil,
+			   struct wil_tid_ampdu_rx *r);
+
 #endif /* WIL6210_TXRX_H */
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index 38df203f723d..304b990295b7 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -215,6 +215,46 @@ enum { /* for wil6210_priv.status */
 
 struct pci_dev;
 
+/**
+ * struct tid_ampdu_rx - TID aggregation information (Rx).
+ *
+ * @reorder_buf: buffer to reorder incoming aggregated MPDUs
+ * @reorder_time: jiffies when skb was added
+ * @session_timer: check if peer keeps Tx-ing on the TID (by timeout value)
+ * @reorder_timer: releases expired frames from the reorder buffer.
+ * @last_rx: jiffies of last rx activity
+ * @head_seq_num: head sequence number in reordering buffer.
+ * @stored_mpdu_num: number of MPDUs in reordering buffer
+ * @ssn: Starting Sequence Number expected to be aggregated.
+ * @buf_size: buffer size for incoming A-MPDUs
+ * @timeout: reset timer value (in TUs).
+ * @dialog_token: dialog token for aggregation session
+ * @rcu_head: RCU head used for freeing this struct
+ * @reorder_lock: serializes access to reorder buffer, see below.
+ *
+ * This structure's lifetime is managed by RCU, assignments to
+ * the array holding it must hold the aggregation mutex.
+ *
+ * The @reorder_lock is used to protect the members of this
+ * struct, except for @timeout, @buf_size and @dialog_token,
+ * which are constant across the lifetime of the struct (the
+ * dialog token being used only for debugging).
+ */
+struct wil_tid_ampdu_rx {
+	spinlock_t reorder_lock; /* see above */
+	struct sk_buff **reorder_buf;
+	unsigned long *reorder_time;
+	struct timer_list session_timer;
+	struct timer_list reorder_timer;
+	unsigned long last_rx;
+	u16 head_seq_num;
+	u16 stored_mpdu_num;
+	u16 ssn;
+	u16 buf_size;
+	u16 timeout;
+	u8 dialog_token;
+};
+
 struct wil6210_stats {
 	u64 tsf;
 	u32 snr;
@@ -231,6 +271,9 @@ enum wil_sta_status {
 	wil_sta_conn_pending = 1,
 	wil_sta_connected = 2,
 };
+
+#define WIL_STA_TID_NUM (16)
+
 /**
  * struct wil_sta_info - data for peer
  *
@@ -242,6 +285,10 @@ enum wil_sta_status {
 struct wil_sta_info {
 	u8 addr[ETH_ALEN];
 	enum wil_sta_status status;
+	/* Rx BACK */
+	struct wil_tid_ampdu_rx *tid_rx[WIL_STA_TID_NUM];
+	unsigned long tid_rx_timer_expired[BITS_TO_LONGS(WIL_STA_TID_NUM)];
+	unsigned long tid_rx_stop_requested[BITS_TO_LONGS(WIL_STA_TID_NUM)];
 };
 
 struct wil6210_priv {
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index 2d602901675d..dfbc239b149d 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -563,10 +563,27 @@ static void wmi_evt_ba_status(struct wil6210_priv *wil, int id, void *d,
 			      int len)
 {
 	struct wmi_vring_ba_status_event *evt = d;
+	uint cid, i;
 
 	wil_dbg_wmi(wil, "BACK[%d] %s {%d} timeout %d\n",
-		    evt->ringid, evt->status ? "N/A" : "OK", evt->agg_wsize,
-		    __le16_to_cpu(evt->ba_timeout));
+		    evt->ringid, evt->status == WMI_BA_AGREED ? "OK" : "N/A",
+		    evt->agg_wsize, __le16_to_cpu(evt->ba_timeout));
+	for (cid = 0; cid < WIL6210_MAX_CID; cid++) {
+		struct wil_sta_info *sta = &wil->sta[cid];
+
+		if (sta->status == wil_sta_unused)
+			continue;
+		wil_dbg_wmi(wil, "Init BACK for CID %d %pM\n", cid, sta->addr);
+		for (i = 0; i < WIL_STA_TID_NUM; i++) {
+			struct wil_tid_ampdu_rx *r = sta->tid_rx[i];
+			sta->tid_rx[i] = NULL;
+			wil_tid_ampdu_rx_free(wil, r);
+			if ((evt->status == WMI_BA_AGREED) && evt->agg_wsize)
+				sta->tid_rx[i] = wil_tid_ampdu_rx_alloc(wil,
+							evt->agg_wsize, 0);
+		}
+	}
+
 }
 
 static const struct {
@@ -949,6 +966,7 @@ int wmi_rx_chain_add(struct wil6210_priv *wil, struct vring *vring)
 		},
 		.mid = 0, /* TODO - what is it? */
 		.decap_trans_type = WMI_DECAP_TYPE_802_3,
+		.reorder_type = WMI_RX_SW_REORDER,
 	};
 	struct {
 		struct wil6210_mbox_hdr_wmi wmi;
-- 
cgit v1.2.2


From 9a1773847d592c546f1fd5100d6ff434b414bedc Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Thu, 27 Feb 2014 16:20:45 +0200
Subject: wil6210: Find free vring for Tx

There are 24 possible Tx vrings; when doind multiple connections, more then
one vring has to be used. Search for free one and select it.

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wil6210/main.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index 38906f1bc769..5079e4944205 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -107,12 +107,23 @@ static void wil_connect_timer_fn(ulong x)
 	schedule_work(&wil->disconnect_worker);
 }
 
+static int wil_find_free_vring(struct wil6210_priv *wil)
+{
+	int i;
+	for (i = 0; i < WIL6210_MAX_TX_RINGS; i++) {
+		if (!wil->vring_tx[i].va)
+			return i;
+	}
+	return -EINVAL;
+}
+
 static void wil_connect_worker(struct work_struct *work)
 {
 	int rc;
 	struct wil6210_priv *wil = container_of(work, struct wil6210_priv,
 						connect_worker);
 	int cid = wil->pending_connect_cid;
+	int ringid = wil_find_free_vring(wil);
 
 	if (cid < 0) {
 		wil_err(wil, "No connection pending\n");
@@ -121,7 +132,7 @@ static void wil_connect_worker(struct work_struct *work)
 
 	wil_dbg_wmi(wil, "Configure for connection CID %d\n", cid);
 
-	rc = wil_vring_init_tx(wil, 0, WIL6210_TX_RING_SIZE, cid, 0);
+	rc = wil_vring_init_tx(wil, ringid, WIL6210_TX_RING_SIZE, cid, 0);
 	wil->pending_connect_cid = -1;
 	if (rc == 0) {
 		wil->sta[cid].status = wil_sta_connected;
-- 
cgit v1.2.2


From fb3cac572657fccf4e4406bd9737a0b3aaf54458 Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Thu, 27 Feb 2014 16:20:46 +0200
Subject: wil6210: broadcast Tx

Hardware do not support "real" broadcast on the air.
Use method similar to the Directed Multicast Service (DMS) as
described in the 10.23.15.2 "DMS procedures"

This service copies frame and delivers unicast for each associated peer

Do the following: send original frame to 1-st Tx vring, and send copies
to all other active vrings.

As currently hardware/firmware don't support A-MSDU, convert broadcast
frame to unicast instead of wrapping it in A-MSDU

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wil6210/txrx.c | 65 ++++++++++++++++++++++++++++-----
 1 file changed, 55 insertions(+), 10 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index 48d97156f3db..5ff59ee9c9f6 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -662,6 +662,60 @@ static struct vring *wil_find_tx_vring(struct wil6210_priv *wil,
 	return NULL;
 }
 
+static void wil_set_da_for_vring(struct wil6210_priv *wil,
+				 struct sk_buff *skb, int vring_index)
+{
+	struct ethhdr *eth = (void *)skb->data;
+	int cid = wil->vring2cid_tid[vring_index][0];
+	memcpy(eth->h_dest, wil->sta[cid].addr, ETH_ALEN);
+}
+
+static int wil_tx_vring(struct wil6210_priv *wil, struct vring *vring,
+			struct sk_buff *skb);
+/*
+ * Find 1-st vring and return it; set dest address for this vring in skb
+ * duplicate skb and send it to other active vrings
+ */
+static struct vring *wil_tx_bcast(struct wil6210_priv *wil,
+				       struct sk_buff *skb)
+{
+	struct vring *v, *v2;
+	struct sk_buff *skb2;
+	int i;
+
+	/* find 1-st vring */
+	for (i = 0; i < WIL6210_MAX_TX_RINGS; i++) {
+		v = &wil->vring_tx[i];
+		if (v->va)
+			goto found;
+	}
+
+	wil_err(wil, "Tx while no vrings active?\n");
+
+	return NULL;
+
+found:
+	wil_dbg_txrx(wil, "BCAST -> ring %d\n", i);
+	wil_set_da_for_vring(wil, skb, i);
+
+	/* find other active vrings and duplicate skb for each */
+	for (i++; i < WIL6210_MAX_TX_RINGS; i++) {
+		v2 = &wil->vring_tx[i];
+		if (!v2->va)
+			continue;
+		skb2 = skb_copy(skb, GFP_ATOMIC);
+		if (skb2) {
+			wil_dbg_txrx(wil, "BCAST DUP -> ring %d\n", i);
+			wil_set_da_for_vring(wil, skb2, i);
+			wil_tx_vring(wil, v2, skb2);
+		} else {
+			wil_err(wil, "skb_copy failed\n");
+		}
+	}
+
+	return v;
+}
+
 static int wil_tx_desc_map(struct vring_tx_desc *d, dma_addr_t pa, u32 len,
 			   int vring_index)
 {
@@ -875,16 +929,7 @@ netdev_tx_t wil_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 	if (is_unicast_ether_addr(eth->h_dest)) {
 		vring = wil_find_tx_vring(wil, skb);
 	} else {
-		int i = 0;
-		/* TODO: duplicate for all CID's */
-		vring = &wil->vring_tx[i];
-		if (vring->va) {
-			int cid = wil->vring2cid_tid[i][0];
-			/* FIXME FW can accept only unicast frames */
-			memcpy(skb->data, wil->sta[cid].addr, ETH_ALEN);
-		} else {
-			vring = NULL;
-		}
+		vring = wil_tx_bcast(wil, skb);
 	}
 	if (!vring) {
 		wil_err(wil, "No Tx VRING found for %pM\n", eth->h_dest);
-- 
cgit v1.2.2


From 7b05b0ab89e692eb45b011169afb2359d5d92c6c Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Thu, 27 Feb 2014 16:20:47 +0200
Subject: wil6210: fix BACK status processing

When FW notifies about BACK status change, it provides ring ID.
Process BA status for requested connection only. As for now, FW
don't report Rx BACK status, it reports Tx one instead.
As per current algorithm used in the firmware, imply Rx BACK
state is in sync with Tx one

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wil6210/wmi.c | 47 ++++++++++++++++++++++------------
 1 file changed, 31 insertions(+), 16 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index dfbc239b149d..635aa322608c 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -563,27 +563,42 @@ static void wmi_evt_ba_status(struct wil6210_priv *wil, int id, void *d,
 			      int len)
 {
 	struct wmi_vring_ba_status_event *evt = d;
-	uint cid, i;
+	struct wil_sta_info *sta;
+	uint i, cid;
+
+	/* TODO: use Rx BA status, not Tx one */
 
 	wil_dbg_wmi(wil, "BACK[%d] %s {%d} timeout %d\n",
-		    evt->ringid, evt->status == WMI_BA_AGREED ? "OK" : "N/A",
+		    evt->ringid,
+		    evt->status == WMI_BA_AGREED ? "OK" : "N/A",
 		    evt->agg_wsize, __le16_to_cpu(evt->ba_timeout));
-	for (cid = 0; cid < WIL6210_MAX_CID; cid++) {
-		struct wil_sta_info *sta = &wil->sta[cid];
-
-		if (sta->status == wil_sta_unused)
-			continue;
-		wil_dbg_wmi(wil, "Init BACK for CID %d %pM\n", cid, sta->addr);
-		for (i = 0; i < WIL_STA_TID_NUM; i++) {
-			struct wil_tid_ampdu_rx *r = sta->tid_rx[i];
-			sta->tid_rx[i] = NULL;
-			wil_tid_ampdu_rx_free(wil, r);
-			if ((evt->status == WMI_BA_AGREED) && evt->agg_wsize)
-				sta->tid_rx[i] = wil_tid_ampdu_rx_alloc(wil,
-							evt->agg_wsize, 0);
-		}
+
+	if (evt->ringid >= WIL6210_MAX_TX_RINGS) {
+		wil_err(wil, "invalid ring id %d\n", evt->ringid);
+		return;
 	}
 
+	cid = wil->vring2cid_tid[evt->ringid][0];
+	if (cid >= WIL6210_MAX_CID) {
+		wil_err(wil, "invalid CID %d for vring %d\n", cid, evt->ringid);
+		return;
+	}
+
+	sta = &wil->sta[cid];
+	if (sta->status == wil_sta_unused) {
+		wil_err(wil, "CID %d unused\n", cid);
+		return;
+	}
+
+	wil_dbg_wmi(wil, "BACK for CID %d %pM\n", cid, sta->addr);
+	for (i = 0; i < WIL_STA_TID_NUM; i++) {
+		struct wil_tid_ampdu_rx *r = sta->tid_rx[i];
+		sta->tid_rx[i] = NULL;
+		wil_tid_ampdu_rx_free(wil, r);
+		if ((evt->status == WMI_BA_AGREED) && evt->agg_wsize)
+			sta->tid_rx[i] = wil_tid_ampdu_rx_alloc(wil,
+						evt->agg_wsize, 0);
+	}
 }
 
 static const struct {
-- 
cgit v1.2.2


From ef28afdb1cbb01dd15840eae3786b84ddfa83c6a Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Thu, 27 Feb 2014 16:20:48 +0200
Subject: wil6210: dump_station initial support

Rx stats is not calculated per STA - just give some number

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wil6210/cfg80211.c | 82 +++++++++++++++++++++++------
 1 file changed, 66 insertions(+), 16 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index fa713ef8dc95..495347baf523 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -104,27 +104,21 @@ int wil_iftype_nl2wmi(enum nl80211_iftype type)
 	return -EOPNOTSUPP;
 }
 
-static int wil_cfg80211_get_station(struct wiphy *wiphy,
-				    struct net_device *ndev,
-				    u8 *mac, struct station_info *sinfo)
+static int wil_cid_fill_sinfo(struct wil6210_priv *wil, int cid,
+			      struct station_info *sinfo)
 {
-	struct wil6210_priv *wil = wiphy_to_wil(wiphy);
-	int rc;
-
-	int cid = wil_find_cid(wil, mac);
 	struct wmi_notify_req_cmd cmd = {
 		.cid = cid,
 		.interval_usec = 0,
 	};
+	struct {
+		struct wil6210_mbox_hdr_wmi wmi;
+		struct wmi_notify_req_done_event evt;
+	} __packed reply;
+	int rc;
 
-	wil_info(wil, "%s(%pM) CID %d\n", __func__, mac, cid);
-	if (cid < 0)
-		return -ENOENT;
-
-	/* WMI_NOTIFY_REQ_DONE_EVENTID handler fills wil->stats.bf_mcs */
-	/* TODO: keep stats per CID */
 	rc = wmi_call(wil, WMI_NOTIFY_REQ_CMDID, &cmd, sizeof(cmd),
-		      WMI_NOTIFY_REQ_DONE_EVENTID, NULL, 0, 20);
+		      WMI_NOTIFY_REQ_DONE_EVENTID, &reply, sizeof(reply), 20);
 	if (rc)
 		return rc;
 
@@ -132,7 +126,7 @@ static int wil_cfg80211_get_station(struct wiphy *wiphy,
 
 	sinfo->filled |= STATION_INFO_TX_BITRATE;
 	sinfo->txrate.flags = RATE_INFO_FLAGS_MCS | RATE_INFO_FLAGS_60G;
-	sinfo->txrate.mcs = wil->stats.bf_mcs;
+	sinfo->txrate.mcs = le16_to_cpu(reply.evt.bf_mcs);
 	sinfo->filled |= STATION_INFO_RX_BITRATE;
 	sinfo->rxrate.flags = RATE_INFO_FLAGS_MCS | RATE_INFO_FLAGS_60G;
 	sinfo->rxrate.mcs = wil->stats.last_mcs_rx;
@@ -142,7 +136,62 @@ static int wil_cfg80211_get_station(struct wiphy *wiphy,
 		sinfo->signal = 12; /* TODO: provide real value */
 	}
 
-	return 0;
+	return rc;
+}
+
+static int wil_cfg80211_get_station(struct wiphy *wiphy,
+				    struct net_device *ndev,
+				    u8 *mac, struct station_info *sinfo)
+{
+	struct wil6210_priv *wil = wiphy_to_wil(wiphy);
+	int rc;
+
+	int cid = wil_find_cid(wil, mac);
+
+	wil_info(wil, "%s(%pM) CID %d\n", __func__, mac, cid);
+	if (cid < 0)
+		return -ENOENT;
+
+	rc = wil_cid_fill_sinfo(wil, cid, sinfo);
+
+	return rc;
+}
+
+/*
+ * Find @idx-th active STA for station dump.
+ */
+static int wil_find_cid_by_idx(struct wil6210_priv *wil, int idx)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(wil->sta); i++) {
+		if (wil->sta[i].status == wil_sta_unused)
+			continue;
+		if (idx == 0)
+			return i;
+		idx--;
+	}
+
+	return -ENOENT;
+}
+
+static int wil_cfg80211_dump_station(struct wiphy *wiphy,
+				     struct net_device *dev, int idx,
+				     u8 *mac, struct station_info *sinfo)
+{
+	struct wil6210_priv *wil = wiphy_to_wil(wiphy);
+	int rc;
+	int cid = wil_find_cid_by_idx(wil, idx);
+
+	if (cid < 0)
+		return -ENOENT;
+
+	memcpy(mac, wil->sta[cid].addr, ETH_ALEN);
+	wil_info(wil, "%s(%pM) CID %d\n", __func__, mac, cid);
+
+	rc = wil_cid_fill_sinfo(wil, cid, sinfo);
+
+	return rc;
 }
 
 static int wil_cfg80211_change_iface(struct wiphy *wiphy,
@@ -583,6 +632,7 @@ static struct cfg80211_ops wil_cfg80211_ops = {
 	.disconnect = wil_cfg80211_disconnect,
 	.change_virtual_intf = wil_cfg80211_change_iface,
 	.get_station = wil_cfg80211_get_station,
+	.dump_station = wil_cfg80211_dump_station,
 	.remain_on_channel = wil_remain_on_channel,
 	.cancel_remain_on_channel = wil_cancel_remain_on_channel,
 	.mgmt_tx = wil_cfg80211_mgmt_tx,
-- 
cgit v1.2.2


From c8b78b5f0fa2783e9289c67e3f7524e6679874a9 Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Thu, 27 Feb 2014 16:20:49 +0200
Subject: wil6210: per-connection statistics

Calculate statistics per connection, report with "iw station dump"

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wil6210/cfg80211.c | 36 ++++++++++++++++++++++++++---
 drivers/net/wireless/ath/wil6210/txrx.c     | 21 +++++++++++++++--
 drivers/net/wireless/ath/wil6210/wil6210.h  | 11 +++++++++
 drivers/net/wireless/ath/wil6210/wmi.c      | 15 +++++++++++-
 4 files changed, 77 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index 495347baf523..12e0539c8eff 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -115,6 +115,7 @@ static int wil_cid_fill_sinfo(struct wil6210_priv *wil, int cid,
 		struct wil6210_mbox_hdr_wmi wmi;
 		struct wmi_notify_req_done_event evt;
 	} __packed reply;
+	struct wil_net_stats *stats = &wil->sta[cid].stats;
 	int rc;
 
 	rc = wmi_call(wil, WMI_NOTIFY_REQ_CMDID, &cmd, sizeof(cmd),
@@ -122,14 +123,43 @@ static int wil_cid_fill_sinfo(struct wil6210_priv *wil, int cid,
 	if (rc)
 		return rc;
 
+	wil_dbg_wmi(wil, "Link status for CID %d: {\n"
+		    "  MCS %d TSF 0x%016llx\n"
+		    "  BF status 0x%08x SNR 0x%08x\n"
+		    "  Tx Tpt %d goodput %d Rx goodput %d\n"
+		    "  Sectors(rx:tx) my %d:%d peer %d:%d\n""}\n",
+		    cid, le16_to_cpu(reply.evt.bf_mcs),
+		    le64_to_cpu(reply.evt.tsf), reply.evt.status,
+		    le32_to_cpu(reply.evt.snr_val),
+		    le32_to_cpu(reply.evt.tx_tpt),
+		    le32_to_cpu(reply.evt.tx_goodput),
+		    le32_to_cpu(reply.evt.rx_goodput),
+		    le16_to_cpu(reply.evt.my_rx_sector),
+		    le16_to_cpu(reply.evt.my_tx_sector),
+		    le16_to_cpu(reply.evt.other_rx_sector),
+		    le16_to_cpu(reply.evt.other_tx_sector));
+
 	sinfo->generation = wil->sinfo_gen;
 
-	sinfo->filled |= STATION_INFO_TX_BITRATE;
+	sinfo->filled = STATION_INFO_RX_BYTES |
+			STATION_INFO_TX_BYTES |
+			STATION_INFO_RX_PACKETS |
+			STATION_INFO_TX_PACKETS |
+			STATION_INFO_RX_BITRATE |
+			STATION_INFO_TX_BITRATE |
+			STATION_INFO_RX_DROP_MISC |
+			STATION_INFO_TX_FAILED;
+
 	sinfo->txrate.flags = RATE_INFO_FLAGS_MCS | RATE_INFO_FLAGS_60G;
 	sinfo->txrate.mcs = le16_to_cpu(reply.evt.bf_mcs);
-	sinfo->filled |= STATION_INFO_RX_BITRATE;
 	sinfo->rxrate.flags = RATE_INFO_FLAGS_MCS | RATE_INFO_FLAGS_60G;
-	sinfo->rxrate.mcs = wil->stats.last_mcs_rx;
+	sinfo->rxrate.mcs = stats->last_mcs_rx;
+	sinfo->rx_bytes = stats->rx_bytes;
+	sinfo->rx_packets = stats->rx_packets;
+	sinfo->rx_dropped_misc = stats->rx_dropped;
+	sinfo->tx_bytes = stats->tx_bytes;
+	sinfo->tx_packets = stats->tx_packets;
+	sinfo->tx_failed = stats->tx_errors;
 
 	if (test_bit(wil_status_fwconnected, &wil->status)) {
 		sinfo->filled |= STATION_INFO_SIGNAL;
diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index 5ff59ee9c9f6..baced1bca04c 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -344,6 +344,9 @@ static struct sk_buff *wil_vring_reap_rx(struct wil6210_priv *wil,
 	u16 dmalen;
 	u8 ftype;
 	u8 ds_bits;
+	int cid;
+	struct wil_net_stats *stats;
+
 
 	BUILD_BUG_ON(sizeof(struct vring_rx_desc) > sizeof(skb->cb));
 
@@ -383,8 +386,10 @@ static struct sk_buff *wil_vring_reap_rx(struct wil6210_priv *wil,
 	wil_hex_dump_txrx("Rx ", DUMP_PREFIX_OFFSET, 16, 1,
 			  skb->data, skb_headlen(skb), false);
 
-
-	wil->stats.last_mcs_rx = wil_rxdesc_mcs(d);
+	cid = wil_rxdesc_cid(d);
+	stats = &wil->sta[cid].stats;
+	stats->last_mcs_rx = wil_rxdesc_mcs(d);
+	wil->stats.last_mcs_rx = stats->last_mcs_rx;
 
 	/* use radiotap header only if required */
 	if (ndev->type == ARPHRD_IEEE80211_RADIOTAP)
@@ -475,7 +480,11 @@ static int wil_rx_refill(struct wil6210_priv *wil, int count)
 void wil_netif_rx_any(struct sk_buff *skb, struct net_device *ndev)
 {
 	int rc;
+	struct wil6210_priv *wil = ndev_to_wil(ndev);
 	unsigned int len = skb->len;
+	struct vring_rx_desc *d = wil_skb_rxdesc(skb);
+	int cid = wil_rxdesc_cid(d);
+	struct wil_net_stats *stats = &wil->sta[cid].stats;
 
 	skb_orphan(skb);
 
@@ -483,10 +492,13 @@ void wil_netif_rx_any(struct sk_buff *skb, struct net_device *ndev)
 
 	if (likely(rc == NET_RX_SUCCESS)) {
 		ndev->stats.rx_packets++;
+		stats->rx_packets++;
 		ndev->stats.rx_bytes += len;
+		stats->rx_bytes += len;
 
 	} else {
 		ndev->stats.rx_dropped++;
+		stats->rx_dropped++;
 	}
 }
 
@@ -968,6 +980,8 @@ int wil_tx_complete(struct wil6210_priv *wil, int ringid)
 	struct device *dev = wil_to_dev(wil);
 	struct vring *vring = &wil->vring_tx[ringid];
 	int done = 0;
+	int cid = wil->vring2cid_tid[ringid][0];
+	struct wil_net_stats *stats = &wil->sta[cid].stats;
 
 	if (!vring->va) {
 		wil_err(wil, "Tx irq[%d]: vring not initialized\n", ringid);
@@ -1009,9 +1023,12 @@ int wil_tx_complete(struct wil6210_priv *wil, int ringid)
 		if (skb) {
 			if (d->dma.error == 0) {
 				ndev->stats.tx_packets++;
+				stats->tx_packets++;
 				ndev->stats.tx_bytes += skb->len;
+				stats->tx_bytes += skb->len;
 			} else {
 				ndev->stats.tx_errors++;
+				stats->tx_errors++;
 			}
 
 			dev_kfree_skb_any(skb);
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index 304b990295b7..b64175aae1dd 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -274,6 +274,16 @@ enum wil_sta_status {
 
 #define WIL_STA_TID_NUM (16)
 
+struct wil_net_stats {
+	unsigned long	rx_packets;
+	unsigned long	tx_packets;
+	unsigned long	rx_bytes;
+	unsigned long	tx_bytes;
+	unsigned long	tx_errors;
+	unsigned long	rx_dropped;
+	u16 last_mcs_rx;
+};
+
 /**
  * struct wil_sta_info - data for peer
  *
@@ -285,6 +295,7 @@ enum wil_sta_status {
 struct wil_sta_info {
 	u8 addr[ETH_ALEN];
 	enum wil_sta_status status;
+	struct wil_net_stats stats;
 	/* Rx BACK */
 	struct wil_tid_ampdu_rx *tid_rx[WIL_STA_TID_NUM];
 	unsigned long tid_rx_timer_expired[BITS_TO_LONGS(WIL_STA_TID_NUM)];
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index 635aa322608c..8de7ffdc0f29 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -510,10 +510,16 @@ static void wmi_evt_eapol_rx(struct wil6210_priv *wil, int id,
 	int sz = eapol_len + ETH_HLEN;
 	struct sk_buff *skb;
 	struct ethhdr *eth;
+	int cid;
+	struct wil_net_stats *stats = NULL;
 
 	wil_dbg_wmi(wil, "EAPOL len %d from %pM\n", eapol_len,
 		    evt->src_mac);
 
+	cid = wil_find_cid(wil, evt->src_mac);
+	if (cid >= 0)
+		stats = &wil->sta[cid].stats;
+
 	if (eapol_len > 196) { /* TODO: revisit size limit */
 		wil_err(wil, "EAPOL too large\n");
 		return;
@@ -524,6 +530,7 @@ static void wmi_evt_eapol_rx(struct wil6210_priv *wil, int id,
 		wil_err(wil, "Failed to allocate skb\n");
 		return;
 	}
+
 	eth = (struct ethhdr *)skb_put(skb, ETH_HLEN);
 	memcpy(eth->h_dest, ndev->dev_addr, ETH_ALEN);
 	memcpy(eth->h_source, evt->src_mac, ETH_ALEN);
@@ -532,9 +539,15 @@ static void wmi_evt_eapol_rx(struct wil6210_priv *wil, int id,
 	skb->protocol = eth_type_trans(skb, ndev);
 	if (likely(netif_rx_ni(skb) == NET_RX_SUCCESS)) {
 		ndev->stats.rx_packets++;
-		ndev->stats.rx_bytes += skb->len;
+		ndev->stats.rx_bytes += sz;
+		if (stats) {
+			stats->rx_packets++;
+			stats->rx_bytes += sz;
+		}
 	} else {
 		ndev->stats.rx_dropped++;
+		if (stats)
+			stats->rx_dropped++;
 	}
 }
 
-- 
cgit v1.2.2


From 91886b0b7d65b8f5e0f6b2b7de90cd714d41844e Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Thu, 27 Feb 2014 16:20:50 +0200
Subject: wil6210: disconnect only requested peer

Disconnect event reported by the FW, should lead to disconnection
of only requested peer. Find for the appropriate CID and disconnect
only it

For AP-like interface, notify cfg80211 with del_sta(),
for the client type interface, disconnect and turn link off.

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wil6210/main.c | 81 +++++++++++++++++++++++----------
 1 file changed, 56 insertions(+), 25 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index 5079e4944205..361c693270cc 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -53,38 +53,69 @@ void wil_memcpy_toio_32(volatile void __iomem *dst, const void *src,
 		__raw_writel(*s++, d++);
 }
 
+static void wil_disconnect_cid(struct wil6210_priv *wil, int cid)
+{
+	uint i;
+	struct wil_sta_info *sta = &wil->sta[cid];
+	for (i = 0; i < WIL_STA_TID_NUM; i++) {
+		struct wil_tid_ampdu_rx *r = sta->tid_rx[i];
+		sta->tid_rx[i] = NULL;
+		wil_tid_ampdu_rx_free(wil, r);
+	}
+	for (i = 0; i < ARRAY_SIZE(wil->vring_tx); i++) {
+		if (wil->vring2cid_tid[i][0] == cid)
+			wil_vring_fini_tx(wil, i);
+	}
+	memset(&sta->stats, 0, sizeof(sta->stats));
+}
+
 static void _wil6210_disconnect(struct wil6210_priv *wil, void *bssid)
 {
-	uint i, cid;
+	int cid = -ENOENT;
 	struct net_device *ndev = wil_to_ndev(wil);
+	struct wireless_dev *wdev = wil->wdev;
 
-	wil_dbg_misc(wil, "%s()\n", __func__);
-
-	for (cid = 0; cid < WIL6210_MAX_CID; cid++) {
-		struct wil_sta_info *sta = &wil->sta[cid];
-		for (i = 0; i < WIL_STA_TID_NUM; i++) {
-			struct wil_tid_ampdu_rx *r = sta->tid_rx[i];
-			sta->tid_rx[i] = NULL;
-			wil_tid_ampdu_rx_free(wil, r);
-		}
+	might_sleep();
+	if (bssid) {
+		cid = wil_find_cid(wil, bssid);
+		wil_dbg_misc(wil, "%s(%pM, CID %d)\n", __func__, bssid, cid);
+	} else {
+		wil_dbg_misc(wil, "%s(all)\n", __func__);
 	}
 
-	wil_link_off(wil);
-	if (test_bit(wil_status_fwconnected, &wil->status)) {
-		clear_bit(wil_status_fwconnected, &wil->status);
-		cfg80211_disconnected(ndev,
-				      WLAN_STATUS_UNSPECIFIED_FAILURE,
-				      NULL, 0, GFP_KERNEL);
-	} else if (test_bit(wil_status_fwconnecting, &wil->status)) {
-		cfg80211_connect_result(ndev, bssid, NULL, 0, NULL, 0,
-					WLAN_STATUS_UNSPECIFIED_FAILURE,
-					GFP_KERNEL);
-	}
-	clear_bit(wil_status_fwconnecting, &wil->status);
-	for (i = 0; i < ARRAY_SIZE(wil->vring_tx); i++)
-		wil_vring_fini_tx(wil, i);
+	if (cid >= 0) /* disconnect 1 peer */
+		wil_disconnect_cid(wil, cid);
+	else /* disconnect all */
+		for (cid = 0; cid < WIL6210_MAX_CID; cid++)
+			wil_disconnect_cid(wil, cid);
 
-	clear_bit(wil_status_dontscan, &wil->status);
+	/* link state */
+	switch (wdev->iftype) {
+	case NL80211_IFTYPE_STATION:
+	case NL80211_IFTYPE_P2P_CLIENT:
+		wil_link_off(wil);
+		if (test_bit(wil_status_fwconnected, &wil->status)) {
+			clear_bit(wil_status_fwconnected, &wil->status);
+			cfg80211_disconnected(ndev,
+					      WLAN_STATUS_UNSPECIFIED_FAILURE,
+					      NULL, 0, GFP_KERNEL);
+		} else if (test_bit(wil_status_fwconnecting, &wil->status)) {
+			cfg80211_connect_result(ndev, bssid, NULL, 0, NULL, 0,
+						WLAN_STATUS_UNSPECIFIED_FAILURE,
+						GFP_KERNEL);
+		}
+		clear_bit(wil_status_fwconnecting, &wil->status);
+		wil_dbg_misc(wil, "clear_bit(wil_status_dontscan)\n");
+		clear_bit(wil_status_dontscan, &wil->status);
+		break;
+	default:
+		/* AP-like interface and monitor:
+		 * never scan, always connected
+		 */
+		if (bssid)
+			cfg80211_del_sta(ndev, bssid, GFP_KERNEL);
+		break;
+	}
 }
 
 static void wil_disconnect_worker(struct work_struct *work)
-- 
cgit v1.2.2


From 93ae6d49e2ddd05431184779d8ace0bc189a597b Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Thu, 27 Feb 2014 16:20:51 +0200
Subject: wil6210: Fill vring2cid_tid table early

Need to fill translation table before calling WMI with WMI_VRING_CFG_CMDID
since firmware may generate events during this call; and events need translation
table filled to be properly dispatched

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wil6210/txrx.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index baced1bca04c..9b4388b842a2 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -610,6 +610,9 @@ int wil_vring_init_tx(struct wil6210_priv *wil, int id, int size,
 	if (rc)
 		goto out;
 
+	wil->vring2cid_tid[id][0] = cid;
+	wil->vring2cid_tid[id][1] = tid;
+
 	cmd.vring_cfg.tx_sw_ring.ring_mem_base = cpu_to_le64(vring->pa);
 
 	rc = wmi_call(wil, WMI_VRING_CFG_CMDID, &cmd, sizeof(cmd),
@@ -625,9 +628,6 @@ int wil_vring_init_tx(struct wil6210_priv *wil, int id, int size,
 	}
 	vring->hwtail = le32_to_cpu(reply.cmd.tx_vring_tail_ptr);
 
-	wil->vring2cid_tid[id][0] = cid;
-	wil->vring2cid_tid[id][1] = tid;
-
 	return 0;
  out_free:
 	wil_vring_free(wil, vring, 1);
-- 
cgit v1.2.2


From b8b33a3a67ef0b3ca57a647aa6966a2310ae60bb Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Thu, 27 Feb 2014 16:20:52 +0200
Subject: wil6210: Provide signal strength indication

When notifying about Rx mgmt (ex: during scan), extract
signal strength reported by the hardware.
signal is not MBM, it is arbitrary units 0..100

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wil6210/cfg80211.c |  7 ++++---
 drivers/net/wireless/ath/wil6210/wmi.c      | 12 ++++++------
 2 files changed, 10 insertions(+), 9 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index 12e0539c8eff..c19e8954d8b3 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -125,12 +125,13 @@ static int wil_cid_fill_sinfo(struct wil6210_priv *wil, int cid,
 
 	wil_dbg_wmi(wil, "Link status for CID %d: {\n"
 		    "  MCS %d TSF 0x%016llx\n"
-		    "  BF status 0x%08x SNR 0x%08x\n"
+		    "  BF status 0x%08x SNR 0x%08x SQI %d%%\n"
 		    "  Tx Tpt %d goodput %d Rx goodput %d\n"
 		    "  Sectors(rx:tx) my %d:%d peer %d:%d\n""}\n",
 		    cid, le16_to_cpu(reply.evt.bf_mcs),
 		    le64_to_cpu(reply.evt.tsf), reply.evt.status,
 		    le32_to_cpu(reply.evt.snr_val),
+		    reply.evt.sqi,
 		    le32_to_cpu(reply.evt.tx_tpt),
 		    le32_to_cpu(reply.evt.tx_goodput),
 		    le32_to_cpu(reply.evt.rx_goodput),
@@ -163,7 +164,7 @@ static int wil_cid_fill_sinfo(struct wil6210_priv *wil, int cid,
 
 	if (test_bit(wil_status_fwconnected, &wil->status)) {
 		sinfo->filled |= STATION_INFO_SIGNAL;
-		sinfo->signal = 12; /* TODO: provide real value */
+		sinfo->signal = reply.evt.sqi;
 	}
 
 	return rc;
@@ -698,7 +699,7 @@ static void wil_wiphy_init(struct wiphy *wiphy)
 	wiphy->bands[IEEE80211_BAND_60GHZ] = &wil_band_60ghz;
 
 	/* TODO: figure this out */
-	wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
+	wiphy->signal_type = CFG80211_SIGNAL_TYPE_UNSPEC;
 
 	wiphy->cipher_suites = wil_cipher_suites;
 	wiphy->n_cipher_suites = ARRAY_SIZE(wil_cipher_suites);
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index 8de7ffdc0f29..70b3a9b20450 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -307,14 +307,14 @@ static void wmi_evt_rx_mgmt(struct wil6210_priv *wil, int id, void *d, int len)
 	u32 freq = ieee80211_channel_to_frequency(ch_no,
 			IEEE80211_BAND_60GHZ);
 	struct ieee80211_channel *channel = ieee80211_get_channel(wiphy, freq);
-	/* TODO convert LE to CPU */
-	s32 signal = 0; /* TODO */
+	s32 signal = data->info.sqi;
 	__le16 fc = rx_mgmt_frame->frame_control;
 	u32 d_len = le32_to_cpu(data->info.len);
 	u16 d_status = le16_to_cpu(data->info.status);
 
-	wil_dbg_wmi(wil, "MGMT: channel %d MCS %d SNR %d\n",
-		    data->info.channel, data->info.mcs, data->info.snr);
+	wil_dbg_wmi(wil, "MGMT: channel %d MCS %d SNR %d SQI %d%%\n",
+		    data->info.channel, data->info.mcs, data->info.snr,
+		    data->info.sqi);
 	wil_dbg_wmi(wil, "status 0x%04x len %d fc 0x%04x\n", d_status, d_len,
 		    le16_to_cpu(fc));
 	wil_dbg_wmi(wil, "qid %d mid %d cid %d\n",
@@ -487,11 +487,11 @@ static void wmi_evt_notify(struct wil6210_priv *wil, int id, void *d, int len)
 	wil->stats.peer_rx_sector = le16_to_cpu(evt->other_rx_sector);
 	wil->stats.peer_tx_sector = le16_to_cpu(evt->other_tx_sector);
 	wil_dbg_wmi(wil, "Link status, MCS %d TSF 0x%016llx\n"
-		    "BF status 0x%08x SNR 0x%08x\n"
+		    "BF status 0x%08x SNR 0x%08x SQI %d%%\n"
 		    "Tx Tpt %d goodput %d Rx goodput %d\n"
 		    "Sectors(rx:tx) my %d:%d peer %d:%d\n",
 		    wil->stats.bf_mcs, wil->stats.tsf, evt->status,
-		    wil->stats.snr, le32_to_cpu(evt->tx_tpt),
+		    wil->stats.snr, evt->sqi, le32_to_cpu(evt->tx_tpt),
 		    le32_to_cpu(evt->tx_goodput), le32_to_cpu(evt->rx_goodput),
 		    wil->stats.my_rx_sector, wil->stats.my_tx_sector,
 		    wil->stats.peer_rx_sector, wil->stats.peer_tx_sector);
-- 
cgit v1.2.2


From 108d1eb612d4f4094dc5dea11521f0b9b02622e4 Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Thu, 27 Feb 2014 16:20:53 +0200
Subject: wil6210: use ether_addr_equal

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wil6210/main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index 361c693270cc..a0ea135efd11 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -16,6 +16,7 @@
 
 #include <linux/moduleparam.h>
 #include <linux/if_arp.h>
+#include <linux/etherdevice.h>
 
 #include "wil6210.h"
 #include "txrx.h"
@@ -436,7 +437,7 @@ int wil_find_cid(struct wil6210_priv *wil, const u8 *mac)
 
 	for (i = 0; i < ARRAY_SIZE(wil->sta); i++) {
 		if ((wil->sta[i].status != wil_sta_unused) &&
-		    (0 == memcmp(wil->sta[i].addr, mac, ETH_ALEN))) {
+		    ether_addr_equal(wil->sta[i].addr, mac)) {
 			rc = i;
 			break;
 		}
-- 
cgit v1.2.2


From 4d55a0a1a8efb3fef4205b7d9464428a90f2fac4 Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Thu, 27 Feb 2014 16:20:54 +0200
Subject: wil6210: single station disconnect

implement del_station() method in the struct cfg80211_ops
It allows to disconnect single peer from the AP

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wil6210/cfg80211.c |  9 +++++++++
 drivers/net/wireless/ath/wil6210/main.c     |  6 ++++++
 drivers/net/wireless/ath/wil6210/wil6210.h  |  1 +
 drivers/net/wireless/ath/wil6210/wmi.c      | 21 ++++++++++++++-------
 4 files changed, 30 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index c19e8954d8b3..a4da064dbbc4 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -657,6 +657,14 @@ static int wil_cfg80211_stop_ap(struct wiphy *wiphy,
 	return rc;
 }
 
+static int wil_cfg80211_del_station(struct wiphy *wiphy,
+				    struct net_device *dev, u8 *mac)
+{
+	struct wil6210_priv *wil = wiphy_to_wil(wiphy);
+	wil6210_disconnect(wil, mac);
+	return 0;
+}
+
 static struct cfg80211_ops wil_cfg80211_ops = {
 	.scan = wil_cfg80211_scan,
 	.connect = wil_cfg80211_connect,
@@ -674,6 +682,7 @@ static struct cfg80211_ops wil_cfg80211_ops = {
 	/* AP mode */
 	.start_ap = wil_cfg80211_start_ap,
 	.stop_ap = wil_cfg80211_stop_ap,
+	.del_station = wil_cfg80211_del_station,
 };
 
 static void wil_wiphy_init(struct wiphy *wiphy)
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index a0ea135efd11..41c362dee032 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -58,6 +58,12 @@ static void wil_disconnect_cid(struct wil6210_priv *wil, int cid)
 {
 	uint i;
 	struct wil_sta_info *sta = &wil->sta[cid];
+
+	if (sta->status != wil_sta_unused) {
+		wmi_disconnect_sta(wil, sta->addr, WLAN_REASON_DEAUTH_LEAVING);
+		sta->status = wil_sta_unused;
+	}
+
 	for (i = 0; i < WIL_STA_TID_NUM; i++) {
 		struct wil_tid_ampdu_rx *r = sta->tid_rx[i];
 		sta->tid_rx[i] = NULL;
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index b64175aae1dd..980dccc82b32 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -437,6 +437,7 @@ int wmi_rx_chain_add(struct wil6210_priv *wil, struct vring *vring);
 int wmi_p2p_cfg(struct wil6210_priv *wil, int channel);
 int wmi_rxon(struct wil6210_priv *wil, bool on);
 int wmi_get_temperature(struct wil6210_priv *wil, u32 *t_m, u32 *t_r);
+int wmi_disconnect_sta(struct wil6210_priv *wil, const u8 *mac, u16 reason);
 
 int wil6210_init_irq(struct wil6210_priv *wil, int irq);
 void wil6210_fini_irq(struct wil6210_priv *wil, int irq);
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index 70b3a9b20450..24eed0963581 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -455,19 +455,14 @@ static void wmi_evt_disconnect(struct wil6210_priv *wil, int id,
 			       void *d, int len)
 {
 	struct wmi_disconnect_event *evt = d;
-	int cid = wil_find_cid(wil, evt->bssid);
 
-	wil_dbg_wmi(wil, "Disconnect %pM CID %d reason %d proto %d wmi\n",
-		    evt->bssid, cid,
+	wil_dbg_wmi(wil, "Disconnect %pM reason %d proto %d wmi\n",
+		    evt->bssid,
 		    evt->protocol_reason_status, evt->disconnect_reason);
 
 	wil->sinfo_gen++;
 
-	/* TODO: fix for multiple connections */
-
 	wil6210_disconnect(wil, evt->bssid);
-	if (cid >= 0)
-		wil->sta[cid].status = wil_sta_unused;
 }
 
 static void wmi_evt_notify(struct wil6210_priv *wil, int id, void *d, int len)
@@ -1062,6 +1057,18 @@ int wmi_get_temperature(struct wil6210_priv *wil, u32 *t_m, u32 *t_r)
 	return 0;
 }
 
+int wmi_disconnect_sta(struct wil6210_priv *wil, const u8 *mac, u16 reason)
+{
+	struct wmi_disconnect_sta_cmd cmd = {
+		.disconnect_reason = cpu_to_le16(reason),
+	};
+	memcpy(cmd.dst_mac, mac, ETH_ALEN);
+
+	wil_dbg_wmi(wil, "%s(%pM, reason %d)\n", __func__, mac, reason);
+
+	return wmi_send(wil, WMI_DISCONNECT_STA_CMDID, &cmd, sizeof(cmd));
+}
+
 void wmi_event_flush(struct wil6210_priv *wil)
 {
 	struct pending_wmi_event *evt, *t;
-- 
cgit v1.2.2


From 0bbc4adebdb3ced39e53955f03153f4718cc3a81 Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Thu, 27 Feb 2014 16:20:55 +0200
Subject: wil6210: do not reorder groupcast Rx

Groupcast frames are not subject for BACK reordering because they are not
ACK'ed and one can't request re-transmitt

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wil6210/txrx.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index 9b4388b842a2..092081e209da 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -529,8 +529,14 @@ void wil_rx_handle(struct wil6210_priv *wil, int *quota)
 			skb->protocol = htons(ETH_P_802_2);
 			wil_netif_rx_any(skb, ndev);
 		} else {
+			struct ethhdr *eth = (void *)skb->data;
+
 			skb->protocol = eth_type_trans(skb, ndev);
-			wil_rx_reorder(wil, skb);
+
+			if (is_unicast_ether_addr(eth->h_dest))
+				wil_rx_reorder(wil, skb);
+			else
+				wil_netif_rx_any(skb, ndev);
 		}
 
 	}
-- 
cgit v1.2.2


From 6b7dce12b3e810a107735ab9e701f2be4e75db29 Mon Sep 17 00:00:00 2001
From: Heinrich Schuchardt <xypron.glpk@gmx.de>
Date: Thu, 27 Feb 2014 17:06:58 +0100
Subject: rtlwifi: Remove redundant if clause

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtlwifi/rtl8192se/rf.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/rf.c b/drivers/net/wireless/rtlwifi/rtl8192se/rf.c
index 92d38ab3c60e..78a81c1e390b 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192se/rf.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/rf.c
@@ -52,7 +52,7 @@ static void _rtl92s_get_powerbase(struct ieee80211_hw *hw, u8 *p_pwrlevel,
 	/* We only care about the path A for legacy. */
 	if (rtlefuse->eeprom_version < 2) {
 		pwrbase0 = pwrlevel[0] + (rtlefuse->legacy_httxpowerdiff & 0xf);
-	} else if (rtlefuse->eeprom_version >= 2) {
+	} else {
 		legacy_pwrdiff = rtlefuse->txpwr_legacyhtdiff
 						[RF90_PATH_A][chnl - 1];
 
-- 
cgit v1.2.2


From fa0ecbb9905d985a77e76801ba1153394ba593e8 Mon Sep 17 00:00:00 2001
From: Bing Zhao <bzhao@marvell.com>
Date: Thu, 27 Feb 2014 19:35:12 -0800
Subject: mwifiex: remove global variable cmd_wait_q_required

There is a race condition while queuing synchronous command and
asynchronous command requested from different threads, because
the wait_q_enabled flag is set based on a global variable
cmd_wait_q_required.

The issue is fixed by removing this global variable and using a
unified function with an argument 'sync' passed into the
function.

Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/11h.c           |   4 +-
 drivers/net/wireless/mwifiex/11n.c           |   8 +-
 drivers/net/wireless/mwifiex/11n_rxreorder.c |   2 +-
 drivers/net/wireless/mwifiex/cfg80211.c      | 167 +++++++++++++--------------
 drivers/net/wireless/mwifiex/cmdevt.c        |  36 ++----
 drivers/net/wireless/mwifiex/ie.c            |   6 +-
 drivers/net/wireless/mwifiex/join.c          |  37 +++---
 drivers/net/wireless/mwifiex/main.c          |   5 +-
 drivers/net/wireless/mwifiex/main.h          |   8 +-
 drivers/net/wireless/mwifiex/scan.c          |   4 +-
 drivers/net/wireless/mwifiex/sta_cmd.c       |  84 +++++++-------
 drivers/net/wireless/mwifiex/sta_cmdresp.c   |   9 +-
 drivers/net/wireless/mwifiex/sta_event.c     |  38 +++---
 drivers/net/wireless/mwifiex/sta_ioctl.c     | 117 +++++++++----------
 drivers/net/wireless/mwifiex/tdls.c          |  16 +--
 drivers/net/wireless/mwifiex/uap_cmd.c       |   4 +-
 drivers/net/wireless/mwifiex/uap_event.c     |   6 +-
 drivers/net/wireless/mwifiex/util.c          |   2 +-
 18 files changed, 255 insertions(+), 298 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/11h.c b/drivers/net/wireless/mwifiex/11h.c
index 8d683070bdb3..e76b0db4e3e6 100644
--- a/drivers/net/wireless/mwifiex/11h.c
+++ b/drivers/net/wireless/mwifiex/11h.c
@@ -73,8 +73,8 @@ static int mwifiex_11h_activate(struct mwifiex_private *priv, bool flag)
 {
 	u32 enable = flag;
 
-	return mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_SNMP_MIB,
-				     HostCmd_ACT_GEN_SET, DOT11H_I, &enable);
+	return mwifiex_send_cmd(priv, HostCmd_CMD_802_11_SNMP_MIB,
+				HostCmd_ACT_GEN_SET, DOT11H_I, &enable, true);
 }
 
 /* This functions processes TLV buffer for a pending BSS Join command.
diff --git a/drivers/net/wireless/mwifiex/11n.c b/drivers/net/wireless/mwifiex/11n.c
index 37677af8d2fc..79ead928a64e 100644
--- a/drivers/net/wireless/mwifiex/11n.c
+++ b/drivers/net/wireless/mwifiex/11n.c
@@ -574,8 +574,8 @@ int mwifiex_send_addba(struct mwifiex_private *priv, int tid, u8 *peer_mac)
 	memcpy(&add_ba_req.peer_mac_addr, peer_mac, ETH_ALEN);
 
 	/* We don't wait for the response of this command */
-	ret = mwifiex_send_cmd_async(priv, HostCmd_CMD_11N_ADDBA_REQ,
-				     0, 0, &add_ba_req);
+	ret = mwifiex_send_cmd(priv, HostCmd_CMD_11N_ADDBA_REQ,
+			       0, 0, &add_ba_req, false);
 
 	return ret;
 }
@@ -602,8 +602,8 @@ int mwifiex_send_delba(struct mwifiex_private *priv, int tid, u8 *peer_mac,
 	memcpy(&delba.peer_mac_addr, peer_mac, ETH_ALEN);
 
 	/* We don't wait for the response of this command */
-	ret = mwifiex_send_cmd_async(priv, HostCmd_CMD_11N_DELBA,
-				     HostCmd_ACT_GEN_SET, 0, &delba);
+	ret = mwifiex_send_cmd(priv, HostCmd_CMD_11N_DELBA,
+			       HostCmd_ACT_GEN_SET, 0, &delba, false);
 
 	return ret;
 }
diff --git a/drivers/net/wireless/mwifiex/11n_rxreorder.c b/drivers/net/wireless/mwifiex/11n_rxreorder.c
index 35329cfc9a9b..c3323c492614 100644
--- a/drivers/net/wireless/mwifiex/11n_rxreorder.c
+++ b/drivers/net/wireless/mwifiex/11n_rxreorder.c
@@ -650,7 +650,7 @@ void mwifiex_11n_ba_stream_timeout(struct mwifiex_private *priv,
 	delba.del_ba_param_set |= cpu_to_le16(
 		(u16) event->origninator << DELBA_INITIATOR_POS);
 	delba.reason_code = cpu_to_le16(WLAN_REASON_QSTA_TIMEOUT);
-	mwifiex_send_cmd_async(priv, HostCmd_CMD_11N_DELBA, 0, 0, &delba);
+	mwifiex_send_cmd(priv, HostCmd_CMD_11N_DELBA, 0, 0, &delba, false);
 }
 
 /*
diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index 68c51a8e5bea..bfe9316e196c 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -252,9 +252,9 @@ mwifiex_cfg80211_mgmt_frame_register(struct wiphy *wiphy,
 
 	if (mask != priv->mgmt_frame_mask) {
 		priv->mgmt_frame_mask = mask;
-		mwifiex_send_cmd_async(priv, HostCmd_CMD_MGMT_FRAME_REG,
-				       HostCmd_ACT_GEN_SET, 0,
-				       &priv->mgmt_frame_mask);
+		mwifiex_send_cmd(priv, HostCmd_CMD_MGMT_FRAME_REG,
+				 HostCmd_ACT_GEN_SET, 0,
+				 &priv->mgmt_frame_mask, false);
 		wiphy_dbg(wiphy, "info: mgmt frame registered\n");
 	}
 }
@@ -515,8 +515,8 @@ static int mwifiex_send_domain_info_cmd_fw(struct wiphy *wiphy)
 
 	priv = mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY);
 
-	if (mwifiex_send_cmd_async(priv, HostCmd_CMD_802_11D_DOMAIN_INFO,
-				   HostCmd_ACT_GEN_SET, 0, NULL)) {
+	if (mwifiex_send_cmd(priv, HostCmd_CMD_802_11D_DOMAIN_INFO,
+			     HostCmd_ACT_GEN_SET, 0, NULL, false)) {
 		wiphy_err(wiphy, "11D: setting domain info in FW\n");
 		return -1;
 	}
@@ -580,9 +580,9 @@ mwifiex_set_frag(struct mwifiex_private *priv, u32 frag_thr)
 	    frag_thr > MWIFIEX_FRAG_MAX_VALUE)
 		frag_thr = MWIFIEX_FRAG_MAX_VALUE;
 
-	return mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_SNMP_MIB,
-				     HostCmd_ACT_GEN_SET, FRAG_THRESH_I,
-				     &frag_thr);
+	return mwifiex_send_cmd(priv, HostCmd_CMD_802_11_SNMP_MIB,
+				HostCmd_ACT_GEN_SET, FRAG_THRESH_I,
+				&frag_thr, true);
 }
 
 /*
@@ -597,9 +597,9 @@ mwifiex_set_rts(struct mwifiex_private *priv, u32 rts_thr)
 	if (rts_thr < MWIFIEX_RTS_MIN_VALUE || rts_thr > MWIFIEX_RTS_MAX_VALUE)
 		rts_thr = MWIFIEX_RTS_MAX_VALUE;
 
-	return mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_SNMP_MIB,
-				    HostCmd_ACT_GEN_SET, RTS_THRESH_I,
-				    &rts_thr);
+	return mwifiex_send_cmd(priv, HostCmd_CMD_802_11_SNMP_MIB,
+				HostCmd_ACT_GEN_SET, RTS_THRESH_I,
+				&rts_thr, true);
 }
 
 /*
@@ -637,20 +637,19 @@ mwifiex_cfg80211_set_wiphy_params(struct wiphy *wiphy, u32 changed)
 
 			bss_started = priv->bss_started;
 
-			ret = mwifiex_send_cmd_sync(priv,
-						    HostCmd_CMD_UAP_BSS_STOP,
-						    HostCmd_ACT_GEN_SET, 0,
-						    NULL);
+			ret = mwifiex_send_cmd(priv, HostCmd_CMD_UAP_BSS_STOP,
+					       HostCmd_ACT_GEN_SET, 0,
+					       NULL, true);
 			if (ret) {
 				wiphy_err(wiphy, "Failed to stop the BSS\n");
 				kfree(bss_cfg);
 				return ret;
 			}
 
-			ret = mwifiex_send_cmd_async(priv,
-						     HostCmd_CMD_UAP_SYS_CONFIG,
-						     HostCmd_ACT_GEN_SET,
-						     UAP_BSS_PARAMS_I, bss_cfg);
+			ret = mwifiex_send_cmd(priv, HostCmd_CMD_UAP_SYS_CONFIG,
+					       HostCmd_ACT_GEN_SET,
+					       UAP_BSS_PARAMS_I, bss_cfg,
+					       false);
 
 			kfree(bss_cfg);
 
@@ -662,10 +661,9 @@ mwifiex_cfg80211_set_wiphy_params(struct wiphy *wiphy, u32 changed)
 			if (!bss_started)
 				break;
 
-			ret = mwifiex_send_cmd_async(priv,
-						     HostCmd_CMD_UAP_BSS_START,
-						     HostCmd_ACT_GEN_SET, 0,
-						     NULL);
+			ret = mwifiex_send_cmd(priv, HostCmd_CMD_UAP_BSS_START,
+					       HostCmd_ACT_GEN_SET, 0,
+					       NULL, false);
 			if (ret) {
 				wiphy_err(wiphy, "Failed to start BSS\n");
 				return ret;
@@ -700,8 +698,8 @@ mwifiex_cfg80211_deinit_p2p(struct mwifiex_private *priv)
 	if (GET_BSS_ROLE(priv) != MWIFIEX_BSS_ROLE_STA)
 		mwifiex_set_bss_role(priv, MWIFIEX_BSS_ROLE_STA);
 
-	if (mwifiex_send_cmd_sync(priv, HostCmd_CMD_P2P_MODE_CFG,
-				  HostCmd_ACT_GEN_SET, 0, &mode))
+	if (mwifiex_send_cmd(priv, HostCmd_CMD_P2P_MODE_CFG,
+			     HostCmd_ACT_GEN_SET, 0, &mode, true))
 		return -1;
 
 	return 0;
@@ -721,13 +719,13 @@ mwifiex_cfg80211_init_p2p_client(struct mwifiex_private *priv)
 		return -1;
 
 	mode = P2P_MODE_DEVICE;
-	if (mwifiex_send_cmd_sync(priv, HostCmd_CMD_P2P_MODE_CFG,
-				  HostCmd_ACT_GEN_SET, 0, &mode))
+	if (mwifiex_send_cmd(priv, HostCmd_CMD_P2P_MODE_CFG,
+			     HostCmd_ACT_GEN_SET, 0, &mode, true))
 		return -1;
 
 	mode = P2P_MODE_CLIENT;
-	if (mwifiex_send_cmd_sync(priv, HostCmd_CMD_P2P_MODE_CFG,
-				  HostCmd_ACT_GEN_SET, 0, &mode))
+	if (mwifiex_send_cmd(priv, HostCmd_CMD_P2P_MODE_CFG,
+			     HostCmd_ACT_GEN_SET, 0, &mode, true))
 		return -1;
 
 	return 0;
@@ -747,13 +745,13 @@ mwifiex_cfg80211_init_p2p_go(struct mwifiex_private *priv)
 		return -1;
 
 	mode = P2P_MODE_DEVICE;
-	if (mwifiex_send_cmd_sync(priv, HostCmd_CMD_P2P_MODE_CFG,
-				  HostCmd_ACT_GEN_SET, 0, &mode))
+	if (mwifiex_send_cmd(priv, HostCmd_CMD_P2P_MODE_CFG,
+			     HostCmd_ACT_GEN_SET, 0, &mode, true))
 		return -1;
 
 	mode = P2P_MODE_GO;
-	if (mwifiex_send_cmd_sync(priv, HostCmd_CMD_P2P_MODE_CFG,
-				  HostCmd_ACT_GEN_SET, 0, &mode))
+	if (mwifiex_send_cmd(priv, HostCmd_CMD_P2P_MODE_CFG,
+			     HostCmd_ACT_GEN_SET, 0, &mode, true))
 		return -1;
 
 	if (GET_BSS_ROLE(priv) != MWIFIEX_BSS_ROLE_UAP)
@@ -853,8 +851,8 @@ mwifiex_cfg80211_change_virtual_intf(struct wiphy *wiphy,
 
 	priv->sec_info.authentication_mode = NL80211_AUTHTYPE_OPEN_SYSTEM;
 
-	ret = mwifiex_send_cmd_sync(priv, HostCmd_CMD_SET_BSS_MODE,
-				    HostCmd_ACT_GEN_SET, 0, NULL);
+	ret = mwifiex_send_cmd(priv, HostCmd_CMD_SET_BSS_MODE,
+			       HostCmd_ACT_GEN_SET, 0, NULL, true);
 
 	return ret;
 }
@@ -942,8 +940,8 @@ mwifiex_dump_station_info(struct mwifiex_private *priv,
 			STATION_INFO_SIGNAL | STATION_INFO_SIGNAL_AVG;
 
 	/* Get signal information from the firmware */
-	if (mwifiex_send_cmd_sync(priv, HostCmd_CMD_RSSI_INFO,
-				  HostCmd_ACT_GEN_GET, 0, NULL)) {
+	if (mwifiex_send_cmd(priv, HostCmd_CMD_RSSI_INFO,
+			     HostCmd_ACT_GEN_GET, 0, NULL, true)) {
 		dev_err(priv->adapter->dev, "failed to get signal information\n");
 		return -EFAULT;
 	}
@@ -954,9 +952,9 @@ mwifiex_dump_station_info(struct mwifiex_private *priv,
 	}
 
 	/* Get DTIM period information from firmware */
-	mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_SNMP_MIB,
-			      HostCmd_ACT_GEN_GET, DTIM_PERIOD_I,
-			      &priv->dtim_period);
+	mwifiex_send_cmd(priv, HostCmd_CMD_802_11_SNMP_MIB,
+			 HostCmd_ACT_GEN_GET, DTIM_PERIOD_I,
+			 &priv->dtim_period, true);
 
 	mwifiex_parse_htinfo(priv, priv->tx_htinfo, &sinfo->txrate);
 
@@ -1186,8 +1184,8 @@ static int mwifiex_cfg80211_set_bitrate_mask(struct wiphy *wiphy,
 	if (priv->adapter->hw_dev_mcs_support == HT_STREAM_2X2)
 		bitmap_rates[2] |= mask->control[band].ht_mcs[1] << 8;
 
-	return mwifiex_send_cmd_sync(priv, HostCmd_CMD_TX_RATE_CFG,
-				     HostCmd_ACT_GEN_SET, 0, bitmap_rates);
+	return mwifiex_send_cmd(priv, HostCmd_CMD_TX_RATE_CFG,
+				HostCmd_ACT_GEN_SET, 0, bitmap_rates, true);
 }
 
 /*
@@ -1216,14 +1214,14 @@ static int mwifiex_cfg80211_set_cqm_rssi_config(struct wiphy *wiphy,
 		subsc_evt.bcn_h_rssi_cfg.abs_value = abs(rssi_thold);
 		subsc_evt.bcn_l_rssi_cfg.evt_freq = 1;
 		subsc_evt.bcn_h_rssi_cfg.evt_freq = 1;
-		return mwifiex_send_cmd_sync(priv,
-					     HostCmd_CMD_802_11_SUBSCRIBE_EVENT,
-					     0, 0, &subsc_evt);
+		return mwifiex_send_cmd(priv,
+					HostCmd_CMD_802_11_SUBSCRIBE_EVENT,
+					0, 0, &subsc_evt, true);
 	} else {
 		subsc_evt.action = HostCmd_ACT_BITWISE_CLR;
-		return mwifiex_send_cmd_sync(priv,
-					     HostCmd_CMD_802_11_SUBSCRIBE_EVENT,
-					     0, 0, &subsc_evt);
+		return mwifiex_send_cmd(priv,
+					HostCmd_CMD_802_11_SUBSCRIBE_EVENT,
+					0, 0, &subsc_evt, true);
 	}
 
 	return 0;
@@ -1276,10 +1274,9 @@ mwifiex_cfg80211_del_station(struct wiphy *wiphy, struct net_device *dev,
 	if (!mac || is_broadcast_ether_addr(mac)) {
 		wiphy_dbg(wiphy, "%s: NULL/broadcast mac address\n", __func__);
 		list_for_each_entry(sta_node, &priv->sta_list, list) {
-			if (mwifiex_send_cmd_sync(priv,
-						  HostCmd_CMD_UAP_STA_DEAUTH,
-						  HostCmd_ACT_GEN_SET, 0,
-						  sta_node->mac_addr))
+			if (mwifiex_send_cmd(priv, HostCmd_CMD_UAP_STA_DEAUTH,
+					     HostCmd_ACT_GEN_SET, 0,
+					     sta_node->mac_addr, true))
 				return -1;
 			mwifiex_uap_del_sta_data(priv, sta_node);
 		}
@@ -1289,10 +1286,9 @@ mwifiex_cfg80211_del_station(struct wiphy *wiphy, struct net_device *dev,
 		sta_node = mwifiex_get_sta_entry(priv, mac);
 		spin_unlock_irqrestore(&priv->sta_list_spinlock, flags);
 		if (sta_node) {
-			if (mwifiex_send_cmd_sync(priv,
-						  HostCmd_CMD_UAP_STA_DEAUTH,
-						  HostCmd_ACT_GEN_SET, 0,
-						  sta_node->mac_addr))
+			if (mwifiex_send_cmd(priv, HostCmd_CMD_UAP_STA_DEAUTH,
+					     HostCmd_ACT_GEN_SET, 0,
+					     sta_node->mac_addr, true))
 				return -1;
 			mwifiex_uap_del_sta_data(priv, sta_node);
 		}
@@ -1333,8 +1329,8 @@ mwifiex_cfg80211_set_antenna(struct wiphy *wiphy, u32 tx_ant, u32 rx_ant)
 	ant_cfg.tx_ant = tx_ant;
 	ant_cfg.rx_ant = rx_ant;
 
-	return mwifiex_send_cmd_sync(priv, HostCmd_CMD_RF_ANTENNA,
-				     HostCmd_ACT_GEN_SET, 0, &ant_cfg);
+	return mwifiex_send_cmd(priv, HostCmd_CMD_RF_ANTENNA,
+				HostCmd_ACT_GEN_SET, 0, &ant_cfg, true);
 }
 
 /* cfg80211 operation handler for stop ap.
@@ -1349,8 +1345,8 @@ static int mwifiex_cfg80211_stop_ap(struct wiphy *wiphy, struct net_device *dev)
 
 	priv->ap_11n_enabled = 0;
 
-	if (mwifiex_send_cmd_sync(priv, HostCmd_CMD_UAP_BSS_STOP,
-				  HostCmd_ACT_GEN_SET, 0, NULL)) {
+	if (mwifiex_send_cmd(priv, HostCmd_CMD_UAP_BSS_STOP,
+			     HostCmd_ACT_GEN_SET, 0, NULL, true)) {
 		wiphy_err(wiphy, "Failed to stop the BSS\n");
 		return -1;
 	}
@@ -1461,16 +1457,16 @@ static int mwifiex_cfg80211_start_ap(struct wiphy *wiphy,
 		bss_cfg->ps_sta_ao_timer = 10 * params->inactivity_timeout;
 	}
 
-	if (mwifiex_send_cmd_sync(priv, HostCmd_CMD_UAP_BSS_STOP,
-				  HostCmd_ACT_GEN_SET, 0, NULL)) {
+	if (mwifiex_send_cmd(priv, HostCmd_CMD_UAP_BSS_STOP,
+			     HostCmd_ACT_GEN_SET, 0, NULL, true)) {
 		wiphy_err(wiphy, "Failed to stop the BSS\n");
 		kfree(bss_cfg);
 		return -1;
 	}
 
-	if (mwifiex_send_cmd_async(priv, HostCmd_CMD_UAP_SYS_CONFIG,
-				   HostCmd_ACT_GEN_SET,
-				   UAP_BSS_PARAMS_I, bss_cfg)) {
+	if (mwifiex_send_cmd(priv, HostCmd_CMD_UAP_SYS_CONFIG,
+			     HostCmd_ACT_GEN_SET,
+			     UAP_BSS_PARAMS_I, bss_cfg, false)) {
 		wiphy_err(wiphy, "Failed to set the SSID\n");
 		kfree(bss_cfg);
 		return -1;
@@ -1478,8 +1474,8 @@ static int mwifiex_cfg80211_start_ap(struct wiphy *wiphy,
 
 	kfree(bss_cfg);
 
-	if (mwifiex_send_cmd_async(priv, HostCmd_CMD_UAP_BSS_START,
-				   HostCmd_ACT_GEN_SET, 0, NULL)) {
+	if (mwifiex_send_cmd(priv, HostCmd_CMD_UAP_BSS_START,
+			     HostCmd_ACT_GEN_SET, 0, NULL, false)) {
 		wiphy_err(wiphy, "Failed to start the BSS\n");
 		return -1;
 	}
@@ -1489,9 +1485,9 @@ static int mwifiex_cfg80211_start_ap(struct wiphy *wiphy,
 	else
 		priv->curr_pkt_filter &= ~HostCmd_ACT_MAC_WEP_ENABLE;
 
-	if (mwifiex_send_cmd_sync(priv, HostCmd_CMD_MAC_CONTROL,
-				  HostCmd_ACT_GEN_SET, 0,
-				  &priv->curr_pkt_filter))
+	if (mwifiex_send_cmd(priv, HostCmd_CMD_MAC_CONTROL,
+			     HostCmd_ACT_GEN_SET, 0,
+			     &priv->curr_pkt_filter, true))
 		return -1;
 
 	return 0;
@@ -2459,9 +2455,8 @@ static int mwifiex_cfg80211_suspend(struct wiphy *wiphy,
 				   MWIFIEX_CRITERIA_UNICAST |
 				   MWIFIEX_CRITERIA_MULTICAST;
 
-	ret =  mwifiex_send_cmd_sync(priv, HostCmd_CMD_MEF_CFG,
-				     HostCmd_ACT_GEN_SET, 0,
-				     &mef_cfg);
+	ret = mwifiex_send_cmd(priv, HostCmd_CMD_MEF_CFG,
+			       HostCmd_ACT_GEN_SET, 0, &mef_cfg, true);
 
 	kfree(mef_entry);
 	return ret;
@@ -2573,9 +2568,9 @@ static int mwifiex_cfg80211_set_coalesce(struct wiphy *wiphy,
 	if (!coalesce) {
 		dev_dbg(adapter->dev,
 			"Disable coalesce and reset all previous rules\n");
-		return mwifiex_send_cmd_sync(priv, HostCmd_CMD_COALESCE_CFG,
-					     HostCmd_ACT_GEN_SET, 0,
-					     &coalesce_cfg);
+		return mwifiex_send_cmd(priv, HostCmd_CMD_COALESCE_CFG,
+					HostCmd_ACT_GEN_SET, 0,
+					&coalesce_cfg, true);
 	}
 
 	coalesce_cfg.num_of_rules = coalesce->n_rules;
@@ -2590,8 +2585,8 @@ static int mwifiex_cfg80211_set_coalesce(struct wiphy *wiphy,
 		}
 	}
 
-	return mwifiex_send_cmd_sync(priv, HostCmd_CMD_COALESCE_CFG,
-				     HostCmd_ACT_GEN_SET, 0, &coalesce_cfg);
+	return mwifiex_send_cmd(priv, HostCmd_CMD_COALESCE_CFG,
+				HostCmd_ACT_GEN_SET, 0, &coalesce_cfg, true);
 }
 
 /* cfg80211 ops handler for tdls_mgmt.
@@ -2940,17 +2935,17 @@ int mwifiex_register_cfg80211(struct mwifiex_adapter *adapter)
 				   country_code);
 	}
 
-	mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_SNMP_MIB,
-			      HostCmd_ACT_GEN_GET, FRAG_THRESH_I, &thr);
+	mwifiex_send_cmd(priv, HostCmd_CMD_802_11_SNMP_MIB,
+			 HostCmd_ACT_GEN_GET, FRAG_THRESH_I, &thr, true);
 	wiphy->frag_threshold = thr;
-	mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_SNMP_MIB,
-			      HostCmd_ACT_GEN_GET, RTS_THRESH_I, &thr);
+	mwifiex_send_cmd(priv, HostCmd_CMD_802_11_SNMP_MIB,
+			 HostCmd_ACT_GEN_GET, RTS_THRESH_I, &thr, true);
 	wiphy->rts_threshold = thr;
-	mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_SNMP_MIB,
-			      HostCmd_ACT_GEN_GET, SHORT_RETRY_LIM_I, &retry);
+	mwifiex_send_cmd(priv, HostCmd_CMD_802_11_SNMP_MIB,
+			 HostCmd_ACT_GEN_GET, SHORT_RETRY_LIM_I, &retry, true);
 	wiphy->retry_short = (u8) retry;
-	mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_SNMP_MIB,
-			      HostCmd_ACT_GEN_GET, LONG_RETRY_LIM_I, &retry);
+	mwifiex_send_cmd(priv, HostCmd_CMD_802_11_SNMP_MIB,
+			 HostCmd_ACT_GEN_GET, LONG_RETRY_LIM_I, &retry, true);
 	wiphy->retry_long = (u8) retry;
 
 	adapter->wiphy = wiphy;
diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c
index f4faeaf322be..64e708b79f0e 100644
--- a/drivers/net/wireless/mwifiex/cmdevt.c
+++ b/drivers/net/wireless/mwifiex/cmdevt.c
@@ -37,13 +37,12 @@
 static void
 mwifiex_init_cmd_node(struct mwifiex_private *priv,
 		      struct cmd_ctrl_node *cmd_node,
-		      u32 cmd_oid, void *data_buf)
+		      u32 cmd_oid, void *data_buf, bool sync)
 {
 	cmd_node->priv = priv;
 	cmd_node->cmd_oid = cmd_oid;
-	if (priv->adapter->cmd_wait_q_required) {
-		cmd_node->wait_q_enabled = priv->adapter->cmd_wait_q_required;
-		priv->adapter->cmd_wait_q_required = false;
+	if (sync) {
+		cmd_node->wait_q_enabled = true;
 		cmd_node->cmd_wait_q_woken = false;
 		cmd_node->condition = &cmd_node->cmd_wait_q_woken;
 	}
@@ -480,28 +479,7 @@ int mwifiex_process_event(struct mwifiex_adapter *adapter)
 }
 
 /*
- * This function is used to send synchronous command to the firmware.
- *
- * it allocates a wait queue for the command and wait for the command
- * response.
- */
-int mwifiex_send_cmd_sync(struct mwifiex_private *priv, uint16_t cmd_no,
-			  u16 cmd_action, u32 cmd_oid, void *data_buf)
-{
-	int ret = 0;
-	struct mwifiex_adapter *adapter = priv->adapter;
-
-	adapter->cmd_wait_q_required = true;
-
-	ret = mwifiex_send_cmd_async(priv, cmd_no, cmd_action, cmd_oid,
-				     data_buf);
-
-	return ret;
-}
-
-
-/*
- * This function prepares a command and asynchronously send it to the firmware.
+ * This function prepares a command and send it to the firmware.
  *
  * Preparation includes -
  *      - Sanity tests to make sure the card is still present or the FW
@@ -511,8 +489,8 @@ int mwifiex_send_cmd_sync(struct mwifiex_private *priv, uint16_t cmd_no,
  *      - Fill up the non-default parameters and buffer pointers
  *      - Add the command to pending queue
  */
-int mwifiex_send_cmd_async(struct mwifiex_private *priv, uint16_t cmd_no,
-			   u16 cmd_action, u32 cmd_oid, void *data_buf)
+int mwifiex_send_cmd(struct mwifiex_private *priv, u16 cmd_no,
+		     u16 cmd_action, u32 cmd_oid, void *data_buf, bool sync)
 {
 	int ret;
 	struct mwifiex_adapter *adapter = priv->adapter;
@@ -550,7 +528,7 @@ int mwifiex_send_cmd_async(struct mwifiex_private *priv, uint16_t cmd_no,
 	}
 
 	/* Initialize the command node */
-	mwifiex_init_cmd_node(priv, cmd_node, cmd_oid, data_buf);
+	mwifiex_init_cmd_node(priv, cmd_node, cmd_oid, data_buf, sync);
 
 	if (!cmd_node->cmd_skb) {
 		dev_err(adapter->dev, "PREP_CMD: no free cmd buf\n");
diff --git a/drivers/net/wireless/mwifiex/ie.c b/drivers/net/wireless/mwifiex/ie.c
index 81ac001ee741..3bf3d58bbc02 100644
--- a/drivers/net/wireless/mwifiex/ie.c
+++ b/drivers/net/wireless/mwifiex/ie.c
@@ -138,9 +138,9 @@ mwifiex_update_autoindex_ies(struct mwifiex_private *priv,
 	}
 
 	if (GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_UAP)
-		return mwifiex_send_cmd_async(priv, HostCmd_CMD_UAP_SYS_CONFIG,
-					      HostCmd_ACT_GEN_SET,
-					      UAP_CUSTOM_IE_I, ie_list);
+		return mwifiex_send_cmd(priv, HostCmd_CMD_UAP_SYS_CONFIG,
+					HostCmd_ACT_GEN_SET,
+					UAP_CUSTOM_IE_I, ie_list, false);
 
 	return 0;
 }
diff --git a/drivers/net/wireless/mwifiex/join.c b/drivers/net/wireless/mwifiex/join.c
index 34472ea53841..e9bd43526d80 100644
--- a/drivers/net/wireless/mwifiex/join.c
+++ b/drivers/net/wireless/mwifiex/join.c
@@ -901,9 +901,9 @@ mwifiex_cmd_802_11_ad_hoc_start(struct mwifiex_private *priv,
 	mwifiex_get_active_data_rates(priv, adhoc_start->data_rate);
 	if ((adapter->adhoc_start_band & BAND_G) &&
 	    (priv->curr_pkt_filter & HostCmd_ACT_MAC_ADHOC_G_PROTECTION_ON)) {
-		if (mwifiex_send_cmd_async(priv, HostCmd_CMD_MAC_CONTROL,
-					   HostCmd_ACT_GEN_SET, 0,
-					   &priv->curr_pkt_filter)) {
+		if (mwifiex_send_cmd(priv, HostCmd_CMD_MAC_CONTROL,
+				     HostCmd_ACT_GEN_SET, 0,
+				     &priv->curr_pkt_filter, false)) {
 			dev_err(adapter->dev,
 				"ADHOC_S_CMD: G Protection config failed\n");
 			return -1;
@@ -1073,9 +1073,9 @@ mwifiex_cmd_802_11_ad_hoc_join(struct mwifiex_private *priv,
 			priv->
 			curr_pkt_filter | HostCmd_ACT_MAC_ADHOC_G_PROTECTION_ON;
 
-		if (mwifiex_send_cmd_async(priv, HostCmd_CMD_MAC_CONTROL,
-					   HostCmd_ACT_GEN_SET, 0,
-					   &curr_pkt_filter)) {
+		if (mwifiex_send_cmd(priv, HostCmd_CMD_MAC_CONTROL,
+				     HostCmd_ACT_GEN_SET, 0,
+				     &curr_pkt_filter, false)) {
 			dev_err(priv->adapter->dev,
 				"ADHOC_J_CMD: G Protection config failed\n");
 			return -1;
@@ -1312,8 +1312,8 @@ int mwifiex_associate(struct mwifiex_private *priv,
 	   retrieval */
 	priv->assoc_rsp_size = 0;
 
-	return mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_ASSOCIATE,
-				    HostCmd_ACT_GEN_SET, 0, bss_desc);
+	return mwifiex_send_cmd(priv, HostCmd_CMD_802_11_ASSOCIATE,
+				HostCmd_ACT_GEN_SET, 0, bss_desc, true);
 }
 
 /*
@@ -1338,8 +1338,8 @@ mwifiex_adhoc_start(struct mwifiex_private *priv,
 	else
 		mwifiex_set_ba_params(priv);
 
-	return mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_AD_HOC_START,
-				    HostCmd_ACT_GEN_SET, 0, adhoc_ssid);
+	return mwifiex_send_cmd(priv, HostCmd_CMD_802_11_AD_HOC_START,
+				HostCmd_ACT_GEN_SET, 0, adhoc_ssid, true);
 }
 
 /*
@@ -1383,8 +1383,8 @@ int mwifiex_adhoc_join(struct mwifiex_private *priv,
 	dev_dbg(priv->adapter->dev, "info: curr_bss_params.band = %c\n",
 		priv->curr_bss_params.band);
 
-	return mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_AD_HOC_JOIN,
-				    HostCmd_ACT_GEN_SET, 0, bss_desc);
+	return mwifiex_send_cmd(priv, HostCmd_CMD_802_11_AD_HOC_JOIN,
+				HostCmd_ACT_GEN_SET, 0, bss_desc, true);
 }
 
 /*
@@ -1403,8 +1403,8 @@ static int mwifiex_deauthenticate_infra(struct mwifiex_private *priv, u8 *mac)
 	else
 		memcpy(mac_address, mac, ETH_ALEN);
 
-	ret = mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_DEAUTHENTICATE,
-				    HostCmd_ACT_GEN_SET, 0, mac_address);
+	ret = mwifiex_send_cmd(priv, HostCmd_CMD_802_11_DEAUTHENTICATE,
+			       HostCmd_ACT_GEN_SET, 0, mac_address, true);
 
 	return ret;
 }
@@ -1432,12 +1432,11 @@ int mwifiex_deauthenticate(struct mwifiex_private *priv, u8 *mac)
 					      GFP_KERNEL);
 		break;
 	case NL80211_IFTYPE_ADHOC:
-		return mwifiex_send_cmd_sync(priv,
-					     HostCmd_CMD_802_11_AD_HOC_STOP,
-					     HostCmd_ACT_GEN_SET, 0, NULL);
+		return mwifiex_send_cmd(priv, HostCmd_CMD_802_11_AD_HOC_STOP,
+					HostCmd_ACT_GEN_SET, 0, NULL, true);
 	case NL80211_IFTYPE_AP:
-		return mwifiex_send_cmd_sync(priv, HostCmd_CMD_UAP_BSS_STOP,
-					     HostCmd_ACT_GEN_SET, 0, NULL);
+		return mwifiex_send_cmd(priv, HostCmd_CMD_UAP_BSS_STOP,
+					HostCmd_ACT_GEN_SET, 0, NULL, true);
 	default:
 		break;
 	}
diff --git a/drivers/net/wireless/mwifiex/main.c b/drivers/net/wireless/mwifiex/main.c
index f87ce28a8060..5397ee0ad652 100644
--- a/drivers/net/wireless/mwifiex/main.c
+++ b/drivers/net/wireless/mwifiex/main.c
@@ -678,8 +678,8 @@ mwifiex_set_mac_address(struct net_device *dev, void *addr)
 	memcpy(priv->curr_addr, hw_addr->sa_data, ETH_ALEN);
 
 	/* Send request to firmware */
-	ret = mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_MAC_ADDRESS,
-				    HostCmd_ACT_GEN_SET, 0, NULL);
+	ret = mwifiex_send_cmd(priv, HostCmd_CMD_802_11_MAC_ADDRESS,
+			       HostCmd_ACT_GEN_SET, 0, NULL, true);
 
 	if (!ret)
 		memcpy(priv->netdev->dev_addr, priv->curr_addr, ETH_ALEN);
@@ -871,7 +871,6 @@ mwifiex_add_card(void *card, struct semaphore *sem,
 	adapter->is_suspended = false;
 	adapter->hs_activated = false;
 	init_waitqueue_head(&adapter->hs_activate_wait_q);
-	adapter->cmd_wait_q_required = false;
 	init_waitqueue_head(&adapter->cmd_wait_q.wait);
 	adapter->cmd_wait_q.status = 0;
 	adapter->scan_wait_q_woken = false;
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index cb1148f0de69..6c04baa5bcf9 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -779,7 +779,6 @@ struct mwifiex_adapter {
 	struct mwifiex_dbg dbg;
 	u8 arp_filter[ARP_FILTER_MAX_BUF_SIZE];
 	u32 arp_filter_size;
-	u16 cmd_wait_q_required;
 	struct mwifiex_wait_queue cmd_wait_q;
 	u8 scan_wait_q_woken;
 	spinlock_t queue_lock;		/* lock for tx queues */
@@ -839,11 +838,8 @@ int mwifiex_process_event(struct mwifiex_adapter *adapter);
 int mwifiex_complete_cmd(struct mwifiex_adapter *adapter,
 			 struct cmd_ctrl_node *cmd_node);
 
-int mwifiex_send_cmd_async(struct mwifiex_private *priv, uint16_t cmd_no,
-			   u16 cmd_action, u32 cmd_oid, void *data_buf);
-
-int mwifiex_send_cmd_sync(struct mwifiex_private *priv, uint16_t cmd_no,
-			  u16 cmd_action, u32 cmd_oid, void *data_buf);
+int mwifiex_send_cmd(struct mwifiex_private *priv, u16 cmd_no,
+		     u16 cmd_action, u32 cmd_oid, void *data_buf, bool sync);
 
 void mwifiex_cmd_timeout_func(unsigned long function_context);
 
diff --git a/drivers/net/wireless/mwifiex/scan.c b/drivers/net/wireless/mwifiex/scan.c
index 92adbb1ebabc..0e8ca7bab3e7 100644
--- a/drivers/net/wireless/mwifiex/scan.c
+++ b/drivers/net/wireless/mwifiex/scan.c
@@ -738,8 +738,8 @@ mwifiex_scan_channel_list(struct mwifiex_private *priv,
 		else
 			cmd_no = HostCmd_CMD_802_11_SCAN;
 
-		ret = mwifiex_send_cmd_async(priv, cmd_no, HostCmd_ACT_GEN_SET,
-					     0, scan_cfg_out);
+		ret = mwifiex_send_cmd(priv, cmd_no, HostCmd_ACT_GEN_SET,
+				       0, scan_cfg_out, false);
 
 		/* rate IE is updated per scan command but same starting
 		 * pointer is used each time so that rate IE from earlier
diff --git a/drivers/net/wireless/mwifiex/sta_cmd.c b/drivers/net/wireless/mwifiex/sta_cmd.c
index 5aa3d39e48bc..4315a3ba3b92 100644
--- a/drivers/net/wireless/mwifiex/sta_cmd.c
+++ b/drivers/net/wireless/mwifiex/sta_cmd.c
@@ -1411,9 +1411,9 @@ int mwifiex_dnld_dt_cfgdata(struct mwifiex_private *priv,
 		/* property header is 6 bytes, data must fit in cmd buffer */
 		if (prop && prop->value && prop->length > 6 &&
 		    prop->length <= MWIFIEX_SIZE_OF_CMD_BUFFER - S_DS_GEN) {
-			ret = mwifiex_send_cmd_sync(priv, HostCmd_CMD_CFG_DATA,
-						    HostCmd_ACT_GEN_SET, 0,
-						    prop);
+			ret = mwifiex_send_cmd(priv, HostCmd_CMD_CFG_DATA,
+					       HostCmd_ACT_GEN_SET, 0,
+					       prop, true);
 			if (ret)
 				return ret;
 		}
@@ -1912,15 +1912,16 @@ int mwifiex_sta_init_cmd(struct mwifiex_private *priv, u8 first_sta)
 
 	if (first_sta) {
 		if (priv->adapter->iface_type == MWIFIEX_PCIE) {
-			ret = mwifiex_send_cmd_sync(priv,
-						HostCmd_CMD_PCIE_DESC_DETAILS,
-						HostCmd_ACT_GEN_SET, 0, NULL);
+			ret = mwifiex_send_cmd(priv,
+					       HostCmd_CMD_PCIE_DESC_DETAILS,
+					       HostCmd_ACT_GEN_SET, 0, NULL,
+					       true);
 			if (ret)
 				return -1;
 		}
 
-		ret = mwifiex_send_cmd_sync(priv, HostCmd_CMD_FUNC_INIT,
-					    HostCmd_ACT_GEN_SET, 0, NULL);
+		ret = mwifiex_send_cmd(priv, HostCmd_CMD_FUNC_INIT,
+				       HostCmd_ACT_GEN_SET, 0, NULL, true);
 		if (ret)
 			return -1;
 
@@ -1938,55 +1939,57 @@ int mwifiex_sta_init_cmd(struct mwifiex_private *priv, u8 first_sta)
 		}
 
 		if (adapter->cal_data) {
-			ret = mwifiex_send_cmd_sync(priv, HostCmd_CMD_CFG_DATA,
-						HostCmd_ACT_GEN_SET, 0, NULL);
+			ret = mwifiex_send_cmd(priv, HostCmd_CMD_CFG_DATA,
+					       HostCmd_ACT_GEN_SET, 0, NULL,
+					       true);
 			if (ret)
 				return -1;
 		}
 
 		/* Read MAC address from HW */
-		ret = mwifiex_send_cmd_sync(priv, HostCmd_CMD_GET_HW_SPEC,
-					    HostCmd_ACT_GEN_GET, 0, NULL);
+		ret = mwifiex_send_cmd(priv, HostCmd_CMD_GET_HW_SPEC,
+				       HostCmd_ACT_GEN_GET, 0, NULL, true);
 		if (ret)
 			return -1;
 
 		/* Reconfigure tx buf size */
-		ret = mwifiex_send_cmd_sync(priv,
-					    HostCmd_CMD_RECONFIGURE_TX_BUFF,
-					    HostCmd_ACT_GEN_SET, 0,
-					    &priv->adapter->tx_buf_size);
+		ret = mwifiex_send_cmd(priv, HostCmd_CMD_RECONFIGURE_TX_BUFF,
+				       HostCmd_ACT_GEN_SET, 0,
+				       &priv->adapter->tx_buf_size, true);
 		if (ret)
 			return -1;
 
 		if (priv->bss_type != MWIFIEX_BSS_TYPE_UAP) {
 			/* Enable IEEE PS by default */
 			priv->adapter->ps_mode = MWIFIEX_802_11_POWER_MODE_PSP;
-			ret = mwifiex_send_cmd_sync(
-					priv, HostCmd_CMD_802_11_PS_MODE_ENH,
-					EN_AUTO_PS, BITMAP_STA_PS, NULL);
+			ret = mwifiex_send_cmd(priv,
+					       HostCmd_CMD_802_11_PS_MODE_ENH,
+					       EN_AUTO_PS, BITMAP_STA_PS, NULL,
+					       true);
 			if (ret)
 				return -1;
 		}
 	}
 
 	/* get tx rate */
-	ret = mwifiex_send_cmd_sync(priv, HostCmd_CMD_TX_RATE_CFG,
-				    HostCmd_ACT_GEN_GET, 0, NULL);
+	ret = mwifiex_send_cmd(priv, HostCmd_CMD_TX_RATE_CFG,
+			       HostCmd_ACT_GEN_GET, 0, NULL, true);
 	if (ret)
 		return -1;
 	priv->data_rate = 0;
 
 	/* get tx power */
-	ret = mwifiex_send_cmd_sync(priv, HostCmd_CMD_RF_TX_PWR,
-				    HostCmd_ACT_GEN_GET, 0, NULL);
+	ret = mwifiex_send_cmd(priv, HostCmd_CMD_RF_TX_PWR,
+			       HostCmd_ACT_GEN_GET, 0, NULL, true);
 	if (ret)
 		return -1;
 
 	if (priv->bss_type == MWIFIEX_BSS_TYPE_STA) {
 		/* set ibss coalescing_status */
-		ret = mwifiex_send_cmd_sync(
-				priv, HostCmd_CMD_802_11_IBSS_COALESCING_STATUS,
-				HostCmd_ACT_GEN_SET, 0, &enable);
+		ret = mwifiex_send_cmd(
+				priv,
+				HostCmd_CMD_802_11_IBSS_COALESCING_STATUS,
+				HostCmd_ACT_GEN_SET, 0, &enable, true);
 		if (ret)
 			return -1;
 	}
@@ -1994,16 +1997,16 @@ int mwifiex_sta_init_cmd(struct mwifiex_private *priv, u8 first_sta)
 	memset(&amsdu_aggr_ctrl, 0, sizeof(amsdu_aggr_ctrl));
 	amsdu_aggr_ctrl.enable = true;
 	/* Send request to firmware */
-	ret = mwifiex_send_cmd_sync(priv, HostCmd_CMD_AMSDU_AGGR_CTRL,
-				    HostCmd_ACT_GEN_SET, 0,
-				    &amsdu_aggr_ctrl);
+	ret = mwifiex_send_cmd(priv, HostCmd_CMD_AMSDU_AGGR_CTRL,
+			       HostCmd_ACT_GEN_SET, 0,
+			       &amsdu_aggr_ctrl, true);
 	if (ret)
 		return -1;
 	/* MAC Control must be the last command in init_fw */
 	/* set MAC Control */
-	ret = mwifiex_send_cmd_sync(priv, HostCmd_CMD_MAC_CONTROL,
-				    HostCmd_ACT_GEN_SET, 0,
-				    &priv->curr_pkt_filter);
+	ret = mwifiex_send_cmd(priv, HostCmd_CMD_MAC_CONTROL,
+			       HostCmd_ACT_GEN_SET, 0,
+			       &priv->curr_pkt_filter, true);
 	if (ret)
 		return -1;
 
@@ -2012,10 +2015,9 @@ int mwifiex_sta_init_cmd(struct mwifiex_private *priv, u8 first_sta)
 		/* Enable auto deep sleep */
 		auto_ds.auto_ds = DEEP_SLEEP_ON;
 		auto_ds.idle_time = DEEP_SLEEP_IDLE_TIME;
-		ret = mwifiex_send_cmd_sync(priv,
-					    HostCmd_CMD_802_11_PS_MODE_ENH,
-					    EN_AUTO_PS, BITMAP_AUTO_DS,
-					    &auto_ds);
+		ret = mwifiex_send_cmd(priv, HostCmd_CMD_802_11_PS_MODE_ENH,
+				       EN_AUTO_PS, BITMAP_AUTO_DS,
+				       &auto_ds, true);
 		if (ret)
 			return -1;
 	}
@@ -2023,9 +2025,9 @@ int mwifiex_sta_init_cmd(struct mwifiex_private *priv, u8 first_sta)
 	if (priv->bss_type != MWIFIEX_BSS_TYPE_UAP) {
 		/* Send cmd to FW to enable/disable 11D function */
 		state_11d = ENABLE_11D;
-		ret = mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_SNMP_MIB,
-					    HostCmd_ACT_GEN_SET, DOT11D_I,
-					    &state_11d);
+		ret = mwifiex_send_cmd(priv, HostCmd_CMD_802_11_SNMP_MIB,
+				       HostCmd_ACT_GEN_SET, DOT11D_I,
+				       &state_11d, true);
 		if (ret)
 			dev_err(priv->adapter->dev,
 				"11D: failed to enable 11D\n");
@@ -2038,8 +2040,8 @@ int mwifiex_sta_init_cmd(struct mwifiex_private *priv, u8 first_sta)
 	 * (Short GI, Channel BW, Green field support etc.) for transmit
 	 */
 	tx_cfg.tx_htcap = MWIFIEX_FW_DEF_HTTXCFG;
-	ret = mwifiex_send_cmd_sync(priv, HostCmd_CMD_11N_CFG,
-				    HostCmd_ACT_GEN_SET, 0, &tx_cfg);
+	ret = mwifiex_send_cmd(priv, HostCmd_CMD_11N_CFG,
+			       HostCmd_ACT_GEN_SET, 0, &tx_cfg, true);
 
 	ret = -EINPROGRESS;
 
diff --git a/drivers/net/wireless/mwifiex/sta_cmdresp.c b/drivers/net/wireless/mwifiex/sta_cmdresp.c
index 1c5e18804074..a8f7d545e22a 100644
--- a/drivers/net/wireless/mwifiex/sta_cmdresp.c
+++ b/drivers/net/wireless/mwifiex/sta_cmdresp.c
@@ -158,8 +158,8 @@ static int mwifiex_ret_802_11_rssi_info(struct mwifiex_private *priv,
 
 	priv->subsc_evt_rssi_state = EVENT_HANDLED;
 
-	mwifiex_send_cmd_async(priv, HostCmd_CMD_802_11_SUBSCRIBE_EVENT,
-			       0, 0, subsc_evt);
+	mwifiex_send_cmd(priv, HostCmd_CMD_802_11_SUBSCRIBE_EVENT,
+			 0, 0, subsc_evt, false);
 
 	return 0;
 }
@@ -317,9 +317,8 @@ static int mwifiex_ret_tx_rate_cfg(struct mwifiex_private *priv,
 	if (priv->is_data_rate_auto)
 		priv->data_rate = 0;
 	else
-		return mwifiex_send_cmd_async(priv,
-					      HostCmd_CMD_802_11_TX_RATE_QUERY,
-					      HostCmd_ACT_GEN_GET, 0, NULL);
+		return mwifiex_send_cmd(priv, HostCmd_CMD_802_11_TX_RATE_QUERY,
+					HostCmd_ACT_GEN_GET, 0, NULL, false);
 
 	return 0;
 }
diff --git a/drivers/net/wireless/mwifiex/sta_event.c b/drivers/net/wireless/mwifiex/sta_event.c
index 92ff7b324b00..fd2a7165cfa5 100644
--- a/drivers/net/wireless/mwifiex/sta_event.c
+++ b/drivers/net/wireless/mwifiex/sta_event.c
@@ -293,9 +293,8 @@ int mwifiex_process_sta_event(struct mwifiex_private *priv)
 
 	case EVENT_HS_ACT_REQ:
 		dev_dbg(adapter->dev, "event: HS_ACT_REQ\n");
-		ret = mwifiex_send_cmd_async(priv,
-					     HostCmd_CMD_802_11_HS_CFG_ENH,
-					     0, 0, NULL);
+		ret = mwifiex_send_cmd(priv, HostCmd_CMD_802_11_HS_CFG_ENH,
+				       0, 0, NULL, false);
 		break;
 
 	case EVENT_MIC_ERR_UNICAST:
@@ -326,9 +325,8 @@ int mwifiex_process_sta_event(struct mwifiex_private *priv)
 
 	case EVENT_BG_SCAN_REPORT:
 		dev_dbg(adapter->dev, "event: BGS_REPORT\n");
-		ret = mwifiex_send_cmd_async(priv,
-					     HostCmd_CMD_802_11_BG_SCAN_QUERY,
-					     HostCmd_ACT_GEN_GET, 0, NULL);
+		ret = mwifiex_send_cmd(priv, HostCmd_CMD_802_11_BG_SCAN_QUERY,
+				       HostCmd_ACT_GEN_GET, 0, NULL, false);
 		break;
 
 	case EVENT_PORT_RELEASE:
@@ -345,16 +343,16 @@ int mwifiex_process_sta_event(struct mwifiex_private *priv)
 
 	case EVENT_WMM_STATUS_CHANGE:
 		dev_dbg(adapter->dev, "event: WMM status changed\n");
-		ret = mwifiex_send_cmd_async(priv, HostCmd_CMD_WMM_GET_STATUS,
-					     0, 0, NULL);
+		ret = mwifiex_send_cmd(priv, HostCmd_CMD_WMM_GET_STATUS,
+				       0, 0, NULL, false);
 		break;
 
 	case EVENT_RSSI_LOW:
 		cfg80211_cqm_rssi_notify(priv->netdev,
 					 NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW,
 					 GFP_KERNEL);
-		mwifiex_send_cmd_async(priv, HostCmd_CMD_RSSI_INFO,
-				       HostCmd_ACT_GEN_GET, 0, NULL);
+		mwifiex_send_cmd(priv, HostCmd_CMD_RSSI_INFO,
+				 HostCmd_ACT_GEN_GET, 0, NULL, false);
 		priv->subsc_evt_rssi_state = RSSI_LOW_RECVD;
 		dev_dbg(adapter->dev, "event: Beacon RSSI_LOW\n");
 		break;
@@ -368,8 +366,8 @@ int mwifiex_process_sta_event(struct mwifiex_private *priv)
 		cfg80211_cqm_rssi_notify(priv->netdev,
 					 NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH,
 					 GFP_KERNEL);
-		mwifiex_send_cmd_async(priv, HostCmd_CMD_RSSI_INFO,
-				       HostCmd_ACT_GEN_GET, 0, NULL);
+		mwifiex_send_cmd(priv, HostCmd_CMD_RSSI_INFO,
+				 HostCmd_ACT_GEN_GET, 0, NULL, false);
 		priv->subsc_evt_rssi_state = RSSI_HIGH_RECVD;
 		dev_dbg(adapter->dev, "event: Beacon RSSI_HIGH\n");
 		break;
@@ -396,15 +394,15 @@ int mwifiex_process_sta_event(struct mwifiex_private *priv)
 		break;
 	case EVENT_IBSS_COALESCED:
 		dev_dbg(adapter->dev, "event: IBSS_COALESCED\n");
-		ret = mwifiex_send_cmd_async(priv,
+		ret = mwifiex_send_cmd(priv,
 				HostCmd_CMD_802_11_IBSS_COALESCING_STATUS,
-				HostCmd_ACT_GEN_GET, 0, NULL);
+				HostCmd_ACT_GEN_GET, 0, NULL, false);
 		break;
 	case EVENT_ADDBA:
 		dev_dbg(adapter->dev, "event: ADDBA Request\n");
-		mwifiex_send_cmd_async(priv, HostCmd_CMD_11N_ADDBA_RSP,
-				       HostCmd_ACT_GEN_SET, 0,
-				       adapter->event_body);
+		mwifiex_send_cmd(priv, HostCmd_CMD_11N_ADDBA_RSP,
+				 HostCmd_ACT_GEN_SET, 0,
+				 adapter->event_body, false);
 		break;
 	case EVENT_DELBA:
 		dev_dbg(adapter->dev, "event: DELBA Request\n");
@@ -455,10 +453,10 @@ int mwifiex_process_sta_event(struct mwifiex_private *priv)
 		priv->csa_expire_time =
 				jiffies + msecs_to_jiffies(DFS_CHAN_MOVE_TIME);
 		priv->csa_chan = priv->curr_bss_params.bss_descriptor.channel;
-		ret = mwifiex_send_cmd_async(priv,
-			HostCmd_CMD_802_11_DEAUTHENTICATE,
+		ret = mwifiex_send_cmd(priv, HostCmd_CMD_802_11_DEAUTHENTICATE,
 			HostCmd_ACT_GEN_SET, 0,
-			priv->curr_bss_params.bss_descriptor.mac_address);
+			priv->curr_bss_params.bss_descriptor.mac_address,
+			false);
 		break;
 
 	default:
diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c
index b393d55b3aa0..33170af150f6 100644
--- a/drivers/net/wireless/mwifiex/sta_ioctl.c
+++ b/drivers/net/wireless/mwifiex/sta_ioctl.c
@@ -108,19 +108,19 @@ int mwifiex_request_set_multicast_list(struct mwifiex_private *priv,
 				"info: Set multicast list=%d\n",
 				mcast_list->num_multicast_addr);
 			/* Send multicast addresses to firmware */
-			ret = mwifiex_send_cmd_async(priv,
-				HostCmd_CMD_MAC_MULTICAST_ADR,
-				HostCmd_ACT_GEN_SET, 0,
-				mcast_list);
+			ret = mwifiex_send_cmd(priv,
+					       HostCmd_CMD_MAC_MULTICAST_ADR,
+					       HostCmd_ACT_GEN_SET, 0,
+					       mcast_list, false);
 		}
 	}
 	dev_dbg(priv->adapter->dev,
 		"info: old_pkt_filter=%#x, curr_pkt_filter=%#x\n",
 	       old_pkt_filter, priv->curr_pkt_filter);
 	if (old_pkt_filter != priv->curr_pkt_filter) {
-		ret = mwifiex_send_cmd_async(priv, HostCmd_CMD_MAC_CONTROL,
-					     HostCmd_ACT_GEN_SET,
-					     0, &priv->curr_pkt_filter);
+		ret = mwifiex_send_cmd(priv, HostCmd_CMD_MAC_CONTROL,
+				       HostCmd_ACT_GEN_SET,
+				       0, &priv->curr_pkt_filter, false);
 	}
 
 	return ret;
@@ -237,8 +237,8 @@ static int mwifiex_process_country_ie(struct mwifiex_private *priv,
 
 	rcu_read_unlock();
 
-	if (mwifiex_send_cmd_async(priv, HostCmd_CMD_802_11D_DOMAIN_INFO,
-				   HostCmd_ACT_GEN_SET, 0, NULL)) {
+	if (mwifiex_send_cmd(priv, HostCmd_CMD_802_11D_DOMAIN_INFO,
+			     HostCmd_ACT_GEN_SET, 0, NULL, false)) {
 		wiphy_err(priv->adapter->wiphy,
 			  "11D: setting domain info in FW\n");
 		return -1;
@@ -429,16 +429,13 @@ static int mwifiex_set_hs_params(struct mwifiex_private *priv, u16 action,
 				status = -1;
 				break;
 			}
-			if (cmd_type == MWIFIEX_SYNC_CMD)
-				status = mwifiex_send_cmd_sync(priv,
-						HostCmd_CMD_802_11_HS_CFG_ENH,
-						HostCmd_ACT_GEN_SET, 0,
-						&adapter->hs_cfg);
-			else
-				status = mwifiex_send_cmd_async(priv,
-						HostCmd_CMD_802_11_HS_CFG_ENH,
-						HostCmd_ACT_GEN_SET, 0,
-						&adapter->hs_cfg);
+
+			status = mwifiex_send_cmd(priv,
+						  HostCmd_CMD_802_11_HS_CFG_ENH,
+						  HostCmd_ACT_GEN_SET, 0,
+						  &adapter->hs_cfg,
+						  cmd_type == MWIFIEX_SYNC_CMD);
+
 			if (hs_cfg->conditions == HS_CFG_CANCEL)
 				/* Restore previous condition */
 				adapter->hs_cfg.conditions =
@@ -586,8 +583,8 @@ int mwifiex_disable_auto_ds(struct mwifiex_private *priv)
 
 	auto_ds.auto_ds = DEEP_SLEEP_OFF;
 
-	return mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_PS_MODE_ENH,
-				     DIS_AUTO_PS, BITMAP_AUTO_DS, &auto_ds);
+	return mwifiex_send_cmd(priv, HostCmd_CMD_802_11_PS_MODE_ENH,
+				DIS_AUTO_PS, BITMAP_AUTO_DS, &auto_ds, true);
 }
 EXPORT_SYMBOL_GPL(mwifiex_disable_auto_ds);
 
@@ -601,8 +598,8 @@ int mwifiex_drv_get_data_rate(struct mwifiex_private *priv, u32 *rate)
 {
 	int ret;
 
-	ret = mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_TX_RATE_QUERY,
-				    HostCmd_ACT_GEN_GET, 0, NULL);
+	ret = mwifiex_send_cmd(priv, HostCmd_CMD_802_11_TX_RATE_QUERY,
+			       HostCmd_ACT_GEN_GET, 0, NULL, true);
 
 	if (!ret) {
 		if (priv->is_data_rate_auto)
@@ -698,8 +695,8 @@ int mwifiex_set_tx_power(struct mwifiex_private *priv,
 		pg->power_max = (s8) dbm;
 		pg->ht_bandwidth = HT_BW_40;
 	}
-	ret = mwifiex_send_cmd_sync(priv, HostCmd_CMD_TXPWR_CFG,
-				    HostCmd_ACT_GEN_SET, 0, buf);
+	ret = mwifiex_send_cmd(priv, HostCmd_CMD_TXPWR_CFG,
+			       HostCmd_ACT_GEN_SET, 0, buf, true);
 
 	kfree(buf);
 	return ret;
@@ -722,12 +719,11 @@ int mwifiex_drv_set_power(struct mwifiex_private *priv, u32 *ps_mode)
 	else
 		adapter->ps_mode = MWIFIEX_802_11_POWER_MODE_CAM;
 	sub_cmd = (*ps_mode) ? EN_AUTO_PS : DIS_AUTO_PS;
-	ret = mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_PS_MODE_ENH,
-				    sub_cmd, BITMAP_STA_PS, NULL);
+	ret = mwifiex_send_cmd(priv, HostCmd_CMD_802_11_PS_MODE_ENH,
+			       sub_cmd, BITMAP_STA_PS, NULL, true);
 	if ((!ret) && (sub_cmd == DIS_AUTO_PS))
-		ret = mwifiex_send_cmd_async(priv,
-					     HostCmd_CMD_802_11_PS_MODE_ENH,
-					     GET_PS, 0, NULL);
+		ret = mwifiex_send_cmd(priv, HostCmd_CMD_802_11_PS_MODE_ENH,
+				       GET_PS, 0, NULL, false);
 
 	return ret;
 }
@@ -851,9 +847,9 @@ static int mwifiex_sec_ioctl_set_wapi_key(struct mwifiex_private *priv,
 			       struct mwifiex_ds_encrypt_key *encrypt_key)
 {
 
-	return mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_KEY_MATERIAL,
-				     HostCmd_ACT_GEN_SET, KEY_INFO_ENABLED,
-				     encrypt_key);
+	return mwifiex_send_cmd(priv, HostCmd_CMD_802_11_KEY_MATERIAL,
+				HostCmd_ACT_GEN_SET, KEY_INFO_ENABLED,
+				encrypt_key, true);
 }
 
 /*
@@ -917,9 +913,8 @@ static int mwifiex_sec_ioctl_set_wep_key(struct mwifiex_private *priv,
 			enc_key = NULL;
 
 		/* Send request to firmware */
-		ret = mwifiex_send_cmd_async(priv,
-					     HostCmd_CMD_802_11_KEY_MATERIAL,
-					     HostCmd_ACT_GEN_SET, 0, enc_key);
+		ret = mwifiex_send_cmd(priv, HostCmd_CMD_802_11_KEY_MATERIAL,
+				       HostCmd_ACT_GEN_SET, 0, enc_key, false);
 		if (ret)
 			return ret;
 	}
@@ -929,9 +924,9 @@ static int mwifiex_sec_ioctl_set_wep_key(struct mwifiex_private *priv,
 	else
 		priv->curr_pkt_filter &= ~HostCmd_ACT_MAC_WEP_ENABLE;
 
-	ret = mwifiex_send_cmd_sync(priv, HostCmd_CMD_MAC_CONTROL,
-				    HostCmd_ACT_GEN_SET, 0,
-				    &priv->curr_pkt_filter);
+	ret = mwifiex_send_cmd(priv, HostCmd_CMD_MAC_CONTROL,
+			       HostCmd_ACT_GEN_SET, 0,
+			       &priv->curr_pkt_filter, true);
 
 	return ret;
 }
@@ -966,10 +961,9 @@ static int mwifiex_sec_ioctl_set_wpa_key(struct mwifiex_private *priv,
 		 */
 		/* Send the key as PTK to firmware */
 		encrypt_key->key_index = MWIFIEX_KEY_INDEX_UNICAST;
-		ret = mwifiex_send_cmd_async(priv,
-					     HostCmd_CMD_802_11_KEY_MATERIAL,
-					     HostCmd_ACT_GEN_SET,
-					     KEY_INFO_ENABLED, encrypt_key);
+		ret = mwifiex_send_cmd(priv, HostCmd_CMD_802_11_KEY_MATERIAL,
+				       HostCmd_ACT_GEN_SET,
+				       KEY_INFO_ENABLED, encrypt_key, false);
 		if (ret)
 			return ret;
 
@@ -993,15 +987,13 @@ static int mwifiex_sec_ioctl_set_wpa_key(struct mwifiex_private *priv,
 		encrypt_key->key_index = MWIFIEX_KEY_INDEX_UNICAST;
 
 	if (remove_key)
-		ret = mwifiex_send_cmd_sync(priv,
-					    HostCmd_CMD_802_11_KEY_MATERIAL,
-					    HostCmd_ACT_GEN_SET,
-					    !KEY_INFO_ENABLED, encrypt_key);
+		ret = mwifiex_send_cmd(priv, HostCmd_CMD_802_11_KEY_MATERIAL,
+				       HostCmd_ACT_GEN_SET,
+				       !KEY_INFO_ENABLED, encrypt_key, true);
 	else
-		ret = mwifiex_send_cmd_sync(priv,
-					    HostCmd_CMD_802_11_KEY_MATERIAL,
-					    HostCmd_ACT_GEN_SET,
-					    KEY_INFO_ENABLED, encrypt_key);
+		ret = mwifiex_send_cmd(priv, HostCmd_CMD_802_11_KEY_MATERIAL,
+				       HostCmd_ACT_GEN_SET,
+				       KEY_INFO_ENABLED, encrypt_key, true);
 
 	return ret;
 }
@@ -1105,8 +1097,8 @@ mwifiex_get_ver_ext(struct mwifiex_private *priv)
 	struct mwifiex_ver_ext ver_ext;
 
 	memset(&ver_ext, 0, sizeof(struct host_cmd_ds_version_ext));
-	if (mwifiex_send_cmd_sync(priv, HostCmd_CMD_VERSION_EXT,
-				  HostCmd_ACT_GEN_GET, 0, &ver_ext))
+	if (mwifiex_send_cmd(priv, HostCmd_CMD_VERSION_EXT,
+			     HostCmd_ACT_GEN_GET, 0, &ver_ext, true))
 		return -1;
 
 	return 0;
@@ -1131,8 +1123,8 @@ mwifiex_remain_on_chan_cfg(struct mwifiex_private *priv, u16 action,
 			ieee80211_frequency_to_channel(chan->center_freq);
 		roc_cfg.duration = cpu_to_le32(duration);
 	}
-	if (mwifiex_send_cmd_sync(priv, HostCmd_CMD_REMAIN_ON_CHAN,
-				  action, 0, &roc_cfg)) {
+	if (mwifiex_send_cmd(priv, HostCmd_CMD_REMAIN_ON_CHAN,
+			     action, 0, &roc_cfg, true)) {
 		dev_err(priv->adapter->dev, "failed to remain on channel\n");
 		return -1;
 	}
@@ -1164,8 +1156,8 @@ mwifiex_set_bss_role(struct mwifiex_private *priv, u8 bss_role)
 		break;
 	}
 
-	mwifiex_send_cmd_sync(priv, HostCmd_CMD_SET_BSS_MODE,
-			      HostCmd_ACT_GEN_SET, 0, NULL);
+	mwifiex_send_cmd(priv, HostCmd_CMD_SET_BSS_MODE,
+			 HostCmd_ACT_GEN_SET, 0, NULL, true);
 
 	return mwifiex_sta_init_cmd(priv, false);
 }
@@ -1180,8 +1172,8 @@ int
 mwifiex_get_stats_info(struct mwifiex_private *priv,
 		       struct mwifiex_ds_get_stats *log)
 {
-	return mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_GET_LOG,
-				     HostCmd_ACT_GEN_GET, 0, log);
+	return mwifiex_send_cmd(priv, HostCmd_CMD_802_11_GET_LOG,
+				HostCmd_ACT_GEN_GET, 0, log, true);
 }
 
 /*
@@ -1223,8 +1215,7 @@ static int mwifiex_reg_mem_ioctl_reg_rw(struct mwifiex_private *priv,
 		return -1;
 	}
 
-	return mwifiex_send_cmd_sync(priv, cmd_no, action, 0, reg_rw);
-
+	return mwifiex_send_cmd(priv, cmd_no, action, 0, reg_rw, true);
 }
 
 /*
@@ -1289,8 +1280,8 @@ mwifiex_eeprom_read(struct mwifiex_private *priv, u16 offset, u16 bytes,
 	rd_eeprom.byte_count = cpu_to_le16((u16) bytes);
 
 	/* Send request to firmware */
-	ret = mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_EEPROM_ACCESS,
-				    HostCmd_ACT_GEN_GET, 0, &rd_eeprom);
+	ret = mwifiex_send_cmd(priv, HostCmd_CMD_802_11_EEPROM_ACCESS,
+			       HostCmd_ACT_GEN_GET, 0, &rd_eeprom, true);
 
 	if (!ret)
 		memcpy(value, rd_eeprom.value, MAX_EEPROM_DATA);
diff --git a/drivers/net/wireless/mwifiex/tdls.c b/drivers/net/wireless/mwifiex/tdls.c
index 1ba2a16ee471..8cec6e4ba8c4 100644
--- a/drivers/net/wireless/mwifiex/tdls.c
+++ b/drivers/net/wireless/mwifiex/tdls.c
@@ -864,8 +864,8 @@ mwifiex_tdls_process_config_link(struct mwifiex_private *priv, u8 *peer)
 
 	memcpy(&tdls_oper.peer_mac, peer, ETH_ALEN);
 	tdls_oper.tdls_action = MWIFIEX_TDLS_CONFIG_LINK;
-	return mwifiex_send_cmd_sync(priv, HostCmd_CMD_TDLS_OPER,
-				     HostCmd_ACT_GEN_SET, 0, &tdls_oper);
+	return mwifiex_send_cmd(priv, HostCmd_CMD_TDLS_OPER,
+				HostCmd_ACT_GEN_SET, 0, &tdls_oper, true);
 }
 
 static int
@@ -891,8 +891,8 @@ mwifiex_tdls_process_create_link(struct mwifiex_private *priv, u8 *peer)
 	mwifiex_hold_tdls_packets(priv, peer);
 	memcpy(&tdls_oper.peer_mac, peer, ETH_ALEN);
 	tdls_oper.tdls_action = MWIFIEX_TDLS_CREATE_LINK;
-	return mwifiex_send_cmd_sync(priv, HostCmd_CMD_TDLS_OPER,
-				     HostCmd_ACT_GEN_SET, 0, &tdls_oper);
+	return mwifiex_send_cmd(priv, HostCmd_CMD_TDLS_OPER,
+				HostCmd_ACT_GEN_SET, 0, &tdls_oper, true);
 }
 
 static int
@@ -920,8 +920,8 @@ mwifiex_tdls_process_disable_link(struct mwifiex_private *priv, u8 *peer)
 	mwifiex_restore_tdls_packets(priv, peer, TDLS_LINK_TEARDOWN);
 	memcpy(&tdls_oper.peer_mac, peer, ETH_ALEN);
 	tdls_oper.tdls_action = MWIFIEX_TDLS_DISABLE_LINK;
-	return mwifiex_send_cmd_sync(priv, HostCmd_CMD_TDLS_OPER,
-				     HostCmd_ACT_GEN_SET, 0, &tdls_oper);
+	return mwifiex_send_cmd(priv, HostCmd_CMD_TDLS_OPER,
+				HostCmd_ACT_GEN_SET, 0, &tdls_oper, true);
 }
 
 static int
@@ -1033,8 +1033,8 @@ void mwifiex_disable_all_tdls_links(struct mwifiex_private *priv)
 					     TDLS_LINK_TEARDOWN);
 		memcpy(&tdls_oper.peer_mac, sta_ptr->mac_addr, ETH_ALEN);
 		tdls_oper.tdls_action = MWIFIEX_TDLS_DISABLE_LINK;
-		if (mwifiex_send_cmd_async(priv, HostCmd_CMD_TDLS_OPER,
-					   HostCmd_ACT_GEN_SET, 0, &tdls_oper))
+		if (mwifiex_send_cmd(priv, HostCmd_CMD_TDLS_OPER,
+				     HostCmd_ACT_GEN_SET, 0, &tdls_oper, false))
 			dev_warn(priv->adapter->dev,
 				 "Disable link failed for TDLS peer %pM",
 				 sta_ptr->mac_addr);
diff --git a/drivers/net/wireless/mwifiex/uap_cmd.c b/drivers/net/wireless/mwifiex/uap_cmd.c
index 64424c81b44f..a6a6a53cda40 100644
--- a/drivers/net/wireless/mwifiex/uap_cmd.c
+++ b/drivers/net/wireless/mwifiex/uap_cmd.c
@@ -226,8 +226,8 @@ void mwifiex_set_vht_width(struct mwifiex_private *priv,
 	if (ap_11ac_enable && width >= NL80211_CHAN_WIDTH_80)
 		vht_cfg.misc_config |= VHT_BW_80_160_80P80;
 
-	mwifiex_send_cmd_sync(priv, HostCmd_CMD_11AC_CFG,
-			      HostCmd_ACT_GEN_SET, 0, &vht_cfg);
+	mwifiex_send_cmd(priv, HostCmd_CMD_11AC_CFG,
+			 HostCmd_ACT_GEN_SET, 0, &vht_cfg, true);
 
 	return;
 }
diff --git a/drivers/net/wireless/mwifiex/uap_event.c b/drivers/net/wireless/mwifiex/uap_event.c
index 2d47ba70225c..ae50e916d8f2 100644
--- a/drivers/net/wireless/mwifiex/uap_event.c
+++ b/drivers/net/wireless/mwifiex/uap_event.c
@@ -150,9 +150,9 @@ int mwifiex_process_uap_event(struct mwifiex_private *priv)
 	case EVENT_ADDBA:
 		dev_dbg(adapter->dev, "event: ADDBA Request\n");
 		if (priv->media_connected)
-			mwifiex_send_cmd_async(priv, HostCmd_CMD_11N_ADDBA_RSP,
-					       HostCmd_ACT_GEN_SET, 0,
-					       adapter->event_body);
+			mwifiex_send_cmd(priv, HostCmd_CMD_11N_ADDBA_RSP,
+					 HostCmd_ACT_GEN_SET, 0,
+					 adapter->event_body, false);
 		break;
 	case EVENT_DELBA:
 		dev_dbg(adapter->dev, "event: DELBA Request\n");
diff --git a/drivers/net/wireless/mwifiex/util.c b/drivers/net/wireless/mwifiex/util.c
index 8d37bfc578bd..098de8810729 100644
--- a/drivers/net/wireless/mwifiex/util.c
+++ b/drivers/net/wireless/mwifiex/util.c
@@ -72,7 +72,7 @@ int mwifiex_init_shutdown_fw(struct mwifiex_private *priv,
 		return -1;
 	}
 
-	return mwifiex_send_cmd_sync(priv, cmd, HostCmd_ACT_GEN_SET, 0, NULL);
+	return mwifiex_send_cmd(priv, cmd, HostCmd_ACT_GEN_SET, 0, NULL, true);
 }
 EXPORT_SYMBOL_GPL(mwifiex_init_shutdown_fw);
 
-- 
cgit v1.2.2


From 828cf2222f05a22e51cdde4fb959d256bf31613b Mon Sep 17 00:00:00 2001
From: Amitkumar Karwar <akarwar@marvell.com>
Date: Thu, 27 Feb 2014 19:35:13 -0800
Subject: mwifiex: change transmit buffer size for 8897

Currently default Tx buffer size configured to firmware is 2K
for all chipsets. This patch changes it to 4K for SD/PCIe/USB
8897 chipsets as per firmware requirements.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/init.c | 1 -
 drivers/net/wireless/mwifiex/pcie.c | 2 ++
 drivers/net/wireless/mwifiex/pcie.h | 3 +++
 drivers/net/wireless/mwifiex/sdio.c | 2 ++
 drivers/net/wireless/mwifiex/sdio.h | 6 ++++++
 drivers/net/wireless/mwifiex/usb.c  | 2 ++
 6 files changed, 15 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/init.c b/drivers/net/wireless/mwifiex/init.c
index 759492817aeb..4ecd0b208ac6 100644
--- a/drivers/net/wireless/mwifiex/init.c
+++ b/drivers/net/wireless/mwifiex/init.c
@@ -234,7 +234,6 @@ static void mwifiex_init_adapter(struct mwifiex_adapter *adapter)
 
 	adapter->pm_wakeup_fw_try = false;
 
-	adapter->tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K;
 	adapter->curr_tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K;
 
 	adapter->is_hs_configured = false;
diff --git a/drivers/net/wireless/mwifiex/pcie.c b/drivers/net/wireless/mwifiex/pcie.c
index d11d4acf0890..92c31b5c269c 100644
--- a/drivers/net/wireless/mwifiex/pcie.c
+++ b/drivers/net/wireless/mwifiex/pcie.c
@@ -190,6 +190,7 @@ static int mwifiex_pcie_probe(struct pci_dev *pdev,
 		card->pcie.firmware = data->firmware;
 		card->pcie.reg = data->reg;
 		card->pcie.blksz_fw_dl = data->blksz_fw_dl;
+		card->pcie.tx_buf_size = data->tx_buf_size;
 	}
 
 	if (mwifiex_add_card(card, &add_remove_card_sem, &pcie_ops,
@@ -2320,6 +2321,7 @@ static int mwifiex_register_dev(struct mwifiex_adapter *adapter)
 	}
 
 	adapter->dev = &pdev->dev;
+	adapter->tx_buf_size = card->pcie.tx_buf_size;
 	strcpy(adapter->fw_name, card->pcie.firmware);
 
 	return 0;
diff --git a/drivers/net/wireless/mwifiex/pcie.h b/drivers/net/wireless/mwifiex/pcie.h
index d322ab8604ea..193af75bf582 100644
--- a/drivers/net/wireless/mwifiex/pcie.h
+++ b/drivers/net/wireless/mwifiex/pcie.h
@@ -195,18 +195,21 @@ struct mwifiex_pcie_device {
 	const char *firmware;
 	const struct mwifiex_pcie_card_reg *reg;
 	u16 blksz_fw_dl;
+	u16 tx_buf_size;
 };
 
 static const struct mwifiex_pcie_device mwifiex_pcie8766 = {
 	.firmware       = PCIE8766_DEFAULT_FW_NAME,
 	.reg            = &mwifiex_reg_8766,
 	.blksz_fw_dl = MWIFIEX_PCIE_BLOCK_SIZE_FW_DNLD,
+	.tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K,
 };
 
 static const struct mwifiex_pcie_device mwifiex_pcie8897 = {
 	.firmware       = PCIE8897_DEFAULT_FW_NAME,
 	.reg            = &mwifiex_reg_8897,
 	.blksz_fw_dl = MWIFIEX_PCIE_BLOCK_SIZE_FW_DNLD,
+	.tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_4K,
 };
 
 struct mwifiex_evt_buf_desc {
diff --git a/drivers/net/wireless/mwifiex/sdio.c b/drivers/net/wireless/mwifiex/sdio.c
index b44a31523461..d5661a6209be 100644
--- a/drivers/net/wireless/mwifiex/sdio.c
+++ b/drivers/net/wireless/mwifiex/sdio.c
@@ -84,6 +84,7 @@ mwifiex_sdio_probe(struct sdio_func *func, const struct sdio_device_id *id)
 		card->mp_agg_pkt_limit = data->mp_agg_pkt_limit;
 		card->supports_sdio_new_mode = data->supports_sdio_new_mode;
 		card->has_control_mask = data->has_control_mask;
+		card->tx_buf_size = data->tx_buf_size;
 	}
 
 	sdio_claim_host(func);
@@ -1760,6 +1761,7 @@ static int mwifiex_register_dev(struct mwifiex_adapter *adapter)
 
 	/* save adapter pointer in card */
 	card->adapter = adapter;
+	adapter->tx_buf_size = card->tx_buf_size;
 
 	sdio_claim_host(func);
 
diff --git a/drivers/net/wireless/mwifiex/sdio.h b/drivers/net/wireless/mwifiex/sdio.h
index 532ae0ac4dfb..c71201b2e2a3 100644
--- a/drivers/net/wireless/mwifiex/sdio.h
+++ b/drivers/net/wireless/mwifiex/sdio.h
@@ -233,6 +233,7 @@ struct sdio_mmc_card {
 	u8 mp_agg_pkt_limit;
 	bool supports_sdio_new_mode;
 	bool has_control_mask;
+	u16 tx_buf_size;
 
 	u32 mp_rd_bitmap;
 	u32 mp_wr_bitmap;
@@ -256,6 +257,7 @@ struct mwifiex_sdio_device {
 	u8 mp_agg_pkt_limit;
 	bool supports_sdio_new_mode;
 	bool has_control_mask;
+	u16 tx_buf_size;
 };
 
 static const struct mwifiex_sdio_card_reg mwifiex_reg_sd87xx = {
@@ -312,6 +314,7 @@ static const struct mwifiex_sdio_device mwifiex_sdio_sd8786 = {
 	.mp_agg_pkt_limit = 8,
 	.supports_sdio_new_mode = false,
 	.has_control_mask = true,
+	.tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K,
 };
 
 static const struct mwifiex_sdio_device mwifiex_sdio_sd8787 = {
@@ -321,6 +324,7 @@ static const struct mwifiex_sdio_device mwifiex_sdio_sd8787 = {
 	.mp_agg_pkt_limit = 8,
 	.supports_sdio_new_mode = false,
 	.has_control_mask = true,
+	.tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K,
 };
 
 static const struct mwifiex_sdio_device mwifiex_sdio_sd8797 = {
@@ -330,6 +334,7 @@ static const struct mwifiex_sdio_device mwifiex_sdio_sd8797 = {
 	.mp_agg_pkt_limit = 8,
 	.supports_sdio_new_mode = false,
 	.has_control_mask = true,
+	.tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K,
 };
 
 static const struct mwifiex_sdio_device mwifiex_sdio_sd8897 = {
@@ -339,6 +344,7 @@ static const struct mwifiex_sdio_device mwifiex_sdio_sd8897 = {
 	.mp_agg_pkt_limit = 16,
 	.supports_sdio_new_mode = true,
 	.has_control_mask = false,
+	.tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_4K,
 };
 
 /*
diff --git a/drivers/net/wireless/mwifiex/usb.c b/drivers/net/wireless/mwifiex/usb.c
index e8ebbd4bc3cd..21d1316adaa0 100644
--- a/drivers/net/wireless/mwifiex/usb.c
+++ b/drivers/net/wireless/mwifiex/usb.c
@@ -776,11 +776,13 @@ static int mwifiex_register_dev(struct mwifiex_adapter *adapter)
 	switch (le16_to_cpu(card->udev->descriptor.idProduct)) {
 	case USB8897_PID_1:
 	case USB8897_PID_2:
+		adapter->tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_4K;
 		strcpy(adapter->fw_name, USB8897_DEFAULT_FW_NAME);
 		break;
 	case USB8797_PID_1:
 	case USB8797_PID_2:
 	default:
+		adapter->tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K;
 		strcpy(adapter->fw_name, USB8797_DEFAULT_FW_NAME);
 		break;
 	}
-- 
cgit v1.2.2


From 4af2bd49e6777d39db9bafc868860f0cfdd04652 Mon Sep 17 00:00:00 2001
From: Amitkumar Karwar <akarwar@marvell.com>
Date: Thu, 27 Feb 2014 19:35:15 -0800
Subject: mwifiex: abort scan while cancelling pending command

mwifiex_cancel_pending_ioctl() and
mwifiex_cancel_all_pending_cmd() are called in command timeout
and driver unload paths respectively.
If scan operation is in progress, we should abort it smoothly.

Reported-by: Tim Shepard <shep@alum.mit.edu>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/cmdevt.c | 38 ++++++++++++++++++++++++++++-------
 1 file changed, 31 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c
index 64e708b79f0e..58cf3a98f1f7 100644
--- a/drivers/net/wireless/mwifiex/cmdevt.c
+++ b/drivers/net/wireless/mwifiex/cmdevt.c
@@ -966,7 +966,9 @@ void
 mwifiex_cancel_all_pending_cmd(struct mwifiex_adapter *adapter)
 {
 	struct cmd_ctrl_node *cmd_node = NULL, *tmp_node;
-	unsigned long flags;
+	unsigned long flags, cmd_flags;
+	struct mwifiex_private *priv;
+	int i;
 
 	/* Cancel current cmd */
 	if ((adapter->curr_cmd) && (adapter->curr_cmd->wait_q_enabled)) {
@@ -1006,9 +1008,21 @@ mwifiex_cancel_all_pending_cmd(struct mwifiex_adapter *adapter)
 	}
 	spin_unlock_irqrestore(&adapter->scan_pending_q_lock, flags);
 
-	spin_lock_irqsave(&adapter->mwifiex_cmd_lock, flags);
-	adapter->scan_processing = false;
-	spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, flags);
+	if (adapter->scan_processing) {
+		spin_lock_irqsave(&adapter->mwifiex_cmd_lock, cmd_flags);
+		adapter->scan_processing = false;
+		spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, cmd_flags);
+		for (i = 0; i < adapter->priv_num; i++) {
+			priv = adapter->priv[i];
+			if (!priv)
+				continue;
+			if (priv->scan_request) {
+				dev_dbg(adapter->dev, "info: aborting scan\n");
+				cfg80211_scan_done(priv->scan_request, 1);
+				priv->scan_request = NULL;
+			}
+		}
+	}
 }
 
 /*
@@ -1027,7 +1041,8 @@ mwifiex_cancel_pending_ioctl(struct mwifiex_adapter *adapter)
 	struct cmd_ctrl_node *cmd_node = NULL, *tmp_node = NULL;
 	unsigned long cmd_flags;
 	unsigned long scan_pending_q_flags;
-	bool cancel_scan_cmd = false;
+	struct mwifiex_private *priv;
+	int i;
 
 	if ((adapter->curr_cmd) &&
 	    (adapter->curr_cmd->wait_q_enabled)) {
@@ -1053,15 +1068,24 @@ mwifiex_cancel_pending_ioctl(struct mwifiex_adapter *adapter)
 		mwifiex_insert_cmd_to_free_q(adapter, cmd_node);
 		spin_lock_irqsave(&adapter->scan_pending_q_lock,
 				  scan_pending_q_flags);
-		cancel_scan_cmd = true;
 	}
 	spin_unlock_irqrestore(&adapter->scan_pending_q_lock,
 			       scan_pending_q_flags);
 
-	if (cancel_scan_cmd) {
+	if (adapter->scan_processing) {
 		spin_lock_irqsave(&adapter->mwifiex_cmd_lock, cmd_flags);
 		adapter->scan_processing = false;
 		spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, cmd_flags);
+		for (i = 0; i < adapter->priv_num; i++) {
+			priv = adapter->priv[i];
+			if (!priv)
+				continue;
+			if (priv->scan_request) {
+				dev_dbg(adapter->dev, "info: aborting scan\n");
+				cfg80211_scan_done(priv->scan_request, 1);
+				priv->scan_request = NULL;
+			}
+		}
 	}
 	adapter->cmd_wait_q.status = -1;
 }
-- 
cgit v1.2.2


From ace273551b7c9c2cfbfc606ac4cd518c67f80faf Mon Sep 17 00:00:00 2001
From: Amitkumar Karwar <akarwar@marvell.com>
Date: Thu, 27 Feb 2014 19:35:16 -0800
Subject: mwifiex: skipping pending commands after unload

We skip downloading other commands after FUNC_SHUTDOWN is queued
during driver unload. Main thread should be woken up each time
after freeing skipped command so that FUNC_SHUTDOWN gets served
in case if there are other pending commands before FUNC_SHUTDOWN.
Also, call mwifiex_complete_cmd() only for synchronous commands.

Reported-by: Avery Pennarun <apenwarr@gmail.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Maithili Hinge <maithili@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/cmdevt.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c
index 58cf3a98f1f7..0958764d2bae 100644
--- a/drivers/net/wireless/mwifiex/cmdevt.c
+++ b/drivers/net/wireless/mwifiex/cmdevt.c
@@ -165,8 +165,10 @@ static int mwifiex_dnld_cmd_to_fw(struct mwifiex_private *priv,
 		dev_err(adapter->dev,
 			"DNLD_CMD: FW in reset state, ignore cmd %#x\n",
 			cmd_code);
-		mwifiex_complete_cmd(adapter, cmd_node);
+		if (cmd_node->wait_q_enabled)
+			mwifiex_complete_cmd(adapter, cmd_node);
 		mwifiex_recycle_cmd_node(adapter, cmd_node);
+		queue_work(adapter->workqueue, &adapter->main_work);
 		return -1;
 	}
 
-- 
cgit v1.2.2


From 848819f43878a3a3f7c659fee3b6e16c334c3062 Mon Sep 17 00:00:00 2001
From: Amitkumar Karwar <akarwar@marvell.com>
Date: Thu, 27 Feb 2014 19:35:17 -0800
Subject: mwifiex: stop AP at shutdown time

Deauth is sent to AP when the device is acting as station at
shutdown time. Similarly we should stop AP operation also.
mwifiex_deauthenticate() takes care closing the connection
based on provided interface type.

Add a new function to simplify the code.

Reported-by: Avery Pennarun <apenwarr@gmail.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/join.c | 15 ++++++++++++++-
 drivers/net/wireless/mwifiex/main.h |  1 +
 drivers/net/wireless/mwifiex/pcie.c |  7 +------
 drivers/net/wireless/mwifiex/sdio.c |  7 +------
 drivers/net/wireless/mwifiex/usb.c  |  8 ++------
 5 files changed, 19 insertions(+), 19 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/join.c b/drivers/net/wireless/mwifiex/join.c
index e9bd43526d80..89dc62a467f4 100644
--- a/drivers/net/wireless/mwifiex/join.c
+++ b/drivers/net/wireless/mwifiex/join.c
@@ -1443,7 +1443,20 @@ int mwifiex_deauthenticate(struct mwifiex_private *priv, u8 *mac)
 
 	return ret;
 }
-EXPORT_SYMBOL_GPL(mwifiex_deauthenticate);
+
+/* This function deauthenticates/disconnects from all BSS. */
+void mwifiex_deauthenticate_all(struct mwifiex_adapter *adapter)
+{
+	struct mwifiex_private *priv;
+	int i;
+
+	for (i = 0; i < adapter->priv_num; i++) {
+		priv = adapter->priv[i];
+		if (priv)
+			mwifiex_deauthenticate(priv, NULL);
+	}
+}
+EXPORT_SYMBOL_GPL(mwifiex_deauthenticate_all);
 
 /*
  * This function converts band to radio type used in channel TLV.
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index 6c04baa5bcf9..e9d64fc7d786 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -927,6 +927,7 @@ int mwifiex_ret_802_11_associate(struct mwifiex_private *priv,
 void mwifiex_reset_connect_state(struct mwifiex_private *priv, u16 reason);
 u8 mwifiex_band_to_radio_type(u8 band);
 int mwifiex_deauthenticate(struct mwifiex_private *priv, u8 *mac);
+void mwifiex_deauthenticate_all(struct mwifiex_adapter *adapter);
 int mwifiex_adhoc_start(struct mwifiex_private *priv,
 			struct cfg80211_ssid *adhoc_ssid);
 int mwifiex_adhoc_join(struct mwifiex_private *priv,
diff --git a/drivers/net/wireless/mwifiex/pcie.c b/drivers/net/wireless/mwifiex/pcie.c
index 92c31b5c269c..d2af2127b41a 100644
--- a/drivers/net/wireless/mwifiex/pcie.c
+++ b/drivers/net/wireless/mwifiex/pcie.c
@@ -211,7 +211,6 @@ static void mwifiex_pcie_remove(struct pci_dev *pdev)
 	struct pcie_service_card *card;
 	struct mwifiex_adapter *adapter;
 	struct mwifiex_private *priv;
-	int i;
 
 	card = pci_get_drvdata(pdev);
 	if (!card)
@@ -230,11 +229,7 @@ static void mwifiex_pcie_remove(struct pci_dev *pdev)
 			mwifiex_pcie_resume(&pdev->dev);
 #endif
 
-		for (i = 0; i < adapter->priv_num; i++)
-			if ((GET_BSS_ROLE(adapter->priv[i]) ==
-			     MWIFIEX_BSS_ROLE_STA) &&
-			    adapter->priv[i]->media_connected)
-				mwifiex_deauthenticate(adapter->priv[i], NULL);
+		mwifiex_deauthenticate_all(adapter);
 
 		priv = mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY);
 
diff --git a/drivers/net/wireless/mwifiex/sdio.c b/drivers/net/wireless/mwifiex/sdio.c
index d5661a6209be..e0dcd3ed7a69 100644
--- a/drivers/net/wireless/mwifiex/sdio.c
+++ b/drivers/net/wireless/mwifiex/sdio.c
@@ -166,7 +166,6 @@ mwifiex_sdio_remove(struct sdio_func *func)
 	struct sdio_mmc_card *card;
 	struct mwifiex_adapter *adapter;
 	struct mwifiex_private *priv;
-	int i;
 
 	pr_debug("info: SDIO func num=%d\n", func->num);
 
@@ -185,11 +184,7 @@ mwifiex_sdio_remove(struct sdio_func *func)
 		if (adapter->is_suspended)
 			mwifiex_sdio_resume(adapter->dev);
 
-		for (i = 0; i < adapter->priv_num; i++)
-			if ((GET_BSS_ROLE(adapter->priv[i]) ==
-						MWIFIEX_BSS_ROLE_STA) &&
-			    adapter->priv[i]->media_connected)
-				mwifiex_deauthenticate(adapter->priv[i], NULL);
+		mwifiex_deauthenticate_all(adapter);
 
 		priv = mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY);
 		mwifiex_disable_auto_ds(priv);
diff --git a/drivers/net/wireless/mwifiex/usb.c b/drivers/net/wireless/mwifiex/usb.c
index 21d1316adaa0..93d5d73c4800 100644
--- a/drivers/net/wireless/mwifiex/usb.c
+++ b/drivers/net/wireless/mwifiex/usb.c
@@ -1036,7 +1036,6 @@ static void mwifiex_usb_cleanup_module(void)
 
 	if (usb_card && usb_card->adapter) {
 		struct mwifiex_adapter *adapter = usb_card->adapter;
-		int i;
 
 		/* In case driver is removed when asynchronous FW downloading is
 		 * in progress
@@ -1047,11 +1046,8 @@ static void mwifiex_usb_cleanup_module(void)
 		if (adapter->is_suspended)
 			mwifiex_usb_resume(usb_card->intf);
 #endif
-		for (i = 0; i < adapter->priv_num; i++)
-			if ((GET_BSS_ROLE(adapter->priv[i]) ==
-			     MWIFIEX_BSS_ROLE_STA) &&
-			    adapter->priv[i]->media_connected)
-				mwifiex_deauthenticate(adapter->priv[i], NULL);
+
+		mwifiex_deauthenticate_all(adapter);
 
 		mwifiex_init_shutdown_fw(mwifiex_get_priv(adapter,
 							  MWIFIEX_BSS_ROLE_ANY),
-- 
cgit v1.2.2


From 81c7883c46fddd53b7a98c3659ffae21189ae4ab Mon Sep 17 00:00:00 2001
From: Hante Meuleman <meuleman@broadcom.com>
Date: Tue, 25 Feb 2014 20:30:35 +0100
Subject: brcmfmac: Put frame sdio tx error handling in sub function.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 112 ++++++---------------
 1 file changed, 33 insertions(+), 79 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index 0ccb7affeb04..c894ee358153 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -1237,6 +1237,28 @@ static void brcmf_sdio_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx)
 	bus->cur_read.len = 0;
 }
 
+static void brcmf_sdio_txfail(struct brcmf_sdio *bus)
+{
+	struct brcmf_sdio_dev *sdiodev = bus->sdiodev;
+	u8 i, hi, lo;
+
+	/* On failure, abort the command and terminate the frame */
+	brcmf_err("sdio error, abort command and terminate frame\n");
+	bus->sdcnt.tx_sderrs++;
+
+	brcmf_sdiod_abort(sdiodev, SDIO_FUNC_2);
+	brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_FRAMECTRL, SFC_WF_TERM, NULL);
+	bus->sdcnt.f1regdata++;
+
+	for (i = 0; i < 3; i++) {
+		hi = brcmf_sdiod_regrb(sdiodev, SBSDIO_FUNC1_WFRAMEBCHI, NULL);
+		lo = brcmf_sdiod_regrb(sdiodev, SBSDIO_FUNC1_WFRAMEBCLO, NULL);
+		bus->sdcnt.f1regdata += 2;
+		if ((hi == 0) && (lo == 0))
+			break;
+	}
+}
+
 /* return total length of buffer chain */
 static uint brcmf_sdio_glom_len(struct brcmf_sdio *bus)
 {
@@ -2252,7 +2274,6 @@ static int brcmf_sdio_txpkt(struct brcmf_sdio *bus, struct sk_buff_head *pktq,
 			    uint chan)
 {
 	int ret;
-	int i;
 	struct sk_buff *pkt_next, *tmp;
 
 	brcmf_dbg(TRACE, "Enter\n");
@@ -2265,28 +2286,9 @@ static int brcmf_sdio_txpkt(struct brcmf_sdio *bus, struct sk_buff_head *pktq,
 	ret = brcmf_sdiod_send_pkt(bus->sdiodev, pktq);
 	bus->sdcnt.f2txdata++;
 
-	if (ret < 0) {
-		/* On failure, abort the command and terminate the frame */
-		brcmf_dbg(INFO, "sdio error %d, abort command and terminate frame\n",
-			  ret);
-		bus->sdcnt.tx_sderrs++;
+	if (ret < 0)
+		brcmf_sdio_txfail(bus);
 
-		brcmf_sdiod_abort(bus->sdiodev, SDIO_FUNC_2);
-		brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL,
-				  SFC_WF_TERM, NULL);
-		bus->sdcnt.f1regdata++;
-
-		for (i = 0; i < 3; i++) {
-			u8 hi, lo;
-			hi = brcmf_sdiod_regrb(bus->sdiodev,
-					       SBSDIO_FUNC1_WFRAMEBCHI, NULL);
-			lo = brcmf_sdiod_regrb(bus->sdiodev,
-					       SBSDIO_FUNC1_WFRAMEBCLO, NULL);
-			bus->sdcnt.f1regdata += 2;
-			if ((hi == 0) && (lo == 0))
-				break;
-		}
-	}
 	sdio_release_host(bus->sdiodev->func[1]);
 
 done:
@@ -2588,42 +2590,17 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus)
 	brcmf_sdio_clrintr(bus);
 
 	if (data_ok(bus) && bus->ctrl_frame_stat &&
-		(bus->clkstate == CLK_AVAIL)) {
-		int i;
+	    (bus->clkstate == CLK_AVAIL)) {
 
 		sdio_claim_host(bus->sdiodev->func[1]);
 		err = brcmf_sdiod_send_buf(bus->sdiodev, bus->ctrl_frame_buf,
 					   (u32)bus->ctrl_frame_len);
 
-		if (err < 0) {
-			/* On failure, abort the command and
-				terminate the frame */
-			brcmf_dbg(INFO, "sdio error %d, abort command and terminate frame\n",
-				  err);
-			bus->sdcnt.tx_sderrs++;
-
-			brcmf_sdiod_abort(bus->sdiodev, SDIO_FUNC_2);
-
-			brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL,
-					  SFC_WF_TERM, &err);
-			bus->sdcnt.f1regdata++;
-
-			for (i = 0; i < 3; i++) {
-				u8 hi, lo;
-				hi = brcmf_sdiod_regrb(bus->sdiodev,
-						       SBSDIO_FUNC1_WFRAMEBCHI,
-						       &err);
-				lo = brcmf_sdiod_regrb(bus->sdiodev,
-						       SBSDIO_FUNC1_WFRAMEBCLO,
-						       &err);
-				bus->sdcnt.f1regdata += 2;
-				if ((hi == 0) && (lo == 0))
-					break;
-			}
-
-		} else {
+		if (err < 0)
+			brcmf_sdio_txfail(bus);
+		else
 			bus->tx_seq = (bus->tx_seq + 1) % SDPCM_SEQ_WRAP;
-		}
+
 		sdio_release_host(bus->sdiodev->func[1]);
 		bus->ctrl_frame_stat = false;
 		brcmf_sdio_wait_event_wakeup(bus);
@@ -2793,38 +2770,15 @@ break2:
 
 static int brcmf_sdio_tx_frame(struct brcmf_sdio *bus, u8 *frame, u16 len)
 {
-	int i;
 	int ret;
 
 	bus->ctrl_frame_stat = false;
 	ret = brcmf_sdiod_send_buf(bus->sdiodev, frame, len);
 
-	if (ret < 0) {
-		/* On failure, abort the command and terminate the frame */
-		brcmf_dbg(INFO, "sdio error %d, abort command and terminate frame\n",
-			  ret);
-		bus->sdcnt.tx_sderrs++;
-
-		brcmf_sdiod_abort(bus->sdiodev, SDIO_FUNC_2);
-
-		brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL,
-				  SFC_WF_TERM, NULL);
-		bus->sdcnt.f1regdata++;
-
-		for (i = 0; i < 3; i++) {
-			u8 hi, lo;
-			hi = brcmf_sdiod_regrb(bus->sdiodev,
-					       SBSDIO_FUNC1_WFRAMEBCHI, NULL);
-			lo = brcmf_sdiod_regrb(bus->sdiodev,
-					       SBSDIO_FUNC1_WFRAMEBCLO, NULL);
-			bus->sdcnt.f1regdata += 2;
-			if (hi == 0 && lo == 0)
-				break;
-		}
-		return ret;
-	}
-
-	bus->tx_seq = (bus->tx_seq + 1) % SDPCM_SEQ_WRAP;
+	if (ret < 0)
+		brcmf_sdio_txfail(bus);
+	else
+		bus->tx_seq = (bus->tx_seq + 1) % SDPCM_SEQ_WRAP;
 
 	return ret;
 }
-- 
cgit v1.2.2


From 4aca7a185aeba4472e7a798e5d834d7702ebbeca Mon Sep 17 00:00:00 2001
From: Daniel Kim <dekim@broadcom.com>
Date: Tue, 25 Feb 2014 20:30:36 +0100
Subject: brcmfmac: Correct mcs index report

There is a mismatch between the mcs index(0-7) reported to cfg80211
and the actual mcs index(0-15) in use. This patch resolves the mismatch
by setting mcs info with the number of chains read from FW.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Signed-off-by: Daniel Kim <dekim@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
index 474df2ce6e3b..00bd1e16c3ce 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
@@ -5306,6 +5306,8 @@ static s32 brcmf_update_wiphybands(struct brcmf_cfg80211_info *cfg)
 	u32 band_list[3];
 	u32 nmode;
 	u32 bw_cap[2] = { 0, 0 };
+	u32 rxchain;
+	u32 nchain;
 	s8 phy;
 	s32 err;
 	u32 nband;
@@ -5342,6 +5344,16 @@ static s32 brcmf_update_wiphybands(struct brcmf_cfg80211_info *cfg)
 	brcmf_dbg(INFO, "nmode=%d, bw_cap=(%d, %d)\n", nmode,
 		  bw_cap[IEEE80211_BAND_2GHZ], bw_cap[IEEE80211_BAND_5GHZ]);
 
+	err = brcmf_fil_iovar_int_get(ifp, "rxchain", &rxchain);
+	if (err) {
+		brcmf_err("rxchain error (%d)\n", err);
+		nchain = 1;
+	} else {
+		for (nchain = 0; rxchain; nchain++)
+			rxchain = rxchain & (rxchain - 1);
+	}
+	brcmf_dbg(INFO, "nchain=%d\n", nchain);
+
 	err = brcmf_construct_reginfo(cfg, bw_cap);
 	if (err) {
 		brcmf_err("brcmf_construct_reginfo failed (%d)\n", err);
@@ -5370,10 +5382,7 @@ static s32 brcmf_update_wiphybands(struct brcmf_cfg80211_info *cfg)
 		band->ht_cap.ht_supported = true;
 		band->ht_cap.ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K;
 		band->ht_cap.ampdu_density = IEEE80211_HT_MPDU_DENSITY_16;
-		/* An HT shall support all EQM rates for one spatial
-		 * stream
-		 */
-		band->ht_cap.mcs.rx_mask[0] = 0xff;
+		memset(band->ht_cap.mcs.rx_mask, 0xff, nchain);
 		band->ht_cap.mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED;
 		bands[band->band] = band;
 	}
-- 
cgit v1.2.2


From af1fa210f4fc6e304b859b386a3c8a266b1110ab Mon Sep 17 00:00:00 2001
From: Arend van Spriel <arend@broadcom.com>
Date: Thu, 27 Feb 2014 19:25:00 +0100
Subject: brcmfmac: use pre-allocated scatter-gather table for txglomming

Instead of allocating a scatter-gather table for every transmit
reuse a pre-allocated table. The transmit path will be faster by
taking out this allocation.

Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c   | 47 +++++++++++++++++-----
 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c |  8 +---
 .../net/wireless/brcm80211/brcmfmac/sdio_host.h    |  2 +
 3 files changed, 41 insertions(+), 16 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
index 07e7d2520257..9eea7d4dd501 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
@@ -53,6 +53,12 @@
 /* Maximum milliseconds to wait for F2 to come up */
 #define SDIO_WAIT_F2RDY	3000
 
+#define BRCMF_DEFAULT_TXGLOM_SIZE	32  /* max tx frames in glom chain */
+#define BRCMF_DEFAULT_RXGLOM_SIZE	32  /* max rx frames in glom chain */
+
+static int brcmf_sdiod_txglomsz = BRCMF_DEFAULT_TXGLOM_SIZE;
+module_param_named(txglomsz, brcmf_sdiod_txglomsz, int, 0);
+MODULE_PARM_DESC(txglomsz, "maximum tx packet chain size [SDIO]");
 
 static irqreturn_t brcmf_sdiod_oob_irqhandler(int irq, void *dev_id)
 {
@@ -487,7 +493,6 @@ static int brcmf_sdiod_sglist_rw(struct brcmf_sdio_dev *sdiodev, uint fn,
 	struct mmc_request mmc_req;
 	struct mmc_command mmc_cmd;
 	struct mmc_data mmc_dat;
-	struct sg_table st;
 	struct scatterlist *sgl;
 	int ret = 0;
 
@@ -532,16 +537,11 @@ static int brcmf_sdiod_sglist_rw(struct brcmf_sdio_dev *sdiodev, uint fn,
 	pkt_offset = 0;
 	pkt_next = target_list->next;
 
-	if (sg_alloc_table(&st, max_seg_cnt, GFP_KERNEL)) {
-		ret = -ENOMEM;
-		goto exit;
-	}
-
 	memset(&mmc_req, 0, sizeof(struct mmc_request));
 	memset(&mmc_cmd, 0, sizeof(struct mmc_command));
 	memset(&mmc_dat, 0, sizeof(struct mmc_data));
 
-	mmc_dat.sg = st.sgl;
+	mmc_dat.sg = sdiodev->sgtable.sgl;
 	mmc_dat.blksz = func_blk_sz;
 	mmc_dat.flags = write ? MMC_DATA_WRITE : MMC_DATA_READ;
 	mmc_cmd.opcode = SD_IO_RW_EXTENDED;
@@ -557,7 +557,7 @@ static int brcmf_sdiod_sglist_rw(struct brcmf_sdio_dev *sdiodev, uint fn,
 	while (seg_sz) {
 		req_sz = 0;
 		sg_cnt = 0;
-		sgl = st.sgl;
+		sgl = sdiodev->sgtable.sgl;
 		/* prep sg table */
 		while (pkt_next != (struct sk_buff *)target_list) {
 			pkt_data = pkt_next->data + pkt_offset;
@@ -639,7 +639,7 @@ static int brcmf_sdiod_sglist_rw(struct brcmf_sdio_dev *sdiodev, uint fn,
 	}
 
 exit:
-	sg_free_table(&st);
+	sg_init_table(sdiodev->sgtable.sgl, sdiodev->sgtable.orig_nents);
 	while ((pkt_next = __skb_dequeue(&local_list)) != NULL)
 		brcmu_pkt_buf_free_skb(pkt_next);
 
@@ -863,6 +863,29 @@ int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, uint fn)
 	return 0;
 }
 
+static void brcmf_sdiod_sgtable_alloc(struct brcmf_sdio_dev *sdiodev)
+{
+	uint nents;
+	int err;
+
+	if (!sdiodev->sg_support)
+		return;
+
+	nents = max_t(uint, BRCMF_DEFAULT_RXGLOM_SIZE, brcmf_sdiod_txglomsz);
+	nents += (nents >> 4) + 1;
+
+	WARN_ON(nents > sdiodev->max_segment_count);
+
+	brcmf_dbg(TRACE, "nents=%d\n", nents);
+	err = sg_alloc_table(&sdiodev->sgtable, nents, GFP_KERNEL);
+	if (err < 0) {
+		brcmf_err("allocation failed: disable scatter-gather");
+		sdiodev->sg_support = false;
+	}
+
+	sdiodev->txglomsz = brcmf_sdiod_txglomsz;
+}
+
 static int brcmf_sdiod_remove(struct brcmf_sdio_dev *sdiodev)
 {
 	if (sdiodev->bus) {
@@ -880,6 +903,7 @@ static int brcmf_sdiod_remove(struct brcmf_sdio_dev *sdiodev)
 	sdio_disable_func(sdiodev->func[1]);
 	sdio_release_host(sdiodev->func[1]);
 
+	sg_free_table(&sdiodev->sgtable);
 	sdiodev->sbwad = 0;
 
 	return 0;
@@ -935,6 +959,11 @@ static int brcmf_sdiod_probe(struct brcmf_sdio_dev *sdiodev)
 					   SG_MAX_SINGLE_ALLOC);
 	sdiodev->max_segment_size = host->max_seg_size;
 
+	/* allocate scatter-gather table. sg support
+	 * will be disabled upon allocation failure.
+	 */
+	brcmf_sdiod_sgtable_alloc(sdiodev);
+
 	/* try to attach to the target device */
 	sdiodev->bus = brcmf_sdio_probe(sdiodev);
 	if (!sdiodev->bus) {
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index c894ee358153..b5ded8a57cb0 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -113,8 +113,6 @@ struct rte_console {
 #define BRCMF_TXBOUND	20	/* Default for max tx frames in
 				 one scheduling */
 
-#define BRCMF_DEFAULT_TXGLOM_SIZE	32  /* max tx frames in glom chain */
-
 #define BRCMF_TXMINMAX	1	/* Max tx frames if rx still pending */
 
 #define MEMBLOCK	2048	/* Block size used for downloading
@@ -511,10 +509,6 @@ static const uint max_roundup = 512;
 
 #define ALIGNMENT  4
 
-static int brcmf_sdio_txglomsz = BRCMF_DEFAULT_TXGLOM_SIZE;
-module_param_named(txglomsz, brcmf_sdio_txglomsz, int, 0);
-MODULE_PARM_DESC(txglomsz, "maximum tx packet chain size [SDIO]");
-
 enum brcmf_sdio_frmtype {
 	BRCMF_SDIO_FT_NORMAL,
 	BRCMF_SDIO_FT_SUPER,
@@ -2321,7 +2315,7 @@ static uint brcmf_sdio_sendfromq(struct brcmf_sdio *bus, uint maxframes)
 		__skb_queue_head_init(&pktq);
 		if (bus->txglom)
 			pkt_num = min_t(u8, bus->tx_max - bus->tx_seq,
-					brcmf_sdio_txglomsz);
+					bus->sdiodev->txglomsz);
 		pkt_num = min_t(u32, pkt_num,
 				brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol));
 		spin_lock_bh(&bus->txqlock);
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
index 5e53eb1b2ffa..3deab7959a0d 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
@@ -180,6 +180,8 @@ struct brcmf_sdio_dev {
 	uint max_request_size;
 	ushort max_segment_count;
 	uint max_segment_size;
+	uint txglomsz;
+	struct sg_table sgtable;
 };
 
 /* sdio core registers */
-- 
cgit v1.2.2


From 38ec3f3f6142d1517ce0f1c96502fd1c05d2fc52 Mon Sep 17 00:00:00 2001
From: Amitkumar Karwar <akarwar@marvell.com>
Date: Thu, 27 Feb 2014 19:35:15 -0800
Subject: mwifiex: block further commands after timeout

This patch adds a check in command preparation routine.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/cmdevt.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c
index 0958764d2bae..83195d96e78c 100644
--- a/drivers/net/wireless/mwifiex/cmdevt.c
+++ b/drivers/net/wireless/mwifiex/cmdevt.c
@@ -514,6 +514,11 @@ int mwifiex_send_cmd(struct mwifiex_private *priv, u16 cmd_no,
 		return -1;
 	}
 
+	if (adapter->num_cmd_timeout) {
+		dev_err(adapter->dev, "PREP_CMD: FW is in bad state\n");
+		return -1;
+	}
+
 	if (adapter->hw_status == MWIFIEX_HW_STATUS_RESET) {
 		if (cmd_no != HostCmd_CMD_FUNC_INIT) {
 			dev_err(adapter->dev, "PREP_CMD: FW in reset state\n");
-- 
cgit v1.2.2


From e50e06fd0418d5994fad8ca8d3ce049403059112 Mon Sep 17 00:00:00 2001
From: Amitkumar Karwar <akarwar@marvell.com>
Date: Thu, 27 Feb 2014 19:35:16 -0800
Subject: mwifiex: get rid of extra num_cmd_timeout variable

We already have one in mwifiex_adapter structure.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/cmdevt.c | 3 +--
 drivers/net/wireless/mwifiex/main.h   | 1 -
 drivers/net/wireless/mwifiex/util.c   | 2 +-
 3 files changed, 2 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c
index 83195d96e78c..686943c52d18 100644
--- a/drivers/net/wireless/mwifiex/cmdevt.c
+++ b/drivers/net/wireless/mwifiex/cmdevt.c
@@ -892,7 +892,6 @@ mwifiex_cmd_timeout_func(unsigned long function_context)
 	struct timeval tstamp;
 
 	adapter->num_cmd_timeout++;
-	adapter->dbg.num_cmd_timeout++;
 	if (!adapter->curr_cmd) {
 		dev_dbg(adapter->dev, "cmd: empty curr_cmd\n");
 		return;
@@ -916,7 +915,7 @@ mwifiex_cmd_timeout_func(unsigned long function_context)
 			adapter->dbg.num_cmd_host_to_card_failure);
 
 		dev_err(adapter->dev, "num_cmd_timeout = %d\n",
-			adapter->dbg.num_cmd_timeout);
+			adapter->num_cmd_timeout);
 		dev_err(adapter->dev, "num_tx_timeout = %d\n",
 			adapter->dbg.num_tx_timeout);
 
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index e9d64fc7d786..df09ddb64eec 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -145,7 +145,6 @@ struct mwifiex_dbg {
 	u32 num_cmd_assoc_success;
 	u32 num_cmd_assoc_failure;
 	u32 num_tx_timeout;
-	u32 num_cmd_timeout;
 	u16 timeout_cmd_id;
 	u16 timeout_cmd_act;
 	u16 last_cmd_id[DBG_CMD_NUM];
diff --git a/drivers/net/wireless/mwifiex/util.c b/drivers/net/wireless/mwifiex/util.c
index 098de8810729..7022c69f0a29 100644
--- a/drivers/net/wireless/mwifiex/util.c
+++ b/drivers/net/wireless/mwifiex/util.c
@@ -104,6 +104,7 @@ int mwifiex_get_debug_info(struct mwifiex_private *priv,
 		info->pm_wakeup_fw_try = adapter->pm_wakeup_fw_try;
 		info->is_hs_configured = adapter->is_hs_configured;
 		info->hs_activated = adapter->hs_activated;
+		info->num_cmd_timeout = adapter->num_cmd_timeout;
 		info->num_cmd_host_to_card_failure
 				= adapter->dbg.num_cmd_host_to_card_failure;
 		info->num_cmd_sleep_cfm_host_to_card_failure
@@ -119,7 +120,6 @@ int mwifiex_get_debug_info(struct mwifiex_private *priv,
 		info->num_cmd_assoc_failure =
 					adapter->dbg.num_cmd_assoc_failure;
 		info->num_tx_timeout = adapter->dbg.num_tx_timeout;
-		info->num_cmd_timeout = adapter->dbg.num_cmd_timeout;
 		info->timeout_cmd_id = adapter->dbg.timeout_cmd_id;
 		info->timeout_cmd_act = adapter->dbg.timeout_cmd_act;
 		memcpy(info->last_cmd_id, adapter->dbg.last_cmd_id,
-- 
cgit v1.2.2


From 0c9c4a09f752e3cbe47fd5ea2d7f5f4837f95580 Mon Sep 17 00:00:00 2001
From: Amitkumar Karwar <akarwar@marvell.com>
Date: Thu, 27 Feb 2014 19:35:17 -0800
Subject: mwifiex: replace num_cmd_timeout with is_cmd_timedout

Command timeout happens when firmware goes into bad state.
There is no chance that next command will be successful after
this. Hence we will maintain a flag instead of count.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/README      |  2 +-
 drivers/net/wireless/mwifiex/cmdevt.c    | 10 +++++-----
 drivers/net/wireless/mwifiex/debugfs.c   |  4 ++--
 drivers/net/wireless/mwifiex/ioctl.h     |  2 +-
 drivers/net/wireless/mwifiex/main.h      |  2 +-
 drivers/net/wireless/mwifiex/sta_event.c |  2 +-
 drivers/net/wireless/mwifiex/util.c      |  2 +-
 7 files changed, 12 insertions(+), 12 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/README b/drivers/net/wireless/mwifiex/README
index 3d64613ebb29..b9242c3dca43 100644
--- a/drivers/net/wireless/mwifiex/README
+++ b/drivers/net/wireless/mwifiex/README
@@ -131,7 +131,7 @@ info
 	hs_configured = <0/1, host sleep not configured/configured>
 	hs_activated = <0/1, extended host sleep not activated/activated>
 	num_tx_timeout = <number of Tx timeout>
-	num_cmd_timeout = <number of timeout commands>
+	is_cmd_timedout = <0/1 command timeout not occurred/occurred>
 	timeout_cmd_id = <command id of the last timeout command>
 	timeout_cmd_act = <command action of the last timeout command>
 	last_cmd_id = <command id of the last several commands sent to device>
diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c
index 686943c52d18..b4d28edaf8aa 100644
--- a/drivers/net/wireless/mwifiex/cmdevt.c
+++ b/drivers/net/wireless/mwifiex/cmdevt.c
@@ -514,7 +514,7 @@ int mwifiex_send_cmd(struct mwifiex_private *priv, u16 cmd_no,
 		return -1;
 	}
 
-	if (adapter->num_cmd_timeout) {
+	if (adapter->is_cmd_timedout) {
 		dev_err(adapter->dev, "PREP_CMD: FW is in bad state\n");
 		return -1;
 	}
@@ -780,7 +780,7 @@ int mwifiex_process_cmdresp(struct mwifiex_adapter *adapter)
 		return -1;
 	}
 
-	adapter->num_cmd_timeout = 0;
+	adapter->is_cmd_timedout = 0;
 
 	resp = (struct host_cmd_ds_command *) adapter->curr_cmd->resp_skb->data;
 	if (adapter->curr_cmd->cmd_flag & CMD_F_CANCELED) {
@@ -891,7 +891,7 @@ mwifiex_cmd_timeout_func(unsigned long function_context)
 	struct cmd_ctrl_node *cmd_node;
 	struct timeval tstamp;
 
-	adapter->num_cmd_timeout++;
+	adapter->is_cmd_timedout = 1;
 	if (!adapter->curr_cmd) {
 		dev_dbg(adapter->dev, "cmd: empty curr_cmd\n");
 		return;
@@ -914,8 +914,8 @@ mwifiex_cmd_timeout_func(unsigned long function_context)
 		dev_err(adapter->dev, "num_cmd_h2c_failure = %d\n",
 			adapter->dbg.num_cmd_host_to_card_failure);
 
-		dev_err(adapter->dev, "num_cmd_timeout = %d\n",
-			adapter->num_cmd_timeout);
+		dev_err(adapter->dev, "is_cmd_timedout = %d\n",
+			adapter->is_cmd_timedout);
 		dev_err(adapter->dev, "num_tx_timeout = %d\n",
 			adapter->dbg.num_tx_timeout);
 
diff --git a/drivers/net/wireless/mwifiex/debugfs.c b/drivers/net/wireless/mwifiex/debugfs.c
index a5f9875cfd6e..61b467a7ebdd 100644
--- a/drivers/net/wireless/mwifiex/debugfs.c
+++ b/drivers/net/wireless/mwifiex/debugfs.c
@@ -85,8 +85,8 @@ static struct mwifiex_debug_data items[] = {
 	 item_addr(hs_activated), 1},
 	{"num_tx_timeout", item_size(num_tx_timeout),
 	 item_addr(num_tx_timeout), 1},
-	{"num_cmd_timeout", item_size(num_cmd_timeout),
-	 item_addr(num_cmd_timeout), 1},
+	{"is_cmd_timedout", item_size(is_cmd_timedout),
+	 item_addr(is_cmd_timedout), 1},
 	{"timeout_cmd_id", item_size(timeout_cmd_id),
 	 item_addr(timeout_cmd_id), 1},
 	{"timeout_cmd_act", item_size(timeout_cmd_act),
diff --git a/drivers/net/wireless/mwifiex/ioctl.h b/drivers/net/wireless/mwifiex/ioctl.h
index 5974642f38b1..1fb2212079ae 100644
--- a/drivers/net/wireless/mwifiex/ioctl.h
+++ b/drivers/net/wireless/mwifiex/ioctl.h
@@ -209,7 +209,7 @@ struct mwifiex_debug_info {
 	u32 num_cmd_assoc_success;
 	u32 num_cmd_assoc_failure;
 	u32 num_tx_timeout;
-	u32 num_cmd_timeout;
+	u8 is_cmd_timedout;
 	u16 timeout_cmd_id;
 	u16 timeout_cmd_act;
 	u16 last_cmd_id[DBG_CMD_NUM];
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index df09ddb64eec..51ac9e3355a2 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -719,7 +719,7 @@ struct mwifiex_adapter {
 	struct cmd_ctrl_node *curr_cmd;
 	/* spin lock for command */
 	spinlock_t mwifiex_cmd_lock;
-	u32 num_cmd_timeout;
+	u8 is_cmd_timedout;
 	u16 last_init_cmd;
 	struct timer_list cmd_timer;
 	struct list_head cmd_free_q;
diff --git a/drivers/net/wireless/mwifiex/sta_event.c b/drivers/net/wireless/mwifiex/sta_event.c
index fd2a7165cfa5..368450cc56c7 100644
--- a/drivers/net/wireless/mwifiex/sta_event.c
+++ b/drivers/net/wireless/mwifiex/sta_event.c
@@ -116,7 +116,7 @@ mwifiex_reset_connect_state(struct mwifiex_private *priv, u16 reason_code)
 	adapter->tx_lock_flag = false;
 	adapter->pps_uapsd_mode = false;
 
-	if (adapter->num_cmd_timeout && adapter->curr_cmd)
+	if (adapter->is_cmd_timedout && adapter->curr_cmd)
 		return;
 	priv->media_connected = false;
 	dev_dbg(adapter->dev,
diff --git a/drivers/net/wireless/mwifiex/util.c b/drivers/net/wireless/mwifiex/util.c
index 7022c69f0a29..c3824e37f3f2 100644
--- a/drivers/net/wireless/mwifiex/util.c
+++ b/drivers/net/wireless/mwifiex/util.c
@@ -104,7 +104,7 @@ int mwifiex_get_debug_info(struct mwifiex_private *priv,
 		info->pm_wakeup_fw_try = adapter->pm_wakeup_fw_try;
 		info->is_hs_configured = adapter->is_hs_configured;
 		info->hs_activated = adapter->hs_activated;
-		info->num_cmd_timeout = adapter->num_cmd_timeout;
+		info->is_cmd_timedout = adapter->is_cmd_timedout;
 		info->num_cmd_host_to_card_failure
 				= adapter->dbg.num_cmd_host_to_card_failure;
 		info->num_cmd_sleep_cfm_host_to_card_failure
-- 
cgit v1.2.2


From a5333914536debe05f36ed0d0273f1ddab744eea Mon Sep 17 00:00:00 2001
From: Amitkumar Karwar <akarwar@marvell.com>
Date: Thu, 27 Feb 2014 19:35:18 -0800
Subject: mwifiex: update MCS information as per antenna settings

Even if the device is changed to 1X1 mode, data is sent with
higher MCS rates after association.

This patch fixes the problem by updating MCS information field
in HT capability when antenna setting changes so that correct
information will be advertised in association and probe request.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/cfg80211.c | 31 +++++++++++++++++++++++++++++--
 drivers/net/wireless/mwifiex/cfp.c      |  2 +-
 drivers/net/wireless/mwifiex/cmdevt.c   |  1 +
 drivers/net/wireless/mwifiex/fw.h       | 13 +++++++++++++
 drivers/net/wireless/mwifiex/main.h     |  1 +
 5 files changed, 45 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index bfe9316e196c..51ce99cfcfb9 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -1324,6 +1324,33 @@ mwifiex_cfg80211_set_antenna(struct wiphy *wiphy, u32 tx_ant, u32 rx_ant)
 			tx_ant = RF_ANTENNA_AUTO;
 			rx_ant = RF_ANTENNA_AUTO;
 		}
+	} else {
+		struct ieee80211_sta_ht_cap *ht_info;
+		int rx_mcs_supp;
+		enum ieee80211_band band;
+
+		if ((tx_ant == 0x1 && rx_ant == 0x1)) {
+			adapter->user_dev_mcs_support = HT_STREAM_1X1;
+			if (adapter->is_hw_11ac_capable)
+				adapter->usr_dot_11ac_mcs_support =
+						MWIFIEX_11AC_MCS_MAP_1X1;
+		} else {
+			adapter->user_dev_mcs_support = HT_STREAM_2X2;
+			if (adapter->is_hw_11ac_capable)
+				adapter->usr_dot_11ac_mcs_support =
+						MWIFIEX_11AC_MCS_MAP_2X2;
+		}
+
+		for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
+			if (!adapter->wiphy->bands[band])
+				continue;
+
+			ht_info = &adapter->wiphy->bands[band]->ht_cap;
+			rx_mcs_supp =
+				GET_RXMCSSUPP(adapter->user_dev_mcs_support);
+			memset(&ht_info->mcs, 0, adapter->number_of_antenna);
+			memset(&ht_info->mcs, 0xff, rx_mcs_supp);
+		}
 	}
 
 	ant_cfg.tx_ant = tx_ant;
@@ -2093,8 +2120,8 @@ mwifiex_setup_ht_caps(struct ieee80211_sta_ht_cap *ht_info,
 	ht_info->cap &= ~IEEE80211_HT_CAP_MAX_AMSDU;
 	ht_info->cap |= IEEE80211_HT_CAP_SM_PS;
 
-	rx_mcs_supp = GET_RXMCSSUPP(adapter->hw_dev_mcs_support);
-	/* Set MCS for 1x1 */
+	rx_mcs_supp = GET_RXMCSSUPP(adapter->user_dev_mcs_support);
+	/* Set MCS for 1x1/2x2 */
 	memset(mcs, 0xff, rx_mcs_supp);
 	/* Clear all the other values */
 	memset(&mcs[rx_mcs_supp], 0,
diff --git a/drivers/net/wireless/mwifiex/cfp.c b/drivers/net/wireless/mwifiex/cfp.c
index 2c3226bf86f8..0ddec3d4b059 100644
--- a/drivers/net/wireless/mwifiex/cfp.c
+++ b/drivers/net/wireless/mwifiex/cfp.c
@@ -253,7 +253,7 @@ u32 mwifiex_index_to_data_rate(struct mwifiex_private *priv,
 			       u8 index, u8 ht_info)
 {
 	u32 mcs_num_supp =
-		(priv->adapter->hw_dev_mcs_support == HT_STREAM_2X2) ? 16 : 8;
+		(priv->adapter->user_dev_mcs_support == HT_STREAM_2X2) ? 16 : 8;
 	u32 rate;
 
 	if (priv->adapter->is_hw_11ac_capable)
diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c
index b4d28edaf8aa..14e05c9f4663 100644
--- a/drivers/net/wireless/mwifiex/cmdevt.c
+++ b/drivers/net/wireless/mwifiex/cmdevt.c
@@ -1592,6 +1592,7 @@ int mwifiex_ret_get_hw_spec(struct mwifiex_private *priv,
 
 	adapter->hw_dot_11n_dev_cap = le32_to_cpu(hw_spec->dot_11n_dev_cap);
 	adapter->hw_dev_mcs_support = hw_spec->dev_mcs_support;
+	adapter->user_dev_mcs_support = adapter->hw_dev_mcs_support;
 
 	if (adapter->if_ops.update_mp_end_port)
 		adapter->if_ops.update_mp_end_port(adapter,
diff --git a/drivers/net/wireless/mwifiex/fw.h b/drivers/net/wireless/mwifiex/fw.h
index aa8abef58349..39cb3542f79c 100644
--- a/drivers/net/wireless/mwifiex/fw.h
+++ b/drivers/net/wireless/mwifiex/fw.h
@@ -236,8 +236,21 @@ enum MWIFIEX_802_11_PRIVACY_FILTER {
  */
 #define MWIFIEX_FW_DEF_HTTXCFG (BIT(1) | BIT(4) | BIT(5) | BIT(6))
 
+/* 11AC Tx and Rx MCS map for 1x1 mode:
+ * IEEE80211_VHT_MCS_SUPPORT_0_9 for stream 1
+ * IEEE80211_VHT_MCS_NOT_SUPPORTED for remaining 7 streams
+ */
+#define MWIFIEX_11AC_MCS_MAP_1X1	0xfffefffe
+
+/* 11AC Tx and Rx MCS map for 2x2 mode:
+ * IEEE80211_VHT_MCS_SUPPORT_0_9 for stream 1 and 2
+ * IEEE80211_VHT_MCS_NOT_SUPPORTED for remaining 6 streams
+ */
+#define MWIFIEX_11AC_MCS_MAP_2X2	0xfffafffa
+
 #define GET_RXMCSSUPP(DevMCSSupported) (DevMCSSupported & 0x0f)
 #define SETHT_MCS32(x) (x[4] |= 1)
+#define HT_STREAM_1X1	0x11
 #define HT_STREAM_2X2	0x22
 
 #define SET_SECONDARYCHAN(RadioType, SECCHAN) (RadioType |= (SECCHAN << 4))
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index 51ac9e3355a2..f0289c12e041 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -773,6 +773,7 @@ struct mwifiex_adapter {
 	u8 event_body[MAX_EVENT_SIZE];
 	u32 hw_dot_11n_dev_cap;
 	u8 hw_dev_mcs_support;
+	u8 user_dev_mcs_support;
 	u8 adhoc_11n_enabled;
 	u8 sec_chan_offset;
 	struct mwifiex_dbg dbg;
-- 
cgit v1.2.2


From 3e3831c4fdc53aabf3a56419ef6d96a841c52435 Mon Sep 17 00:00:00 2001
From: Arend van Spriel <arend@broadcom.com>
Date: Tue, 25 Feb 2014 20:30:38 +0100
Subject: brcmfmac: reset suspend flag upon sdio suspend failure

The suspend callback first sets the suspend flag used in the driver
but after that the actual suspend is done, which may fail. Reset the
flag upon suspend failure.

Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
index 9eea7d4dd501..4a6508e7e3a1 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
@@ -1101,9 +1101,7 @@ static int brcmf_ops_sdio_suspend(struct device *dev)
 	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
 	int ret = 0;
 
-	brcmf_dbg(SDIO, "\n");
-
-	atomic_set(&sdiodev->suspend, true);
+	brcmf_dbg(SDIO, "Enter\n");
 
 	sdio_flags = sdio_get_host_pm_caps(sdiodev->func[1]);
 	if (!(sdio_flags & MMC_PM_KEEP_POWER)) {
@@ -1111,9 +1109,12 @@ static int brcmf_ops_sdio_suspend(struct device *dev)
 		return -EINVAL;
 	}
 
+	atomic_set(&sdiodev->suspend, true);
+
 	ret = sdio_set_host_pm_flags(sdiodev->func[1], MMC_PM_KEEP_POWER);
 	if (ret) {
 		brcmf_err("Failed to set pm_flags\n");
+		atomic_set(&sdiodev->suspend, false);
 		return ret;
 	}
 
@@ -1127,6 +1128,7 @@ static int brcmf_ops_sdio_resume(struct device *dev)
 	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
 	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
 
+	brcmf_dbg(SDIO, "Enter\n");
 	brcmf_sdio_wd_timer(sdiodev->bus, BRCMF_WD_POLL_MS);
 	atomic_set(&sdiodev->suspend, false);
 	return 0;
-- 
cgit v1.2.2


From d1b44ce1a37ee667dfdd0770c6f0b08dae7ebad8 Mon Sep 17 00:00:00 2001
From: Jingoo Han <jg1.han@samsung.com>
Date: Fri, 28 Feb 2014 14:47:47 +0900
Subject: net: w5300: Use devm_ioremap_resource()

Use devm_ioremap_resource() in order to make the code simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/wiznet/w5300.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/wiznet/w5300.c b/drivers/net/ethernet/wiznet/w5300.c
index 71c27b3292f1..1f33c4c86c20 100644
--- a/drivers/net/ethernet/wiznet/w5300.c
+++ b/drivers/net/ethernet/wiznet/w5300.c
@@ -561,11 +561,10 @@ static int w5300_hw_probe(struct platform_device *pdev)
 	if (!mem)
 		return -ENXIO;
 	mem_size = resource_size(mem);
-	if (!devm_request_mem_region(&pdev->dev, mem->start, mem_size, name))
-		return -EBUSY;
-	priv->base = devm_ioremap(&pdev->dev, mem->start, mem_size);
-	if (!priv->base)
-		return -EBUSY;
+
+	priv->base = devm_ioremap_resource(&pdev->dev, mem);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
 
 	spin_lock_init(&priv->reg_lock);
 	priv->indirect = mem_size < W5300_BUS_DIRECT_SIZE;
-- 
cgit v1.2.2


From 4e76ca7f3e4c4b100f19b1bdfc1ed2b541d045e2 Mon Sep 17 00:00:00 2001
From: Jingoo Han <jg1.han@samsung.com>
Date: Fri, 28 Feb 2014 14:48:16 +0900
Subject: net: w5100: Use devm_ioremap_resource()

Use devm_ioremap_resource() in order to make the code simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/wiznet/w5100.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/wiznet/w5100.c b/drivers/net/ethernet/wiznet/w5100.c
index 0df36c6ec7f4..104d46f37969 100644
--- a/drivers/net/ethernet/wiznet/w5100.c
+++ b/drivers/net/ethernet/wiznet/w5100.c
@@ -641,11 +641,10 @@ static int w5100_hw_probe(struct platform_device *pdev)
 	if (!mem)
 		return -ENXIO;
 	mem_size = resource_size(mem);
-	if (!devm_request_mem_region(&pdev->dev, mem->start, mem_size, name))
-		return -EBUSY;
-	priv->base = devm_ioremap(&pdev->dev, mem->start, mem_size);
-	if (!priv->base)
-		return -EBUSY;
+
+	priv->base = devm_ioremap_resource(&pdev->dev, mem);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
 
 	spin_lock_init(&priv->reg_lock);
 	priv->indirect = mem_size < W5100_BUS_DIRECT_SIZE;
-- 
cgit v1.2.2


From 285727600fa3714051cda1c21f20a8a3842f3dd8 Mon Sep 17 00:00:00 2001
From: Veaceslav Falico <vfalico@redhat.com>
Date: Fri, 28 Feb 2014 12:39:19 +0100
Subject: bonding: send arp requests even if there's no route to them
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Currently we're only sending arp requests if we have a route to the target
(and, thus, can find out the source ip address).

There are some use cases, however, where we don't want/need to set an ip
address (or set up a specific route) for bonding to use arp monitoring *for
traffic generation*. We can easily send arp probes (arp requests with src
ip == 0) to generate arp broadcast responses from the target ip and use
them for determining if the target is up.

This, obviously, won't work with arp validation - because we don't have the
ip address set and, thus, will filter out the responses. So in that case -
print a warning.

CC: François CACHEREUL <f.cachereul@alphalink.fr>
CC: Zhenjie Chen <zhchen@redhat.com>
CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_main.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 12948b33451a..12861e37d526 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -2155,8 +2155,13 @@ static void bond_arp_send_all(struct bonding *bond, struct slave *slave)
 		rt = ip_route_output(dev_net(bond->dev), targets[i], 0,
 				     RTO_ONLINK, 0);
 		if (IS_ERR(rt)) {
-			pr_debug("%s: no route to arp_ip_target %pI4\n",
-				 bond->dev->name, &targets[i]);
+			/* there's no route to target - try to send arp
+			 * probe to generate any traffic (arp_validate=0)
+			 */
+			if (bond->params.arp_validate && net_ratelimit())
+				pr_warn("%s: no route to arp_ip_target %pI4 and arp_validate is set\n",
+					bond->dev->name, &targets[i]);
+			bond_arp_send(slave->dev, ARPOP_REQUEST, targets[i], 0, 0);
 			continue;
 		}
 
-- 
cgit v1.2.2


From 0391bbe3e4ca653d1b5e4d453e9a0a049726d0e6 Mon Sep 17 00:00:00 2001
From: Mark Rustad <mark.d.rustad@intel.com>
Date: Fri, 28 Feb 2014 15:48:55 -0800
Subject: ixgbe: Restore hw_addr in LER recovery paths

The hw_addr needs to be restored in the pcie recovery path or
else the device will be perpetually removed. Also restore the
value in the resume path.

Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index a345cc7b378c..3d576b29f1d1 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel 10 Gigabit PCI Express Linux driver
-  Copyright(c) 1999 - 2013 Intel Corporation.
+  Copyright(c) 1999 - 2014 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -67,7 +67,7 @@ static char ixgbe_default_device_descr[] =
 #define DRV_VERSION "3.19.1-k"
 const char ixgbe_driver_version[] = DRV_VERSION;
 static const char ixgbe_copyright[] =
-				"Copyright (c) 1999-2013 Intel Corporation.";
+				"Copyright (c) 1999-2014 Intel Corporation.";
 
 static const struct ixgbe_info *ixgbe_info_tbl[] = {
 	[board_82598] = &ixgbe_82598_info,
@@ -5508,6 +5508,7 @@ static int ixgbe_resume(struct pci_dev *pdev)
 	struct net_device *netdev = adapter->netdev;
 	u32 err;
 
+	adapter->hw.hw_addr = adapter->io_addr;
 	pci_set_power_state(pdev, PCI_D0);
 	pci_restore_state(pdev);
 	/*
@@ -8453,6 +8454,7 @@ static pci_ers_result_t ixgbe_io_slot_reset(struct pci_dev *pdev)
 		e_err(probe, "Cannot re-enable PCI device after reset.\n");
 		result = PCI_ERS_RESULT_DISCONNECT;
 	} else {
+		adapter->hw.hw_addr = adapter->io_addr;
 		pci_set_master(pdev);
 		pci_restore_state(pdev);
 		pci_save_state(pdev);
-- 
cgit v1.2.2


From 0edd2bdf63b10d0b6715f2fc4a9e598d6b8ca58f Mon Sep 17 00:00:00 2001
From: Mark Rustad <mark.d.rustad@intel.com>
Date: Fri, 28 Feb 2014 15:48:56 -0800
Subject: ixgbe: Fix up some ethtool results when adapter is removed

Some ethtool tests returned apparently good results when the
adapter was in a removed state. Fix that by checking for removal.
This also fixes two paths that could return uninitialized memory
in data[4].

Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
index 043307024c4a..f2d35c04159c 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel 10 Gigabit PCI Express Linux driver
-  Copyright(c) 1999 - 2013 Intel Corporation.
+  Copyright(c) 1999 - 2014 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -1247,6 +1247,11 @@ static int ixgbe_link_test(struct ixgbe_adapter *adapter, u64 *data)
 	struct ixgbe_hw *hw = &adapter->hw;
 	bool link_up;
 	u32 link_speed = 0;
+
+	if (ixgbe_removed(hw->hw_addr)) {
+		*data = 1;
+		return 1;
+	}
 	*data = 0;
 
 	hw->mac.ops.check_link(hw, &link_speed, &link_up, true);
@@ -1969,6 +1974,7 @@ static void ixgbe_diag_test(struct net_device *netdev,
 		data[1] = 1;
 		data[2] = 1;
 		data[3] = 1;
+		data[4] = 1;
 		eth_test->flags |= ETH_TEST_FL_FAILED;
 		return;
 	}
@@ -1988,6 +1994,7 @@ static void ixgbe_diag_test(struct net_device *netdev,
 					data[1] = 1;
 					data[2] = 1;
 					data[3] = 1;
+					data[4] = 1;
 					eth_test->flags |= ETH_TEST_FL_FAILED;
 					clear_bit(__IXGBE_TESTING,
 						  &adapter->state);
-- 
cgit v1.2.2


From 144384649dc136875375f83fe037aeac4e68a79a Mon Sep 17 00:00:00 2001
From: Mark Rustad <mark.d.rustad@intel.com>
Date: Fri, 28 Feb 2014 15:48:57 -0800
Subject: ixgbe: Check config reads for removal

Configuration space reads should also be checked for removal. So
add some checks related to config space accesses.

v2:
* Fixed indent

Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c  | 10 +++--
 drivers/net/ethernet/intel/ixgbe/ixgbe_common.c | 16 ++++---
 drivers/net/ethernet/intel/ixgbe/ixgbe_common.h |  6 ++-
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c   | 58 +++++++++++++++++++++++--
 4 files changed, 75 insertions(+), 15 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
index 10e563cb847a..15506f0780b2 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel 10 Gigabit PCI Express Linux driver
-  Copyright(c) 1999 - 2013 Intel Corporation.
+  Copyright(c) 1999 - 2014 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -61,6 +61,9 @@ static void ixgbe_set_pcie_completion_timeout(struct ixgbe_hw *hw)
 	u32 gcr = IXGBE_READ_REG(hw, IXGBE_GCR);
 	u16 pcie_devctl2;
 
+	if (ixgbe_removed(hw->hw_addr))
+		return;
+
 	/* only take action if timeout value is defaulted to 0 */
 	if (gcr & IXGBE_GCR_CMPL_TMOUT_MASK)
 		goto out;
@@ -79,8 +82,9 @@ static void ixgbe_set_pcie_completion_timeout(struct ixgbe_hw *hw)
 	 * directly in order to set the completion timeout value for
 	 * 16ms to 55ms
 	 */
-	pci_read_config_word(adapter->pdev,
-	                     IXGBE_PCI_DEVICE_CONTROL2, &pcie_devctl2);
+	pcie_devctl2 = ixgbe_read_pci_cfg_word(hw, IXGBE_PCI_DEVICE_CONTROL2);
+	if (ixgbe_removed(hw->hw_addr))
+		return;
 	pcie_devctl2 |= IXGBE_PCI_DEVICE_CONTROL2_16ms;
 	pci_write_config_word(adapter->pdev,
 	                      IXGBE_PCI_DEVICE_CONTROL2, pcie_devctl2);
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
index 263143f53b21..4456c235a44a 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel 10 Gigabit PCI Express Linux driver
-  Copyright(c) 1999 - 2013 Intel Corporation.
+  Copyright(c) 1999 - 2014 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -2487,7 +2487,6 @@ static u32 ixgbe_pcie_timeout_poll(struct ixgbe_hw *hw)
  **/
 static s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw)
 {
-	struct ixgbe_adapter *adapter = hw->back;
 	s32 status = 0;
 	u32 i, poll;
 	u16 value;
@@ -2496,7 +2495,8 @@ static s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw)
 	IXGBE_WRITE_REG(hw, IXGBE_CTRL, IXGBE_CTRL_GIO_DIS);
 
 	/* Exit if master requests are blocked */
-	if (!(IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_GIO))
+	if (!(IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_GIO) ||
+	    ixgbe_removed(hw->hw_addr))
 		goto out;
 
 	/* Poll for master request bit to clear */
@@ -2524,8 +2524,9 @@ static s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw)
 	poll = ixgbe_pcie_timeout_poll(hw);
 	for (i = 0; i < poll; i++) {
 		udelay(100);
-		pci_read_config_word(adapter->pdev, IXGBE_PCI_DEVICE_STATUS,
-							 &value);
+		value = ixgbe_read_pci_cfg_word(hw, IXGBE_PCI_DEVICE_STATUS);
+		if (ixgbe_removed(hw->hw_addr))
+			goto out;
 		if (!(value & IXGBE_PCI_DEVICE_STATUS_TRANSACTION_PENDING))
 			goto out;
 	}
@@ -2867,7 +2868,6 @@ san_mac_addr_clr:
  **/
 u16 ixgbe_get_pcie_msix_count_generic(struct ixgbe_hw *hw)
 {
-	struct ixgbe_adapter *adapter = hw->back;
 	u16 msix_count = 1;
 	u16 max_msix_count;
 	u16 pcie_offset;
@@ -2886,7 +2886,9 @@ u16 ixgbe_get_pcie_msix_count_generic(struct ixgbe_hw *hw)
 		return msix_count;
 	}
 
-	pci_read_config_word(adapter->pdev, pcie_offset, &msix_count);
+	msix_count = ixgbe_read_pci_cfg_word(hw, pcie_offset);
+	if (ixgbe_removed(hw->hw_addr))
+		msix_count = 0;
 	msix_count &= IXGBE_PCIE_MSIX_TBL_SZ_MASK;
 
 	/* MSI-X count is zero-based in HW */
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
index a042db2997f7..ef0fd4cef5df 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel 10 Gigabit PCI Express Linux driver
-  Copyright(c) 1999 - 2013 Intel Corporation.
+  Copyright(c) 1999 - 2014 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -128,6 +128,10 @@ s32 ixgbe_get_thermal_sensor_data_generic(struct ixgbe_hw *hw);
 s32 ixgbe_init_thermal_sensor_thresh_generic(struct ixgbe_hw *hw);
 
 #define IXGBE_FAILED_READ_REG 0xffffffffU
+#define IXGBE_FAILED_READ_CFG_DWORD 0xffffffffU
+#define IXGBE_FAILED_READ_CFG_WORD 0xffffU
+
+u16 ixgbe_read_pci_cfg_word(struct ixgbe_hw *hw, u32 reg);
 
 static inline bool ixgbe_removed(void __iomem *addr)
 {
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 3d576b29f1d1..72807431c88a 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -151,6 +151,8 @@ MODULE_DESCRIPTION("Intel(R) 10 Gigabit PCI Express Network Driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_VERSION);
 
+static bool ixgbe_check_cfg_remove(struct ixgbe_hw *hw, struct pci_dev *pdev);
+
 static int ixgbe_read_pci_cfg_word_parent(struct ixgbe_adapter *adapter,
 					  u32 reg, u16 *value)
 {
@@ -169,6 +171,9 @@ static int ixgbe_read_pci_cfg_word_parent(struct ixgbe_adapter *adapter,
 		return -1;
 
 	pcie_capability_read_word(parent_dev, reg, value);
+	if (*value == IXGBE_FAILED_READ_CFG_WORD &&
+	    ixgbe_check_cfg_remove(&adapter->hw, parent_dev))
+		return -1;
 	return 0;
 }
 
@@ -313,6 +318,48 @@ void ixgbe_check_remove(struct ixgbe_hw *hw, u32 reg)
 		ixgbe_remove_adapter(hw);
 }
 
+static bool ixgbe_check_cfg_remove(struct ixgbe_hw *hw, struct pci_dev *pdev)
+{
+	u16 value;
+
+	pci_read_config_word(pdev, PCI_VENDOR_ID, &value);
+	if (value == IXGBE_FAILED_READ_CFG_WORD) {
+		ixgbe_remove_adapter(hw);
+		return true;
+	}
+	return false;
+}
+
+u16 ixgbe_read_pci_cfg_word(struct ixgbe_hw *hw, u32 reg)
+{
+	struct ixgbe_adapter *adapter = hw->back;
+	u16 value;
+
+	if (ixgbe_removed(hw->hw_addr))
+		return IXGBE_FAILED_READ_CFG_WORD;
+	pci_read_config_word(adapter->pdev, reg, &value);
+	if (value == IXGBE_FAILED_READ_CFG_WORD &&
+	    ixgbe_check_cfg_remove(hw, adapter->pdev))
+		return IXGBE_FAILED_READ_CFG_WORD;
+	return value;
+}
+
+#ifdef CONFIG_PCI_IOV
+static u32 ixgbe_read_pci_cfg_dword(struct ixgbe_hw *hw, u32 reg)
+{
+	struct ixgbe_adapter *adapter = hw->back;
+	u32 value;
+
+	if (ixgbe_removed(hw->hw_addr))
+		return IXGBE_FAILED_READ_CFG_DWORD;
+	pci_read_config_dword(adapter->pdev, reg, &value);
+	if (value == IXGBE_FAILED_READ_CFG_DWORD &&
+	    ixgbe_check_cfg_remove(hw, adapter->pdev))
+		return IXGBE_FAILED_READ_CFG_DWORD;
+	return value;
+}
+#endif /* CONFIG_PCI_IOV */
+
 static void ixgbe_service_event_complete(struct ixgbe_adapter *adapter)
 {
 	BUG_ON(!test_bit(__IXGBE_SERVICE_SCHED, &adapter->state));
@@ -8339,6 +8386,7 @@ static pci_ers_result_t ixgbe_io_error_detected(struct pci_dev *pdev,
 	struct net_device *netdev = adapter->netdev;
 
 #ifdef CONFIG_PCI_IOV
+	struct ixgbe_hw *hw = &adapter->hw;
 	struct pci_dev *bdev, *vfdev;
 	u32 dw0, dw1, dw2, dw3;
 	int vf, pos;
@@ -8359,10 +8407,12 @@ static pci_ers_result_t ixgbe_io_error_detected(struct pci_dev *pdev,
 	if (!pos)
 		goto skip_bad_vf_detection;
 
-	pci_read_config_dword(bdev, pos + PCI_ERR_HEADER_LOG, &dw0);
-	pci_read_config_dword(bdev, pos + PCI_ERR_HEADER_LOG + 4, &dw1);
-	pci_read_config_dword(bdev, pos + PCI_ERR_HEADER_LOG + 8, &dw2);
-	pci_read_config_dword(bdev, pos + PCI_ERR_HEADER_LOG + 12, &dw3);
+	dw0 = ixgbe_read_pci_cfg_dword(hw, pos + PCI_ERR_HEADER_LOG);
+	dw1 = ixgbe_read_pci_cfg_dword(hw, pos + PCI_ERR_HEADER_LOG + 4);
+	dw2 = ixgbe_read_pci_cfg_dword(hw, pos + PCI_ERR_HEADER_LOG + 8);
+	dw3 = ixgbe_read_pci_cfg_dword(hw, pos + PCI_ERR_HEADER_LOG + 12);
+	if (ixgbe_removed(hw->hw_addr))
+		goto skip_bad_vf_detection;
 
 	req_id = dw1 >> 16;
 	/* On the 82599 if bit 7 of the requestor ID is set then it's a VF */
-- 
cgit v1.2.2


From 93501d48b887ee3e032c66ee2e11706497223842 Mon Sep 17 00:00:00 2001
From: Jacob Keller <jacob.e.keller@intel.com>
Date: Fri, 28 Feb 2014 15:48:58 -0800
Subject: ixgbe: implement SIOCGHWTSTAMP ioctl

This patch adds support for the new SIOCGHWTSTAMP ioctl, which enables a
process to determine the current timestamp configuration. In order to
implement this, store a copy of the timestamp configuration. In
addition, we can remove the 'int cmd' parameter as the new set_ts_config
function doesn't use it. I also fixed a typo in the function
description.

-v2
* Only save the settings after validating them

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe.h      |  5 +++--
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c |  4 +++-
 drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c  | 23 ++++++++++++++++++-----
 3 files changed, 24 insertions(+), 8 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
index cca13a5438e2..4371ef0ed4a0 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
@@ -765,6 +765,7 @@ struct ixgbe_adapter {
 	struct ptp_clock_info ptp_caps;
 	struct work_struct ptp_tx_work;
 	struct sk_buff *ptp_tx_skb;
+	struct hwtstamp_config tstamp_config;
 	unsigned long ptp_tx_start;
 	unsigned long last_overflow_check;
 	unsigned long last_rx_ptp_check;
@@ -957,8 +958,8 @@ static inline void ixgbe_ptp_rx_hwtstamp(struct ixgbe_ring *rx_ring,
 	rx_ring->last_rx_timestamp = jiffies;
 }
 
-int ixgbe_ptp_hwtstamp_ioctl(struct ixgbe_adapter *adapter, struct ifreq *ifr,
-			     int cmd);
+int ixgbe_ptp_set_ts_config(struct ixgbe_adapter *adapter, struct ifreq *ifr);
+int ixgbe_ptp_get_ts_config(struct ixgbe_adapter *adapter, struct ifreq *ifr);
 void ixgbe_ptp_start_cyclecounter(struct ixgbe_adapter *adapter);
 void ixgbe_ptp_reset(struct ixgbe_adapter *adapter);
 void ixgbe_ptp_check_pps_event(struct ixgbe_adapter *adapter, u32 eicr);
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 72807431c88a..10b35d82e309 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -7197,7 +7197,9 @@ static int ixgbe_ioctl(struct net_device *netdev, struct ifreq *req, int cmd)
 
 	switch (cmd) {
 	case SIOCSHWTSTAMP:
-		return ixgbe_ptp_hwtstamp_ioctl(adapter, req, cmd);
+		return ixgbe_ptp_set_ts_config(adapter, req);
+	case SIOCGHWTSTAMP:
+		return ixgbe_ptp_get_ts_config(adapter, req);
 	default:
 		return mdio_mii_ioctl(&adapter->hw.phy.mdio, if_mii(req), cmd);
 	}
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c
index 9e54fcc13bc9..9ef730f2916a 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c
@@ -576,14 +576,21 @@ void __ixgbe_ptp_rx_hwtstamp(struct ixgbe_q_vector *q_vector,
 	shhwtstamps->hwtstamp = ns_to_ktime(ns);
 }
 
+int ixgbe_ptp_get_ts_config(struct ixgbe_adapter *adapter, struct ifreq *ifr)
+{
+	struct hwtstamp_config *config = &adapter->tstamp_config;
+
+	return copy_to_user(ifr->ifr_data, config,
+			    sizeof(*config)) ? -EFAULT : 0;
+}
+
 /**
- * ixgbe_ptp_hwtstamp_ioctl - control hardware time stamping
+ * ixgbe_ptp_set_ts_config - control hardware time stamping
  * @adapter: pointer to adapter struct
  * @ifreq: ioctl data
- * @cmd: particular ioctl requested
  *
  * Outgoing time stamping can be enabled and disabled. Play nice and
- * disable it when requested, although it shouldn't case any overhead
+ * disable it when requested, although it shouldn't cause any overhead
  * when no packet needs it. At most one packet in the queue may be
  * marked for time stamping, otherwise it would be impossible to tell
  * for sure to which packet the hardware time stamp belongs.
@@ -599,8 +606,7 @@ void __ixgbe_ptp_rx_hwtstamp(struct ixgbe_q_vector *q_vector,
  * Event mode. This more accurately tells the user what the hardware is going
  * to do anyways.
  */
-int ixgbe_ptp_hwtstamp_ioctl(struct ixgbe_adapter *adapter,
-			     struct ifreq *ifr, int cmd)
+int ixgbe_ptp_set_ts_config(struct ixgbe_adapter *adapter, struct ifreq *ifr)
 {
 	struct ixgbe_hw *hw = &adapter->hw;
 	struct hwtstamp_config config;
@@ -702,6 +708,10 @@ int ixgbe_ptp_hwtstamp_ioctl(struct ixgbe_adapter *adapter,
 	regval = IXGBE_READ_REG(hw, IXGBE_TXSTMPH);
 	regval = IXGBE_READ_REG(hw, IXGBE_RXSTMPH);
 
+	/* save these settings for future reference */
+	memcpy(&adapter->tstamp_config, &config,
+	       sizeof(adapter->tstamp_config));
+
 	return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ?
 		-EFAULT : 0;
 }
@@ -809,6 +819,9 @@ void ixgbe_ptp_reset(struct ixgbe_adapter *adapter)
 	IXGBE_WRITE_REG(hw, IXGBE_SYSTIMH, 0x00000000);
 	IXGBE_WRITE_FLUSH(hw);
 
+	/* Reset the saved tstamp_config */
+	memset(&adapter->tstamp_config, 0, sizeof(adapter->tstamp_config));
+
 	ixgbe_ptp_start_cyclecounter(adapter);
 
 	spin_lock_irqsave(&adapter->tmreg_lock, flags);
-- 
cgit v1.2.2


From fd8daa45f2bd9b876e0dbb9503ccc5a5252844f2 Mon Sep 17 00:00:00 2001
From: Amir Vadai <amirv@mellanox.com>
Date: Sun, 2 Mar 2014 10:24:57 +0200
Subject: net/mlx4_en: Fix UP limit in ieee_ets->prio_tc

User priority limit has to be less than MLX4_EN_NUM_UP.

Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c b/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c
index b4881b686159..c95ca252187c 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c
@@ -62,7 +62,7 @@ static int mlx4_en_ets_validate(struct mlx4_en_priv *priv, struct ieee_ets *ets)
 	int has_ets_tc = 0;
 
 	for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) {
-		if (ets->prio_tc[i] > MLX4_EN_NUM_UP) {
+		if (ets->prio_tc[i] >= MLX4_EN_NUM_UP) {
 			en_err(priv, "Bad priority in UP <=> TC mapping. TC: %d, UP: %d\n",
 					i, ets->prio_tc[i]);
 			return -EINVAL;
-- 
cgit v1.2.2


From b97b33a3df0439401f80f041eda507d4fffa0dbf Mon Sep 17 00:00:00 2001
From: Eugenia Emantayev <eugenia@mellanox.com>
Date: Sun, 2 Mar 2014 10:24:58 +0200
Subject: net/mlx4_en: Verify mlx4_en module parameters

Verify mlx4_en module parameters.
In case they are out of range - reset to default values.

Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/mellanox/mlx4/en_main.c | 30 ++++++++++++++++++++++++++++
 drivers/net/ethernet/mellanox/mlx4/en_tx.c   | 21 +++++--------------
 drivers/net/ethernet/mellanox/mlx4/mlx4_en.h |  9 +++++++++
 3 files changed, 44 insertions(+), 16 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/mellanox/mlx4/en_main.c b/drivers/net/ethernet/mellanox/mlx4/en_main.c
index fa2f6e76f69b..3454437fcd95 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_main.c
@@ -72,6 +72,12 @@ MLX4_EN_PARM_INT(pfctx, 0, "Priority based Flow Control policy on TX[7:0]."
 MLX4_EN_PARM_INT(pfcrx, 0, "Priority based Flow Control policy on RX[7:0]."
 			   " Per priority bit mask");
 
+MLX4_EN_PARM_INT(inline_thold, MAX_INLINE,
+		 "Threshold for using inline data (range: 17-104, default: 104)");
+
+#define MAX_PFC_TX     0xff
+#define MAX_PFC_RX     0xff
+
 int en_print(const char *level, const struct mlx4_en_priv *priv,
 	     const char *format, ...)
 {
@@ -140,6 +146,7 @@ static int mlx4_en_get_profile(struct mlx4_en_dev *mdev)
 		params->prof[i].tx_ring_num = params->num_tx_rings_p_up *
 			MLX4_EN_NUM_UP;
 		params->prof[i].rss_rings = 0;
+		params->prof[i].inline_thold = inline_thold;
 	}
 
 	return 0;
@@ -325,8 +332,31 @@ static struct mlx4_interface mlx4_en_interface = {
 	.protocol	= MLX4_PROT_ETH,
 };
 
+void mlx4_en_verify_params(void)
+{
+	if (pfctx > MAX_PFC_TX) {
+		pr_warn("mlx4_en: WARNING: illegal module parameter pfctx 0x%x - should be in range 0-0x%x, will be changed to default (0)\n",
+			pfctx, MAX_PFC_TX);
+		pfctx = 0;
+	}
+
+	if (pfcrx > MAX_PFC_RX) {
+		pr_warn("mlx4_en: WARNING: illegal module parameter pfcrx 0x%x - should be in range 0-0x%x, will be changed to default (0)\n",
+			pfcrx, MAX_PFC_RX);
+		pfcrx = 0;
+	}
+
+	if (inline_thold < MIN_PKT_LEN || inline_thold > MAX_INLINE) {
+		pr_warn("mlx4_en: WARNING: illegal module parameter inline_thold %d - should be in range %d-%d, will be changed to default (%d)\n",
+			inline_thold, MIN_PKT_LEN, MAX_INLINE, MAX_INLINE);
+		inline_thold = MAX_INLINE;
+	}
+}
+
 static int __init mlx4_en_init(void)
 {
+	mlx4_en_verify_params();
+
 	return mlx4_register_interface(&mlx4_en_interface);
 }
 
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c
index 13457032d15f..8dc7637f5844 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c
@@ -44,16 +44,6 @@
 
 #include "mlx4_en.h"
 
-enum {
-	MAX_INLINE = 104, /* 128 - 16 - 4 - 4 */
-	MAX_BF = 256,
-};
-
-static int inline_thold __read_mostly = MAX_INLINE;
-
-module_param_named(inline_thold, inline_thold, int, 0444);
-MODULE_PARM_DESC(inline_thold, "threshold for using inline data");
-
 int mlx4_en_create_tx_ring(struct mlx4_en_priv *priv,
 			   struct mlx4_en_tx_ring **pring, int qpn, u32 size,
 			   u16 stride, int node, int queue_index)
@@ -75,8 +65,7 @@ int mlx4_en_create_tx_ring(struct mlx4_en_priv *priv,
 	ring->size = size;
 	ring->size_mask = size - 1;
 	ring->stride = stride;
-
-	inline_thold = min(inline_thold, MAX_INLINE);
+	ring->inline_thold = priv->prof->inline_thold;
 
 	tmp = size * sizeof(struct mlx4_en_tx_info);
 	ring->tx_info = vmalloc_node(tmp, node);
@@ -520,7 +509,7 @@ static struct mlx4_en_tx_desc *mlx4_en_bounce_to_desc(struct mlx4_en_priv *priv,
 	return ring->buf + index * TXBB_SIZE;
 }
 
-static int is_inline(struct sk_buff *skb, void **pfrag)
+static int is_inline(int inline_thold, struct sk_buff *skb, void **pfrag)
 {
 	void *ptr;
 
@@ -580,7 +569,7 @@ static int get_real_size(struct sk_buff *skb, struct net_device *dev,
 		}
 	} else {
 		*lso_header_size = 0;
-		if (!is_inline(skb, NULL))
+		if (!is_inline(priv->prof->inline_thold, skb, NULL))
 			real_size = CTRL_SIZE + (skb_shinfo(skb)->nr_frags + 1) * DS_SIZE;
 		else
 			real_size = inline_size(skb);
@@ -747,11 +736,11 @@ netdev_tx_t mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev)
 	tx_info->data_offset = (void *)data - (void *)tx_desc;
 
 	tx_info->linear = (lso_header_size < skb_headlen(skb) &&
-			   !is_inline(skb, NULL)) ? 1 : 0;
+			   !is_inline(ring->inline_thold, skb, NULL)) ? 1 : 0;
 
 	data += skb_shinfo(skb)->nr_frags + tx_info->linear - 1;
 
-	if (is_inline(skb, &fragptr)) {
+	if (is_inline(ring->inline_thold, skb, &fragptr)) {
 		tx_info->inl = 1;
 	} else {
 		/* Map fragments */
diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
index 3c25c7bf3dba..2610cc53fb4a 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
@@ -187,6 +187,13 @@ enum {
 #define GET_AVG_PERF_COUNTER(cnt)	(0)
 #endif /* MLX4_EN_PERF_STAT */
 
+/* Constants for TX flow */
+enum {
+	MAX_INLINE = 104, /* 128 - 16 - 4 - 4 */
+	MAX_BF = 256,
+	MIN_PKT_LEN = 17,
+};
+
 /*
  * Configurables
  */
@@ -271,6 +278,7 @@ struct mlx4_en_tx_ring {
 	bool bf_enabled;
 	struct netdev_queue *tx_queue;
 	int hwtstamp_tx_type;
+	int inline_thold;
 };
 
 struct mlx4_en_rx_desc {
@@ -346,6 +354,7 @@ struct mlx4_en_port_profile {
 	u8 tx_pause;
 	u8 tx_ppp;
 	int rss_rings;
+	int inline_thold;
 };
 
 struct mlx4_en_profile {
-- 
cgit v1.2.2


From 93591aaa62f89820f4ae0558f01eaf9a359738da Mon Sep 17 00:00:00 2001
From: Eugenia Emantayev <eugenia@mellanox.com>
Date: Sun, 2 Mar 2014 10:24:59 +0200
Subject: net/mlx4_en: Pad ethernet packets smaller than 17 bytes

Hardware can't accept packets smaller than 17 bytes. Therefore need to
pad with zeros.

Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/mellanox/mlx4/en_tx.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c
index 8dc7637f5844..781ebca81d0e 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c
@@ -585,7 +585,13 @@ static void build_inline_wqe(struct mlx4_en_tx_desc *tx_desc, struct sk_buff *sk
 	int spc = MLX4_INLINE_ALIGN - CTRL_SIZE - sizeof *inl;
 
 	if (skb->len <= spc) {
-		inl->byte_count = cpu_to_be32(1 << 31 | skb->len);
+		if (likely(skb->len >= MIN_PKT_LEN)) {
+			inl->byte_count = cpu_to_be32(1 << 31 | skb->len);
+		} else {
+			inl->byte_count = cpu_to_be32(1 << 31 | MIN_PKT_LEN);
+			memset(((void *)(inl + 1)) + skb->len, 0,
+			       MIN_PKT_LEN - skb->len);
+		}
 		skb_copy_from_linear_data(skb, inl + 1, skb_headlen(skb));
 		if (skb_shinfo(skb)->nr_frags)
 			memcpy(((void *)(inl + 1)) + skb_headlen(skb), fragptr,
-- 
cgit v1.2.2


From 15bffdffccb3204eb1e993f60eee65c439a03136 Mon Sep 17 00:00:00 2001
From: Eugenia Emantayev <eugenia@mellanox.com>
Date: Sun, 2 Mar 2014 10:25:00 +0200
Subject: net/mlx4_en: Move queue stopped/waked counters to be per ring

Give accurate counters and avoids cache misses when several rings
update the counters of stop/wake queue.

Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/mellanox/mlx4/en_port.c | 6 ++++++
 drivers/net/ethernet/mellanox/mlx4/en_tx.c   | 6 +++---
 drivers/net/ethernet/mellanox/mlx4/mlx4_en.h | 2 ++
 3 files changed, 11 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/mellanox/mlx4/en_port.c b/drivers/net/ethernet/mellanox/mlx4/en_port.c
index dae1a1f4ae55..c2cfb05e7290 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_port.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_port.c
@@ -148,10 +148,16 @@ int mlx4_en_DUMP_ETH_STATS(struct mlx4_en_dev *mdev, u8 port, u8 reset)
 	stats->tx_packets = 0;
 	stats->tx_bytes = 0;
 	priv->port_stats.tx_chksum_offload = 0;
+	priv->port_stats.queue_stopped = 0;
+	priv->port_stats.wake_queue = 0;
+
 	for (i = 0; i < priv->tx_ring_num; i++) {
 		stats->tx_packets += priv->tx_ring[i]->packets;
 		stats->tx_bytes += priv->tx_ring[i]->bytes;
 		priv->port_stats.tx_chksum_offload += priv->tx_ring[i]->tx_csum;
+		priv->port_stats.queue_stopped +=
+			priv->tx_ring[i]->queue_stopped;
+		priv->port_stats.wake_queue += priv->tx_ring[i]->wake_queue;
 	}
 
 	stats->rx_errors = be64_to_cpu(mlx4_en_stats->PCS) +
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c
index 781ebca81d0e..56e8fbc128f8 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c
@@ -445,7 +445,7 @@ static int mlx4_en_process_tx_cq(struct net_device *dev,
 	 */
 	if (netif_tx_queue_stopped(ring->tx_queue) && txbbs_skipped > 0) {
 		netif_tx_wake_queue(ring->tx_queue);
-		priv->port_stats.wake_queue++;
+		ring->wake_queue++;
 	}
 	return done;
 }
@@ -691,7 +691,7 @@ netdev_tx_t mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev)
 		     ring->size - HEADROOM - MAX_DESC_TXBBS)) {
 		/* every full Tx ring stops queue */
 		netif_tx_stop_queue(ring->tx_queue);
-		priv->port_stats.queue_stopped++;
+		ring->queue_stopped++;
 
 		/* If queue was emptied after the if, and before the
 		 * stop_queue - need to wake the queue, or else it will remain
@@ -704,7 +704,7 @@ netdev_tx_t mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev)
 		if (unlikely(((int)(ring->prod - ring->cons)) <=
 			     ring->size - HEADROOM - MAX_DESC_TXBBS)) {
 			netif_tx_wake_queue(ring->tx_queue);
-			priv->port_stats.wake_queue++;
+			ring->wake_queue++;
 		} else {
 			return NETDEV_TX_BUSY;
 		}
diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
index 2610cc53fb4a..c59011d4e830 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
@@ -274,6 +274,8 @@ struct mlx4_en_tx_ring {
 	unsigned long bytes;
 	unsigned long packets;
 	unsigned long tx_csum;
+	unsigned long queue_stopped;
+	unsigned long wake_queue;
 	struct mlx4_bf bf;
 	bool bf_enabled;
 	struct netdev_queue *tx_queue;
-- 
cgit v1.2.2


From 9813337a4b16ea5b1701b1d00f7e410f5decdfa5 Mon Sep 17 00:00:00 2001
From: Eugenia Emantayev <eugenia@mellanox.com>
Date: Sun, 2 Mar 2014 10:25:01 +0200
Subject: net/mlx4: Replace mlx4_en_mac_to_u64() with mlx4_mac_to_u64()

Currently, the EN driver uses a private static function
mlx4_en_mac_to_u64(). Move it to a common include file (driver.h)
for mlx4_en and mlx4_ib for further use.

Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 32 ++++++++------------------
 drivers/net/ethernet/mellanox/mlx4/mlx4_en.h   |  1 -
 2 files changed, 10 insertions(+), 23 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
index 2c0823bf3e05..3db594614fd3 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
@@ -603,7 +603,7 @@ static int mlx4_en_get_qp(struct mlx4_en_priv *priv)
 	int err = 0;
 	u64 reg_id;
 	int *qpn = &priv->base_qpn;
-	u64 mac = mlx4_en_mac_to_u64(priv->dev->dev_addr);
+	u64 mac = mlx4_mac_to_u64(priv->dev->dev_addr);
 
 	en_dbg(DRV, priv, "Registering MAC: %pM for adding\n",
 	       priv->dev->dev_addr);
@@ -672,7 +672,7 @@ static void mlx4_en_put_qp(struct mlx4_en_priv *priv)
 	u64 mac;
 
 	if (dev->caps.steering_mode == MLX4_STEERING_MODE_A0) {
-		mac = mlx4_en_mac_to_u64(priv->dev->dev_addr);
+		mac = mlx4_mac_to_u64(priv->dev->dev_addr);
 		en_dbg(DRV, priv, "Registering MAC: %pM for deleting\n",
 		       priv->dev->dev_addr);
 		mlx4_unregister_mac(dev, priv->port, mac);
@@ -685,7 +685,7 @@ static void mlx4_en_put_qp(struct mlx4_en_priv *priv)
 		for (i = 0; i < MLX4_EN_MAC_HASH_SIZE; ++i) {
 			bucket = &priv->mac_hash[i];
 			hlist_for_each_entry_safe(entry, tmp, bucket, hlist) {
-				mac = mlx4_en_mac_to_u64(entry->mac);
+				mac = mlx4_mac_to_u64(entry->mac);
 				en_dbg(DRV, priv, "Registering MAC: %pM for deleting\n",
 				       entry->mac);
 				mlx4_en_uc_steer_release(priv, entry->mac,
@@ -715,14 +715,14 @@ static int mlx4_en_replace_mac(struct mlx4_en_priv *priv, int qpn,
 	struct mlx4_en_dev *mdev = priv->mdev;
 	struct mlx4_dev *dev = mdev->dev;
 	int err = 0;
-	u64 new_mac_u64 = mlx4_en_mac_to_u64(new_mac);
+	u64 new_mac_u64 = mlx4_mac_to_u64(new_mac);
 
 	if (dev->caps.steering_mode != MLX4_STEERING_MODE_A0) {
 		struct hlist_head *bucket;
 		unsigned int mac_hash;
 		struct mlx4_mac_entry *entry;
 		struct hlist_node *tmp;
-		u64 prev_mac_u64 = mlx4_en_mac_to_u64(prev_mac);
+		u64 prev_mac_u64 = mlx4_mac_to_u64(prev_mac);
 
 		bucket = &priv->mac_hash[prev_mac[MLX4_EN_MAC_HASH_IDX]];
 		hlist_for_each_entry_safe(entry, tmp, bucket, hlist) {
@@ -751,18 +751,6 @@ static int mlx4_en_replace_mac(struct mlx4_en_priv *priv, int qpn,
 	return __mlx4_replace_mac(dev, priv->port, qpn, new_mac_u64);
 }
 
-u64 mlx4_en_mac_to_u64(u8 *addr)
-{
-	u64 mac = 0;
-	int i;
-
-	for (i = 0; i < ETH_ALEN; i++) {
-		mac <<= 8;
-		mac |= addr[i];
-	}
-	return mac;
-}
-
 static int mlx4_en_do_set_mac(struct mlx4_en_priv *priv)
 {
 	int err = 0;
@@ -1081,7 +1069,7 @@ static void mlx4_en_do_multicast(struct mlx4_en_priv *priv,
 		mlx4_en_cache_mclist(dev);
 		netif_addr_unlock_bh(dev);
 		list_for_each_entry(mclist, &priv->mc_list, list) {
-			mcast_addr = mlx4_en_mac_to_u64(mclist->addr);
+			mcast_addr = mlx4_mac_to_u64(mclist->addr);
 			mlx4_SET_MCAST_FLTR(mdev->dev, priv->port,
 					    mcast_addr, 0, MLX4_MCAST_CONFIG);
 		}
@@ -1173,7 +1161,7 @@ static void mlx4_en_do_uc_filter(struct mlx4_en_priv *priv,
 				found = true;
 
 			if (!found) {
-				mac = mlx4_en_mac_to_u64(entry->mac);
+				mac = mlx4_mac_to_u64(entry->mac);
 				mlx4_en_uc_steer_release(priv, entry->mac,
 							 priv->base_qpn,
 							 entry->reg_id);
@@ -1216,7 +1204,7 @@ static void mlx4_en_do_uc_filter(struct mlx4_en_priv *priv,
 				priv->flags |= MLX4_EN_FLAG_FORCE_PROMISC;
 				break;
 			}
-			mac = mlx4_en_mac_to_u64(ha->addr);
+			mac = mlx4_mac_to_u64(ha->addr);
 			memcpy(entry->mac, ha->addr, ETH_ALEN);
 			err = mlx4_register_mac(mdev->dev, priv->port, mac);
 			if (err < 0) {
@@ -2206,7 +2194,7 @@ static int mlx4_en_set_vf_mac(struct net_device *dev, int queue, u8 *mac)
 {
 	struct mlx4_en_priv *en_priv = netdev_priv(dev);
 	struct mlx4_en_dev *mdev = en_priv->mdev;
-	u64 mac_u64 = mlx4_en_mac_to_u64(mac);
+	u64 mac_u64 = mlx4_mac_to_u64(mac);
 
 	if (!is_valid_ether_addr(mac))
 		return -EINVAL;
@@ -2407,7 +2395,7 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
 		if (mlx4_is_slave(priv->mdev->dev)) {
 			eth_hw_addr_random(dev);
 			en_warn(priv, "Assigned random MAC address %pM\n", dev->dev_addr);
-			mac_u64 = mlx4_en_mac_to_u64(dev->dev_addr);
+			mac_u64 = mlx4_mac_to_u64(dev->dev_addr);
 			mdev->dev->caps.def_mac[priv->port] = mac_u64;
 		} else {
 			en_err(priv, "Port: %d, invalid mac burned: %pM, quiting\n",
diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
index c59011d4e830..4ff7da83c4b3 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
@@ -797,7 +797,6 @@ void mlx4_en_cleanup_filters(struct mlx4_en_priv *priv);
 
 #define MLX4_EN_NUM_SELF_TEST	5
 void mlx4_en_ex_selftest(struct net_device *dev, u32 *flags, u64 *buf);
-u64 mlx4_en_mac_to_u64(u8 *addr);
 void mlx4_en_ptp_overflow_check(struct mlx4_en_dev *mdev);
 
 /*
-- 
cgit v1.2.2


From 313c2d375b1c9b648d9d4b96ec1b8185ac6a78c5 Mon Sep 17 00:00:00 2001
From: Amir Vadai <amirv@mellanox.com>
Date: Sun, 2 Mar 2014 10:25:02 +0200
Subject: net/mlx4_en: Fix selftest failing on non 10G link speed

Connect-X devices selftest speed test shouldn't fail on 1G and 40G link
speeds.

Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/mellanox/mlx4/en_selftest.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/mellanox/mlx4/en_selftest.c b/drivers/net/ethernet/mellanox/mlx4/en_selftest.c
index c11d063473e5..03e5f6ac67e7 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_selftest.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_selftest.c
@@ -129,8 +129,10 @@ static int mlx4_en_test_speed(struct mlx4_en_priv *priv)
 	if (mlx4_en_QUERY_PORT(priv->mdev, priv->port))
 		return -ENOMEM;
 
-	/* The device currently only supports 10G speed */
-	if (priv->port_state.link_speed != SPEED_10000)
+	/* The device supports 1G, 10G and 40G speeds */
+	if (priv->port_state.link_speed != 1000 &&
+	    priv->port_state.link_speed != 10000 &&
+	    priv->port_state.link_speed != 40000)
 		return priv->port_state.link_speed;
 	return 0;
 }
-- 
cgit v1.2.2


From 28d222bbaa5122fb4bb0e607e39ab149a010e587 Mon Sep 17 00:00:00 2001
From: Eyal Perry <eyalpe@mellanox.com>
Date: Sun, 2 Mar 2014 10:25:03 +0200
Subject: net/mlx4_core: Fix sparse warning

This patch force conversion to u32 to fix the following sparse warning:
drivers/net/ethernet/mellanox/mlx4/fw.c:1822:53: warning: restricted __be32
degrades to integer

Casting to u32 is safe here, because token will be returned as is
from the hardware without any modification.

Signed-off-by: Eyal Perry <eyalpe@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/mellanox/mlx4/fw.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/mellanox/mlx4/fw.c b/drivers/net/ethernet/mellanox/mlx4/fw.c
index 91b69ff4b4a2..9cdf452140da 100644
--- a/drivers/net/ethernet/mellanox/mlx4/fw.c
+++ b/drivers/net/ethernet/mellanox/mlx4/fw.c
@@ -1890,7 +1890,8 @@ void mlx4_opreq_action(struct work_struct *work)
 			err = EINVAL;
 			break;
 		}
-		err = mlx4_cmd(dev, 0, ((u32) err | cpu_to_be32(token) << 16),
+		err = mlx4_cmd(dev, 0, ((u32) err |
+					(__force u32)cpu_to_be32(token) << 16),
 			       1, MLX4_CMD_GET_OP_REQ, MLX4_CMD_TIME_CLASS_A,
 			       MLX4_CMD_NATIVE);
 		if (err) {
-- 
cgit v1.2.2


From ec5709403e6893acb4f7ca40514ebd29c3116836 Mon Sep 17 00:00:00 2001
From: Amir Vadai <amirv@mellanox.com>
Date: Sun, 2 Mar 2014 10:25:04 +0200
Subject: net/mlx4_en: Use union for BlueFlame WQE

When BlueFlame is turned on, control segment of the TX WQE is changed,
and the second line of it is used for QPN.
Changed code to use a union in the mlx4_wqe_ctrl_seg instead of casting.
This makes the code clearer and solves the static checker warning:

drivers/net/ethernet/mellanox/mlx4/en_tx.c:839 mlx4_en_xmit()
	warn: potential memory corrupting cast 4 vs 2 bytes

CC: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/mellanox/mlx4/en_tx.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c
index 56e8fbc128f8..69c2fcef9d4c 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c
@@ -876,7 +876,8 @@ netdev_tx_t mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev)
 	skb_tx_timestamp(skb);
 
 	if (ring->bf_enabled && desc_size <= MAX_BF && !bounce && !vlan_tx_tag_present(skb)) {
-		*(__be32 *) (&tx_desc->ctrl.vlan_tag) |= cpu_to_be32(ring->doorbell_qpn);
+		tx_desc->ctrl.bf_qpn |= cpu_to_be32(ring->doorbell_qpn);
+
 		op_own |= htonl((bf_index & 0xffff) << 8);
 		/* Ensure new descirptor hits memory
 		* before setting ownership of this descriptor to HW */
-- 
cgit v1.2.2


From 9717218bb2982f5f214d84473c70542f1e42bfd7 Mon Sep 17 00:00:00 2001
From: Eyal Perry <eyalpe@mellanox.com>
Date: Sun, 2 Mar 2014 10:25:05 +0200
Subject: net/mlx4_en: Change Connect-X description in kconfig

The mlx4_en driver support also 1Gbit and 40Gbit Ethernet devices,
changed the driver description in the menuconfig to reflect that.

Signed-off-by: Eyal Perry <eyalpe@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/mellanox/mlx4/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/mellanox/mlx4/Kconfig b/drivers/net/ethernet/mellanox/mlx4/Kconfig
index 563495d8975a..1a6e1887a171 100644
--- a/drivers/net/ethernet/mellanox/mlx4/Kconfig
+++ b/drivers/net/ethernet/mellanox/mlx4/Kconfig
@@ -3,7 +3,7 @@
 #
 
 config MLX4_EN
-	tristate "Mellanox Technologies 10Gbit Ethernet support"
+	tristate "Mellanox Technologies 1/10/40Gbit Ethernet support"
 	depends on PCI
 	select MLX4_CORE
 	select PTP_1588_CLOCK
-- 
cgit v1.2.2


From 69244e5656b9d78964f11158680140e7994789d5 Mon Sep 17 00:00:00 2001
From: Ben Greear <greearb@candelatech.com>
Date: Thu, 27 Feb 2014 18:50:00 +0200
Subject: ath10k: add vdev-id, return code to error codes

When using multiple vdevs (stations, aps, etc), it is
nice to be able to associate log messages with specific
interfaces.  So, add vdev-id to most logging messages.
Add return code as well, where it was missing.

kvalo: unify some of the messages to follow the same style

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/mac.c | 201 +++++++++++++++++++---------------
 1 file changed, 115 insertions(+), 86 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 9230ad5e0f87..511a2f81e7af 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -323,13 +323,15 @@ static int ath10k_peer_create(struct ath10k *ar, u32 vdev_id, const u8 *addr)
 
 	ret = ath10k_wmi_peer_create(ar, vdev_id, addr);
 	if (ret) {
-		ath10k_warn("Failed to create wmi peer: %i\n", ret);
+		ath10k_warn("Failed to create wmi peer %pM on vdev %i: %i\n",
+			    addr, vdev_id, ret);
 		return ret;
 	}
 
 	ret = ath10k_wait_for_peer_created(ar, vdev_id, addr);
 	if (ret) {
-		ath10k_warn("Failed to wait for created wmi peer: %i\n", ret);
+		ath10k_warn("Failed to wait for created wmi peer %pM on vdev %i: %i\n",
+			    addr, vdev_id, ret);
 		return ret;
 	}
 	spin_lock_bh(&ar->data_lock);
@@ -349,7 +351,8 @@ static int ath10k_mac_set_kickout(struct ath10k_vif *arvif)
 	ret = ath10k_wmi_pdev_set_param(ar, param,
 					ATH10K_KICKOUT_THRESHOLD);
 	if (ret) {
-		ath10k_warn("Failed to set kickout threshold: %d\n", ret);
+		ath10k_warn("Failed to set kickout threshold on vdev %i: %d\n",
+			    arvif->vdev_id, ret);
 		return ret;
 	}
 
@@ -357,8 +360,8 @@ static int ath10k_mac_set_kickout(struct ath10k_vif *arvif)
 	ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, param,
 					ATH10K_KEEPALIVE_MIN_IDLE);
 	if (ret) {
-		ath10k_warn("Failed to set keepalive minimum idle time : %d\n",
-			    ret);
+		ath10k_warn("Failed to set keepalive minimum idle time on vdev %i : %d\n",
+			    arvif->vdev_id, ret);
 		return ret;
 	}
 
@@ -366,8 +369,8 @@ static int ath10k_mac_set_kickout(struct ath10k_vif *arvif)
 	ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, param,
 					ATH10K_KEEPALIVE_MAX_IDLE);
 	if (ret) {
-		ath10k_warn("Failed to set keepalive maximum idle time: %d\n",
-			    ret);
+		ath10k_warn("Failed to set keepalive maximum idle time on vdev %i: %d\n",
+			    arvif->vdev_id, ret);
 		return ret;
 	}
 
@@ -375,8 +378,8 @@ static int ath10k_mac_set_kickout(struct ath10k_vif *arvif)
 	ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, param,
 					ATH10K_KEEPALIVE_MAX_UNRESPONSIVE);
 	if (ret) {
-		ath10k_warn("Failed to set keepalive maximum unresponsive time: %d\n",
-			    ret);
+		ath10k_warn("Failed to set keepalive maximum unresponsive time on vdev %i: %d\n",
+			    arvif->vdev_id, ret);
 		return ret;
 	}
 
@@ -529,13 +532,15 @@ static int ath10k_vdev_start(struct ath10k_vif *arvif)
 
 	ret = ath10k_wmi_vdev_start(ar, &arg);
 	if (ret) {
-		ath10k_warn("WMI vdev start failed: ret %d\n", ret);
+		ath10k_warn("WMI vdev %i start failed: ret %d\n",
+			    arg.vdev_id, ret);
 		return ret;
 	}
 
 	ret = ath10k_vdev_setup_sync(ar);
 	if (ret) {
-		ath10k_warn("vdev setup failed %d\n", ret);
+		ath10k_warn("vdev %i setup failed %d\n",
+			    arg.vdev_id, ret);
 		return ret;
 	}
 
@@ -553,13 +558,15 @@ static int ath10k_vdev_stop(struct ath10k_vif *arvif)
 
 	ret = ath10k_wmi_vdev_stop(ar, arvif->vdev_id);
 	if (ret) {
-		ath10k_warn("WMI vdev stop failed: ret %d\n", ret);
+		ath10k_warn("WMI vdev %i stop failed: ret %d\n",
+			    arvif->vdev_id, ret);
 		return ret;
 	}
 
 	ret = ath10k_vdev_setup_sync(ar);
 	if (ret) {
-		ath10k_warn("vdev setup failed %d\n", ret);
+		ath10k_warn("vdev %i setup sync failed %d\n",
+			    arvif->vdev_id, ret);
 		return ret;
 	}
 
@@ -597,19 +604,22 @@ static int ath10k_monitor_start(struct ath10k *ar, int vdev_id)
 
 	ret = ath10k_wmi_vdev_start(ar, &arg);
 	if (ret) {
-		ath10k_warn("Monitor vdev start failed: ret %d\n", ret);
+		ath10k_warn("Monitor vdev %i start failed: ret %d\n",
+			    vdev_id, ret);
 		return ret;
 	}
 
 	ret = ath10k_vdev_setup_sync(ar);
 	if (ret) {
-		ath10k_warn("Monitor vdev setup failed %d\n", ret);
+		ath10k_warn("Monitor vdev %i setup failed %d\n",
+			    vdev_id, ret);
 		return ret;
 	}
 
 	ret = ath10k_wmi_vdev_up(ar, vdev_id, 0, ar->mac_addr);
 	if (ret) {
-		ath10k_warn("Monitor vdev up failed: %d\n", ret);
+		ath10k_warn("Monitor vdev %i up failed: %d\n",
+			    vdev_id, ret);
 		goto vdev_stop;
 	}
 
@@ -621,7 +631,8 @@ static int ath10k_monitor_start(struct ath10k *ar, int vdev_id)
 vdev_stop:
 	ret = ath10k_wmi_vdev_stop(ar, ar->monitor_vdev_id);
 	if (ret)
-		ath10k_warn("Monitor vdev stop failed: %d\n", ret);
+		ath10k_warn("Monitor vdev %i stop failed: %d\n",
+			    ar->monitor_vdev_id, ret);
 
 	return ret;
 }
@@ -644,15 +655,18 @@ static int ath10k_monitor_stop(struct ath10k *ar)
 
 	ret = ath10k_wmi_vdev_down(ar, ar->monitor_vdev_id);
 	if (ret)
-		ath10k_warn("Monitor vdev down failed: %d\n", ret);
+		ath10k_warn("Monitor vdev %i down failed: %d\n",
+			    ar->monitor_vdev_id, ret);
 
 	ret = ath10k_wmi_vdev_stop(ar, ar->monitor_vdev_id);
 	if (ret)
-		ath10k_warn("Monitor vdev stop failed: %d\n", ret);
+		ath10k_warn("Monitor vdev %i stop failed: %d\n",
+			    ar->monitor_vdev_id, ret);
 
 	ret = ath10k_vdev_setup_sync(ar);
 	if (ret)
-		ath10k_warn("Monitor_down sync failed: %d\n", ret);
+		ath10k_warn("Monitor_down sync failed, vdev %i: %d\n",
+			    ar->monitor_vdev_id, ret);
 
 	ar->monitor_enabled = false;
 	return ret;
@@ -682,7 +696,8 @@ static int ath10k_monitor_create(struct ath10k *ar)
 				     WMI_VDEV_TYPE_MONITOR,
 				     0, ar->mac_addr);
 	if (ret) {
-		ath10k_warn("WMI vdev monitor create failed: ret %d\n", ret);
+		ath10k_warn("WMI vdev %i monitor create failed: ret %d\n",
+			    ar->monitor_vdev_id, ret);
 		goto vdev_fail;
 	}
 
@@ -711,7 +726,8 @@ static int ath10k_monitor_destroy(struct ath10k *ar)
 
 	ret = ath10k_wmi_vdev_delete(ar, ar->monitor_vdev_id);
 	if (ret) {
-		ath10k_warn("WMI vdev monitor delete failed: %d\n", ret);
+		ath10k_warn("WMI vdev %i monitor delete failed: %d\n",
+			    ar->monitor_vdev_id, ret);
 		return ret;
 	}
 
@@ -864,8 +880,8 @@ static void ath10k_control_beaconing(struct ath10k_vif *arvif,
 	ret = ath10k_wmi_vdev_up(arvif->ar, arvif->vdev_id, arvif->aid,
 				 arvif->bssid);
 	if (ret) {
-		ath10k_warn("Failed to bring up VDEV: %d\n",
-			    arvif->vdev_id);
+		ath10k_warn("Failed to bring up vdev %d: %i\n",
+			    arvif->vdev_id, ret);
 		ath10k_vdev_stop(arvif);
 		return;
 	}
@@ -945,8 +961,8 @@ static int ath10k_mac_vif_setup_ps(struct ath10k_vif *arvif)
 		ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id, param,
 						  conf->dynamic_ps_timeout);
 		if (ret) {
-			ath10k_warn("Failed to set inactivity time for VDEV: %d\n",
-				    arvif->vdev_id);
+			ath10k_warn("Failed to set inactivity time for vdev %d: %i\n",
+				    arvif->vdev_id, ret);
 			return ret;
 		}
 	} else {
@@ -1198,8 +1214,8 @@ static int ath10k_peer_assoc_qos_ap(struct ath10k *ar,
 						 WMI_AP_PS_PEER_PARAM_UAPSD,
 						 uapsd);
 		if (ret) {
-			ath10k_warn("failed to set ap ps peer param uapsd: %d\n",
-				    ret);
+			ath10k_warn("failed to set ap ps peer param uapsd for vdev %i: %d\n",
+				    arvif->vdev_id, ret);
 			return ret;
 		}
 
@@ -1208,8 +1224,8 @@ static int ath10k_peer_assoc_qos_ap(struct ath10k *ar,
 						 WMI_AP_PS_PEER_PARAM_MAX_SP,
 						 max_sp);
 		if (ret) {
-			ath10k_warn("failed to set ap ps peer param max sp: %d\n",
-				    ret);
+			ath10k_warn("failed to set ap ps peer param max sp for vdev %i: %d\n",
+				    arvif->vdev_id, ret);
 			return ret;
 		}
 
@@ -1220,8 +1236,8 @@ static int ath10k_peer_assoc_qos_ap(struct ath10k *ar,
 		ret = ath10k_wmi_set_ap_ps_param(ar, arvif->vdev_id, sta->addr,
 					WMI_AP_PS_PEER_PARAM_AGEOUT_TIME, 10);
 		if (ret) {
-			ath10k_warn("failed to set ap ps peer param ageout time: %d\n",
-				    ret);
+			ath10k_warn("failed to set ap ps peer param ageout time for vdev %i: %d\n",
+				    arvif->vdev_id, ret);
 			return ret;
 		}
 	}
@@ -1413,8 +1429,8 @@ static void ath10k_bss_assoc(struct ieee80211_hw *hw,
 
 	ap_sta = ieee80211_find_sta(vif, bss_conf->bssid);
 	if (!ap_sta) {
-		ath10k_warn("Failed to find station entry for %pM\n",
-			    bss_conf->bssid);
+		ath10k_warn("Failed to find station entry for %pM, vdev %i\n",
+			    bss_conf->bssid, arvif->vdev_id);
 		rcu_read_unlock();
 		return;
 	}
@@ -1426,8 +1442,8 @@ static void ath10k_bss_assoc(struct ieee80211_hw *hw,
 	ret = ath10k_peer_assoc_prepare(ar, arvif, ap_sta,
 					bss_conf, &peer_arg);
 	if (ret) {
-		ath10k_warn("Peer assoc prepare failed for %pM\n: %d",
-			    bss_conf->bssid, ret);
+		ath10k_warn("Peer assoc prepare failed for %pM vdev %i\n: %d",
+			    bss_conf->bssid, arvif->vdev_id, ret);
 		rcu_read_unlock();
 		return;
 	}
@@ -1436,14 +1452,15 @@ static void ath10k_bss_assoc(struct ieee80211_hw *hw,
 
 	ret = ath10k_wmi_peer_assoc(ar, &peer_arg);
 	if (ret) {
-		ath10k_warn("Peer assoc failed for %pM\n: %d",
-			    bss_conf->bssid, ret);
+		ath10k_warn("Peer assoc failed for %pM vdev %i\n: %d",
+			    bss_conf->bssid, arvif->vdev_id, ret);
 		return;
 	}
 
 	ret = ath10k_setup_peer_smps(ar, arvif, bss_conf->bssid, &ht_cap);
 	if (ret) {
-		ath10k_warn("failed to setup peer SMPS: %d\n", ret);
+		ath10k_warn("failed to setup peer SMPS for vdev %i: %d\n",
+			    arvif->vdev_id, ret);
 		return;
 	}
 
@@ -1516,34 +1533,35 @@ static int ath10k_station_assoc(struct ath10k *ar, struct ath10k_vif *arvif,
 
 	ret = ath10k_peer_assoc_prepare(ar, arvif, sta, NULL, &peer_arg);
 	if (ret) {
-		ath10k_warn("WMI peer assoc prepare failed for %pM\n",
-			    sta->addr);
+		ath10k_warn("WMI peer assoc prepare failed for %pM vdev %i: %i\n",
+			    sta->addr, arvif->vdev_id, ret);
 		return ret;
 	}
 
 	ret = ath10k_wmi_peer_assoc(ar, &peer_arg);
 	if (ret) {
-		ath10k_warn("Peer assoc failed for STA %pM\n: %d",
-			    sta->addr, ret);
+		ath10k_warn("Peer assoc failed for STA %pM vdev %i: %d\n",
+			    sta->addr, arvif->vdev_id, ret);
 		return ret;
 	}
 
 	ret = ath10k_setup_peer_smps(ar, arvif, sta->addr, &sta->ht_cap);
 	if (ret) {
-		ath10k_warn("failed to setup peer SMPS: %d\n", ret);
+		ath10k_warn("failed to setup peer SMPS for vdev: %d\n", ret);
 		return ret;
 	}
 
 	ret = ath10k_install_peer_wep_keys(arvif, sta->addr);
 	if (ret) {
-		ath10k_warn("could not install peer wep keys (%d)\n", ret);
+		ath10k_warn("could not install peer wep keys for vdev %i: %d\n",
+			    arvif->vdev_id, ret);
 		return ret;
 	}
 
 	ret = ath10k_peer_assoc_qos_ap(ar, arvif, sta);
 	if (ret) {
-		ath10k_warn("could not set qos params for STA %pM, %d\n",
-			    sta->addr, ret);
+		ath10k_warn("could not set qos params for STA %pM for vdev %i: %d\n",
+			    sta->addr, arvif->vdev_id, ret);
 		return ret;
 	}
 
@@ -1559,7 +1577,8 @@ static int ath10k_station_disassoc(struct ath10k *ar, struct ath10k_vif *arvif,
 
 	ret = ath10k_clear_peer_keys(arvif, sta->addr);
 	if (ret) {
-		ath10k_warn("could not clear all peer wep keys (%d)\n", ret);
+		ath10k_warn("could not clear all peer wep keys for vdev %i: %d\n",
+			    arvif->vdev_id, ret);
 		return ret;
 	}
 
@@ -2526,7 +2545,8 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
 	ret = ath10k_wmi_vdev_create(ar, arvif->vdev_id, arvif->vdev_type,
 				     arvif->vdev_subtype, vif->addr);
 	if (ret) {
-		ath10k_warn("WMI vdev create failed: ret %d\n", ret);
+		ath10k_warn("WMI vdev %i create failed: ret %d\n",
+			    arvif->vdev_id, ret);
 		goto err;
 	}
 
@@ -2537,7 +2557,8 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
 	ret = ath10k_wmi_vdev_set_param(ar, 0, vdev_param,
 					arvif->def_wep_key_idx);
 	if (ret) {
-		ath10k_warn("Failed to set default keyid: %d\n", ret);
+		ath10k_warn("Failed to set vdev %i default keyid: %d\n",
+			    arvif->vdev_id, ret);
 		goto err_vdev_delete;
 	}
 
@@ -2546,21 +2567,23 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
 					ATH10K_HW_TXRX_NATIVE_WIFI);
 	/* 10.X firmware does not support this VDEV parameter. Do not warn */
 	if (ret && ret != -EOPNOTSUPP) {
-		ath10k_warn("Failed to set TX encap: %d\n", ret);
+		ath10k_warn("Failed to set vdev %i TX encap: %d\n",
+			    arvif->vdev_id, ret);
 		goto err_vdev_delete;
 	}
 
 	if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
 		ret = ath10k_peer_create(ar, arvif->vdev_id, vif->addr);
 		if (ret) {
-			ath10k_warn("Failed to create peer for AP: %d\n", ret);
+			ath10k_warn("Failed to create vdev %i peer for AP: %d\n",
+				    arvif->vdev_id, ret);
 			goto err_vdev_delete;
 		}
 
 		ret = ath10k_mac_set_kickout(arvif);
 		if (ret) {
-			ath10k_warn("Failed to set kickout parameters: %d\n",
-				    ret);
+			ath10k_warn("Failed to set vdev %i kickout parameters: %d\n",
+				    arvif->vdev_id, ret);
 			goto err_peer_delete;
 		}
 	}
@@ -2571,7 +2594,8 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
 		ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id,
 						  param, value);
 		if (ret) {
-			ath10k_warn("Failed to set RX wake policy: %d\n", ret);
+			ath10k_warn("Failed to set vdev %i RX wake policy: %d\n",
+				    arvif->vdev_id, ret);
 			goto err_peer_delete;
 		}
 
@@ -2580,7 +2604,8 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
 		ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id,
 						  param, value);
 		if (ret) {
-			ath10k_warn("Failed to set TX wake thresh: %d\n", ret);
+			ath10k_warn("Failed to set vdev %i TX wake thresh: %d\n",
+				    arvif->vdev_id, ret);
 			goto err_peer_delete;
 		}
 
@@ -2589,7 +2614,8 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
 		ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id,
 						  param, value);
 		if (ret) {
-			ath10k_warn("Failed to set PSPOLL count: %d\n", ret);
+			ath10k_warn("Failed to set vdev %i PSPOLL count: %d\n",
+				    arvif->vdev_id, ret);
 			goto err_peer_delete;
 		}
 	}
@@ -2653,17 +2679,19 @@ static void ath10k_remove_interface(struct ieee80211_hw *hw,
 	if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
 		ret = ath10k_peer_delete(arvif->ar, arvif->vdev_id, vif->addr);
 		if (ret)
-			ath10k_warn("Failed to remove peer for AP: %d\n", ret);
+			ath10k_warn("Failed to remove peer for AP vdev %i: %d\n",
+				    arvif->vdev_id, ret);
 
 		kfree(arvif->u.ap.noa_data);
 	}
 
-	ath10k_dbg(ATH10K_DBG_MAC, "mac vdev delete %d (remove interface)\n",
+	ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %i delete (remove interface)\n",
 		   arvif->vdev_id);
 
 	ret = ath10k_wmi_vdev_delete(ar, arvif->vdev_id);
 	if (ret)
-		ath10k_warn("WMI vdev delete failed: %d\n", ret);
+		ath10k_warn("WMI vdev %i delete failed: %d\n",
+			    arvif->vdev_id, ret);
 
 	if (arvif->vdev_type == WMI_VDEV_TYPE_MONITOR)
 		ar->monitor_present = false;
@@ -2752,8 +2780,8 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
 			   arvif->vdev_id, arvif->beacon_interval);
 
 		if (ret)
-			ath10k_warn("Failed to set beacon interval for VDEV: %d\n",
-				    arvif->vdev_id);
+			ath10k_warn("Failed to set beacon interval for vdev %d: %i\n",
+				    arvif->vdev_id, ret);
 	}
 
 	if (changed & BSS_CHANGED_BEACON) {
@@ -2765,8 +2793,8 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
 		ret = ath10k_wmi_pdev_set_param(ar, pdev_param,
 						WMI_BEACON_STAGGERED_MODE);
 		if (ret)
-			ath10k_warn("Failed to set beacon mode for VDEV: %d\n",
-				    arvif->vdev_id);
+			ath10k_warn("Failed to set beacon mode for vdev %d: %i\n",
+				    arvif->vdev_id, ret);
 	}
 
 	if (changed & BSS_CHANGED_BEACON_INFO) {
@@ -2780,8 +2808,8 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
 		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
 						arvif->dtim_period);
 		if (ret)
-			ath10k_warn("Failed to set dtim period for VDEV: %d\n",
-				    arvif->vdev_id);
+			ath10k_warn("Failed to set dtim period for vdev %d: %i\n",
+				    arvif->vdev_id, ret);
 	}
 
 	if (changed & BSS_CHANGED_SSID &&
@@ -2801,7 +2829,7 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
 			ret = ath10k_peer_create(ar, arvif->vdev_id,
 						 info->bssid);
 			if (ret)
-				ath10k_warn("Failed to add peer %pM for vdev %d when changin bssid: %i\n",
+				ath10k_warn("Failed to add peer %pM for vdev %d when changing bssid: %i\n",
 					    info->bssid, arvif->vdev_id, ret);
 
 			if (vif->type == NL80211_IFTYPE_STATION) {
@@ -2817,8 +2845,8 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
 
 				ret = ath10k_vdev_start(arvif);
 				if (ret) {
-					ath10k_warn("failed to start vdev: %d\n",
-						    ret);
+					ath10k_warn("failed to start vdev %i: %d\n",
+						    arvif->vdev_id, ret);
 					goto exit;
 				}
 
@@ -2853,8 +2881,8 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
 		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
 						cts_prot);
 		if (ret)
-			ath10k_warn("Failed to set CTS prot for VDEV: %d\n",
-				    arvif->vdev_id);
+			ath10k_warn("Failed to set CTS prot for vdev %d: %d\n",
+				    arvif->vdev_id, ret);
 	}
 
 	if (changed & BSS_CHANGED_ERP_SLOT) {
@@ -2872,8 +2900,8 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
 		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
 						slottime);
 		if (ret)
-			ath10k_warn("Failed to set erp slot for VDEV: %d\n",
-				    arvif->vdev_id);
+			ath10k_warn("Failed to set erp slot for vdev %d: %i\n",
+				    arvif->vdev_id, ret);
 	}
 
 	if (changed & BSS_CHANGED_ERP_PREAMBLE) {
@@ -2891,8 +2919,8 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
 		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
 						preamble);
 		if (ret)
-			ath10k_warn("Failed to set preamble for VDEV: %d\n",
-				    arvif->vdev_id);
+			ath10k_warn("Failed to set preamble for vdev %d: %i\n",
+				    arvif->vdev_id, ret);
 	}
 
 	if (changed & BSS_CHANGED_ASSOC) {
@@ -3023,8 +3051,8 @@ static void ath10k_set_key_h_def_keyidx(struct ath10k *ar,
 	ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
 					key->keyidx);
 	if (ret)
-		ath10k_warn("failed to set group key as default key: %d\n",
-			    ret);
+		ath10k_warn("failed to set vdev %i group key as default key: %d\n",
+			    arvif->vdev_id, ret);
 }
 
 static int ath10k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
@@ -3084,7 +3112,8 @@ static int ath10k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 
 	ret = ath10k_install_key(arvif, key, cmd, peer_addr);
 	if (ret) {
-		ath10k_warn("ath10k_install_key failed (%d)\n", ret);
+		ath10k_warn("key installation failed for vdev %i peer %pM: %d\n",
+			    arvif->vdev_id, peer_addr, ret);
 		goto exit;
 	}
 
@@ -3231,8 +3260,8 @@ static int ath10k_sta_state(struct ieee80211_hw *hw,
 			   arvif->vdev_id, sta->addr);
 		ret = ath10k_peer_delete(ar, arvif->vdev_id, sta->addr);
 		if (ret)
-			ath10k_warn("Failed to delete peer: %pM for VDEV: %d\n",
-				    sta->addr, arvif->vdev_id);
+			ath10k_warn("Failed to delete peer %pM for vdev %d: %i\n",
+				    sta->addr, arvif->vdev_id, ret);
 
 		if (vif->type == NL80211_IFTYPE_STATION)
 			ath10k_bss_disassoc(hw, vif);
@@ -3248,8 +3277,8 @@ static int ath10k_sta_state(struct ieee80211_hw *hw,
 
 		ret = ath10k_station_assoc(ar, arvif, sta);
 		if (ret)
-			ath10k_warn("Failed to associate station: %pM\n",
-				    sta->addr);
+			ath10k_warn("Failed to associate station %pM for vdev %i: %i\n",
+				    sta->addr, arvif->vdev_id, ret);
 	} else if (old_state == IEEE80211_STA_ASSOC &&
 		   new_state == IEEE80211_STA_AUTH &&
 		   (vif->type == NL80211_IFTYPE_AP ||
@@ -3262,8 +3291,8 @@ static int ath10k_sta_state(struct ieee80211_hw *hw,
 
 		ret = ath10k_station_disassoc(ar, arvif, sta);
 		if (ret)
-			ath10k_warn("Failed to disassociate station: %pM\n",
-				    sta->addr);
+			ath10k_warn("Failed to disassociate station: %pM vdev %i ret %i\n",
+				    sta->addr, arvif->vdev_id, ret);
 	}
 exit:
 	mutex_unlock(&ar->conf_mutex);
@@ -4407,7 +4436,7 @@ struct ath10k_vif *ath10k_get_arvif(struct ath10k *ar, u32 vdev_id)
 						   ath10k_get_arvif_iter,
 						   &arvif_iter);
 	if (!arvif_iter.arvif) {
-		ath10k_warn("No VIF found for VDEV: %d\n", vdev_id);
+		ath10k_warn("No VIF found for vdev %d\n", vdev_id);
 		return NULL;
 	}
 
@@ -4547,7 +4576,7 @@ int ath10k_mac_register(struct ath10k *ar)
 	ret = ath_regd_init(&ar->ath_common.regulatory, ar->hw->wiphy,
 			    ath10k_reg_notifier);
 	if (ret) {
-		ath10k_err("Regulatory initialization failed\n");
+		ath10k_err("Regulatory initialization failed: %i\n", ret);
 		goto err_free;
 	}
 
-- 
cgit v1.2.2


From c8e4955653a470ece7bf580c84fc88eb58cc9850 Mon Sep 17 00:00:00 2001
From: Silvan Jegen <s.jegen@gmail.com>
Date: Tue, 25 Feb 2014 18:12:52 +0100
Subject: net: Replace min macro with min_t

Instead of an explicit cast, use the min_t macro.

Signed-off-by: Silvan Jegen <s.jegen@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/main.c           | 2 +-
 drivers/net/wireless/b43/sysfs.c          | 2 +-
 drivers/net/wireless/b43/xmit.c           | 2 +-
 drivers/net/wireless/b43legacy/main.c     | 4 ++--
 drivers/net/wireless/b43legacy/sysfs.c    | 2 +-
 drivers/net/wireless/b43legacy/xmit.c     | 2 +-
 drivers/net/wireless/cw1200/fwio.c        | 4 ++--
 drivers/net/wireless/ipw2x00/ipw2100.c    | 2 +-
 drivers/net/wireless/ipw2x00/ipw2200.c    | 2 +-
 drivers/net/wireless/libertas/if_sdio.c   | 4 ++--
 drivers/net/wireless/mwifiex/debugfs.c    | 4 ++--
 drivers/net/wireless/p54/p54usb.c         | 2 +-
 drivers/net/wireless/prism54/isl_ioctl.c  | 2 +-
 drivers/net/wireless/rt2x00/rt2x00debug.c | 2 +-
 drivers/net/wireless/ti/wlcore/main.c     | 2 +-
 drivers/net/wireless/ti/wlcore/spi.c      | 4 ++--
 drivers/net/wireless/ti/wlcore/sysfs.c    | 2 +-
 17 files changed, 22 insertions(+), 22 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index c75237eb55a1..69fc3d65531a 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -1549,7 +1549,7 @@ static void b43_write_beacon_template(struct b43_wldev *dev,
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(dev->wl->current_beacon);
 
 	bcn = (const struct ieee80211_mgmt *)(dev->wl->current_beacon->data);
-	len = min((size_t) dev->wl->current_beacon->len,
+	len = min_t(size_t, dev->wl->current_beacon->len,
 		  0x200 - sizeof(struct b43_plcp_hdr6));
 	rate = ieee80211_get_tx_rate(dev->wl->hw, info)->hw_value;
 
diff --git a/drivers/net/wireless/b43/sysfs.c b/drivers/net/wireless/b43/sysfs.c
index 8e8431d4eb0c..3190493bd07f 100644
--- a/drivers/net/wireless/b43/sysfs.c
+++ b/drivers/net/wireless/b43/sysfs.c
@@ -40,7 +40,7 @@ static int get_integer(const char *buf, size_t count)
 
 	if (count == 0)
 		goto out;
-	count = min(count, (size_t) 10);
+	count = min_t(size_t, count, 10);
 	memcpy(tmp, buf, count);
 	ret = simple_strtol(tmp, NULL, 10);
       out:
diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c
index 218a0f37af46..31adb8cf0291 100644
--- a/drivers/net/wireless/b43/xmit.c
+++ b/drivers/net/wireless/b43/xmit.c
@@ -337,7 +337,7 @@ int b43_generate_txhdr(struct b43_wldev *dev,
 			/* iv16 */
 			memcpy(txhdr->iv + 10, ((u8 *) wlhdr) + wlhdr_len, 3);
 		} else {
-			iv_len = min((size_t) info->control.hw_key->iv_len,
+			iv_len = min_t(size_t, info->control.hw_key->iv_len,
 				     ARRAY_SIZE(txhdr->iv));
 			memcpy(txhdr->iv, ((u8 *) wlhdr) + wlhdr_len, iv_len);
 		}
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index 349c77605231..1aec2146a2bf 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -978,7 +978,7 @@ static void b43legacy_write_beacon_template(struct b43legacy_wldev *dev,
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(dev->wl->current_beacon);
 
 	bcn = (const struct ieee80211_mgmt *)(dev->wl->current_beacon->data);
-	len = min((size_t)dev->wl->current_beacon->len,
+	len = min_t(size_t, dev->wl->current_beacon->len,
 		  0x200 - sizeof(struct b43legacy_plcp_hdr6));
 	rate = ieee80211_get_tx_rate(dev->wl->hw, info)->hw_value;
 
@@ -1155,7 +1155,7 @@ static void b43legacy_write_probe_resp_template(struct b43legacy_wldev *dev,
 	b43legacy_write_probe_resp_plcp(dev, 0x350, size,
 					&b43legacy_b_ratetable[3]);
 
-	size = min((size_t)size,
+	size = min_t(size_t, size,
 		   0x200 - sizeof(struct b43legacy_plcp_hdr6));
 	b43legacy_write_template_common(dev, probe_resp_data,
 					size, ram_offset,
diff --git a/drivers/net/wireless/b43legacy/sysfs.c b/drivers/net/wireless/b43legacy/sysfs.c
index 57f8b089767c..2a1da15c913b 100644
--- a/drivers/net/wireless/b43legacy/sysfs.c
+++ b/drivers/net/wireless/b43legacy/sysfs.c
@@ -42,7 +42,7 @@ static int get_integer(const char *buf, size_t count)
 
 	if (count == 0)
 		goto out;
-	count = min(count, (size_t)10);
+	count = min_t(size_t, count, 10);
 	memcpy(tmp, buf, count);
 	ret = simple_strtol(tmp, NULL, 10);
 out:
diff --git a/drivers/net/wireless/b43legacy/xmit.c b/drivers/net/wireless/b43legacy/xmit.c
index 86588c9ff0f2..34bf3f0b729f 100644
--- a/drivers/net/wireless/b43legacy/xmit.c
+++ b/drivers/net/wireless/b43legacy/xmit.c
@@ -254,7 +254,7 @@ static int generate_txhdr_fw3(struct b43legacy_wldev *dev,
 				   B43legacy_TX4_MAC_KEYALG_SHIFT) &
 				   B43legacy_TX4_MAC_KEYALG;
 			wlhdr_len = ieee80211_hdrlen(wlhdr->frame_control);
-			iv_len = min((size_t)info->control.hw_key->iv_len,
+			iv_len = min_t(size_t, info->control.hw_key->iv_len,
 				     ARRAY_SIZE(txhdr->iv));
 			memcpy(txhdr->iv, ((u8 *)wlhdr) + wlhdr_len, iv_len);
 		} else {
diff --git a/drivers/net/wireless/cw1200/fwio.c b/drivers/net/wireless/cw1200/fwio.c
index 5a9ffd3a6a6c..e23d67e0bfe6 100644
--- a/drivers/net/wireless/cw1200/fwio.c
+++ b/drivers/net/wireless/cw1200/fwio.c
@@ -202,8 +202,8 @@ static int cw1200_load_firmware_cw1200(struct cw1200_common *priv)
 		}
 
 		/* calculate the block size */
-		tx_size = block_size = min((size_t)(firmware->size - put),
-			(size_t)DOWNLOAD_BLOCK_SIZE);
+		tx_size = block_size = min_t(size_t, firmware->size - put,
+					DOWNLOAD_BLOCK_SIZE);
 
 		memcpy(buf, &firmware->data[put], block_size);
 		if (block_size < DOWNLOAD_BLOCK_SIZE) {
diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c
index 3aba49259ef1..dfc6dfc56d52 100644
--- a/drivers/net/wireless/ipw2x00/ipw2100.c
+++ b/drivers/net/wireless/ipw2x00/ipw2100.c
@@ -7065,7 +7065,7 @@ static int ipw2100_wx_set_nick(struct net_device *dev,
 	if (wrqu->data.length > IW_ESSID_MAX_SIZE)
 		return -E2BIG;
 
-	wrqu->data.length = min((size_t) wrqu->data.length, sizeof(priv->nick));
+	wrqu->data.length = min_t(size_t, wrqu->data.length, sizeof(priv->nick));
 	memset(priv->nick, 0, sizeof(priv->nick));
 	memcpy(priv->nick, extra, wrqu->data.length);
 
diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c
index 139326065bd9..c5aa404069f3 100644
--- a/drivers/net/wireless/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/ipw2x00/ipw2200.c
@@ -9169,7 +9169,7 @@ static int ipw_wx_set_nick(struct net_device *dev,
 	if (wrqu->data.length > IW_ESSID_MAX_SIZE)
 		return -E2BIG;
 	mutex_lock(&priv->mutex);
-	wrqu->data.length = min((size_t) wrqu->data.length, sizeof(priv->nick));
+	wrqu->data.length = min_t(size_t, wrqu->data.length, sizeof(priv->nick));
 	memset(priv->nick, 0, sizeof(priv->nick));
 	memcpy(priv->nick, extra, wrqu->data.length);
 	IPW_DEBUG_TRACE("<<\n");
diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c
index 58c6ee5de98f..33ceda296c9c 100644
--- a/drivers/net/wireless/libertas/if_sdio.c
+++ b/drivers/net/wireless/libertas/if_sdio.c
@@ -498,7 +498,7 @@ static int if_sdio_prog_helper(struct if_sdio_card *card,
 		 */
 		mdelay(2);
 
-		chunk_size = min(size, (size_t)60);
+		chunk_size = min_t(size_t, size, 60);
 
 		*((__le32*)chunk_buffer) = cpu_to_le32(chunk_size);
 		memcpy(chunk_buffer + 4, firmware, chunk_size);
@@ -639,7 +639,7 @@ static int if_sdio_prog_real(struct if_sdio_card *card,
 			req_size = size;
 
 		while (req_size) {
-			chunk_size = min(req_size, (size_t)512);
+			chunk_size = min_t(size_t, req_size, 512);
 
 			memcpy(chunk_buffer, firmware, chunk_size);
 /*
diff --git a/drivers/net/wireless/mwifiex/debugfs.c b/drivers/net/wireless/mwifiex/debugfs.c
index 61b467a7ebdd..b8a49aad12fd 100644
--- a/drivers/net/wireless/mwifiex/debugfs.c
+++ b/drivers/net/wireless/mwifiex/debugfs.c
@@ -493,7 +493,7 @@ mwifiex_regrdwr_write(struct file *file,
 {
 	unsigned long addr = get_zeroed_page(GFP_KERNEL);
 	char *buf = (char *) addr;
-	size_t buf_size = min(count, (size_t) (PAGE_SIZE - 1));
+	size_t buf_size = min_t(size_t, count, PAGE_SIZE - 1);
 	int ret;
 	u32 reg_type = 0, reg_offset = 0, reg_value = UINT_MAX;
 
@@ -594,7 +594,7 @@ mwifiex_rdeeprom_write(struct file *file,
 {
 	unsigned long addr = get_zeroed_page(GFP_KERNEL);
 	char *buf = (char *) addr;
-	size_t buf_size = min(count, (size_t) (PAGE_SIZE - 1));
+	size_t buf_size = min_t(size_t, count, PAGE_SIZE - 1);
 	int ret = 0;
 	int offset = -1, bytes = -1;
 
diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c
index 6e635cfa24c8..b7ab3dfb3de8 100644
--- a/drivers/net/wireless/p54/p54usb.c
+++ b/drivers/net/wireless/p54/p54usb.c
@@ -513,7 +513,7 @@ static int p54u_upload_firmware_3887(struct ieee80211_hw *dev)
 	if (!buf)
 		return -ENOMEM;
 
-	left = block_size = min((size_t)P54U_FW_BLOCK, priv->fw->size);
+	left = block_size = min_t(size_t, P54U_FW_BLOCK, priv->fw->size);
 	strcpy(buf, p54u_firmware_upload_3887);
 	left -= strlen(p54u_firmware_upload_3887);
 	tmp += strlen(p54u_firmware_upload_3887);
diff --git a/drivers/net/wireless/prism54/isl_ioctl.c b/drivers/net/wireless/prism54/isl_ioctl.c
index 78fa64d3f223..ecbb0546cf3e 100644
--- a/drivers/net/wireless/prism54/isl_ioctl.c
+++ b/drivers/net/wireless/prism54/isl_ioctl.c
@@ -644,7 +644,7 @@ prism54_translate_bss(struct net_device *ndev, struct iw_request_info *info,
 	wpa_ie_len = prism54_wpa_bss_ie_get(priv, bss->address, wpa_ie);
 	if (wpa_ie_len > 0) {
 		iwe.cmd = IWEVGENIE;
-		iwe.u.data.length = min(wpa_ie_len, (size_t)MAX_WPA_IE_LEN);
+		iwe.u.data.length = min_t(size_t, wpa_ie_len, MAX_WPA_IE_LEN);
 		current_ev = iwe_stream_add_point(info, current_ev, end_buf,
 						  &iwe, wpa_ie);
 	}
diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.c b/drivers/net/wireless/rt2x00/rt2x00debug.c
index 2e3d1645e68b..90fdb02b55e7 100644
--- a/drivers/net/wireless/rt2x00/rt2x00debug.c
+++ b/drivers/net/wireless/rt2x00/rt2x00debug.c
@@ -286,7 +286,7 @@ static ssize_t rt2x00debug_read_queue_dump(struct file *file,
 	if (retval)
 		return retval;
 
-	status = min((size_t)skb->len, length);
+	status = min_t(size_t, skb->len, length);
 	if (copy_to_user(buf, skb->data, status)) {
 		status = -EFAULT;
 		goto exit;
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 4175a57ac9f5..ed88d3913483 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -800,7 +800,7 @@ size_t wl12xx_copy_fwlog(struct wl1271 *wl, u8 *memblock, size_t maxlen)
 	size_t len;
 
 	/* Make sure we have enough room */
-	len = min(maxlen, (size_t)(PAGE_SIZE - wl->fwlog_size));
+	len = min_t(size_t, maxlen, PAGE_SIZE - wl->fwlog_size);
 
 	/* Fill the FW log file, consumed by the sysfs fwlog entry */
 	memcpy(wl->fwlog + wl->fwlog_size, memblock, len);
diff --git a/drivers/net/wireless/ti/wlcore/spi.c b/drivers/net/wireless/ti/wlcore/spi.c
index b2c018dccf18..dbe826dd7c23 100644
--- a/drivers/net/wireless/ti/wlcore/spi.c
+++ b/drivers/net/wireless/ti/wlcore/spi.c
@@ -211,7 +211,7 @@ static int __must_check wl12xx_spi_raw_read(struct device *child, int addr,
 	u32 chunk_len;
 
 	while (len > 0) {
-		chunk_len = min((size_t)WSPI_MAX_CHUNK_SIZE, len);
+		chunk_len = min_t(size_t, WSPI_MAX_CHUNK_SIZE, len);
 
 		cmd = &wl->buffer_cmd;
 		busy_buf = wl->buffer_busyword;
@@ -285,7 +285,7 @@ static int __must_check wl12xx_spi_raw_write(struct device *child, int addr,
 	cmd = &commands[0];
 	i = 0;
 	while (len > 0) {
-		chunk_len = min((size_t)WSPI_MAX_CHUNK_SIZE, len);
+		chunk_len = min_t(size_t, WSPI_MAX_CHUNK_SIZE, len);
 
 		*cmd = 0;
 		*cmd |= WSPI_CMD_WRITE;
diff --git a/drivers/net/wireless/ti/wlcore/sysfs.c b/drivers/net/wireless/ti/wlcore/sysfs.c
index 8e583497940d..24dd288d6809 100644
--- a/drivers/net/wireless/ti/wlcore/sysfs.c
+++ b/drivers/net/wireless/ti/wlcore/sysfs.c
@@ -152,7 +152,7 @@ static ssize_t wl1271_sysfs_read_fwlog(struct file *filp, struct kobject *kobj,
 	}
 
 	/* Seeking is not supported - old logs are not kept. Disregard pos. */
-	len = min(count, (size_t)wl->fwlog_size);
+	len = min_t(size_t, count, wl->fwlog_size);
 	wl->fwlog_size -= len;
 	memcpy(buffer, wl->fwlog, len);
 
-- 
cgit v1.2.2


From 727b662c2b3476840b7fef7a44685fb0a0898c48 Mon Sep 17 00:00:00 2001
From: Sylvain Roger Rieunier <sylvain.roger.rieunier@gmail.com>
Date: Thu, 27 Feb 2014 14:36:06 +0100
Subject: ath9k: fix invalid max frame length

According to 802.11n-2012 standard in paragraph PPDU Fromat(20.3.2) HT-mixed
format  Hearder PPDU contains : L_STF, L_LTF, L_SIG, HT_SIG, HT_STF, HT_LTF
they are symbols in the preamble, there are in time unit(us) that's for why
it can't be computed in bytes

Signed-off-by: Sylvain ROGER RIEUNIER <sylvain.roger.rieunier@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/xmit.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 8f28711cfd4e..306ea322c65d 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -1040,11 +1040,11 @@ static int ath_max_framelen(int usec, int mcs, bool ht40, bool sgi)
 	int symbols, bits;
 	int bytes = 0;
 
+	usec -= L_STF + L_LTF + L_SIG + HT_SIG + HT_STF + HT_LTF(streams);
 	symbols = sgi ? TIME_SYMBOLS_HALFGI(usec) : TIME_SYMBOLS(usec);
 	bits = symbols * bits_per_symbol[mcs % 8][ht40] * streams;
 	bits -= OFDM_PLCP_BITS;
 	bytes = bits / 8;
-	bytes -= L_STF + L_LTF + L_SIG + HT_SIG + HT_STF + HT_LTF(streams);
 	if (bytes > 65532)
 		bytes = 65532;
 
-- 
cgit v1.2.2


From 6241226f68ea5285674adeb846a1a4544470724e Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Fri, 28 Feb 2014 19:02:24 +0100
Subject: ath9k_hw: toggle weak signal detection in AP mode on older chipsets

The commit 80b4205b "ath9k: Fix OFDM weak signal detection for AP mode"
prevented weak signal detection changes from taking effect in AP mode on
all chipsets, claiming it is "not allowed".

The main reason for not disabling weak signal detection in AP mode is
that typically beacon RSSI is used to track whether it is needed to
boost range, and this is unavailable in AP mode for obvious reasons.

The problem with not disabling weak signal detection is that older
chipsets are very sensitive to high PHY error counts. When faced with
heavy noise, this can lead to an excessive amount of "Failed to stop
TX DMA" errors in the field.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ani.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c
index d28923b7435b..3227ee059813 100644
--- a/drivers/net/wireless/ath/ath9k/ani.c
+++ b/drivers/net/wireless/ath/ath9k/ani.c
@@ -176,16 +176,18 @@ static void ath9k_hw_set_ofdm_nil(struct ath_hw *ah, u8 immunityLevel,
 	if (ah->opmode == NL80211_IFTYPE_STATION &&
 	    BEACON_RSSI(ah) <= ATH9K_ANI_RSSI_THR_HIGH)
 		weak_sig = true;
-
 	/*
-	 * OFDM Weak signal detection is always enabled for AP mode.
+	 * Newer chipsets are better at dealing with high PHY error counts -
+	 * keep weak signal detection enabled when no RSSI threshold is
+	 * available to determine if it is needed (mode != STA)
 	 */
-	if (ah->opmode != NL80211_IFTYPE_AP &&
-	    aniState->ofdmWeakSigDetect != weak_sig) {
-		ath9k_hw_ani_control(ah,
-				     ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION,
-				     entry_ofdm->ofdm_weak_signal_on);
-	}
+	else if (AR_SREV_9300_20_OR_LATER(ah) &&
+		 ah->opmode != NL80211_IFTYPE_STATION)
+		weak_sig = true;
+
+	if (aniState->ofdmWeakSigDetect != weak_sig)
+		ath9k_hw_ani_control(ah, ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION,
+				     weak_sig);
 
 	if (aniState->ofdmNoiseImmunityLevel >= ATH9K_ANI_OFDM_DEF_LEVEL) {
 		ah->config.ofdm_trig_high = ATH9K_ANI_OFDM_TRIG_HIGH;
-- 
cgit v1.2.2


From f5547245217ed54bbb2a72c109c6756323bdb98f Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Fri, 28 Feb 2014 19:02:25 +0100
Subject: ath9k_hw: tweak noise immunity thresholds for older chipsets

Older chipsets are more sensitive to high PHY error counts, and the
current noise immunity thresholds were based on tests run at QCA with
newer chipsets.

This patch brings back the values from the old ANI implementation for
old chipsets, and it also disables weak signal detection on an earlier
noise immunity level, to improve overall radio stability on affected
devices.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ani.c | 23 +++++++++++++++++++----
 drivers/net/wireless/ath/ath9k/ani.h |  4 ++++
 2 files changed, 23 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c
index 3227ee059813..2ce5079007b6 100644
--- a/drivers/net/wireless/ath/ath9k/ani.c
+++ b/drivers/net/wireless/ath/ath9k/ani.c
@@ -185,10 +185,18 @@ static void ath9k_hw_set_ofdm_nil(struct ath_hw *ah, u8 immunityLevel,
 		 ah->opmode != NL80211_IFTYPE_STATION)
 		weak_sig = true;
 
+	/* Older chipsets are more sensitive to high PHY error counts */
+	else if (!AR_SREV_9300_20_OR_LATER(ah) &&
+		 aniState->ofdmNoiseImmunityLevel >= 8)
+		weak_sig = false;
+
 	if (aniState->ofdmWeakSigDetect != weak_sig)
 		ath9k_hw_ani_control(ah, ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION,
 				     weak_sig);
 
+	if (!AR_SREV_9300_20_OR_LATER(ah))
+		return;
+
 	if (aniState->ofdmNoiseImmunityLevel >= ATH9K_ANI_OFDM_DEF_LEVEL) {
 		ah->config.ofdm_trig_high = ATH9K_ANI_OFDM_TRIG_HIGH;
 		ah->config.ofdm_trig_low = ATH9K_ANI_OFDM_TRIG_LOW_ABOVE_INI;
@@ -485,10 +493,17 @@ void ath9k_hw_ani_init(struct ath_hw *ah)
 
 	ath_dbg(common, ANI, "Initialize ANI\n");
 
-	ah->config.ofdm_trig_high = ATH9K_ANI_OFDM_TRIG_HIGH;
-	ah->config.ofdm_trig_low = ATH9K_ANI_OFDM_TRIG_LOW;
-	ah->config.cck_trig_high = ATH9K_ANI_CCK_TRIG_HIGH;
-	ah->config.cck_trig_low = ATH9K_ANI_CCK_TRIG_LOW;
+	if (AR_SREV_9300_20_OR_LATER(ah)) {
+		ah->config.ofdm_trig_high = ATH9K_ANI_OFDM_TRIG_HIGH;
+		ah->config.ofdm_trig_low = ATH9K_ANI_OFDM_TRIG_LOW;
+		ah->config.cck_trig_high = ATH9K_ANI_CCK_TRIG_HIGH;
+		ah->config.cck_trig_low = ATH9K_ANI_CCK_TRIG_LOW;
+	} else {
+		ah->config.ofdm_trig_high = ATH9K_ANI_OFDM_TRIG_HIGH_OLD;
+		ah->config.ofdm_trig_low = ATH9K_ANI_OFDM_TRIG_LOW_OLD;
+		ah->config.cck_trig_high = ATH9K_ANI_CCK_TRIG_HIGH_OLD;
+		ah->config.cck_trig_low = ATH9K_ANI_CCK_TRIG_LOW_OLD;
+	}
 
 	ani->spurImmunityLevel = ATH9K_ANI_SPUR_IMMUNE_LVL;
 	ani->firstepLevel = ATH9K_ANI_FIRSTEP_LVL;
diff --git a/drivers/net/wireless/ath/ath9k/ani.h b/drivers/net/wireless/ath/ath9k/ani.h
index 21e7b83c3f6a..c40965b4c1e2 100644
--- a/drivers/net/wireless/ath/ath9k/ani.h
+++ b/drivers/net/wireless/ath/ath9k/ani.h
@@ -22,12 +22,16 @@
 /* units are errors per second */
 #define ATH9K_ANI_OFDM_TRIG_HIGH           3500
 #define ATH9K_ANI_OFDM_TRIG_HIGH_BELOW_INI 1000
+#define ATH9K_ANI_OFDM_TRIG_HIGH_OLD       500
 
 #define ATH9K_ANI_OFDM_TRIG_LOW           400
 #define ATH9K_ANI_OFDM_TRIG_LOW_ABOVE_INI 900
+#define ATH9K_ANI_OFDM_TRIG_LOW_OLD       200
 
 #define ATH9K_ANI_CCK_TRIG_HIGH           600
+#define ATH9K_ANI_CCK_TRIG_HIGH_OLD       200
 #define ATH9K_ANI_CCK_TRIG_LOW            300
+#define ATH9K_ANI_CCK_TRIG_LOW_OLD        100
 
 #define ATH9K_ANI_SPUR_IMMUNE_LVL         3
 #define ATH9K_ANI_FIRSTEP_LVL             2
-- 
cgit v1.2.2


From 4c59ff221e070eda4ff014b866a4797c6c18abbb Mon Sep 17 00:00:00 2001
From: "Zhao, Gang" <gamerh2o@gmail.com>
Date: Sat, 1 Mar 2014 14:26:29 +0800
Subject: wireless: Kconfig: add missing dependency

Previous driver changes to airo, atmel, wl3501_cs, and usb_zd1201 need
to include <net/cfg80211.h>, which depends on CFG80211, so add the
missing dependency.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Zhao, Gang <gamerh2o@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/Kconfig | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 200020eb3005..d1fab435f5a3 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -53,7 +53,7 @@ config LIBERTAS_THINFIRM_USB
 
 config AIRO
 	tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
-	depends on ISA_DMA_API && (PCI || BROKEN)
+	depends on CFG80211 && ISA_DMA_API && (PCI || BROKEN)
 	select WIRELESS_EXT
 	select CRYPTO
 	select WEXT_SPY
@@ -73,7 +73,7 @@ config AIRO
 
 config ATMEL
       tristate "Atmel at76c50x chipset  802.11b support"
-      depends on (PCI || PCMCIA)
+      depends on CFG80211 && (PCI || PCMCIA)
       select WIRELESS_EXT
       select WEXT_PRIV
       select FW_LOADER
@@ -138,7 +138,7 @@ config AIRO_CS
 
 config PCMCIA_WL3501
 	tristate "Planet WL3501 PCMCIA cards"
-	depends on PCMCIA
+	depends on CFG80211 && PCMCIA
 	select WIRELESS_EXT
 	select WEXT_SPY
 	help
@@ -168,7 +168,7 @@ config PRISM54
 
 config USB_ZD1201
 	tristate "USB ZD1201 based Wireless device support"
-	depends on USB
+	depends on CFG80211 && USB
 	select WIRELESS_EXT
 	select WEXT_PRIV
 	select FW_LOADER
-- 
cgit v1.2.2


From 7661e97542d57d54317407ff4790e2d6d94a0852 Mon Sep 17 00:00:00 2001
From: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Date: Sat, 1 Mar 2014 14:52:06 +0200
Subject: wl1251: use skb_trim to make skb shorter

the current code is directly setting skb->len, which is not correct and
brings problems with HAVE_EFFICIENT_UNALIGNED_ACCESS enabled in config

Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ti/wl1251/rx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ti/wl1251/rx.c b/drivers/net/wireless/ti/wl1251/rx.c
index 123c4bb50e0a..cde0eaf99714 100644
--- a/drivers/net/wireless/ti/wl1251/rx.c
+++ b/drivers/net/wireless/ti/wl1251/rx.c
@@ -180,7 +180,7 @@ static void wl1251_rx_body(struct wl1251 *wl,
 	wl1251_mem_read(wl, rx_packet_ring_addr, rx_buffer, length);
 
 	/* The actual length doesn't include the target's alignment */
-	skb->len = desc->length  - PLCP_HEADER_LENGTH;
+	skb_trim(skb, desc->length - PLCP_HEADER_LENGTH);
 
 	fc = (u16 *)skb->data;
 
-- 
cgit v1.2.2


From af31cb5a57084146aae5c01df6b85f54067528aa Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Sun, 2 Mar 2014 11:20:50 +0200
Subject: wil6210: fix buffer overflow in wil_txdesc_debugfs_show()

Wrong index comparison logic, found by smatch:

drivers/net/wireless/ath/wil6210/debugfs.c:402 wil_txdesc_debugfs_show() warn: buffer overflow 'wil->vring_tx' 24 <= 24

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wil6210/debugfs.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/wil6210/debugfs.c b/drivers/net/wireless/ath/wil6210/debugfs.c
index 729e774ee96d..1d09a4b0a0f4 100644
--- a/drivers/net/wireless/ath/wil6210/debugfs.c
+++ b/drivers/net/wireless/ath/wil6210/debugfs.c
@@ -26,8 +26,7 @@
 /* Nasty hack. Better have per device instances */
 static u32 mem_addr;
 static u32 dbg_txdesc_index;
-static u32 dbg_vring_index; /* 25 for Rx, 0..24 for Tx */
-#define WIL_DBG_VRING_INDEX_RX (WIL6210_MAX_TX_RINGS + 1)
+static u32 dbg_vring_index; /* 24+ for Rx, 0..23 for Tx */
 
 static void wil_print_vring(struct seq_file *s, struct wil6210_priv *wil,
 			    const char *name, struct vring *vring,
@@ -404,13 +403,14 @@ static int wil_txdesc_debugfs_show(struct seq_file *s, void *data)
 {
 	struct wil6210_priv *wil = s->private;
 	struct vring *vring;
-	if (dbg_vring_index <= WIL6210_MAX_TX_RINGS)
+	bool tx = (dbg_vring_index < WIL6210_MAX_TX_RINGS);
+	if (tx)
 		vring = &(wil->vring_tx[dbg_vring_index]);
 	else
 		vring = &wil->vring_rx;
 
 	if (!vring->va) {
-		if (dbg_vring_index <= WIL6210_MAX_TX_RINGS)
+		if (tx)
 			seq_printf(s, "No Tx[%2d] VRING\n", dbg_vring_index);
 		else
 			seq_puts(s, "No Rx VRING\n");
@@ -426,7 +426,7 @@ static int wil_txdesc_debugfs_show(struct seq_file *s, void *data)
 		volatile u32 *u = (volatile u32 *)d;
 		struct sk_buff *skb = vring->ctx[dbg_txdesc_index].skb;
 
-		if (dbg_vring_index <= WIL6210_MAX_TX_RINGS)
+		if (tx)
 			seq_printf(s, "Tx[%2d][%3d] = {\n", dbg_vring_index,
 				   dbg_txdesc_index);
 		else
@@ -461,7 +461,7 @@ static int wil_txdesc_debugfs_show(struct seq_file *s, void *data)
 		}
 		seq_printf(s, "}\n");
 	} else {
-		if (dbg_vring_index <= WIL6210_MAX_TX_RINGS)
+		if (tx)
 			seq_printf(s, "[%2d] TxDesc index (%d) >= size (%d)\n",
 				   dbg_vring_index, dbg_txdesc_index,
 				   vring->size);
-- 
cgit v1.2.2


From c14c5d99a453af6b86f15aca8fe9005b2b8f3b26 Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Sun, 2 Mar 2014 11:20:51 +0200
Subject: wil6210: fix smatch warning in wil_cfg80211_get_station()

Smatch suggests to propagate error code from wil_find_cid(), and, indeed,
it is a good idea.

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wil6210/cfg80211.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index a4da064dbbc4..743930357061 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -181,7 +181,7 @@ static int wil_cfg80211_get_station(struct wiphy *wiphy,
 
 	wil_info(wil, "%s(%pM) CID %d\n", __func__, mac, cid);
 	if (cid < 0)
-		return -ENOENT;
+		return cid;
 
 	rc = wil_cid_fill_sinfo(wil, cid, sinfo);
 
-- 
cgit v1.2.2


From 677676cd584033a47974c3634c6c9235e14db1a4 Mon Sep 17 00:00:00 2001
From: Jean Sacren <sakiwit@gmail.com>
Date: Sat, 1 Mar 2014 15:54:36 -0700
Subject: ieee802154: fix at86rf212_set_txpower() exit path

The commit 9b2777d6089bc ("ieee802154: add TX power control to
wpan_phy") introduced the new function at86rf212_set_txpower() with
the questionable check of the return of __at86rf230_write() in the
exit path:

1) Both at86rf212_set_txpower() and __at86rf230_write() have the
   same return type.

2) Whatever __at86rf230_write() returns becomes the return value of
   at86rf212_set_txpower().

Thus, fix the exit path by getting rid of that check entirely.

Signed-off-by: Jean Sacren <sakiwit@gmail.com>
Cc: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ieee802154/at86rf230.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index dd9ef5e1c730..03e24c560b2e 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -786,7 +786,6 @@ static int
 at86rf212_set_txpower(struct ieee802154_dev *dev, int db)
 {
 	struct at86rf230_local *lp = dev->priv;
-	int rc;
 
 	/* typical maximum output is 5dBm with RG_PHY_TX_PWR 0x60, lower five
 	 * bits decrease power in 1dB steps. 0x60 represents extra PA gain of
@@ -799,11 +798,7 @@ at86rf212_set_txpower(struct ieee802154_dev *dev, int db)
 
 	db = -(db - 5);
 
-	rc = __at86rf230_write(lp, RG_PHY_TX_PWR, 0x60 | db);
-	if (rc)
-		return rc;
-
-	return 0;
+	return __at86rf230_write(lp, RG_PHY_TX_PWR, 0x60 | db);
 }
 
 static int
-- 
cgit v1.2.2


From 4c552a5be78bd66abd59441a21fec348ee376b49 Mon Sep 17 00:00:00 2001
From: andrea merello <andrea.merello@gmail.com>
Date: Tue, 18 Feb 2014 02:10:45 +0100
Subject: rtl818x: Make sure the TX descriptor "valid" flag is written by last

The TX descriptors are consumed by the HW using DMA.
Even if in the driver code the memory write that sets the "valid"
flag appears after all other writes, the CPU may reorder writes,
causing the HW to consider as valid a not-fully-written yet
descriptor.

This may cause HW incorrect behaviour.

This can happen because (AFAIK) the HW may attempt DMA
asynchronously without waiting to be kicked by the following
register write.

This patch adds a write memory barrier to enforce writes ordering.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl8180/dev.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c
index 1f2462e92528..45d2cc14d71c 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c
@@ -335,6 +335,11 @@ static void rtl8180_tx(struct ieee80211_hw *dev,
 	entry->flags2 = info->control.rates[1].idx >= 0 ?
 		ieee80211_get_alt_retry_rate(dev, info, 0)->bitrate << 4 : 0;
 	entry->retry_limit = info->control.rates[0].count;
+
+	/* We must be sure that tx_flags is written last because the HW
+	 * looks at it to check if the rest of data is valid or not
+	 */
+	wmb();
 	entry->flags = cpu_to_le32(tx_flags);
 	__skb_queue_tail(&ring->queue, skb);
 	if (ring->entries - skb_queue_len(&ring->queue) < 2)
-- 
cgit v1.2.2


From c24782e612dce377cf9149ad787998af7694f757 Mon Sep 17 00:00:00 2001
From: andrea merello <andrea.merello@gmail.com>
Date: Tue, 18 Feb 2014 02:10:46 +0100
Subject: rtl818x: make sure TX descriptor writes are done before kicking DMA

The TX descriptors are consumed by the HW using DMA.
Even if in the driver code the TX descriptor writes appears before
the HW "dma kick" register writes, the CPU may reorder them.

If this happens, the TX may not happen at all becase the "valid"
descriptor flag may have not been set yet.

This patch adds a write memory barrier to ensures the TX
descriptor is written before writing to the HW "dma kick" register.

Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl8180/dev.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c
index 45d2cc14d71c..959e699702e8 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c
@@ -341,6 +341,12 @@ static void rtl8180_tx(struct ieee80211_hw *dev,
 	 */
 	wmb();
 	entry->flags = cpu_to_le32(tx_flags);
+	/* We must be sure this has been written before followings HW
+	 * register write, because this write will made the HW attempts
+	 * to DMA the just-written data
+	 */
+	wmb();
+
 	__skb_queue_tail(&ring->queue, skb);
 	if (ring->entries - skb_queue_len(&ring->queue) < 2)
 		ieee80211_stop_queue(dev, prio);
-- 
cgit v1.2.2


From aa45a673b291fd761275493bc15316d79555ed55 Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Fri, 28 Feb 2014 15:16:43 -0600
Subject: rtlwifi: btcoexist: Add new mini driver

A new driver in the rtlwifi family for the RTL8723BE will soon be added.
The bluetooth coexistence code for this device has been split into a separate
mini driver as it will be shared with other devices.  This commit adds the
the headers and sources, and modifies Kconfig and Makefile to configure and
build this driver.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtlwifi/Kconfig               |    8 +-
 drivers/net/wireless/rtlwifi/Makefile              |    1 +
 drivers/net/wireless/rtlwifi/btcoexist/Makefile    |    7 +
 .../net/wireless/rtlwifi/btcoexist/halbt_precomp.h |   87 +
 .../wireless/rtlwifi/btcoexist/halbtc8723b2ant.c   | 3698 ++++++++++++++++++++
 .../wireless/rtlwifi/btcoexist/halbtc8723b2ant.h   |  173 +
 .../net/wireless/rtlwifi/btcoexist/halbtcoutsrc.c  | 1011 ++++++
 .../net/wireless/rtlwifi/btcoexist/halbtcoutsrc.h  |  559 +++
 drivers/net/wireless/rtlwifi/btcoexist/rtl_btc.c   |  218 ++
 drivers/net/wireless/rtlwifi/btcoexist/rtl_btc.h   |   52 +
 .../net/wireless/rtlwifi/rtl8723com/fw_common.c    |  849 +++++
 .../net/wireless/rtlwifi/rtl8723com/fw_common.h    |   50 +
 .../net/wireless/rtlwifi/rtl8723com/phy_common.h   |   75 +
 drivers/net/wireless/rtlwifi/wifi.h                |   60 +
 14 files changed, 6847 insertions(+), 1 deletion(-)
 create mode 100644 drivers/net/wireless/rtlwifi/btcoexist/Makefile
 create mode 100644 drivers/net/wireless/rtlwifi/btcoexist/halbt_precomp.h
 create mode 100644 drivers/net/wireless/rtlwifi/btcoexist/halbtc8723b2ant.c
 create mode 100644 drivers/net/wireless/rtlwifi/btcoexist/halbtc8723b2ant.h
 create mode 100644 drivers/net/wireless/rtlwifi/btcoexist/halbtcoutsrc.c
 create mode 100644 drivers/net/wireless/rtlwifi/btcoexist/halbtcoutsrc.h
 create mode 100644 drivers/net/wireless/rtlwifi/btcoexist/rtl_btc.c
 create mode 100644 drivers/net/wireless/rtlwifi/btcoexist/rtl_btc.h
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8723com/fw_common.c
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8723com/fw_common.h
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8723com/phy_common.h

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtlwifi/Kconfig b/drivers/net/wireless/rtlwifi/Kconfig
index c2ffce7a907c..29c6ce5c3371 100644
--- a/drivers/net/wireless/rtlwifi/Kconfig
+++ b/drivers/net/wireless/rtlwifi/Kconfig
@@ -5,7 +5,7 @@ menuconfig RTL_CARDS
 	---help---
 	  This option will enable support for the Realtek mac80211-based
 	  wireless drivers. Drivers rtl8192ce, rtl8192cu, rtl8192se, rtl8192de,
-	  rtl8723eu, and rtl8188eu share some common code.
+	  rtl8723ae, and rtl8188ae share some common code.
 
 if RTL_CARDS
 
@@ -48,6 +48,7 @@ config RTL8723AE
 	depends on PCI
 	select RTLWIFI
 	select RTLWIFI_PCI
+	select RTLBTCOEXIST
 	---help---
 	This is the driver for Realtek RTL8723AE 802.11n PCIe
 	wireless network adapters.
@@ -101,4 +102,9 @@ config RTL8192C_COMMON
 	depends on RTL8192CE || RTL8192CU
 	default y
 
+config RTLBTCOEXIST
+	tristate
+	depends on RTL8723AE
+	default y
+
 endif
diff --git a/drivers/net/wireless/rtlwifi/Makefile b/drivers/net/wireless/rtlwifi/Makefile
index d56f023a4b90..f354c5f9aed5 100644
--- a/drivers/net/wireless/rtlwifi/Makefile
+++ b/drivers/net/wireless/rtlwifi/Makefile
@@ -25,5 +25,6 @@ obj-$(CONFIG_RTL8192SE)		+= rtl8192se/
 obj-$(CONFIG_RTL8192DE)		+= rtl8192de/
 obj-$(CONFIG_RTL8723AE)		+= rtl8723ae/
 obj-$(CONFIG_RTL8188EE)		+= rtl8188ee/
+obj-$(CONFIG_RTLBTCOEXIST)	+= btcoexist/
 
 ccflags-y += -D__CHECK_ENDIAN__
diff --git a/drivers/net/wireless/rtlwifi/btcoexist/Makefile b/drivers/net/wireless/rtlwifi/btcoexist/Makefile
new file mode 100644
index 000000000000..47ceecfcb7dc
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/btcoexist/Makefile
@@ -0,0 +1,7 @@
+btcoexist-objs :=	halbtc8723b2ant.o	\
+			halbtcoutsrc.o		\
+			rtl_btc.o
+
+obj-$(CONFIG_RTLBTCOEXIST) += btcoexist.o
+
+ccflags-y += -D__CHECK_ENDIAN__
diff --git a/drivers/net/wireless/rtlwifi/btcoexist/halbt_precomp.h b/drivers/net/wireless/rtlwifi/btcoexist/halbt_precomp.h
new file mode 100644
index 000000000000..582532fc199a
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/btcoexist/halbt_precomp.h
@@ -0,0 +1,87 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ ******************************************************************************/
+
+#ifndef	__HALBT_PRECOMP_H__
+#define __HALBT_PRECOMP_H__
+/*************************************************************
+ * include files
+ *************************************************************/
+#include "../wifi.h"
+#include "../efuse.h"
+#include "../base.h"
+#include "../regd.h"
+#include "../cam.h"
+#include "../ps.h"
+#include "../pci.h"
+
+#include "halbtcoutsrc.h"
+
+#include "halbtc8723b2ant.h"
+
+#define BIT0	0x00000001
+#define BIT1	0x00000002
+#define BIT2	0x00000004
+#define BIT3	0x00000008
+#define BIT4	0x00000010
+#define BIT5	0x00000020
+#define BIT6	0x00000040
+#define BIT7	0x00000080
+#define BIT8	0x00000100
+#define BIT9	0x00000200
+#define BIT10	0x00000400
+#define BIT11	0x00000800
+#define BIT12	0x00001000
+#define BIT13	0x00002000
+#define BIT14	0x00004000
+#define BIT15	0x00008000
+#define BIT16	0x00010000
+#define BIT17	0x00020000
+#define BIT18	0x00040000
+#define BIT19	0x00080000
+#define BIT20	0x00100000
+#define BIT21	0x00200000
+#define BIT22	0x00400000
+#define BIT23	0x00800000
+#define BIT24	0x01000000
+#define BIT25	0x02000000
+#define BIT26	0x04000000
+#define BIT27	0x08000000
+#define BIT28	0x10000000
+#define BIT29	0x20000000
+#define BIT30	0x40000000
+#define BIT31	0x80000000
+
+#define	MASKBYTE0	0xff
+#define	MASKBYTE1	0xff00
+#define	MASKBYTE2	0xff0000
+#define	MASKBYTE3	0xff000000
+#define	MASKHWORD	0xffff0000
+#define	MASKLWORD	0x0000ffff
+#define	MASKDWORD	0xffffffff
+#define	MASK12BITS	0xfff
+#define	MASKH4BITS	0xf0000000
+#define MASKOFDM_D	0xffc00000
+#define	MASKCCK		0x3f3f3f3f
+
+#endif	/* __HALBT_PRECOMP_H__ */
diff --git a/drivers/net/wireless/rtlwifi/btcoexist/halbtc8723b2ant.c b/drivers/net/wireless/rtlwifi/btcoexist/halbtc8723b2ant.c
new file mode 100644
index 000000000000..d916ab9f3c38
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/btcoexist/halbtc8723b2ant.c
@@ -0,0 +1,3698 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2012  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+/***************************************************************
+ * Description:
+ *
+ * This file is for RTL8723B Co-exist mechanism
+ *
+ * History
+ * 2012/11/15 Cosa first check in.
+ *
+ **************************************************************/
+/**************************************************************
+ * include files
+ **************************************************************/
+#include "halbt_precomp.h"
+/**************************************************************
+ * Global variables, these are static variables
+ **************************************************************/
+static struct coex_dm_8723b_2ant glcoex_dm_8723b_2ant;
+static struct coex_dm_8723b_2ant *coex_dm = &glcoex_dm_8723b_2ant;
+static struct coex_sta_8723b_2ant glcoex_sta_8723b_2ant;
+static struct coex_sta_8723b_2ant *coex_sta = &glcoex_sta_8723b_2ant;
+
+static const char *const glbt_info_src_8723b_2ant[] = {
+	"BT Info[wifi fw]",
+	"BT Info[bt rsp]",
+	"BT Info[bt auto report]",
+};
+
+static u32 glcoex_ver_date_8723b_2ant = 20130731;
+static u32 glcoex_ver_8723b_2ant = 0x3b;
+
+/**************************************************************
+ * local function proto type if needed
+ **************************************************************/
+/**************************************************************
+ * local function start with btc8723b2ant_
+ **************************************************************/
+static u8 btc8723b2ant_bt_rssi_state(u8 level_num, u8 rssi_thresh,
+				     u8 rssi_thresh1)
+{
+	s32 bt_rssi = 0;
+	u8 bt_rssi_state = coex_sta->pre_bt_rssi_state;
+
+	bt_rssi = coex_sta->bt_rssi;
+
+	if (level_num == 2) {
+		if ((coex_sta->pre_bt_rssi_state == BTC_RSSI_STATE_LOW) ||
+		    (coex_sta->pre_bt_rssi_state == BTC_RSSI_STATE_STAY_LOW)) {
+			if (bt_rssi >= rssi_thresh +
+				       BTC_RSSI_COEX_THRESH_TOL_8723B_2ANT) {
+				bt_rssi_state = BTC_RSSI_STATE_HIGH;
+				BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_BT_RSSI_STATE,
+					  "[BTCoex], BT Rssi state "
+					  "switch to High\n");
+			} else {
+				bt_rssi_state = BTC_RSSI_STATE_STAY_LOW;
+				BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_BT_RSSI_STATE,
+					  "[BTCoex], BT Rssi state "
+					  "stay at Low\n");
+			}
+		} else {
+			if (bt_rssi < rssi_thresh) {
+				bt_rssi_state = BTC_RSSI_STATE_LOW;
+				BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_BT_RSSI_STATE,
+					  "[BTCoex], BT Rssi state "
+					  "switch to Low\n");
+			} else {
+				bt_rssi_state = BTC_RSSI_STATE_STAY_HIGH;
+				BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_BT_RSSI_STATE,
+					  "[BTCoex], BT Rssi state "
+					  "stay at High\n");
+			}
+		}
+	} else if (level_num == 3) {
+		if (rssi_thresh > rssi_thresh1) {
+			BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_BT_RSSI_STATE,
+				  "[BTCoex], BT Rssi thresh error!!\n");
+			return coex_sta->pre_bt_rssi_state;
+		}
+
+		if ((coex_sta->pre_bt_rssi_state == BTC_RSSI_STATE_LOW) ||
+		    (coex_sta->pre_bt_rssi_state == BTC_RSSI_STATE_STAY_LOW)) {
+			if (bt_rssi >= rssi_thresh +
+				       BTC_RSSI_COEX_THRESH_TOL_8723B_2ANT) {
+				bt_rssi_state = BTC_RSSI_STATE_MEDIUM;
+				BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_BT_RSSI_STATE,
+					  "[BTCoex], BT Rssi state "
+					  "switch to Medium\n");
+			} else {
+				bt_rssi_state = BTC_RSSI_STATE_STAY_LOW;
+				BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_BT_RSSI_STATE,
+					  "[BTCoex], BT Rssi state "
+					  "stay at Low\n");
+			}
+		} else if ((coex_sta->pre_bt_rssi_state ==
+						BTC_RSSI_STATE_MEDIUM) ||
+			   (coex_sta->pre_bt_rssi_state ==
+						BTC_RSSI_STATE_STAY_MEDIUM)) {
+			if (bt_rssi >= rssi_thresh1 +
+				       BTC_RSSI_COEX_THRESH_TOL_8723B_2ANT) {
+				bt_rssi_state = BTC_RSSI_STATE_HIGH;
+				BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_BT_RSSI_STATE,
+					  "[BTCoex], BT Rssi state "
+					  "switch to High\n");
+			} else if (bt_rssi < rssi_thresh) {
+				bt_rssi_state = BTC_RSSI_STATE_LOW;
+				BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_BT_RSSI_STATE,
+					  "[BTCoex], BT Rssi state "
+					  "switch to Low\n");
+			} else {
+				bt_rssi_state = BTC_RSSI_STATE_STAY_MEDIUM;
+				BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_BT_RSSI_STATE,
+					  "[BTCoex], BT Rssi state "
+					  "stay at Medium\n");
+			}
+		} else {
+			if (bt_rssi < rssi_thresh1) {
+				bt_rssi_state = BTC_RSSI_STATE_MEDIUM;
+				BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_BT_RSSI_STATE,
+					  "[BTCoex], BT Rssi state "
+					  "switch to Medium\n");
+			} else {
+				bt_rssi_state = BTC_RSSI_STATE_STAY_HIGH;
+				BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_BT_RSSI_STATE,
+					  "[BTCoex], BT Rssi state "
+					  "stay at High\n");
+			}
+		}
+	}
+
+	coex_sta->pre_bt_rssi_state = bt_rssi_state;
+
+	return bt_rssi_state;
+}
+
+static u8 btc8723b2ant_wifi_rssi_state(struct btc_coexist *btcoexist,
+				       u8 index, u8 level_num,
+				       u8 rssi_thresh, u8 rssi_thresh1)
+{
+	s32 wifi_rssi = 0;
+	u8 wifi_rssi_state = coex_sta->pre_wifi_rssi_state[index];
+
+	btcoexist->btc_get(btcoexist, BTC_GET_S4_WIFI_RSSI, &wifi_rssi);
+
+	if (level_num == 2) {
+		if ((coex_sta->pre_wifi_rssi_state[index] ==
+						BTC_RSSI_STATE_LOW) ||
+		    (coex_sta->pre_wifi_rssi_state[index] ==
+						BTC_RSSI_STATE_STAY_LOW)) {
+			if (wifi_rssi >= rssi_thresh +
+					 BTC_RSSI_COEX_THRESH_TOL_8723B_2ANT) {
+				wifi_rssi_state = BTC_RSSI_STATE_HIGH;
+				BTC_PRINT(BTC_MSG_ALGORITHM,
+					  ALGO_WIFI_RSSI_STATE,
+					  "[BTCoex], wifi RSSI state "
+					  "switch to High\n");
+			} else {
+				wifi_rssi_state = BTC_RSSI_STATE_STAY_LOW;
+				BTC_PRINT(BTC_MSG_ALGORITHM,
+					  ALGO_WIFI_RSSI_STATE,
+					  "[BTCoex], wifi RSSI state "
+					  "stay at Low\n");
+			}
+		} else {
+			if (wifi_rssi < rssi_thresh) {
+				wifi_rssi_state = BTC_RSSI_STATE_LOW;
+				BTC_PRINT(BTC_MSG_ALGORITHM,
+					  ALGO_WIFI_RSSI_STATE,
+					  "[BTCoex], wifi RSSI state "
+					  "switch to Low\n");
+			} else {
+				wifi_rssi_state = BTC_RSSI_STATE_STAY_HIGH;
+				BTC_PRINT(BTC_MSG_ALGORITHM,
+					  ALGO_WIFI_RSSI_STATE,
+					  "[BTCoex], wifi RSSI state "
+					  "stay at High\n");
+			}
+		}
+	} else if (level_num == 3) {
+		if (rssi_thresh > rssi_thresh1) {
+			BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_WIFI_RSSI_STATE,
+				  "[BTCoex], wifi RSSI thresh error!!\n");
+			return coex_sta->pre_wifi_rssi_state[index];
+		}
+
+		if ((coex_sta->pre_wifi_rssi_state[index] ==
+						BTC_RSSI_STATE_LOW) ||
+		    (coex_sta->pre_wifi_rssi_state[index] ==
+						BTC_RSSI_STATE_STAY_LOW)) {
+			if (wifi_rssi >= rssi_thresh +
+					BTC_RSSI_COEX_THRESH_TOL_8723B_2ANT) {
+				wifi_rssi_state = BTC_RSSI_STATE_MEDIUM;
+				BTC_PRINT(BTC_MSG_ALGORITHM,
+					  ALGO_WIFI_RSSI_STATE,
+					  "[BTCoex], wifi RSSI state "
+					  "switch to Medium\n");
+			} else {
+				wifi_rssi_state = BTC_RSSI_STATE_STAY_LOW;
+				BTC_PRINT(BTC_MSG_ALGORITHM,
+					  ALGO_WIFI_RSSI_STATE,
+					  "[BTCoex], wifi RSSI state "
+					  "stay at Low\n");
+			}
+		} else if ((coex_sta->pre_wifi_rssi_state[index] ==
+						BTC_RSSI_STATE_MEDIUM) ||
+			   (coex_sta->pre_wifi_rssi_state[index] ==
+						BTC_RSSI_STATE_STAY_MEDIUM)) {
+			if (wifi_rssi >= rssi_thresh1 +
+					 BTC_RSSI_COEX_THRESH_TOL_8723B_2ANT) {
+				wifi_rssi_state = BTC_RSSI_STATE_HIGH;
+				BTC_PRINT(BTC_MSG_ALGORITHM,
+					  ALGO_WIFI_RSSI_STATE,
+					  "[BTCoex], wifi RSSI state "
+					  "switch to High\n");
+			} else if (wifi_rssi < rssi_thresh) {
+				wifi_rssi_state = BTC_RSSI_STATE_LOW;
+				BTC_PRINT(BTC_MSG_ALGORITHM,
+					  ALGO_WIFI_RSSI_STATE,
+					  "[BTCoex], wifi RSSI state "
+					  "switch to Low\n");
+			} else {
+				wifi_rssi_state = BTC_RSSI_STATE_STAY_MEDIUM;
+				BTC_PRINT(BTC_MSG_ALGORITHM,
+					  ALGO_WIFI_RSSI_STATE,
+					  "[BTCoex], wifi RSSI state "
+					  "stay at Medium\n");
+			}
+		} else {
+			if (wifi_rssi < rssi_thresh1) {
+				wifi_rssi_state = BTC_RSSI_STATE_MEDIUM;
+				BTC_PRINT(BTC_MSG_ALGORITHM,
+					  ALGO_WIFI_RSSI_STATE,
+					  "[BTCoex], wifi RSSI state "
+					  "switch to Medium\n");
+			} else {
+				wifi_rssi_state = BTC_RSSI_STATE_STAY_HIGH;
+				BTC_PRINT(BTC_MSG_ALGORITHM,
+					  ALGO_WIFI_RSSI_STATE,
+					  "[BTCoex], wifi RSSI state "
+					  "stay at High\n");
+			}
+		}
+	}
+
+	coex_sta->pre_wifi_rssi_state[index] = wifi_rssi_state;
+
+	return wifi_rssi_state;
+}
+
+static void btc8723b2ant_monitor_bt_ctr(struct btc_coexist *btcoexist)
+{
+	u32 reg_hp_txrx, reg_lp_txrx, u32tmp;
+	u32 reg_hp_tx = 0, reg_hp_rx = 0;
+	u32 reg_lp_tx = 0, reg_lp_rx = 0;
+
+	reg_hp_txrx = 0x770;
+	reg_lp_txrx = 0x774;
+
+	u32tmp = btcoexist->btc_read_4byte(btcoexist, reg_hp_txrx);
+	reg_hp_tx = u32tmp & MASKLWORD;
+	reg_hp_rx = (u32tmp & MASKHWORD) >> 16;
+
+	u32tmp = btcoexist->btc_read_4byte(btcoexist, reg_lp_txrx);
+	reg_lp_tx = u32tmp & MASKLWORD;
+	reg_lp_rx = (u32tmp & MASKHWORD) >> 16;
+
+	coex_sta->high_priority_tx = reg_hp_tx;
+	coex_sta->high_priority_rx = reg_hp_rx;
+	coex_sta->low_priority_tx = reg_lp_tx;
+	coex_sta->low_priority_rx = reg_lp_rx;
+
+	BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_BT_MONITOR,
+		  "[BTCoex], High Priority Tx/Rx(reg 0x%x)=0x%x(%d)/0x%x(%d)\n",
+		  reg_hp_txrx, reg_hp_tx, reg_hp_tx, reg_hp_rx, reg_hp_rx);
+	BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_BT_MONITOR,
+		  "[BTCoex], Low Priority Tx/Rx(reg 0x%x)=0x%x(%d)/0x%x(%d)\n",
+		  reg_lp_txrx, reg_lp_tx, reg_lp_tx, reg_lp_rx, reg_lp_rx);
+
+	/* reset counter */
+	btcoexist->btc_write_1byte(btcoexist, 0x76e, 0xc);
+}
+
+static bool btc8723b2ant_is_wifi_status_changed(struct btc_coexist *btcoexist)
+{
+	static bool pre_wifi_busy;
+	static bool pre_under_4way;
+	static bool pre_bt_hs_on;
+	bool wifi_busy = false, under_4way = false, bt_hs_on = false;
+	bool wifi_connected = false;
+
+	btcoexist->btc_get(btcoexist, BTC_GET_BL_WIFI_CONNECTED,
+			   &wifi_connected);
+	btcoexist->btc_get(btcoexist, BTC_GET_BL_WIFI_BUSY, &wifi_busy);
+	btcoexist->btc_get(btcoexist, BTC_GET_BL_HS_OPERATION, &bt_hs_on);
+	btcoexist->btc_get(btcoexist, BTC_GET_BL_WIFI_4_WAY_PROGRESS,
+			   &under_4way);
+
+	if (wifi_connected) {
+		if (wifi_busy != pre_wifi_busy) {
+			pre_wifi_busy = wifi_busy;
+			return true;
+		}
+
+		if (under_4way != pre_under_4way) {
+			pre_under_4way = under_4way;
+			return true;
+		}
+
+		if (bt_hs_on != pre_bt_hs_on) {
+			pre_bt_hs_on = bt_hs_on;
+			return true;
+		}
+	}
+
+	return false;
+}
+
+static void btc8723b2ant_update_bt_link_info(struct btc_coexist *btcoexist)
+{
+	/*struct btc_stack_info *stack_info = &btcoexist->stack_info;*/
+	struct btc_bt_link_info *bt_link_info = &btcoexist->bt_link_info;
+	bool bt_hs_on = false;
+
+#if (BT_AUTO_REPORT_ONLY_8723B_2ANT == 1) /* profile from bt patch */
+	btcoexist->btc_get(btcoexist, BTC_GET_BL_HS_OPERATION, &bt_hs_on);
+
+	bt_link_info->bt_link_exist = coex_sta->bt_link_exist;
+	bt_link_info->sco_exist = coex_sta->sco_exist;
+	bt_link_info->a2dp_exist = coex_sta->a2dp_exist;
+	bt_link_info->pan_exist = coex_sta->pan_exist;
+	bt_link_info->hid_exist = coex_sta->hid_exist;
+
+	/* work around for HS mode. */
+	if (bt_hs_on) {
+		bt_link_info->pan_exist = true;
+		bt_link_info->bt_link_exist = true;
+	}
+#else	/* profile from bt stack */
+	bt_link_info->bt_link_exist = stack_info->bt_link_exist;
+	bt_link_info->sco_exist = stack_info->sco_exist;
+	bt_link_info->a2dp_exist = stack_info->a2dp_exist;
+	bt_link_info->pan_exist = stack_info->pan_exist;
+	bt_link_info->hid_exist = stack_info->hid_exist;
+
+	/*for win-8 stack HID report error*/
+	if (!stack_info->hid_exist)
+		stack_info->hid_exist = coex_sta->hid_exist;
+	/*sync  BTInfo with BT firmware and stack*/
+	/* when stack HID report error, here we use the info from bt fw.*/
+	if (!stack_info->bt_link_exist)
+		stack_info->bt_link_exist = coex_sta->bt_link_exist;
+#endif
+	/* check if Sco only */
+	if (bt_link_info->sco_exist && !bt_link_info->a2dp_exist &&
+	    !bt_link_info->pan_exist && !bt_link_info->hid_exist)
+		bt_link_info->sco_only = true;
+	else
+		bt_link_info->sco_only = false;
+
+	/* check if A2dp only */
+	if (!bt_link_info->sco_exist && bt_link_info->a2dp_exist &&
+	    !bt_link_info->pan_exist && !bt_link_info->hid_exist)
+		bt_link_info->a2dp_only = true;
+	else
+		bt_link_info->a2dp_only = false;
+
+	/* check if Pan only */
+	if (!bt_link_info->sco_exist && !bt_link_info->a2dp_exist &&
+	    bt_link_info->pan_exist && !bt_link_info->hid_exist)
+		bt_link_info->pan_only = true;
+	else
+		bt_link_info->pan_only = false;
+
+	/* check if Hid only */
+	if (!bt_link_info->sco_exist && !bt_link_info->a2dp_exist &&
+	    !bt_link_info->pan_exist && bt_link_info->hid_exist)
+		bt_link_info->hid_only = true;
+	else
+		bt_link_info->hid_only = false;
+}
+
+static u8 btc8723b2ant_action_algorithm(struct btc_coexist *btcoexist)
+{
+	struct btc_bt_link_info *bt_link_info = &btcoexist->bt_link_info;
+	bool bt_hs_on = false;
+	u8 algorithm = BT_8723B_2ANT_COEX_ALGO_UNDEFINED;
+	u8 num_of_diff_profile = 0;
+
+	btcoexist->btc_get(btcoexist, BTC_GET_BL_HS_OPERATION, &bt_hs_on);
+
+	if (!bt_link_info->bt_link_exist) {
+		BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+			  "[BTCoex], No BT link exists!!!\n");
+		return algorithm;
+	}
+
+	if (bt_link_info->sco_exist)
+		num_of_diff_profile++;
+	if (bt_link_info->hid_exist)
+		num_of_diff_profile++;
+	if (bt_link_info->pan_exist)
+		num_of_diff_profile++;
+	if (bt_link_info->a2dp_exist)
+		num_of_diff_profile++;
+
+	if (num_of_diff_profile == 1) {
+		if (bt_link_info->sco_exist) {
+			BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+				  "[BTCoex], SCO only\n");
+			algorithm = BT_8723B_2ANT_COEX_ALGO_SCO;
+		} else {
+			if (bt_link_info->hid_exist) {
+				BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+					  "[BTCoex], HID only\n");
+				algorithm = BT_8723B_2ANT_COEX_ALGO_HID;
+			} else if (bt_link_info->a2dp_exist) {
+				BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+					  "[BTCoex], A2DP only\n");
+				algorithm = BT_8723B_2ANT_COEX_ALGO_A2DP;
+			} else if (bt_link_info->pan_exist) {
+				if (bt_hs_on) {
+					BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+						  "[BTCoex], PAN(HS) only\n");
+					algorithm =
+						BT_8723B_2ANT_COEX_ALGO_PANHS;
+				} else {
+					BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+						  "[BTCoex], PAN(EDR) only\n");
+					algorithm =
+						BT_8723B_2ANT_COEX_ALGO_PANEDR;
+				}
+			}
+		}
+	} else if (num_of_diff_profile == 2) {
+		if (bt_link_info->sco_exist) {
+			if (bt_link_info->hid_exist) {
+				BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+					  "[BTCoex], SCO + HID\n");
+				algorithm = BT_8723B_2ANT_COEX_ALGO_PANEDR_HID;
+			} else if (bt_link_info->a2dp_exist) {
+				BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+					  "[BTCoex], SCO + A2DP ==> SCO\n");
+				algorithm = BT_8723B_2ANT_COEX_ALGO_PANEDR_HID;
+			} else if (bt_link_info->pan_exist) {
+				if (bt_hs_on) {
+					BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+						  "[BTCoex], SCO + PAN(HS)\n");
+					algorithm = BT_8723B_2ANT_COEX_ALGO_SCO;
+				} else {
+					BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+						  "[BTCoex], SCO + PAN(EDR)\n");
+					algorithm =
+					    BT_8723B_2ANT_COEX_ALGO_PANEDR_HID;
+				}
+			}
+		} else {
+			if (bt_link_info->hid_exist &&
+			    bt_link_info->a2dp_exist) {
+				BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+					  "[BTCoex], HID + A2DP\n");
+				algorithm = BT_8723B_2ANT_COEX_ALGO_HID_A2DP;
+			} else if (bt_link_info->hid_exist &&
+				   bt_link_info->pan_exist) {
+				if (bt_hs_on) {
+					BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+						  "[BTCoex], HID + PAN(HS)\n");
+					algorithm = BT_8723B_2ANT_COEX_ALGO_HID;
+				} else {
+					BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+						  "[BTCoex], HID + PAN(EDR)\n");
+					algorithm =
+					    BT_8723B_2ANT_COEX_ALGO_PANEDR_HID;
+				}
+			} else if (bt_link_info->pan_exist &&
+				   bt_link_info->a2dp_exist) {
+				if (bt_hs_on) {
+					BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+						  "[BTCoex], A2DP + PAN(HS)\n");
+					algorithm =
+					    BT_8723B_2ANT_COEX_ALGO_A2DP_PANHS;
+				} else {
+					BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+						  "[BTCoex],A2DP + PAN(EDR)\n");
+					algorithm =
+					    BT_8723B_2ANT_COEX_ALGO_PANEDR_A2DP;
+				}
+			}
+		}
+	} else if (num_of_diff_profile == 3) {
+		if (bt_link_info->sco_exist) {
+			if (bt_link_info->hid_exist &&
+			    bt_link_info->a2dp_exist) {
+				BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+					  "[BTCoex], SCO + HID + A2DP"
+					  " ==> HID\n");
+				algorithm = BT_8723B_2ANT_COEX_ALGO_PANEDR_HID;
+			} else if (bt_link_info->hid_exist &&
+				   bt_link_info->pan_exist) {
+				if (bt_hs_on) {
+					BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+						  "[BTCoex], SCO + HID + "
+						  "PAN(HS)\n");
+					algorithm =
+					    BT_8723B_2ANT_COEX_ALGO_PANEDR_HID;
+				} else {
+					BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+						  "[BTCoex], SCO + HID + "
+						  "PAN(EDR)\n");
+					algorithm =
+					    BT_8723B_2ANT_COEX_ALGO_PANEDR_HID;
+				}
+			} else if (bt_link_info->pan_exist &&
+				   bt_link_info->a2dp_exist) {
+				if (bt_hs_on) {
+					BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+						  "[BTCoex], SCO + A2DP + "
+						  "PAN(HS)\n");
+					algorithm =
+					    BT_8723B_2ANT_COEX_ALGO_PANEDR_HID;
+				} else {
+					BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+						  "[BTCoex], SCO + A2DP + "
+						  "PAN(EDR) ==> HID\n");
+					algorithm =
+					    BT_8723B_2ANT_COEX_ALGO_PANEDR_HID;
+				}
+			}
+		} else {
+			if (bt_link_info->hid_exist &&
+			    bt_link_info->pan_exist &&
+			    bt_link_info->a2dp_exist) {
+				if (bt_hs_on) {
+					BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+						  "[BTCoex], HID + A2DP + "
+						  "PAN(HS)\n");
+					algorithm =
+					    BT_8723B_2ANT_COEX_ALGO_HID_A2DP;
+				} else {
+					BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+						  "[BTCoex], HID + A2DP + "
+						  "PAN(EDR)\n");
+					algorithm =
+					BT_8723B_2ANT_COEX_ALGO_HID_A2DP_PANEDR;
+				}
+			}
+		}
+	} else if (num_of_diff_profile >= 3) {
+		if (bt_link_info->sco_exist) {
+			if (bt_link_info->hid_exist &&
+			    bt_link_info->pan_exist &&
+			    bt_link_info->a2dp_exist) {
+				if (bt_hs_on) {
+					BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+						  "[BTCoex], Error!!! SCO + HID"
+						  " + A2DP + PAN(HS)\n");
+				} else {
+					BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+						  "[BTCoex], SCO + HID + A2DP +"
+						  " PAN(EDR)==>PAN(EDR)+HID\n");
+					algorithm =
+					    BT_8723B_2ANT_COEX_ALGO_PANEDR_HID;
+				}
+			}
+		}
+	}
+	return algorithm;
+}
+
+static bool btc8723b_need_dec_pwr(struct btc_coexist *btcoexist)
+{
+	bool ret = false;
+	bool bt_hs_on = false, wifi_connected = false;
+	s32 bt_hs_rssi = 0;
+	u8 bt_rssi_state;
+
+	if (!btcoexist->btc_get(btcoexist, BTC_GET_BL_HS_OPERATION, &bt_hs_on))
+		return false;
+	if (!btcoexist->btc_get(btcoexist, BTC_GET_BL_WIFI_CONNECTED,
+				&wifi_connected))
+		return false;
+	if (!btcoexist->btc_get(btcoexist, BTC_GET_S4_HS_RSSI, &bt_hs_rssi))
+		return false;
+
+	bt_rssi_state = btc8723b2ant_bt_rssi_state(2, 35, 0);
+
+	if (wifi_connected) {
+		if (bt_hs_on) {
+			if (bt_hs_rssi > 37) {
+				BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE_FW,
+					  "[BTCoex], Need to decrease bt "
+					  "power for HS mode!!\n");
+				ret = true;
+			}
+		} else {
+			if ((bt_rssi_state == BTC_RSSI_STATE_HIGH) ||
+			    (bt_rssi_state == BTC_RSSI_STATE_STAY_HIGH)) {
+				BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE_FW,
+					  "[BTCoex], Need to decrease bt "
+					  "power for Wifi is connected!!\n");
+				ret = true;
+			}
+		}
+	}
+
+	return ret;
+}
+
+static void btc8723b2ant_set_fw_dac_swing_level(struct btc_coexist *btcoexist,
+						u8 dac_swing_lvl)
+{
+	u8 h2c_parameter[1] = {0};
+
+	/* There are several type of dacswing
+	 * 0x18/ 0x10/ 0xc/ 0x8/ 0x4/ 0x6
+	 */
+	h2c_parameter[0] = dac_swing_lvl;
+
+	BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE_FW_EXEC,
+		  "[BTCoex], Set Dac Swing Level=0x%x\n", dac_swing_lvl);
+	BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE_FW_EXEC,
+		  "[BTCoex], FW write 0x64=0x%x\n", h2c_parameter[0]);
+
+	btcoexist->btc_fill_h2c(btcoexist, 0x64, 1, h2c_parameter);
+}
+
+static void btc8723b2ant_set_fw_dec_bt_pwr(struct btc_coexist *btcoexist,
+					   bool dec_bt_pwr)
+{
+	u8 h2c_parameter[1] = {0};
+
+	h2c_parameter[0] = 0;
+
+	if (dec_bt_pwr)
+		h2c_parameter[0] |= BIT1;
+
+	BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE_FW_EXEC,
+		  "[BTCoex], decrease Bt Power : %s, FW write 0x62=0x%x\n",
+		  (dec_bt_pwr ? "Yes!!" : "No!!"), h2c_parameter[0]);
+
+	btcoexist->btc_fill_h2c(btcoexist, 0x62, 1, h2c_parameter);
+}
+
+static void btc8723b2ant_dec_bt_pwr(struct btc_coexist *btcoexist,
+				    bool force_exec, bool dec_bt_pwr)
+{
+	BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE_FW,
+		  "[BTCoex], %s Dec BT power = %s\n",
+		  (force_exec ? "force to" : ""), (dec_bt_pwr ? "ON" : "OFF"));
+	coex_dm->cur_dec_bt_pwr = dec_bt_pwr;
+
+	if (!force_exec) {
+		BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE_FW_DETAIL,
+			  "[BTCoex], bPreDecBtPwr=%d, bCurDecBtPwr=%d\n",
+			  coex_dm->pre_dec_bt_pwr, coex_dm->cur_dec_bt_pwr);
+
+		if (coex_dm->pre_dec_bt_pwr == coex_dm->cur_dec_bt_pwr)
+			return;
+	}
+	btc8723b2ant_set_fw_dec_bt_pwr(btcoexist, coex_dm->cur_dec_bt_pwr);
+
+	coex_dm->pre_dec_bt_pwr = coex_dm->cur_dec_bt_pwr;
+}
+
+static void btc8723b2ant_fw_dac_swing_lvl(struct btc_coexist *btcoexist,
+					  bool force_exec, u8 fw_dac_swing_lvl)
+{
+	BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE_FW,
+		  "[BTCoex], %s set FW Dac Swing level = %d\n",
+		  (force_exec ? "force to" : ""), fw_dac_swing_lvl);
+	coex_dm->cur_fw_dac_swing_lvl = fw_dac_swing_lvl;
+
+	if (!force_exec) {
+		BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE_FW_DETAIL,
+			  "[BTCoex], preFwDacSwingLvl=%d, "
+			  "curFwDacSwingLvl=%d\n",
+			  coex_dm->pre_fw_dac_swing_lvl,
+			  coex_dm->cur_fw_dac_swing_lvl);
+
+		if (coex_dm->pre_fw_dac_swing_lvl ==
+		   coex_dm->cur_fw_dac_swing_lvl)
+			return;
+	}
+
+	btc8723b2ant_set_fw_dac_swing_level(btcoexist,
+					    coex_dm->cur_fw_dac_swing_lvl);
+	coex_dm->pre_fw_dac_swing_lvl = coex_dm->cur_fw_dac_swing_lvl;
+}
+
+static void btc8723b2ant_set_sw_rf_rx_lpf_corner(struct btc_coexist *btcoexist,
+						 bool rx_rf_shrink_on)
+{
+	if (rx_rf_shrink_on) {
+		/* Shrink RF Rx LPF corner */
+		BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE_SW_EXEC,
+			  "[BTCoex], Shrink RF Rx LPF corner!!\n");
+		btcoexist->btc_set_rf_reg(btcoexist, BTC_RF_A, 0x1e,
+					  0xfffff, 0xffffc);
+	} else {
+		/* Resume RF Rx LPF corner */
+		/* After initialized, we can use coex_dm->btRf0x1eBackup */
+		if (btcoexist->initilized) {
+			BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE_SW_EXEC,
+				  "[BTCoex], Resume RF Rx LPF corner!!\n");
+			btcoexist->btc_set_rf_reg(btcoexist, BTC_RF_A, 0x1e,
+						  0xfffff,
+						  coex_dm->bt_rf0x1e_backup);
+		}
+	}
+}
+
+static void btc8723b2ant_rf_shrink(struct btc_coexist *btcoexist,
+				   bool force_exec, bool rx_rf_shrink_on)
+{
+	BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE_SW,
+		  "[BTCoex], %s turn Rx RF Shrink = %s\n",
+		  (force_exec ? "force to" : ""), (rx_rf_shrink_on ?
+		  "ON" : "OFF"));
+	coex_dm->cur_rf_rx_lpf_shrink = rx_rf_shrink_on;
+
+	if (!force_exec) {
+		BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE_SW_DETAIL,
+			  "[BTCoex], bPreRfRxLpfShrink=%d, "
+			  "bCurRfRxLpfShrink=%d\n",
+			  coex_dm->pre_rf_rx_lpf_shrink,
+			  coex_dm->cur_rf_rx_lpf_shrink);
+
+		if (coex_dm->pre_rf_rx_lpf_shrink ==
+		    coex_dm->cur_rf_rx_lpf_shrink)
+			return;
+	}
+	btc8723b2ant_set_sw_rf_rx_lpf_corner(btcoexist,
+					     coex_dm->cur_rf_rx_lpf_shrink);
+
+	coex_dm->pre_rf_rx_lpf_shrink = coex_dm->cur_rf_rx_lpf_shrink;
+}
+
+static void btc8723b_set_penalty_txrate(struct btc_coexist *btcoexist,
+					bool low_penalty_ra)
+{
+	u8 h2c_parameter[6] = {0};
+
+	h2c_parameter[0] = 0x6;	/* opCode, 0x6= Retry_Penalty*/
+
+	if (low_penalty_ra) {
+		h2c_parameter[1] |= BIT0;
+		/*normal rate except MCS7/6/5, OFDM54/48/36*/
+		h2c_parameter[2] = 0x00;
+		h2c_parameter[3] = 0xf7;  /*MCS7 or OFDM54*/
+		h2c_parameter[4] = 0xf8;  /*MCS6 or OFDM48*/
+		h2c_parameter[5] = 0xf9;  /*MCS5 or OFDM36*/
+	}
+
+	BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE_FW_EXEC,
+		  "[BTCoex], set WiFi Low-Penalty Retry: %s",
+		  (low_penalty_ra ? "ON!!" : "OFF!!"));
+
+	btcoexist->btc_fill_h2c(btcoexist, 0x69, 6, h2c_parameter);
+}
+
+static void btc8723b2ant_low_penalty_ra(struct btc_coexist *btcoexist,
+					bool force_exec, bool low_penalty_ra)
+{
+	/*return; */
+	BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE_SW,
+		  "[BTCoex], %s turn LowPenaltyRA = %s\n",
+		  (force_exec ? "force to" : ""), (low_penalty_ra ?
+		  "ON" : "OFF"));
+	coex_dm->cur_low_penalty_ra = low_penalty_ra;
+
+	if (!force_exec) {
+		BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE_SW_DETAIL,
+			  "[BTCoex], bPreLowPenaltyRa=%d, "
+			  "bCurLowPenaltyRa=%d\n",
+			  coex_dm->pre_low_penalty_ra,
+			  coex_dm->cur_low_penalty_ra);
+
+		if (coex_dm->pre_low_penalty_ra == coex_dm->cur_low_penalty_ra)
+			return;
+	}
+	btc8723b_set_penalty_txrate(btcoexist, coex_dm->cur_low_penalty_ra);
+
+	coex_dm->pre_low_penalty_ra = coex_dm->cur_low_penalty_ra;
+}
+
+static void btc8723b2ant_set_dac_swing_reg(struct btc_coexist *btcoexist,
+					   u32 level)
+{
+	u8 val = (u8) level;
+	BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE_SW_EXEC,
+		  "[BTCoex], Write SwDacSwing = 0x%x\n", level);
+	btcoexist->btc_write_1byte_bitmask(btcoexist, 0x883, 0x3e, val);
+}
+
+static void btc8723b2ant_set_sw_fulltime_dac_swing(struct btc_coexist *btcoex,
+						   bool sw_dac_swing_on,
+						   u32 sw_dac_swing_lvl)
+{
+	if (sw_dac_swing_on)
+		btc8723b2ant_set_dac_swing_reg(btcoex, sw_dac_swing_lvl);
+	else
+		btc8723b2ant_set_dac_swing_reg(btcoex, 0x18);
+}
+
+
+static void btc8723b2ant_dac_swing(struct btc_coexist *btcoexist,
+				   bool force_exec, bool dac_swing_on,
+				   u32 dac_swing_lvl)
+{
+	BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE_SW,
+		  "[BTCoex], %s turn DacSwing=%s, dac_swing_lvl=0x%x\n",
+		  (force_exec ? "force to" : ""),
+		  (dac_swing_on ? "ON" : "OFF"), dac_swing_lvl);
+	coex_dm->cur_dac_swing_on = dac_swing_on;
+	coex_dm->cur_dac_swing_lvl = dac_swing_lvl;
+
+	if (!force_exec) {
+		BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE_SW_DETAIL,
+			  "[BTCoex], bPreDacSwingOn=%d, preDacSwingLvl=0x%x,"
+			  " bCurDacSwingOn=%d, curDacSwingLvl=0x%x\n",
+			  coex_dm->pre_dac_swing_on, coex_dm->pre_dac_swing_lvl,
+			  coex_dm->cur_dac_swing_on,
+			  coex_dm->cur_dac_swing_lvl);
+
+		if ((coex_dm->pre_dac_swing_on == coex_dm->cur_dac_swing_on) &&
+		    (coex_dm->pre_dac_swing_lvl == coex_dm->cur_dac_swing_lvl))
+			return;
+	}
+	mdelay(30);
+	btc8723b2ant_set_sw_fulltime_dac_swing(btcoexist, dac_swing_on,
+					       dac_swing_lvl);
+
+	coex_dm->pre_dac_swing_on = coex_dm->cur_dac_swing_on;
+	coex_dm->pre_dac_swing_lvl = coex_dm->cur_dac_swing_lvl;
+}
+
+static void btc8723b2ant_set_agc_table(struct btc_coexist *btcoexist,
+				       bool agc_table_en)
+{
+	u8 rssi_adjust_val = 0;
+
+	/*  BB AGC Gain Table */
+	if (agc_table_en) {
+		BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE_SW_EXEC,
+			  "[BTCoex], BB Agc Table On!\n");
+		btcoexist->btc_write_4byte(btcoexist, 0xc78, 0x6e1A0001);
+		btcoexist->btc_write_4byte(btcoexist, 0xc78, 0x6d1B0001);
+		btcoexist->btc_write_4byte(btcoexist, 0xc78, 0x6c1C0001);
+		btcoexist->btc_write_4byte(btcoexist, 0xc78, 0x6b1D0001);
+		btcoexist->btc_write_4byte(btcoexist, 0xc78, 0x6a1E0001);
+		btcoexist->btc_write_4byte(btcoexist, 0xc78, 0x691F0001);
+		btcoexist->btc_write_4byte(btcoexist, 0xc78, 0x68200001);
+	} else {
+		BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE_SW_EXEC,
+			  "[BTCoex], BB Agc Table Off!\n");
+		btcoexist->btc_write_4byte(btcoexist, 0xc78, 0xaa1A0001);
+		btcoexist->btc_write_4byte(btcoexist, 0xc78, 0xa91B0001);
+		btcoexist->btc_write_4byte(btcoexist, 0xc78, 0xa81C0001);
+		btcoexist->btc_write_4byte(btcoexist, 0xc78, 0xa71D0001);
+		btcoexist->btc_write_4byte(btcoexist, 0xc78, 0xa61E0001);
+		btcoexist->btc_write_4byte(btcoexist, 0xc78, 0xa51F0001);
+		btcoexist->btc_write_4byte(btcoexist, 0xc78, 0xa4200001);
+	}
+
+
+	/* RF Gain */
+	btcoexist->btc_set_rf_reg(btcoexist, BTC_RF_A, 0xef, 0xfffff, 0x02000);
+	if (agc_table_en) {
+		BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE_SW_EXEC,
+			  "[BTCoex], Agc Table On!\n");
+		btcoexist->btc_set_rf_reg(btcoexist, BTC_RF_A, 0x3b,
+					  0xfffff, 0x38fff);
+		btcoexist->btc_set_rf_reg(btcoexist, BTC_RF_A, 0x3b,
+					  0xfffff, 0x38ffe);
+	} else {
+		BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE_SW_EXEC,
+			  "[BTCoex], Agc Table Off!\n");
+		btcoexist->btc_set_rf_reg(btcoexist, BTC_RF_A, 0x3b,
+					  0xfffff, 0x380c3);
+		btcoexist->btc_set_rf_reg(btcoexist, BTC_RF_A, 0x3b,
+					  0xfffff, 0x28ce6);
+	}
+	btcoexist->btc_set_rf_reg(btcoexist, BTC_RF_A, 0xef, 0xfffff, 0x0);
+
+	btcoexist->btc_set_rf_reg(btcoexist, BTC_RF_A, 0xed, 0xfffff, 0x1);
+
+	if (agc_table_en) {
+		BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE_SW_EXEC,
+			  "[BTCoex], Agc Table On!\n");
+		btcoexist->btc_set_rf_reg(btcoexist, BTC_RF_A, 0x40,
+					  0xfffff, 0x38fff);
+		btcoexist->btc_set_rf_reg(btcoexist, BTC_RF_A, 0x40,
+					  0xfffff, 0x38ffe);
+	} else {
+		BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE_SW_EXEC,
+			  "[BTCoex], Agc Table Off!\n");
+		btcoexist->btc_set_rf_reg(btcoexist, BTC_RF_A, 0x40,
+					  0xfffff, 0x380c3);
+		btcoexist->btc_set_rf_reg(btcoexist, BTC_RF_A, 0x40,
+					  0xfffff, 0x28ce6);
+	}
+	btcoexist->btc_set_rf_reg(btcoexist, BTC_RF_A, 0xed, 0xfffff, 0x0);
+
+	/* set rssiAdjustVal for wifi module. */
+	if (agc_table_en)
+		rssi_adjust_val = 8;
+	btcoexist->btc_set(btcoexist, BTC_SET_U1_RSSI_ADJ_VAL_FOR_AGC_TABLE_ON,
+			   &rssi_adjust_val);
+}
+
+static void btc8723b2ant_agc_table(struct btc_coexist *btcoexist,
+				   bool force_exec, bool agc_table_en)
+{
+	BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE_SW,
+		  "[BTCoex], %s %s Agc Table\n",
+		  (force_exec ? "force to" : ""),
+		  (agc_table_en ? "Enable" : "Disable"));
+	coex_dm->cur_agc_table_en = agc_table_en;
+
+	if (!force_exec) {
+		BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE_SW_DETAIL,
+			  "[BTCoex], bPreAgcTableEn=%d, bCurAgcTableEn=%d\n",
+			  coex_dm->pre_agc_table_en, coex_dm->cur_agc_table_en);
+
+		if (coex_dm->pre_agc_table_en == coex_dm->cur_agc_table_en)
+			return;
+	}
+	btc8723b2ant_set_agc_table(btcoexist, agc_table_en);
+
+	coex_dm->pre_agc_table_en = coex_dm->cur_agc_table_en;
+}
+
+static void btc8723b2ant_set_coex_table(struct btc_coexist *btcoexist,
+					u32 val0x6c0, u32 val0x6c4,
+					u32 val0x6c8, u8 val0x6cc)
+{
+	BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE_SW_EXEC,
+		  "[BTCoex], set coex table, set 0x6c0=0x%x\n", val0x6c0);
+	btcoexist->btc_write_4byte(btcoexist, 0x6c0, val0x6c0);
+
+	BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE_SW_EXEC,
+		  "[BTCoex], set coex table, set 0x6c4=0x%x\n", val0x6c4);
+	btcoexist->btc_write_4byte(btcoexist, 0x6c4, val0x6c4);
+
+	BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE_SW_EXEC,
+		  "[BTCoex], set coex table, set 0x6c8=0x%x\n", val0x6c8);
+	btcoexist->btc_write_4byte(btcoexist, 0x6c8, val0x6c8);
+
+	BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE_SW_EXEC,
+		  "[BTCoex], set coex table, set 0x6cc=0x%x\n", val0x6cc);
+	btcoexist->btc_write_1byte(btcoexist, 0x6cc, val0x6cc);
+}
+
+static void btc8723b2ant_coex_table(struct btc_coexist *btcoexist,
+				    bool force_exec, u32 val0x6c0,
+				    u32 val0x6c4, u32 val0x6c8,
+				    u8 val0x6cc)
+{
+	BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE_SW,
+		  "[BTCoex], %s write Coex Table 0x6c0=0x%x,"
+		  " 0x6c4=0x%x, 0x6c8=0x%x, 0x6cc=0x%x\n",
+		  (force_exec ? "force to" : ""), val0x6c0,
+		  val0x6c4, val0x6c8, val0x6cc);
+	coex_dm->cur_val0x6c0 = val0x6c0;
+	coex_dm->cur_val0x6c4 = val0x6c4;
+	coex_dm->cur_val0x6c8 = val0x6c8;
+	coex_dm->cur_val0x6cc = val0x6cc;
+
+	if (!force_exec) {
+		BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE_SW_DETAIL,
+			  "[BTCoex], preVal0x6c0=0x%x, "
+			  "preVal0x6c4=0x%x, preVal0x6c8=0x%x, "
+			  "preVal0x6cc=0x%x !!\n",
+			  coex_dm->pre_val0x6c0, coex_dm->pre_val0x6c4,
+			  coex_dm->pre_val0x6c8, coex_dm->pre_val0x6cc);
+		BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE_SW_DETAIL,
+			  "[BTCoex], curVal0x6c0=0x%x, "
+			  "curVal0x6c4=0x%x, curVal0x6c8=0x%x, "
+			  "curVal0x6cc=0x%x !!\n",
+			  coex_dm->cur_val0x6c0, coex_dm->cur_val0x6c4,
+			  coex_dm->cur_val0x6c8, coex_dm->cur_val0x6cc);
+
+		if ((coex_dm->pre_val0x6c0 == coex_dm->cur_val0x6c0) &&
+		    (coex_dm->pre_val0x6c4 == coex_dm->cur_val0x6c4) &&
+		    (coex_dm->pre_val0x6c8 == coex_dm->cur_val0x6c8) &&
+		    (coex_dm->pre_val0x6cc == coex_dm->cur_val0x6cc))
+			return;
+	}
+	btc8723b2ant_set_coex_table(btcoexist, val0x6c0, val0x6c4,
+				    val0x6c8, val0x6cc);
+
+	coex_dm->pre_val0x6c0 = coex_dm->cur_val0x6c0;
+	coex_dm->pre_val0x6c4 = coex_dm->cur_val0x6c4;
+	coex_dm->pre_val0x6c8 = coex_dm->cur_val0x6c8;
+	coex_dm->pre_val0x6cc = coex_dm->cur_val0x6cc;
+}
+
+static void btc8723b_coex_tbl_type(struct btc_coexist *btcoexist,
+				   bool force_exec, u8 type)
+{
+	switch (type) {
+	case 0:
+		btc8723b2ant_coex_table(btcoexist, force_exec, 0x55555555,
+					0x55555555, 0xffff, 0x3);
+		break;
+	case 1:
+		btc8723b2ant_coex_table(btcoexist, force_exec, 0x55555555,
+					0x5afa5afa, 0xffff, 0x3);
+		break;
+	case 2:
+		btc8723b2ant_coex_table(btcoexist, force_exec, 0x5a5a5a5a,
+					0x5a5a5a5a, 0xffff, 0x3);
+		break;
+	case 3:
+		btc8723b2ant_coex_table(btcoexist, force_exec, 0xaaaaaaaa,
+					0xaaaaaaaa, 0xffff, 0x3);
+		break;
+	case 4:
+		btc8723b2ant_coex_table(btcoexist, force_exec, 0xffffffff,
+					0xffffffff, 0xffff, 0x3);
+		break;
+	case 5:
+		btc8723b2ant_coex_table(btcoexist, force_exec, 0x5fff5fff,
+					0x5fff5fff, 0xffff, 0x3);
+		break;
+	case 6:
+		btc8723b2ant_coex_table(btcoexist, force_exec, 0x55ff55ff,
+					0x5a5a5a5a, 0xffff, 0x3);
+		break;
+	case 7:
+		btc8723b2ant_coex_table(btcoexist, force_exec, 0x55ff55ff,
+					0x5afa5afa, 0xffff, 0x3);
+		break;
+	case 8:
+		btc8723b2ant_coex_table(btcoexist, force_exec, 0x5aea5aea,
+					0x5aea5aea, 0xffff, 0x3);
+		break;
+	case 9:
+		btc8723b2ant_coex_table(btcoexist, force_exec, 0x55ff55ff,
+					0x5aea5aea, 0xffff, 0x3);
+		break;
+	case 10:
+		btc8723b2ant_coex_table(btcoexist, force_exec, 0x55ff55ff,
+					0x5aff5aff, 0xffff, 0x3);
+		break;
+	case 11:
+		btc8723b2ant_coex_table(btcoexist, force_exec, 0x55ff55ff,
+					0x5a5f5a5f, 0xffff, 0x3);
+		break;
+	case 12:
+		btc8723b2ant_coex_table(btcoexist, force_exec, 0x55ff55ff,
+					0x5f5f5f5f, 0xffff, 0x3);
+		break;
+	default:
+		break;
+	}
+}
+
+static void btc8723b2ant_set_fw_ignore_wlan_act(struct btc_coexist *btcoexist,
+						bool enable)
+{
+	u8 h2c_parameter[1] = {0};
+
+	if (enable)
+		h2c_parameter[0] |= BIT0;/* function enable*/
+
+	BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE_FW_EXEC,
+		  "[BTCoex], set FW for BT Ignore Wlan_Act, "
+		  "FW write 0x63=0x%x\n", h2c_parameter[0]);
+
+	btcoexist->btc_fill_h2c(btcoexist, 0x63, 1, h2c_parameter);
+}
+
+static void btc8723b2ant_ignore_wlan_act(struct btc_coexist *btcoexist,
+					 bool force_exec, bool enable)
+{
+	BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE_FW,
+		  "[BTCoex], %s turn Ignore WlanAct %s\n",
+		  (force_exec ? "force to" : ""), (enable ? "ON" : "OFF"));
+	coex_dm->cur_ignore_wlan_act = enable;
+
+	if (!force_exec) {
+		BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE_FW_DETAIL,
+			  "[BTCoex], bPreIgnoreWlanAct = %d, "
+			  "bCurIgnoreWlanAct = %d!!\n",
+			  coex_dm->pre_ignore_wlan_act,
+			  coex_dm->cur_ignore_wlan_act);
+
+		if (coex_dm->pre_ignore_wlan_act ==
+		    coex_dm->cur_ignore_wlan_act)
+			return;
+	}
+	btc8723b2ant_set_fw_ignore_wlan_act(btcoexist, enable);
+
+	coex_dm->pre_ignore_wlan_act = coex_dm->cur_ignore_wlan_act;
+}
+
+static void btc8723b2ant_set_fw_ps_tdma(struct btc_coexist *btcoexist, u8 byte1,
+					u8 byte2, u8 byte3, u8 byte4, u8 byte5)
+{
+	u8 h2c_parameter[5];
+
+	h2c_parameter[0] = byte1;
+	h2c_parameter[1] = byte2;
+	h2c_parameter[2] = byte3;
+	h2c_parameter[3] = byte4;
+	h2c_parameter[4] = byte5;
+
+	coex_dm->ps_tdma_para[0] = byte1;
+	coex_dm->ps_tdma_para[1] = byte2;
+	coex_dm->ps_tdma_para[2] = byte3;
+	coex_dm->ps_tdma_para[3] = byte4;
+	coex_dm->ps_tdma_para[4] = byte5;
+
+	BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE_FW_EXEC,
+		  "[BTCoex], FW write 0x60(5bytes)=0x%x%08x\n",
+		  h2c_parameter[0],
+		  h2c_parameter[1] << 24 | h2c_parameter[2] << 16 |
+		  h2c_parameter[3] << 8 | h2c_parameter[4]);
+
+	btcoexist->btc_fill_h2c(btcoexist, 0x60, 5, h2c_parameter);
+}
+
+static void btc8723b2ant_sw_mechanism1(struct btc_coexist *btcoexist,
+				       bool shrink_rx_lpf, bool low_penalty_ra,
+				       bool limited_dig, bool bt_lna_constrain)
+{
+	btc8723b2ant_rf_shrink(btcoexist, NORMAL_EXEC, shrink_rx_lpf);
+	btc8723b2ant_low_penalty_ra(btcoexist, NORMAL_EXEC, low_penalty_ra);
+}
+
+static void btc8723b2ant_sw_mechanism2(struct btc_coexist *btcoexist,
+				       bool agc_table_shift, bool adc_backoff,
+				       bool sw_dac_swing, u32 dac_swing_lvl)
+{
+	btc8723b2ant_agc_table(btcoexist, NORMAL_EXEC, agc_table_shift);
+	btc8723b2ant_dac_swing(btcoexist, NORMAL_EXEC, sw_dac_swing,
+			       dac_swing_lvl);
+}
+
+static void btc8723b2ant_ps_tdma(struct btc_coexist *btcoexist, bool force_exec,
+			     bool turn_on, u8 type)
+{
+	BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE_FW,
+		  "[BTCoex], %s turn %s PS TDMA, type=%d\n",
+		  (force_exec ? "force to" : ""),
+		  (turn_on ? "ON" : "OFF"), type);
+	coex_dm->cur_ps_tdma_on = turn_on;
+	coex_dm->cur_ps_tdma = type;
+
+	if (!force_exec) {
+		BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE_FW_DETAIL,
+			  "[BTCoex], bPrePsTdmaOn = %d, bCurPsTdmaOn = %d!!\n",
+			  coex_dm->pre_ps_tdma_on, coex_dm->cur_ps_tdma_on);
+		BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE_FW_DETAIL,
+			  "[BTCoex], prePsTdma = %d, curPsTdma = %d!!\n",
+			  coex_dm->pre_ps_tdma, coex_dm->cur_ps_tdma);
+
+		if ((coex_dm->pre_ps_tdma_on == coex_dm->cur_ps_tdma_on) &&
+		    (coex_dm->pre_ps_tdma == coex_dm->cur_ps_tdma))
+			return;
+	}
+	if (turn_on) {
+		switch (type) {
+		case 1:
+		default:
+			btc8723b2ant_set_fw_ps_tdma(btcoexist, 0xe3, 0x1a,
+						    0x1a, 0xe1, 0x90);
+			break;
+		case 2:
+			btc8723b2ant_set_fw_ps_tdma(btcoexist, 0xe3, 0x12,
+						    0x12, 0xe1, 0x90);
+			break;
+		case 3:
+			btc8723b2ant_set_fw_ps_tdma(btcoexist, 0xe3, 0x1c,
+						    0x3, 0xf1, 0x90);
+			break;
+		case 4:
+			btc8723b2ant_set_fw_ps_tdma(btcoexist, 0xe3, 0x10,
+						    0x03, 0xf1, 0x90);
+			break;
+		case 5:
+			btc8723b2ant_set_fw_ps_tdma(btcoexist, 0xe3, 0x1a,
+						    0x1a, 0x60, 0x90);
+			break;
+		case 6:
+			btc8723b2ant_set_fw_ps_tdma(btcoexist, 0xe3, 0x12,
+						    0x12, 0x60, 0x90);
+			break;
+		case 7:
+			btc8723b2ant_set_fw_ps_tdma(btcoexist, 0xe3, 0x1c,
+						    0x3, 0x70, 0x90);
+			break;
+		case 8:
+			btc8723b2ant_set_fw_ps_tdma(btcoexist, 0xa3, 0x10,
+						    0x3, 0x70, 0x90);
+			break;
+		case 9:
+			btc8723b2ant_set_fw_ps_tdma(btcoexist, 0xe3, 0x1a,
+						    0x1a, 0xe1, 0x90);
+			break;
+		case 10:
+			btc8723b2ant_set_fw_ps_tdma(btcoexist, 0xe3, 0x12,
+						    0x12, 0xe1, 0x90);
+			break;
+		case 11:
+			btc8723b2ant_set_fw_ps_tdma(btcoexist, 0xe3, 0xa,
+						    0xa, 0xe1, 0x90);
+			break;
+		case 12:
+			btc8723b2ant_set_fw_ps_tdma(btcoexist, 0xe3, 0x5,
+						    0x5, 0xe1, 0x90);
+			break;
+		case 13:
+			btc8723b2ant_set_fw_ps_tdma(btcoexist, 0xe3, 0x1a,
+						    0x1a, 0x60, 0x90);
+			break;
+		case 14:
+			btc8723b2ant_set_fw_ps_tdma(btcoexist, 0xe3, 0x12,
+						    0x12, 0x60, 0x90);
+			break;
+		case 15:
+			btc8723b2ant_set_fw_ps_tdma(btcoexist, 0xe3, 0xa,
+						    0xa, 0x60, 0x90);
+			break;
+		case 16:
+			btc8723b2ant_set_fw_ps_tdma(btcoexist, 0xe3, 0x5,
+						    0x5, 0x60, 0x90);
+			break;
+		case 17:
+			btc8723b2ant_set_fw_ps_tdma(btcoexist, 0xa3, 0x2f,
+						    0x2f, 0x60, 0x90);
+			break;
+		case 18:
+			btc8723b2ant_set_fw_ps_tdma(btcoexist, 0xe3, 0x5,
+						    0x5, 0xe1, 0x90);
+			break;
+		case 19:
+			btc8723b2ant_set_fw_ps_tdma(btcoexist, 0xe3, 0x25,
+						    0x25, 0xe1, 0x90);
+			break;
+		case 20:
+			btc8723b2ant_set_fw_ps_tdma(btcoexist, 0xe3, 0x25,
+						    0x25, 0x60, 0x90);
+			break;
+		case 21:
+			btc8723b2ant_set_fw_ps_tdma(btcoexist, 0xe3, 0x15,
+						    0x03, 0x70, 0x90);
+			break;
+		case 71:
+			btc8723b2ant_set_fw_ps_tdma(btcoexist, 0xe3, 0x1a,
+						    0x1a, 0xe1, 0x90);
+			break;
+		}
+	} else {
+		/* disable PS tdma */
+		switch (type) {
+		case 0:
+			btc8723b2ant_set_fw_ps_tdma(btcoexist, 0x0, 0x0, 0x0,
+						    0x40, 0x0);
+			break;
+		case 1:
+			btc8723b2ant_set_fw_ps_tdma(btcoexist, 0x0, 0x0, 0x0,
+						    0x48, 0x0);
+			break;
+		default:
+			btc8723b2ant_set_fw_ps_tdma(btcoexist, 0x0, 0x0, 0x0,
+						    0x40, 0x0);
+			break;
+		}
+	}
+
+	/* update pre state */
+	coex_dm->pre_ps_tdma_on = coex_dm->cur_ps_tdma_on;
+	coex_dm->pre_ps_tdma = coex_dm->cur_ps_tdma;
+}
+
+static void btc8723b2ant_coex_alloff(struct btc_coexist *btcoexist)
+{
+	/* fw all off */
+	btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, false, 1);
+	btc8723b2ant_fw_dac_swing_lvl(btcoexist, NORMAL_EXEC, 6);
+	btc8723b2ant_dec_bt_pwr(btcoexist, NORMAL_EXEC, false);
+
+	/* sw all off */
+	btc8723b2ant_sw_mechanism1(btcoexist, false, false, false, false);
+	btc8723b2ant_sw_mechanism2(btcoexist, false, false, false, 0x18);
+
+	/* hw all off */
+	btcoexist->btc_set_rf_reg(btcoexist, BTC_RF_A, 0x1, 0xfffff, 0x0);
+	btc8723b_coex_tbl_type(btcoexist, NORMAL_EXEC, 0);
+}
+
+static void btc8723b2ant_init_coex_dm(struct btc_coexist *btcoexist)
+{
+	/* force to reset coex mechanism*/
+
+	btc8723b2ant_ps_tdma(btcoexist, FORCE_EXEC, false, 1);
+	btc8723b2ant_fw_dac_swing_lvl(btcoexist, FORCE_EXEC, 6);
+	btc8723b2ant_dec_bt_pwr(btcoexist, FORCE_EXEC, false);
+
+	btc8723b2ant_sw_mechanism1(btcoexist, false, false, false, false);
+	btc8723b2ant_sw_mechanism2(btcoexist, false, false, false, 0x18);
+}
+
+static void btc8723b2ant_action_bt_inquiry(struct btc_coexist *btcoexist)
+{
+	bool wifi_connected = false;
+	bool low_pwr_disable = true;
+
+	btcoexist->btc_set(btcoexist, BTC_SET_ACT_DISABLE_LOW_POWER,
+			   &low_pwr_disable);
+	btcoexist->btc_get(btcoexist, BTC_GET_BL_WIFI_CONNECTED,
+			   &wifi_connected);
+
+	if (wifi_connected) {
+		btc8723b_coex_tbl_type(btcoexist, NORMAL_EXEC, 7);
+		btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, true, 3);
+	} else {
+		btc8723b_coex_tbl_type(btcoexist, NORMAL_EXEC, 0);
+		btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, false, 1);
+	}
+	btc8723b2ant_fw_dac_swing_lvl(btcoexist, FORCE_EXEC, 6);
+	btc8723b2ant_dec_bt_pwr(btcoexist, NORMAL_EXEC, false);
+
+	btc8723b2ant_sw_mechanism1(btcoexist, false, false, false, false);
+	btc8723b2ant_sw_mechanism2(btcoexist, false, false, false, 0x18);
+
+	coex_dm->need_recover_0x948 = true;
+	coex_dm->backup_0x948 = btcoexist->btc_read_2byte(btcoexist, 0x948);
+
+	btcoexist->btc_write_2byte(btcoexist, 0x948, 0x280);
+}
+
+static bool btc8723b2ant_is_common_action(struct btc_coexist *btcoexist)
+{
+	bool common = false, wifi_connected = false;
+	bool wifi_busy = false;
+	bool bt_hs_on = false, low_pwr_disable = false;
+
+	btcoexist->btc_get(btcoexist, BTC_GET_BL_HS_OPERATION, &bt_hs_on);
+	btcoexist->btc_get(btcoexist, BTC_GET_BL_WIFI_CONNECTED,
+			   &wifi_connected);
+	btcoexist->btc_get(btcoexist, BTC_GET_BL_WIFI_BUSY, &wifi_busy);
+
+	if (!wifi_connected) {
+		low_pwr_disable = false;
+		btcoexist->btc_set(btcoexist, BTC_SET_ACT_DISABLE_LOW_POWER,
+				   &low_pwr_disable);
+
+		BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+			  "[BTCoex], Wifi non-connected idle!!\n");
+
+		btcoexist->btc_set_rf_reg(btcoexist, BTC_RF_A, 0x1, 0xfffff,
+					  0x0);
+		btc8723b_coex_tbl_type(btcoexist, NORMAL_EXEC, 0);
+		btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, false, 1);
+		btc8723b2ant_fw_dac_swing_lvl(btcoexist, NORMAL_EXEC, 6);
+		btc8723b2ant_dec_bt_pwr(btcoexist, NORMAL_EXEC, false);
+
+		btc8723b2ant_sw_mechanism1(btcoexist, false, false, false,
+					   false);
+		btc8723b2ant_sw_mechanism2(btcoexist, false, false, false,
+					   0x18);
+
+		common = true;
+	} else {
+		if (BT_8723B_2ANT_BT_STATUS_NON_CONNECTED_IDLE ==
+		    coex_dm->bt_status) {
+			low_pwr_disable = false;
+			btcoexist->btc_set(btcoexist,
+					   BTC_SET_ACT_DISABLE_LOW_POWER,
+					   &low_pwr_disable);
+
+			BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+				  "[BTCoex], Wifi connected + "
+				  "BT non connected-idle!!\n");
+
+			btcoexist->btc_set_rf_reg(btcoexist, BTC_RF_A, 0x1,
+						  0xfffff, 0x0);
+			btc8723b_coex_tbl_type(btcoexist, NORMAL_EXEC, 0);
+			btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, false, 1);
+			btc8723b2ant_fw_dac_swing_lvl(btcoexist, NORMAL_EXEC,
+						      0xb);
+			btc8723b2ant_dec_bt_pwr(btcoexist, NORMAL_EXEC,
+						false);
+
+			btc8723b2ant_sw_mechanism1(btcoexist, false, false,
+						   false, false);
+			btc8723b2ant_sw_mechanism2(btcoexist, false, false,
+						   false, 0x18);
+
+			common = true;
+		} else if (BT_8723B_2ANT_BT_STATUS_CONNECTED_IDLE ==
+			   coex_dm->bt_status) {
+			low_pwr_disable = true;
+			btcoexist->btc_set(btcoexist,
+					   BTC_SET_ACT_DISABLE_LOW_POWER,
+					   &low_pwr_disable);
+
+			if (bt_hs_on)
+				return false;
+			BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+				  "[BTCoex], Wifi connected + "
+				  "BT connected-idle!!\n");
+
+			btcoexist->btc_set_rf_reg(btcoexist, BTC_RF_A, 0x1,
+						  0xfffff, 0x0);
+			btc8723b_coex_tbl_type(btcoexist, NORMAL_EXEC, 0);
+			btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, false, 1);
+			btc8723b2ant_fw_dac_swing_lvl(btcoexist, NORMAL_EXEC,
+						      0xb);
+			btc8723b2ant_dec_bt_pwr(btcoexist, NORMAL_EXEC,
+						false);
+
+			btc8723b2ant_sw_mechanism1(btcoexist, true, false,
+						   false, false);
+			btc8723b2ant_sw_mechanism2(btcoexist, false, false,
+						   false, 0x18);
+
+			common = true;
+		} else {
+			low_pwr_disable = true;
+			btcoexist->btc_set(btcoexist,
+					   BTC_SET_ACT_DISABLE_LOW_POWER,
+					   &low_pwr_disable);
+
+			if (wifi_busy) {
+				BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+					  "[BTCoex], Wifi Connected-Busy + "
+					  "BT Busy!!\n");
+				common = false;
+			} else {
+				if (bt_hs_on)
+					return false;
+
+				BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+					  "[BTCoex], Wifi Connected-Idle + "
+					  "BT Busy!!\n");
+
+				btcoexist->btc_set_rf_reg(btcoexist, BTC_RF_A,
+							  0x1, 0xfffff, 0x0);
+				btc8723b_coex_tbl_type(btcoexist, NORMAL_EXEC,
+						       7);
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 21);
+				btc8723b2ant_fw_dac_swing_lvl(btcoexist,
+							      NORMAL_EXEC,
+							      0xb);
+				if (btc8723b_need_dec_pwr(btcoexist))
+					btc8723b2ant_dec_bt_pwr(btcoexist,
+								NORMAL_EXEC,
+								true);
+				else
+					btc8723b2ant_dec_bt_pwr(btcoexist,
+								NORMAL_EXEC,
+								false);
+				btc8723b2ant_sw_mechanism1(btcoexist, false,
+							   false, false,
+							   false);
+				btc8723b2ant_sw_mechanism2(btcoexist, false,
+							   false, false,
+							   0x18);
+				common = true;
+			}
+		}
+	}
+
+	return common;
+}
+
+static void set_tdma_int1(struct btc_coexist *btcoexist, bool tx_pause,
+			  s32 result)
+{
+	/* Set PS TDMA for max interval == 1 */
+	if (tx_pause) {
+		BTC_PRINT(BTC_MSG_ALGORITHM,
+			  ALGO_TRACE_FW_DETAIL,
+			  "[BTCoex], TxPause = 1\n");
+
+		if (coex_dm->cur_ps_tdma == 71) {
+			btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+					     true, 5);
+			coex_dm->tdma_adj_type = 5;
+		} else if (coex_dm->cur_ps_tdma == 1) {
+			btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+					     true, 5);
+			coex_dm->tdma_adj_type = 5;
+		} else if (coex_dm->cur_ps_tdma == 2) {
+			btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+					     true, 6);
+			coex_dm->tdma_adj_type = 6;
+		} else if (coex_dm->cur_ps_tdma == 3) {
+			btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+					     true, 7);
+			coex_dm->tdma_adj_type = 7;
+		} else if (coex_dm->cur_ps_tdma == 4) {
+			btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+					     true, 8);
+			coex_dm->tdma_adj_type = 8;
+		} else if (coex_dm->cur_ps_tdma == 9) {
+			btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+					     true, 13);
+			coex_dm->tdma_adj_type = 13;
+		} else if (coex_dm->cur_ps_tdma == 10) {
+			btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+					     true, 14);
+			coex_dm->tdma_adj_type = 14;
+		} else if (coex_dm->cur_ps_tdma == 11) {
+			btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+					     true, 15);
+			coex_dm->tdma_adj_type = 15;
+		} else if (coex_dm->cur_ps_tdma == 12) {
+			btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+					     true, 16);
+			coex_dm->tdma_adj_type = 16;
+		}
+
+		if (result == -1) {
+			if (coex_dm->cur_ps_tdma == 5) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 6);
+				coex_dm->tdma_adj_type = 6;
+			} else if (coex_dm->cur_ps_tdma == 6) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 7);
+				coex_dm->tdma_adj_type = 7;
+			} else if (coex_dm->cur_ps_tdma == 7) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 8);
+				coex_dm->tdma_adj_type = 8;
+			} else if (coex_dm->cur_ps_tdma == 13) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 14);
+				coex_dm->tdma_adj_type = 14;
+			} else if (coex_dm->cur_ps_tdma == 14) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 15);
+				coex_dm->tdma_adj_type = 15;
+			} else if (coex_dm->cur_ps_tdma == 15) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 16);
+				coex_dm->tdma_adj_type = 16;
+			}
+		}  else if (result == 1) {
+			if (coex_dm->cur_ps_tdma == 8) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 7);
+				coex_dm->tdma_adj_type = 7;
+			} else if (coex_dm->cur_ps_tdma == 7) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 6);
+				coex_dm->tdma_adj_type = 6;
+			} else if (coex_dm->cur_ps_tdma == 6) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 5);
+				coex_dm->tdma_adj_type = 5;
+			} else if (coex_dm->cur_ps_tdma == 16) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 15);
+				coex_dm->tdma_adj_type = 15;
+			} else if (coex_dm->cur_ps_tdma == 15) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 14);
+				coex_dm->tdma_adj_type = 14;
+			} else if (coex_dm->cur_ps_tdma == 14) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 13);
+				coex_dm->tdma_adj_type = 13;
+			}
+		}
+	} else {
+		BTC_PRINT(BTC_MSG_ALGORITHM,
+			  ALGO_TRACE_FW_DETAIL,
+			  "[BTCoex], TxPause = 0\n");
+		if (coex_dm->cur_ps_tdma == 5) {
+			btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, true, 71);
+			coex_dm->tdma_adj_type = 71;
+		} else if (coex_dm->cur_ps_tdma == 6) {
+			btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, true, 2);
+			coex_dm->tdma_adj_type = 2;
+		} else if (coex_dm->cur_ps_tdma == 7) {
+			btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, true, 3);
+			coex_dm->tdma_adj_type = 3;
+		} else if (coex_dm->cur_ps_tdma == 8) {
+			btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, true, 4);
+			coex_dm->tdma_adj_type = 4;
+		} else if (coex_dm->cur_ps_tdma == 13) {
+			btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, true, 9);
+			coex_dm->tdma_adj_type = 9;
+		} else if (coex_dm->cur_ps_tdma == 14) {
+			btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, true, 10);
+			coex_dm->tdma_adj_type = 10;
+		} else if (coex_dm->cur_ps_tdma == 15) {
+			btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, true, 11);
+			coex_dm->tdma_adj_type = 11;
+		} else if (coex_dm->cur_ps_tdma == 16) {
+			btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, true, 12);
+			coex_dm->tdma_adj_type = 12;
+		}
+
+		if (result == -1) {
+			if (coex_dm->cur_ps_tdma == 71) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 1);
+				coex_dm->tdma_adj_type = 1;
+			} else if (coex_dm->cur_ps_tdma == 1) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 2);
+				coex_dm->tdma_adj_type = 2;
+			} else if (coex_dm->cur_ps_tdma == 2) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 3);
+				coex_dm->tdma_adj_type = 3;
+			} else if (coex_dm->cur_ps_tdma == 3) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 4);
+				coex_dm->tdma_adj_type = 4;
+			} else if (coex_dm->cur_ps_tdma == 9) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 10);
+				coex_dm->tdma_adj_type = 10;
+			} else if (coex_dm->cur_ps_tdma == 10) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 11);
+				coex_dm->tdma_adj_type = 11;
+			} else if (coex_dm->cur_ps_tdma == 11) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 12);
+				coex_dm->tdma_adj_type = 12;
+			}
+		}  else if (result == 1) {
+			int tmp = coex_dm->cur_ps_tdma;
+			switch (tmp) {
+			case 4:
+			case 3:
+			case 2:
+			case 12:
+			case 11:
+			case 10:
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, tmp - 1);
+				coex_dm->tdma_adj_type = tmp - 1;
+				break;
+			case 1:
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 71);
+				coex_dm->tdma_adj_type = 71;
+				break;
+			}
+		}
+	}
+}
+
+static void set_tdma_int2(struct btc_coexist *btcoexist, bool tx_pause,
+			  s32 result)
+{
+	/* Set PS TDMA for max interval == 2 */
+	if (tx_pause) {
+		BTC_PRINT(BTC_MSG_ALGORITHM,
+			  ALGO_TRACE_FW_DETAIL,
+			  "[BTCoex], TxPause = 1\n");
+		if (coex_dm->cur_ps_tdma == 1) {
+			btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, true, 6);
+			coex_dm->tdma_adj_type = 6;
+		} else if (coex_dm->cur_ps_tdma == 2) {
+			btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, true, 6);
+			coex_dm->tdma_adj_type = 6;
+		} else if (coex_dm->cur_ps_tdma == 3) {
+			btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, true, 7);
+			coex_dm->tdma_adj_type = 7;
+		} else if (coex_dm->cur_ps_tdma == 4) {
+			btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, true, 8);
+			coex_dm->tdma_adj_type = 8;
+		} else if (coex_dm->cur_ps_tdma == 9) {
+			btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, true, 14);
+			coex_dm->tdma_adj_type = 14;
+		} else if (coex_dm->cur_ps_tdma == 10) {
+			btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, true, 14);
+			coex_dm->tdma_adj_type = 14;
+		} else if (coex_dm->cur_ps_tdma == 11) {
+			btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, true, 15);
+			coex_dm->tdma_adj_type = 15;
+		} else if (coex_dm->cur_ps_tdma == 12) {
+			btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, true, 16);
+			coex_dm->tdma_adj_type = 16;
+		}
+		if (result == -1) {
+			if (coex_dm->cur_ps_tdma == 5) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 6);
+				coex_dm->tdma_adj_type = 6;
+			} else if (coex_dm->cur_ps_tdma == 6) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 7);
+				coex_dm->tdma_adj_type = 7;
+			} else if (coex_dm->cur_ps_tdma == 7) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 8);
+				coex_dm->tdma_adj_type = 8;
+			} else if (coex_dm->cur_ps_tdma == 13) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 14);
+				coex_dm->tdma_adj_type = 14;
+			} else if (coex_dm->cur_ps_tdma == 14) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 15);
+				coex_dm->tdma_adj_type = 15;
+			} else if (coex_dm->cur_ps_tdma == 15) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 16);
+				coex_dm->tdma_adj_type = 16;
+			}
+		}  else if (result == 1) {
+			if (coex_dm->cur_ps_tdma == 8) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 7);
+				coex_dm->tdma_adj_type = 7;
+			} else if (coex_dm->cur_ps_tdma == 7) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 6);
+				coex_dm->tdma_adj_type = 6;
+			} else if (coex_dm->cur_ps_tdma == 6) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 6);
+				coex_dm->tdma_adj_type = 6;
+			} else if (coex_dm->cur_ps_tdma == 16) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 15);
+				coex_dm->tdma_adj_type = 15;
+			} else if (coex_dm->cur_ps_tdma == 15) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 14);
+				coex_dm->tdma_adj_type = 14;
+			} else if (coex_dm->cur_ps_tdma == 14) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 14);
+				coex_dm->tdma_adj_type = 14;
+			}
+		}
+	} else {
+		BTC_PRINT(BTC_MSG_ALGORITHM,
+			  ALGO_TRACE_FW_DETAIL,
+			  "[BTCoex], TxPause = 0\n");
+		if (coex_dm->cur_ps_tdma == 5) {
+			btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, true, 2);
+			coex_dm->tdma_adj_type = 2;
+		} else if (coex_dm->cur_ps_tdma == 6) {
+			btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, true, 2);
+			coex_dm->tdma_adj_type = 2;
+		} else if (coex_dm->cur_ps_tdma == 7) {
+			btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, true, 3);
+			coex_dm->tdma_adj_type = 3;
+		} else if (coex_dm->cur_ps_tdma == 8) {
+			btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, true, 4);
+			coex_dm->tdma_adj_type = 4;
+		} else if (coex_dm->cur_ps_tdma == 13) {
+			btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, true, 10);
+			coex_dm->tdma_adj_type = 10;
+		} else if (coex_dm->cur_ps_tdma == 14) {
+			btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, true, 10);
+			coex_dm->tdma_adj_type = 10;
+		} else if (coex_dm->cur_ps_tdma == 15) {
+			btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, true, 11);
+			coex_dm->tdma_adj_type = 11;
+		} else if (coex_dm->cur_ps_tdma == 16) {
+			btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, true, 12);
+			coex_dm->tdma_adj_type = 12;
+		}
+		if (result == -1) {
+			if (coex_dm->cur_ps_tdma == 1) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 2);
+				coex_dm->tdma_adj_type = 2;
+			} else if (coex_dm->cur_ps_tdma == 2) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 3);
+				coex_dm->tdma_adj_type = 3;
+			} else if (coex_dm->cur_ps_tdma == 3) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 4);
+				coex_dm->tdma_adj_type = 4;
+			} else if (coex_dm->cur_ps_tdma == 9) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 10);
+				coex_dm->tdma_adj_type = 10;
+			} else if (coex_dm->cur_ps_tdma == 10) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 11);
+				coex_dm->tdma_adj_type = 11;
+			} else if (coex_dm->cur_ps_tdma == 11) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 12);
+				coex_dm->tdma_adj_type = 12;
+			}
+		} else if (result == 1) {
+			if (coex_dm->cur_ps_tdma == 4) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 3);
+				coex_dm->tdma_adj_type = 3;
+			} else if (coex_dm->cur_ps_tdma == 3) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 2);
+				coex_dm->tdma_adj_type = 2;
+			} else if (coex_dm->cur_ps_tdma == 2) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 2);
+				coex_dm->tdma_adj_type = 2;
+			} else if (coex_dm->cur_ps_tdma == 12) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 11);
+				coex_dm->tdma_adj_type = 11;
+			} else if (coex_dm->cur_ps_tdma == 11) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 10);
+				coex_dm->tdma_adj_type = 10;
+			} else if (coex_dm->cur_ps_tdma == 10) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 10);
+				coex_dm->tdma_adj_type = 10;
+			}
+		}
+	}
+}
+
+static void set_tdma_int3(struct btc_coexist *btcoexist, bool tx_pause,
+			  s32 result)
+{
+	/* Set PS TDMA for max interval == 3 */
+	if (tx_pause) {
+		BTC_PRINT(BTC_MSG_ALGORITHM,
+			  ALGO_TRACE_FW_DETAIL,
+			  "[BTCoex], TxPause = 1\n");
+		if (coex_dm->cur_ps_tdma == 1) {
+			btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, true, 7);
+			coex_dm->tdma_adj_type = 7;
+		} else if (coex_dm->cur_ps_tdma == 2) {
+			btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, true, 7);
+			coex_dm->tdma_adj_type = 7;
+		} else if (coex_dm->cur_ps_tdma == 3) {
+			btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, true, 7);
+			coex_dm->tdma_adj_type = 7;
+		} else if (coex_dm->cur_ps_tdma == 4) {
+			btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, true, 8);
+			coex_dm->tdma_adj_type = 8;
+		} else if (coex_dm->cur_ps_tdma == 9) {
+			btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, true, 15);
+			coex_dm->tdma_adj_type = 15;
+		} else if (coex_dm->cur_ps_tdma == 10) {
+			btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, true, 15);
+			coex_dm->tdma_adj_type = 15;
+		} else if (coex_dm->cur_ps_tdma == 11) {
+			btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, true, 15);
+			coex_dm->tdma_adj_type = 15;
+		} else if (coex_dm->cur_ps_tdma == 12) {
+			btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, true, 16);
+			coex_dm->tdma_adj_type = 16;
+		}
+		if (result == -1) {
+			if (coex_dm->cur_ps_tdma == 5) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 7);
+				coex_dm->tdma_adj_type = 7;
+			} else if (coex_dm->cur_ps_tdma == 6) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 7);
+				coex_dm->tdma_adj_type = 7;
+			} else if (coex_dm->cur_ps_tdma == 7) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 8);
+				coex_dm->tdma_adj_type = 8;
+			} else if (coex_dm->cur_ps_tdma == 13) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 15);
+				coex_dm->tdma_adj_type = 15;
+			} else if (coex_dm->cur_ps_tdma == 14) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 15);
+				coex_dm->tdma_adj_type = 15;
+			} else if (coex_dm->cur_ps_tdma == 15) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 16);
+				coex_dm->tdma_adj_type = 16;
+			}
+		}  else if (result == 1) {
+			if (coex_dm->cur_ps_tdma == 8) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 7);
+				coex_dm->tdma_adj_type = 7;
+			} else if (coex_dm->cur_ps_tdma == 7) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 7);
+				coex_dm->tdma_adj_type = 7;
+			} else if (coex_dm->cur_ps_tdma == 6) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 7);
+				coex_dm->tdma_adj_type = 7;
+			} else if (coex_dm->cur_ps_tdma == 16) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 15);
+				coex_dm->tdma_adj_type = 15;
+			} else if (coex_dm->cur_ps_tdma == 15) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 15);
+				coex_dm->tdma_adj_type = 15;
+			} else if (coex_dm->cur_ps_tdma == 14) {
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 15);
+				coex_dm->tdma_adj_type = 15;
+			}
+		}
+	} else {
+		BTC_PRINT(BTC_MSG_ALGORITHM,
+			  ALGO_TRACE_FW_DETAIL,
+			  "[BTCoex], TxPause = 0\n");
+		switch (coex_dm->cur_ps_tdma) {
+		case 5:
+			btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, true, 3);
+			coex_dm->tdma_adj_type = 3;
+			break;
+		case 6:
+			btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, true, 3);
+			coex_dm->tdma_adj_type = 3;
+			break;
+		case 7:
+			btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, true, 3);
+			coex_dm->tdma_adj_type = 3;
+			break;
+		case 8:
+			btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, true, 4);
+			coex_dm->tdma_adj_type = 4;
+			break;
+		case 13:
+			btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, true, 11);
+			coex_dm->tdma_adj_type = 11;
+			break;
+		case 14:
+			btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, true, 11);
+			coex_dm->tdma_adj_type = 11;
+			break;
+		case 15:
+			btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, true, 11);
+			coex_dm->tdma_adj_type = 11;
+			break;
+		case 16:
+			btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, true, 12);
+			coex_dm->tdma_adj_type = 12;
+			break;
+		}
+		if (result == -1) {
+			switch (coex_dm->cur_ps_tdma) {
+			case 1:
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 3);
+				coex_dm->tdma_adj_type = 3;
+				break;
+			case 2:
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 3);
+				coex_dm->tdma_adj_type = 3;
+				break;
+			case 3:
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 4);
+				coex_dm->tdma_adj_type = 4;
+				break;
+			case 9:
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 11);
+				coex_dm->tdma_adj_type = 11;
+				break;
+			case 10:
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 11);
+				coex_dm->tdma_adj_type = 11;
+				break;
+			case 11:
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 12);
+				coex_dm->tdma_adj_type = 12;
+				break;
+			}
+		} else if (result == 1) {
+			switch (coex_dm->cur_ps_tdma) {
+			case 4:
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 3);
+				coex_dm->tdma_adj_type = 3;
+				break;
+			case 3:
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 3);
+				coex_dm->tdma_adj_type = 3;
+				break;
+			case 2:
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 3);
+				coex_dm->tdma_adj_type = 3;
+				break;
+			case 12:
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 11);
+				coex_dm->tdma_adj_type = 11;
+				break;
+			case 11:
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 11);
+				coex_dm->tdma_adj_type = 11;
+				break;
+			case 10:
+				btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC,
+						     true, 11);
+				coex_dm->tdma_adj_type = 11;
+			}
+		}
+	}
+}
+
+static void btc8723b2ant_tdma_duration_adjust(struct btc_coexist *btcoexist,
+					  bool sco_hid, bool tx_pause,
+					  u8 max_interval)
+{
+	static s32 up, dn, m, n, wait_count;
+	/*0: no change, +1: increase WiFi duration, -1: decrease WiFi duration*/
+	s32 result;
+	u8 retry_count = 0;
+
+	BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE_FW,
+		  "[BTCoex], TdmaDurationAdjust()\n");
+
+	if (!coex_dm->auto_tdma_adjust) {
+		coex_dm->auto_tdma_adjust = true;
+		BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE_FW_DETAIL,
+			  "[BTCoex], first run TdmaDurationAdjust()!!\n");
+		if (sco_hid) {
+			if (tx_pause) {
+				if (max_interval == 1) {
+					btc8723b2ant_ps_tdma(btcoexist,
+							     NORMAL_EXEC,
+							     true, 13);
+					coex_dm->tdma_adj_type = 13;
+				} else if (max_interval == 2) {
+					btc8723b2ant_ps_tdma(btcoexist,
+							     NORMAL_EXEC,
+							     true, 14);
+					coex_dm->tdma_adj_type = 14;
+				} else if (max_interval == 3) {
+					btc8723b2ant_ps_tdma(btcoexist,
+							     NORMAL_EXEC,
+							     true, 15);
+					coex_dm->tdma_adj_type = 15;
+				} else {
+					btc8723b2ant_ps_tdma(btcoexist,
+							     NORMAL_EXEC,
+							     true, 15);
+					coex_dm->tdma_adj_type = 15;
+				}
+			} else {
+				if (max_interval == 1) {
+					btc8723b2ant_ps_tdma(btcoexist,
+							     NORMAL_EXEC,
+							     true, 9);
+					coex_dm->tdma_adj_type = 9;
+				} else if (max_interval == 2) {
+					btc8723b2ant_ps_tdma(btcoexist,
+							     NORMAL_EXEC,
+							     true, 10);
+					coex_dm->tdma_adj_type = 10;
+				} else if (max_interval == 3) {
+					btc8723b2ant_ps_tdma(btcoexist,
+							     NORMAL_EXEC,
+							     true, 11);
+					coex_dm->tdma_adj_type = 11;
+				} else {
+					btc8723b2ant_ps_tdma(btcoexist,
+							     NORMAL_EXEC,
+							     true, 11);
+					coex_dm->tdma_adj_type = 11;
+				}
+			}
+		} else {
+			if (tx_pause) {
+				if (max_interval == 1) {
+					btc8723b2ant_ps_tdma(btcoexist,
+							     NORMAL_EXEC,
+							     true, 5);
+					coex_dm->tdma_adj_type = 5;
+				} else if (max_interval == 2) {
+					btc8723b2ant_ps_tdma(btcoexist,
+							     NORMAL_EXEC,
+							     true, 6);
+					coex_dm->tdma_adj_type = 6;
+				} else if (max_interval == 3) {
+					btc8723b2ant_ps_tdma(btcoexist,
+							     NORMAL_EXEC,
+							     true, 7);
+					coex_dm->tdma_adj_type = 7;
+				} else {
+					btc8723b2ant_ps_tdma(btcoexist,
+							     NORMAL_EXEC,
+							     true, 7);
+					coex_dm->tdma_adj_type = 7;
+				}
+			} else {
+				if (max_interval == 1) {
+					btc8723b2ant_ps_tdma(btcoexist,
+							     NORMAL_EXEC,
+							     true, 1);
+					coex_dm->tdma_adj_type = 1;
+				} else if (max_interval == 2) {
+					btc8723b2ant_ps_tdma(btcoexist,
+							     NORMAL_EXEC,
+							     true, 2);
+					coex_dm->tdma_adj_type = 2;
+				} else if (max_interval == 3) {
+					btc8723b2ant_ps_tdma(btcoexist,
+							     NORMAL_EXEC,
+							     true, 3);
+					coex_dm->tdma_adj_type = 3;
+				} else {
+					btc8723b2ant_ps_tdma(btcoexist,
+							     NORMAL_EXEC,
+							     true, 3);
+					coex_dm->tdma_adj_type = 3;
+				}
+			}
+		}
+
+		up = 0;
+		dn = 0;
+		m = 1;
+		n = 3;
+		result = 0;
+		wait_count = 0;
+	} else {
+		/*accquire the BT TRx retry count from BT_Info byte2*/
+		retry_count = coex_sta->bt_retry_cnt;
+		BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE_FW_DETAIL,
+			  "[BTCoex], retry_count = %d\n", retry_count);
+		BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE_FW_DETAIL,
+			  "[BTCoex], up=%d, dn=%d, m=%d, n=%d, wait_count=%d\n",
+			  up, dn, m, n, wait_count);
+		result = 0;
+		wait_count++;
+		 /* no retry in the last 2-second duration*/
+		if (retry_count == 0) {
+			up++;
+			dn--;
+
+			if (dn <= 0)
+				dn = 0;
+
+			if (up >= n) {
+				wait_count = 0;
+				n = 3;
+				up = 0;
+				dn = 0;
+				result = 1;
+				BTC_PRINT(BTC_MSG_ALGORITHM,
+					  ALGO_TRACE_FW_DETAIL,
+					  "[BTCoex], Increase wifi "
+					  "duration!!\n");
+			} /* <=3 retry in the last 2-second duration*/
+		} else if (retry_count <= 3) {
+			up--;
+			dn++;
+
+			if (up <= 0)
+				up = 0;
+
+			if (dn == 2) {
+				if (wait_count <= 2)
+					m++;
+				else
+					m = 1;
+
+				if (m >= 20)
+					m = 20;
+
+				n = 3 * m;
+				up = 0;
+				dn = 0;
+				wait_count = 0;
+				result = -1;
+				BTC_PRINT(BTC_MSG_ALGORITHM,
+					  ALGO_TRACE_FW_DETAIL,
+					  "[BTCoex], Decrease wifi duration "
+					  "for retry_counter<3!!\n");
+			}
+		} else {
+			if (wait_count == 1)
+				m++;
+			else
+				m = 1;
+
+			if (m >= 20)
+				m = 20;
+
+			n = 3 * m;
+			up = 0;
+			dn = 0;
+			wait_count = 0;
+			result = -1;
+			BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE_FW_DETAIL,
+				  "[BTCoex], Decrease wifi duration "
+				  "for retry_counter>3!!\n");
+		}
+
+		BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE_FW_DETAIL,
+			  "[BTCoex], max Interval = %d\n", max_interval);
+		if (max_interval == 1)
+			set_tdma_int1(btcoexist, tx_pause, result);
+		else if (max_interval == 2)
+			set_tdma_int2(btcoexist, tx_pause, result);
+		else if (max_interval == 3)
+			set_tdma_int3(btcoexist, tx_pause, result);
+	}
+
+	/*if current PsTdma not match with the recorded one (when scan, dhcp..),
+	 *then we have to adjust it back to the previous recorded one.
+	 */
+	if (coex_dm->cur_ps_tdma != coex_dm->tdma_adj_type) {
+		bool scan = false, link = false, roam = false;
+		BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE_FW_DETAIL,
+			  "[BTCoex], PsTdma type dismatch!!!, "
+			  "curPsTdma=%d, recordPsTdma=%d\n",
+			  coex_dm->cur_ps_tdma, coex_dm->tdma_adj_type);
+
+		btcoexist->btc_get(btcoexist, BTC_GET_BL_WIFI_SCAN, &scan);
+		btcoexist->btc_get(btcoexist, BTC_GET_BL_WIFI_LINK, &link);
+		btcoexist->btc_get(btcoexist, BTC_GET_BL_WIFI_ROAM, &roam);
+
+		if (!scan && !link && !roam)
+			btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, true,
+					     coex_dm->tdma_adj_type);
+		else
+			BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE_FW_DETAIL,
+				  "[BTCoex], roaming/link/scan is under"
+				  " progress, will adjust next time!!!\n");
+	}
+}
+
+/* SCO only or SCO+PAN(HS) */
+static void btc8723b2ant_action_sco(struct btc_coexist *btcoexist)
+{
+	u8 wifi_rssi_state;
+	u32 wifi_bw;
+
+	wifi_rssi_state = btc8723b2ant_wifi_rssi_state(btcoexist,
+						       0, 2, 15, 0);
+
+	btcoexist->btc_set_rf_reg(btcoexist, BTC_RF_A, 0x1, 0xfffff, 0x0);
+
+	btc8723b2ant_fw_dac_swing_lvl(btcoexist, NORMAL_EXEC, 4);
+
+	if (btc8723b_need_dec_pwr(btcoexist))
+		btc8723b2ant_dec_bt_pwr(btcoexist, NORMAL_EXEC, true);
+	else
+		btc8723b2ant_dec_bt_pwr(btcoexist, NORMAL_EXEC, false);
+
+	btcoexist->btc_get(btcoexist, BTC_GET_U4_WIFI_BW, &wifi_bw);
+
+	/*for SCO quality at 11b/g mode*/
+	if (BTC_WIFI_BW_LEGACY == wifi_bw)
+		btc8723b_coex_tbl_type(btcoexist, NORMAL_EXEC, 2);
+	else  /*for SCO quality & wifi performance balance at 11n mode*/
+		btc8723b_coex_tbl_type(btcoexist, NORMAL_EXEC, 8);
+
+	/*for voice quality */
+	btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, false, 0);
+
+	/* sw mechanism */
+	if (BTC_WIFI_BW_HT40 == wifi_bw) {
+		if ((wifi_rssi_state == BTC_RSSI_STATE_HIGH) ||
+		    (wifi_rssi_state == BTC_RSSI_STATE_STAY_HIGH)) {
+			btc8723b2ant_sw_mechanism1(btcoexist, true, true,
+						   false, false);
+			btc8723b2ant_sw_mechanism2(btcoexist, true, false,
+						   true, 0x4);
+		} else {
+			btc8723b2ant_sw_mechanism1(btcoexist, true, true,
+						   false, false);
+			btc8723b2ant_sw_mechanism2(btcoexist, false, false,
+						   true, 0x4);
+		}
+	} else {
+		if ((wifi_rssi_state == BTC_RSSI_STATE_HIGH) ||
+		    (wifi_rssi_state == BTC_RSSI_STATE_STAY_HIGH)) {
+			btc8723b2ant_sw_mechanism1(btcoexist, false, true,
+						   false, false);
+			btc8723b2ant_sw_mechanism2(btcoexist, true, false,
+						   true, 0x4);
+		} else {
+			btc8723b2ant_sw_mechanism1(btcoexist, false, true,
+						   false, false);
+			btc8723b2ant_sw_mechanism2(btcoexist, false, false,
+						   true, 0x4);
+		}
+	}
+}
+
+static void btc8723b2ant_action_hid(struct btc_coexist *btcoexist)
+{
+	u8 wifi_rssi_state, bt_rssi_state;
+	u32 wifi_bw;
+
+	wifi_rssi_state = btc8723b2ant_wifi_rssi_state(btcoexist,
+						       0, 2, 15, 0);
+	bt_rssi_state = btc8723b2ant_bt_rssi_state(2, 35, 0);
+
+	btcoexist->btc_set_rf_reg(btcoexist, BTC_RF_A, 0x1, 0xfffff, 0x0);
+
+	btc8723b2ant_fw_dac_swing_lvl(btcoexist, NORMAL_EXEC, 6);
+
+	if (btc8723b_need_dec_pwr(btcoexist))
+		btc8723b2ant_dec_bt_pwr(btcoexist, NORMAL_EXEC, true);
+	else
+		btc8723b2ant_dec_bt_pwr(btcoexist, NORMAL_EXEC, false);
+
+	btcoexist->btc_get(btcoexist, BTC_GET_U4_WIFI_BW, &wifi_bw);
+
+	if (BTC_WIFI_BW_LEGACY == wifi_bw) /*/for HID at 11b/g mode*/
+		btc8723b_coex_tbl_type(btcoexist, NORMAL_EXEC, 7);
+	else  /*for HID quality & wifi performance balance at 11n mode*/
+		btc8723b_coex_tbl_type(btcoexist, NORMAL_EXEC, 9);
+
+	if ((bt_rssi_state == BTC_RSSI_STATE_HIGH) ||
+	    (bt_rssi_state == BTC_RSSI_STATE_STAY_HIGH))
+		btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, true, 9);
+	else
+		btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, true, 13);
+
+	/* sw mechanism */
+	if (BTC_WIFI_BW_HT40 == wifi_bw) {
+		if ((wifi_rssi_state == BTC_RSSI_STATE_HIGH) ||
+		    (wifi_rssi_state == BTC_RSSI_STATE_STAY_HIGH)) {
+			btc8723b2ant_sw_mechanism1(btcoexist, true, true,
+						   false, false);
+			btc8723b2ant_sw_mechanism2(btcoexist, true, false,
+						   false, 0x18);
+		} else {
+			btc8723b2ant_sw_mechanism1(btcoexist, true, true,
+						   false, false);
+			btc8723b2ant_sw_mechanism2(btcoexist, false, false,
+						   false, 0x18);
+		}
+	} else {
+		if ((wifi_rssi_state == BTC_RSSI_STATE_HIGH) ||
+		    (wifi_rssi_state == BTC_RSSI_STATE_STAY_HIGH)) {
+			btc8723b2ant_sw_mechanism1(btcoexist, false, true,
+						   false, false);
+			btc8723b2ant_sw_mechanism2(btcoexist, true, false,
+						   false, 0x18);
+		} else {
+			btc8723b2ant_sw_mechanism1(btcoexist, false, true,
+						   false, false);
+			btc8723b2ant_sw_mechanism2(btcoexist, false, false,
+						   false, 0x18);
+		}
+	}
+}
+
+/*A2DP only / PAN(EDR) only/ A2DP+PAN(HS)*/
+static void btc8723b2ant_action_a2dp(struct btc_coexist *btcoexist)
+{
+	u8 wifi_rssi_state, bt_rssi_state;
+	u32 wifi_bw;
+
+	wifi_rssi_state = btc8723b2ant_wifi_rssi_state(btcoexist,
+						       0, 2, 15, 0);
+	bt_rssi_state = btc8723b2ant_bt_rssi_state(2, 35, 0);
+
+	btcoexist->btc_set_rf_reg(btcoexist, BTC_RF_A, 0x1, 0xfffff, 0x0);
+
+	btc8723b2ant_fw_dac_swing_lvl(btcoexist, NORMAL_EXEC, 6);
+
+	if (btc8723b_need_dec_pwr(btcoexist))
+		btc8723b2ant_dec_bt_pwr(btcoexist, NORMAL_EXEC, true);
+	else
+		btc8723b2ant_dec_bt_pwr(btcoexist, NORMAL_EXEC, false);
+
+	btc8723b_coex_tbl_type(btcoexist, NORMAL_EXEC, 7);
+
+	if ((bt_rssi_state == BTC_RSSI_STATE_HIGH) ||
+	    (bt_rssi_state == BTC_RSSI_STATE_STAY_HIGH))
+		btc8723b2ant_tdma_duration_adjust(btcoexist, false,
+						  false, 1);
+	else
+		btc8723b2ant_tdma_duration_adjust(btcoexist, false, true, 1);
+
+	/* sw mechanism */
+	btcoexist->btc_get(btcoexist, BTC_GET_U4_WIFI_BW, &wifi_bw);
+	if (BTC_WIFI_BW_HT40 == wifi_bw) {
+		if ((wifi_rssi_state == BTC_RSSI_STATE_HIGH) ||
+		    (wifi_rssi_state == BTC_RSSI_STATE_STAY_HIGH)) {
+			btc8723b2ant_sw_mechanism1(btcoexist, true, false,
+						   false, false);
+			btc8723b2ant_sw_mechanism2(btcoexist, true, false,
+						   false, 0x18);
+		} else {
+			btc8723b2ant_sw_mechanism1(btcoexist, true, false,
+						   false, false);
+			btc8723b2ant_sw_mechanism2(btcoexist, false, false,
+						   false, 0x18);
+		}
+	} else {
+		if ((wifi_rssi_state == BTC_RSSI_STATE_HIGH) ||
+		    (wifi_rssi_state == BTC_RSSI_STATE_STAY_HIGH)) {
+			btc8723b2ant_sw_mechanism1(btcoexist, false, false,
+						   false, false);
+			btc8723b2ant_sw_mechanism2(btcoexist, true, false,
+						   false, 0x18);
+		} else {
+			btc8723b2ant_sw_mechanism1(btcoexist, false, false,
+						   false, false);
+			btc8723b2ant_sw_mechanism2(btcoexist, false, false,
+						   false, 0x18);
+		}
+	}
+}
+
+static void btc8723b2ant_action_a2dp_pan_hs(struct btc_coexist *btcoexist)
+{
+	u8 wifi_rssi_state;
+	u32 wifi_bw;
+
+	wifi_rssi_state = btc8723b2ant_wifi_rssi_state(btcoexist,
+						       0, 2, 15, 0);
+
+	btcoexist->btc_set_rf_reg(btcoexist, BTC_RF_A, 0x1, 0xfffff, 0x0);
+
+	btc8723b2ant_fw_dac_swing_lvl(btcoexist, NORMAL_EXEC, 6);
+
+	if (btc8723b_need_dec_pwr(btcoexist))
+		btc8723b2ant_dec_bt_pwr(btcoexist, NORMAL_EXEC, true);
+	else
+		btc8723b2ant_dec_bt_pwr(btcoexist, NORMAL_EXEC, false);
+
+	btc8723b_coex_tbl_type(btcoexist, NORMAL_EXEC, 7);
+
+	btc8723b2ant_tdma_duration_adjust(btcoexist, false, true, 2);
+
+	/* sw mechanism */
+	btcoexist->btc_get(btcoexist,
+		BTC_GET_U4_WIFI_BW, &wifi_bw);
+	if (BTC_WIFI_BW_HT40 == wifi_bw) {
+		if ((wifi_rssi_state == BTC_RSSI_STATE_HIGH) ||
+		    (wifi_rssi_state == BTC_RSSI_STATE_STAY_HIGH)) {
+			btc8723b2ant_sw_mechanism1(btcoexist, true, false,
+						   false, false);
+			btc8723b2ant_sw_mechanism2(btcoexist, true, false,
+						   false, 0x18);
+		} else {
+			btc8723b2ant_sw_mechanism1(btcoexist, true, false,
+						   false, false);
+			btc8723b2ant_sw_mechanism2(btcoexist, false, false,
+						   false, 0x18);
+		}
+	} else {
+		if ((wifi_rssi_state == BTC_RSSI_STATE_HIGH) ||
+		    (wifi_rssi_state == BTC_RSSI_STATE_STAY_HIGH)) {
+			btc8723b2ant_sw_mechanism1(btcoexist, false, false,
+						   false, false);
+			btc8723b2ant_sw_mechanism2(btcoexist, true, false,
+						   false, 0x18);
+		} else {
+			btc8723b2ant_sw_mechanism1(btcoexist, false, false,
+						   false, false);
+			btc8723b2ant_sw_mechanism2(btcoexist, false, false,
+						   false, 0x18);
+		}
+	}
+}
+
+static void btc8723b2ant_action_pan_edr(struct btc_coexist *btcoexist)
+{
+	u8 wifi_rssi_state, bt_rssi_state;
+	u32 wifi_bw;
+
+	wifi_rssi_state = btc8723b2ant_wifi_rssi_state(btcoexist,
+						       0, 2, 15, 0);
+	bt_rssi_state = btc8723b2ant_bt_rssi_state(2, 35, 0);
+
+	btcoexist->btc_set_rf_reg(btcoexist, BTC_RF_A, 0x1, 0xfffff, 0x0);
+
+	btc8723b2ant_fw_dac_swing_lvl(btcoexist, NORMAL_EXEC, 6);
+
+	if (btc8723b_need_dec_pwr(btcoexist))
+		btc8723b2ant_dec_bt_pwr(btcoexist, NORMAL_EXEC, true);
+	else
+		btc8723b2ant_dec_bt_pwr(btcoexist, NORMAL_EXEC, false);
+
+	btc8723b_coex_tbl_type(btcoexist, NORMAL_EXEC, 10);
+
+	if ((bt_rssi_state == BTC_RSSI_STATE_HIGH) ||
+	    (bt_rssi_state == BTC_RSSI_STATE_STAY_HIGH))
+		btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, true, 1);
+	else
+		btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, true, 5);
+
+	/* sw mechanism */
+	btcoexist->btc_get(btcoexist, BTC_GET_U4_WIFI_BW, &wifi_bw);
+	if (BTC_WIFI_BW_HT40 == wifi_bw) {
+		if ((wifi_rssi_state == BTC_RSSI_STATE_HIGH) ||
+		    (wifi_rssi_state == BTC_RSSI_STATE_STAY_HIGH)) {
+			btc8723b2ant_sw_mechanism1(btcoexist, true, false,
+						   false, false);
+			btc8723b2ant_sw_mechanism2(btcoexist, true, false,
+						   false, 0x18);
+		} else {
+			btc8723b2ant_sw_mechanism1(btcoexist, true, false,
+						   false, false);
+			btc8723b2ant_sw_mechanism2(btcoexist, false, false,
+						   false, 0x18);
+		}
+	} else {
+		if ((wifi_rssi_state == BTC_RSSI_STATE_HIGH) ||
+		    (wifi_rssi_state == BTC_RSSI_STATE_STAY_HIGH)) {
+			btc8723b2ant_sw_mechanism1(btcoexist, false, false,
+						   false, false);
+			btc8723b2ant_sw_mechanism2(btcoexist, true, false,
+						   false, 0x18);
+		} else {
+			btc8723b2ant_sw_mechanism1(btcoexist, false, false,
+						   false, false);
+			btc8723b2ant_sw_mechanism2(btcoexist, false, false,
+						   false, 0x18);
+		}
+	}
+}
+
+/*PAN(HS) only*/
+static void btc8723b2ant_action_pan_hs(struct btc_coexist *btcoexist)
+{
+	u8 wifi_rssi_state;
+	u32 wifi_bw;
+
+	wifi_rssi_state = btc8723b2ant_wifi_rssi_state(btcoexist,
+						       0, 2, 15, 0);
+
+	btcoexist->btc_set_rf_reg(btcoexist, BTC_RF_A, 0x1, 0xfffff, 0x0);
+
+	btc8723b2ant_fw_dac_swing_lvl(btcoexist, NORMAL_EXEC, 6);
+
+	if ((wifi_rssi_state == BTC_RSSI_STATE_HIGH) ||
+	    (wifi_rssi_state == BTC_RSSI_STATE_STAY_HIGH))
+		btc8723b2ant_dec_bt_pwr(btcoexist, NORMAL_EXEC, true);
+	else
+		btc8723b2ant_dec_bt_pwr(btcoexist, NORMAL_EXEC, false);
+
+	btc8723b_coex_tbl_type(btcoexist, NORMAL_EXEC, 7);
+
+	btc8723b2ant_ps_tdma(btcoexist, NORMAL_EXEC, false, 1);
+
+	btcoexist->btc_get(btcoexist, BTC_GET_U4_WIFI_BW, &wifi_bw);
+	if (BTC_WIFI_BW_HT40 == wifi_bw) {
+		if ((wifi_rssi_state == BTC_RSSI_STATE_HIGH) ||
+		    (wifi_rssi_state == BTC_RSSI_STATE_STAY_HIGH)) {
+			btc8723b2ant_sw_mechanism1(btcoexist, true, false,
+						   false, false);
+			btc8723b2ant_sw_mechanism2(btcoexist, true, false,
+						   false, 0x18);
+		} else {
+			btc8723b2ant_sw_mechanism1(btcoexist, true, false,
+						   false, false);
+			btc8723b2ant_sw_mechanism2(btcoexist, false, false,
+						   false, 0x18);
+		}
+	} else {
+		if ((wifi_rssi_state == BTC_RSSI_STATE_HIGH) ||
+		    (wifi_rssi_state == BTC_RSSI_STATE_STAY_HIGH)) {
+			btc8723b2ant_sw_mechanism1(btcoexist, false, false,
+						   false, false);
+			btc8723b2ant_sw_mechanism2(btcoexist, true, false,
+						   false, 0x18);
+		} else {
+			btc8723b2ant_sw_mechanism1(btcoexist, false, false,
+						   false, false);
+			btc8723b2ant_sw_mechanism2(btcoexist, false, false,
+						   false, 0x18);
+		}
+	}
+}
+
+/*PAN(EDR)+A2DP*/
+static void btc8723b2ant_action_pan_edr_a2dp(struct btc_coexist *btcoexist)
+{
+	u8 wifi_rssi_state, bt_rssi_state;
+	u32 wifi_bw;
+
+	wifi_rssi_state = btc8723b2ant_wifi_rssi_state(btcoexist,
+						       0, 2, 15, 0);
+	bt_rssi_state = btc8723b2ant_bt_rssi_state(2, 35, 0);
+
+	btcoexist->btc_set_rf_reg(btcoexist, BTC_RF_A, 0x1, 0xfffff, 0x0);
+
+	btc8723b2ant_fw_dac_swing_lvl(btcoexist, NORMAL_EXEC, 6);
+
+	if (btc8723b_need_dec_pwr(btcoexist))
+		btc8723b2ant_dec_bt_pwr(btcoexist, NORMAL_EXEC, true);
+	else
+		btc8723b2ant_dec_bt_pwr(btcoexist, NORMAL_EXEC, false);
+
+	btcoexist->btc_get(btcoexist, BTC_GET_U4_WIFI_BW, &wifi_bw);
+
+	if ((bt_rssi_state == BTC_RSSI_STATE_HIGH) ||
+	    (bt_rssi_state == BTC_RSSI_STATE_STAY_HIGH)) {
+		btc8723b_coex_tbl_type(btcoexist, NORMAL_EXEC, 12);
+		if (BTC_WIFI_BW_HT40 == wifi_bw)
+			btc8723b2ant_tdma_duration_adjust(btcoexist, false,
+							  true, 3);
+		else
+			btc8723b2ant_tdma_duration_adjust(btcoexist, false,
+							  false, 3);
+	} else {
+		btc8723b_coex_tbl_type(btcoexist, NORMAL_EXEC, 7);
+		btc8723b2ant_tdma_duration_adjust(btcoexist, false, true, 3);
+	}
+
+	/* sw mechanism	*/
+	if (BTC_WIFI_BW_HT40 == wifi_bw) {
+		if ((wifi_rssi_state == BTC_RSSI_STATE_HIGH) ||
+		    (wifi_rssi_state == BTC_RSSI_STATE_STAY_HIGH)) {
+			btc8723b2ant_sw_mechanism1(btcoexist, true, false,
+						   false, false);
+			btc8723b2ant_sw_mechanism2(btcoexist, true, false,
+						   false, 0x18);
+		} else {
+			btc8723b2ant_sw_mechanism1(btcoexist, true, false,
+						   false, false);
+			btc8723b2ant_sw_mechanism2(btcoexist, false, false,
+						   false, 0x18);
+		}
+	} else {
+		if ((wifi_rssi_state == BTC_RSSI_STATE_HIGH) ||
+		    (wifi_rssi_state == BTC_RSSI_STATE_STAY_HIGH)) {
+			btc8723b2ant_sw_mechanism1(btcoexist, false, false,
+						   false, false);
+			btc8723b2ant_sw_mechanism2(btcoexist, true, false,
+						   false, 0x18);
+		} else {
+			btc8723b2ant_sw_mechanism1(btcoexist, false, false,
+						   false, false);
+			btc8723b2ant_sw_mechanism2(btcoexist, false, false,
+						   false, 0x18);
+		}
+	}
+}
+
+static void btc8723b2ant_action_pan_edr_hid(struct btc_coexist *btcoexist)
+{
+	u8 wifi_rssi_state, bt_rssi_state;
+	u32 wifi_bw;
+
+	wifi_rssi_state = btc8723b2ant_wifi_rssi_state(btcoexist,
+						       0, 2, 15, 0);
+	bt_rssi_state = btc8723b2ant_bt_rssi_state(2, 35, 0);
+	btcoexist->btc_get(btcoexist, BTC_GET_U4_WIFI_BW, &wifi_bw);
+
+	if (btc8723b_need_dec_pwr(btcoexist))
+		btc8723b2ant_dec_bt_pwr(btcoexist, NORMAL_EXEC, true);
+	else
+		btc8723b2ant_dec_bt_pwr(btcoexist, NORMAL_EXEC, false);
+
+	if ((bt_rssi_state == BTC_RSSI_STATE_HIGH) ||
+	    (bt_rssi_state == BTC_RSSI_STATE_STAY_HIGH)) {
+		if (BTC_WIFI_BW_HT40 == wifi_bw) {
+			btc8723b2ant_fw_dac_swing_lvl(btcoexist, NORMAL_EXEC,
+						      3);
+			btc8723b_coex_tbl_type(btcoexist, NORMAL_EXEC, 11);
+			btcoexist->btc_set_rf_reg(btcoexist, BTC_RF_A, 0x1,
+						  0xfffff, 0x780);
+		} else {
+			btc8723b2ant_fw_dac_swing_lvl(btcoexist, NORMAL_EXEC,
+						      6);
+			btc8723b_coex_tbl_type(btcoexist, NORMAL_EXEC, 7);
+			btcoexist->btc_set_rf_reg(btcoexist, BTC_RF_A, 0x1,
+						  0xfffff, 0x0);
+		}
+		btc8723b2ant_tdma_duration_adjust(btcoexist, true, false, 2);
+	} else {
+		btc8723b2ant_fw_dac_swing_lvl(btcoexist, NORMAL_EXEC, 6);
+		btc8723b_coex_tbl_type(btcoexist, NORMAL_EXEC, 11);
+		btcoexist->btc_set_rf_reg(btcoexist, BTC_RF_A, 0x1, 0xfffff,
+					  0x0);
+		btc8723b2ant_tdma_duration_adjust(btcoexist, true, true, 2);
+	}
+
+	/* sw mechanism */
+	if (BTC_WIFI_BW_HT40 == wifi_bw) {
+		if ((wifi_rssi_state == BTC_RSSI_STATE_HIGH) ||
+		    (wifi_rssi_state == BTC_RSSI_STATE_STAY_HIGH)) {
+			btc8723b2ant_sw_mechanism1(btcoexist, true, true,
+						   false, false);
+			btc8723b2ant_sw_mechanism2(btcoexist, true, false,
+						   false, 0x18);
+		} else {
+			btc8723b2ant_sw_mechanism1(btcoexist, true, true,
+						   false, false);
+			btc8723b2ant_sw_mechanism2(btcoexist, false, false,
+						   false, 0x18);
+		}
+	} else {
+		if ((wifi_rssi_state == BTC_RSSI_STATE_HIGH) ||
+		    (wifi_rssi_state == BTC_RSSI_STATE_STAY_HIGH)) {
+			btc8723b2ant_sw_mechanism1(btcoexist, false, true,
+						   false, false);
+			btc8723b2ant_sw_mechanism2(btcoexist, true, false,
+						   false, 0x18);
+		} else {
+			btc8723b2ant_sw_mechanism1(btcoexist, false, true,
+						   false, false);
+			btc8723b2ant_sw_mechanism2(btcoexist, false, false,
+						   false, 0x18);
+		}
+	}
+}
+
+/* HID+A2DP+PAN(EDR) */
+static void btc8723b2ant_action_hid_a2dp_pan_edr(struct btc_coexist *btcoexist)
+{
+	u8 wifi_rssi_state, bt_rssi_state;
+	u32 wifi_bw;
+
+	wifi_rssi_state = btc8723b2ant_wifi_rssi_state(btcoexist,
+						       0, 2, 15, 0);
+	bt_rssi_state = btc8723b2ant_bt_rssi_state(2, 35, 0);
+
+	btcoexist->btc_set_rf_reg(btcoexist, BTC_RF_A, 0x1, 0xfffff, 0x0);
+
+	btc8723b2ant_fw_dac_swing_lvl(btcoexist, NORMAL_EXEC, 6);
+
+	if (btc8723b_need_dec_pwr(btcoexist))
+		btc8723b2ant_dec_bt_pwr(btcoexist, NORMAL_EXEC, true);
+	else
+		btc8723b2ant_dec_bt_pwr(btcoexist, NORMAL_EXEC, false);
+
+	btcoexist->btc_get(btcoexist, BTC_GET_U4_WIFI_BW, &wifi_bw);
+
+	btc8723b_coex_tbl_type(btcoexist, NORMAL_EXEC, 7);
+
+	if ((bt_rssi_state == BTC_RSSI_STATE_HIGH) ||
+	    (bt_rssi_state == BTC_RSSI_STATE_STAY_HIGH)) {
+		if (BTC_WIFI_BW_HT40 == wifi_bw)
+			btc8723b2ant_tdma_duration_adjust(btcoexist, true,
+							  true, 2);
+		else
+			btc8723b2ant_tdma_duration_adjust(btcoexist, true,
+							  false, 3);
+	} else {
+		btc8723b2ant_tdma_duration_adjust(btcoexist, true, true, 3);
+	}
+
+	/* sw mechanism */
+	if (BTC_WIFI_BW_HT40 == wifi_bw) {
+		if ((wifi_rssi_state == BTC_RSSI_STATE_HIGH) ||
+		    (wifi_rssi_state == BTC_RSSI_STATE_STAY_HIGH)) {
+			btc8723b2ant_sw_mechanism1(btcoexist, true, true,
+						   false, false);
+			btc8723b2ant_sw_mechanism2(btcoexist, true, false,
+						   false, 0x18);
+		} else {
+			btc8723b2ant_sw_mechanism1(btcoexist, true, true,
+						   false, false);
+			btc8723b2ant_sw_mechanism2(btcoexist, false, false,
+						   false, 0x18);
+		}
+	} else {
+		if ((wifi_rssi_state == BTC_RSSI_STATE_HIGH) ||
+		    (wifi_rssi_state == BTC_RSSI_STATE_STAY_HIGH)) {
+			btc8723b2ant_sw_mechanism1(btcoexist, false, true,
+						   false, false);
+			btc8723b2ant_sw_mechanism2(btcoexist, true, false,
+						   false, 0x18);
+		} else {
+			btc8723b2ant_sw_mechanism1(btcoexist, false, true,
+						   false, false);
+			btc8723b2ant_sw_mechanism2(btcoexist, false, false,
+						   false, 0x18);
+		}
+	}
+}
+
+static void btc8723b2ant_action_hid_a2dp(struct btc_coexist *btcoexist)
+{
+	u8 wifi_rssi_state, bt_rssi_state;
+	u32 wifi_bw;
+
+	wifi_rssi_state = btc8723b2ant_wifi_rssi_state(btcoexist,
+							  0, 2, 15, 0);
+	bt_rssi_state = btc8723b2ant_bt_rssi_state(2, 35, 0);
+
+	btcoexist->btc_set_rf_reg(btcoexist, BTC_RF_A, 0x1, 0xfffff, 0x0);
+
+	btc8723b2ant_fw_dac_swing_lvl(btcoexist, NORMAL_EXEC, 6);
+
+	if (btc8723b_need_dec_pwr(btcoexist))
+		btc8723b2ant_dec_bt_pwr(btcoexist, NORMAL_EXEC, true);
+	else
+		btc8723b2ant_dec_bt_pwr(btcoexist, NORMAL_EXEC, false);
+
+	btcoexist->btc_get(btcoexist, BTC_GET_U4_WIFI_BW, &wifi_bw);
+
+	btc8723b_coex_tbl_type(btcoexist, NORMAL_EXEC, 7);
+
+	if ((bt_rssi_state == BTC_RSSI_STATE_HIGH) ||
+	    (bt_rssi_state == BTC_RSSI_STATE_STAY_HIGH))
+		btc8723b2ant_tdma_duration_adjust(btcoexist, true, false, 2);
+	else
+		btc8723b2ant_tdma_duration_adjust(btcoexist, true, true, 2);
+
+	/* sw mechanism */
+	if (BTC_WIFI_BW_HT40 == wifi_bw) {
+		if ((wifi_rssi_state == BTC_RSSI_STATE_HIGH) ||
+		    (wifi_rssi_state == BTC_RSSI_STATE_STAY_HIGH)) {
+			btc8723b2ant_sw_mechanism1(btcoexist, true, true,
+						   false, false);
+			btc8723b2ant_sw_mechanism2(btcoexist, true, false,
+						   false, 0x18);
+		} else {
+			btc8723b2ant_sw_mechanism1(btcoexist, true, true,
+						   false, false);
+			btc8723b2ant_sw_mechanism2(btcoexist, false, false,
+						   false, 0x18);
+		}
+	} else {
+		if ((wifi_rssi_state == BTC_RSSI_STATE_HIGH) ||
+		    (wifi_rssi_state == BTC_RSSI_STATE_STAY_HIGH)) {
+			btc8723b2ant_sw_mechanism1(btcoexist, false, true,
+						   false, false);
+			btc8723b2ant_sw_mechanism2(btcoexist, true, false,
+						   false, 0x18);
+		} else {
+			btc8723b2ant_sw_mechanism1(btcoexist, false, true,
+						   false, false);
+			btc8723b2ant_sw_mechanism2(btcoexist, false, false,
+						   false, 0x18);
+		}
+	}
+}
+
+static void btc8723b2ant_run_coexist_mechanism(struct btc_coexist *btcoexist)
+{
+	u8 algorithm = 0;
+
+	BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+		  "[BTCoex], RunCoexistMechanism()===>\n");
+
+	if (btcoexist->manual_control) {
+		BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+			  "[BTCoex], RunCoexistMechanism(), "
+			  "return for Manual CTRL <===\n");
+		return;
+	}
+
+	if (coex_sta->under_ips) {
+		BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+			  "[BTCoex], wifi is under IPS !!!\n");
+		return;
+	}
+
+	algorithm = btc8723b2ant_action_algorithm(btcoexist);
+	if (coex_sta->c2h_bt_inquiry_page &&
+	    (BT_8723B_2ANT_COEX_ALGO_PANHS != algorithm)) {
+		BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+			  "[BTCoex], BT is under inquiry/page scan !!\n");
+		btc8723b2ant_action_bt_inquiry(btcoexist);
+		return;
+	} else {
+		if (coex_dm->need_recover_0x948) {
+			coex_dm->need_recover_0x948 = false;
+			btcoexist->btc_write_2byte(btcoexist, 0x948,
+						   coex_dm->backup_0x948);
+		}
+	}
+
+	coex_dm->cur_algorithm = algorithm;
+	BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE, "[BTCoex], Algorithm = %d\n",
+		  coex_dm->cur_algorithm);
+
+	if (btc8723b2ant_is_common_action(btcoexist)) {
+		BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+			  "[BTCoex], Action 2-Ant common.\n");
+		coex_dm->auto_tdma_adjust = false;
+	} else {
+		if (coex_dm->cur_algorithm != coex_dm->pre_algorithm) {
+			BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+				  "[BTCoex], preAlgorithm=%d, "
+				  "curAlgorithm=%d\n", coex_dm->pre_algorithm,
+				  coex_dm->cur_algorithm);
+			coex_dm->auto_tdma_adjust = false;
+		}
+		switch (coex_dm->cur_algorithm) {
+		case BT_8723B_2ANT_COEX_ALGO_SCO:
+			BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+				  "[BTCoex], Action 2-Ant, algorithm = SCO.\n");
+			btc8723b2ant_action_sco(btcoexist);
+			break;
+		case BT_8723B_2ANT_COEX_ALGO_HID:
+			BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+				  "[BTCoex], Action 2-Ant, algorithm = HID.\n");
+			btc8723b2ant_action_hid(btcoexist);
+			break;
+		case BT_8723B_2ANT_COEX_ALGO_A2DP:
+			BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+				  "[BTCoex], Action 2-Ant, "
+				  "algorithm = A2DP.\n");
+			btc8723b2ant_action_a2dp(btcoexist);
+			break;
+		case BT_8723B_2ANT_COEX_ALGO_A2DP_PANHS:
+			BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+				  "[BTCoex], Action 2-Ant, "
+				  "algorithm = A2DP+PAN(HS).\n");
+			btc8723b2ant_action_a2dp_pan_hs(btcoexist);
+			break;
+		case BT_8723B_2ANT_COEX_ALGO_PANEDR:
+			BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+				  "[BTCoex], Action 2-Ant, "
+				  "algorithm = PAN(EDR).\n");
+			btc8723b2ant_action_pan_edr(btcoexist);
+			break;
+		case BT_8723B_2ANT_COEX_ALGO_PANHS:
+			BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+				  "[BTCoex], Action 2-Ant, "
+				  "algorithm = HS mode.\n");
+			btc8723b2ant_action_pan_hs(btcoexist);
+				break;
+		case BT_8723B_2ANT_COEX_ALGO_PANEDR_A2DP:
+			BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+				  "[BTCoex], Action 2-Ant, "
+				  "algorithm = PAN+A2DP.\n");
+			btc8723b2ant_action_pan_edr_a2dp(btcoexist);
+			break;
+		case BT_8723B_2ANT_COEX_ALGO_PANEDR_HID:
+			BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+				  "[BTCoex], Action 2-Ant, "
+				  "algorithm = PAN(EDR)+HID.\n");
+			btc8723b2ant_action_pan_edr_hid(btcoexist);
+			break;
+		case BT_8723B_2ANT_COEX_ALGO_HID_A2DP_PANEDR:
+			BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+				  "[BTCoex], Action 2-Ant, "
+				  "algorithm = HID+A2DP+PAN.\n");
+			btc8723b2ant_action_hid_a2dp_pan_edr(btcoexist);
+			break;
+		case BT_8723B_2ANT_COEX_ALGO_HID_A2DP:
+			BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+				  "[BTCoex], Action 2-Ant, "
+				  "algorithm = HID+A2DP.\n");
+			btc8723b2ant_action_hid_a2dp(btcoexist);
+			break;
+		default:
+			BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+				  "[BTCoex], Action 2-Ant, "
+				  "algorithm = coexist All Off!!\n");
+			btc8723b2ant_coex_alloff(btcoexist);
+			break;
+		}
+		coex_dm->pre_algorithm = coex_dm->cur_algorithm;
+	}
+}
+
+
+
+/*********************************************************************
+ *  work around function start with wa_btc8723b2ant_
+ *********************************************************************/
+/*********************************************************************
+ *  extern function start with EXbtc8723b2ant_
+ *********************************************************************/
+void ex_halbtc8723b2ant_init_hwconfig(struct btc_coexist *btcoexist)
+{
+	struct btc_board_info *board_info = &btcoexist->board_info;
+	u32 u32tmp = 0, fw_ver;
+	u8 u8tmp = 0;
+	u8 h2c_parameter[2] = {0};
+
+
+	BTC_PRINT(BTC_MSG_INTERFACE, INTF_INIT,
+		  "[BTCoex], 2Ant Init HW Config!!\n");
+
+	/* backup rf 0x1e value */
+	coex_dm->bt_rf0x1e_backup = btcoexist->btc_get_rf_reg(btcoexist,
+							      BTC_RF_A, 0x1e,
+							      0xfffff);
+
+	/* 0x4c[23]=0, 0x4c[24]=1  Antenna control by WL/BT */
+	u32tmp = btcoexist->btc_read_4byte(btcoexist, 0x4c);
+	u32tmp &= ~BIT23;
+	u32tmp |= BIT24;
+	btcoexist->btc_write_4byte(btcoexist, 0x4c, u32tmp);
+
+	btcoexist->btc_write_1byte(btcoexist, 0x974, 0xff);
+	btcoexist->btc_write_1byte_bitmask(btcoexist, 0x944, 0x3, 0x3);
+	btcoexist->btc_write_1byte(btcoexist, 0x930, 0x77);
+	btcoexist->btc_write_1byte_bitmask(btcoexist, 0x67, 0x20, 0x1);
+
+	/* Antenna switch control parameter */
+	/* btcoexist->btc_write_4byte(btcoexist, 0x858, 0x55555555);*/
+
+	/*Force GNT_BT to low*/
+	btcoexist->btc_write_1byte_bitmask(btcoexist, 0x765, 0x18, 0x0);
+	btcoexist->btc_write_2byte(btcoexist, 0x948, 0x0);
+
+	/* 0x790[5:0]=0x5 */
+	u8tmp = btcoexist->btc_read_1byte(btcoexist, 0x790);
+	u8tmp &= 0xc0;
+	u8tmp |= 0x5;
+	btcoexist->btc_write_1byte(btcoexist, 0x790, u8tmp);
+
+
+	/*Antenna config	*/
+	btcoexist->btc_get(btcoexist, BTC_GET_U4_WIFI_FW_VER, &fw_ver);
+
+ /*ext switch for fw ver < 0xc */
+	if (fw_ver < 0xc00) {
+		if (board_info->btdm_ant_pos == BTC_ANTENNA_AT_MAIN_PORT) {
+			btcoexist->btc_write_1byte_bitmask(btcoexist, 0x92c,
+							   0x3, 0x1);
+			/*Main Ant to  BT for IPS case 0x4c[23]=1*/
+			btcoexist->btc_write_1byte_bitmask(btcoexist, 0x64, 0x1,
+							   0x1);
+
+			/*tell firmware "no antenna inverse"*/
+			h2c_parameter[0] = 0;
+			h2c_parameter[1] = 1;  /* ext switch type */
+			btcoexist->btc_fill_h2c(btcoexist, 0x65, 2,
+						h2c_parameter);
+		} else {
+			btcoexist->btc_write_1byte_bitmask(btcoexist, 0x92c,
+							   0x3, 0x2);
+			/*Aux Ant to  BT for IPS case 0x4c[23]=1*/
+			btcoexist->btc_write_1byte_bitmask(btcoexist, 0x64, 0x1,
+							   0x0);
+
+			/*tell firmware "antenna inverse"*/
+			h2c_parameter[0] = 1;
+			h2c_parameter[1] = 1;  /*ext switch type*/
+			btcoexist->btc_fill_h2c(btcoexist, 0x65, 2,
+						h2c_parameter);
+		}
+	} else {
+		/*ext switch always at s1 (if exist) */
+		btcoexist->btc_write_1byte_bitmask(btcoexist, 0x92c, 0x3, 0x1);
+		/*Main Ant to  BT for IPS case 0x4c[23]=1*/
+		btcoexist->btc_write_1byte_bitmask(btcoexist, 0x64, 0x1, 0x1);
+
+		if (board_info->btdm_ant_pos == BTC_ANTENNA_AT_MAIN_PORT) {
+			/*tell firmware "no antenna inverse"*/
+			h2c_parameter[0] = 0;
+			h2c_parameter[1] = 0;  /*ext switch type*/
+			btcoexist->btc_fill_h2c(btcoexist, 0x65, 2,
+						h2c_parameter);
+		} else {
+			/*tell firmware "antenna inverse"*/
+			h2c_parameter[0] = 1;
+			h2c_parameter[1] = 0;  /*ext switch type*/
+			btcoexist->btc_fill_h2c(btcoexist, 0x65, 2,
+						h2c_parameter);
+		}
+	}
+
+	/* PTA parameter */
+	btc8723b_coex_tbl_type(btcoexist, FORCE_EXEC, 0);
+
+	/* Enable counter statistics */
+	/*0x76e[3] =1, WLAN_Act control by PTA*/
+	btcoexist->btc_write_1byte(btcoexist, 0x76e, 0xc);
+	btcoexist->btc_write_1byte(btcoexist, 0x778, 0x3);
+	btcoexist->btc_write_1byte_bitmask(btcoexist, 0x40, 0x20, 0x1);
+}
+
+void ex_halbtc8723b2ant_init_coex_dm(struct btc_coexist *btcoexist)
+{
+	BTC_PRINT(BTC_MSG_INTERFACE, INTF_INIT,
+		  "[BTCoex], Coex Mechanism Init!!\n");
+	btc8723b2ant_init_coex_dm(btcoexist);
+}
+
+void ex_halbtc8723b2ant_display_coex_info(struct btc_coexist *btcoexist)
+{
+	struct btc_board_info *board_info = &btcoexist->board_info;
+	struct btc_stack_info *stack_info = &btcoexist->stack_info;
+	struct btc_bt_link_info *bt_link_info = &btcoexist->bt_link_info;
+	u8 *cli_buf = btcoexist->cli_buf;
+	u8 u8tmp[4], i, bt_info_ext, ps_tdma_case = 0;
+	u32 u32tmp[4];
+	bool roam = false, scan = false;
+	bool link = false, wifi_under_5g = false;
+	bool bt_hs_on = false, wifi_busy = false;
+	s32 wifi_rssi = 0, bt_hs_rssi = 0;
+	u32 wifi_bw, wifi_traffic_dir, fa_ofdm, fa_cck;
+	u8 wifi_dot11_chnl, wifi_hs_chnl;
+	u32 fw_ver = 0, bt_patch_ver = 0;
+
+	CL_SPRINTF(cli_buf, BT_TMP_BUF_SIZE,
+		   "\r\n ============[BT Coexist info]============");
+	CL_PRINTF(cli_buf);
+
+	if (btcoexist->manual_control) {
+		CL_SPRINTF(cli_buf, BT_TMP_BUF_SIZE,
+			   "\r\n ==========[Under Manual Control]============");
+		CL_PRINTF(cli_buf);
+		CL_SPRINTF(cli_buf, BT_TMP_BUF_SIZE,
+			   "\r\n ==========================================");
+		CL_PRINTF(cli_buf);
+	}
+
+	if (!board_info->bt_exist) {
+		CL_SPRINTF(cli_buf, BT_TMP_BUF_SIZE, "\r\n BT not exists !!!");
+		CL_PRINTF(cli_buf);
+		return;
+	}
+
+	CL_SPRINTF(cli_buf, BT_TMP_BUF_SIZE, "\r\n %-35s = %d/ %d ",
+		   "Ant PG number/ Ant mechanism:",
+		   board_info->pg_ant_num, board_info->btdm_ant_num);
+	CL_PRINTF(cli_buf);
+
+	CL_SPRINTF(cli_buf, BT_TMP_BUF_SIZE, "\r\n %-35s = %s / %d",
+		   "BT stack/ hci ext ver",
+		   ((stack_info->profile_notified) ? "Yes" : "No"),
+		   stack_info->hci_version);
+	CL_PRINTF(cli_buf);
+
+	btcoexist->btc_get(btcoexist, BTC_GET_U4_BT_PATCH_VER, &bt_patch_ver);
+	btcoexist->btc_get(btcoexist, BTC_GET_U4_WIFI_FW_VER, &fw_ver);
+	CL_SPRINTF(cli_buf, BT_TMP_BUF_SIZE,
+		   "\r\n %-35s = %d_%x/ 0x%x/ 0x%x(%d)",
+		   "CoexVer/ FwVer/ PatchVer",
+		   glcoex_ver_date_8723b_2ant, glcoex_ver_8723b_2ant,
+		   fw_ver, bt_patch_ver, bt_patch_ver);
+	CL_PRINTF(cli_buf);
+
+	btcoexist->btc_get(btcoexist, BTC_GET_BL_HS_OPERATION, &bt_hs_on);
+	btcoexist->btc_get(btcoexist, BTC_GET_U1_WIFI_DOT11_CHNL,
+			   &wifi_dot11_chnl);
+	btcoexist->btc_get(btcoexist, BTC_GET_U1_WIFI_HS_CHNL, &wifi_hs_chnl);
+
+	CL_SPRINTF(cli_buf, BT_TMP_BUF_SIZE, "\r\n %-35s = %d / %d(%d)",
+		   "Dot11 channel / HsChnl(HsMode)",
+		   wifi_dot11_chnl, wifi_hs_chnl, bt_hs_on);
+	CL_PRINTF(cli_buf);
+
+	CL_SPRINTF(cli_buf, BT_TMP_BUF_SIZE, "\r\n %-35s = %02x %02x %02x ",
+		   "H2C Wifi inform bt chnl Info", coex_dm->wifi_chnl_info[0],
+		   coex_dm->wifi_chnl_info[1], coex_dm->wifi_chnl_info[2]);
+	CL_PRINTF(cli_buf);
+
+	btcoexist->btc_get(btcoexist, BTC_GET_S4_WIFI_RSSI, &wifi_rssi);
+	btcoexist->btc_get(btcoexist, BTC_GET_S4_HS_RSSI, &bt_hs_rssi);
+	CL_SPRINTF(cli_buf, BT_TMP_BUF_SIZE, "\r\n %-35s = %d/ %d",
+		   "Wifi rssi/ HS rssi", wifi_rssi, bt_hs_rssi);
+	CL_PRINTF(cli_buf);
+
+	btcoexist->btc_get(btcoexist, BTC_GET_BL_WIFI_SCAN, &scan);
+	btcoexist->btc_get(btcoexist, BTC_GET_BL_WIFI_LINK, &link);
+	btcoexist->btc_get(btcoexist, BTC_GET_BL_WIFI_ROAM, &roam);
+	CL_SPRINTF(cli_buf, BT_TMP_BUF_SIZE, "\r\n %-35s = %d/ %d/ %d ",
+		   "Wifi link/ roam/ scan", link, roam, scan);
+	CL_PRINTF(cli_buf);
+
+	btcoexist->btc_get(btcoexist, BTC_GET_BL_WIFI_UNDER_5G, &wifi_under_5g);
+	btcoexist->btc_get(btcoexist, BTC_GET_U4_WIFI_BW, &wifi_bw);
+	btcoexist->btc_get(btcoexist, BTC_GET_BL_WIFI_BUSY, &wifi_busy);
+	btcoexist->btc_get(btcoexist, BTC_GET_U4_WIFI_TRAFFIC_DIRECTION,
+			   &wifi_traffic_dir);
+	CL_SPRINTF(cli_buf, BT_TMP_BUF_SIZE, "\r\n %-35s = %s / %s/ %s ",
+		   "Wifi status", (wifi_under_5g ? "5G" : "2.4G"),
+		   ((BTC_WIFI_BW_LEGACY == wifi_bw) ? "Legacy" :
+		   (((BTC_WIFI_BW_HT40 == wifi_bw) ? "HT40" : "HT20"))),
+		   ((!wifi_busy) ? "idle" :
+		   ((BTC_WIFI_TRAFFIC_TX == wifi_traffic_dir) ?
+		   "uplink" : "downlink")));
+	CL_PRINTF(cli_buf);
+
+	CL_PRINTF(cli_buf);
+
+	CL_SPRINTF(cli_buf, BT_TMP_BUF_SIZE, "\r\n %-35s = %d / %d / %d / %d",
+		   "SCO/HID/PAN/A2DP",
+		   bt_link_info->sco_exist, bt_link_info->hid_exist,
+		   bt_link_info->pan_exist, bt_link_info->a2dp_exist);
+	CL_PRINTF(cli_buf);
+	btcoexist->btc_disp_dbg_msg(btcoexist, BTC_DBG_DISP_BT_LINK_INFO);
+
+	bt_info_ext = coex_sta->bt_info_ext;
+	CL_SPRINTF(cli_buf, BT_TMP_BUF_SIZE, "\r\n %-35s = %s",
+		   "BT Info A2DP rate",
+		   (bt_info_ext&BIT0) ? "Basic rate" : "EDR rate");
+	CL_PRINTF(cli_buf);
+
+	for (i = 0; i < BT_INFO_SRC_8723B_2ANT_MAX; i++) {
+		if (coex_sta->bt_info_c2h_cnt[i]) {
+			CL_SPRINTF(cli_buf, BT_TMP_BUF_SIZE,
+				   "\r\n %-35s = %02x %02x %02x "
+				   "%02x %02x %02x %02x(%d)",
+				   glbt_info_src_8723b_2ant[i],
+				   coex_sta->bt_info_c2h[i][0],
+				   coex_sta->bt_info_c2h[i][1],
+				   coex_sta->bt_info_c2h[i][2],
+				   coex_sta->bt_info_c2h[i][3],
+				   coex_sta->bt_info_c2h[i][4],
+				   coex_sta->bt_info_c2h[i][5],
+				   coex_sta->bt_info_c2h[i][6],
+				   coex_sta->bt_info_c2h_cnt[i]);
+			CL_PRINTF(cli_buf);
+		}
+	}
+
+	CL_SPRINTF(cli_buf, BT_TMP_BUF_SIZE, "\r\n %-35s = %s/%s",
+		   "PS state, IPS/LPS",
+		   ((coex_sta->under_ips ? "IPS ON" : "IPS OFF")),
+		   ((coex_sta->under_lps ? "LPS ON" : "LPS OFF")));
+	CL_PRINTF(cli_buf);
+	btcoexist->btc_disp_dbg_msg(btcoexist, BTC_DBG_DISP_FW_PWR_MODE_CMD);
+
+	/* Sw mechanism	*/
+	CL_SPRINTF(cli_buf, BT_TMP_BUF_SIZE,
+		   "\r\n %-35s", "============[Sw mechanism]============");
+	CL_PRINTF(cli_buf);
+	CL_SPRINTF(cli_buf, BT_TMP_BUF_SIZE, "\r\n %-35s = %d/ %d/ %d ",
+		   "SM1[ShRf/ LpRA/ LimDig]", coex_dm->cur_rf_rx_lpf_shrink,
+		   coex_dm->cur_low_penalty_ra, coex_dm->limited_dig);
+	CL_PRINTF(cli_buf);
+	CL_SPRINTF(cli_buf, BT_TMP_BUF_SIZE, "\r\n %-35s = %d/ %d/ %d(0x%x) ",
+		   "SM2[AgcT/ AdcB/ SwDacSwing(lvl)]",
+		   coex_dm->cur_agc_table_en, coex_dm->cur_adc_back_off,
+		   coex_dm->cur_dac_swing_on, coex_dm->cur_dac_swing_lvl);
+	CL_PRINTF(cli_buf);
+
+	/* Fw mechanism	*/
+	CL_SPRINTF(cli_buf, BT_TMP_BUF_SIZE, "\r\n %-35s",
+		   "============[Fw mechanism]============");
+	CL_PRINTF(cli_buf);
+
+	ps_tdma_case = coex_dm->cur_ps_tdma;
+	CL_SPRINTF(cli_buf, BT_TMP_BUF_SIZE,
+		   "\r\n %-35s = %02x %02x %02x %02x %02x case-%d (auto:%d)",
+		   "PS TDMA", coex_dm->ps_tdma_para[0],
+		   coex_dm->ps_tdma_para[1], coex_dm->ps_tdma_para[2],
+		   coex_dm->ps_tdma_para[3], coex_dm->ps_tdma_para[4],
+		   ps_tdma_case, coex_dm->auto_tdma_adjust);
+	CL_PRINTF(cli_buf);
+
+	CL_SPRINTF(cli_buf, BT_TMP_BUF_SIZE, "\r\n %-35s = %d/ %d ",
+		   "DecBtPwr/ IgnWlanAct", coex_dm->cur_dec_bt_pwr,
+		   coex_dm->cur_ignore_wlan_act);
+	CL_PRINTF(cli_buf);
+
+	/* Hw setting */
+	CL_SPRINTF(cli_buf, BT_TMP_BUF_SIZE, "\r\n %-35s",
+		   "============[Hw setting]============");
+	CL_PRINTF(cli_buf);
+
+	CL_SPRINTF(cli_buf, BT_TMP_BUF_SIZE, "\r\n %-35s = 0x%x",
+		   "RF-A, 0x1e initVal", coex_dm->bt_rf0x1e_backup);
+	CL_PRINTF(cli_buf);
+
+	u8tmp[0] = btcoexist->btc_read_1byte(btcoexist, 0x778);
+	u32tmp[0] = btcoexist->btc_read_4byte(btcoexist, 0x880);
+	CL_SPRINTF(cli_buf, BT_TMP_BUF_SIZE, "\r\n %-35s = 0x%x/ 0x%x",
+		   "0x778/0x880[29:25]", u8tmp[0],
+		   (u32tmp[0]&0x3e000000) >> 25);
+	CL_PRINTF(cli_buf);
+
+	u32tmp[0] = btcoexist->btc_read_4byte(btcoexist, 0x948);
+	u8tmp[0] = btcoexist->btc_read_1byte(btcoexist, 0x67);
+	u8tmp[1] = btcoexist->btc_read_1byte(btcoexist, 0x765);
+	CL_SPRINTF(cli_buf, BT_TMP_BUF_SIZE, "\r\n %-35s = 0x%x/ 0x%x/ 0x%x",
+		   "0x948/ 0x67[5] / 0x765",
+		   u32tmp[0], ((u8tmp[0]&0x20) >> 5), u8tmp[1]);
+	CL_PRINTF(cli_buf);
+
+	u32tmp[0] = btcoexist->btc_read_4byte(btcoexist, 0x92c);
+	u32tmp[1] = btcoexist->btc_read_4byte(btcoexist, 0x930);
+	u32tmp[2] = btcoexist->btc_read_4byte(btcoexist, 0x944);
+	CL_SPRINTF(cli_buf, BT_TMP_BUF_SIZE, "\r\n %-35s = 0x%x/ 0x%x/ 0x%x",
+		   "0x92c[1:0]/ 0x930[7:0]/0x944[1:0]",
+		   u32tmp[0]&0x3, u32tmp[1]&0xff, u32tmp[2]&0x3);
+	CL_PRINTF(cli_buf);
+
+
+	u8tmp[0] = btcoexist->btc_read_1byte(btcoexist, 0x39);
+	u8tmp[1] = btcoexist->btc_read_1byte(btcoexist, 0x40);
+	u32tmp[0] = btcoexist->btc_read_4byte(btcoexist, 0x4c);
+	u8tmp[2] = btcoexist->btc_read_1byte(btcoexist, 0x64);
+	CL_SPRINTF(cli_buf, BT_TMP_BUF_SIZE,
+		   "\r\n %-35s = 0x%x/ 0x%x/ 0x%x/ 0x%x",
+		   "0x38[11]/0x40/0x4c[24:23]/0x64[0]",
+		   ((u8tmp[0] & 0x8)>>3), u8tmp[1],
+		   ((u32tmp[0]&0x01800000)>>23), u8tmp[2]&0x1);
+	CL_PRINTF(cli_buf);
+
+	u32tmp[0] = btcoexist->btc_read_4byte(btcoexist, 0x550);
+	u8tmp[0] = btcoexist->btc_read_1byte(btcoexist, 0x522);
+	CL_SPRINTF(cli_buf, BT_TMP_BUF_SIZE, "\r\n %-35s = 0x%x/ 0x%x",
+		   "0x550(bcn ctrl)/0x522", u32tmp[0], u8tmp[0]);
+	CL_PRINTF(cli_buf);
+
+	u32tmp[0] = btcoexist->btc_read_4byte(btcoexist, 0xc50);
+	u8tmp[0] = btcoexist->btc_read_1byte(btcoexist, 0x49c);
+	CL_SPRINTF(cli_buf, BT_TMP_BUF_SIZE, "\r\n %-35s = 0x%x/ 0x%x",
+		   "0xc50(dig)/0x49c(null-drop)", u32tmp[0]&0xff, u8tmp[0]);
+	CL_PRINTF(cli_buf);
+
+	u32tmp[0] = btcoexist->btc_read_4byte(btcoexist, 0xda0);
+	u32tmp[1] = btcoexist->btc_read_4byte(btcoexist, 0xda4);
+	u32tmp[2] = btcoexist->btc_read_4byte(btcoexist, 0xda8);
+	u32tmp[3] = btcoexist->btc_read_4byte(btcoexist, 0xcf0);
+
+	u8tmp[0] = btcoexist->btc_read_1byte(btcoexist, 0xa5b);
+	u8tmp[1] = btcoexist->btc_read_1byte(btcoexist, 0xa5c);
+
+	fa_ofdm = ((u32tmp[0]&0xffff0000) >> 16) +
+		  ((u32tmp[1]&0xffff0000) >> 16) +
+		   (u32tmp[1] & 0xffff) +
+		   (u32tmp[2] & 0xffff) +
+		  ((u32tmp[3]&0xffff0000) >> 16) +
+		   (u32tmp[3] & 0xffff);
+	fa_cck = (u8tmp[0] << 8) + u8tmp[1];
+
+	CL_SPRINTF(cli_buf, BT_TMP_BUF_SIZE, "\r\n %-35s = 0x%x/ 0x%x/ 0x%x",
+		   "OFDM-CCA/OFDM-FA/CCK-FA",
+		   u32tmp[0]&0xffff, fa_ofdm, fa_cck);
+	CL_PRINTF(cli_buf);
+
+	u32tmp[0] = btcoexist->btc_read_4byte(btcoexist, 0x6c0);
+	u32tmp[1] = btcoexist->btc_read_4byte(btcoexist, 0x6c4);
+	u32tmp[2] = btcoexist->btc_read_4byte(btcoexist, 0x6c8);
+	u8tmp[0] = btcoexist->btc_read_1byte(btcoexist, 0x6cc);
+	CL_SPRINTF(cli_buf, BT_TMP_BUF_SIZE,
+		   "\r\n %-35s = 0x%x/ 0x%x/ 0x%x/ 0x%x",
+		   "0x6c0/0x6c4/0x6c8/0x6cc(coexTable)",
+		   u32tmp[0], u32tmp[1], u32tmp[2], u8tmp[0]);
+	CL_PRINTF(cli_buf);
+
+	CL_SPRINTF(cli_buf, BT_TMP_BUF_SIZE, "\r\n %-35s = %d/ %d",
+		   "0x770(high-pri rx/tx)",
+		   coex_sta->high_priority_rx, coex_sta->high_priority_tx);
+	CL_PRINTF(cli_buf);
+	CL_SPRINTF(cli_buf, BT_TMP_BUF_SIZE, "\r\n %-35s = %d/ %d",
+		   "0x774(low-pri rx/tx)", coex_sta->low_priority_rx,
+		   coex_sta->low_priority_tx);
+	CL_PRINTF(cli_buf);
+#if (BT_AUTO_REPORT_ONLY_8723B_2ANT == 1)
+	btc8723b2ant_monitor_bt_ctr(btcoexist);
+#endif
+	btcoexist->btc_disp_dbg_msg(btcoexist,
+	BTC_DBG_DISP_COEX_STATISTICS);
+}
+
+
+void ex_halbtc8723b2ant_ips_notify(struct btc_coexist *btcoexist, u8 type)
+{
+	if (BTC_IPS_ENTER == type) {
+		BTC_PRINT(BTC_MSG_INTERFACE, INTF_NOTIFY,
+			  "[BTCoex], IPS ENTER notify\n");
+		coex_sta->under_ips = true;
+		btc8723b2ant_coex_alloff(btcoexist);
+	} else if (BTC_IPS_LEAVE == type) {
+		BTC_PRINT(BTC_MSG_INTERFACE, INTF_NOTIFY,
+			  "[BTCoex], IPS LEAVE notify\n");
+		coex_sta->under_ips = false;
+	}
+}
+
+void ex_halbtc8723b2ant_lps_notify(struct btc_coexist *btcoexist, u8 type)
+{
+	if (BTC_LPS_ENABLE == type) {
+		BTC_PRINT(BTC_MSG_INTERFACE, INTF_NOTIFY,
+			  "[BTCoex], LPS ENABLE notify\n");
+		coex_sta->under_lps = true;
+	} else if (BTC_LPS_DISABLE == type) {
+		BTC_PRINT(BTC_MSG_INTERFACE, INTF_NOTIFY,
+			  "[BTCoex], LPS DISABLE notify\n");
+		coex_sta->under_lps = false;
+	}
+}
+
+void ex_halbtc8723b2ant_scan_notify(struct btc_coexist *btcoexist, u8 type)
+{
+	if (BTC_SCAN_START == type)
+		BTC_PRINT(BTC_MSG_INTERFACE, INTF_NOTIFY,
+			  "[BTCoex], SCAN START notify\n");
+	else if (BTC_SCAN_FINISH == type)
+		BTC_PRINT(BTC_MSG_INTERFACE, INTF_NOTIFY,
+			  "[BTCoex], SCAN FINISH notify\n");
+}
+
+void ex_halbtc8723b2ant_connect_notify(struct btc_coexist *btcoexist, u8 type)
+{
+	if (BTC_ASSOCIATE_START == type)
+		BTC_PRINT(BTC_MSG_INTERFACE, INTF_NOTIFY,
+			  "[BTCoex], CONNECT START notify\n");
+	else if (BTC_ASSOCIATE_FINISH == type)
+		BTC_PRINT(BTC_MSG_INTERFACE, INTF_NOTIFY,
+			  "[BTCoex], CONNECT FINISH notify\n");
+}
+
+void btc8723b_med_stat_notify(struct btc_coexist *btcoexist,
+					    u8 type)
+{
+	u8 h2c_parameter[3] = {0};
+	u32 wifi_bw;
+	u8 wifi_central_chnl;
+
+	if (BTC_MEDIA_CONNECT == type)
+		BTC_PRINT(BTC_MSG_INTERFACE, INTF_NOTIFY,
+			  "[BTCoex], MEDIA connect notify\n");
+	else
+		BTC_PRINT(BTC_MSG_INTERFACE, INTF_NOTIFY,
+			  "[BTCoex], MEDIA disconnect notify\n");
+
+	/* only 2.4G we need to inform bt the chnl mask */
+	btcoexist->btc_get(btcoexist,
+		BTC_GET_U1_WIFI_CENTRAL_CHNL, &wifi_central_chnl);
+	if ((BTC_MEDIA_CONNECT == type) &&
+	    (wifi_central_chnl <= 14)) {
+		h2c_parameter[0] = 0x1;
+		h2c_parameter[1] = wifi_central_chnl;
+		btcoexist->btc_get(btcoexist,
+			BTC_GET_U4_WIFI_BW, &wifi_bw);
+		if (BTC_WIFI_BW_HT40 == wifi_bw)
+			h2c_parameter[2] = 0x30;
+		else
+			h2c_parameter[2] = 0x20;
+	}
+
+	coex_dm->wifi_chnl_info[0] = h2c_parameter[0];
+	coex_dm->wifi_chnl_info[1] = h2c_parameter[1];
+	coex_dm->wifi_chnl_info[2] = h2c_parameter[2];
+
+	BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE_FW_EXEC,
+		  "[BTCoex], FW write 0x66=0x%x\n",
+		  h2c_parameter[0] << 16 | h2c_parameter[1] << 8 |
+		  h2c_parameter[2]);
+
+	btcoexist->btc_fill_h2c(btcoexist, 0x66, 3, h2c_parameter);
+}
+
+void ex_halbtc8723b2ant_special_packet_notify(struct btc_coexist *btcoexist,
+					      u8 type)
+{
+	if (type == BTC_PACKET_DHCP)
+		BTC_PRINT(BTC_MSG_INTERFACE, INTF_NOTIFY,
+			  "[BTCoex], DHCP Packet notify\n");
+}
+
+void ex_halbtc8723b2ant_bt_info_notify(struct btc_coexist *btcoexist,
+				       u8 *tmpbuf, u8 length)
+{
+	u8 bt_info = 0;
+	u8 i, rsp_source = 0;
+	bool bt_busy = false, limited_dig = false;
+	bool wifi_connected = false;
+
+	coex_sta->c2h_bt_info_req_sent = false;
+
+	rsp_source = tmpbuf[0]&0xf;
+	if (rsp_source >= BT_INFO_SRC_8723B_2ANT_MAX)
+		rsp_source = BT_INFO_SRC_8723B_2ANT_WIFI_FW;
+	coex_sta->bt_info_c2h_cnt[rsp_source]++;
+
+	BTC_PRINT(BTC_MSG_INTERFACE, INTF_NOTIFY,
+		  "[BTCoex], Bt info[%d], length=%d, hex data=[",
+		  rsp_source, length);
+	for (i = 0; i < length; i++) {
+		coex_sta->bt_info_c2h[rsp_source][i] = tmpbuf[i];
+		if (i == 1)
+			bt_info = tmpbuf[i];
+		if (i == length-1)
+			BTC_PRINT(BTC_MSG_INTERFACE, INTF_NOTIFY,
+				  "0x%02x]\n", tmpbuf[i]);
+		else
+			BTC_PRINT(BTC_MSG_INTERFACE, INTF_NOTIFY,
+				  "0x%02x, ", tmpbuf[i]);
+	}
+
+	if (btcoexist->manual_control) {
+		BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+			  "[BTCoex], BtInfoNotify(), "
+			  "return for Manual CTRL<===\n");
+		return;
+	}
+
+	if (BT_INFO_SRC_8723B_2ANT_WIFI_FW != rsp_source) {
+		coex_sta->bt_retry_cnt =	/* [3:0]*/
+			coex_sta->bt_info_c2h[rsp_source][2] & 0xf;
+
+		coex_sta->bt_rssi =
+			coex_sta->bt_info_c2h[rsp_source][3] * 2 + 10;
+
+		coex_sta->bt_info_ext =
+			coex_sta->bt_info_c2h[rsp_source][4];
+
+		/* Here we need to resend some wifi info to BT
+		 * because bt is reset and loss of the info.
+		 */
+		if ((coex_sta->bt_info_ext & BIT1)) {
+			BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+				  "[BTCoex], BT ext info bit1 check,"
+				  " send wifi BW&Chnl to BT!!\n");
+			btcoexist->btc_get(btcoexist, BTC_GET_BL_WIFI_CONNECTED,
+					   &wifi_connected);
+			if (wifi_connected)
+				btc8723b_med_stat_notify(btcoexist,
+							 BTC_MEDIA_CONNECT);
+			else
+				btc8723b_med_stat_notify(btcoexist,
+							 BTC_MEDIA_DISCONNECT);
+		}
+
+		if ((coex_sta->bt_info_ext & BIT3)) {
+			BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+				  "[BTCoex], BT ext info bit3 check, "
+				  "set BT NOT to ignore Wlan active!!\n");
+			btc8723b2ant_ignore_wlan_act(btcoexist, FORCE_EXEC,
+						     false);
+		} else {
+			/* BT already NOT ignore Wlan active, do nothing here.*/
+		}
+#if (BT_AUTO_REPORT_ONLY_8723B_2ANT == 0)
+		if ((coex_sta->bt_info_ext & BIT4)) {
+			/* BT auto report already enabled, do nothing*/
+		} else {
+			btc8723b2ant_bt_auto_report(btcoexist, FORCE_EXEC,
+						    true);
+		}
+#endif
+	}
+
+	/* check BIT2 first ==> check if bt is under inquiry or page scan*/
+	if (bt_info & BT_INFO_8723B_2ANT_B_INQ_PAGE)
+		coex_sta->c2h_bt_inquiry_page = true;
+	else
+		coex_sta->c2h_bt_inquiry_page = false;
+
+	/* set link exist status*/
+	if (!(bt_info & BT_INFO_8723B_2ANT_B_CONNECTION)) {
+		coex_sta->bt_link_exist = false;
+		coex_sta->pan_exist = false;
+		coex_sta->a2dp_exist = false;
+		coex_sta->hid_exist = false;
+		coex_sta->sco_exist = false;
+	} else { /*  connection exists */
+		coex_sta->bt_link_exist = true;
+		if (bt_info & BT_INFO_8723B_2ANT_B_FTP)
+			coex_sta->pan_exist = true;
+		else
+			coex_sta->pan_exist = false;
+		if (bt_info & BT_INFO_8723B_2ANT_B_A2DP)
+			coex_sta->a2dp_exist = true;
+		else
+			coex_sta->a2dp_exist = false;
+		if (bt_info & BT_INFO_8723B_2ANT_B_HID)
+			coex_sta->hid_exist = true;
+		else
+			coex_sta->hid_exist = false;
+		if (bt_info & BT_INFO_8723B_2ANT_B_SCO_ESCO)
+			coex_sta->sco_exist = true;
+		else
+			coex_sta->sco_exist = false;
+	}
+
+	btc8723b2ant_update_bt_link_info(btcoexist);
+
+	if (!(bt_info & BT_INFO_8723B_2ANT_B_CONNECTION)) {
+		coex_dm->bt_status = BT_8723B_2ANT_BT_STATUS_NON_CONNECTED_IDLE;
+		BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+			  "[BTCoex], BtInfoNotify(), "
+			  "BT Non-Connected idle!!!\n");
+	/* connection exists but no busy */
+	} else if (bt_info == BT_INFO_8723B_2ANT_B_CONNECTION) {
+		coex_dm->bt_status = BT_8723B_2ANT_BT_STATUS_CONNECTED_IDLE;
+		BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+			  "[BTCoex], BtInfoNotify(), BT Connected-idle!!!\n");
+	} else if ((bt_info & BT_INFO_8723B_2ANT_B_SCO_ESCO) ||
+		   (bt_info & BT_INFO_8723B_2ANT_B_SCO_BUSY)) {
+		coex_dm->bt_status = BT_8723B_2ANT_BT_STATUS_SCO_BUSY;
+		BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+			  "[BTCoex], BtInfoNotify(), BT SCO busy!!!\n");
+	} else if (bt_info & BT_INFO_8723B_2ANT_B_ACL_BUSY) {
+		coex_dm->bt_status = BT_8723B_2ANT_BT_STATUS_ACL_BUSY;
+		BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+			  "[BTCoex], BtInfoNotify(), BT ACL busy!!!\n");
+	} else {
+		coex_dm->bt_status = BT_8723B_2ANT_BT_STATUS_MAX;
+		BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+			  "[BTCoex], BtInfoNotify(), "
+			  "BT Non-Defined state!!!\n");
+	}
+
+	if ((BT_8723B_2ANT_BT_STATUS_ACL_BUSY == coex_dm->bt_status) ||
+	    (BT_8723B_2ANT_BT_STATUS_SCO_BUSY == coex_dm->bt_status) ||
+	    (BT_8723B_2ANT_BT_STATUS_ACL_SCO_BUSY == coex_dm->bt_status)) {
+		bt_busy = true;
+		limited_dig = true;
+	} else {
+		bt_busy = false;
+		limited_dig = false;
+	}
+
+	btcoexist->btc_set(btcoexist, BTC_SET_BL_BT_TRAFFIC_BUSY, &bt_busy);
+
+	coex_dm->limited_dig = limited_dig;
+	btcoexist->btc_set(btcoexist, BTC_SET_BL_BT_LIMITED_DIG, &limited_dig);
+
+	btc8723b2ant_run_coexist_mechanism(btcoexist);
+}
+
+void ex_halbtc8723b2ant_stack_operation_notify(struct btc_coexist *btcoexist,
+					       u8 type)
+{
+	if (BTC_STACK_OP_INQ_PAGE_PAIR_START == type)
+		BTC_PRINT(BTC_MSG_INTERFACE, INTF_NOTIFY,
+			  "[BTCoex],StackOP Inquiry/page/pair start notify\n");
+	else if (BTC_STACK_OP_INQ_PAGE_PAIR_FINISH == type)
+		BTC_PRINT(BTC_MSG_INTERFACE, INTF_NOTIFY,
+			  "[BTCoex],StackOP Inquiry/page/pair finish notify\n");
+}
+
+void ex_halbtc8723b2ant_halt_notify(struct btc_coexist *btcoexist)
+{
+	BTC_PRINT(BTC_MSG_INTERFACE, INTF_NOTIFY, "[BTCoex], Halt notify\n");
+
+	btc8723b2ant_ignore_wlan_act(btcoexist, FORCE_EXEC, true);
+	btc8723b_med_stat_notify(btcoexist, BTC_MEDIA_DISCONNECT);
+}
+
+void ex_halbtc8723b2ant_periodical(struct btc_coexist *btcoexist)
+{
+	struct btc_board_info *board_info = &btcoexist->board_info;
+	struct btc_stack_info *stack_info = &btcoexist->stack_info;
+	static u8 dis_ver_info_cnt;
+	u32 fw_ver = 0, bt_patch_ver = 0;
+
+	BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+		  "[BTCoex], =========================="
+		  "Periodical===========================\n");
+
+	if (dis_ver_info_cnt <= 5) {
+		dis_ver_info_cnt += 1;
+		BTC_PRINT(BTC_MSG_INTERFACE, INTF_INIT,
+			  "[BTCoex], ****************************"
+			  "************************************\n");
+		BTC_PRINT(BTC_MSG_INTERFACE, INTF_INIT,
+			  "[BTCoex], Ant PG Num/ Ant Mech/ "
+			  "Ant Pos = %d/ %d/ %d\n", board_info->pg_ant_num,
+			  board_info->btdm_ant_num, board_info->btdm_ant_pos);
+		BTC_PRINT(BTC_MSG_INTERFACE, INTF_INIT,
+			  "[BTCoex], BT stack/ hci ext ver = %s / %d\n",
+			  ((stack_info->profile_notified) ? "Yes" : "No"),
+			  stack_info->hci_version);
+		btcoexist->btc_get(btcoexist, BTC_GET_U4_BT_PATCH_VER,
+				   &bt_patch_ver);
+		btcoexist->btc_get(btcoexist, BTC_GET_U4_WIFI_FW_VER, &fw_ver);
+		BTC_PRINT(BTC_MSG_INTERFACE, INTF_INIT,
+			  "[BTCoex], CoexVer/ FwVer/ PatchVer = "
+			  "%d_%x/ 0x%x/ 0x%x(%d)\n",
+			  glcoex_ver_date_8723b_2ant, glcoex_ver_8723b_2ant,
+			  fw_ver, bt_patch_ver, bt_patch_ver);
+		BTC_PRINT(BTC_MSG_INTERFACE, INTF_INIT,
+			  "[BTCoex], *****************************"
+			  "***********************************\n");
+	}
+
+#if (BT_AUTO_REPORT_ONLY_8723B_2ANT == 0)
+	btc8723b2ant_query_bt_info(btcoexist);
+	btc8723b2ant_monitor_bt_ctr(btcoexist);
+	btc8723b2ant_monitor_bt_enable_disable(btcoexist);
+#else
+	if (btc8723b2ant_is_wifi_status_changed(btcoexist) ||
+	    coex_dm->auto_tdma_adjust)
+		btc8723b2ant_run_coexist_mechanism(btcoexist);
+#endif
+}
diff --git a/drivers/net/wireless/rtlwifi/btcoexist/halbtc8723b2ant.h b/drivers/net/wireless/rtlwifi/btcoexist/halbtc8723b2ant.h
new file mode 100644
index 000000000000..e0ad8e545f82
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/btcoexist/halbtc8723b2ant.h
@@ -0,0 +1,173 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2012  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+#ifndef _HAL8723B_2_ANT
+#define _HAL8723B_2_ANT
+
+/************************************************************************
+ * The following is for 8723B 2Ant BT Co-exist definition
+ ************************************************************************/
+#define	BT_AUTO_REPORT_ONLY_8723B_2ANT			1
+
+#define	BT_INFO_8723B_2ANT_B_FTP			BIT7
+#define	BT_INFO_8723B_2ANT_B_A2DP			BIT6
+#define	BT_INFO_8723B_2ANT_B_HID			BIT5
+#define	BT_INFO_8723B_2ANT_B_SCO_BUSY			BIT4
+#define	BT_INFO_8723B_2ANT_B_ACL_BUSY			BIT3
+#define	BT_INFO_8723B_2ANT_B_INQ_PAGE			BIT2
+#define	BT_INFO_8723B_2ANT_B_SCO_ESCO			BIT1
+#define	BT_INFO_8723B_2ANT_B_CONNECTION			BIT0
+
+#define BTC_RSSI_COEX_THRESH_TOL_8723B_2ANT		2
+
+enum BT_INFO_SRC_8723B_2ANT {
+	BT_INFO_SRC_8723B_2ANT_WIFI_FW			= 0x0,
+	BT_INFO_SRC_8723B_2ANT_BT_RSP			= 0x1,
+	BT_INFO_SRC_8723B_2ANT_BT_ACTIVE_SEND		= 0x2,
+	BT_INFO_SRC_8723B_2ANT_MAX
+};
+
+enum BT_8723B_2ANT_BT_STATUS {
+	BT_8723B_2ANT_BT_STATUS_NON_CONNECTED_IDLE	= 0x0,
+	BT_8723B_2ANT_BT_STATUS_CONNECTED_IDLE		= 0x1,
+	BT_8723B_2ANT_BT_STATUS_INQ_PAGE		= 0x2,
+	BT_8723B_2ANT_BT_STATUS_ACL_BUSY		= 0x3,
+	BT_8723B_2ANT_BT_STATUS_SCO_BUSY		= 0x4,
+	BT_8723B_2ANT_BT_STATUS_ACL_SCO_BUSY		= 0x5,
+	BT_8723B_2ANT_BT_STATUS_MAX
+};
+
+enum BT_8723B_2ANT_COEX_ALGO {
+	BT_8723B_2ANT_COEX_ALGO_UNDEFINED		= 0x0,
+	BT_8723B_2ANT_COEX_ALGO_SCO			= 0x1,
+	BT_8723B_2ANT_COEX_ALGO_HID			= 0x2,
+	BT_8723B_2ANT_COEX_ALGO_A2DP			= 0x3,
+	BT_8723B_2ANT_COEX_ALGO_A2DP_PANHS		= 0x4,
+	BT_8723B_2ANT_COEX_ALGO_PANEDR			= 0x5,
+	BT_8723B_2ANT_COEX_ALGO_PANHS			= 0x6,
+	BT_8723B_2ANT_COEX_ALGO_PANEDR_A2DP		= 0x7,
+	BT_8723B_2ANT_COEX_ALGO_PANEDR_HID		= 0x8,
+	BT_8723B_2ANT_COEX_ALGO_HID_A2DP_PANEDR		= 0x9,
+	BT_8723B_2ANT_COEX_ALGO_HID_A2DP		= 0xa,
+	BT_8723B_2ANT_COEX_ALGO_MAX			= 0xb,
+};
+
+struct coex_dm_8723b_2ant {
+	/* fw mechanism */
+	bool pre_dec_bt_pwr;
+	bool cur_dec_bt_pwr;
+	u8 pre_fw_dac_swing_lvl;
+	u8 cur_fw_dac_swing_lvl;
+	bool cur_ignore_wlan_act;
+	bool pre_ignore_wlan_act;
+	u8 pre_ps_tdma;
+	u8 cur_ps_tdma;
+	u8 ps_tdma_para[5];
+	u8 tdma_adj_type;
+	bool reset_tdma_adjust;
+	bool auto_tdma_adjust;
+	bool pre_ps_tdma_on;
+	bool cur_ps_tdma_on;
+	bool pre_bt_auto_report;
+	bool cur_bt_auto_report;
+
+	/* sw mechanism */
+	bool pre_rf_rx_lpf_shrink;
+	bool cur_rf_rx_lpf_shrink;
+	u32 bt_rf0x1e_backup;
+	bool pre_low_penalty_ra;
+	bool cur_low_penalty_ra;
+	bool pre_dac_swing_on;
+	u32 pre_dac_swing_lvl;
+	bool cur_dac_swing_on;
+	u32 cur_dac_swing_lvl;
+	bool pre_adc_back_off;
+	bool cur_adc_back_off;
+	bool pre_agc_table_en;
+	bool cur_agc_table_en;
+	u32 pre_val0x6c0;
+	u32 cur_val0x6c0;
+	u32 pre_val0x6c4;
+	u32 cur_val0x6c4;
+	u32 pre_val0x6c8;
+	u32 cur_val0x6c8;
+	u8 pre_val0x6cc;
+	u8 cur_val0x6cc;
+	bool limited_dig;
+
+	/* algorithm related */
+	u8 pre_algorithm;
+	u8 cur_algorithm;
+	u8 bt_status;
+	u8 wifi_chnl_info[3];
+
+	bool need_recover_0x948;
+	u16 backup_0x948;
+};
+
+struct coex_sta_8723b_2ant {
+	bool bt_link_exist;
+	bool sco_exist;
+	bool a2dp_exist;
+	bool hid_exist;
+	bool pan_exist;
+
+	bool under_lps;
+	bool under_ips;
+	u32 high_priority_tx;
+	u32 high_priority_rx;
+	u32 low_priority_tx;
+	u32 low_priority_rx;
+	u8 bt_rssi;
+	u8 pre_bt_rssi_state;
+	u8 pre_wifi_rssi_state[4];
+	bool c2h_bt_info_req_sent;
+	u8 bt_info_c2h[BT_INFO_SRC_8723B_2ANT_MAX][10];
+	u32 bt_info_c2h_cnt[BT_INFO_SRC_8723B_2ANT_MAX];
+	bool c2h_bt_inquiry_page;
+	u8 bt_retry_cnt;
+	u8 bt_info_ext;
+};
+
+/*********************************************************************
+ * The following is interface which will notify coex module.
+ *********************************************************************/
+void ex_halbtc8723b2ant_init_hwconfig(struct btc_coexist *btcoexist);
+void ex_halbtc8723b2ant_init_coex_dm(struct btc_coexist *btcoexist);
+void ex_halbtc8723b2ant_ips_notify(struct btc_coexist *btcoexist, u8 type);
+void ex_halbtc8723b2ant_lps_notify(struct btc_coexist *btcoexist, u8 type);
+void ex_halbtc8723b2ant_scan_notify(struct btc_coexist *btcoexist, u8 type);
+void ex_halbtc8723b2ant_connect_notify(struct btc_coexist *btcoexist, u8 type);
+void btc8723b_med_stat_notify(struct btc_coexist *btcoexist, u8 type);
+void ex_halbtc8723b2ant_special_packet_notify(struct btc_coexist *btcoexist,
+					      u8 type);
+void ex_halbtc8723b2ant_bt_info_notify(struct btc_coexist *btcoexist,
+				       u8 *tmpbuf, u8 length);
+void ex_halbtc8723b2ant_stack_operation_notify(struct btc_coexist *btcoexist,
+					       u8 type);
+void ex_halbtc8723b2ant_halt_notify(struct btc_coexist *btcoexist);
+void ex_halbtc8723b2ant_periodical(struct btc_coexist *btcoexist);
+void ex_halbtc8723b2ant_display_coex_info(struct btc_coexist *btcoexist);
+
+#endif
diff --git a/drivers/net/wireless/rtlwifi/btcoexist/halbtcoutsrc.c b/drivers/net/wireless/rtlwifi/btcoexist/halbtcoutsrc.c
new file mode 100644
index 000000000000..9e1217f2c966
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/btcoexist/halbtcoutsrc.c
@@ -0,0 +1,1011 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2013 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ ******************************************************************************/
+
+#include "halbt_precomp.h"
+
+/***********************************************
+ *		Global variables
+ ***********************************************/
+
+struct btc_coexist gl_bt_coexist;
+
+u32 btc_dbg_type[BTC_MSG_MAX];
+static u8 btc_dbg_buf[100];
+
+/***************************************************
+ *		Debug related function
+ ***************************************************/
+static bool halbtc_is_bt_coexist_available(struct btc_coexist *btcoexist)
+{
+	if (!btcoexist->binded || NULL == btcoexist->adapter)
+		return false;
+
+	return true;
+}
+
+static bool halbtc_is_wifi_busy(struct rtl_priv *rtlpriv)
+{
+	if (rtlpriv->link_info.busytraffic)
+		return true;
+	else
+		return false;
+}
+
+static void halbtc_dbg_init(void)
+{
+	u8 i;
+
+	for (i = 0; i < BTC_MSG_MAX; i++)
+		btc_dbg_type[i] = 0;
+
+	btc_dbg_type[BTC_MSG_INTERFACE] =
+/*			INTF_INIT				| */
+/*			INTF_NOTIFY				| */
+			0;
+
+	btc_dbg_type[BTC_MSG_ALGORITHM] =
+/*			ALGO_BT_RSSI_STATE			| */
+/*			ALGO_WIFI_RSSI_STATE			| */
+/*			ALGO_BT_MONITOR				| */
+/*			ALGO_TRACE				| */
+/*			ALGO_TRACE_FW				| */
+/*			ALGO_TRACE_FW_DETAIL			| */
+/*			ALGO_TRACE_FW_EXEC			| */
+/*			ALGO_TRACE_SW				| */
+/*			ALGO_TRACE_SW_DETAIL			| */
+/*			ALGO_TRACE_SW_EXEC			| */
+			0;
+}
+
+static bool halbtc_is_bt40(struct rtl_priv *adapter)
+{
+	struct rtl_priv *rtlpriv = adapter;
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	bool is_ht40 = true;
+	enum ht_channel_width bw = rtlphy->current_chan_bw;
+
+	if (bw == HT_CHANNEL_WIDTH_20)
+		is_ht40 = false;
+	else if (bw == HT_CHANNEL_WIDTH_20_40)
+		is_ht40 = true;
+
+	return is_ht40;
+}
+
+static bool halbtc_legacy(struct rtl_priv *adapter)
+{
+	struct rtl_priv *rtlpriv = adapter;
+	struct rtl_mac *mac = rtl_mac(rtlpriv);
+
+	bool is_legacy = false;
+
+	if ((mac->mode == WIRELESS_MODE_B) || (mac->mode == WIRELESS_MODE_B))
+		is_legacy = true;
+
+	return is_legacy;
+}
+
+bool halbtc_is_wifi_uplink(struct rtl_priv *adapter)
+{
+	struct rtl_priv *rtlpriv = adapter;
+
+	if (rtlpriv->link_info.tx_busy_traffic)
+		return true;
+	else
+		return false;
+}
+
+static u32 halbtc_get_wifi_bw(struct btc_coexist *btcoexist)
+{
+	struct rtl_priv *rtlpriv =
+		(struct rtl_priv *)btcoexist->adapter;
+	u32 wifi_bw = BTC_WIFI_BW_HT20;
+
+	if (halbtc_is_bt40(rtlpriv)) {
+		wifi_bw = BTC_WIFI_BW_HT40;
+	} else {
+		if (halbtc_legacy(rtlpriv))
+			wifi_bw = BTC_WIFI_BW_LEGACY;
+		else
+			wifi_bw = BTC_WIFI_BW_HT20;
+	}
+	return wifi_bw;
+}
+
+static u8 halbtc_get_wifi_central_chnl(struct btc_coexist *btcoexist)
+{
+	struct rtl_priv *rtlpriv = btcoexist->adapter;
+	struct rtl_phy	*rtlphy = &(rtlpriv->phy);
+	u8 chnl = 1;
+
+	if (rtlphy->current_channel != 0)
+		chnl = rtlphy->current_channel;
+	BTC_PRINT(BTC_MSG_ALGORITHM, ALGO_TRACE,
+		  "static halbtc_get_wifi_central_chnl:%d\n", chnl);
+	return chnl;
+}
+
+static void halbtc_leave_lps(struct btc_coexist *btcoexist)
+{
+	struct rtl_priv *rtlpriv;
+	struct rtl_ps_ctl *ppsc;
+	bool ap_enable = false;
+
+	rtlpriv = btcoexist->adapter;
+	ppsc = rtl_psc(rtlpriv);
+
+	btcoexist->btc_get(btcoexist, BTC_GET_BL_WIFI_AP_MODE_ENABLE,
+			   &ap_enable);
+
+	if (ap_enable) {
+		pr_info("halbtc_leave_lps()<--dont leave lps under AP mode\n");
+		return;
+	}
+
+	btcoexist->bt_info.bt_ctrl_lps = true;
+	btcoexist->bt_info.bt_lps_on = false;
+}
+
+static void halbtc_enter_lps(struct btc_coexist *btcoexist)
+{
+	struct rtl_priv *rtlpriv;
+	struct rtl_ps_ctl *ppsc;
+	bool ap_enable = false;
+
+	rtlpriv = btcoexist->adapter;
+	ppsc = rtl_psc(rtlpriv);
+
+	btcoexist->btc_get(btcoexist, BTC_GET_BL_WIFI_AP_MODE_ENABLE,
+			   &ap_enable);
+
+	if (ap_enable) {
+		pr_info("halbtc_enter_lps()<--dont enter lps under AP mode\n");
+		return;
+	}
+
+	btcoexist->bt_info.bt_ctrl_lps = true;
+	btcoexist->bt_info.bt_lps_on = false;
+}
+
+static void halbtc_normal_lps(struct btc_coexist *btcoexist)
+{
+	if (btcoexist->bt_info.bt_ctrl_lps) {
+		btcoexist->bt_info.bt_lps_on = false;
+		btcoexist->bt_info.bt_ctrl_lps = false;
+	}
+}
+
+static void halbtc_leave_low_power(void)
+{
+}
+
+static void halbtc_nomal_low_power(void)
+{
+}
+
+static void halbtc_disable_low_power(void)
+{
+}
+
+static void halbtc_aggregation_check(void)
+{
+}
+
+static u32 halbtc_get_bt_patch_version(struct btc_coexist *btcoexist)
+{
+	return 0;
+}
+
+static s32 halbtc_get_wifi_rssi(struct rtl_priv *adapter)
+{
+	struct rtl_priv *rtlpriv = adapter;
+	s32	undec_sm_pwdb = 0;
+
+	if (rtlpriv->mac80211.link_state >= MAC80211_LINKED)
+		undec_sm_pwdb = rtlpriv->dm.undec_sm_pwdb;
+	else /* associated entry pwdb */
+		undec_sm_pwdb = rtlpriv->dm.undec_sm_pwdb;
+	return undec_sm_pwdb;
+}
+
+static bool halbtc_get(void *void_btcoexist, u8 get_type, void *out_buf)
+{
+	struct btc_coexist *btcoexist = (struct btc_coexist *)void_btcoexist;
+	struct rtl_priv *rtlpriv = btcoexist->adapter;
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_mac *mac = rtl_mac(rtlpriv);
+	struct rtl_hal *rtlhal = rtl_hal(rtlpriv);
+	bool *bool_tmp = (bool *)out_buf;
+	int *s32_tmp = (int *)out_buf;
+	u32 *u32_tmp = (u32 *)out_buf;
+	u8 *u8_tmp = (u8 *)out_buf;
+	bool tmp = false;
+
+	if (!halbtc_is_bt_coexist_available(btcoexist))
+		return false;
+
+	switch (get_type) {
+	case BTC_GET_BL_HS_OPERATION:
+		*bool_tmp = false;
+		break;
+	case BTC_GET_BL_HS_CONNECTING:
+		*bool_tmp = false;
+		break;
+	case BTC_GET_BL_WIFI_CONNECTED:
+		if (rtlpriv->mac80211.link_state >= MAC80211_LINKED)
+			tmp = true;
+		*bool_tmp = tmp;
+		break;
+	case BTC_GET_BL_WIFI_BUSY:
+		if (halbtc_is_wifi_busy(rtlpriv))
+			*bool_tmp = true;
+		else
+			*bool_tmp = false;
+		break;
+	case BTC_GET_BL_WIFI_SCAN:
+		if (mac->act_scanning)
+			*bool_tmp = true;
+		else
+			*bool_tmp = false;
+		break;
+	case BTC_GET_BL_WIFI_LINK:
+		if (mac->link_state == MAC80211_LINKING)
+			*bool_tmp = true;
+		else
+			*bool_tmp = false;
+		break;
+	case BTC_GET_BL_WIFI_ROAM:	/*TODO*/
+		if (mac->link_state == MAC80211_LINKING)
+			*bool_tmp = true;
+		else
+			*bool_tmp = false;
+		break;
+	case BTC_GET_BL_WIFI_4_WAY_PROGRESS:	/*TODO*/
+			*bool_tmp = false;
+
+		break;
+	case BTC_GET_BL_WIFI_UNDER_5G:
+		*bool_tmp = false; /*TODO*/
+
+	case BTC_GET_BL_WIFI_DHCP:	/*TODO*/
+		break;
+	case BTC_GET_BL_WIFI_SOFTAP_IDLE:
+		*bool_tmp = true;
+		break;
+	case BTC_GET_BL_WIFI_SOFTAP_LINKING:
+		*bool_tmp = false;
+		break;
+	case BTC_GET_BL_WIFI_IN_EARLY_SUSPEND:
+		*bool_tmp = false;
+		break;
+	case BTC_GET_BL_WIFI_AP_MODE_ENABLE:
+		*bool_tmp = false;
+		break;
+	case BTC_GET_BL_WIFI_ENABLE_ENCRYPTION:
+		if (NO_ENCRYPTION == rtlpriv->sec.pairwise_enc_algorithm)
+			*bool_tmp = false;
+		else
+			*bool_tmp = true;
+		break;
+	case BTC_GET_BL_WIFI_UNDER_B_MODE:
+		*bool_tmp = false; /*TODO*/
+		break;
+	case BTC_GET_BL_EXT_SWITCH:
+		*bool_tmp = false;
+		break;
+	case BTC_GET_S4_WIFI_RSSI:
+		*s32_tmp = halbtc_get_wifi_rssi(rtlpriv);
+		break;
+	case BTC_GET_S4_HS_RSSI:	/*TODO*/
+		*s32_tmp = halbtc_get_wifi_rssi(rtlpriv);
+		break;
+	case BTC_GET_U4_WIFI_BW:
+		*u32_tmp = halbtc_get_wifi_bw(btcoexist);
+		break;
+	case BTC_GET_U4_WIFI_TRAFFIC_DIRECTION:
+		if (halbtc_is_wifi_uplink(rtlpriv))
+			*u32_tmp = BTC_WIFI_TRAFFIC_TX;
+		else
+			*u32_tmp = BTC_WIFI_TRAFFIC_RX;
+		break;
+	case BTC_GET_U4_WIFI_FW_VER:
+		*u32_tmp = rtlhal->fw_version;
+		break;
+	case BTC_GET_U4_BT_PATCH_VER:
+		*u32_tmp = halbtc_get_bt_patch_version(btcoexist);
+		break;
+	case BTC_GET_U1_WIFI_DOT11_CHNL:
+		*u8_tmp = rtlphy->current_channel;
+		break;
+	case BTC_GET_U1_WIFI_CENTRAL_CHNL:
+		*u8_tmp = halbtc_get_wifi_central_chnl(btcoexist);
+		break;
+	case BTC_GET_U1_WIFI_HS_CHNL:
+		*u8_tmp = 1;/*BT_OperateChnl(rtlpriv);*/
+		break;
+	case BTC_GET_U1_MAC_PHY_MODE:
+		*u8_tmp = BTC_MP_UNKNOWN;
+		break;
+
+		/************* 1Ant **************/
+	case BTC_GET_U1_LPS_MODE:
+		*u8_tmp = btcoexist->pwr_mode_val[0];
+		break;
+
+	default:
+		break;
+	}
+
+	return true;
+}
+
+static bool halbtc_set(void *void_btcoexist, u8 set_type, void *in_buf)
+{
+	struct btc_coexist *btcoexist = (struct btc_coexist *)void_btcoexist;
+	bool *bool_tmp = (bool *)in_buf;
+	u8 *u8_tmp = (u8 *)in_buf;
+	u32 *u32_tmp = (u32 *)in_buf;
+
+	if (!halbtc_is_bt_coexist_available(btcoexist))
+		return false;
+
+	switch (set_type) {
+	/* set some bool type variables. */
+	case BTC_SET_BL_BT_DISABLE:
+		btcoexist->bt_info.bt_disabled = *bool_tmp;
+		break;
+	case BTC_SET_BL_BT_TRAFFIC_BUSY:
+		btcoexist->bt_info.bt_busy = *bool_tmp;
+		break;
+	case BTC_SET_BL_BT_LIMITED_DIG:
+		btcoexist->bt_info.limited_dig = *bool_tmp;
+		break;
+	case BTC_SET_BL_FORCE_TO_ROAM:
+		btcoexist->bt_info.force_to_roam = *bool_tmp;
+		break;
+	case BTC_SET_BL_TO_REJ_AP_AGG_PKT:
+		btcoexist->bt_info.reject_agg_pkt = *bool_tmp;
+		break;
+	case BTC_SET_BL_BT_CTRL_AGG_SIZE:
+		btcoexist->bt_info.b_bt_ctrl_buf_size = *bool_tmp;
+		break;
+	case BTC_SET_BL_INC_SCAN_DEV_NUM:
+		btcoexist->bt_info.increase_scan_dev_num = *bool_tmp;
+		break;
+		/* set some u1Byte type variables. */
+	case BTC_SET_U1_RSSI_ADJ_VAL_FOR_AGC_TABLE_ON:
+		btcoexist->bt_info.rssi_adjust_for_agc_table_on = *u8_tmp;
+		break;
+	case BTC_SET_U1_AGG_BUF_SIZE:
+		btcoexist->bt_info.agg_buf_size = *u8_tmp;
+		break;
+		/* the following are some action which will be triggered */
+	case BTC_SET_ACT_GET_BT_RSSI:
+		/*BTHCI_SendGetBtRssiEvent(rtlpriv);*/
+		break;
+	case BTC_SET_ACT_AGGREGATE_CTRL:
+		halbtc_aggregation_check();
+		break;
+
+		/* 1Ant */
+	case BTC_SET_U1_RSSI_ADJ_VAL_FOR_1ANT_COEX_TYPE:
+		btcoexist->bt_info.rssi_adjust_for_1ant_coex_type = *u8_tmp;
+		break;
+	case BTC_SET_UI_SCAN_SIG_COMPENSATION:
+	/*	rtlpriv->mlmepriv.scan_compensation = *u8_tmp;  */
+		break;
+	case BTC_SET_U1_1ANT_LPS:
+		btcoexist->bt_info.lps_1ant = *u8_tmp;
+		break;
+	case BTC_SET_U1_1ANT_RPWM:
+		btcoexist->bt_info.rpwm_1ant = *u8_tmp;
+		break;
+	/* the following are some action which will be triggered  */
+	case BTC_SET_ACT_LEAVE_LPS:
+		halbtc_leave_lps(btcoexist);
+		break;
+	case BTC_SET_ACT_ENTER_LPS:
+		halbtc_enter_lps(btcoexist);
+		break;
+	case BTC_SET_ACT_NORMAL_LPS:
+		halbtc_normal_lps(btcoexist);
+		break;
+	case BTC_SET_ACT_DISABLE_LOW_POWER:
+		halbtc_disable_low_power();
+		break;
+	case BTC_SET_ACT_UPDATE_ra_mask:
+		btcoexist->bt_info.ra_mask = *u32_tmp;
+		break;
+	case BTC_SET_ACT_SEND_MIMO_PS:
+		break;
+	case BTC_SET_ACT_INC_FORCE_EXEC_PWR_CMD_CNT:
+		btcoexist->bt_info.force_exec_pwr_cmd_cnt++;
+		break;
+	case BTC_SET_ACT_CTRL_BT_INFO: /*wait for 8812/8821*/
+		break;
+	case BTC_SET_ACT_CTRL_BT_COEX:
+		break;
+	default:
+		break;
+	}
+
+	return true;
+}
+
+static void halbtc_display_coex_statistics(struct btc_coexist *btcoexist)
+{
+}
+
+static void halbtc_display_bt_link_info(struct btc_coexist *btcoexist)
+{
+}
+
+static void halbtc_display_bt_fw_info(struct btc_coexist *btcoexist)
+{
+}
+
+static void halbtc_display_fw_pwr_mode_cmd(struct btc_coexist *btcoexist)
+{
+}
+
+/************************************************************
+ *		IO related function
+ ************************************************************/
+static u8 halbtc_read_1byte(void *bt_context, u32 reg_addr)
+{
+	struct btc_coexist *btcoexist = (struct btc_coexist *)bt_context;
+	struct rtl_priv *rtlpriv = btcoexist->adapter;
+
+	return	rtl_read_byte(rtlpriv, reg_addr);
+}
+
+static u16 halbtc_read_2byte(void *bt_context, u32 reg_addr)
+{
+	struct btc_coexist *btcoexist = (struct btc_coexist *)bt_context;
+	struct rtl_priv *rtlpriv = btcoexist->adapter;
+
+	return	rtl_read_word(rtlpriv, reg_addr);
+}
+
+static u32 halbtc_read_4byte(void *bt_context, u32 reg_addr)
+{
+	struct btc_coexist *btcoexist = (struct btc_coexist *)bt_context;
+	struct rtl_priv *rtlpriv = btcoexist->adapter;
+
+	return	rtl_read_dword(rtlpriv, reg_addr);
+}
+
+static void halbtc_write_1byte(void *bt_context, u32 reg_addr, u8 data)
+{
+	struct btc_coexist *btcoexist = (struct btc_coexist *)bt_context;
+	struct rtl_priv *rtlpriv = btcoexist->adapter;
+
+	rtl_write_byte(rtlpriv, reg_addr, data);
+}
+
+static void halbtc_bitmask_write_1byte(void *bt_context, u32 reg_addr,
+				       u32 bit_mask, u8 data)
+{
+	struct btc_coexist *btcoexist = (struct btc_coexist *)bt_context;
+	struct rtl_priv *rtlpriv = btcoexist->adapter;
+	u8 original_value, bit_shift = 0;
+	u8 i;
+
+	if (bit_mask != MASKDWORD) {/*if not "double word" write*/
+		original_value = rtl_read_byte(rtlpriv, reg_addr);
+		for (i = 0; i <= 7; i++) {
+			if ((bit_mask>>i) & 0x1)
+				break;
+		}
+		bit_shift = i;
+		data = (original_value & (~bit_mask)) |
+			((data << bit_shift) & bit_mask);
+	}
+	rtl_write_byte(rtlpriv, reg_addr, data);
+}
+
+static void halbtc_write_2byte(void *bt_context, u32 reg_addr, u16 data)
+{
+	struct btc_coexist *btcoexist = (struct btc_coexist *)bt_context;
+	struct rtl_priv *rtlpriv = btcoexist->adapter;
+
+	rtl_write_word(rtlpriv, reg_addr, data);
+}
+
+static void halbtc_write_4byte(void *bt_context, u32 reg_addr, u32 data)
+{
+	struct btc_coexist *btcoexist =
+		(struct btc_coexist *)bt_context;
+	struct rtl_priv *rtlpriv = btcoexist->adapter;
+
+	rtl_write_dword(rtlpriv, reg_addr, data);
+}
+
+static void halbtc_set_bbreg(void *bt_context, u32 reg_addr, u32 bit_mask,
+			     u32 data)
+{
+	struct btc_coexist *btcoexist = (struct btc_coexist *)bt_context;
+	struct rtl_priv *rtlpriv = btcoexist->adapter;
+
+	rtl_set_bbreg(rtlpriv->mac80211.hw, reg_addr, bit_mask, data);
+}
+
+static u32 halbtc_get_bbreg(void *bt_context, u32 reg_addr, u32 bit_mask)
+{
+	struct btc_coexist *btcoexist = (struct btc_coexist *)bt_context;
+	struct rtl_priv *rtlpriv = btcoexist->adapter;
+
+	return rtl_get_bbreg(rtlpriv->mac80211.hw, reg_addr, bit_mask);
+}
+
+static void halbtc_set_rfreg(void *bt_context, u8 rf_path, u32 reg_addr,
+			     u32 bit_mask, u32 data)
+{
+	struct btc_coexist *btcoexist = (struct btc_coexist *)bt_context;
+	struct rtl_priv *rtlpriv = btcoexist->adapter;
+
+	rtl_set_rfreg(rtlpriv->mac80211.hw, rf_path, reg_addr, bit_mask, data);
+}
+
+static u32 halbtc_get_rfreg(void *bt_context, u8 rf_path, u32 reg_addr,
+			    u32 bit_mask)
+{
+	struct btc_coexist *btcoexist = (struct btc_coexist *)bt_context;
+	struct rtl_priv *rtlpriv = btcoexist->adapter;
+
+	return rtl_get_rfreg(rtlpriv->mac80211.hw, rf_path, reg_addr, bit_mask);
+}
+
+static void halbtc_fill_h2c_cmd(void *bt_context, u8 element_id,
+				u32 cmd_len, u8 *cmd_buf)
+{
+	struct btc_coexist *btcoexist = (struct btc_coexist *)bt_context;
+	struct rtl_priv *rtlpriv = btcoexist->adapter;
+
+	rtlpriv->cfg->ops->fill_h2c_cmd(rtlpriv->mac80211.hw, element_id,
+					cmd_len, cmd_buf);
+}
+
+static void halbtc_display_dbg_msg(void *bt_context, u8 disp_type)
+{
+	struct btc_coexist *btcoexist =	(struct btc_coexist *)bt_context;
+	switch (disp_type) {
+	case BTC_DBG_DISP_COEX_STATISTICS:
+		halbtc_display_coex_statistics(btcoexist);
+		break;
+	case BTC_DBG_DISP_BT_LINK_INFO:
+		halbtc_display_bt_link_info(btcoexist);
+		break;
+	case BTC_DBG_DISP_BT_FW_VER:
+		halbtc_display_bt_fw_info(btcoexist);
+		break;
+	case BTC_DBG_DISP_FW_PWR_MODE_CMD:
+		halbtc_display_fw_pwr_mode_cmd(btcoexist);
+		break;
+	default:
+		break;
+	}
+}
+
+/*****************************************************************
+ *         Extern functions called by other module
+ *****************************************************************/
+bool exhalbtc_initlize_variables(struct rtl_priv *adapter)
+{
+	struct btc_coexist *btcoexist = &gl_bt_coexist;
+
+	btcoexist->statistics.cnt_bind++;
+
+	halbtc_dbg_init();
+
+	if (btcoexist->binded)
+		return false;
+	else
+		btcoexist->binded = true;
+
+#if (defined(CONFIG_PCI_HCI))
+	btcoexist->chip_interface = BTC_INTF_PCI;
+#elif (defined(CONFIG_USB_HCI))
+	btcoexist->chip_interface = BTC_INTF_USB;
+#elif (defined(CONFIG_SDIO_HCI))
+	btcoexist->chip_interface = BTC_INTF_SDIO;
+#elif (defined(CONFIG_GSPI_HCI))
+	btcoexist->chip_interface = BTC_INTF_GSPI;
+#else
+	btcoexist->chip_interface = BTC_INTF_UNKNOWN;
+#endif
+
+	if (NULL == btcoexist->adapter)
+		btcoexist->adapter = adapter;
+
+	btcoexist->stack_info.profile_notified = false;
+
+	btcoexist->btc_read_1byte = halbtc_read_1byte;
+	btcoexist->btc_write_1byte = halbtc_write_1byte;
+	btcoexist->btc_write_1byte_bitmask = halbtc_bitmask_write_1byte;
+	btcoexist->btc_read_2byte = halbtc_read_2byte;
+	btcoexist->btc_write_2byte = halbtc_write_2byte;
+	btcoexist->btc_read_4byte = halbtc_read_4byte;
+	btcoexist->btc_write_4byte = halbtc_write_4byte;
+
+	btcoexist->btc_set_bb_reg = halbtc_set_bbreg;
+	btcoexist->btc_get_bb_reg = halbtc_get_bbreg;
+
+	btcoexist->btc_set_rf_reg = halbtc_set_rfreg;
+	btcoexist->btc_get_rf_reg = halbtc_get_rfreg;
+
+	btcoexist->btc_fill_h2c = halbtc_fill_h2c_cmd;
+	btcoexist->btc_disp_dbg_msg = halbtc_display_dbg_msg;
+
+	btcoexist->btc_get = halbtc_get;
+	btcoexist->btc_set = halbtc_set;
+
+	btcoexist->cli_buf = &btc_dbg_buf[0];
+
+	btcoexist->bt_info.b_bt_ctrl_buf_size = false;
+	btcoexist->bt_info.agg_buf_size = 5;
+
+	btcoexist->bt_info.increase_scan_dev_num = false;
+	return true;
+}
+
+void exhalbtc_init_hw_config(struct btc_coexist *btcoexist)
+{
+	struct rtl_priv *rtlpriv = btcoexist->adapter;
+	struct rtl_hal *rtlhal = rtl_hal(rtlpriv);
+
+	if (!halbtc_is_bt_coexist_available(btcoexist))
+		return;
+
+	btcoexist->statistics.cnt_init_hw_config++;
+
+	if (rtlhal->hw_type == HARDWARE_TYPE_RTL8723BE)
+		ex_halbtc8723b2ant_init_hwconfig(btcoexist);
+}
+
+void exhalbtc_init_coex_dm(struct btc_coexist *btcoexist)
+{
+	struct rtl_priv *rtlpriv = btcoexist->adapter;
+	struct rtl_hal *rtlhal = rtl_hal(rtlpriv);
+
+	if (!halbtc_is_bt_coexist_available(btcoexist))
+		return;
+
+	btcoexist->statistics.cnt_init_coex_dm++;
+
+	if (rtlhal->hw_type == HARDWARE_TYPE_RTL8723BE)
+		ex_halbtc8723b2ant_init_coex_dm(btcoexist);
+
+	btcoexist->initilized = true;
+}
+
+void exhalbtc_ips_notify(struct btc_coexist *btcoexist, u8 type)
+{
+	struct rtl_priv *rtlpriv = btcoexist->adapter;
+	struct rtl_hal *rtlhal = rtl_hal(rtlpriv);
+	u8 ips_type;
+
+	if (!halbtc_is_bt_coexist_available(btcoexist))
+		return;
+	btcoexist->statistics.cnt_ips_notify++;
+	if (btcoexist->manual_control)
+		return;
+
+	if (ERFOFF == type)
+		ips_type = BTC_IPS_ENTER;
+	else
+		ips_type = BTC_IPS_LEAVE;
+
+	halbtc_leave_low_power();
+
+	if (rtlhal->hw_type == HARDWARE_TYPE_RTL8723BE)
+		ex_halbtc8723b2ant_ips_notify(btcoexist, ips_type);
+
+	halbtc_nomal_low_power();
+}
+
+void exhalbtc_lps_notify(struct btc_coexist *btcoexist, u8 type)
+{
+	struct rtl_priv *rtlpriv = btcoexist->adapter;
+	struct rtl_hal *rtlhal = rtl_hal(rtlpriv);
+	u8 lps_type;
+
+	if (!halbtc_is_bt_coexist_available(btcoexist))
+		return;
+	btcoexist->statistics.cnt_lps_notify++;
+	if (btcoexist->manual_control)
+		return;
+
+	if (EACTIVE == type)
+		lps_type = BTC_LPS_DISABLE;
+	else
+		lps_type = BTC_LPS_ENABLE;
+
+	if (rtlhal->hw_type == HARDWARE_TYPE_RTL8723BE)
+		ex_halbtc8723b2ant_lps_notify(btcoexist, lps_type);
+}
+
+void exhalbtc_scan_notify(struct btc_coexist *btcoexist, u8 type)
+{
+	struct rtl_priv *rtlpriv = btcoexist->adapter;
+	struct rtl_hal *rtlhal = rtl_hal(rtlpriv);
+	u8 scan_type;
+
+	if (!halbtc_is_bt_coexist_available(btcoexist))
+		return;
+	btcoexist->statistics.cnt_scan_notify++;
+	if (btcoexist->manual_control)
+		return;
+
+	if (type)
+		scan_type = BTC_SCAN_START;
+	else
+		scan_type = BTC_SCAN_FINISH;
+
+	halbtc_leave_low_power();
+
+	if (rtlhal->hw_type == HARDWARE_TYPE_RTL8723BE)
+		ex_halbtc8723b2ant_scan_notify(btcoexist, scan_type);
+
+	halbtc_nomal_low_power();
+}
+
+void exhalbtc_connect_notify(struct btc_coexist *btcoexist, u8 action)
+{
+	struct rtl_priv *rtlpriv = btcoexist->adapter;
+	struct rtl_hal *rtlhal = rtl_hal(rtlpriv);
+	u8 asso_type;
+
+	if (!halbtc_is_bt_coexist_available(btcoexist))
+		return;
+	btcoexist->statistics.cnt_connect_notify++;
+	if (btcoexist->manual_control)
+		return;
+
+	if (action)
+		asso_type = BTC_ASSOCIATE_START;
+	else
+		asso_type = BTC_ASSOCIATE_FINISH;
+
+	halbtc_leave_low_power();
+
+	if (rtlhal->hw_type == HARDWARE_TYPE_RTL8723BE)
+		ex_halbtc8723b2ant_connect_notify(btcoexist, asso_type);
+}
+
+void exhalbtc_mediastatus_notify(struct btc_coexist *btcoexist,
+				 enum _RT_MEDIA_STATUS media_status)
+{
+	struct rtl_priv *rtlpriv = btcoexist->adapter;
+	struct rtl_hal *rtlhal = rtl_hal(rtlpriv);
+	u8 status;
+
+	if (!halbtc_is_bt_coexist_available(btcoexist))
+		return;
+	btcoexist->statistics.cnt_media_status_notify++;
+	if (btcoexist->manual_control)
+		return;
+
+	if (RT_MEDIA_CONNECT == media_status)
+		status = BTC_MEDIA_CONNECT;
+	else
+		status = BTC_MEDIA_DISCONNECT;
+
+	halbtc_leave_low_power();
+
+	if (rtlhal->hw_type == HARDWARE_TYPE_RTL8723BE)
+		btc8723b_med_stat_notify(btcoexist, status);
+
+	halbtc_nomal_low_power();
+}
+
+void exhalbtc_special_packet_notify(struct btc_coexist *btcoexist, u8 pkt_type)
+{
+	struct rtl_priv *rtlpriv = btcoexist->adapter;
+	struct rtl_hal *rtlhal = rtl_hal(rtlpriv);
+	u8 packet_type;
+
+	if (!halbtc_is_bt_coexist_available(btcoexist))
+		return;
+	btcoexist->statistics.cnt_special_packet_notify++;
+	if (btcoexist->manual_control)
+		return;
+
+	packet_type = BTC_PACKET_DHCP;
+
+	halbtc_leave_low_power();
+
+	if (rtlhal->hw_type == HARDWARE_TYPE_RTL8723BE)
+		ex_halbtc8723b2ant_special_packet_notify(btcoexist,
+							 packet_type);
+
+	halbtc_nomal_low_power();
+}
+
+void exhalbtc_bt_info_notify(struct btc_coexist *btcoexist,
+			     u8 *tmp_buf, u8 length)
+{
+	struct rtl_priv *rtlpriv = btcoexist->adapter;
+	struct rtl_hal *rtlhal = rtl_hal(rtlpriv);
+	if (!halbtc_is_bt_coexist_available(btcoexist))
+		return;
+	btcoexist->statistics.cnt_bt_info_notify++;
+
+	if (rtlhal->hw_type == HARDWARE_TYPE_RTL8723BE)
+		ex_halbtc8723b2ant_bt_info_notify(btcoexist, tmp_buf, length);
+}
+
+void exhalbtc_stack_operation_notify(struct btc_coexist *btcoexist, u8 type)
+{
+	struct rtl_priv *rtlpriv = btcoexist->adapter;
+	struct rtl_hal *rtlhal = rtl_hal(rtlpriv);
+	u8 stack_op_type;
+
+	if (!halbtc_is_bt_coexist_available(btcoexist))
+		return;
+	btcoexist->statistics.cnt_stack_operation_notify++;
+	if (btcoexist->manual_control)
+		return;
+
+	stack_op_type = BTC_STACK_OP_NONE;
+
+	halbtc_leave_low_power();
+
+	if (rtlhal->hw_type == HARDWARE_TYPE_RTL8723BE)
+		ex_halbtc8723b2ant_stack_operation_notify(btcoexist,
+							  stack_op_type);
+
+	halbtc_nomal_low_power();
+}
+
+void exhalbtc_halt_notify(struct btc_coexist *btcoexist)
+{
+	struct rtl_priv *rtlpriv = btcoexist->adapter;
+	struct rtl_hal *rtlhal = rtl_hal(rtlpriv);
+	if (!halbtc_is_bt_coexist_available(btcoexist))
+		return;
+
+	if (rtlhal->hw_type == HARDWARE_TYPE_RTL8723BE)
+		ex_halbtc8723b2ant_halt_notify(btcoexist);
+}
+
+void exhalbtc_pnp_notify(struct btc_coexist *btcoexist, u8 pnp_state)
+{
+	if (!halbtc_is_bt_coexist_available(btcoexist))
+		return;
+}
+
+void exhalbtc_periodical(struct btc_coexist *btcoexist)
+{
+	struct rtl_priv *rtlpriv = btcoexist->adapter;
+	struct rtl_hal *rtlhal = rtl_hal(rtlpriv);
+	if (!halbtc_is_bt_coexist_available(btcoexist))
+		return;
+	btcoexist->statistics.cnt_periodical++;
+
+	halbtc_leave_low_power();
+
+	if (rtlhal->hw_type == HARDWARE_TYPE_RTL8723BE)
+		ex_halbtc8723b2ant_periodical(btcoexist);
+
+	halbtc_nomal_low_power();
+}
+
+void exhalbtc_dbg_control(struct btc_coexist *btcoexist,
+			  u8 code, u8 len, u8 *data)
+{
+	if (!halbtc_is_bt_coexist_available(btcoexist))
+		return;
+	btcoexist->statistics.cnt_dbg_ctrl++;
+}
+
+void exhalbtc_stack_update_profile_info(void)
+{
+}
+
+void exhalbtc_update_min_bt_rssi(char bt_rssi)
+{
+	struct btc_coexist *btcoexist = &gl_bt_coexist;
+
+	if (!halbtc_is_bt_coexist_available(btcoexist))
+		return;
+
+	btcoexist->stack_info.min_bt_rssi = bt_rssi;
+}
+
+void exhalbtc_set_hci_version(u16 hci_version)
+{
+	struct btc_coexist *btcoexist = &gl_bt_coexist;
+
+	if (!halbtc_is_bt_coexist_available(btcoexist))
+		return;
+
+	btcoexist->stack_info.hci_version = hci_version;
+}
+
+void exhalbtc_set_bt_patch_version(u16 bt_hci_version, u16 bt_patch_version)
+{
+	struct btc_coexist *btcoexist = &gl_bt_coexist;
+
+	if (!halbtc_is_bt_coexist_available(btcoexist))
+		return;
+
+	btcoexist->bt_info.bt_real_fw_ver = bt_patch_version;
+	btcoexist->bt_info.bt_hci_ver = bt_hci_version;
+}
+
+void exhalbtc_set_bt_exist(bool bt_exist)
+{
+	gl_bt_coexist.board_info.bt_exist = bt_exist;
+}
+
+void exhalbtc_set_chip_type(u8 chip_type)
+{
+	switch (chip_type) {
+	default:
+	case BT_2WIRE:
+	case BT_ISSC_3WIRE:
+	case BT_ACCEL:
+	case BT_RTL8756:
+		gl_bt_coexist.board_info.bt_chip_type = BTC_CHIP_UNDEF;
+		break;
+	case BT_CSR_BC4:
+		gl_bt_coexist.board_info.bt_chip_type = BTC_CHIP_CSR_BC4;
+		break;
+	case BT_CSR_BC8:
+		gl_bt_coexist.board_info.bt_chip_type = BTC_CHIP_CSR_BC8;
+		break;
+	case BT_RTL8723A:
+		gl_bt_coexist.board_info.bt_chip_type = BTC_CHIP_RTL8723A;
+		break;
+	case BT_RTL8821:
+		gl_bt_coexist.board_info.bt_chip_type = BTC_CHIP_RTL8821;
+		break;
+	case BT_RTL8723B:
+		gl_bt_coexist.board_info.bt_chip_type = BTC_CHIP_RTL8723B;
+		break;
+	}
+}
+
+void exhalbtc_set_ant_num(u8 type, u8 ant_num)
+{
+	if (BT_COEX_ANT_TYPE_PG == type) {
+		gl_bt_coexist.board_info.pg_ant_num = ant_num;
+		gl_bt_coexist.board_info.btdm_ant_num = ant_num;
+	} else if (BT_COEX_ANT_TYPE_ANTDIV == type) {
+		gl_bt_coexist.board_info.btdm_ant_num = ant_num;
+	}
+}
+
+void exhalbtc_display_bt_coex_info(struct btc_coexist *btcoexist)
+{
+	struct rtl_priv *rtlpriv = btcoexist->adapter;
+	struct rtl_hal *rtlhal = rtl_hal(rtlpriv);
+	if (!halbtc_is_bt_coexist_available(btcoexist))
+		return;
+
+	if (rtlhal->hw_type == HARDWARE_TYPE_RTL8723BE)
+		ex_halbtc8723b2ant_display_coex_info(btcoexist);
+}
diff --git a/drivers/net/wireless/rtlwifi/btcoexist/halbtcoutsrc.h b/drivers/net/wireless/rtlwifi/btcoexist/halbtcoutsrc.h
new file mode 100644
index 000000000000..871fc3c6d559
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/btcoexist/halbtcoutsrc.h
@@ -0,0 +1,559 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2012  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+#ifndef	__HALBTC_OUT_SRC_H__
+#define __HALBTC_OUT_SRC_H__
+
+#include	"../wifi.h"
+
+#define		NORMAL_EXEC				false
+#define		FORCE_EXEC				true
+
+#define		BTC_RF_A				RF90_PATH_A
+#define		BTC_RF_B				RF90_PATH_B
+#define		BTC_RF_C				RF90_PATH_C
+#define		BTC_RF_D				RF90_PATH_D
+
+#define		BTC_SMSP				SINGLEMAC_SINGLEPHY
+#define		BTC_DMDP				DUALMAC_DUALPHY
+#define		BTC_DMSP				DUALMAC_SINGLEPHY
+#define		BTC_MP_UNKNOWN				0xff
+
+#define		IN
+#define		OUT
+
+#define		BT_TMP_BUF_SIZE				100
+
+#define		BT_COEX_ANT_TYPE_PG			0
+#define		BT_COEX_ANT_TYPE_ANTDIV			1
+#define		BT_COEX_ANT_TYPE_DETECTED		2
+
+#define		BTC_MIMO_PS_STATIC			0
+#define		BTC_MIMO_PS_DYNAMIC			1
+
+#define		BTC_RATE_DISABLE			0
+#define		BTC_RATE_ENABLE				1
+
+#define		BTC_ANT_PATH_WIFI			0
+#define		BTC_ANT_PATH_BT				1
+#define		BTC_ANT_PATH_PTA			2
+
+enum btc_chip_interface {
+	BTC_INTF_UNKNOWN	= 0,
+	BTC_INTF_PCI		= 1,
+	BTC_INTF_USB		= 2,
+	BTC_INTF_SDIO		= 3,
+	BTC_INTF_GSPI		= 4,
+	BTC_INTF_MAX
+};
+
+enum BTC_CHIP_TYPE {
+	BTC_CHIP_UNDEF		= 0,
+	BTC_CHIP_CSR_BC4	= 1,
+	BTC_CHIP_CSR_BC8	= 2,
+	BTC_CHIP_RTL8723A	= 3,
+	BTC_CHIP_RTL8821	= 4,
+	BTC_CHIP_RTL8723B	= 5,
+	BTC_CHIP_MAX
+};
+
+enum BTC_MSG_TYPE {
+	BTC_MSG_INTERFACE	= 0x0,
+	BTC_MSG_ALGORITHM	= 0x1,
+	BTC_MSG_MAX
+};
+extern u32 btc_dbg_type[];
+
+/* following is for BTC_MSG_INTERFACE */
+#define		INTF_INIT				BIT0
+#define		INTF_NOTIFY				BIT2
+
+/* following is for BTC_ALGORITHM */
+#define		ALGO_BT_RSSI_STATE			BIT0
+#define		ALGO_WIFI_RSSI_STATE			BIT1
+#define		ALGO_BT_MONITOR				BIT2
+#define		ALGO_TRACE				BIT3
+#define		ALGO_TRACE_FW				BIT4
+#define		ALGO_TRACE_FW_DETAIL			BIT5
+#define		ALGO_TRACE_FW_EXEC			BIT6
+#define		ALGO_TRACE_SW				BIT7
+#define		ALGO_TRACE_SW_DETAIL			BIT8
+#define		ALGO_TRACE_SW_EXEC			BIT9
+
+#define		BT_COEX_ANT_TYPE_PG			0
+#define		BT_COEX_ANT_TYPE_ANTDIV			1
+#define		BT_COEX_ANT_TYPE_DETECTED		2
+#define		BTC_MIMO_PS_STATIC			0
+#define		BTC_MIMO_PS_DYNAMIC			1
+#define		BTC_RATE_DISABLE			0
+#define		BTC_RATE_ENABLE				1
+#define		BTC_ANT_PATH_WIFI			0
+#define		BTC_ANT_PATH_BT				1
+#define		BTC_ANT_PATH_PTA			2
+
+
+#define	CL_SPRINTF	snprintf
+#define	CL_PRINTF	printk
+
+#define	BTC_PRINT(dbgtype, dbgflag, printstr, ...)		\
+	do {							\
+		if (unlikely(btc_dbg_type[dbgtype] & dbgflag)) {\
+			printk(printstr, ##__VA_ARGS__);	\
+		}						\
+	} while (0)
+
+#define	BTC_PRINT_F(dbgtype, dbgflag, printstr, ...)		\
+	do {							\
+		if (unlikely(btc_dbg_type[dbgtype] & dbgflag)) {\
+			pr_info("%s: ", __func__);	\
+			printk(printstr, ##__VA_ARGS__);	\
+		}						\
+	} while (0)
+
+#define	BTC_PRINT_ADDR(dbgtype, dbgflag, printstr, _ptr)	\
+	do {							\
+		if (unlikely(btc_dbg_type[dbgtype] & dbgflag)) {	\
+			int __i;				\
+			u8 *__ptr = (u8 *)_ptr;			\
+			printk printstr;			\
+			for (__i = 0; __i < 6; __i++)		\
+				printk("%02X%s", __ptr[__i], (__i == 5) ? \
+				       "" : "-");		\
+			pr_info("\n");				\
+		}						\
+	} while (0)
+
+#define BTC_PRINT_DATA(dbgtype, dbgflag, _titlestring, _hexdata, _hexdatalen) \
+	do {								\
+		if (unlikely(btc_dbg_type[dbgtype] & dbgflag))	{	\
+			int __i;					\
+			u8 *__ptr = (u8 *)_hexdata;			\
+			printk(_titlestring);				\
+			for (__i = 0; __i < (int)_hexdatalen; __i++) {	\
+				printk("%02X%s", __ptr[__i], (((__i + 1) % 4) \
+							== 0) ? "  " : " ");\
+				if (((__i + 1) % 16) == 0)		\
+					printk("\n");			\
+			}						\
+			pr_debug("\n");					\
+		}							\
+	} while (0)
+
+#define BTC_ANT_PATH_WIFI	0
+#define BTC_ANT_PATH_BT		1
+#define BTC_ANT_PATH_PTA	2
+
+enum btc_power_save_type {
+	BTC_PS_WIFI_NATIVE = 0,
+	BTC_PS_LPS_ON = 1,
+	BTC_PS_LPS_OFF = 2,
+	BTC_PS_LPS_MAX
+};
+
+struct btc_board_info {
+	/* The following is some board information */
+	u8 bt_chip_type;
+	u8 pg_ant_num;	/* pg ant number */
+	u8 btdm_ant_num;	/* ant number for btdm */
+	u8 btdm_ant_pos;
+	bool bt_exist;
+};
+
+enum btc_dbg_opcode {
+	BTC_DBG_SET_COEX_NORMAL = 0x0,
+	BTC_DBG_SET_COEX_WIFI_ONLY = 0x1,
+	BTC_DBG_SET_COEX_BT_ONLY = 0x2,
+	BTC_DBG_MAX
+};
+
+enum btc_rssi_state {
+	BTC_RSSI_STATE_HIGH = 0x0,
+	BTC_RSSI_STATE_MEDIUM = 0x1,
+	BTC_RSSI_STATE_LOW = 0x2,
+	BTC_RSSI_STATE_STAY_HIGH = 0x3,
+	BTC_RSSI_STATE_STAY_MEDIUM = 0x4,
+	BTC_RSSI_STATE_STAY_LOW = 0x5,
+	BTC_RSSI_MAX
+};
+
+enum btc_wifi_role {
+	BTC_ROLE_STATION = 0x0,
+	BTC_ROLE_AP = 0x1,
+	BTC_ROLE_IBSS = 0x2,
+	BTC_ROLE_HS_MODE = 0x3,
+	BTC_ROLE_MAX
+};
+
+enum btc_wifi_bw_mode {
+	BTC_WIFI_BW_LEGACY = 0x0,
+	BTC_WIFI_BW_HT20 = 0x1,
+	BTC_WIFI_BW_HT40 = 0x2,
+	BTC_WIFI_BW_MAX
+};
+
+enum btc_wifi_traffic_dir {
+	BTC_WIFI_TRAFFIC_TX = 0x0,
+	BTC_WIFI_TRAFFIC_RX = 0x1,
+	BTC_WIFI_TRAFFIC_MAX
+};
+
+enum btc_wifi_pnp {
+	BTC_WIFI_PNP_WAKE_UP = 0x0,
+	BTC_WIFI_PNP_SLEEP = 0x1,
+	BTC_WIFI_PNP_MAX
+};
+
+
+enum btc_get_type {
+	/* type bool */
+	BTC_GET_BL_HS_OPERATION,
+	BTC_GET_BL_HS_CONNECTING,
+	BTC_GET_BL_WIFI_CONNECTED,
+	BTC_GET_BL_WIFI_BUSY,
+	BTC_GET_BL_WIFI_SCAN,
+	BTC_GET_BL_WIFI_LINK,
+	BTC_GET_BL_WIFI_DHCP,
+	BTC_GET_BL_WIFI_SOFTAP_IDLE,
+	BTC_GET_BL_WIFI_SOFTAP_LINKING,
+	BTC_GET_BL_WIFI_IN_EARLY_SUSPEND,
+	BTC_GET_BL_WIFI_ROAM,
+	BTC_GET_BL_WIFI_4_WAY_PROGRESS,
+	BTC_GET_BL_WIFI_UNDER_5G,
+	BTC_GET_BL_WIFI_AP_MODE_ENABLE,
+	BTC_GET_BL_WIFI_ENABLE_ENCRYPTION,
+	BTC_GET_BL_WIFI_UNDER_B_MODE,
+	BTC_GET_BL_EXT_SWITCH,
+
+	/* type s4Byte */
+	BTC_GET_S4_WIFI_RSSI,
+	BTC_GET_S4_HS_RSSI,
+
+	/* type u32 */
+	BTC_GET_U4_WIFI_BW,
+	BTC_GET_U4_WIFI_TRAFFIC_DIRECTION,
+	BTC_GET_U4_WIFI_FW_VER,
+	BTC_GET_U4_BT_PATCH_VER,
+
+	/* type u1Byte */
+	BTC_GET_U1_WIFI_DOT11_CHNL,
+	BTC_GET_U1_WIFI_CENTRAL_CHNL,
+	BTC_GET_U1_WIFI_HS_CHNL,
+	BTC_GET_U1_MAC_PHY_MODE,
+
+	/* for 1Ant */
+	BTC_GET_U1_LPS_MODE,
+	BTC_GET_BL_BT_SCO_BUSY,
+
+	/* for test mode */
+	BTC_GET_DRIVER_TEST_CFG,
+	BTC_GET_MAX
+};
+
+
+enum btc_set_type {
+	/* type bool */
+	BTC_SET_BL_BT_DISABLE,
+	BTC_SET_BL_BT_TRAFFIC_BUSY,
+	BTC_SET_BL_BT_LIMITED_DIG,
+	BTC_SET_BL_FORCE_TO_ROAM,
+	BTC_SET_BL_TO_REJ_AP_AGG_PKT,
+	BTC_SET_BL_BT_CTRL_AGG_SIZE,
+	BTC_SET_BL_INC_SCAN_DEV_NUM,
+
+	/* type u1Byte */
+	BTC_SET_U1_RSSI_ADJ_VAL_FOR_AGC_TABLE_ON,
+	BTC_SET_U1_RSSI_ADJ_VAL_FOR_1ANT_COEX_TYPE,
+	BTC_SET_UI_SCAN_SIG_COMPENSATION,
+	BTC_SET_U1_AGG_BUF_SIZE,
+
+	/* type trigger some action */
+	BTC_SET_ACT_GET_BT_RSSI,
+	BTC_SET_ACT_AGGREGATE_CTRL,
+
+	/********* for 1Ant **********/
+	/* type bool */
+	BTC_SET_BL_BT_SCO_BUSY,
+	/* type u1Byte */
+	BTC_SET_U1_1ANT_LPS,
+	BTC_SET_U1_1ANT_RPWM,
+	/* type trigger some action */
+	BTC_SET_ACT_LEAVE_LPS,
+	BTC_SET_ACT_ENTER_LPS,
+	BTC_SET_ACT_NORMAL_LPS,
+	BTC_SET_ACT_INC_FORCE_EXEC_PWR_CMD_CNT,
+	BTC_SET_ACT_DISABLE_LOW_POWER,
+	BTC_SET_ACT_UPDATE_ra_mask,
+	BTC_SET_ACT_SEND_MIMO_PS,
+	/* BT Coex related */
+	BTC_SET_ACT_CTRL_BT_INFO,
+	BTC_SET_ACT_CTRL_BT_COEX,
+	/***************************/
+	BTC_SET_MAX
+};
+
+enum btc_dbg_disp_type {
+	BTC_DBG_DISP_COEX_STATISTICS = 0x0,
+	BTC_DBG_DISP_BT_LINK_INFO = 0x1,
+	BTC_DBG_DISP_BT_FW_VER = 0x2,
+	BTC_DBG_DISP_FW_PWR_MODE_CMD = 0x3,
+	BTC_DBG_DISP_MAX
+};
+
+enum btc_notify_type_ips {
+	BTC_IPS_LEAVE = 0x0,
+	BTC_IPS_ENTER = 0x1,
+	BTC_IPS_MAX
+};
+
+enum btc_notify_type_lps {
+	BTC_LPS_DISABLE = 0x0,
+	BTC_LPS_ENABLE = 0x1,
+	BTC_LPS_MAX
+};
+
+enum btc_notify_type_scan {
+	BTC_SCAN_FINISH = 0x0,
+	BTC_SCAN_START = 0x1,
+	BTC_SCAN_MAX
+};
+
+enum btc_notify_type_associate {
+	BTC_ASSOCIATE_FINISH = 0x0,
+	BTC_ASSOCIATE_START = 0x1,
+	BTC_ASSOCIATE_MAX
+};
+
+enum btc_notify_type_media_status {
+	BTC_MEDIA_DISCONNECT = 0x0,
+	BTC_MEDIA_CONNECT = 0x1,
+	BTC_MEDIA_MAX
+};
+
+enum btc_notify_type_special_packet {
+	BTC_PACKET_UNKNOWN = 0x0,
+	BTC_PACKET_DHCP = 0x1,
+	BTC_PACKET_ARP = 0x2,
+	BTC_PACKET_EAPOL = 0x3,
+	BTC_PACKET_MAX
+};
+
+enum btc_notify_type_stack_operation {
+	BTC_STACK_OP_NONE = 0x0,
+	BTC_STACK_OP_INQ_PAGE_PAIR_START = 0x1,
+	BTC_STACK_OP_INQ_PAGE_PAIR_FINISH = 0x2,
+	BTC_STACK_OP_MAX
+};
+
+
+typedef u8 (*bfp_btc_r1)(void *btc_context, u32 reg_addr);
+
+typedef u16 (*bfp_btc_r2)(void *btc_context, u32 reg_addr);
+
+typedef u32 (*bfp_btc_r4)(void *btc_context, u32 reg_addr);
+
+typedef void (*bfp_btc_w1)(void *btc_context, u32 reg_addr, u8 data);
+
+typedef void (*bfp_btc_w1_bit_mak)(void *btc_context, u32 reg_addr,
+				   u32 bit_mask, u8 data1b);
+
+typedef void (*bfp_btc_w2)(void *btc_context, u32 reg_addr, u16 data);
+
+typedef void (*bfp_btc_w4)(void *btc_context, u32 reg_addr, u32 data);
+
+typedef void (*bfp_btc_wr_1byte_bit_mask)(void *btc_context, u32 reg_addr,
+					  u8 bit_mask, u8 data);
+
+typedef void (*bfp_btc_set_bb_reg)(void *btc_context, u32 reg_addr,
+				   u32 bit_mask, u32 data);
+
+typedef u32 (*bfp_btc_get_bb_reg)(void *btc_context, u32 reg_addr,
+				  u32 bit_mask);
+
+typedef void (*bfp_btc_set_rf_reg)(void *btc_context, u8 rf_path, u32 reg_addr,
+				   u32 bit_mask, u32 data);
+
+typedef u32 (*bfp_btc_get_rf_reg)(void *btc_context, u8 rf_path,
+				  u32 reg_addr, u32 bit_mask);
+
+typedef void (*bfp_btc_fill_h2c)(void *btc_context, u8 element_id,
+				 u32 cmd_len, u8 *cmd_buffer);
+
+typedef	bool (*bfp_btc_get)(void *btcoexist, u8 get_type, void *out_buf);
+
+typedef	bool (*bfp_btc_set)(void *btcoexist, u8 set_type, void *in_buf);
+
+typedef void (*bfp_btc_disp_dbg_msg)(void *btcoexist, u8 disp_type);
+
+struct btc_bt_info {
+	bool bt_disabled;
+	u8 rssi_adjust_for_agc_table_on;
+	u8 rssi_adjust_for_1ant_coex_type;
+	bool bt_busy;
+	u8 agg_buf_size;
+	bool limited_dig;
+	bool reject_agg_pkt;
+	bool b_bt_ctrl_buf_size;
+	bool increase_scan_dev_num;
+	u16 bt_hci_ver;
+	u16 bt_real_fw_ver;
+	u8 bt_fw_ver;
+
+	/* the following is for 1Ant solution */
+	bool bt_ctrl_lps;
+	bool bt_pwr_save_mode;
+	bool bt_lps_on;
+	bool force_to_roam;
+	u8 force_exec_pwr_cmd_cnt;
+	u8 lps_1ant;
+	u8 rpwm_1ant;
+	u32 ra_mask;
+};
+
+struct btc_stack_info {
+	bool profile_notified;
+	u16 hci_version;	/* stack hci version */
+	u8 num_of_link;
+	bool bt_link_exist;
+	bool sco_exist;
+	bool acl_exist;
+	bool a2dp_exist;
+	bool hid_exist;
+	u8 num_of_hid;
+	bool pan_exist;
+	bool unknown_acl_exist;
+	char min_bt_rssi;
+};
+
+struct btc_statistics {
+	u32 cnt_bind;
+	u32 cnt_init_hw_config;
+	u32 cnt_init_coex_dm;
+	u32 cnt_ips_notify;
+	u32 cnt_lps_notify;
+	u32 cnt_scan_notify;
+	u32 cnt_connect_notify;
+	u32 cnt_media_status_notify;
+	u32 cnt_special_packet_notify;
+	u32 cnt_bt_info_notify;
+	u32 cnt_periodical;
+	u32 cnt_stack_operation_notify;
+	u32 cnt_dbg_ctrl;
+};
+
+struct btc_bt_link_info {
+	bool bt_link_exist;
+	bool sco_exist;
+	bool sco_only;
+	bool a2dp_exist;
+	bool a2dp_only;
+	bool hid_exist;
+	bool hid_only;
+	bool pan_exist;
+	bool pan_only;
+};
+
+enum btc_antenna_pos {
+	BTC_ANTENNA_AT_MAIN_PORT = 0x1,
+	BTC_ANTENNA_AT_AUX_PORT = 0x2,
+};
+
+struct btc_coexist {
+	/* make sure only one adapter can bind the data context  */
+	bool binded;
+	/* default adapter */
+	void *adapter;
+	struct btc_board_info board_info;
+	/* some bt info referenced by non-bt module */
+	struct btc_bt_info bt_info;
+	struct btc_stack_info stack_info;
+	enum btc_chip_interface	chip_interface;
+	struct btc_bt_link_info bt_link_info;
+
+	bool initilized;
+	bool stop_coex_dm;
+	bool manual_control;
+	u8 *cli_buf;
+	struct btc_statistics statistics;
+	u8 pwr_mode_val[10];
+
+	/* function pointers - io related */
+	bfp_btc_r1 btc_read_1byte;
+	bfp_btc_w1 btc_write_1byte;
+	bfp_btc_w1_bit_mak btc_write_1byte_bitmask;
+	bfp_btc_r2 btc_read_2byte;
+	bfp_btc_w2 btc_write_2byte;
+	bfp_btc_r4 btc_read_4byte;
+	bfp_btc_w4 btc_write_4byte;
+
+	bfp_btc_set_bb_reg btc_set_bb_reg;
+	bfp_btc_get_bb_reg btc_get_bb_reg;
+
+
+	bfp_btc_set_rf_reg btc_set_rf_reg;
+	bfp_btc_get_rf_reg btc_get_rf_reg;
+
+	bfp_btc_fill_h2c btc_fill_h2c;
+
+	bfp_btc_disp_dbg_msg btc_disp_dbg_msg;
+
+	bfp_btc_get btc_get;
+	bfp_btc_set btc_set;
+};
+
+bool halbtc_is_wifi_uplink(struct rtl_priv *adapter);
+
+extern struct btc_coexist gl_bt_coexist;
+
+bool exhalbtc_initlize_variables(struct rtl_priv *adapter);
+void exhalbtc_init_hw_config(struct btc_coexist *btcoexist);
+void exhalbtc_init_coex_dm(struct btc_coexist *btcoexist);
+void exhalbtc_ips_notify(struct btc_coexist *btcoexist, u8 type);
+void exhalbtc_lps_notify(struct btc_coexist *btcoexist, u8 type);
+void exhalbtc_scan_notify(struct btc_coexist *btcoexist, u8 type);
+void exhalbtc_connect_notify(struct btc_coexist *btcoexist, u8 action);
+void exhalbtc_mediastatus_notify(struct btc_coexist *btcoexist,
+				 enum _RT_MEDIA_STATUS media_status);
+void exhalbtc_special_packet_notify(struct btc_coexist *btcoexist, u8 pkt_type);
+void exhalbtc_bt_info_notify(struct btc_coexist *btcoexist, u8 *tmp_buf,
+			     u8 length);
+void exhalbtc_stack_operation_notify(struct btc_coexist *btcoexist, u8 type);
+void exhalbtc_halt_notify(struct btc_coexist *btcoexist);
+void exhalbtc_pnp_notify(struct btc_coexist *btcoexist, u8 pnp_state);
+void exhalbtc_periodical(struct btc_coexist *btcoexist);
+void exhalbtc_dbg_control(struct btc_coexist *btcoexist, u8 code, u8 len,
+			  u8 *data);
+void exhalbtc_stack_update_profile_info(void);
+void exhalbtc_set_hci_version(u16 hci_version);
+void exhalbtc_set_bt_patch_version(u16 bt_hci_version, u16 bt_patch_version);
+void exhalbtc_update_min_bt_rssi(char bt_rssi);
+void exhalbtc_set_bt_exist(bool bt_exist);
+void exhalbtc_set_chip_type(u8 chip_type);
+void exhalbtc_set_ant_num(u8 type, u8 ant_num);
+void exhalbtc_display_bt_coex_info(struct btc_coexist *btcoexist);
+void exhalbtc_signal_compensation(struct btc_coexist *btcoexist,
+				  u8 *rssi_wifi, u8 *rssi_bt);
+void exhalbtc_lps_leave(struct btc_coexist *btcoexist);
+void exhalbtc_low_wifi_traffic_notify(struct btc_coexist *btcoexist);
+
+#endif
diff --git a/drivers/net/wireless/rtlwifi/btcoexist/rtl_btc.c b/drivers/net/wireless/rtlwifi/btcoexist/rtl_btc.c
new file mode 100644
index 000000000000..0ab94fe4cbbe
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/btcoexist/rtl_btc.c
@@ -0,0 +1,218 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2013  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "rtl_btc.h"
+#include "halbt_precomp.h"
+
+#include <linux/vmalloc.h>
+#include <linux/module.h>
+
+static struct rtl_btc_ops rtl_btc_operation = {
+	.btc_init_variables = rtl_btc_init_variables,
+	.btc_init_hal_vars = rtl_btc_init_hal_vars,
+	.btc_init_hw_config = rtl_btc_init_hw_config,
+	.btc_ips_notify = rtl_btc_ips_notify,
+	.btc_scan_notify = rtl_btc_scan_notify,
+	.btc_connect_notify = rtl_btc_connect_notify,
+	.btc_mediastatus_notify = rtl_btc_mediastatus_notify,
+	.btc_periodical = rtl_btc_periodical,
+	.btc_halt_notify = rtl_btc_halt_notify,
+	.btc_btinfo_notify = rtl_btc_btinfo_notify,
+	.btc_is_limited_dig = rtl_btc_is_limited_dig,
+	.btc_is_disable_edca_turbo = rtl_btc_is_disable_edca_turbo,
+	.btc_is_bt_disabled = rtl_btc_is_bt_disabled,
+};
+
+void rtl_btc_init_variables(struct rtl_priv *rtlpriv)
+{
+	exhalbtc_initlize_variables(rtlpriv);
+}
+
+void rtl_btc_init_hal_vars(struct rtl_priv *rtlpriv)
+{
+	u8 ant_num;
+	u8 bt_exist;
+	u8 bt_type;
+
+	ant_num = rtl_get_hwpg_ant_num(rtlpriv);
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG,
+		 "%s, antNum is %d\n", __func__, ant_num);
+
+	bt_exist = rtl_get_hwpg_bt_exist(rtlpriv);
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG,
+		 "%s, bt_exist is %d\n", __func__, bt_exist);
+	exhalbtc_set_bt_exist(bt_exist);
+
+	bt_type = rtl_get_hwpg_bt_type(rtlpriv);
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "%s, bt_type is %d\n",
+		 __func__, bt_type);
+	exhalbtc_set_chip_type(bt_type);
+
+	exhalbtc_set_ant_num(BT_COEX_ANT_TYPE_PG, ant_num);
+}
+
+void rtl_btc_init_hw_config(struct rtl_priv *rtlpriv)
+{
+	exhalbtc_init_hw_config(&gl_bt_coexist);
+	exhalbtc_init_coex_dm(&gl_bt_coexist);
+}
+
+void rtl_btc_ips_notify(struct rtl_priv *rtlpriv, u8 type)
+{
+	exhalbtc_ips_notify(&gl_bt_coexist, type);
+}
+
+void rtl_btc_scan_notify(struct rtl_priv *rtlpriv, u8 scantype)
+{
+	exhalbtc_scan_notify(&gl_bt_coexist, scantype);
+}
+
+void rtl_btc_connect_notify(struct rtl_priv *rtlpriv, u8 action)
+{
+	exhalbtc_connect_notify(&gl_bt_coexist, action);
+}
+
+void rtl_btc_mediastatus_notify(struct rtl_priv *rtlpriv,
+				enum _RT_MEDIA_STATUS mstatus)
+{
+	exhalbtc_mediastatus_notify(&gl_bt_coexist, mstatus);
+}
+
+void rtl_btc_periodical(struct rtl_priv *rtlpriv)
+{
+	exhalbtc_periodical(&gl_bt_coexist);
+}
+
+void rtl_btc_halt_notify(void)
+{
+	exhalbtc_halt_notify(&gl_bt_coexist);
+}
+
+void rtl_btc_btinfo_notify(struct rtl_priv *rtlpriv, u8 *tmp_buf, u8 length)
+{
+	exhalbtc_bt_info_notify(&gl_bt_coexist, tmp_buf, length);
+}
+
+bool rtl_btc_is_limited_dig(struct rtl_priv *rtlpriv)
+{
+	return gl_bt_coexist.bt_info.limited_dig;
+}
+
+bool rtl_btc_is_disable_edca_turbo(struct rtl_priv *rtlpriv)
+{
+	bool bt_change_edca = false;
+	u32 cur_edca_val;
+	u32 edca_bt_hs_uplink = 0x5ea42b, edca_bt_hs_downlink = 0x5ea42b;
+	u32 edca_hs;
+	u32 edca_addr = 0x504;
+
+	cur_edca_val = rtl_read_dword(rtlpriv, edca_addr);
+	if (halbtc_is_wifi_uplink(rtlpriv)) {
+		if (cur_edca_val != edca_bt_hs_uplink) {
+			edca_hs = edca_bt_hs_uplink;
+			bt_change_edca = true;
+		}
+	} else {
+		if (cur_edca_val != edca_bt_hs_downlink) {
+			edca_hs = edca_bt_hs_downlink;
+			bt_change_edca = true;
+		}
+	}
+
+	if (bt_change_edca)
+		rtl_write_dword(rtlpriv, edca_addr, edca_hs);
+
+	return true;
+}
+
+bool rtl_btc_is_bt_disabled(struct rtl_priv *rtlpriv)
+{
+	if (gl_bt_coexist.bt_info.bt_disabled)
+		return true;
+	else
+		return false;
+}
+
+struct rtl_btc_ops *rtl_btc_get_ops_pointer(void)
+{
+	return &rtl_btc_operation;
+}
+EXPORT_SYMBOL(rtl_btc_get_ops_pointer);
+
+u8 rtl_get_hwpg_ant_num(struct rtl_priv *rtlpriv)
+{
+	u8 num;
+
+	if (rtlpriv->btcoexist.btc_info.ant_num == ANT_X2)
+		num = 2;
+	else
+		num = 1;
+
+	return num;
+}
+
+enum _RT_MEDIA_STATUS mgnt_link_status_query(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	enum _RT_MEDIA_STATUS    m_status = RT_MEDIA_DISCONNECT;
+
+	u8 bibss = (mac->opmode == NL80211_IFTYPE_ADHOC) ? 1 : 0;
+
+	if (bibss || rtlpriv->mac80211.link_state >= MAC80211_LINKED)
+		m_status = RT_MEDIA_CONNECT;
+
+	return m_status;
+}
+
+u8 rtl_get_hwpg_bt_exist(struct rtl_priv *rtlpriv)
+{
+	return rtlpriv->btcoexist.btc_info.btcoexist;
+}
+
+u8 rtl_get_hwpg_bt_type(struct rtl_priv *rtlpriv)
+{
+	return rtlpriv->btcoexist.btc_info.bt_type;
+}
+
+MODULE_AUTHOR("Page He	<page_he@realsil.com.cn>");
+MODULE_AUTHOR("Realtek WlanFAE	<wlanfae@realtek.com>");
+MODULE_AUTHOR("Larry Finger	<Larry.FInger@lwfinger.net>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Realtek 802.11n PCI wireless core");
+
+static int __init rtl_btcoexist_module_init(void)
+{
+	return 0;
+}
+
+static void __exit rtl_btcoexist_module_exit(void)
+{
+	return;
+}
+
+module_init(rtl_btcoexist_module_init);
+module_exit(rtl_btcoexist_module_exit);
diff --git a/drivers/net/wireless/rtlwifi/btcoexist/rtl_btc.h b/drivers/net/wireless/rtlwifi/btcoexist/rtl_btc.h
new file mode 100644
index 000000000000..805b22cc8fc8
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/btcoexist/rtl_btc.h
@@ -0,0 +1,52 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __RTL_BTC_H__
+#define __RTL_BTC_H__
+
+#include "halbt_precomp.h"
+
+void rtl_btc_init_variables(struct rtl_priv *rtlpriv);
+void rtl_btc_init_hal_vars(struct rtl_priv *rtlpriv);
+void rtl_btc_init_hw_config(struct rtl_priv *rtlpriv);
+void rtl_btc_ips_notify(struct rtl_priv *rtlpriv, u8 type);
+void rtl_btc_scan_notify(struct rtl_priv *rtlpriv, u8 scantype);
+void rtl_btc_connect_notify(struct rtl_priv *rtlpriv, u8 action);
+void rtl_btc_mediastatus_notify(struct rtl_priv *rtlpriv,
+				enum _RT_MEDIA_STATUS mstatus);
+void rtl_btc_periodical(struct rtl_priv *rtlpriv);
+void rtl_btc_halt_notify(void);
+void rtl_btc_btinfo_notify(struct rtl_priv *rtlpriv, u8 *tmpbuf, u8 length);
+bool rtl_btc_is_limited_dig(struct rtl_priv *rtlpriv);
+bool rtl_btc_is_disable_edca_turbo(struct rtl_priv *rtlpriv);
+bool rtl_btc_is_bt_disabled(struct rtl_priv *rtlpriv);
+
+struct rtl_btc_ops *rtl_btc_get_ops_pointer(void);
+
+u8 rtl_get_hwpg_ant_num(struct rtl_priv *rtlpriv);
+u8 rtl_get_hwpg_bt_exist(struct rtl_priv *rtlpriv);
+u8 rtl_get_hwpg_bt_type(struct rtl_priv *rtlpriv);
+enum _RT_MEDIA_STATUS mgnt_link_status_query(struct ieee80211_hw *hw);
+
+#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8723com/fw_common.c b/drivers/net/wireless/rtlwifi/rtl8723com/fw_common.c
new file mode 100644
index 000000000000..83ca4e25ee50
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8723com/fw_common.c
@@ -0,0 +1,849 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2014  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "fw_common.h"
+#include <linux/module.h>
+
+#define BEACON_PG		0 /* ->1 */
+#define PSPOLL_PG		2
+#define NULL_PG			3
+#define PROBERSP_PG		4 /* ->5 */
+
+#define TOTAL_RESERVED_PKT_LEN	768
+
+static u8 reserved_page_packet[TOTAL_RESERVED_PKT_LEN] = {
+	/* page 0 beacon */
+	0x80, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF,
+	0xFF, 0xFF, 0x00, 0xE0, 0x4C, 0x02, 0xB1, 0x78,
+	0xEC, 0x1A, 0x59, 0x0B, 0xAD, 0xD4, 0x20, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x64, 0x00, 0x10, 0x04, 0x00, 0x05, 0x54, 0x65,
+	0x73, 0x74, 0x32, 0x01, 0x08, 0x82, 0x84, 0x0B,
+	0x16, 0x24, 0x30, 0x48, 0x6C, 0x03, 0x01, 0x06,
+	0x06, 0x02, 0x00, 0x00, 0x2A, 0x01, 0x02, 0x32,
+	0x04, 0x0C, 0x12, 0x18, 0x60, 0x2D, 0x1A, 0x6C,
+	0x09, 0x03, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x3D, 0x00, 0xDD, 0x07, 0x00, 0xE0, 0x4C,
+	0x02, 0x02, 0x00, 0x00, 0xDD, 0x18, 0x00, 0x50,
+	0xF2, 0x01, 0x01, 0x00, 0x00, 0x50, 0xF2, 0x04,
+	0x01, 0x00, 0x00, 0x50, 0xF2, 0x04, 0x01, 0x00,
+
+	/* page 1 beacon */
+	0x00, 0x50, 0xF2, 0x02, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x10, 0x00, 0x28, 0x8C, 0x00, 0x12, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x81, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+
+	/* page 2  ps-poll */
+	0xA4, 0x10, 0x01, 0xC0, 0xEC, 0x1A, 0x59, 0x0B,
+	0xAD, 0xD4, 0x00, 0xE0, 0x4C, 0x02, 0xB1, 0x78,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x18, 0x00, 0x28, 0x8C, 0x00, 0x12, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+
+	/* page 3  null */
+	0x48, 0x01, 0x00, 0x00, 0xEC, 0x1A, 0x59, 0x0B,
+	0xAD, 0xD4, 0x00, 0xE0, 0x4C, 0x02, 0xB1, 0x78,
+	0xEC, 0x1A, 0x59, 0x0B, 0xAD, 0xD4, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x72, 0x00, 0x28, 0x8C, 0x00, 0x12, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+
+	/* page 4  probe_resp */
+	0x50, 0x00, 0x00, 0x00, 0x00, 0x40, 0x10, 0x10,
+	0x00, 0x03, 0x00, 0xE0, 0x4C, 0x76, 0x00, 0x42,
+	0x00, 0x40, 0x10, 0x10, 0x00, 0x03, 0x00, 0x00,
+	0x9E, 0x46, 0x15, 0x32, 0x27, 0xF2, 0x2D, 0x00,
+	0x64, 0x00, 0x00, 0x04, 0x00, 0x0C, 0x6C, 0x69,
+	0x6E, 0x6B, 0x73, 0x79, 0x73, 0x5F, 0x77, 0x6C,
+	0x61, 0x6E, 0x01, 0x04, 0x82, 0x84, 0x8B, 0x96,
+	0x03, 0x01, 0x01, 0x06, 0x02, 0x00, 0x00, 0x2A,
+	0x01, 0x00, 0x32, 0x08, 0x24, 0x30, 0x48, 0x6C,
+	0x0C, 0x12, 0x18, 0x60, 0x2D, 0x1A, 0x6C, 0x18,
+	0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x3D, 0x00, 0xDD, 0x06, 0x00, 0xE0, 0x4C, 0x02,
+	0x01, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+
+	/* page 5  probe_resp */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+};
+
+void rtl8723_enable_fw_download(struct ieee80211_hw *hw, bool enable)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8 tmp;
+
+	if (enable) {
+		tmp = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN + 1);
+		rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, tmp | 0x04);
+
+		tmp = rtl_read_byte(rtlpriv, REG_MCUFWDL);
+		rtl_write_byte(rtlpriv, REG_MCUFWDL, tmp | 0x01);
+
+		tmp = rtl_read_byte(rtlpriv, REG_MCUFWDL + 2);
+		rtl_write_byte(rtlpriv, REG_MCUFWDL + 2, tmp & 0xf7);
+	} else {
+		tmp = rtl_read_byte(rtlpriv, REG_MCUFWDL);
+		rtl_write_byte(rtlpriv, REG_MCUFWDL, tmp & 0xfe);
+
+		rtl_write_byte(rtlpriv, REG_MCUFWDL + 1, 0x00);
+	}
+}
+EXPORT_SYMBOL_GPL(rtl8723_enable_fw_download);
+
+void rtl8723_fw_block_write(struct ieee80211_hw *hw,
+			    const u8 *buffer, u32 size)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u32 blocksize = sizeof(u32);
+	u8 *bufferptr = (u8 *)buffer;
+	u32 *pu4byteptr = (u32 *)buffer;
+	u32 i, offset, blockcount, remainsize;
+
+	blockcount = size / blocksize;
+	remainsize = size % blocksize;
+
+	for (i = 0; i < blockcount; i++) {
+		offset = i * blocksize;
+		rtl_write_dword(rtlpriv, (FW_8192C_START_ADDRESS + offset),
+				*(pu4byteptr + i));
+	}
+	if (remainsize) {
+		offset = blockcount * blocksize;
+		bufferptr += offset;
+		for (i = 0; i < remainsize; i++) {
+			rtl_write_byte(rtlpriv,
+				       (FW_8192C_START_ADDRESS + offset + i),
+				       *(bufferptr + i));
+		}
+	}
+}
+EXPORT_SYMBOL_GPL(rtl8723_fw_block_write);
+
+void rtl8723_fw_page_write(struct ieee80211_hw *hw,
+			   u32 page, const u8 *buffer, u32 size)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8 value8;
+	u8 u8page = (u8) (page & 0x07);
+
+	value8 = (rtl_read_byte(rtlpriv, REG_MCUFWDL + 2) & 0xF8) | u8page;
+
+	rtl_write_byte(rtlpriv, (REG_MCUFWDL + 2), value8);
+	rtl8723_fw_block_write(hw, buffer, size);
+}
+EXPORT_SYMBOL_GPL(rtl8723_fw_page_write);
+
+static void rtl8723_fill_dummy(u8 *pfwbuf, u32 *pfwlen)
+{
+	u32 fwlen = *pfwlen;
+	u8 remain = (u8) (fwlen % 4);
+
+	remain = (remain == 0) ? 0 : (4 - remain);
+
+	while (remain > 0) {
+		pfwbuf[fwlen] = 0;
+		fwlen++;
+		remain--;
+	}
+	*pfwlen = fwlen;
+}
+
+void rtl8723_write_fw(struct ieee80211_hw *hw,
+		      enum version_8723be version,
+		      u8 *buffer, u32 size)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8 *bufferptr = (u8 *)buffer;
+	u32 pagenums, remainsize;
+	u32 page, offset;
+
+	RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD, "FW size is %d bytes,\n", size);
+
+	_rtl8723be_fill_dummy(bufferptr, &size);
+
+	pagenums = size / FW_8192C_PAGE_SIZE;
+	remainsize = size % FW_8192C_PAGE_SIZE;
+
+	if (pagenums > 8) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 "Page numbers should not greater then 8\n");
+	}
+	for (page = 0; page < pagenums; page++) {
+		offset = page * FW_8192C_PAGE_SIZE;
+		rtl8723_fw_page_write(hw, page, (bufferptr + offset),
+				      FW_8192C_PAGE_SIZE);
+	}
+	if (remainsize) {
+		offset = pagenums * FW_8192C_PAGE_SIZE;
+		page = pagenums;
+		rtl8723_fw_page_write(hw, page, (bufferptr + offset),
+				      remainsize);
+	}
+}
+EXPORT_SYMBOL_GPL(rtl8723_write_fw);
+
+void rtl8723ae_firmware_selfreset(struct ieee80211_hw *hw)
+{
+	u8 u1tmp;
+	u8 delay = 100;
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	rtl_write_byte(rtlpriv, REG_HMETFR + 3, 0x20);
+	u1tmp = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN + 1);
+
+	while (u1tmp & BIT(2)) {
+		delay--;
+		if (delay == 0)
+			break;
+		udelay(50);
+		u1tmp = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN + 1);
+	}
+	if (delay == 0) {
+		u1tmp = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN + 1);
+		rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, u1tmp&(~BIT(2)));
+	}
+}
+EXPORT_SYMBOL_GPL(rtl8723ae_firmware_selfreset);
+
+void rtl8723be_firmware_selfreset(struct ieee80211_hw *hw)
+{
+	u8 u1b_tmp;
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	u1b_tmp = rtl_read_byte(rtlpriv, REG_RSV_CTRL + 1);
+	rtl_write_byte(rtlpriv, REG_RSV_CTRL + 1, (u1b_tmp & (~BIT(0))));
+
+	u1b_tmp = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN + 1);
+	rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, (u1b_tmp & (~BIT(2))));
+	udelay(50);
+
+	u1b_tmp = rtl_read_byte(rtlpriv, REG_RSV_CTRL + 1);
+	rtl_write_byte(rtlpriv, REG_RSV_CTRL + 1, (u1b_tmp | BIT(0)));
+
+	u1b_tmp = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN + 1);
+	rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, (u1b_tmp | BIT(2)));
+
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+		 "  _8051Reset8723be(): 8051 reset success .\n");
+}
+EXPORT_SYMBOL_GPL(rtl8723be_firmware_selfreset);
+
+int rtl8723_fw_free_to_go(struct ieee80211_hw *hw, bool is_8723be)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	int err = -EIO;
+	u32 counter = 0;
+	u32 value32;
+
+	do {
+		value32 = rtl_read_dword(rtlpriv, REG_MCUFWDL);
+	} while ((counter++ < FW_8192C_POLLING_TIMEOUT_COUNT) &&
+		 (!(value32 & FWDL_CHKSUM_RPT)));
+
+	if (counter >= FW_8192C_POLLING_TIMEOUT_COUNT) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 "chksum report faill ! REG_MCUFWDL:0x%08x .\n",
+			 value32);
+		goto exit;
+	}
+	RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE,
+		 "Checksum report OK ! REG_MCUFWDL:0x%08x .\n", value32);
+
+	value32 = rtl_read_dword(rtlpriv, REG_MCUFWDL);
+	value32 |= MCUFWDL_RDY;
+	value32 &= ~WINTINI_RDY;
+	rtl_write_dword(rtlpriv, REG_MCUFWDL, value32);
+
+	if (is_8723be)
+		rtl8723be_firmware_selfreset(hw);
+	counter = 0;
+
+	do {
+		value32 = rtl_read_dword(rtlpriv, REG_MCUFWDL);
+		if (value32 & WINTINI_RDY) {
+			RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE,
+				 "Polling FW ready success!! "
+				 "REG_MCUFWDL:0x%08x .\n",
+				 value32);
+			err = 0;
+			goto exit;
+		}
+		udelay(FW_8192C_POLLING_DELAY);
+
+	} while (counter++ < FW_8192C_POLLING_TIMEOUT_COUNT);
+
+	RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+		 "Polling FW ready fail!! REG_MCUFWDL:0x%08x .\n",
+		 value32);
+
+exit:
+	return err;
+}
+EXPORT_SYMBOL_GPL(rtl8723_fw_free_to_go);
+
+int rtl8723_download_fw(struct ieee80211_hw *hw,
+			bool is_8723be)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rtl92c_firmware_header *pfwheader;
+	u8 *pfwdata;
+	u32 fwsize;
+	int err;
+	enum version_8723e version = rtlhal->version;
+
+	if (!rtlhal->pfirmware)
+		return 1;
+
+	pfwheader = (struct rtl92c_firmware_header *)rtlhal->pfirmware;
+	pfwdata = (u8 *)rtlhal->pfirmware;
+	fwsize = rtlhal->fwsize;
+	RT_TRACE(rtlpriv, COMP_FW, DBG_DMESG,
+		 "normal Firmware SIZE %d\n", fwsize);
+
+	if (IS_FW_HEADER_EXIST(pfwheader)) {
+		RT_TRACE(rtlpriv, COMP_FW, DBG_DMESG,
+			 "Firmware Version(%d), Signature(%#x), Size(%d)\n",
+			 pfwheader->version, pfwheader->signature,
+			 (int)sizeof(struct rtl92c_firmware_header));
+
+		pfwdata = pfwdata + sizeof(struct rtl92c_firmware_header);
+		fwsize = fwsize - sizeof(struct rtl92c_firmware_header);
+	}
+	if (rtl_read_byte(rtlpriv, REG_MCUFWDL) & BIT(7)) {
+		rtl_write_byte(rtlpriv, REG_MCUFWDL, 0);
+		if (is_8723be)
+			rtl8723be_firmware_selfreset(hw);
+		else
+			rtl8723ae_firmware_selfreset(hw);
+	}
+	rtl8723_enable_fw_download(hw, is_8723be);
+	rtl8723_write_fw(hw, version, pfwdata, fwsize);
+	rtl8723_enable_fw_download(hw, is_8723be);
+
+	err = rtl8723_fw_free_to_go(hw, is_8723be);
+	if (err) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 "Firmware is not ready to run!\n");
+	} else {
+		RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD,
+			 "Firmware is ready to run!\n");
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rtl8723_download_fw);
+
+bool rtl8723_check_fw_read_last_h2c(struct ieee80211_hw *hw, u8 boxnum)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8 val_hmetfr, val_mcutst_1;
+	bool result = false;
+
+	val_hmetfr = rtl_read_byte(rtlpriv, REG_HMETFR);
+	val_mcutst_1 = rtl_read_byte(rtlpriv, (REG_MCUTST_1 + boxnum));
+
+	if (((val_hmetfr >> boxnum) & BIT(0)) == 0 && val_mcutst_1 == 0)
+		result = true;
+	return result;
+}
+EXPORT_SYMBOL_GPL(rtl8723_check_fw_read_last_h2c);
+
+void rtl8723_fill_h2c_command(struct ieee80211_hw *hw, u8 element_id,
+			      u32 cmd_len, u8 *p_cmdbuffer)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	u8 boxnum;
+	u16 box_reg = 0, box_extreg = 0;
+	u8 u1b_tmp;
+	bool isfw_read = false;
+	u8 buf_index = 0;
+	bool bwrite_sucess = false;
+	u8 wait_h2c_limit = 100;
+	u8 wait_writeh2c_limit = 100;
+	u8 boxcontent[4], boxextcontent[4];
+	u32 h2c_waitcounter = 0;
+	unsigned long flag;
+	u8 idx;
+
+	RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD, "come in\n");
+
+	while (true) {
+		spin_lock_irqsave(&rtlpriv->locks.h2c_lock, flag);
+		if (rtlhal->h2c_setinprogress) {
+			RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+				 "H2C set in progress! Wait to set.."
+				 "element_id(%d).\n", element_id);
+
+			while (rtlhal->h2c_setinprogress) {
+				spin_unlock_irqrestore(&rtlpriv->locks.h2c_lock,
+						       flag);
+				h2c_waitcounter++;
+				RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+					 "Wait 100 us (%d times)...\n",
+					 h2c_waitcounter);
+				udelay(100);
+
+				if (h2c_waitcounter > 1000)
+					return;
+				spin_lock_irqsave(&rtlpriv->locks.h2c_lock,
+						  flag);
+			}
+			spin_unlock_irqrestore(&rtlpriv->locks.h2c_lock, flag);
+		} else {
+			rtlhal->h2c_setinprogress = true;
+			spin_unlock_irqrestore(&rtlpriv->locks.h2c_lock, flag);
+			break;
+		}
+	}
+	while (!bwrite_sucess) {
+		wait_writeh2c_limit--;
+		if (wait_writeh2c_limit == 0) {
+			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+				 "Write H2C fail because no trigger "
+				 "for FW INT!\n");
+			break;
+		}
+		boxnum = rtlhal->last_hmeboxnum;
+		switch (boxnum) {
+		case 0:
+			box_reg = REG_HMEBOX_0;
+			box_extreg = REG_HMEBOX_EXT_0;
+			break;
+		case 1:
+			box_reg = REG_HMEBOX_1;
+			box_extreg = REG_HMEBOX_EXT_1;
+			break;
+		case 2:
+			box_reg = REG_HMEBOX_2;
+			box_extreg = REG_HMEBOX_EXT_2;
+			break;
+		case 3:
+			box_reg = REG_HMEBOX_3;
+			box_extreg = REG_HMEBOX_EXT_3;
+			break;
+		default:
+			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+				 "switch case not processed\n");
+			break;
+		}
+		isfw_read = rtl8723_check_fw_read_last_h2c(hw, boxnum);
+		while (!isfw_read) {
+			wait_h2c_limit--;
+			if (wait_h2c_limit == 0) {
+				RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+					 "Waiting too long for FW read "
+					 "clear HMEBox(%d)!\n", boxnum);
+				break;
+			}
+			udelay(10);
+
+			isfw_read = rtl8723_check_fw_read_last_h2c(hw,
+								boxnum);
+		}
+		if (!isfw_read) {
+			RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+				 "Write H2C register BOX[%d] fail!!!!! "
+				 "Fw do not read.\n", boxnum);
+			break;
+		}
+		memset(boxcontent, 0, sizeof(boxcontent));
+		memset(boxextcontent, 0, sizeof(boxextcontent));
+		boxcontent[0] = element_id;
+		RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+			 "Write element_id box_reg(%4x) = %2x\n",
+			 box_reg, element_id);
+
+		switch (cmd_len) {
+		case 1:
+		case 2:
+		case 3:
+			/*boxcontent[0] &= ~(BIT(7));*/
+			memcpy((u8 *)(boxcontent) + 1,
+			       p_cmdbuffer + buf_index, cmd_len);
+
+			for (idx = 0; idx < 4; idx++) {
+				rtl_write_byte(rtlpriv, box_reg + idx,
+					       boxcontent[idx]);
+			}
+			break;
+		case 4:
+		case 5:
+		case 6:
+		case 7:
+			/*boxcontent[0] |= (BIT(7));*/
+			memcpy((u8 *)(boxextcontent),
+			       p_cmdbuffer + buf_index+3, cmd_len-3);
+			memcpy((u8 *)(boxcontent) + 1,
+			       p_cmdbuffer + buf_index, 3);
+
+			for (idx = 0; idx < 4; idx++) {
+				rtl_write_byte(rtlpriv, box_extreg + idx,
+					       boxextcontent[idx]);
+			}
+			for (idx = 0; idx < 4; idx++) {
+				rtl_write_byte(rtlpriv, box_reg + idx,
+					       boxcontent[idx]);
+			}
+			break;
+		default:
+			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+				 "switch case not process\n");
+			break;
+		}
+		bwrite_sucess = true;
+
+		rtlhal->last_hmeboxnum = boxnum + 1;
+		if (rtlhal->last_hmeboxnum == 4)
+			rtlhal->last_hmeboxnum = 0;
+
+		RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+			 "pHalData->last_hmeboxnum  = %d\n",
+			 rtlhal->last_hmeboxnum);
+	}
+	if (!rtlpriv) {
+		pr_err("rtlpriv bad\n");
+		return;
+	}
+	if (!rtlhal) {
+		pr_err("rtlhal bad\n");
+		return;
+	}
+	spin_lock_irqsave(&rtlpriv->locks.h2c_lock, flag);
+	rtlhal->h2c_setinprogress = false;
+	spin_unlock_irqrestore(&rtlpriv->locks.h2c_lock, flag);
+
+	RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD, "go out\n");
+}
+EXPORT_SYMBOL_GPL(rtl8723_fill_h2c_command);
+
+void rtl8723_fill_h2c_cmd(struct ieee80211_hw *hw, u8 element_id,
+			  u32 cmd_len, u8 *p_cmdbuffer)
+{
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	u32 tmp_cmdbuf[2];
+
+	if (!rtlhal->fw_ready) {
+		RT_ASSERT(false,
+			  "return H2C cmd because of Fw download fail!!!\n");
+		return;
+	}
+	memset(tmp_cmdbuf, 0, 8);
+	memcpy(tmp_cmdbuf, p_cmdbuffer, cmd_len);
+	rtl8723_fill_h2c_command(hw, element_id, cmd_len,
+				 (u8 *)&tmp_cmdbuf);
+	return;
+}
+EXPORT_SYMBOL_GPL(rtl8723_fill_h2c_cmd);
+
+void rtl8723_set_fw_joinbss_report_cmd(struct ieee80211_hw *hw, u8 mstatus)
+{
+	u8 u1_joinbssrpt_parm[1] = { 0 };
+
+	SET_H2CCMD_JOINBSSRPT_PARM_OPMODE(u1_joinbssrpt_parm, mstatus);
+
+	rtl8723_fill_h2c_cmd(hw, H2C_JOINBSSRPT, 1, u1_joinbssrpt_parm);
+}
+EXPORT_SYMBOL_GPL(rtl8723_set_fw_joinbss_report_cmd);
+
+bool rtl8723_cmd_send_packet(struct ieee80211_hw *hw,
+			     struct sk_buff *skb)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	struct rtl8192_tx_ring *ring;
+	struct rtl_tx_desc *pdesc;
+	struct sk_buff *pskb = NULL;
+	u8 own;
+	unsigned long flags;
+
+	ring = &rtlpci->tx_ring[BEACON_QUEUE];
+
+	pskb = __skb_dequeue(&ring->queue);
+	if (pskb)
+		kfree_skb(pskb);
+
+	spin_lock_irqsave(&rtlpriv->locks.irq_th_lock, flags);
+
+	pdesc = &ring->desc[0];
+	own = (u8) rtlpriv->cfg->ops->get_desc((u8 *)pdesc, true, HW_DESC_OWN);
+
+	rtlpriv->cfg->ops->fill_tx_cmddesc(hw, (u8 *)pdesc, 1, 1, skb);
+
+	__skb_queue_tail(&ring->queue, skb);
+
+	spin_unlock_irqrestore(&rtlpriv->locks.irq_th_lock, flags);
+
+	rtlpriv->cfg->ops->tx_polling(hw, BEACON_QUEUE);
+
+	return true;
+}
+EXPORT_SYMBOL_GPL(rtl8723_cmd_send_packet);
+
+void rtl8723_set_fw_rsvdpagepkt(struct ieee80211_hw *hw, bool dl_finished)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct sk_buff *skb = NULL;
+
+	u32 totalpacketlen;
+	bool rtstatus;
+	u8 u1rsvdpageloc[5] = { 0 };
+	bool dlok = false;
+
+	u8 *beacon;
+	u8 *p_pspoll;
+	u8 *nullfunc;
+	u8 *p_probersp;
+	/*---------------------------------------------------------
+	 *			(1) beacon
+	 *---------------------------------------------------------
+	 */
+	beacon = &reserved_page_packet[BEACON_PG * 128];
+	SET_80211_HDR_ADDRESS2(beacon, mac->mac_addr);
+	SET_80211_HDR_ADDRESS3(beacon, mac->bssid);
+
+	/*-------------------------------------------------------
+	 *			(2) ps-poll
+	 *-------------------------------------------------------
+	 */
+	p_pspoll = &reserved_page_packet[PSPOLL_PG * 128];
+	SET_80211_PS_POLL_AID(p_pspoll, (mac->assoc_id | 0xc000));
+	SET_80211_PS_POLL_BSSID(p_pspoll, mac->bssid);
+	SET_80211_PS_POLL_TA(p_pspoll, mac->mac_addr);
+
+	SET_H2CCMD_RSVDPAGE_LOC_PSPOLL(u1rsvdpageloc, PSPOLL_PG);
+
+	/*--------------------------------------------------------
+	 *			(3) null data
+	 *--------------------------------------------------------
+	 */
+	nullfunc = &reserved_page_packet[NULL_PG * 128];
+	SET_80211_HDR_ADDRESS1(nullfunc, mac->bssid);
+	SET_80211_HDR_ADDRESS2(nullfunc, mac->mac_addr);
+	SET_80211_HDR_ADDRESS3(nullfunc, mac->bssid);
+
+	SET_H2CCMD_RSVDPAGE_LOC_NULL_DATA(u1rsvdpageloc, NULL_PG);
+
+	/*---------------------------------------------------------
+	 *			(4) probe response
+	 *---------------------------------------------------------
+	 */
+	p_probersp = &reserved_page_packet[PROBERSP_PG * 128];
+	SET_80211_HDR_ADDRESS1(p_probersp, mac->bssid);
+	SET_80211_HDR_ADDRESS2(p_probersp, mac->mac_addr);
+	SET_80211_HDR_ADDRESS3(p_probersp, mac->bssid);
+
+	SET_H2CCMD_RSVDPAGE_LOC_PROBE_RSP(u1rsvdpageloc, PROBERSP_PG);
+
+	totalpacketlen = TOTAL_RESERVED_PKT_LEN;
+
+	RT_PRINT_DATA(rtlpriv, COMP_CMD, DBG_LOUD,
+		      "rtl8723be_set_fw_rsvdpagepkt(): "
+		      "HW_VAR_SET_TX_CMD: ALL\n",
+		      &reserved_page_packet[0], totalpacketlen);
+	RT_PRINT_DATA(rtlpriv, COMP_CMD, DBG_DMESG,
+		      "rtl8723be_set_fw_rsvdpagepkt(): "
+		      "HW_VAR_SET_TX_CMD: ALL\n", u1rsvdpageloc, 3);
+
+
+	skb = dev_alloc_skb(totalpacketlen);
+	memcpy((u8 *)skb_put(skb, totalpacketlen),
+	       &reserved_page_packet, totalpacketlen);
+
+	rtstatus = rtl8723_cmd_send_packet(hw, skb);
+
+	if (rtstatus)
+		dlok = true;
+
+	if (dlok) {
+		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+			 "Set RSVD page location to Fw.\n");
+		RT_PRINT_DATA(rtlpriv, COMP_CMD, DBG_DMESG, "H2C_RSVDPAGE:\n",
+			      u1rsvdpageloc, 3);
+		rtl8723_fill_h2c_cmd(hw, H2C_88E_RSVDPAGE,
+				     sizeof(u1rsvdpageloc), u1rsvdpageloc);
+	} else {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+			 "Set RSVD page location to Fw FAIL!!!!!!.\n");
+	}
+}
+EXPORT_SYMBOL_GPL(rtl8723_set_fw_rsvdpagepkt);
+
+/*Should check FW support p2p or not.*/
+void rtl8723_set_p2p_ctw_period_cmd(struct ieee80211_hw *hw, u8 ctwindow)
+{
+	u8 u1_ctwindow_period[1] = {ctwindow};
+
+	rtl8723_fill_h2c_cmd(hw, H2C_88E_P2P_PS_CTW_CMD, 1,
+			     u1_ctwindow_period);
+}
+EXPORT_SYMBOL_GPL(rtl8723_set_p2p_ctw_period_cmd);
+
+void rtl8723_set_p2p_ps_offload_cmd(struct ieee80211_hw *hw, u8 p2p_ps_state)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_ps_ctl *rtlps = rtl_psc(rtl_priv(hw));
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rtl_p2p_ps_info *p2pinfo = &(rtlps->p2p_ps_info);
+	struct p2p_ps_offload_t *p2p_ps_offload = &rtlhal->p2p_ps_offload;
+	u8 i;
+	u16 ctwindow;
+	u32 start_time, tsf_low;
+
+	switch (p2p_ps_state) {
+	case P2P_PS_DISABLE:
+		RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD, "P2P_PS_DISABLE\n");
+		memset(p2p_ps_offload, 0, sizeof(struct p2p_ps_offload_t *));
+		break;
+	case P2P_PS_ENABLE:
+		RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD, "P2P_PS_ENABLE\n");
+		/* update CTWindow value. */
+		if (p2pinfo->ctwindow > 0) {
+			p2p_ps_offload->ctwindow_en = 1;
+			ctwindow = p2pinfo->ctwindow;
+			rtl8723_set_p2p_ctw_period_cmd(hw, ctwindow);
+		}
+		/* hw only support 2 set of NoA */
+		for (i = 0; i < p2pinfo->noa_num; i++) {
+			/* To control the register setting
+			 * for which NOA
+			 */
+			rtl_write_byte(rtlpriv, 0x5cf, (i << 4));
+			if (i == 0)
+				p2p_ps_offload->noa0_en = 1;
+			else
+				p2p_ps_offload->noa1_en = 1;
+
+			/* config P2P NoA Descriptor Register */
+			rtl_write_dword(rtlpriv, 0x5E0,
+					p2pinfo->noa_duration[i]);
+			rtl_write_dword(rtlpriv, 0x5E4,
+					p2pinfo->noa_interval[i]);
+
+			/*Get Current TSF value */
+			tsf_low = rtl_read_dword(rtlpriv, REG_TSFTR);
+
+			start_time = p2pinfo->noa_start_time[i];
+			if (p2pinfo->noa_count_type[i] != 1) {
+				while (start_time <= (tsf_low + (50 * 1024))) {
+					start_time += p2pinfo->noa_interval[i];
+					if (p2pinfo->noa_count_type[i] != 255)
+						p2pinfo->noa_count_type[i]--;
+				}
+			}
+			rtl_write_dword(rtlpriv, 0x5E8, start_time);
+			rtl_write_dword(rtlpriv, 0x5EC,
+					p2pinfo->noa_count_type[i]);
+		}
+		if ((p2pinfo->opp_ps == 1) ||
+		    (p2pinfo->noa_num > 0)) {
+			/* rst p2p circuit */
+			rtl_write_byte(rtlpriv, REG_DUAL_TSF_RST, BIT(4));
+
+			p2p_ps_offload->offload_en = 1;
+
+			if (P2P_ROLE_GO == rtlpriv->mac80211.p2p) {
+				p2p_ps_offload->role = 1;
+				p2p_ps_offload->allstasleep = 0;
+			} else {
+				p2p_ps_offload->role = 0;
+			}
+			p2p_ps_offload->discovery = 0;
+		}
+		break;
+	case P2P_PS_SCAN:
+		RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD, "P2P_PS_SCAN\n");
+		p2p_ps_offload->discovery = 1;
+		break;
+	case P2P_PS_SCAN_DONE:
+		RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD, "P2P_PS_SCAN_DONE\n");
+		p2p_ps_offload->discovery = 0;
+		p2pinfo->p2p_ps_state = P2P_PS_ENABLE;
+		break;
+	default:
+		break;
+	}
+	rtl8723_fill_h2c_cmd(hw, H2C_88E_P2P_PS_OFFLOAD, 1,
+			     (u8 *)p2p_ps_offload);
+}
+EXPORT_SYMBOL_GPL(rtl8723_set_p2p_ps_offload_cmd);
+
+#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8723com/fw_common.h b/drivers/net/wireless/rtlwifi/rtl8723com/fw_common.h
new file mode 100644
index 000000000000..0890e5deddfa
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8723com/fw_common.h
@@ -0,0 +1,50 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2014  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __FW_COMMON_H__
+#define __FW_COMMON_H__#endif
+
+void rtl8723_enable_fw_download(struct ieee80211_hw *hw, bool enable);
+void rtl8723_fw_block_write(struct ieee80211_hw *hw,
+			    const u8 *buffer, u32 size);
+void rtl8723_fw_page_write(struct ieee80211_hw *hw,
+			   u32 page, const u8 *buffer, u32 size);
+void rtl8723_write_fw(struct ieee80211_hw *hw,
+		      enum version_8723be version,
+		      u8 *buffer, u32 size);
+int rtl8723_fw_free_to_go(struct ieee80211_hw *hw, bool is_8723be);
+int rtl8723_download_fw(struct ieee80211_hw *hw,
+			bool buse_wake_on_wlan_fw, bool is_8723be);
+bool rtl8723_check_fw_read_last_h2c(struct ieee80211_hw *hw, u8 boxnum);
+void rtl8723_fill_h2c_command(struct ieee80211_hw *hw, u8 element_id,
+			      u32 cmd_len, u8 *p_cmdbuffer);
+void rtl8723_fill_h2c_cmd(struct ieee80211_hw *hw, u8 element_id,
+			  u32 cmd_len, u8 *p_cmdbuffer);
+void rtl8723_set_fw_joinbss_report_cmd(struct ieee80211_hw *hw, u8 mstatus);
+bool rtl8723_cmd_send_packet(struct ieee80211_hw *hw,
+			     struct sk_buff *skb);
+void rtl8723_set_fw_rsvdpagepkt(struct ieee80211_hw *hw, bool dl_finished);
+void rtl8723_set_p2p_ctw_period_cmd(struct ieee80211_hw *hw, u8 ctwindow);
+void rtl8723_set_p2p_ps_offload_cmd(struct ieee80211_hw *hw, u8 p2p_ps_state);
diff --git a/drivers/net/wireless/rtlwifi/rtl8723com/phy_common.h b/drivers/net/wireless/rtlwifi/rtl8723com/phy_common.h
new file mode 100644
index 000000000000..8f451d0584df
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8723com/phy_common.h
@@ -0,0 +1,75 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2014  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __PHY_COMMON__
+#define __PHY_COMMON__
+
+u32 rtl8723_phy_query_bb_reg(struct ieee80211_hw *hw,
+			     u32 regaddr, u32 bitmask);
+void rtl8723_phy_set_bb_reg(struct ieee80211_hw *hw, u32 regaddr,
+			      u32 bitmask, u32 data);
+u32 rtl8723_phy_calculate_bit_shift(u32 bitmask);
+u32 rtl8723_phy_rf_serial_read(struct ieee80211_hw *hw,
+			       enum radio_path rfpath, u32 offset);
+void rtl8723_phy_rf_serial_write(struct ieee80211_hw *hw,
+				 enum radio_path rfpath,
+				 u32 offset, u32 data);
+u32 rtl8723_phy_query_bb_reg(struct ieee80211_hw *hw,
+			     u32 regaddr, u32 bitmask);
+u32 rtl8723_phy_calculate_bit_shift(u32 bitmask);
+void rtl8723_phy_set_bb_reg(struct ieee80211_hw *hw, u32 regaddr,
+			    u32 bitmask, u32 data);
+long rtl8723_phy_txpwr_idx_to_dbm(struct ieee80211_hw *hw,
+				  enum wireless_mode wirelessmode,
+				  u8 txpwridx);
+void rtl8723_phy_init_bb_rf_reg_def(struct ieee80211_hw *hw);
+bool rtl8723_phy_set_sw_chnl_cmdarray(struct swchnlcmd *cmdtable,
+				      u32 cmdtableidx,
+				      u32 cmdtablesz,
+				      enum swchnlcmd_id cmdid,
+				      u32 para1, u32 para2,
+				      u32 msdelay);
+void rtl8723_phy_path_a_fill_iqk_matrix(struct ieee80211_hw *hw,
+					bool iqk_ok,
+					long result[][8],
+					u8 final_candidate,
+					bool btxonly);
+void rtl8723_save_adda_registers(struct ieee80211_hw *hw, u32 *addareg,
+				 u32 *addabackup, u32 registernum);
+static void rtl8723_phy_save_mac_registers(struct ieee80211_hw *hw,
+					   u32 *macreg, u32 *macbackup);
+void rtl8723_phy_reload_adda_registers(struct ieee80211_hw *hw,
+				       u32 *addareg, u32 *addabackup,
+				       u32 regiesternum);
+void rtl8723_phy_reload_mac_registers(struct ieee80211_hw *hw,
+				      u32 *macreg, u32 *macbackup);
+void rtl8723_phy_path_adda_on(struct ieee80211_hw *hw, u32 *addareg,
+			      bool is_patha_on, bool is2t);
+void rtl8723_phy_mac_setting_calibration(struct ieee80211_hw *hw,
+					 u32 *macreg, u32 *macbackup);
+void rtl8723_phy_path_a_standby(struct ieee80211_hw *hw);
+void rtl8723_phy_pi_mode_switch(struct ieee80211_hw *hw, bool pi_mode);
+
+#endif
diff --git a/drivers/net/wireless/rtlwifi/wifi.h b/drivers/net/wireless/rtlwifi/wifi.h
index 8c647391bedf..de91c82f87fd 100644
--- a/drivers/net/wireless/rtlwifi/wifi.h
+++ b/drivers/net/wireless/rtlwifi/wifi.h
@@ -49,6 +49,7 @@
 
 #define IQK_ADDA_REG_NUM			16
 #define IQK_MAC_REG_NUM				4
+#define IQK_THRESHOLD				8
 
 #define MAX_KEY_LEN				61
 #define KEY_BUF_SIZE				5
@@ -96,6 +97,7 @@
 #define CHANNEL_MAX_NUMBER_2G		14
 #define AVG_THERMAL_NUM			8
 #define AVG_THERMAL_NUM_88E		4
+#define AVG_THERMAL_NUM_8723BE		4
 #define MAX_TID_COUNT			9
 
 /* for early mode */
@@ -115,6 +117,8 @@ struct txpower_info_2g {
 	u8 ofdm_diff[MAX_RF_PATH][MAX_TX_COUNT];
 	u8 bw20_diff[MAX_RF_PATH][MAX_TX_COUNT];
 	u8 bw40_diff[MAX_RF_PATH][MAX_TX_COUNT];
+	u8 bw80_diff[MAX_RF_PATH][MAX_TX_COUNT];
+	u8 bw160_diff[MAX_RF_PATH][MAX_TX_COUNT];
 };
 
 struct txpower_info_5g {
@@ -158,6 +162,7 @@ enum hardware_type {
 	HARDWARE_TYPE_RTL8192DU,
 	HARDWARE_TYPE_RTL8723AE,
 	HARDWARE_TYPE_RTL8723U,
+	HARDWARE_TYPE_RTL8723BE,
 	HARDWARE_TYPE_RTL8188EE,
 
 	/* keep it last */
@@ -1986,6 +1991,44 @@ struct rtl_global_var {
 	spinlock_t glb_list_lock;
 };
 
+struct rtl_btc_info {
+	u8 bt_type;
+	u8 btcoexist;
+	u8 ant_num;
+};
+
+struct rtl_bt_coexist {
+	struct rtl_btc_ops *btc_ops;
+	struct rtl_btc_info btc_info;
+};
+
+struct rtl_btc_ops {
+	void (*btc_init_variables) (struct rtl_priv *rtlpriv);
+	void (*btc_init_hal_vars) (struct rtl_priv *rtlpriv);
+	void (*btc_init_hw_config) (struct rtl_priv *rtlpriv);
+	void (*btc_ips_notify) (struct rtl_priv *rtlpriv, u8 type);
+	void (*btc_scan_notify) (struct rtl_priv *rtlpriv, u8 scantype);
+	void (*btc_connect_notify) (struct rtl_priv *rtlpriv, u8 action);
+	void (*btc_mediastatus_notify) (struct rtl_priv *rtlpriv,
+					enum _RT_MEDIA_STATUS mstatus);
+	void (*btc_periodical) (struct rtl_priv *rtlpriv);
+	void (*btc_halt_notify) (void);
+	void (*btc_btinfo_notify) (struct rtl_priv *rtlpriv,
+				   u8 *tmp_buf, u8 length);
+	bool (*btc_is_limited_dig) (struct rtl_priv *rtlpriv);
+	bool (*btc_is_disable_edca_turbo) (struct rtl_priv *rtlpriv);
+	bool (*btc_is_bt_disabled) (struct rtl_priv *rtlpriv);
+};
+
+struct proxim {
+	bool proxim_on;
+
+	void *proximity_priv;
+	int (*proxim_rx)(struct ieee80211_hw *hw, struct rtl_stats *status,
+			 struct sk_buff *skb);
+	u8  (*proxim_get_var)(struct ieee80211_hw *hw, u8 type);
+};
+
 struct rtl_priv {
 	struct ieee80211_hw *hw;
 	struct completion firmware_loading_complete;
@@ -2048,6 +2091,20 @@ struct rtl_priv {
 	bool enter_ps;	/* true when entering PS */
 	u8 rate_mask[5];
 
+	/* intel Proximity, should be alloc mem
+	 * in intel Proximity module and can only
+	 * be used in intel Proximity mode
+	 */
+	struct proxim proximity;
+
+	/*for bt coexist use*/
+	struct rtl_bt_coexist btcoexist;
+
+	/* separate 92ee from other ICs,
+	 * 92ee use new trx flow.
+	 */
+	bool use_new_trx_flow;
+
 	/*This must be the last item so
 	   that it points to the data allocated
 	   beyond  this structure like:
@@ -2079,6 +2136,9 @@ enum bt_co_type {
 	BT_CSR_BC8 = 4,
 	BT_RTL8756 = 5,
 	BT_RTL8723A = 6,
+	BT_RTL8821 = 7,
+	BT_RTL8723B = 8,
+	BT_RTL8192E = 9,
 };
 
 enum bt_cur_state {
-- 
cgit v1.2.2


From 2cddad3c737a35118151ec930fb43a710b3646d2 Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Fri, 28 Feb 2014 15:16:46 -0600
Subject: rtlwifi: Prepare existing drivers for new driver

A driver for the RTL8723BE will soon be added. This patch adds the
necessary parts to the common headers, and modifies the existing
drivers for those changes.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtlwifi/core.c          |  12 +-
 drivers/net/wireless/rtlwifi/pci.c           |   2 +-
 drivers/net/wireless/rtlwifi/pci.h           |   4 +
 drivers/net/wireless/rtlwifi/rtl8188ee/dm.c  |   6 +-
 drivers/net/wireless/rtlwifi/rtl8188ee/hw.c  |  18 +-
 drivers/net/wireless/rtlwifi/rtl8188ee/phy.c |   2 +-
 drivers/net/wireless/rtlwifi/rtl8192ce/hw.c  |  12 +-
 drivers/net/wireless/rtlwifi/rtl8192cu/hw.c  |  12 +-
 drivers/net/wireless/rtlwifi/rtl8192de/hw.c  |   2 +-
 drivers/net/wireless/rtlwifi/rtl8192se/hw.c  |   2 +-
 drivers/net/wireless/rtlwifi/rtl8723ae/hw.c  |  28 +--
 drivers/net/wireless/rtlwifi/rtl8723ae/trx.h |   6 -
 drivers/net/wireless/rtlwifi/usb.c           |   2 +-
 drivers/net/wireless/rtlwifi/wifi.h          | 250 +++++++++++++++++----------
 14 files changed, 215 insertions(+), 143 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtlwifi/core.c b/drivers/net/wireless/rtlwifi/core.c
index 6df4df090b73..724b830fe429 100644
--- a/drivers/net/wireless/rtlwifi/core.c
+++ b/drivers/net/wireless/rtlwifi/core.c
@@ -746,6 +746,11 @@ static void rtl_op_bss_info_changed(struct ieee80211_hw *hw,
 				rtlpriv->cfg->ops->linked_set_reg(hw);
 			rcu_read_lock();
 			sta = ieee80211_find_sta(vif, (u8 *)bss_conf->bssid);
+			if (!sta) {
+				pr_err("ieee80211_find_sta returned NULL\n");
+				rcu_read_unlock();
+				goto out;
+			}
 
 			if (vif->type == NL80211_IFTYPE_STATION && sta)
 				rtlpriv->cfg->ops->update_rate_tbl(hw, sta, 0);
@@ -900,7 +905,7 @@ static void rtl_op_bss_info_changed(struct ieee80211_hw *hw,
 
 			mac->basic_rates = basic_rates;
 			rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_BASIC_RATE,
-					(u8 *) (&basic_rates));
+					(u8 *)(&basic_rates));
 		}
 		rcu_read_unlock();
 	}
@@ -914,6 +919,11 @@ static void rtl_op_bss_info_changed(struct ieee80211_hw *hw,
 		if (bss_conf->assoc) {
 			if (ppsc->fwctrl_lps) {
 				u8 mstatus = RT_MEDIA_CONNECT;
+				u8 keep_alive = 10;
+				rtlpriv->cfg->ops->set_hw_reg(hw,
+						 HW_VAR_KEEP_ALIVE,
+						 (u8 *)(&keep_alive));
+
 				rtlpriv->cfg->ops->set_hw_reg(hw,
 						      HW_VAR_H2C_FW_JOINBSSRPT,
 						      &mstatus);
diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c
index d7aa165fe677..257726860a43 100644
--- a/drivers/net/wireless/rtlwifi/pci.c
+++ b/drivers/net/wireless/rtlwifi/pci.c
@@ -1066,7 +1066,7 @@ static void _rtl_pci_init_struct(struct ieee80211_hw *hw,
 	mac->current_ampdu_factor = 3;
 
 	/*QOS*/
-	rtlpci->acm_method = eAcmWay2_SW;
+	rtlpci->acm_method = EACMWAY2_SW;
 
 	/*task */
 	tasklet_init(&rtlpriv->works.irq_tasklet,
diff --git a/drivers/net/wireless/rtlwifi/pci.h b/drivers/net/wireless/rtlwifi/pci.h
index d3262ec45d23..2a3333523ac4 100644
--- a/drivers/net/wireless/rtlwifi/pci.h
+++ b/drivers/net/wireless/rtlwifi/pci.h
@@ -199,6 +199,10 @@ struct rtl_pci {
 
 	u16 shortretry_limit;
 	u16 longretry_limit;
+
+	/* MSI support */
+	bool msi_support;
+	bool using_msi;
 };
 
 struct mp_adapter {
diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/dm.c b/drivers/net/wireless/rtlwifi/rtl8188ee/dm.c
index a6184b6e1d57..97bc9aa5e1d1 100644
--- a/drivers/net/wireless/rtlwifi/rtl8188ee/dm.c
+++ b/drivers/net/wireless/rtlwifi/rtl8188ee/dm.c
@@ -235,7 +235,7 @@ void rtl88e_dm_txpower_track_adjust(struct ieee80211_hw *hw,
 	u8 pwr_val = 0;
 	u8 cck_base = rtldm->swing_idx_cck_base;
 	u8 cck_val = rtldm->swing_idx_cck;
-	u8 ofdm_base = rtldm->swing_idx_ofdm_base;
+	u8 ofdm_base = rtldm->swing_idx_ofdm_base[0];
 	u8 ofdm_val = rtlpriv->dm.swing_idx_ofdm[RF90_PATH_A];
 
 	if (type == 0) {
@@ -726,7 +726,7 @@ static void rtl88e_dm_pwdb_monitor(struct ieee80211_hw *hw)
 	static u64 last_rx;
 	long tmp_entry_max_pwdb = 0, tmp_entry_min_pwdb = 0xff;
 
-	if (rtlhal->oem_id == RT_CID_819x_HP) {
+	if (rtlhal->oem_id == RT_CID_819X_HP) {
 		u64 cur_txok_cnt = 0;
 		u64 cur_rxok_cnt = 0;
 		cur_txok_cnt = rtlpriv->stats.txbytesunicast - last_txok;
@@ -912,7 +912,7 @@ static void rtl88e_dm_txpower_tracking_callback_thermalmeter(struct ieee80211_hw
 	for (i = 0; i < OFDM_TABLE_LENGTH; i++) {
 		if (ele_d == (ofdmswing_table[i] & MASKOFDM_D)) {
 			ofdm_old[0] = (u8) i;
-			rtldm->swing_idx_ofdm_base = (u8)i;
+			rtldm->swing_idx_ofdm_base[0] = (u8)i;
 			RT_TRACE(rtlpriv, COMP_POWER_TRACKING, DBG_LOUD,
 				 "Initial pathA ele_d reg0x%x = 0x%lx, ofdm_index = 0x%x\n",
 				 ROFDM0_XATXIQIMBAL,
diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/hw.c b/drivers/net/wireless/rtlwifi/rtl8188ee/hw.c
index ce2226cd2e4f..d608d75ff6ff 100644
--- a/drivers/net/wireless/rtlwifi/rtl8188ee/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8188ee/hw.c
@@ -509,7 +509,7 @@ void rtl88ee_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 		u8 e_aci = *((u8 *)val);
 		rtl88e_dm_init_edca_turbo(hw);
 
-		if (rtlpci->acm_method != eAcmWay2_SW)
+		if (rtlpci->acm_method != EACMWAY2_SW)
 			rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_ACM_CTRL,
 						      (u8 *)(&e_aci));
 		break; }
@@ -1097,7 +1097,7 @@ int rtl88ee_hw_init(struct ieee80211_hw *hw)
 	if (ppsc->rfpwr_state == ERFON) {
 		if ((rtlefuse->antenna_div_type == CGCS_RX_HW_ANTDIV) ||
 		    ((rtlefuse->antenna_div_type == CG_TRX_HW_ANTDIV) &&
-		    (rtlhal->oem_id == RT_CID_819x_HP))) {
+		    (rtlhal->oem_id == RT_CID_819X_HP))) {
 			rtl88e_phy_set_rfpath_switch(hw, true);
 			rtlpriv->dm.fat_table.rx_idle_ant = MAIN_ANT;
 		} else {
@@ -1873,15 +1873,15 @@ static void _rtl88ee_read_adapter_info(struct ieee80211_hw *hw)
 		case EEPROM_CID_DEFAULT:
 			if (rtlefuse->eeprom_did == 0x8179) {
 				if (rtlefuse->eeprom_svid == 0x1025) {
-					rtlhal->oem_id = RT_CID_819x_Acer;
+					rtlhal->oem_id = RT_CID_819X_ACER;
 				} else if ((rtlefuse->eeprom_svid == 0x10EC &&
 					    rtlefuse->eeprom_smid == 0x0179) ||
 					    (rtlefuse->eeprom_svid == 0x17AA &&
 					    rtlefuse->eeprom_smid == 0x0179)) {
-					rtlhal->oem_id = RT_CID_819x_Lenovo;
+					rtlhal->oem_id = RT_CID_819X_LENOVO;
 				} else if (rtlefuse->eeprom_svid == 0x103c &&
 					 rtlefuse->eeprom_smid == 0x197d) {
-					rtlhal->oem_id = RT_CID_819x_HP;
+					rtlhal->oem_id = RT_CID_819X_HP;
 				} else {
 					rtlhal->oem_id = RT_CID_DEFAULT;
 				}
@@ -1893,7 +1893,7 @@ static void _rtl88ee_read_adapter_info(struct ieee80211_hw *hw)
 			rtlhal->oem_id = RT_CID_TOSHIBA;
 			break;
 		case EEPROM_CID_QMI:
-			rtlhal->oem_id = RT_CID_819x_QMI;
+			rtlhal->oem_id = RT_CID_819X_QMI;
 			break;
 		case EEPROM_CID_WHQL:
 		default:
@@ -1912,14 +1912,14 @@ static void _rtl88ee_hal_customized_behavior(struct ieee80211_hw *hw)
 	pcipriv->ledctl.led_opendrain = true;
 
 	switch (rtlhal->oem_id) {
-	case RT_CID_819x_HP:
+	case RT_CID_819X_HP:
 		pcipriv->ledctl.led_opendrain = true;
 		break;
-	case RT_CID_819x_Lenovo:
+	case RT_CID_819X_LENOVO:
 	case RT_CID_DEFAULT:
 	case RT_CID_TOSHIBA:
 	case RT_CID_CCX:
-	case RT_CID_819x_Acer:
+	case RT_CID_819X_ACER:
 	case RT_CID_WHQL:
 	default:
 		break;
diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/phy.c b/drivers/net/wireless/rtlwifi/rtl8188ee/phy.c
index d67f9c731cc4..54d4ec2dc26b 100644
--- a/drivers/net/wireless/rtlwifi/rtl8188ee/phy.c
+++ b/drivers/net/wireless/rtlwifi/rtl8188ee/phy.c
@@ -1002,7 +1002,7 @@ bool rtl88e_phy_config_rf_with_headerfile(struct ieee80211_hw *hw,
 			}
 		}
 
-		if (rtlhal->oem_id == RT_CID_819x_HP)
+		if (rtlhal->oem_id == RT_CID_819X_HP)
 			rtl88_config_s(hw, 0x52, 0x7E4BD);
 
 		break;
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c
index b5b513404376..c6a38201ac81 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c
@@ -319,7 +319,7 @@ void rtl92ce_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 			u8 e_aci = *(val);
 			rtl92c_dm_init_edca_turbo(hw);
 
-			if (rtlpci->acm_method != eAcmWay2_SW)
+			if (rtlpci->acm_method != EACMWAY2_SW)
 				rtlpriv->cfg->ops->set_hw_reg(hw,
 							      HW_VAR_ACM_CTRL,
 							      (&e_aci));
@@ -1736,7 +1736,7 @@ static void _rtl92ce_read_adapter_info(struct ieee80211_hw *hw)
 			if (rtlefuse->eeprom_did == 0x8176) {
 				if ((rtlefuse->eeprom_svid == 0x103C &&
 				     rtlefuse->eeprom_smid == 0x1629))
-					rtlhal->oem_id = RT_CID_819x_HP;
+					rtlhal->oem_id = RT_CID_819X_HP;
 				else
 					rtlhal->oem_id = RT_CID_DEFAULT;
 			} else {
@@ -1747,7 +1747,7 @@ static void _rtl92ce_read_adapter_info(struct ieee80211_hw *hw)
 			rtlhal->oem_id = RT_CID_TOSHIBA;
 			break;
 		case EEPROM_CID_QMI:
-			rtlhal->oem_id = RT_CID_819x_QMI;
+			rtlhal->oem_id = RT_CID_819X_QMI;
 			break;
 		case EEPROM_CID_WHQL:
 		default:
@@ -1766,14 +1766,14 @@ static void _rtl92ce_hal_customized_behavior(struct ieee80211_hw *hw)
 	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
 
 	switch (rtlhal->oem_id) {
-	case RT_CID_819x_HP:
+	case RT_CID_819X_HP:
 		pcipriv->ledctl.led_opendrain = true;
 		break;
-	case RT_CID_819x_Lenovo:
+	case RT_CID_819X_LENOVO:
 	case RT_CID_DEFAULT:
 	case RT_CID_TOSHIBA:
 	case RT_CID_CCX:
-	case RT_CID_819x_Acer:
+	case RT_CID_819X_ACER:
 	case RT_CID_WHQL:
 	default:
 		break;
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
index 49ad10668078..db7df7f83a02 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
@@ -394,7 +394,7 @@ static void _rtl92cu_read_adapter_info(struct ieee80211_hw *hw)
 			if (rtlefuse->eeprom_did == 0x8176) {
 				if ((rtlefuse->eeprom_svid == 0x103C &&
 				     rtlefuse->eeprom_smid == 0x1629))
-					rtlhal->oem_id = RT_CID_819x_HP;
+					rtlhal->oem_id = RT_CID_819X_HP;
 				else
 					rtlhal->oem_id = RT_CID_DEFAULT;
 			} else {
@@ -405,7 +405,7 @@ static void _rtl92cu_read_adapter_info(struct ieee80211_hw *hw)
 			rtlhal->oem_id = RT_CID_TOSHIBA;
 			break;
 		case EEPROM_CID_QMI:
-			rtlhal->oem_id = RT_CID_819x_QMI;
+			rtlhal->oem_id = RT_CID_819X_QMI;
 			break;
 		case EEPROM_CID_WHQL:
 		default:
@@ -423,14 +423,14 @@ static void _rtl92cu_hal_customized_behavior(struct ieee80211_hw *hw)
 	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
 
 	switch (rtlhal->oem_id) {
-	case RT_CID_819x_HP:
+	case RT_CID_819X_HP:
 		usb_priv->ledctl.led_opendrain = true;
 		break;
-	case RT_CID_819x_Lenovo:
+	case RT_CID_819X_LENOVO:
 	case RT_CID_DEFAULT:
 	case RT_CID_TOSHIBA:
 	case RT_CID_CCX:
-	case RT_CID_819x_Acer:
+	case RT_CID_819X_ACER:
 	case RT_CID_WHQL:
 	default:
 		break;
@@ -1797,7 +1797,7 @@ void rtl92cu_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 					  e_aci);
 				break;
 			}
-			if (rtlusb->acm_method != eAcmWay2_SW)
+			if (rtlusb->acm_method != EACMWAY2_SW)
 				rtlpriv->cfg->ops->set_hw_reg(hw,
 					 HW_VAR_ACM_CTRL, &e_aci);
 			break;
diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/hw.c b/drivers/net/wireless/rtlwifi/rtl8192de/hw.c
index c16aa6b59527..c9f6ee7e1765 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192de/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192de/hw.c
@@ -318,7 +318,7 @@ void rtl92de_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 	case HW_VAR_AC_PARAM: {
 		u8 e_aci = *val;
 		rtl92d_dm_init_edca_turbo(hw);
-		if (rtlpci->acm_method != eAcmWay2_SW)
+		if (rtlpci->acm_method != EACMWAY2_SW)
 			rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_ACM_CTRL,
 						      &e_aci);
 		break;
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/hw.c b/drivers/net/wireless/rtlwifi/rtl8192se/hw.c
index 5aa39ef42eba..7c4b39cc5dbf 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192se/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/hw.c
@@ -251,7 +251,7 @@ void rtl92se_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 			u8 e_aci = *val;
 			rtl92s_dm_init_edca_turbo(hw);
 
-			if (rtlpci->acm_method != eAcmWay2_SW)
+			if (rtlpci->acm_method != EACMWAY2_SW)
 				rtlpriv->cfg->ops->set_hw_reg(hw,
 						 HW_VAR_ACM_CTRL,
 						 &e_aci);
diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c b/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c
index 4680816f9597..914b36f72d55 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c
@@ -306,7 +306,7 @@ void rtl8723ae_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 		u8 e_aci = *((u8 *) val);
 		rtl8723ae_dm_init_edca_turbo(hw);
 
-		if (rtlpci->acm_method != eAcmWay2_SW)
+		if (rtlpci->acm_method != EACMWAY2_SW)
 			rtlpriv->cfg->ops->set_hw_reg(hw,
 						      HW_VAR_ACM_CTRL,
 						      (u8 *) (&e_aci));
@@ -1656,7 +1656,7 @@ static void _rtl8723ae_read_adapter_info(struct ieee80211_hw *hw,
 				    CHK_SVID_SMID(0x10EC, 0x9185))
 					rtlhal->oem_id = RT_CID_TOSHIBA;
 				else if (rtlefuse->eeprom_svid == 0x1025)
-					rtlhal->oem_id = RT_CID_819x_Acer;
+					rtlhal->oem_id = RT_CID_819X_ACER;
 				else if (CHK_SVID_SMID(0x10EC, 0x6191) ||
 					 CHK_SVID_SMID(0x10EC, 0x6192) ||
 					 CHK_SVID_SMID(0x10EC, 0x6193) ||
@@ -1666,7 +1666,7 @@ static void _rtl8723ae_read_adapter_info(struct ieee80211_hw *hw,
 					 CHK_SVID_SMID(0x10EC, 0x8191) ||
 					 CHK_SVID_SMID(0x10EC, 0x8192) ||
 					 CHK_SVID_SMID(0x10EC, 0x8193))
-					rtlhal->oem_id = RT_CID_819x_SAMSUNG;
+					rtlhal->oem_id = RT_CID_819X_SAMSUNG;
 				else if (CHK_SVID_SMID(0x10EC, 0x8195) ||
 					 CHK_SVID_SMID(0x10EC, 0x9195) ||
 					 CHK_SVID_SMID(0x10EC, 0x7194) ||
@@ -1674,24 +1674,24 @@ static void _rtl8723ae_read_adapter_info(struct ieee80211_hw *hw,
 					 CHK_SVID_SMID(0x10EC, 0x8201) ||
 					 CHK_SVID_SMID(0x10EC, 0x8202) ||
 					 CHK_SVID_SMID(0x10EC, 0x9200))
-					rtlhal->oem_id = RT_CID_819x_Lenovo;
+					rtlhal->oem_id = RT_CID_819X_LENOVO;
 				else if (CHK_SVID_SMID(0x10EC, 0x8197) ||
 					 CHK_SVID_SMID(0x10EC, 0x9196))
-					rtlhal->oem_id = RT_CID_819x_CLEVO;
+					rtlhal->oem_id = RT_CID_819X_CLEVO;
 				else if (CHK_SVID_SMID(0x1028, 0x8194) ||
 					 CHK_SVID_SMID(0x1028, 0x8198) ||
 					 CHK_SVID_SMID(0x1028, 0x9197) ||
 					 CHK_SVID_SMID(0x1028, 0x9198))
-					rtlhal->oem_id = RT_CID_819x_DELL;
+					rtlhal->oem_id = RT_CID_819X_DELL;
 				else if (CHK_SVID_SMID(0x103C, 0x1629))
-					rtlhal->oem_id = RT_CID_819x_HP;
+					rtlhal->oem_id = RT_CID_819X_HP;
 				else if (CHK_SVID_SMID(0x1A32, 0x2315))
-					rtlhal->oem_id = RT_CID_819x_QMI;
+					rtlhal->oem_id = RT_CID_819X_QMI;
 				else if (CHK_SVID_SMID(0x10EC, 0x8203))
-					rtlhal->oem_id = RT_CID_819x_PRONETS;
+					rtlhal->oem_id = RT_CID_819X_PRONETS;
 				else if (CHK_SVID_SMID(0x1043, 0x84B5))
 					rtlhal->oem_id =
-						 RT_CID_819x_Edimax_ASUS;
+						 RT_CID_819X_EDIMAX_ASUS;
 				else
 					rtlhal->oem_id = RT_CID_DEFAULT;
 			} else if (rtlefuse->eeprom_did == 0x8178) {
@@ -1713,12 +1713,12 @@ static void _rtl8723ae_read_adapter_info(struct ieee80211_hw *hw,
 				    CHK_SVID_SMID(0x10EC, 0x9185))
 					rtlhal->oem_id = RT_CID_TOSHIBA;
 				else if (rtlefuse->eeprom_svid == 0x1025)
-					rtlhal->oem_id = RT_CID_819x_Acer;
+					rtlhal->oem_id = RT_CID_819X_ACER;
 				else if (CHK_SVID_SMID(0x10EC, 0x8186))
-					rtlhal->oem_id = RT_CID_819x_PRONETS;
+					rtlhal->oem_id = RT_CID_819X_PRONETS;
 				else if (CHK_SVID_SMID(0x1043, 0x8486))
 					rtlhal->oem_id =
-						     RT_CID_819x_Edimax_ASUS;
+						     RT_CID_819X_EDIMAX_ASUS;
 				else
 					rtlhal->oem_id = RT_CID_DEFAULT;
 			} else {
@@ -1732,7 +1732,7 @@ static void _rtl8723ae_read_adapter_info(struct ieee80211_hw *hw,
 			rtlhal->oem_id = RT_CID_CCX;
 			break;
 		case EEPROM_CID_QMI:
-			rtlhal->oem_id = RT_CID_819x_QMI;
+			rtlhal->oem_id = RT_CID_819X_QMI;
 			break;
 		case EEPROM_CID_WHQL:
 				break;
diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/trx.h b/drivers/net/wireless/rtlwifi/rtl8723ae/trx.h
index ad05b54bc0f1..c75bfe8d570c 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723ae/trx.h
+++ b/drivers/net/wireless/rtlwifi/rtl8723ae/trx.h
@@ -521,12 +521,6 @@ do {							\
 		memset(__pdesc, 0, _size);		\
 } while (0)
 
-#define RTL8723E_RX_HAL_IS_CCK_RATE(rxmcs)		\
-	((rxmcs) == DESC92_RATE1M ||			\
-	 (rxmcs) == DESC92_RATE2M ||			\
-	 (rxmcs) == DESC92_RATE5_5M ||			\
-	 (rxmcs) == DESC92_RATE11M)
-
 struct rx_fwinfo_8723e {
 	u8 gain_trsw[4];
 	u8 pwdb_all;
diff --git a/drivers/net/wireless/rtlwifi/usb.c b/drivers/net/wireless/rtlwifi/usb.c
index 4933f02ce1d5..4e2a726cdb16 100644
--- a/drivers/net/wireless/rtlwifi/usb.c
+++ b/drivers/net/wireless/rtlwifi/usb.c
@@ -410,7 +410,7 @@ static void rtl_usb_init_sw(struct ieee80211_hw *hw)
 	mac->current_ampdu_factor = 3;
 
 	/* QOS */
-	rtlusb->acm_method = eAcmWay2_SW;
+	rtlusb->acm_method = EACMWAY2_SW;
 
 	/* IRQ */
 	/* HIMR - turn all on */
diff --git a/drivers/net/wireless/rtlwifi/wifi.h b/drivers/net/wireless/rtlwifi/wifi.h
index de91c82f87fd..3f52bf8abe00 100644
--- a/drivers/net/wireless/rtlwifi/wifi.h
+++ b/drivers/net/wireless/rtlwifi/wifi.h
@@ -109,6 +109,19 @@
 #define	MAX_CHNL_GROUP_24G		6
 #define	MAX_CHNL_GROUP_5G		14
 
+#define TX_PWR_BY_RATE_NUM_BAND		2
+#define TX_PWR_BY_RATE_NUM_RF		4
+#define TX_PWR_BY_RATE_NUM_SECTION	12
+#define MAX_BASE_NUM_IN_PHY_REG_PG_24G  6
+#define MAX_BASE_NUM_IN_PHY_REG_PG_5G	5
+
+enum rf_tx_num {
+	RF_1TX = 0,
+	RF_2TX,
+	RF_MAX_TX_NUM,
+	RF_TX_NUM_NONIMPLEMENT,
+};
+
 struct txpower_info_2g {
 	u8 index_cck_base[MAX_RF_PATH][MAX_CHNL_GROUP_24G];
 	u8 index_bw40_base[MAX_RF_PATH][MAX_CHNL_GROUP_24G];
@@ -129,6 +142,15 @@ struct txpower_info_5g {
 	u8 bw40_diff[MAX_RF_PATH][MAX_TX_COUNT];
 };
 
+enum rate_section {
+	CCK = 0,
+	OFDM,
+	HT_MCS0_MCS7,
+	HT_MCS8_MCS15,
+	VHT_1SSMCS0_1SSMCS9,
+	VHT_2SSMCS0_2SSMCS9,
+};
+
 enum intf_type {
 	INTF_PCI = 0,
 	INTF_USB = 1,
@@ -200,6 +222,12 @@ enum hardware_type {
 	 _pdesc->rxmcs == DESC92_RATE5_5M ||		\
 	 _pdesc->rxmcs == DESC92_RATE11M)
 
+#define RTL8723E_RX_HAL_IS_CCK_RATE(rxmcs)		\
+	((rxmcs) == DESC92_RATE1M ||			\
+	 (rxmcs) == DESC92_RATE2M ||			\
+	 (rxmcs) == DESC92_RATE5_5M ||			\
+	 (rxmcs) == DESC92_RATE11M)
+
 enum scan_operation_backup_opt {
 	SCAN_OPT_BACKUP = 0,
 	SCAN_OPT_RESTORE,
@@ -335,6 +363,7 @@ enum hw_variables {
 
 	HAL_DEF_WOWLAN,
 	HW_VAR_MRC,
+	HW_VAR_KEEP_ALIVE,
 
 	HW_VAR_MGT_FILTER,
 	HW_VAR_CTRL_FILTER,
@@ -353,34 +382,34 @@ enum rt_oem_id {
 	RT_CID_8187_HW_LED = 3,
 	RT_CID_8187_NETGEAR = 4,
 	RT_CID_WHQL = 5,
-	RT_CID_819x_CAMEO = 6,
-	RT_CID_819x_RUNTOP = 7,
-	RT_CID_819x_Senao = 8,
+	RT_CID_819X_CAMEO = 6,
+	RT_CID_819X_RUNTOP = 7,
+	RT_CID_819X_SENAO = 8,
 	RT_CID_TOSHIBA = 9,
-	RT_CID_819x_Netcore = 10,
-	RT_CID_Nettronix = 11,
+	RT_CID_819X_NETCORE = 10,
+	RT_CID_NETTRONIX = 11,
 	RT_CID_DLINK = 12,
 	RT_CID_PRONET = 13,
 	RT_CID_COREGA = 14,
-	RT_CID_819x_ALPHA = 15,
-	RT_CID_819x_Sitecom = 16,
+	RT_CID_819X_ALPHA = 15,
+	RT_CID_819X_SITECOM = 16,
 	RT_CID_CCX = 17,
-	RT_CID_819x_Lenovo = 18,
-	RT_CID_819x_QMI = 19,
-	RT_CID_819x_Edimax_Belkin = 20,
-	RT_CID_819x_Sercomm_Belkin = 21,
-	RT_CID_819x_CAMEO1 = 22,
-	RT_CID_819x_MSI = 23,
-	RT_CID_819x_Acer = 24,
-	RT_CID_819x_HP = 27,
-	RT_CID_819x_CLEVO = 28,
-	RT_CID_819x_Arcadyan_Belkin = 29,
-	RT_CID_819x_SAMSUNG = 30,
-	RT_CID_819x_WNC_COREGA = 31,
-	RT_CID_819x_Foxcoon = 32,
-	RT_CID_819x_DELL = 33,
-	RT_CID_819x_PRONETS = 34,
-	RT_CID_819x_Edimax_ASUS = 35,
+	RT_CID_819X_LENOVO = 18,
+	RT_CID_819X_QMI = 19,
+	RT_CID_819X_EDIMAX_BELKIN = 20,
+	RT_CID_819X_SERCOMM_BELKIN = 21,
+	RT_CID_819X_CAMEO1 = 22,
+	RT_CID_819X_MSI = 23,
+	RT_CID_819X_ACER = 24,
+	RT_CID_819X_HP = 27,
+	RT_CID_819X_CLEVO = 28,
+	RT_CID_819X_ARCADYAN_BELKIN = 29,
+	RT_CID_819X_SAMSUNG = 30,
+	RT_CID_819X_WNC_COREGA = 31,
+	RT_CID_819X_FOXCOON = 32,
+	RT_CID_819X_DELL = 33,
+	RT_CID_819X_PRONETS = 34,
+	RT_CID_819X_EDIMAX_ASUS = 35,
 	RT_CID_NETGEAR = 36,
 	RT_CID_PLANEX = 37,
 	RT_CID_CC_C = 38,
@@ -613,7 +642,7 @@ enum rtl_led_pin {
 enum acm_method {
 	eAcmWay0_SwAndHw = 0,
 	eAcmWay1_HW = 1,
-	eAcmWay2_SW = 2,
+	EACMWAY2_SW = 2,
 };
 
 enum macphy_mode {
@@ -822,9 +851,9 @@ struct rate_adaptive {
 	u32 high_rssi_thresh_for_ra;
 	u32 high2low_rssi_thresh_for_ra;
 	u8 low2high_rssi_thresh_for_ra40m;
-	u32 low_rssi_thresh_for_ra40M;
+	u32 low_rssi_thresh_for_ra40m;
 	u8 low2high_rssi_thresh_for_ra20m;
-	u32 low_rssi_thresh_for_ra20M;
+	u32 low_rssi_thresh_for_ra20m;
 	u32 upper_rssi_threshold_ratr;
 	u32 middleupper_rssi_threshold_ratr;
 	u32 middle_rssi_threshold_ratr;
@@ -991,6 +1020,13 @@ struct rtl_phy {
 	u8 cck_high_power;
 	/* MAX_PG_GROUP groups of pwr diff by rates */
 	u32 mcs_offset[MAX_PG_GROUP][16];
+	u32 tx_power_by_rate_offset[TX_PWR_BY_RATE_NUM_BAND]
+				   [TX_PWR_BY_RATE_NUM_RF]
+				   [TX_PWR_BY_RATE_NUM_RF]
+				   [TX_PWR_BY_RATE_NUM_SECTION];
+	u8 txpwr_by_rate_base_24g[TX_PWR_BY_RATE_NUM_RF]
+				 [TX_PWR_BY_RATE_NUM_RF]
+				 [MAX_BASE_NUM_IN_PHY_REG_PG_24G];
 	u8 default_initialgain[4];
 
 	/* the current Tx power level */
@@ -1218,6 +1254,7 @@ struct rtl_hal {
 	bool being_init_adapter;
 	bool bbrf_ready;
 	bool mac_func_enable;
+	bool pre_edcca_enable;
 	struct bt_coexist_8723 hal_coex_8723;
 
 	enum intf_type interface;
@@ -1326,6 +1363,16 @@ struct fast_ant_training {
 	bool	becomelinked;
 };
 
+struct dm_phy_dbg_info {
+	char rx_snrdb[4];
+	u64 num_qry_phy_status;
+	u64 num_qry_phy_status_cck;
+	u64 num_qry_phy_status_ofdm;
+	u16 num_qry_beacon_pkt;
+	u16 num_non_be_pkt;
+	s32 rx_evm[4];
+};
+
 struct rtl_dm {
 	/*PHY status for Dynamic Management */
 	long entry_min_undec_sm_pwdb;
@@ -1367,14 +1414,28 @@ struct rtl_dm {
 	bool disable_tx_int;
 	char ofdm_index[2];
 	char cck_index;
-	char delta_power_index;
-	char delta_power_index_last;
-	char power_index_offset;
+	char delta_power_index[MAX_RF_PATH];
+	char delta_power_index_last[MAX_RF_PATH];
+	char power_index_offset[MAX_RF_PATH];
+
+	bool one_entry_only;
+	struct dm_phy_dbg_info dbginfo;
+
+	/* Dynamic ATC switch */
+	bool atc_status;
+	bool large_cfo_hit;
+	bool is_freeze;
+	int cfo_tail[2];
+	int cfo_ave_pre;
+	int crystal_cap;
+	u8 cfo_threshold;
+	u32 packet_count;
+	u32 packet_count_pre;
 
 	/*88e tx power tracking*/
 	u8	swing_idx_ofdm[2];
 	u8	swing_idx_ofdm_cur;
-	u8	swing_idx_ofdm_base;
+	u8	swing_idx_ofdm_base[MAX_RF_PATH];
 	bool	swing_flag_ofdm;
 	u8	swing_idx_cck;
 	u8	swing_idx_cck_cur;
@@ -1427,12 +1488,14 @@ struct rtl_efuse {
 	u8 eeprom_tssi_5g[3][2]; /* for 5GL/5GM/5GH band. */
 	u8 eeprom_pwrlimit_ht20[CHANNEL_GROUP_MAX];
 	u8 eeprom_pwrlimit_ht40[CHANNEL_GROUP_MAX];
-	u8 eeprom_chnlarea_txpwr_cck[2][CHANNEL_GROUP_MAX_2G];
-	u8 eeprom_chnlarea_txpwr_ht40_1s[2][CHANNEL_GROUP_MAX];
-	u8 eprom_chnl_txpwr_ht40_2sdf[2][CHANNEL_GROUP_MAX];
+	u8 eeprom_chnlarea_txpwr_cck[MAX_RF_PATH][CHANNEL_GROUP_MAX_2G];
+	u8 eeprom_chnlarea_txpwr_ht40_1s[MAX_RF_PATH][CHANNEL_GROUP_MAX];
+	u8 eprom_chnl_txpwr_ht40_2sdf[MAX_RF_PATH][CHANNEL_GROUP_MAX];
 	u8 txpwrlevel_cck[2][CHANNEL_MAX_NUMBER_2G];
-	u8 txpwrlevel_ht40_1s[2][CHANNEL_MAX_NUMBER];	/*For HT 40MHZ pwr */
-	u8 txpwrlevel_ht40_2s[2][CHANNEL_MAX_NUMBER];	/*For HT 40MHZ pwr */
+	/* For HT 40MHZ pwr */
+	u8 txpwrlevel_ht40_1s[MAX_RF_PATH][CHANNEL_MAX_NUMBER];
+	u8 txpwrlevel_ht40_2s[MAX_RF_PATH][CHANNEL_MAX_NUMBER];
+	u8 txpwr_ht40diff[MAX_RF_PATH][MAX_TX_COUNT];/*BW40_24G_Diff*/
 
 	u8 internal_pa_5g[2];	/* pathA / pathB */
 	u8 eeprom_c9;
@@ -1705,6 +1768,8 @@ struct rtl_hal_ops {
 			     enum led_ctl_mode ledaction);
 	void (*set_desc) (u8 *pdesc, bool istx, u8 desc_name, u8 *val);
 	u32 (*get_desc) (u8 *pdesc, bool istx, u8 desc_name);
+	bool (*is_tx_desc_closed) (struct ieee80211_hw *hw,
+				   u8 hw_queue, u16 index);
 	void (*tx_polling) (struct ieee80211_hw *hw, u8 hw_queue);
 	void (*enable_hw_sec) (struct ieee80211_hw *hw);
 	void (*set_key) (struct ieee80211_hw *hw, u32 key_index,
@@ -1743,6 +1808,7 @@ struct rtl_hal_ops {
 	void (*bt_coex_off_before_lps) (struct ieee80211_hw *hw);
 	void (*fill_h2c_cmd) (struct ieee80211_hw *hw, u8 element_id,
 			      u32 cmd_len, u8 *p_cmdbuffer);
+	bool (*get_btc_status) (void);
 };
 
 struct rtl_intf_ops {
@@ -1920,6 +1986,7 @@ struct ps_t {
 	u8 cur_ccasate;
 	u8 pre_rfstate;
 	u8 cur_rfstate;
+	u8 initialize;
 	long rssi_val_min;
 };
 
@@ -1977,6 +2044,7 @@ struct dig_t {
 	char backoffval_range_min;
 	u8 dig_min_0;
 	u8 dig_min_1;
+	u8 bt30_cur_igi;
 	bool media_connect_0;
 	bool media_connect_1;
 
@@ -1997,9 +2065,61 @@ struct rtl_btc_info {
 	u8 ant_num;
 };
 
-struct rtl_bt_coexist {
+struct bt_coexist_info {
 	struct rtl_btc_ops *btc_ops;
 	struct rtl_btc_info btc_info;
+	/* EEPROM BT info. */
+	u8 eeprom_bt_coexist;
+	u8 eeprom_bt_type;
+	u8 eeprom_bt_ant_num;
+	u8 eeprom_bt_ant_isol;
+	u8 eeprom_bt_radio_shared;
+
+	u8 bt_coexistence;
+	u8 bt_ant_num;
+	u8 bt_coexist_type;
+	u8 bt_state;
+	u8 bt_cur_state;	/* 0:on, 1:off */
+	u8 bt_ant_isolation;	/* 0:good, 1:bad */
+	u8 bt_pape_ctrl;	/* 0:SW, 1:SW/HW dynamic */
+	u8 bt_service;
+	u8 bt_radio_shared_type;
+	u8 bt_rfreg_origin_1e;
+	u8 bt_rfreg_origin_1f;
+	u8 bt_rssi_state;
+	u32 ratio_tx;
+	u32 ratio_pri;
+	u32 bt_edca_ul;
+	u32 bt_edca_dl;
+
+	bool init_set;
+	bool bt_busy_traffic;
+	bool bt_traffic_mode_set;
+	bool bt_non_traffic_mode_set;
+
+	bool fw_coexist_all_off;
+	bool sw_coexist_all_off;
+	bool hw_coexist_all_off;
+	u32 cstate;
+	u32 previous_state;
+	u32 cstate_h;
+	u32 previous_state_h;
+
+	u8 bt_pre_rssi_state;
+	u8 bt_pre_rssi_state1;
+
+	u8 reg_bt_iso;
+	u8 reg_bt_sco;
+	bool balance_on;
+	u8 bt_active_zero_cnt;
+	bool cur_bt_disabled;
+	bool pre_bt_disabled;
+
+	u8 bt_profile_case;
+	u8 bt_profile_action;
+	bool bt_busy;
+	bool hold_for_bt_operation;
+	u8 lps_counter;
 };
 
 struct rtl_btc_ops {
@@ -2098,7 +2218,7 @@ struct rtl_priv {
 	struct proxim proximity;
 
 	/*for bt coexist use*/
-	struct rtl_bt_coexist btcoexist;
+	struct bt_coexist_info btcoexist;
 
 	/* separate 92ee from other ICs,
 	 * 92ee use new trx flow.
@@ -2164,62 +2284,6 @@ enum bt_radio_shared {
 	BT_RADIO_INDIVIDUAL = 1,
 };
 
-struct bt_coexist_info {
-
-	/* EEPROM BT info. */
-	u8 eeprom_bt_coexist;
-	u8 eeprom_bt_type;
-	u8 eeprom_bt_ant_num;
-	u8 eeprom_bt_ant_isol;
-	u8 eeprom_bt_radio_shared;
-
-	u8 bt_coexistence;
-	u8 bt_ant_num;
-	u8 bt_coexist_type;
-	u8 bt_state;
-	u8 bt_cur_state;	/* 0:on, 1:off */
-	u8 bt_ant_isolation;	/* 0:good, 1:bad */
-	u8 bt_pape_ctrl;	/* 0:SW, 1:SW/HW dynamic */
-	u8 bt_service;
-	u8 bt_radio_shared_type;
-	u8 bt_rfreg_origin_1e;
-	u8 bt_rfreg_origin_1f;
-	u8 bt_rssi_state;
-	u32 ratio_tx;
-	u32 ratio_pri;
-	u32 bt_edca_ul;
-	u32 bt_edca_dl;
-
-	bool init_set;
-	bool bt_busy_traffic;
-	bool bt_traffic_mode_set;
-	bool bt_non_traffic_mode_set;
-
-	bool fw_coexist_all_off;
-	bool sw_coexist_all_off;
-	bool hw_coexist_all_off;
-	u32 cstate;
-	u32 previous_state;
-	u32 cstate_h;
-	u32 previous_state_h;
-
-	u8 bt_pre_rssi_state;
-	u8 bt_pre_rssi_state1;
-
-	u8 reg_bt_iso;
-	u8 reg_bt_sco;
-	bool balance_on;
-	u8 bt_active_zero_cnt;
-	bool cur_bt_disabled;
-	bool pre_bt_disabled;
-
-	u8 bt_profile_case;
-	u8 bt_profile_action;
-	bool bt_busy;
-	bool hold_for_bt_operation;
-	u8 lps_counter;
-};
-
 
 /****************************************
 	mem access macro define start
-- 
cgit v1.2.2


From 0a168b48cdf7c22cf0250f62df4dde20adebf74b Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Fri, 28 Feb 2014 15:16:47 -0600
Subject: rtlwifi: rtl8723ae: rtl8723-common: Create new driver for common code

The drivers for RTL8723AE and RTL8723BE have some code in common.
This commit creates a driver for this code that will be shared, and
copies those common routines from rtl8723ae's phy code.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtlwifi/Kconfig               |   6 +
 drivers/net/wireless/rtlwifi/Makefile              |   1 +
 drivers/net/wireless/rtlwifi/rtl8723ae/hal_btc.c   |   7 +-
 drivers/net/wireless/rtlwifi/rtl8723ae/phy.c       | 482 ++-------------------
 drivers/net/wireless/rtlwifi/rtl8723ae/phy.h       |  21 -
 drivers/net/wireless/rtlwifi/rtl8723ae/sw.c        |   5 +-
 drivers/net/wireless/rtlwifi/rtl8723com/Makefile   |   7 +
 drivers/net/wireless/rtlwifi/rtl8723com/main.c     |  33 ++
 .../net/wireless/rtlwifi/rtl8723com/phy_common.c   | 434 +++++++++++++++++++
 .../net/wireless/rtlwifi/rtl8723com/phy_common.h   |  28 +-
 10 files changed, 555 insertions(+), 469 deletions(-)
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8723com/Makefile
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8723com/main.c
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8723com/phy_common.c

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtlwifi/Kconfig b/drivers/net/wireless/rtlwifi/Kconfig
index 29c6ce5c3371..9251e0d3685c 100644
--- a/drivers/net/wireless/rtlwifi/Kconfig
+++ b/drivers/net/wireless/rtlwifi/Kconfig
@@ -48,6 +48,7 @@ config RTL8723AE
 	depends on PCI
 	select RTLWIFI
 	select RTLWIFI_PCI
+	select RTL8723_COMMON
 	select RTLBTCOEXIST
 	---help---
 	This is the driver for Realtek RTL8723AE 802.11n PCIe
@@ -102,6 +103,11 @@ config RTL8192C_COMMON
 	depends on RTL8192CE || RTL8192CU
 	default y
 
+config RTL8723_COMMON
+	tristate
+	depends on RTL8723AE
+	default y
+
 config RTLBTCOEXIST
 	tristate
 	depends on RTL8723AE
diff --git a/drivers/net/wireless/rtlwifi/Makefile b/drivers/net/wireless/rtlwifi/Makefile
index f354c5f9aed5..d97d1b9d2427 100644
--- a/drivers/net/wireless/rtlwifi/Makefile
+++ b/drivers/net/wireless/rtlwifi/Makefile
@@ -26,5 +26,6 @@ obj-$(CONFIG_RTL8192DE)		+= rtl8192de/
 obj-$(CONFIG_RTL8723AE)		+= rtl8723ae/
 obj-$(CONFIG_RTL8188EE)		+= rtl8188ee/
 obj-$(CONFIG_RTLBTCOEXIST)	+= btcoexist/
+obj-$(CONFIG_RTL8723_COMMON)	+= rtl8723com/
 
 ccflags-y += -D__CHECK_ENDIAN__
diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/hal_btc.c b/drivers/net/wireless/rtlwifi/rtl8723ae/hal_btc.c
index 68c28340f791..8b64b1cd3176 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723ae/hal_btc.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723ae/hal_btc.c
@@ -30,6 +30,7 @@
 #include "hal_btc.h"
 #include "../pci.h"
 #include "phy.h"
+#include "../rtl8723com/phy_common.h"
 #include "fw.h"
 #include "reg.h"
 #include "def.h"
@@ -391,13 +392,13 @@ static void rtl8723ae_dm_bt_set_sw_full_time_dac_swing(struct ieee80211_hw *hw,
 	if (sw_dac_swing_on) {
 		RT_TRACE(rtlpriv, COMP_BT_COEXIST, DBG_TRACE,
 			 "[BTCoex], SwDacSwing = 0x%x\n", sw_dac_swing_lvl);
-		rtl8723ae_phy_set_bb_reg(hw, 0x880, 0xff000000,
-					 sw_dac_swing_lvl);
+		rtl8723_phy_set_bb_reg(hw, 0x880, 0xff000000,
+				       sw_dac_swing_lvl);
 		rtlpcipriv->bt_coexist.sw_coexist_all_off = false;
 	} else {
 		RT_TRACE(rtlpriv, COMP_BT_COEXIST, DBG_TRACE,
 			 "[BTCoex], SwDacSwing Off!\n");
-		rtl8723ae_phy_set_bb_reg(hw, 0x880, 0xff000000, 0xc0);
+		rtl8723_phy_set_bb_reg(hw, 0x880, 0xff000000, 0xc0);
 	}
 }
 
diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/phy.c b/drivers/net/wireless/rtlwifi/rtl8723ae/phy.c
index 5d318a85eda4..4f8189d3bb44 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723ae/phy.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723ae/phy.c
@@ -36,6 +36,7 @@
 #include "rf.h"
 #include "dm.h"
 #include "table.h"
+#include "../rtl8723com/phy_common.h"
 
 /* static forward definitions */
 static u32 _phy_fw_rf_serial_read(struct ieee80211_hw *hw,
@@ -43,72 +44,17 @@ static u32 _phy_fw_rf_serial_read(struct ieee80211_hw *hw,
 static void _phy_fw_rf_serial_write(struct ieee80211_hw *hw,
 				    enum radio_path rfpath,
 				    u32 offset, u32 data);
-static u32 _phy_rf_serial_read(struct ieee80211_hw *hw,
-			       enum radio_path rfpath, u32 offset);
-static void _phy_rf_serial_write(struct ieee80211_hw *hw,
-				 enum radio_path rfpath, u32 offset, u32 data);
-static u32 _phy_calculate_bit_shift(u32 bitmask);
 static bool _phy_bb8192c_config_parafile(struct ieee80211_hw *hw);
 static bool _phy_cfg_mac_w_header(struct ieee80211_hw *hw);
 static bool _phy_cfg_bb_w_header(struct ieee80211_hw *hw, u8 configtype);
 static bool _phy_cfg_bb_w_pgheader(struct ieee80211_hw *hw, u8 configtype);
-static void _phy_init_bb_rf_reg_def(struct ieee80211_hw *hw);
-static bool _phy_set_sw_chnl_cmdarray(struct swchnlcmd *cmdtable,
-				      u32 cmdtableidx, u32 cmdtablesz,
-				      enum swchnlcmd_id cmdid,
-				      u32 para1, u32 para2,
-				      u32 msdelay);
 static bool _phy_sw_chnl_step_by_step(struct ieee80211_hw *hw, u8 channel,
 				      u8 *stage, u8 *step, u32 *delay);
 static u8 _phy_dbm_to_txpwr_Idx(struct ieee80211_hw *hw,
 				enum wireless_mode wirelessmode,
 				long power_indbm);
-static long _phy_txpwr_idx_to_dbm(struct ieee80211_hw *hw,
-				  enum wireless_mode wirelessmode, u8 txpwridx);
 static void rtl8723ae_phy_set_io(struct ieee80211_hw *hw);
 
-u32 rtl8723ae_phy_query_bb_reg(struct ieee80211_hw *hw, u32 regaddr,
-			       u32 bitmask)
-{
-	struct rtl_priv *rtlpriv = rtl_priv(hw);
-	u32 returnvalue, originalvalue, bitshift;
-
-	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE,
-		 "regaddr(%#x), bitmask(%#x)\n", regaddr, bitmask);
-	originalvalue = rtl_read_dword(rtlpriv, regaddr);
-	bitshift = _phy_calculate_bit_shift(bitmask);
-	returnvalue = (originalvalue & bitmask) >> bitshift;
-
-	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE,
-		 "BBR MASK=0x%x Addr[0x%x]=0x%x\n", bitmask, regaddr,
-		 originalvalue);
-
-	return returnvalue;
-}
-
-void rtl8723ae_phy_set_bb_reg(struct ieee80211_hw *hw,
-			      u32 regaddr, u32 bitmask, u32 data)
-{
-	struct rtl_priv *rtlpriv = rtl_priv(hw);
-	u32 originalvalue, bitshift;
-
-	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE,
-		 "regaddr(%#x), bitmask(%#x), data(%#x)\n", regaddr,
-		 bitmask, data);
-
-	if (bitmask != MASKDWORD) {
-		originalvalue = rtl_read_dword(rtlpriv, regaddr);
-		bitshift = _phy_calculate_bit_shift(bitmask);
-		data = ((originalvalue & (~bitmask)) | (data << bitshift));
-	}
-
-	rtl_write_dword(rtlpriv, regaddr, data);
-
-	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE,
-		 "regaddr(%#x), bitmask(%#x), data(%#x)\n",
-		 regaddr, bitmask, data);
-}
-
 u32 rtl8723ae_phy_query_rf_reg(struct ieee80211_hw *hw,
 			       enum radio_path rfpath, u32 regaddr, u32 bitmask)
 {
@@ -124,11 +70,11 @@ u32 rtl8723ae_phy_query_rf_reg(struct ieee80211_hw *hw,
 	spin_lock_irqsave(&rtlpriv->locks.rf_lock, flags);
 
 	if (rtlphy->rf_mode != RF_OP_BY_FW)
-		original_value = _phy_rf_serial_read(hw, rfpath, regaddr);
+		original_value = rtl8723_phy_rf_serial_read(hw, rfpath, regaddr);
 	else
 		original_value = _phy_fw_rf_serial_read(hw, rfpath, regaddr);
 
-	bitshift = _phy_calculate_bit_shift(bitmask);
+	bitshift = rtl8723_phy_calculate_bit_shift(bitmask);
 	readback_value = (original_value & bitmask) >> bitshift;
 
 	spin_unlock_irqrestore(&rtlpriv->locks.rf_lock, flags);
@@ -157,19 +103,19 @@ void rtl8723ae_phy_set_rf_reg(struct ieee80211_hw *hw,
 
 	if (rtlphy->rf_mode != RF_OP_BY_FW) {
 		if (bitmask != RFREG_OFFSET_MASK) {
-			original_value = _phy_rf_serial_read(hw, rfpath,
-							     regaddr);
-			bitshift = _phy_calculate_bit_shift(bitmask);
+			original_value = rtl8723_phy_rf_serial_read(hw, rfpath,
+								    regaddr);
+			bitshift = rtl8723_phy_calculate_bit_shift(bitmask);
 			data = ((original_value & (~bitmask)) |
 			       (data << bitshift));
 		}
 
-		_phy_rf_serial_write(hw, rfpath, regaddr, data);
+		rtl8723_phy_rf_serial_write(hw, rfpath, regaddr, data);
 	} else {
 		if (bitmask != RFREG_OFFSET_MASK) {
 			original_value = _phy_fw_rf_serial_read(hw, rfpath,
 								regaddr);
-			bitshift = _phy_calculate_bit_shift(bitmask);
+			bitshift = rtl8723_phy_calculate_bit_shift(bitmask);
 			data = ((original_value & (~bitmask)) |
 			       (data << bitshift));
 		}
@@ -197,87 +143,6 @@ static void _phy_fw_rf_serial_write(struct ieee80211_hw *hw,
 	RT_ASSERT(false, "deprecated!\n");
 }
 
-static u32 _phy_rf_serial_read(struct ieee80211_hw *hw,
-			       enum radio_path rfpath, u32 offset)
-{
-	struct rtl_priv *rtlpriv = rtl_priv(hw);
-	struct rtl_phy *rtlphy = &(rtlpriv->phy);
-	struct bb_reg_def *pphyreg = &rtlphy->phyreg_def[rfpath];
-	u32 newoffset;
-	u32 tmplong, tmplong2;
-	u8 rfpi_enable = 0;
-	u32 retvalue;
-
-	offset &= 0x3f;
-	newoffset = offset;
-	if (RT_CANNOT_IO(hw)) {
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "return all one\n");
-		return 0xFFFFFFFF;
-	}
-	tmplong = rtl_get_bbreg(hw, RFPGA0_XA_HSSIPARAMETER2, MASKDWORD);
-	if (rfpath == RF90_PATH_A)
-		tmplong2 = tmplong;
-	else
-		tmplong2 = rtl_get_bbreg(hw, pphyreg->rfhssi_para2, MASKDWORD);
-	tmplong2 = (tmplong2 & (~BLSSIREADADDRESS)) |
-	    (newoffset << 23) | BLSSIREADEDGE;
-	rtl_set_bbreg(hw, RFPGA0_XA_HSSIPARAMETER2, MASKDWORD,
-		      tmplong & (~BLSSIREADEDGE));
-	mdelay(1);
-	rtl_set_bbreg(hw, pphyreg->rfhssi_para2, MASKDWORD, tmplong2);
-	mdelay(1);
-	rtl_set_bbreg(hw, RFPGA0_XA_HSSIPARAMETER2, MASKDWORD,
-		      tmplong | BLSSIREADEDGE);
-	mdelay(1);
-	if (rfpath == RF90_PATH_A)
-		rfpi_enable = (u8) rtl_get_bbreg(hw, RFPGA0_XA_HSSIPARAMETER1,
-						 BIT(8));
-	else if (rfpath == RF90_PATH_B)
-		rfpi_enable = (u8) rtl_get_bbreg(hw, RFPGA0_XB_HSSIPARAMETER1,
-						 BIT(8));
-	if (rfpi_enable)
-		retvalue = rtl_get_bbreg(hw, pphyreg->rf_rbpi,
-					 BLSSIREADBACKDATA);
-	else
-		retvalue = rtl_get_bbreg(hw, pphyreg->rf_rb,
-					 BLSSIREADBACKDATA);
-	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, "RFR-%d Addr[0x%x]=0x%x\n",
-		 rfpath, pphyreg->rf_rb, retvalue);
-	return retvalue;
-}
-
-static void _phy_rf_serial_write(struct ieee80211_hw *hw,
-				 enum radio_path rfpath, u32 offset, u32 data)
-{
-	u32 data_and_addr;
-	u32 newoffset;
-	struct rtl_priv *rtlpriv = rtl_priv(hw);
-	struct rtl_phy *rtlphy = &(rtlpriv->phy);
-	struct bb_reg_def *pphyreg = &rtlphy->phyreg_def[rfpath];
-
-	if (RT_CANNOT_IO(hw)) {
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "stop\n");
-		return;
-	}
-	offset &= 0x3f;
-	newoffset = offset;
-	data_and_addr = ((newoffset << 20) | (data & 0x000fffff)) & 0x0fffffff;
-	rtl_set_bbreg(hw, pphyreg->rf3wire_offset, MASKDWORD, data_and_addr);
-	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, "RFW-%d Addr[0x%x]=0x%x\n",
-		 rfpath, pphyreg->rf3wire_offset, data_and_addr);
-}
-
-static u32 _phy_calculate_bit_shift(u32 bitmask)
-{
-	u32 i;
-
-	for (i = 0; i <= 31; i++) {
-		if (((bitmask >> i) & 0x1) == 1)
-			break;
-	}
-	return i;
-}
-
 static void _rtl8723ae_phy_bb_config_1t(struct ieee80211_hw *hw)
 {
 	rtl_set_bbreg(hw, RFPGA0_TXINFO, 0x3, 0x2);
@@ -307,7 +172,7 @@ bool rtl8723ae_phy_bb_config(struct ieee80211_hw *hw)
 	u8 tmpu1b;
 	u8 reg_hwparafile = 1;
 
-	_phy_init_bb_rf_reg_def(hw);
+	rtl8723_phy_init_bb_rf_reg_def(hw);
 
 	/* 1. 0x28[1] = 1 */
 	tmpu1b = rtl_read_byte(rtlpriv, REG_AFE_PLL_CTRL);
@@ -690,92 +555,6 @@ void rtl8723ae_phy_get_hw_reg_originalvalue(struct ieee80211_hw *hw)
 		 ROFDM0_RXDETECTOR3, rtlphy->framesync);
 }
 
-static void _phy_init_bb_rf_reg_def(struct ieee80211_hw *hw)
-{
-	struct rtl_priv *rtlpriv = rtl_priv(hw);
-	struct rtl_phy *rtlphy = &(rtlpriv->phy);
-
-	rtlphy->phyreg_def[RF90_PATH_A].rfintfs = RFPGA0_XAB_RFINTERFACESW;
-	rtlphy->phyreg_def[RF90_PATH_B].rfintfs = RFPGA0_XAB_RFINTERFACESW;
-	rtlphy->phyreg_def[RF90_PATH_C].rfintfs = RFPGA0_XCD_RFINTERFACESW;
-	rtlphy->phyreg_def[RF90_PATH_D].rfintfs = RFPGA0_XCD_RFINTERFACESW;
-
-	rtlphy->phyreg_def[RF90_PATH_A].rfintfi = RFPGA0_XAB_RFINTERFACERB;
-	rtlphy->phyreg_def[RF90_PATH_B].rfintfi = RFPGA0_XAB_RFINTERFACERB;
-	rtlphy->phyreg_def[RF90_PATH_C].rfintfi = RFPGA0_XCD_RFINTERFACERB;
-	rtlphy->phyreg_def[RF90_PATH_D].rfintfi = RFPGA0_XCD_RFINTERFACERB;
-
-	rtlphy->phyreg_def[RF90_PATH_A].rfintfo = RFPGA0_XA_RFINTERFACEOE;
-	rtlphy->phyreg_def[RF90_PATH_B].rfintfo = RFPGA0_XB_RFINTERFACEOE;
-
-	rtlphy->phyreg_def[RF90_PATH_A].rfintfe = RFPGA0_XA_RFINTERFACEOE;
-	rtlphy->phyreg_def[RF90_PATH_B].rfintfe = RFPGA0_XB_RFINTERFACEOE;
-
-	rtlphy->phyreg_def[RF90_PATH_A].rf3wire_offset =
-			    RFPGA0_XA_LSSIPARAMETER;
-	rtlphy->phyreg_def[RF90_PATH_B].rf3wire_offset =
-			    RFPGA0_XB_LSSIPARAMETER;
-
-	rtlphy->phyreg_def[RF90_PATH_A].rflssi_select = rFPGA0_XAB_RFPARAMETER;
-	rtlphy->phyreg_def[RF90_PATH_B].rflssi_select = rFPGA0_XAB_RFPARAMETER;
-	rtlphy->phyreg_def[RF90_PATH_C].rflssi_select = rFPGA0_XCD_RFPARAMETER;
-	rtlphy->phyreg_def[RF90_PATH_D].rflssi_select = rFPGA0_XCD_RFPARAMETER;
-
-	rtlphy->phyreg_def[RF90_PATH_A].rftxgain_stage = RFPGA0_TXGAINSTAGE;
-	rtlphy->phyreg_def[RF90_PATH_B].rftxgain_stage = RFPGA0_TXGAINSTAGE;
-	rtlphy->phyreg_def[RF90_PATH_C].rftxgain_stage = RFPGA0_TXGAINSTAGE;
-	rtlphy->phyreg_def[RF90_PATH_D].rftxgain_stage = RFPGA0_TXGAINSTAGE;
-
-	rtlphy->phyreg_def[RF90_PATH_A].rfhssi_para1 = RFPGA0_XA_HSSIPARAMETER1;
-	rtlphy->phyreg_def[RF90_PATH_B].rfhssi_para1 = RFPGA0_XB_HSSIPARAMETER1;
-
-	rtlphy->phyreg_def[RF90_PATH_A].rfhssi_para2 = RFPGA0_XA_HSSIPARAMETER2;
-	rtlphy->phyreg_def[RF90_PATH_B].rfhssi_para2 = RFPGA0_XB_HSSIPARAMETER2;
-
-	rtlphy->phyreg_def[RF90_PATH_A].rfsw_ctrl = RFPGA0_XAB_SWITCHCONTROL;
-	rtlphy->phyreg_def[RF90_PATH_B].rfsw_ctrl = RFPGA0_XAB_SWITCHCONTROL;
-	rtlphy->phyreg_def[RF90_PATH_C].rfsw_ctrl = RFPGA0_XCD_SWITCHCONTROL;
-	rtlphy->phyreg_def[RF90_PATH_D].rfsw_ctrl = RFPGA0_XCD_SWITCHCONTROL;
-
-	rtlphy->phyreg_def[RF90_PATH_A].rfagc_control1 = ROFDM0_XAAGCCORE1;
-	rtlphy->phyreg_def[RF90_PATH_B].rfagc_control1 = ROFDM0_XBAGCCORE1;
-	rtlphy->phyreg_def[RF90_PATH_C].rfagc_control1 = ROFDM0_XCAGCCORE1;
-	rtlphy->phyreg_def[RF90_PATH_D].rfagc_control1 = ROFDM0_XDAGCCORE1;
-
-	rtlphy->phyreg_def[RF90_PATH_A].rfagc_control2 = ROFDM0_XAAGCCORE2;
-	rtlphy->phyreg_def[RF90_PATH_B].rfagc_control2 = ROFDM0_XBAGCCORE2;
-	rtlphy->phyreg_def[RF90_PATH_C].rfagc_control2 = ROFDM0_XCAGCCORE2;
-	rtlphy->phyreg_def[RF90_PATH_D].rfagc_control2 = ROFDM0_XDAGCCORE2;
-
-	rtlphy->phyreg_def[RF90_PATH_A].rfrxiq_imbal = ROFDM0_XARXIQIMBALANCE;
-	rtlphy->phyreg_def[RF90_PATH_B].rfrxiq_imbal = ROFDM0_XBRXIQIMBALANCE;
-	rtlphy->phyreg_def[RF90_PATH_C].rfrxiq_imbal = ROFDM0_XCRXIQIMBANLANCE;
-	rtlphy->phyreg_def[RF90_PATH_D].rfrxiq_imbal = ROFDM0_XDRXIQIMBALANCE;
-
-	rtlphy->phyreg_def[RF90_PATH_A].rfrx_afe = ROFDM0_XARXAFE;
-	rtlphy->phyreg_def[RF90_PATH_B].rfrx_afe = ROFDM0_XBRXAFE;
-	rtlphy->phyreg_def[RF90_PATH_C].rfrx_afe = ROFDM0_XCRXAFE;
-	rtlphy->phyreg_def[RF90_PATH_D].rfrx_afe = ROFDM0_XDRXAFE;
-
-	rtlphy->phyreg_def[RF90_PATH_A].rftxiq_imbal = ROFDM0_XATXIQIMBALANCE;
-	rtlphy->phyreg_def[RF90_PATH_B].rftxiq_imbal = ROFDM0_XBTXIQIMBALANCE;
-	rtlphy->phyreg_def[RF90_PATH_C].rftxiq_imbal = ROFDM0_XCTXIQIMBALANCE;
-	rtlphy->phyreg_def[RF90_PATH_D].rftxiq_imbal = ROFDM0_XDTXIQIMBALANCE;
-
-	rtlphy->phyreg_def[RF90_PATH_A].rftx_afe = ROFDM0_XATXAFE;
-	rtlphy->phyreg_def[RF90_PATH_B].rftx_afe = ROFDM0_XBTXAFE;
-	rtlphy->phyreg_def[RF90_PATH_C].rftx_afe = ROFDM0_XCTXAFE;
-	rtlphy->phyreg_def[RF90_PATH_D].rftx_afe = ROFDM0_XDTXAFE;
-
-	rtlphy->phyreg_def[RF90_PATH_A].rf_rb = RFPGA0_XA_LSSIREADBACK;
-	rtlphy->phyreg_def[RF90_PATH_B].rf_rb = RFPGA0_XB_LSSIREADBACK;
-	rtlphy->phyreg_def[RF90_PATH_C].rf_rb = RFPGA0_XC_LSSIREADBACK;
-	rtlphy->phyreg_def[RF90_PATH_D].rf_rb = RFPGA0_XD_LSSIREADBACK;
-
-	rtlphy->phyreg_def[RF90_PATH_A].rf_rbpi = TRANSCEIVEA_HSPI_READBACK;
-	rtlphy->phyreg_def[RF90_PATH_B].rf_rbpi = TRANSCEIVEB_HSPI_READBACK;
-}
-
 void rtl8723ae_phy_get_txpower_level(struct ieee80211_hw *hw, long *powerlevel)
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
@@ -785,17 +564,17 @@ void rtl8723ae_phy_get_txpower_level(struct ieee80211_hw *hw, long *powerlevel)
 	long txpwr_dbm;
 
 	txpwr_level = rtlphy->cur_cck_txpwridx;
-	txpwr_dbm = _phy_txpwr_idx_to_dbm(hw, WIRELESS_MODE_B, txpwr_level);
+	txpwr_dbm = rtl8723_phy_txpwr_idx_to_dbm(hw, WIRELESS_MODE_B, txpwr_level);
 	txpwr_level = rtlphy->cur_ofdm24g_txpwridx +
 	    rtlefuse->legacy_ht_txpowerdiff;
-	if (_phy_txpwr_idx_to_dbm(hw, WIRELESS_MODE_G, txpwr_level) > txpwr_dbm)
-		txpwr_dbm = _phy_txpwr_idx_to_dbm(hw, WIRELESS_MODE_G,
+	if (rtl8723_phy_txpwr_idx_to_dbm(hw, WIRELESS_MODE_G, txpwr_level) > txpwr_dbm)
+		txpwr_dbm = rtl8723_phy_txpwr_idx_to_dbm(hw, WIRELESS_MODE_G,
 						  txpwr_level);
 	txpwr_level = rtlphy->cur_ofdm24g_txpwridx;
-	if (_phy_txpwr_idx_to_dbm(hw, WIRELESS_MODE_N_24G, txpwr_level) >
+	if (rtl8723_phy_txpwr_idx_to_dbm(hw, WIRELESS_MODE_N_24G, txpwr_level) >
 	    txpwr_dbm)
-		txpwr_dbm = _phy_txpwr_idx_to_dbm(hw, WIRELESS_MODE_N_24G,
-						  txpwr_level);
+		txpwr_dbm = rtl8723_phy_txpwr_idx_to_dbm(hw, WIRELESS_MODE_N_24G,
+							 txpwr_level);
 	*powerlevel = txpwr_dbm;
 }
 
@@ -912,28 +691,6 @@ static u8 _phy_dbm_to_txpwr_Idx(struct ieee80211_hw *hw,
 	return txpwridx;
 }
 
-static long _phy_txpwr_idx_to_dbm(struct ieee80211_hw *hw,
-				  enum wireless_mode wirelessmode, u8 txpwridx)
-{
-	long offset;
-	long pwrout_dbm;
-
-	switch (wirelessmode) {
-	case WIRELESS_MODE_B:
-		offset = -7;
-		break;
-	case WIRELESS_MODE_G:
-	case WIRELESS_MODE_N_24G:
-		offset = -8;
-		break;
-	default:
-		offset = -8;
-		break;
-	}
-	pwrout_dbm = txpwridx / 2 + offset;
-	return pwrout_dbm;
-}
-
 void rtl8723ae_phy_set_bw_mode_callback(struct ieee80211_hw *hw)
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
@@ -1117,26 +874,26 @@ static bool _phy_sw_chnl_step_by_step(struct ieee80211_hw *hw, u8 channel,
 	u8 num_total_rfpath = rtlphy->num_total_rfpath;
 
 	precommoncmdcnt = 0;
-	_phy_set_sw_chnl_cmdarray(precommoncmd, precommoncmdcnt++,
-				  MAX_PRECMD_CNT, CMDID_SET_TXPOWEROWER_LEVEL,
-				  0, 0, 0);
-	_phy_set_sw_chnl_cmdarray(precommoncmd, precommoncmdcnt++,
-				  MAX_PRECMD_CNT, CMDID_END, 0, 0, 0);
+	rtl8723_phy_set_sw_chnl_cmdarray(precommoncmd, precommoncmdcnt++,
+					 MAX_PRECMD_CNT, CMDID_SET_TXPOWEROWER_LEVEL,
+					 0, 0, 0);
+	rtl8723_phy_set_sw_chnl_cmdarray(precommoncmd, precommoncmdcnt++,
+					 MAX_PRECMD_CNT, CMDID_END, 0, 0, 0);
 	postcommoncmdcnt = 0;
 
-	_phy_set_sw_chnl_cmdarray(postcommoncmd, postcommoncmdcnt++,
-				  MAX_POSTCMD_CNT, CMDID_END, 0, 0, 0);
+	rtl8723_phy_set_sw_chnl_cmdarray(postcommoncmd, postcommoncmdcnt++,
+					 MAX_POSTCMD_CNT, CMDID_END, 0, 0, 0);
 	rfdependcmdcnt = 0;
 
 	RT_ASSERT((channel >= 1 && channel <= 14),
 		  "illegal channel for Zebra: %d\n", channel);
 
-	_phy_set_sw_chnl_cmdarray(rfdependcmd, rfdependcmdcnt++,
-				  MAX_RFDEPENDCMD_CNT, CMDID_RF_WRITEREG,
+	rtl8723_phy_set_sw_chnl_cmdarray(rfdependcmd, rfdependcmdcnt++,
+					 MAX_RFDEPENDCMD_CNT, CMDID_RF_WRITEREG,
 				  RF_CHNLBW, channel, 10);
 
-	_phy_set_sw_chnl_cmdarray(rfdependcmd, rfdependcmdcnt++,
-				  MAX_RFDEPENDCMD_CNT, CMDID_END, 0, 0, 0);
+	rtl8723_phy_set_sw_chnl_cmdarray(rfdependcmd, rfdependcmdcnt++,
+					 MAX_RFDEPENDCMD_CNT, CMDID_END, 0, 0, 0);
 
 	do {
 		switch (*stage) {
@@ -1204,29 +961,6 @@ static bool _phy_sw_chnl_step_by_step(struct ieee80211_hw *hw, u8 channel,
 	return false;
 }
 
-static bool _phy_set_sw_chnl_cmdarray(struct swchnlcmd *cmdtable,
-				      u32 cmdtableidx, u32 cmdtablesz,
-				      enum swchnlcmd_id cmdid, u32 para1,
-				      u32 para2, u32 msdelay)
-{
-	struct swchnlcmd *pcmd;
-
-	if (cmdtable == NULL) {
-		RT_ASSERT(false, "cmdtable cannot be NULL.\n");
-		return false;
-	}
-
-	if (cmdtableidx >= cmdtablesz)
-		return false;
-
-	pcmd = cmdtable + cmdtableidx;
-	pcmd->cmdid = cmdid;
-	pcmd->para1 = para1;
-	pcmd->para2 = para2;
-	pcmd->msdelay = msdelay;
-	return true;
-}
-
 static u8 _rtl8723ae_phy_path_a_iqk(struct ieee80211_hw *hw, bool config_pathb)
 {
 	u32 reg_eac, reg_e94, reg_e9c, reg_ea4;
@@ -1297,136 +1031,6 @@ static u8 _rtl8723ae_phy_path_b_iqk(struct ieee80211_hw *hw)
 	return result;
 }
 
-static void phy_path_a_fill_iqk_matrix(struct ieee80211_hw *hw, bool iqk_ok,
-				       long result[][8], u8 final_candidate,
-				       bool btxonly)
-{
-	u32 oldval_0, x, tx0_a, reg;
-	long y, tx0_c;
-
-	if (final_candidate == 0xFF) {
-		return;
-	} else if (iqk_ok) {
-		oldval_0 = (rtl_get_bbreg(hw, ROFDM0_XATXIQIMBALANCE,
-					  MASKDWORD) >> 22) & 0x3FF;
-		x = result[final_candidate][0];
-		if ((x & 0x00000200) != 0)
-			x = x | 0xFFFFFC00;
-		tx0_a = (x * oldval_0) >> 8;
-		rtl_set_bbreg(hw, ROFDM0_XATXIQIMBALANCE, 0x3FF, tx0_a);
-		rtl_set_bbreg(hw, ROFDM0_ECCATHRESHOLD, BIT(31),
-			      ((x * oldval_0 >> 7) & 0x1));
-		y = result[final_candidate][1];
-		if ((y & 0x00000200) != 0)
-			y = y | 0xFFFFFC00;
-		tx0_c = (y * oldval_0) >> 8;
-		rtl_set_bbreg(hw, ROFDM0_XCTXAFE, 0xF0000000,
-			      ((tx0_c & 0x3C0) >> 6));
-		rtl_set_bbreg(hw, ROFDM0_XATXIQIMBALANCE, 0x003F0000,
-			      (tx0_c & 0x3F));
-		rtl_set_bbreg(hw, ROFDM0_ECCATHRESHOLD, BIT(29),
-			      ((y * oldval_0 >> 7) & 0x1));
-		if (btxonly)
-			return;
-		reg = result[final_candidate][2];
-		rtl_set_bbreg(hw, ROFDM0_XARXIQIMBALANCE, 0x3FF, reg);
-		reg = result[final_candidate][3] & 0x3F;
-		rtl_set_bbreg(hw, ROFDM0_XARXIQIMBALANCE, 0xFC00, reg);
-		reg = (result[final_candidate][3] >> 6) & 0xF;
-		rtl_set_bbreg(hw, 0xca0, 0xF0000000, reg);
-	}
-}
-
-static void phy_save_adda_regs(struct ieee80211_hw *hw,
-					       u32 *addareg, u32 *addabackup,
-					       u32 registernum)
-{
-	u32 i;
-
-	for (i = 0; i < registernum; i++)
-		addabackup[i] = rtl_get_bbreg(hw, addareg[i], MASKDWORD);
-}
-
-static void phy_save_mac_regs(struct ieee80211_hw *hw, u32 *macreg,
-			      u32 *macbackup)
-{
-	struct rtl_priv *rtlpriv = rtl_priv(hw);
-	u32 i;
-
-	for (i = 0; i < (IQK_MAC_REG_NUM - 1); i++)
-		macbackup[i] = rtl_read_byte(rtlpriv, macreg[i]);
-	macbackup[i] = rtl_read_dword(rtlpriv, macreg[i]);
-}
-
-static void phy_reload_adda_regs(struct ieee80211_hw *hw, u32 *addareg,
-				 u32 *addabackup, u32 regiesternum)
-{
-	u32 i;
-
-	for (i = 0; i < regiesternum; i++)
-		rtl_set_bbreg(hw, addareg[i], MASKDWORD, addabackup[i]);
-}
-
-static void phy_reload_mac_regs(struct ieee80211_hw *hw, u32 *macreg,
-				u32 *macbackup)
-{
-	struct rtl_priv *rtlpriv = rtl_priv(hw);
-	u32 i;
-
-	for (i = 0; i < (IQK_MAC_REG_NUM - 1); i++)
-		rtl_write_byte(rtlpriv, macreg[i], (u8) macbackup[i]);
-	rtl_write_dword(rtlpriv, macreg[i], macbackup[i]);
-}
-
-static void _rtl8723ae_phy_path_adda_on(struct ieee80211_hw *hw,
-					u32 *addareg, bool is_patha_on,
-					bool is2t)
-{
-	u32 pathOn;
-	u32 i;
-
-	pathOn = is_patha_on ? 0x04db25a4 : 0x0b1b25a4;
-	if (false == is2t) {
-		pathOn = 0x0bdb25a0;
-		rtl_set_bbreg(hw, addareg[0], MASKDWORD, 0x0b1b25a0);
-	} else {
-		rtl_set_bbreg(hw, addareg[0], MASKDWORD, pathOn);
-	}
-
-	for (i = 1; i < IQK_ADDA_REG_NUM; i++)
-		rtl_set_bbreg(hw, addareg[i], MASKDWORD, pathOn);
-}
-
-static void _rtl8723ae_phy_mac_setting_calibration(struct ieee80211_hw *hw,
-						   u32 *macreg, u32 *macbackup)
-{
-	struct rtl_priv *rtlpriv = rtl_priv(hw);
-	u32 i = 0;
-
-	rtl_write_byte(rtlpriv, macreg[i], 0x3F);
-
-	for (i = 1; i < (IQK_MAC_REG_NUM - 1); i++)
-		rtl_write_byte(rtlpriv, macreg[i],
-			       (u8) (macbackup[i] & (~BIT(3))));
-	rtl_write_byte(rtlpriv, macreg[i], (u8) (macbackup[i] & (~BIT(5))));
-}
-
-static void _rtl8723ae_phy_path_a_standby(struct ieee80211_hw *hw)
-{
-	rtl_set_bbreg(hw, 0xe28, MASKDWORD, 0x0);
-	rtl_set_bbreg(hw, 0x840, MASKDWORD, 0x00010000);
-	rtl_set_bbreg(hw, 0xe28, MASKDWORD, 0x80800000);
-}
-
-static void _rtl8723ae_phy_pi_mode_switch(struct ieee80211_hw *hw, bool pi_mode)
-{
-	u32 mode;
-
-	mode = pi_mode ? 0x01000100 : 0x01000000;
-	rtl_set_bbreg(hw, 0x820, MASKDWORD, mode);
-	rtl_set_bbreg(hw, 0x828, MASKDWORD, mode);
-}
-
 static bool phy_simularity_comp(struct ieee80211_hw *hw, long result[][8],
 				u8 c1, u8 c2)
 {
@@ -1498,10 +1102,12 @@ static void _rtl8723ae_phy_iq_calibrate(struct ieee80211_hw *hw,
 	const u32 retrycount = 2;
 
 	if (t == 0) {
-		phy_save_adda_regs(hw, adda_reg, rtlphy->adda_backup, 16);
-		phy_save_mac_regs(hw, iqk_mac_reg, rtlphy->iqk_mac_backup);
+		rtl8723_save_adda_registers(hw, adda_reg, rtlphy->adda_backup,
+					    16);
+		rtl8723_phy_save_mac_registers(hw, iqk_mac_reg,
+					       rtlphy->iqk_mac_backup);
 	}
-	_rtl8723ae_phy_path_adda_on(hw, adda_reg, true, is2t);
+	rtl8723_phy_path_adda_on(hw, adda_reg, true, is2t);
 	if (t == 0) {
 		rtlphy->rfpi_enable = (u8) rtl_get_bbreg(hw,
 						 RFPGA0_XA_HSSIPARAMETER1,
@@ -1509,7 +1115,7 @@ static void _rtl8723ae_phy_iq_calibrate(struct ieee80211_hw *hw,
 	}
 
 	if (!rtlphy->rfpi_enable)
-		_rtl8723ae_phy_pi_mode_switch(hw, true);
+		rtl8723_phy_pi_mode_switch(hw, true);
 	if (t == 0) {
 		rtlphy->reg_c04 = rtl_get_bbreg(hw, 0xc04, MASKDWORD);
 		rtlphy->reg_c08 = rtl_get_bbreg(hw, 0xc08, MASKDWORD);
@@ -1522,7 +1128,7 @@ static void _rtl8723ae_phy_iq_calibrate(struct ieee80211_hw *hw,
 		rtl_set_bbreg(hw, 0x840, MASKDWORD, 0x00010000);
 		rtl_set_bbreg(hw, 0x844, MASKDWORD, 0x00010000);
 	}
-	_rtl8723ae_phy_mac_setting_calibration(hw, iqk_mac_reg,
+	rtl8723_phy_mac_setting_calibration(hw, iqk_mac_reg,
 					    rtlphy->iqk_mac_backup);
 	rtl_set_bbreg(hw, 0xb68, MASKDWORD, 0x00080000);
 	if (is2t)
@@ -1552,8 +1158,8 @@ static void _rtl8723ae_phy_iq_calibrate(struct ieee80211_hw *hw,
 	}
 
 	if (is2t) {
-		_rtl8723ae_phy_path_a_standby(hw);
-		_rtl8723ae_phy_path_adda_on(hw, adda_reg, false, is2t);
+		rtl8723_phy_path_a_standby(hw);
+		rtl8723_phy_path_adda_on(hw, adda_reg, false, is2t);
 		for (i = 0; i < retrycount; i++) {
 			pathb_ok = _rtl8723ae_phy_path_b_iqk(hw);
 			if (pathb_ok == 0x03) {
@@ -1588,9 +1194,11 @@ static void _rtl8723ae_phy_iq_calibrate(struct ieee80211_hw *hw,
 		rtl_set_bbreg(hw, 0x844, MASKDWORD, 0x00032ed3);
 	if (t != 0) {
 		if (!rtlphy->rfpi_enable)
-			_rtl8723ae_phy_pi_mode_switch(hw, false);
-		phy_reload_adda_regs(hw, adda_reg, rtlphy->adda_backup, 16);
-		phy_reload_mac_regs(hw, iqk_mac_reg, rtlphy->iqk_mac_backup);
+			rtl8723_phy_pi_mode_switch(hw, false);
+		rtl8723_phy_reload_adda_registers(hw, adda_reg,
+						  rtlphy->adda_backup, 16);
+		rtl8723_phy_reload_mac_registers(hw, iqk_mac_reg,
+						 rtlphy->iqk_mac_backup);
 	}
 }
 
@@ -1691,7 +1299,8 @@ void rtl8723ae_phy_iq_calibrate(struct ieee80211_hw *hw, bool recovery)
 	};
 
 	if (recovery) {
-		phy_reload_adda_regs(hw, iqk_bb_reg, rtlphy->iqk_bb_backup, 10);
+		rtl8723_phy_reload_adda_registers(hw, iqk_bb_reg,
+						  rtlphy->iqk_bb_backup, 10);
 		return;
 	}
 	if (start_conttx || singletone)
@@ -1756,9 +1365,10 @@ void rtl8723ae_phy_iq_calibrate(struct ieee80211_hw *hw, bool recovery)
 		rtlphy->reg_e9c = rtlphy->reg_ebc = 0x0;
 	}
 	if (reg_e94 != 0) /*&&(reg_ea4 != 0) */
-		phy_path_a_fill_iqk_matrix(hw, patha_ok, result,
-					   final_candidate, (reg_ea4 == 0));
-	phy_save_adda_regs(hw, iqk_bb_reg, rtlphy->iqk_bb_backup, 10);
+		rtl8723_phy_path_a_fill_iqk_matrix(hw, patha_ok, result,
+						   final_candidate,
+						   (reg_ea4 == 0));
+	rtl8723_save_adda_registers(hw, iqk_bb_reg, rtlphy->iqk_bb_backup, 10);
 }
 
 void rtl8723ae_phy_lc_calibrate(struct ieee80211_hw *hw)
diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/phy.h b/drivers/net/wireless/rtlwifi/rtl8723ae/phy.h
index 007ebdbbe108..cd43139ed332 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723ae/phy.h
+++ b/drivers/net/wireless/rtlwifi/rtl8723ae/phy.h
@@ -76,23 +76,6 @@
 
 #define RTL92C_MAX_PATH_NUM			2
 
-enum swchnlcmd_id {
-	CMDID_END,
-	CMDID_SET_TXPOWEROWER_LEVEL,
-	CMDID_BBREGWRITE10,
-	CMDID_WRITEPORT_ULONG,
-	CMDID_WRITEPORT_USHORT,
-	CMDID_WRITEPORT_UCHAR,
-	CMDID_RF_WRITEREG,
-};
-
-struct swchnlcmd {
-	enum swchnlcmd_id cmdid;
-	u32 para1;
-	u32 para2;
-	u32 msdelay;
-};
-
 enum hw90_block_e {
 	HW90_BLOCK_MAC = 0,
 	HW90_BLOCK_PHY0 = 1,
@@ -183,10 +166,6 @@ struct tx_power_struct {
 	u32 mcs_original_offset[4][16];
 };
 
-u32 rtl8723ae_phy_query_bb_reg(struct ieee80211_hw *hw,
-			       u32 regaddr, u32 bitmask);
-void rtl8723ae_phy_set_bb_reg(struct ieee80211_hw *hw,
-			      u32 regaddr, u32 bitmask, u32 data);
 u32 rtl8723ae_phy_query_rf_reg(struct ieee80211_hw *hw,
 			       enum radio_path rfpath, u32 regaddr,
 			       u32 bitmask);
diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/sw.c b/drivers/net/wireless/rtlwifi/rtl8723ae/sw.c
index 62b204faf773..0b97c9acebaa 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723ae/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723ae/sw.c
@@ -37,6 +37,7 @@
 #include "reg.h"
 #include "def.h"
 #include "phy.h"
+#include "../rtl8723com/phy_common.h"
 #include "dm.h"
 #include "hw.h"
 #include "sw.h"
@@ -231,8 +232,8 @@ static struct rtl_hal_ops rtl8723ae_hal_ops = {
 	.set_key = rtl8723ae_set_key,
 	.init_sw_leds = rtl8723ae_init_sw_leds,
 	.allow_all_destaddr = rtl8723ae_allow_all_destaddr,
-	.get_bbreg = rtl8723ae_phy_query_bb_reg,
-	.set_bbreg = rtl8723ae_phy_set_bb_reg,
+	.get_bbreg = rtl8723_phy_query_bb_reg,
+	.set_bbreg = rtl8723_phy_set_bb_reg,
 	.get_rfreg = rtl8723ae_phy_query_rf_reg,
 	.set_rfreg = rtl8723ae_phy_set_rf_reg,
 	.c2h_command_handle = rtl_8723e_c2h_command_handle,
diff --git a/drivers/net/wireless/rtlwifi/rtl8723com/Makefile b/drivers/net/wireless/rtlwifi/rtl8723com/Makefile
new file mode 100644
index 000000000000..00673c692e6b
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8723com/Makefile
@@ -0,0 +1,7 @@
+rtl8723-common-objs :=		\
+		main.o		\
+		phy_common.o
+
+obj-$(CONFIG_RTL8723_COMMON) += rtl8723-common.o
+
+ccflags-y += -D__CHECK_ENDIAN__
diff --git a/drivers/net/wireless/rtlwifi/rtl8723com/main.c b/drivers/net/wireless/rtlwifi/rtl8723com/main.c
new file mode 100644
index 000000000000..9014a94fac6a
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8723com/main.c
@@ -0,0 +1,33 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2014  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include <linux/module.h>
+
+
+MODULE_AUTHOR("Realtek WlanFAE	<wlanfae@realtek.com>");
+MODULE_AUTHOR("Larry Finger	<Larry.Finger@lwfinger.net>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Realtek RTL8723AE/RTL8723BE 802.11n PCI wireless common routines");
diff --git a/drivers/net/wireless/rtlwifi/rtl8723com/phy_common.c b/drivers/net/wireless/rtlwifi/rtl8723com/phy_common.c
new file mode 100644
index 000000000000..d73b659bd2b5
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8723com/phy_common.c
@@ -0,0 +1,434 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2014  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "phy_common.h"
+#include "../rtl8723ae/reg.h"
+#include <linux/module.h>
+
+/* These routines are common to RTL8723AE and RTL8723bE */
+
+u32 rtl8723_phy_query_bb_reg(struct ieee80211_hw *hw,
+			     u32 regaddr, u32 bitmask)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u32 returnvalue, originalvalue, bitshift;
+
+	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE,
+		 "regaddr(%#x), bitmask(%#x)\n", regaddr, bitmask);
+	originalvalue = rtl_read_dword(rtlpriv, regaddr);
+	bitshift = rtl8723_phy_calculate_bit_shift(bitmask);
+	returnvalue = (originalvalue & bitmask) >> bitshift;
+
+	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE,
+		 "BBR MASK = 0x%x Addr[0x%x]= 0x%x\n",
+		  bitmask, regaddr, originalvalue);
+
+	return returnvalue;
+}
+EXPORT_SYMBOL_GPL(rtl8723_phy_query_bb_reg);
+
+void rtl8723_phy_set_bb_reg(struct ieee80211_hw *hw, u32 regaddr,
+			      u32 bitmask, u32 data)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u32 originalvalue, bitshift;
+
+	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE,
+		 "regaddr(%#x), bitmask(%#x), data(%#x)\n",
+		  regaddr, bitmask, data);
+
+	if (bitmask != MASKDWORD) {
+		originalvalue = rtl_read_dword(rtlpriv, regaddr);
+		bitshift = rtl8723_phy_calculate_bit_shift(bitmask);
+		data = ((originalvalue & (~bitmask)) | (data << bitshift));
+	}
+
+	rtl_write_dword(rtlpriv, regaddr, data);
+
+	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE,
+		 "regaddr(%#x), bitmask(%#x), data(%#x)\n",
+		  regaddr, bitmask, data);
+}
+EXPORT_SYMBOL_GPL(rtl8723_phy_set_bb_reg);
+
+u32 rtl8723_phy_calculate_bit_shift(u32 bitmask)
+{
+	u32 i;
+
+	for (i = 0; i <= 31; i++) {
+		if (((bitmask >> i) & 0x1) == 1)
+			break;
+	}
+	return i;
+}
+EXPORT_SYMBOL_GPL(rtl8723_phy_calculate_bit_shift);
+
+u32 rtl8723_phy_rf_serial_read(struct ieee80211_hw *hw,
+			       enum radio_path rfpath, u32 offset)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct bb_reg_def *pphyreg = &rtlphy->phyreg_def[rfpath];
+	u32 newoffset;
+	u32 tmplong, tmplong2;
+	u8 rfpi_enable = 0;
+	u32 retvalue;
+
+	offset &= 0xff;
+	newoffset = offset;
+	if (RT_CANNOT_IO(hw)) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "return all one\n");
+		return 0xFFFFFFFF;
+	}
+	tmplong = rtl_get_bbreg(hw, RFPGA0_XA_HSSIPARAMETER2, MASKDWORD);
+	if (rfpath == RF90_PATH_A)
+		tmplong2 = tmplong;
+	else
+		tmplong2 = rtl_get_bbreg(hw, pphyreg->rfhssi_para2, MASKDWORD);
+	tmplong2 = (tmplong2 & (~BLSSIREADADDRESS)) |
+		   (newoffset << 23) | BLSSIREADEDGE;
+	rtl_set_bbreg(hw, RFPGA0_XA_HSSIPARAMETER2, MASKDWORD,
+		      tmplong & (~BLSSIREADEDGE));
+	mdelay(1);
+	rtl_set_bbreg(hw, pphyreg->rfhssi_para2, MASKDWORD, tmplong2);
+	mdelay(2);
+	if (rfpath == RF90_PATH_A)
+		rfpi_enable = (u8) rtl_get_bbreg(hw, RFPGA0_XA_HSSIPARAMETER1,
+						 BIT(8));
+	else if (rfpath == RF90_PATH_B)
+		rfpi_enable = (u8) rtl_get_bbreg(hw, RFPGA0_XB_HSSIPARAMETER1,
+						 BIT(8));
+	if (rfpi_enable)
+		retvalue = rtl_get_bbreg(hw, pphyreg->rf_rbpi,
+					 BLSSIREADBACKDATA);
+	else
+		retvalue = rtl_get_bbreg(hw, pphyreg->rf_rb,
+					 BLSSIREADBACKDATA);
+	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE,
+		 "RFR-%d Addr[0x%x]= 0x%x\n",
+		  rfpath, pphyreg->rf_rb, retvalue);
+	return retvalue;
+}
+EXPORT_SYMBOL_GPL(rtl8723_phy_rf_serial_read);
+
+void rtl8723_phy_rf_serial_write(struct ieee80211_hw *hw,
+				 enum radio_path rfpath,
+				 u32 offset, u32 data)
+{
+	u32 data_and_addr;
+	u32 newoffset;
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct bb_reg_def *pphyreg = &rtlphy->phyreg_def[rfpath];
+
+	if (RT_CANNOT_IO(hw)) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "stop\n");
+		return;
+	}
+	offset &= 0xff;
+	newoffset = offset;
+	data_and_addr = ((newoffset << 20) | (data & 0x000fffff)) & 0x0fffffff;
+	rtl_set_bbreg(hw, pphyreg->rf3wire_offset, MASKDWORD, data_and_addr);
+	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE,
+		 "RFW-%d Addr[0x%x]= 0x%x\n", rfpath,
+		   pphyreg->rf3wire_offset, data_and_addr);
+}
+EXPORT_SYMBOL_GPL(rtl8723_phy_rf_serial_write);
+
+long rtl8723_phy_txpwr_idx_to_dbm(struct ieee80211_hw *hw,
+				  enum wireless_mode wirelessmode,
+				  u8 txpwridx)
+{
+	long offset;
+	long pwrout_dbm;
+
+	switch (wirelessmode) {
+	case WIRELESS_MODE_B:
+		offset = -7;
+		break;
+	case WIRELESS_MODE_G:
+	case WIRELESS_MODE_N_24G:
+	default:
+		offset = -8;
+		break;
+	}
+	pwrout_dbm = txpwridx / 2 + offset;
+	return pwrout_dbm;
+}
+EXPORT_SYMBOL_GPL(rtl8723_phy_txpwr_idx_to_dbm);
+
+void rtl8723_phy_init_bb_rf_reg_def(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+	rtlphy->phyreg_def[RF90_PATH_A].rfintfs = RFPGA0_XAB_RFINTERFACESW;
+	rtlphy->phyreg_def[RF90_PATH_B].rfintfs = RFPGA0_XAB_RFINTERFACESW;
+	rtlphy->phyreg_def[RF90_PATH_C].rfintfs = RFPGA0_XCD_RFINTERFACESW;
+	rtlphy->phyreg_def[RF90_PATH_D].rfintfs = RFPGA0_XCD_RFINTERFACESW;
+
+	rtlphy->phyreg_def[RF90_PATH_A].rfintfi = RFPGA0_XAB_RFINTERFACERB;
+	rtlphy->phyreg_def[RF90_PATH_B].rfintfi = RFPGA0_XAB_RFINTERFACERB;
+	rtlphy->phyreg_def[RF90_PATH_C].rfintfi = RFPGA0_XCD_RFINTERFACERB;
+	rtlphy->phyreg_def[RF90_PATH_D].rfintfi = RFPGA0_XCD_RFINTERFACERB;
+
+	rtlphy->phyreg_def[RF90_PATH_A].rfintfo = RFPGA0_XA_RFINTERFACEOE;
+	rtlphy->phyreg_def[RF90_PATH_B].rfintfo = RFPGA0_XB_RFINTERFACEOE;
+
+	rtlphy->phyreg_def[RF90_PATH_A].rfintfe = RFPGA0_XA_RFINTERFACEOE;
+	rtlphy->phyreg_def[RF90_PATH_B].rfintfe = RFPGA0_XB_RFINTERFACEOE;
+
+	rtlphy->phyreg_def[RF90_PATH_A].rf3wire_offset =
+			    RFPGA0_XA_LSSIPARAMETER;
+	rtlphy->phyreg_def[RF90_PATH_B].rf3wire_offset =
+			    RFPGA0_XB_LSSIPARAMETER;
+
+	rtlphy->phyreg_def[RF90_PATH_A].rflssi_select = rFPGA0_XAB_RFPARAMETER;
+	rtlphy->phyreg_def[RF90_PATH_B].rflssi_select = rFPGA0_XAB_RFPARAMETER;
+	rtlphy->phyreg_def[RF90_PATH_C].rflssi_select = rFPGA0_XCD_RFPARAMETER;
+	rtlphy->phyreg_def[RF90_PATH_D].rflssi_select = rFPGA0_XCD_RFPARAMETER;
+
+	rtlphy->phyreg_def[RF90_PATH_A].rftxgain_stage = RFPGA0_TXGAINSTAGE;
+	rtlphy->phyreg_def[RF90_PATH_B].rftxgain_stage = RFPGA0_TXGAINSTAGE;
+	rtlphy->phyreg_def[RF90_PATH_C].rftxgain_stage = RFPGA0_TXGAINSTAGE;
+	rtlphy->phyreg_def[RF90_PATH_D].rftxgain_stage = RFPGA0_TXGAINSTAGE;
+
+	rtlphy->phyreg_def[RF90_PATH_A].rfhssi_para1 = RFPGA0_XA_HSSIPARAMETER1;
+	rtlphy->phyreg_def[RF90_PATH_B].rfhssi_para1 = RFPGA0_XB_HSSIPARAMETER1;
+
+	rtlphy->phyreg_def[RF90_PATH_A].rfhssi_para2 = RFPGA0_XA_HSSIPARAMETER2;
+	rtlphy->phyreg_def[RF90_PATH_B].rfhssi_para2 = RFPGA0_XB_HSSIPARAMETER2;
+
+	rtlphy->phyreg_def[RF90_PATH_A].rfsw_ctrl = RFPGA0_XAB_SWITCHCONTROL;
+	rtlphy->phyreg_def[RF90_PATH_B].rfsw_ctrl = RFPGA0_XAB_SWITCHCONTROL;
+	rtlphy->phyreg_def[RF90_PATH_C].rfsw_ctrl = RFPGA0_XCD_SWITCHCONTROL;
+	rtlphy->phyreg_def[RF90_PATH_D].rfsw_ctrl = RFPGA0_XCD_SWITCHCONTROL;
+
+	rtlphy->phyreg_def[RF90_PATH_A].rfagc_control1 = ROFDM0_XAAGCCORE1;
+	rtlphy->phyreg_def[RF90_PATH_B].rfagc_control1 = ROFDM0_XBAGCCORE1;
+	rtlphy->phyreg_def[RF90_PATH_C].rfagc_control1 = ROFDM0_XCAGCCORE1;
+	rtlphy->phyreg_def[RF90_PATH_D].rfagc_control1 = ROFDM0_XDAGCCORE1;
+
+	rtlphy->phyreg_def[RF90_PATH_A].rfagc_control2 = ROFDM0_XAAGCCORE2;
+	rtlphy->phyreg_def[RF90_PATH_B].rfagc_control2 = ROFDM0_XBAGCCORE2;
+	rtlphy->phyreg_def[RF90_PATH_C].rfagc_control2 = ROFDM0_XCAGCCORE2;
+	rtlphy->phyreg_def[RF90_PATH_D].rfagc_control2 = ROFDM0_XDAGCCORE2;
+
+	rtlphy->phyreg_def[RF90_PATH_A].rfrxiq_imbal = ROFDM0_XARXIQIMBALANCE;
+	rtlphy->phyreg_def[RF90_PATH_B].rfrxiq_imbal = ROFDM0_XBRXIQIMBALANCE;
+	rtlphy->phyreg_def[RF90_PATH_C].rfrxiq_imbal = ROFDM0_XCRXIQIMBANLANCE;
+	rtlphy->phyreg_def[RF90_PATH_D].rfrxiq_imbal = ROFDM0_XDRXIQIMBALANCE;
+
+	rtlphy->phyreg_def[RF90_PATH_A].rfrx_afe = ROFDM0_XARXAFE;
+	rtlphy->phyreg_def[RF90_PATH_B].rfrx_afe = ROFDM0_XBRXAFE;
+	rtlphy->phyreg_def[RF90_PATH_C].rfrx_afe = ROFDM0_XCRXAFE;
+	rtlphy->phyreg_def[RF90_PATH_D].rfrx_afe = ROFDM0_XDRXAFE;
+
+	rtlphy->phyreg_def[RF90_PATH_A].rftxiq_imbal = ROFDM0_XATXIQIMBALANCE;
+	rtlphy->phyreg_def[RF90_PATH_B].rftxiq_imbal = ROFDM0_XBTXIQIMBALANCE;
+	rtlphy->phyreg_def[RF90_PATH_C].rftxiq_imbal = ROFDM0_XCTXIQIMBALANCE;
+	rtlphy->phyreg_def[RF90_PATH_D].rftxiq_imbal = ROFDM0_XDTXIQIMBALANCE;
+
+	rtlphy->phyreg_def[RF90_PATH_A].rftx_afe = ROFDM0_XATXAFE;
+	rtlphy->phyreg_def[RF90_PATH_B].rftx_afe = ROFDM0_XBTXAFE;
+	rtlphy->phyreg_def[RF90_PATH_C].rftx_afe = ROFDM0_XCTXAFE;
+	rtlphy->phyreg_def[RF90_PATH_D].rftx_afe = ROFDM0_XDTXAFE;
+
+	rtlphy->phyreg_def[RF90_PATH_A].rf_rb = RFPGA0_XA_LSSIREADBACK;
+	rtlphy->phyreg_def[RF90_PATH_B].rf_rb = RFPGA0_XB_LSSIREADBACK;
+	rtlphy->phyreg_def[RF90_PATH_C].rf_rb = RFPGA0_XC_LSSIREADBACK;
+	rtlphy->phyreg_def[RF90_PATH_D].rf_rb = RFPGA0_XD_LSSIREADBACK;
+
+	rtlphy->phyreg_def[RF90_PATH_A].rf_rbpi = TRANSCEIVEA_HSPI_READBACK;
+	rtlphy->phyreg_def[RF90_PATH_B].rf_rbpi = TRANSCEIVEB_HSPI_READBACK;
+}
+EXPORT_SYMBOL_GPL(rtl8723_phy_init_bb_rf_reg_def);
+
+bool rtl8723_phy_set_sw_chnl_cmdarray(struct swchnlcmd *cmdtable,
+				      u32 cmdtableidx,
+				      u32 cmdtablesz,
+				      enum swchnlcmd_id cmdid,
+				      u32 para1, u32 para2,
+				      u32 msdelay)
+{
+	struct swchnlcmd *pcmd;
+
+	if (cmdtable == NULL) {
+		RT_ASSERT(false, "cmdtable cannot be NULL.\n");
+		return false;
+	}
+
+	if (cmdtableidx >= cmdtablesz)
+		return false;
+
+	pcmd = cmdtable + cmdtableidx;
+	pcmd->cmdid = cmdid;
+	pcmd->para1 = para1;
+	pcmd->para2 = para2;
+	pcmd->msdelay = msdelay;
+	return true;
+}
+EXPORT_SYMBOL_GPL(rtl8723_phy_set_sw_chnl_cmdarray);
+
+void rtl8723_phy_path_a_fill_iqk_matrix(struct ieee80211_hw *hw,
+					bool iqk_ok,
+					long result[][8],
+					u8 final_candidate,
+					bool btxonly)
+{
+	u32 oldval_0, x, tx0_a, reg;
+	long y, tx0_c;
+
+	if (final_candidate == 0xFF) {
+		return;
+	} else if (iqk_ok) {
+		oldval_0 = (rtl_get_bbreg(hw, ROFDM0_XATXIQIMBALANCE,
+					  MASKDWORD) >> 22) & 0x3FF;
+		x = result[final_candidate][0];
+		if ((x & 0x00000200) != 0)
+			x = x | 0xFFFFFC00;
+		tx0_a = (x * oldval_0) >> 8;
+		rtl_set_bbreg(hw, ROFDM0_XATXIQIMBALANCE, 0x3FF, tx0_a);
+		rtl_set_bbreg(hw, ROFDM0_ECCATHRESHOLD, BIT(31),
+			      ((x * oldval_0 >> 7) & 0x1));
+		y = result[final_candidate][1];
+		if ((y & 0x00000200) != 0)
+			y = y | 0xFFFFFC00;
+		tx0_c = (y * oldval_0) >> 8;
+		rtl_set_bbreg(hw, ROFDM0_XCTXAFE, 0xF0000000,
+			      ((tx0_c & 0x3C0) >> 6));
+		rtl_set_bbreg(hw, ROFDM0_XATXIQIMBALANCE, 0x003F0000,
+			      (tx0_c & 0x3F));
+		rtl_set_bbreg(hw, ROFDM0_ECCATHRESHOLD, BIT(29),
+			      ((y * oldval_0 >> 7) & 0x1));
+		if (btxonly)
+			return;
+		reg = result[final_candidate][2];
+		rtl_set_bbreg(hw, ROFDM0_XARXIQIMBALANCE, 0x3FF, reg);
+		reg = result[final_candidate][3] & 0x3F;
+		rtl_set_bbreg(hw, ROFDM0_XARXIQIMBALANCE, 0xFC00, reg);
+		reg = (result[final_candidate][3] >> 6) & 0xF;
+		rtl_set_bbreg(hw, 0xca0, 0xF0000000, reg);
+	}
+}
+EXPORT_SYMBOL_GPL(rtl8723_phy_path_a_fill_iqk_matrix);
+
+void rtl8723_save_adda_registers(struct ieee80211_hw *hw, u32 *addareg,
+				 u32 *addabackup, u32 registernum)
+{
+	u32 i;
+
+	for (i = 0; i < registernum; i++)
+		addabackup[i] = rtl_get_bbreg(hw, addareg[i], MASKDWORD);
+}
+EXPORT_SYMBOL_GPL(rtl8723_save_adda_registers);
+
+void rtl8723_phy_save_mac_registers(struct ieee80211_hw *hw,
+				    u32 *macreg, u32 *macbackup)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u32 i;
+
+	for (i = 0; i < (IQK_MAC_REG_NUM - 1); i++)
+		macbackup[i] = rtl_read_byte(rtlpriv, macreg[i]);
+	macbackup[i] = rtl_read_dword(rtlpriv, macreg[i]);
+}
+EXPORT_SYMBOL_GPL(rtl8723_phy_save_mac_registers);
+
+void rtl8723_phy_reload_adda_registers(struct ieee80211_hw *hw,
+				       u32 *addareg, u32 *addabackup,
+				       u32 regiesternum)
+{
+	u32 i;
+
+	for (i = 0; i < regiesternum; i++)
+		rtl_set_bbreg(hw, addareg[i], MASKDWORD, addabackup[i]);
+}
+EXPORT_SYMBOL_GPL(rtl8723_phy_reload_adda_registers);
+
+void rtl8723_phy_reload_mac_registers(struct ieee80211_hw *hw,
+				      u32 *macreg, u32 *macbackup)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u32 i;
+
+	for (i = 0; i < (IQK_MAC_REG_NUM - 1); i++)
+		rtl_write_byte(rtlpriv, macreg[i], (u8) macbackup[i]);
+	rtl_write_dword(rtlpriv, macreg[i], macbackup[i]);
+}
+EXPORT_SYMBOL_GPL(rtl8723_phy_reload_mac_registers);
+
+void rtl8723_phy_path_adda_on(struct ieee80211_hw *hw, u32 *addareg,
+			      bool is_patha_on, bool is2t)
+{
+	u32 pathon;
+	u32 i;
+
+	pathon = is_patha_on ? 0x04db25a4 : 0x0b1b25a4;
+	if (!is2t) {
+		pathon = 0x0bdb25a0;
+		rtl_set_bbreg(hw, addareg[0], MASKDWORD, 0x0b1b25a0);
+	} else {
+		rtl_set_bbreg(hw, addareg[0], MASKDWORD, pathon);
+	}
+
+	for (i = 1; i < IQK_ADDA_REG_NUM; i++)
+		rtl_set_bbreg(hw, addareg[i], MASKDWORD, pathon);
+}
+EXPORT_SYMBOL_GPL(rtl8723_phy_path_adda_on);
+
+void rtl8723_phy_mac_setting_calibration(struct ieee80211_hw *hw,
+					 u32 *macreg, u32 *macbackup)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u32 i = 0;
+
+	rtl_write_byte(rtlpriv, macreg[i], 0x3F);
+
+	for (i = 1; i < (IQK_MAC_REG_NUM - 1); i++)
+		rtl_write_byte(rtlpriv, macreg[i],
+			       (u8) (macbackup[i] & (~BIT(3))));
+	rtl_write_byte(rtlpriv, macreg[i], (u8) (macbackup[i] & (~BIT(5))));
+}
+EXPORT_SYMBOL_GPL(rtl8723_phy_mac_setting_calibration);
+
+void rtl8723_phy_path_a_standby(struct ieee80211_hw *hw)
+{
+	rtl_set_bbreg(hw, 0xe28, MASKDWORD, 0x0);
+	rtl_set_bbreg(hw, 0x840, MASKDWORD, 0x00010000);
+	rtl_set_bbreg(hw, 0xe28, MASKDWORD, 0x80800000);
+}
+EXPORT_SYMBOL_GPL(rtl8723_phy_path_a_standby);
+
+void rtl8723_phy_pi_mode_switch(struct ieee80211_hw *hw, bool pi_mode)
+{
+	u32 mode;
+
+	mode = pi_mode ? 0x01000100 : 0x01000000;
+	rtl_set_bbreg(hw, 0x820, MASKDWORD, mode);
+	rtl_set_bbreg(hw, 0x828, MASKDWORD, mode);
+}
+EXPORT_SYMBOL_GPL(rtl8723_phy_pi_mode_switch);
diff --git a/drivers/net/wireless/rtlwifi/rtl8723com/phy_common.h b/drivers/net/wireless/rtlwifi/rtl8723com/phy_common.h
index 8f451d0584df..83b891a9adb8 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723com/phy_common.h
+++ b/drivers/net/wireless/rtlwifi/rtl8723com/phy_common.h
@@ -26,6 +26,25 @@
 #ifndef __PHY_COMMON__
 #define __PHY_COMMON__
 
+#define RT_CANNOT_IO(hw)			false
+
+enum swchnlcmd_id {
+	CMDID_END,
+	CMDID_SET_TXPOWEROWER_LEVEL,
+	CMDID_BBREGWRITE10,
+	CMDID_WRITEPORT_ULONG,
+	CMDID_WRITEPORT_USHORT,
+	CMDID_WRITEPORT_UCHAR,
+	CMDID_RF_WRITEREG,
+};
+
+struct swchnlcmd {
+	enum swchnlcmd_id cmdid;
+	u32 para1;
+	u32 para2;
+	u32 msdelay;
+};
+
 u32 rtl8723_phy_query_bb_reg(struct ieee80211_hw *hw,
 			     u32 regaddr, u32 bitmask);
 void rtl8723_phy_set_bb_reg(struct ieee80211_hw *hw, u32 regaddr,
@@ -36,11 +55,6 @@ u32 rtl8723_phy_rf_serial_read(struct ieee80211_hw *hw,
 void rtl8723_phy_rf_serial_write(struct ieee80211_hw *hw,
 				 enum radio_path rfpath,
 				 u32 offset, u32 data);
-u32 rtl8723_phy_query_bb_reg(struct ieee80211_hw *hw,
-			     u32 regaddr, u32 bitmask);
-u32 rtl8723_phy_calculate_bit_shift(u32 bitmask);
-void rtl8723_phy_set_bb_reg(struct ieee80211_hw *hw, u32 regaddr,
-			    u32 bitmask, u32 data);
 long rtl8723_phy_txpwr_idx_to_dbm(struct ieee80211_hw *hw,
 				  enum wireless_mode wirelessmode,
 				  u8 txpwridx);
@@ -58,8 +72,8 @@ void rtl8723_phy_path_a_fill_iqk_matrix(struct ieee80211_hw *hw,
 					bool btxonly);
 void rtl8723_save_adda_registers(struct ieee80211_hw *hw, u32 *addareg,
 				 u32 *addabackup, u32 registernum);
-static void rtl8723_phy_save_mac_registers(struct ieee80211_hw *hw,
-					   u32 *macreg, u32 *macbackup);
+void rtl8723_phy_save_mac_registers(struct ieee80211_hw *hw,
+				    u32 *macreg, u32 *macbackup);
 void rtl8723_phy_reload_adda_registers(struct ieee80211_hw *hw,
 				       u32 *addareg, u32 *addabackup,
 				       u32 regiesternum);
-- 
cgit v1.2.2


From cbd0c8512f3b06c86849c554eb092862c46885d5 Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Fri, 28 Feb 2014 15:16:48 -0600
Subject: rtlwifi: rtl8723ae: rtl8723-common: Copy common firmware code

The drivers for RTL8723AE and RTL8723BE have some code in common.
This commit copies the common firmware routines into the shared
code.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtlwifi/rtl8723ae/def.h       |   5 -
 drivers/net/wireless/rtlwifi/rtl8723ae/fw.c        | 260 +---------
 drivers/net/wireless/rtlwifi/rtl8723ae/fw.h        |  18 +-
 .../wireless/rtlwifi/rtl8723ae/hal_bt_coexist.c    |   2 +
 drivers/net/wireless/rtlwifi/rtl8723ae/hal_btc.c   |   1 +
 drivers/net/wireless/rtlwifi/rtl8723ae/hw.c        |   3 +-
 drivers/net/wireless/rtlwifi/rtl8723ae/sw.c        |   8 +
 drivers/net/wireless/rtlwifi/rtl8723com/Makefile   |   1 +
 .../net/wireless/rtlwifi/rtl8723com/fw_common.c    | 540 +--------------------
 .../net/wireless/rtlwifi/rtl8723com/fw_common.h    | 106 +++-
 drivers/net/wireless/rtlwifi/wifi.h                |   3 +
 11 files changed, 142 insertions(+), 805 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/def.h b/drivers/net/wireless/rtlwifi/rtl8723ae/def.h
index 8c110356dff9..debe261a7eeb 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723ae/def.h
+++ b/drivers/net/wireless/rtlwifi/rtl8723ae/def.h
@@ -46,11 +46,6 @@
 #define E_CUT_VERSION			BIT(14)
 #define	RF_RL_ID			(BIT(31)|BIT(30)|BIT(29)|BIT(28))
 
-enum version_8723e {
-	VERSION_TEST_UMC_CHIP_8723 = 0x0081,
-	VERSION_NORMAL_UMC_CHIP_8723_1T1R_A_CUT = 0x0089,
-	VERSION_NORMAL_UMC_CHIP_8723_1T1R_B_CUT = 0x1089,
-};
 
 /* MASK */
 #define IC_TYPE_MASK			(BIT(0)|BIT(1)|BIT(2))
diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/fw.c b/drivers/net/wireless/rtlwifi/rtl8723ae/fw.c
index ba1502b172a6..728b7563ad36 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723ae/fw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723ae/fw.c
@@ -34,199 +34,7 @@
 #include "reg.h"
 #include "def.h"
 #include "fw.h"
-
-static void _rtl8723ae_enable_fw_download(struct ieee80211_hw *hw, bool enable)
-{
-	struct rtl_priv *rtlpriv = rtl_priv(hw);
-	u8 tmp;
-	if (enable) {
-		tmp = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN + 1);
-		rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, tmp | 0x04);
-
-		tmp = rtl_read_byte(rtlpriv, REG_MCUFWDL);
-		rtl_write_byte(rtlpriv, REG_MCUFWDL, tmp | 0x01);
-
-		tmp = rtl_read_byte(rtlpriv, REG_MCUFWDL + 2);
-		rtl_write_byte(rtlpriv, REG_MCUFWDL + 2, tmp & 0xf7);
-	} else {
-		tmp = rtl_read_byte(rtlpriv, REG_MCUFWDL);
-		rtl_write_byte(rtlpriv, REG_MCUFWDL, tmp & 0xfe);
-
-		rtl_write_byte(rtlpriv, REG_MCUFWDL + 1, 0x00);
-	}
-}
-
-static void _rtl8723ae_fw_block_write(struct ieee80211_hw *hw,
-				      const u8 *buffer, u32 size)
-{
-	struct rtl_priv *rtlpriv = rtl_priv(hw);
-	u32 blockSize = sizeof(u32);
-	u8 *bufferPtr = (u8 *) buffer;
-	u32 *pu4BytePtr = (u32 *) buffer;
-	u32 i, offset, blockCount, remainSize;
-
-	blockCount = size / blockSize;
-	remainSize = size % blockSize;
-
-	for (i = 0; i < blockCount; i++) {
-		offset = i * blockSize;
-		rtl_write_dword(rtlpriv, (FW_8192C_START_ADDRESS + offset),
-				*(pu4BytePtr + i));
-	}
-
-	if (remainSize) {
-		offset = blockCount * blockSize;
-		bufferPtr += offset;
-		for (i = 0; i < remainSize; i++) {
-			rtl_write_byte(rtlpriv, (FW_8192C_START_ADDRESS +
-						 offset + i), *(bufferPtr + i));
-		}
-	}
-}
-
-static void _rtl8723ae_fw_page_write(struct ieee80211_hw *hw,
-				     u32 page, const u8 *buffer, u32 size)
-{
-	struct rtl_priv *rtlpriv = rtl_priv(hw);
-	u8 value8;
-	u8 u8page = (u8) (page & 0x07);
-
-	value8 = (rtl_read_byte(rtlpriv, REG_MCUFWDL + 2) & 0xF8) | u8page;
-
-	rtl_write_byte(rtlpriv, (REG_MCUFWDL + 2), value8);
-	_rtl8723ae_fw_block_write(hw, buffer, size);
-}
-
-static void _rtl8723ae_write_fw(struct ieee80211_hw *hw,
-				enum version_8723e version, u8 *buffer,
-				u32 size)
-{
-	struct rtl_priv *rtlpriv = rtl_priv(hw);
-	u8 *bufferPtr = (u8 *) buffer;
-	u32 page_nums, remain_size;
-	u32 page, offset;
-
-	RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE, "FW size is %d bytes,\n", size);
-
-	page_nums = size / FW_8192C_PAGE_SIZE;
-	remain_size = size % FW_8192C_PAGE_SIZE;
-
-	if (page_nums > 6) {
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 "Page numbers should not be greater then 6\n");
-	}
-
-	for (page = 0; page < page_nums; page++) {
-		offset = page * FW_8192C_PAGE_SIZE;
-		_rtl8723ae_fw_page_write(hw, page, (bufferPtr + offset),
-					 FW_8192C_PAGE_SIZE);
-	}
-
-	if (remain_size) {
-		offset = page_nums * FW_8192C_PAGE_SIZE;
-		page = page_nums;
-		_rtl8723ae_fw_page_write(hw, page, (bufferPtr + offset),
-					 remain_size);
-	}
-
-	RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE, "FW write done.\n");
-}
-
-static int _rtl8723ae_fw_free_to_go(struct ieee80211_hw *hw)
-{
-	struct rtl_priv *rtlpriv = rtl_priv(hw);
-	int err = -EIO;
-	u32 counter = 0;
-	u32 value32;
-
-	do {
-		value32 = rtl_read_dword(rtlpriv, REG_MCUFWDL);
-	} while ((counter++ < FW_8192C_POLLING_TIMEOUT_COUNT) &&
-		 (!(value32 & FWDL_ChkSum_rpt)));
-
-	if (counter >= FW_8192C_POLLING_TIMEOUT_COUNT) {
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 "chksum report faill ! REG_MCUFWDL:0x%08x .\n",
-			 value32);
-		goto exit;
-	}
-
-	RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE,
-		 "Checksum report OK ! REG_MCUFWDL:0x%08x .\n", value32);
-
-	value32 = rtl_read_dword(rtlpriv, REG_MCUFWDL);
-	value32 |= MCUFWDL_RDY;
-	value32 &= ~WINTINI_RDY;
-	rtl_write_dword(rtlpriv, REG_MCUFWDL, value32);
-
-	counter = 0;
-
-	do {
-		value32 = rtl_read_dword(rtlpriv, REG_MCUFWDL);
-		if (value32 & WINTINI_RDY) {
-			RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE,
-				 "Polling FW ready success!! REG_MCUFWDL:0x%08x .\n",
-				 value32);
-			err = 0;
-			goto exit;
-		}
-
-		mdelay(FW_8192C_POLLING_DELAY);
-
-	} while (counter++ < FW_8192C_POLLING_TIMEOUT_COUNT);
-
-	RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-		 "Polling FW ready fail!! REG_MCUFWDL:0x%08x .\n", value32);
-
-exit:
-	return err;
-}
-
-int rtl8723ae_download_fw(struct ieee80211_hw *hw)
-{
-	struct rtl_priv *rtlpriv = rtl_priv(hw);
-	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
-	struct rtl8723ae_firmware_header *pfwheader;
-	u8 *pfwdata;
-	u32 fwsize;
-	int err;
-	enum version_8723e version = rtlhal->version;
-
-	if (!rtlhal->pfirmware)
-		return 1;
-
-	pfwheader = (struct rtl8723ae_firmware_header *)rtlhal->pfirmware;
-	pfwdata = (u8 *) rtlhal->pfirmware;
-	fwsize = rtlhal->fwsize;
-
-	if (IS_FW_HEADER_EXIST(pfwheader)) {
-		RT_TRACE(rtlpriv, COMP_FW, DBG_DMESG,
-			 "Firmware Version(%d), Signature(%#x),Size(%d)\n",
-			 pfwheader->version, pfwheader->signature,
-			 (int)sizeof(struct rtl8723ae_firmware_header));
-
-		pfwdata = pfwdata + sizeof(struct rtl8723ae_firmware_header);
-		fwsize = fwsize - sizeof(struct rtl8723ae_firmware_header);
-	}
-
-	if (rtl_read_byte(rtlpriv, REG_MCUFWDL)&BIT(7)) {
-		rtl8723ae_firmware_selfreset(hw);
-		rtl_write_byte(rtlpriv, REG_MCUFWDL, 0x00);
-	}
-	_rtl8723ae_enable_fw_download(hw, true);
-	_rtl8723ae_write_fw(hw, version, pfwdata, fwsize);
-	_rtl8723ae_enable_fw_download(hw, false);
-
-	err = _rtl8723ae_fw_free_to_go(hw);
-	if (err) {
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 "Firmware is not ready to run!\n");
-	} else {
-		RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE,
-			 "Firmware is ready to run!\n");
-	}
-	return 0;
-}
+#include "../rtl8723com/fw_common.h"
 
 static bool rtl8723ae_check_fw_read_last_h2c(struct ieee80211_hw *hw, u8 boxnum)
 {
@@ -463,50 +271,6 @@ void rtl8723ae_fill_h2c_cmd(struct ieee80211_hw *hw,
 	return;
 }
 
-void rtl8723ae_firmware_selfreset(struct ieee80211_hw *hw)
-{
-	u8 u1tmp;
-	u8 delay = 100;
-	struct rtl_priv *rtlpriv = rtl_priv(hw);
-
-	rtl_write_byte(rtlpriv, REG_HMETFR + 3, 0x20);
-	u1tmp = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN + 1);
-
-	while (u1tmp & BIT(2)) {
-		delay--;
-		if (delay == 0)
-			break;
-		udelay(50);
-		u1tmp = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN + 1);
-	}
-	if (delay == 0) {
-		u1tmp = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN + 1);
-		rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, u1tmp&(~BIT(2)));
-	}
-}
-
-void rtl8723ae_set_fw_pwrmode_cmd(struct ieee80211_hw *hw, u8 mode)
-{
-	struct rtl_priv *rtlpriv = rtl_priv(hw);
-	u8 u1_h2c_set_pwrmode[3] = { 0 };
-	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
-
-	RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD, "FW LPS mode = %d\n", mode);
-
-	SET_H2CCMD_PWRMODE_PARM_MODE(u1_h2c_set_pwrmode, mode);
-	SET_H2CCMD_PWRMODE_PARM_SMART_PS(u1_h2c_set_pwrmode,
-					 (rtlpriv->mac80211.p2p) ?
-					 ppsc->smart_ps : 1);
-	SET_H2CCMD_PWRMODE_PARM_BCN_PASS_TIME(u1_h2c_set_pwrmode,
-					      ppsc->reg_max_lps_awakeintvl);
-
-	RT_PRINT_DATA(rtlpriv, COMP_CMD, DBG_DMESG,
-		      "rtl8723ae_set_fw_rsvdpagepkt(): u1_h2c_set_pwrmode\n",
-		      u1_h2c_set_pwrmode, 3);
-	rtl8723ae_fill_h2c_cmd(hw, H2C_SETPWRMODE, 3, u1_h2c_set_pwrmode);
-
-}
-
 static bool _rtl8723ae_cmd_send_packet(struct ieee80211_hw *hw,
 				       struct sk_buff *skb)
 {
@@ -812,7 +576,6 @@ void rtl8723ae_set_p2p_ps_offload_cmd(struct ieee80211_hw *hw, u8 p2p_ps_state)
 			rtl_write_byte(rtlpriv, REG_DUAL_TSF_RST, BIT(4));
 
 			p2p_ps_offload->offload_en = 1;
-
 			if (P2P_ROLE_GO == rtlpriv->mac80211.p2p) {
 				p2p_ps_offload->role = 1;
 				p2p_ps_offload->allstasleep = 0;
@@ -836,3 +599,24 @@ void rtl8723ae_set_p2p_ps_offload_cmd(struct ieee80211_hw *hw, u8 p2p_ps_state)
 	}
 	rtl8723ae_fill_h2c_cmd(hw, H2C_P2P_PS_OFFLOAD, 1, (u8 *)p2p_ps_offload);
 }
+
+void rtl8723ae_set_fw_pwrmode_cmd(struct ieee80211_hw *hw, u8 mode)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8 u1_h2c_set_pwrmode[3] = { 0 };
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+
+	RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD, "FW LPS mode = %d\n", mode);
+
+	SET_H2CCMD_PWRMODE_PARM_MODE(u1_h2c_set_pwrmode, mode);
+	SET_H2CCMD_PWRMODE_PARM_SMART_PS_23A(u1_h2c_set_pwrmode,
+					     (rtlpriv->mac80211.p2p) ?
+					     ppsc->smart_ps : 1);
+	SET_H2CCMD_PWRMODE_PARM_BCN_PASS_TIME(u1_h2c_set_pwrmode,
+					      ppsc->reg_max_lps_awakeintvl);
+
+	RT_PRINT_DATA(rtlpriv, COMP_CMD, DBG_DMESG,
+		      "rtl8723ae_set_fw_rsvdpagepkt(): u1_h2c_set_pwrmode\n",
+		      u1_h2c_set_pwrmode, 3);
+	rtl8723ae_fill_h2c_cmd(hw, H2C_SETPWRMODE, 3, u1_h2c_set_pwrmode);
+}
diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/fw.h b/drivers/net/wireless/rtlwifi/rtl8723ae/fw.h
index ed3b795e6980..d355b85dd9fe 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723ae/fw.h
+++ b/drivers/net/wireless/rtlwifi/rtl8723ae/fw.h
@@ -34,7 +34,7 @@
 #define FW_8192C_END_ADDRESS			0x3FFF
 #define FW_8192C_PAGE_SIZE			4096
 #define FW_8192C_POLLING_DELAY			5
-#define FW_8192C_POLLING_TIMEOUT_COUNT		1000
+#define FW_8192C_POLLING_TIMEOUT_COUNT		6000
 
 #define BEACON_PG				0
 #define PSPOLL_PG				2
@@ -65,21 +65,9 @@ struct rtl8723ae_firmware_header {
 	u32 rsvd5;
 };
 
-enum rtl8192c_h2c_cmd {
-	H2C_AP_OFFLOAD = 0,
-	H2C_SETPWRMODE = 1,
-	H2C_JOINBSSRPT = 2,
-	H2C_RSVDPAGE = 3,
-	H2C_RSSI_REPORT = 4,
-	H2C_P2P_PS_CTW_CMD = 5,
-	H2C_P2P_PS_OFFLOAD = 6,
-	H2C_RA_MASK = 7,
-	MAX_H2CCMD
-};
-
 #define SET_H2CCMD_PWRMODE_PARM_MODE(__ph2ccmd, __val)			\
 	SET_BITS_TO_LE_1BYTE(__ph2ccmd, 0, 8, __val)
-#define SET_H2CCMD_PWRMODE_PARM_SMART_PS(__ph2ccmd, __val)		\
+#define SET_H2CCMD_PWRMODE_PARM_SMART_PS_23A(__ph2ccmd, __val)		\
 	SET_BITS_TO_LE_1BYTE((__ph2ccmd)+1, 0, 8, __val)
 #define SET_H2CCMD_PWRMODE_PARM_BCN_PASS_TIME(__ph2ccmd, __val)	\
 	SET_BITS_TO_LE_1BYTE((__ph2ccmd)+2, 0, 8, __val)
@@ -92,10 +80,8 @@ enum rtl8192c_h2c_cmd {
 #define SET_H2CCMD_RSVDPAGE_LOC_NULL_DATA(__ph2ccmd, __val)		\
 	SET_BITS_TO_LE_1BYTE((__ph2ccmd)+2, 0, 8, __val)
 
-int rtl8723ae_download_fw(struct ieee80211_hw *hw);
 void rtl8723ae_fill_h2c_cmd(struct ieee80211_hw *hw, u8 element_id,
 			    u32 cmd_len, u8 *p_cmdbuffer);
-void rtl8723ae_firmware_selfreset(struct ieee80211_hw *hw);
 void rtl8723ae_set_fw_pwrmode_cmd(struct ieee80211_hw *hw, u8 mode);
 void rtl8723ae_set_fw_rsvdpagepkt(struct ieee80211_hw *hw, bool b_dl_finished);
 void rtl8723ae_set_fw_joinbss_report_cmd(struct ieee80211_hw *hw, u8 mstatus);
diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/hal_bt_coexist.c b/drivers/net/wireless/rtlwifi/rtl8723ae/hal_bt_coexist.c
index 3d092e4b0b7f..48fee1be78c2 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723ae/hal_bt_coexist.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723ae/hal_bt_coexist.c
@@ -31,6 +31,8 @@
 #include "../pci.h"
 #include "dm.h"
 #include "fw.h"
+#include "../rtl8723com/fw_common.h"
+#include "../rtl8723com/fw_common.h"
 #include "phy.h"
 #include "reg.h"
 #include "hal_btc.h"
diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/hal_btc.c b/drivers/net/wireless/rtlwifi/rtl8723ae/hal_btc.c
index 8b64b1cd3176..5d534df8d90c 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723ae/hal_btc.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723ae/hal_btc.c
@@ -32,6 +32,7 @@
 #include "phy.h"
 #include "../rtl8723com/phy_common.h"
 #include "fw.h"
+#include "../rtl8723com/fw_common.h"
 #include "reg.h"
 #include "def.h"
 
diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c b/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c
index 914b36f72d55..7eff1c51539c 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c
@@ -39,6 +39,7 @@
 #include "phy.h"
 #include "dm.h"
 #include "fw.h"
+#include "../rtl8723com/fw_common.h"
 #include "led.h"
 #include "hw.h"
 #include "pwrseqcmd.h"
@@ -890,7 +891,7 @@ int rtl8723ae_hw_init(struct ieee80211_hw *hw)
 		return err;
 	}
 
-	err = rtl8723ae_download_fw(hw);
+	err = rtl8723_download_fw(hw, false);
 	if (err) {
 		RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
 			 "Failed to download FW. Init HW without FW now..\n");
diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/sw.c b/drivers/net/wireless/rtlwifi/rtl8723ae/sw.c
index 0b97c9acebaa..1087a3bd07fa 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723ae/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723ae/sw.c
@@ -40,6 +40,8 @@
 #include "../rtl8723com/phy_common.h"
 #include "dm.h"
 #include "hw.h"
+#include "fw.h"
+#include "../rtl8723com/fw_common.h"
 #include "sw.h"
 #include "trx.h"
 #include "led.h"
@@ -194,6 +196,11 @@ void rtl8723ae_deinit_sw_vars(struct ieee80211_hw *hw)
 	}
 }
 
+static bool is_fw_header(struct rtl92c_firmware_header *hdr)
+{
+	return (hdr->signature & 0xfff0) == 0x2300;
+}
+
 static struct rtl_hal_ops rtl8723ae_hal_ops = {
 	.init_sw_vars = rtl8723ae_init_sw_vars,
 	.deinit_sw_vars = rtl8723ae_deinit_sw_vars,
@@ -239,6 +246,7 @@ static struct rtl_hal_ops rtl8723ae_hal_ops = {
 	.c2h_command_handle = rtl_8723e_c2h_command_handle,
 	.bt_wifi_media_status_notify = rtl_8723e_bt_wifi_media_status_notify,
 	.bt_coex_off_before_lps = rtl8723ae_bt_coex_off_before_lps,
+	.is_fw_header = is_fw_header,
 };
 
 static struct rtl_mod_params rtl8723ae_mod_params = {
diff --git a/drivers/net/wireless/rtlwifi/rtl8723com/Makefile b/drivers/net/wireless/rtlwifi/rtl8723com/Makefile
index 00673c692e6b..97c7eaceb430 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723com/Makefile
+++ b/drivers/net/wireless/rtlwifi/rtl8723com/Makefile
@@ -1,5 +1,6 @@
 rtl8723-common-objs :=		\
 		main.o		\
+		fw_common.o	\
 		phy_common.o
 
 obj-$(CONFIG_RTL8723_COMMON) += rtl8723-common.o
diff --git a/drivers/net/wireless/rtlwifi/rtl8723com/fw_common.c b/drivers/net/wireless/rtlwifi/rtl8723com/fw_common.c
index 83ca4e25ee50..32c390ffc7d2 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723com/fw_common.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723com/fw_common.c
@@ -24,126 +24,11 @@
  *****************************************************************************/
 
 #include "../wifi.h"
+#include "../pci.h"
+#include "../base.h"
 #include "fw_common.h"
 #include <linux/module.h>
 
-#define BEACON_PG		0 /* ->1 */
-#define PSPOLL_PG		2
-#define NULL_PG			3
-#define PROBERSP_PG		4 /* ->5 */
-
-#define TOTAL_RESERVED_PKT_LEN	768
-
-static u8 reserved_page_packet[TOTAL_RESERVED_PKT_LEN] = {
-	/* page 0 beacon */
-	0x80, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF,
-	0xFF, 0xFF, 0x00, 0xE0, 0x4C, 0x02, 0xB1, 0x78,
-	0xEC, 0x1A, 0x59, 0x0B, 0xAD, 0xD4, 0x20, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x64, 0x00, 0x10, 0x04, 0x00, 0x05, 0x54, 0x65,
-	0x73, 0x74, 0x32, 0x01, 0x08, 0x82, 0x84, 0x0B,
-	0x16, 0x24, 0x30, 0x48, 0x6C, 0x03, 0x01, 0x06,
-	0x06, 0x02, 0x00, 0x00, 0x2A, 0x01, 0x02, 0x32,
-	0x04, 0x0C, 0x12, 0x18, 0x60, 0x2D, 0x1A, 0x6C,
-	0x09, 0x03, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x3D, 0x00, 0xDD, 0x07, 0x00, 0xE0, 0x4C,
-	0x02, 0x02, 0x00, 0x00, 0xDD, 0x18, 0x00, 0x50,
-	0xF2, 0x01, 0x01, 0x00, 0x00, 0x50, 0xF2, 0x04,
-	0x01, 0x00, 0x00, 0x50, 0xF2, 0x04, 0x01, 0x00,
-
-	/* page 1 beacon */
-	0x00, 0x50, 0xF2, 0x02, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x10, 0x00, 0x28, 0x8C, 0x00, 0x12, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x81, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-
-	/* page 2  ps-poll */
-	0xA4, 0x10, 0x01, 0xC0, 0xEC, 0x1A, 0x59, 0x0B,
-	0xAD, 0xD4, 0x00, 0xE0, 0x4C, 0x02, 0xB1, 0x78,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x18, 0x00, 0x28, 0x8C, 0x00, 0x12, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-
-	/* page 3  null */
-	0x48, 0x01, 0x00, 0x00, 0xEC, 0x1A, 0x59, 0x0B,
-	0xAD, 0xD4, 0x00, 0xE0, 0x4C, 0x02, 0xB1, 0x78,
-	0xEC, 0x1A, 0x59, 0x0B, 0xAD, 0xD4, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x72, 0x00, 0x28, 0x8C, 0x00, 0x12, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-
-	/* page 4  probe_resp */
-	0x50, 0x00, 0x00, 0x00, 0x00, 0x40, 0x10, 0x10,
-	0x00, 0x03, 0x00, 0xE0, 0x4C, 0x76, 0x00, 0x42,
-	0x00, 0x40, 0x10, 0x10, 0x00, 0x03, 0x00, 0x00,
-	0x9E, 0x46, 0x15, 0x32, 0x27, 0xF2, 0x2D, 0x00,
-	0x64, 0x00, 0x00, 0x04, 0x00, 0x0C, 0x6C, 0x69,
-	0x6E, 0x6B, 0x73, 0x79, 0x73, 0x5F, 0x77, 0x6C,
-	0x61, 0x6E, 0x01, 0x04, 0x82, 0x84, 0x8B, 0x96,
-	0x03, 0x01, 0x01, 0x06, 0x02, 0x00, 0x00, 0x2A,
-	0x01, 0x00, 0x32, 0x08, 0x24, 0x30, 0x48, 0x6C,
-	0x0C, 0x12, 0x18, 0x60, 0x2D, 0x1A, 0x6C, 0x18,
-	0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x3D, 0x00, 0xDD, 0x06, 0x00, 0xE0, 0x4C, 0x02,
-	0x01, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-
-	/* page 5  probe_resp */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-};
-
 void rtl8723_enable_fw_download(struct ieee80211_hw *hw, bool enable)
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
@@ -226,7 +111,7 @@ static void rtl8723_fill_dummy(u8 *pfwbuf, u32 *pfwlen)
 }
 
 void rtl8723_write_fw(struct ieee80211_hw *hw,
-		      enum version_8723be version,
+		      enum version_8723e version,
 		      u8 *buffer, u32 size)
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
@@ -236,7 +121,7 @@ void rtl8723_write_fw(struct ieee80211_hw *hw,
 
 	RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD, "FW size is %d bytes,\n", size);
 
-	_rtl8723be_fill_dummy(bufferptr, &size);
+	rtl8723_fill_dummy(bufferptr, &size);
 
 	pagenums = size / FW_8192C_PAGE_SIZE;
 	remainsize = size % FW_8192C_PAGE_SIZE;
@@ -319,15 +204,14 @@ int rtl8723_fw_free_to_go(struct ieee80211_hw *hw, bool is_8723be)
 
 	if (counter >= FW_8192C_POLLING_TIMEOUT_COUNT) {
 		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 "chksum report faill ! REG_MCUFWDL:0x%08x .\n",
+			 "chksum report fail ! REG_MCUFWDL:0x%08x .\n",
 			 value32);
 		goto exit;
 	}
 	RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE,
 		 "Checksum report OK ! REG_MCUFWDL:0x%08x .\n", value32);
 
-	value32 = rtl_read_dword(rtlpriv, REG_MCUFWDL);
-	value32 |= MCUFWDL_RDY;
+	value32 = rtl_read_dword(rtlpriv, REG_MCUFWDL) | MCUFWDL_RDY;
 	value32 &= ~WINTINI_RDY;
 	rtl_write_dword(rtlpriv, REG_MCUFWDL, value32);
 
@@ -378,8 +262,8 @@ int rtl8723_download_fw(struct ieee80211_hw *hw,
 	RT_TRACE(rtlpriv, COMP_FW, DBG_DMESG,
 		 "normal Firmware SIZE %d\n", fwsize);
 
-	if (IS_FW_HEADER_EXIST(pfwheader)) {
-		RT_TRACE(rtlpriv, COMP_FW, DBG_DMESG,
+	if (rtlpriv->cfg->ops->is_fw_header(pfwheader)) {
+		RT_TRACE(rtlpriv, COMP_FW, DBG_EMERG,
 			 "Firmware Version(%d), Signature(%#x), Size(%d)\n",
 			 pfwheader->version, pfwheader->signature,
 			 (int)sizeof(struct rtl92c_firmware_header));
@@ -394,9 +278,9 @@ int rtl8723_download_fw(struct ieee80211_hw *hw,
 		else
 			rtl8723ae_firmware_selfreset(hw);
 	}
-	rtl8723_enable_fw_download(hw, is_8723be);
+	rtl8723_enable_fw_download(hw, true);
 	rtl8723_write_fw(hw, version, pfwdata, fwsize);
-	rtl8723_enable_fw_download(hw, is_8723be);
+	rtl8723_enable_fw_download(hw, false);
 
 	err = rtl8723_fw_free_to_go(hw, is_8723be);
 	if (err) {
@@ -410,219 +294,6 @@ int rtl8723_download_fw(struct ieee80211_hw *hw,
 }
 EXPORT_SYMBOL_GPL(rtl8723_download_fw);
 
-bool rtl8723_check_fw_read_last_h2c(struct ieee80211_hw *hw, u8 boxnum)
-{
-	struct rtl_priv *rtlpriv = rtl_priv(hw);
-	u8 val_hmetfr, val_mcutst_1;
-	bool result = false;
-
-	val_hmetfr = rtl_read_byte(rtlpriv, REG_HMETFR);
-	val_mcutst_1 = rtl_read_byte(rtlpriv, (REG_MCUTST_1 + boxnum));
-
-	if (((val_hmetfr >> boxnum) & BIT(0)) == 0 && val_mcutst_1 == 0)
-		result = true;
-	return result;
-}
-EXPORT_SYMBOL_GPL(rtl8723_check_fw_read_last_h2c);
-
-void rtl8723_fill_h2c_command(struct ieee80211_hw *hw, u8 element_id,
-			      u32 cmd_len, u8 *p_cmdbuffer)
-{
-	struct rtl_priv *rtlpriv = rtl_priv(hw);
-	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
-	u8 boxnum;
-	u16 box_reg = 0, box_extreg = 0;
-	u8 u1b_tmp;
-	bool isfw_read = false;
-	u8 buf_index = 0;
-	bool bwrite_sucess = false;
-	u8 wait_h2c_limit = 100;
-	u8 wait_writeh2c_limit = 100;
-	u8 boxcontent[4], boxextcontent[4];
-	u32 h2c_waitcounter = 0;
-	unsigned long flag;
-	u8 idx;
-
-	RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD, "come in\n");
-
-	while (true) {
-		spin_lock_irqsave(&rtlpriv->locks.h2c_lock, flag);
-		if (rtlhal->h2c_setinprogress) {
-			RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
-				 "H2C set in progress! Wait to set.."
-				 "element_id(%d).\n", element_id);
-
-			while (rtlhal->h2c_setinprogress) {
-				spin_unlock_irqrestore(&rtlpriv->locks.h2c_lock,
-						       flag);
-				h2c_waitcounter++;
-				RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
-					 "Wait 100 us (%d times)...\n",
-					 h2c_waitcounter);
-				udelay(100);
-
-				if (h2c_waitcounter > 1000)
-					return;
-				spin_lock_irqsave(&rtlpriv->locks.h2c_lock,
-						  flag);
-			}
-			spin_unlock_irqrestore(&rtlpriv->locks.h2c_lock, flag);
-		} else {
-			rtlhal->h2c_setinprogress = true;
-			spin_unlock_irqrestore(&rtlpriv->locks.h2c_lock, flag);
-			break;
-		}
-	}
-	while (!bwrite_sucess) {
-		wait_writeh2c_limit--;
-		if (wait_writeh2c_limit == 0) {
-			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-				 "Write H2C fail because no trigger "
-				 "for FW INT!\n");
-			break;
-		}
-		boxnum = rtlhal->last_hmeboxnum;
-		switch (boxnum) {
-		case 0:
-			box_reg = REG_HMEBOX_0;
-			box_extreg = REG_HMEBOX_EXT_0;
-			break;
-		case 1:
-			box_reg = REG_HMEBOX_1;
-			box_extreg = REG_HMEBOX_EXT_1;
-			break;
-		case 2:
-			box_reg = REG_HMEBOX_2;
-			box_extreg = REG_HMEBOX_EXT_2;
-			break;
-		case 3:
-			box_reg = REG_HMEBOX_3;
-			box_extreg = REG_HMEBOX_EXT_3;
-			break;
-		default:
-			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-				 "switch case not processed\n");
-			break;
-		}
-		isfw_read = rtl8723_check_fw_read_last_h2c(hw, boxnum);
-		while (!isfw_read) {
-			wait_h2c_limit--;
-			if (wait_h2c_limit == 0) {
-				RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
-					 "Waiting too long for FW read "
-					 "clear HMEBox(%d)!\n", boxnum);
-				break;
-			}
-			udelay(10);
-
-			isfw_read = rtl8723_check_fw_read_last_h2c(hw,
-								boxnum);
-		}
-		if (!isfw_read) {
-			RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
-				 "Write H2C register BOX[%d] fail!!!!! "
-				 "Fw do not read.\n", boxnum);
-			break;
-		}
-		memset(boxcontent, 0, sizeof(boxcontent));
-		memset(boxextcontent, 0, sizeof(boxextcontent));
-		boxcontent[0] = element_id;
-		RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
-			 "Write element_id box_reg(%4x) = %2x\n",
-			 box_reg, element_id);
-
-		switch (cmd_len) {
-		case 1:
-		case 2:
-		case 3:
-			/*boxcontent[0] &= ~(BIT(7));*/
-			memcpy((u8 *)(boxcontent) + 1,
-			       p_cmdbuffer + buf_index, cmd_len);
-
-			for (idx = 0; idx < 4; idx++) {
-				rtl_write_byte(rtlpriv, box_reg + idx,
-					       boxcontent[idx]);
-			}
-			break;
-		case 4:
-		case 5:
-		case 6:
-		case 7:
-			/*boxcontent[0] |= (BIT(7));*/
-			memcpy((u8 *)(boxextcontent),
-			       p_cmdbuffer + buf_index+3, cmd_len-3);
-			memcpy((u8 *)(boxcontent) + 1,
-			       p_cmdbuffer + buf_index, 3);
-
-			for (idx = 0; idx < 4; idx++) {
-				rtl_write_byte(rtlpriv, box_extreg + idx,
-					       boxextcontent[idx]);
-			}
-			for (idx = 0; idx < 4; idx++) {
-				rtl_write_byte(rtlpriv, box_reg + idx,
-					       boxcontent[idx]);
-			}
-			break;
-		default:
-			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-				 "switch case not process\n");
-			break;
-		}
-		bwrite_sucess = true;
-
-		rtlhal->last_hmeboxnum = boxnum + 1;
-		if (rtlhal->last_hmeboxnum == 4)
-			rtlhal->last_hmeboxnum = 0;
-
-		RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
-			 "pHalData->last_hmeboxnum  = %d\n",
-			 rtlhal->last_hmeboxnum);
-	}
-	if (!rtlpriv) {
-		pr_err("rtlpriv bad\n");
-		return;
-	}
-	if (!rtlhal) {
-		pr_err("rtlhal bad\n");
-		return;
-	}
-	spin_lock_irqsave(&rtlpriv->locks.h2c_lock, flag);
-	rtlhal->h2c_setinprogress = false;
-	spin_unlock_irqrestore(&rtlpriv->locks.h2c_lock, flag);
-
-	RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD, "go out\n");
-}
-EXPORT_SYMBOL_GPL(rtl8723_fill_h2c_command);
-
-void rtl8723_fill_h2c_cmd(struct ieee80211_hw *hw, u8 element_id,
-			  u32 cmd_len, u8 *p_cmdbuffer)
-{
-	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
-	u32 tmp_cmdbuf[2];
-
-	if (!rtlhal->fw_ready) {
-		RT_ASSERT(false,
-			  "return H2C cmd because of Fw download fail!!!\n");
-		return;
-	}
-	memset(tmp_cmdbuf, 0, 8);
-	memcpy(tmp_cmdbuf, p_cmdbuffer, cmd_len);
-	rtl8723_fill_h2c_command(hw, element_id, cmd_len,
-				 (u8 *)&tmp_cmdbuf);
-	return;
-}
-EXPORT_SYMBOL_GPL(rtl8723_fill_h2c_cmd);
-
-void rtl8723_set_fw_joinbss_report_cmd(struct ieee80211_hw *hw, u8 mstatus)
-{
-	u8 u1_joinbssrpt_parm[1] = { 0 };
-
-	SET_H2CCMD_JOINBSSRPT_PARM_OPMODE(u1_joinbssrpt_parm, mstatus);
-
-	rtl8723_fill_h2c_cmd(hw, H2C_JOINBSSRPT, 1, u1_joinbssrpt_parm);
-}
-EXPORT_SYMBOL_GPL(rtl8723_set_fw_joinbss_report_cmd);
-
 bool rtl8723_cmd_send_packet(struct ieee80211_hw *hw,
 			     struct sk_buff *skb)
 {
@@ -656,194 +327,3 @@ bool rtl8723_cmd_send_packet(struct ieee80211_hw *hw,
 	return true;
 }
 EXPORT_SYMBOL_GPL(rtl8723_cmd_send_packet);
-
-void rtl8723_set_fw_rsvdpagepkt(struct ieee80211_hw *hw, bool dl_finished)
-{
-	struct rtl_priv *rtlpriv = rtl_priv(hw);
-	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
-	struct sk_buff *skb = NULL;
-
-	u32 totalpacketlen;
-	bool rtstatus;
-	u8 u1rsvdpageloc[5] = { 0 };
-	bool dlok = false;
-
-	u8 *beacon;
-	u8 *p_pspoll;
-	u8 *nullfunc;
-	u8 *p_probersp;
-	/*---------------------------------------------------------
-	 *			(1) beacon
-	 *---------------------------------------------------------
-	 */
-	beacon = &reserved_page_packet[BEACON_PG * 128];
-	SET_80211_HDR_ADDRESS2(beacon, mac->mac_addr);
-	SET_80211_HDR_ADDRESS3(beacon, mac->bssid);
-
-	/*-------------------------------------------------------
-	 *			(2) ps-poll
-	 *-------------------------------------------------------
-	 */
-	p_pspoll = &reserved_page_packet[PSPOLL_PG * 128];
-	SET_80211_PS_POLL_AID(p_pspoll, (mac->assoc_id | 0xc000));
-	SET_80211_PS_POLL_BSSID(p_pspoll, mac->bssid);
-	SET_80211_PS_POLL_TA(p_pspoll, mac->mac_addr);
-
-	SET_H2CCMD_RSVDPAGE_LOC_PSPOLL(u1rsvdpageloc, PSPOLL_PG);
-
-	/*--------------------------------------------------------
-	 *			(3) null data
-	 *--------------------------------------------------------
-	 */
-	nullfunc = &reserved_page_packet[NULL_PG * 128];
-	SET_80211_HDR_ADDRESS1(nullfunc, mac->bssid);
-	SET_80211_HDR_ADDRESS2(nullfunc, mac->mac_addr);
-	SET_80211_HDR_ADDRESS3(nullfunc, mac->bssid);
-
-	SET_H2CCMD_RSVDPAGE_LOC_NULL_DATA(u1rsvdpageloc, NULL_PG);
-
-	/*---------------------------------------------------------
-	 *			(4) probe response
-	 *---------------------------------------------------------
-	 */
-	p_probersp = &reserved_page_packet[PROBERSP_PG * 128];
-	SET_80211_HDR_ADDRESS1(p_probersp, mac->bssid);
-	SET_80211_HDR_ADDRESS2(p_probersp, mac->mac_addr);
-	SET_80211_HDR_ADDRESS3(p_probersp, mac->bssid);
-
-	SET_H2CCMD_RSVDPAGE_LOC_PROBE_RSP(u1rsvdpageloc, PROBERSP_PG);
-
-	totalpacketlen = TOTAL_RESERVED_PKT_LEN;
-
-	RT_PRINT_DATA(rtlpriv, COMP_CMD, DBG_LOUD,
-		      "rtl8723be_set_fw_rsvdpagepkt(): "
-		      "HW_VAR_SET_TX_CMD: ALL\n",
-		      &reserved_page_packet[0], totalpacketlen);
-	RT_PRINT_DATA(rtlpriv, COMP_CMD, DBG_DMESG,
-		      "rtl8723be_set_fw_rsvdpagepkt(): "
-		      "HW_VAR_SET_TX_CMD: ALL\n", u1rsvdpageloc, 3);
-
-
-	skb = dev_alloc_skb(totalpacketlen);
-	memcpy((u8 *)skb_put(skb, totalpacketlen),
-	       &reserved_page_packet, totalpacketlen);
-
-	rtstatus = rtl8723_cmd_send_packet(hw, skb);
-
-	if (rtstatus)
-		dlok = true;
-
-	if (dlok) {
-		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
-			 "Set RSVD page location to Fw.\n");
-		RT_PRINT_DATA(rtlpriv, COMP_CMD, DBG_DMESG, "H2C_RSVDPAGE:\n",
-			      u1rsvdpageloc, 3);
-		rtl8723_fill_h2c_cmd(hw, H2C_88E_RSVDPAGE,
-				     sizeof(u1rsvdpageloc), u1rsvdpageloc);
-	} else {
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
-			 "Set RSVD page location to Fw FAIL!!!!!!.\n");
-	}
-}
-EXPORT_SYMBOL_GPL(rtl8723_set_fw_rsvdpagepkt);
-
-/*Should check FW support p2p or not.*/
-void rtl8723_set_p2p_ctw_period_cmd(struct ieee80211_hw *hw, u8 ctwindow)
-{
-	u8 u1_ctwindow_period[1] = {ctwindow};
-
-	rtl8723_fill_h2c_cmd(hw, H2C_88E_P2P_PS_CTW_CMD, 1,
-			     u1_ctwindow_period);
-}
-EXPORT_SYMBOL_GPL(rtl8723_set_p2p_ctw_period_cmd);
-
-void rtl8723_set_p2p_ps_offload_cmd(struct ieee80211_hw *hw, u8 p2p_ps_state)
-{
-	struct rtl_priv *rtlpriv = rtl_priv(hw);
-	struct rtl_ps_ctl *rtlps = rtl_psc(rtl_priv(hw));
-	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
-	struct rtl_p2p_ps_info *p2pinfo = &(rtlps->p2p_ps_info);
-	struct p2p_ps_offload_t *p2p_ps_offload = &rtlhal->p2p_ps_offload;
-	u8 i;
-	u16 ctwindow;
-	u32 start_time, tsf_low;
-
-	switch (p2p_ps_state) {
-	case P2P_PS_DISABLE:
-		RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD, "P2P_PS_DISABLE\n");
-		memset(p2p_ps_offload, 0, sizeof(struct p2p_ps_offload_t *));
-		break;
-	case P2P_PS_ENABLE:
-		RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD, "P2P_PS_ENABLE\n");
-		/* update CTWindow value. */
-		if (p2pinfo->ctwindow > 0) {
-			p2p_ps_offload->ctwindow_en = 1;
-			ctwindow = p2pinfo->ctwindow;
-			rtl8723_set_p2p_ctw_period_cmd(hw, ctwindow);
-		}
-		/* hw only support 2 set of NoA */
-		for (i = 0; i < p2pinfo->noa_num; i++) {
-			/* To control the register setting
-			 * for which NOA
-			 */
-			rtl_write_byte(rtlpriv, 0x5cf, (i << 4));
-			if (i == 0)
-				p2p_ps_offload->noa0_en = 1;
-			else
-				p2p_ps_offload->noa1_en = 1;
-
-			/* config P2P NoA Descriptor Register */
-			rtl_write_dword(rtlpriv, 0x5E0,
-					p2pinfo->noa_duration[i]);
-			rtl_write_dword(rtlpriv, 0x5E4,
-					p2pinfo->noa_interval[i]);
-
-			/*Get Current TSF value */
-			tsf_low = rtl_read_dword(rtlpriv, REG_TSFTR);
-
-			start_time = p2pinfo->noa_start_time[i];
-			if (p2pinfo->noa_count_type[i] != 1) {
-				while (start_time <= (tsf_low + (50 * 1024))) {
-					start_time += p2pinfo->noa_interval[i];
-					if (p2pinfo->noa_count_type[i] != 255)
-						p2pinfo->noa_count_type[i]--;
-				}
-			}
-			rtl_write_dword(rtlpriv, 0x5E8, start_time);
-			rtl_write_dword(rtlpriv, 0x5EC,
-					p2pinfo->noa_count_type[i]);
-		}
-		if ((p2pinfo->opp_ps == 1) ||
-		    (p2pinfo->noa_num > 0)) {
-			/* rst p2p circuit */
-			rtl_write_byte(rtlpriv, REG_DUAL_TSF_RST, BIT(4));
-
-			p2p_ps_offload->offload_en = 1;
-
-			if (P2P_ROLE_GO == rtlpriv->mac80211.p2p) {
-				p2p_ps_offload->role = 1;
-				p2p_ps_offload->allstasleep = 0;
-			} else {
-				p2p_ps_offload->role = 0;
-			}
-			p2p_ps_offload->discovery = 0;
-		}
-		break;
-	case P2P_PS_SCAN:
-		RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD, "P2P_PS_SCAN\n");
-		p2p_ps_offload->discovery = 1;
-		break;
-	case P2P_PS_SCAN_DONE:
-		RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD, "P2P_PS_SCAN_DONE\n");
-		p2p_ps_offload->discovery = 0;
-		p2pinfo->p2p_ps_state = P2P_PS_ENABLE;
-		break;
-	default:
-		break;
-	}
-	rtl8723_fill_h2c_cmd(hw, H2C_88E_P2P_PS_OFFLOAD, 1,
-			     (u8 *)p2p_ps_offload);
-}
-EXPORT_SYMBOL_GPL(rtl8723_set_p2p_ps_offload_cmd);
-
-#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8723com/fw_common.h b/drivers/net/wireless/rtlwifi/rtl8723com/fw_common.h
index 0890e5deddfa..cf1cc5804d06 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723com/fw_common.h
+++ b/drivers/net/wireless/rtlwifi/rtl8723com/fw_common.h
@@ -24,27 +24,103 @@
  *****************************************************************************/
 
 #ifndef __FW_COMMON_H__
-#define __FW_COMMON_H__#endif
+#define __FW_COMMON_H__
 
+#define REG_SYS_FUNC_EN				0x0002
+#define REG_MCUFWDL				0x0080
+#define FW_8192C_START_ADDRESS			0x1000
+#define FW_8192C_PAGE_SIZE			4096
+#define FW_8192C_POLLING_TIMEOUT_COUNT		6000
+#define FW_8192C_POLLING_DELAY			5
+
+#define MCUFWDL_RDY				BIT(1)
+#define FWDL_CHKSUM_RPT				BIT(2)
+#define WINTINI_RDY				BIT(6)
+
+#define REG_RSV_CTRL				0x001C
+#define REG_HMETFR				0x01CC
+
+enum version_8723e {
+	VERSION_TEST_UMC_CHIP_8723 = 0x0081,
+	VERSION_NORMAL_UMC_CHIP_8723_1T1R_A_CUT = 0x0089,
+	VERSION_NORMAL_UMC_CHIP_8723_1T1R_B_CUT = 0x1089,
+	VERSION_TEST_CHIP_1T1R_8723B = 0x0106,
+	VERSION_NORMAL_SMIC_CHIP_1T1R_8723B = 0x010E,
+	VERSION_UNKNOWN = 0xFF,
+};
+
+enum rtl8723ae_h2c_cmd {
+	H2C_AP_OFFLOAD = 0,
+	H2C_SETPWRMODE = 1,
+	H2C_JOINBSSRPT = 2,
+	H2C_RSVDPAGE = 3,
+	H2C_RSSI_REPORT = 4,
+	H2C_P2P_PS_CTW_CMD = 5,
+	H2C_P2P_PS_OFFLOAD = 6,
+	H2C_RA_MASK = 7,
+	MAX_H2CCMD
+};
+
+enum rtl8723be_cmd {
+	H2C_8723BE_RSVDPAGE = 0,
+	H2C_8723BE_JOINBSSRPT = 1,
+	H2C_8723BE_SCAN = 2,
+	H2C_8723BE_KEEP_ALIVE_CTRL = 3,
+	H2C_8723BE_DISCONNECT_DECISION = 4,
+	H2C_8723BE_INIT_OFFLOAD = 6,
+	H2C_8723BE_AP_OFFLOAD = 8,
+	H2C_8723BE_BCN_RSVDPAGE = 9,
+	H2C_8723BE_PROBERSP_RSVDPAGE = 10,
+
+	H2C_8723BE_SETPWRMODE = 0x20,
+	H2C_8723BE_PS_TUNING_PARA = 0x21,
+	H2C_8723BE_PS_TUNING_PARA2 = 0x22,
+	H2C_8723BE_PS_LPS_PARA = 0x23,
+	H2C_8723BE_P2P_PS_OFFLOAD = 0x24,
+
+	H2C_8723BE_WO_WLAN = 0x80,
+	H2C_8723BE_REMOTE_WAKE_CTRL = 0x81,
+	H2C_8723BE_AOAC_GLOBAL_INFO = 0x82,
+	H2C_8723BE_AOAC_RSVDPAGE = 0x83,
+	H2C_8723BE_RSSI_REPORT = 0x42,
+	H2C_8723BE_RA_MASK = 0x40,
+	H2C_8723BE_SELECTIVE_SUSPEND_ROF_CMD,
+	H2C_8723BE_P2P_PS_MODE,
+	H2C_8723BE_PSD_RESULT,
+	/*Not defined CTW CMD for P2P yet*/
+	H2C_8723BE_P2P_PS_CTW_CMD,
+	MAX_8723BE_H2CCMD
+};
+
+struct rtl92c_firmware_header {
+	u16 signature;
+	u8 category;
+	u8 function;
+	u16 version;
+	u8 subversion;
+	u8 rsvd1;
+	u8 month;
+	u8 date;
+	u8 hour;
+	u8 minute;
+	u16 ramcodesize;
+	u16 rsvd2;
+	u32 svnindex;
+	u32 rsvd3;
+	u32 rsvd4;
+	u32 rsvd5;
+};
+
+void rtl8723ae_firmware_selfreset(struct ieee80211_hw *hw);
+void rtl8723be_firmware_selfreset(struct ieee80211_hw *hw);
 void rtl8723_enable_fw_download(struct ieee80211_hw *hw, bool enable);
 void rtl8723_fw_block_write(struct ieee80211_hw *hw,
 			    const u8 *buffer, u32 size);
 void rtl8723_fw_page_write(struct ieee80211_hw *hw,
 			   u32 page, const u8 *buffer, u32 size);
 void rtl8723_write_fw(struct ieee80211_hw *hw,
-		      enum version_8723be version,
+		      enum version_8723e version,
 		      u8 *buffer, u32 size);
 int rtl8723_fw_free_to_go(struct ieee80211_hw *hw, bool is_8723be);
-int rtl8723_download_fw(struct ieee80211_hw *hw,
-			bool buse_wake_on_wlan_fw, bool is_8723be);
-bool rtl8723_check_fw_read_last_h2c(struct ieee80211_hw *hw, u8 boxnum);
-void rtl8723_fill_h2c_command(struct ieee80211_hw *hw, u8 element_id,
-			      u32 cmd_len, u8 *p_cmdbuffer);
-void rtl8723_fill_h2c_cmd(struct ieee80211_hw *hw, u8 element_id,
-			  u32 cmd_len, u8 *p_cmdbuffer);
-void rtl8723_set_fw_joinbss_report_cmd(struct ieee80211_hw *hw, u8 mstatus);
-bool rtl8723_cmd_send_packet(struct ieee80211_hw *hw,
-			     struct sk_buff *skb);
-void rtl8723_set_fw_rsvdpagepkt(struct ieee80211_hw *hw, bool dl_finished);
-void rtl8723_set_p2p_ctw_period_cmd(struct ieee80211_hw *hw, u8 ctwindow);
-void rtl8723_set_p2p_ps_offload_cmd(struct ieee80211_hw *hw, u8 p2p_ps_state);
+int rtl8723_download_fw(struct ieee80211_hw *hw, bool is_8723be);
+#endif
diff --git a/drivers/net/wireless/rtlwifi/wifi.h b/drivers/net/wireless/rtlwifi/wifi.h
index 3f52bf8abe00..2304c7f23361 100644
--- a/drivers/net/wireless/rtlwifi/wifi.h
+++ b/drivers/net/wireless/rtlwifi/wifi.h
@@ -1712,6 +1712,8 @@ struct rtl_tcb_desc {
 	bool btx_enable_sw_calc_duration;
 };
 
+struct rtl92c_firmware_header;
+
 struct rtl_hal_ops {
 	int (*init_sw_vars) (struct ieee80211_hw *hw);
 	void (*deinit_sw_vars) (struct ieee80211_hw *hw);
@@ -1809,6 +1811,7 @@ struct rtl_hal_ops {
 	void (*fill_h2c_cmd) (struct ieee80211_hw *hw, u8 element_id,
 			      u32 cmd_len, u8 *p_cmdbuffer);
 	bool (*get_btc_status) (void);
+	bool (*is_fw_header) (struct rtl92c_firmware_header *hdr);
 };
 
 struct rtl_intf_ops {
-- 
cgit v1.2.2


From 57d9d9630a6b3f289ae87b1fc00e83ae44636766 Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Fri, 28 Feb 2014 15:16:49 -0600
Subject: rtlwifi: rtl8723ae: rtl8723-common: Copy common dynamic power
 management code

The drivers for RTL8723AE and RTL8723BE have some code in common.
This commit copies the common power management routines into the shared
code.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtlwifi/rtl8723ae/dm.c        | 42 ++------------
 drivers/net/wireless/rtlwifi/rtl8723ae/dm.h        |  1 -
 drivers/net/wireless/rtlwifi/rtl8723ae/hw.c        |  5 +-
 drivers/net/wireless/rtlwifi/rtl8723com/Makefile   |  1 +
 .../net/wireless/rtlwifi/rtl8723com/dm_common.c    | 65 ++++++++++++++++++++++
 .../net/wireless/rtlwifi/rtl8723com/dm_common.h    | 33 +++++++++++
 6 files changed, 106 insertions(+), 41 deletions(-)
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8723com/dm_common.c
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8723com/dm_common.h

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/dm.c b/drivers/net/wireless/rtlwifi/rtl8723ae/dm.c
index a36eee28f9e7..863ddb3e2888 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723ae/dm.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723ae/dm.c
@@ -35,6 +35,7 @@
 #include "def.h"
 #include "phy.h"
 #include "dm.h"
+#include "../rtl8723com/dm_common.h"
 #include "fw.h"
 #include "hal_btc.h"
 
@@ -483,16 +484,6 @@ static void rtl8723ae_dm_dig(struct ieee80211_hw *hw)
 	rtl8723ae_dm_ctrl_initgain_by_twoport(hw);
 }
 
-static void rtl8723ae_dm_init_dynamic_txpower(struct ieee80211_hw *hw)
-{
-	struct rtl_priv *rtlpriv = rtl_priv(hw);
-
-	rtlpriv->dm.dynamic_txpower_enable = false;
-
-	rtlpriv->dm.last_dtp_lvl = TXHIGHPWRLEVEL_NORMAL;
-	rtlpriv->dm.dynamic_txhighpower_lvl = TXHIGHPWRLEVEL_NORMAL;
-}
-
 static void rtl8723ae_dm_dynamic_txpower(struct ieee80211_hw *hw)
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
@@ -585,19 +576,6 @@ void rtl8723ae_dm_write_dig(struct ieee80211_hw *hw)
 	}
 }
 
-static void rtl8723ae_dm_pwdmonitor(struct ieee80211_hw *hw)
-{
-}
-
-void rtl8723ae_dm_init_edca_turbo(struct ieee80211_hw *hw)
-{
-	struct rtl_priv *rtlpriv = rtl_priv(hw);
-
-	rtlpriv->dm.current_turbo_edca = false;
-	rtlpriv->dm.is_any_nonbepkts = false;
-	rtlpriv->dm.is_cur_rdlstate = false;
-}
-
 static void rtl8723ae_dm_check_edca_turbo(struct ieee80211_hw *hw)
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
@@ -778,17 +756,6 @@ static void rtl8723ae_dm_refresh_rate_adaptive_mask(struct ieee80211_hw *hw)
 	}
 }
 
-static void rtl8723ae_dm_init_dynamic_bpowersaving(struct ieee80211_hw *hw)
-{
-	struct rtl_priv *rtlpriv = rtl_priv(hw);
-
-	rtlpriv->dm_pstable.pre_ccastate = CCA_MAX;
-	rtlpriv->dm_pstable.cur_ccasate = CCA_MAX;
-	rtlpriv->dm_pstable.pre_rfstate = RF_MAX;
-	rtlpriv->dm_pstable.cur_rfstate = RF_MAX;
-	rtlpriv->dm_pstable.rssi_val_min = 0;
-}
-
 void rtl8723ae_dm_rf_saving(struct ieee80211_hw *hw, u8 force_in_normal)
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
@@ -905,11 +872,11 @@ void rtl8723ae_dm_init(struct ieee80211_hw *hw)
 
 	rtlpriv->dm.dm_type = DM_TYPE_BYDRIVER;
 	rtl8723ae_dm_diginit(hw);
-	rtl8723ae_dm_init_dynamic_txpower(hw);
-	rtl8723ae_dm_init_edca_turbo(hw);
+	rtl8723_dm_init_dynamic_txpower(hw);
+	rtl8723_dm_init_edca_turbo(hw);
 	rtl8723ae_dm_init_rate_adaptive_mask(hw);
 	rtl8723ae_dm_initialize_txpower_tracking(hw);
-	rtl8723ae_dm_init_dynamic_bpowersaving(hw);
+	rtl8723_dm_init_dynamic_bb_powersaving(hw);
 }
 
 void rtl8723ae_dm_watchdog(struct ieee80211_hw *hw)
@@ -930,7 +897,6 @@ void rtl8723ae_dm_watchdog(struct ieee80211_hw *hw)
 	if ((ppsc->rfpwr_state == ERFON) &&
 	    ((!fw_current_inpsmode) && fw_ps_awake) &&
 	    (!ppsc->rfchange_inprogress)) {
-		rtl8723ae_dm_pwdmonitor(hw);
 		rtl8723ae_dm_dig(hw);
 		rtl8723ae_dm_false_alarm_counter_statistics(hw);
 		rtl8723ae_dm_dynamic_bpowersaving(hw);
diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/dm.h b/drivers/net/wireless/rtlwifi/rtl8723ae/dm.h
index a372b0204456..d253bb53d03e 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723ae/dm.h
+++ b/drivers/net/wireless/rtlwifi/rtl8723ae/dm.h
@@ -147,7 +147,6 @@ enum dm_dig_connect_e {
 void rtl8723ae_dm_init(struct ieee80211_hw *hw);
 void rtl8723ae_dm_watchdog(struct ieee80211_hw *hw);
 void rtl8723ae_dm_write_dig(struct ieee80211_hw *hw);
-void rtl8723ae_dm_init_edca_turbo(struct ieee80211_hw *hw);
 void rtl8723ae_dm_init_rate_adaptive_mask(struct ieee80211_hw *hw);
 void rtl8723ae_dm_rf_saving(struct ieee80211_hw *hw, u8 bforce_in_normal);
 void rtl8723ae_dm_bt_coexist(struct ieee80211_hw *hw);
diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c b/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c
index 7eff1c51539c..8a8577a1783b 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c
@@ -38,6 +38,7 @@
 #include "def.h"
 #include "phy.h"
 #include "dm.h"
+#include "../rtl8723com/dm_common.h"
 #include "fw.h"
 #include "../rtl8723com/fw_common.h"
 #include "led.h"
@@ -305,7 +306,7 @@ void rtl8723ae_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 		break; }
 	case HW_VAR_AC_PARAM:{
 		u8 e_aci = *((u8 *) val);
-		rtl8723ae_dm_init_edca_turbo(hw);
+		rtl8723_dm_init_edca_turbo(hw);
 
 		if (rtlpci->acm_method != EACMWAY2_SW)
 			rtlpriv->cfg->ops->set_hw_reg(hw,
@@ -1155,7 +1156,7 @@ void rtl8723ae_set_qos(struct ieee80211_hw *hw, int aci)
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
 
-	rtl8723ae_dm_init_edca_turbo(hw);
+	rtl8723_dm_init_edca_turbo(hw);
 	switch (aci) {
 	case AC1_BK:
 		rtl_write_dword(rtlpriv, REG_EDCA_BK_PARAM, 0xa44f);
diff --git a/drivers/net/wireless/rtlwifi/rtl8723com/Makefile b/drivers/net/wireless/rtlwifi/rtl8723com/Makefile
index 97c7eaceb430..345a68adcf38 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723com/Makefile
+++ b/drivers/net/wireless/rtlwifi/rtl8723com/Makefile
@@ -1,5 +1,6 @@
 rtl8723-common-objs :=		\
 		main.o		\
+		dm_common.o	\
 		fw_common.o	\
 		phy_common.o
 
diff --git a/drivers/net/wireless/rtlwifi/rtl8723com/dm_common.c b/drivers/net/wireless/rtlwifi/rtl8723com/dm_common.c
new file mode 100644
index 000000000000..4e254b72bf45
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8723com/dm_common.c
@@ -0,0 +1,65 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2014  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "dm_common.h"
+#include "../rtl8723ae/dm.h"
+#include <linux/module.h>
+
+/* These routines are common to RTL8723AE and RTL8723bE */
+
+void rtl8723_dm_init_dynamic_txpower(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	rtlpriv->dm.dynamic_txpower_enable = false;
+
+	rtlpriv->dm.last_dtp_lvl = TXHIGHPWRLEVEL_NORMAL;
+	rtlpriv->dm.dynamic_txhighpower_lvl = TXHIGHPWRLEVEL_NORMAL;
+}
+EXPORT_SYMBOL_GPL(rtl8723_dm_init_dynamic_txpower);
+
+void rtl8723_dm_init_edca_turbo(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	rtlpriv->dm.current_turbo_edca = false;
+	rtlpriv->dm.is_any_nonbepkts = false;
+	rtlpriv->dm.is_cur_rdlstate = false;
+}
+EXPORT_SYMBOL_GPL(rtl8723_dm_init_edca_turbo);
+
+void rtl8723_dm_init_dynamic_bb_powersaving(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	rtlpriv->dm_pstable.pre_ccastate = CCA_MAX;
+	rtlpriv->dm_pstable.cur_ccasate = CCA_MAX;
+	rtlpriv->dm_pstable.pre_rfstate = RF_MAX;
+	rtlpriv->dm_pstable.cur_rfstate = RF_MAX;
+	rtlpriv->dm_pstable.rssi_val_min = 0;
+	rtlpriv->dm_pstable.initialize = 0;
+}
+EXPORT_SYMBOL_GPL(rtl8723_dm_init_dynamic_bb_powersaving);
diff --git a/drivers/net/wireless/rtlwifi/rtl8723com/dm_common.h b/drivers/net/wireless/rtlwifi/rtl8723com/dm_common.h
new file mode 100644
index 000000000000..5c1b94ce2f86
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8723com/dm_common.h
@@ -0,0 +1,33 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2014  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __DM_COMMON_H__
+#define __DM_COMMON_H__
+
+void rtl8723_dm_init_dynamic_txpower(struct ieee80211_hw *hw);
+void rtl8723_dm_init_edca_turbo(struct ieee80211_hw *hw);
+void rtl8723_dm_init_dynamic_bb_powersaving(struct ieee80211_hw *hw);
+
+#endif
-- 
cgit v1.2.2


From a619d1abe20cc892ddd8f6f60345b24d43971fb4 Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Fri, 28 Feb 2014 15:16:50 -0600
Subject: rtlwifi: rtl8723be: Add new driver

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtlwifi/Kconfig               |   19 +-
 drivers/net/wireless/rtlwifi/Makefile              |    1 +
 drivers/net/wireless/rtlwifi/rtl8723be/Makefile    |   20 +
 drivers/net/wireless/rtlwifi/rtl8723be/def.h       |  248 ++
 drivers/net/wireless/rtlwifi/rtl8723be/dm.c        | 1325 ++++++++++
 drivers/net/wireless/rtlwifi/rtl8723be/dm.h        |  310 +++
 drivers/net/wireless/rtlwifi/rtl8723be/fw.c        |  628 +++++
 drivers/net/wireless/rtlwifi/rtl8723be/fw.h        |  248 ++
 drivers/net/wireless/rtlwifi/rtl8723be/hw.c        | 2529 ++++++++++++++++++++
 drivers/net/wireless/rtlwifi/rtl8723be/hw.h        |   64 +
 drivers/net/wireless/rtlwifi/rtl8723be/led.c       |  153 ++
 drivers/net/wireless/rtlwifi/rtl8723be/led.h       |   35 +
 drivers/net/wireless/rtlwifi/rtl8723be/phy.c       | 2175 +++++++++++++++++
 drivers/net/wireless/rtlwifi/rtl8723be/phy.h       |  217 ++
 drivers/net/wireless/rtlwifi/rtl8723be/pwrseq.c    |  106 +
 drivers/net/wireless/rtlwifi/rtl8723be/pwrseq.h    |  305 +++
 drivers/net/wireless/rtlwifi/rtl8723be/pwrseqcmd.c |  140 ++
 drivers/net/wireless/rtlwifi/rtl8723be/pwrseqcmd.h |   95 +
 drivers/net/wireless/rtlwifi/rtl8723be/reg.h       | 2293 ++++++++++++++++++
 drivers/net/wireless/rtlwifi/rtl8723be/rf.c        |  504 ++++
 drivers/net/wireless/rtlwifi/rtl8723be/rf.h        |   43 +
 drivers/net/wireless/rtlwifi/rtl8723be/sw.c        |  385 +++
 drivers/net/wireless/rtlwifi/rtl8723be/sw.h        |   35 +
 drivers/net/wireless/rtlwifi/rtl8723be/table.c     |  572 +++++
 drivers/net/wireless/rtlwifi/rtl8723be/table.h     |   43 +
 drivers/net/wireless/rtlwifi/rtl8723be/trx.c       |  959 ++++++++
 drivers/net/wireless/rtlwifi/rtl8723be/trx.h       |  616 +++++
 27 files changed, 14065 insertions(+), 3 deletions(-)
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8723be/Makefile
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8723be/def.h
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8723be/dm.c
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8723be/dm.h
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8723be/fw.c
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8723be/fw.h
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8723be/hw.c
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8723be/hw.h
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8723be/led.c
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8723be/led.h
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8723be/phy.c
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8723be/phy.h
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8723be/pwrseq.c
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8723be/pwrseq.h
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8723be/pwrseqcmd.c
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8723be/pwrseqcmd.h
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8723be/reg.h
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8723be/rf.c
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8723be/rf.h
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8723be/sw.c
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8723be/sw.h
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8723be/table.c
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8723be/table.h
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8723be/trx.c
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8723be/trx.h

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtlwifi/Kconfig b/drivers/net/wireless/rtlwifi/Kconfig
index 9251e0d3685c..bf3cf124e4ea 100644
--- a/drivers/net/wireless/rtlwifi/Kconfig
+++ b/drivers/net/wireless/rtlwifi/Kconfig
@@ -5,7 +5,7 @@ menuconfig RTL_CARDS
 	---help---
 	  This option will enable support for the Realtek mac80211-based
 	  wireless drivers. Drivers rtl8192ce, rtl8192cu, rtl8192se, rtl8192de,
-	  rtl8723ae, and rtl8188ae share some common code.
+	  rtl8723ae, rtl8723be, and rtl8188ae share some common code.
 
 if RTL_CARDS
 
@@ -56,6 +56,19 @@ config RTL8723AE
 
 	If you choose to build it as a module, it will be called rtl8723ae
 
+config RTL8723BE
+	tristate "Realtek RTL8723BE PCIe Wireless Network Adapter"
+	depends on PCI
+	select RTLWIFI
+	select RTLWIFI_PCI
+	select RTL8723_COMMON
+	select RTLBTCOEXIST
+	---help---
+	This is the driver for Realtek RTL8723BE 802.11n PCIe
+	wireless network adapters.
+
+	If you choose to build it as a module, it will be called rtl8723be
+
 config RTL8188EE
 	tristate "Realtek RTL8188EE Wireless Network Adapter"
 	depends on PCI
@@ -105,12 +118,12 @@ config RTL8192C_COMMON
 
 config RTL8723_COMMON
 	tristate
-	depends on RTL8723AE
+	depends on RTL8723AE || RTL8723BE
 	default y
 
 config RTLBTCOEXIST
 	tristate
-	depends on RTL8723AE
+	depends on RTL8723AE || RTL8723BE
 	default y
 
 endif
diff --git a/drivers/net/wireless/rtlwifi/Makefile b/drivers/net/wireless/rtlwifi/Makefile
index d97d1b9d2427..bba36a06abcc 100644
--- a/drivers/net/wireless/rtlwifi/Makefile
+++ b/drivers/net/wireless/rtlwifi/Makefile
@@ -24,6 +24,7 @@ obj-$(CONFIG_RTL8192CU)		+= rtl8192cu/
 obj-$(CONFIG_RTL8192SE)		+= rtl8192se/
 obj-$(CONFIG_RTL8192DE)		+= rtl8192de/
 obj-$(CONFIG_RTL8723AE)		+= rtl8723ae/
+obj-$(CONFIG_RTL8723BE)		+= rtl8723be/
 obj-$(CONFIG_RTL8188EE)		+= rtl8188ee/
 obj-$(CONFIG_RTLBTCOEXIST)	+= btcoexist/
 obj-$(CONFIG_RTL8723_COMMON)	+= rtl8723com/
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/Makefile b/drivers/net/wireless/rtlwifi/rtl8723be/Makefile
new file mode 100644
index 000000000000..4a75aab0539a
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/Makefile
@@ -0,0 +1,20 @@
+obj-m := rtl8723be.o
+
+
+rtl8723be-objs :=		\
+		dm.o		\
+		fw.o		\
+		hw.o		\
+		led.o		\
+		phy.o		\
+		pwrseq.o	\
+		pwrseqcmd.o	\
+		rf.o		\
+		sw.o		\
+		table.o		\
+		trx.o		\
+
+
+obj-$(CONFIG_RTL8723BE) += rtl8723be.o
+
+ccflags-y += -D__CHECK_ENDIAN__
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/def.h b/drivers/net/wireless/rtlwifi/rtl8723be/def.h
new file mode 100644
index 000000000000..3c30b74e983d
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/def.h
@@ -0,0 +1,248 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2014  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __RTL8723BE_DEF_H__
+#define __RTL8723BE_DEF_H__
+
+#define HAL_RETRY_LIMIT_INFRA				48
+#define HAL_RETRY_LIMIT_AP_ADHOC			7
+
+#define RESET_DELAY_8185				20
+
+#define RT_IBSS_INT_MASKS	(IMR_BCNINT | IMR_TBDOK | IMR_TBDER)
+#define RT_AC_INT_MASKS		(IMR_VIDOK | IMR_VODOK | IMR_BEDOK|IMR_BKDOK)
+
+#define NUM_OF_FIRMWARE_QUEUE			10
+#define NUM_OF_PAGES_IN_FW			0x100
+#define NUM_OF_PAGE_IN_FW_QUEUE_BK		0x07
+#define NUM_OF_PAGE_IN_FW_QUEUE_BE		0x07
+#define NUM_OF_PAGE_IN_FW_QUEUE_VI		0x07
+#define NUM_OF_PAGE_IN_FW_QUEUE_VO		0x07
+#define NUM_OF_PAGE_IN_FW_QUEUE_HCCA		0x0
+#define NUM_OF_PAGE_IN_FW_QUEUE_CMD		0x0
+#define NUM_OF_PAGE_IN_FW_QUEUE_MGNT		0x02
+#define NUM_OF_PAGE_IN_FW_QUEUE_HIGH		0x02
+#define NUM_OF_PAGE_IN_FW_QUEUE_BCN		0x2
+#define NUM_OF_PAGE_IN_FW_QUEUE_PUB		0xA1
+
+#define NUM_OF_PAGE_IN_FW_QUEUE_BK_DTM		0x026
+#define NUM_OF_PAGE_IN_FW_QUEUE_BE_DTM		0x048
+#define NUM_OF_PAGE_IN_FW_QUEUE_VI_DTM		0x048
+#define NUM_OF_PAGE_IN_FW_QUEUE_VO_DTM		0x026
+#define NUM_OF_PAGE_IN_FW_QUEUE_PUB_DTM		0x00
+
+#define MAX_LINES_HWCONFIG_TXT			1000
+#define MAX_BYTES_LINE_HWCONFIG_TXT		256
+
+#define SW_THREE_WIRE				0
+#define HW_THREE_WIRE				2
+
+#define BT_DEMO_BOARD				0
+#define BT_QA_BOARD				1
+#define BT_FPGA					2
+
+#define HAL_PRIME_CHNL_OFFSET_DONT_CARE		0
+#define HAL_PRIME_CHNL_OFFSET_LOWER		1
+#define HAL_PRIME_CHNL_OFFSET_UPPER		2
+
+#define MAX_H2C_QUEUE_NUM			10
+
+#define RX_MPDU_QUEUE				0
+#define RX_CMD_QUEUE				1
+#define RX_MAX_QUEUE				2
+#define AC2QUEUEID(_AC)				(_AC)
+
+#define	C2H_RX_CMD_HDR_LEN			8
+#define	GET_C2H_CMD_CMD_LEN(__prxhdr)		\
+	LE_BITS_TO_4BYTE((__prxhdr), 0, 16)
+#define	GET_C2H_CMD_ELEMENT_ID(__prxhdr)	\
+	LE_BITS_TO_4BYTE((__prxhdr), 16, 8)
+#define	GET_C2H_CMD_CMD_SEQ(__prxhdr)		\
+	LE_BITS_TO_4BYTE((__prxhdr), 24, 7)
+#define	GET_C2H_CMD_CONTINUE(__prxhdr)		\
+	LE_BITS_TO_4BYTE((__prxhdr), 31, 1)
+#define	GET_C2H_CMD_CONTENT(__prxhdr)		\
+	((u8 *)(__prxhdr) + C2H_RX_CMD_HDR_LEN)
+
+#define	GET_C2H_CMD_FEEDBACK_ELEMENT_ID(__pcmdfbhdr)	\
+	LE_BITS_TO_4BYTE((__pcmdfbhdr), 0, 8)
+#define	GET_C2H_CMD_FEEDBACK_CCX_LEN(__pcmdfbhdr)	\
+	LE_BITS_TO_4BYTE((__pcmdfbhdr), 8, 8)
+#define	GET_C2H_CMD_FEEDBACK_CCX_CMD_CNT(__pcmdfbhdr)	\
+	LE_BITS_TO_4BYTE((__pcmdfbhdr), 16, 16)
+#define	GET_C2H_CMD_FEEDBACK_CCX_MAC_ID(__pcmdfbhdr)	\
+	LE_BITS_TO_4BYTE(((__pcmdfbhdr) + 4), 0, 5)
+#define	GET_C2H_CMD_FEEDBACK_CCX_VALID(__pcmdfbhdr)	\
+	LE_BITS_TO_4BYTE(((__pcmdfbhdr) + 4), 7, 1)
+#define	GET_C2H_CMD_FEEDBACK_CCX_RETRY_CNT(__pcmdfbhdr)	\
+	LE_BITS_TO_4BYTE(((__pcmdfbhdr) + 4), 8, 5)
+#define	GET_C2H_CMD_FEEDBACK_CCX_TOK(__pcmdfbhdr)	\
+	LE_BITS_TO_4BYTE(((__pcmdfbhdr) + 4), 15, 1)
+#define	GET_C2H_CMD_FEEDBACK_CCX_QSEL(__pcmdfbhdr)	\
+	LE_BITS_TO_4BYTE(((__pcmdfbhdr) + 4), 16, 4)
+#define	GET_C2H_CMD_FEEDBACK_CCX_SEQ(__pcmdfbhdr)	\
+	LE_BITS_TO_4BYTE(((__pcmdfbhdr) + 4), 20, 12)
+
+#define CHIP_BONDING_IDENTIFIER(_value)	(((_value)>>22)&0x3)
+#define	CHIP_BONDING_92C_1T2R		0x1
+
+#define CHIP_8723			BIT(0)
+#define CHIP_8723B			(BIT(1) | BIT(2))
+#define NORMAL_CHIP			BIT(3)
+#define RF_TYPE_1T1R			(~(BIT(4) | BIT(5) | BIT(6)))
+#define RF_TYPE_1T2R			BIT(4)
+#define RF_TYPE_2T2R			BIT(5)
+#define CHIP_VENDOR_UMC			BIT(7)
+#define B_CUT_VERSION			BIT(12)
+#define C_CUT_VERSION			BIT(13)
+#define D_CUT_VERSION			((BIT(12) | BIT(13)))
+#define E_CUT_VERSION			BIT(14)
+#define	RF_RL_ID			(BIT(31) | BIT(30) | BIT(29) | BIT(28))
+
+/* MASK */
+#define IC_TYPE_MASK			(BIT(0) | BIT(1) | BIT(2))
+#define CHIP_TYPE_MASK			BIT(3)
+#define RF_TYPE_MASK			(BIT(4) | BIT(5) | BIT(6))
+#define MANUFACTUER_MASK		BIT(7)
+#define ROM_VERSION_MASK		(BIT(11) | BIT(10) | BIT(9) | BIT(8))
+#define CUT_VERSION_MASK		(BIT(15) | BIT(14) | BIT(13) | BIT(12))
+
+/* Get element */
+#define GET_CVID_IC_TYPE(version)	((version) & IC_TYPE_MASK)
+#define GET_CVID_CHIP_TYPE(version)	((version) & CHIP_TYPE_MASK)
+#define GET_CVID_RF_TYPE(version)	((version) & RF_TYPE_MASK)
+#define GET_CVID_MANUFACTUER(version)	((version) & MANUFACTUER_MASK)
+#define GET_CVID_ROM_VERSION(version)	((version) & ROM_VERSION_MASK)
+#define GET_CVID_CUT_VERSION(version)	((version) & CUT_VERSION_MASK)
+
+#define IS_92C_SERIAL(version)   ((IS_81XXC(version) && IS_2T2R(version)) ?\
+								true : false)
+#define IS_81XXC(version)	((GET_CVID_IC_TYPE(version) == 0) ?\
+							true : false)
+#define IS_8723_SERIES(version)	((GET_CVID_IC_TYPE(version) == CHIP_8723) ?\
+							true : false)
+#define IS_1T1R(version)	((GET_CVID_RF_TYPE(version)) ? false : true)
+#define IS_1T2R(version)	((GET_CVID_RF_TYPE(version) == RF_TYPE_1T2R)\
+							? true : false)
+#define IS_2T2R(version)	((GET_CVID_RF_TYPE(version) == RF_TYPE_2T2R)\
+							? true : false)
+enum rf_optype {
+	RF_OP_BY_SW_3WIRE = 0,
+	RF_OP_BY_FW,
+	RF_OP_MAX
+};
+
+enum rf_power_state {
+	RF_ON,
+	RF_OFF,
+	RF_SLEEP,
+	RF_SHUT_DOWN,
+};
+
+enum power_save_mode {
+	POWER_SAVE_MODE_ACTIVE,
+	POWER_SAVE_MODE_SAVE,
+};
+
+enum power_polocy_config {
+	POWERCFG_MAX_POWER_SAVINGS,
+	POWERCFG_GLOBAL_POWER_SAVINGS,
+	POWERCFG_LOCAL_POWER_SAVINGS,
+	POWERCFG_LENOVO,
+};
+
+enum interface_select_pci {
+	INTF_SEL1_MINICARD = 0,
+	INTF_SEL0_PCIE = 1,
+	INTF_SEL2_RSV = 2,
+	INTF_SEL3_RSV = 3,
+};
+
+enum rtl_desc_qsel {
+	QSLT_BK = 0x2,
+	QSLT_BE = 0x0,
+	QSLT_VI = 0x5,
+	QSLT_VO = 0x7,
+	QSLT_BEACON = 0x10,
+	QSLT_HIGH = 0x11,
+	QSLT_MGNT = 0x12,
+	QSLT_CMD = 0x13,
+};
+
+enum rtl_desc8723e_rate {
+	DESC92C_RATE1M = 0x00,
+	DESC92C_RATE2M = 0x01,
+	DESC92C_RATE5_5M = 0x02,
+	DESC92C_RATE11M = 0x03,
+
+	DESC92C_RATE6M = 0x04,
+	DESC92C_RATE9M = 0x05,
+	DESC92C_RATE12M = 0x06,
+	DESC92C_RATE18M = 0x07,
+	DESC92C_RATE24M = 0x08,
+	DESC92C_RATE36M = 0x09,
+	DESC92C_RATE48M = 0x0a,
+	DESC92C_RATE54M = 0x0b,
+
+	DESC92C_RATEMCS0 = 0x0c,
+	DESC92C_RATEMCS1 = 0x0d,
+	DESC92C_RATEMCS2 = 0x0e,
+	DESC92C_RATEMCS3 = 0x0f,
+	DESC92C_RATEMCS4 = 0x10,
+	DESC92C_RATEMCS5 = 0x11,
+	DESC92C_RATEMCS6 = 0x12,
+	DESC92C_RATEMCS7 = 0x13,
+	DESC92C_RATEMCS8 = 0x14,
+	DESC92C_RATEMCS9 = 0x15,
+	DESC92C_RATEMCS10 = 0x16,
+	DESC92C_RATEMCS11 = 0x17,
+	DESC92C_RATEMCS12 = 0x18,
+	DESC92C_RATEMCS13 = 0x19,
+	DESC92C_RATEMCS14 = 0x1a,
+	DESC92C_RATEMCS15 = 0x1b,
+	DESC92C_RATEMCS15_SG = 0x1c,
+	DESC92C_RATEMCS32 = 0x20,
+};
+
+enum rx_packet_type {
+	NORMAL_RX,
+	TX_REPORT1,
+	TX_REPORT2,
+	HIS_REPORT,
+};
+
+struct phy_sts_cck_8723e_t {
+	u8 adc_pwdb_X[4];
+	u8 sq_rpt;
+	u8 cck_agc_rpt;
+};
+
+struct h2c_cmd_8723e {
+	u8 element_id;
+	u32 cmd_len;
+	u8 *p_cmdbuffer;
+};
+
+#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/dm.c b/drivers/net/wireless/rtlwifi/rtl8723be/dm.c
new file mode 100644
index 000000000000..736bfcb7938a
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/dm.c
@@ -0,0 +1,1325 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2014  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "../base.h"
+#include "../pci.h"
+#include "reg.h"
+#include "def.h"
+#include "phy.h"
+#include "dm.h"
+#include "../rtl8723com/dm_common.h"
+#include "fw.h"
+#include "../rtl8723com/fw_common.h"
+#include "trx.h"
+#include "../btcoexist/rtl_btc.h"
+
+static const u32 ofdmswing_table[] = {
+	0x0b40002d, /* 0,  -15.0dB */
+	0x0c000030, /* 1,  -14.5dB */
+	0x0cc00033, /* 2,  -14.0dB */
+	0x0d800036, /* 3,  -13.5dB */
+	0x0e400039, /* 4,  -13.0dB */
+	0x0f00003c, /* 5,  -12.5dB */
+	0x10000040, /* 6,  -12.0dB */
+	0x11000044, /* 7,  -11.5dB */
+	0x12000048, /* 8,  -11.0dB */
+	0x1300004c, /* 9,  -10.5dB */
+	0x14400051, /* 10, -10.0dB */
+	0x15800056, /* 11, -9.5dB */
+	0x16c0005b, /* 12, -9.0dB */
+	0x18000060, /* 13, -8.5dB */
+	0x19800066, /* 14, -8.0dB */
+	0x1b00006c, /* 15, -7.5dB */
+	0x1c800072, /* 16, -7.0dB */
+	0x1e400079, /* 17, -6.5dB */
+	0x20000080, /* 18, -6.0dB */
+	0x22000088, /* 19, -5.5dB */
+	0x24000090, /* 20, -5.0dB */
+	0x26000098, /* 21, -4.5dB */
+	0x288000a2, /* 22, -4.0dB */
+	0x2ac000ab, /* 23, -3.5dB */
+	0x2d4000b5, /* 24, -3.0dB */
+	0x300000c0, /* 25, -2.5dB */
+	0x32c000cb, /* 26, -2.0dB */
+	0x35c000d7, /* 27, -1.5dB */
+	0x390000e4, /* 28, -1.0dB */
+	0x3c8000f2, /* 29, -0.5dB */
+	0x40000100, /* 30, +0dB */
+	0x43c0010f, /* 31, +0.5dB */
+	0x47c0011f, /* 32, +1.0dB */
+	0x4c000130, /* 33, +1.5dB */
+	0x50800142, /* 34, +2.0dB */
+	0x55400155, /* 35, +2.5dB */
+	0x5a400169, /* 36, +3.0dB */
+	0x5fc0017f, /* 37, +3.5dB */
+	0x65400195, /* 38, +4.0dB */
+	0x6b8001ae, /* 39, +4.5dB */
+	0x71c001c7, /* 40, +5.0dB */
+	0x788001e2, /* 41, +5.5dB */
+	0x7f8001fe  /* 42, +6.0dB */
+};
+
+static const u8 cckswing_table_ch1ch13[CCK_TABLE_SIZE][8] = {
+	{0x09, 0x08, 0x07, 0x06, 0x04, 0x03, 0x01, 0x01}, /*  0, -16.0dB */
+	{0x09, 0x09, 0x08, 0x06, 0x05, 0x03, 0x01, 0x01}, /*  1, -15.5dB */
+	{0x0a, 0x09, 0x08, 0x07, 0x05, 0x03, 0x02, 0x01}, /*  2, -15.0dB */
+	{0x0a, 0x0a, 0x09, 0x07, 0x05, 0x03, 0x02, 0x01}, /*  3, -14.5dB */
+	{0x0b, 0x0a, 0x09, 0x08, 0x06, 0x04, 0x02, 0x01}, /*  4, -14.0dB */
+	{0x0b, 0x0b, 0x0a, 0x08, 0x06, 0x04, 0x02, 0x01}, /*  5, -13.5dB */
+	{0x0c, 0x0c, 0x0a, 0x09, 0x06, 0x04, 0x02, 0x01}, /*  6, -13.0dB */
+	{0x0d, 0x0c, 0x0b, 0x09, 0x07, 0x04, 0x02, 0x01}, /*  7, -12.5dB */
+	{0x0d, 0x0d, 0x0c, 0x0a, 0x07, 0x05, 0x02, 0x01}, /*  8, -12.0dB */
+	{0x0e, 0x0e, 0x0c, 0x0a, 0x08, 0x05, 0x02, 0x01}, /*  9, -11.5dB */
+	{0x0f, 0x0f, 0x0d, 0x0b, 0x08, 0x05, 0x03, 0x01}, /* 10, -11.0dB */
+	{0x10, 0x10, 0x0e, 0x0b, 0x08, 0x05, 0x03, 0x01}, /* 11, -10.5dB */
+	{0x11, 0x11, 0x0f, 0x0c, 0x09, 0x06, 0x03, 0x01}, /* 12, -10.0dB */
+	{0x12, 0x12, 0x0f, 0x0c, 0x09, 0x06, 0x03, 0x01}, /* 13, -9.5dB */
+	{0x13, 0x13, 0x10, 0x0d, 0x0a, 0x06, 0x03, 0x01}, /* 14, -9.0dB */
+	{0x14, 0x14, 0x11, 0x0e, 0x0b, 0x07, 0x03, 0x02}, /* 15, -8.5dB */
+	{0x16, 0x15, 0x12, 0x0f, 0x0b, 0x07, 0x04, 0x01}, /* 16, -8.0dB */
+	{0x17, 0x16, 0x13, 0x10, 0x0c, 0x08, 0x04, 0x02}, /* 17, -7.5dB */
+	{0x18, 0x17, 0x15, 0x11, 0x0c, 0x08, 0x04, 0x02}, /* 18, -7.0dB */
+	{0x1a, 0x19, 0x16, 0x12, 0x0d, 0x09, 0x04, 0x02}, /* 19, -6.5dB */
+	{0x1b, 0x1a, 0x17, 0x13, 0x0e, 0x09, 0x04, 0x02}, /* 20, -6.0dB */
+	{0x1d, 0x1c, 0x18, 0x14, 0x0f, 0x0a, 0x05, 0x02}, /* 21, -5.5dB */
+	{0x1f, 0x1e, 0x1a, 0x15, 0x10, 0x0a, 0x05, 0x02}, /* 22, -5.0dB */
+	{0x20, 0x20, 0x1b, 0x16, 0x11, 0x08, 0x05, 0x02}, /* 23, -4.5dB */
+	{0x22, 0x21, 0x1d, 0x18, 0x11, 0x0b, 0x06, 0x02}, /* 24, -4.0dB */
+	{0x24, 0x23, 0x1f, 0x19, 0x13, 0x0c, 0x06, 0x03}, /* 25, -3.5dB */
+	{0x26, 0x25, 0x21, 0x1b, 0x14, 0x0d, 0x06, 0x03}, /* 26, -3.0dB */
+	{0x28, 0x28, 0x22, 0x1c, 0x15, 0x0d, 0x07, 0x03}, /* 27, -2.5dB */
+	{0x2b, 0x2a, 0x25, 0x1e, 0x16, 0x0e, 0x07, 0x03}, /* 28, -2.0dB */
+	{0x2d, 0x2d, 0x27, 0x1f, 0x18, 0x0f, 0x08, 0x03}, /* 29, -1.5dB */
+	{0x30, 0x2f, 0x29, 0x21, 0x19, 0x10, 0x08, 0x03}, /* 30, -1.0dB */
+	{0x33, 0x32, 0x2b, 0x23, 0x1a, 0x11, 0x08, 0x04}, /* 31, -0.5dB */
+	{0x36, 0x35, 0x2e, 0x25, 0x1c, 0x12, 0x09, 0x04}  /* 32, +0dB */
+};
+
+static const u8 cckswing_table_ch14[CCK_TABLE_SIZE][8] = {
+	{0x09, 0x08, 0x07, 0x04, 0x00, 0x00, 0x00, 0x00}, /*  0, -16.0dB */
+	{0x09, 0x09, 0x08, 0x05, 0x00, 0x00, 0x00, 0x00}, /*  1, -15.5dB */
+	{0x0a, 0x09, 0x08, 0x05, 0x00, 0x00, 0x00, 0x00}, /*  2, -15.0dB */
+	{0x0a, 0x0a, 0x09, 0x05, 0x00, 0x00, 0x00, 0x00}, /*  3, -14.5dB */
+	{0x0b, 0x0a, 0x09, 0x05, 0x00, 0x00, 0x00, 0x00}, /*  4, -14.0dB */
+	{0x0b, 0x0b, 0x0a, 0x06, 0x00, 0x00, 0x00, 0x00}, /*  5, -13.5dB */
+	{0x0c, 0x0c, 0x0a, 0x06, 0x00, 0x00, 0x00, 0x00}, /*  6, -13.0dB */
+	{0x0d, 0x0c, 0x0b, 0x06, 0x00, 0x00, 0x00, 0x00}, /*  7, -12.5dB */
+	{0x0d, 0x0d, 0x0c, 0x07, 0x00, 0x00, 0x00, 0x00}, /*  8, -12.0dB */
+	{0x0e, 0x0e, 0x0c, 0x07, 0x00, 0x00, 0x00, 0x00}, /*  9, -11.5dB */
+	{0x0f, 0x0f, 0x0d, 0x08, 0x00, 0x00, 0x00, 0x00}, /* 10, -11.0dB */
+	{0x10, 0x10, 0x0e, 0x08, 0x00, 0x00, 0x00, 0x00}, /* 11, -10.5dB */
+	{0x11, 0x11, 0x0f, 0x09, 0x00, 0x00, 0x00, 0x00}, /* 12, -10.0dB */
+	{0x12, 0x12, 0x0f, 0x09, 0x00, 0x00, 0x00, 0x00}, /* 13, -9.5dB */
+	{0x13, 0x13, 0x10, 0x0a, 0x00, 0x00, 0x00, 0x00}, /* 14, -9.0dB */
+	{0x14, 0x14, 0x11, 0x0a, 0x00, 0x00, 0x00, 0x00}, /* 15, -8.5dB */
+	{0x16, 0x15, 0x12, 0x0b, 0x00, 0x00, 0x00, 0x00}, /* 16, -8.0dB */
+	{0x17, 0x16, 0x13, 0x0b, 0x00, 0x00, 0x00, 0x00}, /* 17, -7.5dB */
+	{0x18, 0x17, 0x15, 0x0c, 0x00, 0x00, 0x00, 0x00}, /* 18, -7.0dB */
+	{0x1a, 0x19, 0x16, 0x0d, 0x00, 0x00, 0x00, 0x00}, /* 19, -6.5dB */
+	{0x1b, 0x1a, 0x17, 0x0e, 0x00, 0x00, 0x00, 0x00}, /* 20, -6.0dB */
+	{0x1d, 0x1c, 0x18, 0x0e, 0x00, 0x00, 0x00, 0x00}, /* 21, -5.5dB */
+	{0x1f, 0x1e, 0x1a, 0x0f, 0x00, 0x00, 0x00, 0x00}, /* 22, -5.0dB */
+	{0x20, 0x20, 0x1b, 0x10, 0x00, 0x00, 0x00, 0x00}, /* 23, -4.5dB */
+	{0x22, 0x21, 0x1d, 0x11, 0x00, 0x00, 0x00, 0x00}, /* 24, -4.0dB */
+	{0x24, 0x23, 0x1f, 0x12, 0x00, 0x00, 0x00, 0x00}, /* 25, -3.5dB */
+	{0x26, 0x25, 0x21, 0x13, 0x00, 0x00, 0x00, 0x00}, /* 26, -3.0dB */
+	{0x28, 0x28, 0x24, 0x14, 0x00, 0x00, 0x00, 0x00}, /* 27, -2.5dB */
+	{0x2b, 0x2a, 0x25, 0x15, 0x00, 0x00, 0x00, 0x00}, /* 28, -2.0dB */
+	{0x2d, 0x2d, 0x17, 0x17, 0x00, 0x00, 0x00, 0x00}, /* 29, -1.5dB */
+	{0x30, 0x2f, 0x29, 0x18, 0x00, 0x00, 0x00, 0x00}, /* 30, -1.0dB */
+	{0x33, 0x32, 0x2b, 0x19, 0x00, 0x00, 0x00, 0x00}, /* 31, -0.5dB */
+	{0x36, 0x35, 0x2e, 0x1b, 0x00, 0x00, 0x00, 0x00}  /* 32, +0dB */
+};
+
+static const u32 edca_setting_dl[PEER_MAX] = {
+	0xa44f,		/* 0 UNKNOWN */
+	0x5ea44f,	/* 1 REALTEK_90 */
+	0x5e4322,	/* 2 REALTEK_92SE */
+	0x5ea42b,	/* 3 BROAD */
+	0xa44f,		/* 4 RAL */
+	0xa630,		/* 5 ATH */
+	0x5ea630,	/* 6 CISCO */
+	0x5ea42b,	/* 7 MARVELL */
+};
+
+static const u32 edca_setting_ul[PEER_MAX] = {
+	0x5e4322,	/* 0 UNKNOWN */
+	0xa44f,		/* 1 REALTEK_90 */
+	0x5ea44f,	/* 2 REALTEK_92SE */
+	0x5ea32b,	/* 3 BROAD */
+	0x5ea422,	/* 4 RAL */
+	0x5ea322,	/* 5 ATH */
+	0x3ea430,	/* 6 CISCO */
+	0x5ea44f,	/* 7 MARV */
+};
+
+void rtl8723be_dm_txpower_track_adjust(struct ieee80211_hw *hw, u8 type,
+				       u8 *pdirection, u32 *poutwrite_val)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_dm *rtldm = rtl_dm(rtl_priv(hw));
+	u8 pwr_val = 0;
+	u8 ofdm_base = rtlpriv->dm.swing_idx_ofdm_base[RF90_PATH_A];
+	u8 ofdm_val = rtlpriv->dm.swing_idx_ofdm[RF90_PATH_A];
+	u8 cck_base = rtldm->swing_idx_cck_base;
+	u8 cck_val = rtldm->swing_idx_cck;
+
+	if (type == 0) {
+		if (ofdm_val <= ofdm_base) {
+			*pdirection = 1;
+			pwr_val = ofdm_base - ofdm_val;
+		} else {
+			*pdirection = 2;
+			pwr_val = ofdm_val - ofdm_base;
+		}
+	} else if (type == 1) {
+		if (cck_val <= cck_base) {
+			*pdirection = 1;
+			pwr_val = cck_base - cck_val;
+		} else {
+			*pdirection = 2;
+			pwr_val = cck_val - cck_base;
+		}
+	}
+
+	if (pwr_val >= TXPWRTRACK_MAX_IDX && (*pdirection == 1))
+		pwr_val = TXPWRTRACK_MAX_IDX;
+
+	*poutwrite_val = pwr_val | (pwr_val << 8) |
+			(pwr_val << 16) | (pwr_val << 24);
+}
+
+static void rtl8723be_dm_diginit(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct dig_t *dm_digtable = &rtlpriv->dm_digtable;
+
+	dm_digtable->dig_enable_flag = true;
+	dm_digtable->cur_igvalue = rtl_get_bbreg(hw,
+		ROFDM0_XAAGCCORE1, 0x7f);
+	dm_digtable->rssi_lowthresh = DM_DIG_THRESH_LOW;
+	dm_digtable->rssi_highthresh = DM_DIG_THRESH_HIGH;
+	dm_digtable->fa_lowthresh = DM_FALSEALARM_THRESH_LOW;
+	dm_digtable->fa_highthresh = DM_FALSEALARM_THRESH_HIGH;
+	dm_digtable->rx_gain_max = DM_DIG_MAX;
+	dm_digtable->rx_gain_min = DM_DIG_MIN;
+	dm_digtable->back_val = DM_DIG_BACKOFF_DEFAULT;
+	dm_digtable->back_range_max = DM_DIG_BACKOFF_MAX;
+	dm_digtable->back_range_min = DM_DIG_BACKOFF_MIN;
+	dm_digtable->pre_cck_cca_thres = 0xff;
+	dm_digtable->cur_cck_cca_thres = 0x83;
+	dm_digtable->forbidden_igi = DM_DIG_MIN;
+	dm_digtable->large_fa_hit = 0;
+	dm_digtable->recover_cnt = 0;
+	dm_digtable->dig_min_0 = DM_DIG_MIN;
+	dm_digtable->dig_min_1 = DM_DIG_MIN;
+	dm_digtable->media_connect_0 = false;
+	dm_digtable->media_connect_1 = false;
+	rtlpriv->dm.dm_initialgain_enable = true;
+	dm_digtable->bt30_cur_igi = 0x32;
+}
+
+void rtl8723be_dm_init_rate_adaptive_mask(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rate_adaptive *ra = &(rtlpriv->ra);
+
+	ra->ratr_state = DM_RATR_STA_INIT;
+	ra->pre_ratr_state = DM_RATR_STA_INIT;
+
+	if (rtlpriv->dm.dm_type == DM_TYPE_BYDRIVER)
+		rtlpriv->dm.useramask = true;
+	else
+		rtlpriv->dm.useramask = false;
+
+	ra->high_rssi_thresh_for_ra = 50;
+	ra->low_rssi_thresh_for_ra40m = 20;
+}
+
+static void rtl8723be_dm_init_txpower_tracking(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	rtlpriv->dm.txpower_tracking = true;
+	rtlpriv->dm.txpower_track_control = true;
+	rtlpriv->dm.thermalvalue = 0;
+
+	rtlpriv->dm.ofdm_index[0] = 30;
+	rtlpriv->dm.cck_index = 20;
+
+	rtlpriv->dm.swing_idx_cck_base = rtlpriv->dm.cck_index;
+
+	rtlpriv->dm.swing_idx_ofdm_base[0] = rtlpriv->dm.ofdm_index[0];
+	rtlpriv->dm.delta_power_index[RF90_PATH_A] = 0;
+	rtlpriv->dm.delta_power_index_last[RF90_PATH_A] = 0;
+	rtlpriv->dm.power_index_offset[RF90_PATH_A] = 0;
+
+	RT_TRACE(rtlpriv, COMP_POWER_TRACKING, DBG_LOUD,
+		 "  rtlpriv->dm.txpower_tracking = %d\n",
+		 rtlpriv->dm.txpower_tracking);
+}
+
+static void rtl8723be_dm_init_dynamic_atc_switch(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	rtlpriv->dm.crystal_cap = rtlpriv->efuse.crystalcap;
+	rtlpriv->dm.atc_status = rtl_get_bbreg(hw, ROFDM1_CFOTRACKING, 0x800);
+	rtlpriv->dm.cfo_threshold = CFO_THRESHOLD_XTAL;
+}
+
+void rtl8723be_dm_init(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	rtlpriv->dm.dm_type = DM_TYPE_BYDRIVER;
+	rtl8723be_dm_diginit(hw);
+	rtl8723be_dm_init_rate_adaptive_mask(hw);
+	rtl8723_dm_init_edca_turbo(hw);
+	rtl8723_dm_init_dynamic_bb_powersaving(hw);
+	rtl8723_dm_init_dynamic_txpower(hw);
+	rtl8723be_dm_init_txpower_tracking(hw);
+	rtl8723be_dm_init_dynamic_atc_switch(hw);
+}
+
+static void rtl8723be_dm_find_minimum_rssi(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct dig_t *rtl_dm_dig = &(rtlpriv->dm_digtable);
+	struct rtl_mac *mac = rtl_mac(rtlpriv);
+
+	/* Determine the minimum RSSI  */
+	if ((mac->link_state < MAC80211_LINKED) &&
+	    (rtlpriv->dm.entry_min_undec_sm_pwdb == 0)) {
+		rtl_dm_dig->min_undec_pwdb_for_dm = 0;
+		RT_TRACE(rtlpriv, COMP_BB_POWERSAVING, DBG_LOUD,
+			 "Not connected to any\n");
+	}
+	if (mac->link_state >= MAC80211_LINKED) {
+		if (mac->opmode == NL80211_IFTYPE_AP ||
+		    mac->opmode == NL80211_IFTYPE_ADHOC) {
+			rtl_dm_dig->min_undec_pwdb_for_dm =
+			    rtlpriv->dm.entry_min_undec_sm_pwdb;
+			RT_TRACE(rtlpriv, COMP_BB_POWERSAVING, DBG_LOUD,
+				 "AP Client PWDB = 0x%lx\n",
+				 rtlpriv->dm.entry_min_undec_sm_pwdb);
+		} else {
+			rtl_dm_dig->min_undec_pwdb_for_dm =
+			    rtlpriv->dm.undec_sm_pwdb;
+			RT_TRACE(rtlpriv, COMP_BB_POWERSAVING, DBG_LOUD,
+				 "STA Default Port PWDB = 0x%x\n",
+				 rtl_dm_dig->min_undec_pwdb_for_dm);
+		}
+	} else {
+		rtl_dm_dig->min_undec_pwdb_for_dm =
+				rtlpriv->dm.entry_min_undec_sm_pwdb;
+		RT_TRACE(rtlpriv, COMP_BB_POWERSAVING, DBG_LOUD,
+			 "AP Ext Port or disconnet PWDB = 0x%x\n",
+			 rtl_dm_dig->min_undec_pwdb_for_dm);
+	}
+	RT_TRACE(rtlpriv, COMP_DIG, DBG_LOUD, "MinUndecoratedPWDBForDM =%d\n",
+		 rtl_dm_dig->min_undec_pwdb_for_dm);
+}
+
+static void rtl8723be_dm_check_rssi_monitor(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_sta_info *drv_priv;
+	u8 h2c_parameter[3] = { 0 };
+	long tmp_entry_max_pwdb = 0, tmp_entry_min_pwdb = 0xff;
+
+	/* AP & ADHOC & MESH */
+	spin_lock_bh(&rtlpriv->locks.entry_list_lock);
+	list_for_each_entry(drv_priv, &rtlpriv->entry_list, list) {
+		if (drv_priv->rssi_stat.undec_sm_pwdb <
+						tmp_entry_min_pwdb)
+			tmp_entry_min_pwdb =
+				drv_priv->rssi_stat.undec_sm_pwdb;
+		if (drv_priv->rssi_stat.undec_sm_pwdb >
+						tmp_entry_max_pwdb)
+			tmp_entry_max_pwdb =
+				drv_priv->rssi_stat.undec_sm_pwdb;
+	}
+	spin_unlock_bh(&rtlpriv->locks.entry_list_lock);
+
+	/* If associated entry is found */
+	if (tmp_entry_max_pwdb != 0) {
+		rtlpriv->dm.entry_max_undec_sm_pwdb = tmp_entry_max_pwdb;
+		RT_TRACE(rtlpriv, COMP_POWER_TRACKING, DBG_LOUD,
+			 "EntryMaxPWDB = 0x%lx(%ld)\n",
+			 tmp_entry_max_pwdb, tmp_entry_max_pwdb);
+	} else {
+		rtlpriv->dm.entry_max_undec_sm_pwdb = 0;
+	}
+	/* If associated entry is found */
+	if (tmp_entry_min_pwdb != 0xff) {
+		rtlpriv->dm.entry_min_undec_sm_pwdb = tmp_entry_min_pwdb;
+		RT_TRACE(rtlpriv, COMP_POWER_TRACKING, DBG_LOUD,
+			 "EntryMinPWDB = 0x%lx(%ld)\n",
+			 tmp_entry_min_pwdb, tmp_entry_min_pwdb);
+	} else {
+		rtlpriv->dm.entry_min_undec_sm_pwdb = 0;
+	}
+	/* Indicate Rx signal strength to FW. */
+	if (rtlpriv->dm.useramask) {
+		h2c_parameter[2] = (u8) (rtlpriv->dm.undec_sm_pwdb & 0xFF);
+		h2c_parameter[1] = 0x20;
+		h2c_parameter[0] = 0;
+		rtl8723be_fill_h2c_cmd(hw, H2C_RSSI_REPORT, 3, h2c_parameter);
+	} else {
+		rtl_write_byte(rtlpriv, 0x4fe, rtlpriv->dm.undec_sm_pwdb);
+	}
+	rtl8723be_dm_find_minimum_rssi(hw);
+	rtlpriv->dm_digtable.rssi_val_min =
+		rtlpriv->dm_digtable.min_undec_pwdb_for_dm;
+}
+
+void rtl8723be_dm_write_dig(struct ieee80211_hw *hw, u8 current_igi)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	if (rtlpriv->dm_digtable.cur_igvalue != current_igi) {
+		rtl_set_bbreg(hw, ROFDM0_XAAGCCORE1, 0x7f, current_igi);
+		if (rtlpriv->phy.rf_type != RF_1T1R)
+			rtl_set_bbreg(hw, ROFDM0_XBAGCCORE1, 0x7f, current_igi);
+	}
+	rtlpriv->dm_digtable.pre_igvalue = rtlpriv->dm_digtable.cur_igvalue;
+	rtlpriv->dm_digtable.cur_igvalue = current_igi;
+}
+
+static void rtl8723be_dm_dig(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct dig_t *dm_digtable = &(rtlpriv->dm_digtable);
+	u8 dig_dynamic_min, dig_maxofmin;
+	bool firstconnect, firstdisconnect;
+	u8 dm_dig_max, dm_dig_min;
+	u8 current_igi = dm_digtable->cur_igvalue;
+	u8 offset;
+
+	/* AP, BT */
+	if (mac->act_scanning)
+		return;
+
+	dig_dynamic_min = dm_digtable->dig_min_0;
+	firstconnect = (mac->link_state >= MAC80211_LINKED) &&
+			!dm_digtable->media_connect_0;
+	firstdisconnect = (mac->link_state < MAC80211_LINKED) &&
+			   dm_digtable->media_connect_0;
+
+	dm_dig_max = 0x5a;
+	dm_dig_min = DM_DIG_MIN;
+	dig_maxofmin = DM_DIG_MAX_AP;
+
+	if (mac->link_state >= MAC80211_LINKED) {
+		if ((dm_digtable->rssi_val_min + 10) > dm_dig_max)
+			dm_digtable->rx_gain_max = dm_dig_max;
+		else if ((dm_digtable->rssi_val_min + 10) < dm_dig_min)
+			dm_digtable->rx_gain_max = dm_dig_min;
+		else
+			dm_digtable->rx_gain_max =
+				dm_digtable->rssi_val_min + 10;
+
+		if (rtlpriv->dm.one_entry_only) {
+			offset = 12;
+			if (dm_digtable->rssi_val_min - offset < dm_dig_min)
+				dig_dynamic_min = dm_dig_min;
+			else if (dm_digtable->rssi_val_min - offset >
+							dig_maxofmin)
+				dig_dynamic_min = dig_maxofmin;
+			else
+				dig_dynamic_min =
+					dm_digtable->rssi_val_min - offset;
+		} else {
+			dig_dynamic_min = dm_dig_min;
+		}
+	} else {
+		dm_digtable->rx_gain_max = dm_dig_max;
+		dig_dynamic_min = dm_dig_min;
+		RT_TRACE(rtlpriv, COMP_DIG, DBG_LOUD, "no link\n");
+	}
+
+	if (rtlpriv->falsealm_cnt.cnt_all > 10000) {
+		if (dm_digtable->large_fa_hit != 3)
+			dm_digtable->large_fa_hit++;
+		if (dm_digtable->forbidden_igi < current_igi) {
+			dm_digtable->forbidden_igi = current_igi;
+			dm_digtable->large_fa_hit = 1;
+		}
+
+		if (dm_digtable->large_fa_hit >= 3) {
+			if ((dm_digtable->forbidden_igi + 1) >
+			     dm_digtable->rx_gain_max)
+				dm_digtable->rx_gain_min =
+						dm_digtable->rx_gain_max;
+			else
+				dm_digtable->rx_gain_min =
+						dm_digtable->forbidden_igi + 1;
+			dm_digtable->recover_cnt = 3600;
+		}
+	} else {
+		if (dm_digtable->recover_cnt != 0) {
+			dm_digtable->recover_cnt--;
+		} else {
+			if (dm_digtable->large_fa_hit < 3) {
+				if ((dm_digtable->forbidden_igi - 1) <
+				     dig_dynamic_min) {
+					dm_digtable->forbidden_igi =
+							dig_dynamic_min;
+					dm_digtable->rx_gain_min =
+							dig_dynamic_min;
+				} else {
+					dm_digtable->forbidden_igi--;
+					dm_digtable->rx_gain_min =
+						dm_digtable->forbidden_igi + 1;
+				}
+			} else {
+				dm_digtable->large_fa_hit = 0;
+			}
+		}
+	}
+	if (dm_digtable->rx_gain_min > dm_digtable->rx_gain_max)
+		dm_digtable->rx_gain_min = dm_digtable->rx_gain_max;
+
+	if (mac->link_state >= MAC80211_LINKED) {
+		if (firstconnect) {
+			if (dm_digtable->rssi_val_min <= dig_maxofmin)
+				current_igi = dm_digtable->rssi_val_min;
+			else
+				current_igi = dig_maxofmin;
+
+			dm_digtable->large_fa_hit = 0;
+		} else {
+			if (rtlpriv->falsealm_cnt.cnt_all > DM_DIG_FA_TH2)
+				current_igi += 4;
+			else if (rtlpriv->falsealm_cnt.cnt_all > DM_DIG_FA_TH1)
+				current_igi += 2;
+			else if (rtlpriv->falsealm_cnt.cnt_all < DM_DIG_FA_TH0)
+				current_igi -= 2;
+		}
+	} else {
+		if (firstdisconnect) {
+			current_igi = dm_digtable->rx_gain_min;
+		} else {
+			if (rtlpriv->falsealm_cnt.cnt_all > 10000)
+				current_igi += 4;
+			else if (rtlpriv->falsealm_cnt.cnt_all > 8000)
+				current_igi += 2;
+			else if (rtlpriv->falsealm_cnt.cnt_all < 500)
+				current_igi -= 2;
+		}
+	}
+
+	if (current_igi > dm_digtable->rx_gain_max)
+		current_igi = dm_digtable->rx_gain_max;
+	else if (current_igi < dm_digtable->rx_gain_min)
+		current_igi = dm_digtable->rx_gain_min;
+
+	rtl8723be_dm_write_dig(hw, current_igi);
+	dm_digtable->media_connect_0 =
+		((mac->link_state >= MAC80211_LINKED) ? true : false);
+	dm_digtable->dig_min_0 = dig_dynamic_min;
+}
+
+static void rtl8723be_dm_false_alarm_counter_statistics(struct ieee80211_hw *hw)
+{
+	u32 ret_value;
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct false_alarm_statistics *falsealm_cnt = &(rtlpriv->falsealm_cnt);
+
+	rtl_set_bbreg(hw, DM_REG_OFDM_FA_HOLDC_11N, BIT(31), 1);
+	rtl_set_bbreg(hw, DM_REG_OFDM_FA_RSTD_11N, BIT(31), 1);
+
+	ret_value = rtl_get_bbreg(hw, DM_REG_OFDM_FA_TYPE1_11N, MASKDWORD);
+	falsealm_cnt->cnt_fast_fsync_fail = ret_value & 0xffff;
+	falsealm_cnt->cnt_sb_search_fail = (ret_value & 0xffff0000) >> 16;
+
+	ret_value = rtl_get_bbreg(hw, DM_REG_OFDM_FA_TYPE2_11N, MASKDWORD);
+	falsealm_cnt->cnt_ofdm_cca = ret_value & 0xffff;
+	falsealm_cnt->cnt_parity_fail = (ret_value & 0xffff0000) >> 16;
+
+	ret_value = rtl_get_bbreg(hw, DM_REG_OFDM_FA_TYPE3_11N, MASKDWORD);
+	falsealm_cnt->cnt_rate_illegal = ret_value & 0xffff;
+	falsealm_cnt->cnt_crc8_fail = (ret_value & 0xffff0000) >> 16;
+
+	ret_value = rtl_get_bbreg(hw, DM_REG_OFDM_FA_TYPE4_11N, MASKDWORD);
+	falsealm_cnt->cnt_mcs_fail = ret_value & 0xffff;
+
+	falsealm_cnt->cnt_ofdm_fail = falsealm_cnt->cnt_parity_fail +
+				      falsealm_cnt->cnt_rate_illegal +
+				      falsealm_cnt->cnt_crc8_fail +
+				      falsealm_cnt->cnt_mcs_fail +
+				      falsealm_cnt->cnt_fast_fsync_fail +
+				      falsealm_cnt->cnt_sb_search_fail;
+
+	rtl_set_bbreg(hw, DM_REG_CCK_FA_RST_11N, BIT(12), 1);
+	rtl_set_bbreg(hw, DM_REG_CCK_FA_RST_11N, BIT(14), 1);
+
+	ret_value = rtl_get_bbreg(hw, DM_REG_CCK_FA_RST_11N, MASKBYTE0);
+	falsealm_cnt->cnt_cck_fail = ret_value;
+
+	ret_value = rtl_get_bbreg(hw, DM_REG_CCK_FA_MSB_11N, MASKBYTE3);
+	falsealm_cnt->cnt_cck_fail += (ret_value & 0xff) << 8;
+
+	ret_value = rtl_get_bbreg(hw, DM_REG_CCK_CCA_CNT_11N, MASKDWORD);
+	falsealm_cnt->cnt_cck_cca = ((ret_value & 0xff) << 8) |
+				    ((ret_value & 0xff00) >> 8);
+
+	falsealm_cnt->cnt_all = falsealm_cnt->cnt_fast_fsync_fail +
+				falsealm_cnt->cnt_sb_search_fail +
+				falsealm_cnt->cnt_parity_fail +
+				falsealm_cnt->cnt_rate_illegal +
+				falsealm_cnt->cnt_crc8_fail +
+				falsealm_cnt->cnt_mcs_fail +
+				falsealm_cnt->cnt_cck_fail;
+
+	falsealm_cnt->cnt_cca_all = falsealm_cnt->cnt_ofdm_cca +
+				    falsealm_cnt->cnt_cck_cca;
+
+	rtl_set_bbreg(hw, DM_REG_OFDM_FA_RSTC_11N, BIT(31), 1);
+	rtl_set_bbreg(hw, DM_REG_OFDM_FA_RSTC_11N, BIT(31), 0);
+	rtl_set_bbreg(hw, DM_REG_OFDM_FA_RSTD_11N, BIT(27), 1);
+	rtl_set_bbreg(hw, DM_REG_OFDM_FA_RSTD_11N, BIT(27), 0);
+
+	rtl_set_bbreg(hw, DM_REG_OFDM_FA_HOLDC_11N, BIT(31), 0);
+	rtl_set_bbreg(hw, DM_REG_OFDM_FA_RSTD_11N, BIT(31), 0);
+
+	rtl_set_bbreg(hw, DM_REG_CCK_FA_RST_11N, BIT(13) | BIT(12), 0);
+	rtl_set_bbreg(hw, DM_REG_CCK_FA_RST_11N, BIT(13) | BIT(12), 2);
+
+	rtl_set_bbreg(hw, DM_REG_CCK_FA_RST_11N, BIT(15) | BIT(14), 0);
+	rtl_set_bbreg(hw, DM_REG_CCK_FA_RST_11N, BIT(15) | BIT(14), 2);
+
+	RT_TRACE(rtlpriv, COMP_DIG, DBG_TRACE,
+		 "cnt_parity_fail = %d, cnt_rate_illegal = %d, "
+		 "cnt_crc8_fail = %d, cnt_mcs_fail = %d\n",
+		 falsealm_cnt->cnt_parity_fail,
+		 falsealm_cnt->cnt_rate_illegal,
+		 falsealm_cnt->cnt_crc8_fail,
+		 falsealm_cnt->cnt_mcs_fail);
+
+	RT_TRACE(rtlpriv, COMP_DIG, DBG_TRACE,
+		 "cnt_ofdm_fail = %x, cnt_cck_fail = %x,"
+		 " cnt_all = %x\n",
+		 falsealm_cnt->cnt_ofdm_fail,
+		 falsealm_cnt->cnt_cck_fail,
+		 falsealm_cnt->cnt_all);
+}
+
+static void rtl8723be_dm_dynamic_txpower(struct ieee80211_hw *hw)
+{
+	/* 8723BE does not support ODM_BB_DYNAMIC_TXPWR*/
+	return;
+}
+
+static void rtl8723be_set_iqk_matrix(struct ieee80211_hw *hw, u8 ofdm_index,
+				     u8 rfpath, long iqk_result_x,
+				     long iqk_result_y)
+{
+	long ele_a = 0, ele_d, ele_c = 0, value32;
+
+	if (ofdm_index >= 43)
+		ofdm_index = 43 - 1;
+
+	ele_d = (ofdmswing_table[ofdm_index] & 0xFFC00000) >> 22;
+
+	if (iqk_result_x != 0) {
+		if ((iqk_result_x & 0x00000200) != 0)
+			iqk_result_x = iqk_result_x | 0xFFFFFC00;
+		ele_a = ((iqk_result_x * ele_d) >> 8) & 0x000003FF;
+
+		if ((iqk_result_y & 0x00000200) != 0)
+			iqk_result_y = iqk_result_y | 0xFFFFFC00;
+		ele_c = ((iqk_result_y * ele_d) >> 8) & 0x000003FF;
+
+		switch (rfpath) {
+		case RF90_PATH_A:
+			value32 = (ele_d << 22) |
+				((ele_c & 0x3F) << 16) | ele_a;
+			rtl_set_bbreg(hw, ROFDM0_XATXIQIMBALANCE, MASKDWORD,
+				      value32);
+			value32 = (ele_c & 0x000003C0) >> 6;
+			rtl_set_bbreg(hw, ROFDM0_XCTXAFE, MASKH4BITS, value32);
+			value32 = ((iqk_result_x * ele_d) >> 7) & 0x01;
+			rtl_set_bbreg(hw, ROFDM0_ECCATHRESHOLD, BIT(24),
+				      value32);
+			break;
+		default:
+			break;
+		}
+	} else {
+		switch (rfpath) {
+		case RF90_PATH_A:
+			rtl_set_bbreg(hw, ROFDM0_XATXIQIMBALANCE, MASKDWORD,
+				      ofdmswing_table[ofdm_index]);
+			rtl_set_bbreg(hw, ROFDM0_XCTXAFE, MASKH4BITS, 0x00);
+			rtl_set_bbreg(hw, ROFDM0_ECCATHRESHOLD, BIT(24), 0x00);
+			break;
+		default:
+			break;
+		}
+	}
+}
+
+static void rtl8723be_dm_tx_power_track_set_power(struct ieee80211_hw *hw,
+					enum pwr_track_control_method method,
+					u8 rfpath, u8 idx)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_dm *rtldm = rtl_dm(rtl_priv(hw));
+	u8 swing_idx_ofdm_limit = 36;
+
+	if (method == TXAGC) {
+		rtl8723be_phy_set_txpower_level(hw, rtlphy->current_channel);
+	} else if (method == BBSWING) {
+		if (rtldm->swing_idx_cck >= CCK_TABLE_SIZE)
+			rtldm->swing_idx_cck = CCK_TABLE_SIZE - 1;
+
+		if (!rtldm->cck_inch14) {
+			rtl_write_byte(rtlpriv, 0xa22,
+			    cckswing_table_ch1ch13[rtldm->swing_idx_cck][0]);
+			rtl_write_byte(rtlpriv, 0xa23,
+			    cckswing_table_ch1ch13[rtldm->swing_idx_cck][1]);
+			rtl_write_byte(rtlpriv, 0xa24,
+			    cckswing_table_ch1ch13[rtldm->swing_idx_cck][2]);
+			rtl_write_byte(rtlpriv, 0xa25,
+			    cckswing_table_ch1ch13[rtldm->swing_idx_cck][3]);
+			rtl_write_byte(rtlpriv, 0xa26,
+			    cckswing_table_ch1ch13[rtldm->swing_idx_cck][4]);
+			rtl_write_byte(rtlpriv, 0xa27,
+			    cckswing_table_ch1ch13[rtldm->swing_idx_cck][5]);
+			rtl_write_byte(rtlpriv, 0xa28,
+			    cckswing_table_ch1ch13[rtldm->swing_idx_cck][6]);
+			rtl_write_byte(rtlpriv, 0xa29,
+			    cckswing_table_ch1ch13[rtldm->swing_idx_cck][7]);
+		} else {
+			rtl_write_byte(rtlpriv, 0xa22,
+			    cckswing_table_ch14[rtldm->swing_idx_cck][0]);
+			rtl_write_byte(rtlpriv, 0xa23,
+			    cckswing_table_ch14[rtldm->swing_idx_cck][1]);
+			rtl_write_byte(rtlpriv, 0xa24,
+			    cckswing_table_ch14[rtldm->swing_idx_cck][2]);
+			rtl_write_byte(rtlpriv, 0xa25,
+			    cckswing_table_ch14[rtldm->swing_idx_cck][3]);
+			rtl_write_byte(rtlpriv, 0xa26,
+			    cckswing_table_ch14[rtldm->swing_idx_cck][4]);
+			rtl_write_byte(rtlpriv, 0xa27,
+			    cckswing_table_ch14[rtldm->swing_idx_cck][5]);
+			rtl_write_byte(rtlpriv, 0xa28,
+			    cckswing_table_ch14[rtldm->swing_idx_cck][6]);
+			rtl_write_byte(rtlpriv, 0xa29,
+			    cckswing_table_ch14[rtldm->swing_idx_cck][7]);
+		}
+
+		if (rfpath == RF90_PATH_A) {
+			if (rtldm->swing_idx_ofdm[RF90_PATH_A] <
+			    swing_idx_ofdm_limit)
+				swing_idx_ofdm_limit =
+					rtldm->swing_idx_ofdm[RF90_PATH_A];
+
+			rtl8723be_set_iqk_matrix(hw,
+				rtldm->swing_idx_ofdm[rfpath], rfpath,
+				rtlphy->iqk_matrix[idx].value[0][0],
+				rtlphy->iqk_matrix[idx].value[0][1]);
+		} else if (rfpath == RF90_PATH_B) {
+			if (rtldm->swing_idx_ofdm[RF90_PATH_B] <
+			    swing_idx_ofdm_limit)
+				swing_idx_ofdm_limit =
+					rtldm->swing_idx_ofdm[RF90_PATH_B];
+
+			rtl8723be_set_iqk_matrix(hw,
+				rtldm->swing_idx_ofdm[rfpath], rfpath,
+				rtlphy->iqk_matrix[idx].value[0][4],
+				rtlphy->iqk_matrix[idx].value[0][5]);
+		}
+	} else {
+		return;
+	}
+}
+
+static void txpwr_track_cb_therm(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	struct rtl_dm	*rtldm = rtl_dm(rtl_priv(hw));
+	u8 thermalvalue = 0, delta, delta_lck, delta_iqk;
+	u8 thermalvalue_avg_count = 0;
+	u32 thermalvalue_avg = 0;
+	int i = 0;
+
+	u8 ofdm_min_index = 6;
+	u8 index = 0;
+
+	char delta_swing_table_idx_tup_a[] = {
+		0, 0, 1, 2, 2, 2, 3, 3, 3, 4,  5,
+		5, 6, 6, 7, 7, 8, 8, 9, 9, 9, 10,
+		10, 11, 11, 12, 12, 13, 14, 15};
+	char delta_swing_table_idx_tdown_a[] = {
+		0, 0, 1, 2, 2, 2, 3, 3, 3, 4,  5,
+		5, 6, 6, 6, 6, 7, 7, 7, 8, 8,  9,
+		9, 10, 10, 11, 12, 13, 14, 15};
+
+	/*Initilization ( 7 steps in total)*/
+	rtlpriv->dm.txpower_trackinginit = true;
+	RT_TRACE(rtlpriv, COMP_POWER_TRACKING, DBG_LOUD,
+		 "rtl8723be_dm_txpower_tracking"
+		 "_callback_thermalmeter\n");
+
+	thermalvalue = (u8)rtl_get_rfreg(hw, RF90_PATH_A, RF_T_METER, 0xfc00);
+	if (!rtlpriv->dm.txpower_track_control || thermalvalue == 0 ||
+	    rtlefuse->eeprom_thermalmeter == 0xFF)
+		return;
+	RT_TRACE(rtlpriv, COMP_POWER_TRACKING, DBG_LOUD,
+		 "Readback Thermal Meter = 0x%x pre thermal meter 0x%x "
+		 "eeprom_thermalmeter 0x%x\n",
+		 thermalvalue, rtldm->thermalvalue,
+		 rtlefuse->eeprom_thermalmeter);
+	/*3 Initialize ThermalValues of RFCalibrateInfo*/
+	if (!rtldm->thermalvalue) {
+		rtlpriv->dm.thermalvalue_lck = thermalvalue;
+		rtlpriv->dm.thermalvalue_iqk = thermalvalue;
+	}
+
+	/*4 Calculate average thermal meter*/
+	rtldm->thermalvalue_avg[rtldm->thermalvalue_avg_index] = thermalvalue;
+	rtldm->thermalvalue_avg_index++;
+	if (rtldm->thermalvalue_avg_index == AVG_THERMAL_NUM_8723BE)
+		rtldm->thermalvalue_avg_index = 0;
+
+	for (i = 0; i < AVG_THERMAL_NUM_8723BE; i++) {
+		if (rtldm->thermalvalue_avg[i]) {
+			thermalvalue_avg += rtldm->thermalvalue_avg[i];
+			thermalvalue_avg_count++;
+		}
+	}
+
+	if (thermalvalue_avg_count)
+		thermalvalue = (u8)(thermalvalue_avg / thermalvalue_avg_count);
+
+	/* 5 Calculate delta, delta_LCK, delta_IQK.*/
+	delta = (thermalvalue > rtlpriv->dm.thermalvalue) ?
+		(thermalvalue - rtlpriv->dm.thermalvalue) :
+		(rtlpriv->dm.thermalvalue - thermalvalue);
+	delta_lck = (thermalvalue > rtlpriv->dm.thermalvalue_lck) ?
+		    (thermalvalue - rtlpriv->dm.thermalvalue_lck) :
+		    (rtlpriv->dm.thermalvalue_lck - thermalvalue);
+	delta_iqk = (thermalvalue > rtlpriv->dm.thermalvalue_iqk) ?
+		    (thermalvalue - rtlpriv->dm.thermalvalue_iqk) :
+		    (rtlpriv->dm.thermalvalue_iqk - thermalvalue);
+
+	RT_TRACE(rtlpriv, COMP_POWER_TRACKING, DBG_LOUD,
+		 "Readback Thermal Meter = 0x%x pre thermal meter 0x%x "
+		 "eeprom_thermalmeter 0x%x delta 0x%x "
+		 "delta_lck 0x%x delta_iqk 0x%x\n",
+		 thermalvalue, rtlpriv->dm.thermalvalue,
+		 rtlefuse->eeprom_thermalmeter, delta, delta_lck, delta_iqk);
+	/* 6 If necessary, do LCK.*/
+	if (delta_lck >= IQK_THRESHOLD) {
+		rtlpriv->dm.thermalvalue_lck = thermalvalue;
+		rtl8723be_phy_lc_calibrate(hw);
+	}
+
+	/* 7 If necessary, move the index of
+	 * swing table to adjust Tx power.
+	 */
+	if (delta > 0 && rtlpriv->dm.txpower_track_control) {
+		delta = (thermalvalue > rtlefuse->eeprom_thermalmeter) ?
+			(thermalvalue - rtlefuse->eeprom_thermalmeter) :
+			(rtlefuse->eeprom_thermalmeter - thermalvalue);
+
+		if (delta >= TXSCALE_TABLE_SIZE)
+			delta = TXSCALE_TABLE_SIZE - 1;
+		/* 7.1 Get the final CCK_index and
+		 * OFDM_index for each swing table.
+		 */
+		if (thermalvalue > rtlefuse->eeprom_thermalmeter) {
+			rtldm->delta_power_index_last[RF90_PATH_A] =
+					rtldm->delta_power_index[RF90_PATH_A];
+			rtldm->delta_power_index[RF90_PATH_A] =
+					delta_swing_table_idx_tup_a[delta];
+		} else {
+			rtldm->delta_power_index_last[RF90_PATH_A] =
+					rtldm->delta_power_index[RF90_PATH_A];
+			rtldm->delta_power_index[RF90_PATH_A] =
+				-1 * delta_swing_table_idx_tdown_a[delta];
+		}
+
+		/* 7.2 Handle boundary conditions of index.*/
+		if (rtldm->delta_power_index[RF90_PATH_A] ==
+		    rtldm->delta_power_index_last[RF90_PATH_A])
+			rtldm->power_index_offset[RF90_PATH_A] = 0;
+		else
+			rtldm->power_index_offset[RF90_PATH_A] =
+				rtldm->delta_power_index[RF90_PATH_A] -
+				rtldm->delta_power_index_last[RF90_PATH_A];
+
+		rtldm->ofdm_index[0] =
+			rtldm->swing_idx_ofdm_base[RF90_PATH_A] +
+			rtldm->power_index_offset[RF90_PATH_A];
+		rtldm->cck_index = rtldm->swing_idx_cck_base +
+				   rtldm->power_index_offset[RF90_PATH_A];
+
+		rtldm->swing_idx_cck = rtldm->cck_index;
+		rtldm->swing_idx_ofdm[0] = rtldm->ofdm_index[0];
+
+		if (rtldm->ofdm_index[0] > OFDM_TABLE_SIZE - 1)
+			rtldm->ofdm_index[0] = OFDM_TABLE_SIZE - 1;
+		else if (rtldm->ofdm_index[0] < ofdm_min_index)
+			rtldm->ofdm_index[0] = ofdm_min_index;
+
+		if (rtldm->cck_index > CCK_TABLE_SIZE - 1)
+			rtldm->cck_index = CCK_TABLE_SIZE - 1;
+		else if (rtldm->cck_index < 0)
+			rtldm->cck_index = 0;
+	} else {
+		rtldm->power_index_offset[RF90_PATH_A] = 0;
+	}
+
+	if ((rtldm->power_index_offset[RF90_PATH_A] != 0) &&
+	    (rtldm->txpower_track_control)) {
+		rtldm->done_txpower = true;
+		if (thermalvalue > rtlefuse->eeprom_thermalmeter)
+			rtl8723be_dm_tx_power_track_set_power(hw, BBSWING, 0,
+							      index);
+		else
+			rtl8723be_dm_tx_power_track_set_power(hw, BBSWING, 0,
+							      index);
+
+		rtldm->swing_idx_cck_base = rtldm->swing_idx_cck;
+		rtldm->swing_idx_ofdm_base[RF90_PATH_A] =
+						rtldm->swing_idx_ofdm[0];
+		rtldm->thermalvalue = thermalvalue;
+	}
+
+	if (delta_iqk >= IQK_THRESHOLD) {
+		rtldm->thermalvalue_iqk = thermalvalue;
+		rtl8723be_phy_iq_calibrate(hw, false);
+	}
+
+	rtldm->txpowercount = 0;
+	RT_TRACE(rtlpriv, COMP_POWER_TRACKING, DBG_LOUD, "end\n");
+}
+
+void rtl8723be_dm_check_txpower_tracking(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	static u8 tm_trigger;
+
+	if (!rtlpriv->dm.txpower_tracking)
+		return;
+
+	if (!tm_trigger) {
+		rtl_set_rfreg(hw, RF90_PATH_A, RF_T_METER, BIT(17) | BIT(16),
+			      0x03);
+		RT_TRACE(rtlpriv, COMP_POWER_TRACKING, DBG_LOUD,
+			 "Trigger 8723be Thermal Meter!!\n");
+		tm_trigger = 1;
+		return;
+	} else {
+		RT_TRACE(rtlpriv, COMP_POWER_TRACKING, DBG_LOUD,
+			 "Schedule TxPowerTracking !!\n");
+		txpwr_track_cb_therm(hw);
+		tm_trigger = 0;
+	}
+}
+
+static void rtl8723be_dm_refresh_rate_adaptive_mask(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rate_adaptive *ra = &(rtlpriv->ra);
+	struct ieee80211_sta *sta = NULL;
+	u32 low_rssithresh_for_ra = ra->low2high_rssi_thresh_for_ra40m;
+	u32 high_rssithresh_for_ra = ra->high_rssi_thresh_for_ra;
+	u8 go_up_gap = 5;
+
+	if (is_hal_stop(rtlhal)) {
+		RT_TRACE(rtlpriv, COMP_RATE, DBG_LOUD,
+			 "driver is going to unload\n");
+		return;
+	}
+
+	if (!rtlpriv->dm.useramask) {
+		RT_TRACE(rtlpriv, COMP_RATE, DBG_LOUD,
+			 "driver does not control rate adaptive mask\n");
+		return;
+	}
+
+	if (mac->link_state == MAC80211_LINKED &&
+	    mac->opmode == NL80211_IFTYPE_STATION) {
+		switch (ra->pre_ratr_state) {
+		case DM_RATR_STA_MIDDLE:
+			high_rssithresh_for_ra += go_up_gap;
+			break;
+		case DM_RATR_STA_LOW:
+			high_rssithresh_for_ra += go_up_gap;
+			low_rssithresh_for_ra += go_up_gap;
+			break;
+		default:
+			break;
+		}
+
+		if (rtlpriv->dm.undec_sm_pwdb >
+		    (long)high_rssithresh_for_ra)
+			ra->ratr_state = DM_RATR_STA_HIGH;
+		else if (rtlpriv->dm.undec_sm_pwdb >
+			 (long)low_rssithresh_for_ra)
+			ra->ratr_state = DM_RATR_STA_MIDDLE;
+		else
+			ra->ratr_state = DM_RATR_STA_LOW;
+
+		if (ra->pre_ratr_state != ra->ratr_state) {
+			RT_TRACE(rtlpriv, COMP_RATE, DBG_LOUD,
+				 "RSSI = %ld\n",
+				 rtlpriv->dm.undec_sm_pwdb);
+			RT_TRACE(rtlpriv, COMP_RATE, DBG_LOUD,
+				 "RSSI_LEVEL = %d\n", ra->ratr_state);
+			RT_TRACE(rtlpriv, COMP_RATE, DBG_LOUD,
+				 "PreState = %d, CurState = %d\n",
+				 ra->pre_ratr_state, ra->ratr_state);
+
+			rcu_read_lock();
+			sta = rtl_find_sta(hw, mac->bssid);
+			if (sta)
+				rtlpriv->cfg->ops->update_rate_tbl(hw, sta,
+							   ra->ratr_state);
+			rcu_read_unlock();
+
+			ra->pre_ratr_state = ra->ratr_state;
+		}
+	}
+}
+
+static bool rtl8723be_dm_is_edca_turbo_disable(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	if (rtlpriv->cfg->ops->get_btc_status()) {
+		if (rtlpriv->btcoexist.btc_ops->btc_is_disable_edca_turbo(rtlpriv))
+			return true;
+	}
+	if (rtlpriv->mac80211.mode == WIRELESS_MODE_B)
+		return true;
+
+	return false;
+}
+
+static void rtl8723be_dm_check_edca_turbo(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	static u64 last_txok_cnt;
+	static u64 last_rxok_cnt;
+	u64 cur_txok_cnt = 0;
+	u64 cur_rxok_cnt = 0;
+	u32 edca_be_ul = 0x6ea42b;
+	u32 edca_be_dl = 0x6ea42b;/*not sure*/
+	u32 edca_be = 0x5ea42b;
+	u32 iot_peer = 0;
+	bool is_cur_rdlstate;
+	bool last_is_cur_rdlstate = false;
+	bool bias_on_rx = false;
+	bool edca_turbo_on = false;
+
+	last_is_cur_rdlstate = rtlpriv->dm.is_cur_rdlstate;
+
+	cur_txok_cnt = rtlpriv->stats.txbytesunicast - last_txok_cnt;
+	cur_rxok_cnt = rtlpriv->stats.rxbytesunicast - last_rxok_cnt;
+
+	iot_peer = rtlpriv->mac80211.vendor;
+	bias_on_rx = (iot_peer == PEER_RAL || iot_peer == PEER_ATH) ?
+		     true : false;
+	edca_turbo_on = ((!rtlpriv->dm.is_any_nonbepkts) &&
+			 (!rtlpriv->dm.disable_framebursting)) ?
+			 true : false;
+
+	if ((iot_peer == PEER_CISCO) &&
+	    (mac->mode == WIRELESS_MODE_N_24G)) {
+		edca_be_dl = edca_setting_dl[iot_peer];
+		edca_be_ul = edca_setting_ul[iot_peer];
+	}
+	if (rtl8723be_dm_is_edca_turbo_disable(hw))
+		goto exit;
+
+	if (edca_turbo_on) {
+		if (bias_on_rx)
+			is_cur_rdlstate = (cur_txok_cnt > cur_rxok_cnt * 4) ?
+					  false : true;
+		else
+			is_cur_rdlstate = (cur_rxok_cnt > cur_txok_cnt * 4) ?
+					  true : false;
+
+		edca_be = (is_cur_rdlstate) ? edca_be_dl : edca_be_ul;
+		rtl_write_dword(rtlpriv, REG_EDCA_BE_PARAM, edca_be);
+		rtlpriv->dm.is_cur_rdlstate = is_cur_rdlstate;
+		rtlpriv->dm.current_turbo_edca = true;
+	} else {
+		if (rtlpriv->dm.current_turbo_edca) {
+			u8 tmp = AC0_BE;
+			rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_AC_PARAM,
+						      (u8 *)(&tmp));
+		}
+		rtlpriv->dm.current_turbo_edca = false;
+	}
+
+exit:
+	rtlpriv->dm.is_any_nonbepkts = false;
+	last_txok_cnt = rtlpriv->stats.txbytesunicast;
+	last_rxok_cnt = rtlpriv->stats.rxbytesunicast;
+}
+
+static void rtl8723be_dm_cck_packet_detection_thresh(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8 cur_cck_cca_thresh;
+
+	if (rtlpriv->mac80211.link_state >= MAC80211_LINKED) {
+		if (rtlpriv->dm_digtable.rssi_val_min > 25) {
+			cur_cck_cca_thresh = 0xcd;
+		} else if ((rtlpriv->dm_digtable.rssi_val_min <= 25) &&
+			   (rtlpriv->dm_digtable.rssi_val_min > 10)) {
+			cur_cck_cca_thresh = 0x83;
+		} else {
+			if (rtlpriv->falsealm_cnt.cnt_cck_fail > 1000)
+				cur_cck_cca_thresh = 0x83;
+			else
+				cur_cck_cca_thresh = 0x40;
+		}
+	} else {
+		if (rtlpriv->falsealm_cnt.cnt_cck_fail > 1000)
+			cur_cck_cca_thresh = 0x83;
+		else
+			cur_cck_cca_thresh = 0x40;
+	}
+
+	if (rtlpriv->dm_digtable.cur_cck_cca_thres != cur_cck_cca_thresh)
+		rtl_set_bbreg(hw, RCCK0_CCA, MASKBYTE2, cur_cck_cca_thresh);
+
+	rtlpriv->dm_digtable.pre_cck_cca_thres = rtlpriv->dm_digtable.cur_cck_cca_thres;
+	rtlpriv->dm_digtable.cur_cck_cca_thres = cur_cck_cca_thresh;
+	RT_TRACE(rtlpriv, COMP_DIG, DBG_TRACE,
+		 "CCK cca thresh hold =%x\n",
+		 rtlpriv->dm_digtable.cur_cck_cca_thres);
+}
+
+static void rtl8723be_dm_dynamic_edcca(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8 reg_c50, reg_c58;
+	bool fw_current_in_ps_mode = false;
+
+	rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_FW_PSMODE_STATUS,
+				      (u8 *)(&fw_current_in_ps_mode));
+	if (fw_current_in_ps_mode)
+		return;
+
+	reg_c50 = rtl_get_bbreg(hw, ROFDM0_XAAGCCORE1, MASKBYTE0);
+	reg_c58 = rtl_get_bbreg(hw, ROFDM0_XBAGCCORE1, MASKBYTE0);
+
+	if (reg_c50 > 0x28 && reg_c58 > 0x28) {
+		if (!rtlpriv->rtlhal.pre_edcca_enable) {
+			rtl_write_byte(rtlpriv, ROFDM0_ECCATHRESHOLD, 0x03);
+			rtl_write_byte(rtlpriv, ROFDM0_ECCATHRESHOLD + 2, 0x00);
+		}
+	} else if (reg_c50 < 0x25 && reg_c58 < 0x25) {
+		if (rtlpriv->rtlhal.pre_edcca_enable) {
+			rtl_write_byte(rtlpriv, ROFDM0_ECCATHRESHOLD, 0x7f);
+			rtl_write_byte(rtlpriv, ROFDM0_ECCATHRESHOLD + 2, 0x7f);
+		}
+	}
+}
+
+static void rtl8723be_dm_dynamic_atc_switch(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_dm *rtldm = rtl_dm(rtl_priv(hw));
+	u8 crystal_cap;
+	u32 packet_count;
+	int cfo_khz_a, cfo_khz_b, cfo_ave = 0, adjust_xtal = 0;
+	int cfo_ave_diff;
+
+	if (rtlpriv->mac80211.link_state < MAC80211_LINKED) {
+		if (rtldm->atc_status == ATC_STATUS_OFF) {
+			rtl_set_bbreg(hw, ROFDM1_CFOTRACKING, BIT(11),
+				      ATC_STATUS_ON);
+			rtldm->atc_status = ATC_STATUS_ON;
+		}
+		if (rtlpriv->cfg->ops->get_btc_status()) {
+			if (!rtlpriv->btcoexist.btc_ops->btc_is_bt_disabled(rtlpriv)) {
+				RT_TRACE(rtlpriv, COMP_BT_COEXIST, DBG_LOUD,
+					 "odm_DynamicATCSwitch(): Disable"
+					 " CFO tracking for BT!!\n");
+				return;
+			}
+		}
+
+		if (rtldm->crystal_cap != rtlpriv->efuse.crystalcap) {
+			rtldm->crystal_cap = rtlpriv->efuse.crystalcap;
+			crystal_cap = rtldm->crystal_cap & 0x3f;
+			rtl_set_bbreg(hw, REG_MAC_PHY_CTRL, 0xFFF000,
+				      (crystal_cap | (crystal_cap << 6)));
+		}
+	} else {
+		cfo_khz_a = (int)(rtldm->cfo_tail[0] * 3125) / 1280;
+		cfo_khz_b = (int)(rtldm->cfo_tail[1] * 3125) / 1280;
+		packet_count = rtldm->packet_count;
+
+		if (packet_count == rtldm->packet_count_pre)
+			return;
+
+		rtldm->packet_count_pre = packet_count;
+
+		if (rtlpriv->phy.rf_type == RF_1T1R)
+			cfo_ave = cfo_khz_a;
+		else
+			cfo_ave = (int)(cfo_khz_a + cfo_khz_b) >> 1;
+
+		cfo_ave_diff = (rtldm->cfo_ave_pre >= cfo_ave) ?
+			       (rtldm->cfo_ave_pre - cfo_ave) :
+			       (cfo_ave - rtldm->cfo_ave_pre);
+
+		if (cfo_ave_diff > 20 && rtldm->large_cfo_hit == 0) {
+			rtldm->large_cfo_hit = 1;
+			return;
+		} else {
+			rtldm->large_cfo_hit = 0;
+		}
+
+		rtldm->cfo_ave_pre = cfo_ave;
+
+		if (cfo_ave >= -rtldm->cfo_threshold &&
+		    cfo_ave <= rtldm->cfo_threshold && rtldm->is_freeze == 0) {
+			if (rtldm->cfo_threshold == CFO_THRESHOLD_XTAL) {
+				rtldm->cfo_threshold = CFO_THRESHOLD_XTAL + 10;
+				rtldm->is_freeze = 1;
+			} else {
+				rtldm->cfo_threshold = CFO_THRESHOLD_XTAL;
+			}
+		}
+
+		if (cfo_ave > rtldm->cfo_threshold && rtldm->crystal_cap < 0x3f)
+			adjust_xtal = ((cfo_ave - CFO_THRESHOLD_XTAL) >> 1) + 1;
+		else if ((cfo_ave < -rtlpriv->dm.cfo_threshold) &&
+					rtlpriv->dm.crystal_cap > 0)
+			adjust_xtal = ((cfo_ave + CFO_THRESHOLD_XTAL) >> 1) - 1;
+
+		if (adjust_xtal != 0) {
+			rtldm->is_freeze = 0;
+			rtldm->crystal_cap += adjust_xtal;
+
+			if (rtldm->crystal_cap > 0x3f)
+				rtldm->crystal_cap = 0x3f;
+			else if (rtldm->crystal_cap < 0)
+				rtldm->crystal_cap = 0;
+
+			crystal_cap = rtldm->crystal_cap & 0x3f;
+			rtl_set_bbreg(hw, REG_MAC_PHY_CTRL, 0xFFF000,
+				      (crystal_cap | (crystal_cap << 6)));
+		}
+
+		if (cfo_ave < CFO_THRESHOLD_ATC &&
+		    cfo_ave > -CFO_THRESHOLD_ATC) {
+			if (rtldm->atc_status == ATC_STATUS_ON) {
+				rtl_set_bbreg(hw, ROFDM1_CFOTRACKING, BIT(11),
+					      ATC_STATUS_OFF);
+				rtldm->atc_status = ATC_STATUS_OFF;
+			}
+		} else {
+			if (rtldm->atc_status == ATC_STATUS_OFF) {
+				rtl_set_bbreg(hw, ROFDM1_CFOTRACKING, BIT(11),
+					      ATC_STATUS_ON);
+				rtldm->atc_status = ATC_STATUS_ON;
+			}
+		}
+	}
+}
+
+static void rtl8723be_dm_common_info_self_update(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_sta_info *drv_priv;
+	u8 cnt = 0;
+
+	rtlpriv->dm.one_entry_only = false;
+
+	if (rtlpriv->mac80211.opmode == NL80211_IFTYPE_STATION &&
+	    rtlpriv->mac80211.link_state >= MAC80211_LINKED) {
+		rtlpriv->dm.one_entry_only = true;
+		return;
+	}
+
+	if (rtlpriv->mac80211.opmode == NL80211_IFTYPE_AP ||
+	    rtlpriv->mac80211.opmode == NL80211_IFTYPE_ADHOC ||
+	    rtlpriv->mac80211.opmode == NL80211_IFTYPE_MESH_POINT) {
+		spin_lock_bh(&rtlpriv->locks.entry_list_lock);
+		list_for_each_entry(drv_priv, &rtlpriv->entry_list, list) {
+			cnt++;
+		}
+		spin_unlock_bh(&rtlpriv->locks.entry_list_lock);
+
+		if (cnt == 1)
+			rtlpriv->dm.one_entry_only = true;
+	}
+}
+
+void rtl8723be_dm_watchdog(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	bool fw_current_inpsmode = false;
+	bool fw_ps_awake = true;
+
+	rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_FW_PSMODE_STATUS,
+				      (u8 *)(&fw_current_inpsmode));
+
+	rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_FWLPS_RF_ON,
+				      (u8 *)(&fw_ps_awake));
+
+	if (ppsc->p2p_ps_info.p2p_ps_mode)
+		fw_ps_awake = false;
+
+	if ((ppsc->rfpwr_state == ERFON) &&
+	    ((!fw_current_inpsmode) && fw_ps_awake) &&
+	    (!ppsc->rfchange_inprogress)) {
+		rtl8723be_dm_common_info_self_update(hw);
+		rtl8723be_dm_false_alarm_counter_statistics(hw);
+		rtl8723be_dm_check_rssi_monitor(hw);
+		rtl8723be_dm_dig(hw);
+		rtl8723be_dm_dynamic_edcca(hw);
+		rtl8723be_dm_cck_packet_detection_thresh(hw);
+		rtl8723be_dm_refresh_rate_adaptive_mask(hw);
+		rtl8723be_dm_check_edca_turbo(hw);
+		rtl8723be_dm_dynamic_atc_switch(hw);
+		rtl8723be_dm_check_txpower_tracking(hw);
+		rtl8723be_dm_dynamic_txpower(hw);
+		if (rtlpriv->cfg->ops->get_btc_status())
+			rtlpriv->btcoexist.btc_ops->btc_periodical(rtlpriv);
+	}
+	rtlpriv->dm.dbginfo.num_qry_beacon_pkt = 0;
+}
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/dm.h b/drivers/net/wireless/rtlwifi/rtl8723be/dm.h
new file mode 100644
index 000000000000..c6c2f2a78a66
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/dm.h
@@ -0,0 +1,310 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2014  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef	__RTL8723BE_DM_H__
+#define __RTL8723BE_DM_H__
+
+#define	MAIN_ANT		0
+#define	AUX_ANT			1
+#define	MAIN_ANT_CG_TRX		1
+#define	AUX_ANT_CG_TRX		0
+#define	MAIN_ANT_CGCS_RX	0
+#define	AUX_ANT_CGCS_RX		1
+
+#define	TXSCALE_TABLE_SIZE	30
+
+/*RF REG LIST*/
+#define	DM_REG_RF_MODE_11N			0x00
+#define	DM_REG_RF_0B_11N			0x0B
+#define	DM_REG_CHNBW_11N			0x18
+#define	DM_REG_T_METER_11N			0x24
+#define	DM_REG_RF_25_11N			0x25
+#define	DM_REG_RF_26_11N			0x26
+#define	DM_REG_RF_27_11N			0x27
+#define	DM_REG_RF_2B_11N			0x2B
+#define	DM_REG_RF_2C_11N			0x2C
+#define	DM_REG_RXRF_A3_11N			0x3C
+#define	DM_REG_T_METER_92D_11N			0x42
+#define	DM_REG_T_METER_88E_11N			0x42
+
+/*BB REG LIST*/
+/*PAGE 8 */
+#define	DM_REG_BB_CTRL_11N			0x800
+#define	DM_REG_RF_PIN_11N			0x804
+#define	DM_REG_PSD_CTRL_11N			0x808
+#define	DM_REG_TX_ANT_CTRL_11N			0x80C
+#define	DM_REG_BB_PWR_SAV5_11N			0x818
+#define	DM_REG_CCK_RPT_FORMAT_11N		0x824
+#define	DM_REG_RX_DEFUALT_A_11N			0x858
+#define	DM_REG_RX_DEFUALT_B_11N			0x85A
+#define	DM_REG_BB_PWR_SAV3_11N			0x85C
+#define	DM_REG_ANTSEL_CTRL_11N			0x860
+#define	DM_REG_RX_ANT_CTRL_11N			0x864
+#define	DM_REG_PIN_CTRL_11N			0x870
+#define	DM_REG_BB_PWR_SAV1_11N			0x874
+#define	DM_REG_ANTSEL_PATH_11N			0x878
+#define	DM_REG_BB_3WIRE_11N			0x88C
+#define	DM_REG_SC_CNT_11N			0x8C4
+#define	DM_REG_PSD_DATA_11N			0x8B4
+/*PAGE 9*/
+#define	DM_REG_ANT_MAPPING1_11N			0x914
+#define	DM_REG_ANT_MAPPING2_11N			0x918
+/*PAGE A*/
+#define	DM_REG_CCK_ANTDIV_PARA1_11N		0xA00
+#define	DM_REG_CCK_CCA_11N			0xA0A
+#define	DM_REG_CCK_ANTDIV_PARA2_11N		0xA0C
+#define	DM_REG_CCK_ANTDIV_PARA3_11N		0xA10
+#define	DM_REG_CCK_ANTDIV_PARA4_11N		0xA14
+#define	DM_REG_CCK_FILTER_PARA1_11N		0xA22
+#define	DM_REG_CCK_FILTER_PARA2_11N		0xA23
+#define	DM_REG_CCK_FILTER_PARA3_11N		0xA24
+#define	DM_REG_CCK_FILTER_PARA4_11N		0xA25
+#define	DM_REG_CCK_FILTER_PARA5_11N		0xA26
+#define	DM_REG_CCK_FILTER_PARA6_11N		0xA27
+#define	DM_REG_CCK_FILTER_PARA7_11N		0xA28
+#define	DM_REG_CCK_FILTER_PARA8_11N		0xA29
+#define	DM_REG_CCK_FA_RST_11N			0xA2C
+#define	DM_REG_CCK_FA_MSB_11N			0xA58
+#define	DM_REG_CCK_FA_LSB_11N			0xA5C
+#define	DM_REG_CCK_CCA_CNT_11N			0xA60
+#define	DM_REG_BB_PWR_SAV4_11N			0xA74
+/*PAGE B */
+#define	DM_REG_LNA_SWITCH_11N			0xB2C
+#define	DM_REG_PATH_SWITCH_11N			0xB30
+#define	DM_REG_RSSI_CTRL_11N			0xB38
+#define	DM_REG_CONFIG_ANTA_11N			0xB68
+#define	DM_REG_RSSI_BT_11N			0xB9C
+/*PAGE C */
+#define	DM_REG_OFDM_FA_HOLDC_11N		0xC00
+#define	DM_REG_RX_PATH_11N			0xC04
+#define	DM_REG_TRMUX_11N			0xC08
+#define	DM_REG_OFDM_FA_RSTC_11N			0xC0C
+#define	DM_REG_RXIQI_MATRIX_11N			0xC14
+#define	DM_REG_TXIQK_MATRIX_LSB1_11N		0xC4C
+#define	DM_REG_IGI_A_11N			0xC50
+#define	DM_REG_ANTDIV_PARA2_11N			0xC54
+#define	DM_REG_IGI_B_11N			0xC58
+#define	DM_REG_ANTDIV_PARA3_11N			0xC5C
+#define	DM_REG_BB_PWR_SAV2_11N			0xC70
+#define	DM_REG_RX_OFF_11N			0xC7C
+#define	DM_REG_TXIQK_MATRIXA_11N		0xC80
+#define	DM_REG_TXIQK_MATRIXB_11N		0xC88
+#define	DM_REG_TXIQK_MATRIXA_LSB2_11N		0xC94
+#define	DM_REG_TXIQK_MATRIXB_LSB2_11N		0xC9C
+#define	DM_REG_RXIQK_MATRIX_LSB_11N		0xCA0
+#define	DM_REG_ANTDIV_PARA1_11N			0xCA4
+#define	DM_REG_OFDM_FA_TYPE1_11N		0xCF0
+/*PAGE D */
+#define	DM_REG_OFDM_FA_RSTD_11N			0xD00
+#define	DM_REG_OFDM_FA_TYPE2_11N		0xDA0
+#define	DM_REG_OFDM_FA_TYPE3_11N		0xDA4
+#define	DM_REG_OFDM_FA_TYPE4_11N		0xDA8
+/*PAGE E */
+#define	DM_REG_TXAGC_A_6_18_11N			0xE00
+#define	DM_REG_TXAGC_A_24_54_11N		0xE04
+#define	DM_REG_TXAGC_A_1_MCS32_11N		0xE08
+#define	DM_REG_TXAGC_A_MCS0_3_11N		0xE10
+#define	DM_REG_TXAGC_A_MCS4_7_11N		0xE14
+#define	DM_REG_TXAGC_A_MCS8_11_11N		0xE18
+#define	DM_REG_TXAGC_A_MCS12_15_11N		0xE1C
+#define	DM_REG_FPGA0_IQK_11N			0xE28
+#define	DM_REG_TXIQK_TONE_A_11N			0xE30
+#define	DM_REG_RXIQK_TONE_A_11N			0xE34
+#define	DM_REG_TXIQK_PI_A_11N			0xE38
+#define	DM_REG_RXIQK_PI_A_11N			0xE3C
+#define	DM_REG_TXIQK_11N			0xE40
+#define	DM_REG_RXIQK_11N			0xE44
+#define	DM_REG_IQK_AGC_PTS_11N			0xE48
+#define	DM_REG_IQK_AGC_RSP_11N			0xE4C
+#define	DM_REG_BLUETOOTH_11N			0xE6C
+#define	DM_REG_RX_WAIT_CCA_11N			0xE70
+#define	DM_REG_TX_CCK_RFON_11N			0xE74
+#define	DM_REG_TX_CCK_BBON_11N			0xE78
+#define	DM_REG_OFDM_RFON_11N			0xE7C
+#define	DM_REG_OFDM_BBON_11N			0xE80
+#define DM_REG_TX2RX_11N			0xE84
+#define	DM_REG_TX2TX_11N			0xE88
+#define	DM_REG_RX_CCK_11N			0xE8C
+#define	DM_REG_RX_OFDM_11N			0xED0
+#define	DM_REG_RX_WAIT_RIFS_11N			0xED4
+#define	DM_REG_RX2RX_11N			0xED8
+#define	DM_REG_STANDBY_11N			0xEDC
+#define	DM_REG_SLEEP_11N			0xEE0
+#define	DM_REG_PMPD_ANAEN_11N			0xEEC
+
+/*MAC REG LIST*/
+#define	DM_REG_BB_RST_11N			0x02
+#define	DM_REG_ANTSEL_PIN_11N			0x4C
+#define	DM_REG_EARLY_MODE_11N			0x4D0
+#define	DM_REG_RSSI_MONITOR_11N			0x4FE
+#define	DM_REG_EDCA_VO_11N			0x500
+#define	DM_REG_EDCA_VI_11N			0x504
+#define	DM_REG_EDCA_BE_11N			0x508
+#define	DM_REG_EDCA_BK_11N			0x50C
+#define	DM_REG_TXPAUSE_11N			0x522
+#define	DM_REG_RESP_TX_11N			0x6D8
+#define	DM_REG_ANT_TRAIN_PARA1_11N		0x7b0
+#define	DM_REG_ANT_TRAIN_PARA2_11N		0x7b4
+
+/*DIG Related*/
+#define	DM_BIT_IGI_11N				0x0000007F
+
+#define HAL_DM_DIG_DISABLE			BIT(0)
+#define HAL_DM_HIPWR_DISABLE			BIT(1)
+
+#define OFDM_TABLE_LENGTH			43
+#define CCK_TABLE_LENGTH			33
+
+#define OFDM_TABLE_SIZE				37
+#define CCK_TABLE_SIZE				33
+
+#define BW_AUTO_SWITCH_HIGH_LOW			25
+#define BW_AUTO_SWITCH_LOW_HIGH			30
+
+#define DM_DIG_THRESH_HIGH			40
+#define DM_DIG_THRESH_LOW			35
+
+#define DM_FALSEALARM_THRESH_LOW		400
+#define DM_FALSEALARM_THRESH_HIGH		1000
+
+#define DM_DIG_MAX				0x3e
+#define DM_DIG_MIN				0x1e
+
+#define DM_DIG_MAX_AP				0x32
+#define DM_DIG_MIN_AP				0x20
+
+#define DM_DIG_FA_UPPER				0x3e
+#define DM_DIG_FA_LOWER				0x1e
+#define DM_DIG_FA_TH0				0x200
+#define DM_DIG_FA_TH1				0x300
+#define DM_DIG_FA_TH2				0x400
+
+#define DM_DIG_BACKOFF_MAX			12
+#define DM_DIG_BACKOFF_MIN			-4
+#define DM_DIG_BACKOFF_DEFAULT			10
+
+#define RXPATHSELECTION_DIFF_TH			18
+
+#define DM_RATR_STA_INIT			0
+#define DM_RATR_STA_HIGH			1
+#define DM_RATR_STA_MIDDLE			2
+#define DM_RATR_STA_LOW				3
+
+#define CTS2SELF_THVAL				30
+#define REGC38_TH				20
+
+#define TXHIGHPWRLEVEL_NORMAL			0
+#define TXHIGHPWRLEVEL_LEVEL1			1
+#define TXHIGHPWRLEVEL_LEVEL2			2
+#define TXHIGHPWRLEVEL_BT1			3
+#define TXHIGHPWRLEVEL_BT2			4
+
+#define DM_TYPE_BYFW				0
+#define DM_TYPE_BYDRIVER			1
+
+#define TX_POWER_NEAR_FIELD_THRESH_LVL2		74
+#define TX_POWER_NEAR_FIELD_THRESH_LVL1		67
+#define TXPWRTRACK_MAX_IDX			6
+
+/* Dynamic ATC switch */
+#define ATC_STATUS_OFF				0x0 /* enable */
+#define	ATC_STATUS_ON				0x1 /* disable */
+#define	CFO_THRESHOLD_XTAL			10 /* kHz */
+#define	CFO_THRESHOLD_ATC			80 /* kHz */
+
+enum FAT_STATE {
+	FAT_NORMAL_STATE	= 0,
+	FAT_TRAINING_STATE	= 1,
+};
+
+enum tag_dynamic_init_gain_operation_type_definition {
+	DIG_TYPE_THRESH_HIGH	= 0,
+	DIG_TYPE_THRESH_LOW	= 1,
+	DIG_TYPE_BACKOFF	= 2,
+	DIG_TYPE_RX_GAIN_MIN	= 3,
+	DIG_TYPE_RX_GAIN_MAX	= 4,
+	DIG_TYPE_ENABLE		= 5,
+	DIG_TYPE_DISABLE	= 6,
+	DIG_OP_TYPE_MAX
+};
+
+enum dm_1r_cca_e {
+	CCA_1R		= 0,
+	CCA_2R		= 1,
+	CCA_MAX		= 2,
+};
+
+enum dm_rf_e {
+	RF_SAVE		= 0,
+	RF_NORMAL	= 1,
+	RF_MAX		= 2,
+};
+
+enum dm_sw_ant_switch_e {
+	ANS_ANTENNA_B	= 1,
+	ANS_ANTENNA_A	= 2,
+	ANS_ANTENNA_MAX	= 3,
+};
+
+enum dm_dig_ext_port_alg_e {
+	DIG_EXT_PORT_STAGE_0	= 0,
+	DIG_EXT_PORT_STAGE_1	= 1,
+	DIG_EXT_PORT_STAGE_2	= 2,
+	DIG_EXT_PORT_STAGE_3	= 3,
+	DIG_EXT_PORT_STAGE_MAX	= 4,
+};
+
+enum dm_dig_connect_e {
+	DIG_STA_DISCONNECT	= 0,
+	DIG_STA_CONNECT		= 1,
+	DIG_STA_BEFORE_CONNECT	= 2,
+	DIG_MULTISTA_DISCONNECT	= 3,
+	DIG_MULTISTA_CONNECT	= 4,
+	DIG_CONNECT_MAX
+};
+
+enum pwr_track_control_method {
+	BBSWING,
+	TXAGC
+};
+
+#define BT_RSSI_STATE_NORMAL_POWER      BIT_OFFSET_LEN_MASK_32(0, 1)
+#define BT_RSSI_STATE_AMDPU_OFF         BIT_OFFSET_LEN_MASK_32(1, 1)
+#define BT_RSSI_STATE_SPECIAL_LOW       BIT_OFFSET_LEN_MASK_32(2, 1)
+#define BT_RSSI_STATE_BG_EDCA_LOW       BIT_OFFSET_LEN_MASK_32(3, 1)
+#define BT_RSSI_STATE_TXPOWER_LOW       BIT_OFFSET_LEN_MASK_32(4, 1)
+
+void rtl8723be_dm_set_tx_ant_by_tx_info(struct ieee80211_hw *hw, u8 *pdesc,
+					u32 mac_id);
+void rtl8723be_dm_ant_sel_statistics(struct ieee80211_hw *hw, u8 antsel_tr_mux,
+				     u32 mac_id, u32 rx_pwdb_all);
+void rtl8723be_dm_fast_antenna_trainning_callback(unsigned long data);
+void rtl8723be_dm_init(struct ieee80211_hw *hw);
+void rtl8723be_dm_watchdog(struct ieee80211_hw *hw);
+void rtl8723be_dm_write_dig(struct ieee80211_hw *hw, u8 current_igi);
+void rtl8723be_dm_check_txpower_tracking(struct ieee80211_hw *hw);
+void rtl8723be_dm_init_rate_adaptive_mask(struct ieee80211_hw *hw);
+void rtl8723be_dm_txpower_track_adjust(struct ieee80211_hw *hw, u8 type,
+				       u8 *pdirection, u32 *poutwrite_val);
+void rtl8723be_dm_init_edca_turbo(struct ieee80211_hw *hw);
+
+#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/fw.c b/drivers/net/wireless/rtlwifi/rtl8723be/fw.c
new file mode 100644
index 000000000000..0f3522db5b37
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/fw.c
@@ -0,0 +1,628 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2014  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "../pci.h"
+#include "../base.h"
+#include "reg.h"
+#include "def.h"
+#include "fw.h"
+#include "../rtl8723com/fw_common.h"
+
+static bool _rtl8723be_check_fw_read_last_h2c(struct ieee80211_hw *hw,
+					      u8 boxnum)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8 val_hmetfr;
+	bool result = false;
+
+	val_hmetfr = rtl_read_byte(rtlpriv, REG_HMETFR);
+	if (((val_hmetfr >> boxnum) & BIT(0)) == 0)
+		result = true;
+	return result;
+}
+
+static void _rtl8723be_fill_h2c_command(struct ieee80211_hw *hw, u8 element_id,
+					u32 cmd_len, u8 *p_cmdbuffer)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	u8 boxnum;
+	u16 box_reg = 0, box_extreg = 0;
+	u8 u1b_tmp;
+	bool isfw_read = false;
+	u8 buf_index = 0;
+	bool bwrite_sucess = false;
+	u8 wait_h2c_limit = 100;
+	u8 wait_writeh2c_limit = 100;
+	u8 boxcontent[4], boxextcontent[4];
+	u32 h2c_waitcounter = 0;
+	unsigned long flag;
+	u8 idx;
+
+	RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD, "come in\n");
+
+	while (true) {
+		spin_lock_irqsave(&rtlpriv->locks.h2c_lock, flag);
+		if (rtlhal->h2c_setinprogress) {
+			RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+				 "H2C set in progress! Wait to set.."
+				 "element_id(%d).\n", element_id);
+
+			while (rtlhal->h2c_setinprogress) {
+				spin_unlock_irqrestore(&rtlpriv->locks.h2c_lock,
+						       flag);
+				h2c_waitcounter++;
+				RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+					 "Wait 100 us (%d times)...\n",
+					 h2c_waitcounter);
+				udelay(100);
+
+				if (h2c_waitcounter > 1000)
+					return;
+				spin_lock_irqsave(&rtlpriv->locks.h2c_lock,
+						  flag);
+			}
+			spin_unlock_irqrestore(&rtlpriv->locks.h2c_lock, flag);
+		} else {
+			rtlhal->h2c_setinprogress = true;
+			spin_unlock_irqrestore(&rtlpriv->locks.h2c_lock, flag);
+			break;
+		}
+	}
+	while (!bwrite_sucess) {
+		wait_writeh2c_limit--;
+		if (wait_writeh2c_limit == 0) {
+			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+				 "Write H2C fail because no trigger "
+				 "for FW INT!\n");
+			break;
+		}
+		boxnum = rtlhal->last_hmeboxnum;
+		switch (boxnum) {
+		case 0:
+			box_reg = REG_HMEBOX_0;
+			box_extreg = REG_HMEBOX_EXT_0;
+			break;
+		case 1:
+			box_reg = REG_HMEBOX_1;
+			box_extreg = REG_HMEBOX_EXT_1;
+			break;
+		case 2:
+			box_reg = REG_HMEBOX_2;
+			box_extreg = REG_HMEBOX_EXT_2;
+			break;
+		case 3:
+			box_reg = REG_HMEBOX_3;
+			box_extreg = REG_HMEBOX_EXT_3;
+			break;
+		default:
+			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+				 "switch case not processed\n");
+			break;
+		}
+		isfw_read = _rtl8723be_check_fw_read_last_h2c(hw, boxnum);
+		while (!isfw_read) {
+			wait_h2c_limit--;
+			if (wait_h2c_limit == 0) {
+				RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+					 "Wating too long for FW read "
+					 "clear HMEBox(%d)!\n", boxnum);
+				break;
+			}
+			udelay(10);
+
+			isfw_read = _rtl8723be_check_fw_read_last_h2c(hw,
+								boxnum);
+			u1b_tmp = rtl_read_byte(rtlpriv, 0x130);
+			RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+				 "Wating for FW read clear HMEBox(%d)!!! 0x130 = %2x\n",
+				 boxnum, u1b_tmp);
+		}
+		if (!isfw_read) {
+			RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+				 "Write H2C register BOX[%d] fail!!!!! "
+				 "Fw do not read.\n", boxnum);
+			break;
+		}
+		memset(boxcontent, 0, sizeof(boxcontent));
+		memset(boxextcontent, 0, sizeof(boxextcontent));
+		boxcontent[0] = element_id;
+		RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+			 "Write element_id box_reg(%4x) = %2x\n",
+			 box_reg, element_id);
+
+		switch (cmd_len) {
+		case 1:
+		case 2:
+		case 3:
+			/*boxcontent[0] &= ~(BIT(7));*/
+			memcpy((u8 *)(boxcontent) + 1,
+			       p_cmdbuffer + buf_index, cmd_len);
+
+			for (idx = 0; idx < 4; idx++) {
+				rtl_write_byte(rtlpriv, box_reg + idx,
+					       boxcontent[idx]);
+			}
+			break;
+		case 4:
+		case 5:
+		case 6:
+		case 7:
+			/*boxcontent[0] |= (BIT(7));*/
+			memcpy((u8 *)(boxextcontent),
+			       p_cmdbuffer + buf_index+3, cmd_len-3);
+			memcpy((u8 *)(boxcontent) + 1,
+			       p_cmdbuffer + buf_index, 3);
+
+			for (idx = 0; idx < 4; idx++) {
+				rtl_write_byte(rtlpriv, box_extreg + idx,
+					       boxextcontent[idx]);
+			}
+			for (idx = 0; idx < 4; idx++) {
+				rtl_write_byte(rtlpriv, box_reg + idx,
+					       boxcontent[idx]);
+			}
+			break;
+		default:
+			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+				 "switch case not process\n");
+			break;
+		}
+		bwrite_sucess = true;
+
+		rtlhal->last_hmeboxnum = boxnum + 1;
+		if (rtlhal->last_hmeboxnum == 4)
+			rtlhal->last_hmeboxnum = 0;
+
+		RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+			 "pHalData->last_hmeboxnum  = %d\n",
+			 rtlhal->last_hmeboxnum);
+	}
+	if (!rtlpriv) {
+		pr_err("rtlpriv bad\n");
+		return;
+	}
+	if (!rtlhal) {
+		pr_err("rtlhal bad\n");
+		return;
+	}
+	spin_lock_irqsave(&rtlpriv->locks.h2c_lock, flag);
+	rtlhal->h2c_setinprogress = false;
+	spin_unlock_irqrestore(&rtlpriv->locks.h2c_lock, flag);
+
+	RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD, "go out\n");
+}
+
+void rtl8723be_fill_h2c_cmd(struct ieee80211_hw *hw, u8 element_id,
+			    u32 cmd_len, u8 *p_cmdbuffer)
+{
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	u32 tmp_cmdbuf[2];
+
+	if (!rtlhal->fw_ready) {
+		RT_ASSERT(false,
+			  "return H2C cmd because of Fw download fail!!!\n");
+		return;
+	}
+	memset(tmp_cmdbuf, 0, 8);
+	memcpy(tmp_cmdbuf, p_cmdbuffer, cmd_len);
+	_rtl8723be_fill_h2c_command(hw, element_id, cmd_len,
+				    (u8 *)&tmp_cmdbuf);
+	return;
+}
+
+void rtl8723be_set_fw_pwrmode_cmd(struct ieee80211_hw *hw, u8 mode)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8 u1_h2c_set_pwrmode[H2C_8723BE_PWEMODE_LENGTH] = { 0 };
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	u8 rlbm, power_state = 0;
+	RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD, "FW LPS mode = %d\n", mode);
+
+	SET_H2CCMD_PWRMODE_PARM_MODE(u1_h2c_set_pwrmode, ((mode) ? 1 : 0));
+	rlbm = 0;/*YJ, temp, 120316. FW now not support RLBM = 2.*/
+	SET_H2CCMD_PWRMODE_PARM_RLBM(u1_h2c_set_pwrmode, rlbm);
+	SET_H2CCMD_PWRMODE_PARM_SMART_PS(u1_h2c_set_pwrmode,
+					 (rtlpriv->mac80211.p2p) ?
+					 ppsc->smart_ps : 1);
+	SET_H2CCMD_PWRMODE_PARM_AWAKE_INTERVAL(u1_h2c_set_pwrmode,
+					       ppsc->reg_max_lps_awakeintvl);
+	SET_H2CCMD_PWRMODE_PARM_ALL_QUEUE_UAPSD(u1_h2c_set_pwrmode, 0);
+	if (mode == FW_PS_ACTIVE_MODE)
+		power_state |= FW_PWR_STATE_ACTIVE;
+	else
+		power_state |= FW_PWR_STATE_RF_OFF;
+	SET_H2CCMD_PWRMODE_PARM_PWR_STATE(u1_h2c_set_pwrmode, power_state);
+
+	RT_PRINT_DATA(rtlpriv, COMP_CMD, DBG_DMESG,
+		      "rtl92c_set_fw_pwrmode(): u1_h2c_set_pwrmode\n",
+		      u1_h2c_set_pwrmode, H2C_8723BE_PWEMODE_LENGTH);
+	rtl8723be_fill_h2c_cmd(hw, H2C_8723BE_SETPWRMODE,
+			       H2C_8723BE_PWEMODE_LENGTH,
+			       u1_h2c_set_pwrmode);
+}
+
+static bool _rtl8723be_cmd_send_packet(struct ieee80211_hw *hw,
+				       struct sk_buff *skb)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	struct rtl8192_tx_ring *ring;
+	struct rtl_tx_desc *pdesc;
+	struct sk_buff *pskb = NULL;
+	u8 own;
+	unsigned long flags;
+
+	ring = &rtlpci->tx_ring[BEACON_QUEUE];
+
+	pskb = __skb_dequeue(&ring->queue);
+	if (pskb)
+		kfree_skb(pskb);
+
+	spin_lock_irqsave(&rtlpriv->locks.irq_th_lock, flags);
+
+	pdesc = &ring->desc[0];
+	own = (u8) rtlpriv->cfg->ops->get_desc((u8 *)pdesc, true, HW_DESC_OWN);
+
+	rtlpriv->cfg->ops->fill_tx_cmddesc(hw, (u8 *)pdesc, 1, 1, skb);
+
+	__skb_queue_tail(&ring->queue, skb);
+
+	spin_unlock_irqrestore(&rtlpriv->locks.irq_th_lock, flags);
+
+	rtlpriv->cfg->ops->tx_polling(hw, BEACON_QUEUE);
+
+	return true;
+}
+#define BEACON_PG		0 /* ->1 */
+#define PSPOLL_PG		2
+#define NULL_PG			3
+#define PROBERSP_PG		4 /* ->5 */
+
+#define TOTAL_RESERVED_PKT_LEN	768
+
+static u8 reserved_page_packet[TOTAL_RESERVED_PKT_LEN] = {
+	/* page 0 beacon */
+	0x80, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF,
+	0xFF, 0xFF, 0x00, 0xE0, 0x4C, 0x02, 0xB1, 0x78,
+	0xEC, 0x1A, 0x59, 0x0B, 0xAD, 0xD4, 0x20, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x64, 0x00, 0x10, 0x04, 0x00, 0x05, 0x54, 0x65,
+	0x73, 0x74, 0x32, 0x01, 0x08, 0x82, 0x84, 0x0B,
+	0x16, 0x24, 0x30, 0x48, 0x6C, 0x03, 0x01, 0x06,
+	0x06, 0x02, 0x00, 0x00, 0x2A, 0x01, 0x02, 0x32,
+	0x04, 0x0C, 0x12, 0x18, 0x60, 0x2D, 0x1A, 0x6C,
+	0x09, 0x03, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x3D, 0x00, 0xDD, 0x07, 0x00, 0xE0, 0x4C,
+	0x02, 0x02, 0x00, 0x00, 0xDD, 0x18, 0x00, 0x50,
+	0xF2, 0x01, 0x01, 0x00, 0x00, 0x50, 0xF2, 0x04,
+	0x01, 0x00, 0x00, 0x50, 0xF2, 0x04, 0x01, 0x00,
+
+	/* page 1 beacon */
+	0x00, 0x50, 0xF2, 0x02, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x10, 0x00, 0x28, 0x8C, 0x00, 0x12, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x81, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+
+	/* page 2  ps-poll */
+	0xA4, 0x10, 0x01, 0xC0, 0xEC, 0x1A, 0x59, 0x0B,
+	0xAD, 0xD4, 0x00, 0xE0, 0x4C, 0x02, 0xB1, 0x78,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x18, 0x00, 0x28, 0x8C, 0x00, 0x12, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+
+	/* page 3  null */
+	0x48, 0x01, 0x00, 0x00, 0xEC, 0x1A, 0x59, 0x0B,
+	0xAD, 0xD4, 0x00, 0xE0, 0x4C, 0x02, 0xB1, 0x78,
+	0xEC, 0x1A, 0x59, 0x0B, 0xAD, 0xD4, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x72, 0x00, 0x28, 0x8C, 0x00, 0x12, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+
+	/* page 4  probe_resp */
+	0x50, 0x00, 0x00, 0x00, 0x00, 0x40, 0x10, 0x10,
+	0x00, 0x03, 0x00, 0xE0, 0x4C, 0x76, 0x00, 0x42,
+	0x00, 0x40, 0x10, 0x10, 0x00, 0x03, 0x00, 0x00,
+	0x9E, 0x46, 0x15, 0x32, 0x27, 0xF2, 0x2D, 0x00,
+	0x64, 0x00, 0x00, 0x04, 0x00, 0x0C, 0x6C, 0x69,
+	0x6E, 0x6B, 0x73, 0x79, 0x73, 0x5F, 0x77, 0x6C,
+	0x61, 0x6E, 0x01, 0x04, 0x82, 0x84, 0x8B, 0x96,
+	0x03, 0x01, 0x01, 0x06, 0x02, 0x00, 0x00, 0x2A,
+	0x01, 0x00, 0x32, 0x08, 0x24, 0x30, 0x48, 0x6C,
+	0x0C, 0x12, 0x18, 0x60, 0x2D, 0x1A, 0x6C, 0x18,
+	0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x3D, 0x00, 0xDD, 0x06, 0x00, 0xE0, 0x4C, 0x02,
+	0x01, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+
+	/* page 5  probe_resp */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+};
+
+void rtl8723be_set_fw_rsvdpagepkt(struct ieee80211_hw *hw,
+				  bool dl_finished)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct sk_buff *skb = NULL;
+
+	u32 totalpacketlen;
+	bool rtstatus;
+	u8 u1rsvdpageloc[5] = { 0 };
+	bool dlok = false;
+
+	u8 *beacon;
+	u8 *p_pspoll;
+	u8 *nullfunc;
+	u8 *p_probersp;
+	/*---------------------------------------------------------
+	 *			(1) beacon
+	 *---------------------------------------------------------
+	 */
+	beacon = &reserved_page_packet[BEACON_PG * 128];
+	SET_80211_HDR_ADDRESS2(beacon, mac->mac_addr);
+	SET_80211_HDR_ADDRESS3(beacon, mac->bssid);
+
+	/*-------------------------------------------------------
+	 *			(2) ps-poll
+	 *-------------------------------------------------------
+	 */
+	p_pspoll = &reserved_page_packet[PSPOLL_PG * 128];
+	SET_80211_PS_POLL_AID(p_pspoll, (mac->assoc_id | 0xc000));
+	SET_80211_PS_POLL_BSSID(p_pspoll, mac->bssid);
+	SET_80211_PS_POLL_TA(p_pspoll, mac->mac_addr);
+
+	SET_H2CCMD_RSVDPAGE_LOC_PSPOLL(u1rsvdpageloc, PSPOLL_PG);
+
+	/*--------------------------------------------------------
+	 *			(3) null data
+	 *--------------------------------------------------------
+	 */
+	nullfunc = &reserved_page_packet[NULL_PG * 128];
+	SET_80211_HDR_ADDRESS1(nullfunc, mac->bssid);
+	SET_80211_HDR_ADDRESS2(nullfunc, mac->mac_addr);
+	SET_80211_HDR_ADDRESS3(nullfunc, mac->bssid);
+
+	SET_H2CCMD_RSVDPAGE_LOC_NULL_DATA(u1rsvdpageloc, NULL_PG);
+
+	/*---------------------------------------------------------
+	 *			(4) probe response
+	 *---------------------------------------------------------
+	 */
+	p_probersp = &reserved_page_packet[PROBERSP_PG * 128];
+	SET_80211_HDR_ADDRESS1(p_probersp, mac->bssid);
+	SET_80211_HDR_ADDRESS2(p_probersp, mac->mac_addr);
+	SET_80211_HDR_ADDRESS3(p_probersp, mac->bssid);
+
+	SET_H2CCMD_RSVDPAGE_LOC_PROBE_RSP(u1rsvdpageloc, PROBERSP_PG);
+
+	totalpacketlen = TOTAL_RESERVED_PKT_LEN;
+
+	RT_PRINT_DATA(rtlpriv, COMP_CMD, DBG_LOUD,
+		      "rtl8723be_set_fw_rsvdpagepkt(): "
+		      "HW_VAR_SET_TX_CMD: ALL\n",
+		      &reserved_page_packet[0], totalpacketlen);
+	RT_PRINT_DATA(rtlpriv, COMP_CMD, DBG_DMESG,
+		      "rtl8723be_set_fw_rsvdpagepkt(): "
+		      "HW_VAR_SET_TX_CMD: ALL\n", u1rsvdpageloc, 3);
+
+
+	skb = dev_alloc_skb(totalpacketlen);
+	memcpy((u8 *)skb_put(skb, totalpacketlen),
+	       &reserved_page_packet, totalpacketlen);
+
+	rtstatus = _rtl8723be_cmd_send_packet(hw, skb);
+
+	if (rtstatus)
+		dlok = true;
+
+	if (dlok) {
+		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+			 "Set RSVD page location to Fw.\n");
+		RT_PRINT_DATA(rtlpriv, COMP_CMD, DBG_DMESG, "H2C_RSVDPAGE:\n",
+			      u1rsvdpageloc, 3);
+		rtl8723be_fill_h2c_cmd(hw, H2C_8723BE_RSVDPAGE,
+				       sizeof(u1rsvdpageloc), u1rsvdpageloc);
+	} else {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+			 "Set RSVD page location to Fw FAIL!!!!!!.\n");
+	}
+}
+
+/*Should check FW support p2p or not.*/
+static void rtl8723be_set_p2p_ctw_period_cmd(struct ieee80211_hw *hw,
+					     u8 ctwindow)
+{
+	u8 u1_ctwindow_period[1] = {ctwindow};
+
+	rtl8723be_fill_h2c_cmd(hw, H2C_8723BE_P2P_PS_CTW_CMD, 1,
+			       u1_ctwindow_period);
+}
+
+void rtl8723be_set_p2p_ps_offload_cmd(struct ieee80211_hw *hw,
+				      u8 p2p_ps_state)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_ps_ctl *rtlps = rtl_psc(rtl_priv(hw));
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rtl_p2p_ps_info *p2pinfo = &(rtlps->p2p_ps_info);
+	struct p2p_ps_offload_t *p2p_ps_offload = &rtlhal->p2p_ps_offload;
+	u8 i;
+	u16 ctwindow;
+	u32 start_time, tsf_low;
+
+	switch (p2p_ps_state) {
+	case P2P_PS_DISABLE:
+		RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD, "P2P_PS_DISABLE\n");
+		memset(p2p_ps_offload, 0, sizeof(struct p2p_ps_offload_t));
+		break;
+	case P2P_PS_ENABLE:
+		RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD, "P2P_PS_ENABLE\n");
+		/* update CTWindow value. */
+		if (p2pinfo->ctwindow > 0) {
+			p2p_ps_offload->ctwindow_en = 1;
+			ctwindow = p2pinfo->ctwindow;
+			rtl8723be_set_p2p_ctw_period_cmd(hw, ctwindow);
+		}
+		/* hw only support 2 set of NoA */
+		for (i = 0; i < p2pinfo->noa_num; i++) {
+			/* To control the register setting
+			 * for which NOA
+			 */
+			rtl_write_byte(rtlpriv, 0x5cf, (i << 4));
+			if (i == 0)
+				p2p_ps_offload->noa0_en = 1;
+			else
+				p2p_ps_offload->noa1_en = 1;
+
+			/* config P2P NoA Descriptor Register */
+			rtl_write_dword(rtlpriv, 0x5E0,
+					p2pinfo->noa_duration[i]);
+			rtl_write_dword(rtlpriv, 0x5E4,
+					p2pinfo->noa_interval[i]);
+
+			/*Get Current TSF value */
+			tsf_low = rtl_read_dword(rtlpriv, REG_TSFTR);
+
+			start_time = p2pinfo->noa_start_time[i];
+			if (p2pinfo->noa_count_type[i] != 1) {
+				while (start_time <= (tsf_low + (50 * 1024))) {
+					start_time += p2pinfo->noa_interval[i];
+					if (p2pinfo->noa_count_type[i] != 255)
+						p2pinfo->noa_count_type[i]--;
+				}
+			}
+			rtl_write_dword(rtlpriv, 0x5E8, start_time);
+			rtl_write_dword(rtlpriv, 0x5EC,
+					p2pinfo->noa_count_type[i]);
+		}
+		if ((p2pinfo->opp_ps == 1) ||
+		    (p2pinfo->noa_num > 0)) {
+			/* rst p2p circuit */
+			rtl_write_byte(rtlpriv, REG_DUAL_TSF_RST, BIT(4));
+
+			p2p_ps_offload->offload_en = 1;
+
+			if (P2P_ROLE_GO == rtlpriv->mac80211.p2p) {
+				p2p_ps_offload->role = 1;
+				p2p_ps_offload->allstasleep = 0;
+			} else {
+				p2p_ps_offload->role = 0;
+			}
+			p2p_ps_offload->discovery = 0;
+		}
+		break;
+	case P2P_PS_SCAN:
+		RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD, "P2P_PS_SCAN\n");
+		p2p_ps_offload->discovery = 1;
+		break;
+	case P2P_PS_SCAN_DONE:
+		RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD, "P2P_PS_SCAN_DONE\n");
+		p2p_ps_offload->discovery = 0;
+		p2pinfo->p2p_ps_state = P2P_PS_ENABLE;
+		break;
+	default:
+		break;
+	}
+	rtl8723be_fill_h2c_cmd(hw, H2C_8723BE_P2P_PS_OFFLOAD, 1,
+			       (u8 *)p2p_ps_offload);
+}
+
+void rtl8723be_set_fw_joinbss_report_cmd(struct ieee80211_hw *hw, u8 mstatus)
+{
+	u8 u1_joinbssrpt_parm[1] = { 0 };
+
+	SET_H2CCMD_JOINBSSRPT_PARM_OPMODE(u1_joinbssrpt_parm, mstatus);
+
+	rtl8723be_fill_h2c_cmd(hw, H2C_8723BE_JOINBSSRPT, 1,
+			       u1_joinbssrpt_parm);
+}
+
+void rtl8723be_set_fw_ap_off_load_cmd(struct ieee80211_hw *hw,
+				      u8 ap_offload_enable)
+{
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	u8 u1_apoffload_parm[H2C_8723BE_AP_OFFLOAD_LENGTH] = { 0 };
+
+	SET_H2CCMD_AP_OFFLOAD_ON(u1_apoffload_parm, ap_offload_enable);
+	SET_H2CCMD_AP_OFFLOAD_HIDDEN(u1_apoffload_parm, mac->hiddenssid);
+	SET_H2CCMD_AP_OFFLOAD_DENYANY(u1_apoffload_parm, 0);
+
+	rtl8723be_fill_h2c_cmd(hw, H2C_8723BE_AP_OFFLOAD,
+			       H2C_8723BE_AP_OFFLOAD_LENGTH, u1_apoffload_parm);
+}
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/fw.h b/drivers/net/wireless/rtlwifi/rtl8723be/fw.h
new file mode 100644
index 000000000000..31eec281e446
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/fw.h
@@ -0,0 +1,248 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2014  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __RTL8723BE__FW__H__
+#define __RTL8723BE__FW__H__
+
+#define FW_8192C_SIZE				0x8000
+#define FW_8192C_START_ADDRESS			0x1000
+#define FW_8192C_END_ADDRESS			0x5FFF
+#define FW_8192C_PAGE_SIZE			4096
+#define FW_8192C_POLLING_DELAY			5
+#define FW_8192C_POLLING_TIMEOUT_COUNT		6000
+
+#define IS_FW_HEADER_EXIST(_pfwhdr)	\
+	((_pfwhdr->signature&0xFFF0) == 0x5300)
+#define USE_OLD_WOWLAN_DEBUG_FW			0
+
+#define H2C_8723BE_RSVDPAGE_LOC_LEN		5
+#define H2C_8723BE_PWEMODE_LENGTH		5
+#define H2C_8723BE_JOINBSSRPT_LENGTH		1
+#define H2C_8723BE_AP_OFFLOAD_LENGTH		3
+#define H2C_8723BE_WOWLAN_LENGTH		3
+#define H2C_8723BE_KEEP_ALIVE_CTRL_LENGTH	3
+#if (USE_OLD_WOWLAN_DEBUG_FW == 0)
+#define H2C_8723BE_REMOTE_WAKE_CTRL_LEN		1
+#else
+#define H2C_8723BE_REMOTE_WAKE_CTRL_LEN		3
+#endif
+#define H2C_8723BE_AOAC_GLOBAL_INFO_LEN		2
+#define H2C_8723BE_AOAC_RSVDPAGE_LOC_LEN	7
+
+
+/* Fw PS state for RPWM.
+*BIT[2:0] = HW state
+*BIT[3] = Protocol PS state, 1: register active state , 0: register sleep state
+*BIT[4] = sub-state
+*/
+#define	FW_PS_GO_ON		BIT(0)
+#define	FW_PS_TX_NULL		BIT(1)
+#define	FW_PS_RF_ON		BIT(2)
+#define	FW_PS_REGISTER_ACTIVE	BIT(3)
+
+#define	FW_PS_DPS		BIT(0)
+#define	FW_PS_LCLK		(FW_PS_DPS)
+#define	FW_PS_RF_OFF		BIT(1)
+#define	FW_PS_ALL_ON		BIT(2)
+#define	FW_PS_ST_ACTIVE	BIT(3)
+#define	FW_PS_ISR_ENABLE	BIT(4)
+#define	FW_PS_IMR_ENABLE	BIT(5)
+
+
+#define	FW_PS_ACK		BIT(6)
+#define	FW_PS_TOGGLE		BIT(7)
+
+ /* 88E RPWM value*/
+ /* BIT[0] = 1: 32k, 0: 40M*/
+#define	FW_PS_CLOCK_OFF		BIT(0)		/* 32k*/
+#define	FW_PS_CLOCK_ON		0		/*40M*/
+
+#define	FW_PS_STATE_MASK	(0x0F)
+#define	FW_PS_STATE_HW_MASK	(0x07)
+/*ISR_ENABLE, IMR_ENABLE, and PS mode should be inherited.*/
+#define	FW_PS_STATE_INT_MASK	(0x3F)
+
+#define	FW_PS_STATE(x)	(FW_PS_STATE_MASK & (x))
+#define	FW_PS_STATE_HW(x)	(FW_PS_STATE_HW_MASK & (x))
+#define	FW_PS_STATE_INT(x)	(FW_PS_STATE_INT_MASK & (x))
+#define	FW_PS_ISR_VAL(x)	((x) & 0x70)
+#define	FW_PS_IMR_MASK(x)	((x) & 0xDF)
+#define	FW_PS_KEEP_IMR(x)	((x) & 0x20)
+
+
+#define	FW_PS_STATE_S0		(FW_PS_DPS)
+#define	FW_PS_STATE_S1		(FW_PS_LCLK)
+#define	FW_PS_STATE_S2		(FW_PS_RF_OFF)
+#define	FW_PS_STATE_S3		(FW_PS_ALL_ON)
+#define	FW_PS_STATE_S4		((FW_PS_ST_ACTIVE) | (FW_PS_ALL_ON))
+
+/* ((FW_PS_RF_ON) | (FW_PS_REGISTER_ACTIVE))*/
+#define	FW_PS_STATE_ALL_ON_88E	(FW_PS_CLOCK_ON)
+/* (FW_PS_RF_ON)*/
+#define	FW_PS_STATE_RF_ON_88E	(FW_PS_CLOCK_ON)
+/* 0x0*/
+#define	FW_PS_STATE_RF_OFF_88E	(FW_PS_CLOCK_ON)
+/* (FW_PS_STATE_RF_OFF)*/
+#define	FW_PS_STATE_RF_OFF_LOW_PWR_88E	(FW_PS_CLOCK_OFF)
+
+#define	FW_PS_STATE_ALL_ON_92C	(FW_PS_STATE_S4)
+#define	FW_PS_STATE_RF_ON_92C		(FW_PS_STATE_S3)
+#define	FW_PS_STATE_RF_OFF_92C	(FW_PS_STATE_S2)
+#define	FW_PS_STATE_RF_OFF_LOW_PWR_92C	(FW_PS_STATE_S1)
+
+
+/* For 88E H2C PwrMode Cmd ID 5.*/
+#define	FW_PWR_STATE_ACTIVE	((FW_PS_RF_ON) | (FW_PS_REGISTER_ACTIVE))
+#define	FW_PWR_STATE_RF_OFF	0
+
+#define	FW_PS_IS_ACK(x)	((x) & FW_PS_ACK)
+#define	FW_PS_IS_CLK_ON(x)	((x) & (FW_PS_RF_OFF | FW_PS_ALL_ON))
+#define	FW_PS_IS_RF_ON(x)	((x) & (FW_PS_ALL_ON))
+#define	FW_PS_IS_ACTIVE(x)	((x) & (FW_PS_ST_ACTIVE))
+#define	FW_PS_IS_CPWM_INT(x)	((x) & 0x40)
+
+#define	FW_CLR_PS_STATE(x)	((x) = ((x) & (0xF0)))
+
+#define	IS_IN_LOW_POWER_STATE_88E(fwpsstate)		\
+			(FW_PS_STATE(fwpsstate) == FW_PS_CLOCK_OFF)
+
+#define	FW_PWR_STATE_ACTIVE	((FW_PS_RF_ON) | (FW_PS_REGISTER_ACTIVE))
+#define	FW_PWR_STATE_RF_OFF	0
+
+#define pagenum_128(_len)	(u32)(((_len)>>7) + ((_len)&0x7F ? 1 : 0))
+
+#define SET_88E_H2CCMD_WOWLAN_FUNC_ENABLE(__ph2ccmd, __val)		\
+	SET_BITS_TO_LE_1BYTE(__ph2ccmd, 0, 1, __val)
+#define SET_88E_H2CCMD_WOWLAN_PATTERN_MATCH_ENABLE(__ph2ccmd, __val)	\
+	SET_BITS_TO_LE_1BYTE(__ph2ccmd, 1, 1, __val)
+#define SET_88E_H2CCMD_WOWLAN_MAGIC_PKT_ENABLE(__ph2ccmd, __val)	\
+	SET_BITS_TO_LE_1BYTE(__ph2ccmd, 2, 1, __val)
+#define SET_88E_H2CCMD_WOWLAN_UNICAST_PKT_ENABLE(__ph2ccmd, __val)	\
+	SET_BITS_TO_LE_1BYTE(__ph2ccmd, 3, 1, __val)
+#define SET_88E_H2CCMD_WOWLAN_ALL_PKT_DROP(__ph2ccmd, __val)		\
+	SET_BITS_TO_LE_1BYTE(__ph2ccmd, 4, 1, __val)
+#define SET_88E_H2CCMD_WOWLAN_GPIO_ACTIVE(__ph2ccmd, __val)		\
+	SET_BITS_TO_LE_1BYTE(__ph2ccmd, 5, 1, __val)
+#define SET_88E_H2CCMD_WOWLAN_REKEY_WAKE_UP(__ph2ccmd, __val)		\
+	SET_BITS_TO_LE_1BYTE(__ph2ccmd, 6, 1, __val)
+#define SET_88E_H2CCMD_WOWLAN_DISCONNECT_WAKE_UP(__ph2ccmd, __val)	\
+	SET_BITS_TO_LE_1BYTE(__ph2ccmd, 7, 1, __val)
+#define SET_88E_H2CCMD_WOWLAN_GPIONUM(__ph2ccmd, __val)			\
+	SET_BITS_TO_LE_1BYTE((__ph2ccmd)+1, 0, 8, __val)
+#define SET_88E_H2CCMD_WOWLAN_GPIO_DURATION(__ph2ccmd, __val)		\
+	SET_BITS_TO_LE_1BYTE((__ph2ccmd)+2, 0, 8, __val)
+
+
+#define SET_H2CCMD_PWRMODE_PARM_MODE(__ph2ccmd, __val)			\
+	SET_BITS_TO_LE_1BYTE(__ph2ccmd, 0, 8, __val)
+#define SET_H2CCMD_PWRMODE_PARM_RLBM(__ph2ccmd, __val)			\
+	SET_BITS_TO_LE_1BYTE((__ph2ccmd)+1, 0, 4, __val)
+#define SET_H2CCMD_PWRMODE_PARM_SMART_PS(__ph2ccmd, __val)		\
+	SET_BITS_TO_LE_1BYTE((__ph2ccmd)+1, 4, 4, __val)
+#define SET_H2CCMD_PWRMODE_PARM_AWAKE_INTERVAL(__ph2ccmd, __val)	\
+	SET_BITS_TO_LE_1BYTE((__ph2ccmd)+2, 0, 8, __val)
+#define SET_H2CCMD_PWRMODE_PARM_ALL_QUEUE_UAPSD(__ph2ccmd, __val)	\
+	SET_BITS_TO_LE_1BYTE((__ph2ccmd)+3, 0, 8, __val)
+#define SET_H2CCMD_PWRMODE_PARM_PWR_STATE(__ph2ccmd, __val)		\
+	SET_BITS_TO_LE_1BYTE((__ph2ccmd)+4, 0, 8, __val)
+#define GET_88E_H2CCMD_PWRMODE_PARM_MODE(__ph2ccmd)			\
+	LE_BITS_TO_1BYTE(__ph2ccmd, 0, 8)
+
+#define SET_H2CCMD_JOINBSSRPT_PARM_OPMODE(__ph2ccmd, __val)		\
+	SET_BITS_TO_LE_1BYTE(__ph2ccmd, 0, 8, __val)
+#define SET_H2CCMD_RSVDPAGE_LOC_PROBE_RSP(__ph2ccmd, __val)		\
+	SET_BITS_TO_LE_1BYTE(__ph2ccmd, 0, 8, __val)
+#define SET_H2CCMD_RSVDPAGE_LOC_PSPOLL(__ph2ccmd, __val)		\
+	SET_BITS_TO_LE_1BYTE((__ph2ccmd)+1, 0, 8, __val)
+#define SET_H2CCMD_RSVDPAGE_LOC_NULL_DATA(__ph2ccmd, __val)		\
+	SET_BITS_TO_LE_1BYTE((__ph2ccmd)+2, 0, 8, __val)
+
+/* AP_OFFLOAD */
+#define SET_H2CCMD_AP_OFFLOAD_ON(__ph2ccmd, __val)			\
+	SET_BITS_TO_LE_1BYTE(__ph2ccmd, 0, 8, __val)
+#define SET_H2CCMD_AP_OFFLOAD_HIDDEN(__ph2ccmd, __val)			\
+	SET_BITS_TO_LE_1BYTE((__ph2ccmd)+1, 0, 8, __val)
+#define SET_H2CCMD_AP_OFFLOAD_DENYANY(__ph2ccmd, __val)			\
+	SET_BITS_TO_LE_1BYTE((__ph2ccmd)+2, 0, 8, __val)
+#define SET_H2CCMD_AP_OFFLOAD_WAKEUP_EVT_RPT(__ph2ccmd, __val)		\
+	SET_BITS_TO_LE_1BYTE((__ph2ccmd)+3, 0, 8, __val)
+
+/* Keep Alive Control*/
+#define SET_88E_H2CCMD_KEEP_ALIVE_ENABLE(__ph2ccmd, __val)		\
+	SET_BITS_TO_LE_1BYTE(__ph2ccmd, 0, 1, __val)
+#define SET_88E_H2CCMD_KEEP_ALIVE_ACCPEPT_USER_DEFINED(__ph2ccmd, __val)\
+	SET_BITS_TO_LE_1BYTE(__ph2ccmd, 1, 1, __val)
+#define SET_88E_H2CCMD_KEEP_ALIVE_PERIOD(__ph2ccmd, __val)		\
+	SET_BITS_TO_LE_1BYTE((__ph2ccmd)+1, 0, 8, __val)
+
+/*REMOTE_WAKE_CTRL */
+#define SET_88E_H2CCMD_REMOTE_WAKE_CTRL_EN(__ph2ccmd, __val)		\
+	SET_BITS_TO_LE_1BYTE(__ph2ccmd, 0, 1, __val)
+#if (USE_OLD_WOWLAN_DEBUG_FW == 0)
+#define SET_88E_H2CCMD_REMOTE_WAKE_CTRL_ARP_OFFLOAD_EN(__ph2ccmd, __val)\
+	SET_BITS_TO_LE_1BYTE(__ph2ccmd, 1, 1, __val)
+#define SET_88E_H2CCMD_REMOTE_WAKE_CTRL_NDP_OFFLOAD_EN(__ph2ccmd, __val)\
+	SET_BITS_TO_LE_1BYTE(__ph2ccmd, 2, 1, __val)
+#define SET_88E_H2CCMD_REMOTE_WAKE_CTRL_GTK_OFFLOAD_EN(__ph2ccmd, __val)\
+	SET_BITS_TO_LE_1BYTE(__ph2ccmd, 3, 1, __val)
+#else
+#define SET_88E_H2CCMD_REMOTE_WAKE_CTRL_PAIRWISE_ENC_ALG(__ph2ccmd, __val)\
+	SET_BITS_TO_LE_1BYTE((__ph2ccmd)+1, 0, 8, __val)
+#define SET_88E_H2CCMD_REMOTE_WAKE_CTRL_GROUP_ENC_ALG(__ph2ccmd, __val)	\
+	SET_BITS_TO_LE_1BYTE((__ph2ccmd)+2, 0, 8, __val)
+#endif
+
+/* GTK_OFFLOAD */
+#define SET_88E_H2CCMD_AOAC_GLOBAL_INFO_PAIRWISE_ENC_ALG(__ph2ccmd, __val)\
+	SET_BITS_TO_LE_1BYTE(__ph2ccmd, 0, 8, __val)
+#define SET_88E_H2CCMD_AOAC_GLOBAL_INFO_GROUP_ENC_ALG(__ph2ccmd, __val)	\
+	SET_BITS_TO_LE_1BYTE((__ph2ccmd)+1, 0, 8, __val)
+
+/* AOAC_RSVDPAGE_LOC */
+#define SET_88E_H2CCMD_AOAC_RSVDPAGE_LOC_REM_WAKE_CTRL_INFO(__ph2ccmd, __val)\
+	SET_BITS_TO_LE_1BYTE((__ph2ccmd), 0, 8, __val)
+#define SET_88E_H2CCMD_AOAC_RSVDPAGE_LOC_ARP_RSP(__ph2ccmd, __val)	\
+	SET_BITS_TO_LE_1BYTE((__ph2ccmd)+1, 0, 8, __val)
+#define SET_88E_H2CCMD_AOAC_RSVDPAGE_LOC_NEIGHBOR_ADV(__ph2ccmd, __val)	\
+	SET_BITS_TO_LE_1BYTE((__ph2ccmd)+2, 0, 8, __val)
+#define SET_88E_H2CCMD_AOAC_RSVDPAGE_LOC_GTK_RSP(__ph2ccmd, __val)	\
+	SET_BITS_TO_LE_1BYTE((__ph2ccmd)+3, 0, 8, __val)
+#define SET_88E_H2CCMD_AOAC_RSVDPAGE_LOC_GTK_INFO(__ph2ccmd, __val)	\
+	SET_BITS_TO_LE_1BYTE((__ph2ccmd)+4, 0, 8, __val)
+
+void rtl8723be_set_fw_pwrmode_cmd(struct ieee80211_hw *hw, u8 mode);
+void rtl8723be_set_fw_ap_off_load_cmd(struct ieee80211_hw *hw,
+				      u8 ap_offload_enable);
+void rtl8723be_fill_h2c_cmd(struct ieee80211_hw *hw, u8 element_id,
+			    u32 cmd_len, u8 *p_cmdbuffer);
+void rtl8723be_firmware_selfreset(struct ieee80211_hw *hw);
+void rtl8723be_set_fw_rsvdpagepkt(struct ieee80211_hw *hw,
+				  bool dl_finished);
+void rtl8723be_set_fw_joinbss_report_cmd(struct ieee80211_hw *hw, u8 mstatus);
+int rtl8723be_download_fw(struct ieee80211_hw *hw,
+			  bool buse_wake_on_wlan_fw);
+void rtl8723be_set_p2p_ps_offload_cmd(struct ieee80211_hw *hw,
+				      u8 p2p_ps_state);
+
+#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/hw.c b/drivers/net/wireless/rtlwifi/rtl8723be/hw.c
new file mode 100644
index 000000000000..a500d266fae5
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/hw.c
@@ -0,0 +1,2529 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2014  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "../efuse.h"
+#include "../base.h"
+#include "../regd.h"
+#include "../cam.h"
+#include "../ps.h"
+#include "../pci.h"
+#include "reg.h"
+#include "def.h"
+#include "phy.h"
+#include "dm.h"
+#include "../rtl8723com/dm_common.h"
+#include "fw.h"
+#include "../rtl8723com/fw_common.h"
+#include "led.h"
+#include "hw.h"
+#include "pwrseqcmd.h"
+#include "pwrseq.h"
+#include "../btcoexist/rtl_btc.h"
+
+#define LLT_CONFIG	5
+
+static void _rtl8723be_return_beacon_queue_skb(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	struct rtl8192_tx_ring *ring = &rtlpci->tx_ring[BEACON_QUEUE];
+
+	while (skb_queue_len(&ring->queue)) {
+		struct rtl_tx_desc *entry = &ring->desc[ring->idx];
+		struct sk_buff *skb = __skb_dequeue(&ring->queue);
+
+		pci_unmap_single(rtlpci->pdev,
+				 rtlpriv->cfg->ops->get_desc(
+				 (u8 *)entry, true, HW_DESC_TXBUFF_ADDR),
+				 skb->len, PCI_DMA_TODEVICE);
+		kfree_skb(skb);
+		ring->idx = (ring->idx + 1) % ring->entries;
+	}
+}
+
+static void _rtl8723be_set_bcn_ctrl_reg(struct ieee80211_hw *hw,
+					u8 set_bits, u8 clear_bits)
+{
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	rtlpci->reg_bcn_ctrl_val |= set_bits;
+	rtlpci->reg_bcn_ctrl_val &= ~clear_bits;
+
+	rtl_write_byte(rtlpriv, REG_BCN_CTRL, (u8) rtlpci->reg_bcn_ctrl_val);
+}
+
+static void _rtl8723be_stop_tx_beacon(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8 tmp1byte;
+
+	tmp1byte = rtl_read_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2);
+	rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2, tmp1byte & (~BIT(6)));
+	rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 1, 0x64);
+	tmp1byte = rtl_read_byte(rtlpriv, REG_TBTT_PROHIBIT + 2);
+	tmp1byte &= ~(BIT(0));
+	rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 2, tmp1byte);
+}
+
+static void _rtl8723be_resume_tx_beacon(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8 tmp1byte;
+
+	tmp1byte = rtl_read_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2);
+	rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2, tmp1byte | BIT(6));
+	rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 1, 0xff);
+	tmp1byte = rtl_read_byte(rtlpriv, REG_TBTT_PROHIBIT + 2);
+	tmp1byte |= BIT(1);
+	rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 2, tmp1byte);
+}
+
+static void _rtl8723be_enable_bcn_sub_func(struct ieee80211_hw *hw)
+{
+	_rtl8723be_set_bcn_ctrl_reg(hw, 0, BIT(1));
+}
+
+static void _rtl8723be_disable_bcn_sub_func(struct ieee80211_hw *hw)
+{
+	_rtl8723be_set_bcn_ctrl_reg(hw, BIT(1), 0);
+}
+
+static void _rtl8723be_set_fw_clock_on(struct ieee80211_hw *hw, u8 rpwm_val,
+				       bool need_turn_off_ckk)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	bool support_remote_wake_up;
+	u32 count = 0, isr_regaddr, content;
+	bool schedule_timer = need_turn_off_ckk;
+	rtlpriv->cfg->ops->get_hw_reg(hw, HAL_DEF_WOWLAN,
+				      (u8 *)(&support_remote_wake_up));
+
+	if (!rtlhal->fw_ready)
+		return;
+	if (!rtlpriv->psc.fw_current_inpsmode)
+		return;
+
+	while (1) {
+		spin_lock_bh(&rtlpriv->locks.fw_ps_lock);
+		if (rtlhal->fw_clk_change_in_progress) {
+			while (rtlhal->fw_clk_change_in_progress) {
+				spin_unlock_bh(&rtlpriv->locks.fw_ps_lock);
+				count++;
+				udelay(100);
+				if (count > 1000)
+					return;
+				spin_lock_bh(&rtlpriv->locks.fw_ps_lock);
+			}
+			spin_unlock_bh(&rtlpriv->locks.fw_ps_lock);
+		} else {
+			rtlhal->fw_clk_change_in_progress = false;
+			spin_unlock_bh(&rtlpriv->locks.fw_ps_lock);
+			break;
+		}
+	}
+	if (IS_IN_LOW_POWER_STATE_88E(rtlhal->fw_ps_state)) {
+		rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_SET_RPWM,
+					      (u8 *)(&rpwm_val));
+		if (FW_PS_IS_ACK(rpwm_val)) {
+			isr_regaddr = REG_HISR;
+			content = rtl_read_dword(rtlpriv, isr_regaddr);
+			while (!(content & IMR_CPWM) && (count < 500)) {
+				udelay(50);
+				count++;
+				content = rtl_read_dword(rtlpriv, isr_regaddr);
+			}
+
+			if (content & IMR_CPWM) {
+				rtl_write_word(rtlpriv, isr_regaddr, 0x0100);
+				rtlhal->fw_ps_state = FW_PS_STATE_RF_ON_88E;
+				RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+					 "Receive CPWM INT!!! Set "
+					 "pHalData->FwPSState = %X\n",
+					 rtlhal->fw_ps_state);
+			}
+		}
+		spin_lock_bh(&rtlpriv->locks.fw_ps_lock);
+		rtlhal->fw_clk_change_in_progress = false;
+		spin_unlock_bh(&rtlpriv->locks.fw_ps_lock);
+		if (schedule_timer) {
+			mod_timer(&rtlpriv->works.fw_clockoff_timer,
+				  jiffies + MSECS(10));
+		}
+	} else  {
+		spin_lock_bh(&rtlpriv->locks.fw_ps_lock);
+		rtlhal->fw_clk_change_in_progress = false;
+		spin_unlock_bh(&rtlpriv->locks.fw_ps_lock);
+	}
+}
+
+static void _rtl8723be_set_fw_clock_off(struct ieee80211_hw *hw, u8 rpwm_val)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	struct rtl8192_tx_ring *ring;
+	enum rf_pwrstate rtstate;
+	bool schedule_timer = false;
+	u8 queue;
+
+	if (!rtlhal->fw_ready)
+		return;
+	if (!rtlpriv->psc.fw_current_inpsmode)
+		return;
+	if (!rtlhal->allow_sw_to_change_hwclc)
+		return;
+	rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_RF_STATE, (u8 *)(&rtstate));
+	if (rtstate == ERFOFF || rtlpriv->psc.inactive_pwrstate == ERFOFF)
+		return;
+
+	for (queue = 0; queue < RTL_PCI_MAX_TX_QUEUE_COUNT; queue++) {
+		ring = &rtlpci->tx_ring[queue];
+		if (skb_queue_len(&ring->queue)) {
+			schedule_timer = true;
+			break;
+		}
+	}
+	if (schedule_timer) {
+		mod_timer(&rtlpriv->works.fw_clockoff_timer,
+			  jiffies + MSECS(10));
+		return;
+	}
+	if (FW_PS_STATE(rtlhal->fw_ps_state) !=
+	    FW_PS_STATE_RF_OFF_LOW_PWR_88E) {
+		spin_lock_bh(&rtlpriv->locks.fw_ps_lock);
+		if (!rtlhal->fw_clk_change_in_progress) {
+			rtlhal->fw_clk_change_in_progress = true;
+			spin_unlock_bh(&rtlpriv->locks.fw_ps_lock);
+			rtlhal->fw_ps_state = FW_PS_STATE(rpwm_val);
+			rtl_write_word(rtlpriv, REG_HISR, 0x0100);
+			rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SET_RPWM,
+						      (u8 *)(&rpwm_val));
+			spin_lock_bh(&rtlpriv->locks.fw_ps_lock);
+			rtlhal->fw_clk_change_in_progress = false;
+			spin_unlock_bh(&rtlpriv->locks.fw_ps_lock);
+		} else {
+			spin_unlock_bh(&rtlpriv->locks.fw_ps_lock);
+			mod_timer(&rtlpriv->works.fw_clockoff_timer,
+				  jiffies + MSECS(10));
+		}
+	}
+}
+
+static void _rtl8723be_set_fw_ps_rf_on(struct ieee80211_hw *hw)
+{
+	u8 rpwm_val = 0;
+	rpwm_val |= (FW_PS_STATE_RF_OFF_88E | FW_PS_ACK);
+	_rtl8723be_set_fw_clock_on(hw, rpwm_val, true);
+}
+
+static void _rtl8723be_fwlps_leave(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	bool fw_current_inps = false;
+	u8 rpwm_val = 0, fw_pwrmode = FW_PS_ACTIVE_MODE;
+
+	if (ppsc->low_power_enable) {
+		rpwm_val = (FW_PS_STATE_ALL_ON_88E | FW_PS_ACK);/* RF on */
+		_rtl8723be_set_fw_clock_on(hw, rpwm_val, false);
+		rtlhal->allow_sw_to_change_hwclc = false;
+		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_H2C_FW_PWRMODE,
+					      (u8 *)(&fw_pwrmode));
+		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_FW_PSMODE_STATUS,
+					      (u8 *)(&fw_current_inps));
+	} else {
+		rpwm_val = FW_PS_STATE_ALL_ON_88E;	/* RF on */
+		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SET_RPWM,
+					      (u8 *)(&rpwm_val));
+		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_H2C_FW_PWRMODE,
+					      (u8 *)(&fw_pwrmode));
+		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_FW_PSMODE_STATUS,
+					      (u8 *)(&fw_current_inps));
+	}
+}
+
+static void _rtl8723be_fwlps_enter(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	bool fw_current_inps = true;
+	u8 rpwm_val;
+
+	if (ppsc->low_power_enable) {
+		rpwm_val = FW_PS_STATE_RF_OFF_LOW_PWR_88E;	/* RF off */
+		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_FW_PSMODE_STATUS,
+					      (u8 *)(&fw_current_inps));
+		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_H2C_FW_PWRMODE,
+					      (u8 *)(&ppsc->fwctrl_psmode));
+		rtlhal->allow_sw_to_change_hwclc = true;
+		_rtl8723be_set_fw_clock_off(hw, rpwm_val);
+
+	} else {
+		rpwm_val = FW_PS_STATE_RF_OFF_88E;	/* RF off */
+		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_FW_PSMODE_STATUS,
+					      (u8 *)(&fw_current_inps));
+		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_H2C_FW_PWRMODE,
+					      (u8 *)(&ppsc->fwctrl_psmode));
+		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SET_RPWM,
+					      (u8 *)(&rpwm_val));
+	}
+}
+
+void rtl8723be_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+
+	switch (variable) {
+	case HW_VAR_RCR:
+		*((u32 *)(val)) = rtlpci->receive_config;
+		break;
+	case HW_VAR_RF_STATE:
+		*((enum rf_pwrstate *)(val)) = ppsc->rfpwr_state;
+		break;
+	case HW_VAR_FWLPS_RF_ON: {
+		enum rf_pwrstate rfstate;
+		u32 val_rcr;
+
+		rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_RF_STATE,
+					      (u8 *)(&rfstate));
+		if (rfstate == ERFOFF) {
+			*((bool *)(val)) = true;
+		} else {
+			val_rcr = rtl_read_dword(rtlpriv, REG_RCR);
+			val_rcr &= 0x00070000;
+			if (val_rcr)
+				*((bool *)(val)) = false;
+			else
+				*((bool *)(val)) = true;
+		}
+		break; }
+	case HW_VAR_FW_PSMODE_STATUS:
+		*((bool *)(val)) = ppsc->fw_current_inpsmode;
+		break;
+	case HW_VAR_CORRECT_TSF: {
+		u64 tsf;
+		u32 *ptsf_low = (u32 *)&tsf;
+		u32 *ptsf_high = ((u32 *)&tsf) + 1;
+
+		*ptsf_high = rtl_read_dword(rtlpriv, (REG_TSFTR + 4));
+		*ptsf_low = rtl_read_dword(rtlpriv, REG_TSFTR);
+
+		*((u64 *)(val)) = tsf;
+
+		break; }
+	default:
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 "switch case not process %x\n", variable);
+		break;
+	}
+}
+
+void rtl8723be_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	u8 idx;
+
+	switch (variable) {
+	case HW_VAR_ETHER_ADDR:
+		for (idx = 0; idx < ETH_ALEN; idx++)
+			rtl_write_byte(rtlpriv, (REG_MACID + idx), val[idx]);
+		break;
+	case HW_VAR_BASIC_RATE: {
+		u16 rate_cfg = ((u16 *)val)[0];
+		u8 rate_index = 0;
+		rate_cfg = rate_cfg & 0x15f;
+		rate_cfg |= 0x01;
+		rtl_write_byte(rtlpriv, REG_RRSR, rate_cfg & 0xff);
+		rtl_write_byte(rtlpriv, REG_RRSR + 1, (rate_cfg >> 8) & 0xff);
+		while (rate_cfg > 0x1) {
+			rate_cfg = (rate_cfg >> 1);
+			rate_index++;
+		}
+		rtl_write_byte(rtlpriv, REG_INIRTS_RATE_SEL, rate_index);
+		break; }
+	case HW_VAR_BSSID:
+		for (idx = 0; idx < ETH_ALEN; idx++)
+			rtl_write_byte(rtlpriv, (REG_BSSID + idx), val[idx]);
+		break;
+	case HW_VAR_SIFS:
+		rtl_write_byte(rtlpriv, REG_SIFS_CTX + 1, val[0]);
+		rtl_write_byte(rtlpriv, REG_SIFS_TRX + 1, val[1]);
+
+		rtl_write_byte(rtlpriv, REG_SPEC_SIFS + 1, val[0]);
+		rtl_write_byte(rtlpriv, REG_MAC_SPEC_SIFS + 1, val[0]);
+
+		if (!mac->ht_enable)
+			rtl_write_word(rtlpriv, REG_RESP_SIFS_OFDM, 0x0e0e);
+		else
+			rtl_write_word(rtlpriv, REG_RESP_SIFS_OFDM,
+				       *((u16 *)val));
+		break;
+	case HW_VAR_SLOT_TIME: {
+		u8 e_aci;
+
+		RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
+			 "HW_VAR_SLOT_TIME %x\n", val[0]);
+
+		rtl_write_byte(rtlpriv, REG_SLOT, val[0]);
+
+		for (e_aci = 0; e_aci < AC_MAX; e_aci++) {
+			rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_AC_PARAM,
+						      (u8 *)(&e_aci));
+		}
+		break; }
+	case HW_VAR_ACK_PREAMBLE: {
+		u8 reg_tmp;
+		u8 short_preamble = (bool) (*(u8 *)val);
+		reg_tmp = rtl_read_byte(rtlpriv, REG_TRXPTCL_CTL + 2);
+		if (short_preamble) {
+			reg_tmp |= 0x02;
+			rtl_write_byte(rtlpriv, REG_TRXPTCL_CTL + 2, reg_tmp);
+		} else {
+			reg_tmp &= 0xFD;
+			rtl_write_byte(rtlpriv, REG_TRXPTCL_CTL + 2, reg_tmp);
+		}
+		break; }
+	case HW_VAR_WPA_CONFIG:
+		rtl_write_byte(rtlpriv, REG_SECCFG, *((u8 *)val));
+		break;
+	case HW_VAR_AMPDU_MIN_SPACE: {
+		u8 min_spacing_to_set;
+		u8 sec_min_space;
+
+		min_spacing_to_set = *((u8 *)val);
+		if (min_spacing_to_set <= 7) {
+			sec_min_space = 0;
+
+			if (min_spacing_to_set < sec_min_space)
+				min_spacing_to_set = sec_min_space;
+
+			mac->min_space_cfg = ((mac->min_space_cfg & 0xf8) |
+					      min_spacing_to_set);
+
+			*val = min_spacing_to_set;
+
+			RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
+				 "Set HW_VAR_AMPDU_MIN_SPACE: %#x\n",
+				 mac->min_space_cfg);
+
+			rtl_write_byte(rtlpriv, REG_AMPDU_MIN_SPACE,
+				       mac->min_space_cfg);
+		}
+		break; }
+	case HW_VAR_SHORTGI_DENSITY: {
+		u8 density_to_set;
+
+		density_to_set = *((u8 *)val);
+		mac->min_space_cfg |= (density_to_set << 3);
+
+		RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
+			 "Set HW_VAR_SHORTGI_DENSITY: %#x\n",
+			 mac->min_space_cfg);
+
+		rtl_write_byte(rtlpriv, REG_AMPDU_MIN_SPACE,
+			       mac->min_space_cfg);
+		break; }
+	case HW_VAR_AMPDU_FACTOR: {
+		u8 regtoset_normal[4] = {0x41, 0xa8, 0x72, 0xb9};
+		u8 factor_toset;
+		u8 *p_regtoset = NULL;
+		u8 index = 0;
+
+		p_regtoset = regtoset_normal;
+
+		factor_toset = *((u8 *)val);
+		if (factor_toset <= 3) {
+			factor_toset = (1 << (factor_toset + 2));
+			if (factor_toset > 0xf)
+				factor_toset = 0xf;
+
+			for (index = 0; index < 4; index++) {
+				if ((p_regtoset[index] & 0xf0) >
+				    (factor_toset << 4))
+					p_regtoset[index] =
+						(p_regtoset[index] & 0x0f) |
+						(factor_toset << 4);
+
+				if ((p_regtoset[index] & 0x0f) > factor_toset)
+					p_regtoset[index] =
+						(p_regtoset[index] & 0xf0) |
+						(factor_toset);
+
+				rtl_write_byte(rtlpriv,
+					       (REG_AGGLEN_LMT + index),
+					       p_regtoset[index]);
+			}
+			RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
+				 "Set HW_VAR_AMPDU_FACTOR: %#x\n",
+				 factor_toset);
+		}
+		break; }
+	case HW_VAR_AC_PARAM: {
+		u8 e_aci = *((u8 *)val);
+		rtl8723_dm_init_edca_turbo(hw);
+
+		if (rtlpci->acm_method != EACMWAY2_SW)
+			rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_ACM_CTRL,
+						      (u8 *)(&e_aci));
+		break; }
+	case HW_VAR_ACM_CTRL: {
+		u8 e_aci = *((u8 *)val);
+		union aci_aifsn *p_aci_aifsn =
+				(union aci_aifsn *)(&(mac->ac[0].aifs));
+		u8 acm = p_aci_aifsn->f.acm;
+		u8 acm_ctrl = rtl_read_byte(rtlpriv, REG_ACMHWCTRL);
+
+		acm_ctrl =
+		    acm_ctrl | ((rtlpci->acm_method == 2) ? 0x0 : 0x1);
+
+		if (acm) {
+			switch (e_aci) {
+			case AC0_BE:
+				acm_ctrl |= ACMHW_BEQEN;
+				break;
+			case AC2_VI:
+				acm_ctrl |= ACMHW_VIQEN;
+				break;
+			case AC3_VO:
+				acm_ctrl |= ACMHW_VOQEN;
+				break;
+			default:
+				RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+					 "HW_VAR_ACM_CTRL acm set "
+					  "failed: eACI is %d\n", acm);
+				break;
+			}
+		} else {
+			switch (e_aci) {
+			case AC0_BE:
+				acm_ctrl &= (~ACMHW_BEQEN);
+				break;
+			case AC2_VI:
+				acm_ctrl &= (~ACMHW_VIQEN);
+				break;
+			case AC3_VO:
+				acm_ctrl &= (~ACMHW_BEQEN);
+				break;
+			default:
+				RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+					 "switch case not process\n");
+				break;
+			}
+		}
+		RT_TRACE(rtlpriv, COMP_QOS, DBG_TRACE,
+			 "SetHwReg8190pci(): [HW_VAR_ACM_CTRL] "
+			 "Write 0x%X\n", acm_ctrl);
+		rtl_write_byte(rtlpriv, REG_ACMHWCTRL, acm_ctrl);
+		break; }
+	case HW_VAR_RCR:
+		rtl_write_dword(rtlpriv, REG_RCR, ((u32 *)(val))[0]);
+		rtlpci->receive_config = ((u32 *)(val))[0];
+		break;
+	case HW_VAR_RETRY_LIMIT: {
+		u8 retry_limit = ((u8 *)(val))[0];
+
+		rtl_write_word(rtlpriv, REG_RL,
+			       retry_limit << RETRY_LIMIT_SHORT_SHIFT |
+			       retry_limit << RETRY_LIMIT_LONG_SHIFT);
+		break; }
+	case HW_VAR_DUAL_TSF_RST:
+		rtl_write_byte(rtlpriv, REG_DUAL_TSF_RST, (BIT(0) | BIT(1)));
+		break;
+	case HW_VAR_EFUSE_BYTES:
+		rtlefuse->efuse_usedbytes = *((u16 *)val);
+		break;
+	case HW_VAR_EFUSE_USAGE:
+		rtlefuse->efuse_usedpercentage = *((u8 *)val);
+		break;
+	case HW_VAR_IO_CMD:
+		rtl8723be_phy_set_io_cmd(hw, (*(enum io_type *)val));
+		break;
+	case HW_VAR_SET_RPWM: {
+		u8 rpwm_val;
+
+		rpwm_val = rtl_read_byte(rtlpriv, REG_PCIE_HRPWM);
+		udelay(1);
+
+		if (rpwm_val & BIT(7)) {
+			rtl_write_byte(rtlpriv, REG_PCIE_HRPWM, (*(u8 *)val));
+		} else {
+			rtl_write_byte(rtlpriv, REG_PCIE_HRPWM,
+				       ((*(u8 *)val) | BIT(7)));
+		}
+		break; }
+	case HW_VAR_H2C_FW_PWRMODE:
+		rtl8723be_set_fw_pwrmode_cmd(hw, (*(u8 *)val));
+		break;
+	case HW_VAR_FW_PSMODE_STATUS:
+		ppsc->fw_current_inpsmode = *((bool *)val);
+		break;
+	case HW_VAR_RESUME_CLK_ON:
+		_rtl8723be_set_fw_ps_rf_on(hw);
+		break;
+	case HW_VAR_FW_LPS_ACTION: {
+		bool enter_fwlps = *((bool *)val);
+
+		if (enter_fwlps)
+			_rtl8723be_fwlps_enter(hw);
+		else
+			_rtl8723be_fwlps_leave(hw);
+
+		break; }
+	case HW_VAR_H2C_FW_JOINBSSRPT: {
+		u8 mstatus = (*(u8 *)val);
+		u8 tmp_regcr, tmp_reg422, bcnvalid_reg;
+		u8 count = 0, dlbcn_count = 0;
+		bool recover = false;
+
+		if (mstatus == RT_MEDIA_CONNECT) {
+			rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_AID, NULL);
+
+			tmp_regcr = rtl_read_byte(rtlpriv, REG_CR + 1);
+			rtl_write_byte(rtlpriv, REG_CR + 1,
+				       (tmp_regcr | BIT(0)));
+
+			_rtl8723be_set_bcn_ctrl_reg(hw, 0, BIT(3));
+			_rtl8723be_set_bcn_ctrl_reg(hw, BIT(4), 0);
+
+			tmp_reg422 = rtl_read_byte(rtlpriv,
+						   REG_FWHW_TXQ_CTRL + 2);
+			rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2,
+				       tmp_reg422 & (~BIT(6)));
+			if (tmp_reg422 & BIT(6))
+				recover = true;
+
+			do {
+				bcnvalid_reg = rtl_read_byte(rtlpriv,
+							     REG_TDECTRL + 2);
+				rtl_write_byte(rtlpriv, REG_TDECTRL + 2,
+					       (bcnvalid_reg | BIT(0)));
+				_rtl8723be_return_beacon_queue_skb(hw);
+
+				rtl8723be_set_fw_rsvdpagepkt(hw, 0);
+				bcnvalid_reg = rtl_read_byte(rtlpriv,
+							     REG_TDECTRL + 2);
+				count = 0;
+				while (!(bcnvalid_reg & BIT(0)) && count < 20) {
+					count++;
+					udelay(10);
+					bcnvalid_reg = rtl_read_byte(rtlpriv,
+							       REG_TDECTRL + 2);
+				}
+				dlbcn_count++;
+			} while (!(bcnvalid_reg & BIT(0)) && dlbcn_count < 5);
+
+			if (bcnvalid_reg & BIT(0))
+				rtl_write_byte(rtlpriv, REG_TDECTRL+2, BIT(0));
+
+			_rtl8723be_set_bcn_ctrl_reg(hw, BIT(3), 0);
+			_rtl8723be_set_bcn_ctrl_reg(hw, 0, BIT(4));
+
+			if (recover) {
+				rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2,
+					       tmp_reg422);
+			}
+			rtl_write_byte(rtlpriv, REG_CR + 1,
+				       (tmp_regcr & ~(BIT(0))));
+		}
+		rtl8723be_set_fw_joinbss_report_cmd(hw, (*(u8 *)val));
+		break; }
+	case HW_VAR_H2C_FW_P2P_PS_OFFLOAD:
+		rtl8723be_set_p2p_ps_offload_cmd(hw, (*(u8 *)val));
+		break;
+	case HW_VAR_AID: {
+		u16 u2btmp;
+		u2btmp = rtl_read_word(rtlpriv, REG_BCN_PSR_RPT);
+		u2btmp &= 0xC000;
+		rtl_write_word(rtlpriv, REG_BCN_PSR_RPT,
+			       (u2btmp | mac->assoc_id));
+		break; }
+	case HW_VAR_CORRECT_TSF: {
+		u8 btype_ibss = ((u8 *)(val))[0];
+
+		if (btype_ibss)
+			_rtl8723be_stop_tx_beacon(hw);
+
+		_rtl8723be_set_bcn_ctrl_reg(hw, 0, BIT(3));
+
+		rtl_write_dword(rtlpriv, REG_TSFTR,
+				(u32) (mac->tsf & 0xffffffff));
+		rtl_write_dword(rtlpriv, REG_TSFTR + 4,
+				(u32) ((mac->tsf >> 32) & 0xffffffff));
+
+		_rtl8723be_set_bcn_ctrl_reg(hw, BIT(3), 0);
+
+		if (btype_ibss)
+			_rtl8723be_resume_tx_beacon(hw);
+		break; }
+	case HW_VAR_KEEP_ALIVE: {
+		u8 array[2];
+		array[0] = 0xff;
+		array[1] = *((u8 *)val);
+		rtl8723be_fill_h2c_cmd(hw, H2C_8723BE_KEEP_ALIVE_CTRL,
+				       2, array);
+		break; }
+	default:
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 "switch case not process %x\n",
+			 variable);
+		break;
+	}
+}
+
+static bool _rtl8723be_llt_write(struct ieee80211_hw *hw, u32 address, u32 data)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	bool status = true;
+	int count = 0;
+	u32 value = _LLT_INIT_ADDR(address) | _LLT_INIT_DATA(data) |
+		    _LLT_OP(_LLT_WRITE_ACCESS);
+
+	rtl_write_dword(rtlpriv, REG_LLT_INIT, value);
+
+	do {
+		value = rtl_read_dword(rtlpriv, REG_LLT_INIT);
+		if (_LLT_NO_ACTIVE == _LLT_OP_VALUE(value))
+			break;
+
+		if (count > POLLING_LLT_THRESHOLD) {
+			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+				 "Failed to polling write LLT done at "
+				  "address %d!\n", address);
+			status = false;
+			break;
+		}
+	} while (++count);
+
+	return status;
+}
+
+static bool _rtl8723be_llt_table_init(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	unsigned short i;
+	u8 txpktbuf_bndy;
+	u8 maxpage;
+	bool status;
+
+	maxpage = 255;
+	txpktbuf_bndy = 245;
+
+	rtl_write_dword(rtlpriv, REG_TRXFF_BNDY,
+			(0x27FF0000 | txpktbuf_bndy));
+	rtl_write_byte(rtlpriv, REG_TDECTRL + 1, txpktbuf_bndy);
+
+	rtl_write_byte(rtlpriv, REG_TXPKTBUF_BCNQ_BDNY, txpktbuf_bndy);
+	rtl_write_byte(rtlpriv, REG_TXPKTBUF_MGQ_BDNY, txpktbuf_bndy);
+
+	rtl_write_byte(rtlpriv, 0x45D, txpktbuf_bndy);
+	rtl_write_byte(rtlpriv, REG_PBP, 0x31);
+	rtl_write_byte(rtlpriv, REG_RX_DRVINFO_SZ, 0x4);
+
+	for (i = 0; i < (txpktbuf_bndy - 1); i++) {
+		status = _rtl8723be_llt_write(hw, i, i + 1);
+		if (!status)
+			return status;
+	}
+	status = _rtl8723be_llt_write(hw, (txpktbuf_bndy - 1), 0xFF);
+
+	if (!status)
+		return status;
+
+	for (i = txpktbuf_bndy; i < maxpage; i++) {
+		status = _rtl8723be_llt_write(hw, i, (i + 1));
+		if (!status)
+			return status;
+	}
+	status = _rtl8723be_llt_write(hw, maxpage, txpktbuf_bndy);
+	if (!status)
+		return status;
+
+	rtl_write_dword(rtlpriv, REG_RQPN, 0x80e40808);
+	rtl_write_byte(rtlpriv, REG_RQPN_NPQ, 0x00);
+
+	return true;
+}
+
+static void _rtl8723be_gen_refresh_led_state(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	struct rtl_led *pled0 = &(pcipriv->ledctl.sw_led0);
+
+	if (rtlpriv->rtlhal.up_first_time)
+		return;
+
+	if (ppsc->rfoff_reason == RF_CHANGE_BY_IPS)
+		rtl8723be_sw_led_on(hw, pled0);
+	else if (ppsc->rfoff_reason == RF_CHANGE_BY_INIT)
+		rtl8723be_sw_led_on(hw, pled0);
+	else
+		rtl8723be_sw_led_off(hw, pled0);
+}
+
+static bool _rtl8723be_init_mac(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+
+	unsigned char bytetmp;
+	unsigned short wordtmp;
+	u16 retry = 0;
+	bool mac_func_enable;
+
+	rtl_write_byte(rtlpriv, REG_RSV_CTRL, 0x00);
+
+	/*Auto Power Down to CHIP-off State*/
+	bytetmp = rtl_read_byte(rtlpriv, REG_APS_FSMCO + 1) & (~BIT(7));
+	rtl_write_byte(rtlpriv, REG_APS_FSMCO + 1, bytetmp);
+
+	bytetmp = rtl_read_byte(rtlpriv, REG_CR);
+	if (bytetmp == 0xFF)
+		mac_func_enable = true;
+	else
+		mac_func_enable = false;
+
+	/* HW Power on sequence */
+	if (!rtlbe_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK,
+					PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,
+					RTL8723_NIC_ENABLE_FLOW)) {
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+			 "init MAC Fail as power on failure\n");
+		return false;
+	}
+	bytetmp = rtl_read_byte(rtlpriv, REG_APS_FSMCO) | BIT(4);
+	rtl_write_byte(rtlpriv, REG_APS_FSMCO, bytetmp);
+
+	bytetmp = rtl_read_byte(rtlpriv, REG_CR);
+	bytetmp = 0xff;
+	rtl_write_byte(rtlpriv, REG_CR, bytetmp);
+	mdelay(2);
+
+	bytetmp = rtl_read_byte(rtlpriv, REG_HWSEQ_CTRL);
+	bytetmp |= 0x7f;
+	rtl_write_byte(rtlpriv, REG_HWSEQ_CTRL, bytetmp);
+	mdelay(2);
+
+	bytetmp = rtl_read_byte(rtlpriv, REG_SYS_CFG + 3);
+	if (bytetmp & BIT(0)) {
+		bytetmp = rtl_read_byte(rtlpriv, 0x7c);
+		bytetmp |= BIT(6);
+		rtl_write_byte(rtlpriv, 0x7c, bytetmp);
+	}
+	bytetmp = rtl_read_byte(rtlpriv, REG_SYS_CLKR);
+	bytetmp |= BIT(3);
+	rtl_write_byte(rtlpriv, REG_SYS_CLKR, bytetmp);
+	bytetmp = rtl_read_byte(rtlpriv, REG_GPIO_MUXCFG + 1);
+	bytetmp &= ~BIT(4);
+	rtl_write_byte(rtlpriv, REG_GPIO_MUXCFG + 1, bytetmp);
+
+	bytetmp = rtl_read_byte(rtlpriv, REG_PCIE_CTRL_REG+3);
+	rtl_write_byte(rtlpriv, REG_PCIE_CTRL_REG+3, bytetmp | 0x77);
+
+	rtl_write_word(rtlpriv, REG_CR, 0x2ff);
+
+	if (!mac_func_enable) {
+		if (!_rtl8723be_llt_table_init(hw))
+			return false;
+	}
+	rtl_write_dword(rtlpriv, REG_HISR, 0xffffffff);
+	rtl_write_dword(rtlpriv, REG_HISRE, 0xffffffff);
+
+	/* Enable FW Beamformer Interrupt */
+	bytetmp = rtl_read_byte(rtlpriv, REG_FWIMR + 3);
+	rtl_write_byte(rtlpriv, REG_FWIMR + 3, bytetmp | BIT(6));
+
+	wordtmp = rtl_read_word(rtlpriv, REG_TRXDMA_CTRL);
+	wordtmp &= 0xf;
+	wordtmp |= 0xF5B1;
+	rtl_write_word(rtlpriv, REG_TRXDMA_CTRL, wordtmp);
+
+	rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 1, 0x1F);
+	rtl_write_dword(rtlpriv, REG_RCR, rtlpci->receive_config);
+	rtl_write_word(rtlpriv, REG_RXFLTMAP2, 0xFFFF);
+	rtl_write_dword(rtlpriv, REG_TCR, rtlpci->transmit_config);
+
+	rtl_write_byte(rtlpriv, 0x4d0, 0x0);
+
+	rtl_write_dword(rtlpriv, REG_BCNQ_DESA,
+			((u64) rtlpci->tx_ring[BEACON_QUEUE].dma) &
+			DMA_BIT_MASK(32));
+	rtl_write_dword(rtlpriv, REG_MGQ_DESA,
+			(u64) rtlpci->tx_ring[MGNT_QUEUE].dma &
+			DMA_BIT_MASK(32));
+	rtl_write_dword(rtlpriv, REG_VOQ_DESA,
+			(u64) rtlpci->tx_ring[VO_QUEUE].dma & DMA_BIT_MASK(32));
+	rtl_write_dword(rtlpriv, REG_VIQ_DESA,
+			(u64) rtlpci->tx_ring[VI_QUEUE].dma & DMA_BIT_MASK(32));
+	rtl_write_dword(rtlpriv, REG_BEQ_DESA,
+			(u64) rtlpci->tx_ring[BE_QUEUE].dma & DMA_BIT_MASK(32));
+	rtl_write_dword(rtlpriv, REG_BKQ_DESA,
+			(u64) rtlpci->tx_ring[BK_QUEUE].dma & DMA_BIT_MASK(32));
+	rtl_write_dword(rtlpriv, REG_HQ_DESA,
+			(u64) rtlpci->tx_ring[HIGH_QUEUE].dma &
+			DMA_BIT_MASK(32));
+	rtl_write_dword(rtlpriv, REG_RX_DESA,
+			(u64) rtlpci->rx_ring[RX_MPDU_QUEUE].dma &
+			DMA_BIT_MASK(32));
+
+	bytetmp = rtl_read_byte(rtlpriv, REG_PCIE_CTRL_REG + 3);
+	rtl_write_byte(rtlpriv, REG_PCIE_CTRL_REG + 3, bytetmp | 0x77);
+
+	rtl_write_dword(rtlpriv, REG_INT_MIG, 0);
+
+	bytetmp = rtl_read_byte(rtlpriv, REG_APSD_CTRL);
+	rtl_write_byte(rtlpriv, REG_APSD_CTRL, bytetmp & ~BIT(6));
+
+	rtl_write_byte(rtlpriv, REG_SECONDARY_CCA_CTRL, 0x3);
+
+	do {
+		retry++;
+		bytetmp = rtl_read_byte(rtlpriv, REG_APSD_CTRL);
+	} while ((retry < 200) && (bytetmp & BIT(7)));
+
+	_rtl8723be_gen_refresh_led_state(hw);
+
+	rtl_write_dword(rtlpriv, REG_MCUTST_1, 0x0);
+
+	bytetmp = rtl_read_byte(rtlpriv, REG_RXDMA_CONTROL);
+	rtl_write_byte(rtlpriv, REG_RXDMA_CONTROL, bytetmp & ~BIT(2));
+
+	return true;
+}
+
+static void _rtl8723be_hw_configure(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8 reg_bw_opmode;
+	u32 reg_ratr, reg_prsr;
+
+	reg_bw_opmode = BW_OPMODE_20MHZ;
+	reg_ratr = RATE_ALL_CCK | RATE_ALL_OFDM_AG |
+		   RATE_ALL_OFDM_1SS | RATE_ALL_OFDM_2SS;
+	reg_prsr = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
+
+	rtl_write_dword(rtlpriv, REG_RRSR, reg_prsr);
+	rtl_write_byte(rtlpriv, REG_HWSEQ_CTRL, 0xFF);
+}
+
+static void _rtl8723be_enable_aspm_back_door(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+
+	rtl_write_byte(rtlpriv, 0x34b, 0x93);
+	rtl_write_word(rtlpriv, 0x350, 0x870c);
+	rtl_write_byte(rtlpriv, 0x352, 0x1);
+
+	if (ppsc->support_backdoor)
+		rtl_write_byte(rtlpriv, 0x349, 0x1b);
+	else
+		rtl_write_byte(rtlpriv, 0x349, 0x03);
+
+	rtl_write_word(rtlpriv, 0x350, 0x2718);
+	rtl_write_byte(rtlpriv, 0x352, 0x1);
+}
+
+void rtl8723be_enable_hw_security_config(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8 sec_reg_value;
+
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG,
+		 "PairwiseEncAlgorithm = %d GroupEncAlgorithm = %d\n",
+		 rtlpriv->sec.pairwise_enc_algorithm,
+		 rtlpriv->sec.group_enc_algorithm);
+
+	if (rtlpriv->cfg->mod_params->sw_crypto || rtlpriv->sec.use_sw_sec) {
+		RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+			 "not open hw encryption\n");
+		return;
+	}
+	sec_reg_value = SCR_TXENCENABLE | SCR_RXDECENABLE;
+
+	if (rtlpriv->sec.use_defaultkey) {
+		sec_reg_value |= SCR_TXUSEDK;
+		sec_reg_value |= SCR_RXUSEDK;
+	}
+	sec_reg_value |= (SCR_RXBCUSEDK | SCR_TXBCUSEDK);
+
+	rtl_write_byte(rtlpriv, REG_CR + 1, 0x02);
+
+	RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, "The SECR-value %x\n",
+		 sec_reg_value);
+
+	rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_WPA_CONFIG, &sec_reg_value);
+}
+
+int rtl8723be_hw_init(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	bool rtstatus = true;
+	int err;
+	u8 tmp_u1b;
+	unsigned long flags;
+
+	/* reenable interrupts to not interfere with other devices */
+	local_save_flags(flags);
+	local_irq_enable();
+
+	rtlpriv->rtlhal.being_init_adapter = true;
+	rtlpriv->intf_ops->disable_aspm(hw);
+	rtstatus = _rtl8723be_init_mac(hw);
+	if (!rtstatus) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Init MAC failed\n");
+		err = 1;
+		goto exit;
+	}
+	tmp_u1b = rtl_read_byte(rtlpriv, REG_SYS_CFG);
+	tmp_u1b &= 0x7F;
+	rtl_write_byte(rtlpriv, REG_SYS_CFG, tmp_u1b);
+
+	err = rtl8723_download_fw(hw, true);
+	if (err) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+			 "Failed to download FW. Init HW without FW now..\n");
+		err = 1;
+		rtlhal->fw_ready = false;
+		goto exit;
+	} else {
+		rtlhal->fw_ready = true;
+	}
+	rtlhal->last_hmeboxnum = 0;
+	rtl8723be_phy_mac_config(hw);
+	/* because last function modify RCR, so we update
+	 * rcr var here, or TP will unstable for receive_config
+	 * is wrong, RX RCR_ACRC32 will cause TP unstabel & Rx
+	 * RCR_APP_ICV will cause mac80211 unassoc for cisco 1252
+	 */
+	rtlpci->receive_config = rtl_read_dword(rtlpriv, REG_RCR);
+	rtlpci->receive_config &= ~(RCR_ACRC32 | RCR_AICV);
+	rtl_write_dword(rtlpriv, REG_RCR, rtlpci->receive_config);
+
+	rtl8723be_phy_bb_config(hw);
+	rtlphy->rf_mode = RF_OP_BY_SW_3WIRE;
+	rtl8723be_phy_rf_config(hw);
+
+	rtlphy->rfreg_chnlval[0] = rtl_get_rfreg(hw, (enum radio_path)0,
+						 RF_CHNLBW, RFREG_OFFSET_MASK);
+	rtlphy->rfreg_chnlval[1] = rtl_get_rfreg(hw, (enum radio_path)1,
+						 RF_CHNLBW, RFREG_OFFSET_MASK);
+	rtlphy->rfreg_chnlval[0] &= 0xFFF03FF;
+	rtlphy->rfreg_chnlval[0] |= (BIT(10) | BIT(11));
+
+	rtl_set_bbreg(hw, RFPGA0_RFMOD, BCCKEN, 0x1);
+	rtl_set_bbreg(hw, RFPGA0_RFMOD, BOFDMEN, 0x1);
+	rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER2, BIT(10), 1);
+	_rtl8723be_hw_configure(hw);
+	rtl_cam_reset_all_entry(hw);
+	rtl8723be_enable_hw_security_config(hw);
+
+	ppsc->rfpwr_state = ERFON;
+
+	rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_ETHER_ADDR, mac->mac_addr);
+	_rtl8723be_enable_aspm_back_door(hw);
+	rtlpriv->intf_ops->enable_aspm(hw);
+
+	rtl8723be_bt_hw_init(hw);
+
+	rtl_set_bbreg(hw, 0x64, BIT(20), 0);
+	rtl_set_bbreg(hw, 0x64, BIT(24), 0);
+
+	rtl_set_bbreg(hw, 0x40, BIT(4), 0);
+	rtl_set_bbreg(hw, 0x40, BIT(3), 1);
+
+	rtl_set_bbreg(hw, 0x944, BIT(0)|BIT(1), 0x3);
+	rtl_set_bbreg(hw, 0x930, 0xff, 0x77);
+
+	rtl_set_bbreg(hw, 0x38, BIT(11), 0x1);
+
+	rtl_set_bbreg(hw, 0xb2c, 0xffffffff, 0x80000000);
+
+	if (ppsc->rfpwr_state == ERFON) {
+		rtl8723be_dm_check_txpower_tracking(hw);
+		rtl8723be_phy_lc_calibrate(hw);
+	}
+	tmp_u1b = efuse_read_1byte(hw, 0x1FA);
+	if (!(tmp_u1b & BIT(0))) {
+		rtl_set_rfreg(hw, RF90_PATH_A, 0x15, 0x0F, 0x05);
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, "PA BIAS path A\n");
+	}
+	if (!(tmp_u1b & BIT(4))) {
+		tmp_u1b = rtl_read_byte(rtlpriv, 0x16);
+		tmp_u1b &= 0x0F;
+		rtl_write_byte(rtlpriv, 0x16, tmp_u1b | 0x80);
+		udelay(10);
+		rtl_write_byte(rtlpriv, 0x16, tmp_u1b | 0x90);
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, "under 1.5V\n");
+	}
+	rtl8723be_dm_init(hw);
+exit:
+	local_irq_restore(flags);
+	rtlpriv->rtlhal.being_init_adapter = false;
+	return err;
+}
+
+static enum version_8723e _rtl8723be_read_chip_version(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	enum version_8723e version = VERSION_UNKNOWN;
+	u8 count = 0;
+	u8 value8;
+	u32 value32;
+
+	rtl_write_byte(rtlpriv, REG_RSV_CTRL, 0);
+
+	value8 = rtl_read_byte(rtlpriv, REG_APS_FSMCO + 2);
+	rtl_write_byte(rtlpriv, REG_APS_FSMCO + 2, value8 | BIT(0));
+
+	value8 = rtl_read_byte(rtlpriv, REG_APS_FSMCO + 1);
+	rtl_write_byte(rtlpriv, REG_APS_FSMCO + 1, value8 | BIT(0));
+
+	value8 = rtl_read_byte(rtlpriv, REG_APS_FSMCO + 1);
+	while (((value8 & BIT(0))) && (count++ < 100)) {
+		udelay(10);
+		value8 = rtl_read_byte(rtlpriv, REG_APS_FSMCO + 1);
+	}
+	count = 0;
+	value8 = rtl_read_byte(rtlpriv, REG_ROM_VERSION);
+	while ((value8 == 0) && (count++ < 50)) {
+		value8 = rtl_read_byte(rtlpriv, REG_ROM_VERSION);
+		mdelay(1);
+	}
+	value32 = rtl_read_dword(rtlpriv, REG_SYS_CFG1);
+	if ((value32 & (CHIP_8723B)) != CHIP_8723B)
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "unkown chip version\n");
+	else
+		version = (enum version_8723e) VERSION_TEST_CHIP_1T1R_8723B;
+
+		rtlphy->rf_type = RF_1T1R;
+
+	value8 = rtl_read_byte(rtlpriv, REG_ROM_VERSION);
+	if (value8 >= 0x02)
+		version |= BIT(3);
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+		 "Chip RF Type: %s\n", (rtlphy->rf_type == RF_2T2R) ?
+		 "RF_2T2R" : "RF_1T1R");
+
+	return version;
+}
+
+static int _rtl8723be_set_media_status(struct ieee80211_hw *hw,
+				       enum nl80211_iftype type)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8 bt_msr = rtl_read_byte(rtlpriv, MSR) & 0xfc;
+	enum led_ctl_mode ledaction = LED_CTL_NO_LINK;
+
+	rtl_write_dword(rtlpriv, REG_BCN_CTRL, 0);
+	RT_TRACE(rtlpriv, COMP_BEACON, DBG_LOUD,
+		 "clear 0x550 when set HW_VAR_MEDIA_STATUS\n");
+
+	if (type == NL80211_IFTYPE_UNSPECIFIED ||
+	    type == NL80211_IFTYPE_STATION) {
+		_rtl8723be_stop_tx_beacon(hw);
+		_rtl8723be_enable_bcn_sub_func(hw);
+	} else if (type == NL80211_IFTYPE_ADHOC || type == NL80211_IFTYPE_AP) {
+		_rtl8723be_resume_tx_beacon(hw);
+		_rtl8723be_disable_bcn_sub_func(hw);
+	} else {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+			 "Set HW_VAR_MEDIA_STATUS: "
+			 "No such media status(%x).\n", type);
+	}
+	switch (type) {
+	case NL80211_IFTYPE_UNSPECIFIED:
+		bt_msr |= MSR_NOLINK;
+		ledaction = LED_CTL_LINK;
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+			 "Set Network type to NO LINK!\n");
+		break;
+	case NL80211_IFTYPE_ADHOC:
+		bt_msr |= MSR_ADHOC;
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+			 "Set Network type to Ad Hoc!\n");
+		break;
+	case NL80211_IFTYPE_STATION:
+		bt_msr |= MSR_INFRA;
+		ledaction = LED_CTL_LINK;
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+			 "Set Network type to STA!\n");
+		break;
+	case NL80211_IFTYPE_AP:
+		bt_msr |= MSR_AP;
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+			 "Set Network type to AP!\n");
+		break;
+	default:
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 "Network type %d not support!\n", type);
+		return 1;
+	}
+	rtl_write_byte(rtlpriv, (MSR), bt_msr);
+	rtlpriv->cfg->ops->led_control(hw, ledaction);
+	if ((bt_msr & 0x03) == MSR_AP)
+		rtl_write_byte(rtlpriv, REG_BCNTCFG + 1, 0x00);
+	else
+		rtl_write_byte(rtlpriv, REG_BCNTCFG + 1, 0x66);
+	return 0;
+}
+
+void rtl8723be_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	u32 reg_rcr = rtlpci->receive_config;
+
+	if (rtlpriv->psc.rfpwr_state != ERFON)
+		return;
+
+	if (check_bssid) {
+		reg_rcr |= (RCR_CBSSID_DATA | RCR_CBSSID_BCN);
+		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR,
+					      (u8 *)(&reg_rcr));
+		_rtl8723be_set_bcn_ctrl_reg(hw, 0, BIT(4));
+	} else if (!check_bssid) {
+		reg_rcr &= (~(RCR_CBSSID_DATA | RCR_CBSSID_BCN));
+		_rtl8723be_set_bcn_ctrl_reg(hw, BIT(4), 0);
+		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR,
+					      (u8 *)(&reg_rcr));
+	}
+}
+
+int rtl8723be_set_network_type(struct ieee80211_hw *hw,
+			       enum nl80211_iftype type)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	if (_rtl8723be_set_media_status(hw, type))
+		return -EOPNOTSUPP;
+
+	if (rtlpriv->mac80211.link_state == MAC80211_LINKED) {
+		if (type != NL80211_IFTYPE_AP)
+			rtl8723be_set_check_bssid(hw, true);
+	} else {
+		rtl8723be_set_check_bssid(hw, false);
+	}
+	return 0;
+}
+
+/* don't set REG_EDCA_BE_PARAM here
+ * because mac80211 will send pkt when scan
+ */
+void rtl8723be_set_qos(struct ieee80211_hw *hw, int aci)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	rtl8723_dm_init_edca_turbo(hw);
+	switch (aci) {
+	case AC1_BK:
+		rtl_write_dword(rtlpriv, REG_EDCA_BK_PARAM, 0xa44f);
+		break;
+	case AC0_BE:
+		break;
+	case AC2_VI:
+		rtl_write_dword(rtlpriv, REG_EDCA_VI_PARAM, 0x5e4322);
+		break;
+	case AC3_VO:
+		rtl_write_dword(rtlpriv, REG_EDCA_VO_PARAM, 0x2f3222);
+		break;
+	default:
+		RT_ASSERT(false, "invalid aci: %d !\n", aci);
+		break;
+	}
+}
+
+void rtl8723be_enable_interrupt(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+
+	rtl_write_dword(rtlpriv, REG_HIMR, rtlpci->irq_mask[0] & 0xFFFFFFFF);
+	rtl_write_dword(rtlpriv, REG_HIMRE, rtlpci->irq_mask[1] & 0xFFFFFFFF);
+	rtlpci->irq_enabled = true;
+	/* there are some C2H CMDs have been sent
+	 * before system interrupt is enabled, e.g., C2H, CPWM.
+	 * So we need to clear all C2H events that FW has notified,
+	 * otherwise FW won't schedule any commands anymore.
+	 */
+	rtl_write_byte(rtlpriv, REG_C2HEVT_CLEAR, 0);
+	/*enable system interrupt*/
+	rtl_write_dword(rtlpriv, REG_HSIMR, rtlpci->sys_irq_mask & 0xFFFFFFFF);
+}
+
+void rtl8723be_disable_interrupt(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+
+	rtl_write_dword(rtlpriv, REG_HIMR, IMR_DISABLED);
+	rtl_write_dword(rtlpriv, REG_HIMRE, IMR_DISABLED);
+	rtlpci->irq_enabled = false;
+	synchronize_irq(rtlpci->pdev->irq);
+}
+
+static void _rtl8723be_poweroff_adapter(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	u8 u1b_tmp;
+
+	/* Combo (PCIe + USB) Card and PCIe-MF Card */
+	/* 1. Run LPS WL RFOFF flow */
+	rtlbe_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
+				   PWR_INTF_PCI_MSK, RTL8723_NIC_LPS_ENTER_FLOW);
+
+	/* 2. 0x1F[7:0] = 0 */
+	/* turn off RF */
+	rtl_write_byte(rtlpriv, REG_RF_CTRL, 0x00);
+	if ((rtl_read_byte(rtlpriv, REG_MCUFWDL) & BIT(7)) &&
+	    rtlhal->fw_ready)
+		rtl8723be_firmware_selfreset(hw);
+
+	/* Reset MCU. Suggested by Filen. */
+	u1b_tmp = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN + 1);
+	rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, (u1b_tmp & (~BIT(2))));
+
+	/* g.	MCUFWDL 0x80[1:0]= 0	 */
+	/* reset MCU ready status */
+	rtl_write_byte(rtlpriv, REG_MCUFWDL, 0x00);
+
+	/* HW card disable configuration. */
+	rtlbe_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
+				   PWR_INTF_PCI_MSK, RTL8723_NIC_DISABLE_FLOW);
+
+	/* Reset MCU IO Wrapper */
+	u1b_tmp = rtl_read_byte(rtlpriv, REG_RSV_CTRL + 1);
+	rtl_write_byte(rtlpriv, REG_RSV_CTRL + 1, (u1b_tmp & (~BIT(0))));
+	u1b_tmp = rtl_read_byte(rtlpriv, REG_RSV_CTRL + 1);
+	rtl_write_byte(rtlpriv, REG_RSV_CTRL + 1, u1b_tmp | BIT(0));
+
+	/* 7. RSV_CTRL 0x1C[7:0] = 0x0E */
+	/* lock ISO/CLK/Power control register */
+	rtl_write_byte(rtlpriv, REG_RSV_CTRL, 0x0e);
+}
+
+void rtl8723be_card_disable(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	enum nl80211_iftype opmode;
+
+	mac->link_state = MAC80211_NOLINK;
+	opmode = NL80211_IFTYPE_UNSPECIFIED;
+	_rtl8723be_set_media_status(hw, opmode);
+	if (rtlpriv->rtlhal.driver_is_goingto_unload ||
+	    ppsc->rfoff_reason > RF_CHANGE_BY_PS)
+		rtlpriv->cfg->ops->led_control(hw, LED_CTL_POWER_OFF);
+	RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC);
+	_rtl8723be_poweroff_adapter(hw);
+
+	/* after power off we should do iqk again */
+	rtlpriv->phy.iqk_initialized = false;
+}
+
+void rtl8723be_interrupt_recognized(struct ieee80211_hw *hw,
+				    u32 *p_inta, u32 *p_intb)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+
+	*p_inta = rtl_read_dword(rtlpriv, ISR) & rtlpci->irq_mask[0];
+	rtl_write_dword(rtlpriv, ISR, *p_inta);
+
+	*p_intb = rtl_read_dword(rtlpriv, REG_HISRE) &
+					rtlpci->irq_mask[1];
+	rtl_write_dword(rtlpriv, REG_HISRE, *p_intb);
+}
+
+void rtl8723be_set_beacon_related_registers(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	u16 bcn_interval, atim_window;
+
+	bcn_interval = mac->beacon_interval;
+	atim_window = 2;	/*FIX MERGE */
+	rtl8723be_disable_interrupt(hw);
+	rtl_write_word(rtlpriv, REG_ATIMWND, atim_window);
+	rtl_write_word(rtlpriv, REG_BCN_INTERVAL, bcn_interval);
+	rtl_write_word(rtlpriv, REG_BCNTCFG, 0x660f);
+	rtl_write_byte(rtlpriv, REG_RXTSF_OFFSET_CCK, 0x18);
+	rtl_write_byte(rtlpriv, REG_RXTSF_OFFSET_OFDM, 0x18);
+	rtl_write_byte(rtlpriv, 0x606, 0x30);
+	rtl8723be_enable_interrupt(hw);
+}
+
+void rtl8723be_set_beacon_interval(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	u16 bcn_interval = mac->beacon_interval;
+
+	RT_TRACE(rtlpriv, COMP_BEACON, DBG_DMESG,
+		 "beacon_interval:%d\n", bcn_interval);
+	rtl8723be_disable_interrupt(hw);
+	rtl_write_word(rtlpriv, REG_BCN_INTERVAL, bcn_interval);
+	rtl8723be_enable_interrupt(hw);
+}
+
+void rtl8723be_update_interrupt_mask(struct ieee80211_hw *hw,
+				   u32 add_msr, u32 rm_msr)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+
+	RT_TRACE(rtlpriv, COMP_INTR, DBG_LOUD,
+		 "add_msr:%x, rm_msr:%x\n", add_msr, rm_msr);
+
+	if (add_msr)
+		rtlpci->irq_mask[0] |= add_msr;
+	if (rm_msr)
+		rtlpci->irq_mask[0] &= (~rm_msr);
+	rtl8723be_disable_interrupt(hw);
+	rtl8723be_enable_interrupt(hw);
+}
+
+static u8 _rtl8723be_get_chnl_group(u8 chnl)
+{
+	u8 group;
+
+	if (chnl < 3)
+		group = 0;
+	else if (chnl < 9)
+		group = 1;
+	else
+		group = 2;
+	return group;
+}
+
+static void _rtl8723be_read_power_value_fromprom(struct ieee80211_hw *hw,
+					struct txpower_info_2g *pw2g,
+					struct txpower_info_5g *pw5g,
+					bool autoload_fail, u8 *hwinfo)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u32 path, addr = EEPROM_TX_PWR_INX, group, cnt = 0;
+
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+		 "hal_ReadPowerValueFromPROM8723BE(): "
+		 "PROMContent[0x%x]= 0x%x\n",
+		 (addr + 1), hwinfo[addr + 1]);
+	if (0xFF == hwinfo[addr + 1])  /*YJ, add, 120316*/
+		autoload_fail = true;
+
+	if (autoload_fail) {
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+			 "auto load fail : Use Default value!\n");
+		for (path = 0; path < MAX_RF_PATH; path++) {
+			/* 2.4G default value */
+			for (group = 0; group < MAX_CHNL_GROUP_24G; group++) {
+				pw2g->index_cck_base[path][group] = 0x2D;
+				pw2g->index_bw40_base[path][group] = 0x2D;
+			}
+			for (cnt = 0; cnt < MAX_TX_COUNT; cnt++) {
+				if (cnt == 0) {
+					pw2g->bw20_diff[path][0] = 0x02;
+					pw2g->ofdm_diff[path][0] = 0x04;
+				} else {
+					pw2g->bw20_diff[path][cnt] = 0xFE;
+					pw2g->bw40_diff[path][cnt] = 0xFE;
+					pw2g->cck_diff[path][cnt] = 0xFE;
+					pw2g->ofdm_diff[path][cnt] = 0xFE;
+				}
+			}
+		}
+		return;
+	}
+	for (path = 0; path < MAX_RF_PATH; path++) {
+		/*2.4G default value*/
+		for (group = 0; group < MAX_CHNL_GROUP_24G; group++) {
+			pw2g->index_cck_base[path][group] = hwinfo[addr++];
+			if (pw2g->index_cck_base[path][group] == 0xFF)
+				pw2g->index_cck_base[path][group] = 0x2D;
+		}
+		for (group = 0; group < MAX_CHNL_GROUP_24G - 1; group++) {
+			pw2g->index_bw40_base[path][group] = hwinfo[addr++];
+			if (pw2g->index_bw40_base[path][group] == 0xFF)
+				pw2g->index_bw40_base[path][group] = 0x2D;
+		}
+		for (cnt = 0; cnt < MAX_TX_COUNT; cnt++) {
+			if (cnt == 0) {
+				pw2g->bw40_diff[path][cnt] = 0;
+				if (hwinfo[addr] == 0xFF) {
+					pw2g->bw20_diff[path][cnt] = 0x02;
+				} else {
+					pw2g->bw20_diff[path][cnt] =
+						(hwinfo[addr] & 0xf0) >> 4;
+					/*bit sign number to 8 bit sign number*/
+					if (pw2g->bw20_diff[path][cnt] & BIT(3))
+						pw2g->bw20_diff[path][cnt] |= 0xF0;
+				}
+				if (hwinfo[addr] == 0xFF) {
+					pw2g->ofdm_diff[path][cnt] = 0x04;
+				} else {
+					pw2g->ofdm_diff[path][cnt] =
+							(hwinfo[addr] & 0x0f);
+					/*bit sign number to 8 bit sign number*/
+					if (pw2g->ofdm_diff[path][cnt] & BIT(3))
+						pw2g->ofdm_diff[path][cnt] |=
+									  0xF0;
+				}
+				pw2g->cck_diff[path][cnt] = 0;
+				addr++;
+			} else {
+				if (hwinfo[addr] == 0xFF) {
+					pw2g->bw40_diff[path][cnt] = 0xFE;
+				} else {
+					pw2g->bw40_diff[path][cnt] =
+						(hwinfo[addr] & 0xf0) >> 4;
+					if (pw2g->bw40_diff[path][cnt] & BIT(3))
+						pw2g->bw40_diff[path][cnt] |=
+									  0xF0;
+				}
+				if (hwinfo[addr] == 0xFF) {
+					pw2g->bw20_diff[path][cnt] = 0xFE;
+				} else {
+					pw2g->bw20_diff[path][cnt] =
+							(hwinfo[addr] & 0x0f);
+					if (pw2g->bw20_diff[path][cnt] & BIT(3))
+						pw2g->bw20_diff[path][cnt] |=
+									  0xF0;
+				}
+				addr++;
+
+				if (hwinfo[addr] == 0xFF) {
+					pw2g->ofdm_diff[path][cnt] = 0xFE;
+				} else {
+					pw2g->ofdm_diff[path][cnt] =
+						(hwinfo[addr] & 0xf0) >> 4;
+					if (pw2g->ofdm_diff[path][cnt] & BIT(3))
+						pw2g->ofdm_diff[path][cnt] |=
+									  0xF0;
+				}
+				if (hwinfo[addr] == 0xFF) {
+					pw2g->cck_diff[path][cnt] = 0xFE;
+				} else {
+					pw2g->cck_diff[path][cnt] =
+							(hwinfo[addr] & 0x0f);
+					if (pw2g->cck_diff[path][cnt] & BIT(3))
+						pw2g->cck_diff[path][cnt] |=
+									 0xF0;
+				}
+				addr++;
+			}
+		}
+		/*5G default value*/
+		for (group = 0; group < MAX_CHNL_GROUP_5G; group++) {
+			pw5g->index_bw40_base[path][group] = hwinfo[addr++];
+			if (pw5g->index_bw40_base[path][group] == 0xFF)
+				pw5g->index_bw40_base[path][group] = 0xFE;
+		}
+		for (cnt = 0; cnt < MAX_TX_COUNT; cnt++) {
+			if (cnt == 0) {
+				pw5g->bw40_diff[path][cnt] = 0;
+
+				if (hwinfo[addr] == 0xFF) {
+					pw5g->bw20_diff[path][cnt] = 0;
+				} else {
+					pw5g->bw20_diff[path][0] =
+						(hwinfo[addr] & 0xf0) >> 4;
+					if (pw5g->bw20_diff[path][cnt] & BIT(3))
+						pw5g->bw20_diff[path][cnt] |=
+									  0xF0;
+				}
+				if (hwinfo[addr] == 0xFF) {
+					pw5g->ofdm_diff[path][cnt] = 0x04;
+				} else {
+					pw5g->ofdm_diff[path][0] =
+							(hwinfo[addr] & 0x0f);
+					if (pw5g->ofdm_diff[path][cnt] & BIT(3))
+						pw5g->ofdm_diff[path][cnt] |=
+									  0xF0;
+				}
+				addr++;
+			} else {
+				if (hwinfo[addr] == 0xFF) {
+					pw5g->bw40_diff[path][cnt] = 0xFE;
+				} else {
+					pw5g->bw40_diff[path][cnt] =
+						(hwinfo[addr] & 0xf0) >> 4;
+					if (pw5g->bw40_diff[path][cnt] & BIT(3))
+						pw5g->bw40_diff[path][cnt] |= 0xF0;
+				}
+				if (hwinfo[addr] == 0xFF) {
+					pw5g->bw20_diff[path][cnt] = 0xFE;
+				} else {
+					pw5g->bw20_diff[path][cnt] =
+							(hwinfo[addr] & 0x0f);
+					if (pw5g->bw20_diff[path][cnt] & BIT(3))
+						pw5g->bw20_diff[path][cnt] |= 0xF0;
+				}
+				addr++;
+			}
+		}
+		if (hwinfo[addr] == 0xFF) {
+			pw5g->ofdm_diff[path][1] = 0xFE;
+			pw5g->ofdm_diff[path][2] = 0xFE;
+		} else {
+			pw5g->ofdm_diff[path][1] = (hwinfo[addr] & 0xf0) >> 4;
+			pw5g->ofdm_diff[path][2] = (hwinfo[addr] & 0x0f);
+		}
+		addr++;
+
+		if (hwinfo[addr] == 0xFF)
+			pw5g->ofdm_diff[path][3] = 0xFE;
+		else
+			pw5g->ofdm_diff[path][3] = (hwinfo[addr] & 0x0f);
+		addr++;
+
+		for (cnt = 1; cnt < MAX_TX_COUNT; cnt++) {
+			if (pw5g->ofdm_diff[path][cnt] == 0xFF)
+				pw5g->ofdm_diff[path][cnt] = 0xFE;
+			else if (pw5g->ofdm_diff[path][cnt] & BIT(3))
+				pw5g->ofdm_diff[path][cnt] |= 0xF0;
+		}
+	}
+}
+
+static void _rtl8723be_read_txpower_info_from_hwpg(struct ieee80211_hw *hw,
+						   bool autoload_fail,
+						   u8 *hwinfo)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	struct txpower_info_2g pw2g;
+	struct txpower_info_5g pw5g;
+	u8 rf_path, index;
+	u8 i;
+
+	_rtl8723be_read_power_value_fromprom(hw, &pw2g, &pw5g, autoload_fail,
+					     hwinfo);
+
+	for (rf_path = 0; rf_path < 2; rf_path++) {
+		for (i = 0; i < 14; i++) {
+			index = _rtl8723be_get_chnl_group(i+1);
+
+			rtlefuse->txpwrlevel_cck[rf_path][i] =
+					pw2g.index_cck_base[rf_path][index];
+			rtlefuse->txpwrlevel_ht40_1s[rf_path][i] =
+					pw2g.index_bw40_base[rf_path][index];
+		}
+		for (i = 0; i < MAX_TX_COUNT; i++) {
+			rtlefuse->txpwr_ht20diff[rf_path][i] =
+						pw2g.bw20_diff[rf_path][i];
+			rtlefuse->txpwr_ht40diff[rf_path][i] =
+						pw2g.bw40_diff[rf_path][i];
+			rtlefuse->txpwr_legacyhtdiff[rf_path][i] =
+						pw2g.ofdm_diff[rf_path][i];
+		}
+		for (i = 0; i < 14; i++) {
+			RTPRINT(rtlpriv, FINIT, INIT_EEPROM,
+				"RF(%d)-Ch(%d) [CCK / HT40_1S ] = "
+				"[0x%x / 0x%x ]\n", rf_path, i,
+				rtlefuse->txpwrlevel_cck[rf_path][i],
+				rtlefuse->txpwrlevel_ht40_1s[rf_path][i]);
+		}
+	}
+	if (!autoload_fail)
+		rtlefuse->eeprom_thermalmeter =
+					hwinfo[EEPROM_THERMAL_METER_88E];
+	else
+		rtlefuse->eeprom_thermalmeter = EEPROM_DEFAULT_THERMALMETER;
+
+	if (rtlefuse->eeprom_thermalmeter == 0xff || autoload_fail) {
+		rtlefuse->apk_thermalmeterignore = true;
+		rtlefuse->eeprom_thermalmeter = EEPROM_DEFAULT_THERMALMETER;
+	}
+	rtlefuse->thermalmeter[0] = rtlefuse->eeprom_thermalmeter;
+	RTPRINT(rtlpriv, FINIT, INIT_EEPROM,
+		"thermalmeter = 0x%x\n", rtlefuse->eeprom_thermalmeter);
+
+	if (!autoload_fail) {
+		rtlefuse->eeprom_regulatory =
+			hwinfo[EEPROM_RF_BOARD_OPTION_88E] & 0x07;/*bit0~2*/
+		if (hwinfo[EEPROM_RF_BOARD_OPTION_88E] == 0xFF)
+			rtlefuse->eeprom_regulatory = 0;
+	} else {
+		rtlefuse->eeprom_regulatory = 0;
+	}
+	RTPRINT(rtlpriv, FINIT, INIT_EEPROM,
+		"eeprom_regulatory = 0x%x\n", rtlefuse->eeprom_regulatory);
+}
+
+static void _rtl8723be_read_adapter_info(struct ieee80211_hw *hw,
+					 bool pseudo_test)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	u16 i, usvalue;
+	u8 hwinfo[HWSET_MAX_SIZE];
+	u16 eeprom_id;
+	bool is_toshiba_smid1 = false;
+	bool is_toshiba_smid2 = false;
+	bool is_samsung_smid = false;
+	bool is_lenovo_smid = false;
+	u16 toshiba_smid1[] = {
+		0x6151, 0x6152, 0x6154, 0x6155, 0x6177, 0x6178, 0x6179, 0x6180,
+		0x7151, 0x7152, 0x7154, 0x7155, 0x7177, 0x7178, 0x7179, 0x7180,
+		0x8151, 0x8152, 0x8154, 0x8155, 0x8181, 0x8182, 0x8184, 0x8185,
+		0x9151, 0x9152, 0x9154, 0x9155, 0x9181, 0x9182, 0x9184, 0x9185
+	};
+	u16 toshiba_smid2[] = {
+		0x6181, 0x6184, 0x6185, 0x7181, 0x7182, 0x7184, 0x7185, 0x8181,
+		0x8182, 0x8184, 0x8185, 0x9181, 0x9182, 0x9184, 0x9185
+	};
+	u16 samsung_smid[] = {
+		0x6191, 0x6192, 0x6193, 0x7191, 0x7192, 0x7193, 0x8191, 0x8192,
+		0x8193, 0x9191, 0x9192, 0x9193
+	};
+	u16 lenovo_smid[] = {
+		0x8195, 0x9195, 0x7194, 0x8200, 0x8201, 0x8202, 0x9199, 0x9200
+	};
+
+	if (pseudo_test) {
+		/* needs to be added */
+		return;
+	}
+	if (rtlefuse->epromtype == EEPROM_BOOT_EFUSE) {
+		rtl_efuse_shadow_map_update(hw);
+
+		memcpy(hwinfo, &rtlefuse->efuse_map[EFUSE_INIT_MAP][0],
+		       HWSET_MAX_SIZE);
+	} else if (rtlefuse->epromtype == EEPROM_93C46) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 "RTL819X Not boot from eeprom, check it !!");
+	}
+	RT_PRINT_DATA(rtlpriv, COMP_INIT, DBG_DMESG, ("MAP\n"),
+		      hwinfo, HWSET_MAX_SIZE);
+
+	eeprom_id = *((u16 *)&hwinfo[0]);
+	if (eeprom_id != RTL8723BE_EEPROM_ID) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+			 "EEPROM ID(%#x) is invalid!!\n", eeprom_id);
+		rtlefuse->autoload_failflag = true;
+	} else {
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "Autoload OK\n");
+		rtlefuse->autoload_failflag = false;
+	}
+	if (rtlefuse->autoload_failflag)
+		return;
+
+	rtlefuse->eeprom_vid = *(u16 *)&hwinfo[EEPROM_VID];
+	rtlefuse->eeprom_did = *(u16 *)&hwinfo[EEPROM_DID];
+	rtlefuse->eeprom_svid = *(u16 *)&hwinfo[EEPROM_SVID];
+	rtlefuse->eeprom_smid = *(u16 *)&hwinfo[EEPROM_SMID];
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+		 "EEPROMId = 0x%4x\n", eeprom_id);
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+		 "EEPROM VID = 0x%4x\n", rtlefuse->eeprom_vid);
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+		 "EEPROM DID = 0x%4x\n", rtlefuse->eeprom_did);
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+		 "EEPROM SVID = 0x%4x\n", rtlefuse->eeprom_svid);
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+		 "EEPROM SMID = 0x%4x\n", rtlefuse->eeprom_smid);
+
+	for (i = 0; i < 6; i += 2) {
+		usvalue = *(u16 *)&hwinfo[EEPROM_MAC_ADDR + i];
+		*((u16 *)(&rtlefuse->dev_addr[i])) = usvalue;
+	}
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "dev_addr: %pM\n",
+		 rtlefuse->dev_addr);
+
+	/*parse xtal*/
+	rtlefuse->crystalcap = hwinfo[EEPROM_XTAL_8723BE];
+	if (rtlefuse->crystalcap == 0xFF)
+		rtlefuse->crystalcap = 0x20;
+
+	_rtl8723be_read_txpower_info_from_hwpg(hw, rtlefuse->autoload_failflag,
+					       hwinfo);
+
+	rtl8723be_read_bt_coexist_info_from_hwpg(hw,
+						 rtlefuse->autoload_failflag,
+						 hwinfo);
+
+	rtlefuse->eeprom_channelplan = *(u8 *)&hwinfo[EEPROM_CHANNELPLAN];
+	rtlefuse->eeprom_version = *(u16 *)&hwinfo[EEPROM_VERSION];
+	rtlefuse->txpwr_fromeprom = true;
+	rtlefuse->eeprom_oemid = *(u8 *)&hwinfo[EEPROM_CUSTOMER_ID];
+
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+		 "EEPROM Customer ID: 0x%2x\n", rtlefuse->eeprom_oemid);
+
+	/* set channel plan to world wide 13 */
+	rtlefuse->channel_plan = COUNTRY_CODE_WORLD_WIDE_13;
+
+	if (rtlhal->oem_id == RT_CID_DEFAULT) {
+		/* Does this one have a Toshiba SMID from group 1? */
+		for (i = 0; i < sizeof(toshiba_smid1) / sizeof(u16); i++) {
+			if (rtlefuse->eeprom_smid == toshiba_smid1[i]) {
+				is_toshiba_smid1 = true;
+				break;
+			}
+		}
+		/* Does this one have a Toshiba SMID from group 2? */
+		for (i = 0; i < sizeof(toshiba_smid2) / sizeof(u16); i++) {
+			if (rtlefuse->eeprom_smid == toshiba_smid2[i]) {
+				is_toshiba_smid2 = true;
+				break;
+			}
+		}
+		/* Does this one have a Samsung SMID? */
+		for (i = 0; i < sizeof(samsung_smid) / sizeof(u16); i++) {
+			if (rtlefuse->eeprom_smid == samsung_smid[i]) {
+				is_samsung_smid = true;
+				break;
+			}
+		}
+		/* Does this one have a Lenovo SMID? */
+		for (i = 0; i < sizeof(lenovo_smid) / sizeof(u16); i++) {
+			if (rtlefuse->eeprom_smid == lenovo_smid[i]) {
+				is_lenovo_smid = true;
+				break;
+			}
+		}
+		switch (rtlefuse->eeprom_oemid) {
+		case EEPROM_CID_DEFAULT:
+			if (rtlefuse->eeprom_did == 0x8176) {
+				if (rtlefuse->eeprom_svid == 0x10EC &&
+				    is_toshiba_smid1) {
+					rtlhal->oem_id = RT_CID_TOSHIBA;
+				} else if (rtlefuse->eeprom_svid == 0x1025) {
+					rtlhal->oem_id = RT_CID_819X_ACER;
+				} else if (rtlefuse->eeprom_svid == 0x10EC &&
+					   is_samsung_smid) {
+					rtlhal->oem_id = RT_CID_819X_SAMSUNG;
+				} else if (rtlefuse->eeprom_svid == 0x10EC &&
+					   is_lenovo_smid) {
+					rtlhal->oem_id = RT_CID_819X_LENOVO;
+				} else if ((rtlefuse->eeprom_svid == 0x10EC &&
+					    rtlefuse->eeprom_smid == 0x8197) ||
+					   (rtlefuse->eeprom_svid == 0x10EC &&
+					    rtlefuse->eeprom_smid == 0x9196)) {
+					rtlhal->oem_id = RT_CID_819X_CLEVO;
+				} else if ((rtlefuse->eeprom_svid == 0x1028 &&
+					    rtlefuse->eeprom_smid == 0x8194) ||
+					   (rtlefuse->eeprom_svid == 0x1028 &&
+					    rtlefuse->eeprom_smid == 0x8198) ||
+					   (rtlefuse->eeprom_svid == 0x1028 &&
+					    rtlefuse->eeprom_smid == 0x9197) ||
+					   (rtlefuse->eeprom_svid == 0x1028 &&
+					    rtlefuse->eeprom_smid == 0x9198)) {
+					rtlhal->oem_id = RT_CID_819X_DELL;
+				} else if ((rtlefuse->eeprom_svid == 0x103C &&
+					    rtlefuse->eeprom_smid == 0x1629)) {
+					rtlhal->oem_id = RT_CID_819X_HP;
+				} else if ((rtlefuse->eeprom_svid == 0x1A32 &&
+					   rtlefuse->eeprom_smid == 0x2315)) {
+					rtlhal->oem_id = RT_CID_819X_QMI;
+				} else if ((rtlefuse->eeprom_svid == 0x10EC &&
+					   rtlefuse->eeprom_smid == 0x8203)) {
+					rtlhal->oem_id = RT_CID_819X_PRONETS;
+				} else if ((rtlefuse->eeprom_svid == 0x1043 &&
+					   rtlefuse->eeprom_smid == 0x84B5)) {
+					rtlhal->oem_id = RT_CID_819X_EDIMAX_ASUS;
+				} else {
+					rtlhal->oem_id = RT_CID_DEFAULT;
+				}
+			} else if (rtlefuse->eeprom_did == 0x8178) {
+				if (rtlefuse->eeprom_svid == 0x10EC &&
+				    is_toshiba_smid2)
+					rtlhal->oem_id = RT_CID_TOSHIBA;
+				else if (rtlefuse->eeprom_svid == 0x1025)
+					rtlhal->oem_id = RT_CID_819X_ACER;
+				else if ((rtlefuse->eeprom_svid == 0x10EC &&
+					  rtlefuse->eeprom_smid == 0x8186))
+					rtlhal->oem_id = RT_CID_819X_PRONETS;
+				else if ((rtlefuse->eeprom_svid == 0x1043 &&
+					  rtlefuse->eeprom_smid == 0x84B6))
+					rtlhal->oem_id =
+							RT_CID_819X_EDIMAX_ASUS;
+				else
+					rtlhal->oem_id = RT_CID_DEFAULT;
+			} else {
+					rtlhal->oem_id = RT_CID_DEFAULT;
+			}
+			break;
+		case EEPROM_CID_TOSHIBA:
+			rtlhal->oem_id = RT_CID_TOSHIBA;
+			break;
+		case EEPROM_CID_CCX:
+			rtlhal->oem_id = RT_CID_CCX;
+			break;
+		case EEPROM_CID_QMI:
+			rtlhal->oem_id = RT_CID_819X_QMI;
+			break;
+		case EEPROM_CID_WHQL:
+			break;
+		default:
+			rtlhal->oem_id = RT_CID_DEFAULT;
+			break;
+		}
+	}
+}
+
+static void _rtl8723be_hal_customized_behavior(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+
+	pcipriv->ledctl.led_opendrain = true;
+	switch (rtlhal->oem_id) {
+	case RT_CID_819X_HP:
+		pcipriv->ledctl.led_opendrain = true;
+		break;
+	case RT_CID_819X_LENOVO:
+	case RT_CID_DEFAULT:
+	case RT_CID_TOSHIBA:
+	case RT_CID_CCX:
+	case RT_CID_819X_ACER:
+	case RT_CID_WHQL:
+	default:
+		break;
+	}
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG,
+		 "RT Customized ID: 0x%02X\n", rtlhal->oem_id);
+}
+
+void rtl8723be_read_eeprom_info(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	u8 tmp_u1b;
+
+	rtlhal->version = _rtl8723be_read_chip_version(hw);
+	if (get_rf_type(rtlphy) == RF_1T1R)
+		rtlpriv->dm.rfpath_rxenable[0] = true;
+	else
+		rtlpriv->dm.rfpath_rxenable[0] =
+		    rtlpriv->dm.rfpath_rxenable[1] = true;
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "VersionID = 0x%4x\n",
+		 rtlhal->version);
+	tmp_u1b = rtl_read_byte(rtlpriv, REG_9346CR);
+	if (tmp_u1b & BIT(4)) {
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "Boot from EEPROM\n");
+		rtlefuse->epromtype = EEPROM_93C46;
+	} else {
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "Boot from EFUSE\n");
+		rtlefuse->epromtype = EEPROM_BOOT_EFUSE;
+	}
+	if (tmp_u1b & BIT(5)) {
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "Autoload OK\n");
+		rtlefuse->autoload_failflag = false;
+		_rtl8723be_read_adapter_info(hw, false);
+	} else {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Autoload ERR!!\n");
+	}
+	_rtl8723be_hal_customized_behavior(hw);
+}
+
+static void rtl8723be_update_hal_rate_table(struct ieee80211_hw *hw,
+					    struct ieee80211_sta *sta)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	u32 ratr_value;
+	u8 ratr_index = 0;
+	u8 nmode = mac->ht_enable;
+	u8 mimo_ps = IEEE80211_SMPS_OFF;
+	u16 shortgi_rate;
+	u32 tmp_ratr_value;
+	u8 curtxbw_40mhz = mac->bw_40;
+	u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ?
+			       1 : 0;
+	u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ?
+			       1 : 0;
+	enum wireless_mode wirelessmode = mac->mode;
+
+	if (rtlhal->current_bandtype == BAND_ON_5G)
+		ratr_value = sta->supp_rates[1] << 4;
+	else
+		ratr_value = sta->supp_rates[0];
+	if (mac->opmode == NL80211_IFTYPE_ADHOC)
+		ratr_value = 0xfff;
+	ratr_value |= (sta->ht_cap.mcs.rx_mask[1] << 20 |
+		       sta->ht_cap.mcs.rx_mask[0] << 12);
+	switch (wirelessmode) {
+	case WIRELESS_MODE_B:
+		if (ratr_value & 0x0000000c)
+			ratr_value &= 0x0000000d;
+		else
+			ratr_value &= 0x0000000f;
+		break;
+	case WIRELESS_MODE_G:
+		ratr_value &= 0x00000FF5;
+		break;
+	case WIRELESS_MODE_N_24G:
+	case WIRELESS_MODE_N_5G:
+		nmode = 1;
+		if (mimo_ps == IEEE80211_SMPS_STATIC) {
+			ratr_value &= 0x0007F005;
+		} else {
+			u32 ratr_mask;
+
+			if (get_rf_type(rtlphy) == RF_1T2R ||
+			    get_rf_type(rtlphy) == RF_1T1R)
+				ratr_mask = 0x000ff005;
+			else
+				ratr_mask = 0x0f0ff005;
+			ratr_value &= ratr_mask;
+		}
+		break;
+	default:
+		if (rtlphy->rf_type == RF_1T2R)
+			ratr_value &= 0x000ff0ff;
+		else
+			ratr_value &= 0x0f0ff0ff;
+		break;
+	}
+	if ((rtlpriv->btcoexist.bt_coexistence) &&
+	    (rtlpriv->btcoexist.bt_coexist_type == BT_CSR_BC4) &&
+	    (rtlpriv->btcoexist.bt_cur_state) &&
+	    (rtlpriv->btcoexist.bt_ant_isolation) &&
+	    ((rtlpriv->btcoexist.bt_service == BT_SCO) ||
+	     (rtlpriv->btcoexist.bt_service == BT_BUSY)))
+		ratr_value &= 0x0fffcfc0;
+	else
+		ratr_value &= 0x0FFFFFFF;
+
+	if (nmode && ((curtxbw_40mhz && curshortgi_40mhz) ||
+		      (!curtxbw_40mhz && curshortgi_20mhz))) {
+		ratr_value |= 0x10000000;
+		tmp_ratr_value = (ratr_value >> 12);
+
+		for (shortgi_rate = 15; shortgi_rate > 0; shortgi_rate--) {
+			if ((1 << shortgi_rate) & tmp_ratr_value)
+				break;
+		}
+		shortgi_rate = (shortgi_rate << 12) | (shortgi_rate << 8) |
+			       (shortgi_rate << 4) | (shortgi_rate);
+	}
+	rtl_write_dword(rtlpriv, REG_ARFR0 + ratr_index * 4, ratr_value);
+
+	RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG,
+		 "%x\n", rtl_read_dword(rtlpriv, REG_ARFR0));
+}
+
+static u8 _rtl8723be_mrate_idx_to_arfr_id(struct ieee80211_hw *hw,
+					  u8 rate_index)
+{
+	u8 ret = 0;
+
+	switch (rate_index) {
+	case RATR_INX_WIRELESS_NGB:
+		ret = 1;
+		break;
+	case RATR_INX_WIRELESS_N:
+	case RATR_INX_WIRELESS_NG:
+		ret = 5;
+		break;
+	case RATR_INX_WIRELESS_NB:
+		ret = 3;
+		break;
+	case RATR_INX_WIRELESS_GB:
+		ret = 6;
+		break;
+	case RATR_INX_WIRELESS_G:
+		ret = 7;
+		break;
+	case RATR_INX_WIRELESS_B:
+		ret = 8;
+		break;
+	default:
+		ret = 0;
+		break;
+	}
+	return ret;
+}
+
+static void rtl8723be_update_hal_rate_mask(struct ieee80211_hw *hw,
+					   struct ieee80211_sta *sta,
+					   u8 rssi_level)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_sta_info *sta_entry = NULL;
+	u32 ratr_bitmap;
+	u8 ratr_index;
+	u8 curtxbw_40mhz = (sta->ht_cap.cap &
+			    IEEE80211_HT_CAP_SUP_WIDTH_20_40) ? 1 : 0;
+	u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ?
+			       1 : 0;
+	u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ?
+			       1 : 0;
+	enum wireless_mode wirelessmode = 0;
+	bool shortgi = false;
+	u8 rate_mask[7];
+	u8 macid = 0;
+	u8 mimo_ps = IEEE80211_SMPS_OFF;
+
+	sta_entry = (struct rtl_sta_info *)sta->drv_priv;
+	wirelessmode = sta_entry->wireless_mode;
+	if (mac->opmode == NL80211_IFTYPE_STATION ||
+	    mac->opmode == NL80211_IFTYPE_MESH_POINT)
+		curtxbw_40mhz = mac->bw_40;
+	else if (mac->opmode == NL80211_IFTYPE_AP ||
+		 mac->opmode == NL80211_IFTYPE_ADHOC)
+		macid = sta->aid + 1;
+
+	ratr_bitmap = sta->supp_rates[0];
+
+	if (mac->opmode == NL80211_IFTYPE_ADHOC)
+		ratr_bitmap = 0xfff;
+
+	ratr_bitmap |= (sta->ht_cap.mcs.rx_mask[1] << 20 |
+			sta->ht_cap.mcs.rx_mask[0] << 12);
+	switch (wirelessmode) {
+	case WIRELESS_MODE_B:
+		ratr_index = RATR_INX_WIRELESS_B;
+		if (ratr_bitmap & 0x0000000c)
+			ratr_bitmap &= 0x0000000d;
+		else
+			ratr_bitmap &= 0x0000000f;
+		break;
+	case WIRELESS_MODE_G:
+		ratr_index = RATR_INX_WIRELESS_GB;
+
+		if (rssi_level == 1)
+			ratr_bitmap &= 0x00000f00;
+		else if (rssi_level == 2)
+			ratr_bitmap &= 0x00000ff0;
+		else
+			ratr_bitmap &= 0x00000ff5;
+		break;
+	case WIRELESS_MODE_A:
+		ratr_index = RATR_INX_WIRELESS_A;
+		ratr_bitmap &= 0x00000ff0;
+		break;
+	case WIRELESS_MODE_N_24G:
+	case WIRELESS_MODE_N_5G:
+		ratr_index = RATR_INX_WIRELESS_NGB;
+
+		if (mimo_ps == IEEE80211_SMPS_STATIC  ||
+		    mimo_ps == IEEE80211_SMPS_DYNAMIC) {
+			if (rssi_level == 1)
+				ratr_bitmap &= 0x00070000;
+			else if (rssi_level == 2)
+				ratr_bitmap &= 0x0007f000;
+			else
+				ratr_bitmap &= 0x0007f005;
+		} else {
+			if (rtlphy->rf_type == RF_1T1R) {
+				if (curtxbw_40mhz) {
+					if (rssi_level == 1)
+						ratr_bitmap &= 0x000f0000;
+					else if (rssi_level == 2)
+						ratr_bitmap &= 0x000ff000;
+					else
+						ratr_bitmap &= 0x000ff015;
+				} else {
+					if (rssi_level == 1)
+						ratr_bitmap &= 0x000f0000;
+					else if (rssi_level == 2)
+						ratr_bitmap &= 0x000ff000;
+					else
+						ratr_bitmap &= 0x000ff005;
+				}
+			} else {
+				if (curtxbw_40mhz) {
+					if (rssi_level == 1)
+						ratr_bitmap &= 0x0f8f0000;
+					else if (rssi_level == 2)
+						ratr_bitmap &= 0x0f8ff000;
+					else
+						ratr_bitmap &= 0x0f8ff015;
+				} else {
+					if (rssi_level == 1)
+						ratr_bitmap &= 0x0f8f0000;
+					else if (rssi_level == 2)
+						ratr_bitmap &= 0x0f8ff000;
+					else
+						ratr_bitmap &= 0x0f8ff005;
+				}
+			}
+		}
+		if ((curtxbw_40mhz && curshortgi_40mhz) ||
+		    (!curtxbw_40mhz && curshortgi_20mhz)) {
+			if (macid == 0)
+				shortgi = true;
+			else if (macid == 1)
+				shortgi = false;
+		}
+		break;
+	default:
+		ratr_index = RATR_INX_WIRELESS_NGB;
+
+		if (rtlphy->rf_type == RF_1T2R)
+			ratr_bitmap &= 0x000ff0ff;
+		else
+			ratr_bitmap &= 0x0f0ff0ff;
+		break;
+	}
+	sta_entry->ratr_index = ratr_index;
+
+	RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG,
+		 "ratr_bitmap :%x\n", ratr_bitmap);
+	*(u32 *)&rate_mask = EF4BYTE((ratr_bitmap & 0x0fffffff) |
+				     (ratr_index << 28));
+	rate_mask[0] = macid;
+	rate_mask[1] = _rtl8723be_mrate_idx_to_arfr_id(hw, ratr_index) |
+						       (shortgi ? 0x80 : 0x00);
+	rate_mask[2] = curtxbw_40mhz;
+	/* if (prox_priv->proxim_modeinfo->power_output > 0)
+	 *	rate_mask[2] |= BIT(6);
+	 */
+
+	rate_mask[3] = (u8)(ratr_bitmap & 0x000000ff);
+	rate_mask[4] = (u8)((ratr_bitmap & 0x0000ff00) >> 8);
+	rate_mask[5] = (u8)((ratr_bitmap & 0x00ff0000) >> 16);
+	rate_mask[6] = (u8)((ratr_bitmap & 0xff000000) >> 24);
+
+	RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG,
+		 "Rate_index:%x, ratr_val:%x, %x:%x:%x:%x:%x:%x:%x\n",
+		 ratr_index, ratr_bitmap,
+		 rate_mask[0], rate_mask[1],
+		 rate_mask[2], rate_mask[3],
+		 rate_mask[4], rate_mask[5],
+		 rate_mask[6]);
+	rtl8723be_fill_h2c_cmd(hw, H2C_8723BE_RA_MASK, 7, rate_mask);
+	_rtl8723be_set_bcn_ctrl_reg(hw, BIT(3), 0);
+}
+
+void rtl8723be_update_hal_rate_tbl(struct ieee80211_hw *hw,
+				   struct ieee80211_sta *sta,
+				   u8 rssi_level)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	if (rtlpriv->dm.useramask)
+		rtl8723be_update_hal_rate_mask(hw, sta, rssi_level);
+	else
+		rtl8723be_update_hal_rate_table(hw, sta);
+}
+
+void rtl8723be_update_channel_access_setting(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	u16 sifs_timer;
+
+	rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SLOT_TIME,
+				      (u8 *)&mac->slot_time);
+	if (!mac->ht_enable)
+		sifs_timer = 0x0a0a;
+	else
+		sifs_timer = 0x0e0e;
+	rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SIFS, (u8 *)&sifs_timer);
+}
+
+bool rtl8723be_gpio_radio_on_off_checking(struct ieee80211_hw *hw, u8 *valid)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	enum rf_pwrstate e_rfpowerstate_toset, cur_rfstate;
+	u8 u1tmp;
+	bool actuallyset = false;
+
+	if (rtlpriv->rtlhal.being_init_adapter)
+		return false;
+
+	if (ppsc->swrf_processing)
+		return false;
+
+	spin_lock(&rtlpriv->locks.rf_ps_lock);
+	if (ppsc->rfchange_inprogress) {
+		spin_unlock(&rtlpriv->locks.rf_ps_lock);
+		return false;
+	} else {
+		ppsc->rfchange_inprogress = true;
+		spin_unlock(&rtlpriv->locks.rf_ps_lock);
+	}
+	cur_rfstate = ppsc->rfpwr_state;
+
+	rtl_write_byte(rtlpriv, REG_GPIO_IO_SEL_2,
+		       rtl_read_byte(rtlpriv, REG_GPIO_IO_SEL_2) & ~(BIT(1)));
+
+	u1tmp = rtl_read_byte(rtlpriv, REG_GPIO_PIN_CTRL_2);
+
+	if (rtlphy->polarity_ctl)
+		e_rfpowerstate_toset = (u1tmp & BIT(1)) ? ERFOFF : ERFON;
+	else
+		e_rfpowerstate_toset = (u1tmp & BIT(1)) ? ERFON : ERFOFF;
+
+	if (ppsc->hwradiooff &&
+	    (e_rfpowerstate_toset == ERFON)) {
+		RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
+			 "GPIOChangeRF  - HW Radio ON, RF ON\n");
+
+		e_rfpowerstate_toset = ERFON;
+		ppsc->hwradiooff = false;
+		actuallyset = true;
+	} else if (!ppsc->hwradiooff &&
+		   (e_rfpowerstate_toset == ERFOFF)) {
+		RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
+			 "GPIOChangeRF  - HW Radio OFF, RF OFF\n");
+
+		e_rfpowerstate_toset = ERFOFF;
+		ppsc->hwradiooff = true;
+		actuallyset = true;
+	}
+	if (actuallyset) {
+		spin_lock(&rtlpriv->locks.rf_ps_lock);
+		ppsc->rfchange_inprogress = false;
+		spin_unlock(&rtlpriv->locks.rf_ps_lock);
+	} else {
+		if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_HALT_NIC)
+			RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC);
+
+		spin_lock(&rtlpriv->locks.rf_ps_lock);
+		ppsc->rfchange_inprogress = false;
+		spin_unlock(&rtlpriv->locks.rf_ps_lock);
+	}
+	*valid = 1;
+	return !ppsc->hwradiooff;
+}
+
+void rtl8723be_set_key(struct ieee80211_hw *hw, u32 key_index,
+		       u8 *p_macaddr, bool is_group, u8 enc_algo,
+		       bool is_wepkey, bool clear_all)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	u8 *macaddr = p_macaddr;
+	u32 entry_id = 0;
+	bool is_pairwise = false;
+
+	static u8 cam_const_addr[4][6] = {
+		{0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
+		{0x00, 0x00, 0x00, 0x00, 0x00, 0x01},
+		{0x00, 0x00, 0x00, 0x00, 0x00, 0x02},
+		{0x00, 0x00, 0x00, 0x00, 0x00, 0x03}
+	};
+	static u8 cam_const_broad[] = {
+		0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+	};
+
+	if (clear_all) {
+		u8 idx = 0;
+		u8 cam_offset = 0;
+		u8 clear_number = 5;
+
+		RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, "clear_all\n");
+
+		for (idx = 0; idx < clear_number; idx++) {
+			rtl_cam_mark_invalid(hw, cam_offset + idx);
+			rtl_cam_empty_entry(hw, cam_offset + idx);
+
+			if (idx < 5) {
+				memset(rtlpriv->sec.key_buf[idx], 0,
+				       MAX_KEY_LEN);
+				rtlpriv->sec.key_len[idx] = 0;
+			}
+		}
+	} else {
+		switch (enc_algo) {
+		case WEP40_ENCRYPTION:
+			enc_algo = CAM_WEP40;
+			break;
+		case WEP104_ENCRYPTION:
+			enc_algo = CAM_WEP104;
+			break;
+		case TKIP_ENCRYPTION:
+			enc_algo = CAM_TKIP;
+			break;
+		case AESCCMP_ENCRYPTION:
+			enc_algo = CAM_AES;
+			break;
+		default:
+			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+				 "switch case not process\n");
+			enc_algo = CAM_TKIP;
+			break;
+		}
+
+		if (is_wepkey || rtlpriv->sec.use_defaultkey) {
+			macaddr = cam_const_addr[key_index];
+			entry_id = key_index;
+		} else {
+			if (is_group) {
+				macaddr = cam_const_broad;
+				entry_id = key_index;
+			} else {
+				if (mac->opmode == NL80211_IFTYPE_AP) {
+					entry_id = rtl_cam_get_free_entry(hw,
+								p_macaddr);
+					if (entry_id >=  TOTAL_CAM_ENTRY) {
+						RT_TRACE(rtlpriv, COMP_SEC,
+							 DBG_EMERG,
+							 "Can not find free"
+							 " hw security cam "
+							 "entry\n");
+						return;
+					}
+				} else {
+					entry_id = CAM_PAIRWISE_KEY_POSITION;
+				}
+				key_index = PAIRWISE_KEYIDX;
+				is_pairwise = true;
+			}
+		}
+		if (rtlpriv->sec.key_len[key_index] == 0) {
+			RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+				 "delete one entry, entry_id is %d\n",
+				 entry_id);
+			if (mac->opmode == NL80211_IFTYPE_AP)
+				rtl_cam_del_entry(hw, p_macaddr);
+			rtl_cam_delete_one_entry(hw, p_macaddr, entry_id);
+		} else {
+			RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+				 "add one entry\n");
+			if (is_pairwise) {
+				RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+					 "set Pairwise key\n");
+
+				rtl_cam_add_one_entry(hw, macaddr, key_index,
+						      entry_id, enc_algo,
+						      CAM_CONFIG_NO_USEDK,
+						      rtlpriv->sec.key_buf[key_index]);
+			} else {
+				RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+					 "set group key\n");
+
+				if (mac->opmode == NL80211_IFTYPE_ADHOC) {
+					rtl_cam_add_one_entry(hw,
+						rtlefuse->dev_addr,
+						PAIRWISE_KEYIDX,
+						CAM_PAIRWISE_KEY_POSITION,
+						enc_algo,
+						CAM_CONFIG_NO_USEDK,
+						rtlpriv->sec.key_buf
+						[entry_id]);
+				}
+				rtl_cam_add_one_entry(hw, macaddr, key_index,
+						      entry_id, enc_algo,
+						      CAM_CONFIG_NO_USEDK,
+						      rtlpriv->sec.key_buf[entry_id]);
+			}
+		}
+	}
+}
+
+void rtl8723be_read_bt_coexist_info_from_hwpg(struct ieee80211_hw *hw,
+					      bool auto_load_fail, u8 *hwinfo)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8 value;
+	u32 tmpu_32;
+
+	if (!auto_load_fail) {
+		tmpu_32 = rtl_read_dword(rtlpriv, REG_MULTI_FUNC_CTRL);
+		if (tmpu_32 & BIT(18))
+			rtlpriv->btcoexist.btc_info.btcoexist = 1;
+		else
+			rtlpriv->btcoexist.btc_info.btcoexist = 0;
+		value = hwinfo[RF_OPTION4];
+		rtlpriv->btcoexist.btc_info.bt_type = BT_RTL8723B;
+		rtlpriv->btcoexist.btc_info.ant_num = (value & 0x1);
+	} else {
+		rtlpriv->btcoexist.btc_info.btcoexist = 0;
+		rtlpriv->btcoexist.btc_info.bt_type = BT_RTL8723B;
+		rtlpriv->btcoexist.btc_info.ant_num = ANT_X2;
+	}
+}
+
+void rtl8723be_bt_reg_init(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	/* 0:Low, 1:High, 2:From Efuse. */
+	rtlpriv->btcoexist.reg_bt_iso = 2;
+	/* 0:Idle, 1:None-SCO, 2:SCO, 3:From Counter. */
+	rtlpriv->btcoexist.reg_bt_sco = 3;
+	/* 0:Disable BT control A-MPDU, 1:Enable BT control A-MPDU. */
+	rtlpriv->btcoexist.reg_bt_sco = 0;
+}
+
+void rtl8723be_bt_hw_init(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	if (rtlpriv->cfg->ops->get_btc_status())
+		rtlpriv->btcoexist.btc_ops->btc_init_hw_config(rtlpriv);
+}
+
+void rtl8723be_suspend(struct ieee80211_hw *hw)
+{
+}
+
+void rtl8723be_resume(struct ieee80211_hw *hw)
+{
+}
+
+/* Turn on AAP (RCR:bit 0) for promicuous mode. */
+void rtl8723be_allow_all_destaddr(struct ieee80211_hw *hw, bool allow_all_da,
+				  bool write_into_reg)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+
+	if (allow_all_da) /* Set BIT0 */
+		rtlpci->receive_config |= RCR_AAP;
+	else /* Clear BIT0 */
+		rtlpci->receive_config &= ~RCR_AAP;
+
+	if (write_into_reg)
+		rtl_write_dword(rtlpriv, REG_RCR, rtlpci->receive_config);
+
+	RT_TRACE(rtlpriv, COMP_TURBO | COMP_INIT, DBG_LOUD,
+		 "receive_config = 0x%08X, write_into_reg =%d\n",
+		 rtlpci->receive_config, write_into_reg);
+}
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/hw.h b/drivers/net/wireless/rtlwifi/rtl8723be/hw.h
new file mode 100644
index 000000000000..b7449a9b57e4
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/hw.h
@@ -0,0 +1,64 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2014  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __RTL8723BE_HW_H__
+#define __RTL8723BE_HW_H__
+
+void rtl8723be_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val);
+void rtl8723be_read_eeprom_info(struct ieee80211_hw *hw);
+
+void rtl8723be_interrupt_recognized(struct ieee80211_hw *hw,
+				    u32 *p_inta, u32 *p_intb);
+int rtl8723be_hw_init(struct ieee80211_hw *hw);
+void rtl8723be_card_disable(struct ieee80211_hw *hw);
+void rtl8723be_enable_interrupt(struct ieee80211_hw *hw);
+void rtl8723be_disable_interrupt(struct ieee80211_hw *hw);
+int rtl8723be_set_network_type(struct ieee80211_hw *hw,
+			       enum nl80211_iftype type);
+void rtl8723be_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid);
+void rtl8723be_set_qos(struct ieee80211_hw *hw, int aci);
+void rtl8723be_set_beacon_related_registers(struct ieee80211_hw *hw);
+void rtl8723be_set_beacon_interval(struct ieee80211_hw *hw);
+void rtl8723be_update_interrupt_mask(struct ieee80211_hw *hw,
+				     u32 add_msr, u32 rm_msr);
+void rtl8723be_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val);
+void rtl8723be_update_hal_rate_tbl(struct ieee80211_hw *hw,
+				   struct ieee80211_sta *sta,
+				   u8 rssi_level);
+void rtl8723be_update_channel_access_setting(struct ieee80211_hw *hw);
+bool rtl8723be_gpio_radio_on_off_checking(struct ieee80211_hw *hw, u8 *valid);
+void rtl8723be_enable_hw_security_config(struct ieee80211_hw *hw);
+void rtl8723be_set_key(struct ieee80211_hw *hw, u32 key_index,
+		       u8 *p_macaddr, bool is_group, u8 enc_algo,
+		       bool is_wepkey, bool clear_all);
+void rtl8723be_read_bt_coexist_info_from_hwpg(struct ieee80211_hw *hw,
+					      bool autoload_fail, u8 *hwinfo);
+void rtl8723be_bt_reg_init(struct ieee80211_hw *hw);
+void rtl8723be_bt_hw_init(struct ieee80211_hw *hw);
+void rtl8723be_suspend(struct ieee80211_hw *hw);
+void rtl8723be_resume(struct ieee80211_hw *hw);
+void rtl8723be_allow_all_destaddr(struct ieee80211_hw *hw, bool allow_all_da,
+				  bool write_into_reg);
+#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/led.c b/drivers/net/wireless/rtlwifi/rtl8723be/led.c
new file mode 100644
index 000000000000..cb931a38dc48
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/led.c
@@ -0,0 +1,153 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2014  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "../pci.h"
+#include "reg.h"
+#include "led.h"
+
+static void _rtl8723be_init_led(struct ieee80211_hw *hw,  struct rtl_led *pled,
+				enum rtl_led_pin ledpin)
+{
+	pled->hw = hw;
+	pled->ledpin = ledpin;
+	pled->ledon = false;
+}
+
+void rtl8723be_sw_led_on(struct ieee80211_hw *hw, struct rtl_led *pled)
+{
+	u8 ledcfg;
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	RT_TRACE(rtlpriv, COMP_LED, DBG_LOUD,
+		 "LedAddr:%X ledpin =%d\n", REG_LEDCFG2, pled->ledpin);
+
+	switch (pled->ledpin) {
+	case LED_PIN_GPIO0:
+		break;
+	case LED_PIN_LED0:
+		ledcfg = rtl_read_byte(rtlpriv, REG_LEDCFG2);
+		ledcfg &= ~BIT(6);
+		rtl_write_byte(rtlpriv, REG_LEDCFG2, (ledcfg & 0xf0) | BIT(5));
+		break;
+	case LED_PIN_LED1:
+		ledcfg = rtl_read_byte(rtlpriv, REG_LEDCFG1);
+		rtl_write_byte(rtlpriv, REG_LEDCFG1, ledcfg & 0x10);
+		break;
+	default:
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 "switch case not process\n");
+		break;
+	}
+	pled->ledon = true;
+}
+
+void rtl8723be_sw_led_off(struct ieee80211_hw *hw, struct rtl_led *pled)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
+	u8 ledcfg;
+
+	RT_TRACE(rtlpriv, COMP_LED, DBG_LOUD,
+		 "LedAddr:%X ledpin =%d\n", REG_LEDCFG2, pled->ledpin);
+
+	ledcfg = rtl_read_byte(rtlpriv, REG_LEDCFG2);
+
+	switch (pled->ledpin) {
+	case LED_PIN_GPIO0:
+		break;
+	case LED_PIN_LED0:
+		ledcfg &= 0xf0;
+		if (pcipriv->ledctl.led_opendrain) {
+			ledcfg &= 0x90; /* Set to software control. */
+			rtl_write_byte(rtlpriv, REG_LEDCFG2, (ledcfg|BIT(3)));
+			ledcfg = rtl_read_byte(rtlpriv, REG_MAC_PINMUX_CFG);
+			ledcfg &= 0xFE;
+			rtl_write_byte(rtlpriv, REG_MAC_PINMUX_CFG, ledcfg);
+		} else {
+			ledcfg &= ~BIT(6);
+			rtl_write_byte(rtlpriv, REG_LEDCFG2,
+				       (ledcfg | BIT(3) | BIT(5)));
+		}
+		break;
+	case LED_PIN_LED1:
+		ledcfg = rtl_read_byte(rtlpriv, REG_LEDCFG1);
+		ledcfg &= 0x10; /* Set to software control. */
+		rtl_write_byte(rtlpriv, REG_LEDCFG1, ledcfg|BIT(3));
+
+		break;
+	default:
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 "switch case not processed\n");
+		break;
+	}
+	pled->ledon = false;
+}
+
+void rtl8723be_init_sw_leds(struct ieee80211_hw *hw)
+{
+	struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
+	_rtl8723be_init_led(hw, &(pcipriv->ledctl.sw_led0), LED_PIN_LED0);
+	_rtl8723be_init_led(hw, &(pcipriv->ledctl.sw_led1), LED_PIN_LED1);
+}
+
+static void _rtl8723be_sw_led_control(struct ieee80211_hw *hw,
+				      enum led_ctl_mode ledaction)
+{
+	struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
+	struct rtl_led *pled0 = &(pcipriv->ledctl.sw_led0);
+	switch (ledaction) {
+	case LED_CTL_POWER_ON:
+	case LED_CTL_LINK:
+	case LED_CTL_NO_LINK:
+		rtl8723be_sw_led_on(hw, pled0);
+		break;
+	case LED_CTL_POWER_OFF:
+		rtl8723be_sw_led_off(hw, pled0);
+		break;
+	default:
+		break;
+	}
+}
+
+void rtl8723be_led_control(struct ieee80211_hw *hw,
+			   enum led_ctl_mode ledaction)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+
+	if ((ppsc->rfoff_reason > RF_CHANGE_BY_PS) &&
+	    (ledaction == LED_CTL_TX ||
+	     ledaction == LED_CTL_RX ||
+	     ledaction == LED_CTL_SITE_SURVEY ||
+	     ledaction == LED_CTL_LINK ||
+	     ledaction == LED_CTL_NO_LINK ||
+	     ledaction == LED_CTL_START_TO_LINK ||
+	     ledaction == LED_CTL_POWER_ON)) {
+		return;
+	}
+	RT_TRACE(rtlpriv, COMP_LED, DBG_LOUD, "ledaction %d,\n", ledaction);
+	_rtl8723be_sw_led_control(hw, ledaction);
+}
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/led.h b/drivers/net/wireless/rtlwifi/rtl8723be/led.h
new file mode 100644
index 000000000000..c57de379ee8d
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/led.h
@@ -0,0 +1,35 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2014  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __RTL8723BE_LED_H__
+#define __RTL8723BE_LED_H__
+
+void rtl8723be_init_sw_leds(struct ieee80211_hw *hw);
+void rtl8723be_sw_led_on(struct ieee80211_hw *hw, struct rtl_led *pled);
+void rtl8723be_sw_led_off(struct ieee80211_hw *hw, struct rtl_led *pled);
+void rtl8723be_led_control(struct ieee80211_hw *hw,
+			   enum led_ctl_mode ledaction);
+
+#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/phy.c b/drivers/net/wireless/rtlwifi/rtl8723be/phy.c
new file mode 100644
index 000000000000..ebc1e2788fca
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/phy.c
@@ -0,0 +1,2175 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2014  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "../pci.h"
+#include "../ps.h"
+#include "reg.h"
+#include "def.h"
+#include "phy.h"
+#include "../rtl8723com/phy_common.h"
+#include "rf.h"
+#include "dm.h"
+#include "table.h"
+#include "trx.h"
+
+static bool _rtl8723be_phy_bb8723b_config_parafile(struct ieee80211_hw *hw);
+static bool _rtl8723be_phy_config_bb_with_pgheaderfile(struct ieee80211_hw *hw,
+						       u8 configtype);
+static bool rtl8723be_phy_sw_chn_step_by_step(struct ieee80211_hw *hw,
+					      u8 channel, u8 *stage,
+					      u8 *step, u32 *delay);
+static void _rtl8723be_config_bb_reg(struct ieee80211_hw *hw,
+				     u32 addr, u32 data);
+
+static bool _rtl8723be_check_condition(struct ieee80211_hw *hw,
+				       const u32  condition)
+{
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	u32 _board = rtlefuse->board_type; /*need efuse define*/
+	u32 _interface = rtlhal->interface;
+	u32 _platform = 0x08;/*SupportPlatform */
+	u32 cond = condition;
+
+	if (condition == 0xCDCDCDCD)
+		return true;
+
+	cond = condition & 0xFF;
+	if ((_board & cond) == 0 && cond != 0x1F)
+		return false;
+
+	cond = condition & 0xFF00;
+	cond = cond >> 8;
+	if ((_interface & cond) == 0 && cond != 0x07)
+		return false;
+
+	cond = condition & 0xFF0000;
+	cond = cond >> 16;
+	if ((_platform & cond) == 0 && cond != 0x0F)
+		return false;
+	return true;
+}
+
+static bool _rtl8723be_phy_config_mac_with_headerfile(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u32 i;
+	u32 arraylength;
+	u32 *ptrarray;
+
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, "Read rtl8723beMACPHY_Array\n");
+	arraylength = RTL8723BEMAC_1T_ARRAYLEN;
+	ptrarray = RTL8723BEMAC_1T_ARRAY;
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+		 "Img:RTL8723bEMAC_1T_ARRAY LEN %d\n", arraylength);
+	for (i = 0; i < arraylength; i = i + 2)
+		rtl_write_byte(rtlpriv, ptrarray[i], (u8) ptrarray[i + 1]);
+	return true;
+}
+
+static bool _rtl8723be_phy_config_bb_with_headerfile(struct ieee80211_hw *hw,
+						     u8 configtype)
+{
+	#define READ_NEXT_PAIR(v1, v2, i) \
+		do { \
+			i += 2; \
+			v1 = array_table[i];\
+			v2 = array_table[i+1]; \
+		} while (0)
+
+	int i;
+	u32 *array_table;
+	u16 arraylen;
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u32 v1 = 0, v2 = 0;
+
+	if (configtype == BASEBAND_CONFIG_PHY_REG) {
+		arraylen = RTL8723BEPHY_REG_1TARRAYLEN;
+		array_table = RTL8723BEPHY_REG_1TARRAY;
+
+		for (i = 0; i < arraylen; i = i + 2) {
+			v1 = array_table[i];
+			v2 = array_table[i+1];
+			if (v1 < 0xcdcdcdcd) {
+				_rtl8723be_config_bb_reg(hw, v1, v2);
+			} else {/*This line is the start line of branch.*/
+				if (!_rtl8723be_check_condition(hw, array_table[i])) {
+					/*Discard the following (offset, data) pairs*/
+					READ_NEXT_PAIR(v1, v2, i);
+					while (v2 != 0xDEAD &&
+					       v2 != 0xCDEF &&
+					       v2 != 0xCDCD &&
+					       i < arraylen - 2) {
+						READ_NEXT_PAIR(v1, v2, i);
+					}
+					i -= 2; /* prevent from for-loop += 2*/
+				/* Configure matched pairs and
+				 * skip to end of if-else.
+				 */
+				} else {
+					READ_NEXT_PAIR(v1, v2, i);
+					while (v2 != 0xDEAD &&
+					       v2 != 0xCDEF &&
+					       v2 != 0xCDCD &&
+					       i < arraylen - 2) {
+						_rtl8723be_config_bb_reg(hw,
+								    v1, v2);
+						READ_NEXT_PAIR(v1, v2, i);
+					}
+
+					while (v2 != 0xDEAD && i < arraylen - 2)
+						READ_NEXT_PAIR(v1, v2, i);
+				}
+			}
+		}
+	} else if (configtype == BASEBAND_CONFIG_AGC_TAB) {
+		arraylen = RTL8723BEAGCTAB_1TARRAYLEN;
+		array_table = RTL8723BEAGCTAB_1TARRAY;
+
+		for (i = 0; i < arraylen; i = i + 2) {
+			v1 = array_table[i];
+			v2 = array_table[i+1];
+			if (v1 < 0xCDCDCDCD) {
+				rtl_set_bbreg(hw, array_table[i],
+					      MASKDWORD,
+					      array_table[i + 1]);
+				udelay(1);
+				continue;
+			} else {/*This line is the start line of branch.*/
+				if (!_rtl8723be_check_condition(hw, array_table[i])) {
+					/* Discard the following
+					 * (offset, data) pairs
+					 */
+					READ_NEXT_PAIR(v1, v2, i);
+					while (v2 != 0xDEAD &&
+					       v2 != 0xCDEF &&
+					       v2 != 0xCDCD &&
+					       i < arraylen - 2) {
+						READ_NEXT_PAIR(v1, v2, i);
+					}
+					i -= 2; /* prevent from for-loop += 2*/
+				/*Configure matched pairs and
+				 *skip to end of if-else.
+				 */
+				} else {
+					READ_NEXT_PAIR(v1, v2, i);
+					while (v2 != 0xDEAD &&
+					       v2 != 0xCDEF &&
+					       v2 != 0xCDCD &&
+					       i < arraylen - 2) {
+						rtl_set_bbreg(hw, array_table[i],
+							      MASKDWORD,
+							      array_table[i + 1]);
+						udelay(1);
+						READ_NEXT_PAIR(v1, v2, i);
+					}
+
+					while (v2 != 0xDEAD && i < arraylen - 2)
+						READ_NEXT_PAIR(v1, v2, i);
+				}
+			}
+			RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+				 "The agctab_array_table[0] is "
+				  "%x Rtl818EEPHY_REGArray[1] is %x\n",
+				  array_table[i], array_table[i + 1]);
+		}
+	}
+	return true;
+}
+
+static u8 _rtl8723be_get_rate_section_index(u32 regaddr)
+{
+	u8 index = 0;
+
+	switch (regaddr) {
+	case RTXAGC_A_RATE18_06:
+	case RTXAGC_B_RATE18_06:
+		index = 0;
+		break;
+	case RTXAGC_A_RATE54_24:
+	case RTXAGC_B_RATE54_24:
+		index = 1;
+		break;
+	case RTXAGC_A_CCK1_MCS32:
+	case RTXAGC_B_CCK1_55_MCS32:
+		index = 2;
+		break;
+	case RTXAGC_B_CCK11_A_CCK2_11:
+		index = 3;
+		break;
+	case RTXAGC_A_MCS03_MCS00:
+	case RTXAGC_B_MCS03_MCS00:
+		index = 4;
+		break;
+	case RTXAGC_A_MCS07_MCS04:
+	case RTXAGC_B_MCS07_MCS04:
+		index = 5;
+		break;
+	case RTXAGC_A_MCS11_MCS08:
+	case RTXAGC_B_MCS11_MCS08:
+		index = 6;
+		break;
+	case RTXAGC_A_MCS15_MCS12:
+	case RTXAGC_B_MCS15_MCS12:
+		index = 7;
+		break;
+	default:
+		regaddr &= 0xFFF;
+		if (regaddr >= 0xC20 && regaddr <= 0xC4C)
+			index = (u8) ((regaddr - 0xC20) / 4);
+		else if (regaddr >= 0xE20 && regaddr <= 0xE4C)
+			index = (u8) ((regaddr - 0xE20) / 4);
+		break;
+	};
+	return index;
+}
+
+u32 rtl8723be_phy_query_rf_reg(struct ieee80211_hw *hw, enum radio_path rfpath,
+			       u32 regaddr, u32 bitmask)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u32 original_value, readback_value, bitshift;
+	unsigned long flags;
+
+	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE,
+		 "regaddr(%#x), rfpath(%#x), bitmask(%#x)\n",
+		  regaddr, rfpath, bitmask);
+
+	spin_lock_irqsave(&rtlpriv->locks.rf_lock, flags);
+
+	original_value = rtl8723_phy_rf_serial_read(hw, rfpath, regaddr);
+	bitshift = rtl8723_phy_calculate_bit_shift(bitmask);
+	readback_value = (original_value & bitmask) >> bitshift;
+
+	spin_unlock_irqrestore(&rtlpriv->locks.rf_lock, flags);
+
+	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE,
+		 "regaddr(%#x), rfpath(%#x), "
+		  "bitmask(%#x), original_value(%#x)\n",
+		  regaddr, rfpath, bitmask, original_value);
+
+	return readback_value;
+}
+
+void rtl8723be_phy_set_rf_reg(struct ieee80211_hw *hw, enum radio_path path,
+			      u32 regaddr, u32 bitmask, u32 data)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u32 original_value, bitshift;
+	unsigned long flags;
+
+	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE,
+		 "regaddr(%#x), bitmask(%#x), data(%#x), rfpath(%#x)\n",
+		  regaddr, bitmask, data, path);
+
+	spin_lock_irqsave(&rtlpriv->locks.rf_lock, flags);
+
+	if (bitmask != RFREG_OFFSET_MASK) {
+			original_value = rtl8723_phy_rf_serial_read(hw, path,
+								    regaddr);
+			bitshift = rtl8723_phy_calculate_bit_shift(bitmask);
+			data = ((original_value & (~bitmask)) |
+				(data << bitshift));
+		}
+
+	rtl8723_phy_rf_serial_write(hw, path, regaddr, data);
+
+	spin_unlock_irqrestore(&rtlpriv->locks.rf_lock, flags);
+
+	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE,
+		 "regaddr(%#x), bitmask(%#x), data(%#x), rfpath(%#x)\n",
+		  regaddr, bitmask, data, path);
+}
+
+bool rtl8723be_phy_mac_config(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	bool rtstatus = _rtl8723be_phy_config_mac_with_headerfile(hw);
+
+	rtl_write_byte(rtlpriv, 0x04CA, 0x0B);
+	return rtstatus;
+}
+
+bool rtl8723be_phy_bb_config(struct ieee80211_hw *hw)
+{
+	bool rtstatus = true;
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u16 regval;
+	u8 reg_hwparafile = 1;
+	u32 tmp;
+	u8 crystalcap = rtlpriv->efuse.crystalcap;
+	rtl8723_phy_init_bb_rf_reg_def(hw);
+	regval = rtl_read_word(rtlpriv, REG_SYS_FUNC_EN);
+	rtl_write_word(rtlpriv, REG_SYS_FUNC_EN,
+		       regval | BIT(13) | BIT(0) | BIT(1));
+
+	rtl_write_byte(rtlpriv, REG_RF_CTRL, RF_EN | RF_RSTB | RF_SDMRSTB);
+	rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN,
+		       FEN_PPLL | FEN_PCIEA | FEN_DIO_PCIE |
+		       FEN_BB_GLB_RSTN | FEN_BBRSTB);
+	tmp = rtl_read_dword(rtlpriv, 0x4c);
+	rtl_write_dword(rtlpriv, 0x4c, tmp | BIT(23));
+
+	rtl_write_byte(rtlpriv, REG_AFE_XTAL_CTRL + 1, 0x80);
+
+	if (reg_hwparafile == 1)
+		rtstatus = _rtl8723be_phy_bb8723b_config_parafile(hw);
+
+	crystalcap = crystalcap & 0x3F;
+	rtl_set_bbreg(hw, REG_MAC_PHY_CTRL, 0xFFF000,
+		      (crystalcap | crystalcap << 6));
+
+	return rtstatus;
+}
+
+bool rtl8723be_phy_rf_config(struct ieee80211_hw *hw)
+{
+	return rtl8723be_phy_rf6052_config(hw);
+}
+
+static void _rtl8723be_config_rf_reg(struct ieee80211_hw *hw, u32 addr,
+				     u32 data, enum radio_path rfpath,
+				     u32 regaddr)
+{
+	if (addr == 0xfe || addr == 0xffe) {
+		mdelay(50);
+	} else {
+		rtl_set_rfreg(hw, rfpath, regaddr, RFREG_OFFSET_MASK, data);
+		udelay(1);
+	}
+}
+
+static void _rtl8723be_config_rf_radio_a(struct ieee80211_hw *hw,
+					 u32 addr, u32 data)
+{
+	u32 content = 0x1000; /*RF Content: radio_a_txt*/
+	u32 maskforphyset = (u32)(content & 0xE000);
+
+	_rtl8723be_config_rf_reg(hw, addr, data, RF90_PATH_A,
+				 addr | maskforphyset);
+}
+
+static void _rtl8723be_phy_init_tx_power_by_rate(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+	u8 band, path, txnum, section;
+
+	for (band = BAND_ON_2_4G; band <= BAND_ON_5G; ++band)
+		for (path = 0; path < TX_PWR_BY_RATE_NUM_RF; ++path)
+			for (txnum = 0; txnum < TX_PWR_BY_RATE_NUM_RF; ++txnum)
+				for (section = 0;
+				     section < TX_PWR_BY_RATE_NUM_SECTION;
+				     ++section)
+					rtlphy->tx_power_by_rate_offset[band]
+						[path][txnum][section] = 0;
+}
+
+static void _rtl8723be_config_bb_reg(struct ieee80211_hw *hw,
+				     u32 addr, u32 data)
+{
+	if (addr == 0xfe) {
+		mdelay(50);
+	} else if (addr == 0xfd) {
+		mdelay(5);
+	} else if (addr == 0xfc) {
+		mdelay(1);
+	} else if (addr == 0xfb) {
+		udelay(50);
+	} else if (addr == 0xfa) {
+		udelay(5);
+	} else if (addr == 0xf9) {
+		udelay(1);
+	} else {
+		rtl_set_bbreg(hw, addr, MASKDWORD, data);
+		udelay(1);
+	}
+}
+
+static void phy_set_txpwr_by_rate_base(struct ieee80211_hw *hw, u8 band,
+				       u8 path, u8 rate_section,
+				       u8 txnum, u8 value)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+	if (path > RF90_PATH_D) {
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+			 "Invalid Rf Path %d in phy_SetTxPowerByRatBase()\n",
+			  path);
+		return;
+	}
+
+	if (band == BAND_ON_2_4G) {
+		switch (rate_section) {
+		case CCK:
+			rtlphy->txpwr_by_rate_base_24g[path][txnum][0] = value;
+			break;
+		case OFDM:
+			rtlphy->txpwr_by_rate_base_24g[path][txnum][1] = value;
+			break;
+		case HT_MCS0_MCS7:
+			rtlphy->txpwr_by_rate_base_24g[path][txnum][2] = value;
+			break;
+		case HT_MCS8_MCS15:
+			rtlphy->txpwr_by_rate_base_24g[path][txnum][3] = value;
+			break;
+		default:
+			RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+				 "Invalid RateSection %d in Band 2.4G, Rf Path"
+				  " %d, %dTx in PHY_SetTxPowerByRateBase()\n",
+				  rate_section, path, txnum);
+			break;
+		};
+	} else {
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+			 "Invalid Band %d in PHY_SetTxPowerByRateBase()\n",
+			  band);
+	}
+}
+
+static u8 phy_get_txpwr_by_rate_base(struct ieee80211_hw *hw, u8 band, u8 path,
+				     u8 txnum, u8 rate_section)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	u8 value = 0;
+	if (path > RF90_PATH_D) {
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+			 "Invalid Rf Path %d in PHY_GetTxPowerByRateBase()\n",
+			  path);
+		return 0;
+	}
+
+	if (band == BAND_ON_2_4G) {
+		switch (rate_section) {
+		case CCK:
+			value = rtlphy->txpwr_by_rate_base_24g[path][txnum][0];
+			break;
+		case OFDM:
+			value = rtlphy->txpwr_by_rate_base_24g[path][txnum][1];
+			break;
+		case HT_MCS0_MCS7:
+			value = rtlphy->txpwr_by_rate_base_24g[path][txnum][2];
+			break;
+		case HT_MCS8_MCS15:
+			value = rtlphy->txpwr_by_rate_base_24g[path][txnum][3];
+			break;
+		default:
+			RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+				 "Invalid RateSection %d in Band 2.4G, Rf Path"
+				  " %d, %dTx in PHY_GetTxPowerByRateBase()\n",
+				  rate_section, path, txnum);
+			break;
+		};
+	} else {
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+			 "Invalid Band %d in PHY_GetTxPowerByRateBase()\n",
+			  band);
+	}
+
+	return value;
+}
+
+static void _rtl8723be_phy_store_txpower_by_rate_base(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	u16 raw_value = 0;
+	u8 base = 0, path = 0;
+
+	for (path = RF90_PATH_A; path <= RF90_PATH_B; ++path) {
+		if (path == RF90_PATH_A) {
+			raw_value = (u16) (rtlphy->tx_power_by_rate_offset
+				[BAND_ON_2_4G][path][RF_1TX][3] >> 24) & 0xFF;
+			base = (raw_value >> 4) * 10 + (raw_value & 0xF);
+			phy_set_txpwr_by_rate_base(hw, BAND_ON_2_4G, path, CCK,
+						   RF_1TX, base);
+		} else if (path == RF90_PATH_B) {
+			raw_value = (u16) (rtlphy->tx_power_by_rate_offset
+				[BAND_ON_2_4G][path][RF_1TX][3] >> 0) & 0xFF;
+			base = (raw_value >> 4) * 10 + (raw_value & 0xF);
+			phy_set_txpwr_by_rate_base(hw, BAND_ON_2_4G, path,
+						   CCK, RF_1TX, base);
+		}
+		raw_value = (u16) (rtlphy->tx_power_by_rate_offset[BAND_ON_2_4G]
+					  [path][RF_1TX][1] >> 24) & 0xFF;
+		base = (raw_value >> 4) * 10 + (raw_value & 0xF);
+		phy_set_txpwr_by_rate_base(hw, BAND_ON_2_4G, path, OFDM, RF_1TX,
+					   base);
+
+		raw_value = (u16) (rtlphy->tx_power_by_rate_offset[BAND_ON_2_4G]
+					  [path][RF_1TX][5] >> 24) & 0xFF;
+		base = (raw_value >> 4) * 10 + (raw_value & 0xF);
+		phy_set_txpwr_by_rate_base(hw, BAND_ON_2_4G, path, HT_MCS0_MCS7,
+					   RF_1TX, base);
+
+		raw_value = (u16) (rtlphy->tx_power_by_rate_offset[BAND_ON_2_4G]
+					  [path][RF_2TX][7] >> 24) & 0xFF;
+		base = (raw_value >> 4) * 10 + (raw_value & 0xF);
+		phy_set_txpwr_by_rate_base(hw, BAND_ON_2_4G, path,
+					   HT_MCS8_MCS15, RF_2TX, base);
+	}
+}
+
+static void phy_conv_dbm_to_rel(u32 *data, u8 start, u8 end, u8 base_val)
+{
+	char i = 0;
+	u8 temp_value = 0;
+	u32 temp_data = 0;
+
+	for (i = 3; i >= 0; --i) {
+		if (i >= start && i <= end) {
+			/* Get the exact value */
+			temp_value = (u8) (*data >> (i * 8)) & 0xF;
+			temp_value += ((u8) ((*data >> (i*8 + 4)) & 0xF)) * 10;
+
+			/* Change the value to a relative value */
+			temp_value = (temp_value > base_val) ?
+				     temp_value - base_val :
+				     base_val - temp_value;
+		} else {
+			temp_value = (u8) (*data >> (i * 8)) & 0xFF;
+		}
+		temp_data <<= 8;
+		temp_data |= temp_value;
+	}
+	*data = temp_data;
+}
+
+static void conv_dbm_to_rel(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	u8 base = 0, rfpath = RF90_PATH_A;
+
+	base = phy_get_txpwr_by_rate_base(hw, BAND_ON_2_4G, rfpath,
+					  RF_1TX, CCK);
+	phy_conv_dbm_to_rel(&(rtlphy->tx_power_by_rate_offset[BAND_ON_2_4G]
+			    [rfpath][RF_1TX][2]), 1, 1, base);
+	phy_conv_dbm_to_rel(&(rtlphy->tx_power_by_rate_offset[BAND_ON_2_4G]
+			    [rfpath][RF_1TX][3]), 1, 3, base);
+
+	base = phy_get_txpwr_by_rate_base(hw, BAND_ON_2_4G, rfpath,
+					  RF_1TX, OFDM);
+	phy_conv_dbm_to_rel(&(rtlphy->tx_power_by_rate_offset[BAND_ON_2_4G]
+			    [rfpath][RF_1TX][0]), 0, 3, base);
+	phy_conv_dbm_to_rel(&(rtlphy->tx_power_by_rate_offset[BAND_ON_2_4G]
+			    [rfpath][RF_1TX][1]), 0, 3, base);
+
+	base = phy_get_txpwr_by_rate_base(hw, BAND_ON_2_4G, rfpath,
+					  RF_1TX, HT_MCS0_MCS7);
+	phy_conv_dbm_to_rel(&(rtlphy->tx_power_by_rate_offset[BAND_ON_2_4G]
+			    [rfpath][RF_1TX][4]), 0, 3, base);
+	phy_conv_dbm_to_rel(&(rtlphy->tx_power_by_rate_offset[BAND_ON_2_4G]
+			    [rfpath][RF_1TX][5]), 0, 3, base);
+
+	base = phy_get_txpwr_by_rate_base(hw, BAND_ON_2_4G, rfpath,
+					  RF_2TX, HT_MCS8_MCS15);
+	phy_conv_dbm_to_rel(&(rtlphy->tx_power_by_rate_offset[BAND_ON_2_4G]
+			    [rfpath][RF_2TX][6]), 0, 3, base);
+
+	phy_conv_dbm_to_rel(&(rtlphy->tx_power_by_rate_offset[BAND_ON_2_4G]
+			    [rfpath][RF_2TX][7]), 0, 3, base);
+
+	RT_TRACE(rtlpriv, COMP_POWER, DBG_TRACE,
+		 "<=== conv_dbm_to_rel()\n");
+}
+
+static void _rtl8723be_phy_txpower_by_rate_configuration(
+							struct ieee80211_hw *hw)
+{
+	_rtl8723be_phy_store_txpower_by_rate_base(hw);
+	conv_dbm_to_rel(hw);
+}
+
+static bool _rtl8723be_phy_bb8723b_config_parafile(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	bool rtstatus;
+
+	rtstatus = _rtl8723be_phy_config_bb_with_headerfile(hw,
+						BASEBAND_CONFIG_PHY_REG);
+	if (!rtstatus) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Write BB Reg Fail!!");
+		return false;
+	}
+	_rtl8723be_phy_init_tx_power_by_rate(hw);
+	if (!rtlefuse->autoload_failflag) {
+		rtlphy->pwrgroup_cnt = 0;
+		rtstatus = _rtl8723be_phy_config_bb_with_pgheaderfile(hw,
+						BASEBAND_CONFIG_PHY_REG);
+	}
+	_rtl8723be_phy_txpower_by_rate_configuration(hw);
+	if (!rtstatus) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "BB_PG Reg Fail!!");
+		return false;
+	}
+	rtstatus = _rtl8723be_phy_config_bb_with_headerfile(hw,
+						BASEBAND_CONFIG_AGC_TAB);
+	if (!rtstatus) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "AGC Table Fail\n");
+		return false;
+	}
+	rtlphy->cck_high_power = (bool) (rtl_get_bbreg(hw,
+						       RFPGA0_XA_HSSIPARAMETER2,
+						       0x200));
+	return true;
+}
+
+static void _rtl8723be_store_tx_power_by_rate(struct ieee80211_hw *hw,
+					      u32 band, u32 rfpath,
+					      u32 txnum, u32 regaddr,
+					      u32 bitmask, u32 data)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	u8 rate_section = _rtl8723be_get_rate_section_index(regaddr);
+
+	if (band != BAND_ON_2_4G && band != BAND_ON_5G)
+		RT_TRACE(rtlpriv, COMP_POWER, PHY_TXPWR,
+			 "Invalid Band %d\n", band);
+
+	if (rfpath > MAX_RF_PATH)
+		RT_TRACE(rtlpriv, COMP_POWER, PHY_TXPWR,
+			 "Invalid RfPath %d\n", rfpath);
+
+	if (txnum > MAX_RF_PATH)
+		RT_TRACE(rtlpriv, COMP_POWER, PHY_TXPWR,
+			 "Invalid TxNum %d\n", txnum);
+
+	rtlphy->tx_power_by_rate_offset[band][rfpath][txnum][rate_section] =
+									data;
+}
+
+static bool _rtl8723be_phy_config_bb_with_pgheaderfile(struct ieee80211_hw *hw,
+						       u8 configtype)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	int i;
+	u32 *phy_regarray_table_pg;
+	u16 phy_regarray_pg_len;
+	u32 v1 = 0, v2 = 0, v3 = 0, v4 = 0, v5 = 0, v6 = 0;
+
+	phy_regarray_pg_len = RTL8723BEPHY_REG_ARRAY_PGLEN;
+	phy_regarray_table_pg = RTL8723BEPHY_REG_ARRAY_PG;
+
+	if (configtype == BASEBAND_CONFIG_PHY_REG) {
+		for (i = 0; i < phy_regarray_pg_len; i = i + 6) {
+			v1 = phy_regarray_table_pg[i];
+			v2 = phy_regarray_table_pg[i+1];
+			v3 = phy_regarray_table_pg[i+2];
+			v4 = phy_regarray_table_pg[i+3];
+			v5 = phy_regarray_table_pg[i+4];
+			v6 = phy_regarray_table_pg[i+5];
+
+			if (v1 < 0xcdcdcdcd) {
+				if (phy_regarray_table_pg[i] == 0xfe ||
+				    phy_regarray_table_pg[i] == 0xffe)
+					mdelay(50);
+				else
+					_rtl8723be_store_tx_power_by_rate(hw,
+							v1, v2, v3, v4, v5, v6);
+				continue;
+			} else {
+				/*don't need the hw_body*/
+				if (!_rtl8723be_check_condition(hw,
+						phy_regarray_table_pg[i])) {
+					i += 2; /* skip the pair of expression*/
+					v1 = phy_regarray_table_pg[i];
+					v2 = phy_regarray_table_pg[i+1];
+					v3 = phy_regarray_table_pg[i+2];
+					while (v2 != 0xDEAD) {
+						i += 3;
+						v1 = phy_regarray_table_pg[i];
+						v2 = phy_regarray_table_pg[i+1];
+						v3 = phy_regarray_table_pg[i+2];
+					}
+				}
+			}
+		}
+	} else {
+		RT_TRACE(rtlpriv, COMP_SEND, DBG_TRACE,
+			 "configtype != BaseBand_Config_PHY_REG\n");
+	}
+	return true;
+}
+
+bool rtl8723be_phy_config_rf_with_headerfile(struct ieee80211_hw *hw,
+					     enum radio_path rfpath)
+{
+	#define READ_NEXT_RF_PAIR(v1, v2, i) \
+		do { \
+			i += 2; \
+			v1 = radioa_array_table[i]; \
+			v2 = radioa_array_table[i+1]; \
+		} while (0)
+
+	int i;
+	bool rtstatus = true;
+	u32 *radioa_array_table;
+	u16 radioa_arraylen;
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	u32 v1 = 0, v2 = 0;
+
+	radioa_arraylen = RTL8723BE_RADIOA_1TARRAYLEN;
+	radioa_array_table = RTL8723BE_RADIOA_1TARRAY;
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+		 "Radio_A:RTL8723BE_RADIOA_1TARRAY %d\n", radioa_arraylen);
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "Radio No %x\n", rfpath);
+	rtstatus = true;
+	switch (rfpath) {
+	case RF90_PATH_A:
+		for (i = 0; i < radioa_arraylen; i = i + 2) {
+			v1 = radioa_array_table[i];
+			v2 = radioa_array_table[i+1];
+			if (v1 < 0xcdcdcdcd) {
+				_rtl8723be_config_rf_radio_a(hw, v1, v2);
+			} else { /*This line is the start line of branch.*/
+				if (!_rtl8723be_check_condition(hw,
+						radioa_array_table[i])) {
+					/* Discard the following
+					 * (offset, data) pairs
+					 */
+					READ_NEXT_RF_PAIR(v1, v2, i);
+					while (v2 != 0xDEAD &&
+					       v2 != 0xCDEF &&
+					       v2 != 0xCDCD &&
+					       i < radioa_arraylen - 2)
+						READ_NEXT_RF_PAIR(v1, v2, i);
+					i -= 2; /* prevent from for-loop += 2*/
+				} else {
+					/* Configure matched pairs
+					 * and skip to end of if-else.
+					 */
+					READ_NEXT_RF_PAIR(v1, v2, i);
+					while (v2 != 0xDEAD &&
+					       v2 != 0xCDEF &&
+					       v2 != 0xCDCD &&
+					       i < radioa_arraylen - 2) {
+						_rtl8723be_config_rf_radio_a(hw,
+									v1, v2);
+						READ_NEXT_RF_PAIR(v1, v2, i);
+					}
+
+					while (v2 != 0xDEAD &&
+					       i < radioa_arraylen - 2) {
+						READ_NEXT_RF_PAIR(v1, v2, i);
+					}
+				}
+			}
+		}
+
+		if (rtlhal->oem_id == RT_CID_819X_HP)
+			_rtl8723be_config_rf_radio_a(hw, 0x52, 0x7E4BD);
+
+		break;
+	case RF90_PATH_B:
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 "switch case not process\n");
+		break;
+	case RF90_PATH_C:
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 "switch case not process\n");
+		break;
+	case RF90_PATH_D:
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 "switch case not process\n");
+		break;
+	}
+	return true;
+}
+
+void rtl8723be_phy_get_hw_reg_originalvalue(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+	rtlphy->default_initialgain[0] =
+	    (u8) rtl_get_bbreg(hw, ROFDM0_XAAGCCORE1, MASKBYTE0);
+	rtlphy->default_initialgain[1] =
+	    (u8) rtl_get_bbreg(hw, ROFDM0_XBAGCCORE1, MASKBYTE0);
+	rtlphy->default_initialgain[2] =
+	    (u8) rtl_get_bbreg(hw, ROFDM0_XCAGCCORE1, MASKBYTE0);
+	rtlphy->default_initialgain[3] =
+	    (u8) rtl_get_bbreg(hw, ROFDM0_XDAGCCORE1, MASKBYTE0);
+
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+		 "Default initial gain (c50 = 0x%x, "
+		  "c58 = 0x%x, c60 = 0x%x, c68 = 0x%x\n",
+		  rtlphy->default_initialgain[0],
+		  rtlphy->default_initialgain[1],
+		  rtlphy->default_initialgain[2],
+		  rtlphy->default_initialgain[3]);
+
+	rtlphy->framesync = (u8) rtl_get_bbreg(hw, ROFDM0_RXDETECTOR3,
+					       MASKBYTE0);
+	rtlphy->framesync_c34 = rtl_get_bbreg(hw, ROFDM0_RXDETECTOR2,
+					      MASKDWORD);
+
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+		 "Default framesync (0x%x) = 0x%x\n",
+		  ROFDM0_RXDETECTOR3, rtlphy->framesync);
+}
+
+void rtl8723be_phy_get_txpower_level(struct ieee80211_hw *hw, long *powerlevel)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	u8 txpwr_level;
+	long txpwr_dbm;
+
+	txpwr_level = rtlphy->cur_cck_txpwridx;
+	txpwr_dbm = rtl8723_phy_txpwr_idx_to_dbm(hw, WIRELESS_MODE_B,
+						 txpwr_level);
+	txpwr_level = rtlphy->cur_ofdm24g_txpwridx;
+	if (rtl8723_phy_txpwr_idx_to_dbm(hw, WIRELESS_MODE_G, txpwr_level) >
+	    txpwr_dbm)
+		txpwr_dbm =
+		    rtl8723_phy_txpwr_idx_to_dbm(hw, WIRELESS_MODE_G,
+						 txpwr_level);
+	txpwr_level = rtlphy->cur_ofdm24g_txpwridx;
+	if (rtl8723_phy_txpwr_idx_to_dbm(hw, WIRELESS_MODE_N_24G,
+					 txpwr_level) > txpwr_dbm)
+		txpwr_dbm =
+		    rtl8723_phy_txpwr_idx_to_dbm(hw, WIRELESS_MODE_N_24G,
+						 txpwr_level);
+	*powerlevel = txpwr_dbm;
+}
+
+static u8 _rtl8723be_phy_get_ratesection_intxpower_byrate(enum radio_path path,
+							  u8 rate)
+{
+	u8 rate_section = 0;
+
+	switch (rate) {
+	case DESC92C_RATE1M:
+		rate_section = 2;
+		break;
+	case DESC92C_RATE2M:
+	case DESC92C_RATE5_5M:
+		if (path == RF90_PATH_A)
+			rate_section = 3;
+		else if (path == RF90_PATH_B)
+			rate_section = 2;
+		break;
+	case DESC92C_RATE11M:
+		rate_section = 3;
+		break;
+	case DESC92C_RATE6M:
+	case DESC92C_RATE9M:
+	case DESC92C_RATE12M:
+	case DESC92C_RATE18M:
+		rate_section = 0;
+		break;
+	case DESC92C_RATE24M:
+	case DESC92C_RATE36M:
+	case DESC92C_RATE48M:
+	case DESC92C_RATE54M:
+		rate_section = 1;
+		break;
+	case DESC92C_RATEMCS0:
+	case DESC92C_RATEMCS1:
+	case DESC92C_RATEMCS2:
+	case DESC92C_RATEMCS3:
+		rate_section = 4;
+		break;
+	case DESC92C_RATEMCS4:
+	case DESC92C_RATEMCS5:
+	case DESC92C_RATEMCS6:
+	case DESC92C_RATEMCS7:
+		rate_section = 5;
+		break;
+	case DESC92C_RATEMCS8:
+	case DESC92C_RATEMCS9:
+	case DESC92C_RATEMCS10:
+	case DESC92C_RATEMCS11:
+		rate_section = 6;
+		break;
+	case DESC92C_RATEMCS12:
+	case DESC92C_RATEMCS13:
+	case DESC92C_RATEMCS14:
+	case DESC92C_RATEMCS15:
+		rate_section = 7;
+		break;
+	default:
+		RT_ASSERT(true, "Rate_Section is Illegal\n");
+		break;
+	}
+	return rate_section;
+}
+
+static u8 _rtl8723be_get_txpower_by_rate(struct ieee80211_hw *hw,
+					 enum band_type band,
+					 enum radio_path rfpath, u8 rate)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	u8 shift = 0, rate_section, tx_num;
+	char tx_pwr_diff = 0;
+
+	rate_section = _rtl8723be_phy_get_ratesection_intxpower_byrate(rfpath,
+								       rate);
+	tx_num = RF_TX_NUM_NONIMPLEMENT;
+
+	if (tx_num == RF_TX_NUM_NONIMPLEMENT) {
+		if (rate >= DESC92C_RATEMCS8 && rate <= DESC92C_RATEMCS15)
+			tx_num = RF_2TX;
+		else
+			tx_num = RF_1TX;
+	}
+
+	switch (rate) {
+	case DESC92C_RATE6M:
+	case DESC92C_RATE24M:
+	case DESC92C_RATEMCS0:
+	case DESC92C_RATEMCS4:
+	case DESC92C_RATEMCS8:
+	case DESC92C_RATEMCS12:
+		shift = 0;
+		break;
+	case DESC92C_RATE1M:
+	case DESC92C_RATE2M:
+	case DESC92C_RATE9M:
+	case DESC92C_RATE36M:
+	case DESC92C_RATEMCS1:
+	case DESC92C_RATEMCS5:
+	case DESC92C_RATEMCS9:
+	case DESC92C_RATEMCS13:
+		shift = 8;
+		break;
+	case DESC92C_RATE5_5M:
+	case DESC92C_RATE12M:
+	case DESC92C_RATE48M:
+	case DESC92C_RATEMCS2:
+	case DESC92C_RATEMCS6:
+	case DESC92C_RATEMCS10:
+	case DESC92C_RATEMCS14:
+		shift = 16;
+		break;
+	case DESC92C_RATE11M:
+	case DESC92C_RATE18M:
+	case DESC92C_RATE54M:
+	case DESC92C_RATEMCS3:
+	case DESC92C_RATEMCS7:
+	case DESC92C_RATEMCS11:
+	case DESC92C_RATEMCS15:
+		shift = 24;
+		break;
+	default:
+		RT_ASSERT(true, "Rate_Section is Illegal\n");
+		break;
+	}
+	tx_pwr_diff = (u8)(rtlphy->tx_power_by_rate_offset[band][rfpath][tx_num]
+					  [rate_section] >> shift) & 0xff;
+
+	return	tx_pwr_diff;
+}
+
+static u8 _rtl8723be_get_txpower_index(struct ieee80211_hw *hw, u8 path,
+				       u8 rate, u8 bandwidth, u8 channel)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	u8 index = (channel - 1);
+	u8 txpower;
+	u8 power_diff_byrate = 0;
+
+	if (channel > 14 || channel < 1) {
+		index = 0;
+		RT_TRACE(rtlpriv, COMP_POWER_TRACKING, DBG_LOUD,
+			 "Illegal channel!\n");
+	}
+	if (RTL8723E_RX_HAL_IS_CCK_RATE(rate))
+		txpower = rtlefuse->txpwrlevel_cck[path][index];
+	else if (DESC92C_RATE6M <= rate)
+		txpower = rtlefuse->txpwrlevel_ht40_1s[path][index];
+	else
+		RT_TRACE(rtlpriv, COMP_POWER_TRACKING, DBG_LOUD,
+			 "invalid rate\n");
+
+	if (DESC92C_RATE6M <= rate && rate <= DESC92C_RATE54M &&
+	    !RTL8723E_RX_HAL_IS_CCK_RATE(rate))
+		txpower += rtlefuse->txpwr_legacyhtdiff[0][TX_1S];
+
+	if (bandwidth == HT_CHANNEL_WIDTH_20) {
+		if (DESC92C_RATEMCS0 <= rate && rate <= DESC92C_RATEMCS15)
+			txpower += rtlefuse->txpwr_ht20diff[0][TX_1S];
+		if (DESC92C_RATEMCS8 <= rate && rate <= DESC92C_RATEMCS15)
+			txpower += rtlefuse->txpwr_ht20diff[0][TX_2S];
+	} else if (bandwidth == HT_CHANNEL_WIDTH_20_40) {
+		if (DESC92C_RATEMCS0 <= rate && rate <= DESC92C_RATEMCS15)
+			txpower += rtlefuse->txpwr_ht40diff[0][TX_1S];
+		if (DESC92C_RATEMCS8 <= rate && rate <= DESC92C_RATEMCS15)
+			txpower += rtlefuse->txpwr_ht40diff[0][TX_2S];
+	}
+	if (rtlefuse->eeprom_regulatory != 2)
+		power_diff_byrate = _rtl8723be_get_txpower_by_rate(hw,
+								   BAND_ON_2_4G,
+								   path, rate);
+
+	txpower += power_diff_byrate;
+
+	if (txpower > MAX_POWER_INDEX)
+		txpower = MAX_POWER_INDEX;
+
+	return txpower;
+}
+
+static void _rtl8723be_phy_set_txpower_index(struct ieee80211_hw *hw,
+					     u8 power_index, u8 path, u8 rate)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	if (path == RF90_PATH_A) {
+		switch (rate) {
+		case DESC92C_RATE1M:
+			rtl8723_phy_set_bb_reg(hw, RTXAGC_A_CCK1_MCS32,
+					       MASKBYTE1, power_index);
+			break;
+		case DESC92C_RATE2M:
+			rtl8723_phy_set_bb_reg(hw, RTXAGC_B_CCK11_A_CCK2_11,
+					       MASKBYTE1, power_index);
+			break;
+		case DESC92C_RATE5_5M:
+			rtl8723_phy_set_bb_reg(hw, RTXAGC_B_CCK11_A_CCK2_11,
+					       MASKBYTE2, power_index);
+			break;
+		case DESC92C_RATE11M:
+			rtl8723_phy_set_bb_reg(hw, RTXAGC_B_CCK11_A_CCK2_11,
+					       MASKBYTE3, power_index);
+			break;
+		case DESC92C_RATE6M:
+			rtl8723_phy_set_bb_reg(hw, RTXAGC_A_RATE18_06,
+					       MASKBYTE0, power_index);
+			break;
+		case DESC92C_RATE9M:
+			rtl8723_phy_set_bb_reg(hw, RTXAGC_A_RATE18_06,
+					       MASKBYTE1, power_index);
+			break;
+		case DESC92C_RATE12M:
+			rtl8723_phy_set_bb_reg(hw, RTXAGC_A_RATE18_06,
+					       MASKBYTE2, power_index);
+			break;
+		case DESC92C_RATE18M:
+			rtl8723_phy_set_bb_reg(hw, RTXAGC_A_RATE18_06,
+					       MASKBYTE3, power_index);
+			break;
+		case DESC92C_RATE24M:
+			rtl8723_phy_set_bb_reg(hw, RTXAGC_A_RATE54_24,
+					       MASKBYTE0, power_index);
+			break;
+		case DESC92C_RATE36M:
+			rtl8723_phy_set_bb_reg(hw, RTXAGC_A_RATE54_24,
+					       MASKBYTE1, power_index);
+			break;
+		case DESC92C_RATE48M:
+			rtl8723_phy_set_bb_reg(hw, RTXAGC_A_RATE54_24,
+					       MASKBYTE2, power_index);
+			break;
+		case DESC92C_RATE54M:
+			rtl8723_phy_set_bb_reg(hw, RTXAGC_A_RATE54_24,
+					       MASKBYTE3, power_index);
+			break;
+		case DESC92C_RATEMCS0:
+			rtl8723_phy_set_bb_reg(hw, RTXAGC_A_MCS03_MCS00,
+					       MASKBYTE0, power_index);
+			break;
+		case DESC92C_RATEMCS1:
+			rtl8723_phy_set_bb_reg(hw, RTXAGC_A_MCS03_MCS00,
+					       MASKBYTE1, power_index);
+			break;
+		case DESC92C_RATEMCS2:
+			rtl8723_phy_set_bb_reg(hw, RTXAGC_A_MCS03_MCS00,
+					       MASKBYTE2, power_index);
+			break;
+		case DESC92C_RATEMCS3:
+			rtl8723_phy_set_bb_reg(hw, RTXAGC_A_MCS03_MCS00,
+					       MASKBYTE3, power_index);
+			break;
+		case DESC92C_RATEMCS4:
+			rtl8723_phy_set_bb_reg(hw, RTXAGC_A_MCS07_MCS04,
+					       MASKBYTE0, power_index);
+			break;
+		case DESC92C_RATEMCS5:
+			rtl8723_phy_set_bb_reg(hw, RTXAGC_A_MCS07_MCS04,
+					       MASKBYTE1, power_index);
+			break;
+		case DESC92C_RATEMCS6:
+			rtl8723_phy_set_bb_reg(hw, RTXAGC_A_MCS07_MCS04,
+					       MASKBYTE2, power_index);
+			break;
+		case DESC92C_RATEMCS7:
+			rtl8723_phy_set_bb_reg(hw, RTXAGC_A_MCS07_MCS04,
+					       MASKBYTE3, power_index);
+			break;
+		case DESC92C_RATEMCS8:
+			rtl8723_phy_set_bb_reg(hw, RTXAGC_A_MCS11_MCS08,
+					       MASKBYTE0, power_index);
+			break;
+		case DESC92C_RATEMCS9:
+			rtl8723_phy_set_bb_reg(hw, RTXAGC_A_MCS11_MCS08,
+					       MASKBYTE1, power_index);
+			break;
+		case DESC92C_RATEMCS10:
+			rtl8723_phy_set_bb_reg(hw, RTXAGC_A_MCS11_MCS08,
+					       MASKBYTE2, power_index);
+			break;
+		case DESC92C_RATEMCS11:
+			rtl8723_phy_set_bb_reg(hw, RTXAGC_A_MCS11_MCS08,
+					       MASKBYTE3, power_index);
+			break;
+		default:
+			RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+				 "Invalid Rate!!\n");
+			break;
+		}
+	} else {
+		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD, "Invalid RFPath!!\n");
+	}
+}
+
+void rtl8723be_phy_set_txpower_level(struct ieee80211_hw *hw, u8 channel)
+{
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	u8 cck_rates[]  = {DESC92C_RATE1M, DESC92C_RATE2M,
+			   DESC92C_RATE5_5M, DESC92C_RATE11M};
+	u8 ofdm_rates[]  = {DESC92C_RATE6M, DESC92C_RATE9M,
+			    DESC92C_RATE12M, DESC92C_RATE18M,
+			    DESC92C_RATE24M, DESC92C_RATE36M,
+			    DESC92C_RATE48M, DESC92C_RATE54M};
+	u8 ht_rates_1t[]  = {DESC92C_RATEMCS0, DESC92C_RATEMCS1,
+			     DESC92C_RATEMCS2, DESC92C_RATEMCS3,
+			     DESC92C_RATEMCS4, DESC92C_RATEMCS5,
+			     DESC92C_RATEMCS6, DESC92C_RATEMCS7};
+	u8 i, size;
+	u8 power_index;
+
+	if (!rtlefuse->txpwr_fromeprom)
+		return;
+
+	size = sizeof(cck_rates) / sizeof(u8);
+	for (i = 0; i < size; i++) {
+		power_index = _rtl8723be_get_txpower_index(hw, RF90_PATH_A,
+					cck_rates[i],
+					rtl_priv(hw)->phy.current_chan_bw,
+					channel);
+		_rtl8723be_phy_set_txpower_index(hw, power_index, RF90_PATH_A,
+						 cck_rates[i]);
+	}
+	size = sizeof(ofdm_rates) / sizeof(u8);
+	for (i = 0; i < size; i++) {
+		power_index = _rtl8723be_get_txpower_index(hw, RF90_PATH_A,
+					ofdm_rates[i],
+					rtl_priv(hw)->phy.current_chan_bw,
+					channel);
+		_rtl8723be_phy_set_txpower_index(hw, power_index, RF90_PATH_A,
+						 ofdm_rates[i]);
+	}
+	size = sizeof(ht_rates_1t) / sizeof(u8);
+	for (i = 0; i < size; i++) {
+		power_index = _rtl8723be_get_txpower_index(hw, RF90_PATH_A,
+					ht_rates_1t[i],
+					rtl_priv(hw)->phy.current_chan_bw,
+					channel);
+		_rtl8723be_phy_set_txpower_index(hw, power_index, RF90_PATH_A,
+						 ht_rates_1t[i]);
+	}
+}
+
+void rtl8723be_phy_scan_operation_backup(struct ieee80211_hw *hw, u8 operation)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	enum io_type iotype;
+
+	if (!is_hal_stop(rtlhal)) {
+		switch (operation) {
+		case SCAN_OPT_BACKUP:
+			iotype = IO_CMD_PAUSE_DM_BY_SCAN;
+			rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_IO_CMD,
+						      (u8 *)&iotype);
+			break;
+		case SCAN_OPT_RESTORE:
+			iotype = IO_CMD_RESUME_DM_BY_SCAN;
+			rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_IO_CMD,
+						      (u8 *)&iotype);
+			break;
+		default:
+			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+				 "Unknown Scan Backup operation.\n");
+			break;
+		}
+	}
+}
+
+void rtl8723be_phy_set_bw_mode_callback(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	u8 reg_bw_opmode;
+	u8 reg_prsr_rsc;
+
+	RT_TRACE(rtlpriv, COMP_SCAN, DBG_TRACE,
+		 "Switch to %s bandwidth\n",
+		 rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20 ?
+		 "20MHz" : "40MHz");
+
+	if (is_hal_stop(rtlhal)) {
+		rtlphy->set_bwmode_inprogress = false;
+		return;
+	}
+
+	reg_bw_opmode = rtl_read_byte(rtlpriv, REG_BWOPMODE);
+	reg_prsr_rsc = rtl_read_byte(rtlpriv, REG_RRSR + 2);
+
+	switch (rtlphy->current_chan_bw) {
+	case HT_CHANNEL_WIDTH_20:
+		reg_bw_opmode |= BW_OPMODE_20MHZ;
+		rtl_write_byte(rtlpriv, REG_BWOPMODE, reg_bw_opmode);
+		break;
+	case HT_CHANNEL_WIDTH_20_40:
+		reg_bw_opmode &= ~BW_OPMODE_20MHZ;
+		rtl_write_byte(rtlpriv, REG_BWOPMODE, reg_bw_opmode);
+		reg_prsr_rsc = (reg_prsr_rsc & 0x90) |
+			       (mac->cur_40_prime_sc << 5);
+		rtl_write_byte(rtlpriv, REG_RRSR + 2, reg_prsr_rsc);
+		break;
+	default:
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+		break;
+	}
+
+	switch (rtlphy->current_chan_bw) {
+	case HT_CHANNEL_WIDTH_20:
+		rtl_set_bbreg(hw, RFPGA0_RFMOD, BRFMOD, 0x0);
+		rtl_set_bbreg(hw, RFPGA1_RFMOD, BRFMOD, 0x0);
+		break;
+	case HT_CHANNEL_WIDTH_20_40:
+		rtl_set_bbreg(hw, RFPGA0_RFMOD, BRFMOD, 0x1);
+		rtl_set_bbreg(hw, RFPGA1_RFMOD, BRFMOD, 0x1);
+		rtl_set_bbreg(hw, RCCK0_SYSTEM, BCCK_SIDEBAND,
+			      (mac->cur_40_prime_sc >> 1));
+		rtl_set_bbreg(hw, ROFDM1_LSTF, 0xC00, mac->cur_40_prime_sc);
+		rtl_set_bbreg(hw, 0x818, (BIT(26) | BIT(27)),
+			      (mac->cur_40_prime_sc ==
+			       HAL_PRIME_CHNL_OFFSET_LOWER) ? 2 : 1);
+		break;
+	default:
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+		break;
+	}
+	rtl8723be_phy_rf6052_set_bandwidth(hw, rtlphy->current_chan_bw);
+	rtlphy->set_bwmode_inprogress = false;
+	RT_TRACE(rtlpriv, COMP_SCAN, DBG_LOUD, "\n");
+}
+
+void rtl8723be_phy_set_bw_mode(struct ieee80211_hw *hw,
+			    enum nl80211_channel_type ch_type)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	u8 tmp_bw = rtlphy->current_chan_bw;
+
+	if (rtlphy->set_bwmode_inprogress)
+		return;
+	rtlphy->set_bwmode_inprogress = true;
+	if ((!is_hal_stop(rtlhal)) && !(RT_CANNOT_IO(hw))) {
+		rtl8723be_phy_set_bw_mode_callback(hw);
+	} else {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+			 "false driver sleep or unload\n");
+		rtlphy->set_bwmode_inprogress = false;
+		rtlphy->current_chan_bw = tmp_bw;
+	}
+}
+
+void rtl8723be_phy_sw_chnl_callback(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	u32 delay;
+
+	RT_TRACE(rtlpriv, COMP_SCAN, DBG_TRACE,
+		 "switch to channel%d\n", rtlphy->current_channel);
+	if (is_hal_stop(rtlhal))
+		return;
+	do {
+		if (!rtlphy->sw_chnl_inprogress)
+			break;
+		if (!rtl8723be_phy_sw_chn_step_by_step(hw,
+						       rtlphy->current_channel,
+						       &rtlphy->sw_chnl_stage,
+						       &rtlphy->sw_chnl_step,
+						       &delay)) {
+			if (delay > 0)
+				mdelay(delay);
+			else
+				continue;
+		} else {
+			rtlphy->sw_chnl_inprogress = false;
+		}
+		break;
+	} while (true);
+	RT_TRACE(rtlpriv, COMP_SCAN, DBG_TRACE, "\n");
+}
+
+u8 rtl8723be_phy_sw_chnl(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+
+	if (rtlphy->sw_chnl_inprogress)
+		return 0;
+	if (rtlphy->set_bwmode_inprogress)
+		return 0;
+	RT_ASSERT((rtlphy->current_channel <= 14),
+		  "WIRELESS_MODE_G but channel>14");
+	rtlphy->sw_chnl_inprogress = true;
+	rtlphy->sw_chnl_stage = 0;
+	rtlphy->sw_chnl_step = 0;
+	if (!(is_hal_stop(rtlhal)) && !(RT_CANNOT_IO(hw))) {
+		rtl8723be_phy_sw_chnl_callback(hw);
+		RT_TRACE(rtlpriv, COMP_CHAN, DBG_LOUD,
+			 "sw_chnl_inprogress false schdule "
+			  "workitem current channel %d\n",
+			  rtlphy->current_channel);
+		rtlphy->sw_chnl_inprogress = false;
+	} else {
+		RT_TRACE(rtlpriv, COMP_CHAN, DBG_LOUD,
+			 "sw_chnl_inprogress false driver sleep or"
+			  " unload\n");
+		rtlphy->sw_chnl_inprogress = false;
+	}
+	return 1;
+}
+
+static bool rtl8723be_phy_sw_chn_step_by_step(struct ieee80211_hw *hw,
+					      u8 channel, u8 *stage,
+					      u8 *step, u32 *delay)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct swchnlcmd precommoncmd[MAX_PRECMD_CNT];
+	u32 precommoncmdcnt;
+	struct swchnlcmd postcommoncmd[MAX_POSTCMD_CNT];
+	u32 postcommoncmdcnt;
+	struct swchnlcmd rfdependcmd[MAX_RFDEPENDCMD_CNT];
+	u32 rfdependcmdcnt;
+	struct swchnlcmd *currentcmd = NULL;
+	u8 rfpath;
+	u8 num_total_rfpath = rtlphy->num_total_rfpath;
+
+	precommoncmdcnt = 0;
+	rtl8723_phy_set_sw_chnl_cmdarray(precommoncmd, precommoncmdcnt++,
+					 MAX_PRECMD_CNT,
+					 CMDID_SET_TXPOWEROWER_LEVEL,
+					 0, 0, 0);
+	rtl8723_phy_set_sw_chnl_cmdarray(precommoncmd, precommoncmdcnt++,
+					 MAX_PRECMD_CNT, CMDID_END, 0, 0, 0);
+	postcommoncmdcnt = 0;
+	rtl8723_phy_set_sw_chnl_cmdarray(postcommoncmd, postcommoncmdcnt++,
+					 MAX_POSTCMD_CNT, CMDID_END,
+					 0, 0, 0);
+	rfdependcmdcnt = 0;
+
+	RT_ASSERT((channel >= 1 && channel <= 14),
+		  "illegal channel for Zebra: %d\n", channel);
+
+	rtl8723_phy_set_sw_chnl_cmdarray(rfdependcmd, rfdependcmdcnt++,
+					 MAX_RFDEPENDCMD_CNT,
+					 CMDID_RF_WRITEREG,
+					 RF_CHNLBW, channel, 10);
+
+	rtl8723_phy_set_sw_chnl_cmdarray(rfdependcmd, rfdependcmdcnt++,
+					 MAX_RFDEPENDCMD_CNT,
+					 CMDID_END, 0, 0, 0);
+
+	do {
+		switch (*stage) {
+		case 0:
+			currentcmd = &precommoncmd[*step];
+			break;
+		case 1:
+			currentcmd = &rfdependcmd[*step];
+			break;
+		case 2:
+			currentcmd = &postcommoncmd[*step];
+			break;
+		}
+
+		if (currentcmd->cmdid == CMDID_END) {
+			if ((*stage) == 2) {
+				return true;
+			} else {
+				(*stage)++;
+				(*step) = 0;
+				continue;
+			}
+		}
+
+		switch (currentcmd->cmdid) {
+		case CMDID_SET_TXPOWEROWER_LEVEL:
+			rtl8723be_phy_set_txpower_level(hw, channel);
+			break;
+		case CMDID_WRITEPORT_ULONG:
+			rtl_write_dword(rtlpriv, currentcmd->para1,
+					currentcmd->para2);
+			break;
+		case CMDID_WRITEPORT_USHORT:
+			rtl_write_word(rtlpriv, currentcmd->para1,
+				       (u16) currentcmd->para2);
+			break;
+		case CMDID_WRITEPORT_UCHAR:
+			rtl_write_byte(rtlpriv, currentcmd->para1,
+				       (u8) currentcmd->para2);
+			break;
+		case CMDID_RF_WRITEREG:
+			for (rfpath = 0; rfpath < num_total_rfpath; rfpath++) {
+				rtlphy->rfreg_chnlval[rfpath] =
+				    ((rtlphy->rfreg_chnlval[rfpath] &
+				      0xfffffc00) | currentcmd->para2);
+
+				rtl_set_rfreg(hw, (enum radio_path)rfpath,
+					      currentcmd->para1,
+					      RFREG_OFFSET_MASK,
+					      rtlphy->rfreg_chnlval[rfpath]);
+			}
+			break;
+		default:
+			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+				 "switch case not process\n");
+			break;
+		}
+
+		break;
+	} while (true);
+
+	(*delay) = currentcmd->msdelay;
+	(*step)++;
+	return false;
+}
+
+static u8 _rtl8723be_phy_path_a_iqk(struct ieee80211_hw *hw, bool config_pathb)
+{
+	u32 reg_eac, reg_e94, reg_e9c, reg_ea4;
+	u8 result = 0x00;
+
+	rtl_set_bbreg(hw, 0xe30, MASKDWORD, 0x10008c1c);
+	rtl_set_bbreg(hw, 0xe34, MASKDWORD, 0x30008c1c);
+	rtl_set_bbreg(hw, 0xe38, MASKDWORD, 0x8214032a);
+	rtl_set_bbreg(hw, 0xe3c, MASKDWORD, 0x28160000);
+
+	rtl_set_bbreg(hw, 0xe4c, MASKDWORD, 0x00462911);
+	rtl_set_bbreg(hw, 0xe48, MASKDWORD, 0xf9000000);
+	rtl_set_bbreg(hw, 0xe48, MASKDWORD, 0xf8000000);
+
+	mdelay(IQK_DELAY_TIME);
+
+	reg_eac = rtl_get_bbreg(hw, 0xeac, MASKDWORD);
+	reg_e94 = rtl_get_bbreg(hw, 0xe94, MASKDWORD);
+	reg_e9c = rtl_get_bbreg(hw, 0xe9c, MASKDWORD);
+	reg_ea4 = rtl_get_bbreg(hw, 0xea4, MASKDWORD);
+
+	if (!(reg_eac & BIT(28)) &&
+	    (((reg_e94 & 0x03FF0000) >> 16) != 0x142) &&
+	    (((reg_e9c & 0x03FF0000) >> 16) != 0x42))
+		result |= 0x01;
+	return result;
+}
+
+static bool phy_similarity_cmp(struct ieee80211_hw *hw, long result[][8],
+			       u8 c1, u8 c2)
+{
+	u32 i, j, diff, simularity_bitmap, bound;
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+
+	u8 final_candidate[2] = { 0xFF, 0xFF };
+	bool bresult = true, is2t = IS_92C_SERIAL(rtlhal->version);
+
+	if (is2t)
+		bound = 8;
+	else
+		bound = 4;
+
+	simularity_bitmap = 0;
+
+	for (i = 0; i < bound; i++) {
+		diff = (result[c1][i] > result[c2][i]) ?
+		    (result[c1][i] - result[c2][i]) :
+		    (result[c2][i] - result[c1][i]);
+
+		if (diff > MAX_TOLERANCE) {
+			if ((i == 2 || i == 6) && !simularity_bitmap) {
+				if (result[c1][i] + result[c1][i + 1] == 0)
+					final_candidate[(i / 4)] = c2;
+				else if (result[c2][i] + result[c2][i + 1] == 0)
+					final_candidate[(i / 4)] = c1;
+				else
+					simularity_bitmap |= (1 << i);
+			} else {
+				simularity_bitmap |= (1 << i);
+			}
+		}
+	}
+
+	if (simularity_bitmap == 0) {
+		for (i = 0; i < (bound / 4); i++) {
+			if (final_candidate[i] != 0xFF) {
+				for (j = i * 4; j < (i + 1) * 4 - 2; j++)
+					result[3][j] =
+						result[final_candidate[i]][j];
+				bresult = false;
+			}
+		}
+		return bresult;
+	} else if (!(simularity_bitmap & 0x0F)) {
+		for (i = 0; i < 4; i++)
+			result[3][i] = result[c1][i];
+		return false;
+	} else if (!(simularity_bitmap & 0xF0) && is2t) {
+		for (i = 4; i < 8; i++)
+			result[3][i] = result[c1][i];
+		return false;
+	} else {
+		return false;
+	}
+}
+
+static void _rtl8723be_phy_iq_calibrate(struct ieee80211_hw *hw,
+					long result[][8], u8 t, bool is2t)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	u32 i;
+	u8 patha_ok;
+	u32 adda_reg[IQK_ADDA_REG_NUM] = {
+		0x85c, 0xe6c, 0xe70, 0xe74,
+		0xe78, 0xe7c, 0xe80, 0xe84,
+		0xe88, 0xe8c, 0xed0, 0xed4,
+		0xed8, 0xedc, 0xee0, 0xeec
+	};
+
+	u32 iqk_mac_reg[IQK_MAC_REG_NUM] = {
+		0x522, 0x550, 0x551, 0x040
+	};
+	u32 iqk_bb_reg[IQK_BB_REG_NUM] = {
+		ROFDM0_TRXPATHENABLE, ROFDM0_TRMUXPAR,
+		RFPGA0_XCD_RFINTERFACESW, 0xb68, 0xb6c,
+		0x870, 0x860,
+		0x864, 0x800
+	};
+	const u32 retrycount = 2;
+	u32 path_sel_bb, path_sel_rf;
+	u8 tmp_reg_c50, tmp_reg_c58;
+
+	tmp_reg_c50 = rtl_get_bbreg(hw, 0xc50, MASKBYTE0);
+	tmp_reg_c58 = rtl_get_bbreg(hw, 0xc58, MASKBYTE0);
+
+	if (t == 0) {
+		rtl8723_save_adda_registers(hw, adda_reg,
+					    rtlphy->adda_backup, 16);
+		rtl8723_phy_save_mac_registers(hw, iqk_mac_reg,
+					       rtlphy->iqk_mac_backup);
+		rtl8723_save_adda_registers(hw, iqk_bb_reg,
+					    rtlphy->iqk_bb_backup,
+					    IQK_BB_REG_NUM);
+	}
+	rtl8723_phy_path_adda_on(hw, adda_reg, true, is2t);
+	if (t == 0) {
+		rtlphy->rfpi_enable = (u8) rtl_get_bbreg(hw,
+						RFPGA0_XA_HSSIPARAMETER1,
+						BIT(8));
+	}
+	if (!rtlphy->rfpi_enable)
+		rtl8723_phy_pi_mode_switch(hw, true);
+
+	path_sel_bb = rtl_get_bbreg(hw, 0x948, MASKDWORD);
+	path_sel_rf = rtl_get_rfreg(hw, RF90_PATH_A, 0xb0, 0xfffff);
+
+	/*BB Setting*/
+	rtl_set_bbreg(hw, 0x800, BIT(24), 0x00);
+	rtl_set_bbreg(hw, 0xc04, MASKDWORD, 0x03a05600);
+	rtl_set_bbreg(hw, 0xc08, MASKDWORD, 0x000800e4);
+	rtl_set_bbreg(hw, 0x874, MASKDWORD, 0x22204000);
+
+	rtl_set_bbreg(hw, 0x870, BIT(10), 0x01);
+	rtl_set_bbreg(hw, 0x870, BIT(26), 0x01);
+	rtl_set_bbreg(hw, 0x860, BIT(10), 0x00);
+	rtl_set_bbreg(hw, 0x864, BIT(10), 0x00);
+
+	if (is2t)
+		rtl_set_rfreg(hw, RF90_PATH_B, 0x00, MASKDWORD, 0x10000);
+	rtl8723_phy_mac_setting_calibration(hw, iqk_mac_reg,
+					    rtlphy->iqk_mac_backup);
+	rtl_set_bbreg(hw, 0xb68, MASKDWORD, 0x0f600000);
+
+	rtl_set_bbreg(hw, 0xe28, MASKDWORD, 0x80800000);
+	rtl_set_bbreg(hw, 0xe40, MASKDWORD, 0x01007c00);
+	rtl_set_bbreg(hw, 0xe44, MASKDWORD, 0x81004800);
+	for (i = 0; i < retrycount; i++) {
+		patha_ok = _rtl8723be_phy_path_a_iqk(hw, is2t);
+		if (patha_ok == 0x01) {
+			RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+				 "Path A Tx IQK Success!!\n");
+			result[t][0] = (rtl_get_bbreg(hw, 0xe94, MASKDWORD) &
+					0x3FF0000) >> 16;
+			result[t][1] = (rtl_get_bbreg(hw, 0xe9c, MASKDWORD) &
+					0x3FF0000) >> 16;
+			break;
+		}
+	}
+
+	if (0 == patha_ok)
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+			 "Path A IQK Success!!\n");
+	if (is2t) {
+		rtl8723_phy_path_a_standby(hw);
+		rtl8723_phy_path_adda_on(hw, adda_reg, false, is2t);
+	}
+
+	rtl_set_bbreg(hw, 0xe28, MASKDWORD, 0);
+
+	if (t != 0) {
+		if (!rtlphy->rfpi_enable)
+			rtl8723_phy_pi_mode_switch(hw, false);
+		rtl8723_phy_reload_adda_registers(hw, adda_reg,
+						  rtlphy->adda_backup, 16);
+		rtl8723_phy_reload_mac_registers(hw, iqk_mac_reg,
+						 rtlphy->iqk_mac_backup);
+		rtl8723_phy_reload_adda_registers(hw, iqk_bb_reg,
+						  rtlphy->iqk_bb_backup,
+						  IQK_BB_REG_NUM);
+
+		rtl_set_bbreg(hw, 0x948, MASKDWORD, path_sel_bb);
+		rtl_set_rfreg(hw, RF90_PATH_B, 0xb0, 0xfffff, path_sel_rf);
+
+		rtl_set_bbreg(hw, 0xc50, MASKBYTE0, 0x50);
+		rtl_set_bbreg(hw, 0xc50, MASKBYTE0, tmp_reg_c50);
+		if (is2t) {
+			rtl_set_bbreg(hw, 0xc58, MASKBYTE0, 0x50);
+			rtl_set_bbreg(hw, 0xc58, MASKBYTE0, tmp_reg_c58);
+		}
+		rtl_set_bbreg(hw, 0xe30, MASKDWORD, 0x01008c00);
+		rtl_set_bbreg(hw, 0xe34, MASKDWORD, 0x01008c00);
+	}
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "8723be IQK Finish!!\n");
+}
+
+static void _rtl8723be_phy_lc_calibrate(struct ieee80211_hw *hw, bool is2t)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8 tmpreg;
+	u32 rf_a_mode = 0, rf_b_mode = 0, lc_cal;
+
+	tmpreg = rtl_read_byte(rtlpriv, 0xd03);
+
+	if ((tmpreg & 0x70) != 0)
+		rtl_write_byte(rtlpriv, 0xd03, tmpreg & 0x8F);
+	else
+		rtl_write_byte(rtlpriv, REG_TXPAUSE, 0xFF);
+
+	if ((tmpreg & 0x70) != 0) {
+		rf_a_mode = rtl_get_rfreg(hw, RF90_PATH_A, 0x00, MASK12BITS);
+
+		if (is2t)
+			rf_b_mode = rtl_get_rfreg(hw, RF90_PATH_B, 0x00,
+						  MASK12BITS);
+
+		rtl_set_rfreg(hw, RF90_PATH_A, 0x00, MASK12BITS,
+			      (rf_a_mode & 0x8FFFF) | 0x10000);
+
+		if (is2t)
+			rtl_set_rfreg(hw, RF90_PATH_B, 0x00, MASK12BITS,
+				      (rf_b_mode & 0x8FFFF) | 0x10000);
+	}
+	lc_cal = rtl_get_rfreg(hw, RF90_PATH_A, 0x18, MASK12BITS);
+
+	rtl_set_rfreg(hw, RF90_PATH_A, 0xb0, RFREG_OFFSET_MASK, 0xdfbe0);
+	rtl_set_rfreg(hw, RF90_PATH_A, 0x18, MASK12BITS, 0x8c0a);
+
+	mdelay(100);
+
+	rtl_set_rfreg(hw, RF90_PATH_A, 0xb0, RFREG_OFFSET_MASK, 0xdffe0);
+
+	if ((tmpreg & 0x70) != 0) {
+		rtl_write_byte(rtlpriv, 0xd03, tmpreg);
+		rtl_set_rfreg(hw, RF90_PATH_A, 0x00, MASK12BITS, rf_a_mode);
+
+		if (is2t)
+			rtl_set_rfreg(hw, RF90_PATH_B, 0x00,
+				      MASK12BITS, rf_b_mode);
+	} else {
+		rtl_write_byte(rtlpriv, REG_TXPAUSE, 0x00);
+	}
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "\n");
+}
+
+static void _rtl8723be_phy_set_rfpath_switch(struct ieee80211_hw *hw,
+					     bool bmain, bool is2t)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "\n");
+
+	if (is_hal_stop(rtlhal)) {
+		u8 u1btmp;
+		u1btmp = rtl_read_byte(rtlpriv, REG_LEDCFG0);
+		rtl_write_byte(rtlpriv, REG_LEDCFG0, u1btmp | BIT(7));
+		rtl_set_bbreg(hw, RFPGA0_XAB_RFPARAMETER, BIT(13), 0x01);
+	}
+	if (is2t) {
+		if (bmain)
+			rtl_set_bbreg(hw, RFPGA0_XB_RFINTERFACEOE,
+				      BIT(5) | BIT(6), 0x1);
+		else
+			rtl_set_bbreg(hw, RFPGA0_XB_RFINTERFACEOE,
+				      BIT(5) | BIT(6), 0x2);
+	} else {
+		rtl_set_bbreg(hw, RFPGA0_XAB_RFINTERFACESW, BIT(8) | BIT(9), 0);
+		rtl_set_bbreg(hw, 0x914, MASKLWORD, 0x0201);
+
+		/* We use the RF definition of MAIN and AUX,
+		 * left antenna and right antenna repectively.
+		 * Default output at AUX.
+		 */
+		if (bmain) {
+			rtl_set_bbreg(hw, RFPGA0_XA_RFINTERFACEOE,
+				      BIT(14) | BIT(13) | BIT(12), 0);
+			rtl_set_bbreg(hw, RFPGA0_XB_RFINTERFACEOE,
+				      BIT(5) | BIT(4) | BIT(3), 0);
+			if (rtlefuse->antenna_div_type == CGCS_RX_HW_ANTDIV)
+				rtl_set_bbreg(hw, CONFIG_RAM64X16, BIT(31), 0);
+		} else {
+			rtl_set_bbreg(hw, RFPGA0_XA_RFINTERFACEOE,
+				      BIT(14) | BIT(13) | BIT(12), 1);
+			rtl_set_bbreg(hw, RFPGA0_XB_RFINTERFACEOE,
+				      BIT(5) | BIT(4) | BIT(3), 1);
+			if (rtlefuse->antenna_div_type == CGCS_RX_HW_ANTDIV)
+				rtl_set_bbreg(hw, CONFIG_RAM64X16, BIT(31), 1);
+		}
+	}
+}
+
+#undef IQK_ADDA_REG_NUM
+#undef IQK_DELAY_TIME
+
+void rtl8723be_phy_iq_calibrate(struct ieee80211_hw *hw, bool recovery)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	long result[4][8];
+	u8 i, final_candidate;
+	bool patha_ok, pathb_ok;
+	long reg_e94, reg_e9c, reg_ea4, reg_eac, reg_eb4, reg_ebc, reg_ec4,
+	    reg_ecc, reg_tmp = 0;
+	bool is12simular, is13simular, is23simular;
+	u32 iqk_bb_reg[9] = {
+		ROFDM0_XARXIQIMBALANCE,
+		ROFDM0_XBRXIQIMBALANCE,
+		ROFDM0_ECCATHRESHOLD,
+		ROFDM0_AGCRSSITABLE,
+		ROFDM0_XATXIQIMBALANCE,
+		ROFDM0_XBTXIQIMBALANCE,
+		ROFDM0_XCTXAFE,
+		ROFDM0_XDTXAFE,
+		ROFDM0_RXIQEXTANTA
+	};
+
+	if (recovery) {
+		rtl8723_phy_reload_adda_registers(hw, iqk_bb_reg,
+						  rtlphy->iqk_bb_backup, 9);
+		return;
+	}
+
+	for (i = 0; i < 8; i++) {
+		result[0][i] = 0;
+		result[1][i] = 0;
+		result[2][i] = 0;
+		result[3][i] = 0;
+	}
+	final_candidate = 0xff;
+	patha_ok = false;
+	pathb_ok = false;
+	is12simular = false;
+	is23simular = false;
+	is13simular = false;
+	for (i = 0; i < 3; i++) {
+		if (get_rf_type(rtlphy) == RF_2T2R)
+			_rtl8723be_phy_iq_calibrate(hw, result, i, true);
+		else
+			_rtl8723be_phy_iq_calibrate(hw, result, i, false);
+		if (i == 1) {
+			is12simular = phy_similarity_cmp(hw, result, 0, 1);
+			if (is12simular) {
+				final_candidate = 0;
+				break;
+			}
+		}
+		if (i == 2) {
+			is13simular = phy_similarity_cmp(hw, result, 0, 2);
+			if (is13simular) {
+				final_candidate = 0;
+				break;
+			}
+			is23simular = phy_similarity_cmp(hw, result, 1, 2);
+			if (is23simular) {
+				final_candidate = 1;
+			} else {
+				for (i = 0; i < 8; i++)
+					reg_tmp += result[3][i];
+
+				if (reg_tmp != 0)
+					final_candidate = 3;
+				else
+					final_candidate = 0xFF;
+			}
+		}
+	}
+	for (i = 0; i < 4; i++) {
+		reg_e94 = result[i][0];
+		reg_e9c = result[i][1];
+		reg_ea4 = result[i][2];
+		reg_eac = result[i][3];
+		reg_eb4 = result[i][4];
+		reg_ebc = result[i][5];
+		reg_ec4 = result[i][6];
+		reg_ecc = result[i][7];
+	}
+	if (final_candidate != 0xff) {
+		reg_e94 = result[final_candidate][0];
+		rtlphy->reg_e94 = reg_e94;
+		reg_e9c = result[final_candidate][1];
+		rtlphy->reg_e9c = reg_e9c;
+		reg_ea4 = result[final_candidate][2];
+		reg_eac = result[final_candidate][3];
+		reg_eb4 = result[final_candidate][4];
+		rtlphy->reg_eb4 = reg_eb4;
+		reg_ebc = result[final_candidate][5];
+		rtlphy->reg_ebc = reg_ebc;
+		reg_ec4 = result[final_candidate][6];
+		reg_ecc = result[final_candidate][7];
+		patha_ok = true;
+		pathb_ok = true;
+	} else {
+		rtlphy->reg_e94 = 0x100;
+		rtlphy->reg_eb4 = 0x100;
+		rtlphy->reg_e9c = 0x0;
+		rtlphy->reg_ebc = 0x0;
+	}
+	if (reg_e94 != 0) /*&&(reg_ea4 != 0) */
+		rtl8723_phy_path_a_fill_iqk_matrix(hw, patha_ok, result,
+						   final_candidate,
+						   (reg_ea4 == 0));
+	if (final_candidate != 0xFF) {
+		for (i = 0; i < IQK_MATRIX_REG_NUM; i++)
+			rtlphy->iqk_matrix[0].value[0][i] =
+						result[final_candidate][i];
+		rtlphy->iqk_matrix[0].iqk_done = true;
+	}
+	rtl8723_save_adda_registers(hw, iqk_bb_reg, rtlphy->iqk_bb_backup, 9);
+}
+
+void rtl8723be_phy_lc_calibrate(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_hal *rtlhal = &(rtlpriv->rtlhal);
+	u32 timeout = 2000, timecount = 0;
+
+	while (rtlpriv->mac80211.act_scanning && timecount < timeout) {
+		udelay(50);
+		timecount += 50;
+	}
+
+	rtlphy->lck_inprogress = true;
+	RTPRINT(rtlpriv, FINIT, INIT_EEPROM,
+		"LCK:Start!!! currentband %x delay %d ms\n",
+		rtlhal->current_bandtype, timecount);
+
+	_rtl8723be_phy_lc_calibrate(hw, false);
+
+	rtlphy->lck_inprogress = false;
+}
+
+void rtl23b_phy_ap_calibrate(struct ieee80211_hw *hw, char delta)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+	if (rtlphy->apk_done)
+		return;
+
+	return;
+}
+
+void rtl8723be_phy_set_rfpath_switch(struct ieee80211_hw *hw, bool bmain)
+{
+	_rtl8723be_phy_set_rfpath_switch(hw, bmain, false);
+}
+
+static void rtl8723be_phy_set_io(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+	RT_TRACE(rtlpriv, COMP_CMD, DBG_TRACE,
+		 "--->Cmd(%#x), set_io_inprogress(%d)\n",
+		  rtlphy->current_io_type, rtlphy->set_io_inprogress);
+	switch (rtlphy->current_io_type) {
+	case IO_CMD_RESUME_DM_BY_SCAN:
+		rtlpriv->dm_digtable.cur_igvalue =
+				 rtlphy->initgain_backup.xaagccore1;
+		/*rtl92c_dm_write_dig(hw);*/
+		rtl8723be_phy_set_txpower_level(hw, rtlphy->current_channel);
+		rtl_set_bbreg(hw, RCCK0_CCA, 0xff0000, 0x83);
+		break;
+	case IO_CMD_PAUSE_DM_BY_SCAN:
+		rtlphy->initgain_backup.xaagccore1 =
+				 rtlpriv->dm_digtable.cur_igvalue;
+		rtlpriv->dm_digtable.cur_igvalue = 0x17;
+		rtl_set_bbreg(hw, RCCK0_CCA, 0xff0000, 0x40);
+		break;
+	default:
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 "switch case not process\n");
+		break;
+	}
+	rtlphy->set_io_inprogress = false;
+	RT_TRACE(rtlpriv, COMP_CMD, DBG_TRACE,
+		 "(%#x)\n", rtlphy->current_io_type);
+}
+
+bool rtl8723be_phy_set_io_cmd(struct ieee80211_hw *hw, enum io_type iotype)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	bool postprocessing = false;
+
+	RT_TRACE(rtlpriv, COMP_CMD, DBG_TRACE,
+		 "-->IO Cmd(%#x), set_io_inprogress(%d)\n",
+		  iotype, rtlphy->set_io_inprogress);
+	do {
+		switch (iotype) {
+		case IO_CMD_RESUME_DM_BY_SCAN:
+			RT_TRACE(rtlpriv, COMP_CMD, DBG_TRACE,
+				 "[IO CMD] Resume DM after scan.\n");
+			postprocessing = true;
+			break;
+		case IO_CMD_PAUSE_DM_BY_SCAN:
+			RT_TRACE(rtlpriv, COMP_CMD, DBG_TRACE,
+				 "[IO CMD] Pause DM before scan.\n");
+			postprocessing = true;
+			break;
+		default:
+			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+				 "switch case not process\n");
+			break;
+		}
+	} while (false);
+	if (postprocessing && !rtlphy->set_io_inprogress) {
+		rtlphy->set_io_inprogress = true;
+		rtlphy->current_io_type = iotype;
+	} else {
+		return false;
+	}
+	rtl8723be_phy_set_io(hw);
+	RT_TRACE(rtlpriv, COMP_CMD, DBG_TRACE, "IO Type(%#x)\n", iotype);
+	return true;
+}
+
+static void rtl8723be_phy_set_rf_on(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	rtl_write_byte(rtlpriv, REG_SPS0_CTRL, 0x2b);
+	rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, 0xE3);
+	rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, 0xE2);
+	rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, 0xE3);
+	rtl_write_byte(rtlpriv, REG_TXPAUSE, 0x00);
+}
+
+static void _rtl8723be_phy_set_rf_sleep(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	rtl_write_byte(rtlpriv, REG_TXPAUSE, 0xFF);
+	rtl_set_rfreg(hw, RF90_PATH_A, 0x00, RFREG_OFFSET_MASK, 0x00);
+	rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, 0xE2);
+	rtl_write_byte(rtlpriv, REG_SPS0_CTRL, 0x22);
+}
+
+static bool _rtl8723be_phy_set_rf_power_state(struct ieee80211_hw *hw,
+					      enum rf_pwrstate rfpwr_state)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	bool bresult = true;
+	u8 i, queue_id;
+	struct rtl8192_tx_ring *ring = NULL;
+
+	switch (rfpwr_state) {
+	case ERFON:
+		if ((ppsc->rfpwr_state == ERFOFF) &&
+		    RT_IN_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC)) {
+			bool rtstatus;
+			u32 initialize_count = 0;
+			do {
+				initialize_count++;
+				RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
+					 "IPS Set eRf nic enable\n");
+				rtstatus = rtl_ps_enable_nic(hw);
+			} while (!rtstatus && (initialize_count < 10));
+				RT_CLEAR_PS_LEVEL(ppsc,
+						  RT_RF_OFF_LEVL_HALT_NIC);
+		} else {
+			RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
+				 "Set ERFON sleeped:%d ms\n",
+				  jiffies_to_msecs(jiffies -
+						   ppsc->last_sleep_jiffies));
+			ppsc->last_awake_jiffies = jiffies;
+			rtl8723be_phy_set_rf_on(hw);
+		}
+		if (mac->link_state == MAC80211_LINKED)
+			rtlpriv->cfg->ops->led_control(hw, LED_CTL_LINK);
+		else
+			rtlpriv->cfg->ops->led_control(hw, LED_CTL_NO_LINK);
+		break;
+	case ERFOFF:
+		for (queue_id = 0, i = 0;
+		     queue_id < RTL_PCI_MAX_TX_QUEUE_COUNT;) {
+			ring = &pcipriv->dev.tx_ring[queue_id];
+			if (skb_queue_len(&ring->queue) == 0) {
+				queue_id++;
+				continue;
+			} else {
+				RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+					 "eRf Off/Sleep: %d times "
+					  "TcbBusyQueue[%d] =%d before "
+					  "doze!\n", (i + 1), queue_id,
+					  skb_queue_len(&ring->queue));
+
+				udelay(10);
+				i++;
+			}
+			if (i >= MAX_DOZE_WAITING_TIMES_9x) {
+				RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+					 "\n ERFSLEEP: %d times "
+					  "TcbBusyQueue[%d] = %d !\n",
+					  MAX_DOZE_WAITING_TIMES_9x,
+					  queue_id,
+					  skb_queue_len(&ring->queue));
+				break;
+			}
+		}
+
+		if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_HALT_NIC) {
+			RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
+				 "IPS Set eRf nic disable\n");
+			rtl_ps_disable_nic(hw);
+			RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC);
+		} else {
+			if (ppsc->rfoff_reason == RF_CHANGE_BY_IPS) {
+				rtlpriv->cfg->ops->led_control(hw,
+							       LED_CTL_NO_LINK);
+			} else {
+				rtlpriv->cfg->ops->led_control(hw,
+							     LED_CTL_POWER_OFF);
+			}
+		}
+		break;
+	case ERFSLEEP:
+		if (ppsc->rfpwr_state == ERFOFF)
+			break;
+		for (queue_id = 0, i = 0;
+		     queue_id < RTL_PCI_MAX_TX_QUEUE_COUNT;) {
+			ring = &pcipriv->dev.tx_ring[queue_id];
+			if (skb_queue_len(&ring->queue) == 0) {
+				queue_id++;
+				continue;
+			} else {
+				RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+					 "eRf Off/Sleep: %d times "
+					  "TcbBusyQueue[%d] =%d before "
+					  "doze!\n", (i + 1), queue_id,
+					  skb_queue_len(&ring->queue));
+
+				udelay(10);
+				i++;
+			}
+			if (i >= MAX_DOZE_WAITING_TIMES_9x) {
+				RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+					 "\n ERFSLEEP: %d times "
+					  "TcbBusyQueue[%d] = %d !\n",
+					  MAX_DOZE_WAITING_TIMES_9x,
+					  queue_id,
+					  skb_queue_len(&ring->queue));
+				break;
+			}
+		}
+		RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
+			 "Set ERFSLEEP awaked:%d ms\n",
+			  jiffies_to_msecs(jiffies -
+					   ppsc->last_awake_jiffies));
+		ppsc->last_sleep_jiffies = jiffies;
+		_rtl8723be_phy_set_rf_sleep(hw);
+		break;
+	default:
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 "switch case not process\n");
+		bresult = false;
+		break;
+	}
+	if (bresult)
+		ppsc->rfpwr_state = rfpwr_state;
+	return bresult;
+}
+
+bool rtl8723be_phy_set_rf_power_state(struct ieee80211_hw *hw,
+				      enum rf_pwrstate rfpwr_state)
+{
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+
+	bool bresult = false;
+
+	if (rfpwr_state == ppsc->rfpwr_state)
+		return bresult;
+	bresult = _rtl8723be_phy_set_rf_power_state(hw, rfpwr_state);
+	return bresult;
+}
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/phy.h b/drivers/net/wireless/rtlwifi/rtl8723be/phy.h
new file mode 100644
index 000000000000..444ef95bb6af
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/phy.h
@@ -0,0 +1,217 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2014  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __RTL8723BE_PHY_H__
+#define __RTL8723BE_PHY_H__
+
+/*It must always set to 4, otherwise read efuse table secquence will be wrong.*/
+#define MAX_TX_COUNT		4
+#define	TX_1S			0
+#define	TX_2S			1
+
+#define	MAX_POWER_INDEX		0x3F
+
+#define MAX_PRECMD_CNT			16
+#define MAX_RFDEPENDCMD_CNT		16
+#define MAX_POSTCMD_CNT		16
+
+#define MAX_DOZE_WAITING_TIMES_9x	64
+
+#define RT_CANNOT_IO(hw)		false
+#define HIGHPOWER_RADIOA_ARRAYLEN	22
+
+#define IQK_ADDA_REG_NUM		16
+#define IQK_BB_REG_NUM			9
+#define MAX_TOLERANCE			5
+#define	IQK_DELAY_TIME			10
+#define	index_mapping_NUM		15
+
+#define	APK_BB_REG_NUM			5
+#define	APK_AFE_REG_NUM			16
+#define	APK_CURVE_REG_NUM		4
+#define	PATH_NUM			1
+
+#define LOOP_LIMIT			5
+#define MAX_STALL_TIME			50
+#define ANTENNADIVERSITYVALUE		0x80
+#define MAX_TXPWR_IDX_NMODE_92S		63
+#define RESET_CNT_LIMIT			3
+
+#define IQK_ADDA_REG_NUM		16
+#define IQK_MAC_REG_NUM			4
+
+#define RF6052_MAX_PATH			2
+
+#define CT_OFFSET_MAC_ADDR		0X16
+
+#define CT_OFFSET_CCK_TX_PWR_IDX		0x5A
+#define CT_OFFSET_HT401S_TX_PWR_IDX		0x60
+#define CT_OFFSET_HT402S_TX_PWR_IDX_DIFF	0x66
+#define CT_OFFSET_HT20_TX_PWR_IDX_DIFF		0x69
+#define CT_OFFSET_OFDM_TX_PWR_IDX_DIFF		0x6C
+
+#define CT_OFFSET_HT40_MAX_PWR_OFFSET		0x6F
+#define CT_OFFSET_HT20_MAX_PWR_OFFSET		0x72
+
+#define CT_OFFSET_CHANNEL_PLAH			0x75
+#define CT_OFFSET_THERMAL_METER			0x78
+#define CT_OFFSET_RF_OPTION			0x79
+#define CT_OFFSET_VERSION			0x7E
+#define CT_OFFSET_CUSTOMER_ID			0x7F
+
+#define RTL92C_MAX_PATH_NUM			2
+
+enum hw90_block_e {
+	HW90_BLOCK_MAC = 0,
+	HW90_BLOCK_PHY0 = 1,
+	HW90_BLOCK_PHY1 = 2,
+	HW90_BLOCK_RF = 3,
+	HW90_BLOCK_MAXIMUM = 4,
+};
+
+enum baseband_config_type {
+	BASEBAND_CONFIG_PHY_REG = 0,
+	BASEBAND_CONFIG_AGC_TAB = 1,
+};
+
+enum ra_offset_area {
+	RA_OFFSET_LEGACY_OFDM1,
+	RA_OFFSET_LEGACY_OFDM2,
+	RA_OFFSET_HT_OFDM1,
+	RA_OFFSET_HT_OFDM2,
+	RA_OFFSET_HT_OFDM3,
+	RA_OFFSET_HT_OFDM4,
+	RA_OFFSET_HT_CCK,
+};
+
+enum antenna_path {
+	ANTENNA_NONE,
+	ANTENNA_D,
+	ANTENNA_C,
+	ANTENNA_CD,
+	ANTENNA_B,
+	ANTENNA_BD,
+	ANTENNA_BC,
+	ANTENNA_BCD,
+	ANTENNA_A,
+	ANTENNA_AD,
+	ANTENNA_AC,
+	ANTENNA_ACD,
+	ANTENNA_AB,
+	ANTENNA_ABD,
+	ANTENNA_ABC,
+	ANTENNA_ABCD
+};
+
+struct r_antenna_select_ofdm {
+	u32 r_tx_antenna:4;
+	u32 r_ant_l:4;
+	u32 r_ant_non_ht:4;
+	u32 r_ant_ht1:4;
+	u32 r_ant_ht2:4;
+	u32 r_ant_ht_s1:4;
+	u32 r_ant_non_ht_s1:4;
+	u32 ofdm_txsc:2;
+	u32 reserved:2;
+};
+
+struct r_antenna_select_cck {
+	u8 r_cckrx_enable_2:2;
+	u8 r_cckrx_enable:2;
+	u8 r_ccktx_enable:4;
+};
+
+
+struct efuse_contents {
+	u8 mac_addr[ETH_ALEN];
+	u8 cck_tx_power_idx[6];
+	u8 ht40_1s_tx_power_idx[6];
+	u8 ht40_2s_tx_power_idx_diff[3];
+	u8 ht20_tx_power_idx_diff[3];
+	u8 ofdm_tx_power_idx_diff[3];
+	u8 ht40_max_power_offset[3];
+	u8 ht20_max_power_offset[3];
+	u8 channel_plan;
+	u8 thermal_meter;
+	u8 rf_option[5];
+	u8 version;
+	u8 oem_id;
+	u8 regulatory;
+};
+
+struct tx_power_struct {
+	u8 cck[RTL92C_MAX_PATH_NUM][CHANNEL_MAX_NUMBER];
+	u8 ht40_1s[RTL92C_MAX_PATH_NUM][CHANNEL_MAX_NUMBER];
+	u8 ht40_2s[RTL92C_MAX_PATH_NUM][CHANNEL_MAX_NUMBER];
+	u8 ht20_diff[RTL92C_MAX_PATH_NUM][CHANNEL_MAX_NUMBER];
+	u8 legacy_ht_diff[RTL92C_MAX_PATH_NUM][CHANNEL_MAX_NUMBER];
+	u8 legacy_ht_txpowerdiff;
+	u8 groupht20[RTL92C_MAX_PATH_NUM][CHANNEL_MAX_NUMBER];
+	u8 groupht40[RTL92C_MAX_PATH_NUM][CHANNEL_MAX_NUMBER];
+	u8 pwrgroup_cnt;
+	u32 mcs_original_offset[4][16];
+};
+
+enum _ANT_DIV_TYPE {
+	NO_ANTDIV				= 0xFF,
+	CG_TRX_HW_ANTDIV		= 0x01,
+	CGCS_RX_HW_ANTDIV		= 0x02,
+	FIXED_HW_ANTDIV         = 0x03,
+	CG_TRX_SMART_ANTDIV		= 0x04,
+	CGCS_RX_SW_ANTDIV		= 0x05,
+};
+
+u32 rtl8723be_phy_query_rf_reg(struct ieee80211_hw *hw,
+			       enum radio_path rfpath,
+			       u32 regaddr, u32 bitmask);
+void rtl8723be_phy_set_rf_reg(struct ieee80211_hw *hw,
+			      enum radio_path rfpath,
+			      u32 regaddr, u32 bitmask, u32 data);
+bool rtl8723be_phy_mac_config(struct ieee80211_hw *hw);
+bool rtl8723be_phy_bb_config(struct ieee80211_hw *hw);
+bool rtl8723be_phy_rf_config(struct ieee80211_hw *hw);
+void rtl8723be_phy_get_hw_reg_originalvalue(struct ieee80211_hw *hw);
+void rtl8723be_phy_get_txpower_level(struct ieee80211_hw *hw,
+				     long *powerlevel);
+void rtl8723be_phy_set_txpower_level(struct ieee80211_hw *hw,
+				     u8 channel);
+void rtl8723be_phy_scan_operation_backup(struct ieee80211_hw *hw,
+					 u8 operation);
+void rtl8723be_phy_set_bw_mode_callback(struct ieee80211_hw *hw);
+void rtl8723be_phy_set_bw_mode(struct ieee80211_hw *hw,
+			       enum nl80211_channel_type ch_type);
+void rtl8723be_phy_sw_chnl_callback(struct ieee80211_hw *hw);
+u8 rtl8723be_phy_sw_chnl(struct ieee80211_hw *hw);
+void rtl8723be_phy_iq_calibrate(struct ieee80211_hw *hw,
+				bool b_recovery);
+void rtl23b_phy_ap_calibrate(struct ieee80211_hw *hw, char delta);
+void rtl8723be_phy_lc_calibrate(struct ieee80211_hw *hw);
+void rtl8723be_phy_set_rfpath_switch(struct ieee80211_hw *hw, bool bmain);
+bool rtl8723be_phy_config_rf_with_headerfile(struct ieee80211_hw *hw,
+					     enum radio_path rfpath);
+bool rtl8723be_phy_set_io_cmd(struct ieee80211_hw *hw, enum io_type iotype);
+bool rtl8723be_phy_set_rf_power_state(struct ieee80211_hw *hw,
+				      enum rf_pwrstate rfpwr_state);
+#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/pwrseq.c b/drivers/net/wireless/rtlwifi/rtl8723be/pwrseq.c
new file mode 100644
index 000000000000..b5167e73fecf
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/pwrseq.c
@@ -0,0 +1,106 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2014  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "pwrseqcmd.h"
+#include "pwrseq.h"
+
+
+/* drivers should parse below arrays and do the corresponding actions */
+/*3 Power on  Array*/
+struct wlan_pwr_cfg rtl8723B_power_on_flow[RTL8723B_TRANS_CARDEMU_TO_ACT_STEPS +
+					   RTL8723B_TRANS_END_STEPS] = {
+	RTL8723B_TRANS_CARDEMU_TO_ACT
+	RTL8723B_TRANS_END
+};
+
+/*3Radio off GPIO Array */
+struct wlan_pwr_cfg rtl8723B_radio_off_flow[RTL8723B_TRANS_ACT_TO_CARDEMU_STEPS
+					    + RTL8723B_TRANS_END_STEPS] = {
+	RTL8723B_TRANS_ACT_TO_CARDEMU
+	RTL8723B_TRANS_END
+};
+
+/*3Card Disable Array*/
+struct wlan_pwr_cfg rtl8723B_card_disable_flow
+				[RTL8723B_TRANS_ACT_TO_CARDEMU_STEPS +
+				 RTL8723B_TRANS_CARDEMU_TO_PDN_STEPS +
+				 RTL8723B_TRANS_END_STEPS] = {
+	RTL8723B_TRANS_ACT_TO_CARDEMU
+	RTL8723B_TRANS_CARDEMU_TO_CARDDIS
+	RTL8723B_TRANS_END
+};
+
+/*3 Card Enable Array*/
+struct wlan_pwr_cfg rtl8723B_card_enable_flow
+				[RTL8723B_TRANS_ACT_TO_CARDEMU_STEPS +
+				 RTL8723B_TRANS_CARDEMU_TO_PDN_STEPS +
+				 RTL8723B_TRANS_END_STEPS] = {
+	RTL8723B_TRANS_CARDDIS_TO_CARDEMU
+	RTL8723B_TRANS_CARDEMU_TO_ACT
+	RTL8723B_TRANS_END
+};
+
+/*3Suspend Array*/
+struct wlan_pwr_cfg rtl8723B_suspend_flow[RTL8723B_TRANS_ACT_TO_CARDEMU_STEPS +
+					  RTL8723B_TRANS_CARDEMU_TO_SUS_STEPS +
+					  RTL8723B_TRANS_END_STEPS] = {
+	RTL8723B_TRANS_ACT_TO_CARDEMU
+	RTL8723B_TRANS_CARDEMU_TO_SUS
+	RTL8723B_TRANS_END
+};
+
+/*3 Resume Array*/
+struct wlan_pwr_cfg rtl8723B_resume_flow[RTL8723B_TRANS_ACT_TO_CARDEMU_STEPS +
+					 RTL8723B_TRANS_CARDEMU_TO_SUS_STEPS +
+					 RTL8723B_TRANS_END_STEPS] = {
+	RTL8723B_TRANS_SUS_TO_CARDEMU
+	RTL8723B_TRANS_CARDEMU_TO_ACT
+	RTL8723B_TRANS_END
+};
+
+/*3HWPDN Array*/
+struct wlan_pwr_cfg rtl8723B_hwpdn_flow[RTL8723B_TRANS_ACT_TO_CARDEMU_STEPS +
+					RTL8723B_TRANS_CARDEMU_TO_PDN_STEPS +
+					RTL8723B_TRANS_END_STEPS] = {
+	RTL8723B_TRANS_ACT_TO_CARDEMU
+	RTL8723B_TRANS_CARDEMU_TO_PDN
+	RTL8723B_TRANS_END
+};
+
+/*3 Enter LPS */
+struct wlan_pwr_cfg rtl8723B_enter_lps_flow[RTL8723B_TRANS_ACT_TO_LPS_STEPS +
+					    RTL8723B_TRANS_END_STEPS] = {
+	/*FW behavior*/
+	RTL8723B_TRANS_ACT_TO_LPS
+	RTL8723B_TRANS_END
+};
+
+/*3 Leave LPS */
+struct wlan_pwr_cfg rtl8723B_leave_lps_flow[RTL8723B_TRANS_LPS_TO_ACT_STEPS +
+					    RTL8723B_TRANS_END_STEPS] = {
+	/*FW behavior*/
+	RTL8723B_TRANS_LPS_TO_ACT
+	RTL8723B_TRANS_END
+};
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/pwrseq.h b/drivers/net/wireless/rtlwifi/rtl8723be/pwrseq.h
new file mode 100644
index 000000000000..960b408216df
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/pwrseq.h
@@ -0,0 +1,305 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2014  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __RTL8723BE_PWRSEQ_H__
+#define __RTL8723BE_PWRSEQ_H__
+
+#include "pwrseqcmd.h"
+/*	Check document WM-20130425-JackieLau-RTL8723B_Power_Architecture v05.vsd
+ *	There are 6 HW Power States:
+ *	0: POFF--Power Off
+ *	1: PDN--Power Down
+ *	2: CARDEMU--Card Emulation
+ *	3: ACT--Active Mode
+ *	4: LPS--Low Power State
+ *	5: SUS--Suspend
+ *
+ *	The transition from different states are defined below
+ *	TRANS_CARDEMU_TO_ACT
+ *	TRANS_ACT_TO_CARDEMU
+ *	TRANS_CARDEMU_TO_SUS
+ *	TRANS_SUS_TO_CARDEMU
+ *	TRANS_CARDEMU_TO_PDN
+ *	TRANS_ACT_TO_LPS
+ *	TRANS_LPS_TO_ACT
+ *
+ *	TRANS_END
+ */
+#define	RTL8723B_TRANS_CARDEMU_TO_ACT_STEPS	23
+#define	RTL8723B_TRANS_ACT_TO_CARDEMU_STEPS	15
+#define	RTL8723B_TRANS_CARDEMU_TO_SUS_STEPS	15
+#define	RTL8723B_TRANS_SUS_TO_CARDEMU_STEPS	15
+#define	RTL8723B_TRANS_CARDEMU_TO_PDN_STEPS	15
+#define	RTL8723B_TRANS_PDN_TO_CARDEMU_STEPS	15
+#define	RTL8723B_TRANS_ACT_TO_LPS_STEPS		15
+#define	RTL8723B_TRANS_LPS_TO_ACT_STEPS		15
+#define	RTL8723B_TRANS_END_STEPS		1
+
+#define RTL8723B_TRANS_CARDEMU_TO_ACT					\
+	{0x0020, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,			\
+	 PWR_INTF_USB_MSK | PWR_INTF_SDIO_MSK,				\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), BIT(0)},		\
+	{0x0067, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,			\
+	 PWR_INTF_USB_MSK | PWR_INTF_SDIO_MSK,				\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0},			\
+	{0x0001, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,			\
+	 PWR_INTF_USB_MSK | PWR_INTF_SDIO_MSK,				\
+	 PWR_BASEADDR_MAC, PWR_CMD_DELAY, 1, PWRSEQ_DELAY_MS},		\
+	{0x0000, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,			\
+	 PWR_INTF_USB_MSK | PWR_INTF_SDIO_MSK,				\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(5), 0},			\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, (BIT(4)|BIT(3)|BIT(2)), 0},	\
+	{0x0075, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0) , 0},			\
+	{0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(1), BIT(1)},		\
+	{0x0075, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0) , BIT(0)},		\
+	{0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), BIT(0)},		\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), 0},			\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, (BIT(4)|BIT(3)), 0},		\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), BIT(0)},		\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(0), 0},			\
+	{0x0010, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(6), BIT(6)},		\
+	{0x0049, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1)},		\
+	{0x0063, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1)},		\
+	{0x0062, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), 0},			\
+	{0x0058, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), BIT(0)},		\
+	{0x005A, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1)},		\
+	{0x0068, PWR_CUT_TESTCHIP_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3), BIT(3)},		\
+	{0x0069, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(6), BIT(6)},
+
+#define RTL8723B_TRANS_ACT_TO_CARDEMU					\
+	{0x001F, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0},			\
+	{0x004F, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), 0},			\
+	{0x0049, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), 0},			\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1)},		\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(1), 0},			\
+	{0x0010, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(6), 0},			\
+	{0x0000, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,			\
+	 PWR_INTF_USB_MSK | PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC,	\
+	 PWR_CMD_WRITE, BIT(5), BIT(5)},				\
+	{0x0020, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,			\
+	 PWR_INTF_USB_MSK | PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC,	\
+	 PWR_CMD_WRITE, BIT(0), 0},
+
+#define RTL8723B_TRANS_CARDEMU_TO_SUS					\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4) | BIT(3), (BIT(4) | BIT(3))}, \
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,			\
+	 PWR_INTF_USB_MSK | PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC,	\
+	 PWR_CMD_WRITE, BIT(3) | BIT(4), BIT(3)},			\
+	{0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)},		\
+	{0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x20},			\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3) | BIT(4), BIT(3) | BIT(4)},\
+	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	 PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), BIT(0)},		\
+	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	 PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), 0},
+
+#define RTL8723B_TRANS_SUS_TO_CARDEMU					\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3) | BIT(7), 0},		\
+	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	 PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), 0},			\
+	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	 PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), BIT(1)},		\
+	{0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0},			\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), 0},
+
+#define RTL8723B_TRANS_CARDEMU_TO_CARDDIS				\
+	{0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x20},			\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,			\
+	 PWR_INTF_USB_MSK | PWR_INTF_SDIO_MSK,				\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), BIT(3)},	\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(2), BIT(2)},		\
+	{0x004A, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), 1},			\
+	{0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)},		\
+	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	 PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), BIT(0)},		\
+	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	 PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), 0},
+
+#define RTL8723B_TRANS_CARDDIS_TO_CARDEMU				\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3) | BIT(7), 0},		\
+	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	 PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), 0},			\
+	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	 PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), BIT(1)},		\
+	{0x004A, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), 0},			\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), 0},		\
+	{0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0},			\
+	{0x0301, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0},
+
+#define RTL8723B_TRANS_CARDEMU_TO_PDN					\
+	{0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)},		\
+	{0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,			\
+	 PWR_INTF_SDIO_MSK | PWR_INTF_USB_MSK, PWR_BASEADDR_MAC,	\
+	 PWR_CMD_WRITE, 0xFF, 0x20},					\
+	{0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), 0},			\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), BIT(7)},
+
+#define RTL8723B_TRANS_PDN_TO_CARDEMU					\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), 0},
+
+#define RTL8723B_TRANS_ACT_TO_LPS					\
+	{0x0301, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0xFF},			\
+	{0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0xFF},			\
+	{0x05F8, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0},			\
+	{0x05F9, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0},			\
+	{0x05FA, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0},			\
+	{0x05FB, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0},			\
+	{0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), 0},			\
+	{0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_US},		\
+	{0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), 0},			\
+	{0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x03},			\
+	{0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), 0},			\
+	{0x0093, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x00},			\
+	{0x0553, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(5), BIT(5)},
+
+#define RTL8723B_TRANS_LPS_TO_ACT					\
+	{0x0080, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	 PWR_BASEADDR_SDIO, PWR_CMD_WRITE, 0xFF, 0x84},		\
+	{0xFE58, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84},			\
+	{0x0361, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84},			\
+	{0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_MS},		\
+	{0x0008, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0},			\
+	{0x0109, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(7), 0},		\
+	{0x0029, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(6)|BIT(7), 0},		\
+	{0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1)},		\
+	{0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0xFF},			\
+	{0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1) | BIT(0), BIT(1) | BIT(0)}, \
+	{0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0},
+
+#define RTL8723B_TRANS_END						\
+	{0xFFFF, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, 0,	\
+	 PWR_CMD_END, 0, 0},
+
+extern struct wlan_pwr_cfg rtl8723B_power_on_flow
+				[RTL8723B_TRANS_CARDEMU_TO_ACT_STEPS +
+				 RTL8723B_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8723B_radio_off_flow
+				[RTL8723B_TRANS_ACT_TO_CARDEMU_STEPS +
+				 RTL8723B_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8723B_card_disable_flow
+				[RTL8723B_TRANS_ACT_TO_CARDEMU_STEPS +
+				 RTL8723B_TRANS_CARDEMU_TO_PDN_STEPS +
+				 RTL8723B_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8723B_card_enable_flow
+				[RTL8723B_TRANS_ACT_TO_CARDEMU_STEPS +
+				 RTL8723B_TRANS_CARDEMU_TO_PDN_STEPS +
+				 RTL8723B_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8723B_suspend_flow
+				[RTL8723B_TRANS_ACT_TO_CARDEMU_STEPS +
+				 RTL8723B_TRANS_CARDEMU_TO_SUS_STEPS +
+				 RTL8723B_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8723B_resume_flow
+				[RTL8723B_TRANS_ACT_TO_CARDEMU_STEPS +
+				 RTL8723B_TRANS_CARDEMU_TO_SUS_STEPS +
+				 RTL8723B_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8723B_hwpdn_flow
+				[RTL8723B_TRANS_ACT_TO_CARDEMU_STEPS +
+				 RTL8723B_TRANS_CARDEMU_TO_PDN_STEPS +
+				 RTL8723B_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8723B_enter_lps_flow
+				[RTL8723B_TRANS_ACT_TO_LPS_STEPS +
+				 RTL8723B_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8723B_leave_lps_flow
+				[RTL8723B_TRANS_LPS_TO_ACT_STEPS +
+				 RTL8723B_TRANS_END_STEPS];
+
+/* RTL8723 Power Configuration CMDs for PCIe interface */
+#define RTL8723_NIC_PWR_ON_FLOW		rtl8723B_power_on_flow
+#define RTL8723_NIC_RF_OFF_FLOW		rtl8723B_radio_off_flow
+#define RTL8723_NIC_DISABLE_FLOW	rtl8723B_card_disable_flow
+#define RTL8723_NIC_ENABLE_FLOW		rtl8723B_card_enable_flow
+#define RTL8723_NIC_SUSPEND_FLOW	rtl8723B_suspend_flow
+#define RTL8723_NIC_RESUME_FLOW		rtl8723B_resume_flow
+#define RTL8723_NIC_PDN_FLOW		rtl8723B_hwpdn_flow
+#define RTL8723_NIC_LPS_ENTER_FLOW	rtl8723B_enter_lps_flow
+#define RTL8723_NIC_LPS_LEAVE_FLOW	rtl8723B_leave_lps_flow
+
+#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/pwrseqcmd.c b/drivers/net/wireless/rtlwifi/rtl8723be/pwrseqcmd.c
new file mode 100644
index 000000000000..e4a507a756fb
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/pwrseqcmd.c
@@ -0,0 +1,140 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2014  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "pwrseq.h"
+
+/*	Description:
+ *		This routine deal with the Power Configuration CMDs
+ *		 parsing for RTL8723/RTL8188E Series IC.
+ *	Assumption:
+ *		We should follow specific format which was released from HW SD.
+ *
+ *	2011.07.07, added by Roger.
+ */
+bool rtlbe_hal_pwrseqcmdparsing(struct rtl_priv *rtlpriv, u8 cut_version,
+				 u8 fab_version, u8 interface_type,
+				 struct wlan_pwr_cfg pwrcfgcmd[])
+
+{
+	struct wlan_pwr_cfg pwr_cfg_cmd = {0};
+	bool b_polling_bit = false;
+	u32 ary_idx = 0;
+	u8 value = 0;
+	u32 offset = 0;
+	u32 polling_count = 0;
+	u32 max_polling_cnt = 5000;
+
+	do {
+		pwr_cfg_cmd = pwrcfgcmd[ary_idx];
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+			 "rtlbe_hal_pwrseqcmdparsing(): "
+			 "offset(%#x),cut_msk(%#x), fab_msk(%#x),"
+			 "interface_msk(%#x), base(%#x), "
+			 "cmd(%#x), msk(%#x), value(%#x)\n",
+			 GET_PWR_CFG_OFFSET(pwr_cfg_cmd),
+			 GET_PWR_CFG_CUT_MASK(pwr_cfg_cmd),
+			 GET_PWR_CFG_FAB_MASK(pwr_cfg_cmd),
+			 GET_PWR_CFG_INTF_MASK(pwr_cfg_cmd),
+			 GET_PWR_CFG_BASE(pwr_cfg_cmd),
+			 GET_PWR_CFG_CMD(pwr_cfg_cmd),
+			 GET_PWR_CFG_MASK(pwr_cfg_cmd),
+			 GET_PWR_CFG_VALUE(pwr_cfg_cmd));
+
+		if ((GET_PWR_CFG_FAB_MASK(pwr_cfg_cmd)&fab_version) &&
+		    (GET_PWR_CFG_CUT_MASK(pwr_cfg_cmd)&cut_version) &&
+		    (GET_PWR_CFG_INTF_MASK(pwr_cfg_cmd)&interface_type)) {
+			switch (GET_PWR_CFG_CMD(pwr_cfg_cmd)) {
+			case PWR_CMD_READ:
+				RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+					 "rtlbe_hal_pwrseqcmdparsing(): "
+					  "PWR_CMD_READ\n");
+				break;
+			case PWR_CMD_WRITE:
+				RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+					 "rtlbe_hal_pwrseqcmdparsing(): "
+					  "PWR_CMD_WRITE\n");
+				offset = GET_PWR_CFG_OFFSET(pwr_cfg_cmd);
+
+				/*Read the value from system register*/
+				value = rtl_read_byte(rtlpriv, offset);
+				value &= (~(GET_PWR_CFG_MASK(pwr_cfg_cmd)));
+				value = value | (GET_PWR_CFG_VALUE(pwr_cfg_cmd)
+					& GET_PWR_CFG_MASK(pwr_cfg_cmd));
+
+				/*Write the value back to sytem register*/
+				rtl_write_byte(rtlpriv, offset, value);
+				break;
+			case PWR_CMD_POLLING:
+				RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+					 "rtlbe_hal_pwrseqcmdparsing(): "
+					  "PWR_CMD_POLLING\n");
+				b_polling_bit = false;
+				offset = GET_PWR_CFG_OFFSET(pwr_cfg_cmd);
+
+				do {
+					value = rtl_read_byte(rtlpriv, offset);
+
+					value &= GET_PWR_CFG_MASK(pwr_cfg_cmd);
+					if (value ==
+					    (GET_PWR_CFG_VALUE(pwr_cfg_cmd) &
+					     GET_PWR_CFG_MASK(pwr_cfg_cmd)))
+						b_polling_bit = true;
+					else
+						udelay(10);
+
+					if (polling_count++ > max_polling_cnt)
+						return false;
+
+				} while (!b_polling_bit);
+				break;
+			case PWR_CMD_DELAY:
+				RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+					 "rtlbe_hal_pwrseqcmdparsing(): "
+					 "PWR_CMD_DELAY\n");
+				if (GET_PWR_CFG_VALUE(pwr_cfg_cmd) ==
+				    PWRSEQ_DELAY_US)
+					udelay(GET_PWR_CFG_OFFSET(pwr_cfg_cmd));
+				else
+					mdelay(GET_PWR_CFG_OFFSET(pwr_cfg_cmd));
+				break;
+			case PWR_CMD_END:
+				RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+					 "rtlbe_hal_pwrseqcmdparsing(): "
+					 "PWR_CMD_END\n");
+				return true;
+				break;
+			default:
+				RT_ASSERT(false,
+					  "rtlbe_hal_pwrseqcmdparsing(): "
+					  "Unknown CMD!!\n");
+				break;
+			}
+		}
+
+		ary_idx++;
+	} while (1);
+
+	return true;
+}
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/pwrseqcmd.h b/drivers/net/wireless/rtlwifi/rtl8723be/pwrseqcmd.h
new file mode 100644
index 000000000000..ce14a3b5cb71
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/pwrseqcmd.h
@@ -0,0 +1,95 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2014  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __RTL8723BE_PWRSEQCMD_H__
+#define __RTL8723BE_PWRSEQCMD_H__
+
+#include "../wifi.h"
+/*---------------------------------------------*/
+/*The value of cmd: 4 bits */
+/*---------------------------------------------*/
+#define PWR_CMD_READ		0x00
+#define PWR_CMD_WRITE		0x01
+#define PWR_CMD_POLLING		0x02
+#define PWR_CMD_DELAY		0x03
+#define PWR_CMD_END		0x04
+
+/* define the base address of each block */
+#define PWR_BASEADDR_MAC	0x00
+#define PWR_BASEADDR_USB	0x01
+#define PWR_BASEADDR_PCIE	0x02
+#define PWR_BASEADDR_SDIO	0x03
+
+#define	PWR_INTF_SDIO_MSK	BIT(0)
+#define	PWR_INTF_USB_MSK	BIT(1)
+#define	PWR_INTF_PCI_MSK	BIT(2)
+#define	PWR_INTF_ALL_MSK	(BIT(0) | BIT(1) | BIT(2) | BIT(3))
+
+#define	PWR_FAB_TSMC_MSK	BIT(0)
+#define	PWR_FAB_UMC_MSK		BIT(1)
+#define	PWR_FAB_ALL_MSK		(BIT(0) | BIT(1) | BIT(2) | BIT(3))
+
+#define	PWR_CUT_TESTCHIP_MSK	BIT(0)
+#define	PWR_CUT_A_MSK		BIT(1)
+#define	PWR_CUT_B_MSK		BIT(2)
+#define	PWR_CUT_C_MSK		BIT(3)
+#define	PWR_CUT_D_MSK		BIT(4)
+#define	PWR_CUT_E_MSK		BIT(5)
+#define	PWR_CUT_F_MSK		BIT(6)
+#define	PWR_CUT_G_MSK		BIT(7)
+#define	PWR_CUT_ALL_MSK		0xFF
+
+
+enum pwrseq_delay_unit {
+	PWRSEQ_DELAY_US,
+	PWRSEQ_DELAY_MS,
+};
+
+struct wlan_pwr_cfg {
+	u16 offset;
+	u8 cut_msk;
+	u8 fab_msk:4;
+	u8 interface_msk:4;
+	u8 base:4;
+	u8 cmd:4;
+	u8 msk;
+	u8 value;
+
+};
+
+#define	GET_PWR_CFG_OFFSET(__PWR_CMD)	__PWR_CMD.offset
+#define	GET_PWR_CFG_CUT_MASK(__PWR_CMD)	__PWR_CMD.cut_msk
+#define	GET_PWR_CFG_FAB_MASK(__PWR_CMD)	__PWR_CMD.fab_msk
+#define	GET_PWR_CFG_INTF_MASK(__PWR_CMD)	__PWR_CMD.interface_msk
+#define	GET_PWR_CFG_BASE(__PWR_CMD)	__PWR_CMD.base
+#define	GET_PWR_CFG_CMD(__PWR_CMD)	__PWR_CMD.cmd
+#define	GET_PWR_CFG_MASK(__PWR_CMD)	__PWR_CMD.msk
+#define	GET_PWR_CFG_VALUE(__PWR_CMD)	__PWR_CMD.value
+
+bool rtlbe_hal_pwrseqcmdparsing(struct rtl_priv *rtlpriv, u8 cut_version,
+				 u8 fab_version, u8 interface_type,
+				 struct wlan_pwr_cfg pwrcfgcmd[]);
+
+#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/reg.h b/drivers/net/wireless/rtlwifi/rtl8723be/reg.h
new file mode 100644
index 000000000000..65221e678230
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/reg.h
@@ -0,0 +1,2293 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2014  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __RTL8723BE_REG_H__
+#define __RTL8723BE_REG_H__
+
+#define TXPKT_BUF_SELECT			0x69
+#define RXPKT_BUF_SELECT			0xA5
+#define DISABLE_TRXPKT_BUF_ACCESS		0x0
+
+#define REG_SYS_ISO_CTRL			0x0000
+#define REG_SYS_FUNC_EN				0x0002
+#define REG_APS_FSMCO				0x0004
+#define REG_SYS_CLKR				0x0008
+#define REG_9346CR				0x000A
+#define REG_EE_VPD				0x000C
+#define REG_AFE_MISC				0x0010
+#define REG_SPS0_CTRL				0x0011
+#define REG_SPS_OCP_CFG				0x0018
+#define REG_RSV_CTRL				0x001C
+#define REG_RF_CTRL				0x001F
+#define REG_LDOA15_CTRL				0x0020
+#define REG_LDOV12D_CTRL			0x0021
+#define REG_LDOHCI12_CTRL			0x0022
+#define REG_LPLDO_CTRL				0x0023
+#define REG_AFE_XTAL_CTRL			0x0024
+/* 1.5v for 8188EE test chip, 1.4v for MP chip */
+#define REG_AFE_LDO_CTRL			0x0027
+#define REG_AFE_PLL_CTRL			0x0028
+#define REG_MAC_PHY_CTRL			0x002c
+#define REG_EFUSE_CTRL				0x0030
+#define REG_EFUSE_TEST				0x0034
+#define REG_PWR_DATA				0x0038
+#define REG_CAL_TIMER				0x003C
+#define REG_ACLK_MON				0x003E
+#define REG_GPIO_MUXCFG				0x0040
+#define REG_GPIO_IO_SEL				0x0042
+#define REG_MAC_PINMUX_CFG			0x0043
+#define REG_GPIO_PIN_CTRL			0x0044
+#define REG_GPIO_INTM				0x0048
+#define REG_LEDCFG0				0x004C
+#define REG_LEDCFG1				0x004D
+#define REG_LEDCFG2				0x004E
+#define REG_LEDCFG3				0x004F
+#define REG_FSIMR				0x0050
+#define REG_FSISR				0x0054
+#define REG_HSIMR				0x0058
+#define REG_HSISR				0x005c
+#define REG_GPIO_PIN_CTRL_2			0x0060
+#define REG_GPIO_IO_SEL_2			0x0062
+#define REG_MULTI_FUNC_CTRL			0x0068
+#define REG_GPIO_OUTPUT				0x006c
+#define REG_AFE_XTAL_CTRL_EXT			0x0078
+#define REG_XCK_OUT_CTRL			0x007c
+#define REG_MCUFWDL				0x0080
+#define REG_WOL_EVENT				0x0081
+#define REG_MCUTSTCFG				0x0084
+
+
+#define REG_HIMR				0x00B0
+#define REG_HISR				0x00B4
+#define REG_HIMRE				0x00B8
+#define REG_HISRE				0x00BC
+
+#define REG_EFUSE_ACCESS			0x00CF
+
+#define REG_BIST_SCAN				0x00D0
+#define REG_BIST_RPT				0x00D4
+#define REG_BIST_ROM_RPT			0x00D8
+#define REG_USB_SIE_INTF			0x00E0
+#define REG_PCIE_MIO_INTF			0x00E4
+#define REG_PCIE_MIO_INTD			0x00E8
+#define REG_HPON_FSM				0x00EC
+#define REG_SYS_CFG				0x00F0
+#define REG_GPIO_OUTSTS				0x00F4
+#define REG_SYS_CFG1				0x00F0
+#define REG_ROM_VERSION				0x00FD
+
+#define REG_CR					0x0100
+#define REG_PBP					0x0104
+#define REG_PKT_BUFF_ACCESS_CTRL		0x0106
+#define REG_TRXDMA_CTRL				0x010C
+#define REG_TRXFF_BNDY				0x0114
+#define REG_TRXFF_STATUS			0x0118
+#define REG_RXFF_PTR				0x011C
+
+#define REG_CPWM				0x012F
+#define REG_FWIMR				0x0130
+#define REG_FWISR				0x0134
+#define REG_PKTBUF_DBG_CTRL			0x0140
+#define REG_PKTBUF_DBG_DATA_L			0x0144
+#define REG_PKTBUF_DBG_DATA_H			0x0148
+#define REG_RXPKTBUF_CTRL			(REG_PKTBUF_DBG_CTRL + 2)
+
+#define REG_TC0_CTRL				0x0150
+#define REG_TC1_CTRL				0x0154
+#define REG_TC2_CTRL				0x0158
+#define REG_TC3_CTRL				0x015C
+#define REG_TC4_CTRL				0x0160
+#define REG_TCUNIT_BASE				0x0164
+#define REG_MBIST_START				0x0174
+#define REG_MBIST_DONE				0x0178
+#define REG_MBIST_FAIL				0x017C
+#define REG_32K_CTRL				0x0194
+#define REG_C2HEVT_MSG_NORMAL			0x01A0
+#define REG_C2HEVT_CLEAR			0x01AF
+#define REG_C2HEVT_MSG_TEST			0x01B8
+#define REG_MCUTST_1				0x01c0
+#define REG_FMETHR				0x01C8
+#define REG_HMETFR				0x01CC
+#define REG_HMEBOX_0				0x01D0
+#define REG_HMEBOX_1				0x01D4
+#define REG_HMEBOX_2				0x01D8
+#define REG_HMEBOX_3				0x01DC
+
+#define REG_LLT_INIT				0x01E0
+#define REG_BB_ACCEESS_CTRL			0x01E8
+#define REG_BB_ACCESS_DATA			0x01EC
+
+#define REG_HMEBOX_EXT_0			0x01F0
+#define REG_HMEBOX_EXT_1			0x01F4
+#define REG_HMEBOX_EXT_2			0x01F8
+#define REG_HMEBOX_EXT_3			0x01FC
+
+#define REG_RQPN				0x0200
+#define REG_FIFOPAGE				0x0204
+#define REG_TDECTRL				0x0208
+#define REG_TXDMA_OFFSET_CHK			0x020C
+#define REG_TXDMA_STATUS			0x0210
+#define REG_RQPN_NPQ				0x0214
+
+#define REG_RXDMA_AGG_PG_TH			0x0280
+/* FW shall update this register before FW write RXPKT_RELEASE_POLL to 1 */
+#define REG_FW_UPD_RDPTR			0x0284
+/* Control the RX DMA.*/
+#define REG_RXDMA_CONTROL			0x0286
+/* The number of packets in RXPKTBUF.	*/
+#define REG_RXPKT_NUM				0x0287
+
+#define	REG_PCIE_CTRL_REG			0x0300
+#define	REG_INT_MIG				0x0304
+#define	REG_BCNQ_DESA				0x0308
+#define	REG_HQ_DESA				0x0310
+#define	REG_MGQ_DESA				0x0318
+#define	REG_VOQ_DESA				0x0320
+#define	REG_VIQ_DESA				0x0328
+#define	REG_BEQ_DESA				0x0330
+#define	REG_BKQ_DESA				0x0338
+#define	REG_RX_DESA				0x0340
+
+#define	REG_DBI					0x0348
+#define	REG_MDIO				0x0354
+#define	REG_DBG_SEL				0x0360
+#define	REG_PCIE_HRPWM				0x0361
+#define	REG_PCIE_HCPWM				0x0363
+#define	REG_UART_CTRL				0x0364
+#define	REG_WATCH_DOG				0x0368
+#define	REG_UART_TX_DESA			0x0370
+#define	REG_UART_RX_DESA			0x0378
+
+
+#define	REG_HDAQ_DESA_NODEF			0x0000
+#define	REG_CMDQ_DESA_NODEF			0x0000
+
+#define REG_VOQ_INFORMATION			0x0400
+#define REG_VIQ_INFORMATION			0x0404
+#define REG_BEQ_INFORMATION			0x0408
+#define REG_BKQ_INFORMATION			0x040C
+#define REG_MGQ_INFORMATION			0x0410
+#define REG_HGQ_INFORMATION			0x0414
+#define REG_BCNQ_INFORMATION			0x0418
+#define REG_TXPKT_EMPTY				0x041A
+
+
+#define REG_CPU_MGQ_INFORMATION			0x041C
+#define REG_FWHW_TXQ_CTRL			0x0420
+#define REG_HWSEQ_CTRL				0x0423
+#define REG_TXPKTBUF_BCNQ_BDNY			0x0424
+#define REG_TXPKTBUF_MGQ_BDNY			0x0425
+#define REG_MULTI_BCNQ_EN			0x0426
+#define REG_MULTI_BCNQ_OFFSET			0x0427
+#define REG_SPEC_SIFS				0x0428
+#define REG_RL					0x042A
+#define REG_DARFRC				0x0430
+#define REG_RARFRC				0x0438
+#define REG_RRSR				0x0440
+#define REG_ARFR0				0x0444
+#define REG_ARFR1				0x0448
+#define REG_ARFR2				0x044C
+#define REG_ARFR3				0x0450
+#define REG_AMPDU_MAX_TIME			0x0456
+#define REG_AGGLEN_LMT				0x0458
+#define REG_AMPDU_MIN_SPACE			0x045C
+#define REG_TXPKTBUF_WMAC_LBK_BF_HD		0x045D
+#define REG_FAST_EDCA_CTRL			0x0460
+#define REG_RD_RESP_PKT_TH			0x0463
+#define REG_INIRTS_RATE_SEL			0x0480
+#define REG_INIDATA_RATE_SEL			0x0484
+#define REG_POWER_STATUS			0x04A4
+#define REG_POWER_STAGE1			0x04B4
+#define REG_POWER_STAGE2			0x04B8
+#define REG_PKT_LIFE_TIME			0x04C0
+#define REG_STBC_SETTING			0x04C4
+#define REG_PROT_MODE_CTRL			0x04C8
+#define REG_BAR_MODE_CTRL			0x04CC
+#define REG_RA_TRY_RATE_AGG_LMT			0x04CF
+#define REG_EARLY_MODE_CONTROL			0x04D0
+#define REG_NQOS_SEQ				0x04DC
+#define REG_QOS_SEQ				0x04DE
+#define REG_NEED_CPU_HANDLE			0x04E0
+#define REG_PKT_LOSE_RPT			0x04E1
+#define REG_PTCL_ERR_STATUS			0x04E2
+#define REG_TX_RPT_CTRL				0x04EC
+#define REG_TX_RPT_TIME				0x04F0
+#define REG_DUMMY				0x04FC
+
+#define REG_EDCA_VO_PARAM			0x0500
+#define REG_EDCA_VI_PARAM			0x0504
+#define REG_EDCA_BE_PARAM			0x0508
+#define REG_EDCA_BK_PARAM			0x050C
+#define REG_BCNTCFG				0x0510
+#define REG_PIFS				0x0512
+#define REG_RDG_PIFS				0x0513
+#define REG_SIFS_CTX				0x0514
+#define REG_SIFS_TRX				0x0516
+#define REG_AGGR_BREAK_TIME			0x051A
+#define REG_SLOT				0x051B
+#define REG_TX_PTCL_CTRL			0x0520
+#define REG_TXPAUSE				0x0522
+#define REG_DIS_TXREQ_CLR			0x0523
+#define REG_RD_CTRL				0x0524
+#define REG_TBTT_PROHIBIT			0x0540
+#define REG_RD_NAV_NXT				0x0544
+#define REG_NAV_PROT_LEN			0x0546
+#define REG_BCN_CTRL				0x0550
+#define REG_USTIME_TSF				0x0551
+#define REG_MBID_NUM				0x0552
+#define REG_DUAL_TSF_RST			0x0553
+#define REG_BCN_INTERVAL			0x0554
+#define REG_MBSSID_BCN_SPACE			0x0554
+#define REG_DRVERLYINT				0x0558
+#define REG_BCNDMATIM				0x0559
+#define REG_ATIMWND				0x055A
+#define REG_BCN_MAX_ERR				0x055D
+#define REG_RXTSF_OFFSET_CCK			0x055E
+#define REG_RXTSF_OFFSET_OFDM			0x055F
+#define REG_TSFTR				0x0560
+#define REG_INIT_TSFTR				0x0564
+#define REG_SECONDARY_CCA_CTRL			0x0577
+#define REG_PSTIMER				0x0580
+#define REG_TIMER0				0x0584
+#define REG_TIMER1				0x0588
+#define REG_ACMHWCTRL				0x05C0
+#define REG_ACMRSTCTRL				0x05C1
+#define REG_ACMAVG				0x05C2
+#define REG_VO_ADMTIME				0x05C4
+#define REG_VI_ADMTIME				0x05C6
+#define REG_BE_ADMTIME				0x05C8
+#define REG_EDCA_RANDOM_GEN			0x05CC
+#define REG_SCH_TXCMD				0x05D0
+
+#define REG_APSD_CTRL				0x0600
+#define REG_BWOPMODE				0x0603
+#define REG_TCR					0x0604
+#define REG_RCR					0x0608
+#define REG_RX_PKT_LIMIT			0x060C
+#define REG_RX_DLK_TIME				0x060D
+#define REG_RX_DRVINFO_SZ			0x060F
+
+#define REG_MACID				0x0610
+#define REG_BSSID				0x0618
+#define REG_MAR					0x0620
+#define REG_MBIDCAMCFG				0x0628
+
+#define REG_USTIME_EDCA				0x0638
+#define REG_MAC_SPEC_SIFS			0x063A
+#define REG_RESP_SIFS_CCK			0x063C
+#define REG_RESP_SIFS_OFDM			0x063E
+#define REG_ACKTO				0x0640
+#define REG_CTS2TO				0x0641
+#define REG_EIFS				0x0642
+
+#define REG_NAV_CTRL				0x0650
+#define REG_BACAMCMD				0x0654
+#define REG_BACAMCONTENT			0x0658
+#define REG_LBDLY				0x0660
+#define REG_FWDLY				0x0661
+#define REG_RXERR_RPT				0x0664
+#define REG_TRXPTCL_CTL				0x0668
+
+#define REG_CAMCMD				0x0670
+#define REG_CAMWRITE				0x0674
+#define REG_CAMREAD				0x0678
+#define REG_CAMDBG				0x067C
+#define REG_SECCFG				0x0680
+
+#define REG_WOW_CTRL				0x0690
+#define REG_PSSTATUS				0x0691
+#define REG_PS_RX_INFO				0x0692
+#define REG_UAPSD_TID				0x0693
+#define REG_LPNAV_CTRL				0x0694
+#define REG_WKFMCAM_NUM				0x0698
+#define REG_WKFMCAM_RWD				0x069C
+#define REG_RXFLTMAP0				0x06A0
+#define REG_RXFLTMAP1				0x06A2
+#define REG_RXFLTMAP2				0x06A4
+#define REG_BCN_PSR_RPT				0x06A8
+#define REG_CALB32K_CTRL			0x06AC
+#define REG_PKT_MON_CTRL			0x06B4
+#define REG_BT_COEX_TABLE			0x06C0
+#define REG_WMAC_RESP_TXINFO			0x06D8
+
+#define REG_USB_INFO				0xFE17
+#define REG_USB_SPECIAL_OPTION			0xFE55
+#define REG_USB_DMA_AGG_TO			0xFE5B
+#define REG_USB_AGG_TO				0xFE5C
+#define REG_USB_AGG_TH				0xFE5D
+
+#define REG_TEST_USB_TXQS			0xFE48
+#define REG_TEST_SIE_VID			0xFE60
+#define REG_TEST_SIE_PID			0xFE62
+#define REG_TEST_SIE_OPTIONAL			0xFE64
+#define REG_TEST_SIE_CHIRP_K			0xFE65
+#define REG_TEST_SIE_PHY			0xFE66
+#define REG_TEST_SIE_MAC_ADDR			0xFE70
+#define REG_TEST_SIE_STRING			0xFE80
+
+#define REG_NORMAL_SIE_VID			0xFE60
+#define REG_NORMAL_SIE_PID			0xFE62
+#define REG_NORMAL_SIE_OPTIONAL			0xFE64
+#define REG_NORMAL_SIE_EP			0xFE65
+#define REG_NORMAL_SIE_PHY			0xFE68
+#define REG_NORMAL_SIE_MAC_ADDR			0xFE70
+#define REG_NORMAL_SIE_STRING			0xFE80
+
+#define	CR9346					REG_9346CR
+#define	MSR					(REG_CR + 2)
+#define	ISR					REG_HISR
+#define	TSFR					REG_TSFTR
+
+#define	MACIDR0					REG_MACID
+#define	MACIDR4					(REG_MACID + 4)
+
+#define PBP					REG_PBP
+
+#define	IDR0					MACIDR0
+#define	IDR4					MACIDR4
+
+#define	UNUSED_REGISTER				0x1BF
+#define	DCAM					UNUSED_REGISTER
+#define	PSR					UNUSED_REGISTER
+#define BBADDR					UNUSED_REGISTER
+#define	PHYDATAR				UNUSED_REGISTER
+
+#define	INVALID_BBRF_VALUE			0x12345678
+
+#define	MAX_MSS_DENSITY_2T			0x13
+#define	MAX_MSS_DENSITY_1T			0x0A
+
+#define	CMDEEPROM_EN				BIT(5)
+#define	CMDEEPROM_SEL				BIT(4)
+#define	CMD9346CR_9356SEL			BIT(4)
+#define	AUTOLOAD_EEPROM				(CMDEEPROM_EN | CMDEEPROM_SEL)
+#define	AUTOLOAD_EFUSE				CMDEEPROM_EN
+
+#define	GPIOSEL_GPIO				0
+#define	GPIOSEL_ENBT				BIT(5)
+
+#define	GPIO_IN					REG_GPIO_PIN_CTRL
+#define	GPIO_OUT				(REG_GPIO_PIN_CTRL + 1)
+#define	GPIO_IO_SEL				(REG_GPIO_PIN_CTRL + 2)
+#define	GPIO_MOD				(REG_GPIO_PIN_CTRL + 3)
+
+/* 8723/8188E Host System Interrupt Mask Register (offset 0x58, 32 byte) */
+#define	HSIMR_GPIO12_0_INT_EN			BIT(0)
+#define	HSIMR_SPS_OCP_INT_EN			BIT(5)
+#define	HSIMR_RON_INT_EN			BIT(6)
+#define	HSIMR_PDN_INT_EN			BIT(7)
+#define	HSIMR_GPIO9_INT_EN			BIT(25)
+
+/* 8723/8188E Host System Interrupt Status Register (offset 0x5C, 32 byte) */
+
+#define	HSISR_GPIO12_0_INT			BIT(0)
+#define	HSISR_SPS_OCP_INT			BIT(5)
+#define	HSISR_RON_INT_EN			BIT(6)
+#define	HSISR_PDNINT				BIT(7)
+#define	HSISR_GPIO9_INT				BIT(25)
+
+#define	MSR_NOLINK				0x00
+#define	MSR_ADHOC				0x01
+#define	MSR_INFRA				0x02
+#define	MSR_AP					0x03
+
+#define	RRSR_RSC_OFFSET				21
+#define	RRSR_SHORT_OFFSET			23
+#define	RRSR_RSC_BW_40M				0x600000
+#define	RRSR_RSC_UPSUBCHNL			0x400000
+#define	RRSR_RSC_LOWSUBCHNL			0x200000
+#define	RRSR_SHORT				0x800000
+#define	RRSR_1M					BIT(0)
+#define	RRSR_2M					BIT(1)
+#define	RRSR_5_5M				BIT(2)
+#define	RRSR_11M				BIT(3)
+#define	RRSR_6M					BIT(4)
+#define	RRSR_9M					BIT(5)
+#define	RRSR_12M				BIT(6)
+#define	RRSR_18M				BIT(7)
+#define	RRSR_24M				BIT(8)
+#define	RRSR_36M				BIT(9)
+#define	RRSR_48M				BIT(10)
+#define	RRSR_54M				BIT(11)
+#define	RRSR_MCS0				BIT(12)
+#define	RRSR_MCS1				BIT(13)
+#define	RRSR_MCS2				BIT(14)
+#define	RRSR_MCS3				BIT(15)
+#define	RRSR_MCS4				BIT(16)
+#define	RRSR_MCS5				BIT(17)
+#define	RRSR_MCS6				BIT(18)
+#define	RRSR_MCS7				BIT(19)
+#define	BRSR_ACKSHORTPMB			BIT(23)
+
+#define	RATR_1M					0x00000001
+#define	RATR_2M					0x00000002
+#define	RATR_55M				0x00000004
+#define	RATR_11M				0x00000008
+#define	RATR_6M					0x00000010
+#define	RATR_9M					0x00000020
+#define	RATR_12M				0x00000040
+#define	RATR_18M				0x00000080
+#define	RATR_24M				0x00000100
+#define	RATR_36M				0x00000200
+#define	RATR_48M				0x00000400
+#define	RATR_54M				0x00000800
+#define	RATR_MCS0				0x00001000
+#define	RATR_MCS1				0x00002000
+#define	RATR_MCS2				0x00004000
+#define	RATR_MCS3				0x00008000
+#define	RATR_MCS4				0x00010000
+#define	RATR_MCS5				0x00020000
+#define	RATR_MCS6				0x00040000
+#define	RATR_MCS7				0x00080000
+#define	RATR_MCS8				0x00100000
+#define	RATR_MCS9				0x00200000
+#define	RATR_MCS10				0x00400000
+#define	RATR_MCS11				0x00800000
+#define	RATR_MCS12				0x01000000
+#define	RATR_MCS13				0x02000000
+#define	RATR_MCS14				0x04000000
+#define	RATR_MCS15				0x08000000
+
+#define RATE_1M					BIT(0)
+#define RATE_2M					BIT(1)
+#define RATE_5_5M				BIT(2)
+#define RATE_11M				BIT(3)
+#define RATE_6M					BIT(4)
+#define RATE_9M					BIT(5)
+#define RATE_12M				BIT(6)
+#define RATE_18M				BIT(7)
+#define RATE_24M				BIT(8)
+#define RATE_36M				BIT(9)
+#define RATE_48M				BIT(10)
+#define RATE_54M				BIT(11)
+#define RATE_MCS0				BIT(12)
+#define RATE_MCS1				BIT(13)
+#define RATE_MCS2				BIT(14)
+#define RATE_MCS3				BIT(15)
+#define RATE_MCS4				BIT(16)
+#define RATE_MCS5				BIT(17)
+#define RATE_MCS6				BIT(18)
+#define RATE_MCS7				BIT(19)
+#define RATE_MCS8				BIT(20)
+#define RATE_MCS9				BIT(21)
+#define RATE_MCS10				BIT(22)
+#define RATE_MCS11				BIT(23)
+#define RATE_MCS12				BIT(24)
+#define RATE_MCS13				BIT(25)
+#define RATE_MCS14				BIT(26)
+#define RATE_MCS15				BIT(27)
+
+#define	RATE_ALL_CCK		(RATR_1M | RATR_2M | RATR_55M | RATR_11M)
+#define	RATE_ALL_OFDM_AG	(RATR_6M | RATR_9M | RATR_12M | RATR_18M |\
+				 RATR_24M | RATR_36M | RATR_48M | RATR_54M)
+#define	RATE_ALL_OFDM_1SS	(RATR_MCS0 | RATR_MCS1 | RATR_MCS2 |\
+				 RATR_MCS3 | RATR_MCS4 | RATR_MCS5 |\
+				 RATR_MCS6 | RATR_MCS7)
+#define	RATE_ALL_OFDM_2SS	(RATR_MCS8 | RATR_MCS9 | RATR_MCS10 |\
+				 RATR_MCS11 | RATR_MCS12 | RATR_MCS13 |\
+				 RATR_MCS14 | RATR_MCS15)
+
+#define	BW_OPMODE_20MHZ				BIT(2)
+#define	BW_OPMODE_5G				BIT(1)
+#define	BW_OPMODE_11J				BIT(0)
+
+#define	CAM_VALID				BIT(15)
+#define	CAM_NOTVALID				0x0000
+#define	CAM_USEDK				BIT(5)
+
+#define	CAM_NONE				0x0
+#define	CAM_WEP40				0x01
+#define	CAM_TKIP				0x02
+#define	CAM_AES					0x04
+#define	CAM_WEP104				0x05
+
+#define	TOTAL_CAM_ENTRY				32
+#define	HALF_CAM_ENTRY				16
+
+#define	CAM_WRITE				BIT(16)
+#define	CAM_READ				0x00000000
+#define	CAM_POLLINIG				BIT(31)
+
+#define	SCR_USEDK				0x01
+#define	SCR_TXSEC_ENABLE			0x02
+#define	SCR_RXSEC_ENABLE			0x04
+
+#define	WOW_PMEN				BIT(0)
+#define	WOW_WOMEN				BIT(1)
+#define	WOW_MAGIC				BIT(2)
+#define	WOW_UWF					BIT(3)
+
+/*********************************************
+*       8723BE IMR/ISR bits
+**********************************************/
+#define	IMR_DISABLED				0x0
+/* IMR DW0(0x0060-0063) Bit 0-31 */
+#define	IMR_TXCCK		BIT(30)	/* TXRPT interrupt when
+					 * CCX bit of the packet is set
+					 */
+#define	IMR_PSTIMEOUT		BIT(29)	/* Power Save Time Out Interrupt */
+#define	IMR_GTINT4		BIT(28)	/* When GTIMER4 expires,
+					 * this bit is set to 1
+					 */
+#define	IMR_GTINT3		BIT(27)	/* When GTIMER3 expires,
+					 * this bit is set to 1
+					 */
+#define	IMR_TBDER		BIT(26)	/* Transmit Beacon0 Error */
+#define	IMR_TBDOK		BIT(25)	/* Transmit Beacon0 OK */
+#define	IMR_TSF_BIT32_TOGGLE	BIT(24)	/* TSF Timer BIT32 toggle
+					 * indication interrupt
+					 */
+#define	IMR_BCNDMAINT0		BIT(20)	/* Beacon DMA Interrupt 0 */
+#define	IMR_BCNDOK0		BIT(16)	/* Beacon Queue DMA OK0 */
+#define	IMR_HSISR_IND_ON_INT	BIT(15)	/* HSISR Indicator (HSIMR & HSISR is
+					 * true, this bit is set to 1)
+					 */
+#define	IMR_BCNDMAINT_E		BIT(14)	/* Beacon DMA Interrupt
+					 * Extension for Win7
+					 */
+#define	IMR_ATIMEND		BIT(12)	/* CTWidnow End or ATIM Window End */
+#define	IMR_HISR1_IND_INT	BIT(11)	/* HISR1 Indicator (HISR1 & HIMR1 is
+					 * true, this bit is set to 1)
+					 */
+#define	IMR_C2HCMD		BIT(10)	/* CPU to Host Command INT Status,
+					 * Write 1 clear
+					 */
+#define	IMR_CPWM2		BIT(9)	/* CPU power Mode exchange INT Status,
+					 * Write 1 clear
+					 */
+#define	IMR_CPWM		BIT(8)	/* CPU power Mode exchange INT Status,
+					 * Write 1 clear
+					 */
+#define	IMR_HIGHDOK		BIT(7)	/* High Queue DMA OK */
+#define	IMR_MGNTDOK		BIT(6)	/* Management Queue DMA OK */
+#define	IMR_BKDOK		BIT(5)	/* AC_BK DMA OK	*/
+#define	IMR_BEDOK		BIT(4)	/* AC_BE DMA OK	*/
+#define	IMR_VIDOK		BIT(3)	/* AC_VI DMA OK	*/
+#define	IMR_VODOK		BIT(2)	/* AC_VO DMA OK	*/
+#define	IMR_RDU			BIT(1)	/* Rx Descriptor Unavailable */
+#define	IMR_ROK			BIT(0)	/* Receive DMA OK */
+
+/* IMR DW1(0x00B4-00B7) Bit 0-31 */
+#define	IMR_BCNDMAINT7		BIT(27)	/* Beacon DMA Interrupt 7 */
+#define	IMR_BCNDMAINT6		BIT(26)	/* Beacon DMA Interrupt 6 */
+#define	IMR_BCNDMAINT5		BIT(25)	/* Beacon DMA Interrupt 5 */
+#define	IMR_BCNDMAINT4		BIT(24)	/* Beacon DMA Interrupt 4 */
+#define	IMR_BCNDMAINT3		BIT(23)	/* Beacon DMA Interrupt 3 */
+#define	IMR_BCNDMAINT2		BIT(22)	/* Beacon DMA Interrupt 2 */
+#define	IMR_BCNDMAINT1		BIT(21)	/* Beacon DMA Interrupt 1 */
+#define	IMR_BCNDOK7		BIT(20)	/* Beacon Queue DMA OK Interrup 7 */
+#define	IMR_BCNDOK6		BIT(19)	/* Beacon Queue DMA OK Interrup 6 */
+#define	IMR_BCNDOK5		BIT(18)	/* Beacon Queue DMA OK Interrup 5 */
+#define	IMR_BCNDOK4		BIT(17)	/* Beacon Queue DMA OK Interrup 4 */
+#define	IMR_BCNDOK3		BIT(16)	/* Beacon Queue DMA OK Interrup 3 */
+#define	IMR_BCNDOK2		BIT(15)	/* Beacon Queue DMA OK Interrup 2 */
+#define	IMR_BCNDOK1		BIT(14)	/* Beacon Queue DMA OK Interrup 1 */
+#define	IMR_ATIMEND_E		BIT(13)	/* ATIM Window End Extension for Win7 */
+#define	IMR_TXERR		BIT(11)	/* Tx Error Flag Interrupt Status,
+					 * write 1 clear.
+					 */
+#define	IMR_RXERR		BIT(10)	/* Rx Error Flag INT Status,
+					 * Write 1 clear
+					 */
+#define	IMR_TXFOVW		BIT(9)	/* Transmit FIFO Overflow */
+#define	IMR_RXFOVW		BIT(8)	/* Receive FIFO Overflow */
+
+#define	HWSET_MAX_SIZE			512
+#define EFUSE_MAX_SECTION		64
+#define EFUSE_REAL_CONTENT_LEN		256
+#define EFUSE_OOB_PROTECT_BYTES		18 /* PG data exclude header,
+					    * dummy 7 bytes frome CP test
+					    * and reserved 1byte.
+					    */
+
+#define	EEPROM_DEFAULT_TSSI			0x0
+#define EEPROM_DEFAULT_TXPOWERDIFF		0x0
+#define EEPROM_DEFAULT_CRYSTALCAP		0x5
+#define EEPROM_DEFAULT_BOARDTYPE		0x02
+#define EEPROM_DEFAULT_TXPOWER			0x1010
+#define	EEPROM_DEFAULT_HT2T_TXPWR		0x10
+
+#define	EEPROM_DEFAULT_LEGACYHTTXPOWERDIFF	0x3
+#define	EEPROM_DEFAULT_THERMALMETER		0x18
+#define	EEPROM_DEFAULT_ANTTXPOWERDIFF		0x0
+#define	EEPROM_DEFAULT_TXPWDIFF_CRYSTALCAP	0x5
+#define	EEPROM_DEFAULT_TXPOWERLEVEL		0x22
+#define	EEPROM_DEFAULT_HT40_2SDIFF		0x0
+#define EEPROM_DEFAULT_HT20_DIFF		2
+#define	EEPROM_DEFAULT_LEGACYHTTXPOWERDIFF	0x3
+#define EEPROM_DEFAULT_HT40_PWRMAXOFFSET	0
+#define EEPROM_DEFAULT_HT20_PWRMAXOFFSET	0
+
+#define RF_OPTION1				0x79
+#define RF_OPTION2				0x7A
+#define RF_OPTION3				0x7B
+#define RF_OPTION4				0xC3
+
+#define EEPROM_DEFAULT_PID			0x1234
+#define EEPROM_DEFAULT_VID			0x5678
+#define EEPROM_DEFAULT_CUSTOMERID		0xAB
+#define EEPROM_DEFAULT_SUBCUSTOMERID		0xCD
+#define EEPROM_DEFAULT_VERSION			0
+
+#define	EEPROM_CHANNEL_PLAN_FCC			0x0
+#define	EEPROM_CHANNEL_PLAN_IC			0x1
+#define	EEPROM_CHANNEL_PLAN_ETSI		0x2
+#define	EEPROM_CHANNEL_PLAN_SPAIN		0x3
+#define	EEPROM_CHANNEL_PLAN_FRANCE		0x4
+#define	EEPROM_CHANNEL_PLAN_MKK			0x5
+#define	EEPROM_CHANNEL_PLAN_MKK1		0x6
+#define	EEPROM_CHANNEL_PLAN_ISRAEL		0x7
+#define	EEPROM_CHANNEL_PLAN_TELEC		0x8
+#define	EEPROM_CHANNEL_PLAN_GLOBAL_DOMAIN	0x9
+#define	EEPROM_CHANNEL_PLAN_WORLD_WIDE_13	0xA
+#define	EEPROM_CHANNEL_PLAN_NCC			0xB
+#define	EEPROM_CHANNEL_PLAN_BY_HW_MASK		0x80
+
+#define EEPROM_CID_DEFAULT			0x0
+#define EEPROM_CID_TOSHIBA			0x4
+#define	EEPROM_CID_CCX				0x10
+#define	EEPROM_CID_QMI				0x0D
+#define EEPROM_CID_WHQL				0xFE
+
+#define	RTL8723BE_EEPROM_ID			0x8129
+
+#define EEPROM_HPON				0x02
+#define EEPROM_CLK				0x06
+#define EEPROM_TESTR				0x08
+
+
+#define EEPROM_TXPOWERCCK			0x10
+#define	EEPROM_TXPOWERHT40_1S			0x16
+#define EEPROM_TXPOWERHT20DIFF			0x1B
+#define EEPROM_TXPOWER_OFDMDIFF			0x1B
+
+
+
+#define	EEPROM_TX_PWR_INX			0x10
+
+#define	EEPROM_CHANNELPLAN			0xB8
+#define	EEPROM_XTAL_8723BE			0xB9
+#define	EEPROM_THERMAL_METER_88E		0xBA
+#define	EEPROM_IQK_LCK_88E			0xBB
+
+#define	EEPROM_RF_BOARD_OPTION_88E		0xC1
+#define	EEPROM_RF_FEATURE_OPTION_88E		0xC2
+#define	EEPROM_RF_BT_SETTING_88E		0xC3
+#define	EEPROM_VERSION				0xC4
+#define	EEPROM_CUSTOMER_ID			0xC5
+#define	EEPROM_RF_ANTENNA_OPT_88E		0xC9
+
+#define	EEPROM_MAC_ADDR				0xD0
+#define EEPROM_VID				0xD6
+#define EEPROM_DID				0xD8
+#define EEPROM_SVID				0xDA
+#define EEPROM_SMID				0xDC
+
+#define	STOPBECON				BIT(6)
+#define	STOPHIGHT				BIT(5)
+#define	STOPMGT					BIT(4)
+#define	STOPVO					BIT(3)
+#define	STOPVI					BIT(2)
+#define	STOPBE					BIT(1)
+#define	STOPBK					BIT(0)
+
+#define	RCR_APPFCS				BIT(31)
+#define	RCR_APP_MIC				BIT(30)
+#define	RCR_APP_ICV				BIT(29)
+#define	RCR_APP_PHYST_RXFF			BIT(28)
+#define	RCR_APP_BA_SSN				BIT(27)
+#define	RCR_ENMBID				BIT(24)
+#define	RCR_LSIGEN				BIT(23)
+#define	RCR_MFBEN				BIT(22)
+#define	RCR_HTC_LOC_CTRL			BIT(14)
+#define	RCR_AMF					BIT(13)
+#define	RCR_ACF					BIT(12)
+#define	RCR_ADF					BIT(11)
+#define	RCR_AICV				BIT(9)
+#define	RCR_ACRC32				BIT(8)
+#define	RCR_CBSSID_BCN				BIT(7)
+#define	RCR_CBSSID_DATA				BIT(6)
+#define	RCR_CBSSID				RCR_CBSSID_DATA
+#define	RCR_APWRMGT				BIT(5)
+#define	RCR_ADD3				BIT(4)
+#define	RCR_AB					BIT(3)
+#define	RCR_AM					BIT(2)
+#define	RCR_APM					BIT(1)
+#define	RCR_AAP					BIT(0)
+#define	RCR_MXDMA_OFFSET			8
+#define	RCR_FIFO_OFFSET				13
+
+#define RSV_CTRL				0x001C
+#define RD_CTRL					0x0524
+
+#define REG_USB_INFO				0xFE17
+#define REG_USB_SPECIAL_OPTION			0xFE55
+#define REG_USB_DMA_AGG_TO			0xFE5B
+#define REG_USB_AGG_TO				0xFE5C
+#define REG_USB_AGG_TH				0xFE5D
+
+#define REG_USB_VID				0xFE60
+#define REG_USB_PID				0xFE62
+#define REG_USB_OPTIONAL			0xFE64
+#define REG_USB_CHIRP_K				0xFE65
+#define REG_USB_PHY				0xFE66
+#define REG_USB_MAC_ADDR			0xFE70
+#define REG_USB_HRPWM				0xFE58
+#define REG_USB_HCPWM				0xFE57
+
+#define SW18_FPWM				BIT(3)
+
+#define ISO_MD2PP				BIT(0)
+#define ISO_UA2USB				BIT(1)
+#define ISO_UD2CORE				BIT(2)
+#define ISO_PA2PCIE				BIT(3)
+#define ISO_PD2CORE				BIT(4)
+#define ISO_IP2MAC				BIT(5)
+#define ISO_DIOP				BIT(6)
+#define ISO_DIOE				BIT(7)
+#define ISO_EB2CORE				BIT(8)
+#define ISO_DIOR				BIT(9)
+
+#define PWC_EV25V				BIT(14)
+#define PWC_EV12V				BIT(15)
+
+#define FEN_BBRSTB				BIT(0)
+#define FEN_BB_GLB_RSTN				BIT(1)
+#define FEN_USBA				BIT(2)
+#define FEN_UPLL				BIT(3)
+#define FEN_USBD				BIT(4)
+#define FEN_DIO_PCIE				BIT(5)
+#define FEN_PCIEA				BIT(6)
+#define FEN_PPLL				BIT(7)
+#define FEN_PCIED				BIT(8)
+#define FEN_DIOE				BIT(9)
+#define FEN_CPUEN				BIT(10)
+#define FEN_DCORE				BIT(11)
+#define FEN_ELDR				BIT(12)
+#define FEN_DIO_RF				BIT(13)
+#define FEN_HWPDN				BIT(14)
+#define FEN_MREGEN				BIT(15)
+
+#define PFM_LDALL				BIT(0)
+#define PFM_ALDN				BIT(1)
+#define PFM_LDKP				BIT(2)
+#define PFM_WOWL				BIT(3)
+#define ENPDN					BIT(4)
+#define PDN_PL					BIT(5)
+#define APFM_ONMAC				BIT(8)
+#define APFM_OFF				BIT(9)
+#define APFM_RSM				BIT(10)
+#define AFSM_HSUS				BIT(11)
+#define AFSM_PCIE				BIT(12)
+#define APDM_MAC				BIT(13)
+#define APDM_HOST				BIT(14)
+#define APDM_HPDN				BIT(15)
+#define RDY_MACON				BIT(16)
+#define SUS_HOST				BIT(17)
+#define ROP_ALD					BIT(20)
+#define ROP_PWR					BIT(21)
+#define ROP_SPS					BIT(22)
+#define SOP_MRST				BIT(25)
+#define SOP_FUSE				BIT(26)
+#define SOP_ABG					BIT(27)
+#define SOP_AMB					BIT(28)
+#define SOP_RCK					BIT(29)
+#define SOP_A8M					BIT(30)
+#define XOP_BTCK				BIT(31)
+
+#define ANAD16V_EN				BIT(0)
+#define ANA8M					BIT(1)
+#define MACSLP					BIT(4)
+#define LOADER_CLK_EN				BIT(5)
+#define _80M_SSC_DIS				BIT(7)
+#define _80M_SSC_EN_HO				BIT(8)
+#define PHY_SSC_RSTB				BIT(9)
+#define SEC_CLK_EN				BIT(10)
+#define MAC_CLK_EN				BIT(11)
+#define SYS_CLK_EN				BIT(12)
+#define RING_CLK_EN				BIT(13)
+
+#define	BOOT_FROM_EEPROM			BIT(4)
+#define	EEPROM_EN				BIT(5)
+
+#define AFE_BGEN				BIT(0)
+#define AFE_MBEN				BIT(1)
+#define MAC_ID_EN				BIT(7)
+
+#define WLOCK_ALL				BIT(0)
+#define WLOCK_00				BIT(1)
+#define WLOCK_04				BIT(2)
+#define WLOCK_08				BIT(3)
+#define WLOCK_40				BIT(4)
+#define R_DIS_PRST_0				BIT(5)
+#define R_DIS_PRST_1				BIT(6)
+#define LOCK_ALL_EN				BIT(7)
+
+#define RF_EN					BIT(0)
+#define RF_RSTB					BIT(1)
+#define RF_SDMRSTB				BIT(2)
+
+#define LDA15_EN				BIT(0)
+#define LDA15_STBY				BIT(1)
+#define LDA15_OBUF				BIT(2)
+#define LDA15_REG_VOS				BIT(3)
+#define _LDA15_VOADJ(x)				(((x) & 0x7) << 4)
+
+#define LDV12_EN				BIT(0)
+#define LDV12_SDBY				BIT(1)
+#define LPLDO_HSM				BIT(2)
+#define LPLDO_LSM_DIS				BIT(3)
+#define _LDV12_VADJ(x)				(((x) & 0xF) << 4)
+
+#define XTAL_EN					BIT(0)
+#define XTAL_BSEL				BIT(1)
+#define _XTAL_BOSC(x)				(((x) & 0x3) << 2)
+#define _XTAL_CADJ(x)				(((x) & 0xF) << 4)
+#define XTAL_GATE_USB				BIT(8)
+#define _XTAL_USB_DRV(x)			(((x) & 0x3) << 9)
+#define XTAL_GATE_AFE				BIT(11)
+#define _XTAL_AFE_DRV(x)			(((x) & 0x3) << 12)
+#define XTAL_RF_GATE				BIT(14)
+#define _XTAL_RF_DRV(x)				(((x) & 0x3) << 15)
+#define XTAL_GATE_DIG				BIT(17)
+#define _XTAL_DIG_DRV(x)			(((x) & 0x3) << 18)
+#define XTAL_BT_GATE				BIT(20)
+#define _XTAL_BT_DRV(x)				(((x) & 0x3) << 21)
+#define _XTAL_GPIO(x)				(((x) & 0x7) << 23)
+
+#define CKDLY_AFE				BIT(26)
+#define CKDLY_USB				BIT(27)
+#define CKDLY_DIG				BIT(28)
+#define CKDLY_BT				BIT(29)
+
+#define APLL_EN					BIT(0)
+#define APLL_320_EN				BIT(1)
+#define APLL_FREF_SEL				BIT(2)
+#define APLL_EDGE_SEL				BIT(3)
+#define APLL_WDOGB				BIT(4)
+#define APLL_LPFEN				BIT(5)
+
+#define APLL_REF_CLK_13MHZ			0x1
+#define APLL_REF_CLK_19_2MHZ			0x2
+#define APLL_REF_CLK_20MHZ			0x3
+#define APLL_REF_CLK_25MHZ			0x4
+#define APLL_REF_CLK_26MHZ			0x5
+#define APLL_REF_CLK_38_4MHZ			0x6
+#define APLL_REF_CLK_40MHZ			0x7
+
+#define APLL_320EN				BIT(14)
+#define APLL_80EN				BIT(15)
+#define APLL_1MEN				BIT(24)
+
+#define ALD_EN					BIT(18)
+#define EF_PD					BIT(19)
+#define EF_FLAG					BIT(31)
+
+#define EF_TRPT					BIT(7)
+#define LDOE25_EN				BIT(31)
+
+#define RSM_EN					BIT(0)
+#define TIMER_EN				BIT(4)
+
+#define TRSW0EN					BIT(2)
+#define TRSW1EN					BIT(3)
+#define EROM_EN					BIT(4)
+#define ENBT					BIT(5)
+#define ENUART					BIT(8)
+#define UART_910				BIT(9)
+#define ENPMAC					BIT(10)
+#define SIC_SWRST				BIT(11)
+#define ENSIC					BIT(12)
+#define SIC_23					BIT(13)
+#define ENHDP					BIT(14)
+#define SIC_LBK					BIT(15)
+
+#define LED0PL					BIT(4)
+#define LED1PL					BIT(12)
+#define LED0DIS					BIT(7)
+
+#define MCUFWDL_EN				BIT(0)
+#define MCUFWDL_RDY				BIT(1)
+#define FWDL_CHKSUM_RPT				BIT(2)
+#define MACINI_RDY				BIT(3)
+#define BBINI_RDY				BIT(4)
+#define RFINI_RDY				BIT(5)
+#define WINTINI_RDY				BIT(6)
+#define CPRST					BIT(23)
+
+#define XCLK_VLD				BIT(0)
+#define ACLK_VLD				BIT(1)
+#define UCLK_VLD				BIT(2)
+#define PCLK_VLD				BIT(3)
+#define PCIRSTB					BIT(4)
+#define V15_VLD					BIT(5)
+#define TRP_B15V_EN				BIT(7)
+#define SIC_IDLE				BIT(8)
+#define BD_MAC2					BIT(9)
+#define BD_MAC1					BIT(10)
+#define IC_MACPHY_MODE				BIT(11)
+#define VENDOR_ID				BIT(19)
+#define PAD_HWPD_IDN				BIT(22)
+#define TRP_VAUX_EN				BIT(23)
+#define TRP_BT_EN				BIT(24)
+#define BD_PKG_SEL				BIT(25)
+#define BD_HCI_SEL				BIT(26)
+#define TYPE_ID					BIT(27)
+
+#define CHIP_VER_RTL_MASK			0xF000
+#define CHIP_VER_RTL_SHIFT			12
+
+#define REG_LBMODE				(REG_CR + 3)
+
+#define HCI_TXDMA_EN				BIT(0)
+#define HCI_RXDMA_EN				BIT(1)
+#define TXDMA_EN				BIT(2)
+#define RXDMA_EN				BIT(3)
+#define PROTOCOL_EN				BIT(4)
+#define SCHEDULE_EN				BIT(5)
+#define MACTXEN					BIT(6)
+#define MACRXEN					BIT(7)
+#define ENSWBCN					BIT(8)
+#define ENSEC					BIT(9)
+
+#define _NETTYPE(x)				(((x) & 0x3) << 16)
+#define MASK_NETTYPE				0x30000
+#define NT_NO_LINK				0x0
+#define NT_LINK_AD_HOC				0x1
+#define NT_LINK_AP				0x2
+#define NT_AS_AP				0x3
+
+#define _LBMODE(x)				(((x) & 0xF) << 24)
+#define MASK_LBMODE				0xF000000
+#define LOOPBACK_NORMAL				0x0
+#define LOOPBACK_IMMEDIATELY			0xB
+#define LOOPBACK_MAC_DELAY			0x3
+#define LOOPBACK_PHY				0x1
+#define LOOPBACK_DMA				0x7
+
+#define GET_RX_PAGE_SIZE(value)			((value) & 0xF)
+#define GET_TX_PAGE_SIZE(value)			(((value) & 0xF0) >> 4)
+#define _PSRX_MASK				0xF
+#define _PSTX_MASK				0xF0
+#define _PSRX(x)				(x)
+#define _PSTX(x)				((x) << 4)
+
+#define PBP_64					0x0
+#define PBP_128					0x1
+#define PBP_256					0x2
+#define PBP_512					0x3
+#define PBP_1024				0x4
+
+#define RXDMA_ARBBW_EN				BIT(0)
+#define RXSHFT_EN				BIT(1)
+#define RXDMA_AGG_EN				BIT(2)
+#define QS_VO_QUEUE				BIT(8)
+#define QS_VI_QUEUE				BIT(9)
+#define QS_BE_QUEUE				BIT(10)
+#define QS_BK_QUEUE				BIT(11)
+#define QS_MANAGER_QUEUE			BIT(12)
+#define QS_HIGH_QUEUE				BIT(13)
+
+#define HQSEL_VOQ				BIT(0)
+#define HQSEL_VIQ				BIT(1)
+#define HQSEL_BEQ				BIT(2)
+#define HQSEL_BKQ				BIT(3)
+#define HQSEL_MGTQ				BIT(4)
+#define HQSEL_HIQ				BIT(5)
+
+#define _TXDMA_HIQ_MAP(x)			(((x)&0x3) << 14)
+#define _TXDMA_MGQ_MAP(x)			(((x)&0x3) << 12)
+#define _TXDMA_BKQ_MAP(x)			(((x)&0x3) << 10)
+#define _TXDMA_BEQ_MAP(x)			(((x)&0x3) << 8)
+#define _TXDMA_VIQ_MAP(x)			(((x)&0x3) << 6)
+#define _TXDMA_VOQ_MAP(x)			(((x)&0x3) << 4)
+
+#define QUEUE_LOW				1
+#define QUEUE_NORMAL				2
+#define QUEUE_HIGH				3
+
+#define _LLT_NO_ACTIVE				0x0
+#define _LLT_WRITE_ACCESS			0x1
+#define _LLT_READ_ACCESS			0x2
+
+#define _LLT_INIT_DATA(x)			((x) & 0xFF)
+#define _LLT_INIT_ADDR(x)			(((x) & 0xFF) << 8)
+#define _LLT_OP(x)				(((x) & 0x3) << 30)
+#define _LLT_OP_VALUE(x)			(((x) >> 30) & 0x3)
+
+#define BB_WRITE_READ_MASK			(BIT(31) | BIT(30))
+#define BB_WRITE_EN				BIT(30)
+#define BB_READ_EN				BIT(31)
+
+#define _HPQ(x)					((x) & 0xFF)
+#define _LPQ(x)					(((x) & 0xFF) << 8)
+#define _PUBQ(x)				(((x) & 0xFF) << 16)
+#define _NPQ(x)					((x) & 0xFF)
+
+#define HPQ_PUBLIC_DIS				BIT(24)
+#define LPQ_PUBLIC_DIS				BIT(25)
+#define LD_RQPN					BIT(31)
+
+#define BCN_VALID				BIT(16)
+#define BCN_HEAD(x)				(((x) & 0xFF) << 8)
+#define	BCN_HEAD_MASK				0xFF00
+
+#define BLK_DESC_NUM_SHIFT			4
+#define BLK_DESC_NUM_MASK			0xF
+
+#define DROP_DATA_EN				BIT(9)
+
+#define EN_AMPDU_RTY_NEW			BIT(7)
+
+#define _INIRTSMCS_SEL(x)			((x) & 0x3F)
+
+#define _SPEC_SIFS_CCK(x)			((x) & 0xFF)
+#define _SPEC_SIFS_OFDM(x)			(((x) & 0xFF) << 8)
+
+#define RATE_REG_BITMAP_ALL			0xFFFFF
+
+#define _RRSC_BITMAP(x)				((x) & 0xFFFFF)
+
+#define _RRSR_RSC(x)				(((x) & 0x3) << 21)
+#define RRSR_RSC_RESERVED			0x0
+#define RRSR_RSC_UPPER_SUBCHANNEL		0x1
+#define RRSR_RSC_LOWER_SUBCHANNEL		0x2
+#define RRSR_RSC_DUPLICATE_MODE			0x3
+
+#define USE_SHORT_G1				BIT(20)
+
+#define _AGGLMT_MCS0(x)				((x) & 0xF)
+#define _AGGLMT_MCS1(x)				(((x) & 0xF) << 4)
+#define _AGGLMT_MCS2(x)				(((x) & 0xF) << 8)
+#define _AGGLMT_MCS3(x)				(((x) & 0xF) << 12)
+#define _AGGLMT_MCS4(x)				(((x) & 0xF) << 16)
+#define _AGGLMT_MCS5(x)				(((x) & 0xF) << 20)
+#define _AGGLMT_MCS6(x)				(((x) & 0xF) << 24)
+#define _AGGLMT_MCS7(x)				(((x) & 0xF) << 28)
+
+#define	RETRY_LIMIT_SHORT_SHIFT			8
+#define	RETRY_LIMIT_LONG_SHIFT			0
+
+#define _DARF_RC1(x)				((x) & 0x1F)
+#define _DARF_RC2(x)				(((x) & 0x1F) << 8)
+#define _DARF_RC3(x)				(((x) & 0x1F) << 16)
+#define _DARF_RC4(x)				(((x) & 0x1F) << 24)
+#define _DARF_RC5(x)				((x) & 0x1F)
+#define _DARF_RC6(x)				(((x) & 0x1F) << 8)
+#define _DARF_RC7(x)				(((x) & 0x1F) << 16)
+#define _DARF_RC8(x)				(((x) & 0x1F) << 24)
+
+#define _RARF_RC1(x)				((x) & 0x1F)
+#define _RARF_RC2(x)				(((x) & 0x1F) << 8)
+#define _RARF_RC3(x)				(((x) & 0x1F) << 16)
+#define _RARF_RC4(x)				(((x) & 0x1F) << 24)
+#define _RARF_RC5(x)				((x) & 0x1F)
+#define _RARF_RC6(x)				(((x) & 0x1F) << 8)
+#define _RARF_RC7(x)				(((x) & 0x1F) << 16)
+#define _RARF_RC8(x)				(((x) & 0x1F) << 24)
+
+#define AC_PARAM_TXOP_LIMIT_OFFSET		16
+#define AC_PARAM_ECW_MAX_OFFSET			12
+#define AC_PARAM_ECW_MIN_OFFSET			8
+#define AC_PARAM_AIFS_OFFSET			0
+
+#define _AIFS(x)				(x)
+#define _ECW_MAX_MIN(x)				((x) << 8)
+#define _TXOP_LIMIT(x)				((x) << 16)
+
+#define _BCNIFS(x)				((x) & 0xFF)
+#define _BCNECW(x)				((((x) & 0xF)) << 8)
+
+#define _LRL(x)					((x) & 0x3F)
+#define _SRL(x)					(((x) & 0x3F) << 8)
+
+#define _SIFS_CCK_CTX(x)			((x) & 0xFF)
+#define _SIFS_CCK_TRX(x)			(((x) & 0xFF) << 8)
+
+#define _SIFS_OFDM_CTX(x)			((x) & 0xFF)
+#define _SIFS_OFDM_TRX(x)			(((x) & 0xFF) << 8)
+
+#define _TBTT_PROHIBIT_HOLD(x)			(((x) & 0xFF) << 8)
+
+#define DIS_EDCA_CNT_DWN			BIT(11)
+
+#define EN_MBSSID				BIT(1)
+#define EN_TXBCN_RPT				BIT(2)
+#define	EN_BCN_FUNCTION				BIT(3)
+
+#define TSFTR_RST				BIT(0)
+#define TSFTR1_RST				BIT(1)
+
+#define STOP_BCNQ				BIT(6)
+
+#define	DIS_TSF_UDT0_NORMAL_CHIP		BIT(4)
+#define	DIS_TSF_UDT0_TEST_CHIP			BIT(5)
+
+#define	ACMHW_HWEN				BIT(0)
+#define	ACMHW_BEQEN				BIT(1)
+#define	ACMHW_VIQEN				BIT(2)
+#define	ACMHW_VOQEN				BIT(3)
+#define	ACMHW_BEQSTATUS				BIT(4)
+#define	ACMHW_VIQSTATUS				BIT(5)
+#define	ACMHW_VOQSTATUS				BIT(6)
+
+#define APSDOFF					BIT(6)
+#define APSDOFF_STATUS				BIT(7)
+
+#define BW_20MHZ				BIT(2)
+
+#define RATE_BITMAP_ALL				0xFFFFF
+
+#define RATE_RRSR_CCK_ONLY_1M			0xFFFF1
+
+#define TSFRST					BIT(0)
+#define DIS_GCLK				BIT(1)
+#define PAD_SEL					BIT(2)
+#define PWR_ST					BIT(6)
+#define PWRBIT_OW_EN				BIT(7)
+#define ACRC					BIT(8)
+#define CFENDFORM				BIT(9)
+#define ICV					BIT(10)
+
+#define AAP					BIT(0)
+#define APM					BIT(1)
+#define AM					BIT(2)
+#define AB					BIT(3)
+#define ADD3					BIT(4)
+#define APWRMGT					BIT(5)
+#define CBSSID					BIT(6)
+#define CBSSID_DATA				BIT(6)
+#define CBSSID_BCN				BIT(7)
+#define ACRC32					BIT(8)
+#define AICV					BIT(9)
+#define ADF					BIT(11)
+#define ACF					BIT(12)
+#define AMF					BIT(13)
+#define HTC_LOC_CTRL				BIT(14)
+#define UC_DATA_EN				BIT(16)
+#define BM_DATA_EN				BIT(17)
+#define MFBEN					BIT(22)
+#define LSIGEN					BIT(23)
+#define ENMBID					BIT(24)
+#define APP_BASSN				BIT(27)
+#define APP_PHYSTS				BIT(28)
+#define APP_ICV					BIT(29)
+#define APP_MIC					BIT(30)
+#define APP_FCS					BIT(31)
+
+#define _MIN_SPACE(x)			((x) & 0x7)
+#define _SHORT_GI_PADDING(x)		(((x) & 0x1F) << 3)
+
+#define RXERR_TYPE_OFDM_PPDU		0
+#define RXERR_TYPE_OFDM_FALSE_ALARM	1
+#define	RXERR_TYPE_OFDM_MPDU_OK		2
+#define RXERR_TYPE_OFDM_MPDU_FAIL	3
+#define RXERR_TYPE_CCK_PPDU		4
+#define RXERR_TYPE_CCK_FALSE_ALARM	5
+#define RXERR_TYPE_CCK_MPDU_OK		6
+#define RXERR_TYPE_CCK_MPDU_FAIL	7
+#define RXERR_TYPE_HT_PPDU		8
+#define RXERR_TYPE_HT_FALSE_ALARM	9
+#define RXERR_TYPE_HT_MPDU_TOTAL	10
+#define RXERR_TYPE_HT_MPDU_OK		11
+#define RXERR_TYPE_HT_MPDU_FAIL		12
+#define RXERR_TYPE_RX_FULL_DROP		15
+
+#define RXERR_COUNTER_MASK		0xFFFFF
+#define RXERR_RPT_RST			BIT(27)
+#define _RXERR_RPT_SEL(type)		((type) << 28)
+
+#define	SCR_TXUSEDK			BIT(0)
+#define	SCR_RXUSEDK			BIT(1)
+#define	SCR_TXENCENABLE			BIT(2)
+#define	SCR_RXDECENABLE			BIT(3)
+#define	SCR_SKBYA2			BIT(4)
+#define	SCR_NOSKMC			BIT(5)
+#define SCR_TXBCUSEDK			BIT(6)
+#define SCR_RXBCUSEDK			BIT(7)
+
+#define XCLK_VLD			BIT(0)
+#define ACLK_VLD			BIT(1)
+#define UCLK_VLD			BIT(2)
+#define PCLK_VLD			BIT(3)
+#define PCIRSTB				BIT(4)
+#define V15_VLD				BIT(5)
+#define TRP_B15V_EN			BIT(7)
+#define SIC_IDLE			BIT(8)
+#define BD_MAC2				BIT(9)
+#define BD_MAC1				BIT(10)
+#define IC_MACPHY_MODE			BIT(11)
+#define BT_FUNC				BIT(16)
+#define VENDOR_ID			BIT(19)
+#define PAD_HWPD_IDN			BIT(22)
+#define TRP_VAUX_EN			BIT(23)
+#define TRP_BT_EN			BIT(24)
+#define BD_PKG_SEL			BIT(25)
+#define BD_HCI_SEL			BIT(26)
+#define TYPE_ID				BIT(27)
+
+#define USB_IS_HIGH_SPEED		0
+#define USB_IS_FULL_SPEED		1
+#define USB_SPEED_MASK			BIT(5)
+
+#define USB_NORMAL_SIE_EP_MASK		0xF
+#define USB_NORMAL_SIE_EP_SHIFT		4
+
+#define USB_TEST_EP_MASK		0x30
+#define USB_TEST_EP_SHIFT		4
+
+#define USB_AGG_EN			BIT(3)
+
+#define MAC_ADDR_LEN			6
+#define LAST_ENTRY_OF_TX_PKT_BUFFER	175/*255    88e*/
+
+#define POLLING_LLT_THRESHOLD		20
+#define POLLING_READY_TIMEOUT_COUNT	3000
+
+#define	MAX_MSS_DENSITY_2T		0x13
+#define	MAX_MSS_DENSITY_1T		0x0A
+
+#define EPROM_CMD_OPERATING_MODE_MASK	((1<<7)|(1<<6))
+#define EPROM_CMD_CONFIG		0x3
+#define EPROM_CMD_LOAD			1
+
+#define	HWSET_MAX_SIZE_92S		HWSET_MAX_SIZE
+
+#define	HAL_8192C_HW_GPIO_WPS_BIT	BIT(2)
+
+#define	RPMAC_RESET			0x100
+#define	RPMAC_TXSTART			0x104
+#define	RPMAC_TXLEGACYSIG		0x108
+#define	RPMAC_TXHTSIG1			0x10c
+#define	RPMAC_TXHTSIG2			0x110
+#define	RPMAC_PHYDEBUG			0x114
+#define	RPMAC_TXPACKETNUM		0x118
+#define	RPMAC_TXIDLE			0x11c
+#define	RPMAC_TXMACHEADER0		0x120
+#define	RPMAC_TXMACHEADER1		0x124
+#define	RPMAC_TXMACHEADER2		0x128
+#define	RPMAC_TXMACHEADER3		0x12c
+#define	RPMAC_TXMACHEADER4		0x130
+#define	RPMAC_TXMACHEADER5		0x134
+#define	RPMAC_TXDADATYPE		0x138
+#define	RPMAC_TXRANDOMSEED		0x13c
+#define	RPMAC_CCKPLCPPREAMBLE		0x140
+#define	RPMAC_CCKPLCPHEADER		0x144
+#define	RPMAC_CCKCRC16			0x148
+#define	RPMAC_OFDMRXCRC32OK		0x170
+#define	RPMAC_OFDMRXCRC32ER		0x174
+#define	RPMAC_OFDMRXPARITYER		0x178
+#define	RPMAC_OFDMRXCRC8ER		0x17c
+#define	RPMAC_CCKCRXRC16ER		0x180
+#define	RPMAC_CCKCRXRC32ER		0x184
+#define	RPMAC_CCKCRXRC32OK		0x188
+#define	RPMAC_TXSTATUS			0x18c
+
+#define	RFPGA0_RFMOD			0x800
+
+#define	RFPGA0_TXINFO			0x804
+#define	RFPGA0_PSDFUNCTION		0x808
+
+#define	RFPGA0_TXGAINSTAGE		0x80c
+
+#define	RFPGA0_RFTIMING1		0x810
+#define	RFPGA0_RFTIMING2		0x814
+
+#define	RFPGA0_XA_HSSIPARAMETER1	0x820
+#define	RFPGA0_XA_HSSIPARAMETER2	0x824
+#define	RFPGA0_XB_HSSIPARAMETER1	0x828
+#define	RFPGA0_XB_HSSIPARAMETER2	0x82c
+
+#define	RFPGA0_XA_LSSIPARAMETER		0x840
+#define	RFPGA0_XB_LSSIPARAMETER		0x844
+
+#define	RFPGA0_RFWAKEUPPARAMETER	0x850
+#define	RFPGA0_RFSLEEPUPPARAMETER	0x854
+
+#define	RFPGA0_XAB_SWITCHCONTROL	0x858
+#define	RFPGA0_XCD_SWITCHCONTROL	0x85c
+
+#define	RFPGA0_XA_RFINTERFACEOE		0x860
+#define	RFPGA0_XB_RFINTERFACEOE		0x864
+
+#define	RFPGA0_XAB_RFINTERFACESW	0x870
+#define	RFPGA0_XCD_RFINTERFACESW	0x874
+
+#define	RFPGA0_XAB_RFPARAMETER		0x878
+#define	RFPGA0_XCD_RFPARAMETER		0x87c
+
+#define	RFPGA0_ANALOGPARAMETER1		0x880
+#define	RFPGA0_ANALOGPARAMETER2		0x884
+#define	RFPGA0_ANALOGPARAMETER3		0x888
+#define	RFPGA0_ANALOGPARAMETER4		0x88c
+
+#define	RFPGA0_XA_LSSIREADBACK		0x8a0
+#define	RFPGA0_XB_LSSIREADBACK		0x8a4
+#define	RFPGA0_XC_LSSIREADBACK		0x8a8
+#define	RFPGA0_XD_LSSIREADBACK		0x8ac
+
+#define	RFPGA0_PSDREPORT		0x8b4
+#define	TRANSCEIVEA_HSPI_READBACK	0x8b8
+#define	TRANSCEIVEB_HSPI_READBACK	0x8bc
+#define	REG_SC_CNT			0x8c4
+#define	RFPGA0_XAB_RFINTERFACERB	0x8e0
+#define	RFPGA0_XCD_RFINTERFACERB	0x8e4
+
+#define	RFPGA1_RFMOD			0x900
+
+#define	RFPGA1_TXBLOCK			0x904
+#define	RFPGA1_DEBUGSELECT		0x908
+#define	RFPGA1_TXINFO			0x90c
+
+#define	RCCK0_SYSTEM			0xa00
+
+#define	RCCK0_AFESETTING		0xa04
+#define	RCCK0_CCA			0xa08
+
+#define	RCCK0_RXAGC1			0xa0c
+#define	RCCK0_RXAGC2			0xa10
+
+#define	RCCK0_RXHP			0xa14
+
+#define	RCCK0_DSPPARAMETER1		0xa18
+#define	RCCK0_DSPPARAMETER2		0xa1c
+
+#define	RCCK0_TXFILTER1			0xa20
+#define	RCCK0_TXFILTER2			0xa24
+#define	RCCK0_DEBUGPORT			0xa28
+#define	RCCK0_FALSEALARMREPORT		0xa2c
+#define	RCCK0_TRSSIREPORT		0xa50
+#define	RCCK0_RXREPORT			0xa54
+#define	RCCK0_FACOUNTERLOWER		0xa5c
+#define	RCCK0_FACOUNTERUPPER		0xa58
+#define	RCCK0_CCA_CNT			0xa60
+
+
+/* PageB(0xB00) */
+#define	RPDP_ANTA			0xb00
+#define	RPDP_ANTA_4			0xb04
+#define	RPDP_ANTA_8			0xb08
+#define	RPDP_ANTA_C			0xb0c
+#define	RPDP_ANTA_10			0xb10
+#define	RPDP_ANTA_14			0xb14
+#define	RPDP_ANTA_18			0xb18
+#define	RPDP_ANTA_1C			0xb1c
+#define	RPDP_ANTA_20			0xb20
+#define	RPDP_ANTA_24			0xb24
+
+#define	RCONFIG_PMPD_ANTA		0xb28
+#define	CONFIG_RAM64X16			0xb2c
+
+#define	RBNDA				0xb30
+#define	RHSSIPAR			0xb34
+
+#define	RCONFIG_ANTA			0xb68
+#define	RCONFIG_ANTB			0xb6c
+
+#define	RPDP_ANTB			0xb70
+#define	RPDP_ANTB_4			0xb74
+#define	RPDP_ANTB_8			0xb78
+#define	RPDP_ANTB_C			0xb7c
+#define	RPDP_ANTB_10			0xb80
+#define	RPDP_ANTB_14			0xb84
+#define	RPDP_ANTB_18			0xb88
+#define	RPDP_ANTB_1C			0xb8c
+#define	RPDP_ANTB_20			0xb90
+#define	RPDP_ANTB_24			0xb94
+
+#define	RCONFIG_PMPD_ANTB		0xb98
+
+#define	RBNDB				0xba0
+
+#define	RAPK				0xbd8
+#define	RPM_RX0_ANTA			0xbdc
+#define	RPM_RX1_ANTA			0xbe0
+#define	RPM_RX2_ANTA			0xbe4
+#define	RPM_RX3_ANTA			0xbe8
+#define	RPM_RX0_ANTB			0xbec
+#define	RPM_RX1_ANTB			0xbf0
+#define	RPM_RX2_ANTB			0xbf4
+#define	RPM_RX3_ANTB			0xbf8
+
+/*Page C*/
+#define	ROFDM0_LSTF			0xc00
+
+#define	ROFDM0_TRXPATHENABLE		0xc04
+#define	ROFDM0_TRMUXPAR			0xc08
+#define	ROFDM0_TRSWISOLATION		0xc0c
+
+#define	ROFDM0_XARXAFE			0xc10
+#define	ROFDM0_XARXIQIMBALANCE		0xc14
+#define	ROFDM0_XBRXAFE			0xc18
+#define	ROFDM0_XBRXIQIMBALANCE		0xc1c
+#define	ROFDM0_XCRXAFE			0xc20
+#define	ROFDM0_XCRXIQIMBANLANCE		0xc24
+#define	ROFDM0_XDRXAFE			0xc28
+#define	ROFDM0_XDRXIQIMBALANCE		0xc2c
+
+#define	ROFDM0_RXDETECTOR1		0xc30
+#define	ROFDM0_RXDETECTOR2		0xc34
+#define	ROFDM0_RXDETECTOR3		0xc38
+#define	ROFDM0_RXDETECTOR4		0xc3c
+
+#define	ROFDM0_RXDSP			0xc40
+#define	ROFDM0_CFOANDDAGC		0xc44
+#define	ROFDM0_CCADROPTHRESHOLD		0xc48
+#define	ROFDM0_ECCATHRESHOLD		0xc4c
+
+#define	ROFDM0_XAAGCCORE1		0xc50
+#define	ROFDM0_XAAGCCORE2		0xc54
+#define	ROFDM0_XBAGCCORE1		0xc58
+#define	ROFDM0_XBAGCCORE2		0xc5c
+#define	ROFDM0_XCAGCCORE1		0xc60
+#define	ROFDM0_XCAGCCORE2		0xc64
+#define	ROFDM0_XDAGCCORE1		0xc68
+#define	ROFDM0_XDAGCCORE2		0xc6c
+
+#define	ROFDM0_AGCPARAMETER1		0xc70
+#define	ROFDM0_AGCPARAMETER2		0xc74
+#define	ROFDM0_AGCRSSITABLE		0xc78
+#define	ROFDM0_HTSTFAGC			0xc7c
+
+#define	ROFDM0_XATXIQIMBALANCE		0xc80
+#define	ROFDM0_XATXAFE			0xc84
+#define	ROFDM0_XBTXIQIMBALANCE		0xc88
+#define	ROFDM0_XBTXAFE			0xc8c
+#define	ROFDM0_XCTXIQIMBALANCE		0xc90
+#define	ROFDM0_XCTXAFE			0xc94
+#define	ROFDM0_XDTXIQIMBALANCE		0xc98
+#define	ROFDM0_XDTXAFE			0xc9c
+
+#define ROFDM0_RXIQEXTANTA		0xca0
+#define	ROFDM0_TXCOEFF1			0xca4
+#define	ROFDM0_TXCOEFF2			0xca8
+#define	ROFDM0_TXCOEFF3			0xcac
+#define	ROFDM0_TXCOEFF4			0xcb0
+#define	ROFDM0_TXCOEFF5			0xcb4
+#define	ROFDM0_TXCOEFF6			0xcb8
+
+#define	ROFDM0_RXHPPARAMETER		0xce0
+#define	ROFDM0_TXPSEUDONOISEWGT		0xce4
+#define	ROFDM0_FRAMESYNC		0xcf0
+#define	ROFDM0_DFSREPORT		0xcf4
+
+
+#define	ROFDM1_LSTF			0xd00
+#define	ROFDM1_TRXPATHENABLE		0xd04
+
+#define	ROFDM1_CF0			0xd08
+#define	ROFDM1_CSI1			0xd10
+#define	ROFDM1_SBD			0xd14
+#define	ROFDM1_CSI2			0xd18
+#define	ROFDM1_CFOTRACKING		0xd2c
+#define	ROFDM1_TRXMESAURE1		0xd34
+#define	ROFDM1_INTFDET			0xd3c
+#define	ROFDM1_PSEUDONOISESTATEAB	0xd50
+#define	ROFDM1_PSEUDONOISESTATECD	0xd54
+#define	ROFDM1_RXPSEUDONOISEWGT		0xd58
+
+#define	ROFDM_PHYCOUNTER1		0xda0
+#define	ROFDM_PHYCOUNTER2		0xda4
+#define	ROFDM_PHYCOUNTER3		0xda8
+
+#define	ROFDM_SHORTCFOAB		0xdac
+#define	ROFDM_SHORTCFOCD		0xdb0
+#define	ROFDM_LONGCFOAB			0xdb4
+#define	ROFDM_LONGCFOCD			0xdb8
+#define	ROFDM_TAILCF0AB			0xdbc
+#define	ROFDM_TAILCF0CD			0xdc0
+#define	ROFDM_PWMEASURE1		0xdc4
+#define	ROFDM_PWMEASURE2		0xdc8
+#define	ROFDM_BWREPORT			0xdcc
+#define	ROFDM_AGCREPORT			0xdd0
+#define	ROFDM_RXSNR			0xdd4
+#define	ROFDM_RXEVMCSI			0xdd8
+#define	ROFDM_SIGREPORT			0xddc
+
+#define	RTXAGC_A_RATE18_06		0xe00
+#define	RTXAGC_A_RATE54_24		0xe04
+#define	RTXAGC_A_CCK1_MCS32		0xe08
+#define	RTXAGC_A_MCS03_MCS00		0xe10
+#define	RTXAGC_A_MCS07_MCS04		0xe14
+#define	RTXAGC_A_MCS11_MCS08		0xe18
+#define	RTXAGC_A_MCS15_MCS12		0xe1c
+
+#define	RTXAGC_B_RATE18_06		0x830
+#define	RTXAGC_B_RATE54_24		0x834
+#define	RTXAGC_B_CCK1_55_MCS32		0x838
+#define	RTXAGC_B_MCS03_MCS00		0x83c
+#define	RTXAGC_B_MCS07_MCS04		0x848
+#define	RTXAGC_B_MCS11_MCS08		0x84c
+#define	RTXAGC_B_MCS15_MCS12		0x868
+#define	RTXAGC_B_CCK11_A_CCK2_11	0x86c
+
+#define	RFPGA0_IQK			0xe28
+#define	RTX_IQK_TONE_A			0xe30
+#define	RRX_IQK_TONE_A			0xe34
+#define	RTX_IQK_PI_A			0xe38
+#define	RRX_IQK_PI_A			0xe3c
+
+#define	RTX_IQK				0xe40
+#define	RRX_IQK				0xe44
+#define	RIQK_AGC_PTS			0xe48
+#define	RIQK_AGC_RSP			0xe4c
+#define	RTX_IQK_TONE_B			0xe50
+#define	RRX_IQK_TONE_B			0xe54
+#define	RTX_IQK_PI_B			0xe58
+#define	RRX_IQK_PI_B			0xe5c
+#define	RIQK_AGC_CONT			0xe60
+
+#define	RBLUE_TOOTH			0xe6c
+#define	RRX_WAIT_CCA			0xe70
+#define	RTX_CCK_RFON			0xe74
+#define	RTX_CCK_BBON			0xe78
+#define	RTX_OFDM_RFON			0xe7c
+#define	RTX_OFDM_BBON			0xe80
+#define	RTX_TO_RX			0xe84
+#define	RTX_TO_TX			0xe88
+#define	RRX_CCK				0xe8c
+
+#define	RTX_POWER_BEFORE_IQK_A		0xe94
+#define	RTX_POWER_AFTER_IQK_A		0xe9c
+
+#define	RRX_POWER_BEFORE_IQK_A		0xea0
+#define	RRX_POWER_BEFORE_IQK_A_2	0xea4
+#define	RRX_POWER_AFTER_IQK_A		0xea8
+#define	RRX_POWER_AFTER_IQK_A_2		0xeac
+
+#define	RTX_POWER_BEFORE_IQK_B		0xeb4
+#define	RTX_POWER_AFTER_IQK_B		0xebc
+
+#define	RRX_POWER_BEFORE_IQK_B		0xec0
+#define	RRX_POWER_BEFORE_IQK_B_2	0xec4
+#define	RRX_POWER_AFTER_IQK_B		0xec8
+#define	RRX_POWER_AFTER_IQK_B_2		0xecc
+
+#define	RRX_OFDM			0xed0
+#define	RRX_WAIT_RIFS			0xed4
+#define	RRX_TO_RX			0xed8
+#define	RSTANDBY			0xedc
+#define	RSLEEP				0xee0
+#define	RPMPD_ANAEN			0xeec
+
+#define	RZEBRA1_HSSIENABLE		0x0
+#define	RZEBRA1_TRXENABLE1		0x1
+#define	RZEBRA1_TRXENABLE2		0x2
+#define	RZEBRA1_AGC			0x4
+#define	RZEBRA1_CHARGEPUMP		0x5
+#define	RZEBRA1_CHANNEL			0x7
+
+#define	RZEBRA1_TXGAIN			0x8
+#define	RZEBRA1_TXLPF			0x9
+#define	RZEBRA1_RXLPF			0xb
+#define	RZEBRA1_RXHPFCORNER		0xc
+
+#define	RGLOBALCTRL			0
+#define	RRTL8256_TXLPF			19
+#define	RRTL8256_RXLPF			11
+#define	RRTL8258_TXLPF			0x11
+#define	RRTL8258_RXLPF			0x13
+#define	RRTL8258_RSSILPF		0xa
+
+#define	RF_AC				0x00
+
+#define	RF_IQADJ_G1			0x01
+#define	RF_IQADJ_G2			0x02
+#define	RF_POW_TRSW			0x05
+
+#define	RF_GAIN_RX			0x06
+#define	RF_GAIN_TX			0x07
+
+#define	RF_TXM_IDAC			0x08
+#define	RF_BS_IQGEN			0x0F
+
+#define	RF_MODE1			0x10
+#define	RF_MODE2			0x11
+
+#define	RF_RX_AGC_HP			0x12
+#define	RF_TX_AGC			0x13
+#define	RF_BIAS				0x14
+#define	RF_IPA				0x15
+#define	RF_POW_ABILITY			0x17
+#define	RF_MODE_AG			0x18
+#define	RRFCHANNEL			0x18
+#define	RF_CHNLBW			0x18
+#define	RF_TOP				0x19
+
+#define	RF_RX_G1			0x1A
+#define	RF_RX_G2			0x1B
+
+#define	RF_RX_BB2			0x1C
+#define	RF_RX_BB1			0x1D
+
+#define	RF_RCK1				0x1E
+#define	RF_RCK2				0x1F
+
+#define	RF_TX_G1			0x20
+#define	RF_TX_G2			0x21
+#define	RF_TX_G3			0x22
+
+#define	RF_TX_BB1			0x23
+#define	RF_T_METER			0x42
+
+#define	RF_SYN_G1			0x25
+#define	RF_SYN_G2			0x26
+#define	RF_SYN_G3			0x27
+#define	RF_SYN_G4			0x28
+#define	RF_SYN_G5			0x29
+#define	RF_SYN_G6			0x2A
+#define	RF_SYN_G7			0x2B
+#define	RF_SYN_G8			0x2C
+
+#define	RF_RCK_OS			0x30
+#define	RF_TXPA_G1			0x31
+#define	RF_TXPA_G2			0x32
+#define	RF_TXPA_G3			0x33
+
+#define	RF_TX_BIAS_A			0x35
+#define	RF_TX_BIAS_D			0x36
+#define	RF_LOBF_9			0x38
+#define	RF_RXRF_A3			0x3C
+#define	RF_TRSW				0x3F
+
+#define	RF_TXRF_A2			0x41
+#define	RF_TXPA_G4			0x46
+#define	RF_TXPA_A4			0x4B
+
+#define	RF_WE_LUT			0xEF
+
+#define	BBBRESETB			0x100
+#define	BGLOBALRESETB			0x200
+#define	BOFDMTXSTART			0x4
+#define	BCCKTXSTART			0x8
+#define	BCRC32DEBUG			0x100
+#define	BPMACLOOPBACK			0x10
+#define	BTXLSIG				0xffffff
+#define	BOFDMTXRATE			0xf
+#define	BOFDMTXRESERVED			0x10
+#define	BOFDMTXLENGTH			0x1ffe0
+#define	BOFDMTXPARITY			0x20000
+#define	BTXHTSIG1			0xffffff
+#define	BTXHTMCSRATE			0x7f
+#define	BTXHTBW				0x80
+#define	BTXHTLENGTH			0xffff00
+#define	BTXHTSIG2			0xffffff
+#define	BTXHTSMOOTHING			0x1
+#define	BTXHTSOUNDING			0x2
+#define	BTXHTRESERVED			0x4
+#define	BTXHTAGGREATION			0x8
+#define	BTXHTSTBC			0x30
+#define	BTXHTADVANCECODING		0x40
+#define	BTXHTSHORTGI			0x80
+#define	BTXHTNUMBERHT_LTF		0x300
+#define	BTXHTCRC8			0x3fc00
+#define	BCOUNTERRESET			0x10000
+#define	BNUMOFOFDMTX			0xffff
+#define	BNUMOFCCKTX			0xffff0000
+#define	BTXIDLEINTERVAL			0xffff
+#define	BOFDMSERVICE			0xffff0000
+#define	BTXMACHEADER			0xffffffff
+#define	BTXDATAINIT			0xff
+#define	BTXHTMODE			0x100
+#define	BTXDATATYPE			0x30000
+#define	BTXRANDOMSEED			0xffffffff
+#define	BCCKTXPREAMBLE			0x1
+#define	BCCKTXSFD			0xffff0000
+#define	BCCKTXSIG			0xff
+#define	BCCKTXSERVICE			0xff00
+#define	BCCKLENGTHEXT			0x8000
+#define	BCCKTXLENGHT			0xffff0000
+#define	BCCKTXCRC16			0xffff
+#define	BCCKTXSTATUS			0x1
+#define	BOFDMTXSTATUS			0x2
+#define IS_BB_REG_OFFSET_92S(_offset)	\
+	((_offset >= 0x800) && (_offset <= 0xfff))
+
+#define	BRFMOD				0x1
+#define	BJAPANMODE			0x2
+#define	BCCKTXSC			0x30
+#define	BCCKEN				0x1000000
+#define	BOFDMEN				0x2000000
+
+#define	BOFDMRXADCPHASE			0x10000
+#define	BOFDMTXDACPHASE			0x40000
+#define	BXATXAGC			0x3f
+
+#define	BXBTXAGC			0xf00
+#define	BXCTXAGC			0xf000
+#define	BXDTXAGC			0xf0000
+
+#define	BPASTART			0xf0000000
+#define	BTRSTART			0x00f00000
+#define	BRFSTART			0x0000f000
+#define	BBBSTART			0x000000f0
+#define	BBBCCKSTART			0x0000000f
+#define	BPAEND				0xf
+#define	BTREND				0x0f000000
+#define	BRFEND				0x000f0000
+#define	BCCAMASK			0x000000f0
+#define	BR2RCCAMASK			0x00000f00
+#define	BHSSI_R2TDELAY			0xf8000000
+#define	BHSSI_T2RDELAY			0xf80000
+#define	BCONTXHSSI			0x400
+#define	BIGFROMCCK			0x200
+#define	BAGCADDRESS			0x3f
+#define	BRXHPTX				0x7000
+#define	BRXHP2RX			0x38000
+#define	BRXHPCCKINI			0xc0000
+#define	BAGCTXCODE			0xc00000
+#define	BAGCRXCODE			0x300000
+
+#define	B3WIREDATALENGTH		0x800
+#define	B3WIREADDREAALENGTH		0x400
+
+#define	B3WIRERFPOWERDOWN		0x1
+#define	B5GPAPEPOLARITY			0x40000000
+#define	B2GPAPEPOLARITY			0x80000000
+#define	BRFSW_TXDEFAULTANT		0x3
+#define	BRFSW_TXOPTIONANT		0x30
+#define	BRFSW_RXDEFAULTANT		0x300
+#define	BRFSW_RXOPTIONANT		0x3000
+#define	BRFSI_3WIREDATA			0x1
+#define	BRFSI_3WIRECLOCK		0x2
+#define	BRFSI_3WIRELOAD			0x4
+#define	BRFSI_3WIRERW			0x8
+#define	BRFSI_3WIRE			0xf
+
+#define	BRFSI_RFENV			0x10
+
+#define	BRFSI_TRSW			0x20
+#define	BRFSI_TRSWB			0x40
+#define	BRFSI_ANTSW			0x100
+#define	BRFSI_ANTSWB			0x200
+#define	BRFSI_PAPE			0x400
+#define	BRFSI_PAPE5G			0x800
+#define	BBANDSELECT			0x1
+#define	BHTSIG2_GI			0x80
+#define	BHTSIG2_SMOOTHING		0x01
+#define	BHTSIG2_SOUNDING		0x02
+#define	BHTSIG2_AGGREATON		0x08
+#define	BHTSIG2_STBC			0x30
+#define	BHTSIG2_ADVCODING		0x40
+#define	BHTSIG2_NUMOFHTLTF		0x300
+#define	BHTSIG2_CRC8			0x3fc
+#define	BHTSIG1_MCS			0x7f
+#define	BHTSIG1_BANDWIDTH		0x80
+#define	BHTSIG1_HTLENGTH		0xffff
+#define	BLSIG_RATE			0xf
+#define	BLSIG_RESERVED			0x10
+#define	BLSIG_LENGTH			0x1fffe
+#define	BLSIG_PARITY			0x20
+#define	BCCKRXPHASE			0x4
+
+#define	BLSSIREADADDRESS		0x7f800000
+#define	BLSSIREADEDGE			0x80000000
+
+#define	BLSSIREADBACKDATA		0xfffff
+
+#define	BLSSIREADOKFLAG			0x1000
+#define	BCCKSAMPLERATE			0x8
+#define	BREGULATOR0STANDBY		0x1
+#define	BREGULATORPLLSTANDBY		0x2
+#define	BREGULATOR1STANDBY		0x4
+#define	BPLLPOWERUP			0x8
+#define	BDPLLPOWERUP			0x10
+#define	BDA10POWERUP			0x20
+#define	BAD7POWERUP			0x200
+#define	BDA6POWERUP			0x2000
+#define	BXTALPOWERUP			0x4000
+#define	B40MDCLKPOWERUP			0x8000
+#define	BDA6DEBUGMODE			0x20000
+#define	BDA6SWING			0x380000
+
+#define	BADCLKPHASE			0x4000000
+#define	B80MCLKDELAY	0x18000000
+#define	BAFEWATCHDOGENABLE	0x20000000
+
+#define	BXTALCAP01	0xc0000000
+#define	BXTALCAP23	0x3
+#define	BXTALCAP92X			0x0f000000
+#define BXTALCAP	0x0f000000
+
+#define	BINTDIFCLKENABLE		0x400
+#define	BEXTSIGCLKENABLE		0x800
+#define	BBANDGAP_MBIAS_POWERUP		0x10000
+#define	BAD11SH_GAIN			0xc0000
+#define	BAD11NPUT_RANGE			0x700000
+#define	BAD110P_CURRENT			0x3800000
+#define	BLPATH_LOOPBACK			0x4000000
+#define	BQPATH_LOOPBACK			0x8000000
+#define	BAFE_LOOPBACK			0x10000000
+#define	BDA10_SWING			0x7e0
+#define	BDA10_REVERSE			0x800
+#define	BDA_CLK_SOURCE			0x1000
+#define	BDA7INPUT_RANGE			0x6000
+#define	BDA7_GAIN			0x38000
+#define	BDA7OUTPUT_CM_MODE		0x40000
+#define	BDA7INPUT_CM_MODE		0x380000
+#define	BDA7CURRENT			0xc00000
+#define	BREGULATOR_ADJUST		0x7000000
+#define	BAD11POWERUP_ATTX		0x1
+#define	BDA10PS_ATTX			0x10
+#define	BAD11POWERUP_ATRX		0x100
+#define	BDA10PS_ATRX			0x1000
+#define	BCCKRX_AGC_FORMAT		0x200
+#define	BPSDFFT_SAMPLE_POINT		0xc000
+#define	BPSD_AVERAGE_NUM		0x3000
+#define	BIQPATH_CONTROL	0xc00
+#define	BPSD_FREQ			0x3ff
+#define	BPSD_ANTENNA_PATH		0x30
+#define	BPSD_IQ_SWITCH			0x40
+#define	BPSD_RX_TRIGGER			0x400000
+#define	BPSD_TX_TRIGGER			0x80000000
+#define	BPSD_SINE_TONE_SCALE		0x7f000000
+#define	BPSD_REPORT			0xffff
+
+#define	BOFDM_TXSC			0x30000000
+#define	BCCK_TXON			0x1
+#define	BOFDM_TXON			0x2
+#define	BDEBUG_PAGE			0xfff
+#define	BDEBUG_ITEM			0xff
+#define	BANTL				0x10
+#define	BANT_NONHT			0x100
+#define	BANT_HT1			0x1000
+#define	BANT_HT2			0x10000
+#define	BANT_HT1S1			0x100000
+#define	BANT_NONHTS1			0x1000000
+
+#define	BCCK_BBMODE			0x3
+#define	BCCK_TXPOWERSAVING		0x80
+#define	BCCK_RXPOWERSAVING		0x40
+
+#define	BCCK_SIDEBAND			0x10
+
+#define	BCCK_SCRAMBLE			0x8
+#define	BCCK_ANTDIVERSITY		0x8000
+#define	BCCK_CARRIER_RECOVERY		0x4000
+#define	BCCK_TXRATE			0x3000
+#define	BCCK_DCCANCEL			0x0800
+#define	BCCK_ISICANCEL			0x0400
+#define	BCCK_MATCH_FILTER		0x0200
+#define	BCCK_EQUALIZER			0x0100
+#define	BCCK_PREAMBLE_DETECT		0x800000
+#define	BCCK_FAST_FALSECCA		0x400000
+#define	BCCK_CH_ESTSTART		0x300000
+#define	BCCK_CCA_COUNT			0x080000
+#define	BCCK_CS_LIM			0x070000
+#define	BCCK_BIST_MODE			0x80000000
+#define	BCCK_CCAMASK			0x40000000
+#define	BCCK_TX_DAC_PHASE		0x4
+#define	BCCK_RX_ADC_PHASE		0x20000000
+#define	BCCKR_CP_MODE			0x0100
+#define	BCCK_TXDC_OFFSET		0xf0
+#define	BCCK_RXDC_OFFSET		0xf
+#define	BCCK_CCA_MODE			0xc000
+#define	BCCK_FALSECS_LIM		0x3f00
+#define	BCCK_CS_RATIO			0xc00000
+#define	BCCK_CORGBIT_SEL		0x300000
+#define	BCCK_PD_LIM			0x0f0000
+#define	BCCK_NEWCCA			0x80000000
+#define	BCCK_RXHP_OF_IG			0x8000
+#define	BCCK_RXIG			0x7f00
+#define	BCCK_LNA_POLARITY		0x800000
+#define	BCCK_RX1ST_BAIN			0x7f0000
+#define	BCCK_RF_EXTEND			0x20000000
+#define	BCCK_RXAGC_SATLEVEL		0x1f000000
+#define	BCCK_RXAGC_SATCOUNT		0xe0
+#define	BCCKRXRFSETTLE			0x1f
+#define	BCCK_FIXED_RXAGC		0x8000
+#define	BCCK_ANTENNA_POLARITY		0x2000
+#define	BCCK_TXFILTER_TYPE		0x0c00
+#define	BCCK_RXAGC_REPORTTYPE		0x0300
+#define	BCCK_RXDAGC_EN			0x80000000
+#define	BCCK_RXDAGC_PERIOD		0x20000000
+#define	BCCK_RXDAGC_SATLEVEL		0x1f000000
+#define	BCCK_TIMING_RECOVERY		0x800000
+#define	BCCK_TXC0			0x3f0000
+#define	BCCK_TXC1			0x3f000000
+#define	BCCK_TXC2			0x3f
+#define	BCCK_TXC3			0x3f00
+#define	BCCK_TXC4			0x3f0000
+#define	BCCK_TXC5			0x3f000000
+#define	BCCK_TXC6			0x3f
+#define	BCCK_TXC7			0x3f00
+#define	BCCK_DEBUGPORT			0xff0000
+#define	BCCK_DAC_DEBUG			0x0f000000
+#define	BCCK_FALSEALARM_ENABLE		0x8000
+#define	BCCK_FALSEALARM_READ		0x4000
+#define	BCCK_TRSSI			0x7f
+#define	BCCK_RXAGC_REPORT		0xfe
+#define	BCCK_RXREPORT_ANTSEL		0x80000000
+#define	BCCK_RXREPORT_MFOFF		0x40000000
+#define	BCCK_RXREPORT_SQLOSS		0x20000000
+#define	BCCK_RXREPORT_PKTLOSS		0x10000000
+#define	BCCK_RXREPORT_LOCKEDBIT		0x08000000
+#define	BCCK_RXREPORT_RATEERROR		0x04000000
+#define	BCCK_RXREPORT_RXRATE		0x03000000
+#define	BCCK_RXFA_COUNTER_LOWER		0xff
+#define	BCCK_RXFA_COUNTER_UPPER		0xff000000
+#define	BCCK_RXHPAGC_START		0xe000
+#define	BCCK_RXHPAGC_FINAL		0x1c00
+#define	BCCK_RXFALSEALARM_ENABLE	0x8000
+#define	BCCK_FACOUNTER_FREEZE		0x4000
+#define	BCCK_TXPATH_SEL			0x10000000
+#define	BCCK_DEFAULT_RXPATH		0xc000000
+#define	BCCK_OPTION_RXPATH		0x3000000
+
+#define	BNUM_OFSTF	0x3
+#define	BSHIFT_L	0xc0
+#define	BGI_TH	0xc
+#define	BRXPATH_A	0x1
+#define	BRXPATH_B	0x2
+#define	BRXPATH_C	0x4
+#define	BRXPATH_D	0x8
+#define	BTXPATH_A	0x1
+#define	BTXPATH_B	0x2
+#define	BTXPATH_C	0x4
+#define	BTXPATH_D	0x8
+#define	BTRSSI_FREQ	0x200
+#define	BADC_BACKOFF	0x3000
+#define	BDFIR_BACKOFF	0xc000
+#define	BTRSSI_LATCH_PHASE	0x10000
+#define	BRX_LDC_OFFSET	0xff
+#define	BRX_QDC_OFFSET	0xff00
+#define	BRX_DFIR_MODE	0x1800000
+#define	BRX_DCNF_TYPE	0xe000000
+#define	BRXIQIMB_A	0x3ff
+#define	BRXIQIMB_B	0xfc00
+#define	BRXIQIMB_C	0x3f0000
+#define	BRXIQIMB_D	0xffc00000
+#define	BDC_DC_NOTCH	0x60000
+#define	BRXNB_NOTCH	0x1f000000
+#define	BPD_TH	0xf
+#define	BPD_TH_OPT2	0xc000
+#define	BPWED_TH	0x700
+#define	BIFMF_WIN_L	0x800
+#define	BPD_OPTION	0x1000
+#define	BMF_WIN_L	0xe000
+#define	BBW_SEARCH_L	0x30000
+#define	BWIN_ENH_L	0xc0000
+#define	BBW_TH	0x700000
+#define	BED_TH2	0x3800000
+#define	BBW_OPTION	0x4000000
+#define	BRADIO_TH	0x18000000
+#define	BWINDOW_L	0xe0000000
+#define	BSBD_OPTION	0x1
+#define	BFRAME_TH	0x1c
+#define	BFS_OPTION	0x60
+#define	BDC_SLOPE_CHECK	0x80
+#define	BFGUARD_COUNTER_DC_L	0xe00
+#define	BFRAME_WEIGHT_SHORT	0x7000
+#define	BSUB_TUNE	0xe00000
+#define	BFRAME_DC_LENGTH	0xe000000
+#define	BSBD_START_OFFSET	0x30000000
+#define	BFRAME_TH_2	0x7
+#define	BFRAME_GI2_TH	0x38
+#define	BGI2_SYNC_EN	0x40
+#define	BSARCH_SHORT_EARLY	0x300
+#define	BSARCH_SHORT_LATE	0xc00
+#define	BSARCH_GI2_LATE	0x70000
+#define	BCFOANTSUM	0x1
+#define	BCFOACC	0x2
+#define	BCFOSTARTOFFSET	0xc
+#define	BCFOLOOPBACK	0x70
+#define	BCFOSUMWEIGHT	0x80
+#define	BDAGCENABLE	0x10000
+#define	BTXIQIMB_A	0x3ff
+#define	BTXIQIMB_b	0xfc00
+#define	BTXIQIMB_C	0x3f0000
+#define	BTXIQIMB_D	0xffc00000
+#define	BTXIDCOFFSET	0xff
+#define	BTXIQDCOFFSET	0xff00
+#define	BTXDFIRMODE	0x10000
+#define	BTXPESUDO_NOISEON	0x4000000
+#define	BTXPESUDO_NOISE_A	0xff
+#define	BTXPESUDO_NOISE_B	0xff00
+#define	BTXPESUDO_NOISE_C	0xff0000
+#define	BTXPESUDO_NOISE_D	0xff000000
+#define	BCCA_DROPOPTION	0x20000
+#define	BCCA_DROPTHRES	0xfff00000
+#define	BEDCCA_H	0xf
+#define	BEDCCA_L	0xf0
+#define	BLAMBDA_ED	0x300
+#define	BRX_INITIALGAIN	0x7f
+#define	BRX_ANTDIV_EN	0x80
+#define	BRX_AGC_ADDRESS_FOR_LNA		0x7f00
+#define	BRX_HIGHPOWER_FLOW	0x8000
+#define	BRX_AGC_FREEZE_THRES		0xc0000
+#define	BRX_FREEZESTEP_AGC1	0x300000
+#define	BRX_FREEZESTEP_AGC2	0xc00000
+#define	BRX_FREEZESTEP_AGC3	0x3000000
+#define	BRX_FREEZESTEP_AGC0	0xc000000
+#define	BRXRSSI_CMP_EN	0x10000000
+#define	BRXQUICK_AGCEN	0x20000000
+#define	BRXAGC_FREEZE_THRES_MODE	0x40000000
+#define	BRX_OVERFLOW_CHECKTYPE	0x80000000
+#define	BRX_AGCSHIFT	0x7f
+#define	BTRSW_TRI_ONLY	0x80
+#define	BPOWER_THRES	0x300
+#define	BRXAGC_EN	0x1
+#define	BRXAGC_TOGETHER_EN	0x2
+#define	BRXAGC_MIN	0x4
+#define	BRXHP_INI	0x7
+#define	BRXHP_TRLNA	0x70
+#define	BRXHP_RSSI	0x700
+#define	BRXHP_BBP1	0x7000
+#define	BRXHP_BBP2	0x70000
+#define	BRXHP_BBP3	0x700000
+#define	BRSSI_H	0x7f0000
+#define	BRSSI_GEN	0x7f000000
+#define	BRXSETTLE_TRSW	0x7
+#define	BRXSETTLE_LNA	0x38
+#define	BRXSETTLE_RSSI	0x1c0
+#define	BRXSETTLE_BBP	0xe00
+#define	BRXSETTLE_RXHP	0x7000
+#define	BRXSETTLE_ANTSW_RSSI	0x38000
+#define	BRXSETTLE_ANTSW	0xc0000
+#define	BRXPROCESS_TIME_DAGC	0x300000
+#define	BRXSETTLE_HSSI	0x400000
+#define	BRXPROCESS_TIME_BBPPW	0x800000
+#define	BRXANTENNA_POWER_SHIFT	0x3000000
+#define	BRSSI_TABLE_SELECT	0xc000000
+#define	BRXHP_FINAL	0x7000000
+#define	BRXHPSETTLE_BBP	0x7
+#define	BRXHTSETTLE_HSSI	0x8
+#define	BRXHTSETTLE_RXHP	0x70
+#define	BRXHTSETTLE_BBPPW	0x80
+#define	BRXHTSETTLE_IDLE	0x300
+#define	BRXHTSETTLE_RESERVED	0x1c00
+#define	BRXHT_RXHP_EN	0x8000
+#define	BRXAGC_FREEZE_THRES	0x30000
+#define	BRXAGC_TOGETHEREN	0x40000
+#define	BRXHTAGC_MIN	0x80000
+#define	BRXHTAGC_EN	0x100000
+#define	BRXHTDAGC_EN	0x200000
+#define	BRXHT_RXHP_BBP	0x1c00000
+#define	BRXHT_RXHP_FINAL	0xe0000000
+#define	BRXPW_RADIO_TH	0x3
+#define	BRXPW_RADIO_EN	0x4
+#define	BRXMF_HOLD	0x3800
+#define	BRXPD_DELAY_TH1	0x38
+#define	BRXPD_DELAY_TH2	0x1c0
+#define	BRXPD_DC_COUNT_MAX	0x600
+#define	BRXPD_DELAY_TH	0x8000
+#define	BRXPROCESS_DELAY	0xf0000
+#define	BRXSEARCHRANGE_GI2_EARLY	0x700000
+#define	BRXFRAME_FUARD_COUNTER_L	0x3800000
+#define	BRXSGI_GUARD_L	0xc000000
+#define	BRXSGI_SEARCH_L	0x30000000
+#define	BRXSGI_TH	0xc0000000
+#define	BDFSCNT0	0xff
+#define	BDFSCNT1	0xff00
+#define	BDFSFLAG	0xf0000
+#define	BMF_WEIGHT_SUM	0x300000
+#define	BMINIDX_TH	0x7f000000
+#define	BDAFORMAT	0x40000
+#define	BTXCH_EMU_ENABLE	0x01000000
+#define	BTRSW_ISOLATION_A	0x7f
+#define	BTRSW_ISOLATION_B	0x7f00
+#define	BTRSW_ISOLATION_C	0x7f0000
+#define	BTRSW_ISOLATION_D	0x7f000000
+#define	BEXT_LNA_GAIN	0x7c00
+
+#define	BSTBC_EN	0x4
+#define	BANTENNA_MAPPING	0x10
+#define	BNSS	0x20
+#define	BCFO_ANTSUM_ID			0x200
+#define	BPHY_COUNTER_RESET	0x8000000
+#define	BCFO_REPORT_GET	0x4000000
+#define	BOFDM_CONTINUE_TX	0x10000000
+#define	BOFDM_SINGLE_CARRIER	0x20000000
+#define	BOFDM_SINGLE_TONE	0x40000000
+#define	BHT_DETECT	0x100
+#define	BCFOEN	0x10000
+#define	BCFOVALUE	0xfff00000
+#define	BSIGTONE_RE	0x3f
+#define	BSIGTONE_IM	0x7f00
+#define	BCOUNTER_CCA	0xffff
+#define	BCOUNTER_PARITYFAIL	0xffff0000
+#define	BCOUNTER_RATEILLEGAL	0xffff
+#define	BCOUNTER_CRC8FAIL	0xffff0000
+#define	BCOUNTER_MCSNOSUPPORT	0xffff
+#define	BCOUNTER_FASTSYNC	0xffff
+#define	BSHORTCFO	0xfff
+#define	BSHORTCFOT_LENGTH	12
+#define	BSHORTCFOF_LENGTH	11
+#define	BLONGCFO	0x7ff
+#define	BLONGCFOT_LENGTH	11
+#define	BLONGCFOF_LENGTH	11
+#define	BTAILCFO	0x1fff
+#define	BTAILCFOT_LENGTH	13
+#define	BTAILCFOF_LENGTH	12
+#define	BNOISE_EN_PWDB	0xffff
+#define	BCC_POWER_DB	0xffff0000
+#define	BMOISE_PWDB	0xffff
+#define	BPOWERMEAST_LENGTH	10
+#define	BPOWERMEASF_LENGTH	3
+#define	BRX_HT_BW	0x1
+#define	BRXSC	0x6
+#define	BRX_HT	0x8
+#define	BNB_INTF_DET_ON	0x1
+#define	BINTF_WIN_LEN_CFG	0x30
+#define	BNB_INTF_TH_CFG	0x1c0
+#define	BRFGAIN	0x3f
+#define	BTABLESEL	0x40
+#define	BTRSW	0x80
+#define	BRXSNR_A	0xff
+#define	BRXSNR_B	0xff00
+#define	BRXSNR_C	0xff0000
+#define	BRXSNR_D	0xff000000
+#define	BSNR_EVMT_LENGTH	8
+#define	BSNR_EVMF_LENGTH	1
+#define	BCSI1ST	0xff
+#define	BCSI2ND	0xff00
+#define	BRXEVM1ST	0xff0000
+#define	BRXEVM2ND	0xff000000
+#define	BSIGEVM	0xff
+#define	BPWDB	0xff00
+#define	BSGIEN	0x10000
+
+#define	BSFACTOR_QMA1	0xf
+#define	BSFACTOR_QMA2	0xf0
+#define	BSFACTOR_QMA3	0xf00
+#define	BSFACTOR_QMA4	0xf000
+#define	BSFACTOR_QMA5	0xf0000
+#define	BSFACTOR_QMA6	0xf0000
+#define	BSFACTOR_QMA7	0xf00000
+#define	BSFACTOR_QMA8	0xf000000
+#define	BSFACTOR_QMA9	0xf0000000
+#define	BCSI_SCHEME	0x100000
+
+#define	BNOISE_LVL_TOP_SET		0x3
+#define	BCHSMOOTH	0x4
+#define	BCHSMOOTH_CFG1	0x38
+#define	BCHSMOOTH_CFG2	0x1c0
+#define	BCHSMOOTH_CFG3	0xe00
+#define	BCHSMOOTH_CFG4	0x7000
+#define	BMRCMODE	0x800000
+#define	BTHEVMCFG	0x7000000
+
+#define	BLOOP_FIT_TYPE	0x1
+#define	BUPD_CFO	0x40
+#define	BUPD_CFO_OFFDATA	0x80
+#define	BADV_UPD_CFO	0x100
+#define	BADV_TIME_CTRL	0x800
+#define	BUPD_CLKO	0x1000
+#define	BFC	0x6000
+#define	BTRACKING_MODE	0x8000
+#define	BPHCMP_ENABLE	0x10000
+#define	BUPD_CLKO_LTF	0x20000
+#define	BCOM_CH_CFO	0x40000
+#define	BCSI_ESTI_MODE	0x80000
+#define	BADV_UPD_EQZ	0x100000
+#define	BUCHCFG	0x7000000
+#define	BUPDEQZ	0x8000000
+
+#define	BRX_PESUDO_NOISE_ON		0x20000000
+#define	BRX_PESUDO_NOISE_A	0xff
+#define	BRX_PESUDO_NOISE_B	0xff00
+#define	BRX_PESUDO_NOISE_C	0xff0000
+#define	BRX_PESUDO_NOISE_D	0xff000000
+#define	BRX_PESUDO_NOISESTATE_A		0xffff
+#define	BRX_PESUDO_NOISESTATE_B		0xffff0000
+#define	BRX_PESUDO_NOISESTATE_C		0xffff
+#define	BRX_PESUDO_NOISESTATE_D		0xffff0000
+
+#define	BZEBRA1_HSSIENABLE	0x8
+#define	BZEBRA1_TRXCONTROL	0xc00
+#define	BZEBRA1_TRXGAINSETTING	0x07f
+#define	BZEBRA1_RXCOUNTER	0xc00
+#define	BZEBRA1_TXCHANGEPUMP	0x38
+#define	BZEBRA1_RXCHANGEPUMP	0x7
+#define	BZEBRA1_CHANNEL_NUM	0xf80
+#define	BZEBRA1_TXLPFBW	0x400
+#define	BZEBRA1_RXLPFBW	0x600
+
+#define	BRTL8256REG_MODE_CTRL1		0x100
+#define	BRTL8256REG_MODE_CTRL0		0x40
+#define	BRTL8256REG_TXLPFBW		0x18
+#define	BRTL8256REG_RXLPFBW		0x600
+
+#define	BRTL8258_TXLPFBW	0xc
+#define	BRTL8258_RXLPFBW	0xc00
+#define	BRTL8258_RSSILPFBW	0xc0
+
+#define	BBYTE0	0x1
+#define	BBYTE1	0x2
+#define	BBYTE2	0x4
+#define	BBYTE3	0x8
+#define	BWORD0	0x3
+#define	BWORD1	0xc
+#define	BWORD	0xf
+
+#define	MASKBYTE0	0xff
+#define	MASKBYTE1	0xff00
+#define	MASKBYTE2	0xff0000
+#define	MASKBYTE3	0xff000000
+#define	MASKHWORD	0xffff0000
+#define	MASKLWORD	0x0000ffff
+#define	MASKDWORD			0xffffffff
+#define	MASK12BITS			0xfff
+#define	MASKH4BITS			0xf0000000
+#define MASKOFDM_D			0xffc00000
+#define	MASKCCK				0x3f3f3f3f
+
+#define	MASK4BITS		0x0f
+#define	MASK20BITS		0xfffff
+#define RFREG_OFFSET_MASK		0xfffff
+
+#define	BENABLE	0x1
+#define	BDISABLE	0x0
+
+#define	LEFT_ANTENNA	0x0
+#define	RIGHT_ANTENNA	0x1
+
+#define	TCHECK_TXSTATUS	500
+#define	TUPDATE_RXCOUNTER	100
+
+#define	REG_UN_used_register		0x01bf
+
+/* WOL bit information */
+#define	HAL92C_WOL_PTK_UPDATE_EVENT	BIT(0)
+#define	HAL92C_WOL_GTK_UPDATE_EVENT	BIT(1)
+#define	HAL92C_WOL_DISASSOC_EVENT	BIT(2)
+#define	HAL92C_WOL_DEAUTH_EVENT		BIT(3)
+#define	HAL92C_WOL_FW_DISCONNECT_EVENT	BIT(4)
+
+#define		WOL_REASON_PTK_UPDATE		BIT(0)
+#define		WOL_REASON_GTK_UPDATE		BIT(1)
+#define		WOL_REASON_DISASSOC		BIT(2)
+#define		WOL_REASON_DEAUTH		BIT(3)
+#define		WOL_REASON_FW_DISCONNECT	BIT(4)
+
+/* 2 EFUSE_TEST (For RTL8723 partially) */
+#define EFUSE_SEL(x)				(((x) & 0x3) << 8)
+#define EFUSE_SEL_MASK				0x300
+#define EFUSE_WIFI_SEL_0			0x0
+
+#define	WL_HWPDN_EN	BIT(0)	/* Enable GPIO[9] as WiFi HW PDn source*/
+#define	WL_HWPDN_SL	BIT(1)	/* WiFi HW PDn polarity control*/
+
+#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/rf.c b/drivers/net/wireless/rtlwifi/rtl8723be/rf.c
new file mode 100644
index 000000000000..486294930a7b
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/rf.c
@@ -0,0 +1,504 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2014  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "reg.h"
+#include "def.h"
+#include "phy.h"
+#include "rf.h"
+#include "dm.h"
+
+static bool _rtl8723be_phy_rf6052_config_parafile(struct ieee80211_hw *hw);
+
+void rtl8723be_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, u8 bandwidth)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+	switch (bandwidth) {
+	case HT_CHANNEL_WIDTH_20:
+		rtlphy->rfreg_chnlval[0] = ((rtlphy->rfreg_chnlval[0] &
+					     0xfffff3ff) | BIT(10) | BIT(11));
+		rtl_set_rfreg(hw, RF90_PATH_A, RF_CHNLBW, RFREG_OFFSET_MASK,
+			      rtlphy->rfreg_chnlval[0]);
+		break;
+	case HT_CHANNEL_WIDTH_20_40:
+		rtlphy->rfreg_chnlval[0] = ((rtlphy->rfreg_chnlval[0] &
+					     0xfffff3ff) | BIT(10));
+		rtl_set_rfreg(hw, RF90_PATH_A, RF_CHNLBW, RFREG_OFFSET_MASK,
+			      rtlphy->rfreg_chnlval[0]);
+		break;
+	default:
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
+			 "unknown bandwidth: %#X\n", bandwidth);
+		break;
+	}
+}
+
+void rtl8723be_phy_rf6052_set_cck_txpower(struct ieee80211_hw *hw,
+					  u8 *ppowerlevel)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	u32 tx_agc[2] = {0, 0}, tmpval;
+	bool turbo_scanoff = false;
+	u8 idx1, idx2;
+	u8 *ptr;
+	u8 direction;
+	u32 pwrtrac_value;
+
+	if (rtlefuse->eeprom_regulatory != 0)
+		turbo_scanoff = true;
+
+	if (mac->act_scanning) {
+		tx_agc[RF90_PATH_A] = 0x3f3f3f3f;
+		tx_agc[RF90_PATH_B] = 0x3f3f3f3f;
+
+		if (turbo_scanoff) {
+			for (idx1 = RF90_PATH_A; idx1 <= RF90_PATH_B; idx1++) {
+				tx_agc[idx1] = ppowerlevel[idx1] |
+					       (ppowerlevel[idx1] << 8) |
+					       (ppowerlevel[idx1] << 16) |
+					       (ppowerlevel[idx1] << 24);
+			}
+		}
+	} else {
+		for (idx1 = RF90_PATH_A; idx1 <= RF90_PATH_B; idx1++) {
+			tx_agc[idx1] = ppowerlevel[idx1] |
+				       (ppowerlevel[idx1] << 8) |
+				       (ppowerlevel[idx1] << 16) |
+				       (ppowerlevel[idx1] << 24);
+		}
+		if (rtlefuse->eeprom_regulatory == 0) {
+			tmpval =
+			    (rtlphy->mcs_offset[0][6]) +
+			    (rtlphy->mcs_offset[0][7] << 8);
+			tx_agc[RF90_PATH_A] += tmpval;
+
+			tmpval = (rtlphy->mcs_offset[0][14]) +
+				 (rtlphy->mcs_offset[0][15] <<
+				  24);
+			tx_agc[RF90_PATH_B] += tmpval;
+		}
+	}
+	for (idx1 = RF90_PATH_A; idx1 <= RF90_PATH_B; idx1++) {
+		ptr = (u8 *)(&(tx_agc[idx1]));
+		for (idx2 = 0; idx2 < 4; idx2++) {
+			if (*ptr > RF6052_MAX_TX_PWR)
+				*ptr = RF6052_MAX_TX_PWR;
+			ptr++;
+		}
+	}
+	rtl8723be_dm_txpower_track_adjust(hw, 1, &direction, &pwrtrac_value);
+	if (direction == 1) {
+		tx_agc[0] += pwrtrac_value;
+		tx_agc[1] += pwrtrac_value;
+	} else if (direction == 2) {
+		tx_agc[0] -= pwrtrac_value;
+		tx_agc[1] -= pwrtrac_value;
+	}
+	tmpval = tx_agc[RF90_PATH_A] & 0xff;
+	rtl_set_bbreg(hw, RTXAGC_A_CCK1_MCS32, MASKBYTE1, tmpval);
+
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+		 "CCK PWR 1M (rf-A) = 0x%x (reg 0x%x)\n", tmpval,
+		 RTXAGC_A_CCK1_MCS32);
+
+	tmpval = tx_agc[RF90_PATH_A] >> 8;
+
+	rtl_set_bbreg(hw, RTXAGC_B_CCK11_A_CCK2_11, 0xffffff00, tmpval);
+
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+		 "CCK PWR 2~11M (rf-A) = 0x%x (reg 0x%x)\n", tmpval,
+		 RTXAGC_B_CCK11_A_CCK2_11);
+
+	tmpval = tx_agc[RF90_PATH_B] >> 24;
+	rtl_set_bbreg(hw, RTXAGC_B_CCK11_A_CCK2_11, MASKBYTE0, tmpval);
+
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+		 "CCK PWR 11M (rf-B) = 0x%x (reg 0x%x)\n", tmpval,
+		 RTXAGC_B_CCK11_A_CCK2_11);
+
+	tmpval = tx_agc[RF90_PATH_B] & 0x00ffffff;
+	rtl_set_bbreg(hw, RTXAGC_B_CCK1_55_MCS32, 0xffffff00, tmpval);
+
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+		 "CCK PWR 1~5.5M (rf-B) = 0x%x (reg 0x%x)\n", tmpval,
+		 RTXAGC_B_CCK1_55_MCS32);
+}
+
+static void rtl8723be_phy_get_power_base(struct ieee80211_hw *hw,
+					 u8 *ppowerlevel_ofdm,
+					 u8 *ppowerlevel_bw20,
+					 u8 *ppowerlevel_bw40,
+					 u8 channel, u32 *ofdmbase,
+					 u32 *mcsbase)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	u32 powerbase0, powerbase1;
+	u8 i, powerlevel[2];
+
+	for (i = 0; i < 2; i++) {
+		powerbase0 = ppowerlevel_ofdm[i];
+
+		powerbase0 = (powerbase0 << 24) | (powerbase0 << 16) |
+		    (powerbase0 << 8) | powerbase0;
+		*(ofdmbase + i) = powerbase0;
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+			 " [OFDM power base index rf(%c) = 0x%x]\n",
+			 ((i == 0) ? 'A' : 'B'), *(ofdmbase + i));
+	}
+
+	for (i = 0; i < 2; i++) {
+		if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20)
+			powerlevel[i] = ppowerlevel_bw20[i];
+		else
+			powerlevel[i] = ppowerlevel_bw40[i];
+		powerbase1 = powerlevel[i];
+		powerbase1 = (powerbase1 << 24) | (powerbase1 << 16) |
+			     (powerbase1 << 8) | powerbase1;
+
+		*(mcsbase + i) = powerbase1;
+
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+			" [MCS power base index rf(%c) = 0x%x]\n",
+			((i == 0) ? 'A' : 'B'), *(mcsbase + i));
+	}
+}
+
+static void txpwr_by_regulatory(struct ieee80211_hw *hw, u8 channel, u8 index,
+				u32 *powerbase0, u32 *powerbase1,
+				u32 *p_outwriteval)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	u8 i, chnlgroup = 0, pwr_diff_limit[4];
+	u8 pwr_diff = 0, customer_pwr_diff;
+	u32 writeval, customer_limit, rf;
+
+	for (rf = 0; rf < 2; rf++) {
+		switch (rtlefuse->eeprom_regulatory) {
+		case 0:
+			chnlgroup = 0;
+
+			writeval =
+			    rtlphy->mcs_offset[chnlgroup][index + (rf ? 8 : 0)]
+			    + ((index < 2) ? powerbase0[rf] : powerbase1[rf]);
+
+			RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+				 "RTK better performance, "
+				 "writeval(%c) = 0x%x\n",
+				 ((rf == 0) ? 'A' : 'B'), writeval);
+			break;
+		case 1:
+			if (rtlphy->pwrgroup_cnt == 1) {
+				chnlgroup = 0;
+			} else {
+				if (channel < 3)
+					chnlgroup = 0;
+				else if (channel < 6)
+					chnlgroup = 1;
+				else if (channel < 9)
+					chnlgroup = 2;
+				else if (channel < 12)
+					chnlgroup = 3;
+				else if (channel < 14)
+					chnlgroup = 4;
+				else if (channel == 14)
+					chnlgroup = 5;
+			}
+			writeval = rtlphy->mcs_offset[chnlgroup]
+			    [index + (rf ? 8 : 0)] + ((index < 2) ?
+						      powerbase0[rf] :
+						      powerbase1[rf]);
+
+			RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+				 "Realtek regulatory, 20MHz, "
+				 "writeval(%c) = 0x%x\n",
+				 ((rf == 0) ? 'A' : 'B'), writeval);
+
+			break;
+		case 2:
+			writeval =
+			    ((index < 2) ? powerbase0[rf] : powerbase1[rf]);
+
+			RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+				 "Better regulatory, "
+				 "writeval(%c) = 0x%x\n",
+				 ((rf == 0) ? 'A' : 'B'), writeval);
+			break;
+		case 3:
+			chnlgroup = 0;
+
+			if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40) {
+				RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+					 "customer's limit, 40MHz "
+					 "rf(%c) = 0x%x\n",
+					 ((rf == 0) ? 'A' : 'B'),
+					 rtlefuse->pwrgroup_ht40[rf]
+					 [channel-1]);
+			} else {
+				RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+					 "customer's limit, 20MHz "
+					 "rf(%c) = 0x%x\n",
+					 ((rf == 0) ? 'A' : 'B'),
+					 rtlefuse->pwrgroup_ht20[rf]
+					 [channel-1]);
+			}
+
+			if (index < 2)
+				pwr_diff =
+				    rtlefuse->txpwr_legacyhtdiff[rf][channel-1];
+			else if (rtlphy->current_chan_bw ==
+				 HT_CHANNEL_WIDTH_20)
+				pwr_diff =
+				    rtlefuse->txpwr_ht20diff[rf][channel-1];
+
+			if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40)
+				customer_pwr_diff =
+					rtlefuse->pwrgroup_ht40[rf][channel-1];
+			else
+				customer_pwr_diff =
+					rtlefuse->pwrgroup_ht20[rf][channel-1];
+
+			if (pwr_diff > customer_pwr_diff)
+				pwr_diff = 0;
+			else
+				pwr_diff = customer_pwr_diff - pwr_diff;
+
+			for (i = 0; i < 4; i++) {
+				pwr_diff_limit[i] =
+				    (u8)((rtlphy->mcs_offset
+					  [chnlgroup][index + (rf ? 8 : 0)] &
+					  (0x7f << (i * 8))) >> (i * 8));
+
+					if (pwr_diff_limit[i] > pwr_diff)
+						pwr_diff_limit[i] = pwr_diff;
+			}
+
+			customer_limit = (pwr_diff_limit[3] << 24) |
+					 (pwr_diff_limit[2] << 16) |
+					 (pwr_diff_limit[1] << 8) |
+					 (pwr_diff_limit[0]);
+
+			RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+				"Customer's limit rf(%c) = 0x%x\n",
+				((rf == 0) ? 'A' : 'B'), customer_limit);
+
+			writeval = customer_limit + ((index < 2) ?
+						      powerbase0[rf] :
+						      powerbase1[rf]);
+
+			RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+				 "Customer, writeval rf(%c)= 0x%x\n",
+				 ((rf == 0) ? 'A' : 'B'), writeval);
+			break;
+		default:
+			chnlgroup = 0;
+			writeval =
+			    rtlphy->mcs_offset[chnlgroup]
+			    [index + (rf ? 8 : 0)]
+			    + ((index < 2) ? powerbase0[rf] : powerbase1[rf]);
+
+			RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+				 "RTK better performance, writeval "
+				 "rf(%c) = 0x%x\n",
+				 ((rf == 0) ? 'A' : 'B'), writeval);
+			break;
+		}
+
+		if (rtlpriv->dm.dynamic_txhighpower_lvl == TXHIGHPWRLEVEL_BT1)
+			writeval = writeval - 0x06060606;
+		else if (rtlpriv->dm.dynamic_txhighpower_lvl ==
+			 TXHIGHPWRLEVEL_BT2)
+			writeval = writeval - 0x0c0c0c0c;
+		*(p_outwriteval + rf) = writeval;
+	}
+}
+
+static void _rtl8723be_write_ofdm_power_reg(struct ieee80211_hw *hw,
+					 u8 index, u32 *value)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u16 regoffset_a[6] = {
+		RTXAGC_A_RATE18_06, RTXAGC_A_RATE54_24,
+		RTXAGC_A_MCS03_MCS00, RTXAGC_A_MCS07_MCS04,
+		RTXAGC_A_MCS11_MCS08, RTXAGC_A_MCS15_MCS12
+	};
+	u16 regoffset_b[6] = {
+		RTXAGC_B_RATE18_06, RTXAGC_B_RATE54_24,
+		RTXAGC_B_MCS03_MCS00, RTXAGC_B_MCS07_MCS04,
+		RTXAGC_B_MCS11_MCS08, RTXAGC_B_MCS15_MCS12
+	};
+	u8 i, rf, pwr_val[4];
+	u32 writeval;
+	u16 regoffset;
+
+	for (rf = 0; rf < 2; rf++) {
+		writeval = value[rf];
+		for (i = 0; i < 4; i++) {
+			pwr_val[i] = (u8) ((writeval & (0x7f <<
+							(i * 8))) >> (i * 8));
+
+			if (pwr_val[i] > RF6052_MAX_TX_PWR)
+				pwr_val[i] = RF6052_MAX_TX_PWR;
+		}
+		writeval = (pwr_val[3] << 24) | (pwr_val[2] << 16) |
+		    (pwr_val[1] << 8) | pwr_val[0];
+
+		if (rf == 0)
+			regoffset = regoffset_a[index];
+		else
+			regoffset = regoffset_b[index];
+		rtl_set_bbreg(hw, regoffset, MASKDWORD, writeval);
+
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+			 "Set 0x%x = %08x\n", regoffset, writeval);
+	}
+}
+
+void rtl8723be_phy_rf6052_set_ofdm_txpower(struct ieee80211_hw *hw,
+					   u8 *ppowerlevel_ofdm,
+					   u8 *ppowerlevel_bw20,
+					   u8 *ppowerlevel_bw40, u8 channel)
+{
+	u32 writeval[2], powerbase0[2], powerbase1[2];
+	u8 index;
+	u8 direction;
+	u32 pwrtrac_value;
+
+	rtl8723be_phy_get_power_base(hw, ppowerlevel_ofdm, ppowerlevel_bw20,
+				     ppowerlevel_bw40, channel,
+				     &powerbase0[0], &powerbase1[0]);
+
+	rtl8723be_dm_txpower_track_adjust(hw, 1, &direction, &pwrtrac_value);
+
+	for (index = 0; index < 6; index++) {
+		txpwr_by_regulatory(hw, channel, index, &powerbase0[0],
+				    &powerbase1[0], &writeval[0]);
+		if (direction == 1) {
+			writeval[0] += pwrtrac_value;
+			writeval[1] += pwrtrac_value;
+		} else if (direction == 2) {
+			writeval[0] -= pwrtrac_value;
+			writeval[1] -= pwrtrac_value;
+		}
+		_rtl8723be_write_ofdm_power_reg(hw, index, &writeval[0]);
+	}
+}
+
+bool rtl8723be_phy_rf6052_config(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+	if (rtlphy->rf_type == RF_1T1R)
+		rtlphy->num_total_rfpath = 1;
+	else
+		rtlphy->num_total_rfpath = 2;
+
+	return _rtl8723be_phy_rf6052_config_parafile(hw);
+}
+
+static bool _rtl8723be_phy_rf6052_config_parafile(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct bb_reg_def *pphyreg;
+	u32 u4_regvalue = 0;
+	u8 rfpath;
+	bool rtstatus = true;
+
+	for (rfpath = 0; rfpath < rtlphy->num_total_rfpath; rfpath++) {
+		pphyreg = &rtlphy->phyreg_def[rfpath];
+
+		switch (rfpath) {
+		case RF90_PATH_A:
+		case RF90_PATH_C:
+			u4_regvalue = rtl_get_bbreg(hw, pphyreg->rfintfs,
+						    BRFSI_RFENV);
+			break;
+		case RF90_PATH_B:
+		case RF90_PATH_D:
+			u4_regvalue = rtl_get_bbreg(hw, pphyreg->rfintfs,
+						    BRFSI_RFENV << 16);
+			break;
+		}
+
+		rtl_set_bbreg(hw, pphyreg->rfintfe, BRFSI_RFENV << 16, 0x1);
+		udelay(1);
+
+		rtl_set_bbreg(hw, pphyreg->rfintfo, BRFSI_RFENV, 0x1);
+		udelay(1);
+
+		rtl_set_bbreg(hw, pphyreg->rfhssi_para2,
+			      B3WIREADDREAALENGTH, 0x0);
+		udelay(1);
+
+		rtl_set_bbreg(hw, pphyreg->rfhssi_para2, B3WIREDATALENGTH, 0x0);
+		udelay(1);
+
+		switch (rfpath) {
+		case RF90_PATH_A:
+			rtstatus = rtl8723be_phy_config_rf_with_headerfile(hw,
+						      (enum radio_path)rfpath);
+			break;
+		case RF90_PATH_B:
+			rtstatus = rtl8723be_phy_config_rf_with_headerfile(hw,
+						      (enum radio_path)rfpath);
+			break;
+		case RF90_PATH_C:
+			break;
+		case RF90_PATH_D:
+			break;
+		}
+
+		switch (rfpath) {
+		case RF90_PATH_A:
+		case RF90_PATH_C:
+			rtl_set_bbreg(hw, pphyreg->rfintfs,
+				      BRFSI_RFENV, u4_regvalue);
+			break;
+		case RF90_PATH_B:
+		case RF90_PATH_D:
+			rtl_set_bbreg(hw, pphyreg->rfintfs,
+				      BRFSI_RFENV << 16, u4_regvalue);
+			break;
+		}
+
+		if (!rtstatus) {
+			RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+				 "Radio[%d] Fail!!", rfpath);
+			return false;
+		}
+	}
+
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, "\n");
+	return rtstatus;
+}
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/rf.h b/drivers/net/wireless/rtlwifi/rtl8723be/rf.h
new file mode 100644
index 000000000000..a6fea106ced4
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/rf.h
@@ -0,0 +1,43 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2014  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __RTL8723BE_RF_H__
+#define __RTL8723BE_RF_H__
+
+#define RF6052_MAX_TX_PWR		0x3F
+#define RF6052_MAX_REG			0x3F
+
+void rtl8723be_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw,
+					u8 bandwidth);
+void rtl8723be_phy_rf6052_set_cck_txpower(struct ieee80211_hw *hw,
+					  u8 *ppowerlevel);
+void rtl8723be_phy_rf6052_set_ofdm_txpower(struct ieee80211_hw *hw,
+					   u8 *ppowerlevel_ofdm,
+					   u8 *ppowerlevel_bw20,
+					   u8 *ppowerlevel_bw40,
+					   u8 channel);
+bool rtl8723be_phy_rf6052_config(struct ieee80211_hw *hw);
+
+#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/sw.c b/drivers/net/wireless/rtlwifi/rtl8723be/sw.c
new file mode 100644
index 000000000000..7834ae577b52
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/sw.c
@@ -0,0 +1,385 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2014  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "../core.h"
+#include "../pci.h"
+#include "reg.h"
+#include "def.h"
+#include "phy.h"
+#include "../rtl8723com/phy_common.h"
+#include "dm.h"
+#include "hw.h"
+#include "fw.h"
+#include "../rtl8723com/fw_common.h"
+#include "sw.h"
+#include "trx.h"
+#include "led.h"
+#include "table.h"
+#include "../btcoexist/rtl_btc.h"
+
+#include <linux/vmalloc.h>
+#include <linux/module.h>
+
+static void rtl8723be_init_aspm_vars(struct ieee80211_hw *hw)
+{
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+
+	/*close ASPM for AMD defaultly */
+	rtlpci->const_amdpci_aspm = 0;
+
+	/* ASPM PS mode.
+	 * 0 - Disable ASPM,
+	 * 1 - Enable ASPM without Clock Req,
+	 * 2 - Enable ASPM with Clock Req,
+	 * 3 - Alwyas Enable ASPM with Clock Req,
+	 * 4 - Always Enable ASPM without Clock Req.
+	 * set defult to RTL8192CE:3 RTL8192E:2
+	 */
+	rtlpci->const_pci_aspm = 3;
+
+	/*Setting for PCI-E device */
+	rtlpci->const_devicepci_aspm_setting = 0x03;
+
+	/*Setting for PCI-E bridge */
+	rtlpci->const_hostpci_aspm_setting = 0x02;
+
+	/* In Hw/Sw Radio Off situation.
+	 * 0 - Default,
+	 * 1 - From ASPM setting without low Mac Pwr,
+	 * 2 - From ASPM setting with low Mac Pwr,
+	 * 3 - Bus D3
+	 * set default to RTL8192CE:0 RTL8192SE:2
+	 */
+	rtlpci->const_hwsw_rfoff_d3 = 0;
+
+	/* This setting works for those device with
+	 * backdoor ASPM setting such as EPHY setting.
+	 * 0 - Not support ASPM,
+	 * 1 - Support ASPM,
+	 * 2 - According to chipset.
+	 */
+	rtlpci->const_support_pciaspm = 1;
+}
+
+int rtl8723be_init_sw_vars(struct ieee80211_hw *hw)
+{
+	int err = 0;
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+
+	rtl8723be_bt_reg_init(hw);
+	rtlpci->msi_support = true;
+	rtlpriv->btcoexist.btc_ops = rtl_btc_get_ops_pointer();
+
+	rtlpriv->dm.dm_initialgain_enable = 1;
+	rtlpriv->dm.dm_flag = 0;
+	rtlpriv->dm.disable_framebursting = 0;
+	rtlpriv->dm.thermalvalue = 0;
+	rtlpci->transmit_config = CFENDFORM | BIT(15) | BIT(24) | BIT(25);
+
+	mac->ht_enable = true;
+
+	/* compatible 5G band 88ce just 2.4G band & smsp */
+	rtlpriv->rtlhal.current_bandtype = BAND_ON_2_4G;
+	rtlpriv->rtlhal.bandset = BAND_ON_2_4G;
+	rtlpriv->rtlhal.macphymode = SINGLEMAC_SINGLEPHY;
+
+	rtlpci->receive_config = (RCR_APPFCS		|
+				  RCR_APP_MIC		|
+				  RCR_APP_ICV		|
+				  RCR_APP_PHYST_RXFF	|
+				  RCR_HTC_LOC_CTRL	|
+				  RCR_AMF		|
+				  RCR_ACF		|
+				  RCR_ADF		|
+				  RCR_AICV		|
+				  RCR_AB		|
+				  RCR_AM		|
+				  RCR_APM		|
+				  0);
+
+	rtlpci->irq_mask[0] = (u32) (IMR_PSTIMEOUT	|
+				     IMR_HSISR_IND_ON_INT	|
+				     IMR_C2HCMD		|
+				     IMR_HIGHDOK	|
+				     IMR_MGNTDOK	|
+				     IMR_BKDOK		|
+				     IMR_BEDOK		|
+				     IMR_VIDOK		|
+				     IMR_VODOK		|
+				     IMR_RDU		|
+				     IMR_ROK		|
+				     0);
+
+	rtlpci->irq_mask[1] = (u32)(IMR_RXFOVW | 0);
+
+	/* for debug level */
+	rtlpriv->dbg.global_debuglevel = rtlpriv->cfg->mod_params->debug;
+	/* for LPS & IPS */
+	rtlpriv->psc.inactiveps = rtlpriv->cfg->mod_params->inactiveps;
+	rtlpriv->psc.swctrl_lps = rtlpriv->cfg->mod_params->swctrl_lps;
+	rtlpriv->psc.fwctrl_lps = rtlpriv->cfg->mod_params->fwctrl_lps;
+	rtlpriv->psc.reg_fwctrl_lps = 3;
+	rtlpriv->psc.reg_max_lps_awakeintvl = 5;
+	/* for ASPM, you can close aspm through
+	 * set const_support_pciaspm = 0
+	 */
+	rtl8723be_init_aspm_vars(hw);
+
+	if (rtlpriv->psc.reg_fwctrl_lps == 1)
+		rtlpriv->psc.fwctrl_psmode = FW_PS_MIN_MODE;
+	else if (rtlpriv->psc.reg_fwctrl_lps == 2)
+		rtlpriv->psc.fwctrl_psmode = FW_PS_MAX_MODE;
+	else if (rtlpriv->psc.reg_fwctrl_lps == 3)
+		rtlpriv->psc.fwctrl_psmode = FW_PS_DTIM_MODE;
+
+	/* for firmware buf */
+	rtlpriv->rtlhal.pfirmware = vzalloc(0x8000);
+	if (!rtlpriv->rtlhal.pfirmware) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 "Can't alloc buffer for fw.\n");
+		return 1;
+	}
+
+	rtlpriv->max_fw_size = 0x8000;
+	pr_info("Using firmware %s\n", rtlpriv->cfg->fw_name);
+	err = request_firmware_nowait(THIS_MODULE, 1, rtlpriv->cfg->fw_name,
+				      rtlpriv->io.dev, GFP_KERNEL, hw,
+				      rtl_fw_cb);
+	if (err) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 "Failed to request firmware!\n");
+		return 1;
+	}
+	return 0;
+}
+
+void rtl8723be_deinit_sw_vars(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	if (rtlpriv->cfg->ops->get_btc_status())
+		rtlpriv->btcoexist.btc_ops->btc_halt_notify();
+	if (rtlpriv->rtlhal.pfirmware) {
+		vfree(rtlpriv->rtlhal.pfirmware);
+		rtlpriv->rtlhal.pfirmware = NULL;
+	}
+}
+
+/* get bt coexist status */
+bool rtl8723be_get_btc_status(void)
+{
+	return true;
+}
+
+static bool is_fw_header(struct rtl92c_firmware_header *hdr)
+{
+	return (hdr->signature & 0xfff0) == 0x5300;
+}
+
+static struct rtl_hal_ops rtl8723be_hal_ops = {
+	.init_sw_vars = rtl8723be_init_sw_vars,
+	.deinit_sw_vars = rtl8723be_deinit_sw_vars,
+	.read_eeprom_info = rtl8723be_read_eeprom_info,
+	.interrupt_recognized = rtl8723be_interrupt_recognized,
+	.hw_init = rtl8723be_hw_init,
+	.hw_disable = rtl8723be_card_disable,
+	.hw_suspend = rtl8723be_suspend,
+	.hw_resume = rtl8723be_resume,
+	.enable_interrupt = rtl8723be_enable_interrupt,
+	.disable_interrupt = rtl8723be_disable_interrupt,
+	.set_network_type = rtl8723be_set_network_type,
+	.set_chk_bssid = rtl8723be_set_check_bssid,
+	.set_qos = rtl8723be_set_qos,
+	.set_bcn_reg = rtl8723be_set_beacon_related_registers,
+	.set_bcn_intv = rtl8723be_set_beacon_interval,
+	.update_interrupt_mask = rtl8723be_update_interrupt_mask,
+	.get_hw_reg = rtl8723be_get_hw_reg,
+	.set_hw_reg = rtl8723be_set_hw_reg,
+	.update_rate_tbl = rtl8723be_update_hal_rate_tbl,
+	.fill_tx_desc = rtl8723be_tx_fill_desc,
+	.fill_tx_cmddesc = rtl8723be_tx_fill_cmddesc,
+	.query_rx_desc = rtl8723be_rx_query_desc,
+	.set_channel_access = rtl8723be_update_channel_access_setting,
+	.radio_onoff_checking = rtl8723be_gpio_radio_on_off_checking,
+	.set_bw_mode = rtl8723be_phy_set_bw_mode,
+	.switch_channel = rtl8723be_phy_sw_chnl,
+	.dm_watchdog = rtl8723be_dm_watchdog,
+	.scan_operation_backup = rtl8723be_phy_scan_operation_backup,
+	.set_rf_power_state = rtl8723be_phy_set_rf_power_state,
+	.led_control = rtl8723be_led_control,
+	.set_desc = rtl8723be_set_desc,
+	.get_desc = rtl8723be_get_desc,
+	.is_tx_desc_closed = rtl8723be_is_tx_desc_closed,
+	.tx_polling = rtl8723be_tx_polling,
+	.enable_hw_sec = rtl8723be_enable_hw_security_config,
+	.set_key = rtl8723be_set_key,
+	.init_sw_leds = rtl8723be_init_sw_leds,
+	.allow_all_destaddr = rtl8723be_allow_all_destaddr,
+	.get_bbreg = rtl8723_phy_query_bb_reg,
+	.set_bbreg = rtl8723_phy_set_bb_reg,
+	.get_rfreg = rtl8723be_phy_query_rf_reg,
+	.set_rfreg = rtl8723be_phy_set_rf_reg,
+	.fill_h2c_cmd = rtl8723be_fill_h2c_cmd,
+	.get_btc_status = rtl8723be_get_btc_status,
+	.is_fw_header = is_fw_header,
+};
+
+static struct rtl_mod_params rtl8723be_mod_params = {
+	.sw_crypto = false,
+	.inactiveps = true,
+	.swctrl_lps = false,
+	.fwctrl_lps = true,
+	.debug = DBG_EMERG,
+};
+
+static struct rtl_hal_cfg rtl8723be_hal_cfg = {
+	.bar_id = 2,
+	.write_readback = true,
+	.name = "rtl8723be_pci",
+	.fw_name = "rtlwifi/rtl8723befw.bin",
+	.ops = &rtl8723be_hal_ops,
+	.mod_params = &rtl8723be_mod_params,
+	.maps[SYS_ISO_CTRL] = REG_SYS_ISO_CTRL,
+	.maps[SYS_FUNC_EN] = REG_SYS_FUNC_EN,
+	.maps[SYS_CLK] = REG_SYS_CLKR,
+	.maps[MAC_RCR_AM] = AM,
+	.maps[MAC_RCR_AB] = AB,
+	.maps[MAC_RCR_ACRC32] = ACRC32,
+	.maps[MAC_RCR_ACF] = ACF,
+	.maps[MAC_RCR_AAP] = AAP,
+
+	.maps[EFUSE_ACCESS] = REG_EFUSE_ACCESS,
+
+	.maps[EFUSE_TEST] = REG_EFUSE_TEST,
+	.maps[EFUSE_CTRL] = REG_EFUSE_CTRL,
+	.maps[EFUSE_CLK] = 0,
+	.maps[EFUSE_CLK_CTRL] = REG_EFUSE_CTRL,
+	.maps[EFUSE_PWC_EV12V] = PWC_EV12V,
+	.maps[EFUSE_FEN_ELDR] = FEN_ELDR,
+	.maps[EFUSE_LOADER_CLK_EN] = LOADER_CLK_EN,
+	.maps[EFUSE_ANA8M] = ANA8M,
+	.maps[EFUSE_HWSET_MAX_SIZE] = HWSET_MAX_SIZE,
+	.maps[EFUSE_MAX_SECTION_MAP] = EFUSE_MAX_SECTION,
+	.maps[EFUSE_REAL_CONTENT_SIZE] = EFUSE_REAL_CONTENT_LEN,
+	.maps[EFUSE_OOB_PROTECT_BYTES_LEN] = EFUSE_OOB_PROTECT_BYTES,
+
+	.maps[RWCAM] = REG_CAMCMD,
+	.maps[WCAMI] = REG_CAMWRITE,
+	.maps[RCAMO] = REG_CAMREAD,
+	.maps[CAMDBG] = REG_CAMDBG,
+	.maps[SECR] = REG_SECCFG,
+	.maps[SEC_CAM_NONE] = CAM_NONE,
+	.maps[SEC_CAM_WEP40] = CAM_WEP40,
+	.maps[SEC_CAM_TKIP] = CAM_TKIP,
+	.maps[SEC_CAM_AES] = CAM_AES,
+	.maps[SEC_CAM_WEP104] = CAM_WEP104,
+
+	.maps[RTL_IMR_BCNDMAINT6] = IMR_BCNDMAINT6,
+	.maps[RTL_IMR_BCNDMAINT5] = IMR_BCNDMAINT5,
+	.maps[RTL_IMR_BCNDMAINT4] = IMR_BCNDMAINT4,
+	.maps[RTL_IMR_BCNDMAINT3] = IMR_BCNDMAINT3,
+	.maps[RTL_IMR_BCNDMAINT2] = IMR_BCNDMAINT2,
+	.maps[RTL_IMR_BCNDMAINT1] = IMR_BCNDMAINT1,
+	.maps[RTL_IMR_BCNDOK7] = IMR_BCNDOK7,
+	.maps[RTL_IMR_BCNDOK6] = IMR_BCNDOK6,
+	.maps[RTL_IMR_BCNDOK5] = IMR_BCNDOK5,
+	.maps[RTL_IMR_BCNDOK4] = IMR_BCNDOK4,
+	.maps[RTL_IMR_BCNDOK3] = IMR_BCNDOK3,
+	.maps[RTL_IMR_BCNDOK2] = IMR_BCNDOK2,
+	.maps[RTL_IMR_BCNDOK1] = IMR_BCNDOK1,
+
+	.maps[RTL_IMR_TXFOVW] = IMR_TXFOVW,
+	.maps[RTL_IMR_PSTIMEOUT] = IMR_PSTIMEOUT,
+	.maps[RTL_IMR_BCNINT] = IMR_BCNDMAINT0,
+	.maps[RTL_IMR_RXFOVW] = IMR_RXFOVW,
+	.maps[RTL_IMR_RDU] = IMR_RDU,
+	.maps[RTL_IMR_ATIMEND] = IMR_ATIMEND,
+	.maps[RTL_IMR_BDOK] = IMR_BCNDOK0,
+	.maps[RTL_IMR_MGNTDOK] = IMR_MGNTDOK,
+	.maps[RTL_IMR_TBDER] = IMR_TBDER,
+	.maps[RTL_IMR_HIGHDOK] = IMR_HIGHDOK,
+	.maps[RTL_IMR_TBDOK] = IMR_TBDOK,
+	.maps[RTL_IMR_BKDOK] = IMR_BKDOK,
+	.maps[RTL_IMR_BEDOK] = IMR_BEDOK,
+	.maps[RTL_IMR_VIDOK] = IMR_VIDOK,
+	.maps[RTL_IMR_VODOK] = IMR_VODOK,
+	.maps[RTL_IMR_ROK] = IMR_ROK,
+	.maps[RTL_IBSS_INT_MASKS] = (IMR_BCNDMAINT0 | IMR_TBDOK | IMR_TBDER),
+
+	.maps[RTL_RC_CCK_RATE1M] = DESC92C_RATE1M,
+	.maps[RTL_RC_CCK_RATE2M] = DESC92C_RATE2M,
+	.maps[RTL_RC_CCK_RATE5_5M] = DESC92C_RATE5_5M,
+	.maps[RTL_RC_CCK_RATE11M] = DESC92C_RATE11M,
+	.maps[RTL_RC_OFDM_RATE6M] = DESC92C_RATE6M,
+	.maps[RTL_RC_OFDM_RATE9M] = DESC92C_RATE9M,
+	.maps[RTL_RC_OFDM_RATE12M] = DESC92C_RATE12M,
+	.maps[RTL_RC_OFDM_RATE18M] = DESC92C_RATE18M,
+	.maps[RTL_RC_OFDM_RATE24M] = DESC92C_RATE24M,
+	.maps[RTL_RC_OFDM_RATE36M] = DESC92C_RATE36M,
+	.maps[RTL_RC_OFDM_RATE48M] = DESC92C_RATE48M,
+	.maps[RTL_RC_OFDM_RATE54M] = DESC92C_RATE54M,
+
+	.maps[RTL_RC_HT_RATEMCS7] = DESC92C_RATEMCS7,
+	.maps[RTL_RC_HT_RATEMCS15] = DESC92C_RATEMCS15,
+};
+
+static DEFINE_PCI_DEVICE_TABLE(rtl8723be_pci_id) = {
+	{RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0xb723, rtl8723be_hal_cfg)},
+	{},
+};
+
+MODULE_DEVICE_TABLE(pci, rtl8723be_pci_id);
+
+MODULE_AUTHOR("PageHe	<page_he@realsil.com.cn>");
+MODULE_AUTHOR("Realtek WlanFAE	<wlanfae@realtek.com>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Realtek 8723BE 802.11n PCI wireless");
+MODULE_FIRMWARE("rtlwifi/rtl8723befw.bin");
+
+module_param_named(swenc, rtl8723be_mod_params.sw_crypto, bool, 0444);
+module_param_named(debug, rtl8723be_mod_params.debug, int, 0444);
+module_param_named(ips, rtl8723be_mod_params.inactiveps, bool, 0444);
+module_param_named(swlps, rtl8723be_mod_params.swctrl_lps, bool, 0444);
+module_param_named(fwlps, rtl8723be_mod_params.fwctrl_lps, bool, 0444);
+MODULE_PARM_DESC(swenc, "using hardware crypto (default 0 [hardware])\n");
+MODULE_PARM_DESC(ips, "using no link power save (default 1 is open)\n");
+MODULE_PARM_DESC(fwlps, "using linked fw control power save (default 1 is open)\n");
+MODULE_PARM_DESC(debug, "Set debug level (0-5) (default 0)");
+
+static const SIMPLE_DEV_PM_OPS(rtlwifi_pm_ops, rtl_pci_suspend, rtl_pci_resume);
+
+static struct pci_driver rtl8723be_driver = {
+	.name = KBUILD_MODNAME,
+	.id_table = rtl8723be_pci_id,
+	.probe = rtl_pci_probe,
+	.remove = rtl_pci_disconnect,
+
+	.driver.pm = &rtlwifi_pm_ops,
+};
+
+module_pci_driver(rtl8723be_driver);
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/sw.h b/drivers/net/wireless/rtlwifi/rtl8723be/sw.h
new file mode 100644
index 000000000000..a7b25e769950
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/sw.h
@@ -0,0 +1,35 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2014  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __RTL8723BE_SW_H__
+#define __RTL8723BE_SW_H__
+
+int rtl8723be_init_sw_vars(struct ieee80211_hw *hw);
+void rtl8723be_deinit_sw_vars(struct ieee80211_hw *hw);
+void rtl8723be_init_var_map(struct ieee80211_hw *hw);
+bool rtl8723be_get_btc_status(void);
+
+
+#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/table.c b/drivers/net/wireless/rtlwifi/rtl8723be/table.c
new file mode 100644
index 000000000000..4b283cde042e
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/table.c
@@ -0,0 +1,572 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2014  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Created on  2010/ 5/18,  1:41
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "table.h"
+u32 RTL8723BEPHY_REG_1TARRAY[] = {
+	0x800, 0x80040000,
+	0x804, 0x00000003,
+	0x808, 0x0000FC00,
+	0x80C, 0x0000000A,
+	0x810, 0x10001331,
+	0x814, 0x020C3D10,
+	0x818, 0x02200385,
+	0x81C, 0x00000000,
+	0x820, 0x01000100,
+	0x824, 0x00390204,
+	0x828, 0x00000000,
+	0x82C, 0x00000000,
+	0x830, 0x00000000,
+	0x834, 0x00000000,
+	0x838, 0x00000000,
+	0x83C, 0x00000000,
+	0x840, 0x00010000,
+	0x844, 0x00000000,
+	0x848, 0x00000000,
+	0x84C, 0x00000000,
+	0x850, 0x00000000,
+	0x854, 0x00000000,
+	0x858, 0x569A11A9,
+	0x85C, 0x01000014,
+	0x860, 0x66F60110,
+	0x864, 0x061F0649,
+	0x868, 0x00000000,
+	0x86C, 0x27272700,
+	0x870, 0x07000760,
+	0x874, 0x25004000,
+	0x878, 0x00000808,
+	0x87C, 0x00000000,
+	0x880, 0xB0000C1C,
+	0x884, 0x00000001,
+	0x888, 0x00000000,
+	0x88C, 0xCCC000C0,
+	0x890, 0x00000800,
+	0x894, 0xFFFFFFFE,
+	0x898, 0x40302010,
+	0x89C, 0x00706050,
+	0x900, 0x00000000,
+	0x904, 0x00000023,
+	0x908, 0x00000000,
+	0x90C, 0x81121111,
+	0x910, 0x00000002,
+	0x914, 0x00000201,
+	0x948, 0x00000000,
+	0xA00, 0x00D047C8,
+	0xA04, 0x80FF000C,
+	0xA08, 0x8C838300,
+	0xA0C, 0x2E7F120F,
+	0xA10, 0x9500BB78,
+	0xA14, 0x1114D028,
+	0xA18, 0x00881117,
+	0xA1C, 0x89140F00,
+	0xA20, 0x1A1B0000,
+	0xA24, 0x090E1317,
+	0xA28, 0x00000204,
+	0xA2C, 0x00D30000,
+	0xA70, 0x101FBF00,
+	0xA74, 0x00000007,
+	0xA78, 0x00000900,
+	0xA7C, 0x225B0606,
+	0xA80, 0x21806490,
+	0xB2C, 0x00000000,
+	0xC00, 0x48071D40,
+	0xC04, 0x03A05611,
+	0xC08, 0x000000E4,
+	0xC0C, 0x6C6C6C6C,
+	0xC10, 0x08800000,
+	0xC14, 0x40000100,
+	0xC18, 0x08800000,
+	0xC1C, 0x40000100,
+	0xC20, 0x00000000,
+	0xC24, 0x00000000,
+	0xC28, 0x00000000,
+	0xC2C, 0x00000000,
+	0xC30, 0x69E9AC44,
+	0xC34, 0x469652AF,
+	0xC38, 0x49795994,
+	0xC3C, 0x0A97971C,
+	0xC40, 0x1F7C403F,
+	0xC44, 0x000100B7,
+	0xC48, 0xEC020107,
+	0xC4C, 0x007F037F,
+	0xC50, 0x69553420,
+	0xC54, 0x43BC0094,
+	0xC58, 0x00023169,
+	0xC5C, 0x00250492,
+	0xC60, 0x00000000,
+	0xC64, 0x7112848B,
+	0xC68, 0x47C00BFF,
+	0xC6C, 0x00000036,
+	0xC70, 0x2C7F000D,
+	0xC74, 0x020610DB,
+	0xC78, 0x0000001F,
+	0xC7C, 0x00B91612,
+	0xC80, 0x390000E4,
+	0xC84, 0x20F60000,
+	0xC88, 0x40000100,
+	0xC8C, 0x20200000,
+	0xC90, 0x00020E1A,
+	0xC94, 0x00000000,
+	0xC98, 0x00020E1A,
+	0xC9C, 0x00007F7F,
+	0xCA0, 0x00000000,
+	0xCA4, 0x000300A0,
+	0xCA8, 0x00000000,
+	0xCAC, 0x00000000,
+	0xCB0, 0x00000000,
+	0xCB4, 0x00000000,
+	0xCB8, 0x00000000,
+	0xCBC, 0x28000000,
+	0xCC0, 0x00000000,
+	0xCC4, 0x00000000,
+	0xCC8, 0x00000000,
+	0xCCC, 0x00000000,
+	0xCD0, 0x00000000,
+	0xCD4, 0x00000000,
+	0xCD8, 0x64B22427,
+	0xCDC, 0x00766932,
+	0xCE0, 0x00222222,
+	0xCE4, 0x00000000,
+	0xCE8, 0x37644302,
+	0xCEC, 0x2F97D40C,
+	0xD00, 0x00000740,
+	0xD04, 0x40020401,
+	0xD08, 0x0000907F,
+	0xD0C, 0x20010201,
+	0xD10, 0xA0633333,
+	0xD14, 0x3333BC53,
+	0xD18, 0x7A8F5B6F,
+	0xD2C, 0xCC979975,
+	0xD30, 0x00000000,
+	0xD34, 0x80608000,
+	0xD38, 0x00000000,
+	0xD3C, 0x00127353,
+	0xD40, 0x00000000,
+	0xD44, 0x00000000,
+	0xD48, 0x00000000,
+	0xD4C, 0x00000000,
+	0xD50, 0x6437140A,
+	0xD54, 0x00000000,
+	0xD58, 0x00000282,
+	0xD5C, 0x30032064,
+	0xD60, 0x4653DE68,
+	0xD64, 0x04518A3C,
+	0xD68, 0x00002101,
+	0xD6C, 0x2A201C16,
+	0xD70, 0x1812362E,
+	0xD74, 0x322C2220,
+	0xD78, 0x000E3C24,
+	0xE00, 0x2D2D2D2D,
+	0xE04, 0x2D2D2D2D,
+	0xE08, 0x0390272D,
+	0xE10, 0x2D2D2D2D,
+	0xE14, 0x2D2D2D2D,
+	0xE18, 0x2D2D2D2D,
+	0xE1C, 0x2D2D2D2D,
+	0xE28, 0x00000000,
+	0xE30, 0x1000DC1F,
+	0xE34, 0x10008C1F,
+	0xE38, 0x02140102,
+	0xE3C, 0x681604C2,
+	0xE40, 0x01007C00,
+	0xE44, 0x01004800,
+	0xE48, 0xFB000000,
+	0xE4C, 0x000028D1,
+	0xE50, 0x1000DC1F,
+	0xE54, 0x10008C1F,
+	0xE58, 0x02140102,
+	0xE5C, 0x28160D05,
+	0xE60, 0x00000008,
+	0xE68, 0x001B2556,
+	0xE6C, 0x00C00096,
+	0xE70, 0x00C00096,
+	0xE74, 0x01000056,
+	0xE78, 0x01000014,
+	0xE7C, 0x01000056,
+	0xE80, 0x01000014,
+	0xE84, 0x00C00096,
+	0xE88, 0x01000056,
+	0xE8C, 0x00C00096,
+	0xED0, 0x00C00096,
+	0xED4, 0x00C00096,
+	0xED8, 0x00C00096,
+	0xEDC, 0x000000D6,
+	0xEE0, 0x000000D6,
+	0xEEC, 0x01C00016,
+	0xF14, 0x00000003,
+	0xF4C, 0x00000000,
+	0xF00, 0x00000300,
+	0x820, 0x01000100,
+	0x800, 0x83040000,
+};
+
+u32 RTL8723BEPHY_REG_ARRAY_PG[] = {
+	0, 0, 0, 0x00000e08, 0x0000ff00, 0x00004000,
+	0, 0, 0, 0x0000086c, 0xffffff00, 0x34363800,
+	0, 0, 0, 0x00000e00, 0xffffffff, 0x42444646,
+	0, 0, 0, 0x00000e04, 0xffffffff, 0x30343840,
+	0, 0, 0, 0x00000e10, 0xffffffff, 0x38404244,
+	0, 0, 0, 0x00000e14, 0xffffffff, 0x26303436
+};
+
+u32 RTL8723BE_RADIOA_1TARRAY[] = {
+	0x000, 0x00010000,
+	0x0B0, 0x000DFFE0,
+	0x0FE, 0x00000000,
+	0x0FE, 0x00000000,
+	0x0FE, 0x00000000,
+	0x0B1, 0x00000018,
+	0x0FE, 0x00000000,
+	0x0FE, 0x00000000,
+	0x0FE, 0x00000000,
+	0x0B2, 0x00084C00,
+	0x0B5, 0x0000D2CC,
+	0x0B6, 0x000925AA,
+	0x0B7, 0x00000010,
+	0x0B8, 0x0000907F,
+	0x05C, 0x00000002,
+	0x07C, 0x00000002,
+	0x07E, 0x00000005,
+	0x08B, 0x0006FC00,
+	0x0B0, 0x000FF9F0,
+	0x01C, 0x000739D2,
+	0x01E, 0x00000000,
+	0x0DF, 0x00000780,
+	0x050, 0x00067435,
+	0x051, 0x0006B04E,
+	0x052, 0x000007D2,
+	0x053, 0x00000000,
+	0x054, 0x00050400,
+	0x055, 0x0004026E,
+	0x0DD, 0x0000004C,
+	0x070, 0x00067435,
+	0x071, 0x0006B04E,
+	0x072, 0x000007D2,
+	0x073, 0x00000000,
+	0x074, 0x00050400,
+	0x075, 0x0004026E,
+	0x0EF, 0x00000100,
+	0x034, 0x0000ADD7,
+	0x035, 0x00005C00,
+	0x034, 0x00009DD4,
+	0x035, 0x00005000,
+	0x034, 0x00008DD1,
+	0x035, 0x00004400,
+	0x034, 0x00007DCE,
+	0x035, 0x00003800,
+	0x034, 0x00006CD1,
+	0x035, 0x00004400,
+	0x034, 0x00005CCE,
+	0x035, 0x00003800,
+	0x034, 0x000048CE,
+	0x035, 0x00004400,
+	0x034, 0x000034CE,
+	0x035, 0x00003800,
+	0x034, 0x00002451,
+	0x035, 0x00004400,
+	0x034, 0x0000144E,
+	0x035, 0x00003800,
+	0x034, 0x00000051,
+	0x035, 0x00004400,
+	0x0EF, 0x00000000,
+	0x0EF, 0x00000100,
+	0x0ED, 0x00000010,
+	0x044, 0x0000ADD7,
+	0x044, 0x00009DD4,
+	0x044, 0x00008DD1,
+	0x044, 0x00007DCE,
+	0x044, 0x00006CC1,
+	0x044, 0x00005CCE,
+	0x044, 0x000044D1,
+	0x044, 0x000034CE,
+	0x044, 0x00002451,
+	0x044, 0x0000144E,
+	0x044, 0x00000051,
+	0x0EF, 0x00000000,
+	0x0ED, 0x00000000,
+	0x0EF, 0x00002000,
+	0x03B, 0x000380EF,
+	0x03B, 0x000302FE,
+	0x03B, 0x00028CE6,
+	0x03B, 0x000200BC,
+	0x03B, 0x000188A5,
+	0x03B, 0x00010FBC,
+	0x03B, 0x00008F71,
+	0x03B, 0x00000900,
+	0x0EF, 0x00000000,
+	0x0ED, 0x00000001,
+	0x040, 0x000380EF,
+	0x040, 0x000302FE,
+	0x040, 0x00028CE6,
+	0x040, 0x000200BC,
+	0x040, 0x000188A5,
+	0x040, 0x00010FBC,
+	0x040, 0x00008F71,
+	0x040, 0x00000900,
+	0x0ED, 0x00000000,
+	0x082, 0x00080000,
+	0x083, 0x00008000,
+	0x084, 0x00048D80,
+	0x085, 0x00068000,
+	0x0A2, 0x00080000,
+	0x0A3, 0x00008000,
+	0x0A4, 0x00048D80,
+	0x0A5, 0x00068000,
+	0x000, 0x00033D80,
+};
+
+u32 RTL8723BEMAC_1T_ARRAY[] = {
+	0x02F, 0x00000030,
+	0x035, 0x00000000,
+	0x428, 0x0000000A,
+	0x429, 0x00000010,
+	0x430, 0x00000000,
+	0x431, 0x00000000,
+	0x432, 0x00000000,
+	0x433, 0x00000001,
+	0x434, 0x00000004,
+	0x435, 0x00000005,
+	0x436, 0x00000007,
+	0x437, 0x00000008,
+	0x43C, 0x00000004,
+	0x43D, 0x00000005,
+	0x43E, 0x00000007,
+	0x43F, 0x00000008,
+	0x440, 0x0000005D,
+	0x441, 0x00000001,
+	0x442, 0x00000000,
+	0x444, 0x00000010,
+	0x445, 0x00000000,
+	0x446, 0x00000000,
+	0x447, 0x00000000,
+	0x448, 0x00000000,
+	0x449, 0x000000F0,
+	0x44A, 0x0000000F,
+	0x44B, 0x0000003E,
+	0x44C, 0x00000010,
+	0x44D, 0x00000000,
+	0x44E, 0x00000000,
+	0x44F, 0x00000000,
+	0x450, 0x00000000,
+	0x451, 0x000000F0,
+	0x452, 0x0000000F,
+	0x453, 0x00000000,
+	0x456, 0x0000005E,
+	0x460, 0x00000066,
+	0x461, 0x00000066,
+	0x4C8, 0x000000FF,
+	0x4C9, 0x00000008,
+	0x4CC, 0x000000FF,
+	0x4CD, 0x000000FF,
+	0x4CE, 0x00000001,
+	0x500, 0x00000026,
+	0x501, 0x000000A2,
+	0x502, 0x0000002F,
+	0x503, 0x00000000,
+	0x504, 0x00000028,
+	0x505, 0x000000A3,
+	0x506, 0x0000005E,
+	0x507, 0x00000000,
+	0x508, 0x0000002B,
+	0x509, 0x000000A4,
+	0x50A, 0x0000005E,
+	0x50B, 0x00000000,
+	0x50C, 0x0000004F,
+	0x50D, 0x000000A4,
+	0x50E, 0x00000000,
+	0x50F, 0x00000000,
+	0x512, 0x0000001C,
+	0x514, 0x0000000A,
+	0x516, 0x0000000A,
+	0x525, 0x0000004F,
+	0x550, 0x00000010,
+	0x551, 0x00000010,
+	0x559, 0x00000002,
+	0x55C, 0x00000050,
+	0x55D, 0x000000FF,
+	0x605, 0x00000030,
+	0x608, 0x0000000E,
+	0x609, 0x0000002A,
+	0x620, 0x000000FF,
+	0x621, 0x000000FF,
+	0x622, 0x000000FF,
+	0x623, 0x000000FF,
+	0x624, 0x000000FF,
+	0x625, 0x000000FF,
+	0x626, 0x000000FF,
+	0x627, 0x000000FF,
+	0x638, 0x00000050,
+	0x63C, 0x0000000A,
+	0x63D, 0x0000000A,
+	0x63E, 0x0000000E,
+	0x63F, 0x0000000E,
+	0x640, 0x00000040,
+	0x642, 0x00000040,
+	0x643, 0x00000000,
+	0x652, 0x000000C8,
+	0x66E, 0x00000005,
+	0x700, 0x00000021,
+	0x701, 0x00000043,
+	0x702, 0x00000065,
+	0x703, 0x00000087,
+	0x708, 0x00000021,
+	0x709, 0x00000043,
+	0x70A, 0x00000065,
+	0x70B, 0x00000087,
+};
+
+u32 RTL8723BEAGCTAB_1TARRAY[] = {
+	0xC78, 0xFD000001,
+	0xC78, 0xFC010001,
+	0xC78, 0xFB020001,
+	0xC78, 0xFA030001,
+	0xC78, 0xF9040001,
+	0xC78, 0xF8050001,
+	0xC78, 0xF7060001,
+	0xC78, 0xF6070001,
+	0xC78, 0xF5080001,
+	0xC78, 0xF4090001,
+	0xC78, 0xF30A0001,
+	0xC78, 0xF20B0001,
+	0xC78, 0xF10C0001,
+	0xC78, 0xF00D0001,
+	0xC78, 0xEF0E0001,
+	0xC78, 0xEE0F0001,
+	0xC78, 0xED100001,
+	0xC78, 0xEC110001,
+	0xC78, 0xEB120001,
+	0xC78, 0xEA130001,
+	0xC78, 0xE9140001,
+	0xC78, 0xE8150001,
+	0xC78, 0xE7160001,
+	0xC78, 0xAA170001,
+	0xC78, 0xA9180001,
+	0xC78, 0xA8190001,
+	0xC78, 0xA71A0001,
+	0xC78, 0xA61B0001,
+	0xC78, 0xA51C0001,
+	0xC78, 0xA41D0001,
+	0xC78, 0xA31E0001,
+	0xC78, 0x671F0001,
+	0xC78, 0x66200001,
+	0xC78, 0x65210001,
+	0xC78, 0x64220001,
+	0xC78, 0x63230001,
+	0xC78, 0x62240001,
+	0xC78, 0x61250001,
+	0xC78, 0x47260001,
+	0xC78, 0x46270001,
+	0xC78, 0x45280001,
+	0xC78, 0x44290001,
+	0xC78, 0x432A0001,
+	0xC78, 0x422B0001,
+	0xC78, 0x292C0001,
+	0xC78, 0x282D0001,
+	0xC78, 0x272E0001,
+	0xC78, 0x262F0001,
+	0xC78, 0x25300001,
+	0xC78, 0x24310001,
+	0xC78, 0x09320001,
+	0xC78, 0x08330001,
+	0xC78, 0x07340001,
+	0xC78, 0x06350001,
+	0xC78, 0x05360001,
+	0xC78, 0x04370001,
+	0xC78, 0x03380001,
+	0xC78, 0x02390001,
+	0xC78, 0x013A0001,
+	0xC78, 0x003B0001,
+	0xC78, 0x003C0001,
+	0xC78, 0x003D0001,
+	0xC78, 0x003E0001,
+	0xC78, 0x003F0001,
+	0xC78, 0xFC400001,
+	0xC78, 0xFB410001,
+	0xC78, 0xFA420001,
+	0xC78, 0xF9430001,
+	0xC78, 0xF8440001,
+	0xC78, 0xF7450001,
+	0xC78, 0xF6460001,
+	0xC78, 0xF5470001,
+	0xC78, 0xF4480001,
+	0xC78, 0xF3490001,
+	0xC78, 0xF24A0001,
+	0xC78, 0xF14B0001,
+	0xC78, 0xF04C0001,
+	0xC78, 0xEF4D0001,
+	0xC78, 0xEE4E0001,
+	0xC78, 0xED4F0001,
+	0xC78, 0xEC500001,
+	0xC78, 0xEB510001,
+	0xC78, 0xEA520001,
+	0xC78, 0xE9530001,
+	0xC78, 0xE8540001,
+	0xC78, 0xE7550001,
+	0xC78, 0xE6560001,
+	0xC78, 0xE5570001,
+	0xC78, 0xAA580001,
+	0xC78, 0xA9590001,
+	0xC78, 0xA85A0001,
+	0xC78, 0xA75B0001,
+	0xC78, 0xA65C0001,
+	0xC78, 0xA55D0001,
+	0xC78, 0xA45E0001,
+	0xC78, 0x675F0001,
+	0xC78, 0x66600001,
+	0xC78, 0x65610001,
+	0xC78, 0x64620001,
+	0xC78, 0x63630001,
+	0xC78, 0x62640001,
+	0xC78, 0x61650001,
+	0xC78, 0x47660001,
+	0xC78, 0x46670001,
+	0xC78, 0x45680001,
+	0xC78, 0x44690001,
+	0xC78, 0x436A0001,
+	0xC78, 0x426B0001,
+	0xC78, 0x296C0001,
+	0xC78, 0x286D0001,
+	0xC78, 0x276E0001,
+	0xC78, 0x266F0001,
+	0xC78, 0x25700001,
+	0xC78, 0x24710001,
+	0xC78, 0x09720001,
+	0xC78, 0x08730001,
+	0xC78, 0x07740001,
+	0xC78, 0x06750001,
+	0xC78, 0x05760001,
+	0xC78, 0x04770001,
+	0xC78, 0x03780001,
+	0xC78, 0x02790001,
+	0xC78, 0x017A0001,
+	0xC78, 0x007B0001,
+	0xC78, 0x007C0001,
+	0xC78, 0x007D0001,
+	0xC78, 0x007E0001,
+	0xC78, 0x007F0001,
+	0xC50, 0x69553422,
+	0xC50, 0x69553420,
+};
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/table.h b/drivers/net/wireless/rtlwifi/rtl8723be/table.h
new file mode 100644
index 000000000000..932760a84827
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/table.h
@@ -0,0 +1,43 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2014  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Created on  2010/ 5/18,  1:41
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __RTL8723BE_TABLE__H_
+#define __RTL8723BE_TABLE__H_
+
+#include <linux/types.h>
+#define  RTL8723BEPHY_REG_1TARRAYLEN	388
+extern u32 RTL8723BEPHY_REG_1TARRAY[];
+#define RTL8723BEPHY_REG_ARRAY_PGLEN	36
+extern u32 RTL8723BEPHY_REG_ARRAY_PG[];
+#define	RTL8723BE_RADIOA_1TARRAYLEN	206
+extern u32 RTL8723BE_RADIOA_1TARRAY[];
+#define RTL8723BEMAC_1T_ARRAYLEN	194
+extern u32 RTL8723BEMAC_1T_ARRAY[];
+#define RTL8723BEAGCTAB_1TARRAYLEN	260
+extern u32 RTL8723BEAGCTAB_1TARRAY[];
+
+#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/trx.c b/drivers/net/wireless/rtlwifi/rtl8723be/trx.c
new file mode 100644
index 000000000000..7779531919fb
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/trx.c
@@ -0,0 +1,959 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2014  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "../pci.h"
+#include "../base.h"
+#include "../stats.h"
+#include "reg.h"
+#include "def.h"
+#include "phy.h"
+#include "trx.h"
+#include "led.h"
+#include "dm.h"
+#include "phy.h"
+
+static u8 _rtl8723be_map_hwqueue_to_fwqueue(struct sk_buff *skb, u8 hw_queue)
+{
+	__le16 fc = rtl_get_fc(skb);
+
+	if (unlikely(ieee80211_is_beacon(fc)))
+		return QSLT_BEACON;
+	if (ieee80211_is_mgmt(fc) || ieee80211_is_ctl(fc))
+		return QSLT_MGNT;
+
+	return skb->priority;
+}
+
+/* mac80211's rate_idx is like this:
+ *
+ * 2.4G band:rx_status->band == IEEE80211_BAND_2GHZ
+ *
+ * B/G rate:
+ * (rx_status->flag & RX_FLAG_HT) = 0,
+ * DESC92C_RATE1M-->DESC92C_RATE54M ==> idx is 0-->11,
+ *
+ * N rate:
+ * (rx_status->flag & RX_FLAG_HT) = 1,
+ * DESC92C_RATEMCS0-->DESC92C_RATEMCS15 ==> idx is 0-->15
+ *
+ * 5G band:rx_status->band == IEEE80211_BAND_5GHZ
+ * A rate:
+ * (rx_status->flag & RX_FLAG_HT) = 0,
+ * DESC92C_RATE6M-->DESC92C_RATE54M ==> idx is 0-->7,
+ *
+ * N rate:
+ * (rx_status->flag & RX_FLAG_HT) = 1,
+ * DESC92C_RATEMCS0-->DESC92C_RATEMCS15 ==> idx is 0-->15
+ */
+static int _rtl8723be_rate_mapping(struct ieee80211_hw *hw,
+				   bool isht, u8 desc_rate)
+{
+	int rate_idx;
+
+	if (!isht) {
+		if (IEEE80211_BAND_2GHZ == hw->conf.chandef.chan->band) {
+			switch (desc_rate) {
+			case DESC92C_RATE1M:
+				rate_idx = 0;
+				break;
+			case DESC92C_RATE2M:
+				rate_idx = 1;
+				break;
+			case DESC92C_RATE5_5M:
+				rate_idx = 2;
+				break;
+			case DESC92C_RATE11M:
+				rate_idx = 3;
+				break;
+			case DESC92C_RATE6M:
+				rate_idx = 4;
+				break;
+			case DESC92C_RATE9M:
+				rate_idx = 5;
+				break;
+			case DESC92C_RATE12M:
+				rate_idx = 6;
+				break;
+			case DESC92C_RATE18M:
+				rate_idx = 7;
+				break;
+			case DESC92C_RATE24M:
+				rate_idx = 8;
+				break;
+			case DESC92C_RATE36M:
+				rate_idx = 9;
+				break;
+			case DESC92C_RATE48M:
+				rate_idx = 10;
+				break;
+			case DESC92C_RATE54M:
+				rate_idx = 11;
+				break;
+			default:
+				rate_idx = 0;
+				break;
+			}
+		} else {
+			switch (desc_rate) {
+			case DESC92C_RATE6M:
+				rate_idx = 0;
+				break;
+			case DESC92C_RATE9M:
+				rate_idx = 1;
+				break;
+			case DESC92C_RATE12M:
+				rate_idx = 2;
+				break;
+			case DESC92C_RATE18M:
+				rate_idx = 3;
+				break;
+			case DESC92C_RATE24M:
+				rate_idx = 4;
+				break;
+			case DESC92C_RATE36M:
+				rate_idx = 5;
+				break;
+			case DESC92C_RATE48M:
+				rate_idx = 6;
+				break;
+			case DESC92C_RATE54M:
+				rate_idx = 7;
+				break;
+			default:
+				rate_idx = 0;
+				break;
+			}
+		}
+	} else {
+		switch (desc_rate) {
+		case DESC92C_RATEMCS0:
+			rate_idx = 0;
+			break;
+		case DESC92C_RATEMCS1:
+			rate_idx = 1;
+			break;
+		case DESC92C_RATEMCS2:
+			rate_idx = 2;
+			break;
+		case DESC92C_RATEMCS3:
+			rate_idx = 3;
+			break;
+		case DESC92C_RATEMCS4:
+			rate_idx = 4;
+			break;
+		case DESC92C_RATEMCS5:
+			rate_idx = 5;
+			break;
+		case DESC92C_RATEMCS6:
+			rate_idx = 6;
+			break;
+		case DESC92C_RATEMCS7:
+			rate_idx = 7;
+			break;
+		case DESC92C_RATEMCS8:
+			rate_idx = 8;
+			break;
+		case DESC92C_RATEMCS9:
+			rate_idx = 9;
+			break;
+		case DESC92C_RATEMCS10:
+			rate_idx = 10;
+			break;
+		case DESC92C_RATEMCS11:
+			rate_idx = 11;
+			break;
+		case DESC92C_RATEMCS12:
+			rate_idx = 12;
+			break;
+		case DESC92C_RATEMCS13:
+			rate_idx = 13;
+			break;
+		case DESC92C_RATEMCS14:
+			rate_idx = 14;
+			break;
+		case DESC92C_RATEMCS15:
+			rate_idx = 15;
+			break;
+		default:
+			rate_idx = 0;
+			break;
+		}
+	}
+	return rate_idx;
+}
+
+static void _rtl8723be_query_rxphystatus(struct ieee80211_hw *hw,
+					 struct rtl_stats *pstatus, u8 *pdesc,
+					 struct rx_fwinfo_8723be *p_drvinfo,
+					 bool packet_match_bssid,
+					 bool packet_toself,
+					 bool packet_beacon)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtlpriv);
+	struct phy_sts_cck_8723e_t *cck_buf;
+	struct phy_status_rpt *p_phystrpt = (struct phy_status_rpt *)p_drvinfo;
+	struct rtl_dm *rtldm = rtl_dm(rtl_priv(hw));
+	char rx_pwr_all = 0, rx_pwr[4];
+	u8 rf_rx_num = 0, evm, pwdb_all;
+	u8 i, max_spatial_stream;
+	u32 rssi, total_rssi = 0;
+	bool is_cck = pstatus->is_cck;
+	u8 lan_idx, vga_idx;
+
+	/* Record it for next packet processing */
+	pstatus->packet_matchbssid = packet_match_bssid;
+	pstatus->packet_toself = packet_toself;
+	pstatus->packet_beacon = packet_beacon;
+	pstatus->rx_mimo_sig_qual[0] = -1;
+	pstatus->rx_mimo_sig_qual[1] = -1;
+
+	if (is_cck) {
+		u8 cck_highpwr;
+		u8 cck_agc_rpt;
+		/* CCK Driver info Structure is not the same as OFDM packet. */
+		cck_buf = (struct phy_sts_cck_8723e_t *)p_drvinfo;
+		cck_agc_rpt = cck_buf->cck_agc_rpt;
+
+		/* (1)Hardware does not provide RSSI for CCK
+		 * (2)PWDB, Average PWDB cacluated by
+		 * hardware (for rate adaptive)
+		 */
+		if (ppsc->rfpwr_state == ERFON)
+			cck_highpwr = (u8) rtl_get_bbreg(hw,
+						       RFPGA0_XA_HSSIPARAMETER2,
+						       BIT(9));
+		else
+			cck_highpwr = false;
+
+		lan_idx = ((cck_agc_rpt & 0xE0) >> 5);
+		vga_idx = (cck_agc_rpt & 0x1f);
+		switch (lan_idx) {
+		case 7:
+			if (vga_idx <= 27)/*VGA_idx = 27~2*/
+				rx_pwr_all = -100 + 2 * (27 - vga_idx);
+			else
+				rx_pwr_all = -100;
+			break;
+		case 6:/*VGA_idx = 2~0*/
+			rx_pwr_all = -48 + 2 * (2 - vga_idx);
+			break;
+		case 5:/*VGA_idx = 7~5*/
+			rx_pwr_all = -42 + 2 * (7 - vga_idx);
+			break;
+		case 4:/*VGA_idx = 7~4*/
+			rx_pwr_all = -36 + 2 * (7 - vga_idx);
+			break;
+		case 3:/*VGA_idx = 7~0*/
+			rx_pwr_all = -24 + 2 * (7 - vga_idx);
+			break;
+		case 2:
+			if (cck_highpwr)/*VGA_idx = 5~0*/
+				rx_pwr_all = -12 + 2 * (5 - vga_idx);
+			else
+				rx_pwr_all = -6 + 2 * (5 - vga_idx);
+			break;
+		case 1:
+			rx_pwr_all = 8 - 2 * vga_idx;
+			break;
+		case 0:
+			rx_pwr_all = 14 - 2 * vga_idx;
+			break;
+		default:
+			break;
+		}
+		rx_pwr_all += 6;
+		pwdb_all = rtl_query_rxpwrpercentage(rx_pwr_all);
+		/* CCK gain is smaller than OFDM/MCS gain,  */
+		/* so we add gain diff by experiences,
+		 * the val is 6
+		 */
+		pwdb_all += 6;
+		if (pwdb_all > 100)
+			pwdb_all = 100;
+		/* modify the offset to make the same gain index with OFDM. */
+		if (pwdb_all > 34 && pwdb_all <= 42)
+			pwdb_all -= 2;
+		else if (pwdb_all > 26 && pwdb_all <= 34)
+			pwdb_all -= 6;
+		else if (pwdb_all > 14 && pwdb_all <= 26)
+			pwdb_all -= 8;
+		else if (pwdb_all > 4 && pwdb_all <= 14)
+			pwdb_all -= 4;
+		if (!cck_highpwr) {
+			if (pwdb_all >= 80)
+				pwdb_all = ((pwdb_all - 80) << 1) +
+					   ((pwdb_all - 80) >> 1) + 80;
+			else if ((pwdb_all <= 78) && (pwdb_all >= 20))
+				pwdb_all += 3;
+			if (pwdb_all > 100)
+				pwdb_all = 100;
+		}
+
+		pstatus->rx_pwdb_all = pwdb_all;
+		pstatus->recvsignalpower = rx_pwr_all;
+
+		/* (3) Get Signal Quality (EVM) */
+		if (packet_match_bssid) {
+			u8 sq;
+
+			if (pstatus->rx_pwdb_all > 40) {
+				sq = 100;
+			} else {
+				sq = cck_buf->sq_rpt;
+				if (sq > 64)
+					sq = 0;
+				else if (sq < 20)
+					sq = 100;
+				else
+					sq = ((64 - sq) * 100) / 44;
+			}
+
+			pstatus->signalquality = sq;
+			pstatus->rx_mimo_sig_qual[0] = sq;
+			pstatus->rx_mimo_sig_qual[1] = -1;
+		}
+	} else {
+		rtlpriv->dm.rfpath_rxenable[0] = true;
+		rtlpriv->dm.rfpath_rxenable[1] = true;
+
+		/* (1)Get RSSI for HT rate */
+		for (i = RF90_PATH_A; i < RF6052_MAX_PATH; i++) {
+			/* we will judge RF RX path now. */
+			if (rtlpriv->dm.rfpath_rxenable[i])
+				rf_rx_num++;
+
+			rx_pwr[i] = ((p_drvinfo->gain_trsw[i] & 0x3f)*2) - 110;
+
+			/* Translate DBM to percentage. */
+			rssi = rtl_query_rxpwrpercentage(rx_pwr[i]);
+			total_rssi += rssi;
+
+			/* Get Rx snr value in DB */
+			rtlpriv->stats.rx_snr_db[i] =
+					(long)(p_drvinfo->rxsnr[i] / 2);
+
+			/* Record Signal Strength for next packet */
+			if (packet_match_bssid)
+				pstatus->rx_mimo_signalstrength[i] = (u8) rssi;
+		}
+
+		/* (2)PWDB, Avg cacluated by hardware (for rate adaptive) */
+		rx_pwr_all = ((p_drvinfo->pwdb_all >> 1) & 0x7f) - 110;
+
+		pwdb_all = rtl_query_rxpwrpercentage(rx_pwr_all);
+		pstatus->rx_pwdb_all = pwdb_all;
+		pstatus->rxpower = rx_pwr_all;
+		pstatus->recvsignalpower = rx_pwr_all;
+
+		/* (3)EVM of HT rate */
+		if (pstatus->is_ht && pstatus->rate >= DESC92C_RATEMCS8 &&
+		    pstatus->rate <= DESC92C_RATEMCS15)
+			max_spatial_stream = 2;
+		else
+			max_spatial_stream = 1;
+
+		for (i = 0; i < max_spatial_stream; i++) {
+			evm = rtl_evm_db_to_percentage(p_drvinfo->rxevm[i]);
+
+			if (packet_match_bssid) {
+				/* Fill value in RFD, Get the first
+				 * spatial stream only
+				 */
+				if (i == 0)
+					pstatus->signalquality =
+							(u8) (evm & 0xff);
+				pstatus->rx_mimo_sig_qual[i] =
+							(u8) (evm & 0xff);
+			}
+		}
+		if (packet_match_bssid) {
+			for (i = RF90_PATH_A; i <= RF90_PATH_B; i++)
+				rtl_priv(hw)->dm.cfo_tail[i] =
+					(char)p_phystrpt->path_cfotail[i];
+
+			rtl_priv(hw)->dm.packet_count++;
+			if (rtl_priv(hw)->dm.packet_count == 0xffffffff)
+				rtl_priv(hw)->dm.packet_count = 0;
+		}
+	}
+
+	/* UI BSS List signal strength(in percentage),
+	 * make it good looking, from 0~100.
+	 */
+	if (is_cck)
+		pstatus->signalstrength = (u8)(rtl_signal_scale_mapping(hw,
+								pwdb_all));
+	else if (rf_rx_num != 0)
+		pstatus->signalstrength = (u8)(rtl_signal_scale_mapping(hw,
+						total_rssi /= rf_rx_num));
+	/*HW antenna diversity*/
+	rtldm->fat_table.antsel_rx_keep_0 = p_phystrpt->ant_sel;
+	rtldm->fat_table.antsel_rx_keep_1 = p_phystrpt->ant_sel_b;
+	rtldm->fat_table.antsel_rx_keep_2 = p_phystrpt->antsel_rx_keep_2;
+}
+
+static void _rtl8723be_translate_rx_signal_stuff(struct ieee80211_hw *hw,
+					struct sk_buff *skb,
+					struct rtl_stats *pstatus,
+					u8 *pdesc,
+					struct rx_fwinfo_8723be *p_drvinfo)
+{
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	struct ieee80211_hdr *hdr;
+	u8 *tmp_buf;
+	u8 *praddr;
+	u8 *psaddr;
+	u16 fc, type;
+	bool packet_matchbssid, packet_toself, packet_beacon;
+
+	tmp_buf = skb->data + pstatus->rx_drvinfo_size + pstatus->rx_bufshift;
+
+	hdr = (struct ieee80211_hdr *)tmp_buf;
+	fc = le16_to_cpu(hdr->frame_control);
+	type = WLAN_FC_GET_TYPE(hdr->frame_control);
+	praddr = hdr->addr1;
+	psaddr = ieee80211_get_SA(hdr);
+	memcpy(pstatus->psaddr, psaddr, ETH_ALEN);
+
+	packet_matchbssid = ((IEEE80211_FTYPE_CTL != type) &&
+	     (!ether_addr_equal(mac->bssid, (fc & IEEE80211_FCTL_TODS) ?
+				hdr->addr1 : (fc & IEEE80211_FCTL_FROMDS) ?
+				hdr->addr2 : hdr->addr3)) &&
+				(!pstatus->hwerror) &&
+				(!pstatus->crc) && (!pstatus->icv));
+
+	packet_toself = packet_matchbssid &&
+	    (!ether_addr_equal(praddr, rtlefuse->dev_addr));
+
+	/* YP: packet_beacon is not initialized,
+	 * this assignment is neccesary,
+	 * otherwise it counld be true in this case
+	 * the situation is much worse in Kernel 3.10
+	 */
+	if (ieee80211_is_beacon(hdr->frame_control))
+		packet_beacon = true;
+	else
+		packet_beacon = false;
+
+	if (packet_beacon && packet_matchbssid)
+		rtl_priv(hw)->dm.dbginfo.num_qry_beacon_pkt++;
+
+	_rtl8723be_query_rxphystatus(hw, pstatus, pdesc, p_drvinfo,
+				     packet_matchbssid,
+				     packet_toself,
+				     packet_beacon);
+
+	rtl_process_phyinfo(hw, tmp_buf, pstatus);
+}
+
+static void _rtl8723be_insert_emcontent(struct rtl_tcb_desc *ptcb_desc,
+					u8 *virtualaddress)
+{
+	u32 dwtmp = 0;
+	memset(virtualaddress, 0, 8);
+
+	SET_EARLYMODE_PKTNUM(virtualaddress, ptcb_desc->empkt_num);
+	if (ptcb_desc->empkt_num == 1) {
+		dwtmp = ptcb_desc->empkt_len[0];
+	} else {
+		dwtmp = ptcb_desc->empkt_len[0];
+		dwtmp += ((dwtmp % 4) ? (4 - dwtmp % 4) : 0) + 4;
+		dwtmp += ptcb_desc->empkt_len[1];
+	}
+	SET_EARLYMODE_LEN0(virtualaddress, dwtmp);
+
+	if (ptcb_desc->empkt_num <= 3) {
+		dwtmp = ptcb_desc->empkt_len[2];
+	} else {
+		dwtmp = ptcb_desc->empkt_len[2];
+		dwtmp += ((dwtmp % 4) ? (4 - dwtmp % 4) : 0) + 4;
+		dwtmp += ptcb_desc->empkt_len[3];
+	}
+	SET_EARLYMODE_LEN1(virtualaddress, dwtmp);
+	if (ptcb_desc->empkt_num <= 5) {
+		dwtmp = ptcb_desc->empkt_len[4];
+	} else {
+		dwtmp = ptcb_desc->empkt_len[4];
+		dwtmp += ((dwtmp % 4) ? (4 - dwtmp % 4) : 0) + 4;
+		dwtmp += ptcb_desc->empkt_len[5];
+	}
+	SET_EARLYMODE_LEN2_1(virtualaddress, dwtmp & 0xF);
+	SET_EARLYMODE_LEN2_2(virtualaddress, dwtmp >> 4);
+	if (ptcb_desc->empkt_num <= 7) {
+		dwtmp = ptcb_desc->empkt_len[6];
+	} else {
+		dwtmp = ptcb_desc->empkt_len[6];
+		dwtmp += ((dwtmp % 4) ? (4 - dwtmp % 4) : 0) + 4;
+		dwtmp += ptcb_desc->empkt_len[7];
+	}
+	SET_EARLYMODE_LEN3(virtualaddress, dwtmp);
+	if (ptcb_desc->empkt_num <= 9) {
+		dwtmp = ptcb_desc->empkt_len[8];
+	} else {
+		dwtmp = ptcb_desc->empkt_len[8];
+		dwtmp += ((dwtmp % 4) ? (4 - dwtmp % 4) : 0) + 4;
+		dwtmp += ptcb_desc->empkt_len[9];
+	}
+	SET_EARLYMODE_LEN4(virtualaddress, dwtmp);
+}
+
+bool rtl8723be_rx_query_desc(struct ieee80211_hw *hw,
+			     struct rtl_stats *status,
+			     struct ieee80211_rx_status *rx_status,
+			     u8 *pdesc, struct sk_buff *skb)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rx_fwinfo_8723be *p_drvinfo;
+	struct ieee80211_hdr *hdr;
+
+	u32 phystatus = GET_RX_DESC_PHYST(pdesc);
+	status->packet_report_type = (u8)GET_RX_STATUS_DESC_RPT_SEL(pdesc);
+	if (status->packet_report_type == TX_REPORT2)
+		status->length = (u16) GET_RX_RPT2_DESC_PKT_LEN(pdesc);
+	else
+		status->length = (u16) GET_RX_DESC_PKT_LEN(pdesc);
+	status->rx_drvinfo_size = (u8) GET_RX_DESC_DRV_INFO_SIZE(pdesc) *
+				  RX_DRV_INFO_SIZE_UNIT;
+	status->rx_bufshift = (u8) (GET_RX_DESC_SHIFT(pdesc) & 0x03);
+	status->icv = (u16) GET_RX_DESC_ICV(pdesc);
+	status->crc = (u16) GET_RX_DESC_CRC32(pdesc);
+	status->hwerror = (status->crc | status->icv);
+	status->decrypted = !GET_RX_DESC_SWDEC(pdesc);
+	status->rate = (u8) GET_RX_DESC_RXMCS(pdesc);
+	status->shortpreamble = (u16) GET_RX_DESC_SPLCP(pdesc);
+	status->isampdu = (bool) (GET_RX_DESC_PAGGR(pdesc) == 1);
+	status->isfirst_ampdu = (bool) (GET_RX_DESC_PAGGR(pdesc) == 1);
+	if (status->packet_report_type == NORMAL_RX)
+		status->timestamp_low = GET_RX_DESC_TSFL(pdesc);
+	status->rx_is40Mhzpacket = (bool) GET_RX_DESC_BW(pdesc);
+	status->is_ht = (bool)GET_RX_DESC_RXHT(pdesc);
+
+	status->is_cck = RTL8723E_RX_HAL_IS_CCK_RATE(status->rate);
+
+	status->macid = GET_RX_DESC_MACID(pdesc);
+	if (GET_RX_STATUS_DESC_MAGIC_MATCH(pdesc))
+		status->wake_match = BIT(2);
+	else if (GET_RX_STATUS_DESC_MAGIC_MATCH(pdesc))
+		status->wake_match = BIT(1);
+	else if (GET_RX_STATUS_DESC_UNICAST_MATCH(pdesc))
+		status->wake_match = BIT(0);
+	else
+		status->wake_match = 0;
+	if (status->wake_match)
+		RT_TRACE(rtlpriv, COMP_RXDESC, DBG_LOUD,
+			 "GGGGGGGGGGGGGet Wakeup Packet!! WakeMatch=%d\n",
+			 status->wake_match);
+	rx_status->freq = hw->conf.chandef.chan->center_freq;
+	rx_status->band = hw->conf.chandef.chan->band;
+
+
+	hdr = (struct ieee80211_hdr *)(skb->data + status->rx_drvinfo_size +
+				       status->rx_bufshift);
+
+	if (status->crc)
+		rx_status->flag |= RX_FLAG_FAILED_FCS_CRC;
+
+	if (status->rx_is40Mhzpacket)
+		rx_status->flag |= RX_FLAG_40MHZ;
+
+	if (status->is_ht)
+		rx_status->flag |= RX_FLAG_HT;
+
+	rx_status->flag |= RX_FLAG_MACTIME_START;
+
+	/* hw will set status->decrypted true, if it finds the
+	 * frame is open data frame or mgmt frame.
+	 * So hw will not decryption robust managment frame
+	 * for IEEE80211w but still set status->decrypted
+	 * true, so here we should set it back to undecrypted
+	 * for IEEE80211w frame, and mac80211 sw will help
+	 * to decrypt it
+	 */
+	if (status->decrypted) {
+		if (!hdr) {
+			WARN_ON_ONCE(true);
+			pr_err("decrypted is true but hdr NULL in skb %p\n",
+			       rtl_get_hdr(skb));
+			return false;
+		}
+
+		if ((_ieee80211_is_robust_mgmt_frame(hdr)) &&
+		    (ieee80211_has_protected(hdr->frame_control)))
+			rx_status->flag &= ~RX_FLAG_DECRYPTED;
+		else
+			rx_status->flag |= RX_FLAG_DECRYPTED;
+	}
+
+	/* rate_idx: index of data rate into band's
+	 * supported rates or MCS index if HT rates
+	 * are use (RX_FLAG_HT)
+	 * Notice: this is diff with windows define
+	 */
+	rx_status->rate_idx = _rtl8723be_rate_mapping(hw, status->is_ht,
+						      status->rate);
+
+	rx_status->mactime = status->timestamp_low;
+	if (phystatus) {
+		p_drvinfo = (struct rx_fwinfo_8723be *)(skb->data +
+							status->rx_bufshift);
+
+		_rtl8723be_translate_rx_signal_stuff(hw, skb, status,
+						     pdesc, p_drvinfo);
+	}
+
+	/*rx_status->qual = status->signal; */
+	rx_status->signal = status->recvsignalpower + 10;
+	if (status->packet_report_type == TX_REPORT2) {
+		status->macid_valid_entry[0] =
+			 GET_RX_RPT2_DESC_MACID_VALID_1(pdesc);
+		status->macid_valid_entry[1] =
+			 GET_RX_RPT2_DESC_MACID_VALID_2(pdesc);
+	}
+	return true;
+}
+
+void rtl8723be_tx_fill_desc(struct ieee80211_hw *hw,
+			    struct ieee80211_hdr *hdr, u8 *pdesc_tx,
+			    struct ieee80211_tx_info *info,
+			    struct ieee80211_sta *sta, struct sk_buff *skb,
+			    u8 hw_queue, struct rtl_tcb_desc *ptcb_desc)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	struct rtl_hal *rtlhal = rtl_hal(rtlpriv);
+	u8 *pdesc = (u8 *)pdesc_tx;
+	u16 seq_number;
+	__le16 fc = hdr->frame_control;
+	unsigned int buf_len = 0;
+	unsigned int skb_len = skb->len;
+	u8 fw_qsel = _rtl8723be_map_hwqueue_to_fwqueue(skb, hw_queue);
+	bool firstseg = ((hdr->seq_ctrl &
+			  cpu_to_le16(IEEE80211_SCTL_FRAG)) == 0);
+	bool lastseg = ((hdr->frame_control &
+			 cpu_to_le16(IEEE80211_FCTL_MOREFRAGS)) == 0);
+	dma_addr_t mapping;
+	u8 bw_40 = 0;
+	u8 short_gi = 0;
+
+	if (mac->opmode == NL80211_IFTYPE_STATION) {
+		bw_40 = mac->bw_40;
+	} else if (mac->opmode == NL80211_IFTYPE_AP ||
+		mac->opmode == NL80211_IFTYPE_ADHOC) {
+		if (sta)
+			bw_40 = sta->ht_cap.cap &
+				IEEE80211_HT_CAP_SUP_WIDTH_20_40;
+	}
+	seq_number = (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_SEQ) >> 4;
+	rtl_get_tcb_desc(hw, info, sta, skb, ptcb_desc);
+	/* reserve 8 byte for AMPDU early mode */
+	if (rtlhal->earlymode_enable) {
+		skb_push(skb, EM_HDR_LEN);
+		memset(skb->data, 0, EM_HDR_LEN);
+	}
+	buf_len = skb->len;
+	mapping = pci_map_single(rtlpci->pdev, skb->data, skb->len,
+				 PCI_DMA_TODEVICE);
+	if (pci_dma_mapping_error(rtlpci->pdev, mapping)) {
+		RT_TRACE(rtlpriv, COMP_SEND, DBG_TRACE, "DMA mapping error");
+		return;
+	}
+	CLEAR_PCI_TX_DESC_CONTENT(pdesc, sizeof(struct tx_desc_8723be));
+	if (ieee80211_is_nullfunc(fc) || ieee80211_is_ctl(fc)) {
+		firstseg = true;
+		lastseg = true;
+	}
+	if (firstseg) {
+		if (rtlhal->earlymode_enable) {
+			SET_TX_DESC_PKT_OFFSET(pdesc, 1);
+			SET_TX_DESC_OFFSET(pdesc, USB_HWDESC_HEADER_LEN +
+					   EM_HDR_LEN);
+			if (ptcb_desc->empkt_num) {
+				RT_TRACE(rtlpriv, COMP_SEND, DBG_TRACE,
+					 "Insert 8 byte.pTcb->EMPktNum:%d\n",
+					  ptcb_desc->empkt_num);
+				_rtl8723be_insert_emcontent(ptcb_desc,
+							    (u8 *)(skb->data));
+			}
+		} else {
+			SET_TX_DESC_OFFSET(pdesc, USB_HWDESC_HEADER_LEN);
+		}
+
+		/* ptcb_desc->use_driver_rate = true; */
+		SET_TX_DESC_TX_RATE(pdesc, ptcb_desc->hw_rate);
+		if (ptcb_desc->hw_rate > DESC92C_RATEMCS0)
+			short_gi = (ptcb_desc->use_shortgi) ? 1 : 0;
+		else
+			short_gi = (ptcb_desc->use_shortpreamble) ? 1 : 0;
+
+		SET_TX_DESC_DATA_SHORTGI(pdesc, short_gi);
+
+		if (info->flags & IEEE80211_TX_CTL_AMPDU) {
+			SET_TX_DESC_AGG_ENABLE(pdesc, 1);
+			SET_TX_DESC_MAX_AGG_NUM(pdesc, 0x14);
+		}
+		SET_TX_DESC_SEQ(pdesc, seq_number);
+		SET_TX_DESC_RTS_ENABLE(pdesc, ((ptcb_desc->rts_enable &&
+						!ptcb_desc->cts_enable) ?
+						1 : 0));
+		SET_TX_DESC_HW_RTS_ENABLE(pdesc, 0);
+		SET_TX_DESC_CTS2SELF(pdesc, ((ptcb_desc->cts_enable) ?
+					      1 : 0));
+
+		SET_TX_DESC_RTS_RATE(pdesc, ptcb_desc->rts_rate);
+
+		SET_TX_DESC_RTS_SC(pdesc, ptcb_desc->rts_sc);
+		SET_TX_DESC_RTS_SHORT(pdesc,
+			((ptcb_desc->rts_rate <= DESC92C_RATE54M) ?
+			 (ptcb_desc->rts_use_shortpreamble ? 1 : 0) :
+			 (ptcb_desc->rts_use_shortgi ? 1 : 0)));
+
+		if (ptcb_desc->btx_enable_sw_calc_duration)
+			SET_TX_DESC_NAV_USE_HDR(pdesc, 1);
+
+		if (bw_40) {
+			if (ptcb_desc->packet_bw) {
+				SET_TX_DESC_DATA_BW(pdesc, 1);
+				SET_TX_DESC_TX_SUB_CARRIER(pdesc, 3);
+			} else {
+				SET_TX_DESC_DATA_BW(pdesc, 0);
+				SET_TX_DESC_TX_SUB_CARRIER(pdesc, mac->cur_40_prime_sc);
+			}
+		} else {
+			SET_TX_DESC_DATA_BW(pdesc, 0);
+			SET_TX_DESC_TX_SUB_CARRIER(pdesc, 0);
+		}
+
+		SET_TX_DESC_LINIP(pdesc, 0);
+		SET_TX_DESC_PKT_SIZE(pdesc, (u16) skb_len);
+		if (sta) {
+			u8 ampdu_density = sta->ht_cap.ampdu_density;
+			SET_TX_DESC_AMPDU_DENSITY(pdesc, ampdu_density);
+		}
+		if (info->control.hw_key) {
+			struct ieee80211_key_conf *keyconf =
+						info->control.hw_key;
+			switch (keyconf->cipher) {
+			case WLAN_CIPHER_SUITE_WEP40:
+			case WLAN_CIPHER_SUITE_WEP104:
+			case WLAN_CIPHER_SUITE_TKIP:
+				SET_TX_DESC_SEC_TYPE(pdesc, 0x1);
+				break;
+			case WLAN_CIPHER_SUITE_CCMP:
+				SET_TX_DESC_SEC_TYPE(pdesc, 0x3);
+				break;
+			default:
+				SET_TX_DESC_SEC_TYPE(pdesc, 0x0);
+				break;
+			}
+		}
+
+		SET_TX_DESC_QUEUE_SEL(pdesc, fw_qsel);
+		SET_TX_DESC_DATA_RATE_FB_LIMIT(pdesc, 0x1F);
+		SET_TX_DESC_RTS_RATE_FB_LIMIT(pdesc, 0xF);
+		SET_TX_DESC_DISABLE_FB(pdesc, ptcb_desc->disable_ratefallback ?
+				       1 : 0);
+		SET_TX_DESC_USE_RATE(pdesc, ptcb_desc->use_driver_rate ? 1 : 0);
+
+		if (ieee80211_is_data_qos(fc)) {
+			if (mac->rdg_en) {
+				RT_TRACE(rtlpriv, COMP_SEND, DBG_TRACE,
+					 "Enable RDG function.\n");
+				SET_TX_DESC_RDG_ENABLE(pdesc, 1);
+				SET_TX_DESC_HTC(pdesc, 1);
+			}
+		}
+	}
+
+	SET_TX_DESC_FIRST_SEG(pdesc, (firstseg ? 1 : 0));
+	SET_TX_DESC_LAST_SEG(pdesc, (lastseg ? 1 : 0));
+	SET_TX_DESC_TX_BUFFER_SIZE(pdesc, (u16) buf_len);
+	SET_TX_DESC_TX_BUFFER_ADDRESS(pdesc, mapping);
+	SET_TX_DESC_RATE_ID(pdesc, ptcb_desc->ratr_index);
+	SET_TX_DESC_MACID(pdesc, ptcb_desc->mac_id);
+
+	if (!ieee80211_is_data_qos(fc))  {
+		SET_TX_DESC_HWSEQ_EN(pdesc, 1);
+		SET_TX_DESC_HWSEQ_SEL(pdesc, 0);
+	}
+	SET_TX_DESC_MORE_FRAG(pdesc, (lastseg ? 0 : 1));
+	if (is_multicast_ether_addr(ieee80211_get_DA(hdr)) ||
+	    is_broadcast_ether_addr(ieee80211_get_DA(hdr))) {
+		SET_TX_DESC_BMC(pdesc, 1);
+	}
+	RT_TRACE(rtlpriv, COMP_SEND, DBG_TRACE, "\n");
+}
+
+void rtl8723be_tx_fill_cmddesc(struct ieee80211_hw *hw, u8 *pdesc,
+			       bool b_firstseg, bool b_lastseg,
+			       struct sk_buff *skb)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	u8 fw_queue = QSLT_BEACON;
+
+	dma_addr_t mapping = pci_map_single(rtlpci->pdev,
+					    skb->data, skb->len,
+					    PCI_DMA_TODEVICE);
+
+	if (pci_dma_mapping_error(rtlpci->pdev, mapping)) {
+		RT_TRACE(rtlpriv, COMP_SEND, DBG_TRACE,
+			 "DMA mapping error");
+		return;
+	}
+	CLEAR_PCI_TX_DESC_CONTENT(pdesc, TX_DESC_SIZE);
+
+	SET_TX_DESC_OFFSET(pdesc, USB_HWDESC_HEADER_LEN);
+
+	SET_TX_DESC_TX_RATE(pdesc, DESC92C_RATE1M);
+
+	SET_TX_DESC_SEQ(pdesc, 0);
+
+	SET_TX_DESC_LINIP(pdesc, 0);
+
+	SET_TX_DESC_QUEUE_SEL(pdesc, fw_queue);
+
+	SET_TX_DESC_FIRST_SEG(pdesc, 1);
+	SET_TX_DESC_LAST_SEG(pdesc, 1);
+
+	SET_TX_DESC_TX_BUFFER_SIZE(pdesc, (u16)(skb->len));
+
+	SET_TX_DESC_TX_BUFFER_ADDRESS(pdesc, mapping);
+
+	SET_TX_DESC_RATE_ID(pdesc, 0);
+	SET_TX_DESC_MACID(pdesc, 0);
+
+	SET_TX_DESC_OWN(pdesc, 1);
+
+	SET_TX_DESC_PKT_SIZE((u8 *)pdesc, (u16)(skb->len));
+
+	SET_TX_DESC_FIRST_SEG(pdesc, 1);
+	SET_TX_DESC_LAST_SEG(pdesc, 1);
+
+	SET_TX_DESC_USE_RATE(pdesc, 1);
+}
+
+void rtl8723be_set_desc(u8 *pdesc, bool istx, u8 desc_name, u8 *val)
+{
+	if (istx) {
+		switch (desc_name) {
+		case HW_DESC_OWN:
+			SET_TX_DESC_OWN(pdesc, 1);
+			break;
+		case HW_DESC_TX_NEXTDESC_ADDR:
+			SET_TX_DESC_NEXT_DESC_ADDRESS(pdesc, *(u32 *)val);
+			break;
+		default:
+			RT_ASSERT(false, "ERR txdesc :%d not process\n",
+				  desc_name);
+			break;
+		}
+	} else {
+		switch (desc_name) {
+		case HW_DESC_RXOWN:
+			SET_RX_DESC_OWN(pdesc, 1);
+			break;
+		case HW_DESC_RXBUFF_ADDR:
+			SET_RX_DESC_BUFF_ADDR(pdesc, *(u32 *)val);
+			break;
+		case HW_DESC_RXPKT_LEN:
+			SET_RX_DESC_PKT_LEN(pdesc, *(u32 *)val);
+			break;
+		case HW_DESC_RXERO:
+			SET_RX_DESC_EOR(pdesc, 1);
+			break;
+		default:
+			RT_ASSERT(false, "ERR rxdesc :%d not process\n",
+				  desc_name);
+			break;
+		}
+	}
+}
+
+u32 rtl8723be_get_desc(u8 *pdesc, bool istx, u8 desc_name)
+{
+	u32 ret = 0;
+
+	if (istx) {
+		switch (desc_name) {
+		case HW_DESC_OWN:
+			ret = GET_TX_DESC_OWN(pdesc);
+			break;
+		case HW_DESC_TXBUFF_ADDR:
+			ret = GET_TX_DESC_TX_BUFFER_ADDRESS(pdesc);
+			break;
+		default:
+			RT_ASSERT(false, "ERR txdesc :%d not process\n",
+				  desc_name);
+			break;
+		}
+	} else {
+		switch (desc_name) {
+		case HW_DESC_OWN:
+			ret = GET_RX_DESC_OWN(pdesc);
+			break;
+		case HW_DESC_RXPKT_LEN:
+			ret = GET_RX_DESC_PKT_LEN(pdesc);
+			break;
+		default:
+			RT_ASSERT(false, "ERR rxdesc :%d not process\n",
+				  desc_name);
+			break;
+		}
+	}
+	return ret;
+}
+
+bool rtl8723be_is_tx_desc_closed(struct ieee80211_hw *hw,
+				 u8 hw_queue, u16 index)
+{
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	struct rtl8192_tx_ring *ring = &rtlpci->tx_ring[hw_queue];
+	u8 *entry = (u8 *)(&ring->desc[ring->idx]);
+	u8 own = (u8) rtl8723be_get_desc(entry, true, HW_DESC_OWN);
+
+	/*beacon packet will only use the first
+	 *descriptor by default, and the own may not
+	 *be cleared by the hardware
+	 */
+	if (own)
+		return false;
+	else
+		return true;
+}
+
+void rtl8723be_tx_polling(struct ieee80211_hw *hw, u8 hw_queue)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	if (hw_queue == BEACON_QUEUE) {
+		rtl_write_word(rtlpriv, REG_PCIE_CTRL_REG, BIT(4));
+	} else {
+		rtl_write_word(rtlpriv, REG_PCIE_CTRL_REG,
+			       BIT(0) << (hw_queue));
+	}
+}
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/trx.h b/drivers/net/wireless/rtlwifi/rtl8723be/trx.h
new file mode 100644
index 000000000000..d375cf01c3dc
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/trx.h
@@ -0,0 +1,616 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2014  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __RTL8723BE_TRX_H__
+#define __RTL8723BE_TRX_H__
+
+#define TX_DESC_SIZE				40
+#define TX_DESC_AGGR_SUBFRAME_SIZE		32
+
+#define RX_DESC_SIZE				32
+#define RX_DRV_INFO_SIZE_UNIT			8
+
+#define	TX_DESC_NEXT_DESC_OFFSET		40
+#define USB_HWDESC_HEADER_LEN			40
+#define CRCLENGTH				4
+
+#define SET_TX_DESC_PKT_SIZE(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc, 0, 16, __val)
+#define SET_TX_DESC_OFFSET(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc, 16, 8, __val)
+#define SET_TX_DESC_BMC(__pdesc, __val)			\
+	SET_BITS_TO_LE_4BYTE(__pdesc, 24, 1, __val)
+#define SET_TX_DESC_HTC(__pdesc, __val)			\
+	SET_BITS_TO_LE_4BYTE(__pdesc, 25, 1, __val)
+#define SET_TX_DESC_LAST_SEG(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc, 26, 1, __val)
+#define SET_TX_DESC_FIRST_SEG(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc, 27, 1, __val)
+#define SET_TX_DESC_LINIP(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc, 28, 1, __val)
+#define SET_TX_DESC_NO_ACM(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc, 29, 1, __val)
+#define SET_TX_DESC_GF(__pdesc, __val)			\
+	SET_BITS_TO_LE_4BYTE(__pdesc, 30, 1, __val)
+#define SET_TX_DESC_OWN(__pdesc, __val)			\
+	SET_BITS_TO_LE_4BYTE(__pdesc, 31, 1, __val)
+
+#define GET_TX_DESC_PKT_SIZE(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc, 0, 16)
+#define GET_TX_DESC_OFFSET(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc, 16, 8)
+#define GET_TX_DESC_BMC(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc, 24, 1)
+#define GET_TX_DESC_HTC(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc, 25, 1)
+#define GET_TX_DESC_LAST_SEG(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc, 26, 1)
+#define GET_TX_DESC_FIRST_SEG(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc, 27, 1)
+#define GET_TX_DESC_LINIP(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc, 28, 1)
+#define GET_TX_DESC_NO_ACM(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc, 29, 1)
+#define GET_TX_DESC_GF(__pdesc)				\
+	LE_BITS_TO_4BYTE(__pdesc, 30, 1)
+#define GET_TX_DESC_OWN(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc, 31, 1)
+
+#define SET_TX_DESC_MACID(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+4, 0, 7, __val)
+#define SET_TX_DESC_QUEUE_SEL(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+4, 8, 5, __val)
+#define SET_TX_DESC_RDG_NAV_EXT(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+4, 13, 1, __val)
+#define SET_TX_DESC_LSIG_TXOP_EN(__pdesc, __val)	\
+	SET_BITS_TO_LE_4BYTE(__pdesc+4, 14, 1, __val)
+#define SET_TX_DESC_PIFS(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+4, 15, 1, __val)
+#define SET_TX_DESC_RATE_ID(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+4, 16, 5, __val)
+#define SET_TX_DESC_EN_DESC_ID(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+4, 21, 1, __val)
+#define SET_TX_DESC_SEC_TYPE(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+4, 22, 2, __val)
+#define SET_TX_DESC_PKT_OFFSET(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+4, 24, 5, __val)
+
+
+#define SET_TX_DESC_PAID(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+8, 0, 9, __val)
+#define SET_TX_DESC_CCA_RTS(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+8, 10, 2, __val)
+#define SET_TX_DESC_AGG_ENABLE(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+8, 12, 1, __val)
+#define SET_TX_DESC_RDG_ENABLE(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+8, 13, 1, __val)
+#define SET_TX_DESC_BAR_RTY_TH(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+8, 14, 2, __val)
+#define SET_TX_DESC_AGG_BREAK(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+8, 16, 1, __val)
+#define SET_TX_DESC_MORE_FRAG(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+8, 17, 1, __val)
+#define SET_TX_DESC_RAW(__pdesc, __val)			\
+	SET_BITS_TO_LE_4BYTE(__pdesc+8, 18, 1, __val)
+#define SET_TX_DESC_SPE_RPT(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+8, 19, 1, __val)
+#define SET_TX_DESC_AMPDU_DENSITY(__pdesc, __val)	\
+	SET_BITS_TO_LE_4BYTE(__pdesc+8, 20, 3, __val)
+#define SET_TX_DESC_BT_INT(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+8, 23, 1, __val)
+#define SET_TX_DESC_GID(__pdesc, __val)			\
+	SET_BITS_TO_LE_4BYTE(__pdesc+8, 24, 6, __val)
+
+
+#define SET_TX_DESC_WHEADER_LEN(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+12, 0, 4, __val)
+#define SET_TX_DESC_CHK_EN(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+12, 4, 1, __val)
+#define SET_TX_DESC_EARLY_MODE(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+12, 5, 1, __val)
+#define SET_TX_DESC_HWSEQ_SEL(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+12, 6, 2, __val)
+#define SET_TX_DESC_USE_RATE(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+12, 8, 1, __val)
+#define SET_TX_DESC_DISABLE_RTS_FB(__pdesc, __val)	\
+	SET_BITS_TO_LE_4BYTE(__pdesc+12, 9, 1, __val)
+#define SET_TX_DESC_DISABLE_FB(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+12, 10, 1, __val)
+#define SET_TX_DESC_CTS2SELF(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+12, 11, 1, __val)
+#define SET_TX_DESC_RTS_ENABLE(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+12, 12, 1, __val)
+#define SET_TX_DESC_HW_RTS_ENABLE(__pdesc, __val)	\
+	SET_BITS_TO_LE_4BYTE(__pdesc+12, 13, 1, __val)
+#define SET_TX_DESC_NAV_USE_HDR(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+12, 15, 1, __val)
+#define SET_TX_DESC_USE_MAX_LEN(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+12, 16, 1, __val)
+#define SET_TX_DESC_MAX_AGG_NUM(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+12, 17, 5, __val)
+#define SET_TX_DESC_NDPA(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+12, 22, 2, __val)
+#define SET_TX_DESC_AMPDU_MAX_TIME(__pdesc, __val)	\
+	SET_BITS_TO_LE_4BYTE(__pdesc+12, 24, 8, __val)
+
+
+#define SET_TX_DESC_TX_RATE(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+16, 0, 7, __val)
+#define SET_TX_DESC_DATA_RATE_FB_LIMIT(__pdesc, __val)	\
+	SET_BITS_TO_LE_4BYTE(__pdesc+16, 8, 5, __val)
+#define SET_TX_DESC_RTS_RATE_FB_LIMIT(__pdesc, __val)	\
+	SET_BITS_TO_LE_4BYTE(__pdesc+16, 13, 4, __val)
+#define SET_TX_DESC_RETRY_LIMIT_ENABLE(__pdesc, __val)	\
+	SET_BITS_TO_LE_4BYTE(__pdesc+16, 17, 1, __val)
+#define SET_TX_DESC_DATA_RETRY_LIMIT(__pdesc, __val)	\
+	SET_BITS_TO_LE_4BYTE(__pdesc+16, 18, 6, __val)
+#define SET_TX_DESC_RTS_RATE(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+16, 24, 5, __val)
+
+
+#define SET_TX_DESC_TX_SUB_CARRIER(__pdesc, __val)	\
+	SET_BITS_TO_LE_4BYTE(__pdesc+20, 0, 4, __val)
+#define SET_TX_DESC_DATA_SHORTGI(__pdesc, __val)	\
+	SET_BITS_TO_LE_4BYTE(__pdesc+20, 4, 1, __val)
+#define SET_TX_DESC_DATA_BW(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+20, 5, 2, __val)
+#define SET_TX_DESC_DATA_LDPC(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+20, 7, 1, __val)
+#define SET_TX_DESC_DATA_STBC(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+20, 8, 2, __val)
+#define SET_TX_DESC_CTROL_STBC(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+20, 10, 2, __val)
+#define SET_TX_DESC_RTS_SHORT(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+20, 12, 1, __val)
+#define SET_TX_DESC_RTS_SC(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+20, 13, 4, __val)
+
+
+#define SET_TX_DESC_TX_BUFFER_SIZE(__pdesc, __val)	\
+	SET_BITS_TO_LE_4BYTE(__pdesc+28, 0, 16, __val)
+
+#define GET_TX_DESC_TX_BUFFER_SIZE(__pdesc)		\
+	LE_BITS_TO_4BYTE(__pdesc+28, 0, 16)
+
+#define SET_TX_DESC_HWSEQ_EN(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+32, 15, 1, __val)
+
+#define SET_TX_DESC_SEQ(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+36, 12, 12, __val)
+
+#define SET_TX_DESC_TX_BUFFER_ADDRESS(__pdesc, __val)	\
+	SET_BITS_TO_LE_4BYTE(__pdesc+40, 0, 32, __val)
+
+#define GET_TX_DESC_TX_BUFFER_ADDRESS(__pdesc)		\
+	LE_BITS_TO_4BYTE(__pdesc+40, 0, 32)
+
+
+#define SET_TX_DESC_NEXT_DESC_ADDRESS(__pdesc, __val)	\
+	SET_BITS_TO_LE_4BYTE(__pdesc+48, 0, 32, __val)
+
+#define GET_TX_DESC_NEXT_DESC_ADDRESS(__pdesc)		\
+	LE_BITS_TO_4BYTE(__pdesc+48, 0, 32)
+
+#define GET_RX_DESC_PKT_LEN(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc, 0, 14)
+#define GET_RX_DESC_CRC32(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc, 14, 1)
+#define GET_RX_DESC_ICV(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc, 15, 1)
+#define GET_RX_DESC_DRV_INFO_SIZE(__pdesc)		\
+	LE_BITS_TO_4BYTE(__pdesc, 16, 4)
+#define GET_RX_DESC_SECURITY(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc, 20, 3)
+#define GET_RX_DESC_QOS(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc, 23, 1)
+#define GET_RX_DESC_SHIFT(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc, 24, 2)
+#define GET_RX_DESC_PHYST(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc, 26, 1)
+#define GET_RX_DESC_SWDEC(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc, 27, 1)
+#define GET_RX_DESC_LS(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc, 28, 1)
+#define GET_RX_DESC_FS(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc, 29, 1)
+#define GET_RX_DESC_EOR(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc, 30, 1)
+#define GET_RX_DESC_OWN(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc, 31, 1)
+
+#define SET_RX_DESC_PKT_LEN(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc, 0, 14, __val)
+#define SET_RX_DESC_EOR(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc, 30, 1, __val)
+#define SET_RX_DESC_OWN(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc, 31, 1, __val)
+
+#define GET_RX_DESC_MACID(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+4, 0, 7)
+#define GET_RX_DESC_TID(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+4, 8, 4)
+#define GET_RX_DESC_AMSDU(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+4, 13, 1)
+#define GET_RX_STATUS_DESC_RXID_MATCH(__pdesc)		\
+	LE_BITS_TO_4BYTE(__pdesc+4, 14, 1)
+#define GET_RX_DESC_PAGGR(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+4, 15, 1)
+#define GET_RX_DESC_A1_FIT(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+4, 16, 4)
+#define GET_RX_DESC_CHKERR(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+4, 20, 1)
+#define GET_RX_DESC_IPVER(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+4, 21, 1)
+#define GET_RX_STATUS_DESC_IS_TCPUDP(__pdesc)		\
+	LE_BITS_TO_4BYTE(__pdesc+4, 22, 1)
+#define GET_RX_STATUS_DESC_CHK_VLD(__pdesc)		\
+	LE_BITS_TO_4BYTE(__pdesc+4, 23, 1)
+#define GET_RX_DESC_PAM(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+4, 24, 1)
+#define GET_RX_DESC_PWR(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+4, 25, 1)
+#define GET_RX_DESC_MD(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+4, 26, 1)
+#define GET_RX_DESC_MF(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+4, 27, 1)
+#define GET_RX_DESC_TYPE(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+4, 28, 2)
+#define GET_RX_DESC_MC(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+4, 30, 1)
+#define GET_RX_DESC_BC(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+4, 31, 1)
+
+
+#define GET_RX_DESC_SEQ(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+8, 0, 12)
+#define GET_RX_DESC_FRAG(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+8, 12, 4)
+#define GET_RX_STATUS_DESC_RX_IS_QOS(__pdesc)		\
+	LE_BITS_TO_4BYTE(__pdesc+8, 16, 1)
+#define GET_RX_STATUS_DESC_WLANHD_IV_LEN(__pdesc)	\
+	LE_BITS_TO_4BYTE(__pdesc+8, 18, 6)
+#define GET_RX_STATUS_DESC_RPT_SEL(__pdesc)		\
+	LE_BITS_TO_4BYTE(__pdesc+8, 28, 1)
+
+
+#define GET_RX_DESC_RXMCS(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+12, 0, 7)
+#define GET_RX_DESC_RXHT(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+12, 6, 1)
+#define GET_RX_STATUS_DESC_RX_GF(__pdesc)		\
+	LE_BITS_TO_4BYTE(__pdesc+12, 7, 1)
+#define GET_RX_DESC_HTC(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+12, 10, 1)
+#define GET_RX_STATUS_DESC_EOSP(__pdesc)		\
+	LE_BITS_TO_4BYTE(__pdesc+12, 11, 1)
+#define GET_RX_STATUS_DESC_BSSID_FIT(__pdesc)		\
+	LE_BITS_TO_4BYTE(__pdesc+12, 12, 2)
+
+#define GET_RX_STATUS_DESC_PATTERN_MATCH(__pdesc)	\
+	LE_BITS_TO_4BYTE(__pdesc+12, 29, 1)
+#define GET_RX_STATUS_DESC_UNICAST_MATCH(__pdesc)	\
+	LE_BITS_TO_4BYTE(__pdesc+12, 30, 1)
+#define GET_RX_STATUS_DESC_MAGIC_MATCH(__pdesc)		\
+	LE_BITS_TO_4BYTE(__pdesc+12, 31, 1)
+
+#define GET_RX_DESC_SPLCP(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+16, 0, 1)
+#define GET_RX_STATUS_DESC_LDPC(__pdesc)		\
+	LE_BITS_TO_4BYTE(__pdesc+16, 1, 1)
+#define GET_RX_STATUS_DESC_STBC(__pdesc)		\
+	LE_BITS_TO_4BYTE(__pdesc+16, 2, 1)
+#define GET_RX_DESC_BW(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+16, 4, 2)
+
+#define GET_RX_DESC_TSFL(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+20, 0, 32)
+
+#define GET_RX_DESC_BUFF_ADDR(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+24, 0, 32)
+#define GET_RX_DESC_BUFF_ADDR64(__pdesc)		\
+	LE_BITS_TO_4BYTE(__pdesc+28, 0, 32)
+
+#define SET_RX_DESC_BUFF_ADDR(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+24, 0, 32, __val)
+#define SET_RX_DESC_BUFF_ADDR64(__pdesc, __val)	\
+	SET_BITS_TO_LE_4BYTE(__pdesc+28, 0, 32, __val)
+
+
+/* TX report 2 format in Rx desc*/
+
+#define GET_RX_RPT2_DESC_PKT_LEN(__rxstatusdesc)	\
+	LE_BITS_TO_4BYTE(__rxstatusdesc, 0, 9)
+#define GET_RX_RPT2_DESC_MACID_VALID_1(__rxstatusdesc)	\
+	LE_BITS_TO_4BYTE(__rxstatusdesc+16, 0, 32)
+#define GET_RX_RPT2_DESC_MACID_VALID_2(__rxstatusdesc)	\
+	LE_BITS_TO_4BYTE(__rxstatusdesc+20, 0, 32)
+
+#define SET_EARLYMODE_PKTNUM(__paddr, __value)		\
+	SET_BITS_TO_LE_4BYTE(__paddr, 0, 4, __value)
+#define SET_EARLYMODE_LEN0(__paddr, __value)		\
+	SET_BITS_TO_LE_4BYTE(__paddr, 4, 12, __value)
+#define SET_EARLYMODE_LEN1(__paddr, __value)		\
+	SET_BITS_TO_LE_4BYTE(__paddr, 16, 12, __value)
+#define SET_EARLYMODE_LEN2_1(__paddr, __value)		\
+	SET_BITS_TO_LE_4BYTE(__paddr, 28, 4, __value)
+#define SET_EARLYMODE_LEN2_2(__paddr, __value)		\
+	SET_BITS_TO_LE_4BYTE(__paddr+4, 0, 8, __value)
+#define SET_EARLYMODE_LEN3(__paddr, __value)		\
+	SET_BITS_TO_LE_4BYTE(__paddr+4, 8, 12, __value)
+#define SET_EARLYMODE_LEN4(__paddr, __value)		\
+	SET_BITS_TO_LE_4BYTE(__paddr+4, 20, 12, __value)
+
+#define CLEAR_PCI_TX_DESC_CONTENT(__pdesc, _size)		\
+do {								\
+	if (_size > TX_DESC_NEXT_DESC_OFFSET)			\
+		memset(__pdesc, 0, TX_DESC_NEXT_DESC_OFFSET);	\
+	else							\
+		memset(__pdesc, 0, _size);			\
+} while (0)
+
+struct phy_rx_agc_info_t {
+	#ifdef __LITTLE_ENDIAN
+		u8 gain:7, trsw:1;
+	#else
+		u8 trsw:1, gain:7;
+	#endif
+};
+struct phy_status_rpt {
+	struct phy_rx_agc_info_t path_agc[2];
+	u8 ch_corr[2];
+	u8 cck_sig_qual_ofdm_pwdb_all;
+	u8 cck_agc_rpt_ofdm_cfosho_a;
+	u8 cck_rpt_b_ofdm_cfosho_b;
+	u8 rsvd_1;/* ch_corr_msb; */
+	u8 noise_power_db_msb;
+	char path_cfotail[2];
+	u8 pcts_mask[2];
+	char stream_rxevm[2];
+	u8 path_rxsnr[2];
+	u8 noise_power_db_lsb;
+	u8 rsvd_2[3];
+	u8 stream_csi[2];
+	u8 stream_target_csi[2];
+	u8 sig_evm;
+	u8 rsvd_3;
+#ifdef __LITTLE_ENDIAN
+	u8 antsel_rx_keep_2:1;	/*ex_intf_flg:1;*/
+	u8 sgi_en:1;
+	u8 rxsc:2;
+	u8 idle_long:1;
+	u8 r_ant_train_en:1;
+	u8 ant_sel_b:1;
+	u8 ant_sel:1;
+#else	/* _BIG_ENDIAN_	*/
+	u8 ant_sel:1;
+	u8 ant_sel_b:1;
+	u8 r_ant_train_en:1;
+	u8 idle_long:1;
+	u8 rxsc:2;
+	u8 sgi_en:1;
+	u8 antsel_rx_keep_2:1;	/*ex_intf_flg:1;*/
+#endif
+} __packed;
+
+struct rx_fwinfo_8723be {
+	u8 gain_trsw[4];
+	u8 pwdb_all;
+	u8 cfosho[4];
+	u8 cfotail[4];
+	char rxevm[2];
+	char rxsnr[4];
+	u8 pdsnr[2];
+	u8 csi_current[2];
+	u8 csi_target[2];
+	u8 sigevm;
+	u8 max_ex_pwr;
+	u8 ex_intf_flag:1;
+	u8 sgi_en:1;
+	u8 rxsc:2;
+	u8 reserve:4;
+} __packed;
+
+struct tx_desc_8723be {
+	u32 pktsize:16;
+	u32 offset:8;
+	u32 bmc:1;
+	u32 htc:1;
+	u32 lastseg:1;
+	u32 firstseg:1;
+	u32 linip:1;
+	u32 noacm:1;
+	u32 gf:1;
+	u32 own:1;
+
+	u32 macid:6;
+	u32 rsvd0:2;
+	u32 queuesel:5;
+	u32 rd_nav_ext:1;
+	u32 lsig_txop_en:1;
+	u32 pifs:1;
+	u32 rateid:4;
+	u32 nav_usehdr:1;
+	u32 en_descid:1;
+	u32 sectype:2;
+	u32 pktoffset:8;
+
+	u32 rts_rc:6;
+	u32 data_rc:6;
+	u32 agg_en:1;
+	u32 rdg_en:1;
+	u32 bar_retryht:2;
+	u32 agg_break:1;
+	u32 morefrag:1;
+	u32 raw:1;
+	u32 ccx:1;
+	u32 ampdudensity:3;
+	u32 bt_int:1;
+	u32 ant_sela:1;
+	u32 ant_selb:1;
+	u32 txant_cck:2;
+	u32 txant_l:2;
+	u32 txant_ht:2;
+
+	u32 nextheadpage:8;
+	u32 tailpage:8;
+	u32 seq:12;
+	u32 cpu_handle:1;
+	u32 tag1:1;
+	u32 trigger_int:1;
+	u32 hwseq_en:1;
+
+	u32 rtsrate:5;
+	u32 apdcfe:1;
+	u32 qos:1;
+	u32 hwseq_ssn:1;
+	u32 userrate:1;
+	u32 dis_rtsfb:1;
+	u32 dis_datafb:1;
+	u32 cts2self:1;
+	u32 rts_en:1;
+	u32 hwrts_en:1;
+	u32 portid:1;
+	u32 pwr_status:3;
+	u32 waitdcts:1;
+	u32 cts2ap_en:1;
+	u32 txsc:2;
+	u32 stbc:2;
+	u32 txshort:1;
+	u32 txbw:1;
+	u32 rtsshort:1;
+	u32 rtsbw:1;
+	u32 rtssc:2;
+	u32 rtsstbc:2;
+
+	u32 txrate:6;
+	u32 shortgi:1;
+	u32 ccxt:1;
+	u32 txrate_fb_lmt:5;
+	u32 rtsrate_fb_lmt:4;
+	u32 retrylmt_en:1;
+	u32 txretrylmt:6;
+	u32 usb_txaggnum:8;
+
+	u32 txagca:5;
+	u32 txagcb:5;
+	u32 usemaxlen:1;
+	u32 maxaggnum:5;
+	u32 mcsg1maxlen:4;
+	u32 mcsg2maxlen:4;
+	u32 mcsg3maxlen:4;
+	u32 mcs7sgimaxlen:4;
+
+	u32 txbuffersize:16;
+	u32 sw_offset30:8;
+	u32 sw_offset31:4;
+	u32 rsvd1:1;
+	u32 antsel_c:1;
+	u32 null_0:1;
+	u32 null_1:1;
+
+	u32 txbuffaddr;
+	u32 txbufferaddr64;
+	u32 nextdescaddress;
+	u32 nextdescaddress64;
+
+	u32 reserve_pass_pcie_mm_limit[4];
+} __packed;
+
+struct rx_desc_8723be {
+	u32 length:14;
+	u32 crc32:1;
+	u32 icverror:1;
+	u32 drv_infosize:4;
+	u32 security:3;
+	u32 qos:1;
+	u32 shift:2;
+	u32 phystatus:1;
+	u32 swdec:1;
+	u32 lastseg:1;
+	u32 firstseg:1;
+	u32 eor:1;
+	u32 own:1;
+
+	u32 macid:6;
+	u32 tid:4;
+	u32 hwrsvd:5;
+	u32 paggr:1;
+	u32 faggr:1;
+	u32 a1_fit:4;
+	u32 a2_fit:4;
+	u32 pam:1;
+	u32 pwr:1;
+	u32 moredata:1;
+	u32 morefrag:1;
+	u32 type:2;
+	u32 mc:1;
+	u32 bc:1;
+
+	u32 seq:12;
+	u32 frag:4;
+	u32 nextpktlen:14;
+	u32 nextind:1;
+	u32 rsvd:1;
+
+	u32 rxmcs:6;
+	u32 rxht:1;
+	u32 amsdu:1;
+	u32 splcp:1;
+	u32 bandwidth:1;
+	u32 htc:1;
+	u32 tcpchk_rpt:1;
+	u32 ipcchk_rpt:1;
+	u32 tcpchk_valid:1;
+	u32 hwpcerr:1;
+	u32 hwpcind:1;
+	u32 iv0:16;
+
+	u32 iv1;
+
+	u32 tsfl;
+
+	u32 bufferaddress;
+	u32 bufferaddress64;
+
+} __packed;
+
+void rtl8723be_tx_fill_desc(struct ieee80211_hw *hw,
+			    struct ieee80211_hdr *hdr, u8 *pdesc_tx,
+			    struct ieee80211_tx_info *info,
+			    struct ieee80211_sta *sta, struct sk_buff *skb,
+			    u8 hw_queue, struct rtl_tcb_desc *ptcb_desc);
+bool rtl8723be_rx_query_desc(struct ieee80211_hw *hw,
+			     struct rtl_stats *status,
+			     struct ieee80211_rx_status *rx_status,
+			     u8 *pdesc, struct sk_buff *skb);
+void rtl8723be_set_desc(u8 *pdesc, bool istx, u8 desc_name, u8 *val);
+u32 rtl8723be_get_desc(u8 *pdesc, bool istx, u8 desc_name);
+bool rtl8723be_is_tx_desc_closed(struct ieee80211_hw *hw,
+				 u8 hw_queue, u16 index);
+void rtl8723be_tx_polling(struct ieee80211_hw *hw, u8 hw_queue);
+void rtl8723be_tx_fill_cmddesc(struct ieee80211_hw *hw, u8 *pdesc,
+			       bool b_firstseg, bool b_lastseg,
+			       struct sk_buff *skb);
+#endif
-- 
cgit v1.2.2


From 76be3434f4150b282470bf71cd4aa0c82b29d603 Mon Sep 17 00:00:00 2001
From: Surendra Patil <surendra.tux@gmail.com>
Date: Tue, 4 Mar 2014 00:18:52 -0800
Subject: Drivers:net:wireless:ti:wl1251: Fixed Sparse invalid assignment
 warning

Sparse warns about invalid assignment in
drivers/net/wireless/ti/wl1251/cmd.c:451:42: warning: invalid assignment: |=
drivers/net/wireless/ti/wl1251/cmd.c:451:42:    left side has type restricted __le16
drivers/net/wireless/ti/wl1251/cmd.c:451:42:    right side has type int
Hence type converted right side to __le16.

Signed-off-by: Surendra Patil <surendra.tux@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ti/wl1251/cmd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ti/wl1251/cmd.c b/drivers/net/wireless/ti/wl1251/cmd.c
index 223649bcaa5a..bf1fa18b9786 100644
--- a/drivers/net/wireless/ti/wl1251/cmd.c
+++ b/drivers/net/wireless/ti/wl1251/cmd.c
@@ -448,7 +448,7 @@ int wl1251_cmd_scan(struct wl1251 *wl, u8 *ssid, size_t ssid_len,
 	 * Note: This bug may be caused by the fw's DTIM handling.
 	 */
 	if (is_zero_ether_addr(wl->bssid))
-		cmd->params.scan_options |= WL1251_SCAN_OPT_PRIORITY_HIGH;
+		cmd->params.scan_options |= cpu_to_le16(WL1251_SCAN_OPT_PRIORITY_HIGH);
 	cmd->params.num_channels = n_channels;
 	cmd->params.num_probe_requests = n_probes;
 	cmd->params.tx_rate = cpu_to_le16(1 << 1); /* 2 Mbps */
-- 
cgit v1.2.2


From 997bc71a3601b25dbbe3ac75b77b4f49582c0ae5 Mon Sep 17 00:00:00 2001
From: Stanislaw Gruszka <sgruszka@redhat.com>
Date: Tue, 4 Mar 2014 14:18:42 +0100
Subject: iwl4965: disable 8K A-MSDU by default

iwlegacy version of this iwlwifi patch:

commit aed7d9ac1836defe033b561f4306e39014ac56fd
Author: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date:   Wed Feb 20 11:33:00 2013 +0200

    iwlwifi: disable 8K A-MSDU by default

    Supporting 8K A-MSDU means that we need to allocate order 1
    pages for every Rx packet. Even when there is no traffic.
    This adds stress on the memory manager. The handling of
    compound pages is also less trivial for the memory manager
    and not using them will make the allocation code run faster
    although I didn't really measure.
    Eric also pointed out that having huge buffers with little
    data in them is not very nice towards the TCP stack since
    the truesize of the skb is huge. This doesn't allow TCP
    to have a big Rx window.
    See https://patchwork.kernel.org/patch/2167711/ for details.

    Note that very few vendors will actually send A-MSDU.
    Disable this feature by default.

    Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
    Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlegacy/4965-mac.c | 3 +--
 drivers/net/wireless/iwlegacy/common.h   | 2 +-
 2 files changed, 2 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlegacy/4965-mac.c b/drivers/net/wireless/iwlegacy/4965-mac.c
index 50673f7e30bc..888ad5c74639 100644
--- a/drivers/net/wireless/iwlegacy/4965-mac.c
+++ b/drivers/net/wireless/iwlegacy/4965-mac.c
@@ -92,7 +92,6 @@ il4965_check_abort_status(struct il_priv *il, u8 frame_count, u32 status)
  * EEPROM
  */
 struct il_mod_params il4965_mod_params = {
-	.amsdu_size_8K = 1,
 	.restart_fw = 1,
 	/* the rest are 0 by default */
 };
@@ -6866,6 +6865,6 @@ module_param_named(11n_disable, il4965_mod_params.disable_11n, int, S_IRUGO);
 MODULE_PARM_DESC(11n_disable, "disable 11n functionality");
 module_param_named(amsdu_size_8K, il4965_mod_params.amsdu_size_8K, int,
 		   S_IRUGO);
-MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size");
+MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size (default 0 [disabled])");
 module_param_named(fw_restart, il4965_mod_params.restart_fw, int, S_IRUGO);
 MODULE_PARM_DESC(fw_restart, "restart firmware in case of error");
diff --git a/drivers/net/wireless/iwlegacy/common.h b/drivers/net/wireless/iwlegacy/common.h
index 13145ad2c0db..dfb13c70efe8 100644
--- a/drivers/net/wireless/iwlegacy/common.h
+++ b/drivers/net/wireless/iwlegacy/common.h
@@ -1598,7 +1598,7 @@ struct il_mod_params {
 	int disable_hw_scan;	/* def: 0 = use h/w scan */
 	int num_of_queues;	/* def: HW dependent */
 	int disable_11n;	/* def: 0 = 11n capabilities enabled */
-	int amsdu_size_8K;	/* def: 1 = enable 8K amsdu size */
+	int amsdu_size_8K;	/* def: 0 = disable 8K amsdu size */
 	int antenna;		/* def: 0 = both antennas (use diversity) */
 	int restart_fw;		/* def: 1 = restart firmware */
 };
-- 
cgit v1.2.2


From e50287be7c007a10e6e2e3332e52466faf4b6a04 Mon Sep 17 00:00:00 2001
From: Sathya Perla <sathya.perla@emulex.com>
Date: Tue, 4 Mar 2014 12:14:38 +0530
Subject: be2net: dma_sync each RX frag before passing it to the stack

The driver currently maps a page for DMA, divides the page into multiple
frags and posts them to the HW. It un-maps the page after data is received
on all the frags of the page. This scheme doesn't work when bounce buffers
are used for DMA (swiotlb=force kernel param).

This patch fixes this problem by calling dma_sync_single_for_cpu() for each
frag (excepting the last one) so that the data is copied from the bounce
buffers. The page is un-mapped only when DMA finishes on the last frag of
the page.
(Thanks Ben H. for suggesting the dma_sync API!)

This patch also renames the "last_page_user" field of be_rx_page_info{}
struct to "last_frag" to improve readability of the fixed code.

Reported-by: Li Fengmao <li.fengmao@zte.com.cn>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/emulex/benet/be.h      |  3 ++-
 drivers/net/ethernet/emulex/benet/be_main.c | 32 ++++++++++++++++++++---------
 2 files changed, 24 insertions(+), 11 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h
index a150401a6cb3..bf5ca71df77f 100644
--- a/drivers/net/ethernet/emulex/benet/be.h
+++ b/drivers/net/ethernet/emulex/benet/be.h
@@ -261,9 +261,10 @@ struct be_tx_obj {
 /* Struct to remember the pages posted for rx frags */
 struct be_rx_page_info {
 	struct page *page;
+	/* set to page-addr for last frag of the page & frag-addr otherwise */
 	DEFINE_DMA_UNMAP_ADDR(bus);
 	u16 page_offset;
-	bool last_page_user;
+	bool last_frag;		/* last frag of the page */
 };
 
 struct be_rx_stats {
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 4f87f5c0b03c..34644969a4be 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -1448,11 +1448,15 @@ static struct be_rx_page_info *get_rx_page_info(struct be_rx_obj *rxo)
 	rx_page_info = &rxo->page_info_tbl[frag_idx];
 	BUG_ON(!rx_page_info->page);
 
-	if (rx_page_info->last_page_user) {
+	if (rx_page_info->last_frag) {
 		dma_unmap_page(&adapter->pdev->dev,
 			       dma_unmap_addr(rx_page_info, bus),
 			       adapter->big_page_size, DMA_FROM_DEVICE);
-		rx_page_info->last_page_user = false;
+		rx_page_info->last_frag = false;
+	} else {
+		dma_sync_single_for_cpu(&adapter->pdev->dev,
+					dma_unmap_addr(rx_page_info, bus),
+					rx_frag_size, DMA_FROM_DEVICE);
 	}
 
 	queue_tail_inc(rxq);
@@ -1786,17 +1790,16 @@ static void be_post_rx_frags(struct be_rx_obj *rxo, gfp_t gfp)
 				rx_stats(rxo)->rx_post_fail++;
 				break;
 			}
-			page_info->page_offset = 0;
+			page_offset = 0;
 		} else {
 			get_page(pagep);
-			page_info->page_offset = page_offset + rx_frag_size;
+			page_offset += rx_frag_size;
 		}
-		page_offset = page_info->page_offset;
+		page_info->page_offset = page_offset;
 		page_info->page = pagep;
-		dma_unmap_addr_set(page_info, bus, page_dmaaddr);
-		frag_dmaaddr = page_dmaaddr + page_info->page_offset;
 
 		rxd = queue_head_node(rxq);
+		frag_dmaaddr = page_dmaaddr + page_info->page_offset;
 		rxd->fragpa_lo = cpu_to_le32(frag_dmaaddr & 0xFFFFFFFF);
 		rxd->fragpa_hi = cpu_to_le32(upper_32_bits(frag_dmaaddr));
 
@@ -1804,15 +1807,24 @@ static void be_post_rx_frags(struct be_rx_obj *rxo, gfp_t gfp)
 		if ((page_offset + rx_frag_size + rx_frag_size) >
 					adapter->big_page_size) {
 			pagep = NULL;
-			page_info->last_page_user = true;
+			page_info->last_frag = true;
+			dma_unmap_addr_set(page_info, bus, page_dmaaddr);
+		} else {
+			dma_unmap_addr_set(page_info, bus, frag_dmaaddr);
 		}
 
 		prev_page_info = page_info;
 		queue_head_inc(rxq);
 		page_info = &rxo->page_info_tbl[rxq->head];
 	}
-	if (pagep)
-		prev_page_info->last_page_user = true;
+
+	/* Mark the last frag of a page when we break out of the above loop
+	 * with no more slots available in the RXQ
+	 */
+	if (pagep) {
+		prev_page_info->last_frag = true;
+		dma_unmap_addr_set(prev_page_info, bus, page_dmaaddr);
+	}
 
 	if (posted) {
 		atomic_add(posted, &rxq->used);
-- 
cgit v1.2.2


From 9aa69bc3c7a721db74c62e58c385ac50fd928856 Mon Sep 17 00:00:00 2001
From: Alexander Aring <alex.aring@gmail.com>
Date: Tue, 4 Mar 2014 19:01:17 +0100
Subject: at86rf230: add help and 212 to Kconfig menu entry

Since commit 8fad346f366a72978ea942abd06bd501ebd39c22
(ieee802154: add basic support for RF212 to at86rf230 driver)

we support at86rf212 as well.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ieee802154/Kconfig | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ieee802154/Kconfig b/drivers/net/ieee802154/Kconfig
index 08ae4655423a..16e933107b54 100644
--- a/drivers/net/ieee802154/Kconfig
+++ b/drivers/net/ieee802154/Kconfig
@@ -32,8 +32,14 @@ config IEEE802154_FAKELB
 
 config IEEE802154_AT86RF230
         depends on IEEE802154_DRIVERS && MAC802154
-        tristate "AT86RF230/231 transceiver driver"
+	tristate "AT86RF230/231/212 transceiver driver"
         depends on SPI
+	---help---
+	  Say Y here to enable the at86rf230/231/212 SPI 802.15.4 wireless
+	  controller.
+
+	  This driver can also be built as a module. To do so, say M here.
+	  the module will be called 'at86rf230'.
 
 config IEEE802154_MRF24J40
        tristate "Microchip MRF24J40 transceiver driver"
-- 
cgit v1.2.2


From 6092c79fd00ce48ee8698955ea6419cc5cd65641 Mon Sep 17 00:00:00 2001
From: Alexander Aring <alex.aring@gmail.com>
Date: Tue, 4 Mar 2014 19:01:18 +0100
Subject: ieee802154: fix whitespace issues in Kconfig

This patch fixes some whitespace issues in Kconfig files of IEEE
802.15.4 subsytem.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ieee802154/Kconfig | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ieee802154/Kconfig b/drivers/net/ieee802154/Kconfig
index 16e933107b54..9aa06ec1e8a8 100644
--- a/drivers/net/ieee802154/Kconfig
+++ b/drivers/net/ieee802154/Kconfig
@@ -15,9 +15,9 @@ config IEEE802154_FAKEHARD
 	depends on  IEEE802154_DRIVERS
 	---help---
 	  Say Y here to enable the fake driver that serves as an example
-          of HardMAC device driver.
+	  of HardMAC device driver.
 
-          This driver can also be built as a module. To do so say M here.
+	  This driver can also be built as a module. To do so say M here.
 	  The module will be called 'fakehard'.
 
 config IEEE802154_FAKELB
@@ -31,9 +31,9 @@ config IEEE802154_FAKELB
 	  The module will be called 'fakelb'.
 
 config IEEE802154_AT86RF230
-        depends on IEEE802154_DRIVERS && MAC802154
+	depends on IEEE802154_DRIVERS && MAC802154
 	tristate "AT86RF230/231/212 transceiver driver"
-        depends on SPI
+	depends on SPI
 	---help---
 	  Say Y here to enable the at86rf230/231/212 SPI 802.15.4 wireless
 	  controller.
@@ -42,12 +42,12 @@ config IEEE802154_AT86RF230
 	  the module will be called 'at86rf230'.
 
 config IEEE802154_MRF24J40
-       tristate "Microchip MRF24J40 transceiver driver"
-       depends on IEEE802154_DRIVERS && MAC802154
-       depends on SPI
-       ---help---
-         Say Y here to enable the MRF24J20 SPI 802.15.4 wireless
-         controller.
-
-         This driver can also be built as a module. To do so, say M here.
-         the module will be called 'mrf24j40'.
+	tristate "Microchip MRF24J40 transceiver driver"
+	depends on IEEE802154_DRIVERS && MAC802154
+	depends on SPI
+	---help---
+	  Say Y here to enable the MRF24J20 SPI 802.15.4 wireless
+	  controller.
+
+	  This driver can also be built as a module. To do so, say M here.
+	  the module will be called 'mrf24j40'.
-- 
cgit v1.2.2


From db8515eff338f2f372b46d24385c359d4e411b2d Mon Sep 17 00:00:00 2001
From: hayeswang <hayeswang@realtek.com>
Date: Thu, 6 Mar 2014 15:07:16 +0800
Subject: r8152: deal with the empty line and space

Add or remove some empty lines. Replace the spaces with the tabs.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/r8152.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 0654bd3c4591..c8bad6283fa9 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -593,6 +593,7 @@ int set_registers(struct r8152 *tp, u16 value, u16 index, u16 size, void *data)
 			       value, index, tmp, size, 500);
 
 	kfree(tmp);
+
 	return ret;
 }
 
@@ -1514,6 +1515,7 @@ static void tx_bottom(struct r8152 *tp)
 				netif_warn(tp, tx_err, netdev,
 					   "failed tx_urb %d\n", res);
 				stats->tx_dropped += agg->skb_num;
+
 				spin_lock_irqsave(&tp->tx_lock, flags);
 				list_add_tail(&agg->list, &tp->tx_free);
 				spin_unlock_irqrestore(&tp->tx_lock, flags);
@@ -1833,7 +1835,6 @@ static void r8152_power_cut_en(struct r8152 *tp, bool enable)
 	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS);
 	ocp_data &= ~RESUME_INDICATE;
 	ocp_write_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS, ocp_data);
-
 }
 
 #define WAKE_ANY (WAKE_PHY | WAKE_MAGIC | WAKE_UCAST | WAKE_BCAST | WAKE_MCAST)
@@ -2013,8 +2014,8 @@ static void r8152b_hw_phy_cfg(struct r8152 *tp)
 
 static void r8152b_exit_oob(struct r8152 *tp)
 {
-	u32	ocp_data;
-	int	i;
+	u32 ocp_data;
+	int i;
 
 	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
 	ocp_data &= ~RCR_ACPT_ALL;
@@ -2573,6 +2574,7 @@ static int rtl8152_open(struct net_device *netdev)
 	netif_carrier_off(netdev);
 	netif_start_queue(netdev);
 	set_bit(WORK_ENABLE, &tp->flags);
+
 	res = usb_submit_urb(tp->intr_urb, GFP_KERNEL);
 	if (res) {
 		if (res == -ENODEV)
@@ -3101,6 +3103,7 @@ static int rtl8152_probe(struct usb_interface *intf,
 
 	netdev->features |= NETIF_F_IP_CSUM;
 	netdev->hw_features = NETIF_F_IP_CSUM;
+
 	SET_ETHTOOL_OPS(netdev, &ops);
 
 	tp->mii.dev = netdev;
-- 
cgit v1.2.2


From d104eafa643e393c224c536744bcebef30cedda1 Mon Sep 17 00:00:00 2001
From: hayeswang <hayeswang@realtek.com>
Date: Thu, 6 Mar 2014 15:07:17 +0800
Subject: r8152: replace tp->netdev with netdev

Replace some tp->netdev with netdev.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/r8152.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index c8bad6283fa9..151398b7a5be 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -1037,6 +1037,7 @@ static void read_bulk_callback(struct urb *urb)
 static void write_bulk_callback(struct urb *urb)
 {
 	struct net_device_stats *stats;
+	struct net_device *netdev;
 	unsigned long flags;
 	struct tx_agg *agg;
 	struct r8152 *tp;
@@ -1050,10 +1051,11 @@ static void write_bulk_callback(struct urb *urb)
 	if (!tp)
 		return;
 
-	stats = rtl8152_get_stats(tp->netdev);
+	netdev = tp->netdev;
+	stats = rtl8152_get_stats(netdev);
 	if (status) {
 		if (net_ratelimit())
-			netdev_warn(tp->netdev, "Tx status %d\n", status);
+			netdev_warn(netdev, "Tx status %d\n", status);
 		stats->tx_errors += agg->skb_num;
 	} else {
 		stats->tx_packets += agg->skb_num;
@@ -1066,7 +1068,7 @@ static void write_bulk_callback(struct urb *urb)
 
 	usb_autopm_put_interface_async(tp->intf);
 
-	if (!netif_carrier_ok(tp->netdev))
+	if (!netif_carrier_ok(netdev))
 		return;
 
 	if (!test_bit(WORK_ENABLE, &tp->flags))
-- 
cgit v1.2.2


From 05e0f1aada5037efaa441ac0117789ac1be045cc Mon Sep 17 00:00:00 2001
From: hayeswang <hayeswang@realtek.com>
Date: Thu, 6 Mar 2014 15:07:18 +0800
Subject: r8152: remove rtl8152_get_stats

The rtl8152_get_stats() returns the point address of the struct
net_device_stats. This could be got from struct net_device directly.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/r8152.c | 21 ++++++---------------
 1 file changed, 6 insertions(+), 15 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 151398b7a5be..b8eee365e15d 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -960,11 +960,6 @@ static int rtl8152_set_mac_address(struct net_device *netdev, void *p)
 	return 0;
 }
 
-static struct net_device_stats *rtl8152_get_stats(struct net_device *dev)
-{
-	return &dev->stats;
-}
-
 static void read_bulk_callback(struct urb *urb)
 {
 	struct net_device *netdev;
@@ -1052,7 +1047,7 @@ static void write_bulk_callback(struct urb *urb)
 		return;
 
 	netdev = tp->netdev;
-	stats = rtl8152_get_stats(netdev);
+	stats = &netdev->stats;
 	if (status) {
 		if (net_ratelimit())
 			netdev_warn(netdev, "Tx status %d\n", status);
@@ -1442,7 +1437,7 @@ static void rx_bottom(struct r8152 *tp)
 
 		while (urb->actual_length > len_used) {
 			struct net_device *netdev = tp->netdev;
-			struct net_device_stats *stats;
+			struct net_device_stats *stats = &netdev->stats;
 			unsigned int pkt_len;
 			struct sk_buff *skb;
 
@@ -1454,8 +1449,6 @@ static void rx_bottom(struct r8152 *tp)
 			if (urb->actual_length < len_used)
 				break;
 
-			stats = rtl8152_get_stats(netdev);
-
 			pkt_len -= CRC_SIZE;
 			rx_data += sizeof(struct rx_desc);
 
@@ -1504,16 +1497,14 @@ static void tx_bottom(struct r8152 *tp)
 
 		res = r8152_tx_agg_fill(tp, agg);
 		if (res) {
-			struct net_device_stats *stats;
-			struct net_device *netdev;
-			unsigned long flags;
-
-			netdev = tp->netdev;
-			stats = rtl8152_get_stats(netdev);
+			struct net_device *netdev = tp->netdev;
 
 			if (res == -ENODEV) {
 				netif_device_detach(netdev);
 			} else {
+				struct net_device_stats *stats = &netdev->stats;
+				unsigned long flags;
+
 				netif_warn(tp, tx_err, netdev,
 					   "failed tx_urb %d\n", res);
 				stats->tx_dropped += agg->skb_num;
-- 
cgit v1.2.2


From f3355dd9f7c261d2a3e505ba5c62ffe3cd4df97a Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Tue, 4 Mar 2014 16:53:47 -0600
Subject: rtlwifi: rtl8192ce: rtl8192cu: rtl8192de: rtl8192se: rtl8723ae:
 rtl8723be: rtl8188eu: Modify for new API

The addition of a driver for the RTL8821AE requires a new API for the
fill_tx_desc() and set_desc() callback routines. This commit makes the
appropriate modifications in all the other drivers.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 .../net/wireless/rtlwifi/btcoexist/halbtcoutsrc.c  |   2 +-
 drivers/net/wireless/rtlwifi/pci.c                 |  64 ++++---
 drivers/net/wireless/rtlwifi/pci.h                 |  10 +
 drivers/net/wireless/rtlwifi/rtl8188ee/trx.c       |   8 +-
 drivers/net/wireless/rtlwifi/rtl8188ee/trx.h       |   8 +-
 drivers/net/wireless/rtlwifi/rtl8192ce/trx.c       |   5 +-
 drivers/net/wireless/rtlwifi/rtl8192ce/trx.h       |   7 +-
 drivers/net/wireless/rtlwifi/rtl8192cu/trx.c       |   2 +-
 drivers/net/wireless/rtlwifi/rtl8192cu/trx.h       |   2 +-
 drivers/net/wireless/rtlwifi/rtl8192de/trx.c       |   5 +-
 drivers/net/wireless/rtlwifi/rtl8192de/trx.h       |   7 +-
 drivers/net/wireless/rtlwifi/rtl8192se/trx.c       |   5 +-
 drivers/net/wireless/rtlwifi/rtl8192se/trx.h       |   8 +-
 drivers/net/wireless/rtlwifi/rtl8723ae/trx.c       |   5 +-
 drivers/net/wireless/rtlwifi/rtl8723ae/trx.h       |   7 +-
 drivers/net/wireless/rtlwifi/rtl8723be/trx.c       |   5 +-
 drivers/net/wireless/rtlwifi/rtl8723be/trx.h       |   7 +-
 drivers/net/wireless/rtlwifi/usb.c                 |   2 +-
 drivers/net/wireless/rtlwifi/wifi.h                | 201 +++++++++++++++++++--
 19 files changed, 282 insertions(+), 78 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtlwifi/btcoexist/halbtcoutsrc.c b/drivers/net/wireless/rtlwifi/btcoexist/halbtcoutsrc.c
index 9e1217f2c966..b6722de64a31 100644
--- a/drivers/net/wireless/rtlwifi/btcoexist/halbtcoutsrc.c
+++ b/drivers/net/wireless/rtlwifi/btcoexist/halbtcoutsrc.c
@@ -980,7 +980,7 @@ void exhalbtc_set_chip_type(u8 chip_type)
 	case BT_RTL8723A:
 		gl_bt_coexist.board_info.bt_chip_type = BTC_CHIP_RTL8723A;
 		break;
-	case BT_RTL8821:
+	case BT_RTL8821A:
 		gl_bt_coexist.board_info.bt_chip_type = BTC_CHIP_RTL8821;
 		break;
 	case BT_RTL8723B:
diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c
index 257726860a43..f26f4ffc771d 100644
--- a/drivers/net/wireless/rtlwifi/pci.c
+++ b/drivers/net/wireless/rtlwifi/pci.c
@@ -811,19 +811,19 @@ done:
 		if (pci_dma_mapping_error(rtlpci->pdev, bufferaddress))
 			return;
 		tmp_one = 1;
-		rtlpriv->cfg->ops->set_desc((u8 *) pdesc, false,
+		rtlpriv->cfg->ops->set_desc(hw, (u8 *)pdesc, false,
 					    HW_DESC_RXBUFF_ADDR,
 					    (u8 *)&bufferaddress);
-		rtlpriv->cfg->ops->set_desc((u8 *)pdesc, false,
+		rtlpriv->cfg->ops->set_desc(hw, (u8 *)pdesc, false,
 					    HW_DESC_RXPKT_LEN,
 					    (u8 *)&rtlpci->rxbuffersize);
 
 		if (index == rtlpci->rxringcount - 1)
-			rtlpriv->cfg->ops->set_desc((u8 *)pdesc, false,
+			rtlpriv->cfg->ops->set_desc(hw, (u8 *)pdesc, false,
 						    HW_DESC_RXERO,
 						    &tmp_one);
 
-		rtlpriv->cfg->ops->set_desc((u8 *)pdesc, false, HW_DESC_RXOWN,
+		rtlpriv->cfg->ops->set_desc(hw, (u8 *)pdesc, false, HW_DESC_RXOWN,
 					    &tmp_one);
 
 		index = (index + 1) % rtlpci->rxringcount;
@@ -983,6 +983,8 @@ static void _rtl_pci_prepare_bcn_tasklet(struct ieee80211_hw *hw)
 	struct sk_buff *pskb = NULL;
 	struct rtl_tx_desc *pdesc = NULL;
 	struct rtl_tcb_desc tcb_desc;
+	/*This is for new trx flow*/
+	struct rtl_tx_buffer_desc *pbuffer_desc = NULL;
 	u8 temp_one = 1;
 
 	memset(&tcb_desc, 0, sizeof(struct rtl_tcb_desc));
@@ -1004,11 +1006,12 @@ static void _rtl_pci_prepare_bcn_tasklet(struct ieee80211_hw *hw)
 	info = IEEE80211_SKB_CB(pskb);
 	pdesc = &ring->desc[0];
 	rtlpriv->cfg->ops->fill_tx_desc(hw, hdr, (u8 *) pdesc,
-		info, NULL, pskb, BEACON_QUEUE, &tcb_desc);
+					(u8 *)pbuffer_desc, info, NULL, pskb,
+					BEACON_QUEUE, &tcb_desc);
 
 	__skb_queue_tail(&ring->queue, pskb);
 
-	rtlpriv->cfg->ops->set_desc((u8 *) pdesc, true, HW_DESC_OWN,
+	rtlpriv->cfg->ops->set_desc(hw, (u8 *)pdesc, true, HW_DESC_OWN,
 				    &temp_one);
 
 	return;
@@ -1113,7 +1116,7 @@ static int _rtl_pci_init_tx_ring(struct ieee80211_hw *hw,
 					      ((i + 1) % entries) *
 					      sizeof(*ring);
 
-		rtlpriv->cfg->ops->set_desc((u8 *)&(ring[i]),
+		rtlpriv->cfg->ops->set_desc(hw, (u8 *)&(ring[i]),
 					    true, HW_DESC_TX_NEXTDESC_ADDR,
 					    (u8 *)&nextdescaddress);
 	}
@@ -1188,19 +1191,19 @@ static int _rtl_pci_init_rx_ring(struct ieee80211_hw *hw)
 				dev_kfree_skb_any(skb);
 				return 1;
 			}
-			rtlpriv->cfg->ops->set_desc((u8 *)entry, false,
+			rtlpriv->cfg->ops->set_desc(hw, (u8 *)entry, false,
 						    HW_DESC_RXBUFF_ADDR,
 						    (u8 *)&bufferaddress);
-			rtlpriv->cfg->ops->set_desc((u8 *)entry, false,
+			rtlpriv->cfg->ops->set_desc(hw, (u8 *)entry, false,
 						    HW_DESC_RXPKT_LEN,
 						    (u8 *)&rtlpci->
 						    rxbuffersize);
-			rtlpriv->cfg->ops->set_desc((u8 *) entry, false,
+			rtlpriv->cfg->ops->set_desc(hw, (u8 *)entry, false,
 						    HW_DESC_RXOWN,
 						    &tmp_one);
 		}
 
-		rtlpriv->cfg->ops->set_desc((u8 *) entry, false,
+		rtlpriv->cfg->ops->set_desc(hw, (u8 *)entry, false,
 					    HW_DESC_RXERO, &tmp_one);
 	}
 	return 0;
@@ -1331,7 +1334,7 @@ int rtl_pci_reset_trx_ring(struct ieee80211_hw *hw)
 
 			for (i = 0; i < rtlpci->rxringcount; i++) {
 				entry = &rtlpci->rx_ring[rx_queue_idx].desc[i];
-				rtlpriv->cfg->ops->set_desc((u8 *) entry,
+				rtlpriv->cfg->ops->set_desc(hw, (u8 *)entry,
 							    false,
 							    HW_DESC_RXOWN,
 							    &tmp_one);
@@ -1424,6 +1427,7 @@ static int rtl_pci_tx(struct ieee80211_hw *hw,
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 	struct rtl8192_tx_ring *ring;
 	struct rtl_tx_desc *pdesc;
+	struct rtl_tx_buffer_desc *ptx_bd_desc = NULL;
 	u8 idx;
 	u8 hw_queue = _rtl_mac_to_hwqueue(hw, skb);
 	unsigned long flags;
@@ -1464,17 +1468,22 @@ static int rtl_pci_tx(struct ieee80211_hw *hw,
 		idx = 0;
 
 	pdesc = &ring->desc[idx];
-	own = (u8) rtlpriv->cfg->ops->get_desc((u8 *) pdesc,
-			true, HW_DESC_OWN);
+	if (rtlpriv->use_new_trx_flow) {
+		ptx_bd_desc = &ring->buffer_desc[idx];
+	} else {
+		own = (u8) rtlpriv->cfg->ops->get_desc((u8 *)pdesc,
+				true, HW_DESC_OWN);
 
-	if ((own == 1) && (hw_queue != BEACON_QUEUE)) {
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
-			 "No more TX desc@%d, ring->idx = %d, idx = %d, skb_queue_len = 0x%d\n",
-			 hw_queue, ring->idx, idx,
-			 skb_queue_len(&ring->queue));
+		if ((own == 1) && (hw_queue != BEACON_QUEUE)) {
+			RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+				 "No more TX desc@%d, ring->idx = %d, idx = %d, skb_queue_len = 0x%d\n",
+				 hw_queue, ring->idx, idx,
+				 skb_queue_len(&ring->queue));
 
-		spin_unlock_irqrestore(&rtlpriv->locks.irq_th_lock, flags);
-		return skb->len;
+			spin_unlock_irqrestore(&rtlpriv->locks.irq_th_lock,
+					       flags);
+			return skb->len;
+		}
 	}
 
 	if (ieee80211_is_data_qos(fc)) {
@@ -1494,17 +1503,20 @@ static int rtl_pci_tx(struct ieee80211_hw *hw,
 		rtlpriv->cfg->ops->led_control(hw, LED_CTL_TX);
 
 	rtlpriv->cfg->ops->fill_tx_desc(hw, hdr, (u8 *)pdesc,
-			info, sta, skb, hw_queue, ptcb_desc);
+			(u8 *)ptx_bd_desc, info, sta, skb, hw_queue, ptcb_desc);
 
 	__skb_queue_tail(&ring->queue, skb);
 
-	rtlpriv->cfg->ops->set_desc((u8 *)pdesc, true,
-				    HW_DESC_OWN, &temp_one);
-
+	if (rtlpriv->use_new_trx_flow) {
+		rtlpriv->cfg->ops->set_desc(hw, (u8 *)pdesc, true,
+					    HW_DESC_OWN, (u8 *)&hw_queue);
+	} else {
+		rtlpriv->cfg->ops->set_desc(hw, (u8 *)pdesc, true,
+					    HW_DESC_OWN, (u8 *)&temp_one);
+	}
 
 	if ((ring->entries - skb_queue_len(&ring->queue)) < 2 &&
 	    hw_queue != BEACON_QUEUE) {
-
 		RT_TRACE(rtlpriv, COMP_ERR, DBG_LOUD,
 			 "less desc left, stop skb_queue@%d, ring->idx = %d, idx = %d, skb_queue_len = 0x%d\n",
 			 hw_queue, ring->idx, idx,
diff --git a/drivers/net/wireless/rtlwifi/pci.h b/drivers/net/wireless/rtlwifi/pci.h
index 2a3333523ac4..90174a814a6d 100644
--- a/drivers/net/wireless/rtlwifi/pci.h
+++ b/drivers/net/wireless/rtlwifi/pci.h
@@ -137,12 +137,22 @@ struct rtl_tx_cmd_desc {
 	u32 dword[16];
 } __packed;
 
+/* In new TRX flow, Buffer_desc is new concept
+ * But TX wifi info == TX descriptor in old flow
+ * RX wifi info == RX descriptor in old flow
+ */
+struct rtl_tx_buffer_desc {
+	u32 dword[8]; /*seg = 4*/
+} __packed;
+
 struct rtl8192_tx_ring {
 	struct rtl_tx_desc *desc;
 	dma_addr_t dma;
 	unsigned int idx;
 	unsigned int entries;
 	struct sk_buff_head queue;
+	/*add for new trx flow*/
+	struct rtl_tx_buffer_desc *buffer_desc; /*tx buffer descriptor*/
 };
 
 struct rtl8192_rx_ring {
diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/trx.c b/drivers/net/wireless/rtlwifi/rtl8188ee/trx.c
index 27ace3054d56..2ba6f510d884 100644
--- a/drivers/net/wireless/rtlwifi/rtl8188ee/trx.c
+++ b/drivers/net/wireless/rtlwifi/rtl8188ee/trx.c
@@ -489,9 +489,8 @@ bool rtl88ee_rx_query_desc(struct ieee80211_hw *hw,
 
 void rtl88ee_tx_fill_desc(struct ieee80211_hw *hw,
 			  struct ieee80211_hdr *hdr, u8 *pdesc_tx,
-			  struct ieee80211_tx_info *info,
-			  struct ieee80211_sta *sta,
-			  struct sk_buff *skb,
+			  u8 *pbd_desc_tx, struct ieee80211_tx_info *info,
+			  struct ieee80211_sta *sta, struct sk_buff *skb,
 			  u8 hw_queue, struct rtl_tcb_desc *ptcb_desc)
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
@@ -734,7 +733,8 @@ void rtl88ee_tx_fill_cmddesc(struct ieee80211_hw *hw,
 		      pdesc, TX_DESC_SIZE);
 }
 
-void rtl88ee_set_desc(u8 *pdesc, bool istx, u8 desc_name, u8 *val)
+void rtl88ee_set_desc(struct ieee80211_hw *hw, u8 *pdesc, bool istx,
+		      u8 desc_name, u8 *val)
 {
 	if (istx == true) {
 		switch (desc_name) {
diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/trx.h b/drivers/net/wireless/rtlwifi/rtl8188ee/trx.h
index 21ca33a7c770..8c2609412d2c 100644
--- a/drivers/net/wireless/rtlwifi/rtl8188ee/trx.h
+++ b/drivers/net/wireless/rtlwifi/rtl8188ee/trx.h
@@ -777,15 +777,15 @@ struct rx_desc_88e {
 
 void rtl88ee_tx_fill_desc(struct ieee80211_hw *hw,
 			  struct ieee80211_hdr *hdr, u8 *pdesc_tx,
-			  struct ieee80211_tx_info *info,
-			  struct ieee80211_sta *sta,
-			  struct sk_buff *skb,
+			  u8 *pbd_desc_tx, struct ieee80211_tx_info *info,
+			  struct ieee80211_sta *sta, struct sk_buff *skb,
 			  u8 hw_queue, struct rtl_tcb_desc *ptcb_desc);
 bool rtl88ee_rx_query_desc(struct ieee80211_hw *hw,
 			   struct rtl_stats *status,
 			   struct ieee80211_rx_status *rx_status,
 			   u8 *pdesc, struct sk_buff *skb);
-void rtl88ee_set_desc(u8 *pdesc, bool istx, u8 desc_name, u8 *val);
+void rtl88ee_set_desc(struct ieee80211_hw *hw, u8 *pdesc, bool istx,
+		      u8 desc_name, u8 *val);
 u32 rtl88ee_get_desc(u8 *pdesc, bool istx, u8 desc_name);
 void rtl88ee_tx_polling(struct ieee80211_hw *hw, u8 hw_queue);
 void rtl88ee_tx_fill_cmddesc(struct ieee80211_hw *hw, u8 *pdesc,
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c b/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c
index 114858d46158..8f04817cb7ec 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c
@@ -426,7 +426,7 @@ bool rtl92ce_rx_query_desc(struct ieee80211_hw *hw,
 
 void rtl92ce_tx_fill_desc(struct ieee80211_hw *hw,
 			  struct ieee80211_hdr *hdr, u8 *pdesc_tx,
-			  struct ieee80211_tx_info *info,
+			  u8 *pbd_desc_tx, struct ieee80211_tx_info *info,
 			  struct ieee80211_sta *sta,
 			  struct sk_buff *skb,
 			  u8 hw_queue, struct rtl_tcb_desc *tcb_desc)
@@ -666,7 +666,8 @@ void rtl92ce_tx_fill_cmddesc(struct ieee80211_hw *hw,
 		      "H2C Tx Cmd Content", pdesc, TX_DESC_SIZE);
 }
 
-void rtl92ce_set_desc(u8 *pdesc, bool istx, u8 desc_name, u8 *val)
+void rtl92ce_set_desc(struct ieee80211_hw *hw, u8 *pdesc, bool istx,
+		      u8 desc_name, u8 *val)
 {
 	if (istx) {
 		switch (desc_name) {
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/trx.h b/drivers/net/wireless/rtlwifi/rtl8192ce/trx.h
index a7cdd514cb2e..9a39ec4204dd 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/trx.h
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/trx.h
@@ -711,8 +711,8 @@ struct rx_desc_92c {
 } __packed;
 
 void rtl92ce_tx_fill_desc(struct ieee80211_hw *hw,
-			  struct ieee80211_hdr *hdr,
-			  u8 *pdesc, struct ieee80211_tx_info *info,
+			  struct ieee80211_hdr *hdr, u8 *pdesc,
+			  u8 *pbd_desc_tx, struct ieee80211_tx_info *info,
 			  struct ieee80211_sta *sta,
 			  struct sk_buff *skb, u8 hw_queue,
 			  struct rtl_tcb_desc *ptcb_desc);
@@ -720,7 +720,8 @@ bool rtl92ce_rx_query_desc(struct ieee80211_hw *hw,
 			   struct rtl_stats *stats,
 			   struct ieee80211_rx_status *rx_status,
 			   u8 *pdesc, struct sk_buff *skb);
-void rtl92ce_set_desc(u8 *pdesc, bool istx, u8 desc_name, u8 *val);
+void rtl92ce_set_desc(struct ieee80211_hw *hw, u8 *pdesc, bool istx,
+		      u8 desc_name, u8 *val);
 u32 rtl92ce_get_desc(u8 *pdesc, bool istx, u8 desc_name);
 void rtl92ce_tx_polling(struct ieee80211_hw *hw, u8 hw_queue);
 void rtl92ce_tx_fill_cmddesc(struct ieee80211_hw *hw, u8 *pdesc,
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/trx.c b/drivers/net/wireless/rtlwifi/rtl8192cu/trx.c
index 1bc21ccfa71b..035e0dc3922c 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/trx.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/trx.c
@@ -495,7 +495,7 @@ static void _rtl_tx_desc_checksum(u8 *txdesc)
 
 void rtl92cu_tx_fill_desc(struct ieee80211_hw *hw,
 			  struct ieee80211_hdr *hdr, u8 *pdesc_tx,
-			  struct ieee80211_tx_info *info,
+			  u8 *pbd_desc_tx, struct ieee80211_tx_info *info,
 			  struct ieee80211_sta *sta,
 			  struct sk_buff *skb,
 			  u8 queue_index,
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/trx.h b/drivers/net/wireless/rtlwifi/rtl8192cu/trx.h
index 725c53accc58..fd8051dcd98a 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/trx.h
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/trx.h
@@ -420,7 +420,7 @@ struct sk_buff *rtl8192c_tx_aggregate_hdl(struct ieee80211_hw *,
 					   struct sk_buff_head *);
 void rtl92cu_tx_fill_desc(struct ieee80211_hw *hw,
 			  struct ieee80211_hdr *hdr, u8 *pdesc_tx,
-			  struct ieee80211_tx_info *info,
+			  u8 *pbd_desc_tx, struct ieee80211_tx_info *info,
 			  struct ieee80211_sta *sta,
 			  struct sk_buff *skb,
 			  u8 queue_index,
diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/trx.c b/drivers/net/wireless/rtlwifi/rtl8192de/trx.c
index 0eb0f4ae5920..99c2ab5dfceb 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192de/trx.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192de/trx.c
@@ -545,7 +545,7 @@ static void _rtl92de_insert_emcontent(struct rtl_tcb_desc *ptcb_desc,
 
 void rtl92de_tx_fill_desc(struct ieee80211_hw *hw,
 			  struct ieee80211_hdr *hdr, u8 *pdesc_tx,
-			  struct ieee80211_tx_info *info,
+			  u8 *pbd_desc_tx, struct ieee80211_tx_info *info,
 			  struct ieee80211_sta *sta,
 			  struct sk_buff *skb,
 			  u8 hw_queue, struct rtl_tcb_desc *ptcb_desc)
@@ -786,7 +786,8 @@ void rtl92de_tx_fill_cmddesc(struct ieee80211_hw *hw,
 	SET_TX_DESC_OWN(pdesc, 1);
 }
 
-void rtl92de_set_desc(u8 *pdesc, bool istx, u8 desc_name, u8 *val)
+void rtl92de_set_desc(struct ieee80211_hw *hw, u8 *pdesc, bool istx,
+		      u8 desc_name, u8 *val)
 {
 	if (istx) {
 		switch (desc_name) {
diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/trx.h b/drivers/net/wireless/rtlwifi/rtl8192de/trx.h
index c1b5dfb79d53..fb5cf0634e8d 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192de/trx.h
+++ b/drivers/net/wireless/rtlwifi/rtl8192de/trx.h
@@ -728,8 +728,8 @@ struct rx_desc_92d {
 } __packed;
 
 void rtl92de_tx_fill_desc(struct ieee80211_hw *hw,
-			  struct ieee80211_hdr *hdr,
-			  u8 *pdesc, struct ieee80211_tx_info *info,
+			  struct ieee80211_hdr *hdr, u8 *pdesc,
+			  u8 *pbd_desc_tx, struct ieee80211_tx_info *info,
 			  struct ieee80211_sta *sta,
 			  struct sk_buff *skb, u8 hw_queue,
 			  struct rtl_tcb_desc *ptcb_desc);
@@ -737,7 +737,8 @@ bool rtl92de_rx_query_desc(struct ieee80211_hw *hw,
 			   struct rtl_stats *stats,
 			   struct ieee80211_rx_status *rx_status,
 			   u8 *pdesc, struct sk_buff *skb);
-void rtl92de_set_desc(u8 *pdesc, bool istx, u8 desc_name, u8 *val);
+void rtl92de_set_desc(struct ieee80211_hw *hw, u8 *pdesc, bool istx,
+		      u8 desc_name, u8 *val);
 u32 rtl92de_get_desc(u8 *pdesc, bool istx, u8 desc_name);
 void rtl92de_tx_polling(struct ieee80211_hw *hw, u8 hw_queue);
 void rtl92de_tx_fill_cmddesc(struct ieee80211_hw *hw, u8 *pdesc,
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/trx.c b/drivers/net/wireless/rtlwifi/rtl8192se/trx.c
index 163a681962c6..36b48be8329c 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192se/trx.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/trx.c
@@ -336,7 +336,7 @@ bool rtl92se_rx_query_desc(struct ieee80211_hw *hw, struct rtl_stats *stats,
 
 void rtl92se_tx_fill_desc(struct ieee80211_hw *hw,
 		struct ieee80211_hdr *hdr, u8 *pdesc_tx,
-		struct ieee80211_tx_info *info,
+		u8 *pbd_desc_tx, struct ieee80211_tx_info *info,
 		struct ieee80211_sta *sta,
 		struct sk_buff *skb,
 		u8 hw_queue, struct rtl_tcb_desc *ptcb_desc)
@@ -573,7 +573,8 @@ void rtl92se_tx_fill_cmddesc(struct ieee80211_hw *hw, u8 *pdesc,
 	}
 }
 
-void rtl92se_set_desc(u8 *pdesc, bool istx, u8 desc_name, u8 *val)
+void rtl92se_set_desc(struct ieee80211_hw *hw, u8 *pdesc, bool istx,
+		      u8 desc_name, u8 *val)
 {
 	if (istx) {
 		switch (desc_name) {
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/trx.h b/drivers/net/wireless/rtlwifi/rtl8192se/trx.h
index 64dd66f287c1..5a13f17e3b41 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192se/trx.h
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/trx.h
@@ -29,8 +29,9 @@
 #ifndef __REALTEK_PCI92SE_TRX_H__
 #define __REALTEK_PCI92SE_TRX_H__
 
-void rtl92se_tx_fill_desc(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
-			  u8 *pdesc, struct ieee80211_tx_info *info,
+void rtl92se_tx_fill_desc(struct ieee80211_hw *hw,
+			  struct ieee80211_hdr *hdr, u8 *pdesc,
+			  u8 *pbd_desc_tx, struct ieee80211_tx_info *info,
 			  struct ieee80211_sta *sta,
 			  struct sk_buff *skb, u8 hw_queue,
 			  struct rtl_tcb_desc *ptcb_desc);
@@ -39,7 +40,8 @@ void rtl92se_tx_fill_cmddesc(struct ieee80211_hw *hw, u8 *pdesc, bool firstseg,
 bool rtl92se_rx_query_desc(struct ieee80211_hw *hw, struct rtl_stats *stats,
 			   struct ieee80211_rx_status *rx_status, u8 *pdesc,
 			   struct sk_buff *skb);
-void rtl92se_set_desc(u8 *pdesc, bool istx, u8 desc_name, u8 *val);
+void rtl92se_set_desc(struct ieee80211_hw *hw, u8 *pdesc, bool istx,
+		      u8 desc_name, u8 *val);
 u32 rtl92se_get_desc(u8 *pdesc, bool istx, u8 desc_name);
 void rtl92se_tx_polling(struct ieee80211_hw *hw, u8 hw_queue);
 
diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c b/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c
index 721162cacc3a..29adf55c6fd3 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c
@@ -365,7 +365,7 @@ bool rtl8723ae_rx_query_desc(struct ieee80211_hw *hw,
 
 void rtl8723ae_tx_fill_desc(struct ieee80211_hw *hw,
 			    struct ieee80211_hdr *hdr, u8 *pdesc_tx,
-			    struct ieee80211_tx_info *info,
+			    u8 *pbd_desc_tx, struct ieee80211_tx_info *info,
 			    struct ieee80211_sta *sta,
 			    struct sk_buff *skb, u8 hw_queue,
 			    struct rtl_tcb_desc *ptcdesc)
@@ -597,7 +597,8 @@ void rtl8723ae_tx_fill_cmddesc(struct ieee80211_hw *hw,
 		      pdesc, TX_DESC_SIZE);
 }
 
-void rtl8723ae_set_desc(u8 *pdesc, bool istx, u8 desc_name, u8 *val)
+void rtl8723ae_set_desc(struct ieee80211_hw *hw, u8 *pdesc, bool istx,
+			u8 desc_name, u8 *val)
 {
 	if (istx == true) {
 		switch (desc_name) {
diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/trx.h b/drivers/net/wireless/rtlwifi/rtl8723ae/trx.h
index c75bfe8d570c..4380b7d3a91a 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723ae/trx.h
+++ b/drivers/net/wireless/rtlwifi/rtl8723ae/trx.h
@@ -700,8 +700,8 @@ struct rx_desc_8723e {
 } __packed;
 
 void rtl8723ae_tx_fill_desc(struct ieee80211_hw *hw,
-			    struct ieee80211_hdr *hdr, u8 *pdesc_tx,
-			    struct ieee80211_tx_info *info,
+			    struct ieee80211_hdr *hdr, u8 *pdesc,
+			    u8 *pbd_desc_tx, struct ieee80211_tx_info *info,
 			    struct ieee80211_sta *sta,
 			    struct sk_buff *skb, u8 hw_queue,
 			    struct rtl_tcb_desc *ptcb_desc);
@@ -709,7 +709,8 @@ bool rtl8723ae_rx_query_desc(struct ieee80211_hw *hw,
 			     struct rtl_stats *status,
 			     struct ieee80211_rx_status *rx_status,
 			     u8 *pdesc, struct sk_buff *skb);
-void rtl8723ae_set_desc(u8 *pdesc, bool istx, u8 desc_name, u8 *val);
+void rtl8723ae_set_desc(struct ieee80211_hw *hw, u8 *pdesc, bool istx,
+			u8 desc_name, u8 *val);
 u32 rtl8723ae_get_desc(u8 *pdesc, bool istx, u8 desc_name);
 void rtl8723ae_tx_polling(struct ieee80211_hw *hw, u8 hw_queue);
 void rtl8723ae_tx_fill_cmddesc(struct ieee80211_hw *hw, u8 *pdesc,
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/trx.c b/drivers/net/wireless/rtlwifi/rtl8723be/trx.c
index 7779531919fb..74a75dceab08 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723be/trx.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/trx.c
@@ -639,7 +639,7 @@ bool rtl8723be_rx_query_desc(struct ieee80211_hw *hw,
 
 void rtl8723be_tx_fill_desc(struct ieee80211_hw *hw,
 			    struct ieee80211_hdr *hdr, u8 *pdesc_tx,
-			    struct ieee80211_tx_info *info,
+			    u8 *pbd_desc_tx, struct ieee80211_tx_info *info,
 			    struct ieee80211_sta *sta, struct sk_buff *skb,
 			    u8 hw_queue, struct rtl_tcb_desc *ptcb_desc)
 {
@@ -858,7 +858,8 @@ void rtl8723be_tx_fill_cmddesc(struct ieee80211_hw *hw, u8 *pdesc,
 	SET_TX_DESC_USE_RATE(pdesc, 1);
 }
 
-void rtl8723be_set_desc(u8 *pdesc, bool istx, u8 desc_name, u8 *val)
+void rtl8723be_set_desc(struct ieee80211_hw *hw, u8 *pdesc, bool istx,
+			u8 desc_name, u8 *val)
 {
 	if (istx) {
 		switch (desc_name) {
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/trx.h b/drivers/net/wireless/rtlwifi/rtl8723be/trx.h
index d375cf01c3dc..102f33dcc988 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723be/trx.h
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/trx.h
@@ -597,15 +597,16 @@ struct rx_desc_8723be {
 } __packed;
 
 void rtl8723be_tx_fill_desc(struct ieee80211_hw *hw,
-			    struct ieee80211_hdr *hdr, u8 *pdesc_tx,
-			    struct ieee80211_tx_info *info,
+			    struct ieee80211_hdr *hdr, u8 *pdesc,
+			    u8 *pbd_desc_tx, struct ieee80211_tx_info *info,
 			    struct ieee80211_sta *sta, struct sk_buff *skb,
 			    u8 hw_queue, struct rtl_tcb_desc *ptcb_desc);
 bool rtl8723be_rx_query_desc(struct ieee80211_hw *hw,
 			     struct rtl_stats *status,
 			     struct ieee80211_rx_status *rx_status,
 			     u8 *pdesc, struct sk_buff *skb);
-void rtl8723be_set_desc(u8 *pdesc, bool istx, u8 desc_name, u8 *val);
+void rtl8723be_set_desc(struct ieee80211_hw *hw, u8 *pdesc, bool istx,
+			u8 desc_name, u8 *val);
 u32 rtl8723be_get_desc(u8 *pdesc, bool istx, u8 desc_name);
 bool rtl8723be_is_tx_desc_closed(struct ieee80211_hw *hw,
 				 u8 hw_queue, u16 index);
diff --git a/drivers/net/wireless/rtlwifi/usb.c b/drivers/net/wireless/rtlwifi/usb.c
index 4e2a726cdb16..0398d3ea15b0 100644
--- a/drivers/net/wireless/rtlwifi/usb.c
+++ b/drivers/net/wireless/rtlwifi/usb.c
@@ -994,7 +994,7 @@ static void _rtl_usb_tx_preprocess(struct ieee80211_hw *hw,
 		seq_number += 1;
 		seq_number <<= 4;
 	}
-	rtlpriv->cfg->ops->fill_tx_desc(hw, hdr, (u8 *)pdesc, info, sta, skb,
+	rtlpriv->cfg->ops->fill_tx_desc(hw, hdr, (u8 *)pdesc, NULL, info, sta, skb,
 					hw_queue, &tcb_desc);
 	if (!ieee80211_has_morefrags(hdr->frame_control)) {
 		if (qc)
diff --git a/drivers/net/wireless/rtlwifi/wifi.h b/drivers/net/wireless/rtlwifi/wifi.h
index 2304c7f23361..5cb799e6bd08 100644
--- a/drivers/net/wireless/rtlwifi/wifi.h
+++ b/drivers/net/wireless/rtlwifi/wifi.h
@@ -41,6 +41,22 @@
 #include <linux/completion.h>
 #include "debug.h"
 
+#define	MASKBYTE0				0xff
+#define	MASKBYTE1				0xff00
+#define	MASKBYTE2				0xff0000
+#define	MASKBYTE3				0xff000000
+#define	MASKHWORD				0xffff0000
+#define	MASKLWORD				0x0000ffff
+#define	MASKDWORD				0xffffffff
+#define	MASK12BITS				0xfff
+#define	MASKH4BITS				0xf0000000
+#define MASKOFDM_D				0xffc00000
+#define	MASKCCK					0x3f3f3f3f
+
+#define	MASK4BITS				0x0f
+#define	MASK20BITS				0xfffff
+#define RFREG_OFFSET_MASK			0xfffff
+
 #define RF_CHANGE_BY_INIT			0
 #define RF_CHANGE_BY_IPS			BIT(28)
 #define RF_CHANGE_BY_PS				BIT(29)
@@ -87,7 +103,18 @@
 #define MAC80211_4ADDR_LEN			30
 
 #define CHANNEL_MAX_NUMBER	(14 + 24 + 21)	/* 14 is the max channel no */
+#define CHANNEL_MAX_NUMBER_2G		14
+#define CHANNEL_MAX_NUMBER_5G		54 /* Please refer to
+					    *"phy_GetChnlGroup8812A" and
+					    * "Hal_ReadTxPowerInfo8812A"
+					    */
+#define CHANNEL_MAX_NUMBER_5G_80M	7
 #define CHANNEL_GROUP_MAX	(3 + 9)	/*  ch1~3, 4~9, 10~14 = three groups */
+#define CHANNEL_MAX_NUMBER_5G		54 /* Please refer to
+					    *"phy_GetChnlGroup8812A" and
+					    * "Hal_ReadTxPowerInfo8812A"
+					    */
+#define CHANNEL_MAX_NUMBER_5G_80M	7
 #define MAX_PG_GROUP			13
 #define	CHANNEL_GROUP_MAX_2G		3
 #define	CHANNEL_GROUP_IDX_5GL		3
@@ -115,6 +142,11 @@
 #define MAX_BASE_NUM_IN_PHY_REG_PG_24G  6
 #define MAX_BASE_NUM_IN_PHY_REG_PG_5G	5
 
+#define RTL8192EE_SEG_NUM		1 /* 0:2 seg, 1: 4 seg, 2: 8 seg */
+
+#define DEL_SW_IDX_SZ		30
+#define BAND_NUM			3
+
 enum rf_tx_num {
 	RF_1TX = 0,
 	RF_2TX,
@@ -140,6 +172,8 @@ struct txpower_info_5g {
 	u8 ofdm_diff[MAX_RF_PATH][MAX_TX_COUNT];
 	u8 bw20_diff[MAX_RF_PATH][MAX_TX_COUNT];
 	u8 bw40_diff[MAX_RF_PATH][MAX_TX_COUNT];
+	u8 bw80_diff[MAX_RF_PATH][MAX_TX_COUNT];
+	u8 bw160_diff[MAX_RF_PATH][MAX_TX_COUNT];
 };
 
 enum rate_section {
@@ -186,6 +220,8 @@ enum hardware_type {
 	HARDWARE_TYPE_RTL8723U,
 	HARDWARE_TYPE_RTL8723BE,
 	HARDWARE_TYPE_RTL8188EE,
+	HARDWARE_TYPE_RTL8821AE,
+	HARDWARE_TYPE_RTL8812AE,
 
 	/* keep it last */
 	HARDWARE_TYPE_NUM
@@ -230,6 +266,8 @@ enum hardware_type {
 
 enum scan_operation_backup_opt {
 	SCAN_OPT_BACKUP = 0,
+	SCAN_OPT_BACKUP_BAND0 = 0,
+	SCAN_OPT_BACKUP_BAND1,
 	SCAN_OPT_RESTORE,
 	SCAN_OPT_MAX
 };
@@ -264,7 +302,9 @@ struct bb_reg_def {
 
 enum io_type {
 	IO_CMD_PAUSE_DM_BY_SCAN = 0,
-	IO_CMD_RESUME_DM_BY_SCAN = 1,
+	IO_CMD_PAUSE_BAND0_DM_BY_SCAN = 0,
+	IO_CMD_PAUSE_BAND1_DM_BY_SCAN = 1,
+	IO_CMD_RESUME_DM_BY_SCAN = 2,
 };
 
 enum hw_variables {
@@ -331,6 +371,7 @@ enum hw_variables {
 	HW_VAR_SET_RPWM,
 	HW_VAR_H2C_FW_PWRMODE,
 	HW_VAR_H2C_FW_JOINBSSRPT,
+	HW_VAR_H2C_FW_MEDIASTATUSRPT,
 	HW_VAR_H2C_FW_P2P_PS_OFFLOAD,
 	HW_VAR_FW_PSMODE_STATUS,
 	HW_VAR_RESUME_CLK_ON,
@@ -364,6 +405,7 @@ enum hw_variables {
 	HAL_DEF_WOWLAN,
 	HW_VAR_MRC,
 	HW_VAR_KEEP_ALIVE,
+	HW_VAR_NAV_UPPER,
 
 	HW_VAR_MGT_FILTER,
 	HW_VAR_CTRL_FILTER,
@@ -423,6 +465,7 @@ enum hw_descs {
 	HW_DESC_RXBUFF_ADDR,
 	HW_DESC_RXPKT_LEN,
 	HW_DESC_RXERO,
+	HW_DESC_RX_PREPARE,
 };
 
 enum prime_sc {
@@ -441,6 +484,7 @@ enum rf_type {
 enum ht_channel_width {
 	HT_CHANNEL_WIDTH_20 = 0,
 	HT_CHANNEL_WIDTH_20_40 = 1,
+	HT_CHANNEL_WIDTH_80 = 2,
 };
 
 /* Ref: 802.11i sepc D10.0 7.3.2.25.1
@@ -505,6 +549,9 @@ enum rtl_var_map {
 	MAC_RCR_ACRC32,
 	MAC_RCR_ACF,
 	MAC_RCR_AAP,
+	MAC_HIMR,
+	MAC_HIMRE,
+	MAC_HSISR,
 
 	/*efuse map */
 	EFUSE_TEST,
@@ -679,7 +726,9 @@ enum wireless_mode {
 	WIRELESS_MODE_G = 0x04,
 	WIRELESS_MODE_AUTO = 0x08,
 	WIRELESS_MODE_N_24G = 0x10,
-	WIRELESS_MODE_N_5G = 0x20
+	WIRELESS_MODE_N_5G = 0x20,
+	WIRELESS_MODE_AC_5G = 0x40,
+	WIRELESS_MODE_AC_24G  = 0x80
 };
 
 #define IS_WIRELESS_MODE_A(wirelessmode)	\
@@ -703,6 +752,8 @@ enum ratr_table_mode {
 	RATR_INX_WIRELESS_B = 6,
 	RATR_INX_WIRELESS_MC = 7,
 	RATR_INX_WIRELESS_A = 8,
+	RATR_INX_WIRELESS_AC_5N = 8,
+	RATR_INX_WIRELESS_AC_24N = 9,
 };
 
 enum rtl_link_state {
@@ -837,8 +888,12 @@ struct wireless_stats {
 	long signal_strength;
 
 	u8 rx_rssi_percentage[4];
+	u8 rx_evm_dbm[4];
 	u8 rx_evm_percentage[2];
 
+	u16 rx_cfo_short[4];
+	u16 rx_cfo_tail[4];
+
 	struct rt_smooth_data ui_rssi;
 	struct rt_smooth_data ui_link_quality;
 };
@@ -867,6 +922,10 @@ struct rate_adaptive {
 	u32 ping_rssi_thresh_for_ra;
 	u32 last_ratr;
 	u8 pre_ratr_state;
+	u8 ldpc_thres;
+	bool use_ldpc;
+	bool lower_rts_rate;
+	bool is_special_data;
 };
 
 struct regd_pair_mapping {
@@ -875,6 +934,16 @@ struct regd_pair_mapping {
 	u16 reg_2ghz_ctl;
 };
 
+struct dynamic_primary_cca {
+	u8 pricca_flag;
+	u8 intf_flag;
+	u8 intf_type;
+	u8 dup_rts_flag;
+	u8 monitor_flag;
+	u8 ch_offset;
+	u8 mf_state;
+};
+
 struct rtl_regulatory {
 	char alpha2[2];
 	u16 country_code;
@@ -1010,11 +1079,14 @@ struct rtl_phy {
 	u32 iqk_bb_backup[10];
 	bool iqk_initialized;
 
+	bool rfpath_rx_enable[MAX_RF_PATH];
+	u8 reg_837;
 	/* Dual mac */
 	bool need_iqk;
 	struct iqk_matrix_regs iqk_matrix[IQK_MATRIX_SETTINGS_NUM];
 
 	bool rfpi_enable;
+	bool iqk_in_progress;
 
 	u8 pwrgroup_cnt;
 	u8 cck_high_power;
@@ -1027,6 +1099,9 @@ struct rtl_phy {
 	u8 txpwr_by_rate_base_24g[TX_PWR_BY_RATE_NUM_RF]
 				 [TX_PWR_BY_RATE_NUM_RF]
 				 [MAX_BASE_NUM_IN_PHY_REG_PG_24G];
+	u8 txpwr_by_rate_base_5g[TX_PWR_BY_RATE_NUM_RF]
+				[TX_PWR_BY_RATE_NUM_RF]
+				[MAX_BASE_NUM_IN_PHY_REG_PG_5G];
 	u8 default_initialgain[4];
 
 	/* the current Tx power level */
@@ -1039,6 +1114,7 @@ struct rtl_phy {
 	bool apk_done;
 	u32 reg_rf3c[2];	/* pathA / pathB  */
 
+	u32 backup_rf_0x1a;/*92ee*/
 	/* bfsync */
 	u8 framesync;
 	u32 framesync_c34;
@@ -1047,6 +1123,7 @@ struct rtl_phy {
 	struct phy_parameters hwparam_tables[MAX_TAB];
 	u16 rf_pathmap;
 
+	u8 hw_rof_enable; /*Enable GPIO[9] as WL RF HW PDn source*/
 	enum rt_polarity_ctl polarity_ctl;
 };
 
@@ -1174,6 +1251,7 @@ struct rtl_mac {
 	u8 use_cts_protect;
 	u8 cur_40_prime_sc;
 	u8 cur_40_prime_sc_bk;
+	u8 cur_80_prime_sc;
 	u64 tsf;
 	u8 retry_short;
 	u8 retry_long;
@@ -1276,6 +1354,7 @@ struct rtl_hal {
 	/*Reserve page start offset except beacon in TxQ. */
 	u8 fw_rsvdpage_startoffset;
 	u8 h2c_txcmd_seq;
+	u8 current_ra_rate;
 
 	/* FW Cmd IO related */
 	u16 fwcmd_iomap;
@@ -1315,6 +1394,9 @@ struct rtl_hal {
 	bool disable_amsdu_8k;
 	bool master_of_dmsp;
 	bool slave_of_dmsp;
+
+	u16 rx_tag;/*for 92ee*/
+	u8 rts_en;
 };
 
 struct rtl_security {
@@ -1412,11 +1494,18 @@ struct rtl_dm {
 	u8 txpower_track_control;
 	bool interrupt_migration;
 	bool disable_tx_int;
-	char ofdm_index[2];
+	char ofdm_index[MAX_RF_PATH];
+	u8 default_ofdm_index;
+	u8 default_cck_index;
 	char cck_index;
 	char delta_power_index[MAX_RF_PATH];
 	char delta_power_index_last[MAX_RF_PATH];
 	char power_index_offset[MAX_RF_PATH];
+	char absolute_ofdm_swing_idx[MAX_RF_PATH];
+	char remnant_ofdm_swing_idx[MAX_RF_PATH];
+	char remnant_cck_idx;
+	bool modify_txagc_flag_path_a;
+	bool modify_txagc_flag_path_b;
 
 	bool one_entry_only;
 	struct dm_phy_dbg_info dbginfo;
@@ -1431,9 +1520,10 @@ struct rtl_dm {
 	u8 cfo_threshold;
 	u32 packet_count;
 	u32 packet_count_pre;
+	u8 tx_rate;
 
 	/*88e tx power tracking*/
-	u8	swing_idx_ofdm[2];
+	u8	swing_idx_ofdm[MAX_RF_PATH];
 	u8	swing_idx_ofdm_cur;
 	u8	swing_idx_ofdm_base[MAX_RF_PATH];
 	bool	swing_flag_ofdm;
@@ -1442,10 +1532,43 @@ struct rtl_dm {
 	u8	swing_idx_cck_base;
 	bool	swing_flag_cck;
 
+	char	swing_diff_2g;
+	char	swing_diff_5g;
+
+	u8 delta_swing_table_idx_24gccka_p[DEL_SW_IDX_SZ];
+	u8 delta_swing_table_idx_24gccka_n[DEL_SW_IDX_SZ];
+	u8 delta_swing_table_idx_24gcckb_p[DEL_SW_IDX_SZ];
+	u8 delta_swing_table_idx_24gcckb_n[DEL_SW_IDX_SZ];
+	u8 delta_swing_table_idx_24ga_p[DEL_SW_IDX_SZ];
+	u8 delta_swing_table_idx_24ga_n[DEL_SW_IDX_SZ];
+	u8 delta_swing_table_idx_24gb_p[DEL_SW_IDX_SZ];
+	u8 delta_swing_table_idx_24gb_n[DEL_SW_IDX_SZ];
+	u8 delta_swing_table_idx_5ga_p[BAND_NUM][DEL_SW_IDX_SZ];
+	u8 delta_swing_table_idx_5ga_n[BAND_NUM][DEL_SW_IDX_SZ];
+	u8 delta_swing_table_idx_5gb_p[BAND_NUM][DEL_SW_IDX_SZ];
+	u8 delta_swing_table_idx_5gb_n[BAND_NUM][DEL_SW_IDX_SZ];
+	u8 delta_swing_table_idx_24ga_p_8188e[DEL_SW_IDX_SZ];
+	u8 delta_swing_table_idx_24ga_n_8188e[DEL_SW_IDX_SZ];
+
 	/* DMSP */
 	bool supp_phymode_switch;
 
+	/* DulMac */
 	struct fast_ant_training fat_table;
+
+	u8	resp_tx_path;
+	u8	path_sel;
+	u32	patha_sum;
+	u32	pathb_sum;
+	u32	patha_cnt;
+	u32	pathb_cnt;
+
+	u8 pre_channel;
+	u8 *p_channel;
+	u8 linked_interval;
+
+	u64 last_tx_ok_cnt;
+	u64 last_rx_ok_cnt;
 };
 
 #define	EFUSE_MAX_LOGICAL_SIZE			256
@@ -1491,11 +1614,6 @@ struct rtl_efuse {
 	u8 eeprom_chnlarea_txpwr_cck[MAX_RF_PATH][CHANNEL_GROUP_MAX_2G];
 	u8 eeprom_chnlarea_txpwr_ht40_1s[MAX_RF_PATH][CHANNEL_GROUP_MAX];
 	u8 eprom_chnl_txpwr_ht40_2sdf[MAX_RF_PATH][CHANNEL_GROUP_MAX];
-	u8 txpwrlevel_cck[2][CHANNEL_MAX_NUMBER_2G];
-	/* For HT 40MHZ pwr */
-	u8 txpwrlevel_ht40_1s[MAX_RF_PATH][CHANNEL_MAX_NUMBER];
-	u8 txpwrlevel_ht40_2s[MAX_RF_PATH][CHANNEL_MAX_NUMBER];
-	u8 txpwr_ht40diff[MAX_RF_PATH][MAX_TX_COUNT];/*BW40_24G_Diff*/
 
 	u8 internal_pa_5g[2];	/* pathA / pathB */
 	u8 eeprom_c9;
@@ -1506,9 +1624,38 @@ struct rtl_efuse {
 	u8 pwrgroup_ht20[2][CHANNEL_MAX_NUMBER];
 	u8 pwrgroup_ht40[2][CHANNEL_MAX_NUMBER];
 
-	char txpwr_ht20diff[2][CHANNEL_MAX_NUMBER]; /*HT 20<->40 Pwr diff */
-	/*For HT<->legacy pwr diff*/
-	u8 txpwr_legacyhtdiff[2][CHANNEL_MAX_NUMBER];
+	u8 txpwrlevel_cck[MAX_RF_PATH][CHANNEL_MAX_NUMBER_2G];
+	/*For HT 40MHZ pwr */
+	u8 txpwrlevel_ht40_1s[MAX_RF_PATH][CHANNEL_MAX_NUMBER];
+	/*For HT 40MHZ pwr */
+	u8 txpwrlevel_ht40_2s[MAX_RF_PATH][CHANNEL_MAX_NUMBER];
+
+	/*--------------------------------------------------------*
+	 * 8192CE\8192SE\8192DE\8723AE use the following 4 arrays,
+	 * other ICs (8188EE\8723BE\8192EE\8812AE...)
+	 * define new arrays in Windows code.
+	 * BUT, in linux code, we use the same array for all ICs.
+	 *
+	 * The Correspondance relation between two arrays is:
+	 * txpwr_cckdiff[][] == CCK_24G_Diff[][]
+	 * txpwr_ht20diff[][] == BW20_24G_Diff[][]
+	 * txpwr_ht40diff[][] == BW40_24G_Diff[][]
+	 * txpwr_legacyhtdiff[][] == OFDM_24G_Diff[][]
+	 *
+	 * Sizes of these arrays are decided by the larger ones.
+	 */
+	char txpwr_cckdiff[MAX_RF_PATH][CHANNEL_MAX_NUMBER];
+	char txpwr_ht20diff[MAX_RF_PATH][CHANNEL_MAX_NUMBER];
+	char txpwr_ht40diff[MAX_RF_PATH][CHANNEL_MAX_NUMBER];
+	char txpwr_legacyhtdiff[MAX_RF_PATH][CHANNEL_MAX_NUMBER];
+
+	u8 txpwr_5g_bw40base[MAX_RF_PATH][CHANNEL_MAX_NUMBER];
+	u8 txpwr_5g_bw80base[MAX_RF_PATH][CHANNEL_MAX_NUMBER_5G_80M];
+	char txpwr_5g_ofdmdiff[MAX_RF_PATH][MAX_TX_COUNT];
+	char txpwr_5g_bw20diff[MAX_RF_PATH][MAX_TX_COUNT];
+	char txpwr_5g_bw40diff[MAX_RF_PATH][MAX_TX_COUNT];
+	char txpwr_5g_bw80diff[MAX_RF_PATH][MAX_TX_COUNT];
+
 	u8 txpwr_safetyflag;			/* Band edge enable flag */
 	u16 eeprom_txpowerdiff;
 	u8 legacy_httxpowerdiff;	/* Legacy to HT rate power diff */
@@ -1639,7 +1786,9 @@ struct rtl_stats {
 	bool rx_is40Mhzpacket;
 	u32 rx_pwdb_all;
 	u8 rx_mimo_signalstrength[4];	/*in 0~100 index */
-	s8 rx_mimo_sig_qual[2];
+	s8 rx_mimo_sig_qual[4];
+	u8 rx_pwr[4]; /* per-path's pwdb */
+	u8 rx_snr[4]; /* per-path's SNR */
 	bool packet_matchbssid;
 	bool is_cck;
 	bool is_ht;
@@ -1743,9 +1892,17 @@ struct rtl_hal_ops {
 	void (*set_hw_reg) (struct ieee80211_hw *hw, u8 variable, u8 *val);
 	void (*update_rate_tbl) (struct ieee80211_hw *hw,
 			      struct ieee80211_sta *sta, u8 rssi_level);
+	void (*pre_fill_tx_bd_desc)(struct ieee80211_hw *hw, u8 *tx_bd_desc,
+				    u8 *desc, u8 queue_index,
+				    struct sk_buff *skb, dma_addr_t addr);
 	void (*update_rate_mask) (struct ieee80211_hw *hw, u8 rssi_level);
+	u16 (*rx_desc_buff_remained_cnt)(struct ieee80211_hw *hw,
+					 u8 queue_index);
+	void (*rx_check_dma_ok)(struct ieee80211_hw *hw, u8 *header_desc,
+				u8 queue_index);
 	void (*fill_tx_desc) (struct ieee80211_hw *hw,
 			      struct ieee80211_hdr *hdr, u8 *pdesc_tx,
+			      u8 *pbd_desc_tx,
 			      struct ieee80211_tx_info *info,
 			      struct ieee80211_sta *sta,
 			      struct sk_buff *skb, u8 hw_queue,
@@ -1768,7 +1925,8 @@ struct rtl_hal_ops {
 				    enum rf_pwrstate rfpwr_state);
 	void (*led_control) (struct ieee80211_hw *hw,
 			     enum led_ctl_mode ledaction);
-	void (*set_desc) (u8 *pdesc, bool istx, u8 desc_name, u8 *val);
+	void (*set_desc)(struct ieee80211_hw *hw, u8 *pdesc, bool istx,
+			 u8 desc_name, u8 *val);
 	u32 (*get_desc) (u8 *pdesc, bool istx, u8 desc_name);
 	bool (*is_tx_desc_closed) (struct ieee80211_hw *hw,
 				   u8 hw_queue, u16 index);
@@ -1812,6 +1970,8 @@ struct rtl_hal_ops {
 			      u32 cmd_len, u8 *p_cmdbuffer);
 	bool (*get_btc_status) (void);
 	bool (*is_fw_header) (struct rtl92c_firmware_header *hdr);
+	u32 (*rx_command_packet)(struct ieee80211_hw *hw,
+				 struct rtl_stats status, struct sk_buff *skb);
 };
 
 struct rtl_intf_ops {
@@ -1921,6 +2081,8 @@ struct rtl_locks {
 
 	/*Easy concurrent*/
 	spinlock_t check_sendpkt_lock;
+
+	spinlock_t iqk_lock;
 };
 
 struct rtl_works {
@@ -2014,6 +2176,7 @@ struct dig_t {
 	u8 cursta_cstate;
 	u8 presta_cstate;
 	u8 curmultista_cstate;
+	u8 stop_dig;
 	char back_val;
 	char back_range_max;
 	char back_range_min;
@@ -2031,6 +2194,7 @@ struct dig_t {
 	u8 cur_ccasate;
 	u8 large_fa_hit;
 	u8 dig_dynamic_min;
+	u8 dig_dynamic_min_1;
 	u8 forbidden_igi;
 	u8 dig_state;
 	u8 dig_highpwrstate;
@@ -2174,6 +2338,7 @@ struct rtl_priv {
 
 	struct rtl_ps_ctl psc;
 	struct rate_adaptive ra;
+	struct dynamic_primary_cca primarycca;
 	struct wireless_stats stats;
 	struct rt_link_detect link_info;
 	struct false_alarm_statistics falsealm_cnt;
@@ -2259,9 +2424,15 @@ enum bt_co_type {
 	BT_CSR_BC8 = 4,
 	BT_RTL8756 = 5,
 	BT_RTL8723A = 6,
-	BT_RTL8821 = 7,
+	BT_RTL8821A = 7,
 	BT_RTL8723B = 8,
 	BT_RTL8192E = 9,
+	BT_RTL8812A = 11,
+};
+
+enum bt_total_ant_num {
+	ANT_TOTAL_X2 = 0,
+	ANT_TOTAL_X1 = 1
 };
 
 enum bt_cur_state {
-- 
cgit v1.2.2


From 25b13dbc38a74b76da5746d75867e306b70035bd Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Tue, 4 Mar 2014 16:53:48 -0600
Subject: rtlwifi: Move common routines to core

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 .../net/wireless/rtlwifi/btcoexist/halbt_precomp.h |  12 -
 drivers/net/wireless/rtlwifi/core.c                |  60 +++
 drivers/net/wireless/rtlwifi/core.h                |   4 +
 drivers/net/wireless/rtlwifi/ps.c                  | 100 +++++
 drivers/net/wireless/rtlwifi/ps.h                  |  60 +++
 drivers/net/wireless/rtlwifi/rtl8188ee/Makefile    |   1 -
 drivers/net/wireless/rtlwifi/rtl8188ee/hw.c        |  19 +-
 drivers/net/wireless/rtlwifi/rtl8188ee/phy.c       |  61 +--
 drivers/net/wireless/rtlwifi/rtl8188ee/pwrseq.h    |   1 -
 drivers/net/wireless/rtlwifi/rtl8188ee/reg.h       |  16 -
 drivers/net/wireless/rtlwifi/rtl8192ce/phy.c       |  71 +---
 drivers/net/wireless/rtlwifi/rtl8192ce/reg.h       |  16 -
 drivers/net/wireless/rtlwifi/rtl8192cu/phy.c       |  71 +---
 drivers/net/wireless/rtlwifi/rtl8192de/dm.c        |  50 +--
 drivers/net/wireless/rtlwifi/rtl8192de/hw.c        |  10 +-
 drivers/net/wireless/rtlwifi/rtl8192de/phy.c       | 429 +++++++++------------
 drivers/net/wireless/rtlwifi/rtl8192de/reg.h       |  14 -
 drivers/net/wireless/rtlwifi/rtl8192de/rf.c        |   6 +-
 drivers/net/wireless/rtlwifi/rtl8192se/phy.c       |  87 +----
 drivers/net/wireless/rtlwifi/rtl8192se/reg.h       |  12 -
 drivers/net/wireless/rtlwifi/rtl8723ae/Makefile    |   1 -
 drivers/net/wireless/rtlwifi/rtl8723ae/hw.c        |   1 -
 drivers/net/wireless/rtlwifi/rtl8723ae/phy.c       |  48 +--
 drivers/net/wireless/rtlwifi/rtl8723ae/pwrseq.h    |   1 -
 drivers/net/wireless/rtlwifi/rtl8723ae/reg.h       |  16 -
 drivers/net/wireless/rtlwifi/rtl8723be/Makefile    |   1 -
 drivers/net/wireless/rtlwifi/rtl8723be/hw.c        |  15 +-
 drivers/net/wireless/rtlwifi/rtl8723be/phy.c       |  29 +-
 drivers/net/wireless/rtlwifi/rtl8723be/pwrseq.h    |   1 -
 drivers/net/wireless/rtlwifi/rtl8723be/reg.h       |  16 -
 drivers/net/wireless/rtlwifi/wifi.h                |  16 +
 31 files changed, 520 insertions(+), 725 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtlwifi/btcoexist/halbt_precomp.h b/drivers/net/wireless/rtlwifi/btcoexist/halbt_precomp.h
index 582532fc199a..d76684eb24d0 100644
--- a/drivers/net/wireless/rtlwifi/btcoexist/halbt_precomp.h
+++ b/drivers/net/wireless/rtlwifi/btcoexist/halbt_precomp.h
@@ -72,16 +72,4 @@
 #define BIT30	0x40000000
 #define BIT31	0x80000000
 
-#define	MASKBYTE0	0xff
-#define	MASKBYTE1	0xff00
-#define	MASKBYTE2	0xff0000
-#define	MASKBYTE3	0xff000000
-#define	MASKHWORD	0xffff0000
-#define	MASKLWORD	0x0000ffff
-#define	MASKDWORD	0xffffffff
-#define	MASK12BITS	0xfff
-#define	MASKH4BITS	0xf0000000
-#define MASKOFDM_D	0xffc00000
-#define	MASKCCK		0x3f3f3f3f
-
 #endif	/* __HALBT_PRECOMP_H__ */
diff --git a/drivers/net/wireless/rtlwifi/core.c b/drivers/net/wireless/rtlwifi/core.c
index 724b830fe429..ded691f76f2f 100644
--- a/drivers/net/wireless/rtlwifi/core.c
+++ b/drivers/net/wireless/rtlwifi/core.c
@@ -36,6 +36,66 @@
 
 #include <linux/export.h>
 
+void rtl_addr_delay(u32 addr)
+{
+	if (addr == 0xfe)
+		mdelay(50);
+	else if (addr == 0xfd)
+		mdelay(5);
+	else if (addr == 0xfc)
+		mdelay(1);
+	else if (addr == 0xfb)
+		udelay(50);
+	else if (addr == 0xfa)
+		udelay(5);
+	else if (addr == 0xf9)
+		udelay(1);
+}
+EXPORT_SYMBOL(rtl_addr_delay);
+
+void rtl_rfreg_delay(struct ieee80211_hw *hw, enum radio_path rfpath, u32 addr,
+		     u32 mask, u32 data)
+{
+	if (addr == 0xfe) {
+		mdelay(50);
+	} else if (addr == 0xfd) {
+		mdelay(5);
+	} else if (addr == 0xfc) {
+		mdelay(1);
+	} else if (addr == 0xfb) {
+		udelay(50);
+	} else if (addr == 0xfa) {
+		udelay(5);
+	} else if (addr == 0xf9) {
+		udelay(1);
+	} else {
+		rtl_set_rfreg(hw, rfpath, addr, mask, data);
+		udelay(1);
+	}
+}
+EXPORT_SYMBOL(rtl_rfreg_delay);
+
+void rtl_bb_delay(struct ieee80211_hw *hw, u32 addr, u32 data)
+{
+	if (addr == 0xfe) {
+		mdelay(50);
+	} else if (addr == 0xfd) {
+		mdelay(5);
+	} else if (addr == 0xfc) {
+		mdelay(1);
+	} else if (addr == 0xfb) {
+		udelay(50);
+	} else if (addr == 0xfa) {
+		udelay(5);
+	} else if (addr == 0xf9) {
+		udelay(1);
+	} else {
+		rtl_set_bbreg(hw, addr, MASKDWORD, data);
+		udelay(1);
+	}
+}
+EXPORT_SYMBOL(rtl_bb_delay);
+
 void rtl_fw_cb(const struct firmware *firmware, void *context)
 {
 	struct ieee80211_hw *hw = context;
diff --git a/drivers/net/wireless/rtlwifi/core.h b/drivers/net/wireless/rtlwifi/core.h
index 2fe46a1b4f1f..027e75374dcc 100644
--- a/drivers/net/wireless/rtlwifi/core.h
+++ b/drivers/net/wireless/rtlwifi/core.h
@@ -41,5 +41,9 @@
 
 extern const struct ieee80211_ops rtl_ops;
 void rtl_fw_cb(const struct firmware *firmware, void *context);
+void rtl_addr_delay(u32 addr);
+void rtl_rfreg_delay(struct ieee80211_hw *hw, enum radio_path rfpath, u32 addr,
+		     u32 mask, u32 data);
+void rtl_bb_delay(struct ieee80211_hw *hw, u32 addr, u32 data);
 
 #endif
diff --git a/drivers/net/wireless/rtlwifi/ps.c b/drivers/net/wireless/rtlwifi/ps.c
index d1c0191a195b..de7f05f848ef 100644
--- a/drivers/net/wireless/rtlwifi/ps.c
+++ b/drivers/net/wireless/rtlwifi/ps.c
@@ -32,6 +32,106 @@
 #include "base.h"
 #include "ps.h"
 
+/*	Description:
+ *		This routine deals with the Power Configuration CMD
+ *		 parsing for RTL8723/RTL8188E Series IC.
+ *	Assumption:
+ *		We should follow specific format that was released from HW SD.
+ */
+bool rtl_hal_pwrseqcmdparsing(struct rtl_priv *rtlpriv, u8 cut_version,
+			      u8 faversion, u8 interface_type,
+			      struct wlan_pwr_cfg pwrcfgcmd[])
+{
+	struct wlan_pwr_cfg cfg_cmd = {0};
+	bool polling_bit = false;
+	u32 ary_idx = 0;
+	u8 value = 0;
+	u32 offset = 0;
+	u32 polling_count = 0;
+	u32 max_polling_cnt = 5000;
+
+	do {
+		cfg_cmd = pwrcfgcmd[ary_idx];
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+			"rtl_hal_pwrseqcmdparsing(): offset(%#x),cut_msk(%#x), famsk(%#x),"
+			"interface_msk(%#x), base(%#x), cmd(%#x), msk(%#x), value(%#x)\n",
+			GET_PWR_CFG_OFFSET(cfg_cmd),
+					   GET_PWR_CFG_CUT_MASK(cfg_cmd),
+			GET_PWR_CFG_FAB_MASK(cfg_cmd),
+					     GET_PWR_CFG_INTF_MASK(cfg_cmd),
+			GET_PWR_CFG_BASE(cfg_cmd), GET_PWR_CFG_CMD(cfg_cmd),
+			GET_PWR_CFG_MASK(cfg_cmd), GET_PWR_CFG_VALUE(cfg_cmd));
+
+		if ((GET_PWR_CFG_FAB_MASK(cfg_cmd)&faversion) &&
+		    (GET_PWR_CFG_CUT_MASK(cfg_cmd)&cut_version) &&
+		    (GET_PWR_CFG_INTF_MASK(cfg_cmd)&interface_type)) {
+			switch (GET_PWR_CFG_CMD(cfg_cmd)) {
+			case PWR_CMD_READ:
+				RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+					"rtl_hal_pwrseqcmdparsing(): PWR_CMD_READ\n");
+				break;
+			case PWR_CMD_WRITE:
+				RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+					"rtl_hal_pwrseqcmdparsing(): PWR_CMD_WRITE\n");
+				offset = GET_PWR_CFG_OFFSET(cfg_cmd);
+
+				/*Read the value from system register*/
+				value = rtl_read_byte(rtlpriv, offset);
+				value &= (~(GET_PWR_CFG_MASK(cfg_cmd)));
+				value |= (GET_PWR_CFG_VALUE(cfg_cmd) &
+					  GET_PWR_CFG_MASK(cfg_cmd));
+
+				/*Write the value back to sytem register*/
+				rtl_write_byte(rtlpriv, offset, value);
+				break;
+			case PWR_CMD_POLLING:
+				RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+					"rtl_hal_pwrseqcmdparsing(): PWR_CMD_POLLING\n");
+				polling_bit = false;
+				offset = GET_PWR_CFG_OFFSET(cfg_cmd);
+
+				do {
+					value = rtl_read_byte(rtlpriv, offset);
+
+					value &= GET_PWR_CFG_MASK(cfg_cmd);
+					if (value ==
+					    (GET_PWR_CFG_VALUE(cfg_cmd)
+					    & GET_PWR_CFG_MASK(cfg_cmd)))
+						polling_bit = true;
+					else
+						udelay(10);
+
+					if (polling_count++ > max_polling_cnt)
+						return false;
+				} while (!polling_bit);
+				break;
+			case PWR_CMD_DELAY:
+				RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+					"rtl_hal_pwrseqcmdparsing(): PWR_CMD_DELAY\n");
+				if (GET_PWR_CFG_VALUE(cfg_cmd) ==
+				    PWRSEQ_DELAY_US)
+					udelay(GET_PWR_CFG_OFFSET(cfg_cmd));
+				else
+					mdelay(GET_PWR_CFG_OFFSET(cfg_cmd));
+				break;
+			case PWR_CMD_END:
+				RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+					 "rtl_hal_pwrseqcmdparsing(): PWR_CMD_END\n");
+				return true;
+			default:
+				RT_ASSERT(false,
+					 "rtl_hal_pwrseqcmdparsing(): Unknown CMD!!\n");
+				break;
+			}
+
+		}
+		ary_idx++;
+	} while (1);
+
+	return true;
+}
+EXPORT_SYMBOL(rtl_hal_pwrseqcmdparsing);
+
 bool rtl_ps_enable_nic(struct ieee80211_hw *hw)
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
diff --git a/drivers/net/wireless/rtlwifi/ps.h b/drivers/net/wireless/rtlwifi/ps.h
index 88bd76ea88f7..3bd41f958974 100644
--- a/drivers/net/wireless/rtlwifi/ps.h
+++ b/drivers/net/wireless/rtlwifi/ps.h
@@ -32,6 +32,66 @@
 
 #define MAX_SW_LPS_SLEEP_INTV	5
 
+/*---------------------------------------------
+ * 3 The value of cmd: 4 bits
+ *---------------------------------------------
+ */
+#define    PWR_CMD_READ		0x00
+#define    PWR_CMD_WRITE	0x01
+#define    PWR_CMD_POLLING	0x02
+#define    PWR_CMD_DELAY	0x03
+#define    PWR_CMD_END		0x04
+
+/* define the base address of each block */
+#define	PWR_BASEADDR_MAC	0x00
+#define	PWR_BASEADDR_USB	0x01
+#define	PWR_BASEADDR_PCIE	0x02
+#define	PWR_BASEADDR_SDIO	0x03
+
+#define	PWR_FAB_ALL_MSK		(BIT(0)|BIT(1)|BIT(2)|BIT(3))
+#define	PWR_CUT_TESTCHIP_MSK	BIT(0)
+#define	PWR_CUT_A_MSK		BIT(1)
+#define	PWR_CUT_B_MSK		BIT(2)
+#define	PWR_CUT_C_MSK		BIT(3)
+#define	PWR_CUT_D_MSK		BIT(4)
+#define	PWR_CUT_E_MSK		BIT(5)
+#define	PWR_CUT_F_MSK		BIT(6)
+#define	PWR_CUT_G_MSK		BIT(7)
+#define	PWR_CUT_ALL_MSK		0xFF
+#define PWR_INTF_SDIO_MSK	BIT(0)
+#define PWR_INTF_USB_MSK	BIT(1)
+#define PWR_INTF_PCI_MSK	BIT(2)
+#define PWR_INTF_ALL_MSK	(BIT(0)|BIT(1)|BIT(2)|BIT(3))
+
+enum pwrseq_delay_unit {
+	PWRSEQ_DELAY_US,
+	PWRSEQ_DELAY_MS,
+};
+
+struct wlan_pwr_cfg {
+	u16 offset;
+	u8 cut_msk;
+	u8 fab_msk:4;
+	u8 interface_msk:4;
+	u8 base:4;
+	u8 cmd:4;
+	u8 msk;
+	u8 value;
+};
+
+#define	GET_PWR_CFG_OFFSET(__PWR_CMD)	(__PWR_CMD.offset)
+#define	GET_PWR_CFG_CUT_MASK(__PWR_CMD)	(__PWR_CMD.cut_msk)
+#define	GET_PWR_CFG_FAB_MASK(__PWR_CMD)	(__PWR_CMD.fab_msk)
+#define	GET_PWR_CFG_INTF_MASK(__PWR_CMD)	(__PWR_CMD.interface_msk)
+#define	GET_PWR_CFG_BASE(__PWR_CMD)	(__PWR_CMD.base)
+#define	GET_PWR_CFG_CMD(__PWR_CMD)	(__PWR_CMD.cmd)
+#define	GET_PWR_CFG_MASK(__PWR_CMD)	(__PWR_CMD.msk)
+#define	GET_PWR_CFG_VALUE(__PWR_CMD)	(__PWR_CMD.value)
+
+bool rtl_hal_pwrseqcmdparsing(struct rtl_priv *rtlpriv, u8 cut_version,
+			      u8 fab_version, u8 interface_type,
+			      struct wlan_pwr_cfg pwrcfgcmd[]);
+
 bool rtl_ps_set_rf_state(struct ieee80211_hw *hw,
 			 enum rf_pwrstate state_toset, u32 changesource);
 bool rtl_ps_enable_nic(struct ieee80211_hw *hw);
diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/Makefile b/drivers/net/wireless/rtlwifi/rtl8188ee/Makefile
index 5b194e97f4b3..a85419a37651 100644
--- a/drivers/net/wireless/rtlwifi/rtl8188ee/Makefile
+++ b/drivers/net/wireless/rtlwifi/rtl8188ee/Makefile
@@ -5,7 +5,6 @@ rtl8188ee-objs :=		\
 		led.o		\
 		phy.o		\
 		pwrseq.o	\
-		pwrseqcmd.o	\
 		rf.o		\
 		sw.o		\
 		table.o		\
diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/hw.c b/drivers/net/wireless/rtlwifi/rtl8188ee/hw.c
index d608d75ff6ff..6561805c3a88 100644
--- a/drivers/net/wireless/rtlwifi/rtl8188ee/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8188ee/hw.c
@@ -41,7 +41,6 @@
 #include "fw.h"
 #include "led.h"
 #include "hw.h"
-#include "pwrseqcmd.h"
 #include "pwrseq.h"
 
 #define LLT_CONFIG		5
@@ -815,11 +814,11 @@ static bool _rtl88ee_init_mac(struct ieee80211_hw *hw)
 
 	rtl_write_byte(rtlpriv, REG_RSV_CTRL, 0x00);
 	/* HW Power on sequence */
-	if (!rtl88_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK,
-					PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,
-					Rtl8188E_NIC_ENABLE_FLOW)) {
+	if (!rtl_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK,
+				      PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,
+				      Rtl8188E_NIC_ENABLE_FLOW)) {
 		RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
-			 "init MAC Fail as rtl88_hal_pwrseqcmdparsing\n");
+			 "init MAC Fail as rtl_hal_pwrseqcmdparsing\n");
 		return false;
 	}
 
@@ -1346,9 +1345,9 @@ static void _rtl88ee_poweroff_adapter(struct ieee80211_hw *hw)
 	}
 	rtl_write_byte(rtlpriv, REG_PCIE_CTRL_REG+1, 0xFF);
 
-	rtl88_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
-				   PWR_INTF_PCI_MSK,
-				   Rtl8188E_NIC_LPS_ENTER_FLOW);
+	rtl_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
+				 PWR_INTF_PCI_MSK,
+				 Rtl8188E_NIC_LPS_ENTER_FLOW);
 
 	rtl_write_byte(rtlpriv, REG_RF_CTRL, 0x00);
 
@@ -1362,8 +1361,8 @@ static void _rtl88ee_poweroff_adapter(struct ieee80211_hw *hw)
 	u1b_tmp = rtl_read_byte(rtlpriv, REG_32K_CTRL);
 	rtl_write_byte(rtlpriv, REG_32K_CTRL, (u1b_tmp & (~BIT(0))));
 
-	rtl88_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
-				   PWR_INTF_PCI_MSK, Rtl8188E_NIC_DISABLE_FLOW);
+	rtl_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
+				 PWR_INTF_PCI_MSK, Rtl8188E_NIC_DISABLE_FLOW);
 
 	u1b_tmp = rtl_read_byte(rtlpriv, REG_RSV_CTRL+1);
 	rtl_write_byte(rtlpriv, REG_RSV_CTRL+1, (u1b_tmp & (~BIT(3))));
diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/phy.c b/drivers/net/wireless/rtlwifi/rtl8188ee/phy.c
index 54d4ec2dc26b..1cd6c16d597e 100644
--- a/drivers/net/wireless/rtlwifi/rtl8188ee/phy.c
+++ b/drivers/net/wireless/rtlwifi/rtl8188ee/phy.c
@@ -29,6 +29,7 @@
 
 #include "../wifi.h"
 #include "../pci.h"
+#include "../core.h"
 #include "../ps.h"
 #include "reg.h"
 #include "def.h"
@@ -151,18 +152,7 @@ static bool config_bb_with_pgheader(struct ieee80211_hw *hw,
 			v2 = table_pg[i + 1];
 
 			if (v1 < 0xcdcdcdcd) {
-				if (table_pg[i] == 0xfe)
-					mdelay(50);
-				else if (table_pg[i] == 0xfd)
-					mdelay(5);
-				else if (table_pg[i] == 0xfc)
-					mdelay(1);
-				else if (table_pg[i] == 0xfb)
-					udelay(50);
-				else if (table_pg[i] == 0xfa)
-					udelay(5);
-				else if (table_pg[i] == 0xf9)
-					udelay(1);
+				rtl_addr_delay(table_pg[i]);
 
 				store_pwrindex_offset(hw, table_pg[i],
 						      table_pg[i + 1],
@@ -672,24 +662,9 @@ static void _rtl8188e_config_rf_reg(struct ieee80211_hw *hw,
 				    u32 addr, u32 data, enum radio_path rfpath,
 				    u32 regaddr)
 {
-	if (addr == 0xffe) {
-		mdelay(50);
-	} else if (addr == 0xfd) {
-		mdelay(5);
-	} else if (addr == 0xfc) {
-		mdelay(1);
-	} else if (addr == 0xfb) {
-		udelay(50);
-	} else if (addr == 0xfa) {
-		udelay(5);
-	} else if (addr == 0xf9) {
-		udelay(1);
-	} else {
-		rtl_set_rfreg(hw, rfpath, regaddr,
-			      RFREG_OFFSET_MASK,
-			      data);
-		udelay(1);
-	}
+	rtl_rfreg_delay(hw, rfpath, regaddr,
+			RFREG_OFFSET_MASK,
+			data);
 }
 
 static void rtl88_config_s(struct ieee80211_hw *hw,
@@ -702,28 +677,6 @@ static void rtl88_config_s(struct ieee80211_hw *hw,
 				addr | maskforphyset);
 }
 
-static void _rtl8188e_config_bb_reg(struct ieee80211_hw *hw,
-				    u32 addr, u32 data)
-{
-	if (addr == 0xfe) {
-		mdelay(50);
-	} else if (addr == 0xfd) {
-		mdelay(5);
-	} else if (addr == 0xfc) {
-		mdelay(1);
-	} else if (addr == 0xfb) {
-		udelay(50);
-	} else if (addr == 0xfa) {
-		udelay(5);
-	} else if (addr == 0xf9) {
-		udelay(1);
-	} else {
-		rtl_set_bbreg(hw, addr, MASKDWORD, data);
-		udelay(1);
-	}
-}
-
-
 #define NEXT_PAIR(v1, v2, i)				\
 	do {						\
 		i += 2; v1 = array_table[i];		\
@@ -795,7 +748,7 @@ static void set_baseband_phy_config(struct ieee80211_hw *hw)
 		v1 = array_table[i];
 		v2 = array_table[i + 1];
 		if (v1 < 0xcdcdcdcd) {
-			_rtl8188e_config_bb_reg(hw, v1, v2);
+			rtl_bb_delay(hw, v1, v2);
 		} else {/*This line is the start line of branch.*/
 			if (!check_cond(hw, array_table[i])) {
 				/*Discard the following (offset, data) pairs*/
@@ -811,7 +764,7 @@ static void set_baseband_phy_config(struct ieee80211_hw *hw)
 				while (v2 != 0xDEAD &&
 				       v2 != 0xCDEF &&
 				       v2 != 0xCDCD && i < arraylen - 2) {
-					_rtl8188e_config_bb_reg(hw, v1, v2);
+					rtl_bb_delay(hw, v1, v2);
 					NEXT_PAIR(v1, v2, i);
 				}
 
diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseq.h b/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseq.h
index 028ec6dd52b4..32e135ab9a63 100644
--- a/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseq.h
+++ b/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseq.h
@@ -30,7 +30,6 @@
 #ifndef __RTL8723E_PWRSEQ_H__
 #define __RTL8723E_PWRSEQ_H__
 
-#include "pwrseqcmd.h"
 /*
 	Check document WM-20110607-Paul-RTL8188E_Power_Architecture-R02.vsd
 	There are 6 HW Power States:
diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/reg.h b/drivers/net/wireless/rtlwifi/rtl8188ee/reg.h
index d849abf7d94a..7af85cfa8f87 100644
--- a/drivers/net/wireless/rtlwifi/rtl8188ee/reg.h
+++ b/drivers/net/wireless/rtlwifi/rtl8188ee/reg.h
@@ -2215,22 +2215,6 @@
 #define	BWORD1					0xc
 #define	BWORD					0xf
 
-#define	MASKBYTE0				0xff
-#define	MASKBYTE1				0xff00
-#define	MASKBYTE2				0xff0000
-#define	MASKBYTE3				0xff000000
-#define	MASKHWORD				0xffff0000
-#define	MASKLWORD				0x0000ffff
-#define	MASKDWORD				0xffffffff
-#define	MASK12BITS				0xfff
-#define	MASKH4BITS				0xf0000000
-#define MASKOFDM_D				0xffc00000
-#define	MASKCCK					0x3f3f3f3f
-
-#define	MASK4BITS				0x0f
-#define	MASK20BITS				0xfffff
-#define RFREG_OFFSET_MASK			0xfffff
-
 #define	BENABLE					0x1
 #define	BDISABLE				0x0
 
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/phy.c b/drivers/net/wireless/rtlwifi/rtl8192ce/phy.c
index 73262ca3864b..98b22303c84d 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/phy.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/phy.c
@@ -30,6 +30,7 @@
 #include "../wifi.h"
 #include "../pci.h"
 #include "../ps.h"
+#include "../core.h"
 #include "reg.h"
 #include "def.h"
 #include "hw.h"
@@ -198,18 +199,7 @@ bool _rtl92ce_phy_config_bb_with_headerfile(struct ieee80211_hw *hw,
 	}
 	if (configtype == BASEBAND_CONFIG_PHY_REG) {
 		for (i = 0; i < phy_reg_arraylen; i = i + 2) {
-			if (phy_regarray_table[i] == 0xfe)
-				mdelay(50);
-			else if (phy_regarray_table[i] == 0xfd)
-				mdelay(5);
-			else if (phy_regarray_table[i] == 0xfc)
-				mdelay(1);
-			else if (phy_regarray_table[i] == 0xfb)
-				udelay(50);
-			else if (phy_regarray_table[i] == 0xfa)
-				udelay(5);
-			else if (phy_regarray_table[i] == 0xf9)
-				udelay(1);
+			rtl_addr_delay(phy_regarray_table[i]);
 			rtl_set_bbreg(hw, phy_regarray_table[i], MASKDWORD,
 				      phy_regarray_table[i + 1]);
 			udelay(1);
@@ -245,18 +235,7 @@ bool _rtl92ce_phy_config_bb_with_pgheaderfile(struct ieee80211_hw *hw,
 
 	if (configtype == BASEBAND_CONFIG_PHY_REG) {
 		for (i = 0; i < phy_regarray_pg_len; i = i + 3) {
-			if (phy_regarray_table_pg[i] == 0xfe)
-				mdelay(50);
-			else if (phy_regarray_table_pg[i] == 0xfd)
-				mdelay(5);
-			else if (phy_regarray_table_pg[i] == 0xfc)
-				mdelay(1);
-			else if (phy_regarray_table_pg[i] == 0xfb)
-				udelay(50);
-			else if (phy_regarray_table_pg[i] == 0xfa)
-				udelay(5);
-			else if (phy_regarray_table_pg[i] == 0xf9)
-				udelay(1);
+			rtl_addr_delay(phy_regarray_table_pg[i]);
 
 			_rtl92c_store_pwrIndex_diffrate_offset(hw,
 					       phy_regarray_table_pg[i],
@@ -305,46 +284,16 @@ bool rtl92c_phy_config_rf_with_headerfile(struct ieee80211_hw *hw,
 	switch (rfpath) {
 	case RF90_PATH_A:
 		for (i = 0; i < radioa_arraylen; i = i + 2) {
-			if (radioa_array_table[i] == 0xfe)
-				mdelay(50);
-			else if (radioa_array_table[i] == 0xfd)
-				mdelay(5);
-			else if (radioa_array_table[i] == 0xfc)
-				mdelay(1);
-			else if (radioa_array_table[i] == 0xfb)
-				udelay(50);
-			else if (radioa_array_table[i] == 0xfa)
-				udelay(5);
-			else if (radioa_array_table[i] == 0xf9)
-				udelay(1);
-			else {
-				rtl_set_rfreg(hw, rfpath, radioa_array_table[i],
-					      RFREG_OFFSET_MASK,
-					      radioa_array_table[i + 1]);
-				udelay(1);
-			}
+			rtl_rfreg_delay(hw, rfpath, radioa_array_table[i],
+					RFREG_OFFSET_MASK,
+					radioa_array_table[i + 1]);
 		}
 		break;
 	case RF90_PATH_B:
 		for (i = 0; i < radiob_arraylen; i = i + 2) {
-			if (radiob_array_table[i] == 0xfe) {
-				mdelay(50);
-			} else if (radiob_array_table[i] == 0xfd)
-				mdelay(5);
-			else if (radiob_array_table[i] == 0xfc)
-				mdelay(1);
-			else if (radiob_array_table[i] == 0xfb)
-				udelay(50);
-			else if (radiob_array_table[i] == 0xfa)
-				udelay(5);
-			else if (radiob_array_table[i] == 0xf9)
-				udelay(1);
-			else {
-				rtl_set_rfreg(hw, rfpath, radiob_array_table[i],
-					      RFREG_OFFSET_MASK,
-					      radiob_array_table[i + 1]);
-				udelay(1);
-			}
+			rtl_rfreg_delay(hw, rfpath, radiob_array_table[i],
+					RFREG_OFFSET_MASK,
+					radiob_array_table[i + 1]);
 		}
 		break;
 	case RF90_PATH_C:
@@ -355,6 +304,8 @@ bool rtl92c_phy_config_rf_with_headerfile(struct ieee80211_hw *hw,
 		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
 			 "switch case not processed\n");
 		break;
+	default:
+		break;
 	}
 	return true;
 }
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/reg.h b/drivers/net/wireless/rtlwifi/rtl8192ce/reg.h
index 8922ecb47ad2..ed703a1b3b7c 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/reg.h
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/reg.h
@@ -2044,22 +2044,6 @@
 #define	BWORD1					0xc
 #define	BWORD					0xf
 
-#define	MASKBYTE0				0xff
-#define	MASKBYTE1				0xff00
-#define	MASKBYTE2				0xff0000
-#define	MASKBYTE3				0xff000000
-#define	MASKHWORD				0xffff0000
-#define	MASKLWORD				0x0000ffff
-#define	MASKDWORD				0xffffffff
-#define	MASK12BITS				0xfff
-#define	MASKH4BITS				0xf0000000
-#define MASKOFDM_D				0xffc00000
-#define	MASKCCK					0x3f3f3f3f
-
-#define	MASK4BITS				0x0f
-#define	MASK20BITS				0xfffff
-#define RFREG_OFFSET_MASK			0xfffff
-
 #define	BENABLE					0x1
 #define	BDISABLE				0x0
 
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/phy.c b/drivers/net/wireless/rtlwifi/rtl8192cu/phy.c
index 0c09240eadcc..9831ff1128ca 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/phy.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/phy.c
@@ -30,6 +30,7 @@
 #include "../wifi.h"
 #include "../pci.h"
 #include "../ps.h"
+#include "../core.h"
 #include "reg.h"
 #include "def.h"
 #include "phy.h"
@@ -188,18 +189,7 @@ bool _rtl92cu_phy_config_bb_with_headerfile(struct ieee80211_hw *hw,
 	}
 	if (configtype == BASEBAND_CONFIG_PHY_REG) {
 		for (i = 0; i < phy_reg_arraylen; i = i + 2) {
-			if (phy_regarray_table[i] == 0xfe)
-				mdelay(50);
-			else if (phy_regarray_table[i] == 0xfd)
-				mdelay(5);
-			else if (phy_regarray_table[i] == 0xfc)
-				mdelay(1);
-			else if (phy_regarray_table[i] == 0xfb)
-				udelay(50);
-			else if (phy_regarray_table[i] == 0xfa)
-				udelay(5);
-			else if (phy_regarray_table[i] == 0xf9)
-				udelay(1);
+			rtl_addr_delay(phy_regarray_table[i]);
 			rtl_set_bbreg(hw, phy_regarray_table[i], MASKDWORD,
 				      phy_regarray_table[i + 1]);
 			udelay(1);
@@ -236,18 +226,7 @@ bool _rtl92cu_phy_config_bb_with_pgheaderfile(struct ieee80211_hw *hw,
 	phy_regarray_table_pg = rtlphy->hwparam_tables[PHY_REG_PG].pdata;
 	if (configtype == BASEBAND_CONFIG_PHY_REG) {
 		for (i = 0; i < phy_regarray_pg_len; i = i + 3) {
-			if (phy_regarray_table_pg[i] == 0xfe)
-				mdelay(50);
-			else if (phy_regarray_table_pg[i] == 0xfd)
-				mdelay(5);
-			else if (phy_regarray_table_pg[i] == 0xfc)
-				mdelay(1);
-			else if (phy_regarray_table_pg[i] == 0xfb)
-				udelay(50);
-			else if (phy_regarray_table_pg[i] == 0xfa)
-				udelay(5);
-			else if (phy_regarray_table_pg[i] == 0xf9)
-				udelay(1);
+			rtl_addr_delay(phy_regarray_table_pg[i]);
 			_rtl92c_store_pwrIndex_diffrate_offset(hw,
 						  phy_regarray_table_pg[i],
 						  phy_regarray_table_pg[i + 1],
@@ -294,46 +273,16 @@ bool rtl92cu_phy_config_rf_with_headerfile(struct ieee80211_hw *hw,
 	switch (rfpath) {
 	case RF90_PATH_A:
 		for (i = 0; i < radioa_arraylen; i = i + 2) {
-			if (radioa_array_table[i] == 0xfe)
-				mdelay(50);
-			else if (radioa_array_table[i] == 0xfd)
-				mdelay(5);
-			else if (radioa_array_table[i] == 0xfc)
-				mdelay(1);
-			else if (radioa_array_table[i] == 0xfb)
-				udelay(50);
-			else if (radioa_array_table[i] == 0xfa)
-				udelay(5);
-			else if (radioa_array_table[i] == 0xf9)
-				udelay(1);
-			else {
-				rtl_set_rfreg(hw, rfpath, radioa_array_table[i],
-					      RFREG_OFFSET_MASK,
-					      radioa_array_table[i + 1]);
-				udelay(1);
-			}
+			rtl_rfreg_delay(hw, rfpath, radioa_array_table[i],
+					RFREG_OFFSET_MASK,
+					radioa_array_table[i + 1]);
 		}
 		break;
 	case RF90_PATH_B:
 		for (i = 0; i < radiob_arraylen; i = i + 2) {
-			if (radiob_array_table[i] == 0xfe) {
-				mdelay(50);
-			} else if (radiob_array_table[i] == 0xfd)
-				mdelay(5);
-			else if (radiob_array_table[i] == 0xfc)
-				mdelay(1);
-			else if (radiob_array_table[i] == 0xfb)
-				udelay(50);
-			else if (radiob_array_table[i] == 0xfa)
-				udelay(5);
-			else if (radiob_array_table[i] == 0xf9)
-				udelay(1);
-			else {
-				rtl_set_rfreg(hw, rfpath, radiob_array_table[i],
-					      RFREG_OFFSET_MASK,
-					      radiob_array_table[i + 1]);
-				udelay(1);
-			}
+			rtl_rfreg_delay(hw, rfpath, radiob_array_table[i],
+					RFREG_OFFSET_MASK,
+					radiob_array_table[i + 1]);
 		}
 		break;
 	case RF90_PATH_C:
@@ -344,6 +293,8 @@ bool rtl92cu_phy_config_rf_with_headerfile(struct ieee80211_hw *hw,
 		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
 			 "switch case not processed\n");
 		break;
+	default:
+		break;
 	}
 	return true;
 }
diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/dm.c b/drivers/net/wireless/rtlwifi/rtl8192de/dm.c
index 7908e1c85819..304c443b89b2 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192de/dm.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192de/dm.c
@@ -194,15 +194,15 @@ static void rtl92d_dm_false_alarm_counter_statistics(struct ieee80211_hw *hw)
 	rtl_set_bbreg(hw, ROFDM0_LSTF, BIT(31), 1); /* hold page C counter */
 	rtl_set_bbreg(hw, ROFDM1_LSTF, BIT(31), 1); /*hold page D counter */
 
-	ret_value = rtl_get_bbreg(hw, ROFDM0_FRAMESYNC, BMASKDWORD);
+	ret_value = rtl_get_bbreg(hw, ROFDM0_FRAMESYNC, MASKDWORD);
 	falsealm_cnt->cnt_fast_fsync_fail = (ret_value & 0xffff);
 	falsealm_cnt->cnt_sb_search_fail = ((ret_value & 0xffff0000) >> 16);
-	ret_value = rtl_get_bbreg(hw, ROFDM_PHYCOUNTER1, BMASKDWORD);
+	ret_value = rtl_get_bbreg(hw, ROFDM_PHYCOUNTER1, MASKDWORD);
 	falsealm_cnt->cnt_parity_fail = ((ret_value & 0xffff0000) >> 16);
-	ret_value = rtl_get_bbreg(hw, ROFDM_PHYCOUNTER2, BMASKDWORD);
+	ret_value = rtl_get_bbreg(hw, ROFDM_PHYCOUNTER2, MASKDWORD);
 	falsealm_cnt->cnt_rate_illegal = (ret_value & 0xffff);
 	falsealm_cnt->cnt_crc8_fail = ((ret_value & 0xffff0000) >> 16);
-	ret_value = rtl_get_bbreg(hw, ROFDM_PHYCOUNTER3, BMASKDWORD);
+	ret_value = rtl_get_bbreg(hw, ROFDM_PHYCOUNTER3, MASKDWORD);
 	falsealm_cnt->cnt_mcs_fail = (ret_value & 0xffff);
 	falsealm_cnt->cnt_ofdm_fail = falsealm_cnt->cnt_parity_fail +
 				      falsealm_cnt->cnt_rate_illegal +
@@ -214,9 +214,9 @@ static void rtl92d_dm_false_alarm_counter_statistics(struct ieee80211_hw *hw)
 	if (rtlpriv->rtlhal.current_bandtype != BAND_ON_5G) {
 		/* hold cck counter */
 		rtl92d_acquire_cckandrw_pagea_ctl(hw, &flag);
-		ret_value = rtl_get_bbreg(hw, RCCK0_FACOUNTERLOWER, BMASKBYTE0);
+		ret_value = rtl_get_bbreg(hw, RCCK0_FACOUNTERLOWER, MASKBYTE0);
 		falsealm_cnt->cnt_cck_fail = ret_value;
-		ret_value = rtl_get_bbreg(hw, RCCK0_FACOUNTERUPPER, BMASKBYTE3);
+		ret_value = rtl_get_bbreg(hw, RCCK0_FACOUNTERUPPER, MASKBYTE3);
 		falsealm_cnt->cnt_cck_fail += (ret_value & 0xff) << 8;
 		rtl92d_release_cckandrw_pagea_ctl(hw, &flag);
 	} else {
@@ -331,11 +331,11 @@ static void rtl92d_dm_cck_packet_detection_thresh(struct ieee80211_hw *hw)
 	if (de_digtable->pre_cck_pd_state != de_digtable->cur_cck_pd_state) {
 		if (de_digtable->cur_cck_pd_state == CCK_PD_STAGE_LOWRSSI) {
 			rtl92d_acquire_cckandrw_pagea_ctl(hw, &flag);
-			rtl_set_bbreg(hw, RCCK0_CCA, BMASKBYTE2, 0x83);
+			rtl_set_bbreg(hw, RCCK0_CCA, MASKBYTE2, 0x83);
 			rtl92d_release_cckandrw_pagea_ctl(hw, &flag);
 		} else {
 			rtl92d_acquire_cckandrw_pagea_ctl(hw, &flag);
-			rtl_set_bbreg(hw, RCCK0_CCA, BMASKBYTE2, 0xcd);
+			rtl_set_bbreg(hw, RCCK0_CCA, MASKBYTE2, 0xcd);
 			rtl92d_release_cckandrw_pagea_ctl(hw, &flag);
 		}
 		de_digtable->pre_cck_pd_state = de_digtable->cur_cck_pd_state;
@@ -722,7 +722,7 @@ static void rtl92d_dm_rxgain_tracking_thermalmeter(struct ieee80211_hw *hw)
 	RT_TRACE(rtlpriv, COMP_POWER_TRACKING, DBG_LOUD,
 		 "===> Rx Gain %x\n", u4tmp);
 	for (i = RF90_PATH_A; i < rtlpriv->phy.num_total_rfpath; i++)
-		rtl_set_rfreg(hw, i, 0x3C, BRFREGOFFSETMASK,
+		rtl_set_rfreg(hw, i, 0x3C, RFREG_OFFSET_MASK,
 			      (rtlpriv->phy.reg_rf3c[i] & (~(0xF000))) | u4tmp);
 }
 
@@ -737,7 +737,7 @@ static void rtl92d_bandtype_2_4G(struct ieee80211_hw *hw, long *temp_cckg,
 	/* Query CCK default setting From 0xa24 */
 	rtl92d_acquire_cckandrw_pagea_ctl(hw, &flag);
 	temp_cck = rtl_get_bbreg(hw, RCCK0_TXFILTER2,
-				 BMASKDWORD) & BMASKCCK;
+				 MASKDWORD) & MASKCCK;
 	rtl92d_release_cckandrw_pagea_ctl(hw, &flag);
 	for (i = 0; i < CCK_TABLE_LENGTH; i++) {
 		if (rtlpriv->dm.cck_inch14) {
@@ -896,9 +896,9 @@ static void rtl92d_dm_txpower_tracking_callback_thermalmeter(
 		rf = 1;
 	if (thermalvalue) {
 		ele_d = rtl_get_bbreg(hw, ROFDM0_XATxIQIMBALANCE,
-				      BMASKDWORD) & BMASKOFDM_D;
+				      MASKDWORD) & MASKOFDM_D;
 		for (i = 0; i < OFDM_TABLE_SIZE_92D; i++) {
-			if (ele_d == (ofdmswing_table[i] & BMASKOFDM_D)) {
+			if (ele_d == (ofdmswing_table[i] & MASKOFDM_D)) {
 				ofdm_index_old[0] = (u8) i;
 
 				RT_TRACE(rtlpriv, COMP_POWER_TRACKING, DBG_LOUD,
@@ -910,10 +910,10 @@ static void rtl92d_dm_txpower_tracking_callback_thermalmeter(
 		}
 		if (is2t) {
 			ele_d = rtl_get_bbreg(hw, ROFDM0_XBTxIQIMBALANCE,
-					      BMASKDWORD) & BMASKOFDM_D;
+					      MASKDWORD) & MASKOFDM_D;
 			for (i = 0; i < OFDM_TABLE_SIZE_92D; i++) {
 				if (ele_d ==
-				    (ofdmswing_table[i] & BMASKOFDM_D)) {
+				    (ofdmswing_table[i] & MASKOFDM_D)) {
 					ofdm_index_old[1] = (u8) i;
 					RT_TRACE(rtlpriv, COMP_POWER_TRACKING,
 						 DBG_LOUD,
@@ -1091,10 +1091,10 @@ static void rtl92d_dm_txpower_tracking_callback_thermalmeter(
 				value32 = (ele_d << 22) | ((ele_c & 0x3F) <<
 					  16) | ele_a;
 				rtl_set_bbreg(hw, ROFDM0_XATxIQIMBALANCE,
-					      BMASKDWORD, value32);
+					      MASKDWORD, value32);
 
 				value32 = (ele_c & 0x000003C0) >> 6;
-				rtl_set_bbreg(hw, ROFDM0_XCTxAFE, BMASKH4BITS,
+				rtl_set_bbreg(hw, ROFDM0_XCTxAFE, MASKH4BITS,
 					      value32);
 
 				value32 = ((val_x * ele_d) >> 7) & 0x01;
@@ -1103,10 +1103,10 @@ static void rtl92d_dm_txpower_tracking_callback_thermalmeter(
 
 			} else {
 				rtl_set_bbreg(hw, ROFDM0_XATxIQIMBALANCE,
-					      BMASKDWORD,
+					      MASKDWORD,
 					      ofdmswing_table
 					      [(u8)ofdm_index[0]]);
-				rtl_set_bbreg(hw, ROFDM0_XCTxAFE, BMASKH4BITS,
+				rtl_set_bbreg(hw, ROFDM0_XCTxAFE, MASKH4BITS,
 					      0x00);
 				rtl_set_bbreg(hw, ROFDM0_ECCATHRESHOLD,
 					      BIT(24), 0x00);
@@ -1204,21 +1204,21 @@ static void rtl92d_dm_txpower_tracking_callback_thermalmeter(
 						  ele_a;
 					rtl_set_bbreg(hw,
 						      ROFDM0_XBTxIQIMBALANCE,
-						      BMASKDWORD, value32);
+						      MASKDWORD, value32);
 					value32 = (ele_c & 0x000003C0) >> 6;
 					rtl_set_bbreg(hw, ROFDM0_XDTxAFE,
-						      BMASKH4BITS, value32);
+						      MASKH4BITS, value32);
 					value32 = ((val_x * ele_d) >> 7) & 0x01;
 					rtl_set_bbreg(hw, ROFDM0_ECCATHRESHOLD,
 						      BIT(28), value32);
 				} else {
 					rtl_set_bbreg(hw,
 						      ROFDM0_XBTxIQIMBALANCE,
-						      BMASKDWORD,
+						      MASKDWORD,
 						      ofdmswing_table
 						      [(u8) ofdm_index[1]]);
 					rtl_set_bbreg(hw, ROFDM0_XDTxAFE,
-						      BMASKH4BITS, 0x00);
+						      MASKH4BITS, 0x00);
 					rtl_set_bbreg(hw, ROFDM0_ECCATHRESHOLD,
 						      BIT(28), 0x00);
 				}
@@ -1229,10 +1229,10 @@ static void rtl92d_dm_txpower_tracking_callback_thermalmeter(
 			}
 			RT_TRACE(rtlpriv, COMP_POWER_TRACKING, DBG_LOUD,
 				 "TxPwrTracking 0xc80 = 0x%x, 0xc94 = 0x%x RF 0x24 = 0x%x\n",
-				 rtl_get_bbreg(hw, 0xc80, BMASKDWORD),
-				 rtl_get_bbreg(hw, 0xc94, BMASKDWORD),
+				 rtl_get_bbreg(hw, 0xc80, MASKDWORD),
+				 rtl_get_bbreg(hw, 0xc94, MASKDWORD),
 				 rtl_get_rfreg(hw, RF90_PATH_A, 0x24,
-					       BRFREGOFFSETMASK));
+					       RFREG_OFFSET_MASK));
 		}
 		if ((delta_iqk > rtlefuse->delta_iqk) &&
 		    (rtlefuse->delta_iqk != 0)) {
diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/hw.c b/drivers/net/wireless/rtlwifi/rtl8192de/hw.c
index c9f6ee7e1765..2b08671004a0 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192de/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192de/hw.c
@@ -985,9 +985,9 @@ int rtl92de_hw_init(struct ieee80211_hw *hw)
 	/* set default value after initialize RF,  */
 	rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER4, 0x00f00000, 0);
 	rtlphy->rfreg_chnlval[0] = rtl_get_rfreg(hw, (enum radio_path)0,
-			RF_CHNLBW, BRFREGOFFSETMASK);
+			RF_CHNLBW, RFREG_OFFSET_MASK);
 	rtlphy->rfreg_chnlval[1] = rtl_get_rfreg(hw, (enum radio_path)1,
-			RF_CHNLBW, BRFREGOFFSETMASK);
+			RF_CHNLBW, RFREG_OFFSET_MASK);
 
 	/*---- Set CCK and OFDM Block "ON"----*/
 	if (rtlhal->current_bandtype == BAND_ON_2_4G)
@@ -1035,7 +1035,7 @@ int rtl92de_hw_init(struct ieee80211_hw *hw)
 
 				tmp_rega = rtl_get_rfreg(hw,
 						  (enum radio_path)RF90_PATH_A,
-						  0x2a, BMASKDWORD);
+						  0x2a, MASKDWORD);
 
 				if (((tmp_rega & BIT(11)) == BIT(11)))
 					break;
@@ -1334,13 +1334,13 @@ void rtl92de_card_disable(struct ieee80211_hw *hw)
 	/* c. ========RF OFF sequence==========  */
 	/* 0x88c[23:20] = 0xf. */
 	rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER4, 0x00f00000, 0xf);
-	rtl_set_rfreg(hw, RF90_PATH_A, 0x00, BRFREGOFFSETMASK, 0x00);
+	rtl_set_rfreg(hw, RF90_PATH_A, 0x00, RFREG_OFFSET_MASK, 0x00);
 
 	/* APSD_CTRL 0x600[7:0] = 0x40 */
 	rtl_write_byte(rtlpriv, REG_APSD_CTRL, 0x40);
 
 	/* Close antenna 0,0xc04,0xd04 */
-	rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE, BMASKBYTE0, 0);
+	rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE, MASKBYTE0, 0);
 	rtl_set_bbreg(hw, ROFDM1_TRXPATHENABLE, BDWORD, 0);
 
 	/*  SYS_FUNC_EN 0x02[7:0] = 0xE2   reset BB state machine */
diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/phy.c b/drivers/net/wireless/rtlwifi/rtl8192de/phy.c
index 13196cc4b1d3..3d1f0dd4e52d 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192de/phy.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192de/phy.c
@@ -30,6 +30,7 @@
 #include "../wifi.h"
 #include "../pci.h"
 #include "../ps.h"
+#include "../core.h"
 #include "reg.h"
 #include "def.h"
 #include "phy.h"
@@ -242,7 +243,7 @@ void rtl92d_phy_set_bb_reg(struct ieee80211_hw *hw,
 	else if (rtlhal->during_mac0init_radiob)
 		/* mac0 use phy1 write radio_b. */
 		dbi_direct = BIT(3) | BIT(2);
-	if (bitmask != BMASKDWORD) {
+	if (bitmask != MASKDWORD) {
 		if (rtlhal->during_mac1init_radioa ||
 		    rtlhal->during_mac0init_radiob)
 			originalvalue = rtl92de_read_dword_dbi(hw,
@@ -275,20 +276,20 @@ static u32 _rtl92d_phy_rf_serial_read(struct ieee80211_hw *hw,
 	u32 retvalue;
 
 	newoffset = offset;
-	tmplong = rtl_get_bbreg(hw, RFPGA0_XA_HSSIPARAMETER2, BMASKDWORD);
+	tmplong = rtl_get_bbreg(hw, RFPGA0_XA_HSSIPARAMETER2, MASKDWORD);
 	if (rfpath == RF90_PATH_A)
 		tmplong2 = tmplong;
 	else
-		tmplong2 = rtl_get_bbreg(hw, pphyreg->rfhssi_para2, BMASKDWORD);
+		tmplong2 = rtl_get_bbreg(hw, pphyreg->rfhssi_para2, MASKDWORD);
 	tmplong2 = (tmplong2 & (~BLSSIREADADDRESS)) |
 		(newoffset << 23) | BLSSIREADEDGE;
-	rtl_set_bbreg(hw, RFPGA0_XA_HSSIPARAMETER2, BMASKDWORD,
+	rtl_set_bbreg(hw, RFPGA0_XA_HSSIPARAMETER2, MASKDWORD,
 		tmplong & (~BLSSIREADEDGE));
 	udelay(10);
-	rtl_set_bbreg(hw, pphyreg->rfhssi_para2, BMASKDWORD, tmplong2);
+	rtl_set_bbreg(hw, pphyreg->rfhssi_para2, MASKDWORD, tmplong2);
 	udelay(50);
 	udelay(50);
-	rtl_set_bbreg(hw, RFPGA0_XA_HSSIPARAMETER2, BMASKDWORD,
+	rtl_set_bbreg(hw, RFPGA0_XA_HSSIPARAMETER2, MASKDWORD,
 		tmplong | BLSSIREADEDGE);
 	udelay(10);
 	if (rfpath == RF90_PATH_A)
@@ -321,7 +322,7 @@ static void _rtl92d_phy_rf_serial_write(struct ieee80211_hw *hw,
 	newoffset = offset;
 	/* T65 RF */
 	data_and_addr = ((newoffset << 20) | (data & 0x000fffff)) & 0x0fffffff;
-	rtl_set_bbreg(hw, pphyreg->rf3wire_offset, BMASKDWORD, data_and_addr);
+	rtl_set_bbreg(hw, pphyreg->rf3wire_offset, MASKDWORD, data_and_addr);
 	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, "RFW-%d Addr[0x%x]=0x%x\n",
 		 rfpath, pphyreg->rf3wire_offset, data_and_addr);
 }
@@ -362,7 +363,7 @@ void rtl92d_phy_set_rf_reg(struct ieee80211_hw *hw, enum radio_path rfpath,
 		return;
 	spin_lock_irqsave(&rtlpriv->locks.rf_lock, flags);
 	if (rtlphy->rf_mode != RF_OP_BY_FW) {
-		if (bitmask != BRFREGOFFSETMASK) {
+		if (bitmask != RFREG_OFFSET_MASK) {
 			original_value = _rtl92d_phy_rf_serial_read(hw,
 				rfpath, regaddr);
 			bitshift = _rtl92d_phy_calculate_bit_shift(bitmask);
@@ -567,19 +568,8 @@ static bool _rtl92d_phy_config_bb_with_headerfile(struct ieee80211_hw *hw,
 		 " ===> phy:Rtl819XPHY_REG_Array_PG\n");
 	if (configtype == BASEBAND_CONFIG_PHY_REG) {
 		for (i = 0; i < phy_reg_arraylen; i = i + 2) {
-			if (phy_regarray_table[i] == 0xfe)
-				mdelay(50);
-			else if (phy_regarray_table[i] == 0xfd)
-				mdelay(5);
-			else if (phy_regarray_table[i] == 0xfc)
-				mdelay(1);
-			else if (phy_regarray_table[i] == 0xfb)
-				udelay(50);
-			else if (phy_regarray_table[i] == 0xfa)
-				udelay(5);
-			else if (phy_regarray_table[i] == 0xf9)
-				udelay(1);
-			rtl_set_bbreg(hw, phy_regarray_table[i], BMASKDWORD,
+			rtl_addr_delay(phy_regarray_table[i]);
+			rtl_set_bbreg(hw, phy_regarray_table[i], MASKDWORD,
 				      phy_regarray_table[i + 1]);
 			udelay(1);
 			RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
@@ -591,7 +581,7 @@ static bool _rtl92d_phy_config_bb_with_headerfile(struct ieee80211_hw *hw,
 		if (rtlhal->interfaceindex == 0) {
 			for (i = 0; i < agctab_arraylen; i = i + 2) {
 				rtl_set_bbreg(hw, agctab_array_table[i],
-					BMASKDWORD,
+					MASKDWORD,
 					agctab_array_table[i + 1]);
 				/* Add 1us delay between BB/RF register
 				 * setting. */
@@ -607,7 +597,7 @@ static bool _rtl92d_phy_config_bb_with_headerfile(struct ieee80211_hw *hw,
 			if (rtlhal->current_bandtype == BAND_ON_2_4G) {
 				for (i = 0; i < agctab_arraylen; i = i + 2) {
 					rtl_set_bbreg(hw, agctab_array_table[i],
-						BMASKDWORD,
+						MASKDWORD,
 						agctab_array_table[i + 1]);
 					/* Add 1us delay between BB/RF register
 					 * setting. */
@@ -623,7 +613,7 @@ static bool _rtl92d_phy_config_bb_with_headerfile(struct ieee80211_hw *hw,
 				for (i = 0; i < agctab_5garraylen; i = i + 2) {
 					rtl_set_bbreg(hw,
 						agctab_5garray_table[i],
-						BMASKDWORD,
+						MASKDWORD,
 						agctab_5garray_table[i + 1]);
 					/* Add 1us delay between BB/RF registeri
 					 * setting. */
@@ -705,18 +695,7 @@ static bool _rtl92d_phy_config_bb_with_pgheaderfile(struct ieee80211_hw *hw,
 	phy_regarray_table_pg = rtl8192de_phy_reg_array_pg;
 	if (configtype == BASEBAND_CONFIG_PHY_REG) {
 		for (i = 0; i < phy_regarray_pg_len; i = i + 3) {
-			if (phy_regarray_table_pg[i] == 0xfe)
-				mdelay(50);
-			else if (phy_regarray_table_pg[i] == 0xfd)
-				mdelay(5);
-			else if (phy_regarray_table_pg[i] == 0xfc)
-				mdelay(1);
-			else if (phy_regarray_table_pg[i] == 0xfb)
-				udelay(50);
-			else if (phy_regarray_table_pg[i] == 0xfa)
-				udelay(5);
-			else if (phy_regarray_table_pg[i] == 0xf9)
-				udelay(1);
+			rtl_addr_delay(phy_regarray_table_pg[i]);
 			_rtl92d_store_pwrindex_diffrate_offset(hw,
 				phy_regarray_table_pg[i],
 				phy_regarray_table_pg[i + 1],
@@ -843,54 +822,16 @@ bool rtl92d_phy_config_rf_with_headerfile(struct ieee80211_hw *hw,
 	switch (rfpath) {
 	case RF90_PATH_A:
 		for (i = 0; i < radioa_arraylen; i = i + 2) {
-			if (radioa_array_table[i] == 0xfe) {
-				mdelay(50);
-			} else if (radioa_array_table[i] == 0xfd) {
-				/* delay_ms(5); */
-				mdelay(5);
-			} else if (radioa_array_table[i] == 0xfc) {
-				/* delay_ms(1); */
-				mdelay(1);
-			} else if (radioa_array_table[i] == 0xfb) {
-				udelay(50);
-			} else if (radioa_array_table[i] == 0xfa) {
-				udelay(5);
-			} else if (radioa_array_table[i] == 0xf9) {
-				udelay(1);
-			} else {
-				rtl_set_rfreg(hw, rfpath, radioa_array_table[i],
-					      BRFREGOFFSETMASK,
-					      radioa_array_table[i + 1]);
-				/*  Add 1us delay between BB/RF register set. */
-				udelay(1);
-			}
+			rtl_rfreg_delay(hw, rfpath, radioa_array_table[i],
+					RFREG_OFFSET_MASK,
+					radioa_array_table[i + 1]);
 		}
 		break;
 	case RF90_PATH_B:
 		for (i = 0; i < radiob_arraylen; i = i + 2) {
-			if (radiob_array_table[i] == 0xfe) {
-				/* Delay specific ms. Only RF configuration
-				 * requires delay. */
-				mdelay(50);
-			} else if (radiob_array_table[i] == 0xfd) {
-				/* delay_ms(5); */
-				mdelay(5);
-			} else if (radiob_array_table[i] == 0xfc) {
-				/* delay_ms(1); */
-				mdelay(1);
-			} else if (radiob_array_table[i] == 0xfb) {
-				udelay(50);
-			} else if (radiob_array_table[i] == 0xfa) {
-				udelay(5);
-			} else if (radiob_array_table[i] == 0xf9) {
-				udelay(1);
-			} else {
-				rtl_set_rfreg(hw, rfpath, radiob_array_table[i],
-					      BRFREGOFFSETMASK,
-					      radiob_array_table[i + 1]);
-				/*  Add 1us delay between BB/RF register set. */
-				udelay(1);
-			}
+			rtl_rfreg_delay(hw, rfpath, radiob_array_table[i],
+					RFREG_OFFSET_MASK,
+					radiob_array_table[i + 1]);
 		}
 		break;
 	case RF90_PATH_C:
@@ -911,13 +852,13 @@ void rtl92d_phy_get_hw_reg_originalvalue(struct ieee80211_hw *hw)
 	struct rtl_phy *rtlphy = &(rtlpriv->phy);
 
 	rtlphy->default_initialgain[0] =
-	    (u8) rtl_get_bbreg(hw, ROFDM0_XAAGCCORE1, BMASKBYTE0);
+	    (u8) rtl_get_bbreg(hw, ROFDM0_XAAGCCORE1, MASKBYTE0);
 	rtlphy->default_initialgain[1] =
-	    (u8) rtl_get_bbreg(hw, ROFDM0_XBAGCCORE1, BMASKBYTE0);
+	    (u8) rtl_get_bbreg(hw, ROFDM0_XBAGCCORE1, MASKBYTE0);
 	rtlphy->default_initialgain[2] =
-	    (u8) rtl_get_bbreg(hw, ROFDM0_XCAGCCORE1, BMASKBYTE0);
+	    (u8) rtl_get_bbreg(hw, ROFDM0_XCAGCCORE1, MASKBYTE0);
 	rtlphy->default_initialgain[3] =
-	    (u8) rtl_get_bbreg(hw, ROFDM0_XDAGCCORE1, BMASKBYTE0);
+	    (u8) rtl_get_bbreg(hw, ROFDM0_XDAGCCORE1, MASKBYTE0);
 	RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
 		 "Default initial gain (c50=0x%x, c58=0x%x, c60=0x%x, c68=0x%x\n",
 		 rtlphy->default_initialgain[0],
@@ -925,9 +866,9 @@ void rtl92d_phy_get_hw_reg_originalvalue(struct ieee80211_hw *hw)
 		 rtlphy->default_initialgain[2],
 		 rtlphy->default_initialgain[3]);
 	rtlphy->framesync = (u8)rtl_get_bbreg(hw, ROFDM0_RXDETECTOR3,
-					      BMASKBYTE0);
+					      MASKBYTE0);
 	rtlphy->framesync_c34 = rtl_get_bbreg(hw, ROFDM0_RXDETECTOR2,
-					      BMASKDWORD);
+					      MASKDWORD);
 	RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
 		 "Default framesync (0x%x) = 0x%x\n",
 		 ROFDM0_RXDETECTOR3, rtlphy->framesync);
@@ -1106,7 +1047,7 @@ static void _rtl92d_phy_stop_trx_before_changeband(struct ieee80211_hw *hw)
 {
 	rtl_set_bbreg(hw, RFPGA0_RFMOD, BCCKEN, 0);
 	rtl_set_bbreg(hw, RFPGA0_RFMOD, BOFDMEN, 0);
-	rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE, BMASKBYTE0, 0x00);
+	rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE, MASKBYTE0, 0x00);
 	rtl_set_bbreg(hw, ROFDM1_TRXPATHENABLE, BDWORD, 0x0);
 }
 
@@ -1168,7 +1109,7 @@ static void _rtl92d_phy_reload_imr_setting(struct ieee80211_hw *hw,
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
 	u32 imr_num = MAX_RF_IMR_INDEX;
-	u32 rfmask = BRFREGOFFSETMASK;
+	u32 rfmask = RFREG_OFFSET_MASK;
 	u8 group, i;
 	unsigned long flag = 0;
 
@@ -1211,7 +1152,7 @@ static void _rtl92d_phy_reload_imr_setting(struct ieee80211_hw *hw,
 			for (i = 0; i < imr_num; i++) {
 				rtl_set_rfreg(hw, (enum radio_path)rfpath,
 					      rf_reg_for_5g_swchnl_normal[i],
-					      BRFREGOFFSETMASK,
+					      RFREG_OFFSET_MASK,
 					      rf_imr_param_normal[0][0][i]);
 			}
 			rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER4,
@@ -1329,7 +1270,7 @@ static void _rtl92d_phy_switch_rf_setting(struct ieee80211_hw *hw, u8 channel)
 			if (i == 0 && (rtlhal->macphymode == DUALMAC_DUALPHY)) {
 				rtl_set_rfreg(hw, (enum radio_path)path,
 					      rf_reg_for_c_cut_5g[i],
-					      BRFREGOFFSETMASK, 0xE439D);
+					      RFREG_OFFSET_MASK, 0xE439D);
 			} else if (rf_reg_for_c_cut_5g[i] == RF_SYN_G4) {
 				u4tmp2 = (rf_reg_pram_c_5g[index][i] &
 				     0x7FF) | (u4tmp << 11);
@@ -1337,11 +1278,11 @@ static void _rtl92d_phy_switch_rf_setting(struct ieee80211_hw *hw, u8 channel)
 					u4tmp2 &= ~(BIT(7) | BIT(6));
 				rtl_set_rfreg(hw, (enum radio_path)path,
 					      rf_reg_for_c_cut_5g[i],
-					      BRFREGOFFSETMASK, u4tmp2);
+					      RFREG_OFFSET_MASK, u4tmp2);
 			} else {
 				rtl_set_rfreg(hw, (enum radio_path)path,
 					      rf_reg_for_c_cut_5g[i],
-					      BRFREGOFFSETMASK,
+					      RFREG_OFFSET_MASK,
 					      rf_reg_pram_c_5g[index][i]);
 			}
 			RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE,
@@ -1351,7 +1292,7 @@ static void _rtl92d_phy_switch_rf_setting(struct ieee80211_hw *hw, u8 channel)
 				 path, index,
 				 rtl_get_rfreg(hw, (enum radio_path)path,
 					       rf_reg_for_c_cut_5g[i],
-					       BRFREGOFFSETMASK));
+					       RFREG_OFFSET_MASK));
 		}
 		if (need_pwr_down)
 			_rtl92d_phy_restore_rf_env(hw, path, &u4regvalue);
@@ -1381,7 +1322,7 @@ static void _rtl92d_phy_switch_rf_setting(struct ieee80211_hw *hw, u8 channel)
 				     i++) {
 					rtl_set_rfreg(hw, rfpath,
 						rf_for_c_cut_5g_internal_pa[i],
-						BRFREGOFFSETMASK,
+						RFREG_OFFSET_MASK,
 						rf_pram_c_5g_int_pa[index][i]);
 					RT_TRACE(rtlpriv, COMP_RF, DBG_LOUD,
 						 "offset 0x%x value 0x%x path %d index %d\n",
@@ -1422,13 +1363,13 @@ static void _rtl92d_phy_switch_rf_setting(struct ieee80211_hw *hw, u8 channel)
 			if (rf_reg_for_c_cut_2g[i] == RF_SYN_G7)
 				rtl_set_rfreg(hw, (enum radio_path)path,
 					rf_reg_for_c_cut_2g[i],
-					BRFREGOFFSETMASK,
+					RFREG_OFFSET_MASK,
 					(rf_reg_param_for_c_cut_2g[index][i] |
 					BIT(17)));
 			else
 				rtl_set_rfreg(hw, (enum radio_path)path,
 					      rf_reg_for_c_cut_2g[i],
-					      BRFREGOFFSETMASK,
+					      RFREG_OFFSET_MASK,
 					      rf_reg_param_for_c_cut_2g
 					      [index][i]);
 			RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE,
@@ -1438,14 +1379,14 @@ static void _rtl92d_phy_switch_rf_setting(struct ieee80211_hw *hw, u8 channel)
 				 rf_reg_mask_for_c_cut_2g[i], path, index,
 				 rtl_get_rfreg(hw, (enum radio_path)path,
 					       rf_reg_for_c_cut_2g[i],
-					       BRFREGOFFSETMASK));
+					       RFREG_OFFSET_MASK));
 		}
 		RTPRINT(rtlpriv, FINIT, INIT_IQK,
 			"cosa ver 3 set RF-B, 2G, 0x28 = 0x%x !!\n",
 			rf_syn_g4_for_c_cut_2g | (u4tmp << 11));
 
 		rtl_set_rfreg(hw, (enum radio_path)path, RF_SYN_G4,
-			      BRFREGOFFSETMASK,
+			      RFREG_OFFSET_MASK,
 			      rf_syn_g4_for_c_cut_2g | (u4tmp << 11));
 		if (need_pwr_down)
 			_rtl92d_phy_restore_rf_env(hw, path, &u4regvalue);
@@ -1493,41 +1434,41 @@ static u8 _rtl92d_phy_patha_iqk(struct ieee80211_hw *hw, bool configpathb)
 	/* path-A IQK setting */
 	RTPRINT(rtlpriv, FINIT, INIT_IQK,  "Path-A IQK setting!\n");
 	if (rtlhal->interfaceindex == 0) {
-		rtl_set_bbreg(hw, 0xe30, BMASKDWORD, 0x10008c1f);
-		rtl_set_bbreg(hw, 0xe34, BMASKDWORD, 0x10008c1f);
+		rtl_set_bbreg(hw, 0xe30, MASKDWORD, 0x10008c1f);
+		rtl_set_bbreg(hw, 0xe34, MASKDWORD, 0x10008c1f);
 	} else {
-		rtl_set_bbreg(hw, 0xe30, BMASKDWORD, 0x10008c22);
-		rtl_set_bbreg(hw, 0xe34, BMASKDWORD, 0x10008c22);
+		rtl_set_bbreg(hw, 0xe30, MASKDWORD, 0x10008c22);
+		rtl_set_bbreg(hw, 0xe34, MASKDWORD, 0x10008c22);
 	}
-	rtl_set_bbreg(hw, 0xe38, BMASKDWORD, 0x82140102);
-	rtl_set_bbreg(hw, 0xe3c, BMASKDWORD, 0x28160206);
+	rtl_set_bbreg(hw, 0xe38, MASKDWORD, 0x82140102);
+	rtl_set_bbreg(hw, 0xe3c, MASKDWORD, 0x28160206);
 	/* path-B IQK setting */
 	if (configpathb) {
-		rtl_set_bbreg(hw, 0xe50, BMASKDWORD, 0x10008c22);
-		rtl_set_bbreg(hw, 0xe54, BMASKDWORD, 0x10008c22);
-		rtl_set_bbreg(hw, 0xe58, BMASKDWORD, 0x82140102);
-		rtl_set_bbreg(hw, 0xe5c, BMASKDWORD, 0x28160206);
+		rtl_set_bbreg(hw, 0xe50, MASKDWORD, 0x10008c22);
+		rtl_set_bbreg(hw, 0xe54, MASKDWORD, 0x10008c22);
+		rtl_set_bbreg(hw, 0xe58, MASKDWORD, 0x82140102);
+		rtl_set_bbreg(hw, 0xe5c, MASKDWORD, 0x28160206);
 	}
 	/* LO calibration setting */
 	RTPRINT(rtlpriv, FINIT, INIT_IQK,  "LO calibration setting!\n");
-	rtl_set_bbreg(hw, 0xe4c, BMASKDWORD, 0x00462911);
+	rtl_set_bbreg(hw, 0xe4c, MASKDWORD, 0x00462911);
 	/* One shot, path A LOK & IQK */
 	RTPRINT(rtlpriv, FINIT, INIT_IQK,  "One shot, path A LOK & IQK!\n");
-	rtl_set_bbreg(hw, 0xe48, BMASKDWORD, 0xf9000000);
-	rtl_set_bbreg(hw, 0xe48, BMASKDWORD, 0xf8000000);
+	rtl_set_bbreg(hw, 0xe48, MASKDWORD, 0xf9000000);
+	rtl_set_bbreg(hw, 0xe48, MASKDWORD, 0xf8000000);
 	/* delay x ms */
 	RTPRINT(rtlpriv, FINIT, INIT_IQK,
 		"Delay %d ms for One shot, path A LOK & IQK\n",
 		IQK_DELAY_TIME);
 	mdelay(IQK_DELAY_TIME);
 	/* Check failed */
-	regeac = rtl_get_bbreg(hw, 0xeac, BMASKDWORD);
+	regeac = rtl_get_bbreg(hw, 0xeac, MASKDWORD);
 	RTPRINT(rtlpriv, FINIT, INIT_IQK,  "0xeac = 0x%x\n", regeac);
-	rege94 = rtl_get_bbreg(hw, 0xe94, BMASKDWORD);
+	rege94 = rtl_get_bbreg(hw, 0xe94, MASKDWORD);
 	RTPRINT(rtlpriv, FINIT, INIT_IQK,  "0xe94 = 0x%x\n", rege94);
-	rege9c = rtl_get_bbreg(hw, 0xe9c, BMASKDWORD);
+	rege9c = rtl_get_bbreg(hw, 0xe9c, MASKDWORD);
 	RTPRINT(rtlpriv, FINIT, INIT_IQK,  "0xe9c = 0x%x\n", rege9c);
-	regea4 = rtl_get_bbreg(hw, 0xea4, BMASKDWORD);
+	regea4 = rtl_get_bbreg(hw, 0xea4, MASKDWORD);
 	RTPRINT(rtlpriv, FINIT, INIT_IQK,  "0xea4 = 0x%x\n", regea4);
 	if (!(regeac & BIT(28)) && (((rege94 & 0x03FF0000) >> 16) != 0x142) &&
 	    (((rege9c & 0x03FF0000) >> 16) != 0x42))
@@ -1563,42 +1504,42 @@ static u8 _rtl92d_phy_patha_iqk_5g_normal(struct ieee80211_hw *hw,
 	RTPRINT(rtlpriv, FINIT, INIT_IQK,  "Path A IQK!\n");
 	/* path-A IQK setting */
 	RTPRINT(rtlpriv, FINIT, INIT_IQK,  "Path-A IQK setting!\n");
-	rtl_set_bbreg(hw, 0xe30, BMASKDWORD, 0x18008c1f);
-	rtl_set_bbreg(hw, 0xe34, BMASKDWORD, 0x18008c1f);
-	rtl_set_bbreg(hw, 0xe38, BMASKDWORD, 0x82140307);
-	rtl_set_bbreg(hw, 0xe3c, BMASKDWORD, 0x68160960);
+	rtl_set_bbreg(hw, 0xe30, MASKDWORD, 0x18008c1f);
+	rtl_set_bbreg(hw, 0xe34, MASKDWORD, 0x18008c1f);
+	rtl_set_bbreg(hw, 0xe38, MASKDWORD, 0x82140307);
+	rtl_set_bbreg(hw, 0xe3c, MASKDWORD, 0x68160960);
 	/* path-B IQK setting */
 	if (configpathb) {
-		rtl_set_bbreg(hw, 0xe50, BMASKDWORD, 0x18008c2f);
-		rtl_set_bbreg(hw, 0xe54, BMASKDWORD, 0x18008c2f);
-		rtl_set_bbreg(hw, 0xe58, BMASKDWORD, 0x82110000);
-		rtl_set_bbreg(hw, 0xe5c, BMASKDWORD, 0x68110000);
+		rtl_set_bbreg(hw, 0xe50, MASKDWORD, 0x18008c2f);
+		rtl_set_bbreg(hw, 0xe54, MASKDWORD, 0x18008c2f);
+		rtl_set_bbreg(hw, 0xe58, MASKDWORD, 0x82110000);
+		rtl_set_bbreg(hw, 0xe5c, MASKDWORD, 0x68110000);
 	}
 	/* LO calibration setting */
 	RTPRINT(rtlpriv, FINIT, INIT_IQK,  "LO calibration setting!\n");
-	rtl_set_bbreg(hw, 0xe4c, BMASKDWORD, 0x00462911);
+	rtl_set_bbreg(hw, 0xe4c, MASKDWORD, 0x00462911);
 	/* path-A PA on */
-	rtl_set_bbreg(hw, RFPGA0_XAB_RFINTERFACESW, BMASKDWORD, 0x07000f60);
-	rtl_set_bbreg(hw, RFPGA0_XA_RFINTERFACEOE, BMASKDWORD, 0x66e60e30);
+	rtl_set_bbreg(hw, RFPGA0_XAB_RFINTERFACESW, MASKDWORD, 0x07000f60);
+	rtl_set_bbreg(hw, RFPGA0_XA_RFINTERFACEOE, MASKDWORD, 0x66e60e30);
 	for (i = 0; i < retrycount; i++) {
 		/* One shot, path A LOK & IQK */
 		RTPRINT(rtlpriv, FINIT, INIT_IQK,
 			"One shot, path A LOK & IQK!\n");
-		rtl_set_bbreg(hw, 0xe48, BMASKDWORD, 0xf9000000);
-		rtl_set_bbreg(hw, 0xe48, BMASKDWORD, 0xf8000000);
+		rtl_set_bbreg(hw, 0xe48, MASKDWORD, 0xf9000000);
+		rtl_set_bbreg(hw, 0xe48, MASKDWORD, 0xf8000000);
 		/* delay x ms */
 		RTPRINT(rtlpriv, FINIT, INIT_IQK,
 			"Delay %d ms for One shot, path A LOK & IQK.\n",
 			IQK_DELAY_TIME);
 		mdelay(IQK_DELAY_TIME * 10);
 		/* Check failed */
-		regeac = rtl_get_bbreg(hw, 0xeac, BMASKDWORD);
+		regeac = rtl_get_bbreg(hw, 0xeac, MASKDWORD);
 		RTPRINT(rtlpriv, FINIT, INIT_IQK,  "0xeac = 0x%x\n", regeac);
-		rege94 = rtl_get_bbreg(hw, 0xe94, BMASKDWORD);
+		rege94 = rtl_get_bbreg(hw, 0xe94, MASKDWORD);
 		RTPRINT(rtlpriv, FINIT, INIT_IQK,  "0xe94 = 0x%x\n", rege94);
-		rege9c = rtl_get_bbreg(hw, 0xe9c, BMASKDWORD);
+		rege9c = rtl_get_bbreg(hw, 0xe9c, MASKDWORD);
 		RTPRINT(rtlpriv, FINIT, INIT_IQK,  "0xe9c = 0x%x\n", rege9c);
-		regea4 = rtl_get_bbreg(hw, 0xea4, BMASKDWORD);
+		regea4 = rtl_get_bbreg(hw, 0xea4, MASKDWORD);
 		RTPRINT(rtlpriv, FINIT, INIT_IQK,  "0xea4 = 0x%x\n", regea4);
 		if (!(regeac & TxOKBit) &&
 		     (((rege94 & 0x03FF0000) >> 16) != 0x142)) {
@@ -1620,9 +1561,9 @@ static u8 _rtl92d_phy_patha_iqk_5g_normal(struct ieee80211_hw *hw,
 		}
 	}
 	/* path A PA off */
-	rtl_set_bbreg(hw, RFPGA0_XAB_RFINTERFACESW, BMASKDWORD,
+	rtl_set_bbreg(hw, RFPGA0_XAB_RFINTERFACESW, MASKDWORD,
 		      rtlphy->iqk_bb_backup[0]);
-	rtl_set_bbreg(hw, RFPGA0_XA_RFINTERFACEOE, BMASKDWORD,
+	rtl_set_bbreg(hw, RFPGA0_XA_RFINTERFACEOE, MASKDWORD,
 		      rtlphy->iqk_bb_backup[1]);
 	return result;
 }
@@ -1637,22 +1578,22 @@ static u8 _rtl92d_phy_pathb_iqk(struct ieee80211_hw *hw)
 	RTPRINT(rtlpriv, FINIT, INIT_IQK,  "Path B IQK!\n");
 	/* One shot, path B LOK & IQK */
 	RTPRINT(rtlpriv, FINIT, INIT_IQK,  "One shot, path A LOK & IQK!\n");
-	rtl_set_bbreg(hw, 0xe60, BMASKDWORD, 0x00000002);
-	rtl_set_bbreg(hw, 0xe60, BMASKDWORD, 0x00000000);
+	rtl_set_bbreg(hw, 0xe60, MASKDWORD, 0x00000002);
+	rtl_set_bbreg(hw, 0xe60, MASKDWORD, 0x00000000);
 	/* delay x ms  */
 	RTPRINT(rtlpriv, FINIT, INIT_IQK,
 		"Delay %d ms for One shot, path B LOK & IQK\n", IQK_DELAY_TIME);
 	mdelay(IQK_DELAY_TIME);
 	/* Check failed */
-	regeac = rtl_get_bbreg(hw, 0xeac, BMASKDWORD);
+	regeac = rtl_get_bbreg(hw, 0xeac, MASKDWORD);
 	RTPRINT(rtlpriv, FINIT, INIT_IQK,  "0xeac = 0x%x\n", regeac);
-	regeb4 = rtl_get_bbreg(hw, 0xeb4, BMASKDWORD);
+	regeb4 = rtl_get_bbreg(hw, 0xeb4, MASKDWORD);
 	RTPRINT(rtlpriv, FINIT, INIT_IQK,  "0xeb4 = 0x%x\n", regeb4);
-	regebc = rtl_get_bbreg(hw, 0xebc, BMASKDWORD);
+	regebc = rtl_get_bbreg(hw, 0xebc, MASKDWORD);
 	RTPRINT(rtlpriv, FINIT, INIT_IQK,  "0xebc = 0x%x\n", regebc);
-	regec4 = rtl_get_bbreg(hw, 0xec4, BMASKDWORD);
+	regec4 = rtl_get_bbreg(hw, 0xec4, MASKDWORD);
 	RTPRINT(rtlpriv, FINIT, INIT_IQK,  "0xec4 = 0x%x\n", regec4);
-	regecc = rtl_get_bbreg(hw, 0xecc, BMASKDWORD);
+	regecc = rtl_get_bbreg(hw, 0xecc, MASKDWORD);
 	RTPRINT(rtlpriv, FINIT, INIT_IQK,  "0xecc = 0x%x\n", regecc);
 	if (!(regeac & BIT(31)) && (((regeb4 & 0x03FF0000) >> 16) != 0x142) &&
 	    (((regebc & 0x03FF0000) >> 16) != 0x42))
@@ -1680,31 +1621,31 @@ static u8 _rtl92d_phy_pathb_iqk_5g_normal(struct ieee80211_hw *hw)
 	RTPRINT(rtlpriv, FINIT, INIT_IQK,  "Path B IQK!\n");
 	/* path-A IQK setting */
 	RTPRINT(rtlpriv, FINIT, INIT_IQK,  "Path-A IQK setting!\n");
-	rtl_set_bbreg(hw, 0xe30, BMASKDWORD, 0x18008c1f);
-	rtl_set_bbreg(hw, 0xe34, BMASKDWORD, 0x18008c1f);
-	rtl_set_bbreg(hw, 0xe38, BMASKDWORD, 0x82110000);
-	rtl_set_bbreg(hw, 0xe3c, BMASKDWORD, 0x68110000);
+	rtl_set_bbreg(hw, 0xe30, MASKDWORD, 0x18008c1f);
+	rtl_set_bbreg(hw, 0xe34, MASKDWORD, 0x18008c1f);
+	rtl_set_bbreg(hw, 0xe38, MASKDWORD, 0x82110000);
+	rtl_set_bbreg(hw, 0xe3c, MASKDWORD, 0x68110000);
 
 	/* path-B IQK setting */
-	rtl_set_bbreg(hw, 0xe50, BMASKDWORD, 0x18008c2f);
-	rtl_set_bbreg(hw, 0xe54, BMASKDWORD, 0x18008c2f);
-	rtl_set_bbreg(hw, 0xe58, BMASKDWORD, 0x82140307);
-	rtl_set_bbreg(hw, 0xe5c, BMASKDWORD, 0x68160960);
+	rtl_set_bbreg(hw, 0xe50, MASKDWORD, 0x18008c2f);
+	rtl_set_bbreg(hw, 0xe54, MASKDWORD, 0x18008c2f);
+	rtl_set_bbreg(hw, 0xe58, MASKDWORD, 0x82140307);
+	rtl_set_bbreg(hw, 0xe5c, MASKDWORD, 0x68160960);
 
 	/* LO calibration setting */
 	RTPRINT(rtlpriv, FINIT, INIT_IQK,  "LO calibration setting!\n");
-	rtl_set_bbreg(hw, 0xe4c, BMASKDWORD, 0x00462911);
+	rtl_set_bbreg(hw, 0xe4c, MASKDWORD, 0x00462911);
 
 	/* path-B PA on */
-	rtl_set_bbreg(hw, RFPGA0_XAB_RFINTERFACESW, BMASKDWORD, 0x0f600700);
-	rtl_set_bbreg(hw, RFPGA0_XB_RFINTERFACEOE, BMASKDWORD, 0x061f0d30);
+	rtl_set_bbreg(hw, RFPGA0_XAB_RFINTERFACESW, MASKDWORD, 0x0f600700);
+	rtl_set_bbreg(hw, RFPGA0_XB_RFINTERFACEOE, MASKDWORD, 0x061f0d30);
 
 	for (i = 0; i < retrycount; i++) {
 		/* One shot, path B LOK & IQK */
 		RTPRINT(rtlpriv, FINIT, INIT_IQK,
 			"One shot, path A LOK & IQK!\n");
-		rtl_set_bbreg(hw, 0xe48, BMASKDWORD, 0xfa000000);
-		rtl_set_bbreg(hw, 0xe48, BMASKDWORD, 0xf8000000);
+		rtl_set_bbreg(hw, 0xe48, MASKDWORD, 0xfa000000);
+		rtl_set_bbreg(hw, 0xe48, MASKDWORD, 0xf8000000);
 
 		/* delay x ms */
 		RTPRINT(rtlpriv, FINIT, INIT_IQK,
@@ -1712,15 +1653,15 @@ static u8 _rtl92d_phy_pathb_iqk_5g_normal(struct ieee80211_hw *hw)
 		mdelay(IQK_DELAY_TIME * 10);
 
 		/* Check failed */
-		regeac = rtl_get_bbreg(hw, 0xeac, BMASKDWORD);
+		regeac = rtl_get_bbreg(hw, 0xeac, MASKDWORD);
 		RTPRINT(rtlpriv, FINIT, INIT_IQK,  "0xeac = 0x%x\n", regeac);
-		regeb4 = rtl_get_bbreg(hw, 0xeb4, BMASKDWORD);
+		regeb4 = rtl_get_bbreg(hw, 0xeb4, MASKDWORD);
 		RTPRINT(rtlpriv, FINIT, INIT_IQK,  "0xeb4 = 0x%x\n", regeb4);
-		regebc = rtl_get_bbreg(hw, 0xebc, BMASKDWORD);
+		regebc = rtl_get_bbreg(hw, 0xebc, MASKDWORD);
 		RTPRINT(rtlpriv, FINIT, INIT_IQK,  "0xebc = 0x%x\n", regebc);
-		regec4 = rtl_get_bbreg(hw, 0xec4, BMASKDWORD);
+		regec4 = rtl_get_bbreg(hw, 0xec4, MASKDWORD);
 		RTPRINT(rtlpriv, FINIT, INIT_IQK,  "0xec4 = 0x%x\n", regec4);
-		regecc = rtl_get_bbreg(hw, 0xecc, BMASKDWORD);
+		regecc = rtl_get_bbreg(hw, 0xecc, MASKDWORD);
 		RTPRINT(rtlpriv, FINIT, INIT_IQK,  "0xecc = 0x%x\n", regecc);
 		if (!(regeac & BIT(31)) &&
 		    (((regeb4 & 0x03FF0000) >> 16) != 0x142))
@@ -1738,9 +1679,9 @@ static u8 _rtl92d_phy_pathb_iqk_5g_normal(struct ieee80211_hw *hw)
 	}
 
 	/* path B PA off */
-	rtl_set_bbreg(hw, RFPGA0_XAB_RFINTERFACESW, BMASKDWORD,
+	rtl_set_bbreg(hw, RFPGA0_XAB_RFINTERFACESW, MASKDWORD,
 		      rtlphy->iqk_bb_backup[0]);
-	rtl_set_bbreg(hw, RFPGA0_XB_RFINTERFACEOE, BMASKDWORD,
+	rtl_set_bbreg(hw, RFPGA0_XB_RFINTERFACEOE, MASKDWORD,
 		      rtlphy->iqk_bb_backup[2]);
 	return result;
 }
@@ -1754,7 +1695,7 @@ static void _rtl92d_phy_save_adda_registers(struct ieee80211_hw *hw,
 
 	RTPRINT(rtlpriv, FINIT, INIT_IQK,  "Save ADDA parameters.\n");
 	for (i = 0; i < regnum; i++)
-		adda_backup[i] = rtl_get_bbreg(hw, adda_reg[i], BMASKDWORD);
+		adda_backup[i] = rtl_get_bbreg(hw, adda_reg[i], MASKDWORD);
 }
 
 static void _rtl92d_phy_save_mac_registers(struct ieee80211_hw *hw,
@@ -1779,7 +1720,7 @@ static void _rtl92d_phy_reload_adda_registers(struct ieee80211_hw *hw,
 	RTPRINT(rtlpriv, FINIT, INIT_IQK,
 		"Reload ADDA power saving parameters !\n");
 	for (i = 0; i < regnum; i++)
-		rtl_set_bbreg(hw, adda_reg[i], BMASKDWORD, adda_backup[i]);
+		rtl_set_bbreg(hw, adda_reg[i], MASKDWORD, adda_backup[i]);
 }
 
 static void _rtl92d_phy_reload_mac_registers(struct ieee80211_hw *hw,
@@ -1807,7 +1748,7 @@ static void _rtl92d_phy_path_adda_on(struct ieee80211_hw *hw,
 		pathon = rtlpriv->rtlhal.interfaceindex == 0 ?
 		    0x04db25a4 : 0x0b1b25a4;
 	for (i = 0; i < IQK_ADDA_REG_NUM; i++)
-		rtl_set_bbreg(hw, adda_reg[i], BMASKDWORD, pathon);
+		rtl_set_bbreg(hw, adda_reg[i], MASKDWORD, pathon);
 }
 
 static void _rtl92d_phy_mac_setting_calibration(struct ieee80211_hw *hw,
@@ -1830,9 +1771,9 @@ static void _rtl92d_phy_patha_standby(struct ieee80211_hw *hw)
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
 	RTPRINT(rtlpriv, FINIT, INIT_IQK,  "Path-A standby mode!\n");
 
-	rtl_set_bbreg(hw, 0xe28, BMASKDWORD, 0x0);
-	rtl_set_bbreg(hw, RFPGA0_XA_LSSIPARAMETER, BMASKDWORD, 0x00010000);
-	rtl_set_bbreg(hw, 0xe28, BMASKDWORD, 0x80800000);
+	rtl_set_bbreg(hw, 0xe28, MASKDWORD, 0x0);
+	rtl_set_bbreg(hw, RFPGA0_XA_LSSIPARAMETER, MASKDWORD, 0x00010000);
+	rtl_set_bbreg(hw, 0xe28, MASKDWORD, 0x80800000);
 }
 
 static void _rtl92d_phy_pimode_switch(struct ieee80211_hw *hw, bool pi_mode)
@@ -1843,8 +1784,8 @@ static void _rtl92d_phy_pimode_switch(struct ieee80211_hw *hw, bool pi_mode)
 	RTPRINT(rtlpriv, FINIT, INIT_IQK,
 		"BB Switch to %s mode!\n", pi_mode ? "PI" : "SI");
 	mode = pi_mode ? 0x01000100 : 0x01000000;
-	rtl_set_bbreg(hw, 0x820, BMASKDWORD, mode);
-	rtl_set_bbreg(hw, 0x828, BMASKDWORD, mode);
+	rtl_set_bbreg(hw, 0x820, MASKDWORD, mode);
+	rtl_set_bbreg(hw, 0x828, MASKDWORD, mode);
 }
 
 static void _rtl92d_phy_iq_calibrate(struct ieee80211_hw *hw, long result[][8],
@@ -1875,7 +1816,7 @@ static void _rtl92d_phy_iq_calibrate(struct ieee80211_hw *hw, long result[][8],
 
 	RTPRINT(rtlpriv, FINIT, INIT_IQK,  "IQK for 2.4G :Start!!!\n");
 	if (t == 0) {
-		bbvalue = rtl_get_bbreg(hw, RFPGA0_RFMOD, BMASKDWORD);
+		bbvalue = rtl_get_bbreg(hw, RFPGA0_RFMOD, MASKDWORD);
 		RTPRINT(rtlpriv, FINIT, INIT_IQK,  "==>0x%08x\n", bbvalue);
 		RTPRINT(rtlpriv, FINIT, INIT_IQK, "IQ Calibration for %s\n",
 			is2t ? "2T2R" : "1T1R");
@@ -1898,40 +1839,40 @@ static void _rtl92d_phy_iq_calibrate(struct ieee80211_hw *hw, long result[][8],
 		_rtl92d_phy_pimode_switch(hw, true);
 
 	rtl_set_bbreg(hw, RFPGA0_RFMOD, BIT(24), 0x00);
-	rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE, BMASKDWORD, 0x03a05600);
-	rtl_set_bbreg(hw, ROFDM0_TRMUXPAR, BMASKDWORD, 0x000800e4);
-	rtl_set_bbreg(hw, RFPGA0_XCD_RFINTERFACESW, BMASKDWORD, 0x22204000);
+	rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE, MASKDWORD, 0x03a05600);
+	rtl_set_bbreg(hw, ROFDM0_TRMUXPAR, MASKDWORD, 0x000800e4);
+	rtl_set_bbreg(hw, RFPGA0_XCD_RFINTERFACESW, MASKDWORD, 0x22204000);
 	rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER4, 0xf00000, 0x0f);
 	if (is2t) {
-		rtl_set_bbreg(hw, RFPGA0_XA_LSSIPARAMETER, BMASKDWORD,
+		rtl_set_bbreg(hw, RFPGA0_XA_LSSIPARAMETER, MASKDWORD,
 			      0x00010000);
-		rtl_set_bbreg(hw, RFPGA0_XB_LSSIPARAMETER, BMASKDWORD,
+		rtl_set_bbreg(hw, RFPGA0_XB_LSSIPARAMETER, MASKDWORD,
 			      0x00010000);
 	}
 	/* MAC settings */
 	_rtl92d_phy_mac_setting_calibration(hw, iqk_mac_reg,
 					    rtlphy->iqk_mac_backup);
 	/* Page B init */
-	rtl_set_bbreg(hw, 0xb68, BMASKDWORD, 0x0f600000);
+	rtl_set_bbreg(hw, 0xb68, MASKDWORD, 0x0f600000);
 	if (is2t)
-		rtl_set_bbreg(hw, 0xb6c, BMASKDWORD, 0x0f600000);
+		rtl_set_bbreg(hw, 0xb6c, MASKDWORD, 0x0f600000);
 	/* IQ calibration setting */
 	RTPRINT(rtlpriv, FINIT, INIT_IQK,  "IQK setting!\n");
-	rtl_set_bbreg(hw, 0xe28, BMASKDWORD, 0x80800000);
-	rtl_set_bbreg(hw, 0xe40, BMASKDWORD, 0x01007c00);
-	rtl_set_bbreg(hw, 0xe44, BMASKDWORD, 0x01004800);
+	rtl_set_bbreg(hw, 0xe28, MASKDWORD, 0x80800000);
+	rtl_set_bbreg(hw, 0xe40, MASKDWORD, 0x01007c00);
+	rtl_set_bbreg(hw, 0xe44, MASKDWORD, 0x01004800);
 	for (i = 0; i < retrycount; i++) {
 		patha_ok = _rtl92d_phy_patha_iqk(hw, is2t);
 		if (patha_ok == 0x03) {
 			RTPRINT(rtlpriv, FINIT, INIT_IQK,
 				"Path A IQK Success!!\n");
-			result[t][0] = (rtl_get_bbreg(hw, 0xe94, BMASKDWORD) &
+			result[t][0] = (rtl_get_bbreg(hw, 0xe94, MASKDWORD) &
 					0x3FF0000) >> 16;
-			result[t][1] = (rtl_get_bbreg(hw, 0xe9c, BMASKDWORD) &
+			result[t][1] = (rtl_get_bbreg(hw, 0xe9c, MASKDWORD) &
 					0x3FF0000) >> 16;
-			result[t][2] = (rtl_get_bbreg(hw, 0xea4, BMASKDWORD) &
+			result[t][2] = (rtl_get_bbreg(hw, 0xea4, MASKDWORD) &
 					0x3FF0000) >> 16;
-			result[t][3] = (rtl_get_bbreg(hw, 0xeac, BMASKDWORD) &
+			result[t][3] = (rtl_get_bbreg(hw, 0xeac, MASKDWORD) &
 					0x3FF0000) >> 16;
 			break;
 		} else if (i == (retrycount - 1) && patha_ok == 0x01) {
@@ -1939,9 +1880,9 @@ static void _rtl92d_phy_iq_calibrate(struct ieee80211_hw *hw, long result[][8],
 			RTPRINT(rtlpriv, FINIT, INIT_IQK,
 				"Path A IQK Only  Tx Success!!\n");
 
-			result[t][0] = (rtl_get_bbreg(hw, 0xe94, BMASKDWORD) &
+			result[t][0] = (rtl_get_bbreg(hw, 0xe94, MASKDWORD) &
 					0x3FF0000) >> 16;
-			result[t][1] = (rtl_get_bbreg(hw, 0xe9c, BMASKDWORD) &
+			result[t][1] = (rtl_get_bbreg(hw, 0xe9c, MASKDWORD) &
 					0x3FF0000) >> 16;
 		}
 	}
@@ -1957,22 +1898,22 @@ static void _rtl92d_phy_iq_calibrate(struct ieee80211_hw *hw, long result[][8],
 				RTPRINT(rtlpriv, FINIT, INIT_IQK,
 					"Path B IQK Success!!\n");
 				result[t][4] = (rtl_get_bbreg(hw, 0xeb4,
-					       BMASKDWORD) & 0x3FF0000) >> 16;
+					       MASKDWORD) & 0x3FF0000) >> 16;
 				result[t][5] = (rtl_get_bbreg(hw, 0xebc,
-					       BMASKDWORD) & 0x3FF0000) >> 16;
+					       MASKDWORD) & 0x3FF0000) >> 16;
 				result[t][6] = (rtl_get_bbreg(hw, 0xec4,
-					       BMASKDWORD) & 0x3FF0000) >> 16;
+					       MASKDWORD) & 0x3FF0000) >> 16;
 				result[t][7] = (rtl_get_bbreg(hw, 0xecc,
-					       BMASKDWORD) & 0x3FF0000) >> 16;
+					       MASKDWORD) & 0x3FF0000) >> 16;
 				break;
 			} else if (i == (retrycount - 1) && pathb_ok == 0x01) {
 				/* Tx IQK OK */
 				RTPRINT(rtlpriv, FINIT, INIT_IQK,
 					"Path B Only Tx IQK Success!!\n");
 				result[t][4] = (rtl_get_bbreg(hw, 0xeb4,
-					       BMASKDWORD) & 0x3FF0000) >> 16;
+					       MASKDWORD) & 0x3FF0000) >> 16;
 				result[t][5] = (rtl_get_bbreg(hw, 0xebc,
-					       BMASKDWORD) & 0x3FF0000) >> 16;
+					       MASKDWORD) & 0x3FF0000) >> 16;
 			}
 		}
 		if (0x00 == pathb_ok)
@@ -1984,7 +1925,7 @@ static void _rtl92d_phy_iq_calibrate(struct ieee80211_hw *hw, long result[][8],
 	RTPRINT(rtlpriv, FINIT, INIT_IQK,
 		"IQK:Back to BB mode, load original value!\n");
 
-	rtl_set_bbreg(hw, 0xe28, BMASKDWORD, 0);
+	rtl_set_bbreg(hw, 0xe28, MASKDWORD, 0);
 	if (t != 0) {
 		/* Switch back BB to SI mode after finish IQ Calibration. */
 		if (!rtlphy->rfpi_enable)
@@ -2004,8 +1945,8 @@ static void _rtl92d_phy_iq_calibrate(struct ieee80211_hw *hw, long result[][8],
 							  rtlphy->iqk_bb_backup,
 							  IQK_BB_REG_NUM - 1);
 		/* load 0xe30 IQC default value */
-		rtl_set_bbreg(hw, 0xe30, BMASKDWORD, 0x01008c00);
-		rtl_set_bbreg(hw, 0xe34, BMASKDWORD, 0x01008c00);
+		rtl_set_bbreg(hw, 0xe30, MASKDWORD, 0x01008c00);
+		rtl_set_bbreg(hw, 0xe34, MASKDWORD, 0x01008c00);
 	}
 	RTPRINT(rtlpriv, FINIT, INIT_IQK,  "<==\n");
 }
@@ -2042,7 +1983,7 @@ static void _rtl92d_phy_iq_calibrate_5g_normal(struct ieee80211_hw *hw,
 	RTPRINT(rtlpriv, FINIT, INIT_IQK,  "IQK for 5G NORMAL:Start!!!\n");
 	mdelay(IQK_DELAY_TIME * 20);
 	if (t == 0) {
-		bbvalue = rtl_get_bbreg(hw, RFPGA0_RFMOD, BMASKDWORD);
+		bbvalue = rtl_get_bbreg(hw, RFPGA0_RFMOD, MASKDWORD);
 		RTPRINT(rtlpriv, FINIT, INIT_IQK,  "==>0x%08x\n", bbvalue);
 		RTPRINT(rtlpriv, FINIT, INIT_IQK, "IQ Calibration for %s\n",
 			is2t ? "2T2R" : "1T1R");
@@ -2072,38 +2013,38 @@ static void _rtl92d_phy_iq_calibrate_5g_normal(struct ieee80211_hw *hw,
 	if (!rtlphy->rfpi_enable)
 		_rtl92d_phy_pimode_switch(hw, true);
 	rtl_set_bbreg(hw, RFPGA0_RFMOD, BIT(24), 0x00);
-	rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE, BMASKDWORD, 0x03a05600);
-	rtl_set_bbreg(hw, ROFDM0_TRMUXPAR, BMASKDWORD, 0x000800e4);
-	rtl_set_bbreg(hw, RFPGA0_XCD_RFINTERFACESW, BMASKDWORD, 0x22208000);
+	rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE, MASKDWORD, 0x03a05600);
+	rtl_set_bbreg(hw, ROFDM0_TRMUXPAR, MASKDWORD, 0x000800e4);
+	rtl_set_bbreg(hw, RFPGA0_XCD_RFINTERFACESW, MASKDWORD, 0x22208000);
 	rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER4, 0xf00000, 0x0f);
 
 	/* Page B init */
-	rtl_set_bbreg(hw, 0xb68, BMASKDWORD, 0x0f600000);
+	rtl_set_bbreg(hw, 0xb68, MASKDWORD, 0x0f600000);
 	if (is2t)
-		rtl_set_bbreg(hw, 0xb6c, BMASKDWORD, 0x0f600000);
+		rtl_set_bbreg(hw, 0xb6c, MASKDWORD, 0x0f600000);
 	/* IQ calibration setting  */
 	RTPRINT(rtlpriv, FINIT, INIT_IQK,  "IQK setting!\n");
-	rtl_set_bbreg(hw, 0xe28, BMASKDWORD, 0x80800000);
-	rtl_set_bbreg(hw, 0xe40, BMASKDWORD, 0x10007c00);
-	rtl_set_bbreg(hw, 0xe44, BMASKDWORD, 0x01004800);
+	rtl_set_bbreg(hw, 0xe28, MASKDWORD, 0x80800000);
+	rtl_set_bbreg(hw, 0xe40, MASKDWORD, 0x10007c00);
+	rtl_set_bbreg(hw, 0xe44, MASKDWORD, 0x01004800);
 	patha_ok = _rtl92d_phy_patha_iqk_5g_normal(hw, is2t);
 	if (patha_ok == 0x03) {
 		RTPRINT(rtlpriv, FINIT, INIT_IQK,  "Path A IQK Success!!\n");
-		result[t][0] = (rtl_get_bbreg(hw, 0xe94, BMASKDWORD) &
+		result[t][0] = (rtl_get_bbreg(hw, 0xe94, MASKDWORD) &
 				0x3FF0000) >> 16;
-		result[t][1] = (rtl_get_bbreg(hw, 0xe9c, BMASKDWORD) &
+		result[t][1] = (rtl_get_bbreg(hw, 0xe9c, MASKDWORD) &
 				0x3FF0000) >> 16;
-		result[t][2] = (rtl_get_bbreg(hw, 0xea4, BMASKDWORD) &
+		result[t][2] = (rtl_get_bbreg(hw, 0xea4, MASKDWORD) &
 				0x3FF0000) >> 16;
-		result[t][3] = (rtl_get_bbreg(hw, 0xeac, BMASKDWORD) &
+		result[t][3] = (rtl_get_bbreg(hw, 0xeac, MASKDWORD) &
 				0x3FF0000) >> 16;
 	} else if (patha_ok == 0x01) {	/* Tx IQK OK */
 		RTPRINT(rtlpriv, FINIT, INIT_IQK,
 			"Path A IQK Only  Tx Success!!\n");
 
-		result[t][0] = (rtl_get_bbreg(hw, 0xe94, BMASKDWORD) &
+		result[t][0] = (rtl_get_bbreg(hw, 0xe94, MASKDWORD) &
 				0x3FF0000) >> 16;
-		result[t][1] = (rtl_get_bbreg(hw, 0xe9c, BMASKDWORD) &
+		result[t][1] = (rtl_get_bbreg(hw, 0xe9c, MASKDWORD) &
 				0x3FF0000) >> 16;
 	} else {
 		RTPRINT(rtlpriv, FINIT, INIT_IQK,  "Path A IQK Fail!!\n");
@@ -2116,20 +2057,20 @@ static void _rtl92d_phy_iq_calibrate_5g_normal(struct ieee80211_hw *hw,
 		if (pathb_ok == 0x03) {
 			RTPRINT(rtlpriv, FINIT, INIT_IQK,
 				"Path B IQK Success!!\n");
-			result[t][4] = (rtl_get_bbreg(hw, 0xeb4, BMASKDWORD) &
+			result[t][4] = (rtl_get_bbreg(hw, 0xeb4, MASKDWORD) &
 			     0x3FF0000) >> 16;
-			result[t][5] = (rtl_get_bbreg(hw, 0xebc, BMASKDWORD) &
+			result[t][5] = (rtl_get_bbreg(hw, 0xebc, MASKDWORD) &
 			     0x3FF0000) >> 16;
-			result[t][6] = (rtl_get_bbreg(hw, 0xec4, BMASKDWORD) &
+			result[t][6] = (rtl_get_bbreg(hw, 0xec4, MASKDWORD) &
 			     0x3FF0000) >> 16;
-			result[t][7] = (rtl_get_bbreg(hw, 0xecc, BMASKDWORD) &
+			result[t][7] = (rtl_get_bbreg(hw, 0xecc, MASKDWORD) &
 			     0x3FF0000) >> 16;
 		} else if (pathb_ok == 0x01) { /* Tx IQK OK */
 			RTPRINT(rtlpriv, FINIT, INIT_IQK,
 				"Path B Only Tx IQK Success!!\n");
-			result[t][4] = (rtl_get_bbreg(hw, 0xeb4, BMASKDWORD) &
+			result[t][4] = (rtl_get_bbreg(hw, 0xeb4, MASKDWORD) &
 			     0x3FF0000) >> 16;
-			result[t][5] = (rtl_get_bbreg(hw, 0xebc, BMASKDWORD) &
+			result[t][5] = (rtl_get_bbreg(hw, 0xebc, MASKDWORD) &
 			     0x3FF0000) >> 16;
 		} else {
 			RTPRINT(rtlpriv, FINIT, INIT_IQK,
@@ -2140,7 +2081,7 @@ static void _rtl92d_phy_iq_calibrate_5g_normal(struct ieee80211_hw *hw,
 	/* Back to BB mode, load original value */
 	RTPRINT(rtlpriv, FINIT, INIT_IQK,
 		"IQK:Back to BB mode, load original value!\n");
-	rtl_set_bbreg(hw, 0xe28, BMASKDWORD, 0);
+	rtl_set_bbreg(hw, 0xe28, MASKDWORD, 0);
 	if (t != 0) {
 		if (is2t)
 			_rtl92d_phy_reload_adda_registers(hw, iqk_bb_reg,
@@ -2240,7 +2181,7 @@ static void _rtl92d_phy_patha_fill_iqk_matrix(struct ieee80211_hw *hw,
 		return;
 	} else if (iqk_ok) {
 		oldval_0 = (rtl_get_bbreg(hw, ROFDM0_XATxIQIMBALANCE,
-			BMASKDWORD) >> 22) & 0x3FF;	/* OFDM0_D */
+			MASKDWORD) >> 22) & 0x3FF;	/* OFDM0_D */
 		val_x = result[final_candidate][0];
 		if ((val_x & 0x00000200) != 0)
 			val_x = val_x | 0xFFFFFC00;
@@ -2271,7 +2212,7 @@ static void _rtl92d_phy_patha_fill_iqk_matrix(struct ieee80211_hw *hw,
 				      ((val_y * oldval_0 >> 7) & 0x1));
 		RTPRINT(rtlpriv, FINIT, INIT_IQK, "0xC80 = 0x%x\n",
 			rtl_get_bbreg(hw, ROFDM0_XATxIQIMBALANCE,
-				      BMASKDWORD));
+				      MASKDWORD));
 		if (txonly) {
 			RTPRINT(rtlpriv, FINIT, INIT_IQK,  "only Tx OK\n");
 			return;
@@ -2299,7 +2240,7 @@ static void _rtl92d_phy_pathb_fill_iqk_matrix(struct ieee80211_hw *hw,
 		return;
 	} else if (iqk_ok) {
 		oldval_1 = (rtl_get_bbreg(hw, ROFDM0_XBTxIQIMBALANCE,
-					  BMASKDWORD) >> 22) & 0x3FF;
+					  MASKDWORD) >> 22) & 0x3FF;
 		val_x = result[final_candidate][4];
 		if ((val_x & 0x00000200) != 0)
 			val_x = val_x | 0xFFFFFC00;
@@ -2657,7 +2598,7 @@ static void _rtl92d_phy_lc_calibrate_sw(struct ieee80211_hw *hw, bool is2t)
 		rf_mode[index] = rtl_read_byte(rtlpriv, offset);
 		/* 2. Set RF mode = standby mode */
 		rtl_set_rfreg(hw, (enum radio_path)index, RF_AC,
-			      BRFREGOFFSETMASK, 0x010000);
+			      RFREG_OFFSET_MASK, 0x010000);
 		if (rtlpci->init_ready) {
 			/* switch CV-curve control by LC-calibration */
 			rtl_set_rfreg(hw, (enum radio_path)index, RF_SYN_G7,
@@ -2667,16 +2608,16 @@ static void _rtl92d_phy_lc_calibrate_sw(struct ieee80211_hw *hw, bool is2t)
 				      0x08000, 0x01);
 		}
 		u4tmp = rtl_get_rfreg(hw, (enum radio_path)index, RF_SYN_G6,
-				  BRFREGOFFSETMASK);
+				  RFREG_OFFSET_MASK);
 		while ((!(u4tmp & BIT(11))) && timecount <= timeout) {
 			mdelay(50);
 			timecount += 50;
 			u4tmp = rtl_get_rfreg(hw, (enum radio_path)index,
-					      RF_SYN_G6, BRFREGOFFSETMASK);
+					      RF_SYN_G6, RFREG_OFFSET_MASK);
 		}
 		RTPRINT(rtlpriv, FINIT, INIT_IQK,
 			"PHY_LCK finish delay for %d ms=2\n", timecount);
-		u4tmp = rtl_get_rfreg(hw, index, RF_SYN_G4, BRFREGOFFSETMASK);
+		u4tmp = rtl_get_rfreg(hw, index, RF_SYN_G4, RFREG_OFFSET_MASK);
 		if (index == 0 && rtlhal->interfaceindex == 0) {
 			RTPRINT(rtlpriv, FINIT, INIT_IQK,
 				"path-A / 5G LCK\n");
@@ -2696,9 +2637,9 @@ static void _rtl92d_phy_lc_calibrate_sw(struct ieee80211_hw *hw, bool is2t)
 				      0x7f, i);
 
 			rtl_set_rfreg(hw, (enum radio_path)index, 0x4D,
-				BRFREGOFFSETMASK, 0x0);
+				RFREG_OFFSET_MASK, 0x0);
 			readval = rtl_get_rfreg(hw, (enum radio_path)index,
-					  0x4F, BRFREGOFFSETMASK);
+					  0x4F, RFREG_OFFSET_MASK);
 			curvecount_val[2 * i + 1] = (readval & 0xfffe0) >> 5;
 			/* reg 0x4f [4:0] */
 			/* reg 0x50 [19:10] */
@@ -2912,7 +2853,7 @@ static bool _rtl92d_phy_sw_chnl_step_by_step(struct ieee80211_hw *hw,
 				}
 				rtl_set_rfreg(hw, (enum radio_path)rfpath,
 					      currentcmd->para1,
-					      BRFREGOFFSETMASK,
+					      RFREG_OFFSET_MASK,
 					      rtlphy->rfreg_chnlval[rfpath]);
 				_rtl92d_phy_reload_imr_setting(hw, channel,
 							       rfpath);
@@ -2960,7 +2901,7 @@ u8 rtl92d_phy_sw_chnl(struct ieee80211_hw *hw)
 	if (rtlhal->macphymode == SINGLEMAC_SINGLEPHY &&
 	    rtlhal->bandset == BAND_ON_BOTH) {
 		ret_value = rtl_get_bbreg(hw, RFPGA0_XAB_RFPARAMETER,
-					  BMASKDWORD);
+					  MASKDWORD);
 		if (rtlphy->current_channel > 14 && !(ret_value & BIT(0)))
 			rtl92d_phy_switch_wirelessband(hw, BAND_ON_5G);
 		else if (rtlphy->current_channel <= 14 && (ret_value & BIT(0)))
@@ -3112,7 +3053,7 @@ static void _rtl92d_phy_set_rfsleep(struct ieee80211_hw *hw)
 	/* a.   TXPAUSE 0x522[7:0] = 0xFF  Pause MAC TX queue  */
 	rtl_write_byte(rtlpriv, REG_TXPAUSE, 0xFF);
 	/* b.   RF path 0 offset 0x00 = 0x00  disable RF  */
-	rtl_set_rfreg(hw, RF90_PATH_A, 0x00, BRFREGOFFSETMASK, 0x00);
+	rtl_set_rfreg(hw, RF90_PATH_A, 0x00, RFREG_OFFSET_MASK, 0x00);
 	/* c.   APSD_CTRL 0x600[7:0] = 0x40 */
 	rtl_write_byte(rtlpriv, REG_APSD_CTRL, 0x40);
 	/* d. APSD_CTRL 0x600[7:0] = 0x00
@@ -3120,12 +3061,12 @@ static void _rtl92d_phy_set_rfsleep(struct ieee80211_hw *hw)
 	 * RF path 0 offset 0x00 = 0x00
 	 * APSD_CTRL 0x600[7:0] = 0x40
 	 * */
-	u4btmp = rtl_get_rfreg(hw, RF90_PATH_A, 0, BRFREGOFFSETMASK);
+	u4btmp = rtl_get_rfreg(hw, RF90_PATH_A, 0, RFREG_OFFSET_MASK);
 	while (u4btmp != 0 && delay > 0) {
 		rtl_write_byte(rtlpriv, REG_APSD_CTRL, 0x0);
-		rtl_set_rfreg(hw, RF90_PATH_A, 0x00, BRFREGOFFSETMASK, 0x00);
+		rtl_set_rfreg(hw, RF90_PATH_A, 0x00, RFREG_OFFSET_MASK, 0x00);
 		rtl_write_byte(rtlpriv, REG_APSD_CTRL, 0x40);
-		u4btmp = rtl_get_rfreg(hw, RF90_PATH_A, 0, BRFREGOFFSETMASK);
+		u4btmp = rtl_get_rfreg(hw, RF90_PATH_A, 0, RFREG_OFFSET_MASK);
 		delay--;
 	}
 	if (delay == 0) {
@@ -3468,9 +3409,9 @@ void rtl92d_update_bbrf_configuration(struct ieee80211_hw *hw)
 		/* 5G LAN ON */
 		rtl_set_bbreg(hw, 0xB30, 0x00F00000, 0xa);
 		/* TX BB gain shift*1,Just for testchip,0xc80,0xc88 */
-		rtl_set_bbreg(hw, ROFDM0_XATxIQIMBALANCE, BMASKDWORD,
+		rtl_set_bbreg(hw, ROFDM0_XATxIQIMBALANCE, MASKDWORD,
 			      0x40000100);
-		rtl_set_bbreg(hw, ROFDM0_XBTxIQIMBALANCE, BMASKDWORD,
+		rtl_set_bbreg(hw, ROFDM0_XBTxIQIMBALANCE, MASKDWORD,
 			      0x40000100);
 		if (rtlhal->macphymode == DUALMAC_DUALPHY) {
 			rtl_set_bbreg(hw, RFPGA0_XAB_RFINTERFACESW,
@@ -3524,16 +3465,16 @@ void rtl92d_update_bbrf_configuration(struct ieee80211_hw *hw)
 		rtl_set_bbreg(hw, 0xB30, 0x00F00000, 0x0);
 		/* TX BB gain shift,Just for testchip,0xc80,0xc88 */
 		if (rtlefuse->internal_pa_5g[0])
-			rtl_set_bbreg(hw, ROFDM0_XATxIQIMBALANCE, BMASKDWORD,
+			rtl_set_bbreg(hw, ROFDM0_XATxIQIMBALANCE, MASKDWORD,
 				      0x2d4000b5);
 		else
-			rtl_set_bbreg(hw, ROFDM0_XATxIQIMBALANCE, BMASKDWORD,
+			rtl_set_bbreg(hw, ROFDM0_XATxIQIMBALANCE, MASKDWORD,
 				      0x20000080);
 		if (rtlefuse->internal_pa_5g[1])
-			rtl_set_bbreg(hw, ROFDM0_XBTxIQIMBALANCE, BMASKDWORD,
+			rtl_set_bbreg(hw, ROFDM0_XBTxIQIMBALANCE, MASKDWORD,
 				      0x2d4000b5);
 		else
-			rtl_set_bbreg(hw, ROFDM0_XBTxIQIMBALANCE, BMASKDWORD,
+			rtl_set_bbreg(hw, ROFDM0_XBTxIQIMBALANCE, MASKDWORD,
 				      0x20000080);
 		if (rtlhal->macphymode == DUALMAC_DUALPHY) {
 			rtl_set_bbreg(hw, RFPGA0_XAB_RFINTERFACESW,
@@ -3560,8 +3501,8 @@ void rtl92d_update_bbrf_configuration(struct ieee80211_hw *hw)
 		}
 	}
 	/* update IQK related settings */
-	rtl_set_bbreg(hw, ROFDM0_XARXIQIMBALANCE, BMASKDWORD, 0x40000100);
-	rtl_set_bbreg(hw, ROFDM0_XBRXIQIMBALANCE, BMASKDWORD, 0x40000100);
+	rtl_set_bbreg(hw, ROFDM0_XARXIQIMBALANCE, MASKDWORD, 0x40000100);
+	rtl_set_bbreg(hw, ROFDM0_XBRXIQIMBALANCE, MASKDWORD, 0x40000100);
 	rtl_set_bbreg(hw, ROFDM0_XCTxAFE, 0xF0000000, 0x00);
 	rtl_set_bbreg(hw, ROFDM0_ECCATHRESHOLD, BIT(30) | BIT(28) |
 		      BIT(26) | BIT(24), 0x00);
@@ -3590,7 +3531,7 @@ void rtl92d_update_bbrf_configuration(struct ieee80211_hw *hw)
 	/* DMDP */
 	if (rtlphy->rf_type == RF_1T1R) {
 		/* Use antenna 0,0xc04,0xd04 */
-		rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE, BMASKBYTE0, 0x11);
+		rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE, MASKBYTE0, 0x11);
 		rtl_set_bbreg(hw, ROFDM1_TRXPATHENABLE, BDWORD, 0x1);
 
 		/* enable ad/da clock1 for dual-phy reg0x888 */
@@ -3612,7 +3553,7 @@ void rtl92d_update_bbrf_configuration(struct ieee80211_hw *hw)
 	} else {
 		/* Single PHY */
 		/* Use antenna 0 & 1,0xc04,0xd04 */
-		rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE, BMASKBYTE0, 0x33);
+		rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE, MASKBYTE0, 0x33);
 		rtl_set_bbreg(hw, ROFDM1_TRXPATHENABLE, BDWORD, 0x3);
 		/* disable ad/da clock1,0x888 */
 		rtl_set_bbreg(hw, RFPGA0_ADDALLOCKEN, BIT(12) | BIT(13), 0);
@@ -3620,9 +3561,9 @@ void rtl92d_update_bbrf_configuration(struct ieee80211_hw *hw)
 	for (rfpath = RF90_PATH_A; rfpath < rtlphy->num_total_rfpath;
 	     rfpath++) {
 		rtlphy->rfreg_chnlval[rfpath] = rtl_get_rfreg(hw, rfpath,
-						RF_CHNLBW, BRFREGOFFSETMASK);
+						RF_CHNLBW, RFREG_OFFSET_MASK);
 		rtlphy->reg_rf3c[rfpath] = rtl_get_rfreg(hw, rfpath, 0x3C,
-			BRFREGOFFSETMASK);
+			RFREG_OFFSET_MASK);
 	}
 	for (i = 0; i < 2; i++)
 		RT_TRACE(rtlpriv, COMP_RF, DBG_LOUD, "RF 0x18 = 0x%x\n",
diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/reg.h b/drivers/net/wireless/rtlwifi/rtl8192de/reg.h
index b7498c5bafc5..7f29b8d765b3 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192de/reg.h
+++ b/drivers/net/wireless/rtlwifi/rtl8192de/reg.h
@@ -1295,18 +1295,4 @@
 #define	BWORD1					0xc
 #define	BDWORD					0xf
 
-#define	BMASKBYTE0				0xff
-#define	BMASKBYTE1				0xff00
-#define	BMASKBYTE2				0xff0000
-#define	BMASKBYTE3				0xff000000
-#define	BMASKHWORD				0xffff0000
-#define	BMASKLWORD				0x0000ffff
-#define	BMASKDWORD				0xffffffff
-#define	BMASK12BITS				0xfff
-#define	BMASKH4BITS				0xf0000000
-#define BMASKOFDM_D				0xffc00000
-#define	BMASKCCK				0x3f3f3f3f
-
-#define BRFREGOFFSETMASK			0xfffff
-
 #endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/rf.c b/drivers/net/wireless/rtlwifi/rtl8192de/rf.c
index 20144e0b4142..6a6ac540d5b5 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192de/rf.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192de/rf.c
@@ -125,7 +125,7 @@ void rtl92d_phy_rf6052_set_cck_txpower(struct ieee80211_hw *hw,
 	}
 
 	tmpval = tx_agc[RF90_PATH_A] & 0xff;
-	rtl_set_bbreg(hw, RTXAGC_A_CCK1_MCS32, BMASKBYTE1, tmpval);
+	rtl_set_bbreg(hw, RTXAGC_A_CCK1_MCS32, MASKBYTE1, tmpval);
 	RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
 		"CCK PWR 1M (rf-A) = 0x%x (reg 0x%x)\n",
 		tmpval, RTXAGC_A_CCK1_MCS32);
@@ -135,7 +135,7 @@ void rtl92d_phy_rf6052_set_cck_txpower(struct ieee80211_hw *hw,
 		"CCK PWR 2~11M (rf-A) = 0x%x (reg 0x%x)\n",
 		tmpval, RTXAGC_B_CCK11_A_CCK2_11);
 	tmpval = tx_agc[RF90_PATH_B] >> 24;
-	rtl_set_bbreg(hw, RTXAGC_B_CCK11_A_CCK2_11, BMASKBYTE0, tmpval);
+	rtl_set_bbreg(hw, RTXAGC_B_CCK11_A_CCK2_11, MASKBYTE0, tmpval);
 	RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
 		"CCK PWR 11M (rf-B) = 0x%x (reg 0x%x)\n",
 		tmpval, RTXAGC_B_CCK11_A_CCK2_11);
@@ -360,7 +360,7 @@ static void _rtl92d_write_ofdm_power_reg(struct ieee80211_hw *hw,
 			regoffset = regoffset_a[index];
 		else
 			regoffset = regoffset_b[index];
-		rtl_set_bbreg(hw, regoffset, BMASKDWORD, writeval);
+		rtl_set_bbreg(hw, regoffset, MASKDWORD, writeval);
 		RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
 			"Set 0x%x = %08x\n", regoffset, writeval);
 		if (((get_rf_type(rtlphy) == RF_2T2R) &&
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/phy.c b/drivers/net/wireless/rtlwifi/rtl8192se/phy.c
index 9c092e6eb3fe..77c5b5f35244 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192se/phy.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/phy.c
@@ -30,6 +30,7 @@
 #include "../wifi.h"
 #include "../pci.h"
 #include "../ps.h"
+#include "../core.h"
 #include "reg.h"
 #include "def.h"
 #include "phy.h"
@@ -833,18 +834,7 @@ static bool _rtl92s_phy_config_bb(struct ieee80211_hw *hw, u8 configtype)
 
 	if (configtype == BASEBAND_CONFIG_PHY_REG) {
 		for (i = 0; i < phy_reg_len; i = i + 2) {
-			if (phy_reg_table[i] == 0xfe)
-				mdelay(50);
-			else if (phy_reg_table[i] == 0xfd)
-				mdelay(5);
-			else if (phy_reg_table[i] == 0xfc)
-				mdelay(1);
-			else if (phy_reg_table[i] == 0xfb)
-				udelay(50);
-			else if (phy_reg_table[i] == 0xfa)
-				udelay(5);
-			else if (phy_reg_table[i] == 0xf9)
-				udelay(1);
+			rtl_addr_delay(phy_reg_table[i]);
 
 			/* Add delay for ECS T20 & LG malow platform, */
 			udelay(1);
@@ -886,18 +876,7 @@ static bool _rtl92s_phy_set_bb_to_diff_rf(struct ieee80211_hw *hw,
 
 	if (configtype == BASEBAND_CONFIG_PHY_REG) {
 		for (i = 0; i < phy_regarray2xtxr_len; i = i + 3) {
-			if (phy_regarray2xtxr_table[i] == 0xfe)
-				mdelay(50);
-			else if (phy_regarray2xtxr_table[i] == 0xfd)
-				mdelay(5);
-			else if (phy_regarray2xtxr_table[i] == 0xfc)
-				mdelay(1);
-			else if (phy_regarray2xtxr_table[i] == 0xfb)
-				udelay(50);
-			else if (phy_regarray2xtxr_table[i] == 0xfa)
-				udelay(5);
-			else if (phy_regarray2xtxr_table[i] == 0xf9)
-				udelay(1);
+			rtl_addr_delay(phy_regarray2xtxr_table[i]);
 
 			rtl92s_phy_set_bb_reg(hw, phy_regarray2xtxr_table[i],
 				phy_regarray2xtxr_table[i + 1],
@@ -920,18 +899,7 @@ static bool _rtl92s_phy_config_bb_with_pg(struct ieee80211_hw *hw,
 
 	if (configtype == BASEBAND_CONFIG_PHY_REG) {
 		for (i = 0; i < phy_pg_len; i = i + 3) {
-			if (phy_table_pg[i] == 0xfe)
-				mdelay(50);
-			else if (phy_table_pg[i] == 0xfd)
-				mdelay(5);
-			else if (phy_table_pg[i] == 0xfc)
-				mdelay(1);
-			else if (phy_table_pg[i] == 0xfb)
-				udelay(50);
-			else if (phy_table_pg[i] == 0xfa)
-				udelay(5);
-			else if (phy_table_pg[i] == 0xf9)
-				udelay(1);
+			rtl_addr_delay(phy_table_pg[i]);
 
 			_rtl92s_store_pwrindex_diffrate_offset(hw,
 					phy_table_pg[i],
@@ -1034,28 +1002,9 @@ u8 rtl92s_phy_config_rf(struct ieee80211_hw *hw, enum radio_path rfpath)
 	switch (rfpath) {
 	case RF90_PATH_A:
 		for (i = 0; i < radio_a_tblen; i = i + 2) {
-			if (radio_a_table[i] == 0xfe)
-				/* Delay specific ms. Only RF configuration
-				 * requires delay. */
-				mdelay(50);
-			else if (radio_a_table[i] == 0xfd)
-				mdelay(5);
-			else if (radio_a_table[i] == 0xfc)
-				mdelay(1);
-			else if (radio_a_table[i] == 0xfb)
-				udelay(50);
-			else if (radio_a_table[i] == 0xfa)
-				udelay(5);
-			else if (radio_a_table[i] == 0xf9)
-				udelay(1);
-			else
-				rtl92s_phy_set_rf_reg(hw, rfpath,
-						      radio_a_table[i],
-						      MASK20BITS,
-						      radio_a_table[i + 1]);
+			rtl_rfreg_delay(hw, rfpath, radio_a_table[i],
+					MASK20BITS, radio_a_table[i + 1]);
 
-			/* Add delay for ECS T20 & LG malow platform */
-			udelay(1);
 		}
 
 		/* PA Bias current for inferiority IC */
@@ -1063,28 +1012,8 @@ u8 rtl92s_phy_config_rf(struct ieee80211_hw *hw, enum radio_path rfpath)
 		break;
 	case RF90_PATH_B:
 		for (i = 0; i < radio_b_tblen; i = i + 2) {
-			if (radio_b_table[i] == 0xfe)
-				/* Delay specific ms. Only RF configuration
-				 * requires delay.*/
-				mdelay(50);
-			else if (radio_b_table[i] == 0xfd)
-				mdelay(5);
-			else if (radio_b_table[i] == 0xfc)
-				mdelay(1);
-			else if (radio_b_table[i] == 0xfb)
-				udelay(50);
-			else if (radio_b_table[i] == 0xfa)
-				udelay(5);
-			else if (radio_b_table[i] == 0xf9)
-				udelay(1);
-			else
-				rtl92s_phy_set_rf_reg(hw, rfpath,
-						      radio_b_table[i],
-						      MASK20BITS,
-						      radio_b_table[i + 1]);
-
-			/* Add delay for ECS T20 & LG malow platform */
-			udelay(1);
+			rtl_rfreg_delay(hw, rfpath, radio_b_table[i],
+					MASK20BITS, radio_b_table[i + 1]);
 		}
 		break;
 	case RF90_PATH_C:
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/reg.h b/drivers/net/wireless/rtlwifi/rtl8192se/reg.h
index c81c83591940..e13043479b71 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192se/reg.h
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/reg.h
@@ -1165,16 +1165,4 @@
 
 #define	BTX_AGCRATECCK				0x7f00
 
-#define	MASKBYTE0				0xff
-#define	MASKBYTE1				0xff00
-#define	MASKBYTE2				0xff0000
-#define	MASKBYTE3				0xff000000
-#define	MASKHWORD				0xffff0000
-#define	MASKLWORD				0x0000ffff
-#define	MASKDWORD				0xffffffff
-
-#define	MAKS12BITS				0xfffff
-#define	MASK20BITS				0xfffff
-#define RFREG_OFFSET_MASK			0xfffff
-
 #endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/Makefile b/drivers/net/wireless/rtlwifi/rtl8723ae/Makefile
index 4ed731f09b1f..9c34a85fdb89 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723ae/Makefile
+++ b/drivers/net/wireless/rtlwifi/rtl8723ae/Makefile
@@ -10,7 +10,6 @@ rtl8723ae-objs :=		\
 		led.o		\
 		phy.o		\
 		pwrseq.o	\
-		pwrseqcmd.o	\
 		rf.o		\
 		sw.o		\
 		table.o		\
diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c b/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c
index 8a8577a1783b..b47167c96b58 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c
@@ -43,7 +43,6 @@
 #include "../rtl8723com/fw_common.h"
 #include "led.h"
 #include "hw.h"
-#include "pwrseqcmd.h"
 #include "pwrseq.h"
 #include "btc.h"
 
diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/phy.c b/drivers/net/wireless/rtlwifi/rtl8723ae/phy.c
index 4f8189d3bb44..3ea78afdec73 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723ae/phy.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723ae/phy.c
@@ -30,6 +30,7 @@
 #include "../wifi.h"
 #include "../pci.h"
 #include "../ps.h"
+#include "../core.h"
 #include "reg.h"
 #include "def.h"
 #include "phy.h"
@@ -277,18 +278,7 @@ static bool _phy_cfg_bb_w_header(struct ieee80211_hw *hw, u8 configtype)
 	phy_regarray_table = RTL8723EPHY_REG_1TARRAY;
 	if (configtype == BASEBAND_CONFIG_PHY_REG) {
 		for (i = 0; i < phy_reg_arraylen; i = i + 2) {
-			if (phy_regarray_table[i] == 0xfe)
-				mdelay(50);
-			else if (phy_regarray_table[i] == 0xfd)
-				mdelay(5);
-			else if (phy_regarray_table[i] == 0xfc)
-				mdelay(1);
-			else if (phy_regarray_table[i] == 0xfb)
-				udelay(50);
-			else if (phy_regarray_table[i] == 0xfa)
-				udelay(5);
-			else if (phy_regarray_table[i] == 0xf9)
-				udelay(1);
+			rtl_addr_delay(phy_regarray_table[i]);
 			rtl_set_bbreg(hw, phy_regarray_table[i], MASKDWORD,
 				      phy_regarray_table[i + 1]);
 			udelay(1);
@@ -450,18 +440,7 @@ static bool _phy_cfg_bb_w_pgheader(struct ieee80211_hw *hw, u8 configtype)
 
 	if (configtype == BASEBAND_CONFIG_PHY_REG) {
 		for (i = 0; i < phy_regarray_pg_len; i = i + 3) {
-			if (phy_regarray_table_pg[i] == 0xfe)
-				mdelay(50);
-			else if (phy_regarray_table_pg[i] == 0xfd)
-				mdelay(5);
-			else if (phy_regarray_table_pg[i] == 0xfc)
-				mdelay(1);
-			else if (phy_regarray_table_pg[i] == 0xfb)
-				udelay(50);
-			else if (phy_regarray_table_pg[i] == 0xfa)
-				udelay(5);
-			else if (phy_regarray_table_pg[i] == 0xf9)
-				udelay(1);
+			rtl_addr_delay(phy_regarray_table_pg[i]);
 
 			_st_pwrIdx_dfrate_off(hw, phy_regarray_table_pg[i],
 					      phy_regarray_table_pg[i + 1],
@@ -488,24 +467,9 @@ bool rtl8723ae_phy_config_rf_with_headerfile(struct ieee80211_hw *hw,
 	switch (rfpath) {
 	case RF90_PATH_A:
 		for (i = 0; i < radioa_arraylen; i = i + 2) {
-			if (radioa_array_table[i] == 0xfe)
-				mdelay(50);
-			else if (radioa_array_table[i] == 0xfd)
-				mdelay(5);
-			else if (radioa_array_table[i] == 0xfc)
-				mdelay(1);
-			else if (radioa_array_table[i] == 0xfb)
-				udelay(50);
-			else if (radioa_array_table[i] == 0xfa)
-				udelay(5);
-			else if (radioa_array_table[i] == 0xf9)
-				udelay(1);
-			else {
-				rtl_set_rfreg(hw, rfpath, radioa_array_table[i],
-					      RFREG_OFFSET_MASK,
-					      radioa_array_table[i + 1]);
-				udelay(1);
-			}
+			rtl_rfreg_delay(hw, rfpath, radioa_array_table[i],
+					RFREG_OFFSET_MASK,
+					radioa_array_table[i + 1]);
 		}
 		break;
 	case RF90_PATH_B:
diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/pwrseq.h b/drivers/net/wireless/rtlwifi/rtl8723ae/pwrseq.h
index 7a46f9fdf558..a418acb4d0ca 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723ae/pwrseq.h
+++ b/drivers/net/wireless/rtlwifi/rtl8723ae/pwrseq.h
@@ -30,7 +30,6 @@
 #ifndef __RTL8723E_PWRSEQ_H__
 #define __RTL8723E_PWRSEQ_H__
 
-#include "pwrseqcmd.h"
 /*
 	Check document WM-20110607-Paul-RTL8723A_Power_Architecture-R02.vsd
 	There are 6 HW Power States:
diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/reg.h b/drivers/net/wireless/rtlwifi/rtl8723ae/reg.h
index 199da366c6da..64376b38708b 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723ae/reg.h
+++ b/drivers/net/wireless/rtlwifi/rtl8723ae/reg.h
@@ -2059,22 +2059,6 @@
 #define	BWORD1					0xc
 #define	BWORD					0xf
 
-#define	MASKBYTE0				0xff
-#define	MASKBYTE1				0xff00
-#define	MASKBYTE2				0xff0000
-#define	MASKBYTE3				0xff000000
-#define	MASKHWORD				0xffff0000
-#define	MASKLWORD				0x0000ffff
-#define	MASKDWORD				0xffffffff
-#define	MASK12BITS				0xfff
-#define	MASKH4BITS				0xf0000000
-#define MASKOFDM_D				0xffc00000
-#define	MASKCCK					0x3f3f3f3f
-
-#define	MASK4BITS				0x0f
-#define	MASK20BITS				0xfffff
-#define RFREG_OFFSET_MASK			0xfffff
-
 #define	BENABLE					0x1
 #define	BDISABLE				0x0
 
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/Makefile b/drivers/net/wireless/rtlwifi/rtl8723be/Makefile
index 4a75aab0539a..59e416abd93a 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723be/Makefile
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/Makefile
@@ -8,7 +8,6 @@ rtl8723be-objs :=		\
 		led.o		\
 		phy.o		\
 		pwrseq.o	\
-		pwrseqcmd.o	\
 		rf.o		\
 		sw.o		\
 		table.o		\
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/hw.c b/drivers/net/wireless/rtlwifi/rtl8723be/hw.c
index a500d266fae5..fc2af714e9ec 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723be/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/hw.c
@@ -39,7 +39,6 @@
 #include "../rtl8723com/fw_common.h"
 #include "led.h"
 #include "hw.h"
-#include "pwrseqcmd.h"
 #include "pwrseq.h"
 #include "../btcoexist/rtl_btc.h"
 
@@ -818,9 +817,9 @@ static bool _rtl8723be_init_mac(struct ieee80211_hw *hw)
 		mac_func_enable = false;
 
 	/* HW Power on sequence */
-	if (!rtlbe_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK,
-					PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,
-					RTL8723_NIC_ENABLE_FLOW)) {
+	if (!rtl_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK,
+				      PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,
+				      RTL8723_NIC_ENABLE_FLOW)) {
 		RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
 			 "init MAC Fail as power on failure\n");
 		return false;
@@ -1309,8 +1308,8 @@ static void _rtl8723be_poweroff_adapter(struct ieee80211_hw *hw)
 
 	/* Combo (PCIe + USB) Card and PCIe-MF Card */
 	/* 1. Run LPS WL RFOFF flow */
-	rtlbe_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
-				   PWR_INTF_PCI_MSK, RTL8723_NIC_LPS_ENTER_FLOW);
+	rtl_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
+				 PWR_INTF_PCI_MSK, RTL8723_NIC_LPS_ENTER_FLOW);
 
 	/* 2. 0x1F[7:0] = 0 */
 	/* turn off RF */
@@ -1328,8 +1327,8 @@ static void _rtl8723be_poweroff_adapter(struct ieee80211_hw *hw)
 	rtl_write_byte(rtlpriv, REG_MCUFWDL, 0x00);
 
 	/* HW card disable configuration. */
-	rtlbe_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
-				   PWR_INTF_PCI_MSK, RTL8723_NIC_DISABLE_FLOW);
+	rtl_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
+				 PWR_INTF_PCI_MSK, RTL8723_NIC_DISABLE_FLOW);
 
 	/* Reset MCU IO Wrapper */
 	u1b_tmp = rtl_read_byte(rtlpriv, REG_RSV_CTRL + 1);
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/phy.c b/drivers/net/wireless/rtlwifi/rtl8723be/phy.c
index ebc1e2788fca..cadae9bc4e3f 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723be/phy.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/phy.c
@@ -26,6 +26,7 @@
 #include "../wifi.h"
 #include "../pci.h"
 #include "../ps.h"
+#include "../core.h"
 #include "reg.h"
 #include "def.h"
 #include "phy.h"
@@ -41,9 +42,6 @@ static bool _rtl8723be_phy_config_bb_with_pgheaderfile(struct ieee80211_hw *hw,
 static bool rtl8723be_phy_sw_chn_step_by_step(struct ieee80211_hw *hw,
 					      u8 channel, u8 *stage,
 					      u8 *step, u32 *delay);
-static void _rtl8723be_config_bb_reg(struct ieee80211_hw *hw,
-				     u32 addr, u32 data);
-
 static bool _rtl8723be_check_condition(struct ieee80211_hw *hw,
 				       const u32  condition)
 {
@@ -114,7 +112,7 @@ static bool _rtl8723be_phy_config_bb_with_headerfile(struct ieee80211_hw *hw,
 			v1 = array_table[i];
 			v2 = array_table[i+1];
 			if (v1 < 0xcdcdcdcd) {
-				_rtl8723be_config_bb_reg(hw, v1, v2);
+				rtl_bb_delay(hw, v1, v2);
 			} else {/*This line is the start line of branch.*/
 				if (!_rtl8723be_check_condition(hw, array_table[i])) {
 					/*Discard the following (offset, data) pairs*/
@@ -135,7 +133,7 @@ static bool _rtl8723be_phy_config_bb_with_headerfile(struct ieee80211_hw *hw,
 					       v2 != 0xCDEF &&
 					       v2 != 0xCDCD &&
 					       i < arraylen - 2) {
-						_rtl8723be_config_bb_reg(hw,
+						rtl_bb_delay(hw,
 								    v1, v2);
 						READ_NEXT_PAIR(v1, v2, i);
 					}
@@ -389,27 +387,6 @@ static void _rtl8723be_phy_init_tx_power_by_rate(struct ieee80211_hw *hw)
 						[path][txnum][section] = 0;
 }
 
-static void _rtl8723be_config_bb_reg(struct ieee80211_hw *hw,
-				     u32 addr, u32 data)
-{
-	if (addr == 0xfe) {
-		mdelay(50);
-	} else if (addr == 0xfd) {
-		mdelay(5);
-	} else if (addr == 0xfc) {
-		mdelay(1);
-	} else if (addr == 0xfb) {
-		udelay(50);
-	} else if (addr == 0xfa) {
-		udelay(5);
-	} else if (addr == 0xf9) {
-		udelay(1);
-	} else {
-		rtl_set_bbreg(hw, addr, MASKDWORD, data);
-		udelay(1);
-	}
-}
-
 static void phy_set_txpwr_by_rate_base(struct ieee80211_hw *hw, u8 band,
 				       u8 path, u8 rate_section,
 				       u8 txnum, u8 value)
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/pwrseq.h b/drivers/net/wireless/rtlwifi/rtl8723be/pwrseq.h
index 960b408216df..a62f43ed8d32 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723be/pwrseq.h
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/pwrseq.h
@@ -26,7 +26,6 @@
 #ifndef __RTL8723BE_PWRSEQ_H__
 #define __RTL8723BE_PWRSEQ_H__
 
-#include "pwrseqcmd.h"
 /*	Check document WM-20130425-JackieLau-RTL8723B_Power_Architecture v05.vsd
  *	There are 6 HW Power States:
  *	0: POFF--Power Off
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/reg.h b/drivers/net/wireless/rtlwifi/rtl8723be/reg.h
index 65221e678230..4c653fab8795 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723be/reg.h
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/reg.h
@@ -2242,22 +2242,6 @@
 #define	BWORD1	0xc
 #define	BWORD	0xf
 
-#define	MASKBYTE0	0xff
-#define	MASKBYTE1	0xff00
-#define	MASKBYTE2	0xff0000
-#define	MASKBYTE3	0xff000000
-#define	MASKHWORD	0xffff0000
-#define	MASKLWORD	0x0000ffff
-#define	MASKDWORD			0xffffffff
-#define	MASK12BITS			0xfff
-#define	MASKH4BITS			0xf0000000
-#define MASKOFDM_D			0xffc00000
-#define	MASKCCK				0x3f3f3f3f
-
-#define	MASK4BITS		0x0f
-#define	MASK20BITS		0xfffff
-#define RFREG_OFFSET_MASK		0xfffff
-
 #define	BENABLE	0x1
 #define	BDISABLE	0x0
 
diff --git a/drivers/net/wireless/rtlwifi/wifi.h b/drivers/net/wireless/rtlwifi/wifi.h
index 5cb799e6bd08..0b4d641bf715 100644
--- a/drivers/net/wireless/rtlwifi/wifi.h
+++ b/drivers/net/wireless/rtlwifi/wifi.h
@@ -57,6 +57,22 @@
 #define	MASK20BITS				0xfffff
 #define RFREG_OFFSET_MASK			0xfffff
 
+#define	MASKBYTE0				0xff
+#define	MASKBYTE1				0xff00
+#define	MASKBYTE2				0xff0000
+#define	MASKBYTE3				0xff000000
+#define	MASKHWORD				0xffff0000
+#define	MASKLWORD				0x0000ffff
+#define	MASKDWORD				0xffffffff
+#define	MASK12BITS				0xfff
+#define	MASKH4BITS				0xf0000000
+#define MASKOFDM_D				0xffc00000
+#define	MASKCCK					0x3f3f3f3f
+
+#define	MASK4BITS				0x0f
+#define	MASK20BITS				0xfffff
+#define RFREG_OFFSET_MASK			0xfffff
+
 #define RF_CHANGE_BY_INIT			0
 #define RF_CHANGE_BY_IPS			BIT(28)
 #define RF_CHANGE_BY_PS				BIT(29)
-- 
cgit v1.2.2


From 1bae2ae3647393b8ce185135ef0854486ce5a4c2 Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Tue, 4 Mar 2014 16:53:49 -0600
Subject: rtlwifi: rtl8723be: rtl8723com: Remove unused allow_all_destaddr
 functions

In a previous commit, Peter Wu removed this call as configure_filter takes care
of setting/clearing RCR_AAP. This patch makes the same change for rtl8723be.

In addition, a change is made in the logging level for one debug printout.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtlwifi/rtl8723be/sw.c         | 1 -
 drivers/net/wireless/rtlwifi/rtl8723com/fw_common.c | 2 +-
 2 files changed, 1 insertion(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/sw.c b/drivers/net/wireless/rtlwifi/rtl8723be/sw.c
index 7834ae577b52..cc4ab3f9ffc8 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723be/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/sw.c
@@ -239,7 +239,6 @@ static struct rtl_hal_ops rtl8723be_hal_ops = {
 	.enable_hw_sec = rtl8723be_enable_hw_security_config,
 	.set_key = rtl8723be_set_key,
 	.init_sw_leds = rtl8723be_init_sw_leds,
-	.allow_all_destaddr = rtl8723be_allow_all_destaddr,
 	.get_bbreg = rtl8723_phy_query_bb_reg,
 	.set_bbreg = rtl8723_phy_set_bb_reg,
 	.get_rfreg = rtl8723be_phy_query_rf_reg,
diff --git a/drivers/net/wireless/rtlwifi/rtl8723com/fw_common.c b/drivers/net/wireless/rtlwifi/rtl8723com/fw_common.c
index 32c390ffc7d2..c12da552b7f7 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723com/fw_common.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723com/fw_common.c
@@ -263,7 +263,7 @@ int rtl8723_download_fw(struct ieee80211_hw *hw,
 		 "normal Firmware SIZE %d\n", fwsize);
 
 	if (rtlpriv->cfg->ops->is_fw_header(pfwheader)) {
-		RT_TRACE(rtlpriv, COMP_FW, DBG_EMERG,
+		RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD,
 			 "Firmware Version(%d), Signature(%#x), Size(%d)\n",
 			 pfwheader->version, pfwheader->signature,
 			 (int)sizeof(struct rtl92c_firmware_header));
-- 
cgit v1.2.2


From a53268be0cb9763f11da4f6fe3fb924cbe3a7d4a Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Tue, 4 Mar 2014 16:53:50 -0600
Subject: rtlwifi: rtl8192cu: Fix too long disable of IRQs

In commit f78bccd79ba3cd9d9664981b501d57bdb81ab8a4 entitled "rtlwifi:
rtl8192ce: Fix too long disable of IRQs", Olivier Langlois
<olivier@trillion01.com> fixed a problem caused by an extra long disabling
of interrupts. This patch makes the same fix for rtl8192cu.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtlwifi/rtl8192cu/hw.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
index db7df7f83a02..68b5c7e92cfb 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
@@ -985,6 +985,17 @@ int rtl92cu_hw_init(struct ieee80211_hw *hw)
 	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
 	int err = 0;
 	static bool iqk_initialized;
+	unsigned long flags;
+
+	/* As this function can take a very long time (up to 350 ms)
+	 * and can be called with irqs disabled, reenable the irqs
+	 * to let the other devices continue being serviced.
+	 *
+	 * It is safe doing so since our own interrupts will only be enabled
+	 * in a subsequent step.
+	 */
+	local_save_flags(flags);
+	local_irq_enable();
 
 	rtlhal->hw_type = HARDWARE_TYPE_RTL8192CU;
 	err = _rtl92cu_init_mac(hw);
@@ -997,7 +1008,7 @@ int rtl92cu_hw_init(struct ieee80211_hw *hw)
 		RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
 			 "Failed to download FW. Init HW without FW now..\n");
 		err = 1;
-		return err;
+		goto exit;
 	}
 	rtlhal->last_hmeboxnum = 0; /* h2c */
 	_rtl92cu_phy_param_tab_init(hw);
@@ -1034,6 +1045,8 @@ int rtl92cu_hw_init(struct ieee80211_hw *hw)
 	_InitPABias(hw);
 	_update_mac_setting(hw);
 	rtl92c_dm_init(hw);
+exit:
+	local_irq_restore(flags);
 	return err;
 }
 
-- 
cgit v1.2.2


From 2610decdd0b3808ba20471a999835cfee5275f98 Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Tue, 4 Mar 2014 16:53:51 -0600
Subject: rtlwifi: rtl8192se: Fix too long disable of IRQs

In commit f78bccd79ba3cd9d9664981b501d57bdb81ab8a4 entitled "rtlwifi:
rtl8192ce: Fix too long disable of IRQs", Olivier Langlois
<olivier@trillion01.com> fixed a problem caused by an extra long disabling
of interrupts. This patch makes the same fix for rtl8192se.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtlwifi/rtl8192se/hw.c | 27 +++++++++++++++++++++------
 1 file changed, 21 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/hw.c b/drivers/net/wireless/rtlwifi/rtl8192se/hw.c
index 7c4b39cc5dbf..3015af167b2b 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192se/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/hw.c
@@ -955,7 +955,7 @@ int rtl92se_hw_init(struct ieee80211_hw *hw)
 	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
 	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
 	u8 tmp_byte = 0;
-
+	unsigned long flags;
 	bool rtstatus = true;
 	u8 tmp_u1b;
 	int err = false;
@@ -967,6 +967,16 @@ int rtl92se_hw_init(struct ieee80211_hw *hw)
 
 	rtlpci->being_init_adapter = true;
 
+	/* As this function can take a very long time (up to 350 ms)
+	 * and can be called with irqs disabled, reenable the irqs
+	 * to let the other devices continue being serviced.
+	 *
+	 * It is safe doing so since our own interrupts will only be enabled
+	 * in a subsequent step.
+	 */
+	local_save_flags(flags);
+	local_irq_enable();
+
 	rtlpriv->intf_ops->disable_aspm(hw);
 
 	/* 1. MAC Initialize */
@@ -984,7 +994,8 @@ int rtl92se_hw_init(struct ieee80211_hw *hw)
 		RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
 			 "Failed to download FW. Init HW without FW now... "
 			 "Please copy FW into /lib/firmware/rtlwifi\n");
-		return 1;
+		err = 1;
+		goto exit;
 	}
 
 	/* After FW download, we have to reset MAC register */
@@ -997,7 +1008,8 @@ int rtl92se_hw_init(struct ieee80211_hw *hw)
 	/* 3. Initialize MAC/PHY Config by MACPHY_reg.txt */
 	if (!rtl92s_phy_mac_config(hw)) {
 		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "MAC Config failed\n");
-		return rtstatus;
+		err = rtstatus;
+		goto exit;
 	}
 
 	/* because last function modify RCR, so we update
@@ -1016,7 +1028,8 @@ int rtl92se_hw_init(struct ieee80211_hw *hw)
 	/* 4. Initialize BB After MAC Config PHY_reg.txt, AGC_Tab.txt */
 	if (!rtl92s_phy_bb_config(hw)) {
 		RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, "BB Config failed\n");
-		return rtstatus;
+		err = rtstatus;
+		goto exit;
 	}
 
 	/* 5. Initiailze RF RAIO_A.txt RF RAIO_B.txt */
@@ -1033,7 +1046,8 @@ int rtl92se_hw_init(struct ieee80211_hw *hw)
 
 	if (!rtl92s_phy_rf_config(hw)) {
 		RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "RF Config failed\n");
-		return rtstatus;
+		err = rtstatus;
+		goto exit;
 	}
 
 	/* After read predefined TXT, we must set BB/MAC/RF
@@ -1122,8 +1136,9 @@ int rtl92se_hw_init(struct ieee80211_hw *hw)
 
 	rtlpriv->cfg->ops->led_control(hw, LED_CTL_POWER_ON);
 	rtl92s_dm_init(hw);
+exit:
+	local_irq_restore(flags);
 	rtlpci->being_init_adapter = false;
-
 	return err;
 }
 
-- 
cgit v1.2.2


From 6b6392715856d563719991e9ce95e773491a8983 Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Tue, 4 Mar 2014 16:53:52 -0600
Subject: rtlwifi: rtl8188ee: Fix too long disable of IRQs

In commit f78bccd79ba3cd9d9664981b501d57bdb81ab8a4 entitled "rtlwifi:
rtl8192ce: Fix too long disable of IRQs", Olivier Langlois
<olivier@trillion01.com> fixed a problem caused by an extra long disabling
of interrupts. This patch makes the same fix for rtl8188ee.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtlwifi/rtl8188ee/hw.c | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/hw.c b/drivers/net/wireless/rtlwifi/rtl8188ee/hw.c
index 6561805c3a88..bd2a26bafb69 100644
--- a/drivers/net/wireless/rtlwifi/rtl8188ee/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8188ee/hw.c
@@ -1024,9 +1024,20 @@ int rtl88ee_hw_init(struct ieee80211_hw *hw)
 	bool rtstatus = true;
 	int err = 0;
 	u8 tmp_u1b, u1byte;
+	unsigned long flags;
 
 	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "Rtl8188EE hw init\n");
 	rtlpriv->rtlhal.being_init_adapter = true;
+	/* As this function can take a very long time (up to 350 ms)
+	 * and can be called with irqs disabled, reenable the irqs
+	 * to let the other devices continue being serviced.
+	 *
+	 * It is safe doing so since our own interrupts will only be enabled
+	 * in a subsequent step.
+	 */
+	local_save_flags(flags);
+	local_irq_enable();
+
 	rtlpriv->intf_ops->disable_aspm(hw);
 
 	tmp_u1b = rtl_read_byte(rtlpriv, REG_SYS_CLKR+1);
@@ -1042,7 +1053,7 @@ int rtl88ee_hw_init(struct ieee80211_hw *hw)
 	if (rtstatus != true) {
 		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Init MAC failed\n");
 		err = 1;
-		return err;
+		goto exit;
 	}
 
 	err = rtl88e_download_fw(hw, false);
@@ -1050,8 +1061,7 @@ int rtl88ee_hw_init(struct ieee80211_hw *hw)
 		RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
 			 "Failed to download FW. Init HW without FW now..\n");
 		err = 1;
-		rtlhal->fw_ready = false;
-		return err;
+		goto exit;
 	} else {
 		rtlhal->fw_ready = true;
 	}
@@ -1134,10 +1144,12 @@ int rtl88ee_hw_init(struct ieee80211_hw *hw)
 	}
 	rtl_write_byte(rtlpriv, REG_NAV_CTRL+2,  ((30000+127)/128));
 	rtl88e_dm_init(hw);
+exit:
+	local_irq_restore(flags);
 	rtlpriv->rtlhal.being_init_adapter = false;
 	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "end of Rtl8188EE hw init %x\n",
 		 err);
-	return 0;
+	return err;
 }
 
 static enum version_8188e _rtl88ee_read_chip_version(struct ieee80211_hw *hw)
-- 
cgit v1.2.2


From bfc1010c418a22cbebd8b1bd1e75dad6a527a609 Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Tue, 4 Mar 2014 16:53:53 -0600
Subject: rtlwifi: rtl8723ae: Fix too long disable of IRQs

In commit f78bccd79ba3cd9d9664981b501d57bdb81ab8a4 entitled "rtlwifi:
rtl8192ce: Fix too long disable of IRQs", Olivier Langlois
<olivier@trillion01.com> fixed a problem caused by an extra long disabling
of interrupts. This patch makes the same fix for rtl8723ae.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtlwifi/rtl8723ae/hw.c | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c b/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c
index b47167c96b58..f4c9852d1e1e 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c
@@ -881,14 +881,25 @@ int rtl8723ae_hw_init(struct ieee80211_hw *hw)
 	bool rtstatus = true;
 	int err;
 	u8 tmp_u1b;
+	unsigned long flags;
 
 	rtlpriv->rtlhal.being_init_adapter = true;
+	/* As this function can take a very long time (up to 350 ms)
+	 * and can be called with irqs disabled, reenable the irqs
+	 * to let the other devices continue being serviced.
+	 *
+	 * It is safe doing so since our own interrupts will only be enabled
+	 * in a subsequent step.
+	 */
+	local_save_flags(flags);
+	local_irq_enable();
+
 	rtlpriv->intf_ops->disable_aspm(hw);
 	rtstatus = _rtl8712e_init_mac(hw);
 	if (rtstatus != true) {
 		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Init MAC failed\n");
 		err = 1;
-		return err;
+		goto exit;
 	}
 
 	err = rtl8723_download_fw(hw, false);
@@ -896,8 +907,7 @@ int rtl8723ae_hw_init(struct ieee80211_hw *hw)
 		RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
 			 "Failed to download FW. Init HW without FW now..\n");
 		err = 1;
-		rtlhal->fw_ready = false;
-		return err;
+		goto exit;
 	} else {
 		rtlhal->fw_ready = true;
 	}
@@ -972,6 +982,8 @@ int rtl8723ae_hw_init(struct ieee80211_hw *hw)
 		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, "under 1.5V\n");
 	}
 	rtl8723ae_dm_init(hw);
+exit:
+	local_irq_restore(flags);
 	rtlpriv->rtlhal.being_init_adapter = false;
 	return err;
 }
-- 
cgit v1.2.2


From 2d9d532ff754c352e4b55527569d0552fc33c0db Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Wed, 5 Mar 2014 17:25:59 -0600
Subject: rtlwifi: rtl8192ce: Handle unused switch case

This patch prevents log spamming by adding a case for a previously
unhandled case.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtlwifi/rtl8192ce/hw.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c
index c6a38201ac81..4ae51d5b436f 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c
@@ -542,9 +542,11 @@ void rtl92ce_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 						(u8 *)(&fw_current_inps));
 			}
 		break; }
+	case HW_VAR_KEEP_ALIVE:
+		break;
 	default:
 		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 "switch case not processed\n");
+			 "switch case %d not processed\n", variable);
 		break;
 	}
 }
-- 
cgit v1.2.2


From 2903d04b5abe10393f659c5a0a4f8adec1b67b65 Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Wed, 5 Mar 2014 17:26:00 -0600
Subject: rtlwifi: rtl8723be: Fix sparse errors

Sparse reports the following:

drivers/net/wireless/rtlwifi/rtl8723be/sw.c:374:14: sparse: duplicate const

drivers/net/wireless/rtlwifi/rtl8723be/hw.c:2214:30: sparse: cast to restricted __le32

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtlwifi/rtl8723be/hw.c | 3 +--
 drivers/net/wireless/rtlwifi/rtl8723be/sw.c | 2 +-
 2 files changed, 2 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/hw.c b/drivers/net/wireless/rtlwifi/rtl8723be/hw.c
index fc2af714e9ec..7e70c7108d91 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723be/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/hw.c
@@ -2210,8 +2210,7 @@ static void rtl8723be_update_hal_rate_mask(struct ieee80211_hw *hw,
 
 	RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG,
 		 "ratr_bitmap :%x\n", ratr_bitmap);
-	*(u32 *)&rate_mask = EF4BYTE((ratr_bitmap & 0x0fffffff) |
-				     (ratr_index << 28));
+	*(u32 *)&rate_mask = (ratr_bitmap & 0x0fffffff) | (ratr_index << 28);
 	rate_mask[0] = macid;
 	rate_mask[1] = _rtl8723be_mrate_idx_to_arfr_id(hw, ratr_index) |
 						       (shortgi ? 0x80 : 0x00);
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/sw.c b/drivers/net/wireless/rtlwifi/rtl8723be/sw.c
index cc4ab3f9ffc8..b4577ebc4bb0 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723be/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/sw.c
@@ -370,7 +370,7 @@ MODULE_PARM_DESC(ips, "using no link power save (default 1 is open)\n");
 MODULE_PARM_DESC(fwlps, "using linked fw control power save (default 1 is open)\n");
 MODULE_PARM_DESC(debug, "Set debug level (0-5) (default 0)");
 
-static const SIMPLE_DEV_PM_OPS(rtlwifi_pm_ops, rtl_pci_suspend, rtl_pci_resume);
+static SIMPLE_DEV_PM_OPS(rtlwifi_pm_ops, rtl_pci_suspend, rtl_pci_resume);
 
 static struct pci_driver rtl8723be_driver = {
 	.name = KBUILD_MODNAME,
-- 
cgit v1.2.2


From 7ce24ab74c04ce0ce238b5dce30e9bc3823527be Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Wed, 5 Mar 2014 17:26:01 -0600
Subject: rtlwifi: rtl8723be: Fix smatch warnings

Smatch reports the following:

drivers/net/wireless/rtlwifi/rtl8723be/fw.c:208 _rtl8723be_fill_h2c_command() warn: variable dereferenced before check 'rtlhal' (see line 69)
drivers/net/wireless/rtlwifi/rtl8723be/hw.c:1732 _rtl8723be_read_adapter_info() error: __builtin_memcpy() '&rtlefuse->efuse_map[0][0]' too small (256 vs 512)

The first one is fixed by removing two pointless tests for NULL pointers.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtlwifi/rtl8723be/fw.c | 8 --------
 drivers/net/wireless/rtlwifi/wifi.h         | 2 +-
 2 files changed, 1 insertion(+), 9 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/fw.c b/drivers/net/wireless/rtlwifi/rtl8723be/fw.c
index 0f3522db5b37..f856be6fc138 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723be/fw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/fw.c
@@ -201,14 +201,6 @@ static void _rtl8723be_fill_h2c_command(struct ieee80211_hw *hw, u8 element_id,
 			 "pHalData->last_hmeboxnum  = %d\n",
 			 rtlhal->last_hmeboxnum);
 	}
-	if (!rtlpriv) {
-		pr_err("rtlpriv bad\n");
-		return;
-	}
-	if (!rtlhal) {
-		pr_err("rtlhal bad\n");
-		return;
-	}
 	spin_lock_irqsave(&rtlpriv->locks.h2c_lock, flag);
 	rtlhal->h2c_setinprogress = false;
 	spin_unlock_irqrestore(&rtlpriv->locks.h2c_lock, flag);
diff --git a/drivers/net/wireless/rtlwifi/wifi.h b/drivers/net/wireless/rtlwifi/wifi.h
index 0b4d641bf715..6965afdf572a 100644
--- a/drivers/net/wireless/rtlwifi/wifi.h
+++ b/drivers/net/wireless/rtlwifi/wifi.h
@@ -1587,7 +1587,7 @@ struct rtl_dm {
 	u64 last_rx_ok_cnt;
 };
 
-#define	EFUSE_MAX_LOGICAL_SIZE			256
+#define	EFUSE_MAX_LOGICAL_SIZE			512
 
 struct rtl_efuse {
 	bool autoLoad_ok;
-- 
cgit v1.2.2


From 561e722201e41e304936b8a2aaa282c46ad4f393 Mon Sep 17 00:00:00 2001
From: Arend van Spriel <arend@broadcom.com>
Date: Thu, 6 Mar 2014 10:16:11 +0100
Subject: Revert "brcmfmac: Use atomic functions for intstatus update."

This reverts commit c98db0bec72ac7ef127119c1ed962d6f56802b12.

The function atomic_set_mask() is not architecture independent
so it can not be used in the driver as is.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 20 ++++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index 5c2706e50775..70bab5e089eb 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -2444,7 +2444,7 @@ static int brcmf_sdio_intr_rstatus(struct brcmf_sdio *bus)
 	struct brcmf_core *buscore;
 	u32 addr;
 	unsigned long val;
-	int ret;
+	int n, ret;
 
 	buscore = brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV);
 	addr = buscore->base + offsetof(struct sdpcmd_regs, intstatus);
@@ -2452,7 +2452,7 @@ static int brcmf_sdio_intr_rstatus(struct brcmf_sdio *bus)
 	val = brcmf_sdiod_regrl(bus->sdiodev, addr, &ret);
 	bus->sdcnt.f1regdata++;
 	if (ret != 0)
-		return ret;
+		val = 0;
 
 	val &= bus->hostintmask;
 	atomic_set(&bus->fcstate, !!(val & I_HMB_FC_STATE));
@@ -2461,7 +2461,13 @@ static int brcmf_sdio_intr_rstatus(struct brcmf_sdio *bus)
 	if (val) {
 		brcmf_sdiod_regwl(bus->sdiodev, addr, val, &ret);
 		bus->sdcnt.f1regdata++;
-		atomic_set_mask(val, &bus->intstatus);
+	}
+
+	if (ret) {
+		atomic_set(&bus->intstatus, 0);
+	} else if (val) {
+		for_each_set_bit(n, &val, 32)
+			set_bit(n, (unsigned long *)&bus->intstatus.counter);
 	}
 
 	return ret;
@@ -2473,7 +2479,7 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus)
 	unsigned long intstatus;
 	uint txlimit = bus->txbound;	/* Tx frames to send before resched */
 	uint framecnt;			/* Temporary counter of tx/rx frames */
-	int err = 0;
+	int err = 0, n;
 
 	brcmf_dbg(TRACE, "Enter\n");
 
@@ -2577,8 +2583,10 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus)
 	}
 
 	/* Keep still-pending events for next scheduling */
-	if (intstatus)
-		atomic_set_mask(intstatus, &bus->intstatus);
+	if (intstatus) {
+		for_each_set_bit(n, &intstatus, 32)
+			set_bit(n, (unsigned long *)&bus->intstatus.counter);
+	}
 
 	brcmf_sdio_clrintr(bus);
 
-- 
cgit v1.2.2


From 5cbb9c285bdcc14ee381120dab7e23a81060f1c0 Mon Sep 17 00:00:00 2001
From: Hante Meuleman <meuleman@broadcom.com>
Date: Thu, 6 Mar 2014 10:16:12 +0100
Subject: brcmfmac: Use atomic functions for intstatus update.

The intstatus in sdio code can be updated from different
threads. To protect intstatus access, atomic functions are
used. One of them is set_bit, but this function is not
guaranteed atomic on all platforms. The loop was replaced
with local created OR function.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 29 +++++++++++-----------
 1 file changed, 15 insertions(+), 14 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index 70bab5e089eb..a111b6fbbeba 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -2439,12 +2439,21 @@ static inline void brcmf_sdio_clrintr(struct brcmf_sdio *bus)
 	}
 }
 
+static void atomic_orr(int val, atomic_t *v)
+{
+	int old_val;
+
+	old_val = atomic_read(v);
+	while (atomic_cmpxchg(v, old_val, val | old_val) != old_val)
+		old_val = atomic_read(v);
+}
+
 static int brcmf_sdio_intr_rstatus(struct brcmf_sdio *bus)
 {
 	struct brcmf_core *buscore;
 	u32 addr;
 	unsigned long val;
-	int n, ret;
+	int ret;
 
 	buscore = brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV);
 	addr = buscore->base + offsetof(struct sdpcmd_regs, intstatus);
@@ -2452,7 +2461,7 @@ static int brcmf_sdio_intr_rstatus(struct brcmf_sdio *bus)
 	val = brcmf_sdiod_regrl(bus->sdiodev, addr, &ret);
 	bus->sdcnt.f1regdata++;
 	if (ret != 0)
-		val = 0;
+		return ret;
 
 	val &= bus->hostintmask;
 	atomic_set(&bus->fcstate, !!(val & I_HMB_FC_STATE));
@@ -2461,13 +2470,7 @@ static int brcmf_sdio_intr_rstatus(struct brcmf_sdio *bus)
 	if (val) {
 		brcmf_sdiod_regwl(bus->sdiodev, addr, val, &ret);
 		bus->sdcnt.f1regdata++;
-	}
-
-	if (ret) {
-		atomic_set(&bus->intstatus, 0);
-	} else if (val) {
-		for_each_set_bit(n, &val, 32)
-			set_bit(n, (unsigned long *)&bus->intstatus.counter);
+		atomic_orr(val, &bus->intstatus);
 	}
 
 	return ret;
@@ -2479,7 +2482,7 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus)
 	unsigned long intstatus;
 	uint txlimit = bus->txbound;	/* Tx frames to send before resched */
 	uint framecnt;			/* Temporary counter of tx/rx frames */
-	int err = 0, n;
+	int err = 0;
 
 	brcmf_dbg(TRACE, "Enter\n");
 
@@ -2583,10 +2586,8 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus)
 	}
 
 	/* Keep still-pending events for next scheduling */
-	if (intstatus) {
-		for_each_set_bit(n, &intstatus, 32)
-			set_bit(n, (unsigned long *)&bus->intstatus.counter);
-	}
+	if (intstatus)
+		atomic_orr(intstatus, &bus->intstatus);
 
 	brcmf_sdio_clrintr(bus);
 
-- 
cgit v1.2.2


From aa0bee1f409f76222ed009980425dbf12bc7133b Mon Sep 17 00:00:00 2001
From: Yogesh Ashok Powar <yogeshp@marvell.com>
Date: Thu, 6 Mar 2014 20:42:43 +0530
Subject: mwl8k: le32_to_cpu cast to restricted

It fixes couple of sparse check
>#make C=1 CF=-D__CHECK_ENDIAN__ drivers/net/wireless/mwl8k.o
>drivers/net/wireless/mwl8k.c:3104:19: warning: cast to restricted __le32
>drivers/net/wireless/mwl8k.c:3108:18: warning: cast to restricted __le32

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Nishant Sarmukadam <nishants@marvell.com>
Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index b6d83f6888fa..706a445dba37 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -3103,11 +3103,11 @@ void mwl8k_update_survey(struct mwl8k_priv *priv,
 
 	survey = &priv->survey[idx];
 
-	cca_cnt = le32_to_cpu(ioread32(priv->regs + NOK_CCA_CNT_REG));
+	cca_cnt = ioread32(priv->regs + NOK_CCA_CNT_REG);
 	cca_cnt /= 1000; /* uSecs to mSecs */
 	survey->channel_time_busy = (u64) cca_cnt;
 
-	rx_rdy = le32_to_cpu(ioread32(priv->regs + BBU_RXRDY_CNT_REG));
+	rx_rdy = ioread32(priv->regs + BBU_RXRDY_CNT_REG);
 	rx_rdy /= 1000; /* uSecs to mSecs */
 	survey->channel_time_rx = (u64) rx_rdy;
 
-- 
cgit v1.2.2


From c7c361efc49681962c5361e55a56d7ad8f5654a7 Mon Sep 17 00:00:00 2001
From: Yogesh Ashok Powar <yogeshp@marvell.com>
Date: Thu, 6 Mar 2014 20:42:58 +0530
Subject: mwl8k: mwl8k_update_survey can be static

It fixes following sparse check warning
>#make C=1 CF=-D__CHECK_ENDIAN__ drivers/net/wireless/mwl8k.o
>drivers/net/wireless/mwl8k.c:3089:6: warning: symbol 'mwl8k_update_survey' was not declared. Should it be static?

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Nishant Sarmukadam <nishants@marvell.com>
Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 706a445dba37..3c0a0a86ba12 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -3088,8 +3088,8 @@ exit:
 	return idx;
 }
 
-void mwl8k_update_survey(struct mwl8k_priv *priv,
-			 struct ieee80211_channel *channel)
+static void mwl8k_update_survey(struct mwl8k_priv *priv,
+				struct ieee80211_channel *channel)
 {
 	u32 cca_cnt, rx_rdy;
 	s8 nf = 0, idx;
-- 
cgit v1.2.2


From 072256d1f2b8ba0bbb265d590c703f3d57a39d6a Mon Sep 17 00:00:00 2001
From: Veaceslav Falico <vfalico@redhat.com>
Date: Thu, 6 Mar 2014 15:33:22 +0100
Subject: bonding: make slave status notifications GFP_ATOMIC

Currently we're using GFP_KERNEL, however there are some path(s) where we
can hold some spinlocks, specifically bond->curr_slave_lock:

[    4.722916] BUG: sleeping function called from invalid context at mm/slub.c:965
[    4.724438] in_atomic(): 1, irqs_disabled(): 0, pid: 940, name: ifup-eth
[    4.726034] 5 locks held by ifup-eth/940:
...snip...
[    4.734646]  #4:  (&bond->curr_slave_lock){+...+.}, at: [<ffffffffa00badc6>] bond_enslave+0xda6/0xdd0 [bonding]
...snip...
[    4.759081]  [<ffffffffa00b6f11>] bond_change_active_slave+0x191/0x3b0 [bonding]
[    4.760917]  [<ffffffffa00b7227>] bond_select_active_slave+0xf7/0x1d0 [bonding]
[    4.762751]  [<ffffffffa00badce>] bond_enslave+0xdae/0xdd0 [bonding]
...snip...

As it's out of hot path and is a really rare event - change the gfp_t flags
to GFP_ATOMIC to avoid sleeping under spinlock.

v2: convert new notify calls to GFP_ATOMIC.

CC: Thomas Glanzmann <thomas@glanzmann.de>
CC: Ding Tianhong <dingtianhong@huawei.com>
CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bonding.h | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h
index b7127a1ba2c9..63ee116adfab 100644
--- a/drivers/net/bonding/bonding.h
+++ b/drivers/net/bonding/bonding.h
@@ -293,7 +293,7 @@ static inline void bond_set_active_slave(struct slave *slave)
 {
 	if (slave->backup) {
 		slave->backup = 0;
-		rtmsg_ifinfo(RTM_NEWLINK, slave->dev, 0, GFP_KERNEL);
+		rtmsg_ifinfo(RTM_NEWLINK, slave->dev, 0, GFP_ATOMIC);
 	}
 }
 
@@ -301,7 +301,7 @@ static inline void bond_set_backup_slave(struct slave *slave)
 {
 	if (!slave->backup) {
 		slave->backup = 1;
-		rtmsg_ifinfo(RTM_NEWLINK, slave->dev, 0, GFP_KERNEL);
+		rtmsg_ifinfo(RTM_NEWLINK, slave->dev, 0, GFP_ATOMIC);
 	}
 }
 
@@ -313,7 +313,7 @@ static inline void bond_set_slave_state(struct slave *slave,
 
 	slave->backup = slave_state;
 	if (notify) {
-		rtmsg_ifinfo(RTM_NEWLINK, slave->dev, 0, GFP_KERNEL);
+		rtmsg_ifinfo(RTM_NEWLINK, slave->dev, 0, GFP_ATOMIC);
 		slave->should_notify = 0;
 	} else {
 		if (slave->should_notify)
@@ -343,7 +343,7 @@ static inline void bond_slave_state_notify(struct bonding *bond)
 
 	bond_for_each_slave(bond, tmp, iter) {
 		if (tmp->should_notify) {
-			rtmsg_ifinfo(RTM_NEWLINK, tmp->dev, 0, GFP_KERNEL);
+			rtmsg_ifinfo(RTM_NEWLINK, tmp->dev, 0, GFP_ATOMIC);
 			tmp->should_notify = 0;
 		}
 	}
-- 
cgit v1.2.2


From fca28094cd628e187520f412caa0fb687bfbc8d4 Mon Sep 17 00:00:00 2001
From: stephen hemminger <stephen@networkplumber.org>
Date: Tue, 4 Mar 2014 16:34:25 -0800
Subject: bonding: remove dead code

These functions are defined but no longer used.
Compile tested only.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ding Tianhong <dingtianhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_main.c | 46 -----------------------------------------
 drivers/net/bonding/bonding.h   |  2 --
 2 files changed, 48 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 730d72c706c9..e299c54ec185 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -3947,52 +3947,6 @@ static void bond_uninit(struct net_device *bond_dev)
 
 /*------------------------- Module initialization ---------------------------*/
 
-int bond_parm_tbl_lookup(int mode, const struct bond_parm_tbl *tbl)
-{
-	int i;
-
-	for (i = 0; tbl[i].modename; i++)
-		if (mode == tbl[i].mode)
-			return tbl[i].mode;
-
-	return -1;
-}
-
-static int bond_parm_tbl_lookup_name(const char *modename,
-				     const struct bond_parm_tbl *tbl)
-{
-	int i;
-
-	for (i = 0; tbl[i].modename; i++)
-		if (strcmp(modename, tbl[i].modename) == 0)
-			return tbl[i].mode;
-
-	return -1;
-}
-
-/*
- * Convert string input module parms.  Accept either the
- * number of the mode or its string name.  A bit complicated because
- * some mode names are substrings of other names, and calls from sysfs
- * may have whitespace in the name (trailing newlines, for example).
- */
-int bond_parse_parm(const char *buf, const struct bond_parm_tbl *tbl)
-{
-	int modeint;
-	char *p, modestr[BOND_MAX_MODENAME_LEN + 1];
-
-	for (p = (char *)buf; *p; p++)
-		if (!(isdigit(*p) || isspace(*p)))
-			break;
-
-	if (*p && sscanf(buf, "%20s", modestr) != 0)
-		return bond_parm_tbl_lookup_name(modestr, tbl);
-	else if (sscanf(buf, "%d", &modeint) != 0)
-		return bond_parm_tbl_lookup(modeint, tbl);
-
-	return -1;
-}
-
 static int bond_check_params(struct bond_params *params)
 {
 	int arp_validate_value, fail_over_mac_value, primary_reselect_value, i;
diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h
index 63ee116adfab..1680fd235659 100644
--- a/drivers/net/bonding/bonding.h
+++ b/drivers/net/bonding/bonding.h
@@ -495,8 +495,6 @@ void bond_sysfs_slave_del(struct slave *slave);
 int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev);
 int bond_release(struct net_device *bond_dev, struct net_device *slave_dev);
 int bond_xmit_hash(struct bonding *bond, struct sk_buff *skb, int count);
-int bond_parse_parm(const char *mode_arg, const struct bond_parm_tbl *tbl);
-int bond_parm_tbl_lookup(int mode, const struct bond_parm_tbl *tbl);
 void bond_select_active_slave(struct bonding *bond);
 void bond_change_active_slave(struct bonding *bond, struct slave *new_active);
 void bond_create_debugfs(void);
-- 
cgit v1.2.2


From f3253339a47ff3690ce52e2acd95ec295f8521b3 Mon Sep 17 00:00:00 2001
From: stephen hemminger <stephen@networkplumber.org>
Date: Tue, 4 Mar 2014 16:36:44 -0800
Subject: bonding: options handling cleanup

Make local functions static (ie. only used in bond_options.c)
Make bond options parsing tables constant.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_main.c    |   3 +-
 drivers/net/bonding/bond_options.c | 190 ++++++++++++++++++++++++-------------
 drivers/net/bonding/bond_options.h |  57 ++---------
 drivers/net/bonding/bond_sysfs.c   |  16 ++--
 drivers/net/bonding/bonding.h      |   2 -
 5 files changed, 141 insertions(+), 127 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index e299c54ec185..324389b44915 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -3950,7 +3950,8 @@ static void bond_uninit(struct net_device *bond_dev)
 static int bond_check_params(struct bond_params *params)
 {
 	int arp_validate_value, fail_over_mac_value, primary_reselect_value, i;
-	struct bond_opt_value newval, *valptr;
+	struct bond_opt_value newval;
+	const struct bond_opt_value *valptr;
 	int arp_all_targets_value;
 
 	/*
diff --git a/drivers/net/bonding/bond_options.c b/drivers/net/bonding/bond_options.c
index 23f365510b58..fc6d25e7d053 100644
--- a/drivers/net/bonding/bond_options.c
+++ b/drivers/net/bonding/bond_options.c
@@ -20,7 +20,59 @@
 #include <linux/inet.h>
 #include "bonding.h"
 
-static struct bond_opt_value bond_mode_tbl[] = {
+static int bond_option_active_slave_set(struct bonding *bond,
+					struct bond_opt_value *newval);
+static int bond_option_miimon_set(struct bonding *bond,
+				  struct bond_opt_value *newval);
+static int bond_option_updelay_set(struct bonding *bond,
+				   struct bond_opt_value *newval);
+static int bond_option_downdelay_set(struct bonding *bond,
+				     struct bond_opt_value *newval);
+static int bond_option_use_carrier_set(struct bonding *bond,
+				       struct bond_opt_value *newval);
+static int bond_option_arp_interval_set(struct bonding *bond,
+					struct bond_opt_value *newval);
+static int bond_option_arp_ip_target_add(struct bonding *bond, __be32 target);
+static int bond_option_arp_ip_target_rem(struct bonding *bond, __be32 target);
+static int bond_option_arp_ip_targets_set(struct bonding *bond,
+					  struct bond_opt_value *newval);
+static int bond_option_arp_validate_set(struct bonding *bond,
+					struct bond_opt_value *newval);
+static int bond_option_arp_all_targets_set(struct bonding *bond,
+					   struct bond_opt_value *newval);
+static int bond_option_primary_set(struct bonding *bond,
+				   struct bond_opt_value *newval);
+static int bond_option_primary_reselect_set(struct bonding *bond,
+					    struct bond_opt_value *newval);
+static int bond_option_fail_over_mac_set(struct bonding *bond,
+					 struct bond_opt_value *newval);
+static int bond_option_xmit_hash_policy_set(struct bonding *bond,
+					    struct bond_opt_value *newval);
+static int bond_option_resend_igmp_set(struct bonding *bond,
+				       struct bond_opt_value *newval);
+static int bond_option_num_peer_notif_set(struct bonding *bond,
+					  struct bond_opt_value *newval);
+static int bond_option_all_slaves_active_set(struct bonding *bond,
+					     struct bond_opt_value *newval);
+static int bond_option_min_links_set(struct bonding *bond,
+				     struct bond_opt_value *newval);
+static int bond_option_lp_interval_set(struct bonding *bond,
+				       struct bond_opt_value *newval);
+static int bond_option_pps_set(struct bonding *bond,
+			       struct bond_opt_value *newval);
+static int bond_option_lacp_rate_set(struct bonding *bond,
+				     struct bond_opt_value *newval);
+static int bond_option_ad_select_set(struct bonding *bond,
+				     struct bond_opt_value *newval);
+static int bond_option_queue_id_set(struct bonding *bond,
+				    struct bond_opt_value *newval);
+static int bond_option_mode_set(struct bonding *bond,
+				struct bond_opt_value *newval);
+static int bond_option_slaves_set(struct bonding *bond,
+				  struct bond_opt_value *newval);
+
+
+static const struct bond_opt_value bond_mode_tbl[] = {
 	{ "balance-rr",    BOND_MODE_ROUNDROBIN,   BOND_VALFLAG_DEFAULT},
 	{ "active-backup", BOND_MODE_ACTIVEBACKUP, 0},
 	{ "balance-xor",   BOND_MODE_XOR,          0},
@@ -31,13 +83,13 @@ static struct bond_opt_value bond_mode_tbl[] = {
 	{ NULL,            -1,                     0},
 };
 
-static struct bond_opt_value bond_pps_tbl[] = {
+static const struct bond_opt_value bond_pps_tbl[] = {
 	{ "default", 1,         BOND_VALFLAG_DEFAULT},
 	{ "maxval",  USHRT_MAX, BOND_VALFLAG_MAX},
 	{ NULL,      -1,        0},
 };
 
-static struct bond_opt_value bond_xmit_hashtype_tbl[] = {
+static const struct bond_opt_value bond_xmit_hashtype_tbl[] = {
 	{ "layer2",   BOND_XMIT_POLICY_LAYER2, BOND_VALFLAG_DEFAULT},
 	{ "layer3+4", BOND_XMIT_POLICY_LAYER34, 0},
 	{ "layer2+3", BOND_XMIT_POLICY_LAYER23, 0},
@@ -46,7 +98,7 @@ static struct bond_opt_value bond_xmit_hashtype_tbl[] = {
 	{ NULL,       -1,                       0},
 };
 
-static struct bond_opt_value bond_arp_validate_tbl[] = {
+static const struct bond_opt_value bond_arp_validate_tbl[] = {
 	{ "none",		BOND_ARP_VALIDATE_NONE,		BOND_VALFLAG_DEFAULT},
 	{ "active",		BOND_ARP_VALIDATE_ACTIVE,	0},
 	{ "backup",		BOND_ARP_VALIDATE_BACKUP,	0},
@@ -57,76 +109,76 @@ static struct bond_opt_value bond_arp_validate_tbl[] = {
 	{ NULL,			-1,				0},
 };
 
-static struct bond_opt_value bond_arp_all_targets_tbl[] = {
+static const struct bond_opt_value bond_arp_all_targets_tbl[] = {
 	{ "any", BOND_ARP_TARGETS_ANY, BOND_VALFLAG_DEFAULT},
 	{ "all", BOND_ARP_TARGETS_ALL, 0},
 	{ NULL,  -1,                   0},
 };
 
-static struct bond_opt_value bond_fail_over_mac_tbl[] = {
+static const struct bond_opt_value bond_fail_over_mac_tbl[] = {
 	{ "none",   BOND_FOM_NONE,   BOND_VALFLAG_DEFAULT},
 	{ "active", BOND_FOM_ACTIVE, 0},
 	{ "follow", BOND_FOM_FOLLOW, 0},
 	{ NULL,     -1,              0},
 };
 
-static struct bond_opt_value bond_intmax_tbl[] = {
+static const struct bond_opt_value bond_intmax_tbl[] = {
 	{ "off",     0,       BOND_VALFLAG_DEFAULT},
 	{ "maxval",  INT_MAX, BOND_VALFLAG_MAX},
 };
 
-static struct bond_opt_value bond_lacp_rate_tbl[] = {
+static const struct bond_opt_value bond_lacp_rate_tbl[] = {
 	{ "slow", AD_LACP_SLOW, 0},
 	{ "fast", AD_LACP_FAST, 0},
 	{ NULL,   -1,           0},
 };
 
-static struct bond_opt_value bond_ad_select_tbl[] = {
+static const struct bond_opt_value bond_ad_select_tbl[] = {
 	{ "stable",    BOND_AD_STABLE,    BOND_VALFLAG_DEFAULT},
 	{ "bandwidth", BOND_AD_BANDWIDTH, 0},
 	{ "count",     BOND_AD_COUNT,     0},
 	{ NULL,        -1,                0},
 };
 
-static struct bond_opt_value bond_num_peer_notif_tbl[] = {
+static const struct bond_opt_value bond_num_peer_notif_tbl[] = {
 	{ "off",     0,   0},
 	{ "maxval",  255, BOND_VALFLAG_MAX},
 	{ "default", 1,   BOND_VALFLAG_DEFAULT},
 	{ NULL,      -1,  0}
 };
 
-static struct bond_opt_value bond_primary_reselect_tbl[] = {
+static const struct bond_opt_value bond_primary_reselect_tbl[] = {
 	{ "always",  BOND_PRI_RESELECT_ALWAYS,  BOND_VALFLAG_DEFAULT},
 	{ "better",  BOND_PRI_RESELECT_BETTER,  0},
 	{ "failure", BOND_PRI_RESELECT_FAILURE, 0},
 	{ NULL,      -1},
 };
 
-static struct bond_opt_value bond_use_carrier_tbl[] = {
+static const struct bond_opt_value bond_use_carrier_tbl[] = {
 	{ "off", 0,  0},
 	{ "on",  1,  BOND_VALFLAG_DEFAULT},
 	{ NULL,  -1, 0}
 };
 
-static struct bond_opt_value bond_all_slaves_active_tbl[] = {
+static const struct bond_opt_value bond_all_slaves_active_tbl[] = {
 	{ "off", 0,  BOND_VALFLAG_DEFAULT},
 	{ "on",  1,  0},
 	{ NULL,  -1, 0}
 };
 
-static struct bond_opt_value bond_resend_igmp_tbl[] = {
+static const struct bond_opt_value bond_resend_igmp_tbl[] = {
 	{ "off",     0,   0},
 	{ "maxval",  255, BOND_VALFLAG_MAX},
 	{ "default", 1,   BOND_VALFLAG_DEFAULT},
 	{ NULL,      -1,  0}
 };
 
-static struct bond_opt_value bond_lp_interval_tbl[] = {
+static const struct bond_opt_value bond_lp_interval_tbl[] = {
 	{ "minval",  1,       BOND_VALFLAG_MIN | BOND_VALFLAG_DEFAULT},
 	{ "maxval",  INT_MAX, BOND_VALFLAG_MAX},
 };
 
-static struct bond_option bond_opts[] = {
+static const struct bond_option bond_opts[] = {
 	[BOND_OPT_MODE] = {
 		.id = BOND_OPT_MODE,
 		.name = "mode",
@@ -315,9 +367,9 @@ static struct bond_option bond_opts[] = {
 };
 
 /* Searches for a value in opt's values[] table */
-struct bond_opt_value *bond_opt_get_val(unsigned int option, u64 val)
+const struct bond_opt_value *bond_opt_get_val(unsigned int option, u64 val)
 {
-	struct bond_option *opt;
+	const struct bond_option *opt;
 	int i;
 
 	opt = bond_opt_get(option);
@@ -331,7 +383,7 @@ struct bond_opt_value *bond_opt_get_val(unsigned int option, u64 val)
 }
 
 /* Searches for a value in opt's values[] table which matches the flagmask */
-static struct bond_opt_value *bond_opt_get_flags(const struct bond_option *opt,
+static const struct bond_opt_value *bond_opt_get_flags(const struct bond_option *opt,
 						 u32 flagmask)
 {
 	int i;
@@ -348,7 +400,7 @@ static struct bond_opt_value *bond_opt_get_flags(const struct bond_option *opt,
  */
 static bool bond_opt_check_range(const struct bond_option *opt, u64 val)
 {
-	struct bond_opt_value *minval, *maxval;
+	const struct bond_opt_value *minval, *maxval;
 
 	minval = bond_opt_get_flags(opt, BOND_VALFLAG_MIN);
 	maxval = bond_opt_get_flags(opt, BOND_VALFLAG_MAX);
@@ -368,11 +420,12 @@ static bool bond_opt_check_range(const struct bond_option *opt, u64 val)
  * or the struct_opt_value that matched. It also strips the new line from
  * @val->string if it's present.
  */
-struct bond_opt_value *bond_opt_parse(const struct bond_option *opt,
-				      struct bond_opt_value *val)
+const struct bond_opt_value *bond_opt_parse(const struct bond_option *opt,
+					    struct bond_opt_value *val)
 {
 	char *p, valstr[BOND_OPT_MAX_NAMELEN + 1] = { 0, };
-	struct bond_opt_value *tbl, *ret = NULL;
+	const struct bond_opt_value *tbl;
+	const struct bond_opt_value *ret = NULL;
 	bool checkval;
 	int i, rv;
 
@@ -576,7 +629,7 @@ int bond_opt_tryset_rtnl(struct bonding *bond, unsigned int option, char *buf)
  * This function checks if option is valid and if so returns a pointer
  * to its entry in the bond_opts[] option array.
  */
-struct bond_option *bond_opt_get(unsigned int option)
+const struct bond_option *bond_opt_get(unsigned int option)
 {
 	if (!BOND_OPT_VALID(option))
 		return NULL;
@@ -622,8 +675,8 @@ struct net_device *bond_option_active_slave_get(struct bonding *bond)
 	return __bond_option_active_slave_get(bond, bond->curr_active_slave);
 }
 
-int bond_option_active_slave_set(struct bonding *bond,
-				 struct bond_opt_value *newval)
+static int bond_option_active_slave_set(struct bonding *bond,
+					struct bond_opt_value *newval)
 {
 	char ifname[IFNAMSIZ] = { 0, };
 	struct net_device *slave_dev;
@@ -691,7 +744,8 @@ int bond_option_active_slave_set(struct bonding *bond,
 	return ret;
 }
 
-int bond_option_miimon_set(struct bonding *bond, struct bond_opt_value *newval)
+static int bond_option_miimon_set(struct bonding *bond,
+				  struct bond_opt_value *newval)
 {
 	pr_info("%s: Setting MII monitoring interval to %llu\n",
 		bond->dev->name, newval->value);
@@ -728,7 +782,8 @@ int bond_option_miimon_set(struct bonding *bond, struct bond_opt_value *newval)
 	return 0;
 }
 
-int bond_option_updelay_set(struct bonding *bond, struct bond_opt_value *newval)
+static int bond_option_updelay_set(struct bonding *bond,
+				   struct bond_opt_value *newval)
 {
 	int value = newval->value;
 
@@ -751,8 +806,8 @@ int bond_option_updelay_set(struct bonding *bond, struct bond_opt_value *newval)
 	return 0;
 }
 
-int bond_option_downdelay_set(struct bonding *bond,
-			      struct bond_opt_value *newval)
+static int bond_option_downdelay_set(struct bonding *bond,
+				     struct bond_opt_value *newval)
 {
 	int value = newval->value;
 
@@ -775,8 +830,8 @@ int bond_option_downdelay_set(struct bonding *bond,
 	return 0;
 }
 
-int bond_option_use_carrier_set(struct bonding *bond,
-				struct bond_opt_value *newval)
+static int bond_option_use_carrier_set(struct bonding *bond,
+				       struct bond_opt_value *newval)
 {
 	pr_info("%s: Setting use_carrier to %llu\n",
 		bond->dev->name, newval->value);
@@ -785,8 +840,8 @@ int bond_option_use_carrier_set(struct bonding *bond,
 	return 0;
 }
 
-int bond_option_arp_interval_set(struct bonding *bond,
-				 struct bond_opt_value *newval)
+static int bond_option_arp_interval_set(struct bonding *bond,
+					struct bond_opt_value *newval)
 {
 	pr_info("%s: Setting ARP monitoring interval to %llu\n",
 		bond->dev->name, newval->value);
@@ -867,7 +922,7 @@ static int _bond_option_arp_ip_target_add(struct bonding *bond, __be32 target)
 	return 0;
 }
 
-int bond_option_arp_ip_target_add(struct bonding *bond, __be32 target)
+static int bond_option_arp_ip_target_add(struct bonding *bond, __be32 target)
 {
 	int ret;
 
@@ -879,7 +934,7 @@ int bond_option_arp_ip_target_add(struct bonding *bond, __be32 target)
 	return ret;
 }
 
-int bond_option_arp_ip_target_rem(struct bonding *bond, __be32 target)
+static int bond_option_arp_ip_target_rem(struct bonding *bond, __be32 target)
 {
 	__be32 *targets = bond->params.arp_targets;
 	struct list_head *iter;
@@ -935,8 +990,8 @@ void bond_option_arp_ip_targets_clear(struct bonding *bond)
 	write_unlock_bh(&bond->lock);
 }
 
-int bond_option_arp_ip_targets_set(struct bonding *bond,
-				   struct bond_opt_value *newval)
+static int bond_option_arp_ip_targets_set(struct bonding *bond,
+					  struct bond_opt_value *newval)
 {
 	int ret = -EPERM;
 	__be32 target;
@@ -962,8 +1017,8 @@ int bond_option_arp_ip_targets_set(struct bonding *bond,
 	return ret;
 }
 
-int bond_option_arp_validate_set(struct bonding *bond,
-				 struct bond_opt_value *newval)
+static int bond_option_arp_validate_set(struct bonding *bond,
+					struct bond_opt_value *newval)
 {
 	pr_info("%s: Setting arp_validate to %s (%llu)\n",
 		bond->dev->name, newval->string, newval->value);
@@ -979,8 +1034,8 @@ int bond_option_arp_validate_set(struct bonding *bond,
 	return 0;
 }
 
-int bond_option_arp_all_targets_set(struct bonding *bond,
-				    struct bond_opt_value *newval)
+static int bond_option_arp_all_targets_set(struct bonding *bond,
+					   struct bond_opt_value *newval)
 {
 	pr_info("%s: Setting arp_all_targets to %s (%llu)\n",
 		bond->dev->name, newval->string, newval->value);
@@ -989,7 +1044,8 @@ int bond_option_arp_all_targets_set(struct bonding *bond,
 	return 0;
 }
 
-int bond_option_primary_set(struct bonding *bond, struct bond_opt_value *newval)
+static int bond_option_primary_set(struct bonding *bond,
+				   struct bond_opt_value *newval)
 {
 	char *p, *primary = newval->string;
 	struct list_head *iter;
@@ -1041,8 +1097,8 @@ out:
 	return 0;
 }
 
-int bond_option_primary_reselect_set(struct bonding *bond,
-				     struct bond_opt_value *newval)
+static int bond_option_primary_reselect_set(struct bonding *bond,
+					    struct bond_opt_value *newval)
 {
 	pr_info("%s: Setting primary_reselect to %s (%llu)\n",
 		bond->dev->name, newval->string, newval->value);
@@ -1057,8 +1113,8 @@ int bond_option_primary_reselect_set(struct bonding *bond,
 	return 0;
 }
 
-int bond_option_fail_over_mac_set(struct bonding *bond,
-				  struct bond_opt_value *newval)
+static int bond_option_fail_over_mac_set(struct bonding *bond,
+					 struct bond_opt_value *newval)
 {
 	pr_info("%s: Setting fail_over_mac to %s (%llu)\n",
 		bond->dev->name, newval->string, newval->value);
@@ -1067,8 +1123,8 @@ int bond_option_fail_over_mac_set(struct bonding *bond,
 	return 0;
 }
 
-int bond_option_xmit_hash_policy_set(struct bonding *bond,
-				     struct bond_opt_value *newval)
+static int bond_option_xmit_hash_policy_set(struct bonding *bond,
+					    struct bond_opt_value *newval)
 {
 	pr_info("%s: Setting xmit hash policy to %s (%llu)\n",
 		bond->dev->name, newval->string, newval->value);
@@ -1077,8 +1133,8 @@ int bond_option_xmit_hash_policy_set(struct bonding *bond,
 	return 0;
 }
 
-int bond_option_resend_igmp_set(struct bonding *bond,
-				struct bond_opt_value *newval)
+static int bond_option_resend_igmp_set(struct bonding *bond,
+				       struct bond_opt_value *newval)
 {
 	pr_info("%s: Setting resend_igmp to %llu\n",
 		bond->dev->name, newval->value);
@@ -1087,7 +1143,7 @@ int bond_option_resend_igmp_set(struct bonding *bond,
 	return 0;
 }
 
-int bond_option_num_peer_notif_set(struct bonding *bond,
+static int bond_option_num_peer_notif_set(struct bonding *bond,
 				   struct bond_opt_value *newval)
 {
 	bond->params.num_peer_notif = newval->value;
@@ -1095,8 +1151,8 @@ int bond_option_num_peer_notif_set(struct bonding *bond,
 	return 0;
 }
 
-int bond_option_all_slaves_active_set(struct bonding *bond,
-				      struct bond_opt_value *newval)
+static int bond_option_all_slaves_active_set(struct bonding *bond,
+					     struct bond_opt_value *newval)
 {
 	struct list_head *iter;
 	struct slave *slave;
@@ -1116,8 +1172,8 @@ int bond_option_all_slaves_active_set(struct bonding *bond,
 	return 0;
 }
 
-int bond_option_min_links_set(struct bonding *bond,
-			      struct bond_opt_value *newval)
+static int bond_option_min_links_set(struct bonding *bond,
+				     struct bond_opt_value *newval)
 {
 	pr_info("%s: Setting min links value to %llu\n",
 		bond->dev->name, newval->value);
@@ -1126,15 +1182,16 @@ int bond_option_min_links_set(struct bonding *bond,
 	return 0;
 }
 
-int bond_option_lp_interval_set(struct bonding *bond,
-				struct bond_opt_value *newval)
+static int bond_option_lp_interval_set(struct bonding *bond,
+				       struct bond_opt_value *newval)
 {
 	bond->params.lp_interval = newval->value;
 
 	return 0;
 }
 
-int bond_option_pps_set(struct bonding *bond, struct bond_opt_value *newval)
+static int bond_option_pps_set(struct bonding *bond,
+			       struct bond_opt_value *newval)
 {
 	bond->params.packets_per_slave = newval->value;
 	if (newval->value > 0) {
@@ -1151,8 +1208,8 @@ int bond_option_pps_set(struct bonding *bond, struct bond_opt_value *newval)
 	return 0;
 }
 
-int bond_option_lacp_rate_set(struct bonding *bond,
-			      struct bond_opt_value *newval)
+static int bond_option_lacp_rate_set(struct bonding *bond,
+				     struct bond_opt_value *newval)
 {
 	pr_info("%s: Setting LACP rate to %s (%llu)\n",
 		bond->dev->name, newval->string, newval->value);
@@ -1162,8 +1219,8 @@ int bond_option_lacp_rate_set(struct bonding *bond,
 	return 0;
 }
 
-int bond_option_ad_select_set(struct bonding *bond,
-			      struct bond_opt_value *newval)
+static int bond_option_ad_select_set(struct bonding *bond,
+				     struct bond_opt_value *newval)
 {
 	pr_info("%s: Setting ad_select to %s (%llu)\n",
 		bond->dev->name, newval->string, newval->value);
@@ -1172,8 +1229,8 @@ int bond_option_ad_select_set(struct bonding *bond,
 	return 0;
 }
 
-int bond_option_queue_id_set(struct bonding *bond,
-			     struct bond_opt_value *newval)
+static int bond_option_queue_id_set(struct bonding *bond,
+				    struct bond_opt_value *newval)
 {
 	struct slave *slave, *update_slave;
 	struct net_device *sdev;
@@ -1233,7 +1290,8 @@ err_no_cmd:
 
 }
 
-int bond_option_slaves_set(struct bonding *bond, struct bond_opt_value *newval)
+static int bond_option_slaves_set(struct bonding *bond,
+				  struct bond_opt_value *newval)
 {
 	char command[IFNAMSIZ + 1] = { 0, };
 	struct net_device *dev;
diff --git a/drivers/net/bonding/bond_options.h b/drivers/net/bonding/bond_options.h
index 433d37f6940b..6c5ba0ffc31c 100644
--- a/drivers/net/bonding/bond_options.h
+++ b/drivers/net/bonding/bond_options.h
@@ -81,8 +81,8 @@ struct bonding;
 
 struct bond_option {
 	int id;
-	char *name;
-	char *desc;
+	const char *name;
+	const char *desc;
 	u32 flags;
 
 	/* unsuppmodes is used to denote modes in which the option isn't
@@ -92,7 +92,7 @@ struct bond_option {
 	/* supported values which this option can have, can be a subset of
 	 * BOND_OPTVAL_RANGE's value range
 	 */
-	struct bond_opt_value *values;
+	const struct bond_opt_value *values;
 
 	int (*set)(struct bonding *bond, struct bond_opt_value *val);
 };
@@ -100,10 +100,10 @@ struct bond_option {
 int __bond_opt_set(struct bonding *bond, unsigned int option,
 		   struct bond_opt_value *val);
 int bond_opt_tryset_rtnl(struct bonding *bond, unsigned int option, char *buf);
-struct bond_opt_value *bond_opt_parse(const struct bond_option *opt,
+const struct bond_opt_value *bond_opt_parse(const struct bond_option *opt,
 				      struct bond_opt_value *val);
-struct bond_option *bond_opt_get(unsigned int option);
-struct bond_opt_value *bond_opt_get_val(unsigned int option, u64 val);
+const struct bond_option *bond_opt_get(unsigned int option);
+const struct bond_opt_value *bond_opt_get_val(unsigned int option, u64 val);
 
 /* This helper is used to initialize a bond_opt_value structure for parameter
  * passing. There should be either a valid string or value, but not both.
@@ -122,49 +122,6 @@ static inline void __bond_opt_init(struct bond_opt_value *optval,
 #define bond_opt_initval(optval, value) __bond_opt_init(optval, NULL, value)
 #define bond_opt_initstr(optval, str) __bond_opt_init(optval, str, ULLONG_MAX)
 
-int bond_option_mode_set(struct bonding *bond, struct bond_opt_value *newval);
-int bond_option_pps_set(struct bonding *bond, struct bond_opt_value *newval);
-int bond_option_xmit_hash_policy_set(struct bonding *bond,
-				     struct bond_opt_value *newval);
-int bond_option_arp_validate_set(struct bonding *bond,
-				 struct bond_opt_value *newval);
-int bond_option_arp_all_targets_set(struct bonding *bond,
-				    struct bond_opt_value *newval);
-int bond_option_fail_over_mac_set(struct bonding *bond,
-				  struct bond_opt_value *newval);
-int bond_option_arp_interval_set(struct bonding *bond,
-				 struct bond_opt_value *newval);
-int bond_option_arp_ip_targets_set(struct bonding *bond,
-				   struct bond_opt_value *newval);
 void bond_option_arp_ip_targets_clear(struct bonding *bond);
-int bond_option_downdelay_set(struct bonding *bond,
-			      struct bond_opt_value *newval);
-int bond_option_updelay_set(struct bonding *bond,
-			    struct bond_opt_value *newval);
-int bond_option_lacp_rate_set(struct bonding *bond,
-			      struct bond_opt_value *newval);
-int bond_option_min_links_set(struct bonding *bond,
-			      struct bond_opt_value *newval);
-int bond_option_ad_select_set(struct bonding *bond,
-			      struct bond_opt_value *newval);
-int bond_option_num_peer_notif_set(struct bonding *bond,
-				   struct bond_opt_value *newval);
-int bond_option_miimon_set(struct bonding *bond, struct bond_opt_value *newval);
-int bond_option_primary_set(struct bonding *bond,
-			    struct bond_opt_value *newval);
-int bond_option_primary_reselect_set(struct bonding *bond,
-				     struct bond_opt_value *newval);
-int bond_option_use_carrier_set(struct bonding *bond,
-				struct bond_opt_value *newval);
-int bond_option_active_slave_set(struct bonding *bond,
-				 struct bond_opt_value *newval);
-int bond_option_queue_id_set(struct bonding *bond,
-			     struct bond_opt_value *newval);
-int bond_option_all_slaves_active_set(struct bonding *bond,
-				      struct bond_opt_value *newval);
-int bond_option_resend_igmp_set(struct bonding *bond,
-				struct bond_opt_value *newval);
-int bond_option_lp_interval_set(struct bonding *bond,
-				struct bond_opt_value *newval);
-int bond_option_slaves_set(struct bonding *bond, struct bond_opt_value *newval);
+
 #endif /* _BOND_OPTIONS_H */
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index 225ee696db05..0e8b268da0a0 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -220,7 +220,7 @@ static ssize_t bonding_show_mode(struct device *d,
 				 struct device_attribute *attr, char *buf)
 {
 	struct bonding *bond = to_bond(d);
-	struct bond_opt_value *val;
+	const struct bond_opt_value *val;
 
 	val = bond_opt_get_val(BOND_OPT_MODE, bond->params.mode);
 
@@ -251,7 +251,7 @@ static ssize_t bonding_show_xmit_hash(struct device *d,
 				      char *buf)
 {
 	struct bonding *bond = to_bond(d);
-	struct bond_opt_value *val;
+	const struct bond_opt_value *val;
 
 	val = bond_opt_get_val(BOND_OPT_XMIT_HASH, bond->params.xmit_policy);
 
@@ -282,7 +282,7 @@ static ssize_t bonding_show_arp_validate(struct device *d,
 					 char *buf)
 {
 	struct bonding *bond = to_bond(d);
-	struct bond_opt_value *val;
+	const struct bond_opt_value *val;
 
 	val = bond_opt_get_val(BOND_OPT_ARP_VALIDATE,
 			       bond->params.arp_validate);
@@ -314,7 +314,7 @@ static ssize_t bonding_show_arp_all_targets(struct device *d,
 					 char *buf)
 {
 	struct bonding *bond = to_bond(d);
-	struct bond_opt_value *val;
+	const struct bond_opt_value *val;
 
 	val = bond_opt_get_val(BOND_OPT_ARP_ALL_TARGETS,
 			       bond->params.arp_all_targets);
@@ -348,7 +348,7 @@ static ssize_t bonding_show_fail_over_mac(struct device *d,
 					  char *buf)
 {
 	struct bonding *bond = to_bond(d);
-	struct bond_opt_value *val;
+	const struct bond_opt_value *val;
 
 	val = bond_opt_get_val(BOND_OPT_FAIL_OVER_MAC,
 			       bond->params.fail_over_mac);
@@ -505,7 +505,7 @@ static ssize_t bonding_show_lacp(struct device *d,
 				 char *buf)
 {
 	struct bonding *bond = to_bond(d);
-	struct bond_opt_value *val;
+	const struct bond_opt_value *val;
 
 	val = bond_opt_get_val(BOND_OPT_LACP_RATE, bond->params.lacp_fast);
 
@@ -558,7 +558,7 @@ static ssize_t bonding_show_ad_select(struct device *d,
 				      char *buf)
 {
 	struct bonding *bond = to_bond(d);
-	struct bond_opt_value *val;
+	const struct bond_opt_value *val;
 
 	val = bond_opt_get_val(BOND_OPT_AD_SELECT, bond->params.ad_select);
 
@@ -686,7 +686,7 @@ static ssize_t bonding_show_primary_reselect(struct device *d,
 					     char *buf)
 {
 	struct bonding *bond = to_bond(d);
-	struct bond_opt_value *val;
+	const struct bond_opt_value *val;
 
 	val = bond_opt_get_val(BOND_OPT_PRIMARY_RESELECT,
 			       bond->params.primary_reselect);
diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h
index 1680fd235659..0896f1db24db 100644
--- a/drivers/net/bonding/bonding.h
+++ b/drivers/net/bonding/bonding.h
@@ -507,8 +507,6 @@ void bond_setup(struct net_device *bond_dev);
 unsigned int bond_get_num_tx_queues(void);
 int bond_netlink_init(void);
 void bond_netlink_fini(void);
-int bond_option_arp_ip_target_add(struct bonding *bond, __be32 target);
-int bond_option_arp_ip_target_rem(struct bonding *bond, __be32 target);
 struct net_device *bond_option_active_slave_get_rcu(struct bonding *bond);
 struct net_device *bond_option_active_slave_get(struct bonding *bond);
 const char *bond_slave_link_status(s8 link);
-- 
cgit v1.2.2


From 1e6cacdbae2701d33068eebb8d453d67f962cd93 Mon Sep 17 00:00:00 2001
From: Alexander Shiyan <shc_work@mail.ru>
Date: Wed, 5 Mar 2014 21:31:56 +0400
Subject: can: mcp251x: Make driver more quiet

This patch moves one diagnostic message used for debugging purposes
to dev_dbg() and removes one useless message.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/mcp251x.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/can/mcp251x.c b/drivers/net/can/mcp251x.c
index cdb9808d12db..7cc9705bfa4b 100644
--- a/drivers/net/can/mcp251x.c
+++ b/drivers/net/can/mcp251x.c
@@ -601,10 +601,10 @@ static int mcp251x_do_set_bittiming(struct net_device *net)
 			  (bt->prop_seg - 1));
 	mcp251x_write_bits(spi, CNF3, CNF3_PHSEG2_MASK,
 			   (bt->phase_seg2 - 1));
-	dev_info(&spi->dev, "CNF: 0x%02x 0x%02x 0x%02x\n",
-		 mcp251x_read_reg(spi, CNF1),
-		 mcp251x_read_reg(spi, CNF2),
-		 mcp251x_read_reg(spi, CNF3));
+	dev_dbg(&spi->dev, "CNF: 0x%02x 0x%02x 0x%02x\n",
+		mcp251x_read_reg(spi, CNF1),
+		mcp251x_read_reg(spi, CNF2),
+		mcp251x_read_reg(spi, CNF3));
 
 	return 0;
 }
@@ -1155,8 +1155,6 @@ static int mcp251x_can_probe(struct spi_device *spi)
 
 	devm_can_led_init(net);
 
-	dev_info(&spi->dev, "probed\n");
-
 	return ret;
 
 error_probe:
-- 
cgit v1.2.2


From f16a42107377e892d6d4535bbfc46308b4a1cdea Mon Sep 17 00:00:00 2001
From: Alexander Shiyan <shc_work@mail.ru>
Date: Sat, 22 Feb 2014 09:51:14 +0400
Subject: can: mcp251x: Remove #ifdef CONFIG_PM_SLEEP

This patch removes #ifdef CONFIG_PM_SLEEP to improve compile coverage.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/mcp251x.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/can/mcp251x.c b/drivers/net/can/mcp251x.c
index 7cc9705bfa4b..50aa630c7dd4 100644
--- a/drivers/net/can/mcp251x.c
+++ b/drivers/net/can/mcp251x.c
@@ -1195,9 +1195,7 @@ static int mcp251x_can_remove(struct spi_device *spi)
 	return 0;
 }
 
-#ifdef CONFIG_PM_SLEEP
-
-static int mcp251x_can_suspend(struct device *dev)
+static int __maybe_unused mcp251x_can_suspend(struct device *dev)
 {
 	struct spi_device *spi = to_spi_device(dev);
 	struct mcp251x_priv *priv = spi_get_drvdata(spi);
@@ -1227,7 +1225,7 @@ static int mcp251x_can_suspend(struct device *dev)
 	return 0;
 }
 
-static int mcp251x_can_resume(struct device *dev)
+static int __maybe_unused mcp251x_can_resume(struct device *dev)
 {
 	struct spi_device *spi = to_spi_device(dev);
 	struct mcp251x_priv *priv = spi_get_drvdata(spi);
@@ -1247,7 +1245,6 @@ static int mcp251x_can_resume(struct device *dev)
 	enable_irq(spi->irq);
 	return 0;
 }
-#endif
 
 static SIMPLE_DEV_PM_OPS(mcp251x_can_pm_ops, mcp251x_can_suspend,
 	mcp251x_can_resume);
-- 
cgit v1.2.2


From 08c6d35154069becb01243176fb72b3bc60ff3cb Mon Sep 17 00:00:00 2001
From: Marc Kleine-Budde <mkl@pengutronix.de>
Date: Wed, 5 Mar 2014 19:10:44 +0100
Subject: can: flexcan: Remove #ifdef CONFIG_PM_SLEEP

This patch removes #ifdef CONFIG_PM_SLEEP to improve compile coverage.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/flexcan.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index 61376abdab39..efa1bbc9a1ec 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -1201,8 +1201,7 @@ static int flexcan_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_PM_SLEEP
-static int flexcan_suspend(struct device *device)
+static int __maybe_unused flexcan_suspend(struct device *device)
 {
 	struct net_device *dev = dev_get_drvdata(device);
 	struct flexcan_priv *priv = netdev_priv(dev);
@@ -1221,7 +1220,7 @@ static int flexcan_suspend(struct device *device)
 	return 0;
 }
 
-static int flexcan_resume(struct device *device)
+static int __maybe_unused flexcan_resume(struct device *device)
 {
 	struct net_device *dev = dev_get_drvdata(device);
 	struct flexcan_priv *priv = netdev_priv(dev);
@@ -1233,7 +1232,6 @@ static int flexcan_resume(struct device *device)
 	}
 	return flexcan_chip_enable(priv);
 }
-#endif /* CONFIG_PM_SLEEP */
 
 static SIMPLE_DEV_PM_OPS(flexcan_pm_ops, flexcan_suspend, flexcan_resume);
 
-- 
cgit v1.2.2


From d0873e6fc06686cf2dfb9adabb6ca65e9967c60f Mon Sep 17 00:00:00 2001
From: Marc Kleine-Budde <mkl@pengutronix.de>
Date: Tue, 4 Mar 2014 22:04:22 +0100
Subject: can: flexcan: make use of platform_get_device_id()

This patch replaces an open coded pdev->id_entry by platform_get_device_id().

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/flexcan.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index efa1bbc9a1ec..c94d698b73c2 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -1132,9 +1132,9 @@ static int flexcan_probe(struct platform_device *pdev)
 	of_id = of_match_device(flexcan_of_match, &pdev->dev);
 	if (of_id) {
 		devtype_data = of_id->data;
-	} else if (pdev->id_entry->driver_data) {
+	} else if (platform_get_device_id(pdev)->driver_data) {
 		devtype_data = (struct flexcan_devtype_data *)
-			pdev->id_entry->driver_data;
+			platform_get_device_id(pdev)->driver_data;
 	} else {
 		return -ENODEV;
 	}
-- 
cgit v1.2.2


From d0ceebd7508d5bf6e81367640959aef7e0de4947 Mon Sep 17 00:00:00 2001
From: Fengguang Wu <fengguang.wu@intel.com>
Date: Wed, 5 Mar 2014 11:57:23 +0200
Subject: net/mlx4_en: mlx4_en_verify_params() can be static

Fix static error introduced by commit:
b97b33a3df0439401f80f041eda507d4fffa0dbf [645/653] net/mlx4_en: Verify
mlx4_en module parameters

sparse warnings:
drivers/net/ethernet/mellanox/mlx4/en_main.c:335:6: sparse: symbol
'mlx4_en_verify_params' was not declared. Should it be static?

CC: netdev@vger.kernel.org
CC: linux-kernel@vger.kernel.org
CC: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/mellanox/mlx4/en_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/mellanox/mlx4/en_main.c b/drivers/net/ethernet/mellanox/mlx4/en_main.c
index 3454437fcd95..0c59d4fe7e3a 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_main.c
@@ -332,7 +332,7 @@ static struct mlx4_interface mlx4_en_interface = {
 	.protocol	= MLX4_PROT_ETH,
 };
 
-void mlx4_en_verify_params(void)
+static void mlx4_en_verify_params(void)
 {
 	if (pfctx > MAX_PFC_TX) {
 		pr_warn("mlx4_en: WARNING: illegal module parameter pfctx 0x%x - should be in range 0-0x%x, will be changed to default (0)\n",
-- 
cgit v1.2.2


From 5a8a1ab74dce1b50fe27745df477c502aec987eb Mon Sep 17 00:00:00 2001
From: Ivan Vecera <ivecera@redhat.com>
Date: Wed, 5 Mar 2014 11:54:05 +0100
Subject: be2net: do external loopback test only when it is requested

v2: remove unnecessary braces from all 'loopback' if-blocks (thx Sergei)

Cc: sathya.perla@emulex.com
Cc: subbu.seetharaman@emulex.com
Cc: ajit.khaparde@emulex.com
Cc: sergei.shtylyov@cogentembedded.com

Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Acked-by: Ajit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/emulex/benet/be_ethtool.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/emulex/benet/be_ethtool.c b/drivers/net/ethernet/emulex/benet/be_ethtool.c
index cf09d8faca84..66759b6ce373 100644
--- a/drivers/net/ethernet/emulex/benet/be_ethtool.c
+++ b/drivers/net/ethernet/emulex/benet/be_ethtool.c
@@ -802,16 +802,18 @@ be_self_test(struct net_device *netdev, struct ethtool_test *test, u64 *data)
 
 	if (test->flags & ETH_TEST_FL_OFFLINE) {
 		if (be_loopback_test(adapter, BE_MAC_LOOPBACK,
-						&data[0]) != 0) {
+				     &data[0]) != 0)
 			test->flags |= ETH_TEST_FL_FAILED;
-		}
+
 		if (be_loopback_test(adapter, BE_PHY_LOOPBACK,
-						&data[1]) != 0) {
-			test->flags |= ETH_TEST_FL_FAILED;
-		}
-		if (be_loopback_test(adapter, BE_ONE_PORT_EXT_LOOPBACK,
-						&data[2]) != 0) {
+				     &data[1]) != 0)
 			test->flags |= ETH_TEST_FL_FAILED;
+
+		if (test->flags & ETH_TEST_FL_EXTERNAL_LB) {
+			if (be_loopback_test(adapter, BE_ONE_PORT_EXT_LOOPBACK,
+					     &data[2]) != 0)
+				test->flags |= ETH_TEST_FL_FAILED;
+			test->flags |= ETH_TEST_FL_EXTERNAL_LB_DONE;
 		}
 	}
 
-- 
cgit v1.2.2


From 28f084cca35a73698568d8c060bbb98193021db5 Mon Sep 17 00:00:00 2001
From: stephen hemminger <stephen@networkplumber.org>
Date: Thu, 6 Mar 2014 14:20:17 -0800
Subject: bonding: fix const in options processing

This is a fixup patch to resolve issues with const from my earlier patch.
Make all the setter functions use const on input parameter.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_options.c | 104 ++++++++++++++++++-------------------
 drivers/net/bonding/bond_options.h |   5 +-
 drivers/net/bonding/bond_procfs.c  |   2 +-
 3 files changed, 56 insertions(+), 55 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_options.c b/drivers/net/bonding/bond_options.c
index fc6d25e7d053..22800bde9752 100644
--- a/drivers/net/bonding/bond_options.c
+++ b/drivers/net/bonding/bond_options.c
@@ -21,55 +21,55 @@
 #include "bonding.h"
 
 static int bond_option_active_slave_set(struct bonding *bond,
-					struct bond_opt_value *newval);
+					const struct bond_opt_value *newval);
 static int bond_option_miimon_set(struct bonding *bond,
-				  struct bond_opt_value *newval);
+				  const struct bond_opt_value *newval);
 static int bond_option_updelay_set(struct bonding *bond,
-				   struct bond_opt_value *newval);
+				   const struct bond_opt_value *newval);
 static int bond_option_downdelay_set(struct bonding *bond,
-				     struct bond_opt_value *newval);
+				     const struct bond_opt_value *newval);
 static int bond_option_use_carrier_set(struct bonding *bond,
-				       struct bond_opt_value *newval);
+				       const struct bond_opt_value *newval);
 static int bond_option_arp_interval_set(struct bonding *bond,
-					struct bond_opt_value *newval);
+					const struct bond_opt_value *newval);
 static int bond_option_arp_ip_target_add(struct bonding *bond, __be32 target);
 static int bond_option_arp_ip_target_rem(struct bonding *bond, __be32 target);
 static int bond_option_arp_ip_targets_set(struct bonding *bond,
-					  struct bond_opt_value *newval);
+					  const struct bond_opt_value *newval);
 static int bond_option_arp_validate_set(struct bonding *bond,
-					struct bond_opt_value *newval);
+					const struct bond_opt_value *newval);
 static int bond_option_arp_all_targets_set(struct bonding *bond,
-					   struct bond_opt_value *newval);
+					   const struct bond_opt_value *newval);
 static int bond_option_primary_set(struct bonding *bond,
-				   struct bond_opt_value *newval);
+				   const struct bond_opt_value *newval);
 static int bond_option_primary_reselect_set(struct bonding *bond,
-					    struct bond_opt_value *newval);
+					    const struct bond_opt_value *newval);
 static int bond_option_fail_over_mac_set(struct bonding *bond,
-					 struct bond_opt_value *newval);
+					 const struct bond_opt_value *newval);
 static int bond_option_xmit_hash_policy_set(struct bonding *bond,
-					    struct bond_opt_value *newval);
+					    const struct bond_opt_value *newval);
 static int bond_option_resend_igmp_set(struct bonding *bond,
-				       struct bond_opt_value *newval);
+				       const struct bond_opt_value *newval);
 static int bond_option_num_peer_notif_set(struct bonding *bond,
-					  struct bond_opt_value *newval);
+					  const struct bond_opt_value *newval);
 static int bond_option_all_slaves_active_set(struct bonding *bond,
-					     struct bond_opt_value *newval);
+					     const struct bond_opt_value *newval);
 static int bond_option_min_links_set(struct bonding *bond,
-				     struct bond_opt_value *newval);
+				     const struct bond_opt_value *newval);
 static int bond_option_lp_interval_set(struct bonding *bond,
-				       struct bond_opt_value *newval);
+				       const struct bond_opt_value *newval);
 static int bond_option_pps_set(struct bonding *bond,
-			       struct bond_opt_value *newval);
+			       const struct bond_opt_value *newval);
 static int bond_option_lacp_rate_set(struct bonding *bond,
-				     struct bond_opt_value *newval);
+				     const struct bond_opt_value *newval);
 static int bond_option_ad_select_set(struct bonding *bond,
-				     struct bond_opt_value *newval);
+				     const struct bond_opt_value *newval);
 static int bond_option_queue_id_set(struct bonding *bond,
-				    struct bond_opt_value *newval);
+				    const struct bond_opt_value *newval);
 static int bond_option_mode_set(struct bonding *bond,
-				struct bond_opt_value *newval);
+				const struct bond_opt_value *newval);
 static int bond_option_slaves_set(struct bonding *bond,
-				  struct bond_opt_value *newval);
+				  const struct bond_opt_value *newval);
 
 
 static const struct bond_opt_value bond_mode_tbl[] = {
@@ -504,7 +504,7 @@ static int bond_opt_check_deps(struct bonding *bond,
 static void bond_opt_dep_print(struct bonding *bond,
 			       const struct bond_option *opt)
 {
-	struct bond_opt_value *modeval;
+	const struct bond_opt_value *modeval;
 	struct bond_params *params;
 
 	params = &bond->params;
@@ -517,9 +517,9 @@ static void bond_opt_dep_print(struct bonding *bond,
 
 static void bond_opt_error_interpret(struct bonding *bond,
 				     const struct bond_option *opt,
-				     int error, struct bond_opt_value *val)
+				     int error, const struct bond_opt_value *val)
 {
-	struct bond_opt_value *minval, *maxval;
+	const struct bond_opt_value *minval, *maxval;
 	char *p;
 
 	switch (error) {
@@ -574,7 +574,7 @@ static void bond_opt_error_interpret(struct bonding *bond,
 int __bond_opt_set(struct bonding *bond,
 		   unsigned int option, struct bond_opt_value *val)
 {
-	struct bond_opt_value *retval = NULL;
+	const struct bond_opt_value *retval = NULL;
 	const struct bond_option *opt;
 	int ret = -ENOENT;
 
@@ -637,7 +637,7 @@ const struct bond_option *bond_opt_get(unsigned int option)
 	return &bond_opts[option];
 }
 
-int bond_option_mode_set(struct bonding *bond, struct bond_opt_value *newval)
+int bond_option_mode_set(struct bonding *bond, const struct bond_opt_value *newval)
 {
 	if (BOND_NO_USES_ARP(newval->value) && bond->params.arp_interval) {
 		pr_info("%s: %s mode is incompatible with arp monitoring, start mii monitoring\n",
@@ -676,7 +676,7 @@ struct net_device *bond_option_active_slave_get(struct bonding *bond)
 }
 
 static int bond_option_active_slave_set(struct bonding *bond,
-					struct bond_opt_value *newval)
+					const struct bond_opt_value *newval)
 {
 	char ifname[IFNAMSIZ] = { 0, };
 	struct net_device *slave_dev;
@@ -745,7 +745,7 @@ static int bond_option_active_slave_set(struct bonding *bond,
 }
 
 static int bond_option_miimon_set(struct bonding *bond,
-				  struct bond_opt_value *newval)
+				  const struct bond_opt_value *newval)
 {
 	pr_info("%s: Setting MII monitoring interval to %llu\n",
 		bond->dev->name, newval->value);
@@ -783,7 +783,7 @@ static int bond_option_miimon_set(struct bonding *bond,
 }
 
 static int bond_option_updelay_set(struct bonding *bond,
-				   struct bond_opt_value *newval)
+				   const struct bond_opt_value *newval)
 {
 	int value = newval->value;
 
@@ -807,7 +807,7 @@ static int bond_option_updelay_set(struct bonding *bond,
 }
 
 static int bond_option_downdelay_set(struct bonding *bond,
-				     struct bond_opt_value *newval)
+				     const struct bond_opt_value *newval)
 {
 	int value = newval->value;
 
@@ -831,7 +831,7 @@ static int bond_option_downdelay_set(struct bonding *bond,
 }
 
 static int bond_option_use_carrier_set(struct bonding *bond,
-				       struct bond_opt_value *newval)
+				       const struct bond_opt_value *newval)
 {
 	pr_info("%s: Setting use_carrier to %llu\n",
 		bond->dev->name, newval->value);
@@ -841,7 +841,7 @@ static int bond_option_use_carrier_set(struct bonding *bond,
 }
 
 static int bond_option_arp_interval_set(struct bonding *bond,
-					struct bond_opt_value *newval)
+					const struct bond_opt_value *newval)
 {
 	pr_info("%s: Setting ARP monitoring interval to %llu\n",
 		bond->dev->name, newval->value);
@@ -991,7 +991,7 @@ void bond_option_arp_ip_targets_clear(struct bonding *bond)
 }
 
 static int bond_option_arp_ip_targets_set(struct bonding *bond,
-					  struct bond_opt_value *newval)
+					  const struct bond_opt_value *newval)
 {
 	int ret = -EPERM;
 	__be32 target;
@@ -1018,7 +1018,7 @@ static int bond_option_arp_ip_targets_set(struct bonding *bond,
 }
 
 static int bond_option_arp_validate_set(struct bonding *bond,
-					struct bond_opt_value *newval)
+					const struct bond_opt_value *newval)
 {
 	pr_info("%s: Setting arp_validate to %s (%llu)\n",
 		bond->dev->name, newval->string, newval->value);
@@ -1035,7 +1035,7 @@ static int bond_option_arp_validate_set(struct bonding *bond,
 }
 
 static int bond_option_arp_all_targets_set(struct bonding *bond,
-					   struct bond_opt_value *newval)
+					   const struct bond_opt_value *newval)
 {
 	pr_info("%s: Setting arp_all_targets to %s (%llu)\n",
 		bond->dev->name, newval->string, newval->value);
@@ -1045,7 +1045,7 @@ static int bond_option_arp_all_targets_set(struct bonding *bond,
 }
 
 static int bond_option_primary_set(struct bonding *bond,
-				   struct bond_opt_value *newval)
+				   const struct bond_opt_value *newval)
 {
 	char *p, *primary = newval->string;
 	struct list_head *iter;
@@ -1098,7 +1098,7 @@ out:
 }
 
 static int bond_option_primary_reselect_set(struct bonding *bond,
-					    struct bond_opt_value *newval)
+					    const struct bond_opt_value *newval)
 {
 	pr_info("%s: Setting primary_reselect to %s (%llu)\n",
 		bond->dev->name, newval->string, newval->value);
@@ -1114,7 +1114,7 @@ static int bond_option_primary_reselect_set(struct bonding *bond,
 }
 
 static int bond_option_fail_over_mac_set(struct bonding *bond,
-					 struct bond_opt_value *newval)
+					 const struct bond_opt_value *newval)
 {
 	pr_info("%s: Setting fail_over_mac to %s (%llu)\n",
 		bond->dev->name, newval->string, newval->value);
@@ -1124,7 +1124,7 @@ static int bond_option_fail_over_mac_set(struct bonding *bond,
 }
 
 static int bond_option_xmit_hash_policy_set(struct bonding *bond,
-					    struct bond_opt_value *newval)
+					    const struct bond_opt_value *newval)
 {
 	pr_info("%s: Setting xmit hash policy to %s (%llu)\n",
 		bond->dev->name, newval->string, newval->value);
@@ -1134,7 +1134,7 @@ static int bond_option_xmit_hash_policy_set(struct bonding *bond,
 }
 
 static int bond_option_resend_igmp_set(struct bonding *bond,
-				       struct bond_opt_value *newval)
+				       const struct bond_opt_value *newval)
 {
 	pr_info("%s: Setting resend_igmp to %llu\n",
 		bond->dev->name, newval->value);
@@ -1144,7 +1144,7 @@ static int bond_option_resend_igmp_set(struct bonding *bond,
 }
 
 static int bond_option_num_peer_notif_set(struct bonding *bond,
-				   struct bond_opt_value *newval)
+				   const struct bond_opt_value *newval)
 {
 	bond->params.num_peer_notif = newval->value;
 
@@ -1152,7 +1152,7 @@ static int bond_option_num_peer_notif_set(struct bonding *bond,
 }
 
 static int bond_option_all_slaves_active_set(struct bonding *bond,
-					     struct bond_opt_value *newval)
+					     const struct bond_opt_value *newval)
 {
 	struct list_head *iter;
 	struct slave *slave;
@@ -1173,7 +1173,7 @@ static int bond_option_all_slaves_active_set(struct bonding *bond,
 }
 
 static int bond_option_min_links_set(struct bonding *bond,
-				     struct bond_opt_value *newval)
+				     const struct bond_opt_value *newval)
 {
 	pr_info("%s: Setting min links value to %llu\n",
 		bond->dev->name, newval->value);
@@ -1183,7 +1183,7 @@ static int bond_option_min_links_set(struct bonding *bond,
 }
 
 static int bond_option_lp_interval_set(struct bonding *bond,
-				       struct bond_opt_value *newval)
+				       const struct bond_opt_value *newval)
 {
 	bond->params.lp_interval = newval->value;
 
@@ -1191,7 +1191,7 @@ static int bond_option_lp_interval_set(struct bonding *bond,
 }
 
 static int bond_option_pps_set(struct bonding *bond,
-			       struct bond_opt_value *newval)
+			       const struct bond_opt_value *newval)
 {
 	bond->params.packets_per_slave = newval->value;
 	if (newval->value > 0) {
@@ -1209,7 +1209,7 @@ static int bond_option_pps_set(struct bonding *bond,
 }
 
 static int bond_option_lacp_rate_set(struct bonding *bond,
-				     struct bond_opt_value *newval)
+				     const struct bond_opt_value *newval)
 {
 	pr_info("%s: Setting LACP rate to %s (%llu)\n",
 		bond->dev->name, newval->string, newval->value);
@@ -1220,7 +1220,7 @@ static int bond_option_lacp_rate_set(struct bonding *bond,
 }
 
 static int bond_option_ad_select_set(struct bonding *bond,
-				     struct bond_opt_value *newval)
+				     const struct bond_opt_value *newval)
 {
 	pr_info("%s: Setting ad_select to %s (%llu)\n",
 		bond->dev->name, newval->string, newval->value);
@@ -1230,7 +1230,7 @@ static int bond_option_ad_select_set(struct bonding *bond,
 }
 
 static int bond_option_queue_id_set(struct bonding *bond,
-				    struct bond_opt_value *newval)
+				    const struct bond_opt_value *newval)
 {
 	struct slave *slave, *update_slave;
 	struct net_device *sdev;
@@ -1291,7 +1291,7 @@ err_no_cmd:
 }
 
 static int bond_option_slaves_set(struct bonding *bond,
-				  struct bond_opt_value *newval)
+				  const struct bond_opt_value *newval)
 {
 	char command[IFNAMSIZ + 1] = { 0, };
 	struct net_device *dev;
diff --git a/drivers/net/bonding/bond_options.h b/drivers/net/bonding/bond_options.h
index 6c5ba0ffc31c..12be9e1bfb0c 100644
--- a/drivers/net/bonding/bond_options.h
+++ b/drivers/net/bonding/bond_options.h
@@ -94,14 +94,15 @@ struct bond_option {
 	 */
 	const struct bond_opt_value *values;
 
-	int (*set)(struct bonding *bond, struct bond_opt_value *val);
+	int (*set)(struct bonding *bond, const struct bond_opt_value *val);
 };
 
 int __bond_opt_set(struct bonding *bond, unsigned int option,
 		   struct bond_opt_value *val);
 int bond_opt_tryset_rtnl(struct bonding *bond, unsigned int option, char *buf);
+
 const struct bond_opt_value *bond_opt_parse(const struct bond_option *opt,
-				      struct bond_opt_value *val);
+					    struct bond_opt_value *val);
 const struct bond_option *bond_opt_get(unsigned int option);
 const struct bond_opt_value *bond_opt_get_val(unsigned int option, u64 val);
 
diff --git a/drivers/net/bonding/bond_procfs.c b/drivers/net/bonding/bond_procfs.c
index 588cf39d832c..013fdd0f45e9 100644
--- a/drivers/net/bonding/bond_procfs.c
+++ b/drivers/net/bonding/bond_procfs.c
@@ -65,7 +65,7 @@ static void bond_info_seq_stop(struct seq_file *seq, void *v)
 static void bond_info_show_master(struct seq_file *seq)
 {
 	struct bonding *bond = seq->private;
-	struct bond_opt_value *optval;
+	const struct bond_opt_value *optval;
 	struct slave *curr;
 	int i;
 
-- 
cgit v1.2.2


From 3415e8ce0de0242811b1ce9b89cdd8166a505959 Mon Sep 17 00:00:00 2001
From: Greg Rose <gregory.v.rose@intel.com>
Date: Thu, 30 Jan 2014 12:40:27 +0000
Subject: i40evf: Enable the ndo_set_features netdev op

Set netdev->hw_features to enable the ndo_set_features netdev op.

Change-Id: I5a086fbfa5a089de5adba2800c4d0b3a73747b11
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40evf/i40evf_main.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index b2c03bca7929..3d3ab14c0d97 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -2036,6 +2036,7 @@ static void i40evf_init_task(struct work_struct *work)
 			    NETIF_F_IPV6_CSUM |
 			    NETIF_F_TSO |
 			    NETIF_F_TSO6 |
+			    NETIF_F_RXCSUM |
 			    NETIF_F_GRO;
 
 	if (adapter->vf_res->vf_offload_flags
@@ -2046,6 +2047,10 @@ static void i40evf_init_task(struct work_struct *work)
 				    NETIF_F_HW_VLAN_CTAG_FILTER;
 	}
 
+	/* copy netdev features into list of user selectable features */
+	netdev->hw_features |= netdev->features;
+	netdev->hw_features &= ~NETIF_F_RXCSUM;
+
 	if (!is_valid_ether_addr(adapter->hw.mac.addr)) {
 		dev_info(&pdev->dev, "Invalid MAC address %pMAC, using random\n",
 			 adapter->hw.mac.addr);
-- 
cgit v1.2.2


From 17a73f6b14010d4516a05f52e3c87431e86edebb Mon Sep 17 00:00:00 2001
From: Joseph Gasparakis <joseph.gasparakis@intel.com>
Date: Wed, 12 Feb 2014 01:45:30 +0000
Subject: i40e: Flow Director sideband accounting

This patch completes implementation of the ethtool ntuple
rule management interface.  It adds the get, update and delete
interface reset.

Change-ID: Ida7f481d9ee4e405ed91340b858eabb18a52fdb5
Signed-off-by: Joseph Gasparakis <joseph.gasparakis@intel.com>
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e.h         |  23 +-
 drivers/net/ethernet/intel/i40e/i40e_debugfs.c |  27 +-
 drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 428 +++++++++++--------------
 drivers/net/ethernet/intel/i40e/i40e_main.c    |  44 ++-
 drivers/net/ethernet/intel/i40e/i40e_txrx.c    | 277 +++++++++++++++-
 5 files changed, 535 insertions(+), 264 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
index 72dae4d97b43..ba77fca628af 100644
--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -152,8 +152,18 @@ struct i40e_lump_tracking {
 };
 
 #define I40E_DEFAULT_ATR_SAMPLE_RATE	20
-#define I40E_FDIR_MAX_RAW_PACKET_LOOKUP 512
-struct i40e_fdir_data {
+#define I40E_FDIR_MAX_RAW_PACKET_SIZE   512
+struct i40e_fdir_filter {
+	struct hlist_node fdir_node;
+	/* filter ipnut set */
+	u8 flow_type;
+	u8 ip4_proto;
+	__be32 dst_ip[4];
+	__be32 src_ip[4];
+	__be16 src_port;
+	__be16 dst_port;
+	__be32 sctp_v_tag;
+	/* filter control */
 	u16 q_index;
 	u8  flex_off;
 	u8  pctype;
@@ -162,7 +172,6 @@ struct i40e_fdir_data {
 	u8  fd_status;
 	u16 cnt_index;
 	u32 fd_id;
-	u8  *raw_packet;
 };
 
 #define I40E_ETH_P_LLDP			0x88cc
@@ -210,6 +219,9 @@ struct i40e_pf {
 	u8 atr_sample_rate;
 	bool wol_en;
 
+	struct hlist_head fdir_filter_list;
+	u16 fdir_pf_active_filters;
+
 #ifdef CONFIG_I40E_VXLAN
 	__be16  vxlan_ports[I40E_MAX_PF_UDP_OFFLOAD_PORTS];
 	u16 pending_vxlan_bitmap;
@@ -534,9 +546,10 @@ struct rtnl_link_stats64 *i40e_get_vsi_stats_struct(struct i40e_vsi *vsi);
 int i40e_fetch_switch_configuration(struct i40e_pf *pf,
 				    bool printconfig);
 
-int i40e_program_fdir_filter(struct i40e_fdir_data *fdir_data,
+int i40e_program_fdir_filter(struct i40e_fdir_filter *fdir_data, u8 *raw_packet,
 			     struct i40e_pf *pf, bool add);
-
+int i40e_add_del_fdir(struct i40e_vsi *vsi,
+		      struct i40e_fdir_filter *input, bool add);
 void i40e_set_ethtool_ops(struct net_device *netdev);
 struct i40e_mac_filter *i40e_add_filter(struct i40e_vsi *vsi,
 					u8 *macaddr, s16 vlan,
diff --git a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
index da22c3fa2c00..57fc86496f30 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
@@ -1663,21 +1663,22 @@ static ssize_t i40e_dbg_command_write(struct file *filp,
 		desc = NULL;
 	} else if ((strncmp(cmd_buf, "add fd_filter", 13) == 0) ||
 		   (strncmp(cmd_buf, "rem fd_filter", 13) == 0)) {
-		struct i40e_fdir_data fd_data;
+		struct i40e_fdir_filter fd_data;
 		u16 packet_len, i, j = 0;
 		char *asc_packet;
+		u8 *raw_packet;
 		bool add = false;
 		int ret;
 
-		asc_packet = kzalloc(I40E_FDIR_MAX_RAW_PACKET_LOOKUP,
+		asc_packet = kzalloc(I40E_FDIR_MAX_RAW_PACKET_SIZE,
 				     GFP_KERNEL);
 		if (!asc_packet)
 			goto command_write_done;
 
-		fd_data.raw_packet = kzalloc(I40E_FDIR_MAX_RAW_PACKET_LOOKUP,
-					     GFP_KERNEL);
+		raw_packet = kzalloc(I40E_FDIR_MAX_RAW_PACKET_SIZE,
+				     GFP_KERNEL);
 
-		if (!fd_data.raw_packet) {
+		if (!raw_packet) {
 			kfree(asc_packet);
 			asc_packet = NULL;
 			goto command_write_done;
@@ -1698,36 +1699,36 @@ static ssize_t i40e_dbg_command_write(struct file *filp,
 				 cnt);
 			kfree(asc_packet);
 			asc_packet = NULL;
-			kfree(fd_data.raw_packet);
+			kfree(raw_packet);
 			goto command_write_done;
 		}
 
 		/* fix packet length if user entered 0 */
 		if (packet_len == 0)
-			packet_len = I40E_FDIR_MAX_RAW_PACKET_LOOKUP;
+			packet_len = I40E_FDIR_MAX_RAW_PACKET_SIZE;
 
 		/* make sure to check the max as well */
 		packet_len = min_t(u16,
-				   packet_len, I40E_FDIR_MAX_RAW_PACKET_LOOKUP);
+				   packet_len, I40E_FDIR_MAX_RAW_PACKET_SIZE);
 
 		for (i = 0; i < packet_len; i++) {
 			sscanf(&asc_packet[j], "%2hhx ",
-			       &fd_data.raw_packet[i]);
+			       &raw_packet[i]);
 			j += 3;
 		}
 		dev_info(&pf->pdev->dev, "FD raw packet dump\n");
 		print_hex_dump(KERN_INFO, "FD raw packet: ",
 			       DUMP_PREFIX_OFFSET, 16, 1,
-			       fd_data.raw_packet, packet_len, true);
-		ret = i40e_program_fdir_filter(&fd_data, pf, add);
+			       raw_packet, packet_len, true);
+		ret = i40e_program_fdir_filter(&fd_data, raw_packet, pf, add);
 		if (!ret) {
 			dev_info(&pf->pdev->dev, "Filter command send Status : Success\n");
 		} else {
 			dev_info(&pf->pdev->dev,
 				 "Filter command send failed %d\n", ret);
 		}
-		kfree(fd_data.raw_packet);
-		fd_data.raw_packet = NULL;
+		kfree(raw_packet);
+		raw_packet = NULL;
 		kfree(asc_packet);
 		asc_packet = NULL;
 	} else if (strncmp(cmd_buf, "fd-atr off", 10) == 0) {
diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index b1d7d8c5cb9b..8d46c6ee4cdd 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -62,6 +62,9 @@ static const struct i40e_stats i40e_gstrings_net_stats[] = {
 	I40E_NETDEV_STAT(rx_crc_errors),
 };
 
+static int i40e_add_del_fdir_ethtool(struct i40e_vsi *vsi,
+				     struct ethtool_rxnfc *cmd, bool add);
+
 /* These PF_STATs might look like duplicates of some NETDEV_STATs,
  * but they are separate.  This device supports Virtualization, and
  * as such might have several netdevs supporting VMDq and FCoE going
@@ -1111,6 +1114,84 @@ static int i40e_get_rss_hash_opts(struct i40e_pf *pf, struct ethtool_rxnfc *cmd)
 	return 0;
 }
 
+/**
+ * i40e_get_ethtool_fdir_all - Populates the rule count of a command
+ * @pf: Pointer to the physical function struct
+ * @cmd: The command to get or set Rx flow classification rules
+ * @rule_locs: Array of used rule locations
+ *
+ * This function populates both the total and actual rule count of
+ * the ethtool flow classification command
+ *
+ * Returns 0 on success or -EMSGSIZE if entry not found
+ **/
+static int i40e_get_ethtool_fdir_all(struct i40e_pf *pf,
+				     struct ethtool_rxnfc *cmd,
+				     u32 *rule_locs)
+{
+	struct i40e_fdir_filter *rule;
+	struct hlist_node *node2;
+	int cnt = 0;
+
+	/* report total rule count */
+	cmd->data = pf->hw.fdir_shared_filter_count +
+		    pf->fdir_pf_filter_count;
+
+	hlist_for_each_entry_safe(rule, node2,
+				  &pf->fdir_filter_list, fdir_node) {
+		if (cnt == cmd->rule_cnt)
+			return -EMSGSIZE;
+
+		rule_locs[cnt] = rule->fd_id;
+		cnt++;
+	}
+
+	cmd->rule_cnt = cnt;
+
+	return 0;
+}
+
+/**
+ * i40e_get_ethtool_fdir_entry - Look up a filter based on Rx flow
+ * @pf: Pointer to the physical function struct
+ * @cmd: The command to get or set Rx flow classification rules
+ *
+ * This function looks up a filter based on the Rx flow classification
+ * command and fills the flow spec info for it if found
+ *
+ * Returns 0 on success or -EINVAL if filter not found
+ **/
+static int i40e_get_ethtool_fdir_entry(struct i40e_pf *pf,
+				       struct ethtool_rxnfc *cmd)
+{
+	struct ethtool_rx_flow_spec *fsp =
+			(struct ethtool_rx_flow_spec *)&cmd->fs;
+	struct i40e_fdir_filter *rule = NULL;
+	struct hlist_node *node2;
+
+	/* report total rule count */
+	cmd->data = pf->hw.fdir_shared_filter_count +
+		    pf->fdir_pf_filter_count;
+
+	hlist_for_each_entry_safe(rule, node2,
+				  &pf->fdir_filter_list, fdir_node) {
+		if (fsp->location <= rule->fd_id)
+			break;
+	}
+
+	if (!rule || fsp->location != rule->fd_id)
+		return -EINVAL;
+
+	fsp->flow_type = rule->flow_type;
+	fsp->h_u.tcp_ip4_spec.psrc = rule->src_port;
+	fsp->h_u.tcp_ip4_spec.pdst = rule->dst_port;
+	fsp->h_u.tcp_ip4_spec.ip4src = rule->src_ip[0];
+	fsp->h_u.tcp_ip4_spec.ip4dst = rule->dst_ip[0];
+	fsp->ring_cookie = rule->q_index;
+
+	return 0;
+}
+
 /**
  * i40e_get_rxnfc - command to get RX flow classification rules
  * @netdev: network interface device structure
@@ -1135,15 +1216,15 @@ static int i40e_get_rxnfc(struct net_device *netdev, struct ethtool_rxnfc *cmd,
 		ret = i40e_get_rss_hash_opts(pf, cmd);
 		break;
 	case ETHTOOL_GRXCLSRLCNT:
-		cmd->rule_cnt = 10;
+		cmd->rule_cnt = pf->fdir_pf_active_filters;
 		ret = 0;
 		break;
 	case ETHTOOL_GRXCLSRULE:
-		ret = 0;
+		ret = i40e_get_ethtool_fdir_entry(pf, cmd);
 		break;
 	case ETHTOOL_GRXCLSRLALL:
-		cmd->data = 500;
-		ret = 0;
+		ret = i40e_get_ethtool_fdir_all(pf, cmd, rule_locs);
+		break;
 	default:
 		break;
 	}
@@ -1274,289 +1355,158 @@ static int i40e_set_rss_hash_opt(struct i40e_pf *pf, struct ethtool_rxnfc *nfc)
 	return 0;
 }
 
-#define IP_HEADER_OFFSET 14
-#define I40E_UDPIP_DUMMY_PACKET_LEN 42
 /**
- * i40e_add_del_fdir_udpv4 - Add/Remove UDPv4 Flow Director filters for
- * a specific flow spec
- * @vsi: pointer to the targeted VSI
- * @fd_data: the flow director data required from the FDir descriptor
- * @ethtool_rx_flow_spec: the flow spec
- * @add: true adds a filter, false removes it
+ * i40e_update_ethtool_fdir_entry - Updates the fdir filter entry
+ * @vsi: Pointer to the targeted VSI
+ * @input: The filter to update or NULL to indicate deletion
+ * @sw_idx: Software index to the filter
+ * @cmd: The command to get or set Rx flow classification rules
  *
- * Returns 0 if the filters were successfully added or removed
+ * This function updates (or deletes) a Flow Director entry from
+ * the hlist of the corresponding PF
+ *
+ * Returns 0 on success
  **/
-static int i40e_add_del_fdir_udpv4(struct i40e_vsi *vsi,
-				   struct i40e_fdir_data *fd_data,
-				   struct ethtool_rx_flow_spec *fsp, bool add)
+static int i40e_update_ethtool_fdir_entry(struct i40e_vsi *vsi,
+					  struct i40e_fdir_filter *input,
+					  u16 sw_idx,
+					  struct ethtool_rxnfc *cmd)
 {
+	struct i40e_fdir_filter *rule, *parent;
 	struct i40e_pf *pf = vsi->back;
-	struct udphdr *udp;
-	struct iphdr *ip;
-	bool err = false;
-	int ret;
-	int i;
-	char packet[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x08, 0,
-			 0x45, 0, 0, 0x1c, 0, 0, 0x40, 0, 0x40, 0x11,
-			 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-			 0, 0, 0, 0, 0, 0, 0, 0};
-
-	memcpy(fd_data->raw_packet, packet, I40E_UDPIP_DUMMY_PACKET_LEN);
-
-	ip = (struct iphdr *)(fd_data->raw_packet + IP_HEADER_OFFSET);
-	udp = (struct udphdr *)(fd_data->raw_packet + IP_HEADER_OFFSET
-	      + sizeof(struct iphdr));
+	struct hlist_node *node2;
+	int err = -EINVAL;
 
-	ip->saddr = fsp->h_u.tcp_ip4_spec.ip4src;
-	ip->daddr = fsp->h_u.tcp_ip4_spec.ip4dst;
-	udp->source = fsp->h_u.tcp_ip4_spec.psrc;
-	udp->dest = fsp->h_u.tcp_ip4_spec.pdst;
+	parent = NULL;
+	rule = NULL;
 
-	for (i = I40E_FILTER_PCTYPE_NONF_UNICAST_IPV4_UDP;
-	     i <= I40E_FILTER_PCTYPE_NONF_IPV4_UDP; i++) {
-		fd_data->pctype = i;
-		ret = i40e_program_fdir_filter(fd_data, pf, add);
-
-		if (ret) {
-			dev_info(&pf->pdev->dev,
-				 "Filter command send failed for PCTYPE %d (ret = %d)\n",
-				 fd_data->pctype, ret);
-			err = true;
-		} else {
-			dev_info(&pf->pdev->dev,
-				 "Filter OK for PCTYPE %d (ret = %d)\n",
-				 fd_data->pctype, ret);
-		}
+	hlist_for_each_entry_safe(rule, node2,
+				  &pf->fdir_filter_list, fdir_node) {
+		/* hash found, or no matching entry */
+		if (rule->fd_id >= sw_idx)
+			break;
+		parent = rule;
 	}
 
-	return err ? -EOPNOTSUPP : 0;
-}
-
-#define I40E_TCPIP_DUMMY_PACKET_LEN 54
-/**
- * i40e_add_del_fdir_tcpv4 - Add/Remove TCPv4 Flow Director filters for
- * a specific flow spec
- * @vsi: pointer to the targeted VSI
- * @fd_data: the flow director data required from the FDir descriptor
- * @ethtool_rx_flow_spec: the flow spec
- * @add: true adds a filter, false removes it
- *
- * Returns 0 if the filters were successfully added or removed
- **/
-static int i40e_add_del_fdir_tcpv4(struct i40e_vsi *vsi,
-				   struct i40e_fdir_data *fd_data,
-				   struct ethtool_rx_flow_spec *fsp, bool add)
-{
-	struct i40e_pf *pf = vsi->back;
-	struct tcphdr *tcp;
-	struct iphdr *ip;
-	bool err = false;
-	int ret;
-	/* Dummy packet */
-	char packet[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x08, 0,
-			 0x45, 0, 0, 0x28, 0, 0, 0x40, 0, 0x40, 0x6,
-			 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-			 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-			 0x80, 0x11, 0x0, 0x72, 0, 0, 0, 0};
-
-	memcpy(fd_data->raw_packet, packet, I40E_TCPIP_DUMMY_PACKET_LEN);
-
-	ip = (struct iphdr *)(fd_data->raw_packet + IP_HEADER_OFFSET);
-	tcp = (struct tcphdr *)(fd_data->raw_packet + IP_HEADER_OFFSET
-	      + sizeof(struct iphdr));
-
-	ip->daddr = fsp->h_u.tcp_ip4_spec.ip4dst;
-	tcp->dest = fsp->h_u.tcp_ip4_spec.pdst;
-	ip->saddr = fsp->h_u.tcp_ip4_spec.ip4src;
-	tcp->source = fsp->h_u.tcp_ip4_spec.psrc;
-
-	if (add) {
-		if (pf->flags & I40E_FLAG_FD_ATR_ENABLED) {
-			dev_info(&pf->pdev->dev, "Forcing ATR off, sideband rules for TCP/IPv4 flow being applied\n");
-			pf->flags &= ~I40E_FLAG_FD_ATR_ENABLED;
+	/* if there is an old rule occupying our place remove it */
+	if (rule && (rule->fd_id == sw_idx)) {
+		if (!input || (rule->fd_id != input->fd_id)) {
+			cmd->fs.flow_type = rule->flow_type;
+			err = i40e_add_del_fdir_ethtool(vsi, cmd, false);
 		}
+
+		hlist_del(&rule->fdir_node);
+		kfree(rule);
+		pf->fdir_pf_active_filters--;
 	}
 
-	fd_data->pctype = I40E_FILTER_PCTYPE_NONF_IPV4_TCP_SYN;
-	ret = i40e_program_fdir_filter(fd_data, pf, add);
+	/* If no input this was a delete, err should be 0 if a rule was
+	 * successfully found and removed from the list else -EINVAL
+	 */
+	if (!input)
+		return err;
 
-	if (ret) {
-		dev_info(&pf->pdev->dev,
-			 "Filter command send failed for PCTYPE %d (ret = %d)\n",
-			 fd_data->pctype, ret);
-		err = true;
-	} else {
-		dev_info(&pf->pdev->dev, "Filter OK for PCTYPE %d (ret = %d)\n",
-			 fd_data->pctype, ret);
-	}
+	/* initialize node and set software index */
+	INIT_HLIST_NODE(&input->fdir_node);
 
-	fd_data->pctype = I40E_FILTER_PCTYPE_NONF_IPV4_TCP;
+	/* add filter to the list */
+	if (parent)
+		hlist_add_after(&parent->fdir_node, &input->fdir_node);
+	else
+		hlist_add_head(&input->fdir_node,
+			       &pf->fdir_filter_list);
 
-	ret = i40e_program_fdir_filter(fd_data, pf, add);
-	if (ret) {
-		dev_info(&pf->pdev->dev,
-			 "Filter command send failed for PCTYPE %d (ret = %d)\n",
-			 fd_data->pctype, ret);
-		err = true;
-	} else {
-		dev_info(&pf->pdev->dev, "Filter OK for PCTYPE %d (ret = %d)\n",
-			  fd_data->pctype, ret);
-	}
+	/* update counts */
+	pf->fdir_pf_active_filters++;
 
-	return err ? -EOPNOTSUPP : 0;
+	return 0;
 }
 
 /**
- * i40e_add_del_fdir_sctpv4 - Add/Remove SCTPv4 Flow Director filters for
- * a specific flow spec
- * @vsi: pointer to the targeted VSI
- * @fd_data: the flow director data required from the FDir descriptor
- * @ethtool_rx_flow_spec: the flow spec
- * @add: true adds a filter, false removes it
+ * i40e_del_fdir_entry - Deletes a Flow Director filter entry
+ * @vsi: Pointer to the targeted VSI
+ * @cmd: The command to get or set Rx flow classification rules
  *
- * Returns 0 if the filters were successfully added or removed
- **/
-static int i40e_add_del_fdir_sctpv4(struct i40e_vsi *vsi,
-				    struct i40e_fdir_data *fd_data,
-				    struct ethtool_rx_flow_spec *fsp, bool add)
-{
-	return -EOPNOTSUPP;
-}
-
-#define I40E_IP_DUMMY_PACKET_LEN 34
-/**
- * i40e_add_del_fdir_ipv4 - Add/Remove IPv4 Flow Director filters for
- * a specific flow spec
- * @vsi: pointer to the targeted VSI
- * @fd_data: the flow director data required for the FDir descriptor
- * @fsp: the ethtool flow spec
- * @add: true adds a filter, false removes it
+ * The function removes a Flow Director filter entry from the
+ * hlist of the corresponding PF
  *
- * Returns 0 if the filters were successfully added or removed
- **/
-static int i40e_add_del_fdir_ipv4(struct i40e_vsi *vsi,
-				  struct i40e_fdir_data *fd_data,
-				  struct ethtool_rx_flow_spec *fsp, bool add)
+ * Returns 0 on success
+ */
+static int i40e_del_fdir_entry(struct i40e_vsi *vsi,
+			       struct ethtool_rxnfc *cmd)
 {
+	struct ethtool_rx_flow_spec *fsp =
+		(struct ethtool_rx_flow_spec *)&cmd->fs;
 	struct i40e_pf *pf = vsi->back;
-	struct iphdr *ip;
-	bool err = false;
-	int ret;
-	int i;
-	char packet[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x08, 0,
-			 0x45, 0, 0, 0x14, 0, 0, 0x40, 0, 0x40, 0x10,
-			 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
+	int ret = 0;
 
-	memcpy(fd_data->raw_packet, packet, I40E_IP_DUMMY_PACKET_LEN);
-	ip = (struct iphdr *)(fd_data->raw_packet + IP_HEADER_OFFSET);
-
-	ip->saddr = fsp->h_u.usr_ip4_spec.ip4src;
-	ip->daddr = fsp->h_u.usr_ip4_spec.ip4dst;
-	ip->protocol = fsp->h_u.usr_ip4_spec.proto;
-
-	for (i = I40E_FILTER_PCTYPE_NONF_IPV4_OTHER;
-	     i <= I40E_FILTER_PCTYPE_FRAG_IPV4;	i++) {
-		fd_data->pctype = i;
-		ret = i40e_program_fdir_filter(fd_data, pf, add);
-
-		if (ret) {
-			dev_info(&pf->pdev->dev,
-				 "Filter command send failed for PCTYPE %d (ret = %d)\n",
-				 fd_data->pctype, ret);
-			err = true;
-		} else {
-			dev_info(&pf->pdev->dev,
-				 "Filter OK for PCTYPE %d (ret = %d)\n",
-				 fd_data->pctype, ret);
-		}
-	}
+	ret = i40e_update_ethtool_fdir_entry(vsi, NULL, fsp->location, cmd);
 
-	return err ? -EOPNOTSUPP : 0;
+	return ret;
 }
 
 /**
- * i40e_add_del_fdir_ethtool - Add/Remove Flow Director filters for
- * a specific flow spec based on their protocol
+ * i40e_add_del_fdir_ethtool - Add/Remove Flow Director filters
  * @vsi: pointer to the targeted VSI
  * @cmd: command to get or set RX flow classification rules
  * @add: true adds a filter, false removes it
  *
- * Returns 0 if the filters were successfully added or removed
+ * Add/Remove Flow Director filters for a specific flow spec based on their
+ * protocol.  Returns 0 if the filters were successfully added or removed.
  **/
 static int i40e_add_del_fdir_ethtool(struct i40e_vsi *vsi,
-			struct ethtool_rxnfc *cmd, bool add)
+				     struct ethtool_rxnfc *cmd, bool add)
 {
-	struct i40e_fdir_data fd_data;
-	int ret = -EINVAL;
+	struct ethtool_rx_flow_spec *fsp;
+	struct i40e_fdir_filter *input;
 	struct i40e_pf *pf;
-	struct ethtool_rx_flow_spec *fsp =
-		(struct ethtool_rx_flow_spec *)&cmd->fs;
+	int ret = -EINVAL;
 
 	if (!vsi)
 		return -EINVAL;
 
+	fsp = (struct ethtool_rx_flow_spec *)&cmd->fs;
 	pf = vsi->back;
 
-	if ((fsp->ring_cookie != RX_CLS_FLOW_DISC) &&
-	    (fsp->ring_cookie >= vsi->num_queue_pairs))
+	if (fsp->location >= (pf->hw.func_caps.fd_filters_best_effort +
+			      pf->hw.func_caps.fd_filters_guaranteed)) {
 		return -EINVAL;
+	}
 
-	/* Populate the Flow Director that we have at the moment
-	 * and allocate the raw packet buffer for the calling functions
-	 */
-	fd_data.raw_packet = kzalloc(I40E_FDIR_MAX_RAW_PACKET_LOOKUP,
-				     GFP_KERNEL);
+	if ((fsp->ring_cookie >= vsi->num_queue_pairs) && add)
+		return -EINVAL;
 
-	if (!fd_data.raw_packet) {
-		dev_info(&pf->pdev->dev, "Could not allocate memory\n");
-		return -ENOMEM;
-	}
+	input = kzalloc(sizeof(*input), GFP_KERNEL);
 
-	fd_data.q_index = fsp->ring_cookie;
-	fd_data.flex_off = 0;
-	fd_data.pctype = 0;
-	fd_data.dest_vsi = vsi->id;
-	fd_data.dest_ctl = I40E_FILTER_PROGRAM_DESC_DEST_DIRECT_PACKET_QINDEX;
-	fd_data.fd_status = I40E_FILTER_PROGRAM_DESC_FD_STATUS_FD_ID;
-	fd_data.cnt_index = 0;
-	fd_data.fd_id = 0;
+	if (!input)
+		return -ENOMEM;
 
-	switch (fsp->flow_type & ~FLOW_EXT) {
-	case TCP_V4_FLOW:
-		ret = i40e_add_del_fdir_tcpv4(vsi, &fd_data, fsp, add);
-		break;
-	case UDP_V4_FLOW:
-		ret = i40e_add_del_fdir_udpv4(vsi, &fd_data, fsp, add);
-		break;
-	case SCTP_V4_FLOW:
-		ret = i40e_add_del_fdir_sctpv4(vsi, &fd_data, fsp, add);
-		break;
-	case IPV4_FLOW:
-		ret = i40e_add_del_fdir_ipv4(vsi, &fd_data, fsp, add);
-		break;
-	case IP_USER_FLOW:
-		switch (fsp->h_u.usr_ip4_spec.proto) {
-		case IPPROTO_TCP:
-			ret = i40e_add_del_fdir_tcpv4(vsi, &fd_data, fsp, add);
-			break;
-		case IPPROTO_UDP:
-			ret = i40e_add_del_fdir_udpv4(vsi, &fd_data, fsp, add);
-			break;
-		case IPPROTO_SCTP:
-			ret = i40e_add_del_fdir_sctpv4(vsi, &fd_data, fsp, add);
-			break;
-		default:
-			ret = i40e_add_del_fdir_ipv4(vsi, &fd_data, fsp, add);
-			break;
-		}
-		break;
-	default:
-		dev_info(&pf->pdev->dev, "Could not specify spec type\n");
-		ret = -EINVAL;
+	input->fd_id = fsp->location;
+
+	input->q_index = fsp->ring_cookie;
+	input->flex_off = 0;
+	input->pctype = 0;
+	input->dest_vsi = vsi->id;
+	input->dest_ctl = I40E_FILTER_PROGRAM_DESC_DEST_DIRECT_PACKET_QINDEX;
+	input->fd_status = I40E_FILTER_PROGRAM_DESC_FD_STATUS_FD_ID;
+	input->cnt_index = 0;
+	input->flow_type = fsp->flow_type;
+	input->ip4_proto = fsp->h_u.usr_ip4_spec.proto;
+	input->src_port = fsp->h_u.tcp_ip4_spec.psrc;
+	input->dst_port = fsp->h_u.tcp_ip4_spec.pdst;
+	input->src_ip[0] = fsp->h_u.tcp_ip4_spec.ip4src;
+	input->dst_ip[0] = fsp->h_u.tcp_ip4_spec.ip4dst;
+
+	ret = i40e_add_del_fdir(vsi, input, add);
+	if (ret) {
+		kfree(input);
+		return ret;
 	}
 
-	kfree(fd_data.raw_packet);
-	fd_data.raw_packet = NULL;
+	if (!ret && add)
+		i40e_update_ethtool_fdir_entry(vsi, input, fsp->location, NULL);
+	else
+		kfree(input);
 
 	return ret;
 }
@@ -1583,7 +1533,7 @@ static int i40e_set_rxnfc(struct net_device *netdev, struct ethtool_rxnfc *cmd)
 		ret = i40e_add_del_fdir_ethtool(vsi, cmd, true);
 		break;
 	case ETHTOOL_SRXCLSRLDEL:
-		ret = i40e_add_del_fdir_ethtool(vsi, cmd, false);
+		ret = i40e_del_fdir_entry(vsi, cmd);
 		break;
 	default:
 		break;
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 53f3ed2df796..fa296b8098f9 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -2420,6 +2420,25 @@ static void i40e_set_vsi_rx_mode(struct i40e_vsi *vsi)
 		i40e_set_rx_mode(vsi->netdev);
 }
 
+/**
+ * i40e_fdir_filter_restore - Restore the Sideband Flow Director filters
+ * @vsi: Pointer to the targeted VSI
+ *
+ * This function replays the hlist on the hw where all the SB Flow Director
+ * filters were saved.
+ **/
+static void i40e_fdir_filter_restore(struct i40e_vsi *vsi)
+{
+	struct i40e_fdir_filter *filter;
+	struct i40e_pf *pf = vsi->back;
+	struct hlist_node *node;
+
+	hlist_for_each_entry_safe(filter, node,
+				  &pf->fdir_filter_list, fdir_node) {
+		i40e_add_del_fdir(vsi, filter, true);
+	}
+}
+
 /**
  * i40e_vsi_configure - Set up the VSI for action
  * @vsi: the VSI being configured
@@ -2431,6 +2450,8 @@ static int i40e_vsi_configure(struct i40e_vsi *vsi)
 	i40e_set_vsi_rx_mode(vsi);
 	i40e_restore_vlan(vsi);
 	i40e_vsi_config_dcb_rings(vsi);
+	if (vsi->type == I40E_VSI_FDIR)
+		i40e_fdir_filter_restore(vsi);
 	err = i40e_vsi_configure_tx(vsi);
 	if (!err)
 		err = i40e_vsi_configure_rx(vsi);
@@ -4267,6 +4288,26 @@ err_setup_tx:
 	return err;
 }
 
+/**
+ * i40e_fdir_filter_exit - Cleans up the Flow Director accounting
+ * @pf: Pointer to pf
+ *
+ * This function destroys the hlist where all the Flow Director
+ * filters were saved.
+ **/
+static void i40e_fdir_filter_exit(struct i40e_pf *pf)
+{
+	struct i40e_fdir_filter *filter;
+	struct hlist_node *node2;
+
+	hlist_for_each_entry_safe(filter, node2,
+				  &pf->fdir_filter_list, fdir_node) {
+		hlist_del(&filter->fdir_node);
+		kfree(filter);
+	}
+	pf->fdir_pf_active_filters = 0;
+}
+
 /**
  * i40e_close - Disables a network interface
  * @netdev: network interface device structure
@@ -5131,9 +5172,9 @@ static void i40e_fdir_sb_setup(struct i40e_pf *pf)
 		err = i40e_up_complete(vsi);
 		if (err)
 			goto err_up_complete;
+		clear_bit(__I40E_NEEDS_RESTART, &vsi->state);
 	}
 
-	clear_bit(__I40E_NEEDS_RESTART, &vsi->state);
 	return;
 
 err_up_complete:
@@ -5156,6 +5197,7 @@ static void i40e_fdir_teardown(struct i40e_pf *pf)
 {
 	int i;
 
+	i40e_fdir_filter_exit(pf);
 	for (i = 0; i < pf->hw.func_caps.num_vsis; i++) {
 		if (pf->vsi[i] && pf->vsi[i]->type == I40E_VSI_FDIR) {
 			i40e_vsi_release(pf->vsi[i]);
diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index 19af4ce0a4fe..7a9fa4ec1a32 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -39,11 +39,12 @@ static inline __le64 build_ctob(u32 td_cmd, u32 td_offset, unsigned int size,
 #define I40E_TXD_CMD (I40E_TX_DESC_CMD_EOP | I40E_TX_DESC_CMD_RS)
 /**
  * i40e_program_fdir_filter - Program a Flow Director filter
- * @fdir_input: Packet data that will be filter parameters
+ * @fdir_data: Packet data that will be filter parameters
+ * @raw_packet: the pre-allocated packet buffer for FDir
  * @pf: The pf pointer
  * @add: True for add/update, False for remove
  **/
-int i40e_program_fdir_filter(struct i40e_fdir_data *fdir_data,
+int i40e_program_fdir_filter(struct i40e_fdir_filter *fdir_data, u8 *raw_packet,
 			     struct i40e_pf *pf, bool add)
 {
 	struct i40e_filter_program_desc *fdir_desc;
@@ -68,8 +69,8 @@ int i40e_program_fdir_filter(struct i40e_fdir_data *fdir_data,
 	tx_ring = vsi->tx_rings[0];
 	dev = tx_ring->dev;
 
-	dma = dma_map_single(dev, fdir_data->raw_packet,
-			     I40E_FDIR_MAX_RAW_PACKET_LOOKUP, DMA_TO_DEVICE);
+	dma = dma_map_single(dev, raw_packet,
+			     I40E_FDIR_MAX_RAW_PACKET_SIZE, DMA_TO_DEVICE);
 	if (dma_mapping_error(dev, dma))
 		goto dma_fail;
 
@@ -132,14 +133,14 @@ int i40e_program_fdir_filter(struct i40e_fdir_data *fdir_data,
 	tx_ring->next_to_use = (i + 1 < tx_ring->count) ? i + 1 : 0;
 
 	/* record length, and DMA address */
-	dma_unmap_len_set(tx_buf, len, I40E_FDIR_MAX_RAW_PACKET_LOOKUP);
+	dma_unmap_len_set(tx_buf, len, I40E_FDIR_MAX_RAW_PACKET_SIZE);
 	dma_unmap_addr_set(tx_buf, dma, dma);
 
 	tx_desc->buffer_addr = cpu_to_le64(dma);
 	td_cmd = I40E_TXD_CMD | I40E_TX_DESC_CMD_DUMMY;
 
 	tx_desc->cmd_type_offset_bsz =
-		build_ctob(td_cmd, 0, I40E_FDIR_MAX_RAW_PACKET_LOOKUP, 0);
+		build_ctob(td_cmd, 0, I40E_FDIR_MAX_RAW_PACKET_SIZE, 0);
 
 	/* set the timestamp */
 	tx_buf->time_stamp = jiffies;
@@ -161,6 +162,270 @@ dma_fail:
 	return -1;
 }
 
+#define IP_HEADER_OFFSET 14
+#define I40E_UDPIP_DUMMY_PACKET_LEN 42
+/**
+ * i40e_add_del_fdir_udpv4 - Add/Remove UDPv4 filters
+ * @vsi: pointer to the targeted VSI
+ * @fd_data: the flow director data required for the FDir descriptor
+ * @raw_packet: the pre-allocated packet buffer for FDir
+ * @add: true adds a filter, false removes it
+ *
+ * Returns 0 if the filters were successfully added or removed
+ **/
+static int i40e_add_del_fdir_udpv4(struct i40e_vsi *vsi,
+				   struct i40e_fdir_filter *fd_data,
+				   u8 *raw_packet, bool add)
+{
+	struct i40e_pf *pf = vsi->back;
+	struct udphdr *udp;
+	struct iphdr *ip;
+	bool err = false;
+	int ret;
+	int i;
+	static char packet[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x08, 0,
+		0x45, 0, 0, 0x1c, 0, 0, 0x40, 0, 0x40, 0x11, 0, 0, 0, 0, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
+
+	memcpy(raw_packet, packet, I40E_UDPIP_DUMMY_PACKET_LEN);
+
+	ip = (struct iphdr *)(raw_packet + IP_HEADER_OFFSET);
+	udp = (struct udphdr *)(raw_packet + IP_HEADER_OFFSET
+	      + sizeof(struct iphdr));
+
+	ip->daddr = fd_data->dst_ip[0];
+	udp->dest = fd_data->dst_port;
+	ip->saddr = fd_data->src_ip[0];
+	udp->source = fd_data->src_port;
+
+	for (i = I40E_FILTER_PCTYPE_NONF_UNICAST_IPV4_UDP;
+	     i <= I40E_FILTER_PCTYPE_NONF_IPV4_UDP; i++) {
+		fd_data->pctype = i;
+		ret = i40e_program_fdir_filter(fd_data, raw_packet, pf, add);
+
+		if (ret) {
+			dev_info(&pf->pdev->dev,
+				 "Filter command send failed for PCTYPE %d (ret = %d)\n",
+				 fd_data->pctype, ret);
+			err = true;
+		} else {
+			dev_info(&pf->pdev->dev,
+				 "Filter OK for PCTYPE %d (ret = %d)\n",
+				 fd_data->pctype, ret);
+		}
+	}
+
+	return err ? -EOPNOTSUPP : 0;
+}
+
+#define I40E_TCPIP_DUMMY_PACKET_LEN 54
+/**
+ * i40e_add_del_fdir_tcpv4 - Add/Remove TCPv4 filters
+ * @vsi: pointer to the targeted VSI
+ * @fd_data: the flow director data required for the FDir descriptor
+ * @raw_packet: the pre-allocated packet buffer for FDir
+ * @add: true adds a filter, false removes it
+ *
+ * Returns 0 if the filters were successfully added or removed
+ **/
+static int i40e_add_del_fdir_tcpv4(struct i40e_vsi *vsi,
+				   struct i40e_fdir_filter *fd_data,
+				   u8 *raw_packet, bool add)
+{
+	struct i40e_pf *pf = vsi->back;
+	struct tcphdr *tcp;
+	struct iphdr *ip;
+	bool err = false;
+	int ret;
+	/* Dummy packet */
+	static char packet[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x08, 0,
+		0x45, 0, 0, 0x28, 0, 0, 0x40, 0, 0x40, 0x6, 0, 0, 0, 0, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x80, 0x11,
+		0x0, 0x72, 0, 0, 0, 0};
+
+	memcpy(raw_packet, packet, I40E_TCPIP_DUMMY_PACKET_LEN);
+
+	ip = (struct iphdr *)(raw_packet + IP_HEADER_OFFSET);
+	tcp = (struct tcphdr *)(raw_packet + IP_HEADER_OFFSET
+	      + sizeof(struct iphdr));
+
+	ip->daddr = fd_data->dst_ip[0];
+	tcp->dest = fd_data->dst_port;
+	ip->saddr = fd_data->src_ip[0];
+	tcp->source = fd_data->src_port;
+
+	if (add) {
+		if (pf->flags & I40E_FLAG_FD_ATR_ENABLED) {
+			dev_info(&pf->pdev->dev, "Forcing ATR off, sideband rules for TCP/IPv4 flow being applied\n");
+			pf->flags &= ~I40E_FLAG_FD_ATR_ENABLED;
+		}
+	}
+
+	fd_data->pctype = I40E_FILTER_PCTYPE_NONF_IPV4_TCP_SYN;
+	ret = i40e_program_fdir_filter(fd_data, raw_packet, pf, add);
+
+	if (ret) {
+		dev_info(&pf->pdev->dev,
+			 "Filter command send failed for PCTYPE %d (ret = %d)\n",
+			 fd_data->pctype, ret);
+		err = true;
+	} else {
+		dev_info(&pf->pdev->dev, "Filter OK for PCTYPE %d (ret = %d)\n",
+			 fd_data->pctype, ret);
+	}
+
+	fd_data->pctype = I40E_FILTER_PCTYPE_NONF_IPV4_TCP;
+
+	ret = i40e_program_fdir_filter(fd_data, raw_packet, pf, add);
+	if (ret) {
+		dev_info(&pf->pdev->dev,
+			 "Filter command send failed for PCTYPE %d (ret = %d)\n",
+			 fd_data->pctype, ret);
+		err = true;
+	} else {
+		dev_info(&pf->pdev->dev, "Filter OK for PCTYPE %d (ret = %d)\n",
+			  fd_data->pctype, ret);
+	}
+
+	return err ? -EOPNOTSUPP : 0;
+}
+
+/**
+ * i40e_add_del_fdir_sctpv4 - Add/Remove SCTPv4 Flow Director filters for
+ * a specific flow spec
+ * @vsi: pointer to the targeted VSI
+ * @fd_data: the flow director data required for the FDir descriptor
+ * @raw_packet: the pre-allocated packet buffer for FDir
+ * @add: true adds a filter, false removes it
+ *
+ * Returns 0 if the filters were successfully added or removed
+ **/
+static int i40e_add_del_fdir_sctpv4(struct i40e_vsi *vsi,
+				    struct i40e_fdir_filter *fd_data,
+				    u8 *raw_packet, bool add)
+{
+	return -EOPNOTSUPP;
+}
+
+#define I40E_IP_DUMMY_PACKET_LEN 34
+/**
+ * i40e_add_del_fdir_ipv4 - Add/Remove IPv4 Flow Director filters for
+ * a specific flow spec
+ * @vsi: pointer to the targeted VSI
+ * @fd_data: the flow director data required for the FDir descriptor
+ * @raw_packet: the pre-allocated packet buffer for FDir
+ * @add: true adds a filter, false removes it
+ *
+ * Returns 0 if the filters were successfully added or removed
+ **/
+static int i40e_add_del_fdir_ipv4(struct i40e_vsi *vsi,
+				  struct i40e_fdir_filter *fd_data,
+				  u8 *raw_packet, bool add)
+{
+	struct i40e_pf *pf = vsi->back;
+	struct iphdr *ip;
+	bool err = false;
+	int ret;
+	int i;
+	static char packet[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x08, 0,
+		0x45, 0, 0, 0x14, 0, 0, 0x40, 0, 0x40, 0x10, 0, 0, 0, 0, 0, 0,
+		0, 0, 0, 0};
+
+	memcpy(raw_packet, packet, I40E_IP_DUMMY_PACKET_LEN);
+	ip = (struct iphdr *)(raw_packet + IP_HEADER_OFFSET);
+
+	ip->saddr = fd_data->src_ip[0];
+	ip->daddr = fd_data->dst_ip[0];
+	ip->protocol = 0;
+
+	for (i = I40E_FILTER_PCTYPE_NONF_IPV4_OTHER;
+	     i <= I40E_FILTER_PCTYPE_FRAG_IPV4;	i++) {
+		fd_data->pctype = i;
+		ret = i40e_program_fdir_filter(fd_data, raw_packet, pf, add);
+
+		if (ret) {
+			dev_info(&pf->pdev->dev,
+				 "Filter command send failed for PCTYPE %d (ret = %d)\n",
+				 fd_data->pctype, ret);
+			err = true;
+		} else {
+			dev_info(&pf->pdev->dev,
+				 "Filter OK for PCTYPE %d (ret = %d)\n",
+				 fd_data->pctype, ret);
+		}
+	}
+
+	return err ? -EOPNOTSUPP : 0;
+}
+
+/**
+ * i40e_add_del_fdir - Build raw packets to add/del fdir filter
+ * @vsi: pointer to the targeted VSI
+ * @cmd: command to get or set RX flow classification rules
+ * @add: true adds a filter, false removes it
+ *
+ **/
+int i40e_add_del_fdir(struct i40e_vsi *vsi,
+		      struct i40e_fdir_filter *input, bool add)
+{
+	struct i40e_pf *pf = vsi->back;
+	u8 *raw_packet;
+	int ret;
+
+	/* Populate the Flow Director that we have at the moment
+	 * and allocate the raw packet buffer for the calling functions
+	 */
+	raw_packet = kzalloc(I40E_FDIR_MAX_RAW_PACKET_SIZE, GFP_KERNEL);
+	if (!raw_packet)
+		return -ENOMEM;
+
+	switch (input->flow_type & ~FLOW_EXT) {
+	case TCP_V4_FLOW:
+		ret = i40e_add_del_fdir_tcpv4(vsi, input, raw_packet,
+					      add);
+		break;
+	case UDP_V4_FLOW:
+		ret = i40e_add_del_fdir_udpv4(vsi, input, raw_packet,
+					      add);
+		break;
+	case SCTP_V4_FLOW:
+		ret = i40e_add_del_fdir_sctpv4(vsi, input, raw_packet,
+					       add);
+		break;
+	case IPV4_FLOW:
+		ret = i40e_add_del_fdir_ipv4(vsi, input, raw_packet,
+					     add);
+		break;
+	case IP_USER_FLOW:
+		switch (input->ip4_proto) {
+		case IPPROTO_TCP:
+			ret = i40e_add_del_fdir_tcpv4(vsi, input,
+						      raw_packet, add);
+			break;
+		case IPPROTO_UDP:
+			ret = i40e_add_del_fdir_udpv4(vsi, input,
+						      raw_packet, add);
+			break;
+		case IPPROTO_SCTP:
+			ret = i40e_add_del_fdir_sctpv4(vsi, input,
+						       raw_packet, add);
+			break;
+		default:
+			ret = i40e_add_del_fdir_ipv4(vsi, input,
+						     raw_packet, add);
+			break;
+		}
+		break;
+	default:
+		dev_info(&pf->pdev->dev, "Could not specify spec type %d",
+			 input->flow_type);
+		ret = -EINVAL;
+	}
+
+	kfree(raw_packet);
+	return ret;
+}
+
 /**
  * i40e_fd_handle_status - check the Programming Status for FD
  * @rx_ring: the Rx ring for this descriptor
-- 
cgit v1.2.2


From cc6456af2c05eb02ec1efcddde688ac99da76e57 Mon Sep 17 00:00:00 2001
From: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Date: Thu, 6 Feb 2014 05:51:02 +0000
Subject: i40e: Prevent overflow due to kzalloc

To prevent the possibility of overflow due multiplication of number and size
use kcalloc instead of kzalloc.

Change-ID: Ibe4d81ed7d9738d3bbe66ee4844ff9be817e8080
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index 189e250198dd..42cc6ba88005 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -858,7 +858,7 @@ int i40e_alloc_vfs(struct i40e_pf *pf, u16 num_alloc_vfs)
 		}
 	}
 	/* allocate memory */
-	vfs = kzalloc(num_alloc_vfs * sizeof(struct i40e_vf), GFP_KERNEL);
+	vfs = kcalloc(num_alloc_vfs, sizeof(struct i40e_vf), GFP_KERNEL);
 	if (!vfs) {
 		ret = -ENOMEM;
 		goto err_alloc;
-- 
cgit v1.2.2


From 206812b5fccb808d1194344eaa942f68f59b2630 Mon Sep 17 00:00:00 2001
From: Jesse Brandeburg <jesse.brandeburg@intel.com>
Date: Wed, 12 Feb 2014 01:45:33 +0000
Subject: i40e/i40evf: i40e implementation for skb_set_hash

Original comment from Tom Herbert <therbert@google.com>

   Drivers should call skb_set_hash to set the hash and its type
   in an skbuff.

This patch builds upon Tom's original implementation and adds
the L4 type return when we know it is an L4 hash.
This requires use of the ptype decoder ring, so enable it.

Change-ID: I2f9fa86d1a6add58cff13386f7f4238b1abcc468
CC: Tom Herbert <therbert@google.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: Shannon Nelson <shannon.nelson@intel.com>
Acked-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_common.c      | 366 +++++++++++++++++++++
 drivers/net/ethernet/intel/i40e/i40e_prototype.h   |   7 +
 drivers/net/ethernet/intel/i40e/i40e_txrx.c        |  29 +-
 drivers/net/ethernet/intel/i40evf/i40e_common.c    | 366 +++++++++++++++++++++
 drivers/net/ethernet/intel/i40evf/i40e_prototype.h |   7 +
 drivers/net/ethernet/intel/i40evf/i40e_txrx.c      |  29 +-
 6 files changed, 800 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_common.c b/drivers/net/ethernet/intel/i40e/i40e_common.c
index e7f38b57834d..bb948dd92474 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_common.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_common.c
@@ -162,6 +162,372 @@ i40e_status i40e_aq_queue_shutdown(struct i40e_hw *hw,
 	return status;
 }
 
+/* The i40e_ptype_lookup table is used to convert from the 8-bit ptype in the
+ * hardware to a bit-field that can be used by SW to more easily determine the
+ * packet type.
+ *
+ * Macros are used to shorten the table lines and make this table human
+ * readable.
+ *
+ * We store the PTYPE in the top byte of the bit field - this is just so that
+ * we can check that the table doesn't have a row missing, as the index into
+ * the table should be the PTYPE.
+ *
+ * Typical work flow:
+ *
+ * IF NOT i40e_ptype_lookup[ptype].known
+ * THEN
+ *      Packet is unknown
+ * ELSE IF i40e_ptype_lookup[ptype].outer_ip == I40E_RX_PTYPE_OUTER_IP
+ *      Use the rest of the fields to look at the tunnels, inner protocols, etc
+ * ELSE
+ *      Use the enum i40e_rx_l2_ptype to decode the packet type
+ * ENDIF
+ */
+
+/* macro to make the table lines short */
+#define I40E_PTT(PTYPE, OUTER_IP, OUTER_IP_VER, OUTER_FRAG, T, TE, TEF, I, PL)\
+	{	PTYPE, \
+		1, \
+		I40E_RX_PTYPE_OUTER_##OUTER_IP, \
+		I40E_RX_PTYPE_OUTER_##OUTER_IP_VER, \
+		I40E_RX_PTYPE_##OUTER_FRAG, \
+		I40E_RX_PTYPE_TUNNEL_##T, \
+		I40E_RX_PTYPE_TUNNEL_END_##TE, \
+		I40E_RX_PTYPE_##TEF, \
+		I40E_RX_PTYPE_INNER_PROT_##I, \
+		I40E_RX_PTYPE_PAYLOAD_LAYER_##PL }
+
+#define I40E_PTT_UNUSED_ENTRY(PTYPE) \
+		{ PTYPE, 0, 0, 0, 0, 0, 0, 0, 0, 0 }
+
+/* shorter macros makes the table fit but are terse */
+#define I40E_RX_PTYPE_NOF		I40E_RX_PTYPE_NOT_FRAG
+#define I40E_RX_PTYPE_FRG		I40E_RX_PTYPE_FRAG
+#define I40E_RX_PTYPE_INNER_PROT_TS	I40E_RX_PTYPE_INNER_PROT_TIMESYNC
+
+/* Lookup table mapping the HW PTYPE to the bit field for decoding */
+struct i40e_rx_ptype_decoded i40e_ptype_lookup[] = {
+	/* L2 Packet types */
+	I40E_PTT_UNUSED_ENTRY(0),
+	I40E_PTT(1,  L2, NONE, NOF, NONE, NONE, NOF, NONE, PAY2),
+	I40E_PTT(2,  L2, NONE, NOF, NONE, NONE, NOF, TS,   PAY2),
+	I40E_PTT(3,  L2, NONE, NOF, NONE, NONE, NOF, NONE, PAY2),
+	I40E_PTT_UNUSED_ENTRY(4),
+	I40E_PTT_UNUSED_ENTRY(5),
+	I40E_PTT(6,  L2, NONE, NOF, NONE, NONE, NOF, NONE, PAY2),
+	I40E_PTT(7,  L2, NONE, NOF, NONE, NONE, NOF, NONE, PAY2),
+	I40E_PTT_UNUSED_ENTRY(8),
+	I40E_PTT_UNUSED_ENTRY(9),
+	I40E_PTT(10, L2, NONE, NOF, NONE, NONE, NOF, NONE, PAY2),
+	I40E_PTT(11, L2, NONE, NOF, NONE, NONE, NOF, NONE, NONE),
+	I40E_PTT(12, L2, NONE, NOF, NONE, NONE, NOF, NONE, PAY3),
+	I40E_PTT(13, L2, NONE, NOF, NONE, NONE, NOF, NONE, PAY3),
+	I40E_PTT(14, L2, NONE, NOF, NONE, NONE, NOF, NONE, PAY3),
+	I40E_PTT(15, L2, NONE, NOF, NONE, NONE, NOF, NONE, PAY3),
+	I40E_PTT(16, L2, NONE, NOF, NONE, NONE, NOF, NONE, PAY3),
+	I40E_PTT(17, L2, NONE, NOF, NONE, NONE, NOF, NONE, PAY3),
+	I40E_PTT(18, L2, NONE, NOF, NONE, NONE, NOF, NONE, PAY3),
+	I40E_PTT(19, L2, NONE, NOF, NONE, NONE, NOF, NONE, PAY3),
+	I40E_PTT(20, L2, NONE, NOF, NONE, NONE, NOF, NONE, PAY3),
+	I40E_PTT(21, L2, NONE, NOF, NONE, NONE, NOF, NONE, PAY3),
+
+	/* Non Tunneled IPv4 */
+	I40E_PTT(22, IP, IPV4, FRG, NONE, NONE, NOF, NONE, PAY3),
+	I40E_PTT(23, IP, IPV4, NOF, NONE, NONE, NOF, NONE, PAY3),
+	I40E_PTT(24, IP, IPV4, NOF, NONE, NONE, NOF, UDP,  PAY4),
+	I40E_PTT_UNUSED_ENTRY(25),
+	I40E_PTT(26, IP, IPV4, NOF, NONE, NONE, NOF, TCP,  PAY4),
+	I40E_PTT(27, IP, IPV4, NOF, NONE, NONE, NOF, SCTP, PAY4),
+	I40E_PTT(28, IP, IPV4, NOF, NONE, NONE, NOF, ICMP, PAY4),
+
+	/* IPv4 --> IPv4 */
+	I40E_PTT(29, IP, IPV4, NOF, IP_IP, IPV4, FRG, NONE, PAY3),
+	I40E_PTT(30, IP, IPV4, NOF, IP_IP, IPV4, NOF, NONE, PAY3),
+	I40E_PTT(31, IP, IPV4, NOF, IP_IP, IPV4, NOF, UDP,  PAY4),
+	I40E_PTT_UNUSED_ENTRY(32),
+	I40E_PTT(33, IP, IPV4, NOF, IP_IP, IPV4, NOF, TCP,  PAY4),
+	I40E_PTT(34, IP, IPV4, NOF, IP_IP, IPV4, NOF, SCTP, PAY4),
+	I40E_PTT(35, IP, IPV4, NOF, IP_IP, IPV4, NOF, ICMP, PAY4),
+
+	/* IPv4 --> IPv6 */
+	I40E_PTT(36, IP, IPV4, NOF, IP_IP, IPV6, FRG, NONE, PAY3),
+	I40E_PTT(37, IP, IPV4, NOF, IP_IP, IPV6, NOF, NONE, PAY3),
+	I40E_PTT(38, IP, IPV4, NOF, IP_IP, IPV6, NOF, UDP,  PAY4),
+	I40E_PTT_UNUSED_ENTRY(39),
+	I40E_PTT(40, IP, IPV4, NOF, IP_IP, IPV6, NOF, TCP,  PAY4),
+	I40E_PTT(41, IP, IPV4, NOF, IP_IP, IPV6, NOF, SCTP, PAY4),
+	I40E_PTT(42, IP, IPV4, NOF, IP_IP, IPV6, NOF, ICMP, PAY4),
+
+	/* IPv4 --> GRE/NAT */
+	I40E_PTT(43, IP, IPV4, NOF, IP_GRENAT, NONE, NOF, NONE, PAY3),
+
+	/* IPv4 --> GRE/NAT --> IPv4 */
+	I40E_PTT(44, IP, IPV4, NOF, IP_GRENAT, IPV4, FRG, NONE, PAY3),
+	I40E_PTT(45, IP, IPV4, NOF, IP_GRENAT, IPV4, NOF, NONE, PAY3),
+	I40E_PTT(46, IP, IPV4, NOF, IP_GRENAT, IPV4, NOF, UDP,  PAY4),
+	I40E_PTT_UNUSED_ENTRY(47),
+	I40E_PTT(48, IP, IPV4, NOF, IP_GRENAT, IPV4, NOF, TCP,  PAY4),
+	I40E_PTT(49, IP, IPV4, NOF, IP_GRENAT, IPV4, NOF, SCTP, PAY4),
+	I40E_PTT(50, IP, IPV4, NOF, IP_GRENAT, IPV4, NOF, ICMP, PAY4),
+
+	/* IPv4 --> GRE/NAT --> IPv6 */
+	I40E_PTT(51, IP, IPV4, NOF, IP_GRENAT, IPV6, FRG, NONE, PAY3),
+	I40E_PTT(52, IP, IPV4, NOF, IP_GRENAT, IPV6, NOF, NONE, PAY3),
+	I40E_PTT(53, IP, IPV4, NOF, IP_GRENAT, IPV6, NOF, UDP,  PAY4),
+	I40E_PTT_UNUSED_ENTRY(54),
+	I40E_PTT(55, IP, IPV4, NOF, IP_GRENAT, IPV6, NOF, TCP,  PAY4),
+	I40E_PTT(56, IP, IPV4, NOF, IP_GRENAT, IPV6, NOF, SCTP, PAY4),
+	I40E_PTT(57, IP, IPV4, NOF, IP_GRENAT, IPV6, NOF, ICMP, PAY4),
+
+	/* IPv4 --> GRE/NAT --> MAC */
+	I40E_PTT(58, IP, IPV4, NOF, IP_GRENAT_MAC, NONE, NOF, NONE, PAY3),
+
+	/* IPv4 --> GRE/NAT --> MAC --> IPv4 */
+	I40E_PTT(59, IP, IPV4, NOF, IP_GRENAT_MAC, IPV4, FRG, NONE, PAY3),
+	I40E_PTT(60, IP, IPV4, NOF, IP_GRENAT_MAC, IPV4, NOF, NONE, PAY3),
+	I40E_PTT(61, IP, IPV4, NOF, IP_GRENAT_MAC, IPV4, NOF, UDP,  PAY4),
+	I40E_PTT_UNUSED_ENTRY(62),
+	I40E_PTT(63, IP, IPV4, NOF, IP_GRENAT_MAC, IPV4, NOF, TCP,  PAY4),
+	I40E_PTT(64, IP, IPV4, NOF, IP_GRENAT_MAC, IPV4, NOF, SCTP, PAY4),
+	I40E_PTT(65, IP, IPV4, NOF, IP_GRENAT_MAC, IPV4, NOF, ICMP, PAY4),
+
+	/* IPv4 --> GRE/NAT -> MAC --> IPv6 */
+	I40E_PTT(66, IP, IPV4, NOF, IP_GRENAT_MAC, IPV6, FRG, NONE, PAY3),
+	I40E_PTT(67, IP, IPV4, NOF, IP_GRENAT_MAC, IPV6, NOF, NONE, PAY3),
+	I40E_PTT(68, IP, IPV4, NOF, IP_GRENAT_MAC, IPV6, NOF, UDP,  PAY4),
+	I40E_PTT_UNUSED_ENTRY(69),
+	I40E_PTT(70, IP, IPV4, NOF, IP_GRENAT_MAC, IPV6, NOF, TCP,  PAY4),
+	I40E_PTT(71, IP, IPV4, NOF, IP_GRENAT_MAC, IPV6, NOF, SCTP, PAY4),
+	I40E_PTT(72, IP, IPV4, NOF, IP_GRENAT_MAC, IPV6, NOF, ICMP, PAY4),
+
+	/* IPv4 --> GRE/NAT --> MAC/VLAN */
+	I40E_PTT(73, IP, IPV4, NOF, IP_GRENAT_MAC_VLAN, NONE, NOF, NONE, PAY3),
+
+	/* IPv4 ---> GRE/NAT -> MAC/VLAN --> IPv4 */
+	I40E_PTT(74, IP, IPV4, NOF, IP_GRENAT_MAC_VLAN, IPV4, FRG, NONE, PAY3),
+	I40E_PTT(75, IP, IPV4, NOF, IP_GRENAT_MAC_VLAN, IPV4, NOF, NONE, PAY3),
+	I40E_PTT(76, IP, IPV4, NOF, IP_GRENAT_MAC_VLAN, IPV4, NOF, UDP,  PAY4),
+	I40E_PTT_UNUSED_ENTRY(77),
+	I40E_PTT(78, IP, IPV4, NOF, IP_GRENAT_MAC_VLAN, IPV4, NOF, TCP,  PAY4),
+	I40E_PTT(79, IP, IPV4, NOF, IP_GRENAT_MAC_VLAN, IPV4, NOF, SCTP, PAY4),
+	I40E_PTT(80, IP, IPV4, NOF, IP_GRENAT_MAC_VLAN, IPV4, NOF, ICMP, PAY4),
+
+	/* IPv4 -> GRE/NAT -> MAC/VLAN --> IPv6 */
+	I40E_PTT(81, IP, IPV4, NOF, IP_GRENAT_MAC_VLAN, IPV6, FRG, NONE, PAY3),
+	I40E_PTT(82, IP, IPV4, NOF, IP_GRENAT_MAC_VLAN, IPV6, NOF, NONE, PAY3),
+	I40E_PTT(83, IP, IPV4, NOF, IP_GRENAT_MAC_VLAN, IPV6, NOF, UDP,  PAY4),
+	I40E_PTT_UNUSED_ENTRY(84),
+	I40E_PTT(85, IP, IPV4, NOF, IP_GRENAT_MAC_VLAN, IPV6, NOF, TCP,  PAY4),
+	I40E_PTT(86, IP, IPV4, NOF, IP_GRENAT_MAC_VLAN, IPV6, NOF, SCTP, PAY4),
+	I40E_PTT(87, IP, IPV4, NOF, IP_GRENAT_MAC_VLAN, IPV6, NOF, ICMP, PAY4),
+
+	/* Non Tunneled IPv6 */
+	I40E_PTT(88, IP, IPV6, FRG, NONE, NONE, NOF, NONE, PAY3),
+	I40E_PTT(89, IP, IPV6, NOF, NONE, NONE, NOF, NONE, PAY3),
+	I40E_PTT(90, IP, IPV6, NOF, NONE, NONE, NOF, UDP,  PAY3),
+	I40E_PTT_UNUSED_ENTRY(91),
+	I40E_PTT(92, IP, IPV6, NOF, NONE, NONE, NOF, TCP,  PAY4),
+	I40E_PTT(93, IP, IPV6, NOF, NONE, NONE, NOF, SCTP, PAY4),
+	I40E_PTT(94, IP, IPV6, NOF, NONE, NONE, NOF, ICMP, PAY4),
+
+	/* IPv6 --> IPv4 */
+	I40E_PTT(95,  IP, IPV6, NOF, IP_IP, IPV4, FRG, NONE, PAY3),
+	I40E_PTT(96,  IP, IPV6, NOF, IP_IP, IPV4, NOF, NONE, PAY3),
+	I40E_PTT(97,  IP, IPV6, NOF, IP_IP, IPV4, NOF, UDP,  PAY4),
+	I40E_PTT_UNUSED_ENTRY(98),
+	I40E_PTT(99,  IP, IPV6, NOF, IP_IP, IPV4, NOF, TCP,  PAY4),
+	I40E_PTT(100, IP, IPV6, NOF, IP_IP, IPV4, NOF, SCTP, PAY4),
+	I40E_PTT(101, IP, IPV6, NOF, IP_IP, IPV4, NOF, ICMP, PAY4),
+
+	/* IPv6 --> IPv6 */
+	I40E_PTT(102, IP, IPV6, NOF, IP_IP, IPV6, FRG, NONE, PAY3),
+	I40E_PTT(103, IP, IPV6, NOF, IP_IP, IPV6, NOF, NONE, PAY3),
+	I40E_PTT(104, IP, IPV6, NOF, IP_IP, IPV6, NOF, UDP,  PAY4),
+	I40E_PTT_UNUSED_ENTRY(105),
+	I40E_PTT(106, IP, IPV6, NOF, IP_IP, IPV6, NOF, TCP,  PAY4),
+	I40E_PTT(107, IP, IPV6, NOF, IP_IP, IPV6, NOF, SCTP, PAY4),
+	I40E_PTT(108, IP, IPV6, NOF, IP_IP, IPV6, NOF, ICMP, PAY4),
+
+	/* IPv6 --> GRE/NAT */
+	I40E_PTT(109, IP, IPV6, NOF, IP_GRENAT, NONE, NOF, NONE, PAY3),
+
+	/* IPv6 --> GRE/NAT -> IPv4 */
+	I40E_PTT(110, IP, IPV6, NOF, IP_GRENAT, IPV4, FRG, NONE, PAY3),
+	I40E_PTT(111, IP, IPV6, NOF, IP_GRENAT, IPV4, NOF, NONE, PAY3),
+	I40E_PTT(112, IP, IPV6, NOF, IP_GRENAT, IPV4, NOF, UDP,  PAY4),
+	I40E_PTT_UNUSED_ENTRY(113),
+	I40E_PTT(114, IP, IPV6, NOF, IP_GRENAT, IPV4, NOF, TCP,  PAY4),
+	I40E_PTT(115, IP, IPV6, NOF, IP_GRENAT, IPV4, NOF, SCTP, PAY4),
+	I40E_PTT(116, IP, IPV6, NOF, IP_GRENAT, IPV4, NOF, ICMP, PAY4),
+
+	/* IPv6 --> GRE/NAT -> IPv6 */
+	I40E_PTT(117, IP, IPV6, NOF, IP_GRENAT, IPV6, FRG, NONE, PAY3),
+	I40E_PTT(118, IP, IPV6, NOF, IP_GRENAT, IPV6, NOF, NONE, PAY3),
+	I40E_PTT(119, IP, IPV6, NOF, IP_GRENAT, IPV6, NOF, UDP,  PAY4),
+	I40E_PTT_UNUSED_ENTRY(120),
+	I40E_PTT(121, IP, IPV6, NOF, IP_GRENAT, IPV6, NOF, TCP,  PAY4),
+	I40E_PTT(122, IP, IPV6, NOF, IP_GRENAT, IPV6, NOF, SCTP, PAY4),
+	I40E_PTT(123, IP, IPV6, NOF, IP_GRENAT, IPV6, NOF, ICMP, PAY4),
+
+	/* IPv6 --> GRE/NAT -> MAC */
+	I40E_PTT(124, IP, IPV6, NOF, IP_GRENAT_MAC, NONE, NOF, NONE, PAY3),
+
+	/* IPv6 --> GRE/NAT -> MAC -> IPv4 */
+	I40E_PTT(125, IP, IPV6, NOF, IP_GRENAT_MAC, IPV4, FRG, NONE, PAY3),
+	I40E_PTT(126, IP, IPV6, NOF, IP_GRENAT_MAC, IPV4, NOF, NONE, PAY3),
+	I40E_PTT(127, IP, IPV6, NOF, IP_GRENAT_MAC, IPV4, NOF, UDP,  PAY4),
+	I40E_PTT_UNUSED_ENTRY(128),
+	I40E_PTT(129, IP, IPV6, NOF, IP_GRENAT_MAC, IPV4, NOF, TCP,  PAY4),
+	I40E_PTT(130, IP, IPV6, NOF, IP_GRENAT_MAC, IPV4, NOF, SCTP, PAY4),
+	I40E_PTT(131, IP, IPV6, NOF, IP_GRENAT_MAC, IPV4, NOF, ICMP, PAY4),
+
+	/* IPv6 --> GRE/NAT -> MAC -> IPv6 */
+	I40E_PTT(132, IP, IPV6, NOF, IP_GRENAT_MAC, IPV6, FRG, NONE, PAY3),
+	I40E_PTT(133, IP, IPV6, NOF, IP_GRENAT_MAC, IPV6, NOF, NONE, PAY3),
+	I40E_PTT(134, IP, IPV6, NOF, IP_GRENAT_MAC, IPV6, NOF, UDP,  PAY4),
+	I40E_PTT_UNUSED_ENTRY(135),
+	I40E_PTT(136, IP, IPV6, NOF, IP_GRENAT_MAC, IPV6, NOF, TCP,  PAY4),
+	I40E_PTT(137, IP, IPV6, NOF, IP_GRENAT_MAC, IPV6, NOF, SCTP, PAY4),
+	I40E_PTT(138, IP, IPV6, NOF, IP_GRENAT_MAC, IPV6, NOF, ICMP, PAY4),
+
+	/* IPv6 --> GRE/NAT -> MAC/VLAN */
+	I40E_PTT(139, IP, IPV6, NOF, IP_GRENAT_MAC_VLAN, NONE, NOF, NONE, PAY3),
+
+	/* IPv6 --> GRE/NAT -> MAC/VLAN --> IPv4 */
+	I40E_PTT(140, IP, IPV6, NOF, IP_GRENAT_MAC_VLAN, IPV4, FRG, NONE, PAY3),
+	I40E_PTT(141, IP, IPV6, NOF, IP_GRENAT_MAC_VLAN, IPV4, NOF, NONE, PAY3),
+	I40E_PTT(142, IP, IPV6, NOF, IP_GRENAT_MAC_VLAN, IPV4, NOF, UDP,  PAY4),
+	I40E_PTT_UNUSED_ENTRY(143),
+	I40E_PTT(144, IP, IPV6, NOF, IP_GRENAT_MAC_VLAN, IPV4, NOF, TCP,  PAY4),
+	I40E_PTT(145, IP, IPV6, NOF, IP_GRENAT_MAC_VLAN, IPV4, NOF, SCTP, PAY4),
+	I40E_PTT(146, IP, IPV6, NOF, IP_GRENAT_MAC_VLAN, IPV4, NOF, ICMP, PAY4),
+
+	/* IPv6 --> GRE/NAT -> MAC/VLAN --> IPv6 */
+	I40E_PTT(147, IP, IPV6, NOF, IP_GRENAT_MAC_VLAN, IPV6, FRG, NONE, PAY3),
+	I40E_PTT(148, IP, IPV6, NOF, IP_GRENAT_MAC_VLAN, IPV6, NOF, NONE, PAY3),
+	I40E_PTT(149, IP, IPV6, NOF, IP_GRENAT_MAC_VLAN, IPV6, NOF, UDP,  PAY4),
+	I40E_PTT_UNUSED_ENTRY(150),
+	I40E_PTT(151, IP, IPV6, NOF, IP_GRENAT_MAC_VLAN, IPV6, NOF, TCP,  PAY4),
+	I40E_PTT(152, IP, IPV6, NOF, IP_GRENAT_MAC_VLAN, IPV6, NOF, SCTP, PAY4),
+	I40E_PTT(153, IP, IPV6, NOF, IP_GRENAT_MAC_VLAN, IPV6, NOF, ICMP, PAY4),
+
+	/* unused entries */
+	I40E_PTT_UNUSED_ENTRY(154),
+	I40E_PTT_UNUSED_ENTRY(155),
+	I40E_PTT_UNUSED_ENTRY(156),
+	I40E_PTT_UNUSED_ENTRY(157),
+	I40E_PTT_UNUSED_ENTRY(158),
+	I40E_PTT_UNUSED_ENTRY(159),
+
+	I40E_PTT_UNUSED_ENTRY(160),
+	I40E_PTT_UNUSED_ENTRY(161),
+	I40E_PTT_UNUSED_ENTRY(162),
+	I40E_PTT_UNUSED_ENTRY(163),
+	I40E_PTT_UNUSED_ENTRY(164),
+	I40E_PTT_UNUSED_ENTRY(165),
+	I40E_PTT_UNUSED_ENTRY(166),
+	I40E_PTT_UNUSED_ENTRY(167),
+	I40E_PTT_UNUSED_ENTRY(168),
+	I40E_PTT_UNUSED_ENTRY(169),
+
+	I40E_PTT_UNUSED_ENTRY(170),
+	I40E_PTT_UNUSED_ENTRY(171),
+	I40E_PTT_UNUSED_ENTRY(172),
+	I40E_PTT_UNUSED_ENTRY(173),
+	I40E_PTT_UNUSED_ENTRY(174),
+	I40E_PTT_UNUSED_ENTRY(175),
+	I40E_PTT_UNUSED_ENTRY(176),
+	I40E_PTT_UNUSED_ENTRY(177),
+	I40E_PTT_UNUSED_ENTRY(178),
+	I40E_PTT_UNUSED_ENTRY(179),
+
+	I40E_PTT_UNUSED_ENTRY(180),
+	I40E_PTT_UNUSED_ENTRY(181),
+	I40E_PTT_UNUSED_ENTRY(182),
+	I40E_PTT_UNUSED_ENTRY(183),
+	I40E_PTT_UNUSED_ENTRY(184),
+	I40E_PTT_UNUSED_ENTRY(185),
+	I40E_PTT_UNUSED_ENTRY(186),
+	I40E_PTT_UNUSED_ENTRY(187),
+	I40E_PTT_UNUSED_ENTRY(188),
+	I40E_PTT_UNUSED_ENTRY(189),
+
+	I40E_PTT_UNUSED_ENTRY(190),
+	I40E_PTT_UNUSED_ENTRY(191),
+	I40E_PTT_UNUSED_ENTRY(192),
+	I40E_PTT_UNUSED_ENTRY(193),
+	I40E_PTT_UNUSED_ENTRY(194),
+	I40E_PTT_UNUSED_ENTRY(195),
+	I40E_PTT_UNUSED_ENTRY(196),
+	I40E_PTT_UNUSED_ENTRY(197),
+	I40E_PTT_UNUSED_ENTRY(198),
+	I40E_PTT_UNUSED_ENTRY(199),
+
+	I40E_PTT_UNUSED_ENTRY(200),
+	I40E_PTT_UNUSED_ENTRY(201),
+	I40E_PTT_UNUSED_ENTRY(202),
+	I40E_PTT_UNUSED_ENTRY(203),
+	I40E_PTT_UNUSED_ENTRY(204),
+	I40E_PTT_UNUSED_ENTRY(205),
+	I40E_PTT_UNUSED_ENTRY(206),
+	I40E_PTT_UNUSED_ENTRY(207),
+	I40E_PTT_UNUSED_ENTRY(208),
+	I40E_PTT_UNUSED_ENTRY(209),
+
+	I40E_PTT_UNUSED_ENTRY(210),
+	I40E_PTT_UNUSED_ENTRY(211),
+	I40E_PTT_UNUSED_ENTRY(212),
+	I40E_PTT_UNUSED_ENTRY(213),
+	I40E_PTT_UNUSED_ENTRY(214),
+	I40E_PTT_UNUSED_ENTRY(215),
+	I40E_PTT_UNUSED_ENTRY(216),
+	I40E_PTT_UNUSED_ENTRY(217),
+	I40E_PTT_UNUSED_ENTRY(218),
+	I40E_PTT_UNUSED_ENTRY(219),
+
+	I40E_PTT_UNUSED_ENTRY(220),
+	I40E_PTT_UNUSED_ENTRY(221),
+	I40E_PTT_UNUSED_ENTRY(222),
+	I40E_PTT_UNUSED_ENTRY(223),
+	I40E_PTT_UNUSED_ENTRY(224),
+	I40E_PTT_UNUSED_ENTRY(225),
+	I40E_PTT_UNUSED_ENTRY(226),
+	I40E_PTT_UNUSED_ENTRY(227),
+	I40E_PTT_UNUSED_ENTRY(228),
+	I40E_PTT_UNUSED_ENTRY(229),
+
+	I40E_PTT_UNUSED_ENTRY(230),
+	I40E_PTT_UNUSED_ENTRY(231),
+	I40E_PTT_UNUSED_ENTRY(232),
+	I40E_PTT_UNUSED_ENTRY(233),
+	I40E_PTT_UNUSED_ENTRY(234),
+	I40E_PTT_UNUSED_ENTRY(235),
+	I40E_PTT_UNUSED_ENTRY(236),
+	I40E_PTT_UNUSED_ENTRY(237),
+	I40E_PTT_UNUSED_ENTRY(238),
+	I40E_PTT_UNUSED_ENTRY(239),
+
+	I40E_PTT_UNUSED_ENTRY(240),
+	I40E_PTT_UNUSED_ENTRY(241),
+	I40E_PTT_UNUSED_ENTRY(242),
+	I40E_PTT_UNUSED_ENTRY(243),
+	I40E_PTT_UNUSED_ENTRY(244),
+	I40E_PTT_UNUSED_ENTRY(245),
+	I40E_PTT_UNUSED_ENTRY(246),
+	I40E_PTT_UNUSED_ENTRY(247),
+	I40E_PTT_UNUSED_ENTRY(248),
+	I40E_PTT_UNUSED_ENTRY(249),
+
+	I40E_PTT_UNUSED_ENTRY(250),
+	I40E_PTT_UNUSED_ENTRY(251),
+	I40E_PTT_UNUSED_ENTRY(252),
+	I40E_PTT_UNUSED_ENTRY(253),
+	I40E_PTT_UNUSED_ENTRY(254),
+	I40E_PTT_UNUSED_ENTRY(255)
+};
+
+
 /**
  * i40e_init_shared_code - Initialize the shared code
  * @hw: pointer to hardware structure
diff --git a/drivers/net/ethernet/intel/i40e/i40e_prototype.h b/drivers/net/ethernet/intel/i40e/i40e_prototype.h
index ed91f93ede2b..9cd57e617959 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_prototype.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_prototype.h
@@ -231,6 +231,13 @@ i40e_status i40e_validate_nvm_checksum(struct i40e_hw *hw,
 						 u16 *checksum);
 void i40e_set_pci_config_data(struct i40e_hw *hw, u16 link_status);
 
+extern struct i40e_rx_ptype_decoded i40e_ptype_lookup[];
+
+static inline struct i40e_rx_ptype_decoded decode_rx_desc_ptype(u8 ptype)
+{
+	return i40e_ptype_lookup[ptype];
+}
+
 /* prototype for functions used for SW locks */
 
 /* i40e_common for VF drivers*/
diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index 7a9fa4ec1a32..e4497f8e117d 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -25,6 +25,7 @@
  ******************************************************************************/
 
 #include "i40e.h"
+#include "i40e_prototype.h"
 
 static inline __le64 build_ctob(u32 td_cmd, u32 td_offset, unsigned int size,
 				u32 td_tag)
@@ -1220,6 +1221,29 @@ static inline u32 i40e_rx_hash(struct i40e_ring *ring,
 		return 0;
 }
 
+/**
+ * i40e_ptype_to_hash - get a hash type
+ * @ptype: the ptype value from the descriptor
+ *
+ * Returns a hash type to be used by skb_set_hash
+ **/
+static inline enum pkt_hash_types i40e_ptype_to_hash(u8 ptype)
+{
+	struct i40e_rx_ptype_decoded decoded = decode_rx_desc_ptype(ptype);
+
+	if (!decoded.known)
+		return PKT_HASH_TYPE_NONE;
+
+	if (decoded.outer_ip == I40E_RX_PTYPE_OUTER_IP &&
+	    decoded.payload_layer == I40E_RX_PTYPE_PAYLOAD_LAYER_PAY4)
+		return PKT_HASH_TYPE_L4;
+	else if (decoded.outer_ip == I40E_RX_PTYPE_OUTER_IP &&
+		 decoded.payload_layer == I40E_RX_PTYPE_PAYLOAD_LAYER_PAY3)
+		return PKT_HASH_TYPE_L3;
+	else
+		return PKT_HASH_TYPE_L2;
+}
+
 /**
  * i40e_clean_rx_irq - Reclaim resources after receive completes
  * @rx_ring:  rx ring to clean
@@ -1237,8 +1261,8 @@ static int i40e_clean_rx_irq(struct i40e_ring *rx_ring, int budget)
 	u16 i = rx_ring->next_to_clean;
 	union i40e_rx_desc *rx_desc;
 	u32 rx_error, rx_status;
+	u8 rx_ptype;
 	u64 qword;
-	u16 rx_ptype;
 
 	rx_desc = I40E_RX_DESC(rx_ring, i);
 	qword = le64_to_cpu(rx_desc->wb.qword1.status_error_len);
@@ -1352,7 +1376,8 @@ static int i40e_clean_rx_irq(struct i40e_ring *rx_ring, int budget)
 			goto next_desc;
 		}
 
-		skb->rxhash = i40e_rx_hash(rx_ring, rx_desc);
+		skb_set_hash(skb, i40e_rx_hash(rx_ring, rx_desc),
+			     i40e_ptype_to_hash(rx_ptype));
 		if (unlikely(rx_status & I40E_RXD_QW1_STATUS_TSYNVALID_MASK)) {
 			i40e_ptp_rx_hwtstamp(vsi->back, skb, (rx_status &
 					   I40E_RXD_QW1_STATUS_TSYNINDX_MASK) >>
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_common.c b/drivers/net/ethernet/intel/i40evf/i40e_common.c
index 7b13953b28c4..78618af271cf 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_common.c
+++ b/drivers/net/ethernet/intel/i40evf/i40e_common.c
@@ -160,6 +160,372 @@ i40e_status i40evf_aq_queue_shutdown(struct i40e_hw *hw,
 }
 
 
+/* The i40e_ptype_lookup table is used to convert from the 8-bit ptype in the
+ * hardware to a bit-field that can be used by SW to more easily determine the
+ * packet type.
+ *
+ * Macros are used to shorten the table lines and make this table human
+ * readable.
+ *
+ * We store the PTYPE in the top byte of the bit field - this is just so that
+ * we can check that the table doesn't have a row missing, as the index into
+ * the table should be the PTYPE.
+ *
+ * Typical work flow:
+ *
+ * IF NOT i40e_ptype_lookup[ptype].known
+ * THEN
+ *      Packet is unknown
+ * ELSE IF i40e_ptype_lookup[ptype].outer_ip == I40E_RX_PTYPE_OUTER_IP
+ *      Use the rest of the fields to look at the tunnels, inner protocols, etc
+ * ELSE
+ *      Use the enum i40e_rx_l2_ptype to decode the packet type
+ * ENDIF
+ */
+
+/* macro to make the table lines short */
+#define I40E_PTT(PTYPE, OUTER_IP, OUTER_IP_VER, OUTER_FRAG, T, TE, TEF, I, PL)\
+	{	PTYPE, \
+		1, \
+		I40E_RX_PTYPE_OUTER_##OUTER_IP, \
+		I40E_RX_PTYPE_OUTER_##OUTER_IP_VER, \
+		I40E_RX_PTYPE_##OUTER_FRAG, \
+		I40E_RX_PTYPE_TUNNEL_##T, \
+		I40E_RX_PTYPE_TUNNEL_END_##TE, \
+		I40E_RX_PTYPE_##TEF, \
+		I40E_RX_PTYPE_INNER_PROT_##I, \
+		I40E_RX_PTYPE_PAYLOAD_LAYER_##PL }
+
+#define I40E_PTT_UNUSED_ENTRY(PTYPE) \
+		{ PTYPE, 0, 0, 0, 0, 0, 0, 0, 0, 0 }
+
+/* shorter macros makes the table fit but are terse */
+#define I40E_RX_PTYPE_NOF		I40E_RX_PTYPE_NOT_FRAG
+#define I40E_RX_PTYPE_FRG		I40E_RX_PTYPE_FRAG
+#define I40E_RX_PTYPE_INNER_PROT_TS	I40E_RX_PTYPE_INNER_PROT_TIMESYNC
+
+/* Lookup table mapping the HW PTYPE to the bit field for decoding */
+struct i40e_rx_ptype_decoded i40e_ptype_lookup[] = {
+	/* L2 Packet types */
+	I40E_PTT_UNUSED_ENTRY(0),
+	I40E_PTT(1,  L2, NONE, NOF, NONE, NONE, NOF, NONE, PAY2),
+	I40E_PTT(2,  L2, NONE, NOF, NONE, NONE, NOF, TS,   PAY2),
+	I40E_PTT(3,  L2, NONE, NOF, NONE, NONE, NOF, NONE, PAY2),
+	I40E_PTT_UNUSED_ENTRY(4),
+	I40E_PTT_UNUSED_ENTRY(5),
+	I40E_PTT(6,  L2, NONE, NOF, NONE, NONE, NOF, NONE, PAY2),
+	I40E_PTT(7,  L2, NONE, NOF, NONE, NONE, NOF, NONE, PAY2),
+	I40E_PTT_UNUSED_ENTRY(8),
+	I40E_PTT_UNUSED_ENTRY(9),
+	I40E_PTT(10, L2, NONE, NOF, NONE, NONE, NOF, NONE, PAY2),
+	I40E_PTT(11, L2, NONE, NOF, NONE, NONE, NOF, NONE, NONE),
+	I40E_PTT(12, L2, NONE, NOF, NONE, NONE, NOF, NONE, PAY3),
+	I40E_PTT(13, L2, NONE, NOF, NONE, NONE, NOF, NONE, PAY3),
+	I40E_PTT(14, L2, NONE, NOF, NONE, NONE, NOF, NONE, PAY3),
+	I40E_PTT(15, L2, NONE, NOF, NONE, NONE, NOF, NONE, PAY3),
+	I40E_PTT(16, L2, NONE, NOF, NONE, NONE, NOF, NONE, PAY3),
+	I40E_PTT(17, L2, NONE, NOF, NONE, NONE, NOF, NONE, PAY3),
+	I40E_PTT(18, L2, NONE, NOF, NONE, NONE, NOF, NONE, PAY3),
+	I40E_PTT(19, L2, NONE, NOF, NONE, NONE, NOF, NONE, PAY3),
+	I40E_PTT(20, L2, NONE, NOF, NONE, NONE, NOF, NONE, PAY3),
+	I40E_PTT(21, L2, NONE, NOF, NONE, NONE, NOF, NONE, PAY3),
+
+	/* Non Tunneled IPv4 */
+	I40E_PTT(22, IP, IPV4, FRG, NONE, NONE, NOF, NONE, PAY3),
+	I40E_PTT(23, IP, IPV4, NOF, NONE, NONE, NOF, NONE, PAY3),
+	I40E_PTT(24, IP, IPV4, NOF, NONE, NONE, NOF, UDP,  PAY4),
+	I40E_PTT_UNUSED_ENTRY(25),
+	I40E_PTT(26, IP, IPV4, NOF, NONE, NONE, NOF, TCP,  PAY4),
+	I40E_PTT(27, IP, IPV4, NOF, NONE, NONE, NOF, SCTP, PAY4),
+	I40E_PTT(28, IP, IPV4, NOF, NONE, NONE, NOF, ICMP, PAY4),
+
+	/* IPv4 --> IPv4 */
+	I40E_PTT(29, IP, IPV4, NOF, IP_IP, IPV4, FRG, NONE, PAY3),
+	I40E_PTT(30, IP, IPV4, NOF, IP_IP, IPV4, NOF, NONE, PAY3),
+	I40E_PTT(31, IP, IPV4, NOF, IP_IP, IPV4, NOF, UDP,  PAY4),
+	I40E_PTT_UNUSED_ENTRY(32),
+	I40E_PTT(33, IP, IPV4, NOF, IP_IP, IPV4, NOF, TCP,  PAY4),
+	I40E_PTT(34, IP, IPV4, NOF, IP_IP, IPV4, NOF, SCTP, PAY4),
+	I40E_PTT(35, IP, IPV4, NOF, IP_IP, IPV4, NOF, ICMP, PAY4),
+
+	/* IPv4 --> IPv6 */
+	I40E_PTT(36, IP, IPV4, NOF, IP_IP, IPV6, FRG, NONE, PAY3),
+	I40E_PTT(37, IP, IPV4, NOF, IP_IP, IPV6, NOF, NONE, PAY3),
+	I40E_PTT(38, IP, IPV4, NOF, IP_IP, IPV6, NOF, UDP,  PAY4),
+	I40E_PTT_UNUSED_ENTRY(39),
+	I40E_PTT(40, IP, IPV4, NOF, IP_IP, IPV6, NOF, TCP,  PAY4),
+	I40E_PTT(41, IP, IPV4, NOF, IP_IP, IPV6, NOF, SCTP, PAY4),
+	I40E_PTT(42, IP, IPV4, NOF, IP_IP, IPV6, NOF, ICMP, PAY4),
+
+	/* IPv4 --> GRE/NAT */
+	I40E_PTT(43, IP, IPV4, NOF, IP_GRENAT, NONE, NOF, NONE, PAY3),
+
+	/* IPv4 --> GRE/NAT --> IPv4 */
+	I40E_PTT(44, IP, IPV4, NOF, IP_GRENAT, IPV4, FRG, NONE, PAY3),
+	I40E_PTT(45, IP, IPV4, NOF, IP_GRENAT, IPV4, NOF, NONE, PAY3),
+	I40E_PTT(46, IP, IPV4, NOF, IP_GRENAT, IPV4, NOF, UDP,  PAY4),
+	I40E_PTT_UNUSED_ENTRY(47),
+	I40E_PTT(48, IP, IPV4, NOF, IP_GRENAT, IPV4, NOF, TCP,  PAY4),
+	I40E_PTT(49, IP, IPV4, NOF, IP_GRENAT, IPV4, NOF, SCTP, PAY4),
+	I40E_PTT(50, IP, IPV4, NOF, IP_GRENAT, IPV4, NOF, ICMP, PAY4),
+
+	/* IPv4 --> GRE/NAT --> IPv6 */
+	I40E_PTT(51, IP, IPV4, NOF, IP_GRENAT, IPV6, FRG, NONE, PAY3),
+	I40E_PTT(52, IP, IPV4, NOF, IP_GRENAT, IPV6, NOF, NONE, PAY3),
+	I40E_PTT(53, IP, IPV4, NOF, IP_GRENAT, IPV6, NOF, UDP,  PAY4),
+	I40E_PTT_UNUSED_ENTRY(54),
+	I40E_PTT(55, IP, IPV4, NOF, IP_GRENAT, IPV6, NOF, TCP,  PAY4),
+	I40E_PTT(56, IP, IPV4, NOF, IP_GRENAT, IPV6, NOF, SCTP, PAY4),
+	I40E_PTT(57, IP, IPV4, NOF, IP_GRENAT, IPV6, NOF, ICMP, PAY4),
+
+	/* IPv4 --> GRE/NAT --> MAC */
+	I40E_PTT(58, IP, IPV4, NOF, IP_GRENAT_MAC, NONE, NOF, NONE, PAY3),
+
+	/* IPv4 --> GRE/NAT --> MAC --> IPv4 */
+	I40E_PTT(59, IP, IPV4, NOF, IP_GRENAT_MAC, IPV4, FRG, NONE, PAY3),
+	I40E_PTT(60, IP, IPV4, NOF, IP_GRENAT_MAC, IPV4, NOF, NONE, PAY3),
+	I40E_PTT(61, IP, IPV4, NOF, IP_GRENAT_MAC, IPV4, NOF, UDP,  PAY4),
+	I40E_PTT_UNUSED_ENTRY(62),
+	I40E_PTT(63, IP, IPV4, NOF, IP_GRENAT_MAC, IPV4, NOF, TCP,  PAY4),
+	I40E_PTT(64, IP, IPV4, NOF, IP_GRENAT_MAC, IPV4, NOF, SCTP, PAY4),
+	I40E_PTT(65, IP, IPV4, NOF, IP_GRENAT_MAC, IPV4, NOF, ICMP, PAY4),
+
+	/* IPv4 --> GRE/NAT -> MAC --> IPv6 */
+	I40E_PTT(66, IP, IPV4, NOF, IP_GRENAT_MAC, IPV6, FRG, NONE, PAY3),
+	I40E_PTT(67, IP, IPV4, NOF, IP_GRENAT_MAC, IPV6, NOF, NONE, PAY3),
+	I40E_PTT(68, IP, IPV4, NOF, IP_GRENAT_MAC, IPV6, NOF, UDP,  PAY4),
+	I40E_PTT_UNUSED_ENTRY(69),
+	I40E_PTT(70, IP, IPV4, NOF, IP_GRENAT_MAC, IPV6, NOF, TCP,  PAY4),
+	I40E_PTT(71, IP, IPV4, NOF, IP_GRENAT_MAC, IPV6, NOF, SCTP, PAY4),
+	I40E_PTT(72, IP, IPV4, NOF, IP_GRENAT_MAC, IPV6, NOF, ICMP, PAY4),
+
+	/* IPv4 --> GRE/NAT --> MAC/VLAN */
+	I40E_PTT(73, IP, IPV4, NOF, IP_GRENAT_MAC_VLAN, NONE, NOF, NONE, PAY3),
+
+	/* IPv4 ---> GRE/NAT -> MAC/VLAN --> IPv4 */
+	I40E_PTT(74, IP, IPV4, NOF, IP_GRENAT_MAC_VLAN, IPV4, FRG, NONE, PAY3),
+	I40E_PTT(75, IP, IPV4, NOF, IP_GRENAT_MAC_VLAN, IPV4, NOF, NONE, PAY3),
+	I40E_PTT(76, IP, IPV4, NOF, IP_GRENAT_MAC_VLAN, IPV4, NOF, UDP,  PAY4),
+	I40E_PTT_UNUSED_ENTRY(77),
+	I40E_PTT(78, IP, IPV4, NOF, IP_GRENAT_MAC_VLAN, IPV4, NOF, TCP,  PAY4),
+	I40E_PTT(79, IP, IPV4, NOF, IP_GRENAT_MAC_VLAN, IPV4, NOF, SCTP, PAY4),
+	I40E_PTT(80, IP, IPV4, NOF, IP_GRENAT_MAC_VLAN, IPV4, NOF, ICMP, PAY4),
+
+	/* IPv4 -> GRE/NAT -> MAC/VLAN --> IPv6 */
+	I40E_PTT(81, IP, IPV4, NOF, IP_GRENAT_MAC_VLAN, IPV6, FRG, NONE, PAY3),
+	I40E_PTT(82, IP, IPV4, NOF, IP_GRENAT_MAC_VLAN, IPV6, NOF, NONE, PAY3),
+	I40E_PTT(83, IP, IPV4, NOF, IP_GRENAT_MAC_VLAN, IPV6, NOF, UDP,  PAY4),
+	I40E_PTT_UNUSED_ENTRY(84),
+	I40E_PTT(85, IP, IPV4, NOF, IP_GRENAT_MAC_VLAN, IPV6, NOF, TCP,  PAY4),
+	I40E_PTT(86, IP, IPV4, NOF, IP_GRENAT_MAC_VLAN, IPV6, NOF, SCTP, PAY4),
+	I40E_PTT(87, IP, IPV4, NOF, IP_GRENAT_MAC_VLAN, IPV6, NOF, ICMP, PAY4),
+
+	/* Non Tunneled IPv6 */
+	I40E_PTT(88, IP, IPV6, FRG, NONE, NONE, NOF, NONE, PAY3),
+	I40E_PTT(89, IP, IPV6, NOF, NONE, NONE, NOF, NONE, PAY3),
+	I40E_PTT(90, IP, IPV6, NOF, NONE, NONE, NOF, UDP,  PAY3),
+	I40E_PTT_UNUSED_ENTRY(91),
+	I40E_PTT(92, IP, IPV6, NOF, NONE, NONE, NOF, TCP,  PAY4),
+	I40E_PTT(93, IP, IPV6, NOF, NONE, NONE, NOF, SCTP, PAY4),
+	I40E_PTT(94, IP, IPV6, NOF, NONE, NONE, NOF, ICMP, PAY4),
+
+	/* IPv6 --> IPv4 */
+	I40E_PTT(95,  IP, IPV6, NOF, IP_IP, IPV4, FRG, NONE, PAY3),
+	I40E_PTT(96,  IP, IPV6, NOF, IP_IP, IPV4, NOF, NONE, PAY3),
+	I40E_PTT(97,  IP, IPV6, NOF, IP_IP, IPV4, NOF, UDP,  PAY4),
+	I40E_PTT_UNUSED_ENTRY(98),
+	I40E_PTT(99,  IP, IPV6, NOF, IP_IP, IPV4, NOF, TCP,  PAY4),
+	I40E_PTT(100, IP, IPV6, NOF, IP_IP, IPV4, NOF, SCTP, PAY4),
+	I40E_PTT(101, IP, IPV6, NOF, IP_IP, IPV4, NOF, ICMP, PAY4),
+
+	/* IPv6 --> IPv6 */
+	I40E_PTT(102, IP, IPV6, NOF, IP_IP, IPV6, FRG, NONE, PAY3),
+	I40E_PTT(103, IP, IPV6, NOF, IP_IP, IPV6, NOF, NONE, PAY3),
+	I40E_PTT(104, IP, IPV6, NOF, IP_IP, IPV6, NOF, UDP,  PAY4),
+	I40E_PTT_UNUSED_ENTRY(105),
+	I40E_PTT(106, IP, IPV6, NOF, IP_IP, IPV6, NOF, TCP,  PAY4),
+	I40E_PTT(107, IP, IPV6, NOF, IP_IP, IPV6, NOF, SCTP, PAY4),
+	I40E_PTT(108, IP, IPV6, NOF, IP_IP, IPV6, NOF, ICMP, PAY4),
+
+	/* IPv6 --> GRE/NAT */
+	I40E_PTT(109, IP, IPV6, NOF, IP_GRENAT, NONE, NOF, NONE, PAY3),
+
+	/* IPv6 --> GRE/NAT -> IPv4 */
+	I40E_PTT(110, IP, IPV6, NOF, IP_GRENAT, IPV4, FRG, NONE, PAY3),
+	I40E_PTT(111, IP, IPV6, NOF, IP_GRENAT, IPV4, NOF, NONE, PAY3),
+	I40E_PTT(112, IP, IPV6, NOF, IP_GRENAT, IPV4, NOF, UDP,  PAY4),
+	I40E_PTT_UNUSED_ENTRY(113),
+	I40E_PTT(114, IP, IPV6, NOF, IP_GRENAT, IPV4, NOF, TCP,  PAY4),
+	I40E_PTT(115, IP, IPV6, NOF, IP_GRENAT, IPV4, NOF, SCTP, PAY4),
+	I40E_PTT(116, IP, IPV6, NOF, IP_GRENAT, IPV4, NOF, ICMP, PAY4),
+
+	/* IPv6 --> GRE/NAT -> IPv6 */
+	I40E_PTT(117, IP, IPV6, NOF, IP_GRENAT, IPV6, FRG, NONE, PAY3),
+	I40E_PTT(118, IP, IPV6, NOF, IP_GRENAT, IPV6, NOF, NONE, PAY3),
+	I40E_PTT(119, IP, IPV6, NOF, IP_GRENAT, IPV6, NOF, UDP,  PAY4),
+	I40E_PTT_UNUSED_ENTRY(120),
+	I40E_PTT(121, IP, IPV6, NOF, IP_GRENAT, IPV6, NOF, TCP,  PAY4),
+	I40E_PTT(122, IP, IPV6, NOF, IP_GRENAT, IPV6, NOF, SCTP, PAY4),
+	I40E_PTT(123, IP, IPV6, NOF, IP_GRENAT, IPV6, NOF, ICMP, PAY4),
+
+	/* IPv6 --> GRE/NAT -> MAC */
+	I40E_PTT(124, IP, IPV6, NOF, IP_GRENAT_MAC, NONE, NOF, NONE, PAY3),
+
+	/* IPv6 --> GRE/NAT -> MAC -> IPv4 */
+	I40E_PTT(125, IP, IPV6, NOF, IP_GRENAT_MAC, IPV4, FRG, NONE, PAY3),
+	I40E_PTT(126, IP, IPV6, NOF, IP_GRENAT_MAC, IPV4, NOF, NONE, PAY3),
+	I40E_PTT(127, IP, IPV6, NOF, IP_GRENAT_MAC, IPV4, NOF, UDP,  PAY4),
+	I40E_PTT_UNUSED_ENTRY(128),
+	I40E_PTT(129, IP, IPV6, NOF, IP_GRENAT_MAC, IPV4, NOF, TCP,  PAY4),
+	I40E_PTT(130, IP, IPV6, NOF, IP_GRENAT_MAC, IPV4, NOF, SCTP, PAY4),
+	I40E_PTT(131, IP, IPV6, NOF, IP_GRENAT_MAC, IPV4, NOF, ICMP, PAY4),
+
+	/* IPv6 --> GRE/NAT -> MAC -> IPv6 */
+	I40E_PTT(132, IP, IPV6, NOF, IP_GRENAT_MAC, IPV6, FRG, NONE, PAY3),
+	I40E_PTT(133, IP, IPV6, NOF, IP_GRENAT_MAC, IPV6, NOF, NONE, PAY3),
+	I40E_PTT(134, IP, IPV6, NOF, IP_GRENAT_MAC, IPV6, NOF, UDP,  PAY4),
+	I40E_PTT_UNUSED_ENTRY(135),
+	I40E_PTT(136, IP, IPV6, NOF, IP_GRENAT_MAC, IPV6, NOF, TCP,  PAY4),
+	I40E_PTT(137, IP, IPV6, NOF, IP_GRENAT_MAC, IPV6, NOF, SCTP, PAY4),
+	I40E_PTT(138, IP, IPV6, NOF, IP_GRENAT_MAC, IPV6, NOF, ICMP, PAY4),
+
+	/* IPv6 --> GRE/NAT -> MAC/VLAN */
+	I40E_PTT(139, IP, IPV6, NOF, IP_GRENAT_MAC_VLAN, NONE, NOF, NONE, PAY3),
+
+	/* IPv6 --> GRE/NAT -> MAC/VLAN --> IPv4 */
+	I40E_PTT(140, IP, IPV6, NOF, IP_GRENAT_MAC_VLAN, IPV4, FRG, NONE, PAY3),
+	I40E_PTT(141, IP, IPV6, NOF, IP_GRENAT_MAC_VLAN, IPV4, NOF, NONE, PAY3),
+	I40E_PTT(142, IP, IPV6, NOF, IP_GRENAT_MAC_VLAN, IPV4, NOF, UDP,  PAY4),
+	I40E_PTT_UNUSED_ENTRY(143),
+	I40E_PTT(144, IP, IPV6, NOF, IP_GRENAT_MAC_VLAN, IPV4, NOF, TCP,  PAY4),
+	I40E_PTT(145, IP, IPV6, NOF, IP_GRENAT_MAC_VLAN, IPV4, NOF, SCTP, PAY4),
+	I40E_PTT(146, IP, IPV6, NOF, IP_GRENAT_MAC_VLAN, IPV4, NOF, ICMP, PAY4),
+
+	/* IPv6 --> GRE/NAT -> MAC/VLAN --> IPv6 */
+	I40E_PTT(147, IP, IPV6, NOF, IP_GRENAT_MAC_VLAN, IPV6, FRG, NONE, PAY3),
+	I40E_PTT(148, IP, IPV6, NOF, IP_GRENAT_MAC_VLAN, IPV6, NOF, NONE, PAY3),
+	I40E_PTT(149, IP, IPV6, NOF, IP_GRENAT_MAC_VLAN, IPV6, NOF, UDP,  PAY4),
+	I40E_PTT_UNUSED_ENTRY(150),
+	I40E_PTT(151, IP, IPV6, NOF, IP_GRENAT_MAC_VLAN, IPV6, NOF, TCP,  PAY4),
+	I40E_PTT(152, IP, IPV6, NOF, IP_GRENAT_MAC_VLAN, IPV6, NOF, SCTP, PAY4),
+	I40E_PTT(153, IP, IPV6, NOF, IP_GRENAT_MAC_VLAN, IPV6, NOF, ICMP, PAY4),
+
+	/* unused entries */
+	I40E_PTT_UNUSED_ENTRY(154),
+	I40E_PTT_UNUSED_ENTRY(155),
+	I40E_PTT_UNUSED_ENTRY(156),
+	I40E_PTT_UNUSED_ENTRY(157),
+	I40E_PTT_UNUSED_ENTRY(158),
+	I40E_PTT_UNUSED_ENTRY(159),
+
+	I40E_PTT_UNUSED_ENTRY(160),
+	I40E_PTT_UNUSED_ENTRY(161),
+	I40E_PTT_UNUSED_ENTRY(162),
+	I40E_PTT_UNUSED_ENTRY(163),
+	I40E_PTT_UNUSED_ENTRY(164),
+	I40E_PTT_UNUSED_ENTRY(165),
+	I40E_PTT_UNUSED_ENTRY(166),
+	I40E_PTT_UNUSED_ENTRY(167),
+	I40E_PTT_UNUSED_ENTRY(168),
+	I40E_PTT_UNUSED_ENTRY(169),
+
+	I40E_PTT_UNUSED_ENTRY(170),
+	I40E_PTT_UNUSED_ENTRY(171),
+	I40E_PTT_UNUSED_ENTRY(172),
+	I40E_PTT_UNUSED_ENTRY(173),
+	I40E_PTT_UNUSED_ENTRY(174),
+	I40E_PTT_UNUSED_ENTRY(175),
+	I40E_PTT_UNUSED_ENTRY(176),
+	I40E_PTT_UNUSED_ENTRY(177),
+	I40E_PTT_UNUSED_ENTRY(178),
+	I40E_PTT_UNUSED_ENTRY(179),
+
+	I40E_PTT_UNUSED_ENTRY(180),
+	I40E_PTT_UNUSED_ENTRY(181),
+	I40E_PTT_UNUSED_ENTRY(182),
+	I40E_PTT_UNUSED_ENTRY(183),
+	I40E_PTT_UNUSED_ENTRY(184),
+	I40E_PTT_UNUSED_ENTRY(185),
+	I40E_PTT_UNUSED_ENTRY(186),
+	I40E_PTT_UNUSED_ENTRY(187),
+	I40E_PTT_UNUSED_ENTRY(188),
+	I40E_PTT_UNUSED_ENTRY(189),
+
+	I40E_PTT_UNUSED_ENTRY(190),
+	I40E_PTT_UNUSED_ENTRY(191),
+	I40E_PTT_UNUSED_ENTRY(192),
+	I40E_PTT_UNUSED_ENTRY(193),
+	I40E_PTT_UNUSED_ENTRY(194),
+	I40E_PTT_UNUSED_ENTRY(195),
+	I40E_PTT_UNUSED_ENTRY(196),
+	I40E_PTT_UNUSED_ENTRY(197),
+	I40E_PTT_UNUSED_ENTRY(198),
+	I40E_PTT_UNUSED_ENTRY(199),
+
+	I40E_PTT_UNUSED_ENTRY(200),
+	I40E_PTT_UNUSED_ENTRY(201),
+	I40E_PTT_UNUSED_ENTRY(202),
+	I40E_PTT_UNUSED_ENTRY(203),
+	I40E_PTT_UNUSED_ENTRY(204),
+	I40E_PTT_UNUSED_ENTRY(205),
+	I40E_PTT_UNUSED_ENTRY(206),
+	I40E_PTT_UNUSED_ENTRY(207),
+	I40E_PTT_UNUSED_ENTRY(208),
+	I40E_PTT_UNUSED_ENTRY(209),
+
+	I40E_PTT_UNUSED_ENTRY(210),
+	I40E_PTT_UNUSED_ENTRY(211),
+	I40E_PTT_UNUSED_ENTRY(212),
+	I40E_PTT_UNUSED_ENTRY(213),
+	I40E_PTT_UNUSED_ENTRY(214),
+	I40E_PTT_UNUSED_ENTRY(215),
+	I40E_PTT_UNUSED_ENTRY(216),
+	I40E_PTT_UNUSED_ENTRY(217),
+	I40E_PTT_UNUSED_ENTRY(218),
+	I40E_PTT_UNUSED_ENTRY(219),
+
+	I40E_PTT_UNUSED_ENTRY(220),
+	I40E_PTT_UNUSED_ENTRY(221),
+	I40E_PTT_UNUSED_ENTRY(222),
+	I40E_PTT_UNUSED_ENTRY(223),
+	I40E_PTT_UNUSED_ENTRY(224),
+	I40E_PTT_UNUSED_ENTRY(225),
+	I40E_PTT_UNUSED_ENTRY(226),
+	I40E_PTT_UNUSED_ENTRY(227),
+	I40E_PTT_UNUSED_ENTRY(228),
+	I40E_PTT_UNUSED_ENTRY(229),
+
+	I40E_PTT_UNUSED_ENTRY(230),
+	I40E_PTT_UNUSED_ENTRY(231),
+	I40E_PTT_UNUSED_ENTRY(232),
+	I40E_PTT_UNUSED_ENTRY(233),
+	I40E_PTT_UNUSED_ENTRY(234),
+	I40E_PTT_UNUSED_ENTRY(235),
+	I40E_PTT_UNUSED_ENTRY(236),
+	I40E_PTT_UNUSED_ENTRY(237),
+	I40E_PTT_UNUSED_ENTRY(238),
+	I40E_PTT_UNUSED_ENTRY(239),
+
+	I40E_PTT_UNUSED_ENTRY(240),
+	I40E_PTT_UNUSED_ENTRY(241),
+	I40E_PTT_UNUSED_ENTRY(242),
+	I40E_PTT_UNUSED_ENTRY(243),
+	I40E_PTT_UNUSED_ENTRY(244),
+	I40E_PTT_UNUSED_ENTRY(245),
+	I40E_PTT_UNUSED_ENTRY(246),
+	I40E_PTT_UNUSED_ENTRY(247),
+	I40E_PTT_UNUSED_ENTRY(248),
+	I40E_PTT_UNUSED_ENTRY(249),
+
+	I40E_PTT_UNUSED_ENTRY(250),
+	I40E_PTT_UNUSED_ENTRY(251),
+	I40E_PTT_UNUSED_ENTRY(252),
+	I40E_PTT_UNUSED_ENTRY(253),
+	I40E_PTT_UNUSED_ENTRY(254),
+	I40E_PTT_UNUSED_ENTRY(255)
+};
+
+
 /**
  * i40e_aq_send_msg_to_pf
  * @hw: pointer to the hardware structure
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_prototype.h b/drivers/net/ethernet/intel/i40evf/i40e_prototype.h
index 7841573a58c9..33c99051cc96 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_prototype.h
+++ b/drivers/net/ethernet/intel/i40evf/i40e_prototype.h
@@ -63,6 +63,13 @@ i40e_status i40evf_aq_queue_shutdown(struct i40e_hw *hw,
 
 i40e_status i40e_set_mac_type(struct i40e_hw *hw);
 
+extern struct i40e_rx_ptype_decoded i40e_ptype_lookup[];
+
+static inline struct i40e_rx_ptype_decoded decode_rx_desc_ptype(u8 ptype)
+{
+	return  i40e_ptype_lookup[ptype];
+}
+
 /* prototype for functions used for SW locks */
 
 /* i40e_common for VF drivers*/
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
index 827bb5fa4af9..01bfab729b01 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
@@ -24,6 +24,7 @@
 #include <linux/prefetch.h>
 
 #include "i40evf.h"
+#include "i40e_prototype.h"
 
 static inline __le64 build_ctob(u32 td_cmd, u32 td_offset, unsigned int size,
 				u32 td_tag)
@@ -785,6 +786,29 @@ static inline u32 i40e_rx_hash(struct i40e_ring *ring,
 		return 0;
 }
 
+/**
+ * i40e_ptype_to_hash - get a hash type
+ * @ptype: the ptype value from the descriptor
+ *
+ * Returns a hash type to be used by skb_set_hash
+ **/
+static inline enum pkt_hash_types i40e_ptype_to_hash(u8 ptype)
+{
+	struct i40e_rx_ptype_decoded decoded = decode_rx_desc_ptype(ptype);
+
+	if (!decoded.known)
+		return PKT_HASH_TYPE_NONE;
+
+	if (decoded.outer_ip == I40E_RX_PTYPE_OUTER_IP &&
+	    decoded.payload_layer == I40E_RX_PTYPE_PAYLOAD_LAYER_PAY4)
+		return PKT_HASH_TYPE_L4;
+	else if (decoded.outer_ip == I40E_RX_PTYPE_OUTER_IP &&
+		 decoded.payload_layer == I40E_RX_PTYPE_PAYLOAD_LAYER_PAY3)
+		return PKT_HASH_TYPE_L3;
+	else
+		return PKT_HASH_TYPE_L2;
+}
+
 /**
  * i40e_clean_rx_irq - Reclaim resources after receive completes
  * @rx_ring:  rx ring to clean
@@ -802,8 +826,8 @@ static int i40e_clean_rx_irq(struct i40e_ring *rx_ring, int budget)
 	u16 i = rx_ring->next_to_clean;
 	union i40e_rx_desc *rx_desc;
 	u32 rx_error, rx_status;
+	u8 rx_ptype;
 	u64 qword;
-	u16 rx_ptype;
 
 	rx_desc = I40E_RX_DESC(rx_ring, i);
 	qword = le64_to_cpu(rx_desc->wb.qword1.status_error_len);
@@ -912,7 +936,8 @@ static int i40e_clean_rx_irq(struct i40e_ring *rx_ring, int budget)
 			goto next_desc;
 		}
 
-		skb->rxhash = i40e_rx_hash(rx_ring, rx_desc);
+		skb_set_hash(skb, i40e_rx_hash(rx_ring, rx_desc),
+			     i40e_ptype_to_hash(rx_ptype));
 		/* probably a little skewed due to removing CRC */
 		total_rx_bytes += skb->len;
 		total_rx_packets++;
-- 
cgit v1.2.2


From 3e26186d4c2f856cf60b9c22863ab0080afbdc66 Mon Sep 17 00:00:00 2001
From: Shannon Nelson <shannon.nelson@intel.com>
Date: Thu, 6 Feb 2014 05:51:06 +0000
Subject: i40e: clean up comment style

Lots of trivial changes to remove double spaces in function headers,
unnecessary periods in short comments, and adjust the English usage here
and there.

No actual code was harmed in the making of this patch.

Change-ID: I6e756c500756945e81a61ffb10221753eb7923ea
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Kevin Scott <kevin.c.scott@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_nvm.c | 117 ++++++++++++++---------------
 1 file changed, 58 insertions(+), 59 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_nvm.c b/drivers/net/ethernet/intel/i40e/i40e_nvm.c
index 73f95b081927..262bdf11d221 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_nvm.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_nvm.c
@@ -27,14 +27,14 @@
 #include "i40e_prototype.h"
 
 /**
- *  i40e_init_nvm_ops - Initialize NVM function pointers.
- *  @hw: pointer to the HW structure.
+ * i40e_init_nvm_ops - Initialize NVM function pointers
+ * @hw: pointer to the HW structure
  *
- *  Setups the function pointers and the NVM info structure. Should be called
- *  once per NVM initialization, e.g. inside the i40e_init_shared_code().
- *  Please notice that the NVM term is used here (& in all methods covered
- *  in this file) as an equivalent of the FLASH part mapped into the SR.
- *  We are accessing FLASH always thru the Shadow RAM.
+ * Setup the function pointers and the NVM info structure. Should be called
+ * once per NVM initialization, e.g. inside the i40e_init_shared_code().
+ * Please notice that the NVM term is used here (& in all methods covered
+ * in this file) as an equivalent of the FLASH part mapped into the SR.
+ * We are accessing FLASH always thru the Shadow RAM.
  **/
 i40e_status i40e_init_nvm(struct i40e_hw *hw)
 {
@@ -49,16 +49,16 @@ i40e_status i40e_init_nvm(struct i40e_hw *hw)
 	gens = rd32(hw, I40E_GLNVM_GENS);
 	sr_size = ((gens & I40E_GLNVM_GENS_SR_SIZE_MASK) >>
 			   I40E_GLNVM_GENS_SR_SIZE_SHIFT);
-	/* Switching to words (sr_size contains power of 2KB). */
+	/* Switching to words (sr_size contains power of 2KB) */
 	nvm->sr_size = (1 << sr_size) * I40E_SR_WORDS_IN_1KB;
 
-	/* Check if we are in the normal or blank NVM programming mode. */
+	/* Check if we are in the normal or blank NVM programming mode */
 	fla = rd32(hw, I40E_GLNVM_FLA);
-	if (fla & I40E_GLNVM_FLA_LOCKED_MASK) { /* Normal programming mode. */
-		/* Max NVM timeout. */
+	if (fla & I40E_GLNVM_FLA_LOCKED_MASK) { /* Normal programming mode */
+		/* Max NVM timeout */
 		nvm->timeout = I40E_MAX_NVM_TIMEOUT;
 		nvm->blank_nvm_mode = false;
-	} else { /* Blank programming mode. */
+	} else { /* Blank programming mode */
 		nvm->blank_nvm_mode = true;
 		ret_code = I40E_ERR_NVM_BLANK_MODE;
 		hw_dbg(hw, "NVM init error: unsupported blank mode.\n");
@@ -68,12 +68,12 @@ i40e_status i40e_init_nvm(struct i40e_hw *hw)
 }
 
 /**
- *  i40e_acquire_nvm - Generic request for acquiring the NVM ownership.
- *  @hw: pointer to the HW structure.
- *  @access: NVM access type (read or write).
+ * i40e_acquire_nvm - Generic request for acquiring the NVM ownership
+ * @hw: pointer to the HW structure
+ * @access: NVM access type (read or write)
  *
- *  This function will request NVM ownership for reading
- *  via the proper Admin Command.
+ * This function will request NVM ownership for reading
+ * via the proper Admin Command.
  **/
 i40e_status i40e_acquire_nvm(struct i40e_hw *hw,
 				       enum i40e_aq_resource_access_type access)
@@ -87,20 +87,20 @@ i40e_status i40e_acquire_nvm(struct i40e_hw *hw,
 
 	ret_code = i40e_aq_request_resource(hw, I40E_NVM_RESOURCE_ID, access,
 					    0, &time, NULL);
-	/* Reading the Global Device Timer. */
+	/* Reading the Global Device Timer */
 	gtime = rd32(hw, I40E_GLVFGEN_TIMER);
 
-	/* Store the timeout. */
+	/* Store the timeout */
 	hw->nvm.hw_semaphore_timeout = I40E_MS_TO_GTIME(time) + gtime;
 
 	if (ret_code) {
-		/* Set the polling timeout. */
+		/* Set the polling timeout */
 		if (time > I40E_MAX_NVM_TIMEOUT)
 			timeout = I40E_MS_TO_GTIME(I40E_MAX_NVM_TIMEOUT)
 				  + gtime;
 		else
 			timeout = hw->nvm.hw_semaphore_timeout;
-		/* Poll until the current NVM owner timeouts. */
+		/* Poll until the current NVM owner timeouts */
 		while (gtime < timeout) {
 			usleep_range(10000, 20000);
 			ret_code = i40e_aq_request_resource(hw,
@@ -128,10 +128,10 @@ i40e_i40e_acquire_nvm_exit:
 }
 
 /**
- *  i40e_release_nvm - Generic request for releasing the NVM ownership.
- *  @hw: pointer to the HW structure.
+ * i40e_release_nvm - Generic request for releasing the NVM ownership
+ * @hw: pointer to the HW structure
  *
- *  This function will release NVM resource via the proper Admin Command.
+ * This function will release NVM resource via the proper Admin Command.
  **/
 void i40e_release_nvm(struct i40e_hw *hw)
 {
@@ -140,17 +140,17 @@ void i40e_release_nvm(struct i40e_hw *hw)
 }
 
 /**
- *  i40e_poll_sr_srctl_done_bit - Polls the GLNVM_SRCTL done bit.
- *  @hw: pointer to the HW structure.
+ * i40e_poll_sr_srctl_done_bit - Polls the GLNVM_SRCTL done bit
+ * @hw: pointer to the HW structure
  *
- *  Polls the SRCTL Shadow RAM register done bit.
+ * Polls the SRCTL Shadow RAM register done bit.
  **/
 static i40e_status i40e_poll_sr_srctl_done_bit(struct i40e_hw *hw)
 {
 	i40e_status ret_code = I40E_ERR_TIMEOUT;
 	u32 srctl, wait_cnt;
 
-	/* Poll the I40E_GLNVM_SRCTL until the done bit is set. */
+	/* Poll the I40E_GLNVM_SRCTL until the done bit is set */
 	for (wait_cnt = 0; wait_cnt < I40E_SRRD_SRCTL_ATTEMPTS; wait_cnt++) {
 		srctl = rd32(hw, I40E_GLNVM_SRCTL);
 		if (srctl & I40E_GLNVM_SRCTL_DONE_MASK) {
@@ -165,12 +165,12 @@ static i40e_status i40e_poll_sr_srctl_done_bit(struct i40e_hw *hw)
 }
 
 /**
- *  i40e_read_nvm_word - Reads Shadow RAM
- *  @hw: pointer to the HW structure.
- *  @offset: offset of the Shadow RAM word to read (0x000000 - 0x001FFF).
- *  @data: word read from the Shadow RAM.
+ * i40e_read_nvm_word - Reads Shadow RAM
+ * @hw: pointer to the HW structure
+ * @offset: offset of the Shadow RAM word to read (0x000000 - 0x001FFF)
+ * @data: word read from the Shadow RAM
  *
- *  Reads 16 bit word from the Shadow RAM using the GLNVM_SRCTL register.
+ * Reads one 16 bit word from the Shadow RAM using the GLNVM_SRCTL register.
  **/
 i40e_status i40e_read_nvm_word(struct i40e_hw *hw, u16 offset,
 					 u16 *data)
@@ -184,15 +184,15 @@ i40e_status i40e_read_nvm_word(struct i40e_hw *hw, u16 offset,
 		goto read_nvm_exit;
 	}
 
-	/* Poll the done bit first. */
+	/* Poll the done bit first */
 	ret_code = i40e_poll_sr_srctl_done_bit(hw);
 	if (!ret_code) {
-		/* Write the address and start reading. */
+		/* Write the address and start reading */
 		sr_reg = (u32)(offset << I40E_GLNVM_SRCTL_ADDR_SHIFT) |
 			 (1 << I40E_GLNVM_SRCTL_START_SHIFT);
 		wr32(hw, I40E_GLNVM_SRCTL, sr_reg);
 
-		/* Poll I40E_GLNVM_SRCTL until the done bit is set. */
+		/* Poll I40E_GLNVM_SRCTL until the done bit is set */
 		ret_code = i40e_poll_sr_srctl_done_bit(hw);
 		if (!ret_code) {
 			sr_reg = rd32(hw, I40E_GLNVM_SRDATA);
@@ -210,16 +210,15 @@ read_nvm_exit:
 }
 
 /**
- *  i40e_read_nvm_buffer - Reads Shadow RAM buffer.
- *  @hw: pointer to the HW structure.
- *  @offset: offset of the Shadow RAM word to read (0x000000 - 0x001FFF).
- *  @words: number of words to read (in) &
- *          number of words read before the NVM ownership timeout (out).
- *  @data: words read from the Shadow RAM.
+ * i40e_read_nvm_buffer - Reads Shadow RAM buffer
+ * @hw: pointer to the HW structure
+ * @offset: offset of the Shadow RAM word to read (0x000000 - 0x001FFF).
+ * @words: (in) number of words to read; (out) number of words actually read
+ * @data: words read from the Shadow RAM
  *
- *  Reads 16 bit words (data buffer) from the SR using the i40e_read_nvm_srrd()
- *  method. The buffer read is preceded by the NVM ownership take
- *  and followed by the release.
+ * Reads 16 bit words (data buffer) from the SR using the i40e_read_nvm_srrd()
+ * method. The buffer read is preceded by the NVM ownership take
+ * and followed by the release.
  **/
 i40e_status i40e_read_nvm_buffer(struct i40e_hw *hw, u16 offset,
 					   u16 *words, u16 *data)
@@ -227,7 +226,7 @@ i40e_status i40e_read_nvm_buffer(struct i40e_hw *hw, u16 offset,
 	i40e_status ret_code = 0;
 	u16 index, word;
 
-	/* Loop thru the selected region. */
+	/* Loop thru the selected region */
 	for (word = 0; word < *words; word++) {
 		index = offset + word;
 		ret_code = i40e_read_nvm_word(hw, index, &data[word]);
@@ -235,21 +234,21 @@ i40e_status i40e_read_nvm_buffer(struct i40e_hw *hw, u16 offset,
 			break;
 	}
 
-	/* Update the number of words read from the Shadow RAM. */
+	/* Update the number of words read from the Shadow RAM */
 	*words = word;
 
 	return ret_code;
 }
 
 /**
- *  i40e_calc_nvm_checksum - Calculates and returns the checksum
- *  @hw: pointer to hardware structure
- *  @checksum: pointer to the checksum
+ * i40e_calc_nvm_checksum - Calculates and returns the checksum
+ * @hw: pointer to hardware structure
+ * @checksum: pointer to the checksum
  *
- *  This function calculate SW Checksum that covers the whole 64kB shadow RAM
- *  except the VPD and PCIe ALT Auto-load modules. The structure and size of VPD
- *  is customer specific and unknown. Therefore, this function skips all maximum
- *  possible size of VPD (1kB).
+ * This function calculates SW Checksum that covers the whole 64kB shadow RAM
+ * except the VPD and PCIe ALT Auto-load modules. The structure and size of VPD
+ * is customer specific and unknown. Therefore, this function skips all maximum
+ * possible size of VPD (1kB).
  **/
 static i40e_status i40e_calc_nvm_checksum(struct i40e_hw *hw,
 						    u16 *checksum)
@@ -311,12 +310,12 @@ i40e_calc_nvm_checksum_exit:
 }
 
 /**
- *  i40e_validate_nvm_checksum - Validate EEPROM checksum
- *  @hw: pointer to hardware structure
- *  @checksum: calculated checksum
+ * i40e_validate_nvm_checksum - Validate EEPROM checksum
+ * @hw: pointer to hardware structure
+ * @checksum: calculated checksum
  *
- *  Performs checksum calculation and validates the NVM SW checksum. If the
- *  caller does not need checksum, the value can be NULL.
+ * Performs checksum calculation and validates the NVM SW checksum. If the
+ * caller does not need checksum, the value can be NULL.
  **/
 i40e_status i40e_validate_nvm_checksum(struct i40e_hw *hw,
 						 u16 *checksum)
-- 
cgit v1.2.2


From ac71b7ba18ec5353fd905a2f9c4b173a15b2f925 Mon Sep 17 00:00:00 2001
From: Anjali Singhai Jain <anjali.singhai@intel.com>
Date: Thu, 6 Feb 2014 05:51:08 +0000
Subject: i40e: Remove a FW workaround for Number of MSIX vectors

The Number of MSIX vectors being reported is correct and hence
we need a check to do the right thing for FWs before and after.

Change-ID: I50902d1c848adcb960ea49ac73f7865ca871a1c3
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index fa296b8098f9..46b350753f4e 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -5093,6 +5093,12 @@ static int i40e_get_capabilities(struct i40e_pf *pf)
 	/* increment MSI-X count because current FW skips one */
 	pf->hw.func_caps.num_msix_vectors++;
 
+	if (((pf->hw.aq.fw_maj_ver == 2) && (pf->hw.aq.fw_min_ver < 22)) ||
+	    (pf->hw.aq.fw_maj_ver < 2)) {
+		pf->hw.func_caps.num_msix_vectors++;
+		pf->hw.func_caps.num_msix_vectors_vf++;
+	}
+
 	if (pf->hw.debug_mask & I40E_DEBUG_USER)
 		dev_info(&pf->pdev->dev,
 			 "pf=%d, num_vfs=%d, msix_pf=%d, msix_vf=%d, fd_g=%d, fd_b=%d, pf_max_q=%d num_vsi=%d\n",
-- 
cgit v1.2.2


From a47a15f497cac2c94eb88f4eb11929564ea856d3 Mon Sep 17 00:00:00 2001
From: Jesse Brandeburg <jesse.brandeburg@intel.com>
Date: Thu, 6 Feb 2014 05:51:09 +0000
Subject: i40e: count timeout events

The ethtool -S statistics should have a counter for
tx timeouts in order to better help inform the masses.

Change-ID: Ice4b20ed4a151509f366719ab105be49c9e7b2b4
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index 8d46c6ee4cdd..d34ff31fddd8 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -87,6 +87,7 @@ static struct i40e_stats i40e_gstrings_stats[] = {
 	I40E_PF_STAT("illegal_bytes", stats.illegal_bytes),
 	I40E_PF_STAT("mac_local_faults", stats.mac_local_faults),
 	I40E_PF_STAT("mac_remote_faults", stats.mac_remote_faults),
+	I40E_PF_STAT("tx_timeout", tx_timeout_count),
 	I40E_PF_STAT("rx_length_errors", stats.rx_length_errors),
 	I40E_PF_STAT("link_xon_rx", stats.link_xon_rx),
 	I40E_PF_STAT("link_xoff_rx", stats.link_xoff_rx),
-- 
cgit v1.2.2


From 6982d429a9194e5069c5249e751422def87658a6 Mon Sep 17 00:00:00 2001
From: Anjali Singhai Jain <anjali.singhai@intel.com>
Date: Thu, 6 Feb 2014 05:51:10 +0000
Subject: i40e: Remove a redundant filter addition

Remove a redundant filter addition to stop FW complaints about a redundant
filter removal.

Change-ID: I22bef6b682bd8d43432557e6e2b3e73ffb27b985
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 46b350753f4e..50d003258ff1 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -1965,11 +1965,14 @@ static int i40e_vlan_rx_add_vid(struct net_device *netdev,
 
 	netdev_info(netdev, "adding %pM vid=%d\n", netdev->dev_addr, vid);
 
-	/* If the network stack called us with vid = 0, we should
-	 * indicate to i40e_vsi_add_vlan() that we want to receive
-	 * any traffic (i.e. with any vlan tag, or untagged)
+	/* If the network stack called us with vid = 0 then
+	 * it is asking to receive priority tagged packets with
+	 * vlan id 0.  Our HW receives them by default when configured
+	 * to receive untagged packets so there is no need to add an
+	 * extra filter for vlan 0 tagged packets.
 	 */
-	ret = i40e_vsi_add_vlan(vsi, vid ? vid : I40E_VLAN_ANY);
+	if (vid)
+		ret = i40e_vsi_add_vlan(vsi, vid);
 
 	if (!ret && (vid < VLAN_N_VID))
 		set_bit(vid, vsi->active_vlans);
-- 
cgit v1.2.2


From 71f6a85a5881b30ba80d3dac5173f1a6c55c8ccf Mon Sep 17 00:00:00 2001
From: Neerav Parikh <Neerav.Parikh@intel.com>
Date: Thu, 6 Feb 2014 05:51:11 +0000
Subject: i40e: Fix static checker warning

This patch fixes the following static checker warning:

  drivers/net/ethernet/intel/i40e/i40e_dcb.c:342
  i40e_lldp_to_dcb_config() warn: 'tlv' can't be NULL.

Exit criteria from the while loop is encountering LLDP END
LV or if the TLV length goes beyond the buffer length.

Change-ID: I7548b16db90230ec2ba0fa791b0343ca8b7dd5bb
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Neerav Parikh <Neerav.Parikh@intel.com>
Acked-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Kevin Scott <kevin.c.scott@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Tested-By: Jack Morgan<jack.morgan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_dcb.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_dcb.c b/drivers/net/ethernet/intel/i40e/i40e_dcb.c
index 50730141bb7b..036570d76176 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_dcb.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_dcb.c
@@ -332,6 +332,7 @@ i40e_status i40e_lldp_to_dcb_config(u8 *lldpmib,
 	u16 type;
 	u16 length;
 	u16 typelength;
+	u16 offset = 0;
 
 	if (!lldpmib || !dcbcfg)
 		return I40E_ERR_PARAM;
@@ -339,15 +340,17 @@ i40e_status i40e_lldp_to_dcb_config(u8 *lldpmib,
 	/* set to the start of LLDPDU */
 	lldpmib += ETH_HLEN;
 	tlv = (struct i40e_lldp_org_tlv *)lldpmib;
-	while (tlv) {
+	while (1) {
 		typelength = ntohs(tlv->typelength);
 		type = (u16)((typelength & I40E_LLDP_TLV_TYPE_MASK) >>
 			     I40E_LLDP_TLV_TYPE_SHIFT);
 		length = (u16)((typelength & I40E_LLDP_TLV_LEN_MASK) >>
 			       I40E_LLDP_TLV_LEN_SHIFT);
+		offset += sizeof(typelength) + length;
 
-		if (type == I40E_TLV_TYPE_END)
-			break;/* END TLV break out */
+		/* END TLV or beyond LLDPDU size */
+		if ((type == I40E_TLV_TYPE_END) || (offset > I40E_LLDPDU_SIZE))
+			break;
 
 		switch (type) {
 		case I40E_TLV_TYPE_ORG:
-- 
cgit v1.2.2


From ff80301efad4818938470326b9879bb960f5e66c Mon Sep 17 00:00:00 2001
From: Jesse Brandeburg <jesse.brandeburg@intel.com>
Date: Thu, 6 Feb 2014 05:51:12 +0000
Subject: i40e: fix nvm version and remove firmware report

The driver needs to use the format that the current NVM
uses when printing the version of the NVM.  It should remain
this way from now on forward.

The driver was reporting when firmware was less than
an expected version number, but this is not a requirement
for the product and we print the firmware number at
init and in ethtool -i output.  Just remove the print.

Change-ID: Ide0b856cd454ebf867610ef9a0d639bb358a4a60
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e.h      | 14 +++++++-------
 drivers/net/ethernet/intel/i40e/i40e_main.c |  7 -------
 2 files changed, 7 insertions(+), 14 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
index ba77fca628af..838b69b74edf 100644
--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -86,12 +86,12 @@
 
 #define I40E_NVM_VERSION_LO_SHIFT  0
 #define I40E_NVM_VERSION_LO_MASK   (0xff << I40E_NVM_VERSION_LO_SHIFT)
-#define I40E_NVM_VERSION_HI_SHIFT  8
-#define I40E_NVM_VERSION_HI_MASK   (0xff << I40E_NVM_VERSION_HI_SHIFT)
+#define I40E_NVM_VERSION_HI_SHIFT  12
+#define I40E_NVM_VERSION_HI_MASK   (0xf << I40E_NVM_VERSION_HI_SHIFT)
 
 /* The values in here are decimal coded as hex as is the case in the NVM map*/
 #define I40E_CURRENT_NVM_VERSION_HI 0x2
-#define I40E_CURRENT_NVM_VERSION_LO 0x30
+#define I40E_CURRENT_NVM_VERSION_LO 0x40
 
 /* magic for getting defines into strings */
 #define STRINGIFY(foo)  #foo
@@ -489,10 +489,10 @@ static inline char *i40e_fw_version_str(struct i40e_hw *hw)
 		 "f%d.%d a%d.%d n%02x.%02x e%08x",
 		 hw->aq.fw_maj_ver, hw->aq.fw_min_ver,
 		 hw->aq.api_maj_ver, hw->aq.api_min_ver,
-		 (hw->nvm.version & I40E_NVM_VERSION_HI_MASK)
-						>> I40E_NVM_VERSION_HI_SHIFT,
-		 (hw->nvm.version & I40E_NVM_VERSION_LO_MASK)
-						>> I40E_NVM_VERSION_LO_SHIFT,
+		 (hw->nvm.version & I40E_NVM_VERSION_HI_MASK) >>
+			I40E_NVM_VERSION_HI_SHIFT,
+		 (hw->nvm.version & I40E_NVM_VERSION_LO_MASK) >>
+			I40E_NVM_VERSION_LO_SHIFT,
 		 hw->nvm.eetrack);
 
 	return buf;
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 50d003258ff1..0fc6f9dce01a 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -7981,13 +7981,6 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	err = i40e_init_adminq(hw);
 	dev_info(&pdev->dev, "%s\n", i40e_fw_version_str(hw));
-	if (((hw->nvm.version & I40E_NVM_VERSION_HI_MASK)
-		 >> I40E_NVM_VERSION_HI_SHIFT) != I40E_CURRENT_NVM_VERSION_HI) {
-		dev_info(&pdev->dev,
-			 "warning: NVM version not supported, supported version: %02x.%02x\n",
-			 I40E_CURRENT_NVM_VERSION_HI,
-			 I40E_CURRENT_NVM_VERSION_LO);
-	}
 	if (err) {
 		dev_info(&pdev->dev,
 			 "init_adminq failed: %d expecting API %02x.%02x\n",
-- 
cgit v1.2.2


From be56052154c7129e6aab0e944f3d1ab331ff0cea Mon Sep 17 00:00:00 2001
From: Jesse Brandeburg <jesse.brandeburg@intel.com>
Date: Thu, 6 Feb 2014 05:51:13 +0000
Subject: i40e/i40evf: carefully fill tx ring

We need to make sure that we stay away from the cache line
where the DD bit (done) may be getting written back for
the transmit ring since the hardware may be writing the
whole cache line for a partial update.

Change-ID: Id0b6dfc01f654def6a2a021af185803be1915d7e
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_txrx.c   | 4 ++--
 drivers/net/ethernet/intel/i40evf/i40e_txrx.c | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index e4497f8e117d..2081bdb214e5 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -2102,7 +2102,7 @@ static int i40e_xmit_descriptor_count(struct sk_buff *skb,
 
 	/* need: 1 descriptor per page * PAGE_SIZE/I40E_MAX_DATA_PER_TXD,
 	 *       + 1 desc for skb_head_len/I40E_MAX_DATA_PER_TXD,
-	 *       + 2 desc gap to keep tail from touching head,
+	 *       + 4 desc gap to avoid the cache line where head is,
 	 *       + 1 desc for context descriptor,
 	 * otherwise try next time
 	 */
@@ -2113,7 +2113,7 @@ static int i40e_xmit_descriptor_count(struct sk_buff *skb,
 	count += skb_shinfo(skb)->nr_frags;
 #endif
 	count += TXD_USE_COUNT(skb_headlen(skb));
-	if (i40e_maybe_stop_tx(tx_ring, count + 3)) {
+	if (i40e_maybe_stop_tx(tx_ring, count + 4 + 1)) {
 		tx_ring->tx_stats.tx_busy++;
 		return 0;
 	}
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
index 01bfab729b01..b1d87c6a5c35 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
@@ -1482,7 +1482,7 @@ static int i40e_xmit_descriptor_count(struct sk_buff *skb,
 
 	/* need: 1 descriptor per page * PAGE_SIZE/I40E_MAX_DATA_PER_TXD,
 	 *       + 1 desc for skb_head_len/I40E_MAX_DATA_PER_TXD,
-	 *       + 2 desc gap to keep tail from touching head,
+	 *       + 4 desc gap to avoid the cache line where head is,
 	 *       + 1 desc for context descriptor,
 	 * otherwise try next time
 	 */
@@ -1493,7 +1493,7 @@ static int i40e_xmit_descriptor_count(struct sk_buff *skb,
 	count += skb_shinfo(skb)->nr_frags;
 #endif
 	count += TXD_USE_COUNT(skb_headlen(skb));
-	if (i40e_maybe_stop_tx(tx_ring, count + 3)) {
+	if (i40e_maybe_stop_tx(tx_ring, count + 4 + 1)) {
 		tx_ring->tx_stats.tx_busy++;
 		return 0;
 	}
-- 
cgit v1.2.2


From 2062862a46b6ba35368449ec8d719cfdf467a912 Mon Sep 17 00:00:00 2001
From: Catherine Sullivan <catherine.sullivan@intel.com>
Date: Thu, 6 Feb 2014 05:51:14 +0000
Subject: i40e/i40evf: Bump pf&vf build versions

Bump i40e to 0.3.34 and i40evf to 0.9.14.

Change-ID: I6b3fb8ccf55b128d2baa4bdc20d3911ec81d4a5b
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c     | 2 +-
 drivers/net/ethernet/intel/i40evf/i40evf_main.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 0fc6f9dce01a..43d391bb65c4 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -38,7 +38,7 @@ static const char i40e_driver_string[] =
 
 #define DRV_VERSION_MAJOR 0
 #define DRV_VERSION_MINOR 3
-#define DRV_VERSION_BUILD 32
+#define DRV_VERSION_BUILD 34
 #define DRV_VERSION __stringify(DRV_VERSION_MAJOR) "." \
 	     __stringify(DRV_VERSION_MINOR) "." \
 	     __stringify(DRV_VERSION_BUILD)    DRV_KERN
diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index 3d3ab14c0d97..11d0b61510b0 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -31,7 +31,7 @@ char i40evf_driver_name[] = "i40evf";
 static const char i40evf_driver_string[] =
 	"Intel(R) XL710 X710 Virtual Function Network Driver";
 
-#define DRV_VERSION "0.9.13"
+#define DRV_VERSION "0.9.14"
 const char i40evf_driver_version[] = DRV_VERSION;
 static const char i40evf_copyright[] =
 	"Copyright (c) 2013 - 2014 Intel Corporation.";
-- 
cgit v1.2.2


From bfa353689ae9bff3aa1cfe146defff17032a4a02 Mon Sep 17 00:00:00 2001
From: Ben Greear <greearb@candelatech.com>
Date: Mon, 3 Mar 2014 14:07:09 -0800
Subject: ath10k: support msdu chaining

Consolidate the list of msdu skbs into the msdu-head skb, delete the
rest of the skbs, pass the msdu-head skb on up the stack as normal.

Tested with high-speed TCP and UDP traffic on modified firmware that
supports raw-rx.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/htt_rx.c | 59 +++++++++++++++++++++++++++++---
 1 file changed, 54 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index 36a3871097a2..cdcbe2de95f9 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -398,6 +398,7 @@ static int ath10k_htt_rx_amsdu_pop(struct ath10k_htt *htt,
 		msdu_len = MS(__le32_to_cpu(rx_desc->msdu_start.info0),
 			      RX_MSDU_START_INFO0_MSDU_LENGTH);
 		msdu_chained = rx_desc->frag_info.ring2_more_count;
+		msdu_chaining = msdu_chained;
 
 		if (msdu_len_invalid)
 			msdu_len = 0;
@@ -425,7 +426,6 @@ static int ath10k_htt_rx_amsdu_pop(struct ath10k_htt *htt,
 
 			msdu->next = next;
 			msdu = next;
-			msdu_chaining = 1;
 		}
 
 		last_msdu = __le32_to_cpu(rx_desc->msdu_end.info0) &
@@ -901,6 +901,57 @@ static int ath10k_htt_rx_get_csum_state(struct sk_buff *skb)
 	return CHECKSUM_UNNECESSARY;
 }
 
+static int ath10k_unchain_msdu(struct sk_buff *msdu_head)
+{
+	struct sk_buff *next = msdu_head->next;
+	struct sk_buff *to_free = next;
+	int space;
+	int total_len = 0;
+
+	/* TODO:  Might could optimize this by using
+	 * skb_try_coalesce or similar method to
+	 * decrease copying, or maybe get mac80211 to
+	 * provide a way to just receive a list of
+	 * skb?
+	 */
+
+	msdu_head->next = NULL;
+
+	/* Allocate total length all at once. */
+	while (next) {
+		total_len += next->len;
+		next = next->next;
+	}
+
+	space = total_len - skb_tailroom(msdu_head);
+	if ((space > 0) &&
+	    (pskb_expand_head(msdu_head, 0, space, GFP_ATOMIC) < 0)) {
+		/* TODO:  bump some rx-oom error stat */
+		/* put it back together so we can free the
+		 * whole list at once.
+		 */
+		msdu_head->next = to_free;
+		return -1;
+	}
+
+	/* Walk list again, copying contents into
+	 * msdu_head
+	 */
+	next = to_free;
+	while (next) {
+		skb_copy_from_linear_data(next, skb_put(msdu_head, next->len),
+					  next->len);
+		next = next->next;
+	}
+
+	/* If here, we have consolidated skb.  Free the
+	 * fragments and pass the main skb on up the
+	 * stack.
+	 */
+	ath10k_htt_rx_free_msdu_chain(to_free);
+	return 0;
+}
+
 static void ath10k_htt_rx_handler(struct ath10k_htt *htt,
 				  struct htt_rx_indication *rx)
 {
@@ -991,10 +1042,8 @@ static void ath10k_htt_rx_handler(struct ath10k_htt *htt,
 				continue;
 			}
 
-			/* FIXME: we do not support chaining yet.
-			 * this needs investigation */
-			if (msdu_chaining) {
-				ath10k_warn("htt rx msdu_chaining is true\n");
+			if (msdu_chaining &&
+			    (ath10k_unchain_msdu(msdu_head) < 0)) {
 				ath10k_htt_rx_free_msdu_chain(msdu_head);
 				continue;
 			}
-- 
cgit v1.2.2


From 70dd77b4c50da518b57b8b9b125a8c9aabe9bc1a Mon Sep 17 00:00:00 2001
From: Marek Puzyniak <marek.puzyniak@tieto.com>
Date: Wed, 5 Mar 2014 13:10:33 +0100
Subject: ath10k: do not overwrite max_antenna_gain

Seems like we have an old bug, where we incidently overwrites
the max_antenna_gain we pass to firmware, with zero value.

End of all we are artifically reducing the output power.

This patch removes the excessive assignment on max_antenna_gain,
which is being provided by regulatory domain, and consequently
improves the tx power.

Signed-off-by: Marek Puzyniak <marek.puzyniak@tieto.com>
Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/wmi.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 478e7f669e79..cb1f7b5bcf4c 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -3393,7 +3393,6 @@ int ath10k_wmi_scan_chan_list(struct ath10k *ar,
 		ci->max_power         = ch->max_power;
 		ci->reg_power         = ch->max_reg_power;
 		ci->antenna_max       = ch->max_antenna_gain;
-		ci->antenna_max       = 0;
 
 		/* mode & flags share storage */
 		ci->mode              = ch->mode;
-- 
cgit v1.2.2


From a8ca2efce43f81153b81c712f7d8faf7666f55cc Mon Sep 17 00:00:00 2001
From: Marc Kleine-Budde <mkl@pengutronix.de>
Date: Tue, 4 Mar 2014 22:00:47 +0100
Subject: can: janz-ican3: convert dev_<level> printing to netdev_<level>

This patch converts the dev_<level> printing to netdev_<level>, this makes it
possible to remove the "struct device *dev" pointer from the "struct
ican3_dev".

Cc: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/janz-ican3.c | 64 +++++++++++++++++++++-----------------------
 1 file changed, 30 insertions(+), 34 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/can/janz-ican3.c b/drivers/net/can/janz-ican3.c
index 71594e5676fd..b47df5e482fa 100644
--- a/drivers/net/can/janz-ican3.c
+++ b/drivers/net/can/janz-ican3.c
@@ -198,9 +198,6 @@ struct ican3_dev {
 	struct net_device *ndev;
 	struct napi_struct napi;
 
-	/* Device for printing */
-	struct device *dev;
-
 	/* module number */
 	unsigned int num;
 
@@ -295,7 +292,7 @@ static int ican3_old_recv_msg(struct ican3_dev *mod, struct ican3_msg *msg)
 	xord = locl ^ peer;
 
 	if ((xord & MSYNC_RB_MASK) == 0x00) {
-		dev_dbg(mod->dev, "no mbox for reading\n");
+		netdev_dbg(mod->ndev, "no mbox for reading\n");
 		return -ENOMEM;
 	}
 
@@ -340,7 +337,7 @@ static int ican3_old_send_msg(struct ican3_dev *mod, struct ican3_msg *msg)
 	xord = locl ^ peer;
 
 	if ((xord & MSYNC_WB_MASK) == MSYNC_WB_MASK) {
-		dev_err(mod->dev, "no mbox for writing\n");
+		netdev_err(mod->ndev, "no mbox for writing\n");
 		return -ENOMEM;
 	}
 
@@ -542,7 +539,7 @@ static int ican3_new_send_msg(struct ican3_dev *mod, struct ican3_msg *msg)
 	memcpy_fromio(&desc, desc_addr, sizeof(desc));
 
 	if (!(desc.control & DESC_VALID)) {
-		dev_dbg(mod->dev, "%s: no free buffers\n", __func__);
+		netdev_dbg(mod->ndev, "%s: no free buffers\n", __func__);
 		return -ENOMEM;
 	}
 
@@ -573,7 +570,7 @@ static int ican3_new_recv_msg(struct ican3_dev *mod, struct ican3_msg *msg)
 	memcpy_fromio(&desc, desc_addr, sizeof(desc));
 
 	if (!(desc.control & DESC_VALID)) {
-		dev_dbg(mod->dev, "%s: no buffers to recv\n", __func__);
+		netdev_dbg(mod->ndev, "%s: no buffers to recv\n", __func__);
 		return -ENOMEM;
 	}
 
@@ -883,7 +880,7 @@ static void can_frame_to_ican3(struct ican3_dev *mod,
  */
 static void ican3_handle_idvers(struct ican3_dev *mod, struct ican3_msg *msg)
 {
-	dev_dbg(mod->dev, "IDVERS response: %s\n", msg->data);
+	netdev_dbg(mod->ndev, "IDVERS response: %s\n", msg->data);
 }
 
 static void ican3_handle_msglost(struct ican3_dev *mod, struct ican3_msg *msg)
@@ -899,7 +896,7 @@ static void ican3_handle_msglost(struct ican3_dev *mod, struct ican3_msg *msg)
 	 * error frame for userspace
 	 */
 	if (msg->spec == MSG_MSGLOST) {
-		dev_err(mod->dev, "lost %d control messages\n", msg->data[0]);
+		netdev_err(mod->ndev, "lost %d control messages\n", msg->data[0]);
 		return;
 	}
 
@@ -939,13 +936,13 @@ static int ican3_handle_cevtind(struct ican3_dev *mod, struct ican3_msg *msg)
 
 	/* we can only handle the SJA1000 part */
 	if (msg->data[1] != CEVTIND_CHIP_SJA1000) {
-		dev_err(mod->dev, "unable to handle errors on non-SJA1000\n");
+		netdev_err(mod->ndev, "unable to handle errors on non-SJA1000\n");
 		return -ENODEV;
 	}
 
 	/* check the message length for sanity */
 	if (le16_to_cpu(msg->len) < 6) {
-		dev_err(mod->dev, "error message too short\n");
+		netdev_err(mod->ndev, "error message too short\n");
 		return -EINVAL;
 	}
 
@@ -967,7 +964,7 @@ static int ican3_handle_cevtind(struct ican3_dev *mod, struct ican3_msg *msg)
 	 */
 	if (isrc == CEVTIND_BEI) {
 		int ret;
-		dev_dbg(mod->dev, "bus error interrupt\n");
+		netdev_dbg(mod->ndev, "bus error interrupt\n");
 
 		/* TX error */
 		if (!(ecc & ECC_DIR)) {
@@ -983,7 +980,7 @@ static int ican3_handle_cevtind(struct ican3_dev *mod, struct ican3_msg *msg)
 		 */
 		ret = ican3_set_buserror(mod, 1);
 		if (ret) {
-			dev_err(mod->dev, "unable to re-enable bus-error\n");
+			netdev_err(mod->ndev, "unable to re-enable bus-error\n");
 			return ret;
 		}
 
@@ -998,7 +995,7 @@ static int ican3_handle_cevtind(struct ican3_dev *mod, struct ican3_msg *msg)
 
 	/* data overrun interrupt */
 	if (isrc == CEVTIND_DOI || isrc == CEVTIND_LOST) {
-		dev_dbg(mod->dev, "data overrun interrupt\n");
+		netdev_dbg(mod->ndev, "data overrun interrupt\n");
 		cf->can_id |= CAN_ERR_CRTL;
 		cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW;
 		stats->rx_over_errors++;
@@ -1007,7 +1004,7 @@ static int ican3_handle_cevtind(struct ican3_dev *mod, struct ican3_msg *msg)
 
 	/* error warning + passive interrupt */
 	if (isrc == CEVTIND_EI) {
-		dev_dbg(mod->dev, "error warning + passive interrupt\n");
+		netdev_dbg(mod->ndev, "error warning + passive interrupt\n");
 		if (status & SR_BS) {
 			state = CAN_STATE_BUS_OFF;
 			cf->can_id |= CAN_ERR_BUSOFF;
@@ -1088,7 +1085,7 @@ static void ican3_handle_inquiry(struct ican3_dev *mod, struct ican3_msg *msg)
 		complete(&mod->termination_comp);
 		break;
 	default:
-		dev_err(mod->dev, "received an unknown inquiry response\n");
+		netdev_err(mod->ndev, "received an unknown inquiry response\n");
 		break;
 	}
 }
@@ -1096,7 +1093,7 @@ static void ican3_handle_inquiry(struct ican3_dev *mod, struct ican3_msg *msg)
 static void ican3_handle_unknown_message(struct ican3_dev *mod,
 					struct ican3_msg *msg)
 {
-	dev_warn(mod->dev, "received unknown message: spec 0x%.2x length %d\n",
+	netdev_warn(mod->ndev, "received unknown message: spec 0x%.2x length %d\n",
 			   msg->spec, le16_to_cpu(msg->len));
 }
 
@@ -1105,7 +1102,7 @@ static void ican3_handle_unknown_message(struct ican3_dev *mod,
  */
 static void ican3_handle_message(struct ican3_dev *mod, struct ican3_msg *msg)
 {
-	dev_dbg(mod->dev, "%s: modno %d spec 0x%.2x len %d bytes\n", __func__,
+	netdev_dbg(mod->ndev, "%s: modno %d spec 0x%.2x len %d bytes\n", __func__,
 			   mod->num, msg->spec, le16_to_cpu(msg->len));
 
 	switch (msg->spec) {
@@ -1406,7 +1403,7 @@ static int ican3_reset_module(struct ican3_dev *mod)
 		msleep(10);
 	} while (time_before(jiffies, start + HZ / 4));
 
-	dev_err(mod->dev, "failed to reset CAN module\n");
+	netdev_err(mod->ndev, "failed to reset CAN module\n");
 	return -ETIMEDOUT;
 }
 
@@ -1425,7 +1422,7 @@ static int ican3_startup_module(struct ican3_dev *mod)
 
 	ret = ican3_reset_module(mod);
 	if (ret) {
-		dev_err(mod->dev, "unable to reset module\n");
+		netdev_err(mod->ndev, "unable to reset module\n");
 		return ret;
 	}
 
@@ -1434,41 +1431,41 @@ static int ican3_startup_module(struct ican3_dev *mod)
 
 	ret = ican3_msg_connect(mod);
 	if (ret) {
-		dev_err(mod->dev, "unable to connect to module\n");
+		netdev_err(mod->ndev, "unable to connect to module\n");
 		return ret;
 	}
 
 	ican3_init_new_host_interface(mod);
 	ret = ican3_msg_newhostif(mod);
 	if (ret) {
-		dev_err(mod->dev, "unable to switch to new-style interface\n");
+		netdev_err(mod->ndev, "unable to switch to new-style interface\n");
 		return ret;
 	}
 
 	/* default to "termination on" */
 	ret = ican3_set_termination(mod, true);
 	if (ret) {
-		dev_err(mod->dev, "unable to enable termination\n");
+		netdev_err(mod->ndev, "unable to enable termination\n");
 		return ret;
 	}
 
 	/* default to "bus errors enabled" */
 	ret = ican3_set_buserror(mod, 1);
 	if (ret) {
-		dev_err(mod->dev, "unable to set bus-error\n");
+		netdev_err(mod->ndev, "unable to set bus-error\n");
 		return ret;
 	}
 
 	ican3_init_fast_host_interface(mod);
 	ret = ican3_msg_fasthostif(mod);
 	if (ret) {
-		dev_err(mod->dev, "unable to switch to fast host interface\n");
+		netdev_err(mod->ndev, "unable to switch to fast host interface\n");
 		return ret;
 	}
 
 	ret = ican3_set_id_filter(mod, true);
 	if (ret) {
-		dev_err(mod->dev, "unable to set acceptance filter\n");
+		netdev_err(mod->ndev, "unable to set acceptance filter\n");
 		return ret;
 	}
 
@@ -1487,14 +1484,14 @@ static int ican3_open(struct net_device *ndev)
 	/* open the CAN layer */
 	ret = open_candev(ndev);
 	if (ret) {
-		dev_err(mod->dev, "unable to start CAN layer\n");
+		netdev_err(mod->ndev, "unable to start CAN layer\n");
 		return ret;
 	}
 
 	/* bring the bus online */
 	ret = ican3_set_bus_state(mod, true);
 	if (ret) {
-		dev_err(mod->dev, "unable to set bus-on\n");
+		netdev_err(mod->ndev, "unable to set bus-on\n");
 		close_candev(ndev);
 		return ret;
 	}
@@ -1518,7 +1515,7 @@ static int ican3_stop(struct net_device *ndev)
 	/* bring the bus offline, stop receiving packets */
 	ret = ican3_set_bus_state(mod, false);
 	if (ret) {
-		dev_err(mod->dev, "unable to set bus-off\n");
+		netdev_err(mod->ndev, "unable to set bus-off\n");
 		return ret;
 	}
 
@@ -1545,7 +1542,7 @@ static int ican3_xmit(struct sk_buff *skb, struct net_device *ndev)
 
 	/* check that we can actually transmit */
 	if (!ican3_txok(mod)) {
-		dev_err(mod->dev, "BUG: no free descriptors\n");
+		netdev_err(mod->ndev, "BUG: no free descriptors\n");
 		spin_unlock_irqrestore(&mod->lock, flags);
 		return NETDEV_TX_BUSY;
 	}
@@ -1657,7 +1654,7 @@ static int ican3_set_mode(struct net_device *ndev, enum can_mode mode)
 	/* bring the bus online */
 	ret = ican3_set_bus_state(mod, true);
 	if (ret) {
-		dev_err(mod->dev, "unable to set bus-on\n");
+		netdev_err(ndev, "unable to set bus-on\n");
 		return ret;
 	}
 
@@ -1682,7 +1679,7 @@ static int ican3_get_berr_counter(const struct net_device *ndev,
 
 	ret = wait_for_completion_timeout(&mod->buserror_comp, HZ);
 	if (ret == 0) {
-		dev_info(mod->dev, "%s timed out\n", __func__);
+		netdev_info(mod->ndev, "%s timed out\n", __func__);
 		return -ETIMEDOUT;
 	}
 
@@ -1708,7 +1705,7 @@ static ssize_t ican3_sysfs_show_term(struct device *dev,
 
 	ret = wait_for_completion_timeout(&mod->termination_comp, HZ);
 	if (ret == 0) {
-		dev_info(mod->dev, "%s timed out\n", __func__);
+		netdev_info(mod->ndev, "%s timed out\n", __func__);
 		return -ETIMEDOUT;
 	}
 
@@ -1778,7 +1775,6 @@ static int ican3_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, ndev);
 	mod = netdev_priv(ndev);
 	mod->ndev = ndev;
-	mod->dev = &pdev->dev;
 	mod->num = pdata->modno;
 	netif_napi_add(ndev, &mod->napi, ican3_napi, ICAN3_RX_BUFFERS);
 	skb_queue_head_init(&mod->echoq);
-- 
cgit v1.2.2


From a94bc9c46e8e3e1bb5f707e81fd8c60fd93266e6 Mon Sep 17 00:00:00 2001
From: Oliver Hartkopp <socketcan@hartkopp.net>
Date: Fri, 28 Feb 2014 16:36:19 +0100
Subject: can: preserve skbuff protocol in can_put_echo_skb

The skbuff protocol value was formerly fixed/sanitized to ETH_P_CAN in
can_put_echo_skb(). With CAN FD this value has to be preserved.
This patch changes the hard assignment of the protocol value to a check of
valid protocol values for CAN and CAN FD.

Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Acked-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/dev.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c
index c0563f183721..e1a37413d53e 100644
--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -317,7 +317,9 @@ void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev,
 	BUG_ON(idx >= priv->echo_skb_max);
 
 	/* check flag whether this packet has to be looped back */
-	if (!(dev->flags & IFF_ECHO) || skb->pkt_type != PACKET_LOOPBACK) {
+	if (!(dev->flags & IFF_ECHO) || skb->pkt_type != PACKET_LOOPBACK ||
+	    (skb->protocol != htons(ETH_P_CAN) &&
+	     skb->protocol != htons(ETH_P_CANFD))) {
 		kfree_skb(skb);
 		return;
 	}
@@ -329,7 +331,6 @@ void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev,
 			return;
 
 		/* make settings for echo to reduce code in irq context */
-		skb->protocol = htons(ETH_P_CAN);
 		skb->pkt_type = PACKET_BROADCAST;
 		skb->ip_summed = CHECKSUM_UNNECESSARY;
 		skb->dev = dev;
-- 
cgit v1.2.2


From b30749fdfb9b72f4b1f03673cb5e45b8d4331188 Mon Sep 17 00:00:00 2001
From: Oliver Hartkopp <socketcan@hartkopp.net>
Date: Fri, 28 Feb 2014 16:36:20 +0100
Subject: can: only send bitrate data via netlink when available

When setting the bitrate both can_calc_bittiming() and can_fixup_bittiming()
lead to the bitrate variable to be set, when a proper bit timing is available.
Only then the bitrate configuration is stored for the device, so checking for
priv->bittiming.bitrate is always sufficient.

Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Acked-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/dev.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c
index e1a37413d53e..de04eac7c5f3 100644
--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -606,7 +606,7 @@ int open_candev(struct net_device *dev)
 {
 	struct can_priv *priv = netdev_priv(dev);
 
-	if (!priv->bittiming.tq && !priv->bittiming.bitrate) {
+	if (!priv->bittiming.bitrate) {
 		netdev_err(dev, "bit-timing not yet defined\n");
 		return -EINVAL;
 	}
@@ -719,7 +719,8 @@ static size_t can_get_size(const struct net_device *dev)
 	struct can_priv *priv = netdev_priv(dev);
 	size_t size = 0;
 
-	size += nla_total_size(sizeof(struct can_bittiming));	/* IFLA_CAN_BITTIMING */
+	if (priv->bittiming.bitrate)				/* IFLA_CAN_BITTIMING */
+		size += nla_total_size(sizeof(struct can_bittiming));
 	if (priv->bittiming_const)				/* IFLA_CAN_BITTIMING_CONST */
 		size += nla_total_size(sizeof(struct can_bittiming_const));
 	size += nla_total_size(sizeof(struct can_clock));	/* IFLA_CAN_CLOCK */
@@ -741,8 +742,9 @@ static int can_fill_info(struct sk_buff *skb, const struct net_device *dev)
 
 	if (priv->do_get_state)
 		priv->do_get_state(dev, &state);
-	if (nla_put(skb, IFLA_CAN_BITTIMING,
-		    sizeof(priv->bittiming), &priv->bittiming) ||
+	if ((priv->bittiming.bitrate &&
+	     nla_put(skb, IFLA_CAN_BITTIMING,
+		     sizeof(priv->bittiming), &priv->bittiming)) ||
 	    (priv->bittiming_const &&
 	     nla_put(skb, IFLA_CAN_BITTIMING_CONST,
 		     sizeof(*priv->bittiming_const), priv->bittiming_const)) ||
-- 
cgit v1.2.2


From d5298dffebae76810a6a942bc6467f893bc11eee Mon Sep 17 00:00:00 2001
From: Oliver Hartkopp <socketcan@hartkopp.net>
Date: Fri, 28 Feb 2014 16:36:21 +0100
Subject: can: move sanity check for bitrate and tq into can_get_bittiming

This patch moves a sanity check in order to have a second user for CAN FD.
Also simplify the return value generation in can_get_bittiming() as only
correct return values of can_[calc|fixup]_bittiming() lead to a return value of
zero.

Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Acked-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/dev.c | 29 +++++++++++++++--------------
 1 file changed, 15 insertions(+), 14 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c
index de04eac7c5f3..e5f1faf36d8f 100644
--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -260,20 +260,23 @@ static int can_get_bittiming(struct net_device *dev, struct can_bittiming *bt)
 	int err;
 
 	/* Check if the CAN device has bit-timing parameters */
-	if (priv->bittiming_const) {
+	if (!priv->bittiming_const)
+		return 0;
 
-		/* Non-expert mode? Check if the bitrate has been pre-defined */
-		if (!bt->tq)
-			/* Determine bit-timing parameters */
-			err = can_calc_bittiming(dev, bt);
-		else
-			/* Check bit-timing params and calculate proper brp */
-			err = can_fixup_bittiming(dev, bt);
-		if (err)
-			return err;
-	}
+	/*
+	 * Depending on the given can_bittiming parameter structure the CAN
+	 * timing parameters are calculated based on the provided bitrate OR
+	 * alternatively the CAN timing parameters (tq, prop_seg, etc.) are
+	 * provided directly which are then checked and fixed up.
+	 */
+	if (!bt->tq && bt->bitrate)
+		err = can_calc_bittiming(dev, bt);
+	else if (bt->tq && !bt->bitrate)
+		err = can_fixup_bittiming(dev, bt);
+	else
+		err = -EINVAL;
 
-	return 0;
+	return err;
 }
 
 /*
@@ -667,8 +670,6 @@ static int can_changelink(struct net_device *dev,
 		if (dev->flags & IFF_UP)
 			return -EBUSY;
 		memcpy(&bt, nla_data(data[IFLA_CAN_BITTIMING]), sizeof(bt));
-		if ((!bt.bitrate && !bt.tq) || (bt.bitrate && bt.tq))
-			return -EINVAL;
 		err = can_get_bittiming(dev, &bt);
 		if (err)
 			return err;
-- 
cgit v1.2.2


From 08da7da41ea490eab08ad9e2674e3b92d6aa2b07 Mon Sep 17 00:00:00 2001
From: Oliver Hartkopp <socketcan@hartkopp.net>
Date: Fri, 28 Feb 2014 16:36:22 +0100
Subject: can: provide a separate bittiming_const parameter to bittiming
 functions

As the bittiming calculation functions are to be used with different
bittiming_const structures for CAN and CAN FD the direct reference to
priv->bittiming_const inside these functions has to be removed.

Also moved the check for existing bittiming const to one place.

Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Acked-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/dev.c | 31 +++++++++++++------------------
 1 file changed, 13 insertions(+), 18 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c
index e5f1faf36d8f..8141290e4c18 100644
--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -99,10 +99,10 @@ static int can_update_spt(const struct can_bittiming_const *btc,
 	return 1000 * (tseg + 1 - *tseg2) / (tseg + 1);
 }
 
-static int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt)
+static int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt,
+			      const struct can_bittiming_const *btc)
 {
 	struct can_priv *priv = netdev_priv(dev);
-	const struct can_bittiming_const *btc = priv->bittiming_const;
 	long rate, best_rate = 0;
 	long best_error = 1000000000, error = 0;
 	int best_tseg = 0, best_brp = 0, brp = 0;
@@ -110,9 +110,6 @@ static int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt)
 	int spt_error = 1000, spt = 0, sampl_pt;
 	u64 v64;
 
-	if (!priv->bittiming_const)
-		return -ENOTSUPP;
-
 	/* Use CIA recommended sample points */
 	if (bt->sample_point) {
 		sampl_pt = bt->sample_point;
@@ -204,7 +201,8 @@ static int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt)
 	return 0;
 }
 #else /* !CONFIG_CAN_CALC_BITTIMING */
-static int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt)
+static int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt,
+			      const struct can_bittiming_const *btc)
 {
 	netdev_err(dev, "bit-timing calculation not available\n");
 	return -EINVAL;
@@ -217,16 +215,13 @@ static int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt)
  * prescaler value brp. You can find more information in the header
  * file linux/can/netlink.h.
  */
-static int can_fixup_bittiming(struct net_device *dev, struct can_bittiming *bt)
+static int can_fixup_bittiming(struct net_device *dev, struct can_bittiming *bt,
+			       const struct can_bittiming_const *btc)
 {
 	struct can_priv *priv = netdev_priv(dev);
-	const struct can_bittiming_const *btc = priv->bittiming_const;
 	int tseg1, alltseg;
 	u64 brp64;
 
-	if (!priv->bittiming_const)
-		return -ENOTSUPP;
-
 	tseg1 = bt->prop_seg + bt->phase_seg1;
 	if (!bt->sjw)
 		bt->sjw = 1;
@@ -254,14 +249,14 @@ static int can_fixup_bittiming(struct net_device *dev, struct can_bittiming *bt)
 	return 0;
 }
 
-static int can_get_bittiming(struct net_device *dev, struct can_bittiming *bt)
+static int can_get_bittiming(struct net_device *dev, struct can_bittiming *bt,
+			     const struct can_bittiming_const *btc)
 {
-	struct can_priv *priv = netdev_priv(dev);
 	int err;
 
 	/* Check if the CAN device has bit-timing parameters */
-	if (!priv->bittiming_const)
-		return 0;
+	if (!btc)
+		return -ENOTSUPP;
 
 	/*
 	 * Depending on the given can_bittiming parameter structure the CAN
@@ -270,9 +265,9 @@ static int can_get_bittiming(struct net_device *dev, struct can_bittiming *bt)
 	 * provided directly which are then checked and fixed up.
 	 */
 	if (!bt->tq && bt->bitrate)
-		err = can_calc_bittiming(dev, bt);
+		err = can_calc_bittiming(dev, bt, btc);
 	else if (bt->tq && !bt->bitrate)
-		err = can_fixup_bittiming(dev, bt);
+		err = can_fixup_bittiming(dev, bt, btc);
 	else
 		err = -EINVAL;
 
@@ -670,7 +665,7 @@ static int can_changelink(struct net_device *dev,
 		if (dev->flags & IFF_UP)
 			return -EBUSY;
 		memcpy(&bt, nla_data(data[IFLA_CAN_BITTIMING]), sizeof(bt));
-		err = can_get_bittiming(dev, &bt);
+		err = can_get_bittiming(dev, &bt, priv->bittiming_const);
 		if (err)
 			return err;
 		memcpy(&priv->bittiming, &bt, sizeof(bt));
-- 
cgit v1.2.2


From 9859ccd2c8be63ce939522e63e265f2b0caa1109 Mon Sep 17 00:00:00 2001
From: Oliver Hartkopp <socketcan@hartkopp.net>
Date: Fri, 28 Feb 2014 16:36:23 +0100
Subject: can: introduce the data bitrate configuration for CAN FD

As CAN FD offers a second bitrate for the data section of the CAN frame the
infrastructure for storing and configuring this second bitrate is introduced.
Improved the readability of the if-statement by inserting some newlines.

Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Acked-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/dev.c | 45 ++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 44 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c
index 8141290e4c18..8ebe112458c4 100644
--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -647,6 +647,10 @@ static const struct nla_policy can_policy[IFLA_CAN_MAX + 1] = {
 				= { .len = sizeof(struct can_bittiming_const) },
 	[IFLA_CAN_CLOCK]	= { .len = sizeof(struct can_clock) },
 	[IFLA_CAN_BERR_COUNTER]	= { .len = sizeof(struct can_berr_counter) },
+	[IFLA_CAN_DATA_BITTIMING]
+				= { .len = sizeof(struct can_bittiming) },
+	[IFLA_CAN_DATA_BITTIMING_CONST]
+				= { .len = sizeof(struct can_bittiming_const) },
 };
 
 static int can_changelink(struct net_device *dev,
@@ -707,6 +711,27 @@ static int can_changelink(struct net_device *dev,
 			return err;
 	}
 
+	if (data[IFLA_CAN_DATA_BITTIMING]) {
+		struct can_bittiming dbt;
+
+		/* Do not allow changing bittiming while running */
+		if (dev->flags & IFF_UP)
+			return -EBUSY;
+		memcpy(&dbt, nla_data(data[IFLA_CAN_DATA_BITTIMING]),
+		       sizeof(dbt));
+		err = can_get_bittiming(dev, &dbt, priv->data_bittiming_const);
+		if (err)
+			return err;
+		memcpy(&priv->data_bittiming, &dbt, sizeof(dbt));
+
+		if (priv->do_set_data_bittiming) {
+			/* Finally, set the bit-timing registers */
+			err = priv->do_set_data_bittiming(dev);
+			if (err)
+				return err;
+		}
+	}
+
 	return 0;
 }
 
@@ -725,6 +750,10 @@ static size_t can_get_size(const struct net_device *dev)
 	size += nla_total_size(sizeof(u32));			/* IFLA_CAN_RESTART_MS */
 	if (priv->do_get_berr_counter)				/* IFLA_CAN_BERR_COUNTER */
 		size += nla_total_size(sizeof(struct can_berr_counter));
+	if (priv->data_bittiming.bitrate)			/* IFLA_CAN_DATA_BITTIMING */
+		size += nla_total_size(sizeof(struct can_bittiming));
+	if (priv->data_bittiming_const)				/* IFLA_CAN_DATA_BITTIMING_CONST */
+		size += nla_total_size(sizeof(struct can_bittiming_const));
 
 	return size;
 }
@@ -738,20 +767,34 @@ static int can_fill_info(struct sk_buff *skb, const struct net_device *dev)
 
 	if (priv->do_get_state)
 		priv->do_get_state(dev, &state);
+
 	if ((priv->bittiming.bitrate &&
 	     nla_put(skb, IFLA_CAN_BITTIMING,
 		     sizeof(priv->bittiming), &priv->bittiming)) ||
+
 	    (priv->bittiming_const &&
 	     nla_put(skb, IFLA_CAN_BITTIMING_CONST,
 		     sizeof(*priv->bittiming_const), priv->bittiming_const)) ||
+
 	    nla_put(skb, IFLA_CAN_CLOCK, sizeof(cm), &priv->clock) ||
 	    nla_put_u32(skb, IFLA_CAN_STATE, state) ||
 	    nla_put(skb, IFLA_CAN_CTRLMODE, sizeof(cm), &cm) ||
 	    nla_put_u32(skb, IFLA_CAN_RESTART_MS, priv->restart_ms) ||
+
 	    (priv->do_get_berr_counter &&
 	     !priv->do_get_berr_counter(dev, &bec) &&
-	     nla_put(skb, IFLA_CAN_BERR_COUNTER, sizeof(bec), &bec)))
+	     nla_put(skb, IFLA_CAN_BERR_COUNTER, sizeof(bec), &bec)) ||
+
+	    (priv->data_bittiming.bitrate &&
+	     nla_put(skb, IFLA_CAN_DATA_BITTIMING,
+		     sizeof(priv->data_bittiming), &priv->data_bittiming)) ||
+
+	    (priv->data_bittiming_const &&
+	     nla_put(skb, IFLA_CAN_DATA_BITTIMING_CONST,
+		     sizeof(*priv->data_bittiming_const),
+		     priv->data_bittiming_const)))
 		return -EMSGSIZE;
+
 	return 0;
 }
 
-- 
cgit v1.2.2


From bc05a8944a344acdb81a65de055ca6febbf9657c Mon Sep 17 00:00:00 2001
From: Oliver Hartkopp <socketcan@hartkopp.net>
Date: Fri, 28 Feb 2014 16:36:24 +0100
Subject: can: allow to change the device mtu for CAN FD capable devices

The configuration for CAN FD depends on CAN_CTRLMODE_FD enabled in the driver
specific ctrlmode_supported capabilities.

The configuration can be done either with the 'fd { on | off }' option in the
'ip' tool from iproute2 or by setting the CAN netdevice MTU to CAN_MTU (16) or
to CANFD_MTU (72).

Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Acked-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/dev.c | 39 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c
index 8ebe112458c4..4e20d82b799e 100644
--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -594,6 +594,39 @@ void free_candev(struct net_device *dev)
 }
 EXPORT_SYMBOL_GPL(free_candev);
 
+/*
+ * changing MTU and control mode for CAN/CANFD devices
+ */
+int can_change_mtu(struct net_device *dev, int new_mtu)
+{
+	struct can_priv *priv = netdev_priv(dev);
+
+	/* Do not allow changing the MTU while running */
+	if (dev->flags & IFF_UP)
+		return -EBUSY;
+
+	/* allow change of MTU according to the CANFD ability of the device */
+	switch (new_mtu) {
+	case CAN_MTU:
+		priv->ctrlmode &= ~CAN_CTRLMODE_FD;
+		break;
+
+	case CANFD_MTU:
+		if (!(priv->ctrlmode_supported & CAN_CTRLMODE_FD))
+			return -EINVAL;
+
+		priv->ctrlmode |= CAN_CTRLMODE_FD;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	dev->mtu = new_mtu;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(can_change_mtu);
+
 /*
  * Common open function when the device gets opened.
  *
@@ -693,6 +726,12 @@ static int can_changelink(struct net_device *dev,
 			return -EOPNOTSUPP;
 		priv->ctrlmode &= ~cm->mask;
 		priv->ctrlmode |= cm->flags;
+
+		/* CAN_CTRLMODE_FD can only be set when driver supports FD */
+		if (priv->ctrlmode & CAN_CTRLMODE_FD)
+			dev->mtu = CANFD_MTU;
+		else
+			dev->mtu = CAN_MTU;
 	}
 
 	if (data[IFLA_CAN_RESTART_MS]) {
-- 
cgit v1.2.2


From dd22586dec4c1444608affd83b1fedd520280ab4 Mon Sep 17 00:00:00 2001
From: Oliver Hartkopp <socketcan@hartkopp.net>
Date: Fri, 28 Feb 2014 16:36:25 +0100
Subject: can: add bittiming check at interface open for CAN FD

Additionally to have the second (data) bitrate available the data bitrate
has to be greater or equal to the arbitration bitrate in CAN FD.

Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Acked-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/dev.c | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c
index 4e20d82b799e..c7a260478749 100644
--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -642,6 +642,14 @@ int open_candev(struct net_device *dev)
 		return -EINVAL;
 	}
 
+	/* For CAN FD the data bitrate has to be >= the arbitration bitrate */
+	if ((priv->ctrlmode & CAN_CTRLMODE_FD) &&
+	    (!priv->data_bittiming.bitrate ||
+	     (priv->data_bittiming.bitrate < priv->bittiming.bitrate))) {
+		netdev_err(dev, "incorrect/missing data bit-timing\n");
+		return -EINVAL;
+	}
+
 	/* Switch carrier on if device was stopped while in bus-off state */
 	if (!netif_carrier_ok(dev))
 		netif_carrier_on(dev);
-- 
cgit v1.2.2


From 8f13dd9612286cc0d38d32ff9543763b7c74f6a5 Mon Sep 17 00:00:00 2001
From: Zoltan Kiss <zoltan.kiss@citrix.com>
Date: Thu, 6 Mar 2014 21:48:23 +0000
Subject: xen-netback: Use skb->cb for pending_idx

Storing the pending_idx at the first byte of the linear buffer never looked
good, skb->cb is a more proper place for this. It also prevents the header to
be directly grant copied there, and we don't have the pending_idx after we
copied the header here, so it's time to change it.
It also introduces helpers for the RX side

Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/xen-netback/netback.c | 42 +++++++++++++++++++++++----------------
 1 file changed, 25 insertions(+), 17 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c
index e5284bca2d90..43ae4bad50c4 100644
--- a/drivers/net/xen-netback/netback.c
+++ b/drivers/net/xen-netback/netback.c
@@ -455,10 +455,12 @@ static void xenvif_add_frag_responses(struct xenvif *vif, int status,
 	}
 }
 
-struct skb_cb_overlay {
+struct xenvif_rx_cb {
 	int meta_slots_used;
 };
 
+#define XENVIF_RX_CB(skb) ((struct xenvif_rx_cb *)(skb)->cb)
+
 void xenvif_kick_thread(struct xenvif *vif)
 {
 	wake_up(&vif->wq);
@@ -474,7 +476,6 @@ static void xenvif_rx_action(struct xenvif *vif)
 	LIST_HEAD(notify);
 	int ret;
 	unsigned long offset;
-	struct skb_cb_overlay *sco;
 	bool need_to_notify = false;
 
 	struct netrx_pending_operations npo = {
@@ -513,9 +514,8 @@ static void xenvif_rx_action(struct xenvif *vif)
 		} else
 			vif->rx_last_skb_slots = 0;
 
-		sco = (struct skb_cb_overlay *)skb->cb;
-		sco->meta_slots_used = xenvif_gop_skb(skb, &npo);
-		BUG_ON(sco->meta_slots_used > max_slots_needed);
+		XENVIF_RX_CB(skb)->meta_slots_used = xenvif_gop_skb(skb, &npo);
+		BUG_ON(XENVIF_RX_CB(skb)->meta_slots_used > max_slots_needed);
 
 		__skb_queue_tail(&rxq, skb);
 	}
@@ -529,7 +529,6 @@ static void xenvif_rx_action(struct xenvif *vif)
 	gnttab_batch_copy(vif->grant_copy_op, npo.copy_prod);
 
 	while ((skb = __skb_dequeue(&rxq)) != NULL) {
-		sco = (struct skb_cb_overlay *)skb->cb;
 
 		if ((1 << vif->meta[npo.meta_cons].gso_type) &
 		    vif->gso_prefix_mask) {
@@ -540,19 +539,21 @@ static void xenvif_rx_action(struct xenvif *vif)
 
 			resp->offset = vif->meta[npo.meta_cons].gso_size;
 			resp->id = vif->meta[npo.meta_cons].id;
-			resp->status = sco->meta_slots_used;
+			resp->status = XENVIF_RX_CB(skb)->meta_slots_used;
 
 			npo.meta_cons++;
-			sco->meta_slots_used--;
+			XENVIF_RX_CB(skb)->meta_slots_used--;
 		}
 
 
 		vif->dev->stats.tx_bytes += skb->len;
 		vif->dev->stats.tx_packets++;
 
-		status = xenvif_check_gop(vif, sco->meta_slots_used, &npo);
+		status = xenvif_check_gop(vif,
+					  XENVIF_RX_CB(skb)->meta_slots_used,
+					  &npo);
 
-		if (sco->meta_slots_used == 1)
+		if (XENVIF_RX_CB(skb)->meta_slots_used == 1)
 			flags = 0;
 		else
 			flags = XEN_NETRXF_more_data;
@@ -589,13 +590,13 @@ static void xenvif_rx_action(struct xenvif *vif)
 
 		xenvif_add_frag_responses(vif, status,
 					  vif->meta + npo.meta_cons + 1,
-					  sco->meta_slots_used);
+					  XENVIF_RX_CB(skb)->meta_slots_used);
 
 		RING_PUSH_RESPONSES_AND_CHECK_NOTIFY(&vif->rx, ret);
 
 		need_to_notify |= !!ret;
 
-		npo.meta_cons += sco->meta_slots_used;
+		npo.meta_cons += XENVIF_RX_CB(skb)->meta_slots_used;
 		dev_kfree_skb(skb);
 	}
 
@@ -772,6 +773,13 @@ static struct page *xenvif_alloc_page(struct xenvif *vif,
 	return page;
 }
 
+
+struct xenvif_tx_cb {
+	u16 pending_idx;
+};
+
+#define XENVIF_TX_CB(skb) ((struct xenvif_tx_cb *)(skb)->cb)
+
 static struct gnttab_copy *xenvif_get_requests(struct xenvif *vif,
 					       struct sk_buff *skb,
 					       struct xen_netif_tx_request *txp,
@@ -779,7 +787,7 @@ static struct gnttab_copy *xenvif_get_requests(struct xenvif *vif,
 {
 	struct skb_shared_info *shinfo = skb_shinfo(skb);
 	skb_frag_t *frags = shinfo->frags;
-	u16 pending_idx = *((u16 *)skb->data);
+	u16 pending_idx = XENVIF_TX_CB(skb)->pending_idx;
 	u16 head_idx = 0;
 	int slot, start;
 	struct page *page;
@@ -897,7 +905,7 @@ static int xenvif_tx_check_gop(struct xenvif *vif,
 			       struct gnttab_copy **gopp)
 {
 	struct gnttab_copy *gop = *gopp;
-	u16 pending_idx = *((u16 *)skb->data);
+	u16 pending_idx = XENVIF_TX_CB(skb)->pending_idx;
 	struct skb_shared_info *shinfo = skb_shinfo(skb);
 	struct pending_tx_info *tx_info;
 	int nr_frags = shinfo->nr_frags;
@@ -944,7 +952,7 @@ static int xenvif_tx_check_gop(struct xenvif *vif,
 			continue;
 
 		/* First error: invalidate header and preceding fragments. */
-		pending_idx = *((u16 *)skb->data);
+		pending_idx = XENVIF_TX_CB(skb)->pending_idx;
 		xenvif_idx_release(vif, pending_idx, XEN_NETIF_RSP_OKAY);
 		for (j = start; j < i; j++) {
 			pending_idx = frag_get_pending_idx(&shinfo->frags[j]);
@@ -1236,7 +1244,7 @@ static unsigned xenvif_tx_build_gops(struct xenvif *vif, int budget)
 		memcpy(&vif->pending_tx_info[pending_idx].req,
 		       &txreq, sizeof(txreq));
 		vif->pending_tx_info[pending_idx].head = index;
-		*((u16 *)skb->data) = pending_idx;
+		XENVIF_TX_CB(skb)->pending_idx = pending_idx;
 
 		__skb_put(skb, data_len);
 
@@ -1283,7 +1291,7 @@ static int xenvif_tx_submit(struct xenvif *vif)
 		u16 pending_idx;
 		unsigned data_len;
 
-		pending_idx = *((u16 *)skb->data);
+		pending_idx = XENVIF_TX_CB(skb)->pending_idx;
 		txp = &vif->pending_tx_info[pending_idx].req;
 
 		/* Check the remap error code. */
-- 
cgit v1.2.2


From 121fa4b77775549c3c5eb41eb335d7dcbb801f90 Mon Sep 17 00:00:00 2001
From: Zoltan Kiss <zoltan.kiss@citrix.com>
Date: Thu, 6 Mar 2014 21:48:24 +0000
Subject: xen-netback: Minor refactoring of netback code

This patch contains a few bits of refactoring before introducing the grant
mapping changes:
- introducing xenvif_tx_pending_slots_available(), as this is used several
  times, and will be used more often
- rename the thread to vifX.Y-guest-rx, to signify it does RX work from the
  guest point of view

Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/xen-netback/common.h    | 23 ++++++++++++++++++++++-
 drivers/net/xen-netback/interface.c |  4 ++--
 drivers/net/xen-netback/netback.c   | 22 +++-------------------
 3 files changed, 27 insertions(+), 22 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/xen-netback/common.h b/drivers/net/xen-netback/common.h
index ae413a2cbee7..9d3584545e5d 100644
--- a/drivers/net/xen-netback/common.h
+++ b/drivers/net/xen-netback/common.h
@@ -108,6 +108,15 @@ struct xenvif_rx_meta {
  */
 #define MAX_GRANT_COPY_OPS (MAX_SKB_FRAGS * XEN_NETIF_RX_RING_SIZE)
 
+#define NETBACK_INVALID_HANDLE -1
+
+/* To avoid confusion, we define XEN_NETBK_LEGACY_SLOTS_MAX indicating
+ * the maximum slots a valid packet can use. Now this value is defined
+ * to be XEN_NETIF_NR_SLOTS_MIN, which is supposed to be supported by
+ * all backend.
+ */
+#define XEN_NETBK_LEGACY_SLOTS_MAX XEN_NETIF_NR_SLOTS_MIN
+
 struct xenvif {
 	/* Unique identifier for this interface. */
 	domid_t          domid;
@@ -216,7 +225,7 @@ void xenvif_carrier_off(struct xenvif *vif);
 
 int xenvif_tx_action(struct xenvif *vif, int budget);
 
-int xenvif_kthread(void *data);
+int xenvif_kthread_guest_rx(void *data);
 void xenvif_kick_thread(struct xenvif *vif);
 
 /* Determine whether the needed number of slots (req) are available,
@@ -226,6 +235,18 @@ bool xenvif_rx_ring_slots_available(struct xenvif *vif, int needed);
 
 void xenvif_stop_queue(struct xenvif *vif);
 
+static inline pending_ring_idx_t nr_pending_reqs(struct xenvif *vif)
+{
+	return MAX_PENDING_REQS -
+		vif->pending_prod + vif->pending_cons;
+}
+
+static inline bool xenvif_tx_pending_slots_available(struct xenvif *vif)
+{
+	return nr_pending_reqs(vif) + XEN_NETBK_LEGACY_SLOTS_MAX
+		< MAX_PENDING_REQS;
+}
+
 extern bool separate_tx_rx_irq;
 
 #endif /* __XEN_NETBACK__COMMON_H__ */
diff --git a/drivers/net/xen-netback/interface.c b/drivers/net/xen-netback/interface.c
index 7669d49a67e2..bc32627a22cb 100644
--- a/drivers/net/xen-netback/interface.c
+++ b/drivers/net/xen-netback/interface.c
@@ -421,8 +421,8 @@ int xenvif_connect(struct xenvif *vif, unsigned long tx_ring_ref,
 		disable_irq(vif->rx_irq);
 	}
 
-	task = kthread_create(xenvif_kthread,
-			      (void *)vif, "%s", vif->dev->name);
+	task = kthread_create(xenvif_kthread_guest_rx,
+			      (void *)vif, "%s-guest-rx", vif->dev->name);
 	if (IS_ERR(task)) {
 		pr_warn("Could not allocate kthread for %s\n", vif->dev->name);
 		err = PTR_ERR(task);
diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c
index 43ae4bad50c4..715d810124eb 100644
--- a/drivers/net/xen-netback/netback.c
+++ b/drivers/net/xen-netback/netback.c
@@ -62,14 +62,6 @@ module_param(separate_tx_rx_irq, bool, 0644);
 static unsigned int fatal_skb_slots = FATAL_SKB_SLOTS_DEFAULT;
 module_param(fatal_skb_slots, uint, 0444);
 
-/*
- * To avoid confusion, we define XEN_NETBK_LEGACY_SLOTS_MAX indicating
- * the maximum slots a valid packet can use. Now this value is defined
- * to be XEN_NETIF_NR_SLOTS_MIN, which is supposed to be supported by
- * all backend.
- */
-#define XEN_NETBK_LEGACY_SLOTS_MAX XEN_NETIF_NR_SLOTS_MIN
-
 /*
  * If head != INVALID_PENDING_RING_IDX, it means this tx request is head of
  * one or more merged tx requests, otherwise it is the continuation of
@@ -131,12 +123,6 @@ static inline pending_ring_idx_t pending_index(unsigned i)
 	return i & (MAX_PENDING_REQS-1);
 }
 
-static inline pending_ring_idx_t nr_pending_reqs(struct xenvif *vif)
-{
-	return MAX_PENDING_REQS -
-		vif->pending_prod + vif->pending_cons;
-}
-
 bool xenvif_rx_ring_slots_available(struct xenvif *vif, int needed)
 {
 	RING_IDX prod, cons;
@@ -1116,8 +1102,7 @@ static unsigned xenvif_tx_build_gops(struct xenvif *vif, int budget)
 	struct sk_buff *skb;
 	int ret;
 
-	while ((nr_pending_reqs(vif) + XEN_NETBK_LEGACY_SLOTS_MAX
-		< MAX_PENDING_REQS) &&
+	while (xenvif_tx_pending_slots_available(vif) &&
 	       (skb_queue_len(&vif->tx_queue) < budget)) {
 		struct xen_netif_tx_request txreq;
 		struct xen_netif_tx_request txfrags[XEN_NETBK_LEGACY_SLOTS_MAX];
@@ -1487,8 +1472,7 @@ static inline int tx_work_todo(struct xenvif *vif)
 {
 
 	if (likely(RING_HAS_UNCONSUMED_REQUESTS(&vif->tx)) &&
-	    (nr_pending_reqs(vif) + XEN_NETBK_LEGACY_SLOTS_MAX
-	     < MAX_PENDING_REQS))
+	    xenvif_tx_pending_slots_available(vif))
 		return 1;
 
 	return 0;
@@ -1551,7 +1535,7 @@ static void xenvif_start_queue(struct xenvif *vif)
 		netif_wake_queue(vif->dev);
 }
 
-int xenvif_kthread(void *data)
+int xenvif_kthread_guest_rx(void *data)
 {
 	struct xenvif *vif = data;
 	struct sk_buff *skb;
-- 
cgit v1.2.2


From 3e2234b3149f66bc4be2343a3a0f637d922e4a36 Mon Sep 17 00:00:00 2001
From: Zoltan Kiss <zoltan.kiss@citrix.com>
Date: Thu, 6 Mar 2014 21:48:25 +0000
Subject: xen-netback: Handle foreign mapped pages on the guest RX path

RX path need to know if the SKB fragments are stored on pages from another
domain.
Logically this patch should be after introducing the grant mapping itself, as
it makes sense only after that. But to keep bisectability, I moved it here. It
shouldn't change any functionality here. xenvif_zerocopy_callback and
ubuf_to_vif are just stubs here, they will be introduced properly later on.

Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/xen-netback/common.h  |  3 +++
 drivers/net/xen-netback/netback.c | 48 +++++++++++++++++++++++++++++++++++----
 2 files changed, 46 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/xen-netback/common.h b/drivers/net/xen-netback/common.h
index 9d3584545e5d..8f264df8818a 100644
--- a/drivers/net/xen-netback/common.h
+++ b/drivers/net/xen-netback/common.h
@@ -247,6 +247,9 @@ static inline bool xenvif_tx_pending_slots_available(struct xenvif *vif)
 		< MAX_PENDING_REQS;
 }
 
+/* Callback from stack when TX packet can be released */
+void xenvif_zerocopy_callback(struct ubuf_info *ubuf, bool zerocopy_success);
+
 extern bool separate_tx_rx_irq;
 
 #endif /* __XEN_NETBACK__COMMON_H__ */
diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c
index 715d810124eb..e9391badfa4a 100644
--- a/drivers/net/xen-netback/netback.c
+++ b/drivers/net/xen-netback/netback.c
@@ -101,6 +101,10 @@ static inline unsigned long idx_to_kaddr(struct xenvif *vif,
 	return (unsigned long)pfn_to_kaddr(idx_to_pfn(vif, idx));
 }
 
+static inline struct xenvif* ubuf_to_vif(struct ubuf_info *ubuf)
+{
+	return NULL;
+}
 /* This is a miniumum size for the linear area to avoid lots of
  * calls to __pskb_pull_tail() as we set up checksum offsets. The
  * value 128 was chosen as it covers all IPv4 and most likely
@@ -221,7 +225,9 @@ static struct xenvif_rx_meta *get_next_rx_buffer(struct xenvif *vif,
 static void xenvif_gop_frag_copy(struct xenvif *vif, struct sk_buff *skb,
 				 struct netrx_pending_operations *npo,
 				 struct page *page, unsigned long size,
-				 unsigned long offset, int *head)
+				 unsigned long offset, int *head,
+				 struct xenvif *foreign_vif,
+				 grant_ref_t foreign_gref)
 {
 	struct gnttab_copy *copy_gop;
 	struct xenvif_rx_meta *meta;
@@ -263,8 +269,15 @@ static void xenvif_gop_frag_copy(struct xenvif *vif, struct sk_buff *skb,
 		copy_gop->flags = GNTCOPY_dest_gref;
 		copy_gop->len = bytes;
 
-		copy_gop->source.domid = DOMID_SELF;
-		copy_gop->source.u.gmfn = virt_to_mfn(page_address(page));
+		if (foreign_vif) {
+			copy_gop->source.domid = foreign_vif->domid;
+			copy_gop->source.u.ref = foreign_gref;
+			copy_gop->flags |= GNTCOPY_source_gref;
+		} else {
+			copy_gop->source.domid = DOMID_SELF;
+			copy_gop->source.u.gmfn =
+				virt_to_mfn(page_address(page));
+		}
 		copy_gop->source.offset = offset;
 
 		copy_gop->dest.domid = vif->domid;
@@ -325,6 +338,9 @@ static int xenvif_gop_skb(struct sk_buff *skb,
 	int old_meta_prod;
 	int gso_type;
 	int gso_size;
+	struct ubuf_info *ubuf = skb_shinfo(skb)->destructor_arg;
+	grant_ref_t foreign_grefs[MAX_SKB_FRAGS];
+	struct xenvif *foreign_vif = NULL;
 
 	old_meta_prod = npo->meta_prod;
 
@@ -365,6 +381,19 @@ static int xenvif_gop_skb(struct sk_buff *skb,
 	npo->copy_off = 0;
 	npo->copy_gref = req->gref;
 
+	if ((skb_shinfo(skb)->tx_flags & SKBTX_DEV_ZEROCOPY) &&
+		 (ubuf->callback == &xenvif_zerocopy_callback)) {
+		int i = 0;
+		foreign_vif = ubuf_to_vif(ubuf);
+
+		do {
+			u16 pending_idx = ubuf->desc;
+			foreign_grefs[i++] =
+				foreign_vif->pending_tx_info[pending_idx].req.gref;
+			ubuf = (struct ubuf_info *) ubuf->ctx;
+		} while (ubuf);
+	}
+
 	data = skb->data;
 	while (data < skb_tail_pointer(skb)) {
 		unsigned int offset = offset_in_page(data);
@@ -374,7 +403,9 @@ static int xenvif_gop_skb(struct sk_buff *skb,
 			len = skb_tail_pointer(skb) - data;
 
 		xenvif_gop_frag_copy(vif, skb, npo,
-				     virt_to_page(data), len, offset, &head);
+				     virt_to_page(data), len, offset, &head,
+				     NULL,
+				     0);
 		data += len;
 	}
 
@@ -383,7 +414,9 @@ static int xenvif_gop_skb(struct sk_buff *skb,
 				     skb_frag_page(&skb_shinfo(skb)->frags[i]),
 				     skb_frag_size(&skb_shinfo(skb)->frags[i]),
 				     skb_shinfo(skb)->frags[i].page_offset,
-				     &head);
+				     &head,
+				     foreign_vif,
+				     foreign_grefs[i]);
 	}
 
 	return npo->meta_prod - old_meta_prod;
@@ -1351,6 +1384,11 @@ static int xenvif_tx_submit(struct xenvif *vif)
 	return work_done;
 }
 
+void xenvif_zerocopy_callback(struct ubuf_info *ubuf, bool zerocopy_success)
+{
+	return;
+}
+
 /* Called after netfront has transmitted */
 int xenvif_tx_action(struct xenvif *vif, int budget)
 {
-- 
cgit v1.2.2


From f53c3fe8dad725b014e9c7682720d8e3e2a8a5b3 Mon Sep 17 00:00:00 2001
From: Zoltan Kiss <zoltan.kiss@citrix.com>
Date: Thu, 6 Mar 2014 21:48:26 +0000
Subject: xen-netback: Introduce TX grant mapping

This patch introduces grant mapping on netback TX path. It replaces grant copy
operations, ditching grant copy coalescing along the way. Another solution for
copy coalescing is introduced in "xen-netback: Handle guests with too many
frags", older guests and Windows can broke before that patch applies.
There is a callback (xenvif_zerocopy_callback) from core stack to release the
slots back to the guests when kfree_skb or skb_orphan_frags called. It feeds a
separate dealloc thread, as scheduling NAPI instance from there is inefficient,
therefore we can't do dealloc from the instance.

Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/xen-netback/common.h    |  39 +++-
 drivers/net/xen-netback/interface.c |  65 +++++-
 drivers/net/xen-netback/netback.c   | 432 +++++++++++++++++++++++-------------
 3 files changed, 371 insertions(+), 165 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/xen-netback/common.h b/drivers/net/xen-netback/common.h
index 8f264df8818a..5a991266a394 100644
--- a/drivers/net/xen-netback/common.h
+++ b/drivers/net/xen-netback/common.h
@@ -79,6 +79,17 @@ struct pending_tx_info {
 				  * if it is head of one or more tx
 				  * reqs
 				  */
+	/* Callback data for released SKBs. The callback is always
+	 * xenvif_zerocopy_callback, desc contains the pending_idx, which is
+	 * also an index in pending_tx_info array. It is initialized in
+	 * xenvif_alloc and it never changes.
+	 * skb_shinfo(skb)->destructor_arg points to the first mapped slot's
+	 * callback_struct in this array of struct pending_tx_info's, then ctx
+	 * to the next, or NULL if there is no more slot for this skb.
+	 * ubuf_to_vif is a helper which finds the struct xenvif from a pointer
+	 * to this field.
+	 */
+	struct ubuf_info callback_struct;
 };
 
 #define XEN_NETIF_TX_RING_SIZE __CONST_RING_SIZE(xen_netif_tx, PAGE_SIZE)
@@ -135,13 +146,31 @@ struct xenvif {
 	pending_ring_idx_t pending_cons;
 	u16 pending_ring[MAX_PENDING_REQS];
 	struct pending_tx_info pending_tx_info[MAX_PENDING_REQS];
+	grant_handle_t grant_tx_handle[MAX_PENDING_REQS];
 
 	/* Coalescing tx requests before copying makes number of grant
 	 * copy ops greater or equal to number of slots required. In
 	 * worst case a tx request consumes 2 gnttab_copy.
 	 */
 	struct gnttab_copy tx_copy_ops[2*MAX_PENDING_REQS];
-
+	struct gnttab_map_grant_ref tx_map_ops[MAX_PENDING_REQS];
+	struct gnttab_unmap_grant_ref tx_unmap_ops[MAX_PENDING_REQS];
+	/* passed to gnttab_[un]map_refs with pages under (un)mapping */
+	struct page *pages_to_map[MAX_PENDING_REQS];
+	struct page *pages_to_unmap[MAX_PENDING_REQS];
+
+	/* This prevents zerocopy callbacks  to race over dealloc_ring */
+	spinlock_t callback_lock;
+	/* This prevents dealloc thread and NAPI instance to race over response
+	 * creation and pending_ring in xenvif_idx_release. In xenvif_tx_err
+	 * it only protect response creation
+	 */
+	spinlock_t response_lock;
+	pending_ring_idx_t dealloc_prod;
+	pending_ring_idx_t dealloc_cons;
+	u16 dealloc_ring[MAX_PENDING_REQS];
+	struct task_struct *dealloc_task;
+	wait_queue_head_t dealloc_wq;
 
 	/* Use kthread for guest RX */
 	struct task_struct *task;
@@ -228,6 +257,8 @@ int xenvif_tx_action(struct xenvif *vif, int budget);
 int xenvif_kthread_guest_rx(void *data);
 void xenvif_kick_thread(struct xenvif *vif);
 
+int xenvif_dealloc_kthread(void *data);
+
 /* Determine whether the needed number of slots (req) are available,
  * and set req_event if not.
  */
@@ -235,6 +266,12 @@ bool xenvif_rx_ring_slots_available(struct xenvif *vif, int needed);
 
 void xenvif_stop_queue(struct xenvif *vif);
 
+/* Callback from stack when TX packet can be released */
+void xenvif_zerocopy_callback(struct ubuf_info *ubuf, bool zerocopy_success);
+
+/* Unmap a pending page and release it back to the guest */
+void xenvif_idx_unmap(struct xenvif *vif, u16 pending_idx);
+
 static inline pending_ring_idx_t nr_pending_reqs(struct xenvif *vif)
 {
 	return MAX_PENDING_REQS -
diff --git a/drivers/net/xen-netback/interface.c b/drivers/net/xen-netback/interface.c
index bc32627a22cb..1fe9fe523cc8 100644
--- a/drivers/net/xen-netback/interface.c
+++ b/drivers/net/xen-netback/interface.c
@@ -38,6 +38,7 @@
 
 #include <xen/events.h>
 #include <asm/xen/hypercall.h>
+#include <xen/balloon.h>
 
 #define XENVIF_QUEUE_LENGTH 32
 #define XENVIF_NAPI_WEIGHT  64
@@ -87,7 +88,8 @@ static int xenvif_poll(struct napi_struct *napi, int budget)
 		local_irq_save(flags);
 
 		RING_FINAL_CHECK_FOR_REQUESTS(&vif->tx, more_to_do);
-		if (!more_to_do)
+		if (!(more_to_do &&
+		      xenvif_tx_pending_slots_available(vif)))
 			__napi_complete(napi);
 
 		local_irq_restore(flags);
@@ -121,7 +123,9 @@ static int xenvif_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	BUG_ON(skb->dev != dev);
 
 	/* Drop the packet if vif is not ready */
-	if (vif->task == NULL || !xenvif_schedulable(vif))
+	if (vif->task == NULL ||
+	    vif->dealloc_task == NULL ||
+	    !xenvif_schedulable(vif))
 		goto drop;
 
 	/* At best we'll need one slot for the header and one for each
@@ -343,8 +347,26 @@ struct xenvif *xenvif_alloc(struct device *parent, domid_t domid,
 	vif->pending_prod = MAX_PENDING_REQS;
 	for (i = 0; i < MAX_PENDING_REQS; i++)
 		vif->pending_ring[i] = i;
-	for (i = 0; i < MAX_PENDING_REQS; i++)
-		vif->mmap_pages[i] = NULL;
+	spin_lock_init(&vif->callback_lock);
+	spin_lock_init(&vif->response_lock);
+	/* If ballooning is disabled, this will consume real memory, so you
+	 * better enable it. The long term solution would be to use just a
+	 * bunch of valid page descriptors, without dependency on ballooning
+	 */
+	err = alloc_xenballooned_pages(MAX_PENDING_REQS,
+				       vif->mmap_pages,
+				       false);
+	if (err) {
+		netdev_err(dev, "Could not reserve mmap_pages\n");
+		return ERR_PTR(-ENOMEM);
+	}
+	for (i = 0; i < MAX_PENDING_REQS; i++) {
+		vif->pending_tx_info[i].callback_struct = (struct ubuf_info)
+			{ .callback = xenvif_zerocopy_callback,
+			  .ctx = NULL,
+			  .desc = i };
+		vif->grant_tx_handle[i] = NETBACK_INVALID_HANDLE;
+	}
 
 	/*
 	 * Initialise a dummy MAC address. We choose the numerically
@@ -382,12 +404,14 @@ int xenvif_connect(struct xenvif *vif, unsigned long tx_ring_ref,
 
 	BUG_ON(vif->tx_irq);
 	BUG_ON(vif->task);
+	BUG_ON(vif->dealloc_task);
 
 	err = xenvif_map_frontend_rings(vif, tx_ring_ref, rx_ring_ref);
 	if (err < 0)
 		goto err;
 
 	init_waitqueue_head(&vif->wq);
+	init_waitqueue_head(&vif->dealloc_wq);
 
 	if (tx_evtchn == rx_evtchn) {
 		/* feature-split-event-channels == 0 */
@@ -431,6 +455,16 @@ int xenvif_connect(struct xenvif *vif, unsigned long tx_ring_ref,
 
 	vif->task = task;
 
+	task = kthread_create(xenvif_dealloc_kthread,
+			      (void *)vif, "%s-dealloc", vif->dev->name);
+	if (IS_ERR(task)) {
+		pr_warn("Could not allocate kthread for %s\n", vif->dev->name);
+		err = PTR_ERR(task);
+		goto err_rx_unbind;
+	}
+
+	vif->dealloc_task = task;
+
 	rtnl_lock();
 	if (!vif->can_sg && vif->dev->mtu > ETH_DATA_LEN)
 		dev_set_mtu(vif->dev, ETH_DATA_LEN);
@@ -441,6 +475,7 @@ int xenvif_connect(struct xenvif *vif, unsigned long tx_ring_ref,
 	rtnl_unlock();
 
 	wake_up_process(vif->task);
+	wake_up_process(vif->dealloc_task);
 
 	return 0;
 
@@ -478,6 +513,11 @@ void xenvif_disconnect(struct xenvif *vif)
 		vif->task = NULL;
 	}
 
+	if (vif->dealloc_task) {
+		kthread_stop(vif->dealloc_task);
+		vif->dealloc_task = NULL;
+	}
+
 	if (vif->tx_irq) {
 		if (vif->tx_irq == vif->rx_irq)
 			unbind_from_irqhandler(vif->tx_irq, vif);
@@ -493,6 +533,23 @@ void xenvif_disconnect(struct xenvif *vif)
 
 void xenvif_free(struct xenvif *vif)
 {
+	int i, unmap_timeout = 0;
+
+	for (i = 0; i < MAX_PENDING_REQS; ++i) {
+		if (vif->grant_tx_handle[i] != NETBACK_INVALID_HANDLE) {
+			unmap_timeout++;
+			schedule_timeout(msecs_to_jiffies(1000));
+			if (unmap_timeout > 9 &&
+			    net_ratelimit())
+				netdev_err(vif->dev,
+					   "Page still granted! Index: %x\n",
+					   i);
+			i = -1;
+		}
+	}
+
+	free_xenballooned_pages(MAX_PENDING_REQS, vif->mmap_pages);
+
 	netif_napi_del(&vif->napi);
 
 	unregister_netdev(vif->dev);
diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c
index e9391badfa4a..cb29134147d1 100644
--- a/drivers/net/xen-netback/netback.c
+++ b/drivers/net/xen-netback/netback.c
@@ -101,10 +101,18 @@ static inline unsigned long idx_to_kaddr(struct xenvif *vif,
 	return (unsigned long)pfn_to_kaddr(idx_to_pfn(vif, idx));
 }
 
+/* Find the containing VIF's structure from a pointer in pending_tx_info array
+ */
 static inline struct xenvif* ubuf_to_vif(struct ubuf_info *ubuf)
 {
-	return NULL;
+	u16 pending_idx = ubuf->desc;
+	struct pending_tx_info *temp =
+		container_of(ubuf, struct pending_tx_info, callback_struct);
+	return container_of(temp - pending_idx,
+			    struct xenvif,
+			    pending_tx_info[0]);
 }
+
 /* This is a miniumum size for the linear area to avoid lots of
  * calls to __pskb_pull_tail() as we set up checksum offsets. The
  * value 128 was chosen as it covers all IPv4 and most likely
@@ -665,9 +673,12 @@ static void xenvif_tx_err(struct xenvif *vif,
 			  struct xen_netif_tx_request *txp, RING_IDX end)
 {
 	RING_IDX cons = vif->tx.req_cons;
+	unsigned long flags;
 
 	do {
+		spin_lock_irqsave(&vif->response_lock, flags);
 		make_tx_response(vif, txp, XEN_NETIF_RSP_ERROR);
+		spin_unlock_irqrestore(&vif->response_lock, flags);
 		if (cons == end)
 			break;
 		txp = RING_GET_REQUEST(&vif->tx, cons++);
@@ -799,10 +810,24 @@ struct xenvif_tx_cb {
 
 #define XENVIF_TX_CB(skb) ((struct xenvif_tx_cb *)(skb)->cb)
 
-static struct gnttab_copy *xenvif_get_requests(struct xenvif *vif,
-					       struct sk_buff *skb,
-					       struct xen_netif_tx_request *txp,
-					       struct gnttab_copy *gop)
+static inline void xenvif_tx_create_gop(struct xenvif *vif,
+					u16 pending_idx,
+					struct xen_netif_tx_request *txp,
+					struct gnttab_map_grant_ref *gop)
+{
+	vif->pages_to_map[gop-vif->tx_map_ops] = vif->mmap_pages[pending_idx];
+	gnttab_set_map_op(gop, idx_to_kaddr(vif, pending_idx),
+			  GNTMAP_host_map | GNTMAP_readonly,
+			  txp->gref, vif->domid);
+
+	memcpy(&vif->pending_tx_info[pending_idx].req, txp,
+	       sizeof(*txp));
+}
+
+static struct gnttab_map_grant_ref *xenvif_get_requests(struct xenvif *vif,
+							struct sk_buff *skb,
+							struct xen_netif_tx_request *txp,
+							struct gnttab_map_grant_ref *gop)
 {
 	struct skb_shared_info *shinfo = skb_shinfo(skb);
 	skb_frag_t *frags = shinfo->frags;
@@ -823,83 +848,12 @@ static struct gnttab_copy *xenvif_get_requests(struct xenvif *vif,
 	/* Skip first skb fragment if it is on same page as header fragment. */
 	start = (frag_get_pending_idx(&shinfo->frags[0]) == pending_idx);
 
-	/* Coalesce tx requests, at this point the packet passed in
-	 * should be <= 64K. Any packets larger than 64K have been
-	 * handled in xenvif_count_requests().
-	 */
-	for (shinfo->nr_frags = slot = start; slot < nr_slots;
-	     shinfo->nr_frags++) {
-		struct pending_tx_info *pending_tx_info =
-			vif->pending_tx_info;
-
-		page = alloc_page(GFP_ATOMIC|__GFP_COLD);
-		if (!page)
-			goto err;
-
-		dst_offset = 0;
-		first = NULL;
-		while (dst_offset < PAGE_SIZE && slot < nr_slots) {
-			gop->flags = GNTCOPY_source_gref;
-
-			gop->source.u.ref = txp->gref;
-			gop->source.domid = vif->domid;
-			gop->source.offset = txp->offset;
-
-			gop->dest.domid = DOMID_SELF;
-
-			gop->dest.offset = dst_offset;
-			gop->dest.u.gmfn = virt_to_mfn(page_address(page));
-
-			if (dst_offset + txp->size > PAGE_SIZE) {
-				/* This page can only merge a portion
-				 * of tx request. Do not increment any
-				 * pointer / counter here. The txp
-				 * will be dealt with in future
-				 * rounds, eventually hitting the
-				 * `else` branch.
-				 */
-				gop->len = PAGE_SIZE - dst_offset;
-				txp->offset += gop->len;
-				txp->size -= gop->len;
-				dst_offset += gop->len; /* quit loop */
-			} else {
-				/* This tx request can be merged in the page */
-				gop->len = txp->size;
-				dst_offset += gop->len;
-
+	for (shinfo->nr_frags = start; shinfo->nr_frags < nr_slots;
+	     shinfo->nr_frags++, txp++, gop++) {
 				index = pending_index(vif->pending_cons++);
-
 				pending_idx = vif->pending_ring[index];
-
-				memcpy(&pending_tx_info[pending_idx].req, txp,
-				       sizeof(*txp));
-
-				/* Poison these fields, corresponding
-				 * fields for head tx req will be set
-				 * to correct values after the loop.
-				 */
-				vif->mmap_pages[pending_idx] = (void *)(~0UL);
-				pending_tx_info[pending_idx].head =
-					INVALID_PENDING_RING_IDX;
-
-				if (!first) {
-					first = &pending_tx_info[pending_idx];
-					start_idx = index;
-					head_idx = pending_idx;
-				}
-
-				txp++;
-				slot++;
-			}
-
-			gop++;
-		}
-
-		first->req.offset = 0;
-		first->req.size = dst_offset;
-		first->head = start_idx;
-		vif->mmap_pages[head_idx] = page;
-		frag_set_pending_idx(&frags[shinfo->nr_frags], head_idx);
+		xenvif_tx_create_gop(vif, pending_idx, txp, gop);
+		frag_set_pending_idx(&frags[shinfo->nr_frags], pending_idx);
 	}
 
 	BUG_ON(shinfo->nr_frags > MAX_SKB_FRAGS);
@@ -919,11 +873,38 @@ err:
 	return NULL;
 }
 
+static inline void xenvif_grant_handle_set(struct xenvif *vif,
+					   u16 pending_idx,
+					   grant_handle_t handle)
+{
+	if (unlikely(vif->grant_tx_handle[pending_idx] !=
+		     NETBACK_INVALID_HANDLE)) {
+		netdev_err(vif->dev,
+			   "Trying to overwrite active handle! pending_idx: %x\n",
+			   pending_idx);
+		BUG();
+	}
+	vif->grant_tx_handle[pending_idx] = handle;
+}
+
+static inline void xenvif_grant_handle_reset(struct xenvif *vif,
+					     u16 pending_idx)
+{
+	if (unlikely(vif->grant_tx_handle[pending_idx] ==
+		     NETBACK_INVALID_HANDLE)) {
+		netdev_err(vif->dev,
+			   "Trying to unmap invalid handle! pending_idx: %x\n",
+			   pending_idx);
+		BUG();
+	}
+	vif->grant_tx_handle[pending_idx] = NETBACK_INVALID_HANDLE;
+}
+
 static int xenvif_tx_check_gop(struct xenvif *vif,
 			       struct sk_buff *skb,
-			       struct gnttab_copy **gopp)
+			       struct gnttab_map_grant_ref **gopp)
 {
-	struct gnttab_copy *gop = *gopp;
+	struct gnttab_map_grant_ref *gop = *gopp;
 	u16 pending_idx = XENVIF_TX_CB(skb)->pending_idx;
 	struct skb_shared_info *shinfo = skb_shinfo(skb);
 	struct pending_tx_info *tx_info;
@@ -935,6 +916,8 @@ static int xenvif_tx_check_gop(struct xenvif *vif,
 	err = gop->status;
 	if (unlikely(err))
 		xenvif_idx_release(vif, pending_idx, XEN_NETIF_RSP_ERROR);
+	else
+		xenvif_grant_handle_set(vif, pending_idx , gop->handle);
 
 	/* Skip first skb fragment if it is on same page as header fragment. */
 	start = (frag_get_pending_idx(&shinfo->frags[0]) == pending_idx);
@@ -948,18 +931,13 @@ static int xenvif_tx_check_gop(struct xenvif *vif,
 		head = tx_info->head;
 
 		/* Check error status: if okay then remember grant handle. */
-		do {
 			newerr = (++gop)->status;
-			if (newerr)
-				break;
-			peek = vif->pending_ring[pending_index(++head)];
-		} while (!pending_tx_is_head(vif, peek));
 
 		if (likely(!newerr)) {
+			xenvif_grant_handle_set(vif, pending_idx , gop->handle);
 			/* Had a previous error? Invalidate this fragment. */
 			if (unlikely(err))
-				xenvif_idx_release(vif, pending_idx,
-						   XEN_NETIF_RSP_OKAY);
+				xenvif_idx_unmap(vif, pending_idx);
 			continue;
 		}
 
@@ -972,11 +950,10 @@ static int xenvif_tx_check_gop(struct xenvif *vif,
 
 		/* First error: invalidate header and preceding fragments. */
 		pending_idx = XENVIF_TX_CB(skb)->pending_idx;
-		xenvif_idx_release(vif, pending_idx, XEN_NETIF_RSP_OKAY);
+		xenvif_idx_unmap(vif, pending_idx);
 		for (j = start; j < i; j++) {
 			pending_idx = frag_get_pending_idx(&shinfo->frags[j]);
-			xenvif_idx_release(vif, pending_idx,
-					   XEN_NETIF_RSP_OKAY);
+			xenvif_idx_unmap(vif, pending_idx);
 		}
 
 		/* Remember the error: invalidate all subsequent fragments. */
@@ -992,6 +969,10 @@ static void xenvif_fill_frags(struct xenvif *vif, struct sk_buff *skb)
 	struct skb_shared_info *shinfo = skb_shinfo(skb);
 	int nr_frags = shinfo->nr_frags;
 	int i;
+	u16 prev_pending_idx = INVALID_PENDING_IDX;
+
+	if (skb_shinfo(skb)->destructor_arg)
+		prev_pending_idx = XENVIF_TX_CB(skb)->pending_idx;
 
 	for (i = 0; i < nr_frags; i++) {
 		skb_frag_t *frag = shinfo->frags + i;
@@ -1001,6 +982,17 @@ static void xenvif_fill_frags(struct xenvif *vif, struct sk_buff *skb)
 
 		pending_idx = frag_get_pending_idx(frag);
 
+		/* If this is not the first frag, chain it to the previous*/
+		if (unlikely(prev_pending_idx == INVALID_PENDING_IDX))
+			skb_shinfo(skb)->destructor_arg =
+				&vif->pending_tx_info[pending_idx].callback_struct;
+		else if (likely(pending_idx != prev_pending_idx))
+			vif->pending_tx_info[prev_pending_idx].callback_struct.ctx =
+				&(vif->pending_tx_info[pending_idx].callback_struct);
+
+		vif->pending_tx_info[pending_idx].callback_struct.ctx = NULL;
+		prev_pending_idx = pending_idx;
+
 		txp = &vif->pending_tx_info[pending_idx].req;
 		page = virt_to_page(idx_to_kaddr(vif, pending_idx));
 		__skb_fill_page_desc(skb, i, page, txp->offset, txp->size);
@@ -1008,10 +1000,15 @@ static void xenvif_fill_frags(struct xenvif *vif, struct sk_buff *skb)
 		skb->data_len += txp->size;
 		skb->truesize += txp->size;
 
-		/* Take an extra reference to offset xenvif_idx_release */
+		/* Take an extra reference to offset network stack's put_page */
 		get_page(vif->mmap_pages[pending_idx]);
-		xenvif_idx_release(vif, pending_idx, XEN_NETIF_RSP_OKAY);
 	}
+	/* FIXME: __skb_fill_page_desc set this to true because page->pfmemalloc
+	 * overlaps with "index", and "mapping" is not set. I think mapping
+	 * should be set. If delivered to local stack, it would drop this
+	 * skb in sk_filter unless the socket has the right to use it.
+	 */
+	skb->pfmemalloc	= false;
 }
 
 static int xenvif_get_extras(struct xenvif *vif,
@@ -1131,7 +1128,7 @@ static bool tx_credit_exceeded(struct xenvif *vif, unsigned size)
 
 static unsigned xenvif_tx_build_gops(struct xenvif *vif, int budget)
 {
-	struct gnttab_copy *gop = vif->tx_copy_ops, *request_gop;
+	struct gnttab_map_grant_ref *gop = vif->tx_map_ops, *request_gop;
 	struct sk_buff *skb;
 	int ret;
 
@@ -1238,30 +1235,10 @@ static unsigned xenvif_tx_build_gops(struct xenvif *vif, int budget)
 			}
 		}
 
-		/* XXX could copy straight to head */
-		page = xenvif_alloc_page(vif, pending_idx);
-		if (!page) {
-			kfree_skb(skb);
-			xenvif_tx_err(vif, &txreq, idx);
-			break;
-		}
-
-		gop->source.u.ref = txreq.gref;
-		gop->source.domid = vif->domid;
-		gop->source.offset = txreq.offset;
-
-		gop->dest.u.gmfn = virt_to_mfn(page_address(page));
-		gop->dest.domid = DOMID_SELF;
-		gop->dest.offset = txreq.offset;
-
-		gop->len = txreq.size;
-		gop->flags = GNTCOPY_source_gref;
+		xenvif_tx_create_gop(vif, pending_idx, &txreq, gop);
 
 		gop++;
 
-		memcpy(&vif->pending_tx_info[pending_idx].req,
-		       &txreq, sizeof(txreq));
-		vif->pending_tx_info[pending_idx].head = index;
 		XENVIF_TX_CB(skb)->pending_idx = pending_idx;
 
 		__skb_put(skb, data_len);
@@ -1290,17 +1267,17 @@ static unsigned xenvif_tx_build_gops(struct xenvif *vif, int budget)
 
 		vif->tx.req_cons = idx;
 
-		if ((gop-vif->tx_copy_ops) >= ARRAY_SIZE(vif->tx_copy_ops))
+		if ((gop-vif->tx_map_ops) >= ARRAY_SIZE(vif->tx_map_ops))
 			break;
 	}
 
-	return gop - vif->tx_copy_ops;
+	return gop - vif->tx_map_ops;
 }
 
 
 static int xenvif_tx_submit(struct xenvif *vif)
 {
-	struct gnttab_copy *gop = vif->tx_copy_ops;
+	struct gnttab_map_grant_ref *gop = vif->tx_map_ops;
 	struct sk_buff *skb;
 	int work_done = 0;
 
@@ -1324,14 +1301,17 @@ static int xenvif_tx_submit(struct xenvif *vif)
 		memcpy(skb->data,
 		       (void *)(idx_to_kaddr(vif, pending_idx)|txp->offset),
 		       data_len);
+		vif->pending_tx_info[pending_idx].callback_struct.ctx = NULL;
 		if (data_len < txp->size) {
 			/* Append the packet payload as a fragment. */
 			txp->offset += data_len;
 			txp->size -= data_len;
+			skb_shinfo(skb)->destructor_arg =
+				&vif->pending_tx_info[pending_idx].callback_struct;
 		} else {
 			/* Schedule a response immediately. */
-			xenvif_idx_release(vif, pending_idx,
-					   XEN_NETIF_RSP_OKAY);
+			skb_shinfo(skb)->destructor_arg = NULL;
+			xenvif_idx_unmap(vif, pending_idx);
 		}
 
 		if (txp->flags & XEN_NETTXF_csum_blank)
@@ -1353,6 +1333,9 @@ static int xenvif_tx_submit(struct xenvif *vif)
 		if (checksum_setup(vif, skb)) {
 			netdev_dbg(vif->dev,
 				   "Can't setup checksum in net_tx_action\n");
+			/* We have to set this flag to trigger the callback */
+			if (skb_shinfo(skb)->destructor_arg)
+				skb_shinfo(skb)->tx_flags |= SKBTX_DEV_ZEROCOPY;
 			kfree_skb(skb);
 			continue;
 		}
@@ -1378,6 +1361,14 @@ static int xenvif_tx_submit(struct xenvif *vif)
 
 		work_done++;
 
+		/* Set this flag right before netif_receive_skb, otherwise
+		 * someone might think this packet already left netback, and
+		 * do a skb_copy_ubufs while we are still in control of the
+		 * skb. E.g. the __pskb_pull_tail earlier can do such thing.
+		 */
+		if (skb_shinfo(skb)->destructor_arg)
+			skb_shinfo(skb)->tx_flags |= SKBTX_DEV_ZEROCOPY;
+
 		netif_receive_skb(skb);
 	}
 
@@ -1386,14 +1377,111 @@ static int xenvif_tx_submit(struct xenvif *vif)
 
 void xenvif_zerocopy_callback(struct ubuf_info *ubuf, bool zerocopy_success)
 {
-	return;
+	unsigned long flags;
+	pending_ring_idx_t index;
+	struct xenvif *vif = ubuf_to_vif(ubuf);
+
+	/* This is the only place where we grab this lock, to protect callbacks
+	 * from each other.
+	 */
+	spin_lock_irqsave(&vif->callback_lock, flags);
+	do {
+		u16 pending_idx = ubuf->desc;
+		ubuf = (struct ubuf_info *) ubuf->ctx;
+		BUG_ON(vif->dealloc_prod - vif->dealloc_cons >=
+			MAX_PENDING_REQS);
+		index = pending_index(vif->dealloc_prod);
+		vif->dealloc_ring[index] = pending_idx;
+		/* Sync with xenvif_tx_dealloc_action:
+		 * insert idx then incr producer.
+		 */
+		smp_wmb();
+		vif->dealloc_prod++;
+	} while (ubuf);
+	wake_up(&vif->dealloc_wq);
+	spin_unlock_irqrestore(&vif->callback_lock, flags);
+
+	if (RING_HAS_UNCONSUMED_REQUESTS(&vif->tx) &&
+	    xenvif_tx_pending_slots_available(vif)) {
+		local_bh_disable();
+		napi_schedule(&vif->napi);
+		local_bh_enable();
+	}
+}
+
+static inline void xenvif_tx_dealloc_action(struct xenvif *vif)
+{
+	struct gnttab_unmap_grant_ref *gop;
+	pending_ring_idx_t dc, dp;
+	u16 pending_idx, pending_idx_release[MAX_PENDING_REQS];
+	unsigned int i = 0;
+
+	dc = vif->dealloc_cons;
+	gop = vif->tx_unmap_ops;
+
+	/* Free up any grants we have finished using */
+	do {
+		dp = vif->dealloc_prod;
+
+		/* Ensure we see all indices enqueued by all
+		 * xenvif_zerocopy_callback().
+		 */
+		smp_rmb();
+
+		while (dc != dp) {
+			BUG_ON(gop - vif->tx_unmap_ops > MAX_PENDING_REQS);
+			pending_idx =
+				vif->dealloc_ring[pending_index(dc++)];
+
+			pending_idx_release[gop-vif->tx_unmap_ops] =
+				pending_idx;
+			vif->pages_to_unmap[gop-vif->tx_unmap_ops] =
+				vif->mmap_pages[pending_idx];
+			gnttab_set_unmap_op(gop,
+					    idx_to_kaddr(vif, pending_idx),
+					    GNTMAP_host_map,
+					    vif->grant_tx_handle[pending_idx]);
+			/* Btw. already unmapped? */
+			xenvif_grant_handle_reset(vif, pending_idx);
+			++gop;
+		}
+
+	} while (dp != vif->dealloc_prod);
+
+	vif->dealloc_cons = dc;
+
+	if (gop - vif->tx_unmap_ops > 0) {
+		int ret;
+		ret = gnttab_unmap_refs(vif->tx_unmap_ops,
+					NULL,
+					vif->pages_to_unmap,
+					gop - vif->tx_unmap_ops);
+		if (ret) {
+			netdev_err(vif->dev, "Unmap fail: nr_ops %x ret %d\n",
+				   gop - vif->tx_unmap_ops, ret);
+			for (i = 0; i < gop - vif->tx_unmap_ops; ++i) {
+				if (gop[i].status != GNTST_okay)
+					netdev_err(vif->dev,
+						   " host_addr: %llx handle: %x status: %d\n",
+						   gop[i].host_addr,
+						   gop[i].handle,
+						   gop[i].status);
+			}
+			BUG();
+		}
+	}
+
+	for (i = 0; i < gop - vif->tx_unmap_ops; ++i)
+		xenvif_idx_release(vif, pending_idx_release[i],
+				   XEN_NETIF_RSP_OKAY);
 }
 
+
 /* Called after netfront has transmitted */
 int xenvif_tx_action(struct xenvif *vif, int budget)
 {
 	unsigned nr_gops;
-	int work_done;
+	int work_done, ret;
 
 	if (unlikely(!tx_work_todo(vif)))
 		return 0;
@@ -1403,7 +1491,11 @@ int xenvif_tx_action(struct xenvif *vif, int budget)
 	if (nr_gops == 0)
 		return 0;
 
-	gnttab_batch_copy(vif->tx_copy_ops, nr_gops);
+	ret = gnttab_map_refs(vif->tx_map_ops,
+			      NULL,
+			      vif->pages_to_map,
+			      nr_gops);
+	BUG_ON(ret);
 
 	work_done = xenvif_tx_submit(vif);
 
@@ -1414,45 +1506,19 @@ static void xenvif_idx_release(struct xenvif *vif, u16 pending_idx,
 			       u8 status)
 {
 	struct pending_tx_info *pending_tx_info;
-	pending_ring_idx_t head;
+	pending_ring_idx_t index;
 	u16 peek; /* peek into next tx request */
+	unsigned long flags;
 
-	BUG_ON(vif->mmap_pages[pending_idx] == (void *)(~0UL));
-
-	/* Already complete? */
-	if (vif->mmap_pages[pending_idx] == NULL)
-		return;
-
-	pending_tx_info = &vif->pending_tx_info[pending_idx];
-
-	head = pending_tx_info->head;
-
-	BUG_ON(!pending_tx_is_head(vif, head));
-	BUG_ON(vif->pending_ring[pending_index(head)] != pending_idx);
-
-	do {
-		pending_ring_idx_t index;
-		pending_ring_idx_t idx = pending_index(head);
-		u16 info_idx = vif->pending_ring[idx];
-
-		pending_tx_info = &vif->pending_tx_info[info_idx];
+		pending_tx_info = &vif->pending_tx_info[pending_idx];
+		spin_lock_irqsave(&vif->response_lock, flags);
 		make_tx_response(vif, &pending_tx_info->req, status);
-
-		/* Setting any number other than
-		 * INVALID_PENDING_RING_IDX indicates this slot is
-		 * starting a new packet / ending a previous packet.
-		 */
-		pending_tx_info->head = 0;
-
-		index = pending_index(vif->pending_prod++);
-		vif->pending_ring[index] = vif->pending_ring[info_idx];
-
-		peek = vif->pending_ring[pending_index(++head)];
-
-	} while (!pending_tx_is_head(vif, peek));
-
-	put_page(vif->mmap_pages[pending_idx]);
-	vif->mmap_pages[pending_idx] = NULL;
+		index = pending_index(vif->pending_prod);
+		vif->pending_ring[index] = pending_idx;
+		/* TX shouldn't use the index before we give it back here */
+		mb();
+		vif->pending_prod++;
+		spin_unlock_irqrestore(&vif->response_lock, flags);
 }
 
 
@@ -1500,6 +1566,25 @@ static struct xen_netif_rx_response *make_rx_response(struct xenvif *vif,
 	return resp;
 }
 
+void xenvif_idx_unmap(struct xenvif *vif, u16 pending_idx)
+{
+	int ret;
+	struct gnttab_unmap_grant_ref tx_unmap_op;
+
+	gnttab_set_unmap_op(&tx_unmap_op,
+			    idx_to_kaddr(vif, pending_idx),
+			    GNTMAP_host_map,
+			    vif->grant_tx_handle[pending_idx]);
+	/* Btw. already unmapped? */
+	xenvif_grant_handle_reset(vif, pending_idx);
+
+	ret = gnttab_unmap_refs(&tx_unmap_op, NULL,
+				&vif->mmap_pages[pending_idx], 1);
+	BUG_ON(ret);
+
+	xenvif_idx_release(vif, pending_idx, XEN_NETIF_RSP_OKAY);
+}
+
 static inline int rx_work_todo(struct xenvif *vif)
 {
 	return !skb_queue_empty(&vif->rx_queue) &&
@@ -1516,6 +1601,11 @@ static inline int tx_work_todo(struct xenvif *vif)
 	return 0;
 }
 
+static inline bool tx_dealloc_work_todo(struct xenvif *vif)
+{
+	return vif->dealloc_cons != vif->dealloc_prod;
+}
+
 void xenvif_unmap_frontend_rings(struct xenvif *vif)
 {
 	if (vif->tx.sring)
@@ -1602,6 +1692,28 @@ int xenvif_kthread_guest_rx(void *data)
 	return 0;
 }
 
+int xenvif_dealloc_kthread(void *data)
+{
+	struct xenvif *vif = data;
+
+	while (!kthread_should_stop()) {
+		wait_event_interruptible(vif->dealloc_wq,
+					 tx_dealloc_work_todo(vif) ||
+					 kthread_should_stop());
+		if (kthread_should_stop())
+			break;
+
+		xenvif_tx_dealloc_action(vif);
+		cond_resched();
+	}
+
+	/* Unmap anything remaining*/
+	if (tx_dealloc_work_todo(vif))
+		xenvif_tx_dealloc_action(vif);
+
+	return 0;
+}
+
 static int __init netback_init(void)
 {
 	int rc = 0;
-- 
cgit v1.2.2


From 62bad3199a4c20505fc36c169deef20b25e17c5f Mon Sep 17 00:00:00 2001
From: Zoltan Kiss <zoltan.kiss@citrix.com>
Date: Thu, 6 Mar 2014 21:48:27 +0000
Subject: xen-netback: Remove old TX grant copy definitons and fix indentations

These became obsolete with grant mapping. I've left intentionally the
indentations in this way, to improve readability of previous patches.

NOTE: if bisect brought you here, you should apply the series up until
"xen-netback: Timeout packets in RX path", otherwise Windows guests can't work
properly and malicious guests can block other guests by not releasing their sent
packets.

Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/xen-netback/common.h  | 36 +-------------------
 drivers/net/xen-netback/netback.c | 72 ++++++++-------------------------------
 2 files changed, 15 insertions(+), 93 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/xen-netback/common.h b/drivers/net/xen-netback/common.h
index 5a991266a394..49109afa2253 100644
--- a/drivers/net/xen-netback/common.h
+++ b/drivers/net/xen-netback/common.h
@@ -48,37 +48,8 @@
 typedef unsigned int pending_ring_idx_t;
 #define INVALID_PENDING_RING_IDX (~0U)
 
-/* For the head field in pending_tx_info: it is used to indicate
- * whether this tx info is the head of one or more coalesced requests.
- *
- * When head != INVALID_PENDING_RING_IDX, it means the start of a new
- * tx requests queue and the end of previous queue.
- *
- * An example sequence of head fields (I = INVALID_PENDING_RING_IDX):
- *
- * ...|0 I I I|5 I|9 I I I|...
- * -->|<-INUSE----------------
- *
- * After consuming the first slot(s) we have:
- *
- * ...|V V V V|5 I|9 I I I|...
- * -----FREE->|<-INUSE--------
- *
- * where V stands for "valid pending ring index". Any number other
- * than INVALID_PENDING_RING_IDX is OK. These entries are considered
- * free and can contain any number other than
- * INVALID_PENDING_RING_IDX. In practice we use 0.
- *
- * The in use non-INVALID_PENDING_RING_IDX (say 0, 5 and 9 in the
- * above example) number is the index into pending_tx_info and
- * mmap_pages arrays.
- */
 struct pending_tx_info {
-	struct xen_netif_tx_request req; /* coalesced tx request */
-	pending_ring_idx_t head; /* head != INVALID_PENDING_RING_IDX
-				  * if it is head of one or more tx
-				  * reqs
-				  */
+	struct xen_netif_tx_request req; /* tx request */
 	/* Callback data for released SKBs. The callback is always
 	 * xenvif_zerocopy_callback, desc contains the pending_idx, which is
 	 * also an index in pending_tx_info array. It is initialized in
@@ -148,11 +119,6 @@ struct xenvif {
 	struct pending_tx_info pending_tx_info[MAX_PENDING_REQS];
 	grant_handle_t grant_tx_handle[MAX_PENDING_REQS];
 
-	/* Coalescing tx requests before copying makes number of grant
-	 * copy ops greater or equal to number of slots required. In
-	 * worst case a tx request consumes 2 gnttab_copy.
-	 */
-	struct gnttab_copy tx_copy_ops[2*MAX_PENDING_REQS];
 	struct gnttab_map_grant_ref tx_map_ops[MAX_PENDING_REQS];
 	struct gnttab_unmap_grant_ref tx_unmap_ops[MAX_PENDING_REQS];
 	/* passed to gnttab_[un]map_refs with pages under (un)mapping */
diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c
index cb29134147d1..46a75706cb78 100644
--- a/drivers/net/xen-netback/netback.c
+++ b/drivers/net/xen-netback/netback.c
@@ -62,16 +62,6 @@ module_param(separate_tx_rx_irq, bool, 0644);
 static unsigned int fatal_skb_slots = FATAL_SKB_SLOTS_DEFAULT;
 module_param(fatal_skb_slots, uint, 0444);
 
-/*
- * If head != INVALID_PENDING_RING_IDX, it means this tx request is head of
- * one or more merged tx requests, otherwise it is the continuation of
- * previous tx request.
- */
-static inline int pending_tx_is_head(struct xenvif *vif, RING_IDX idx)
-{
-	return vif->pending_tx_info[idx].head != INVALID_PENDING_RING_IDX;
-}
-
 static void xenvif_idx_release(struct xenvif *vif, u16 pending_idx,
 			       u8 status);
 
@@ -790,19 +780,6 @@ static int xenvif_count_requests(struct xenvif *vif,
 	return slots;
 }
 
-static struct page *xenvif_alloc_page(struct xenvif *vif,
-				      u16 pending_idx)
-{
-	struct page *page;
-
-	page = alloc_page(GFP_ATOMIC|__GFP_COLD);
-	if (!page)
-		return NULL;
-	vif->mmap_pages[pending_idx] = page;
-
-	return page;
-}
-
 
 struct xenvif_tx_cb {
 	u16 pending_idx;
@@ -832,13 +809,9 @@ static struct gnttab_map_grant_ref *xenvif_get_requests(struct xenvif *vif,
 	struct skb_shared_info *shinfo = skb_shinfo(skb);
 	skb_frag_t *frags = shinfo->frags;
 	u16 pending_idx = XENVIF_TX_CB(skb)->pending_idx;
-	u16 head_idx = 0;
-	int slot, start;
-	struct page *page;
-	pending_ring_idx_t index, start_idx = 0;
-	uint16_t dst_offset;
+	int start;
+	pending_ring_idx_t index;
 	unsigned int nr_slots;
-	struct pending_tx_info *first = NULL;
 
 	/* At this point shinfo->nr_frags is in fact the number of
 	 * slots, which can be as large as XEN_NETBK_LEGACY_SLOTS_MAX.
@@ -850,8 +823,8 @@ static struct gnttab_map_grant_ref *xenvif_get_requests(struct xenvif *vif,
 
 	for (shinfo->nr_frags = start; shinfo->nr_frags < nr_slots;
 	     shinfo->nr_frags++, txp++, gop++) {
-				index = pending_index(vif->pending_cons++);
-				pending_idx = vif->pending_ring[index];
+		index = pending_index(vif->pending_cons++);
+		pending_idx = vif->pending_ring[index];
 		xenvif_tx_create_gop(vif, pending_idx, txp, gop);
 		frag_set_pending_idx(&frags[shinfo->nr_frags], pending_idx);
 	}
@@ -859,18 +832,6 @@ static struct gnttab_map_grant_ref *xenvif_get_requests(struct xenvif *vif,
 	BUG_ON(shinfo->nr_frags > MAX_SKB_FRAGS);
 
 	return gop;
-err:
-	/* Unwind, freeing all pages and sending error responses. */
-	while (shinfo->nr_frags-- > start) {
-		xenvif_idx_release(vif,
-				frag_get_pending_idx(&frags[shinfo->nr_frags]),
-				XEN_NETIF_RSP_ERROR);
-	}
-	/* The head too, if necessary. */
-	if (start)
-		xenvif_idx_release(vif, pending_idx, XEN_NETIF_RSP_ERROR);
-
-	return NULL;
 }
 
 static inline void xenvif_grant_handle_set(struct xenvif *vif,
@@ -910,7 +871,6 @@ static int xenvif_tx_check_gop(struct xenvif *vif,
 	struct pending_tx_info *tx_info;
 	int nr_frags = shinfo->nr_frags;
 	int i, err, start;
-	u16 peek; /* peek into next tx request */
 
 	/* Check status of header. */
 	err = gop->status;
@@ -924,14 +884,12 @@ static int xenvif_tx_check_gop(struct xenvif *vif,
 
 	for (i = start; i < nr_frags; i++) {
 		int j, newerr;
-		pending_ring_idx_t head;
 
 		pending_idx = frag_get_pending_idx(&shinfo->frags[i]);
 		tx_info = &vif->pending_tx_info[pending_idx];
-		head = tx_info->head;
 
 		/* Check error status: if okay then remember grant handle. */
-			newerr = (++gop)->status;
+		newerr = (++gop)->status;
 
 		if (likely(!newerr)) {
 			xenvif_grant_handle_set(vif, pending_idx , gop->handle);
@@ -1136,7 +1094,6 @@ static unsigned xenvif_tx_build_gops(struct xenvif *vif, int budget)
 	       (skb_queue_len(&vif->tx_queue) < budget)) {
 		struct xen_netif_tx_request txreq;
 		struct xen_netif_tx_request txfrags[XEN_NETBK_LEGACY_SLOTS_MAX];
-		struct page *page;
 		struct xen_netif_extra_info extras[XEN_NETIF_EXTRA_TYPE_MAX-1];
 		u16 pending_idx;
 		RING_IDX idx;
@@ -1507,18 +1464,17 @@ static void xenvif_idx_release(struct xenvif *vif, u16 pending_idx,
 {
 	struct pending_tx_info *pending_tx_info;
 	pending_ring_idx_t index;
-	u16 peek; /* peek into next tx request */
 	unsigned long flags;
 
-		pending_tx_info = &vif->pending_tx_info[pending_idx];
-		spin_lock_irqsave(&vif->response_lock, flags);
-		make_tx_response(vif, &pending_tx_info->req, status);
-		index = pending_index(vif->pending_prod);
-		vif->pending_ring[index] = pending_idx;
-		/* TX shouldn't use the index before we give it back here */
-		mb();
-		vif->pending_prod++;
-		spin_unlock_irqrestore(&vif->response_lock, flags);
+	pending_tx_info = &vif->pending_tx_info[pending_idx];
+	spin_lock_irqsave(&vif->response_lock, flags);
+	make_tx_response(vif, &pending_tx_info->req, status);
+	index = pending_index(vif->pending_prod);
+	vif->pending_ring[index] = pending_idx;
+	/* TX shouldn't use the index before we give it back here */
+	mb();
+	vif->pending_prod++;
+	spin_unlock_irqrestore(&vif->response_lock, flags);
 }
 
 
-- 
cgit v1.2.2


From 1bb332af4cd889e4b64dacbf4a793ceb3a70445d Mon Sep 17 00:00:00 2001
From: Zoltan Kiss <zoltan.kiss@citrix.com>
Date: Thu, 6 Mar 2014 21:48:28 +0000
Subject: xen-netback: Add stat counters for zerocopy

These counters help determine how often the buffers had to be copied. Also
they help find out if packets are leaked, as if "sent != success + fail",
there are probably packets never freed up properly.

NOTE: if bisect brought you here, you should apply the series up until
"xen-netback: Timeout packets in RX path", otherwise Windows guests can't work
properly and malicious guests can block other guests by not releasing their sent
packets.

Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/xen-netback/common.h    |  3 +++
 drivers/net/xen-netback/interface.c | 15 +++++++++++++++
 drivers/net/xen-netback/netback.c   |  9 ++++++++-
 3 files changed, 26 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/xen-netback/common.h b/drivers/net/xen-netback/common.h
index 49109afa2253..683d30160a7c 100644
--- a/drivers/net/xen-netback/common.h
+++ b/drivers/net/xen-netback/common.h
@@ -179,6 +179,9 @@ struct xenvif {
 
 	/* Statistics */
 	unsigned long rx_gso_checksum_fixup;
+	unsigned long tx_zerocopy_sent;
+	unsigned long tx_zerocopy_success;
+	unsigned long tx_zerocopy_fail;
 
 	/* Miscellaneous private stuff. */
 	struct net_device *dev;
diff --git a/drivers/net/xen-netback/interface.c b/drivers/net/xen-netback/interface.c
index 1fe9fe523cc8..44df8581b4d7 100644
--- a/drivers/net/xen-netback/interface.c
+++ b/drivers/net/xen-netback/interface.c
@@ -238,6 +238,21 @@ static const struct xenvif_stat {
 		"rx_gso_checksum_fixup",
 		offsetof(struct xenvif, rx_gso_checksum_fixup)
 	},
+	/* If (sent != success + fail), there are probably packets never
+	 * freed up properly!
+	 */
+	{
+		"tx_zerocopy_sent",
+		offsetof(struct xenvif, tx_zerocopy_sent),
+	},
+	{
+		"tx_zerocopy_success",
+		offsetof(struct xenvif, tx_zerocopy_success),
+	},
+	{
+		"tx_zerocopy_fail",
+		offsetof(struct xenvif, tx_zerocopy_fail)
+	},
 };
 
 static int xenvif_get_sset_count(struct net_device *dev, int string_set)
diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c
index 46a75706cb78..3cb586357df7 100644
--- a/drivers/net/xen-netback/netback.c
+++ b/drivers/net/xen-netback/netback.c
@@ -1323,8 +1323,10 @@ static int xenvif_tx_submit(struct xenvif *vif)
 		 * do a skb_copy_ubufs while we are still in control of the
 		 * skb. E.g. the __pskb_pull_tail earlier can do such thing.
 		 */
-		if (skb_shinfo(skb)->destructor_arg)
+		if (skb_shinfo(skb)->destructor_arg) {
 			skb_shinfo(skb)->tx_flags |= SKBTX_DEV_ZEROCOPY;
+			vif->tx_zerocopy_sent++;
+		}
 
 		netif_receive_skb(skb);
 	}
@@ -1364,6 +1366,11 @@ void xenvif_zerocopy_callback(struct ubuf_info *ubuf, bool zerocopy_success)
 		napi_schedule(&vif->napi);
 		local_bh_enable();
 	}
+
+	if (likely(zerocopy_success))
+		vif->tx_zerocopy_success++;
+	else
+		vif->tx_zerocopy_fail++;
 }
 
 static inline void xenvif_tx_dealloc_action(struct xenvif *vif)
-- 
cgit v1.2.2


From e3377f36ca20a034dce56335dc9b89f41094d845 Mon Sep 17 00:00:00 2001
From: Zoltan Kiss <zoltan.kiss@citrix.com>
Date: Thu, 6 Mar 2014 21:48:29 +0000
Subject: xen-netback: Handle guests with too many frags

Xen network protocol had implicit dependency on MAX_SKB_FRAGS. Netback has to
handle guests sending up to XEN_NETBK_LEGACY_SLOTS_MAX slots. To achieve that:
- create a new skb
- map the leftover slots to its frags (no linear buffer here!)
- chain it to the previous through skb_shinfo(skb)->frag_list
- map them
- copy and coalesce the frags into a brand new one and send it to the stack
- unmap the 2 old skb's pages

It's also introduces new stat counters, which help determine how often the guest
sends a packet with more than MAX_SKB_FRAGS frags.

NOTE: if bisect brought you here, you should apply the series up until
"xen-netback: Timeout packets in RX path", otherwise malicious guests can block
other guests by not releasing their sent packets.

Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/xen-netback/common.h    |   1 +
 drivers/net/xen-netback/interface.c |   7 ++
 drivers/net/xen-netback/netback.c   | 164 +++++++++++++++++++++++++++++++++---
 3 files changed, 162 insertions(+), 10 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/xen-netback/common.h b/drivers/net/xen-netback/common.h
index 683d30160a7c..f2f8a02afc36 100644
--- a/drivers/net/xen-netback/common.h
+++ b/drivers/net/xen-netback/common.h
@@ -182,6 +182,7 @@ struct xenvif {
 	unsigned long tx_zerocopy_sent;
 	unsigned long tx_zerocopy_success;
 	unsigned long tx_zerocopy_fail;
+	unsigned long tx_frag_overflow;
 
 	/* Miscellaneous private stuff. */
 	struct net_device *dev;
diff --git a/drivers/net/xen-netback/interface.c b/drivers/net/xen-netback/interface.c
index 44df8581b4d7..b646039e539b 100644
--- a/drivers/net/xen-netback/interface.c
+++ b/drivers/net/xen-netback/interface.c
@@ -253,6 +253,13 @@ static const struct xenvif_stat {
 		"tx_zerocopy_fail",
 		offsetof(struct xenvif, tx_zerocopy_fail)
 	},
+	/* Number of packets exceeding MAX_SKB_FRAG slots. You should use
+	 * a guest with the same MAX_SKB_FRAG
+	 */
+	{
+		"tx_frag_overflow",
+		offsetof(struct xenvif, tx_frag_overflow)
+	},
 };
 
 static int xenvif_get_sset_count(struct net_device *dev, int string_set)
diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c
index 3cb586357df7..58effc49f526 100644
--- a/drivers/net/xen-netback/netback.c
+++ b/drivers/net/xen-netback/netback.c
@@ -37,6 +37,7 @@
 #include <linux/kthread.h>
 #include <linux/if_vlan.h>
 #include <linux/udp.h>
+#include <linux/highmem.h>
 
 #include <net/tcp.h>
 
@@ -801,6 +802,23 @@ static inline void xenvif_tx_create_gop(struct xenvif *vif,
 	       sizeof(*txp));
 }
 
+static inline struct sk_buff *xenvif_alloc_skb(unsigned int size)
+{
+	struct sk_buff *skb =
+		alloc_skb(size + NET_SKB_PAD + NET_IP_ALIGN,
+			  GFP_ATOMIC | __GFP_NOWARN);
+	if (unlikely(skb == NULL))
+		return NULL;
+
+	/* Packets passed to netif_rx() must have some headroom. */
+	skb_reserve(skb, NET_SKB_PAD + NET_IP_ALIGN);
+
+	/* Initialize it here to avoid later surprises */
+	skb_shinfo(skb)->destructor_arg = NULL;
+
+	return skb;
+}
+
 static struct gnttab_map_grant_ref *xenvif_get_requests(struct xenvif *vif,
 							struct sk_buff *skb,
 							struct xen_netif_tx_request *txp,
@@ -811,11 +829,16 @@ static struct gnttab_map_grant_ref *xenvif_get_requests(struct xenvif *vif,
 	u16 pending_idx = XENVIF_TX_CB(skb)->pending_idx;
 	int start;
 	pending_ring_idx_t index;
-	unsigned int nr_slots;
+	unsigned int nr_slots, frag_overflow = 0;
 
 	/* At this point shinfo->nr_frags is in fact the number of
 	 * slots, which can be as large as XEN_NETBK_LEGACY_SLOTS_MAX.
 	 */
+	if (shinfo->nr_frags > MAX_SKB_FRAGS) {
+		frag_overflow = shinfo->nr_frags - MAX_SKB_FRAGS;
+		BUG_ON(frag_overflow > MAX_SKB_FRAGS);
+		shinfo->nr_frags = MAX_SKB_FRAGS;
+	}
 	nr_slots = shinfo->nr_frags;
 
 	/* Skip first skb fragment if it is on same page as header fragment. */
@@ -829,7 +852,29 @@ static struct gnttab_map_grant_ref *xenvif_get_requests(struct xenvif *vif,
 		frag_set_pending_idx(&frags[shinfo->nr_frags], pending_idx);
 	}
 
-	BUG_ON(shinfo->nr_frags > MAX_SKB_FRAGS);
+	if (frag_overflow) {
+		struct sk_buff *nskb = xenvif_alloc_skb(0);
+		if (unlikely(nskb == NULL)) {
+			if (net_ratelimit())
+				netdev_err(vif->dev,
+					   "Can't allocate the frag_list skb.\n");
+			return NULL;
+		}
+
+		shinfo = skb_shinfo(nskb);
+		frags = shinfo->frags;
+
+		for (shinfo->nr_frags = 0; shinfo->nr_frags < frag_overflow;
+		     shinfo->nr_frags++, txp++, gop++) {
+			index = pending_index(vif->pending_cons++);
+			pending_idx = vif->pending_ring[index];
+			xenvif_tx_create_gop(vif, pending_idx, txp, gop);
+			frag_set_pending_idx(&frags[shinfo->nr_frags],
+					     pending_idx);
+		}
+
+		skb_shinfo(skb)->frag_list = nskb;
+	}
 
 	return gop;
 }
@@ -871,6 +916,7 @@ static int xenvif_tx_check_gop(struct xenvif *vif,
 	struct pending_tx_info *tx_info;
 	int nr_frags = shinfo->nr_frags;
 	int i, err, start;
+	struct sk_buff *first_skb = NULL;
 
 	/* Check status of header. */
 	err = gop->status;
@@ -882,6 +928,7 @@ static int xenvif_tx_check_gop(struct xenvif *vif,
 	/* Skip first skb fragment if it is on same page as header fragment. */
 	start = (frag_get_pending_idx(&shinfo->frags[0]) == pending_idx);
 
+check_frags:
 	for (i = start; i < nr_frags; i++) {
 		int j, newerr;
 
@@ -905,9 +952,11 @@ static int xenvif_tx_check_gop(struct xenvif *vif,
 		/* Not the first error? Preceding frags already invalidated. */
 		if (err)
 			continue;
-
 		/* First error: invalidate header and preceding fragments. */
-		pending_idx = XENVIF_TX_CB(skb)->pending_idx;
+		if (!first_skb)
+			pending_idx = XENVIF_TX_CB(skb)->pending_idx;
+		else
+			pending_idx = XENVIF_TX_CB(skb)->pending_idx;
 		xenvif_idx_unmap(vif, pending_idx);
 		for (j = start; j < i; j++) {
 			pending_idx = frag_get_pending_idx(&shinfo->frags[j]);
@@ -918,6 +967,30 @@ static int xenvif_tx_check_gop(struct xenvif *vif,
 		err = newerr;
 	}
 
+	if (skb_has_frag_list(skb)) {
+		first_skb = skb;
+		skb = shinfo->frag_list;
+		shinfo = skb_shinfo(skb);
+		nr_frags = shinfo->nr_frags;
+		start = 0;
+
+		goto check_frags;
+	}
+
+	/* There was a mapping error in the frag_list skb. We have to unmap
+	 * the first skb's frags
+	 */
+	if (first_skb && err) {
+		int j;
+		shinfo = skb_shinfo(first_skb);
+		pending_idx = XENVIF_TX_CB(skb)->pending_idx;
+		start = (frag_get_pending_idx(&shinfo->frags[0]) == pending_idx);
+		for (j = start; j < shinfo->nr_frags; j++) {
+			pending_idx = frag_get_pending_idx(&shinfo->frags[j]);
+			xenvif_idx_unmap(vif, pending_idx);
+		}
+	}
+
 	*gopp = gop + 1;
 	return err;
 }
@@ -1169,8 +1242,7 @@ static unsigned xenvif_tx_build_gops(struct xenvif *vif, int budget)
 			    ret < XEN_NETBK_LEGACY_SLOTS_MAX) ?
 			PKT_PROT_LEN : txreq.size;
 
-		skb = alloc_skb(data_len + NET_SKB_PAD + NET_IP_ALIGN,
-				GFP_ATOMIC | __GFP_NOWARN);
+		skb = xenvif_alloc_skb(data_len);
 		if (unlikely(skb == NULL)) {
 			netdev_dbg(vif->dev,
 				   "Can't allocate a skb in start_xmit.\n");
@@ -1178,9 +1250,6 @@ static unsigned xenvif_tx_build_gops(struct xenvif *vif, int budget)
 			break;
 		}
 
-		/* Packets passed to netif_rx() must have some headroom. */
-		skb_reserve(skb, NET_SKB_PAD + NET_IP_ALIGN);
-
 		if (extras[XEN_NETIF_EXTRA_TYPE_GSO - 1].type) {
 			struct xen_netif_extra_info *gso;
 			gso = &extras[XEN_NETIF_EXTRA_TYPE_GSO - 1];
@@ -1231,6 +1300,71 @@ static unsigned xenvif_tx_build_gops(struct xenvif *vif, int budget)
 	return gop - vif->tx_map_ops;
 }
 
+/* Consolidate skb with a frag_list into a brand new one with local pages on
+ * frags. Returns 0 or -ENOMEM if can't allocate new pages.
+ */
+static int xenvif_handle_frag_list(struct xenvif *vif, struct sk_buff *skb)
+{
+	unsigned int offset = skb_headlen(skb);
+	skb_frag_t frags[MAX_SKB_FRAGS];
+	int i;
+	struct ubuf_info *uarg;
+	struct sk_buff *nskb = skb_shinfo(skb)->frag_list;
+
+	vif->tx_zerocopy_sent += 2;
+	vif->tx_frag_overflow++;
+
+	xenvif_fill_frags(vif, nskb);
+	/* Subtract frags size, we will correct it later */
+	skb->truesize -= skb->data_len;
+	skb->len += nskb->len;
+	skb->data_len += nskb->len;
+
+	/* create a brand new frags array and coalesce there */
+	for (i = 0; offset < skb->len; i++) {
+		struct page *page;
+		unsigned int len;
+
+		BUG_ON(i >= MAX_SKB_FRAGS);
+		page = alloc_page(GFP_ATOMIC|__GFP_COLD);
+		if (!page) {
+			int j;
+			skb->truesize += skb->data_len;
+			for (j = 0; j < i; j++)
+				put_page(frags[j].page.p);
+			return -ENOMEM;
+		}
+
+		if (offset + PAGE_SIZE < skb->len)
+			len = PAGE_SIZE;
+		else
+			len = skb->len - offset;
+		if (skb_copy_bits(skb, offset, page_address(page), len))
+			BUG();
+
+		offset += len;
+		frags[i].page.p = page;
+		frags[i].page_offset = 0;
+		skb_frag_size_set(&frags[i], len);
+	}
+	/* swap out with old one */
+	memcpy(skb_shinfo(skb)->frags,
+	       frags,
+	       i * sizeof(skb_frag_t));
+	skb_shinfo(skb)->nr_frags = i;
+	skb->truesize += i * PAGE_SIZE;
+
+	/* remove traces of mapped pages and frag_list */
+	skb_frag_list_init(skb);
+	uarg = skb_shinfo(skb)->destructor_arg;
+	uarg->callback(uarg, true);
+	skb_shinfo(skb)->destructor_arg = NULL;
+
+	skb_shinfo(nskb)->tx_flags |= SKBTX_DEV_ZEROCOPY;
+	kfree_skb(nskb);
+
+	return 0;
+}
 
 static int xenvif_tx_submit(struct xenvif *vif)
 {
@@ -1267,7 +1401,6 @@ static int xenvif_tx_submit(struct xenvif *vif)
 				&vif->pending_tx_info[pending_idx].callback_struct;
 		} else {
 			/* Schedule a response immediately. */
-			skb_shinfo(skb)->destructor_arg = NULL;
 			xenvif_idx_unmap(vif, pending_idx);
 		}
 
@@ -1278,6 +1411,17 @@ static int xenvif_tx_submit(struct xenvif *vif)
 
 		xenvif_fill_frags(vif, skb);
 
+		if (unlikely(skb_has_frag_list(skb))) {
+			if (xenvif_handle_frag_list(vif, skb)) {
+				if (net_ratelimit())
+					netdev_err(vif->dev,
+						   "Not enough memory to consolidate frag_list!\n");
+				skb_shinfo(skb)->tx_flags |= SKBTX_DEV_ZEROCOPY;
+				kfree_skb(skb);
+				continue;
+			}
+		}
+
 		if (skb_is_nonlinear(skb) && skb_headlen(skb) < PKT_PROT_LEN) {
 			int target = min_t(int, skb->len, PKT_PROT_LEN);
 			__pskb_pull_tail(skb, target - skb_headlen(skb));
-- 
cgit v1.2.2


From 093507885ae5dc0288af07fbb922d2f85b3a88a6 Mon Sep 17 00:00:00 2001
From: Zoltan Kiss <zoltan.kiss@citrix.com>
Date: Thu, 6 Mar 2014 21:48:30 +0000
Subject: xen-netback: Timeout packets in RX path

A malicious or buggy guest can leave its queue filled indefinitely, in which
case qdisc start to queue packets for that VIF. If those packets came from an
another guest, it can block its slots and prevent shutdown. To avoid that, we
make sure the queue is drained in every 10 seconds.
The QDisc queue in worst case takes 3 round to flush usually.

Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/xen-netback/common.h    |  6 ++++++
 drivers/net/xen-netback/interface.c | 37 +++++++++++++++++++++++++++++++++++--
 drivers/net/xen-netback/netback.c   | 23 ++++++++++++++++++++---
 3 files changed, 61 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/xen-netback/common.h b/drivers/net/xen-netback/common.h
index f2f8a02afc36..0355f8767e3b 100644
--- a/drivers/net/xen-netback/common.h
+++ b/drivers/net/xen-netback/common.h
@@ -148,6 +148,9 @@ struct xenvif {
 	struct xen_netif_rx_back_ring rx;
 	struct sk_buff_head rx_queue;
 	RING_IDX rx_last_skb_slots;
+	bool rx_queue_purge;
+
+	struct timer_list wake_queue;
 
 	/* This array is allocated seperately as it is large */
 	struct gnttab_copy *grant_copy_op;
@@ -259,4 +262,7 @@ void xenvif_zerocopy_callback(struct ubuf_info *ubuf, bool zerocopy_success);
 
 extern bool separate_tx_rx_irq;
 
+extern unsigned int rx_drain_timeout_msecs;
+extern unsigned int rx_drain_timeout_jiffies;
+
 #endif /* __XEN_NETBACK__COMMON_H__ */
diff --git a/drivers/net/xen-netback/interface.c b/drivers/net/xen-netback/interface.c
index b646039e539b..9cc9f638f442 100644
--- a/drivers/net/xen-netback/interface.c
+++ b/drivers/net/xen-netback/interface.c
@@ -115,6 +115,18 @@ static irqreturn_t xenvif_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+static void xenvif_wake_queue(unsigned long data)
+{
+	struct xenvif *vif = (struct xenvif *)data;
+
+	if (netif_queue_stopped(vif->dev)) {
+		netdev_err(vif->dev, "draining TX queue\n");
+		vif->rx_queue_purge = true;
+		xenvif_kick_thread(vif);
+		netif_wake_queue(vif->dev);
+	}
+}
+
 static int xenvif_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct xenvif *vif = netdev_priv(dev);
@@ -144,8 +156,13 @@ static int xenvif_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	 * then turn off the queue to give the ring a chance to
 	 * drain.
 	 */
-	if (!xenvif_rx_ring_slots_available(vif, min_slots_needed))
+	if (!xenvif_rx_ring_slots_available(vif, min_slots_needed)) {
+		vif->wake_queue.function = xenvif_wake_queue;
+		vif->wake_queue.data = (unsigned long)vif;
 		xenvif_stop_queue(vif);
+		mod_timer(&vif->wake_queue,
+			jiffies + rx_drain_timeout_jiffies);
+	}
 
 	skb_queue_tail(&vif->rx_queue, skb);
 	xenvif_kick_thread(vif);
@@ -353,6 +370,8 @@ struct xenvif *xenvif_alloc(struct device *parent, domid_t domid,
 	init_timer(&vif->credit_timeout);
 	vif->credit_window_start = get_jiffies_64();
 
+	init_timer(&vif->wake_queue);
+
 	dev->netdev_ops	= &xenvif_netdev_ops;
 	dev->hw_features = NETIF_F_SG |
 		NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
@@ -531,6 +550,7 @@ void xenvif_disconnect(struct xenvif *vif)
 		xenvif_carrier_off(vif);
 
 	if (vif->task) {
+		del_timer_sync(&vif->wake_queue);
 		kthread_stop(vif->task);
 		vif->task = NULL;
 	}
@@ -556,12 +576,25 @@ void xenvif_disconnect(struct xenvif *vif)
 void xenvif_free(struct xenvif *vif)
 {
 	int i, unmap_timeout = 0;
+	/* Here we want to avoid timeout messages if an skb can be legitimatly
+	 * stucked somewhere else. Realisticly this could be an another vif's
+	 * internal or QDisc queue. That another vif also has this
+	 * rx_drain_timeout_msecs timeout, but the timer only ditches the
+	 * internal queue. After that, the QDisc queue can put in worst case
+	 * XEN_NETIF_RX_RING_SIZE / MAX_SKB_FRAGS skbs into that another vif's
+	 * internal queue, so we need several rounds of such timeouts until we
+	 * can be sure that no another vif should have skb's from us. We are
+	 * not sending more skb's, so newly stucked packets are not interesting
+	 * for us here.
+	 */
+	unsigned int worst_case_skb_lifetime = (rx_drain_timeout_msecs/1000) *
+		DIV_ROUND_UP(XENVIF_QUEUE_LENGTH, (XEN_NETIF_RX_RING_SIZE / MAX_SKB_FRAGS));
 
 	for (i = 0; i < MAX_PENDING_REQS; ++i) {
 		if (vif->grant_tx_handle[i] != NETBACK_INVALID_HANDLE) {
 			unmap_timeout++;
 			schedule_timeout(msecs_to_jiffies(1000));
-			if (unmap_timeout > 9 &&
+			if (unmap_timeout > worst_case_skb_lifetime &&
 			    net_ratelimit())
 				netdev_err(vif->dev,
 					   "Page still granted! Index: %x\n",
diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c
index 58effc49f526..8518a0d1f6f9 100644
--- a/drivers/net/xen-netback/netback.c
+++ b/drivers/net/xen-netback/netback.c
@@ -55,6 +55,13 @@
 bool separate_tx_rx_irq = 1;
 module_param(separate_tx_rx_irq, bool, 0644);
 
+/* When guest ring is filled up, qdisc queues the packets for us, but we have
+ * to timeout them, otherwise other guests' packets can get stucked there
+ */
+unsigned int rx_drain_timeout_msecs = 10000;
+module_param(rx_drain_timeout_msecs, uint, 0444);
+unsigned int rx_drain_timeout_jiffies;
+
 /*
  * This is the maximum slots a skb can have. If a guest sends a skb
  * which exceeds this limit it is considered malicious.
@@ -1694,8 +1701,9 @@ void xenvif_idx_unmap(struct xenvif *vif, u16 pending_idx)
 
 static inline int rx_work_todo(struct xenvif *vif)
 {
-	return !skb_queue_empty(&vif->rx_queue) &&
-	       xenvif_rx_ring_slots_available(vif, vif->rx_last_skb_slots);
+	return (!skb_queue_empty(&vif->rx_queue) &&
+	       xenvif_rx_ring_slots_available(vif, vif->rx_last_skb_slots)) ||
+	       vif->rx_queue_purge;
 }
 
 static inline int tx_work_todo(struct xenvif *vif)
@@ -1782,12 +1790,19 @@ int xenvif_kthread_guest_rx(void *data)
 		if (kthread_should_stop())
 			break;
 
+		if (vif->rx_queue_purge) {
+			skb_queue_purge(&vif->rx_queue);
+			vif->rx_queue_purge = false;
+		}
+
 		if (!skb_queue_empty(&vif->rx_queue))
 			xenvif_rx_action(vif);
 
 		if (skb_queue_empty(&vif->rx_queue) &&
-		    netif_queue_stopped(vif->dev))
+		    netif_queue_stopped(vif->dev)) {
+			del_timer_sync(&vif->wake_queue);
 			xenvif_start_queue(vif);
+		}
 
 		cond_resched();
 	}
@@ -1838,6 +1853,8 @@ static int __init netback_init(void)
 	if (rc)
 		goto failed_init;
 
+	rx_drain_timeout_jiffies = msecs_to_jiffies(rx_drain_timeout_msecs);
+
 	return 0;
 
 failed_init:
-- 
cgit v1.2.2


From e9275f5e2df1b2098a8cc405d87b88b9affd73e6 Mon Sep 17 00:00:00 2001
From: Zoltan Kiss <zoltan.kiss@citrix.com>
Date: Thu, 6 Mar 2014 21:48:31 +0000
Subject: xen-netback: Aggregate TX unmap operations

Unmapping causes TLB flushing, therefore we should make it in the largest
possible batches. However we shouldn't starve the guest for too long. So if
the guest has space for at least two big packets and we don't have at least a
quarter ring to unmap, delay it for at most 1 milisec.

Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/xen-netback/common.h    |  2 ++
 drivers/net/xen-netback/interface.c |  2 ++
 drivers/net/xen-netback/netback.c   | 34 +++++++++++++++++++++++++++++++++-
 3 files changed, 37 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/xen-netback/common.h b/drivers/net/xen-netback/common.h
index 0355f8767e3b..bef37be402b8 100644
--- a/drivers/net/xen-netback/common.h
+++ b/drivers/net/xen-netback/common.h
@@ -137,6 +137,8 @@ struct xenvif {
 	u16 dealloc_ring[MAX_PENDING_REQS];
 	struct task_struct *dealloc_task;
 	wait_queue_head_t dealloc_wq;
+	struct timer_list dealloc_delay;
+	bool dealloc_delay_timed_out;
 
 	/* Use kthread for guest RX */
 	struct task_struct *task;
diff --git a/drivers/net/xen-netback/interface.c b/drivers/net/xen-netback/interface.c
index 9cc9f638f442..83a71ac5b93a 100644
--- a/drivers/net/xen-netback/interface.c
+++ b/drivers/net/xen-netback/interface.c
@@ -408,6 +408,7 @@ struct xenvif *xenvif_alloc(struct device *parent, domid_t domid,
 			  .desc = i };
 		vif->grant_tx_handle[i] = NETBACK_INVALID_HANDLE;
 	}
+	init_timer(&vif->dealloc_delay);
 
 	/*
 	 * Initialise a dummy MAC address. We choose the numerically
@@ -556,6 +557,7 @@ void xenvif_disconnect(struct xenvif *vif)
 	}
 
 	if (vif->dealloc_task) {
+		del_timer_sync(&vif->dealloc_delay);
 		kthread_stop(vif->dealloc_task);
 		vif->dealloc_task = NULL;
 	}
diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c
index 8518a0d1f6f9..bc943205a691 100644
--- a/drivers/net/xen-netback/netback.c
+++ b/drivers/net/xen-netback/netback.c
@@ -133,6 +133,11 @@ static inline pending_ring_idx_t pending_index(unsigned i)
 	return i & (MAX_PENDING_REQS-1);
 }
 
+static inline pending_ring_idx_t nr_free_slots(struct xen_netif_tx_back_ring *ring)
+{
+	return ring->nr_ents -	(ring->sring->req_prod - ring->rsp_prod_pvt);
+}
+
 bool xenvif_rx_ring_slots_available(struct xenvif *vif, int needed)
 {
 	RING_IDX prod, cons;
@@ -1716,9 +1721,36 @@ static inline int tx_work_todo(struct xenvif *vif)
 	return 0;
 }
 
+static void xenvif_dealloc_delay(unsigned long data)
+{
+	struct xenvif *vif = (struct xenvif *)data;
+
+	vif->dealloc_delay_timed_out = true;
+	wake_up(&vif->dealloc_wq);
+}
+
 static inline bool tx_dealloc_work_todo(struct xenvif *vif)
 {
-	return vif->dealloc_cons != vif->dealloc_prod;
+	if (vif->dealloc_cons != vif->dealloc_prod) {
+		if ((nr_free_slots(&vif->tx) > 2 * XEN_NETBK_LEGACY_SLOTS_MAX) &&
+		    (vif->dealloc_prod - vif->dealloc_cons < MAX_PENDING_REQS / 4) &&
+		    !vif->dealloc_delay_timed_out) {
+			if (!timer_pending(&vif->dealloc_delay)) {
+				vif->dealloc_delay.function =
+					xenvif_dealloc_delay;
+				vif->dealloc_delay.data = (unsigned long)vif;
+				mod_timer(&vif->dealloc_delay,
+					  jiffies + msecs_to_jiffies(1));
+
+			}
+			return false;
+		}
+		del_timer_sync(&vif->dealloc_delay);
+		vif->dealloc_delay_timed_out = false;
+		return true;
+	}
+
+	return false;
 }
 
 void xenvif_unmap_frontend_rings(struct xenvif *vif)
-- 
cgit v1.2.2


From 2685d4106316e9033f73e631b3bbb9e385123c0a Mon Sep 17 00:00:00 2001
From: hayeswang <hayeswang@realtek.com>
Date: Fri, 7 Mar 2014 11:04:34 +0800
Subject: r8152: replace spin_lock_irqsave and spin_unlock_irqrestore

Use spin_lock and spin_unlock in interrupt context.

The ndo_start_xmit would not be called in interrupt context, so
replace the relative spin_lock_irqsave and spin_unlock_irqrestore
with spin_lock_bh and spin_unlock_bh.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/r8152.c | 28 ++++++++++++----------------
 1 file changed, 12 insertions(+), 16 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index b8eee365e15d..8ecb41b2df09 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -963,7 +963,6 @@ static int rtl8152_set_mac_address(struct net_device *netdev, void *p)
 static void read_bulk_callback(struct urb *urb)
 {
 	struct net_device *netdev;
-	unsigned long flags;
 	int status = urb->status;
 	struct rx_agg *agg;
 	struct r8152 *tp;
@@ -997,9 +996,9 @@ static void read_bulk_callback(struct urb *urb)
 		if (urb->actual_length < ETH_ZLEN)
 			break;
 
-		spin_lock_irqsave(&tp->rx_lock, flags);
+		spin_lock(&tp->rx_lock);
 		list_add_tail(&agg->list, &tp->rx_done);
-		spin_unlock_irqrestore(&tp->rx_lock, flags);
+		spin_unlock(&tp->rx_lock);
 		tasklet_schedule(&tp->tl);
 		return;
 	case -ESHUTDOWN:
@@ -1022,9 +1021,9 @@ static void read_bulk_callback(struct urb *urb)
 	if (result == -ENODEV) {
 		netif_device_detach(tp->netdev);
 	} else if (result) {
-		spin_lock_irqsave(&tp->rx_lock, flags);
+		spin_lock(&tp->rx_lock);
 		list_add_tail(&agg->list, &tp->rx_done);
-		spin_unlock_irqrestore(&tp->rx_lock, flags);
+		spin_unlock(&tp->rx_lock);
 		tasklet_schedule(&tp->tl);
 	}
 }
@@ -1033,7 +1032,6 @@ static void write_bulk_callback(struct urb *urb)
 {
 	struct net_device_stats *stats;
 	struct net_device *netdev;
-	unsigned long flags;
 	struct tx_agg *agg;
 	struct r8152 *tp;
 	int status = urb->status;
@@ -1057,9 +1055,9 @@ static void write_bulk_callback(struct urb *urb)
 		stats->tx_bytes += agg->skb_len;
 	}
 
-	spin_lock_irqsave(&tp->tx_lock, flags);
+	spin_lock(&tp->tx_lock);
 	list_add_tail(&agg->list, &tp->tx_free);
-	spin_unlock_irqrestore(&tp->tx_lock, flags);
+	spin_unlock(&tp->tx_lock);
 
 	usb_autopm_put_interface_async(tp->intf);
 
@@ -1330,14 +1328,13 @@ r8152_tx_csum(struct r8152 *tp, struct tx_desc *desc, struct sk_buff *skb)
 static int r8152_tx_agg_fill(struct r8152 *tp, struct tx_agg *agg)
 {
 	struct sk_buff_head skb_head, *tx_queue = &tp->tx_queue;
-	unsigned long flags;
 	int remain, ret;
 	u8 *tx_data;
 
 	__skb_queue_head_init(&skb_head);
-	spin_lock_irqsave(&tx_queue->lock, flags);
+	spin_lock_bh(&tx_queue->lock);
 	skb_queue_splice_init(tx_queue, &skb_head);
-	spin_unlock_irqrestore(&tx_queue->lock, flags);
+	spin_unlock_bh(&tx_queue->lock);
 
 	tx_data = agg->head;
 	agg->skb_num = agg->skb_len = 0;
@@ -1374,9 +1371,9 @@ static int r8152_tx_agg_fill(struct r8152 *tp, struct tx_agg *agg)
 	}
 
 	if (!skb_queue_empty(&skb_head)) {
-		spin_lock_irqsave(&tx_queue->lock, flags);
+		spin_lock_bh(&tx_queue->lock);
 		skb_queue_splice(&skb_head, tx_queue);
-		spin_unlock_irqrestore(&tx_queue->lock, flags);
+		spin_unlock_bh(&tx_queue->lock);
 	}
 
 	netif_tx_lock_bh(tp->netdev);
@@ -1551,16 +1548,15 @@ static void rtl_drop_queued_tx(struct r8152 *tp)
 {
 	struct net_device_stats *stats = &tp->netdev->stats;
 	struct sk_buff_head skb_head, *tx_queue = &tp->tx_queue;
-	unsigned long flags;
 	struct sk_buff *skb;
 
 	if (skb_queue_empty(tx_queue))
 		return;
 
 	__skb_queue_head_init(&skb_head);
-	spin_lock_irqsave(&tx_queue->lock, flags);
+	spin_lock_bh(&tx_queue->lock);
 	skb_queue_splice_init(tx_queue, &skb_head);
-	spin_unlock_irqrestore(&tx_queue->lock, flags);
+	spin_unlock_bh(&tx_queue->lock);
 
 	while ((skb = __skb_dequeue(&skb_head))) {
 		dev_kfree_skb(skb);
-- 
cgit v1.2.2


From 21949ab7df0d78b575c87c2e70192b487fd37511 Mon Sep 17 00:00:00 2001
From: hayeswang <hayeswang@realtek.com>
Date: Fri, 7 Mar 2014 11:04:35 +0800
Subject: r8152: check tx agg list before spin lock

Check tx agg list before spin lock to avoid doing spin lock every
times.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/r8152.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 8ecb41b2df09..00b3192568fe 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -1266,6 +1266,9 @@ static struct tx_agg *r8152_get_tx_agg(struct r8152 *tp)
 	struct tx_agg *agg = NULL;
 	unsigned long flags;
 
+	if (list_empty(&tp->tx_free))
+		return NULL;
+
 	spin_lock_irqsave(&tp->tx_lock, flags);
 	if (!list_empty(&tp->tx_free)) {
 		struct list_head *cursor;
-- 
cgit v1.2.2


From 0c3121fcf10da24dfd667c5bf8d71fcfa261599c Mon Sep 17 00:00:00 2001
From: hayeswang <hayeswang@realtek.com>
Date: Fri, 7 Mar 2014 11:04:36 +0800
Subject: r8152: up the priority of the transmission

move the tx_bottom() from delayed_work to tasklet. It makes the rx
and tx balanced. If the device is in runtime suspend when getting
the tx packet, wakeup the device before trasmitting.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/r8152.c | 45 +++++++++++++++++++++++++++------------------
 1 file changed, 27 insertions(+), 18 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 00b3192568fe..f1eaa18825ab 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -447,6 +447,7 @@ enum rtl8152_flags {
 	RTL8152_LINK_CHG,
 	SELECTIVE_SUSPEND,
 	PHY_RESET,
+	SCHEDULE_TASKLET,
 };
 
 /* Define these values to match your device */
@@ -1071,7 +1072,7 @@ static void write_bulk_callback(struct urb *urb)
 		return;
 
 	if (!skb_queue_empty(&tp->tx_queue))
-		schedule_delayed_work(&tp->schedule, 0);
+		tasklet_schedule(&tp->tl);
 }
 
 static void intr_callback(struct urb *urb)
@@ -1335,9 +1336,9 @@ static int r8152_tx_agg_fill(struct r8152 *tp, struct tx_agg *agg)
 	u8 *tx_data;
 
 	__skb_queue_head_init(&skb_head);
-	spin_lock_bh(&tx_queue->lock);
+	spin_lock(&tx_queue->lock);
 	skb_queue_splice_init(tx_queue, &skb_head);
-	spin_unlock_bh(&tx_queue->lock);
+	spin_unlock(&tx_queue->lock);
 
 	tx_data = agg->head;
 	agg->skb_num = agg->skb_len = 0;
@@ -1374,20 +1375,20 @@ static int r8152_tx_agg_fill(struct r8152 *tp, struct tx_agg *agg)
 	}
 
 	if (!skb_queue_empty(&skb_head)) {
-		spin_lock_bh(&tx_queue->lock);
+		spin_lock(&tx_queue->lock);
 		skb_queue_splice(&skb_head, tx_queue);
-		spin_unlock_bh(&tx_queue->lock);
+		spin_unlock(&tx_queue->lock);
 	}
 
-	netif_tx_lock_bh(tp->netdev);
+	netif_tx_lock(tp->netdev);
 
 	if (netif_queue_stopped(tp->netdev) &&
 	    skb_queue_len(&tp->tx_queue) < tp->tx_qlen)
 		netif_wake_queue(tp->netdev);
 
-	netif_tx_unlock_bh(tp->netdev);
+	netif_tx_unlock(tp->netdev);
 
-	ret = usb_autopm_get_interface(tp->intf);
+	ret = usb_autopm_get_interface_async(tp->intf);
 	if (ret < 0)
 		goto out_tx_fill;
 
@@ -1395,9 +1396,9 @@ static int r8152_tx_agg_fill(struct r8152 *tp, struct tx_agg *agg)
 			  agg->head, (int)(tx_data - (u8 *)agg->head),
 			  (usb_complete_t)write_bulk_callback, agg);
 
-	ret = usb_submit_urb(agg->urb, GFP_KERNEL);
+	ret = usb_submit_urb(agg->urb, GFP_ATOMIC);
 	if (ret < 0)
-		usb_autopm_put_interface(tp->intf);
+		usb_autopm_put_interface_async(tp->intf);
 
 out_tx_fill:
 	return ret;
@@ -1535,6 +1536,7 @@ static void bottom_half(unsigned long data)
 		return;
 
 	rx_bottom(tp);
+	tx_bottom(tp);
 }
 
 static
@@ -1630,7 +1632,7 @@ static void _rtl8152_set_rx_mode(struct net_device *netdev)
 }
 
 static netdev_tx_t rtl8152_start_xmit(struct sk_buff *skb,
-					    struct net_device *netdev)
+					struct net_device *netdev)
 {
 	struct r8152 *tp = netdev_priv(netdev);
 
@@ -1638,13 +1640,17 @@ static netdev_tx_t rtl8152_start_xmit(struct sk_buff *skb,
 
 	skb_queue_tail(&tp->tx_queue, skb);
 
-	if (list_empty(&tp->tx_free) &&
-	    skb_queue_len(&tp->tx_queue) > tp->tx_qlen)
+	if (!list_empty(&tp->tx_free)) {
+		if (test_bit(SELECTIVE_SUSPEND, &tp->flags)) {
+			set_bit(SCHEDULE_TASKLET, &tp->flags);
+			schedule_delayed_work(&tp->schedule, 0);
+		} else {
+			usb_mark_last_busy(tp->udev);
+			tasklet_schedule(&tp->tl);
+		}
+	} else if (skb_queue_len(&tp->tx_queue) > tp->tx_qlen)
 		netif_stop_queue(netdev);
 
-	if (!list_empty(&tp->tx_free))
-		schedule_delayed_work(&tp->schedule, 0);
-
 	return NETDEV_TX_OK;
 }
 
@@ -2523,8 +2529,11 @@ static void rtl_work_func_t(struct work_struct *work)
 	if (test_bit(RTL8152_SET_RX_MODE, &tp->flags))
 		_rtl8152_set_rx_mode(tp->netdev);
 
-	if (tp->speed & LINK_STATUS)
-		tx_bottom(tp);
+	if (test_bit(SCHEDULE_TASKLET, &tp->flags) &&
+	    (tp->speed & LINK_STATUS)) {
+		clear_bit(SCHEDULE_TASKLET, &tp->flags);
+		tasklet_schedule(&tp->tl);
+	}
 
 	if (test_bit(PHY_RESET, &tp->flags))
 		rtl_phy_reset(tp);
-- 
cgit v1.2.2


From 5e2f7485d233ecd231ea298200d9c9a55c5542f1 Mon Sep 17 00:00:00 2001
From: hayeswang <hayeswang@realtek.com>
Date: Fri, 7 Mar 2014 11:04:37 +0800
Subject: r8152: calculate the dropped packets for rx

Continue dealing with the remain rx packets, even though the allocation
of the skb fail. This could calculate the correct dropped packets.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/r8152.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index f1eaa18825ab..08f4e87078e5 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -1456,7 +1456,7 @@ static void rx_bottom(struct r8152 *tp)
 			skb = netdev_alloc_skb_ip_align(netdev, pkt_len);
 			if (!skb) {
 				stats->rx_dropped++;
-				break;
+				goto find_next_rx;
 			}
 			memcpy(skb->data, rx_data, pkt_len);
 			skb_put(skb, pkt_len);
@@ -1465,6 +1465,7 @@ static void rx_bottom(struct r8152 *tp)
 			stats->rx_packets++;
 			stats->rx_bytes += pkt_len;
 
+find_next_rx:
 			rx_data = rx_agg_align(rx_data + pkt_len + CRC_SIZE);
 			rx_desc = (struct rx_desc *)rx_data;
 			len_used = (int)(rx_data - (u8 *)agg->head);
-- 
cgit v1.2.2


From 565cab0a69e86eb6c10a8d8d4793d34ebd2c077b Mon Sep 17 00:00:00 2001
From: hayeswang <hayeswang@realtek.com>
Date: Fri, 7 Mar 2014 11:04:38 +0800
Subject: r8152: support rx checksum

Support hw rx checksum for TCP and UDP packets.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/r8152.c | 41 +++++++++++++++++++++++++++++++++++++++--
 1 file changed, 39 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 08f4e87078e5..8bb8782c05de 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -467,8 +467,17 @@ enum rtl8152_flags {
 struct rx_desc {
 	__le32 opts1;
 #define RX_LEN_MASK			0x7fff
+
 	__le32 opts2;
+#define RD_UDP_CS			(1 << 23)
+#define RD_TCP_CS			(1 << 22)
+#define RD_IPV4_CS			(1 << 19)
+
 	__le32 opts3;
+#define IPF				(1 << 23) /* IP checksum fail */
+#define UDPF				(1 << 22) /* UDP checksum fail */
+#define TCPF				(1 << 21) /* TCP checksum fail */
+
 	__le32 opts4;
 	__le32 opts5;
 	__le32 opts6;
@@ -1404,6 +1413,32 @@ out_tx_fill:
 	return ret;
 }
 
+static u8 r8152_rx_csum(struct r8152 *tp, struct rx_desc *rx_desc)
+{
+	u8 checksum = CHECKSUM_NONE;
+	u32 opts2, opts3;
+
+	if (tp->version == RTL_VER_01)
+		goto return_result;
+
+	opts2 = le32_to_cpu(rx_desc->opts2);
+	opts3 = le32_to_cpu(rx_desc->opts3);
+
+	if (opts2 & RD_IPV4_CS) {
+		if (opts3 & IPF)
+			checksum = CHECKSUM_NONE;
+		else if ((opts2 & RD_UDP_CS) && (opts3 & UDPF))
+			checksum = CHECKSUM_NONE;
+		else if ((opts2 & RD_TCP_CS) && (opts3 & TCPF))
+			checksum = CHECKSUM_NONE;
+		else
+			checksum = CHECKSUM_UNNECESSARY;
+	}
+
+return_result:
+	return checksum;
+}
+
 static void rx_bottom(struct r8152 *tp)
 {
 	unsigned long flags;
@@ -1458,6 +1493,8 @@ static void rx_bottom(struct r8152 *tp)
 				stats->rx_dropped++;
 				goto find_next_rx;
 			}
+
+			skb->ip_summed = r8152_rx_csum(tp, rx_desc);
 			memcpy(skb->data, rx_data, pkt_len);
 			skb_put(skb, pkt_len);
 			skb->protocol = eth_type_trans(skb, netdev);
@@ -3103,8 +3140,8 @@ static int rtl8152_probe(struct usb_interface *intf,
 	netdev->netdev_ops = &rtl8152_netdev_ops;
 	netdev->watchdog_timeo = RTL8152_TX_TIMEOUT;
 
-	netdev->features |= NETIF_F_IP_CSUM;
-	netdev->hw_features = NETIF_F_IP_CSUM;
+	netdev->features |= NETIF_F_RXCSUM | NETIF_F_IP_CSUM;
+	netdev->hw_features = NETIF_F_RXCSUM | NETIF_F_IP_CSUM;
 
 	SET_ETHTOOL_OPS(netdev, &ops);
 
-- 
cgit v1.2.2


From 60c890713ea36add18a5f01f02a67d045c707fc6 Mon Sep 17 00:00:00 2001
From: hayeswang <hayeswang@realtek.com>
Date: Fri, 7 Mar 2014 11:04:39 +0800
Subject: r8152: support TSO

Support scatter gather and TSO.

Adjust the tx checksum function and set the max gso size to fix the
size of the tx aggregation buffer.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/r8152.c | 117 +++++++++++++++++++++++++++++++++++-------------
 1 file changed, 87 insertions(+), 30 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 8bb8782c05de..b23b2ae0bddc 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -23,7 +23,7 @@
 #include <linux/ipv6.h>
 
 /* Version Information */
-#define DRIVER_VERSION "v1.05.0 (2014/02/18)"
+#define DRIVER_VERSION "v1.06.0 (2014/03/03)"
 #define DRIVER_AUTHOR "Realtek linux nic maintainers <nic_swsd@realtek.com>"
 #define DRIVER_DESC "Realtek RTL8152/RTL8153 Based USB Ethernet Adapters"
 #define MODULENAME "r8152"
@@ -487,13 +487,18 @@ struct tx_desc {
 	__le32 opts1;
 #define TX_FS			(1 << 31) /* First segment of a packet */
 #define TX_LS			(1 << 30) /* Final segment of a packet */
-#define TX_LEN_MASK		0x3ffff
+#define GTSENDV4		(1 << 28)
+#define GTTCPHO_SHIFT		18
+#define TX_LEN_MAX		0x3ffffU
 
 	__le32 opts2;
 #define UDP_CS			(1 << 31) /* Calculate UDP/IP checksum */
 #define TCP_CS			(1 << 30) /* Calculate TCP/IP checksum */
 #define IPV4_CS			(1 << 29) /* Calculate IPv4 checksum */
 #define IPV6_CS			(1 << 28) /* Calculate IPv6 checksum */
+#define MSS_SHIFT		17
+#define MSS_MAX			0x7ffU
+#define TCPHO_SHIFT		17
 };
 
 struct r8152;
@@ -560,12 +565,21 @@ enum rtl_version {
 	RTL_VER_MAX
 };
 
+enum tx_csum_stat {
+	TX_CSUM_SUCCESS = 0,
+	TX_CSUM_TSO,
+	TX_CSUM_NONE
+};
+
 /* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
  * The RTL chips use a 64 element hash table based on the Ethernet CRC.
  */
 static const int multicast_filter_limit = 32;
 static unsigned int rx_buf_sz = 16384;
 
+#define RTL_LIMITED_TSO_SIZE	(rx_buf_sz - sizeof(struct tx_desc) - \
+				 VLAN_ETH_HLEN - VLAN_HLEN)
+
 static
 int get_registers(struct r8152 *tp, u16 value, u16 index, u16 size, void *data)
 {
@@ -1292,24 +1306,46 @@ static struct tx_agg *r8152_get_tx_agg(struct r8152 *tp)
 	return agg;
 }
 
-static void
-r8152_tx_csum(struct r8152 *tp, struct tx_desc *desc, struct sk_buff *skb)
+static inline __be16 get_protocol(struct sk_buff *skb)
 {
-	memset(desc, 0, sizeof(*desc));
+	__be16 protocol;
 
-	desc->opts1 = cpu_to_le32((skb->len & TX_LEN_MASK) | TX_FS | TX_LS);
+	if (skb->protocol == htons(ETH_P_8021Q))
+		protocol = vlan_eth_hdr(skb)->h_vlan_encapsulated_proto;
+	else
+		protocol = skb->protocol;
 
-	if (skb->ip_summed == CHECKSUM_PARTIAL) {
-		__be16 protocol;
-		u8 ip_protocol;
-		u32 opts2 = 0;
+	return protocol;
+}
 
-		if (skb->protocol == htons(ETH_P_8021Q))
-			protocol = vlan_eth_hdr(skb)->h_vlan_encapsulated_proto;
-		else
-			protocol = skb->protocol;
+static int r8152_tx_csum(struct r8152 *tp, struct tx_desc *desc,
+			 struct sk_buff *skb, u32 len, u32 transport_offset)
+{
+	u32 mss = skb_shinfo(skb)->gso_size;
+	u32 opts1, opts2 = 0;
+	int ret = TX_CSUM_SUCCESS;
+
+	WARN_ON_ONCE(len > TX_LEN_MAX);
+
+	opts1 = len | TX_FS | TX_LS;
+
+	if (mss) {
+		switch (get_protocol(skb)) {
+		case htons(ETH_P_IP):
+			opts1 |= GTSENDV4;
+			break;
+
+		default:
+			WARN_ON_ONCE(1);
+			break;
+		}
+
+		opts1 |= transport_offset << GTTCPHO_SHIFT;
+		opts2 |= min(mss, MSS_MAX) << MSS_SHIFT;
+	} else if (skb->ip_summed == CHECKSUM_PARTIAL) {
+		u8 ip_protocol;
 
-		switch (protocol) {
+		switch (get_protocol(skb)) {
 		case htons(ETH_P_IP):
 			opts2 |= IPV4_CS;
 			ip_protocol = ip_hdr(skb)->protocol;
@@ -1325,17 +1361,20 @@ r8152_tx_csum(struct r8152 *tp, struct tx_desc *desc, struct sk_buff *skb)
 			break;
 		}
 
-		if (ip_protocol == IPPROTO_TCP) {
+		if (ip_protocol == IPPROTO_TCP)
 			opts2 |= TCP_CS;
-			opts2 |= (skb_transport_offset(skb) & 0x7fff) << 17;
-		} else if (ip_protocol == IPPROTO_UDP) {
+		else if (ip_protocol == IPPROTO_UDP)
 			opts2 |= UDP_CS;
-		} else {
+		else
 			WARN_ON_ONCE(1);
-		}
 
-		desc->opts2 = cpu_to_le32(opts2);
+		opts2 |= transport_offset << TCPHO_SHIFT;
 	}
+
+	desc->opts2 = cpu_to_le32(opts2);
+	desc->opts1 = cpu_to_le32(opts1);
+
+	return ret;
 }
 
 static int r8152_tx_agg_fill(struct r8152 *tp, struct tx_agg *agg)
@@ -1357,29 +1396,44 @@ static int r8152_tx_agg_fill(struct r8152 *tp, struct tx_agg *agg)
 		struct tx_desc *tx_desc;
 		struct sk_buff *skb;
 		unsigned int len;
+		u32 offset;
 
 		skb = __skb_dequeue(&skb_head);
 		if (!skb)
 			break;
 
-		remain -= sizeof(*tx_desc);
-		len = skb->len;
-		if (remain < len) {
+		len = skb->len + sizeof(*tx_desc);
+
+		if (len > remain) {
 			__skb_queue_head(&skb_head, skb);
 			break;
 		}
 
 		tx_data = tx_agg_align(tx_data);
 		tx_desc = (struct tx_desc *)tx_data;
+
+		offset = (u32)skb_transport_offset(skb);
+
+		r8152_tx_csum(tp, tx_desc, skb, skb->len, offset);
+
 		tx_data += sizeof(*tx_desc);
 
-		r8152_tx_csum(tp, tx_desc, skb);
-		memcpy(tx_data, skb->data, len);
-		agg->skb_num++;
+		len = skb->len;
+		if (skb_copy_bits(skb, 0, tx_data, len) < 0) {
+			struct net_device_stats *stats = &tp->netdev->stats;
+
+			stats->tx_dropped++;
+			dev_kfree_skb_any(skb);
+			tx_data -= sizeof(*tx_desc);
+			continue;
+		}
+
+		tx_data += len;
 		agg->skb_len += len;
+		agg->skb_num++;
+
 		dev_kfree_skb_any(skb);
 
-		tx_data += len;
 		remain = rx_buf_sz - (int)(tx_agg_align(tx_data) - agg->head);
 	}
 
@@ -3140,10 +3194,13 @@ static int rtl8152_probe(struct usb_interface *intf,
 	netdev->netdev_ops = &rtl8152_netdev_ops;
 	netdev->watchdog_timeo = RTL8152_TX_TIMEOUT;
 
-	netdev->features |= NETIF_F_RXCSUM | NETIF_F_IP_CSUM;
-	netdev->hw_features = NETIF_F_RXCSUM | NETIF_F_IP_CSUM;
+	netdev->features |= NETIF_F_RXCSUM | NETIF_F_IP_CSUM | NETIF_F_SG |
+			    NETIF_F_TSO | NETIF_F_FRAGLIST;
+	netdev->hw_features = NETIF_F_RXCSUM | NETIF_F_IP_CSUM | NETIF_F_SG |
+			      NETIF_F_TSO | NETIF_F_FRAGLIST;
 
 	SET_ETHTOOL_OPS(netdev, &ops);
+	netif_set_gso_max_size(netdev, RTL_LIMITED_TSO_SIZE);
 
 	tp->mii.dev = netdev;
 	tp->mii.mdio_read = read_mii_word;
-- 
cgit v1.2.2


From 6128d1bb30748d0ff56a63898d14f312126e404c Mon Sep 17 00:00:00 2001
From: hayeswang <hayeswang@realtek.com>
Date: Fri, 7 Mar 2014 11:04:40 +0800
Subject: r8152: support IPv6

Support hw IPv6 checksum for TCP and UDP packets.

Note that the hw has the limitation of the range of the transport
offset. Besides, the TCP Pseudo Header of the IPv6 TSO of the hw
bases on the Microsoft document which excludes the packet length.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/r8152.c | 106 ++++++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 103 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index b23b2ae0bddc..c7ef30dee1b9 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -21,6 +21,7 @@
 #include <linux/list.h>
 #include <linux/ip.h>
 #include <linux/ipv6.h>
+#include <net/ip6_checksum.h>
 
 /* Version Information */
 #define DRIVER_VERSION "v1.06.0 (2014/03/03)"
@@ -471,6 +472,7 @@ struct rx_desc {
 	__le32 opts2;
 #define RD_UDP_CS			(1 << 23)
 #define RD_TCP_CS			(1 << 22)
+#define RD_IPV6_CS			(1 << 20)
 #define RD_IPV4_CS			(1 << 19)
 
 	__le32 opts3;
@@ -488,7 +490,9 @@ struct tx_desc {
 #define TX_FS			(1 << 31) /* First segment of a packet */
 #define TX_LS			(1 << 30) /* Final segment of a packet */
 #define GTSENDV4		(1 << 28)
+#define GTSENDV6		(1 << 27)
 #define GTTCPHO_SHIFT		18
+#define GTTCPHO_MAX		0x7fU
 #define TX_LEN_MAX		0x3ffffU
 
 	__le32 opts2;
@@ -499,6 +503,7 @@ struct tx_desc {
 #define MSS_SHIFT		17
 #define MSS_MAX			0x7ffU
 #define TCPHO_SHIFT		17
+#define TCPHO_MAX		0x7ffU
 };
 
 struct r8152;
@@ -1318,6 +1323,69 @@ static inline __be16 get_protocol(struct sk_buff *skb)
 	return protocol;
 }
 
+/*
+ * r8152_csum_workaround()
+ * The hw limites the value the transport offset. When the offset is out of the
+ * range, calculate the checksum by sw.
+ */
+static void r8152_csum_workaround(struct r8152 *tp, struct sk_buff *skb,
+				  struct sk_buff_head *list)
+{
+	if (skb_shinfo(skb)->gso_size) {
+		netdev_features_t features = tp->netdev->features;
+		struct sk_buff_head seg_list;
+		struct sk_buff *segs, *nskb;
+
+		features &= ~(NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_TSO);
+		segs = skb_gso_segment(skb, features);
+		if (IS_ERR(segs) || !segs)
+			goto drop;
+
+		__skb_queue_head_init(&seg_list);
+
+		do {
+			nskb = segs;
+			segs = segs->next;
+			nskb->next = NULL;
+			__skb_queue_tail(&seg_list, nskb);
+		} while (segs);
+
+		skb_queue_splice(&seg_list, list);
+		dev_kfree_skb(skb);
+	} else if (skb->ip_summed == CHECKSUM_PARTIAL) {
+		if (skb_checksum_help(skb) < 0)
+			goto drop;
+
+		__skb_queue_head(list, skb);
+	} else {
+		struct net_device_stats *stats;
+
+drop:
+		stats = &tp->netdev->stats;
+		stats->tx_dropped++;
+		dev_kfree_skb(skb);
+	}
+}
+
+/*
+ * msdn_giant_send_check()
+ * According to the document of microsoft, the TCP Pseudo Header excludes the
+ * packet length for IPv6 TCP large packets.
+ */
+static int msdn_giant_send_check(struct sk_buff *skb)
+{
+	const struct ipv6hdr *ipv6h;
+	struct tcphdr *th;
+
+	ipv6h = ipv6_hdr(skb);
+	th = tcp_hdr(skb);
+
+	th->check = 0;
+	th->check = ~tcp_v6_check(0, &ipv6h->saddr, &ipv6h->daddr, 0);
+
+	return 0;
+}
+
 static int r8152_tx_csum(struct r8152 *tp, struct tx_desc *desc,
 			 struct sk_buff *skb, u32 len, u32 transport_offset)
 {
@@ -1330,11 +1398,24 @@ static int r8152_tx_csum(struct r8152 *tp, struct tx_desc *desc,
 	opts1 = len | TX_FS | TX_LS;
 
 	if (mss) {
+		if (transport_offset > GTTCPHO_MAX) {
+			netif_warn(tp, tx_err, tp->netdev,
+				   "Invalid transport offset 0x%x for TSO\n",
+				   transport_offset);
+			ret = TX_CSUM_TSO;
+			goto unavailable;
+		}
+
 		switch (get_protocol(skb)) {
 		case htons(ETH_P_IP):
 			opts1 |= GTSENDV4;
 			break;
 
+		case htons(ETH_P_IPV6):
+			opts1 |= GTSENDV6;
+			msdn_giant_send_check(skb);
+			break;
+
 		default:
 			WARN_ON_ONCE(1);
 			break;
@@ -1345,6 +1426,14 @@ static int r8152_tx_csum(struct r8152 *tp, struct tx_desc *desc,
 	} else if (skb->ip_summed == CHECKSUM_PARTIAL) {
 		u8 ip_protocol;
 
+		if (transport_offset > TCPHO_MAX) {
+			netif_warn(tp, tx_err, tp->netdev,
+				   "Invalid transport offset 0x%x\n",
+				   transport_offset);
+			ret = TX_CSUM_NONE;
+			goto unavailable;
+		}
+
 		switch (get_protocol(skb)) {
 		case htons(ETH_P_IP):
 			opts2 |= IPV4_CS;
@@ -1374,6 +1463,7 @@ static int r8152_tx_csum(struct r8152 *tp, struct tx_desc *desc,
 	desc->opts2 = cpu_to_le32(opts2);
 	desc->opts1 = cpu_to_le32(opts1);
 
+unavailable:
 	return ret;
 }
 
@@ -1414,7 +1504,10 @@ static int r8152_tx_agg_fill(struct r8152 *tp, struct tx_agg *agg)
 
 		offset = (u32)skb_transport_offset(skb);
 
-		r8152_tx_csum(tp, tx_desc, skb, skb->len, offset);
+		if (r8152_tx_csum(tp, tx_desc, skb, skb->len, offset)) {
+			r8152_csum_workaround(tp, skb, &skb_head);
+			continue;
+		}
 
 		tx_data += sizeof(*tx_desc);
 
@@ -1487,6 +1580,11 @@ static u8 r8152_rx_csum(struct r8152 *tp, struct rx_desc *rx_desc)
 			checksum = CHECKSUM_NONE;
 		else
 			checksum = CHECKSUM_UNNECESSARY;
+	} else if (RD_IPV6_CS) {
+		if ((opts2 & RD_UDP_CS) && !(opts3 & UDPF))
+			checksum = CHECKSUM_UNNECESSARY;
+		else if ((opts2 & RD_TCP_CS) && !(opts3 & TCPF))
+			checksum = CHECKSUM_UNNECESSARY;
 	}
 
 return_result:
@@ -3195,9 +3293,11 @@ static int rtl8152_probe(struct usb_interface *intf,
 	netdev->watchdog_timeo = RTL8152_TX_TIMEOUT;
 
 	netdev->features |= NETIF_F_RXCSUM | NETIF_F_IP_CSUM | NETIF_F_SG |
-			    NETIF_F_TSO | NETIF_F_FRAGLIST;
+			    NETIF_F_TSO | NETIF_F_FRAGLIST | NETIF_F_IPV6_CSUM |
+			    NETIF_F_TSO6;
 	netdev->hw_features = NETIF_F_RXCSUM | NETIF_F_IP_CSUM | NETIF_F_SG |
-			      NETIF_F_TSO | NETIF_F_FRAGLIST;
+			      NETIF_F_TSO | NETIF_F_FRAGLIST |
+			      NETIF_F_IPV6_CSUM | NETIF_F_TSO6;
 
 	SET_ETHTOOL_OPS(netdev, &ops);
 	netif_set_gso_max_size(netdev, RTL_LIMITED_TSO_SIZE);
-- 
cgit v1.2.2


From 6c2ed39c1c0a7118b89394c26e86a24e5070e579 Mon Sep 17 00:00:00 2001
From: Todd Fujinaka <todd.fujinaka@intel.com>
Date: Sat, 18 Jan 2014 06:09:33 +0000
Subject: e1000e: PTP lock in e1000e_phc_adjustfreq

Add lock in e1000e_phc_adjfreq to prevent concurrent changes to TIMINCA
and SYSTIMH/L.

Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/e1000e/ptp.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/e1000e/ptp.c b/drivers/net/ethernet/intel/e1000e/ptp.c
index 065f8c80d4f2..e24160de4926 100644
--- a/drivers/net/ethernet/intel/e1000e/ptp.c
+++ b/drivers/net/ethernet/intel/e1000e/ptp.c
@@ -47,6 +47,7 @@ static int e1000e_phc_adjfreq(struct ptp_clock_info *ptp, s32 delta)
 						     ptp_clock_info);
 	struct e1000_hw *hw = &adapter->hw;
 	bool neg_adj = false;
+	unsigned long flags;
 	u64 adjustment;
 	u32 timinca, incvalue;
 	s32 ret_val;
@@ -64,6 +65,8 @@ static int e1000e_phc_adjfreq(struct ptp_clock_info *ptp, s32 delta)
 	if (ret_val)
 		return ret_val;
 
+	spin_lock_irqsave(&adapter->systim_lock, flags);
+
 	incvalue = timinca & E1000_TIMINCA_INCVALUE_MASK;
 
 	adjustment = incvalue;
@@ -77,6 +80,8 @@ static int e1000e_phc_adjfreq(struct ptp_clock_info *ptp, s32 delta)
 
 	ew32(TIMINCA, timinca);
 
+	spin_unlock_irqrestore(&adapter->systim_lock, flags);
+
 	return 0;
 }
 
-- 
cgit v1.2.2


From b485dbaecdee2fec7d973de50a48d284dec532f1 Mon Sep 17 00:00:00 2001
From: David Ertman <davidx.m.ertman@intel.com>
Date: Wed, 22 Jan 2014 00:21:41 +0000
Subject: e1000e: Cleanup unecessary references

Cleaning up some pointer references that are no longer necessary

Signed-off-by: Dave Ertman <davidx.m.ertman@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/e1000e/netdev.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index e6f8961d49eb..1f144e974c61 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -1701,7 +1701,7 @@ static void e1000_clean_rx_ring(struct e1000_ring *rx_ring)
 	adapter->flags2 &= ~FLAG2_IS_DISCARDING;
 
 	writel(0, rx_ring->head);
-	if (rx_ring->adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
+	if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
 		e1000e_update_rdt_wa(rx_ring, 0);
 	else
 		writel(0, rx_ring->tail);
@@ -2405,7 +2405,7 @@ static void e1000_clean_tx_ring(struct e1000_ring *tx_ring)
 	tx_ring->next_to_clean = 0;
 
 	writel(0, tx_ring->head);
-	if (tx_ring->adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
+	if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
 		e1000e_update_tdt_wa(tx_ring, 0);
 	else
 		writel(0, tx_ring->tail);
-- 
cgit v1.2.2


From f7235ef66938ac3db51762c5dbab9f849fa9e795 Mon Sep 17 00:00:00 2001
From: David Ertman <davidx.m.ertman@intel.com>
Date: Thu, 23 Jan 2014 06:29:13 +0000
Subject: e1000e: Resolve issues with Management Engine (ME) briefly blocking
 PHY resets

On a ME enabled system with the cable out, the driver init flow would
generate an erroneous message indicating that resets were being blocked
by an active ME session.  Cause was ME clearing the semaphore bit to
block further PHY resets for up to 50 msec during power-on/cycle.  After
this interval, ME would re-set the bit and allow PHY resets.

To resolve this, change the flow of e1000e_phy_hw_reset_generic() to
utilize a delay and retry method.  Poll the FWSM register to minimize
any extra time added to the flow.  If the delay times out at 100ms
(checked in 10msec increments), then return the value E1000_BLK_PHY_RESET,
as this is the accurate state of the PHY.  Attempting to alter just the
call to e1000e_phy_hw_reset_generic() in e1000_init_phy_workarounds_pchlan()
just caused the problem to move further down the flow.

Signed-off-by: Dave Ertman <davidx.m.ertman@intel.com>
Acked-by: Bruce W. Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/e1000e/ich8lan.c | 30 +++++++++++++++++++++++++----
 1 file changed, 26 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 42f0f6717511..4f3da87f0cef 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -247,6 +247,7 @@ out:
  **/
 static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw)
 {
+	struct e1000_adapter *adapter = hw->adapter;
 	u32 mac_reg, fwsm = er32(FWSM);
 	s32 ret_val;
 
@@ -349,12 +350,31 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw)
 
 	hw->phy.ops.release(hw);
 	if (!ret_val) {
+
+		/* Check to see if able to reset PHY.  Print error if not */
+		if (hw->phy.ops.check_reset_block(hw)) {
+			e_err("Reset blocked by ME\n");
+			goto out;
+		}
+
 		/* Reset the PHY before any access to it.  Doing so, ensures
 		 * that the PHY is in a known good state before we read/write
 		 * PHY registers.  The generic reset is sufficient here,
 		 * because we haven't determined the PHY type yet.
 		 */
 		ret_val = e1000e_phy_hw_reset_generic(hw);
+		if (ret_val)
+			goto out;
+
+		/* On a successful reset, possibly need to wait for the PHY
+		 * to quiesce to an accessible state before returning control
+		 * to the calling function.  If the PHY does not quiesce, then
+		 * return E1000E_BLK_PHY_RESET, as this is the condition that
+		 *  the PHY is in.
+		 */
+		ret_val = hw->phy.ops.check_reset_block(hw);
+		if (ret_val)
+			e_err("ME blocked access to PHY after reset\n");
 	}
 
 out:
@@ -1484,11 +1504,13 @@ out:
  **/
 static s32 e1000_check_reset_block_ich8lan(struct e1000_hw *hw)
 {
-	u32 fwsm;
+	bool blocked = false;
+	int i = 0;
 
-	fwsm = er32(FWSM);
-
-	return (fwsm & E1000_ICH_FWSM_RSPCIPHY) ? 0 : E1000_BLK_PHY_RESET;
+	while ((blocked = !(er32(FWSM) & E1000_ICH_FWSM_RSPCIPHY)) &&
+	       (i++ < 10))
+		usleep_range(10000, 20000);
+	return blocked ? E1000_BLK_PHY_RESET : 0;
 }
 
 /**
-- 
cgit v1.2.2


From a03206edfffdeea34e7246b5a0e0da6651511062 Mon Sep 17 00:00:00 2001
From: David Ertman <davidx.m.ertman@intel.com>
Date: Fri, 24 Jan 2014 23:07:48 +0000
Subject: e1000e: Fix 82579 sets LPI too early.

Enabling EEE LPI sooner than one second after link up on 82579 causes link
issues with some switches.

Remove EEE enablement for 82579 parts from the link initialization flow to
avoid initializing too early.  EEE initialization for 82579 will be done
in e1000e_update_phy_task.

Signed-off-by: Dave Ertman <davidx.m.ertman@intel.com>
Acked-by: Bruce W Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/e1000e/ich8lan.c | 16 ++++++++++++----
 drivers/net/ethernet/intel/e1000e/ich8lan.h |  1 +
 drivers/net/ethernet/intel/e1000e/netdev.c  |  7 ++++++-
 3 files changed, 19 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 4f3da87f0cef..42cc537a8657 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -744,8 +744,14 @@ s32 e1000_write_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 data)
  *  Enable/disable EEE based on setting in dev_spec structure, the duplex of
  *  the link and the EEE capabilities of the link partner.  The LPI Control
  *  register bits will remain set only if/when link is up.
+ *
+ *  EEE LPI must not be asserted earlier than one second after link is up.
+ *  On 82579, EEE LPI should not be enabled until such time otherwise there
+ *  can be link issues with some switches.  Other devices can have EEE LPI
+ *  enabled immediately upon link up since they have a timer in hardware which
+ *  prevents LPI from being asserted too early.
  **/
-static s32 e1000_set_eee_pchlan(struct e1000_hw *hw)
+s32 e1000_set_eee_pchlan(struct e1000_hw *hw)
 {
 	struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
 	s32 ret_val;
@@ -1126,9 +1132,11 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
 	e1000e_check_downshift(hw);
 
 	/* Enable/Disable EEE after link up */
-	ret_val = e1000_set_eee_pchlan(hw);
-	if (ret_val)
-		return ret_val;
+	if (hw->phy.type > e1000_phy_82579) {
+		ret_val = e1000_set_eee_pchlan(hw);
+		if (ret_val)
+			return ret_val;
+	}
 
 	/* If we are forcing speed/duplex, then we simply return since
 	 * we have already determined whether we have link or not.
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.h b/drivers/net/ethernet/intel/e1000e/ich8lan.h
index 217090df33e7..707bf4dace49 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.h
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.h
@@ -268,4 +268,5 @@ void e1000_copy_rx_addrs_to_phy_ich8lan(struct e1000_hw *hw);
 s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable);
 s32 e1000_read_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 *data);
 s32 e1000_write_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 data);
+s32 e1000_set_eee_pchlan(struct e1000_hw *hw);
 #endif /* _E1000E_ICH8LAN_H_ */
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 1f144e974c61..94bd92da29fa 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -4463,11 +4463,16 @@ static void e1000e_update_phy_task(struct work_struct *work)
 	struct e1000_adapter *adapter = container_of(work,
 						     struct e1000_adapter,
 						     update_phy_task);
+	struct e1000_hw *hw = &adapter->hw;
 
 	if (test_bit(__E1000_DOWN, &adapter->state))
 		return;
 
-	e1000_get_phy_info(&adapter->hw);
+	e1000_get_phy_info(hw);
+
+	/* Enable EEE on 82579 after link up */
+	if (hw->phy.type == e1000_phy_82579)
+		e1000_set_eee_pchlan(hw);
 }
 
 /**
-- 
cgit v1.2.2


From e78b80b1079e1269ca57c28abda790555b546a5f Mon Sep 17 00:00:00 2001
From: David Ertman <davidx.m.ertman@intel.com>
Date: Tue, 4 Feb 2014 01:56:06 +0000
Subject: e1000e: Cleanup - Update GPL header and Copyright

This patch is to update the GPL header by removing the portion that
refers to the Free Software Foundation address.

Change the copyright date for 2014.

Reformat the header comments to conform to kernel networking coding norms

Signed-off-by: Dave Ertman <davidx.m.ertman@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/e1000e/80003es2lan.c | 47 ++++++++++--------------
 drivers/net/ethernet/intel/e1000e/80003es2lan.h | 47 ++++++++++--------------
 drivers/net/ethernet/intel/e1000e/82571.c       | 47 ++++++++++--------------
 drivers/net/ethernet/intel/e1000e/82571.h       | 47 ++++++++++--------------
 drivers/net/ethernet/intel/e1000e/Makefile      |  7 ++--
 drivers/net/ethernet/intel/e1000e/defines.h     | 47 ++++++++++--------------
 drivers/net/ethernet/intel/e1000e/e1000.h       | 47 ++++++++++--------------
 drivers/net/ethernet/intel/e1000e/ethtool.c     | 47 ++++++++++--------------
 drivers/net/ethernet/intel/e1000e/hw.h          | 47 ++++++++++--------------
 drivers/net/ethernet/intel/e1000e/ich8lan.c     | 47 ++++++++++--------------
 drivers/net/ethernet/intel/e1000e/ich8lan.h     | 47 ++++++++++--------------
 drivers/net/ethernet/intel/e1000e/mac.c         | 47 ++++++++++--------------
 drivers/net/ethernet/intel/e1000e/mac.h         | 47 ++++++++++--------------
 drivers/net/ethernet/intel/e1000e/manage.c      | 47 ++++++++++--------------
 drivers/net/ethernet/intel/e1000e/manage.h      | 47 ++++++++++--------------
 drivers/net/ethernet/intel/e1000e/netdev.c      | 49 +++++++++++--------------
 drivers/net/ethernet/intel/e1000e/nvm.c         | 47 ++++++++++--------------
 drivers/net/ethernet/intel/e1000e/nvm.h         | 47 ++++++++++--------------
 drivers/net/ethernet/intel/e1000e/param.c       | 47 ++++++++++--------------
 drivers/net/ethernet/intel/e1000e/phy.c         | 47 ++++++++++--------------
 drivers/net/ethernet/intel/e1000e/phy.h         | 47 ++++++++++--------------
 drivers/net/ethernet/intel/e1000e/ptp.c         | 47 ++++++++++--------------
 drivers/net/ethernet/intel/e1000e/regs.h        | 47 ++++++++++--------------
 23 files changed, 444 insertions(+), 599 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/e1000e/80003es2lan.c b/drivers/net/ethernet/intel/e1000e/80003es2lan.c
index ff2d806eaef7..a5f6b11d6992 100644
--- a/drivers/net/ethernet/intel/e1000e/80003es2lan.c
+++ b/drivers/net/ethernet/intel/e1000e/80003es2lan.c
@@ -1,30 +1,23 @@
-/*******************************************************************************
-
-  Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2013 Intel Corporation.
-
-  This program is free software; you can redistribute it and/or modify it
-  under the terms and conditions of the GNU General Public License,
-  version 2, as published by the Free Software Foundation.
-
-  This program is distributed in the hope it will be useful, but WITHOUT
-  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
-  more details.
-
-  You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc.,
-  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
-  The full GNU General Public License is included in this distribution in
-  the file called "COPYING".
-
-  Contact Information:
-  Linux NICS <linux.nics@intel.com>
-  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+/* Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
 
 /* 80003ES2LAN Gigabit Ethernet Controller (Copper)
  * 80003ES2LAN Gigabit Ethernet Controller (Serdes)
diff --git a/drivers/net/ethernet/intel/e1000e/80003es2lan.h b/drivers/net/ethernet/intel/e1000e/80003es2lan.h
index 90d363b2d280..535a9430976d 100644
--- a/drivers/net/ethernet/intel/e1000e/80003es2lan.h
+++ b/drivers/net/ethernet/intel/e1000e/80003es2lan.h
@@ -1,30 +1,23 @@
-/*******************************************************************************
-
-  Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2013 Intel Corporation.
-
-  This program is free software; you can redistribute it and/or modify it
-  under the terms and conditions of the GNU General Public License,
-  version 2, as published by the Free Software Foundation.
-
-  This program is distributed in the hope it will be useful, but WITHOUT
-  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
-  more details.
-
-  You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc.,
-  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
-  The full GNU General Public License is included in this distribution in
-  the file called "COPYING".
-
-  Contact Information:
-  Linux NICS <linux.nics@intel.com>
-  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+/* Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
 
 #ifndef _E1000E_80003ES2LAN_H_
 #define _E1000E_80003ES2LAN_H_
diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c
index 8fed74e3fa53..e0aa7f1efb08 100644
--- a/drivers/net/ethernet/intel/e1000e/82571.c
+++ b/drivers/net/ethernet/intel/e1000e/82571.c
@@ -1,30 +1,23 @@
-/*******************************************************************************
-
-  Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2013 Intel Corporation.
-
-  This program is free software; you can redistribute it and/or modify it
-  under the terms and conditions of the GNU General Public License,
-  version 2, as published by the Free Software Foundation.
-
-  This program is distributed in the hope it will be useful, but WITHOUT
-  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
-  more details.
-
-  You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc.,
-  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
-  The full GNU General Public License is included in this distribution in
-  the file called "COPYING".
-
-  Contact Information:
-  Linux NICS <linux.nics@intel.com>
-  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+/* Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
 
 /* 82571EB Gigabit Ethernet Controller
  * 82571EB Gigabit Ethernet Controller (Copper)
diff --git a/drivers/net/ethernet/intel/e1000e/82571.h b/drivers/net/ethernet/intel/e1000e/82571.h
index 08e24dc3dc0e..2e758f796d60 100644
--- a/drivers/net/ethernet/intel/e1000e/82571.h
+++ b/drivers/net/ethernet/intel/e1000e/82571.h
@@ -1,30 +1,23 @@
-/*******************************************************************************
-
-  Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2013 Intel Corporation.
-
-  This program is free software; you can redistribute it and/or modify it
-  under the terms and conditions of the GNU General Public License,
-  version 2, as published by the Free Software Foundation.
-
-  This program is distributed in the hope it will be useful, but WITHOUT
-  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
-  more details.
-
-  You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc.,
-  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
-  The full GNU General Public License is included in this distribution in
-  the file called "COPYING".
-
-  Contact Information:
-  Linux NICS <linux.nics@intel.com>
-  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+/* Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
 
 #ifndef _E1000E_82571_H_
 #define _E1000E_82571_H_
diff --git a/drivers/net/ethernet/intel/e1000e/Makefile b/drivers/net/ethernet/intel/e1000e/Makefile
index c2dcfcc10857..106de493373c 100644
--- a/drivers/net/ethernet/intel/e1000e/Makefile
+++ b/drivers/net/ethernet/intel/e1000e/Makefile
@@ -1,7 +1,7 @@
 ################################################################################
 #
 # Intel PRO/1000 Linux driver
-# Copyright(c) 1999 - 2013 Intel Corporation.
+# Copyright(c) 1999 - 2014 Intel Corporation.
 #
 # This program is free software; you can redistribute it and/or modify it
 # under the terms and conditions of the GNU General Public License,
@@ -12,9 +12,8 @@
 # FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 # more details.
 #
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, see <http://www.gnu.org/licenses/>.
 #
 # The full GNU General Public License is included in this distribution in
 # the file called "COPYING".
diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h
index 351c94a0cf74..1b7c26857881 100644
--- a/drivers/net/ethernet/intel/e1000e/defines.h
+++ b/drivers/net/ethernet/intel/e1000e/defines.h
@@ -1,30 +1,23 @@
-/*******************************************************************************
-
-  Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2013 Intel Corporation.
-
-  This program is free software; you can redistribute it and/or modify it
-  under the terms and conditions of the GNU General Public License,
-  version 2, as published by the Free Software Foundation.
-
-  This program is distributed in the hope it will be useful, but WITHOUT
-  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
-  more details.
-
-  You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc.,
-  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
-  The full GNU General Public License is included in this distribution in
-  the file called "COPYING".
-
-  Contact Information:
-  Linux NICS <linux.nics@intel.com>
-  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+/* Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
 
 #ifndef _E1000_DEFINES_H_
 #define _E1000_DEFINES_H_
diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h
index 0150f7fc893d..4b8e88fd1616 100644
--- a/drivers/net/ethernet/intel/e1000e/e1000.h
+++ b/drivers/net/ethernet/intel/e1000e/e1000.h
@@ -1,30 +1,23 @@
-/*******************************************************************************
-
-  Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2013 Intel Corporation.
-
-  This program is free software; you can redistribute it and/or modify it
-  under the terms and conditions of the GNU General Public License,
-  version 2, as published by the Free Software Foundation.
-
-  This program is distributed in the hope it will be useful, but WITHOUT
-  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
-  more details.
-
-  You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc.,
-  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
-  The full GNU General Public License is included in this distribution in
-  the file called "COPYING".
-
-  Contact Information:
-  Linux NICS <linux.nics@intel.com>
-  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+/* Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
 
 /* Linux PRO/1000 Ethernet Driver main header file */
 
diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c
index d14c8f53384c..0a075f7eca74 100644
--- a/drivers/net/ethernet/intel/e1000e/ethtool.c
+++ b/drivers/net/ethernet/intel/e1000e/ethtool.c
@@ -1,30 +1,23 @@
-/*******************************************************************************
-
-  Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2013 Intel Corporation.
-
-  This program is free software; you can redistribute it and/or modify it
-  under the terms and conditions of the GNU General Public License,
-  version 2, as published by the Free Software Foundation.
-
-  This program is distributed in the hope it will be useful, but WITHOUT
-  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
-  more details.
-
-  You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc.,
-  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
-  The full GNU General Public License is included in this distribution in
-  the file called "COPYING".
-
-  Contact Information:
-  Linux NICS <linux.nics@intel.com>
-  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+/* Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
 
 /* ethtool support for e1000 */
 
diff --git a/drivers/net/ethernet/intel/e1000e/hw.h b/drivers/net/ethernet/intel/e1000e/hw.h
index b7f38435d1fd..016028350150 100644
--- a/drivers/net/ethernet/intel/e1000e/hw.h
+++ b/drivers/net/ethernet/intel/e1000e/hw.h
@@ -1,30 +1,23 @@
-/*******************************************************************************
-
-  Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2013 Intel Corporation.
-
-  This program is free software; you can redistribute it and/or modify it
-  under the terms and conditions of the GNU General Public License,
-  version 2, as published by the Free Software Foundation.
-
-  This program is distributed in the hope it will be useful, but WITHOUT
-  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
-  more details.
-
-  You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc.,
-  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
-  The full GNU General Public License is included in this distribution in
-  the file called "COPYING".
-
-  Contact Information:
-  Linux NICS <linux.nics@intel.com>
-  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+/* Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
 
 #ifndef _E1000_HW_H_
 #define _E1000_HW_H_
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 42cc537a8657..83184cf39499 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -1,30 +1,23 @@
-/*******************************************************************************
-
-  Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2013 Intel Corporation.
-
-  This program is free software; you can redistribute it and/or modify it
-  under the terms and conditions of the GNU General Public License,
-  version 2, as published by the Free Software Foundation.
-
-  This program is distributed in the hope it will be useful, but WITHOUT
-  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
-  more details.
-
-  You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc.,
-  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
-  The full GNU General Public License is included in this distribution in
-  the file called "COPYING".
-
-  Contact Information:
-  Linux NICS <linux.nics@intel.com>
-  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+/* Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
 
 /* 82562G 10/100 Network Connection
  * 82562G-2 10/100 Network Connection
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.h b/drivers/net/ethernet/intel/e1000e/ich8lan.h
index 707bf4dace49..51e0b157a731 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.h
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.h
@@ -1,30 +1,23 @@
-/*******************************************************************************
-
-  Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2013 Intel Corporation.
-
-  This program is free software; you can redistribute it and/or modify it
-  under the terms and conditions of the GNU General Public License,
-  version 2, as published by the Free Software Foundation.
-
-  This program is distributed in the hope it will be useful, but WITHOUT
-  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
-  more details.
-
-  You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc.,
-  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
-  The full GNU General Public License is included in this distribution in
-  the file called "COPYING".
-
-  Contact Information:
-  Linux NICS <linux.nics@intel.com>
-  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+/* Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
 
 #ifndef _E1000E_ICH8LAN_H_
 #define _E1000E_ICH8LAN_H_
diff --git a/drivers/net/ethernet/intel/e1000e/mac.c b/drivers/net/ethernet/intel/e1000e/mac.c
index 2480c1091873..baa0a466d1d0 100644
--- a/drivers/net/ethernet/intel/e1000e/mac.c
+++ b/drivers/net/ethernet/intel/e1000e/mac.c
@@ -1,30 +1,23 @@
-/*******************************************************************************
-
-  Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2013 Intel Corporation.
-
-  This program is free software; you can redistribute it and/or modify it
-  under the terms and conditions of the GNU General Public License,
-  version 2, as published by the Free Software Foundation.
-
-  This program is distributed in the hope it will be useful, but WITHOUT
-  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
-  more details.
-
-  You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc.,
-  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
-  The full GNU General Public License is included in this distribution in
-  the file called "COPYING".
-
-  Contact Information:
-  Linux NICS <linux.nics@intel.com>
-  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+/* Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
 
 #include "e1000.h"
 
diff --git a/drivers/net/ethernet/intel/e1000e/mac.h b/drivers/net/ethernet/intel/e1000e/mac.h
index a61fee404ebe..4e81c2825b7a 100644
--- a/drivers/net/ethernet/intel/e1000e/mac.h
+++ b/drivers/net/ethernet/intel/e1000e/mac.h
@@ -1,30 +1,23 @@
-/*******************************************************************************
-
-  Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2013 Intel Corporation.
-
-  This program is free software; you can redistribute it and/or modify it
-  under the terms and conditions of the GNU General Public License,
-  version 2, as published by the Free Software Foundation.
-
-  This program is distributed in the hope it will be useful, but WITHOUT
-  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
-  more details.
-
-  You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc.,
-  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
-  The full GNU General Public License is included in this distribution in
-  the file called "COPYING".
-
-  Contact Information:
-  Linux NICS <linux.nics@intel.com>
-  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+/* Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
 
 #ifndef _E1000E_MAC_H_
 #define _E1000E_MAC_H_
diff --git a/drivers/net/ethernet/intel/e1000e/manage.c b/drivers/net/ethernet/intel/e1000e/manage.c
index e4b0f1ef92f6..cb37ff1f1321 100644
--- a/drivers/net/ethernet/intel/e1000e/manage.c
+++ b/drivers/net/ethernet/intel/e1000e/manage.c
@@ -1,30 +1,23 @@
-/*******************************************************************************
-
-  Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2013 Intel Corporation.
-
-  This program is free software; you can redistribute it and/or modify it
-  under the terms and conditions of the GNU General Public License,
-  version 2, as published by the Free Software Foundation.
-
-  This program is distributed in the hope it will be useful, but WITHOUT
-  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
-  more details.
-
-  You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc.,
-  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
-  The full GNU General Public License is included in this distribution in
-  the file called "COPYING".
-
-  Contact Information:
-  Linux NICS <linux.nics@intel.com>
-  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+/* Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
 
 #include "e1000.h"
 
diff --git a/drivers/net/ethernet/intel/e1000e/manage.h b/drivers/net/ethernet/intel/e1000e/manage.h
index 326897c29ea8..a8c27f98f7b0 100644
--- a/drivers/net/ethernet/intel/e1000e/manage.h
+++ b/drivers/net/ethernet/intel/e1000e/manage.h
@@ -1,30 +1,23 @@
-/*******************************************************************************
-
-  Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2013 Intel Corporation.
-
-  This program is free software; you can redistribute it and/or modify it
-  under the terms and conditions of the GNU General Public License,
-  version 2, as published by the Free Software Foundation.
-
-  This program is distributed in the hope it will be useful, but WITHOUT
-  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
-  more details.
-
-  You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc.,
-  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
-  The full GNU General Public License is included in this distribution in
-  the file called "COPYING".
-
-  Contact Information:
-  Linux NICS <linux.nics@intel.com>
-  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+/* Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
 
 #ifndef _E1000E_MANAGE_H_
 #define _E1000E_MANAGE_H_
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 94bd92da29fa..a69388cba175 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -1,30 +1,23 @@
-/*******************************************************************************
-
-  Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2013 Intel Corporation.
-
-  This program is free software; you can redistribute it and/or modify it
-  under the terms and conditions of the GNU General Public License,
-  version 2, as published by the Free Software Foundation.
-
-  This program is distributed in the hope it will be useful, but WITHOUT
-  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
-  more details.
-
-  You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc.,
-  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
-  The full GNU General Public License is included in this distribution in
-  the file called "COPYING".
-
-  Contact Information:
-  Linux NICS <linux.nics@intel.com>
-  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+/* Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
@@ -7063,7 +7056,7 @@ static int __init e1000_init_module(void)
 	int ret;
 	pr_info("Intel(R) PRO/1000 Network Driver - %s\n",
 		e1000e_driver_version);
-	pr_info("Copyright(c) 1999 - 2013 Intel Corporation.\n");
+	pr_info("Copyright(c) 1999 - 2014 Intel Corporation.\n");
 	ret = pci_register_driver(&e1000_driver);
 
 	return ret;
diff --git a/drivers/net/ethernet/intel/e1000e/nvm.c b/drivers/net/ethernet/intel/e1000e/nvm.c
index d70a03906ac0..a9a976f04bff 100644
--- a/drivers/net/ethernet/intel/e1000e/nvm.c
+++ b/drivers/net/ethernet/intel/e1000e/nvm.c
@@ -1,30 +1,23 @@
-/*******************************************************************************
-
-  Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2013 Intel Corporation.
-
-  This program is free software; you can redistribute it and/or modify it
-  under the terms and conditions of the GNU General Public License,
-  version 2, as published by the Free Software Foundation.
-
-  This program is distributed in the hope it will be useful, but WITHOUT
-  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
-  more details.
-
-  You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc.,
-  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
-  The full GNU General Public License is included in this distribution in
-  the file called "COPYING".
-
-  Contact Information:
-  Linux NICS <linux.nics@intel.com>
-  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+/* Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
 
 #include "e1000.h"
 
diff --git a/drivers/net/ethernet/intel/e1000e/nvm.h b/drivers/net/ethernet/intel/e1000e/nvm.h
index 45fc69561627..342bf69efab5 100644
--- a/drivers/net/ethernet/intel/e1000e/nvm.h
+++ b/drivers/net/ethernet/intel/e1000e/nvm.h
@@ -1,30 +1,23 @@
-/*******************************************************************************
-
-  Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2013 Intel Corporation.
-
-  This program is free software; you can redistribute it and/or modify it
-  under the terms and conditions of the GNU General Public License,
-  version 2, as published by the Free Software Foundation.
-
-  This program is distributed in the hope it will be useful, but WITHOUT
-  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
-  more details.
-
-  You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc.,
-  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
-  The full GNU General Public License is included in this distribution in
-  the file called "COPYING".
-
-  Contact Information:
-  Linux NICS <linux.nics@intel.com>
-  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+/* Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
 
 #ifndef _E1000E_NVM_H_
 #define _E1000E_NVM_H_
diff --git a/drivers/net/ethernet/intel/e1000e/param.c b/drivers/net/ethernet/intel/e1000e/param.c
index c16bd75b6caa..01797b73e20c 100644
--- a/drivers/net/ethernet/intel/e1000e/param.c
+++ b/drivers/net/ethernet/intel/e1000e/param.c
@@ -1,30 +1,23 @@
-/*******************************************************************************
-
-  Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2013 Intel Corporation.
-
-  This program is free software; you can redistribute it and/or modify it
-  under the terms and conditions of the GNU General Public License,
-  version 2, as published by the Free Software Foundation.
-
-  This program is distributed in the hope it will be useful, but WITHOUT
-  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
-  more details.
-
-  You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc.,
-  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
-  The full GNU General Public License is included in this distribution in
-  the file called "COPYING".
-
-  Contact Information:
-  Linux NICS <linux.nics@intel.com>
-  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+/* Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
 
 #include <linux/netdevice.h>
 #include <linux/module.h>
diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c
index 20e71f4ca426..00b3fc98bf30 100644
--- a/drivers/net/ethernet/intel/e1000e/phy.c
+++ b/drivers/net/ethernet/intel/e1000e/phy.c
@@ -1,30 +1,23 @@
-/*******************************************************************************
-
-  Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2013 Intel Corporation.
-
-  This program is free software; you can redistribute it and/or modify it
-  under the terms and conditions of the GNU General Public License,
-  version 2, as published by the Free Software Foundation.
-
-  This program is distributed in the hope it will be useful, but WITHOUT
-  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
-  more details.
-
-  You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc.,
-  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
-  The full GNU General Public License is included in this distribution in
-  the file called "COPYING".
-
-  Contact Information:
-  Linux NICS <linux.nics@intel.com>
-  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+/* Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
 
 #include "e1000.h"
 
diff --git a/drivers/net/ethernet/intel/e1000e/phy.h b/drivers/net/ethernet/intel/e1000e/phy.h
index f4f71b9991e3..3841bccf058c 100644
--- a/drivers/net/ethernet/intel/e1000e/phy.h
+++ b/drivers/net/ethernet/intel/e1000e/phy.h
@@ -1,30 +1,23 @@
-/*******************************************************************************
-
-  Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2013 Intel Corporation.
-
-  This program is free software; you can redistribute it and/or modify it
-  under the terms and conditions of the GNU General Public License,
-  version 2, as published by the Free Software Foundation.
-
-  This program is distributed in the hope it will be useful, but WITHOUT
-  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
-  more details.
-
-  You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc.,
-  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
-  The full GNU General Public License is included in this distribution in
-  the file called "COPYING".
-
-  Contact Information:
-  Linux NICS <linux.nics@intel.com>
-  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+/* Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
 
 #ifndef _E1000E_PHY_H_
 #define _E1000E_PHY_H_
diff --git a/drivers/net/ethernet/intel/e1000e/ptp.c b/drivers/net/ethernet/intel/e1000e/ptp.c
index e24160de4926..3bd79a3ff829 100644
--- a/drivers/net/ethernet/intel/e1000e/ptp.c
+++ b/drivers/net/ethernet/intel/e1000e/ptp.c
@@ -1,30 +1,23 @@
-/*******************************************************************************
-
-  Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2013 Intel Corporation.
-
-  This program is free software; you can redistribute it and/or modify it
-  under the terms and conditions of the GNU General Public License,
-  version 2, as published by the Free Software Foundation.
-
-  This program is distributed in the hope it will be useful, but WITHOUT
-  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
-  more details.
-
-  You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc.,
-  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
-  The full GNU General Public License is included in this distribution in
-  the file called "COPYING".
-
-  Contact Information:
-  Linux NICS <linux.nics@intel.com>
-  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+/* Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
 
 /* PTP 1588 Hardware Clock (PHC)
  * Derived from PTP Hardware Clock driver for Intel 82576 and 82580 (igb)
diff --git a/drivers/net/ethernet/intel/e1000e/regs.h b/drivers/net/ethernet/intel/e1000e/regs.h
index a7e6a3e37257..5c55ef348fc2 100644
--- a/drivers/net/ethernet/intel/e1000e/regs.h
+++ b/drivers/net/ethernet/intel/e1000e/regs.h
@@ -1,30 +1,23 @@
-/*******************************************************************************
-
-  Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2013 Intel Corporation.
-
-  This program is free software; you can redistribute it and/or modify it
-  under the terms and conditions of the GNU General Public License,
-  version 2, as published by the Free Software Foundation.
-
-  This program is distributed in the hope it will be useful, but WITHOUT
-  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
-  more details.
-
-  You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc.,
-  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
-  The full GNU General Public License is included in this distribution in
-  the file called "COPYING".
-
-  Contact Information:
-  Linux NICS <linux.nics@intel.com>
-  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+/* Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
 
 #ifndef _E1000E_REGS_H_
 #define _E1000E_REGS_H_
-- 
cgit v1.2.2


From 3b70d4f8486ecbd6a7d931901309b49b07435774 Mon Sep 17 00:00:00 2001
From: David Ertman <davidx.m.ertman@intel.com>
Date: Wed, 5 Feb 2014 01:09:54 +0000
Subject: e1000e: Add missing branding strings in ich8lan.c

Branding strings from recently released and soon to be released
hardware configurations that are supported by e1000e.

Signed-off-by: Dave Ertman <davidx.m.ertman@intel.com>
Acked-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/e1000e/ich8lan.c | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 83184cf39499..723410a60297 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -46,6 +46,14 @@
  * 82578DC Gigabit Network Connection
  * 82579LM Gigabit Network Connection
  * 82579V Gigabit Network Connection
+ * Ethernet Connection I217-LM
+ * Ethernet Connection I217-V
+ * Ethernet Connection I218-V
+ * Ethernet Connection I218-LM
+ * Ethernet Connection (2) I218-LM
+ * Ethernet Connection (2) I218-V
+ * Ethernet Connection (3) I218-LM
+ * Ethernet Connection (3) I218-V
  */
 
 #include "e1000.h"
-- 
cgit v1.2.2


From 2800209994f878b00724ceabb65d744855c8f99a Mon Sep 17 00:00:00 2001
From: David Ertman <davidx.m.ertman@intel.com>
Date: Fri, 14 Feb 2014 07:16:41 +0000
Subject: e1000e: Refactor PM flows

Refactor the system power management flows to prevent the suspend path from
being executed twice when hibernating since both the freeze and
poweroff callbacks were set to e1000_suspend() via SET_SYSTEM_SLEEP_PM_OPS.
There are HW workarounds that are performed during this flow and calling
them twice was causing erroneous behavior.

Re-arrange the code to take advantage of common code paths and explicitly
set the individual dev_pm_ops callbacks for suspend, resume, freeze,
thaw, poweroff and restore.

Add a boolean parameter (reset) to the e1000e_down function to allow
for cases when the HW should not be reset when downed during a PM event.

Now that all suspend/shutdown paths result in a call to __e1000_shutdown()
that checks Wake on Lan status, removing redundant check for WoL in
e1000_power_down_phy().

Signed-off-by: Dave Ertman <davidx.m.ertman@intel.com>
Acked-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/e1000e/e1000.h   |   2 +-
 drivers/net/ethernet/intel/e1000e/ethtool.c |   6 +-
 drivers/net/ethernet/intel/e1000e/netdev.c  | 125 ++++++++++++++++------------
 3 files changed, 78 insertions(+), 55 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h
index 4b8e88fd1616..129a9c3a5b69 100644
--- a/drivers/net/ethernet/intel/e1000e/e1000.h
+++ b/drivers/net/ethernet/intel/e1000e/e1000.h
@@ -469,7 +469,7 @@ void e1000e_check_options(struct e1000_adapter *adapter);
 void e1000e_set_ethtool_ops(struct net_device *netdev);
 
 int e1000e_up(struct e1000_adapter *adapter);
-void e1000e_down(struct e1000_adapter *adapter);
+void e1000e_down(struct e1000_adapter *adapter, bool reset);
 void e1000e_reinit_locked(struct e1000_adapter *adapter);
 void e1000e_reset(struct e1000_adapter *adapter);
 void e1000e_power_up_phy(struct e1000_adapter *adapter);
diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c
index 0a075f7eca74..7a479022a8c6 100644
--- a/drivers/net/ethernet/intel/e1000e/ethtool.c
+++ b/drivers/net/ethernet/intel/e1000e/ethtool.c
@@ -325,7 +325,7 @@ static int e1000_set_settings(struct net_device *netdev,
 
 	/* reset the link */
 	if (netif_running(adapter->netdev)) {
-		e1000e_down(adapter);
+		e1000e_down(adapter, true);
 		e1000e_up(adapter);
 	} else {
 		e1000e_reset(adapter);
@@ -373,7 +373,7 @@ static int e1000_set_pauseparam(struct net_device *netdev,
 	if (adapter->fc_autoneg == AUTONEG_ENABLE) {
 		hw->fc.requested_mode = e1000_fc_default;
 		if (netif_running(adapter->netdev)) {
-			e1000e_down(adapter);
+			e1000e_down(adapter, true);
 			e1000e_up(adapter);
 		} else {
 			e1000e_reset(adapter);
@@ -719,7 +719,7 @@ static int e1000_set_ringparam(struct net_device *netdev,
 
 	pm_runtime_get_sync(netdev->dev.parent);
 
-	e1000e_down(adapter);
+	e1000e_down(adapter, true);
 
 	/* We can't just free everything and then setup again, because the
 	 * ISRs in MSI-X mode get passed pointers to the Tx and Rx ring
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index a69388cba175..2669fdc09c8e 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -3687,10 +3687,6 @@ void e1000e_power_up_phy(struct e1000_adapter *adapter)
  */
 static void e1000_power_down_phy(struct e1000_adapter *adapter)
 {
-	/* WoL is enabled */
-	if (adapter->wol)
-		return;
-
 	if (adapter->hw.phy.ops.power_down)
 		adapter->hw.phy.ops.power_down(&adapter->hw);
 }
@@ -3907,10 +3903,8 @@ void e1000e_reset(struct e1000_adapter *adapter)
 	}
 
 	if (!netif_running(adapter->netdev) &&
-	    !test_bit(__E1000_TESTING, &adapter->state)) {
+	    !test_bit(__E1000_TESTING, &adapter->state))
 		e1000_power_down_phy(adapter);
-		return;
-	}
 
 	e1000_get_phy_info(hw);
 
@@ -3977,7 +3971,12 @@ static void e1000e_flush_descriptors(struct e1000_adapter *adapter)
 
 static void e1000e_update_stats(struct e1000_adapter *adapter);
 
-void e1000e_down(struct e1000_adapter *adapter)
+/**
+ * e1000e_down - quiesce the device and optionally reset the hardware
+ * @adapter: board private structure
+ * @reset: boolean flag to reset the hardware or not
+ */
+void e1000e_down(struct e1000_adapter *adapter, bool reset)
 {
 	struct net_device *netdev = adapter->netdev;
 	struct e1000_hw *hw = &adapter->hw;
@@ -4031,12 +4030,8 @@ void e1000e_down(struct e1000_adapter *adapter)
 	    e1000_lv_jumbo_workaround_ich8lan(hw, false))
 		e_dbg("failed to disable jumbo frame workaround mode\n");
 
-	if (!pci_channel_offline(adapter->pdev))
+	if (reset && !pci_channel_offline(adapter->pdev))
 		e1000e_reset(adapter);
-
-	/* TODO: for power management, we could drop the link and
-	 * pci_disable_device here.
-	 */
 }
 
 void e1000e_reinit_locked(struct e1000_adapter *adapter)
@@ -4044,7 +4039,7 @@ void e1000e_reinit_locked(struct e1000_adapter *adapter)
 	might_sleep();
 	while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
 		usleep_range(1000, 2000);
-	e1000e_down(adapter);
+	e1000e_down(adapter, true);
 	e1000e_up(adapter);
 	clear_bit(__E1000_RESETTING, &adapter->state);
 }
@@ -4372,14 +4367,12 @@ static int e1000_close(struct net_device *netdev)
 	pm_runtime_get_sync(&pdev->dev);
 
 	if (!test_bit(__E1000_DOWN, &adapter->state)) {
-		e1000e_down(adapter);
+		e1000e_down(adapter, true);
 		e1000_free_irq(adapter);
 	}
 
 	napi_disable(&adapter->napi);
 
-	e1000_power_down_phy(adapter);
-
 	e1000e_free_tx_resources(adapter->tx_ring);
 	e1000e_free_rx_resources(adapter->rx_ring);
 
@@ -5686,7 +5679,7 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
 	e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu);
 	netdev->mtu = new_mtu;
 	if (netif_running(netdev))
-		e1000e_down(adapter);
+		e1000e_down(adapter, true);
 
 	/* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
 	 * means we reserve 2 more, this pushes us to allocate from the next
@@ -5919,15 +5912,10 @@ release:
 	return retval;
 }
 
-static int __e1000_shutdown(struct pci_dev *pdev, bool runtime)
+static int e1000e_pm_freeze(struct device *dev)
 {
-	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct net_device *netdev = pci_get_drvdata(to_pci_dev(dev));
 	struct e1000_adapter *adapter = netdev_priv(netdev);
-	struct e1000_hw *hw = &adapter->hw;
-	u32 ctrl, ctrl_ext, rctl, status;
-	/* Runtime suspend should only enable wakeup for link changes */
-	u32 wufc = runtime ? E1000_WUFC_LNKC : adapter->wol;
-	int retval = 0;
 
 	netif_device_detach(netdev);
 
@@ -5938,11 +5926,29 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime)
 			usleep_range(10000, 20000);
 
 		WARN_ON(test_bit(__E1000_RESETTING, &adapter->state));
-		e1000e_down(adapter);
+
+		/* Quiesce the device without resetting the hardware */
+		e1000e_down(adapter, false);
 		e1000_free_irq(adapter);
 	}
 	e1000e_reset_interrupt_capability(adapter);
 
+	/* Allow time for pending master requests to run */
+	e1000e_disable_pcie_master(&adapter->hw);
+
+	return 0;
+}
+
+static int __e1000_shutdown(struct pci_dev *pdev, bool runtime)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	u32 ctrl, ctrl_ext, rctl, status;
+	/* Runtime suspend should only enable wakeup for link changes */
+	u32 wufc = runtime ? E1000_WUFC_LNKC : adapter->wol;
+	int retval = 0;
+
 	status = er32(STATUS);
 	if (status & E1000_STATUS_LU)
 		wufc &= ~E1000_WUFC_LNKC;
@@ -5976,9 +5982,6 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime)
 		if (adapter->flags & FLAG_IS_ICH)
 			e1000_suspend_workarounds_ich8lan(&adapter->hw);
 
-		/* Allow time for pending master requests to run */
-		e1000e_disable_pcie_master(&adapter->hw);
-
 		if (adapter->flags2 & FLAG2_HAS_PHY_WAKEUP) {
 			/* enable wakeup by the PHY */
 			retval = e1000_init_phy_wakeup(adapter, wufc);
@@ -5992,6 +5995,8 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime)
 	} else {
 		ew32(WUC, 0);
 		ew32(WUFC, 0);
+
+		e1000_power_down_phy(adapter);
 	}
 
 	if (adapter->hw.phy.type == e1000_phy_igp_3)
@@ -6114,7 +6119,6 @@ static int __e1000_resume(struct pci_dev *pdev)
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
 	u16 aspm_disable_flag = 0;
-	u32 err;
 
 	if (adapter->flags2 & FLAG2_DISABLE_ASPM_L0S)
 		aspm_disable_flag = PCIE_LINK_STATE_L0S;
@@ -6125,13 +6129,6 @@ static int __e1000_resume(struct pci_dev *pdev)
 
 	pci_set_master(pdev);
 
-	e1000e_set_interrupt_capability(adapter);
-	if (netif_running(netdev)) {
-		err = e1000_request_irq(adapter);
-		if (err)
-			return err;
-	}
-
 	if (hw->mac.type >= e1000_pch2lan)
 		e1000_resume_workarounds_pchlan(&adapter->hw);
 
@@ -6185,24 +6182,46 @@ static int __e1000_resume(struct pci_dev *pdev)
 	return 0;
 }
 
+static int e1000e_pm_thaw(struct device *dev)
+{
+	struct net_device *netdev = pci_get_drvdata(to_pci_dev(dev));
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+
+	e1000e_set_interrupt_capability(adapter);
+	if (netif_running(netdev)) {
+		u32 err = e1000_request_irq(adapter);
+
+		if (err)
+			return err;
+
+		e1000e_up(adapter);
+	}
+
+	netif_device_attach(netdev);
+
+	return 0;
+}
+
 #ifdef CONFIG_PM_SLEEP
-static int e1000_suspend(struct device *dev)
+static int e1000e_pm_suspend(struct device *dev)
 {
 	struct pci_dev *pdev = to_pci_dev(dev);
 
+	e1000e_pm_freeze(dev);
+
 	return __e1000_shutdown(pdev, false);
 }
 
-static int e1000_resume(struct device *dev)
+static int e1000e_pm_resume(struct device *dev)
 {
 	struct pci_dev *pdev = to_pci_dev(dev);
-	struct net_device *netdev = pci_get_drvdata(pdev);
-	struct e1000_adapter *adapter = netdev_priv(netdev);
+	int rc;
 
-	if (e1000e_pm_ready(adapter))
-		adapter->idle_check = true;
+	rc = __e1000_resume(pdev);
+	if (rc)
+		return rc;
 
-	return __e1000_resume(pdev);
+	return e1000e_pm_thaw(dev);
 }
 #endif /* CONFIG_PM_SLEEP */
 
@@ -6254,6 +6273,8 @@ static int e1000_runtime_resume(struct device *dev)
 
 static void e1000_shutdown(struct pci_dev *pdev)
 {
+	e1000e_pm_freeze(&pdev->dev);
+
 	__e1000_shutdown(pdev, false);
 }
 
@@ -6339,7 +6360,7 @@ static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
 		return PCI_ERS_RESULT_DISCONNECT;
 
 	if (netif_running(netdev))
-		e1000e_down(adapter);
+		e1000e_down(adapter, true);
 	pci_disable_device(pdev);
 
 	/* Request a slot slot reset. */
@@ -6351,7 +6372,7 @@ static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
  * @pdev: Pointer to PCI device
  *
  * Restart the card from scratch, as if from a cold-boot. Implementation
- * resembles the first-half of the e1000_resume routine.
+ * resembles the first-half of the e1000e_pm_resume routine.
  */
 static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
 {
@@ -6398,7 +6419,7 @@ static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
  *
  * This callback is called when the error recovery driver tells us that
  * its OK to resume normal operation. Implementation resembles the
- * second-half of the e1000_resume routine.
+ * second-half of the e1000e_pm_resume routine.
  */
 static void e1000_io_resume(struct pci_dev *pdev)
 {
@@ -6903,9 +6924,6 @@ static void e1000_remove(struct pci_dev *pdev)
 		}
 	}
 
-	if (!(netdev->flags & IFF_UP))
-		e1000_power_down_phy(adapter);
-
 	/* Don't lie to e1000_close() down the road. */
 	if (!down)
 		clear_bit(__E1000_DOWN, &adapter->state);
@@ -7027,7 +7045,12 @@ static DEFINE_PCI_DEVICE_TABLE(e1000_pci_tbl) = {
 MODULE_DEVICE_TABLE(pci, e1000_pci_tbl);
 
 static const struct dev_pm_ops e1000_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(e1000_suspend, e1000_resume)
+	.suspend	= e1000e_pm_suspend,
+	.resume		= e1000e_pm_resume,
+	.freeze		= e1000e_pm_freeze,
+	.thaw		= e1000e_pm_thaw,
+	.poweroff	= e1000e_pm_suspend,
+	.restore	= e1000e_pm_resume,
 	SET_RUNTIME_PM_OPS(e1000_runtime_suspend, e1000_runtime_resume,
 			   e1000_idle)
 };
-- 
cgit v1.2.2


From 63eb48f151b5f1d8dba35d6176d0d7c9643b33af Mon Sep 17 00:00:00 2001
From: David Ertman <davidx.m.ertman@intel.com>
Date: Fri, 14 Feb 2014 07:16:46 +0000
Subject: e1000e Refactor of Runtime Power Management

Fix issues with:
RuntimePM causing the device to repeatedly flip between suspend and resume
with the interface administratively downed.
Having RuntimePM enabled interfering with the functionality of Energy
Efficient Ethernet.

Added checks to disallow functions that should not be executed if the
device is currently runtime suspended

Make runtime_idle callback to use same deterministic behavior as the igb
driver.

Signed-off-by: Dave Ertman <davidx.m.ertman@intel.com>
Acked-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/e1000e/e1000.h  |  1 -
 drivers/net/ethernet/intel/e1000e/netdev.c | 77 ++++++++++++++++++------------
 2 files changed, 46 insertions(+), 32 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h
index 129a9c3a5b69..5325e3e2154e 100644
--- a/drivers/net/ethernet/intel/e1000e/e1000.h
+++ b/drivers/net/ethernet/intel/e1000e/e1000.h
@@ -326,7 +326,6 @@ struct e1000_adapter {
 	struct work_struct update_phy_task;
 	struct work_struct print_hang_task;
 
-	bool idle_check;
 	int phy_hang_count;
 
 	u16 tx_ring_count;
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 2669fdc09c8e..7fd1feaeb405 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -3327,6 +3327,9 @@ static void e1000e_set_rx_mode(struct net_device *netdev)
 	struct e1000_hw *hw = &adapter->hw;
 	u32 rctl;
 
+	if (pm_runtime_suspended(netdev->dev.parent))
+		return;
+
 	/* Check for Promiscuous and All Multicast modes */
 	rctl = er32(RCTL);
 
@@ -4317,7 +4320,6 @@ static int e1000_open(struct net_device *netdev)
 	adapter->tx_hang_recheck = false;
 	netif_start_queue(netdev);
 
-	adapter->idle_check = true;
 	hw->mac.get_link_status = true;
 	pm_runtime_put(&pdev->dev);
 
@@ -4369,6 +4371,9 @@ static int e1000_close(struct net_device *netdev)
 	if (!test_bit(__E1000_DOWN, &adapter->state)) {
 		e1000e_down(adapter, true);
 		e1000_free_irq(adapter);
+
+		/* Link status message must follow this format */
+		pr_info("%s NIC Link is Down\n", adapter->netdev->name);
 	}
 
 	napi_disable(&adapter->napi);
@@ -5678,6 +5683,9 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
 	adapter->max_frame_size = max_frame;
 	e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu);
 	netdev->mtu = new_mtu;
+
+	pm_runtime_get_sync(netdev->dev.parent);
+
 	if (netif_running(netdev))
 		e1000e_down(adapter, true);
 
@@ -5705,6 +5713,8 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
 	else
 		e1000e_reset(adapter);
 
+	pm_runtime_put_sync(netdev->dev.parent);
+
 	clear_bit(__E1000_RESETTING, &adapter->state);
 
 	return 0;
@@ -5979,6 +5989,9 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime)
 			ew32(CTRL_EXT, ctrl_ext);
 		}
 
+		if (!runtime)
+			e1000e_power_up_phy(adapter);
+
 		if (adapter->flags & FLAG_IS_ICH)
 			e1000_suspend_workarounds_ich8lan(&adapter->hw);
 
@@ -6108,11 +6121,6 @@ static void e1000e_disable_aspm(struct pci_dev *pdev, u16 state)
 }
 
 #ifdef CONFIG_PM
-static bool e1000e_pm_ready(struct e1000_adapter *adapter)
-{
-	return !!adapter->tx_ring->buffer_info;
-}
-
 static int __e1000_resume(struct pci_dev *pdev)
 {
 	struct net_device *netdev = pci_get_drvdata(pdev);
@@ -6167,11 +6175,6 @@ static int __e1000_resume(struct pci_dev *pdev)
 
 	e1000_init_manageability_pt(adapter);
 
-	if (netif_running(netdev))
-		e1000e_up(adapter);
-
-	netif_device_attach(netdev);
-
 	/* If the controller has AMT, do not set DRV_LOAD until the interface
 	 * is up.  For all other cases, let the f/w know that the h/w is now
 	 * under the control of the driver.
@@ -6226,47 +6229,59 @@ static int e1000e_pm_resume(struct device *dev)
 #endif /* CONFIG_PM_SLEEP */
 
 #ifdef CONFIG_PM_RUNTIME
-static int e1000_runtime_suspend(struct device *dev)
+static int e1000e_pm_runtime_idle(struct device *dev)
 {
 	struct pci_dev *pdev = to_pci_dev(dev);
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 
-	if (!e1000e_pm_ready(adapter))
-		return 0;
+	if (!e1000e_has_link(adapter))
+		pm_schedule_suspend(dev, 5 * MSEC_PER_SEC);
 
-	return __e1000_shutdown(pdev, true);
+	return -EBUSY;
 }
 
-static int e1000_idle(struct device *dev)
+static int e1000e_pm_runtime_resume(struct device *dev)
 {
 	struct pci_dev *pdev = to_pci_dev(dev);
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct e1000_adapter *adapter = netdev_priv(netdev);
+	int rc;
 
-	if (!e1000e_pm_ready(adapter))
-		return 0;
+	rc = __e1000_resume(pdev);
+	if (rc)
+		return rc;
 
-	if (adapter->idle_check) {
-		adapter->idle_check = false;
-		if (!e1000e_has_link(adapter))
-			pm_schedule_suspend(dev, MSEC_PER_SEC);
-	}
+	if (netdev->flags & IFF_UP)
+		rc = e1000e_up(adapter);
 
-	return -EBUSY;
+	return rc;
 }
 
-static int e1000_runtime_resume(struct device *dev)
+static int e1000e_pm_runtime_suspend(struct device *dev)
 {
 	struct pci_dev *pdev = to_pci_dev(dev);
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 
-	if (!e1000e_pm_ready(adapter))
-		return 0;
+	if (netdev->flags & IFF_UP) {
+		int count = E1000_CHECK_RESET_COUNT;
+
+		while (test_bit(__E1000_RESETTING, &adapter->state) && count--)
+			usleep_range(10000, 20000);
 
-	adapter->idle_check = !dev->power.runtime_auto;
-	return __e1000_resume(pdev);
+		WARN_ON(test_bit(__E1000_RESETTING, &adapter->state));
+
+		/* Down the device without resetting the hardware */
+		e1000e_down(adapter, false);
+	}
+
+	if (__e1000_shutdown(pdev, true)) {
+		e1000e_pm_runtime_resume(dev);
+		return -EBUSY;
+	}
+
+	return 0;
 }
 #endif /* CONFIG_PM_RUNTIME */
 #endif /* CONFIG_PM */
@@ -7051,8 +7066,8 @@ static const struct dev_pm_ops e1000_pm_ops = {
 	.thaw		= e1000e_pm_thaw,
 	.poweroff	= e1000e_pm_suspend,
 	.restore	= e1000e_pm_resume,
-	SET_RUNTIME_PM_OPS(e1000_runtime_suspend, e1000_runtime_resume,
-			   e1000_idle)
+	SET_RUNTIME_PM_OPS(e1000e_pm_runtime_suspend, e1000e_pm_runtime_resume,
+			   e1000e_pm_runtime_idle)
 };
 
 /* PCI Device API Driver */
-- 
cgit v1.2.2


From 74f350ee08e2ffa083204029018fce9941ba9bd5 Mon Sep 17 00:00:00 2001
From: David Ertman <davidx.m.ertman@intel.com>
Date: Sat, 22 Feb 2014 03:15:17 +0000
Subject: e1000e: Feature Enable PHY Ultra Low Power Mode (ULP)

ULP is a power saving feature that reduces the power consumption of the
PHY when a cable is not connected.

ULP is gated on the following conditions:
1) The hardware must support ULP.  Currently this is only I218
   devices from Intel
2) ULP is initiated by the driver, so, no driver results in no ULP.
3) ULP's implementation utilizes Runtime Power Management to toggle its
   execution.  ULP is enabled/disabled based on the state of Runtime PM.
4) ULP is not active when wake-on-unicast, multicast or broadcast is active
   as these features are mutually-exclusive.

Since the PHY is in an unavailable state while ULP is active, any access
of the PHY registers will fail.  This is resolved by utilizing kernel
calls that cause the device to exit Runtime PM (e.g. pm_runtime_get_sync)
and then, after PHY access is complete,  allow the device to resume
Runtime PM (e.g. pm_runtime_put_sync).

Under certain conditions, toggling the LANPHYPC is necessary to disable
ULP mode.  Break out existing code to toggle LANPHYPC to a new function
to avoid code duplication.

Signed-off-by: Dave Ertman <davidx.m.ertman@intel.com>
Cc: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/e1000e/defines.h |   8 +-
 drivers/net/ethernet/intel/e1000e/hw.h      |   8 +
 drivers/net/ethernet/intel/e1000e/ich8lan.c | 324 +++++++++++++++++++++++++---
 drivers/net/ethernet/intel/e1000e/ich8lan.h |  22 ++
 drivers/net/ethernet/intel/e1000e/netdev.c  |  24 ++-
 drivers/net/ethernet/intel/e1000e/regs.h    |   1 +
 6 files changed, 354 insertions(+), 33 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h
index 1b7c26857881..d18e89212575 100644
--- a/drivers/net/ethernet/intel/e1000e/defines.h
+++ b/drivers/net/ethernet/intel/e1000e/defines.h
@@ -28,9 +28,11 @@
 
 /* Definitions for power management and wakeup registers */
 /* Wake Up Control */
-#define E1000_WUC_APME       0x00000001 /* APM Enable */
-#define E1000_WUC_PME_EN     0x00000002 /* PME Enable */
-#define E1000_WUC_PHY_WAKE   0x00000100 /* if PHY supports wakeup */
+#define E1000_WUC_APME		0x00000001	/* APM Enable */
+#define E1000_WUC_PME_EN	0x00000002	/* PME Enable */
+#define E1000_WUC_PME_STATUS	0x00000004	/* PME Status */
+#define E1000_WUC_APMPME	0x00000008	/* Assert PME on APM Wakeup */
+#define E1000_WUC_PHY_WAKE	0x00000100	/* if PHY supports wakeup */
 
 /* Wake Up Filter Control */
 #define E1000_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */
diff --git a/drivers/net/ethernet/intel/e1000e/hw.h b/drivers/net/ethernet/intel/e1000e/hw.h
index 016028350150..6b3de5f39a97 100644
--- a/drivers/net/ethernet/intel/e1000e/hw.h
+++ b/drivers/net/ethernet/intel/e1000e/hw.h
@@ -648,12 +648,20 @@ struct e1000_shadow_ram {
 
 #define E1000_ICH8_SHADOW_RAM_WORDS		2048
 
+/* I218 PHY Ultra Low Power (ULP) states */
+enum e1000_ulp_state {
+	e1000_ulp_state_unknown,
+	e1000_ulp_state_off,
+	e1000_ulp_state_on,
+};
+
 struct e1000_dev_spec_ich8lan {
 	bool kmrn_lock_loss_workaround_enabled;
 	struct e1000_shadow_ram shadow_ram[E1000_ICH8_SHADOW_RAM_WORDS];
 	bool nvm_k1_enabled;
 	bool eee_disable;
 	u16 eee_lp_ability;
+	enum e1000_ulp_state ulp_state;
 };
 
 struct e1000_hw {
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 723410a60297..18984519a18d 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -143,7 +143,9 @@ static void e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index);
 static void e1000_rar_set_pch_lpt(struct e1000_hw *hw, u8 *addr, u32 index);
 static s32 e1000_k1_workaround_lv(struct e1000_hw *hw);
 static void e1000_gate_hw_phy_config_ich8lan(struct e1000_hw *hw, bool gate);
+static s32 e1000_disable_ulp_lpt_lp(struct e1000_hw *hw, bool force);
 static s32 e1000_setup_copper_link_pch_lpt(struct e1000_hw *hw);
+static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state);
 
 static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg)
 {
@@ -239,6 +241,47 @@ out:
 	return true;
 }
 
+/**
+ *  e1000_toggle_lanphypc_pch_lpt - toggle the LANPHYPC pin value
+ *  @hw: pointer to the HW structure
+ *
+ *  Toggling the LANPHYPC pin value fully power-cycles the PHY and is
+ *  used to reset the PHY to a quiescent state when necessary.
+ **/
+static void e1000_toggle_lanphypc_pch_lpt(struct e1000_hw *hw)
+{
+	u32 mac_reg;
+
+	/* Set Phy Config Counter to 50msec */
+	mac_reg = er32(FEXTNVM3);
+	mac_reg &= ~E1000_FEXTNVM3_PHY_CFG_COUNTER_MASK;
+	mac_reg |= E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC;
+	ew32(FEXTNVM3, mac_reg);
+
+	/* Toggle LANPHYPC Value bit */
+	mac_reg = er32(CTRL);
+	mac_reg |= E1000_CTRL_LANPHYPC_OVERRIDE;
+	mac_reg &= ~E1000_CTRL_LANPHYPC_VALUE;
+	ew32(CTRL, mac_reg);
+	e1e_flush();
+	usleep_range(10, 20);
+	mac_reg &= ~E1000_CTRL_LANPHYPC_OVERRIDE;
+	ew32(CTRL, mac_reg);
+	e1e_flush();
+
+	if (hw->mac.type < e1000_pch_lpt) {
+		msleep(50);
+	} else {
+		u16 count = 20;
+
+		do {
+			usleep_range(5000, 10000);
+		} while (!(er32(CTRL_EXT) & E1000_CTRL_EXT_LPCD) && count--);
+
+		msleep(30);
+	}
+}
+
 /**
  *  e1000_init_phy_workarounds_pchlan - PHY initialization workarounds
  *  @hw: pointer to the HW structure
@@ -257,6 +300,12 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw)
 	 */
 	e1000_gate_hw_phy_config_ich8lan(hw, true);
 
+	/* It is not possible to be certain of the current state of ULP
+	 * so forcibly disable it.
+	 */
+	hw->dev_spec.ich8lan.ulp_state = e1000_ulp_state_unknown;
+	e1000_disable_ulp_lpt_lp(hw, true);
+
 	ret_val = hw->phy.ops.acquire(hw);
 	if (ret_val) {
 		e_dbg("Failed to initialize PHY flow\n");
@@ -302,33 +351,9 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw)
 			break;
 		}
 
-		e_dbg("Toggling LANPHYPC\n");
-
-		/* Set Phy Config Counter to 50msec */
-		mac_reg = er32(FEXTNVM3);
-		mac_reg &= ~E1000_FEXTNVM3_PHY_CFG_COUNTER_MASK;
-		mac_reg |= E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC;
-		ew32(FEXTNVM3, mac_reg);
-
 		/* Toggle LANPHYPC Value bit */
-		mac_reg = er32(CTRL);
-		mac_reg |= E1000_CTRL_LANPHYPC_OVERRIDE;
-		mac_reg &= ~E1000_CTRL_LANPHYPC_VALUE;
-		ew32(CTRL, mac_reg);
-		e1e_flush();
-		usleep_range(10, 20);
-		mac_reg &= ~E1000_CTRL_LANPHYPC_OVERRIDE;
-		ew32(CTRL, mac_reg);
-		e1e_flush();
-		if (hw->mac.type < e1000_pch_lpt) {
-			msleep(50);
-		} else {
-			u16 count = 20;
-			do {
-				usleep_range(5000, 10000);
-			} while (!(er32(CTRL_EXT) &
-				   E1000_CTRL_EXT_LPCD) && count--);
-			usleep_range(30000, 60000);
+		e1000_toggle_lanphypc_pch_lpt(hw);
+		if (hw->mac.type >= e1000_pch_lpt) {
 			if (e1000_phy_is_accessible_pchlan(hw))
 				break;
 
@@ -1005,6 +1030,253 @@ static s32 e1000_platform_pm_pch_lpt(struct e1000_hw *hw, bool link)
 	return 0;
 }
 
+/**
+ *  e1000_enable_ulp_lpt_lp - configure Ultra Low Power mode for LynxPoint-LP
+ *  @hw: pointer to the HW structure
+ *  @to_sx: boolean indicating a system power state transition to Sx
+ *
+ *  When link is down, configure ULP mode to significantly reduce the power
+ *  to the PHY.  If on a Manageability Engine (ME) enabled system, tell the
+ *  ME firmware to start the ULP configuration.  If not on an ME enabled
+ *  system, configure the ULP mode by software.
+ */
+s32 e1000_enable_ulp_lpt_lp(struct e1000_hw *hw, bool to_sx)
+{
+	u32 mac_reg;
+	s32 ret_val = 0;
+	u16 phy_reg;
+
+	if ((hw->mac.type < e1000_pch_lpt) ||
+	    (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPT_I217_LM) ||
+	    (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPT_I217_V) ||
+	    (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_LM2) ||
+	    (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_V2) ||
+	    (hw->dev_spec.ich8lan.ulp_state == e1000_ulp_state_on))
+		return 0;
+
+	if (er32(FWSM) & E1000_ICH_FWSM_FW_VALID) {
+		/* Request ME configure ULP mode in the PHY */
+		mac_reg = er32(H2ME);
+		mac_reg |= E1000_H2ME_ULP | E1000_H2ME_ENFORCE_SETTINGS;
+		ew32(H2ME, mac_reg);
+
+		goto out;
+	}
+
+	if (!to_sx) {
+		int i = 0;
+
+		/* Poll up to 5 seconds for Cable Disconnected indication */
+		while (!(er32(FEXT) & E1000_FEXT_PHY_CABLE_DISCONNECTED)) {
+			/* Bail if link is re-acquired */
+			if (er32(STATUS) & E1000_STATUS_LU)
+				return -E1000_ERR_PHY;
+
+			if (i++ == 100)
+				break;
+
+			msleep(50);
+		}
+		e_dbg("CABLE_DISCONNECTED %s set after %dmsec\n",
+		      (er32(FEXT) &
+		       E1000_FEXT_PHY_CABLE_DISCONNECTED) ? "" : "not", i * 50);
+	}
+
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		goto out;
+
+	/* Force SMBus mode in PHY */
+	ret_val = e1000_read_phy_reg_hv_locked(hw, CV_SMB_CTRL, &phy_reg);
+	if (ret_val)
+		goto release;
+	phy_reg |= CV_SMB_CTRL_FORCE_SMBUS;
+	e1000_write_phy_reg_hv_locked(hw, CV_SMB_CTRL, phy_reg);
+
+	/* Force SMBus mode in MAC */
+	mac_reg = er32(CTRL_EXT);
+	mac_reg |= E1000_CTRL_EXT_FORCE_SMBUS;
+	ew32(CTRL_EXT, mac_reg);
+
+	/* Set Inband ULP Exit, Reset to SMBus mode and
+	 * Disable SMBus Release on PERST# in PHY
+	 */
+	ret_val = e1000_read_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, &phy_reg);
+	if (ret_val)
+		goto release;
+	phy_reg |= (I218_ULP_CONFIG1_RESET_TO_SMBUS |
+		    I218_ULP_CONFIG1_DISABLE_SMB_PERST);
+	if (to_sx) {
+		if (er32(WUFC) & E1000_WUFC_LNKC)
+			phy_reg |= I218_ULP_CONFIG1_WOL_HOST;
+
+		phy_reg |= I218_ULP_CONFIG1_STICKY_ULP;
+	} else {
+		phy_reg |= I218_ULP_CONFIG1_INBAND_EXIT;
+	}
+	e1000_write_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, phy_reg);
+
+	/* Set Disable SMBus Release on PERST# in MAC */
+	mac_reg = er32(FEXTNVM7);
+	mac_reg |= E1000_FEXTNVM7_DISABLE_SMB_PERST;
+	ew32(FEXTNVM7, mac_reg);
+
+	/* Commit ULP changes in PHY by starting auto ULP configuration */
+	phy_reg |= I218_ULP_CONFIG1_START;
+	e1000_write_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, phy_reg);
+release:
+	hw->phy.ops.release(hw);
+out:
+	if (ret_val)
+		e_dbg("Error in ULP enable flow: %d\n", ret_val);
+	else
+		hw->dev_spec.ich8lan.ulp_state = e1000_ulp_state_on;
+
+	return ret_val;
+}
+
+/**
+ *  e1000_disable_ulp_lpt_lp - unconfigure Ultra Low Power mode for LynxPoint-LP
+ *  @hw: pointer to the HW structure
+ *  @force: boolean indicating whether or not to force disabling ULP
+ *
+ *  Un-configure ULP mode when link is up, the system is transitioned from
+ *  Sx or the driver is unloaded.  If on a Manageability Engine (ME) enabled
+ *  system, poll for an indication from ME that ULP has been un-configured.
+ *  If not on an ME enabled system, un-configure the ULP mode by software.
+ *
+ *  During nominal operation, this function is called when link is acquired
+ *  to disable ULP mode (force=false); otherwise, for example when unloading
+ *  the driver or during Sx->S0 transitions, this is called with force=true
+ *  to forcibly disable ULP.
+ */
+static s32 e1000_disable_ulp_lpt_lp(struct e1000_hw *hw, bool force)
+{
+	s32 ret_val = 0;
+	u32 mac_reg;
+	u16 phy_reg;
+	int i = 0;
+
+	if ((hw->mac.type < e1000_pch_lpt) ||
+	    (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPT_I217_LM) ||
+	    (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPT_I217_V) ||
+	    (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_LM2) ||
+	    (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_V2) ||
+	    (hw->dev_spec.ich8lan.ulp_state == e1000_ulp_state_off))
+		return 0;
+
+	if (er32(FWSM) & E1000_ICH_FWSM_FW_VALID) {
+		if (force) {
+			/* Request ME un-configure ULP mode in the PHY */
+			mac_reg = er32(H2ME);
+			mac_reg &= ~E1000_H2ME_ULP;
+			mac_reg |= E1000_H2ME_ENFORCE_SETTINGS;
+			ew32(H2ME, mac_reg);
+		}
+
+		/* Poll up to 100msec for ME to clear ULP_CFG_DONE */
+		while (er32(FWSM) & E1000_FWSM_ULP_CFG_DONE) {
+			if (i++ == 10) {
+				ret_val = -E1000_ERR_PHY;
+				goto out;
+			}
+
+			usleep_range(10000, 20000);
+		}
+		e_dbg("ULP_CONFIG_DONE cleared after %dmsec\n", i * 10);
+
+		if (force) {
+			mac_reg = er32(H2ME);
+			mac_reg &= ~E1000_H2ME_ENFORCE_SETTINGS;
+			ew32(H2ME, mac_reg);
+		} else {
+			/* Clear H2ME.ULP after ME ULP configuration */
+			mac_reg = er32(H2ME);
+			mac_reg &= ~E1000_H2ME_ULP;
+			ew32(H2ME, mac_reg);
+		}
+
+		goto out;
+	}
+
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		goto out;
+
+	if (force)
+		/* Toggle LANPHYPC Value bit */
+		e1000_toggle_lanphypc_pch_lpt(hw);
+
+	/* Unforce SMBus mode in PHY */
+	ret_val = e1000_read_phy_reg_hv_locked(hw, CV_SMB_CTRL, &phy_reg);
+	if (ret_val) {
+		/* The MAC might be in PCIe mode, so temporarily force to
+		 * SMBus mode in order to access the PHY.
+		 */
+		mac_reg = er32(CTRL_EXT);
+		mac_reg |= E1000_CTRL_EXT_FORCE_SMBUS;
+		ew32(CTRL_EXT, mac_reg);
+
+		msleep(50);
+
+		ret_val = e1000_read_phy_reg_hv_locked(hw, CV_SMB_CTRL,
+						       &phy_reg);
+		if (ret_val)
+			goto release;
+	}
+	phy_reg &= ~CV_SMB_CTRL_FORCE_SMBUS;
+	e1000_write_phy_reg_hv_locked(hw, CV_SMB_CTRL, phy_reg);
+
+	/* Unforce SMBus mode in MAC */
+	mac_reg = er32(CTRL_EXT);
+	mac_reg &= ~E1000_CTRL_EXT_FORCE_SMBUS;
+	ew32(CTRL_EXT, mac_reg);
+
+	/* When ULP mode was previously entered, K1 was disabled by the
+	 * hardware.  Re-Enable K1 in the PHY when exiting ULP.
+	 */
+	ret_val = e1000_read_phy_reg_hv_locked(hw, HV_PM_CTRL, &phy_reg);
+	if (ret_val)
+		goto release;
+	phy_reg |= HV_PM_CTRL_K1_ENABLE;
+	e1000_write_phy_reg_hv_locked(hw, HV_PM_CTRL, phy_reg);
+
+	/* Clear ULP enabled configuration */
+	ret_val = e1000_read_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, &phy_reg);
+	if (ret_val)
+		goto release;
+	phy_reg &= ~(I218_ULP_CONFIG1_IND |
+		     I218_ULP_CONFIG1_STICKY_ULP |
+		     I218_ULP_CONFIG1_RESET_TO_SMBUS |
+		     I218_ULP_CONFIG1_WOL_HOST |
+		     I218_ULP_CONFIG1_INBAND_EXIT |
+		     I218_ULP_CONFIG1_DISABLE_SMB_PERST);
+	e1000_write_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, phy_reg);
+
+	/* Commit ULP changes by starting auto ULP configuration */
+	phy_reg |= I218_ULP_CONFIG1_START;
+	e1000_write_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, phy_reg);
+
+	/* Clear Disable SMBus Release on PERST# in MAC */
+	mac_reg = er32(FEXTNVM7);
+	mac_reg &= ~E1000_FEXTNVM7_DISABLE_SMB_PERST;
+	ew32(FEXTNVM7, mac_reg);
+
+release:
+	hw->phy.ops.release(hw);
+	if (force) {
+		e1000_phy_hw_reset(hw);
+		msleep(50);
+	}
+out:
+	if (ret_val)
+		e_dbg("Error in ULP disable flow: %d\n", ret_val);
+	else
+		hw->dev_spec.ich8lan.ulp_state = e1000_ulp_state_off;
+
+	return ret_val;
+}
+
 /**
  *  e1000_check_for_copper_link_ich8lan - Check for link (Copper)
  *  @hw: pointer to the HW structure
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.h b/drivers/net/ethernet/intel/e1000e/ich8lan.h
index 51e0b157a731..553f05ec0278 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.h
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.h
@@ -58,11 +58,16 @@
 
 #define E1000_FWSM_WLOCK_MAC_MASK	0x0380
 #define E1000_FWSM_WLOCK_MAC_SHIFT	7
+#define E1000_FWSM_ULP_CFG_DONE		0x00000400	/* Low power cfg done */
 
 /* Shared Receive Address Registers */
 #define E1000_SHRAL_PCH_LPT(_i)		(0x05408 + ((_i) * 8))
 #define E1000_SHRAH_PCH_LPT(_i)		(0x0540C + ((_i) * 8))
 
+#define E1000_H2ME		0x05B50	/* Host to ME */
+#define E1000_H2ME_ULP		0x00000800	/* ULP Indication Bit */
+#define E1000_H2ME_ENFORCE_SETTINGS	0x00001000	/* Enforce Settings */
+
 #define ID_LED_DEFAULT_ICH8LAN	((ID_LED_DEF1_DEF2 << 12) | \
 				 (ID_LED_OFF1_OFF2 <<  8) | \
 				 (ID_LED_OFF1_ON2  <<  4) | \
@@ -75,6 +80,9 @@
 
 #define E1000_ICH8_LAN_INIT_TIMEOUT	1500
 
+/* FEXT register bit definition */
+#define E1000_FEXT_PHY_CABLE_DISCONNECTED	0x00000004
+
 #define E1000_FEXTNVM_SW_CONFIG		1
 #define E1000_FEXTNVM_SW_CONFIG_ICH8M	(1 << 27)	/* different on ICH8M */
 
@@ -88,6 +96,8 @@
 #define E1000_FEXTNVM6_REQ_PLL_CLK	0x00000100
 #define E1000_FEXTNVM6_ENABLE_K1_ENTRY_CONDITION	0x00000200
 
+#define E1000_FEXTNVM7_DISABLE_SMB_PERST	0x00000020
+
 #define PCIE_ICH8_SNOOP_ALL	PCIE_NO_SNOOP_ALL
 
 #define E1000_ICH_RAR_ENTRIES	7
@@ -154,6 +164,16 @@
 #define CV_SMB_CTRL		PHY_REG(769, 23)
 #define CV_SMB_CTRL_FORCE_SMBUS	0x0001
 
+/* I218 Ultra Low Power Configuration 1 Register */
+#define I218_ULP_CONFIG1		PHY_REG(779, 16)
+#define I218_ULP_CONFIG1_START		0x0001	/* Start auto ULP config */
+#define I218_ULP_CONFIG1_IND		0x0004	/* Pwr up from ULP indication */
+#define I218_ULP_CONFIG1_STICKY_ULP	0x0010	/* Set sticky ULP mode */
+#define I218_ULP_CONFIG1_INBAND_EXIT	0x0020	/* Inband on ULP exit */
+#define I218_ULP_CONFIG1_WOL_HOST	0x0040	/* WoL Host on ULP exit */
+#define I218_ULP_CONFIG1_RESET_TO_SMBUS	0x0100	/* Reset to SMBus mode */
+#define I218_ULP_CONFIG1_DISABLE_SMB_PERST	0x1000	/* Disable on PERST# */
+
 /* SMBus Address Phy Register */
 #define HV_SMB_ADDR		PHY_REG(768, 26)
 #define HV_SMB_ADDR_MASK	0x007F
@@ -188,6 +208,7 @@
 /* PHY Power Management Control */
 #define HV_PM_CTRL		PHY_REG(770, 17)
 #define HV_PM_CTRL_PLL_STOP_IN_K1_GIGA	0x100
+#define HV_PM_CTRL_K1_ENABLE		0x4000
 
 #define SW_FLAG_TIMEOUT		1000	/* SW Semaphore flag timeout in ms */
 
@@ -262,4 +283,5 @@ s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable);
 s32 e1000_read_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 *data);
 s32 e1000_write_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 data);
 s32 e1000_set_eee_pchlan(struct e1000_hw *hw);
+s32 e1000_enable_ulp_lpt_lp(struct e1000_hw *hw, bool to_sx);
 #endif /* _E1000E_ICH8LAN_H_ */
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 7fd1feaeb405..5129c4cd14bc 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -5856,7 +5856,7 @@ static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
 static int e1000_init_phy_wakeup(struct e1000_adapter *adapter, u32 wufc)
 {
 	struct e1000_hw *hw = &adapter->hw;
-	u32 i, mac_reg;
+	u32 i, mac_reg, wuc;
 	u16 phy_reg, wuc_enable;
 	int retval;
 
@@ -5903,13 +5903,18 @@ static int e1000_init_phy_wakeup(struct e1000_adapter *adapter, u32 wufc)
 		phy_reg |= BM_RCTL_RFCE;
 	hw->phy.ops.write_reg_page(&adapter->hw, BM_RCTL, phy_reg);
 
+	wuc = E1000_WUC_PME_EN;
+	if (wufc & (E1000_WUFC_MAG | E1000_WUFC_LNKC))
+		wuc |= E1000_WUC_APME;
+
 	/* enable PHY wakeup in MAC register */
 	ew32(WUFC, wufc);
-	ew32(WUC, E1000_WUC_PHY_WAKE | E1000_WUC_PME_EN);
+	ew32(WUC, (E1000_WUC_PHY_WAKE | E1000_WUC_APMPME |
+		   E1000_WUC_PME_STATUS | wuc));
 
 	/* configure and enable PHY wakeup in PHY registers */
 	hw->phy.ops.write_reg_page(&adapter->hw, BM_WUFC, wufc);
-	hw->phy.ops.write_reg_page(&adapter->hw, BM_WUC, E1000_WUC_PME_EN);
+	hw->phy.ops.write_reg_page(&adapter->hw, BM_WUC, wuc);
 
 	/* activate PHY wakeup */
 	wuc_enable |= BM_WUC_ENABLE_BIT | BM_WUC_HOST_WU_BIT;
@@ -6012,8 +6017,19 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime)
 		e1000_power_down_phy(adapter);
 	}
 
-	if (adapter->hw.phy.type == e1000_phy_igp_3)
+	if (adapter->hw.phy.type == e1000_phy_igp_3) {
 		e1000e_igp3_phy_powerdown_workaround_ich8lan(&adapter->hw);
+	} else if (hw->mac.type == e1000_pch_lpt) {
+		if (!(wufc & (E1000_WUFC_EX | E1000_WUFC_MC | E1000_WUFC_BC)))
+			/* ULP does not support wake from unicast, multicast
+			 * or broadcast.
+			 */
+			retval = e1000_enable_ulp_lpt_lp(hw, !runtime);
+
+		if (retval)
+			return retval;
+	}
+
 
 	/* Release control of h/w to f/w.  If f/w is AMT enabled, this
 	 * would have already happened in close and is redundant.
diff --git a/drivers/net/ethernet/intel/e1000e/regs.h b/drivers/net/ethernet/intel/e1000e/regs.h
index 5c55ef348fc2..ea235bbe50d3 100644
--- a/drivers/net/ethernet/intel/e1000e/regs.h
+++ b/drivers/net/ethernet/intel/e1000e/regs.h
@@ -32,6 +32,7 @@
 #define E1000_SCTL	0x00024	/* SerDes Control - RW */
 #define E1000_FCAL	0x00028	/* Flow Control Address Low - RW */
 #define E1000_FCAH	0x0002C	/* Flow Control Address High -RW */
+#define E1000_FEXT	0x0002C	/* Future Extended - RW */
 #define E1000_FEXTNVM	0x00028	/* Future Extended NVM - RW */
 #define E1000_FEXTNVM3	0x0003C	/* Future Extended NVM 3 - RW */
 #define E1000_FEXTNVM4	0x00024	/* Future Extended NVM 4 - RW */
-- 
cgit v1.2.2


From 5bb731760810b30d67096cbdded96addba4f1292 Mon Sep 17 00:00:00 2001
From: David Ertman <davidx.m.ertman@intel.com>
Date: Wed, 26 Feb 2014 00:02:24 +0000
Subject: e1000e: Fix not generating an error on invalid load parameter

Valid values for InterruptThrottleRate are 10-100000, or one of
0, 1, 3, 4.  '2' is not valid.  This is a legacy from the branching
from the e1000 driver code that e1000e was based from.

Prior to this patch, if the e1000e driver  was loaded with a forced
invalid InterruptThrottleRate of '2', then no throttle rate would be
set and no error message generated.

Now, a message will be generated that an invalid value was used and the
value for InterruptThrottleRate will be set to the default value.

Signed-off-by: Dave Ertman <davidx.m.ertman@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/e1000e/param.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/e1000e/param.c b/drivers/net/ethernet/intel/e1000e/param.c
index 01797b73e20c..d0ac0f3249c8 100644
--- a/drivers/net/ethernet/intel/e1000e/param.c
+++ b/drivers/net/ethernet/intel/e1000e/param.c
@@ -374,6 +374,12 @@ void e1000e_check_options(struct e1000_adapter *adapter)
 				 "%s set to dynamic mode\n", opt.name);
 			adapter->itr = 20000;
 			break;
+		case 2:
+			dev_info(&adapter->pdev->dev,
+				 "%s Invalid mode - setting default\n",
+				 opt.name);
+			adapter->itr_setting = opt.def;
+			/* fall-through */
 		case 3:
 			dev_info(&adapter->pdev->dev,
 				 "%s set to dynamic conservative mode\n",
-- 
cgit v1.2.2


From ad40064e88df1a95a3532a35071e46d8db1fbe74 Mon Sep 17 00:00:00 2001
From: David Ertman <davidx.m.ertman@intel.com>
Date: Wed, 5 Mar 2014 07:54:19 +0000
Subject: e1000e: Fix ethtool offline tests for 82579 parts

Changes to the rar_entry_count value require a change to the indexing
used to access the SHRA[H|L] registers when testing them with
'ethtool -t <iface> offline'

Signed-off-by: Dave Ertman <davidx.m.ertman@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/e1000e/ethtool.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c
index 7a479022a8c6..3c2898d0c2aa 100644
--- a/drivers/net/ethernet/intel/e1000e/ethtool.c
+++ b/drivers/net/ethernet/intel/e1000e/ethtool.c
@@ -917,15 +917,21 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
 		}
 		if (mac->type == e1000_pch2lan) {
 			/* SHRAH[0,1,2] different than previous */
-			if (i == 7)
+			if (i == 1)
 				mask &= 0xFFF4FFFF;
 			/* SHRAH[3] different than SHRAH[0,1,2] */
-			if (i == 10)
+			if (i == 4)
 				mask |= (1 << 30);
+			/* RAR[1-6] owned by management engine - skipping */
+			if (i > 0)
+				i += 6;
 		}
 
 		REG_PATTERN_TEST_ARRAY(E1000_RA, ((i << 1) + 1), mask,
 				       0xFFFFFFFF);
+		/* reset index to actual value */
+		if ((mac->type == e1000_pch2lan) && (i > 6))
+			i -= 6;
 	}
 
 	for (i = 0; i < mac->mta_reg_count; i++)
-- 
cgit v1.2.2


From 96dee024ca4799d6d21588951240035c21ba1c67 Mon Sep 17 00:00:00 2001
From: David Ertman <davidx.m.ertman@intel.com>
Date: Wed, 5 Mar 2014 07:50:46 +0000
Subject: e1000e: Fix SHRA register access for 82579

Previous commit c3a0dce35af0 fixed an overrun for the RAR on i218 devices.
This commit also attempted to homogenize the RAR/SHRA access for all parts
accessed by the e1000e driver.  This change introduced an error for
assigning MAC addresses to guest OS's for 82579 devices.

Only RAR[0] is accessible to the driver for 82579 parts, and additional
addresses must be placed into the SHRA[L|H] registers.  The rar_entry_count
was changed in the previous commit to an inaccurate value that accounted
for all RAR and SHRA registers, not just the ones usable by the driver.

This patch fixes the count to the correct value and adjusts the
e1000_rar_set_pch2lan() function to user the correct index.

Cc: John Greene <jogreene@redhat.com>
Signed-off-by: Dave Ertman <davidx.m.ertman@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/e1000e/ich8lan.c | 2 +-
 drivers/net/ethernet/intel/e1000e/ich8lan.h | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 18984519a18d..9866f264f55e 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -1675,7 +1675,7 @@ static void e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index)
 	/* RAR[1-6] are owned by manageability.  Skip those and program the
 	 * next address into the SHRA register array.
 	 */
-	if (index < (u32)(hw->mac.rar_entry_count - 6)) {
+	if (index < (u32)(hw->mac.rar_entry_count)) {
 		s32 ret_val;
 
 		ret_val = e1000_acquire_swflag_ich8lan(hw);
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.h b/drivers/net/ethernet/intel/e1000e/ich8lan.h
index 553f05ec0278..bead50f9187b 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.h
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.h
@@ -101,7 +101,7 @@
 #define PCIE_ICH8_SNOOP_ALL	PCIE_NO_SNOOP_ALL
 
 #define E1000_ICH_RAR_ENTRIES	7
-#define E1000_PCH2_RAR_ENTRIES	11      /* RAR[0-6], SHRA[0-3] */
+#define E1000_PCH2_RAR_ENTRIES	5	/* RAR[0], SHRA[0-3] */
 #define E1000_PCH_LPT_RAR_ENTRIES	12	/* RAR[0], SHRA[0-10] */
 
 #define PHY_PAGE_SHIFT		5
-- 
cgit v1.2.2


From bd9d55929df54b67708460d7eda84a7d7924009d Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Fri, 28 Feb 2014 15:46:49 -0800
Subject: ixgbevf: fix skb->pkt_type checks

skb->pkt_type is not a bitmask, but contains only value at a time from
the range defined in include/uapi/linux/if_packet.h.

Checking it like if it was a bitmask of values would also cause
PACKET_OTHERHOST, PACKET_LOOPBACK and PACKET_FASTROUTE to be matched by
this check since their lower 2 bits are also set, although that does not
fix a real bug, it is still potentially confusing.

This bogus check was introduced in commit 815cccbf ("ixgbe: add setlink,
getlink support to ixgbe and ixgbevf").

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
index 57e0cd89b3dc..6ac5da219150 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
@@ -516,7 +516,8 @@ static int ixgbevf_clean_rx_irq(struct ixgbevf_q_vector *q_vector,
 		/* Workaround hardware that can't do proper VEPA multicast
 		 * source pruning.
 		 */
-		if ((skb->pkt_type & (PACKET_BROADCAST | PACKET_MULTICAST)) &&
+		if ((skb->pkt_type == PACKET_BROADCAST ||
+		    skb->pkt_type == PACKET_MULTICAST) &&
 		    ether_addr_equal(rx_ring->netdev->dev_addr,
 				     eth_hdr(skb)->h_source)) {
 			dev_kfree_skb_irq(skb);
-- 
cgit v1.2.2


From 72b36727080c712859d4b8b363ae5ddadb81a0d3 Mon Sep 17 00:00:00 2001
From: Todd Fujinaka <todd.fujinaka@intel.com>
Date: Tue, 4 Mar 2014 02:25:22 +0000
Subject: igb: fix array size calculation

Use ARRAY_SIZE for array size calculation.

Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/igb/e1000_82575.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c
index 45947b3f7d92..1da4e87cc879 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -76,8 +76,6 @@ static s32 igb_update_nvm_checksum_i350(struct e1000_hw *hw);
 static const u16 e1000_82580_rxpbs_table[] =
 	{ 36, 72, 144, 1, 2, 4, 8, 16,
 	  35, 70, 140 };
-#define E1000_82580_RXPBS_TABLE_SIZE \
-	(sizeof(e1000_82580_rxpbs_table)/sizeof(u16))
 
 /**
  *  igb_sgmii_uses_mdio_82575 - Determine if I2C pins are for external MDIO
@@ -2307,7 +2305,7 @@ u16 igb_rxpbs_adjust_82580(u32 data)
 {
 	u16 ret_val = 0;
 
-	if (data < E1000_82580_RXPBS_TABLE_SIZE)
+	if (data < ARRAY_SIZE(e1000_82580_rxpbs_table))
 		ret_val = e1000_82580_rxpbs_table[data];
 
 	return ret_val;
-- 
cgit v1.2.2


From 9b143d11a43aa7c188d53a996cdc9172e5b4b4b0 Mon Sep 17 00:00:00 2001
From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Thu, 6 Mar 2014 05:28:06 +0000
Subject: igb: fix warning if !CONFIG_IGB_HWMON

Fix warning about code defined but never used if IGB_HWMON not defined.

Reported-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/igb/e1000_82575.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c
index 1da4e87cc879..fa36fe12e775 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -2711,6 +2711,7 @@ static const u8 e1000_emc_therm_limit[4] = {
 	E1000_EMC_DIODE3_THERM_LIMIT
 };
 
+#ifdef CONFIG_IGB_HWMON
 /**
  *  igb_get_thermal_sensor_data_generic - Gathers thermal sensor data
  *  @hw: pointer to hardware structure
@@ -2833,6 +2834,7 @@ static s32 igb_init_thermal_sensor_thresh_generic(struct e1000_hw *hw)
 	return status;
 }
 
+#endif
 static struct e1000_mac_operations e1000_mac_ops_82575 = {
 	.init_hw              = igb_init_hw_82575,
 	.check_for_link       = igb_check_for_link_82575,
-- 
cgit v1.2.2


From d07913aa52fad756df40347893091aeb57455066 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Wed, 26 Feb 2014 11:25:58 +0100
Subject: iwlwifi: mvm: init drv_stats_lock

Otherwise lockdep complains about the lock, I'm not sure
why we didn't see this before.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/debugfs.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/debugfs.c b/drivers/net/wireless/iwlwifi/mvm/debugfs.c
index e0ff43ed2482..41c637034687 100644
--- a/drivers/net/wireless/iwlwifi/mvm/debugfs.c
+++ b/drivers/net/wireless/iwlwifi/mvm/debugfs.c
@@ -1049,6 +1049,8 @@ int iwl_mvm_dbgfs_register(struct iwl_mvm *mvm, struct dentry *dbgfs_dir)
 	struct dentry *bcast_dir __maybe_unused;
 	char buf[100];
 
+	spin_lock_init(&mvm->drv_stats_lock);
+
 	mvm->debugfs_dir = dbgfs_dir;
 
 	MVM_DEBUGFS_ADD_FILE(tx_flush, mvm->debugfs_dir, S_IWUSR);
-- 
cgit v1.2.2


From c42e8109103c0773c1e76704d9e4ff57cf1d2a71 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Wed, 26 Feb 2014 11:16:56 +0100
Subject: iwlwifi: pcie: suppress ACPI related error message

This message triggers on systems that don't support the API,
so suppress them when not debugging as it's not useful to
see it there.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/pcie/drv.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/pcie/drv.c b/drivers/net/wireless/iwlwifi/pcie/drv.c
index 0f52e961a5a5..22b6b7ee5fd2 100644
--- a/drivers/net/wireless/iwlwifi/pcie/drv.c
+++ b/drivers/net/wireless/iwlwifi/pcie/drv.c
@@ -448,7 +448,8 @@ static void set_dflt_pwr_limit(struct iwl_trans *trans, struct pci_dev *pdev)
 
 	pxsx_handle = ACPI_HANDLE(&pdev->dev);
 	if (!pxsx_handle) {
-		IWL_ERR(trans, "Could not retrieve root port ACPI handle");
+		IWL_DEBUG_INFO(trans,
+			       "Could not retrieve root port ACPI handle");
 		return;
 	}
 
-- 
cgit v1.2.2


From f754b5ca0ac40dc7f805d6fe7de911ccf1d0f0e2 Mon Sep 17 00:00:00 2001
From: Eyal Shapira <eyal@wizery.com>
Date: Mon, 24 Feb 2014 10:24:34 +0200
Subject: iwlwifi: mvm: cleanups in iwl_dbgfs_frame_stats_read

Switch pos to char * which makes the code a bit shorter
as well as other minor cleanups suggested by Joe Perches.

Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/debugfs.c | 34 +++++++++++++++++-------------
 1 file changed, 19 insertions(+), 15 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/debugfs.c b/drivers/net/wireless/iwlwifi/mvm/debugfs.c
index 41c637034687..e3b42b4fa438 100644
--- a/drivers/net/wireless/iwlwifi/mvm/debugfs.c
+++ b/drivers/net/wireless/iwlwifi/mvm/debugfs.c
@@ -536,56 +536,60 @@ static ssize_t iwl_dbgfs_frame_stats_read(struct iwl_mvm *mvm,
 					  loff_t *ppos,
 					  struct iwl_mvm_frame_stats *stats)
 {
-	char *buff;
-	int pos = 0, idx, i;
+	char *buff, *pos, *endpos;
+	int idx, i;
 	int ret;
-	size_t bufsz = 1024;
+	static const size_t bufsz = 1024;
 
 	buff = kmalloc(bufsz, GFP_KERNEL);
 	if (!buff)
 		return -ENOMEM;
 
 	spin_lock_bh(&mvm->drv_stats_lock);
-	pos += scnprintf(buff + pos, bufsz - pos,
+
+	pos = buff;
+	endpos = pos + bufsz;
+
+	pos += scnprintf(pos, endpos - pos,
 			 "Legacy/HT/VHT\t:\t%d/%d/%d\n",
 			 stats->legacy_frames,
 			 stats->ht_frames,
 			 stats->vht_frames);
-	pos += scnprintf(buff + pos, bufsz - pos, "20/40/80\t:\t%d/%d/%d\n",
+	pos += scnprintf(pos, endpos - pos, "20/40/80\t:\t%d/%d/%d\n",
 			 stats->bw_20_frames,
 			 stats->bw_40_frames,
 			 stats->bw_80_frames);
-	pos += scnprintf(buff + pos, bufsz - pos, "NGI/SGI\t\t:\t%d/%d\n",
+	pos += scnprintf(pos, endpos - pos, "NGI/SGI\t\t:\t%d/%d\n",
 			 stats->ngi_frames,
 			 stats->sgi_frames);
-	pos += scnprintf(buff + pos, bufsz - pos, "SISO/MIMO2\t:\t%d/%d\n",
+	pos += scnprintf(pos, endpos - pos, "SISO/MIMO2\t:\t%d/%d\n",
 			 stats->siso_frames,
 			 stats->mimo2_frames);
-	pos += scnprintf(buff + pos, bufsz - pos, "FAIL/SCSS\t:\t%d/%d\n",
+	pos += scnprintf(pos, endpos - pos, "FAIL/SCSS\t:\t%d/%d\n",
 			 stats->fail_frames,
 			 stats->success_frames);
-	pos += scnprintf(buff + pos, bufsz - pos, "MPDUs agg\t:\t%d\n",
+	pos += scnprintf(pos, endpos - pos, "MPDUs agg\t:\t%d\n",
 			 stats->agg_frames);
-	pos += scnprintf(buff + pos, bufsz - pos, "A-MPDUs\t\t:\t%d\n",
+	pos += scnprintf(pos, endpos - pos, "A-MPDUs\t\t:\t%d\n",
 			 stats->ampdu_count);
-	pos += scnprintf(buff + pos, bufsz - pos, "Avg MPDUs/A-MPDU:\t%d\n",
+	pos += scnprintf(pos, endpos - pos, "Avg MPDUs/A-MPDU:\t%d\n",
 			 stats->ampdu_count > 0 ?
 			 (stats->agg_frames / stats->ampdu_count) : 0);
 
-	pos += scnprintf(buff + pos, bufsz - pos, "Last Rates\n");
+	pos += scnprintf(pos, endpos - pos, "Last Rates\n");
 
 	idx = stats->last_frame_idx - 1;
 	for (i = 0; i < ARRAY_SIZE(stats->last_rates); i++) {
 		idx = (idx + 1) % ARRAY_SIZE(stats->last_rates);
 		if (stats->last_rates[idx] == 0)
 			continue;
-		pos += scnprintf(buff + pos, bufsz - pos, "Rate[%d]: ",
+		pos += scnprintf(pos, endpos - pos, "Rate[%d]: ",
 				 (int)(ARRAY_SIZE(stats->last_rates) - i));
-		pos += rs_pretty_print_rate(buff + pos, stats->last_rates[idx]);
+		pos += rs_pretty_print_rate(pos, stats->last_rates[idx]);
 	}
 	spin_unlock_bh(&mvm->drv_stats_lock);
 
-	ret = simple_read_from_buffer(user_buf, count, ppos, buff, pos);
+	ret = simple_read_from_buffer(user_buf, count, ppos, buff, pos - buff);
 	kfree(buff);
 
 	return ret;
-- 
cgit v1.2.2


From 9a3daf820166d835ef9f83019184abb3f2a15826 Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Wed, 5 Mar 2014 10:00:44 +0200
Subject: iwlwifi: mvm: fix quota for D3 image

New firmware enforce valid values for the quota in D3.
The values given to the firmware when suspending and using
WoWLAN where dummy - change them to realistics values.

Tested-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/d3.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/d3.c b/drivers/net/wireless/iwlwifi/mvm/d3.c
index b956e2f0b631..a08756456e10 100644
--- a/drivers/net/wireless/iwlwifi/mvm/d3.c
+++ b/drivers/net/wireless/iwlwifi/mvm/d3.c
@@ -846,8 +846,8 @@ static int iwl_mvm_d3_reprogram(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
 	quota_cmd.quotas[0].id_and_color =
 		cpu_to_le32(FW_CMD_ID_AND_COLOR(mvmvif->phy_ctxt->id,
 						mvmvif->phy_ctxt->color));
-	quota_cmd.quotas[0].quota = cpu_to_le32(100);
-	quota_cmd.quotas[0].max_duration = cpu_to_le32(1000);
+	quota_cmd.quotas[0].quota = cpu_to_le32(IWL_MVM_MAX_QUOTA);
+	quota_cmd.quotas[0].max_duration = cpu_to_le32(IWL_MVM_MAX_QUOTA);
 
 	for (i = 1; i < MAX_BINDINGS; i++)
 		quota_cmd.quotas[i].id_and_color = cpu_to_le32(FW_CTXT_INVALID);
-- 
cgit v1.2.2


From 6ca89f1fd8c247e58d6e34528f3a4890dd8003c6 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Wed, 12 Feb 2014 21:56:26 +0100
Subject: iwlwifi: nvm: fix VHT capability antenna-dependent fields

As the antenna dependent fields depend on the firmware file and not
the NVM, use those fields in the VHT capability creation.

Additionally, fix the STBC and antenna pattern consistency fields.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-nvm-parse.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
index 2f962ec0b750..6be30c698506 100644
--- a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
+++ b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
@@ -299,9 +299,11 @@ static int iwl_init_channel_map(struct device *dev, const struct iwl_cfg *cfg,
 
 static void iwl_init_vht_hw_capab(const struct iwl_cfg *cfg,
 				  struct iwl_nvm_data *data,
-				  struct ieee80211_sta_vht_cap *vht_cap)
+				  struct ieee80211_sta_vht_cap *vht_cap,
+				  u8 tx_chains, u8 rx_chains)
 {
-	int num_ants = num_of_ant(data->valid_rx_ant);
+	int num_rx_ants = num_of_ant(rx_chains);
+	int num_tx_ants = num_of_ant(tx_chains);
 
 	vht_cap->vht_supported = true;
 
@@ -311,8 +313,10 @@ static void iwl_init_vht_hw_capab(const struct iwl_cfg *cfg,
 		       3 << IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT |
 		       7 << IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_SHIFT;
 
-	if (num_ants > 1)
+	if (num_tx_ants > 1)
 		vht_cap->cap |= IEEE80211_VHT_CAP_TXSTBC;
+	else
+		vht_cap->cap |= IEEE80211_VHT_CAP_TX_ANTENNA_PATTERN;
 
 	if (iwlwifi_mod_params.amsdu_size_8K)
 		vht_cap->cap |= IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_7991;
@@ -327,10 +331,8 @@ static void iwl_init_vht_hw_capab(const struct iwl_cfg *cfg,
 			    IEEE80211_VHT_MCS_NOT_SUPPORTED << 12 |
 			    IEEE80211_VHT_MCS_NOT_SUPPORTED << 14);
 
-	if (num_ants == 1 ||
-	    cfg->rx_with_siso_diversity) {
-		vht_cap->cap |= IEEE80211_VHT_CAP_RX_ANTENNA_PATTERN |
-				IEEE80211_VHT_CAP_TX_ANTENNA_PATTERN;
+	if (num_rx_ants == 1 || cfg->rx_with_siso_diversity) {
+		vht_cap->cap |= IEEE80211_VHT_CAP_RX_ANTENNA_PATTERN;
 		/* this works because NOT_SUPPORTED == 3 */
 		vht_cap->vht_mcs.rx_mcs_map |=
 			cpu_to_le16(IEEE80211_VHT_MCS_NOT_SUPPORTED << 2);
@@ -375,7 +377,8 @@ static void iwl_init_sbands(struct device *dev, const struct iwl_cfg *cfg,
 	iwl_init_ht_hw_capab(cfg, data, &sband->ht_cap, IEEE80211_BAND_5GHZ,
 			     tx_chains, rx_chains);
 	if (enable_vht)
-		iwl_init_vht_hw_capab(cfg, data, &sband->vht_cap);
+		iwl_init_vht_hw_capab(cfg, data, &sband->vht_cap,
+				      tx_chains, rx_chains);
 
 	if (n_channels != n_used)
 		IWL_ERR_DEV(dev, "NVM: used only %d of %d channels\n",
-- 
cgit v1.2.2


From 8ea0c68fe56983f40256d0407ecf19530fd31442 Mon Sep 17 00:00:00 2001
From: Avri Altman <avri.altman@intel.com>
Date: Thu, 20 Feb 2014 13:28:57 +0200
Subject: iwlwifi: mvm: disable power on P2P client when BSS is added

When power update is initiated on BSS STA while P2P client
exists, the power command will be sent only on BSS STA vif
ignoring P2P client.

Since the firmware has symmetric constraints on the power
save enablement we can simplify the code a bit.

The current firmware doesn't know how to enable power
management on P2P client. Even BSS power management must
be disabled when a P2P client is added.

Future firmware will support power save on BSS and P2P client
as long as they are on different channels.
This was buggy since we didn't disable power management on
P2P client interface if BSS added on the same channel.

Signed-off-by: Avri Altman <avri.altman@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/power.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/power.c b/drivers/net/wireless/iwlwifi/mvm/power.c
index def6ec5173b9..6b636eab3339 100644
--- a/drivers/net/wireless/iwlwifi/mvm/power.c
+++ b/drivers/net/wireless/iwlwifi/mvm/power.c
@@ -511,6 +511,7 @@ int iwl_mvm_power_uapsd_misbehaving_ap_notif(struct iwl_mvm *mvm,
 struct iwl_power_constraint {
 	struct ieee80211_vif *bf_vif;
 	struct ieee80211_vif *bss_vif;
+	struct ieee80211_vif *p2p_vif;
 	u16 bss_phyctx_id;
 	u16 p2p_phyctx_id;
 	bool pm_disabled;
@@ -546,6 +547,10 @@ static void iwl_mvm_power_iterator(void *_data, u8 *mac,
 		if (mvmvif->phy_ctxt)
 			power_iterator->p2p_phyctx_id = mvmvif->phy_ctxt->id;
 
+		/* we should have only one P2P vif */
+		WARN_ON(power_iterator->p2p_vif);
+		power_iterator->p2p_vif = vif;
+
 		IWL_DEBUG_POWER(mvm, "p2p: p2p_id=%d, bss_id=%d\n",
 				power_iterator->p2p_phyctx_id,
 				power_iterator->bss_phyctx_id);
@@ -633,16 +638,18 @@ int iwl_mvm_power_update_mac(struct iwl_mvm *mvm, struct ieee80211_vif *vif)
 			return ret;
 	}
 
-	ret = iwl_mvm_power_send_cmd(mvm, vif);
-	if (ret)
-		return ret;
-
-	if (constraint.bss_vif && vif != constraint.bss_vif) {
+	if (constraint.bss_vif) {
 		ret = iwl_mvm_power_send_cmd(mvm, constraint.bss_vif);
 		if (ret)
 			return ret;
 	}
 
+	if (constraint.p2p_vif) {
+		ret = iwl_mvm_power_send_cmd(mvm, constraint.p2p_vif);
+		if (ret)
+			return ret;
+	}
+
 	if (!constraint.bf_vif)
 		return 0;
 
-- 
cgit v1.2.2


From a812cba9bb141225ce28a48b60038e115620bccd Mon Sep 17 00:00:00 2001
From: Alexander Bondar <alexander.bondar@intel.com>
Date: Tue, 18 Feb 2014 16:45:00 +0100
Subject: iwlwifi: pcie: enable LP XTAL to reduce power consumption

1. Enable LP XTAL to avoid HW bug where device may consume much
power if FW is not loaded after device reset. LP XTAL is
disabled by default after device HW reset. Configure device's
"persistence" mode to avoid resetting XTAL again when SHRD_HW_RST
occurs in S3.

2. Add methods to access SHR (shared block memory space) directly from PCI
bus w/o need to power up MAC HW.

Shared internal registers (e.g. SHR_APMG_GP1, SHR_APMG_XTAL_CFG)can be
accessed directly from PCI bus through SHR arbiter even when MAC HW is
powered down. This is possible due to indirect read/write via
HEEP_CTRL_WRD_PCIEX_CTRL (0xEC) and HEEP_CTRL_WRD_PCIEX_DATA (0xF4)
registers.

Use iwl_write32()/iwl_read32() family to access these registers. The MAC HW
need not be powered up so no "grab inc access" is required.

For example, to read from SHR_APMG_GP1 register (0x1DC),
first, write to the control register:
HEEP_CTRL_WRD_PCIEX_CTRL[15:0] = 0x1DC (offset of the SHR_APMG_GP1 register)
HEEP_CTRL_WRD_PCIEX_CTRL[29:28] = 2 (read access)
second, read from the data register HEEP_CTRL_WRD_PCIEX_DATA[31:0].

To write the register, first, write to the data register
HEEP_CTRL_WRD_PCIEX_DATA[31:0] and then:
HEEP_CTRL_WRD_PCIEX_CTRL[15:0] = 0x1DC (offset of the SHR_APMG_GP1 register)
HEEP_CTRL_WRD_PCIEX_CTRL[29:28] = 3 (write access)

Signed-off-by: Alexander Bondar <alexander.bondar@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-7000.c   |   4 +
 drivers/net/wireless/iwlwifi/iwl-config.h |   1 +
 drivers/net/wireless/iwlwifi/iwl-csr.h    |  38 +++++++++
 drivers/net/wireless/iwlwifi/iwl-io.c     |   4 +-
 drivers/net/wireless/iwlwifi/iwl-io.h     |   2 +
 drivers/net/wireless/iwlwifi/iwl-prph.h   |  23 +++++-
 drivers/net/wireless/iwlwifi/pcie/trans.c | 131 ++++++++++++++++++++++++++++++
 7 files changed, 200 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-7000.c b/drivers/net/wireless/iwlwifi/iwl-7000.c
index fbd262ffa497..003a546571d4 100644
--- a/drivers/net/wireless/iwlwifi/iwl-7000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-7000.c
@@ -134,6 +134,7 @@ const struct iwl_cfg iwl7260_2ac_cfg = {
 	.nvm_ver = IWL7260_NVM_VERSION,
 	.nvm_calib_ver = IWL7260_TX_POWER_VERSION,
 	.host_interrupt_operation_mode = true,
+	.lp_xtal_workaround = true,
 };
 
 const struct iwl_cfg iwl7260_2ac_cfg_high_temp = {
@@ -145,6 +146,7 @@ const struct iwl_cfg iwl7260_2ac_cfg_high_temp = {
 	.nvm_calib_ver = IWL7260_TX_POWER_VERSION,
 	.high_temp = true,
 	.host_interrupt_operation_mode = true,
+	.lp_xtal_workaround = true,
 };
 
 const struct iwl_cfg iwl7260_2n_cfg = {
@@ -155,6 +157,7 @@ const struct iwl_cfg iwl7260_2n_cfg = {
 	.nvm_ver = IWL7260_NVM_VERSION,
 	.nvm_calib_ver = IWL7260_TX_POWER_VERSION,
 	.host_interrupt_operation_mode = true,
+	.lp_xtal_workaround = true,
 };
 
 const struct iwl_cfg iwl7260_n_cfg = {
@@ -165,6 +168,7 @@ const struct iwl_cfg iwl7260_n_cfg = {
 	.nvm_ver = IWL7260_NVM_VERSION,
 	.nvm_calib_ver = IWL7260_TX_POWER_VERSION,
 	.host_interrupt_operation_mode = true,
+	.lp_xtal_workaround = true,
 };
 
 const struct iwl_cfg iwl3160_2ac_cfg = {
diff --git a/drivers/net/wireless/iwlwifi/iwl-config.h b/drivers/net/wireless/iwlwifi/iwl-config.h
index 13ec56607d10..3f17dc3f2c8a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-config.h
+++ b/drivers/net/wireless/iwlwifi/iwl-config.h
@@ -262,6 +262,7 @@ struct iwl_cfg {
 	bool high_temp;
 	bool d0i3;
 	u8   nvm_hw_section_num;
+	bool lp_xtal_workaround;
 	const struct iwl_pwr_tx_backoff *pwr_tx_backoffs;
 };
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-csr.h b/drivers/net/wireless/iwlwifi/iwl-csr.h
index f13dec9ad9c9..fe129c94ae3e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-csr.h
+++ b/drivers/net/wireless/iwlwifi/iwl-csr.h
@@ -138,6 +138,13 @@
 /* Analog phase-lock-loop configuration  */
 #define CSR_ANA_PLL_CFG         (CSR_BASE+0x20c)
 
+/*
+ * CSR HW resources monitor registers
+ */
+#define CSR_MONITOR_CFG_REG		(CSR_BASE+0x214)
+#define CSR_MONITOR_STATUS_REG		(CSR_BASE+0x228)
+#define CSR_MONITOR_XTAL_RESOURCES	(0x00000010)
+
 /*
  * CSR Hardware Revision Workaround Register.  Indicates hardware rev;
  * "step" determines CCK backoff for txpower calculation.  Used for 4965 only.
@@ -173,6 +180,7 @@
 #define CSR_HW_IF_CONFIG_REG_BIT_NIC_READY	(0x00400000) /* PCI_OWN_SEM */
 #define CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE (0x02000000) /* ME_OWN */
 #define CSR_HW_IF_CONFIG_REG_PREPARE		  (0x08000000) /* WAKE_ME */
+#define CSR_HW_IF_CONFIG_REG_PERSIST_MODE	  (0x40000000) /* PERSISTENCE */
 
 #define CSR_INT_PERIODIC_DIS			(0x00) /* disable periodic int*/
 #define CSR_INT_PERIODIC_ENA			(0xFF) /* 255*32 usec ~ 8 msec*/
@@ -240,6 +248,7 @@
  *         001 -- MAC power-down
  *         010 -- PHY (radio) power-down
  *         011 -- Error
+ *    10:  XTAL ON request
  *   9-6:  SYS_CONFIG
  *         Indicates current system configuration, reflecting pins on chip
  *         as forced high/low by device circuit board.
@@ -271,6 +280,7 @@
 #define CSR_GP_CNTRL_REG_FLAG_INIT_DONE              (0x00000004)
 #define CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ         (0x00000008)
 #define CSR_GP_CNTRL_REG_FLAG_GOING_TO_SLEEP         (0x00000010)
+#define CSR_GP_CNTRL_REG_FLAG_XTAL_ON		     (0x00000400)
 
 #define CSR_GP_CNTRL_REG_VAL_MAC_ACCESS_EN           (0x00000001)
 
@@ -395,6 +405,34 @@
 #define CSR_DRAM_INT_TBL_ENABLE		(1 << 31)
 #define CSR_DRAM_INIT_TBL_WRAP_CHECK	(1 << 27)
 
+/*
+ * SHR target access (Shared block memory space)
+ *
+ * Shared internal registers can be accessed directly from PCI bus through SHR
+ * arbiter without need for the MAC HW to be powered up. This is possible due to
+ * indirect read/write via HEEP_CTRL_WRD_PCIEX_CTRL (0xEC) and
+ * HEEP_CTRL_WRD_PCIEX_DATA (0xF4) registers.
+ *
+ * Use iwl_write32()/iwl_read32() family to access these registers. The MAC HW
+ * need not be powered up so no "grab inc access" is required.
+ */
+
+/*
+ * Registers for accessing shared registers (e.g. SHR_APMG_GP1,
+ * SHR_APMG_XTAL_CFG). For example, to read from SHR_APMG_GP1 register (0x1DC),
+ * first, write to the control register:
+ * HEEP_CTRL_WRD_PCIEX_CTRL[15:0] = 0x1DC (offset of the SHR_APMG_GP1 register)
+ * HEEP_CTRL_WRD_PCIEX_CTRL[29:28] = 2 (read access)
+ * second, read from the data register HEEP_CTRL_WRD_PCIEX_DATA[31:0].
+ *
+ * To write the register, first, write to the data register
+ * HEEP_CTRL_WRD_PCIEX_DATA[31:0] and then:
+ * HEEP_CTRL_WRD_PCIEX_CTRL[15:0] = 0x1DC (offset of the SHR_APMG_GP1 register)
+ * HEEP_CTRL_WRD_PCIEX_CTRL[29:28] = 3 (write access)
+ */
+#define HEEP_CTRL_WRD_PCIEX_CTRL_REG	(CSR_BASE+0x0ec)
+#define HEEP_CTRL_WRD_PCIEX_DATA_REG	(CSR_BASE+0x0f4)
+
 /*
  * HBUS (Host-side Bus)
  *
diff --git a/drivers/net/wireless/iwlwifi/iwl-io.c b/drivers/net/wireless/iwlwifi/iwl-io.c
index 07372f2b0250..44cc3cf45762 100644
--- a/drivers/net/wireless/iwlwifi/iwl-io.c
+++ b/drivers/net/wireless/iwlwifi/iwl-io.c
@@ -93,14 +93,14 @@ int iwl_poll_direct_bit(struct iwl_trans *trans, u32 addr, u32 mask,
 }
 IWL_EXPORT_SYMBOL(iwl_poll_direct_bit);
 
-static inline u32 __iwl_read_prph(struct iwl_trans *trans, u32 ofs)
+u32 __iwl_read_prph(struct iwl_trans *trans, u32 ofs)
 {
 	u32 val = iwl_trans_read_prph(trans, ofs);
 	trace_iwlwifi_dev_ioread_prph32(trans->dev, ofs, val);
 	return val;
 }
 
-static inline void __iwl_write_prph(struct iwl_trans *trans, u32 ofs, u32 val)
+void __iwl_write_prph(struct iwl_trans *trans, u32 ofs, u32 val)
 {
 	trace_iwlwifi_dev_iowrite_prph32(trans->dev, ofs, val);
 	iwl_trans_write_prph(trans, ofs, val);
diff --git a/drivers/net/wireless/iwlwifi/iwl-io.h b/drivers/net/wireless/iwlwifi/iwl-io.h
index 9e81b23d738b..665ddd9dbbc4 100644
--- a/drivers/net/wireless/iwlwifi/iwl-io.h
+++ b/drivers/net/wireless/iwlwifi/iwl-io.h
@@ -70,7 +70,9 @@ u32 iwl_read_direct32(struct iwl_trans *trans, u32 reg);
 void iwl_write_direct32(struct iwl_trans *trans, u32 reg, u32 value);
 
 
+u32 __iwl_read_prph(struct iwl_trans *trans, u32 ofs);
 u32 iwl_read_prph(struct iwl_trans *trans, u32 ofs);
+void __iwl_write_prph(struct iwl_trans *trans, u32 ofs, u32 val);
 void iwl_write_prph(struct iwl_trans *trans, u32 ofs, u32 val);
 int iwl_poll_prph_bit(struct iwl_trans *trans, u32 addr,
 		      u32 bits, u32 mask, int timeout);
diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h
index 9c90186d1744..5f657c501406 100644
--- a/drivers/net/wireless/iwlwifi/iwl-prph.h
+++ b/drivers/net/wireless/iwlwifi/iwl-prph.h
@@ -95,7 +95,8 @@
 #define APMG_SVR_VOLTAGE_CONFIG_BIT_MSK	(0x000001E0) /* bit 8:5 */
 #define APMG_SVR_DIGITAL_VOLTAGE_1_32		(0x00000060)
 
-#define APMG_PCIDEV_STT_VAL_L1_ACT_DIS		(0x00000800)
+#define APMG_PCIDEV_STT_VAL_PERSIST_DIS	(0x00000200)
+#define APMG_PCIDEV_STT_VAL_L1_ACT_DIS	(0x00000800)
 
 #define APMG_RTC_INT_STT_RFKILL		(0x10000000)
 
@@ -105,6 +106,26 @@
 /* Device NMI register */
 #define DEVICE_SET_NMI_REG 0x00a01c30
 
+/* Shared registers (0x0..0x3ff, via target indirect or periphery */
+#define SHR_BASE	0x00a10000
+
+/* Shared GP1 register */
+#define SHR_APMG_GP1_REG		0x01dc
+#define SHR_APMG_GP1_REG_PRPH		(SHR_BASE + SHR_APMG_GP1_REG)
+#define SHR_APMG_GP1_WF_XTAL_LP_EN	0x00000004
+#define SHR_APMG_GP1_CHICKEN_BIT_SELECT	0x80000000
+
+/* Shared DL_CFG register */
+#define SHR_APMG_DL_CFG_REG			0x01c4
+#define SHR_APMG_DL_CFG_REG_PRPH		(SHR_BASE + SHR_APMG_DL_CFG_REG)
+#define SHR_APMG_DL_CFG_RTCS_CLK_SELECTOR_MSK	0x000000c0
+#define SHR_APMG_DL_CFG_RTCS_CLK_INTERNAL_XTAL	0x00000080
+#define SHR_APMG_DL_CFG_DL_CLOCK_POWER_UP	0x00000100
+
+/* Shared APMG_XTAL_CFG register */
+#define SHR_APMG_XTAL_CFG_REG		0x1c0
+#define SHR_APMG_XTAL_CFG_XTAL_ON_REQ	0x80000000
+
 /*
  * Device reset for family 8000
  * write to bit 24 in order to reset the CPU
diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c
index 84d471299e5a..32a5a9a20811 100644
--- a/drivers/net/wireless/iwlwifi/pcie/trans.c
+++ b/drivers/net/wireless/iwlwifi/pcie/trans.c
@@ -75,6 +75,20 @@
 #include "iwl-agn-hw.h"
 #include "internal.h"
 
+static u32 iwl_trans_pcie_read_shr(struct iwl_trans *trans, u32 reg)
+{
+	iwl_write32(trans, HEEP_CTRL_WRD_PCIEX_CTRL_REG,
+		    ((reg & 0x0000ffff) | (2 << 28)));
+	return iwl_read32(trans, HEEP_CTRL_WRD_PCIEX_DATA_REG);
+}
+
+static void iwl_trans_pcie_write_shr(struct iwl_trans *trans, u32 reg, u32 val)
+{
+	iwl_write32(trans, HEEP_CTRL_WRD_PCIEX_DATA_REG, val);
+	iwl_write32(trans, HEEP_CTRL_WRD_PCIEX_CTRL_REG,
+		    ((reg & 0x0000ffff) | (3 << 28)));
+}
+
 static void iwl_pcie_set_pwr(struct iwl_trans *trans, bool vaux)
 {
 	if (vaux && pci_pme_capable(to_pci_dev(trans->dev), PCI_D3cold))
@@ -229,6 +243,116 @@ out:
 	return ret;
 }
 
+/*
+ * Enable LP XTAL to avoid HW bug where device may consume much power if
+ * FW is not loaded after device reset. LP XTAL is disabled by default
+ * after device HW reset. Do it only if XTAL is fed by internal source.
+ * Configure device's "persistence" mode to avoid resetting XTAL again when
+ * SHRD_HW_RST occurs in S3.
+ */
+static void iwl_pcie_apm_lp_xtal_enable(struct iwl_trans *trans)
+{
+	int ret;
+	u32 apmg_gp1_reg;
+	u32 apmg_xtal_cfg_reg;
+	u32 dl_cfg_reg;
+
+	/* Force XTAL ON */
+	__iwl_trans_pcie_set_bit(trans, CSR_GP_CNTRL,
+				 CSR_GP_CNTRL_REG_FLAG_XTAL_ON);
+
+	/* Reset entire device - do controller reset (results in SHRD_HW_RST) */
+	iwl_set_bit(trans, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
+
+	udelay(10);
+
+	/*
+	 * Set "initialization complete" bit to move adapter from
+	 * D0U* --> D0A* (powered-up active) state.
+	 */
+	iwl_set_bit(trans, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
+
+	/*
+	 * Wait for clock stabilization; once stabilized, access to
+	 * device-internal resources is possible.
+	 */
+	ret = iwl_poll_bit(trans, CSR_GP_CNTRL,
+			   CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
+			   CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
+			   25000);
+	if (WARN_ON(ret < 0)) {
+		IWL_ERR(trans, "Access time out - failed to enable LP XTAL\n");
+		/* Release XTAL ON request */
+		__iwl_trans_pcie_clear_bit(trans, CSR_GP_CNTRL,
+					   CSR_GP_CNTRL_REG_FLAG_XTAL_ON);
+		return;
+	}
+
+	/*
+	 * Clear "disable persistence" to avoid LP XTAL resetting when
+	 * SHRD_HW_RST is applied in S3.
+	 */
+	iwl_clear_bits_prph(trans, APMG_PCIDEV_STT_REG,
+				    APMG_PCIDEV_STT_VAL_PERSIST_DIS);
+
+	/*
+	 * Force APMG XTAL to be active to prevent its disabling by HW
+	 * caused by APMG idle state.
+	 */
+	apmg_xtal_cfg_reg = iwl_trans_pcie_read_shr(trans,
+						    SHR_APMG_XTAL_CFG_REG);
+	iwl_trans_pcie_write_shr(trans, SHR_APMG_XTAL_CFG_REG,
+				 apmg_xtal_cfg_reg |
+				 SHR_APMG_XTAL_CFG_XTAL_ON_REQ);
+
+	/*
+	 * Reset entire device again - do controller reset (results in
+	 * SHRD_HW_RST). Turn MAC off before proceeding.
+	 */
+	iwl_set_bit(trans, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
+
+	udelay(10);
+
+	/* Enable LP XTAL by indirect access through CSR */
+	apmg_gp1_reg = iwl_trans_pcie_read_shr(trans, SHR_APMG_GP1_REG);
+	iwl_trans_pcie_write_shr(trans, SHR_APMG_GP1_REG, apmg_gp1_reg |
+				 SHR_APMG_GP1_WF_XTAL_LP_EN |
+				 SHR_APMG_GP1_CHICKEN_BIT_SELECT);
+
+	/* Clear delay line clock power up */
+	dl_cfg_reg = iwl_trans_pcie_read_shr(trans, SHR_APMG_DL_CFG_REG);
+	iwl_trans_pcie_write_shr(trans, SHR_APMG_DL_CFG_REG, dl_cfg_reg &
+				 ~SHR_APMG_DL_CFG_DL_CLOCK_POWER_UP);
+
+	/*
+	 * Enable persistence mode to avoid LP XTAL resetting when
+	 * SHRD_HW_RST is applied in S3.
+	 */
+	iwl_set_bit(trans, CSR_HW_IF_CONFIG_REG,
+		    CSR_HW_IF_CONFIG_REG_PERSIST_MODE);
+
+	/*
+	 * Clear "initialization complete" bit to move adapter from
+	 * D0A* (powered-up Active) --> D0U* (Uninitialized) state.
+	 */
+	iwl_clear_bit(trans, CSR_GP_CNTRL,
+		      CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
+
+	/* Activates XTAL resources monitor */
+	__iwl_trans_pcie_set_bit(trans, CSR_MONITOR_CFG_REG,
+				 CSR_MONITOR_XTAL_RESOURCES);
+
+	/* Release XTAL ON request */
+	__iwl_trans_pcie_clear_bit(trans, CSR_GP_CNTRL,
+				   CSR_GP_CNTRL_REG_FLAG_XTAL_ON);
+	udelay(10);
+
+	/* Release APMG XTAL */
+	iwl_trans_pcie_write_shr(trans, SHR_APMG_XTAL_CFG_REG,
+				 apmg_xtal_cfg_reg &
+				 ~SHR_APMG_XTAL_CFG_XTAL_ON_REQ);
+}
+
 static int iwl_pcie_apm_stop_master(struct iwl_trans *trans)
 {
 	int ret = 0;
@@ -256,6 +380,11 @@ static void iwl_pcie_apm_stop(struct iwl_trans *trans)
 	/* Stop device's DMA activity */
 	iwl_pcie_apm_stop_master(trans);
 
+	if (trans->cfg->lp_xtal_workaround) {
+		iwl_pcie_apm_lp_xtal_enable(trans);
+		return;
+	}
+
 	/* Reset the entire device */
 	iwl_set_bit(trans, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
 
@@ -1208,6 +1337,7 @@ static const char *get_csr_string(int cmd)
 	IWL_CMD(CSR_GIO_CHICKEN_BITS);
 	IWL_CMD(CSR_ANA_PLL_CFG);
 	IWL_CMD(CSR_HW_REV_WA_REG);
+	IWL_CMD(CSR_MONITOR_STATUS_REG);
 	IWL_CMD(CSR_DBG_HPET_MEM_REG);
 	default:
 		return "UNKNOWN";
@@ -1240,6 +1370,7 @@ void iwl_pcie_dump_csr(struct iwl_trans *trans)
 		CSR_DRAM_INT_TBL_REG,
 		CSR_GIO_CHICKEN_BITS,
 		CSR_ANA_PLL_CFG,
+		CSR_MONITOR_STATUS_REG,
 		CSR_HW_REV_WA_REG,
 		CSR_DBG_HPET_MEM_REG
 	};
-- 
cgit v1.2.2


From 14cfca7152ae5d10b15baf01c7fd60f0f0871062 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Tue, 25 Feb 2014 20:50:53 +0100
Subject: iwlwifi: return whether to stop from rfkill method

When indicating RF-kill toggle to the higher layer, that
may in turn call back to the transport (for MVM at least)
to turn off the device quickly. Instead of that, allow it
to return whether or not the device should be turned off,
this gets rid of the call indirection and will help make
the API more consistent when we go back to non-threaded
interrupts again for PCIe.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/dvm/main.c      |  4 +++-
 drivers/net/wireless/iwlwifi/iwl-op-mode.h   | 11 ++++++-----
 drivers/net/wireless/iwlwifi/mvm/ops.c       |  6 +++---
 drivers/net/wireless/iwlwifi/pcie/drv.c      |  2 +-
 drivers/net/wireless/iwlwifi/pcie/internal.h |  2 ++
 drivers/net/wireless/iwlwifi/pcie/rx.c       |  2 +-
 drivers/net/wireless/iwlwifi/pcie/trans.c    | 12 +++++++++---
 7 files changed, 25 insertions(+), 14 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/dvm/main.c b/drivers/net/wireless/iwlwifi/dvm/main.c
index ba1b1ea54252..4a5cacce143e 100644
--- a/drivers/net/wireless/iwlwifi/dvm/main.c
+++ b/drivers/net/wireless/iwlwifi/dvm/main.c
@@ -2035,7 +2035,7 @@ static void iwl_free_skb(struct iwl_op_mode *op_mode, struct sk_buff *skb)
 	ieee80211_free_txskb(priv->hw, skb);
 }
 
-static void iwl_set_hw_rfkill_state(struct iwl_op_mode *op_mode, bool state)
+static bool iwl_set_hw_rfkill_state(struct iwl_op_mode *op_mode, bool state)
 {
 	struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode);
 
@@ -2045,6 +2045,8 @@ static void iwl_set_hw_rfkill_state(struct iwl_op_mode *op_mode, bool state)
 		clear_bit(STATUS_RF_KILL_HW, &priv->status);
 
 	wiphy_rfkill_set_hw_state(priv->hw->wiphy, state);
+
+	return false;
 }
 
 static const struct iwl_op_mode_ops iwl_dvm_ops = {
diff --git a/drivers/net/wireless/iwlwifi/iwl-op-mode.h b/drivers/net/wireless/iwlwifi/iwl-op-mode.h
index 5d78207040b0..ea29504ac617 100644
--- a/drivers/net/wireless/iwlwifi/iwl-op-mode.h
+++ b/drivers/net/wireless/iwlwifi/iwl-op-mode.h
@@ -119,7 +119,8 @@ struct iwl_cfg;
  * @queue_not_full: notifies that a HW queue is not full any more.
  *	Must be atomic and called with BH disabled.
  * @hw_rf_kill:notifies of a change in the HW rf kill switch. True means that
- *	the radio is killed. May sleep.
+ *	the radio is killed. Return %true if the device should be stopped by
+ *	the transport immediately after the call. May sleep.
  * @free_skb: allows the transport layer to free skbs that haven't been
  *	reclaimed by the op_mode. This can happen when the driver is freed and
  *	there are Tx packets pending in the transport layer.
@@ -144,7 +145,7 @@ struct iwl_op_mode_ops {
 		  struct iwl_device_cmd *cmd);
 	void (*queue_full)(struct iwl_op_mode *op_mode, int queue);
 	void (*queue_not_full)(struct iwl_op_mode *op_mode, int queue);
-	void (*hw_rf_kill)(struct iwl_op_mode *op_mode, bool state);
+	bool (*hw_rf_kill)(struct iwl_op_mode *op_mode, bool state);
 	void (*free_skb)(struct iwl_op_mode *op_mode, struct sk_buff *skb);
 	void (*nic_error)(struct iwl_op_mode *op_mode);
 	void (*cmd_queue_full)(struct iwl_op_mode *op_mode);
@@ -195,11 +196,11 @@ static inline void iwl_op_mode_queue_not_full(struct iwl_op_mode *op_mode,
 	op_mode->ops->queue_not_full(op_mode, queue);
 }
 
-static inline void iwl_op_mode_hw_rf_kill(struct iwl_op_mode *op_mode,
-					  bool state)
+static inline bool __must_check
+iwl_op_mode_hw_rf_kill(struct iwl_op_mode *op_mode, bool state)
 {
 	might_sleep();
-	op_mode->ops->hw_rf_kill(op_mode, state);
+	return op_mode->ops->hw_rf_kill(op_mode, state);
 }
 
 static inline void iwl_op_mode_free_skb(struct iwl_op_mode *op_mode,
diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c
index ae347fb16a5d..05f635572063 100644
--- a/drivers/net/wireless/iwlwifi/mvm/ops.c
+++ b/drivers/net/wireless/iwlwifi/mvm/ops.c
@@ -690,7 +690,7 @@ void iwl_mvm_set_hw_ctkill_state(struct iwl_mvm *mvm, bool state)
 	wiphy_rfkill_set_hw_state(mvm->hw->wiphy, iwl_mvm_is_radio_killed(mvm));
 }
 
-static void iwl_mvm_set_hw_rfkill_state(struct iwl_op_mode *op_mode, bool state)
+static bool iwl_mvm_set_hw_rfkill_state(struct iwl_op_mode *op_mode, bool state)
 {
 	struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode);
 
@@ -699,9 +699,9 @@ static void iwl_mvm_set_hw_rfkill_state(struct iwl_op_mode *op_mode, bool state)
 	else
 		clear_bit(IWL_MVM_STATUS_HW_RFKILL, &mvm->status);
 
-	if (state && mvm->cur_ucode != IWL_UCODE_INIT)
-		iwl_trans_stop_device(mvm->trans);
 	wiphy_rfkill_set_hw_state(mvm->hw->wiphy, iwl_mvm_is_radio_killed(mvm));
+
+	return state && mvm->cur_ucode != IWL_UCODE_INIT;
 }
 
 static void iwl_mvm_free_skb(struct iwl_op_mode *op_mode, struct sk_buff *skb)
diff --git a/drivers/net/wireless/iwlwifi/pcie/drv.c b/drivers/net/wireless/iwlwifi/pcie/drv.c
index 22b6b7ee5fd2..e530055019ce 100644
--- a/drivers/net/wireless/iwlwifi/pcie/drv.c
+++ b/drivers/net/wireless/iwlwifi/pcie/drv.c
@@ -561,7 +561,7 @@ static int iwl_pci_resume(struct device *device)
 	iwl_enable_rfkill_int(trans);
 
 	hw_rfkill = iwl_is_rfkill_set(trans);
-	iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill);
+	iwl_trans_pcie_rf_kill(trans, hw_rfkill);
 
 	return 0;
 }
diff --git a/drivers/net/wireless/iwlwifi/pcie/internal.h b/drivers/net/wireless/iwlwifi/pcie/internal.h
index 3120bc5bb12d..9091513ea738 100644
--- a/drivers/net/wireless/iwlwifi/pcie/internal.h
+++ b/drivers/net/wireless/iwlwifi/pcie/internal.h
@@ -488,4 +488,6 @@ static inline void __iwl_trans_pcie_set_bit(struct iwl_trans *trans,
 	__iwl_trans_pcie_set_bits_mask(trans, reg, mask, mask);
 }
 
+void iwl_trans_pcie_rf_kill(struct iwl_trans *trans, bool state);
+
 #endif /* __iwl_trans_int_pcie_h__ */
diff --git a/drivers/net/wireless/iwlwifi/pcie/rx.c b/drivers/net/wireless/iwlwifi/pcie/rx.c
index cf49f6ce0ff8..fdfa3969cac9 100644
--- a/drivers/net/wireless/iwlwifi/pcie/rx.c
+++ b/drivers/net/wireless/iwlwifi/pcie/rx.c
@@ -994,7 +994,7 @@ irqreturn_t iwl_pcie_irq_handler(int irq, void *dev_id)
 
 		isr_stats->rfkill++;
 
-		iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill);
+		iwl_trans_pcie_rf_kill(trans, hw_rfkill);
 		if (hw_rfkill) {
 			set_bit(STATUS_RFKILL, &trans->status);
 			if (test_and_clear_bit(STATUS_SYNC_HCMD_ACTIVE,
diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c
index 32a5a9a20811..dcfd6d866d09 100644
--- a/drivers/net/wireless/iwlwifi/pcie/trans.c
+++ b/drivers/net/wireless/iwlwifi/pcie/trans.c
@@ -770,7 +770,7 @@ static int iwl_trans_pcie_start_fw(struct iwl_trans *trans,
 		set_bit(STATUS_RFKILL, &trans->status);
 	else
 		clear_bit(STATUS_RFKILL, &trans->status);
-	iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill);
+	iwl_trans_pcie_rf_kill(trans, hw_rfkill);
 	if (hw_rfkill && !run_in_rfkill)
 		return -ERFKILL;
 
@@ -885,7 +885,13 @@ static void iwl_trans_pcie_stop_device(struct iwl_trans *trans)
 	else
 		clear_bit(STATUS_RFKILL, &trans->status);
 	if (hw_rfkill != was_hw_rfkill)
-		iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill);
+		iwl_trans_pcie_rf_kill(trans, hw_rfkill);
+}
+
+void iwl_trans_pcie_rf_kill(struct iwl_trans *trans, bool state)
+{
+	if (iwl_op_mode_hw_rf_kill(trans->op_mode, state))
+		iwl_trans_pcie_stop_device(trans);
 }
 
 static void iwl_trans_pcie_d3_suspend(struct iwl_trans *trans, bool test)
@@ -994,7 +1000,7 @@ static int iwl_trans_pcie_start_hw(struct iwl_trans *trans)
 		set_bit(STATUS_RFKILL, &trans->status);
 	else
 		clear_bit(STATUS_RFKILL, &trans->status);
-	iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill);
+	iwl_trans_pcie_rf_kill(trans, hw_rfkill);
 
 	return 0;
 }
-- 
cgit v1.2.2


From 660925371b9c0545ab41a65d38b47e98e16c1757 Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Thu, 20 Feb 2014 14:58:30 +0200
Subject: iwlwifi: mvm: fix scan offload for BGN SKU

BGN SKU won't scan on 5.2GHz obviously, but the firmware
still expects the driver to reserve space for the the probe
request for the 5.2GHz band.
Fix this by allocating space and leave it empty.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=69541

Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/scan.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c
index 713efd71efe2..b4c9fb649976 100644
--- a/drivers/net/wireless/iwlwifi/mvm/scan.c
+++ b/drivers/net/wireless/iwlwifi/mvm/scan.c
@@ -709,7 +709,6 @@ int iwl_mvm_config_sched_scan(struct iwl_mvm *mvm,
 			      struct cfg80211_sched_scan_request *req,
 			      struct ieee80211_sched_scan_ies *ies)
 {
-	int supported_bands = 0;
 	int band_2ghz = mvm->nvm_data->bands[IEEE80211_BAND_2GHZ].n_channels;
 	int band_5ghz = mvm->nvm_data->bands[IEEE80211_BAND_5GHZ].n_channels;
 	int head = 0;
@@ -726,13 +725,8 @@ int iwl_mvm_config_sched_scan(struct iwl_mvm *mvm,
 
 	lockdep_assert_held(&mvm->mutex);
 
-	if (band_2ghz)
-		supported_bands++;
-	if (band_5ghz)
-		supported_bands++;
-
 	cmd_len = sizeof(struct iwl_scan_offload_cfg) +
-				supported_bands * SCAN_OFFLOAD_PROBE_REQ_SIZE;
+		  2 * SCAN_OFFLOAD_PROBE_REQ_SIZE;
 
 	scan_cfg = kzalloc(cmd_len, GFP_KERNEL);
 	if (!scan_cfg)
-- 
cgit v1.2.2


From 7bb426ea36f143459895de0cf11f0f0a7cfa396a Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Mon, 24 Feb 2014 12:54:37 +0200
Subject: iwlwifi: mvm: check for d0i3 fw capability

Check for both cfg->d0i3 and fw d0i3 support in order
to enable d0i3 support.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-fw.h       | 8 ++++++++
 drivers/net/wireless/iwlwifi/mvm/mac80211.c | 6 +++---
 drivers/net/wireless/iwlwifi/mvm/mvm.h      | 6 ++++++
 3 files changed, 17 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-fw.h b/drivers/net/wireless/iwlwifi/iwl-fw.h
index f04ff871dc6d..18f867c4df55 100644
--- a/drivers/net/wireless/iwlwifi/iwl-fw.h
+++ b/drivers/net/wireless/iwlwifi/iwl-fw.h
@@ -125,6 +125,14 @@ enum iwl_ucode_tlv_flag {
 	IWL_UCODE_TLV_FLAGS_GO_UAPSD		= BIT(30),
 };
 
+/**
+ * enum iwl_ucode_tlv_capa - ucode capabilities
+ * @IWL_UCODE_TLV_CAPA_D0I3_SUPPORT: supports D0i3
+ */
+enum iwl_ucode_tlv_capa {
+	IWL_UCODE_TLV_CAPA_D0I3_SUPPORT		= BIT(0),
+};
+
 /* The default calibrate table size if not specified by firmware file */
 #define IWL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE	18
 #define IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE		19
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index d74cc43ca593..41b9e65f6a3f 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -205,7 +205,7 @@ static const struct iwl_fw_bcast_filter iwl_mvm_default_bcast_filters[] = {
 
 void iwl_mvm_ref(struct iwl_mvm *mvm, enum iwl_mvm_ref_type ref_type)
 {
-	if (!mvm->trans->cfg->d0i3)
+	if (!iwl_mvm_is_d0i3_supported(mvm))
 		return;
 
 	IWL_DEBUG_RPM(mvm, "Take mvm reference - type %d\n", ref_type);
@@ -215,7 +215,7 @@ void iwl_mvm_ref(struct iwl_mvm *mvm, enum iwl_mvm_ref_type ref_type)
 
 void iwl_mvm_unref(struct iwl_mvm *mvm, enum iwl_mvm_ref_type ref_type)
 {
-	if (!mvm->trans->cfg->d0i3)
+	if (!iwl_mvm_is_d0i3_supported(mvm))
 		return;
 
 	IWL_DEBUG_RPM(mvm, "Leave mvm reference - type %d\n", ref_type);
@@ -228,7 +228,7 @@ iwl_mvm_unref_all_except(struct iwl_mvm *mvm, enum iwl_mvm_ref_type ref)
 {
 	int i;
 
-	if (!mvm->trans->cfg->d0i3)
+	if (!iwl_mvm_is_d0i3_supported(mvm))
 		return;
 
 	for_each_set_bit(i, mvm->ref_bitmap, IWL_MVM_REF_COUNT) {
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index 5fb51099f99d..3511bf79abcd 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -656,6 +656,12 @@ iwl_mvm_sta_from_staid_protected(struct iwl_mvm *mvm, u8 sta_id)
 	return iwl_mvm_sta_from_mac80211(sta);
 }
 
+static inline bool iwl_mvm_is_d0i3_supported(struct iwl_mvm *mvm)
+{
+	return mvm->trans->cfg->d0i3 &&
+	       (mvm->fw->ucode_capa.capa[0] & IWL_UCODE_TLV_CAPA_D0I3_SUPPORT);
+}
+
 extern const u8 iwl_mvm_ac_to_tx_fifo[];
 
 struct iwl_rate_info {
-- 
cgit v1.2.2


From 33ea27f66afa9ca3e130bd00c595dca509152fd7 Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Mon, 10 Feb 2014 15:34:29 +0200
Subject: iwlwifi: mvm: wait for stop sched-scan completion

cfg80211 assumes a scheduled scan is stopped synchronously. Wait for the
FW before returning to caller.

Don't do anything in the async handler in the stop-from-above flow.
There's no need to call the mac80211 sched-scan completion as the
cleanup will be automatic. Make sure the async handler is called before
the next incoming scan changes the scan_status by flushing the async
handlers after all invocations.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/mac80211.c | 24 +++++------------
 drivers/net/wireless/iwlwifi/mvm/mvm.h      |  7 ++++-
 drivers/net/wireless/iwlwifi/mvm/scan.c     | 42 ++++++++++++++++++++++-------
 3 files changed, 46 insertions(+), 27 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index 41b9e65f6a3f..fff66ab2cfda 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -1419,8 +1419,6 @@ static int iwl_mvm_mac_hw_scan(struct ieee80211_hw *hw,
 			       struct cfg80211_scan_request *req)
 {
 	struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw);
-	struct iwl_notification_wait wait_scan_done;
-	static const u8 scan_done_notif[] = { SCAN_OFFLOAD_COMPLETE, };
 	int ret;
 
 	if (req->n_channels == 0 || req->n_channels > MAX_NUM_SCAN_CHANNELS)
@@ -1430,22 +1428,11 @@ static int iwl_mvm_mac_hw_scan(struct ieee80211_hw *hw,
 
 	switch (mvm->scan_status) {
 	case IWL_MVM_SCAN_SCHED:
-		iwl_init_notification_wait(&mvm->notif_wait, &wait_scan_done,
-					   scan_done_notif,
-					   ARRAY_SIZE(scan_done_notif),
-					   NULL, NULL);
-		iwl_mvm_sched_scan_stop(mvm);
-		ret = iwl_wait_notification(&mvm->notif_wait,
-					    &wait_scan_done, HZ);
+		ret = iwl_mvm_sched_scan_stop(mvm);
 		if (ret) {
 			ret = -EBUSY;
 			goto out;
 		}
-		/* iwl_mvm_rx_scan_offload_complete_notif() will be called
-		 * soon but will not reset the scan status as it won't be
-		 * IWL_MVM_SCAN_SCHED any more since we queue the next scan
-		 * immediately (below)
-		 */
 		break;
 	case IWL_MVM_SCAN_NONE:
 		break;
@@ -1461,7 +1448,8 @@ static int iwl_mvm_mac_hw_scan(struct ieee80211_hw *hw,
 		iwl_mvm_unref(mvm, IWL_MVM_REF_SCAN);
 out:
 	mutex_unlock(&mvm->mutex);
-
+	/* make sure to flush the Rx handler before the next scan arrives */
+	iwl_mvm_wait_for_async_handlers(mvm);
 	return ret;
 }
 
@@ -1751,12 +1739,14 @@ static int iwl_mvm_mac_sched_scan_stop(struct ieee80211_hw *hw,
 				       struct ieee80211_vif *vif)
 {
 	struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw);
+	int ret;
 
 	mutex_lock(&mvm->mutex);
-	iwl_mvm_sched_scan_stop(mvm);
+	ret = iwl_mvm_sched_scan_stop(mvm);
 	mutex_unlock(&mvm->mutex);
+	iwl_mvm_wait_for_async_handlers(mvm);
 
-	return 0;
+	return ret;
 }
 
 static int iwl_mvm_mac_set_key(struct ieee80211_hw *hw,
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index 3511bf79abcd..4da53c395ad3 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -712,6 +712,11 @@ static inline const char *iwl_mvm_get_tx_fail_reason(u32 status) { return ""; }
 int iwl_mvm_flush_tx_path(struct iwl_mvm *mvm, u32 tfd_msk, bool sync);
 void iwl_mvm_async_handlers_purge(struct iwl_mvm *mvm);
 
+static inline void iwl_mvm_wait_for_async_handlers(struct iwl_mvm *mvm)
+{
+	flush_work(&mvm->async_handlers_wk);
+}
+
 /* Statistics */
 int iwl_mvm_rx_reply_statistics(struct iwl_mvm *mvm,
 				struct iwl_rx_cmd_buffer *rxb,
@@ -813,7 +818,7 @@ int iwl_mvm_config_sched_scan_profiles(struct iwl_mvm *mvm,
 				       struct cfg80211_sched_scan_request *req);
 int iwl_mvm_sched_scan_start(struct iwl_mvm *mvm,
 			     struct cfg80211_sched_scan_request *req);
-void iwl_mvm_sched_scan_stop(struct iwl_mvm *mvm);
+int iwl_mvm_sched_scan_stop(struct iwl_mvm *mvm);
 int iwl_mvm_rx_sched_scan_results(struct iwl_mvm *mvm,
 				  struct iwl_rx_cmd_buffer *rxb,
 				  struct iwl_device_cmd *cmd);
diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c
index b4c9fb649976..a2cd54b57e67 100644
--- a/drivers/net/wireless/iwlwifi/mvm/scan.c
+++ b/drivers/net/wireless/iwlwifi/mvm/scan.c
@@ -519,10 +519,11 @@ int iwl_mvm_rx_scan_offload_complete_notif(struct iwl_mvm *mvm,
 		       scan_notif->status == IWL_SCAN_OFFLOAD_COMPLETED ?
 		       "completed" : "aborted");
 
-	/* might already be something else again, don't reset if so */
-	if (mvm->scan_status == IWL_MVM_SCAN_SCHED)
+	/* only call mac80211 completion if the stop was initiated by FW */
+	if (mvm->scan_status == IWL_MVM_SCAN_SCHED) {
 		mvm->scan_status = IWL_MVM_SCAN_NONE;
-	ieee80211_sched_scan_stopped(mvm->hw);
+		ieee80211_sched_scan_stopped(mvm->hw);
+	}
 
 	return 0;
 }
@@ -894,26 +895,49 @@ static int iwl_mvm_send_sched_scan_abort(struct iwl_mvm *mvm)
 		 * microcode has notified us that a scan is completed.
 		 */
 		IWL_DEBUG_SCAN(mvm, "SCAN OFFLOAD ABORT ret %d.\n", status);
-		ret = -EIO;
+		ret = -ENOENT;
 	}
 
 	return ret;
 }
 
-void iwl_mvm_sched_scan_stop(struct iwl_mvm *mvm)
+int iwl_mvm_sched_scan_stop(struct iwl_mvm *mvm)
 {
 	int ret;
+	struct iwl_notification_wait wait_scan_done;
+	static const u8 scan_done_notif[] = { SCAN_OFFLOAD_COMPLETE, };
 
 	lockdep_assert_held(&mvm->mutex);
 
 	if (mvm->scan_status != IWL_MVM_SCAN_SCHED) {
 		IWL_DEBUG_SCAN(mvm, "No offloaded scan to stop\n");
-		return;
+		return 0;
 	}
 
+	iwl_init_notification_wait(&mvm->notif_wait, &wait_scan_done,
+				   scan_done_notif,
+				   ARRAY_SIZE(scan_done_notif),
+				   NULL, NULL);
+
 	ret = iwl_mvm_send_sched_scan_abort(mvm);
-	if (ret)
+	if (ret) {
 		IWL_DEBUG_SCAN(mvm, "Send stop offload scan failed %d\n", ret);
-	else
-		IWL_DEBUG_SCAN(mvm, "Successfully sent stop offload scan\n");
+		iwl_remove_notification(&mvm->notif_wait, &wait_scan_done);
+		return ret;
+	}
+
+	IWL_DEBUG_SCAN(mvm, "Successfully sent stop offload scan\n");
+
+	ret = iwl_wait_notification(&mvm->notif_wait, &wait_scan_done, 1 * HZ);
+	if (ret)
+		return ret;
+
+	/*
+	 * Clear the scan status so the next scan requests will succeed. This
+	 * also ensures the Rx handler doesn't do anything, as the scan was
+	 * stopped from above.
+	 */
+	mvm->scan_status = IWL_MVM_SCAN_NONE;
+
+	return 0;
 }
-- 
cgit v1.2.2


From 91b80256b6ef64c3ec21210f7b4a0256c2c47f64 Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Mon, 10 Feb 2014 12:49:39 +0200
Subject: iwlwifi: mvm: abort scan on sched_scan request

A scheduled scan is a more persistent setting and should take priority
over temporary regular scans. Abort the regular when a sched_scan
request arrives and then request the sched_scan.

The kernel API allows sending a sched_scan without canceling a regular
scan in progress, so this is our way to abstract the FW's limitations.

Make the scan-cancel Rx handler async and flush after invocation to
ensure new scans can't creep in before it.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/mac80211.c | 25 ++++++++++++++++++++++---
 drivers/net/wireless/iwlwifi/mvm/mvm.h      |  2 +-
 drivers/net/wireless/iwlwifi/mvm/ops.c      |  2 +-
 drivers/net/wireless/iwlwifi/mvm/scan.c     | 18 +++++++++---------
 4 files changed, 33 insertions(+), 14 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index fff66ab2cfda..a6df00d675b7 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -1708,9 +1708,26 @@ static int iwl_mvm_mac_sched_scan_start(struct ieee80211_hw *hw,
 
 	mutex_lock(&mvm->mutex);
 
-	if (mvm->scan_status != IWL_MVM_SCAN_NONE) {
-		IWL_DEBUG_SCAN(mvm,
-			       "SCHED SCAN request during internal scan - abort\n");
+	switch (mvm->scan_status) {
+	case IWL_MVM_SCAN_OS:
+		IWL_DEBUG_SCAN(mvm, "Stopping previous scan for sched_scan\n");
+		ret = iwl_mvm_cancel_scan(mvm);
+		if (ret) {
+			ret = -EBUSY;
+			goto out;
+		}
+
+		/*
+		 * iwl_mvm_rx_scan_complete() will be called soon but will
+		 * not reset the scan status as it won't be IWL_MVM_SCAN_OS
+		 * any more since we queue the next scan immediately (below).
+		 * We make sure it is called before the next scan starts by
+		 * flushing the async-handlers work.
+		 */
+		break;
+	case IWL_MVM_SCAN_NONE:
+		break;
+	default:
 		ret = -EBUSY;
 		goto out;
 	}
@@ -1732,6 +1749,8 @@ err:
 	mvm->scan_status = IWL_MVM_SCAN_NONE;
 out:
 	mutex_unlock(&mvm->mutex);
+	/* make sure to flush the Rx handler before the next scan arrives */
+	iwl_mvm_wait_for_async_handlers(mvm);
 	return ret;
 }
 
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index 4da53c395ad3..e5c1db97acf4 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -804,7 +804,7 @@ int iwl_mvm_rx_scan_response(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb,
 			     struct iwl_device_cmd *cmd);
 int iwl_mvm_rx_scan_complete(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb,
 			     struct iwl_device_cmd *cmd);
-void iwl_mvm_cancel_scan(struct iwl_mvm *mvm);
+int iwl_mvm_cancel_scan(struct iwl_mvm *mvm);
 
 /* Scheduled scan */
 int iwl_mvm_rx_scan_offload_complete_notif(struct iwl_mvm *mvm,
diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c
index 05f635572063..39279e1d6ad4 100644
--- a/drivers/net/wireless/iwlwifi/mvm/ops.c
+++ b/drivers/net/wireless/iwlwifi/mvm/ops.c
@@ -226,7 +226,7 @@ static const struct iwl_rx_handlers iwl_mvm_rx_handlers[] = {
 	RX_HANDLER(EOSP_NOTIFICATION, iwl_mvm_rx_eosp_notif, false),
 
 	RX_HANDLER(SCAN_REQUEST_CMD, iwl_mvm_rx_scan_response, false),
-	RX_HANDLER(SCAN_COMPLETE_NOTIFICATION, iwl_mvm_rx_scan_complete, false),
+	RX_HANDLER(SCAN_COMPLETE_NOTIFICATION, iwl_mvm_rx_scan_complete, true),
 	RX_HANDLER(SCAN_OFFLOAD_COMPLETE,
 		   iwl_mvm_rx_scan_offload_complete_notif, true),
 	RX_HANDLER(MATCH_FOUND_NOTIFICATION, iwl_mvm_rx_sched_scan_results,
diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c
index a2cd54b57e67..945398ba39b4 100644
--- a/drivers/net/wireless/iwlwifi/mvm/scan.c
+++ b/drivers/net/wireless/iwlwifi/mvm/scan.c
@@ -402,10 +402,13 @@ int iwl_mvm_rx_scan_complete(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb,
 	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	struct iwl_scan_complete_notif *notif = (void *)pkt->data;
 
+	lockdep_assert_held(&mvm->mutex);
+
 	IWL_DEBUG_SCAN(mvm, "Scan complete: status=0x%x scanned channels=%d\n",
 		       notif->status, notif->scanned_channels);
 
-	mvm->scan_status = IWL_MVM_SCAN_NONE;
+	if (mvm->scan_status == IWL_MVM_SCAN_OS)
+		mvm->scan_status = IWL_MVM_SCAN_NONE;
 	ieee80211_scan_completed(mvm->hw, notif->status != SCAN_COMP_STATUS_OK);
 
 	iwl_mvm_unref(mvm, IWL_MVM_REF_SCAN);
@@ -466,7 +469,7 @@ static bool iwl_mvm_scan_abort_notif(struct iwl_notif_wait_data *notif_wait,
 	};
 }
 
-void iwl_mvm_cancel_scan(struct iwl_mvm *mvm)
+int iwl_mvm_cancel_scan(struct iwl_mvm *mvm)
 {
 	struct iwl_notification_wait wait_scan_abort;
 	static const u8 scan_abort_notif[] = { SCAN_ABORT_CMD,
@@ -474,13 +477,13 @@ void iwl_mvm_cancel_scan(struct iwl_mvm *mvm)
 	int ret;
 
 	if (mvm->scan_status == IWL_MVM_SCAN_NONE)
-		return;
+		return 0;
 
 	if (iwl_mvm_is_radio_killed(mvm)) {
 		ieee80211_scan_completed(mvm->hw, true);
 		iwl_mvm_unref(mvm, IWL_MVM_REF_SCAN);
 		mvm->scan_status = IWL_MVM_SCAN_NONE;
-		return;
+		return 0;
 	}
 
 	iwl_init_notification_wait(&mvm->notif_wait, &wait_scan_abort,
@@ -495,14 +498,11 @@ void iwl_mvm_cancel_scan(struct iwl_mvm *mvm)
 		goto out_remove_notif;
 	}
 
-	ret = iwl_wait_notification(&mvm->notif_wait, &wait_scan_abort, 1 * HZ);
-	if (ret)
-		IWL_ERR(mvm, "%s - failed on timeout\n", __func__);
-
-	return;
+	return iwl_wait_notification(&mvm->notif_wait, &wait_scan_abort, HZ);
 
 out_remove_notif:
 	iwl_remove_notification(&mvm->notif_wait, &wait_scan_abort);
+	return ret;
 }
 
 int iwl_mvm_rx_scan_offload_complete_notif(struct iwl_mvm *mvm,
-- 
cgit v1.2.2


From aeb12c5ef7cb08d879af22fc0a56cab9e70689ea Mon Sep 17 00:00:00 2001
From: Claudiu Manoil <claudiu.manoil@freescale.com>
Date: Fri, 7 Mar 2014 14:42:45 +0200
Subject: gianfar: Separate out the Tx interrupt handling (Tx NAPI)

There are some concurrency issues on devices w/ 2 CPUs related
to the handling of Rx and Tx interrupts.  eTSEC has separate
interrupt lines for Rx and Tx but a single imask register
to mask these interrupts and a single NAPI instance to handle
both Rx and Tx work.  As a result, the Rx and Tx ISRs are
identical, both are invoking gfar_schedule_cleanup(), however
both handlers can be entered at the same time when the Rx and
Tx interrupts are taken by different CPUs.  In this case
spurrious interrupts (SPU) show up (in /proc/interrupts)
indicating a concurrency issue.  Also, Tx overruns followed
by Tx timeout have been observed under heavy Tx traffic load.

To address these issues, the schedule cleanup ISR part has
been changed to handle the Rx and Tx interrupts independently.
The patch adds a separate NAPI poll routine for Tx cleanup to
be triggerred independently by the Tx confirmation interrupts
only.  Existing poll functions are modified to handle only
the Rx path processing.  The Tx poll routine does not need a
budget, since Tx processing doesn't consume NAPI budget, and
hence it is registered with minimum NAPI weight.
NAPI scheduling does not require locking since there are
different NAPI instances between the Rx and Tx confirmation
paths now.
So, the patch fixes the occurence of spurrious Rx/Tx interrupts.
Tx overruns also occur less frequently now.

Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/freescale/gianfar.c | 218 ++++++++++++++++++++++---------
 drivers/net/ethernet/freescale/gianfar.h |  11 +-
 2 files changed, 160 insertions(+), 69 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index c5b9320f7629..1aa2d55aa014 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -128,8 +128,10 @@ static void free_skb_resources(struct gfar_private *priv);
 static void gfar_set_multi(struct net_device *dev);
 static void gfar_set_hash_for_addr(struct net_device *dev, u8 *addr);
 static void gfar_configure_serdes(struct net_device *dev);
-static int gfar_poll(struct napi_struct *napi, int budget);
-static int gfar_poll_sq(struct napi_struct *napi, int budget);
+static int gfar_poll_rx(struct napi_struct *napi, int budget);
+static int gfar_poll_tx(struct napi_struct *napi, int budget);
+static int gfar_poll_rx_sq(struct napi_struct *napi, int budget);
+static int gfar_poll_tx_sq(struct napi_struct *napi, int budget);
 #ifdef CONFIG_NET_POLL_CONTROLLER
 static void gfar_netpoll(struct net_device *dev);
 #endif
@@ -614,16 +616,20 @@ static void disable_napi(struct gfar_private *priv)
 {
 	int i;
 
-	for (i = 0; i < priv->num_grps; i++)
-		napi_disable(&priv->gfargrp[i].napi);
+	for (i = 0; i < priv->num_grps; i++) {
+		napi_disable(&priv->gfargrp[i].napi_rx);
+		napi_disable(&priv->gfargrp[i].napi_tx);
+	}
 }
 
 static void enable_napi(struct gfar_private *priv)
 {
 	int i;
 
-	for (i = 0; i < priv->num_grps; i++)
-		napi_enable(&priv->gfargrp[i].napi);
+	for (i = 0; i < priv->num_grps; i++) {
+		napi_enable(&priv->gfargrp[i].napi_rx);
+		napi_enable(&priv->gfargrp[i].napi_tx);
+	}
 }
 
 static int gfar_parse_group(struct device_node *np,
@@ -1257,13 +1263,19 @@ static int gfar_probe(struct platform_device *ofdev)
 	dev->ethtool_ops = &gfar_ethtool_ops;
 
 	/* Register for napi ...We are registering NAPI for each grp */
-	if (priv->mode == SQ_SG_MODE)
-		netif_napi_add(dev, &priv->gfargrp[0].napi, gfar_poll_sq,
+	if (priv->mode == SQ_SG_MODE) {
+		netif_napi_add(dev, &priv->gfargrp[0].napi_rx, gfar_poll_rx_sq,
 			       GFAR_DEV_WEIGHT);
-	else
-		for (i = 0; i < priv->num_grps; i++)
-			netif_napi_add(dev, &priv->gfargrp[i].napi, gfar_poll,
-				       GFAR_DEV_WEIGHT);
+		netif_napi_add(dev, &priv->gfargrp[0].napi_tx, gfar_poll_tx_sq,
+			       2);
+	} else {
+		for (i = 0; i < priv->num_grps; i++) {
+			netif_napi_add(dev, &priv->gfargrp[i].napi_rx,
+				       gfar_poll_rx, GFAR_DEV_WEIGHT);
+			netif_napi_add(dev, &priv->gfargrp[i].napi_tx,
+				       gfar_poll_tx, 2);
+		}
+	}
 
 	if (priv->device_flags & FSL_GIANFAR_DEV_HAS_CSUM) {
 		dev->hw_features = NETIF_F_IP_CSUM | NETIF_F_SG |
@@ -2538,31 +2550,6 @@ static void gfar_clean_tx_ring(struct gfar_priv_tx_q *tx_queue)
 	netdev_tx_completed_queue(txq, howmany, bytes_sent);
 }
 
-static void gfar_schedule_cleanup(struct gfar_priv_grp *gfargrp)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&gfargrp->grplock, flags);
-	if (napi_schedule_prep(&gfargrp->napi)) {
-		gfar_write(&gfargrp->regs->imask, IMASK_RTX_DISABLED);
-		__napi_schedule(&gfargrp->napi);
-	} else {
-		/* Clear IEVENT, so interrupts aren't called again
-		 * because of the packets that have already arrived.
-		 */
-		gfar_write(&gfargrp->regs->ievent, IEVENT_RTX_MASK);
-	}
-	spin_unlock_irqrestore(&gfargrp->grplock, flags);
-
-}
-
-/* Interrupt Handler for Transmit complete */
-static irqreturn_t gfar_transmit(int irq, void *grp_id)
-{
-	gfar_schedule_cleanup((struct gfar_priv_grp *)grp_id);
-	return IRQ_HANDLED;
-}
-
 static void gfar_new_rxbdp(struct gfar_priv_rx_q *rx_queue, struct rxbd8 *bdp,
 			   struct sk_buff *skb)
 {
@@ -2633,7 +2620,48 @@ static inline void count_errors(unsigned short status, struct net_device *dev)
 
 irqreturn_t gfar_receive(int irq, void *grp_id)
 {
-	gfar_schedule_cleanup((struct gfar_priv_grp *)grp_id);
+	struct gfar_priv_grp *grp = (struct gfar_priv_grp *)grp_id;
+	unsigned long flags;
+	u32 imask;
+
+	if (likely(napi_schedule_prep(&grp->napi_rx))) {
+		spin_lock_irqsave(&grp->grplock, flags);
+		imask = gfar_read(&grp->regs->imask);
+		imask &= IMASK_RX_DISABLED;
+		gfar_write(&grp->regs->imask, imask);
+		spin_unlock_irqrestore(&grp->grplock, flags);
+		__napi_schedule(&grp->napi_rx);
+	} else {
+		/* Clear IEVENT, so interrupts aren't called again
+		 * because of the packets that have already arrived.
+		 */
+		gfar_write(&grp->regs->ievent, IEVENT_RX_MASK);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/* Interrupt Handler for Transmit complete */
+static irqreturn_t gfar_transmit(int irq, void *grp_id)
+{
+	struct gfar_priv_grp *grp = (struct gfar_priv_grp *)grp_id;
+	unsigned long flags;
+	u32 imask;
+
+	if (likely(napi_schedule_prep(&grp->napi_tx))) {
+		spin_lock_irqsave(&grp->grplock, flags);
+		imask = gfar_read(&grp->regs->imask);
+		imask &= IMASK_TX_DISABLED;
+		gfar_write(&grp->regs->imask, imask);
+		spin_unlock_irqrestore(&grp->grplock, flags);
+		__napi_schedule(&grp->napi_tx);
+	} else {
+		/* Clear IEVENT, so interrupts aren't called again
+		 * because of the packets that have already arrived.
+		 */
+		gfar_write(&grp->regs->ievent, IEVENT_TX_MASK);
+	}
+
 	return IRQ_HANDLED;
 }
 
@@ -2757,7 +2785,7 @@ int gfar_clean_rx_ring(struct gfar_priv_rx_q *rx_queue, int rx_work_limit)
 				rx_queue->stats.rx_bytes += pkt_len;
 				skb_record_rx_queue(skb, rx_queue->qindex);
 				gfar_process_frame(dev, skb, amount_pull,
-						   &rx_queue->grp->napi);
+						   &rx_queue->grp->napi_rx);
 
 			} else {
 				netif_warn(priv, rx_err, dev, "Missing skb!\n");
@@ -2786,55 +2814,81 @@ int gfar_clean_rx_ring(struct gfar_priv_rx_q *rx_queue, int rx_work_limit)
 	return howmany;
 }
 
-static int gfar_poll_sq(struct napi_struct *napi, int budget)
+static int gfar_poll_rx_sq(struct napi_struct *napi, int budget)
 {
 	struct gfar_priv_grp *gfargrp =
-		container_of(napi, struct gfar_priv_grp, napi);
+		container_of(napi, struct gfar_priv_grp, napi_rx);
 	struct gfar __iomem *regs = gfargrp->regs;
-	struct gfar_priv_tx_q *tx_queue = gfargrp->priv->tx_queue[0];
 	struct gfar_priv_rx_q *rx_queue = gfargrp->priv->rx_queue[0];
 	int work_done = 0;
 
 	/* Clear IEVENT, so interrupts aren't called again
 	 * because of the packets that have already arrived
 	 */
-	gfar_write(&regs->ievent, IEVENT_RTX_MASK);
-
-	/* run Tx cleanup to completion */
-	if (tx_queue->tx_skbuff[tx_queue->skb_dirtytx])
-		gfar_clean_tx_ring(tx_queue);
+	gfar_write(&regs->ievent, IEVENT_RX_MASK);
 
 	work_done = gfar_clean_rx_ring(rx_queue, budget);
 
 	if (work_done < budget) {
+		u32 imask;
 		napi_complete(napi);
 		/* Clear the halt bit in RSTAT */
 		gfar_write(&regs->rstat, gfargrp->rstat);
 
-		gfar_write(&regs->imask, IMASK_DEFAULT);
+		spin_lock_irq(&gfargrp->grplock);
+		imask = gfar_read(&regs->imask);
+		imask |= IMASK_RX_DEFAULT;
+		gfar_write(&regs->imask, imask);
+		spin_unlock_irq(&gfargrp->grplock);
 	}
 
 	return work_done;
 }
 
-static int gfar_poll(struct napi_struct *napi, int budget)
+static int gfar_poll_tx_sq(struct napi_struct *napi, int budget)
 {
 	struct gfar_priv_grp *gfargrp =
-		container_of(napi, struct gfar_priv_grp, napi);
+		container_of(napi, struct gfar_priv_grp, napi_tx);
+	struct gfar __iomem *regs = gfargrp->regs;
+	struct gfar_priv_tx_q *tx_queue = gfargrp->priv->tx_queue[0];
+	u32 imask;
+
+	/* Clear IEVENT, so interrupts aren't called again
+	 * because of the packets that have already arrived
+	 */
+	gfar_write(&regs->ievent, IEVENT_TX_MASK);
+
+	/* run Tx cleanup to completion */
+	if (tx_queue->tx_skbuff[tx_queue->skb_dirtytx])
+		gfar_clean_tx_ring(tx_queue);
+
+	napi_complete(napi);
+
+	spin_lock_irq(&gfargrp->grplock);
+	imask = gfar_read(&regs->imask);
+	imask |= IMASK_TX_DEFAULT;
+	gfar_write(&regs->imask, imask);
+	spin_unlock_irq(&gfargrp->grplock);
+
+	return 0;
+}
+
+static int gfar_poll_rx(struct napi_struct *napi, int budget)
+{
+	struct gfar_priv_grp *gfargrp =
+		container_of(napi, struct gfar_priv_grp, napi_rx);
 	struct gfar_private *priv = gfargrp->priv;
 	struct gfar __iomem *regs = gfargrp->regs;
-	struct gfar_priv_tx_q *tx_queue = NULL;
 	struct gfar_priv_rx_q *rx_queue = NULL;
 	int work_done = 0, work_done_per_q = 0;
 	int i, budget_per_q = 0;
-	int has_tx_work = 0;
 	unsigned long rstat_rxf;
 	int num_act_queues;
 
 	/* Clear IEVENT, so interrupts aren't called again
 	 * because of the packets that have already arrived
 	 */
-	gfar_write(&regs->ievent, IEVENT_RTX_MASK);
+	gfar_write(&regs->ievent, IEVENT_RX_MASK);
 
 	rstat_rxf = gfar_read(&regs->rstat) & RSTAT_RXF_MASK;
 
@@ -2842,15 +2896,6 @@ static int gfar_poll(struct napi_struct *napi, int budget)
 	if (num_act_queues)
 		budget_per_q = budget/num_act_queues;
 
-	for_each_set_bit(i, &gfargrp->tx_bit_map, priv->num_tx_queues) {
-		tx_queue = priv->tx_queue[i];
-		/* run Tx cleanup to completion */
-		if (tx_queue->tx_skbuff[tx_queue->skb_dirtytx]) {
-			gfar_clean_tx_ring(tx_queue);
-			has_tx_work = 1;
-		}
-	}
-
 	for_each_set_bit(i, &gfargrp->rx_bit_map, priv->num_rx_queues) {
 		/* skip queue if not active */
 		if (!(rstat_rxf & (RSTAT_CLEAR_RXF0 >> i)))
@@ -2873,19 +2918,62 @@ static int gfar_poll(struct napi_struct *napi, int budget)
 		}
 	}
 
-	if (!num_act_queues && !has_tx_work) {
-
+	if (!num_act_queues) {
+		u32 imask;
 		napi_complete(napi);
 
 		/* Clear the halt bit in RSTAT */
 		gfar_write(&regs->rstat, gfargrp->rstat);
 
-		gfar_write(&regs->imask, IMASK_DEFAULT);
+		spin_lock_irq(&gfargrp->grplock);
+		imask = gfar_read(&regs->imask);
+		imask |= IMASK_RX_DEFAULT;
+		gfar_write(&regs->imask, imask);
+		spin_unlock_irq(&gfargrp->grplock);
 	}
 
 	return work_done;
 }
 
+static int gfar_poll_tx(struct napi_struct *napi, int budget)
+{
+	struct gfar_priv_grp *gfargrp =
+		container_of(napi, struct gfar_priv_grp, napi_tx);
+	struct gfar_private *priv = gfargrp->priv;
+	struct gfar __iomem *regs = gfargrp->regs;
+	struct gfar_priv_tx_q *tx_queue = NULL;
+	int has_tx_work = 0;
+	int i;
+
+	/* Clear IEVENT, so interrupts aren't called again
+	 * because of the packets that have already arrived
+	 */
+	gfar_write(&regs->ievent, IEVENT_TX_MASK);
+
+	for_each_set_bit(i, &gfargrp->tx_bit_map, priv->num_tx_queues) {
+		tx_queue = priv->tx_queue[i];
+		/* run Tx cleanup to completion */
+		if (tx_queue->tx_skbuff[tx_queue->skb_dirtytx]) {
+			gfar_clean_tx_ring(tx_queue);
+			has_tx_work = 1;
+		}
+	}
+
+	if (!has_tx_work) {
+		u32 imask;
+		napi_complete(napi);
+
+		spin_lock_irq(&gfargrp->grplock);
+		imask = gfar_read(&regs->imask);
+		imask |= IMASK_TX_DEFAULT;
+		gfar_write(&regs->imask, imask);
+		spin_unlock_irq(&gfargrp->grplock);
+	}
+
+	return 0;
+}
+
+
 #ifdef CONFIG_NET_POLL_CONTROLLER
 /* Polling 'interrupt' - used by things like netconsole to send skbs
  * without having to re-enable interrupts. It's not called while
diff --git a/drivers/net/ethernet/freescale/gianfar.h b/drivers/net/ethernet/freescale/gianfar.h
index 1e16216d4150..1aeb34e1efa5 100644
--- a/drivers/net/ethernet/freescale/gianfar.h
+++ b/drivers/net/ethernet/freescale/gianfar.h
@@ -377,8 +377,11 @@ extern const char gfar_driver_version[];
 		IMASK_RXFEN0 | IMASK_BSY | IMASK_EBERR | IMASK_BABR | \
 		IMASK_XFUN | IMASK_RXC | IMASK_BABT | IMASK_DPE \
 		| IMASK_PERR)
-#define IMASK_RTX_DISABLED ((~(IMASK_RXFEN0 | IMASK_TXFEN | IMASK_BSY)) \
-			   & IMASK_DEFAULT)
+#define IMASK_RX_DEFAULT (IMASK_RXFEN0 | IMASK_BSY)
+#define IMASK_TX_DEFAULT (IMASK_TXFEN | IMASK_TXBEN)
+
+#define IMASK_RX_DISABLED ((~(IMASK_RX_DEFAULT)) & IMASK_DEFAULT)
+#define IMASK_TX_DISABLED ((~(IMASK_TX_DEFAULT)) & IMASK_DEFAULT)
 
 /* Fifo management */
 #define FIFO_TX_THR_MASK	0x01ff
@@ -1014,13 +1017,13 @@ struct gfar_irqinfo {
 
 struct gfar_priv_grp {
 	spinlock_t grplock __attribute__ ((aligned (SMP_CACHE_BYTES)));
-	struct	napi_struct napi;
+	struct	napi_struct napi_rx;
+	struct	napi_struct napi_tx;
 	struct gfar_private *priv;
 	struct gfar __iomem *regs;
 	unsigned int rstat;
 	unsigned long num_rx_queues;
 	unsigned long rx_bit_map;
-	/* cacheline 3 */
 	unsigned int tstat;
 	unsigned long num_tx_queues;
 	unsigned long tx_bit_map;
-- 
cgit v1.2.2


From 71ff9e3df7e1c5d3293af6b595309124e8c97412 Mon Sep 17 00:00:00 2001
From: Claudiu Manoil <claudiu.manoil@freescale.com>
Date: Fri, 7 Mar 2014 14:42:46 +0200
Subject: gianfar: Use Single-Queue polling for "fsl,etsec2"

For the "fsl,etsec2" compatible models the driver currently
supports 8 Tx and Rx DMA rings (aka HW queues).  However, there
are only 2 pairs of Rx/Tx interrupt lines, as these controllers
are integrated in low power SoCs with 2 CPUs at most.  As a result,
there are at most 2 NAPI instances that have to service multiple
Tx and Rx queues for these devices.  This complicates the NAPI
polling routine having to iterate over the mutiple Rx/Tx queues
hooked to the same interrupt lines.  And there's also an overhead
at HW level, as the controller needs to service all the 8 Tx rings
in a round robin manner.  The combined overhead shows up for multi
parallel Tx flows transmitted by the kernel stack, when the driver
usually starts returning NETDEV_TX_BUSY leading to NETDEV WATCHDOG
Tx timeout triggering if the Tx path is congested for too long.

As an alternative, this patch makes the driver support only one
Tx/Rx DMA ring per NAPI instance (per interrupt group or pair
of Tx/Rx interrupt lines) by default.  The simplified single queue
polling routine (gfar_poll_sq) will be the default napi poll routine
for the etsec2 devices too.  Some adjustments needed to be made to
link the Tx/Rx HW queues with each NAPI instance (2 in this case).
The gfar_poll_sq() is already successfully used by older SQ_SG_MODE
(single interrupt group) controllers.
This patch fixes Tx timeout triggering under heavy Tx traffic load
(i.e. iperf -c -P 8) for the "fsl,etsec2" (currently the only
MQ_MG_MODE devices).  There's also a significant memory footprint
reduction by supporting 2 Rx/Tx DMA rings (at most), instead of 8,
for these devices.

Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/freescale/gianfar.c | 70 ++++++++++++++++++++++----------
 drivers/net/ethernet/freescale/gianfar.h | 41 ++++++++++++++-----
 2 files changed, 79 insertions(+), 32 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index 1aa2d55aa014..28effbecdab6 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -363,7 +363,10 @@ static void gfar_mac_rx_config(struct gfar_private *priv)
 	if (priv->rx_filer_enable) {
 		rctrl |= RCTRL_FILREN;
 		/* Program the RIR0 reg with the required distribution */
-		gfar_write(&regs->rir0, DEFAULT_RIR0);
+		if (priv->poll_mode == GFAR_SQ_POLLING)
+			gfar_write(&regs->rir0, DEFAULT_2RXQ_RIR0);
+		else /* GFAR_MQ_POLLING */
+			gfar_write(&regs->rir0, DEFAULT_8RXQ_RIR0);
 	}
 
 	/* Restore PROMISC mode */
@@ -636,7 +639,6 @@ static int gfar_parse_group(struct device_node *np,
 			    struct gfar_private *priv, const char *model)
 {
 	struct gfar_priv_grp *grp = &priv->gfargrp[priv->num_grps];
-	u32 *queue_mask;
 	int i;
 
 	for (i = 0; i < GFAR_NUM_IRQS; i++) {
@@ -665,12 +667,20 @@ static int gfar_parse_group(struct device_node *np,
 	grp->priv = priv;
 	spin_lock_init(&grp->grplock);
 	if (priv->mode == MQ_MG_MODE) {
-		queue_mask = (u32 *)of_get_property(np, "fsl,rx-bit-map", NULL);
-		grp->rx_bit_map = queue_mask ?
-			*queue_mask : (DEFAULT_MAPPING >> priv->num_grps);
-		queue_mask = (u32 *)of_get_property(np, "fsl,tx-bit-map", NULL);
-		grp->tx_bit_map = queue_mask ?
-			*queue_mask : (DEFAULT_MAPPING >> priv->num_grps);
+		u32 *rxq_mask, *txq_mask;
+		rxq_mask = (u32 *)of_get_property(np, "fsl,rx-bit-map", NULL);
+		txq_mask = (u32 *)of_get_property(np, "fsl,tx-bit-map", NULL);
+
+		if (priv->poll_mode == GFAR_SQ_POLLING) {
+			/* One Q per interrupt group: Q0 to G0, Q1 to G1 */
+			grp->rx_bit_map = (DEFAULT_MAPPING >> priv->num_grps);
+			grp->tx_bit_map = (DEFAULT_MAPPING >> priv->num_grps);
+		} else { /* GFAR_MQ_POLLING */
+			grp->rx_bit_map = rxq_mask ?
+			*rxq_mask : (DEFAULT_MAPPING >> priv->num_grps);
+			grp->tx_bit_map = txq_mask ?
+			*txq_mask : (DEFAULT_MAPPING >> priv->num_grps);
+		}
 	} else {
 		grp->rx_bit_map = 0xFF;
 		grp->tx_bit_map = 0xFF;
@@ -686,6 +696,8 @@ static int gfar_parse_group(struct device_node *np,
 	 * also assign queues to groups
 	 */
 	for_each_set_bit(i, &grp->rx_bit_map, priv->num_rx_queues) {
+		if (!grp->rx_queue)
+			grp->rx_queue = priv->rx_queue[i];
 		grp->num_rx_queues++;
 		grp->rstat |= (RSTAT_CLEAR_RHALT >> i);
 		priv->rqueue |= ((RQUEUE_EN0 | RQUEUE_EX0) >> i);
@@ -693,6 +705,8 @@ static int gfar_parse_group(struct device_node *np,
 	}
 
 	for_each_set_bit(i, &grp->tx_bit_map, priv->num_tx_queues) {
+		if (!grp->tx_queue)
+			grp->tx_queue = priv->tx_queue[i];
 		grp->num_tx_queues++;
 		grp->tstat |= (TSTAT_CLEAR_THALT >> i);
 		priv->tqueue |= (TQUEUE_EN0 >> i);
@@ -723,9 +737,22 @@ static int gfar_of_init(struct platform_device *ofdev, struct net_device **pdev)
 	if (!np || !of_device_is_available(np))
 		return -ENODEV;
 
-	/* parse the num of tx and rx queues */
+	/* parse the num of HW tx and rx queues */
 	tx_queues = (u32 *)of_get_property(np, "fsl,num_tx_queues", NULL);
-	num_tx_qs = tx_queues ? *tx_queues : 1;
+	rx_queues = (u32 *)of_get_property(np, "fsl,num_rx_queues", NULL);
+
+	if (priv->mode == SQ_SG_MODE) {
+		num_tx_qs = 1;
+		num_rx_qs = 1;
+	} else { /* MQ_MG_MODE */
+		if (priv->poll_mode == GFAR_SQ_POLLING) {
+			num_tx_qs = 2; /* one q per int group */
+			num_rx_qs = 2; /* one q per int group */
+		} else { /* GFAR_MQ_POLLING */
+			num_tx_qs = tx_queues ? *tx_queues : 1;
+			num_rx_qs = rx_queues ? *rx_queues : 1;
+		}
+	}
 
 	if (num_tx_qs > MAX_TX_QS) {
 		pr_err("num_tx_qs(=%d) greater than MAX_TX_QS(=%d)\n",
@@ -734,9 +761,6 @@ static int gfar_of_init(struct platform_device *ofdev, struct net_device **pdev)
 		return -EINVAL;
 	}
 
-	rx_queues = (u32 *)of_get_property(np, "fsl,num_rx_queues", NULL);
-	num_rx_qs = rx_queues ? *rx_queues : 1;
-
 	if (num_rx_qs > MAX_RX_QS) {
 		pr_err("num_rx_qs(=%d) greater than MAX_RX_QS(=%d)\n",
 		       num_rx_qs, MAX_RX_QS);
@@ -777,6 +801,7 @@ static int gfar_of_init(struct platform_device *ofdev, struct net_device **pdev)
 	/* Parse and initialize group specific information */
 	if (of_device_is_compatible(np, "fsl,etsec2")) {
 		priv->mode = MQ_MG_MODE;
+		priv->poll_mode = GFAR_SQ_POLLING;
 		for_each_child_of_node(np, child) {
 			err = gfar_parse_group(child, priv, model);
 			if (err)
@@ -784,6 +809,7 @@ static int gfar_of_init(struct platform_device *ofdev, struct net_device **pdev)
 		}
 	} else {
 		priv->mode = SQ_SG_MODE;
+		priv->poll_mode = GFAR_SQ_POLLING;
 		err = gfar_parse_group(np, priv, model);
 		if (err)
 			goto err_grp_init;
@@ -1263,13 +1289,13 @@ static int gfar_probe(struct platform_device *ofdev)
 	dev->ethtool_ops = &gfar_ethtool_ops;
 
 	/* Register for napi ...We are registering NAPI for each grp */
-	if (priv->mode == SQ_SG_MODE) {
-		netif_napi_add(dev, &priv->gfargrp[0].napi_rx, gfar_poll_rx_sq,
-			       GFAR_DEV_WEIGHT);
-		netif_napi_add(dev, &priv->gfargrp[0].napi_tx, gfar_poll_tx_sq,
-			       2);
-	} else {
-		for (i = 0; i < priv->num_grps; i++) {
+	for (i = 0; i < priv->num_grps; i++) {
+		if (priv->poll_mode == GFAR_SQ_POLLING) {
+			netif_napi_add(dev, &priv->gfargrp[i].napi_rx,
+				       gfar_poll_rx_sq, GFAR_DEV_WEIGHT);
+			netif_napi_add(dev, &priv->gfargrp[i].napi_tx,
+				       gfar_poll_tx_sq, 2);
+		} else {
 			netif_napi_add(dev, &priv->gfargrp[i].napi_rx,
 				       gfar_poll_rx, GFAR_DEV_WEIGHT);
 			netif_napi_add(dev, &priv->gfargrp[i].napi_tx,
@@ -2819,7 +2845,7 @@ static int gfar_poll_rx_sq(struct napi_struct *napi, int budget)
 	struct gfar_priv_grp *gfargrp =
 		container_of(napi, struct gfar_priv_grp, napi_rx);
 	struct gfar __iomem *regs = gfargrp->regs;
-	struct gfar_priv_rx_q *rx_queue = gfargrp->priv->rx_queue[0];
+	struct gfar_priv_rx_q *rx_queue = gfargrp->rx_queue;
 	int work_done = 0;
 
 	/* Clear IEVENT, so interrupts aren't called again
@@ -2850,7 +2876,7 @@ static int gfar_poll_tx_sq(struct napi_struct *napi, int budget)
 	struct gfar_priv_grp *gfargrp =
 		container_of(napi, struct gfar_priv_grp, napi_tx);
 	struct gfar __iomem *regs = gfargrp->regs;
-	struct gfar_priv_tx_q *tx_queue = gfargrp->priv->tx_queue[0];
+	struct gfar_priv_tx_q *tx_queue = gfargrp->tx_queue;
 	u32 imask;
 
 	/* Clear IEVENT, so interrupts aren't called again
diff --git a/drivers/net/ethernet/freescale/gianfar.h b/drivers/net/ethernet/freescale/gianfar.h
index 1aeb34e1efa5..84632c569f2c 100644
--- a/drivers/net/ethernet/freescale/gianfar.h
+++ b/drivers/net/ethernet/freescale/gianfar.h
@@ -412,7 +412,9 @@ extern const char gfar_driver_version[];
 
 /* This default RIR value directly corresponds
  * to the 3-bit hash value generated */
-#define DEFAULT_RIR0	0x05397700
+#define DEFAULT_8RXQ_RIR0	0x05397700
+/* Map even hash values to Q0, and odd ones to Q1 */
+#define DEFAULT_2RXQ_RIR0	0x04104100
 
 /* RQFCR register bits */
 #define RQFCR_GPI		0x80000000
@@ -907,6 +909,22 @@ enum {
 	MQ_MG_MODE
 };
 
+/* GFAR_SQ_POLLING: Single Queue NAPI polling mode
+ *	The driver supports a single pair of RX/Tx queues
+ *	per interrupt group (Rx/Tx int line). MQ_MG mode
+ *	devices have 2 interrupt groups, so the device will
+ *	have a total of 2 Tx and 2 Rx queues in this case.
+ * GFAR_MQ_POLLING: Multi Queue NAPI polling mode
+ *	The driver supports all the 8 Rx and Tx HW queues
+ *	each queue mapped by the Device Tree to one of
+ *	the 2 interrupt groups. This mode implies significant
+ *	processing overhead (CPU and controller level).
+ */
+enum gfar_poll_mode {
+	GFAR_SQ_POLLING = 0,
+	GFAR_MQ_POLLING
+};
+
 /*
  * Per TX queue stats
  */
@@ -1016,17 +1034,20 @@ struct gfar_irqinfo {
  */
 
 struct gfar_priv_grp {
-	spinlock_t grplock __attribute__ ((aligned (SMP_CACHE_BYTES)));
+	spinlock_t grplock __aligned(SMP_CACHE_BYTES);
 	struct	napi_struct napi_rx;
 	struct	napi_struct napi_tx;
-	struct gfar_private *priv;
 	struct gfar __iomem *regs;
-	unsigned int rstat;
-	unsigned long num_rx_queues;
-	unsigned long rx_bit_map;
+	struct gfar_priv_tx_q *tx_queue;
+	struct gfar_priv_rx_q *rx_queue;
 	unsigned int tstat;
+	unsigned int rstat;
+
+	struct gfar_private *priv;
 	unsigned long num_tx_queues;
 	unsigned long tx_bit_map;
+	unsigned long num_rx_queues;
+	unsigned long rx_bit_map;
 
 	struct gfar_irqinfo *irqinfo[GFAR_NUM_IRQS];
 };
@@ -1056,8 +1077,6 @@ enum gfar_dev_state {
  * the buffer descriptor determines the actual condition.
  */
 struct gfar_private {
-	unsigned int num_rx_queues;
-
 	struct device *dev;
 	struct net_device *ndev;
 	enum gfar_errata errata;
@@ -1065,6 +1084,7 @@ struct gfar_private {
 
 	u16 uses_rxfcb;
 	u16 padding;
+	u32 device_flags;
 
 	/* HW time stamping enabled flag */
 	int hwts_rx_en;
@@ -1075,10 +1095,11 @@ struct gfar_private {
 	struct gfar_priv_grp gfargrp[MAXGROUPS];
 
 	unsigned long state;
-	u32 device_flags;
 
-	unsigned int mode;
+	unsigned short mode;
+	unsigned short poll_mode;
 	unsigned int num_tx_queues;
+	unsigned int num_rx_queues;
 	unsigned int num_grps;
 
 	/* Network Statistics */
-- 
cgit v1.2.2


From cd84ff4da1f46cbdc2d73366eabe9a8f818447cd Mon Sep 17 00:00:00 2001
From: Edward Cree <ecree@solarflare.com>
Date: Fri, 7 Mar 2014 18:27:41 +0000
Subject: sfc: Use ether_addr_copy and eth_broadcast_addr

Faster than memcpy/memset on some architectures.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/sfc/ef10.c        | 13 +++++--------
 drivers/net/ethernet/sfc/efx.c         |  4 ++--
 drivers/net/ethernet/sfc/ethtool.c     | 18 +++++++++---------
 drivers/net/ethernet/sfc/falcon.c      |  2 +-
 drivers/net/ethernet/sfc/filter.h      |  2 +-
 drivers/net/ethernet/sfc/mcdi.c        | 14 ++++++++------
 drivers/net/ethernet/sfc/mcdi_port.c   |  4 ++--
 drivers/net/ethernet/sfc/selftest.c    |  6 +++---
 drivers/net/ethernet/sfc/siena_sriov.c | 13 ++++++-------
 9 files changed, 37 insertions(+), 39 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/sfc/ef10.c b/drivers/net/ethernet/sfc/ef10.c
index 3b397987119d..eb75675f6e32 100644
--- a/drivers/net/ethernet/sfc/ef10.c
+++ b/drivers/net/ethernet/sfc/ef10.c
@@ -162,8 +162,8 @@ static int efx_ef10_get_mac_address(struct efx_nic *efx, u8 *mac_address)
 	if (outlen < MC_CMD_GET_MAC_ADDRESSES_OUT_LEN)
 		return -EIO;
 
-	memcpy(mac_address,
-	       MCDI_PTR(outbuf, GET_MAC_ADDRESSES_OUT_MAC_ADDR_BASE), ETH_ALEN);
+	ether_addr_copy(mac_address,
+			MCDI_PTR(outbuf, GET_MAC_ADDRESSES_OUT_MAC_ADDR_BASE));
 	return 0;
 }
 
@@ -3145,12 +3145,10 @@ static void efx_ef10_filter_sync_rx_mode(struct efx_nic *efx)
 		table->dev_uc_count = -1;
 	} else {
 		table->dev_uc_count = 1 + netdev_uc_count(net_dev);
-		memcpy(table->dev_uc_list[0].addr, net_dev->dev_addr,
-		       ETH_ALEN);
+		ether_addr_copy(table->dev_uc_list[0].addr, net_dev->dev_addr);
 		i = 1;
 		netdev_for_each_uc_addr(uc, net_dev) {
-			memcpy(table->dev_uc_list[i].addr,
-			       uc->addr, ETH_ALEN);
+			ether_addr_copy(table->dev_uc_list[i].addr, uc->addr);
 			i++;
 		}
 	}
@@ -3162,8 +3160,7 @@ static void efx_ef10_filter_sync_rx_mode(struct efx_nic *efx)
 		eth_broadcast_addr(table->dev_mc_list[0].addr);
 		i = 1;
 		netdev_for_each_mc_addr(mc, net_dev) {
-			memcpy(table->dev_mc_list[i].addr,
-			       mc->addr, ETH_ALEN);
+			ether_addr_copy(table->dev_mc_list[i].addr, mc->addr);
 			i++;
 		}
 	}
diff --git a/drivers/net/ethernet/sfc/efx.c b/drivers/net/ethernet/sfc/efx.c
index d72e0038a740..52589f6a8beb 100644
--- a/drivers/net/ethernet/sfc/efx.c
+++ b/drivers/net/ethernet/sfc/efx.c
@@ -1012,7 +1012,7 @@ static int efx_probe_port(struct efx_nic *efx)
 		return rc;
 
 	/* Initialise MAC address to permanent address */
-	memcpy(efx->net_dev->dev_addr, efx->net_dev->perm_addr, ETH_ALEN);
+	ether_addr_copy(efx->net_dev->dev_addr, efx->net_dev->perm_addr);
 
 	return 0;
 }
@@ -2120,7 +2120,7 @@ static int efx_set_mac_address(struct net_device *net_dev, void *data)
 		return -EADDRNOTAVAIL;
 	}
 
-	memcpy(net_dev->dev_addr, new_addr, net_dev->addr_len);
+	ether_addr_copy(net_dev->dev_addr, new_addr);
 	efx_sriov_mac_address_changed(efx);
 
 	/* Reconfigure the MAC */
diff --git a/drivers/net/ethernet/sfc/ethtool.c b/drivers/net/ethernet/sfc/ethtool.c
index 89fcaffd7de2..0de8b07c24c2 100644
--- a/drivers/net/ethernet/sfc/ethtool.c
+++ b/drivers/net/ethernet/sfc/ethtool.c
@@ -727,7 +727,7 @@ static int efx_ethtool_reset(struct net_device *net_dev, u32 *flags)
 }
 
 /* MAC address mask including only I/G bit */
-static const u8 mac_addr_ig_mask[ETH_ALEN] = { 0x01, 0, 0, 0, 0, 0 };
+static const u8 mac_addr_ig_mask[ETH_ALEN] __aligned(2) = {0x01, 0, 0, 0, 0, 0};
 
 #define IP4_ADDR_FULL_MASK	((__force __be32)~0)
 #define PORT_FULL_MASK		((__force __be16)~0)
@@ -787,16 +787,16 @@ static int efx_ethtool_get_class_rule(struct efx_nic *efx,
 		rule->flow_type = ETHER_FLOW;
 		if (spec.match_flags &
 		    (EFX_FILTER_MATCH_LOC_MAC | EFX_FILTER_MATCH_LOC_MAC_IG)) {
-			memcpy(mac_entry->h_dest, spec.loc_mac, ETH_ALEN);
+			ether_addr_copy(mac_entry->h_dest, spec.loc_mac);
 			if (spec.match_flags & EFX_FILTER_MATCH_LOC_MAC)
-				memset(mac_mask->h_dest, ~0, ETH_ALEN);
+				eth_broadcast_addr(mac_mask->h_dest);
 			else
-				memcpy(mac_mask->h_dest, mac_addr_ig_mask,
-				       ETH_ALEN);
+				ether_addr_copy(mac_mask->h_dest,
+						mac_addr_ig_mask);
 		}
 		if (spec.match_flags & EFX_FILTER_MATCH_REM_MAC) {
-			memcpy(mac_entry->h_source, spec.rem_mac, ETH_ALEN);
-			memset(mac_mask->h_source, ~0, ETH_ALEN);
+			ether_addr_copy(mac_entry->h_source, spec.rem_mac);
+			eth_broadcast_addr(mac_mask->h_source);
 		}
 		if (spec.match_flags & EFX_FILTER_MATCH_ETHER_TYPE) {
 			mac_entry->h_proto = spec.ether_type;
@@ -968,13 +968,13 @@ static int efx_ethtool_set_class_rule(struct efx_nic *efx,
 				spec.match_flags |= EFX_FILTER_MATCH_LOC_MAC;
 			else
 				return -EINVAL;
-			memcpy(spec.loc_mac, mac_entry->h_dest, ETH_ALEN);
+			ether_addr_copy(spec.loc_mac, mac_entry->h_dest);
 		}
 		if (!is_zero_ether_addr(mac_mask->h_source)) {
 			if (!is_broadcast_ether_addr(mac_mask->h_source))
 				return -EINVAL;
 			spec.match_flags |= EFX_FILTER_MATCH_REM_MAC;
-			memcpy(spec.rem_mac, mac_entry->h_source, ETH_ALEN);
+			ether_addr_copy(spec.rem_mac, mac_entry->h_source);
 		}
 		if (mac_mask->h_proto) {
 			if (mac_mask->h_proto != ETHER_TYPE_FULL_MASK)
diff --git a/drivers/net/ethernet/sfc/falcon.c b/drivers/net/ethernet/sfc/falcon.c
index 72652f380243..8ec20b713cc6 100644
--- a/drivers/net/ethernet/sfc/falcon.c
+++ b/drivers/net/ethernet/sfc/falcon.c
@@ -2183,7 +2183,7 @@ static int falcon_probe_nvconfig(struct efx_nic *efx)
 	}
 
 	/* Read the MAC addresses */
-	memcpy(efx->net_dev->perm_addr, nvconfig->mac_address[0], ETH_ALEN);
+	ether_addr_copy(efx->net_dev->perm_addr, nvconfig->mac_address[0]);
 
 	netif_dbg(efx, probe, efx->net_dev, "PHY is %d phy_id %d\n",
 		  efx->phy_type, efx->mdio.prtad);
diff --git a/drivers/net/ethernet/sfc/filter.h b/drivers/net/ethernet/sfc/filter.h
index 3ef298d3c47e..d0ed7f71ea7e 100644
--- a/drivers/net/ethernet/sfc/filter.h
+++ b/drivers/net/ethernet/sfc/filter.h
@@ -243,7 +243,7 @@ static inline int efx_filter_set_eth_local(struct efx_filter_spec *spec,
 	}
 	if (addr != NULL) {
 		spec->match_flags |= EFX_FILTER_MATCH_LOC_MAC;
-		memcpy(spec->loc_mac, addr, ETH_ALEN);
+		ether_addr_copy(spec->loc_mac, addr);
 	}
 	return 0;
 }
diff --git a/drivers/net/ethernet/sfc/mcdi.c b/drivers/net/ethernet/sfc/mcdi.c
index eb59abb57e85..7bd4b14bf3b3 100644
--- a/drivers/net/ethernet/sfc/mcdi.c
+++ b/drivers/net/ethernet/sfc/mcdi.c
@@ -1187,6 +1187,9 @@ int efx_mcdi_get_board_cfg(struct efx_nic *efx, u8 *mac_address,
 	int rc;
 
 	BUILD_BUG_ON(MC_CMD_GET_BOARD_CFG_IN_LEN != 0);
+	/* we need __aligned(2) for ether_addr_copy */
+	BUILD_BUG_ON(MC_CMD_GET_BOARD_CFG_OUT_MAC_ADDR_BASE_PORT0_OFST & 1);
+	BUILD_BUG_ON(MC_CMD_GET_BOARD_CFG_OUT_MAC_ADDR_BASE_PORT1_OFST & 1);
 
 	rc = efx_mcdi_rpc(efx, MC_CMD_GET_BOARD_CFG, NULL, 0,
 			  outbuf, sizeof(outbuf), &outlen);
@@ -1199,11 +1202,10 @@ int efx_mcdi_get_board_cfg(struct efx_nic *efx, u8 *mac_address,
 	}
 
 	if (mac_address)
-		memcpy(mac_address,
-		       port_num ?
-		       MCDI_PTR(outbuf, GET_BOARD_CFG_OUT_MAC_ADDR_BASE_PORT1) :
-		       MCDI_PTR(outbuf, GET_BOARD_CFG_OUT_MAC_ADDR_BASE_PORT0),
-		       ETH_ALEN);
+		ether_addr_copy(mac_address,
+				port_num ?
+				MCDI_PTR(outbuf, GET_BOARD_CFG_OUT_MAC_ADDR_BASE_PORT1) :
+				MCDI_PTR(outbuf, GET_BOARD_CFG_OUT_MAC_ADDR_BASE_PORT0));
 	if (fw_subtype_list) {
 		for (i = 0;
 		     i < MCDI_VAR_ARRAY_LEN(outlen,
@@ -1532,7 +1534,7 @@ static int efx_mcdi_wol_filter_set(struct efx_nic *efx, u32 type,
 	MCDI_SET_DWORD(inbuf, WOL_FILTER_SET_IN_WOL_TYPE, type);
 	MCDI_SET_DWORD(inbuf, WOL_FILTER_SET_IN_FILTER_MODE,
 		       MC_CMD_FILTER_MODE_SIMPLE);
-	memcpy(MCDI_PTR(inbuf, WOL_FILTER_SET_IN_MAGIC_MAC), mac, ETH_ALEN);
+	ether_addr_copy(MCDI_PTR(inbuf, WOL_FILTER_SET_IN_MAGIC_MAC), mac);
 
 	rc = efx_mcdi_rpc(efx, MC_CMD_WOL_FILTER_SET, inbuf, sizeof(inbuf),
 			  outbuf, sizeof(outbuf), &outlen);
diff --git a/drivers/net/ethernet/sfc/mcdi_port.c b/drivers/net/ethernet/sfc/mcdi_port.c
index 91d23252f8fa..e5fc4e1574b5 100644
--- a/drivers/net/ethernet/sfc/mcdi_port.c
+++ b/drivers/net/ethernet/sfc/mcdi_port.c
@@ -854,8 +854,8 @@ int efx_mcdi_set_mac(struct efx_nic *efx)
 
 	BUILD_BUG_ON(MC_CMD_SET_MAC_OUT_LEN != 0);
 
-	memcpy(MCDI_PTR(cmdbytes, SET_MAC_IN_ADDR),
-	       efx->net_dev->dev_addr, ETH_ALEN);
+	ether_addr_copy(MCDI_PTR(cmdbytes, SET_MAC_IN_ADDR),
+			efx->net_dev->dev_addr);
 
 	MCDI_SET_DWORD(cmdbytes, SET_MAC_IN_MTU,
 			EFX_MAX_FRAME_LEN(efx->net_dev->mtu));
diff --git a/drivers/net/ethernet/sfc/selftest.c b/drivers/net/ethernet/sfc/selftest.c
index 26641817a9c7..0fc5baef45b1 100644
--- a/drivers/net/ethernet/sfc/selftest.c
+++ b/drivers/net/ethernet/sfc/selftest.c
@@ -50,7 +50,7 @@ struct efx_loopback_payload {
 } __packed;
 
 /* Loopback test source MAC address */
-static const unsigned char payload_source[ETH_ALEN] = {
+static const u8 payload_source[ETH_ALEN] __aligned(2) = {
 	0x00, 0x0f, 0x53, 0x1b, 0x1b, 0x1b,
 };
 
@@ -366,8 +366,8 @@ static void efx_iterate_state(struct efx_nic *efx)
 	struct efx_loopback_payload *payload = &state->payload;
 
 	/* Initialise the layerII header */
-	memcpy(&payload->header.h_dest, net_dev->dev_addr, ETH_ALEN);
-	memcpy(&payload->header.h_source, &payload_source, ETH_ALEN);
+	ether_addr_copy((u8 *)&payload->header.h_dest, net_dev->dev_addr);
+	ether_addr_copy((u8 *)&payload->header.h_source, payload_source);
 	payload->header.h_proto = htons(ETH_P_IP);
 
 	/* saddr set later and used as incrementing count */
diff --git a/drivers/net/ethernet/sfc/siena_sriov.c b/drivers/net/ethernet/sfc/siena_sriov.c
index 0c38f926871e..9a9205e77896 100644
--- a/drivers/net/ethernet/sfc/siena_sriov.c
+++ b/drivers/net/ethernet/sfc/siena_sriov.c
@@ -1095,7 +1095,7 @@ static void efx_sriov_peer_work(struct work_struct *data)
 
 	/* Fill the remaining addresses */
 	list_for_each_entry(local_addr, &efx->local_addr_list, link) {
-		memcpy(peer->mac_addr, local_addr->addr, ETH_ALEN);
+		ether_addr_copy(peer->mac_addr, local_addr->addr);
 		peer->tci = 0;
 		++peer;
 		++peer_count;
@@ -1303,8 +1303,7 @@ int efx_sriov_init(struct efx_nic *efx)
 		goto fail_vfs;
 
 	rtnl_lock();
-	memcpy(vfdi_status->peers[0].mac_addr,
-	       net_dev->dev_addr, ETH_ALEN);
+	ether_addr_copy(vfdi_status->peers[0].mac_addr, net_dev->dev_addr);
 	efx->vf_init_count = efx->vf_count;
 	rtnl_unlock();
 
@@ -1452,8 +1451,8 @@ void efx_sriov_mac_address_changed(struct efx_nic *efx)
 
 	if (!efx->vf_init_count)
 		return;
-	memcpy(vfdi_status->peers[0].mac_addr,
-	       efx->net_dev->dev_addr, ETH_ALEN);
+	ether_addr_copy(vfdi_status->peers[0].mac_addr,
+			efx->net_dev->dev_addr);
 	queue_work(vfdi_workqueue, &efx->peer_work);
 }
 
@@ -1570,7 +1569,7 @@ int efx_sriov_set_vf_mac(struct net_device *net_dev, int vf_i, u8 *mac)
 	vf = efx->vf + vf_i;
 
 	mutex_lock(&vf->status_lock);
-	memcpy(vf->addr.mac_addr, mac, ETH_ALEN);
+	ether_addr_copy(vf->addr.mac_addr, mac);
 	__efx_sriov_update_vf_addr(vf);
 	mutex_unlock(&vf->status_lock);
 
@@ -1633,7 +1632,7 @@ int efx_sriov_get_vf_config(struct net_device *net_dev, int vf_i,
 	vf = efx->vf + vf_i;
 
 	ivi->vf = vf_i;
-	memcpy(ivi->mac, vf->addr.mac_addr, ETH_ALEN);
+	ether_addr_copy(ivi->mac, vf->addr.mac_addr);
 	ivi->tx_rate = 0;
 	tci = ntohs(vf->addr.tci);
 	ivi->vlan = tci & VLAN_VID_MASK;
-- 
cgit v1.2.2


From c120e9e03090b4f9578ca38ef4250ff3805b6e3f Mon Sep 17 00:00:00 2001
From: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com>
Date: Fri, 7 Mar 2014 19:48:25 -0300
Subject: IB/mlx5_core: remove unreachable function call in module init

The call to mlx5_health_cleanup() in the module init function can never
be reached. Removing it.

Signed-off-by: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com>
Acked-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/mellanox/mlx5/core/main.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c
index 6f7c866d0bfa..77ac95f052da 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c
@@ -531,7 +531,6 @@ static int __init init(void)
 
 	return 0;
 
-	mlx5_health_cleanup();
 err_debug:
 	mlx5_unregister_debugfs();
 	return err;
-- 
cgit v1.2.2


From 3ee2f8ce1ab8f235bda164295fa0cf39ec1c2400 Mon Sep 17 00:00:00 2001
From: Tim Harvey <tharvey@gateworks.com>
Date: Fri, 7 Mar 2014 20:59:53 -0800
Subject: sky2: allow mac to come from dt

The driver reads the mac address from the device registers which would
need to have been programmed by the bootloader.  This patch adds
the ability to pull the mac from devicetree via the pci device dt node.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Cc: netdev@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>

Changes since v2:
 - eliminated use of stack tmpaddr per feedback

Changes since v1:
 - simplified based on feedback
 - fixed formatting
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/marvell/sky2.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c
index 55a37ae11440..2434611d1b4e 100644
--- a/drivers/net/ethernet/marvell/sky2.c
+++ b/drivers/net/ethernet/marvell/sky2.c
@@ -44,6 +44,8 @@
 #include <linux/prefetch.h>
 #include <linux/debugfs.h>
 #include <linux/mii.h>
+#include <linux/of_device.h>
+#include <linux/of_net.h>
 
 #include <asm/irq.h>
 
@@ -4748,6 +4750,7 @@ static struct net_device *sky2_init_netdev(struct sky2_hw *hw, unsigned port,
 {
 	struct sky2_port *sky2;
 	struct net_device *dev = alloc_etherdev(sizeof(*sky2));
+	const void *iap;
 
 	if (!dev)
 		return NULL;
@@ -4805,8 +4808,16 @@ static struct net_device *sky2_init_netdev(struct sky2_hw *hw, unsigned port,
 
 	dev->features |= dev->hw_features;
 
-	/* read the mac address */
-	memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port * 8, ETH_ALEN);
+	/* try to get mac address in the following order:
+	 * 1) from device tree data
+	 * 2) from internal registers set by bootloader
+	 */
+	iap = of_get_mac_address(hw->pdev->dev.of_node);
+	if (iap)
+		memcpy(dev->dev_addr, iap, ETH_ALEN);
+	else
+		memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port * 8,
+			      ETH_ALEN);
 
 	return dev;
 }
-- 
cgit v1.2.2


From 54a7357f7ac408be4ef4ca82900bd24cb6789f36 Mon Sep 17 00:00:00 2001
From: KY Srinivasan <kys@microsoft.com>
Date: Sat, 8 Mar 2014 19:23:13 -0800
Subject: Drivers: net: hyperv: Enable scatter gather I/O

Cleanup the code and enable scatter gather I/O.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/hyperv/netvsc_drv.c | 153 ++++++++++++++++++++++++++++++----------
 1 file changed, 114 insertions(+), 39 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c
index 9ef6be90a81c..1f7b12f9e6fb 100644
--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -140,21 +140,123 @@ static void netvsc_xmit_completion(void *context)
 		dev_kfree_skb_any(skb);
 }
 
+static u32 fill_pg_buf(struct page *page, u32 offset, u32 len,
+			struct hv_page_buffer *pb)
+{
+	int j = 0;
+
+	/* Deal with compund pages by ignoring unused part
+	 * of the page.
+	 */
+	page += (offset >> PAGE_SHIFT);
+	offset &= ~PAGE_MASK;
+
+	while (len > 0) {
+		unsigned long bytes;
+
+		bytes = PAGE_SIZE - offset;
+		if (bytes > len)
+			bytes = len;
+		pb[j].pfn = page_to_pfn(page);
+		pb[j].offset = offset;
+		pb[j].len = bytes;
+
+		offset += bytes;
+		len -= bytes;
+
+		if (offset == PAGE_SIZE && len) {
+			page++;
+			offset = 0;
+			j++;
+		}
+	}
+
+	return j + 1;
+}
+
+static void init_page_array(void *hdr, u32 len, struct sk_buff *skb,
+			    struct hv_page_buffer *pb)
+{
+	u32 slots_used = 0;
+	char *data = skb->data;
+	int frags = skb_shinfo(skb)->nr_frags;
+	int i;
+
+	/* The packet is laid out thus:
+	 * 1. hdr
+	 * 2. skb linear data
+	 * 3. skb fragment data
+	 */
+	if (hdr != NULL)
+		slots_used += fill_pg_buf(virt_to_page(hdr),
+					offset_in_page(hdr),
+					len, &pb[slots_used]);
+
+	slots_used += fill_pg_buf(virt_to_page(data),
+				offset_in_page(data),
+				skb_headlen(skb), &pb[slots_used]);
+
+	for (i = 0; i < frags; i++) {
+		skb_frag_t *frag = skb_shinfo(skb)->frags + i;
+
+		slots_used += fill_pg_buf(skb_frag_page(frag),
+					frag->page_offset,
+					skb_frag_size(frag), &pb[slots_used]);
+	}
+}
+
+static int count_skb_frag_slots(struct sk_buff *skb)
+{
+	int i, frags = skb_shinfo(skb)->nr_frags;
+	int pages = 0;
+
+	for (i = 0; i < frags; i++) {
+		skb_frag_t *frag = skb_shinfo(skb)->frags + i;
+		unsigned long size = skb_frag_size(frag);
+		unsigned long offset = frag->page_offset;
+
+		/* Skip unused frames from start of page */
+		offset &= ~PAGE_MASK;
+		pages += PFN_UP(offset + size);
+	}
+	return pages;
+}
+
+static int netvsc_get_slots(struct sk_buff *skb)
+{
+	char *data = skb->data;
+	unsigned int offset = offset_in_page(data);
+	unsigned int len = skb_headlen(skb);
+	int slots;
+	int frag_slots;
+
+	slots = DIV_ROUND_UP(offset + len, PAGE_SIZE);
+	frag_slots = count_skb_frag_slots(skb);
+	return slots + frag_slots;
+}
+
 static int netvsc_start_xmit(struct sk_buff *skb, struct net_device *net)
 {
 	struct net_device_context *net_device_ctx = netdev_priv(net);
 	struct hv_netvsc_packet *packet;
 	int ret;
-	unsigned int i, num_pages, npg_data;
+	unsigned int num_data_pages;
 
-	/* Add multipages for skb->data and additional 2 for RNDIS */
-	npg_data = (((unsigned long)skb->data + skb_headlen(skb) - 1)
-		>> PAGE_SHIFT) - ((unsigned long)skb->data >> PAGE_SHIFT) + 1;
-	num_pages = skb_shinfo(skb)->nr_frags + npg_data + 2;
+	/* We will atmost need two pages to describe the rndis
+	 * header. We can only transmit MAX_PAGE_BUFFER_COUNT number
+	 * of pages in a single packet.
+	 */
+	num_data_pages = netvsc_get_slots(skb) + 2;
+	if (num_data_pages > MAX_PAGE_BUFFER_COUNT) {
+		netdev_err(net, "Packet too big: %u\n", skb->len);
+		dev_kfree_skb(skb);
+		net->stats.tx_dropped++;
+		return NETDEV_TX_OK;
+	}
 
 	/* Allocate a netvsc packet based on # of frags. */
 	packet = kzalloc(sizeof(struct hv_netvsc_packet) +
-			 (num_pages * sizeof(struct hv_page_buffer)) +
+			 (num_data_pages * sizeof(struct hv_page_buffer)) +
 			 sizeof(struct rndis_message) +
 			 NDIS_VLAN_PPI_SIZE, GFP_ATOMIC);
 	if (!packet) {
@@ -169,44 +271,17 @@ static int netvsc_start_xmit(struct sk_buff *skb, struct net_device *net)
 	packet->vlan_tci = skb->vlan_tci;
 
 	packet->extension = (void *)(unsigned long)packet +
-				sizeof(struct hv_netvsc_packet) +
-				    (num_pages * sizeof(struct hv_page_buffer));
+			sizeof(struct hv_netvsc_packet) +
+			(num_data_pages * sizeof(struct hv_page_buffer));
 
 	/* If the rndis msg goes beyond 1 page, we will add 1 later */
-	packet->page_buf_cnt = num_pages - 1;
+	packet->page_buf_cnt = num_data_pages - 1;
 
 	/* Initialize it from the skb */
 	packet->total_data_buflen = skb->len;
 
 	/* Start filling in the page buffers starting after RNDIS buffer. */
-	packet->page_buf[1].pfn = virt_to_phys(skb->data) >> PAGE_SHIFT;
-	packet->page_buf[1].offset
-		= (unsigned long)skb->data & (PAGE_SIZE - 1);
-	if (npg_data == 1)
-		packet->page_buf[1].len = skb_headlen(skb);
-	else
-		packet->page_buf[1].len = PAGE_SIZE
-			- packet->page_buf[1].offset;
-
-	for (i = 2; i <= npg_data; i++) {
-		packet->page_buf[i].pfn = virt_to_phys(skb->data
-			+ PAGE_SIZE * (i-1)) >> PAGE_SHIFT;
-		packet->page_buf[i].offset = 0;
-		packet->page_buf[i].len = PAGE_SIZE;
-	}
-	if (npg_data > 1)
-		packet->page_buf[npg_data].len = (((unsigned long)skb->data
-			+ skb_headlen(skb) - 1) & (PAGE_SIZE - 1)) + 1;
-
-	/* Additional fragments are after SKB data */
-	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
-		const skb_frag_t *f = &skb_shinfo(skb)->frags[i];
-
-		packet->page_buf[i+npg_data+1].pfn =
-			page_to_pfn(skb_frag_page(f));
-		packet->page_buf[i+npg_data+1].offset = f->page_offset;
-		packet->page_buf[i+npg_data+1].len = skb_frag_size(f);
-	}
+	init_page_array(NULL, 0, skb, &packet->page_buf[1]);
 
 	/* Set the completion routine */
 	packet->completion.send.send_completion = netvsc_xmit_completion;
@@ -451,8 +526,8 @@ static int netvsc_probe(struct hv_device *dev,
 	net->netdev_ops = &device_ops;
 
 	/* TODO: Add GSO and Checksum offload */
-	net->hw_features = 0;
-	net->features = NETIF_F_HW_VLAN_CTAG_TX;
+	net->hw_features = NETIF_F_SG;
+	net->features = NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_SG;
 
 	SET_ETHTOOL_OPS(net, &ethtool_ops);
 	SET_NETDEV_DEV(net, &dev->device);
-- 
cgit v1.2.2


From 8a00251a3682a23649cef36949c8019f8589c021 Mon Sep 17 00:00:00 2001
From: KY Srinivasan <kys@microsoft.com>
Date: Sat, 8 Mar 2014 19:23:14 -0800
Subject: Drivers: net: hyperv: Cleanup the send path

In preparation for enabling offloads, cleanup the send path.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/hyperv/hyperv_net.h   |  7 +---
 drivers/net/hyperv/netvsc_drv.c   | 88 +++++++++++++++++++++++++++++++--------
 drivers/net/hyperv/rndis_filter.c | 66 -----------------------------
 3 files changed, 71 insertions(+), 90 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/hyperv/hyperv_net.h b/drivers/net/hyperv/hyperv_net.h
index 39fc230f5c20..694bf7cada90 100644
--- a/drivers/net/hyperv/hyperv_net.h
+++ b/drivers/net/hyperv/hyperv_net.h
@@ -73,7 +73,7 @@ struct hv_netvsc_packet {
 	} completion;
 
 	/* This points to the memory after page_buf */
-	void *extension;
+	struct rndis_message *rndis_msg;
 
 	u32 total_data_buflen;
 	/* Points to the send/receive buffer where the ethernet frame is */
@@ -126,11 +126,6 @@ void rndis_filter_device_remove(struct hv_device *dev);
 int rndis_filter_receive(struct hv_device *dev,
 			struct hv_netvsc_packet *pkt);
 
-
-
-int rndis_filter_send(struct hv_device *dev,
-			struct hv_netvsc_packet *pkt);
-
 int rndis_filter_set_packet_filter(struct rndis_device *dev, u32 new_filter);
 int rndis_filter_set_device_mac(struct hv_device *hdev, char *mac);
 
diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c
index 1f7b12f9e6fb..7010c0630d24 100644
--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -128,6 +128,27 @@ static int netvsc_close(struct net_device *net)
 	return ret;
 }
 
+static void *init_ppi_data(struct rndis_message *msg, u32 ppi_size,
+				int pkt_type)
+{
+	struct rndis_packet *rndis_pkt;
+	struct rndis_per_packet_info *ppi;
+
+	rndis_pkt = &msg->msg.pkt;
+	rndis_pkt->data_offset += ppi_size;
+
+	ppi = (struct rndis_per_packet_info *)((void *)rndis_pkt +
+		rndis_pkt->per_pkt_info_offset + rndis_pkt->per_pkt_info_len);
+
+	ppi->size = ppi_size;
+	ppi->type = pkt_type;
+	ppi->ppi_offset = sizeof(struct rndis_per_packet_info);
+
+	rndis_pkt->per_pkt_info_len += ppi_size;
+
+	return ppi;
+}
+
 static void netvsc_xmit_completion(void *context)
 {
 	struct hv_netvsc_packet *packet = (struct hv_netvsc_packet *)context;
@@ -174,8 +195,8 @@ static u32 fill_pg_buf(struct page *page, u32 offset, u32 len,
 	return j + 1;
 }
 
-static void init_page_array(void *hdr, u32 len, struct sk_buff *skb,
-			    struct hv_page_buffer *pb)
+static u32 init_page_array(void *hdr, u32 len, struct sk_buff *skb,
+			   struct hv_page_buffer *pb)
 {
 	u32 slots_used = 0;
 	char *data = skb->data;
@@ -203,6 +224,7 @@ static void init_page_array(void *hdr, u32 len, struct sk_buff *skb,
 					frag->page_offset,
 					skb_frag_size(frag), &pb[slots_used]);
 	}
+	return slots_used;
 }
 
 static int count_skb_frag_slots(struct sk_buff *skb)
@@ -240,14 +262,19 @@ static int netvsc_start_xmit(struct sk_buff *skb, struct net_device *net)
 	struct net_device_context *net_device_ctx = netdev_priv(net);
 	struct hv_netvsc_packet *packet;
 	int ret;
-	unsigned int num_data_pages;
+	unsigned int num_data_pgs;
+	struct rndis_message *rndis_msg;
+	struct rndis_packet *rndis_pkt;
+	u32 rndis_msg_size;
+	bool isvlan;
+	struct rndis_per_packet_info *ppi;
 
 	/* We will atmost need two pages to describe the rndis
 	 * header. We can only transmit MAX_PAGE_BUFFER_COUNT number
 	 * of pages in a single packet.
 	 */
-	num_data_pages = netvsc_get_slots(skb) + 2;
-	if (num_data_pages > MAX_PAGE_BUFFER_COUNT) {
+	num_data_pgs = netvsc_get_slots(skb) + 2;
+	if (num_data_pgs > MAX_PAGE_BUFFER_COUNT) {
 		netdev_err(net, "Packet too big: %u\n", skb->len);
 		dev_kfree_skb(skb);
 		net->stats.tx_dropped++;
@@ -256,7 +283,7 @@ static int netvsc_start_xmit(struct sk_buff *skb, struct net_device *net)
 
 	/* Allocate a netvsc packet based on # of frags. */
 	packet = kzalloc(sizeof(struct hv_netvsc_packet) +
-			 (num_data_pages * sizeof(struct hv_page_buffer)) +
+			 (num_data_pgs * sizeof(struct hv_page_buffer)) +
 			 sizeof(struct rndis_message) +
 			 NDIS_VLAN_PPI_SIZE, GFP_ATOMIC);
 	if (!packet) {
@@ -270,26 +297,51 @@ static int netvsc_start_xmit(struct sk_buff *skb, struct net_device *net)
 
 	packet->vlan_tci = skb->vlan_tci;
 
-	packet->extension = (void *)(unsigned long)packet +
-			sizeof(struct hv_netvsc_packet) +
-			(num_data_pages * sizeof(struct hv_page_buffer));
-
-	/* If the rndis msg goes beyond 1 page, we will add 1 later */
-	packet->page_buf_cnt = num_data_pages - 1;
-
-	/* Initialize it from the skb */
+	packet->is_data_pkt = true;
 	packet->total_data_buflen = skb->len;
 
-	/* Start filling in the page buffers starting after RNDIS buffer. */
-	init_page_array(NULL, 0, skb, &packet->page_buf[1]);
+	packet->rndis_msg = (struct rndis_message *)((unsigned long)packet +
+				sizeof(struct hv_netvsc_packet) +
+				(num_data_pgs * sizeof(struct hv_page_buffer)));
 
 	/* Set the completion routine */
 	packet->completion.send.send_completion = netvsc_xmit_completion;
 	packet->completion.send.send_completion_ctx = packet;
 	packet->completion.send.send_completion_tid = (unsigned long)skb;
 
-	ret = rndis_filter_send(net_device_ctx->device_ctx,
-				  packet);
+	isvlan = packet->vlan_tci & VLAN_TAG_PRESENT;
+
+	/* Add the rndis header */
+	rndis_msg = packet->rndis_msg;
+	rndis_msg->ndis_msg_type = RNDIS_MSG_PACKET;
+	rndis_msg->msg_len = packet->total_data_buflen;
+	rndis_pkt = &rndis_msg->msg.pkt;
+	rndis_pkt->data_offset = sizeof(struct rndis_packet);
+	rndis_pkt->data_len = packet->total_data_buflen;
+	rndis_pkt->per_pkt_info_offset = sizeof(struct rndis_packet);
+
+	rndis_msg_size = RNDIS_MESSAGE_SIZE(struct rndis_packet);
+
+	if (isvlan) {
+		struct ndis_pkt_8021q_info *vlan;
+
+		rndis_msg_size += NDIS_VLAN_PPI_SIZE;
+		ppi = init_ppi_data(rndis_msg, NDIS_VLAN_PPI_SIZE,
+					IEEE_8021Q_INFO);
+		vlan = (struct ndis_pkt_8021q_info *)((void *)ppi +
+						ppi->ppi_offset);
+		vlan->vlanid = packet->vlan_tci & VLAN_VID_MASK;
+		vlan->pri = (packet->vlan_tci & VLAN_PRIO_MASK) >>
+				VLAN_PRIO_SHIFT;
+	}
+
+	/* Start filling in the page buffers with the rndis hdr */
+	rndis_msg->msg_len += rndis_msg_size;
+	packet->page_buf_cnt = init_page_array(rndis_msg, rndis_msg_size,
+					skb, &packet->page_buf[0]);
+
+	ret = netvsc_send(net_device_ctx->device_ctx, packet);
+
 	if (ret == 0) {
 		net->stats.tx_bytes += skb->len;
 		net->stats.tx_packets++;
diff --git a/drivers/net/hyperv/rndis_filter.c b/drivers/net/hyperv/rndis_filter.c
index f0cc8ef21e1c..eaa149950af7 100644
--- a/drivers/net/hyperv/rndis_filter.c
+++ b/drivers/net/hyperv/rndis_filter.c
@@ -891,69 +891,3 @@ int rndis_filter_close(struct hv_device *dev)
 
 	return rndis_filter_close_device(nvdev->extension);
 }
-
-int rndis_filter_send(struct hv_device *dev,
-			     struct hv_netvsc_packet *pkt)
-{
-	struct rndis_message *rndis_msg;
-	struct rndis_packet *rndis_pkt;
-	u32 rndis_msg_size;
-	bool isvlan = pkt->vlan_tci & VLAN_TAG_PRESENT;
-
-	/* Add the rndis header */
-	rndis_msg = (struct rndis_message *)pkt->extension;
-
-	rndis_msg_size = RNDIS_MESSAGE_SIZE(struct rndis_packet);
-	if (isvlan)
-		rndis_msg_size += NDIS_VLAN_PPI_SIZE;
-
-	rndis_msg->ndis_msg_type = RNDIS_MSG_PACKET;
-	rndis_msg->msg_len = pkt->total_data_buflen +
-				      rndis_msg_size;
-
-	rndis_pkt = &rndis_msg->msg.pkt;
-	rndis_pkt->data_offset = sizeof(struct rndis_packet);
-	if (isvlan)
-		rndis_pkt->data_offset += NDIS_VLAN_PPI_SIZE;
-	rndis_pkt->data_len = pkt->total_data_buflen;
-
-	if (isvlan) {
-		struct rndis_per_packet_info *ppi;
-		struct ndis_pkt_8021q_info *vlan;
-
-		rndis_pkt->per_pkt_info_offset = sizeof(struct rndis_packet);
-		rndis_pkt->per_pkt_info_len = NDIS_VLAN_PPI_SIZE;
-
-		ppi = (struct rndis_per_packet_info *)((ulong)rndis_pkt +
-			rndis_pkt->per_pkt_info_offset);
-		ppi->size = NDIS_VLAN_PPI_SIZE;
-		ppi->type = IEEE_8021Q_INFO;
-		ppi->ppi_offset = sizeof(struct rndis_per_packet_info);
-
-		vlan = (struct ndis_pkt_8021q_info *)((ulong)ppi +
-			ppi->ppi_offset);
-		vlan->vlanid = pkt->vlan_tci & VLAN_VID_MASK;
-		vlan->pri = (pkt->vlan_tci & VLAN_PRIO_MASK) >> VLAN_PRIO_SHIFT;
-	}
-
-	pkt->is_data_pkt = true;
-	pkt->page_buf[0].pfn = virt_to_phys(rndis_msg) >> PAGE_SHIFT;
-	pkt->page_buf[0].offset =
-			(unsigned long)rndis_msg & (PAGE_SIZE-1);
-	pkt->page_buf[0].len = rndis_msg_size;
-
-	/* Add one page_buf if the rndis msg goes beyond page boundary */
-	if (pkt->page_buf[0].offset + rndis_msg_size > PAGE_SIZE) {
-		int i;
-		for (i = pkt->page_buf_cnt; i > 1; i--)
-			pkt->page_buf[i] = pkt->page_buf[i-1];
-		pkt->page_buf_cnt++;
-		pkt->page_buf[0].len = PAGE_SIZE - pkt->page_buf[0].offset;
-		pkt->page_buf[1].pfn = virt_to_phys((void *)((ulong)
-			rndis_msg + pkt->page_buf[0].len)) >> PAGE_SHIFT;
-		pkt->page_buf[1].offset = 0;
-		pkt->page_buf[1].len = rndis_msg_size - pkt->page_buf[0].len;
-	}
-
-	return netvsc_send(dev, pkt);
-}
-- 
cgit v1.2.2


From 4a0e70ae5e3858052f6d91564bf3484f1eb91dc7 Mon Sep 17 00:00:00 2001
From: KY Srinivasan <kys@microsoft.com>
Date: Sat, 8 Mar 2014 19:23:15 -0800
Subject: Drivers: net: hyperv: Enable offloads on the host

Prior to enabling guest side offloads, enable the offloads on the host.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/hyperv/hyperv_net.h   | 55 +++++++++++++++++++++++++++
 drivers/net/hyperv/rndis_filter.c | 80 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 135 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/hyperv/hyperv_net.h b/drivers/net/hyperv/hyperv_net.h
index 694bf7cada90..8bc4e766589b 100644
--- a/drivers/net/hyperv/hyperv_net.h
+++ b/drivers/net/hyperv/hyperv_net.h
@@ -721,6 +721,61 @@ struct ndis_pkt_8021q_info {
 	};
 };
 
+struct ndis_oject_header {
+	u8 type;
+	u8 revision;
+	u16 size;
+};
+
+#define NDIS_OBJECT_TYPE_DEFAULT	0x80
+#define NDIS_OFFLOAD_PARAMETERS_REVISION_3 3
+#define NDIS_OFFLOAD_PARAMETERS_NO_CHANGE 0
+#define NDIS_OFFLOAD_PARAMETERS_LSOV2_DISABLED 1
+#define NDIS_OFFLOAD_PARAMETERS_LSOV2_ENABLED  2
+#define NDIS_OFFLOAD_PARAMETERS_LSOV1_ENABLED  2
+#define NDIS_OFFLOAD_PARAMETERS_RSC_DISABLED 1
+#define NDIS_OFFLOAD_PARAMETERS_RSC_ENABLED 2
+#define NDIS_OFFLOAD_PARAMETERS_TX_RX_DISABLED 1
+#define NDIS_OFFLOAD_PARAMETERS_TX_ENABLED_RX_DISABLED 2
+#define NDIS_OFFLOAD_PARAMETERS_RX_ENABLED_TX_DISABLED 3
+#define NDIS_OFFLOAD_PARAMETERS_TX_RX_ENABLED 4
+
+/*
+ * New offload OIDs for NDIS 6
+ */
+#define OID_TCP_OFFLOAD_CURRENT_CONFIG 0xFC01020B /* query only */
+#define OID_TCP_OFFLOAD_PARAMETERS 0xFC01020C		/* set only */
+#define OID_TCP_OFFLOAD_HARDWARE_CAPABILITIES 0xFC01020D/* query only */
+#define OID_TCP_CONNECTION_OFFLOAD_CURRENT_CONFIG 0xFC01020E /* query only */
+#define OID_TCP_CONNECTION_OFFLOAD_HARDWARE_CAPABILITIES 0xFC01020F /* query */
+#define OID_OFFLOAD_ENCAPSULATION 0x0101010A /* set/query */
+
+struct ndis_offload_params {
+	struct ndis_oject_header header;
+	u8 ip_v4_csum;
+	u8 tcp_ip_v4_csum;
+	u8 udp_ip_v4_csum;
+	u8 tcp_ip_v6_csum;
+	u8 udp_ip_v6_csum;
+	u8 lso_v1;
+	u8 ip_sec_v1;
+	u8 lso_v2_ipv4;
+	u8 lso_v2_ipv6;
+	u8 tcp_connection_ip_v4;
+	u8 tcp_connection_ip_v6;
+	u32 flags;
+	u8 ip_sec_v2;
+	u8 ip_sec_v2_ip_v4;
+	struct {
+		u8 rsc_ip_v4;
+		u8 rsc_ip_v6;
+	};
+	struct {
+		u8 encapsulated_packet_task_offload;
+		u8 encapsulation_types;
+	};
+};
+
 #define NDIS_VLAN_PPI_SIZE (sizeof(struct rndis_per_packet_info) + \
 		sizeof(struct ndis_pkt_8021q_info))
 
diff --git a/drivers/net/hyperv/rndis_filter.c b/drivers/net/hyperv/rndis_filter.c
index eaa149950af7..42bfb3a11efd 100644
--- a/drivers/net/hyperv/rndis_filter.c
+++ b/drivers/net/hyperv/rndis_filter.c
@@ -607,6 +607,61 @@ cleanup:
 	return ret;
 }
 
+int rndis_filter_set_offload_params(struct hv_device *hdev,
+				struct ndis_offload_params *req_offloads)
+{
+	struct netvsc_device *nvdev = hv_get_drvdata(hdev);
+	struct rndis_device *rdev = nvdev->extension;
+	struct net_device *ndev = nvdev->ndev;
+	struct rndis_request *request;
+	struct rndis_set_request *set;
+	struct ndis_offload_params *offload_params;
+	struct rndis_set_complete *set_complete;
+	u32 extlen = sizeof(struct ndis_offload_params);
+	int ret, t;
+
+	request = get_rndis_request(rdev, RNDIS_MSG_SET,
+		RNDIS_MESSAGE_SIZE(struct rndis_set_request) + extlen);
+	if (!request)
+		return -ENOMEM;
+
+	set = &request->request_msg.msg.set_req;
+	set->oid = OID_TCP_OFFLOAD_PARAMETERS;
+	set->info_buflen = extlen;
+	set->info_buf_offset = sizeof(struct rndis_set_request);
+	set->dev_vc_handle = 0;
+
+	offload_params = (struct ndis_offload_params *)((ulong)set +
+				set->info_buf_offset);
+	*offload_params = *req_offloads;
+	offload_params->header.type = NDIS_OBJECT_TYPE_DEFAULT;
+	offload_params->header.revision = NDIS_OFFLOAD_PARAMETERS_REVISION_3;
+	offload_params->header.size = extlen;
+
+	ret = rndis_filter_send_request(rdev, request);
+	if (ret != 0)
+		goto cleanup;
+
+	t = wait_for_completion_timeout(&request->wait_event, 5*HZ);
+	if (t == 0) {
+		netdev_err(ndev, "timeout before we got aOFFLOAD set response...\n");
+		/* can't put_rndis_request, since we may still receive a
+		 * send-completion.
+		 */
+		return -EBUSY;
+	} else {
+		set_complete = &request->response_msg.msg.set_complete;
+		if (set_complete->status != RNDIS_STATUS_SUCCESS) {
+			netdev_err(ndev, "Fail to set MAC on host side:0x%x\n",
+				   set_complete->status);
+			ret = -EINVAL;
+		}
+	}
+
+cleanup:
+	put_rndis_request(rdev, request);
+	return ret;
+}
 
 static int rndis_filter_query_device_link_status(struct rndis_device *dev)
 {
@@ -807,6 +862,7 @@ int rndis_filter_device_add(struct hv_device *dev,
 	struct netvsc_device *net_device;
 	struct rndis_device *rndis_device;
 	struct netvsc_device_info *device_info = additional_info;
+	struct ndis_offload_params offloads;
 
 	rndis_device = get_rndis_device();
 	if (!rndis_device)
@@ -846,6 +902,26 @@ int rndis_filter_device_add(struct hv_device *dev,
 
 	memcpy(device_info->mac_adr, rndis_device->hw_mac_adr, ETH_ALEN);
 
+	/* Turn on the offloads; the host supports all of the relevant
+	 * offloads.
+	 */
+	memset(&offloads, 0, sizeof(struct ndis_offload_params));
+	/* A value of zero means "no change"; now turn on what we
+	 * want.
+	 */
+	offloads.ip_v4_csum = NDIS_OFFLOAD_PARAMETERS_TX_RX_ENABLED;
+	offloads.tcp_ip_v4_csum = NDIS_OFFLOAD_PARAMETERS_TX_RX_ENABLED;
+	offloads.udp_ip_v4_csum = NDIS_OFFLOAD_PARAMETERS_TX_RX_ENABLED;
+	offloads.tcp_ip_v6_csum = NDIS_OFFLOAD_PARAMETERS_TX_RX_ENABLED;
+	offloads.udp_ip_v6_csum = NDIS_OFFLOAD_PARAMETERS_TX_RX_ENABLED;
+	offloads.lso_v2_ipv4 = NDIS_OFFLOAD_PARAMETERS_LSOV2_ENABLED;
+
+
+	ret = rndis_filter_set_offload_params(dev, &offloads);
+	if (ret)
+		goto err_dev_remv;
+
+
 	rndis_filter_query_device_link_status(rndis_device);
 
 	device_info->link_state = rndis_device->link_state;
@@ -855,6 +931,10 @@ int rndis_filter_device_add(struct hv_device *dev,
 		 device_info->link_state ? "down" : "up");
 
 	return ret;
+
+err_dev_remv:
+	rndis_filter_device_remove(dev);
+	return ret;
 }
 
 void rndis_filter_device_remove(struct hv_device *dev)
-- 
cgit v1.2.2


From e3d605ed441cf4d113f9a1cf9e1b3f7cabe0d781 Mon Sep 17 00:00:00 2001
From: KY Srinivasan <kys@microsoft.com>
Date: Sat, 8 Mar 2014 19:23:16 -0800
Subject: Drivers: net: hyperv: Enable receive side IP checksum offload

Enable receive side checksum offload.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/hyperv/hyperv_net.h   | 33 ++++++++++++++++++++++++++++++++-
 drivers/net/hyperv/netvsc_drv.c   | 19 +++++++++++++++----
 drivers/net/hyperv/rndis_filter.c |  4 +++-
 3 files changed, 50 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/hyperv/hyperv_net.h b/drivers/net/hyperv/hyperv_net.h
index 8bc4e766589b..faeb74623fbd 100644
--- a/drivers/net/hyperv/hyperv_net.h
+++ b/drivers/net/hyperv/hyperv_net.h
@@ -30,6 +30,7 @@
 
 /* Fwd declaration */
 struct hv_netvsc_packet;
+struct ndis_tcp_ip_checksum_info;
 
 /* Represent the xfer page packet which contains 1 or more netvsc packet */
 struct xferpage_packet {
@@ -117,7 +118,8 @@ int netvsc_send(struct hv_device *device,
 void netvsc_linkstatus_callback(struct hv_device *device_obj,
 				unsigned int status);
 int netvsc_recv_callback(struct hv_device *device_obj,
-			struct hv_netvsc_packet *packet);
+			struct hv_netvsc_packet *packet,
+			struct ndis_tcp_ip_checksum_info *csum_info);
 int rndis_filter_open(struct hv_device *dev);
 int rndis_filter_close(struct hv_device *dev);
 int rndis_filter_device_add(struct hv_device *dev,
@@ -776,9 +778,38 @@ struct ndis_offload_params {
 	};
 };
 
+struct ndis_tcp_ip_checksum_info {
+	union {
+		struct {
+			u32 is_ipv4:1;
+			u32 is_ipv6:1;
+			u32 tcp_checksum:1;
+			u32 udp_checksum:1;
+			u32 ip_header_checksum:1;
+			u32 reserved:11;
+			u32 tcp_header_offset:10;
+		} transmit;
+		struct {
+			u32 tcp_checksum_failed:1;
+			u32 udp_checksum_failed:1;
+			u32 ip_checksum_failed:1;
+			u32 tcp_checksum_succeeded:1;
+			u32 udp_checksum_succeeded:1;
+			u32 ip_checksum_succeeded:1;
+			u32 loopback:1;
+			u32 tcp_checksum_value_invalid:1;
+			u32 ip_checksum_value_invalid:1;
+		} receive;
+		u32  value;
+	};
+};
+
 #define NDIS_VLAN_PPI_SIZE (sizeof(struct rndis_per_packet_info) + \
 		sizeof(struct ndis_pkt_8021q_info))
 
+#define NDIS_CSUM_PPI_SIZE (sizeof(struct rndis_per_packet_info) + \
+		sizeof(struct ndis_tcp_ip_checksum_info))
+
 /* Format of Information buffer passed in a SetRequest for the OID */
 /* OID_GEN_RNDIS_CONFIG_PARAMETER. */
 struct rndis_config_parameter_info {
diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c
index 7010c0630d24..9bee0650c7ca 100644
--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -391,7 +391,8 @@ void netvsc_linkstatus_callback(struct hv_device *device_obj,
  * "wire" on the specified device.
  */
 int netvsc_recv_callback(struct hv_device *device_obj,
-				struct hv_netvsc_packet *packet)
+				struct hv_netvsc_packet *packet,
+				struct ndis_tcp_ip_checksum_info *csum_info)
 {
 	struct net_device *net;
 	struct sk_buff *skb;
@@ -418,7 +419,17 @@ int netvsc_recv_callback(struct hv_device *device_obj,
 		packet->total_data_buflen);
 
 	skb->protocol = eth_type_trans(skb, net);
-	skb->ip_summed = CHECKSUM_NONE;
+	if (csum_info) {
+		/* We only look at the IP checksum here.
+		 * Should we be dropping the packet if checksum
+		 * failed? How do we deal with other checksums - TCP/UDP?
+		 */
+		if (csum_info->receive.ip_checksum_succeeded)
+			skb->ip_summed = CHECKSUM_UNNECESSARY;
+		else
+			skb->ip_summed = CHECKSUM_NONE;
+	}
+
 	if (packet->vlan_tci & VLAN_TAG_PRESENT)
 		__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q),
 				       packet->vlan_tci);
@@ -578,8 +589,8 @@ static int netvsc_probe(struct hv_device *dev,
 	net->netdev_ops = &device_ops;
 
 	/* TODO: Add GSO and Checksum offload */
-	net->hw_features = NETIF_F_SG;
-	net->features = NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_SG;
+	net->hw_features = NETIF_F_RXCSUM | NETIF_F_SG;
+	net->features = NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_SG | NETIF_F_RXCSUM;
 
 	SET_ETHTOOL_OPS(net, &ethtool_ops);
 	SET_NETDEV_DEV(net, &dev->device);
diff --git a/drivers/net/hyperv/rndis_filter.c b/drivers/net/hyperv/rndis_filter.c
index 42bfb3a11efd..54553df74cd2 100644
--- a/drivers/net/hyperv/rndis_filter.c
+++ b/drivers/net/hyperv/rndis_filter.c
@@ -350,6 +350,7 @@ static void rndis_filter_receive_data(struct rndis_device *dev,
 	struct rndis_packet *rndis_pkt;
 	u32 data_offset;
 	struct ndis_pkt_8021q_info *vlan;
+	struct ndis_tcp_ip_checksum_info *csum_info;
 
 	rndis_pkt = &msg->msg.pkt;
 
@@ -388,7 +389,8 @@ static void rndis_filter_receive_data(struct rndis_device *dev,
 		pkt->vlan_tci = 0;
 	}
 
-	netvsc_recv_callback(dev->net_dev->dev, pkt);
+	csum_info = rndis_get_ppi(rndis_pkt, TCPIP_CHKSUM_PKTINFO);
+	netvsc_recv_callback(dev->net_dev->dev, pkt, csum_info);
 }
 
 int rndis_filter_receive(struct hv_device *dev,
-- 
cgit v1.2.2


From 08cd04bf6d5b14ea90845b596d371bfa33eaba06 Mon Sep 17 00:00:00 2001
From: KY Srinivasan <kys@microsoft.com>
Date: Sat, 8 Mar 2014 19:23:17 -0800
Subject: Drivers: net: hyperv: Enable send side checksum offload

Enable send side checksum offload.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/hyperv/hyperv_net.h | 10 ++++++
 drivers/net/hyperv/netvsc_drv.c | 69 +++++++++++++++++++++++++++++++++++++++--
 2 files changed, 77 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/hyperv/hyperv_net.h b/drivers/net/hyperv/hyperv_net.h
index faeb74623fbd..4cf238234321 100644
--- a/drivers/net/hyperv/hyperv_net.h
+++ b/drivers/net/hyperv/hyperv_net.h
@@ -1035,6 +1035,16 @@ struct rndis_message {
 #define NDIS_PACKET_TYPE_FUNCTIONAL	0x00000400
 #define NDIS_PACKET_TYPE_MAC_FRAME	0x00000800
 
+#define INFO_IPV4       2
+#define INFO_IPV6       4
+#define INFO_TCP        2
+#define INFO_UDP        4
+
+#define TRANSPORT_INFO_NOT_IP   0
+#define TRANSPORT_INFO_IPV4_TCP ((INFO_IPV4 << 16) | INFO_TCP)
+#define TRANSPORT_INFO_IPV4_UDP ((INFO_IPV4 << 16) | INFO_UDP)
+#define TRANSPORT_INFO_IPV6_TCP ((INFO_IPV6 << 16) | INFO_TCP)
+#define TRANSPORT_INFO_IPV6_UDP ((INFO_IPV6 << 16) | INFO_UDP)
 
 
 #endif /* _HYPERV_NET_H */
diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c
index 9bee0650c7ca..697837537ccb 100644
--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -257,6 +257,35 @@ static int netvsc_get_slots(struct sk_buff *skb)
 	return slots + frag_slots;
 }
 
+static u32 get_net_transport_info(struct sk_buff *skb, u32 *trans_off)
+{
+	u32 ret_val = TRANSPORT_INFO_NOT_IP;
+
+	if ((eth_hdr(skb)->h_proto != htons(ETH_P_IP)) &&
+		(eth_hdr(skb)->h_proto != htons(ETH_P_IPV6))) {
+		goto not_ip;
+	}
+
+	*trans_off = skb_transport_offset(skb);
+
+	if ((eth_hdr(skb)->h_proto == htons(ETH_P_IP))) {
+		struct iphdr *iphdr = ip_hdr(skb);
+
+		if (iphdr->protocol == IPPROTO_TCP)
+			ret_val = TRANSPORT_INFO_IPV4_TCP;
+		else if (iphdr->protocol == IPPROTO_UDP)
+			ret_val = TRANSPORT_INFO_IPV4_UDP;
+	} else {
+		if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
+			ret_val = TRANSPORT_INFO_IPV6_TCP;
+		else if (ipv6_hdr(skb)->nexthdr == IPPROTO_UDP)
+			ret_val = TRANSPORT_INFO_IPV6_UDP;
+	}
+
+not_ip:
+	return ret_val;
+}
+
 static int netvsc_start_xmit(struct sk_buff *skb, struct net_device *net)
 {
 	struct net_device_context *net_device_ctx = netdev_priv(net);
@@ -268,6 +297,10 @@ static int netvsc_start_xmit(struct sk_buff *skb, struct net_device *net)
 	u32 rndis_msg_size;
 	bool isvlan;
 	struct rndis_per_packet_info *ppi;
+	struct ndis_tcp_ip_checksum_info *csum_info;
+	int  hdr_offset;
+	u32 net_trans_info;
+
 
 	/* We will atmost need two pages to describe the rndis
 	 * header. We can only transmit MAX_PAGE_BUFFER_COUNT number
@@ -335,6 +368,37 @@ static int netvsc_start_xmit(struct sk_buff *skb, struct net_device *net)
 				VLAN_PRIO_SHIFT;
 	}
 
+	net_trans_info = get_net_transport_info(skb, &hdr_offset);
+	if (net_trans_info == TRANSPORT_INFO_NOT_IP)
+		goto do_send;
+
+	/*
+	 * Setup the sendside checksum offload only if this is not a
+	 * GSO packet.
+	 */
+	if (skb_is_gso(skb))
+		goto do_send;
+
+	rndis_msg_size += NDIS_CSUM_PPI_SIZE;
+	ppi = init_ppi_data(rndis_msg, NDIS_CSUM_PPI_SIZE,
+			    TCPIP_CHKSUM_PKTINFO);
+
+	csum_info = (struct ndis_tcp_ip_checksum_info *)((void *)ppi +
+			ppi->ppi_offset);
+
+	if (net_trans_info & (INFO_IPV4 << 16))
+		csum_info->transmit.is_ipv4 = 1;
+	else
+		csum_info->transmit.is_ipv6 = 1;
+
+	if (net_trans_info & INFO_TCP) {
+		csum_info->transmit.tcp_checksum = 1;
+		csum_info->transmit.tcp_header_offset = hdr_offset;
+	} else if (net_trans_info & INFO_UDP) {
+		csum_info->transmit.udp_checksum = 1;
+	}
+
+do_send:
 	/* Start filling in the page buffers with the rndis hdr */
 	rndis_msg->msg_len += rndis_msg_size;
 	packet->page_buf_cnt = init_page_array(rndis_msg, rndis_msg_size,
@@ -589,8 +653,9 @@ static int netvsc_probe(struct hv_device *dev,
 	net->netdev_ops = &device_ops;
 
 	/* TODO: Add GSO and Checksum offload */
-	net->hw_features = NETIF_F_RXCSUM | NETIF_F_SG;
-	net->features = NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_SG | NETIF_F_RXCSUM;
+	net->hw_features = NETIF_F_RXCSUM | NETIF_F_SG | NETIF_F_IP_CSUM;
+	net->features = NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_SG | NETIF_F_RXCSUM |
+			NETIF_F_IP_CSUM;
 
 	SET_ETHTOOL_OPS(net, &ethtool_ops);
 	SET_NETDEV_DEV(net, &dev->device);
-- 
cgit v1.2.2


From 77bf5487946254798ed7f265877939c703189f1e Mon Sep 17 00:00:00 2001
From: KY Srinivasan <kys@microsoft.com>
Date: Sat, 8 Mar 2014 19:23:18 -0800
Subject: Drivers: net: hyperv: Enable large send offload

Enable segmentation offload.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/hyperv/hyperv_net.h | 40 ++++++++++++++++++++++++++++++++++++++++
 drivers/net/hyperv/netvsc_drv.c | 38 ++++++++++++++++++++++++++++++++++----
 2 files changed, 74 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/hyperv/hyperv_net.h b/drivers/net/hyperv/hyperv_net.h
index 4cf238234321..7d06b4959383 100644
--- a/drivers/net/hyperv/hyperv_net.h
+++ b/drivers/net/hyperv/hyperv_net.h
@@ -742,6 +742,10 @@ struct ndis_oject_header {
 #define NDIS_OFFLOAD_PARAMETERS_RX_ENABLED_TX_DISABLED 3
 #define NDIS_OFFLOAD_PARAMETERS_TX_RX_ENABLED 4
 
+#define NDIS_TCP_LARGE_SEND_OFFLOAD_V2_TYPE	1
+#define NDIS_TCP_LARGE_SEND_OFFLOAD_IPV4	0
+#define NDIS_TCP_LARGE_SEND_OFFLOAD_IPV6	1
+
 /*
  * New offload OIDs for NDIS 6
  */
@@ -804,12 +808,48 @@ struct ndis_tcp_ip_checksum_info {
 	};
 };
 
+struct ndis_tcp_lso_info {
+	union {
+		struct {
+			u32 unused:30;
+			u32 type:1;
+			u32 reserved2:1;
+		} transmit;
+		struct {
+			u32 mss:20;
+			u32 tcp_header_offset:10;
+			u32 type:1;
+			u32 reserved2:1;
+		} lso_v1_transmit;
+		struct {
+			u32 tcp_payload:30;
+			u32 type:1;
+			u32 reserved2:1;
+		} lso_v1_transmit_complete;
+		struct {
+			u32 mss:20;
+			u32 tcp_header_offset:10;
+			u32 type:1;
+			u32 ip_version:1;
+		} lso_v2_transmit;
+		struct {
+			u32 reserved:30;
+			u32 type:1;
+			u32 reserved2:1;
+		} lso_v2_transmit_complete;
+		u32  value;
+	};
+};
+
 #define NDIS_VLAN_PPI_SIZE (sizeof(struct rndis_per_packet_info) + \
 		sizeof(struct ndis_pkt_8021q_info))
 
 #define NDIS_CSUM_PPI_SIZE (sizeof(struct rndis_per_packet_info) + \
 		sizeof(struct ndis_tcp_ip_checksum_info))
 
+#define NDIS_LSO_PPI_SIZE (sizeof(struct rndis_per_packet_info) + \
+		sizeof(struct ndis_tcp_lso_info))
+
 /* Format of Information buffer passed in a SetRequest for the OID */
 /* OID_GEN_RNDIS_CONFIG_PARAMETER. */
 struct rndis_config_parameter_info {
diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c
index 697837537ccb..3d069901e6d9 100644
--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -298,6 +298,7 @@ static int netvsc_start_xmit(struct sk_buff *skb, struct net_device *net)
 	bool isvlan;
 	struct rndis_per_packet_info *ppi;
 	struct ndis_tcp_ip_checksum_info *csum_info;
+	struct ndis_tcp_lso_info *lso_info;
 	int  hdr_offset;
 	u32 net_trans_info;
 
@@ -377,7 +378,7 @@ static int netvsc_start_xmit(struct sk_buff *skb, struct net_device *net)
 	 * GSO packet.
 	 */
 	if (skb_is_gso(skb))
-		goto do_send;
+		goto do_lso;
 
 	rndis_msg_size += NDIS_CSUM_PPI_SIZE;
 	ppi = init_ppi_data(rndis_msg, NDIS_CSUM_PPI_SIZE,
@@ -397,6 +398,35 @@ static int netvsc_start_xmit(struct sk_buff *skb, struct net_device *net)
 	} else if (net_trans_info & INFO_UDP) {
 		csum_info->transmit.udp_checksum = 1;
 	}
+	goto do_send;
+
+do_lso:
+	rndis_msg_size += NDIS_LSO_PPI_SIZE;
+	ppi = init_ppi_data(rndis_msg, NDIS_LSO_PPI_SIZE,
+			    TCP_LARGESEND_PKTINFO);
+
+	lso_info = (struct ndis_tcp_lso_info *)((void *)ppi +
+			ppi->ppi_offset);
+
+	lso_info->lso_v2_transmit.type = NDIS_TCP_LARGE_SEND_OFFLOAD_V2_TYPE;
+	if (net_trans_info & (INFO_IPV4 << 16)) {
+		lso_info->lso_v2_transmit.ip_version =
+			NDIS_TCP_LARGE_SEND_OFFLOAD_IPV4;
+		ip_hdr(skb)->tot_len = 0;
+		ip_hdr(skb)->check = 0;
+		tcp_hdr(skb)->check =
+		~csum_tcpudp_magic(ip_hdr(skb)->saddr,
+				   ip_hdr(skb)->daddr, 0, IPPROTO_TCP, 0);
+	} else {
+		lso_info->lso_v2_transmit.ip_version =
+			NDIS_TCP_LARGE_SEND_OFFLOAD_IPV6;
+		ipv6_hdr(skb)->payload_len = 0;
+		tcp_hdr(skb)->check =
+		~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
+				&ipv6_hdr(skb)->daddr, 0, IPPROTO_TCP, 0);
+	}
+	lso_info->lso_v2_transmit.tcp_header_offset = hdr_offset;
+	lso_info->lso_v2_transmit.mss = skb_shinfo(skb)->gso_size;
 
 do_send:
 	/* Start filling in the page buffers with the rndis hdr */
@@ -652,10 +682,10 @@ static int netvsc_probe(struct hv_device *dev,
 
 	net->netdev_ops = &device_ops;
 
-	/* TODO: Add GSO and Checksum offload */
-	net->hw_features = NETIF_F_RXCSUM | NETIF_F_SG | NETIF_F_IP_CSUM;
+	net->hw_features = NETIF_F_RXCSUM | NETIF_F_SG | NETIF_F_IP_CSUM |
+				NETIF_F_TSO;
 	net->features = NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_SG | NETIF_F_RXCSUM |
-			NETIF_F_IP_CSUM;
+			NETIF_F_IP_CSUM | NETIF_F_TSO;
 
 	SET_ETHTOOL_OPS(net, &ethtool_ops);
 	SET_NETDEV_DEV(net, &dev->device);
-- 
cgit v1.2.2


From 99d3016de4f2a29635f5382b0e9bd0e5f2151487 Mon Sep 17 00:00:00 2001
From: Haiyang Zhang <haiyangz@microsoft.com>
Date: Sun, 9 Mar 2014 16:10:59 -0700
Subject: hyperv: Change the receive buffer size for legacy hosts

Due to a bug in the Hyper-V host verion 2008R2, we need to use a slightly smaller
receive buffer size, otherwise the buffer will not be accepted by the legacy hosts.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/hyperv/hyperv_net.h | 1 +
 drivers/net/hyperv/netvsc.c     | 6 +++++-
 2 files changed, 6 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/hyperv/hyperv_net.h b/drivers/net/hyperv/hyperv_net.h
index 7d06b4959383..13010b4dae5b 100644
--- a/drivers/net/hyperv/hyperv_net.h
+++ b/drivers/net/hyperv/hyperv_net.h
@@ -513,6 +513,7 @@ struct nvsp_message {
 #define NETVSC_MTU 65536
 
 #define NETVSC_RECEIVE_BUFFER_SIZE		(1024*1024*16)	/* 16MB */
+#define NETVSC_RECEIVE_BUFFER_SIZE_LEGACY	(1024*1024*15)  /* 15MB */
 
 #define NETVSC_RECEIVE_BUFFER_ID		0xcafe
 
diff --git a/drivers/net/hyperv/netvsc.c b/drivers/net/hyperv/netvsc.c
index 1a0280dcba7e..daddea2654ce 100644
--- a/drivers/net/hyperv/netvsc.c
+++ b/drivers/net/hyperv/netvsc.c
@@ -365,6 +365,11 @@ static int netvsc_connect_vsp(struct hv_device *device)
 		goto cleanup;
 
 	/* Post the big receive buffer to NetVSP */
+	if (net_device->nvsp_version <= NVSP_PROTOCOL_VERSION_2)
+		net_device->recv_buf_size = NETVSC_RECEIVE_BUFFER_SIZE_LEGACY;
+	else
+		net_device->recv_buf_size = NETVSC_RECEIVE_BUFFER_SIZE;
+
 	ret = netvsc_init_recv_buf(device);
 
 cleanup:
@@ -898,7 +903,6 @@ int netvsc_device_add(struct hv_device *device, void *additional_info)
 	ndev = net_device->ndev;
 
 	/* Initialize the NetVSC channel extension */
-	net_device->recv_buf_size = NETVSC_RECEIVE_BUFFER_SIZE;
 	spin_lock_init(&net_device->recv_pkt_list_lock);
 
 	INIT_LIST_HEAD(&net_device->recv_pkt_list);
-- 
cgit v1.2.2


From 8dc43ddc9fe0af3a555af235a69a398c3eba2639 Mon Sep 17 00:00:00 2001
From: Tobias Klauser <tklauser@distanz.ch>
Date: Mon, 10 Mar 2014 13:12:23 +0100
Subject: net: eth: cpsw: Use net_device_stats from struct net_device

Instead of using an own copy of struct net_device_stats in struct
cpsw_priv, use stats from struct net_device. Also remove the thus
unnecessary .ndo_get_stats function, as it just returns dev->stats,
which is the default.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/ti/cpsw.c | 24 ++++++++----------------
 1 file changed, 8 insertions(+), 16 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 53f85dd3bbad..543a0813c9e0 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -378,7 +378,6 @@ struct cpsw_priv {
 	u32				version;
 	u32				coal_intvl;
 	u32				bus_freq_mhz;
-	struct net_device_stats		stats;
 	int				rx_packet_max;
 	int				host_port;
 	struct clk			*clk;
@@ -673,8 +672,8 @@ static void cpsw_tx_handler(void *token, int len, int status)
 	if (unlikely(netif_queue_stopped(ndev)))
 		netif_wake_queue(ndev);
 	cpts_tx_timestamp(priv->cpts, skb);
-	priv->stats.tx_packets++;
-	priv->stats.tx_bytes += len;
+	ndev->stats.tx_packets++;
+	ndev->stats.tx_bytes += len;
 	dev_kfree_skb_any(skb);
 }
 
@@ -700,10 +699,10 @@ static void cpsw_rx_handler(void *token, int len, int status)
 		cpts_rx_timestamp(priv->cpts, skb);
 		skb->protocol = eth_type_trans(skb, ndev);
 		netif_receive_skb(skb);
-		priv->stats.rx_bytes += len;
-		priv->stats.rx_packets++;
+		ndev->stats.rx_bytes += len;
+		ndev->stats.rx_packets++;
 	} else {
-		priv->stats.rx_dropped++;
+		ndev->stats.rx_dropped++;
 		new_skb = skb;
 	}
 
@@ -1313,7 +1312,7 @@ static netdev_tx_t cpsw_ndo_start_xmit(struct sk_buff *skb,
 
 	if (skb_padto(skb, CPSW_MIN_PACKET_SIZE)) {
 		cpsw_err(priv, tx_err, "packet pad failed\n");
-		priv->stats.tx_dropped++;
+		ndev->stats.tx_dropped++;
 		return NETDEV_TX_OK;
 	}
 
@@ -1337,7 +1336,7 @@ static netdev_tx_t cpsw_ndo_start_xmit(struct sk_buff *skb,
 
 	return NETDEV_TX_OK;
 fail:
-	priv->stats.tx_dropped++;
+	ndev->stats.tx_dropped++;
 	netif_stop_queue(ndev);
 	return NETDEV_TX_BUSY;
 }
@@ -1501,7 +1500,7 @@ static void cpsw_ndo_tx_timeout(struct net_device *ndev)
 	struct cpsw_priv *priv = netdev_priv(ndev);
 
 	cpsw_err(priv, tx_err, "transmit timeout, restarting dma\n");
-	priv->stats.tx_errors++;
+	ndev->stats.tx_errors++;
 	cpsw_intr_disable(priv);
 	cpdma_ctlr_int_ctrl(priv->dma, false);
 	cpdma_chan_stop(priv->txch);
@@ -1540,12 +1539,6 @@ static int cpsw_ndo_set_mac_address(struct net_device *ndev, void *p)
 	return 0;
 }
 
-static struct net_device_stats *cpsw_ndo_get_stats(struct net_device *ndev)
-{
-	struct cpsw_priv *priv = netdev_priv(ndev);
-	return &priv->stats;
-}
-
 #ifdef CONFIG_NET_POLL_CONTROLLER
 static void cpsw_ndo_poll_controller(struct net_device *ndev)
 {
@@ -1638,7 +1631,6 @@ static const struct net_device_ops cpsw_netdev_ops = {
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_tx_timeout		= cpsw_ndo_tx_timeout,
-	.ndo_get_stats		= cpsw_ndo_get_stats,
 	.ndo_set_rx_mode	= cpsw_ndo_set_rx_mode,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= cpsw_ndo_poll_controller,
-- 
cgit v1.2.2


From fcb308d52991cbdb6231ab0e7ec3e5d1c61b3a20 Mon Sep 17 00:00:00 2001
From: hayeswang <hayeswang@realtek.com>
Date: Tue, 11 Mar 2014 10:20:32 +0800
Subject: r8152: add skb_cow_head

Call skb_cow_head() before editing the tx packet header. The header
would be reallocated if it is shared.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/r8152.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index c7ef30dee1b9..a90a7eb91f1c 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -1376,6 +1376,11 @@ static int msdn_giant_send_check(struct sk_buff *skb)
 {
 	const struct ipv6hdr *ipv6h;
 	struct tcphdr *th;
+	int ret;
+
+	ret = skb_cow_head(skb, 0);
+	if (ret)
+		return ret;
 
 	ipv6h = ipv6_hdr(skb);
 	th = tcp_hdr(skb);
@@ -1383,7 +1388,7 @@ static int msdn_giant_send_check(struct sk_buff *skb)
 	th->check = 0;
 	th->check = ~tcp_v6_check(0, &ipv6h->saddr, &ipv6h->daddr, 0);
 
-	return 0;
+	return ret;
 }
 
 static int r8152_tx_csum(struct r8152 *tp, struct tx_desc *desc,
@@ -1412,8 +1417,11 @@ static int r8152_tx_csum(struct r8152 *tp, struct tx_desc *desc,
 			break;
 
 		case htons(ETH_P_IPV6):
+			if (msdn_giant_send_check(skb)) {
+				ret = TX_CSUM_TSO;
+				goto unavailable;
+			}
 			opts1 |= GTSENDV6;
-			msdn_giant_send_check(skb);
 			break;
 
 		default:
-- 
cgit v1.2.2


From 82e5a649453a3cf23516277abb84273768a1592b Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Mon, 10 Mar 2014 15:22:03 +0200
Subject: iwlwifi: dvm: take mutex when sending SYNC BT config command

There is a flow in which we send the host command in SYNC
mode, but we don't take priv->mutex.

Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1046495

Cc: <stable@vger.kernel.org>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/dvm/main.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/dvm/main.c b/drivers/net/wireless/iwlwifi/dvm/main.c
index ba1b1ea54252..ea7e70cb34f0 100644
--- a/drivers/net/wireless/iwlwifi/dvm/main.c
+++ b/drivers/net/wireless/iwlwifi/dvm/main.c
@@ -252,13 +252,17 @@ static void iwl_bg_bt_runtime_config(struct work_struct *work)
 	struct iwl_priv *priv =
 		container_of(work, struct iwl_priv, bt_runtime_config);
 
+	mutex_lock(&priv->mutex);
 	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
-		return;
+		goto out;
 
 	/* dont send host command if rf-kill is on */
 	if (!iwl_is_ready_rf(priv))
-		return;
+		goto out;
+
 	iwlagn_send_advance_bt_config(priv);
+out:
+	mutex_unlock(&priv->mutex);
 }
 
 static void iwl_bg_bt_full_concurrency(struct work_struct *work)
-- 
cgit v1.2.2


From b9fae2d54c9ffceed7b57bfc9d4acb0de40b4ba8 Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Mon, 17 Feb 2014 11:24:10 +0200
Subject: iwlwifi: mvm: BT Coex add support for Co-running block

7265 features a new calibration which is called antenna
coupling. The purpose of this calibration (which isn't
really a calibration), is to measure the isolation between
the antennas and that can give us useful information for
the Coex modules.

With this information, we can tune the LookUpTables (LUTs)
that define the BT / WiFi contention policy.

The LUTs currently contain dummy values - but they will be
updated soon.

While at it, change the current code to stop duplicate the
host command while sending. This was needed back then, when
the command was short enough to be allocated on the stack.
Since then, the command grew a lot and is now allocated on
the heap - hence we can use the NOCOPY option instead.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/bt-coex.c        | 291 +++++++++++++++++++++-
 drivers/net/wireless/iwlwifi/mvm/constants.h      |   1 +
 drivers/net/wireless/iwlwifi/mvm/debugfs.c        |   3 +
 drivers/net/wireless/iwlwifi/mvm/fw-api-bt-coex.h |   2 +
 drivers/net/wireless/iwlwifi/mvm/fw-api.h         |   1 +
 drivers/net/wireless/iwlwifi/mvm/mvm.h            |   5 +
 drivers/net/wireless/iwlwifi/mvm/ops.c            |   3 +
 7 files changed, 303 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/bt-coex.c b/drivers/net/wireless/iwlwifi/mvm/bt-coex.c
index 38a54a3fde34..4ae3c850b57e 100644
--- a/drivers/net/wireless/iwlwifi/mvm/bt-coex.c
+++ b/drivers/net/wireless/iwlwifi/mvm/bt-coex.c
@@ -305,6 +305,215 @@ static const __le32 iwl_bt_mprio_lut[BT_COEX_MULTI_PRIO_LUT_SIZE] = {
 	cpu_to_le32(0x33113311),
 };
 
+struct corunning_block_luts {
+	u8 range;
+	__le32 lut20[BT_COEX_CORUN_LUT_SIZE];
+};
+
+/*
+ * Ranges for the antenna coupling calibration / co-running block LUT:
+ *		LUT0: [ 0, 12[
+ *		LUT1: [12, 20[
+ *		LUT2: [20, 21[
+ *		LUT3: [21, 23[
+ *		LUT4: [23, 27[
+ *		LUT5: [27, 30[
+ *		LUT6: [30, 32[
+ *		LUT7: [32, 33[
+ *		LUT8: [33, - [
+ */
+static const struct corunning_block_luts antenna_coupling_ranges[] = {
+	{
+		.range = 0,
+		.lut20 = {
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+		},
+	},
+	{
+		.range = 12,
+		.lut20 = {
+			cpu_to_le32(0x00000001),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+		},
+	},
+	{
+		.range = 20,
+		.lut20 = {
+			cpu_to_le32(0x00000002),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+		},
+	},
+	{
+		.range = 21,
+		.lut20 = {
+			cpu_to_le32(0x00000003),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+		},
+	},
+	{
+		.range = 23,
+		.lut20 = {
+			cpu_to_le32(0x00000004),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+		},
+	},
+	{
+		.range = 27,
+		.lut20 = {
+			cpu_to_le32(0x00000005),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+		},
+	},
+	{
+		.range = 30,
+		.lut20 = {
+			cpu_to_le32(0x00000006),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+		},
+	},
+	{
+		.range = 32,
+		.lut20 = {
+			cpu_to_le32(0x00000007),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+		},
+	},
+	{
+		.range = 33,
+		.lut20 = {
+			cpu_to_le32(0x00000008),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+		},
+	},
+};
+
 static enum iwl_bt_coex_lut_type
 iwl_get_coex_type(struct iwl_mvm *mvm, const struct ieee80211_vif *vif)
 {
@@ -390,8 +599,6 @@ int iwl_send_bt_init_conf(struct iwl_mvm *mvm)
 					    BT_VALID_LUT |
 					    BT_VALID_WIFI_RX_SW_PRIO_BOOST |
 					    BT_VALID_WIFI_TX_SW_PRIO_BOOST |
-					    BT_VALID_CORUN_LUT_20 |
-					    BT_VALID_CORUN_LUT_40 |
 					    BT_VALID_ANT_ISOLATION |
 					    BT_VALID_ANT_ISOLATION_THRS |
 					    BT_VALID_TXTX_DELTA_FREQ_THRS |
@@ -401,6 +608,12 @@ int iwl_send_bt_init_conf(struct iwl_mvm *mvm)
 	if (IWL_MVM_BT_COEX_SYNC2SCO)
 		bt_cmd->flags |= cpu_to_le32(BT_COEX_SYNC2SCO);
 
+	if (IWL_MVM_BT_COEX_CORUNNING) {
+		bt_cmd->valid_bit_msk = cpu_to_le32(BT_VALID_CORUN_LUT_20 |
+						    BT_VALID_CORUN_LUT_40);
+		bt_cmd->flags |= cpu_to_le32(BT_COEX_CORUNNING);
+	}
+
 	if (mvm->cfg->bt_shared_single_ant)
 		memcpy(&bt_cmd->decision_lut, iwl_single_shared_ant,
 		       sizeof(iwl_single_shared_ant));
@@ -408,6 +621,12 @@ int iwl_send_bt_init_conf(struct iwl_mvm *mvm)
 		memcpy(&bt_cmd->decision_lut, iwl_combined_lookup,
 		       sizeof(iwl_combined_lookup));
 
+	/* Take first Co-running block LUT to get started */
+	memcpy(bt_cmd->bt4_corun_lut20, antenna_coupling_ranges[0].lut20,
+	       sizeof(bt_cmd->bt4_corun_lut20));
+	memcpy(bt_cmd->bt4_corun_lut40, antenna_coupling_ranges[0].lut20,
+	       sizeof(bt_cmd->bt4_corun_lut40));
+
 	memcpy(&bt_cmd->bt_prio_boost, iwl_bt_prio_boost,
 	       sizeof(iwl_bt_prio_boost));
 	memcpy(&bt_cmd->bt4_multiprio_lut, iwl_bt_mprio_lut,
@@ -498,7 +717,7 @@ int iwl_mvm_bt_coex_reduced_txp(struct iwl_mvm *mvm, u8 sta_id, bool enable)
 	struct iwl_host_cmd cmd = {
 		.id = BT_CONFIG,
 		.len = { sizeof(*bt_cmd), },
-		.dataflags = { IWL_HCMD_DFL_DUP, },
+		.dataflags = { IWL_HCMD_DFL_NOCOPY, },
 		.flags = CMD_ASYNC,
 	};
 	struct iwl_mvm_sta *mvmsta;
@@ -993,3 +1212,69 @@ void iwl_mvm_bt_coex_vif_change(struct iwl_mvm *mvm)
 
 	iwl_mvm_bt_coex_notif_handle(mvm);
 }
+
+int iwl_mvm_rx_ant_coupling_notif(struct iwl_mvm *mvm,
+				  struct iwl_rx_cmd_buffer *rxb,
+				  struct iwl_device_cmd *dev_cmd)
+{
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
+	u32 ant_isolation = le32_to_cpup((void *)pkt->data);
+	u8 __maybe_unused lower_bound, upper_bound;
+	u8 lut;
+
+	struct iwl_bt_coex_cmd *bt_cmd;
+	struct iwl_host_cmd cmd = {
+		.id = BT_CONFIG,
+		.len = { sizeof(*bt_cmd), },
+		.dataflags = { IWL_HCMD_DFL_NOCOPY, },
+		.flags = CMD_SYNC,
+	};
+
+	if (!IWL_MVM_BT_COEX_CORUNNING)
+		return 0;
+
+	lockdep_assert_held(&mvm->mutex);
+
+	if (ant_isolation ==  mvm->last_ant_isol)
+		return 0;
+
+	for (lut = 0; lut < ARRAY_SIZE(antenna_coupling_ranges) - 1; lut++)
+		if (ant_isolation < antenna_coupling_ranges[lut + 1].range)
+			break;
+
+	lower_bound = antenna_coupling_ranges[lut].range;
+
+	if (lut < ARRAY_SIZE(antenna_coupling_ranges) - 1)
+		upper_bound = antenna_coupling_ranges[lut + 1].range;
+	else
+		upper_bound = antenna_coupling_ranges[lut].range;
+
+	IWL_DEBUG_COEX(mvm, "Antenna isolation=%d in range [%d,%d[, lut=%d\n",
+		       ant_isolation, lower_bound, upper_bound, lut);
+
+	mvm->last_ant_isol = ant_isolation;
+
+	if (mvm->last_corun_lut == lut)
+		return 0;
+
+	mvm->last_corun_lut = lut;
+
+	bt_cmd = kzalloc(sizeof(*bt_cmd), GFP_KERNEL);
+	if (!bt_cmd)
+		return 0;
+	cmd.data[0] = bt_cmd;
+
+	bt_cmd->flags = cpu_to_le32(BT_COEX_NW);
+	bt_cmd->valid_bit_msk |= cpu_to_le32(BT_VALID_ENABLE |
+					     BT_VALID_CORUN_LUT_20 |
+					     BT_VALID_CORUN_LUT_40);
+
+	/* For the moment, use the same LUT for 20GHz and 40GHz */
+	memcpy(bt_cmd->bt4_corun_lut20, antenna_coupling_ranges[lut].lut20,
+	       sizeof(bt_cmd->bt4_corun_lut20));
+
+	memcpy(bt_cmd->bt4_corun_lut40, antenna_coupling_ranges[lut].lut20,
+	       sizeof(bt_cmd->bt4_corun_lut40));
+
+	return 0;
+}
diff --git a/drivers/net/wireless/iwlwifi/mvm/constants.h b/drivers/net/wireless/iwlwifi/mvm/constants.h
index 2d133b1b2dde..37d5f3594c4f 100644
--- a/drivers/net/wireless/iwlwifi/mvm/constants.h
+++ b/drivers/net/wireless/iwlwifi/mvm/constants.h
@@ -82,5 +82,6 @@
 #define IWL_MVM_LOWLAT_SINGLE_BINDING_MAXDUR	24 /* TU */
 #define IWL_MVM_LOWLAT_DUAL_BINDING_MAXDUR	24 /* TU */
 #define IWL_MVM_BT_COEX_SYNC2SCO		1
+#define IWL_MVM_BT_COEX_CORUNNING		1
 
 #endif /* __MVM_CONSTANTS_H */
diff --git a/drivers/net/wireless/iwlwifi/mvm/debugfs.c b/drivers/net/wireless/iwlwifi/mvm/debugfs.c
index e3b42b4fa438..21ef8daede05 100644
--- a/drivers/net/wireless/iwlwifi/mvm/debugfs.c
+++ b/drivers/net/wireless/iwlwifi/mvm/debugfs.c
@@ -350,6 +350,9 @@ static ssize_t iwl_dbgfs_bt_notif_read(struct file *file, char __user *user_buf,
 			 le32_to_cpu(notif->secondary_ch_lut));
 	pos += scnprintf(buf+pos, bufsz-pos, "bt_activity_grading = %d\n",
 			 le32_to_cpu(notif->bt_activity_grading));
+	pos += scnprintf(buf+pos, bufsz-pos,
+			 "antenna isolation = %d CORUN LUT index = %d\n",
+			 mvm->last_ant_isol, mvm->last_corun_lut);
 
 	mutex_unlock(&mvm->mutex);
 
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-bt-coex.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-bt-coex.h
index 20b723d6270f..32156d7e2d07 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api-bt-coex.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-bt-coex.h
@@ -77,6 +77,7 @@
  * @BT_COEX_3W:
  * @BT_COEX_NW:
  * @BT_COEX_SYNC2SCO:
+ * @BT_COEX_CORUNNING:
  *
  * The COEX_MODE must be set for each command. Even if it is not changed.
  */
@@ -88,6 +89,7 @@ enum iwl_bt_coex_flags {
 	BT_COEX_3W			= 0x2 << BT_COEX_MODE_POS,
 	BT_COEX_NW			= 0x3 << BT_COEX_MODE_POS,
 	BT_COEX_SYNC2SCO		= BIT(7),
+	BT_COEX_CORUNNING		= BIT(8),
 };
 
 /*
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/iwlwifi/mvm/fw-api.h
index 807fa525cafe..703168b7f63e 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api.h
@@ -95,6 +95,7 @@ enum {
 	/* PHY context commands */
 	PHY_CONTEXT_CMD = 0x8,
 	DBG_CFG = 0x9,
+	ANTENNA_COUPLING_NOTIFICATION = 0xa,
 
 	/* station table */
 	ADD_STA_KEY = 0x17,
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index e5c1db97acf4..18939dc06faf 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -597,6 +597,8 @@ struct iwl_mvm {
 	u8 bt_kill_msk;
 	struct iwl_bt_coex_profile_notif last_bt_notif;
 	struct iwl_bt_coex_ci_cmd last_bt_ci_cmd;
+	u32 last_ant_isol;
+	u8 last_corun_lut;
 
 	/* Thermal Throttling and CTkill */
 	struct iwl_mvm_tt_mgmt thermal_throttle;
@@ -750,6 +752,9 @@ int iwl_mvm_rx_ba_notif(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb,
 			struct iwl_device_cmd *cmd);
 int iwl_mvm_rx_radio_ver(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb,
 			 struct iwl_device_cmd *cmd);
+int iwl_mvm_rx_ant_coupling_notif(struct iwl_mvm *mvm,
+				  struct iwl_rx_cmd_buffer *rxb,
+				  struct iwl_device_cmd *cmd);
 int iwl_mvm_rx_fw_error(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb,
 			  struct iwl_device_cmd *cmd);
 int iwl_mvm_rx_card_state_notif(struct iwl_mvm *mvm,
diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c
index 39279e1d6ad4..75fbc4054173 100644
--- a/drivers/net/wireless/iwlwifi/mvm/ops.c
+++ b/drivers/net/wireless/iwlwifi/mvm/ops.c
@@ -220,6 +220,8 @@ static const struct iwl_rx_handlers iwl_mvm_rx_handlers[] = {
 	RX_HANDLER(BT_PROFILE_NOTIFICATION, iwl_mvm_rx_bt_coex_notif, true),
 	RX_HANDLER(BEACON_NOTIFICATION, iwl_mvm_rx_beacon_notif, false),
 	RX_HANDLER(STATISTICS_NOTIFICATION, iwl_mvm_rx_statistics, true),
+	RX_HANDLER(ANTENNA_COUPLING_NOTIFICATION,
+		   iwl_mvm_rx_ant_coupling_notif, true),
 
 	RX_HANDLER(TIME_EVENT_NOTIFICATION, iwl_mvm_rx_time_event_notif, false),
 
@@ -321,6 +323,7 @@ static const char *const iwl_mvm_cmd_strings[REPLY_MAX] = {
 	CMD(MAC_PM_POWER_TABLE),
 	CMD(BT_COEX_CI),
 	CMD(PSM_UAPSD_AP_MISBEHAVING_NOTIFICATION),
+	CMD(ANTENNA_COUPLING_NOTIFICATION),
 };
 #undef CMD
 
-- 
cgit v1.2.2


From 5b7ff6158dc921fa9ae0c47a5a29a750d0d0ce60 Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Tue, 11 Mar 2014 19:27:45 +0200
Subject: iwlwifi: mvm: make bt-coex.c generic

Make bt-coex generic to allow other coex mechanisms.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/Makefile         |    2 +-
 drivers/net/wireless/iwlwifi/mvm/bt-coex.c        | 1280 ---------------------
 drivers/net/wireless/iwlwifi/mvm/coex.c           | 1280 +++++++++++++++++++++
 drivers/net/wireless/iwlwifi/mvm/fw-api-bt-coex.h |  350 ------
 drivers/net/wireless/iwlwifi/mvm/fw-api-coex.h    |  350 ++++++
 drivers/net/wireless/iwlwifi/mvm/fw-api.h         |    2 +-
 drivers/net/wireless/iwlwifi/mvm/mvm.h            |    4 +-
 drivers/net/wireless/iwlwifi/mvm/rs.c             |    2 +-
 8 files changed, 1635 insertions(+), 1635 deletions(-)
 delete mode 100644 drivers/net/wireless/iwlwifi/mvm/bt-coex.c
 create mode 100644 drivers/net/wireless/iwlwifi/mvm/coex.c
 delete mode 100644 drivers/net/wireless/iwlwifi/mvm/fw-api-bt-coex.h
 create mode 100644 drivers/net/wireless/iwlwifi/mvm/fw-api-coex.h

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/Makefile b/drivers/net/wireless/iwlwifi/mvm/Makefile
index 41d390fd2ac8..9798aa5b7645 100644
--- a/drivers/net/wireless/iwlwifi/mvm/Makefile
+++ b/drivers/net/wireless/iwlwifi/mvm/Makefile
@@ -2,7 +2,7 @@ obj-$(CONFIG_IWLMVM)   += iwlmvm.o
 iwlmvm-y += fw.o mac80211.o nvm.o ops.o phy-ctxt.o mac-ctxt.o
 iwlmvm-y += utils.o rx.o tx.o binding.o quota.o sta.o sf.o
 iwlmvm-y += scan.o time-event.o rs.o
-iwlmvm-y += power.o bt-coex.o
+iwlmvm-y += power.o coex.o
 iwlmvm-y += led.o tt.o
 iwlmvm-$(CONFIG_IWLWIFI_DEBUGFS) += debugfs.o debugfs-vif.o
 iwlmvm-$(CONFIG_PM_SLEEP) += d3.o
diff --git a/drivers/net/wireless/iwlwifi/mvm/bt-coex.c b/drivers/net/wireless/iwlwifi/mvm/bt-coex.c
deleted file mode 100644
index 4ae3c850b57e..000000000000
--- a/drivers/net/wireless/iwlwifi/mvm/bt-coex.c
+++ /dev/null
@@ -1,1280 +0,0 @@
-/******************************************************************************
- *
- * This file is provided under a dual BSD/GPLv2 license.  When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2013 - 2014 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
- * USA
- *
- * The full GNU General Public License is included in this distribution
- * in the file called COPYING.
- *
- * Contact Information:
- *  Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- * BSD LICENSE
- *
- * Copyright(c) 2013 - 2014 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- *  * Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- *  * Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *  * Neither the name Intel Corporation nor the names of its
- *    contributors may be used to endorse or promote products derived
- *    from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *****************************************************************************/
-
-#include <net/mac80211.h>
-
-#include "fw-api-bt-coex.h"
-#include "iwl-modparams.h"
-#include "mvm.h"
-#include "iwl-debug.h"
-
-#define EVENT_PRIO_ANT(_evt, _prio, _shrd_ant)			\
-	[(_evt)] = (((_prio) << BT_COEX_PRIO_TBL_PRIO_POS) |	\
-		   ((_shrd_ant) << BT_COEX_PRIO_TBL_SHRD_ANT_POS))
-
-static const u8 iwl_bt_prio_tbl[BT_COEX_PRIO_TBL_EVT_MAX] = {
-	EVENT_PRIO_ANT(BT_COEX_PRIO_TBL_EVT_INIT_CALIB1,
-		       BT_COEX_PRIO_TBL_PRIO_BYPASS, 0),
-	EVENT_PRIO_ANT(BT_COEX_PRIO_TBL_EVT_INIT_CALIB2,
-		       BT_COEX_PRIO_TBL_PRIO_BYPASS, 1),
-	EVENT_PRIO_ANT(BT_COEX_PRIO_TBL_EVT_PERIODIC_CALIB_LOW1,
-		       BT_COEX_PRIO_TBL_PRIO_LOW, 0),
-	EVENT_PRIO_ANT(BT_COEX_PRIO_TBL_EVT_PERIODIC_CALIB_LOW2,
-		       BT_COEX_PRIO_TBL_PRIO_LOW, 1),
-	EVENT_PRIO_ANT(BT_COEX_PRIO_TBL_EVT_PERIODIC_CALIB_HIGH1,
-		       BT_COEX_PRIO_TBL_PRIO_HIGH, 0),
-	EVENT_PRIO_ANT(BT_COEX_PRIO_TBL_EVT_PERIODIC_CALIB_HIGH2,
-		       BT_COEX_PRIO_TBL_PRIO_HIGH, 1),
-	EVENT_PRIO_ANT(BT_COEX_PRIO_TBL_EVT_DTIM,
-		       BT_COEX_PRIO_TBL_DISABLED, 0),
-	EVENT_PRIO_ANT(BT_COEX_PRIO_TBL_EVT_SCAN52,
-		       BT_COEX_PRIO_TBL_PRIO_COEX_OFF, 0),
-	EVENT_PRIO_ANT(BT_COEX_PRIO_TBL_EVT_SCAN24,
-		       BT_COEX_PRIO_TBL_PRIO_COEX_ON, 0),
-	EVENT_PRIO_ANT(BT_COEX_PRIO_TBL_EVT_IDLE,
-		       BT_COEX_PRIO_TBL_PRIO_COEX_IDLE, 0),
-	0, 0, 0, 0, 0, 0,
-};
-
-#undef EVENT_PRIO_ANT
-
-#define BT_ENABLE_REDUCED_TXPOWER_THRESHOLD	(-62)
-#define BT_DISABLE_REDUCED_TXPOWER_THRESHOLD	(-65)
-#define BT_ANTENNA_COUPLING_THRESHOLD		(30)
-
-int iwl_send_bt_prio_tbl(struct iwl_mvm *mvm)
-{
-	if (!(mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_NEWBT_COEX))
-		return 0;
-
-	return iwl_mvm_send_cmd_pdu(mvm, BT_COEX_PRIO_TABLE, CMD_SYNC,
-				    sizeof(struct iwl_bt_coex_prio_tbl_cmd),
-				    &iwl_bt_prio_tbl);
-}
-
-const u32 iwl_bt_ack_kill_msk[BT_KILL_MSK_MAX] = {
-	[BT_KILL_MSK_DEFAULT] = 0xffff0000,
-	[BT_KILL_MSK_SCO_HID_A2DP] = 0xffffffff,
-	[BT_KILL_MSK_REDUCED_TXPOW] = 0,
-};
-
-const u32 iwl_bt_cts_kill_msk[BT_KILL_MSK_MAX] = {
-	[BT_KILL_MSK_DEFAULT] = 0xffff0000,
-	[BT_KILL_MSK_SCO_HID_A2DP] = 0xffffffff,
-	[BT_KILL_MSK_REDUCED_TXPOW] = 0,
-};
-
-static const __le32 iwl_bt_prio_boost[BT_COEX_BOOST_SIZE] = {
-	cpu_to_le32(0xf0f0f0f0),
-	cpu_to_le32(0xc0c0c0c0),
-	cpu_to_le32(0xfcfcfcfc),
-	cpu_to_le32(0xff00ff00),
-};
-
-static const __le32 iwl_single_shared_ant[BT_COEX_MAX_LUT][BT_COEX_LUT_SIZE] = {
-	{
-		cpu_to_le32(0x40000000),
-		cpu_to_le32(0x00000000),
-		cpu_to_le32(0x44000000),
-		cpu_to_le32(0x00000000),
-		cpu_to_le32(0x40000000),
-		cpu_to_le32(0x00000000),
-		cpu_to_le32(0x44000000),
-		cpu_to_le32(0x00000000),
-		cpu_to_le32(0xc0004000),
-		cpu_to_le32(0xf0005000),
-		cpu_to_le32(0xc0004000),
-		cpu_to_le32(0xf0005000),
-	},
-	{
-		cpu_to_le32(0x40000000),
-		cpu_to_le32(0x00000000),
-		cpu_to_le32(0x44000000),
-		cpu_to_le32(0x00000000),
-		cpu_to_le32(0x40000000),
-		cpu_to_le32(0x00000000),
-		cpu_to_le32(0x44000000),
-		cpu_to_le32(0x00000000),
-		cpu_to_le32(0xc0004000),
-		cpu_to_le32(0xf0005000),
-		cpu_to_le32(0xc0004000),
-		cpu_to_le32(0xf0005000),
-	},
-	{
-		cpu_to_le32(0x40000000),
-		cpu_to_le32(0x00000000),
-		cpu_to_le32(0x44000000),
-		cpu_to_le32(0x00000000),
-		cpu_to_le32(0x40000000),
-		cpu_to_le32(0x00000000),
-		cpu_to_le32(0x44000000),
-		cpu_to_le32(0x00000000),
-		cpu_to_le32(0xc0004000),
-		cpu_to_le32(0xf0005000),
-		cpu_to_le32(0xc0004000),
-		cpu_to_le32(0xf0005000),
-	},
-};
-
-static const __le32 iwl_combined_lookup[BT_COEX_MAX_LUT][BT_COEX_LUT_SIZE] = {
-	{
-		/* Tight */
-		cpu_to_le32(0xaaaaaaaa),
-		cpu_to_le32(0xaaaaaaaa),
-		cpu_to_le32(0xaeaaaaaa),
-		cpu_to_le32(0xaaaaaaaa),
-		cpu_to_le32(0xcc00ff28),
-		cpu_to_le32(0x0000aaaa),
-		cpu_to_le32(0xcc00aaaa),
-		cpu_to_le32(0x0000aaaa),
-		cpu_to_le32(0xc0004000),
-		cpu_to_le32(0x00000000),
-		cpu_to_le32(0xf0005000),
-		cpu_to_le32(0xf0005000),
-	},
-	{
-		/* Loose */
-		cpu_to_le32(0xaaaaaaaa),
-		cpu_to_le32(0xaaaaaaaa),
-		cpu_to_le32(0xaaaaaaaa),
-		cpu_to_le32(0xaaaaaaaa),
-		cpu_to_le32(0xcc00ff28),
-		cpu_to_le32(0x0000aaaa),
-		cpu_to_le32(0xcc00aaaa),
-		cpu_to_le32(0x0000aaaa),
-		cpu_to_le32(0x00000000),
-		cpu_to_le32(0x00000000),
-		cpu_to_le32(0xf0005000),
-		cpu_to_le32(0xf0005000),
-	},
-	{
-		/* Tx Tx disabled */
-		cpu_to_le32(0xaaaaaaaa),
-		cpu_to_le32(0xaaaaaaaa),
-		cpu_to_le32(0xaaaaaaaa),
-		cpu_to_le32(0xaaaaaaaa),
-		cpu_to_le32(0xcc00ff28),
-		cpu_to_le32(0x0000aaaa),
-		cpu_to_le32(0xcc00aaaa),
-		cpu_to_le32(0x0000aaaa),
-		cpu_to_le32(0xC0004000),
-		cpu_to_le32(0xC0004000),
-		cpu_to_le32(0xF0005000),
-		cpu_to_le32(0xF0005000),
-	},
-};
-
-/* 20MHz / 40MHz below / 40Mhz above*/
-static const __le64 iwl_ci_mask[][3] = {
-	/* dummy entry for channel 0 */
-	{cpu_to_le64(0), cpu_to_le64(0), cpu_to_le64(0)},
-	{
-		cpu_to_le64(0x0000001FFFULL),
-		cpu_to_le64(0x0ULL),
-		cpu_to_le64(0x00007FFFFFULL),
-	},
-	{
-		cpu_to_le64(0x000000FFFFULL),
-		cpu_to_le64(0x0ULL),
-		cpu_to_le64(0x0003FFFFFFULL),
-	},
-	{
-		cpu_to_le64(0x000003FFFCULL),
-		cpu_to_le64(0x0ULL),
-		cpu_to_le64(0x000FFFFFFCULL),
-	},
-	{
-		cpu_to_le64(0x00001FFFE0ULL),
-		cpu_to_le64(0x0ULL),
-		cpu_to_le64(0x007FFFFFE0ULL),
-	},
-	{
-		cpu_to_le64(0x00007FFF80ULL),
-		cpu_to_le64(0x00007FFFFFULL),
-		cpu_to_le64(0x01FFFFFF80ULL),
-	},
-	{
-		cpu_to_le64(0x0003FFFC00ULL),
-		cpu_to_le64(0x0003FFFFFFULL),
-		cpu_to_le64(0x0FFFFFFC00ULL),
-	},
-	{
-		cpu_to_le64(0x000FFFF000ULL),
-		cpu_to_le64(0x000FFFFFFCULL),
-		cpu_to_le64(0x3FFFFFF000ULL),
-	},
-	{
-		cpu_to_le64(0x007FFF8000ULL),
-		cpu_to_le64(0x007FFFFFE0ULL),
-		cpu_to_le64(0xFFFFFF8000ULL),
-	},
-	{
-		cpu_to_le64(0x01FFFE0000ULL),
-		cpu_to_le64(0x01FFFFFF80ULL),
-		cpu_to_le64(0xFFFFFE0000ULL),
-	},
-	{
-		cpu_to_le64(0x0FFFF00000ULL),
-		cpu_to_le64(0x0FFFFFFC00ULL),
-		cpu_to_le64(0x0ULL),
-	},
-	{
-		cpu_to_le64(0x3FFFC00000ULL),
-		cpu_to_le64(0x3FFFFFF000ULL),
-		cpu_to_le64(0x0)
-	},
-	{
-		cpu_to_le64(0xFFFE000000ULL),
-		cpu_to_le64(0xFFFFFF8000ULL),
-		cpu_to_le64(0x0)
-	},
-	{
-		cpu_to_le64(0xFFF8000000ULL),
-		cpu_to_le64(0xFFFFFE0000ULL),
-		cpu_to_le64(0x0)
-	},
-	{
-		cpu_to_le64(0xFFC0000000ULL),
-		cpu_to_le64(0x0ULL),
-		cpu_to_le64(0x0ULL)
-	},
-};
-
-static const __le32 iwl_bt_mprio_lut[BT_COEX_MULTI_PRIO_LUT_SIZE] = {
-	cpu_to_le32(0x22002200),
-	cpu_to_le32(0x33113311),
-};
-
-struct corunning_block_luts {
-	u8 range;
-	__le32 lut20[BT_COEX_CORUN_LUT_SIZE];
-};
-
-/*
- * Ranges for the antenna coupling calibration / co-running block LUT:
- *		LUT0: [ 0, 12[
- *		LUT1: [12, 20[
- *		LUT2: [20, 21[
- *		LUT3: [21, 23[
- *		LUT4: [23, 27[
- *		LUT5: [27, 30[
- *		LUT6: [30, 32[
- *		LUT7: [32, 33[
- *		LUT8: [33, - [
- */
-static const struct corunning_block_luts antenna_coupling_ranges[] = {
-	{
-		.range = 0,
-		.lut20 = {
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-		},
-	},
-	{
-		.range = 12,
-		.lut20 = {
-			cpu_to_le32(0x00000001),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-		},
-	},
-	{
-		.range = 20,
-		.lut20 = {
-			cpu_to_le32(0x00000002),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-		},
-	},
-	{
-		.range = 21,
-		.lut20 = {
-			cpu_to_le32(0x00000003),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-		},
-	},
-	{
-		.range = 23,
-		.lut20 = {
-			cpu_to_le32(0x00000004),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-		},
-	},
-	{
-		.range = 27,
-		.lut20 = {
-			cpu_to_le32(0x00000005),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-		},
-	},
-	{
-		.range = 30,
-		.lut20 = {
-			cpu_to_le32(0x00000006),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-		},
-	},
-	{
-		.range = 32,
-		.lut20 = {
-			cpu_to_le32(0x00000007),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-		},
-	},
-	{
-		.range = 33,
-		.lut20 = {
-			cpu_to_le32(0x00000008),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
-		},
-	},
-};
-
-static enum iwl_bt_coex_lut_type
-iwl_get_coex_type(struct iwl_mvm *mvm, const struct ieee80211_vif *vif)
-{
-	struct ieee80211_chanctx_conf *chanctx_conf;
-	enum iwl_bt_coex_lut_type ret;
-	u16 phy_ctx_id;
-
-	/*
-	 * Checking that we hold mvm->mutex is a good idea, but the rate
-	 * control can't acquire the mutex since it runs in Tx path.
-	 * So this is racy in that case, but in the worst case, the AMPDU
-	 * size limit will be wrong for a short time which is not a big
-	 * issue.
-	 */
-
-	rcu_read_lock();
-
-	chanctx_conf = rcu_dereference(vif->chanctx_conf);
-
-	if (!chanctx_conf ||
-	     chanctx_conf->def.chan->band != IEEE80211_BAND_2GHZ) {
-		rcu_read_unlock();
-		return BT_COEX_LOOSE_LUT;
-	}
-
-	ret = BT_COEX_TX_DIS_LUT;
-
-	if (mvm->cfg->bt_shared_single_ant) {
-		rcu_read_unlock();
-		return ret;
-	}
-
-	phy_ctx_id = *((u16 *)chanctx_conf->drv_priv);
-
-	if (mvm->last_bt_ci_cmd.primary_ch_phy_id == phy_ctx_id)
-		ret = le32_to_cpu(mvm->last_bt_notif.primary_ch_lut);
-	else if (mvm->last_bt_ci_cmd.secondary_ch_phy_id == phy_ctx_id)
-		ret = le32_to_cpu(mvm->last_bt_notif.secondary_ch_lut);
-	/* else - default = TX TX disallowed */
-
-	rcu_read_unlock();
-
-	return ret;
-}
-
-int iwl_send_bt_init_conf(struct iwl_mvm *mvm)
-{
-	struct iwl_bt_coex_cmd *bt_cmd;
-	struct iwl_host_cmd cmd = {
-		.id = BT_CONFIG,
-		.len = { sizeof(*bt_cmd), },
-		.dataflags = { IWL_HCMD_DFL_NOCOPY, },
-		.flags = CMD_SYNC,
-	};
-	int ret;
-	u32 flags;
-
-	if (!(mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_NEWBT_COEX))
-		return 0;
-
-	bt_cmd = kzalloc(sizeof(*bt_cmd), GFP_KERNEL);
-	if (!bt_cmd)
-		return -ENOMEM;
-	cmd.data[0] = bt_cmd;
-
-	bt_cmd->max_kill = 5;
-	bt_cmd->bt4_antenna_isolation_thr = BT_ANTENNA_COUPLING_THRESHOLD,
-	bt_cmd->bt4_antenna_isolation = iwlwifi_mod_params.ant_coupling,
-	bt_cmd->bt4_tx_tx_delta_freq_thr = 15,
-	bt_cmd->bt4_tx_rx_max_freq0 = 15,
-
-	flags = iwlwifi_mod_params.bt_coex_active ?
-			BT_COEX_NW : BT_COEX_DISABLE;
-	bt_cmd->flags = cpu_to_le32(flags);
-
-	bt_cmd->valid_bit_msk = cpu_to_le32(BT_VALID_ENABLE |
-					    BT_VALID_BT_PRIO_BOOST |
-					    BT_VALID_MAX_KILL |
-					    BT_VALID_3W_TMRS |
-					    BT_VALID_KILL_ACK |
-					    BT_VALID_KILL_CTS |
-					    BT_VALID_REDUCED_TX_POWER |
-					    BT_VALID_LUT |
-					    BT_VALID_WIFI_RX_SW_PRIO_BOOST |
-					    BT_VALID_WIFI_TX_SW_PRIO_BOOST |
-					    BT_VALID_ANT_ISOLATION |
-					    BT_VALID_ANT_ISOLATION_THRS |
-					    BT_VALID_TXTX_DELTA_FREQ_THRS |
-					    BT_VALID_TXRX_MAX_FREQ_0 |
-					    BT_VALID_SYNC_TO_SCO);
-
-	if (IWL_MVM_BT_COEX_SYNC2SCO)
-		bt_cmd->flags |= cpu_to_le32(BT_COEX_SYNC2SCO);
-
-	if (IWL_MVM_BT_COEX_CORUNNING) {
-		bt_cmd->valid_bit_msk = cpu_to_le32(BT_VALID_CORUN_LUT_20 |
-						    BT_VALID_CORUN_LUT_40);
-		bt_cmd->flags |= cpu_to_le32(BT_COEX_CORUNNING);
-	}
-
-	if (mvm->cfg->bt_shared_single_ant)
-		memcpy(&bt_cmd->decision_lut, iwl_single_shared_ant,
-		       sizeof(iwl_single_shared_ant));
-	else
-		memcpy(&bt_cmd->decision_lut, iwl_combined_lookup,
-		       sizeof(iwl_combined_lookup));
-
-	/* Take first Co-running block LUT to get started */
-	memcpy(bt_cmd->bt4_corun_lut20, antenna_coupling_ranges[0].lut20,
-	       sizeof(bt_cmd->bt4_corun_lut20));
-	memcpy(bt_cmd->bt4_corun_lut40, antenna_coupling_ranges[0].lut20,
-	       sizeof(bt_cmd->bt4_corun_lut40));
-
-	memcpy(&bt_cmd->bt_prio_boost, iwl_bt_prio_boost,
-	       sizeof(iwl_bt_prio_boost));
-	memcpy(&bt_cmd->bt4_multiprio_lut, iwl_bt_mprio_lut,
-	       sizeof(iwl_bt_mprio_lut));
-	bt_cmd->kill_ack_msk =
-		cpu_to_le32(iwl_bt_ack_kill_msk[BT_KILL_MSK_DEFAULT]);
-	bt_cmd->kill_cts_msk =
-		cpu_to_le32(iwl_bt_cts_kill_msk[BT_KILL_MSK_DEFAULT]);
-
-	memset(&mvm->last_bt_notif, 0, sizeof(mvm->last_bt_notif));
-	memset(&mvm->last_bt_ci_cmd, 0, sizeof(mvm->last_bt_ci_cmd));
-
-	ret = iwl_mvm_send_cmd(mvm, &cmd);
-
-	kfree(bt_cmd);
-	return ret;
-}
-
-static int iwl_mvm_bt_udpate_ctrl_kill_msk(struct iwl_mvm *mvm,
-					   bool reduced_tx_power)
-{
-	enum iwl_bt_kill_msk bt_kill_msk;
-	struct iwl_bt_coex_cmd *bt_cmd;
-	struct iwl_bt_coex_profile_notif *notif = &mvm->last_bt_notif;
-	struct iwl_host_cmd cmd = {
-		.id = BT_CONFIG,
-		.data[0] = &bt_cmd,
-		.len = { sizeof(*bt_cmd), },
-		.dataflags = { IWL_HCMD_DFL_NOCOPY, },
-		.flags = CMD_SYNC,
-	};
-	int ret = 0;
-
-	lockdep_assert_held(&mvm->mutex);
-
-	if (reduced_tx_power) {
-		/* Reduced Tx power has precedence on the type of the profile */
-		bt_kill_msk = BT_KILL_MSK_REDUCED_TXPOW;
-	} else {
-		/* Low latency BT profile is active: give higher prio to BT */
-		if (BT_MBOX_MSG(notif, 3, SCO_STATE)  ||
-		    BT_MBOX_MSG(notif, 3, A2DP_STATE) ||
-		    BT_MBOX_MSG(notif, 3, SNIFF_STATE))
-			bt_kill_msk = BT_KILL_MSK_SCO_HID_A2DP;
-		else
-			bt_kill_msk = BT_KILL_MSK_DEFAULT;
-	}
-
-	IWL_DEBUG_COEX(mvm,
-		       "Update kill_msk: %d - SCO %sactive A2DP %sactive SNIFF %sactive\n",
-		       bt_kill_msk,
-		       BT_MBOX_MSG(notif, 3, SCO_STATE) ? "" : "in",
-		       BT_MBOX_MSG(notif, 3, A2DP_STATE) ? "" : "in",
-		       BT_MBOX_MSG(notif, 3, SNIFF_STATE) ? "" : "in");
-
-	/* Don't send HCMD if there is no update */
-	if (bt_kill_msk == mvm->bt_kill_msk)
-		return 0;
-
-	mvm->bt_kill_msk = bt_kill_msk;
-
-	bt_cmd = kzalloc(sizeof(*bt_cmd), GFP_KERNEL);
-	if (!bt_cmd)
-		return -ENOMEM;
-	cmd.data[0] = bt_cmd;
-	bt_cmd->flags = cpu_to_le32(BT_COEX_NW);
-
-	bt_cmd->kill_ack_msk = cpu_to_le32(iwl_bt_ack_kill_msk[bt_kill_msk]);
-	bt_cmd->kill_cts_msk = cpu_to_le32(iwl_bt_cts_kill_msk[bt_kill_msk]);
-	bt_cmd->valid_bit_msk |= cpu_to_le32(BT_VALID_ENABLE |
-					     BT_VALID_KILL_ACK |
-					     BT_VALID_KILL_CTS);
-
-	IWL_DEBUG_COEX(mvm, "ACK Kill msk = 0x%08x, CTS Kill msk = 0x%08x\n",
-		       iwl_bt_ack_kill_msk[bt_kill_msk],
-		       iwl_bt_cts_kill_msk[bt_kill_msk]);
-
-	ret = iwl_mvm_send_cmd(mvm, &cmd);
-
-	kfree(bt_cmd);
-	return ret;
-}
-
-int iwl_mvm_bt_coex_reduced_txp(struct iwl_mvm *mvm, u8 sta_id, bool enable)
-{
-	struct iwl_bt_coex_cmd *bt_cmd;
-	/* Send ASYNC since this can be sent from an atomic context */
-	struct iwl_host_cmd cmd = {
-		.id = BT_CONFIG,
-		.len = { sizeof(*bt_cmd), },
-		.dataflags = { IWL_HCMD_DFL_NOCOPY, },
-		.flags = CMD_ASYNC,
-	};
-	struct iwl_mvm_sta *mvmsta;
-	int ret;
-
-	mvmsta = iwl_mvm_sta_from_staid_protected(mvm, sta_id);
-	if (!mvmsta)
-		return 0;
-
-	/* nothing to do */
-	if (mvmsta->bt_reduced_txpower_dbg ||
-	    mvmsta->bt_reduced_txpower == enable)
-		return 0;
-
-	bt_cmd = kzalloc(sizeof(*bt_cmd), GFP_ATOMIC);
-	if (!bt_cmd)
-		return -ENOMEM;
-	cmd.data[0] = bt_cmd;
-	bt_cmd->flags = cpu_to_le32(BT_COEX_NW);
-
-	bt_cmd->valid_bit_msk =
-		cpu_to_le32(BT_VALID_ENABLE | BT_VALID_REDUCED_TX_POWER);
-	bt_cmd->bt_reduced_tx_power = sta_id;
-
-	if (enable)
-		bt_cmd->bt_reduced_tx_power |= BT_REDUCED_TX_POWER_BIT;
-
-	IWL_DEBUG_COEX(mvm, "%sable reduced Tx Power for sta %d\n",
-		       enable ? "en" : "dis", sta_id);
-
-	mvmsta->bt_reduced_txpower = enable;
-
-	ret = iwl_mvm_send_cmd(mvm, &cmd);
-
-	kfree(bt_cmd);
-	return ret;
-}
-
-struct iwl_bt_iterator_data {
-	struct iwl_bt_coex_profile_notif *notif;
-	struct iwl_mvm *mvm;
-	u32 num_bss_ifaces;
-	bool reduced_tx_power;
-	struct ieee80211_chanctx_conf *primary;
-	struct ieee80211_chanctx_conf *secondary;
-	bool primary_ll;
-};
-
-static inline
-void iwl_mvm_bt_coex_enable_rssi_event(struct iwl_mvm *mvm,
-				       struct ieee80211_vif *vif,
-				       bool enable, int rssi)
-{
-	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
-
-	mvmvif->bf_data.last_bt_coex_event = rssi;
-	mvmvif->bf_data.bt_coex_max_thold =
-		enable ? BT_ENABLE_REDUCED_TXPOWER_THRESHOLD : 0;
-	mvmvif->bf_data.bt_coex_min_thold =
-		enable ? BT_DISABLE_REDUCED_TXPOWER_THRESHOLD : 0;
-}
-
-/* must be called under rcu_read_lock */
-static void iwl_mvm_bt_notif_iterator(void *_data, u8 *mac,
-				      struct ieee80211_vif *vif)
-{
-	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
-	struct iwl_bt_iterator_data *data = _data;
-	struct iwl_mvm *mvm = data->mvm;
-	struct ieee80211_chanctx_conf *chanctx_conf;
-	enum ieee80211_smps_mode smps_mode;
-	u32 bt_activity_grading;
-	int ave_rssi;
-
-	lockdep_assert_held(&mvm->mutex);
-
-	switch (vif->type) {
-	case NL80211_IFTYPE_STATION:
-		/* default smps_mode for BSS / P2P client is AUTOMATIC */
-		smps_mode = IEEE80211_SMPS_AUTOMATIC;
-		data->num_bss_ifaces++;
-
-		/*
-		 * Count unassoc BSSes, relax SMSP constraints
-		 * and disable reduced Tx Power
-		 */
-		if (!vif->bss_conf.assoc) {
-			iwl_mvm_update_smps(mvm, vif, IWL_MVM_SMPS_REQ_BT_COEX,
-					    smps_mode);
-			if (iwl_mvm_bt_coex_reduced_txp(mvm,
-							mvmvif->ap_sta_id,
-							false))
-				IWL_ERR(mvm, "Couldn't send BT_CONFIG cmd\n");
-			return;
-		}
-		break;
-	case NL80211_IFTYPE_AP:
-		/* default smps_mode for AP / GO is OFF */
-		smps_mode = IEEE80211_SMPS_OFF;
-		if (!mvmvif->ap_ibss_active) {
-			iwl_mvm_update_smps(mvm, vif, IWL_MVM_SMPS_REQ_BT_COEX,
-					    smps_mode);
-			return;
-		}
-
-		/* the Ack / Cts kill mask must be default if AP / GO */
-		data->reduced_tx_power = false;
-		break;
-	default:
-		return;
-	}
-
-	chanctx_conf = rcu_dereference(vif->chanctx_conf);
-
-	/* If channel context is invalid or not on 2.4GHz .. */
-	if ((!chanctx_conf ||
-	     chanctx_conf->def.chan->band != IEEE80211_BAND_2GHZ)) {
-		/* ... relax constraints and disable rssi events */
-		iwl_mvm_update_smps(mvm, vif, IWL_MVM_SMPS_REQ_BT_COEX,
-				    smps_mode);
-		if (vif->type == NL80211_IFTYPE_STATION)
-			iwl_mvm_bt_coex_enable_rssi_event(mvm, vif, false, 0);
-		return;
-	}
-
-	bt_activity_grading = le32_to_cpu(data->notif->bt_activity_grading);
-	if (bt_activity_grading >= BT_HIGH_TRAFFIC)
-		smps_mode = IEEE80211_SMPS_STATIC;
-	else if (bt_activity_grading >= BT_LOW_TRAFFIC)
-		smps_mode = vif->type == NL80211_IFTYPE_AP ?
-				IEEE80211_SMPS_OFF :
-				IEEE80211_SMPS_DYNAMIC;
-	IWL_DEBUG_COEX(data->mvm,
-		       "mac %d: bt_status %d bt_activity_grading %d smps_req %d\n",
-		       mvmvif->id, data->notif->bt_status, bt_activity_grading,
-		       smps_mode);
-
-	iwl_mvm_update_smps(mvm, vif, IWL_MVM_SMPS_REQ_BT_COEX, smps_mode);
-
-	/* low latency is always primary */
-	if (iwl_mvm_vif_low_latency(mvmvif)) {
-		data->primary_ll = true;
-
-		data->secondary = data->primary;
-		data->primary = chanctx_conf;
-	}
-
-	if (vif->type == NL80211_IFTYPE_AP) {
-		if (!mvmvif->ap_ibss_active)
-			return;
-
-		if (chanctx_conf == data->primary)
-			return;
-
-		if (!data->primary_ll) {
-			/*
-			 * downgrade the current primary no matter what its
-			 * type is.
-			 */
-			data->secondary = data->primary;
-			data->primary = chanctx_conf;
-		} else {
-			/* there is low latency vif - we will be secondary */
-			data->secondary = chanctx_conf;
-		}
-		return;
-	}
-
-	/*
-	 * STA / P2P Client, try to be primary if first vif. If we are in low
-	 * latency mode, we are already in primary and just don't do much
-	 */
-	if (!data->primary || data->primary == chanctx_conf)
-		data->primary = chanctx_conf;
-	else if (!data->secondary)
-		/* if secondary is not NULL, it might be a GO */
-		data->secondary = chanctx_conf;
-
-	/* don't reduce the Tx power if in loose scheme */
-	if (iwl_get_coex_type(mvm, vif) == BT_COEX_LOOSE_LUT ||
-	    mvm->cfg->bt_shared_single_ant) {
-		data->reduced_tx_power = false;
-		iwl_mvm_bt_coex_enable_rssi_event(mvm, vif, false, 0);
-		return;
-	}
-
-	/* reduced Txpower only if BT is on, so ...*/
-	if (!data->notif->bt_status) {
-		/* ... cancel reduced Tx power ... */
-		if (iwl_mvm_bt_coex_reduced_txp(mvm, mvmvif->ap_sta_id, false))
-			IWL_ERR(mvm, "Couldn't send BT_CONFIG cmd\n");
-		data->reduced_tx_power = false;
-
-		/* ... and there is no need to get reports on RSSI any more. */
-		iwl_mvm_bt_coex_enable_rssi_event(mvm, vif, false, 0);
-		return;
-	}
-
-	/* try to get the avg rssi from fw */
-	ave_rssi = mvmvif->bf_data.ave_beacon_signal;
-
-	/* if the RSSI isn't valid, fake it is very low */
-	if (!ave_rssi)
-		ave_rssi = -100;
-	if (ave_rssi > BT_ENABLE_REDUCED_TXPOWER_THRESHOLD) {
-		if (iwl_mvm_bt_coex_reduced_txp(mvm, mvmvif->ap_sta_id, true))
-			IWL_ERR(mvm, "Couldn't send BT_CONFIG cmd\n");
-
-		/*
-		 * bt_kill_msk can be BT_KILL_MSK_REDUCED_TXPOW only if all the
-		 * BSS / P2P clients have rssi above threshold.
-		 * We set the bt_kill_msk to BT_KILL_MSK_REDUCED_TXPOW before
-		 * the iteration, if one interface's rssi isn't good enough,
-		 * bt_kill_msk will be set to default values.
-		 */
-	} else if (ave_rssi < BT_DISABLE_REDUCED_TXPOWER_THRESHOLD) {
-		if (iwl_mvm_bt_coex_reduced_txp(mvm, mvmvif->ap_sta_id, false))
-			IWL_ERR(mvm, "Couldn't send BT_CONFIG cmd\n");
-
-		/*
-		 * One interface hasn't rssi above threshold, bt_kill_msk must
-		 * be set to default values.
-		 */
-		data->reduced_tx_power = false;
-	}
-
-	/* Begin to monitor the RSSI: it may influence the reduced Tx power */
-	iwl_mvm_bt_coex_enable_rssi_event(mvm, vif, true, ave_rssi);
-}
-
-static void iwl_mvm_bt_coex_notif_handle(struct iwl_mvm *mvm)
-{
-	struct iwl_bt_iterator_data data = {
-		.mvm = mvm,
-		.notif = &mvm->last_bt_notif,
-		.reduced_tx_power = true,
-	};
-	struct iwl_bt_coex_ci_cmd cmd = {};
-	u8 ci_bw_idx;
-
-	rcu_read_lock();
-	ieee80211_iterate_active_interfaces_atomic(
-					mvm->hw, IEEE80211_IFACE_ITER_NORMAL,
-					iwl_mvm_bt_notif_iterator, &data);
-
-	if (data.primary) {
-		struct ieee80211_chanctx_conf *chan = data.primary;
-		if (WARN_ON(!chan->def.chan)) {
-			rcu_read_unlock();
-			return;
-		}
-
-		if (chan->def.width < NL80211_CHAN_WIDTH_40) {
-			ci_bw_idx = 0;
-			cmd.co_run_bw_primary = 0;
-		} else {
-			cmd.co_run_bw_primary = 1;
-			if (chan->def.center_freq1 >
-			    chan->def.chan->center_freq)
-				ci_bw_idx = 2;
-			else
-				ci_bw_idx = 1;
-		}
-
-		cmd.bt_primary_ci =
-			iwl_ci_mask[chan->def.chan->hw_value][ci_bw_idx];
-		cmd.primary_ch_phy_id = *((u16 *)data.primary->drv_priv);
-	}
-
-	if (data.secondary) {
-		struct ieee80211_chanctx_conf *chan = data.secondary;
-		if (WARN_ON(!data.secondary->def.chan)) {
-			rcu_read_unlock();
-			return;
-		}
-
-		if (chan->def.width < NL80211_CHAN_WIDTH_40) {
-			ci_bw_idx = 0;
-			cmd.co_run_bw_secondary = 0;
-		} else {
-			cmd.co_run_bw_secondary = 1;
-			if (chan->def.center_freq1 >
-			    chan->def.chan->center_freq)
-				ci_bw_idx = 2;
-			else
-				ci_bw_idx = 1;
-		}
-
-		cmd.bt_secondary_ci =
-			iwl_ci_mask[chan->def.chan->hw_value][ci_bw_idx];
-		cmd.secondary_ch_phy_id = *((u16 *)data.secondary->drv_priv);
-	}
-
-	rcu_read_unlock();
-
-	/* Don't spam the fw with the same command over and over */
-	if (memcmp(&cmd, &mvm->last_bt_ci_cmd, sizeof(cmd))) {
-		if (iwl_mvm_send_cmd_pdu(mvm, BT_COEX_CI, CMD_SYNC,
-					 sizeof(cmd), &cmd))
-			IWL_ERR(mvm, "Failed to send BT_CI cmd");
-		memcpy(&mvm->last_bt_ci_cmd, &cmd, sizeof(cmd));
-	}
-
-	/*
-	 * If there are no BSS / P2P client interfaces, reduced Tx Power is
-	 * irrelevant since it is based on the RSSI coming from the beacon.
-	 * Use BT_KILL_MSK_DEFAULT in that case.
-	 */
-	data.reduced_tx_power = data.reduced_tx_power && data.num_bss_ifaces;
-
-	if (iwl_mvm_bt_udpate_ctrl_kill_msk(mvm, data.reduced_tx_power))
-		IWL_ERR(mvm, "Failed to update the ctrl_kill_msk\n");
-}
-
-/* upon association, the fw will send in BT Coex notification */
-int iwl_mvm_rx_bt_coex_notif(struct iwl_mvm *mvm,
-			     struct iwl_rx_cmd_buffer *rxb,
-			     struct iwl_device_cmd *dev_cmd)
-{
-	struct iwl_rx_packet *pkt = rxb_addr(rxb);
-	struct iwl_bt_coex_profile_notif *notif = (void *)pkt->data;
-
-
-	IWL_DEBUG_COEX(mvm, "BT Coex Notification received\n");
-	IWL_DEBUG_COEX(mvm, "\tBT status: %s\n",
-		       notif->bt_status ? "ON" : "OFF");
-	IWL_DEBUG_COEX(mvm, "\tBT open conn %d\n", notif->bt_open_conn);
-	IWL_DEBUG_COEX(mvm, "\tBT ci compliance %d\n", notif->bt_ci_compliance);
-	IWL_DEBUG_COEX(mvm, "\tBT primary_ch_lut %d\n",
-		       le32_to_cpu(notif->primary_ch_lut));
-	IWL_DEBUG_COEX(mvm, "\tBT secondary_ch_lut %d\n",
-		       le32_to_cpu(notif->secondary_ch_lut));
-	IWL_DEBUG_COEX(mvm, "\tBT activity grading %d\n",
-		       le32_to_cpu(notif->bt_activity_grading));
-	IWL_DEBUG_COEX(mvm, "\tBT agg traffic load %d\n",
-		       notif->bt_agg_traffic_load);
-
-	/* remember this notification for future use: rssi fluctuations */
-	memcpy(&mvm->last_bt_notif, notif, sizeof(mvm->last_bt_notif));
-
-	iwl_mvm_bt_coex_notif_handle(mvm);
-
-	/*
-	 * This is an async handler for a notification, returning anything other
-	 * than 0 doesn't make sense even if HCMD failed.
-	 */
-	return 0;
-}
-
-static void iwl_mvm_bt_rssi_iterator(void *_data, u8 *mac,
-				   struct ieee80211_vif *vif)
-{
-	struct iwl_mvm_vif *mvmvif = (void *)vif->drv_priv;
-	struct iwl_bt_iterator_data *data = _data;
-	struct iwl_mvm *mvm = data->mvm;
-
-	struct ieee80211_sta *sta;
-	struct iwl_mvm_sta *mvmsta;
-
-	struct ieee80211_chanctx_conf *chanctx_conf;
-
-	rcu_read_lock();
-	chanctx_conf = rcu_dereference(vif->chanctx_conf);
-	/* If channel context is invalid or not on 2.4GHz - don't count it */
-	if (!chanctx_conf ||
-	    chanctx_conf->def.chan->band != IEEE80211_BAND_2GHZ) {
-		rcu_read_unlock();
-		return;
-	}
-	rcu_read_unlock();
-
-	if (vif->type != NL80211_IFTYPE_STATION ||
-	    mvmvif->ap_sta_id == IWL_MVM_STATION_COUNT)
-		return;
-
-	sta = rcu_dereference_protected(mvm->fw_id_to_mac_id[mvmvif->ap_sta_id],
-					lockdep_is_held(&mvm->mutex));
-
-	/* This can happen if the station has been removed right now */
-	if (IS_ERR_OR_NULL(sta))
-		return;
-
-	mvmsta = iwl_mvm_sta_from_mac80211(sta);
-
-	data->num_bss_ifaces++;
-
-	/*
-	 * This interface doesn't support reduced Tx power (because of low
-	 * RSSI probably), then set bt_kill_msk to default values.
-	 */
-	if (!mvmsta->bt_reduced_txpower)
-		data->reduced_tx_power = false;
-	/* else - possibly leave it to BT_KILL_MSK_REDUCED_TXPOW */
-}
-
-void iwl_mvm_bt_rssi_event(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
-			   enum ieee80211_rssi_event rssi_event)
-{
-	struct iwl_mvm_vif *mvmvif = (void *)vif->drv_priv;
-	struct iwl_bt_iterator_data data = {
-		.mvm = mvm,
-		.reduced_tx_power = true,
-	};
-	int ret;
-
-	lockdep_assert_held(&mvm->mutex);
-
-	/* Rssi update while not associated ?! */
-	if (WARN_ON_ONCE(mvmvif->ap_sta_id == IWL_MVM_STATION_COUNT))
-		return;
-
-	/* No BT - reports should be disabled */
-	if (!mvm->last_bt_notif.bt_status)
-		return;
-
-	IWL_DEBUG_COEX(mvm, "RSSI for %pM is now %s\n", vif->bss_conf.bssid,
-		       rssi_event == RSSI_EVENT_HIGH ? "HIGH" : "LOW");
-
-	/*
-	 * Check if rssi is good enough for reduced Tx power, but not in loose
-	 * scheme.
-	 */
-	if (rssi_event == RSSI_EVENT_LOW || mvm->cfg->bt_shared_single_ant ||
-	    iwl_get_coex_type(mvm, vif) == BT_COEX_LOOSE_LUT)
-		ret = iwl_mvm_bt_coex_reduced_txp(mvm, mvmvif->ap_sta_id,
-						  false);
-	else
-		ret = iwl_mvm_bt_coex_reduced_txp(mvm, mvmvif->ap_sta_id, true);
-
-	if (ret)
-		IWL_ERR(mvm, "couldn't send BT_CONFIG HCMD upon RSSI event\n");
-
-	ieee80211_iterate_active_interfaces_atomic(
-		mvm->hw, IEEE80211_IFACE_ITER_NORMAL,
-		iwl_mvm_bt_rssi_iterator, &data);
-
-	/*
-	 * If there are no BSS / P2P client interfaces, reduced Tx Power is
-	 * irrelevant since it is based on the RSSI coming from the beacon.
-	 * Use BT_KILL_MSK_DEFAULT in that case.
-	 */
-	data.reduced_tx_power = data.reduced_tx_power && data.num_bss_ifaces;
-
-	if (iwl_mvm_bt_udpate_ctrl_kill_msk(mvm, data.reduced_tx_power))
-		IWL_ERR(mvm, "Failed to update the ctrl_kill_msk\n");
-}
-
-#define LINK_QUAL_AGG_TIME_LIMIT_DEF	(4000)
-#define LINK_QUAL_AGG_TIME_LIMIT_BT_ACT	(1200)
-
-u16 iwl_mvm_bt_coex_agg_time_limit(struct iwl_mvm *mvm,
-				   struct ieee80211_sta *sta)
-{
-	struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta);
-	enum iwl_bt_coex_lut_type lut_type;
-
-	if (le32_to_cpu(mvm->last_bt_notif.bt_activity_grading) <
-	    BT_HIGH_TRAFFIC)
-		return LINK_QUAL_AGG_TIME_LIMIT_DEF;
-
-	lut_type = iwl_get_coex_type(mvm, mvmsta->vif);
-
-	if (lut_type == BT_COEX_LOOSE_LUT)
-		return LINK_QUAL_AGG_TIME_LIMIT_DEF;
-
-	/* tight coex, high bt traffic, reduce AGG time limit */
-	return LINK_QUAL_AGG_TIME_LIMIT_BT_ACT;
-}
-
-bool iwl_mvm_bt_coex_is_mimo_allowed(struct iwl_mvm *mvm,
-				     struct ieee80211_sta *sta)
-{
-	struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta);
-
-	if (le32_to_cpu(mvm->last_bt_notif.bt_activity_grading) <
-	    BT_HIGH_TRAFFIC)
-		return true;
-
-	/*
-	 * In Tight, BT can't Rx while we Tx, so use both antennas since BT is
-	 * already killed.
-	 * In Loose, BT can Rx while we Tx, so forbid MIMO to let BT Rx while we
-	 * Tx.
-	 */
-	return iwl_get_coex_type(mvm, mvmsta->vif) == BT_COEX_TIGHT_LUT;
-}
-
-void iwl_mvm_bt_coex_vif_change(struct iwl_mvm *mvm)
-{
-	if (!(mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_NEWBT_COEX))
-		return;
-
-	iwl_mvm_bt_coex_notif_handle(mvm);
-}
-
-int iwl_mvm_rx_ant_coupling_notif(struct iwl_mvm *mvm,
-				  struct iwl_rx_cmd_buffer *rxb,
-				  struct iwl_device_cmd *dev_cmd)
-{
-	struct iwl_rx_packet *pkt = rxb_addr(rxb);
-	u32 ant_isolation = le32_to_cpup((void *)pkt->data);
-	u8 __maybe_unused lower_bound, upper_bound;
-	u8 lut;
-
-	struct iwl_bt_coex_cmd *bt_cmd;
-	struct iwl_host_cmd cmd = {
-		.id = BT_CONFIG,
-		.len = { sizeof(*bt_cmd), },
-		.dataflags = { IWL_HCMD_DFL_NOCOPY, },
-		.flags = CMD_SYNC,
-	};
-
-	if (!IWL_MVM_BT_COEX_CORUNNING)
-		return 0;
-
-	lockdep_assert_held(&mvm->mutex);
-
-	if (ant_isolation ==  mvm->last_ant_isol)
-		return 0;
-
-	for (lut = 0; lut < ARRAY_SIZE(antenna_coupling_ranges) - 1; lut++)
-		if (ant_isolation < antenna_coupling_ranges[lut + 1].range)
-			break;
-
-	lower_bound = antenna_coupling_ranges[lut].range;
-
-	if (lut < ARRAY_SIZE(antenna_coupling_ranges) - 1)
-		upper_bound = antenna_coupling_ranges[lut + 1].range;
-	else
-		upper_bound = antenna_coupling_ranges[lut].range;
-
-	IWL_DEBUG_COEX(mvm, "Antenna isolation=%d in range [%d,%d[, lut=%d\n",
-		       ant_isolation, lower_bound, upper_bound, lut);
-
-	mvm->last_ant_isol = ant_isolation;
-
-	if (mvm->last_corun_lut == lut)
-		return 0;
-
-	mvm->last_corun_lut = lut;
-
-	bt_cmd = kzalloc(sizeof(*bt_cmd), GFP_KERNEL);
-	if (!bt_cmd)
-		return 0;
-	cmd.data[0] = bt_cmd;
-
-	bt_cmd->flags = cpu_to_le32(BT_COEX_NW);
-	bt_cmd->valid_bit_msk |= cpu_to_le32(BT_VALID_ENABLE |
-					     BT_VALID_CORUN_LUT_20 |
-					     BT_VALID_CORUN_LUT_40);
-
-	/* For the moment, use the same LUT for 20GHz and 40GHz */
-	memcpy(bt_cmd->bt4_corun_lut20, antenna_coupling_ranges[lut].lut20,
-	       sizeof(bt_cmd->bt4_corun_lut20));
-
-	memcpy(bt_cmd->bt4_corun_lut40, antenna_coupling_ranges[lut].lut20,
-	       sizeof(bt_cmd->bt4_corun_lut40));
-
-	return 0;
-}
diff --git a/drivers/net/wireless/iwlwifi/mvm/coex.c b/drivers/net/wireless/iwlwifi/mvm/coex.c
new file mode 100644
index 000000000000..0b2e351d4e52
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/mvm/coex.c
@@ -0,0 +1,1280 @@
+/******************************************************************************
+ *
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2013 - 2014 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called COPYING.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2013 - 2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *  * Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  * Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  * Neither the name Intel Corporation nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *****************************************************************************/
+
+#include <net/mac80211.h>
+
+#include "fw-api-coex.h"
+#include "iwl-modparams.h"
+#include "mvm.h"
+#include "iwl-debug.h"
+
+#define EVENT_PRIO_ANT(_evt, _prio, _shrd_ant)			\
+	[(_evt)] = (((_prio) << BT_COEX_PRIO_TBL_PRIO_POS) |	\
+		   ((_shrd_ant) << BT_COEX_PRIO_TBL_SHRD_ANT_POS))
+
+static const u8 iwl_bt_prio_tbl[BT_COEX_PRIO_TBL_EVT_MAX] = {
+	EVENT_PRIO_ANT(BT_COEX_PRIO_TBL_EVT_INIT_CALIB1,
+		       BT_COEX_PRIO_TBL_PRIO_BYPASS, 0),
+	EVENT_PRIO_ANT(BT_COEX_PRIO_TBL_EVT_INIT_CALIB2,
+		       BT_COEX_PRIO_TBL_PRIO_BYPASS, 1),
+	EVENT_PRIO_ANT(BT_COEX_PRIO_TBL_EVT_PERIODIC_CALIB_LOW1,
+		       BT_COEX_PRIO_TBL_PRIO_LOW, 0),
+	EVENT_PRIO_ANT(BT_COEX_PRIO_TBL_EVT_PERIODIC_CALIB_LOW2,
+		       BT_COEX_PRIO_TBL_PRIO_LOW, 1),
+	EVENT_PRIO_ANT(BT_COEX_PRIO_TBL_EVT_PERIODIC_CALIB_HIGH1,
+		       BT_COEX_PRIO_TBL_PRIO_HIGH, 0),
+	EVENT_PRIO_ANT(BT_COEX_PRIO_TBL_EVT_PERIODIC_CALIB_HIGH2,
+		       BT_COEX_PRIO_TBL_PRIO_HIGH, 1),
+	EVENT_PRIO_ANT(BT_COEX_PRIO_TBL_EVT_DTIM,
+		       BT_COEX_PRIO_TBL_DISABLED, 0),
+	EVENT_PRIO_ANT(BT_COEX_PRIO_TBL_EVT_SCAN52,
+		       BT_COEX_PRIO_TBL_PRIO_COEX_OFF, 0),
+	EVENT_PRIO_ANT(BT_COEX_PRIO_TBL_EVT_SCAN24,
+		       BT_COEX_PRIO_TBL_PRIO_COEX_ON, 0),
+	EVENT_PRIO_ANT(BT_COEX_PRIO_TBL_EVT_IDLE,
+		       BT_COEX_PRIO_TBL_PRIO_COEX_IDLE, 0),
+	0, 0, 0, 0, 0, 0,
+};
+
+#undef EVENT_PRIO_ANT
+
+#define BT_ENABLE_REDUCED_TXPOWER_THRESHOLD	(-62)
+#define BT_DISABLE_REDUCED_TXPOWER_THRESHOLD	(-65)
+#define BT_ANTENNA_COUPLING_THRESHOLD		(30)
+
+int iwl_send_bt_prio_tbl(struct iwl_mvm *mvm)
+{
+	if (!(mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_NEWBT_COEX))
+		return 0;
+
+	return iwl_mvm_send_cmd_pdu(mvm, BT_COEX_PRIO_TABLE, CMD_SYNC,
+				    sizeof(struct iwl_bt_coex_prio_tbl_cmd),
+				    &iwl_bt_prio_tbl);
+}
+
+const u32 iwl_bt_ack_kill_msk[BT_KILL_MSK_MAX] = {
+	[BT_KILL_MSK_DEFAULT] = 0xffff0000,
+	[BT_KILL_MSK_SCO_HID_A2DP] = 0xffffffff,
+	[BT_KILL_MSK_REDUCED_TXPOW] = 0,
+};
+
+const u32 iwl_bt_cts_kill_msk[BT_KILL_MSK_MAX] = {
+	[BT_KILL_MSK_DEFAULT] = 0xffff0000,
+	[BT_KILL_MSK_SCO_HID_A2DP] = 0xffffffff,
+	[BT_KILL_MSK_REDUCED_TXPOW] = 0,
+};
+
+static const __le32 iwl_bt_prio_boost[BT_COEX_BOOST_SIZE] = {
+	cpu_to_le32(0xf0f0f0f0),
+	cpu_to_le32(0xc0c0c0c0),
+	cpu_to_le32(0xfcfcfcfc),
+	cpu_to_le32(0xff00ff00),
+};
+
+static const __le32 iwl_single_shared_ant[BT_COEX_MAX_LUT][BT_COEX_LUT_SIZE] = {
+	{
+		cpu_to_le32(0x40000000),
+		cpu_to_le32(0x00000000),
+		cpu_to_le32(0x44000000),
+		cpu_to_le32(0x00000000),
+		cpu_to_le32(0x40000000),
+		cpu_to_le32(0x00000000),
+		cpu_to_le32(0x44000000),
+		cpu_to_le32(0x00000000),
+		cpu_to_le32(0xc0004000),
+		cpu_to_le32(0xf0005000),
+		cpu_to_le32(0xc0004000),
+		cpu_to_le32(0xf0005000),
+	},
+	{
+		cpu_to_le32(0x40000000),
+		cpu_to_le32(0x00000000),
+		cpu_to_le32(0x44000000),
+		cpu_to_le32(0x00000000),
+		cpu_to_le32(0x40000000),
+		cpu_to_le32(0x00000000),
+		cpu_to_le32(0x44000000),
+		cpu_to_le32(0x00000000),
+		cpu_to_le32(0xc0004000),
+		cpu_to_le32(0xf0005000),
+		cpu_to_le32(0xc0004000),
+		cpu_to_le32(0xf0005000),
+	},
+	{
+		cpu_to_le32(0x40000000),
+		cpu_to_le32(0x00000000),
+		cpu_to_le32(0x44000000),
+		cpu_to_le32(0x00000000),
+		cpu_to_le32(0x40000000),
+		cpu_to_le32(0x00000000),
+		cpu_to_le32(0x44000000),
+		cpu_to_le32(0x00000000),
+		cpu_to_le32(0xc0004000),
+		cpu_to_le32(0xf0005000),
+		cpu_to_le32(0xc0004000),
+		cpu_to_le32(0xf0005000),
+	},
+};
+
+static const __le32 iwl_combined_lookup[BT_COEX_MAX_LUT][BT_COEX_LUT_SIZE] = {
+	{
+		/* Tight */
+		cpu_to_le32(0xaaaaaaaa),
+		cpu_to_le32(0xaaaaaaaa),
+		cpu_to_le32(0xaeaaaaaa),
+		cpu_to_le32(0xaaaaaaaa),
+		cpu_to_le32(0xcc00ff28),
+		cpu_to_le32(0x0000aaaa),
+		cpu_to_le32(0xcc00aaaa),
+		cpu_to_le32(0x0000aaaa),
+		cpu_to_le32(0xc0004000),
+		cpu_to_le32(0x00000000),
+		cpu_to_le32(0xf0005000),
+		cpu_to_le32(0xf0005000),
+	},
+	{
+		/* Loose */
+		cpu_to_le32(0xaaaaaaaa),
+		cpu_to_le32(0xaaaaaaaa),
+		cpu_to_le32(0xaaaaaaaa),
+		cpu_to_le32(0xaaaaaaaa),
+		cpu_to_le32(0xcc00ff28),
+		cpu_to_le32(0x0000aaaa),
+		cpu_to_le32(0xcc00aaaa),
+		cpu_to_le32(0x0000aaaa),
+		cpu_to_le32(0x00000000),
+		cpu_to_le32(0x00000000),
+		cpu_to_le32(0xf0005000),
+		cpu_to_le32(0xf0005000),
+	},
+	{
+		/* Tx Tx disabled */
+		cpu_to_le32(0xaaaaaaaa),
+		cpu_to_le32(0xaaaaaaaa),
+		cpu_to_le32(0xaaaaaaaa),
+		cpu_to_le32(0xaaaaaaaa),
+		cpu_to_le32(0xcc00ff28),
+		cpu_to_le32(0x0000aaaa),
+		cpu_to_le32(0xcc00aaaa),
+		cpu_to_le32(0x0000aaaa),
+		cpu_to_le32(0xC0004000),
+		cpu_to_le32(0xC0004000),
+		cpu_to_le32(0xF0005000),
+		cpu_to_le32(0xF0005000),
+	},
+};
+
+/* 20MHz / 40MHz below / 40Mhz above*/
+static const __le64 iwl_ci_mask[][3] = {
+	/* dummy entry for channel 0 */
+	{cpu_to_le64(0), cpu_to_le64(0), cpu_to_le64(0)},
+	{
+		cpu_to_le64(0x0000001FFFULL),
+		cpu_to_le64(0x0ULL),
+		cpu_to_le64(0x00007FFFFFULL),
+	},
+	{
+		cpu_to_le64(0x000000FFFFULL),
+		cpu_to_le64(0x0ULL),
+		cpu_to_le64(0x0003FFFFFFULL),
+	},
+	{
+		cpu_to_le64(0x000003FFFCULL),
+		cpu_to_le64(0x0ULL),
+		cpu_to_le64(0x000FFFFFFCULL),
+	},
+	{
+		cpu_to_le64(0x00001FFFE0ULL),
+		cpu_to_le64(0x0ULL),
+		cpu_to_le64(0x007FFFFFE0ULL),
+	},
+	{
+		cpu_to_le64(0x00007FFF80ULL),
+		cpu_to_le64(0x00007FFFFFULL),
+		cpu_to_le64(0x01FFFFFF80ULL),
+	},
+	{
+		cpu_to_le64(0x0003FFFC00ULL),
+		cpu_to_le64(0x0003FFFFFFULL),
+		cpu_to_le64(0x0FFFFFFC00ULL),
+	},
+	{
+		cpu_to_le64(0x000FFFF000ULL),
+		cpu_to_le64(0x000FFFFFFCULL),
+		cpu_to_le64(0x3FFFFFF000ULL),
+	},
+	{
+		cpu_to_le64(0x007FFF8000ULL),
+		cpu_to_le64(0x007FFFFFE0ULL),
+		cpu_to_le64(0xFFFFFF8000ULL),
+	},
+	{
+		cpu_to_le64(0x01FFFE0000ULL),
+		cpu_to_le64(0x01FFFFFF80ULL),
+		cpu_to_le64(0xFFFFFE0000ULL),
+	},
+	{
+		cpu_to_le64(0x0FFFF00000ULL),
+		cpu_to_le64(0x0FFFFFFC00ULL),
+		cpu_to_le64(0x0ULL),
+	},
+	{
+		cpu_to_le64(0x3FFFC00000ULL),
+		cpu_to_le64(0x3FFFFFF000ULL),
+		cpu_to_le64(0x0)
+	},
+	{
+		cpu_to_le64(0xFFFE000000ULL),
+		cpu_to_le64(0xFFFFFF8000ULL),
+		cpu_to_le64(0x0)
+	},
+	{
+		cpu_to_le64(0xFFF8000000ULL),
+		cpu_to_le64(0xFFFFFE0000ULL),
+		cpu_to_le64(0x0)
+	},
+	{
+		cpu_to_le64(0xFFC0000000ULL),
+		cpu_to_le64(0x0ULL),
+		cpu_to_le64(0x0ULL)
+	},
+};
+
+static const __le32 iwl_bt_mprio_lut[BT_COEX_MULTI_PRIO_LUT_SIZE] = {
+	cpu_to_le32(0x22002200),
+	cpu_to_le32(0x33113311),
+};
+
+struct corunning_block_luts {
+	u8 range;
+	__le32 lut20[BT_COEX_CORUN_LUT_SIZE];
+};
+
+/*
+ * Ranges for the antenna coupling calibration / co-running block LUT:
+ *		LUT0: [ 0, 12[
+ *		LUT1: [12, 20[
+ *		LUT2: [20, 21[
+ *		LUT3: [21, 23[
+ *		LUT4: [23, 27[
+ *		LUT5: [27, 30[
+ *		LUT6: [30, 32[
+ *		LUT7: [32, 33[
+ *		LUT8: [33, - [
+ */
+static const struct corunning_block_luts antenna_coupling_ranges[] = {
+	{
+		.range = 0,
+		.lut20 = {
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+		},
+	},
+	{
+		.range = 12,
+		.lut20 = {
+			cpu_to_le32(0x00000001),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+		},
+	},
+	{
+		.range = 20,
+		.lut20 = {
+			cpu_to_le32(0x00000002),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+		},
+	},
+	{
+		.range = 21,
+		.lut20 = {
+			cpu_to_le32(0x00000003),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+		},
+	},
+	{
+		.range = 23,
+		.lut20 = {
+			cpu_to_le32(0x00000004),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+		},
+	},
+	{
+		.range = 27,
+		.lut20 = {
+			cpu_to_le32(0x00000005),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+		},
+	},
+	{
+		.range = 30,
+		.lut20 = {
+			cpu_to_le32(0x00000006),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+		},
+	},
+	{
+		.range = 32,
+		.lut20 = {
+			cpu_to_le32(0x00000007),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+		},
+	},
+	{
+		.range = 33,
+		.lut20 = {
+			cpu_to_le32(0x00000008),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+			cpu_to_le32(0x00000000),  cpu_to_le32(0x00000000),
+		},
+	},
+};
+
+static enum iwl_bt_coex_lut_type
+iwl_get_coex_type(struct iwl_mvm *mvm, const struct ieee80211_vif *vif)
+{
+	struct ieee80211_chanctx_conf *chanctx_conf;
+	enum iwl_bt_coex_lut_type ret;
+	u16 phy_ctx_id;
+
+	/*
+	 * Checking that we hold mvm->mutex is a good idea, but the rate
+	 * control can't acquire the mutex since it runs in Tx path.
+	 * So this is racy in that case, but in the worst case, the AMPDU
+	 * size limit will be wrong for a short time which is not a big
+	 * issue.
+	 */
+
+	rcu_read_lock();
+
+	chanctx_conf = rcu_dereference(vif->chanctx_conf);
+
+	if (!chanctx_conf ||
+	     chanctx_conf->def.chan->band != IEEE80211_BAND_2GHZ) {
+		rcu_read_unlock();
+		return BT_COEX_LOOSE_LUT;
+	}
+
+	ret = BT_COEX_TX_DIS_LUT;
+
+	if (mvm->cfg->bt_shared_single_ant) {
+		rcu_read_unlock();
+		return ret;
+	}
+
+	phy_ctx_id = *((u16 *)chanctx_conf->drv_priv);
+
+	if (mvm->last_bt_ci_cmd.primary_ch_phy_id == phy_ctx_id)
+		ret = le32_to_cpu(mvm->last_bt_notif.primary_ch_lut);
+	else if (mvm->last_bt_ci_cmd.secondary_ch_phy_id == phy_ctx_id)
+		ret = le32_to_cpu(mvm->last_bt_notif.secondary_ch_lut);
+	/* else - default = TX TX disallowed */
+
+	rcu_read_unlock();
+
+	return ret;
+}
+
+int iwl_send_bt_init_conf(struct iwl_mvm *mvm)
+{
+	struct iwl_bt_coex_cmd *bt_cmd;
+	struct iwl_host_cmd cmd = {
+		.id = BT_CONFIG,
+		.len = { sizeof(*bt_cmd), },
+		.dataflags = { IWL_HCMD_DFL_NOCOPY, },
+		.flags = CMD_SYNC,
+	};
+	int ret;
+	u32 flags;
+
+	if (!(mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_NEWBT_COEX))
+		return 0;
+
+	bt_cmd = kzalloc(sizeof(*bt_cmd), GFP_KERNEL);
+	if (!bt_cmd)
+		return -ENOMEM;
+	cmd.data[0] = bt_cmd;
+
+	bt_cmd->max_kill = 5;
+	bt_cmd->bt4_antenna_isolation_thr = BT_ANTENNA_COUPLING_THRESHOLD,
+	bt_cmd->bt4_antenna_isolation = iwlwifi_mod_params.ant_coupling,
+	bt_cmd->bt4_tx_tx_delta_freq_thr = 15,
+	bt_cmd->bt4_tx_rx_max_freq0 = 15,
+
+	flags = iwlwifi_mod_params.bt_coex_active ?
+			BT_COEX_NW : BT_COEX_DISABLE;
+	bt_cmd->flags = cpu_to_le32(flags);
+
+	bt_cmd->valid_bit_msk = cpu_to_le32(BT_VALID_ENABLE |
+					    BT_VALID_BT_PRIO_BOOST |
+					    BT_VALID_MAX_KILL |
+					    BT_VALID_3W_TMRS |
+					    BT_VALID_KILL_ACK |
+					    BT_VALID_KILL_CTS |
+					    BT_VALID_REDUCED_TX_POWER |
+					    BT_VALID_LUT |
+					    BT_VALID_WIFI_RX_SW_PRIO_BOOST |
+					    BT_VALID_WIFI_TX_SW_PRIO_BOOST |
+					    BT_VALID_ANT_ISOLATION |
+					    BT_VALID_ANT_ISOLATION_THRS |
+					    BT_VALID_TXTX_DELTA_FREQ_THRS |
+					    BT_VALID_TXRX_MAX_FREQ_0 |
+					    BT_VALID_SYNC_TO_SCO);
+
+	if (IWL_MVM_BT_COEX_SYNC2SCO)
+		bt_cmd->flags |= cpu_to_le32(BT_COEX_SYNC2SCO);
+
+	if (IWL_MVM_BT_COEX_CORUNNING) {
+		bt_cmd->valid_bit_msk = cpu_to_le32(BT_VALID_CORUN_LUT_20 |
+						    BT_VALID_CORUN_LUT_40);
+		bt_cmd->flags |= cpu_to_le32(BT_COEX_CORUNNING);
+	}
+
+	if (mvm->cfg->bt_shared_single_ant)
+		memcpy(&bt_cmd->decision_lut, iwl_single_shared_ant,
+		       sizeof(iwl_single_shared_ant));
+	else
+		memcpy(&bt_cmd->decision_lut, iwl_combined_lookup,
+		       sizeof(iwl_combined_lookup));
+
+	/* Take first Co-running block LUT to get started */
+	memcpy(bt_cmd->bt4_corun_lut20, antenna_coupling_ranges[0].lut20,
+	       sizeof(bt_cmd->bt4_corun_lut20));
+	memcpy(bt_cmd->bt4_corun_lut40, antenna_coupling_ranges[0].lut20,
+	       sizeof(bt_cmd->bt4_corun_lut40));
+
+	memcpy(&bt_cmd->bt_prio_boost, iwl_bt_prio_boost,
+	       sizeof(iwl_bt_prio_boost));
+	memcpy(&bt_cmd->bt4_multiprio_lut, iwl_bt_mprio_lut,
+	       sizeof(iwl_bt_mprio_lut));
+	bt_cmd->kill_ack_msk =
+		cpu_to_le32(iwl_bt_ack_kill_msk[BT_KILL_MSK_DEFAULT]);
+	bt_cmd->kill_cts_msk =
+		cpu_to_le32(iwl_bt_cts_kill_msk[BT_KILL_MSK_DEFAULT]);
+
+	memset(&mvm->last_bt_notif, 0, sizeof(mvm->last_bt_notif));
+	memset(&mvm->last_bt_ci_cmd, 0, sizeof(mvm->last_bt_ci_cmd));
+
+	ret = iwl_mvm_send_cmd(mvm, &cmd);
+
+	kfree(bt_cmd);
+	return ret;
+}
+
+static int iwl_mvm_bt_udpate_ctrl_kill_msk(struct iwl_mvm *mvm,
+					   bool reduced_tx_power)
+{
+	enum iwl_bt_kill_msk bt_kill_msk;
+	struct iwl_bt_coex_cmd *bt_cmd;
+	struct iwl_bt_coex_profile_notif *notif = &mvm->last_bt_notif;
+	struct iwl_host_cmd cmd = {
+		.id = BT_CONFIG,
+		.data[0] = &bt_cmd,
+		.len = { sizeof(*bt_cmd), },
+		.dataflags = { IWL_HCMD_DFL_NOCOPY, },
+		.flags = CMD_SYNC,
+	};
+	int ret = 0;
+
+	lockdep_assert_held(&mvm->mutex);
+
+	if (reduced_tx_power) {
+		/* Reduced Tx power has precedence on the type of the profile */
+		bt_kill_msk = BT_KILL_MSK_REDUCED_TXPOW;
+	} else {
+		/* Low latency BT profile is active: give higher prio to BT */
+		if (BT_MBOX_MSG(notif, 3, SCO_STATE)  ||
+		    BT_MBOX_MSG(notif, 3, A2DP_STATE) ||
+		    BT_MBOX_MSG(notif, 3, SNIFF_STATE))
+			bt_kill_msk = BT_KILL_MSK_SCO_HID_A2DP;
+		else
+			bt_kill_msk = BT_KILL_MSK_DEFAULT;
+	}
+
+	IWL_DEBUG_COEX(mvm,
+		       "Update kill_msk: %d - SCO %sactive A2DP %sactive SNIFF %sactive\n",
+		       bt_kill_msk,
+		       BT_MBOX_MSG(notif, 3, SCO_STATE) ? "" : "in",
+		       BT_MBOX_MSG(notif, 3, A2DP_STATE) ? "" : "in",
+		       BT_MBOX_MSG(notif, 3, SNIFF_STATE) ? "" : "in");
+
+	/* Don't send HCMD if there is no update */
+	if (bt_kill_msk == mvm->bt_kill_msk)
+		return 0;
+
+	mvm->bt_kill_msk = bt_kill_msk;
+
+	bt_cmd = kzalloc(sizeof(*bt_cmd), GFP_KERNEL);
+	if (!bt_cmd)
+		return -ENOMEM;
+	cmd.data[0] = bt_cmd;
+	bt_cmd->flags = cpu_to_le32(BT_COEX_NW);
+
+	bt_cmd->kill_ack_msk = cpu_to_le32(iwl_bt_ack_kill_msk[bt_kill_msk]);
+	bt_cmd->kill_cts_msk = cpu_to_le32(iwl_bt_cts_kill_msk[bt_kill_msk]);
+	bt_cmd->valid_bit_msk |= cpu_to_le32(BT_VALID_ENABLE |
+					     BT_VALID_KILL_ACK |
+					     BT_VALID_KILL_CTS);
+
+	IWL_DEBUG_COEX(mvm, "ACK Kill msk = 0x%08x, CTS Kill msk = 0x%08x\n",
+		       iwl_bt_ack_kill_msk[bt_kill_msk],
+		       iwl_bt_cts_kill_msk[bt_kill_msk]);
+
+	ret = iwl_mvm_send_cmd(mvm, &cmd);
+
+	kfree(bt_cmd);
+	return ret;
+}
+
+int iwl_mvm_bt_coex_reduced_txp(struct iwl_mvm *mvm, u8 sta_id, bool enable)
+{
+	struct iwl_bt_coex_cmd *bt_cmd;
+	/* Send ASYNC since this can be sent from an atomic context */
+	struct iwl_host_cmd cmd = {
+		.id = BT_CONFIG,
+		.len = { sizeof(*bt_cmd), },
+		.dataflags = { IWL_HCMD_DFL_NOCOPY, },
+		.flags = CMD_ASYNC,
+	};
+	struct iwl_mvm_sta *mvmsta;
+	int ret;
+
+	mvmsta = iwl_mvm_sta_from_staid_protected(mvm, sta_id);
+	if (!mvmsta)
+		return 0;
+
+	/* nothing to do */
+	if (mvmsta->bt_reduced_txpower_dbg ||
+	    mvmsta->bt_reduced_txpower == enable)
+		return 0;
+
+	bt_cmd = kzalloc(sizeof(*bt_cmd), GFP_ATOMIC);
+	if (!bt_cmd)
+		return -ENOMEM;
+	cmd.data[0] = bt_cmd;
+	bt_cmd->flags = cpu_to_le32(BT_COEX_NW);
+
+	bt_cmd->valid_bit_msk =
+		cpu_to_le32(BT_VALID_ENABLE | BT_VALID_REDUCED_TX_POWER);
+	bt_cmd->bt_reduced_tx_power = sta_id;
+
+	if (enable)
+		bt_cmd->bt_reduced_tx_power |= BT_REDUCED_TX_POWER_BIT;
+
+	IWL_DEBUG_COEX(mvm, "%sable reduced Tx Power for sta %d\n",
+		       enable ? "en" : "dis", sta_id);
+
+	mvmsta->bt_reduced_txpower = enable;
+
+	ret = iwl_mvm_send_cmd(mvm, &cmd);
+
+	kfree(bt_cmd);
+	return ret;
+}
+
+struct iwl_bt_iterator_data {
+	struct iwl_bt_coex_profile_notif *notif;
+	struct iwl_mvm *mvm;
+	u32 num_bss_ifaces;
+	bool reduced_tx_power;
+	struct ieee80211_chanctx_conf *primary;
+	struct ieee80211_chanctx_conf *secondary;
+	bool primary_ll;
+};
+
+static inline
+void iwl_mvm_bt_coex_enable_rssi_event(struct iwl_mvm *mvm,
+				       struct ieee80211_vif *vif,
+				       bool enable, int rssi)
+{
+	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
+
+	mvmvif->bf_data.last_bt_coex_event = rssi;
+	mvmvif->bf_data.bt_coex_max_thold =
+		enable ? BT_ENABLE_REDUCED_TXPOWER_THRESHOLD : 0;
+	mvmvif->bf_data.bt_coex_min_thold =
+		enable ? BT_DISABLE_REDUCED_TXPOWER_THRESHOLD : 0;
+}
+
+/* must be called under rcu_read_lock */
+static void iwl_mvm_bt_notif_iterator(void *_data, u8 *mac,
+				      struct ieee80211_vif *vif)
+{
+	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
+	struct iwl_bt_iterator_data *data = _data;
+	struct iwl_mvm *mvm = data->mvm;
+	struct ieee80211_chanctx_conf *chanctx_conf;
+	enum ieee80211_smps_mode smps_mode;
+	u32 bt_activity_grading;
+	int ave_rssi;
+
+	lockdep_assert_held(&mvm->mutex);
+
+	switch (vif->type) {
+	case NL80211_IFTYPE_STATION:
+		/* default smps_mode for BSS / P2P client is AUTOMATIC */
+		smps_mode = IEEE80211_SMPS_AUTOMATIC;
+		data->num_bss_ifaces++;
+
+		/*
+		 * Count unassoc BSSes, relax SMSP constraints
+		 * and disable reduced Tx Power
+		 */
+		if (!vif->bss_conf.assoc) {
+			iwl_mvm_update_smps(mvm, vif, IWL_MVM_SMPS_REQ_BT_COEX,
+					    smps_mode);
+			if (iwl_mvm_bt_coex_reduced_txp(mvm,
+							mvmvif->ap_sta_id,
+							false))
+				IWL_ERR(mvm, "Couldn't send BT_CONFIG cmd\n");
+			return;
+		}
+		break;
+	case NL80211_IFTYPE_AP:
+		/* default smps_mode for AP / GO is OFF */
+		smps_mode = IEEE80211_SMPS_OFF;
+		if (!mvmvif->ap_ibss_active) {
+			iwl_mvm_update_smps(mvm, vif, IWL_MVM_SMPS_REQ_BT_COEX,
+					    smps_mode);
+			return;
+		}
+
+		/* the Ack / Cts kill mask must be default if AP / GO */
+		data->reduced_tx_power = false;
+		break;
+	default:
+		return;
+	}
+
+	chanctx_conf = rcu_dereference(vif->chanctx_conf);
+
+	/* If channel context is invalid or not on 2.4GHz .. */
+	if ((!chanctx_conf ||
+	     chanctx_conf->def.chan->band != IEEE80211_BAND_2GHZ)) {
+		/* ... relax constraints and disable rssi events */
+		iwl_mvm_update_smps(mvm, vif, IWL_MVM_SMPS_REQ_BT_COEX,
+				    smps_mode);
+		if (vif->type == NL80211_IFTYPE_STATION)
+			iwl_mvm_bt_coex_enable_rssi_event(mvm, vif, false, 0);
+		return;
+	}
+
+	bt_activity_grading = le32_to_cpu(data->notif->bt_activity_grading);
+	if (bt_activity_grading >= BT_HIGH_TRAFFIC)
+		smps_mode = IEEE80211_SMPS_STATIC;
+	else if (bt_activity_grading >= BT_LOW_TRAFFIC)
+		smps_mode = vif->type == NL80211_IFTYPE_AP ?
+				IEEE80211_SMPS_OFF :
+				IEEE80211_SMPS_DYNAMIC;
+	IWL_DEBUG_COEX(data->mvm,
+		       "mac %d: bt_status %d bt_activity_grading %d smps_req %d\n",
+		       mvmvif->id, data->notif->bt_status, bt_activity_grading,
+		       smps_mode);
+
+	iwl_mvm_update_smps(mvm, vif, IWL_MVM_SMPS_REQ_BT_COEX, smps_mode);
+
+	/* low latency is always primary */
+	if (iwl_mvm_vif_low_latency(mvmvif)) {
+		data->primary_ll = true;
+
+		data->secondary = data->primary;
+		data->primary = chanctx_conf;
+	}
+
+	if (vif->type == NL80211_IFTYPE_AP) {
+		if (!mvmvif->ap_ibss_active)
+			return;
+
+		if (chanctx_conf == data->primary)
+			return;
+
+		if (!data->primary_ll) {
+			/*
+			 * downgrade the current primary no matter what its
+			 * type is.
+			 */
+			data->secondary = data->primary;
+			data->primary = chanctx_conf;
+		} else {
+			/* there is low latency vif - we will be secondary */
+			data->secondary = chanctx_conf;
+		}
+		return;
+	}
+
+	/*
+	 * STA / P2P Client, try to be primary if first vif. If we are in low
+	 * latency mode, we are already in primary and just don't do much
+	 */
+	if (!data->primary || data->primary == chanctx_conf)
+		data->primary = chanctx_conf;
+	else if (!data->secondary)
+		/* if secondary is not NULL, it might be a GO */
+		data->secondary = chanctx_conf;
+
+	/* don't reduce the Tx power if in loose scheme */
+	if (iwl_get_coex_type(mvm, vif) == BT_COEX_LOOSE_LUT ||
+	    mvm->cfg->bt_shared_single_ant) {
+		data->reduced_tx_power = false;
+		iwl_mvm_bt_coex_enable_rssi_event(mvm, vif, false, 0);
+		return;
+	}
+
+	/* reduced Txpower only if BT is on, so ...*/
+	if (!data->notif->bt_status) {
+		/* ... cancel reduced Tx power ... */
+		if (iwl_mvm_bt_coex_reduced_txp(mvm, mvmvif->ap_sta_id, false))
+			IWL_ERR(mvm, "Couldn't send BT_CONFIG cmd\n");
+		data->reduced_tx_power = false;
+
+		/* ... and there is no need to get reports on RSSI any more. */
+		iwl_mvm_bt_coex_enable_rssi_event(mvm, vif, false, 0);
+		return;
+	}
+
+	/* try to get the avg rssi from fw */
+	ave_rssi = mvmvif->bf_data.ave_beacon_signal;
+
+	/* if the RSSI isn't valid, fake it is very low */
+	if (!ave_rssi)
+		ave_rssi = -100;
+	if (ave_rssi > BT_ENABLE_REDUCED_TXPOWER_THRESHOLD) {
+		if (iwl_mvm_bt_coex_reduced_txp(mvm, mvmvif->ap_sta_id, true))
+			IWL_ERR(mvm, "Couldn't send BT_CONFIG cmd\n");
+
+		/*
+		 * bt_kill_msk can be BT_KILL_MSK_REDUCED_TXPOW only if all the
+		 * BSS / P2P clients have rssi above threshold.
+		 * We set the bt_kill_msk to BT_KILL_MSK_REDUCED_TXPOW before
+		 * the iteration, if one interface's rssi isn't good enough,
+		 * bt_kill_msk will be set to default values.
+		 */
+	} else if (ave_rssi < BT_DISABLE_REDUCED_TXPOWER_THRESHOLD) {
+		if (iwl_mvm_bt_coex_reduced_txp(mvm, mvmvif->ap_sta_id, false))
+			IWL_ERR(mvm, "Couldn't send BT_CONFIG cmd\n");
+
+		/*
+		 * One interface hasn't rssi above threshold, bt_kill_msk must
+		 * be set to default values.
+		 */
+		data->reduced_tx_power = false;
+	}
+
+	/* Begin to monitor the RSSI: it may influence the reduced Tx power */
+	iwl_mvm_bt_coex_enable_rssi_event(mvm, vif, true, ave_rssi);
+}
+
+static void iwl_mvm_bt_coex_notif_handle(struct iwl_mvm *mvm)
+{
+	struct iwl_bt_iterator_data data = {
+		.mvm = mvm,
+		.notif = &mvm->last_bt_notif,
+		.reduced_tx_power = true,
+	};
+	struct iwl_bt_coex_ci_cmd cmd = {};
+	u8 ci_bw_idx;
+
+	rcu_read_lock();
+	ieee80211_iterate_active_interfaces_atomic(
+					mvm->hw, IEEE80211_IFACE_ITER_NORMAL,
+					iwl_mvm_bt_notif_iterator, &data);
+
+	if (data.primary) {
+		struct ieee80211_chanctx_conf *chan = data.primary;
+		if (WARN_ON(!chan->def.chan)) {
+			rcu_read_unlock();
+			return;
+		}
+
+		if (chan->def.width < NL80211_CHAN_WIDTH_40) {
+			ci_bw_idx = 0;
+			cmd.co_run_bw_primary = 0;
+		} else {
+			cmd.co_run_bw_primary = 1;
+			if (chan->def.center_freq1 >
+			    chan->def.chan->center_freq)
+				ci_bw_idx = 2;
+			else
+				ci_bw_idx = 1;
+		}
+
+		cmd.bt_primary_ci =
+			iwl_ci_mask[chan->def.chan->hw_value][ci_bw_idx];
+		cmd.primary_ch_phy_id = *((u16 *)data.primary->drv_priv);
+	}
+
+	if (data.secondary) {
+		struct ieee80211_chanctx_conf *chan = data.secondary;
+		if (WARN_ON(!data.secondary->def.chan)) {
+			rcu_read_unlock();
+			return;
+		}
+
+		if (chan->def.width < NL80211_CHAN_WIDTH_40) {
+			ci_bw_idx = 0;
+			cmd.co_run_bw_secondary = 0;
+		} else {
+			cmd.co_run_bw_secondary = 1;
+			if (chan->def.center_freq1 >
+			    chan->def.chan->center_freq)
+				ci_bw_idx = 2;
+			else
+				ci_bw_idx = 1;
+		}
+
+		cmd.bt_secondary_ci =
+			iwl_ci_mask[chan->def.chan->hw_value][ci_bw_idx];
+		cmd.secondary_ch_phy_id = *((u16 *)data.secondary->drv_priv);
+	}
+
+	rcu_read_unlock();
+
+	/* Don't spam the fw with the same command over and over */
+	if (memcmp(&cmd, &mvm->last_bt_ci_cmd, sizeof(cmd))) {
+		if (iwl_mvm_send_cmd_pdu(mvm, BT_COEX_CI, CMD_SYNC,
+					 sizeof(cmd), &cmd))
+			IWL_ERR(mvm, "Failed to send BT_CI cmd");
+		memcpy(&mvm->last_bt_ci_cmd, &cmd, sizeof(cmd));
+	}
+
+	/*
+	 * If there are no BSS / P2P client interfaces, reduced Tx Power is
+	 * irrelevant since it is based on the RSSI coming from the beacon.
+	 * Use BT_KILL_MSK_DEFAULT in that case.
+	 */
+	data.reduced_tx_power = data.reduced_tx_power && data.num_bss_ifaces;
+
+	if (iwl_mvm_bt_udpate_ctrl_kill_msk(mvm, data.reduced_tx_power))
+		IWL_ERR(mvm, "Failed to update the ctrl_kill_msk\n");
+}
+
+/* upon association, the fw will send in BT Coex notification */
+int iwl_mvm_rx_bt_coex_notif(struct iwl_mvm *mvm,
+			     struct iwl_rx_cmd_buffer *rxb,
+			     struct iwl_device_cmd *dev_cmd)
+{
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
+	struct iwl_bt_coex_profile_notif *notif = (void *)pkt->data;
+
+
+	IWL_DEBUG_COEX(mvm, "BT Coex Notification received\n");
+	IWL_DEBUG_COEX(mvm, "\tBT status: %s\n",
+		       notif->bt_status ? "ON" : "OFF");
+	IWL_DEBUG_COEX(mvm, "\tBT open conn %d\n", notif->bt_open_conn);
+	IWL_DEBUG_COEX(mvm, "\tBT ci compliance %d\n", notif->bt_ci_compliance);
+	IWL_DEBUG_COEX(mvm, "\tBT primary_ch_lut %d\n",
+		       le32_to_cpu(notif->primary_ch_lut));
+	IWL_DEBUG_COEX(mvm, "\tBT secondary_ch_lut %d\n",
+		       le32_to_cpu(notif->secondary_ch_lut));
+	IWL_DEBUG_COEX(mvm, "\tBT activity grading %d\n",
+		       le32_to_cpu(notif->bt_activity_grading));
+	IWL_DEBUG_COEX(mvm, "\tBT agg traffic load %d\n",
+		       notif->bt_agg_traffic_load);
+
+	/* remember this notification for future use: rssi fluctuations */
+	memcpy(&mvm->last_bt_notif, notif, sizeof(mvm->last_bt_notif));
+
+	iwl_mvm_bt_coex_notif_handle(mvm);
+
+	/*
+	 * This is an async handler for a notification, returning anything other
+	 * than 0 doesn't make sense even if HCMD failed.
+	 */
+	return 0;
+}
+
+static void iwl_mvm_bt_rssi_iterator(void *_data, u8 *mac,
+				   struct ieee80211_vif *vif)
+{
+	struct iwl_mvm_vif *mvmvif = (void *)vif->drv_priv;
+	struct iwl_bt_iterator_data *data = _data;
+	struct iwl_mvm *mvm = data->mvm;
+
+	struct ieee80211_sta *sta;
+	struct iwl_mvm_sta *mvmsta;
+
+	struct ieee80211_chanctx_conf *chanctx_conf;
+
+	rcu_read_lock();
+	chanctx_conf = rcu_dereference(vif->chanctx_conf);
+	/* If channel context is invalid or not on 2.4GHz - don't count it */
+	if (!chanctx_conf ||
+	    chanctx_conf->def.chan->band != IEEE80211_BAND_2GHZ) {
+		rcu_read_unlock();
+		return;
+	}
+	rcu_read_unlock();
+
+	if (vif->type != NL80211_IFTYPE_STATION ||
+	    mvmvif->ap_sta_id == IWL_MVM_STATION_COUNT)
+		return;
+
+	sta = rcu_dereference_protected(mvm->fw_id_to_mac_id[mvmvif->ap_sta_id],
+					lockdep_is_held(&mvm->mutex));
+
+	/* This can happen if the station has been removed right now */
+	if (IS_ERR_OR_NULL(sta))
+		return;
+
+	mvmsta = iwl_mvm_sta_from_mac80211(sta);
+
+	data->num_bss_ifaces++;
+
+	/*
+	 * This interface doesn't support reduced Tx power (because of low
+	 * RSSI probably), then set bt_kill_msk to default values.
+	 */
+	if (!mvmsta->bt_reduced_txpower)
+		data->reduced_tx_power = false;
+	/* else - possibly leave it to BT_KILL_MSK_REDUCED_TXPOW */
+}
+
+void iwl_mvm_bt_rssi_event(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
+			   enum ieee80211_rssi_event rssi_event)
+{
+	struct iwl_mvm_vif *mvmvif = (void *)vif->drv_priv;
+	struct iwl_bt_iterator_data data = {
+		.mvm = mvm,
+		.reduced_tx_power = true,
+	};
+	int ret;
+
+	lockdep_assert_held(&mvm->mutex);
+
+	/* Rssi update while not associated ?! */
+	if (WARN_ON_ONCE(mvmvif->ap_sta_id == IWL_MVM_STATION_COUNT))
+		return;
+
+	/* No BT - reports should be disabled */
+	if (!mvm->last_bt_notif.bt_status)
+		return;
+
+	IWL_DEBUG_COEX(mvm, "RSSI for %pM is now %s\n", vif->bss_conf.bssid,
+		       rssi_event == RSSI_EVENT_HIGH ? "HIGH" : "LOW");
+
+	/*
+	 * Check if rssi is good enough for reduced Tx power, but not in loose
+	 * scheme.
+	 */
+	if (rssi_event == RSSI_EVENT_LOW || mvm->cfg->bt_shared_single_ant ||
+	    iwl_get_coex_type(mvm, vif) == BT_COEX_LOOSE_LUT)
+		ret = iwl_mvm_bt_coex_reduced_txp(mvm, mvmvif->ap_sta_id,
+						  false);
+	else
+		ret = iwl_mvm_bt_coex_reduced_txp(mvm, mvmvif->ap_sta_id, true);
+
+	if (ret)
+		IWL_ERR(mvm, "couldn't send BT_CONFIG HCMD upon RSSI event\n");
+
+	ieee80211_iterate_active_interfaces_atomic(
+		mvm->hw, IEEE80211_IFACE_ITER_NORMAL,
+		iwl_mvm_bt_rssi_iterator, &data);
+
+	/*
+	 * If there are no BSS / P2P client interfaces, reduced Tx Power is
+	 * irrelevant since it is based on the RSSI coming from the beacon.
+	 * Use BT_KILL_MSK_DEFAULT in that case.
+	 */
+	data.reduced_tx_power = data.reduced_tx_power && data.num_bss_ifaces;
+
+	if (iwl_mvm_bt_udpate_ctrl_kill_msk(mvm, data.reduced_tx_power))
+		IWL_ERR(mvm, "Failed to update the ctrl_kill_msk\n");
+}
+
+#define LINK_QUAL_AGG_TIME_LIMIT_DEF	(4000)
+#define LINK_QUAL_AGG_TIME_LIMIT_BT_ACT	(1200)
+
+u16 iwl_mvm_coex_agg_time_limit(struct iwl_mvm *mvm,
+				struct ieee80211_sta *sta)
+{
+	struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta);
+	enum iwl_bt_coex_lut_type lut_type;
+
+	if (le32_to_cpu(mvm->last_bt_notif.bt_activity_grading) <
+	    BT_HIGH_TRAFFIC)
+		return LINK_QUAL_AGG_TIME_LIMIT_DEF;
+
+	lut_type = iwl_get_coex_type(mvm, mvmsta->vif);
+
+	if (lut_type == BT_COEX_LOOSE_LUT)
+		return LINK_QUAL_AGG_TIME_LIMIT_DEF;
+
+	/* tight coex, high bt traffic, reduce AGG time limit */
+	return LINK_QUAL_AGG_TIME_LIMIT_BT_ACT;
+}
+
+bool iwl_mvm_bt_coex_is_mimo_allowed(struct iwl_mvm *mvm,
+				     struct ieee80211_sta *sta)
+{
+	struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta);
+
+	if (le32_to_cpu(mvm->last_bt_notif.bt_activity_grading) <
+	    BT_HIGH_TRAFFIC)
+		return true;
+
+	/*
+	 * In Tight, BT can't Rx while we Tx, so use both antennas since BT is
+	 * already killed.
+	 * In Loose, BT can Rx while we Tx, so forbid MIMO to let BT Rx while we
+	 * Tx.
+	 */
+	return iwl_get_coex_type(mvm, mvmsta->vif) == BT_COEX_TIGHT_LUT;
+}
+
+void iwl_mvm_bt_coex_vif_change(struct iwl_mvm *mvm)
+{
+	if (!(mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_NEWBT_COEX))
+		return;
+
+	iwl_mvm_bt_coex_notif_handle(mvm);
+}
+
+int iwl_mvm_rx_ant_coupling_notif(struct iwl_mvm *mvm,
+				  struct iwl_rx_cmd_buffer *rxb,
+				  struct iwl_device_cmd *dev_cmd)
+{
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
+	u32 ant_isolation = le32_to_cpup((void *)pkt->data);
+	u8 __maybe_unused lower_bound, upper_bound;
+	u8 lut;
+
+	struct iwl_bt_coex_cmd *bt_cmd;
+	struct iwl_host_cmd cmd = {
+		.id = BT_CONFIG,
+		.len = { sizeof(*bt_cmd), },
+		.dataflags = { IWL_HCMD_DFL_NOCOPY, },
+		.flags = CMD_SYNC,
+	};
+
+	if (!IWL_MVM_BT_COEX_CORUNNING)
+		return 0;
+
+	lockdep_assert_held(&mvm->mutex);
+
+	if (ant_isolation ==  mvm->last_ant_isol)
+		return 0;
+
+	for (lut = 0; lut < ARRAY_SIZE(antenna_coupling_ranges) - 1; lut++)
+		if (ant_isolation < antenna_coupling_ranges[lut + 1].range)
+			break;
+
+	lower_bound = antenna_coupling_ranges[lut].range;
+
+	if (lut < ARRAY_SIZE(antenna_coupling_ranges) - 1)
+		upper_bound = antenna_coupling_ranges[lut + 1].range;
+	else
+		upper_bound = antenna_coupling_ranges[lut].range;
+
+	IWL_DEBUG_COEX(mvm, "Antenna isolation=%d in range [%d,%d[, lut=%d\n",
+		       ant_isolation, lower_bound, upper_bound, lut);
+
+	mvm->last_ant_isol = ant_isolation;
+
+	if (mvm->last_corun_lut == lut)
+		return 0;
+
+	mvm->last_corun_lut = lut;
+
+	bt_cmd = kzalloc(sizeof(*bt_cmd), GFP_KERNEL);
+	if (!bt_cmd)
+		return 0;
+	cmd.data[0] = bt_cmd;
+
+	bt_cmd->flags = cpu_to_le32(BT_COEX_NW);
+	bt_cmd->valid_bit_msk |= cpu_to_le32(BT_VALID_ENABLE |
+					     BT_VALID_CORUN_LUT_20 |
+					     BT_VALID_CORUN_LUT_40);
+
+	/* For the moment, use the same LUT for 20GHz and 40GHz */
+	memcpy(bt_cmd->bt4_corun_lut20, antenna_coupling_ranges[lut].lut20,
+	       sizeof(bt_cmd->bt4_corun_lut20));
+
+	memcpy(bt_cmd->bt4_corun_lut40, antenna_coupling_ranges[lut].lut20,
+	       sizeof(bt_cmd->bt4_corun_lut40));
+
+	return 0;
+}
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-bt-coex.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-bt-coex.h
deleted file mode 100644
index 32156d7e2d07..000000000000
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api-bt-coex.h
+++ /dev/null
@@ -1,350 +0,0 @@
-/******************************************************************************
- *
- * This file is provided under a dual BSD/GPLv2 license.  When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2013 - 2014 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
- * USA
- *
- * The full GNU General Public License is included in this distribution
- * in the file called COPYING.
- *
- * Contact Information:
- *  Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- * BSD LICENSE
- *
- * Copyright(c) 2013 - 2014 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- *  * Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- *  * Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *  * Neither the name Intel Corporation nor the names of its
- *    contributors may be used to endorse or promote products derived
- *    from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *****************************************************************************/
-
-#ifndef __fw_api_bt_coex_h__
-#define __fw_api_bt_coex_h__
-
-#include <linux/types.h>
-#include <linux/bitops.h>
-
-#define BITS(nb) (BIT(nb) - 1)
-
-/**
- * enum iwl_bt_coex_flags - flags for BT_COEX command
- * @BT_COEX_MODE_POS:
- * @BT_COEX_MODE_MSK:
- * @BT_COEX_DISABLE:
- * @BT_COEX_2W:
- * @BT_COEX_3W:
- * @BT_COEX_NW:
- * @BT_COEX_SYNC2SCO:
- * @BT_COEX_CORUNNING:
- *
- * The COEX_MODE must be set for each command. Even if it is not changed.
- */
-enum iwl_bt_coex_flags {
-	BT_COEX_MODE_POS		= 3,
-	BT_COEX_MODE_MSK		= BITS(3) << BT_COEX_MODE_POS,
-	BT_COEX_DISABLE			= 0x0 << BT_COEX_MODE_POS,
-	BT_COEX_2W			= 0x1 << BT_COEX_MODE_POS,
-	BT_COEX_3W			= 0x2 << BT_COEX_MODE_POS,
-	BT_COEX_NW			= 0x3 << BT_COEX_MODE_POS,
-	BT_COEX_SYNC2SCO		= BIT(7),
-	BT_COEX_CORUNNING		= BIT(8),
-};
-
-/*
- * indicates what has changed in the BT_COEX command.
- * BT_VALID_ENABLE must be set for each command. Commands without this bit will
- * discarded by the firmware
- */
-enum iwl_bt_coex_valid_bit_msk {
-	BT_VALID_ENABLE			= BIT(0),
-	BT_VALID_BT_PRIO_BOOST		= BIT(1),
-	BT_VALID_MAX_KILL		= BIT(2),
-	BT_VALID_3W_TMRS		= BIT(3),
-	BT_VALID_KILL_ACK		= BIT(4),
-	BT_VALID_KILL_CTS		= BIT(5),
-	BT_VALID_REDUCED_TX_POWER	= BIT(6),
-	BT_VALID_LUT			= BIT(7),
-	BT_VALID_WIFI_RX_SW_PRIO_BOOST	= BIT(8),
-	BT_VALID_WIFI_TX_SW_PRIO_BOOST	= BIT(9),
-	BT_VALID_MULTI_PRIO_LUT		= BIT(10),
-	BT_VALID_TRM_KICK_FILTER	= BIT(11),
-	BT_VALID_CORUN_LUT_20		= BIT(12),
-	BT_VALID_CORUN_LUT_40		= BIT(13),
-	BT_VALID_ANT_ISOLATION		= BIT(14),
-	BT_VALID_ANT_ISOLATION_THRS	= BIT(15),
-	BT_VALID_TXTX_DELTA_FREQ_THRS	= BIT(16),
-	BT_VALID_TXRX_MAX_FREQ_0	= BIT(17),
-	BT_VALID_SYNC_TO_SCO		= BIT(18),
-};
-
-/**
- * enum iwl_bt_reduced_tx_power - allows to reduce txpower for WiFi frames.
- * @BT_REDUCED_TX_POWER_CTL: reduce Tx power for control frames
- * @BT_REDUCED_TX_POWER_DATA: reduce Tx power for data frames
- *
- * This mechanism allows to have BT and WiFi run concurrently. Since WiFi
- * reduces its Tx power, it can work along with BT, hence reducing the amount
- * of WiFi frames being killed by BT.
- */
-enum iwl_bt_reduced_tx_power {
-	BT_REDUCED_TX_POWER_CTL		= BIT(0),
-	BT_REDUCED_TX_POWER_DATA	= BIT(1),
-};
-
-enum iwl_bt_coex_lut_type {
-	BT_COEX_TIGHT_LUT = 0,
-	BT_COEX_LOOSE_LUT,
-	BT_COEX_TX_DIS_LUT,
-
-	BT_COEX_MAX_LUT,
-};
-
-#define BT_COEX_LUT_SIZE (12)
-#define BT_COEX_CORUN_LUT_SIZE (32)
-#define BT_COEX_MULTI_PRIO_LUT_SIZE (2)
-#define BT_COEX_BOOST_SIZE (4)
-#define BT_REDUCED_TX_POWER_BIT BIT(7)
-
-/**
- * struct iwl_bt_coex_cmd - bt coex configuration command
- * @flags:&enum iwl_bt_coex_flags
- * @max_kill:
- * @bt_reduced_tx_power: enum %iwl_bt_reduced_tx_power
- * @bt4_antenna_isolation:
- * @bt4_antenna_isolation_thr:
- * @bt4_tx_tx_delta_freq_thr:
- * @bt4_tx_rx_max_freq0:
- * @bt_prio_boost:
- * @wifi_tx_prio_boost: SW boost of wifi tx priority
- * @wifi_rx_prio_boost: SW boost of wifi rx priority
- * @kill_ack_msk:
- * @kill_cts_msk:
- * @decision_lut:
- * @bt4_multiprio_lut:
- * @bt4_corun_lut20:
- * @bt4_corun_lut40:
- * @valid_bit_msk: enum %iwl_bt_coex_valid_bit_msk
- *
- * The structure is used for the BT_COEX command.
- */
-struct iwl_bt_coex_cmd {
-	__le32 flags;
-	u8 max_kill;
-	u8 bt_reduced_tx_power;
-	u8 reserved[2];
-
-	u8 bt4_antenna_isolation;
-	u8 bt4_antenna_isolation_thr;
-	u8 bt4_tx_tx_delta_freq_thr;
-	u8 bt4_tx_rx_max_freq0;
-
-	__le32 bt_prio_boost[BT_COEX_BOOST_SIZE];
-	__le32 wifi_tx_prio_boost;
-	__le32 wifi_rx_prio_boost;
-	__le32 kill_ack_msk;
-	__le32 kill_cts_msk;
-
-	__le32 decision_lut[BT_COEX_MAX_LUT][BT_COEX_LUT_SIZE];
-	__le32 bt4_multiprio_lut[BT_COEX_MULTI_PRIO_LUT_SIZE];
-	__le32 bt4_corun_lut20[BT_COEX_CORUN_LUT_SIZE];
-	__le32 bt4_corun_lut40[BT_COEX_CORUN_LUT_SIZE];
-
-	__le32 valid_bit_msk;
-} __packed; /* BT_COEX_CMD_API_S_VER_3 */
-
-/**
- * struct iwl_bt_coex_ci_cmd - bt coex channel inhibition command
- * @bt_primary_ci:
- * @bt_secondary_ci:
- * @co_run_bw_primary:
- * @co_run_bw_secondary:
- * @primary_ch_phy_id:
- * @secondary_ch_phy_id:
- *
- * Used for BT_COEX_CI command
- */
-struct iwl_bt_coex_ci_cmd {
-	__le64 bt_primary_ci;
-	__le64 bt_secondary_ci;
-
-	u8 co_run_bw_primary;
-	u8 co_run_bw_secondary;
-	u8 primary_ch_phy_id;
-	u8 secondary_ch_phy_id;
-} __packed; /* BT_CI_MSG_API_S_VER_1 */
-
-#define BT_MBOX(n_dw, _msg, _pos, _nbits)	\
-	BT_MBOX##n_dw##_##_msg##_POS = (_pos),	\
-	BT_MBOX##n_dw##_##_msg = BITS(_nbits) << BT_MBOX##n_dw##_##_msg##_POS
-
-enum iwl_bt_mxbox_dw0 {
-	BT_MBOX(0, LE_SLAVE_LAT, 0, 3),
-	BT_MBOX(0, LE_PROF1, 3, 1),
-	BT_MBOX(0, LE_PROF2, 4, 1),
-	BT_MBOX(0, LE_PROF_OTHER, 5, 1),
-	BT_MBOX(0, CHL_SEQ_N, 8, 4),
-	BT_MBOX(0, INBAND_S, 13, 1),
-	BT_MBOX(0, LE_MIN_RSSI, 16, 4),
-	BT_MBOX(0, LE_SCAN, 20, 1),
-	BT_MBOX(0, LE_ADV, 21, 1),
-	BT_MBOX(0, LE_MAX_TX_POWER, 24, 4),
-	BT_MBOX(0, OPEN_CON_1, 28, 2),
-};
-
-enum iwl_bt_mxbox_dw1 {
-	BT_MBOX(1, BR_MAX_TX_POWER, 0, 4),
-	BT_MBOX(1, IP_SR, 4, 1),
-	BT_MBOX(1, LE_MSTR, 5, 1),
-	BT_MBOX(1, AGGR_TRFC_LD, 8, 6),
-	BT_MBOX(1, MSG_TYPE, 16, 3),
-	BT_MBOX(1, SSN, 19, 2),
-};
-
-enum iwl_bt_mxbox_dw2 {
-	BT_MBOX(2, SNIFF_ACT, 0, 3),
-	BT_MBOX(2, PAG, 3, 1),
-	BT_MBOX(2, INQUIRY, 4, 1),
-	BT_MBOX(2, CONN, 5, 1),
-	BT_MBOX(2, SNIFF_INTERVAL, 8, 5),
-	BT_MBOX(2, DISC, 13, 1),
-	BT_MBOX(2, SCO_TX_ACT, 16, 2),
-	BT_MBOX(2, SCO_RX_ACT, 18, 2),
-	BT_MBOX(2, ESCO_RE_TX, 20, 2),
-	BT_MBOX(2, SCO_DURATION, 24, 6),
-};
-
-enum iwl_bt_mxbox_dw3 {
-	BT_MBOX(3, SCO_STATE, 0, 1),
-	BT_MBOX(3, SNIFF_STATE, 1, 1),
-	BT_MBOX(3, A2DP_STATE, 2, 1),
-	BT_MBOX(3, ACL_STATE, 3, 1),
-	BT_MBOX(3, MSTR_STATE, 4, 1),
-	BT_MBOX(3, OBX_STATE, 5, 1),
-	BT_MBOX(3, OPEN_CON_2, 8, 2),
-	BT_MBOX(3, TRAFFIC_LOAD, 10, 2),
-	BT_MBOX(3, CHL_SEQN_LSB, 12, 1),
-	BT_MBOX(3, INBAND_P, 13, 1),
-	BT_MBOX(3, MSG_TYPE_2, 16, 3),
-	BT_MBOX(3, SSN_2, 19, 2),
-	BT_MBOX(3, UPDATE_REQUEST, 21, 1),
-};
-
-#define BT_MBOX_MSG(_notif, _num, _field)				     \
-	((le32_to_cpu((_notif)->mbox_msg[(_num)]) & BT_MBOX##_num##_##_field)\
-	>> BT_MBOX##_num##_##_field##_POS)
-
-enum iwl_bt_activity_grading {
-	BT_OFF			= 0,
-	BT_ON_NO_CONNECTION	= 1,
-	BT_LOW_TRAFFIC		= 2,
-	BT_HIGH_TRAFFIC		= 3,
-};
-
-/**
- * struct iwl_bt_coex_profile_notif - notification about BT coex
- * @mbox_msg: message from BT to WiFi
- * @msg_idx: the index of the message
- * @bt_status: 0 - off, 1 - on
- * @bt_open_conn: number of BT connections open
- * @bt_traffic_load: load of BT traffic
- * @bt_agg_traffic_load: aggregated load of BT traffic
- * @bt_ci_compliance: 0 - no CI compliance, 1 - CI compliant
- * @primary_ch_lut: LUT used for primary channel
- * @secondary_ch_lut: LUT used for secondary channel
- * @bt_activity_grading: the activity of BT enum %iwl_bt_activity_grading
- */
-struct iwl_bt_coex_profile_notif {
-	__le32 mbox_msg[4];
-	__le32 msg_idx;
-	u8 bt_status;
-	u8 bt_open_conn;
-	u8 bt_traffic_load;
-	u8 bt_agg_traffic_load;
-	u8 bt_ci_compliance;
-	u8 reserved[3];
-
-	__le32 primary_ch_lut;
-	__le32 secondary_ch_lut;
-	__le32 bt_activity_grading;
-} __packed; /* BT_COEX_PROFILE_NTFY_API_S_VER_2 */
-
-enum iwl_bt_coex_prio_table_event {
-	BT_COEX_PRIO_TBL_EVT_INIT_CALIB1		= 0,
-	BT_COEX_PRIO_TBL_EVT_INIT_CALIB2		= 1,
-	BT_COEX_PRIO_TBL_EVT_PERIODIC_CALIB_LOW1	= 2,
-	BT_COEX_PRIO_TBL_EVT_PERIODIC_CALIB_LOW2	= 3,
-	BT_COEX_PRIO_TBL_EVT_PERIODIC_CALIB_HIGH1	= 4,
-	BT_COEX_PRIO_TBL_EVT_PERIODIC_CALIB_HIGH2	= 5,
-	BT_COEX_PRIO_TBL_EVT_DTIM			= 6,
-	BT_COEX_PRIO_TBL_EVT_SCAN52			= 7,
-	BT_COEX_PRIO_TBL_EVT_SCAN24			= 8,
-	BT_COEX_PRIO_TBL_EVT_IDLE			= 9,
-	BT_COEX_PRIO_TBL_EVT_MAX			= 16,
-}; /* BT_COEX_PRIO_TABLE_EVENTS_API_E_VER_1 */
-
-enum iwl_bt_coex_prio_table_prio {
-	BT_COEX_PRIO_TBL_DISABLED	= 0,
-	BT_COEX_PRIO_TBL_PRIO_LOW	= 1,
-	BT_COEX_PRIO_TBL_PRIO_HIGH	= 2,
-	BT_COEX_PRIO_TBL_PRIO_BYPASS	= 3,
-	BT_COEX_PRIO_TBL_PRIO_COEX_OFF	= 4,
-	BT_COEX_PRIO_TBL_PRIO_COEX_ON	= 5,
-	BT_COEX_PRIO_TBL_PRIO_COEX_IDLE = 6,
-	BT_COEX_PRIO_TBL_MAX		= 8,
-}; /* BT_COEX_PRIO_TABLE_PRIORITIES_API_E_VER_1 */
-
-#define BT_COEX_PRIO_TBL_SHRD_ANT_POS     (0)
-#define BT_COEX_PRIO_TBL_PRIO_POS         (1)
-#define BT_COEX_PRIO_TBL_RESERVED_POS     (4)
-
-/**
- * struct iwl_bt_coex_prio_tbl_cmd - priority table for BT coex
- * @prio_tbl:
- */
-struct iwl_bt_coex_prio_tbl_cmd {
-	u8 prio_tbl[BT_COEX_PRIO_TBL_EVT_MAX];
-} __packed;
-
-#endif /* __fw_api_bt_coex_h__ */
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-coex.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-coex.h
new file mode 100644
index 000000000000..32156d7e2d07
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-coex.h
@@ -0,0 +1,350 @@
+/******************************************************************************
+ *
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2013 - 2014 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called COPYING.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2013 - 2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *  * Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  * Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  * Neither the name Intel Corporation nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *****************************************************************************/
+
+#ifndef __fw_api_bt_coex_h__
+#define __fw_api_bt_coex_h__
+
+#include <linux/types.h>
+#include <linux/bitops.h>
+
+#define BITS(nb) (BIT(nb) - 1)
+
+/**
+ * enum iwl_bt_coex_flags - flags for BT_COEX command
+ * @BT_COEX_MODE_POS:
+ * @BT_COEX_MODE_MSK:
+ * @BT_COEX_DISABLE:
+ * @BT_COEX_2W:
+ * @BT_COEX_3W:
+ * @BT_COEX_NW:
+ * @BT_COEX_SYNC2SCO:
+ * @BT_COEX_CORUNNING:
+ *
+ * The COEX_MODE must be set for each command. Even if it is not changed.
+ */
+enum iwl_bt_coex_flags {
+	BT_COEX_MODE_POS		= 3,
+	BT_COEX_MODE_MSK		= BITS(3) << BT_COEX_MODE_POS,
+	BT_COEX_DISABLE			= 0x0 << BT_COEX_MODE_POS,
+	BT_COEX_2W			= 0x1 << BT_COEX_MODE_POS,
+	BT_COEX_3W			= 0x2 << BT_COEX_MODE_POS,
+	BT_COEX_NW			= 0x3 << BT_COEX_MODE_POS,
+	BT_COEX_SYNC2SCO		= BIT(7),
+	BT_COEX_CORUNNING		= BIT(8),
+};
+
+/*
+ * indicates what has changed in the BT_COEX command.
+ * BT_VALID_ENABLE must be set for each command. Commands without this bit will
+ * discarded by the firmware
+ */
+enum iwl_bt_coex_valid_bit_msk {
+	BT_VALID_ENABLE			= BIT(0),
+	BT_VALID_BT_PRIO_BOOST		= BIT(1),
+	BT_VALID_MAX_KILL		= BIT(2),
+	BT_VALID_3W_TMRS		= BIT(3),
+	BT_VALID_KILL_ACK		= BIT(4),
+	BT_VALID_KILL_CTS		= BIT(5),
+	BT_VALID_REDUCED_TX_POWER	= BIT(6),
+	BT_VALID_LUT			= BIT(7),
+	BT_VALID_WIFI_RX_SW_PRIO_BOOST	= BIT(8),
+	BT_VALID_WIFI_TX_SW_PRIO_BOOST	= BIT(9),
+	BT_VALID_MULTI_PRIO_LUT		= BIT(10),
+	BT_VALID_TRM_KICK_FILTER	= BIT(11),
+	BT_VALID_CORUN_LUT_20		= BIT(12),
+	BT_VALID_CORUN_LUT_40		= BIT(13),
+	BT_VALID_ANT_ISOLATION		= BIT(14),
+	BT_VALID_ANT_ISOLATION_THRS	= BIT(15),
+	BT_VALID_TXTX_DELTA_FREQ_THRS	= BIT(16),
+	BT_VALID_TXRX_MAX_FREQ_0	= BIT(17),
+	BT_VALID_SYNC_TO_SCO		= BIT(18),
+};
+
+/**
+ * enum iwl_bt_reduced_tx_power - allows to reduce txpower for WiFi frames.
+ * @BT_REDUCED_TX_POWER_CTL: reduce Tx power for control frames
+ * @BT_REDUCED_TX_POWER_DATA: reduce Tx power for data frames
+ *
+ * This mechanism allows to have BT and WiFi run concurrently. Since WiFi
+ * reduces its Tx power, it can work along with BT, hence reducing the amount
+ * of WiFi frames being killed by BT.
+ */
+enum iwl_bt_reduced_tx_power {
+	BT_REDUCED_TX_POWER_CTL		= BIT(0),
+	BT_REDUCED_TX_POWER_DATA	= BIT(1),
+};
+
+enum iwl_bt_coex_lut_type {
+	BT_COEX_TIGHT_LUT = 0,
+	BT_COEX_LOOSE_LUT,
+	BT_COEX_TX_DIS_LUT,
+
+	BT_COEX_MAX_LUT,
+};
+
+#define BT_COEX_LUT_SIZE (12)
+#define BT_COEX_CORUN_LUT_SIZE (32)
+#define BT_COEX_MULTI_PRIO_LUT_SIZE (2)
+#define BT_COEX_BOOST_SIZE (4)
+#define BT_REDUCED_TX_POWER_BIT BIT(7)
+
+/**
+ * struct iwl_bt_coex_cmd - bt coex configuration command
+ * @flags:&enum iwl_bt_coex_flags
+ * @max_kill:
+ * @bt_reduced_tx_power: enum %iwl_bt_reduced_tx_power
+ * @bt4_antenna_isolation:
+ * @bt4_antenna_isolation_thr:
+ * @bt4_tx_tx_delta_freq_thr:
+ * @bt4_tx_rx_max_freq0:
+ * @bt_prio_boost:
+ * @wifi_tx_prio_boost: SW boost of wifi tx priority
+ * @wifi_rx_prio_boost: SW boost of wifi rx priority
+ * @kill_ack_msk:
+ * @kill_cts_msk:
+ * @decision_lut:
+ * @bt4_multiprio_lut:
+ * @bt4_corun_lut20:
+ * @bt4_corun_lut40:
+ * @valid_bit_msk: enum %iwl_bt_coex_valid_bit_msk
+ *
+ * The structure is used for the BT_COEX command.
+ */
+struct iwl_bt_coex_cmd {
+	__le32 flags;
+	u8 max_kill;
+	u8 bt_reduced_tx_power;
+	u8 reserved[2];
+
+	u8 bt4_antenna_isolation;
+	u8 bt4_antenna_isolation_thr;
+	u8 bt4_tx_tx_delta_freq_thr;
+	u8 bt4_tx_rx_max_freq0;
+
+	__le32 bt_prio_boost[BT_COEX_BOOST_SIZE];
+	__le32 wifi_tx_prio_boost;
+	__le32 wifi_rx_prio_boost;
+	__le32 kill_ack_msk;
+	__le32 kill_cts_msk;
+
+	__le32 decision_lut[BT_COEX_MAX_LUT][BT_COEX_LUT_SIZE];
+	__le32 bt4_multiprio_lut[BT_COEX_MULTI_PRIO_LUT_SIZE];
+	__le32 bt4_corun_lut20[BT_COEX_CORUN_LUT_SIZE];
+	__le32 bt4_corun_lut40[BT_COEX_CORUN_LUT_SIZE];
+
+	__le32 valid_bit_msk;
+} __packed; /* BT_COEX_CMD_API_S_VER_3 */
+
+/**
+ * struct iwl_bt_coex_ci_cmd - bt coex channel inhibition command
+ * @bt_primary_ci:
+ * @bt_secondary_ci:
+ * @co_run_bw_primary:
+ * @co_run_bw_secondary:
+ * @primary_ch_phy_id:
+ * @secondary_ch_phy_id:
+ *
+ * Used for BT_COEX_CI command
+ */
+struct iwl_bt_coex_ci_cmd {
+	__le64 bt_primary_ci;
+	__le64 bt_secondary_ci;
+
+	u8 co_run_bw_primary;
+	u8 co_run_bw_secondary;
+	u8 primary_ch_phy_id;
+	u8 secondary_ch_phy_id;
+} __packed; /* BT_CI_MSG_API_S_VER_1 */
+
+#define BT_MBOX(n_dw, _msg, _pos, _nbits)	\
+	BT_MBOX##n_dw##_##_msg##_POS = (_pos),	\
+	BT_MBOX##n_dw##_##_msg = BITS(_nbits) << BT_MBOX##n_dw##_##_msg##_POS
+
+enum iwl_bt_mxbox_dw0 {
+	BT_MBOX(0, LE_SLAVE_LAT, 0, 3),
+	BT_MBOX(0, LE_PROF1, 3, 1),
+	BT_MBOX(0, LE_PROF2, 4, 1),
+	BT_MBOX(0, LE_PROF_OTHER, 5, 1),
+	BT_MBOX(0, CHL_SEQ_N, 8, 4),
+	BT_MBOX(0, INBAND_S, 13, 1),
+	BT_MBOX(0, LE_MIN_RSSI, 16, 4),
+	BT_MBOX(0, LE_SCAN, 20, 1),
+	BT_MBOX(0, LE_ADV, 21, 1),
+	BT_MBOX(0, LE_MAX_TX_POWER, 24, 4),
+	BT_MBOX(0, OPEN_CON_1, 28, 2),
+};
+
+enum iwl_bt_mxbox_dw1 {
+	BT_MBOX(1, BR_MAX_TX_POWER, 0, 4),
+	BT_MBOX(1, IP_SR, 4, 1),
+	BT_MBOX(1, LE_MSTR, 5, 1),
+	BT_MBOX(1, AGGR_TRFC_LD, 8, 6),
+	BT_MBOX(1, MSG_TYPE, 16, 3),
+	BT_MBOX(1, SSN, 19, 2),
+};
+
+enum iwl_bt_mxbox_dw2 {
+	BT_MBOX(2, SNIFF_ACT, 0, 3),
+	BT_MBOX(2, PAG, 3, 1),
+	BT_MBOX(2, INQUIRY, 4, 1),
+	BT_MBOX(2, CONN, 5, 1),
+	BT_MBOX(2, SNIFF_INTERVAL, 8, 5),
+	BT_MBOX(2, DISC, 13, 1),
+	BT_MBOX(2, SCO_TX_ACT, 16, 2),
+	BT_MBOX(2, SCO_RX_ACT, 18, 2),
+	BT_MBOX(2, ESCO_RE_TX, 20, 2),
+	BT_MBOX(2, SCO_DURATION, 24, 6),
+};
+
+enum iwl_bt_mxbox_dw3 {
+	BT_MBOX(3, SCO_STATE, 0, 1),
+	BT_MBOX(3, SNIFF_STATE, 1, 1),
+	BT_MBOX(3, A2DP_STATE, 2, 1),
+	BT_MBOX(3, ACL_STATE, 3, 1),
+	BT_MBOX(3, MSTR_STATE, 4, 1),
+	BT_MBOX(3, OBX_STATE, 5, 1),
+	BT_MBOX(3, OPEN_CON_2, 8, 2),
+	BT_MBOX(3, TRAFFIC_LOAD, 10, 2),
+	BT_MBOX(3, CHL_SEQN_LSB, 12, 1),
+	BT_MBOX(3, INBAND_P, 13, 1),
+	BT_MBOX(3, MSG_TYPE_2, 16, 3),
+	BT_MBOX(3, SSN_2, 19, 2),
+	BT_MBOX(3, UPDATE_REQUEST, 21, 1),
+};
+
+#define BT_MBOX_MSG(_notif, _num, _field)				     \
+	((le32_to_cpu((_notif)->mbox_msg[(_num)]) & BT_MBOX##_num##_##_field)\
+	>> BT_MBOX##_num##_##_field##_POS)
+
+enum iwl_bt_activity_grading {
+	BT_OFF			= 0,
+	BT_ON_NO_CONNECTION	= 1,
+	BT_LOW_TRAFFIC		= 2,
+	BT_HIGH_TRAFFIC		= 3,
+};
+
+/**
+ * struct iwl_bt_coex_profile_notif - notification about BT coex
+ * @mbox_msg: message from BT to WiFi
+ * @msg_idx: the index of the message
+ * @bt_status: 0 - off, 1 - on
+ * @bt_open_conn: number of BT connections open
+ * @bt_traffic_load: load of BT traffic
+ * @bt_agg_traffic_load: aggregated load of BT traffic
+ * @bt_ci_compliance: 0 - no CI compliance, 1 - CI compliant
+ * @primary_ch_lut: LUT used for primary channel
+ * @secondary_ch_lut: LUT used for secondary channel
+ * @bt_activity_grading: the activity of BT enum %iwl_bt_activity_grading
+ */
+struct iwl_bt_coex_profile_notif {
+	__le32 mbox_msg[4];
+	__le32 msg_idx;
+	u8 bt_status;
+	u8 bt_open_conn;
+	u8 bt_traffic_load;
+	u8 bt_agg_traffic_load;
+	u8 bt_ci_compliance;
+	u8 reserved[3];
+
+	__le32 primary_ch_lut;
+	__le32 secondary_ch_lut;
+	__le32 bt_activity_grading;
+} __packed; /* BT_COEX_PROFILE_NTFY_API_S_VER_2 */
+
+enum iwl_bt_coex_prio_table_event {
+	BT_COEX_PRIO_TBL_EVT_INIT_CALIB1		= 0,
+	BT_COEX_PRIO_TBL_EVT_INIT_CALIB2		= 1,
+	BT_COEX_PRIO_TBL_EVT_PERIODIC_CALIB_LOW1	= 2,
+	BT_COEX_PRIO_TBL_EVT_PERIODIC_CALIB_LOW2	= 3,
+	BT_COEX_PRIO_TBL_EVT_PERIODIC_CALIB_HIGH1	= 4,
+	BT_COEX_PRIO_TBL_EVT_PERIODIC_CALIB_HIGH2	= 5,
+	BT_COEX_PRIO_TBL_EVT_DTIM			= 6,
+	BT_COEX_PRIO_TBL_EVT_SCAN52			= 7,
+	BT_COEX_PRIO_TBL_EVT_SCAN24			= 8,
+	BT_COEX_PRIO_TBL_EVT_IDLE			= 9,
+	BT_COEX_PRIO_TBL_EVT_MAX			= 16,
+}; /* BT_COEX_PRIO_TABLE_EVENTS_API_E_VER_1 */
+
+enum iwl_bt_coex_prio_table_prio {
+	BT_COEX_PRIO_TBL_DISABLED	= 0,
+	BT_COEX_PRIO_TBL_PRIO_LOW	= 1,
+	BT_COEX_PRIO_TBL_PRIO_HIGH	= 2,
+	BT_COEX_PRIO_TBL_PRIO_BYPASS	= 3,
+	BT_COEX_PRIO_TBL_PRIO_COEX_OFF	= 4,
+	BT_COEX_PRIO_TBL_PRIO_COEX_ON	= 5,
+	BT_COEX_PRIO_TBL_PRIO_COEX_IDLE = 6,
+	BT_COEX_PRIO_TBL_MAX		= 8,
+}; /* BT_COEX_PRIO_TABLE_PRIORITIES_API_E_VER_1 */
+
+#define BT_COEX_PRIO_TBL_SHRD_ANT_POS     (0)
+#define BT_COEX_PRIO_TBL_PRIO_POS         (1)
+#define BT_COEX_PRIO_TBL_RESERVED_POS     (4)
+
+/**
+ * struct iwl_bt_coex_prio_tbl_cmd - priority table for BT coex
+ * @prio_tbl:
+ */
+struct iwl_bt_coex_prio_tbl_cmd {
+	u8 prio_tbl[BT_COEX_PRIO_TBL_EVT_MAX];
+} __packed;
+
+#endif /* __fw_api_bt_coex_h__ */
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/iwlwifi/mvm/fw-api.h
index 703168b7f63e..6e75b52588de 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api.h
@@ -70,7 +70,7 @@
 #include "fw-api-mac.h"
 #include "fw-api-power.h"
 #include "fw-api-d3.h"
-#include "fw-api-bt-coex.h"
+#include "fw-api-coex.h"
 
 /* maximal number of Tx queues in any platform */
 #define IWL_MVM_MAX_QUEUES	20
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index 18939dc06faf..4c386541fe35 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -908,8 +908,8 @@ int iwl_mvm_rx_bt_coex_notif(struct iwl_mvm *mvm,
 void iwl_mvm_bt_rssi_event(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
 			   enum ieee80211_rssi_event rssi_event);
 void iwl_mvm_bt_coex_vif_change(struct iwl_mvm *mvm);
-u16 iwl_mvm_bt_coex_agg_time_limit(struct iwl_mvm *mvm,
-				   struct ieee80211_sta *sta);
+u16 iwl_mvm_coex_agg_time_limit(struct iwl_mvm *mvm,
+				struct ieee80211_sta *sta);
 bool iwl_mvm_bt_coex_is_mimo_allowed(struct iwl_mvm *mvm,
 				     struct ieee80211_sta *sta);
 int iwl_mvm_bt_coex_reduced_txp(struct iwl_mvm *mvm, u8 sta_id, bool enable);
diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.c b/drivers/net/wireless/iwlwifi/mvm/rs.c
index 399709f2be2e..ad8334239106 100644
--- a/drivers/net/wireless/iwlwifi/mvm/rs.c
+++ b/drivers/net/wireless/iwlwifi/mvm/rs.c
@@ -2591,7 +2591,7 @@ static void rs_fill_lq_cmd(struct iwl_mvm *mvm,
 
 	if (sta)
 		lq_cmd->agg_time_limit =
-			cpu_to_le16(iwl_mvm_bt_coex_agg_time_limit(mvm, sta));
+			cpu_to_le16(iwl_mvm_coex_agg_time_limit(mvm, sta));
 }
 
 static void *rs_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir)
-- 
cgit v1.2.2


From ee7bea582e9d4b7de5928628201a5763e0e4cbbe Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Thu, 6 Mar 2014 10:30:49 +0200
Subject: iwlwifi: mvm: BT Coex - classify packet priority in BT code

This code is really related to BT Coex - move it to the coex
file.
Also - prepare for a FW API change that will happen soon:
Bits 11 and 12 will be allocated for BT priority. Today, we
only have bit 12.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/coex.c      | 17 +++++++++++++++++
 drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h |  3 +++
 drivers/net/wireless/iwlwifi/mvm/mvm.h       |  2 ++
 drivers/net/wireless/iwlwifi/mvm/tx.c        |  8 ++------
 4 files changed, 24 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/coex.c b/drivers/net/wireless/iwlwifi/mvm/coex.c
index 0b2e351d4e52..43027c346ad3 100644
--- a/drivers/net/wireless/iwlwifi/mvm/coex.c
+++ b/drivers/net/wireless/iwlwifi/mvm/coex.c
@@ -61,6 +61,8 @@
  *
  *****************************************************************************/
 
+#include <linux/ieee80211.h>
+#include <linux/etherdevice.h>
 #include <net/mac80211.h>
 
 #include "fw-api-coex.h"
@@ -1205,6 +1207,21 @@ bool iwl_mvm_bt_coex_is_mimo_allowed(struct iwl_mvm *mvm,
 	return iwl_get_coex_type(mvm, mvmsta->vif) == BT_COEX_TIGHT_LUT;
 }
 
+u8 iwl_mvm_bt_coex_tx_prio(struct iwl_mvm *mvm, struct ieee80211_hdr *hdr,
+			   struct ieee80211_tx_info *info)
+{
+	__le16 fc = hdr->frame_control;
+
+	/* High prio packet (wrt. BT coex) if it is EAPOL, MCAST or MGMT */
+	if (info->band == IEEE80211_BAND_2GHZ &&
+	    (info->control.flags & IEEE80211_TX_CTRL_PORT_CTRL_PROTO ||
+	     is_multicast_ether_addr(hdr->addr1) ||
+	     ieee80211_is_back_req(fc) || ieee80211_is_mgmt(fc)))
+		return 2;
+
+	return 0;
+}
+
 void iwl_mvm_bt_coex_vif_change(struct iwl_mvm *mvm)
 {
 	if (!(mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_NEWBT_COEX))
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
index b674c2a2b51c..8e122f3a7a74 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
@@ -76,6 +76,8 @@
  * @TX_CMD_FLG_VHT_NDPA: mark frame is NDPA for VHT beamformer sequence
  * @TX_CMD_FLG_HT_NDPA: mark frame is NDPA for HT beamformer sequence
  * @TX_CMD_FLG_CSI_FDBK2HOST: mark to send feedback to host (only if good CRC)
+ * @TX_CMD_FLG_BT_PRIO_POS: the position of the BT priority (bit 11 is ignored
+ *	on old firmwares).
  * @TX_CMD_FLG_BT_DIS: disable BT priority for this frame
  * @TX_CMD_FLG_SEQ_CTL: set if FW should override the sequence control.
  *	Should be set for mgmt, non-QOS data, mcast, bcast and in scan command
@@ -107,6 +109,7 @@ enum iwl_tx_flags {
 	TX_CMD_FLG_VHT_NDPA		= BIT(8),
 	TX_CMD_FLG_HT_NDPA		= BIT(9),
 	TX_CMD_FLG_CSI_FDBK2HOST	= BIT(10),
+	TX_CMD_FLG_BT_PRIO_POS		= 11,
 	TX_CMD_FLG_BT_DIS		= BIT(12),
 	TX_CMD_FLG_SEQ_CTL		= BIT(13),
 	TX_CMD_FLG_MORE_FRAG		= BIT(14),
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index 4c386541fe35..221a482a36ea 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -912,6 +912,8 @@ u16 iwl_mvm_coex_agg_time_limit(struct iwl_mvm *mvm,
 				struct ieee80211_sta *sta);
 bool iwl_mvm_bt_coex_is_mimo_allowed(struct iwl_mvm *mvm,
 				     struct ieee80211_sta *sta);
+u8 iwl_mvm_bt_coex_tx_prio(struct iwl_mvm *mvm, struct ieee80211_hdr *hdr,
+			   struct ieee80211_tx_info *info);
 int iwl_mvm_bt_coex_reduced_txp(struct iwl_mvm *mvm, u8 sta_id, bool enable);
 
 enum iwl_bt_kill_msk {
diff --git a/drivers/net/wireless/iwlwifi/mvm/tx.c b/drivers/net/wireless/iwlwifi/mvm/tx.c
index 6cdbf7b21714..dd813d463218 100644
--- a/drivers/net/wireless/iwlwifi/mvm/tx.c
+++ b/drivers/net/wireless/iwlwifi/mvm/tx.c
@@ -90,12 +90,8 @@ static void iwl_mvm_set_tx_cmd(struct iwl_mvm *mvm, struct sk_buff *skb,
 	else if (ieee80211_is_back_req(fc))
 		tx_flags |= TX_CMD_FLG_ACK | TX_CMD_FLG_BAR;
 
-	/* High prio packet (wrt. BT coex) if it is EAPOL, MCAST or MGMT */
-	if (info->band == IEEE80211_BAND_2GHZ &&
-	    (info->control.flags & IEEE80211_TX_CTRL_PORT_CTRL_PROTO ||
-	     is_multicast_ether_addr(hdr->addr1) ||
-	     ieee80211_is_back_req(fc) || ieee80211_is_mgmt(fc)))
-		tx_flags |= TX_CMD_FLG_BT_DIS;
+	tx_flags |= iwl_mvm_bt_coex_tx_prio(mvm, hdr, info) <<
+			TX_CMD_FLG_BT_PRIO_POS;
 
 	if (ieee80211_has_morefrags(fc))
 		tx_flags |= TX_CMD_FLG_MORE_FRAG;
-- 
cgit v1.2.2


From b797e3fbab399ed023bdaeaf7fb63236f67eaa1c Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Thu, 6 Mar 2014 14:49:36 +0200
Subject: iwlwifi: mvm: BT Coex - enable per-AC BT priority

We can now define the priority against BT per AC. This is
possible with a newer firmware that allows to define the
priority with 2 bits.
Note that this change is compatible with older firmware
since older firmware will simply ignore the new bit (11),
and we still set the old bit (12) in the same cases as
before.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/coex.c | 22 ++++++++++++++++++----
 drivers/net/wireless/iwlwifi/mvm/mvm.h  |  4 +++-
 drivers/net/wireless/iwlwifi/mvm/sta.c  |  2 +-
 drivers/net/wireless/iwlwifi/mvm/tx.c   |  9 ++++++---
 4 files changed, 28 insertions(+), 9 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/coex.c b/drivers/net/wireless/iwlwifi/mvm/coex.c
index 43027c346ad3..018d75c805ad 100644
--- a/drivers/net/wireless/iwlwifi/mvm/coex.c
+++ b/drivers/net/wireless/iwlwifi/mvm/coex.c
@@ -1208,16 +1208,30 @@ bool iwl_mvm_bt_coex_is_mimo_allowed(struct iwl_mvm *mvm,
 }
 
 u8 iwl_mvm_bt_coex_tx_prio(struct iwl_mvm *mvm, struct ieee80211_hdr *hdr,
-			   struct ieee80211_tx_info *info)
+			   struct ieee80211_tx_info *info, u8 ac)
 {
 	__le16 fc = hdr->frame_control;
 
+	if (info->band != IEEE80211_BAND_2GHZ)
+		return 0;
+
 	/* High prio packet (wrt. BT coex) if it is EAPOL, MCAST or MGMT */
-	if (info->band == IEEE80211_BAND_2GHZ &&
-	    (info->control.flags & IEEE80211_TX_CTRL_PORT_CTRL_PROTO ||
+	if (info->control.flags & IEEE80211_TX_CTRL_PORT_CTRL_PROTO ||
 	     is_multicast_ether_addr(hdr->addr1) ||
-	     ieee80211_is_back_req(fc) || ieee80211_is_mgmt(fc)))
+	     ieee80211_is_ctl(fc) || ieee80211_is_mgmt(fc) ||
+	     ieee80211_is_nullfunc(fc) || ieee80211_is_qos_nullfunc(fc))
+		return 3;
+
+	switch (ac) {
+	case IEEE80211_AC_BE:
+		return 1;
+	case IEEE80211_AC_VO:
+		return 3;
+	case IEEE80211_AC_VI:
 		return 2;
+	default:
+		break;
+	}
 
 	return 0;
 }
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index 221a482a36ea..f77be762ebd9 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -346,6 +346,8 @@ iwl_mvm_vif_from_mac80211(struct ieee80211_vif *vif)
 	return (void *)vif->drv_priv;
 }
 
+extern const u8 tid_to_mac80211_ac[];
+
 enum iwl_scan_status {
 	IWL_MVM_SCAN_NONE,
 	IWL_MVM_SCAN_OS,
@@ -913,7 +915,7 @@ u16 iwl_mvm_coex_agg_time_limit(struct iwl_mvm *mvm,
 bool iwl_mvm_bt_coex_is_mimo_allowed(struct iwl_mvm *mvm,
 				     struct ieee80211_sta *sta);
 u8 iwl_mvm_bt_coex_tx_prio(struct iwl_mvm *mvm, struct ieee80211_hdr *hdr,
-			   struct ieee80211_tx_info *info);
+			   struct ieee80211_tx_info *info, u8 ac);
 int iwl_mvm_bt_coex_reduced_txp(struct iwl_mvm *mvm, u8 sta_id, bool enable);
 
 enum iwl_bt_kill_msk {
diff --git a/drivers/net/wireless/iwlwifi/mvm/sta.c b/drivers/net/wireless/iwlwifi/mvm/sta.c
index 2677d1c0e1a1..67393535a5fb 100644
--- a/drivers/net/wireless/iwlwifi/mvm/sta.c
+++ b/drivers/net/wireless/iwlwifi/mvm/sta.c
@@ -851,7 +851,7 @@ static int iwl_mvm_sta_tx_agg(struct iwl_mvm *mvm, struct ieee80211_sta *sta,
 	return ret;
 }
 
-static const u8 tid_to_mac80211_ac[] = {
+const u8 tid_to_mac80211_ac[] = {
 	IEEE80211_AC_BE,
 	IEEE80211_AC_BK,
 	IEEE80211_AC_BK,
diff --git a/drivers/net/wireless/iwlwifi/mvm/tx.c b/drivers/net/wireless/iwlwifi/mvm/tx.c
index dd813d463218..0e3f45a8553e 100644
--- a/drivers/net/wireless/iwlwifi/mvm/tx.c
+++ b/drivers/net/wireless/iwlwifi/mvm/tx.c
@@ -79,6 +79,7 @@ static void iwl_mvm_set_tx_cmd(struct iwl_mvm *mvm, struct sk_buff *skb,
 	__le16 fc = hdr->frame_control;
 	u32 tx_flags = le32_to_cpu(tx_cmd->tx_flags);
 	u32 len = skb->len + FCS_LEN;
+	u8 ac;
 
 	if (!(info->flags & IEEE80211_TX_CTL_NO_ACK))
 		tx_flags |= TX_CMD_FLG_ACK;
@@ -90,9 +91,6 @@ static void iwl_mvm_set_tx_cmd(struct iwl_mvm *mvm, struct sk_buff *skb,
 	else if (ieee80211_is_back_req(fc))
 		tx_flags |= TX_CMD_FLG_ACK | TX_CMD_FLG_BAR;
 
-	tx_flags |= iwl_mvm_bt_coex_tx_prio(mvm, hdr, info) <<
-			TX_CMD_FLG_BT_PRIO_POS;
-
 	if (ieee80211_has_morefrags(fc))
 		tx_flags |= TX_CMD_FLG_MORE_FRAG;
 
@@ -108,6 +106,11 @@ static void iwl_mvm_set_tx_cmd(struct iwl_mvm *mvm, struct sk_buff *skb,
 			tx_flags &= ~TX_CMD_FLG_SEQ_CTL;
 	}
 
+	/* tid_tspec will default to 0 = BE when QOS isn't enabled */
+	ac = tid_to_mac80211_ac[tx_cmd->tid_tspec];
+	tx_flags |= iwl_mvm_bt_coex_tx_prio(mvm, hdr, info, ac) <<
+			TX_CMD_FLG_BT_PRIO_POS;
+
 	if (ieee80211_is_mgmt(fc)) {
 		if (ieee80211_is_assoc_req(fc) || ieee80211_is_reassoc_req(fc))
 			tx_cmd->pm_frame_timeout = cpu_to_le16(3);
-- 
cgit v1.2.2


From a19a7ec8fc8eb32113efeaff2a1ceca273726e9b Mon Sep 17 00:00:00 2001
From: stephen hemminger <stephen@networkplumber.org>
Date: Mon, 10 Mar 2014 09:48:38 -0700
Subject: bonding: force cast of IP address in options

The option code is taking IP address and putting it into a generic
container. Force cast to silence sparse warnings.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_netlink.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_netlink.c b/drivers/net/bonding/bond_netlink.c
index 20659b114f24..f847e165d252 100644
--- a/drivers/net/bonding/bond_netlink.c
+++ b/drivers/net/bonding/bond_netlink.c
@@ -199,7 +199,7 @@ static int bond_changelink(struct net_device *bond_dev,
 		nla_for_each_nested(attr, data[IFLA_BOND_ARP_IP_TARGET], rem) {
 			__be32 target = nla_get_be32(attr);
 
-			bond_opt_initval(&newval, target);
+			bond_opt_initval(&newval, (__force u64)target);
 			err = __bond_opt_set(bond, BOND_OPT_ARP_TARGETS,
 					     &newval);
 			if (err)
-- 
cgit v1.2.2


From 48d5dbaf9412c79a3fd75b6dbff7aa80ceb75cc4 Mon Sep 17 00:00:00 2001
From: Thomas Stilwell <stilwellt@openlabs.co>
Date: Mon, 10 Mar 2014 19:29:25 -0500
Subject: ieee802154: at86rf230: add support for rf233 chip

The rf233 and rf231 are sufficiently similar that we can treat
rf233 like rf231.

rf233 is missing some features that rf231 has, but we don't currently
make use of them so there's nothing to handle differently yet.

Should we add support in the future for rf231 *_NOCLK or SLEEP states,
or PAD_IO drive strength, exceptions will need to be made for rf233.

Signed-off-by: Thomas Stilwell <stilwellt@openlabs.co>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ieee802154/Kconfig     | 4 ++--
 drivers/net/ieee802154/at86rf230.c | 5 +++++
 2 files changed, 7 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ieee802154/Kconfig b/drivers/net/ieee802154/Kconfig
index 9aa06ec1e8a8..3e89beab64fd 100644
--- a/drivers/net/ieee802154/Kconfig
+++ b/drivers/net/ieee802154/Kconfig
@@ -32,10 +32,10 @@ config IEEE802154_FAKELB
 
 config IEEE802154_AT86RF230
 	depends on IEEE802154_DRIVERS && MAC802154
-	tristate "AT86RF230/231/212 transceiver driver"
+	tristate "AT86RF230/231/233/212 transceiver driver"
 	depends on SPI
 	---help---
-	  Say Y here to enable the at86rf230/231/212 SPI 802.15.4 wireless
+	  Say Y here to enable the at86rf230/231/233/212 SPI 802.15.4 wireless
 	  controller.
 
 	  This driver can also be built as a module. To do so, say M here.
diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index 03e24c560b2e..b8e732121a85 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -244,6 +244,7 @@ static bool is_rf212(struct at86rf230_local *local)
 #define STATE_TX_ON		0x09
 /* 0x0a - 0x0e */			/* 0x0a - UNSUPPORTED_ATTRIBUTE */
 #define STATE_SLEEP		0x0F
+#define STATE_PREP_DEEP_SLEEP	0x10
 #define STATE_BUSY_RX_AACK	0x11
 #define STATE_BUSY_TX_ARET	0x12
 #define STATE_RX_AACK_ON	0x16
@@ -1108,6 +1109,10 @@ static int at86rf230_probe(struct spi_device *spi)
 		if (version == 1)
 			ops = &at86rf212_ops;
 		break;
+	case 11:
+		chip = "at86rf233";
+		ops = &at86rf230_ops;
+		break;
 	default:
 		chip = "UNKNOWN";
 		break;
-- 
cgit v1.2.2


From 4f1d4d54f99e9302058764833028712c3454266b Mon Sep 17 00:00:00 2001
From: hayeswang <hayeswang@realtek.com>
Date: Tue, 11 Mar 2014 16:24:19 +0800
Subject: r8152: support dumping the hw counters

Add dumping the tally counter by ethtool.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/r8152.c | 95 +++++++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 93 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index a90a7eb91f1c..aa1d5b2e9c30 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -60,7 +60,7 @@
 #define PLA_TCR0		0xe610
 #define PLA_TCR1		0xe612
 #define PLA_TXFIFO_CTRL		0xe618
-#define PLA_RSTTELLY		0xe800
+#define PLA_RSTTALLY		0xe800
 #define PLA_CR			0xe813
 #define PLA_CRWECR		0xe81c
 #define PLA_CONFIG12		0xe81e	/* CONFIG1, CONFIG2 */
@@ -72,7 +72,7 @@
 #define PLA_MISC_0		0xe858
 #define PLA_MISC_1		0xe85a
 #define PLA_OCP_GPHY_BASE	0xe86c
-#define PLA_TELLYCNT		0xe890
+#define PLA_TALLYCNT		0xe890
 #define PLA_SFF_STS_7		0xe8de
 #define PLA_PHYSTATUS		0xe908
 #define PLA_BP_BA		0xfc26
@@ -180,6 +180,9 @@
 /* PLA_TCR1 */
 #define VERSION_MASK		0x7cf0
 
+/* PLA_RSTTALLY */
+#define TALLY_RESET		0x0001
+
 /* PLA_CR */
 #define CR_RST			0x10
 #define CR_RE			0x08
@@ -465,6 +468,22 @@ enum rtl8152_flags {
 #define REALTEK_USB_DEVICE(vend, prod)	\
 	USB_DEVICE_INTERFACE_CLASS(vend, prod, USB_CLASS_VENDOR_SPEC)
 
+struct tally_counter {
+	__le64	tx_packets;
+	__le64	rx_packets;
+	__le64	tx_errors;
+	__le32	rx_errors;
+	__le16	rx_missed;
+	__le16	align_errors;
+	__le32	tx_one_collision;
+	__le32	tx_multi_collision;
+	__le64	rx_unicast;
+	__le64	rx_broadcast;
+	__le32	rx_multicast;
+	__le16	tx_aborted;
+	__le16	tx_underun;
+};
+
 struct rx_desc {
 	__le32 opts1;
 #define RX_LEN_MASK			0x7fff
@@ -2872,6 +2891,15 @@ static void r8152b_enable_fc(struct r8152 *tp)
 	r8152_mdio_write(tp, MII_ADVERTISE, anar);
 }
 
+static void rtl_tally_reset(struct r8152 *tp)
+{
+	u32 ocp_data;
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_RSTTALLY);
+	ocp_data |= TALLY_RESET;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RSTTALLY, ocp_data);
+}
+
 static void r8152b_init(struct r8152 *tp)
 {
 	u32 ocp_data;
@@ -2898,6 +2926,7 @@ static void r8152b_init(struct r8152 *tp)
 	r8152b_enable_eee(tp);
 	r8152b_enable_aldps(tp);
 	r8152b_enable_fc(tp);
+	rtl_tally_reset(tp);
 
 	/* enable rx aggregation */
 	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
@@ -2965,6 +2994,7 @@ static void r8153_init(struct r8152 *tp)
 	r8153_enable_eee(tp);
 	r8153_enable_aldps(tp);
 	r8152b_enable_fc(tp);
+	rtl_tally_reset(tp);
 }
 
 static int rtl8152_suspend(struct usb_interface *intf, pm_message_t message)
@@ -3105,6 +3135,64 @@ out:
 	return ret;
 }
 
+static const char rtl8152_gstrings[][ETH_GSTRING_LEN] = {
+	"tx_packets",
+	"rx_packets",
+	"tx_errors",
+	"rx_errors",
+	"rx_missed",
+	"align_errors",
+	"tx_single_collisions",
+	"tx_multi_collisions",
+	"rx_unicast",
+	"rx_broadcast",
+	"rx_multicast",
+	"tx_aborted",
+	"tx_underrun",
+};
+
+static int rtl8152_get_sset_count(struct net_device *dev, int sset)
+{
+	switch (sset) {
+	case ETH_SS_STATS:
+		return ARRAY_SIZE(rtl8152_gstrings);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static void rtl8152_get_ethtool_stats(struct net_device *dev,
+				      struct ethtool_stats *stats, u64 *data)
+{
+	struct r8152 *tp = netdev_priv(dev);
+	struct tally_counter tally;
+
+	generic_ocp_read(tp, PLA_TALLYCNT, sizeof(tally), &tally, MCU_TYPE_PLA);
+
+	data[0] = le64_to_cpu(tally.tx_packets);
+	data[1] = le64_to_cpu(tally.rx_packets);
+	data[2] = le64_to_cpu(tally.tx_errors);
+	data[3] = le32_to_cpu(tally.rx_errors);
+	data[4] = le16_to_cpu(tally.rx_missed);
+	data[5] = le16_to_cpu(tally.align_errors);
+	data[6] = le32_to_cpu(tally.tx_one_collision);
+	data[7] = le32_to_cpu(tally.tx_multi_collision);
+	data[8] = le64_to_cpu(tally.rx_unicast);
+	data[9] = le64_to_cpu(tally.rx_broadcast);
+	data[10] = le32_to_cpu(tally.rx_multicast);
+	data[11] = le16_to_cpu(tally.tx_aborted);
+	data[12] = le16_to_cpu(tally.tx_underun);
+}
+
+static void rtl8152_get_strings(struct net_device *dev, u32 stringset, u8 *data)
+{
+	switch (stringset) {
+	case ETH_SS_STATS:
+		memcpy(data, *rtl8152_gstrings, sizeof(rtl8152_gstrings));
+		break;
+	}
+}
+
 static struct ethtool_ops ops = {
 	.get_drvinfo = rtl8152_get_drvinfo,
 	.get_settings = rtl8152_get_settings,
@@ -3114,6 +3202,9 @@ static struct ethtool_ops ops = {
 	.set_msglevel = rtl8152_set_msglevel,
 	.get_wol = rtl8152_get_wol,
 	.set_wol = rtl8152_set_wol,
+	.get_strings = rtl8152_get_strings,
+	.get_sset_count = rtl8152_get_sset_count,
+	.get_ethtool_stats = rtl8152_get_ethtool_stats,
 };
 
 static int rtl8152_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
-- 
cgit v1.2.2


From b338ce270ed589f8a7b62e239632baa48f947b17 Mon Sep 17 00:00:00 2001
From: Claudiu Manoil <claudiu.manoil@freescale.com>
Date: Tue, 11 Mar 2014 18:01:24 +0200
Subject: gianfar: Fix multi-queue support checks @probe()

priv is not instantiated at gfar_of_init() time, when
parsing the DT for info on supported HW queues.  Before
the netdev can be allocated, the number of supported
queues must be known.  Because the number of supported
queues depends on device type, move the compatibility
checks before netdev allocation.  Local vars are used
to hold the operation mode info before netdev allocation.
This fixes the null accesses for priv->.., in gfar_of_init.

Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/freescale/gianfar.c | 28 ++++++++++++++++++----------
 1 file changed, 18 insertions(+), 10 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index 28effbecdab6..68d9bf7940f6 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -733,21 +733,30 @@ static int gfar_of_init(struct platform_device *ofdev, struct net_device **pdev)
 	const u32 *stash_idx;
 	unsigned int num_tx_qs, num_rx_qs;
 	u32 *tx_queues, *rx_queues;
+	unsigned short mode, poll_mode;
 
 	if (!np || !of_device_is_available(np))
 		return -ENODEV;
 
+	if (of_device_is_compatible(np, "fsl,etsec2")) {
+		mode = MQ_MG_MODE;
+		poll_mode = GFAR_SQ_POLLING;
+	} else {
+		mode = SQ_SG_MODE;
+		poll_mode = GFAR_SQ_POLLING;
+	}
+
 	/* parse the num of HW tx and rx queues */
 	tx_queues = (u32 *)of_get_property(np, "fsl,num_tx_queues", NULL);
 	rx_queues = (u32 *)of_get_property(np, "fsl,num_rx_queues", NULL);
 
-	if (priv->mode == SQ_SG_MODE) {
+	if (mode == SQ_SG_MODE) {
 		num_tx_qs = 1;
 		num_rx_qs = 1;
 	} else { /* MQ_MG_MODE */
-		if (priv->poll_mode == GFAR_SQ_POLLING) {
-			num_tx_qs = 2; /* one q per int group */
-			num_rx_qs = 2; /* one q per int group */
+		if (poll_mode == GFAR_SQ_POLLING) {
+			num_tx_qs = 2; /* one txq per int group */
+			num_rx_qs = 2; /* one rxq per int group */
 		} else { /* GFAR_MQ_POLLING */
 			num_tx_qs = tx_queues ? *tx_queues : 1;
 			num_rx_qs = rx_queues ? *rx_queues : 1;
@@ -776,6 +785,9 @@ static int gfar_of_init(struct platform_device *ofdev, struct net_device **pdev)
 	priv = netdev_priv(dev);
 	priv->ndev = dev;
 
+	priv->mode = mode;
+	priv->poll_mode = poll_mode;
+
 	priv->num_tx_queues = num_tx_qs;
 	netif_set_real_num_rx_queues(dev, num_rx_qs);
 	priv->num_rx_queues = num_rx_qs;
@@ -799,17 +811,13 @@ static int gfar_of_init(struct platform_device *ofdev, struct net_device **pdev)
 		priv->gfargrp[i].regs = NULL;
 
 	/* Parse and initialize group specific information */
-	if (of_device_is_compatible(np, "fsl,etsec2")) {
-		priv->mode = MQ_MG_MODE;
-		priv->poll_mode = GFAR_SQ_POLLING;
+	if (priv->mode == MQ_MG_MODE) {
 		for_each_child_of_node(np, child) {
 			err = gfar_parse_group(child, priv, model);
 			if (err)
 				goto err_grp_init;
 		}
-	} else {
-		priv->mode = SQ_SG_MODE;
-		priv->poll_mode = GFAR_SQ_POLLING;
+	} else { /* SQ_SG_MODE */
 		err = gfar_parse_group(np, priv, model);
 		if (err)
 			goto err_grp_init;
-- 
cgit v1.2.2


From b779d0afccffaceda3169b3810faa23444f13b9e Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Wed, 12 Mar 2014 10:22:30 -0700
Subject: brocade: Convert uses of __constant_<foo> to <foo>

The use of __constant_<foo> has been unnecessary for quite awhile now.

Make these uses consistent with the rest of the kernel.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/brocade/bna/bnad.c | 16 ++++++----------
 1 file changed, 6 insertions(+), 10 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/brocade/bna/bnad.c b/drivers/net/ethernet/brocade/bna/bnad.c
index aeec9ccc0b39..cb7625366ec2 100644
--- a/drivers/net/ethernet/brocade/bna/bnad.c
+++ b/drivers/net/ethernet/brocade/bna/bnad.c
@@ -2845,13 +2845,11 @@ bnad_txq_wi_prepare(struct bnad *bnad, struct bna_tcb *tcb,
 		}
 		if (unlikely((gso_size + skb_transport_offset(skb) +
 			      tcp_hdrlen(skb)) >= skb->len)) {
-			txqent->hdr.wi.opcode =
-				__constant_htons(BNA_TXQ_WI_SEND);
+			txqent->hdr.wi.opcode = htons(BNA_TXQ_WI_SEND);
 			txqent->hdr.wi.lso_mss = 0;
 			BNAD_UPDATE_CTR(bnad, tx_skb_tso_too_short);
 		} else {
-			txqent->hdr.wi.opcode =
-				__constant_htons(BNA_TXQ_WI_SEND_LSO);
+			txqent->hdr.wi.opcode = htons(BNA_TXQ_WI_SEND_LSO);
 			txqent->hdr.wi.lso_mss = htons(gso_size);
 		}
 
@@ -2865,7 +2863,7 @@ bnad_txq_wi_prepare(struct bnad *bnad, struct bna_tcb *tcb,
 			htons(BNA_TXQ_WI_L4_HDR_N_OFFSET(
 			tcp_hdrlen(skb) >> 2, skb_transport_offset(skb)));
 	} else  {
-		txqent->hdr.wi.opcode =	__constant_htons(BNA_TXQ_WI_SEND);
+		txqent->hdr.wi.opcode =	htons(BNA_TXQ_WI_SEND);
 		txqent->hdr.wi.lso_mss = 0;
 
 		if (unlikely(skb->len > (bnad->netdev->mtu + ETH_HLEN))) {
@@ -2876,11 +2874,10 @@ bnad_txq_wi_prepare(struct bnad *bnad, struct bna_tcb *tcb,
 		if (skb->ip_summed == CHECKSUM_PARTIAL) {
 			u8 proto = 0;
 
-			if (skb->protocol == __constant_htons(ETH_P_IP))
+			if (skb->protocol == htons(ETH_P_IP))
 				proto = ip_hdr(skb)->protocol;
 #ifdef NETIF_F_IPV6_CSUM
-			else if (skb->protocol ==
-				 __constant_htons(ETH_P_IPV6)) {
+			else if (skb->protocol == htons(ETH_P_IPV6)) {
 				/* nexthdr may not be TCP immediately. */
 				proto = ipv6_hdr(skb)->nexthdr;
 			}
@@ -3062,8 +3059,7 @@ bnad_start_xmit(struct sk_buff *skb, struct net_device *netdev)
 			vect_id = 0;
 			BNA_QE_INDX_INC(prod, q_depth);
 			txqent = &((struct bna_txq_entry *)tcb->sw_q)[prod];
-			txqent->hdr.wi_ext.opcode =
-				__constant_htons(BNA_TXQ_WI_EXTENSION);
+			txqent->hdr.wi_ext.opcode = htons(BNA_TXQ_WI_EXTENSION);
 			unmap = &unmap_q[prod];
 		}
 
-- 
cgit v1.2.2


From ceffc4acfc8c4cf4badaa93921f00e2b34e24a97 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Wed, 12 Mar 2014 10:22:36 -0700
Subject: xilinx: Convert uses of __constant_<foo> to <foo>

The use of __constant_<foo> has been unnecessary for quite awhile now.

Make these uses consistent with the rest of the kernel.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/xilinx/ll_temac_main.c       | 4 ++--
 drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/xilinx/ll_temac_main.c b/drivers/net/ethernet/xilinx/ll_temac_main.c
index a4347508031c..fa193c4688da 100644
--- a/drivers/net/ethernet/xilinx/ll_temac_main.c
+++ b/drivers/net/ethernet/xilinx/ll_temac_main.c
@@ -771,8 +771,8 @@ static void ll_temac_recv(struct net_device *ndev)
 
 		/* if we're doing rx csum offload, set it up */
 		if (((lp->temac_features & TEMAC_FEATURE_RX_CSUM) != 0) &&
-			(skb->protocol == __constant_htons(ETH_P_IP)) &&
-			(skb->len > 64)) {
+		    (skb->protocol == htons(ETH_P_IP)) &&
+		    (skb->len > 64)) {
 
 			skb->csum = cur_p->app3 & 0xFFFF;
 			skb->ip_summed = CHECKSUM_COMPLETE;
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 4bfdf8c7ada0..7b0a73556264 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -756,7 +756,7 @@ static void axienet_recv(struct net_device *ndev)
 				skb->ip_summed = CHECKSUM_UNNECESSARY;
 			}
 		} else if ((lp->features & XAE_FEATURE_PARTIAL_RX_CSUM) != 0 &&
-			   skb->protocol == __constant_htons(ETH_P_IP) &&
+			   skb->protocol == htons(ETH_P_IP) &&
 			   skb->len > 64) {
 			skb->csum = be32_to_cpu(cur_p->app3 & 0xFFFF);
 			skb->ip_summed = CHECKSUM_COMPLETE;
-- 
cgit v1.2.2


From 1f36fc74d87fd6b09d8326879882a60c5399fe29 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Wed, 12 Mar 2014 10:22:37 -0700
Subject: lg-vl600: Convert uses of __constant_<foo> to <foo>

The use of __constant_<foo> has been unnecessary for quite awhile now.

Make these uses consistent with the rest of the kernel.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/lg-vl600.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/lg-vl600.c b/drivers/net/usb/lg-vl600.c
index acfcc32b323d..8f37efd2d2fb 100644
--- a/drivers/net/usb/lg-vl600.c
+++ b/drivers/net/usb/lg-vl600.c
@@ -210,7 +210,7 @@ static int vl600_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 			 * (0x86dd) so Linux can understand it.
 			 */
 			if ((buf->data[sizeof(*ethhdr)] & 0xf0) == 0x60)
-				ethhdr->h_proto = __constant_htons(ETH_P_IPV6);
+				ethhdr->h_proto = htons(ETH_P_IPV6);
 		}
 
 		if (count) {
-- 
cgit v1.2.2


From 6ee51a4e866bbb0921180b457ed16cd172859346 Mon Sep 17 00:00:00 2001
From: Jack Morgenstein <jackm@dev.mellanox.co.il>
Date: Wed, 12 Mar 2014 12:00:37 +0200
Subject: mlx4: Adjust QP1 multiplexing for RoCE/SRIOV

This requires the following modifications:
1. Fix build_mlx4_header to properly fill in the ETH fields
2. Adjust mux and demux QP1 flow to support RoCE.

This commit still assumes only one GID per slave for RoCE.
The commit enabling multiple GIDs is a subsequent commit, and
is done separately because of its complexity.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/mellanox/mlx4/mlx4.h |  5 +++++
 drivers/net/ethernet/mellanox/mlx4/port.c | 34 +++++++++++++++++++++++++++++++
 2 files changed, 39 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4.h b/drivers/net/ethernet/mellanox/mlx4/mlx4.h
index 7aec6c833973..da829f4ef938 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4.h
@@ -788,6 +788,10 @@ enum {
 	MLX4_USE_RR	= 1,
 };
 
+struct mlx4_roce_gid_entry {
+	u8 raw[16];
+};
+
 struct mlx4_priv {
 	struct mlx4_dev		dev;
 
@@ -834,6 +838,7 @@ struct mlx4_priv {
 	int			fs_hash_mode;
 	u8 virt2phys_pkey[MLX4_MFUNC_MAX][MLX4_MAX_PORTS][MLX4_MAX_PORT_PKEYS];
 	__be64			slave_node_guids[MLX4_MFUNC_MAX];
+	struct mlx4_roce_gid_entry roce_gids[MLX4_MAX_PORTS][MLX4_ROCE_MAX_GIDS];
 
 	atomic_t		opreq_count;
 	struct work_struct	opreq_task;
diff --git a/drivers/net/ethernet/mellanox/mlx4/port.c b/drivers/net/ethernet/mellanox/mlx4/port.c
index a58bcbf1b806..9c063d6122b3 100644
--- a/drivers/net/ethernet/mellanox/mlx4/port.c
+++ b/drivers/net/ethernet/mellanox/mlx4/port.c
@@ -927,3 +927,37 @@ void mlx4_set_stats_bitmap(struct mlx4_dev *dev, u64 *stats_bitmap)
 		*stats_bitmap |= MLX4_STATS_ERROR_COUNTERS_MASK;
 }
 EXPORT_SYMBOL(mlx4_set_stats_bitmap);
+
+int mlx4_get_slave_from_roce_gid(struct mlx4_dev *dev, int port, u8 *gid, int *slave_id)
+{
+	struct mlx4_priv *priv = mlx4_priv(dev);
+	int i, found_ix = -1;
+
+	if (!mlx4_is_mfunc(dev))
+		return -EINVAL;
+
+	for (i = 0; i < MLX4_ROCE_MAX_GIDS; i++) {
+		if (!memcmp(priv->roce_gids[port - 1][i].raw, gid, 16)) {
+			found_ix = i;
+			break;
+		}
+	}
+
+	if (found_ix >= 0)
+		*slave_id = found_ix;
+
+	return (found_ix >= 0) ? 0 : -EINVAL;
+}
+EXPORT_SYMBOL(mlx4_get_slave_from_roce_gid);
+
+int mlx4_get_roce_gid_from_slave(struct mlx4_dev *dev, int port, int slave_id, u8 *gid)
+{
+	struct mlx4_priv *priv = mlx4_priv(dev);
+
+	if (!mlx4_is_master(dev))
+		return -EINVAL;
+
+	memcpy(gid, priv->roce_gids[port - 1][slave_id].raw, 16);
+	return 0;
+}
+EXPORT_SYMBOL(mlx4_get_roce_gid_from_slave);
-- 
cgit v1.2.2


From 9cd593529c8652785bc9962acc79b6b176741f99 Mon Sep 17 00:00:00 2001
From: Jack Morgenstein <jackm@dev.mellanox.co.il>
Date: Wed, 12 Mar 2014 12:00:38 +0200
Subject: mlx4_core: For RoCE, allow slaves to set the GID entry at that
 slave's index

For IB transport, the host determines the slave GIDs. For ETH (RoCE),
however, the slave's GID is determined by the IP address that the slave
itself assigns to the ETH device used by RoCE.

In this case, the slave must be able to write its GIDs to the HCA gid table
(at the GID indices that slave "owns").

This commit adds processing for the SET_PORT_GID_TABLE opcode modifier
for the SET_PORT command wrapper (so that slaves may modify their GIDS
for RoCE).

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/mellanox/mlx4/port.c | 33 ++++++++++++++++++++++++++++---
 1 file changed, 30 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/mellanox/mlx4/port.c b/drivers/net/ethernet/mellanox/mlx4/port.c
index 9c063d6122b3..591740b06043 100644
--- a/drivers/net/ethernet/mellanox/mlx4/port.c
+++ b/drivers/net/ethernet/mellanox/mlx4/port.c
@@ -505,6 +505,7 @@ int mlx4_get_port_ib_caps(struct mlx4_dev *dev, u8 port, __be32 *caps)
 	mlx4_free_cmd_mailbox(dev, outmailbox);
 	return err;
 }
+static struct mlx4_roce_gid_entry zgid_entry;
 
 static int mlx4_common_set_port(struct mlx4_dev *dev, int slave, u32 in_mod,
 				u8 op_mod, struct mlx4_cmd_mailbox *inbox)
@@ -515,6 +516,7 @@ static int mlx4_common_set_port(struct mlx4_dev *dev, int slave, u32 in_mod,
 	struct mlx4_slave_state *slave_st = &master->slave_state[slave];
 	struct mlx4_set_port_rqp_calc_context *qpn_context;
 	struct mlx4_set_port_general_context *gen_context;
+	struct mlx4_roce_gid_entry *gid_entry;
 	int reset_qkey_viols;
 	int port;
 	int is_eth;
@@ -535,7 +537,8 @@ static int mlx4_common_set_port(struct mlx4_dev *dev, int slave, u32 in_mod,
 	/* Slaves cannot perform SET_PORT operations except changing MTU */
 	if (is_eth) {
 		if (slave != dev->caps.function &&
-		    in_modifier != MLX4_SET_PORT_GENERAL) {
+		    in_modifier != MLX4_SET_PORT_GENERAL &&
+		    in_modifier != MLX4_SET_PORT_GID_TABLE) {
 			mlx4_warn(dev, "denying SET_PORT for slave:%d\n",
 					slave);
 			return -EINVAL;
@@ -581,6 +584,28 @@ static int mlx4_common_set_port(struct mlx4_dev *dev, int slave, u32 in_mod,
 
 			gen_context->mtu = cpu_to_be16(master->max_mtu[port]);
 			break;
+		case MLX4_SET_PORT_GID_TABLE:
+			gid_entry = (struct mlx4_roce_gid_entry *)(inbox->buf);
+			/* check that do not have duplicates */
+			if (memcmp(gid_entry->raw, zgid_entry.raw, 16)) {
+				for (i = 0; i < MLX4_ROCE_MAX_GIDS; i++) {
+					if (slave != i &&
+					    !memcmp(gid_entry->raw, priv->roce_gids[port - 1][i].raw, 16)) {
+						mlx4_warn(dev, "requested gid entry for slave:%d "
+							  "is a duplicate of slave %d\n",
+							  slave, i);
+						return -EEXIST;
+					}
+				}
+			}
+			/* insert slave GID at proper index */
+			memcpy(priv->roce_gids[port - 1][slave].raw, gid_entry->raw, 16);
+			/* rewrite roce port gids table to FW */
+			for (i = 0; i < MLX4_ROCE_MAX_GIDS; i++) {
+				memcpy(gid_entry->raw, priv->roce_gids[port - 1][i].raw, 16);
+				gid_entry++;
+			}
+			break;
 		}
 		return mlx4_cmd(dev, inbox->dma, in_mod, op_mod,
 				MLX4_CMD_SET_PORT, MLX4_CMD_TIME_CLASS_B,
@@ -928,7 +953,8 @@ void mlx4_set_stats_bitmap(struct mlx4_dev *dev, u64 *stats_bitmap)
 }
 EXPORT_SYMBOL(mlx4_set_stats_bitmap);
 
-int mlx4_get_slave_from_roce_gid(struct mlx4_dev *dev, int port, u8 *gid, int *slave_id)
+int mlx4_get_slave_from_roce_gid(struct mlx4_dev *dev, int port, u8 *gid,
+				 int *slave_id)
 {
 	struct mlx4_priv *priv = mlx4_priv(dev);
 	int i, found_ix = -1;
@@ -950,7 +976,8 @@ int mlx4_get_slave_from_roce_gid(struct mlx4_dev *dev, int port, u8 *gid, int *s
 }
 EXPORT_SYMBOL(mlx4_get_slave_from_roce_gid);
 
-int mlx4_get_roce_gid_from_slave(struct mlx4_dev *dev, int port, int slave_id, u8 *gid)
+int mlx4_get_roce_gid_from_slave(struct mlx4_dev *dev, int port, int slave_id,
+				 u8 *gid)
 {
 	struct mlx4_priv *priv = mlx4_priv(dev);
 
-- 
cgit v1.2.2


From b6ffaeffaea4d92f05f5ba1ef54df407cb7c8517 Mon Sep 17 00:00:00 2001
From: Jack Morgenstein <jackm@dev.mellanox.co.il>
Date: Wed, 12 Mar 2014 12:00:39 +0200
Subject: mlx4: In RoCE allow guests to have multiple GIDS

The GIDs are statically distributed, as follows:
PF: gets 16 GIDs
VFs:  Remaining GIDS are divided evenly between VFs activated by the driver.
      If the division is not even, lower-numbered VFs get an extra GID.

For an IB interface, the number of gids per guest remains as before: one gid per guest.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/mellanox/mlx4/fw.c            |   5 +-
 drivers/net/ethernet/mellanox/mlx4/main.c          |   6 +-
 drivers/net/ethernet/mellanox/mlx4/mlx4.h          |   3 +
 drivers/net/ethernet/mellanox/mlx4/port.c          | 117 +++++++++++++++++----
 .../net/ethernet/mellanox/mlx4/resource_tracker.c  |  64 ++++++++---
 5 files changed, 161 insertions(+), 34 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/mellanox/mlx4/fw.c b/drivers/net/ethernet/mellanox/mlx4/fw.c
index 9cdf452140da..6e1ee2170a39 100644
--- a/drivers/net/ethernet/mellanox/mlx4/fw.c
+++ b/drivers/net/ethernet/mellanox/mlx4/fw.c
@@ -934,7 +934,10 @@ int mlx4_QUERY_PORT_wrapper(struct mlx4_dev *dev, int slave,
 		MLX4_PUT(outbox->buf, port_type,
 			 QUERY_PORT_SUPPORTED_TYPE_OFFSET);
 
-		short_field = 1; /* slave max gids */
+		if (dev->caps.port_type[vhcr->in_modifier] == MLX4_PORT_TYPE_ETH)
+			short_field = mlx4_get_slave_num_gids(dev, slave);
+		else
+			short_field = 1; /* slave max gids */
 		MLX4_PUT(outbox->buf, short_field,
 			 QUERY_PORT_CUR_MAX_GID_OFFSET);
 
diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c
index 979ea4364efb..4c441aa83016 100644
--- a/drivers/net/ethernet/mellanox/mlx4/main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/main.c
@@ -1462,7 +1462,11 @@ static void mlx4_parav_master_pf_caps(struct mlx4_dev *dev)
 	int i;
 
 	for (i = 1; i <= dev->caps.num_ports; i++) {
-		dev->caps.gid_table_len[i] = 1;
+		if (dev->caps.port_type[i] == MLX4_PORT_TYPE_ETH)
+			dev->caps.gid_table_len[i] =
+				mlx4_get_slave_num_gids(dev, 0);
+		else
+			dev->caps.gid_table_len[i] = 1;
 		dev->caps.pkey_table_len[i] =
 			dev->phys_caps.pkey_phys_table_len[i] - 1;
 	}
diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4.h b/drivers/net/ethernet/mellanox/mlx4/mlx4.h
index da829f4ef938..6ba38c98c492 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4.h
@@ -1287,4 +1287,7 @@ void mlx4_vf_immed_vlan_work_handler(struct work_struct *_work);
 
 void mlx4_init_quotas(struct mlx4_dev *dev);
 
+int mlx4_get_slave_num_gids(struct mlx4_dev *dev, int slave);
+int mlx4_get_base_gid_ix(struct mlx4_dev *dev, int slave);
+
 #endif /* MLX4_H */
diff --git a/drivers/net/ethernet/mellanox/mlx4/port.c b/drivers/net/ethernet/mellanox/mlx4/port.c
index 591740b06043..ece328166e94 100644
--- a/drivers/net/ethernet/mellanox/mlx4/port.c
+++ b/drivers/net/ethernet/mellanox/mlx4/port.c
@@ -507,6 +507,31 @@ int mlx4_get_port_ib_caps(struct mlx4_dev *dev, u8 port, __be32 *caps)
 }
 static struct mlx4_roce_gid_entry zgid_entry;
 
+int mlx4_get_slave_num_gids(struct mlx4_dev *dev, int slave)
+{
+	if (slave == 0)
+		return MLX4_ROCE_PF_GIDS;
+	if (slave <= ((MLX4_ROCE_MAX_GIDS - MLX4_ROCE_PF_GIDS) % dev->num_vfs))
+		return ((MLX4_ROCE_MAX_GIDS - MLX4_ROCE_PF_GIDS) / dev->num_vfs) + 1;
+	return (MLX4_ROCE_MAX_GIDS - MLX4_ROCE_PF_GIDS) / dev->num_vfs;
+}
+
+int mlx4_get_base_gid_ix(struct mlx4_dev *dev, int slave)
+{
+	int gids;
+	int vfs;
+
+	gids = MLX4_ROCE_MAX_GIDS - MLX4_ROCE_PF_GIDS;
+	vfs = dev->num_vfs;
+
+	if (slave == 0)
+		return 0;
+	if (slave <= gids % vfs)
+		return MLX4_ROCE_PF_GIDS + ((gids / vfs) + 1) * (slave - 1);
+
+	return MLX4_ROCE_PF_GIDS + (gids % vfs) + ((gids / vfs) * (slave - 1));
+}
+
 static int mlx4_common_set_port(struct mlx4_dev *dev, int slave, u32 in_mod,
 				u8 op_mod, struct mlx4_cmd_mailbox *inbox)
 {
@@ -516,15 +541,18 @@ static int mlx4_common_set_port(struct mlx4_dev *dev, int slave, u32 in_mod,
 	struct mlx4_slave_state *slave_st = &master->slave_state[slave];
 	struct mlx4_set_port_rqp_calc_context *qpn_context;
 	struct mlx4_set_port_general_context *gen_context;
-	struct mlx4_roce_gid_entry *gid_entry;
+	struct mlx4_roce_gid_entry *gid_entry_tbl, *gid_entry_mbox, *gid_entry_mb1;
 	int reset_qkey_viols;
 	int port;
 	int is_eth;
+	int num_gids;
+	int base;
 	u32 in_modifier;
 	u32 promisc;
 	u16 mtu, prev_mtu;
 	int err;
-	int i;
+	int i, j;
+	int offset;
 	__be32 agg_cap_mask;
 	__be32 slave_cap_mask;
 	__be32 new_cap_mask;
@@ -585,26 +613,65 @@ static int mlx4_common_set_port(struct mlx4_dev *dev, int slave, u32 in_mod,
 			gen_context->mtu = cpu_to_be16(master->max_mtu[port]);
 			break;
 		case MLX4_SET_PORT_GID_TABLE:
-			gid_entry = (struct mlx4_roce_gid_entry *)(inbox->buf);
-			/* check that do not have duplicates */
-			if (memcmp(gid_entry->raw, zgid_entry.raw, 16)) {
-				for (i = 0; i < MLX4_ROCE_MAX_GIDS; i++) {
-					if (slave != i &&
-					    !memcmp(gid_entry->raw, priv->roce_gids[port - 1][i].raw, 16)) {
-						mlx4_warn(dev, "requested gid entry for slave:%d "
-							  "is a duplicate of slave %d\n",
-							  slave, i);
-						return -EEXIST;
+			/* change to MULTIPLE entries: number of guest's gids
+			 * need a FOR-loop here over number of gids the guest has.
+			 * 1. Check no duplicates in gids passed by slave
+			 */
+			num_gids = mlx4_get_slave_num_gids(dev, slave);
+			base = mlx4_get_base_gid_ix(dev, slave);
+			gid_entry_mbox = (struct mlx4_roce_gid_entry *)(inbox->buf);
+			for (i = 0; i < num_gids; gid_entry_mbox++, i++) {
+				if (!memcmp(gid_entry_mbox->raw, zgid_entry.raw,
+					    sizeof(zgid_entry)))
+					continue;
+				gid_entry_mb1 = gid_entry_mbox + 1;
+				for (j = i + 1; j < num_gids; gid_entry_mb1++, j++) {
+					if (!memcmp(gid_entry_mb1->raw,
+						    zgid_entry.raw, sizeof(zgid_entry)))
+						continue;
+					if (!memcmp(gid_entry_mb1->raw, gid_entry_mbox->raw,
+						    sizeof(gid_entry_mbox->raw))) {
+						/* found duplicate */
+						return -EINVAL;
 					}
 				}
 			}
-			/* insert slave GID at proper index */
-			memcpy(priv->roce_gids[port - 1][slave].raw, gid_entry->raw, 16);
-			/* rewrite roce port gids table to FW */
+
+			/* 2. Check that do not have duplicates in OTHER
+			 *    entries in the port GID table
+			 */
 			for (i = 0; i < MLX4_ROCE_MAX_GIDS; i++) {
-				memcpy(gid_entry->raw, priv->roce_gids[port - 1][i].raw, 16);
-				gid_entry++;
+				if (i >= base && i < base + num_gids)
+					continue; /* don't compare to slave's current gids */
+				gid_entry_tbl = &priv->roce_gids[port - 1][i];
+				if (!memcmp(gid_entry_tbl->raw, zgid_entry.raw, sizeof(zgid_entry)))
+					continue;
+				gid_entry_mbox = (struct mlx4_roce_gid_entry *)(inbox->buf);
+				for (j = 0; j < num_gids; gid_entry_mbox++, j++) {
+					if (!memcmp(gid_entry_mbox->raw, zgid_entry.raw,
+						    sizeof(zgid_entry)))
+						continue;
+					if (!memcmp(gid_entry_mbox->raw, gid_entry_tbl->raw,
+						    sizeof(gid_entry_tbl->raw))) {
+						/* found duplicate */
+						mlx4_warn(dev, "requested gid entry for slave:%d "
+							  "is a duplicate of gid at index %d\n",
+							  slave, i);
+						return -EINVAL;
+					}
+				}
 			}
+
+			/* insert slave GIDs with memcpy, starting at slave's base index */
+			gid_entry_mbox = (struct mlx4_roce_gid_entry *)(inbox->buf);
+			for (i = 0, offset = base; i < num_gids; gid_entry_mbox++, offset++, i++)
+				memcpy(priv->roce_gids[port - 1][offset].raw, gid_entry_mbox->raw, 16);
+
+			/* Now, copy roce port gids table to current mailbox for passing to FW */
+			gid_entry_mbox = (struct mlx4_roce_gid_entry *)(inbox->buf);
+			for (i = 0; i < MLX4_ROCE_MAX_GIDS; gid_entry_mbox++, i++)
+				memcpy(gid_entry_mbox->raw, priv->roce_gids[port - 1][i].raw, 16);
+
 			break;
 		}
 		return mlx4_cmd(dev, inbox->dma, in_mod, op_mod,
@@ -958,6 +1025,7 @@ int mlx4_get_slave_from_roce_gid(struct mlx4_dev *dev, int port, u8 *gid,
 {
 	struct mlx4_priv *priv = mlx4_priv(dev);
 	int i, found_ix = -1;
+	int vf_gids = MLX4_ROCE_MAX_GIDS - MLX4_ROCE_PF_GIDS;
 
 	if (!mlx4_is_mfunc(dev))
 		return -EINVAL;
@@ -969,8 +1037,19 @@ int mlx4_get_slave_from_roce_gid(struct mlx4_dev *dev, int port, u8 *gid,
 		}
 	}
 
-	if (found_ix >= 0)
-		*slave_id = found_ix;
+	if (found_ix >= 0) {
+		if (found_ix < MLX4_ROCE_PF_GIDS)
+			*slave_id = 0;
+		else if (found_ix < MLX4_ROCE_PF_GIDS + (vf_gids % dev->num_vfs) *
+			 (vf_gids / dev->num_vfs + 1))
+			*slave_id = ((found_ix - MLX4_ROCE_PF_GIDS) /
+				     (vf_gids / dev->num_vfs + 1)) + 1;
+		else
+			*slave_id =
+			((found_ix - MLX4_ROCE_PF_GIDS -
+			  ((vf_gids % dev->num_vfs) * ((vf_gids / dev->num_vfs + 1)))) /
+			 (vf_gids / dev->num_vfs)) + vf_gids % dev->num_vfs + 1;
+	}
 
 	return (found_ix >= 0) ? 0 : -EINVAL;
 }
diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
index 57428a0cb9dd..1c3634eab5e1 100644
--- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
+++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
@@ -219,6 +219,11 @@ struct res_fs_rule {
 	int			qpn;
 };
 
+static int mlx4_is_eth(struct mlx4_dev *dev, int port)
+{
+	return dev->caps.port_mask[port] == MLX4_PORT_TYPE_IB ? 0 : 1;
+}
+
 static void *res_tracker_lookup(struct rb_root *root, u64 res_id)
 {
 	struct rb_node *node = root->rb_node;
@@ -600,15 +605,34 @@ static void update_gid(struct mlx4_dev *dev, struct mlx4_cmd_mailbox *inbox,
 	struct mlx4_qp_context	*qp_ctx = inbox->buf + 8;
 	enum mlx4_qp_optpar	optpar = be32_to_cpu(*(__be32 *) inbox->buf);
 	u32			ts = (be32_to_cpu(qp_ctx->flags) >> 16) & 0xff;
+	int port;
 
-	if (MLX4_QP_ST_UD == ts)
-		qp_ctx->pri_path.mgid_index = 0x80 | slave;
-
-	if (MLX4_QP_ST_RC == ts || MLX4_QP_ST_UC == ts) {
-		if (optpar & MLX4_QP_OPTPAR_PRIMARY_ADDR_PATH)
-			qp_ctx->pri_path.mgid_index = slave & 0x7F;
-		if (optpar & MLX4_QP_OPTPAR_ALT_ADDR_PATH)
-			qp_ctx->alt_path.mgid_index = slave & 0x7F;
+	if (MLX4_QP_ST_UD == ts) {
+		port = (qp_ctx->pri_path.sched_queue >> 6 & 1) + 1;
+		if (mlx4_is_eth(dev, port))
+			qp_ctx->pri_path.mgid_index = mlx4_get_base_gid_ix(dev, slave) | 0x80;
+		else
+			qp_ctx->pri_path.mgid_index = slave | 0x80;
+
+	} else if (MLX4_QP_ST_RC == ts || MLX4_QP_ST_XRC == ts || MLX4_QP_ST_UC == ts) {
+		if (optpar & MLX4_QP_OPTPAR_PRIMARY_ADDR_PATH) {
+			port = (qp_ctx->pri_path.sched_queue >> 6 & 1) + 1;
+			if (mlx4_is_eth(dev, port)) {
+				qp_ctx->pri_path.mgid_index += mlx4_get_base_gid_ix(dev, slave);
+				qp_ctx->pri_path.mgid_index &= 0x7f;
+			} else {
+				qp_ctx->pri_path.mgid_index = slave & 0x7F;
+			}
+		}
+		if (optpar & MLX4_QP_OPTPAR_ALT_ADDR_PATH) {
+			port = (qp_ctx->alt_path.sched_queue >> 6 & 1) + 1;
+			if (mlx4_is_eth(dev, port)) {
+				qp_ctx->alt_path.mgid_index += mlx4_get_base_gid_ix(dev, slave);
+				qp_ctx->alt_path.mgid_index &= 0x7f;
+			} else {
+				qp_ctx->alt_path.mgid_index = slave & 0x7F;
+			}
+		}
 	}
 }
 
@@ -2734,6 +2758,8 @@ static int verify_qp_parameters(struct mlx4_dev *dev,
 	u32			qp_type;
 	struct mlx4_qp_context	*qp_ctx;
 	enum mlx4_qp_optpar	optpar;
+	int port;
+	int num_gids;
 
 	qp_ctx  = inbox->buf + 8;
 	qp_type	= (be32_to_cpu(qp_ctx->flags) >> 16) & 0xff;
@@ -2741,6 +2767,7 @@ static int verify_qp_parameters(struct mlx4_dev *dev,
 
 	switch (qp_type) {
 	case MLX4_QP_ST_RC:
+	case MLX4_QP_ST_XRC:
 	case MLX4_QP_ST_UC:
 		switch (transition) {
 		case QP_TRANS_INIT2RTR:
@@ -2749,13 +2776,24 @@ static int verify_qp_parameters(struct mlx4_dev *dev,
 		case QP_TRANS_SQD2SQD:
 		case QP_TRANS_SQD2RTS:
 			if (slave != mlx4_master_func_num(dev))
-				/* slaves have only gid index 0 */
-				if (optpar & MLX4_QP_OPTPAR_PRIMARY_ADDR_PATH)
-					if (qp_ctx->pri_path.mgid_index)
+				if (optpar & MLX4_QP_OPTPAR_PRIMARY_ADDR_PATH) {
+					port = (qp_ctx->pri_path.sched_queue >> 6 & 1) + 1;
+					if (dev->caps.port_mask[port] != MLX4_PORT_TYPE_IB)
+						num_gids = mlx4_get_slave_num_gids(dev, slave);
+					else
+						num_gids = 1;
+					if (qp_ctx->pri_path.mgid_index >= num_gids)
 						return -EINVAL;
-				if (optpar & MLX4_QP_OPTPAR_ALT_ADDR_PATH)
-					if (qp_ctx->alt_path.mgid_index)
+				}
+				if (optpar & MLX4_QP_OPTPAR_ALT_ADDR_PATH) {
+					port = (qp_ctx->alt_path.sched_queue >> 6 & 1) + 1;
+					if (dev->caps.port_mask[port] != MLX4_PORT_TYPE_IB)
+						num_gids = mlx4_get_slave_num_gids(dev, slave);
+					else
+						num_gids = 1;
+					if (qp_ctx->alt_path.mgid_index >= num_gids)
 						return -EINVAL;
+				}
 			break;
 		default:
 			break;
-- 
cgit v1.2.2


From 2f5bb473681b88819a9de28ac3a47e7737815a92 Mon Sep 17 00:00:00 2001
From: Jack Morgenstein <jackm@dev.mellanox.co.il>
Date: Wed, 12 Mar 2014 12:00:40 +0200
Subject: mlx4: Add ref counting to port MAC table for RoCE

The IB side of RoCE requires the MAC table index of the
MAC address used by its QPs.

To obtain the real MAC index, the IB side registers the
MAC (increasing its ref count, and also returning the
real MAC index) during the modify-qp sequence.

This protects against the ETH side deleting or modifying
that MAC table entry while the QP is active.

Note that until the modify-qp command returns success,
the MAC and VLAN information only has "candidate" status.
If the modify-qp succeeds, the "candidate" info is promoted
to the operational MAC/VLAN info for the qp. If the modify fails,
the candidate MAC/VLAN is unregistered, and the old qp info
is preserved.

The patch is a bit complex, because there are multiple qp
transitions where the primary-path information may be
modified:  INIT-to-RTR, and SQD-to-SQD.

Similarly for the alternate path information.

Therefore the code must handle cases where path information
has already been entered into the QP context by previous
qp transitions.

For the MAC address, the success logic is as follows:
1. If there was no previous MAC, simply move the candidate
   MAC information to the operational information, and reset
   the candidate MAC info.
2. If there was a previous MAC, unregister it.  Then move
   the MAC information from candidate to operational, and
   reset the candidate info (as in 1. above).

The MAC address failure logic is the same for all cases:
 - Unregister the candidate MAC, and reset the candidate MAC info.

For Vlan registration, the logic is similar.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 .../net/ethernet/mellanox/mlx4/resource_tracker.c  | 75 ++++++++++++++++++++--
 1 file changed, 68 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
index 1c3634eab5e1..706a6d2b538c 100644
--- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
+++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
@@ -52,6 +52,8 @@
 struct mac_res {
 	struct list_head list;
 	u64 mac;
+	int ref_count;
+	u8 smac_index;
 	u8 port;
 };
 
@@ -1683,11 +1685,39 @@ static int srq_alloc_res(struct mlx4_dev *dev, int slave, int op, int cmd,
 	return err;
 }
 
-static int mac_add_to_slave(struct mlx4_dev *dev, int slave, u64 mac, int port)
+static int mac_find_smac_ix_in_slave(struct mlx4_dev *dev, int slave, int port,
+				     u8 smac_index, u64 *mac)
+{
+	struct mlx4_priv *priv = mlx4_priv(dev);
+	struct mlx4_resource_tracker *tracker = &priv->mfunc.master.res_tracker;
+	struct list_head *mac_list =
+		&tracker->slave_list[slave].res_list[RES_MAC];
+	struct mac_res *res, *tmp;
+
+	list_for_each_entry_safe(res, tmp, mac_list, list) {
+		if (res->smac_index == smac_index && res->port == (u8) port) {
+			*mac = res->mac;
+			return 0;
+		}
+	}
+	return -ENOENT;
+}
+
+static int mac_add_to_slave(struct mlx4_dev *dev, int slave, u64 mac, int port, u8 smac_index)
 {
 	struct mlx4_priv *priv = mlx4_priv(dev);
 	struct mlx4_resource_tracker *tracker = &priv->mfunc.master.res_tracker;
-	struct mac_res *res;
+	struct list_head *mac_list =
+		&tracker->slave_list[slave].res_list[RES_MAC];
+	struct mac_res *res, *tmp;
+
+	list_for_each_entry_safe(res, tmp, mac_list, list) {
+		if (res->mac == mac && res->port == (u8) port) {
+			/* mac found. update ref count */
+			++res->ref_count;
+			return 0;
+		}
+	}
 
 	if (mlx4_grant_resource(dev, slave, RES_MAC, 1, port))
 		return -EINVAL;
@@ -1698,6 +1728,8 @@ static int mac_add_to_slave(struct mlx4_dev *dev, int slave, u64 mac, int port)
 	}
 	res->mac = mac;
 	res->port = (u8) port;
+	res->smac_index = smac_index;
+	res->ref_count = 1;
 	list_add_tail(&res->list,
 		      &tracker->slave_list[slave].res_list[RES_MAC]);
 	return 0;
@@ -1714,9 +1746,11 @@ static void mac_del_from_slave(struct mlx4_dev *dev, int slave, u64 mac,
 
 	list_for_each_entry_safe(res, tmp, mac_list, list) {
 		if (res->mac == mac && res->port == (u8) port) {
-			list_del(&res->list);
-			mlx4_release_resource(dev, slave, RES_MAC, 1, port);
-			kfree(res);
+			if (!--res->ref_count) {
+				list_del(&res->list);
+				mlx4_release_resource(dev, slave, RES_MAC, 1, port);
+				kfree(res);
+			}
 			break;
 		}
 	}
@@ -1729,10 +1763,13 @@ static void rem_slave_macs(struct mlx4_dev *dev, int slave)
 	struct list_head *mac_list =
 		&tracker->slave_list[slave].res_list[RES_MAC];
 	struct mac_res *res, *tmp;
+	int i;
 
 	list_for_each_entry_safe(res, tmp, mac_list, list) {
 		list_del(&res->list);
-		__mlx4_unregister_mac(dev, res->port, res->mac);
+		/* dereference the mac the num times the slave referenced it */
+		for (i = 0; i < res->ref_count; i++)
+			__mlx4_unregister_mac(dev, res->port, res->mac);
 		mlx4_release_resource(dev, slave, RES_MAC, 1, res->port);
 		kfree(res);
 	}
@@ -1744,6 +1781,7 @@ static int mac_alloc_res(struct mlx4_dev *dev, int slave, int op, int cmd,
 	int err = -EINVAL;
 	int port;
 	u64 mac;
+	u8 smac_index;
 
 	if (op != RES_OP_RESERVE_AND_MAP)
 		return err;
@@ -1753,12 +1791,13 @@ static int mac_alloc_res(struct mlx4_dev *dev, int slave, int op, int cmd,
 
 	err = __mlx4_register_mac(dev, port, mac);
 	if (err >= 0) {
+		smac_index = err;
 		set_param_l(out_param, err);
 		err = 0;
 	}
 
 	if (!err) {
-		err = mac_add_to_slave(dev, slave, mac, port);
+		err = mac_add_to_slave(dev, slave, mac, port, smac_index);
 		if (err)
 			__mlx4_unregister_mac(dev, port, mac);
 	}
@@ -3306,6 +3345,25 @@ int mlx4_INIT2INIT_QP_wrapper(struct mlx4_dev *dev, int slave,
 	return mlx4_GEN_QP_wrapper(dev, slave, vhcr, inbox, outbox, cmd);
 }
 
+static int roce_verify_mac(struct mlx4_dev *dev, int slave,
+				struct mlx4_qp_context *qpc,
+				struct mlx4_cmd_mailbox *inbox)
+{
+	u64 mac;
+	int port;
+	u32 ts = (be32_to_cpu(qpc->flags) >> 16) & 0xff;
+	u8 sched = *(u8 *)(inbox->buf + 64);
+	u8 smac_ix;
+
+	port = (sched >> 6 & 1) + 1;
+	if (mlx4_is_eth(dev, port) && (ts != MLX4_QP_ST_MLX)) {
+		smac_ix = qpc->pri_path.grh_mylmc & 0x7f;
+		if (mac_find_smac_ix_in_slave(dev, slave, port, smac_ix, &mac))
+			return -ENOENT;
+	}
+	return 0;
+}
+
 int mlx4_INIT2RTR_QP_wrapper(struct mlx4_dev *dev, int slave,
 			     struct mlx4_vhcr *vhcr,
 			     struct mlx4_cmd_mailbox *inbox,
@@ -3328,6 +3386,9 @@ int mlx4_INIT2RTR_QP_wrapper(struct mlx4_dev *dev, int slave,
 	if (err)
 		return err;
 
+	if (roce_verify_mac(dev, slave, qpc, inbox))
+		return -EINVAL;
+
 	update_pkey_index(dev, slave, inbox);
 	update_gid(dev, inbox, (u8)slave);
 	adjust_proxy_tun_qkey(dev, vhcr, qpc);
-- 
cgit v1.2.2


From 5ea8bbfc49291b7e23161fe4de0bf3e4a4e34b18 Mon Sep 17 00:00:00 2001
From: Jack Morgenstein <jackm@dev.mellanox.co.il>
Date: Wed, 12 Mar 2014 12:00:41 +0200
Subject: mlx4: Implement IP based gids support for RoCE/SRIOV

Since there is no connection between the MAC/VLAN and the GID
when using IP-based addressing, the proxy QP1 (running on the
slave) must pass the source-mac, destination-mac, and vlan_id
information separately from the GID. Additionally, the Host
must pass the remote source-mac and vlan_id back to the slave,

This is achieved as follows:
Outgoing MADs:
    1. Source MAC: obtained from the CQ completion structure
       (struct ib_wc, smac field).
    2. Destination MAC: obtained from the tunnel header
    3. vlan_id: obtained from the tunnel header.
Incoming MADs
    1. The source (i.e., remote) MAC and vlan_id are passed in
       the tunnel header to the proxy QP1.

VST mode support:
     For outgoing MADs,  the vlan_id obtained from the header is
        discarded, and the vlan_id specified by the Hypervisor is used
        instead.
     For incoming MADs, the incoming vlan_id (in the wc) is discarded, and the
        "invalid" vlan (0xffff)  is substituted when forwarding to the slave.

Signed-off-by: Moni Shoua <monis@mellanox.co.il>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/mellanox/mlx4/cmd.c | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/mellanox/mlx4/cmd.c b/drivers/net/ethernet/mellanox/mlx4/cmd.c
index 0d02fba94536..2b0b45ece14b 100644
--- a/drivers/net/ethernet/mellanox/mlx4/cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx4/cmd.c
@@ -2289,6 +2289,30 @@ int mlx4_set_vf_vlan(struct mlx4_dev *dev, int port, int vf, u16 vlan, u8 qos)
 }
 EXPORT_SYMBOL_GPL(mlx4_set_vf_vlan);
 
+ /* mlx4_get_slave_default_vlan -
+ * return true if VST ( default vlan)
+ * if VST, will return vlan & qos (if not NULL)
+ */
+bool mlx4_get_slave_default_vlan(struct mlx4_dev *dev, int port, int slave,
+				 u16 *vlan, u8 *qos)
+{
+	struct mlx4_vport_oper_state *vp_oper;
+	struct mlx4_priv *priv;
+
+	priv = mlx4_priv(dev);
+	vp_oper = &priv->mfunc.master.vf_oper[slave].vport[port];
+
+	if (MLX4_VGT != vp_oper->state.default_vlan) {
+		if (vlan)
+			*vlan = vp_oper->state.default_vlan;
+		if (qos)
+			*qos = vp_oper->state.default_qos;
+		return true;
+	}
+	return false;
+}
+EXPORT_SYMBOL_GPL(mlx4_get_slave_default_vlan);
+
 int mlx4_set_vf_spoofchk(struct mlx4_dev *dev, int port, int vf, bool setting)
 {
 	struct mlx4_priv *priv = mlx4_priv(dev);
-- 
cgit v1.2.2


From aa9a2d51a3e70b15a898bec7dde3ce5726fec641 Mon Sep 17 00:00:00 2001
From: Jack Morgenstein <jackm@dev.mellanox.co.il>
Date: Wed, 12 Mar 2014 12:00:43 +0200
Subject: mlx4: Activate RoCE/SRIOV

To activate RoCE/SRIOV, need to remove the following:
1. In mlx4_ib_add, need to remove the error return preventing
   initialization of a RoCE port under SRIOV.
2. In update_vport_qp_params (in resource_tracker.c) need to remove
   the error return when a RoCE RC or UD qp is detected.
   This error return causes the INIT-to-RTR qp transition to fail
   in the wrapper function under RoCE/SRIOV.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/mellanox/mlx4/resource_tracker.c | 7 -------
 1 file changed, 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
index 706a6d2b538c..74e490d70184 100644
--- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
+++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
@@ -645,7 +645,6 @@ static int update_vport_qp_param(struct mlx4_dev *dev,
 	struct mlx4_qp_context	*qpc = inbox->buf + 8;
 	struct mlx4_vport_oper_state *vp_oper;
 	struct mlx4_priv *priv;
-	u32 qp_type;
 	int port;
 
 	port = (qpc->pri_path.sched_queue & 0x40) ? 2 : 1;
@@ -653,12 +652,6 @@ static int update_vport_qp_param(struct mlx4_dev *dev,
 	vp_oper = &priv->mfunc.master.vf_oper[slave].vport[port];
 
 	if (MLX4_VGT != vp_oper->state.default_vlan) {
-		qp_type	= (be32_to_cpu(qpc->flags) >> 16) & 0xff;
-		if (MLX4_QP_ST_RC == qp_type ||
-		    (MLX4_QP_ST_UD == qp_type &&
-		     !mlx4_is_qp_reserved(dev, qpn)))
-			return -EINVAL;
-
 		/* the reserved QPs (special, proxy, tunnel)
 		 * do not operate over vlans
 		 */
-- 
cgit v1.2.2


From ecf1f6e1df385d17b9cdebd06edf4d1f00d217a7 Mon Sep 17 00:00:00 2001
From: Suresh Reddy <suresh.reddy@emulex.com>
Date: Tue, 11 Mar 2014 18:53:03 +0530
Subject: be2net: Use GET_PROFILE_CONFIG cmd for BE3-R to query max-vfs

Use GET_PROFILE_CONFIG_V1 cmd even for BE3-R (it's already used for
Lancer-R and Skyhawk-R), to query max-vfs value supported by the FW.
This is needed as on some configs, the value exported in the PCI-config
space is not accurate.

Signed-off-by: Suresh Reddy <suresh.reddy@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/emulex/benet/be_main.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 6e10230a2ee0..5ba1ea5ec43d 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -3150,13 +3150,16 @@ static void BEx_get_resources(struct be_adapter *adapter,
 {
 	struct pci_dev *pdev = adapter->pdev;
 	bool use_sriov = false;
-	int max_vfs;
-
-	max_vfs = pci_sriov_get_totalvfs(pdev);
-
-	if (BE3_chip(adapter) && sriov_want(adapter)) {
-		res->max_vfs = max_vfs > 0 ? min(MAX_VFS, max_vfs) : 0;
-		use_sriov = res->max_vfs;
+	int max_vfs = 0;
+
+	if (be_physfn(adapter) && BE3_chip(adapter)) {
+		be_cmd_get_profile_config(adapter, res, 0);
+		/* Some old versions of BE3 FW don't report max_vfs value */
+		if (res->max_vfs == 0) {
+			max_vfs = pci_sriov_get_totalvfs(pdev);
+			res->max_vfs = max_vfs > 0 ? min(MAX_VFS, max_vfs) : 0;
+		}
+		use_sriov = res->max_vfs && sriov_want(adapter);
 	}
 
 	if (be_physfn(adapter))
@@ -3197,7 +3200,7 @@ static void BEx_get_resources(struct be_adapter *adapter,
 	res->max_rx_qs = res->max_rss_qs + 1;
 
 	if (be_physfn(adapter))
-		res->max_evt_qs = (max_vfs > 0) ?
+		res->max_evt_qs = (res->max_vfs > 0) ?
 					BE3_SRIOV_MAX_EVT_QS : BE3_MAX_EVT_QS;
 	else
 		res->max_evt_qs = 1;
-- 
cgit v1.2.2


From bdce2ad7964b22c5dbccfa151bb5cbab8f510a99 Mon Sep 17 00:00:00 2001
From: Suresh Reddy <suresh.reddy@emulex.com>
Date: Tue, 11 Mar 2014 18:53:04 +0530
Subject: be2net: Add link state control for VFs

Add support to control VF's link state by implementing the
ndo_set_vf_link_state() hook.

Signed-off-by: Suresh Reddy <suresh.reddy@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/emulex/benet/be.h      |  1 +
 drivers/net/ethernet/emulex/benet/be_cmds.c | 50 +++++++++++++++++++++++++++--
 drivers/net/ethernet/emulex/benet/be_cmds.h | 10 ++++++
 drivers/net/ethernet/emulex/benet/be_main.c | 32 ++++++++++++++++--
 4 files changed, 88 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h
index a91267be715a..d08c7074f99b 100644
--- a/drivers/net/ethernet/emulex/benet/be.h
+++ b/drivers/net/ethernet/emulex/benet/be.h
@@ -359,6 +359,7 @@ struct be_vf_cfg {
 	int pmac_id;
 	u16 vlan_tag;
 	u32 tx_rate;
+	u32 plink_tracking;
 };
 
 enum vf_state {
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c
index 72bde5d1c358..ff353d7c3fdf 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.c
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.c
@@ -202,8 +202,12 @@ static void be_async_link_state_process(struct be_adapter *adapter,
 	/* When link status changes, link speed must be re-queried from FW */
 	adapter->phy.link_speed = -1;
 
-	/* Ignore physical link event */
-	if (lancer_chip(adapter) &&
+	/* On BEx the FW does not send a separate link status
+	 * notification for physical and logical link.
+	 * On other chips just process the logical link
+	 * status notification
+	 */
+	if (!BEx_chip(adapter) &&
 	    !(evt->port_link_status & LOGICAL_LINK_STATUS_MASK))
 		return;
 
@@ -211,7 +215,8 @@ static void be_async_link_state_process(struct be_adapter *adapter,
 	 * it may not be received in some cases.
 	 */
 	if (adapter->flags & BE_FLAGS_LINK_STATUS_INIT)
-		be_link_status_update(adapter, evt->port_link_status);
+		be_link_status_update(adapter,
+				      evt->port_link_status & LINK_STATUS_MASK);
 }
 
 /* Grp5 CoS Priority evt */
@@ -3743,6 +3748,45 @@ err:
 	return status;
 }
 
+int be_cmd_set_logical_link_config(struct be_adapter *adapter,
+				   int link_state, u8 domain)
+{
+	struct be_mcc_wrb *wrb;
+	struct be_cmd_req_set_ll_link *req;
+	int status;
+
+	if (BEx_chip(adapter) || lancer_chip(adapter))
+		return 0;
+
+	spin_lock_bh(&adapter->mcc_lock);
+
+	wrb = wrb_from_mccq(adapter);
+	if (!wrb) {
+		status = -EBUSY;
+		goto err;
+	}
+
+	req = embedded_payload(wrb);
+
+	be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+			       OPCODE_COMMON_SET_LOGICAL_LINK_CONFIG,
+			       sizeof(*req), wrb, NULL);
+
+	req->hdr.version = 1;
+	req->hdr.domain = domain;
+
+	if (link_state == IFLA_VF_LINK_STATE_ENABLE)
+		req->link_config |= 1;
+
+	if (link_state == IFLA_VF_LINK_STATE_AUTO)
+		req->link_config |= 1 << PLINK_TRACK_SHIFT;
+
+	status = be_mcc_notify_wait(adapter);
+err:
+	spin_unlock_bh(&adapter->mcc_lock);
+	return status;
+}
+
 int be_roce_mcc_cmd(void *netdev_handle, void *wrb_payload,
 			int wrb_payload_size, u16 *cmd_status, u16 *ext_status)
 {
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.h b/drivers/net/ethernet/emulex/benet/be_cmds.h
index d0ab980f77ea..fda3e8851e17 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.h
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.h
@@ -203,6 +203,7 @@ struct be_mcc_mailbox {
 #define OPCODE_COMMON_GET_BEACON_STATE			70
 #define OPCODE_COMMON_READ_TRANSRECV_DATA		73
 #define OPCODE_COMMON_GET_PORT_NAME			77
+#define OPCODE_COMMON_SET_LOGICAL_LINK_CONFIG		80
 #define OPCODE_COMMON_SET_INTERRUPT_ENABLE		89
 #define OPCODE_COMMON_SET_FN_PRIVILEGES			100
 #define OPCODE_COMMON_GET_PHY_DETAILS			102
@@ -1991,6 +1992,13 @@ struct be_cmd_resp_get_iface_list {
 	struct be_if_desc if_desc;
 };
 
+/*************** Set logical link ********************/
+#define PLINK_TRACK_SHIFT	8
+struct be_cmd_req_set_ll_link {
+	struct be_cmd_req_hdr hdr;
+	u32 link_config; /* Bit 0: UP_DOWN, Bit 9: PLINK */
+};
+
 int be_pci_fnum_get(struct be_adapter *adapter);
 int be_fw_wait_ready(struct be_adapter *adapter);
 int be_cmd_mac_addr_query(struct be_adapter *adapter, u8 *mac_addr,
@@ -2112,3 +2120,5 @@ int be_cmd_get_if_id(struct be_adapter *adapter, struct be_vf_cfg *vf_cfg,
 		     int vf_num);
 int be_cmd_enable_vf(struct be_adapter *adapter, u8 domain);
 int be_cmd_intr_set(struct be_adapter *adapter, bool intr_enable);
+int be_cmd_set_logical_link_config(struct be_adapter *adapter,
+					  int link_state, u8 domain);
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 5ba1ea5ec43d..2f02bcbf3164 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -652,7 +652,7 @@ void be_link_status_update(struct be_adapter *adapter, u8 link_status)
 		adapter->flags |= BE_FLAGS_LINK_STATUS_INIT;
 	}
 
-	if ((link_status & LINK_STATUS_MASK) == LINK_UP)
+	if (link_status)
 		netif_carrier_on(netdev);
 	else
 		netif_carrier_off(netdev);
@@ -1288,6 +1288,7 @@ static int be_get_vf_config(struct net_device *netdev, int vf,
 	vi->vlan = vf_cfg->vlan_tag & VLAN_VID_MASK;
 	vi->qos = vf_cfg->vlan_tag >> VLAN_PRIO_SHIFT;
 	memcpy(&vi->mac, vf_cfg->mac_addr, ETH_ALEN);
+	vi->linkstate = adapter->vf_cfg[vf].plink_tracking;
 
 	return 0;
 }
@@ -1354,6 +1355,24 @@ static int be_set_vf_tx_rate(struct net_device *netdev,
 		adapter->vf_cfg[vf].tx_rate = rate;
 	return status;
 }
+static int be_set_vf_link_state(struct net_device *netdev, int vf,
+				int link_state)
+{
+	struct be_adapter *adapter = netdev_priv(netdev);
+	int status;
+
+	if (!sriov_enabled(adapter))
+		return -EPERM;
+
+	if (vf >= adapter->num_vfs)
+		return -EINVAL;
+
+	status = be_cmd_set_logical_link_config(adapter, link_state, vf+1);
+	if (!status)
+		adapter->vf_cfg[vf].plink_tracking = link_state;
+
+	return status;
+}
 
 static void be_aic_update(struct be_aic_obj *aic, u64 rx_pkts, u64 tx_pkts,
 			  ulong now)
@@ -3109,8 +3128,12 @@ static int be_vf_setup(struct be_adapter *adapter)
 		if (!status)
 			vf_cfg->tx_rate = lnk_speed;
 
-		if (!old_vfs)
+		if (!old_vfs) {
 			be_cmd_enable_vf(adapter, vf + 1);
+			be_cmd_set_logical_link_config(adapter,
+						       IFLA_VF_LINK_STATE_AUTO,
+						       vf+1);
+		}
 	}
 
 	if (!old_vfs) {
@@ -3467,6 +3490,10 @@ static int be_setup(struct be_adapter *adapter)
 		be_cmd_set_flow_control(adapter, adapter->tx_fc,
 					adapter->rx_fc);
 
+	if (be_physfn(adapter))
+		be_cmd_set_logical_link_config(adapter,
+					       IFLA_VF_LINK_STATE_AUTO, 0);
+
 	if (sriov_want(adapter)) {
 		if (be_max_vfs(adapter))
 			be_vf_setup(adapter);
@@ -4106,6 +4133,7 @@ static const struct net_device_ops be_netdev_ops = {
 	.ndo_set_vf_vlan	= be_set_vf_vlan,
 	.ndo_set_vf_tx_rate	= be_set_vf_tx_rate,
 	.ndo_get_vf_config	= be_get_vf_config,
+	.ndo_set_vf_link_state  = be_set_vf_link_state,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= be_netpoll,
 #endif
-- 
cgit v1.2.2


From bdac85b55e57ca880147a4c6bd9f8af69507956a Mon Sep 17 00:00:00 2001
From: Ravikumar Nelavelli <ravikumar.nelavelli@emulex.com>
Date: Tue, 11 Mar 2014 18:53:05 +0530
Subject: be2net: log LPVID used in multi-channel configs

Signed-off-by: Ravikumar Nelavelli <ravikumar.nelavelli@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/emulex/benet/be_cmds.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c
index ff353d7c3fdf..cf5afe72f12f 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.c
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.c
@@ -244,10 +244,12 @@ static void be_async_grp5_qos_speed_process(struct be_adapter *adapter,
 static void be_async_grp5_pvid_state_process(struct be_adapter *adapter,
 		struct be_async_event_grp5_pvid_state *evt)
 {
-	if (evt->enabled)
+	if (evt->enabled) {
 		adapter->pvid = le16_to_cpu(evt->tag) & VLAN_VID_MASK;
-	else
+		dev_info(&adapter->pdev->dev, "LPVID: %d\n", adapter->pvid);
+	} else {
 		adapter->pvid = 0;
+	}
 }
 
 static void be_async_grp5_evt_process(struct be_adapter *adapter,
-- 
cgit v1.2.2


From 46ee9c143211231d5d81840b28d1b869c0860aa7 Mon Sep 17 00:00:00 2001
From: Ravikumar Nelavelli <ravikumar.nelavelli@emulex.com>
Date: Tue, 11 Mar 2014 18:53:06 +0530
Subject: be2net: fix pmac_id[] allocation size

The allocation size must be be_max_uc() and not "be_max_uc() + 1"
Signed-off-by: Ravikumar Nelavelli <ravikumar.nelavelli@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/emulex/benet/be_main.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 2f02bcbf3164..eaf08917f341 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -3314,9 +3314,8 @@ static int be_get_config(struct be_adapter *adapter)
 	if (status)
 		return status;
 
-	/* primary mac needs 1 pmac entry */
-	adapter->pmac_id = kcalloc(be_max_uc(adapter) + 1, sizeof(u32),
-				   GFP_KERNEL);
+	adapter->pmac_id = kcalloc(be_max_uc(adapter),
+				   sizeof(*adapter->pmac_id), GFP_KERNEL);
 	if (!adapter->pmac_id)
 		return -ENOMEM;
 
-- 
cgit v1.2.2


From a5243dabb95c51a4b2dce3f7e4f3ced57d2c5742 Mon Sep 17 00:00:00 2001
From: Vasundhara Volam <vasundhara.volam@emulex.com>
Date: Tue, 11 Mar 2014 18:53:07 +0530
Subject: be2net: Create multiple TXQs on RSS capable multi-channel BE3-R
 interfaces

Currently the driver creates only a single TXQ on any BE3-R multi-channel
interface.
This patch changes this and creates multiple TXQs on RSS-capable multi-channel
BE3-R interfaces. This change helps improve the TX pps performance on the
affected interface.

Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/emulex/benet/be_main.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index eaf08917f341..fc44bb331717 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -3209,9 +3209,13 @@ static void BEx_get_resources(struct be_adapter *adapter,
 
 	res->max_mcast_mac = BE_MAX_MC;
 
-	/* For BE3 1Gb ports, F/W does not properly support multiple TXQs */
-	if (BE2_chip(adapter) || use_sriov || be_is_mc(adapter) ||
-	    !be_physfn(adapter) || (adapter->port_num > 1))
+	/* 1) For BE3 1Gb ports, FW does not support multiple TXQs
+	 * 2) Create multiple TX rings on a BE3-R multi-channel interface
+	 *    *only* if it is RSS-capable.
+	 */
+	if (BE2_chip(adapter) || use_sriov ||  (adapter->port_num > 1) ||
+	    !be_physfn(adapter) || (be_is_mc(adapter) &&
+	    !(adapter->function_caps & BE_FUNCTION_CAPS_RSS)))
 		res->max_tx_qs = 1;
 	else
 		res->max_tx_qs = BE3_MAX_TX_QS;
-- 
cgit v1.2.2


From 48291c22b75adbbd15227070088c761c04e48a3b Mon Sep 17 00:00:00 2001
From: Vasundhara Volam <vasundhara.volam@emulex.com>
Date: Tue, 11 Mar 2014 18:53:08 +0530
Subject: be2net: Fix vlans_added counter

When a VLAN is added by user, adapter->vlans_added is incremented.
But if the VLAN is already programmed in HW, driver ends up
incrementing the counter wrongly.

Increment the counter only if VLAN is not already programmed in the HW.

Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/emulex/benet/be_main.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index fc44bb331717..41736937e040 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -1138,7 +1138,10 @@ static int be_vlan_add_vid(struct net_device *netdev, __be16 proto, u16 vid)
 
 	/* Packets with VID 0 are always received by Lancer by default */
 	if (lancer_chip(adapter) && vid == 0)
-		goto ret;
+		return status;
+
+	if (adapter->vlan_tag[vid])
+		return status;
 
 	adapter->vlan_tag[vid] = 1;
 	adapter->vlans_added++;
@@ -1148,7 +1151,7 @@ static int be_vlan_add_vid(struct net_device *netdev, __be16 proto, u16 vid)
 		adapter->vlans_added--;
 		adapter->vlan_tag[vid] = 0;
 	}
-ret:
+
 	return status;
 }
 
-- 
cgit v1.2.2


From d52afde96ffda8c9d3f0e32ffe87b6cc3290580e Mon Sep 17 00:00:00 2001
From: Sathya Perla <sathya.perla@emulex.com>
Date: Tue, 11 Mar 2014 18:53:09 +0530
Subject: be2net: update driver version to 10.2

Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/emulex/benet/be.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h
index d08c7074f99b..a587c8aa27ed 100644
--- a/drivers/net/ethernet/emulex/benet/be.h
+++ b/drivers/net/ethernet/emulex/benet/be.h
@@ -34,7 +34,7 @@
 #include "be_hw.h"
 #include "be_roce.h"
 
-#define DRV_VER			"10.0.600.0u"
+#define DRV_VER			"10.2u"
 #define DRV_NAME		"be2net"
 #define BE_NAME			"Emulex BladeEngine2"
 #define BE3_NAME		"Emulex BladeEngine3"
-- 
cgit v1.2.2


From 508f81d517ed1f3f0197df63ea7ab5cd91b6f3b3 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Tue, 11 Mar 2014 14:14:58 -0700
Subject: 8139cp: Call dev_kfree_skby_any instead of kfree_skb.

Replace kfree_skb with dev_kfree_skb_any in cp_start_xmit
as it can be called in both hard irq and other contexts.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/realtek/8139cp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/realtek/8139cp.c b/drivers/net/ethernet/realtek/8139cp.c
index 737c1a881f78..a3c1daa7ad5c 100644
--- a/drivers/net/ethernet/realtek/8139cp.c
+++ b/drivers/net/ethernet/realtek/8139cp.c
@@ -899,7 +899,7 @@ out_unlock:
 
 	return NETDEV_TX_OK;
 out_dma_error:
-	kfree_skb(skb);
+	dev_kfree_skb_any(skb);
 	cp->dev->stats.tx_dropped++;
 	goto out_unlock;
 }
-- 
cgit v1.2.2


From a2ccd2e4bd70122523a7bf21cec4dd6e34427089 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Tue, 11 Mar 2014 14:15:36 -0700
Subject: 8139too: Call dev_kfree_skby_any instead of dev_kfree_skb.

Replace dev_kfree_skb with dev_kfree_skb_any in functions that can
be called in hard irq and other contexts.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/realtek/8139too.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/realtek/8139too.c b/drivers/net/ethernet/realtek/8139too.c
index da5972eefdd2..8cb2f357026e 100644
--- a/drivers/net/ethernet/realtek/8139too.c
+++ b/drivers/net/ethernet/realtek/8139too.c
@@ -1717,9 +1717,9 @@ static netdev_tx_t rtl8139_start_xmit (struct sk_buff *skb,
 		if (len < ETH_ZLEN)
 			memset(tp->tx_buf[entry], 0, ETH_ZLEN);
 		skb_copy_and_csum_dev(skb, tp->tx_buf[entry]);
-		dev_kfree_skb(skb);
+		dev_kfree_skb_any(skb);
 	} else {
-		dev_kfree_skb(skb);
+		dev_kfree_skb_any(skb);
 		dev->stats.tx_dropped++;
 		return NETDEV_TX_OK;
 	}
-- 
cgit v1.2.2


From 989c9ba104d9ce53c1ca918262f3fdfb33aca12a Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Tue, 11 Mar 2014 14:16:14 -0700
Subject: r8169: Call dev_kfree_skby_any instead of dev_kfree_skb.

Replace dev_kfree_skb with dev_kfree_skb_any in functions that can
be called in hard irq and other contexts.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/realtek/r8169.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index e9779653cd4c..cf947337e0d6 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -5834,7 +5834,7 @@ static void rtl8169_tx_clear_range(struct rtl8169_private *tp, u32 start,
 					     tp->TxDescArray + entry);
 			if (skb) {
 				tp->dev->stats.tx_dropped++;
-				dev_kfree_skb(skb);
+				dev_kfree_skb_any(skb);
 				tx_skb->skb = NULL;
 			}
 		}
@@ -6059,7 +6059,7 @@ static netdev_tx_t rtl8169_start_xmit(struct sk_buff *skb,
 err_dma_1:
 	rtl8169_unmap_tx_skb(d, tp->tx_skb + entry, txd);
 err_dma_0:
-	dev_kfree_skb(skb);
+	dev_kfree_skb_any(skb);
 err_update_stats:
 	dev->stats.tx_dropped++;
 	return NETDEV_TX_OK;
@@ -6142,7 +6142,7 @@ static void rtl_tx(struct net_device *dev, struct rtl8169_private *tp)
 			tp->tx_stats.packets++;
 			tp->tx_stats.bytes += tx_skb->skb->len;
 			u64_stats_update_end(&tp->tx_stats.syncp);
-			dev_kfree_skb(tx_skb->skb);
+			dev_kfree_skb_any(tx_skb->skb);
 			tx_skb->skb = NULL;
 		}
 		dirty_tx++;
-- 
cgit v1.2.2


From 2bb77ab42a6a40162a367b80394b96bb756ad5f1 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Tue, 11 Mar 2014 14:16:58 -0700
Subject: bonding: Call dev_kfree_skby_any instead of kfree_skb.

Replace kfree_skb with dev_kfree_skb_any in functions that can
be called in hard irq and other contexts.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_3ad.c  |  2 +-
 drivers/net/bonding/bond_alb.c  |  2 +-
 drivers/net/bonding/bond_main.c | 10 +++++-----
 3 files changed, 7 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index a2ef3f72de88..dee2a84a2929 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -2479,7 +2479,7 @@ out:
 	return NETDEV_TX_OK;
 err_free:
 	/* no suitable interface, frame not sent */
-	kfree_skb(skb);
+	dev_kfree_skb_any(skb);
 	goto out;
 }
 
diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index aaeeacf767f2..9cf836b67b15 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -1464,7 +1464,7 @@ int bond_alb_xmit(struct sk_buff *skb, struct net_device *bond_dev)
 	}
 
 	/* no suitable interface, frame not sent */
-	kfree_skb(skb);
+	dev_kfree_skb_any(skb);
 out:
 	return NETDEV_TX_OK;
 }
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 324389b44915..e717db301d46 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -3548,7 +3548,7 @@ static void bond_xmit_slave_id(struct bonding *bond, struct sk_buff *skb, int sl
 		}
 	}
 	/* no slave that can tx has been found */
-	kfree_skb(skb);
+	dev_kfree_skb_any(skb);
 }
 
 /**
@@ -3624,7 +3624,7 @@ static int bond_xmit_activebackup(struct sk_buff *skb, struct net_device *bond_d
 	if (slave)
 		bond_dev_queue_xmit(bond, skb, slave->dev);
 	else
-		kfree_skb(skb);
+		dev_kfree_skb_any(skb);
 
 	return NETDEV_TX_OK;
 }
@@ -3667,7 +3667,7 @@ static int bond_xmit_broadcast(struct sk_buff *skb, struct net_device *bond_dev)
 	if (slave && IS_UP(slave->dev) && slave->link == BOND_LINK_UP)
 		bond_dev_queue_xmit(bond, skb, slave->dev);
 	else
-		kfree_skb(skb);
+		dev_kfree_skb_any(skb);
 
 	return NETDEV_TX_OK;
 }
@@ -3754,7 +3754,7 @@ static netdev_tx_t __bond_start_xmit(struct sk_buff *skb, struct net_device *dev
 		pr_err("%s: Error: Unknown bonding mode %d\n",
 		       dev->name, bond->params.mode);
 		WARN_ON_ONCE(1);
-		kfree_skb(skb);
+		dev_kfree_skb_any(skb);
 		return NETDEV_TX_OK;
 	}
 }
@@ -3775,7 +3775,7 @@ static netdev_tx_t bond_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (bond_has_slaves(bond))
 		ret = __bond_start_xmit(skb, dev);
 	else
-		kfree_skb(skb);
+		dev_kfree_skb_any(skb);
 	rcu_read_unlock();
 
 	return ret;
-- 
cgit v1.2.2


From f458b2ee93ee3606c83f76213fbe49e026bac754 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Tue, 11 Mar 2014 14:17:41 -0700
Subject: bnx2: Call dev_kfree_skby_any instead of dev_kfree_skb.

Replace dev_kfree_skb with dev_kfree_skb_any in functions that can
be called in hard irq and other contexts.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/bnx2.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c
index ca6b36220d94..c251ca3056de 100644
--- a/drivers/net/ethernet/broadcom/bnx2.c
+++ b/drivers/net/ethernet/broadcom/bnx2.c
@@ -2885,7 +2885,7 @@ bnx2_tx_int(struct bnx2 *bp, struct bnx2_napi *bnapi, int budget)
 		sw_cons = BNX2_NEXT_TX_BD(sw_cons);
 
 		tx_bytes += skb->len;
-		dev_kfree_skb(skb);
+		dev_kfree_skb_any(skb);
 		tx_pkt++;
 		if (tx_pkt == budget)
 			break;
@@ -6604,7 +6604,7 @@ bnx2_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	mapping = dma_map_single(&bp->pdev->dev, skb->data, len, PCI_DMA_TODEVICE);
 	if (dma_mapping_error(&bp->pdev->dev, mapping)) {
-		dev_kfree_skb(skb);
+		dev_kfree_skb_any(skb);
 		return NETDEV_TX_OK;
 	}
 
@@ -6697,7 +6697,7 @@ dma_error:
 			       PCI_DMA_TODEVICE);
 	}
 
-	dev_kfree_skb(skb);
+	dev_kfree_skb_any(skb);
 	return NETDEV_TX_OK;
 }
 
-- 
cgit v1.2.2


From 497a27b9e1bcf6dbaea7a466cfcd866927e1b431 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Tue, 11 Mar 2014 14:18:14 -0700
Subject: tg3: Call dev_kfree_skby_any instead of dev_kfree_skb.

Replace dev_kfree_skb with dev_kfree_skb_any in functions that can
be called in hard irq and other contexts.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/tg3.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index e12735fbdcdb..bbbd2a4bc161 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -6593,7 +6593,7 @@ static void tg3_tx(struct tg3_napi *tnapi)
 		pkts_compl++;
 		bytes_compl += skb->len;
 
-		dev_kfree_skb(skb);
+		dev_kfree_skb_any(skb);
 
 		if (unlikely(tx_bug)) {
 			tg3_tx_recover(tp);
@@ -6924,7 +6924,7 @@ static int tg3_rx(struct tg3_napi *tnapi, int budget)
 
 		if (len > (tp->dev->mtu + ETH_HLEN) &&
 		    skb->protocol != htons(ETH_P_8021Q)) {
-			dev_kfree_skb(skb);
+			dev_kfree_skb_any(skb);
 			goto drop_it_no_recycle;
 		}
 
@@ -7807,7 +7807,7 @@ static int tigon3_dma_hwbug_workaround(struct tg3_napi *tnapi,
 					  PCI_DMA_TODEVICE);
 		/* Make sure the mapping succeeded */
 		if (pci_dma_mapping_error(tp->pdev, new_addr)) {
-			dev_kfree_skb(new_skb);
+			dev_kfree_skb_any(new_skb);
 			ret = -1;
 		} else {
 			u32 save_entry = *entry;
@@ -7822,13 +7822,13 @@ static int tigon3_dma_hwbug_workaround(struct tg3_napi *tnapi,
 					    new_skb->len, base_flags,
 					    mss, vlan)) {
 				tg3_tx_skb_unmap(tnapi, save_entry, -1);
-				dev_kfree_skb(new_skb);
+				dev_kfree_skb_any(new_skb);
 				ret = -1;
 			}
 		}
 	}
 
-	dev_kfree_skb(skb);
+	dev_kfree_skb_any(skb);
 	*pskb = new_skb;
 	return ret;
 }
@@ -7871,7 +7871,7 @@ static int tg3_tso_bug(struct tg3 *tp, struct sk_buff *skb)
 	} while (segs);
 
 tg3_tso_bug_end:
-	dev_kfree_skb(skb);
+	dev_kfree_skb_any(skb);
 
 	return NETDEV_TX_OK;
 }
@@ -8093,7 +8093,7 @@ dma_error:
 	tg3_tx_skb_unmap(tnapi, tnapi->tx_prod, --i);
 	tnapi->tx_buffers[tnapi->tx_prod].skb = NULL;
 drop:
-	dev_kfree_skb(skb);
+	dev_kfree_skb_any(skb);
 drop_nofree:
 	tp->tx_dropped++;
 	return NETDEV_TX_OK;
-- 
cgit v1.2.2


From f7e79913a1d6a6139211ead3b03579b317d25a1f Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Tue, 11 Mar 2014 14:18:42 -0700
Subject: ixgb: Call dev_kfree_skby_any instead of dev_kfree_skb.

Replace dev_kfree_skb with dev_kfree_skb_any in functions that can
be called in hard irq and other contexts.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/ixgb/ixgb_main.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_main.c b/drivers/net/ethernet/intel/ixgb/ixgb_main.c
index 57e390cbe6d0..f42c201f727f 100644
--- a/drivers/net/ethernet/intel/ixgb/ixgb_main.c
+++ b/drivers/net/ethernet/intel/ixgb/ixgb_main.c
@@ -1521,12 +1521,12 @@ ixgb_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 	int tso;
 
 	if (test_bit(__IXGB_DOWN, &adapter->flags)) {
-		dev_kfree_skb(skb);
+		dev_kfree_skb_any(skb);
 		return NETDEV_TX_OK;
 	}
 
 	if (skb->len <= 0) {
-		dev_kfree_skb(skb);
+		dev_kfree_skb_any(skb);
 		return NETDEV_TX_OK;
 	}
 
@@ -1543,7 +1543,7 @@ ixgb_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 
 	tso = ixgb_tso(adapter, skb);
 	if (tso < 0) {
-		dev_kfree_skb(skb);
+		dev_kfree_skb_any(skb);
 		return NETDEV_TX_OK;
 	}
 
-- 
cgit v1.2.2


From e81f44b66b456a7dcfbdeffeb355458cd6a58973 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Tue, 11 Mar 2014 14:19:14 -0700
Subject: mlx4: Call dev_kfree_skby_any instead of dev_kfree_skb.

Replace dev_kfree_skb with dev_kfree_skb_any in functions that can
be called in hard irq and other contexts.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/mellanox/mlx4/en_tx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c
index 69c2fcef9d4c..dd1f6d346459 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c
@@ -314,7 +314,7 @@ static u32 mlx4_en_free_tx_desc(struct mlx4_en_priv *priv,
 			}
 		}
 	}
-	dev_kfree_skb(skb);
+	dev_kfree_skb_any(skb);
 	return tx_info->nr_txbb;
 }
 
-- 
cgit v1.2.2


From d8ec2c02caa3515f35d6c33eedf529394c419298 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Tue, 11 Mar 2014 14:19:50 -0700
Subject: benet: Call dev_kfree_skby_any instead of kfree_skb.

Replace free_skb with dev_kfree_skb_any in be_tx_compl_process as
which can be called in hard irq by netpoll, softirq context
by normal napi polling, and in normal sleepable context
by the network device close method.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/emulex/benet/be_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 41736937e040..239273b7b881 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -1919,7 +1919,7 @@ static u16 be_tx_compl_process(struct be_adapter *adapter,
 		queue_tail_inc(txq);
 	} while (cur_index != last_index);
 
-	kfree_skb(sent_skb);
+	dev_kfree_skb_any(sent_skb);
 	return num_wrbs;
 }
 
-- 
cgit v1.2.2


From c9974ad4aeb36003860100221a594f3c0ccc3f78 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Tue, 11 Mar 2014 14:20:26 -0700
Subject: gianfar: Carefully free skbs in functions called by netpoll.

netpoll can call functions in hard irq context that are ordinarily
called in lesser contexts.  For those functions use dev_kfree_skb_any
and dev_consume_skb_any so skbs are freed safely from hard irq
context.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/freescale/gianfar.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index 68d9bf7940f6..6e12f9365856 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -2192,13 +2192,13 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		skb_new = skb_realloc_headroom(skb, fcb_len);
 		if (!skb_new) {
 			dev->stats.tx_errors++;
-			kfree_skb(skb);
+			dev_kfree_skb_any(skb);
 			return NETDEV_TX_OK;
 		}
 
 		if (skb->sk)
 			skb_set_owner_w(skb_new, skb->sk);
-		consume_skb(skb);
+		dev_consume_skb_any(skb);
 		skb = skb_new;
 	}
 
-- 
cgit v1.2.2


From e25909bcdf2e43caa4ea9b1283ade2749da35639 Mon Sep 17 00:00:00 2001
From: Tom Herbert <therbert@google.com>
Date: Wed, 18 Dec 2013 16:46:48 +0000
Subject: net: e1000e calls skb_set_hash

Drivers should call skb_set_hash to set the hash and its type
in an skbuff.

Signed-off-by: Tom Herbert <therbert@google.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/e1000e/netdev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 5129c4cd14bc..3f044e736de8 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -878,7 +878,7 @@ static inline void e1000_rx_hash(struct net_device *netdev, __le32 rss,
 				 struct sk_buff *skb)
 {
 	if (netdev->features & NETIF_F_RXHASH)
-		skb->rxhash = le32_to_cpu(rss);
+		skb_set_hash(skb, le32_to_cpu(rss), PKT_HASH_TYPE_L3);
 }
 
 /**
-- 
cgit v1.2.2


From 42bdf083fe7017ff0233803175117a54d88eb540 Mon Sep 17 00:00:00 2001
From: Tom Herbert <therbert@google.com>
Date: Wed, 18 Dec 2013 16:46:58 +0000
Subject: net: igb calls skb_set_hash

Drivers should call skb_set_hash to set the hash and its type
in an skbuff.

Signed-off-by: Tom Herbert <therbert@google.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/igb/igb_main.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 3384156cf1b5..a96beb67e9ee 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -6620,7 +6620,9 @@ static inline void igb_rx_hash(struct igb_ring *ring,
 			       struct sk_buff *skb)
 {
 	if (ring->netdev->features & NETIF_F_RXHASH)
-		skb->rxhash = le32_to_cpu(rx_desc->wb.lower.hi_dword.rss);
+		skb_set_hash(skb,
+			     le32_to_cpu(rx_desc->wb.lower.hi_dword.rss),
+			     PKT_HASH_TYPE_L3);
 }
 
 /**
-- 
cgit v1.2.2


From f4c01e965fd0c623afa9fc8d9276d5ccdf297209 Mon Sep 17 00:00:00 2001
From: Carolyn Wyborny <carolyn.wyborny@intel.com>
Date: Wed, 12 Mar 2014 03:58:22 +0000
Subject: igb: Fix for devices using ethtool for EEE settings

This patch fixes a problem where using ethtool for EEE setting was not
working correctly.  This patch also fixes a problem where
the function that checks for EEE status on i354 devices was not being
called and was causing warnings with static analysis tools.

Reported-by: Rashika Kheria <rashika.kheria@gmail.com>
Reported-by: Josh Triplett <josh@joshtriplett.org>
Reported-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/igb/e1000_82575.h |  1 +
 drivers/net/ethernet/intel/igb/igb.h         |  3 ++
 drivers/net/ethernet/intel/igb/igb_ethtool.c | 45 +++++++++++-------
 drivers/net/ethernet/intel/igb/igb_main.c    | 69 ++++++++++++++++++++++------
 4 files changed, 88 insertions(+), 30 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.h b/drivers/net/ethernet/intel/igb/e1000_82575.h
index f12b086e578d..2a721a15afc1 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.h
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.h
@@ -265,6 +265,7 @@ u16 igb_rxpbs_adjust_82580(u32 data);
 s32 igb_read_emi_reg(struct e1000_hw *, u16 addr, u16 *data);
 s32 igb_set_eee_i350(struct e1000_hw *);
 s32 igb_set_eee_i354(struct e1000_hw *);
+s32 igb_get_eee_status_i354(struct e1000_hw *hw, bool *status);
 
 #define E1000_I2C_THERMAL_SENSOR_ADDR	0xF8
 #define E1000_EMC_INTERNAL_DATA		0x00
diff --git a/drivers/net/ethernet/intel/igb/igb.h b/drivers/net/ethernet/intel/igb/igb.h
index fc3fc2c6fe40..a202c9640e93 100644
--- a/drivers/net/ethernet/intel/igb/igb.h
+++ b/drivers/net/ethernet/intel/igb/igb.h
@@ -41,6 +41,7 @@
 #include <linux/i2c.h>
 #include <linux/i2c-algo-bit.h>
 #include <linux/pci.h>
+#include <linux/mdio.h>
 
 struct igb_adapter;
 
@@ -455,6 +456,7 @@ struct igb_adapter {
 	unsigned long link_check_timeout;
 	int copper_tries;
 	struct e1000_info ei;
+	u16 eee_advert;
 };
 
 #define IGB_FLAG_HAS_MSI		(1 << 0)
@@ -471,6 +473,7 @@ struct igb_adapter {
 #define IGB_FLAG_MAS_CAPABLE		(1 << 11)
 #define IGB_FLAG_MAS_ENABLE		(1 << 12)
 #define IGB_FLAG_HAS_MSIX		(1 << 13)
+#define IGB_FLAG_EEE			(1 << 14)
 
 /* Media Auto Sense */
 #define IGB_MAS_ENABLE_0		0X0001
diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c
index c7f574165298..170e4dbddc11 100644
--- a/drivers/net/ethernet/intel/igb/igb_ethtool.c
+++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c
@@ -2587,7 +2587,7 @@ static int igb_get_eee(struct net_device *netdev, struct ethtool_eee *edata)
 {
 	struct igb_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
-	u32 ipcnfg, eeer, ret_val;
+	u32 ret_val;
 	u16 phy_data;
 
 	if ((hw->mac.type < e1000_i350) ||
@@ -2596,16 +2596,25 @@ static int igb_get_eee(struct net_device *netdev, struct ethtool_eee *edata)
 
 	edata->supported = (SUPPORTED_1000baseT_Full |
 			    SUPPORTED_100baseT_Full);
+	if (!hw->dev_spec._82575.eee_disable)
+		edata->advertised =
+			mmd_eee_adv_to_ethtool_adv_t(adapter->eee_advert);
 
-	ipcnfg = rd32(E1000_IPCNFG);
-	eeer = rd32(E1000_EEER);
+	/* The IPCNFG and EEER registers are not supported on I354. */
+	if (hw->mac.type == e1000_i354) {
+		igb_get_eee_status_i354(hw, (bool *)&edata->eee_active);
+	} else {
+		u32 eeer;
+
+		eeer = rd32(E1000_EEER);
 
-	/* EEE status on negotiated link */
-	if (ipcnfg & E1000_IPCNFG_EEE_1G_AN)
-		edata->advertised = ADVERTISED_1000baseT_Full;
+		/* EEE status on negotiated link */
+		if (eeer & E1000_EEER_EEE_NEG)
+			edata->eee_active = true;
 
-	if (ipcnfg & E1000_IPCNFG_EEE_100M_AN)
-		edata->advertised |= ADVERTISED_100baseT_Full;
+		if (eeer & E1000_EEER_TX_LPI_EN)
+			edata->tx_lpi_enabled = true;
+	}
 
 	/* EEE Link Partner Advertised */
 	switch (hw->mac.type) {
@@ -2616,8 +2625,8 @@ static int igb_get_eee(struct net_device *netdev, struct ethtool_eee *edata)
 			return -ENODATA;
 
 		edata->lp_advertised = mmd_eee_adv_to_ethtool_adv_t(phy_data);
-
 		break;
+	case e1000_i354:
 	case e1000_i210:
 	case e1000_i211:
 		ret_val = igb_read_xmdio_reg(hw, E1000_EEE_LP_ADV_ADDR_I210,
@@ -2633,12 +2642,10 @@ static int igb_get_eee(struct net_device *netdev, struct ethtool_eee *edata)
 		break;
 	}
 
-	if (eeer & E1000_EEER_EEE_NEG)
-		edata->eee_active = true;
-
 	edata->eee_enabled = !hw->dev_spec._82575.eee_disable;
 
-	if (eeer & E1000_EEER_TX_LPI_EN)
+	if ((hw->mac.type == e1000_i354) &&
+	    (edata->eee_enabled))
 		edata->tx_lpi_enabled = true;
 
 	/* Report correct negotiated EEE status for devices that
@@ -2686,9 +2693,10 @@ static int igb_set_eee(struct net_device *netdev,
 			return -EINVAL;
 		}
 
-		if (eee_curr.advertised != edata->advertised) {
+		if (edata->advertised &
+		    ~(ADVERTISE_100_FULL | ADVERTISE_1000_FULL)) {
 			dev_err(&adapter->pdev->dev,
-				"Setting EEE Advertisement is not supported\n");
+				"EEE Advertisement supports only 100Tx and or 100T full duplex\n");
 			return -EINVAL;
 		}
 
@@ -2698,9 +2706,14 @@ static int igb_set_eee(struct net_device *netdev,
 			return -EINVAL;
 		}
 
+	adapter->eee_advert = ethtool_adv_to_mmd_eee_adv_t(edata->advertised);
 	if (hw->dev_spec._82575.eee_disable != !edata->eee_enabled) {
 		hw->dev_spec._82575.eee_disable = !edata->eee_enabled;
-		igb_set_eee_i350(hw);
+		adapter->flags |= IGB_FLAG_EEE;
+		if (hw->mac.type == e1000_i350)
+			igb_set_eee_i350(hw);
+		else
+			igb_set_eee_i354(hw);
 
 		/* reset link */
 		if (netif_running(netdev))
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index a96beb67e9ee..340a3449e1e9 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -1726,6 +1726,10 @@ int igb_up(struct igb_adapter *adapter)
 	hw->mac.get_link_status = 1;
 	schedule_work(&adapter->watchdog_task);
 
+	if ((adapter->flags & IGB_FLAG_EEE) &&
+	    (!hw->dev_spec._82575.eee_disable))
+		adapter->eee_advert = MDIO_EEE_100TX | MDIO_EEE_1000T;
+
 	return 0;
 }
 
@@ -1974,6 +1978,21 @@ void igb_reset(struct igb_adapter *adapter)
 		}
 	}
 #endif
+	/*Re-establish EEE setting */
+	if (hw->phy.media_type == e1000_media_type_copper) {
+		switch (mac->type) {
+		case e1000_i350:
+		case e1000_i210:
+		case e1000_i211:
+			igb_set_eee_i350(hw);
+			break;
+		case e1000_i354:
+			igb_set_eee_i354(hw);
+			break;
+		default:
+			break;
+		}
+	}
 	if (!netif_running(adapter->netdev))
 		igb_power_down_link(adapter);
 
@@ -2560,23 +2579,36 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		(adapter->flags & IGB_FLAG_HAS_MSIX) ? "MSI-X" :
 		(adapter->flags & IGB_FLAG_HAS_MSI) ? "MSI" : "legacy",
 		adapter->num_rx_queues, adapter->num_tx_queues);
-	switch (hw->mac.type) {
-	case e1000_i350:
-	case e1000_i210:
-	case e1000_i211:
-		igb_set_eee_i350(hw);
-		break;
-	case e1000_i354:
-		if (hw->phy.media_type == e1000_media_type_copper) {
+	if (hw->phy.media_type == e1000_media_type_copper) {
+		switch (hw->mac.type) {
+		case e1000_i350:
+		case e1000_i210:
+		case e1000_i211:
+			/* Enable EEE for internal copper PHY devices */
+			err = igb_set_eee_i350(hw);
+			if ((!err) &&
+			    (!hw->dev_spec._82575.eee_disable)) {
+				adapter->eee_advert =
+					MDIO_EEE_100TX | MDIO_EEE_1000T;
+				adapter->flags |= IGB_FLAG_EEE;
+			}
+			break;
+		case e1000_i354:
 			if ((rd32(E1000_CTRL_EXT) &
-			    E1000_CTRL_EXT_LINK_MODE_SGMII))
-				igb_set_eee_i354(hw);
+			    E1000_CTRL_EXT_LINK_MODE_SGMII)) {
+				err = igb_set_eee_i354(hw);
+				if ((!err) &&
+					(!hw->dev_spec._82575.eee_disable)) {
+					adapter->eee_advert =
+					   MDIO_EEE_100TX | MDIO_EEE_1000T;
+					adapter->flags |= IGB_FLAG_EEE;
+				}
+			}
+			break;
+		default:
+			break;
 		}
-		break;
-	default:
-		break;
 	}
-
 	pm_runtime_put_noidle(&pdev->dev);
 	return 0;
 
@@ -4158,6 +4190,15 @@ static void igb_watchdog_task(struct work_struct *work)
 			       (ctrl & E1000_CTRL_RFCE) ?  "RX" :
 			       (ctrl & E1000_CTRL_TFCE) ?  "TX" : "None");
 
+			/* disable EEE if enabled */
+			if ((adapter->flags & IGB_FLAG_EEE) &&
+				(adapter->link_duplex == HALF_DUPLEX)) {
+				dev_info(&adapter->pdev->dev,
+				"EEE Disabled: unsupported at half duplex. Re-enable using ethtool when at full duplex.\n");
+				adapter->hw.dev_spec._82575.eee_disable = true;
+				adapter->flags &= ~IGB_FLAG_EEE;
+			}
+
 			/* check if SmartSpeed worked */
 			igb_check_downshift(hw);
 			if (phy->speed_downgraded)
-- 
cgit v1.2.2


From 38da9853aa6d885353f4c96c553ce0462357d5d9 Mon Sep 17 00:00:00 2001
From: Tom Herbert <therbert@google.com>
Date: Wed, 18 Dec 2013 16:47:04 +0000
Subject: net: ixgbe calls skb_set_hash

Drivers should call skb_set_hash to set the hash and its type
in an skbuff.

Signed-off-by: Tom Herbert <therbert@google.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 10b35d82e309..815e81ed72a8 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -1311,7 +1311,9 @@ static inline void ixgbe_rx_hash(struct ixgbe_ring *ring,
 				 struct sk_buff *skb)
 {
 	if (ring->netdev->features & NETIF_F_RXHASH)
-		skb->rxhash = le32_to_cpu(rx_desc->wb.lower.hi_dword.rss);
+		skb_set_hash(skb,
+			     le32_to_cpu(rx_desc->wb.lower.hi_dword.rss),
+			     PKT_HASH_TYPE_L3);
 }
 
 #ifdef IXGBE_FCOE
-- 
cgit v1.2.2


From 0e7bcee42f32b4343f0ec2126cfd8d275905f655 Mon Sep 17 00:00:00 2001
From: Masanari Iida <standby24x7@gmail.com>
Date: Wed, 15 Jan 2014 01:14:42 +0900
Subject: ixgbe: Fix format string in ixgbe_fcoe.c

cppcheck detected following warning in ixgbe_fcoe.c
(warning) %d in format string (no. 1) requires 'int' but the
argument type is 'unsigned int'.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Tested-By: Jack Morgan<jack.morgan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
index f58db453a97e..08726177a3eb 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
@@ -585,7 +585,7 @@ static int ixgbe_fcoe_dma_pool_alloc(struct ixgbe_fcoe *fcoe,
 	struct dma_pool *pool;
 	char pool_name[32];
 
-	snprintf(pool_name, 32, "ixgbe_fcoe_ddp_%d", cpu);
+	snprintf(pool_name, 32, "ixgbe_fcoe_ddp_%u", cpu);
 
 	pool = dma_pool_create(pool_name, dev, IXGBE_FCPTR_MAX,
 			       IXGBE_FCPTR_ALIGN, PAGE_SIZE);
-- 
cgit v1.2.2


From 6997d4d1e629c23d01c3e66425f716f59e22e92e Mon Sep 17 00:00:00 2001
From: Jacob Keller <jacob.e.keller@intel.com>
Date: Sat, 22 Feb 2014 01:23:49 +0000
Subject: ixgbe: move setting rx_pb_size into get_invariants

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c | 3 +--
 drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c | 2 +-
 drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c  | 2 +-
 3 files changed, 3 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
index 15506f0780b2..650d7afe90c2 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
@@ -104,6 +104,7 @@ static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw)
 	mac->mcft_size = IXGBE_82598_MC_TBL_SIZE;
 	mac->vft_size = IXGBE_82598_VFT_TBL_SIZE;
 	mac->num_rar_entries = IXGBE_82598_RAR_ENTRIES;
+	mac->rx_pb_size = IXGBE_82598_RX_PB_SIZE;
 	mac->max_rx_queues = IXGBE_82598_MAX_RX_QUEUES;
 	mac->max_tx_queues = IXGBE_82598_MAX_TX_QUEUES;
 	mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw);
@@ -205,8 +206,6 @@ static s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw)
 		IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval);
 	}
 
-	hw->mac.rx_pb_size = IXGBE_82598_RX_PB_SIZE;
-
 	/* set the completion timeout for interface */
 	if (ret_val == 0)
 		ixgbe_set_pcie_completion_timeout(hw);
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
index b96cefd5a2eb..82b74623a3dd 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
@@ -270,6 +270,7 @@ static s32 ixgbe_get_invariants_82599(struct ixgbe_hw *hw)
 	mac->mcft_size = IXGBE_82599_MC_TBL_SIZE;
 	mac->vft_size = IXGBE_82599_VFT_TBL_SIZE;
 	mac->num_rar_entries = IXGBE_82599_RAR_ENTRIES;
+	mac->rx_pb_size = IXGBE_82599_RX_PB_SIZE;
 	mac->max_rx_queues = IXGBE_82599_MAX_RX_QUEUES;
 	mac->max_tx_queues = IXGBE_82599_MAX_TX_QUEUES;
 	mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw);
@@ -2025,7 +2026,6 @@ static s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw)
 
 	/* We need to run link autotry after the driver loads */
 	hw->mac.autotry_restart = true;
-	hw->mac.rx_pb_size = IXGBE_82599_RX_PB_SIZE;
 
 	if (ret_val == 0)
 		ret_val = ixgbe_verify_fw_version_82599(hw);
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
index c870f37f15d3..eed790ac14f8 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
@@ -61,6 +61,7 @@ static s32 ixgbe_get_invariants_X540(struct ixgbe_hw *hw)
 	mac->mcft_size = IXGBE_X540_MC_TBL_SIZE;
 	mac->vft_size = IXGBE_X540_VFT_TBL_SIZE;
 	mac->num_rar_entries = IXGBE_X540_RAR_ENTRIES;
+	mac->rx_pb_size = IXGBE_X540_RX_PB_SIZE;
 	mac->max_rx_queues = IXGBE_X540_MAX_RX_QUEUES;
 	mac->max_tx_queues = IXGBE_X540_MAX_TX_QUEUES;
 	mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw);
@@ -187,7 +188,6 @@ static s32 ixgbe_start_hw_X540(struct ixgbe_hw *hw)
 		goto out;
 
 	ret_val = ixgbe_start_hw_gen2(hw);
-	hw->mac.rx_pb_size = IXGBE_X540_RX_PB_SIZE;
 out:
 	return ret_val;
 }
-- 
cgit v1.2.2


From b89aae71db90248dcadba10d07fc57460fb3c4df Mon Sep 17 00:00:00 2001
From: Jacob Keller <jacob.e.keller@intel.com>
Date: Sat, 22 Feb 2014 01:23:50 +0000
Subject: ixgbe: add Linux NICS mailing list to contact info

This patch updates the contact information on the ixgbe driver files so
that every file includes the Linux NICS address, as it is still used,
but only a few of the files mentioned it.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe.h           | 1 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c     | 1 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c     | 1 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_common.c    | 1 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_common.h    | 1 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.c | 1 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.h | 1 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c   | 1 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c   | 1 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c      | 1 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.h      | 1 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c       | 1 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c      | 1 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.c       | 1 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.h       | 1 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c       | 1 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h       | 1 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c       | 1 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c     | 1 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h     | 1 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_sysfs.c     | 1 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_type.h      | 1 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c      | 1 +
 23 files changed, 23 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
index 4371ef0ed4a0..2fff0fc4e6e8 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
@@ -20,6 +20,7 @@
   the file called "COPYING".
 
   Contact Information:
+  Linux NICS <linux.nics@intel.com>
   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
index 650d7afe90c2..e61aa1f442ff 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
@@ -20,6 +20,7 @@
   the file called "COPYING".
 
   Contact Information:
+  Linux NICS <linux.nics@intel.com>
   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
index 82b74623a3dd..446df3cebf37 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
@@ -20,6 +20,7 @@
   the file called "COPYING".
 
   Contact Information:
+  Linux NICS <linux.nics@intel.com>
   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
index 4456c235a44a..6149c6574106 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
@@ -20,6 +20,7 @@
   the file called "COPYING".
 
   Contact Information:
+  Linux NICS <linux.nics@intel.com>
   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
index ef0fd4cef5df..d1d67ba54775 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
@@ -20,6 +20,7 @@
   the file called "COPYING".
 
   Contact Information:
+  Linux NICS <linux.nics@intel.com>
   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.c
index 05e23b80b5e3..bdb99b3b0f30 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.c
@@ -20,6 +20,7 @@
   the file called "COPYING".
 
   Contact Information:
+  Linux NICS <linux.nics@intel.com>
   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.h
index d71d9ce3e394..d5a1e3db0774 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.h
@@ -20,6 +20,7 @@
   the file called "COPYING".
 
   Contact Information:
+  Linux NICS <linux.nics@intel.com>
   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c
index c5933f6dceee..472b0f450bf9 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c
@@ -20,6 +20,7 @@
   the file called "COPYING".
 
   Contact Information:
+  Linux NICS <linux.nics@intel.com>
   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
index f2d35c04159c..24dd6f0233f3 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
@@ -20,6 +20,7 @@
   the file called "COPYING".
 
   Contact Information:
+  Linux NICS <linux.nics@intel.com>
   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
index 08726177a3eb..39557e3498a2 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
@@ -20,6 +20,7 @@
   the file called "COPYING".
 
   Contact Information:
+  Linux NICS <linux.nics@intel.com>
   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.h
index 3a02759b5e95..b16cc786750d 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.h
@@ -20,6 +20,7 @@
   the file called "COPYING".
 
   Contact Information:
+  Linux NICS <linux.nics@intel.com>
   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c
index 0834e1ea44bc..2067d392cc3d 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c
@@ -20,6 +20,7 @@
   the file called "COPYING".
 
   Contact Information:
+  Linux NICS <linux.nics@intel.com>
   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 815e81ed72a8..851c41377b47 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -20,6 +20,7 @@
   the file called "COPYING".
 
   Contact Information:
+  Linux NICS <linux.nics@intel.com>
   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.c
index cc3101afd29f..f5c6af2b891b 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.c
@@ -20,6 +20,7 @@
   the file called "COPYING".
 
   Contact Information:
+  Linux NICS <linux.nics@intel.com>
   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.h
index e44ff47659b5..a9b9ad69ed0e 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.h
@@ -20,6 +20,7 @@
   the file called "COPYING".
 
   Contact Information:
+  Linux NICS <linux.nics@intel.com>
   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
index d2caae4750e0..ad51c12cb26a 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
@@ -20,6 +20,7 @@
   the file called "COPYING".
 
   Contact Information:
+  Linux NICS <linux.nics@intel.com>
   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
index b4d4323666b8..478eca9761ca 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
@@ -20,6 +20,7 @@
   the file called "COPYING".
 
   Contact Information:
+  Linux NICS <linux.nics@intel.com>
   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c
index 9ef730f2916a..44ac9aef6a8d 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c
@@ -20,6 +20,7 @@
   the file called "COPYING".
 
   Contact Information:
+  Linux NICS <linux.nics@intel.com>
   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
index dff0977876f7..e6c68d396c99 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
@@ -20,6 +20,7 @@
   the file called "COPYING".
 
   Contact Information:
+  Linux NICS <linux.nics@intel.com>
   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h
index 8bd29190514e..139eaddfb2ed 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h
@@ -20,6 +20,7 @@
   the file called "COPYING".
 
   Contact Information:
+  Linux NICS <linux.nics@intel.com>
   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sysfs.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_sysfs.c
index e74ae3682733..ef6df3d6437e 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sysfs.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sysfs.c
@@ -20,6 +20,7 @@
   the file called "COPYING".
 
   Contact Information:
+  Linux NICS <linux.nics@intel.com>
   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
index c10382e5aabc..69271bc1b227 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
@@ -20,6 +20,7 @@
   the file called "COPYING".
 
   Contact Information:
+  Linux NICS <linux.nics@intel.com>
   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
index eed790ac14f8..2e0e5ec5d61f 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
@@ -20,6 +20,7 @@
   the file called "COPYING".
 
   Contact Information:
+  Linux NICS <linux.nics@intel.com>
   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 
-- 
cgit v1.2.2


From 4483470084ab5d933935b3f1a111d80b0850b41d Mon Sep 17 00:00:00 2001
From: Jacob Keller <jacob.e.keller@intel.com>
Date: Sat, 22 Feb 2014 01:23:51 +0000
Subject: ixgbe: fixup header for ixgbe_set_rxpba_82598

The header above this function did not match the function prototype.
This patch rewords the comment to specify the correct parameters.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
index e61aa1f442ff..f8ebe583a2ab 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
@@ -1241,14 +1241,14 @@ static void ixgbe_set_lan_id_multi_port_pcie_82598(struct ixgbe_hw *hw)
 }
 
 /**
- * ixgbe_set_rxpba_82598 - Configure packet buffers
+ * ixgbe_set_rxpba_82598 - Initialize RX packet buffer
  * @hw: pointer to hardware structure
- * @dcb_config: pointer to ixgbe_dcb_config structure
- *
- * Configure packet buffers.
- */
-static void ixgbe_set_rxpba_82598(struct ixgbe_hw *hw, int num_pb, u32 headroom,
-				  int strategy)
+ * @num_pb: number of packet buffers to allocate
+ * @headroom: reserve n KB of headroom
+ * @strategy: packet buffer allocation strategy
+ **/
+static void ixgbe_set_rxpba_82598(struct ixgbe_hw *hw, int num_pb,
+				  u32 headroom, int strategy)
 {
 	u32 rxpktsize = IXGBE_RXPBSIZE_64KB;
 	u8  i = 0;
-- 
cgit v1.2.2


From 305f8cec7be51e5bf2074e10416133546afa117e Mon Sep 17 00:00:00 2001
From: Jacob Keller <jacob.e.keller@intel.com>
Date: Sat, 22 Feb 2014 01:23:52 +0000
Subject: ixgbe: fix some multiline hw_dbg prints

This patch fixes some formatting on multilined print messages, so that
the text of the print appears on a single line, which aids in grepping
the sourcecode for where the error came from.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
index 446df3cebf37..3bc9b6718875 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
@@ -512,7 +512,7 @@ out:
  *
  * Disables link, should be called during D3 power down sequence.
  *
- */
+ **/
 static void ixgbe_stop_mac_link_on_d3_82599(struct ixgbe_hw *hw)
 {
 	u32 autoc2_reg;
@@ -1005,8 +1005,7 @@ static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw,
 
 out:
 	if (link_up && (link_speed == IXGBE_LINK_SPEED_1GB_FULL))
-		hw_dbg(hw, "Smartspeed has downgraded the link speed from "
-		       "the maximum advertised\n");
+		hw_dbg(hw, "Smartspeed has downgraded the link speed from the maximum advertised\n");
 	return status;
 }
 
@@ -1114,8 +1113,7 @@ static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw,
 				if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) {
 					status =
 					        IXGBE_ERR_AUTONEG_NOT_COMPLETE;
-					hw_dbg(hw, "Autoneg did not "
-					       "complete.\n");
+					hw_dbg(hw, "Autoneg did not complete.\n");
 				}
 			}
 		}
-- 
cgit v1.2.2


From 2f586f6bcd5367fbbd1d3352d524a3ef3183eeb2 Mon Sep 17 00:00:00 2001
From: Julia Lawall <Julia.Lawall@lip6.fr>
Date: Wed, 8 Jan 2014 08:04:32 +0000
Subject: ixgbevf: delete unneeded call to pci_set_power_state

This driver does not need to adjust the power state on suspend, so the
call to pci_set_power_state in the resume function is a no-op.  Drop it,
to make the code more understandable.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
index 6ac5da219150..475341d0ce7e 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
@@ -3280,7 +3280,6 @@ static int ixgbevf_resume(struct pci_dev *pdev)
 	struct ixgbevf_adapter *adapter = netdev_priv(netdev);
 	u32 err;
 
-	pci_set_power_state(pdev, PCI_D0);
 	pci_restore_state(pdev);
 	/*
 	 * pci_restore_state clears dev->state_saved so call
-- 
cgit v1.2.2


From 4e3b3bcd81776527fa6f11624d68849de8c8802e Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Mon, 10 Mar 2014 18:53:10 -0500
Subject: rtlwifi: rtl8723be: Fix array dimension problems

Commit a619d1abe20c leads to the following static checker warning:

drivers/net/wireless/rtlwifi/rtl8723be/phy.c:667 _rtl8723be_store_tx_power_by_rate()
error: buffer overflow 'rtlphy->tx_power_by_rate_offset[band]' 4 <= 5

This warning arises because the code is testing the indices for the wrong maximum
values. In addition, the tests merely putput a warning, and then procedes to
corrupt memory. With this change, any such invalid memory access is avoided.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtlwifi/rtl8723be/phy.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/phy.c b/drivers/net/wireless/rtlwifi/rtl8723be/phy.c
index cadae9bc4e3f..1575ef9ece9f 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723be/phy.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/phy.c
@@ -629,18 +629,22 @@ static void _rtl8723be_store_tx_power_by_rate(struct ieee80211_hw *hw,
 	struct rtl_phy *rtlphy = &(rtlpriv->phy);
 	u8 rate_section = _rtl8723be_get_rate_section_index(regaddr);
 
-	if (band != BAND_ON_2_4G && band != BAND_ON_5G)
+	if (band != BAND_ON_2_4G && band != BAND_ON_5G) {
 		RT_TRACE(rtlpriv, COMP_POWER, PHY_TXPWR,
 			 "Invalid Band %d\n", band);
+		return;
+	}
 
-	if (rfpath > MAX_RF_PATH)
+	if (rfpath > TX_PWR_BY_RATE_NUM_RF) {
 		RT_TRACE(rtlpriv, COMP_POWER, PHY_TXPWR,
 			 "Invalid RfPath %d\n", rfpath);
-
-	if (txnum > MAX_RF_PATH)
+		return;
+	}
+	if (txnum > TX_PWR_BY_RATE_NUM_RF) {
 		RT_TRACE(rtlpriv, COMP_POWER, PHY_TXPWR,
 			 "Invalid TxNum %d\n", txnum);
-
+		return;
+	}
 	rtlphy->tx_power_by_rate_offset[band][rfpath][txnum][rate_section] =
 									data;
 }
-- 
cgit v1.2.2


From 92ddcc7b8f1c14aa9f3ec98b14bcd421b21b01e4 Mon Sep 17 00:00:00 2001
From: Kumar Sanghvi <kumaras@chelsio.com>
Date: Thu, 13 Mar 2014 20:50:46 +0530
Subject: cxgb4: Fix some small bugs in t4_sge_init_soft() when our Page Size
 is 64KB

We'd come in with SGE_FL_BUFFER_SIZE[0] and [1] both equal to 64KB and the
extant logic would flag that as an error.

Based on original work by Casey Leedom <leedom@chelsio.com>

Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/chelsio/cxgb4/sge.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/chelsio/cxgb4/sge.c b/drivers/net/ethernet/chelsio/cxgb4/sge.c
index af76b25bb606..3a2ecd84afee 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/sge.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/sge.c
@@ -2596,11 +2596,19 @@ static int t4_sge_init_soft(struct adapter *adap)
 	fl_small_mtu = READ_FL_BUF(RX_SMALL_MTU_BUF);
 	fl_large_mtu = READ_FL_BUF(RX_LARGE_MTU_BUF);
 
+	/* We only bother using the Large Page logic if the Large Page Buffer
+	 * is larger than our Page Size Buffer.
+	 */
+	if (fl_large_pg <= fl_small_pg)
+		fl_large_pg = 0;
+
 	#undef READ_FL_BUF
 
+	/* The Page Size Buffer must be exactly equal to our Page Size and the
+	 * Large Page Size Buffer should be 0 (per above) or a power of 2.
+	 */
 	if (fl_small_pg != PAGE_SIZE ||
-	    (fl_large_pg != 0 && (fl_large_pg < fl_small_pg ||
-				  (fl_large_pg & (fl_large_pg-1)) != 0))) {
+	    (fl_large_pg & (fl_large_pg-1)) != 0) {
 		dev_err(adap->pdev_dev, "bad SGE FL page buffer sizes [%d, %d]\n",
 			fl_small_pg, fl_large_pg);
 		return -EINVAL;
-- 
cgit v1.2.2


From 68bce1922fa95e307f605cf43eac65e42c9076a6 Mon Sep 17 00:00:00 2001
From: Kumar Sanghvi <kumaras@chelsio.com>
Date: Thu, 13 Mar 2014 20:50:47 +0530
Subject: cxgb4: Add code to dump SGE registers when hitting idma hangs

Based on original work by Casey Leedom <leedom@chelsio.com>

Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/chelsio/cxgb4/cxgb4.h   |   1 +
 drivers/net/ethernet/chelsio/cxgb4/t4_hw.c   | 106 +++++++++++++++++++++++++++
 drivers/net/ethernet/chelsio/cxgb4/t4_regs.h |   3 +
 3 files changed, 110 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
index 944f2cbc1795..509c97610343 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
@@ -1032,4 +1032,5 @@ void t4_db_dropped(struct adapter *adapter);
 int t4_mem_win_read_len(struct adapter *adap, u32 addr, __be32 *data, int len);
 int t4_fwaddrspace_write(struct adapter *adap, unsigned int mbox,
 			 u32 addr, u32 val);
+void t4_sge_decode_idma_state(struct adapter *adapter, int state);
 #endif /* __CXGB4_H__ */
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
index d3c2a516fa88..fb2fe65903c2 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
@@ -2596,6 +2596,112 @@ int t4_mdio_wr(struct adapter *adap, unsigned int mbox, unsigned int phy_addr,
 	return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
 }
 
+/**
+ *	t4_sge_decode_idma_state - decode the idma state
+ *	@adap: the adapter
+ *	@state: the state idma is stuck in
+ */
+void t4_sge_decode_idma_state(struct adapter *adapter, int state)
+{
+	static const char * const t4_decode[] = {
+		"IDMA_IDLE",
+		"IDMA_PUSH_MORE_CPL_FIFO",
+		"IDMA_PUSH_CPL_MSG_HEADER_TO_FIFO",
+		"Not used",
+		"IDMA_PHYSADDR_SEND_PCIEHDR",
+		"IDMA_PHYSADDR_SEND_PAYLOAD_FIRST",
+		"IDMA_PHYSADDR_SEND_PAYLOAD",
+		"IDMA_SEND_FIFO_TO_IMSG",
+		"IDMA_FL_REQ_DATA_FL_PREP",
+		"IDMA_FL_REQ_DATA_FL",
+		"IDMA_FL_DROP",
+		"IDMA_FL_H_REQ_HEADER_FL",
+		"IDMA_FL_H_SEND_PCIEHDR",
+		"IDMA_FL_H_PUSH_CPL_FIFO",
+		"IDMA_FL_H_SEND_CPL",
+		"IDMA_FL_H_SEND_IP_HDR_FIRST",
+		"IDMA_FL_H_SEND_IP_HDR",
+		"IDMA_FL_H_REQ_NEXT_HEADER_FL",
+		"IDMA_FL_H_SEND_NEXT_PCIEHDR",
+		"IDMA_FL_H_SEND_IP_HDR_PADDING",
+		"IDMA_FL_D_SEND_PCIEHDR",
+		"IDMA_FL_D_SEND_CPL_AND_IP_HDR",
+		"IDMA_FL_D_REQ_NEXT_DATA_FL",
+		"IDMA_FL_SEND_PCIEHDR",
+		"IDMA_FL_PUSH_CPL_FIFO",
+		"IDMA_FL_SEND_CPL",
+		"IDMA_FL_SEND_PAYLOAD_FIRST",
+		"IDMA_FL_SEND_PAYLOAD",
+		"IDMA_FL_REQ_NEXT_DATA_FL",
+		"IDMA_FL_SEND_NEXT_PCIEHDR",
+		"IDMA_FL_SEND_PADDING",
+		"IDMA_FL_SEND_COMPLETION_TO_IMSG",
+		"IDMA_FL_SEND_FIFO_TO_IMSG",
+		"IDMA_FL_REQ_DATAFL_DONE",
+		"IDMA_FL_REQ_HEADERFL_DONE",
+	};
+	static const char * const t5_decode[] = {
+		"IDMA_IDLE",
+		"IDMA_ALMOST_IDLE",
+		"IDMA_PUSH_MORE_CPL_FIFO",
+		"IDMA_PUSH_CPL_MSG_HEADER_TO_FIFO",
+		"IDMA_SGEFLRFLUSH_SEND_PCIEHDR",
+		"IDMA_PHYSADDR_SEND_PCIEHDR",
+		"IDMA_PHYSADDR_SEND_PAYLOAD_FIRST",
+		"IDMA_PHYSADDR_SEND_PAYLOAD",
+		"IDMA_SEND_FIFO_TO_IMSG",
+		"IDMA_FL_REQ_DATA_FL",
+		"IDMA_FL_DROP",
+		"IDMA_FL_DROP_SEND_INC",
+		"IDMA_FL_H_REQ_HEADER_FL",
+		"IDMA_FL_H_SEND_PCIEHDR",
+		"IDMA_FL_H_PUSH_CPL_FIFO",
+		"IDMA_FL_H_SEND_CPL",
+		"IDMA_FL_H_SEND_IP_HDR_FIRST",
+		"IDMA_FL_H_SEND_IP_HDR",
+		"IDMA_FL_H_REQ_NEXT_HEADER_FL",
+		"IDMA_FL_H_SEND_NEXT_PCIEHDR",
+		"IDMA_FL_H_SEND_IP_HDR_PADDING",
+		"IDMA_FL_D_SEND_PCIEHDR",
+		"IDMA_FL_D_SEND_CPL_AND_IP_HDR",
+		"IDMA_FL_D_REQ_NEXT_DATA_FL",
+		"IDMA_FL_SEND_PCIEHDR",
+		"IDMA_FL_PUSH_CPL_FIFO",
+		"IDMA_FL_SEND_CPL",
+		"IDMA_FL_SEND_PAYLOAD_FIRST",
+		"IDMA_FL_SEND_PAYLOAD",
+		"IDMA_FL_REQ_NEXT_DATA_FL",
+		"IDMA_FL_SEND_NEXT_PCIEHDR",
+		"IDMA_FL_SEND_PADDING",
+		"IDMA_FL_SEND_COMPLETION_TO_IMSG",
+	};
+	static const u32 sge_regs[] = {
+		SGE_DEBUG_DATA_LOW_INDEX_2,
+		SGE_DEBUG_DATA_LOW_INDEX_3,
+		SGE_DEBUG_DATA_HIGH_INDEX_10,
+	};
+	const char **sge_idma_decode;
+	int sge_idma_decode_nstates;
+	int i;
+
+	if (is_t4(adapter->params.chip)) {
+		sge_idma_decode = (const char **)t4_decode;
+		sge_idma_decode_nstates = ARRAY_SIZE(t4_decode);
+	} else {
+		sge_idma_decode = (const char **)t5_decode;
+		sge_idma_decode_nstates = ARRAY_SIZE(t5_decode);
+	}
+
+	if (state < sge_idma_decode_nstates)
+		CH_WARN(adapter, "idma state %s\n", sge_idma_decode[state]);
+	else
+		CH_WARN(adapter, "idma state %d unknown\n", state);
+
+	for (i = 0; i < ARRAY_SIZE(sge_regs); i++)
+		CH_WARN(adapter, "SGE register %#x value %#x\n",
+			sge_regs[i], t4_read_reg(adapter, sge_regs[i]));
+}
+
 /**
  *      t4_fw_hello - establish communication with FW
  *      @adap: the adapter
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h b/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h
index 4082522d8140..33cf9eff0704 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h
@@ -278,6 +278,9 @@
 #define SGE_DEBUG_INDEX 0x10cc
 #define SGE_DEBUG_DATA_HIGH 0x10d0
 #define SGE_DEBUG_DATA_LOW 0x10d4
+#define SGE_DEBUG_DATA_LOW_INDEX_2	0x12c8
+#define SGE_DEBUG_DATA_LOW_INDEX_3	0x12cc
+#define SGE_DEBUG_DATA_HIGH_INDEX_10	0x12a8
 #define SGE_INGRESS_QUEUES_PER_PAGE_PF 0x10f4
 
 #define S_HP_INT_THRESH    28
-- 
cgit v1.2.2


From 0f4d201f74f0d4f1f88c367185591195c8151e9c Mon Sep 17 00:00:00 2001
From: Kumar Sanghvi <kumaras@chelsio.com>
Date: Thu, 13 Mar 2014 20:50:48 +0530
Subject: cxgb4: Rectify emitting messages about SGE Ingress DMA channels being
 potentially stuck

Based on original work by Casey Leedom <leedom@chelsio.com>

Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/chelsio/cxgb4/cxgb4.h |  9 ++-
 drivers/net/ethernet/chelsio/cxgb4/sge.c   | 90 ++++++++++++++++++++++++------
 2 files changed, 79 insertions(+), 20 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
index 509c97610343..50abe1d61287 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
@@ -556,8 +556,13 @@ struct sge {
 	u32 pktshift;               /* padding between CPL & packet data */
 	u32 fl_align;               /* response queue message alignment */
 	u32 fl_starve_thres;        /* Free List starvation threshold */
-	unsigned int starve_thres;
-	u8 idma_state[2];
+
+	/* State variables for detecting an SGE Ingress DMA hang */
+	unsigned int idma_1s_thresh;/* SGE same State Counter 1s threshold */
+	unsigned int idma_stalled[2];/* SGE synthesized stalled timers in HZ */
+	unsigned int idma_state[2]; /* SGE IDMA Hang detect state */
+	unsigned int idma_qid[2];   /* SGE IDMA Hung Ingress Queue ID */
+
 	unsigned int egr_start;
 	unsigned int ingr_start;
 	void *egr_map[MAX_EGRQ];    /* qid->queue egress queue map */
diff --git a/drivers/net/ethernet/chelsio/cxgb4/sge.c b/drivers/net/ethernet/chelsio/cxgb4/sge.c
index 3a2ecd84afee..054bb0389c09 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/sge.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/sge.c
@@ -93,6 +93,16 @@
  */
 #define TX_QCHECK_PERIOD (HZ / 2)
 
+/* SGE Hung Ingress DMA Threshold Warning time (in Hz) and Warning Repeat Rate
+ * (in RX_QCHECK_PERIOD multiples).  If we find one of the SGE Ingress DMA
+ * State Machines in the same state for this amount of time (in HZ) then we'll
+ * issue a warning about a potential hang.  We'll repeat the warning as the
+ * SGE Ingress DMA Channel appears to be hung every N RX_QCHECK_PERIODs till
+ * the situation clears.  If the situation clears, we'll note that as well.
+ */
+#define SGE_IDMA_WARN_THRESH (1 * HZ)
+#define SGE_IDMA_WARN_REPEAT (20 * RX_QCHECK_PERIOD)
+
 /*
  * Max number of Tx descriptors to be reclaimed by the Tx timer.
  */
@@ -2008,7 +2018,7 @@ irq_handler_t t4_intr_handler(struct adapter *adap)
 static void sge_rx_timer_cb(unsigned long data)
 {
 	unsigned long m;
-	unsigned int i, cnt[2];
+	unsigned int i, idma_same_state_cnt[2];
 	struct adapter *adap = (struct adapter *)data;
 	struct sge *s = &adap->sge;
 
@@ -2031,21 +2041,64 @@ static void sge_rx_timer_cb(unsigned long data)
 		}
 
 	t4_write_reg(adap, SGE_DEBUG_INDEX, 13);
-	cnt[0] = t4_read_reg(adap, SGE_DEBUG_DATA_HIGH);
-	cnt[1] = t4_read_reg(adap, SGE_DEBUG_DATA_LOW);
-
-	for (i = 0; i < 2; i++)
-		if (cnt[i] >= s->starve_thres) {
-			if (s->idma_state[i] || cnt[i] == 0xffffffff)
-				continue;
-			s->idma_state[i] = 1;
-			t4_write_reg(adap, SGE_DEBUG_INDEX, 11);
-			m = t4_read_reg(adap, SGE_DEBUG_DATA_LOW) >> (i * 16);
-			dev_warn(adap->pdev_dev,
-				 "SGE idma%u starvation detected for "
-				 "queue %lu\n", i, m & 0xffff);
-		} else if (s->idma_state[i])
-			s->idma_state[i] = 0;
+	idma_same_state_cnt[0] = t4_read_reg(adap, SGE_DEBUG_DATA_HIGH);
+	idma_same_state_cnt[1] = t4_read_reg(adap, SGE_DEBUG_DATA_LOW);
+
+	for (i = 0; i < 2; i++) {
+		u32 debug0, debug11;
+
+		/* If the Ingress DMA Same State Counter ("timer") is less
+		 * than 1s, then we can reset our synthesized Stall Timer and
+		 * continue.  If we have previously emitted warnings about a
+		 * potential stalled Ingress Queue, issue a note indicating
+		 * that the Ingress Queue has resumed forward progress.
+		 */
+		if (idma_same_state_cnt[i] < s->idma_1s_thresh) {
+			if (s->idma_stalled[i] >= SGE_IDMA_WARN_THRESH)
+				CH_WARN(adap, "SGE idma%d, queue%u,resumed after %d sec\n",
+					i, s->idma_qid[i],
+					s->idma_stalled[i]/HZ);
+			s->idma_stalled[i] = 0;
+			continue;
+		}
+
+		/* Synthesize an SGE Ingress DMA Same State Timer in the Hz
+		 * domain.  The first time we get here it'll be because we
+		 * passed the 1s Threshold; each additional time it'll be
+		 * because the RX Timer Callback is being fired on its regular
+		 * schedule.
+		 *
+		 * If the stall is below our Potential Hung Ingress Queue
+		 * Warning Threshold, continue.
+		 */
+		if (s->idma_stalled[i] == 0)
+			s->idma_stalled[i] = HZ;
+		else
+			s->idma_stalled[i] += RX_QCHECK_PERIOD;
+
+		if (s->idma_stalled[i] < SGE_IDMA_WARN_THRESH)
+			continue;
+
+		/* We'll issue a warning every SGE_IDMA_WARN_REPEAT Hz */
+		if (((s->idma_stalled[i] - HZ) % SGE_IDMA_WARN_REPEAT) != 0)
+			continue;
+
+		/* Read and save the SGE IDMA State and Queue ID information.
+		 * We do this every time in case it changes across time ...
+		 */
+		t4_write_reg(adap, SGE_DEBUG_INDEX, 0);
+		debug0 = t4_read_reg(adap, SGE_DEBUG_DATA_LOW);
+		s->idma_state[i] = (debug0 >> (i * 9)) & 0x3f;
+
+		t4_write_reg(adap, SGE_DEBUG_INDEX, 11);
+		debug11 = t4_read_reg(adap, SGE_DEBUG_DATA_LOW);
+		s->idma_qid[i] = (debug11 >> (i * 16)) & 0xffff;
+
+		CH_WARN(adap, "SGE idma%u, queue%u, maybe stuck state%u %dsecs (debug0=%#x, debug11=%#x)\n",
+			i, s->idma_qid[i], s->idma_state[i],
+			s->idma_stalled[i]/HZ, debug0, debug11);
+		t4_sge_decode_idma_state(adap, s->idma_state[i]);
+	}
 
 	mod_timer(&s->rx_timer, jiffies + RX_QCHECK_PERIOD);
 }
@@ -2756,8 +2809,9 @@ int t4_sge_init(struct adapter *adap)
 
 	setup_timer(&s->rx_timer, sge_rx_timer_cb, (unsigned long)adap);
 	setup_timer(&s->tx_timer, sge_tx_timer_cb, (unsigned long)adap);
-	s->starve_thres = core_ticks_per_usec(adap) * 1000000;  /* 1 s */
-	s->idma_state[0] = s->idma_state[1] = 0;
+	s->idma_1s_thresh = core_ticks_per_usec(adap) * 1000000;  /* 1 s */
+	s->idma_stalled[0] = 0;
+	s->idma_stalled[1] = 0;
 	spin_lock_init(&s->intrq_lock);
 
 	return 0;
-- 
cgit v1.2.2


From c2b955e0063411826d2c4540c96a8f2c4e1c2cb0 Mon Sep 17 00:00:00 2001
From: Kumar Sanghvi <kumaras@chelsio.com>
Date: Thu, 13 Mar 2014 20:50:49 +0530
Subject: cxgb4: Updates for T5 SGE's Egress Congestion Threshold

Based on original work by Casey Leedom <leedom@chelsio.com>

Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/chelsio/cxgb4/sge.c     | 18 +++++++++++++-----
 drivers/net/ethernet/chelsio/cxgb4/t4_regs.h |  6 ++++++
 2 files changed, 19 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/chelsio/cxgb4/sge.c b/drivers/net/ethernet/chelsio/cxgb4/sge.c
index 054bb0389c09..a7c56b3b9fc9 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/sge.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/sge.c
@@ -2776,8 +2776,8 @@ static int t4_sge_init_hard(struct adapter *adap)
 int t4_sge_init(struct adapter *adap)
 {
 	struct sge *s = &adap->sge;
-	u32 sge_control;
-	int ret;
+	u32 sge_control, sge_conm_ctrl;
+	int ret, egress_threshold;
 
 	/*
 	 * Ingress Padding Boundary and Egress Status Page Size are set up by
@@ -2802,10 +2802,18 @@ int t4_sge_init(struct adapter *adap)
 	 * SGE's Egress Congestion Threshold.  If it isn't, then we can get
 	 * stuck waiting for new packets while the SGE is waiting for us to
 	 * give it more Free List entries.  (Note that the SGE's Egress
-	 * Congestion Threshold is in units of 2 Free List pointers.)
+	 * Congestion Threshold is in units of 2 Free List pointers.) For T4,
+	 * there was only a single field to control this.  For T5 there's the
+	 * original field which now only applies to Unpacked Mode Free List
+	 * buffers and a new field which only applies to Packed Mode Free List
+	 * buffers.
 	 */
-	s->fl_starve_thres
-		= EGRTHRESHOLD_GET(t4_read_reg(adap, SGE_CONM_CTRL))*2 + 1;
+	sge_conm_ctrl = t4_read_reg(adap, SGE_CONM_CTRL);
+	if (is_t4(adap->params.chip))
+		egress_threshold = EGRTHRESHOLD_GET(sge_conm_ctrl);
+	else
+		egress_threshold = EGRTHRESHOLDPACKING_GET(sge_conm_ctrl);
+	s->fl_starve_thres = 2*egress_threshold + 1;
 
 	setup_timer(&s->rx_timer, sge_rx_timer_cb, (unsigned long)adap);
 	setup_timer(&s->tx_timer, sge_tx_timer_cb, (unsigned long)adap);
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h b/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h
index 33cf9eff0704..225ad8a5722d 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h
@@ -230,6 +230,12 @@
 #define  EGRTHRESHOLD(x)     ((x) << EGRTHRESHOLDshift)
 #define  EGRTHRESHOLD_GET(x) (((x) & EGRTHRESHOLD_MASK) >> EGRTHRESHOLDshift)
 
+#define EGRTHRESHOLDPACKING_MASK	0x3fU
+#define EGRTHRESHOLDPACKING_SHIFT	14
+#define EGRTHRESHOLDPACKING(x)		((x) << EGRTHRESHOLDPACKING_SHIFT)
+#define EGRTHRESHOLDPACKING_GET(x)	(((x) >> EGRTHRESHOLDPACKING_SHIFT) & \
+					  EGRTHRESHOLDPACKING_MASK)
+
 #define SGE_DBFIFO_STATUS 0x10a4
 #define  HP_INT_THRESH_SHIFT 28
 #define  HP_INT_THRESH_MASK  0xfU
-- 
cgit v1.2.2


From ca71de6ba7c18a3a1576e04f7ed8d8508ceba4c9 Mon Sep 17 00:00:00 2001
From: Kumar Sanghvi <kumaras@chelsio.com>
Date: Thu, 13 Mar 2014 20:50:50 +0530
Subject: cxgb4: Calculate len properly for LSO path

Commit 0034b29 ("cxgb4: Don't assume LSO only uses SGL path in t4_eth_xmit()")
introduced a regression where-in length was calculated wrongly for LSO path,
causing chip hangs.
So, correct the calculation of len.

Fixes: 0034b29 ("cxgb4: Don't assume LSO only uses SGL path in t4_eth_xmit()")
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/chelsio/cxgb4/sge.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/chelsio/cxgb4/sge.c b/drivers/net/ethernet/chelsio/cxgb4/sge.c
index a7c56b3b9fc9..46429f9d0592 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/sge.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/sge.c
@@ -1051,7 +1051,6 @@ out_free:	dev_kfree_skb(skb);
 	end = (u64 *)wr + flits;
 
 	len = immediate ? skb->len : 0;
-	len += sizeof(*cpl);
 	ssi = skb_shinfo(skb);
 	if (ssi->gso_size) {
 		struct cpl_tx_pkt_lso *lso = (void *)wr;
@@ -1079,6 +1078,7 @@ out_free:	dev_kfree_skb(skb);
 		q->tso++;
 		q->tx_cso += ssi->gso_segs;
 	} else {
+		len += sizeof(*cpl);
 		wr->op_immdlen = htonl(FW_WR_OP(FW_ETH_TX_PKT_WR) |
 				       FW_WR_IMMDLEN(len));
 		cpl = (void *)(wr + 1);
-- 
cgit v1.2.2


From 310c4d4e23d191156810f402c747e5e17c4dc0b1 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Tue, 11 Mar 2014 14:31:09 -0700
Subject: bnx2: Don't receive packets when the napi budget == 0

Processing any incoming packets with a with a napi budget of 0
is incorrect driver behavior.

This matters as netpoll will shortly call drivers with a budget of 0
to avoid receive packet processing happening in hard irq context.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/bnx2.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c
index c251ca3056de..2e42de239798 100644
--- a/drivers/net/ethernet/broadcom/bnx2.c
+++ b/drivers/net/ethernet/broadcom/bnx2.c
@@ -3132,6 +3132,9 @@ bnx2_rx_int(struct bnx2 *bp, struct bnx2_napi *bnapi, int budget)
 	struct l2_fhdr *rx_hdr;
 	int rx_pkt = 0, pg_ring_used = 0;
 
+	if (budget <= 0)
+		return rx_pkt;
+
 	hw_cons = bnx2_get_hw_rx_cons(bnapi);
 	sw_cons = rxr->rx_cons;
 	sw_prod = rxr->rx_prod;
-- 
cgit v1.2.2


From 50ff44be401b4d78388024b3e425e979904f304e Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Tue, 11 Mar 2014 14:31:43 -0700
Subject: 8139cp: Don't receive packets when the napi budget == 0

Processing any incoming packets with a with a napi budget of 0
is incorrect driver behavior.

This matters as netpoll will shortly call drivers with a budget of 0
to avoid receive packet processing happening in hard irq context.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/realtek/8139cp.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/realtek/8139cp.c b/drivers/net/ethernet/realtek/8139cp.c
index a3c1daa7ad5c..2bc728e65e24 100644
--- a/drivers/net/ethernet/realtek/8139cp.c
+++ b/drivers/net/ethernet/realtek/8139cp.c
@@ -476,7 +476,7 @@ rx_status_loop:
 	rx = 0;
 	cpw16(IntrStatus, cp_rx_intr_mask);
 
-	while (1) {
+	while (rx < budget) {
 		u32 status, len;
 		dma_addr_t mapping, new_mapping;
 		struct sk_buff *skb, *new_skb;
@@ -554,9 +554,6 @@ rx_next:
 		else
 			desc->opts1 = cpu_to_le32(DescOwn | cp->rx_buf_sz);
 		rx_tail = NEXT_RX(rx_tail);
-
-		if (rx >= budget)
-			break;
 	}
 
 	cp->rx_tail = rx_tail;
-- 
cgit v1.2.2


From 31c14a97039f6706205648602c81426f878906d0 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Tue, 11 Mar 2014 14:33:35 -0700
Subject: bcm63xx_enet: Stop pretending to support netpoll

bcm_enet_netpoll does not exist, and causing
bcm63xx_net to fail to build when NET_POLL_CONTROLLER
is defined.

Remove the bogus .ndo_poll_controller = bcm_enet_netpoll

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/bcm63xx_enet.c | 3 ---
 1 file changed, 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/bcm63xx_enet.c b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
index b9a5fb6400d3..a7d11f5565d6 100644
--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
@@ -1722,9 +1722,6 @@ static const struct net_device_ops bcm_enet_ops = {
 	.ndo_set_rx_mode	= bcm_enet_set_multicast_list,
 	.ndo_do_ioctl		= bcm_enet_ioctl,
 	.ndo_change_mtu		= bcm_enet_change_mtu,
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	.ndo_poll_controller = bcm_enet_netpoll,
-#endif
 };
 
 /*
-- 
cgit v1.2.2


From 702eca02b7c8574b42359512ebccfa777a71f66e Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben.dooks@codethink.co.uk>
Date: Wed, 12 Mar 2014 17:47:40 +0000
Subject: sh_eth: update OF PHY registeration

If the sh_eth device is registered using OF, then the driver
should call of_mdiobus_register() to register the PHYs described
in the devicetree and then use of_phy_connect() to connect the
PHYs to the device.

This ensures that any PHYs registered in the device tree are
appropriately connected to the parent devices nodes so that
the PHY drivers can access their OF properties.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/renesas/sh_eth.c | 59 +++++++++++++++++++++++------------
 1 file changed, 39 insertions(+), 20 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index b1e6554f44bc..236a4414173a 100644
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -3,6 +3,7 @@
  *  Copyright (C) 2006-2012 Nobuhiro Iwamatsu
  *  Copyright (C) 2008-2014 Renesas Solutions Corp.
  *  Copyright (C) 2013-2014 Cogent Embedded, Inc.
+ *  Copyright (C) 2014 Codethink Limited
  *
  *  This program is free software; you can redistribute it and/or modify it
  *  under the terms and conditions of the GNU General Public License,
@@ -40,6 +41,7 @@
 #include <linux/if_vlan.h>
 #include <linux/clk.h>
 #include <linux/sh_eth.h>
+#include <linux/of_mdio.h>
 
 #include "sh_eth.h"
 
@@ -1761,22 +1763,37 @@ static void sh_eth_adjust_link(struct net_device *ndev)
 /* PHY init function */
 static int sh_eth_phy_init(struct net_device *ndev)
 {
+	struct device_node *np = ndev->dev.parent->of_node;
 	struct sh_eth_private *mdp = netdev_priv(ndev);
-	char phy_id[MII_BUS_ID_SIZE + 3];
 	struct phy_device *phydev = NULL;
 
-	snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
-		 mdp->mii_bus->id, mdp->phy_id);
-
 	mdp->link = 0;
 	mdp->speed = 0;
 	mdp->duplex = -1;
 
 	/* Try connect to PHY */
-	phydev = phy_connect(ndev, phy_id, sh_eth_adjust_link,
-			     mdp->phy_interface);
+	if (np) {
+		struct device_node *pn;
+
+		pn = of_parse_phandle(np, "phy-handle", 0);
+		phydev = of_phy_connect(ndev, pn,
+					sh_eth_adjust_link, 0,
+					mdp->phy_interface);
+
+		if (!phydev)
+			phydev = ERR_PTR(-ENOENT);
+	} else {
+		char phy_id[MII_BUS_ID_SIZE + 3];
+
+		snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
+			 mdp->mii_bus->id, mdp->phy_id);
+
+		phydev = phy_connect(ndev, phy_id, sh_eth_adjust_link,
+				     mdp->phy_interface);
+	}
+
 	if (IS_ERR(phydev)) {
-		dev_err(&ndev->dev, "phy_connect failed\n");
+		dev_err(&ndev->dev, "failed to connect PHY\n");
 		return PTR_ERR(phydev);
 	}
 
@@ -2638,13 +2655,19 @@ static int sh_mdio_init(struct net_device *ndev, int id,
 		goto out_free_bus;
 	}
 
-	for (i = 0; i < PHY_MAX_ADDR; i++)
-		mdp->mii_bus->irq[i] = PHY_POLL;
-	if (pd->phy_irq > 0)
-		mdp->mii_bus->irq[pd->phy] = pd->phy_irq;
-
 	/* register mdio bus */
-	ret = mdiobus_register(mdp->mii_bus);
+	if (ndev->dev.parent->of_node) {
+		ret = of_mdiobus_register(mdp->mii_bus,
+					  ndev->dev.parent->of_node);
+	} else {
+		for (i = 0; i < PHY_MAX_ADDR; i++)
+			mdp->mii_bus->irq[i] = PHY_POLL;
+		if (pd->phy_irq > 0)
+			mdp->mii_bus->irq[pd->phy] = pd->phy_irq;
+
+		ret = mdiobus_register(mdp->mii_bus);
+	}
+
 	if (ret)
 		goto out_free_bus;
 
@@ -2719,7 +2742,6 @@ static struct sh_eth_plat_data *sh_eth_parse_dt(struct device *dev)
 {
 	struct device_node *np = dev->of_node;
 	struct sh_eth_plat_data *pdata;
-	struct device_node *phy;
 	const char *mac_addr;
 
 	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
@@ -2728,11 +2750,6 @@ static struct sh_eth_plat_data *sh_eth_parse_dt(struct device *dev)
 
 	pdata->phy_interface = of_get_phy_mode(np);
 
-	phy = of_parse_phandle(np, "phy-handle", 0);
-	if (of_property_read_u32(phy, "reg", &pdata->phy))
-		return NULL;
-	pdata->phy_irq = irq_of_parse_and_map(phy, 0);
-
 	mac_addr = of_get_mac_address(np);
 	if (mac_addr)
 		memcpy(pdata->mac_addr, mac_addr, ETH_ALEN);
@@ -2896,8 +2913,10 @@ static int sh_eth_drv_probe(struct platform_device *pdev)
 
 	/* mdio bus init */
 	ret = sh_mdio_init(ndev, pdev->id, pd);
-	if (ret)
+	if (ret) {
+		dev_err(&ndev->dev, "failed to initialise MDIO\n");
 		goto out_unregister;
+	}
 
 	/* print device information */
 	pr_info("Base address at 0x%x, %pM, IRQ %d.\n",
-- 
cgit v1.2.2


From f5335e00f30ef69f093e5074ecf8ef5e778baf3b Mon Sep 17 00:00:00 2001
From: Alexey Khoroshilov <khoroshilov@ispras.ru>
Date: Sat, 8 Mar 2014 01:11:49 +0400
Subject: p54usb: fix leaks at failure path in p54u_probe()

If p54u_load_firmware() fails, p54u_probe() does not deallocate
already allocated resources. The patch adds proper failure handling.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/p54/p54usb.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c
index b7ab3dfb3de8..043bd1c23c19 100644
--- a/drivers/net/wireless/p54/p54usb.c
+++ b/drivers/net/wireless/p54/p54usb.c
@@ -1053,6 +1053,10 @@ static int p54u_probe(struct usb_interface *intf,
 		priv->upload_fw = p54u_upload_firmware_net2280;
 	}
 	err = p54u_load_firmware(dev, intf);
+	if (err) {
+		usb_put_dev(udev);
+		p54_free_common(dev);
+	}
 	return err;
 }
 
-- 
cgit v1.2.2


From 8e17ea25b1e13075d37e976a5bacf10cc1916437 Mon Sep 17 00:00:00 2001
From: Amitkumar Karwar <akarwar@marvell.com>
Date: Fri, 7 Mar 2014 19:41:26 -0800
Subject: mwifiex: extract firmware API version number

The firmware API version number will be used for future patches
to support different firmware API specs.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/cmdevt.c | 1 +
 drivers/net/wireless/mwifiex/fw.h     | 2 ++
 drivers/net/wireless/mwifiex/main.h   | 1 +
 3 files changed, 4 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c
index 14e05c9f4663..b41155829220 100644
--- a/drivers/net/wireless/mwifiex/cmdevt.c
+++ b/drivers/net/wireless/mwifiex/cmdevt.c
@@ -1502,6 +1502,7 @@ int mwifiex_ret_get_hw_spec(struct mwifiex_private *priv,
 	}
 
 	adapter->fw_release_number = le32_to_cpu(hw_spec->fw_release_number);
+	adapter->fw_api_ver = (adapter->fw_release_number >> 16) & 0xff;
 	adapter->number_of_antenna = le16_to_cpu(hw_spec->number_of_antenna);
 
 	if (le32_to_cpu(hw_spec->dot_11ac_dev_cap)) {
diff --git a/drivers/net/wireless/mwifiex/fw.h b/drivers/net/wireless/mwifiex/fw.h
index 39cb3542f79c..5b3083488c04 100644
--- a/drivers/net/wireless/mwifiex/fw.h
+++ b/drivers/net/wireless/mwifiex/fw.h
@@ -515,6 +515,8 @@ enum P2P_MODES {
 #define ACT_TDLS_CREATE            0x01
 #define ACT_TDLS_CONFIG            0x02
 
+#define MWIFIEX_FW_V15		   15
+
 struct mwifiex_ie_types_header {
 	__le16 type;
 	__le16 len;
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index f0289c12e041..5f9bfb0a161c 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -802,6 +802,7 @@ struct mwifiex_adapter {
 	atomic_t pending_bridged_pkts;
 	struct semaphore *card_sem;
 	bool ext_scan;
+	u8 fw_api_ver;
 	u8 fw_key_api_major_ver, fw_key_api_minor_ver;
 };
 
-- 
cgit v1.2.2


From a0b7315a198094d5e6281b798a7363ee41e27fac Mon Sep 17 00:00:00 2001
From: Amitkumar Karwar <akarwar@marvell.com>
Date: Fri, 7 Mar 2014 19:41:27 -0800
Subject: mwifiex: add VHT MCS rate configuration support

During Tx rate configuration, newer firmware V15 expects bitmap
for VHT MCS rates as well.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/fw.h          |  1 +
 drivers/net/wireless/mwifiex/main.h        |  2 +-
 drivers/net/wireless/mwifiex/sta_cmd.c     | 14 ++++++++++++++
 drivers/net/wireless/mwifiex/sta_cmdresp.c |  9 +++++++++
 4 files changed, 25 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/fw.h b/drivers/net/wireless/mwifiex/fw.h
index 5b3083488c04..341e41978ac6 100644
--- a/drivers/net/wireless/mwifiex/fw.h
+++ b/drivers/net/wireless/mwifiex/fw.h
@@ -1105,6 +1105,7 @@ struct mwifiex_rate_scope {
 	__le16 hr_dsss_rate_bitmap;
 	__le16 ofdm_rate_bitmap;
 	__le16 ht_mcs_rate_bitmap[8];
+	__le16 vht_mcs_rate_bitmap[8];
 } __packed;
 
 struct mwifiex_rate_drop_pattern {
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index 5f9bfb0a161c..713dd247a153 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -116,7 +116,7 @@ enum {
 #define MWIFIEX_TYPE_DATA				0
 #define MWIFIEX_TYPE_EVENT				3
 
-#define MAX_BITMAP_RATES_SIZE			10
+#define MAX_BITMAP_RATES_SIZE			18
 
 #define MAX_CHANNEL_BAND_BG     14
 #define MAX_CHANNEL_BAND_A      165
diff --git a/drivers/net/wireless/mwifiex/sta_cmd.c b/drivers/net/wireless/mwifiex/sta_cmd.c
index 4315a3ba3b92..e3cac1495cc7 100644
--- a/drivers/net/wireless/mwifiex/sta_cmd.c
+++ b/drivers/net/wireless/mwifiex/sta_cmd.c
@@ -185,6 +185,13 @@ static int mwifiex_cmd_tx_rate_cfg(struct mwifiex_private *priv,
 		     i++)
 			rate_scope->ht_mcs_rate_bitmap[i] =
 				cpu_to_le16(pbitmap_rates[2 + i]);
+		if (priv->adapter->fw_api_ver == MWIFIEX_FW_V15) {
+			for (i = 0;
+			     i < ARRAY_SIZE(rate_scope->vht_mcs_rate_bitmap);
+			     i++)
+				rate_scope->vht_mcs_rate_bitmap[i] =
+					cpu_to_le16(pbitmap_rates[10 + i]);
+		}
 	} else {
 		rate_scope->hr_dsss_rate_bitmap =
 			cpu_to_le16(priv->bitmap_rates[0]);
@@ -195,6 +202,13 @@ static int mwifiex_cmd_tx_rate_cfg(struct mwifiex_private *priv,
 		     i++)
 			rate_scope->ht_mcs_rate_bitmap[i] =
 				cpu_to_le16(priv->bitmap_rates[2 + i]);
+		if (priv->adapter->fw_api_ver == MWIFIEX_FW_V15) {
+			for (i = 0;
+			     i < ARRAY_SIZE(rate_scope->vht_mcs_rate_bitmap);
+			     i++)
+				rate_scope->vht_mcs_rate_bitmap[i] =
+					cpu_to_le16(priv->bitmap_rates[10 + i]);
+		}
 	}
 
 	rate_drop = (struct mwifiex_rate_drop_pattern *) ((u8 *) rate_scope +
diff --git a/drivers/net/wireless/mwifiex/sta_cmdresp.c b/drivers/net/wireless/mwifiex/sta_cmdresp.c
index a8f7d545e22a..bfebb0144df5 100644
--- a/drivers/net/wireless/mwifiex/sta_cmdresp.c
+++ b/drivers/net/wireless/mwifiex/sta_cmdresp.c
@@ -304,6 +304,15 @@ static int mwifiex_ret_tx_rate_cfg(struct mwifiex_private *priv,
 				priv->bitmap_rates[2 + i] =
 					le16_to_cpu(rate_scope->
 						    ht_mcs_rate_bitmap[i]);
+
+			if (priv->adapter->fw_api_ver == MWIFIEX_FW_V15) {
+				for (i = 0; i < ARRAY_SIZE(rate_scope->
+							   vht_mcs_rate_bitmap);
+				     i++)
+					priv->bitmap_rates[10 + i] =
+					    le16_to_cpu(rate_scope->
+							vht_mcs_rate_bitmap[i]);
+			}
 			break;
 			/* Add RATE_DROP tlv here */
 		}
-- 
cgit v1.2.2


From c44379e2f9a21154e0d15e33f69bf970a596233a Mon Sep 17 00:00:00 2001
From: Amitkumar Karwar <akarwar@marvell.com>
Date: Fri, 7 Mar 2014 19:41:28 -0800
Subject: mwifiex: use VHT MCS mask in set bitrate mask handler

As V15 firmware supports VHT rate configuration, we can use this
information received in set bitrate mask handler.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/cfg80211.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index 51ce99cfcfb9..ee45d626eedb 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -1158,9 +1158,10 @@ static int mwifiex_cfg80211_set_bitrate_mask(struct wiphy *wiphy,
 	struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
 	u16 bitmap_rates[MAX_BITMAP_RATES_SIZE];
 	enum ieee80211_band band;
+	struct mwifiex_adapter *adapter = priv->adapter;
 
 	if (!priv->media_connected) {
-		dev_err(priv->adapter->dev,
+		dev_err(adapter->dev,
 			"Can not set Tx data rate in disconnected state\n");
 		return -EINVAL;
 	}
@@ -1181,9 +1182,16 @@ static int mwifiex_cfg80211_set_bitrate_mask(struct wiphy *wiphy,
 
 	/* Fill HT MCS rates */
 	bitmap_rates[2] = mask->control[band].ht_mcs[0];
-	if (priv->adapter->hw_dev_mcs_support == HT_STREAM_2X2)
+	if (adapter->hw_dev_mcs_support == HT_STREAM_2X2)
 		bitmap_rates[2] |= mask->control[band].ht_mcs[1] << 8;
 
+       /* Fill VHT MCS rates */
+	if (adapter->fw_api_ver == MWIFIEX_FW_V15) {
+		bitmap_rates[10] = mask->control[band].vht_mcs[0];
+		if (adapter->hw_dev_mcs_support == HT_STREAM_2X2)
+			bitmap_rates[11] = mask->control[band].vht_mcs[1];
+	}
+
 	return mwifiex_send_cmd(priv, HostCmd_CMD_TX_RATE_CFG,
 				HostCmd_ACT_GEN_SET, 0, bitmap_rates, true);
 }
-- 
cgit v1.2.2


From 63410c37d2d25a63968029a9cd6b324ac6b3a2c9 Mon Sep 17 00:00:00 2001
From: Amitkumar Karwar <akarwar@marvell.com>
Date: Fri, 7 Mar 2014 19:41:29 -0800
Subject: mwifiex: code rearrangement for better readability

Use negative check for 'status' and return from the function.
This improves readability by avoiding line splits. Also, local
variable is used for start window calculations.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/11n.c           | 20 +++++++--------
 drivers/net/wireless/mwifiex/11n_rxreorder.c | 38 ++++++++++++++--------------
 2 files changed, 29 insertions(+), 29 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/11n.c b/drivers/net/wireless/mwifiex/11n.c
index 79ead928a64e..ebc4cf648e15 100644
--- a/drivers/net/wireless/mwifiex/11n.c
+++ b/drivers/net/wireless/mwifiex/11n.c
@@ -166,21 +166,21 @@ int mwifiex_ret_11n_addba_req(struct mwifiex_private *priv,
 	tid = (le16_to_cpu(add_ba_rsp->block_ack_param_set)
 		& IEEE80211_ADDBA_PARAM_TID_MASK)
 		>> BLOCKACKPARAM_TID_POS;
-	if (le16_to_cpu(add_ba_rsp->status_code) == BA_RESULT_SUCCESS) {
-		tx_ba_tbl = mwifiex_get_ba_tbl(priv, tid,
-						add_ba_rsp->peer_mac_addr);
-		if (tx_ba_tbl) {
-			dev_dbg(priv->adapter->dev, "info: BA stream complete\n");
-			tx_ba_tbl->ba_status = BA_SETUP_COMPLETE;
-		} else {
-			dev_err(priv->adapter->dev, "BA stream not created\n");
-		}
-	} else {
+	if (le16_to_cpu(add_ba_rsp->status_code) != BA_RESULT_SUCCESS) {
 		mwifiex_del_ba_tbl(priv, tid, add_ba_rsp->peer_mac_addr,
 				   TYPE_DELBA_SENT, true);
 		if (add_ba_rsp->add_rsp_result != BA_RESULT_TIMEOUT)
 			priv->aggr_prio_tbl[tid].ampdu_ap =
 				BA_STREAM_NOT_ALLOWED;
+		return 0;
+	}
+
+	tx_ba_tbl = mwifiex_get_ba_tbl(priv, tid, add_ba_rsp->peer_mac_addr);
+	if (tx_ba_tbl) {
+		dev_dbg(priv->adapter->dev, "info: BA stream complete\n");
+		tx_ba_tbl->ba_status = BA_SETUP_COMPLETE;
+	} else {
+		dev_err(priv->adapter->dev, "BA stream not created\n");
 	}
 
 	return 0;
diff --git a/drivers/net/wireless/mwifiex/11n_rxreorder.c b/drivers/net/wireless/mwifiex/11n_rxreorder.c
index c3323c492614..8a8218d12a38 100644
--- a/drivers/net/wireless/mwifiex/11n_rxreorder.c
+++ b/drivers/net/wireless/mwifiex/11n_rxreorder.c
@@ -135,12 +135,13 @@ mwifiex_del_rx_reorder_entry(struct mwifiex_private *priv,
 			     struct mwifiex_rx_reorder_tbl *tbl)
 {
 	unsigned long flags;
+	int start_win;
 
 	if (!tbl)
 		return;
 
-	mwifiex_11n_dispatch_pkt(priv, tbl, (tbl->start_win + tbl->win_size) &
-					    (MAX_TID_VALUE - 1));
+	start_win = (tbl->start_win + tbl->win_size) & (MAX_TID_VALUE - 1);
+	mwifiex_11n_dispatch_pkt(priv, tbl, start_win);
 
 	del_timer_sync(&tbl->timer_context.timer);
 
@@ -228,17 +229,16 @@ mwifiex_flush_data(unsigned long context)
 {
 	struct reorder_tmr_cnxt *ctx =
 		(struct reorder_tmr_cnxt *) context;
-	int start_win;
+	int start_win, seq_num;
 
-	start_win = mwifiex_11n_find_last_seq_num(ctx->ptr);
+	seq_num = mwifiex_11n_find_last_seq_num(ctx->ptr);
 
-	if (start_win < 0)
+	if (seq_num < 0)
 		return;
 
-	dev_dbg(ctx->priv->adapter->dev, "info: flush data %d\n", start_win);
-	mwifiex_11n_dispatch_pkt(ctx->priv, ctx->ptr,
-				 (ctx->ptr->start_win + start_win + 1) &
-				 (MAX_TID_VALUE - 1));
+	dev_dbg(ctx->priv->adapter->dev, "info: flush data %d\n", seq_num);
+	start_win = (ctx->ptr->start_win + seq_num + 1) & (MAX_TID_VALUE - 1);
+	mwifiex_11n_dispatch_pkt(ctx->priv, ctx->ptr, start_win);
 }
 
 /*
@@ -611,16 +611,7 @@ int mwifiex_ret_11n_addba_resp(struct mwifiex_private *priv,
 	 * Check if we had rejected the ADDBA, if yes then do not create
 	 * the stream
 	 */
-	if (le16_to_cpu(add_ba_rsp->status_code) == BA_RESULT_SUCCESS) {
-		win_size = (block_ack_param_set &
-			IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK)
-			>> BLOCKACKPARAM_WINSIZE_POS;
-
-		dev_dbg(priv->adapter->dev,
-			"cmd: ADDBA RSP: %pM tid=%d ssn=%d win_size=%d\n",
-			add_ba_rsp->peer_mac_addr, tid,
-			add_ba_rsp->ssn, win_size);
-	} else {
+	if (le16_to_cpu(add_ba_rsp->status_code) != BA_RESULT_SUCCESS) {
 		dev_err(priv->adapter->dev, "ADDBA RSP: failed %pM tid=%d)\n",
 			add_ba_rsp->peer_mac_addr, tid);
 
@@ -628,8 +619,17 @@ int mwifiex_ret_11n_addba_resp(struct mwifiex_private *priv,
 						     add_ba_rsp->peer_mac_addr);
 		if (tbl)
 			mwifiex_del_rx_reorder_entry(priv, tbl);
+
+		return 0;
 	}
 
+	win_size = (block_ack_param_set & IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK)
+		    >> BLOCKACKPARAM_WINSIZE_POS;
+
+	dev_dbg(priv->adapter->dev,
+		"cmd: ADDBA RSP: %pM tid=%d ssn=%d win_size=%d\n",
+		add_ba_rsp->peer_mac_addr, tid, add_ba_rsp->ssn, win_size);
+
 	return 0;
 }
 
-- 
cgit v1.2.2


From 5e6e43eb20639aa8003794c076677c188ac01b3a Mon Sep 17 00:00:00 2001
From: Amitkumar Karwar <akarwar@marvell.com>
Date: Fri, 7 Mar 2014 19:41:30 -0800
Subject: mwifiex: create separate function mwifiex_11n_dispatch_pkt()

Existing mwifiex_11n_dispatch_pkt() function is renamed as
mwifiex_11n_dispatch_pkt_until_start_win() and a new function
mwifiex_11n_dispatch_pkt() is created for a common code which
dispatches single packet based on interface type.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/11n_rxreorder.c | 47 ++++++++++++++--------------
 1 file changed, 24 insertions(+), 23 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/11n_rxreorder.c b/drivers/net/wireless/mwifiex/11n_rxreorder.c
index 8a8218d12a38..2be015b77b15 100644
--- a/drivers/net/wireless/mwifiex/11n_rxreorder.c
+++ b/drivers/net/wireless/mwifiex/11n_rxreorder.c
@@ -26,6 +26,17 @@
 #include "11n.h"
 #include "11n_rxreorder.h"
 
+/* This function will process the rx packet and forward it to kernel/upper
+ * layer.
+ */
+static int mwifiex_11n_dispatch_pkt(struct mwifiex_private *priv, void *payload)
+{
+	if (priv->bss_role == MWIFIEX_BSS_ROLE_UAP)
+		return mwifiex_handle_uap_rx_forward(priv, payload);
+
+	return mwifiex_process_rx_packet(priv, payload);
+}
+
 /*
  * This function dispatches all packets in the Rx reorder table until the
  * start window.
@@ -35,8 +46,9 @@
  * circular buffer.
  */
 static void
-mwifiex_11n_dispatch_pkt(struct mwifiex_private *priv,
-			 struct mwifiex_rx_reorder_tbl *tbl, int start_win)
+mwifiex_11n_dispatch_pkt_until_start_win(struct mwifiex_private *priv,
+					 struct mwifiex_rx_reorder_tbl *tbl,
+					 int start_win)
 {
 	int pkt_to_send, i;
 	void *rx_tmp_ptr;
@@ -54,12 +66,8 @@ mwifiex_11n_dispatch_pkt(struct mwifiex_private *priv,
 			tbl->rx_reorder_ptr[i] = NULL;
 		}
 		spin_unlock_irqrestore(&priv->rx_pkt_lock, flags);
-		if (rx_tmp_ptr) {
-			if (priv->bss_role == MWIFIEX_BSS_ROLE_UAP)
-				mwifiex_handle_uap_rx_forward(priv, rx_tmp_ptr);
-			else
-				mwifiex_process_rx_packet(priv, rx_tmp_ptr);
-		}
+		if (rx_tmp_ptr)
+			mwifiex_11n_dispatch_pkt(priv, rx_tmp_ptr);
 	}
 
 	spin_lock_irqsave(&priv->rx_pkt_lock, flags);
@@ -101,11 +109,7 @@ mwifiex_11n_scan_and_dispatch(struct mwifiex_private *priv,
 		rx_tmp_ptr = tbl->rx_reorder_ptr[i];
 		tbl->rx_reorder_ptr[i] = NULL;
 		spin_unlock_irqrestore(&priv->rx_pkt_lock, flags);
-
-		if (priv->bss_role == MWIFIEX_BSS_ROLE_UAP)
-			mwifiex_handle_uap_rx_forward(priv, rx_tmp_ptr);
-		else
-			mwifiex_process_rx_packet(priv, rx_tmp_ptr);
+		mwifiex_11n_dispatch_pkt(priv, rx_tmp_ptr);
 	}
 
 	spin_lock_irqsave(&priv->rx_pkt_lock, flags);
@@ -141,7 +145,7 @@ mwifiex_del_rx_reorder_entry(struct mwifiex_private *priv,
 		return;
 
 	start_win = (tbl->start_win + tbl->win_size) & (MAX_TID_VALUE - 1);
-	mwifiex_11n_dispatch_pkt(priv, tbl, start_win);
+	mwifiex_11n_dispatch_pkt_until_start_win(priv, tbl, start_win);
 
 	del_timer_sync(&tbl->timer_context.timer);
 
@@ -238,7 +242,8 @@ mwifiex_flush_data(unsigned long context)
 
 	dev_dbg(ctx->priv->adapter->dev, "info: flush data %d\n", seq_num);
 	start_win = (ctx->ptr->start_win + seq_num + 1) & (MAX_TID_VALUE - 1);
-	mwifiex_11n_dispatch_pkt(ctx->priv, ctx->ptr, start_win);
+	mwifiex_11n_dispatch_pkt_until_start_win(ctx->priv, ctx->ptr,
+						 start_win);
 }
 
 /*
@@ -267,7 +272,7 @@ mwifiex_11n_create_rx_reorder_tbl(struct mwifiex_private *priv, u8 *ta,
 	 */
 	tbl = mwifiex_11n_get_rx_reorder_tbl(priv, tid, ta);
 	if (tbl) {
-		mwifiex_11n_dispatch_pkt(priv, tbl, seq_num);
+		mwifiex_11n_dispatch_pkt_until_start_win(priv, tbl, seq_num);
 		return;
 	}
 	/* if !tbl then create one */
@@ -459,12 +464,8 @@ int mwifiex_11n_rx_reorder_pkt(struct mwifiex_private *priv,
 
 	tbl = mwifiex_11n_get_rx_reorder_tbl(priv, tid, ta);
 	if (!tbl) {
-		if (pkt_type != PKT_TYPE_BAR) {
-			if (priv->bss_role == MWIFIEX_BSS_ROLE_UAP)
-				mwifiex_handle_uap_rx_forward(priv, payload);
-			else
-				mwifiex_process_rx_packet(priv, payload);
-		}
+		if (pkt_type != PKT_TYPE_BAR)
+			mwifiex_11n_dispatch_pkt(priv, payload);
 		return 0;
 	}
 	start_win = tbl->start_win;
@@ -520,7 +521,7 @@ int mwifiex_11n_rx_reorder_pkt(struct mwifiex_private *priv,
 			start_win = (end_win - win_size) + 1;
 		else
 			start_win = (MAX_TID_VALUE - (win_size - seq_num)) + 1;
-		mwifiex_11n_dispatch_pkt(priv, tbl, start_win);
+		mwifiex_11n_dispatch_pkt_until_start_win(priv, tbl, start_win);
 	}
 
 	if (pkt_type != PKT_TYPE_BAR) {
-- 
cgit v1.2.2


From 4c9f9fb29b3cdfa751c8ccf984a84fbe9e643b91 Mon Sep 17 00:00:00 2001
From: Amitkumar Karwar <akarwar@marvell.com>
Date: Fri, 7 Mar 2014 19:41:31 -0800
Subject: mwifiex: add AMSDU inside AMPDU support

Currently AMPDU aggregation is preferred over AMSDU. AMSDU
aggregation is performed only if AMPDU streams in firmware
are full.
This patch adds simultaneous AMSDU and AMPDU aggregation
support. This mechanism helps to improve throughput.
AMSDU is enabled only for 8897 chipsets which supports 4K
transmit buffer. User can disable AMSDU using
'disable_tx_amsdu' module parameter.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/11n.c           | 31 ++++++++++----
 drivers/net/wireless/mwifiex/11n.h           | 14 +++++++
 drivers/net/wireless/mwifiex/11n_rxreorder.c | 63 +++++++++++++++++++++++++++-
 drivers/net/wireless/mwifiex/ioctl.h         |  1 +
 drivers/net/wireless/mwifiex/main.h          |  4 ++
 drivers/net/wireless/mwifiex/sta_rx.c        | 21 +---------
 drivers/net/wireless/mwifiex/uap_txrx.c      | 22 +---------
 drivers/net/wireless/mwifiex/wmm.c           | 37 +++++++++++-----
 8 files changed, 132 insertions(+), 61 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/11n.c b/drivers/net/wireless/mwifiex/11n.c
index ebc4cf648e15..70159dd01acf 100644
--- a/drivers/net/wireless/mwifiex/11n.c
+++ b/drivers/net/wireless/mwifiex/11n.c
@@ -159,13 +159,13 @@ int mwifiex_ret_11n_addba_req(struct mwifiex_private *priv,
 	int tid;
 	struct host_cmd_ds_11n_addba_rsp *add_ba_rsp = &resp->params.add_ba_rsp;
 	struct mwifiex_tx_ba_stream_tbl *tx_ba_tbl;
+	u16 block_ack_param_set = le16_to_cpu(add_ba_rsp->block_ack_param_set);
 
 	add_ba_rsp->ssn = cpu_to_le16((le16_to_cpu(add_ba_rsp->ssn))
 			& SSN_MASK);
 
-	tid = (le16_to_cpu(add_ba_rsp->block_ack_param_set)
-		& IEEE80211_ADDBA_PARAM_TID_MASK)
-		>> BLOCKACKPARAM_TID_POS;
+	tid = (block_ack_param_set & IEEE80211_ADDBA_PARAM_TID_MASK)
+	       >> BLOCKACKPARAM_TID_POS;
 	if (le16_to_cpu(add_ba_rsp->status_code) != BA_RESULT_SUCCESS) {
 		mwifiex_del_ba_tbl(priv, tid, add_ba_rsp->peer_mac_addr,
 				   TYPE_DELBA_SENT, true);
@@ -179,6 +179,12 @@ int mwifiex_ret_11n_addba_req(struct mwifiex_private *priv,
 	if (tx_ba_tbl) {
 		dev_dbg(priv->adapter->dev, "info: BA stream complete\n");
 		tx_ba_tbl->ba_status = BA_SETUP_COMPLETE;
+		if ((block_ack_param_set & BLOCKACKPARAM_AMSDU_SUPP_MASK) &&
+		    priv->add_ba_param.tx_amsdu &&
+		    (priv->aggr_prio_tbl[tid].amsdu != BA_STREAM_NOT_ALLOWED))
+			tx_ba_tbl->amsdu = true;
+		else
+			tx_ba_tbl->amsdu = false;
 	} else {
 		dev_err(priv->adapter->dev, "BA stream not created\n");
 	}
@@ -541,6 +547,7 @@ int mwifiex_send_addba(struct mwifiex_private *priv, int tid, u8 *peer_mac)
 	u32 tx_win_size = priv->add_ba_param.tx_win_size;
 	static u8 dialog_tok;
 	int ret;
+	u16 block_ack_param_set;
 
 	dev_dbg(priv->adapter->dev, "cmd: %s: tid %d\n", __func__, tid);
 
@@ -559,10 +566,16 @@ int mwifiex_send_addba(struct mwifiex_private *priv, int tid, u8 *peer_mac)
 			tx_win_size = MWIFIEX_11AC_STA_AMPDU_DEF_TXWINSIZE;
 	}
 
-	add_ba_req.block_ack_param_set = cpu_to_le16(
-		(u16) ((tid << BLOCKACKPARAM_TID_POS) |
-		       tx_win_size << BLOCKACKPARAM_WINSIZE_POS |
-		       IMMEDIATE_BLOCK_ACK));
+	block_ack_param_set = (u16)((tid << BLOCKACKPARAM_TID_POS) |
+				    tx_win_size << BLOCKACKPARAM_WINSIZE_POS |
+				    IMMEDIATE_BLOCK_ACK);
+
+	/* enable AMSDU inside AMPDU */
+	if (priv->add_ba_param.tx_amsdu &&
+	    (priv->aggr_prio_tbl[tid].amsdu != BA_STREAM_NOT_ALLOWED))
+		block_ack_param_set |= BLOCKACKPARAM_AMSDU_SUPP_MASK;
+
+	add_ba_req.block_ack_param_set = cpu_to_le16(block_ack_param_set);
 	add_ba_req.block_ack_tmo = cpu_to_le16((u16)priv->add_ba_param.timeout);
 
 	++dialog_tok;
@@ -677,6 +690,7 @@ int mwifiex_get_tx_ba_stream_tbl(struct mwifiex_private *priv,
 		dev_dbg(priv->adapter->dev, "data: %s tid=%d\n",
 			__func__, rx_reo_tbl->tid);
 		memcpy(rx_reo_tbl->ra, tx_ba_tsr_tbl->ra, ETH_ALEN);
+		rx_reo_tbl->amsdu = tx_ba_tsr_tbl->amsdu;
 		rx_reo_tbl++;
 		count++;
 		if (count >= MWIFIEX_MAX_TX_BASTREAM_SUPPORTED)
@@ -732,5 +746,8 @@ void mwifiex_set_ba_params(struct mwifiex_private *priv)
 						MWIFIEX_STA_AMPDU_DEF_RXWINSIZE;
 	}
 
+	priv->add_ba_param.tx_amsdu = true;
+	priv->add_ba_param.rx_amsdu = true;
+
 	return;
 }
diff --git a/drivers/net/wireless/mwifiex/11n.h b/drivers/net/wireless/mwifiex/11n.h
index 12bb6acbdd58..40b007a00f4b 100644
--- a/drivers/net/wireless/mwifiex/11n.h
+++ b/drivers/net/wireless/mwifiex/11n.h
@@ -76,6 +76,20 @@ mwifiex_is_station_ampdu_allowed(struct mwifiex_private *priv,
 	return (node->ampdu_sta[tid] != BA_STREAM_NOT_ALLOWED) ? true : false;
 }
 
+/* This function checks whether AMSDU is allowed for BA stream. */
+static inline u8
+mwifiex_is_amsdu_in_ampdu_allowed(struct mwifiex_private *priv,
+				  struct mwifiex_ra_list_tbl *ptr, int tid)
+{
+	struct mwifiex_tx_ba_stream_tbl *tx_tbl;
+
+	tx_tbl = mwifiex_get_ba_tbl(priv, tid, ptr->ra);
+	if (tx_tbl)
+		return tx_tbl->amsdu;
+
+	return false;
+}
+
 /* This function checks whether AMPDU is allowed or not for a particular TID. */
 static inline u8
 mwifiex_is_ampdu_allowed(struct mwifiex_private *priv,
diff --git a/drivers/net/wireless/mwifiex/11n_rxreorder.c b/drivers/net/wireless/mwifiex/11n_rxreorder.c
index 2be015b77b15..0c3571f830b0 100644
--- a/drivers/net/wireless/mwifiex/11n_rxreorder.c
+++ b/drivers/net/wireless/mwifiex/11n_rxreorder.c
@@ -26,11 +26,50 @@
 #include "11n.h"
 #include "11n_rxreorder.h"
 
+/* This function will dispatch amsdu packet and forward it to kernel/upper
+ * layer.
+ */
+static int mwifiex_11n_dispatch_amsdu_pkt(struct mwifiex_private *priv,
+					  struct sk_buff *skb)
+{
+	struct rxpd *local_rx_pd = (struct rxpd *)(skb->data);
+	int ret;
+
+	if (le16_to_cpu(local_rx_pd->rx_pkt_type) == PKT_TYPE_AMSDU) {
+		struct sk_buff_head list;
+		struct sk_buff *rx_skb;
+
+		__skb_queue_head_init(&list);
+
+		skb_pull(skb, le16_to_cpu(local_rx_pd->rx_pkt_offset));
+		skb_trim(skb, le16_to_cpu(local_rx_pd->rx_pkt_length));
+
+		ieee80211_amsdu_to_8023s(skb, &list, priv->curr_addr,
+					 priv->wdev->iftype, 0, false);
+
+		while (!skb_queue_empty(&list)) {
+			rx_skb = __skb_dequeue(&list);
+			ret = mwifiex_recv_packet(priv, rx_skb);
+			if (ret == -1)
+				dev_err(priv->adapter->dev,
+					"Rx of A-MSDU failed");
+		}
+		return 0;
+	}
+
+	return -1;
+}
+
 /* This function will process the rx packet and forward it to kernel/upper
  * layer.
  */
 static int mwifiex_11n_dispatch_pkt(struct mwifiex_private *priv, void *payload)
 {
+	int ret = mwifiex_11n_dispatch_amsdu_pkt(priv, payload);
+
+	if (!ret)
+		return 0;
+
 	if (priv->bss_role == MWIFIEX_BSS_ROLE_UAP)
 		return mwifiex_handle_uap_rx_forward(priv, payload);
 
@@ -406,8 +445,11 @@ int mwifiex_cmd_11n_addba_rsp_gen(struct mwifiex_private *priv,
 		>> BLOCKACKPARAM_TID_POS;
 	add_ba_rsp->status_code = cpu_to_le16(ADDBA_RSP_STATUS_ACCEPT);
 	block_ack_param_set &= ~IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK;
-	/* We donot support AMSDU inside AMPDU, hence reset the bit */
-	block_ack_param_set &= ~BLOCKACKPARAM_AMSDU_SUPP_MASK;
+
+	/* If we don't support AMSDU inside AMPDU, reset the bit */
+	if (!priv->add_ba_param.rx_amsdu ||
+	    (priv->aggr_prio_tbl[tid].amsdu == BA_STREAM_NOT_ALLOWED))
+		block_ack_param_set &= ~BLOCKACKPARAM_AMSDU_SUPP_MASK;
 	block_ack_param_set |= rx_win_size << BLOCKACKPARAM_WINSIZE_POS;
 	add_ba_rsp->block_ack_param_set = cpu_to_le16(block_ack_param_set);
 	win_size = (le16_to_cpu(add_ba_rsp->block_ack_param_set)
@@ -468,6 +510,12 @@ int mwifiex_11n_rx_reorder_pkt(struct mwifiex_private *priv,
 			mwifiex_11n_dispatch_pkt(priv, payload);
 		return 0;
 	}
+
+	if ((pkt_type == PKT_TYPE_AMSDU) && !tbl->amsdu) {
+		mwifiex_11n_dispatch_pkt(priv, payload);
+		return 0;
+	}
+
 	start_win = tbl->start_win;
 	win_size = tbl->win_size;
 	end_win = ((start_win + win_size) - 1) & (MAX_TID_VALUE - 1);
@@ -627,6 +675,17 @@ int mwifiex_ret_11n_addba_resp(struct mwifiex_private *priv,
 	win_size = (block_ack_param_set & IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK)
 		    >> BLOCKACKPARAM_WINSIZE_POS;
 
+	tbl = mwifiex_11n_get_rx_reorder_tbl(priv, tid,
+					     add_ba_rsp->peer_mac_addr);
+	if (tbl) {
+		if ((block_ack_param_set & BLOCKACKPARAM_AMSDU_SUPP_MASK) &&
+		    priv->add_ba_param.rx_amsdu &&
+		    (priv->aggr_prio_tbl[tid].amsdu != BA_STREAM_NOT_ALLOWED))
+			tbl->amsdu = true;
+		else
+			tbl->amsdu = false;
+	}
+
 	dev_dbg(priv->adapter->dev,
 		"cmd: ADDBA RSP: %pM tid=%d ssn=%d win_size=%d\n",
 		add_ba_rsp->peer_mac_addr, tid, add_ba_rsp->ssn, win_size);
diff --git a/drivers/net/wireless/mwifiex/ioctl.h b/drivers/net/wireless/mwifiex/ioctl.h
index 1fb2212079ae..ee494db54060 100644
--- a/drivers/net/wireless/mwifiex/ioctl.h
+++ b/drivers/net/wireless/mwifiex/ioctl.h
@@ -177,6 +177,7 @@ struct mwifiex_ds_rx_reorder_tbl {
 struct mwifiex_ds_tx_ba_stream_tbl {
 	u16 tid;
 	u8 ra[ETH_ALEN];
+	u8 amsdu;
 };
 
 #define DBG_CMD_NUM	5
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index 713dd247a153..a67f7da12b30 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -192,6 +192,8 @@ struct mwifiex_add_ba_param {
 	u32 tx_win_size;
 	u32 rx_win_size;
 	u32 timeout;
+	u8 tx_amsdu;
+	u8 rx_amsdu;
 };
 
 struct mwifiex_tx_aggr {
@@ -560,6 +562,7 @@ struct mwifiex_tx_ba_stream_tbl {
 	int tid;
 	u8 ra[ETH_ALEN];
 	enum mwifiex_ba_status ba_status;
+	u8 amsdu;
 };
 
 struct mwifiex_rx_reorder_tbl;
@@ -579,6 +582,7 @@ struct mwifiex_rx_reorder_tbl {
 	int win_size;
 	void **rx_reorder_ptr;
 	struct reorder_tmr_cnxt timer_context;
+	u8 amsdu;
 	u8 flags;
 };
 
diff --git a/drivers/net/wireless/mwifiex/sta_rx.c b/drivers/net/wireless/mwifiex/sta_rx.c
index b6aa958bd6e4..ed26387eccf5 100644
--- a/drivers/net/wireless/mwifiex/sta_rx.c
+++ b/drivers/net/wireless/mwifiex/sta_rx.c
@@ -201,26 +201,7 @@ int mwifiex_process_sta_rx_packet(struct mwifiex_private *priv,
 		return ret;
 	}
 
-	if (rx_pkt_type == PKT_TYPE_AMSDU) {
-		struct sk_buff_head list;
-		struct sk_buff *rx_skb;
-
-		__skb_queue_head_init(&list);
-
-		skb_pull(skb, rx_pkt_offset);
-		skb_trim(skb, rx_pkt_length);
-
-		ieee80211_amsdu_to_8023s(skb, &list, priv->curr_addr,
-					 priv->wdev->iftype, 0, false);
-
-		while (!skb_queue_empty(&list)) {
-			rx_skb = __skb_dequeue(&list);
-			ret = mwifiex_recv_packet(priv, rx_skb);
-			if (ret == -1)
-				dev_err(adapter->dev, "Rx of A-MSDU failed");
-		}
-		return 0;
-	} else if (rx_pkt_type == PKT_TYPE_MGMT) {
+	if (rx_pkt_type == PKT_TYPE_MGMT) {
 		ret = mwifiex_process_mgmt_packet(priv, skb);
 		if (ret)
 			dev_err(adapter->dev, "Rx of mgmt packet failed");
diff --git a/drivers/net/wireless/mwifiex/uap_txrx.c b/drivers/net/wireless/mwifiex/uap_txrx.c
index 3c74eb254927..9a56bc61cb1d 100644
--- a/drivers/net/wireless/mwifiex/uap_txrx.c
+++ b/drivers/net/wireless/mwifiex/uap_txrx.c
@@ -284,27 +284,7 @@ int mwifiex_process_uap_rx_packet(struct mwifiex_private *priv,
 		return 0;
 	}
 
-	if (le16_to_cpu(uap_rx_pd->rx_pkt_type) == PKT_TYPE_AMSDU) {
-		struct sk_buff_head list;
-		struct sk_buff *rx_skb;
-
-		__skb_queue_head_init(&list);
-		skb_pull(skb, le16_to_cpu(uap_rx_pd->rx_pkt_offset));
-		skb_trim(skb, le16_to_cpu(uap_rx_pd->rx_pkt_length));
-
-		ieee80211_amsdu_to_8023s(skb, &list, priv->curr_addr,
-					 priv->wdev->iftype, 0, false);
-
-		while (!skb_queue_empty(&list)) {
-			rx_skb = __skb_dequeue(&list);
-			ret = mwifiex_recv_packet(priv, rx_skb);
-			if (ret)
-				dev_err(adapter->dev,
-					"AP:Rx A-MSDU failed");
-		}
-
-		return 0;
-	} else if (rx_pkt_type == PKT_TYPE_MGMT) {
+	if (rx_pkt_type == PKT_TYPE_MGMT) {
 		ret = mwifiex_process_mgmt_packet(priv, skb);
 		if (ret)
 			dev_err(adapter->dev, "Rx of mgmt packet failed");
diff --git a/drivers/net/wireless/mwifiex/wmm.c b/drivers/net/wireless/mwifiex/wmm.c
index 1c5f2b66f057..0a7cc742aed7 100644
--- a/drivers/net/wireless/mwifiex/wmm.c
+++ b/drivers/net/wireless/mwifiex/wmm.c
@@ -37,8 +37,8 @@
 /* Offset for TOS field in the IP header */
 #define IPTOS_OFFSET 5
 
-static bool enable_tx_amsdu;
-module_param(enable_tx_amsdu, bool, 0644);
+static bool disable_tx_amsdu;
+module_param(disable_tx_amsdu, bool, 0644);
 
 /* WMM information IE */
 static const u8 wmm_info_ie[] = { WLAN_EID_VENDOR_SPECIFIC, 0x07,
@@ -413,7 +413,13 @@ mwifiex_wmm_init(struct mwifiex_adapter *adapter)
 			continue;
 
 		for (i = 0; i < MAX_NUM_TID; ++i) {
-			priv->aggr_prio_tbl[i].amsdu = priv->tos_to_tid_inv[i];
+			if (!disable_tx_amsdu &&
+			    adapter->tx_buf_size > MWIFIEX_TX_DATA_BUF_SIZE_2K)
+				priv->aggr_prio_tbl[i].amsdu =
+							priv->tos_to_tid_inv[i];
+			else
+				priv->aggr_prio_tbl[i].amsdu =
+							BA_STREAM_NOT_ALLOWED;
 			priv->aggr_prio_tbl[i].ampdu_ap =
 							priv->tos_to_tid_inv[i];
 			priv->aggr_prio_tbl[i].ampdu_user =
@@ -1247,13 +1253,22 @@ mwifiex_dequeue_tx_packet(struct mwifiex_adapter *adapter)
 
 	if (!ptr->is_11n_enabled ||
 	    mwifiex_is_ba_stream_setup(priv, ptr, tid) ||
-	    priv->wps.session_enable ||
-	    ((priv->sec_info.wpa_enabled ||
-	      priv->sec_info.wpa2_enabled) &&
-	     !priv->wpa_is_gtk_set)) {
-		mwifiex_send_single_packet(priv, ptr, ptr_index, flags);
-		/* ra_list_spinlock has been freed in
-		   mwifiex_send_single_packet() */
+	    priv->wps.session_enable) {
+		if (ptr->is_11n_enabled &&
+		    mwifiex_is_ba_stream_setup(priv, ptr, tid) &&
+		    mwifiex_is_amsdu_in_ampdu_allowed(priv, ptr, tid) &&
+		    mwifiex_is_amsdu_allowed(priv, tid) &&
+		    mwifiex_is_11n_aggragation_possible(priv, ptr,
+							adapter->tx_buf_size))
+			mwifiex_11n_aggregate_pkt(priv, ptr, ptr_index, flags);
+			/* ra_list_spinlock has been freed in
+			 * mwifiex_11n_aggregate_pkt()
+			 */
+		else
+			mwifiex_send_single_packet(priv, ptr, ptr_index, flags);
+			/* ra_list_spinlock has been freed in
+			 * mwifiex_send_single_packet()
+			 */
 	} else {
 		if (mwifiex_is_ampdu_allowed(priv, ptr, tid) &&
 		    ptr->ba_pkt_count > ptr->ba_packet_thr) {
@@ -1268,7 +1283,7 @@ mwifiex_dequeue_tx_packet(struct mwifiex_adapter *adapter)
 				mwifiex_send_delba(priv, tid_del, ra, 1);
 			}
 		}
-		if (enable_tx_amsdu && mwifiex_is_amsdu_allowed(priv, tid) &&
+		if (mwifiex_is_amsdu_allowed(priv, tid) &&
 		    mwifiex_is_11n_aggragation_possible(priv, ptr,
 							adapter->tx_buf_size))
 			mwifiex_11n_aggregate_pkt(priv, ptr, ptr_index, flags);
-- 
cgit v1.2.2


From 6caefd1271910820db81d4c951a1fe2c9e16ee0b Mon Sep 17 00:00:00 2001
From: Andrea Merello <andrea.merello@gmail.com>
Date: Sat, 8 Mar 2014 18:36:37 +0100
Subject: rtl8180: prepare to handle more than two chip types

Currently a "r8185" integer variable is used as a boolean flag to
indicate whether the card is a rtl8185 or not.
Since now the driver supports only rtl8185 and rtl8180 cards, if
"r8185" variable is zero then the card is implicitly assumed to
be a rtl8180.

Now I'm preparing to add support for a third card type (rtl8187se).

This patch changes the "r8185" flag with an enum variable to
explicitly indicate which card type we have.

I'm submitting this this patch now, even if I still have to submit
other patches that not pertain with rtl8187se support, because
IMHO it's not worth rebasing them on the current code, using r8185
flag, and then changing them back again nearly immediately.
BTW if someone feels I really should do this, please tell me..

Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl8180/dev.c     | 37 ++++++++++++++++----------
 drivers/net/wireless/rtl818x/rtl8180/rtl8180.h |  6 ++++-
 2 files changed, 28 insertions(+), 15 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c
index 959e699702e8..3c2b784fd783 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c
@@ -148,7 +148,8 @@ static void rtl8180_handle_rx(struct ieee80211_hw *dev)
 			rx_status.antenna = (flags2 >> 15) & 1;
 			rx_status.rate_idx = (flags >> 20) & 0xF;
 			agc = (flags2 >> 17) & 0x7F;
-			if (priv->r8185) {
+
+			if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8185) {
 				if (rx_status.rate_idx > 3)
 					signal = 90 - clamp_t(u8, agc, 25, 90);
 				else
@@ -288,7 +289,7 @@ static void rtl8180_tx(struct ieee80211_hw *dev,
 		   (ieee80211_get_tx_rate(dev, info)->hw_value << 24) |
 		   skb->len;
 
-	if (priv->r8185)
+	if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180)
 		tx_flags |= RTL818X_TX_DESC_FLAG_DMA |
 			    RTL818X_TX_DESC_FLAG_NO_ENC;
 
@@ -305,7 +306,7 @@ static void rtl8180_tx(struct ieee80211_hw *dev,
 		rts_duration = ieee80211_rts_duration(dev, priv->vif, skb->len,
 						      info);
 
-	if (!priv->r8185) {
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180) {
 		unsigned int remainder;
 
 		plcp_len = DIV_ROUND_UP(16 * (skb->len + 4),
@@ -412,7 +413,7 @@ static int rtl8180_init_hw(struct ieee80211_hw *dev)
 
 	rtl818x_iowrite8(priv, &priv->map->MSR, 0);
 
-	if (!priv->r8185)
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180)
 		rtl8180_set_anaparam(priv, priv->anaparam);
 
 	rtl818x_iowrite32(priv, &priv->map->RDSAR, priv->rx_ring_dma);
@@ -425,7 +426,7 @@ static int rtl8180_init_hw(struct ieee80211_hw *dev)
 	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
 	reg = rtl818x_ioread8(priv, &priv->map->CONFIG2);
 	rtl818x_iowrite8(priv, &priv->map->CONFIG2, reg & ~(1 << 3));
-	if (priv->r8185) {
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8185) {
 		reg = rtl818x_ioread8(priv, &priv->map->CONFIG2);
 		rtl818x_iowrite8(priv, &priv->map->CONFIG2, reg | (1 << 4));
 	}
@@ -437,7 +438,7 @@ static int rtl8180_init_hw(struct ieee80211_hw *dev)
 
 	rtl818x_iowrite32(priv, &priv->map->INT_TIMEOUT, 0);
 
-	if (priv->r8185) {
+	if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180) {
 		rtl818x_iowrite8(priv, &priv->map->WPA_CONF, 0);
 		rtl818x_iowrite8(priv, &priv->map->RATE_FALLBACK, 0x81);
 		rtl818x_iowrite8(priv, &priv->map->RESP_RATE, (8 << 4) | 0);
@@ -460,7 +461,7 @@ static int rtl8180_init_hw(struct ieee80211_hw *dev)
 	}
 
 	priv->rf->init(dev);
-	if (priv->r8185)
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8185)
 		rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3);
 	return 0;
 }
@@ -624,7 +625,7 @@ static int rtl8180_start(struct ieee80211_hw *dev)
 	      RTL818X_RX_CONF_BROADCAST |
 	      RTL818X_RX_CONF_NICMAC;
 
-	if (priv->r8185)
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8185)
 		reg |= RTL818X_RX_CONF_CSDM1 | RTL818X_RX_CONF_CSDM2;
 	else {
 		reg |= (priv->rfparam & RF_PARAM_CARRIERSENSE1)
@@ -636,7 +637,7 @@ static int rtl8180_start(struct ieee80211_hw *dev)
 	priv->rx_conf = reg;
 	rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg);
 
-	if (priv->r8185) {
+	if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180) {
 		reg = rtl818x_ioread8(priv, &priv->map->CW_CONF);
 
 		/* CW is not on per-packet basis.
@@ -668,7 +669,9 @@ static int rtl8180_start(struct ieee80211_hw *dev)
 	reg |= (6 << 21 /* MAX TX DMA */) |
 	       RTL818X_TX_CONF_NO_ICV;
 
-	if (priv->r8185)
+
+
+	if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180)
 		reg &= ~RTL818X_TX_CONF_PROBE_DTS;
 	else
 		reg &= ~RTL818X_TX_CONF_HW_SEQNUM;
@@ -1052,15 +1055,22 @@ static int rtl8180_probe(struct pci_dev *pdev,
 	switch (reg) {
 	case RTL818X_TX_CONF_R8180_ABCD:
 		chip_name = "RTL8180";
+		priv->chip_family = RTL818X_CHIP_FAMILY_RTL8180;
 		break;
+
 	case RTL818X_TX_CONF_R8180_F:
 		chip_name = "RTL8180vF";
+		priv->chip_family = RTL818X_CHIP_FAMILY_RTL8180;
 		break;
+
 	case RTL818X_TX_CONF_R8185_ABC:
 		chip_name = "RTL8185";
+		priv->chip_family = RTL818X_CHIP_FAMILY_RTL8185;
 		break;
+
 	case RTL818X_TX_CONF_R8185_D:
 		chip_name = "RTL8185vD";
+		priv->chip_family = RTL818X_CHIP_FAMILY_RTL8185;
 		break;
 	default:
 		printk(KERN_ERR "%s (rtl8180): Unknown chip! (0x%x)\n",
@@ -1068,8 +1078,7 @@ static int rtl8180_probe(struct pci_dev *pdev,
 		goto err_iounmap;
 	}
 
-	priv->r8185 = reg & RTL818X_TX_CONF_R8185_ABC;
-	if (priv->r8185) {
+	if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180) {
 		priv->band.n_bitrates = ARRAY_SIZE(rtl818x_rates);
 		pci_try_set_mwi(pdev);
 	}
@@ -1118,7 +1127,7 @@ static int rtl8180_probe(struct pci_dev *pdev,
 
 	eeprom_93cx6_read(&eeprom, 0x17, &eeprom_val);
 	priv->csthreshold = eeprom_val >> 8;
-	if (!priv->r8185) {
+	if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8185) {
 		__le32 anaparam;
 		eeprom_93cx6_multiread(&eeprom, 0xD, (__le16 *)&anaparam, 2);
 		priv->anaparam = le32_to_cpu(anaparam);
@@ -1142,7 +1151,7 @@ static int rtl8180_probe(struct pci_dev *pdev,
 	}
 
 	/* OFDM TX power */
-	if (priv->r8185) {
+	if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180) {
 		for (i = 0; i < 14; i += 2) {
 			u16 txpwr;
 			eeprom_93cx6_read(&eeprom, 0x20 + (i >> 1), &txpwr);
diff --git a/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h b/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
index 30523314da43..b4a1c7958d69 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
+++ b/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
@@ -82,7 +82,11 @@ struct rtl8180_priv {
 	struct pci_dev *pdev;
 	u32 rx_conf;
 
-	int r8185;
+	enum {
+		RTL818X_CHIP_FAMILY_RTL8180,
+		RTL818X_CHIP_FAMILY_RTL8185,
+		RTL818X_CHIP_FAMILY_RTL8187SE
+	} chip_family;
 	u32 anaparam;
 	u16 rfparam;
 	u8 csthreshold;
-- 
cgit v1.2.2


From 3b3e0efb5c72c4fc940af50b33626b8a78a907dc Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Sun, 9 Mar 2014 11:02:54 +0100
Subject: ath9k: fix ready time of the multicast buffer queue

qi->tqi_readyTime is written directly to registers that expect
microseconds as unit instead of TU.
When setting the CABQ ready time, cur_conf->beacon_interval is in TU, so
convert it to microseconds before passing it to ath9k_hw.

This should hopefully fix some Tx DMA issues with buffered multicast
frames in AP mode.

Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/xmit.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index fafacfed44ea..3e7966b4b61e 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -1699,7 +1699,7 @@ int ath_cabq_update(struct ath_softc *sc)
 
 	ath9k_hw_get_txq_props(sc->sc_ah, qnum, &qi);
 
-	qi.tqi_readyTime = (cur_conf->beacon_interval *
+	qi.tqi_readyTime = (TU_TO_USEC(cur_conf->beacon_interval) *
 			    ATH_CABQ_READY_TIME) / 100;
 	ath_txq_update(sc, qnum, &qi);
 
-- 
cgit v1.2.2


From abee4c8414a621795bc7d4302061209a0b5d04c1 Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Sun, 9 Mar 2014 11:27:49 +0100
Subject: ath9k: clean up and enhance ANI debugfs file

Unify scnprintf calls and include the current OFDM/CCK immunity level.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/debug.c | 58 ++++++++++++++++------------------
 1 file changed, 28 insertions(+), 30 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c
index f8924efdad55..86abb3404dc7 100644
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
@@ -139,43 +139,41 @@ static ssize_t read_file_ani(struct file *file, char __user *user_buf,
 	const unsigned int size = 1024;
 	ssize_t retval = 0;
 	char *buf;
+	int i;
+	struct {
+		const char *name;
+		unsigned int val;
+	} ani_info[] = {
+		{ "ANI RESET", ah->stats.ast_ani_reset },
+		{ "OFDM LEVEL", ah->ani.ofdmNoiseImmunityLevel },
+		{ "CCK LEVEL", ah->ani.cckNoiseImmunityLevel },
+		{ "SPUR UP", ah->stats.ast_ani_spurup },
+		{ "SPUR DOWN", ah->stats.ast_ani_spurup },
+		{ "OFDM WS-DET ON", ah->stats.ast_ani_ofdmon },
+		{ "OFDM WS-DET OFF", ah->stats.ast_ani_ofdmoff },
+		{ "MRC-CCK ON", ah->stats.ast_ani_ccklow },
+		{ "MRC-CCK OFF", ah->stats.ast_ani_cckhigh },
+		{ "FIR-STEP UP", ah->stats.ast_ani_stepup },
+		{ "FIR-STEP DOWN", ah->stats.ast_ani_stepdown },
+		{ "INV LISTENTIME", ah->stats.ast_ani_lneg_or_lzero },
+		{ "OFDM ERRORS", ah->stats.ast_ani_ofdmerrs },
+		{ "CCK ERRORS", ah->stats.ast_ani_cckerrs },
+	};
 
 	buf = kzalloc(size, GFP_KERNEL);
 	if (buf == NULL)
 		return -ENOMEM;
 
-	if (common->disable_ani) {
-		len += scnprintf(buf + len, size - len, "%s: %s\n",
-				 "ANI", "DISABLED");
+	len += scnprintf(buf + len, size - len, "%15s: %s\n", "ANI",
+			 common->disable_ani ? "DISABLED" : "ENABLED");
+
+	if (common->disable_ani)
 		goto exit;
-	}
 
-	len += scnprintf(buf + len, size - len, "%15s: %s\n",
-			 "ANI", "ENABLED");
-	len += scnprintf(buf + len, size - len, "%15s: %u\n",
-			 "ANI RESET", ah->stats.ast_ani_reset);
-	len += scnprintf(buf + len, size - len, "%15s: %u\n",
-			 "SPUR UP", ah->stats.ast_ani_spurup);
-	len += scnprintf(buf + len, size - len, "%15s: %u\n",
-			 "SPUR DOWN", ah->stats.ast_ani_spurup);
-	len += scnprintf(buf + len, size - len, "%15s: %u\n",
-			 "OFDM WS-DET ON", ah->stats.ast_ani_ofdmon);
-	len += scnprintf(buf + len, size - len, "%15s: %u\n",
-			 "OFDM WS-DET OFF", ah->stats.ast_ani_ofdmoff);
-	len += scnprintf(buf + len, size - len, "%15s: %u\n",
-			 "MRC-CCK ON", ah->stats.ast_ani_ccklow);
-	len += scnprintf(buf + len, size - len, "%15s: %u\n",
-			 "MRC-CCK OFF", ah->stats.ast_ani_cckhigh);
-	len += scnprintf(buf + len, size - len, "%15s: %u\n",
-			 "FIR-STEP UP", ah->stats.ast_ani_stepup);
-	len += scnprintf(buf + len, size - len, "%15s: %u\n",
-			 "FIR-STEP DOWN", ah->stats.ast_ani_stepdown);
-	len += scnprintf(buf + len, size - len, "%15s: %u\n",
-			 "INV LISTENTIME", ah->stats.ast_ani_lneg_or_lzero);
-	len += scnprintf(buf + len, size - len, "%15s: %u\n",
-			 "OFDM ERRORS", ah->stats.ast_ani_ofdmerrs);
-	len += scnprintf(buf + len, size - len, "%15s: %u\n",
-			 "CCK ERRORS", ah->stats.ast_ani_cckerrs);
+	for (i = 0; i < ARRAY_SIZE(ani_info); i++)
+		len += scnprintf(buf + len, size - len, "%15s: %u\n",
+				 ani_info[i].name, ani_info[i].val);
+
 exit:
 	if (len > size)
 		len = size;
-- 
cgit v1.2.2


From 8fc1e8c240aab968db658b2d8d079b4391207a36 Mon Sep 17 00:00:00 2001
From: Emil Goode <emilgoode@gmail.com>
Date: Sun, 9 Mar 2014 21:06:51 +0100
Subject: brcmsmac: fix deadlock on missing firmware

When brcm80211 firmware is not installed networking hangs.
A deadlock happens because we call ieee80211_unregister_hw()
from the .start callback of struct ieee80211_ops. When .start
is called we are under rtnl lock and ieee80211_unregister_hw()
tries to take it again.

Function call stack:

dev_change_flags()
	__dev_change_flags()
		__dev_open()
			ASSERT_RTNL() <-- Assert rtnl lock
			ops->ndo_open()

.ndo_open = ieee80211_open,

ieee80211_open()
	ieee80211_do_open()
		drv_start()
			local->ops->start()

.start = brcms_ops_start,

brcms_ops_start()
	brcms_remove()
		ieee80211_unregister_hw()
			rtnl_lock() <-- Here we deadlock

Introduced by:
commit 25b5632fb35ca61b8ae3eee235edcdc2883f7a5e
("brcmsmac: request firmware in .start() callback")

This patch fixes the bug by removing the call to brcms_remove()
and moves the brcms_request_fw() call to the top of the .start
callback to not initiate anything unless firmware is installed.

Signed-off-by: Emil Goode <emilgoode@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
index 925034b80e9c..93598cd7ee6a 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
@@ -426,6 +426,12 @@ static int brcms_ops_start(struct ieee80211_hw *hw)
 	bool blocked;
 	int err;
 
+	if (!wl->ucode.bcm43xx_bomminor) {
+		err = brcms_request_fw(wl, wl->wlc->hw->d11core);
+		if (err)
+			return -ENOENT;
+	}
+
 	ieee80211_wake_queues(hw);
 	spin_lock_bh(&wl->lock);
 	blocked = brcms_rfkill_set_hw_state(wl);
@@ -433,14 +439,6 @@ static int brcms_ops_start(struct ieee80211_hw *hw)
 	if (!blocked)
 		wiphy_rfkill_stop_polling(wl->pub->ieee_hw->wiphy);
 
-	if (!wl->ucode.bcm43xx_bomminor) {
-		err = brcms_request_fw(wl, wl->wlc->hw->d11core);
-		if (err) {
-			brcms_remove(wl->wlc->hw->d11core);
-			return -ENOENT;
-		}
-	}
-
 	spin_lock_bh(&wl->lock);
 	/* avoid acknowledging frames before a non-monitor device is added */
 	wl->mute_tx = true;
-- 
cgit v1.2.2


From c94239374fec4b98ffa7e6161f1c2e1ce02ca3e2 Mon Sep 17 00:00:00 2001
From: Emil Goode <emilgoode@gmail.com>
Date: Sun, 9 Mar 2014 21:06:52 +0100
Subject: brcmsmac: update comment to reflect the code

The brcms_attach function is defined as static but the comment is
saying that it should not be static or gcc will issue a warning.
I believe we can remove the comment as I don't se a problem with
this function being defined as static.

Signed-off-by: Emil Goode <emilgoode@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c | 6 ------
 1 file changed, 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
index 93598cd7ee6a..8c5fa4e58139 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
@@ -1092,12 +1092,6 @@ static int ieee_hw_init(struct ieee80211_hw *hw)
  * Attach to the WL device identified by vendor and device parameters.
  * regs is a host accessible memory address pointing to WL device registers.
  *
- * brcms_attach is not defined as static because in the case where no bus
- * is defined, wl_attach will never be called, and thus, gcc will issue
- * a warning that this function is defined but not used if we declare
- * it as static.
- *
- *
  * is called in brcms_bcma_probe() context, therefore no locking required.
  */
 static struct brcms_info *brcms_attach(struct bcma_device *pdev)
-- 
cgit v1.2.2


From a0b2a8f4743f6ecaabbb764333f10ca38dc26dff Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Mon, 10 Mar 2014 15:05:25 +0100
Subject: wireless: Kconfig: add missing dependency for airo_cs

commit 4c59ff221e070 "wireless: Kconfig: add missing dependency" added a number
of 'depends on CFG80211' statements, but missed the AIRO_CS driver that
also causes the airo.c file to be built. This adds the (hopefully) last
such missing statement

Cc: "Zhao, Gang" <gamerh2o@gmail.com>
Cc: "John W. Linville" <linville@tuxdriver.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index d1fab435f5a3..9c2c285f35d5 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -116,7 +116,7 @@ config AT76C50X_USB
 
 config AIRO_CS
 	tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
-	depends on PCMCIA && (BROKEN || !M32R)
+	depends on CFG80211 && PCMCIA && (BROKEN || !M32R)
 	select WIRELESS_EXT
 	select WEXT_SPY
 	select WEXT_PRIV
-- 
cgit v1.2.2


From afdc05f09df633546da70c92f5d1557687331789 Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Mon, 10 Mar 2014 19:56:33 +0100
Subject: ath9k_hw: remove ANI function restrictions for AP mode

The primary purpose of this piece of code was to selectively disable
OFDM weak signal detection. The checks for this are elsewhere, and an
earlier commit relaxed the restrictions for older chips, which are more
sensitive to interference.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ani.c | 11 -----------
 1 file changed, 11 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c
index 2ce5079007b6..6d47783f2e5b 100644
--- a/drivers/net/wireless/ath/ath9k/ani.c
+++ b/drivers/net/wireless/ath/ath9k/ani.c
@@ -318,17 +318,6 @@ void ath9k_ani_reset(struct ath_hw *ah, bool is_scanning)
 	BUG_ON(aniState == NULL);
 	ah->stats.ast_ani_reset++;
 
-	/* only allow a subset of functions in AP mode */
-	if (ah->opmode == NL80211_IFTYPE_AP) {
-		if (IS_CHAN_2GHZ(chan)) {
-			ah->ani_function = (ATH9K_ANI_SPUR_IMMUNITY_LEVEL |
-					    ATH9K_ANI_FIRSTEP_LEVEL);
-			if (AR_SREV_9300_20_OR_LATER(ah))
-				ah->ani_function |= ATH9K_ANI_MRC_CCK;
-		} else
-			ah->ani_function = 0;
-	}
-
 	ofdm_nil = max_t(int, ATH9K_ANI_OFDM_DEF_LEVEL,
 			 aniState->ofdmNoiseImmunityLevel);
 	cck_nil = max_t(int, ATH9K_ANI_CCK_DEF_LEVEL,
-- 
cgit v1.2.2


From 28327fd096248ad1153e455ca8ffa205927b4b89 Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Tue, 11 Mar 2014 16:10:33 +0100
Subject: ath9k_hw: set ANI cycpwr_thr1 as absolute values instead of relative

The table was copied from the ANI implementation of AR9300. It assumes
that the INI values contain a baseline value that is usable as reference
from which to increase/decrease based on the noise immunity value.

On older chips, the differences are bigger and especially AR5008/AR9001
are configured to much more sensitive values than what is useful.

Improve ANI behavior by reverting to the absolute values used in the
previous implementation (expressed as a simple formula instead of the
old table).

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ar5008_phy.c | 44 ++++-------------------------
 1 file changed, 6 insertions(+), 38 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/ar5008_phy.c b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
index ff415e863ee9..504e189728cd 100644
--- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
@@ -26,10 +26,6 @@ static const int firstep_table[] =
 /* level:  0   1   2   3   4   5   6   7   8  */
 	{ -4, -2,  0,  2,  4,  6,  8, 10, 12 }; /* lvl 0-8, default 2 */
 
-static const int cycpwrThr1_table[] =
-/* level:  0   1   2   3   4   5   6   7   8  */
-	{ -6, -4, -2,  0,  2,  4,  6,  8 };     /* lvl 0-7, default 3 */
-
 /*
  * register values to turn OFDM weak signal detection OFF
  */
@@ -1073,41 +1069,13 @@ static bool ar5008_hw_ani_control_new(struct ath_hw *ah,
 	case ATH9K_ANI_SPUR_IMMUNITY_LEVEL:{
 		u32 level = param;
 
-		if (level >= ARRAY_SIZE(cycpwrThr1_table)) {
-			ath_dbg(common, ANI,
-				"ATH9K_ANI_SPUR_IMMUNITY_LEVEL: level out of range (%u > %zu)\n",
-				level, ARRAY_SIZE(cycpwrThr1_table));
-			return false;
-		}
-		/*
-		 * make register setting relative to default
-		 * from INI file & cap value
-		 */
-		value = cycpwrThr1_table[level] -
-			cycpwrThr1_table[ATH9K_ANI_SPUR_IMMUNE_LVL] +
-			aniState->iniDef.cycpwrThr1;
-		if (value < ATH9K_SIG_SPUR_IMM_SETTING_MIN)
-			value = ATH9K_SIG_SPUR_IMM_SETTING_MIN;
-		if (value > ATH9K_SIG_SPUR_IMM_SETTING_MAX)
-			value = ATH9K_SIG_SPUR_IMM_SETTING_MAX;
+		value = (level + 1) * 2;
 		REG_RMW_FIELD(ah, AR_PHY_TIMING5,
-			      AR_PHY_TIMING5_CYCPWR_THR1,
-			      value);
+			      AR_PHY_TIMING5_CYCPWR_THR1, value);
 
-		/*
-		 * set AR_PHY_EXT_CCA for extension channel
-		 * make register setting relative to default
-		 * from INI file & cap value
-		 */
-		value2 = cycpwrThr1_table[level] -
-			 cycpwrThr1_table[ATH9K_ANI_SPUR_IMMUNE_LVL] +
-			 aniState->iniDef.cycpwrThr1Ext;
-		if (value2 < ATH9K_SIG_SPUR_IMM_SETTING_MIN)
-			value2 = ATH9K_SIG_SPUR_IMM_SETTING_MIN;
-		if (value2 > ATH9K_SIG_SPUR_IMM_SETTING_MAX)
-			value2 = ATH9K_SIG_SPUR_IMM_SETTING_MAX;
-		REG_RMW_FIELD(ah, AR_PHY_EXT_CCA,
-			      AR_PHY_EXT_TIMING5_CYCPWR_THR1, value2);
+		if (IS_CHAN_HT40(ah->curchan))
+			REG_RMW_FIELD(ah, AR_PHY_EXT_CCA,
+				      AR_PHY_EXT_TIMING5_CYCPWR_THR1, value);
 
 		if (level != aniState->spurImmunityLevel) {
 			ath_dbg(common, ANI,
@@ -1124,7 +1092,7 @@ static bool ar5008_hw_ani_control_new(struct ath_hw *ah,
 				aniState->spurImmunityLevel,
 				level,
 				ATH9K_ANI_SPUR_IMMUNE_LVL,
-				value2,
+				value,
 				aniState->iniDef.cycpwrThr1Ext);
 			if (level > aniState->spurImmunityLevel)
 				ah->stats.ast_ani_spurup++;
-- 
cgit v1.2.2


From 9301ca90b6f447eca020ca6a66bf656b0a985d4d Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Tue, 11 Mar 2014 16:10:34 +0100
Subject: ath9k_hw: set ANI firstep as absolute values instead of relative

On older chips, the INI value differ in similar ways as cycpwr_thr1, so
convert it to absolute values as well.

Since the ANI algorithm is different here compared to the old
implementation (fewer steps, controlled at a different point in time),
it makes sense to use values similar to what would be applied for newer
chips, just without relying on INI defaults.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ar5008_phy.c | 41 ++++-------------------------
 1 file changed, 5 insertions(+), 36 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/ar5008_phy.c b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
index 504e189728cd..3b3e91057a4c 100644
--- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
@@ -917,7 +917,7 @@ static bool ar5008_hw_ani_control_new(struct ath_hw *ah,
 	struct ath_common *common = ath9k_hw_common(ah);
 	struct ath9k_channel *chan = ah->curchan;
 	struct ar5416AniState *aniState = &ah->ani;
-	s32 value, value2;
+	s32 value;
 
 	switch (cmd & ah->ani_function) {
 	case ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION:{
@@ -1004,42 +1004,11 @@ static bool ar5008_hw_ani_control_new(struct ath_hw *ah,
 	case ATH9K_ANI_FIRSTEP_LEVEL:{
 		u32 level = param;
 
-		if (level >= ARRAY_SIZE(firstep_table)) {
-			ath_dbg(common, ANI,
-				"ATH9K_ANI_FIRSTEP_LEVEL: level out of range (%u > %zu)\n",
-				level, ARRAY_SIZE(firstep_table));
-			return false;
-		}
-
-		/*
-		 * make register setting relative to default
-		 * from INI file & cap value
-		 */
-		value = firstep_table[level] -
-			firstep_table[ATH9K_ANI_FIRSTEP_LVL] +
-			aniState->iniDef.firstep;
-		if (value < ATH9K_SIG_FIRSTEP_SETTING_MIN)
-			value = ATH9K_SIG_FIRSTEP_SETTING_MIN;
-		if (value > ATH9K_SIG_FIRSTEP_SETTING_MAX)
-			value = ATH9K_SIG_FIRSTEP_SETTING_MAX;
+		value = level * 2;
 		REG_RMW_FIELD(ah, AR_PHY_FIND_SIG,
-			      AR_PHY_FIND_SIG_FIRSTEP,
-			      value);
-		/*
-		 * we need to set first step low register too
-		 * make register setting relative to default
-		 * from INI file & cap value
-		 */
-		value2 = firstep_table[level] -
-			 firstep_table[ATH9K_ANI_FIRSTEP_LVL] +
-			 aniState->iniDef.firstepLow;
-		if (value2 < ATH9K_SIG_FIRSTEP_SETTING_MIN)
-			value2 = ATH9K_SIG_FIRSTEP_SETTING_MIN;
-		if (value2 > ATH9K_SIG_FIRSTEP_SETTING_MAX)
-			value2 = ATH9K_SIG_FIRSTEP_SETTING_MAX;
-
+			      AR_PHY_FIND_SIG_FIRSTEP, value);
 		REG_RMW_FIELD(ah, AR_PHY_FIND_SIG_LOW,
-			      AR_PHY_FIND_SIG_FIRSTEP_LOW, value2);
+			      AR_PHY_FIND_SIG_FIRSTEP_LOW, value);
 
 		if (level != aniState->firstepLevel) {
 			ath_dbg(common, ANI,
@@ -1056,7 +1025,7 @@ static bool ar5008_hw_ani_control_new(struct ath_hw *ah,
 				aniState->firstepLevel,
 				level,
 				ATH9K_ANI_FIRSTEP_LVL,
-				value2,
+				value,
 				aniState->iniDef.firstepLow);
 			if (level > aniState->firstepLevel)
 				ah->stats.ast_ani_stepup++;
-- 
cgit v1.2.2


From b499abdc76d8b9780cb8918b8755e0437f741d80 Mon Sep 17 00:00:00 2001
From: John Greene <jogreene@redhat.com>
Date: Tue, 11 Mar 2014 14:08:34 -0400
Subject: ath5k: add missing dma_map_error call

Trivial patch to address this trace. Now calls dma_mapping_error and
return -ENOSPC if a problem found.

WARNING: at lib/dma-debug.c:933 check_unmap+0x47b/0x960()
Hardware name: Aspire 5515
ath5k 0000:02:00.0: DMA-API: device driver failed to check map
error[device address=0x00000000874fcd42] [size=45 bytes] [mapped as
single]
Modules linked in: bnep bluetooth ebtable_filter ebtables
ip6table_filter ip6_tables be2iscsi iscsi_boot_sysfs bnx2i cnic uio
cxgb4i cxgb4 cxgb3i cxgb3 mdio libcxgbi ib_iser rdma_cm ib_addr iw_cm
ib_cm ib_sa ib_mad ib_core iscsi_tcp libiscsi_tcp libiscsi
scsi_transport_iscsi arc4 snd_hda_codec_realtek snd_hda_intel
snd_hda_codec snd_hwdep snd_seq snd_seq_device ath5k ath snd_pcm
sparse_keymap snd_page_alloc mac80211 snd_timer sp5100_tco snd edac_core
k8temp soundcore edac_mce_amd i2c_piix4 cfg80211 rfkill shpchp vhost_net
tun macvtap macvlan kvm_amd kvm uinput dm_crypt ata_generic pata_acpi
radeon i2c_algo_bit pata_atiixp drm_kms_helper ttm drm r8169 mii
i2c_core wmi video sunrpc
Pid: 820, comm: firewalld Not tainted 3.9.0-0.rc3.git1.4.fc19.x86_64 #1
Call Trace:
 <IRQ>  [<ffffffff81068df0>] warn_slowpath_common+0x70/0xa0
 [<ffffffff81068e6c>] warn_slowpath_fmt+0x4c/0x50
 [<ffffffff8137ebeb>] check_unmap+0x47b/0x960
 [<ffffffff81021cf5>] ? native_sched_clock+0x15/0x80
 [<ffffffff81021d69>] ? sched_clock+0x9/0x10
 [<ffffffff8137f12f>] debug_dma_unmap_page+0x5f/0x70
 [<ffffffffa048fa07>] ath5k_tasklet_tx+0x157/0x3f0 [ath5k]
 [<ffffffff810acc0d>] ? sched_clock_local+0x1d/0x80
 [<ffffffff81072aa6>] ? tasklet_action+0x56/0x210
 [<ffffffff81072ae7>] tasklet_action+0x97/0x210
 [<ffffffff8107343f>] __do_softirq+0xff/0x400
 [<ffffffff81073905>] irq_exit+0xb5/0xc0
 [<ffffffff81728916>] do_IRQ+0x56/0xc0
 [<ffffffff8171dc32>] common_interrupt+0x72/0x72
 <EOI>  [<ffffffff811f1f81>] ? dput+0x111/0x310
 [<ffffffff811f1ea7>] ? dput+0x37/0x310
 [<ffffffff811e75e8>] link_path_walk+0x528/0x910
 [<ffffffff811ea624>] path_openat+0x94/0x530
 [<ffffffff811eb148>] do_filp_open+0x38/0x80
 [<ffffffff811e1dda>] open_exec+0x4a/0x130
 [<ffffffff81238be3>] load_elf_binary+0x7f3/0x18e0
 [<ffffffff81021d69>] ? sched_clock+0x9/0x10
 [<ffffffff810acc0d>] ? sched_clock_local+0x1d/0x80
 [<ffffffff810acd98>] ? sched_clock_cpu+0xa8/0x100
 [<ffffffff810d515d>] ? trace_hardirqs_off+0xd/0x10
 [<ffffffff810acedf>] ? local_clock+0x5f/0x70
 [<ffffffff810d5dbf>] ? lock_release_holdtime.part.28+0xf/0x190
 [<ffffffff812383f0>] ? elf_core_dump+0x1980/0x1980
 [<ffffffff811e1151>] search_binary_handler+0x1a1/0x4f0
 [<ffffffff811e1017>] ? search_binary_handler+0x67/0x4f0
 [<ffffffff811e28fc>] do_execve_common.isra.26+0x64c/0x710
 [<ffffffff811e23c2>] ? do_execve_common.isra.26+0x112/0x710
 [<ffffffff811e2cc6>] sys_execve+0x36/0x50
 [<ffffffff81727249>] stub_execve+0x69/0xa0

Signed-off-by: John Greene <jogreene@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath5k/base.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index ef35da84f63b..4b18434ba697 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -751,6 +751,9 @@ ath5k_txbuf_setup(struct ath5k_hw *ah, struct ath5k_buf *bf,
 	bf->skbaddr = dma_map_single(ah->dev, skb->data, skb->len,
 			DMA_TO_DEVICE);
 
+	if (dma_mapping_error(ah->dev, bf->skbaddr))
+		return -ENOSPC;
+
 	ieee80211_get_tx_rates(info->control.vif, (control) ? control->sta : NULL, skb, bf->rates,
 			       ARRAY_SIZE(bf->rates));
 
-- 
cgit v1.2.2


From 1b5c8d60d2257fd66ad789872845efd5c98bb26b Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Wed, 12 Mar 2014 10:22:38 -0700
Subject: ath9k: Convert uses of __constant_<foo> to <foo>

The use of __constant_<foo> has been unnecessary for quite awhile now.

Make these uses consistent with the rest of the kernel.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index b8daff78b9d1..d7625ecb6387 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -23,8 +23,8 @@
 #define COMP_HDR_LEN 4
 #define COMP_CKSUM_LEN 2
 
-#define LE16(x) __constant_cpu_to_le16(x)
-#define LE32(x) __constant_cpu_to_le32(x)
+#define LE16(x) cpu_to_le16(x)
+#define LE32(x) cpu_to_le32(x)
 
 /* Local defines to distinguish between extension and control CTL's */
 #define EXT_ADDITIVE (0x8000)
-- 
cgit v1.2.2


From c2d23c709c4ca2ddee4256689ac608ee50ec955a Mon Sep 17 00:00:00 2001
From: Jean Delvare <jdelvare@suse.de>
Date: Thu, 13 Mar 2014 23:21:08 +0100
Subject: brcmfmac: Make probe function __init

One of the benefits of platform_driver_probe() is that you can make
the probe function __init.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Hante Meuleman <meuleman@broadcom.com>
Cc: Arend van Spriel <arend@broadcom.com>
Cc: John W. Linville <linville@tuxdriver.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
index 4a6508e7e3a1..d737cf78469a 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
@@ -1153,7 +1153,7 @@ static struct sdio_driver brcmf_sdmmc_driver = {
 	},
 };
 
-static int brcmf_sdio_pd_probe(struct platform_device *pdev)
+static int __init brcmf_sdio_pd_probe(struct platform_device *pdev)
 {
 	brcmf_dbg(SDIO, "Enter\n");
 
-- 
cgit v1.2.2


From b936136da2223be28452162c3dd22c664a8c7f16 Mon Sep 17 00:00:00 2001
From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Thu, 13 Mar 2014 16:07:14 -0700
Subject: igb: Fix code comment

Recently added code comment was missing a space that is needed.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/igb/igb_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 340a3449e1e9..ea8b9c41cf9f 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -1978,7 +1978,7 @@ void igb_reset(struct igb_adapter *adapter)
 		}
 	}
 #endif
-	/*Re-establish EEE setting */
+	/* Re-establish EEE setting */
 	if (hw->phy.media_type == e1000_media_type_copper) {
 		switch (mac->type) {
 		case e1000_i350:
-- 
cgit v1.2.2


From a48665970962a9b50aa81722ca4e943fcfdc6699 Mon Sep 17 00:00:00 2001
From: Shannon Nelson <shannon.nelson@intel.com>
Date: Tue, 11 Feb 2014 08:24:07 +0000
Subject: i40e: delete netdev after deleting napi and vectors

We've been deleting the netdev before getting around to deleting the napi
structs.  Unfortunately, we then didn't delete the napi structs because we
have a check for netdev, thus we were leaving garbage around in the system.

Change-ID: Ife540176f6c9f801147495b3f2d2ac2e61ddcc58
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 43d391bb65c4..a3f122eb9f7e 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -6806,8 +6806,6 @@ int i40e_vsi_release(struct i40e_vsi *vsi)
 			if (vsi->netdev) {
 				/* results in a call to i40e_close() */
 				unregister_netdev(vsi->netdev);
-				free_netdev(vsi->netdev);
-				vsi->netdev = NULL;
 			}
 		} else {
 			if (!test_and_set_bit(__I40E_DOWN, &vsi->state))
@@ -6826,6 +6824,10 @@ int i40e_vsi_release(struct i40e_vsi *vsi)
 
 	i40e_vsi_delete(vsi);
 	i40e_vsi_free_q_vectors(vsi);
+	if (vsi->netdev) {
+		free_netdev(vsi->netdev);
+		vsi->netdev = NULL;
+	}
 	i40e_vsi_clear_rings(vsi);
 	i40e_vsi_clear(vsi);
 
-- 
cgit v1.2.2


From 43fddb7576fbd543502b01f0c09a3a4171f7e038 Mon Sep 17 00:00:00 2001
From: Anjali Singhai Jain <anjali.singhai@intel.com>
Date: Tue, 11 Feb 2014 08:24:09 +0000
Subject: i40e: Fix a bug in the update logic for FDIR SB filter.

The update filter logic was causing a kernel panic in the original code.
We need to compare the input set to decide whether or not to delete a
filter since we do not have a hash stored. This new design helps fix the issue.

Change-ID: I2462b108e58ca4833312804cda730b4660cc18c9
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 27 +++++++++++++++++++++-----
 1 file changed, 22 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index d34ff31fddd8..718a3e0f7de4 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -1356,6 +1356,24 @@ static int i40e_set_rss_hash_opt(struct i40e_pf *pf, struct ethtool_rxnfc *nfc)
 	return 0;
 }
 
+/**
+ * i40e_match_fdir_input_set - Match a new filter against an existing one
+ * @rule: The filter already added
+ * @input: The new filter to comapre against
+ *
+ * Returns true if the two input set match
+ **/
+static bool i40e_match_fdir_input_set(struct i40e_fdir_filter *rule,
+				      struct i40e_fdir_filter *input)
+{
+	if ((rule->dst_ip[0] != input->dst_ip[0]) ||
+	    (rule->src_ip[0] != input->src_ip[0]) ||
+	    (rule->dst_port != input->dst_port) ||
+	    (rule->src_port != input->src_port))
+		return false;
+	return true;
+}
+
 /**
  * i40e_update_ethtool_fdir_entry - Updates the fdir filter entry
  * @vsi: Pointer to the targeted VSI
@@ -1391,11 +1409,10 @@ static int i40e_update_ethtool_fdir_entry(struct i40e_vsi *vsi,
 
 	/* if there is an old rule occupying our place remove it */
 	if (rule && (rule->fd_id == sw_idx)) {
-		if (!input || (rule->fd_id != input->fd_id)) {
-			cmd->fs.flow_type = rule->flow_type;
-			err = i40e_add_del_fdir_ethtool(vsi, cmd, false);
-		}
-
+		if (input && !i40e_match_fdir_input_set(rule, input))
+			err = i40e_add_del_fdir(vsi, rule, false);
+		else if (!input)
+			err = i40e_add_del_fdir(vsi, rule, false);
 		hlist_del(&rule->fdir_node);
 		kfree(rule);
 		pf->fdir_pf_active_filters--;
-- 
cgit v1.2.2


From 77e29bc6fc814a2283c9dda07d24f2efb53d585c Mon Sep 17 00:00:00 2001
From: Anjali Singhai Jain <anjali.singhai@intel.com>
Date: Tue, 11 Feb 2014 08:24:11 +0000
Subject: i40e/i40evf: Some flow director HW definition fixes

1) Fix a name of the error bit to correctly indicate the error.
2) Added a fd_id field in the 32 byte desc at the place(qw0) where it gets
reported in the programming error desc WB. In a normal data desc
the fd_id field is reported in qw3.

Change-ID: Ide9a24bff7273da5889c36635d629bc3b5212010
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Acked-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Kevin Scott <kevin.c.scott@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_type.h   | 6 +++++-
 drivers/net/ethernet/intel/i40evf/i40e_type.h | 6 +++++-
 2 files changed, 10 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_type.h b/drivers/net/ethernet/intel/i40e/i40e_type.h
index 181a825d3160..5c902f448b1d 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_type.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_type.h
@@ -458,6 +458,10 @@ union i40e_32byte_rx_desc {
 			union {
 				__le32 rss; /* RSS Hash */
 				__le32 fcoe_param; /* FCoE DDP Context id */
+				/* Flow director filter id in case of
+				 * Programming status desc WB
+				 */
+				__le32 fd_id;
 			} hi_dword;
 		} qword0;
 		struct {
@@ -698,7 +702,7 @@ enum i40e_rx_prog_status_desc_prog_id_masks {
 enum i40e_rx_prog_status_desc_error_bits {
 	/* Note: These are predefined bit offsets */
 	I40E_RX_PROG_STATUS_DESC_FD_TBL_FULL_SHIFT	= 0,
-	I40E_RX_PROG_STATUS_DESC_NO_FD_QUOTA_SHIFT	= 1,
+	I40E_RX_PROG_STATUS_DESC_NO_FD_ENTRY_SHIFT	= 1,
 	I40E_RX_PROG_STATUS_DESC_FCOE_TBL_FULL_SHIFT	= 2,
 	I40E_RX_PROG_STATUS_DESC_FCOE_CONFLICT_SHIFT	= 3
 };
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_type.h b/drivers/net/ethernet/intel/i40evf/i40e_type.h
index 092aace2a76c..7189d6f08ddd 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_type.h
+++ b/drivers/net/ethernet/intel/i40evf/i40e_type.h
@@ -464,6 +464,10 @@ union i40e_32byte_rx_desc {
 			union {
 				__le32 rss; /* RSS Hash */
 				__le32 fcoe_param; /* FCoE DDP Context id */
+				/* Flow director filter id in case of
+				 * Programming status desc WB
+				 */
+				__le32 fd_id;
 			} hi_dword;
 		} qword0;
 		struct {
@@ -704,7 +708,7 @@ enum i40e_rx_prog_status_desc_prog_id_masks {
 enum i40e_rx_prog_status_desc_error_bits {
 	/* Note: These are predefined bit offsets */
 	I40E_RX_PROG_STATUS_DESC_FD_TBL_FULL_SHIFT	= 0,
-	I40E_RX_PROG_STATUS_DESC_NO_FD_QUOTA_SHIFT	= 1,
+	I40E_RX_PROG_STATUS_DESC_NO_FD_ENTRY_SHIFT	= 1,
 	I40E_RX_PROG_STATUS_DESC_FCOE_TBL_FULL_SHIFT	= 2,
 	I40E_RX_PROG_STATUS_DESC_FCOE_CONFLICT_SHIFT	= 3
 };
-- 
cgit v1.2.2


From f29eaa3d08d4f0740256253cc6f5d6c7486a3c17 Mon Sep 17 00:00:00 2001
From: Jesse Brandeburg <jesse.brandeburg@intel.com>
Date: Tue, 11 Feb 2014 08:24:12 +0000
Subject: i40e: make string references to q be queue

This cleans up strings for consistency, q is replaced with queue.

Change-ID: Ia5f9dfae9af261f4c24485854264e02363729cf3
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index a3f122eb9f7e..acf0b20a57bc 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -2582,7 +2582,7 @@ static void i40e_configure_msi_and_legacy(struct i40e_vsi *vsi)
 	/* FIRSTQ_INDX = 0, FIRSTQ_TYPE = 0 (rx) */
 	wr32(hw, I40E_PFINT_LNKLST0, 0);
 
-	/* Associate the queue pair to the vector and enable the q int */
+	/* Associate the queue pair to the vector and enable the queue int */
 	val = I40E_QINT_RQCTL_CAUSE_ENA_MASK		      |
 	      (I40E_RX_ITR << I40E_QINT_RQCTL_ITR_INDX_SHIFT) |
 	      (I40E_QUEUE_TYPE_TX << I40E_QINT_TQCTL_NEXTQ_TYPE_SHIFT);
@@ -5442,7 +5442,7 @@ static void i40e_handle_mdd_event(struct i40e_pf *pf)
 		u8 queue = (reg & I40E_GL_MDET_TX_QUEUE_MASK)
 				>> I40E_GL_MDET_TX_QUEUE_SHIFT;
 		dev_info(&pf->pdev->dev,
-			 "Malicious Driver Detection TX event 0x%02x on q %d of function 0x%02x\n",
+			 "Malicious Driver Detection event 0x%02x on TX queue %d of function 0x%02x\n",
 			 event, queue, func);
 		wr32(hw, I40E_GL_MDET_TX, 0xffffffff);
 		mdd_detected = true;
@@ -5456,7 +5456,7 @@ static void i40e_handle_mdd_event(struct i40e_pf *pf)
 		u8 queue = (reg & I40E_GL_MDET_RX_QUEUE_MASK)
 				>> I40E_GL_MDET_RX_QUEUE_SHIFT;
 		dev_info(&pf->pdev->dev,
-			 "Malicious Driver Detection RX event 0x%02x on q %d of function 0x%02x\n",
+			 "Malicious Driver Detection event 0x%02x on RX queue %d of function 0x%02x\n",
 			 event, queue, func);
 		wr32(hw, I40E_GL_MDET_RX, 0xffffffff);
 		mdd_detected = true;
@@ -6882,8 +6882,7 @@ static int i40e_vsi_setup_vectors(struct i40e_vsi *vsi)
 	}
 
 	if (vsi->base_vector) {
-		dev_info(&pf->pdev->dev,
-			 "VSI %d has non-zero base vector %d\n",
+		dev_info(&pf->pdev->dev, "VSI %d has non-zero base vector %d\n",
 			 vsi->seid, vsi->base_vector);
 		return -EEXIST;
 	}
@@ -6902,7 +6901,7 @@ static int i40e_vsi_setup_vectors(struct i40e_vsi *vsi)
 						 vsi->num_q_vectors, vsi->idx);
 	if (vsi->base_vector < 0) {
 		dev_info(&pf->pdev->dev,
-			 "failed to get q tracking for VSI %d, err=%d\n",
+			 "failed to get queue tracking for VSI %d, err=%d\n",
 			 vsi->seid, vsi->base_vector);
 		i40e_vsi_free_q_vectors(vsi);
 		ret = -ENOENT;
-- 
cgit v1.2.2


From 69bfb110fd58185df99a7dbe92a14c0d7ada764f Mon Sep 17 00:00:00 2001
From: Jesse Brandeburg <jesse.brandeburg@intel.com>
Date: Tue, 11 Feb 2014 08:24:13 +0000
Subject: i40e: cleanup strings

This patch cleans up the strings that the driver prints during normal
operation and moves many strings into dev_dbg.  It also cleans up
strings printed during reset.

Change-ID: I1835cc4e3c3b22596182b683284e6bb87eac61b2
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_debugfs.c |  8 ++---
 drivers/net/ethernet/intel/i40e/i40e_main.c    | 47 +++++++++++---------------
 2 files changed, 24 insertions(+), 31 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
index 57fc86496f30..47b9754d1e8e 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
@@ -1467,19 +1467,19 @@ static ssize_t i40e_dbg_command_write(struct file *filp,
 				 pf->msg_enable);
 		}
 	} else if (strncmp(cmd_buf, "pfr", 3) == 0) {
-		dev_info(&pf->pdev->dev, "forcing PFR\n");
+		dev_info(&pf->pdev->dev, "debugfs: forcing PFR\n");
 		i40e_do_reset_safe(pf, (1 << __I40E_PF_RESET_REQUESTED));
 
 	} else if (strncmp(cmd_buf, "corer", 5) == 0) {
-		dev_info(&pf->pdev->dev, "forcing CoreR\n");
+		dev_info(&pf->pdev->dev, "debugfs: forcing CoreR\n");
 		i40e_do_reset_safe(pf, (1 << __I40E_CORE_RESET_REQUESTED));
 
 	} else if (strncmp(cmd_buf, "globr", 5) == 0) {
-		dev_info(&pf->pdev->dev, "forcing GlobR\n");
+		dev_info(&pf->pdev->dev, "debugfs: forcing GlobR\n");
 		i40e_do_reset_safe(pf, (1 << __I40E_GLOBAL_RESET_REQUESTED));
 
 	} else if (strncmp(cmd_buf, "empr", 4) == 0) {
-		dev_info(&pf->pdev->dev, "forcing EMPR\n");
+		dev_info(&pf->pdev->dev, "debugfs: forcing EMPR\n");
 		i40e_do_reset_safe(pf, (1 << __I40E_EMP_RESET_REQUESTED));
 
 	} else if (strncmp(cmd_buf, "read", 4) == 0) {
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index acf0b20a57bc..f7b1753ac565 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -3755,8 +3755,8 @@ static int i40e_vsi_configure_bw_alloc(struct i40e_vsi *vsi, u8 enabled_tc,
 					  NULL);
 	if (aq_ret) {
 		dev_info(&vsi->back->pdev->dev,
-			 "%s: AQ command Config VSI BW allocation per TC failed = %d\n",
-			 __func__, vsi->back->hw.aq.asq_last_status);
+			 "AQ command Config VSI BW allocation per TC failed = %d\n",
+			 vsi->back->hw.aq.asq_last_status);
 		return -EINVAL;
 	}
 
@@ -4364,7 +4364,7 @@ void i40e_do_reset(struct i40e_pf *pf, u32 reset_flags)
 		 * for the warning interrupt will deal with the shutdown
 		 * and recovery of the switch setup.
 		 */
-		dev_info(&pf->pdev->dev, "GlobalR requested\n");
+		dev_dbg(&pf->pdev->dev, "GlobalR requested\n");
 		val = rd32(&pf->hw, I40E_GLGEN_RTRIG);
 		val |= I40E_GLGEN_RTRIG_GLOBR_MASK;
 		wr32(&pf->hw, I40E_GLGEN_RTRIG, val);
@@ -4375,7 +4375,7 @@ void i40e_do_reset(struct i40e_pf *pf, u32 reset_flags)
 		 *
 		 * Same as Global Reset, except does *not* include the MAC/PHY
 		 */
-		dev_info(&pf->pdev->dev, "CoreR requested\n");
+		dev_dbg(&pf->pdev->dev, "CoreR requested\n");
 		val = rd32(&pf->hw, I40E_GLGEN_RTRIG);
 		val |= I40E_GLGEN_RTRIG_CORER_MASK;
 		wr32(&pf->hw, I40E_GLGEN_RTRIG, val);
@@ -4409,7 +4409,7 @@ void i40e_do_reset(struct i40e_pf *pf, u32 reset_flags)
 		 * the switch, since we need to do all the recovery as
 		 * for the Core Reset.
 		 */
-		dev_info(&pf->pdev->dev, "PFR requested\n");
+		dev_dbg(&pf->pdev->dev, "PFR requested\n");
 		i40e_handle_reset_warning(pf);
 
 	} else if (reset_flags & (1 << __I40E_REINIT_REQUESTED)) {
@@ -4458,18 +4458,18 @@ bool i40e_dcb_need_reconfig(struct i40e_pf *pf,
 			   &old_cfg->etscfg.prioritytable,
 			   sizeof(new_cfg->etscfg.prioritytable))) {
 			need_reconfig = true;
-			dev_info(&pf->pdev->dev, "ETS UP2TC changed.\n");
+			dev_dbg(&pf->pdev->dev, "ETS UP2TC changed.\n");
 		}
 
 		if (memcmp(&new_cfg->etscfg.tcbwtable,
 			   &old_cfg->etscfg.tcbwtable,
 			   sizeof(new_cfg->etscfg.tcbwtable)))
-			dev_info(&pf->pdev->dev, "ETS TC BW Table changed.\n");
+			dev_dbg(&pf->pdev->dev, "ETS TC BW Table changed.\n");
 
 		if (memcmp(&new_cfg->etscfg.tsatable,
 			   &old_cfg->etscfg.tsatable,
 			   sizeof(new_cfg->etscfg.tsatable)))
-			dev_info(&pf->pdev->dev, "ETS TSA Table changed.\n");
+			dev_dbg(&pf->pdev->dev, "ETS TSA Table changed.\n");
 	}
 
 	/* Check if PFC configuration has changed */
@@ -4477,7 +4477,7 @@ bool i40e_dcb_need_reconfig(struct i40e_pf *pf,
 		   &old_cfg->pfc,
 		   sizeof(new_cfg->pfc))) {
 		need_reconfig = true;
-		dev_info(&pf->pdev->dev, "PFC config change detected.\n");
+		dev_dbg(&pf->pdev->dev, "PFC config change detected.\n");
 	}
 
 	/* Check if APP Table has changed */
@@ -4485,7 +4485,7 @@ bool i40e_dcb_need_reconfig(struct i40e_pf *pf,
 		   &old_cfg->app,
 		   sizeof(new_cfg->app))) {
 		need_reconfig = true;
-		dev_info(&pf->pdev->dev, "APP Table change detected.\n");
+		dev_dbg(&pf->pdev->dev, "APP Table change detected.\n");
 	}
 
 	return need_reconfig;
@@ -4535,7 +4535,7 @@ static int i40e_handle_lldp_event(struct i40e_pf *pf,
 
 	/* No change detected in DCBX configs */
 	if (!memcmp(&tmp_dcbx_cfg, dcbx_cfg, sizeof(tmp_dcbx_cfg))) {
-		dev_info(&pf->pdev->dev, "No change detected in DCBX configuration.\n");
+		dev_dbg(&pf->pdev->dev, "No change detected in DCBX configuration.\n");
 		goto exit;
 	}
 
@@ -4593,8 +4593,8 @@ static void i40e_handle_lan_overflow_event(struct i40e_pf *pf,
 	struct i40e_vf *vf;
 	u16 vf_id;
 
-	dev_info(&pf->pdev->dev, "%s: Rx Queue Number = %d QTX_CTL=0x%08x\n",
-		 __func__, queue, qtx_ctl);
+	dev_dbg(&pf->pdev->dev, "overflow Rx Queue Number = %d QTX_CTL=0x%08x\n",
+		queue, qtx_ctl);
 
 	/* Queue belongs to VF, find the VF and issue VF reset */
 	if (((qtx_ctl & I40E_QTX_CTL_PFVF_Q_MASK)
@@ -4946,7 +4946,7 @@ static void i40e_clean_adminq_subtask(struct i40e_pf *pf)
 					event.msg_size);
 			break;
 		case i40e_aqc_opc_lldp_update_mib:
-			dev_info(&pf->pdev->dev, "ARQ: Update LLDP MIB event received\n");
+			dev_dbg(&pf->pdev->dev, "ARQ: Update LLDP MIB event received\n");
 #ifdef CONFIG_I40E_DCB
 			rtnl_lock();
 			ret = i40e_handle_lldp_event(pf, &event);
@@ -4954,7 +4954,7 @@ static void i40e_clean_adminq_subtask(struct i40e_pf *pf)
 #endif /* CONFIG_I40E_DCB */
 			break;
 		case i40e_aqc_opc_event_lan_overflow:
-			dev_info(&pf->pdev->dev, "ARQ LAN queue overflow event received\n");
+			dev_dbg(&pf->pdev->dev, "ARQ LAN queue overflow event received\n");
 			i40e_handle_lan_overflow_event(pf, &event);
 			break;
 		case i40e_aqc_opc_send_msg_to_peer:
@@ -5231,7 +5231,7 @@ static int i40e_prep_for_reset(struct i40e_pf *pf)
 	if (test_and_set_bit(__I40E_RESET_RECOVERY_PENDING, &pf->state))
 		return 0;
 
-	dev_info(&pf->pdev->dev, "Tearing down internal switch for reset\n");
+	dev_dbg(&pf->pdev->dev, "Tearing down internal switch for reset\n");
 
 	if (i40e_check_asq_alive(hw))
 		i40e_vc_notify_reset(pf);
@@ -5278,7 +5278,7 @@ static void i40e_reset_and_rebuild(struct i40e_pf *pf, bool reinit)
 
 	if (test_bit(__I40E_DOWN, &pf->state))
 		goto end_core_reset;
-	dev_info(&pf->pdev->dev, "Rebuilding internal switch\n");
+	dev_dbg(&pf->pdev->dev, "Rebuilding internal switch\n");
 
 	/* rebuild the basics for the AdminQ, HMC, and initial HW switch */
 	ret = i40e_init_adminq(&pf->hw);
@@ -5328,7 +5328,7 @@ static void i40e_reset_and_rebuild(struct i40e_pf *pf, bool reinit)
 	 * try to recover minimal use by getting the basic PF VSI working.
 	 */
 	if (pf->vsi[pf->lan_vsi]->uplink_seid != pf->mac_seid) {
-		dev_info(&pf->pdev->dev, "attempting to rebuild switch\n");
+		dev_dbg(&pf->pdev->dev, "attempting to rebuild switch\n");
 		/* find the one VEB connected to the MAC, and find orphans */
 		for (v = 0; v < I40E_MAX_VEB; v++) {
 			if (!pf->veb[v])
@@ -5393,7 +5393,7 @@ static void i40e_reset_and_rebuild(struct i40e_pf *pf, bool reinit)
 	dv.subbuild_version = 0;
 	i40e_aq_send_driver_version(&pf->hw, &dv, NULL);
 
-	dev_info(&pf->pdev->dev, "PF reset done\n");
+	dev_info(&pf->pdev->dev, "reset complete\n");
 
 end_core_reset:
 	clear_bit(__I40E_RESET_RECOVERY_PENDING, &pf->state);
@@ -6293,12 +6293,8 @@ static int i40e_sw_init(struct i40e_pf *pf)
 	    (pf->hw.func_caps.fd_filters_best_effort > 0)) {
 		pf->flags |= I40E_FLAG_FD_ATR_ENABLED;
 		pf->atr_sample_rate = I40E_DEFAULT_ATR_SAMPLE_RATE;
-		dev_info(&pf->pdev->dev,
-			"Flow Director ATR mode Enabled\n");
 		if (!(pf->flags & I40E_FLAG_MFP_ENABLED)) {
 			pf->flags |= I40E_FLAG_FD_SB_ENABLED;
-			dev_info(&pf->pdev->dev,
-				 "Flow Director Side Band mode Enabled\n");
 		} else {
 			dev_info(&pf->pdev->dev,
 				 "Flow Director Side Band mode Disabled in MFP mode\n");
@@ -6322,9 +6318,6 @@ static int i40e_sw_init(struct i40e_pf *pf)
 		pf->num_req_vfs = min_t(int,
 					pf->hw.func_caps.num_vfs,
 					I40E_MAX_VF_COUNT);
-		dev_info(&pf->pdev->dev,
-			 "Number of VFs being requested for PF[%d] = %d\n",
-			 pf->hw.pf_id, pf->num_req_vfs);
 	}
 #endif /* CONFIG_PCI_IOV */
 	pf->eeprom_version = 0xDEAD;
@@ -8131,7 +8124,7 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	i40e_set_pci_config_data(hw, link_status);
 
-	dev_info(&pdev->dev, "PCI Express: %s %s\n",
+	dev_info(&pdev->dev, "PCI-Express: %s %s\n",
 		(hw->bus.speed == i40e_bus_speed_8000 ? "Speed 8.0GT/s" :
 		 hw->bus.speed == i40e_bus_speed_5000 ? "Speed 5.0GT/s" :
 		 hw->bus.speed == i40e_bus_speed_2500 ? "Speed 2.5GT/s" :
-- 
cgit v1.2.2


From 0c22b3dd68a67e4046616859643a08ce44269fc3 Mon Sep 17 00:00:00 2001
From: Jesse Brandeburg <jesse.brandeburg@intel.com>
Date: Tue, 11 Feb 2014 08:24:14 +0000
Subject: i40e: simplified init string

In a similar way to how ixgbe works, print a short one-line string
showing what features and number of queues the driver and hardware has
enabled at probe time.

Example (wrapped for the commit message):
i40e 0000:06:00.1: Features: PF-id[1] VFs: 64 VSIs: 66 QP: 32 FDir RSS
ATR NTUPLE DCB

Change-ID: I177bf7f93d1c4c921529c92fdf66e614f6b4f755
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 41 +++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index f7b1753ac565..79be80871f67 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -7851,6 +7851,44 @@ static int i40e_setup_pf_filter_control(struct i40e_pf *pf)
 	return 0;
 }
 
+#define INFO_STRING_LEN 255
+static void i40e_print_features(struct i40e_pf *pf)
+{
+	struct i40e_hw *hw = &pf->hw;
+	char *buf, *string;
+
+	string = kzalloc(INFO_STRING_LEN, GFP_KERNEL);
+	if (!string) {
+		dev_err(&pf->pdev->dev, "Features string allocation failed\n");
+		return;
+	}
+
+	buf = string;
+
+	buf += sprintf(string, "Features: PF-id[%d] ", hw->pf_id);
+#ifdef CONFIG_PCI_IOV
+	buf += sprintf(buf, "VFs: %d ", pf->num_req_vfs);
+#endif
+	buf += sprintf(buf, "VSIs: %d QP: %d ", pf->hw.func_caps.num_vsis,
+		       pf->vsi[pf->lan_vsi]->num_queue_pairs);
+
+	if (pf->flags & I40E_FLAG_RSS_ENABLED)
+		buf += sprintf(buf, "RSS ");
+	buf += sprintf(buf, "FDir ");
+	if (pf->flags & I40E_FLAG_FD_ATR_ENABLED)
+		buf += sprintf(buf, "ATR ");
+	if (pf->flags & I40E_FLAG_FD_SB_ENABLED)
+		buf += sprintf(buf, "NTUPLE ");
+	if (pf->flags & I40E_FLAG_DCB_ENABLED)
+		buf += sprintf(buf, "DCB ");
+	if (pf->flags & I40E_FLAG_PTP)
+		buf += sprintf(buf, "PTP ");
+
+	BUG_ON(buf > (string + INFO_STRING_LEN));
+	dev_info(&pf->pdev->dev, "%s\n", string);
+	kfree(string);
+}
+
 /**
  * i40e_probe - Device initialization routine
  * @pdev: PCI device information struct
@@ -8141,6 +8179,9 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		dev_warn(&pdev->dev, "Please move the device to a different PCI-e link with more lanes and/or higher transfer rate.\n");
 	}
 
+	/* print a string summarizing features */
+	i40e_print_features(pf);
+
 	return 0;
 
 	/* Unwind what we've done if something failed in the setup */
-- 
cgit v1.2.2


From fdfd943e9bbbfafe8e826b57ef7bb2a6143b3fda Mon Sep 17 00:00:00 2001
From: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Date: Tue, 11 Feb 2014 08:24:15 +0000
Subject: i40e: Fix function comments

Correct misleading function comment.

Change-ID: I3f66cff5cc00250a285756b6500a58fad8eba4b5
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 79be80871f67..63776ea5092c 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -1985,7 +1985,7 @@ static int i40e_vlan_rx_add_vid(struct net_device *netdev,
  * @netdev: network interface to be adjusted
  * @vid: vlan id to be removed
  *
- * net_device_ops implementation for adding vlan ids
+ * net_device_ops implementation for removing vlan ids
  **/
 static int i40e_vlan_rx_kill_vid(struct net_device *netdev,
 				 __always_unused __be16 proto, u16 vid)
-- 
cgit v1.2.2


From 61dade7e9201162cba683cff103cebbdf06655d4 Mon Sep 17 00:00:00 2001
From: Anjali Singhai Jain <anjali.singhai@intel.com>
Date: Tue, 11 Feb 2014 08:26:28 +0000
Subject: i40e: Define a new state variable to keep track of feature auto
 disable

This variable is a bit mask. It is needed to differentiate between
user enforced feature disables and auto disable of features due to
HW resource limitations.

Change-ID: Ib4b4f6ae1bb2668c12e482d2555100bc8ad713d5
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e.h | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
index 838b69b74edf..a19165395b7f 100644
--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -263,6 +263,9 @@ struct i40e_pf {
 #define I40E_FLAG_VXLAN_FILTER_SYNC            (u64)(1 << 27)
 #endif
 
+	/* tracks features that get auto disabled by errors */
+	u64 auto_disable_flags;
+
 	bool stat_offsets_loaded;
 	struct i40e_hw_port_stats stats;
 	struct i40e_hw_port_stats stats_offsets;
-- 
cgit v1.2.2


From 55a5e60b9f583f64a6c95cfe869dd2d65ae53a95 Mon Sep 17 00:00:00 2001
From: Anjali Singhai Jain <anjali.singhai@intel.com>
Date: Wed, 12 Feb 2014 06:33:25 +0000
Subject: i40e: Add code to handle FD table full condition

Add code to enforce the following policy:
- If the HW reports filter programming error, we check if it's due to a
  full table.
- If so, we go ahead and turn off new rule addition for ATR and then SB
  in that order.
- We monitor the programmed filter count, if enough room is created due
  to filter deletion/reset, we then re-enable SB and ATR new rule addition.

Change-ID: I69d24b29e5c45bc4fa861258e11c2fa7b8868748
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e.h         |  7 ++-
 drivers/net/ethernet/intel/i40e/i40e_debugfs.c | 17 ++++++--
 drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 10 ++++-
 drivers/net/ethernet/intel/i40e/i40e_main.c    | 58 ++++++++++++++++++++++++-
 drivers/net/ethernet/intel/i40e/i40e_txrx.c    | 60 ++++++++++++++++++++++----
 5 files changed, 135 insertions(+), 17 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
index a19165395b7f..bd1b4690a608 100644
--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -152,7 +152,10 @@ struct i40e_lump_tracking {
 };
 
 #define I40E_DEFAULT_ATR_SAMPLE_RATE	20
-#define I40E_FDIR_MAX_RAW_PACKET_SIZE   512
+#define I40E_FDIR_MAX_RAW_PACKET_SIZE	512
+#define I40E_FDIR_BUFFER_FULL_MARGIN	10
+#define I40E_FDIR_BUFFER_HEAD_ROOM	200
+
 struct i40e_fdir_filter {
 	struct hlist_node fdir_node;
 	/* filter ipnut set */
@@ -553,6 +556,8 @@ int i40e_program_fdir_filter(struct i40e_fdir_filter *fdir_data, u8 *raw_packet,
 			     struct i40e_pf *pf, bool add);
 int i40e_add_del_fdir(struct i40e_vsi *vsi,
 		      struct i40e_fdir_filter *input, bool add);
+void i40e_fdir_check_and_reenable(struct i40e_pf *pf);
+int i40e_get_current_fd_count(struct i40e_pf *pf);
 void i40e_set_ethtool_ops(struct net_device *netdev);
 struct i40e_mac_filter *i40e_add_filter(struct i40e_vsi *vsi,
 					u8 *macaddr, s16 vlan,
diff --git a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
index 47b9754d1e8e..afd43d7973fa 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
@@ -1011,10 +1011,12 @@ static void i40e_dbg_dump_veb_all(struct i40e_pf *pf)
  **/
 static void i40e_dbg_cmd_fd_ctrl(struct i40e_pf *pf, u64 flag, bool enable)
 {
-	if (enable)
+	if (enable) {
 		pf->flags |= flag;
-	else
+	} else {
 		pf->flags &= ~flag;
+		pf->auto_disable_flags |= flag;
+	}
 	dev_info(&pf->pdev->dev, "requesting a pf reset\n");
 	i40e_do_reset_safe(pf, (1 << __I40E_PF_RESET_REQUESTED));
 }
@@ -1670,6 +1672,15 @@ static ssize_t i40e_dbg_command_write(struct file *filp,
 		bool add = false;
 		int ret;
 
+		if (!(pf->flags & I40E_FLAG_FD_SB_ENABLED))
+			goto command_write_done;
+
+		if (strncmp(cmd_buf, "add", 3) == 0)
+			add = true;
+
+		if (add && (pf->auto_disable_flags & I40E_FLAG_FD_SB_ENABLED))
+			goto command_write_done;
+
 		asc_packet = kzalloc(I40E_FDIR_MAX_RAW_PACKET_SIZE,
 				     GFP_KERNEL);
 		if (!asc_packet)
@@ -1684,8 +1695,6 @@ static ssize_t i40e_dbg_command_write(struct file *filp,
 			goto command_write_done;
 		}
 
-		if (strncmp(cmd_buf, "add", 3) == 0)
-			add = true;
 		cnt = sscanf(&cmd_buf[13],
 			     "%hx %2hhx %2hhx %hx %2hhx %2hhx %hx %x %hd %511s",
 			     &fd_data.q_index,
diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index 718a3e0f7de4..8ee224fdc1d1 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -1460,6 +1460,7 @@ static int i40e_del_fdir_entry(struct i40e_vsi *vsi,
 
 	ret = i40e_update_ethtool_fdir_entry(vsi, NULL, fsp->location, cmd);
 
+	i40e_fdir_check_and_reenable(pf);
 	return ret;
 }
 
@@ -1483,9 +1484,16 @@ static int i40e_add_del_fdir_ethtool(struct i40e_vsi *vsi,
 	if (!vsi)
 		return -EINVAL;
 
-	fsp = (struct ethtool_rx_flow_spec *)&cmd->fs;
 	pf = vsi->back;
 
+	if (!(pf->flags & I40E_FLAG_FD_SB_ENABLED))
+		return -EOPNOTSUPP;
+
+	if (add && (pf->auto_disable_flags & I40E_FLAG_FD_SB_ENABLED))
+		return -ENOSPC;
+
+	fsp = (struct ethtool_rx_flow_spec *)&cmd->fs;
+
 	if (fsp->location >= (pf->hw.func_caps.fd_filters_best_effort +
 			      pf->hw.func_caps.fd_filters_guaranteed)) {
 		return -EINVAL;
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 63776ea5092c..6185856689bc 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -2436,6 +2436,9 @@ static void i40e_fdir_filter_restore(struct i40e_vsi *vsi)
 	struct i40e_pf *pf = vsi->back;
 	struct hlist_node *node;
 
+	if (!(pf->flags & I40E_FLAG_FD_SB_ENABLED))
+		return;
+
 	hlist_for_each_entry_safe(filter, node,
 				  &pf->fdir_filter_list, fdir_node) {
 		i40e_add_del_fdir(vsi, filter, true);
@@ -4623,6 +4626,54 @@ static void i40e_service_event_complete(struct i40e_pf *pf)
 	clear_bit(__I40E_SERVICE_SCHED, &pf->state);
 }
 
+/**
+ * i40e_get_current_fd_count - Get the count of FD filters programmed in the HW
+ * @pf: board private structure
+ **/
+int i40e_get_current_fd_count(struct i40e_pf *pf)
+{
+	int val, fcnt_prog;
+	val = rd32(&pf->hw, I40E_PFQF_FDSTAT);
+	fcnt_prog = (val & I40E_PFQF_FDSTAT_GUARANT_CNT_MASK) +
+		    ((val & I40E_PFQF_FDSTAT_BEST_CNT_MASK) >>
+		      I40E_PFQF_FDSTAT_BEST_CNT_SHIFT);
+	return fcnt_prog;
+}
+
+/**
+ * i40e_fdir_check_and_reenable - Function to reenabe FD ATR or SB if disabled
+ * @pf: board private structure
+ **/
+void i40e_fdir_check_and_reenable(struct i40e_pf *pf)
+{
+	u32 fcnt_prog, fcnt_avail;
+
+	/* Check if, FD SB or ATR was auto disabled and if there is enough room
+	 * to re-enable
+	 */
+	if ((pf->flags & I40E_FLAG_FD_ATR_ENABLED) &&
+	    (pf->flags & I40E_FLAG_FD_SB_ENABLED))
+		return;
+	fcnt_prog = i40e_get_current_fd_count(pf);
+	fcnt_avail = pf->hw.fdir_shared_filter_count +
+					       pf->fdir_pf_filter_count;
+	if (fcnt_prog < (fcnt_avail - I40E_FDIR_BUFFER_HEAD_ROOM)) {
+		if ((pf->flags & I40E_FLAG_FD_SB_ENABLED) &&
+		    (pf->auto_disable_flags & I40E_FLAG_FD_SB_ENABLED)) {
+			pf->auto_disable_flags &= ~I40E_FLAG_FD_SB_ENABLED;
+			dev_info(&pf->pdev->dev, "FD Sideband/ntuple is being enabled since we have space in the table now\n");
+		}
+	}
+	/* Wait for some more space to be available to turn on ATR */
+	if (fcnt_prog < (fcnt_avail - I40E_FDIR_BUFFER_HEAD_ROOM * 2)) {
+		if ((pf->flags & I40E_FLAG_FD_ATR_ENABLED) &&
+		    (pf->auto_disable_flags & I40E_FLAG_FD_ATR_ENABLED)) {
+			pf->auto_disable_flags &= ~I40E_FLAG_FD_ATR_ENABLED;
+			dev_info(&pf->pdev->dev, "ATR is being enabled since we have space in the table now\n");
+		}
+	}
+}
+
 /**
  * i40e_fdir_reinit_subtask - Worker thread to reinit FDIR filter table
  * @pf: board private structure
@@ -4632,11 +4683,14 @@ static void i40e_fdir_reinit_subtask(struct i40e_pf *pf)
 	if (!(pf->flags & I40E_FLAG_FDIR_REQUIRES_REINIT))
 		return;
 
-	pf->flags &= ~I40E_FLAG_FDIR_REQUIRES_REINIT;
-
 	/* if interface is down do nothing */
 	if (test_bit(__I40E_DOWN, &pf->state))
 		return;
+	i40e_fdir_check_and_reenable(pf);
+
+	if ((pf->flags & I40E_FLAG_FD_ATR_ENABLED) &&
+	    (pf->flags & I40E_FLAG_FD_SB_ENABLED))
+		pf->flags &= ~I40E_FLAG_FDIR_REQUIRES_REINIT;
 }
 
 /**
diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index 2081bdb214e5..daa3b295ff3d 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -430,23 +430,61 @@ int i40e_add_del_fdir(struct i40e_vsi *vsi,
 /**
  * i40e_fd_handle_status - check the Programming Status for FD
  * @rx_ring: the Rx ring for this descriptor
- * @qw: the descriptor data
+ * @rx_desc: the Rx descriptor for programming Status, not a packet descriptor.
  * @prog_id: the id originally used for programming
  *
  * This is used to verify if the FD programming or invalidation
  * requested by SW to the HW is successful or not and take actions accordingly.
  **/
-static void i40e_fd_handle_status(struct i40e_ring *rx_ring, u32 qw, u8 prog_id)
+static void i40e_fd_handle_status(struct i40e_ring *rx_ring,
+				  union i40e_rx_desc *rx_desc, u8 prog_id)
 {
-	struct pci_dev *pdev = rx_ring->vsi->back->pdev;
+	struct i40e_pf *pf = rx_ring->vsi->back;
+	struct pci_dev *pdev = pf->pdev;
+	u32 fcnt_prog, fcnt_avail;
 	u32 error;
+	u64 qw;
 
+	qw = le64_to_cpu(rx_desc->wb.qword1.status_error_len);
 	error = (qw & I40E_RX_PROG_STATUS_DESC_QW1_ERROR_MASK) >>
 		I40E_RX_PROG_STATUS_DESC_QW1_ERROR_SHIFT;
 
-	/* for now just print the Status */
-	dev_info(&pdev->dev, "FD programming id %02x, Status %08x\n",
-		 prog_id, error);
+	if (error == (0x1 << I40E_RX_PROG_STATUS_DESC_FD_TBL_FULL_SHIFT)) {
+		dev_warn(&pdev->dev, "ntuple filter loc = %d, could not be added\n",
+			 rx_desc->wb.qword0.hi_dword.fd_id);
+
+		/* filter programming failed most likely due to table full */
+		fcnt_prog = i40e_get_current_fd_count(pf);
+		fcnt_avail = pf->hw.fdir_shared_filter_count +
+						       pf->fdir_pf_filter_count;
+
+		/* If ATR is running fcnt_prog can quickly change,
+		 * if we are very close to full, it makes sense to disable
+		 * FD ATR/SB and then re-enable it when there is room.
+		 */
+		if (fcnt_prog >= (fcnt_avail - I40E_FDIR_BUFFER_FULL_MARGIN)) {
+			/* Turn off ATR first */
+			if (pf->flags | I40E_FLAG_FD_ATR_ENABLED) {
+				pf->flags &= ~I40E_FLAG_FD_ATR_ENABLED;
+				dev_warn(&pdev->dev, "FD filter space full, ATR for further flows will be turned off\n");
+				pf->auto_disable_flags |=
+						       I40E_FLAG_FD_ATR_ENABLED;
+				pf->flags |= I40E_FLAG_FDIR_REQUIRES_REINIT;
+			} else if (pf->flags | I40E_FLAG_FD_SB_ENABLED) {
+				pf->flags &= ~I40E_FLAG_FD_SB_ENABLED;
+				dev_warn(&pdev->dev, "FD filter space full, new ntuple rules will not be added\n");
+				pf->auto_disable_flags |=
+							I40E_FLAG_FD_SB_ENABLED;
+				pf->flags |= I40E_FLAG_FDIR_REQUIRES_REINIT;
+			}
+		} else {
+			dev_info(&pdev->dev, "FD filter programming error");
+		}
+	} else if (error ==
+			  (0x1 << I40E_RX_PROG_STATUS_DESC_NO_FD_ENTRY_SHIFT)) {
+		netdev_info(rx_ring->vsi->netdev, "ntuple filter loc = %d, could not be removed\n",
+			    rx_desc->wb.qword0.hi_dword.fd_id);
+	}
 }
 
 /**
@@ -843,7 +881,7 @@ static void i40e_clean_programming_status(struct i40e_ring *rx_ring,
 		  I40E_RX_PROG_STATUS_DESC_QW1_PROGID_SHIFT;
 
 	if (id == I40E_RX_PROG_STATUS_DESC_FD_FILTER_STATUS)
-		i40e_fd_handle_status(rx_ring, qw, id);
+		i40e_fd_handle_status(rx_ring, rx_desc, id);
 }
 
 /**
@@ -1536,8 +1574,6 @@ static void i40e_atr(struct i40e_ring *tx_ring, struct sk_buff *skb,
 	if (!tx_ring->atr_sample_rate)
 		return;
 
-	tx_ring->atr_count++;
-
 	/* snag network header to get L4 type and address */
 	hdr.network = skb_network_header(skb);
 
@@ -1559,6 +1595,12 @@ static void i40e_atr(struct i40e_ring *tx_ring, struct sk_buff *skb,
 
 	th = (struct tcphdr *)(hdr.network + hlen);
 
+	/* Due to lack of space, no more new filters can be programmed */
+	if (th->syn && (pf->auto_disable_flags & I40E_FLAG_FD_ATR_ENABLED))
+		return;
+
+	tx_ring->atr_count++;
+
 	/* sample on all syn/fin packets or once every atr sample rate */
 	if (!th->fin && !th->syn && (tx_ring->atr_count < tx_ring->atr_sample_rate))
 		return;
-- 
cgit v1.2.2


From ca64fa4e7eda5d9e2b5f424e901983b86ba0fc49 Mon Sep 17 00:00:00 2001
From: Anjali Singhai Jain <anjali.singhai@intel.com>
Date: Tue, 11 Feb 2014 08:26:30 +0000
Subject: i40e: Bug fix for FDIR replay logic

The FDIR replay logic was being run a little too soon (before the
queues were enabled) and hence the tail bump was not effective till
a later transaction happened on the queue.

Change-ID: Icfd7cd2e79fc3cae3cbd3f703a2b3a148b4e7bf6
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 6185856689bc..669715bb3400 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -2456,8 +2456,6 @@ static int i40e_vsi_configure(struct i40e_vsi *vsi)
 	i40e_set_vsi_rx_mode(vsi);
 	i40e_restore_vlan(vsi);
 	i40e_vsi_config_dcb_rings(vsi);
-	if (vsi->type == I40E_VSI_FDIR)
-		i40e_fdir_filter_restore(vsi);
 	err = i40e_vsi_configure_tx(vsi);
 	if (!err)
 		err = i40e_vsi_configure_rx(vsi);
@@ -4088,6 +4086,10 @@ static int i40e_up_complete(struct i40e_vsi *vsi)
 	} else if (vsi->netdev) {
 		netdev_info(vsi->netdev, "NIC Link is Down\n");
 	}
+
+	/* replay FDIR SB filters */
+	if (vsi->type == I40E_VSI_FDIR)
+		i40e_fdir_filter_restore(vsi);
 	i40e_service_event_schedule(pf);
 
 	return 0;
-- 
cgit v1.2.2


From c0c289759c815a67f176d6f8fa0e44a97f27e46d Mon Sep 17 00:00:00 2001
From: Anjali Singhai Jain <anjali.singhai@intel.com>
Date: Wed, 12 Feb 2014 01:45:34 +0000
Subject: i40e: Let MDD events be handled by MDD handler

We have a separate handler for MDD events, a generic reset is not required.

Change-ID: I77858e2d479e4e65c52aede67109464649ea0253
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 669715bb3400..54e146227654 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -2892,8 +2892,7 @@ static irqreturn_t i40e_intr(int irq, void *data)
 			 icr0_remaining);
 		if ((icr0_remaining & I40E_PFINT_ICR0_PE_CRITERR_MASK) ||
 		    (icr0_remaining & I40E_PFINT_ICR0_PCI_EXCEPTION_MASK) ||
-		    (icr0_remaining & I40E_PFINT_ICR0_ECC_ERR_MASK) ||
-		    (icr0_remaining & I40E_PFINT_ICR0_MAL_DETECT_MASK)) {
+		    (icr0_remaining & I40E_PFINT_ICR0_ECC_ERR_MASK)) {
 			dev_info(&pf->pdev->dev, "device will be reset\n");
 			set_bit(__I40E_PF_RESET_REQUESTED, &pf->state);
 			i40e_service_event_schedule(pf);
-- 
cgit v1.2.2


From 9347eb771ece4fda0ad78c1c991f020af17abcb8 Mon Sep 17 00:00:00 2001
From: Mitch Williams <mitch.a.williams@intel.com>
Date: Tue, 11 Feb 2014 08:26:32 +0000
Subject: i40e/i40evf: Use correct number of VF vectors

Now that the 2.4 firmware reports the correct number of MSI-X vectors,
use this value correctly when communicating with the VF, and when
setting up the interrupt linked list.

The PF has always reported the correct number of MSI-X vectors, so we
should never increment the value in the vf driver.

Change-ID: Ifeefc631c321390192219ce2af9ada6180c1492f
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 9 +++++----
 drivers/net/ethernet/intel/i40evf/i40evf_main.c    | 2 +-
 2 files changed, 6 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index 42cc6ba88005..7839343b967b 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -69,7 +69,7 @@ static inline bool i40e_vc_isvalid_vector_id(struct i40e_vf *vf, u8 vector_id)
 {
 	struct i40e_pf *pf = vf->pf;
 
-	return vector_id <= pf->hw.func_caps.num_msix_vectors_vf;
+	return vector_id < pf->hw.func_caps.num_msix_vectors_vf;
 }
 
 /***********************vf resource mgmt routines*****************/
@@ -126,8 +126,8 @@ static void i40e_config_irq_link_list(struct i40e_vf *vf, u16 vsi_idx,
 		reg_idx = I40E_VPINT_LNKLST0(vf->vf_id);
 	else
 		reg_idx = I40E_VPINT_LNKLSTN(
-					   (pf->hw.func_caps.num_msix_vectors_vf
-					      * vf->vf_id) + (vector_id - 1));
+		     ((pf->hw.func_caps.num_msix_vectors_vf - 1) * vf->vf_id) +
+		     (vector_id - 1));
 
 	if (vecmap->rxq_map == 0 && vecmap->txq_map == 0) {
 		/* Special case - No queues mapped on this vector */
@@ -506,7 +506,8 @@ static void i40e_free_vf_res(struct i40e_vf *vf)
 		vf->lan_vsi_index = 0;
 		vf->lan_vsi_id = 0;
 	}
-	msix_vf = pf->hw.func_caps.num_msix_vectors_vf + 1;
+	msix_vf = pf->hw.func_caps.num_msix_vectors_vf;
+
 	/* disable interrupts so the VF starts in a known state */
 	for (i = 0; i < msix_vf; i++) {
 		/* format is same for both registers */
diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index 11d0b61510b0..8daab3aacdc3 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -1141,7 +1141,7 @@ static int i40evf_set_interrupt_capability(struct i40evf_adapter *adapter)
 	 * (roughly) twice the number of vectors as there are CPU's.
 	 */
 	v_budget = min(pairs, (int)(num_online_cpus() * 2)) + NONQ_VECS;
-	v_budget = min(v_budget, (int)adapter->vf_res->max_vectors + 1);
+	v_budget = min(v_budget, (int)adapter->vf_res->max_vectors);
 
 	/* A failure in MSI-X entry allocation isn't fatal, but it does
 	 * mean we disable MSI-X capabilities of the adapter.
-- 
cgit v1.2.2


From 6494294f277fdef1409b844b3d6eb1439c3fad8c Mon Sep 17 00:00:00 2001
From: Mitch Williams <mitch.a.williams@intel.com>
Date: Tue, 11 Feb 2014 08:26:33 +0000
Subject: i40e/i40evf: Use dma_set_mask_and_coherent

In Linux 3.13, dma_set_mask_and_coherent was introduced, and we have
been encouraged to use it. It simplifies the DMA mapping code a bit as
well.

Change-ID: I66e340245af7d0dedfa8b40fec1f5e352754432e
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Catherine Sullivan  <catherine.sullivan@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c     | 16 ++++++----------
 drivers/net/ethernet/intel/i40evf/i40evf_main.c | 17 ++++++-----------
 2 files changed, 12 insertions(+), 21 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 54e146227654..7379e5a9126b 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -7970,16 +7970,12 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		return err;
 
 	/* set up for high or low dma */
-	if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) {
-		/* coherent mask for the same size will always succeed if
-		 * dma_set_mask does
-		 */
-		dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
-	} else if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(32))) {
-		dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
-	} else {
-		dev_err(&pdev->dev, "DMA configuration failed: %d\n", err);
-		err = -EIO;
+	err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
+	if (err)
+		err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+	if (err) {
+		dev_err(&pdev->dev,
+			"DMA configuration failed: 0x%x\n", err);
 		goto err_dma;
 	}
 
diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index 8daab3aacdc3..d62e27f6e83a 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -2182,17 +2182,12 @@ static int i40evf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (err)
 		return err;
 
-	if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) {
-		/* coherent mask for the same size will always succeed if
-		 * dma_set_mask does
-		 */
-		dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
-	} else if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(32))) {
-		dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
-	} else {
-		dev_err(&pdev->dev, "%s: DMA configuration failed: %d\n",
-			 __func__, err);
-		err = -EIO;
+	err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
+	if (err)
+		err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+	if (err) {
+		dev_err(&pdev->dev,
+			"DMA configuration failed: 0x%x\n", err);
 		goto err_dma;
 	}
 
-- 
cgit v1.2.2


From 376b7bd3558eaf12d3e5c24aa71d0c162d2701fd Mon Sep 17 00:00:00 2001
From: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Date: Fri, 14 Mar 2014 21:23:57 +0100
Subject: ieee802154: rename struct ieee802154_addr to *_sa

The struct as currently defined uses host byte order for some fields,
and most big endian/EUI display byte order for other fields. Inside the
stack, endianness should ideally match network byte order where possible
to minimize the number of byteswaps done in critical paths, but this
patch does not address this; it is only preparatory.

Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ieee802154/fakehard.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ieee802154/fakehard.c b/drivers/net/ieee802154/fakehard.c
index bf0d55e2dd63..06a400f10565 100644
--- a/drivers/net/ieee802154/fakehard.c
+++ b/drivers/net/ieee802154/fakehard.c
@@ -119,7 +119,7 @@ static u8 fake_get_dsn(const struct net_device *dev)
  *       802.15.4-2006 document.
  */
 static int fake_assoc_req(struct net_device *dev,
-		struct ieee802154_addr *addr, u8 channel, u8 page, u8 cap)
+		struct ieee802154_addr_sa *addr, u8 channel, u8 page, u8 cap)
 {
 	struct wpan_phy *phy = fake_to_phy(dev);
 
@@ -149,7 +149,7 @@ static int fake_assoc_req(struct net_device *dev,
  *       802.15.4-2006 document.
  */
 static int fake_assoc_resp(struct net_device *dev,
-		struct ieee802154_addr *addr, u16 short_addr, u8 status)
+		struct ieee802154_addr_sa *addr, u16 short_addr, u8 status)
 {
 	return 0;
 }
@@ -167,7 +167,7 @@ static int fake_assoc_resp(struct net_device *dev,
  *       document, with the reason described in 7.3.3.2.
  */
 static int fake_disassoc_req(struct net_device *dev,
-		struct ieee802154_addr *addr, u8 reason)
+		struct ieee802154_addr_sa *addr, u8 reason)
 {
 	return ieee802154_nl_disassoc_confirm(dev, IEEE802154_SUCCESS);
 }
@@ -191,10 +191,10 @@ static int fake_disassoc_req(struct net_device *dev,
  * Note: This is in section 7.5.2.3 of the IEEE 802.15.4-2006
  * document, with 7.3.8 describing coordinator realignment.
  */
-static int fake_start_req(struct net_device *dev, struct ieee802154_addr *addr,
-				u8 channel, u8 page,
-				u8 bcn_ord, u8 sf_ord, u8 pan_coord, u8 blx,
-				u8 coord_realign)
+static int fake_start_req(struct net_device *dev,
+			  struct ieee802154_addr_sa *addr, u8 channel, u8 page,
+			  u8 bcn_ord, u8 sf_ord, u8 pan_coord, u8 blx,
+			  u8 coord_realign)
 {
 	struct wpan_phy *phy = fake_to_phy(dev);
 
-- 
cgit v1.2.2


From b70ab2e87f17176d18f67ef331064441a032b5f3 Mon Sep 17 00:00:00 2001
From: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Date: Fri, 14 Mar 2014 21:23:59 +0100
Subject: ieee802154: enforce consistent endianness in the 802.15.4 stack

Enable sparse warnings about endianness, replace the remaining fields
regarding network operations without explicit endianness annotations
with such that are annotated, and propagate this through the entire
stack.

Uses of ieee802154_addr_sa are not changed yet, this patch is only
concerned with all other fields (such as address filters, operation
parameters and the likes).

Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ieee802154/at86rf230.c | 25 +++++++++++++------------
 drivers/net/ieee802154/fakehard.c  | 14 +++++++-------
 drivers/net/ieee802154/mrf24j40.c  | 17 +++++++++--------
 3 files changed, 29 insertions(+), 27 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index b8e732121a85..934a12c03552 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -745,30 +745,31 @@ at86rf230_set_hw_addr_filt(struct ieee802154_dev *dev,
 	struct at86rf230_local *lp = dev->priv;
 
 	if (changed & IEEE802515_AFILT_SADDR_CHANGED) {
+		u16 addr = le16_to_cpu(filt->short_addr);
+
 		dev_vdbg(&lp->spi->dev,
 			"at86rf230_set_hw_addr_filt called for saddr\n");
-		__at86rf230_write(lp, RG_SHORT_ADDR_0, filt->short_addr);
-		__at86rf230_write(lp, RG_SHORT_ADDR_1, filt->short_addr >> 8);
+		__at86rf230_write(lp, RG_SHORT_ADDR_0, addr);
+		__at86rf230_write(lp, RG_SHORT_ADDR_1, addr >> 8);
 	}
 
 	if (changed & IEEE802515_AFILT_PANID_CHANGED) {
+		u16 pan = le16_to_cpu(filt->pan_id);
+
 		dev_vdbg(&lp->spi->dev,
 			"at86rf230_set_hw_addr_filt called for pan id\n");
-		__at86rf230_write(lp, RG_PAN_ID_0, filt->pan_id);
-		__at86rf230_write(lp, RG_PAN_ID_1, filt->pan_id >> 8);
+		__at86rf230_write(lp, RG_PAN_ID_0, pan);
+		__at86rf230_write(lp, RG_PAN_ID_1, pan >> 8);
 	}
 
 	if (changed & IEEE802515_AFILT_IEEEADDR_CHANGED) {
+		u8 i, addr[8];
+
+		memcpy(addr, &filt->ieee_addr, 8);
 		dev_vdbg(&lp->spi->dev,
 			"at86rf230_set_hw_addr_filt called for IEEE addr\n");
-		at86rf230_write_subreg(lp, SR_IEEE_ADDR_0, filt->ieee_addr[7]);
-		at86rf230_write_subreg(lp, SR_IEEE_ADDR_1, filt->ieee_addr[6]);
-		at86rf230_write_subreg(lp, SR_IEEE_ADDR_2, filt->ieee_addr[5]);
-		at86rf230_write_subreg(lp, SR_IEEE_ADDR_3, filt->ieee_addr[4]);
-		at86rf230_write_subreg(lp, SR_IEEE_ADDR_4, filt->ieee_addr[3]);
-		at86rf230_write_subreg(lp, SR_IEEE_ADDR_5, filt->ieee_addr[2]);
-		at86rf230_write_subreg(lp, SR_IEEE_ADDR_6, filt->ieee_addr[1]);
-		at86rf230_write_subreg(lp, SR_IEEE_ADDR_7, filt->ieee_addr[0]);
+		for (i = 0; i < 8; i++)
+			__at86rf230_write(lp, RG_IEEE_ADDR_0 + i, addr[i]);
 	}
 
 	if (changed & IEEE802515_AFILT_PANC_CHANGED) {
diff --git a/drivers/net/ieee802154/fakehard.c b/drivers/net/ieee802154/fakehard.c
index 06a400f10565..3c98030e0e0b 100644
--- a/drivers/net/ieee802154/fakehard.c
+++ b/drivers/net/ieee802154/fakehard.c
@@ -63,11 +63,11 @@ static struct wpan_phy *fake_get_phy(const struct net_device *dev)
  *
  * Return the ID of the PAN from the PIB.
  */
-static u16 fake_get_pan_id(const struct net_device *dev)
+static __le16 fake_get_pan_id(const struct net_device *dev)
 {
 	BUG_ON(dev->type != ARPHRD_IEEE802154);
 
-	return 0xeba1;
+	return cpu_to_le16(0xeba1);
 }
 
 /**
@@ -78,11 +78,11 @@ static u16 fake_get_pan_id(const struct net_device *dev)
  * device. If the device has not yet had a short address assigned
  * then this should return 0xFFFF to indicate a lack of association.
  */
-static u16 fake_get_short_addr(const struct net_device *dev)
+static __le16 fake_get_short_addr(const struct net_device *dev)
 {
 	BUG_ON(dev->type != ARPHRD_IEEE802154);
 
-	return 0x1;
+	return cpu_to_le16(0x1);
 }
 
 /**
@@ -149,7 +149,7 @@ static int fake_assoc_req(struct net_device *dev,
  *       802.15.4-2006 document.
  */
 static int fake_assoc_resp(struct net_device *dev,
-		struct ieee802154_addr_sa *addr, u16 short_addr, u8 status)
+		struct ieee802154_addr_sa *addr, __le16 short_addr, u8 status)
 {
 	return 0;
 }
@@ -281,8 +281,8 @@ static int ieee802154_fake_ioctl(struct net_device *dev, struct ifreq *ifr,
 	switch (cmd) {
 	case SIOCGIFADDR:
 		/* FIXME: fixed here, get from device IRL */
-		pan_id = fake_get_pan_id(dev);
-		short_addr = fake_get_short_addr(dev);
+		pan_id = le16_to_cpu(fake_get_pan_id(dev));
+		short_addr = le16_to_cpu(fake_get_short_addr(dev));
 		if (pan_id == IEEE802154_PANID_BROADCAST ||
 		    short_addr == IEEE802154_ADDR_BROADCAST)
 			return -EADDRNOTAVAIL;
diff --git a/drivers/net/ieee802154/mrf24j40.c b/drivers/net/ieee802154/mrf24j40.c
index 246befa4ba05..78a6552ed707 100644
--- a/drivers/net/ieee802154/mrf24j40.c
+++ b/drivers/net/ieee802154/mrf24j40.c
@@ -465,8 +465,8 @@ static int mrf24j40_filter(struct ieee802154_dev *dev,
 	if (changed & IEEE802515_AFILT_SADDR_CHANGED) {
 		/* Short Addr */
 		u8 addrh, addrl;
-		addrh = filt->short_addr >> 8 & 0xff;
-		addrl = filt->short_addr & 0xff;
+		addrh = le16_to_cpu(filt->short_addr) >> 8 & 0xff;
+		addrl = le16_to_cpu(filt->short_addr) & 0xff;
 
 		write_short_reg(devrec, REG_SADRH, addrh);
 		write_short_reg(devrec, REG_SADRL, addrl);
@@ -476,15 +476,16 @@ static int mrf24j40_filter(struct ieee802154_dev *dev,
 
 	if (changed & IEEE802515_AFILT_IEEEADDR_CHANGED) {
 		/* Device Address */
-		int i;
+		u8 i, addr[8];
+
+		memcpy(addr, &filt->ieee_addr, 8);
 		for (i = 0; i < 8; i++)
-			write_short_reg(devrec, REG_EADR0+i,
-					filt->ieee_addr[7-i]);
+			write_short_reg(devrec, REG_EADR0 + i, addr[i]);
 
 #ifdef DEBUG
 		printk(KERN_DEBUG "Set long addr to: ");
 		for (i = 0; i < 8; i++)
-			printk("%02hhx ", filt->ieee_addr[i]);
+			printk("%02hhx ", addr[7 - i]);
 		printk(KERN_DEBUG "\n");
 #endif
 	}
@@ -492,8 +493,8 @@ static int mrf24j40_filter(struct ieee802154_dev *dev,
 	if (changed & IEEE802515_AFILT_PANID_CHANGED) {
 		/* PAN ID */
 		u8 panidl, panidh;
-		panidh = filt->pan_id >> 8 & 0xff;
-		panidl = filt->pan_id & 0xff;
+		panidh = le16_to_cpu(filt->pan_id) >> 8 & 0xff;
+		panidl = le16_to_cpu(filt->pan_id) & 0xff;
 		write_short_reg(devrec, REG_PANIDH, panidh);
 		write_short_reg(devrec, REG_PANIDL, panidl);
 
-- 
cgit v1.2.2


From ae531b9475f62c5e1863508604cd6b3faf362d56 Mon Sep 17 00:00:00 2001
From: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Date: Fri, 14 Mar 2014 21:24:02 +0100
Subject: ieee802154: use ieee802154_addr instead of *_sa variants

Change all internal uses of ieee802154_addr_sa to ieee802154_addr,
except for those instances that communicate directly with userspace.

Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ieee802154/fakehard.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ieee802154/fakehard.c b/drivers/net/ieee802154/fakehard.c
index 3c98030e0e0b..78f18be3bbf2 100644
--- a/drivers/net/ieee802154/fakehard.c
+++ b/drivers/net/ieee802154/fakehard.c
@@ -119,7 +119,7 @@ static u8 fake_get_dsn(const struct net_device *dev)
  *       802.15.4-2006 document.
  */
 static int fake_assoc_req(struct net_device *dev,
-		struct ieee802154_addr_sa *addr, u8 channel, u8 page, u8 cap)
+		struct ieee802154_addr *addr, u8 channel, u8 page, u8 cap)
 {
 	struct wpan_phy *phy = fake_to_phy(dev);
 
@@ -149,7 +149,7 @@ static int fake_assoc_req(struct net_device *dev,
  *       802.15.4-2006 document.
  */
 static int fake_assoc_resp(struct net_device *dev,
-		struct ieee802154_addr_sa *addr, __le16 short_addr, u8 status)
+		struct ieee802154_addr *addr, __le16 short_addr, u8 status)
 {
 	return 0;
 }
@@ -167,7 +167,7 @@ static int fake_assoc_resp(struct net_device *dev,
  *       document, with the reason described in 7.3.3.2.
  */
 static int fake_disassoc_req(struct net_device *dev,
-		struct ieee802154_addr_sa *addr, u8 reason)
+		struct ieee802154_addr *addr, u8 reason)
 {
 	return ieee802154_nl_disassoc_confirm(dev, IEEE802154_SUCCESS);
 }
@@ -192,7 +192,7 @@ static int fake_disassoc_req(struct net_device *dev,
  * document, with 7.3.8 describing coordinator realignment.
  */
 static int fake_start_req(struct net_device *dev,
-			  struct ieee802154_addr_sa *addr, u8 channel, u8 page,
+			  struct ieee802154_addr *addr, u8 channel, u8 page,
 			  u8 bcn_ord, u8 sf_ord, u8 pan_coord, u8 blx,
 			  u8 coord_realign)
 {
-- 
cgit v1.2.2


From 96a0922c2349ccfbf5583708c3602945a755c874 Mon Sep 17 00:00:00 2001
From: Veaceslav Falico <vfalico@redhat.com>
Date: Thu, 13 Mar 2014 12:41:58 +0100
Subject: bonding: use the correct ether type for alb

Currently it's using the wrong ETH_P_LOOP type, which is sometimes treated
as packet length instead of ether type (because it's 0x0060).

Use the new ETH_P_LOOPBACK type.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_alb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index 9cf836b67b15..060b6117aeac 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -1005,7 +1005,7 @@ static void alb_send_lp_vid(struct slave *slave, u8 mac_addr[],
 	memset(&pkt, 0, size);
 	ether_addr_copy(pkt.mac_dst, mac_addr);
 	ether_addr_copy(pkt.mac_src, mac_addr);
-	pkt.type = cpu_to_be16(ETH_P_LOOP);
+	pkt.type = cpu_to_be16(ETH_P_LOOPBACK);
 
 	skb = dev_alloc_skb(size);
 	if (!skb)
-- 
cgit v1.2.2


From 57a7744e09867ebcfa0ccf1d6d529caa7728d552 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Thu, 13 Mar 2014 21:26:42 -0700
Subject: net: Replace u64_stats_fetch_begin_bh to u64_stats_fetch_begin_irq

Replace the bh safe variant with the hard irq safe variant.

We need a hard irq safe variant to deal with netpoll transmitting
packets from hard irq context, and we need it in most if not all of
the places using the bh safe variant.

Except on 32bit uni-processor the code is exactly the same so don't
bother with a bh variant, just have a hard irq safe variant that
everyone can use.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/dummy.c                               |  4 ++--
 drivers/net/ethernet/broadcom/b44.c               |  8 ++++----
 drivers/net/ethernet/emulex/benet/be_ethtool.c    | 12 ++++++------
 drivers/net/ethernet/emulex/benet/be_main.c       | 16 ++++++++--------
 drivers/net/ethernet/intel/i40e/i40e_ethtool.c    |  8 ++++----
 drivers/net/ethernet/intel/i40e/i40e_main.c       | 16 ++++++++--------
 drivers/net/ethernet/intel/igb/igb_ethtool.c      | 12 ++++++------
 drivers/net/ethernet/intel/igb/igb_main.c         |  8 ++++----
 drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c  |  8 ++++----
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c     |  8 ++++----
 drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c |  8 ++++----
 drivers/net/ethernet/marvell/mvneta.c             |  4 ++--
 drivers/net/ethernet/marvell/sky2.c               |  8 ++++----
 drivers/net/ethernet/neterion/vxge/vxge-main.c    |  8 ++++----
 drivers/net/ethernet/nvidia/forcedeth.c           |  8 ++++----
 drivers/net/ethernet/realtek/8139too.c            |  8 ++++----
 drivers/net/ethernet/realtek/r8169.c              |  8 ++++----
 drivers/net/ethernet/tile/tilepro.c               |  4 ++--
 drivers/net/ethernet/via/via-rhine.c              |  8 ++++----
 drivers/net/ifb.c                                 |  8 ++++----
 drivers/net/loopback.c                            |  4 ++--
 drivers/net/macvlan.c                             |  4 ++--
 drivers/net/nlmon.c                               |  4 ++--
 drivers/net/team/team.c                           |  4 ++--
 drivers/net/team/team_mode_loadbalance.c          |  4 ++--
 drivers/net/veth.c                                |  4 ++--
 drivers/net/virtio_net.c                          |  8 ++++----
 drivers/net/xen-netfront.c                        |  4 ++--
 28 files changed, 104 insertions(+), 104 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/dummy.c b/drivers/net/dummy.c
index 1656317c96f8..0932ffbf381b 100644
--- a/drivers/net/dummy.c
+++ b/drivers/net/dummy.c
@@ -63,10 +63,10 @@ static struct rtnl_link_stats64 *dummy_get_stats64(struct net_device *dev,
 
 		dstats = per_cpu_ptr(dev->dstats, i);
 		do {
-			start = u64_stats_fetch_begin_bh(&dstats->syncp);
+			start = u64_stats_fetch_begin_irq(&dstats->syncp);
 			tbytes = dstats->tx_bytes;
 			tpackets = dstats->tx_packets;
-		} while (u64_stats_fetch_retry_bh(&dstats->syncp, start));
+		} while (u64_stats_fetch_retry_irq(&dstats->syncp, start));
 		stats->tx_bytes += tbytes;
 		stats->tx_packets += tpackets;
 	}
diff --git a/drivers/net/ethernet/broadcom/b44.c b/drivers/net/ethernet/broadcom/b44.c
index 8a7bf7dad898..05ba62589017 100644
--- a/drivers/net/ethernet/broadcom/b44.c
+++ b/drivers/net/ethernet/broadcom/b44.c
@@ -1685,7 +1685,7 @@ static struct rtnl_link_stats64 *b44_get_stats64(struct net_device *dev,
 	unsigned int start;
 
 	do {
-		start = u64_stats_fetch_begin_bh(&hwstat->syncp);
+		start = u64_stats_fetch_begin_irq(&hwstat->syncp);
 
 		/* Convert HW stats into rtnl_link_stats64 stats. */
 		nstat->rx_packets = hwstat->rx_pkts;
@@ -1719,7 +1719,7 @@ static struct rtnl_link_stats64 *b44_get_stats64(struct net_device *dev,
 		/* Carrier lost counter seems to be broken for some devices */
 		nstat->tx_carrier_errors = hwstat->tx_carrier_lost;
 #endif
-	} while (u64_stats_fetch_retry_bh(&hwstat->syncp, start));
+	} while (u64_stats_fetch_retry_irq(&hwstat->syncp, start));
 
 	return nstat;
 }
@@ -2073,12 +2073,12 @@ static void b44_get_ethtool_stats(struct net_device *dev,
 	do {
 		data_src = &hwstat->tx_good_octets;
 		data_dst = data;
-		start = u64_stats_fetch_begin_bh(&hwstat->syncp);
+		start = u64_stats_fetch_begin_irq(&hwstat->syncp);
 
 		for (i = 0; i < ARRAY_SIZE(b44_gstrings); i++)
 			*data_dst++ = *data_src++;
 
-	} while (u64_stats_fetch_retry_bh(&hwstat->syncp, start));
+	} while (u64_stats_fetch_retry_irq(&hwstat->syncp, start));
 }
 
 static void b44_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
diff --git a/drivers/net/ethernet/emulex/benet/be_ethtool.c b/drivers/net/ethernet/emulex/benet/be_ethtool.c
index 66759b6ce373..15ba96cba65d 100644
--- a/drivers/net/ethernet/emulex/benet/be_ethtool.c
+++ b/drivers/net/ethernet/emulex/benet/be_ethtool.c
@@ -357,10 +357,10 @@ be_get_ethtool_stats(struct net_device *netdev,
 		struct be_rx_stats *stats = rx_stats(rxo);
 
 		do {
-			start = u64_stats_fetch_begin_bh(&stats->sync);
+			start = u64_stats_fetch_begin_irq(&stats->sync);
 			data[base] = stats->rx_bytes;
 			data[base + 1] = stats->rx_pkts;
-		} while (u64_stats_fetch_retry_bh(&stats->sync, start));
+		} while (u64_stats_fetch_retry_irq(&stats->sync, start));
 
 		for (i = 2; i < ETHTOOL_RXSTATS_NUM; i++) {
 			p = (u8 *)stats + et_rx_stats[i].offset;
@@ -373,19 +373,19 @@ be_get_ethtool_stats(struct net_device *netdev,
 		struct be_tx_stats *stats = tx_stats(txo);
 
 		do {
-			start = u64_stats_fetch_begin_bh(&stats->sync_compl);
+			start = u64_stats_fetch_begin_irq(&stats->sync_compl);
 			data[base] = stats->tx_compl;
-		} while (u64_stats_fetch_retry_bh(&stats->sync_compl, start));
+		} while (u64_stats_fetch_retry_irq(&stats->sync_compl, start));
 
 		do {
-			start = u64_stats_fetch_begin_bh(&stats->sync);
+			start = u64_stats_fetch_begin_irq(&stats->sync);
 			for (i = 1; i < ETHTOOL_TXSTATS_NUM; i++) {
 				p = (u8 *)stats + et_tx_stats[i].offset;
 				data[base + i] =
 					(et_tx_stats[i].size == sizeof(u64)) ?
 						*(u64 *)p : *(u32 *)p;
 			}
-		} while (u64_stats_fetch_retry_bh(&stats->sync, start));
+		} while (u64_stats_fetch_retry_irq(&stats->sync, start));
 		base += ETHTOOL_TXSTATS_NUM;
 	}
 }
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 239273b7b881..a61f967f9ca1 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -591,10 +591,10 @@ static struct rtnl_link_stats64 *be_get_stats64(struct net_device *netdev,
 	for_all_rx_queues(adapter, rxo, i) {
 		const struct be_rx_stats *rx_stats = rx_stats(rxo);
 		do {
-			start = u64_stats_fetch_begin_bh(&rx_stats->sync);
+			start = u64_stats_fetch_begin_irq(&rx_stats->sync);
 			pkts = rx_stats(rxo)->rx_pkts;
 			bytes = rx_stats(rxo)->rx_bytes;
-		} while (u64_stats_fetch_retry_bh(&rx_stats->sync, start));
+		} while (u64_stats_fetch_retry_irq(&rx_stats->sync, start));
 		stats->rx_packets += pkts;
 		stats->rx_bytes += bytes;
 		stats->multicast += rx_stats(rxo)->rx_mcast_pkts;
@@ -605,10 +605,10 @@ static struct rtnl_link_stats64 *be_get_stats64(struct net_device *netdev,
 	for_all_tx_queues(adapter, txo, i) {
 		const struct be_tx_stats *tx_stats = tx_stats(txo);
 		do {
-			start = u64_stats_fetch_begin_bh(&tx_stats->sync);
+			start = u64_stats_fetch_begin_irq(&tx_stats->sync);
 			pkts = tx_stats(txo)->tx_pkts;
 			bytes = tx_stats(txo)->tx_bytes;
-		} while (u64_stats_fetch_retry_bh(&tx_stats->sync, start));
+		} while (u64_stats_fetch_retry_irq(&tx_stats->sync, start));
 		stats->tx_packets += pkts;
 		stats->tx_bytes += bytes;
 	}
@@ -1408,15 +1408,15 @@ static void be_eqd_update(struct be_adapter *adapter)
 
 		rxo = &adapter->rx_obj[eqo->idx];
 		do {
-			start = u64_stats_fetch_begin_bh(&rxo->stats.sync);
+			start = u64_stats_fetch_begin_irq(&rxo->stats.sync);
 			rx_pkts = rxo->stats.rx_pkts;
-		} while (u64_stats_fetch_retry_bh(&rxo->stats.sync, start));
+		} while (u64_stats_fetch_retry_irq(&rxo->stats.sync, start));
 
 		txo = &adapter->tx_obj[eqo->idx];
 		do {
-			start = u64_stats_fetch_begin_bh(&txo->stats.sync);
+			start = u64_stats_fetch_begin_irq(&txo->stats.sync);
 			tx_pkts = txo->stats.tx_reqs;
-		} while (u64_stats_fetch_retry_bh(&txo->stats.sync, start));
+		} while (u64_stats_fetch_retry_irq(&txo->stats.sync, start));
 
 
 		/* Skip, if wrapped around or first calculation */
diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index 8ee224fdc1d1..6049e63a826d 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -653,18 +653,18 @@ static void i40e_get_ethtool_stats(struct net_device *netdev,
 
 		/* process Tx ring statistics */
 		do {
-			start = u64_stats_fetch_begin_bh(&tx_ring->syncp);
+			start = u64_stats_fetch_begin_irq(&tx_ring->syncp);
 			data[i] = tx_ring->stats.packets;
 			data[i + 1] = tx_ring->stats.bytes;
-		} while (u64_stats_fetch_retry_bh(&tx_ring->syncp, start));
+		} while (u64_stats_fetch_retry_irq(&tx_ring->syncp, start));
 
 		/* Rx ring is the 2nd half of the queue pair */
 		rx_ring = &tx_ring[1];
 		do {
-			start = u64_stats_fetch_begin_bh(&rx_ring->syncp);
+			start = u64_stats_fetch_begin_irq(&rx_ring->syncp);
 			data[i + 2] = rx_ring->stats.packets;
 			data[i + 3] = rx_ring->stats.bytes;
-		} while (u64_stats_fetch_retry_bh(&rx_ring->syncp, start));
+		} while (u64_stats_fetch_retry_irq(&rx_ring->syncp, start));
 	}
 	rcu_read_unlock();
 	if (vsi == pf->vsi[pf->lan_vsi]) {
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 7379e5a9126b..c66a11e31e6f 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -376,20 +376,20 @@ static struct rtnl_link_stats64 *i40e_get_netdev_stats_struct(
 			continue;
 
 		do {
-			start = u64_stats_fetch_begin_bh(&tx_ring->syncp);
+			start = u64_stats_fetch_begin_irq(&tx_ring->syncp);
 			packets = tx_ring->stats.packets;
 			bytes   = tx_ring->stats.bytes;
-		} while (u64_stats_fetch_retry_bh(&tx_ring->syncp, start));
+		} while (u64_stats_fetch_retry_irq(&tx_ring->syncp, start));
 
 		stats->tx_packets += packets;
 		stats->tx_bytes   += bytes;
 		rx_ring = &tx_ring[1];
 
 		do {
-			start = u64_stats_fetch_begin_bh(&rx_ring->syncp);
+			start = u64_stats_fetch_begin_irq(&rx_ring->syncp);
 			packets = rx_ring->stats.packets;
 			bytes   = rx_ring->stats.bytes;
-		} while (u64_stats_fetch_retry_bh(&rx_ring->syncp, start));
+		} while (u64_stats_fetch_retry_irq(&rx_ring->syncp, start));
 
 		stats->rx_packets += packets;
 		stats->rx_bytes   += bytes;
@@ -770,10 +770,10 @@ void i40e_update_stats(struct i40e_vsi *vsi)
 		p = ACCESS_ONCE(vsi->tx_rings[q]);
 
 		do {
-			start = u64_stats_fetch_begin_bh(&p->syncp);
+			start = u64_stats_fetch_begin_irq(&p->syncp);
 			packets = p->stats.packets;
 			bytes = p->stats.bytes;
-		} while (u64_stats_fetch_retry_bh(&p->syncp, start));
+		} while (u64_stats_fetch_retry_irq(&p->syncp, start));
 		tx_b += bytes;
 		tx_p += packets;
 		tx_restart += p->tx_stats.restart_queue;
@@ -782,10 +782,10 @@ void i40e_update_stats(struct i40e_vsi *vsi)
 		/* Rx queue is part of the same block as Tx queue */
 		p = &p[1];
 		do {
-			start = u64_stats_fetch_begin_bh(&p->syncp);
+			start = u64_stats_fetch_begin_irq(&p->syncp);
 			packets = p->stats.packets;
 			bytes = p->stats.bytes;
-		} while (u64_stats_fetch_retry_bh(&p->syncp, start));
+		} while (u64_stats_fetch_retry_irq(&p->syncp, start));
 		rx_b += bytes;
 		rx_p += packets;
 		rx_buf += p->rx_stats.alloc_buff_failed;
diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c
index 170e4dbddc11..e35bc1faa452 100644
--- a/drivers/net/ethernet/intel/igb/igb_ethtool.c
+++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c
@@ -2273,15 +2273,15 @@ static void igb_get_ethtool_stats(struct net_device *netdev,
 
 		ring = adapter->tx_ring[j];
 		do {
-			start = u64_stats_fetch_begin_bh(&ring->tx_syncp);
+			start = u64_stats_fetch_begin_irq(&ring->tx_syncp);
 			data[i]   = ring->tx_stats.packets;
 			data[i+1] = ring->tx_stats.bytes;
 			data[i+2] = ring->tx_stats.restart_queue;
-		} while (u64_stats_fetch_retry_bh(&ring->tx_syncp, start));
+		} while (u64_stats_fetch_retry_irq(&ring->tx_syncp, start));
 		do {
-			start = u64_stats_fetch_begin_bh(&ring->tx_syncp2);
+			start = u64_stats_fetch_begin_irq(&ring->tx_syncp2);
 			restart2  = ring->tx_stats.restart_queue2;
-		} while (u64_stats_fetch_retry_bh(&ring->tx_syncp2, start));
+		} while (u64_stats_fetch_retry_irq(&ring->tx_syncp2, start));
 		data[i+2] += restart2;
 
 		i += IGB_TX_QUEUE_STATS_LEN;
@@ -2289,13 +2289,13 @@ static void igb_get_ethtool_stats(struct net_device *netdev,
 	for (j = 0; j < adapter->num_rx_queues; j++) {
 		ring = adapter->rx_ring[j];
 		do {
-			start = u64_stats_fetch_begin_bh(&ring->rx_syncp);
+			start = u64_stats_fetch_begin_irq(&ring->rx_syncp);
 			data[i]   = ring->rx_stats.packets;
 			data[i+1] = ring->rx_stats.bytes;
 			data[i+2] = ring->rx_stats.drops;
 			data[i+3] = ring->rx_stats.csum_err;
 			data[i+4] = ring->rx_stats.alloc_failed;
-		} while (u64_stats_fetch_retry_bh(&ring->rx_syncp, start));
+		} while (u64_stats_fetch_retry_irq(&ring->rx_syncp, start));
 		i += IGB_RX_QUEUE_STATS_LEN;
 	}
 	spin_unlock(&adapter->stats64_lock);
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index ea8b9c41cf9f..f81d87cfcc8d 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -5168,10 +5168,10 @@ void igb_update_stats(struct igb_adapter *adapter,
 		}
 
 		do {
-			start = u64_stats_fetch_begin_bh(&ring->rx_syncp);
+			start = u64_stats_fetch_begin_irq(&ring->rx_syncp);
 			_bytes = ring->rx_stats.bytes;
 			_packets = ring->rx_stats.packets;
-		} while (u64_stats_fetch_retry_bh(&ring->rx_syncp, start));
+		} while (u64_stats_fetch_retry_irq(&ring->rx_syncp, start));
 		bytes += _bytes;
 		packets += _packets;
 	}
@@ -5184,10 +5184,10 @@ void igb_update_stats(struct igb_adapter *adapter,
 	for (i = 0; i < adapter->num_tx_queues; i++) {
 		struct igb_ring *ring = adapter->tx_ring[i];
 		do {
-			start = u64_stats_fetch_begin_bh(&ring->tx_syncp);
+			start = u64_stats_fetch_begin_irq(&ring->tx_syncp);
 			_bytes = ring->tx_stats.bytes;
 			_packets = ring->tx_stats.packets;
-		} while (u64_stats_fetch_retry_bh(&ring->tx_syncp, start));
+		} while (u64_stats_fetch_retry_irq(&ring->tx_syncp, start));
 		bytes += _bytes;
 		packets += _packets;
 	}
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
index 24dd6f0233f3..6c55c14d082a 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
@@ -1128,10 +1128,10 @@ static void ixgbe_get_ethtool_stats(struct net_device *netdev,
 		}
 
 		do {
-			start = u64_stats_fetch_begin_bh(&ring->syncp);
+			start = u64_stats_fetch_begin_irq(&ring->syncp);
 			data[i]   = ring->stats.packets;
 			data[i+1] = ring->stats.bytes;
-		} while (u64_stats_fetch_retry_bh(&ring->syncp, start));
+		} while (u64_stats_fetch_retry_irq(&ring->syncp, start));
 		i += 2;
 #ifdef BP_EXTENDED_STATS
 		data[i] = ring->stats.yields;
@@ -1156,10 +1156,10 @@ static void ixgbe_get_ethtool_stats(struct net_device *netdev,
 		}
 
 		do {
-			start = u64_stats_fetch_begin_bh(&ring->syncp);
+			start = u64_stats_fetch_begin_irq(&ring->syncp);
 			data[i]   = ring->stats.packets;
 			data[i+1] = ring->stats.bytes;
-		} while (u64_stats_fetch_retry_bh(&ring->syncp, start));
+		} while (u64_stats_fetch_retry_irq(&ring->syncp, start));
 		i += 2;
 #ifdef BP_EXTENDED_STATS
 		data[i] = ring->stats.yields;
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 851c41377b47..5d314fe873bb 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -7293,10 +7293,10 @@ static struct rtnl_link_stats64 *ixgbe_get_stats64(struct net_device *netdev,
 
 		if (ring) {
 			do {
-				start = u64_stats_fetch_begin_bh(&ring->syncp);
+				start = u64_stats_fetch_begin_irq(&ring->syncp);
 				packets = ring->stats.packets;
 				bytes   = ring->stats.bytes;
-			} while (u64_stats_fetch_retry_bh(&ring->syncp, start));
+			} while (u64_stats_fetch_retry_irq(&ring->syncp, start));
 			stats->rx_packets += packets;
 			stats->rx_bytes   += bytes;
 		}
@@ -7309,10 +7309,10 @@ static struct rtnl_link_stats64 *ixgbe_get_stats64(struct net_device *netdev,
 
 		if (ring) {
 			do {
-				start = u64_stats_fetch_begin_bh(&ring->syncp);
+				start = u64_stats_fetch_begin_irq(&ring->syncp);
 				packets = ring->stats.packets;
 				bytes   = ring->stats.bytes;
-			} while (u64_stats_fetch_retry_bh(&ring->syncp, start));
+			} while (u64_stats_fetch_retry_irq(&ring->syncp, start));
 			stats->tx_packets += packets;
 			stats->tx_bytes   += bytes;
 		}
diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
index 475341d0ce7e..8581079791fe 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
@@ -3337,10 +3337,10 @@ static struct rtnl_link_stats64 *ixgbevf_get_stats(struct net_device *netdev,
 	for (i = 0; i < adapter->num_rx_queues; i++) {
 		ring = adapter->rx_ring[i];
 		do {
-			start = u64_stats_fetch_begin_bh(&ring->syncp);
+			start = u64_stats_fetch_begin_irq(&ring->syncp);
 			bytes = ring->stats.bytes;
 			packets = ring->stats.packets;
-		} while (u64_stats_fetch_retry_bh(&ring->syncp, start));
+		} while (u64_stats_fetch_retry_irq(&ring->syncp, start));
 		stats->rx_bytes += bytes;
 		stats->rx_packets += packets;
 	}
@@ -3348,10 +3348,10 @@ static struct rtnl_link_stats64 *ixgbevf_get_stats(struct net_device *netdev,
 	for (i = 0; i < adapter->num_tx_queues; i++) {
 		ring = adapter->tx_ring[i];
 		do {
-			start = u64_stats_fetch_begin_bh(&ring->syncp);
+			start = u64_stats_fetch_begin_irq(&ring->syncp);
 			bytes = ring->stats.bytes;
 			packets = ring->stats.packets;
-		} while (u64_stats_fetch_retry_bh(&ring->syncp, start));
+		} while (u64_stats_fetch_retry_irq(&ring->syncp, start));
 		stats->tx_bytes += bytes;
 		stats->tx_packets += packets;
 	}
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 12c6a66e54d1..f3afcbdbb725 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -508,12 +508,12 @@ struct rtnl_link_stats64 *mvneta_get_stats64(struct net_device *dev,
 
 		cpu_stats = per_cpu_ptr(pp->stats, cpu);
 		do {
-			start = u64_stats_fetch_begin_bh(&cpu_stats->syncp);
+			start = u64_stats_fetch_begin_irq(&cpu_stats->syncp);
 			rx_packets = cpu_stats->rx_packets;
 			rx_bytes   = cpu_stats->rx_bytes;
 			tx_packets = cpu_stats->tx_packets;
 			tx_bytes   = cpu_stats->tx_bytes;
-		} while (u64_stats_fetch_retry_bh(&cpu_stats->syncp, start));
+		} while (u64_stats_fetch_retry_irq(&cpu_stats->syncp, start));
 
 		stats->rx_packets += rx_packets;
 		stats->rx_bytes   += rx_bytes;
diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c
index 2434611d1b4e..5a5b23741179 100644
--- a/drivers/net/ethernet/marvell/sky2.c
+++ b/drivers/net/ethernet/marvell/sky2.c
@@ -3908,19 +3908,19 @@ static struct rtnl_link_stats64 *sky2_get_stats(struct net_device *dev,
 	u64 _bytes, _packets;
 
 	do {
-		start = u64_stats_fetch_begin_bh(&sky2->rx_stats.syncp);
+		start = u64_stats_fetch_begin_irq(&sky2->rx_stats.syncp);
 		_bytes = sky2->rx_stats.bytes;
 		_packets = sky2->rx_stats.packets;
-	} while (u64_stats_fetch_retry_bh(&sky2->rx_stats.syncp, start));
+	} while (u64_stats_fetch_retry_irq(&sky2->rx_stats.syncp, start));
 
 	stats->rx_packets = _packets;
 	stats->rx_bytes = _bytes;
 
 	do {
-		start = u64_stats_fetch_begin_bh(&sky2->tx_stats.syncp);
+		start = u64_stats_fetch_begin_irq(&sky2->tx_stats.syncp);
 		_bytes = sky2->tx_stats.bytes;
 		_packets = sky2->tx_stats.packets;
-	} while (u64_stats_fetch_retry_bh(&sky2->tx_stats.syncp, start));
+	} while (u64_stats_fetch_retry_irq(&sky2->tx_stats.syncp, start));
 
 	stats->tx_packets = _packets;
 	stats->tx_bytes = _bytes;
diff --git a/drivers/net/ethernet/neterion/vxge/vxge-main.c b/drivers/net/ethernet/neterion/vxge/vxge-main.c
index c83cedd26dec..c5bb1ace4a74 100644
--- a/drivers/net/ethernet/neterion/vxge/vxge-main.c
+++ b/drivers/net/ethernet/neterion/vxge/vxge-main.c
@@ -3134,12 +3134,12 @@ vxge_get_stats64(struct net_device *dev, struct rtnl_link_stats64 *net_stats)
 		u64 packets, bytes, multicast;
 
 		do {
-			start = u64_stats_fetch_begin_bh(&rxstats->syncp);
+			start = u64_stats_fetch_begin_irq(&rxstats->syncp);
 
 			packets   = rxstats->rx_frms;
 			multicast = rxstats->rx_mcast;
 			bytes     = rxstats->rx_bytes;
-		} while (u64_stats_fetch_retry_bh(&rxstats->syncp, start));
+		} while (u64_stats_fetch_retry_irq(&rxstats->syncp, start));
 
 		net_stats->rx_packets += packets;
 		net_stats->rx_bytes += bytes;
@@ -3149,11 +3149,11 @@ vxge_get_stats64(struct net_device *dev, struct rtnl_link_stats64 *net_stats)
 		net_stats->rx_dropped += rxstats->rx_dropped;
 
 		do {
-			start = u64_stats_fetch_begin_bh(&txstats->syncp);
+			start = u64_stats_fetch_begin_irq(&txstats->syncp);
 
 			packets = txstats->tx_frms;
 			bytes   = txstats->tx_bytes;
-		} while (u64_stats_fetch_retry_bh(&txstats->syncp, start));
+		} while (u64_stats_fetch_retry_irq(&txstats->syncp, start));
 
 		net_stats->tx_packets += packets;
 		net_stats->tx_bytes += bytes;
diff --git a/drivers/net/ethernet/nvidia/forcedeth.c b/drivers/net/ethernet/nvidia/forcedeth.c
index bad3c057ee8a..811be0bccd14 100644
--- a/drivers/net/ethernet/nvidia/forcedeth.c
+++ b/drivers/net/ethernet/nvidia/forcedeth.c
@@ -1753,19 +1753,19 @@ nv_get_stats64(struct net_device *dev, struct rtnl_link_stats64 *storage)
 
 	/* software stats */
 	do {
-		syncp_start = u64_stats_fetch_begin_bh(&np->swstats_rx_syncp);
+		syncp_start = u64_stats_fetch_begin_irq(&np->swstats_rx_syncp);
 		storage->rx_packets       = np->stat_rx_packets;
 		storage->rx_bytes         = np->stat_rx_bytes;
 		storage->rx_dropped       = np->stat_rx_dropped;
 		storage->rx_missed_errors = np->stat_rx_missed_errors;
-	} while (u64_stats_fetch_retry_bh(&np->swstats_rx_syncp, syncp_start));
+	} while (u64_stats_fetch_retry_irq(&np->swstats_rx_syncp, syncp_start));
 
 	do {
-		syncp_start = u64_stats_fetch_begin_bh(&np->swstats_tx_syncp);
+		syncp_start = u64_stats_fetch_begin_irq(&np->swstats_tx_syncp);
 		storage->tx_packets = np->stat_tx_packets;
 		storage->tx_bytes   = np->stat_tx_bytes;
 		storage->tx_dropped = np->stat_tx_dropped;
-	} while (u64_stats_fetch_retry_bh(&np->swstats_tx_syncp, syncp_start));
+	} while (u64_stats_fetch_retry_irq(&np->swstats_tx_syncp, syncp_start));
 
 	/* If the nic supports hw counters then retrieve latest values */
 	if (np->driver_data & DEV_HAS_STATISTICS_V123) {
diff --git a/drivers/net/ethernet/realtek/8139too.c b/drivers/net/ethernet/realtek/8139too.c
index 8cb2f357026e..2e5df148af4c 100644
--- a/drivers/net/ethernet/realtek/8139too.c
+++ b/drivers/net/ethernet/realtek/8139too.c
@@ -2522,16 +2522,16 @@ rtl8139_get_stats64(struct net_device *dev, struct rtnl_link_stats64 *stats)
 	netdev_stats_to_stats64(stats, &dev->stats);
 
 	do {
-		start = u64_stats_fetch_begin_bh(&tp->rx_stats.syncp);
+		start = u64_stats_fetch_begin_irq(&tp->rx_stats.syncp);
 		stats->rx_packets = tp->rx_stats.packets;
 		stats->rx_bytes = tp->rx_stats.bytes;
-	} while (u64_stats_fetch_retry_bh(&tp->rx_stats.syncp, start));
+	} while (u64_stats_fetch_retry_irq(&tp->rx_stats.syncp, start));
 
 	do {
-		start = u64_stats_fetch_begin_bh(&tp->tx_stats.syncp);
+		start = u64_stats_fetch_begin_irq(&tp->tx_stats.syncp);
 		stats->tx_packets = tp->tx_stats.packets;
 		stats->tx_bytes = tp->tx_stats.bytes;
-	} while (u64_stats_fetch_retry_bh(&tp->tx_stats.syncp, start));
+	} while (u64_stats_fetch_retry_irq(&tp->tx_stats.syncp, start));
 
 	return stats;
 }
diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index 90c14d16f261..aa1c079f231d 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -6590,17 +6590,17 @@ rtl8169_get_stats64(struct net_device *dev, struct rtnl_link_stats64 *stats)
 		rtl8169_rx_missed(dev, ioaddr);
 
 	do {
-		start = u64_stats_fetch_begin_bh(&tp->rx_stats.syncp);
+		start = u64_stats_fetch_begin_irq(&tp->rx_stats.syncp);
 		stats->rx_packets = tp->rx_stats.packets;
 		stats->rx_bytes	= tp->rx_stats.bytes;
-	} while (u64_stats_fetch_retry_bh(&tp->rx_stats.syncp, start));
+	} while (u64_stats_fetch_retry_irq(&tp->rx_stats.syncp, start));
 
 
 	do {
-		start = u64_stats_fetch_begin_bh(&tp->tx_stats.syncp);
+		start = u64_stats_fetch_begin_irq(&tp->tx_stats.syncp);
 		stats->tx_packets = tp->tx_stats.packets;
 		stats->tx_bytes	= tp->tx_stats.bytes;
-	} while (u64_stats_fetch_retry_bh(&tp->tx_stats.syncp, start));
+	} while (u64_stats_fetch_retry_irq(&tp->tx_stats.syncp, start));
 
 	stats->rx_dropped	= dev->stats.rx_dropped;
 	stats->tx_dropped	= dev->stats.tx_dropped;
diff --git a/drivers/net/ethernet/tile/tilepro.c b/drivers/net/ethernet/tile/tilepro.c
index edb2e12a0fe2..7e33973487ee 100644
--- a/drivers/net/ethernet/tile/tilepro.c
+++ b/drivers/net/ethernet/tile/tilepro.c
@@ -2068,14 +2068,14 @@ static struct rtnl_link_stats64 *tile_net_get_stats64(struct net_device *dev,
 		cpu_stats = &priv->cpu[i]->stats;
 
 		do {
-			start = u64_stats_fetch_begin_bh(&cpu_stats->syncp);
+			start = u64_stats_fetch_begin_irq(&cpu_stats->syncp);
 			trx_packets = cpu_stats->rx_packets;
 			ttx_packets = cpu_stats->tx_packets;
 			trx_bytes   = cpu_stats->rx_bytes;
 			ttx_bytes   = cpu_stats->tx_bytes;
 			trx_errors  = cpu_stats->rx_errors;
 			trx_dropped = cpu_stats->rx_dropped;
-		} while (u64_stats_fetch_retry_bh(&cpu_stats->syncp, start));
+		} while (u64_stats_fetch_retry_irq(&cpu_stats->syncp, start));
 
 		rx_packets += trx_packets;
 		tx_packets += ttx_packets;
diff --git a/drivers/net/ethernet/via/via-rhine.c b/drivers/net/ethernet/via/via-rhine.c
index ef312bc6b865..5bc1a2d02dc1 100644
--- a/drivers/net/ethernet/via/via-rhine.c
+++ b/drivers/net/ethernet/via/via-rhine.c
@@ -2070,16 +2070,16 @@ rhine_get_stats64(struct net_device *dev, struct rtnl_link_stats64 *stats)
 	netdev_stats_to_stats64(stats, &dev->stats);
 
 	do {
-		start = u64_stats_fetch_begin_bh(&rp->rx_stats.syncp);
+		start = u64_stats_fetch_begin_irq(&rp->rx_stats.syncp);
 		stats->rx_packets = rp->rx_stats.packets;
 		stats->rx_bytes = rp->rx_stats.bytes;
-	} while (u64_stats_fetch_retry_bh(&rp->rx_stats.syncp, start));
+	} while (u64_stats_fetch_retry_irq(&rp->rx_stats.syncp, start));
 
 	do {
-		start = u64_stats_fetch_begin_bh(&rp->tx_stats.syncp);
+		start = u64_stats_fetch_begin_irq(&rp->tx_stats.syncp);
 		stats->tx_packets = rp->tx_stats.packets;
 		stats->tx_bytes = rp->tx_stats.bytes;
-	} while (u64_stats_fetch_retry_bh(&rp->tx_stats.syncp, start));
+	} while (u64_stats_fetch_retry_irq(&rp->tx_stats.syncp, start));
 
 	return stats;
 }
diff --git a/drivers/net/ifb.c b/drivers/net/ifb.c
index c14d39bf32d0..1da36764b1a4 100644
--- a/drivers/net/ifb.c
+++ b/drivers/net/ifb.c
@@ -136,18 +136,18 @@ static struct rtnl_link_stats64 *ifb_stats64(struct net_device *dev,
 	unsigned int start;
 
 	do {
-		start = u64_stats_fetch_begin_bh(&dp->rsync);
+		start = u64_stats_fetch_begin_irq(&dp->rsync);
 		stats->rx_packets = dp->rx_packets;
 		stats->rx_bytes = dp->rx_bytes;
-	} while (u64_stats_fetch_retry_bh(&dp->rsync, start));
+	} while (u64_stats_fetch_retry_irq(&dp->rsync, start));
 
 	do {
-		start = u64_stats_fetch_begin_bh(&dp->tsync);
+		start = u64_stats_fetch_begin_irq(&dp->tsync);
 
 		stats->tx_packets = dp->tx_packets;
 		stats->tx_bytes = dp->tx_bytes;
 
-	} while (u64_stats_fetch_retry_bh(&dp->tsync, start));
+	} while (u64_stats_fetch_retry_irq(&dp->tsync, start));
 
 	stats->rx_dropped = dev->stats.rx_dropped;
 	stats->tx_dropped = dev->stats.tx_dropped;
diff --git a/drivers/net/loopback.c b/drivers/net/loopback.c
index 282effee7e1c..bb96409f8c05 100644
--- a/drivers/net/loopback.c
+++ b/drivers/net/loopback.c
@@ -111,10 +111,10 @@ static struct rtnl_link_stats64 *loopback_get_stats64(struct net_device *dev,
 
 		lb_stats = per_cpu_ptr(dev->lstats, i);
 		do {
-			start = u64_stats_fetch_begin_bh(&lb_stats->syncp);
+			start = u64_stats_fetch_begin_irq(&lb_stats->syncp);
 			tbytes = lb_stats->bytes;
 			tpackets = lb_stats->packets;
-		} while (u64_stats_fetch_retry_bh(&lb_stats->syncp, start));
+		} while (u64_stats_fetch_retry_irq(&lb_stats->syncp, start));
 		bytes   += tbytes;
 		packets += tpackets;
 	}
diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
index c683ac2c8c94..753a8c23d15d 100644
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -582,13 +582,13 @@ static struct rtnl_link_stats64 *macvlan_dev_get_stats64(struct net_device *dev,
 		for_each_possible_cpu(i) {
 			p = per_cpu_ptr(vlan->pcpu_stats, i);
 			do {
-				start = u64_stats_fetch_begin_bh(&p->syncp);
+				start = u64_stats_fetch_begin_irq(&p->syncp);
 				rx_packets	= p->rx_packets;
 				rx_bytes	= p->rx_bytes;
 				rx_multicast	= p->rx_multicast;
 				tx_packets	= p->tx_packets;
 				tx_bytes	= p->tx_bytes;
-			} while (u64_stats_fetch_retry_bh(&p->syncp, start));
+			} while (u64_stats_fetch_retry_irq(&p->syncp, start));
 
 			stats->rx_packets	+= rx_packets;
 			stats->rx_bytes		+= rx_bytes;
diff --git a/drivers/net/nlmon.c b/drivers/net/nlmon.c
index 14ce7de6a933..6929b03ec638 100644
--- a/drivers/net/nlmon.c
+++ b/drivers/net/nlmon.c
@@ -90,10 +90,10 @@ nlmon_get_stats64(struct net_device *dev, struct rtnl_link_stats64 *stats)
 		nl_stats = per_cpu_ptr(dev->lstats, i);
 
 		do {
-			start = u64_stats_fetch_begin_bh(&nl_stats->syncp);
+			start = u64_stats_fetch_begin_irq(&nl_stats->syncp);
 			tbytes = nl_stats->bytes;
 			tpackets = nl_stats->packets;
-		} while (u64_stats_fetch_retry_bh(&nl_stats->syncp, start));
+		} while (u64_stats_fetch_retry_irq(&nl_stats->syncp, start));
 
 		packets += tpackets;
 		bytes += tbytes;
diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c
index aea92f02401b..2b1a1d61072c 100644
--- a/drivers/net/team/team.c
+++ b/drivers/net/team/team.c
@@ -1761,13 +1761,13 @@ team_get_stats64(struct net_device *dev, struct rtnl_link_stats64 *stats)
 	for_each_possible_cpu(i) {
 		p = per_cpu_ptr(team->pcpu_stats, i);
 		do {
-			start = u64_stats_fetch_begin_bh(&p->syncp);
+			start = u64_stats_fetch_begin_irq(&p->syncp);
 			rx_packets	= p->rx_packets;
 			rx_bytes	= p->rx_bytes;
 			rx_multicast	= p->rx_multicast;
 			tx_packets	= p->tx_packets;
 			tx_bytes	= p->tx_bytes;
-		} while (u64_stats_fetch_retry_bh(&p->syncp, start));
+		} while (u64_stats_fetch_retry_irq(&p->syncp, start));
 
 		stats->rx_packets	+= rx_packets;
 		stats->rx_bytes		+= rx_bytes;
diff --git a/drivers/net/team/team_mode_loadbalance.c b/drivers/net/team/team_mode_loadbalance.c
index d671fc3ac5ac..dbde3412ee5e 100644
--- a/drivers/net/team/team_mode_loadbalance.c
+++ b/drivers/net/team/team_mode_loadbalance.c
@@ -432,9 +432,9 @@ static void __lb_one_cpu_stats_add(struct lb_stats *acc_stats,
 	struct lb_stats tmp;
 
 	do {
-		start = u64_stats_fetch_begin_bh(syncp);
+		start = u64_stats_fetch_begin_irq(syncp);
 		tmp.tx_bytes = cpu_stats->tx_bytes;
-	} while (u64_stats_fetch_retry_bh(syncp, start));
+	} while (u64_stats_fetch_retry_irq(syncp, start));
 	acc_stats->tx_bytes += tmp.tx_bytes;
 }
 
diff --git a/drivers/net/veth.c b/drivers/net/veth.c
index 3aca92e80e1e..e1c77d4b80e4 100644
--- a/drivers/net/veth.c
+++ b/drivers/net/veth.c
@@ -156,10 +156,10 @@ static u64 veth_stats_one(struct pcpu_vstats *result, struct net_device *dev)
 		unsigned int start;
 
 		do {
-			start = u64_stats_fetch_begin_bh(&stats->syncp);
+			start = u64_stats_fetch_begin_irq(&stats->syncp);
 			packets = stats->packets;
 			bytes = stats->bytes;
-		} while (u64_stats_fetch_retry_bh(&stats->syncp, start));
+		} while (u64_stats_fetch_retry_irq(&stats->syncp, start));
 		result->packets += packets;
 		result->bytes += bytes;
 	}
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 5632a99cbbd2..80d84c446962 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -1000,16 +1000,16 @@ static struct rtnl_link_stats64 *virtnet_stats(struct net_device *dev,
 		u64 tpackets, tbytes, rpackets, rbytes;
 
 		do {
-			start = u64_stats_fetch_begin_bh(&stats->tx_syncp);
+			start = u64_stats_fetch_begin_irq(&stats->tx_syncp);
 			tpackets = stats->tx_packets;
 			tbytes   = stats->tx_bytes;
-		} while (u64_stats_fetch_retry_bh(&stats->tx_syncp, start));
+		} while (u64_stats_fetch_retry_irq(&stats->tx_syncp, start));
 
 		do {
-			start = u64_stats_fetch_begin_bh(&stats->rx_syncp);
+			start = u64_stats_fetch_begin_irq(&stats->rx_syncp);
 			rpackets = stats->rx_packets;
 			rbytes   = stats->rx_bytes;
-		} while (u64_stats_fetch_retry_bh(&stats->rx_syncp, start));
+		} while (u64_stats_fetch_retry_irq(&stats->rx_syncp, start));
 
 		tot->rx_packets += rpackets;
 		tot->tx_packets += tpackets;
diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
index a38f03ded5a4..49f3b3dbbed8 100644
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -1060,13 +1060,13 @@ static struct rtnl_link_stats64 *xennet_get_stats64(struct net_device *dev,
 		unsigned int start;
 
 		do {
-			start = u64_stats_fetch_begin_bh(&stats->syncp);
+			start = u64_stats_fetch_begin_irq(&stats->syncp);
 
 			rx_packets = stats->rx_packets;
 			tx_packets = stats->tx_packets;
 			rx_bytes = stats->rx_bytes;
 			tx_bytes = stats->tx_bytes;
-		} while (u64_stats_fetch_retry_bh(&stats->syncp, start));
+		} while (u64_stats_fetch_retry_irq(&stats->syncp, start));
 
 		tot->rx_packets += rx_packets;
 		tot->tx_packets += tx_packets;
-- 
cgit v1.2.2


From 7a2cea2aaae2d5eb5c00c49c52180c7c2c66130a Mon Sep 17 00:00:00 2001
From: Steve Wise <swise@opengridcomputing.com>
Date: Fri, 14 Mar 2014 21:52:07 +0530
Subject: cxgb4/iw_cxgb4: Treat CPL_ERR_KEEPALV_NEG_ADVICE as negative advice

Based on original work by Anand Priyadarshee <anandp@chelsio.com>.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/chelsio/cxgb4/t4_msg.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_msg.h b/drivers/net/ethernet/chelsio/cxgb4/t4_msg.h
index cd6874b571ee..f2738c710789 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_msg.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_msg.h
@@ -116,6 +116,7 @@ enum CPL_error {
 	CPL_ERR_KEEPALIVE_TIMEDOUT = 34,
 	CPL_ERR_RTX_NEG_ADVICE     = 35,
 	CPL_ERR_PERSIST_NEG_ADVICE = 36,
+	CPL_ERR_KEEPALV_NEG_ADVICE = 37,
 	CPL_ERR_ABORT_FAILED       = 42,
 	CPL_ERR_IWARP_FLM          = 50,
 };
-- 
cgit v1.2.2


From 05eb23893c2cf9502a9cec0c32e7f1d1ed2895c8 Mon Sep 17 00:00:00 2001
From: Steve Wise <swise@opengridcomputing.com>
Date: Fri, 14 Mar 2014 21:52:08 +0530
Subject: cxgb4/iw_cxgb4: Doorbell Drop Avoidance Bug Fixes

The current logic suffers from a slow response time to disable user DB
usage, and also fails to avoid DB FIFO drops under heavy load. This commit
fixes these deficiencies and makes the avoidance logic more optimal.
This is done by more efficiently notifying the ULDs of potential DB
problems, and implements a smoother flow control algorithm in iw_cxgb4,
which is the ULD that puts the most load on the DB fifo.

Design:

cxgb4:

Direct ULD callback from the DB FULL/DROP interrupt handler.  This allows
the ULD to stop doing user DB writes as quickly as possible.

While user DB usage is disabled, the LLD will accumulate DB write events
for its queues.  Then once DB usage is reenabled, a single DB write is
done for each queue with its accumulated write count.  This reduces the
load put on the DB fifo when reenabling.

iw_cxgb4:

Instead of marking each qp to indicate DB writes are disabled, we create
a device-global status page that each user process maps.  This allows
iw_cxgb4 to only set this single bit to disable all DB writes for all
user QPs vs traversing the idr of all the active QPs.  If the libcxgb4
doesn't support this, then we fall back to the old approach of marking
each QP.  Thus we allow the new driver to work with an older libcxgb4.

When the LLD upcalls iw_cxgb4 indicating DB FULL, we disable all DB writes
via the status page and transition the DB state to STOPPED.  As user
processes see that DB writes are disabled, they call into iw_cxgb4
to submit their DB write events.  Since the DB state is in STOPPED,
the QP trying to write gets enqueued on a new DB "flow control" list.
As subsequent DB writes are submitted for this flow controlled QP, the
amount of writes are accumulated for each QP on the flow control list.
So all the user QPs that are actively ringing the DB get put on this
list and the number of writes they request are accumulated.

When the LLD upcalls iw_cxgb4 indicating DB EMPTY, which is in a workq
context, we change the DB state to FLOW_CONTROL, and begin resuming all
the QPs that are on the flow control list.  This logic runs on until
the flow control list is empty or we exit FLOW_CONTROL mode (due to
a DB DROP upcall, for example).  QPs are removed from this list, and
their accumulated DB write counts written to the DB FIFO.  Sets of QPs,
called chunks in the code, are removed at one time. The chunk size is 64.
So 64 QPs are resumed at a time, and before the next chunk is resumed, the
logic waits (blocks) for the DB FIFO to drain.  This prevents resuming to
quickly and overflowing the FIFO.  Once the flow control list is empty,
the db state transitions back to NORMAL and user QPs are again allowed
to write directly to the user DB register.

The algorithm is designed such that if the DB write load is high enough,
then all the DB writes get submitted by the kernel using this flow
controlled approach to avoid DB drops.  As the load lightens though, we
resume to normal DB writes directly by user applications.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/chelsio/cxgb4/cxgb4.h      |  1 +
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 87 +++++++++++++++----------
 drivers/net/ethernet/chelsio/cxgb4/sge.c        |  8 ++-
 3 files changed, 58 insertions(+), 38 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
index 50abe1d61287..32db37709263 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
@@ -500,6 +500,7 @@ struct sge_txq {
 	spinlock_t db_lock;
 	int db_disabled;
 	unsigned short db_pidx;
+	unsigned short db_pidx_inc;
 	u64 udb;
 };
 
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index 0ac53dd84c61..cc04d090354c 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -3578,14 +3578,25 @@ static void drain_db_fifo(struct adapter *adap, int usecs)
 
 static void disable_txq_db(struct sge_txq *q)
 {
-	spin_lock_irq(&q->db_lock);
+	unsigned long flags;
+
+	spin_lock_irqsave(&q->db_lock, flags);
 	q->db_disabled = 1;
-	spin_unlock_irq(&q->db_lock);
+	spin_unlock_irqrestore(&q->db_lock, flags);
 }
 
-static void enable_txq_db(struct sge_txq *q)
+static void enable_txq_db(struct adapter *adap, struct sge_txq *q)
 {
 	spin_lock_irq(&q->db_lock);
+	if (q->db_pidx_inc) {
+		/* Make sure that all writes to the TX descriptors
+		 * are committed before we tell HW about them.
+		 */
+		wmb();
+		t4_write_reg(adap, MYPF_REG(SGE_PF_KDOORBELL),
+			     QID(q->cntxt_id) | PIDX(q->db_pidx_inc));
+		q->db_pidx_inc = 0;
+	}
 	q->db_disabled = 0;
 	spin_unlock_irq(&q->db_lock);
 }
@@ -3607,11 +3618,32 @@ static void enable_dbs(struct adapter *adap)
 	int i;
 
 	for_each_ethrxq(&adap->sge, i)
-		enable_txq_db(&adap->sge.ethtxq[i].q);
+		enable_txq_db(adap, &adap->sge.ethtxq[i].q);
 	for_each_ofldrxq(&adap->sge, i)
-		enable_txq_db(&adap->sge.ofldtxq[i].q);
+		enable_txq_db(adap, &adap->sge.ofldtxq[i].q);
 	for_each_port(adap, i)
-		enable_txq_db(&adap->sge.ctrlq[i].q);
+		enable_txq_db(adap, &adap->sge.ctrlq[i].q);
+}
+
+static void notify_rdma_uld(struct adapter *adap, enum cxgb4_control cmd)
+{
+	if (adap->uld_handle[CXGB4_ULD_RDMA])
+		ulds[CXGB4_ULD_RDMA].control(adap->uld_handle[CXGB4_ULD_RDMA],
+				cmd);
+}
+
+static void process_db_full(struct work_struct *work)
+{
+	struct adapter *adap;
+
+	adap = container_of(work, struct adapter, db_full_task);
+
+	drain_db_fifo(adap, dbfifo_drain_delay);
+	enable_dbs(adap);
+	notify_rdma_uld(adap, CXGB4_CONTROL_DB_EMPTY);
+	t4_set_reg_field(adap, SGE_INT_ENABLE3,
+			 DBFIFO_HP_INT | DBFIFO_LP_INT,
+			 DBFIFO_HP_INT | DBFIFO_LP_INT);
 }
 
 static void sync_txq_pidx(struct adapter *adap, struct sge_txq *q)
@@ -3619,7 +3651,7 @@ static void sync_txq_pidx(struct adapter *adap, struct sge_txq *q)
 	u16 hw_pidx, hw_cidx;
 	int ret;
 
-	spin_lock_bh(&q->db_lock);
+	spin_lock_irq(&q->db_lock);
 	ret = read_eq_indices(adap, (u16)q->cntxt_id, &hw_pidx, &hw_cidx);
 	if (ret)
 		goto out;
@@ -3636,7 +3668,8 @@ static void sync_txq_pidx(struct adapter *adap, struct sge_txq *q)
 	}
 out:
 	q->db_disabled = 0;
-	spin_unlock_bh(&q->db_lock);
+	q->db_pidx_inc = 0;
+	spin_unlock_irq(&q->db_lock);
 	if (ret)
 		CH_WARN(adap, "DB drop recovery failed.\n");
 }
@@ -3652,29 +3685,6 @@ static void recover_all_queues(struct adapter *adap)
 		sync_txq_pidx(adap, &adap->sge.ctrlq[i].q);
 }
 
-static void notify_rdma_uld(struct adapter *adap, enum cxgb4_control cmd)
-{
-	mutex_lock(&uld_mutex);
-	if (adap->uld_handle[CXGB4_ULD_RDMA])
-		ulds[CXGB4_ULD_RDMA].control(adap->uld_handle[CXGB4_ULD_RDMA],
-				cmd);
-	mutex_unlock(&uld_mutex);
-}
-
-static void process_db_full(struct work_struct *work)
-{
-	struct adapter *adap;
-
-	adap = container_of(work, struct adapter, db_full_task);
-
-	notify_rdma_uld(adap, CXGB4_CONTROL_DB_FULL);
-	drain_db_fifo(adap, dbfifo_drain_delay);
-	t4_set_reg_field(adap, SGE_INT_ENABLE3,
-			 DBFIFO_HP_INT | DBFIFO_LP_INT,
-			 DBFIFO_HP_INT | DBFIFO_LP_INT);
-	notify_rdma_uld(adap, CXGB4_CONTROL_DB_EMPTY);
-}
-
 static void process_db_drop(struct work_struct *work)
 {
 	struct adapter *adap;
@@ -3682,11 +3692,13 @@ static void process_db_drop(struct work_struct *work)
 	adap = container_of(work, struct adapter, db_drop_task);
 
 	if (is_t4(adap->params.chip)) {
-		disable_dbs(adap);
+		drain_db_fifo(adap, dbfifo_drain_delay);
 		notify_rdma_uld(adap, CXGB4_CONTROL_DB_DROP);
-		drain_db_fifo(adap, 1);
+		drain_db_fifo(adap, dbfifo_drain_delay);
 		recover_all_queues(adap);
+		drain_db_fifo(adap, dbfifo_drain_delay);
 		enable_dbs(adap);
+		notify_rdma_uld(adap, CXGB4_CONTROL_DB_EMPTY);
 	} else {
 		u32 dropped_db = t4_read_reg(adap, 0x010ac);
 		u16 qid = (dropped_db >> 15) & 0x1ffff;
@@ -3727,6 +3739,8 @@ static void process_db_drop(struct work_struct *work)
 void t4_db_full(struct adapter *adap)
 {
 	if (is_t4(adap->params.chip)) {
+		disable_dbs(adap);
+		notify_rdma_uld(adap, CXGB4_CONTROL_DB_FULL);
 		t4_set_reg_field(adap, SGE_INT_ENABLE3,
 				 DBFIFO_HP_INT | DBFIFO_LP_INT, 0);
 		queue_work(workq, &adap->db_full_task);
@@ -3735,8 +3749,11 @@ void t4_db_full(struct adapter *adap)
 
 void t4_db_dropped(struct adapter *adap)
 {
-	if (is_t4(adap->params.chip))
-		queue_work(workq, &adap->db_drop_task);
+	if (is_t4(adap->params.chip)) {
+		disable_dbs(adap);
+		notify_rdma_uld(adap, CXGB4_CONTROL_DB_FULL);
+	}
+	queue_work(workq, &adap->db_drop_task);
 }
 
 static void uld_attach(struct adapter *adap, unsigned int uld)
diff --git a/drivers/net/ethernet/chelsio/cxgb4/sge.c b/drivers/net/ethernet/chelsio/cxgb4/sge.c
index 46429f9d0592..d4db382ff8c7 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/sge.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/sge.c
@@ -860,9 +860,10 @@ static void cxgb_pio_copy(u64 __iomem *dst, u64 *src)
 static inline void ring_tx_db(struct adapter *adap, struct sge_txq *q, int n)
 {
 	unsigned int *wr, index;
+	unsigned long flags;
 
 	wmb();            /* write descriptors before telling HW */
-	spin_lock(&q->db_lock);
+	spin_lock_irqsave(&q->db_lock, flags);
 	if (!q->db_disabled) {
 		if (is_t4(adap->params.chip)) {
 			t4_write_reg(adap, MYPF_REG(SGE_PF_KDOORBELL),
@@ -878,9 +879,10 @@ static inline void ring_tx_db(struct adapter *adap, struct sge_txq *q, int n)
 				writel(n,  adap->bar2 + q->udb + 8);
 			wmb();
 		}
-	}
+	} else
+		q->db_pidx_inc += n;
 	q->db_pidx = q->pidx;
-	spin_unlock(&q->db_lock);
+	spin_unlock_irqrestore(&q->db_lock, flags);
 }
 
 /**
-- 
cgit v1.2.2


From b3529744b412e9870c9e10fef874e3bee2af1afa Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Fri, 14 Mar 2014 17:57:59 -0700
Subject: bnx2x: Don't receive packets when the napi budget == 0

Processing any incoming packets with a with a napi budget of 0
is incorrect driver behavior.

This matters as netpoll will shortly call drivers with a budget of 0
to avoid receive packet processing happening in hard irq context.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
index 117b5c7f8ac9..acd494647f25 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -872,6 +872,8 @@ static int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget)
 	if (unlikely(bp->panic))
 		return 0;
 #endif
+	if (budget <= 0)
+		return rx_pkt;
 
 	bd_cons = fp->rx_bd_cons;
 	bd_prod = fp->rx_bd_prod;
-- 
cgit v1.2.2


From 390f86dfbd3e7c4579aaa88281149e1cbac88a2d Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Fri, 14 Mar 2014 17:59:10 -0700
Subject: i40e: Don't receive packets when the napi budget == 0

Processing any incoming packets with a with a napi budget of 0
is incorrect driver behavior.

This matters as netpoll will shortly call drivers with a budget of 0
to avoid receive packet processing happening in hard irq context.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/i40e/i40e_txrx.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index daa3b295ff3d..88666adb0743 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -1302,6 +1302,9 @@ static int i40e_clean_rx_irq(struct i40e_ring *rx_ring, int budget)
 	u8 rx_ptype;
 	u64 qword;
 
+	if (budget <= 0)
+		return 0;
+
 	rx_desc = I40E_RX_DESC(rx_ring, i);
 	qword = le64_to_cpu(rx_desc->wb.qword1.status_error_len);
 	rx_status = (qword & I40E_RXD_QW1_STATUS_MASK) >>
-- 
cgit v1.2.2


From 57ba34c9b068f314b219affafc19a39f8735d5e8 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Fri, 14 Mar 2014 18:00:06 -0700
Subject: igb: Don't receive packets when the napi budget == 0

Processing any incoming packets with a with a napi budget of 0
is incorrect driver behavior.

This matters as netpoll will shortly call drivers with a budget of 0
to avoid receive packet processing happening in hard irq context.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/igb/igb_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index f81d87cfcc8d..d6b11522fed7 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -6946,7 +6946,7 @@ static bool igb_clean_rx_irq(struct igb_q_vector *q_vector, const int budget)
 	unsigned int total_bytes = 0, total_packets = 0;
 	u16 cleaned_count = igb_desc_unused(rx_ring);
 
-	do {
+	while (likely(total_packets < budget)) {
 		union e1000_adv_rx_desc *rx_desc;
 
 		/* return some buffers to hardware, one at a time is too slow */
@@ -6998,7 +6998,7 @@ static bool igb_clean_rx_irq(struct igb_q_vector *q_vector, const int budget)
 
 		/* update budget accounting */
 		total_packets++;
-	} while (likely(total_packets < budget));
+	}
 
 	/* place incomplete frames back on ring for completion */
 	rx_ring->skb = skb;
-- 
cgit v1.2.2


From fdabfc8a74c713f4e4318715d449651f798db74a Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Fri, 14 Mar 2014 18:00:41 -0700
Subject: ixgbe: Don't receive packets when the napi budget == 0

Processing any incoming packets with a with a napi budget of 0
is incorrect driver behavior.

This matters as netpoll will shortly call drivers with a budget of 0
to avoid receive packet processing happening in hard irq context.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 5d314fe873bb..18cd8ca319ea 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -2076,7 +2076,7 @@ static int ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
 #endif /* IXGBE_FCOE */
 	u16 cleaned_count = ixgbe_desc_unused(rx_ring);
 
-	do {
+	while (likely(total_rx_packets < budget)) {
 		union ixgbe_adv_rx_desc *rx_desc;
 		struct sk_buff *skb;
 
@@ -2151,7 +2151,7 @@ static int ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
 
 		/* update budget accounting */
 		total_rx_packets++;
-	} while (likely(total_rx_packets < budget));
+	}
 
 	u64_stats_update_begin(&rx_ring->syncp);
 	rx_ring->stats.packets += total_rx_packets;
-- 
cgit v1.2.2


From 278d5385b148c87d3652886af3c17ea65e1f26da Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Fri, 14 Mar 2014 18:01:11 -0700
Subject: amd8111e: Don't receive packets when the napi budget == 0

Processing any incoming packets with a with a napi budget of 0
is incorrect driver behavior.

This matters as netpoll will shortly call drivers with a budget of 0
to avoid receive packet processing happening in hard irq context.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/amd/amd8111e.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/amd/amd8111e.c b/drivers/net/ethernet/amd/amd8111e.c
index 2061b471fd16..26efaaa5e73f 100644
--- a/drivers/net/ethernet/amd/amd8111e.c
+++ b/drivers/net/ethernet/amd/amd8111e.c
@@ -720,6 +720,9 @@ static int amd8111e_rx_poll(struct napi_struct *napi, int budget)
 	int rx_pkt_limit = budget;
 	unsigned long flags;
 
+	if (rx_pkt_limit <= 0)
+		goto rx_not_empty;
+
 	do{
 		/* process receive packets until we use the quota*/
 		/* If we own the next entry, it's a new packet. Send it up. */
-- 
cgit v1.2.2


From 4c50254902dc57e5f6a52ed601a4b8f976f2ed81 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Fri, 14 Mar 2014 18:02:08 -0700
Subject: enic: Don't receive packets when the napi budget == 0

Processing any incoming packets with a with a napi budget of 0
is incorrect driver behavior.

This matters as netpoll will shortly call drivers with a budget of 0
to avoid receive packet processing happening in hard irq context.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/cisco/enic/enic_main.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/cisco/enic/enic_main.c b/drivers/net/ethernet/cisco/enic/enic_main.c
index dcd58f23834a..4c35fc8fad99 100644
--- a/drivers/net/ethernet/cisco/enic/enic_main.c
+++ b/drivers/net/ethernet/cisco/enic/enic_main.c
@@ -1086,14 +1086,15 @@ static int enic_poll(struct napi_struct *napi, int budget)
 	unsigned int intr = enic_legacy_io_intr();
 	unsigned int rq_work_to_do = budget;
 	unsigned int wq_work_to_do = -1; /* no limit */
-	unsigned int  work_done, rq_work_done, wq_work_done;
+	unsigned int  work_done, rq_work_done = 0, wq_work_done;
 	int err;
 
 	/* Service RQ (first) and WQ
 	 */
 
-	rq_work_done = vnic_cq_service(&enic->cq[cq_rq],
-		rq_work_to_do, enic_rq_service, NULL);
+	if (budget > 0)
+		rq_work_done = vnic_cq_service(&enic->cq[cq_rq],
+			rq_work_to_do, enic_rq_service, NULL);
 
 	wq_work_done = vnic_cq_service(&enic->cq[cq_wq],
 		wq_work_to_do, enic_wq_service, NULL);
@@ -1141,14 +1142,15 @@ static int enic_poll_msix(struct napi_struct *napi, int budget)
 	unsigned int cq = enic_cq_rq(enic, rq);
 	unsigned int intr = enic_msix_rq_intr(enic, rq);
 	unsigned int work_to_do = budget;
-	unsigned int work_done;
+	unsigned int work_done = 0;
 	int err;
 
 	/* Service RQ
 	 */
 
-	work_done = vnic_cq_service(&enic->cq[cq],
-		work_to_do, enic_rq_service, NULL);
+	if (budget > 0)
+		work_done = vnic_cq_service(&enic->cq[cq],
+			work_to_do, enic_rq_service, NULL);
 
 	/* Return intr event credits for this polling
 	 * cycle.  An intr event is the completion of a
-- 
cgit v1.2.2


From 9b2c05713edb56a338536ab26541e155763c0961 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Fri, 14 Mar 2014 18:03:23 -0700
Subject: fs_enet: Don't receive packets when the napi budget == 0

Processing any incoming packets with a with a napi budget of 0
is incorrect driver behavior.

This matters as netpoll will shortly call drivers with a budget of 0
to avoid receive packet processing happening in hard irq context.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c b/drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c
index 62f042d4aaa9..dc80db41d6b3 100644
--- a/drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c
+++ b/drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c
@@ -91,6 +91,9 @@ static int fs_enet_rx_napi(struct napi_struct *napi, int budget)
 	u16 pkt_len, sc;
 	int curidx;
 
+	if (budget <= 0)
+		return received;
+
 	/*
 	 * First, grab all of the stats for the incoming packet.
 	 * These get messed up if we get called due to a busy condition.
-- 
cgit v1.2.2


From cb013ea12cf71fe5ec2f7939909cec4491409724 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Fri, 14 Mar 2014 18:03:50 -0700
Subject: ibmveth: Don't receive packets when the napi budget == 0

Processing any incoming packets with a with a napi budget of 0
is incorrect driver behavior.

This matters as netpoll will shortly call drivers with a budget of 0
to avoid receive packet processing happening in hard irq context.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/ibm/ibmveth.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/ibm/ibmveth.c b/drivers/net/ethernet/ibm/ibmveth.c
index 1fc8334fc181..e75bdfcd1374 100644
--- a/drivers/net/ethernet/ibm/ibmveth.c
+++ b/drivers/net/ethernet/ibm/ibmveth.c
@@ -1072,7 +1072,7 @@ static int ibmveth_poll(struct napi_struct *napi, int budget)
 	unsigned long lpar_rc;
 
 restart_poll:
-	do {
+	while (frames_processed < budget) {
 		if (!ibmveth_rxq_pending_buffer(adapter))
 			break;
 
@@ -1121,7 +1121,7 @@ restart_poll:
 			netdev->stats.rx_bytes += length;
 			frames_processed++;
 		}
-	} while (frames_processed < budget);
+	}
 
 	ibmveth_replenish_task(adapter);
 
-- 
cgit v1.2.2


From 21ceda26d7418c688dd9186eb46a49c4c0887e61 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Fri, 14 Mar 2014 18:05:26 -0700
Subject: sky2: Don't receive packets when the napi budget == 0

Processing any incoming packets with a with a napi budget of 0
is incorrect driver behavior.

This matters as netpoll will shortly call drivers with a budget of 0
to avoid receive packet processing happening in hard irq context.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/marvell/sky2.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c
index 5a5b23741179..d524676fdff4 100644
--- a/drivers/net/ethernet/marvell/sky2.c
+++ b/drivers/net/ethernet/marvell/sky2.c
@@ -2735,6 +2735,9 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx)
 	unsigned int total_bytes[2] = { 0 };
 	unsigned int total_packets[2] = { 0 };
 
+	if (to_do <= 0)
+		return work_done;
+
 	rmb();
 	do {
 		struct sky2_port *sky2;
-- 
cgit v1.2.2


From 38be0a347c91133843474e12baacd252d0fd1c30 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Fri, 14 Mar 2014 18:05:58 -0700
Subject: mlx4: Don't receive packets when the napi budget == 0

Processing any incoming packets with a with a napi budget of 0
is incorrect driver behavior.

This matters as netpoll will shortly call drivers with a budget of 0
to avoid receive packet processing happening in hard irq context.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/mellanox/mlx4/en_rx.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/mellanox/mlx4/en_rx.c b/drivers/net/ethernet/mellanox/mlx4/en_rx.c
index 8afb72ec957d..ba049ae88749 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_rx.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_rx.c
@@ -661,6 +661,9 @@ int mlx4_en_process_rx_cq(struct net_device *dev, struct mlx4_en_cq *cq, int bud
 	if (!priv->port_up)
 		return 0;
 
+	if (budget <= 0)
+		return polled;
+
 	/* We assume a 1:1 mapping between CQEs and Rx descriptors, so Rx
 	 * descriptor offset can be deduced from the CQE index instead of
 	 * reading 'cqe->index' */
-- 
cgit v1.2.2


From 99a09c26a8f353bc35087ffa8cc47ffdd6d5d5bc Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Fri, 14 Mar 2014 18:06:26 -0700
Subject: s2io: Don't receive packets when the napi budget == 0

Processing any incoming packets with a with a napi budget of 0
is incorrect driver behavior.

This matters as netpoll will shortly call drivers with a budget of 0
to avoid receive packet processing happening in hard irq context.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/neterion/s2io.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/neterion/s2io.c b/drivers/net/ethernet/neterion/s2io.c
index 56e3a9d42bb2..d44fdb91808e 100644
--- a/drivers/net/ethernet/neterion/s2io.c
+++ b/drivers/net/ethernet/neterion/s2io.c
@@ -2914,6 +2914,9 @@ static int rx_intr_handler(struct ring_info *ring_data, int budget)
 	struct RxD1 *rxdp1;
 	struct RxD3 *rxdp3;
 
+	if (budget <= 0)
+		return napi_pkts;
+
 	get_info = ring_data->rx_curr_get_info;
 	get_block = get_info.block_index;
 	memcpy(&put_info, &ring_data->rx_curr_put_info, sizeof(put_info));
-- 
cgit v1.2.2


From d110ec4533261e7f9d89bfeeae80cc50fd9e7468 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Fri, 14 Mar 2014 18:08:21 -0700
Subject: tilegx: Don't receive packets when the napi budget == 0

Processing any incoming packets with a with a napi budget of 0
is incorrect driver behavior.

This matters as netpoll will shortly call drivers with a budget of 0
to avoid receive packet processing happening in hard irq context.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/tile/tilegx.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/tile/tilegx.c b/drivers/net/ethernet/tile/tilegx.c
index 17503da9f7a5..b43f1b3b9632 100644
--- a/drivers/net/ethernet/tile/tilegx.c
+++ b/drivers/net/ethernet/tile/tilegx.c
@@ -659,6 +659,9 @@ static int tile_net_poll(struct napi_struct *napi, int budget)
 	struct info_mpipe *info_mpipe =
 		container_of(napi, struct info_mpipe, napi);
 
+	if (budget <= 0)
+		goto done;
+
 	instance = info_mpipe->instance;
 	while ((n = gxio_mpipe_iqueue_try_peek(
 			&info_mpipe->iqueue,
-- 
cgit v1.2.2


From d1def91cd7fcc82ac0bea9a46b5e31a7a005ecb6 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Fri, 14 Mar 2014 18:09:01 -0700
Subject: tilepro: Don't receive packets when the napi budget == 0

Processing any incoming packets with a with a napi budget of 0
is incorrect driver behavior.

This matters as netpoll will shortly call drivers with a budget of 0
to avoid receive packet processing happening in hard irq context.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/tile/tilepro.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/tile/tilepro.c b/drivers/net/ethernet/tile/tilepro.c
index 7e33973487ee..b94449b4bd34 100644
--- a/drivers/net/ethernet/tile/tilepro.c
+++ b/drivers/net/ethernet/tile/tilepro.c
@@ -831,6 +831,9 @@ static int tile_net_poll(struct napi_struct *napi, int budget)
 
 	unsigned int work = 0;
 
+	if (budget <= 0)
+		goto done;
+
 	while (priv->active) {
 		int index = qup->__packet_receive_read;
 		if (index == qsp->__packet_receive_queue.__packet_write)
-- 
cgit v1.2.2


From 176f792f571ffef6d86b4254424cc05bb3874c9e Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Fri, 14 Mar 2014 18:10:14 -0700
Subject: tc35815: Don't receive packets when the napi budget == 0

Processing any incoming packets with a with a napi budget of 0
is incorrect driver behavior.

This matters as netpoll will shortly call drivers with a budget of 0
to avoid receive packet processing happening in hard irq context.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/toshiba/tc35815.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/toshiba/tc35815.c b/drivers/net/ethernet/toshiba/tc35815.c
index 88e9c73cebc0..fef5573dbfca 100644
--- a/drivers/net/ethernet/toshiba/tc35815.c
+++ b/drivers/net/ethernet/toshiba/tc35815.c
@@ -1645,6 +1645,9 @@ static int tc35815_poll(struct napi_struct *napi, int budget)
 	int received = 0, handled;
 	u32 status;
 
+	if (budget <= 0)
+		return received;
+
 	spin_lock(&lp->rx_lock);
 	status = tc_readl(&tr->Int_Src);
 	do {
-- 
cgit v1.2.2


From c7b82cc8d95e69afe2dc1038fb73abc048a3bca5 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Fri, 14 Mar 2014 18:10:50 -0700
Subject: vxge: Don't receive packets when the napi budget == 0

Processing any incoming packets with a with a napi budget of 0
is incorrect driver behavior.

This matters as netpoll will shortly call drivers with a budget of 0
to avoid receive packet processing happening in hard irq context.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/neterion/vxge/vxge-main.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/neterion/vxge/vxge-main.c b/drivers/net/ethernet/neterion/vxge/vxge-main.c
index c5bb1ace4a74..11adc89959c1 100644
--- a/drivers/net/ethernet/neterion/vxge/vxge-main.c
+++ b/drivers/net/ethernet/neterion/vxge/vxge-main.c
@@ -368,6 +368,9 @@ vxge_rx_1b_compl(struct __vxge_hw_ring *ringh, void *dtr,
 	vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d",
 		ring->ndev->name, __func__, __LINE__);
 
+	if (ring->budget <= 0)
+		goto out;
+
 	do {
 		prefetch((char *)dtr + L1_CACHE_BYTES);
 		rx_priv = vxge_hw_ring_rxd_private_get(dtr);
@@ -525,6 +528,7 @@ vxge_rx_1b_compl(struct __vxge_hw_ring *ringh, void *dtr,
 	if (first_dtr)
 		vxge_hw_ring_rxd_post_post_wmb(ringh, first_dtr);
 
+out:
 	vxge_debug_entryexit(VXGE_TRACE,
 				"%s:%d  Exiting...",
 				__func__, __LINE__);
-- 
cgit v1.2.2


From 75363a4676cdb046242d06dca6e8a9c0a20d6c4a Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Fri, 14 Mar 2014 18:11:22 -0700
Subject: sfc: Don't receive packets when the napi budget == 0

Processing any incoming packets with a with a napi budget of 0
is incorrect driver behavior.

This matters as netpoll will shortly call drivers with a budget of 0
to avoid receive packet processing happening in hard irq context.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/sfc/ef10.c  | 3 +++
 drivers/net/ethernet/sfc/farch.c | 3 +++
 2 files changed, 6 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/sfc/ef10.c b/drivers/net/ethernet/sfc/ef10.c
index eb75675f6e32..651626e133f9 100644
--- a/drivers/net/ethernet/sfc/ef10.c
+++ b/drivers/net/ethernet/sfc/ef10.c
@@ -1955,6 +1955,9 @@ static int efx_ef10_ev_process(struct efx_channel *channel, int quota)
 	int tx_descs = 0;
 	int spent = 0;
 
+	if (quota <= 0)
+		return spent;
+
 	read_ptr = channel->eventq_read_ptr;
 
 	for (;;) {
diff --git a/drivers/net/ethernet/sfc/farch.c b/drivers/net/ethernet/sfc/farch.c
index aa1b169f45ec..a08761360cdf 100644
--- a/drivers/net/ethernet/sfc/farch.c
+++ b/drivers/net/ethernet/sfc/farch.c
@@ -1248,6 +1248,9 @@ int efx_farch_ev_process(struct efx_channel *channel, int budget)
 	int tx_packets = 0;
 	int spent = 0;
 
+	if (budget <= 0)
+		return spent;
+
 	read_ptr = channel->eventq_read_ptr;
 
 	for (;;) {
-- 
cgit v1.2.2


From 833df4a81d06830bd4d24ad26b76656f62d5fac1 Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Sun, 16 Mar 2014 08:51:47 +0200
Subject: iwlwifi: mvm: fix merge damage

Scheduled scan was disabled because it was broken. Now it is
fixed and got disabled by mistake by a merge.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/mac80211.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index a6df00d675b7..de0e0df52314 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -365,7 +365,7 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm)
 	else
 		hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
 
-	if (0 && mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_SCHED_SCAN) {
+	if (mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_SCHED_SCAN) {
 		hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_SCHED_SCAN;
 		hw->wiphy->max_sched_scan_ssids = PROBE_OPTION_MAX;
 		hw->wiphy->max_match_sets = IWL_SCAN_MAX_PROFILES;
-- 
cgit v1.2.2


From 8930b05090acd321b1fc7c642528c697cb105c42 Mon Sep 17 00:00:00 2001
From: Eyal Shapira <eyal@wizery.com>
Date: Sun, 16 Mar 2014 05:23:21 +0200
Subject: iwlwifi: mvm: rs: fix search cycle rules

We should explore all possible columns when searching to be
as resilient as possible to changing conditions. This fixes
for example a scenario where even after a sudden creation of
rssi difference between the 2 antennas we would keep doing MIMO
at a low rate instead of switching to SISO at a higher rate using
the better antenna which was the optimal configuration.

Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/rs.c | 36 +++++++++++++++++------------------
 1 file changed, 18 insertions(+), 18 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.c b/drivers/net/wireless/iwlwifi/mvm/rs.c
index ad8334239106..4e16d7c92004 100644
--- a/drivers/net/wireless/iwlwifi/mvm/rs.c
+++ b/drivers/net/wireless/iwlwifi/mvm/rs.c
@@ -211,9 +211,9 @@ static const struct rs_tx_column rs_tx_columns[] = {
 		.next_columns = {
 			RS_COLUMN_LEGACY_ANT_B,
 			RS_COLUMN_SISO_ANT_A,
+			RS_COLUMN_SISO_ANT_B,
 			RS_COLUMN_MIMO2,
-			RS_COLUMN_INVALID,
-			RS_COLUMN_INVALID,
+			RS_COLUMN_MIMO2_SGI,
 		},
 	},
 	[RS_COLUMN_LEGACY_ANT_B] = {
@@ -221,10 +221,10 @@ static const struct rs_tx_column rs_tx_columns[] = {
 		.ant = ANT_B,
 		.next_columns = {
 			RS_COLUMN_LEGACY_ANT_A,
+			RS_COLUMN_SISO_ANT_A,
 			RS_COLUMN_SISO_ANT_B,
 			RS_COLUMN_MIMO2,
-			RS_COLUMN_INVALID,
-			RS_COLUMN_INVALID,
+			RS_COLUMN_MIMO2_SGI,
 		},
 	},
 	[RS_COLUMN_SISO_ANT_A] = {
@@ -234,8 +234,8 @@ static const struct rs_tx_column rs_tx_columns[] = {
 			RS_COLUMN_SISO_ANT_B,
 			RS_COLUMN_MIMO2,
 			RS_COLUMN_SISO_ANT_A_SGI,
-			RS_COLUMN_INVALID,
-			RS_COLUMN_INVALID,
+			RS_COLUMN_SISO_ANT_B_SGI,
+			RS_COLUMN_MIMO2_SGI,
 		},
 		.checks = {
 			rs_siso_allow,
@@ -248,8 +248,8 @@ static const struct rs_tx_column rs_tx_columns[] = {
 			RS_COLUMN_SISO_ANT_A,
 			RS_COLUMN_MIMO2,
 			RS_COLUMN_SISO_ANT_B_SGI,
-			RS_COLUMN_INVALID,
-			RS_COLUMN_INVALID,
+			RS_COLUMN_SISO_ANT_A_SGI,
+			RS_COLUMN_MIMO2_SGI,
 		},
 		.checks = {
 			rs_siso_allow,
@@ -263,8 +263,8 @@ static const struct rs_tx_column rs_tx_columns[] = {
 			RS_COLUMN_SISO_ANT_B_SGI,
 			RS_COLUMN_MIMO2_SGI,
 			RS_COLUMN_SISO_ANT_A,
-			RS_COLUMN_INVALID,
-			RS_COLUMN_INVALID,
+			RS_COLUMN_SISO_ANT_B,
+			RS_COLUMN_MIMO2,
 		},
 		.checks = {
 			rs_siso_allow,
@@ -279,8 +279,8 @@ static const struct rs_tx_column rs_tx_columns[] = {
 			RS_COLUMN_SISO_ANT_A_SGI,
 			RS_COLUMN_MIMO2_SGI,
 			RS_COLUMN_SISO_ANT_B,
-			RS_COLUMN_INVALID,
-			RS_COLUMN_INVALID,
+			RS_COLUMN_SISO_ANT_A,
+			RS_COLUMN_MIMO2,
 		},
 		.checks = {
 			rs_siso_allow,
@@ -292,10 +292,10 @@ static const struct rs_tx_column rs_tx_columns[] = {
 		.ant = ANT_AB,
 		.next_columns = {
 			RS_COLUMN_SISO_ANT_A,
+			RS_COLUMN_SISO_ANT_B,
+			RS_COLUMN_SISO_ANT_A_SGI,
+			RS_COLUMN_SISO_ANT_B_SGI,
 			RS_COLUMN_MIMO2_SGI,
-			RS_COLUMN_INVALID,
-			RS_COLUMN_INVALID,
-			RS_COLUMN_INVALID,
 		},
 		.checks = {
 			rs_mimo_allow,
@@ -307,10 +307,10 @@ static const struct rs_tx_column rs_tx_columns[] = {
 		.sgi = true,
 		.next_columns = {
 			RS_COLUMN_SISO_ANT_A_SGI,
+			RS_COLUMN_SISO_ANT_B_SGI,
+			RS_COLUMN_SISO_ANT_A,
+			RS_COLUMN_SISO_ANT_B,
 			RS_COLUMN_MIMO2,
-			RS_COLUMN_INVALID,
-			RS_COLUMN_INVALID,
-			RS_COLUMN_INVALID,
 		},
 		.checks = {
 			rs_mimo_allow,
-- 
cgit v1.2.2


From 7f5bd0422e0a85dc48418de3950b7726f3fc5a7d Mon Sep 17 00:00:00 2001
From: Eyal Shapira <eyal@wizery.com>
Date: Thu, 13 Mar 2014 13:53:00 +0200
Subject: iwlwifi: mvm: don't enable protection for all AMPDUs

Currently RTS protection was done whenever trasnmitting an AMPDU.
This limits throughput in cases where there's no need for protection.
Disable this too inclusive protection for now.

Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/tx.c | 3 ---
 1 file changed, 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/tx.c b/drivers/net/wireless/iwlwifi/mvm/tx.c
index 0e3f45a8553e..21ab59ce5406 100644
--- a/drivers/net/wireless/iwlwifi/mvm/tx.c
+++ b/drivers/net/wireless/iwlwifi/mvm/tx.c
@@ -127,9 +127,6 @@ static void iwl_mvm_set_tx_cmd(struct iwl_mvm *mvm, struct sk_buff *skb,
 		tx_cmd->pm_frame_timeout = 0;
 	}
 
-	if (info->flags & IEEE80211_TX_CTL_AMPDU)
-		tx_flags |= TX_CMD_FLG_PROT_REQUIRE;
-
 	if (ieee80211_is_data(fc) && len > mvm->rts_threshold &&
 	    !is_multicast_ether_addr(ieee80211_get_DA(hdr)))
 		tx_flags |= TX_CMD_FLG_PROT_REQUIRE;
-- 
cgit v1.2.2


From 0bd3c5a7abb1a4d280c9a209ac3ee17d67b60acb Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Mon, 10 Mar 2014 16:07:04 +0200
Subject: iwlwifi: rs: split rs_collect_tx_data

Make _rs_collect_tx_data get window as param, in order
to be able to set various windows.

This will be used later for saving tpc statistics
as well.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/rs.c | 27 ++++++++++++++++++---------
 1 file changed, 18 insertions(+), 9 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.c b/drivers/net/wireless/iwlwifi/mvm/rs.c
index 4e16d7c92004..953c33f4dd42 100644
--- a/drivers/net/wireless/iwlwifi/mvm/rs.c
+++ b/drivers/net/wireless/iwlwifi/mvm/rs.c
@@ -566,19 +566,13 @@ static s32 get_expected_tpt(struct iwl_scale_tbl_info *tbl, int rs_index)
  * at this rate.  window->data contains the bitmask of successful
  * packets.
  */
-static int rs_collect_tx_data(struct iwl_scale_tbl_info *tbl,
-			      int scale_index, int attempts, int successes)
+static int _rs_collect_tx_data(struct iwl_scale_tbl_info *tbl,
+			       int scale_index, int attempts, int successes,
+			       struct iwl_rate_scale_data *window)
 {
-	struct iwl_rate_scale_data *window = NULL;
 	static const u64 mask = (((u64)1) << (IWL_RATE_MAX_WINDOW - 1));
 	s32 fail_count, tpt;
 
-	if (scale_index < 0 || scale_index >= IWL_RATE_COUNT)
-		return -EINVAL;
-
-	/* Select window for current tx bit rate */
-	window = &(tbl->win[scale_index]);
-
 	/* Get expected throughput */
 	tpt = get_expected_tpt(tbl, scale_index);
 
@@ -636,6 +630,21 @@ static int rs_collect_tx_data(struct iwl_scale_tbl_info *tbl,
 	return 0;
 }
 
+static int rs_collect_tx_data(struct iwl_scale_tbl_info *tbl,
+			      int scale_index, int attempts, int successes)
+{
+	struct iwl_rate_scale_data *window = NULL;
+
+	if (scale_index < 0 || scale_index >= IWL_RATE_COUNT)
+		return -EINVAL;
+
+	/* Select window for current tx bit rate */
+	window = &(tbl->win[scale_index]);
+
+	return _rs_collect_tx_data(tbl, scale_index, attempts, successes,
+				   window);
+}
+
 /* Convert rs_rate object into ucode rate bitmask */
 static u32 ucode_rate_from_rs_rate(struct iwl_mvm *mvm,
 				  struct rs_rate *rate)
-- 
cgit v1.2.2


From 3ca71f603bb1a0f55e1ba24618ba45617bc36f70 Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Mon, 10 Mar 2014 16:33:43 +0200
Subject: iwlwifi: add rs_rate_scale_clear_tbl_windows helper function

instead of duplicating the same loop multiple times,
use a new function for it.

this will be later used also for clearing other
windows in the table.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/rs.c | 23 ++++++++++++-----------
 1 file changed, 12 insertions(+), 11 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.c b/drivers/net/wireless/iwlwifi/mvm/rs.c
index 953c33f4dd42..568abd61b14f 100644
--- a/drivers/net/wireless/iwlwifi/mvm/rs.c
+++ b/drivers/net/wireless/iwlwifi/mvm/rs.c
@@ -503,6 +503,14 @@ static void rs_rate_scale_clear_window(struct iwl_rate_scale_data *window)
 	window->average_tpt = IWL_INVALID_VALUE;
 }
 
+static void rs_rate_scale_clear_tbl_windows(struct iwl_scale_tbl_info *tbl)
+{
+	int i;
+
+	for (i = 0; i < IWL_RATE_COUNT; i++)
+		rs_rate_scale_clear_window(&tbl->win[i]);
+}
+
 static inline u8 rs_is_valid_ant(u8 valid_antenna, u8 ant_type)
 {
 	return (ant_type & valid_antenna) == ant_type;
@@ -1370,7 +1378,6 @@ static u32 rs_bw_from_sta_bw(struct ieee80211_sta *sta)
 static void rs_stay_in_table(struct iwl_lq_sta *lq_sta, bool force_search)
 {
 	struct iwl_scale_tbl_info *tbl;
-	int i;
 	int active_tbl;
 	int flush_interval_passed = 0;
 	struct iwl_mvm *mvm;
@@ -1431,9 +1438,7 @@ static void rs_stay_in_table(struct iwl_lq_sta *lq_sta, bool force_search)
 
 				IWL_DEBUG_RATE(mvm,
 					       "LQ: stay in table clear win\n");
-				for (i = 0; i < IWL_RATE_COUNT; i++)
-					rs_rate_scale_clear_window(
-						&(tbl->win[i]));
+				rs_rate_scale_clear_tbl_windows(tbl);
 			}
 		}
 
@@ -1442,8 +1447,7 @@ static void rs_stay_in_table(struct iwl_lq_sta *lq_sta, bool force_search)
 		 * "search" table). */
 		if (lq_sta->rs_state == RS_STATE_SEARCH_CYCLE_STARTED) {
 			IWL_DEBUG_RATE(mvm, "Clearing up window stats\n");
-			for (i = 0; i < IWL_RATE_COUNT; i++)
-				rs_rate_scale_clear_window(&(tbl->win[i]));
+			rs_rate_scale_clear_tbl_windows(tbl);
 		}
 	}
 }
@@ -1733,7 +1737,6 @@ static void rs_rate_scale_perform(struct iwl_mvm *mvm,
 	int low = IWL_RATE_INVALID;
 	int high = IWL_RATE_INVALID;
 	int index;
-	int i;
 	struct iwl_rate_scale_data *window = NULL;
 	int current_tpt = IWL_INVALID_VALUE;
 	int low_tpt = IWL_INVALID_VALUE;
@@ -2018,8 +2021,7 @@ lq_update:
 		if (lq_sta->search_better_tbl) {
 			/* Access the "search" table, clear its history. */
 			tbl = &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
-			for (i = 0; i < IWL_RATE_COUNT; i++)
-				rs_rate_scale_clear_window(&(tbl->win[i]));
+			rs_rate_scale_clear_tbl_windows(tbl);
 
 			/* Use new "search" start rate */
 			index = tbl->rate.index;
@@ -2340,8 +2342,7 @@ void iwl_mvm_rs_rate_init(struct iwl_mvm *mvm, struct ieee80211_sta *sta,
 	lq_sta->lq.sta_id = sta_priv->sta_id;
 
 	for (j = 0; j < LQ_SIZE; j++)
-		for (i = 0; i < IWL_RATE_COUNT; i++)
-			rs_rate_scale_clear_window(&lq_sta->lq_info[j].win[i]);
+		rs_rate_scale_clear_tbl_windows(&lq_sta->lq_info[j]);
 
 	lq_sta->flush_timer = 0;
 
-- 
cgit v1.2.2


From 1f00c721391aaf9ba6ae52dd4cb54d668f1c5408 Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Wed, 12 Mar 2014 09:36:41 +0200
Subject: iwlwifi: mvm: don't fail completely if led mode is not supported

Blink led mode is not supported by iwlmvm. This doesn't mean
that we should prevent any operation if it is selected by
the user.
Instead of failing without any notice to the user, fallback
to the default mode (RF mode) if the blink mode
is selected and print an error to inform the user.

Reported-by: Steven Haigh <netwiz@crc.id.au>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/led.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/led.c b/drivers/net/wireless/iwlwifi/mvm/led.c
index 6b4ea6bf8ffe..e3b3cf4dbd77 100644
--- a/drivers/net/wireless/iwlwifi/mvm/led.c
+++ b/drivers/net/wireless/iwlwifi/mvm/led.c
@@ -94,6 +94,8 @@ int iwl_mvm_leds_init(struct iwl_mvm *mvm)
 	int ret;
 
 	switch (mode) {
+	case IWL_LED_BLINK:
+		IWL_ERR(mvm, "Blink led mode not supported, used default\n");
 	case IWL_LED_DEFAULT:
 	case IWL_LED_RF_STATE:
 		mode = IWL_LED_RF_STATE;
-- 
cgit v1.2.2


From c63722cfd441bd3a99c65fa4c40bc65d7776e772 Mon Sep 17 00:00:00 2001
From: Alexander Bondar <alexander.bondar@intel.com>
Date: Mon, 10 Mar 2014 22:02:26 +0200
Subject: iwlwifi: mvm: Change beacon filter enablement condition

Enable beacon filter only if at least one beacon from candidate
AP is received before or after association. Check this condition before
enabling BF upon secured association completion. Add BF enablement to
mac80211 event that indicates beacon is received after association.
Too early beacon filtering enablement can lead to disconnection due to
missing AP's beacon after association.

Signed-off-by: Alexander Bondar <alexander.bondar@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/mac80211.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index de0e0df52314..66760e0b052e 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -1237,6 +1237,7 @@ static void iwl_mvm_bss_info_changed_station(struct iwl_mvm *mvm,
 		 */
 		iwl_mvm_remove_time_event(mvm, mvmvif,
 					  &mvmvif->time_event_data);
+		WARN_ON(iwl_mvm_enable_beacon_filter(mvm, vif, CMD_SYNC));
 	} else if (changes & (BSS_CHANGED_PS | BSS_CHANGED_P2P_PS |
 			      BSS_CHANGED_QOS)) {
 		ret = iwl_mvm_power_update_mac(mvm, vif);
@@ -1611,7 +1612,9 @@ static int iwl_mvm_mac_sta_state(struct ieee80211_hw *hw,
 	} else if (old_state == IEEE80211_STA_ASSOC &&
 		   new_state == IEEE80211_STA_AUTHORIZED) {
 		/* enable beacon filtering */
-		WARN_ON(iwl_mvm_enable_beacon_filter(mvm, vif, CMD_SYNC));
+		if (vif->bss_conf.dtim_period)
+			WARN_ON(iwl_mvm_enable_beacon_filter(mvm, vif,
+							     CMD_SYNC));
 		ret = 0;
 	} else if (old_state == IEEE80211_STA_AUTHORIZED &&
 		   new_state == IEEE80211_STA_ASSOC) {
-- 
cgit v1.2.2


From 1a95c8df7ed1ddf5e1d732a594f5a1b09da9a8c5 Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Thu, 21 Nov 2013 19:19:52 +0200
Subject: iwlwifi: mvm: configure seq_num to D0i3

Configure the QoS counters when entering D0i3.

The fw might use them later when performing protocol
offloading (we'll update the the counters back on
d0i3 exit in a following patch).

Non-QoS counter is handled internally in the fw, so
no need to configure it.

Also, add support for a new version of WOWLAN_CONFIG_CMD

Signed-off-by: Eliad Peller <eliad@wizery.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-fw.h         |   8 +
 drivers/net/wireless/iwlwifi/mvm/Makefile     |   2 +-
 drivers/net/wireless/iwlwifi/mvm/d3.c         | 189 ++++-------------------
 drivers/net/wireless/iwlwifi/mvm/fw-api-d3.h  |   8 +-
 drivers/net/wireless/iwlwifi/mvm/mvm.h        |   5 +-
 drivers/net/wireless/iwlwifi/mvm/offloading.c | 214 ++++++++++++++++++++++++++
 drivers/net/wireless/iwlwifi/mvm/ops.c        |  41 ++++-
 7 files changed, 300 insertions(+), 167 deletions(-)
 create mode 100644 drivers/net/wireless/iwlwifi/mvm/offloading.c

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-fw.h b/drivers/net/wireless/iwlwifi/iwl-fw.h
index 18f867c4df55..d14f19339d61 100644
--- a/drivers/net/wireless/iwlwifi/iwl-fw.h
+++ b/drivers/net/wireless/iwlwifi/iwl-fw.h
@@ -125,6 +125,14 @@ enum iwl_ucode_tlv_flag {
 	IWL_UCODE_TLV_FLAGS_GO_UAPSD		= BIT(30),
 };
 
+/**
+ * enum iwl_ucode_tlv_api - ucode api
+ * @IWL_UCODE_TLV_API_WOWLAN_CONFIG_TID: wowlan config includes tid field.
+ */
+enum iwl_ucode_tlv_api {
+	IWL_UCODE_TLV_API_WOWLAN_CONFIG_TID	= BIT(0),
+};
+
 /**
  * enum iwl_ucode_tlv_capa - ucode capabilities
  * @IWL_UCODE_TLV_CAPA_D0I3_SUPPORT: supports D0i3
diff --git a/drivers/net/wireless/iwlwifi/mvm/Makefile b/drivers/net/wireless/iwlwifi/mvm/Makefile
index 9798aa5b7645..ccdd3b7c4cce 100644
--- a/drivers/net/wireless/iwlwifi/mvm/Makefile
+++ b/drivers/net/wireless/iwlwifi/mvm/Makefile
@@ -3,7 +3,7 @@ iwlmvm-y += fw.o mac80211.o nvm.o ops.o phy-ctxt.o mac-ctxt.o
 iwlmvm-y += utils.o rx.o tx.o binding.o quota.o sta.o sf.o
 iwlmvm-y += scan.o time-event.o rs.o
 iwlmvm-y += power.o coex.o
-iwlmvm-y += led.o tt.o
+iwlmvm-y += led.o tt.o offloading.o
 iwlmvm-$(CONFIG_IWLWIFI_DEBUGFS) += debugfs.o debugfs-vif.o
 iwlmvm-$(CONFIG_PM_SLEEP) += d3.o
 
diff --git a/drivers/net/wireless/iwlwifi/mvm/d3.c b/drivers/net/wireless/iwlwifi/mvm/d3.c
index a08756456e10..02fb950c031c 100644
--- a/drivers/net/wireless/iwlwifi/mvm/d3.c
+++ b/drivers/net/wireless/iwlwifi/mvm/d3.c
@@ -376,139 +376,6 @@ static int iwl_mvm_send_patterns(struct iwl_mvm *mvm,
 	return err;
 }
 
-static int iwl_mvm_send_proto_offload(struct iwl_mvm *mvm,
-				      struct ieee80211_vif *vif)
-{
-	union {
-		struct iwl_proto_offload_cmd_v1 v1;
-		struct iwl_proto_offload_cmd_v2 v2;
-		struct iwl_proto_offload_cmd_v3_small v3s;
-		struct iwl_proto_offload_cmd_v3_large v3l;
-	} cmd = {};
-	struct iwl_host_cmd hcmd = {
-		.id = PROT_OFFLOAD_CONFIG_CMD,
-		.flags = CMD_SYNC,
-		.data[0] = &cmd,
-		.dataflags[0] = IWL_HCMD_DFL_DUP,
-	};
-	struct iwl_proto_offload_cmd_common *common;
-	u32 enabled = 0, size;
-	u32 capa_flags = mvm->fw->ucode_capa.flags;
-#if IS_ENABLED(CONFIG_IPV6)
-	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
-	int i;
-
-	if (capa_flags & IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL ||
-	    capa_flags & IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE) {
-		struct iwl_ns_config *nsc;
-		struct iwl_targ_addr *addrs;
-		int n_nsc, n_addrs;
-		int c;
-
-		if (capa_flags & IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL) {
-			nsc = cmd.v3s.ns_config;
-			n_nsc = IWL_PROTO_OFFLOAD_NUM_NS_CONFIG_V3S;
-			addrs = cmd.v3s.targ_addrs;
-			n_addrs = IWL_PROTO_OFFLOAD_NUM_IPV6_ADDRS_V3S;
-		} else {
-			nsc = cmd.v3l.ns_config;
-			n_nsc = IWL_PROTO_OFFLOAD_NUM_NS_CONFIG_V3L;
-			addrs = cmd.v3l.targ_addrs;
-			n_addrs = IWL_PROTO_OFFLOAD_NUM_IPV6_ADDRS_V3L;
-		}
-
-		if (mvmvif->num_target_ipv6_addrs)
-			enabled |= IWL_D3_PROTO_OFFLOAD_NS;
-
-		/*
-		 * For each address we have (and that will fit) fill a target
-		 * address struct and combine for NS offload structs with the
-		 * solicited node addresses.
-		 */
-		for (i = 0, c = 0;
-		     i < mvmvif->num_target_ipv6_addrs &&
-		     i < n_addrs && c < n_nsc; i++) {
-			struct in6_addr solicited_addr;
-			int j;
-
-			addrconf_addr_solict_mult(&mvmvif->target_ipv6_addrs[i],
-						  &solicited_addr);
-			for (j = 0; j < c; j++)
-				if (ipv6_addr_cmp(&nsc[j].dest_ipv6_addr,
-						  &solicited_addr) == 0)
-					break;
-			if (j == c)
-				c++;
-			addrs[i].addr = mvmvif->target_ipv6_addrs[i];
-			addrs[i].config_num = cpu_to_le32(j);
-			nsc[j].dest_ipv6_addr = solicited_addr;
-			memcpy(nsc[j].target_mac_addr, vif->addr, ETH_ALEN);
-		}
-
-		if (capa_flags & IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL)
-			cmd.v3s.num_valid_ipv6_addrs = cpu_to_le32(i);
-		else
-			cmd.v3l.num_valid_ipv6_addrs = cpu_to_le32(i);
-	} else if (capa_flags & IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS) {
-		if (mvmvif->num_target_ipv6_addrs) {
-			enabled |= IWL_D3_PROTO_OFFLOAD_NS;
-			memcpy(cmd.v2.ndp_mac_addr, vif->addr, ETH_ALEN);
-		}
-
-		BUILD_BUG_ON(sizeof(cmd.v2.target_ipv6_addr[0]) !=
-			     sizeof(mvmvif->target_ipv6_addrs[0]));
-
-		for (i = 0; i < min(mvmvif->num_target_ipv6_addrs,
-				    IWL_PROTO_OFFLOAD_NUM_IPV6_ADDRS_V2); i++)
-			memcpy(cmd.v2.target_ipv6_addr[i],
-			       &mvmvif->target_ipv6_addrs[i],
-			       sizeof(cmd.v2.target_ipv6_addr[i]));
-	} else {
-		if (mvmvif->num_target_ipv6_addrs) {
-			enabled |= IWL_D3_PROTO_OFFLOAD_NS;
-			memcpy(cmd.v1.ndp_mac_addr, vif->addr, ETH_ALEN);
-		}
-
-		BUILD_BUG_ON(sizeof(cmd.v1.target_ipv6_addr[0]) !=
-			     sizeof(mvmvif->target_ipv6_addrs[0]));
-
-		for (i = 0; i < min(mvmvif->num_target_ipv6_addrs,
-				    IWL_PROTO_OFFLOAD_NUM_IPV6_ADDRS_V1); i++)
-			memcpy(cmd.v1.target_ipv6_addr[i],
-			       &mvmvif->target_ipv6_addrs[i],
-			       sizeof(cmd.v1.target_ipv6_addr[i]));
-	}
-#endif
-
-	if (capa_flags & IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL) {
-		common = &cmd.v3s.common;
-		size = sizeof(cmd.v3s);
-	} else if (capa_flags & IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE) {
-		common = &cmd.v3l.common;
-		size = sizeof(cmd.v3l);
-	} else if (capa_flags & IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS) {
-		common = &cmd.v2.common;
-		size = sizeof(cmd.v2);
-	} else {
-		common = &cmd.v1.common;
-		size = sizeof(cmd.v1);
-	}
-
-	if (vif->bss_conf.arp_addr_cnt) {
-		enabled |= IWL_D3_PROTO_OFFLOAD_ARP;
-		common->host_ipv4_addr = vif->bss_conf.arp_addr_list[0];
-		memcpy(common->arp_mac_addr, vif->addr, ETH_ALEN);
-	}
-
-	if (!enabled)
-		return 0;
-
-	common->enabled = cpu_to_le32(enabled);
-
-	hcmd.len[0] = size;
-	return iwl_mvm_send_cmd(mvm, &hcmd);
-}
-
 enum iwl_mvm_tcp_packet_type {
 	MVM_TCP_TX_SYN,
 	MVM_TCP_RX_SYNACK,
@@ -927,6 +794,20 @@ void iwl_mvm_set_last_nonqos_seq(struct iwl_mvm *mvm, struct ieee80211_vif *vif)
 		IWL_ERR(mvm, "failed to set non-QoS seqno\n");
 }
 
+static int
+iwl_mvm_send_wowlan_config_cmd(struct iwl_mvm *mvm,
+			       const struct iwl_wowlan_config_cmd_v3 *cmd)
+{
+	/* start only with the v2 part of the command */
+	u16 cmd_len = sizeof(cmd->common);
+
+	if (mvm->fw->ucode_capa.api[0] & IWL_UCODE_TLV_API_WOWLAN_CONFIG_TID)
+		cmd_len = sizeof(*cmd);
+
+	return iwl_mvm_send_cmd_pdu(mvm, WOWLAN_CONFIGURATION, CMD_SYNC,
+				    cmd_len, cmd);
+}
+
 static int __iwl_mvm_suspend(struct ieee80211_hw *hw,
 			     struct cfg80211_wowlan *wowlan,
 			     bool test)
@@ -939,7 +820,7 @@ static int __iwl_mvm_suspend(struct ieee80211_hw *hw,
 	struct iwl_mvm_vif *mvmvif;
 	struct ieee80211_sta *ap_sta;
 	struct iwl_mvm_sta *mvm_ap_sta;
-	struct iwl_wowlan_config_cmd wowlan_config_cmd = {};
+	struct iwl_wowlan_config_cmd_v3 wowlan_config_cmd = {};
 	struct iwl_wowlan_kek_kck_material_cmd kek_kck_cmd = {};
 	struct iwl_wowlan_tkip_params_cmd tkip_cmd = {};
 	struct iwl_d3_manager_config d3_cfg_cmd_data = {
@@ -961,7 +842,7 @@ static int __iwl_mvm_suspend(struct ieee80211_hw *hw,
 		.tkip = &tkip_cmd,
 		.use_tkip = false,
 	};
-	int ret, i;
+	int ret;
 	int len __maybe_unused;
 
 	if (!wowlan) {
@@ -1002,49 +883,41 @@ static int __iwl_mvm_suspend(struct ieee80211_hw *hw,
 
 	mvm_ap_sta = (struct iwl_mvm_sta *)ap_sta->drv_priv;
 
-	/* TODO: wowlan_config_cmd.wowlan_ba_teardown_tids */
+	/* TODO: wowlan_config_cmd.common.wowlan_ba_teardown_tids */
 
-	wowlan_config_cmd.is_11n_connection = ap_sta->ht_cap.ht_supported;
+	wowlan_config_cmd.common.is_11n_connection =
+					ap_sta->ht_cap.ht_supported;
 
 	/* Query the last used seqno and set it */
 	ret = iwl_mvm_get_last_nonqos_seq(mvm, vif);
 	if (ret < 0)
 		goto out_noreset;
-	wowlan_config_cmd.non_qos_seq = cpu_to_le16(ret);
+	wowlan_config_cmd.common.non_qos_seq = cpu_to_le16(ret);
 
-	/*
-	 * For QoS counters, we store the one to use next, so subtract 0x10
-	 * since the uCode will add 0x10 *before* using the value while we
-	 * increment after using the value (i.e. store the next value to use).
-	 */
-	for (i = 0; i < IWL_MAX_TID_COUNT; i++) {
-		u16 seq = mvm_ap_sta->tid_data[i].seq_number;
-		seq -= 0x10;
-		wowlan_config_cmd.qos_seq[i] = cpu_to_le16(seq);
-	}
+	iwl_mvm_set_wowlan_qos_seq(mvm_ap_sta, &wowlan_config_cmd.common);
 
 	if (wowlan->disconnect)
-		wowlan_config_cmd.wakeup_filter |=
+		wowlan_config_cmd.common.wakeup_filter |=
 			cpu_to_le32(IWL_WOWLAN_WAKEUP_BEACON_MISS |
 				    IWL_WOWLAN_WAKEUP_LINK_CHANGE);
 	if (wowlan->magic_pkt)
-		wowlan_config_cmd.wakeup_filter |=
+		wowlan_config_cmd.common.wakeup_filter |=
 			cpu_to_le32(IWL_WOWLAN_WAKEUP_MAGIC_PACKET);
 	if (wowlan->gtk_rekey_failure)
-		wowlan_config_cmd.wakeup_filter |=
+		wowlan_config_cmd.common.wakeup_filter |=
 			cpu_to_le32(IWL_WOWLAN_WAKEUP_GTK_REKEY_FAIL);
 	if (wowlan->eap_identity_req)
-		wowlan_config_cmd.wakeup_filter |=
+		wowlan_config_cmd.common.wakeup_filter |=
 			cpu_to_le32(IWL_WOWLAN_WAKEUP_EAP_IDENT_REQ);
 	if (wowlan->four_way_handshake)
-		wowlan_config_cmd.wakeup_filter |=
+		wowlan_config_cmd.common.wakeup_filter |=
 			cpu_to_le32(IWL_WOWLAN_WAKEUP_4WAY_HANDSHAKE);
 	if (wowlan->n_patterns)
-		wowlan_config_cmd.wakeup_filter |=
+		wowlan_config_cmd.common.wakeup_filter |=
 			cpu_to_le32(IWL_WOWLAN_WAKEUP_PATTERN_MATCH);
 
 	if (wowlan->rfkill_release)
-		wowlan_config_cmd.wakeup_filter |=
+		wowlan_config_cmd.common.wakeup_filter |=
 			cpu_to_le32(IWL_WOWLAN_WAKEUP_RF_KILL_DEASSERT);
 
 	if (wowlan->tcp) {
@@ -1052,7 +925,7 @@ static int __iwl_mvm_suspend(struct ieee80211_hw *hw,
 		 * Set the "link change" (really "link lost") flag as well
 		 * since that implies losing the TCP connection.
 		 */
-		wowlan_config_cmd.wakeup_filter |=
+		wowlan_config_cmd.common.wakeup_filter |=
 			cpu_to_le32(IWL_WOWLAN_WAKEUP_REMOTE_LINK_LOSS |
 				    IWL_WOWLAN_WAKEUP_REMOTE_SIGNATURE_TABLE |
 				    IWL_WOWLAN_WAKEUP_REMOTE_WAKEUP_PACKET |
@@ -1150,9 +1023,7 @@ static int __iwl_mvm_suspend(struct ieee80211_hw *hw,
 		}
 	}
 
-	ret = iwl_mvm_send_cmd_pdu(mvm, WOWLAN_CONFIGURATION,
-				   CMD_SYNC, sizeof(wowlan_config_cmd),
-				   &wowlan_config_cmd);
+	ret = iwl_mvm_send_wowlan_config_cmd(mvm, &wowlan_config_cmd);
 	if (ret)
 		goto out;
 
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-d3.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-d3.h
index 521997669c99..10fcc1a79ebd 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api-d3.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-d3.h
@@ -239,7 +239,7 @@ enum iwl_wowlan_wakeup_filters {
 	IWL_WOWLAN_WAKEUP_BCN_FILTERING			= BIT(16),
 }; /* WOWLAN_WAKEUP_FILTER_API_E_VER_4 */
 
-struct iwl_wowlan_config_cmd {
+struct iwl_wowlan_config_cmd_v2 {
 	__le32 wakeup_filter;
 	__le16 non_qos_seq;
 	__le16 qos_seq[8];
@@ -247,6 +247,12 @@ struct iwl_wowlan_config_cmd {
 	u8 is_11n_connection;
 } __packed; /* WOWLAN_CONFIG_API_S_VER_2 */
 
+struct iwl_wowlan_config_cmd_v3 {
+	struct iwl_wowlan_config_cmd_v2 common;
+	u8 offloading_tid;
+	u8 reserved[3];
+} __packed; /* WOWLAN_CONFIG_API_S_VER_3 */
+
 /*
  * WOWLAN_TSC_RSC_PARAMS
  */
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index f77be762ebd9..095bc2669610 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -317,13 +317,13 @@ struct iwl_mvm_vif {
 
 	bool seqno_valid;
 	u16 seqno;
+#endif
 
 #if IS_ENABLED(CONFIG_IPV6)
 	/* IPv6 addresses for WoWLAN */
 	struct in6_addr target_ipv6_addrs[IWL_PROTO_OFFLOAD_NUM_IPV6_ADDRS_MAX];
 	int num_target_ipv6_addrs;
 #endif
-#endif
 
 #ifdef CONFIG_IWLWIFI_DEBUGFS
 	struct iwl_mvm *mvm;
@@ -896,6 +896,9 @@ iwl_mvm_set_last_nonqos_seq(struct iwl_mvm *mvm, struct ieee80211_vif *vif)
 {
 }
 #endif
+void iwl_mvm_set_wowlan_qos_seq(struct iwl_mvm_sta *mvm_ap_sta,
+				struct iwl_wowlan_config_cmd_v2 *cmd);
+int iwl_mvm_send_proto_offload(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
 
 /* D0i3 */
 void iwl_mvm_ref(struct iwl_mvm *mvm, enum iwl_mvm_ref_type ref_type);
diff --git a/drivers/net/wireless/iwlwifi/mvm/offloading.c b/drivers/net/wireless/iwlwifi/mvm/offloading.c
new file mode 100644
index 000000000000..9ec5a5991e3a
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/mvm/offloading.c
@@ -0,0 +1,214 @@
+/******************************************************************************
+ *
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called COPYING.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *  * Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  * Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  * Neither the name Intel Corporation nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *****************************************************************************/
+#include <net/ipv6.h>
+#include <net/addrconf.h>
+#include "mvm.h"
+
+void iwl_mvm_set_wowlan_qos_seq(struct iwl_mvm_sta *mvm_ap_sta,
+				struct iwl_wowlan_config_cmd_v2 *cmd)
+{
+	int i;
+
+	/*
+	 * For QoS counters, we store the one to use next, so subtract 0x10
+	 * since the uCode will add 0x10 *before* using the value while we
+	 * increment after using the value (i.e. store the next value to use).
+	 */
+	for (i = 0; i < IWL_MAX_TID_COUNT; i++) {
+		u16 seq = mvm_ap_sta->tid_data[i].seq_number;
+		seq -= 0x10;
+		cmd->qos_seq[i] = cpu_to_le16(seq);
+	}
+}
+
+int iwl_mvm_send_proto_offload(struct iwl_mvm *mvm, struct ieee80211_vif *vif)
+{
+	union {
+		struct iwl_proto_offload_cmd_v1 v1;
+		struct iwl_proto_offload_cmd_v2 v2;
+		struct iwl_proto_offload_cmd_v3_small v3s;
+		struct iwl_proto_offload_cmd_v3_large v3l;
+	} cmd = {};
+	struct iwl_host_cmd hcmd = {
+		.id = PROT_OFFLOAD_CONFIG_CMD,
+		.flags = CMD_SYNC,
+		.data[0] = &cmd,
+		.dataflags[0] = IWL_HCMD_DFL_DUP,
+	};
+	struct iwl_proto_offload_cmd_common *common;
+	u32 enabled = 0, size;
+	u32 capa_flags = mvm->fw->ucode_capa.flags;
+#if IS_ENABLED(CONFIG_IPV6)
+	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
+	int i;
+
+	if (capa_flags & IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL ||
+	    capa_flags & IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE) {
+		struct iwl_ns_config *nsc;
+		struct iwl_targ_addr *addrs;
+		int n_nsc, n_addrs;
+		int c;
+
+		if (capa_flags & IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL) {
+			nsc = cmd.v3s.ns_config;
+			n_nsc = IWL_PROTO_OFFLOAD_NUM_NS_CONFIG_V3S;
+			addrs = cmd.v3s.targ_addrs;
+			n_addrs = IWL_PROTO_OFFLOAD_NUM_IPV6_ADDRS_V3S;
+		} else {
+			nsc = cmd.v3l.ns_config;
+			n_nsc = IWL_PROTO_OFFLOAD_NUM_NS_CONFIG_V3L;
+			addrs = cmd.v3l.targ_addrs;
+			n_addrs = IWL_PROTO_OFFLOAD_NUM_IPV6_ADDRS_V3L;
+		}
+
+		if (mvmvif->num_target_ipv6_addrs)
+			enabled |= IWL_D3_PROTO_OFFLOAD_NS;
+
+		/*
+		 * For each address we have (and that will fit) fill a target
+		 * address struct and combine for NS offload structs with the
+		 * solicited node addresses.
+		 */
+		for (i = 0, c = 0;
+		     i < mvmvif->num_target_ipv6_addrs &&
+		     i < n_addrs && c < n_nsc; i++) {
+			struct in6_addr solicited_addr;
+			int j;
+
+			addrconf_addr_solict_mult(&mvmvif->target_ipv6_addrs[i],
+						  &solicited_addr);
+			for (j = 0; j < c; j++)
+				if (ipv6_addr_cmp(&nsc[j].dest_ipv6_addr,
+						  &solicited_addr) == 0)
+					break;
+			if (j == c)
+				c++;
+			addrs[i].addr = mvmvif->target_ipv6_addrs[i];
+			addrs[i].config_num = cpu_to_le32(j);
+			nsc[j].dest_ipv6_addr = solicited_addr;
+			memcpy(nsc[j].target_mac_addr, vif->addr, ETH_ALEN);
+		}
+
+		if (capa_flags & IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL)
+			cmd.v3s.num_valid_ipv6_addrs = cpu_to_le32(i);
+		else
+			cmd.v3l.num_valid_ipv6_addrs = cpu_to_le32(i);
+	} else if (capa_flags & IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS) {
+		if (mvmvif->num_target_ipv6_addrs) {
+			enabled |= IWL_D3_PROTO_OFFLOAD_NS;
+			memcpy(cmd.v2.ndp_mac_addr, vif->addr, ETH_ALEN);
+		}
+
+		BUILD_BUG_ON(sizeof(cmd.v2.target_ipv6_addr[0]) !=
+			     sizeof(mvmvif->target_ipv6_addrs[0]));
+
+		for (i = 0; i < min(mvmvif->num_target_ipv6_addrs,
+				    IWL_PROTO_OFFLOAD_NUM_IPV6_ADDRS_V2); i++)
+			memcpy(cmd.v2.target_ipv6_addr[i],
+			       &mvmvif->target_ipv6_addrs[i],
+			       sizeof(cmd.v2.target_ipv6_addr[i]));
+	} else {
+		if (mvmvif->num_target_ipv6_addrs) {
+			enabled |= IWL_D3_PROTO_OFFLOAD_NS;
+			memcpy(cmd.v1.ndp_mac_addr, vif->addr, ETH_ALEN);
+		}
+
+		BUILD_BUG_ON(sizeof(cmd.v1.target_ipv6_addr[0]) !=
+			     sizeof(mvmvif->target_ipv6_addrs[0]));
+
+		for (i = 0; i < min(mvmvif->num_target_ipv6_addrs,
+				    IWL_PROTO_OFFLOAD_NUM_IPV6_ADDRS_V1); i++)
+			memcpy(cmd.v1.target_ipv6_addr[i],
+			       &mvmvif->target_ipv6_addrs[i],
+			       sizeof(cmd.v1.target_ipv6_addr[i]));
+	}
+#endif
+
+	if (capa_flags & IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL) {
+		common = &cmd.v3s.common;
+		size = sizeof(cmd.v3s);
+	} else if (capa_flags & IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE) {
+		common = &cmd.v3l.common;
+		size = sizeof(cmd.v3l);
+	} else if (capa_flags & IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS) {
+		common = &cmd.v2.common;
+		size = sizeof(cmd.v2);
+	} else {
+		common = &cmd.v1.common;
+		size = sizeof(cmd.v1);
+	}
+
+	if (vif->bss_conf.arp_addr_cnt) {
+		enabled |= IWL_D3_PROTO_OFFLOAD_ARP;
+		common->host_ipv4_addr = vif->bss_conf.arp_addr_list[0];
+		memcpy(common->arp_mac_addr, vif->addr, ETH_ALEN);
+	}
+
+	if (!enabled)
+		return 0;
+
+	common->enabled = cpu_to_le32(enabled);
+
+	hcmd.len[0] = size;
+	return iwl_mvm_send_cmd(mvm, &hcmd);
+}
diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c
index 75fbc4054173..87c32e80904c 100644
--- a/drivers/net/wireless/iwlwifi/mvm/ops.c
+++ b/drivers/net/wireless/iwlwifi/mvm/ops.c
@@ -850,6 +850,33 @@ static void iwl_mvm_enter_d0i3_iterator(void *_data, u8 *mac,
 	data->vif_count++;
 }
 
+static void iwl_mvm_set_wowlan_data(struct iwl_mvm *mvm,
+				    struct iwl_wowlan_config_cmd_v3 *cmd,
+				    struct iwl_d0i3_iter_data *iter_data)
+{
+	struct ieee80211_sta *ap_sta;
+	struct iwl_mvm_sta *mvm_ap_sta;
+
+	if (iter_data->ap_sta_id == IWL_MVM_STATION_COUNT)
+		return;
+
+	rcu_read_lock();
+
+	ap_sta = rcu_dereference(mvm->fw_id_to_mac_id[iter_data->ap_sta_id]);
+	if (IS_ERR_OR_NULL(ap_sta))
+		goto out;
+
+	mvm_ap_sta = iwl_mvm_sta_from_mac80211(ap_sta);
+	cmd->common.is_11n_connection = ap_sta->ht_cap.ht_supported;
+
+	/*
+	 * The d0i3 uCode takes care of the nonqos counters,
+	 * so configure only the qos seq ones.
+	 */
+	iwl_mvm_set_wowlan_qos_seq(mvm_ap_sta, &cmd->common);
+out:
+	rcu_read_unlock();
+}
 static int iwl_mvm_enter_d0i3(struct iwl_op_mode *op_mode)
 {
 	struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode);
@@ -858,11 +885,14 @@ static int iwl_mvm_enter_d0i3(struct iwl_op_mode *op_mode)
 	struct iwl_d0i3_iter_data d0i3_iter_data = {
 		.mvm = mvm,
 	};
-	struct iwl_wowlan_config_cmd wowlan_config_cmd = {
-		.wakeup_filter = cpu_to_le32(IWL_WOWLAN_WAKEUP_RX_FRAME |
-					     IWL_WOWLAN_WAKEUP_BEACON_MISS |
-					     IWL_WOWLAN_WAKEUP_LINK_CHANGE |
-					     IWL_WOWLAN_WAKEUP_BCN_FILTERING),
+	struct iwl_wowlan_config_cmd_v3 wowlan_config_cmd = {
+		.common = {
+			.wakeup_filter =
+				cpu_to_le32(IWL_WOWLAN_WAKEUP_RX_FRAME |
+					    IWL_WOWLAN_WAKEUP_BEACON_MISS |
+					    IWL_WOWLAN_WAKEUP_LINK_CHANGE |
+					    IWL_WOWLAN_WAKEUP_BCN_FILTERING),
+		},
 	};
 	struct iwl_d3_manager_config d3_cfg_cmd = {
 		.min_sleep_time = cpu_to_le32(1000),
@@ -881,6 +911,7 @@ static int iwl_mvm_enter_d0i3(struct iwl_op_mode *op_mode)
 		mvm->d0i3_ap_sta_id = IWL_MVM_STATION_COUNT;
 	}
 
+	iwl_mvm_set_wowlan_data(mvm, &wowlan_config_cmd, &d0i3_iter_data);
 	ret = iwl_mvm_send_cmd_pdu(mvm, WOWLAN_CONFIGURATION, flags,
 				   sizeof(wowlan_config_cmd),
 				   &wowlan_config_cmd);
-- 
cgit v1.2.2


From b2492501d234ef7a99613576550126b88b377070 Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Thu, 13 Mar 2014 12:21:50 +0200
Subject: iwlwifi: mvm: reconfigure qos seq on D0i3 exit

In order to restore the qos seq number on d0i3 exit,
we need to read it from the wowlan status.

However, in order to make sure we use correct seq num
for tx frames, we need to defer any outgoing frames,
and re-enqueue them only after the seq num is configured
correctly.

Sync new Tx aggregations with D0i3 so that the correct
seq num is used for them. Wait synchronously for D0i3
exit before starting a new Tx agg.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/mac80211.c |  69 +++++++++++++++
 drivers/net/wireless/iwlwifi/mvm/mvm.h      |   9 ++
 drivers/net/wireless/iwlwifi/mvm/ops.c      | 132 ++++++++++++++++++++++++++++
 drivers/net/wireless/iwlwifi/mvm/sta.c      |  10 ++-
 4 files changed, 219 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index 66760e0b052e..48a8e67992f8 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -424,6 +424,47 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm)
 	return ret;
 }
 
+static bool iwl_mvm_defer_tx(struct iwl_mvm *mvm,
+			     struct ieee80211_sta *sta,
+			     struct sk_buff *skb)
+{
+	struct iwl_mvm_sta *mvmsta;
+	bool defer = false;
+
+	/*
+	 * double check the IN_D0I3 flag both before and after
+	 * taking the spinlock, in order to prevent taking
+	 * the spinlock when not needed.
+	 */
+	if (likely(!test_bit(IWL_MVM_STATUS_IN_D0I3, &mvm->status)))
+		return false;
+
+	spin_lock(&mvm->d0i3_tx_lock);
+	/*
+	 * testing the flag again ensures the skb dequeue
+	 * loop (on d0i3 exit) hasn't run yet.
+	 */
+	if (!test_bit(IWL_MVM_STATUS_IN_D0I3, &mvm->status))
+		goto out;
+
+	mvmsta = iwl_mvm_sta_from_mac80211(sta);
+	if (mvmsta->sta_id == IWL_MVM_STATION_COUNT ||
+	    mvmsta->sta_id != mvm->d0i3_ap_sta_id)
+		goto out;
+
+	__skb_queue_tail(&mvm->d0i3_tx, skb);
+	ieee80211_stop_queues(mvm->hw);
+
+	/* trigger wakeup */
+	iwl_mvm_ref(mvm, IWL_MVM_REF_TX);
+	iwl_mvm_unref(mvm, IWL_MVM_REF_TX);
+
+	defer = true;
+out:
+	spin_unlock(&mvm->d0i3_tx_lock);
+	return defer;
+}
+
 static void iwl_mvm_mac_tx(struct ieee80211_hw *hw,
 			   struct ieee80211_tx_control *control,
 			   struct sk_buff *skb)
@@ -451,6 +492,8 @@ static void iwl_mvm_mac_tx(struct ieee80211_hw *hw,
 		sta = NULL;
 
 	if (sta) {
+		if (iwl_mvm_defer_tx(mvm, sta, skb))
+			return;
 		if (iwl_mvm_tx_skb(mvm, skb, sta))
 			goto drop;
 		return;
@@ -471,6 +514,7 @@ static int iwl_mvm_mac_ampdu_action(struct ieee80211_hw *hw,
 {
 	struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw);
 	int ret;
+	bool tx_agg_ref = false;
 
 	IWL_DEBUG_HT(mvm, "A-MPDU action on addr %pM tid %d: action %d\n",
 		     sta->addr, tid, action);
@@ -478,6 +522,23 @@ static int iwl_mvm_mac_ampdu_action(struct ieee80211_hw *hw,
 	if (!(mvm->nvm_data->sku_cap_11n_enable))
 		return -EACCES;
 
+	/* return from D0i3 before starting a new Tx aggregation */
+	if (action == IEEE80211_AMPDU_TX_START) {
+		iwl_mvm_ref(mvm, IWL_MVM_REF_TX_AGG);
+		tx_agg_ref = true;
+
+		/*
+		 * wait synchronously until D0i3 exit to get the correct
+		 * sequence number for the tid
+		 */
+		if (!wait_event_timeout(mvm->d0i3_exit_waitq,
+			  !test_bit(IWL_MVM_STATUS_IN_D0I3, &mvm->status), HZ)) {
+			WARN_ON_ONCE(1);
+			iwl_mvm_unref(mvm, IWL_MVM_REF_TX_AGG);
+			return -EIO;
+		}
+	}
+
 	mutex_lock(&mvm->mutex);
 
 	switch (action) {
@@ -515,6 +576,13 @@ static int iwl_mvm_mac_ampdu_action(struct ieee80211_hw *hw,
 	}
 	mutex_unlock(&mvm->mutex);
 
+	/*
+	 * If the tid is marked as started, we won't use it for offloaded
+	 * traffic on the next D0i3 entry. It's safe to unref.
+	 */
+	if (tx_agg_ref)
+		iwl_mvm_unref(mvm, IWL_MVM_REF_TX_AGG);
+
 	return ret;
 }
 
@@ -592,6 +660,7 @@ static void iwl_mvm_mac_restart_complete(struct ieee80211_hw *hw)
 	mutex_lock(&mvm->mutex);
 
 	clear_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status);
+	iwl_mvm_d0i3_enable_tx(mvm, NULL);
 	ret = iwl_mvm_update_quotas(mvm, NULL);
 	if (ret)
 		IWL_ERR(mvm, "Failed to update quotas after restart (%d)\n",
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index 095bc2669610..d4f3c95a129e 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -230,6 +230,8 @@ enum iwl_mvm_ref_type {
 	IWL_MVM_REF_P2P_CLIENT,
 	IWL_MVM_REF_AP_IBSS,
 	IWL_MVM_REF_USER,
+	IWL_MVM_REF_TX,
+	IWL_MVM_REF_TX_AGG,
 
 	IWL_MVM_REF_COUNT,
 };
@@ -593,7 +595,12 @@ struct iwl_mvm {
 
 	/* d0i3 */
 	u8 d0i3_ap_sta_id;
+	bool d0i3_offloading;
 	struct work_struct d0i3_exit_work;
+	struct sk_buff_head d0i3_tx;
+	/* sync d0i3_tx queue and IWL_MVM_STATUS_IN_D0I3 status flag */
+	spinlock_t d0i3_tx_lock;
+	wait_queue_head_t d0i3_exit_waitq;
 
 	/* BT-Coex */
 	u8 bt_kill_msk;
@@ -634,6 +641,7 @@ enum iwl_mvm_status {
 	IWL_MVM_STATUS_HW_CTKILL,
 	IWL_MVM_STATUS_ROC_RUNNING,
 	IWL_MVM_STATUS_IN_HW_RESTART,
+	IWL_MVM_STATUS_IN_D0I3,
 };
 
 static inline bool iwl_mvm_is_radio_killed(struct iwl_mvm *mvm)
@@ -903,6 +911,7 @@ int iwl_mvm_send_proto_offload(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
 /* D0i3 */
 void iwl_mvm_ref(struct iwl_mvm *mvm, enum iwl_mvm_ref_type ref_type);
 void iwl_mvm_unref(struct iwl_mvm *mvm, enum iwl_mvm_ref_type ref_type);
+void iwl_mvm_d0i3_enable_tx(struct iwl_mvm *mvm, __le16 *qos_seq);
 
 /* BT Coex */
 int iwl_send_bt_prio_tbl(struct iwl_mvm *mvm);
diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c
index 87c32e80904c..a3e21f1ee315 100644
--- a/drivers/net/wireless/iwlwifi/mvm/ops.c
+++ b/drivers/net/wireless/iwlwifi/mvm/ops.c
@@ -410,6 +410,10 @@ iwl_op_mode_mvm_start(struct iwl_trans *trans, const struct iwl_cfg *cfg,
 	INIT_WORK(&mvm->sta_drained_wk, iwl_mvm_sta_drained_wk);
 	INIT_WORK(&mvm->d0i3_exit_work, iwl_mvm_d0i3_exit_work);
 
+	spin_lock_init(&mvm->d0i3_tx_lock);
+	skb_queue_head_init(&mvm->d0i3_tx);
+	init_waitqueue_head(&mvm->d0i3_exit_waitq);
+
 	SET_IEEE80211_DEV(mvm->hw, mvm->trans->dev);
 
 	/*
@@ -823,8 +827,62 @@ struct iwl_d0i3_iter_data {
 	struct iwl_mvm *mvm;
 	u8 ap_sta_id;
 	u8 vif_count;
+	u8 offloading_tid;
+	bool disable_offloading;
 };
 
+static bool iwl_mvm_disallow_offloading(struct iwl_mvm *mvm,
+					struct ieee80211_vif *vif,
+					struct iwl_d0i3_iter_data *iter_data)
+{
+	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
+	struct ieee80211_sta *ap_sta;
+	struct iwl_mvm_sta *mvmsta;
+	u32 available_tids = 0;
+	u8 tid;
+
+	if (WARN_ON(vif->type != NL80211_IFTYPE_STATION ||
+		    mvmvif->ap_sta_id == IWL_MVM_STATION_COUNT))
+		return false;
+
+	ap_sta = rcu_dereference(mvm->fw_id_to_mac_id[mvmvif->ap_sta_id]);
+	if (IS_ERR_OR_NULL(ap_sta))
+		return false;
+
+	mvmsta = iwl_mvm_sta_from_mac80211(ap_sta);
+	spin_lock_bh(&mvmsta->lock);
+	for (tid = 0; tid < IWL_MAX_TID_COUNT; tid++) {
+		struct iwl_mvm_tid_data *tid_data = &mvmsta->tid_data[tid];
+
+		/*
+		 * in case of pending tx packets, don't use this tid
+		 * for offloading in order to prevent reuse of the same
+		 * qos seq counters.
+		 */
+		if (iwl_mvm_tid_queued(tid_data))
+			continue;
+
+		if (tid_data->state != IWL_AGG_OFF)
+			continue;
+
+		available_tids |= BIT(tid);
+	}
+	spin_unlock_bh(&mvmsta->lock);
+
+	/*
+	 * disallow protocol offloading if we have no available tid
+	 * (with no pending frames and no active aggregation,
+	 * as we don't handle "holes" properly - the scheduler needs the
+	 * frame's seq number and TFD index to match)
+	 */
+	if (!available_tids)
+		return true;
+
+	/* for simplicity, just use the first available tid */
+	iter_data->offloading_tid = ffs(available_tids) - 1;
+	return false;
+}
+
 static void iwl_mvm_enter_d0i3_iterator(void *_data, u8 *mac,
 					struct ieee80211_vif *vif)
 {
@@ -838,6 +896,14 @@ static void iwl_mvm_enter_d0i3_iterator(void *_data, u8 *mac,
 	    !vif->bss_conf.assoc)
 		return;
 
+	/*
+	 * in case of pending tx packets or active aggregations,
+	 * avoid offloading features in order to prevent reuse of
+	 * the same qos seq counters.
+	 */
+	if (iwl_mvm_disallow_offloading(mvm, vif, data))
+		data->disable_offloading = true;
+
 	iwl_mvm_update_d0i3_power_mode(mvm, vif, true, flags);
 
 	/*
@@ -868,6 +934,7 @@ static void iwl_mvm_set_wowlan_data(struct iwl_mvm *mvm,
 
 	mvm_ap_sta = iwl_mvm_sta_from_mac80211(ap_sta);
 	cmd->common.is_11n_connection = ap_sta->ht_cap.ht_supported;
+	cmd->offloading_tid = iter_data->offloading_tid;
 
 	/*
 	 * The d0i3 uCode takes care of the nonqos counters,
@@ -900,15 +967,21 @@ static int iwl_mvm_enter_d0i3(struct iwl_op_mode *op_mode)
 
 	IWL_DEBUG_RPM(mvm, "MVM entering D0i3\n");
 
+	/* make sure we have no running tx while configuring the qos */
+	set_bit(IWL_MVM_STATUS_IN_D0I3, &mvm->status);
+	synchronize_net();
+
 	ieee80211_iterate_active_interfaces_atomic(mvm->hw,
 						   IEEE80211_IFACE_ITER_NORMAL,
 						   iwl_mvm_enter_d0i3_iterator,
 						   &d0i3_iter_data);
 	if (d0i3_iter_data.vif_count == 1) {
 		mvm->d0i3_ap_sta_id = d0i3_iter_data.ap_sta_id;
+		mvm->d0i3_offloading = !d0i3_iter_data.disable_offloading;
 	} else {
 		WARN_ON_ONCE(d0i3_iter_data.vif_count > 1);
 		mvm->d0i3_ap_sta_id = IWL_MVM_STATION_COUNT;
+		mvm->d0i3_offloading = false;
 	}
 
 	iwl_mvm_set_wowlan_data(mvm, &wowlan_config_cmd, &d0i3_iter_data);
@@ -948,6 +1021,62 @@ static void iwl_mvm_d0i3_disconnect_iter(void *data, u8 *mac,
 		ieee80211_connection_loss(vif);
 }
 
+void iwl_mvm_d0i3_enable_tx(struct iwl_mvm *mvm, __le16 *qos_seq)
+{
+	struct ieee80211_sta *sta = NULL;
+	struct iwl_mvm_sta *mvm_ap_sta;
+	int i;
+	bool wake_queues = false;
+
+	lockdep_assert_held(&mvm->mutex);
+
+	spin_lock_bh(&mvm->d0i3_tx_lock);
+
+	if (mvm->d0i3_ap_sta_id == IWL_MVM_STATION_COUNT)
+		goto out;
+
+	IWL_DEBUG_RPM(mvm, "re-enqueue packets\n");
+
+	/* get the sta in order to update seq numbers and re-enqueue skbs */
+	sta = rcu_dereference_protected(
+			mvm->fw_id_to_mac_id[mvm->d0i3_ap_sta_id],
+			lockdep_is_held(&mvm->mutex));
+
+	if (IS_ERR_OR_NULL(sta)) {
+		sta = NULL;
+		goto out;
+	}
+
+	if (mvm->d0i3_offloading && qos_seq) {
+		/* update qos seq numbers if offloading was enabled */
+		mvm_ap_sta = (struct iwl_mvm_sta *)sta->drv_priv;
+		for (i = 0; i < IWL_MAX_TID_COUNT; i++) {
+			u16 seq = le16_to_cpu(qos_seq[i]);
+			/* firmware stores last-used one, we store next one */
+			seq += 0x10;
+			mvm_ap_sta->tid_data[i].seq_number = seq;
+		}
+	}
+out:
+	/* re-enqueue (or drop) all packets */
+	while (!skb_queue_empty(&mvm->d0i3_tx)) {
+		struct sk_buff *skb = __skb_dequeue(&mvm->d0i3_tx);
+
+		if (!sta || iwl_mvm_tx_skb(mvm, skb, sta))
+			ieee80211_free_txskb(mvm->hw, skb);
+
+		/* if the skb_queue is not empty, we need to wake queues */
+		wake_queues = true;
+	}
+	clear_bit(IWL_MVM_STATUS_IN_D0I3, &mvm->status);
+	wake_up(&mvm->d0i3_exit_waitq);
+	mvm->d0i3_ap_sta_id = IWL_MVM_STATION_COUNT;
+	if (wake_queues)
+		ieee80211_wake_queues(mvm->hw);
+
+	spin_unlock_bh(&mvm->d0i3_tx_lock);
+}
+
 static void iwl_mvm_d0i3_exit_work(struct work_struct *wk)
 {
 	struct iwl_mvm *mvm = container_of(wk, struct iwl_mvm, d0i3_exit_work);
@@ -958,6 +1087,7 @@ static void iwl_mvm_d0i3_exit_work(struct work_struct *wk)
 	struct iwl_wowlan_status_v6 *status;
 	int ret;
 	u32 disconnection_reasons, wakeup_reasons;
+	__le16 *qos_seq = NULL;
 
 	mutex_lock(&mvm->mutex);
 	ret = iwl_mvm_send_cmd(mvm, &get_status_cmd);
@@ -969,6 +1099,7 @@ static void iwl_mvm_d0i3_exit_work(struct work_struct *wk)
 
 	status = (void *)get_status_cmd.resp_pkt->data;
 	wakeup_reasons = le32_to_cpu(status->wakeup_reasons);
+	qos_seq = status->qos_seq_ctr;
 
 	IWL_DEBUG_RPM(mvm, "wakeup reasons: 0x%x\n", wakeup_reasons);
 
@@ -982,6 +1113,7 @@ static void iwl_mvm_d0i3_exit_work(struct work_struct *wk)
 
 	iwl_free_resp(&get_status_cmd);
 out:
+	iwl_mvm_d0i3_enable_tx(mvm, qos_seq);
 	mutex_unlock(&mvm->mutex);
 }
 
diff --git a/drivers/net/wireless/iwlwifi/mvm/sta.c b/drivers/net/wireless/iwlwifi/mvm/sta.c
index 67393535a5fb..f339ef884250 100644
--- a/drivers/net/wireless/iwlwifi/mvm/sta.c
+++ b/drivers/net/wireless/iwlwifi/mvm/sta.c
@@ -902,10 +902,18 @@ int iwl_mvm_sta_tx_agg_start(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
 		return -EIO;
 	}
 
+	spin_lock_bh(&mvmsta->lock);
+
+	/* possible race condition - we entered D0i3 while starting agg */
+	if (test_bit(IWL_MVM_STATUS_IN_D0I3, &mvm->status)) {
+		spin_unlock_bh(&mvmsta->lock);
+		IWL_ERR(mvm, "Entered D0i3 while starting Tx agg\n");
+		return -EIO;
+	}
+
 	/* the new tx queue is still connected to the same mac80211 queue */
 	mvm->queue_to_mac80211[txq_id] = vif->hw_queue[tid_to_mac80211_ac[tid]];
 
-	spin_lock_bh(&mvmsta->lock);
 	tid_data = &mvmsta->tid_data[tid];
 	tid_data->ssn = IEEE80211_SEQ_TO_SN(tid_data->seq_number);
 	tid_data->txq_id = txq_id;
-- 
cgit v1.2.2


From 8bd22e7bb0b02c24b3c9997670bbb65e0e0a7371 Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Sun, 3 Nov 2013 19:48:50 +0200
Subject: iwlwifi: mvm: configure protocol offloading on D0i3

Enable protocol offloading (arp and NS) on D0i3.

The offloading allows the fw answer NS and arp requests
without waking up the host.

Since protocol offloading is saved between D0i3
entries, we have to explicitly disable it in
case we don't want it.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/d3.c         |  2 +-
 drivers/net/wireless/iwlwifi/mvm/mvm.h        |  5 ++++-
 drivers/net/wireless/iwlwifi/mvm/offloading.c | 13 +++++++------
 drivers/net/wireless/iwlwifi/mvm/ops.c        |  1 +
 4 files changed, 13 insertions(+), 8 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/d3.c b/drivers/net/wireless/iwlwifi/mvm/d3.c
index 02fb950c031c..e56f5a0edf85 100644
--- a/drivers/net/wireless/iwlwifi/mvm/d3.c
+++ b/drivers/net/wireless/iwlwifi/mvm/d3.c
@@ -1031,7 +1031,7 @@ static int __iwl_mvm_suspend(struct ieee80211_hw *hw,
 	if (ret)
 		goto out;
 
-	ret = iwl_mvm_send_proto_offload(mvm, vif);
+	ret = iwl_mvm_send_proto_offload(mvm, vif, false, CMD_SYNC);
 	if (ret)
 		goto out;
 
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index d4f3c95a129e..46fe81702963 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -906,7 +906,10 @@ iwl_mvm_set_last_nonqos_seq(struct iwl_mvm *mvm, struct ieee80211_vif *vif)
 #endif
 void iwl_mvm_set_wowlan_qos_seq(struct iwl_mvm_sta *mvm_ap_sta,
 				struct iwl_wowlan_config_cmd_v2 *cmd);
-int iwl_mvm_send_proto_offload(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
+int iwl_mvm_send_proto_offload(struct iwl_mvm *mvm,
+			       struct ieee80211_vif *vif,
+			       bool disable_offloading,
+			       u32 cmd_flags);
 
 /* D0i3 */
 void iwl_mvm_ref(struct iwl_mvm *mvm, enum iwl_mvm_ref_type ref_type);
diff --git a/drivers/net/wireless/iwlwifi/mvm/offloading.c b/drivers/net/wireless/iwlwifi/mvm/offloading.c
index 9ec5a5991e3a..9bfb95e89cfb 100644
--- a/drivers/net/wireless/iwlwifi/mvm/offloading.c
+++ b/drivers/net/wireless/iwlwifi/mvm/offloading.c
@@ -81,7 +81,10 @@ void iwl_mvm_set_wowlan_qos_seq(struct iwl_mvm_sta *mvm_ap_sta,
 	}
 }
 
-int iwl_mvm_send_proto_offload(struct iwl_mvm *mvm, struct ieee80211_vif *vif)
+int iwl_mvm_send_proto_offload(struct iwl_mvm *mvm,
+			       struct ieee80211_vif *vif,
+			       bool disable_offloading,
+			       u32 cmd_flags)
 {
 	union {
 		struct iwl_proto_offload_cmd_v1 v1;
@@ -91,7 +94,7 @@ int iwl_mvm_send_proto_offload(struct iwl_mvm *mvm, struct ieee80211_vif *vif)
 	} cmd = {};
 	struct iwl_host_cmd hcmd = {
 		.id = PROT_OFFLOAD_CONFIG_CMD,
-		.flags = CMD_SYNC,
+		.flags = cmd_flags,
 		.data[0] = &cmd,
 		.dataflags[0] = IWL_HCMD_DFL_DUP,
 	};
@@ -204,10 +207,8 @@ int iwl_mvm_send_proto_offload(struct iwl_mvm *mvm, struct ieee80211_vif *vif)
 		memcpy(common->arp_mac_addr, vif->addr, ETH_ALEN);
 	}
 
-	if (!enabled)
-		return 0;
-
-	common->enabled = cpu_to_le32(enabled);
+	if (!disable_offloading)
+		common->enabled = cpu_to_le32(enabled);
 
 	hcmd.len[0] = size;
 	return iwl_mvm_send_cmd(mvm, &hcmd);
diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c
index a3e21f1ee315..10846b648d70 100644
--- a/drivers/net/wireless/iwlwifi/mvm/ops.c
+++ b/drivers/net/wireless/iwlwifi/mvm/ops.c
@@ -905,6 +905,7 @@ static void iwl_mvm_enter_d0i3_iterator(void *_data, u8 *mac,
 		data->disable_offloading = true;
 
 	iwl_mvm_update_d0i3_power_mode(mvm, vif, true, flags);
+	iwl_mvm_send_proto_offload(mvm, vif, data->disable_offloading, flags);
 
 	/*
 	 * on init/association, mvm already configures POWER_TABLE_CMD
-- 
cgit v1.2.2


From c971fa2ae42e73e9ccc2f5e93f268c8742da4c5d Mon Sep 17 00:00:00 2001
From: Oliver Hartkopp <socketcan@hartkopp.net>
Date: Fri, 7 Mar 2014 09:23:41 +0100
Subject: can: Unify MTU settings for CAN interfaces

CAN interfaces only support MTU values of 16 (CAN 2.0) and 72 (CAN FD).
Setting the MTU to other values is pointless but it does not really hurt.
With the introduction of the CAN FD support in drivers/net/can a new
function to switch the MTU for CAN FD has been introduced.

This patch makes use of this can_change_mtu() function to check for correct
MTU settings also in legacy CAN (2.0) devices.

Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/at91_can.c                   | 1 +
 drivers/net/can/bfin_can.c                   | 1 +
 drivers/net/can/c_can/c_can.c                | 1 +
 drivers/net/can/cc770/cc770.c                | 1 +
 drivers/net/can/flexcan.c                    | 1 +
 drivers/net/can/grcan.c                      | 1 +
 drivers/net/can/janz-ican3.c                 | 1 +
 drivers/net/can/mcp251x.c                    | 1 +
 drivers/net/can/mscan/mscan.c                | 7 ++++---
 drivers/net/can/pch_can.c                    | 1 +
 drivers/net/can/sja1000/sja1000.c            | 7 ++++---
 drivers/net/can/slcan.c                      | 6 ++++++
 drivers/net/can/softing/softing_main.c       | 1 +
 drivers/net/can/ti_hecc.c                    | 1 +
 drivers/net/can/usb/ems_usb.c                | 1 +
 drivers/net/can/usb/esd_usb2.c               | 1 +
 drivers/net/can/usb/kvaser_usb.c             | 1 +
 drivers/net/can/usb/peak_usb/pcan_usb_core.c | 1 +
 drivers/net/can/usb/usb_8dev.c               | 1 +
 19 files changed, 30 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c
index 1d00b95f8983..f07fa89b5fd5 100644
--- a/drivers/net/can/at91_can.c
+++ b/drivers/net/can/at91_can.c
@@ -1194,6 +1194,7 @@ static const struct net_device_ops at91_netdev_ops = {
 	.ndo_open	= at91_open,
 	.ndo_stop	= at91_close,
 	.ndo_start_xmit	= at91_start_xmit,
+	.ndo_change_mtu = can_change_mtu,
 };
 
 static ssize_t at91_sysfs_show_mb0_id(struct device *dev,
diff --git a/drivers/net/can/bfin_can.c b/drivers/net/can/bfin_can.c
index 8d2b89a12e09..543ecceb33e9 100644
--- a/drivers/net/can/bfin_can.c
+++ b/drivers/net/can/bfin_can.c
@@ -528,6 +528,7 @@ static const struct net_device_ops bfin_can_netdev_ops = {
 	.ndo_open               = bfin_can_open,
 	.ndo_stop               = bfin_can_close,
 	.ndo_start_xmit         = bfin_can_start_xmit,
+	.ndo_change_mtu         = can_change_mtu,
 };
 
 static int bfin_can_probe(struct platform_device *pdev)
diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
index 951bfede8f3d..9c32e9ef7694 100644
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -1277,6 +1277,7 @@ static const struct net_device_ops c_can_netdev_ops = {
 	.ndo_open = c_can_open,
 	.ndo_stop = c_can_close,
 	.ndo_start_xmit = c_can_start_xmit,
+	.ndo_change_mtu = can_change_mtu,
 };
 
 int register_c_can_dev(struct net_device *dev)
diff --git a/drivers/net/can/cc770/cc770.c b/drivers/net/can/cc770/cc770.c
index 0f12abf6591c..d8379278d648 100644
--- a/drivers/net/can/cc770/cc770.c
+++ b/drivers/net/can/cc770/cc770.c
@@ -823,6 +823,7 @@ static const struct net_device_ops cc770_netdev_ops = {
 	.ndo_open = cc770_open,
 	.ndo_stop = cc770_close,
 	.ndo_start_xmit = cc770_start_xmit,
+	.ndo_change_mtu = can_change_mtu,
 };
 
 int register_cc770dev(struct net_device *dev)
diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index c94d698b73c2..f425ec2c7839 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -1011,6 +1011,7 @@ static const struct net_device_ops flexcan_netdev_ops = {
 	.ndo_open	= flexcan_open,
 	.ndo_stop	= flexcan_close,
 	.ndo_start_xmit	= flexcan_start_xmit,
+	.ndo_change_mtu = can_change_mtu,
 };
 
 static int register_flexcandev(struct net_device *dev)
diff --git a/drivers/net/can/grcan.c b/drivers/net/can/grcan.c
index ab506d6cab37..3fd9fd942c6e 100644
--- a/drivers/net/can/grcan.c
+++ b/drivers/net/can/grcan.c
@@ -1578,6 +1578,7 @@ static const struct net_device_ops grcan_netdev_ops = {
 	.ndo_open	= grcan_open,
 	.ndo_stop	= grcan_close,
 	.ndo_start_xmit	= grcan_start_xmit,
+	.ndo_change_mtu = can_change_mtu,
 };
 
 static int grcan_setup_netdev(struct platform_device *ofdev,
diff --git a/drivers/net/can/janz-ican3.c b/drivers/net/can/janz-ican3.c
index b47df5e482fa..2382c04dc780 100644
--- a/drivers/net/can/janz-ican3.c
+++ b/drivers/net/can/janz-ican3.c
@@ -1594,6 +1594,7 @@ static const struct net_device_ops ican3_netdev_ops = {
 	.ndo_open	= ican3_open,
 	.ndo_stop	= ican3_stop,
 	.ndo_start_xmit	= ican3_xmit,
+	.ndo_change_mtu = can_change_mtu,
 };
 
 /*
diff --git a/drivers/net/can/mcp251x.c b/drivers/net/can/mcp251x.c
index 50aa630c7dd4..a8b74f8da03d 100644
--- a/drivers/net/can/mcp251x.c
+++ b/drivers/net/can/mcp251x.c
@@ -996,6 +996,7 @@ static const struct net_device_ops mcp251x_netdev_ops = {
 	.ndo_open = mcp251x_open,
 	.ndo_stop = mcp251x_stop,
 	.ndo_start_xmit = mcp251x_hard_start_xmit,
+	.ndo_change_mtu = can_change_mtu,
 };
 
 static const struct of_device_id mcp251x_of_match[] = {
diff --git a/drivers/net/can/mscan/mscan.c b/drivers/net/can/mscan/mscan.c
index b9f3faabb0f3..e0c9be5e2ab7 100644
--- a/drivers/net/can/mscan/mscan.c
+++ b/drivers/net/can/mscan/mscan.c
@@ -647,9 +647,10 @@ static int mscan_close(struct net_device *dev)
 }
 
 static const struct net_device_ops mscan_netdev_ops = {
-       .ndo_open               = mscan_open,
-       .ndo_stop               = mscan_close,
-       .ndo_start_xmit         = mscan_start_xmit,
+	.ndo_open	= mscan_open,
+	.ndo_stop	= mscan_close,
+	.ndo_start_xmit	= mscan_start_xmit,
+	.ndo_change_mtu	= can_change_mtu,
 };
 
 int register_mscandev(struct net_device *dev, int mscan_clksrc)
diff --git a/drivers/net/can/pch_can.c b/drivers/net/can/pch_can.c
index 6c077eb87b5e..6472562efedc 100644
--- a/drivers/net/can/pch_can.c
+++ b/drivers/net/can/pch_can.c
@@ -950,6 +950,7 @@ static const struct net_device_ops pch_can_netdev_ops = {
 	.ndo_open		= pch_can_open,
 	.ndo_stop		= pch_close,
 	.ndo_start_xmit		= pch_xmit,
+	.ndo_change_mtu		= can_change_mtu,
 };
 
 static void pch_can_remove(struct pci_dev *pdev)
diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c
index 55cce4737518..f31499a32d7d 100644
--- a/drivers/net/can/sja1000/sja1000.c
+++ b/drivers/net/can/sja1000/sja1000.c
@@ -642,9 +642,10 @@ void free_sja1000dev(struct net_device *dev)
 EXPORT_SYMBOL_GPL(free_sja1000dev);
 
 static const struct net_device_ops sja1000_netdev_ops = {
-       .ndo_open               = sja1000_open,
-       .ndo_stop               = sja1000_close,
-       .ndo_start_xmit         = sja1000_start_xmit,
+	.ndo_open	= sja1000_open,
+	.ndo_stop	= sja1000_close,
+	.ndo_start_xmit	= sja1000_start_xmit,
+	.ndo_change_mtu	= can_change_mtu,
 };
 
 int register_sja1000dev(struct net_device *dev)
diff --git a/drivers/net/can/slcan.c b/drivers/net/can/slcan.c
index 3fcdae266377..f5b16e0e3a12 100644
--- a/drivers/net/can/slcan.c
+++ b/drivers/net/can/slcan.c
@@ -411,10 +411,16 @@ static void slc_free_netdev(struct net_device *dev)
 	slcan_devs[i] = NULL;
 }
 
+static int slcan_change_mtu(struct net_device *dev, int new_mtu)
+{
+	return -EINVAL;
+}
+
 static const struct net_device_ops slc_netdev_ops = {
 	.ndo_open               = slc_open,
 	.ndo_stop               = slc_close,
 	.ndo_start_xmit         = slc_xmit,
+	.ndo_change_mtu         = slcan_change_mtu,
 };
 
 static void slc_setup(struct net_device *dev)
diff --git a/drivers/net/can/softing/softing_main.c b/drivers/net/can/softing/softing_main.c
index 9ea0dcde94ce..3766bd90f3ed 100644
--- a/drivers/net/can/softing/softing_main.c
+++ b/drivers/net/can/softing/softing_main.c
@@ -628,6 +628,7 @@ static const struct net_device_ops softing_netdev_ops = {
 	.ndo_open = softing_netdev_open,
 	.ndo_stop = softing_netdev_stop,
 	.ndo_start_xmit	= softing_netdev_start_xmit,
+	.ndo_change_mtu = can_change_mtu,
 };
 
 static const struct can_bittiming_const softing_btr_const = {
diff --git a/drivers/net/can/ti_hecc.c b/drivers/net/can/ti_hecc.c
index 2c62fe6c8fa9..258b9c4856ec 100644
--- a/drivers/net/can/ti_hecc.c
+++ b/drivers/net/can/ti_hecc.c
@@ -871,6 +871,7 @@ static const struct net_device_ops ti_hecc_netdev_ops = {
 	.ndo_open		= ti_hecc_open,
 	.ndo_stop		= ti_hecc_close,
 	.ndo_start_xmit		= ti_hecc_xmit,
+	.ndo_change_mtu		= can_change_mtu,
 };
 
 static int ti_hecc_probe(struct platform_device *pdev)
diff --git a/drivers/net/can/usb/ems_usb.c b/drivers/net/can/usb/ems_usb.c
index 52c42fd49510..00f2534dde73 100644
--- a/drivers/net/can/usb/ems_usb.c
+++ b/drivers/net/can/usb/ems_usb.c
@@ -883,6 +883,7 @@ static const struct net_device_ops ems_usb_netdev_ops = {
 	.ndo_open = ems_usb_open,
 	.ndo_stop = ems_usb_close,
 	.ndo_start_xmit = ems_usb_start_xmit,
+	.ndo_change_mtu = can_change_mtu,
 };
 
 static const struct can_bittiming_const ems_usb_bittiming_const = {
diff --git a/drivers/net/can/usb/esd_usb2.c b/drivers/net/can/usb/esd_usb2.c
index 7fbe85935f1d..1f8ce91adbd3 100644
--- a/drivers/net/can/usb/esd_usb2.c
+++ b/drivers/net/can/usb/esd_usb2.c
@@ -888,6 +888,7 @@ static const struct net_device_ops esd_usb2_netdev_ops = {
 	.ndo_open = esd_usb2_open,
 	.ndo_stop = esd_usb2_close,
 	.ndo_start_xmit = esd_usb2_start_xmit,
+	.ndo_change_mtu = can_change_mtu,
 };
 
 static const struct can_bittiming_const esd_usb2_bittiming_const = {
diff --git a/drivers/net/can/usb/kvaser_usb.c b/drivers/net/can/usb/kvaser_usb.c
index e77d11049747..ea596b53a5ae 100644
--- a/drivers/net/can/usb/kvaser_usb.c
+++ b/drivers/net/can/usb/kvaser_usb.c
@@ -1388,6 +1388,7 @@ static const struct net_device_ops kvaser_usb_netdev_ops = {
 	.ndo_open = kvaser_usb_open,
 	.ndo_stop = kvaser_usb_close,
 	.ndo_start_xmit = kvaser_usb_start_xmit,
+	.ndo_change_mtu = can_change_mtu,
 };
 
 static const struct can_bittiming_const kvaser_usb_bittiming_const = {
diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_core.c b/drivers/net/can/usb/peak_usb/pcan_usb_core.c
index 0b7a4c3b01a2..93e4a55a6c23 100644
--- a/drivers/net/can/usb/peak_usb/pcan_usb_core.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb_core.c
@@ -702,6 +702,7 @@ static const struct net_device_ops peak_usb_netdev_ops = {
 	.ndo_open = peak_usb_ndo_open,
 	.ndo_stop = peak_usb_ndo_stop,
 	.ndo_start_xmit = peak_usb_ndo_start_xmit,
+	.ndo_change_mtu = can_change_mtu,
 };
 
 /*
diff --git a/drivers/net/can/usb/usb_8dev.c b/drivers/net/can/usb/usb_8dev.c
index a0fa1fd5092b..cde263459932 100644
--- a/drivers/net/can/usb/usb_8dev.c
+++ b/drivers/net/can/usb/usb_8dev.c
@@ -887,6 +887,7 @@ static const struct net_device_ops usb_8dev_netdev_ops = {
 	.ndo_open = usb_8dev_open,
 	.ndo_stop = usb_8dev_close,
 	.ndo_start_xmit = usb_8dev_start_xmit,
+	.ndo_change_mtu = can_change_mtu,
 };
 
 static const struct can_bittiming_const usb_8dev_bittiming_const = {
-- 
cgit v1.2.2


From 3e66d0138c05d9792f458b96581afdb314bc66d6 Mon Sep 17 00:00:00 2001
From: "Christopher R. Baker" <cbaker@rec.ri.cmu.edu>
Date: Sat, 8 Mar 2014 11:00:20 -0500
Subject: can: populate netdev::dev_id for udev discrimination

My objective is to be able to totally discriminate CAN ports on multi-port
cards via udev so as to rename them to semantically interesting/unique names
for my system (e.g., "ecuCAN" and "auxCAN" instead of "can0" and "can1").

The following patch assigns the dev_id field to match the channel number on all
multi-channel devices. I can only test my two-port Peak PCI card, but it works
as expected: ATTRS{dev_id} now expresses the port number and my udev rules now
unambiguously pick out and rename my individual CAN ports.

Signed-off-by: Christopher R. Baker <cbaker@rec.ri.cmu.edu>
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> [PEAK PCAN-USB pro and EMS PCMCIA]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/sja1000/ems_pci.c            | 1 +
 drivers/net/can/sja1000/ems_pcmcia.c         | 1 +
 drivers/net/can/sja1000/kvaser_pci.c         | 1 +
 drivers/net/can/sja1000/peak_pci.c           | 1 +
 drivers/net/can/sja1000/peak_pcmcia.c        | 1 +
 drivers/net/can/sja1000/plx_pci.c            | 1 +
 drivers/net/can/softing/softing_main.c       | 1 +
 drivers/net/can/usb/esd_usb2.c               | 1 +
 drivers/net/can/usb/kvaser_usb.c             | 1 +
 drivers/net/can/usb/peak_usb/pcan_usb_core.c | 1 +
 10 files changed, 10 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/can/sja1000/ems_pci.c b/drivers/net/can/sja1000/ems_pci.c
index d790b874ca79..fd13dbf07d9c 100644
--- a/drivers/net/can/sja1000/ems_pci.c
+++ b/drivers/net/can/sja1000/ems_pci.c
@@ -323,6 +323,7 @@ static int ems_pci_add_card(struct pci_dev *pdev,
 			priv->cdr = EMS_PCI_CDR;
 
 			SET_NETDEV_DEV(dev, &pdev->dev);
+			dev->dev_id = i;
 
 			if (card->version == 1)
 				/* reset int flag of pita */
diff --git a/drivers/net/can/sja1000/ems_pcmcia.c b/drivers/net/can/sja1000/ems_pcmcia.c
index 9e535f2ef52b..381de998d2f1 100644
--- a/drivers/net/can/sja1000/ems_pcmcia.c
+++ b/drivers/net/can/sja1000/ems_pcmcia.c
@@ -211,6 +211,7 @@ static int ems_pcmcia_add_card(struct pcmcia_device *pdev, unsigned long base)
 		priv = netdev_priv(dev);
 		priv->priv = card;
 		SET_NETDEV_DEV(dev, &pdev->dev);
+		dev->dev_id = i;
 
 		priv->irq_flags = IRQF_SHARED;
 		dev->irq = pdev->irq;
diff --git a/drivers/net/can/sja1000/kvaser_pci.c b/drivers/net/can/sja1000/kvaser_pci.c
index c96eb14699d5..23b8e1324e25 100644
--- a/drivers/net/can/sja1000/kvaser_pci.c
+++ b/drivers/net/can/sja1000/kvaser_pci.c
@@ -270,6 +270,7 @@ static int kvaser_pci_add_chan(struct pci_dev *pdev, int channel,
 		 priv->reg_base, board->conf_addr, dev->irq);
 
 	SET_NETDEV_DEV(dev, &pdev->dev);
+	dev->dev_id = channel;
 
 	/* Register SJA1000 device */
 	err = register_sja1000dev(dev);
diff --git a/drivers/net/can/sja1000/peak_pci.c b/drivers/net/can/sja1000/peak_pci.c
index 065ca49eb45e..c540e3d12e3d 100644
--- a/drivers/net/can/sja1000/peak_pci.c
+++ b/drivers/net/can/sja1000/peak_pci.c
@@ -642,6 +642,7 @@ static int peak_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		icr |= chan->icr_mask;
 
 		SET_NETDEV_DEV(dev, &pdev->dev);
+		dev->dev_id = i;
 
 		/* Create chain of SJA1000 devices */
 		chan->prev_dev = pci_get_drvdata(pdev);
diff --git a/drivers/net/can/sja1000/peak_pcmcia.c b/drivers/net/can/sja1000/peak_pcmcia.c
index f7ad754dd2aa..dd56133cc461 100644
--- a/drivers/net/can/sja1000/peak_pcmcia.c
+++ b/drivers/net/can/sja1000/peak_pcmcia.c
@@ -550,6 +550,7 @@ static int pcan_add_channels(struct pcan_pccard *card)
 		priv = netdev_priv(netdev);
 		priv->priv = card;
 		SET_NETDEV_DEV(netdev, &pdev->dev);
+		netdev->dev_id = i;
 
 		priv->irq_flags = IRQF_SHARED;
 		netdev->irq = pdev->irq;
diff --git a/drivers/net/can/sja1000/plx_pci.c b/drivers/net/can/sja1000/plx_pci.c
index fbb61a0d901f..ec39b7cb2287 100644
--- a/drivers/net/can/sja1000/plx_pci.c
+++ b/drivers/net/can/sja1000/plx_pci.c
@@ -587,6 +587,7 @@ static int plx_pci_add_card(struct pci_dev *pdev,
 			priv->cdr = ci->cdr;
 
 			SET_NETDEV_DEV(dev, &pdev->dev);
+			dev->dev_id = i;
 
 			/* Register SJA1000 device */
 			err = register_sja1000dev(dev);
diff --git a/drivers/net/can/softing/softing_main.c b/drivers/net/can/softing/softing_main.c
index 3766bd90f3ed..7d8c8f3672dd 100644
--- a/drivers/net/can/softing/softing_main.c
+++ b/drivers/net/can/softing/softing_main.c
@@ -833,6 +833,7 @@ static int softing_pdev_probe(struct platform_device *pdev)
 			ret = -ENOMEM;
 			goto netdev_failed;
 		}
+		netdev->dev_id = j;
 		priv = netdev_priv(card->net[j]);
 		priv->index = j;
 		ret = softing_netdev_register(netdev);
diff --git a/drivers/net/can/usb/esd_usb2.c b/drivers/net/can/usb/esd_usb2.c
index 1f8ce91adbd3..b7c9e8b11460 100644
--- a/drivers/net/can/usb/esd_usb2.c
+++ b/drivers/net/can/usb/esd_usb2.c
@@ -1025,6 +1025,7 @@ static int esd_usb2_probe_one_net(struct usb_interface *intf, int index)
 	netdev->netdev_ops = &esd_usb2_netdev_ops;
 
 	SET_NETDEV_DEV(netdev, &intf->dev);
+	netdev->dev_id = index;
 
 	err = register_candev(netdev);
 	if (err) {
diff --git a/drivers/net/can/usb/kvaser_usb.c b/drivers/net/can/usb/kvaser_usb.c
index ea596b53a5ae..4ca46edc061d 100644
--- a/drivers/net/can/usb/kvaser_usb.c
+++ b/drivers/net/can/usb/kvaser_usb.c
@@ -1530,6 +1530,7 @@ static int kvaser_usb_init_one(struct usb_interface *intf,
 	netdev->netdev_ops = &kvaser_usb_netdev_ops;
 
 	SET_NETDEV_DEV(netdev, &intf->dev);
+	netdev->dev_id = channel;
 
 	dev->nets[channel] = priv;
 
diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_core.c b/drivers/net/can/usb/peak_usb/pcan_usb_core.c
index 93e4a55a6c23..644e6ab8a489 100644
--- a/drivers/net/can/usb/peak_usb/pcan_usb_core.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb_core.c
@@ -770,6 +770,7 @@ static int peak_usb_create_dev(struct peak_usb_adapter *peak_usb_adapter,
 	usb_set_intfdata(intf, dev);
 
 	SET_NETDEV_DEV(netdev, &intf->dev);
+	netdev->dev_id = ctrl_idx;
 
 	err = register_candev(netdev);
 	if (err) {
-- 
cgit v1.2.2


From 76aeec83e448478838eec868066dda33049d1288 Mon Sep 17 00:00:00 2001
From: Alexander Shiyan <shc_work@mail.ru>
Date: Fri, 14 Mar 2014 12:46:20 +0400
Subject: can: mcp251x: Fix regulators operation without CONFIG_REGULATOR

If CONFIG_REGULATOR is not set, devm_regulator_get() returns NULL,
so use IS_ERR_OR_NULL() macro for checks.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/mcp251x.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/can/mcp251x.c b/drivers/net/can/mcp251x.c
index a8b74f8da03d..28c11f815245 100644
--- a/drivers/net/can/mcp251x.c
+++ b/drivers/net/can/mcp251x.c
@@ -672,7 +672,7 @@ static int mcp251x_hw_probe(struct spi_device *spi)
 
 static int mcp251x_power_enable(struct regulator *reg, int enable)
 {
-	if (IS_ERR(reg))
+	if (IS_ERR_OR_NULL(reg))
 		return 0;
 
 	if (enable)
@@ -1218,7 +1218,7 @@ static int __maybe_unused mcp251x_can_suspend(struct device *dev)
 		priv->after_suspend = AFTER_SUSPEND_DOWN;
 	}
 
-	if (!IS_ERR(priv->power)) {
+	if (!IS_ERR_OR_NULL(priv->power)) {
 		regulator_disable(priv->power);
 		priv->after_suspend |= AFTER_SUSPEND_POWER;
 	}
-- 
cgit v1.2.2


From fd0ab793353862257dee56e07aed79dc195bc1c8 Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@rempel-privat.de>
Date: Sat, 1 Mar 2014 21:15:44 +0100
Subject: ath9k: move struct ath_beacon_config to common

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ath9k.h  | 9 ---------
 drivers/net/wireless/ath/ath9k/common.h | 9 +++++++++
 2 files changed, 9 insertions(+), 9 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index f995c374a9b4..b54bcae61ba1 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -408,15 +408,6 @@ void ath9k_calculate_iter_data(struct ieee80211_hw *hw,
 #define TSF_TO_TU(_h,_l) \
 	((((u32)(_h)) << 22) | (((u32)(_l)) >> 10))
 
-struct ath_beacon_config {
-	int beacon_interval;
-	u16 dtim_period;
-	u16 bmiss_timeout;
-	u8 dtim_count;
-	bool enable_beacon;
-	bool ibss_creator;
-};
-
 struct ath_beacon {
 	enum {
 		OK,		/* no change needed */
diff --git a/drivers/net/wireless/ath/ath9k/common.h b/drivers/net/wireless/ath/ath9k/common.h
index 4c449e35bd65..26aafb394a5c 100644
--- a/drivers/net/wireless/ath/ath9k/common.h
+++ b/drivers/net/wireless/ath/ath9k/common.h
@@ -44,6 +44,15 @@
 #define ATH_EP_RND(x, mul) 						\
 	(((x) + ((mul)/2)) / (mul))
 
+struct ath_beacon_config {
+	int beacon_interval;
+	u16 dtim_period;
+	u16 bmiss_timeout;
+	u8 dtim_count;
+	bool enable_beacon;
+	bool ibss_creator;
+};
+
 bool ath9k_cmn_rx_accept(struct ath_common *common,
 			 struct ieee80211_hdr *hdr,
 			 struct ieee80211_rx_status *rxs,
-- 
cgit v1.2.2


From 3c4816d9a324f06c481dcc36c8dc1168f5d785c5 Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@rempel-privat.de>
Date: Sat, 1 Mar 2014 21:15:45 +0100
Subject: ath9k_htc: use common ath_beacon_config

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/htc.h            | 10 +++----
 drivers/net/wireless/ath/ath9k/htc_drv_beacon.c | 40 ++++++++++++-------------
 drivers/net/wireless/ath/ath9k/htc_drv_init.c   |  2 +-
 3 files changed, 25 insertions(+), 27 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/htc.h b/drivers/net/wireless/ath/ath9k/htc.h
index 3baf9ceae601..ed41db550e18 100644
--- a/drivers/net/wireless/ath/ath9k/htc.h
+++ b/drivers/net/wireless/ath/ath9k/htc.h
@@ -406,12 +406,9 @@ static inline void ath9k_htc_err_stat_rx(struct ath9k_htc_priv *priv,
 #define DEFAULT_SWBA_RESPONSE 40 /* in TUs */
 #define MIN_SWBA_RESPONSE     10 /* in TUs */
 
-struct htc_beacon_config {
+struct htc_beacon {
 	struct ieee80211_vif *bslot[ATH9K_HTC_MAX_BCN_VIF];
-	u16 beacon_interval;
-	u16 dtim_period;
-	u16 bmiss_timeout;
-	u32 bmiss_cnt;
+	u32 bmisscnt;
 };
 
 struct ath_btcoex {
@@ -489,7 +486,8 @@ struct ath9k_htc_priv {
 	struct ath9k_hw_cal_data caldata;
 
 	spinlock_t beacon_lock;
-	struct htc_beacon_config cur_beacon_conf;
+	struct ath_beacon_config cur_beacon_conf;
+	struct htc_beacon beacon;
 
 	struct ath9k_htc_rx rx;
 	struct ath9k_htc_tx tx;
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
index a00ddb9e737e..89290500b2cf 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
@@ -64,7 +64,7 @@ void ath9k_htc_beaconq_config(struct ath9k_htc_priv *priv)
 
 
 static void ath9k_htc_beacon_config_sta(struct ath9k_htc_priv *priv,
-					struct htc_beacon_config *bss_conf)
+					struct ath_beacon_config *bss_conf)
 {
 	struct ath_common *common = ath9k_hw_common(priv->ah);
 	struct ath9k_beacon_state bs;
@@ -162,7 +162,7 @@ static void ath9k_htc_beacon_config_sta(struct ath9k_htc_priv *priv,
 }
 
 static void ath9k_htc_beacon_config_ap(struct ath9k_htc_priv *priv,
-				       struct htc_beacon_config *bss_conf)
+				       struct ath_beacon_config *bss_conf)
 {
 	struct ath_common *common = ath9k_hw_common(priv->ah);
 	enum ath9k_int imask = 0;
@@ -211,13 +211,13 @@ static void ath9k_htc_beacon_config_ap(struct ath9k_htc_priv *priv,
 
 	WMI_CMD(WMI_DISABLE_INTR_CMDID);
 	ath9k_hw_beaconinit(priv->ah, TU_TO_USEC(nexttbtt), TU_TO_USEC(intval));
-	priv->cur_beacon_conf.bmiss_cnt = 0;
+	priv->beacon.bmisscnt = 0;
 	htc_imask = cpu_to_be32(imask);
 	WMI_CMD_BUF(WMI_ENABLE_INTR_CMDID, &htc_imask);
 }
 
 static void ath9k_htc_beacon_config_adhoc(struct ath9k_htc_priv *priv,
-					  struct htc_beacon_config *bss_conf)
+					  struct ath_beacon_config *bss_conf)
 {
 	struct ath_common *common = ath9k_hw_common(priv->ah);
 	enum ath9k_int imask = 0;
@@ -257,7 +257,7 @@ static void ath9k_htc_beacon_config_adhoc(struct ath9k_htc_priv *priv,
 
 	WMI_CMD(WMI_DISABLE_INTR_CMDID);
 	ath9k_hw_beaconinit(priv->ah, TU_TO_USEC(nexttbtt), TU_TO_USEC(intval));
-	priv->cur_beacon_conf.bmiss_cnt = 0;
+	priv->beacon.bmisscnt = 0;
 	htc_imask = cpu_to_be32(imask);
 	WMI_CMD_BUF(WMI_ENABLE_INTR_CMDID, &htc_imask);
 }
@@ -279,7 +279,7 @@ static void ath9k_htc_send_buffered(struct ath9k_htc_priv *priv,
 
 	spin_lock_bh(&priv->beacon_lock);
 
-	vif = priv->cur_beacon_conf.bslot[slot];
+	vif = priv->beacon.bslot[slot];
 
 	skb = ieee80211_get_buffered_bc(priv->hw, vif);
 
@@ -340,7 +340,7 @@ static void ath9k_htc_send_beacon(struct ath9k_htc_priv *priv,
 
 	spin_lock_bh(&priv->beacon_lock);
 
-	vif = priv->cur_beacon_conf.bslot[slot];
+	vif = priv->beacon.bslot[slot];
 	avp = (struct ath9k_htc_vif *)vif->drv_priv;
 
 	if (unlikely(test_bit(OP_SCANNING, &priv->op_flags))) {
@@ -423,8 +423,8 @@ void ath9k_htc_swba(struct ath9k_htc_priv *priv,
 	int slot;
 
 	if (swba->beacon_pending != 0) {
-		priv->cur_beacon_conf.bmiss_cnt++;
-		if (priv->cur_beacon_conf.bmiss_cnt > BSTUCK_THRESHOLD) {
+		priv->beacon.bmisscnt++;
+		if (priv->beacon.bmisscnt > BSTUCK_THRESHOLD) {
 			ath_dbg(common, BSTUCK, "Beacon stuck, HW reset\n");
 			ieee80211_queue_work(priv->hw,
 					     &priv->fatal_work);
@@ -432,16 +432,16 @@ void ath9k_htc_swba(struct ath9k_htc_priv *priv,
 		return;
 	}
 
-	if (priv->cur_beacon_conf.bmiss_cnt) {
+	if (priv->beacon.bmisscnt) {
 		ath_dbg(common, BSTUCK,
 			"Resuming beacon xmit after %u misses\n",
-			priv->cur_beacon_conf.bmiss_cnt);
-		priv->cur_beacon_conf.bmiss_cnt = 0;
+			priv->beacon.bmisscnt);
+		priv->beacon.bmisscnt = 0;
 	}
 
 	slot = ath9k_htc_choose_bslot(priv, swba);
 	spin_lock_bh(&priv->beacon_lock);
-	if (priv->cur_beacon_conf.bslot[slot] == NULL) {
+	if (priv->beacon.bslot[slot] == NULL) {
 		spin_unlock_bh(&priv->beacon_lock);
 		return;
 	}
@@ -460,13 +460,13 @@ void ath9k_htc_assign_bslot(struct ath9k_htc_priv *priv,
 
 	spin_lock_bh(&priv->beacon_lock);
 	for (i = 0; i < ATH9K_HTC_MAX_BCN_VIF; i++) {
-		if (priv->cur_beacon_conf.bslot[i] == NULL) {
+		if (priv->beacon.bslot[i] == NULL) {
 			avp->bslot = i;
 			break;
 		}
 	}
 
-	priv->cur_beacon_conf.bslot[avp->bslot] = vif;
+	priv->beacon.bslot[avp->bslot] = vif;
 	spin_unlock_bh(&priv->beacon_lock);
 
 	ath_dbg(common, CONFIG, "Added interface at beacon slot: %d\n",
@@ -480,7 +480,7 @@ void ath9k_htc_remove_bslot(struct ath9k_htc_priv *priv,
 	struct ath9k_htc_vif *avp = (struct ath9k_htc_vif *)vif->drv_priv;
 
 	spin_lock_bh(&priv->beacon_lock);
-	priv->cur_beacon_conf.bslot[avp->bslot] = NULL;
+	priv->beacon.bslot[avp->bslot] = NULL;
 	spin_unlock_bh(&priv->beacon_lock);
 
 	ath_dbg(common, CONFIG, "Removed interface at beacon slot: %d\n",
@@ -496,7 +496,7 @@ void ath9k_htc_set_tsfadjust(struct ath9k_htc_priv *priv,
 {
 	struct ath_common *common = ath9k_hw_common(priv->ah);
 	struct ath9k_htc_vif *avp = (struct ath9k_htc_vif *)vif->drv_priv;
-	struct htc_beacon_config *cur_conf = &priv->cur_beacon_conf;
+	struct ath_beacon_config *cur_conf = &priv->cur_beacon_conf;
 	u64 tsfadjust;
 
 	if (avp->bslot == 0)
@@ -528,7 +528,7 @@ static bool ath9k_htc_check_beacon_config(struct ath9k_htc_priv *priv,
 					  struct ieee80211_vif *vif)
 {
 	struct ath_common *common = ath9k_hw_common(priv->ah);
-	struct htc_beacon_config *cur_conf = &priv->cur_beacon_conf;
+	struct ath_beacon_config *cur_conf = &priv->cur_beacon_conf;
 	struct ieee80211_bss_conf *bss_conf = &vif->bss_conf;
 	bool beacon_configured;
 
@@ -583,7 +583,7 @@ void ath9k_htc_beacon_config(struct ath9k_htc_priv *priv,
 			     struct ieee80211_vif *vif)
 {
 	struct ath_common *common = ath9k_hw_common(priv->ah);
-	struct htc_beacon_config *cur_conf = &priv->cur_beacon_conf;
+	struct ath_beacon_config *cur_conf = &priv->cur_beacon_conf;
 	struct ieee80211_bss_conf *bss_conf = &vif->bss_conf;
 	struct ath9k_htc_vif *avp = (struct ath9k_htc_vif *) vif->drv_priv;
 
@@ -619,7 +619,7 @@ void ath9k_htc_beacon_config(struct ath9k_htc_priv *priv,
 void ath9k_htc_beacon_reconfig(struct ath9k_htc_priv *priv)
 {
 	struct ath_common *common = ath9k_hw_common(priv->ah);
-	struct htc_beacon_config *cur_conf = &priv->cur_beacon_conf;
+	struct ath_beacon_config *cur_conf = &priv->cur_beacon_conf;
 
 	switch (priv->ah->opmode) {
 	case NL80211_IFTYPE_STATION:
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
index b22fb64403d9..b8a022015f76 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
@@ -520,7 +520,7 @@ static int ath9k_init_priv(struct ath9k_htc_priv *priv,
 		goto err_queues;
 
 	for (i = 0; i < ATH9K_HTC_MAX_BCN_VIF; i++)
-		priv->cur_beacon_conf.bslot[i] = NULL;
+		priv->beacon.bslot[i] = NULL;
 
 	ath9k_cmn_init_channels_rates(common);
 	ath9k_cmn_init_crypto(ah);
-- 
cgit v1.2.2


From a099874ed9db31e8ac0d8173394e54081d518635 Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@rempel-privat.de>
Date: Sat, 1 Mar 2014 21:15:46 +0100
Subject: ath9k_htc: move beaconq to struct htc_beacon

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/htc.h            | 2 +-
 drivers/net/wireless/ath/ath9k/htc_drv_beacon.c | 8 ++++----
 drivers/net/wireless/ath/ath9k/htc_drv_init.c   | 4 ++--
 3 files changed, 7 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/htc.h b/drivers/net/wireless/ath/ath9k/htc.h
index ed41db550e18..69022b08d4d1 100644
--- a/drivers/net/wireless/ath/ath9k/htc.h
+++ b/drivers/net/wireless/ath/ath9k/htc.h
@@ -409,6 +409,7 @@ static inline void ath9k_htc_err_stat_rx(struct ath9k_htc_priv *priv,
 struct htc_beacon {
 	struct ieee80211_vif *bslot[ATH9K_HTC_MAX_BCN_VIF];
 	u32 bmisscnt;
+	u32 beaconq;
 };
 
 struct ath_btcoex {
@@ -512,7 +513,6 @@ struct ath9k_htc_priv {
 	struct work_struct led_work;
 #endif
 
-	int beaconq;
 	int cabq;
 	int hwq_map[IEEE80211_NUM_ACS];
 
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
index 89290500b2cf..09ad141b38b6 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
@@ -26,7 +26,7 @@ void ath9k_htc_beaconq_config(struct ath9k_htc_priv *priv)
 	memset(&qi, 0, sizeof(struct ath9k_tx_queue_info));
 	memset(&qi_be, 0, sizeof(struct ath9k_tx_queue_info));
 
-	ath9k_hw_get_txq_props(ah, priv->beaconq, &qi);
+	ath9k_hw_get_txq_props(ah, priv->beacon.beaconq, &qi);
 
 	if (priv->ah->opmode == NL80211_IFTYPE_AP ||
 	    priv->ah->opmode == NL80211_IFTYPE_MESH_POINT) {
@@ -54,11 +54,11 @@ void ath9k_htc_beaconq_config(struct ath9k_htc_priv *priv)
 
 	}
 
-	if (!ath9k_hw_set_txq_props(ah, priv->beaconq, &qi)) {
+	if (!ath9k_hw_set_txq_props(ah, priv->beacon.beaconq, &qi)) {
 		ath_err(ath9k_hw_common(ah),
-			"Unable to update beacon queue %u!\n", priv->beaconq);
+			"Unable to update beacon queue %u!\n", priv->beacon.beaconq);
 	} else {
-		ath9k_hw_resettxqueue(ah, priv->beaconq);
+		ath9k_hw_resettxqueue(ah, priv->beacon.beaconq);
 	}
 }
 
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
index b8a022015f76..6eb19b8352ba 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
@@ -405,8 +405,8 @@ static int ath9k_init_queues(struct ath9k_htc_priv *priv)
 	for (i = 0; i < ARRAY_SIZE(priv->hwq_map); i++)
 		priv->hwq_map[i] = -1;
 
-	priv->beaconq = ath9k_hw_beaconq_setup(priv->ah);
-	if (priv->beaconq == -1) {
+	priv->beacon.beaconq = ath9k_hw_beaconq_setup(priv->ah);
+	if (priv->beacon.beaconq == -1) {
 		ath_err(common, "Unable to setup BEACON xmit queue\n");
 		goto err;
 	}
-- 
cgit v1.2.2


From 88a4f56ef09d6f38beee79e9abff7cb7f867dc52 Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@rempel-privat.de>
Date: Sat, 1 Mar 2014 21:15:47 +0100
Subject: ath9k_htc: use ath_beacon_conf.enable_beacon

to reduce difference between ath9k and ath9k_htc

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/htc.h            | 1 -
 drivers/net/wireless/ath/ath9k/htc_drv_beacon.c | 4 ++--
 drivers/net/wireless/ath/ath9k/htc_drv_main.c   | 4 ++--
 3 files changed, 4 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/htc.h b/drivers/net/wireless/ath/ath9k/htc.h
index 69022b08d4d1..d5a10882bd74 100644
--- a/drivers/net/wireless/ath/ath9k/htc.h
+++ b/drivers/net/wireless/ath/ath9k/htc.h
@@ -439,7 +439,6 @@ static inline void ath9k_htc_stop_btcoex(struct ath9k_htc_priv *priv)
 
 #define OP_INVALID		   BIT(0)
 #define OP_SCANNING		   BIT(1)
-#define OP_ENABLE_BEACON           BIT(2)
 #define OP_BT_PRIORITY_DETECTED    BIT(3)
 #define OP_BT_SCAN                 BIT(4)
 #define OP_ANI_RUNNING             BIT(5)
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
index 09ad141b38b6..4540eacee093 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
@@ -199,7 +199,7 @@ static void ath9k_htc_beacon_config_ap(struct ath9k_htc_priv *priv,
 		} while (nexttbtt < tsftu);
 	}
 
-	if (test_bit(OP_ENABLE_BEACON, &priv->op_flags))
+	if (bss_conf->enable_beacon)
 		imask |= ATH9K_INT_SWBA;
 
 	ath_dbg(common, CONFIG,
@@ -247,7 +247,7 @@ static void ath9k_htc_beacon_config_adhoc(struct ath9k_htc_priv *priv,
 	else
 		priv->ah->config.sw_beacon_response_time = MIN_SWBA_RESPONSE;
 
-	if (test_bit(OP_ENABLE_BEACON, &priv->op_flags))
+	if (bss_conf->enable_beacon)
 		imask |= ATH9K_INT_SWBA;
 
 	ath_dbg(common, CONFIG,
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
index 90dad4172b0a..40733d03e1a2 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
@@ -1529,7 +1529,7 @@ static void ath9k_htc_bss_info_changed(struct ieee80211_hw *hw,
 		ath_dbg(common, CONFIG, "Beacon enabled for BSS: %pM\n",
 			bss_conf->bssid);
 		ath9k_htc_set_tsfadjust(priv, vif);
-		set_bit(OP_ENABLE_BEACON, &priv->op_flags);
+		priv->cur_beacon_conf.enable_beacon = 1;
 		ath9k_htc_beacon_config(priv, vif);
 	}
 
@@ -1543,7 +1543,7 @@ static void ath9k_htc_bss_info_changed(struct ieee80211_hw *hw,
 			ath_dbg(common, CONFIG,
 				"Beacon disabled for BSS: %pM\n",
 				bss_conf->bssid);
-			clear_bit(OP_ENABLE_BEACON, &priv->op_flags);
+			priv->cur_beacon_conf.enable_beacon = 0;
 			ath9k_htc_beacon_config(priv, vif);
 		}
 	}
-- 
cgit v1.2.2


From eefa01ddd57893c7f4482024029fec323c8e1b89 Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@rempel-privat.de>
Date: Thu, 27 Feb 2014 11:40:46 +0100
Subject: ath9k: move sc_flags to ath_common

we will need it for ath9k_htc, may be other drivers too

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath.h          | 10 ++++++++
 drivers/net/wireless/ath/ath9k/ahb.c    |  7 ++---
 drivers/net/wireless/ath/ath9k/ath9k.h  | 10 --------
 drivers/net/wireless/ath/ath9k/beacon.c | 18 +++++++------
 drivers/net/wireless/ath/ath9k/debug.c  |  2 +-
 drivers/net/wireless/ath/ath9k/link.c   | 16 +++++++-----
 drivers/net/wireless/ath/ath9k/main.c   | 45 ++++++++++++++++++---------------
 drivers/net/wireless/ath/ath9k/mci.c    |  2 +-
 drivers/net/wireless/ath/ath9k/pci.c    |  8 +++---
 drivers/net/wireless/ath/ath9k/tx99.c   |  2 +-
 drivers/net/wireless/ath/ath9k/wow.c    |  4 +--
 drivers/net/wireless/ath/ath9k/xmit.c   |  9 ++++---
 12 files changed, 73 insertions(+), 60 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath.h b/drivers/net/wireless/ath/ath.h
index d239acc26125..a889fd66fc63 100644
--- a/drivers/net/wireless/ath/ath.h
+++ b/drivers/net/wireless/ath/ath.h
@@ -56,6 +56,15 @@ enum ath_device_state {
 	ATH_HW_INITIALIZED,
 };
 
+enum ath_op_flags {
+	ATH_OP_INVALID,
+	ATH_OP_BEACONS,
+	ATH_OP_ANI_RUN,
+	ATH_OP_PRIM_STA_VIF,
+	ATH_OP_HW_RESET,
+	ATH_OP_SCANNING,
+};
+
 enum ath_bus_type {
 	ATH_PCI,
 	ATH_AHB,
@@ -130,6 +139,7 @@ struct ath_common {
 	struct ieee80211_hw *hw;
 	int debug_mask;
 	enum ath_device_state state;
+	unsigned long op_flags;
 
 	struct ath_ani ani;
 
diff --git a/drivers/net/wireless/ath/ath9k/ahb.c b/drivers/net/wireless/ath/ath9k/ahb.c
index 2dff2765769b..a5684c38dcd9 100644
--- a/drivers/net/wireless/ath/ath9k/ahb.c
+++ b/drivers/net/wireless/ath/ath9k/ahb.c
@@ -82,6 +82,7 @@ static int ath_ahb_probe(struct platform_device *pdev)
 	int irq;
 	int ret = 0;
 	struct ath_hw *ah;
+	struct ath_common *common;
 	char hw_name[64];
 
 	if (!dev_get_platdata(&pdev->dev)) {
@@ -124,9 +125,6 @@ static int ath_ahb_probe(struct platform_device *pdev)
 	sc->mem = mem;
 	sc->irq = irq;
 
-	/* Will be cleared in ath9k_start() */
-	set_bit(SC_OP_INVALID, &sc->sc_flags);
-
 	ret = request_irq(irq, ath_isr, IRQF_SHARED, "ath9k", sc);
 	if (ret) {
 		dev_err(&pdev->dev, "request_irq failed\n");
@@ -144,6 +142,9 @@ static int ath_ahb_probe(struct platform_device *pdev)
 	wiphy_info(hw->wiphy, "%s mem=0x%lx, irq=%d\n",
 		   hw_name, (unsigned long)mem, irq);
 
+	common = ath9k_hw_common(sc->sc_ah);
+	/* Will be cleared in ath9k_start() */
+	set_bit(ATH_OP_INVALID, &common->op_flags);
 	return 0;
 
  err_irq:
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index b54bcae61ba1..7f87f338d7c7 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -688,15 +688,6 @@ void ath_ant_comb_scan(struct ath_softc *sc, struct ath_rx_status *rs);
 #define ATH_TXPOWER_MAX         100     /* .5 dBm units */
 #define MAX_GTT_CNT             5
 
-enum sc_op_flags {
-	SC_OP_INVALID,
-	SC_OP_BEACONS,
-	SC_OP_ANI_RUN,
-	SC_OP_PRIM_STA_VIF,
-	SC_OP_HW_RESET,
-	SC_OP_SCANNING,
-};
-
 /* Powersave flags */
 #define PS_WAIT_FOR_BEACON        BIT(0)
 #define PS_WAIT_FOR_CAB           BIT(1)
@@ -726,7 +717,6 @@ struct ath_softc {
 	struct completion paprd_complete;
 	wait_queue_head_t tx_wait;
 
-	unsigned long sc_flags;
 	unsigned long driver_data;
 
 	u8 gtt_cnt;
diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c
index 02eb4f10332b..637267187929 100644
--- a/drivers/net/wireless/ath/ath9k/beacon.c
+++ b/drivers/net/wireless/ath/ath9k/beacon.c
@@ -328,7 +328,7 @@ void ath9k_beacon_tasklet(unsigned long data)
 	bool edma = !!(ah->caps.hw_caps & ATH9K_HW_CAP_EDMA);
 	int slot;
 
-	if (test_bit(SC_OP_HW_RESET, &sc->sc_flags)) {
+	if (test_bit(ATH_OP_HW_RESET, &common->op_flags)) {
 		ath_dbg(common, RESET,
 			"reset work is pending, skip beaconing now\n");
 		return;
@@ -524,7 +524,7 @@ static void ath9k_beacon_config_sta(struct ath_softc *sc,
 	u64 tsf;
 
 	/* No need to configure beacon if we are not associated */
-	if (!test_bit(SC_OP_PRIM_STA_VIF, &sc->sc_flags)) {
+	if (!test_bit(ATH_OP_PRIM_STA_VIF, &common->op_flags)) {
 		ath_dbg(common, BEACON,
 			"STA is not yet associated..skipping beacon config\n");
 		return;
@@ -629,7 +629,7 @@ static void ath9k_beacon_config_adhoc(struct ath_softc *sc,
 	 * joiner case in IBSS mode.
 	 */
 	if (!conf->ibss_creator && conf->enable_beacon)
-		set_bit(SC_OP_BEACONS, &sc->sc_flags);
+		set_bit(ATH_OP_BEACONS, &common->op_flags);
 }
 
 static bool ath9k_allow_beacon_config(struct ath_softc *sc,
@@ -649,7 +649,7 @@ static bool ath9k_allow_beacon_config(struct ath_softc *sc,
 
 	if (sc->sc_ah->opmode == NL80211_IFTYPE_STATION) {
 		if ((vif->type == NL80211_IFTYPE_STATION) &&
-		    test_bit(SC_OP_BEACONS, &sc->sc_flags) &&
+		    test_bit(ATH_OP_BEACONS, &common->op_flags) &&
 		    !avp->primary_sta_vif) {
 			ath_dbg(common, CONFIG,
 				"Beacon already configured for a station interface\n");
@@ -700,6 +700,8 @@ void ath9k_beacon_config(struct ath_softc *sc, struct ieee80211_vif *vif,
 {
 	struct ieee80211_bss_conf *bss_conf = &vif->bss_conf;
 	struct ath_beacon_config *cur_conf = &sc->cur_beacon_conf;
+        struct ath_hw *ah = sc->sc_ah;
+        struct ath_common *common = ath9k_hw_common(ah);
 	unsigned long flags;
 	bool skip_beacon = false;
 
@@ -712,7 +714,7 @@ void ath9k_beacon_config(struct ath_softc *sc, struct ieee80211_vif *vif,
 	if (sc->sc_ah->opmode == NL80211_IFTYPE_STATION) {
 		ath9k_cache_beacon_config(sc, bss_conf);
 		ath9k_set_beacon(sc);
-		set_bit(SC_OP_BEACONS, &sc->sc_flags);
+		set_bit(ATH_OP_BEACONS, &common->op_flags);
 		return;
 	}
 
@@ -751,13 +753,13 @@ void ath9k_beacon_config(struct ath_softc *sc, struct ieee80211_vif *vif,
 		}
 
 		/*
-		 * Do not set the SC_OP_BEACONS flag for IBSS joiner mode
+		 * Do not set the ATH_OP_BEACONS flag for IBSS joiner mode
 		 * here, it is done in ath9k_beacon_config_adhoc().
 		 */
 		if (cur_conf->enable_beacon && !skip_beacon)
-			set_bit(SC_OP_BEACONS, &sc->sc_flags);
+			set_bit(ATH_OP_BEACONS, &common->op_flags);
 		else
-			clear_bit(SC_OP_BEACONS, &sc->sc_flags);
+			clear_bit(ATH_OP_BEACONS, &common->op_flags);
 	}
 }
 
diff --git a/drivers/net/wireless/ath/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c
index 86abb3404dc7..780ff1bee6f6 100644
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
@@ -208,7 +208,7 @@ static ssize_t write_file_ani(struct file *file,
 	common->disable_ani = !ani;
 
 	if (common->disable_ani) {
-		clear_bit(SC_OP_ANI_RUN, &sc->sc_flags);
+		clear_bit(ATH_OP_ANI_RUN, &common->op_flags);
 		ath_stop_ani(sc);
 	} else {
 		ath_check_ani(sc);
diff --git a/drivers/net/wireless/ath/ath9k/link.c b/drivers/net/wireless/ath/ath9k/link.c
index 30dcef5aba10..72a715fe8f24 100644
--- a/drivers/net/wireless/ath/ath9k/link.c
+++ b/drivers/net/wireless/ath/ath9k/link.c
@@ -115,13 +115,14 @@ void ath_hw_pll_work(struct work_struct *work)
 	u32 pll_sqsum;
 	struct ath_softc *sc = container_of(work, struct ath_softc,
 					    hw_pll_work.work);
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	/*
 	 * ensure that the PLL WAR is executed only
 	 * after the STA is associated (or) if the
 	 * beaconing had started in interfaces that
 	 * uses beacons.
 	 */
-	if (!test_bit(SC_OP_BEACONS, &sc->sc_flags))
+	if (!test_bit(ATH_OP_BEACONS, &common->op_flags))
 		return;
 
 	if (sc->tx99_state)
@@ -414,7 +415,7 @@ void ath_start_ani(struct ath_softc *sc)
 	unsigned long timestamp = jiffies_to_msecs(jiffies);
 
 	if (common->disable_ani ||
-	    !test_bit(SC_OP_ANI_RUN, &sc->sc_flags) ||
+	    !test_bit(ATH_OP_ANI_RUN, &common->op_flags) ||
 	    (sc->hw->conf.flags & IEEE80211_CONF_OFFCHANNEL))
 		return;
 
@@ -438,6 +439,7 @@ void ath_stop_ani(struct ath_softc *sc)
 void ath_check_ani(struct ath_softc *sc)
 {
 	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	struct ath_beacon_config *cur_conf = &sc->cur_beacon_conf;
 
 	/*
@@ -453,23 +455,23 @@ void ath_check_ani(struct ath_softc *sc)
 			 * Disable ANI only when there are no
 			 * associated stations.
 			 */
-			if (!test_bit(SC_OP_PRIM_STA_VIF, &sc->sc_flags))
+			if (!test_bit(ATH_OP_PRIM_STA_VIF, &common->op_flags))
 				goto stop_ani;
 		}
 	} else if (ah->opmode == NL80211_IFTYPE_STATION) {
-		if (!test_bit(SC_OP_PRIM_STA_VIF, &sc->sc_flags))
+		if (!test_bit(ATH_OP_PRIM_STA_VIF, &common->op_flags))
 			goto stop_ani;
 	}
 
-	if (!test_bit(SC_OP_ANI_RUN, &sc->sc_flags)) {
-		set_bit(SC_OP_ANI_RUN, &sc->sc_flags);
+	if (!test_bit(ATH_OP_ANI_RUN, &common->op_flags)) {
+		set_bit(ATH_OP_ANI_RUN, &common->op_flags);
 		ath_start_ani(sc);
 	}
 
 	return;
 
 stop_ani:
-	clear_bit(SC_OP_ANI_RUN, &sc->sc_flags);
+	clear_bit(ATH_OP_ANI_RUN, &common->op_flags);
 	ath_stop_ani(sc);
 }
 
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 42a18037004e..d69853b848ce 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -229,16 +229,16 @@ static bool ath_complete_reset(struct ath_softc *sc, bool start)
 	ath9k_cmn_update_txpow(ah, sc->curtxpow,
 			       sc->config.txpowlimit, &sc->curtxpow);
 
-	clear_bit(SC_OP_HW_RESET, &sc->sc_flags);
+	clear_bit(ATH_OP_HW_RESET, &common->op_flags);
 	ath9k_hw_set_interrupts(ah);
 	ath9k_hw_enable_interrupts(ah);
 
 	if (!(sc->hw->conf.flags & IEEE80211_CONF_OFFCHANNEL) && start) {
-		if (!test_bit(SC_OP_BEACONS, &sc->sc_flags))
+		if (!test_bit(ATH_OP_BEACONS, &common->op_flags))
 			goto work;
 
 		if (ah->opmode == NL80211_IFTYPE_STATION &&
-		    test_bit(SC_OP_PRIM_STA_VIF, &sc->sc_flags)) {
+		    test_bit(ATH_OP_PRIM_STA_VIF, &common->op_flags)) {
 			spin_lock_irqsave(&sc->sc_pm_lock, flags);
 			sc->ps_flags |= PS_BEACON_SYNC | PS_WAIT_FOR_BEACON;
 			spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
@@ -336,7 +336,7 @@ static int ath_set_channel(struct ath_softc *sc, struct cfg80211_chan_def *chand
 	int old_pos = -1;
 	int r;
 
-	if (test_bit(SC_OP_INVALID, &sc->sc_flags))
+	if (test_bit(ATH_OP_INVALID, &common->op_flags))
 		return -EIO;
 
 	offchannel = !!(hw->conf.flags & IEEE80211_CONF_OFFCHANNEL);
@@ -402,7 +402,7 @@ static int ath_set_channel(struct ath_softc *sc, struct cfg80211_chan_def *chand
 			chan->center_freq);
 	} else {
 		/* perform spectral scan if requested. */
-		if (test_bit(SC_OP_SCANNING, &sc->sc_flags) &&
+		if (test_bit(ATH_OP_SCANNING, &common->op_flags) &&
 			sc->spectral_mode == SPECTRAL_CHANSCAN)
 			ath9k_spectral_scan_trigger(hw);
 	}
@@ -566,6 +566,7 @@ irqreturn_t ath_isr(int irq, void *dev)
 
 	struct ath_softc *sc = dev;
 	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
 	enum ath9k_int status;
 	u32 sync_cause = 0;
 	bool sched = false;
@@ -575,7 +576,7 @@ irqreturn_t ath_isr(int irq, void *dev)
 	 * touch anything. Note this can happen early
 	 * on if the IRQ is shared.
 	 */
-	if (test_bit(SC_OP_INVALID, &sc->sc_flags))
+	if (test_bit(ATH_OP_INVALID, &common->op_flags))
 		return IRQ_NONE;
 
 	/* shared irq, not for us */
@@ -583,7 +584,7 @@ irqreturn_t ath_isr(int irq, void *dev)
 	if (!ath9k_hw_intrpend(ah))
 		return IRQ_NONE;
 
-	if (test_bit(SC_OP_HW_RESET, &sc->sc_flags)) {
+	if (test_bit(ATH_OP_HW_RESET, &common->op_flags)) {
 		ath9k_hw_kill_interrupts(ah);
 		return IRQ_HANDLED;
 	}
@@ -684,10 +685,11 @@ int ath_reset(struct ath_softc *sc)
 
 void ath9k_queue_reset(struct ath_softc *sc, enum ath_reset_type type)
 {
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 #ifdef CONFIG_ATH9K_DEBUGFS
 	RESET_STAT_INC(sc, type);
 #endif
-	set_bit(SC_OP_HW_RESET, &sc->sc_flags);
+	set_bit(ATH_OP_HW_RESET, &common->op_flags);
 	ieee80211_queue_work(sc->hw, &sc->hw_reset_work);
 }
 
@@ -768,7 +770,7 @@ static int ath9k_start(struct ieee80211_hw *hw)
 
 	ath_mci_enable(sc);
 
-	clear_bit(SC_OP_INVALID, &sc->sc_flags);
+	clear_bit(ATH_OP_INVALID, &common->op_flags);
 	sc->sc_ah->is_monitoring = false;
 
 	if (!ath_complete_reset(sc, false))
@@ -885,7 +887,7 @@ static void ath9k_stop(struct ieee80211_hw *hw)
 
 	ath_cancel_work(sc);
 
-	if (test_bit(SC_OP_INVALID, &sc->sc_flags)) {
+	if (test_bit(ATH_OP_INVALID, &common->op_flags)) {
 		ath_dbg(common, ANY, "Device not present\n");
 		mutex_unlock(&sc->mutex);
 		return;
@@ -940,7 +942,7 @@ static void ath9k_stop(struct ieee80211_hw *hw)
 
 	ath9k_ps_restore(sc);
 
-	set_bit(SC_OP_INVALID, &sc->sc_flags);
+	set_bit(ATH_OP_INVALID, &common->op_flags);
 	sc->ps_idle = prev_idle;
 
 	mutex_unlock(&sc->mutex);
@@ -1081,7 +1083,7 @@ static void ath9k_calculate_summary_state(struct ieee80211_hw *hw,
 	 */
 	if (ah->opmode == NL80211_IFTYPE_STATION &&
 	    old_opmode == NL80211_IFTYPE_AP &&
-	    test_bit(SC_OP_PRIM_STA_VIF, &sc->sc_flags)) {
+	    test_bit(ATH_OP_PRIM_STA_VIF, &common->op_flags)) {
 		ieee80211_iterate_active_interfaces_atomic(
 			sc->hw, IEEE80211_IFACE_ITER_RESUME_ALL,
 			ath9k_sta_vif_iter, sc);
@@ -1590,7 +1592,7 @@ static void ath9k_set_assoc_state(struct ath_softc *sc,
 	struct ieee80211_bss_conf *bss_conf = &vif->bss_conf;
 	unsigned long flags;
 
-	set_bit(SC_OP_PRIM_STA_VIF, &sc->sc_flags);
+	set_bit(ATH_OP_PRIM_STA_VIF, &common->op_flags);
 	avp->primary_sta_vif = true;
 
 	/*
@@ -1625,8 +1627,9 @@ static void ath9k_bss_assoc_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
 {
 	struct ath_softc *sc = data;
 	struct ieee80211_bss_conf *bss_conf = &vif->bss_conf;
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 
-	if (test_bit(SC_OP_PRIM_STA_VIF, &sc->sc_flags))
+	if (test_bit(ATH_OP_PRIM_STA_VIF, &common->op_flags))
 		return;
 
 	if (bss_conf->assoc)
@@ -1657,18 +1660,18 @@ static void ath9k_bss_info_changed(struct ieee80211_hw *hw,
 			bss_conf->bssid, bss_conf->assoc);
 
 		if (avp->primary_sta_vif && !bss_conf->assoc) {
-			clear_bit(SC_OP_PRIM_STA_VIF, &sc->sc_flags);
+			clear_bit(ATH_OP_PRIM_STA_VIF, &common->op_flags);
 			avp->primary_sta_vif = false;
 
 			if (ah->opmode == NL80211_IFTYPE_STATION)
-				clear_bit(SC_OP_BEACONS, &sc->sc_flags);
+				clear_bit(ATH_OP_BEACONS, &common->op_flags);
 		}
 
 		ieee80211_iterate_active_interfaces_atomic(
 			sc->hw, IEEE80211_IFACE_ITER_RESUME_ALL,
 			ath9k_bss_assoc_iter, sc);
 
-		if (!test_bit(SC_OP_PRIM_STA_VIF, &sc->sc_flags) &&
+		if (!test_bit(ATH_OP_PRIM_STA_VIF, &common->op_flags) &&
 		    ah->opmode == NL80211_IFTYPE_STATION) {
 			memset(common->curbssid, 0, ETH_ALEN);
 			common->curaid = 0;
@@ -1897,7 +1900,7 @@ static void ath9k_flush(struct ieee80211_hw *hw, u32 queues, bool drop)
 		return;
 	}
 
-	if (test_bit(SC_OP_INVALID, &sc->sc_flags)) {
+	if (test_bit(ATH_OP_INVALID, &common->op_flags)) {
 		ath_dbg(common, ANY, "Device not present\n");
 		mutex_unlock(&sc->mutex);
 		return;
@@ -2070,13 +2073,15 @@ static int ath9k_get_antenna(struct ieee80211_hw *hw, u32 *tx_ant, u32 *rx_ant)
 static void ath9k_sw_scan_start(struct ieee80211_hw *hw)
 {
 	struct ath_softc *sc = hw->priv;
-	set_bit(SC_OP_SCANNING, &sc->sc_flags);
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+	set_bit(ATH_OP_SCANNING, &common->op_flags);
 }
 
 static void ath9k_sw_scan_complete(struct ieee80211_hw *hw)
 {
 	struct ath_softc *sc = hw->priv;
-	clear_bit(SC_OP_SCANNING, &sc->sc_flags);
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+	clear_bit(ATH_OP_SCANNING, &common->op_flags);
 }
 
 static void ath9k_channel_switch_beacon(struct ieee80211_hw *hw,
diff --git a/drivers/net/wireless/ath/ath9k/mci.c b/drivers/net/wireless/ath/ath9k/mci.c
index 71799fcade54..a0dbcc412384 100644
--- a/drivers/net/wireless/ath/ath9k/mci.c
+++ b/drivers/net/wireless/ath/ath9k/mci.c
@@ -555,7 +555,7 @@ void ath_mci_intr(struct ath_softc *sc)
 		mci_int_rxmsg &= ~AR_MCI_INTERRUPT_RX_MSG_GPM;
 
 		while (more_data == MCI_GPM_MORE) {
-			if (test_bit(SC_OP_HW_RESET, &sc->sc_flags))
+			if (test_bit(ATH_OP_HW_RESET, &common->op_flags))
 				return;
 
 			pgpm = mci->gpm_buf.bf_addr;
diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index 55724b02316b..25304adece57 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -784,6 +784,7 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	struct ath_softc *sc;
 	struct ieee80211_hw *hw;
+	struct ath_common *common;
 	u8 csz;
 	u32 val;
 	int ret = 0;
@@ -858,9 +859,6 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	sc->mem = pcim_iomap_table(pdev)[0];
 	sc->driver_data = id->driver_data;
 
-	/* Will be cleared in ath9k_start() */
-	set_bit(SC_OP_INVALID, &sc->sc_flags);
-
 	ret = request_irq(pdev->irq, ath_isr, IRQF_SHARED, "ath9k", sc);
 	if (ret) {
 		dev_err(&pdev->dev, "request_irq failed\n");
@@ -879,6 +877,10 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	wiphy_info(hw->wiphy, "%s mem=0x%lx, irq=%d\n",
 		   hw_name, (unsigned long)sc->mem, pdev->irq);
 
+	/* Will be cleared in ath9k_start() */
+	common = ath9k_hw_common(sc->sc_ah);
+	set_bit(ATH_OP_INVALID, &common->op_flags);
+
 	return 0;
 
 err_init:
diff --git a/drivers/net/wireless/ath/ath9k/tx99.c b/drivers/net/wireless/ath/ath9k/tx99.c
index b686a7498450..a65cfb91adca 100644
--- a/drivers/net/wireless/ath/ath9k/tx99.c
+++ b/drivers/net/wireless/ath/ath9k/tx99.c
@@ -108,7 +108,7 @@ static int ath9k_tx99_init(struct ath_softc *sc)
 	struct ath_tx_control txctl;
 	int r;
 
-	if (test_bit(SC_OP_INVALID, &sc->sc_flags)) {
+	if (test_bit(ATH_OP_INVALID, &common->op_flags)) {
 		ath_err(common,
 			"driver is in invalid state unable to use TX99");
 		return -EINVAL;
diff --git a/drivers/net/wireless/ath/ath9k/wow.c b/drivers/net/wireless/ath/ath9k/wow.c
index 1b3230fa3651..2879887f5691 100644
--- a/drivers/net/wireless/ath/ath9k/wow.c
+++ b/drivers/net/wireless/ath/ath9k/wow.c
@@ -198,7 +198,7 @@ int ath9k_suspend(struct ieee80211_hw *hw,
 	ath_cancel_work(sc);
 	ath_stop_ani(sc);
 
-	if (test_bit(SC_OP_INVALID, &sc->sc_flags)) {
+	if (test_bit(ATH_OP_INVALID, &common->op_flags)) {
 		ath_dbg(common, ANY, "Device not present\n");
 		ret = -EINVAL;
 		goto fail_wow;
@@ -224,7 +224,7 @@ int ath9k_suspend(struct ieee80211_hw *hw,
 	 * STA.
 	 */
 
-	if (!test_bit(SC_OP_PRIM_STA_VIF, &sc->sc_flags)) {
+	if (!test_bit(ATH_OP_PRIM_STA_VIF, &common->op_flags)) {
 		ath_dbg(common, WOW, "None of the STA vifs are associated\n");
 		ret = 1;
 		goto fail_wow;
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 3e7966b4b61e..f76e6b9bb8e6 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -1769,7 +1769,7 @@ bool ath_drain_all_txq(struct ath_softc *sc)
 	int i;
 	u32 npend = 0;
 
-	if (test_bit(SC_OP_INVALID, &sc->sc_flags))
+	if (test_bit(ATH_OP_INVALID, &common->op_flags))
 		return true;
 
 	ath9k_hw_abort_tx_dma(ah);
@@ -1817,11 +1817,12 @@ void ath_tx_cleanupq(struct ath_softc *sc, struct ath_txq *txq)
  */
 void ath_txq_schedule(struct ath_softc *sc, struct ath_txq *txq)
 {
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	struct ath_atx_ac *ac, *last_ac;
 	struct ath_atx_tid *tid, *last_tid;
 	bool sent = false;
 
-	if (test_bit(SC_OP_HW_RESET, &sc->sc_flags) ||
+	if (test_bit(ATH_OP_HW_RESET, &common->op_flags) ||
 	    list_empty(&txq->axq_acq))
 		return;
 
@@ -2471,7 +2472,7 @@ static void ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq)
 
 	ath_txq_lock(sc, txq);
 	for (;;) {
-		if (test_bit(SC_OP_HW_RESET, &sc->sc_flags))
+		if (test_bit(ATH_OP_HW_RESET, &common->op_flags))
 			break;
 
 		if (list_empty(&txq->axq_q)) {
@@ -2554,7 +2555,7 @@ void ath_tx_edma_tasklet(struct ath_softc *sc)
 	int status;
 
 	for (;;) {
-		if (test_bit(SC_OP_HW_RESET, &sc->sc_flags))
+		if (test_bit(ATH_OP_HW_RESET, &common->op_flags))
 			break;
 
 		status = ath9k_hw_txprocdesc(ah, NULL, (void *)&ts);
-- 
cgit v1.2.2


From 92c3f7ef2c59de5c6b58504d330a59f8e8d78e88 Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@rempel-privat.de>
Date: Sat, 1 Mar 2014 21:15:49 +0100
Subject: ath9k_htc: use common->op_flags

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/htc.h            |  3 ---
 drivers/net/wireless/ath/ath9k/htc_drv_beacon.c |  2 +-
 drivers/net/wireless/ath/ath9k/htc_drv_init.c   |  3 +--
 drivers/net/wireless/ath/ath9k/htc_drv_main.c   | 26 ++++++++++++++-----------
 drivers/net/wireless/ath/ath9k/htc_drv_txrx.c   |  3 ++-
 5 files changed, 19 insertions(+), 18 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/htc.h b/drivers/net/wireless/ath/ath9k/htc.h
index d5a10882bd74..707c5b418dc6 100644
--- a/drivers/net/wireless/ath/ath9k/htc.h
+++ b/drivers/net/wireless/ath/ath9k/htc.h
@@ -437,11 +437,8 @@ static inline void ath9k_htc_stop_btcoex(struct ath9k_htc_priv *priv)
 }
 #endif /* CONFIG_ATH9K_BTCOEX_SUPPORT */
 
-#define OP_INVALID		   BIT(0)
-#define OP_SCANNING		   BIT(1)
 #define OP_BT_PRIORITY_DETECTED    BIT(3)
 #define OP_BT_SCAN                 BIT(4)
-#define OP_ANI_RUNNING             BIT(5)
 #define OP_TSF_RESET               BIT(6)
 
 struct ath9k_htc_priv {
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
index 4540eacee093..9ff9e6e5df06 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
@@ -343,7 +343,7 @@ static void ath9k_htc_send_beacon(struct ath9k_htc_priv *priv,
 	vif = priv->beacon.bslot[slot];
 	avp = (struct ath9k_htc_vif *)vif->drv_priv;
 
-	if (unlikely(test_bit(OP_SCANNING, &priv->op_flags))) {
+	if (unlikely(test_bit(ATH_OP_SCANNING, &common->op_flags))) {
 		spin_unlock_bh(&priv->beacon_lock);
 		return;
 	}
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
index 6eb19b8352ba..4b3b4dd49a42 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
@@ -459,8 +459,6 @@ static int ath9k_init_priv(struct ath9k_htc_priv *priv,
 	struct ath_common *common;
 	int i, ret = 0, csz = 0;
 
-	set_bit(OP_INVALID, &priv->op_flags);
-
 	ah = kzalloc(sizeof(struct ath_hw), GFP_KERNEL);
 	if (!ah)
 		return -ENOMEM;
@@ -485,6 +483,7 @@ static int ath9k_init_priv(struct ath9k_htc_priv *priv,
 	common->priv = priv;
 	common->debug_mask = ath9k_debug;
 	common->btcoex_enabled = ath9k_htc_btcoex_enable == 1;
+	set_bit(ATH_OP_INVALID, &common->op_flags);
 
 	spin_lock_init(&priv->beacon_lock);
 	spin_lock_init(&priv->tx.tx_lock);
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
index 40733d03e1a2..6e17c08422c0 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
@@ -250,7 +250,7 @@ static int ath9k_htc_set_channel(struct ath9k_htc_priv *priv,
 	u8 cmd_rsp;
 	int ret;
 
-	if (test_bit(OP_INVALID, &priv->op_flags))
+	if (test_bit(ATH_OP_INVALID, &common->op_flags))
 		return -EIO;
 
 	fastcc = !!(hw->conf.flags & IEEE80211_CONF_OFFCHANNEL);
@@ -304,7 +304,7 @@ static int ath9k_htc_set_channel(struct ath9k_htc_priv *priv,
 
 	htc_start(priv->htc);
 
-	if (!test_bit(OP_SCANNING, &priv->op_flags) &&
+	if (!test_bit(ATH_OP_SCANNING, &common->op_flags) &&
 	    !(hw->conf.flags & IEEE80211_CONF_OFFCHANNEL))
 		ath9k_htc_vif_reconfig(priv);
 
@@ -748,7 +748,7 @@ void ath9k_htc_start_ani(struct ath9k_htc_priv *priv)
 	common->ani.shortcal_timer = timestamp;
 	common->ani.checkani_timer = timestamp;
 
-	set_bit(OP_ANI_RUNNING, &priv->op_flags);
+	set_bit(ATH_OP_ANI_RUN, &common->op_flags);
 
 	ieee80211_queue_delayed_work(common->hw, &priv->ani_work,
 				     msecs_to_jiffies(ATH_ANI_POLLINTERVAL));
@@ -756,8 +756,9 @@ void ath9k_htc_start_ani(struct ath9k_htc_priv *priv)
 
 void ath9k_htc_stop_ani(struct ath9k_htc_priv *priv)
 {
+	struct ath_common *common = ath9k_hw_common(priv->ah);
 	cancel_delayed_work_sync(&priv->ani_work);
-	clear_bit(OP_ANI_RUNNING, &priv->op_flags);
+	clear_bit(ATH_OP_ANI_RUN, &common->op_flags);
 }
 
 void ath9k_htc_ani_work(struct work_struct *work)
@@ -942,7 +943,7 @@ static int ath9k_htc_start(struct ieee80211_hw *hw)
 		ath_dbg(common, CONFIG,
 			"Failed to update capability in target\n");
 
-	clear_bit(OP_INVALID, &priv->op_flags);
+	clear_bit(ATH_OP_INVALID, &common->op_flags);
 	htc_start(priv->htc);
 
 	spin_lock_bh(&priv->tx.tx_lock);
@@ -971,7 +972,7 @@ static void ath9k_htc_stop(struct ieee80211_hw *hw)
 
 	mutex_lock(&priv->mutex);
 
-	if (test_bit(OP_INVALID, &priv->op_flags)) {
+	if (test_bit(ATH_OP_INVALID, &common->op_flags)) {
 		ath_dbg(common, ANY, "Device not present\n");
 		mutex_unlock(&priv->mutex);
 		return;
@@ -1013,7 +1014,7 @@ static void ath9k_htc_stop(struct ieee80211_hw *hw)
 	ath9k_htc_ps_restore(priv);
 	ath9k_htc_setpower(priv, ATH9K_PM_FULL_SLEEP);
 
-	set_bit(OP_INVALID, &priv->op_flags);
+	set_bit(ATH_OP_INVALID, &common->op_flags);
 
 	ath_dbg(common, CONFIG, "Driver halt\n");
 	mutex_unlock(&priv->mutex);
@@ -1087,7 +1088,7 @@ static int ath9k_htc_add_interface(struct ieee80211_hw *hw,
 	ath9k_htc_set_opmode(priv);
 
 	if ((priv->ah->opmode == NL80211_IFTYPE_AP) &&
-	    !test_bit(OP_ANI_RUNNING, &priv->op_flags)) {
+	    !test_bit(ATH_OP_ANI_RUN, &common->op_flags)) {
 		ath9k_hw_set_tsfadjust(priv->ah, true);
 		ath9k_htc_start_ani(priv);
 	}
@@ -1245,13 +1246,14 @@ static void ath9k_htc_configure_filter(struct ieee80211_hw *hw,
 				       u64 multicast)
 {
 	struct ath9k_htc_priv *priv = hw->priv;
+	struct ath_common *common = ath9k_hw_common(priv->ah);
 	u32 rfilt;
 
 	mutex_lock(&priv->mutex);
 	changed_flags &= SUPPORTED_FILTERS;
 	*total_flags &= SUPPORTED_FILTERS;
 
-	if (test_bit(OP_INVALID, &priv->op_flags)) {
+	if (test_bit(ATH_OP_INVALID, &common->op_flags)) {
 		ath_dbg(ath9k_hw_common(priv->ah), ANY,
 			"Unable to configure filter on invalid state\n");
 		mutex_unlock(&priv->mutex);
@@ -1670,10 +1672,11 @@ static int ath9k_htc_ampdu_action(struct ieee80211_hw *hw,
 static void ath9k_htc_sw_scan_start(struct ieee80211_hw *hw)
 {
 	struct ath9k_htc_priv *priv = hw->priv;
+	struct ath_common *common = ath9k_hw_common(priv->ah);
 
 	mutex_lock(&priv->mutex);
 	spin_lock_bh(&priv->beacon_lock);
-	set_bit(OP_SCANNING, &priv->op_flags);
+	set_bit(ATH_OP_SCANNING, &common->op_flags);
 	spin_unlock_bh(&priv->beacon_lock);
 	cancel_work_sync(&priv->ps_work);
 	ath9k_htc_stop_ani(priv);
@@ -1683,10 +1686,11 @@ static void ath9k_htc_sw_scan_start(struct ieee80211_hw *hw)
 static void ath9k_htc_sw_scan_complete(struct ieee80211_hw *hw)
 {
 	struct ath9k_htc_priv *priv = hw->priv;
+	struct ath_common *common = ath9k_hw_common(priv->ah);
 
 	mutex_lock(&priv->mutex);
 	spin_lock_bh(&priv->beacon_lock);
-	clear_bit(OP_SCANNING, &priv->op_flags);
+	clear_bit(ATH_OP_SCANNING, &common->op_flags);
 	spin_unlock_bh(&priv->beacon_lock);
 	ath9k_htc_ps_wakeup(priv);
 	ath9k_htc_vif_reconfig(priv);
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
index 47b2bfcd8223..e8149e3dbdd5 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
@@ -924,9 +924,10 @@ static void ath9k_htc_opmode_init(struct ath9k_htc_priv *priv)
 
 void ath9k_host_rx_init(struct ath9k_htc_priv *priv)
 {
+	struct ath_common *common = ath9k_hw_common(priv->ah);
 	ath9k_hw_rxena(priv->ah);
 	ath9k_htc_opmode_init(priv);
-	ath9k_hw_startpcureceive(priv->ah, test_bit(OP_SCANNING, &priv->op_flags));
+	ath9k_hw_startpcureceive(priv->ah, test_bit(ATH_OP_SCANNING, &common->op_flags));
 }
 
 static inline void convert_htc_flag(struct ath_rx_status *rx_stats,
-- 
cgit v1.2.2


From c35ccb38d49fb08c6fe84553905a7e2d2b7c4407 Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@rempel-privat.de>
Date: Sat, 1 Mar 2014 21:15:50 +0100
Subject: ath9k_htc: add ATH_OP_PRIM_STA_VIF

we will need it to make common-beacon code work.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/htc_drv_main.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
index 6e17c08422c0..b82a7c43eb6e 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
@@ -1478,6 +1478,7 @@ static void ath9k_htc_bss_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
 		common->curaid = bss_conf->aid;
 		common->last_rssi = ATH_RSSI_DUMMY_MARKER;
 		memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN);
+		set_bit(ATH_OP_PRIM_STA_VIF, &common->op_flags);
 	}
 }
 
@@ -1510,6 +1511,9 @@ static void ath9k_htc_bss_info_changed(struct ieee80211_hw *hw,
 		bss_conf->assoc ?
 			priv->num_sta_assoc_vif++ : priv->num_sta_assoc_vif--;
 
+		if (!bss_conf->assoc)
+			clear_bit(ATH_OP_PRIM_STA_VIF, &common->op_flags);
+
 		if (priv->ah->opmode == NL80211_IFTYPE_STATION) {
 			ath9k_htc_choose_set_bssid(priv);
 			if (bss_conf->assoc && (priv->num_sta_assoc_vif == 1))
-- 
cgit v1.2.2


From ed51fe314f9e9335333d4ab8bd91ad9da17c9925 Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@rempel-privat.de>
Date: Sat, 1 Mar 2014 21:15:51 +0100
Subject: ath9k: remove unused bc_tstamp

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ath9k.h | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 7f87f338d7c7..d8dddce75da7 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -417,7 +417,6 @@ struct ath_beacon {
 
 	u32 beaconq;
 	u32 bmisscnt;
-	u32 bc_tstamp;
 	struct ieee80211_vif *bslot[ATH_BCBUF];
 	int slottime;
 	int slotupdate;
-- 
cgit v1.2.2


From cc24c86f7cc5de8938c32f15cd59bd425d21bb60 Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@rempel-privat.de>
Date: Sat, 1 Mar 2014 21:15:52 +0100
Subject: ath9k_htc: sync beacon slot code with ath9k

we will need it for common-beacon

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/htc.h          |  8 ++++++++
 drivers/net/wireless/ath/ath9k/htc_drv_init.c |  1 +
 drivers/net/wireless/ath/ath9k/htc_drv_main.c | 19 +++++++++++++++----
 3 files changed, 24 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/htc.h b/drivers/net/wireless/ath/ath9k/htc.h
index 707c5b418dc6..124dfedb0fd1 100644
--- a/drivers/net/wireless/ath/ath9k/htc.h
+++ b/drivers/net/wireless/ath/ath9k/htc.h
@@ -407,9 +407,17 @@ static inline void ath9k_htc_err_stat_rx(struct ath9k_htc_priv *priv,
 #define MIN_SWBA_RESPONSE     10 /* in TUs */
 
 struct htc_beacon {
+	enum {
+		OK,		/* no change needed */
+		UPDATE,		/* update pending */
+		COMMIT		/* beacon sent, commit change */
+	} updateslot;		/* slot time update fsm */
+
 	struct ieee80211_vif *bslot[ATH9K_HTC_MAX_BCN_VIF];
 	u32 bmisscnt;
 	u32 beaconq;
+	int slottime;
+	int slotupdate;
 };
 
 struct ath_btcoex {
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
index 4b3b4dd49a42..8a3bd5fe3a54 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
@@ -520,6 +520,7 @@ static int ath9k_init_priv(struct ath9k_htc_priv *priv,
 
 	for (i = 0; i < ATH9K_HTC_MAX_BCN_VIF; i++)
 		priv->beacon.bslot[i] = NULL;
+	priv->beacon.slottime = ATH9K_SLOT_TIME_9;
 
 	ath9k_cmn_init_channels_rates(common);
 	ath9k_cmn_init_crypto(ah);
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
index b82a7c43eb6e..f46cd0250e48 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
@@ -1500,6 +1500,7 @@ static void ath9k_htc_bss_info_changed(struct ieee80211_hw *hw,
 	struct ath9k_htc_priv *priv = hw->priv;
 	struct ath_hw *ah = priv->ah;
 	struct ath_common *common = ath9k_hw_common(ah);
+	int slottime;
 
 	mutex_lock(&priv->mutex);
 	ath9k_htc_ps_wakeup(priv);
@@ -1575,11 +1576,21 @@ static void ath9k_htc_bss_info_changed(struct ieee80211_hw *hw,
 
 	if (changed & BSS_CHANGED_ERP_SLOT) {
 		if (bss_conf->use_short_slot)
-			ah->slottime = 9;
+			slottime = 9;
 		else
-			ah->slottime = 20;
-
-		ath9k_hw_init_global_settings(ah);
+			slottime = 20;
+		if (vif->type == NL80211_IFTYPE_AP) {
+			/*
+			 * Defer update, so that connected stations can adjust
+			 * their settings at the same time.
+			 * See beacon.c for more details
+			 */
+			priv->beacon.slottime = slottime;
+			priv->beacon.updateslot = UPDATE;
+		} else {
+			ah->slottime = slottime;
+			ath9k_hw_init_global_settings(ah);
+		}
 	}
 
 	if (changed & BSS_CHANGED_HT)
-- 
cgit v1.2.2


From df728780d2ae2a47ffb9ce6486f0eb190d3371a6 Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@rempel-privat.de>
Date: Sat, 1 Mar 2014 21:15:53 +0100
Subject: ath9k: remove unused beacon_qi

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ath9k.h | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index d8dddce75da7..aa4f14444997 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -420,7 +420,6 @@ struct ath_beacon {
 	struct ieee80211_vif *bslot[ATH_BCBUF];
 	int slottime;
 	int slotupdate;
-	struct ath9k_tx_queue_info beacon_qi;
 	struct ath_descdma bdma;
 	struct ath_txq *cabq;
 	struct list_head bbuf;
-- 
cgit v1.2.2


From c7303263a0ab2af8f7b6344db7e861c67bd7d29c Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@rempel-privat.de>
Date: Sat, 1 Mar 2014 21:15:54 +0100
Subject: ath9k|ath9k_htc: move IEEE80211_MS_TO_TU to common

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ath9k.h  | 1 -
 drivers/net/wireless/ath/ath9k/common.h | 2 ++
 drivers/net/wireless/ath/ath9k/htc.h    | 1 -
 3 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index aa4f14444997..44d74495c4de 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -403,7 +403,6 @@ void ath9k_calculate_iter_data(struct ieee80211_hw *hw,
 #define	ATH_BCBUF               	8
 #define ATH_DEFAULT_BINTVAL     	100 /* TU */
 #define ATH_DEFAULT_BMISS_LIMIT 	10
-#define IEEE80211_MS_TO_TU(x)           (((x) * 1000) / 1024)
 
 #define TSF_TO_TU(_h,_l) \
 	((((u32)(_h)) << 22) | (((u32)(_l)) >> 10))
diff --git a/drivers/net/wireless/ath/ath9k/common.h b/drivers/net/wireless/ath/ath9k/common.h
index 26aafb394a5c..8deed82f741b 100644
--- a/drivers/net/wireless/ath/ath9k/common.h
+++ b/drivers/net/wireless/ath/ath9k/common.h
@@ -44,6 +44,8 @@
 #define ATH_EP_RND(x, mul) 						\
 	(((x) + ((mul)/2)) / (mul))
 
+#define IEEE80211_MS_TO_TU(x)   (((x) * 1000) / 1024)
+
 struct ath_beacon_config {
 	int beacon_interval;
 	u16 dtim_period;
diff --git a/drivers/net/wireless/ath/ath9k/htc.h b/drivers/net/wireless/ath/ath9k/htc.h
index 124dfedb0fd1..dab1f0cab993 100644
--- a/drivers/net/wireless/ath/ath9k/htc.h
+++ b/drivers/net/wireless/ath/ath9k/htc.h
@@ -39,7 +39,6 @@
 #define ATH_RESTART_CALINTERVAL   1200000 /* 20 minutes */
 
 #define ATH_DEFAULT_BMISS_LIMIT 10
-#define IEEE80211_MS_TO_TU(x)   (((x) * 1000) / 1024)
 #define TSF_TO_TU(_h, _l) \
 	((((u32)(_h)) << 22) | (((u32)(_l)) >> 10))
 
-- 
cgit v1.2.2


From a2030b9dbce8db1261a0a7985217361a992a8949 Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@rempel-privat.de>
Date: Sat, 1 Mar 2014 21:15:55 +0100
Subject: ath9k-common: add nexttbtt and intval to ath_beacon_config

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/common.h | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/common.h b/drivers/net/wireless/ath/ath9k/common.h
index 8deed82f741b..eccc718e2b20 100644
--- a/drivers/net/wireless/ath/ath9k/common.h
+++ b/drivers/net/wireless/ath/ath9k/common.h
@@ -53,6 +53,8 @@ struct ath_beacon_config {
 	u8 dtim_count;
 	bool enable_beacon;
 	bool ibss_creator;
+	u32 nexttbtt;
+	u32 intval;
 };
 
 bool ath9k_cmn_rx_accept(struct ath_common *common,
-- 
cgit v1.2.2


From cbbdf2ae2d67b333d7a4db5ce8b7391b3de1256d Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@rempel-privat.de>
Date: Sat, 1 Mar 2014 21:15:56 +0100
Subject: ath9k: move ath9k_beacon_config_sta to common-beacon

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/Makefile        |   3 +-
 drivers/net/wireless/ath/ath9k/beacon.c        |  80 +---------------
 drivers/net/wireless/ath/ath9k/common-beacon.c | 126 +++++++++++++++++++++++++
 drivers/net/wireless/ath/ath9k/common-beacon.h |  21 +++++
 drivers/net/wireless/ath/ath9k/common.h        |   1 +
 5 files changed, 153 insertions(+), 78 deletions(-)
 create mode 100644 drivers/net/wireless/ath/ath9k/common-beacon.c
 create mode 100644 drivers/net/wireless/ath/ath9k/common-beacon.h

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/Makefile b/drivers/net/wireless/ath/ath9k/Makefile
index b58fe99ef745..8e1c7b0fe76c 100644
--- a/drivers/net/wireless/ath/ath9k/Makefile
+++ b/drivers/net/wireless/ath/ath9k/Makefile
@@ -52,7 +52,8 @@ obj-$(CONFIG_ATH9K_HW) += ath9k_hw.o
 
 obj-$(CONFIG_ATH9K_COMMON) += ath9k_common.o
 ath9k_common-y:=	common.o \
-			common-init.o
+			common-init.o \
+			common-beacon.o
 
 ath9k_htc-y +=	htc_hst.o \
 		hif_usb.o \
diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c
index 637267187929..9333fa1c031f 100644
--- a/drivers/net/wireless/ath/ath9k/beacon.c
+++ b/drivers/net/wireless/ath/ath9k/beacon.c
@@ -505,87 +505,13 @@ static void ath9k_beacon_config_ap(struct ath_softc *sc,
 	ath9k_beacon_init(sc, nexttbtt, intval, false);
 }
 
-/*
- * This sets up the beacon timers according to the timestamp of the last
- * received beacon and the current TSF, configures PCF and DTIM
- * handling, programs the sleep registers so the hardware will wakeup in
- * time to receive beacons, and configures the beacon miss handling so
- * we'll receive a BMISS interrupt when we stop seeing beacons from the AP
- * we've associated with.
- */
-static void ath9k_beacon_config_sta(struct ath_softc *sc,
+static void ath9k_beacon_config_sta(struct ath_hw *ah,
 				    struct ath_beacon_config *conf)
 {
-	struct ath_hw *ah = sc->sc_ah;
-	struct ath_common *common = ath9k_hw_common(ah);
 	struct ath9k_beacon_state bs;
-	int dtim_intval;
-	u32 nexttbtt = 0, intval;
-	u64 tsf;
 
-	/* No need to configure beacon if we are not associated */
-	if (!test_bit(ATH_OP_PRIM_STA_VIF, &common->op_flags)) {
-		ath_dbg(common, BEACON,
-			"STA is not yet associated..skipping beacon config\n");
+	if (ath9k_cmn_beacon_config_sta(ah, conf, &bs) == -EPERM)
 		return;
-	}
-
-	memset(&bs, 0, sizeof(bs));
-	intval = conf->beacon_interval;
-
-	/*
-	 * Setup dtim parameters according to
-	 * last beacon we received (which may be none).
-	 */
-	dtim_intval = intval * conf->dtim_period;
-
-	/*
-	 * Pull nexttbtt forward to reflect the current
-	 * TSF and calculate dtim state for the result.
-	 */
-	tsf = ath9k_hw_gettsf64(ah);
-	nexttbtt = ath9k_get_next_tbtt(sc, tsf, intval);
-
-	bs.bs_intval = TU_TO_USEC(intval);
-	bs.bs_dtimperiod = conf->dtim_period * bs.bs_intval;
-	bs.bs_nexttbtt = nexttbtt;
-	bs.bs_nextdtim = nexttbtt;
-	if (conf->dtim_period > 1)
-		bs.bs_nextdtim = ath9k_get_next_tbtt(sc, tsf, dtim_intval);
-
-	/*
-	 * Calculate the number of consecutive beacons to miss* before taking
-	 * a BMISS interrupt. The configuration is specified in TU so we only
-	 * need calculate based	on the beacon interval.  Note that we clamp the
-	 * result to at most 15 beacons.
-	 */
-	bs.bs_bmissthreshold = DIV_ROUND_UP(conf->bmiss_timeout, intval);
-	if (bs.bs_bmissthreshold > 15)
-		bs.bs_bmissthreshold = 15;
-	else if (bs.bs_bmissthreshold <= 0)
-		bs.bs_bmissthreshold = 1;
-
-	/*
-	 * Calculate sleep duration. The configuration is given in ms.
-	 * We ensure a multiple of the beacon period is used. Also, if the sleep
-	 * duration is greater than the DTIM period then it makes senses
-	 * to make it a multiple of that.
-	 *
-	 * XXX fixed at 100ms
-	 */
-
-	bs.bs_sleepduration = TU_TO_USEC(roundup(IEEE80211_MS_TO_TU(100),
-						 intval));
-	if (bs.bs_sleepduration > bs.bs_dtimperiod)
-		bs.bs_sleepduration = bs.bs_dtimperiod;
-
-	/* TSF out of range threshold fixed at 1 second */
-	bs.bs_tsfoor_threshold = ATH9K_TSFOOR_THRESHOLD;
-
-	ath_dbg(common, BEACON, "bmiss: %u sleep: %u\n",
-		bs.bs_bmissthreshold, bs.bs_sleepduration);
-
-	/* Set the computed STA beacon timers */
 
 	ath9k_hw_disable_interrupts(ah);
 	ath9k_hw_set_sta_beacon_timers(ah, &bs);
@@ -777,7 +703,7 @@ void ath9k_set_beacon(struct ath_softc *sc)
 		ath9k_beacon_config_adhoc(sc, cur_conf);
 		break;
 	case NL80211_IFTYPE_STATION:
-		ath9k_beacon_config_sta(sc, cur_conf);
+		ath9k_beacon_config_sta(sc->sc_ah, cur_conf);
 		break;
 	default:
 		ath_dbg(common, CONFIG, "Unsupported beaconing mode\n");
diff --git a/drivers/net/wireless/ath/ath9k/common-beacon.c b/drivers/net/wireless/ath/ath9k/common-beacon.c
new file mode 100644
index 000000000000..35cc9fddfb35
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/common-beacon.c
@@ -0,0 +1,126 @@
+/*
+ * Copyright (c) 2008-2011 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "common.h"
+
+#define FUDGE 2
+
+/* Calculate the modulo of a 64 bit TSF snapshot with a TU divisor */
+static u32 ath9k_mod_tsf64_tu(u64 tsf, u32 div_tu)
+{
+	u32 tsf_mod, tsf_hi, tsf_lo, mod_hi, mod_lo;
+
+	tsf_mod = tsf & (BIT(10) - 1);
+	tsf_hi = tsf >> 32;
+	tsf_lo = ((u32) tsf) >> 10;
+
+	mod_hi = tsf_hi % div_tu;
+	mod_lo = ((mod_hi << 22) + tsf_lo) % div_tu;
+
+	return (mod_lo << 10) | tsf_mod;
+}
+
+static u32 ath9k_get_next_tbtt(struct ath_hw *ah, u64 tsf,
+			       unsigned int interval)
+{
+	unsigned int offset;
+
+	tsf += TU_TO_USEC(FUDGE + ah->config.sw_beacon_response_time);
+	offset = ath9k_mod_tsf64_tu(tsf, interval);
+
+	return (u32) tsf + TU_TO_USEC(interval) - offset;
+}
+
+/*
+ * This sets up the beacon timers according to the timestamp of the last
+ * received beacon and the current TSF, configures PCF and DTIM
+ * handling, programs the sleep registers so the hardware will wakeup in
+ * time to receive beacons, and configures the beacon miss handling so
+ * we'll receive a BMISS interrupt when we stop seeing beacons from the AP
+ * we've associated with.
+ */
+int ath9k_cmn_beacon_config_sta(struct ath_hw *ah,
+				 struct ath_beacon_config *conf,
+				 struct ath9k_beacon_state *bs)
+{
+	struct ath_common *common = ath9k_hw_common(ah);
+	int dtim_intval;
+	u64 tsf;
+
+	/* No need to configure beacon if we are not associated */
+	if (!test_bit(ATH_OP_PRIM_STA_VIF, &common->op_flags)) {
+		ath_dbg(common, BEACON,
+			"STA is not yet associated..skipping beacon config\n");
+		return -EPERM;
+	}
+
+	memset(bs, 0, sizeof(*bs));
+	conf->intval = conf->beacon_interval;
+
+	/*
+	 * Setup dtim parameters according to
+	 * last beacon we received (which may be none).
+	 */
+	dtim_intval = conf->intval * conf->dtim_period;
+
+	/*
+	 * Pull nexttbtt forward to reflect the current
+	 * TSF and calculate dtim state for the result.
+	 */
+	tsf = ath9k_hw_gettsf64(ah);
+	conf->nexttbtt = ath9k_get_next_tbtt(ah, tsf, conf->intval);
+
+	bs->bs_intval = TU_TO_USEC(conf->intval);
+	bs->bs_dtimperiod = conf->dtim_period * bs->bs_intval;
+	bs->bs_nexttbtt = conf->nexttbtt;
+	bs->bs_nextdtim = conf->nexttbtt;
+	if (conf->dtim_period > 1)
+		bs->bs_nextdtim = ath9k_get_next_tbtt(ah, tsf, dtim_intval);
+
+	/*
+	 * Calculate the number of consecutive beacons to miss* before taking
+	 * a BMISS interrupt. The configuration is specified in TU so we only
+	 * need calculate based	on the beacon interval.  Note that we clamp the
+	 * result to at most 15 beacons.
+	 */
+	bs->bs_bmissthreshold = DIV_ROUND_UP(conf->bmiss_timeout, conf->intval);
+	if (bs->bs_bmissthreshold > 15)
+		bs->bs_bmissthreshold = 15;
+	else if (bs->bs_bmissthreshold <= 0)
+		bs->bs_bmissthreshold = 1;
+
+	/*
+	 * Calculate sleep duration. The configuration is given in ms.
+	 * We ensure a multiple of the beacon period is used. Also, if the sleep
+	 * duration is greater than the DTIM period then it makes senses
+	 * to make it a multiple of that.
+	 *
+	 * XXX fixed at 100ms
+	 */
+
+	bs->bs_sleepduration = TU_TO_USEC(roundup(IEEE80211_MS_TO_TU(100),
+						 conf->intval));
+	if (bs->bs_sleepduration > bs->bs_dtimperiod)
+		bs->bs_sleepduration = bs->bs_dtimperiod;
+
+	/* TSF out of range threshold fixed at 1 second */
+	bs->bs_tsfoor_threshold = ATH9K_TSFOOR_THRESHOLD;
+
+	ath_dbg(common, BEACON, "bmiss: %u sleep: %u\n",
+		bs->bs_bmissthreshold, bs->bs_sleepduration);
+	return 0;
+}
+EXPORT_SYMBOL(ath9k_cmn_beacon_config_sta);
diff --git a/drivers/net/wireless/ath/ath9k/common-beacon.h b/drivers/net/wireless/ath/ath9k/common-beacon.h
new file mode 100644
index 000000000000..51cbcb5c4b9f
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/common-beacon.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright (c) 2009-2011 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+struct ath_beacon_config;
+
+int ath9k_cmn_beacon_config_sta(struct ath_hw *ah,
+				struct ath_beacon_config *conf,
+				struct ath9k_beacon_state *bs);
diff --git a/drivers/net/wireless/ath/ath9k/common.h b/drivers/net/wireless/ath/ath9k/common.h
index eccc718e2b20..ca38116838f0 100644
--- a/drivers/net/wireless/ath/ath9k/common.h
+++ b/drivers/net/wireless/ath/ath9k/common.h
@@ -22,6 +22,7 @@
 #include "hw-ops.h"
 
 #include "common-init.h"
+#include "common-beacon.h"
 
 /* Common header for Atheros 802.11n base driver cores */
 
-- 
cgit v1.2.2


From f84224402bddea8e2762869f4eaebc3b46be2aa0 Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@rempel-privat.de>
Date: Sat, 1 Mar 2014 21:15:57 +0100
Subject: ath9k_htc: use ath9k_cmn_beacon_config_sta

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/htc_drv_beacon.c | 84 +------------------------
 1 file changed, 2 insertions(+), 82 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
index 9ff9e6e5df06..fc16c10549b1 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
@@ -62,97 +62,17 @@ void ath9k_htc_beaconq_config(struct ath9k_htc_priv *priv)
 	}
 }
 
-
 static void ath9k_htc_beacon_config_sta(struct ath9k_htc_priv *priv,
 					struct ath_beacon_config *bss_conf)
 {
-	struct ath_common *common = ath9k_hw_common(priv->ah);
 	struct ath9k_beacon_state bs;
 	enum ath9k_int imask = 0;
-	int dtimperiod, dtimcount;
-	int bmiss_timeout;
-	u32 nexttbtt = 0, intval, tsftu;
 	__be32 htc_imask = 0;
-	u64 tsf;
-	int num_beacons, offset, dtim_dec_count;
 	int ret __attribute__ ((unused));
 	u8 cmd_rsp;
 
-	memset(&bs, 0, sizeof(bs));
-
-	intval = bss_conf->beacon_interval;
-	bmiss_timeout = (ATH_DEFAULT_BMISS_LIMIT * bss_conf->beacon_interval);
-
-	/*
-	 * Setup dtim parameters according to
-	 * last beacon we received (which may be none).
-	 */
-	dtimperiod = bss_conf->dtim_period;
-	if (dtimperiod <= 0)		/* NB: 0 if not known */
-		dtimperiod = 1;
-	dtimcount = 1;
-	if (dtimcount >= dtimperiod)	/* NB: sanity check */
-		dtimcount = 0;
-
-	/*
-	 * Pull nexttbtt forward to reflect the current
-	 * TSF and calculate dtim state for the result.
-	 */
-	tsf = ath9k_hw_gettsf64(priv->ah);
-	tsftu = TSF_TO_TU(tsf>>32, tsf) + FUDGE;
-
-	num_beacons = tsftu / intval + 1;
-	offset = tsftu % intval;
-	nexttbtt = tsftu - offset;
-	if (offset)
-		nexttbtt += intval;
-
-	/* DTIM Beacon every dtimperiod Beacon */
-	dtim_dec_count = num_beacons % dtimperiod;
-	dtimcount -= dtim_dec_count;
-	if (dtimcount < 0)
-		dtimcount += dtimperiod;
-
-	bs.bs_intval = TU_TO_USEC(intval);
-	bs.bs_nexttbtt = TU_TO_USEC(nexttbtt);
-	bs.bs_dtimperiod = dtimperiod * bs.bs_intval;
-	bs.bs_nextdtim = bs.bs_nexttbtt + dtimcount * bs.bs_intval;
-
-	/*
-	 * Calculate the number of consecutive beacons to miss* before taking
-	 * a BMISS interrupt. The configuration is specified in TU so we only
-	 * need calculate based	on the beacon interval.  Note that we clamp the
-	 * result to at most 15 beacons.
-	 */
-	bs.bs_bmissthreshold = DIV_ROUND_UP(bmiss_timeout, intval);
-	if (bs.bs_bmissthreshold > 15)
-		bs.bs_bmissthreshold = 15;
-	else if (bs.bs_bmissthreshold <= 0)
-		bs.bs_bmissthreshold = 1;
-
-	/*
-	 * Calculate sleep duration. The configuration is given in ms.
-	 * We ensure a multiple of the beacon period is used. Also, if the sleep
-	 * duration is greater than the DTIM period then it makes senses
-	 * to make it a multiple of that.
-	 *
-	 * XXX fixed at 100ms
-	 */
-
-	bs.bs_sleepduration = TU_TO_USEC(roundup(IEEE80211_MS_TO_TU(100),
-						 intval));
-	if (bs.bs_sleepduration > bs.bs_dtimperiod)
-		bs.bs_sleepduration = bs.bs_dtimperiod;
-
-	/* TSF out of range threshold fixed at 1 second */
-	bs.bs_tsfoor_threshold = ATH9K_TSFOOR_THRESHOLD;
-
-	ath_dbg(common, CONFIG, "intval: %u tsf: %llu tsftu: %u\n",
-		intval, tsf, tsftu);
-	ath_dbg(common, CONFIG, "bmiss: %u sleep: %u\n",
-		bs.bs_bmissthreshold, bs.bs_sleepduration);
-
-	/* Set the computed STA beacon timers */
+	if (ath9k_cmn_beacon_config_sta(priv->ah, bss_conf, &bs) == -EPERM)
+		return;
 
 	WMI_CMD(WMI_DISABLE_INTR_CMDID);
 	ath9k_hw_set_sta_beacon_timers(priv->ah, &bs);
-- 
cgit v1.2.2


From 4c9a1f32600b9181558737dede31403c1ca05291 Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@rempel-privat.de>
Date: Sat, 1 Mar 2014 21:15:58 +0100
Subject: ath9k: move ath9k_beacon_config_adhoc to common

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/beacon.c        | 21 ++-------------------
 drivers/net/wireless/ath/ath9k/common-beacon.c | 25 +++++++++++++++++++++++++
 drivers/net/wireless/ath/ath9k/common-beacon.h |  2 ++
 3 files changed, 29 insertions(+), 19 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c
index 9333fa1c031f..01322a41e0fc 100644
--- a/drivers/net/wireless/ath/ath9k/beacon.c
+++ b/drivers/net/wireless/ath/ath9k/beacon.c
@@ -526,29 +526,12 @@ static void ath9k_beacon_config_adhoc(struct ath_softc *sc,
 {
 	struct ath_hw *ah = sc->sc_ah;
 	struct ath_common *common = ath9k_hw_common(ah);
-	u32 intval, nexttbtt;
 
 	ath9k_reset_beacon_status(sc);
 
-	intval = TU_TO_USEC(conf->beacon_interval);
-
-	if (conf->ibss_creator)
-		nexttbtt = intval;
-	else
-		nexttbtt = ath9k_get_next_tbtt(sc, ath9k_hw_gettsf64(ah),
-					       conf->beacon_interval);
-
-	if (conf->enable_beacon)
-		ah->imask |= ATH9K_INT_SWBA;
-	else
-		ah->imask &= ~ATH9K_INT_SWBA;
-
-	ath_dbg(common, BEACON,
-		"IBSS (%s) nexttbtt: %u intval: %u conf_intval: %u\n",
-		(conf->enable_beacon) ? "Enable" : "Disable",
-		nexttbtt, intval, conf->beacon_interval);
+	ath9k_cmn_beacon_config_adhoc(ah, conf);
 
-	ath9k_beacon_init(sc, nexttbtt, intval, conf->ibss_creator);
+	ath9k_beacon_init(sc, conf->nexttbtt, conf->intval, conf->ibss_creator);
 
 	/*
 	 * Set the global 'beacon has been configured' flag for the
diff --git a/drivers/net/wireless/ath/ath9k/common-beacon.c b/drivers/net/wireless/ath/ath9k/common-beacon.c
index 35cc9fddfb35..45bc899cbeb0 100644
--- a/drivers/net/wireless/ath/ath9k/common-beacon.c
+++ b/drivers/net/wireless/ath/ath9k/common-beacon.c
@@ -124,3 +124,28 @@ int ath9k_cmn_beacon_config_sta(struct ath_hw *ah,
 	return 0;
 }
 EXPORT_SYMBOL(ath9k_cmn_beacon_config_sta);
+
+void ath9k_cmn_beacon_config_adhoc(struct ath_hw *ah,
+				   struct ath_beacon_config *conf)
+{
+	struct ath_common *common = ath9k_hw_common(ah);
+
+	conf->intval = TU_TO_USEC(conf->beacon_interval);
+
+	if (conf->ibss_creator)
+		conf->nexttbtt = conf->intval;
+	else
+		conf->nexttbtt = ath9k_get_next_tbtt(ah, ath9k_hw_gettsf64(ah),
+					       conf->beacon_interval);
+
+	if (conf->enable_beacon)
+		ah->imask |= ATH9K_INT_SWBA;
+	else
+		ah->imask &= ~ATH9K_INT_SWBA;
+
+	ath_dbg(common, BEACON,
+		"IBSS (%s) nexttbtt: %u intval: %u conf_intval: %u\n",
+		(conf->enable_beacon) ? "Enable" : "Disable",
+		conf->nexttbtt, conf->intval, conf->beacon_interval);
+}
+EXPORT_SYMBOL(ath9k_cmn_beacon_config_adhoc);
diff --git a/drivers/net/wireless/ath/ath9k/common-beacon.h b/drivers/net/wireless/ath/ath9k/common-beacon.h
index 51cbcb5c4b9f..d8e7c0db08a9 100644
--- a/drivers/net/wireless/ath/ath9k/common-beacon.h
+++ b/drivers/net/wireless/ath/ath9k/common-beacon.h
@@ -19,3 +19,5 @@ struct ath_beacon_config;
 int ath9k_cmn_beacon_config_sta(struct ath_hw *ah,
 				struct ath_beacon_config *conf,
 				struct ath9k_beacon_state *bs);
+void ath9k_cmn_beacon_config_adhoc(struct ath_hw *ah,
+				   struct ath_beacon_config *conf);
-- 
cgit v1.2.2


From 7f5c4c8320f853e17ec1c6dbb78d3753ba76a6cd Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@rempel-privat.de>
Date: Sat, 1 Mar 2014 21:15:59 +0100
Subject: ath9k_htc: add ath9k_htc_beacon_init (but not use it)

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/htc_drv_beacon.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
index fc16c10549b1..b9b03c1b4010 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
@@ -62,6 +62,28 @@ void ath9k_htc_beaconq_config(struct ath9k_htc_priv *priv)
 	}
 }
 
+/*
+ * Both nexttbtt and intval have to be in usecs.
+ */
+static void ath9k_htc_beacon_init(struct ath9k_htc_priv *priv,
+				  struct ath_beacon_config *conf,
+				  bool reset_tsf)
+{
+	struct ath_hw *ah = priv->ah;
+	int ret __attribute__ ((unused));
+	__be32 htc_imask = 0;
+	u8 cmd_rsp;
+
+	WMI_CMD(WMI_DISABLE_INTR_CMDID);
+	if (reset_tsf)
+		ath9k_hw_reset_tsf(ah);
+	ath9k_htc_beaconq_config(priv);
+	ath9k_hw_beaconinit(ah, conf->nexttbtt, conf->intval);
+	priv->beacon.bmisscnt = 0;
+	htc_imask = cpu_to_be32(ah->imask);
+	WMI_CMD_BUF(WMI_ENABLE_INTR_CMDID, &htc_imask);
+}
+
 static void ath9k_htc_beacon_config_sta(struct ath9k_htc_priv *priv,
 					struct ath_beacon_config *bss_conf)
 {
-- 
cgit v1.2.2


From 4a4495a5fdf3f5d2e98446c94146dcaefb06a69b Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@rempel-privat.de>
Date: Sat, 1 Mar 2014 21:16:00 +0100
Subject: ath9k_htc: use ath9k_htc_beacon_init in ath9k_htc_beacon_config_ap

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/htc_drv_beacon.c | 31 +++++++++----------------
 1 file changed, 11 insertions(+), 20 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
index b9b03c1b4010..b23231fea02c 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
@@ -107,22 +107,19 @@ static void ath9k_htc_beacon_config_ap(struct ath9k_htc_priv *priv,
 				       struct ath_beacon_config *bss_conf)
 {
 	struct ath_common *common = ath9k_hw_common(priv->ah);
-	enum ath9k_int imask = 0;
-	u32 nexttbtt, intval, tsftu;
-	__be32 htc_imask = 0;
+	u32 tsftu;
 	int ret __attribute__ ((unused));
-	u8 cmd_rsp;
 	u64 tsf;
 
-	intval = bss_conf->beacon_interval;
-	intval /= ATH9K_HTC_MAX_BCN_VIF;
-	nexttbtt = intval;
+	bss_conf->intval = bss_conf->beacon_interval;
+	bss_conf->intval /= ATH9K_HTC_MAX_BCN_VIF;
+	bss_conf->nexttbtt = bss_conf->intval;
 
 	/*
 	 * To reduce beacon misses under heavy TX load,
 	 * set the beacon response time to a larger value.
 	 */
-	if (intval > DEFAULT_SWBA_RESPONSE)
+	if (bss_conf->intval > DEFAULT_SWBA_RESPONSE)
 		priv->ah->config.sw_beacon_response_time = DEFAULT_SWBA_RESPONSE;
 	else
 		priv->ah->config.sw_beacon_response_time = MIN_SWBA_RESPONSE;
@@ -137,25 +134,19 @@ static void ath9k_htc_beacon_config_ap(struct ath9k_htc_priv *priv,
 		tsf = ath9k_hw_gettsf64(priv->ah);
 		tsftu = TSF_TO_TU(tsf >> 32, tsf) + FUDGE;
 		do {
-			nexttbtt += intval;
-		} while (nexttbtt < tsftu);
+			bss_conf->nexttbtt += bss_conf->intval;
+		} while (bss_conf->nexttbtt < tsftu);
 	}
 
 	if (bss_conf->enable_beacon)
-		imask |= ATH9K_INT_SWBA;
+		priv->ah->imask = ATH9K_INT_SWBA;
 
 	ath_dbg(common, CONFIG,
 		"AP Beacon config, intval: %d, nexttbtt: %u, resp_time: %d imask: 0x%x\n",
-		bss_conf->beacon_interval, nexttbtt,
-		priv->ah->config.sw_beacon_response_time, imask);
+		bss_conf->beacon_interval, bss_conf->nexttbtt,
+		priv->ah->config.sw_beacon_response_time, priv->ah->imask);
 
-	ath9k_htc_beaconq_config(priv);
-
-	WMI_CMD(WMI_DISABLE_INTR_CMDID);
-	ath9k_hw_beaconinit(priv->ah, TU_TO_USEC(nexttbtt), TU_TO_USEC(intval));
-	priv->beacon.bmisscnt = 0;
-	htc_imask = cpu_to_be32(imask);
-	WMI_CMD_BUF(WMI_ENABLE_INTR_CMDID, &htc_imask);
+	ath9k_htc_beacon_init(priv, bss_conf, false);
 }
 
 static void ath9k_htc_beacon_config_adhoc(struct ath9k_htc_priv *priv,
-- 
cgit v1.2.2


From f7197924d5187201e1a6e1617ad7a8c81f333330 Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@rempel-privat.de>
Date: Sat, 1 Mar 2014 21:16:01 +0100
Subject: ath9k_htc: use ath9k_htc_beacon_init in ath9k_htc_beacon_config_adhoc

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/htc_drv_beacon.c | 31 ++++++++++---------------
 1 file changed, 12 insertions(+), 19 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
index b23231fea02c..81237155a1e0 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
@@ -152,16 +152,13 @@ static void ath9k_htc_beacon_config_ap(struct ath9k_htc_priv *priv,
 static void ath9k_htc_beacon_config_adhoc(struct ath9k_htc_priv *priv,
 					  struct ath_beacon_config *bss_conf)
 {
-	struct ath_common *common = ath9k_hw_common(priv->ah);
-	enum ath9k_int imask = 0;
-	u32 nexttbtt, intval, tsftu;
-	__be32 htc_imask = 0;
-	int ret __attribute__ ((unused));
-	u8 cmd_rsp;
+	struct ath_hw *ah = priv->ah;
+	struct ath_common *common = ath9k_hw_common(ah);
+	u32 tsftu;
 	u64 tsf;
 
-	intval = bss_conf->beacon_interval;
-	nexttbtt = intval;
+	bss_conf->intval = bss_conf->beacon_interval;
+	bss_conf->nexttbtt = bss_conf->intval;
 
 	/*
 	 * Pull nexttbtt forward to reflect the current TSF.
@@ -169,30 +166,26 @@ static void ath9k_htc_beacon_config_adhoc(struct ath9k_htc_priv *priv,
 	tsf = ath9k_hw_gettsf64(priv->ah);
 	tsftu = TSF_TO_TU(tsf >> 32, tsf) + FUDGE;
 	do {
-		nexttbtt += intval;
-	} while (nexttbtt < tsftu);
+		bss_conf->nexttbtt += bss_conf->intval;
+	} while (bss_conf->nexttbtt < tsftu);
 
 	/*
 	 * Only one IBSS interfce is allowed.
 	 */
-	if (intval > DEFAULT_SWBA_RESPONSE)
+	if (bss_conf->intval > DEFAULT_SWBA_RESPONSE)
 		priv->ah->config.sw_beacon_response_time = DEFAULT_SWBA_RESPONSE;
 	else
 		priv->ah->config.sw_beacon_response_time = MIN_SWBA_RESPONSE;
 
 	if (bss_conf->enable_beacon)
-		imask |= ATH9K_INT_SWBA;
+		ah->imask = ATH9K_INT_SWBA;
 
 	ath_dbg(common, CONFIG,
 		"IBSS Beacon config, intval: %d, nexttbtt: %u, resp_time: %d, imask: 0x%x\n",
-		bss_conf->beacon_interval, nexttbtt,
-		priv->ah->config.sw_beacon_response_time, imask);
+		bss_conf->beacon_interval, bss_conf->nexttbtt,
+		priv->ah->config.sw_beacon_response_time, ah->imask);
 
-	WMI_CMD(WMI_DISABLE_INTR_CMDID);
-	ath9k_hw_beaconinit(priv->ah, TU_TO_USEC(nexttbtt), TU_TO_USEC(intval));
-	priv->beacon.bmisscnt = 0;
-	htc_imask = cpu_to_be32(imask);
-	WMI_CMD_BUF(WMI_ENABLE_INTR_CMDID, &htc_imask);
+	ath9k_htc_beacon_init(priv, bss_conf, bss_conf->ibss_creator);
 }
 
 void ath9k_htc_beaconep(void *drv_priv, struct sk_buff *skb,
-- 
cgit v1.2.2


From 12f53c308ecbe2b76798a5091f8452eeed0a732b Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@rempel-privat.de>
Date: Sat, 1 Mar 2014 21:16:02 +0100
Subject: ath9k_htc: use ath9k_cmn_beacon_config_adhoc

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/htc_drv_beacon.c | 35 +++++--------------------
 1 file changed, 7 insertions(+), 28 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
index 81237155a1e0..50937d014542 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
@@ -150,42 +150,21 @@ static void ath9k_htc_beacon_config_ap(struct ath9k_htc_priv *priv,
 }
 
 static void ath9k_htc_beacon_config_adhoc(struct ath9k_htc_priv *priv,
-					  struct ath_beacon_config *bss_conf)
+					  struct ath_beacon_config *conf)
 {
 	struct ath_hw *ah = priv->ah;
-	struct ath_common *common = ath9k_hw_common(ah);
-	u32 tsftu;
-	u64 tsf;
-
-	bss_conf->intval = bss_conf->beacon_interval;
-	bss_conf->nexttbtt = bss_conf->intval;
-
-	/*
-	 * Pull nexttbtt forward to reflect the current TSF.
-	 */
-	tsf = ath9k_hw_gettsf64(priv->ah);
-	tsftu = TSF_TO_TU(tsf >> 32, tsf) + FUDGE;
-	do {
-		bss_conf->nexttbtt += bss_conf->intval;
-	} while (bss_conf->nexttbtt < tsftu);
+	ah->imask = 0;
 
+	ath9k_cmn_beacon_config_adhoc(ah, conf);
 	/*
 	 * Only one IBSS interfce is allowed.
 	 */
-	if (bss_conf->intval > DEFAULT_SWBA_RESPONSE)
-		priv->ah->config.sw_beacon_response_time = DEFAULT_SWBA_RESPONSE;
+	if (conf->intval >= TU_TO_USEC(DEFAULT_SWBA_RESPONSE))
+		ah->config.sw_beacon_response_time = DEFAULT_SWBA_RESPONSE;
 	else
-		priv->ah->config.sw_beacon_response_time = MIN_SWBA_RESPONSE;
-
-	if (bss_conf->enable_beacon)
-		ah->imask = ATH9K_INT_SWBA;
-
-	ath_dbg(common, CONFIG,
-		"IBSS Beacon config, intval: %d, nexttbtt: %u, resp_time: %d, imask: 0x%x\n",
-		bss_conf->beacon_interval, bss_conf->nexttbtt,
-		priv->ah->config.sw_beacon_response_time, ah->imask);
+		ah->config.sw_beacon_response_time = MIN_SWBA_RESPONSE;
 
-	ath9k_htc_beacon_init(priv, bss_conf, bss_conf->ibss_creator);
+	ath9k_htc_beacon_init(priv, conf, conf->ibss_creator);
 }
 
 void ath9k_htc_beaconep(void *drv_priv, struct sk_buff *skb,
-- 
cgit v1.2.2


From fa7b52fadbbbec855fb13ccc508128f6d234e08d Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@rempel-privat.de>
Date: Sat, 1 Mar 2014 21:16:03 +0100
Subject: ath9k: move ath9k_beacon_config_ap common

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/beacon.c        | 21 ++-----------------
 drivers/net/wireless/ath/ath9k/common-beacon.c | 29 ++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath9k/common-beacon.h |  3 +++
 3 files changed, 34 insertions(+), 19 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c
index 01322a41e0fc..e1887438f8c5 100644
--- a/drivers/net/wireless/ath/ath9k/beacon.c
+++ b/drivers/net/wireless/ath/ath9k/beacon.c
@@ -483,26 +483,9 @@ static void ath9k_beacon_config_ap(struct ath_softc *sc,
 				   struct ath_beacon_config *conf)
 {
 	struct ath_hw *ah = sc->sc_ah;
-	struct ath_common *common = ath9k_hw_common(ah);
-	u32 nexttbtt, intval;
-
-	/* NB: the beacon interval is kept internally in TU's */
-	intval = TU_TO_USEC(conf->beacon_interval);
-	intval /= ATH_BCBUF;
-	nexttbtt = ath9k_get_next_tbtt(sc, ath9k_hw_gettsf64(ah),
-				       conf->beacon_interval);
-
-	if (conf->enable_beacon)
-		ah->imask |= ATH9K_INT_SWBA;
-	else
-		ah->imask &= ~ATH9K_INT_SWBA;
-
-	ath_dbg(common, BEACON,
-		"AP (%s) nexttbtt: %u intval: %u conf_intval: %u\n",
-		(conf->enable_beacon) ? "Enable" : "Disable",
-		nexttbtt, intval, conf->beacon_interval);
 
-	ath9k_beacon_init(sc, nexttbtt, intval, false);
+	ath9k_cmn_beacon_config_ap(ah, conf, ATH_BCBUF);
+	ath9k_beacon_init(sc, conf->nexttbtt, conf->intval, false);
 }
 
 static void ath9k_beacon_config_sta(struct ath_hw *ah,
diff --git a/drivers/net/wireless/ath/ath9k/common-beacon.c b/drivers/net/wireless/ath/ath9k/common-beacon.c
index 45bc899cbeb0..775d1d20ce0b 100644
--- a/drivers/net/wireless/ath/ath9k/common-beacon.c
+++ b/drivers/net/wireless/ath/ath9k/common-beacon.c
@@ -149,3 +149,32 @@ void ath9k_cmn_beacon_config_adhoc(struct ath_hw *ah,
 		conf->nexttbtt, conf->intval, conf->beacon_interval);
 }
 EXPORT_SYMBOL(ath9k_cmn_beacon_config_adhoc);
+
+/*
+ * For multi-bss ap support beacons are either staggered evenly over N slots or
+ * burst together.  For the former arrange for the SWBA to be delivered for each
+ * slot. Slots that are not occupied will generate nothing.
+ */
+void ath9k_cmn_beacon_config_ap(struct ath_hw *ah,
+				struct ath_beacon_config *conf,
+				unsigned int bc_buf)
+{
+	struct ath_common *common = ath9k_hw_common(ah);
+
+	/* NB: the beacon interval is kept internally in TU's */
+	conf->intval = TU_TO_USEC(conf->beacon_interval);
+	conf->intval /= bc_buf;
+	conf->nexttbtt = ath9k_get_next_tbtt(ah, ath9k_hw_gettsf64(ah),
+				       conf->beacon_interval);
+
+	if (conf->enable_beacon)
+		ah->imask |= ATH9K_INT_SWBA;
+	else
+		ah->imask &= ~ATH9K_INT_SWBA;
+
+	ath_dbg(common, BEACON,
+		"AP (%s) nexttbtt: %u intval: %u conf_intval: %u\n",
+		(conf->enable_beacon) ? "Enable" : "Disable",
+		conf->nexttbtt, conf->intval, conf->beacon_interval);
+}
+EXPORT_SYMBOL(ath9k_cmn_beacon_config_ap);
diff --git a/drivers/net/wireless/ath/ath9k/common-beacon.h b/drivers/net/wireless/ath/ath9k/common-beacon.h
index d8e7c0db08a9..3665d27f0dc7 100644
--- a/drivers/net/wireless/ath/ath9k/common-beacon.h
+++ b/drivers/net/wireless/ath/ath9k/common-beacon.h
@@ -21,3 +21,6 @@ int ath9k_cmn_beacon_config_sta(struct ath_hw *ah,
 				struct ath9k_beacon_state *bs);
 void ath9k_cmn_beacon_config_adhoc(struct ath_hw *ah,
 				   struct ath_beacon_config *conf);
+void ath9k_cmn_beacon_config_ap(struct ath_hw *ah,
+				struct ath_beacon_config *conf,
+				unsigned int bc_buf);
-- 
cgit v1.2.2


From 6a77dd33fcfbfcf48f77fed599a0ce763e65a894 Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@rempel-privat.de>
Date: Sat, 1 Mar 2014 21:16:04 +0100
Subject: ath9k: remove unused ath9k_get_next_tbtt

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/beacon.c | 27 ---------------------------
 1 file changed, 27 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c
index e1887438f8c5..471e0f624e81 100644
--- a/drivers/net/wireless/ath/ath9k/beacon.c
+++ b/drivers/net/wireless/ath/ath9k/beacon.c
@@ -447,33 +447,6 @@ static void ath9k_beacon_init(struct ath_softc *sc, u32 nexttbtt,
 	ath9k_hw_enable_interrupts(ah);
 }
 
-/* Calculate the modulo of a 64 bit TSF snapshot with a TU divisor */
-static u32 ath9k_mod_tsf64_tu(u64 tsf, u32 div_tu)
-{
-	u32 tsf_mod, tsf_hi, tsf_lo, mod_hi, mod_lo;
-
-	tsf_mod = tsf & (BIT(10) - 1);
-	tsf_hi = tsf >> 32;
-	tsf_lo = ((u32) tsf) >> 10;
-
-	mod_hi = tsf_hi % div_tu;
-	mod_lo = ((mod_hi << 22) + tsf_lo) % div_tu;
-
-	return (mod_lo << 10) | tsf_mod;
-}
-
-static u32 ath9k_get_next_tbtt(struct ath_softc *sc, u64 tsf,
-			       unsigned int interval)
-{
-	struct ath_hw *ah = sc->sc_ah;
-	unsigned int offset;
-
-	tsf += TU_TO_USEC(FUDGE + ah->config.sw_beacon_response_time);
-	offset = ath9k_mod_tsf64_tu(tsf, interval);
-
-	return (u32) tsf + TU_TO_USEC(interval) - offset;
-}
-
 /*
  * For multi-bss ap support beacons are either staggered evenly over N slots or
  * burst together.  For the former arrange for the SWBA to be delivered for each
-- 
cgit v1.2.2


From 4b2d841f5bc3143f5a019b6a441c19bf2986bdf4 Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@rempel-privat.de>
Date: Sat, 1 Mar 2014 21:16:05 +0100
Subject: ath9k_htc: use ath9k_cmn_beacon_config_ap

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/htc_drv_beacon.c | 43 +++++--------------------
 1 file changed, 8 insertions(+), 35 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
index 50937d014542..cbaf4e0429f0 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
@@ -104,49 +104,22 @@ static void ath9k_htc_beacon_config_sta(struct ath9k_htc_priv *priv,
 }
 
 static void ath9k_htc_beacon_config_ap(struct ath9k_htc_priv *priv,
-				       struct ath_beacon_config *bss_conf)
+				       struct ath_beacon_config *conf)
 {
-	struct ath_common *common = ath9k_hw_common(priv->ah);
-	u32 tsftu;
-	int ret __attribute__ ((unused));
-	u64 tsf;
-
-	bss_conf->intval = bss_conf->beacon_interval;
-	bss_conf->intval /= ATH9K_HTC_MAX_BCN_VIF;
-	bss_conf->nexttbtt = bss_conf->intval;
+	struct ath_hw *ah = priv->ah;
+	ah->imask = 0;
 
+	ath9k_cmn_beacon_config_ap(ah, conf, ATH9K_HTC_MAX_BCN_VIF);
 	/*
 	 * To reduce beacon misses under heavy TX load,
 	 * set the beacon response time to a larger value.
 	 */
-	if (bss_conf->intval > DEFAULT_SWBA_RESPONSE)
-		priv->ah->config.sw_beacon_response_time = DEFAULT_SWBA_RESPONSE;
+	if (conf->intval >= TU_TO_USEC(DEFAULT_SWBA_RESPONSE))
+		ah->config.sw_beacon_response_time = DEFAULT_SWBA_RESPONSE;
 	else
-		priv->ah->config.sw_beacon_response_time = MIN_SWBA_RESPONSE;
-
-	if (test_bit(OP_TSF_RESET, &priv->op_flags)) {
-		ath9k_hw_reset_tsf(priv->ah);
-		clear_bit(OP_TSF_RESET, &priv->op_flags);
-	} else {
-		/*
-		 * Pull nexttbtt forward to reflect the current TSF.
-		 */
-		tsf = ath9k_hw_gettsf64(priv->ah);
-		tsftu = TSF_TO_TU(tsf >> 32, tsf) + FUDGE;
-		do {
-			bss_conf->nexttbtt += bss_conf->intval;
-		} while (bss_conf->nexttbtt < tsftu);
-	}
-
-	if (bss_conf->enable_beacon)
-		priv->ah->imask = ATH9K_INT_SWBA;
-
-	ath_dbg(common, CONFIG,
-		"AP Beacon config, intval: %d, nexttbtt: %u, resp_time: %d imask: 0x%x\n",
-		bss_conf->beacon_interval, bss_conf->nexttbtt,
-		priv->ah->config.sw_beacon_response_time, priv->ah->imask);
+		ah->config.sw_beacon_response_time = MIN_SWBA_RESPONSE;
 
-	ath9k_htc_beacon_init(priv, bss_conf, false);
+	ath9k_htc_beacon_init(priv, conf, false);
 }
 
 static void ath9k_htc_beacon_config_adhoc(struct ath9k_htc_priv *priv,
-- 
cgit v1.2.2


From 5f667642f4b290b04d88d5ca926fba81fed6180d Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@rempel-privat.de>
Date: Sat, 1 Mar 2014 21:16:06 +0100
Subject: ath9k_htc: move DEFAULT_SWBA_RESPONSE check to ath9k_htc_beacon_init

... to remove some more dups.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/htc_drv_beacon.c | 22 +++++-----------------
 1 file changed, 5 insertions(+), 17 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
index cbaf4e0429f0..e8b6ec3c1dbb 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
@@ -74,6 +74,11 @@ static void ath9k_htc_beacon_init(struct ath9k_htc_priv *priv,
 	__be32 htc_imask = 0;
 	u8 cmd_rsp;
 
+	if (conf->intval >= TU_TO_USEC(DEFAULT_SWBA_RESPONSE))
+		ah->config.sw_beacon_response_time = DEFAULT_SWBA_RESPONSE;
+	else
+		ah->config.sw_beacon_response_time = MIN_SWBA_RESPONSE;
+
 	WMI_CMD(WMI_DISABLE_INTR_CMDID);
 	if (reset_tsf)
 		ath9k_hw_reset_tsf(ah);
@@ -110,15 +115,6 @@ static void ath9k_htc_beacon_config_ap(struct ath9k_htc_priv *priv,
 	ah->imask = 0;
 
 	ath9k_cmn_beacon_config_ap(ah, conf, ATH9K_HTC_MAX_BCN_VIF);
-	/*
-	 * To reduce beacon misses under heavy TX load,
-	 * set the beacon response time to a larger value.
-	 */
-	if (conf->intval >= TU_TO_USEC(DEFAULT_SWBA_RESPONSE))
-		ah->config.sw_beacon_response_time = DEFAULT_SWBA_RESPONSE;
-	else
-		ah->config.sw_beacon_response_time = MIN_SWBA_RESPONSE;
-
 	ath9k_htc_beacon_init(priv, conf, false);
 }
 
@@ -129,14 +125,6 @@ static void ath9k_htc_beacon_config_adhoc(struct ath9k_htc_priv *priv,
 	ah->imask = 0;
 
 	ath9k_cmn_beacon_config_adhoc(ah, conf);
-	/*
-	 * Only one IBSS interfce is allowed.
-	 */
-	if (conf->intval >= TU_TO_USEC(DEFAULT_SWBA_RESPONSE))
-		ah->config.sw_beacon_response_time = DEFAULT_SWBA_RESPONSE;
-	else
-		ah->config.sw_beacon_response_time = MIN_SWBA_RESPONSE;
-
 	ath9k_htc_beacon_init(priv, conf, conf->ibss_creator);
 }
 
-- 
cgit v1.2.2


From a797ca1eadeef7f4fdba2ab5d143d56cc3ec5da3 Mon Sep 17 00:00:00 2001
From: Franky Lin <frankyl@broadcom.com>
Date: Sat, 15 Mar 2014 17:18:17 +0100
Subject: brcmfmac: add BCM4354 SDIO interface support

BCM4354 is an a/b/g/n/ac 2x2 WiFi chip. This patch adds support for it through
SDIO interface.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c     | 1 +
 drivers/net/wireless/brcm80211/brcmfmac/chip.c       | 5 +++++
 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c   | 7 ++++++-
 drivers/net/wireless/brcm80211/include/brcm_hw_ids.h | 1 +
 4 files changed, 13 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
index d737cf78469a..6e8718bf6920 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
@@ -988,6 +988,7 @@ static const struct sdio_device_id brcmf_sdmmc_ids[] = {
 	{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_43362)},
 	{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM,
 		     SDIO_DEVICE_ID_BROADCOM_4335_4339)},
+	{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4354)},
 	{ /* end: all zeroes */ },
 };
 MODULE_DEVICE_TABLE(sdio, brcmf_sdmmc_ids);
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/chip.c b/drivers/net/wireless/brcm80211/brcmfmac/chip.c
index a07b95ef9e70..df130ef53d1c 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/chip.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.c
@@ -504,6 +504,7 @@ static void brcmf_chip_get_raminfo(struct brcmf_chip_priv *ci)
 		ci->pub.ramsize = 0x3c000;
 		break;
 	case BCM4339_CHIP_ID:
+	case BCM4354_CHIP_ID:
 		ci->pub.ramsize = 0xc0000;
 		ci->pub.rambase = 0x180000;
 		break;
@@ -1006,6 +1007,10 @@ bool brcmf_chip_sr_capable(struct brcmf_chip *pub)
 	chip = container_of(pub, struct brcmf_chip_priv, pub);
 
 	switch (pub->chip) {
+	case BCM4354_CHIP_ID:
+		/* explicitly check SR engine enable bit */
+		pmu_cc3_mask = BIT(2);
+		/* fall-through */
 	case BCM43241_CHIP_ID:
 	case BCM4335_CHIP_ID:
 	case BCM4339_CHIP_ID:
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index a111b6fbbeba..4aa8678590d5 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -578,6 +578,8 @@ static const struct sdiod_drive_str sdiod_drvstr_tab2_3v3[] = {
 #define BCM43362_NVRAM_NAME		"brcm/brcmfmac43362-sdio.txt"
 #define BCM4339_FIRMWARE_NAME		"brcm/brcmfmac4339-sdio.bin"
 #define BCM4339_NVRAM_NAME		"brcm/brcmfmac4339-sdio.txt"
+#define BCM4354_FIRMWARE_NAME		"brcm/brcmfmac4354-sdio.bin"
+#define BCM4354_NVRAM_NAME		"brcm/brcmfmac4354-sdio.txt"
 
 MODULE_FIRMWARE(BCM43143_FIRMWARE_NAME);
 MODULE_FIRMWARE(BCM43143_NVRAM_NAME);
@@ -597,6 +599,8 @@ MODULE_FIRMWARE(BCM43362_FIRMWARE_NAME);
 MODULE_FIRMWARE(BCM43362_NVRAM_NAME);
 MODULE_FIRMWARE(BCM4339_FIRMWARE_NAME);
 MODULE_FIRMWARE(BCM4339_NVRAM_NAME);
+MODULE_FIRMWARE(BCM4354_FIRMWARE_NAME);
+MODULE_FIRMWARE(BCM4354_NVRAM_NAME);
 
 struct brcmf_firmware_names {
 	u32 chipid;
@@ -622,7 +626,8 @@ static const struct brcmf_firmware_names brcmf_fwname_data[] = {
 	{ BCM4334_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4334) },
 	{ BCM4335_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4335) },
 	{ BCM43362_CHIP_ID, 0xFFFFFFFE, BRCMF_FIRMWARE_NVRAM(BCM43362) },
-	{ BCM4339_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4339) }
+	{ BCM4339_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4339) },
+	{ BCM4354_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4354) }
 };
 
 
diff --git a/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h b/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h
index 6fa5d4863782..d816270db3be 100644
--- a/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h
+++ b/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h
@@ -43,5 +43,6 @@
 #define BCM4335_CHIP_ID		0x4335
 #define BCM43362_CHIP_ID	43362
 #define BCM4339_CHIP_ID		0x4339
+#define BCM4354_CHIP_ID		0x4354
 
 #endif				/* _BRCM_HW_IDS_H_ */
-- 
cgit v1.2.2


From fed7ec44e7ef647c1b1584164fe172963731f26d Mon Sep 17 00:00:00 2001
From: Hante Meuleman <meuleman@broadcom.com>
Date: Sat, 15 Mar 2014 17:18:18 +0100
Subject: brcmfmac: Protect tx seq number for data and control

SDIO tx uses a sequence number which is common for data
and control. This requires that access to this sequence number
is protected. A mutex was used to achieve this, but it also
required the reordering of code for tx control.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 214 +++++++++++----------
 1 file changed, 108 insertions(+), 106 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index 4aa8678590d5..bcdaf72389f3 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -458,10 +458,11 @@ struct brcmf_sdio {
 	bool alp_only;		/* Don't use HT clock (ALP only) */
 
 	u8 *ctrl_frame_buf;
-	u32 ctrl_frame_len;
+	u16 ctrl_frame_len;
 	bool ctrl_frame_stat;
 
-	spinlock_t txqlock;
+	spinlock_t txq_lock;		/* protect bus->txq */
+	struct semaphore tx_seq_lock;	/* protect bus->tx_seq */
 	wait_queue_head_t ctrl_wait;
 	wait_queue_head_t dcmd_resp_wait;
 
@@ -2316,13 +2317,15 @@ static uint brcmf_sdio_sendfromq(struct brcmf_sdio *bus, uint maxframes)
 	/* Send frames until the limit or some other event */
 	for (cnt = 0; (cnt < maxframes) && data_ok(bus);) {
 		pkt_num = 1;
-		__skb_queue_head_init(&pktq);
+		if (down_interruptible(&bus->tx_seq_lock))
+			return cnt;
 		if (bus->txglom)
 			pkt_num = min_t(u8, bus->tx_max - bus->tx_seq,
 					bus->sdiodev->txglomsz);
 		pkt_num = min_t(u32, pkt_num,
 				brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol));
-		spin_lock_bh(&bus->txqlock);
+		__skb_queue_head_init(&pktq);
+		spin_lock_bh(&bus->txq_lock);
 		for (i = 0; i < pkt_num; i++) {
 			pkt = brcmu_pktq_mdeq(&bus->txq, tx_prec_map,
 					      &prec_out);
@@ -2330,11 +2333,15 @@ static uint brcmf_sdio_sendfromq(struct brcmf_sdio *bus, uint maxframes)
 				break;
 			__skb_queue_tail(&pktq, pkt);
 		}
-		spin_unlock_bh(&bus->txqlock);
-		if (i == 0)
+		spin_unlock_bh(&bus->txq_lock);
+		if (i == 0) {
+			up(&bus->tx_seq_lock);
 			break;
+		}
 
 		ret = brcmf_sdio_txpkt(bus, &pktq, SDPCM_DATA_CHANNEL);
+		up(&bus->tx_seq_lock);
+
 		cnt += i;
 
 		/* In poll mode, need to check for other events */
@@ -2363,6 +2370,68 @@ static uint brcmf_sdio_sendfromq(struct brcmf_sdio *bus, uint maxframes)
 	return cnt;
 }
 
+static int brcmf_sdio_tx_ctrlframe(struct brcmf_sdio *bus, u8 *frame, u16 len)
+{
+	u8 doff;
+	u16 pad;
+	uint retries = 0;
+	struct brcmf_sdio_hdrinfo hd_info = {0};
+	int ret;
+
+	brcmf_dbg(TRACE, "Enter\n");
+
+	/* Back the pointer to make room for bus header */
+	frame -= bus->tx_hdrlen;
+	len += bus->tx_hdrlen;
+
+	/* Add alignment padding (optional for ctl frames) */
+	doff = ((unsigned long)frame % bus->head_align);
+	if (doff) {
+		frame -= doff;
+		len += doff;
+		memset(frame + bus->tx_hdrlen, 0, doff);
+	}
+
+	/* Round send length to next SDIO block */
+	pad = 0;
+	if (bus->roundup && bus->blocksize && (len > bus->blocksize)) {
+		pad = bus->blocksize - (len % bus->blocksize);
+		if ((pad > bus->roundup) || (pad >= bus->blocksize))
+			pad = 0;
+	} else if (len % bus->head_align) {
+		pad = bus->head_align - (len % bus->head_align);
+	}
+	len += pad;
+
+	hd_info.len = len - pad;
+	hd_info.channel = SDPCM_CONTROL_CHANNEL;
+	hd_info.dat_offset = doff + bus->tx_hdrlen;
+	hd_info.seq_num = bus->tx_seq;
+	hd_info.lastfrm = true;
+	hd_info.tail_pad = pad;
+	brcmf_sdio_hdpack(bus, frame, &hd_info);
+
+	if (bus->txglom)
+		brcmf_sdio_update_hwhdr(frame, len);
+
+	brcmf_dbg_hex_dump(BRCMF_BYTES_ON() && BRCMF_CTL_ON(),
+			   frame, len, "Tx Frame:\n");
+	brcmf_dbg_hex_dump(!(BRCMF_BYTES_ON() && BRCMF_CTL_ON()) &&
+			   BRCMF_HDRS_ON(),
+			   frame, min_t(u16, len, 16), "TxHdr:\n");
+
+	do {
+		ret = brcmf_sdiod_send_buf(bus->sdiodev, frame, len);
+
+		if (ret < 0)
+			brcmf_sdio_txfail(bus);
+		else
+			bus->tx_seq = (bus->tx_seq + 1) % SDPCM_SEQ_WRAP;
+	} while (ret < 0 && retries++ < TXRETRIES);
+
+	return ret;
+}
+
 static void brcmf_sdio_bus_stop(struct device *dev)
 {
 	u32 local_hostintmask;
@@ -2596,26 +2665,23 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus)
 
 	brcmf_sdio_clrintr(bus);
 
-	if (data_ok(bus) && bus->ctrl_frame_stat &&
-	    (bus->clkstate == CLK_AVAIL)) {
-
-		sdio_claim_host(bus->sdiodev->func[1]);
-		err = brcmf_sdiod_send_buf(bus->sdiodev, bus->ctrl_frame_buf,
-					   (u32)bus->ctrl_frame_len);
-
-		if (err < 0)
-			brcmf_sdio_txfail(bus);
-		else
-			bus->tx_seq = (bus->tx_seq + 1) % SDPCM_SEQ_WRAP;
+	if (bus->ctrl_frame_stat && (bus->clkstate == CLK_AVAIL) &&
+	    (down_interruptible(&bus->tx_seq_lock) == 0)) {
+		if (data_ok(bus)) {
+			sdio_claim_host(bus->sdiodev->func[1]);
+			err = brcmf_sdio_tx_ctrlframe(bus,  bus->ctrl_frame_buf,
+						      bus->ctrl_frame_len);
+			sdio_release_host(bus->sdiodev->func[1]);
 
-		sdio_release_host(bus->sdiodev->func[1]);
-		bus->ctrl_frame_stat = false;
-		brcmf_sdio_wait_event_wakeup(bus);
+			bus->ctrl_frame_stat = false;
+			brcmf_sdio_wait_event_wakeup(bus);
+		}
+		up(&bus->tx_seq_lock);
 	}
 	/* Send queued frames (limit 1 if rx may still be pending) */
-	else if ((bus->clkstate == CLK_AVAIL) && !atomic_read(&bus->fcstate) &&
-		 brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol) && txlimit
-		 && data_ok(bus)) {
+	if ((bus->clkstate == CLK_AVAIL) && !atomic_read(&bus->fcstate) &&
+	    brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol) && txlimit &&
+	    data_ok(bus)) {
 		framecnt = bus->rxpending ? min(txlimit, bus->txminmax) :
 					    txlimit;
 		brcmf_sdio_sendfromq(bus, framecnt);
@@ -2649,7 +2715,6 @@ static int brcmf_sdio_bus_txdata(struct device *dev, struct sk_buff *pkt)
 	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
 	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
 	struct brcmf_sdio *bus = sdiodev->bus;
-	ulong flags;
 
 	brcmf_dbg(TRACE, "Enter: pkt: data %p len %d\n", pkt->data, pkt->len);
 
@@ -2665,7 +2730,7 @@ static int brcmf_sdio_bus_txdata(struct device *dev, struct sk_buff *pkt)
 	bus->sdcnt.fcqueued++;
 
 	/* Priority based enq */
-	spin_lock_irqsave(&bus->txqlock, flags);
+	spin_lock_bh(&bus->txq_lock);
 	/* reset bus_flags in packet cb */
 	*(u16 *)(pkt->cb) = 0;
 	if (!brcmf_c_prec_enq(bus->sdiodev->dev, &bus->txq, pkt, prec)) {
@@ -2680,7 +2745,7 @@ static int brcmf_sdio_bus_txdata(struct device *dev, struct sk_buff *pkt)
 		bus->txoff = true;
 		brcmf_txflowblock(bus->sdiodev->dev, true);
 	}
-	spin_unlock_irqrestore(&bus->txqlock, flags);
+	spin_unlock_bh(&bus->txq_lock);
 
 #ifdef DEBUG
 	if (pktq_plen(&bus->txq, prec) > qcount[prec])
@@ -2775,87 +2840,27 @@ break2:
 }
 #endif				/* DEBUG */
 
-static int brcmf_sdio_tx_frame(struct brcmf_sdio *bus, u8 *frame, u16 len)
-{
-	int ret;
-
-	bus->ctrl_frame_stat = false;
-	ret = brcmf_sdiod_send_buf(bus->sdiodev, frame, len);
-
-	if (ret < 0)
-		brcmf_sdio_txfail(bus);
-	else
-		bus->tx_seq = (bus->tx_seq + 1) % SDPCM_SEQ_WRAP;
-
-	return ret;
-}
-
 static int
 brcmf_sdio_bus_txctl(struct device *dev, unsigned char *msg, uint msglen)
 {
-	u8 *frame;
-	u16 len, pad;
-	uint retries = 0;
-	u8 doff = 0;
-	int ret = -1;
 	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
 	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
 	struct brcmf_sdio *bus = sdiodev->bus;
-	struct brcmf_sdio_hdrinfo hd_info = {0};
+	int ret = -1;
 
 	brcmf_dbg(TRACE, "Enter\n");
 
-	/* Back the pointer to make a room for bus header */
-	frame = msg - bus->tx_hdrlen;
-	len = (msglen += bus->tx_hdrlen);
-
-	/* Add alignment padding (optional for ctl frames) */
-	doff = ((unsigned long)frame % bus->head_align);
-	if (doff) {
-		frame -= doff;
-		len += doff;
-		msglen += doff;
-		memset(frame, 0, doff + bus->tx_hdrlen);
-	}
-	/* precondition: doff < bus->head_align */
-	doff += bus->tx_hdrlen;
-
-	/* Round send length to next SDIO block */
-	pad = 0;
-	if (bus->roundup && bus->blocksize && (len > bus->blocksize)) {
-		pad = bus->blocksize - (len % bus->blocksize);
-		if ((pad > bus->roundup) || (pad >= bus->blocksize))
-			pad = 0;
-	} else if (len % bus->head_align) {
-		pad = bus->head_align - (len % bus->head_align);
-	}
-	len += pad;
-
-	/* precondition: IS_ALIGNED((unsigned long)frame, 2) */
-
-	/* Make sure backplane clock is on */
-	sdio_claim_host(bus->sdiodev->func[1]);
-	brcmf_sdio_bus_sleep(bus, false, false);
-	sdio_release_host(bus->sdiodev->func[1]);
-
-	hd_info.len = (u16)msglen;
-	hd_info.channel = SDPCM_CONTROL_CHANNEL;
-	hd_info.dat_offset = doff;
-	hd_info.seq_num = bus->tx_seq;
-	hd_info.lastfrm = true;
-	hd_info.tail_pad = pad;
-	brcmf_sdio_hdpack(bus, frame, &hd_info);
-
-	if (bus->txglom)
-		brcmf_sdio_update_hwhdr(frame, len);
+	if (down_interruptible(&bus->tx_seq_lock))
+		return -EINTR;
 
 	if (!data_ok(bus)) {
 		brcmf_dbg(INFO, "No bus credit bus->tx_max %d, bus->tx_seq %d\n",
 			  bus->tx_max, bus->tx_seq);
-		bus->ctrl_frame_stat = true;
+		up(&bus->tx_seq_lock);
 		/* Send from dpc */
-		bus->ctrl_frame_buf = frame;
-		bus->ctrl_frame_len = len;
+		bus->ctrl_frame_buf = msg;
+		bus->ctrl_frame_len = msglen;
+		bus->ctrl_frame_stat = true;
 
 		wait_event_interruptible_timeout(bus->ctrl_wait,
 						 !bus->ctrl_frame_stat,
@@ -2866,22 +2871,18 @@ brcmf_sdio_bus_txctl(struct device *dev, unsigned char *msg, uint msglen)
 			ret = 0;
 		} else {
 			brcmf_dbg(SDIO, "ctrl_frame_stat == true\n");
+			bus->ctrl_frame_stat = false;
+			if (down_interruptible(&bus->tx_seq_lock))
+				return -EINTR;
 			ret = -1;
 		}
 	}
-
 	if (ret == -1) {
-		brcmf_dbg_hex_dump(BRCMF_BYTES_ON() && BRCMF_CTL_ON(),
-				   frame, len, "Tx Frame:\n");
-		brcmf_dbg_hex_dump(!(BRCMF_BYTES_ON() && BRCMF_CTL_ON()) &&
-				   BRCMF_HDRS_ON(),
-				   frame, min_t(u16, len, 16), "TxHdr:\n");
-
-		do {
-			sdio_claim_host(bus->sdiodev->func[1]);
-			ret = brcmf_sdio_tx_frame(bus, frame, len);
-			sdio_release_host(bus->sdiodev->func[1]);
-		} while (ret < 0 && retries++ < TXRETRIES);
+		sdio_claim_host(bus->sdiodev->func[1]);
+		brcmf_sdio_bus_sleep(bus, false, false);
+		ret = brcmf_sdio_tx_ctrlframe(bus, msg, msglen);
+		sdio_release_host(bus->sdiodev->func[1]);
+		up(&bus->tx_seq_lock);
 	}
 
 	if (ret)
@@ -4052,7 +4053,8 @@ struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev)
 	}
 
 	spin_lock_init(&bus->rxctl_lock);
-	spin_lock_init(&bus->txqlock);
+	spin_lock_init(&bus->txq_lock);
+	sema_init(&bus->tx_seq_lock, 1);
 	init_waitqueue_head(&bus->ctrl_wait);
 	init_waitqueue_head(&bus->dcmd_resp_wait);
 
-- 
cgit v1.2.2


From 63dd99e699f2d5e70bf3b3b28fa59fb2c8c640c7 Mon Sep 17 00:00:00 2001
From: Hante Meuleman <meuleman@broadcom.com>
Date: Sat, 15 Mar 2014 17:18:19 +0100
Subject: brcmfmac: Improve scanning settings for connect.

When connecting without specifying the channel it can take quite
some time to connect. This is because not all parameters for the
scan operation are set to optimized values. This patch changes
these parameters resulting in a much faster connect in certain
situations.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 .../net/wireless/brcm80211/brcmfmac/wl_cfg80211.c  | 34 +++++++++++++---------
 1 file changed, 20 insertions(+), 14 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
index 00bd1e16c3ce..adbd5b733147 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
@@ -1682,22 +1682,9 @@ brcmf_cfg80211_connect(struct wiphy *wiphy, struct net_device *ndev,
 	ext_join_params->ssid_le.SSID_len = cpu_to_le32(profile->ssid.SSID_len);
 	memcpy(&ext_join_params->ssid_le.SSID, sme->ssid,
 	       profile->ssid.SSID_len);
-	/*increase dwell time to receive probe response or detect Beacon
-	 * from target AP at a noisy air only during connect command
-	 */
-	ext_join_params->scan_le.active_time =
-		cpu_to_le32(BRCMF_SCAN_JOIN_ACTIVE_DWELL_TIME_MS);
-	ext_join_params->scan_le.passive_time =
-		cpu_to_le32(BRCMF_SCAN_JOIN_PASSIVE_DWELL_TIME_MS);
+
 	/* Set up join scan parameters */
 	ext_join_params->scan_le.scan_type = -1;
-	/* to sync with presence period of VSDB GO.
-	 * Send probe request more frequently. Probe request will be stopped
-	 * when it gets probe response from target AP/GO.
-	 */
-	ext_join_params->scan_le.nprobes =
-		cpu_to_le32(BRCMF_SCAN_JOIN_ACTIVE_DWELL_TIME_MS /
-			    BRCMF_SCAN_JOIN_PROBE_INTERVAL_MS);
 	ext_join_params->scan_le.home_time = cpu_to_le32(-1);
 
 	if (sme->bssid)
@@ -1710,6 +1697,25 @@ brcmf_cfg80211_connect(struct wiphy *wiphy, struct net_device *ndev,
 
 		ext_join_params->assoc_le.chanspec_list[0] =
 			cpu_to_le16(chanspec);
+		/* Increase dwell time to receive probe response or detect
+		 * beacon from target AP at a noisy air only during connect
+		 * command.
+		 */
+		ext_join_params->scan_le.active_time =
+			cpu_to_le32(BRCMF_SCAN_JOIN_ACTIVE_DWELL_TIME_MS);
+		ext_join_params->scan_le.passive_time =
+			cpu_to_le32(BRCMF_SCAN_JOIN_PASSIVE_DWELL_TIME_MS);
+		/* To sync with presence period of VSDB GO send probe request
+		 * more frequently. Probe request will be stopped when it gets
+		 * probe response from target AP/GO.
+		 */
+		ext_join_params->scan_le.nprobes =
+			cpu_to_le32(BRCMF_SCAN_JOIN_ACTIVE_DWELL_TIME_MS /
+				    BRCMF_SCAN_JOIN_PROBE_INTERVAL_MS);
+	} else {
+		ext_join_params->scan_le.active_time = cpu_to_le32(-1);
+		ext_join_params->scan_le.passive_time = cpu_to_le32(-1);
+		ext_join_params->scan_le.nprobes = cpu_to_le32(-1);
 	}
 
 	err  = brcmf_fil_bsscfg_data_set(ifp, "join", ext_join_params,
-- 
cgit v1.2.2


From 8a385ba542dd6d20e3067d486f5f75ff71baa4db Mon Sep 17 00:00:00 2001
From: Arend van Spriel <arend@broadcom.com>
Date: Sat, 15 Mar 2014 17:18:20 +0100
Subject: brcmfmac: assure active clock request upon entering SLEEP state

When the SDIO driver goes in low power state it must assure that
a clock request in ChipCLKCSR is set. Otherwise waking up the
device can fail. The register is read and if necessary the ALP
clock will be requested.

Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 39 ++++++++++++++++------
 1 file changed, 28 insertions(+), 11 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index bcdaf72389f3..859eddd526ef 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -175,6 +175,7 @@ struct rte_console {
 #define SBSDIO_ALP_AVAIL		0x40
 /* Status: HT is ready */
 #define SBSDIO_HT_AVAIL			0x80
+#define SBSDIO_CSR_MASK			0x1F
 #define SBSDIO_AVBITS		(SBSDIO_HT_AVAIL | SBSDIO_ALP_AVAIL)
 #define SBSDIO_ALPAV(regval)	((regval) & SBSDIO_AVBITS)
 #define SBSDIO_HTAV(regval)	(((regval) & SBSDIO_AVBITS) == SBSDIO_AVBITS)
@@ -720,16 +721,12 @@ brcmf_sdio_kso_control(struct brcmf_sdio *bus, bool on)
 	int err = 0;
 	int try_cnt = 0;
 
-	brcmf_dbg(TRACE, "Enter\n");
+	brcmf_dbg(TRACE, "Enter: on=%d\n", on);
 
 	wr_val = (on << SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT);
 	/* 1st KSO write goes to AOS wake up core if device is asleep  */
 	brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR,
 			  wr_val, &err);
-	if (err) {
-		brcmf_err("SDIO_AOS KSO write error: %d\n", err);
-		return err;
-	}
 
 	if (on) {
 		/* device WAKEUP through KSO:
@@ -759,13 +756,19 @@ brcmf_sdio_kso_control(struct brcmf_sdio *bus, bool on)
 					   &err);
 		if (((rd_val & bmask) == cmp_val) && !err)
 			break;
-		brcmf_dbg(SDIO, "KSO wr/rd retry:%d (max: %d) ERR:%x\n",
-			  try_cnt, MAX_KSO_ATTEMPTS, err);
+
 		udelay(KSO_WAIT_US);
 		brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR,
 				  wr_val, &err);
 	} while (try_cnt++ < MAX_KSO_ATTEMPTS);
 
+	if (try_cnt > 2)
+		brcmf_dbg(SDIO, "try_cnt=%d rd_val=0x%x err=%d\n", try_cnt,
+			  rd_val, err);
+
+	if (try_cnt > MAX_KSO_ATTEMPTS)
+		brcmf_err("max tries: rd_val=0x%x err=%d\n", rd_val, err);
+
 	return err;
 }
 
@@ -966,6 +969,7 @@ static int
 brcmf_sdio_bus_sleep(struct brcmf_sdio *bus, bool sleep, bool pendok)
 {
 	int err = 0;
+	u8 clkcsr;
 
 	brcmf_dbg(SDIO, "Enter: request %s currently %s\n",
 		  (sleep ? "SLEEP" : "WAKE"),
@@ -984,8 +988,20 @@ brcmf_sdio_bus_sleep(struct brcmf_sdio *bus, bool sleep, bool pendok)
 			    atomic_read(&bus->ipend) > 0 ||
 			    (!atomic_read(&bus->fcstate) &&
 			    brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol) &&
-			    data_ok(bus)))
-				 return -EBUSY;
+			    data_ok(bus))) {
+				 err = -EBUSY;
+				 goto done;
+			}
+
+			clkcsr = brcmf_sdiod_regrb(bus->sdiodev,
+						   SBSDIO_FUNC1_CHIPCLKCSR,
+						   &err);
+			if ((clkcsr & SBSDIO_CSR_MASK) == 0) {
+				brcmf_dbg(SDIO, "no clock, set ALP\n");
+				brcmf_sdiod_regwb(bus->sdiodev,
+						  SBSDIO_FUNC1_CHIPCLKCSR,
+						  SBSDIO_ALP_AVAIL_REQ, &err);
+			}
 			err = brcmf_sdio_kso_control(bus, false);
 			/* disable watchdog */
 			if (!err)
@@ -1002,7 +1018,7 @@ brcmf_sdio_bus_sleep(struct brcmf_sdio *bus, bool sleep, bool pendok)
 		} else {
 			brcmf_err("error while changing bus sleep state %d\n",
 				  err);
-			return err;
+			goto done;
 		}
 	}
 
@@ -1014,7 +1030,8 @@ end:
 	} else {
 		brcmf_sdio_clkctl(bus, CLK_AVAIL, pendok);
 	}
-
+done:
+	brcmf_dbg(SDIO, "Exit: err=%d\n", err);
 	return err;
 
 }
-- 
cgit v1.2.2


From 967fe2c82dd8f8d16e873ebdf2328ec4d3258930 Mon Sep 17 00:00:00 2001
From: Arend van Spriel <arend@broadcom.com>
Date: Sat, 15 Mar 2014 17:18:21 +0100
Subject: brcmfmac: remove mode field from brcmf_cfg80211_vif structure

The nl80211 iftype was converted to a mode value and stored in
brcmf_cfg80211_vif structure. The value was used only within
brcmfmac driver to decide execution of conditional code. Better
use wireless_dev::iftype for that as the wdev is contained in
the brcmf_cfg80211_vif structure.

Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/p2p.c      |  6 +--
 .../net/wireless/brcm80211/brcmfmac/wl_cfg80211.c  | 60 +++++++---------------
 .../net/wireless/brcm80211/brcmfmac/wl_cfg80211.h  | 17 ------
 3 files changed, 21 insertions(+), 62 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
index fc4f98b275d7..f3445ac627e4 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
@@ -797,7 +797,8 @@ static s32 brcmf_p2p_run_escan(struct brcmf_cfg80211_info *cfg,
 			/* SOCIAL CHANNELS 1, 6, 11 */
 			search_state = WL_P2P_DISC_ST_SEARCH;
 			brcmf_dbg(INFO, "P2P SEARCH PHASE START\n");
-		} else if (dev != NULL && vif->mode == WL_MODE_AP) {
+		} else if (dev != NULL &&
+			   vif->wdev.iftype == NL80211_IFTYPE_P2P_GO) {
 			/* If you are already a GO, then do SEARCH only */
 			brcmf_dbg(INFO, "Already a GO. Do SEARCH Only\n");
 			search_state = WL_P2P_DISC_ST_SEARCH;
@@ -2256,7 +2257,6 @@ struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name,
 	struct brcmf_if *ifp = netdev_priv(cfg_to_ndev(cfg));
 	struct brcmf_cfg80211_vif *vif;
 	enum brcmf_fil_p2p_if_types iftype;
-	enum wl_mode mode;
 	int err;
 
 	if (brcmf_cfg80211_vif_event_armed(cfg))
@@ -2267,11 +2267,9 @@ struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name,
 	switch (type) {
 	case NL80211_IFTYPE_P2P_CLIENT:
 		iftype = BRCMF_FIL_P2P_IF_CLIENT;
-		mode = WL_MODE_BSS;
 		break;
 	case NL80211_IFTYPE_P2P_GO:
 		iftype = BRCMF_FIL_P2P_IF_GO;
-		mode = WL_MODE_AP;
 		break;
 	case NL80211_IFTYPE_P2P_DEVICE:
 		return brcmf_p2p_create_p2pdev(&cfg->p2p, wiphy,
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
index adbd5b733147..9f75afb3baa0 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
@@ -494,6 +494,19 @@ brcmf_configure_arp_offload(struct brcmf_if *ifp, bool enable)
 	return err;
 }
 
+static bool brcmf_is_apmode(struct brcmf_cfg80211_vif *vif)
+{
+	enum nl80211_iftype iftype;
+
+	iftype = vif->wdev.iftype;
+	return iftype == NL80211_IFTYPE_AP || iftype == NL80211_IFTYPE_P2P_GO;
+}
+
+static bool brcmf_is_ibssmode(struct brcmf_cfg80211_vif *vif)
+{
+	return vif->wdev.iftype == NL80211_IFTYPE_ADHOC;
+}
+
 static struct wireless_dev *brcmf_cfg80211_add_iface(struct wiphy *wiphy,
 						     const char *name,
 						     enum nl80211_iftype type,
@@ -654,7 +667,6 @@ brcmf_cfg80211_change_iface(struct wiphy *wiphy, struct net_device *ndev,
 			  type);
 		return -EOPNOTSUPP;
 	case NL80211_IFTYPE_ADHOC:
-		vif->mode = WL_MODE_IBSS;
 		infra = 0;
 		break;
 	case NL80211_IFTYPE_STATION:
@@ -670,12 +682,10 @@ brcmf_cfg80211_change_iface(struct wiphy *wiphy, struct net_device *ndev,
 			 */
 			return 0;
 		}
-		vif->mode = WL_MODE_BSS;
 		infra = 1;
 		break;
 	case NL80211_IFTYPE_AP:
 	case NL80211_IFTYPE_P2P_GO:
-		vif->mode = WL_MODE_AP;
 		ap = 1;
 		break;
 	default:
@@ -699,7 +709,7 @@ brcmf_cfg80211_change_iface(struct wiphy *wiphy, struct net_device *ndev,
 			err = -EAGAIN;
 			goto done;
 		}
-		brcmf_dbg(INFO, "IF Type = %s\n", (vif->mode == WL_MODE_IBSS) ?
+		brcmf_dbg(INFO, "IF Type = %s\n", brcmf_is_ibssmode(vif) ?
 			  "Adhoc" : "Infra");
 	}
 	ndev->ieee80211_ptr->iftype = type;
@@ -1923,7 +1933,7 @@ brcmf_add_keyext(struct wiphy *wiphy, struct net_device *ndev,
 		brcmf_dbg(CONN, "Setting the key index %d\n", key.index);
 		memcpy(key.data, params->key, key.len);
 
-		if ((ifp->vif->mode != WL_MODE_AP) &&
+		if (!brcmf_is_apmode(ifp->vif) &&
 		    (params->cipher == WLAN_CIPHER_SUITE_TKIP)) {
 			brcmf_dbg(CONN, "Swapping RX/TX MIC key\n");
 			memcpy(keybuf, &key.data[24], sizeof(keybuf));
@@ -2022,7 +2032,7 @@ brcmf_cfg80211_add_key(struct wiphy *wiphy, struct net_device *ndev,
 		brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_WEP104\n");
 		break;
 	case WLAN_CIPHER_SUITE_TKIP:
-		if (ifp->vif->mode != WL_MODE_AP) {
+		if (!brcmf_is_apmode(ifp->vif)) {
 			brcmf_dbg(CONN, "Swapping RX/TX MIC key\n");
 			memcpy(keybuf, &key.data[24], sizeof(keybuf));
 			memcpy(&key.data[24], &key.data[16], sizeof(keybuf));
@@ -2183,7 +2193,7 @@ brcmf_cfg80211_get_station(struct wiphy *wiphy, struct net_device *ndev,
 	if (!check_vif_up(ifp->vif))
 		return -EIO;
 
-	if (ifp->vif->mode == WL_MODE_AP) {
+	if (brcmf_is_apmode(ifp->vif)) {
 		memcpy(&sta_info_le, mac, ETH_ALEN);
 		err = brcmf_fil_iovar_data_get(ifp, "sta_info",
 					       &sta_info_le,
@@ -2200,7 +2210,7 @@ brcmf_cfg80211_get_station(struct wiphy *wiphy, struct net_device *ndev,
 		}
 		brcmf_dbg(TRACE, "STA idle time : %d ms, connected time :%d sec\n",
 			  sinfo->inactive_time, sinfo->connected_time);
-	} else if (ifp->vif->mode == WL_MODE_BSS) {
+	} else if (ifp->vif->wdev.iftype == NL80211_IFTYPE_STATION) {
 		if (memcmp(mac, bssid, ETH_ALEN)) {
 			brcmf_err("Wrong Mac address cfg_mac-%pM wl_bssid-%pM\n",
 				  mac, bssid);
@@ -2482,11 +2492,6 @@ CleanUp:
 	return err;
 }
 
-static bool brcmf_is_ibssmode(struct brcmf_cfg80211_vif *vif)
-{
-	return vif->mode == WL_MODE_IBSS;
-}
-
 static s32 brcmf_update_bss_info(struct brcmf_cfg80211_info *cfg,
 				 struct brcmf_if *ifp)
 {
@@ -4259,32 +4264,6 @@ static struct cfg80211_ops wl_cfg80211_ops = {
 	CFG80211_TESTMODE_CMD(brcmf_cfg80211_testmode)
 };
 
-static s32 brcmf_nl80211_iftype_to_mode(enum nl80211_iftype type)
-{
-	switch (type) {
-	case NL80211_IFTYPE_AP_VLAN:
-	case NL80211_IFTYPE_WDS:
-	case NL80211_IFTYPE_MONITOR:
-	case NL80211_IFTYPE_MESH_POINT:
-		return -ENOTSUPP;
-	case NL80211_IFTYPE_ADHOC:
-		return WL_MODE_IBSS;
-	case NL80211_IFTYPE_STATION:
-	case NL80211_IFTYPE_P2P_CLIENT:
-		return WL_MODE_BSS;
-	case NL80211_IFTYPE_AP:
-	case NL80211_IFTYPE_P2P_GO:
-		return WL_MODE_AP;
-	case NL80211_IFTYPE_P2P_DEVICE:
-		return WL_MODE_P2P;
-	case NL80211_IFTYPE_UNSPECIFIED:
-	default:
-		break;
-	}
-
-	return -EINVAL;
-}
-
 static void brcmf_wiphy_pno_params(struct wiphy *wiphy)
 {
 	/* scheduled scan settings */
@@ -4409,7 +4388,6 @@ struct brcmf_cfg80211_vif *brcmf_alloc_vif(struct brcmf_cfg80211_info *cfg,
 	vif->wdev.wiphy = cfg->wiphy;
 	vif->wdev.iftype = type;
 
-	vif->mode = brcmf_nl80211_iftype_to_mode(type);
 	vif->pm_block = pm_block;
 	vif->roam_off = -1;
 
@@ -4703,7 +4681,7 @@ brcmf_notify_connect_status(struct brcmf_if *ifp,
 	s32 err = 0;
 	u16 reason;
 
-	if (ifp->vif->mode == WL_MODE_AP) {
+	if (brcmf_is_apmode(ifp->vif)) {
 		err = brcmf_notify_connect_status_ap(cfg, ndev, e, data);
 	} else if (brcmf_is_linkup(e)) {
 		brcmf_dbg(CONN, "Linkup\n");
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h
index 5715bb0708cf..283c525a44f7 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h
@@ -89,21 +89,6 @@ enum brcmf_scan_status {
 	BRCMF_SCAN_STATUS_SUPPRESS,
 };
 
-/**
- * enum wl_mode - driver mode of virtual interface.
- *
- * @WL_MODE_BSS: connects to BSS.
- * @WL_MODE_IBSS: operate as ad-hoc.
- * @WL_MODE_AP: operate as access-point.
- * @WL_MODE_P2P: provide P2P discovery.
- */
-enum wl_mode {
-	WL_MODE_BSS,
-	WL_MODE_IBSS,
-	WL_MODE_AP,
-	WL_MODE_P2P
-};
-
 /* dongle configuration */
 struct brcmf_cfg80211_conf {
 	u32 frag_threshold;
@@ -193,7 +178,6 @@ struct vif_saved_ie {
  * @ifp: lower layer interface pointer
  * @wdev: wireless device.
  * @profile: profile information.
- * @mode: operating mode.
  * @roam_off: roaming state.
  * @sme_state: SME state using enum brcmf_vif_status bits.
  * @pm_block: power-management blocked.
@@ -204,7 +188,6 @@ struct brcmf_cfg80211_vif {
 	struct brcmf_if *ifp;
 	struct wireless_dev wdev;
 	struct brcmf_cfg80211_profile profile;
-	s32 mode;
 	s32 roam_off;
 	unsigned long sme_state;
 	bool pm_block;
-- 
cgit v1.2.2


From bf888184f8857b03f53bba84acb12f29f1068ea9 Mon Sep 17 00:00:00 2001
From: Andrea Merello <andrea.merello@gmail.com>
Date: Sat, 15 Mar 2014 18:29:35 +0100
Subject: rtl8180: remove too-early-added rtl8187se enum value

While changing board-type variable to enum, I have added enum
value for rtl8187se by mistake.
This will causes gcc warnings with unhandled switch/cases.

Remove it temporarily until I will push also rtl8187se changes.

Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl8180/rtl8180.h | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h b/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
index b4a1c7958d69..c2f1c9d5a3bb 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
+++ b/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
@@ -85,7 +85,6 @@ struct rtl8180_priv {
 	enum {
 		RTL818X_CHIP_FAMILY_RTL8180,
 		RTL818X_CHIP_FAMILY_RTL8185,
-		RTL818X_CHIP_FAMILY_RTL8187SE
 	} chip_family;
 	u32 anaparam;
 	u16 rfparam;
-- 
cgit v1.2.2


From 516a0930195e996512495fbdedf6cc298eb96c66 Mon Sep 17 00:00:00 2001
From: Andrea Merello <andrea.merello@gmail.com>
Date: Sat, 15 Mar 2014 18:29:36 +0100
Subject: rtl8180: support for BSS_CHANGED_BASIC_RATES

Basic rates setting is done with hardcoded register write with
fixed settings.

This patch introduces a new function that makes it possible to
configure basic rates and it add a check for mac80211
BSS_CHANGED_BASIC_RATES flag in order to eventually invoke that
function when needed.

Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl8180/dev.c | 51 ++++++++++++++++++++++++++----
 1 file changed, 45 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c
index 3c2b784fd783..ede8fee13332 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c
@@ -371,6 +371,36 @@ void rtl8180_set_anaparam(struct rtl8180_priv *priv, u32 anaparam)
 	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
 }
 
+static void rtl8180_conf_basic_rates(struct ieee80211_hw *dev,
+			    u32 rates_mask)
+{
+	struct rtl8180_priv *priv = dev->priv;
+
+	u8 max, min;
+	u16 reg;
+
+	max = fls(rates_mask) - 1;
+	min = ffs(rates_mask) - 1;
+
+	switch (priv->chip_family) {
+
+	case RTL818X_CHIP_FAMILY_RTL8180:
+		/* in 8180 this is NOT a BITMAP */
+		reg = rtl818x_ioread16(priv, &priv->map->BRSR);
+		reg &= ~3;
+		reg |= max;
+		rtl818x_iowrite16(priv, &priv->map->BRSR, reg);
+
+		break;
+
+	case RTL818X_CHIP_FAMILY_RTL8185:
+		/* in 8185 this is a BITMAP */
+		rtl818x_iowrite16(priv, &priv->map->BRSR, rates_mask);
+		rtl818x_iowrite8(priv, &priv->map->RESP_RATE, (max << 4) | min);
+		break;
+	}
+}
+
 static int rtl8180_init_hw(struct ieee80211_hw *dev)
 {
 	struct rtl8180_priv *priv = dev->priv;
@@ -441,9 +471,6 @@ static int rtl8180_init_hw(struct ieee80211_hw *dev)
 	if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180) {
 		rtl818x_iowrite8(priv, &priv->map->WPA_CONF, 0);
 		rtl818x_iowrite8(priv, &priv->map->RATE_FALLBACK, 0x81);
-		rtl818x_iowrite8(priv, &priv->map->RESP_RATE, (8 << 4) | 0);
-
-		rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3);
 
 		/* TODO: set ClkRun enable? necessary? */
 		reg = rtl818x_ioread8(priv, &priv->map->GP_ENABLE);
@@ -453,7 +480,6 @@ static int rtl8180_init_hw(struct ieee80211_hw *dev)
 		rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | (1 << 2));
 		rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
 	} else {
-		rtl818x_iowrite16(priv, &priv->map->BRSR, 0x1);
 		rtl818x_iowrite8(priv, &priv->map->SECURITY, 0);
 
 		rtl818x_iowrite8(priv, &priv->map->PHY_DELAY, 0x6);
@@ -461,8 +487,18 @@ static int rtl8180_init_hw(struct ieee80211_hw *dev)
 	}
 
 	priv->rf->init(dev);
-	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8185)
-		rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3);
+
+	/* default basic rates are 1,2 Mbps for rtl8180. 1,2,6,9,12,18,24 Mbps
+	 * otherwise. bitmask 0x3 and 0x01f3 respectively.
+	 * NOTE: currenty rtl8225 RF code changes basic rates, so we need to do
+	 * this after rf init.
+	 * TODO: try to find out whether RF code really needs to do this..
+	 */
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180)
+		rtl8180_conf_basic_rates(dev, 0x3);
+	else
+		rtl8180_conf_basic_rates(dev, 0x1f3);
+
 	return 0;
 }
 
@@ -857,6 +893,9 @@ static void rtl8180_bss_info_changed(struct ieee80211_hw *dev,
 		rtl818x_iowrite8(priv, &priv->map->MSR, reg);
 	}
 
+	if (changed & BSS_CHANGED_BASIC_RATES)
+		rtl8180_conf_basic_rates(dev, info->basic_rates);
+
 	if (changed & BSS_CHANGED_ERP_SLOT && priv->rf->conf_erp)
 		priv->rf->conf_erp(dev, info);
 
-- 
cgit v1.2.2


From 9069af794e8219d3ee4dff8aa84b2d201472ad16 Mon Sep 17 00:00:00 2001
From: Andrea Merello <andrea.merello@gmail.com>
Date: Sat, 15 Mar 2014 18:29:37 +0100
Subject: rtl8180: make *IFS and CW tunable by mac80211, and set them in the
 proper place

SLOT, SIFS, DIFS, EIFS, CW and ACK-timeout registers are set in an
RF-code callback and their values are fixed.

This patch moves this off the rf-code, and introduce two new functions
that calculate these values depending by slot time and CW values
requested by mac80211.

This seems to improve performances on my setup.

Currently the ack and slot time values could be stored in a local
variable, but this patch stores it in the driver "priv" structure
because it will be useful for rtl8187se support that will be added
(hopefully) soon.

Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl8180/dev.c     | 83 +++++++++++++++++++++++++-
 drivers/net/wireless/rtl818x/rtl8180/rtl8180.h |  2 +
 drivers/net/wireless/rtl818x/rtl8180/rtl8225.c | 22 -------
 3 files changed, 83 insertions(+), 24 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c
index ede8fee13332..9ee68fdc0535 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c
@@ -866,6 +866,72 @@ static int rtl8180_config(struct ieee80211_hw *dev, u32 changed)
 	return 0;
 }
 
+static int rtl8180_conf_tx(struct ieee80211_hw *dev,
+			    struct ieee80211_vif *vif, u16 queue,
+			    const struct ieee80211_tx_queue_params *params)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	u8 cw_min, cw_max;
+
+	/* nothing to do ? */
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180)
+		return 0;
+
+	cw_min = fls(params->cw_min);
+	cw_max = fls(params->cw_max);
+
+	rtl818x_iowrite8(priv, &priv->map->CW_VAL, (cw_max << 4) | cw_min);
+
+	return 0;
+}
+
+static void rtl8180_conf_erp(struct ieee80211_hw *dev,
+			    struct ieee80211_bss_conf *info)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	u8 sifs, difs;
+	int eifs;
+	u8 hw_eifs;
+
+	/* TODO: should we do something ? */
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180)
+		return;
+
+	/* I _hope_ this means 10uS for the HW.
+	 * In reference code it is 0x22 for
+	 * both rtl8187L and rtl8187SE
+	 */
+	sifs = 0x22;
+
+	if (info->use_short_slot)
+		priv->slot_time = 9;
+	else
+		priv->slot_time = 20;
+
+	/* 10 is SIFS time in uS */
+	difs = 10 + 2 * priv->slot_time;
+	eifs = 10 + difs + priv->ack_time;
+
+	/* HW should use 4uS units for EIFS (I'm sure for rtl8185)*/
+	hw_eifs = DIV_ROUND_UP(eifs, 4);
+
+
+	rtl818x_iowrite8(priv, &priv->map->SLOT, priv->slot_time);
+	rtl818x_iowrite8(priv, &priv->map->SIFS, sifs);
+	rtl818x_iowrite8(priv, &priv->map->DIFS, difs);
+
+	/* from reference code. set ack timeout reg = eifs reg */
+	rtl818x_iowrite8(priv, &priv->map->CARRIER_SENSE_COUNTER, hw_eifs);
+
+	/* rtl8187/rtl8185 HW bug. After EIFS is elapsed,
+	 * the HW still wait for DIFS.
+	 * HW uses 4uS units for EIFS.
+	 */
+	hw_eifs = DIV_ROUND_UP(eifs - difs, 4);
+
+	rtl818x_iowrite8(priv, &priv->map->EIFS, hw_eifs);
+}
+
 static void rtl8180_bss_info_changed(struct ieee80211_hw *dev,
 				     struct ieee80211_vif *vif,
 				     struct ieee80211_bss_conf *info,
@@ -896,8 +962,20 @@ static void rtl8180_bss_info_changed(struct ieee80211_hw *dev,
 	if (changed & BSS_CHANGED_BASIC_RATES)
 		rtl8180_conf_basic_rates(dev, info->basic_rates);
 
-	if (changed & BSS_CHANGED_ERP_SLOT && priv->rf->conf_erp)
-		priv->rf->conf_erp(dev, info);
+	if (changed & (BSS_CHANGED_ERP_SLOT | BSS_CHANGED_ERP_PREAMBLE)) {
+
+		/* when preamble changes, acktime duration changes, and erp must
+		 * be recalculated. ACK time is calculated at lowest rate.
+		 * Since mac80211 include SIFS time we remove it (-10)
+		 */
+		priv->ack_time =
+			le16_to_cpu(ieee80211_generic_frame_duration(dev,
+					priv->vif,
+					IEEE80211_BAND_2GHZ, 10,
+					&priv->rates[0])) - 10;
+
+		rtl8180_conf_erp(dev, info);
+	}
 
 	if (changed & BSS_CHANGED_BEACON_ENABLED)
 		vif_priv->enable_beacon = info->enable_beacon;
@@ -955,6 +1033,7 @@ static const struct ieee80211_ops rtl8180_ops = {
 	.remove_interface	= rtl8180_remove_interface,
 	.config			= rtl8180_config,
 	.bss_info_changed	= rtl8180_bss_info_changed,
+	.conf_tx		= rtl8180_conf_tx,
 	.prepare_multicast	= rtl8180_prepare_multicast,
 	.configure_filter	= rtl8180_configure_filter,
 	.get_tsf		= rtl8180_get_tsf,
diff --git a/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h b/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
index c2f1c9d5a3bb..7014bf0051a3 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
+++ b/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
@@ -81,6 +81,8 @@ struct rtl8180_priv {
 	struct ieee80211_supported_band band;
 	struct pci_dev *pdev;
 	u32 rx_conf;
+	u8 slot_time;
+	u16 ack_time;
 
 	enum {
 		RTL818X_CHIP_FAMILY_RTL8180,
diff --git a/drivers/net/wireless/rtl818x/rtl8180/rtl8225.c b/drivers/net/wireless/rtl818x/rtl8180/rtl8225.c
index d60a5f399022..1c0fe238d995 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/rtl8225.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/rtl8225.c
@@ -730,32 +730,11 @@ static void rtl8225_rf_set_channel(struct ieee80211_hw *dev,
 	msleep(10);
 }
 
-static void rtl8225_rf_conf_erp(struct ieee80211_hw *dev,
-				struct ieee80211_bss_conf *info)
-{
-	struct rtl8180_priv *priv = dev->priv;
-
-	if (info->use_short_slot) {
-		rtl818x_iowrite8(priv, &priv->map->SLOT, 0x9);
-		rtl818x_iowrite8(priv, &priv->map->SIFS, 0x22);
-		rtl818x_iowrite8(priv, &priv->map->DIFS, 0x14);
-		rtl818x_iowrite8(priv, &priv->map->EIFS, 81);
-		rtl818x_iowrite8(priv, &priv->map->CW_VAL, 0x73);
-	} else {
-		rtl818x_iowrite8(priv, &priv->map->SLOT, 0x14);
-		rtl818x_iowrite8(priv, &priv->map->SIFS, 0x44);
-		rtl818x_iowrite8(priv, &priv->map->DIFS, 0x24);
-		rtl818x_iowrite8(priv, &priv->map->EIFS, 81);
-		rtl818x_iowrite8(priv, &priv->map->CW_VAL, 0xa5);
-	}
-}
-
 static const struct rtl818x_rf_ops rtl8225_ops = {
 	.name		= "rtl8225",
 	.init		= rtl8225_rf_init,
 	.stop		= rtl8225_rf_stop,
 	.set_chan	= rtl8225_rf_set_channel,
-	.conf_erp	= rtl8225_rf_conf_erp,
 };
 
 static const struct rtl818x_rf_ops rtl8225z2_ops = {
@@ -763,7 +742,6 @@ static const struct rtl818x_rf_ops rtl8225z2_ops = {
 	.init		= rtl8225z2_rf_init,
 	.stop		= rtl8225_rf_stop,
 	.set_chan	= rtl8225_rf_set_channel,
-	.conf_erp	= rtl8225_rf_conf_erp,
 };
 
 const struct rtl818x_rf_ops * rtl8180_detect_rf(struct ieee80211_hw *dev)
-- 
cgit v1.2.2


From 7d4b829a93c9b2bd1ed68c26f42e803041726f4b Mon Sep 17 00:00:00 2001
From: Andrea Merello <andrea.merello@gmail.com>
Date: Sat, 15 Mar 2014 18:29:38 +0100
Subject: rtl8180: move eeprom read stuff in a separate function

Eeprom read operations are mixed in the probe function.
Make the code more readable and clean by extracting this code and
moving it in a dedicated function.

The variable eeprom_cck_table_adr, now useless, is here because
it will be needed for rtl8187se support, that I hope to add soon.

Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl8180/dev.c     | 128 ++++++++++++++-----------
 drivers/net/wireless/rtl818x/rtl8180/rtl8180.h |   3 +-
 2 files changed, 73 insertions(+), 58 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c
index 9ee68fdc0535..0b405b8c8d70 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c
@@ -1041,8 +1041,7 @@ static const struct ieee80211_ops rtl8180_ops = {
 
 static void rtl8180_eeprom_register_read(struct eeprom_93cx6 *eeprom)
 {
-	struct ieee80211_hw *dev = eeprom->data;
-	struct rtl8180_priv *priv = dev->priv;
+	struct rtl8180_priv *priv = eeprom->data;
 	u8 reg = rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
 
 	eeprom->reg_data_in = reg & RTL818X_EEPROM_CMD_WRITE;
@@ -1053,8 +1052,7 @@ static void rtl8180_eeprom_register_read(struct eeprom_93cx6 *eeprom)
 
 static void rtl8180_eeprom_register_write(struct eeprom_93cx6 *eeprom)
 {
-	struct ieee80211_hw *dev = eeprom->data;
-	struct rtl8180_priv *priv = dev->priv;
+	struct rtl8180_priv *priv = eeprom->data;
 	u8 reg = 2 << 6;
 
 	if (eeprom->reg_data_in)
@@ -1071,6 +1069,67 @@ static void rtl8180_eeprom_register_write(struct eeprom_93cx6 *eeprom)
 	udelay(10);
 }
 
+static void rtl8180_eeprom_read(struct rtl8180_priv *priv)
+{
+	struct eeprom_93cx6 eeprom;
+	int eeprom_cck_table_adr;
+	u16 eeprom_val;
+	int i;
+
+	eeprom.data = priv;
+	eeprom.register_read = rtl8180_eeprom_register_read;
+	eeprom.register_write = rtl8180_eeprom_register_write;
+	if (rtl818x_ioread32(priv, &priv->map->RX_CONF) & (1 << 6))
+		eeprom.width = PCI_EEPROM_WIDTH_93C66;
+	else
+		eeprom.width = PCI_EEPROM_WIDTH_93C46;
+
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
+			RTL818X_EEPROM_CMD_PROGRAM);
+	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+	udelay(10);
+
+	eeprom_93cx6_read(&eeprom, 0x06, &eeprom_val);
+	eeprom_val &= 0xFF;
+	priv->rf_type = eeprom_val;
+
+	eeprom_93cx6_read(&eeprom, 0x17, &eeprom_val);
+	priv->csthreshold = eeprom_val >> 8;
+
+	eeprom_93cx6_multiread(&eeprom, 0x7, (__le16 *)priv->mac_addr, 3);
+
+	eeprom_cck_table_adr = 0x10;
+
+	/* CCK TX power */
+	for (i = 0; i < 14; i += 2) {
+		u16 txpwr;
+		eeprom_93cx6_read(&eeprom, eeprom_cck_table_adr + (i >> 1),
+				&txpwr);
+		priv->channels[i].hw_value = txpwr & 0xFF;
+		priv->channels[i + 1].hw_value = txpwr >> 8;
+	}
+
+	/* OFDM TX power */
+	if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180) {
+		for (i = 0; i < 14; i += 2) {
+			u16 txpwr;
+			eeprom_93cx6_read(&eeprom, 0x20 + (i >> 1), &txpwr);
+			priv->channels[i].hw_value |= (txpwr & 0xFF) << 8;
+			priv->channels[i + 1].hw_value |= txpwr & 0xFF00;
+		}
+	}
+
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180) {
+		__le32 anaparam;
+		eeprom_93cx6_multiread(&eeprom, 0xD, (__le16 *)&anaparam, 2);
+		priv->anaparam = le32_to_cpu(anaparam);
+		eeprom_93cx6_read(&eeprom, 0x19, &priv->rfparam);
+	}
+
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
+			RTL818X_EEPROM_CMD_NORMAL);
+}
+
 static int rtl8180_probe(struct pci_dev *pdev,
 				   const struct pci_device_id *id)
 {
@@ -1078,12 +1137,9 @@ static int rtl8180_probe(struct pci_dev *pdev,
 	struct rtl8180_priv *priv;
 	unsigned long mem_addr, mem_len;
 	unsigned int io_addr, io_len;
-	int err, i;
-	struct eeprom_93cx6 eeprom;
+	int err;
 	const char *chip_name, *rf_name = NULL;
 	u32 reg;
-	u16 eeprom_val;
-	u8 mac_addr[ETH_ALEN];
 
 	err = pci_enable_device(pdev);
 	if (err) {
@@ -1201,21 +1257,9 @@ static int rtl8180_probe(struct pci_dev *pdev,
 		pci_try_set_mwi(pdev);
 	}
 
-	eeprom.data = dev;
-	eeprom.register_read = rtl8180_eeprom_register_read;
-	eeprom.register_write = rtl8180_eeprom_register_write;
-	if (rtl818x_ioread32(priv, &priv->map->RX_CONF) & (1 << 6))
-		eeprom.width = PCI_EEPROM_WIDTH_93C66;
-	else
-		eeprom.width = PCI_EEPROM_WIDTH_93C46;
-
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_PROGRAM);
-	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
-	udelay(10);
+	rtl8180_eeprom_read(priv);
 
-	eeprom_93cx6_read(&eeprom, 0x06, &eeprom_val);
-	eeprom_val &= 0xFF;
-	switch (eeprom_val) {
+	switch (priv->rf_type) {
 	case 1:	rf_name = "Intersil";
 		break;
 	case 2:	rf_name = "RFMD";
@@ -1233,7 +1277,7 @@ static int rtl8180_probe(struct pci_dev *pdev,
 		break;
 	default:
 		printk(KERN_ERR "%s (rtl8180): Unknown RF! (0x%x)\n",
-		       pci_name(pdev), eeprom_val);
+		       pci_name(pdev), priv->rf_type);
 		goto err_iounmap;
 	}
 
@@ -1243,42 +1287,12 @@ static int rtl8180_probe(struct pci_dev *pdev,
 		goto err_iounmap;
 	}
 
-	eeprom_93cx6_read(&eeprom, 0x17, &eeprom_val);
-	priv->csthreshold = eeprom_val >> 8;
-	if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8185) {
-		__le32 anaparam;
-		eeprom_93cx6_multiread(&eeprom, 0xD, (__le16 *)&anaparam, 2);
-		priv->anaparam = le32_to_cpu(anaparam);
-		eeprom_93cx6_read(&eeprom, 0x19, &priv->rfparam);
-	}
-
-	eeprom_93cx6_multiread(&eeprom, 0x7, (__le16 *)mac_addr, 3);
-	if (!is_valid_ether_addr(mac_addr)) {
+	if (!is_valid_ether_addr(priv->mac_addr)) {
 		printk(KERN_WARNING "%s (rtl8180): Invalid hwaddr! Using"
 		       " randomly generated MAC addr\n", pci_name(pdev));
-		eth_random_addr(mac_addr);
-	}
-	SET_IEEE80211_PERM_ADDR(dev, mac_addr);
-
-	/* CCK TX power */
-	for (i = 0; i < 14; i += 2) {
-		u16 txpwr;
-		eeprom_93cx6_read(&eeprom, 0x10 + (i >> 1), &txpwr);
-		priv->channels[i].hw_value = txpwr & 0xFF;
-		priv->channels[i + 1].hw_value = txpwr >> 8;
-	}
-
-	/* OFDM TX power */
-	if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180) {
-		for (i = 0; i < 14; i += 2) {
-			u16 txpwr;
-			eeprom_93cx6_read(&eeprom, 0x20 + (i >> 1), &txpwr);
-			priv->channels[i].hw_value |= (txpwr & 0xFF) << 8;
-			priv->channels[i + 1].hw_value |= txpwr & 0xFF00;
-		}
+		eth_random_addr(priv->mac_addr);
 	}
-
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+	SET_IEEE80211_PERM_ADDR(dev, priv->mac_addr);
 
 	spin_lock_init(&priv->lock);
 
@@ -1290,7 +1304,7 @@ static int rtl8180_probe(struct pci_dev *pdev,
 	}
 
 	wiphy_info(dev->wiphy, "hwaddr %pm, %s + %s\n",
-		   mac_addr, chip_name, priv->rf->name);
+		   priv->mac_addr, chip_name, priv->rf->name);
 
 	return 0;
 
diff --git a/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h b/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
index 7014bf0051a3..26383d77fc3a 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
+++ b/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
@@ -91,7 +91,8 @@ struct rtl8180_priv {
 	u32 anaparam;
 	u16 rfparam;
 	u8 csthreshold;
-
+	u8 mac_addr[ETH_ALEN];
+	u8 rf_type;
 	/* sequence # */
 	u16 seqno;
 };
-- 
cgit v1.2.2


From c08148bb7540c4547691c8fbe6db80edaf26cf10 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Mon, 17 Mar 2014 15:02:46 +0530
Subject: ath9k: Add QCA953x WMAC platform support

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ahb.c | 4 ++++
 drivers/net/wireless/ath/ath9k/hw.c  | 1 +
 2 files changed, 5 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/ahb.c b/drivers/net/wireless/ath/ath9k/ahb.c
index a5684c38dcd9..a0398fe3eb28 100644
--- a/drivers/net/wireless/ath/ath9k/ahb.c
+++ b/drivers/net/wireless/ath/ath9k/ahb.c
@@ -39,6 +39,10 @@ static const struct platform_device_id ath9k_platform_id_table[] = {
 		.name = "qca955x_wmac",
 		.driver_data = AR9300_DEVID_QCA955X,
 	},
+	{
+		.name = "qca953x_wmac",
+		.driver_data = AR9300_DEVID_AR953X,
+	},
 	{},
 };
 
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 2509c2ff0828..177cd16dfcec 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -3048,6 +3048,7 @@ static struct {
 	{ AR_SREV_VERSION_9462,         "9462" },
 	{ AR_SREV_VERSION_9550,         "9550" },
 	{ AR_SREV_VERSION_9565,         "9565" },
+	{ AR_SREV_VERSION_9531,         "9531" },
 };
 
 /* For devices with external radios */
-- 
cgit v1.2.2


From c90d4f7bc5b8595b86753d3c0b64259c3972b341 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Mon, 17 Mar 2014 15:02:47 +0530
Subject: ath9k: Disable AR_INTR_SYNC_HOST1_FATAL for QCA953x

Along with AR9340 and AR955x, this is also needed for
the QCA953x SoC.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/hw.c  | 2 +-
 drivers/net/wireless/ath/ath9k/mac.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 177cd16dfcec..0992f7c70e1a 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -882,7 +882,7 @@ static void ath9k_hw_init_interrupt_masks(struct ath_hw *ah,
 		AR_IMR_RXORN |
 		AR_IMR_BCNMISC;
 
-	if (AR_SREV_9340(ah) || AR_SREV_9550(ah))
+	if (AR_SREV_9340(ah) || AR_SREV_9550(ah) || AR_SREV_9531(ah))
 		sync_default &= ~AR_INTR_SYNC_HOST1_FATAL;
 
 	if (AR_SREV_9300_20_OR_LATER(ah)) {
diff --git a/drivers/net/wireless/ath/ath9k/mac.c b/drivers/net/wireless/ath/ath9k/mac.c
index 5f727588ca27..51ce36f108f9 100644
--- a/drivers/net/wireless/ath/ath9k/mac.c
+++ b/drivers/net/wireless/ath/ath9k/mac.c
@@ -827,7 +827,7 @@ void ath9k_hw_enable_interrupts(struct ath_hw *ah)
 		return;
 	}
 
-	if (AR_SREV_9340(ah) || AR_SREV_9550(ah))
+	if (AR_SREV_9340(ah) || AR_SREV_9550(ah) || AR_SREV_9531(ah))
 		sync_default &= ~AR_INTR_SYNC_HOST1_FATAL;
 
 	async_mask = AR_INTR_MAC_IRQ;
-- 
cgit v1.2.2


From d65b1278e314dc4023a70f338156d7b07941d93a Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Mon, 17 Mar 2014 15:02:48 +0530
Subject: ath9k: Fix temperature compensation

The registers for temperature compensation need to
be programmed only for active chains. Use the TX chainmask
to make sure that this is done properly for QCA953x.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 59 +++++++++++++++-----------
 1 file changed, 35 insertions(+), 24 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index d7625ecb6387..235053ba7737 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -4792,43 +4792,54 @@ static void ar9003_hw_power_control_override(struct ath_hw *ah,
 
 tempslope:
 	if (AR_SREV_9550(ah) || AR_SREV_9531(ah)) {
+		u8 txmask = (eep->baseEepHeader.txrxMask & 0xf0) >> 4;
+
 		/*
 		 * AR955x has tempSlope register for each chain.
 		 * Check whether temp_compensation feature is enabled or not.
 		 */
 		if (eep->baseEepHeader.featureEnable & 0x1) {
 			if (frequency < 4000) {
-				REG_RMW_FIELD(ah, AR_PHY_TPC_19,
-					      AR_PHY_TPC_19_ALPHA_THERM,
-					      eep->base_ext2.tempSlopeLow);
-				REG_RMW_FIELD(ah, AR_PHY_TPC_19_B1,
-					      AR_PHY_TPC_19_ALPHA_THERM,
-					      temp_slope);
-				REG_RMW_FIELD(ah, AR_PHY_TPC_19_B2,
-					      AR_PHY_TPC_19_ALPHA_THERM,
-					      eep->base_ext2.tempSlopeHigh);
+				if (txmask & BIT(0))
+					REG_RMW_FIELD(ah, AR_PHY_TPC_19,
+						      AR_PHY_TPC_19_ALPHA_THERM,
+						      eep->base_ext2.tempSlopeLow);
+				if (txmask & BIT(1))
+					REG_RMW_FIELD(ah, AR_PHY_TPC_19_B1,
+						      AR_PHY_TPC_19_ALPHA_THERM,
+						      temp_slope);
+				if (txmask & BIT(2))
+					REG_RMW_FIELD(ah, AR_PHY_TPC_19_B2,
+						      AR_PHY_TPC_19_ALPHA_THERM,
+						      eep->base_ext2.tempSlopeHigh);
 			} else {
-				REG_RMW_FIELD(ah, AR_PHY_TPC_19,
-					      AR_PHY_TPC_19_ALPHA_THERM,
-					      temp_slope);
-				REG_RMW_FIELD(ah, AR_PHY_TPC_19_B1,
-					      AR_PHY_TPC_19_ALPHA_THERM,
-					      temp_slope1);
-				REG_RMW_FIELD(ah, AR_PHY_TPC_19_B2,
-					      AR_PHY_TPC_19_ALPHA_THERM,
-					      temp_slope2);
+				if (txmask & BIT(0))
+					REG_RMW_FIELD(ah, AR_PHY_TPC_19,
+						      AR_PHY_TPC_19_ALPHA_THERM,
+						      temp_slope);
+				if (txmask & BIT(1))
+					REG_RMW_FIELD(ah, AR_PHY_TPC_19_B1,
+						      AR_PHY_TPC_19_ALPHA_THERM,
+						      temp_slope1);
+				if (txmask & BIT(2))
+					REG_RMW_FIELD(ah, AR_PHY_TPC_19_B2,
+						      AR_PHY_TPC_19_ALPHA_THERM,
+						      temp_slope2);
 			}
 		} else {
 			/*
 			 * If temp compensation is not enabled,
 			 * set all registers to 0.
 			 */
-			REG_RMW_FIELD(ah, AR_PHY_TPC_19,
-				      AR_PHY_TPC_19_ALPHA_THERM, 0);
-			REG_RMW_FIELD(ah, AR_PHY_TPC_19_B1,
-				      AR_PHY_TPC_19_ALPHA_THERM, 0);
-			REG_RMW_FIELD(ah, AR_PHY_TPC_19_B2,
-				      AR_PHY_TPC_19_ALPHA_THERM, 0);
+			if (txmask & BIT(0))
+				REG_RMW_FIELD(ah, AR_PHY_TPC_19,
+					      AR_PHY_TPC_19_ALPHA_THERM, 0);
+			if (txmask & BIT(1))
+				REG_RMW_FIELD(ah, AR_PHY_TPC_19_B1,
+					      AR_PHY_TPC_19_ALPHA_THERM, 0);
+			if (txmask & BIT(2))
+				REG_RMW_FIELD(ah, AR_PHY_TPC_19_B2,
+					      AR_PHY_TPC_19_ALPHA_THERM, 0);
 		}
 	} else {
 		REG_RMW_FIELD(ah, AR_PHY_TPC_19,
-- 
cgit v1.2.2


From a70abea5f556778f6a670b08a278d60e0c993a3f Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Mon, 17 Mar 2014 15:34:05 +0200
Subject: wil6210: Helpers to deal with 'cidxtid' fields

Encode/decode helpers

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wil6210/txrx.c    |  2 +-
 drivers/net/wireless/ath/wil6210/wil6210.h | 25 +++++++++++++++++++++++++
 2 files changed, 26 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index 092081e209da..7afaa5e5c42e 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -588,7 +588,7 @@ int wil_vring_init_tx(struct wil6210_priv *wil, int id, int size,
 				.ring_size = cpu_to_le16(size),
 			},
 			.ringid = id,
-			.cidxtid = (cid & 0xf) | ((tid & 0xf) << 4),
+			.cidxtid = mk_cidxtid(cid, tid),
 			.encap_trans_type = WMI_VRING_ENC_TYPE_802_3,
 			.mac_ctrl = 0,
 			.to_resolution = 0,
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index 980dccc82b32..273d00f86130 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -125,6 +125,31 @@ struct RGF_ICR {
 
 /* Hardware definitions end */
 
+/**
+ * mk_cidxtid - construct @cidxtid field
+ * @cid: CID value
+ * @tid: TID value
+ *
+ * @cidxtid field encoded as bits 0..3 - CID; 4..7 - TID
+ */
+static inline u8 mk_cidxtid(u8 cid, u8 tid)
+{
+	return ((tid & 0xf) << 4) | (cid & 0xf);
+}
+
+/**
+ * parse_cidxtid - parse @cidxtid field
+ * @cid: store CID value here
+ * @tid: store TID value here
+ *
+ * @cidxtid field encoded as bits 0..3 - CID; 4..7 - TID
+ */
+static inline void parse_cidxtid(u8 cidxtid, u8 *cid, u8 *tid)
+{
+	*cid = cidxtid & 0xf;
+	*tid = (cidxtid >> 4) & 0xf;
+}
+
 struct wil6210_mbox_ring {
 	u32 base;
 	u16 entry_size; /* max. size of mbox entry, incl. all headers */
-- 
cgit v1.2.2


From e58c9f7043d9b85f867b361d0fa82451ddcf9846 Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Mon, 17 Mar 2014 15:34:06 +0200
Subject: wil6210: Block data till "data port open" reported

When connection established, as reported by WMI_CONNECT_EVENTID,
4-way handshaking required for the secure connection is not done
yet. It is indicated by another WMI event. Wait for it and only then
allow data traffic. In case of non-secure connection, FW reports
"data port open" immediately after connection.

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wil6210/debugfs.c |  3 ++-
 drivers/net/wireless/ath/wil6210/main.c    |  1 +
 drivers/net/wireless/ath/wil6210/txrx.c    | 21 ++++++++++++++++++---
 drivers/net/wireless/ath/wil6210/wil6210.h |  1 +
 drivers/net/wireless/ath/wil6210/wmi.c     | 18 ++++++++++++++++--
 5 files changed, 38 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/wil6210/debugfs.c b/drivers/net/wireless/ath/wil6210/debugfs.c
index 1d09a4b0a0f4..ea868bea9e2e 100644
--- a/drivers/net/wireless/ath/wil6210/debugfs.c
+++ b/drivers/net/wireless/ath/wil6210/debugfs.c
@@ -631,7 +631,8 @@ static int wil_sta_debugfs_show(struct seq_file *s, void *data)
 			status = "connected";
 			break;
 		}
-		seq_printf(s, "[%d] %pM %s\n", i, p->addr, status);
+		seq_printf(s, "[%d] %pM %s%s\n", i, p->addr, status,
+			   (p->data_port_open ? " data_port_open" : ""));
 
 		if (p->status == wil_sta_connected) {
 			for (tid = 0; tid < WIL_STA_TID_NUM; tid++) {
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index 41c362dee032..f10a0b2a99b2 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -59,6 +59,7 @@ static void wil_disconnect_cid(struct wil6210_priv *wil, int cid)
 	uint i;
 	struct wil_sta_info *sta = &wil->sta[cid];
 
+	sta->data_port_open = false;
 	if (sta->status != wil_sta_unused) {
 		wmi_disconnect_sta(wil, sta->addr, WLAN_REASON_DEAUTH_LEAVING);
 		sta->status = wil_sta_unused;
diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index 7afaa5e5c42e..29f13e01b99e 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -662,6 +662,10 @@ static struct vring *wil_find_tx_vring(struct wil6210_priv *wil,
 	if (cid < 0)
 		return NULL;
 
+	if (!wil->sta[cid].data_port_open &&
+	    (skb->protocol != cpu_to_be16(ETH_P_PAE)))
+		return NULL;
+
 	/* TODO: fix for multiple TID */
 	for (i = 0; i < ARRAY_SIZE(wil->vring2cid_tid); i++) {
 		if (wil->vring2cid_tid[i][0] == cid) {
@@ -700,12 +704,19 @@ static struct vring *wil_tx_bcast(struct wil6210_priv *wil,
 	struct vring *v, *v2;
 	struct sk_buff *skb2;
 	int i;
+	u8 cid;
 
-	/* find 1-st vring */
+	/* find 1-st vring eligible for data */
 	for (i = 0; i < WIL6210_MAX_TX_RINGS; i++) {
 		v = &wil->vring_tx[i];
-		if (v->va)
-			goto found;
+		if (!v->va)
+			continue;
+
+		cid = wil->vring2cid_tid[i][0];
+		if (!wil->sta[cid].data_port_open)
+			continue;
+
+		goto found;
 	}
 
 	wil_err(wil, "Tx while no vrings active?\n");
@@ -721,6 +732,10 @@ found:
 		v2 = &wil->vring_tx[i];
 		if (!v2->va)
 			continue;
+		cid = wil->vring2cid_tid[i][0];
+		if (!wil->sta[cid].data_port_open)
+			continue;
+
 		skb2 = skb_copy(skb, GFP_ATOMIC);
 		if (skb2) {
 			wil_dbg_txrx(wil, "BCAST DUP -> ring %d\n", i);
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index 273d00f86130..f06f71756996 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -321,6 +321,7 @@ struct wil_sta_info {
 	u8 addr[ETH_ALEN];
 	enum wil_sta_status status;
 	struct wil_net_stats stats;
+	bool data_port_open; /* can send any data, not only EAPOL */
 	/* Rx BACK */
 	struct wil_tid_ampdu_rx *tid_rx[WIL_STA_TID_NUM];
 	unsigned long tid_rx_timer_expired[BITS_TO_LONGS(WIL_STA_TID_NUM)];
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index 24eed0963581..58c3afcf839d 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -550,9 +550,16 @@ static void wmi_evt_linkup(struct wil6210_priv *wil, int id, void *d, int len)
 {
 	struct net_device *ndev = wil_to_ndev(wil);
 	struct wmi_data_port_open_event *evt = d;
+	u8 cid = evt->cid;
 
-	wil_dbg_wmi(wil, "Link UP for CID %d\n", evt->cid);
+	wil_dbg_wmi(wil, "Link UP for CID %d\n", cid);
 
+	if (cid >= ARRAY_SIZE(wil->sta)) {
+		wil_err(wil, "Link UP for invalid CID %d\n", cid);
+		return;
+	}
+
+	wil->sta[cid].data_port_open = true;
 	netif_carrier_on(ndev);
 }
 
@@ -560,10 +567,17 @@ static void wmi_evt_linkdown(struct wil6210_priv *wil, int id, void *d, int len)
 {
 	struct net_device *ndev = wil_to_ndev(wil);
 	struct wmi_wbe_link_down_event *evt = d;
+	u8 cid = evt->cid;
 
 	wil_dbg_wmi(wil, "Link DOWN for CID %d, reason %d\n",
-		    evt->cid, le32_to_cpu(evt->reason));
+		    cid, le32_to_cpu(evt->reason));
+
+	if (cid >= ARRAY_SIZE(wil->sta)) {
+		wil_err(wil, "Link DOWN for invalid CID %d\n", cid);
+		return;
+	}
 
+	wil->sta[cid].data_port_open = false;
 	netif_carrier_off(ndev);
 }
 
-- 
cgit v1.2.2


From e83eb2fcae30aa8cc52e381c45fc161f877aa88d Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Mon, 17 Mar 2014 15:34:07 +0200
Subject: wil6210: enable scan while connected

New firmware do support scan while connected. Enable it.

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wil6210/cfg80211.c | 8 ++------
 drivers/net/wireless/ath/wil6210/main.c     | 2 --
 2 files changed, 2 insertions(+), 8 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index 743930357061..b1bc00724cd2 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -282,7 +282,7 @@ static int wil_cfg80211_scan(struct wiphy *wiphy,
 
 	/* FW don't support scan after connection attempt */
 	if (test_bit(wil_status_dontscan, &wil->status)) {
-		wil_err(wil, "Scan after connect attempt not supported\n");
+		wil_err(wil, "Can't scan now\n");
 		return -EBUSY;
 	}
 
@@ -402,10 +402,7 @@ static int wil_cfg80211_connect(struct wiphy *wiphy,
 
 	memcpy(conn.bssid, bss->bssid, ETH_ALEN);
 	memcpy(conn.dst_mac, bss->bssid, ETH_ALEN);
-	/*
-	 * FW don't support scan after connection attempt
-	 */
-	set_bit(wil_status_dontscan, &wil->status);
+
 	set_bit(wil_status_fwconnecting, &wil->status);
 
 	rc = wmi_send(wil, WMI_CONNECT_CMDID, &conn, sizeof(conn));
@@ -414,7 +411,6 @@ static int wil_cfg80211_connect(struct wiphy *wiphy,
 		mod_timer(&wil->connect_timer,
 			  jiffies + msecs_to_jiffies(2000));
 	} else {
-		clear_bit(wil_status_dontscan, &wil->status);
 		clear_bit(wil_status_fwconnecting, &wil->status);
 	}
 
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index f10a0b2a99b2..4cc1b789bd1c 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -113,8 +113,6 @@ static void _wil6210_disconnect(struct wil6210_priv *wil, void *bssid)
 						GFP_KERNEL);
 		}
 		clear_bit(wil_status_fwconnecting, &wil->status);
-		wil_dbg_misc(wil, "clear_bit(wil_status_dontscan)\n");
-		clear_bit(wil_status_dontscan, &wil->status);
 		break;
 	default:
 		/* AP-like interface and monitor:
-- 
cgit v1.2.2


From c236658f1434a1e00ec1fec9054964bcaf3ddde7 Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Mon, 17 Mar 2014 15:34:08 +0200
Subject: wil6210: add scatter-gather support

When setting fragmented skb for Tx, assign skb to the last descriptor
and set number of fragments in the 1-st one
On Tx complete, HW sets "DU" bit in Tx descriptor only for the last
descriptor; so search for it using number of fragments field.
Middle descriptors may have "DU" bit not set by the hardware.

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wil6210/debugfs.c |  61 ++++++++++-----
 drivers/net/wireless/ath/wil6210/netdev.c  |   5 +-
 drivers/net/wireless/ath/wil6210/txrx.c    | 115 ++++++++++++++++++-----------
 drivers/net/wireless/ath/wil6210/wil6210.h |   1 +
 4 files changed, 115 insertions(+), 67 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/wil6210/debugfs.c b/drivers/net/wireless/ath/wil6210/debugfs.c
index ea868bea9e2e..ecdabe4adec3 100644
--- a/drivers/net/wireless/ath/wil6210/debugfs.c
+++ b/drivers/net/wireless/ath/wil6210/debugfs.c
@@ -398,6 +398,44 @@ static const struct file_operations fops_reset = {
 	.open  = simple_open,
 };
 
+static void wil_seq_hexdump(struct seq_file *s, void *p, int len,
+			    const char *prefix)
+{
+	char printbuf[16 * 3 + 2];
+	int i = 0;
+	while (i < len) {
+		int l = min(len - i, 16);
+		hex_dump_to_buffer(p + i, l, 16, 1, printbuf,
+				   sizeof(printbuf), false);
+		seq_printf(s, "%s%s\n", prefix, printbuf);
+		i += l;
+	}
+}
+
+static void wil_seq_print_skb(struct seq_file *s, struct sk_buff *skb)
+{
+	int i = 0;
+	int len = skb_headlen(skb);
+	void *p = skb->data;
+	int nr_frags = skb_shinfo(skb)->nr_frags;
+
+	seq_printf(s, "    len = %d\n", len);
+	wil_seq_hexdump(s, p, len, "      : ");
+
+	if (nr_frags) {
+		seq_printf(s, "    nr_frags = %d\n", nr_frags);
+		for (i = 0; i < nr_frags; i++) {
+			const struct skb_frag_struct *frag =
+					&skb_shinfo(skb)->frags[i];
+
+			len = skb_frag_size(frag);
+			p = skb_frag_address_safe(frag);
+			seq_printf(s, "    [%2d] : len = %d\n", i, len);
+			wil_seq_hexdump(s, p, len, "      : ");
+		}
+	}
+}
+
 /*---------Tx/Rx descriptor------------*/
 static int wil_txdesc_debugfs_show(struct seq_file *s, void *data)
 {
@@ -438,26 +476,9 @@ static int wil_txdesc_debugfs_show(struct seq_file *s, void *data)
 		seq_printf(s, "  SKB = %p\n", skb);
 
 		if (skb) {
-			char printbuf[16 * 3 + 2];
-			int i = 0;
-			int len = le16_to_cpu(d->dma.length);
-			void *p = skb->data;
-
-			if (len != skb_headlen(skb)) {
-				seq_printf(s, "!!! len: desc = %d skb = %d\n",
-					   len, skb_headlen(skb));
-				len = min_t(int, len, skb_headlen(skb));
-			}
-
-			seq_printf(s, "    len = %d\n", len);
-
-			while (i < len) {
-				int l = min(len - i, 16);
-				hex_dump_to_buffer(p + i, l, 16, 1, printbuf,
-						   sizeof(printbuf), false);
-				seq_printf(s, "      : %s\n", printbuf);
-				i += l;
-			}
+			skb_get(skb);
+			wil_seq_print_skb(s, skb);
+			kfree_skb(skb);
 		}
 		seq_printf(s, "}\n");
 	} else {
diff --git a/drivers/net/wireless/ath/wil6210/netdev.c b/drivers/net/wireless/ath/wil6210/netdev.c
index 717178f09aa8..5991802a6701 100644
--- a/drivers/net/wireless/ath/wil6210/netdev.c
+++ b/drivers/net/wireless/ath/wil6210/netdev.c
@@ -127,8 +127,9 @@ void *wil_if_alloc(struct device *dev, void __iomem *csr)
 
 	ndev->netdev_ops = &wil_netdev_ops;
 	ndev->ieee80211_ptr = wdev;
-	ndev->hw_features = NETIF_F_HW_CSUM | NETIF_F_RXCSUM;
-	ndev->features |= NETIF_F_HW_CSUM | NETIF_F_RXCSUM;
+	ndev->hw_features = NETIF_F_HW_CSUM | NETIF_F_RXCSUM |
+			    NETIF_F_SG;
+	ndev->features |= ndev->hw_features;
 	SET_NETDEV_DEV(ndev, wiphy_dev(wdev->wiphy));
 	wdev->netdev = ndev;
 
diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index 29f13e01b99e..2eb545e3981f 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -774,6 +774,13 @@ static int wil_tx_desc_map(struct vring_tx_desc *d, dma_addr_t pa, u32 len,
 	return 0;
 }
 
+static inline
+void wil_tx_desc_set_nr_frags(struct vring_tx_desc *d, int nr_frags)
+{
+	d->mac.d[2] |= ((nr_frags + 1) <<
+		       MAC_CFG_DESC_TX_2_NUM_OF_DESCRIPTORS_POS);
+}
+
 static int wil_tx_desc_offload_cksum_set(struct wil6210_priv *wil,
 				struct vring_tx_desc *d,
 				struct sk_buff *skb)
@@ -866,8 +873,8 @@ static int wil_tx_vring(struct wil6210_priv *wil, struct vring *vring,
 		goto dma_error;
 	}
 
-	d->mac.d[2] |= ((nr_frags + 1) <<
-		       MAC_CFG_DESC_TX_2_NUM_OF_DESCRIPTORS_POS);
+	vring->ctx[i].nr_frags = nr_frags;
+	wil_tx_desc_set_nr_frags(d, nr_frags);
 	if (nr_frags)
 		*_d = *d;
 
@@ -883,6 +890,11 @@ static int wil_tx_vring(struct wil6210_priv *wil, struct vring *vring,
 		if (unlikely(dma_mapping_error(dev, pa)))
 			goto dma_error;
 		wil_tx_desc_map(d, pa, len, vring_index);
+		/* no need to check return code -
+		 * if it succeeded for 1-st descriptor,
+		 * it will succeed here too
+		 */
+		wil_tx_desc_offload_cksum_set(wil, d, skb);
 		vring->ctx[i].mapped_as_page = 1;
 		*_d = *d;
 	}
@@ -1003,6 +1015,7 @@ int wil_tx_complete(struct wil6210_priv *wil, int ringid)
 	int done = 0;
 	int cid = wil->vring2cid_tid[ringid][0];
 	struct wil_net_stats *stats = &wil->sta[cid].stats;
+	volatile struct vring_tx_desc *_d;
 
 	if (!vring->va) {
 		wil_err(wil, "Tx irq[%d]: vring not initialized\n", ringid);
@@ -1012,57 +1025,69 @@ int wil_tx_complete(struct wil6210_priv *wil, int ringid)
 	wil_dbg_txrx(wil, "%s(%d)\n", __func__, ringid);
 
 	while (!wil_vring_is_empty(vring)) {
-		volatile struct vring_tx_desc *_d =
-					      &vring->va[vring->swtail].tx;
-		struct vring_tx_desc dd, *d = &dd;
-		dma_addr_t pa;
-		u16 dmalen;
+		int new_swtail;
 		struct wil_ctx *ctx = &vring->ctx[vring->swtail];
-		struct sk_buff *skb = ctx->skb;
-
-		*d = *_d;
+		/**
+		 * For the fragmented skb, HW will set DU bit only for the
+		 * last fragment. look for it
+		 */
+		int lf = (vring->swtail + ctx->nr_frags) % vring->size;
+		/* TODO: check we are not past head */
 
-		if (!(d->dma.status & TX_DMA_STATUS_DU))
+		_d = &vring->va[lf].tx;
+		if (!(_d->dma.status & TX_DMA_STATUS_DU))
 			break;
 
-		dmalen = le16_to_cpu(d->dma.length);
-		trace_wil6210_tx_done(ringid, vring->swtail, dmalen,
-				      d->dma.error);
-		wil_dbg_txrx(wil,
-			     "Tx[%3d] : %d bytes, status 0x%02x err 0x%02x\n",
-			     vring->swtail, dmalen, d->dma.status,
-			     d->dma.error);
-		wil_hex_dump_txrx("TxC ", DUMP_PREFIX_NONE, 32, 4,
-				  (const void *)d, sizeof(*d), false);
+		new_swtail = (lf + 1) % vring->size;
+		while (vring->swtail != new_swtail) {
+			struct vring_tx_desc dd, *d = &dd;
+			dma_addr_t pa;
+			u16 dmalen;
+			struct wil_ctx *ctx = &vring->ctx[vring->swtail];
+			struct sk_buff *skb = ctx->skb;
+			_d = &vring->va[vring->swtail].tx;
 
-		pa = wil_desc_addr(&d->dma.addr);
-		if (ctx->mapped_as_page)
-			dma_unmap_page(dev, pa, dmalen, DMA_TO_DEVICE);
-		else
-			dma_unmap_single(dev, pa, dmalen, DMA_TO_DEVICE);
+			*d = *_d;
 
-		if (skb) {
-			if (d->dma.error == 0) {
-				ndev->stats.tx_packets++;
-				stats->tx_packets++;
-				ndev->stats.tx_bytes += skb->len;
-				stats->tx_bytes += skb->len;
-			} else {
-				ndev->stats.tx_errors++;
-				stats->tx_errors++;
-			}
+			dmalen = le16_to_cpu(d->dma.length);
+			trace_wil6210_tx_done(ringid, vring->swtail, dmalen,
+					      d->dma.error);
+			wil_dbg_txrx(wil,
+				     "Tx[%3d] : %d bytes, status 0x%02x err 0x%02x\n",
+				     vring->swtail, dmalen, d->dma.status,
+				     d->dma.error);
+			wil_hex_dump_txrx("TxC ", DUMP_PREFIX_NONE, 32, 4,
+					  (const void *)d, sizeof(*d), false);
 
-			dev_kfree_skb_any(skb);
+			pa = wil_desc_addr(&d->dma.addr);
+			if (ctx->mapped_as_page)
+				dma_unmap_page(dev, pa, dmalen, DMA_TO_DEVICE);
+			else
+				dma_unmap_single(dev, pa, dmalen,
+						 DMA_TO_DEVICE);
+
+			if (skb) {
+				if (d->dma.error == 0) {
+					ndev->stats.tx_packets++;
+					stats->tx_packets++;
+					ndev->stats.tx_bytes += skb->len;
+					stats->tx_bytes += skb->len;
+				} else {
+					ndev->stats.tx_errors++;
+					stats->tx_errors++;
+				}
+
+				dev_kfree_skb_any(skb);
+			}
+			memset(ctx, 0, sizeof(*ctx));
+			/* There is no need to touch HW descriptor:
+			 * - ststus bit TX_DMA_STATUS_DU is set by design,
+			 *   so hardware will not try to process this desc.,
+			 * - rest of descriptor will be initialized on Tx.
+			 */
+			vring->swtail = wil_vring_next_tail(vring);
+			done++;
 		}
-		memset(ctx, 0, sizeof(*ctx));
-		/*
-		 * There is no need to touch HW descriptor:
-		 * - ststus bit TX_DMA_STATUS_DU is set by design,
-		 *   so hardware will not try to process this desc.,
-		 * - rest of descriptor will be initialized on Tx.
-		 */
-		vring->swtail = wil_vring_next_tail(vring);
-		done++;
 	}
 	if (wil_vring_avail_tx(vring) > vring->size/4)
 		netif_tx_wake_all_queues(wil_to_ndev(wil));
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index f06f71756996..574f4d9af18b 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -214,6 +214,7 @@ struct pending_wmi_event {
  */
 struct wil_ctx {
 	struct sk_buff *skb;
+	u8 nr_frags;
 	u8 mapped_as_page:1;
 };
 
-- 
cgit v1.2.2


From 2232abd59ae5801b20c1e8269a63515bac50d28d Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Mon, 17 Mar 2014 15:34:09 +0200
Subject: wil6210: generalize tx desc mapping

Introduce enum to describe mapping type; allow 'none' in addition to
'single' and 'page'; this is preparation for GSO

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wil6210/txrx.c    | 52 +++++++++++++++---------------
 drivers/net/wireless/ath/wil6210/wil6210.h |  8 ++++-
 2 files changed, 33 insertions(+), 27 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index 2eb545e3981f..41f88ee49bca 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -104,6 +104,23 @@ static int wil_vring_alloc(struct wil6210_priv *wil, struct vring *vring)
 	return 0;
 }
 
+static void wil_txdesc_unmap(struct device *dev, struct vring_tx_desc *d,
+			     struct wil_ctx *ctx)
+{
+	dma_addr_t pa = wil_desc_addr(&d->dma.addr);
+	u16 dmalen = le16_to_cpu(d->dma.length);
+	switch (ctx->mapped_as) {
+	case wil_mapped_as_single:
+		dma_unmap_single(dev, pa, dmalen, DMA_TO_DEVICE);
+		break;
+	case wil_mapped_as_page:
+		dma_unmap_page(dev, pa, dmalen, DMA_TO_DEVICE);
+		break;
+	default:
+		break;
+	}
+}
+
 static void wil_vring_free(struct wil6210_priv *wil, struct vring *vring,
 			   int tx)
 {
@@ -122,15 +139,7 @@ static void wil_vring_free(struct wil6210_priv *wil, struct vring *vring,
 
 			ctx = &vring->ctx[vring->swtail];
 			*d = *_d;
-			pa = wil_desc_addr(&d->dma.addr);
-			dmalen = le16_to_cpu(d->dma.length);
-			if (vring->ctx[vring->swtail].mapped_as_page) {
-				dma_unmap_page(dev, pa, dmalen,
-					       DMA_TO_DEVICE);
-			} else {
-				dma_unmap_single(dev, pa, dmalen,
-						 DMA_TO_DEVICE);
-			}
+			wil_txdesc_unmap(dev, d, ctx);
 			if (ctx->skb)
 				dev_kfree_skb_any(ctx->skb);
 			vring->swtail = wil_vring_next_tail(vring);
@@ -845,8 +854,6 @@ static int wil_tx_vring(struct wil6210_priv *wil, struct vring *vring,
 
 	wil_dbg_txrx(wil, "%s()\n", __func__);
 
-	if (avail < vring->size/8)
-		netif_tx_stop_all_queues(wil_to_ndev(wil));
 	if (avail < 1 + nr_frags) {
 		wil_err(wil, "Tx ring full. No space for %d fragments\n",
 			1 + nr_frags);
@@ -864,6 +871,7 @@ static int wil_tx_vring(struct wil6210_priv *wil, struct vring *vring,
 
 	if (unlikely(dma_mapping_error(dev, pa)))
 		return -EINVAL;
+	vring->ctx[i].mapped_as = wil_mapped_as_single;
 	/* 1-st segment */
 	wil_tx_desc_map(d, pa, skb_headlen(skb), vring_index);
 	/* Process TCP/UDP checksum offloading */
@@ -889,13 +897,13 @@ static int wil_tx_vring(struct wil6210_priv *wil, struct vring *vring,
 				DMA_TO_DEVICE);
 		if (unlikely(dma_mapping_error(dev, pa)))
 			goto dma_error;
+		vring->ctx[i].mapped_as = wil_mapped_as_page;
 		wil_tx_desc_map(d, pa, len, vring_index);
 		/* no need to check return code -
 		 * if it succeeded for 1-st descriptor,
 		 * it will succeed here too
 		 */
 		wil_tx_desc_offload_cksum_set(wil, d, skb);
-		vring->ctx[i].mapped_as_page = 1;
 		*_d = *d;
 	}
 	/* for the last seg only */
@@ -924,7 +932,6 @@ static int wil_tx_vring(struct wil6210_priv *wil, struct vring *vring,
 	/* unmap what we have mapped */
 	nr_frags = f + 1; /* frags mapped + one for skb head */
 	for (f = 0; f < nr_frags; f++) {
-		u16 dmalen;
 		struct wil_ctx *ctx;
 
 		i = (swhead + f) % vring->size;
@@ -932,12 +939,7 @@ static int wil_tx_vring(struct wil6210_priv *wil, struct vring *vring,
 		_d = &(vring->va[i].tx);
 		*d = *_d;
 		_d->dma.status = TX_DMA_STATUS_DU;
-		pa = wil_desc_addr(&d->dma.addr);
-		dmalen = le16_to_cpu(d->dma.length);
-		if (ctx->mapped_as_page)
-			dma_unmap_page(dev, pa, dmalen, DMA_TO_DEVICE);
-		else
-			dma_unmap_single(dev, pa, dmalen, DMA_TO_DEVICE);
+		wil_txdesc_unmap(dev, d, ctx);
 
 		if (ctx->skb)
 			dev_kfree_skb_any(ctx->skb);
@@ -983,6 +985,10 @@ netdev_tx_t wil_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 	/* set up vring entry */
 	rc = wil_tx_vring(wil, vring, skb);
 
+	/* do we still have enough room in the vring? */
+	if (wil_vring_avail_tx(vring) < vring->size/8)
+		netif_tx_stop_all_queues(wil_to_ndev(wil));
+
 	switch (rc) {
 	case 0:
 		/* statistics will be updated on the tx_complete */
@@ -1041,7 +1047,6 @@ int wil_tx_complete(struct wil6210_priv *wil, int ringid)
 		new_swtail = (lf + 1) % vring->size;
 		while (vring->swtail != new_swtail) {
 			struct vring_tx_desc dd, *d = &dd;
-			dma_addr_t pa;
 			u16 dmalen;
 			struct wil_ctx *ctx = &vring->ctx[vring->swtail];
 			struct sk_buff *skb = ctx->skb;
@@ -1059,12 +1064,7 @@ int wil_tx_complete(struct wil6210_priv *wil, int ringid)
 			wil_hex_dump_txrx("TxC ", DUMP_PREFIX_NONE, 32, 4,
 					  (const void *)d, sizeof(*d), false);
 
-			pa = wil_desc_addr(&d->dma.addr);
-			if (ctx->mapped_as_page)
-				dma_unmap_page(dev, pa, dmalen, DMA_TO_DEVICE);
-			else
-				dma_unmap_single(dev, pa, dmalen,
-						 DMA_TO_DEVICE);
+			wil_txdesc_unmap(dev, d, ctx);
 
 			if (skb) {
 				if (d->dma.error == 0) {
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index 574f4d9af18b..11e0898bcffd 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -209,13 +209,19 @@ struct pending_wmi_event {
 	} __packed event;
 };
 
+enum { /* for wil_ctx.mapped_as */
+	wil_mapped_as_none = 0,
+	wil_mapped_as_single = 1,
+	wil_mapped_as_page = 2,
+};
+
 /**
  * struct wil_ctx - software context for Vring descriptor
  */
 struct wil_ctx {
 	struct sk_buff *skb;
 	u8 nr_frags;
-	u8 mapped_as_page:1;
+	u8 mapped_as;
 };
 
 union vring_desc;
-- 
cgit v1.2.2


From 36b10a7239ce0d384a54ab1053d83b3bbb26501b Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Mon, 17 Mar 2014 15:34:10 +0200
Subject: wil6210: update target reset to support new HW

Support for new chip revision. Revision read from the
internal register, PCIE config's "revision id" register
do not indicate HW version properly

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wil6210/main.c     | 29 ++++++++++++++++++++++++++++-
 drivers/net/wireless/ath/wil6210/pcie_bus.c |  2 ++
 drivers/net/wireless/ath/wil6210/wil6210.h  |  4 ++++
 3 files changed, 34 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index 4cc1b789bd1c..86444189a2ec 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -230,14 +230,22 @@ void wil_priv_deinit(struct wil6210_priv *wil)
 
 static void wil_target_reset(struct wil6210_priv *wil)
 {
+	int delay = 100;
+	u32 baud_rate;
+	u32 rev_id;
+
 	wil_dbg_misc(wil, "Resetting...\n");
 
+	/* register read */
+#define R(a) ioread32(wil->csr + HOSTADDR(a))
 	/* register write */
 #define W(a, v) iowrite32(v, wil->csr + HOSTADDR(a))
 	/* register set = read, OR, write */
 #define S(a, v) iowrite32(ioread32(wil->csr + HOSTADDR(a)) | v, \
 		wil->csr + HOSTADDR(a))
 
+	wil->hw_version = R(RGF_FW_REV_ID);
+	rev_id = wil->hw_version & 0xff;
 	/* hpal_perst_from_pad_src_n_mask */
 	S(RGF_USER_CLKS_CTL_SW_RST_MASK_0, BIT(6));
 	/* car_perst_rst_src_n_mask */
@@ -257,11 +265,30 @@ static void wil_target_reset(struct wil6210_priv *wil)
 	W(RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0);
 
 	W(RGF_USER_CLKS_CTL_SW_RST_VEC_3, 0x00000001);
-	W(RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0x00000080);
+	if (rev_id == 1) {
+		W(RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0x00000080);
+	} else {
+		W(RGF_LOS_COUNTER_CTL, BIT(6) | BIT(8));
+		W(RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0x00008000);
+	}
 	W(RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0);
 
+	/* wait until device ready. Use baud rate */
+	do {
+		msleep(1);
+		baud_rate = R(RGF_USER_SERIAL_BAUD_RATE);
+		if (delay-- < 0) {
+			wil_err(wil, "Reset not completed\n");
+			return;
+		}
+	} while (baud_rate != 0x15e);
+
+	if (rev_id == 2)
+		W(RGF_LOS_COUNTER_CTL, BIT(8));
+
 	wil_dbg_misc(wil, "Reset completed\n");
 
+#undef R
 #undef W
 #undef S
 }
diff --git a/drivers/net/wireless/ath/wil6210/pcie_bus.c b/drivers/net/wireless/ath/wil6210/pcie_bus.c
index eeceab39cda2..d96e81131132 100644
--- a/drivers/net/wireless/ath/wil6210/pcie_bus.c
+++ b/drivers/net/wireless/ath/wil6210/pcie_bus.c
@@ -74,6 +74,8 @@ static int wil_if_pcie_enable(struct wil6210_priv *wil)
 	if (rc)
 		goto release_irq;
 
+	wil_info(wil, "HW version: 0x%08x\n", wil->hw_version);
+
 	return 0;
 
  release_irq:
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index 11e0898bcffd..14f861cd295d 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -74,6 +74,9 @@ struct RGF_ICR {
 } __packed;
 
 /* registers - FW addresses */
+#define RGF_FW_REV_ID			(0x880a8c) /* chip revision */
+#define RGF_USER_SERIAL_BAUD_RATE	(0x880050)
+#define RGF_LOS_COUNTER_CTL		(0x882dc4)
 #define RGF_USER_USER_SCRATCH_PAD	(0x8802bc)
 #define RGF_USER_USER_ICR		(0x880b4c) /* struct RGF_ICR */
 	#define BIT_USER_USER_ICR_SW_INT_2	BIT(18)
@@ -342,6 +345,7 @@ struct wil6210_priv {
 	void __iomem *csr;
 	ulong status;
 	u32 fw_version;
+	u32 hw_version;
 	u8 n_mids; /* number of additional MIDs as reported by FW */
 	/* profile */
 	u32 monitor_flags;
-- 
cgit v1.2.2


From aa27deaabfa0c4a08cdb4d3209a13ab02695c186 Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Mon, 17 Mar 2014 15:34:11 +0200
Subject: wil6210: reduce dmesg pollution after FW crash

When FW crashes, dmesg get polluted with the "FW not ready"
error message. Print it only once per FW lifecycle

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wil6210/txrx.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index 41f88ee49bca..5cda0ea9925f 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -956,11 +956,15 @@ netdev_tx_t wil_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 	struct wil6210_priv *wil = ndev_to_wil(ndev);
 	struct ethhdr *eth = (void *)skb->data;
 	struct vring *vring;
+	static bool pr_once_fw;
 	int rc;
 
 	wil_dbg_txrx(wil, "%s()\n", __func__);
 	if (!test_bit(wil_status_fwready, &wil->status)) {
-		wil_err(wil, "FW not ready\n");
+		if (!pr_once_fw) {
+			wil_err(wil, "FW not ready\n");
+			pr_once_fw = true;
+		}
 		goto drop;
 	}
 	if (!test_bit(wil_status_fwconnected, &wil->status)) {
@@ -971,6 +975,7 @@ netdev_tx_t wil_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 		wil_err(wil, "Xmit in monitor mode not supported\n");
 		goto drop;
 	}
+	pr_once_fw = false;
 
 	/* find vring */
 	if (is_unicast_ether_addr(eth->h_dest)) {
-- 
cgit v1.2.2


From 98a65b59f8109cfafcc3c13b34895087b90dc630 Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Mon, 17 Mar 2014 15:34:12 +0200
Subject: wil6210: report reset time

Useful to detect hardware problems

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wil6210/main.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index 86444189a2ec..1f9f1d268eda 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -230,7 +230,7 @@ void wil_priv_deinit(struct wil6210_priv *wil)
 
 static void wil_target_reset(struct wil6210_priv *wil)
 {
-	int delay = 100;
+	int delay = 0;
 	u32 baud_rate;
 	u32 rev_id;
 
@@ -277,7 +277,7 @@ static void wil_target_reset(struct wil6210_priv *wil)
 	do {
 		msleep(1);
 		baud_rate = R(RGF_USER_SERIAL_BAUD_RATE);
-		if (delay-- < 0) {
+		if (delay++ > 100) {
 			wil_err(wil, "Reset not completed\n");
 			return;
 		}
@@ -286,7 +286,7 @@ static void wil_target_reset(struct wil6210_priv *wil)
 	if (rev_id == 2)
 		W(RGF_LOS_COUNTER_CTL, BIT(8));
 
-	wil_dbg_misc(wil, "Reset completed\n");
+	wil_dbg_misc(wil, "Reset completed in %d ms\n", delay);
 
 #undef R
 #undef W
-- 
cgit v1.2.2


From f4b5a8032d513a11ef919305048f00e812605318 Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Mon, 17 Mar 2014 15:34:13 +0200
Subject: wil6210: fix for HW bug in interrupt setup logic

Hardware bug triggered by the MSI init while INTx asserted for some reason.
De-assert INTx prior to MSI set-up

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wil6210/interrupt.c | 17 +++++++++++++++++
 drivers/net/wireless/ath/wil6210/pcie_bus.c  |  1 +
 drivers/net/wireless/ath/wil6210/wil6210.h   |  1 +
 3 files changed, 19 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/wil6210/interrupt.c b/drivers/net/wireless/ath/wil6210/interrupt.c
index 10919f95a83c..52c40e1d593a 100644
--- a/drivers/net/wireless/ath/wil6210/interrupt.c
+++ b/drivers/net/wireless/ath/wil6210/interrupt.c
@@ -493,6 +493,23 @@ free0:
 
 	return rc;
 }
+/* can't use wil_ioread32_and_clear because ICC value is not ser yet */
+static inline void wil_clear32(void __iomem *addr)
+{
+	u32 x = ioread32(addr);
+
+	iowrite32(x, addr);
+}
+
+void wil6210_clear_irq(struct wil6210_priv *wil)
+{
+	wil_clear32(wil->csr + HOSTADDR(RGF_DMA_EP_RX_ICR) +
+		    offsetof(struct RGF_ICR, ICR));
+	wil_clear32(wil->csr + HOSTADDR(RGF_DMA_EP_TX_ICR) +
+		    offsetof(struct RGF_ICR, ICR));
+	wil_clear32(wil->csr + HOSTADDR(RGF_DMA_EP_MISC_ICR) +
+		    offsetof(struct RGF_ICR, ICR));
+}
 
 int wil6210_init_irq(struct wil6210_priv *wil, int irq)
 {
diff --git a/drivers/net/wireless/ath/wil6210/pcie_bus.c b/drivers/net/wireless/ath/wil6210/pcie_bus.c
index d96e81131132..c60976144db3 100644
--- a/drivers/net/wireless/ath/wil6210/pcie_bus.c
+++ b/drivers/net/wireless/ath/wil6210/pcie_bus.c
@@ -153,6 +153,7 @@ static int wil_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	pci_set_drvdata(pdev, wil);
 	wil->pdev = pdev;
 
+	wil6210_clear_irq(wil);
 	/* FW should raise IRQ when ready */
 	rc = wil_if_pcie_enable(wil);
 	if (rc) {
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index 14f861cd295d..317621c49bf8 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -476,6 +476,7 @@ int wmi_rxon(struct wil6210_priv *wil, bool on);
 int wmi_get_temperature(struct wil6210_priv *wil, u32 *t_m, u32 *t_r);
 int wmi_disconnect_sta(struct wil6210_priv *wil, const u8 *mac, u16 reason);
 
+void wil6210_clear_irq(struct wil6210_priv *wil);
 int wil6210_init_irq(struct wil6210_priv *wil, int irq);
 void wil6210_fini_irq(struct wil6210_priv *wil, int irq);
 void wil6210_disable_irq(struct wil6210_priv *wil);
-- 
cgit v1.2.2


From 171239912187fd6262c1bb40ff74ff2b4505938b Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Mon, 17 Mar 2014 15:34:14 +0200
Subject: wil6210: sort HW registers definitions

Put all registers in order for easier navigation;
fix naming to reflect hardware cluster

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wil6210/main.c    |  6 +++---
 drivers/net/wireless/ath/wil6210/wil6210.h | 31 +++++++++++++++---------------
 2 files changed, 19 insertions(+), 18 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index 1f9f1d268eda..bd27bee8241f 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -244,7 +244,7 @@ static void wil_target_reset(struct wil6210_priv *wil)
 #define S(a, v) iowrite32(ioread32(wil->csr + HOSTADDR(a)) | v, \
 		wil->csr + HOSTADDR(a))
 
-	wil->hw_version = R(RGF_FW_REV_ID);
+	wil->hw_version = R(RGF_USER_FW_REV_ID);
 	rev_id = wil->hw_version & 0xff;
 	/* hpal_perst_from_pad_src_n_mask */
 	S(RGF_USER_CLKS_CTL_SW_RST_MASK_0, BIT(6));
@@ -268,7 +268,7 @@ static void wil_target_reset(struct wil6210_priv *wil)
 	if (rev_id == 1) {
 		W(RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0x00000080);
 	} else {
-		W(RGF_LOS_COUNTER_CTL, BIT(6) | BIT(8));
+		W(RGF_PCIE_LOS_COUNTER_CTL, BIT(6) | BIT(8));
 		W(RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0x00008000);
 	}
 	W(RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0);
@@ -284,7 +284,7 @@ static void wil_target_reset(struct wil6210_priv *wil)
 	} while (baud_rate != 0x15e);
 
 	if (rev_id == 2)
-		W(RGF_LOS_COUNTER_CTL, BIT(8));
+		W(RGF_PCIE_LOS_COUNTER_CTL, BIT(8));
 
 	wil_dbg_misc(wil, "Reset completed in %d ms\n", delay);
 
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index 317621c49bf8..b376399e68ca 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -74,26 +74,18 @@ struct RGF_ICR {
 } __packed;
 
 /* registers - FW addresses */
-#define RGF_FW_REV_ID			(0x880a8c) /* chip revision */
 #define RGF_USER_SERIAL_BAUD_RATE	(0x880050)
-#define RGF_LOS_COUNTER_CTL		(0x882dc4)
-#define RGF_USER_USER_SCRATCH_PAD	(0x8802bc)
-#define RGF_USER_USER_ICR		(0x880b4c) /* struct RGF_ICR */
-	#define BIT_USER_USER_ICR_SW_INT_2	BIT(18)
-#define RGF_USER_CLKS_CTL_SW_RST_MASK_0	(0x880b14)
-#define RGF_USER_MAC_CPU_0		(0x8801fc)
 #define RGF_USER_USER_CPU_0		(0x8801e0)
+#define RGF_USER_MAC_CPU_0		(0x8801fc)
+#define RGF_USER_USER_SCRATCH_PAD	(0x8802bc)
+#define RGF_USER_FW_REV_ID		(0x880a8c) /* chip revision */
 #define RGF_USER_CLKS_CTL_SW_RST_VEC_0	(0x880b04)
 #define RGF_USER_CLKS_CTL_SW_RST_VEC_1	(0x880b08)
 #define RGF_USER_CLKS_CTL_SW_RST_VEC_2	(0x880b0c)
 #define RGF_USER_CLKS_CTL_SW_RST_VEC_3	(0x880b10)
-
-#define RGF_DMA_PSEUDO_CAUSE		(0x881c68)
-#define RGF_DMA_PSEUDO_CAUSE_MASK_SW	(0x881c6c)
-#define RGF_DMA_PSEUDO_CAUSE_MASK_FW	(0x881c70)
-	#define BIT_DMA_PSEUDO_CAUSE_RX		BIT(0)
-	#define BIT_DMA_PSEUDO_CAUSE_TX		BIT(1)
-	#define BIT_DMA_PSEUDO_CAUSE_MISC	BIT(2)
+#define RGF_USER_CLKS_CTL_SW_RST_MASK_0	(0x880b14)
+#define RGF_USER_USER_ICR		(0x880b4c) /* struct RGF_ICR */
+	#define BIT_USER_USER_ICR_SW_INT_2	BIT(18)
 
 #define RGF_DMA_EP_TX_ICR		(0x881bb4) /* struct RGF_ICR */
 	#define BIT_DMA_EP_TX_ICR_TX_DONE	BIT(0)
@@ -108,13 +100,22 @@ struct RGF_ICR {
 /* Interrupt moderation control */
 #define RGF_DMA_ITR_CNT_TRSH		(0x881c5c)
 #define RGF_DMA_ITR_CNT_DATA		(0x881c60)
-#define RGF_DMA_ITR_CNT_CRL		(0x881C64)
+#define RGF_DMA_ITR_CNT_CRL		(0x881c64)
 	#define BIT_DMA_ITR_CNT_CRL_EN		BIT(0)
 	#define BIT_DMA_ITR_CNT_CRL_EXT_TICK	BIT(1)
 	#define BIT_DMA_ITR_CNT_CRL_FOREVER	BIT(2)
 	#define BIT_DMA_ITR_CNT_CRL_CLR		BIT(3)
 	#define BIT_DMA_ITR_CNT_CRL_REACH_TRSH	BIT(4)
 
+#define RGF_DMA_PSEUDO_CAUSE		(0x881c68)
+#define RGF_DMA_PSEUDO_CAUSE_MASK_SW	(0x881c6c)
+#define RGF_DMA_PSEUDO_CAUSE_MASK_FW	(0x881c70)
+	#define BIT_DMA_PSEUDO_CAUSE_RX		BIT(0)
+	#define BIT_DMA_PSEUDO_CAUSE_TX		BIT(1)
+	#define BIT_DMA_PSEUDO_CAUSE_MISC	BIT(2)
+
+#define RGF_PCIE_LOS_COUNTER_CTL	(0x882dc4)
+
 /* popular locations */
 #define HOST_MBOX   HOSTADDR(RGF_USER_USER_SCRATCH_PAD)
 #define HOST_SW_INT (HOSTADDR(RGF_USER_USER_ICR) + \
-- 
cgit v1.2.2


From 972072aa7992634ec642bf41679a53b7aa060dd1 Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Mon, 17 Mar 2014 15:34:15 +0200
Subject: wil6210: reset on power good

Configure hardware to perform full reset on "power good". This mean,
reset HW on system boot. This improves card stability.
By default this is off.

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wil6210/main.c    | 8 ++++++--
 drivers/net/wireless/ath/wil6210/wil6210.h | 2 ++
 2 files changed, 8 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index bd27bee8241f..684762203a62 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -241,8 +241,9 @@ static void wil_target_reset(struct wil6210_priv *wil)
 	/* register write */
 #define W(a, v) iowrite32(v, wil->csr + HOSTADDR(a))
 	/* register set = read, OR, write */
-#define S(a, v) iowrite32(ioread32(wil->csr + HOSTADDR(a)) | v, \
-		wil->csr + HOSTADDR(a))
+#define S(a, v) W(a, R(a) | v)
+	/* register clear = read, AND with inverted, write */
+#define C(a, v) W(a, R(a) & ~v)
 
 	wil->hw_version = R(RGF_USER_FW_REV_ID);
 	rev_id = wil->hw_version & 0xff;
@@ -286,11 +287,14 @@ static void wil_target_reset(struct wil6210_priv *wil)
 	if (rev_id == 2)
 		W(RGF_PCIE_LOS_COUNTER_CTL, BIT(8));
 
+	C(RGF_USER_CLKS_CTL_0, BIT_USER_CLKS_RST_PWGD);
+
 	wil_dbg_misc(wil, "Reset completed in %d ms\n", delay);
 
 #undef R
 #undef W
 #undef S
+#undef C
 }
 
 void wil_mbox_ring_le2cpus(struct wil6210_mbox_ring *r)
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index b376399e68ca..f7d8f0ead23e 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -79,6 +79,8 @@ struct RGF_ICR {
 #define RGF_USER_MAC_CPU_0		(0x8801fc)
 #define RGF_USER_USER_SCRATCH_PAD	(0x8802bc)
 #define RGF_USER_FW_REV_ID		(0x880a8c) /* chip revision */
+#define RGF_USER_CLKS_CTL_0		(0x880abc)
+	#define BIT_USER_CLKS_RST_PWGD	BIT(11) /* reset on "power good" */
 #define RGF_USER_CLKS_CTL_SW_RST_VEC_0	(0x880b04)
 #define RGF_USER_CLKS_CTL_SW_RST_VEC_1	(0x880b08)
 #define RGF_USER_CLKS_CTL_SW_RST_VEC_2	(0x880b0c)
-- 
cgit v1.2.2


From fa4a18e73b21402ed00cfb852d94d169994c5aa3 Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Mon, 17 Mar 2014 15:34:16 +0200
Subject: wil6210: reduce printing

Convert 2 often printed messages to dynamic ones

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wil6210/cfg80211.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index b1bc00724cd2..848ed8551f2c 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -179,7 +179,7 @@ static int wil_cfg80211_get_station(struct wiphy *wiphy,
 
 	int cid = wil_find_cid(wil, mac);
 
-	wil_info(wil, "%s(%pM) CID %d\n", __func__, mac, cid);
+	wil_dbg_misc(wil, "%s(%pM) CID %d\n", __func__, mac, cid);
 	if (cid < 0)
 		return cid;
 
@@ -218,7 +218,7 @@ static int wil_cfg80211_dump_station(struct wiphy *wiphy,
 		return -ENOENT;
 
 	memcpy(mac, wil->sta[cid].addr, ETH_ALEN);
-	wil_info(wil, "%s(%pM) CID %d\n", __func__, mac, cid);
+	wil_dbg_misc(wil, "%s(%pM) CID %d\n", __func__, mac, cid);
 
 	rc = wil_cid_fill_sinfo(wil, cid, sinfo);
 
-- 
cgit v1.2.2


From 8bf6adb988c6843f0e58d2b210526cf947a8a746 Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Mon, 17 Mar 2014 15:34:17 +0200
Subject: wil6210: fix memory leak in the AP flow

When switching between STA and AP modes, memory allocated for Rx vring leaks
This is because start_ap() allocates Rx vring but stop_ap() do not free it.
Logically, Rx vring is not valid (HW can't use it anymore), so free it in reset()
Also, check double init for Rx vring and bail out with -EINVAL

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wil6210/main.c | 2 ++
 drivers/net/wireless/ath/wil6210/txrx.c | 5 +++++
 2 files changed, 7 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index 684762203a62..de952ab78607 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -343,6 +343,8 @@ int wil_reset(struct wil6210_priv *wil)
 	/* TODO: put MAC in reset */
 	wil_target_reset(wil);
 
+	wil_rx_fini(wil);
+
 	/* init after reset */
 	wil->pending_connect_cid = -1;
 	reinit_completion(&wil->wmi_ready);
diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index 5cda0ea9925f..97d036adb382 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -557,6 +557,11 @@ int wil_rx_init(struct wil6210_priv *wil)
 	struct vring *vring = &wil->vring_rx;
 	int rc;
 
+	if (vring->va) {
+		wil_err(wil, "Rx ring already allocated\n");
+		return -EINVAL;
+	}
+
 	vring->size = WIL6210_RX_RING_SIZE;
 	rc = wil_vring_alloc(wil, vring);
 	if (rc)
-- 
cgit v1.2.2


From 0fef1818d0888067f1231b05a08b2d56f017a169 Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Mon, 17 Mar 2014 15:34:18 +0200
Subject: wil6210: Fix kernel oops in reset flow

wil_reset() removes vring's
At the same time NAPI may be active performing Rx/Tx completion.
If this happens, Rx/Tx polling functions going to access already removed vrings

Make sure NAPI is idle and won't be started prior to vring removal.
For this, track NAPI enabled state

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wil6210/interrupt.c | 15 ++++++++++++---
 drivers/net/wireless/ath/wil6210/main.c      |  9 ++++++++-
 drivers/net/wireless/ath/wil6210/wil6210.h   |  1 +
 3 files changed, 21 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/wil6210/interrupt.c b/drivers/net/wireless/ath/wil6210/interrupt.c
index 52c40e1d593a..201cf06ef5d8 100644
--- a/drivers/net/wireless/ath/wil6210/interrupt.c
+++ b/drivers/net/wireless/ath/wil6210/interrupt.c
@@ -195,8 +195,12 @@ static irqreturn_t wil6210_irq_rx(int irq, void *cookie)
 	if (isr & BIT_DMA_EP_RX_ICR_RX_DONE) {
 		wil_dbg_irq(wil, "RX done\n");
 		isr &= ~BIT_DMA_EP_RX_ICR_RX_DONE;
-		wil_dbg_txrx(wil, "NAPI schedule\n");
-		napi_schedule(&wil->napi_rx);
+		if (test_bit(wil_status_reset_done, &wil->status)) {
+			wil_dbg_txrx(wil, "NAPI(Rx) schedule\n");
+			napi_schedule(&wil->napi_rx);
+		} else {
+			wil_err(wil, "Got Rx interrupt while in reset\n");
+		}
 	}
 
 	if (isr)
@@ -226,10 +230,15 @@ static irqreturn_t wil6210_irq_tx(int irq, void *cookie)
 
 	if (isr & BIT_DMA_EP_TX_ICR_TX_DONE) {
 		wil_dbg_irq(wil, "TX done\n");
-		napi_schedule(&wil->napi_tx);
 		isr &= ~BIT_DMA_EP_TX_ICR_TX_DONE;
 		/* clear also all VRING interrupts */
 		isr &= ~(BIT(25) - 1UL);
+		if (test_bit(wil_status_reset_done, &wil->status)) {
+			wil_dbg_txrx(wil, "NAPI(Tx) schedule\n");
+			napi_schedule(&wil->napi_tx);
+		} else {
+			wil_err(wil, "Got Tx interrupt while in reset\n");
+		}
 	}
 
 	if (isr)
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index de952ab78607..0831d4cd173b 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -329,11 +329,16 @@ int wil_reset(struct wil6210_priv *wil)
 {
 	int rc;
 
+	wil->status = 0; /* prevent NAPI from being scheduled */
+	if (test_bit(wil_status_napi_en, &wil->status)) {
+		napi_synchronize(&wil->napi_rx);
+		napi_synchronize(&wil->napi_tx);
+	}
+
 	cancel_work_sync(&wil->disconnect_worker);
 	wil6210_disconnect(wil, NULL);
 
 	wil6210_disable_irq(wil);
-	wil->status = 0;
 
 	wmi_event_flush(wil);
 
@@ -426,6 +431,7 @@ static int __wil_up(struct wil6210_priv *wil)
 
 	napi_enable(&wil->napi_rx);
 	napi_enable(&wil->napi_tx);
+	set_bit(wil_status_napi_en, &wil->status);
 
 	return 0;
 }
@@ -443,6 +449,7 @@ int wil_up(struct wil6210_priv *wil)
 
 static int __wil_down(struct wil6210_priv *wil)
 {
+	clear_bit(wil_status_napi_en, &wil->status);
 	napi_disable(&wil->napi_rx);
 	napi_disable(&wil->napi_tx);
 
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index f7d8f0ead23e..89cbdc35b3e4 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -249,6 +249,7 @@ enum { /* for wil6210_priv.status */
 	wil_status_dontscan,
 	wil_status_reset_done,
 	wil_status_irqen, /* FIXME: interrupts enabled - for debug */
+	wil_status_napi_en, /* NAPI enabled protected by wil->mutex */
 };
 
 struct pci_dev;
-- 
cgit v1.2.2


From ed6f9dc62f72df5710cf86279d3304319d049291 Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Mon, 17 Mar 2014 15:34:19 +0200
Subject: wil6210: fw error recovery

upon fw error interrupt - in STA mode, disconnect/cancel scan and
then reset FW/HW
added module param - no_fw_recovery which is false by default

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wil6210/cfg80211.c  |  8 ++++-
 drivers/net/wireless/ath/wil6210/interrupt.c |  1 +
 drivers/net/wireless/ath/wil6210/main.c      | 48 ++++++++++++++++++++++++++++
 drivers/net/wireless/ath/wil6210/wil6210.h   |  2 ++
 4 files changed, 58 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index 848ed8551f2c..f6a12e7f80be 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -265,6 +265,7 @@ static int wil_cfg80211_scan(struct wiphy *wiphy,
 		u16 chnl[4];
 	} __packed cmd;
 	uint i, n;
+	int rc;
 
 	if (wil->scan_request) {
 		wil_err(wil, "Already scanning\n");
@@ -305,8 +306,13 @@ static int wil_cfg80211_scan(struct wiphy *wiphy,
 			     request->channels[i]->center_freq);
 	}
 
-	return wmi_send(wil, WMI_START_SCAN_CMDID, &cmd, sizeof(cmd.cmd) +
+	rc = wmi_send(wil, WMI_START_SCAN_CMDID, &cmd, sizeof(cmd.cmd) +
 			cmd.cmd.num_channels * sizeof(cmd.cmd.channel_list[0]));
+
+	if (rc)
+		wil->scan_request = NULL;
+
+	return rc;
 }
 
 static int wil_cfg80211_connect(struct wiphy *wiphy,
diff --git a/drivers/net/wireless/ath/wil6210/interrupt.c b/drivers/net/wireless/ath/wil6210/interrupt.c
index 201cf06ef5d8..5824cd41e4ba 100644
--- a/drivers/net/wireless/ath/wil6210/interrupt.c
+++ b/drivers/net/wireless/ath/wil6210/interrupt.c
@@ -328,6 +328,7 @@ static irqreturn_t wil6210_irq_misc_thread(int irq, void *cookie)
 	if (isr & ISR_MISC_FW_ERROR) {
 		wil_notify_fw_error(wil);
 		isr &= ~ISR_MISC_FW_ERROR;
+		wil_fw_error_recovery(wil);
 	}
 
 	if (isr & ISR_MISC_MBOX_EVT) {
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index 0831d4cd173b..32ac1b906abe 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -21,6 +21,10 @@
 #include "wil6210.h"
 #include "txrx.h"
 
+static bool no_fw_recovery;
+module_param(no_fw_recovery, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(no_fw_recovery, " disable FW error recovery");
+
 /*
  * Due to a hardware issue,
  * one has to read/write to/from NIC in 32-bit chunks;
@@ -144,6 +148,36 @@ static void wil_connect_timer_fn(ulong x)
 	schedule_work(&wil->disconnect_worker);
 }
 
+static void wil_fw_error_worker(struct work_struct *work)
+{
+	struct wil6210_priv *wil = container_of(work,
+			struct wil6210_priv, fw_error_worker);
+	struct wireless_dev *wdev = wil->wdev;
+
+	wil_dbg_misc(wil, "fw error worker\n");
+
+	if (no_fw_recovery)
+		return;
+
+	switch (wdev->iftype) {
+	case NL80211_IFTYPE_STATION:
+	case NL80211_IFTYPE_P2P_CLIENT:
+	case NL80211_IFTYPE_MONITOR:
+		wil_info(wil, "fw error recovery started...\n");
+		wil_reset(wil);
+
+		/* need to re-allocate Rx ring after reset */
+		wil_rx_init(wil);
+		break;
+	case NL80211_IFTYPE_AP:
+	case NL80211_IFTYPE_P2P_GO:
+		/* recovery in these modes is done by upper layers */
+		break;
+	default:
+		break;
+	}
+}
+
 static int wil_find_free_vring(struct wil6210_priv *wil)
 {
 	int i;
@@ -196,6 +230,7 @@ int wil_priv_init(struct wil6210_priv *wil)
 	INIT_WORK(&wil->connect_worker, wil_connect_worker);
 	INIT_WORK(&wil->disconnect_worker, wil_disconnect_worker);
 	INIT_WORK(&wil->wmi_event_worker, wmi_event_worker);
+	INIT_WORK(&wil->fw_error_worker, wil_fw_error_worker);
 
 	INIT_LIST_HEAD(&wil->pending_wmi_ev);
 	spin_lock_init(&wil->wmi_ev_lock);
@@ -222,6 +257,7 @@ void wil6210_disconnect(struct wil6210_priv *wil, void *bssid)
 void wil_priv_deinit(struct wil6210_priv *wil)
 {
 	cancel_work_sync(&wil->disconnect_worker);
+	cancel_work_sync(&wil->fw_error_worker);
 	wil6210_disconnect(wil, NULL);
 	wmi_event_flush(wil);
 	destroy_workqueue(wil->wmi_wq_conn);
@@ -335,6 +371,13 @@ int wil_reset(struct wil6210_priv *wil)
 		napi_synchronize(&wil->napi_tx);
 	}
 
+	if (wil->scan_request) {
+		wil_dbg_misc(wil, "Abort scan_request 0x%p\n",
+			     wil->scan_request);
+		cfg80211_scan_done(wil->scan_request, true);
+		wil->scan_request = NULL;
+	}
+
 	cancel_work_sync(&wil->disconnect_worker);
 	wil6210_disconnect(wil, NULL);
 
@@ -363,6 +406,11 @@ int wil_reset(struct wil6210_priv *wil)
 	return rc;
 }
 
+void wil_fw_error_recovery(struct wil6210_priv *wil)
+{
+	wil_dbg_misc(wil, "starting fw error recovery\n");
+	schedule_work(&wil->fw_error_worker);
+}
 
 void wil_link_on(struct wil6210_priv *wil)
 {
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index 89cbdc35b3e4..80573f786df6 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -370,6 +370,7 @@ struct wil6210_priv {
 	struct workqueue_struct *wmi_wq_conn; /* for connect worker */
 	struct work_struct connect_worker;
 	struct work_struct disconnect_worker;
+	struct work_struct fw_error_worker;	/* for FW error recovery */
 	struct timer_list connect_timer;
 	int pending_connect_cid;
 	struct list_head pending_wmi_ev;
@@ -447,6 +448,7 @@ void wil_if_remove(struct wil6210_priv *wil);
 int wil_priv_init(struct wil6210_priv *wil);
 void wil_priv_deinit(struct wil6210_priv *wil);
 int wil_reset(struct wil6210_priv *wil);
+void wil_fw_error_recovery(struct wil6210_priv *wil);
 void wil_link_on(struct wil6210_priv *wil);
 void wil_link_off(struct wil6210_priv *wil);
 int wil_up(struct wil6210_priv *wil);
-- 
cgit v1.2.2


From 4cd9e8377f6f18ffabad2cf0967855432db3dbce Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Mon, 17 Mar 2014 15:34:20 +0200
Subject: wil6210: fix secondary connect

when STA receiving connect() when already connected,
it should return error

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wil6210/cfg80211.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index f6a12e7f80be..597540a307d8 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -327,6 +327,10 @@ static int wil_cfg80211_connect(struct wiphy *wiphy,
 	int ch;
 	int rc = 0;
 
+	if (test_bit(wil_status_fwconnecting, &wil->status) ||
+	    test_bit(wil_status_fwconnected, &wil->status))
+		return -EALREADY;
+
 	bss = cfg80211_get_bss(wiphy, sme->channel, sme->bssid,
 			       sme->ssid, sme->ssid_len,
 			       WLAN_CAPABILITY_ESS, WLAN_CAPABILITY_ESS);
-- 
cgit v1.2.2


From 9c3bde56b7e6403a9f86b63bb02c9a5cb74456fa Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Mon, 17 Mar 2014 15:34:21 +0200
Subject: wil6210: serialize fw_recovery and start_ap

These methods can change device state, serialize with others
similar ones like up/down

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wil6210/cfg80211.c | 15 +++++++++++----
 drivers/net/wireless/ath/wil6210/main.c     |  2 ++
 2 files changed, 13 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index 597540a307d8..ed5a7e145027 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -609,18 +609,20 @@ static int wil_cfg80211_start_ap(struct wiphy *wiphy,
 	if (wil_fix_bcon(wil, bcon))
 		wil_dbg_misc(wil, "Fixed bcon\n");
 
+	mutex_lock(&wil->mutex);
+
 	rc = wil_reset(wil);
 	if (rc)
-		return rc;
+		goto out;
 
 	/* Rx VRING. */
 	rc = wil_rx_init(wil);
 	if (rc)
-		return rc;
+		goto out;
 
 	rc = wmi_set_ssid(wil, info->ssid_len, info->ssid);
 	if (rc)
-		return rc;
+		goto out;
 
 	/* MAC address - pre-requisite for other commands */
 	wmi_set_mac_address(wil, ndev->dev_addr);
@@ -644,11 +646,13 @@ static int wil_cfg80211_start_ap(struct wiphy *wiphy,
 	rc = wmi_pcp_start(wil, info->beacon_interval, wmi_nettype,
 			   channel->hw_value);
 	if (rc)
-		return rc;
+		goto out;
 
 
 	netif_carrier_on(ndev);
 
+out:
+	mutex_unlock(&wil->mutex);
 	return rc;
 }
 
@@ -658,8 +662,11 @@ static int wil_cfg80211_stop_ap(struct wiphy *wiphy,
 	int rc = 0;
 	struct wil6210_priv *wil = wiphy_to_wil(wiphy);
 
+	mutex_lock(&wil->mutex);
+
 	rc = wmi_pcp_stop(wil);
 
+	mutex_unlock(&wil->mutex);
 	return rc;
 }
 
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index 32ac1b906abe..351925b5d2c8 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -159,6 +159,7 @@ static void wil_fw_error_worker(struct work_struct *work)
 	if (no_fw_recovery)
 		return;
 
+	mutex_lock(&wil->mutex);
 	switch (wdev->iftype) {
 	case NL80211_IFTYPE_STATION:
 	case NL80211_IFTYPE_P2P_CLIENT:
@@ -176,6 +177,7 @@ static void wil_fw_error_worker(struct work_struct *work)
 	default:
 		break;
 	}
+	mutex_unlock(&wil->mutex);
 }
 
 static int wil_find_free_vring(struct wil6210_priv *wil)
-- 
cgit v1.2.2


From b5998e6a3d695c9261a1b1d9cf27db526aa72b3b Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Mon, 17 Mar 2014 15:34:22 +0200
Subject: wil6210: use GRO

GRO is easy to enable when already using NAPI framework,
and it improves CPU utilisation. Enable it by default.

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wil6210/netdev.c |  2 +-
 drivers/net/wireless/ath/wil6210/txrx.c   | 14 +++++++-------
 2 files changed, 8 insertions(+), 8 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/wil6210/netdev.c b/drivers/net/wireless/ath/wil6210/netdev.c
index 5991802a6701..fdcaeb820e75 100644
--- a/drivers/net/wireless/ath/wil6210/netdev.c
+++ b/drivers/net/wireless/ath/wil6210/netdev.c
@@ -128,7 +128,7 @@ void *wil_if_alloc(struct device *dev, void __iomem *csr)
 	ndev->netdev_ops = &wil_netdev_ops;
 	ndev->ieee80211_ptr = wdev;
 	ndev->hw_features = NETIF_F_HW_CSUM | NETIF_F_RXCSUM |
-			    NETIF_F_SG;
+			    NETIF_F_SG | NETIF_F_GRO;
 	ndev->features |= ndev->hw_features;
 	SET_NETDEV_DEV(ndev, wiphy_dev(wdev->wiphy));
 	wdev->netdev = ndev;
diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index 97d036adb382..cfd36cc0336b 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -488,7 +488,7 @@ static int wil_rx_refill(struct wil6210_priv *wil, int count)
  */
 void wil_netif_rx_any(struct sk_buff *skb, struct net_device *ndev)
 {
-	int rc;
+	gro_result_t rc;
 	struct wil6210_priv *wil = ndev_to_wil(ndev);
 	unsigned int len = skb->len;
 	struct vring_rx_desc *d = wil_skb_rxdesc(skb);
@@ -497,17 +497,17 @@ void wil_netif_rx_any(struct sk_buff *skb, struct net_device *ndev)
 
 	skb_orphan(skb);
 
-	rc = netif_receive_skb(skb);
+	rc = napi_gro_receive(&wil->napi_rx, skb);
 
-	if (likely(rc == NET_RX_SUCCESS)) {
+	if (unlikely(rc == GRO_DROP)) {
+		ndev->stats.rx_dropped++;
+		stats->rx_dropped++;
+		wil_dbg_txrx(wil, "Rx drop %d bytes\n", len);
+	} else {
 		ndev->stats.rx_packets++;
 		stats->rx_packets++;
 		ndev->stats.rx_bytes += len;
 		stats->rx_bytes += len;
-
-	} else {
-		ndev->stats.rx_dropped++;
-		stats->rx_dropped++;
 	}
 }
 
-- 
cgit v1.2.2


From d28bcc302678e3c2932c4e4e73cd4f40ca4c5fc0 Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Mon, 17 Mar 2014 15:34:23 +0200
Subject: wil6210: target reset flow update

Use 'real' indication for hardware state.

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wil6210/main.c    | 11 ++++++-----
 drivers/net/wireless/ath/wil6210/wil6210.h |  3 ++-
 2 files changed, 8 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index 351925b5d2c8..c782e2522d38 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -269,7 +269,7 @@ void wil_priv_deinit(struct wil6210_priv *wil)
 static void wil_target_reset(struct wil6210_priv *wil)
 {
 	int delay = 0;
-	u32 baud_rate;
+	u32 hw_state;
 	u32 rev_id;
 
 	wil_dbg_misc(wil, "Resetting...\n");
@@ -312,15 +312,16 @@ static void wil_target_reset(struct wil6210_priv *wil)
 	}
 	W(RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0);
 
-	/* wait until device ready. Use baud rate */
+	/* wait until device ready */
 	do {
 		msleep(1);
-		baud_rate = R(RGF_USER_SERIAL_BAUD_RATE);
+		hw_state = R(RGF_USER_HW_MACHINE_STATE);
 		if (delay++ > 100) {
-			wil_err(wil, "Reset not completed\n");
+			wil_err(wil, "Reset not completed, hw_state 0x%08x\n",
+				hw_state);
 			return;
 		}
-	} while (baud_rate != 0x15e);
+	} while (hw_state != HW_MACHINE_BOOT_DONE);
 
 	if (rev_id == 2)
 		W(RGF_PCIE_LOS_COUNTER_CTL, BIT(8));
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index 80573f786df6..fb1006b2a4e2 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -74,7 +74,8 @@ struct RGF_ICR {
 } __packed;
 
 /* registers - FW addresses */
-#define RGF_USER_SERIAL_BAUD_RATE	(0x880050)
+#define RGF_USER_HW_MACHINE_STATE	(0x8801dc)
+	#define HW_MACHINE_BOOT_DONE	(0x3fffffd)
 #define RGF_USER_USER_CPU_0		(0x8801e0)
 #define RGF_USER_MAC_CPU_0		(0x8801fc)
 #define RGF_USER_USER_SCRATCH_PAD	(0x8802bc)
-- 
cgit v1.2.2


From 260e695196de8b91bbab482d3804e4e0312a59b6 Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Mon, 17 Mar 2014 15:34:24 +0200
Subject: wil6210: add memory barriers for the reset flow

make sure reset flow executed in order

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wil6210/main.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index c782e2522d38..0005d9b90772 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -289,19 +289,23 @@ static void wil_target_reset(struct wil6210_priv *wil)
 	S(RGF_USER_CLKS_CTL_SW_RST_MASK_0, BIT(6));
 	/* car_perst_rst_src_n_mask */
 	S(RGF_USER_CLKS_CTL_SW_RST_MASK_0, BIT(7));
+	wmb(); /* order is important here */
 
 	W(RGF_USER_MAC_CPU_0,  BIT(1)); /* mac_cpu_man_rst */
 	W(RGF_USER_USER_CPU_0, BIT(1)); /* user_cpu_man_rst */
+	wmb(); /* order is important here */
 
 	W(RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0xFE000000);
 	W(RGF_USER_CLKS_CTL_SW_RST_VEC_1, 0x0000003F);
 	W(RGF_USER_CLKS_CTL_SW_RST_VEC_3, 0x00000170);
 	W(RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0xFFE7FC00);
+	wmb(); /* order is important here */
 
 	W(RGF_USER_CLKS_CTL_SW_RST_VEC_3, 0);
 	W(RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0);
 	W(RGF_USER_CLKS_CTL_SW_RST_VEC_1, 0);
 	W(RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0);
+	wmb(); /* order is important here */
 
 	W(RGF_USER_CLKS_CTL_SW_RST_VEC_3, 0x00000001);
 	if (rev_id == 1) {
@@ -311,6 +315,7 @@ static void wil_target_reset(struct wil6210_priv *wil)
 		W(RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0x00008000);
 	}
 	W(RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0);
+	wmb(); /* order is important here */
 
 	/* wait until device ready */
 	do {
@@ -327,6 +332,7 @@ static void wil_target_reset(struct wil6210_priv *wil)
 		W(RGF_PCIE_LOS_COUNTER_CTL, BIT(8));
 
 	C(RGF_USER_CLKS_CTL_0, BIT_USER_CLKS_RST_PWGD);
+	wmb(); /* order is important here */
 
 	wil_dbg_misc(wil, "Reset completed in %d ms\n", delay);
 
-- 
cgit v1.2.2


From 097638a08acde0320c44969a5dff3af105c341a0 Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Mon, 17 Mar 2014 15:34:25 +0200
Subject: wil6210: fix race between disconnect and Tx NAPI

When disconnecting some CID, corresponded Tx vring get released. During vring
release, all descriptors get freed. It is possible that Tx NAPI working on the same
vring simultaneously. If it happens, descriptor may be double freed.

To protect from the race above, make sure NAPI won't process the same vring.
Introduce 'enabled' flag in the struct vring_tx_data. Proceed with Tx NAPI only if
'enabled' flag set. Prior to Tx vring release, clear this flag and make sure NAPI
get synchronized.

NAPI enablement status protected by wil->mutex, add protection where it was
missing and check for it.

During reset, disconnect all peers first, then proceed with the Rx vring. It allows for
the disconnect flow to observe proper 'wil->status' and correctly notify cfg80211 about
connection status change

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wil6210/cfg80211.c |  4 ++++
 drivers/net/wireless/ath/wil6210/main.c     | 17 +++++++++++++----
 drivers/net/wireless/ath/wil6210/pcie_bus.c |  2 ++
 drivers/net/wireless/ath/wil6210/txrx.c     | 17 +++++++++++++++++
 drivers/net/wireless/ath/wil6210/wil6210.h  |  9 +++++++++
 drivers/net/wireless/ath/wil6210/wmi.c      |  2 ++
 6 files changed, 47 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index ed5a7e145027..4806a49cb61b 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -674,7 +674,11 @@ static int wil_cfg80211_del_station(struct wiphy *wiphy,
 				    struct net_device *dev, u8 *mac)
 {
 	struct wil6210_priv *wil = wiphy_to_wil(wiphy);
+
+	mutex_lock(&wil->mutex);
 	wil6210_disconnect(wil, mac);
+	mutex_unlock(&wil->mutex);
+
 	return 0;
 }
 
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index 0005d9b90772..95f4efe9ef37 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -133,7 +133,9 @@ static void wil_disconnect_worker(struct work_struct *work)
 	struct wil6210_priv *wil = container_of(work,
 			struct wil6210_priv, disconnect_worker);
 
+	mutex_lock(&wil->mutex);
 	_wil6210_disconnect(wil, NULL);
+	mutex_unlock(&wil->mutex);
 }
 
 static void wil_connect_timer_fn(ulong x)
@@ -260,7 +262,9 @@ void wil_priv_deinit(struct wil6210_priv *wil)
 {
 	cancel_work_sync(&wil->disconnect_worker);
 	cancel_work_sync(&wil->fw_error_worker);
+	mutex_lock(&wil->mutex);
 	wil6210_disconnect(wil, NULL);
+	mutex_unlock(&wil->mutex);
 	wmi_event_flush(wil);
 	destroy_workqueue(wil->wmi_wq_conn);
 	destroy_workqueue(wil->wmi_wq);
@@ -374,10 +378,14 @@ int wil_reset(struct wil6210_priv *wil)
 {
 	int rc;
 
+	WARN_ON(!mutex_is_locked(&wil->mutex));
+
+	cancel_work_sync(&wil->disconnect_worker);
+	wil6210_disconnect(wil, NULL);
+
 	wil->status = 0; /* prevent NAPI from being scheduled */
 	if (test_bit(wil_status_napi_en, &wil->status)) {
 		napi_synchronize(&wil->napi_rx);
-		napi_synchronize(&wil->napi_tx);
 	}
 
 	if (wil->scan_request) {
@@ -387,9 +395,6 @@ int wil_reset(struct wil6210_priv *wil)
 		wil->scan_request = NULL;
 	}
 
-	cancel_work_sync(&wil->disconnect_worker);
-	wil6210_disconnect(wil, NULL);
-
 	wil6210_disable_irq(wil);
 
 	wmi_event_flush(wil);
@@ -447,6 +452,8 @@ static int __wil_up(struct wil6210_priv *wil)
 	struct wireless_dev *wdev = wil->wdev;
 	int rc;
 
+	WARN_ON(!mutex_is_locked(&wil->mutex));
+
 	rc = wil_reset(wil);
 	if (rc)
 		return rc;
@@ -506,6 +513,8 @@ int wil_up(struct wil6210_priv *wil)
 
 static int __wil_down(struct wil6210_priv *wil)
 {
+	WARN_ON(!mutex_is_locked(&wil->mutex));
+
 	clear_bit(wil_status_napi_en, &wil->status);
 	napi_disable(&wil->napi_rx);
 	napi_disable(&wil->napi_tx);
diff --git a/drivers/net/wireless/ath/wil6210/pcie_bus.c b/drivers/net/wireless/ath/wil6210/pcie_bus.c
index c60976144db3..58fc0962e2e2 100644
--- a/drivers/net/wireless/ath/wil6210/pcie_bus.c
+++ b/drivers/net/wireless/ath/wil6210/pcie_bus.c
@@ -70,7 +70,9 @@ static int wil_if_pcie_enable(struct wil6210_priv *wil)
 		goto stop_master;
 
 	/* need reset here to obtain MAC */
+	mutex_lock(&wil->mutex);
 	rc = wil_reset(wil);
+	mutex_unlock(&wil->mutex);
 	if (rc)
 		goto release_irq;
 
diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index cfd36cc0336b..c8c547457eb4 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -618,6 +618,7 @@ int wil_vring_init_tx(struct wil6210_priv *wil, int id, int size,
 		struct wmi_vring_cfg_done_event cmd;
 	} __packed reply;
 	struct vring *vring = &wil->vring_tx[id];
+	struct vring_tx_data *txdata = &wil->vring_tx_data[id];
 
 	if (vring->va) {
 		wil_err(wil, "Tx ring [%d] already allocated\n", id);
@@ -625,6 +626,7 @@ int wil_vring_init_tx(struct wil6210_priv *wil, int id, int size,
 		goto out;
 	}
 
+	memset(txdata, 0, sizeof(*txdata));
 	vring->size = size;
 	rc = wil_vring_alloc(wil, vring);
 	if (rc)
@@ -648,6 +650,8 @@ int wil_vring_init_tx(struct wil6210_priv *wil, int id, int size,
 	}
 	vring->hwtail = le32_to_cpu(reply.cmd.tx_vring_tail_ptr);
 
+	txdata->enabled = 1;
+
 	return 0;
  out_free:
 	wil_vring_free(wil, vring, 1);
@@ -660,9 +664,16 @@ void wil_vring_fini_tx(struct wil6210_priv *wil, int id)
 {
 	struct vring *vring = &wil->vring_tx[id];
 
+	WARN_ON(!mutex_is_locked(&wil->mutex));
+
 	if (!vring->va)
 		return;
 
+	/* make sure NAPI won't touch this vring */
+	wil->vring_tx_data[id].enabled = 0;
+	if (test_bit(wil_status_napi_en, &wil->status))
+		napi_synchronize(&wil->napi_tx);
+
 	wil_vring_free(wil, vring, 1);
 }
 
@@ -1028,6 +1039,7 @@ int wil_tx_complete(struct wil6210_priv *wil, int ringid)
 	struct net_device *ndev = wil_to_ndev(wil);
 	struct device *dev = wil_to_dev(wil);
 	struct vring *vring = &wil->vring_tx[ringid];
+	struct vring_tx_data *txdata = &wil->vring_tx_data[ringid];
 	int done = 0;
 	int cid = wil->vring2cid_tid[ringid][0];
 	struct wil_net_stats *stats = &wil->sta[cid].stats;
@@ -1038,6 +1050,11 @@ int wil_tx_complete(struct wil6210_priv *wil, int ringid)
 		return 0;
 	}
 
+	if (!txdata->enabled) {
+		wil_info(wil, "Tx irq[%d]: vring disabled\n", ringid);
+		return 0;
+	}
+
 	wil_dbg_txrx(wil, "%s(%d)\n", __func__, ringid);
 
 	while (!wil_vring_is_empty(vring)) {
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index fb1006b2a4e2..2a2dec75f026 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -243,6 +243,14 @@ struct vring {
 	struct wil_ctx *ctx; /* ctx[size] - software context */
 };
 
+/**
+ * Additional data for Tx Vring
+ */
+struct vring_tx_data {
+	int enabled;
+
+};
+
 enum { /* for wil6210_priv.status */
 	wil_status_fwready = 0,
 	wil_status_fwconnecting,
@@ -386,6 +394,7 @@ struct wil6210_priv {
 	/* DMA related */
 	struct vring vring_rx;
 	struct vring vring_tx[WIL6210_MAX_TX_RINGS];
+	struct vring_tx_data vring_tx_data[WIL6210_MAX_TX_RINGS];
 	u8 vring2cid_tid[WIL6210_MAX_TX_RINGS][2]; /* [0] - CID, [1] - TID */
 	struct wil_sta_info sta[WIL6210_MAX_CID];
 	/* scan */
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index 58c3afcf839d..2ba56eef0c45 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -462,7 +462,9 @@ static void wmi_evt_disconnect(struct wil6210_priv *wil, int id,
 
 	wil->sinfo_gen++;
 
+	mutex_lock(&wil->mutex);
 	wil6210_disconnect(wil, evt->bssid);
+	mutex_unlock(&wil->mutex);
 }
 
 static void wmi_evt_notify(struct wil6210_priv *wil, int id, void *d, int len)
-- 
cgit v1.2.2


From dad0d04fa7ba41ce603a01e8e64967650303e9a2 Mon Sep 17 00:00:00 2001
From: Fariya Fatima <fariyaf@gmail.com>
Date: Sun, 16 Mar 2014 03:47:02 +0530
Subject: rsi: Add RS9113 wireless driver

This patch adds the Redpine Signals' 91x wireless driver.

Signed-off-by: Fariya Fatima <fariyaf@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/Kconfig                |    1 +
 drivers/net/wireless/Makefile               |    1 +
 drivers/net/wireless/rsi/Kconfig            |   30 +
 drivers/net/wireless/rsi/Makefile           |   12 +
 drivers/net/wireless/rsi/rsi_91x_core.c     |  342 +++++++
 drivers/net/wireless/rsi/rsi_91x_debugfs.c  |  339 +++++++
 drivers/net/wireless/rsi/rsi_91x_mac80211.c | 1008 +++++++++++++++++++++
 drivers/net/wireless/rsi/rsi_91x_main.c     |  270 ++++++
 drivers/net/wireless/rsi/rsi_91x_mgmt.c     | 1302 +++++++++++++++++++++++++++
 drivers/net/wireless/rsi/rsi_91x_pkt.c      |  196 ++++
 drivers/net/wireless/rsi/rsi_91x_sdio.c     |  850 +++++++++++++++++
 drivers/net/wireless/rsi/rsi_91x_sdio_ops.c |  566 ++++++++++++
 drivers/net/wireless/rsi/rsi_91x_usb.c      |  575 ++++++++++++
 drivers/net/wireless/rsi/rsi_91x_usb_ops.c  |  177 ++++
 drivers/net/wireless/rsi/rsi_boot_params.h  |  126 +++
 drivers/net/wireless/rsi/rsi_common.h       |   87 ++
 drivers/net/wireless/rsi/rsi_debugfs.h      |   48 +
 drivers/net/wireless/rsi/rsi_main.h         |  232 +++++
 drivers/net/wireless/rsi/rsi_mgmt.h         |  285 ++++++
 drivers/net/wireless/rsi/rsi_sdio.h         |  129 +++
 drivers/net/wireless/rsi/rsi_usb.h          |   68 ++
 21 files changed, 6644 insertions(+)
 create mode 100644 drivers/net/wireless/rsi/Kconfig
 create mode 100644 drivers/net/wireless/rsi/Makefile
 create mode 100644 drivers/net/wireless/rsi/rsi_91x_core.c
 create mode 100644 drivers/net/wireless/rsi/rsi_91x_debugfs.c
 create mode 100644 drivers/net/wireless/rsi/rsi_91x_mac80211.c
 create mode 100644 drivers/net/wireless/rsi/rsi_91x_main.c
 create mode 100644 drivers/net/wireless/rsi/rsi_91x_mgmt.c
 create mode 100644 drivers/net/wireless/rsi/rsi_91x_pkt.c
 create mode 100644 drivers/net/wireless/rsi/rsi_91x_sdio.c
 create mode 100644 drivers/net/wireless/rsi/rsi_91x_sdio_ops.c
 create mode 100644 drivers/net/wireless/rsi/rsi_91x_usb.c
 create mode 100644 drivers/net/wireless/rsi/rsi_91x_usb_ops.c
 create mode 100644 drivers/net/wireless/rsi/rsi_boot_params.h
 create mode 100644 drivers/net/wireless/rsi/rsi_common.h
 create mode 100644 drivers/net/wireless/rsi/rsi_debugfs.h
 create mode 100644 drivers/net/wireless/rsi/rsi_main.h
 create mode 100644 drivers/net/wireless/rsi/rsi_mgmt.h
 create mode 100644 drivers/net/wireless/rsi/rsi_sdio.h
 create mode 100644 drivers/net/wireless/rsi/rsi_usb.h

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 9c2c285f35d5..b2137e8f7ca6 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -281,5 +281,6 @@ source "drivers/net/wireless/ti/Kconfig"
 source "drivers/net/wireless/zd1211rw/Kconfig"
 source "drivers/net/wireless/mwifiex/Kconfig"
 source "drivers/net/wireless/cw1200/Kconfig"
+source "drivers/net/wireless/rsi/Kconfig"
 
 endif # WLAN
diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile
index 0fab227025be..0c8891686718 100644
--- a/drivers/net/wireless/Makefile
+++ b/drivers/net/wireless/Makefile
@@ -59,3 +59,4 @@ obj-$(CONFIG_BRCMFMAC)	+= brcm80211/
 obj-$(CONFIG_BRCMSMAC)	+= brcm80211/
 
 obj-$(CONFIG_CW1200)	+= cw1200/
+obj-$(CONFIG_RSI_91X)	+= rsi/
diff --git a/drivers/net/wireless/rsi/Kconfig b/drivers/net/wireless/rsi/Kconfig
new file mode 100644
index 000000000000..35245f994c10
--- /dev/null
+++ b/drivers/net/wireless/rsi/Kconfig
@@ -0,0 +1,30 @@
+config RSI_91X
+	tristate "Redpine Signals Inc 91x WLAN driver support"
+	depends on MAC80211
+	---help---
+	  This option enabes support for RSI 1x1 devices.
+	  Select M (recommended), if you have a RSI 1x1 wireless module.
+
+config RSI_DEBUGFS
+	bool "Redpine Signals Inc debug support"
+	depends on RSI_91X
+	default y
+	---help---
+	 Say Y, if you would like to enable debug support. This option
+	 creates debugfs entries
+
+config RSI_SDIO
+	tristate "Redpine Signals SDIO bus support"
+	depends on MMC && RSI_91X
+	default m
+	---help---
+	  This option enables the SDIO bus support in rsi drivers.
+	  Select M (recommended), if you have a RSI 1x1 wireless module.
+
+config RSI_USB
+	tristate "Redpine Signals USB bus support"
+	depends on USB && RSI_91X
+	default m
+	---help---
+	  This option enables the USB bus support in rsi drivers.
+	  Select M (recommended), if you have a RSI 1x1 wireless module.
diff --git a/drivers/net/wireless/rsi/Makefile b/drivers/net/wireless/rsi/Makefile
new file mode 100644
index 000000000000..25828b692756
--- /dev/null
+++ b/drivers/net/wireless/rsi/Makefile
@@ -0,0 +1,12 @@
+rsi_91x-y			+= rsi_91x_main.o
+rsi_91x-y			+= rsi_91x_core.o
+rsi_91x-y			+= rsi_91x_mac80211.o
+rsi_91x-y			+= rsi_91x_mgmt.o
+rsi_91x-y			+= rsi_91x_pkt.o
+rsi_91x-$(CONFIG_RSI_DEBUGFS)	+= rsi_91x_debugfs.o
+
+rsi_usb-y			+= rsi_91x_usb.o rsi_91x_usb_ops.o
+rsi_sdio-y			+= rsi_91x_sdio.o rsi_91x_sdio_ops.o
+obj-$(CONFIG_RSI_91X) 		+= rsi_91x.o
+obj-$(CONFIG_RSI_SDIO)		+= rsi_sdio.o
+obj-$(CONFIG_RSI_USB)		+= rsi_usb.o
diff --git a/drivers/net/wireless/rsi/rsi_91x_core.c b/drivers/net/wireless/rsi/rsi_91x_core.c
new file mode 100644
index 000000000000..e89535e86caf
--- /dev/null
+++ b/drivers/net/wireless/rsi/rsi_91x_core.c
@@ -0,0 +1,342 @@
+/**
+ * Copyright (c) 2014 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "rsi_mgmt.h"
+#include "rsi_common.h"
+
+/**
+ * rsi_determine_min_weight_queue() - This function determines the queue with
+ *				      the min weight.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: q_num: Corresponding queue number.
+ */
+static u8 rsi_determine_min_weight_queue(struct rsi_common *common)
+{
+	struct wmm_qinfo *tx_qinfo = common->tx_qinfo;
+	u32 q_len = 0;
+	u8 ii = 0;
+
+	for (ii = 0; ii < NUM_EDCA_QUEUES; ii++) {
+		q_len = skb_queue_len(&common->tx_queue[ii]);
+		if ((tx_qinfo[ii].pkt_contended) && q_len) {
+			common->min_weight = tx_qinfo[ii].weight;
+			break;
+		}
+	}
+	return ii;
+}
+
+/**
+ * rsi_recalculate_weights() - This function recalculates the weights
+ *			       corresponding to each queue.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: recontend_queue bool variable
+ */
+static bool rsi_recalculate_weights(struct rsi_common *common)
+{
+	struct wmm_qinfo *tx_qinfo = common->tx_qinfo;
+	bool recontend_queue = false;
+	u8 ii = 0;
+	u32 q_len = 0;
+
+	for (ii = 0; ii < NUM_EDCA_QUEUES; ii++) {
+		q_len = skb_queue_len(&common->tx_queue[ii]);
+		/* Check for the need of contention */
+		if (q_len) {
+			if (tx_qinfo[ii].pkt_contended) {
+				tx_qinfo[ii].weight =
+				((tx_qinfo[ii].weight > common->min_weight) ?
+				 tx_qinfo[ii].weight - common->min_weight : 0);
+			} else {
+				tx_qinfo[ii].pkt_contended = 1;
+				tx_qinfo[ii].weight = tx_qinfo[ii].wme_params;
+				recontend_queue = true;
+			}
+		} else { /* No packets so no contention */
+			tx_qinfo[ii].weight = 0;
+			tx_qinfo[ii].pkt_contended = 0;
+		}
+	}
+
+	return recontend_queue;
+}
+
+/**
+ * rsi_core_determine_hal_queue() - This function determines the queue from
+ *				    which packet has to be dequeued.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: q_num: Corresponding queue number on success.
+ */
+static u8 rsi_core_determine_hal_queue(struct rsi_common *common)
+{
+	bool recontend_queue = false;
+	u32 q_len = 0;
+	u8 q_num = INVALID_QUEUE;
+	u8 ii, min = 0;
+
+	if (skb_queue_len(&common->tx_queue[MGMT_SOFT_Q])) {
+		if (!common->mgmt_q_block)
+			q_num = MGMT_SOFT_Q;
+		return q_num;
+	}
+
+	if (common->pkt_cnt != 0) {
+		--common->pkt_cnt;
+		return common->selected_qnum;
+	}
+
+get_queue_num:
+	q_num = 0;
+	recontend_queue = false;
+
+	q_num = rsi_determine_min_weight_queue(common);
+	q_len = skb_queue_len(&common->tx_queue[ii]);
+	ii = q_num;
+
+	/* Selecting the queue with least back off */
+	for (; ii < NUM_EDCA_QUEUES; ii++) {
+		if (((common->tx_qinfo[ii].pkt_contended) &&
+		     (common->tx_qinfo[ii].weight < min)) && q_len) {
+			min = common->tx_qinfo[ii].weight;
+			q_num = ii;
+		}
+	}
+
+	common->tx_qinfo[q_num].pkt_contended = 0;
+	/* Adjust the back off values for all queues again */
+	recontend_queue = rsi_recalculate_weights(common);
+
+	q_len = skb_queue_len(&common->tx_queue[q_num]);
+	if (!q_len) {
+		/* If any queues are freshly contended and the selected queue
+		 * doesn't have any packets
+		 * then get the queue number again with fresh values
+		 */
+		if (recontend_queue)
+			goto get_queue_num;
+
+		q_num = INVALID_QUEUE;
+		return q_num;
+	}
+
+	common->selected_qnum = q_num;
+	q_len = skb_queue_len(&common->tx_queue[q_num]);
+
+	switch (common->selected_qnum) {
+	case VO_Q:
+		if (q_len > MAX_CONTINUOUS_VO_PKTS)
+			common->pkt_cnt = (MAX_CONTINUOUS_VO_PKTS - 1);
+		else
+			common->pkt_cnt = --q_len;
+		break;
+
+	case VI_Q:
+		if (q_len > MAX_CONTINUOUS_VI_PKTS)
+			common->pkt_cnt = (MAX_CONTINUOUS_VI_PKTS - 1);
+		else
+			common->pkt_cnt = --q_len;
+
+		break;
+
+	default:
+		common->pkt_cnt = 0;
+		break;
+	}
+
+	return q_num;
+}
+
+/**
+ * rsi_core_queue_pkt() - This functions enqueues the packet to the queue
+ *			  specified by the queue number.
+ * @common: Pointer to the driver private structure.
+ * @skb: Pointer to the socket buffer structure.
+ *
+ * Return: None.
+ */
+static void rsi_core_queue_pkt(struct rsi_common *common,
+			       struct sk_buff *skb)
+{
+	u8 q_num = skb->priority;
+	if (q_num >= NUM_SOFT_QUEUES) {
+		rsi_dbg(ERR_ZONE, "%s: Invalid Queue Number: q_num = %d\n",
+			__func__, q_num);
+		dev_kfree_skb(skb);
+		return;
+	}
+
+	skb_queue_tail(&common->tx_queue[q_num], skb);
+}
+
+/**
+ * rsi_core_dequeue_pkt() - This functions dequeues the packet from the queue
+ *			    specified by the queue number.
+ * @common: Pointer to the driver private structure.
+ * @q_num: Queue number.
+ *
+ * Return: Pointer to sk_buff structure.
+ */
+static struct sk_buff *rsi_core_dequeue_pkt(struct rsi_common *common,
+					    u8 q_num)
+{
+	if (q_num >= NUM_SOFT_QUEUES) {
+		rsi_dbg(ERR_ZONE, "%s: Invalid Queue Number: q_num = %d\n",
+			__func__, q_num);
+		return NULL;
+	}
+
+	return skb_dequeue(&common->tx_queue[q_num]);
+}
+
+/**
+ * rsi_core_qos_processor() - This function is used to determine the wmm queue
+ *			      based on the backoff procedure. Data packets are
+ *			      dequeued from the selected hal queue and sent to
+ *			      the below layers.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: None.
+ */
+void rsi_core_qos_processor(struct rsi_common *common)
+{
+	struct rsi_hw *adapter = common->priv;
+	struct sk_buff *skb;
+	unsigned long tstamp_1, tstamp_2;
+	u8 q_num;
+	int status;
+
+	tstamp_1 = jiffies;
+	while (1) {
+		q_num = rsi_core_determine_hal_queue(common);
+		rsi_dbg(DATA_TX_ZONE,
+			"%s: Queue number = %d\n", __func__, q_num);
+
+		if (q_num == INVALID_QUEUE) {
+			rsi_dbg(DATA_TX_ZONE, "%s: No More Pkt\n", __func__);
+			break;
+		}
+
+		mutex_lock(&common->tx_rxlock);
+
+		status = adapter->check_hw_queue_status(adapter, q_num);
+		if ((status <= 0)) {
+			mutex_unlock(&common->tx_rxlock);
+			break;
+		}
+
+		if ((q_num < MGMT_SOFT_Q) &&
+		    ((skb_queue_len(&common->tx_queue[q_num])) <=
+		      MIN_DATA_QUEUE_WATER_MARK)) {
+			if (ieee80211_queue_stopped(adapter->hw, WME_AC(q_num)))
+				ieee80211_wake_queue(adapter->hw,
+						     WME_AC(q_num));
+		}
+
+		skb = rsi_core_dequeue_pkt(common, q_num);
+		if (skb == NULL) {
+			mutex_unlock(&common->tx_rxlock);
+			break;
+		}
+
+		if (q_num == MGMT_SOFT_Q)
+			status = rsi_send_mgmt_pkt(common, skb);
+		else
+			status = rsi_send_data_pkt(common, skb);
+
+		if (status) {
+			mutex_unlock(&common->tx_rxlock);
+			break;
+		}
+
+		common->tx_stats.total_tx_pkt_send[q_num]++;
+
+		tstamp_2 = jiffies;
+		mutex_unlock(&common->tx_rxlock);
+
+		if (tstamp_2 > tstamp_1 + (300 * HZ / 1000))
+			schedule();
+	}
+}
+
+/**
+ * rsi_core_xmit() - This function transmits the packets received from mac80211
+ * @common: Pointer to the driver private structure.
+ * @skb: Pointer to the socket buffer structure.
+ *
+ * Return: None.
+ */
+void rsi_core_xmit(struct rsi_common *common, struct sk_buff *skb)
+{
+	struct rsi_hw *adapter = common->priv;
+	struct ieee80211_tx_info *info;
+	struct skb_info *tx_params;
+	struct ieee80211_hdr *tmp_hdr = NULL;
+	u8 q_num, tid = 0;
+
+	if ((!skb) || (!skb->len)) {
+		rsi_dbg(ERR_ZONE, "%s: Null skb/zero Length packet\n",
+			__func__);
+		goto xmit_fail;
+	}
+	info = IEEE80211_SKB_CB(skb);
+	tx_params = (struct skb_info *)info->driver_data;
+	tmp_hdr = (struct ieee80211_hdr *)&skb->data[0];
+
+	if (common->fsm_state != FSM_MAC_INIT_DONE) {
+		rsi_dbg(ERR_ZONE, "%s: FSM state not open\n", __func__);
+		goto xmit_fail;
+	}
+
+	if ((ieee80211_is_mgmt(tmp_hdr->frame_control)) ||
+	    (ieee80211_is_ctl(tmp_hdr->frame_control))) {
+		q_num = MGMT_SOFT_Q;
+		skb->priority = q_num;
+	} else {
+		if (ieee80211_is_data_qos(tmp_hdr->frame_control)) {
+			tid = (skb->data[24] & IEEE80211_QOS_TID);
+			skb->priority = TID_TO_WME_AC(tid);
+		} else {
+			tid = IEEE80211_NONQOS_TID;
+			skb->priority = BE_Q;
+		}
+		q_num = skb->priority;
+		tx_params->tid = tid;
+		tx_params->sta_id = 0;
+	}
+
+	if ((q_num != MGMT_SOFT_Q) &&
+	    ((skb_queue_len(&common->tx_queue[q_num]) + 1) >=
+	     DATA_QUEUE_WATER_MARK)) {
+		if (!ieee80211_queue_stopped(adapter->hw, WME_AC(q_num)))
+			ieee80211_stop_queue(adapter->hw, WME_AC(q_num));
+		rsi_set_event(&common->tx_thread.event);
+		goto xmit_fail;
+	}
+
+	rsi_core_queue_pkt(common, skb);
+	rsi_dbg(DATA_TX_ZONE, "%s: ===> Scheduling TX thead <===\n", __func__);
+	rsi_set_event(&common->tx_thread.event);
+
+	return;
+
+xmit_fail:
+	rsi_dbg(ERR_ZONE, "%s: Failed to queue packet\n", __func__);
+	/* Dropping pkt here */
+	ieee80211_free_txskb(common->priv->hw, skb);
+}
diff --git a/drivers/net/wireless/rsi/rsi_91x_debugfs.c b/drivers/net/wireless/rsi/rsi_91x_debugfs.c
new file mode 100644
index 000000000000..7e4ef4554411
--- /dev/null
+++ b/drivers/net/wireless/rsi/rsi_91x_debugfs.c
@@ -0,0 +1,339 @@
+/**
+ * Copyright (c) 2014 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "rsi_debugfs.h"
+#include "rsi_sdio.h"
+
+/**
+ * rsi_sdio_stats_read() - This function returns the sdio status of the driver.
+ * @seq: Pointer to the sequence file structure.
+ * @data: Pointer to the data.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+static int rsi_sdio_stats_read(struct seq_file *seq, void *data)
+{
+	struct rsi_common *common = seq->private;
+	struct rsi_hw *adapter = common->priv;
+	struct rsi_91x_sdiodev *dev =
+		(struct rsi_91x_sdiodev *)adapter->rsi_dev;
+
+	seq_printf(seq, "total_sdio_interrupts: %d\n",
+		   dev->rx_info.sdio_int_counter);
+	seq_printf(seq, "sdio_msdu_pending_intr_count: %d\n",
+		   dev->rx_info.total_sdio_msdu_pending_intr);
+	seq_printf(seq, "sdio_buff_full_count : %d\n",
+		   dev->rx_info.buf_full_counter);
+	seq_printf(seq, "sdio_buf_semi_full_count %d\n",
+		   dev->rx_info.buf_semi_full_counter);
+	seq_printf(seq, "sdio_unknown_intr_count: %d\n",
+		   dev->rx_info.total_sdio_unknown_intr);
+	/* RX Path Stats */
+	seq_printf(seq, "BUFFER FULL STATUS  : %d\n",
+		   dev->rx_info.buffer_full);
+	seq_printf(seq, "SEMI BUFFER FULL STATUS  : %d\n",
+		   dev->rx_info.semi_buffer_full);
+	seq_printf(seq, "MGMT BUFFER FULL STATUS  : %d\n",
+		   dev->rx_info.mgmt_buffer_full);
+	seq_printf(seq, "BUFFER FULL COUNTER  : %d\n",
+		   dev->rx_info.buf_full_counter);
+	seq_printf(seq, "BUFFER SEMI FULL COUNTER  : %d\n",
+		   dev->rx_info.buf_semi_full_counter);
+	seq_printf(seq, "MGMT BUFFER FULL COUNTER  : %d\n",
+		   dev->rx_info.mgmt_buf_full_counter);
+
+	return 0;
+}
+
+/**
+ * rsi_sdio_stats_open() - This funtion calls single open function of seq_file
+ *			   to open file and read contents from it.
+ * @inode: Pointer to the inode structure.
+ * @file: Pointer to the file structure.
+ *
+ * Return: Pointer to the opened file status: 0 on success, ENOMEM on failure.
+ */
+static int rsi_sdio_stats_open(struct inode *inode,
+			       struct file *file)
+{
+	return single_open(file, rsi_sdio_stats_read, inode->i_private);
+}
+
+/**
+ * rsi_version_read() - This function gives driver and firmware version number.
+ * @seq: Pointer to the sequence file structure.
+ * @data: Pointer to the data.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+static int rsi_version_read(struct seq_file *seq, void *data)
+{
+	struct rsi_common *common = seq->private;
+
+	common->driver_ver.major = 0;
+	common->driver_ver.minor = 1;
+	common->driver_ver.release_num = 0;
+	common->driver_ver.patch_num = 0;
+	seq_printf(seq, "Driver : %x.%d.%d.%d\nLMAC   : %d.%d.%d.%d\n",
+		   common->driver_ver.major,
+		   common->driver_ver.minor,
+		   common->driver_ver.release_num,
+		   common->driver_ver.patch_num,
+		   common->fw_ver.major,
+		   common->fw_ver.minor,
+		   common->fw_ver.release_num,
+		   common->fw_ver.patch_num);
+	return 0;
+}
+
+/**
+ * rsi_version_open() - This funtion calls single open function of seq_file to
+ *			open file and read contents from it.
+ * @inode: Pointer to the inode structure.
+ * @file: Pointer to the file structure.
+ *
+ * Return: Pointer to the opened file status: 0 on success, ENOMEM on failure.
+ */
+static int rsi_version_open(struct inode *inode,
+				 struct file *file)
+{
+	return single_open(file, rsi_version_read, inode->i_private);
+}
+
+/**
+ * rsi_stats_read() - This function return the status of the driver.
+ * @seq: Pointer to the sequence file structure.
+ * @data: Pointer to the data.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+static int rsi_stats_read(struct seq_file *seq, void *data)
+{
+	struct rsi_common *common = seq->private;
+
+	unsigned char fsm_state[][32] = {
+		"FSM_CARD_NOT_READY",
+		"FSM_BOOT_PARAMS_SENT",
+		"FSM_EEPROM_READ_MAC_ADDR",
+		"FSM_RESET_MAC_SENT",
+		"FSM_RADIO_CAPS_SENT",
+		"FSM_BB_RF_PROG_SENT",
+		"FSM_MAC_INIT_DONE"
+	};
+	seq_puts(seq, "==> RSI STA DRIVER STATUS <==\n");
+	seq_puts(seq, "DRIVER_FSM_STATE: ");
+
+	if (common->fsm_state <= FSM_MAC_INIT_DONE)
+		seq_printf(seq, "%s", fsm_state[common->fsm_state]);
+
+	seq_printf(seq, "(%d)\n\n", common->fsm_state);
+
+	/* Mgmt TX Path Stats */
+	seq_printf(seq, "total_mgmt_pkt_send : %d\n",
+		   common->tx_stats.total_tx_pkt_send[MGMT_SOFT_Q]);
+	seq_printf(seq, "total_mgmt_pkt_queued : %d\n",
+		   skb_queue_len(&common->tx_queue[4]));
+	seq_printf(seq, "total_mgmt_pkt_freed  : %d\n",
+		   common->tx_stats.total_tx_pkt_freed[MGMT_SOFT_Q]);
+
+	/* Data TX Path Stats */
+	seq_printf(seq, "total_data_vo_pkt_send: %8d\t",
+		   common->tx_stats.total_tx_pkt_send[VO_Q]);
+	seq_printf(seq, "total_data_vo_pkt_queued:  %8d\t",
+		   skb_queue_len(&common->tx_queue[0]));
+	seq_printf(seq, "total_vo_pkt_freed: %8d\n",
+		   common->tx_stats.total_tx_pkt_freed[VO_Q]);
+	seq_printf(seq, "total_data_vi_pkt_send: %8d\t",
+		   common->tx_stats.total_tx_pkt_send[VI_Q]);
+	seq_printf(seq, "total_data_vi_pkt_queued:  %8d\t",
+		   skb_queue_len(&common->tx_queue[1]));
+	seq_printf(seq, "total_vi_pkt_freed: %8d\n",
+		   common->tx_stats.total_tx_pkt_freed[VI_Q]);
+	seq_printf(seq,  "total_data_be_pkt_send: %8d\t",
+		   common->tx_stats.total_tx_pkt_send[BE_Q]);
+	seq_printf(seq, "total_data_be_pkt_queued:  %8d\t",
+		   skb_queue_len(&common->tx_queue[2]));
+	seq_printf(seq, "total_be_pkt_freed: %8d\n",
+		   common->tx_stats.total_tx_pkt_freed[BE_Q]);
+	seq_printf(seq, "total_data_bk_pkt_send: %8d\t",
+		   common->tx_stats.total_tx_pkt_send[BK_Q]);
+	seq_printf(seq, "total_data_bk_pkt_queued:  %8d\t",
+		   skb_queue_len(&common->tx_queue[3]));
+	seq_printf(seq, "total_bk_pkt_freed: %8d\n",
+		   common->tx_stats.total_tx_pkt_freed[BK_Q]);
+
+	seq_puts(seq, "\n");
+	return 0;
+}
+
+/**
+ * rsi_stats_open() - This funtion calls single open function of seq_file to
+ *		      open file and read contents from it.
+ * @inode: Pointer to the inode structure.
+ * @file: Pointer to the file structure.
+ *
+ * Return: Pointer to the opened file status: 0 on success, ENOMEM on failure.
+ */
+static int rsi_stats_open(struct inode *inode,
+			  struct file *file)
+{
+	return single_open(file, rsi_stats_read, inode->i_private);
+}
+
+/**
+ * rsi_debug_zone_read() - This function display the currently enabled debug zones.
+ * @seq: Pointer to the sequence file structure.
+ * @data: Pointer to the data.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+static int rsi_debug_zone_read(struct seq_file *seq, void *data)
+{
+	rsi_dbg(FSM_ZONE, "%x: rsi_enabled zone", rsi_zone_enabled);
+	seq_printf(seq, "The zones available are %#x\n",
+		   rsi_zone_enabled);
+	return 0;
+}
+
+/**
+ * rsi_debug_read() - This funtion calls single open function of seq_file to
+ *		      open file and read contents from it.
+ * @inode: Pointer to the inode structure.
+ * @file: Pointer to the file structure.
+ *
+ * Return: Pointer to the opened file status: 0 on success, ENOMEM on failure.
+ */
+static int rsi_debug_read(struct inode *inode,
+			  struct file *file)
+{
+	return single_open(file, rsi_debug_zone_read, inode->i_private);
+}
+
+/**
+ * rsi_debug_zone_write() - This function writes into hal queues as per user
+ *			    requirement.
+ * @filp: Pointer to the file structure.
+ * @buff: Pointer to the character buffer.
+ * @len: Length of the data to be written into buffer.
+ * @data: Pointer to the data.
+ *
+ * Return: len: Number of bytes read.
+ */
+static ssize_t rsi_debug_zone_write(struct file *filp,
+				    const char __user *buff,
+				    size_t len,
+				    loff_t *data)
+{
+	unsigned long dbg_zone;
+	int ret;
+
+	if (!len)
+		return 0;
+
+	ret = kstrtoul_from_user(buff, len, 16, &dbg_zone);
+
+	if (ret)
+		return ret;
+
+	rsi_zone_enabled = dbg_zone;
+	return len;
+}
+
+#define FOPS(fopen) { \
+	.owner = THIS_MODULE, \
+	.open = (fopen), \
+	.read = seq_read, \
+	.llseek = seq_lseek, \
+}
+
+#define FOPS_RW(fopen, fwrite) { \
+	.owner = THIS_MODULE, \
+	.open = (fopen), \
+	.read = seq_read, \
+	.llseek = seq_lseek, \
+	.write = (fwrite), \
+}
+
+static const struct rsi_dbg_files dev_debugfs_files[] = {
+	{"version", 0644, FOPS(rsi_version_open),},
+	{"stats", 0644, FOPS(rsi_stats_open),},
+	{"debug_zone", 0666, FOPS_RW(rsi_debug_read, rsi_debug_zone_write),},
+	{"sdio_stats", 0644, FOPS(rsi_sdio_stats_open),},
+};
+
+/**
+ * rsi_init_dbgfs() - This function initializes the dbgfs entry.
+ * @adapter: Pointer to the adapter structure.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+int rsi_init_dbgfs(struct rsi_hw *adapter)
+{
+	struct rsi_common *common = adapter->priv;
+	struct rsi_debugfs *dev_dbgfs;
+	char devdir[6];
+	int ii;
+	const struct rsi_dbg_files *files;
+
+	dev_dbgfs = kzalloc(sizeof(*dev_dbgfs), GFP_KERNEL);
+	adapter->dfsentry = dev_dbgfs;
+
+	snprintf(devdir, sizeof(devdir), "%s",
+		 wiphy_name(adapter->hw->wiphy));
+	dev_dbgfs->subdir = debugfs_create_dir(devdir, NULL);
+
+	if (IS_ERR(dev_dbgfs->subdir)) {
+		if (dev_dbgfs->subdir == ERR_PTR(-ENODEV))
+			rsi_dbg(ERR_ZONE,
+				"%s:Debugfs has not been mounted\n", __func__);
+		else
+			rsi_dbg(ERR_ZONE, "debugfs:%s not created\n", devdir);
+
+		adapter->dfsentry = NULL;
+		kfree(dev_dbgfs);
+		return (int)PTR_ERR(dev_dbgfs->subdir);
+	} else {
+		for (ii = 0; ii < adapter->num_debugfs_entries; ii++) {
+			files = &dev_debugfs_files[ii];
+			dev_dbgfs->rsi_files[ii] =
+			debugfs_create_file(files->name,
+					    files->perms,
+					    dev_dbgfs->subdir,
+					    common,
+					    &files->fops);
+		}
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rsi_init_dbgfs);
+
+/**
+ * rsi_remove_dbgfs() - Removes the previously created dbgfs file entries
+ *			in the reverse order of creation.
+ * @adapter: Pointer to the adapter structure.
+ *
+ * Return: None.
+ */
+void rsi_remove_dbgfs(struct rsi_hw *adapter)
+{
+	struct rsi_debugfs *dev_dbgfs = adapter->dfsentry;
+
+	if (!dev_dbgfs)
+		return;
+
+	debugfs_remove_recursive(dev_dbgfs->subdir);
+}
+EXPORT_SYMBOL_GPL(rsi_remove_dbgfs);
diff --git a/drivers/net/wireless/rsi/rsi_91x_mac80211.c b/drivers/net/wireless/rsi/rsi_91x_mac80211.c
new file mode 100644
index 000000000000..84164747ace0
--- /dev/null
+++ b/drivers/net/wireless/rsi/rsi_91x_mac80211.c
@@ -0,0 +1,1008 @@
+/**
+ * Copyright (c) 2014 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/etherdevice.h>
+#include "rsi_debugfs.h"
+#include "rsi_mgmt.h"
+#include "rsi_common.h"
+
+static const struct ieee80211_channel rsi_2ghz_channels[] = {
+	{ .band = IEEE80211_BAND_2GHZ, .center_freq = 2412,
+	  .hw_value = 1 }, /* Channel 1 */
+	{ .band = IEEE80211_BAND_2GHZ, .center_freq = 2417,
+	  .hw_value = 2 }, /* Channel 2 */
+	{ .band = IEEE80211_BAND_2GHZ, .center_freq = 2422,
+	  .hw_value = 3 }, /* Channel 3 */
+	{ .band = IEEE80211_BAND_2GHZ, .center_freq = 2427,
+	  .hw_value = 4 }, /* Channel 4 */
+	{ .band = IEEE80211_BAND_2GHZ, .center_freq = 2432,
+	  .hw_value = 5 }, /* Channel 5 */
+	{ .band = IEEE80211_BAND_2GHZ, .center_freq = 2437,
+	  .hw_value = 6 }, /* Channel 6 */
+	{ .band = IEEE80211_BAND_2GHZ, .center_freq = 2442,
+	  .hw_value = 7 }, /* Channel 7 */
+	{ .band = IEEE80211_BAND_2GHZ, .center_freq = 2447,
+	  .hw_value = 8 }, /* Channel 8 */
+	{ .band = IEEE80211_BAND_2GHZ, .center_freq = 2452,
+	  .hw_value = 9 }, /* Channel 9 */
+	{ .band = IEEE80211_BAND_2GHZ, .center_freq = 2457,
+	  .hw_value = 10 }, /* Channel 10 */
+	{ .band = IEEE80211_BAND_2GHZ, .center_freq = 2462,
+	  .hw_value = 11 }, /* Channel 11 */
+	{ .band = IEEE80211_BAND_2GHZ, .center_freq = 2467,
+	  .hw_value = 12 }, /* Channel 12 */
+	{ .band = IEEE80211_BAND_2GHZ, .center_freq = 2472,
+	  .hw_value = 13 }, /* Channel 13 */
+	{ .band = IEEE80211_BAND_2GHZ, .center_freq = 2484,
+	  .hw_value = 14 }, /* Channel 14 */
+};
+
+static const struct ieee80211_channel rsi_5ghz_channels[] = {
+	{ .band = IEEE80211_BAND_5GHZ, .center_freq = 5180,
+	  .hw_value = 36,  }, /* Channel 36 */
+	{ .band = IEEE80211_BAND_5GHZ, .center_freq = 5200,
+	  .hw_value = 40, }, /* Channel 40 */
+	{ .band = IEEE80211_BAND_5GHZ, .center_freq = 5220,
+	  .hw_value = 44, }, /* Channel 44 */
+	{ .band = IEEE80211_BAND_5GHZ, .center_freq = 5240,
+	  .hw_value = 48, }, /* Channel 48 */
+	{ .band = IEEE80211_BAND_5GHZ, .center_freq = 5260,
+	  .hw_value = 52, }, /* Channel 52 */
+	{ .band = IEEE80211_BAND_5GHZ, .center_freq = 5280,
+	  .hw_value = 56, }, /* Channel 56 */
+	{ .band = IEEE80211_BAND_5GHZ, .center_freq = 5300,
+	  .hw_value = 60, }, /* Channel 60 */
+	{ .band = IEEE80211_BAND_5GHZ, .center_freq = 5320,
+	  .hw_value = 64, }, /* Channel 64 */
+	{ .band = IEEE80211_BAND_5GHZ, .center_freq = 5500,
+	  .hw_value = 100, }, /* Channel 100 */
+	{ .band = IEEE80211_BAND_5GHZ, .center_freq = 5520,
+	  .hw_value = 104, }, /* Channel 104 */
+	{ .band = IEEE80211_BAND_5GHZ, .center_freq = 5540,
+	  .hw_value = 108, }, /* Channel 108 */
+	{ .band = IEEE80211_BAND_5GHZ, .center_freq = 5560,
+	  .hw_value = 112, }, /* Channel 112 */
+	{ .band = IEEE80211_BAND_5GHZ, .center_freq = 5580,
+	  .hw_value = 116, }, /* Channel 116 */
+	{ .band = IEEE80211_BAND_5GHZ, .center_freq = 5600,
+	  .hw_value = 120, }, /* Channel 120 */
+	{ .band = IEEE80211_BAND_5GHZ, .center_freq = 5620,
+	  .hw_value = 124, }, /* Channel 124 */
+	{ .band = IEEE80211_BAND_5GHZ, .center_freq = 5640,
+	  .hw_value = 128, }, /* Channel 128 */
+	{ .band = IEEE80211_BAND_5GHZ, .center_freq = 5660,
+	  .hw_value = 132, }, /* Channel 132 */
+	{ .band = IEEE80211_BAND_5GHZ, .center_freq = 5680,
+	  .hw_value = 136, }, /* Channel 136 */
+	{ .band = IEEE80211_BAND_5GHZ, .center_freq = 5700,
+	  .hw_value = 140, }, /* Channel 140 */
+	{ .band = IEEE80211_BAND_5GHZ, .center_freq = 5745,
+	  .hw_value = 149, }, /* Channel 149 */
+	{ .band = IEEE80211_BAND_5GHZ, .center_freq = 5765,
+	  .hw_value = 153, }, /* Channel 153 */
+	{ .band = IEEE80211_BAND_5GHZ, .center_freq = 5785,
+	  .hw_value = 157, }, /* Channel 157 */
+	{ .band = IEEE80211_BAND_5GHZ, .center_freq = 5805,
+	  .hw_value = 161, }, /* Channel 161 */
+	{ .band = IEEE80211_BAND_5GHZ, .center_freq = 5825,
+	  .hw_value = 165, }, /* Channel 165 */
+};
+
+struct ieee80211_rate rsi_rates[12] = {
+	{ .bitrate = STD_RATE_01  * 5, .hw_value = RSI_RATE_1 },
+	{ .bitrate = STD_RATE_02  * 5, .hw_value = RSI_RATE_2 },
+	{ .bitrate = STD_RATE_5_5 * 5, .hw_value = RSI_RATE_5_5 },
+	{ .bitrate = STD_RATE_11  * 5, .hw_value = RSI_RATE_11 },
+	{ .bitrate = STD_RATE_06  * 5, .hw_value = RSI_RATE_6 },
+	{ .bitrate = STD_RATE_09  * 5, .hw_value = RSI_RATE_9 },
+	{ .bitrate = STD_RATE_12  * 5, .hw_value = RSI_RATE_12 },
+	{ .bitrate = STD_RATE_18  * 5, .hw_value = RSI_RATE_18 },
+	{ .bitrate = STD_RATE_24  * 5, .hw_value = RSI_RATE_24 },
+	{ .bitrate = STD_RATE_36  * 5, .hw_value = RSI_RATE_36 },
+	{ .bitrate = STD_RATE_48  * 5, .hw_value = RSI_RATE_48 },
+	{ .bitrate = STD_RATE_54  * 5, .hw_value = RSI_RATE_54 },
+};
+
+const u16 rsi_mcsrates[8] = {
+	RSI_RATE_MCS0, RSI_RATE_MCS1, RSI_RATE_MCS2, RSI_RATE_MCS3,
+	RSI_RATE_MCS4, RSI_RATE_MCS5, RSI_RATE_MCS6, RSI_RATE_MCS7
+};
+
+/**
+ * rsi_is_cipher_wep() -  This function determines if the cipher is WEP or not.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: If cipher type is WEP, a value of 1 is returned, else 0.
+ */
+
+bool rsi_is_cipher_wep(struct rsi_common *common)
+{
+	if (((common->secinfo.gtk_cipher == WLAN_CIPHER_SUITE_WEP104) ||
+	     (common->secinfo.gtk_cipher == WLAN_CIPHER_SUITE_WEP40)) &&
+	    (!common->secinfo.ptk_cipher))
+		return true;
+	else
+		return false;
+}
+
+/**
+ * rsi_register_rates_channels() - This function registers channels and rates.
+ * @adapter: Pointer to the adapter structure.
+ * @band: Operating band to be set.
+ *
+ * Return: None.
+ */
+static void rsi_register_rates_channels(struct rsi_hw *adapter, int band)
+{
+	struct ieee80211_supported_band *sbands = &adapter->sbands[band];
+	void *channels = NULL;
+
+	if (band == IEEE80211_BAND_2GHZ) {
+		channels = kmalloc(sizeof(rsi_2ghz_channels), GFP_KERNEL);
+		memcpy(channels,
+		       rsi_2ghz_channels,
+		       sizeof(rsi_2ghz_channels));
+		sbands->band = IEEE80211_BAND_2GHZ;
+		sbands->n_channels = ARRAY_SIZE(rsi_2ghz_channels);
+		sbands->bitrates = rsi_rates;
+		sbands->n_bitrates = ARRAY_SIZE(rsi_rates);
+	} else {
+		channels = kmalloc(sizeof(rsi_5ghz_channels), GFP_KERNEL);
+		memcpy(channels,
+		       rsi_5ghz_channels,
+		       sizeof(rsi_5ghz_channels));
+		sbands->band = IEEE80211_BAND_5GHZ;
+		sbands->n_channels = ARRAY_SIZE(rsi_5ghz_channels);
+		sbands->bitrates = &rsi_rates[4];
+		sbands->n_bitrates = ARRAY_SIZE(rsi_rates) - 4;
+	}
+
+	sbands->channels = channels;
+
+	memset(&sbands->ht_cap, 0, sizeof(struct ieee80211_sta_ht_cap));
+	sbands->ht_cap.ht_supported = true;
+	sbands->ht_cap.cap = (IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
+			      IEEE80211_HT_CAP_SGI_20 |
+			      IEEE80211_HT_CAP_SGI_40);
+	sbands->ht_cap.ampdu_factor = IEEE80211_HT_MAX_AMPDU_8K;
+	sbands->ht_cap.ampdu_density = IEEE80211_HT_MPDU_DENSITY_NONE;
+	sbands->ht_cap.mcs.rx_mask[0] = 0xff;
+	sbands->ht_cap.mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED;
+	/* sbands->ht_cap.mcs.rx_highest = 0x82; */
+}
+
+/**
+ * rsi_mac80211_attach() - This function is used to de-initialize the
+ *			   Mac80211 stack.
+ * @adapter: Pointer to the adapter structure.
+ *
+ * Return: None.
+ */
+void rsi_mac80211_detach(struct rsi_hw *adapter)
+{
+	struct ieee80211_hw *hw = adapter->hw;
+
+	if (hw) {
+		ieee80211_stop_queues(hw);
+		ieee80211_unregister_hw(hw);
+		ieee80211_free_hw(hw);
+	}
+
+	rsi_remove_dbgfs(adapter);
+}
+EXPORT_SYMBOL_GPL(rsi_mac80211_detach);
+
+/**
+ * rsi_indicate_tx_status() - This function indicates the transmit status.
+ * @adapter: Pointer to the adapter structure.
+ * @skb: Pointer to the socket buffer structure.
+ * @status: Status
+ *
+ * Return: None.
+ */
+void rsi_indicate_tx_status(struct rsi_hw *adapter,
+			    struct sk_buff *skb,
+			    int status)
+{
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+
+	memset(info->driver_data, 0, IEEE80211_TX_INFO_DRIVER_DATA_SIZE);
+
+	if (!status)
+		info->flags |= IEEE80211_TX_STAT_ACK;
+
+	ieee80211_tx_status_irqsafe(adapter->hw, skb);
+}
+
+/**
+ * rsi_mac80211_tx() - This is the handler that 802.11 module calls for each
+ *		       transmitted frame.SKB contains the buffer starting
+ *		       from the IEEE 802.11 header.
+ * @hw: Pointer to the ieee80211_hw structure.
+ * @control: Pointer to the ieee80211_tx_control structure
+ * @skb: Pointer to the socket buffer structure.
+ *
+ * Return: None
+ */
+static void rsi_mac80211_tx(struct ieee80211_hw *hw,
+			    struct ieee80211_tx_control *control,
+			    struct sk_buff *skb)
+{
+	struct rsi_hw *adapter = hw->priv;
+	struct rsi_common *common = adapter->priv;
+
+	rsi_core_xmit(common, skb);
+}
+
+/**
+ * rsi_mac80211_start() - This is first handler that 802.11 module calls, since
+ *			  the driver init is complete by then, just
+ *			  returns success.
+ * @hw: Pointer to the ieee80211_hw structure.
+ *
+ * Return: 0 as success.
+ */
+static int rsi_mac80211_start(struct ieee80211_hw *hw)
+{
+	struct rsi_hw *adapter = hw->priv;
+	struct rsi_common *common = adapter->priv;
+
+	mutex_lock(&common->mutex);
+	common->iface_down = false;
+	mutex_unlock(&common->mutex);
+
+	return 0;
+}
+
+/**
+ * rsi_mac80211_stop() - This is the last handler that 802.11 module calls.
+ * @hw: Pointer to the ieee80211_hw structure.
+ *
+ * Return: None.
+ */
+static void rsi_mac80211_stop(struct ieee80211_hw *hw)
+{
+	struct rsi_hw *adapter = hw->priv;
+	struct rsi_common *common = adapter->priv;
+
+	mutex_lock(&common->mutex);
+	common->iface_down = true;
+	mutex_unlock(&common->mutex);
+}
+
+/**
+ * rsi_mac80211_add_interface() - This function is called when a netdevice
+ *				  attached to the hardware is enabled.
+ * @hw: Pointer to the ieee80211_hw structure.
+ * @vif: Pointer to the ieee80211_vif structure.
+ *
+ * Return: ret: 0 on success, negative error code on failure.
+ */
+static int rsi_mac80211_add_interface(struct ieee80211_hw *hw,
+				      struct ieee80211_vif *vif)
+{
+	struct rsi_hw *adapter = hw->priv;
+	struct rsi_common *common = adapter->priv;
+	int ret = -EOPNOTSUPP;
+
+	mutex_lock(&common->mutex);
+	switch (vif->type) {
+	case NL80211_IFTYPE_STATION:
+		if (!adapter->sc_nvifs) {
+			++adapter->sc_nvifs;
+			adapter->vifs[0] = vif;
+			ret = rsi_set_vap_capabilities(common, STA_OPMODE);
+		}
+		break;
+	default:
+		rsi_dbg(ERR_ZONE,
+			"%s: Interface type %d not supported\n", __func__,
+			vif->type);
+	}
+	mutex_unlock(&common->mutex);
+
+	return ret;
+}
+
+/**
+ * rsi_mac80211_remove_interface() - This function notifies driver that an
+ *				     interface is going down.
+ * @hw: Pointer to the ieee80211_hw structure.
+ * @vif: Pointer to the ieee80211_vif structure.
+ *
+ * Return: None.
+ */
+static void rsi_mac80211_remove_interface(struct ieee80211_hw *hw,
+					  struct ieee80211_vif *vif)
+{
+	struct rsi_hw *adapter = hw->priv;
+	struct rsi_common *common = adapter->priv;
+
+	mutex_lock(&common->mutex);
+	if (vif->type == NL80211_IFTYPE_STATION)
+		adapter->sc_nvifs--;
+
+	if (!memcmp(adapter->vifs[0], vif, sizeof(struct ieee80211_vif)))
+		adapter->vifs[0] = NULL;
+	mutex_unlock(&common->mutex);
+}
+
+/**
+ * rsi_mac80211_config() - This function is a handler for configuration
+ *			   requests. The stack calls this function to
+ *			   change hardware configuration, e.g., channel.
+ * @hw: Pointer to the ieee80211_hw structure.
+ * @changed: Changed flags set.
+ *
+ * Return: 0 on success, negative error code on failure.
+ */
+static int rsi_mac80211_config(struct ieee80211_hw *hw,
+			       u32 changed)
+{
+	struct rsi_hw *adapter = hw->priv;
+	struct rsi_common *common = adapter->priv;
+	int status = -EOPNOTSUPP;
+
+	mutex_lock(&common->mutex);
+	if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
+		struct ieee80211_channel *curchan = hw->conf.chandef.chan;
+		u16 channel = curchan->hw_value;
+
+		rsi_dbg(INFO_ZONE,
+			"%s: Set channel: %d MHz type: %d channel_no %d\n",
+			__func__, curchan->center_freq,
+			curchan->flags, channel);
+		common->band = curchan->band;
+		status = rsi_set_channel(adapter->priv, channel);
+	}
+	mutex_unlock(&common->mutex);
+
+	return status;
+}
+
+/**
+ * rsi_get_connected_channel() - This function is used to get the current
+ *				 connected channel number.
+ * @adapter: Pointer to the adapter structure.
+ *
+ * Return: Current connected AP's channel number is returned.
+ */
+u16 rsi_get_connected_channel(struct rsi_hw *adapter)
+{
+	struct ieee80211_vif *vif = adapter->vifs[0];
+	if (vif) {
+		struct ieee80211_bss_conf *bss = &vif->bss_conf;
+		struct ieee80211_channel *channel = bss->chandef.chan;
+		return channel->hw_value;
+	}
+
+	return 0;
+}
+
+/**
+ * rsi_mac80211_bss_info_changed() - This function is a handler for config
+ *				     requests related to BSS parameters that
+ *				     may vary during BSS's lifespan.
+ * @hw: Pointer to the ieee80211_hw structure.
+ * @vif: Pointer to the ieee80211_vif structure.
+ * @bss_conf: Pointer to the ieee80211_bss_conf structure.
+ * @changed: Changed flags set.
+ *
+ * Return: None.
+ */
+static void rsi_mac80211_bss_info_changed(struct ieee80211_hw *hw,
+					  struct ieee80211_vif *vif,
+					  struct ieee80211_bss_conf *bss_conf,
+					  u32 changed)
+{
+	struct rsi_hw *adapter = hw->priv;
+	struct rsi_common *common = adapter->priv;
+
+	mutex_lock(&common->mutex);
+	if (changed & BSS_CHANGED_ASSOC) {
+		rsi_dbg(INFO_ZONE, "%s: Changed Association status: %d\n",
+			__func__, bss_conf->assoc);
+		rsi_inform_bss_status(common,
+				      bss_conf->assoc,
+				      bss_conf->bssid,
+				      bss_conf->qos,
+				      bss_conf->aid);
+	}
+	mutex_unlock(&common->mutex);
+}
+
+/**
+ * rsi_mac80211_conf_filter() - This function configure the device's RX filter.
+ * @hw: Pointer to the ieee80211_hw structure.
+ * @changed: Changed flags set.
+ * @total_flags: Total initial flags set.
+ * @multicast: Multicast.
+ *
+ * Return: None.
+ */
+static void rsi_mac80211_conf_filter(struct ieee80211_hw *hw,
+				     u32 changed_flags,
+				     u32 *total_flags,
+				     u64 multicast)
+{
+	/* Not doing much here as of now */
+	*total_flags &= RSI_SUPP_FILTERS;
+}
+
+/**
+ * rsi_mac80211_conf_tx() - This function configures TX queue parameters
+ *			    (EDCF (aifs, cw_min, cw_max), bursting)
+ *			    for a hardware TX queue.
+ * @hw: Pointer to the ieee80211_hw structure
+ * @vif: Pointer to the ieee80211_vif structure.
+ * @queue: Queue number.
+ * @params: Pointer to ieee80211_tx_queue_params structure.
+ *
+ * Return: 0 on success, negative error code on failure.
+ */
+static int rsi_mac80211_conf_tx(struct ieee80211_hw *hw,
+				struct ieee80211_vif *vif, u16 queue,
+				const struct ieee80211_tx_queue_params *params)
+{
+	struct rsi_hw *adapter = hw->priv;
+	struct rsi_common *common = adapter->priv;
+	u8 idx = 0;
+
+	if (queue >= IEEE80211_NUM_ACS)
+		return 0;
+
+	rsi_dbg(INFO_ZONE,
+		"%s: Conf queue %d, aifs: %d, cwmin: %d cwmax: %d, txop: %d\n",
+		__func__, queue, params->aifs,
+		params->cw_min, params->cw_max, params->txop);
+
+	mutex_lock(&common->mutex);
+	/* Map into the way the f/w expects */
+	switch (queue) {
+	case IEEE80211_AC_VO:
+		idx = VO_Q;
+		break;
+	case IEEE80211_AC_VI:
+		idx = VI_Q;
+		break;
+	case IEEE80211_AC_BE:
+		idx = BE_Q;
+		break;
+	case IEEE80211_AC_BK:
+		idx = BK_Q;
+		break;
+	default:
+		idx = BE_Q;
+		break;
+	}
+
+	memcpy(&common->edca_params[idx],
+	       params,
+	       sizeof(struct ieee80211_tx_queue_params));
+	mutex_unlock(&common->mutex);
+
+	return 0;
+}
+
+/**
+ * rsi_hal_key_config() - This function loads the keys into the firmware.
+ * @hw: Pointer to the ieee80211_hw structure.
+ * @vif: Pointer to the ieee80211_vif structure.
+ * @key: Pointer to the ieee80211_key_conf structure.
+ *
+ * Return: status: 0 on success, -1 on failure.
+ */
+static int rsi_hal_key_config(struct ieee80211_hw *hw,
+			      struct ieee80211_vif *vif,
+			      struct ieee80211_key_conf *key)
+{
+	struct rsi_hw *adapter = hw->priv;
+	int status;
+	u8 key_type;
+
+	if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE)
+		key_type = RSI_PAIRWISE_KEY;
+	else
+		key_type = RSI_GROUP_KEY;
+
+	rsi_dbg(ERR_ZONE, "%s: Cipher 0x%x key_type: %d key_len: %d\n",
+		__func__, key->cipher, key_type, key->keylen);
+
+	if ((key->cipher == WLAN_CIPHER_SUITE_WEP104) ||
+	    (key->cipher == WLAN_CIPHER_SUITE_WEP40)) {
+		status = rsi_hal_load_key(adapter->priv,
+					  key->key,
+					  key->keylen,
+					  RSI_PAIRWISE_KEY,
+					  key->keyidx,
+					  key->cipher);
+		if (status)
+			return status;
+	}
+	return rsi_hal_load_key(adapter->priv,
+				key->key,
+				key->keylen,
+				key_type,
+				key->keyidx,
+				key->cipher);
+}
+
+/**
+ * rsi_mac80211_set_key() - This function sets type of key to be loaded.
+ * @hw: Pointer to the ieee80211_hw structure.
+ * @cmd: enum set_key_cmd.
+ * @vif: Pointer to the ieee80211_vif structure.
+ * @sta: Pointer to the ieee80211_sta structure.
+ * @key: Pointer to the ieee80211_key_conf structure.
+ *
+ * Return: status: 0 on success, negative error code on failure.
+ */
+static int rsi_mac80211_set_key(struct ieee80211_hw *hw,
+				enum set_key_cmd cmd,
+				struct ieee80211_vif *vif,
+				struct ieee80211_sta *sta,
+				struct ieee80211_key_conf *key)
+{
+	struct rsi_hw *adapter = hw->priv;
+	struct rsi_common *common = adapter->priv;
+	struct security_info *secinfo = &common->secinfo;
+	int status;
+
+	mutex_lock(&common->mutex);
+	switch (cmd) {
+	case SET_KEY:
+		secinfo->security_enable = true;
+		status = rsi_hal_key_config(hw, vif, key);
+		if (status) {
+			mutex_unlock(&common->mutex);
+			return status;
+		}
+
+		if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE)
+			secinfo->ptk_cipher = key->cipher;
+		else
+			secinfo->gtk_cipher = key->cipher;
+
+		key->hw_key_idx = key->keyidx;
+		key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
+
+		rsi_dbg(ERR_ZONE, "%s: RSI set_key\n", __func__);
+		break;
+
+	case DISABLE_KEY:
+		secinfo->security_enable = false;
+		rsi_dbg(ERR_ZONE, "%s: RSI del key\n", __func__);
+		memset(key, 0, sizeof(struct ieee80211_key_conf));
+		status = rsi_hal_key_config(hw, vif, key);
+		break;
+
+	default:
+		status = -EOPNOTSUPP;
+		break;
+	}
+
+	mutex_unlock(&common->mutex);
+	return status;
+}
+
+/**
+ * rsi_mac80211_ampdu_action() - This function selects the AMPDU action for
+ *				 the corresponding mlme_action flag and
+ *				 informs the f/w regarding this.
+ * @hw: Pointer to the ieee80211_hw structure.
+ * @vif: Pointer to the ieee80211_vif structure.
+ * @action: ieee80211_ampdu_mlme_action enum.
+ * @sta: Pointer to the ieee80211_sta structure.
+ * @tid: Traffic identifier.
+ * @ssn: Pointer to ssn value.
+ * @buf_size: Buffer size (for kernel version > 2.6.38).
+ *
+ * Return: status: 0 on success, negative error code on failure.
+ */
+static int rsi_mac80211_ampdu_action(struct ieee80211_hw *hw,
+				     struct ieee80211_vif *vif,
+				     enum ieee80211_ampdu_mlme_action action,
+				     struct ieee80211_sta *sta,
+				     unsigned short tid,
+				     unsigned short *ssn,
+				     unsigned char buf_size)
+{
+	int status = -EOPNOTSUPP;
+	struct rsi_hw *adapter = hw->priv;
+	struct rsi_common *common = adapter->priv;
+	u16 seq_no = 0;
+	u8 ii = 0;
+
+	for (ii = 0; ii < RSI_MAX_VIFS; ii++) {
+		if (vif == adapter->vifs[ii])
+			break;
+	}
+
+	mutex_lock(&common->mutex);
+	rsi_dbg(INFO_ZONE, "%s: AMPDU action %d called\n", __func__, action);
+	if (ssn != NULL)
+		seq_no = *ssn;
+
+	switch (action) {
+	case IEEE80211_AMPDU_RX_START:
+		status = rsi_send_aggregation_params_frame(common,
+							   tid,
+							   seq_no,
+							   buf_size,
+							   STA_RX_ADDBA_DONE);
+		break;
+
+	case IEEE80211_AMPDU_RX_STOP:
+		status = rsi_send_aggregation_params_frame(common,
+							   tid,
+							   0,
+							   buf_size,
+							   STA_RX_DELBA);
+		break;
+
+	case IEEE80211_AMPDU_TX_START:
+		common->vif_info[ii].seq_start = seq_no;
+		ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid);
+		break;
+
+	case IEEE80211_AMPDU_TX_STOP_CONT:
+	case IEEE80211_AMPDU_TX_STOP_FLUSH:
+	case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT:
+		status = rsi_send_aggregation_params_frame(common,
+							   tid,
+							   seq_no,
+							   buf_size,
+							   STA_TX_DELBA);
+		if (!status)
+			ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
+		break;
+
+	case IEEE80211_AMPDU_TX_OPERATIONAL:
+		status = rsi_send_aggregation_params_frame(common,
+							   tid,
+							   common->vif_info[ii]
+								.seq_start,
+							   buf_size,
+							   STA_TX_ADDBA_DONE);
+		break;
+
+	default:
+		rsi_dbg(ERR_ZONE, "%s: Uknown AMPDU action\n", __func__);
+		break;
+	}
+
+	mutex_unlock(&common->mutex);
+	return status;
+}
+
+/**
+ * rsi_mac80211_set_rts_threshold() - This function sets rts threshold value.
+ * @hw: Pointer to the ieee80211_hw structure.
+ * @value: Rts threshold value.
+ *
+ * Return: 0 on success.
+ */
+static int rsi_mac80211_set_rts_threshold(struct ieee80211_hw *hw,
+					  u32 value)
+{
+	struct rsi_hw *adapter = hw->priv;
+	struct rsi_common *common = adapter->priv;
+
+	mutex_lock(&common->mutex);
+	common->rts_threshold = value;
+	mutex_unlock(&common->mutex);
+
+	return 0;
+}
+
+/**
+ * rsi_mac80211_set_rate_mask() - This function sets bitrate_mask to be used.
+ * @hw: Pointer to the ieee80211_hw structure
+ * @vif: Pointer to the ieee80211_vif structure.
+ * @mask: Pointer to the cfg80211_bitrate_mask structure.
+ *
+ * Return: 0 on success.
+ */
+static int rsi_mac80211_set_rate_mask(struct ieee80211_hw *hw,
+				      struct ieee80211_vif *vif,
+				      const struct cfg80211_bitrate_mask *mask)
+{
+	struct rsi_hw *adapter = hw->priv;
+	struct rsi_common *common = adapter->priv;
+
+	mutex_lock(&common->mutex);
+
+	common->fixedrate_mask[IEEE80211_BAND_2GHZ] = 0;
+
+	if (mask->control[IEEE80211_BAND_2GHZ].legacy == 0xfff) {
+		common->fixedrate_mask[IEEE80211_BAND_2GHZ] =
+			(mask->control[IEEE80211_BAND_2GHZ].ht_mcs[0] << 12);
+	} else {
+		common->fixedrate_mask[IEEE80211_BAND_2GHZ] =
+			mask->control[IEEE80211_BAND_2GHZ].legacy;
+	}
+	mutex_unlock(&common->mutex);
+
+	return 0;
+}
+
+/**
+ * rsi_fill_rx_status() - This function fills rx status in
+ *			  ieee80211_rx_status structure.
+ * @hw: Pointer to the ieee80211_hw structure.
+ * @skb: Pointer to the socket buffer structure.
+ * @common: Pointer to the driver private structure.
+ * @rxs: Pointer to the ieee80211_rx_status structure.
+ *
+ * Return: None.
+ */
+static void rsi_fill_rx_status(struct ieee80211_hw *hw,
+			       struct sk_buff *skb,
+			       struct rsi_common *common,
+			       struct ieee80211_rx_status *rxs)
+{
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+	struct skb_info *rx_params = (struct skb_info *)info->driver_data;
+	struct ieee80211_hdr *hdr;
+	char rssi = rx_params->rssi;
+	u8 hdrlen = 0;
+	u8 channel = rx_params->channel;
+	s32 freq;
+
+	hdr = ((struct ieee80211_hdr *)(skb->data));
+	hdrlen = ieee80211_hdrlen(hdr->frame_control);
+
+	memset(info, 0, sizeof(struct ieee80211_tx_info));
+
+	rxs->signal = -(rssi);
+
+	if (channel <= 14)
+		rxs->band = IEEE80211_BAND_2GHZ;
+	else
+		rxs->band = IEEE80211_BAND_5GHZ;
+
+	freq = ieee80211_channel_to_frequency(channel, rxs->band);
+
+	if (freq)
+		rxs->freq = freq;
+
+	if (ieee80211_has_protected(hdr->frame_control)) {
+		if (rsi_is_cipher_wep(common)) {
+			memmove(skb->data + 4, skb->data, hdrlen);
+			skb_pull(skb, 4);
+		} else {
+			memmove(skb->data + 8, skb->data, hdrlen);
+			skb_pull(skb, 8);
+			rxs->flag |= RX_FLAG_MMIC_STRIPPED;
+		}
+		rxs->flag |= RX_FLAG_DECRYPTED;
+		rxs->flag |= RX_FLAG_IV_STRIPPED;
+	}
+}
+
+/**
+ * rsi_indicate_pkt_to_os() - This function sends recieved packet to mac80211.
+ * @common: Pointer to the driver private structure.
+ * @skb: Pointer to the socket buffer structure.
+ *
+ * Return: None.
+ */
+void rsi_indicate_pkt_to_os(struct rsi_common *common,
+			    struct sk_buff *skb)
+{
+	struct rsi_hw *adapter = common->priv;
+	struct ieee80211_hw *hw = adapter->hw;
+	struct ieee80211_rx_status *rx_status = IEEE80211_SKB_RXCB(skb);
+
+	if ((common->iface_down) || (!adapter->sc_nvifs)) {
+		dev_kfree_skb(skb);
+		return;
+	}
+
+	/* filling in the ieee80211_rx_status flags */
+	rsi_fill_rx_status(hw, skb, common, rx_status);
+
+	ieee80211_rx_irqsafe(hw, skb);
+}
+
+static void rsi_set_min_rate(struct ieee80211_hw *hw,
+			     struct ieee80211_sta *sta,
+			     struct rsi_common *common)
+{
+	u8 band = hw->conf.chandef.chan->band;
+	u8 ii;
+	u32 rate_bitmap;
+	bool matched = false;
+
+	common->bitrate_mask[band] = sta->supp_rates[band];
+
+	rate_bitmap = (common->fixedrate_mask[band] & sta->supp_rates[band]);
+
+	if (rate_bitmap & 0xfff) {
+		/* Find out the min rate */
+		for (ii = 0; ii < ARRAY_SIZE(rsi_rates); ii++) {
+			if (rate_bitmap & BIT(ii)) {
+				common->min_rate = rsi_rates[ii].hw_value;
+				matched = true;
+				break;
+			}
+		}
+	}
+
+	common->vif_info[0].is_ht = sta->ht_cap.ht_supported;
+
+	if ((common->vif_info[0].is_ht) && (rate_bitmap >> 12)) {
+		for (ii = 0; ii < ARRAY_SIZE(rsi_mcsrates); ii++) {
+			if ((rate_bitmap >> 12) & BIT(ii)) {
+				common->min_rate = rsi_mcsrates[ii];
+				matched = true;
+				break;
+			}
+		}
+	}
+
+	if (!matched)
+		common->min_rate = 0xffff;
+}
+
+/**
+ * rsi_mac80211_sta_add() - This function notifies driver about a peer getting
+ *			    connected.
+ * @hw: pointer to the ieee80211_hw structure.
+ * @vif: Pointer to the ieee80211_vif structure.
+ * @sta: Pointer to the ieee80211_sta structure.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+static int rsi_mac80211_sta_add(struct ieee80211_hw *hw,
+				struct ieee80211_vif *vif,
+				struct ieee80211_sta *sta)
+{
+	struct rsi_hw *adapter = hw->priv;
+	struct rsi_common *common = adapter->priv;
+
+	mutex_lock(&common->mutex);
+
+	rsi_set_min_rate(hw, sta, common);
+
+	if ((sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ||
+	    (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40)) {
+		common->vif_info[0].sgi = true;
+	}
+
+	if (sta->ht_cap.ht_supported)
+		ieee80211_start_tx_ba_session(sta, 0, 0);
+
+	mutex_unlock(&common->mutex);
+
+	return 0;
+}
+
+/**
+ * rsi_mac80211_sta_remove() - This function notifies driver about a peer
+ *			       getting disconnected.
+ * @hw: Pointer to the ieee80211_hw structure.
+ * @vif: Pointer to the ieee80211_vif structure.
+ * @sta: Pointer to the ieee80211_sta structure.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+static int rsi_mac80211_sta_remove(struct ieee80211_hw *hw,
+				   struct ieee80211_vif *vif,
+				   struct ieee80211_sta *sta)
+{
+	struct rsi_hw *adapter = hw->priv;
+	struct rsi_common *common = adapter->priv;
+
+	mutex_lock(&common->mutex);
+	/* Resetting all the fields to default values */
+	common->bitrate_mask[IEEE80211_BAND_2GHZ] = 0;
+	common->bitrate_mask[IEEE80211_BAND_5GHZ] = 0;
+	common->min_rate = 0xffff;
+	common->vif_info[0].is_ht = false;
+	common->vif_info[0].sgi = false;
+	common->vif_info[0].seq_start = 0;
+	common->secinfo.ptk_cipher = 0;
+	common->secinfo.gtk_cipher = 0;
+	mutex_unlock(&common->mutex);
+
+	return 0;
+}
+
+static struct ieee80211_ops mac80211_ops = {
+	.tx = rsi_mac80211_tx,
+	.start = rsi_mac80211_start,
+	.stop = rsi_mac80211_stop,
+	.add_interface = rsi_mac80211_add_interface,
+	.remove_interface = rsi_mac80211_remove_interface,
+	.config = rsi_mac80211_config,
+	.bss_info_changed = rsi_mac80211_bss_info_changed,
+	.conf_tx = rsi_mac80211_conf_tx,
+	.configure_filter = rsi_mac80211_conf_filter,
+	.set_key = rsi_mac80211_set_key,
+	.set_rts_threshold = rsi_mac80211_set_rts_threshold,
+	.set_bitrate_mask = rsi_mac80211_set_rate_mask,
+	.ampdu_action = rsi_mac80211_ampdu_action,
+	.sta_add = rsi_mac80211_sta_add,
+	.sta_remove = rsi_mac80211_sta_remove,
+};
+
+/**
+ * rsi_mac80211_attach() - This function is used to initialize Mac80211 stack.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+int rsi_mac80211_attach(struct rsi_common *common)
+{
+	int status = 0;
+	struct ieee80211_hw *hw = NULL;
+	struct wiphy *wiphy = NULL;
+	struct rsi_hw *adapter = common->priv;
+	u8 addr_mask[ETH_ALEN] = {0x0, 0x0, 0x0, 0x0, 0x0, 0x3};
+
+	rsi_dbg(INIT_ZONE, "%s: Performing mac80211 attach\n", __func__);
+
+	hw = ieee80211_alloc_hw(sizeof(struct rsi_hw), &mac80211_ops);
+	if (!hw) {
+		rsi_dbg(ERR_ZONE, "%s: ieee80211 hw alloc failed\n", __func__);
+		return -ENOMEM;
+	}
+
+	wiphy = hw->wiphy;
+
+	SET_IEEE80211_DEV(hw, adapter->device);
+
+	hw->priv = adapter;
+	adapter->hw = hw;
+
+	hw->flags = IEEE80211_HW_SIGNAL_DBM |
+		    IEEE80211_HW_HAS_RATE_CONTROL |
+		    IEEE80211_HW_AMPDU_AGGREGATION |
+		    0;
+
+	hw->queues = MAX_HW_QUEUES;
+	hw->extra_tx_headroom = RSI_NEEDED_HEADROOM;
+
+	hw->max_rates = 1;
+	hw->max_rate_tries = MAX_RETRIES;
+
+	hw->max_tx_aggregation_subframes = 6;
+	rsi_register_rates_channels(adapter, IEEE80211_BAND_2GHZ);
+	hw->rate_control_algorithm = "AARF";
+
+	SET_IEEE80211_PERM_ADDR(hw, common->mac_addr);
+	ether_addr_copy(hw->wiphy->addr_mask, addr_mask);
+
+	wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
+	wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
+	wiphy->retry_short = RETRY_SHORT;
+	wiphy->retry_long  = RETRY_LONG;
+	wiphy->frag_threshold = IEEE80211_MAX_FRAG_THRESHOLD;
+	wiphy->rts_threshold = IEEE80211_MAX_RTS_THRESHOLD;
+	wiphy->flags = 0;
+
+	wiphy->available_antennas_rx = 1;
+	wiphy->available_antennas_tx = 1;
+	wiphy->bands[IEEE80211_BAND_2GHZ] =
+		&adapter->sbands[IEEE80211_BAND_2GHZ];
+
+	status = ieee80211_register_hw(hw);
+	if (status)
+		return status;
+
+	return rsi_init_dbgfs(adapter);
+}
diff --git a/drivers/net/wireless/rsi/rsi_91x_main.c b/drivers/net/wireless/rsi/rsi_91x_main.c
new file mode 100644
index 000000000000..410a4a423578
--- /dev/null
+++ b/drivers/net/wireless/rsi/rsi_91x_main.c
@@ -0,0 +1,270 @@
+/**
+ * Copyright (c) 2014 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/module.h>
+#include <linux/firmware.h>
+#include "rsi_mgmt.h"
+#include "rsi_common.h"
+
+u32 rsi_zone_enabled = /* INFO_ZONE |
+			INIT_ZONE |
+			MGMT_TX_ZONE |
+			MGMT_RX_ZONE |
+			DATA_TX_ZONE |
+			DATA_RX_ZONE |
+			FSM_ZONE |
+			ISR_ZONE | */
+			ERR_ZONE |
+			0;
+EXPORT_SYMBOL_GPL(rsi_zone_enabled);
+
+/**
+ * rsi_prepare_skb() - This function prepares the skb.
+ * @common: Pointer to the driver private structure.
+ * @buffer: Pointer to the packet data.
+ * @pkt_len: Length of the packet.
+ * @extended_desc: Extended descriptor.
+ *
+ * Return: Successfully skb.
+ */
+static struct sk_buff *rsi_prepare_skb(struct rsi_common *common,
+				       u8 *buffer,
+				       u32 pkt_len,
+				       u8 extended_desc)
+{
+	struct ieee80211_tx_info *info;
+	struct skb_info *rx_params;
+	struct sk_buff *skb = NULL;
+	u8 payload_offset;
+
+	if (WARN(!pkt_len, "%s: Dummy pkt received", __func__))
+		return NULL;
+
+	if (pkt_len > (RSI_RCV_BUFFER_LEN * 4)) {
+		rsi_dbg(ERR_ZONE, "%s: Pkt size > max rx buf size %d\n",
+			__func__, pkt_len);
+		pkt_len = RSI_RCV_BUFFER_LEN * 4;
+	}
+
+	pkt_len -= extended_desc;
+	skb = dev_alloc_skb(pkt_len + FRAME_DESC_SZ);
+	if (skb == NULL)
+		return NULL;
+
+	payload_offset = (extended_desc + FRAME_DESC_SZ);
+	skb_put(skb, pkt_len);
+	memcpy((skb->data), (buffer + payload_offset), skb->len);
+
+	info = IEEE80211_SKB_CB(skb);
+	rx_params = (struct skb_info *)info->driver_data;
+	rx_params->rssi = rsi_get_rssi(buffer);
+	rx_params->channel = rsi_get_connected_channel(common->priv);
+
+	return skb;
+}
+
+/**
+ * rsi_read_pkt() - This function reads frames from the card.
+ * @common: Pointer to the driver private structure.
+ * @rcv_pkt_len: Received pkt length. In case of USB it is 0.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+int rsi_read_pkt(struct rsi_common *common, s32 rcv_pkt_len)
+{
+	u8 *frame_desc = NULL, extended_desc = 0;
+	u32 index, length = 0, queueno = 0;
+	u16 actual_length = 0, offset;
+	struct sk_buff *skb = NULL;
+
+	index = 0;
+	do {
+		frame_desc = &common->rx_data_pkt[index];
+		actual_length = *(u16 *)&frame_desc[0];
+		offset = *(u16 *)&frame_desc[2];
+
+		queueno = rsi_get_queueno(frame_desc, offset);
+		length = rsi_get_length(frame_desc, offset);
+		extended_desc = rsi_get_extended_desc(frame_desc, offset);
+
+		switch (queueno) {
+		case RSI_WIFI_DATA_Q:
+			skb = rsi_prepare_skb(common,
+					      (frame_desc + offset),
+					      length,
+					      extended_desc);
+			if (skb == NULL)
+				goto fail;
+
+			rsi_indicate_pkt_to_os(common, skb);
+			break;
+
+		case RSI_WIFI_MGMT_Q:
+			rsi_mgmt_pkt_recv(common, (frame_desc + offset));
+			break;
+
+		default:
+			rsi_dbg(ERR_ZONE, "%s: pkt from invalid queue: %d\n",
+				__func__,   queueno);
+			goto fail;
+		}
+
+		index  += actual_length;
+		rcv_pkt_len -= actual_length;
+	} while (rcv_pkt_len > 0);
+
+	return 0;
+fail:
+	return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(rsi_read_pkt);
+
+/**
+ * rsi_tx_scheduler_thread() - This function is a kernel thread to send the
+ *			       packets to the device.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: None.
+ */
+static void rsi_tx_scheduler_thread(struct rsi_common *common)
+{
+	struct rsi_hw *adapter = common->priv;
+	u32 timeout = EVENT_WAIT_FOREVER;
+
+	do {
+		if (adapter->determine_event_timeout)
+			timeout = adapter->determine_event_timeout(adapter);
+		rsi_wait_event(&common->tx_thread.event, timeout);
+		rsi_reset_event(&common->tx_thread.event);
+
+		if (common->init_done)
+			rsi_core_qos_processor(common);
+	} while (atomic_read(&common->tx_thread.thread_done) == 0);
+	complete_and_exit(&common->tx_thread.completion, 0);
+}
+
+/**
+ * rsi_91x_init() - This function initializes os interface operations.
+ * @void: Void.
+ *
+ * Return: Pointer to the adapter structure on success, NULL on failure .
+ */
+struct rsi_hw *rsi_91x_init(void)
+{
+	struct rsi_hw *adapter = NULL;
+	struct rsi_common *common = NULL;
+	u8 ii = 0;
+
+	adapter = kzalloc(sizeof(*adapter), GFP_KERNEL);
+	if (!adapter)
+		return NULL;
+
+	adapter->priv = kzalloc(sizeof(*common), GFP_KERNEL);
+	if (adapter->priv == NULL) {
+		rsi_dbg(ERR_ZONE, "%s: Failed in allocation of memory\n",
+			__func__);
+		kfree(adapter);
+		return NULL;
+	} else {
+		common = adapter->priv;
+		common->priv = adapter;
+	}
+
+	for (ii = 0; ii < NUM_SOFT_QUEUES; ii++)
+		skb_queue_head_init(&common->tx_queue[ii]);
+
+	rsi_init_event(&common->tx_thread.event);
+	mutex_init(&common->mutex);
+	mutex_init(&common->tx_rxlock);
+
+	if (rsi_create_kthread(common,
+			       &common->tx_thread,
+			       rsi_tx_scheduler_thread,
+			       "Tx-Thread")) {
+		rsi_dbg(ERR_ZONE, "%s: Unable to init tx thrd\n", __func__);
+		goto err;
+	}
+
+	common->init_done = true;
+	return adapter;
+
+err:
+	kfree(common);
+	kfree(adapter);
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(rsi_91x_init);
+
+/**
+ * rsi_91x_deinit() - This function de-intializes os intf operations.
+ * @adapter: Pointer to the adapter structure.
+ *
+ * Return: None.
+ */
+void rsi_91x_deinit(struct rsi_hw *adapter)
+{
+	struct rsi_common *common = adapter->priv;
+	u8 ii;
+
+	rsi_dbg(INFO_ZONE, "%s: Performing deinit os ops\n", __func__);
+
+	rsi_kill_thread(&common->tx_thread);
+
+	for (ii = 0; ii < NUM_SOFT_QUEUES; ii++)
+		skb_queue_purge(&common->tx_queue[ii]);
+
+	common->init_done = false;
+
+	kfree(common);
+	kfree(adapter->rsi_dev);
+	kfree(adapter);
+}
+EXPORT_SYMBOL_GPL(rsi_91x_deinit);
+
+/**
+ * rsi_91x_hal_module_init() - This function is invoked when the module is
+ *			       loaded into the kernel.
+ *			       It registers the client driver.
+ * @void: Void.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+static int rsi_91x_hal_module_init(void)
+{
+	rsi_dbg(INIT_ZONE, "%s: Module init called\n", __func__);
+	return 0;
+}
+
+/**
+ * rsi_91x_hal_module_exit() - This function is called at the time of
+ *			       removing/unloading the module.
+ *			       It unregisters the client driver.
+ * @void: Void.
+ *
+ * Return: None.
+ */
+static void rsi_91x_hal_module_exit(void)
+{
+	rsi_dbg(INIT_ZONE, "%s: Module exit called\n", __func__);
+}
+
+module_init(rsi_91x_hal_module_init);
+module_exit(rsi_91x_hal_module_exit);
+MODULE_AUTHOR("Redpine Signals Inc");
+MODULE_DESCRIPTION("Station driver for RSI 91x devices");
+MODULE_SUPPORTED_DEVICE("RSI-91x");
+MODULE_VERSION("0.1");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/net/wireless/rsi/rsi_91x_mgmt.c b/drivers/net/wireless/rsi/rsi_91x_mgmt.c
new file mode 100644
index 000000000000..f09c72ef55d5
--- /dev/null
+++ b/drivers/net/wireless/rsi/rsi_91x_mgmt.c
@@ -0,0 +1,1302 @@
+/**
+ * Copyright (c) 2014 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/etherdevice.h>
+#include "rsi_mgmt.h"
+#include "rsi_common.h"
+
+static struct bootup_params boot_params_20 = {
+	.magic_number = cpu_to_le16(0x5aa5),
+	.crystal_good_time = 0x0,
+	.valid = cpu_to_le32(VALID_20),
+	.reserved_for_valids = 0x0,
+	.bootup_mode_info = 0x0,
+	.digital_loop_back_params = 0x0,
+	.rtls_timestamp_en = 0x0,
+	.host_spi_intr_cfg = 0x0,
+	.device_clk_info = {{
+		.pll_config_g = {
+			.tapll_info_g = {
+				.pll_reg_1 = cpu_to_le16((TA_PLL_N_VAL_20 << 8)|
+					      (TA_PLL_M_VAL_20)),
+				.pll_reg_2 = cpu_to_le16(TA_PLL_P_VAL_20),
+			},
+			.pll960_info_g = {
+				.pll_reg_1 = cpu_to_le16((PLL960_P_VAL_20 << 8)|
+							 (PLL960_N_VAL_20)),
+				.pll_reg_2 = cpu_to_le16(PLL960_M_VAL_20),
+				.pll_reg_3 = 0x0,
+			},
+			.afepll_info_g = {
+				.pll_reg = cpu_to_le16(0x9f0),
+			}
+		},
+		.switch_clk_g = {
+			.switch_clk_info = cpu_to_le16(BIT(3)),
+			.bbp_lmac_clk_reg_val = cpu_to_le16(0x121),
+			.umac_clock_reg_config = 0x0,
+			.qspi_uart_clock_reg_config = 0x0
+		}
+	},
+	{
+		.pll_config_g = {
+			.tapll_info_g = {
+				.pll_reg_1 = cpu_to_le16((TA_PLL_N_VAL_20 << 8)|
+							 (TA_PLL_M_VAL_20)),
+				.pll_reg_2 = cpu_to_le16(TA_PLL_P_VAL_20),
+			},
+			.pll960_info_g = {
+				.pll_reg_1 = cpu_to_le16((PLL960_P_VAL_20 << 8)|
+							 (PLL960_N_VAL_20)),
+				.pll_reg_2 = cpu_to_le16(PLL960_M_VAL_20),
+				.pll_reg_3 = 0x0,
+			},
+			.afepll_info_g = {
+				.pll_reg = cpu_to_le16(0x9f0),
+			}
+		},
+		.switch_clk_g = {
+			.switch_clk_info = 0x0,
+			.bbp_lmac_clk_reg_val = 0x0,
+			.umac_clock_reg_config = 0x0,
+			.qspi_uart_clock_reg_config = 0x0
+		}
+	},
+	{
+		.pll_config_g = {
+			.tapll_info_g = {
+				.pll_reg_1 = cpu_to_le16((TA_PLL_N_VAL_20 << 8)|
+							 (TA_PLL_M_VAL_20)),
+				.pll_reg_2 = cpu_to_le16(TA_PLL_P_VAL_20),
+			},
+			.pll960_info_g = {
+				.pll_reg_1 = cpu_to_le16((PLL960_P_VAL_20 << 8)|
+							 (PLL960_N_VAL_20)),
+				.pll_reg_2 = cpu_to_le16(PLL960_M_VAL_20),
+				.pll_reg_3 = 0x0,
+			},
+			.afepll_info_g = {
+				.pll_reg = cpu_to_le16(0x9f0),
+			}
+		},
+		.switch_clk_g = {
+			.switch_clk_info = 0x0,
+			.bbp_lmac_clk_reg_val = 0x0,
+			.umac_clock_reg_config = 0x0,
+			.qspi_uart_clock_reg_config = 0x0
+		}
+	} },
+	.buckboost_wakeup_cnt = 0x0,
+	.pmu_wakeup_wait = 0x0,
+	.shutdown_wait_time = 0x0,
+	.pmu_slp_clkout_sel = 0x0,
+	.wdt_prog_value = 0x0,
+	.wdt_soc_rst_delay = 0x0,
+	.dcdc_operation_mode = 0x0,
+	.soc_reset_wait_cnt = 0x0
+};
+
+static struct bootup_params boot_params_40 = {
+	.magic_number = cpu_to_le16(0x5aa5),
+	.crystal_good_time = 0x0,
+	.valid = cpu_to_le32(VALID_40),
+	.reserved_for_valids = 0x0,
+	.bootup_mode_info = 0x0,
+	.digital_loop_back_params = 0x0,
+	.rtls_timestamp_en = 0x0,
+	.host_spi_intr_cfg = 0x0,
+	.device_clk_info = {{
+		.pll_config_g = {
+			.tapll_info_g = {
+				.pll_reg_1 = cpu_to_le16((TA_PLL_N_VAL_40 << 8)|
+							 (TA_PLL_M_VAL_40)),
+				.pll_reg_2 = cpu_to_le16(TA_PLL_P_VAL_40),
+			},
+			.pll960_info_g = {
+				.pll_reg_1 = cpu_to_le16((PLL960_P_VAL_40 << 8)|
+							 (PLL960_N_VAL_40)),
+				.pll_reg_2 = cpu_to_le16(PLL960_M_VAL_40),
+				.pll_reg_3 = 0x0,
+			},
+			.afepll_info_g = {
+				.pll_reg = cpu_to_le16(0x9f0),
+			}
+		},
+		.switch_clk_g = {
+			.switch_clk_info = cpu_to_le16(0x09),
+			.bbp_lmac_clk_reg_val = cpu_to_le16(0x1121),
+			.umac_clock_reg_config = cpu_to_le16(0x48),
+			.qspi_uart_clock_reg_config = 0x0
+		}
+	},
+	{
+		.pll_config_g = {
+			.tapll_info_g = {
+				.pll_reg_1 = cpu_to_le16((TA_PLL_N_VAL_40 << 8)|
+							 (TA_PLL_M_VAL_40)),
+				.pll_reg_2 = cpu_to_le16(TA_PLL_P_VAL_40),
+			},
+			.pll960_info_g = {
+				.pll_reg_1 = cpu_to_le16((PLL960_P_VAL_40 << 8)|
+							 (PLL960_N_VAL_40)),
+				.pll_reg_2 = cpu_to_le16(PLL960_M_VAL_40),
+				.pll_reg_3 = 0x0,
+			},
+			.afepll_info_g = {
+				.pll_reg = cpu_to_le16(0x9f0),
+			}
+		},
+		.switch_clk_g = {
+			.switch_clk_info = 0x0,
+			.bbp_lmac_clk_reg_val = 0x0,
+			.umac_clock_reg_config = 0x0,
+			.qspi_uart_clock_reg_config = 0x0
+		}
+	},
+	{
+		.pll_config_g = {
+			.tapll_info_g = {
+				.pll_reg_1 = cpu_to_le16((TA_PLL_N_VAL_40 << 8)|
+							 (TA_PLL_M_VAL_40)),
+				.pll_reg_2 = cpu_to_le16(TA_PLL_P_VAL_40),
+			},
+			.pll960_info_g = {
+				.pll_reg_1 = cpu_to_le16((PLL960_P_VAL_40 << 8)|
+							 (PLL960_N_VAL_40)),
+				.pll_reg_2 = cpu_to_le16(PLL960_M_VAL_40),
+				.pll_reg_3 = 0x0,
+			},
+			.afepll_info_g = {
+				.pll_reg = cpu_to_le16(0x9f0),
+			}
+		},
+		.switch_clk_g = {
+			.switch_clk_info = 0x0,
+			.bbp_lmac_clk_reg_val = 0x0,
+			.umac_clock_reg_config = 0x0,
+			.qspi_uart_clock_reg_config = 0x0
+		}
+	} },
+	.buckboost_wakeup_cnt = 0x0,
+	.pmu_wakeup_wait = 0x0,
+	.shutdown_wait_time = 0x0,
+	.pmu_slp_clkout_sel = 0x0,
+	.wdt_prog_value = 0x0,
+	.wdt_soc_rst_delay = 0x0,
+	.dcdc_operation_mode = 0x0,
+	.soc_reset_wait_cnt = 0x0
+};
+
+static u16 mcs[] = {13, 26, 39, 52, 78, 104, 117, 130};
+
+/**
+ * rsi_set_default_parameters() - This function sets default parameters.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: none
+ */
+static void rsi_set_default_parameters(struct rsi_common *common)
+{
+	common->band = IEEE80211_BAND_2GHZ;
+	common->channel_width = BW_20MHZ;
+	common->rts_threshold = IEEE80211_MAX_RTS_THRESHOLD;
+	common->channel = 1;
+	common->min_rate = 0xffff;
+	common->fsm_state = FSM_CARD_NOT_READY;
+	common->iface_down = true;
+}
+
+/**
+ * rsi_set_contention_vals() - This function sets the contention values for the
+ *			       backoff procedure.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: None.
+ */
+static void rsi_set_contention_vals(struct rsi_common *common)
+{
+	u8 ii = 0;
+
+	for (; ii < NUM_EDCA_QUEUES; ii++) {
+		common->tx_qinfo[ii].wme_params =
+			(((common->edca_params[ii].cw_min / 2) +
+			  (common->edca_params[ii].aifs)) *
+			  WMM_SHORT_SLOT_TIME + SIFS_DURATION);
+		common->tx_qinfo[ii].weight = common->tx_qinfo[ii].wme_params;
+		common->tx_qinfo[ii].pkt_contended = 0;
+	}
+}
+
+/**
+ * rsi_send_internal_mgmt_frame() - This function sends management frames to
+ *				    firmware.Also schedules packet to queue
+ *				    for transmission.
+ * @common: Pointer to the driver private structure.
+ * @skb: Pointer to the socket buffer structure.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+static int rsi_send_internal_mgmt_frame(struct rsi_common *common,
+					struct sk_buff *skb)
+{
+	struct skb_info *tx_params;
+
+	if (skb == NULL) {
+		rsi_dbg(ERR_ZONE, "%s: Unable to allocate skb\n", __func__);
+		return -ENOMEM;
+	}
+	tx_params = (struct skb_info *)&IEEE80211_SKB_CB(skb)->driver_data;
+	tx_params->flags |= INTERNAL_MGMT_PKT;
+	skb_queue_tail(&common->tx_queue[MGMT_SOFT_Q], skb);
+	rsi_set_event(&common->tx_thread.event);
+	return 0;
+}
+
+/**
+ * rsi_load_radio_caps() - This function is used to send radio capabilities
+ *			   values to firmware.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: 0 on success, corresponding negative error code on failure.
+ */
+static int rsi_load_radio_caps(struct rsi_common *common)
+{
+	struct rsi_radio_caps *radio_caps;
+	struct rsi_hw *adapter = common->priv;
+	struct ieee80211_hw *hw = adapter->hw;
+	u16 inx = 0;
+	u8 ii;
+	u8 radio_id = 0;
+	u16 gc[20] = {0xf0, 0xf0, 0xf0, 0xf0,
+		      0xf0, 0xf0, 0xf0, 0xf0,
+		      0xf0, 0xf0, 0xf0, 0xf0,
+		      0xf0, 0xf0, 0xf0, 0xf0,
+		      0xf0, 0xf0, 0xf0, 0xf0};
+	struct ieee80211_conf *conf = &hw->conf;
+	struct sk_buff *skb;
+
+	rsi_dbg(INFO_ZONE, "%s: Sending rate symbol req frame\n", __func__);
+
+	skb = dev_alloc_skb(sizeof(struct rsi_radio_caps));
+
+	if (!skb) {
+		rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n",
+			__func__);
+		return -ENOMEM;
+	}
+
+	memset(skb->data, 0, sizeof(struct rsi_radio_caps));
+	radio_caps = (struct rsi_radio_caps *)skb->data;
+
+	radio_caps->desc_word[1] = cpu_to_le16(RADIO_CAPABILITIES);
+	radio_caps->desc_word[4] = cpu_to_le16(RSI_RF_TYPE << 8);
+
+	if (common->channel_width == BW_40MHZ) {
+		radio_caps->desc_word[7] |= cpu_to_le16(RSI_LMAC_CLOCK_80MHZ);
+		radio_caps->desc_word[7] |= cpu_to_le16(RSI_ENABLE_40MHZ);
+		if (common->channel_width) {
+			radio_caps->desc_word[5] =
+				cpu_to_le16(common->channel_width << 12);
+			radio_caps->desc_word[5] |= cpu_to_le16(FULL40M_ENABLE);
+		}
+
+		if (conf_is_ht40_minus(conf)) {
+			radio_caps->desc_word[5] = 0;
+			radio_caps->desc_word[5] |=
+				cpu_to_le16(LOWER_20_ENABLE);
+			radio_caps->desc_word[5] |=
+				cpu_to_le16(LOWER_20_ENABLE >> 12);
+		}
+
+		if (conf_is_ht40_plus(conf)) {
+			radio_caps->desc_word[5] = 0;
+			radio_caps->desc_word[5] |=
+				cpu_to_le16(UPPER_20_ENABLE);
+			radio_caps->desc_word[5] |=
+				cpu_to_le16(UPPER_20_ENABLE >> 12);
+		}
+	}
+
+	radio_caps->desc_word[7] |= cpu_to_le16(radio_id << 8);
+
+	for (ii = 0; ii < MAX_HW_QUEUES; ii++) {
+		radio_caps->qos_params[ii].cont_win_min_q = cpu_to_le16(3);
+		radio_caps->qos_params[ii].cont_win_max_q = cpu_to_le16(0x3f);
+		radio_caps->qos_params[ii].aifsn_val_q = cpu_to_le16(2);
+		radio_caps->qos_params[ii].txop_q = 0;
+	}
+
+	for (ii = 0; ii < MAX_HW_QUEUES - 4; ii++) {
+		radio_caps->qos_params[ii].cont_win_min_q =
+			cpu_to_le16(common->edca_params[ii].cw_min);
+		radio_caps->qos_params[ii].cont_win_max_q =
+			cpu_to_le16(common->edca_params[ii].cw_max);
+		radio_caps->qos_params[ii].aifsn_val_q =
+			cpu_to_le16((common->edca_params[ii].aifs) << 8);
+		radio_caps->qos_params[ii].txop_q =
+			cpu_to_le16(common->edca_params[ii].txop);
+	}
+
+	memcpy(&common->rate_pwr[0], &gc[0], 40);
+	for (ii = 0; ii < 20; ii++)
+		radio_caps->gcpd_per_rate[inx++] =
+			cpu_to_le16(common->rate_pwr[ii]  & 0x00FF);
+
+	radio_caps->desc_word[0] = cpu_to_le16((sizeof(struct rsi_radio_caps) -
+						FRAME_DESC_SZ) |
+					       (RSI_WIFI_MGMT_Q << 12));
+
+
+	skb_put(skb, (sizeof(struct rsi_radio_caps)));
+
+	return rsi_send_internal_mgmt_frame(common, skb);
+}
+
+/**
+ * rsi_mgmt_pkt_to_core() - This function is the entry point for Mgmt module.
+ * @common: Pointer to the driver private structure.
+ * @msg: Pointer to received packet.
+ * @msg_len: Length of the recieved packet.
+ * @type: Type of recieved packet.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+static int rsi_mgmt_pkt_to_core(struct rsi_common *common,
+				u8 *msg,
+				s32 msg_len,
+				u8 type)
+{
+	struct rsi_hw *adapter = common->priv;
+	struct ieee80211_tx_info *info;
+	struct skb_info *rx_params;
+	u8 pad_bytes = msg[4];
+	u8 pkt_recv;
+	struct sk_buff *skb;
+	char *buffer;
+
+	if (type == RX_DOT11_MGMT) {
+		if (!adapter->sc_nvifs)
+			return -ENOLINK;
+
+		msg_len -= pad_bytes;
+		if ((msg_len <= 0) || (!msg)) {
+			rsi_dbg(MGMT_RX_ZONE, "Invalid rx msg of len = %d\n",
+				__func__, msg_len);
+			return -EINVAL;
+		}
+
+		skb = dev_alloc_skb(msg_len);
+		if (!skb) {
+			rsi_dbg(ERR_ZONE, "%s: Failed to allocate skb\n",
+				__func__);
+			return -ENOMEM;
+		}
+
+		buffer = skb_put(skb, msg_len);
+
+		memcpy(buffer,
+		       (u8 *)(msg +  FRAME_DESC_SZ + pad_bytes),
+		       msg_len);
+
+		pkt_recv = buffer[0];
+
+		info = IEEE80211_SKB_CB(skb);
+		rx_params = (struct skb_info *)info->driver_data;
+		rx_params->rssi = rsi_get_rssi(msg);
+		rx_params->channel = rsi_get_channel(msg);
+		rsi_indicate_pkt_to_os(common, skb);
+	} else {
+		rsi_dbg(MGMT_TX_ZONE, "%s: Internal Packet\n", __func__);
+	}
+
+	return 0;
+}
+
+/**
+ * rsi_hal_send_sta_notify_frame() - This function sends the station notify
+ *				     frame to firmware.
+ * @common: Pointer to the driver private structure.
+ * @opmode: Operating mode of device.
+ * @notify_event: Notification about station connection.
+ * @bssid: bssid.
+ * @qos_enable: Qos is enabled.
+ * @aid: Aid (unique for all STA).
+ *
+ * Return: status: 0 on success, corresponding negative error code on failure.
+ */
+static int rsi_hal_send_sta_notify_frame(struct rsi_common *common,
+					 u8 opmode,
+					 u8 notify_event,
+					 const unsigned char *bssid,
+					 u8 qos_enable,
+					 u16 aid)
+{
+	struct sk_buff *skb = NULL;
+	struct rsi_peer_notify *peer_notify;
+	u16 vap_id = 0;
+	int status;
+
+	rsi_dbg(MGMT_TX_ZONE, "%s: Sending sta notify frame\n", __func__);
+
+	skb = dev_alloc_skb(sizeof(struct rsi_peer_notify));
+
+	if (!skb) {
+		rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n",
+			__func__);
+		return -ENOMEM;
+	}
+
+	memset(skb->data, 0, sizeof(struct rsi_peer_notify));
+	peer_notify = (struct rsi_peer_notify *)skb->data;
+
+	peer_notify->command = cpu_to_le16(opmode << 1);
+
+	switch (notify_event) {
+	case STA_CONNECTED:
+		peer_notify->command |= cpu_to_le16(RSI_ADD_PEER);
+		break;
+	case STA_DISCONNECTED:
+		peer_notify->command |= cpu_to_le16(RSI_DELETE_PEER);
+		break;
+	default:
+		break;
+	}
+
+	peer_notify->command |= cpu_to_le16((aid & 0xfff) << 4);
+	ether_addr_copy(peer_notify->mac_addr, bssid);
+
+	peer_notify->sta_flags = cpu_to_le32((qos_enable) ? 1 : 0);
+
+	peer_notify->desc_word[0] =
+		cpu_to_le16((sizeof(struct rsi_peer_notify) - FRAME_DESC_SZ) |
+			    (RSI_WIFI_MGMT_Q << 12));
+	peer_notify->desc_word[1] = cpu_to_le16(PEER_NOTIFY);
+	peer_notify->desc_word[7] |= cpu_to_le16(vap_id << 8);
+
+	skb_put(skb, sizeof(struct rsi_peer_notify));
+
+	status = rsi_send_internal_mgmt_frame(common, skb);
+
+	if (!status && qos_enable) {
+		rsi_set_contention_vals(common);
+		status = rsi_load_radio_caps(common);
+	}
+	return status;
+}
+
+/**
+ * rsi_send_aggregation_params_frame() - This function sends the ampdu
+ *					 indication frame to firmware.
+ * @common: Pointer to the driver private structure.
+ * @tid: traffic identifier.
+ * @ssn: ssn.
+ * @buf_size: buffer size.
+ * @event: notification about station connection.
+ *
+ * Return: 0 on success, corresponding negative error code on failure.
+ */
+int rsi_send_aggregation_params_frame(struct rsi_common *common,
+				      u16 tid,
+				      u16 ssn,
+				      u8 buf_size,
+				      u8 event)
+{
+	struct sk_buff *skb = NULL;
+	struct rsi_mac_frame *mgmt_frame;
+	u8 peer_id = 0;
+
+	skb = dev_alloc_skb(FRAME_DESC_SZ);
+
+	if (!skb) {
+		rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n",
+			__func__);
+		return -ENOMEM;
+	}
+
+	memset(skb->data, 0, FRAME_DESC_SZ);
+	mgmt_frame = (struct rsi_mac_frame *)skb->data;
+
+	rsi_dbg(MGMT_TX_ZONE, "%s: Sending AMPDU indication frame\n", __func__);
+
+	mgmt_frame->desc_word[0] = cpu_to_le16(RSI_WIFI_MGMT_Q << 12);
+	mgmt_frame->desc_word[1] = cpu_to_le16(AMPDU_IND);
+
+	if (event == STA_TX_ADDBA_DONE) {
+		mgmt_frame->desc_word[4] = cpu_to_le16(ssn);
+		mgmt_frame->desc_word[5] = cpu_to_le16(buf_size);
+		mgmt_frame->desc_word[7] =
+		cpu_to_le16((tid | (START_AMPDU_AGGR << 4) | (peer_id << 8)));
+	} else if (event == STA_RX_ADDBA_DONE) {
+		mgmt_frame->desc_word[4] = cpu_to_le16(ssn);
+		mgmt_frame->desc_word[7] = cpu_to_le16(tid |
+						       (START_AMPDU_AGGR << 4) |
+						       (RX_BA_INDICATION << 5) |
+						       (peer_id << 8));
+	} else if (event == STA_TX_DELBA) {
+		mgmt_frame->desc_word[7] = cpu_to_le16(tid |
+						       (STOP_AMPDU_AGGR << 4) |
+						       (peer_id << 8));
+	} else if (event == STA_RX_DELBA) {
+		mgmt_frame->desc_word[7] = cpu_to_le16(tid |
+						       (STOP_AMPDU_AGGR << 4) |
+						       (RX_BA_INDICATION << 5) |
+						       (peer_id << 8));
+	}
+
+	skb_put(skb, FRAME_DESC_SZ);
+
+	return rsi_send_internal_mgmt_frame(common, skb);
+}
+
+/**
+ * rsi_program_bb_rf() - This function starts base band and RF programming.
+ *			 This is called after initial configurations are done.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: 0 on success, corresponding negative error code on failure.
+ */
+static int rsi_program_bb_rf(struct rsi_common *common)
+{
+	struct sk_buff *skb;
+	struct rsi_mac_frame *mgmt_frame;
+
+	rsi_dbg(MGMT_TX_ZONE, "%s: Sending program BB/RF frame\n", __func__);
+
+	skb = dev_alloc_skb(FRAME_DESC_SZ);
+	if (!skb) {
+		rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n",
+			__func__);
+		return -ENOMEM;
+	}
+
+	memset(skb->data, 0, FRAME_DESC_SZ);
+	mgmt_frame = (struct rsi_mac_frame *)skb->data;
+
+	mgmt_frame->desc_word[0] = cpu_to_le16(RSI_WIFI_MGMT_Q << 12);
+	mgmt_frame->desc_word[1] = cpu_to_le16(BBP_PROG_IN_TA);
+	mgmt_frame->desc_word[4] = cpu_to_le16(common->endpoint << 8);
+
+	if (common->rf_reset) {
+		mgmt_frame->desc_word[7] =  cpu_to_le16(RF_RESET_ENABLE);
+		rsi_dbg(MGMT_TX_ZONE, "%s: ===> RF RESET REQUEST SENT <===\n",
+			__func__);
+		common->rf_reset = 0;
+	}
+	common->bb_rf_prog_count = 1;
+	mgmt_frame->desc_word[7] |= cpu_to_le16(PUT_BBP_RESET |
+				     BBP_REG_WRITE | (RSI_RF_TYPE << 4));
+	skb_put(skb, FRAME_DESC_SZ);
+
+	return rsi_send_internal_mgmt_frame(common, skb);
+}
+
+/**
+ * rsi_set_vap_capabilities() - This function send vap capability to firmware.
+ * @common: Pointer to the driver private structure.
+ * @opmode: Operating mode of device.
+ *
+ * Return: 0 on success, corresponding negative error code on failure.
+ */
+int rsi_set_vap_capabilities(struct rsi_common *common, enum opmode mode)
+{
+	struct sk_buff *skb = NULL;
+	struct rsi_vap_caps *vap_caps;
+	u16 vap_id = 0;
+
+	rsi_dbg(MGMT_TX_ZONE, "%s: Sending VAP capabilities frame\n", __func__);
+
+	skb = dev_alloc_skb(sizeof(struct rsi_vap_caps));
+	if (!skb) {
+		rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n",
+			__func__);
+		return -ENOMEM;
+	}
+
+	memset(skb->data, 0, sizeof(struct rsi_vap_caps));
+	vap_caps = (struct rsi_vap_caps *)skb->data;
+
+	vap_caps->desc_word[0] = cpu_to_le16((sizeof(struct rsi_vap_caps) -
+					     FRAME_DESC_SZ) |
+					     (RSI_WIFI_MGMT_Q << 12));
+	vap_caps->desc_word[1] = cpu_to_le16(VAP_CAPABILITIES);
+	vap_caps->desc_word[4] = cpu_to_le16(mode |
+					     (common->channel_width << 8));
+	vap_caps->desc_word[7] = cpu_to_le16((vap_id << 8) |
+					     (common->mac_id << 4) |
+					     common->radio_id);
+
+	memcpy(vap_caps->mac_addr, common->mac_addr, IEEE80211_ADDR_LEN);
+	vap_caps->keep_alive_period = cpu_to_le16(90);
+	vap_caps->frag_threshold = cpu_to_le16(IEEE80211_MAX_FRAG_THRESHOLD);
+
+	vap_caps->rts_threshold = cpu_to_le16(common->rts_threshold);
+	vap_caps->default_mgmt_rate = 0;
+	if (conf_is_ht40(&common->priv->hw->conf)) {
+		vap_caps->default_ctrl_rate =
+				cpu_to_le32(RSI_RATE_6 | FULL40M_ENABLE << 16);
+	} else {
+		vap_caps->default_ctrl_rate = cpu_to_le32(RSI_RATE_6);
+	}
+	vap_caps->default_data_rate = 0;
+	vap_caps->beacon_interval = cpu_to_le16(200);
+	vap_caps->dtim_period = cpu_to_le16(4);
+
+	skb_put(skb, sizeof(*vap_caps));
+
+	return rsi_send_internal_mgmt_frame(common, skb);
+}
+
+/**
+ * rsi_hal_load_key() - This function is used to load keys within the firmware.
+ * @common: Pointer to the driver private structure.
+ * @data: Pointer to the key data.
+ * @key_len: Key length to be loaded.
+ * @key_type: Type of key: GROUP/PAIRWISE.
+ * @key_id: Key index.
+ * @cipher: Type of cipher used.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+int rsi_hal_load_key(struct rsi_common *common,
+		     u8 *data,
+		     u16 key_len,
+		     u8 key_type,
+		     u8 key_id,
+		     u32 cipher)
+{
+	struct sk_buff *skb = NULL;
+	struct rsi_set_key *set_key;
+	u16 key_descriptor = 0;
+
+	rsi_dbg(MGMT_TX_ZONE, "%s: Sending load key frame\n", __func__);
+
+	skb = dev_alloc_skb(sizeof(struct rsi_set_key));
+	if (!skb) {
+		rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n",
+			__func__);
+		return -ENOMEM;
+	}
+
+	memset(skb->data, 0, sizeof(struct rsi_set_key));
+	set_key = (struct rsi_set_key *)skb->data;
+
+	if ((cipher == WLAN_CIPHER_SUITE_WEP40) ||
+	    (cipher == WLAN_CIPHER_SUITE_WEP104)) {
+		key_len += 1;
+		key_descriptor |= BIT(2);
+		if (key_len >= 13)
+			key_descriptor |= BIT(3);
+	} else if (cipher != KEY_TYPE_CLEAR) {
+		key_descriptor |= BIT(4);
+		if (key_type == RSI_PAIRWISE_KEY)
+			key_id = 0;
+		if (cipher == WLAN_CIPHER_SUITE_TKIP)
+			key_descriptor |= BIT(5);
+	}
+	key_descriptor |= (key_type | BIT(13) | (key_id << 14));
+
+	set_key->desc_word[0] = cpu_to_le16((sizeof(struct rsi_set_key) -
+					    FRAME_DESC_SZ) |
+					    (RSI_WIFI_MGMT_Q << 12));
+	set_key->desc_word[1] = cpu_to_le16(SET_KEY_REQ);
+	set_key->desc_word[4] = cpu_to_le16(key_descriptor);
+
+	if ((cipher == WLAN_CIPHER_SUITE_WEP40) ||
+	    (cipher == WLAN_CIPHER_SUITE_WEP104)) {
+		memcpy(&set_key->key[key_id][1],
+		       data,
+		       key_len * 2);
+	} else {
+		memcpy(&set_key->key[0][0], data, key_len);
+	}
+
+	memcpy(set_key->tx_mic_key, &data[16], 8);
+	memcpy(set_key->rx_mic_key, &data[24], 8);
+
+	skb_put(skb, sizeof(struct rsi_set_key));
+
+	return rsi_send_internal_mgmt_frame(common, skb);
+}
+
+/*
+ * rsi_load_bootup_params() - This function send bootup params to the firmware.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: 0 on success, corresponding error code on failure.
+ */
+static u8 rsi_load_bootup_params(struct rsi_common *common)
+{
+	struct sk_buff *skb;
+	struct rsi_boot_params *boot_params;
+
+	rsi_dbg(MGMT_TX_ZONE, "%s: Sending boot params frame\n", __func__);
+	skb = dev_alloc_skb(sizeof(struct rsi_boot_params));
+	if (!skb) {
+		rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n",
+			__func__);
+		return -ENOMEM;
+	}
+
+	memset(skb->data, 0, sizeof(struct rsi_boot_params));
+	boot_params = (struct rsi_boot_params *)skb->data;
+
+	rsi_dbg(MGMT_TX_ZONE, "%s:\n", __func__);
+
+	if (common->channel_width == BW_40MHZ) {
+		memcpy(&boot_params->bootup_params,
+		       &boot_params_40,
+		       sizeof(struct bootup_params));
+		rsi_dbg(MGMT_TX_ZONE, "%s: Packet 40MHZ <=== %d\n", __func__,
+			UMAC_CLK_40BW);
+		boot_params->desc_word[7] = cpu_to_le16(UMAC_CLK_40BW);
+	} else {
+		memcpy(&boot_params->bootup_params,
+		       &boot_params_20,
+		       sizeof(struct bootup_params));
+		if (boot_params_20.valid != cpu_to_le32(VALID_20)) {
+			boot_params->desc_word[7] = cpu_to_le16(UMAC_CLK_20BW);
+			rsi_dbg(MGMT_TX_ZONE,
+				"%s: Packet 20MHZ <=== %d\n", __func__,
+				UMAC_CLK_20BW);
+		} else {
+			boot_params->desc_word[7] = cpu_to_le16(UMAC_CLK_40MHZ);
+			rsi_dbg(MGMT_TX_ZONE,
+				"%s: Packet 20MHZ <=== %d\n", __func__,
+				UMAC_CLK_40MHZ);
+		}
+	}
+
+	/**
+	 * Bit{0:11} indicates length of the Packet
+	 * Bit{12:15} indicates host queue number
+	 */
+	boot_params->desc_word[0] = cpu_to_le16(sizeof(struct bootup_params) |
+				    (RSI_WIFI_MGMT_Q << 12));
+	boot_params->desc_word[1] = cpu_to_le16(BOOTUP_PARAMS_REQUEST);
+
+	skb_put(skb, sizeof(struct rsi_boot_params));
+
+	return rsi_send_internal_mgmt_frame(common, skb);
+}
+
+/**
+ * rsi_send_reset_mac() - This function prepares reset MAC request and sends an
+ *			  internal management frame to indicate it to firmware.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: 0 on success, corresponding error code on failure.
+ */
+static int rsi_send_reset_mac(struct rsi_common *common)
+{
+	struct sk_buff *skb;
+	struct rsi_mac_frame *mgmt_frame;
+
+	rsi_dbg(MGMT_TX_ZONE, "%s: Sending reset MAC frame\n", __func__);
+
+	skb = dev_alloc_skb(FRAME_DESC_SZ);
+	if (!skb) {
+		rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n",
+			__func__);
+		return -ENOMEM;
+	}
+
+	memset(skb->data, 0, FRAME_DESC_SZ);
+	mgmt_frame = (struct rsi_mac_frame *)skb->data;
+
+	mgmt_frame->desc_word[0] = cpu_to_le16(RSI_WIFI_MGMT_Q << 12);
+	mgmt_frame->desc_word[1] = cpu_to_le16(RESET_MAC_REQ);
+	mgmt_frame->desc_word[4] = cpu_to_le16(RETRY_COUNT << 8);
+
+	skb_put(skb, FRAME_DESC_SZ);
+
+	return rsi_send_internal_mgmt_frame(common, skb);
+}
+
+/**
+ * rsi_set_channel() - This function programs the channel.
+ * @common: Pointer to the driver private structure.
+ * @channel: Channel value to be set.
+ *
+ * Return: 0 on success, corresponding error code on failure.
+ */
+int rsi_set_channel(struct rsi_common *common, u16 channel)
+{
+	struct sk_buff *skb = NULL;
+	struct rsi_mac_frame *mgmt_frame;
+
+	rsi_dbg(MGMT_TX_ZONE,
+		"%s: Sending scan req frame\n", __func__);
+
+	skb = dev_alloc_skb(FRAME_DESC_SZ);
+	if (!skb) {
+		rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n",
+			__func__);
+		return -ENOMEM;
+	}
+
+	memset(skb->data, 0, FRAME_DESC_SZ);
+	mgmt_frame = (struct rsi_mac_frame *)skb->data;
+
+	if (common->band == IEEE80211_BAND_5GHZ) {
+		if ((channel >= 36) && (channel <= 64))
+			channel = ((channel - 32) / 4);
+		else if ((channel > 64) && (channel <= 140))
+			channel = ((channel - 102) / 4) + 8;
+		else if (channel >= 149)
+			channel = ((channel - 151) / 4) + 18;
+		else
+			return -EINVAL;
+	} else {
+		if (channel > 14) {
+			rsi_dbg(ERR_ZONE, "%s: Invalid chno %d, band = %d\n",
+				__func__, channel, common->band);
+			return -EINVAL;
+		}
+	}
+
+	mgmt_frame->desc_word[0] = cpu_to_le16(RSI_WIFI_MGMT_Q << 12);
+	mgmt_frame->desc_word[1] = cpu_to_le16(SCAN_REQUEST);
+	mgmt_frame->desc_word[4] = cpu_to_le16(channel);
+
+	mgmt_frame->desc_word[7] = cpu_to_le16(PUT_BBP_RESET |
+					       BBP_REG_WRITE |
+					       (RSI_RF_TYPE << 4));
+
+	mgmt_frame->desc_word[5] = cpu_to_le16(0x01);
+
+	if (common->channel_width == BW_40MHZ)
+		mgmt_frame->desc_word[5] |= cpu_to_le16(0x1 << 8);
+
+	common->channel = channel;
+
+	skb_put(skb, FRAME_DESC_SZ);
+
+	return rsi_send_internal_mgmt_frame(common, skb);
+}
+
+/**
+ * rsi_compare() - This function is used to compare two integers
+ * @a: pointer to the first integer
+ * @b: pointer to the second integer
+ *
+ * Return: 0 if both are equal, -1 if the first is smaller, else 1
+ */
+static int rsi_compare(const void *a, const void *b)
+{
+	u16 _a = *(const u16 *)(a);
+	u16 _b = *(const u16 *)(b);
+
+	if (_a > _b)
+		return -1;
+
+	if (_a < _b)
+		return 1;
+
+	return 0;
+}
+
+/**
+ * rsi_map_rates() - This function is used to map selected rates to hw rates.
+ * @rate: The standard rate to be mapped.
+ * @offset: Offset that will be returned.
+ *
+ * Return: 0 if it is a mcs rate, else 1
+ */
+static bool rsi_map_rates(u16 rate, int *offset)
+{
+	int kk;
+	for (kk = 0; kk < ARRAY_SIZE(rsi_mcsrates); kk++) {
+		if (rate == mcs[kk]) {
+			*offset = kk;
+			return false;
+		}
+	}
+
+	for (kk = 0; kk < ARRAY_SIZE(rsi_rates); kk++) {
+		if (rate == rsi_rates[kk].bitrate / 5) {
+			*offset = kk;
+			break;
+		}
+	}
+	return true;
+}
+
+/**
+ * rsi_send_auto_rate_request() - This function is to set rates for connection
+ *				  and send autorate request to firmware.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: 0 on success, corresponding error code on failure.
+ */
+static int rsi_send_auto_rate_request(struct rsi_common *common)
+{
+	struct sk_buff *skb;
+	struct rsi_auto_rate *auto_rate;
+	int ii = 0, jj = 0, kk = 0;
+	struct ieee80211_hw *hw = common->priv->hw;
+	u8 band = hw->conf.chandef.chan->band;
+	u8 num_supported_rates = 0;
+	u8 rate_offset = 0;
+	u32 rate_bitmap = common->bitrate_mask[band];
+
+	u16 *selected_rates, min_rate;
+
+	skb = dev_alloc_skb(sizeof(struct rsi_auto_rate));
+	if (!skb) {
+		rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n",
+			__func__);
+		return -ENOMEM;
+	}
+
+	selected_rates = kmalloc(2 * RSI_TBL_SZ, GFP_KERNEL);
+	if (!selected_rates) {
+		rsi_dbg(ERR_ZONE, "%s: Failed in allocation of mem\n",
+			__func__);
+		return -ENOMEM;
+	}
+
+	memset(skb->data, 0, sizeof(struct rsi_auto_rate));
+	memset(selected_rates, 0, 2 * RSI_TBL_SZ);
+
+	auto_rate = (struct rsi_auto_rate *)skb->data;
+
+	auto_rate->aarf_rssi = cpu_to_le16(((u16)3 << 6) | (u16)(18 & 0x3f));
+	auto_rate->collision_tolerance = cpu_to_le16(3);
+	auto_rate->failure_limit = cpu_to_le16(3);
+	auto_rate->initial_boundary = cpu_to_le16(3);
+	auto_rate->max_threshold_limt = cpu_to_le16(27);
+
+	auto_rate->desc_word[1] = cpu_to_le16(AUTO_RATE_IND);
+
+	if (common->channel_width == BW_40MHZ)
+		auto_rate->desc_word[7] |= cpu_to_le16(1);
+
+	if (band == IEEE80211_BAND_2GHZ)
+		min_rate = STD_RATE_01;
+	else
+		min_rate = STD_RATE_06;
+
+	for (ii = 0, jj = 0; ii < ARRAY_SIZE(rsi_rates); ii++) {
+		if (rate_bitmap & BIT(ii)) {
+			selected_rates[jj++] = (rsi_rates[ii].bitrate / 5);
+			rate_offset++;
+		}
+	}
+	num_supported_rates = jj;
+
+	if (common->vif_info[0].is_ht) {
+		for (ii = 0; ii < ARRAY_SIZE(mcs); ii++)
+			selected_rates[jj++] = mcs[ii];
+		num_supported_rates += ARRAY_SIZE(mcs);
+		rate_offset += ARRAY_SIZE(mcs);
+	}
+
+	if (rate_offset < (RSI_TBL_SZ / 2) - 1) {
+		for (ii = jj; ii < (RSI_TBL_SZ / 2); ii++) {
+			selected_rates[jj++] = min_rate;
+			rate_offset++;
+		}
+	}
+
+	sort(selected_rates, jj, sizeof(u16), &rsi_compare, NULL);
+
+	/* mapping the rates to RSI rates */
+	for (ii = 0; ii < jj; ii++) {
+		if (rsi_map_rates(selected_rates[ii], &kk)) {
+			auto_rate->supported_rates[ii] =
+				cpu_to_le16(rsi_rates[kk].hw_value);
+		} else {
+			auto_rate->supported_rates[ii] =
+				cpu_to_le16(rsi_mcsrates[kk]);
+		}
+	}
+
+	/* loading HT rates in the bottom half of the auto rate table */
+	if (common->vif_info[0].is_ht) {
+		if (common->vif_info[0].sgi)
+			auto_rate->supported_rates[rate_offset++] =
+				cpu_to_le16(RSI_RATE_MCS7_SG);
+
+		for (ii = rate_offset, kk = ARRAY_SIZE(rsi_mcsrates) - 1;
+		     ii < rate_offset + 2 * ARRAY_SIZE(rsi_mcsrates); ii++) {
+			if (common->vif_info[0].sgi)
+				auto_rate->supported_rates[ii++] =
+					cpu_to_le16(rsi_mcsrates[kk] | BIT(9));
+			auto_rate->supported_rates[ii] =
+				cpu_to_le16(rsi_mcsrates[kk--]);
+		}
+
+		for (; ii < RSI_TBL_SZ; ii++) {
+			auto_rate->supported_rates[ii] =
+				cpu_to_le16(rsi_mcsrates[0]);
+		}
+	}
+
+	auto_rate->num_supported_rates = cpu_to_le16(num_supported_rates * 2);
+	auto_rate->moderate_rate_inx = cpu_to_le16(num_supported_rates / 2);
+	auto_rate->desc_word[7] |= cpu_to_le16(0 << 8);
+	num_supported_rates *= 2;
+
+	auto_rate->desc_word[0] = cpu_to_le16((sizeof(*auto_rate) -
+					       FRAME_DESC_SZ) |
+					       (RSI_WIFI_MGMT_Q << 12));
+
+	skb_put(skb,
+		sizeof(struct rsi_auto_rate));
+	kfree(selected_rates);
+
+	return rsi_send_internal_mgmt_frame(common, skb);
+}
+
+/**
+ * rsi_inform_bss_status() - This function informs about bss status with the
+ *			     help of sta notify params by sending an internal
+ *			     management frame to firmware.
+ * @common: Pointer to the driver private structure.
+ * @status: Bss status type.
+ * @bssid: Bssid.
+ * @qos_enable: Qos is enabled.
+ * @aid: Aid (unique for all STAs).
+ *
+ * Return: None.
+ */
+void rsi_inform_bss_status(struct rsi_common *common,
+			   u8 status,
+			   const unsigned char *bssid,
+			   u8 qos_enable,
+			   u16 aid)
+{
+	if (status) {
+		rsi_hal_send_sta_notify_frame(common,
+					      NL80211_IFTYPE_STATION,
+					      STA_CONNECTED,
+					      bssid,
+					      qos_enable,
+					      aid);
+		if (common->min_rate == 0xffff)
+			rsi_send_auto_rate_request(common);
+	} else {
+		rsi_hal_send_sta_notify_frame(common,
+					      NL80211_IFTYPE_STATION,
+					      STA_DISCONNECTED,
+					      bssid,
+					      qos_enable,
+					      aid);
+	}
+}
+
+/**
+ * rsi_eeprom_read() - This function sends a frame to read the mac address
+ *		       from the eeprom.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+static int rsi_eeprom_read(struct rsi_common *common)
+{
+	struct rsi_mac_frame *mgmt_frame;
+	struct sk_buff *skb;
+
+	rsi_dbg(MGMT_TX_ZONE, "%s: Sending EEPROM read req frame\n", __func__);
+
+	skb = dev_alloc_skb(FRAME_DESC_SZ);
+	if (!skb) {
+		rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n",
+			__func__);
+		return -ENOMEM;
+	}
+
+	memset(skb->data, 0, FRAME_DESC_SZ);
+	mgmt_frame = (struct rsi_mac_frame *)skb->data;
+
+	/* FrameType */
+	mgmt_frame->desc_word[1] = cpu_to_le16(EEPROM_READ_TYPE);
+	mgmt_frame->desc_word[0] = cpu_to_le16(RSI_WIFI_MGMT_Q << 12);
+	/* Number of bytes to read */
+	mgmt_frame->desc_word[3] = cpu_to_le16(ETH_ALEN +
+					       WLAN_MAC_MAGIC_WORD_LEN +
+					       WLAN_HOST_MODE_LEN +
+					       WLAN_FW_VERSION_LEN);
+	/* Address to read */
+	mgmt_frame->desc_word[4] = cpu_to_le16(WLAN_MAC_EEPROM_ADDR);
+
+	skb_put(skb, FRAME_DESC_SZ);
+
+	return rsi_send_internal_mgmt_frame(common, skb);
+}
+
+/**
+ * rsi_handle_ta_confirm_type() - This function handles the confirm frames.
+ * @common: Pointer to the driver private structure.
+ * @msg: Pointer to received packet.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+static int rsi_handle_ta_confirm_type(struct rsi_common *common,
+				      u8 *msg)
+{
+	u8 sub_type = (msg[15] & 0xff);
+
+	switch (sub_type) {
+	case BOOTUP_PARAMS_REQUEST:
+		rsi_dbg(FSM_ZONE, "%s: Boot up params confirm received\n",
+			__func__);
+		if (common->fsm_state == FSM_BOOT_PARAMS_SENT) {
+			if (rsi_eeprom_read(common)) {
+				common->fsm_state = FSM_CARD_NOT_READY;
+				goto out;
+			} else {
+				common->fsm_state = FSM_EEPROM_READ_MAC_ADDR;
+			}
+		} else {
+			rsi_dbg(ERR_ZONE,
+				"%s: Received bootup params cfm in %d state\n",
+				 __func__, common->fsm_state);
+			return 0;
+		}
+		break;
+
+	case EEPROM_READ_TYPE:
+		if (common->fsm_state == FSM_EEPROM_READ_MAC_ADDR) {
+			if (msg[16] == MAGIC_WORD) {
+				u8 offset = (FRAME_DESC_SZ + WLAN_HOST_MODE_LEN
+					     + WLAN_MAC_MAGIC_WORD_LEN);
+				memcpy(common->mac_addr,
+				       &msg[offset],
+				       ETH_ALEN);
+				memcpy(&common->fw_ver,
+				       &msg[offset + ETH_ALEN],
+				       sizeof(struct version_info));
+
+			} else {
+				common->fsm_state = FSM_CARD_NOT_READY;
+				break;
+			}
+			if (rsi_send_reset_mac(common))
+				goto out;
+			else
+				common->fsm_state = FSM_RESET_MAC_SENT;
+		} else {
+			rsi_dbg(ERR_ZONE,
+				"%s: Received eeprom mac addr in %d state\n",
+				__func__, common->fsm_state);
+			return 0;
+		}
+		break;
+
+	case RESET_MAC_REQ:
+		if (common->fsm_state == FSM_RESET_MAC_SENT) {
+			rsi_dbg(FSM_ZONE, "%s: Reset MAC cfm received\n",
+				__func__);
+
+			if (rsi_load_radio_caps(common))
+				goto out;
+			else
+				common->fsm_state = FSM_RADIO_CAPS_SENT;
+		} else {
+			rsi_dbg(ERR_ZONE,
+				"%s: Received reset mac cfm in %d state\n",
+				 __func__, common->fsm_state);
+			return 0;
+		}
+		break;
+
+	case RADIO_CAPABILITIES:
+		if (common->fsm_state == FSM_RADIO_CAPS_SENT) {
+			common->rf_reset = 1;
+			if (rsi_program_bb_rf(common)) {
+				goto out;
+			} else {
+				common->fsm_state = FSM_BB_RF_PROG_SENT;
+				rsi_dbg(FSM_ZONE, "%s: Radio cap cfm received\n",
+					__func__);
+			}
+		} else {
+			rsi_dbg(ERR_ZONE,
+				"%s: Received radio caps cfm in %d state\n",
+				 __func__, common->fsm_state);
+			return 0;
+		}
+		break;
+
+	case BB_PROG_VALUES_REQUEST:
+	case RF_PROG_VALUES_REQUEST:
+	case BBP_PROG_IN_TA:
+		rsi_dbg(FSM_ZONE, "%s: BB/RF cfm received\n", __func__);
+		if (common->fsm_state == FSM_BB_RF_PROG_SENT) {
+			common->bb_rf_prog_count--;
+			if (!common->bb_rf_prog_count) {
+				common->fsm_state = FSM_MAC_INIT_DONE;
+				return rsi_mac80211_attach(common);
+			}
+		} else {
+			goto out;
+		}
+		break;
+
+	default:
+		rsi_dbg(INFO_ZONE, "%s: Invalid TA confirm pkt received\n",
+			__func__);
+		break;
+	}
+	return 0;
+out:
+	rsi_dbg(ERR_ZONE, "%s: Unable to send pkt/Invalid frame received\n",
+		__func__);
+	return -EINVAL;
+}
+
+/**
+ * rsi_mgmt_pkt_recv() - This function processes the management packets
+ *			 recieved from the hardware.
+ * @common: Pointer to the driver private structure.
+ * @msg: Pointer to the received packet.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+int rsi_mgmt_pkt_recv(struct rsi_common *common, u8 *msg)
+{
+	s32 msg_len = (le16_to_cpu(*(__le16 *)&msg[0]) & 0x0fff);
+	u16 msg_type = (msg[2]);
+
+	rsi_dbg(FSM_ZONE, "%s: Msg Len: %d, Msg Type: %4x\n",
+		__func__, msg_len, msg_type);
+
+	if (msg_type == TA_CONFIRM_TYPE) {
+		return rsi_handle_ta_confirm_type(common, msg);
+	} else if (msg_type == CARD_READY_IND) {
+		rsi_dbg(FSM_ZONE, "%s: Card ready indication received\n",
+			__func__);
+		if (common->fsm_state == FSM_CARD_NOT_READY) {
+			rsi_set_default_parameters(common);
+
+			if (rsi_load_bootup_params(common))
+				return -ENOMEM;
+			else
+				common->fsm_state = FSM_BOOT_PARAMS_SENT;
+		} else {
+			return -EINVAL;
+		}
+	} else if (msg_type == TX_STATUS_IND) {
+		if (msg[15] == PROBEREQ_CONFIRM)
+			common->mgmt_q_block = false;
+			rsi_dbg(FSM_ZONE, "%s: Probe confirm received\n",
+				__func__);
+	} else {
+		return rsi_mgmt_pkt_to_core(common, msg, msg_len, msg_type);
+	}
+	return 0;
+}
diff --git a/drivers/net/wireless/rsi/rsi_91x_pkt.c b/drivers/net/wireless/rsi/rsi_91x_pkt.c
new file mode 100644
index 000000000000..8e48e72bae20
--- /dev/null
+++ b/drivers/net/wireless/rsi/rsi_91x_pkt.c
@@ -0,0 +1,196 @@
+/**
+ * Copyright (c) 2014 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "rsi_mgmt.h"
+
+/**
+ * rsi_send_data_pkt() - This function sends the recieved data packet from
+ *			 driver to device.
+ * @common: Pointer to the driver private structure.
+ * @skb: Pointer to the socket buffer structure.
+ *
+ * Return: status: 0 on success, -1 on failure.
+ */
+int rsi_send_data_pkt(struct rsi_common *common, struct sk_buff *skb)
+{
+	struct rsi_hw *adapter = common->priv;
+	struct ieee80211_hdr *tmp_hdr = NULL;
+	struct ieee80211_tx_info *info;
+	struct skb_info *tx_params;
+	struct ieee80211_bss_conf *bss = NULL;
+	int status = -EINVAL;
+	u8 ieee80211_size = MIN_802_11_HDR_LEN;
+	u8 extnd_size = 0;
+	__le16 *frame_desc;
+	u16 seq_num = 0;
+
+	info = IEEE80211_SKB_CB(skb);
+	bss = &info->control.vif->bss_conf;
+	tx_params = (struct skb_info *)info->driver_data;
+
+	if (!bss->assoc)
+		goto err;
+
+	tmp_hdr = (struct ieee80211_hdr *)&skb->data[0];
+	seq_num = (le16_to_cpu(tmp_hdr->seq_ctrl) >> 4);
+
+	extnd_size = ((uintptr_t)skb->data & 0x3);
+
+	if ((FRAME_DESC_SZ + extnd_size) > skb_headroom(skb)) {
+		rsi_dbg(ERR_ZONE, "%s: Unable to send pkt\n", __func__);
+		status = -ENOSPC;
+		goto err;
+	}
+
+	skb_push(skb, (FRAME_DESC_SZ + extnd_size));
+	frame_desc = (__le16 *)&skb->data[0];
+	memset((u8 *)frame_desc, 0, FRAME_DESC_SZ);
+
+	if (ieee80211_is_data_qos(tmp_hdr->frame_control)) {
+		ieee80211_size += 2;
+		frame_desc[6] |= cpu_to_le16(BIT(12));
+	}
+
+	if ((!(info->flags & IEEE80211_TX_INTFL_DONT_ENCRYPT)) &&
+	    (common->secinfo.security_enable)) {
+		if (rsi_is_cipher_wep(common))
+			ieee80211_size += 4;
+		else
+			ieee80211_size += 8;
+		frame_desc[6] |= cpu_to_le16(BIT(15));
+	}
+
+	frame_desc[0] = cpu_to_le16((skb->len - FRAME_DESC_SZ) |
+				    (RSI_WIFI_DATA_Q << 12));
+	frame_desc[2] = cpu_to_le16((extnd_size) | (ieee80211_size) << 8);
+
+	if (common->min_rate != 0xffff) {
+		/* Send fixed rate */
+		frame_desc[3] = cpu_to_le16(RATE_INFO_ENABLE);
+		frame_desc[4] = cpu_to_le16(common->min_rate);
+	}
+
+	frame_desc[6] |= cpu_to_le16(seq_num & 0xfff);
+	frame_desc[7] = cpu_to_le16(((tx_params->tid & 0xf) << 4) |
+				    (skb->priority & 0xf) |
+				    (tx_params->sta_id << 8));
+
+	status = adapter->host_intf_write_pkt(common->priv,
+					      skb->data,
+					      skb->len);
+	if (status)
+		rsi_dbg(ERR_ZONE, "%s: Failed to write pkt\n",
+			__func__);
+
+err:
+	++common->tx_stats.total_tx_pkt_freed[skb->priority];
+	rsi_indicate_tx_status(common->priv, skb, status);
+	return status;
+}
+
+/**
+ * rsi_send_mgmt_pkt() - This functions sends the received management packet
+ *			 from driver to device.
+ * @common: Pointer to the driver private structure.
+ * @skb: Pointer to the socket buffer structure.
+ *
+ * Return: status: 0 on success, -1 on failure.
+ */
+int rsi_send_mgmt_pkt(struct rsi_common *common,
+		      struct sk_buff *skb)
+{
+	struct rsi_hw *adapter = common->priv;
+	struct ieee80211_hdr *wh = NULL;
+	struct ieee80211_tx_info *info;
+	struct ieee80211_bss_conf *bss = NULL;
+	struct skb_info *tx_params;
+	int status = -E2BIG;
+	__le16 *msg = NULL;
+	u8 extnd_size = 0;
+	u8 vap_id = 0;
+
+	info = IEEE80211_SKB_CB(skb);
+	tx_params = (struct skb_info *)info->driver_data;
+	extnd_size = ((uintptr_t)skb->data & 0x3);
+
+	if (tx_params->flags & INTERNAL_MGMT_PKT) {
+		if ((extnd_size) > skb_headroom(skb)) {
+			rsi_dbg(ERR_ZONE, "%s: Unable to send pkt\n", __func__);
+			dev_kfree_skb(skb);
+			return -ENOSPC;
+		}
+		skb_push(skb, extnd_size);
+		skb->data[extnd_size + 4] = extnd_size;
+		status = adapter->host_intf_write_pkt(common->priv,
+						      (u8 *)skb->data,
+						      skb->len);
+		if (status) {
+			rsi_dbg(ERR_ZONE,
+				"%s: Failed to write the packet\n", __func__);
+		}
+		dev_kfree_skb(skb);
+		return status;
+	}
+
+	bss = &info->control.vif->bss_conf;
+	wh = (struct ieee80211_hdr *)&skb->data[0];
+
+	if (FRAME_DESC_SZ > skb_headroom(skb))
+		goto err;
+
+	skb_push(skb, FRAME_DESC_SZ);
+	memset(skb->data, 0, FRAME_DESC_SZ);
+	msg = (__le16 *)skb->data;
+
+	if (skb->len > MAX_MGMT_PKT_SIZE) {
+		rsi_dbg(INFO_ZONE, "%s: Dropping mgmt pkt > 512\n", __func__);
+		goto err;
+	}
+
+	msg[0] = cpu_to_le16((skb->len - FRAME_DESC_SZ) |
+			    (RSI_WIFI_MGMT_Q << 12));
+	msg[1] = cpu_to_le16(TX_DOT11_MGMT);
+	msg[2] = cpu_to_le16(MIN_802_11_HDR_LEN << 8);
+	msg[3] = cpu_to_le16(RATE_INFO_ENABLE);
+	msg[6] = cpu_to_le16(le16_to_cpu(wh->seq_ctrl) >> 4);
+
+	if (wh->addr1[0] & BIT(0))
+		msg[3] |= cpu_to_le16(RSI_BROADCAST_PKT);
+
+	if (common->band == IEEE80211_BAND_2GHZ)
+		msg[4] = cpu_to_le16(RSI_11B_MODE);
+	else
+		msg[4] = cpu_to_le16((RSI_RATE_6 & 0x0f) | RSI_11G_MODE);
+
+	/* Indicate to firmware to give cfm */
+	if ((skb->data[16] == IEEE80211_STYPE_PROBE_REQ) && (!bss->assoc)) {
+		msg[1] |= cpu_to_le16(BIT(10));
+		msg[7] = cpu_to_le16(PROBEREQ_CONFIRM);
+		common->mgmt_q_block = true;
+	}
+
+	msg[7] |= cpu_to_le16(vap_id << 8);
+
+	status = adapter->host_intf_write_pkt(common->priv,
+					      (u8 *)msg,
+					      skb->len);
+	if (status)
+		rsi_dbg(ERR_ZONE, "%s: Failed to write the packet\n", __func__);
+
+err:
+	rsi_indicate_tx_status(common->priv, skb, status);
+	return status;
+}
diff --git a/drivers/net/wireless/rsi/rsi_91x_sdio.c b/drivers/net/wireless/rsi/rsi_91x_sdio.c
new file mode 100644
index 000000000000..852453f386e2
--- /dev/null
+++ b/drivers/net/wireless/rsi/rsi_91x_sdio.c
@@ -0,0 +1,850 @@
+/**
+ * Copyright (c) 2014 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/module.h>
+#include "rsi_sdio.h"
+#include "rsi_common.h"
+
+/**
+ * rsi_sdio_set_cmd52_arg() - This function prepares cmd 52 read/write arg.
+ * @rw: Read/write
+ * @func: function number
+ * @raw: indicates whether to perform read after write
+ * @address: address to which to read/write
+ * @writedata: data to write
+ *
+ * Return: argument
+ */
+static u32 rsi_sdio_set_cmd52_arg(bool rw,
+				  u8 func,
+				  u8 raw,
+				  u32 address,
+				  u8 writedata)
+{
+	return ((rw & 1) << 31) | ((func & 0x7) << 28) |
+		((raw & 1) << 27) | (1 << 26) |
+		((address & 0x1FFFF) << 9) | (1 << 8) |
+		(writedata & 0xFF);
+}
+
+/**
+ * rsi_cmd52writebyte() - This function issues cmd52 byte write onto the card.
+ * @card: Pointer to the mmc_card.
+ * @address: Address to write.
+ * @byte: Data to write.
+ *
+ * Return: Write status.
+ */
+static int rsi_cmd52writebyte(struct mmc_card *card,
+			      u32 address,
+			      u8 byte)
+{
+	struct mmc_command io_cmd;
+	u32 arg;
+
+	memset(&io_cmd, 0, sizeof(io_cmd));
+	arg = rsi_sdio_set_cmd52_arg(1, 0, 0, address, byte);
+	io_cmd.opcode = SD_IO_RW_DIRECT;
+	io_cmd.arg = arg;
+	io_cmd.flags = MMC_RSP_R5 | MMC_CMD_AC;
+
+	return mmc_wait_for_cmd(card->host, &io_cmd, 0);
+}
+
+/**
+ * rsi_cmd52readbyte() - This function issues cmd52 byte read onto the card.
+ * @card: Pointer to the mmc_card.
+ * @address: Address to read from.
+ * @byte: Variable to store read value.
+ *
+ * Return: Read status.
+ */
+static int rsi_cmd52readbyte(struct mmc_card *card,
+			     u32 address,
+			     u8 *byte)
+{
+	struct mmc_command io_cmd;
+	u32 arg;
+	int err;
+
+	memset(&io_cmd, 0, sizeof(io_cmd));
+	arg = rsi_sdio_set_cmd52_arg(0, 0, 0, address, 0);
+	io_cmd.opcode = SD_IO_RW_DIRECT;
+	io_cmd.arg = arg;
+	io_cmd.flags = MMC_RSP_R5 | MMC_CMD_AC;
+
+	err = mmc_wait_for_cmd(card->host, &io_cmd, 0);
+	if ((!err) && (byte))
+		*byte =  io_cmd.resp[0] & 0xFF;
+	return err;
+}
+
+/**
+ * rsi_issue_sdiocommand() - This function issues sdio commands.
+ * @func: Pointer to the sdio_func structure.
+ * @opcode: Opcode value.
+ * @arg: Arguments to pass.
+ * @flags: Flags which are set.
+ * @resp: Pointer to store response.
+ *
+ * Return: err: command status as 0 or -1.
+ */
+static int rsi_issue_sdiocommand(struct sdio_func *func,
+				 u32 opcode,
+				 u32 arg,
+				 u32 flags,
+				 u32 *resp)
+{
+	struct mmc_command cmd;
+	struct mmc_host *host;
+	int err;
+
+	host = func->card->host;
+
+	memset(&cmd, 0, sizeof(struct mmc_command));
+	cmd.opcode = opcode;
+	cmd.arg = arg;
+	cmd.flags = flags;
+	err = mmc_wait_for_cmd(host, &cmd, 3);
+
+	if ((!err) && (resp))
+		*resp = cmd.resp[0];
+
+	return err;
+}
+
+/**
+ * rsi_handle_interrupt() - This function is called upon the occurence
+ *			    of an interrupt.
+ * @function: Pointer to the sdio_func structure.
+ *
+ * Return: None.
+ */
+static void rsi_handle_interrupt(struct sdio_func *function)
+{
+	struct rsi_hw *adapter = sdio_get_drvdata(function);
+
+	sdio_release_host(function);
+	rsi_interrupt_handler(adapter);
+	sdio_claim_host(function);
+}
+
+/**
+ * rsi_reset_card() - This function resets and re-initializes the card.
+ * @pfunction: Pointer to the sdio_func structure.
+ *
+ * Return: None.
+ */
+static void rsi_reset_card(struct sdio_func *pfunction)
+{
+	int ret = 0;
+	int err;
+	struct mmc_card *card = pfunction->card;
+	struct mmc_host *host = card->host;
+	s32 bit = (fls(host->ocr_avail) - 1);
+	u8 cmd52_resp;
+	u32 clock, resp, i;
+	u16 rca;
+
+	/* Reset 9110 chip */
+	ret = rsi_cmd52writebyte(pfunction->card,
+				 SDIO_CCCR_ABORT,
+				 (1 << 3));
+
+	/* Card will not send any response as it is getting reset immediately
+	 * Hence expect a timeout status from host controller
+	 */
+	if (ret != -ETIMEDOUT)
+		rsi_dbg(ERR_ZONE, "%s: Reset failed : %d\n", __func__, ret);
+
+	/* Wait for few milli seconds to get rid of residue charges if any */
+	msleep(20);
+
+	/* Initialize the SDIO card */
+	host->ios.vdd = bit;
+	host->ios.chip_select = MMC_CS_DONTCARE;
+	host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN;
+	host->ios.power_mode = MMC_POWER_UP;
+	host->ios.bus_width = MMC_BUS_WIDTH_1;
+	host->ios.timing = MMC_TIMING_LEGACY;
+	host->ops->set_ios(host, &host->ios);
+
+	/*
+	 * This delay should be sufficient to allow the power supply
+	 * to reach the minimum voltage.
+	 */
+	msleep(20);
+
+	host->ios.clock = host->f_min;
+	host->ios.power_mode = MMC_POWER_ON;
+	host->ops->set_ios(host, &host->ios);
+
+	/*
+	 * This delay must be at least 74 clock sizes, or 1 ms, or the
+	 * time required to reach a stable voltage.
+	 */
+	msleep(20);
+
+	/* Issue CMD0. Goto idle state */
+	host->ios.chip_select = MMC_CS_HIGH;
+	host->ops->set_ios(host, &host->ios);
+	msleep(20);
+	err = rsi_issue_sdiocommand(pfunction,
+				    MMC_GO_IDLE_STATE,
+				    0,
+				    (MMC_RSP_NONE | MMC_CMD_BC),
+				    NULL);
+	host->ios.chip_select = MMC_CS_DONTCARE;
+	host->ops->set_ios(host, &host->ios);
+	msleep(20);
+	host->use_spi_crc = 0;
+
+	if (err)
+		rsi_dbg(ERR_ZONE, "%s: CMD0 failed : %d\n", __func__, err);
+
+	if (!host->ocr_avail) {
+		/* Issue CMD5, arg = 0 */
+		err = rsi_issue_sdiocommand(pfunction,
+					    SD_IO_SEND_OP_COND,
+					    0,
+					    (MMC_RSP_R4 | MMC_CMD_BCR),
+					    &resp);
+		if (err)
+			rsi_dbg(ERR_ZONE, "%s: CMD5 failed : %d\n",
+				__func__, err);
+		host->ocr_avail = resp;
+	}
+
+	/* Issue CMD5, arg = ocr. Wait till card is ready  */
+	for (i = 0; i < 100; i++) {
+		err = rsi_issue_sdiocommand(pfunction,
+					    SD_IO_SEND_OP_COND,
+					    host->ocr_avail,
+					    (MMC_RSP_R4 | MMC_CMD_BCR),
+					    &resp);
+		if (err) {
+			rsi_dbg(ERR_ZONE, "%s: CMD5 failed : %d\n",
+				__func__, err);
+			break;
+		}
+
+		if (resp & MMC_CARD_BUSY)
+			break;
+		msleep(20);
+	}
+
+	if ((i == 100) || (err)) {
+		rsi_dbg(ERR_ZONE, "%s: card in not ready : %d %d\n",
+			__func__, i, err);
+		return;
+	}
+
+	/* Issue CMD3, get RCA */
+	err = rsi_issue_sdiocommand(pfunction,
+				    SD_SEND_RELATIVE_ADDR,
+				    0,
+				    (MMC_RSP_R6 | MMC_CMD_BCR),
+				    &resp);
+	if (err) {
+		rsi_dbg(ERR_ZONE, "%s: CMD3 failed : %d\n", __func__, err);
+		return;
+	}
+	rca = resp >> 16;
+	host->ios.bus_mode = MMC_BUSMODE_PUSHPULL;
+	host->ops->set_ios(host, &host->ios);
+
+	/* Issue CMD7, select card  */
+	err = rsi_issue_sdiocommand(pfunction,
+				    MMC_SELECT_CARD,
+				    (rca << 16),
+				    (MMC_RSP_R1 | MMC_CMD_AC),
+				    NULL);
+	if (err) {
+		rsi_dbg(ERR_ZONE, "%s: CMD7 failed : %d\n", __func__, err);
+		return;
+	}
+
+	/* Enable high speed */
+	if (card->host->caps & MMC_CAP_SD_HIGHSPEED) {
+		rsi_dbg(ERR_ZONE, "%s: Set high speed mode\n", __func__);
+		err = rsi_cmd52readbyte(card, SDIO_CCCR_SPEED, &cmd52_resp);
+		if (err) {
+			rsi_dbg(ERR_ZONE, "%s: CCCR speed reg read failed: %d\n",
+				__func__, err);
+			card->state &= ~MMC_STATE_HIGHSPEED;
+		} else {
+			err = rsi_cmd52writebyte(card,
+						 SDIO_CCCR_SPEED,
+						 (cmd52_resp | SDIO_SPEED_EHS));
+			if (err) {
+				rsi_dbg(ERR_ZONE,
+					"%s: CCR speed regwrite failed %d\n",
+					__func__, err);
+				return;
+			}
+			mmc_card_set_highspeed(card);
+			host->ios.timing = MMC_TIMING_SD_HS;
+			host->ops->set_ios(host, &host->ios);
+		}
+	}
+
+	/* Set clock */
+	if (mmc_card_highspeed(card))
+		clock = 50000000;
+	else
+		clock = card->cis.max_dtr;
+
+	if (clock > host->f_max)
+		clock = host->f_max;
+
+	host->ios.clock = clock;
+	host->ops->set_ios(host, &host->ios);
+
+	if (card->host->caps & MMC_CAP_4_BIT_DATA) {
+		/* CMD52: Set bus width & disable card detect resistor */
+		err = rsi_cmd52writebyte(card,
+					 SDIO_CCCR_IF,
+					 (SDIO_BUS_CD_DISABLE |
+					  SDIO_BUS_WIDTH_4BIT));
+		if (err) {
+			rsi_dbg(ERR_ZONE, "%s: Set bus mode failed : %d\n",
+				__func__, err);
+			return;
+		}
+		host->ios.bus_width = MMC_BUS_WIDTH_4;
+		host->ops->set_ios(host, &host->ios);
+	}
+}
+
+/**
+ * rsi_setclock() - This function sets the clock frequency.
+ * @adapter: Pointer to the adapter structure.
+ * @freq: Clock frequency.
+ *
+ * Return: None.
+ */
+static void rsi_setclock(struct rsi_hw *adapter, u32 freq)
+{
+	struct rsi_91x_sdiodev *dev =
+		(struct rsi_91x_sdiodev *)adapter->rsi_dev;
+	struct mmc_host *host = dev->pfunction->card->host;
+	u32 clock;
+
+	clock = freq * 1000;
+	if (clock > host->f_max)
+		clock = host->f_max;
+	host->ios.clock = clock;
+	host->ops->set_ios(host, &host->ios);
+}
+
+/**
+ * rsi_setblocklength() - This function sets the host block length.
+ * @adapter: Pointer to the adapter structure.
+ * @length: Block length to be set.
+ *
+ * Return: status: 0 on success, -1 on failure.
+ */
+static int rsi_setblocklength(struct rsi_hw *adapter, u32 length)
+{
+	struct rsi_91x_sdiodev *dev =
+		(struct rsi_91x_sdiodev *)adapter->rsi_dev;
+	int status;
+	rsi_dbg(INIT_ZONE, "%s: Setting the block length\n", __func__);
+
+	status = sdio_set_block_size(dev->pfunction, length);
+	dev->pfunction->max_blksize = 256;
+
+	rsi_dbg(INFO_ZONE,
+		"%s: Operational blk length is %d\n", __func__, length);
+	return status;
+}
+
+/**
+ * rsi_setupcard() - This function queries and sets the card's features.
+ * @adapter: Pointer to the adapter structure.
+ *
+ * Return: status: 0 on success, -1 on failure.
+ */
+static int rsi_setupcard(struct rsi_hw *adapter)
+{
+	struct rsi_91x_sdiodev *dev =
+		(struct rsi_91x_sdiodev *)adapter->rsi_dev;
+	int status = 0;
+
+	rsi_setclock(adapter, 50000);
+
+	dev->tx_blk_size = 256;
+	status = rsi_setblocklength(adapter, dev->tx_blk_size);
+	if (status)
+		rsi_dbg(ERR_ZONE,
+			"%s: Unable to set block length\n", __func__);
+	return status;
+}
+
+/**
+ * rsi_sdio_read_register() - This function reads one byte of information
+ *			      from a register.
+ * @adapter: Pointer to the adapter structure.
+ * @addr: Address of the register.
+ * @data: Pointer to the data that stores the data read.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+int rsi_sdio_read_register(struct rsi_hw *adapter,
+			   u32 addr,
+			   u8 *data)
+{
+	struct rsi_91x_sdiodev *dev =
+		(struct rsi_91x_sdiodev *)adapter->rsi_dev;
+	u8 fun_num = 0;
+	int status;
+
+	sdio_claim_host(dev->pfunction);
+
+	if (fun_num == 0)
+		*data = sdio_f0_readb(dev->pfunction, addr, &status);
+	else
+		*data = sdio_readb(dev->pfunction, addr, &status);
+
+	sdio_release_host(dev->pfunction);
+
+	return status;
+}
+
+/**
+ * rsi_sdio_write_register() - This function writes one byte of information
+ *			       into a register.
+ * @adapter: Pointer to the adapter structure.
+ * @function: Function Number.
+ * @addr: Address of the register.
+ * @data: Pointer to the data tha has to be written.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+int rsi_sdio_write_register(struct rsi_hw *adapter,
+			    u8 function,
+			    u32 addr,
+			    u8 *data)
+{
+	struct rsi_91x_sdiodev *dev =
+		(struct rsi_91x_sdiodev *)adapter->rsi_dev;
+	int status = 0;
+
+	sdio_claim_host(dev->pfunction);
+
+	if (function == 0)
+		sdio_f0_writeb(dev->pfunction, *data, addr, &status);
+	else
+		sdio_writeb(dev->pfunction, *data, addr, &status);
+
+	sdio_release_host(dev->pfunction);
+
+	return status;
+}
+
+/**
+ * rsi_sdio_ack_intr() - This function acks the interrupt received.
+ * @adapter: Pointer to the adapter structure.
+ * @int_bit: Interrupt bit to write into register.
+ *
+ * Return: None.
+ */
+void rsi_sdio_ack_intr(struct rsi_hw *adapter, u8 int_bit)
+{
+	int status;
+	status = rsi_sdio_write_register(adapter,
+					 1,
+					 (SDIO_FUN1_INTR_CLR_REG |
+					  RSI_SD_REQUEST_MASTER),
+					 &int_bit);
+	if (status)
+		rsi_dbg(ERR_ZONE, "%s: unable to send ack\n", __func__);
+}
+
+
+
+/**
+ * rsi_sdio_read_register_multiple() - This function read multiple bytes of
+ *				       information from the SD card.
+ * @adapter: Pointer to the adapter structure.
+ * @addr: Address of the register.
+ * @count: Number of multiple bytes to be read.
+ * @data: Pointer to the read data.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+static int rsi_sdio_read_register_multiple(struct rsi_hw *adapter,
+					   u32 addr,
+					   u32 count,
+					   u8 *data)
+{
+	struct rsi_91x_sdiodev *dev =
+		(struct rsi_91x_sdiodev *)adapter->rsi_dev;
+	u32 status;
+
+	sdio_claim_host(dev->pfunction);
+
+	status =  sdio_readsb(dev->pfunction, data, addr, count);
+
+	sdio_release_host(dev->pfunction);
+
+	if (status != 0)
+		rsi_dbg(ERR_ZONE, "%s: Synch Cmd53 read failed\n", __func__);
+	return status;
+}
+
+/**
+ * rsi_sdio_write_register_multiple() - This function writes multiple bytes of
+ *					information to the SD card.
+ * @adapter: Pointer to the adapter structure.
+ * @addr: Address of the register.
+ * @data: Pointer to the data that has to be written.
+ * @count: Number of multiple bytes to be written.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+int rsi_sdio_write_register_multiple(struct rsi_hw *adapter,
+				     u32 addr,
+				     u8 *data,
+				     u32 count)
+{
+	struct rsi_91x_sdiodev *dev =
+		(struct rsi_91x_sdiodev *)adapter->rsi_dev;
+	int status;
+
+	if (dev->write_fail > 1) {
+		rsi_dbg(ERR_ZONE, "%s: Stopping card writes\n", __func__);
+		return 0;
+	} else if (dev->write_fail == 1) {
+		/**
+		 * Assuming it is a CRC failure, we want to allow another
+		 *  card write
+		 */
+		rsi_dbg(ERR_ZONE, "%s: Continue card writes\n", __func__);
+		dev->write_fail++;
+	}
+
+	sdio_claim_host(dev->pfunction);
+
+	status = sdio_writesb(dev->pfunction, addr, data, count);
+
+	sdio_release_host(dev->pfunction);
+
+	if (status) {
+		rsi_dbg(ERR_ZONE, "%s: Synch Cmd53 write failed %d\n",
+			__func__, status);
+		dev->write_fail = 2;
+	} else {
+		memcpy(dev->prev_desc, data, FRAME_DESC_SZ);
+	}
+	return status;
+}
+
+/**
+ * rsi_sdio_host_intf_write_pkt() - This function writes the packet to device.
+ * @adapter: Pointer to the adapter structure.
+ * @pkt: Pointer to the data to be written on to the device.
+ * @len: length of the data to be written on to the device.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+static int rsi_sdio_host_intf_write_pkt(struct rsi_hw *adapter,
+					u8 *pkt,
+					u32 len)
+{
+	struct rsi_91x_sdiodev *dev =
+		(struct rsi_91x_sdiodev *)adapter->rsi_dev;
+	u32 block_size = dev->tx_blk_size;
+	u32 num_blocks, address, length;
+	u32 queueno;
+	int status;
+
+	queueno = ((pkt[1] >> 4) & 0xf);
+
+	num_blocks = len / block_size;
+
+	if (len % block_size)
+		num_blocks++;
+
+	address = (num_blocks * block_size | (queueno << 12));
+	length  = num_blocks * block_size;
+
+	status = rsi_sdio_write_register_multiple(adapter,
+						  address,
+						  (u8 *)pkt,
+						  length);
+	if (status)
+		rsi_dbg(ERR_ZONE, "%s: Unable to write onto the card: %d\n",
+			__func__, status);
+	rsi_dbg(DATA_TX_ZONE, "%s: Successfully written onto card\n", __func__);
+	return status;
+}
+
+/**
+ * rsi_sdio_host_intf_read_pkt() - This function reads the packet
+				   from the device.
+ * @adapter: Pointer to the adapter data structure.
+ * @pkt: Pointer to the packet data to be read from the the device.
+ * @length: Length of the data to be read from the device.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+int rsi_sdio_host_intf_read_pkt(struct rsi_hw *adapter,
+				u8 *pkt,
+				u32 length)
+{
+	int status = -EINVAL;
+
+	if (!length) {
+		rsi_dbg(ERR_ZONE, "%s: Pkt size is zero\n", __func__);
+		return status;
+	}
+
+	status = rsi_sdio_read_register_multiple(adapter,
+						 length,
+						 length, /*num of bytes*/
+						 (u8 *)pkt);
+
+	if (status)
+		rsi_dbg(ERR_ZONE, "%s: Failed to read frame: %d\n", __func__,
+			status);
+	return status;
+}
+
+/**
+ * rsi_init_sdio_interface() - This function does init specific to SDIO.
+ *
+ * @adapter: Pointer to the adapter data structure.
+ * @pkt: Pointer to the packet data to be read from the the device.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+
+static int rsi_init_sdio_interface(struct rsi_hw *adapter,
+				   struct sdio_func *pfunction)
+{
+	struct rsi_91x_sdiodev *rsi_91x_dev;
+	int status = -ENOMEM;
+
+	rsi_91x_dev = kzalloc(sizeof(*rsi_91x_dev), GFP_KERNEL);
+	if (!rsi_91x_dev)
+		return status;
+
+	adapter->rsi_dev = rsi_91x_dev;
+
+	sdio_claim_host(pfunction);
+
+	pfunction->enable_timeout = 100;
+	status = sdio_enable_func(pfunction);
+	if (status) {
+		rsi_dbg(ERR_ZONE, "%s: Failed to enable interface\n", __func__);
+		sdio_release_host(pfunction);
+		return status;
+	}
+
+	rsi_dbg(INIT_ZONE, "%s: Enabled the interface\n", __func__);
+
+	rsi_91x_dev->pfunction = pfunction;
+	adapter->device = &pfunction->dev;
+
+	sdio_set_drvdata(pfunction, adapter);
+
+	status = rsi_setupcard(adapter);
+	if (status) {
+		rsi_dbg(ERR_ZONE, "%s: Failed to setup card\n", __func__);
+		goto fail;
+	}
+
+	rsi_dbg(INIT_ZONE, "%s: Setup card succesfully\n", __func__);
+
+	status = rsi_init_sdio_slave_regs(adapter);
+	if (status) {
+		rsi_dbg(ERR_ZONE, "%s: Failed to init slave regs\n", __func__);
+		goto fail;
+	}
+	sdio_release_host(pfunction);
+
+	adapter->host_intf_write_pkt = rsi_sdio_host_intf_write_pkt;
+	adapter->host_intf_read_pkt = rsi_sdio_host_intf_read_pkt;
+	adapter->determine_event_timeout = rsi_sdio_determine_event_timeout;
+	adapter->check_hw_queue_status = rsi_sdio_read_buffer_status_register;
+
+#ifdef CONFIG_RSI_DEBUGFS
+	adapter->num_debugfs_entries = MAX_DEBUGFS_ENTRIES;
+#endif
+	return status;
+fail:
+	sdio_disable_func(pfunction);
+	sdio_release_host(pfunction);
+	return status;
+}
+
+/**
+ * rsi_probe() - This function is called by kernel when the driver provided
+ *		 Vendor and device IDs are matched. All the initialization
+ *		 work is done here.
+ * @pfunction: Pointer to the sdio_func structure.
+ * @id: Pointer to sdio_device_id structure.
+ *
+ * Return: 0 on success, 1 on failure.
+ */
+static int rsi_probe(struct sdio_func *pfunction,
+		     const struct sdio_device_id *id)
+{
+	struct rsi_hw *adapter;
+
+	rsi_dbg(INIT_ZONE, "%s: Init function called\n", __func__);
+
+	adapter = rsi_91x_init();
+	if (!adapter) {
+		rsi_dbg(ERR_ZONE, "%s: Failed to init os intf ops\n",
+			__func__);
+		return 1;
+	}
+
+	if (rsi_init_sdio_interface(adapter, pfunction)) {
+		rsi_dbg(ERR_ZONE, "%s: Failed to init sdio interface\n",
+			__func__);
+		goto fail;
+	}
+
+	if (rsi_sdio_device_init(adapter->priv)) {
+		rsi_dbg(ERR_ZONE, "%s: Failed in device init\n", __func__);
+		sdio_claim_host(pfunction);
+		sdio_disable_func(pfunction);
+		sdio_release_host(pfunction);
+		goto fail;
+	}
+
+	sdio_claim_host(pfunction);
+	if (sdio_claim_irq(pfunction, rsi_handle_interrupt)) {
+		rsi_dbg(ERR_ZONE, "%s: Failed to request IRQ\n", __func__);
+		sdio_release_host(pfunction);
+		goto fail;
+	}
+
+	sdio_release_host(pfunction);
+	rsi_dbg(INIT_ZONE, "%s: Registered Interrupt handler\n", __func__);
+
+	return 0;
+fail:
+	rsi_91x_deinit(adapter);
+	rsi_dbg(ERR_ZONE, "%s: Failed in probe...Exiting\n", __func__);
+	return 1;
+}
+
+/**
+ * rsi_disconnect() - This function performs the reverse of the probe function.
+ * @pfunction: Pointer to the sdio_func structure.
+ *
+ * Return: void.
+ */
+static void rsi_disconnect(struct sdio_func *pfunction)
+{
+	struct rsi_hw *adapter = sdio_get_drvdata(pfunction);
+	struct rsi_91x_sdiodev *dev =
+		(struct rsi_91x_sdiodev *)adapter->rsi_dev;
+
+	if (!adapter)
+		return;
+
+	dev->write_fail = 2;
+	rsi_mac80211_detach(adapter);
+
+	sdio_claim_host(pfunction);
+	sdio_release_irq(pfunction);
+	sdio_disable_func(pfunction);
+	rsi_91x_deinit(adapter);
+	/* Resetting to take care of the case, where-in driver is re-loaded */
+	rsi_reset_card(pfunction);
+	sdio_release_host(pfunction);
+}
+
+#ifdef CONFIG_PM
+static int rsi_suspend(struct device *dev)
+{
+	/* Not yet implemented */
+	return -ENOSYS;
+}
+
+static int rsi_resume(struct device *dev)
+{
+	/* Not yet implemented */
+	return -ENOSYS;
+}
+
+static const struct dev_pm_ops rsi_pm_ops = {
+	.suspend = rsi_suspend,
+	.resume = rsi_resume,
+};
+#endif
+
+static const struct sdio_device_id rsi_dev_table[] =  {
+	{ SDIO_DEVICE(0x303, 0x100) },
+	{ SDIO_DEVICE(0x041B, 0x0301) },
+	{ SDIO_DEVICE(0x041B, 0x0201) },
+	{ SDIO_DEVICE(0x041B, 0x9330) },
+	{ /* Blank */},
+};
+
+static struct sdio_driver rsi_driver = {
+	.name       = "RSI-SDIO WLAN",
+	.probe      = rsi_probe,
+	.remove     = rsi_disconnect,
+	.id_table   = rsi_dev_table,
+#ifdef CONFIG_PM
+	.drv = {
+		.pm = &rsi_pm_ops,
+	}
+#endif
+};
+
+/**
+ * rsi_module_init() - This function registers the sdio module.
+ * @void: Void.
+ *
+ * Return: 0 on success.
+ */
+static int rsi_module_init(void)
+{
+	sdio_register_driver(&rsi_driver);
+	rsi_dbg(INIT_ZONE, "%s: Registering driver\n", __func__);
+	return 0;
+}
+
+/**
+ * rsi_module_exit() - This function unregisters the sdio module.
+ * @void: Void.
+ *
+ * Return: None.
+ */
+static void rsi_module_exit(void)
+{
+	sdio_unregister_driver(&rsi_driver);
+	rsi_dbg(INFO_ZONE, "%s: Unregistering driver\n", __func__);
+}
+
+module_init(rsi_module_init);
+module_exit(rsi_module_exit);
+
+MODULE_AUTHOR("Redpine Signals Inc");
+MODULE_DESCRIPTION("Common SDIO layer for RSI drivers");
+MODULE_SUPPORTED_DEVICE("RSI-91x");
+MODULE_DEVICE_TABLE(sdio, rsi_dev_table);
+MODULE_FIRMWARE(FIRMWARE_RSI9113);
+MODULE_VERSION("0.1");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/net/wireless/rsi/rsi_91x_sdio_ops.c b/drivers/net/wireless/rsi/rsi_91x_sdio_ops.c
new file mode 100644
index 000000000000..f1cb99cafed8
--- /dev/null
+++ b/drivers/net/wireless/rsi/rsi_91x_sdio_ops.c
@@ -0,0 +1,566 @@
+/**
+ * Copyright (c) 2014 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/firmware.h>
+#include "rsi_sdio.h"
+#include "rsi_common.h"
+
+/**
+ * rsi_sdio_master_access_msword() - This function sets the AHB master access
+ *				     MS word in the SDIO slave registers.
+ * @adapter: Pointer to the adapter structure.
+ * @ms_word: ms word need to be initialized.
+ *
+ * Return: status: 0 on success, -1 on failure.
+ */
+static int rsi_sdio_master_access_msword(struct rsi_hw *adapter,
+					 u16 ms_word)
+{
+	u8 byte;
+	u8 function = 0;
+	int status = 0;
+
+	byte = (u8)(ms_word & 0x00FF);
+
+	rsi_dbg(INIT_ZONE,
+		"%s: MASTER_ACCESS_MSBYTE:0x%x\n", __func__, byte);
+
+	status = rsi_sdio_write_register(adapter,
+					 function,
+					 SDIO_MASTER_ACCESS_MSBYTE,
+					 &byte);
+	if (status) {
+		rsi_dbg(ERR_ZONE,
+			"%s: fail to access MASTER_ACCESS_MSBYTE\n",
+			__func__);
+		return -1;
+	}
+
+	byte = (u8)(ms_word >> 8);
+
+	rsi_dbg(INIT_ZONE, "%s:MASTER_ACCESS_LSBYTE:0x%x\n", __func__, byte);
+	status = rsi_sdio_write_register(adapter,
+					 function,
+					 SDIO_MASTER_ACCESS_LSBYTE,
+					 &byte);
+	return status;
+}
+
+/**
+ * rsi_copy_to_card() - This function includes the actual funtionality of
+ *			copying the TA firmware to the card.Basically this
+ *			function includes opening the TA file,reading the
+ *			TA file and writing their values in blocks of data.
+ * @common: Pointer to the driver private structure.
+ * @fw: Pointer to the firmware value to be written.
+ * @len: length of firmware file.
+ * @num_blocks: Number of blocks to be written to the card.
+ *
+ * Return: 0 on success and -1 on failure.
+ */
+static int rsi_copy_to_card(struct rsi_common *common,
+			    const u8 *fw,
+			    u32 len,
+			    u32 num_blocks)
+{
+	struct rsi_hw *adapter = common->priv;
+	struct rsi_91x_sdiodev *dev =
+		(struct rsi_91x_sdiodev *)adapter->rsi_dev;
+	u32 indx, ii;
+	u32 block_size = dev->tx_blk_size;
+	u32 lsb_address;
+	__le32 data[] = { TA_HOLD_THREAD_VALUE, TA_SOFT_RST_CLR,
+			  TA_PC_ZERO, TA_RELEASE_THREAD_VALUE };
+	u32 address[] = { TA_HOLD_THREAD_REG, TA_SOFT_RESET_REG,
+			  TA_TH0_PC_REG, TA_RELEASE_THREAD_REG };
+	u32 base_address;
+	u16 msb_address;
+
+	base_address = TA_LOAD_ADDRESS;
+	msb_address = base_address >> 16;
+
+	for (indx = 0, ii = 0; ii < num_blocks; ii++, indx += block_size) {
+		lsb_address = ((u16) base_address | RSI_SD_REQUEST_MASTER);
+		if (rsi_sdio_write_register_multiple(adapter,
+						     lsb_address,
+						     (u8 *)(fw + indx),
+						     block_size)) {
+			rsi_dbg(ERR_ZONE,
+				"%s: Unable to load %s blk\n", __func__,
+				FIRMWARE_RSI9113);
+			return -1;
+		}
+		rsi_dbg(INIT_ZONE, "%s: loading block: %d\n", __func__, ii);
+		base_address += block_size;
+		if ((base_address >> 16) != msb_address) {
+			msb_address += 1;
+			if (rsi_sdio_master_access_msword(adapter,
+							  msb_address)) {
+				rsi_dbg(ERR_ZONE,
+					"%s: Unable to set ms word reg\n",
+					__func__);
+				return -1;
+			}
+		}
+	}
+
+	if (len % block_size) {
+		lsb_address = ((u16) base_address | RSI_SD_REQUEST_MASTER);
+		if (rsi_sdio_write_register_multiple(adapter,
+						     lsb_address,
+						     (u8 *)(fw + indx),
+						     len % block_size)) {
+			rsi_dbg(ERR_ZONE,
+				"%s: Unable to load f/w\n", __func__);
+			return -1;
+		}
+	}
+	rsi_dbg(INIT_ZONE,
+		"%s: Succesfully loaded TA instructions\n", __func__);
+
+	if (rsi_sdio_master_access_msword(adapter, TA_BASE_ADDR)) {
+		rsi_dbg(ERR_ZONE,
+			"%s: Unable to set ms word to common reg\n",
+			__func__);
+		return -1;
+	}
+
+	for (ii = 0; ii < ARRAY_SIZE(data); ii++) {
+		/* Bringing TA out of reset */
+		if (rsi_sdio_write_register_multiple(adapter,
+						     (address[ii] |
+						     RSI_SD_REQUEST_MASTER),
+						     (u8 *)&data[ii],
+						     4)) {
+			rsi_dbg(ERR_ZONE,
+				"%s: Unable to hold TA threads\n", __func__);
+			return -1;
+		}
+	}
+
+	rsi_dbg(INIT_ZONE, "%s: loaded firmware\n", __func__);
+	return 0;
+}
+
+/**
+ * rsi_load_ta_instructions() - This function includes the actual funtionality
+ *				of loading the TA firmware.This function also
+ *				includes opening the TA file,reading the TA
+ *				file and writing their value in blocks of data.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: status: 0 on success, -1 on failure.
+ */
+static int rsi_load_ta_instructions(struct rsi_common *common)
+{
+	struct rsi_hw *adapter = common->priv;
+	struct rsi_91x_sdiodev *dev =
+		(struct rsi_91x_sdiodev *)adapter->rsi_dev;
+	u32 len;
+	u32 num_blocks;
+	const u8 *fw;
+	const struct firmware *fw_entry = NULL;
+	u32 block_size = dev->tx_blk_size;
+	int status = 0;
+	u32 base_address;
+	u16 msb_address;
+
+	if (rsi_sdio_master_access_msword(adapter, TA_BASE_ADDR)) {
+		rsi_dbg(ERR_ZONE,
+			"%s: Unable to set ms word to common reg\n",
+			__func__);
+		return -1;
+	}
+	base_address = TA_LOAD_ADDRESS;
+	msb_address = (base_address >> 16);
+
+	if (rsi_sdio_master_access_msword(adapter, msb_address)) {
+		rsi_dbg(ERR_ZONE,
+			"%s: Unable to set ms word reg\n", __func__);
+		return -1;
+	}
+
+	status = request_firmware(&fw_entry, FIRMWARE_RSI9113, adapter->device);
+	if (status < 0) {
+		rsi_dbg(ERR_ZONE, "%s Firmware file %s not found\n",
+			__func__, FIRMWARE_RSI9113);
+		return status;
+	}
+
+	fw = kmemdup(fw_entry->data, fw_entry->size, GFP_KERNEL);
+	len = fw_entry->size;
+
+	if (len % 4)
+		len += (4 - (len % 4));
+
+	num_blocks = (len / block_size);
+
+	rsi_dbg(INIT_ZONE, "%s: Instruction size:%d\n", __func__, len);
+	rsi_dbg(INIT_ZONE, "%s: num blocks: %d\n", __func__, num_blocks);
+
+	status = rsi_copy_to_card(common, fw, len, num_blocks);
+	release_firmware(fw_entry);
+	return status;
+}
+
+/**
+ * rsi_process_pkt() - This Function reads rx_blocks register and figures out
+ *		       the size of the rx pkt.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+static int rsi_process_pkt(struct rsi_common *common)
+{
+	struct rsi_hw *adapter = common->priv;
+	u8 num_blks = 0;
+	u32 rcv_pkt_len = 0;
+	int status = 0;
+
+	status = rsi_sdio_read_register(adapter,
+					SDIO_RX_NUM_BLOCKS_REG,
+					&num_blks);
+
+	if (status) {
+		rsi_dbg(ERR_ZONE,
+			"%s: Failed to read pkt length from the card:\n",
+			__func__);
+		return status;
+	}
+	rcv_pkt_len = (num_blks * 256);
+
+	common->rx_data_pkt = kmalloc(rcv_pkt_len, GFP_KERNEL);
+	if (!common->rx_data_pkt) {
+		rsi_dbg(ERR_ZONE, "%s: Failed in memory allocation\n",
+			__func__);
+		return -1;
+	}
+
+	status = rsi_sdio_host_intf_read_pkt(adapter,
+					     common->rx_data_pkt,
+					     rcv_pkt_len);
+	if (status) {
+		rsi_dbg(ERR_ZONE, "%s: Failed to read packet from card\n",
+			__func__);
+		goto fail;
+	}
+
+	status = rsi_read_pkt(common, rcv_pkt_len);
+	kfree(common->rx_data_pkt);
+	return status;
+
+fail:
+	kfree(common->rx_data_pkt);
+	return -1;
+}
+
+/**
+ * rsi_init_sdio_slave_regs() - This function does the actual initialization
+ *				of SDBUS slave registers.
+ * @adapter: Pointer to the adapter structure.
+ *
+ * Return: status: 0 on success, -1 on failure.
+ */
+int rsi_init_sdio_slave_regs(struct rsi_hw *adapter)
+{
+	struct rsi_91x_sdiodev *dev =
+		(struct rsi_91x_sdiodev *)adapter->rsi_dev;
+	u8 function = 0;
+	u8 byte;
+	int status = 0;
+
+	if (dev->next_read_delay) {
+		byte = dev->next_read_delay;
+		status = rsi_sdio_write_register(adapter,
+						 function,
+						 SDIO_NXT_RD_DELAY2,
+						 &byte);
+		if (status) {
+			rsi_dbg(ERR_ZONE,
+				"%s: Failed to write SDIO_NXT_RD_DELAY2\n",
+				__func__);
+			return -1;
+		}
+	}
+
+	if (dev->sdio_high_speed_enable) {
+		rsi_dbg(INIT_ZONE, "%s: Enabling SDIO High speed\n", __func__);
+		byte = 0x3;
+
+		status = rsi_sdio_write_register(adapter,
+						 function,
+						 SDIO_REG_HIGH_SPEED,
+						 &byte);
+		if (status) {
+			rsi_dbg(ERR_ZONE,
+				"%s: Failed to enable SDIO high speed\n",
+				__func__);
+			return -1;
+		}
+	}
+
+	/* This tells SDIO FIFO when to start read to host */
+	rsi_dbg(INIT_ZONE, "%s: Initialzing SDIO read start level\n", __func__);
+	byte = 0x24;
+
+	status = rsi_sdio_write_register(adapter,
+					 function,
+					 SDIO_READ_START_LVL,
+					 &byte);
+	if (status) {
+		rsi_dbg(ERR_ZONE,
+			"%s: Failed to write SDIO_READ_START_LVL\n", __func__);
+		return -1;
+	}
+
+	rsi_dbg(INIT_ZONE, "%s: Initialzing FIFO ctrl registers\n", __func__);
+	byte = (128 - 32);
+
+	status = rsi_sdio_write_register(adapter,
+					 function,
+					 SDIO_READ_FIFO_CTL,
+					 &byte);
+	if (status) {
+		rsi_dbg(ERR_ZONE,
+			"%s: Failed to write SDIO_READ_FIFO_CTL\n", __func__);
+		return -1;
+	}
+
+	byte = 32;
+	status = rsi_sdio_write_register(adapter,
+					 function,
+					 SDIO_WRITE_FIFO_CTL,
+					 &byte);
+	if (status) {
+		rsi_dbg(ERR_ZONE,
+			"%s: Failed to write SDIO_WRITE_FIFO_CTL\n", __func__);
+		return -1;
+	}
+
+	return 0;
+}
+
+/**
+ * rsi_interrupt_handler() - This function read and process SDIO interrupts.
+ * @adapter: Pointer to the adapter structure.
+ *
+ * Return: None.
+ */
+void rsi_interrupt_handler(struct rsi_hw *adapter)
+{
+	struct rsi_common *common = adapter->priv;
+	struct rsi_91x_sdiodev *dev =
+		(struct rsi_91x_sdiodev *)adapter->rsi_dev;
+	int status;
+	enum sdio_interrupt_type isr_type;
+	u8 isr_status = 0;
+	u8 fw_status = 0;
+
+	dev->rx_info.sdio_int_counter++;
+
+	do {
+		mutex_lock(&common->tx_rxlock);
+		status = rsi_sdio_read_register(common->priv,
+						RSI_FN1_INT_REGISTER,
+						&isr_status);
+		if (status) {
+			rsi_dbg(ERR_ZONE,
+				"%s: Failed to Read Intr Status Register\n",
+				__func__);
+			mutex_unlock(&common->tx_rxlock);
+			return;
+		}
+
+		if (isr_status == 0) {
+			rsi_set_event(&common->tx_thread.event);
+			dev->rx_info.sdio_intr_status_zero++;
+			mutex_unlock(&common->tx_rxlock);
+			return;
+		}
+
+		rsi_dbg(ISR_ZONE, "%s: Intr_status = %x %d %d\n",
+			__func__, isr_status, (1 << MSDU_PKT_PENDING),
+			(1 << FW_ASSERT_IND));
+
+		do {
+			RSI_GET_SDIO_INTERRUPT_TYPE(isr_status, isr_type);
+
+			switch (isr_type) {
+			case BUFFER_AVAILABLE:
+				dev->rx_info.watch_bufferfull_count = 0;
+				dev->rx_info.buffer_full = false;
+				dev->rx_info.mgmt_buffer_full = false;
+				rsi_sdio_ack_intr(common->priv,
+						  (1 << PKT_BUFF_AVAILABLE));
+				rsi_set_event((&common->tx_thread.event));
+				rsi_dbg(ISR_ZONE,
+					"%s: ==> BUFFER_AVILABLE <==\n",
+					__func__);
+				dev->rx_info.buf_avilable_counter++;
+				break;
+
+			case FIRMWARE_ASSERT_IND:
+				rsi_dbg(ERR_ZONE,
+					"%s: ==> FIRMWARE Assert <==\n",
+					__func__);
+				status = rsi_sdio_read_register(common->priv,
+							SDIO_FW_STATUS_REG,
+							&fw_status);
+				if (status) {
+					rsi_dbg(ERR_ZONE,
+						"%s: Failed to read f/w reg\n",
+						__func__);
+				} else {
+					rsi_dbg(ERR_ZONE,
+						"%s: Firmware Status is 0x%x\n",
+						__func__ , fw_status);
+					rsi_sdio_ack_intr(common->priv,
+							  (1 << FW_ASSERT_IND));
+				}
+
+				common->fsm_state = FSM_CARD_NOT_READY;
+				break;
+
+			case MSDU_PACKET_PENDING:
+				rsi_dbg(ISR_ZONE, "Pkt pending interrupt\n");
+				dev->rx_info.total_sdio_msdu_pending_intr++;
+
+				status = rsi_process_pkt(common);
+				if (status) {
+					rsi_dbg(ERR_ZONE,
+						"%s: Failed to read pkt\n",
+						__func__);
+					mutex_unlock(&common->tx_rxlock);
+					return;
+				}
+				break;
+			default:
+				rsi_sdio_ack_intr(common->priv, isr_status);
+				dev->rx_info.total_sdio_unknown_intr++;
+				isr_status = 0;
+				rsi_dbg(ISR_ZONE,
+					"Unknown Interrupt %x\n",
+					isr_status);
+				break;
+			}
+			isr_status ^= BIT(isr_type - 1);
+		} while (isr_status);
+		mutex_unlock(&common->tx_rxlock);
+	} while (1);
+}
+
+/**
+ * rsi_device_init() - This Function Initializes The HAL.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+int rsi_sdio_device_init(struct rsi_common *common)
+{
+	if (rsi_load_ta_instructions(common))
+		return -1;
+
+	if (rsi_sdio_master_access_msword(common->priv, MISC_CFG_BASE_ADDR)) {
+		rsi_dbg(ERR_ZONE, "%s: Unable to set ms word reg\n",
+			__func__);
+		return -1;
+	}
+	rsi_dbg(INIT_ZONE,
+		"%s: Setting ms word to 0x41050000\n", __func__);
+
+	return 0;
+}
+
+/**
+ * rsi_sdio_read_buffer_status_register() - This function is used to the read
+ *					    buffer status register and set
+ *					    relevant fields in
+ *					    rsi_91x_sdiodev struct.
+ * @adapter: Pointer to the driver hw structure.
+ * @q_num: The Q number whose status is to be found.
+ *
+ * Return: status: -1 on failure or else queue full/stop is indicated.
+ */
+int rsi_sdio_read_buffer_status_register(struct rsi_hw *adapter, u8 q_num)
+{
+	struct rsi_common *common = adapter->priv;
+	struct rsi_91x_sdiodev *dev =
+		(struct rsi_91x_sdiodev *)adapter->rsi_dev;
+	u8 buf_status = 0;
+	int status = 0;
+
+	status = rsi_sdio_read_register(common->priv,
+					RSI_DEVICE_BUFFER_STATUS_REGISTER,
+					&buf_status);
+
+	if (status) {
+		rsi_dbg(ERR_ZONE,
+			"%s: Failed to read status register\n", __func__);
+		return -1;
+	}
+
+	if (buf_status & (BIT(PKT_MGMT_BUFF_FULL))) {
+		if (!dev->rx_info.mgmt_buffer_full)
+			dev->rx_info.mgmt_buf_full_counter++;
+		dev->rx_info.mgmt_buffer_full = true;
+	} else {
+		dev->rx_info.mgmt_buffer_full = false;
+	}
+
+	if (buf_status & (BIT(PKT_BUFF_FULL))) {
+		if (!dev->rx_info.buffer_full)
+			dev->rx_info.buf_full_counter++;
+		dev->rx_info.buffer_full = true;
+	} else {
+		dev->rx_info.buffer_full = false;
+	}
+
+	if (buf_status & (BIT(PKT_BUFF_SEMI_FULL))) {
+		if (!dev->rx_info.semi_buffer_full)
+			dev->rx_info.buf_semi_full_counter++;
+		dev->rx_info.semi_buffer_full = true;
+	} else {
+		dev->rx_info.semi_buffer_full = false;
+	}
+
+	if ((q_num == MGMT_SOFT_Q) && (dev->rx_info.mgmt_buffer_full))
+		return QUEUE_FULL;
+
+	if (dev->rx_info.buffer_full)
+		return QUEUE_FULL;
+
+	return QUEUE_NOT_FULL;
+}
+
+/**
+ * rsi_sdio_determine_event_timeout() - This Function determines the event
+ *					timeout duration.
+ * @adapter: Pointer to the adapter structure.
+ *
+ * Return: timeout duration is returned.
+ */
+int rsi_sdio_determine_event_timeout(struct rsi_hw *adapter)
+{
+	struct rsi_91x_sdiodev *dev =
+		(struct rsi_91x_sdiodev *)adapter->rsi_dev;
+
+	/* Once buffer full is seen, event timeout to occur every 2 msecs */
+	if (dev->rx_info.buffer_full)
+		return 2;
+
+	return EVENT_WAIT_FOREVER;
+}
diff --git a/drivers/net/wireless/rsi/rsi_91x_usb.c b/drivers/net/wireless/rsi/rsi_91x_usb.c
new file mode 100644
index 000000000000..bb1bf96670eb
--- /dev/null
+++ b/drivers/net/wireless/rsi/rsi_91x_usb.c
@@ -0,0 +1,575 @@
+/**
+ * Copyright (c) 2014 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/module.h>
+#include "rsi_usb.h"
+
+/**
+ * rsi_usb_card_write() - This function writes to the USB Card.
+ * @adapter: Pointer to the adapter structure.
+ * @buf: Pointer to the buffer from where the data has to be taken.
+ * @len: Length to be written.
+ * @endpoint: Type of endpoint.
+ *
+ * Return: status: 0 on success, -1 on failure.
+ */
+static int rsi_usb_card_write(struct rsi_hw *adapter,
+			      void *buf,
+			      u16 len,
+			      u8 endpoint)
+{
+	struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
+	int status;
+	s32 transfer;
+
+	status = usb_bulk_msg(dev->usbdev,
+			      usb_sndbulkpipe(dev->usbdev,
+			      dev->bulkout_endpoint_addr[endpoint - 1]),
+			      buf,
+			      len,
+			      &transfer,
+			      HZ * 5);
+
+	if (status < 0) {
+		rsi_dbg(ERR_ZONE,
+			"Card write failed with error code :%10d\n", status);
+		dev->write_fail = 1;
+	}
+	return status;
+}
+
+/**
+ * rsi_write_multiple() - This function writes multiple bytes of information
+ *			  to the USB card.
+ * @adapter: Pointer to the adapter structure.
+ * @addr: Address of the register.
+ * @data: Pointer to the data that has to be written.
+ * @count: Number of multiple bytes to be written.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+static int rsi_write_multiple(struct rsi_hw *adapter,
+			      u8 endpoint,
+			      u8 *data,
+			      u32 count)
+{
+	struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
+	u8 *seg = dev->tx_buffer;
+
+	if (dev->write_fail)
+		return 0;
+
+	if (endpoint == MGMT_EP) {
+		memset(seg, 0, RSI_USB_TX_HEAD_ROOM);
+		memcpy(seg + RSI_USB_TX_HEAD_ROOM, data, count);
+	} else {
+		seg = ((u8 *)data - RSI_USB_TX_HEAD_ROOM);
+	}
+
+	return rsi_usb_card_write(adapter,
+				  seg,
+				  count + RSI_USB_TX_HEAD_ROOM,
+				  endpoint);
+}
+
+/**
+ * rsi_find_bulk_in_and_out_endpoints() - This function initializes the bulk
+ *					  endpoints to the device.
+ * @interface: Pointer to the USB interface structure.
+ * @adapter: Pointer to the adapter structure.
+ *
+ * Return: ret_val: 0 on success, -ENOMEM on failure.
+ */
+static int rsi_find_bulk_in_and_out_endpoints(struct usb_interface *interface,
+					      struct rsi_hw *adapter)
+{
+	struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
+	struct usb_host_interface *iface_desc;
+	struct usb_endpoint_descriptor *endpoint;
+	__le16 buffer_size;
+	int ii, bep_found = 0;
+
+	iface_desc = &(interface->altsetting[0]);
+
+	for (ii = 0; ii < iface_desc->desc.bNumEndpoints; ++ii) {
+		endpoint = &(iface_desc->endpoint[ii].desc);
+
+		if ((!(dev->bulkin_endpoint_addr)) &&
+		    (endpoint->bEndpointAddress & USB_DIR_IN) &&
+		    ((endpoint->bmAttributes &
+		    USB_ENDPOINT_XFERTYPE_MASK) ==
+		    USB_ENDPOINT_XFER_BULK)) {
+			buffer_size = endpoint->wMaxPacketSize;
+			dev->bulkin_size = buffer_size;
+			dev->bulkin_endpoint_addr =
+				endpoint->bEndpointAddress;
+		}
+
+		if (!dev->bulkout_endpoint_addr[bep_found] &&
+		    !(endpoint->bEndpointAddress & USB_DIR_IN) &&
+		    ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+		      USB_ENDPOINT_XFER_BULK)) {
+			dev->bulkout_endpoint_addr[bep_found] =
+				endpoint->bEndpointAddress;
+			buffer_size = endpoint->wMaxPacketSize;
+			dev->bulkout_size[bep_found] = buffer_size;
+			bep_found++;
+		}
+
+		if (bep_found >= MAX_BULK_EP)
+			break;
+	}
+
+	if (!(dev->bulkin_endpoint_addr) &&
+	    (dev->bulkout_endpoint_addr[0]))
+		return -EINVAL;
+
+	return 0;
+}
+
+/* rsi_usb_reg_read() - This function reads data from given register address.
+ * @usbdev: Pointer to the usb_device structure.
+ * @reg: Address of the register to be read.
+ * @value: Value to be read.
+ * @len: length of data to be read.
+ *
+ * Return: status: 0 on success, -1 on failure.
+ */
+static int rsi_usb_reg_read(struct usb_device *usbdev,
+			    u32 reg,
+			    u16 *value,
+			    u16 len)
+{
+	u8 temp_buf[4];
+	int status = 0;
+
+	status = usb_control_msg(usbdev,
+				 usb_rcvctrlpipe(usbdev, 0),
+				 USB_VENDOR_REGISTER_READ,
+				 USB_TYPE_VENDOR,
+				 ((reg & 0xffff0000) >> 16), (reg & 0xffff),
+				 (void *)temp_buf,
+				 len,
+				 HZ * 5);
+
+	*value = (temp_buf[0] | (temp_buf[1] << 8));
+	if (status < 0) {
+		rsi_dbg(ERR_ZONE,
+			"%s: Reg read failed with error code :%d\n",
+			__func__, status);
+	}
+	return status;
+}
+
+/**
+ * rsi_usb_reg_write() - This function writes the given data into the given
+ *			 register address.
+ * @usbdev: Pointer to the usb_device structure.
+ * @reg: Address of the register.
+ * @value: Value to write.
+ * @len: Length of data to be written.
+ *
+ * Return: status: 0 on success, -1 on failure.
+ */
+static int rsi_usb_reg_write(struct usb_device *usbdev,
+			     u32 reg,
+			     u16 value,
+			     u16 len)
+{
+	u8 usb_reg_buf[4];
+	int status = 0;
+
+	usb_reg_buf[0] = (value & 0x00ff);
+	usb_reg_buf[1] = (value & 0xff00) >> 8;
+	usb_reg_buf[2] = 0x0;
+	usb_reg_buf[3] = 0x0;
+
+	status = usb_control_msg(usbdev,
+				 usb_sndctrlpipe(usbdev, 0),
+				 USB_VENDOR_REGISTER_WRITE,
+				 USB_TYPE_VENDOR,
+				 ((reg & 0xffff0000) >> 16),
+				 (reg & 0xffff),
+				 (void *)usb_reg_buf,
+				 len,
+				 HZ * 5);
+	if (status < 0) {
+		rsi_dbg(ERR_ZONE,
+			"%s: Reg write failed with error code :%d\n",
+			__func__, status);
+	}
+	return status;
+}
+
+/**
+ * rsi_rx_done_handler() - This function is called when a packet is received
+ *			   from USB stack. This is callback to recieve done.
+ * @urb: Received URB.
+ *
+ * Return: None.
+ */
+static void rsi_rx_done_handler(struct urb *urb)
+{
+	struct rsi_hw *adapter = urb->context;
+	struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
+
+	if (urb->status)
+		return;
+
+	rsi_set_event(&dev->rx_thread.event);
+}
+
+/**
+ * rsi_rx_urb_submit() - This function submits the given URB to the USB stack.
+ * @adapter: Pointer to the adapter structure.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+static int rsi_rx_urb_submit(struct rsi_hw *adapter)
+{
+	struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
+	struct urb *urb = dev->rx_usb_urb[0];
+	int status;
+
+	usb_fill_bulk_urb(urb,
+			  dev->usbdev,
+			  usb_rcvbulkpipe(dev->usbdev,
+				dev->bulkin_endpoint_addr),
+			  urb->transfer_buffer,
+			  3000,
+			  rsi_rx_done_handler,
+			  adapter);
+
+	status = usb_submit_urb(urb, GFP_KERNEL);
+	if (status)
+		rsi_dbg(ERR_ZONE, "%s: Failed in urb submission\n", __func__);
+
+	return status;
+}
+
+/**
+ * rsi_usb_write_register_multiple() - This function writes multiple bytes of
+ *				       information to multiple registers.
+ * @adapter: Pointer to the adapter structure.
+ * @addr: Address of the register.
+ * @data: Pointer to the data that has to be written.
+ * @count: Number of multiple bytes to be written on to the registers.
+ *
+ * Return: status: 0 on success, -1 on failure.
+ */
+int rsi_usb_write_register_multiple(struct rsi_hw *adapter,
+				    u32 addr,
+				    u8 *data,
+				    u32 count)
+{
+	struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
+	u8 *buf;
+	u8 transfer;
+	int status = 0;
+
+	buf = kzalloc(4096, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	while (count) {
+		transfer = min_t(int, count, 4096);
+		memcpy(buf, data, transfer);
+		status = usb_control_msg(dev->usbdev,
+					 usb_sndctrlpipe(dev->usbdev, 0),
+					 USB_VENDOR_REGISTER_WRITE,
+					 USB_TYPE_VENDOR,
+					 ((addr & 0xffff0000) >> 16),
+					 (addr & 0xffff),
+					 (void *)buf,
+					 transfer,
+					 HZ * 5);
+		if (status < 0) {
+			rsi_dbg(ERR_ZONE,
+				"Reg write failed with error code :%d\n",
+				status);
+		} else {
+			count -= transfer;
+			data += transfer;
+			addr += transfer;
+		}
+	}
+
+	kfree(buf);
+	return 0;
+}
+
+/**
+ *rsi_usb_host_intf_write_pkt() - This function writes the packet to the
+ *				   USB card.
+ * @adapter: Pointer to the adapter structure.
+ * @pkt: Pointer to the data to be written on to the card.
+ * @len: Length of the data to be written on to the card.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+static int rsi_usb_host_intf_write_pkt(struct rsi_hw *adapter,
+				       u8 *pkt,
+				       u32 len)
+{
+	u32 queueno = ((pkt[1] >> 4) & 0xf);
+	u8 endpoint;
+
+	endpoint = ((queueno == RSI_WIFI_MGMT_Q) ? MGMT_EP : DATA_EP);
+
+	return rsi_write_multiple(adapter,
+				  endpoint,
+				  (u8 *)pkt,
+				  len);
+}
+
+/**
+ * rsi_deinit_usb_interface() - This function deinitializes the usb interface.
+ * @adapter: Pointer to the adapter structure.
+ *
+ * Return: None.
+ */
+static void rsi_deinit_usb_interface(struct rsi_hw *adapter)
+{
+	struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
+
+	rsi_kill_thread(&dev->rx_thread);
+	kfree(adapter->priv->rx_data_pkt);
+	kfree(dev->tx_buffer);
+}
+
+/**
+ * rsi_init_usb_interface() - This function initializes the usb interface.
+ * @adapter: Pointer to the adapter structure.
+ * @pfunction: Pointer to USB interface structure.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+static int rsi_init_usb_interface(struct rsi_hw *adapter,
+				  struct usb_interface *pfunction)
+{
+	struct rsi_91x_usbdev *rsi_dev;
+	struct rsi_common *common = adapter->priv;
+	int status;
+
+	rsi_dev = kzalloc(sizeof(*rsi_dev), GFP_KERNEL);
+	if (!rsi_dev)
+		return -ENOMEM;
+
+	adapter->rsi_dev = rsi_dev;
+	rsi_dev->usbdev = interface_to_usbdev(pfunction);
+
+	if (rsi_find_bulk_in_and_out_endpoints(pfunction, adapter))
+		return -EINVAL;
+
+	adapter->device = &pfunction->dev;
+	usb_set_intfdata(pfunction, adapter);
+
+	common->rx_data_pkt = kmalloc(2048, GFP_KERNEL);
+	if (!common->rx_data_pkt) {
+		rsi_dbg(ERR_ZONE, "%s: Failed to allocate memory\n",
+			__func__);
+		return -ENOMEM;
+	}
+
+	rsi_dev->tx_buffer = kmalloc(2048, GFP_ATOMIC);
+	rsi_dev->rx_usb_urb[0] = usb_alloc_urb(0, GFP_KERNEL);
+	rsi_dev->rx_usb_urb[0]->transfer_buffer = adapter->priv->rx_data_pkt;
+	rsi_dev->tx_blk_size = 252;
+
+	/* Initializing function callbacks */
+	adapter->rx_urb_submit = rsi_rx_urb_submit;
+	adapter->host_intf_write_pkt = rsi_usb_host_intf_write_pkt;
+	adapter->check_hw_queue_status = rsi_usb_check_queue_status;
+	adapter->determine_event_timeout = rsi_usb_event_timeout;
+
+	rsi_init_event(&rsi_dev->rx_thread.event);
+	status = rsi_create_kthread(common, &rsi_dev->rx_thread,
+				    rsi_usb_rx_thread, "RX-Thread");
+	if (status) {
+		rsi_dbg(ERR_ZONE, "%s: Unable to init rx thrd\n", __func__);
+		goto fail;
+	}
+
+#ifdef CONFIG_RSI_DEBUGFS
+	/* In USB, one less than the MAX_DEBUGFS_ENTRIES entries is required */
+	adapter->num_debugfs_entries = (MAX_DEBUGFS_ENTRIES - 1);
+#endif
+
+	rsi_dbg(INIT_ZONE, "%s: Enabled the interface\n", __func__);
+	return 0;
+
+fail:
+	kfree(rsi_dev->tx_buffer);
+	kfree(common->rx_data_pkt);
+	return status;
+}
+
+/**
+ * rsi_probe() - This function is called by kernel when the driver provided
+ *		 Vendor and device IDs are matched. All the initialization
+ *		 work is done here.
+ * @pfunction: Pointer to the USB interface structure.
+ * @id: Pointer to the usb_device_id structure.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+static int rsi_probe(struct usb_interface *pfunction,
+		     const struct usb_device_id *id)
+{
+	struct rsi_hw *adapter;
+	struct rsi_91x_usbdev *dev;
+	u16 fw_status;
+
+	rsi_dbg(INIT_ZONE, "%s: Init function called\n", __func__);
+
+	adapter = rsi_91x_init();
+	if (!adapter) {
+		rsi_dbg(ERR_ZONE, "%s: Failed to init os intf ops\n",
+			__func__);
+		return 1;
+	}
+
+	if (rsi_init_usb_interface(adapter, pfunction)) {
+		rsi_dbg(ERR_ZONE, "%s: Failed to init usb interface\n",
+			__func__);
+		goto err;
+	}
+
+	rsi_dbg(ERR_ZONE, "%s: Initialized os intf ops\n", __func__);
+
+	dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
+
+	if (rsi_usb_reg_read(dev->usbdev, FW_STATUS_REG, &fw_status, 2) < 0)
+		goto err1;
+	else
+		fw_status &= 1;
+
+	if (!fw_status) {
+		if (rsi_usb_device_init(adapter->priv)) {
+			rsi_dbg(ERR_ZONE, "%s: Failed in device init\n",
+				__func__);
+			goto err1;
+		}
+
+		if (rsi_usb_reg_write(dev->usbdev,
+				      USB_INTERNAL_REG_1,
+				      RSI_USB_READY_MAGIC_NUM, 1) < 0)
+			goto err1;
+		rsi_dbg(INIT_ZONE, "%s: Performed device init\n", __func__);
+	}
+
+	if (rsi_rx_urb_submit(adapter))
+		goto err1;
+
+	return 0;
+err1:
+	rsi_deinit_usb_interface(adapter);
+err:
+	rsi_91x_deinit(adapter);
+	rsi_dbg(ERR_ZONE, "%s: Failed in probe...Exiting\n", __func__);
+	return 1;
+}
+
+/**
+ * rsi_disconnect() - This function performs the reverse of the probe function,
+ *		      it deintialize the driver structure.
+ * @pfunction: Pointer to the USB interface structure.
+ *
+ * Return: None.
+ */
+static void rsi_disconnect(struct usb_interface *pfunction)
+{
+	struct rsi_hw *adapter = usb_get_intfdata(pfunction);
+
+	if (!adapter)
+		return;
+
+	rsi_mac80211_detach(adapter);
+	rsi_deinit_usb_interface(adapter);
+	rsi_91x_deinit(adapter);
+
+	rsi_dbg(INFO_ZONE, "%s: Deinitialization completed\n", __func__);
+}
+
+#ifdef CONFIG_PM
+static int rsi_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	/* Not yet implemented */
+	return -ENOSYS;
+}
+
+static int rsi_resume(struct usb_interface *intf)
+{
+	/* Not yet implemented */
+	return -ENOSYS;
+}
+#endif
+
+static const struct usb_device_id rsi_dev_table[] = {
+	{ USB_DEVICE(0x0303, 0x0100) },
+	{ USB_DEVICE(0x041B, 0x0301) },
+	{ USB_DEVICE(0x041B, 0x0201) },
+	{ USB_DEVICE(0x041B, 0x9330) },
+	{ /* Blank */},
+};
+
+static struct usb_driver rsi_driver = {
+	.name       = "RSI-USB WLAN",
+	.probe      = rsi_probe,
+	.disconnect = rsi_disconnect,
+	.id_table   = rsi_dev_table,
+#ifdef CONFIG_PM
+	.suspend    = rsi_suspend,
+	.resume     = rsi_resume,
+#endif
+};
+
+/**
+ * rsi_module_init() - This function registers the client driver.
+ * @void: Void.
+ *
+ * Return: 0 on success.
+ */
+static int rsi_module_init(void)
+{
+	usb_register(&rsi_driver);
+	rsi_dbg(INIT_ZONE, "%s: Registering driver\n", __func__);
+	return 0;
+}
+
+/**
+ * rsi_module_exit() - This function unregisters the client driver.
+ * @void: Void.
+ *
+ * Return: None.
+ */
+static void rsi_module_exit(void)
+{
+	usb_deregister(&rsi_driver);
+	rsi_dbg(INFO_ZONE, "%s: Unregistering driver\n", __func__);
+}
+
+module_init(rsi_module_init);
+module_exit(rsi_module_exit);
+
+MODULE_AUTHOR("Redpine Signals Inc");
+MODULE_DESCRIPTION("Common USB layer for RSI drivers");
+MODULE_SUPPORTED_DEVICE("RSI-91x");
+MODULE_DEVICE_TABLE(usb, rsi_dev_table);
+MODULE_FIRMWARE(FIRMWARE_RSI9113);
+MODULE_VERSION("0.1");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/net/wireless/rsi/rsi_91x_usb_ops.c b/drivers/net/wireless/rsi/rsi_91x_usb_ops.c
new file mode 100644
index 000000000000..1106ce76707e
--- /dev/null
+++ b/drivers/net/wireless/rsi/rsi_91x_usb_ops.c
@@ -0,0 +1,177 @@
+/**
+ * Copyright (c) 2014 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/firmware.h>
+#include "rsi_usb.h"
+
+/**
+ * rsi_copy_to_card() - This function includes the actual funtionality of
+ *			copying the TA firmware to the card.Basically this
+ *			function includes opening the TA file,reading the TA
+ *			file and writing their values in blocks of data.
+ * @common: Pointer to the driver private structure.
+ * @fw: Pointer to the firmware value to be written.
+ * @len: length of firmware file.
+ * @num_blocks: Number of blocks to be written to the card.
+ *
+ * Return: 0 on success and -1 on failure.
+ */
+static int rsi_copy_to_card(struct rsi_common *common,
+			    const u8 *fw,
+			    u32 len,
+			    u32 num_blocks)
+{
+	struct rsi_hw *adapter = common->priv;
+	struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
+	u32 indx, ii;
+	u32 block_size = dev->tx_blk_size;
+	u32 lsb_address;
+	u32 base_address;
+
+	base_address = TA_LOAD_ADDRESS;
+
+	for (indx = 0, ii = 0; ii < num_blocks; ii++, indx += block_size) {
+		lsb_address = base_address;
+		if (rsi_usb_write_register_multiple(adapter,
+						    lsb_address,
+						    (u8 *)(fw + indx),
+						    block_size)) {
+			rsi_dbg(ERR_ZONE,
+				"%s: Unable to load %s blk\n", __func__,
+				FIRMWARE_RSI9113);
+			return -EIO;
+		}
+		rsi_dbg(INIT_ZONE, "%s: loading block: %d\n", __func__, ii);
+		base_address += block_size;
+	}
+
+	if (len % block_size) {
+		lsb_address = base_address;
+		if (rsi_usb_write_register_multiple(adapter,
+						    lsb_address,
+						    (u8 *)(fw + indx),
+						    len % block_size)) {
+			rsi_dbg(ERR_ZONE,
+				"%s: Unable to load %s blk\n", __func__,
+				FIRMWARE_RSI9113);
+			return -EIO;
+		}
+	}
+	rsi_dbg(INIT_ZONE,
+		"%s: Succesfully loaded %s instructions\n", __func__,
+		FIRMWARE_RSI9113);
+
+	rsi_dbg(INIT_ZONE, "%s: loaded firmware\n", __func__);
+	return 0;
+}
+
+/**
+ * rsi_usb_rx_thread() - This is a kernel thread to receive the packets from
+ *			 the USB device.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: None.
+ */
+void rsi_usb_rx_thread(struct rsi_common *common)
+{
+	struct rsi_hw *adapter = common->priv;
+	struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
+	int status;
+
+	do {
+		rsi_wait_event(&dev->rx_thread.event, EVENT_WAIT_FOREVER);
+
+		if (atomic_read(&dev->rx_thread.thread_done))
+			goto out;
+
+		mutex_lock(&common->tx_rxlock);
+		status = rsi_read_pkt(common, 0);
+		if (status) {
+			rsi_dbg(ERR_ZONE, "%s: Failed To read data", __func__);
+			mutex_unlock(&common->tx_rxlock);
+			return;
+		}
+		mutex_unlock(&common->tx_rxlock);
+		rsi_reset_event(&dev->rx_thread.event);
+		if (adapter->rx_urb_submit(adapter)) {
+			rsi_dbg(ERR_ZONE,
+				"%s: Failed in urb submission", __func__);
+			return;
+		}
+	} while (1);
+
+out:
+	rsi_dbg(INFO_ZONE, "%s: Terminated thread\n", __func__);
+	complete_and_exit(&dev->rx_thread.completion, 0);
+}
+
+
+/**
+ * rsi_load_ta_instructions() - This function includes the actual funtionality
+ *				of loading the TA firmware.This function also
+ *				includes opening the TA file,reading the TA
+ *				file and writing their value in blocks of data.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: status: 0 on success, -1 on failure.
+ */
+static int rsi_load_ta_instructions(struct rsi_common *common)
+{
+	struct rsi_hw *adapter = common->priv;
+	struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
+	const struct firmware *fw_entry = NULL;
+	u32 block_size = dev->tx_blk_size;
+	const u8 *fw;
+	u32 num_blocks, len;
+	int status = 0;
+
+	status = request_firmware(&fw_entry, FIRMWARE_RSI9113, adapter->device);
+	if (status < 0) {
+		rsi_dbg(ERR_ZONE, "%s Firmware file %s not found\n",
+			__func__, FIRMWARE_RSI9113);
+		return status;
+	}
+
+	fw = kmemdup(fw_entry->data, fw_entry->size, GFP_KERNEL);
+	len = fw_entry->size;
+
+	if (len % 4)
+		len += (4 - (len % 4));
+
+	num_blocks = (len / block_size);
+
+	rsi_dbg(INIT_ZONE, "%s: Instruction size:%d\n", __func__, len);
+	rsi_dbg(INIT_ZONE, "%s: num blocks: %d\n", __func__, num_blocks);
+
+	status = rsi_copy_to_card(common, fw, len, num_blocks);
+	release_firmware(fw_entry);
+	return status;
+}
+
+/**
+ * rsi_device_init() - This Function Initializes The HAL.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+int rsi_usb_device_init(struct rsi_common *common)
+{
+	if (rsi_load_ta_instructions(common))
+		return -EIO;
+
+	return 0;
+		}
diff --git a/drivers/net/wireless/rsi/rsi_boot_params.h b/drivers/net/wireless/rsi/rsi_boot_params.h
new file mode 100644
index 000000000000..5e2721f7909c
--- /dev/null
+++ b/drivers/net/wireless/rsi/rsi_boot_params.h
@@ -0,0 +1,126 @@
+/**
+ * Copyright (c) 2014 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef __RSI_BOOTPARAMS_HEADER_H__
+#define __RSI_BOOTPARAMS_HEADER_H__
+
+#define CRYSTAL_GOOD_TIME                BIT(0)
+#define BOOTUP_MODE_INFO                 BIT(1)
+#define WIFI_TAPLL_CONFIGS               BIT(5)
+#define WIFI_PLL960_CONFIGS              BIT(6)
+#define WIFI_AFEPLL_CONFIGS              BIT(7)
+#define WIFI_SWITCH_CLK_CONFIGS          BIT(8)
+
+#define TA_PLL_M_VAL_20                  8
+#define TA_PLL_N_VAL_20                  1
+#define TA_PLL_P_VAL_20                  4
+
+#define PLL960_M_VAL_20                  0x14
+#define PLL960_N_VAL_20                  0
+#define PLL960_P_VAL_20                  5
+
+#define UMAC_CLK_40MHZ                   40
+
+#define TA_PLL_M_VAL_40                  46
+#define TA_PLL_N_VAL_40                  3
+#define TA_PLL_P_VAL_40                  3
+
+#define PLL960_M_VAL_40                  0x14
+#define PLL960_N_VAL_40                  0
+#define PLL960_P_VAL_40                  5
+
+#define UMAC_CLK_20BW \
+	(((TA_PLL_M_VAL_20 + 1) * 40) / \
+	 ((TA_PLL_N_VAL_20 + 1) * (TA_PLL_P_VAL_20 + 1)))
+#define VALID_20 \
+	(WIFI_PLL960_CONFIGS | WIFI_AFEPLL_CONFIGS | WIFI_SWITCH_CLK_CONFIGS)
+#define UMAC_CLK_40BW   \
+	(((TA_PLL_M_VAL_40 + 1) * 40) / \
+	 ((TA_PLL_N_VAL_40 + 1) * (TA_PLL_P_VAL_40 + 1)))
+#define VALID_40 \
+	(WIFI_PLL960_CONFIGS | WIFI_AFEPLL_CONFIGS | WIFI_SWITCH_CLK_CONFIGS | \
+	 WIFI_TAPLL_CONFIGS | CRYSTAL_GOOD_TIME | BOOTUP_MODE_INFO)
+
+/* structure to store configs related to TAPLL programming */
+struct tapll_info {
+	__le16 pll_reg_1;
+	__le16 pll_reg_2;
+} __packed;
+
+/* structure to store configs related to PLL960 programming */
+struct pll960_info {
+	__le16 pll_reg_1;
+	__le16 pll_reg_2;
+	__le16 pll_reg_3;
+} __packed;
+
+/* structure to store configs related to AFEPLL programming */
+struct afepll_info {
+	__le16 pll_reg;
+} __packed;
+
+/* structure to store configs related to pll configs */
+struct pll_config {
+	struct tapll_info tapll_info_g;
+	struct pll960_info pll960_info_g;
+	struct afepll_info afepll_info_g;
+} __packed;
+
+/* structure to store configs related to UMAC clk programming */
+struct switch_clk {
+	__le16 switch_clk_info;
+	/* If switch_bbp_lmac_clk_reg is set then this value will be programmed
+	 * into reg
+	 */
+	__le16 bbp_lmac_clk_reg_val;
+	/* if switch_umac_clk is set then this value will be programmed */
+	__le16 umac_clock_reg_config;
+	/* if switch_qspi_clk is set then this value will be programmed */
+	__le16 qspi_uart_clock_reg_config;
+} __packed;
+
+struct device_clk_info {
+	struct pll_config pll_config_g;
+	struct switch_clk switch_clk_g;
+} __packed;
+
+struct bootup_params {
+	__le16 magic_number;
+	__le16 crystal_good_time;
+	__le32 valid;
+	__le32 reserved_for_valids;
+	__le16 bootup_mode_info;
+	/* configuration used for digital loop back */
+	__le16 digital_loop_back_params;
+	__le16 rtls_timestamp_en;
+	__le16 host_spi_intr_cfg;
+	struct device_clk_info device_clk_info[3];
+	/* ulp buckboost wait time  */
+	__le32 buckboost_wakeup_cnt;
+	/* pmu wakeup wait time & WDT EN info */
+	__le16 pmu_wakeup_wait;
+	u8 shutdown_wait_time;
+	/* Sleep clock source selection */
+	u8 pmu_slp_clkout_sel;
+	/* WDT programming values */
+	__le32 wdt_prog_value;
+	/* WDT soc reset delay */
+	__le32 wdt_soc_rst_delay;
+	/* dcdc modes configs */
+	__le32 dcdc_operation_mode;
+	__le32 soc_reset_wait_cnt;
+} __packed;
+#endif
diff --git a/drivers/net/wireless/rsi/rsi_common.h b/drivers/net/wireless/rsi/rsi_common.h
new file mode 100644
index 000000000000..f2f70784d4ad
--- /dev/null
+++ b/drivers/net/wireless/rsi/rsi_common.h
@@ -0,0 +1,87 @@
+/**
+ * Copyright (c) 2014 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef __RSI_COMMON_H__
+#define __RSI_COMMON_H__
+
+#include <linux/kthread.h>
+
+#define EVENT_WAIT_FOREVER              0
+#define TA_LOAD_ADDRESS                 0x00
+#define FIRMWARE_RSI9113                "rsi_91x.fw"
+#define QUEUE_NOT_FULL                  1
+#define QUEUE_FULL                      0
+
+static inline int rsi_init_event(struct rsi_event *pevent)
+{
+	atomic_set(&pevent->event_condition, 1);
+	init_waitqueue_head(&pevent->event_queue);
+	return 0;
+}
+
+static inline int rsi_wait_event(struct rsi_event *event, u32 timeout)
+{
+	int status = 0;
+
+	if (!timeout)
+		status = wait_event_interruptible(event->event_queue,
+				(atomic_read(&event->event_condition) == 0));
+	else
+		status = wait_event_interruptible_timeout(event->event_queue,
+				(atomic_read(&event->event_condition) == 0),
+				timeout);
+	return status;
+}
+
+static inline void rsi_set_event(struct rsi_event *event)
+{
+	atomic_set(&event->event_condition, 0);
+	wake_up_interruptible(&event->event_queue);
+}
+
+static inline void rsi_reset_event(struct rsi_event *event)
+{
+	atomic_set(&event->event_condition, 1);
+}
+
+static inline int rsi_create_kthread(struct rsi_common *common,
+				     struct rsi_thread *thread,
+				     void *func_ptr,
+				     u8 *name)
+{
+	init_completion(&thread->completion);
+	thread->task = kthread_run(func_ptr, common, name);
+	if (IS_ERR(thread->task))
+		return (int)PTR_ERR(thread->task);
+
+	return 0;
+}
+
+static inline int rsi_kill_thread(struct rsi_thread *handle)
+{
+	atomic_inc(&handle->thread_done);
+	rsi_set_event(&handle->event);
+
+	wait_for_completion(&handle->completion);
+	return kthread_stop(handle->task);
+}
+
+void rsi_mac80211_detach(struct rsi_hw *hw);
+u16 rsi_get_connected_channel(struct rsi_hw *adapter);
+struct rsi_hw *rsi_91x_init(void);
+void rsi_91x_deinit(struct rsi_hw *adapter);
+int rsi_read_pkt(struct rsi_common *common, s32 rcv_pkt_len);
+#endif
diff --git a/drivers/net/wireless/rsi/rsi_debugfs.h b/drivers/net/wireless/rsi/rsi_debugfs.h
new file mode 100644
index 000000000000..580ad3b3f710
--- /dev/null
+++ b/drivers/net/wireless/rsi/rsi_debugfs.h
@@ -0,0 +1,48 @@
+/**
+ * Copyright (c) 2014 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef __RSI_DEBUGFS_H__
+#define __RSI_DEBUGFS_H__
+
+#include "rsi_main.h"
+#include <linux/debugfs.h>
+
+#ifndef CONFIG_RSI_DEBUGFS
+static inline int rsi_init_dbgfs(struct rsi_hw *adapter)
+{
+	return 0;
+}
+
+static inline void rsi_remove_dbgfs(struct rsi_hw *adapter)
+{
+	return;
+}
+#else
+struct rsi_dbg_files {
+	const char *name;
+	umode_t perms;
+	const struct file_operations fops;
+};
+
+struct rsi_debugfs {
+	struct dentry *subdir;
+	struct rsi_dbg_ops *dfs_get_ops;
+	struct dentry *rsi_files[MAX_DEBUGFS_ENTRIES];
+};
+int rsi_init_dbgfs(struct rsi_hw *adapter);
+void rsi_remove_dbgfs(struct rsi_hw *adapter);
+#endif
+#endif
diff --git a/drivers/net/wireless/rsi/rsi_main.h b/drivers/net/wireless/rsi/rsi_main.h
new file mode 100644
index 000000000000..bebdc2ae6c5b
--- /dev/null
+++ b/drivers/net/wireless/rsi/rsi_main.h
@@ -0,0 +1,232 @@
+/**
+ * Copyright (c) 2014 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef __RSI_MAIN_H__
+#define __RSI_MAIN_H__
+
+#include <linux/string.h>
+#include <linux/skbuff.h>
+#include <net/mac80211.h>
+
+#define ERR_ZONE                        BIT(0)  /* For Error Msgs             */
+#define INFO_ZONE                       BIT(1)  /* For General Status Msgs    */
+#define INIT_ZONE                       BIT(2)  /* For Driver Init Seq Msgs   */
+#define MGMT_TX_ZONE                    BIT(3)  /* For TX Mgmt Path Msgs      */
+#define MGMT_RX_ZONE                    BIT(4)  /* For RX Mgmt Path Msgs      */
+#define DATA_TX_ZONE                    BIT(5)  /* For TX Data Path Msgs      */
+#define DATA_RX_ZONE                    BIT(6)  /* For RX Data Path Msgs      */
+#define FSM_ZONE                        BIT(7)  /* For State Machine Msgs     */
+#define ISR_ZONE                        BIT(8)  /* For Interrupt Msgs         */
+
+#define FSM_CARD_NOT_READY              0
+#define FSM_BOOT_PARAMS_SENT            1
+#define FSM_EEPROM_READ_MAC_ADDR        2
+#define FSM_RESET_MAC_SENT              3
+#define FSM_RADIO_CAPS_SENT             4
+#define FSM_BB_RF_PROG_SENT             5
+#define FSM_MAC_INIT_DONE               6
+
+extern u32 rsi_zone_enabled;
+
+static inline void rsi_dbg(u32 zone, const char *fmt, ...)
+{
+	struct va_format vaf;
+	va_list args;
+
+	va_start(args, fmt);
+
+	vaf.fmt = fmt;
+	vaf.va = &args;
+
+	if (zone & rsi_zone_enabled)
+		pr_info("%pV", &vaf);
+	va_end(args);
+}
+
+#define RSI_MAX_VIFS                    1
+#define NUM_EDCA_QUEUES                 4
+#define IEEE80211_ADDR_LEN              6
+#define FRAME_DESC_SZ                   16
+#define MIN_802_11_HDR_LEN              24
+
+#define DATA_QUEUE_WATER_MARK           400
+#define MIN_DATA_QUEUE_WATER_MARK       300
+#define MULTICAST_WATER_MARK            200
+#define MAC_80211_HDR_FRAME_CONTROL     0
+#define WME_NUM_AC                      4
+#define NUM_SOFT_QUEUES                 5
+#define MAX_HW_QUEUES                   8
+#define INVALID_QUEUE                   0xff
+#define MAX_CONTINUOUS_VO_PKTS          8
+#define MAX_CONTINUOUS_VI_PKTS          4
+
+/* Queue information */
+#define RSI_WIFI_MGMT_Q                 0x4
+#define RSI_WIFI_DATA_Q                 0x5
+#define IEEE80211_MGMT_FRAME            0x00
+#define IEEE80211_CTL_FRAME             0x04
+
+#define IEEE80211_QOS_TID               0x0f
+#define IEEE80211_NONQOS_TID            16
+
+#define MAX_DEBUGFS_ENTRIES             4
+
+#define TID_TO_WME_AC(_tid) (      \
+	((_tid) == 0 || (_tid) == 3) ? BE_Q : \
+	((_tid) < 3) ? BK_Q : \
+	((_tid) < 6) ? VI_Q : \
+	VO_Q)
+
+#define WME_AC(_q) (    \
+	((_q) == BK_Q) ? IEEE80211_AC_BK : \
+	((_q) == BE_Q) ? IEEE80211_AC_BE : \
+	((_q) == VI_Q) ? IEEE80211_AC_VI : \
+	IEEE80211_AC_VO)
+
+struct version_info {
+	u16 major;
+	u16 minor;
+	u16 release_num;
+	u16 patch_num;
+} __packed;
+
+struct skb_info {
+	s8 rssi;
+	u32 flags;
+	u16 channel;
+	s8 tid;
+	s8 sta_id;
+};
+
+enum edca_queue {
+	BK_Q,
+	BE_Q,
+	VI_Q,
+	VO_Q,
+	MGMT_SOFT_Q
+};
+
+struct security_info {
+	bool security_enable;
+	u32 ptk_cipher;
+	u32 gtk_cipher;
+};
+
+struct wmm_qinfo {
+	s32 weight;
+	s32 wme_params;
+	s32 pkt_contended;
+};
+
+struct transmit_q_stats {
+	u32 total_tx_pkt_send[NUM_EDCA_QUEUES + 1];
+	u32 total_tx_pkt_freed[NUM_EDCA_QUEUES + 1];
+};
+
+struct vif_priv {
+	bool is_ht;
+	bool sgi;
+	u16 seq_start;
+};
+
+struct rsi_event {
+	atomic_t event_condition;
+	wait_queue_head_t event_queue;
+};
+
+struct rsi_thread {
+	void (*thread_function)(void *);
+	struct completion completion;
+	struct task_struct *task;
+	struct rsi_event event;
+	atomic_t thread_done;
+};
+
+struct rsi_hw;
+
+struct rsi_common {
+	struct rsi_hw *priv;
+	struct vif_priv vif_info[RSI_MAX_VIFS];
+
+	bool mgmt_q_block;
+	struct version_info driver_ver;
+	struct version_info fw_ver;
+
+	struct rsi_thread tx_thread;
+	struct sk_buff_head tx_queue[NUM_EDCA_QUEUES + 1];
+	/* Mutex declaration */
+	struct mutex mutex;
+	/* Mutex used between tx/rx threads */
+	struct mutex tx_rxlock;
+	u8 endpoint;
+
+	/* Channel/band related */
+	u8 band;
+	u8 channel_width;
+
+	u16 rts_threshold;
+	u16 bitrate_mask[2];
+	u32 fixedrate_mask[2];
+
+	u8 rf_reset;
+	struct transmit_q_stats tx_stats;
+	struct security_info secinfo;
+	struct wmm_qinfo tx_qinfo[NUM_EDCA_QUEUES];
+	struct ieee80211_tx_queue_params edca_params[NUM_EDCA_QUEUES];
+	u8 mac_addr[IEEE80211_ADDR_LEN];
+
+	/* state related */
+	u32 fsm_state;
+	bool init_done;
+	u8 bb_rf_prog_count;
+	bool iface_down;
+
+	/* Generic */
+	u8 channel;
+	u8 *rx_data_pkt;
+	u8 mac_id;
+	u8 radio_id;
+	u16 rate_pwr[20];
+	u16 min_rate;
+
+	/* WMM algo related */
+	u8 selected_qnum;
+	u32 pkt_cnt;
+	u8 min_weight;
+};
+
+struct rsi_hw {
+	struct rsi_common *priv;
+	struct ieee80211_hw *hw;
+	struct ieee80211_vif *vifs[RSI_MAX_VIFS];
+	struct ieee80211_tx_queue_params edca_params[NUM_EDCA_QUEUES];
+	struct ieee80211_supported_band sbands[IEEE80211_NUM_BANDS];
+
+	struct device *device;
+	u8 sc_nvifs;
+
+#ifdef CONFIG_RSI_DEBUGFS
+	struct rsi_debugfs *dfsentry;
+	u8 num_debugfs_entries;
+#endif
+	void *rsi_dev;
+	int (*host_intf_read_pkt)(struct rsi_hw *adapter, u8 *pkt, u32 len);
+	int (*host_intf_write_pkt)(struct rsi_hw *adapter, u8 *pkt, u32 len);
+	int (*check_hw_queue_status)(struct rsi_hw *adapter, u8 q_num);
+	int (*rx_urb_submit)(struct rsi_hw *adapter);
+	int (*determine_event_timeout)(struct rsi_hw *adapter);
+};
+#endif
diff --git a/drivers/net/wireless/rsi/rsi_mgmt.h b/drivers/net/wireless/rsi/rsi_mgmt.h
new file mode 100644
index 000000000000..ac67c4ad63c2
--- /dev/null
+++ b/drivers/net/wireless/rsi/rsi_mgmt.h
@@ -0,0 +1,285 @@
+/**
+ * Copyright (c) 2014 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef __RSI_MGMT_H__
+#define __RSI_MGMT_H__
+
+#include <linux/sort.h>
+#include "rsi_boot_params.h"
+#include "rsi_main.h"
+
+#define MAX_MGMT_PKT_SIZE               512
+#define RSI_NEEDED_HEADROOM             80
+#define RSI_RCV_BUFFER_LEN              2000
+
+#define RSI_11B_MODE                    0
+#define RSI_11G_MODE                    BIT(7)
+#define RETRY_COUNT                     8
+#define RETRY_LONG                      4
+#define RETRY_SHORT                     7
+#define WMM_SHORT_SLOT_TIME             9
+#define SIFS_DURATION                   16
+
+#define KEY_TYPE_CLEAR                  0
+#define RSI_PAIRWISE_KEY                1
+#define RSI_GROUP_KEY                   2
+
+/* EPPROM_READ_ADDRESS */
+#define WLAN_MAC_EEPROM_ADDR            40
+#define WLAN_MAC_MAGIC_WORD_LEN         0x01
+#define WLAN_HOST_MODE_LEN              0x04
+#define WLAN_FW_VERSION_LEN             0x08
+#define MAGIC_WORD                      0x5A
+
+/* Receive Frame Types */
+#define TA_CONFIRM_TYPE                 0x01
+#define RX_DOT11_MGMT                   0x02
+#define TX_STATUS_IND                   0x04
+#define PROBEREQ_CONFIRM                2
+#define CARD_READY_IND                  0x00
+
+#define RSI_DELETE_PEER                 0x0
+#define RSI_ADD_PEER                    0x1
+#define START_AMPDU_AGGR                0x1
+#define STOP_AMPDU_AGGR                 0x0
+#define INTERNAL_MGMT_PKT               0x99
+
+#define PUT_BBP_RESET                   0
+#define BBP_REG_WRITE                   0
+#define RF_RESET_ENABLE                 BIT(3)
+#define RATE_INFO_ENABLE                BIT(0)
+#define RSI_BROADCAST_PKT               BIT(9)
+
+#define UPPER_20_ENABLE                 (0x2 << 12)
+#define LOWER_20_ENABLE                 (0x4 << 12)
+#define FULL40M_ENABLE                  0x6
+
+#define RSI_LMAC_CLOCK_80MHZ            0x1
+#define RSI_ENABLE_40MHZ                (0x1 << 3)
+
+#define RX_BA_INDICATION                1
+#define RSI_TBL_SZ                      40
+#define MAX_RETRIES                     8
+
+#define STD_RATE_MCS7                   0x07
+#define STD_RATE_MCS6                   0x06
+#define STD_RATE_MCS5                   0x05
+#define STD_RATE_MCS4                   0x04
+#define STD_RATE_MCS3                   0x03
+#define STD_RATE_MCS2                   0x02
+#define STD_RATE_MCS1                   0x01
+#define STD_RATE_MCS0                   0x00
+#define STD_RATE_54                     0x6c
+#define STD_RATE_48                     0x60
+#define STD_RATE_36                     0x48
+#define STD_RATE_24                     0x30
+#define STD_RATE_18                     0x24
+#define STD_RATE_12                     0x18
+#define STD_RATE_11                     0x16
+#define STD_RATE_09                     0x12
+#define STD_RATE_06                     0x0C
+#define STD_RATE_5_5                    0x0B
+#define STD_RATE_02                     0x04
+#define STD_RATE_01                     0x02
+
+#define RSI_RF_TYPE                     1
+#define RSI_RATE_00                     0x00
+#define RSI_RATE_1                      0x0
+#define RSI_RATE_2                      0x2
+#define RSI_RATE_5_5                    0x4
+#define RSI_RATE_11                     0x6
+#define RSI_RATE_6                      0x8b
+#define RSI_RATE_9                      0x8f
+#define RSI_RATE_12                     0x8a
+#define RSI_RATE_18                     0x8e
+#define RSI_RATE_24                     0x89
+#define RSI_RATE_36                     0x8d
+#define RSI_RATE_48                     0x88
+#define RSI_RATE_54                     0x8c
+#define RSI_RATE_MCS0                   0x100
+#define RSI_RATE_MCS1                   0x101
+#define RSI_RATE_MCS2                   0x102
+#define RSI_RATE_MCS3                   0x103
+#define RSI_RATE_MCS4                   0x104
+#define RSI_RATE_MCS5                   0x105
+#define RSI_RATE_MCS6                   0x106
+#define RSI_RATE_MCS7                   0x107
+#define RSI_RATE_MCS7_SG                0x307
+
+#define BW_20MHZ                        0
+#define BW_40MHZ                        1
+
+#define RSI_SUPP_FILTERS	(FIF_ALLMULTI | FIF_PROBE_REQ |\
+				 FIF_BCN_PRBRESP_PROMISC)
+enum opmode {
+	STA_OPMODE = 1,
+	AP_OPMODE = 2
+};
+
+extern struct ieee80211_rate rsi_rates[12];
+extern const u16 rsi_mcsrates[8];
+
+enum sta_notify_events {
+	STA_CONNECTED = 0,
+	STA_DISCONNECTED,
+	STA_TX_ADDBA_DONE,
+	STA_TX_DELBA,
+	STA_RX_ADDBA_DONE,
+	STA_RX_DELBA
+};
+
+/* Send Frames Types */
+enum cmd_frame_type {
+	TX_DOT11_MGMT,
+	RESET_MAC_REQ,
+	RADIO_CAPABILITIES,
+	BB_PROG_VALUES_REQUEST,
+	RF_PROG_VALUES_REQUEST,
+	WAKEUP_SLEEP_REQUEST,
+	SCAN_REQUEST,
+	TSF_UPDATE,
+	PEER_NOTIFY,
+	BLOCK_UNBLOCK,
+	SET_KEY_REQ,
+	AUTO_RATE_IND,
+	BOOTUP_PARAMS_REQUEST,
+	VAP_CAPABILITIES,
+	EEPROM_READ_TYPE ,
+	EEPROM_WRITE,
+	GPIO_PIN_CONFIG ,
+	SET_RX_FILTER,
+	AMPDU_IND,
+	STATS_REQUEST_FRAME,
+	BB_BUF_PROG_VALUES_REQ,
+	BBP_PROG_IN_TA,
+	BG_SCAN_PARAMS,
+	BG_SCAN_PROBE_REQ,
+	CW_MODE_REQ,
+	PER_CMD_PKT
+};
+
+struct rsi_mac_frame {
+	__le16 desc_word[8];
+} __packed;
+
+struct rsi_boot_params {
+	__le16 desc_word[8];
+	struct bootup_params bootup_params;
+} __packed;
+
+struct rsi_peer_notify {
+	__le16 desc_word[8];
+	u8 mac_addr[6];
+	__le16 command;
+	__le16 mpdu_density;
+	__le16 reserved;
+	__le32 sta_flags;
+} __packed;
+
+struct rsi_vap_caps {
+	__le16 desc_word[8];
+	u8 mac_addr[6];
+	__le16 keep_alive_period;
+	u8 bssid[6];
+	__le16 reserved;
+	__le32 flags;
+	__le16 frag_threshold;
+	__le16 rts_threshold;
+	__le32 default_mgmt_rate;
+	__le32 default_ctrl_rate;
+	__le32 default_data_rate;
+	__le16 beacon_interval;
+	__le16 dtim_period;
+} __packed;
+
+struct rsi_set_key {
+	__le16 desc_word[8];
+	u8 key[4][32];
+	u8 tx_mic_key[8];
+	u8 rx_mic_key[8];
+} __packed;
+
+struct rsi_auto_rate {
+	__le16 desc_word[8];
+	__le16 failure_limit;
+	__le16 initial_boundary;
+	__le16 max_threshold_limt;
+	__le16 num_supported_rates;
+	__le16 aarf_rssi;
+	__le16 moderate_rate_inx;
+	__le16 collision_tolerance;
+	__le16 supported_rates[40];
+} __packed;
+
+struct qos_params {
+	__le16 cont_win_min_q;
+	__le16 cont_win_max_q;
+	__le16 aifsn_val_q;
+	__le16 txop_q;
+} __packed;
+
+struct rsi_radio_caps {
+	__le16 desc_word[8];
+	struct qos_params qos_params[MAX_HW_QUEUES];
+	u8 num_11n_rates;
+	u8 num_11ac_rates;
+	__le16 gcpd_per_rate[20];
+} __packed;
+
+static inline u32 rsi_get_queueno(u8 *addr, u16 offset)
+{
+	return (le16_to_cpu(*(__le16 *)&addr[offset]) & 0x7000) >> 12;
+}
+
+static inline u32 rsi_get_length(u8 *addr, u16 offset)
+{
+	return (le16_to_cpu(*(__le16 *)&addr[offset])) & 0x0fff;
+}
+
+static inline u8 rsi_get_extended_desc(u8 *addr, u16 offset)
+{
+	return le16_to_cpu(*((__le16 *)&addr[offset + 4])) & 0x00ff;
+}
+
+static inline u8 rsi_get_rssi(u8 *addr)
+{
+	return *(u8 *)(addr + FRAME_DESC_SZ);
+}
+
+static inline u8 rsi_get_channel(u8 *addr)
+{
+	return *(char *)(addr + 15);
+}
+
+int rsi_mgmt_pkt_recv(struct rsi_common *common, u8 *msg);
+int rsi_set_vap_capabilities(struct rsi_common *common, enum opmode mode);
+int rsi_send_aggregation_params_frame(struct rsi_common *common, u16 tid,
+				      u16 ssn, u8 buf_size, u8 event);
+int rsi_hal_load_key(struct rsi_common *common, u8 *data, u16 key_len,
+		     u8 key_type, u8 key_id, u32 cipher);
+int rsi_set_channel(struct rsi_common *common, u16 chno);
+void rsi_inform_bss_status(struct rsi_common *common, u8 status,
+			   const u8 *bssid, u8 qos_enable, u16 aid);
+void rsi_indicate_pkt_to_os(struct rsi_common *common, struct sk_buff *skb);
+int rsi_mac80211_attach(struct rsi_common *common);
+void rsi_indicate_tx_status(struct rsi_hw *common, struct sk_buff *skb,
+			    int status);
+bool rsi_is_cipher_wep(struct rsi_common *common);
+void rsi_core_qos_processor(struct rsi_common *common);
+void rsi_core_xmit(struct rsi_common *common, struct sk_buff *skb);
+int rsi_send_mgmt_pkt(struct rsi_common *common, struct sk_buff *skb);
+int rsi_send_data_pkt(struct rsi_common *common, struct sk_buff *skb);
+#endif
diff --git a/drivers/net/wireless/rsi/rsi_sdio.h b/drivers/net/wireless/rsi/rsi_sdio.h
new file mode 100644
index 000000000000..df4b5e20e05f
--- /dev/null
+++ b/drivers/net/wireless/rsi/rsi_sdio.h
@@ -0,0 +1,129 @@
+/**
+ * @section LICENSE
+ * Copyright (c) 2014 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#ifndef __RSI_SDIO_INTF__
+#define __RSI_SDIO_INTF__
+
+#include <linux/mmc/card.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sdio_func.h>
+#include <linux/mmc/sdio.h>
+#include <linux/mmc/sd.h>
+#include <linux/mmc/sdio_ids.h>
+#include "rsi_main.h"
+
+enum sdio_interrupt_type {
+	BUFFER_FULL         = 0x0,
+	BUFFER_AVAILABLE    = 0x1,
+	FIRMWARE_ASSERT_IND = 0x3,
+	MSDU_PACKET_PENDING = 0x4,
+	UNKNOWN_INT         = 0XE
+};
+
+/* Buffer status register related info */
+#define PKT_BUFF_SEMI_FULL                      0
+#define PKT_BUFF_FULL                           1
+#define PKT_MGMT_BUFF_FULL                      2
+#define MSDU_PKT_PENDING                        3
+/* Interrupt Bit Related Macros */
+#define PKT_BUFF_AVAILABLE                      0
+#define FW_ASSERT_IND                           2
+
+#define RSI_DEVICE_BUFFER_STATUS_REGISTER       0xf3
+#define RSI_FN1_INT_REGISTER                    0xf9
+#define RSI_SD_REQUEST_MASTER                   0x10000
+
+/* FOR SD CARD ONLY */
+#define SDIO_RX_NUM_BLOCKS_REG                  0x000F1
+#define SDIO_FW_STATUS_REG                      0x000F2
+#define SDIO_NXT_RD_DELAY2                      0x000F5
+#define SDIO_MASTER_ACCESS_MSBYTE               0x000FA
+#define SDIO_MASTER_ACCESS_LSBYTE               0x000FB
+#define SDIO_READ_START_LVL                     0x000FC
+#define SDIO_READ_FIFO_CTL                      0x000FD
+#define SDIO_WRITE_FIFO_CTL                     0x000FE
+#define SDIO_FUN1_INTR_CLR_REG                  0x0008
+#define SDIO_REG_HIGH_SPEED                     0x0013
+
+#define RSI_GET_SDIO_INTERRUPT_TYPE(_I, TYPE)      \
+	{					   \
+		TYPE =                             \
+		(_I & (1 << PKT_BUFF_AVAILABLE)) ? \
+		BUFFER_AVAILABLE :		   \
+		(_I & (1 << MSDU_PKT_PENDING)) ?   \
+		MSDU_PACKET_PENDING :              \
+		(_I & (1 << FW_ASSERT_IND)) ?      \
+		FIRMWARE_ASSERT_IND : UNKNOWN_INT; \
+	}
+
+/* common registers in SDIO function1 */
+#define TA_SOFT_RESET_REG            0x0004
+#define TA_TH0_PC_REG                0x0400
+#define TA_HOLD_THREAD_REG           0x0844
+#define TA_RELEASE_THREAD_REG        0x0848
+
+#define TA_SOFT_RST_CLR              0
+#define TA_SOFT_RST_SET              BIT(0)
+#define TA_PC_ZERO                   0
+#define TA_HOLD_THREAD_VALUE         cpu_to_le32(0xF)
+#define TA_RELEASE_THREAD_VALUE      cpu_to_le32(0xF)
+#define TA_BASE_ADDR                 0x2200
+#define MISC_CFG_BASE_ADDR           0x4150
+
+struct receive_info {
+	bool buffer_full;
+	bool semi_buffer_full;
+	bool mgmt_buffer_full;
+	u32 mgmt_buf_full_counter;
+	u32 buf_semi_full_counter;
+	u8 watch_bufferfull_count;
+	u32 sdio_intr_status_zero;
+	u32 sdio_int_counter;
+	u32 total_sdio_msdu_pending_intr;
+	u32 total_sdio_unknown_intr;
+	u32 buf_full_counter;
+	u32 buf_avilable_counter;
+};
+
+struct rsi_91x_sdiodev {
+	struct sdio_func *pfunction;
+	struct task_struct *in_sdio_litefi_irq;
+	struct receive_info rx_info;
+	u32 next_read_delay;
+	u32 sdio_high_speed_enable;
+	u8 sdio_clock_speed;
+	u32 cardcapability;
+	u8 prev_desc[16];
+	u32 tx_blk_size;
+	u8 write_fail;
+};
+
+void rsi_interrupt_handler(struct rsi_hw *adapter);
+int rsi_init_sdio_slave_regs(struct rsi_hw *adapter);
+int rsi_sdio_device_init(struct rsi_common *common);
+int rsi_sdio_read_register(struct rsi_hw *adapter, u32 addr, u8 *data);
+int rsi_sdio_host_intf_read_pkt(struct rsi_hw *adapter, u8 *pkt, u32 length);
+int rsi_sdio_write_register(struct rsi_hw *adapter, u8 function,
+			    u32 addr, u8 *data);
+int rsi_sdio_write_register_multiple(struct rsi_hw *adapter, u32 addr,
+				     u8 *data, u32 count);
+void rsi_sdio_ack_intr(struct rsi_hw *adapter, u8 int_bit);
+int rsi_sdio_determine_event_timeout(struct rsi_hw *adapter);
+int rsi_sdio_read_buffer_status_register(struct rsi_hw *adapter, u8 q_num);
+#endif
diff --git a/drivers/net/wireless/rsi/rsi_usb.h b/drivers/net/wireless/rsi/rsi_usb.h
new file mode 100644
index 000000000000..ebea0c411ead
--- /dev/null
+++ b/drivers/net/wireless/rsi/rsi_usb.h
@@ -0,0 +1,68 @@
+/**
+ * @section LICENSE
+ * Copyright (c) 2014 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef __RSI_USB_INTF__
+#define __RSI_USB_INTF__
+
+#include <linux/usb.h>
+#include "rsi_main.h"
+#include "rsi_common.h"
+
+#define USB_INTERNAL_REG_1           0x25000
+#define RSI_USB_READY_MAGIC_NUM      0xab
+#define FW_STATUS_REG                0x41050012
+
+#define USB_VENDOR_REGISTER_READ     0x15
+#define USB_VENDOR_REGISTER_WRITE    0x16
+#define RSI_USB_TX_HEAD_ROOM         128
+
+#define MAX_RX_URBS                  1
+#define MAX_BULK_EP                  8
+#define MGMT_EP                      1
+#define DATA_EP                      2
+
+struct rsi_91x_usbdev {
+	struct rsi_thread rx_thread;
+	u8 endpoint;
+	struct usb_device *usbdev;
+	struct usb_interface *pfunction;
+	struct urb *rx_usb_urb[MAX_RX_URBS];
+	u8 *tx_buffer;
+	__le16 bulkin_size;
+	u8 bulkin_endpoint_addr;
+	__le16 bulkout_size[MAX_BULK_EP];
+	u8 bulkout_endpoint_addr[MAX_BULK_EP];
+	u32 tx_blk_size;
+	u8 write_fail;
+};
+
+static inline int rsi_usb_check_queue_status(struct rsi_hw *adapter, u8 q_num)
+{
+	/* In USB, there isn't any need to check the queue status */
+	return QUEUE_NOT_FULL;
+}
+
+static inline int rsi_usb_event_timeout(struct rsi_hw *adapter)
+{
+	return EVENT_WAIT_FOREVER;
+}
+
+int rsi_usb_device_init(struct rsi_common *common);
+int rsi_usb_write_register_multiple(struct rsi_hw *adapter, u32 addr,
+				    u8 *data, u32 count);
+void rsi_usb_rx_thread(struct rsi_common *common);
+#endif
-- 
cgit v1.2.2


From 9c62a68d13119a1ca9718381d97b0cb415ff4e9d Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Fri, 14 Mar 2014 20:51:52 -0700
Subject: netpoll: Remove dead packet receive code (CONFIG_NETPOLL_TRAP)

The netpoll packet receive code only becomes active if the netpoll
rx_skb_hook is implemented, and there is not a single implementation
of the netpoll rx_skb_hook in the kernel.

All of the out of tree implementations I have found all call
netpoll_poll which was removed from the kernel in 2011, so this
change should not add any additional breakage.

There are problems with the netpoll packet receive code.  __netpoll_rx
does not call dev_kfree_skb_irq or dev_kfree_skb_any in hard irq
context.  netpoll_neigh_reply leaks every skb it receives.  Reception
of packets does not work successfully on stacked devices (aka bonding,
team, bridge, and vlans).

Given that the netpoll packet receive code is buggy, there are no
out of tree users that will be merged soon, and the code has
not been used for in tree for a decade let's just remove it.

Reverting this commit can server as a starting point for anyone
who wants to resurrect netpoll packet reception support.

Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/Kconfig | 5 -----
 1 file changed, 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 494b888a6568..89402c3b64f8 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -177,11 +177,6 @@ config NETCONSOLE_DYNAMIC
 config NETPOLL
 	def_bool NETCONSOLE
 
-config NETPOLL_TRAP
-	bool "Netpoll traffic trapping"
-	default n
-	depends on NETPOLL
-
 config NET_POLL_CONTROLLER
 	def_bool NETPOLL
 
-- 
cgit v1.2.2


From 264be2f5a973cc85be3e31d6bf6234b55a256627 Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Date: Sat, 15 Mar 2014 03:11:24 +0300
Subject: sh_eth: exit probe with unknown register layout

Exit the driver's probe() method when the register layout is unknown as the
driver would cause kernel oops in this case anyway.

While at it, move the corresponding error message printout and convert it from
pr_err() to dev_err().

Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/renesas/sh_eth.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index 236a4414173a..8d8315bb0cea 100644
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -2703,7 +2703,6 @@ static const u16 *sh_eth_get_register_offset(int register_type)
 		reg_offset = sh_eth_offset_fast_sh3_sh2;
 		break;
 	default:
-		pr_err("Unknown register type (%d)\n", register_type);
 		break;
 	}
 
@@ -2859,6 +2858,12 @@ static int sh_eth_drv_probe(struct platform_device *pdev)
 		mdp->cd = (struct sh_eth_cpu_data *)match->data;
 	}
 	mdp->reg_offset = sh_eth_get_register_offset(mdp->cd->register_type);
+	if (!mdp->reg_offset) {
+		dev_err(&pdev->dev, "Unknown register type (%d)\n",
+			mdp->cd->register_type);
+		ret = -EINVAL;
+		goto out_release;
+	}
 	sh_eth_set_default_cpu_data(mdp->cd);
 
 	/* set function */
-- 
cgit v1.2.2


From f75f14ec2f7b552dc87b4b57b2a19e487378f774 Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Date: Sat, 15 Mar 2014 03:27:54 +0300
Subject: sh_eth: convert pr_*() to netdev_*() calls

Convert pr_*() to netdev_*() calls as the latter provide info on a device.

Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/renesas/sh_eth.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index 8d8315bb0cea..62f79fedd36f 100644
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -400,7 +400,8 @@ static void sh_eth_select_mii(struct net_device *ndev)
 		value = 0x0;
 		break;
 	default:
-		pr_warn("PHY interface mode was not setup. Set to MII.\n");
+		netdev_warn(ndev,
+			    "PHY interface mode was not setup. Set to MII.\n");
 		value = 0x1;
 		break;
 	}
@@ -854,7 +855,7 @@ static int sh_eth_check_reset(struct net_device *ndev)
 		cnt--;
 	}
 	if (cnt <= 0) {
-		pr_err("Device reset failed\n");
+		netdev_err(ndev, "Device reset failed\n");
 		ret = -ETIMEDOUT;
 	}
 	return ret;
@@ -2924,8 +2925,8 @@ static int sh_eth_drv_probe(struct platform_device *pdev)
 	}
 
 	/* print device information */
-	pr_info("Base address at 0x%x, %pM, IRQ %d.\n",
-		(u32)ndev->base_addr, ndev->dev_addr, ndev->irq);
+	netdev_info(ndev, "Base address at 0x%x, %pM, IRQ %d.\n",
+		    (u32)ndev->base_addr, ndev->dev_addr, ndev->irq);
 
 	platform_set_drvdata(pdev, ndev);
 
-- 
cgit v1.2.2


From da2468555643efbde3fb026cd46e5245800cc872 Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Date: Sat, 15 Mar 2014 03:29:14 +0300
Subject: sh_eth: convert dev_*() to netdev_*() calls

Convert dev_*(&ndev->dev, ...) to netdev_*(ndev, ...) calls since they are a bit
shorter and at the same time give more information on a device.

Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/renesas/sh_eth.c | 47 ++++++++++++++++++-----------------
 1 file changed, 24 insertions(+), 23 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index 62f79fedd36f..7ae611fcba53 100644
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -1558,7 +1558,7 @@ ignore_link:
 		if (intr_status & EESR_TABT) {	/* Transmit Abort int */
 			ndev->stats.tx_aborted_errors++;
 			if (netif_msg_tx_err(mdp))
-				dev_err(&ndev->dev, "Transmit Abort\n");
+				netdev_err(ndev, "Transmit Abort\n");
 		}
 	}
 
@@ -1568,7 +1568,7 @@ ignore_link:
 			/* Receive Frame Overflow int */
 			ndev->stats.rx_frame_errors++;
 			if (netif_msg_rx_err(mdp))
-				dev_err(&ndev->dev, "Receive Abort\n");
+				netdev_err(ndev, "Receive Abort\n");
 		}
 	}
 
@@ -1576,14 +1576,14 @@ ignore_link:
 		/* Transmit Descriptor Empty int */
 		ndev->stats.tx_fifo_errors++;
 		if (netif_msg_tx_err(mdp))
-			dev_err(&ndev->dev, "Transmit Descriptor Empty\n");
+			netdev_err(ndev, "Transmit Descriptor Empty\n");
 	}
 
 	if (intr_status & EESR_TFE) {
 		/* FIFO under flow */
 		ndev->stats.tx_fifo_errors++;
 		if (netif_msg_tx_err(mdp))
-			dev_err(&ndev->dev, "Transmit FIFO Under flow\n");
+			netdev_err(ndev, "Transmit FIFO Under flow\n");
 	}
 
 	if (intr_status & EESR_RDE) {
@@ -1591,21 +1591,21 @@ ignore_link:
 		ndev->stats.rx_over_errors++;
 
 		if (netif_msg_rx_err(mdp))
-			dev_err(&ndev->dev, "Receive Descriptor Empty\n");
+			netdev_err(ndev, "Receive Descriptor Empty\n");
 	}
 
 	if (intr_status & EESR_RFE) {
 		/* Receive FIFO Overflow int */
 		ndev->stats.rx_fifo_errors++;
 		if (netif_msg_rx_err(mdp))
-			dev_err(&ndev->dev, "Receive FIFO Overflow\n");
+			netdev_err(ndev, "Receive FIFO Overflow\n");
 	}
 
 	if (!mdp->cd->no_ade && (intr_status & EESR_ADE)) {
 		/* Address Error */
 		ndev->stats.tx_fifo_errors++;
 		if (netif_msg_tx_err(mdp))
-			dev_err(&ndev->dev, "Address Error\n");
+			netdev_err(ndev, "Address Error\n");
 	}
 
 	mask = EESR_TWB | EESR_TABT | EESR_ADE | EESR_TDE | EESR_TFE;
@@ -1616,9 +1616,9 @@ ignore_link:
 		u32 edtrr = sh_eth_read(ndev, EDTRR);
 
 		/* dmesg */
-		dev_err(&ndev->dev, "TX error. status=%8.8x cur_tx=%8.8x dirty_tx=%8.8x state=%8.8x EDTRR=%8.8x.\n",
-			intr_status, mdp->cur_tx, mdp->dirty_tx,
-			(u32)ndev->state, edtrr);
+		netdev_err(ndev, "TX error. status=%8.8x cur_tx=%8.8x dirty_tx=%8.8x state=%8.8x EDTRR=%8.8x.\n",
+			   intr_status, mdp->cur_tx, mdp->dirty_tx,
+			   (u32)ndev->state, edtrr);
 		/* dirty buffer free */
 		sh_eth_txfree(ndev);
 
@@ -1663,9 +1663,9 @@ static irqreturn_t sh_eth_interrupt(int irq, void *netdev)
 				     EESIPR);
 			__napi_schedule(&mdp->napi);
 		} else {
-			dev_warn(&ndev->dev,
-				 "ignoring interrupt, status 0x%08lx, mask 0x%08lx.\n",
-				 intr_status, intr_enable);
+			netdev_warn(ndev,
+				    "ignoring interrupt, status 0x%08lx, mask 0x%08lx.\n",
+				    intr_status, intr_enable);
 		}
 	}
 
@@ -1794,12 +1794,12 @@ static int sh_eth_phy_init(struct net_device *ndev)
 	}
 
 	if (IS_ERR(phydev)) {
-		dev_err(&ndev->dev, "failed to connect PHY\n");
+		netdev_err(ndev, "failed to connect PHY\n");
 		return PTR_ERR(phydev);
 	}
 
-	dev_info(&ndev->dev, "attached PHY %d (IRQ %d) to driver %s\n",
-		 phydev->addr, phydev->irq, phydev->drv->name);
+	netdev_info(ndev, "attached PHY %d (IRQ %d) to driver %s\n",
+		    phydev->addr, phydev->irq, phydev->drv->name);
 
 	mdp->phydev = phydev;
 
@@ -1980,12 +1980,12 @@ static int sh_eth_set_ringparam(struct net_device *ndev,
 
 	ret = sh_eth_ring_init(ndev);
 	if (ret < 0) {
-		dev_err(&ndev->dev, "%s: sh_eth_ring_init failed.\n", __func__);
+		netdev_err(ndev, "%s: sh_eth_ring_init failed.\n", __func__);
 		return ret;
 	}
 	ret = sh_eth_dev_init(ndev, false);
 	if (ret < 0) {
-		dev_err(&ndev->dev, "%s: sh_eth_dev_init failed.\n", __func__);
+		netdev_err(ndev, "%s: sh_eth_dev_init failed.\n", __func__);
 		return ret;
 	}
 
@@ -2026,7 +2026,7 @@ static int sh_eth_open(struct net_device *ndev)
 	ret = request_irq(ndev->irq, sh_eth_interrupt,
 			  mdp->cd->irq_flags, ndev->name, ndev);
 	if (ret) {
-		dev_err(&ndev->dev, "Can not assign IRQ number\n");
+		netdev_err(ndev, "Can not assign IRQ number\n");
 		goto out_napi_off;
 	}
 
@@ -2065,8 +2065,9 @@ static void sh_eth_tx_timeout(struct net_device *ndev)
 	netif_stop_queue(ndev);
 
 	if (netif_msg_timer(mdp)) {
-		dev_err(&ndev->dev, "%s: transmit timed out, status %8.8x, resetting...\n",
-			ndev->name, (int)sh_eth_read(ndev, EESR));
+		netdev_err(ndev,
+			   "transmit timed out, status %8.8x, resetting...\n",
+			   (int)sh_eth_read(ndev, EESR));
 	}
 
 	/* tx_errors count up */
@@ -2103,7 +2104,7 @@ static int sh_eth_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 	if ((mdp->cur_tx - mdp->dirty_tx) >= (mdp->num_tx_ring - 4)) {
 		if (!sh_eth_txfree(ndev)) {
 			if (netif_msg_tx_queued(mdp))
-				dev_warn(&ndev->dev, "TxFD exhausted.\n");
+				netdev_warn(ndev, "TxFD exhausted.\n");
 			netif_stop_queue(ndev);
 			spin_unlock_irqrestore(&mdp->lock, flags);
 			return NETDEV_TX_BUSY;
@@ -2273,7 +2274,7 @@ static int sh_eth_tsu_busy(struct net_device *ndev)
 		udelay(10);
 		timeout--;
 		if (timeout <= 0) {
-			dev_err(&ndev->dev, "%s: timeout\n", __func__);
+			netdev_err(ndev, "%s: timeout\n", __func__);
 			return -ETIMEDOUT;
 		}
 	}
-- 
cgit v1.2.2


From 8d5009f6a9d9f4ef62a39bf68b53379b2b766c1c Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Date: Sat, 15 Mar 2014 03:30:59 +0300
Subject: sh_eth: fold netif_msg_*() and netdev_*() calls into netif_*()
 invocations

Now that we call netdev_*() under netif_msg_*() checks, we can fold these into
netif_*() macro invocations.

Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/renesas/sh_eth.c | 33 +++++++++++----------------------
 1 file changed, 11 insertions(+), 22 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index 7ae611fcba53..efaca6d5e85b 100644
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -1557,8 +1557,7 @@ ignore_link:
 		/* Unused write back interrupt */
 		if (intr_status & EESR_TABT) {	/* Transmit Abort int */
 			ndev->stats.tx_aborted_errors++;
-			if (netif_msg_tx_err(mdp))
-				netdev_err(ndev, "Transmit Abort\n");
+			netif_err(mdp, tx_err, ndev, "Transmit Abort\n");
 		}
 	}
 
@@ -1567,45 +1566,38 @@ ignore_link:
 		if (intr_status & EESR_RFRMER) {
 			/* Receive Frame Overflow int */
 			ndev->stats.rx_frame_errors++;
-			if (netif_msg_rx_err(mdp))
-				netdev_err(ndev, "Receive Abort\n");
+			netif_err(mdp, rx_err, ndev, "Receive Abort\n");
 		}
 	}
 
 	if (intr_status & EESR_TDE) {
 		/* Transmit Descriptor Empty int */
 		ndev->stats.tx_fifo_errors++;
-		if (netif_msg_tx_err(mdp))
-			netdev_err(ndev, "Transmit Descriptor Empty\n");
+		netif_err(mdp, tx_err, ndev, "Transmit Descriptor Empty\n");
 	}
 
 	if (intr_status & EESR_TFE) {
 		/* FIFO under flow */
 		ndev->stats.tx_fifo_errors++;
-		if (netif_msg_tx_err(mdp))
-			netdev_err(ndev, "Transmit FIFO Under flow\n");
+		netif_err(mdp, tx_err, ndev, "Transmit FIFO Under flow\n");
 	}
 
 	if (intr_status & EESR_RDE) {
 		/* Receive Descriptor Empty int */
 		ndev->stats.rx_over_errors++;
-
-		if (netif_msg_rx_err(mdp))
-			netdev_err(ndev, "Receive Descriptor Empty\n");
+		netif_err(mdp, rx_err, ndev, "Receive Descriptor Empty\n");
 	}
 
 	if (intr_status & EESR_RFE) {
 		/* Receive FIFO Overflow int */
 		ndev->stats.rx_fifo_errors++;
-		if (netif_msg_rx_err(mdp))
-			netdev_err(ndev, "Receive FIFO Overflow\n");
+		netif_err(mdp, rx_err, ndev, "Receive FIFO Overflow\n");
 	}
 
 	if (!mdp->cd->no_ade && (intr_status & EESR_ADE)) {
 		/* Address Error */
 		ndev->stats.tx_fifo_errors++;
-		if (netif_msg_tx_err(mdp))
-			netdev_err(ndev, "Address Error\n");
+		netif_err(mdp, tx_err, ndev, "Address Error\n");
 	}
 
 	mask = EESR_TWB | EESR_TABT | EESR_ADE | EESR_TDE | EESR_TFE;
@@ -2064,11 +2056,9 @@ static void sh_eth_tx_timeout(struct net_device *ndev)
 
 	netif_stop_queue(ndev);
 
-	if (netif_msg_timer(mdp)) {
-		netdev_err(ndev,
-			   "transmit timed out, status %8.8x, resetting...\n",
-			   (int)sh_eth_read(ndev, EESR));
-	}
+	netif_err(mdp, timer, ndev,
+		  "transmit timed out, status %8.8x, resetting...\n",
+		  (int)sh_eth_read(ndev, EESR));
 
 	/* tx_errors count up */
 	ndev->stats.tx_errors++;
@@ -2103,8 +2093,7 @@ static int sh_eth_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 	spin_lock_irqsave(&mdp->lock, flags);
 	if ((mdp->cur_tx - mdp->dirty_tx) >= (mdp->num_tx_ring - 4)) {
 		if (!sh_eth_txfree(ndev)) {
-			if (netif_msg_tx_queued(mdp))
-				netdev_warn(ndev, "TxFD exhausted.\n");
+			netif_warn(mdp, tx_queued, ndev, "TxFD exhausted.\n");
 			netif_stop_queue(ndev);
 			spin_unlock_irqrestore(&mdp->lock, flags);
 			return NETDEV_TX_BUSY;
-- 
cgit v1.2.2


From 7332fcb82a15730f4b0bfa65db074c505c0ffc1a Mon Sep 17 00:00:00 2001
From: Alexander Aring <alex.aring@gmail.com>
Date: Sat, 15 Mar 2014 09:29:03 +0100
Subject: at86rf230: fix unexpected state change

This patch fix a unexpected state change for the at86rf231 chip.
We can't change into STATE_FORCE_TX_ON while the chip is in one of
SLEEP, P_ON, RESET, TRX_OFF, and all *_NOCLK states.

In this case we are in the TRX_OFF state. See datasheet [1] page 71 for
more information.

Without this patch you will get the following message on a at86rf231 device:

[   20.065218] unexpected state change: 8, asked for 4
[   20.070527] ------------[ cut here ]------------
[   20.075414] WARNING: CPU: 0 PID: 160 at net/mac802154/ieee802154_dev.c:43 mac802154_slave_open+0x70/0xb8()
[   20.085594] Modules linked in: autofs4
[   20.089667] CPU: 0 PID: 160 Comm: ifconfig Not tainted 3.14.0-20140108-1-00993-g905c192 #162
[   20.098612] [<c00127b8>] (unwind_backtrace) from [<c0010b1c>] (show_stack+0x10/0x14)
[   20.106819] [<c0010b1c>] (show_stack) from [<c0033838>] (warn_slowpath_common+0x60/0x80)
[   20.115311] [<c0033838>] (warn_slowpath_common) from [<c00338e8>] (warn_slowpath_null+0x18/0x20)
[   20.124590] [<c00338e8>] (warn_slowpath_null) from [<c057b7e8>] (mac802154_slave_open+0x70/0xb8)
[   20.133880] [<c057b7e8>] (mac802154_slave_open) from [<c0488a58>] (__dev_open+0xa8/0x108)
[   20.142553] [<c0488a58>] (__dev_open) from [<c0488cb0>] (__dev_change_flags+0x8c/0x148)
[   20.151051] [<c0488cb0>] (__dev_change_flags) from [<c0488d84>] (dev_change_flags+0x18/0x48)
[   20.159968] [<c0488d84>] (dev_change_flags) from [<c04e2e9c>] (devinet_ioctl+0x2b0/0x63c)
[   20.168623] [<c04e2e9c>] (devinet_ioctl) from [<c04712e4>] (sock_ioctl+0x23c/0x29c)
[   20.176727] [<c04712e4>] (sock_ioctl) from [<c00e3cb8>] (do_vfs_ioctl+0x4a8/0x578)
[   20.184671] [<c00e3cb8>] (do_vfs_ioctl) from [<c00e3dd4>] (SyS_ioctl+0x4c/0x78)
[   20.192402] [<c00e3dd4>] (SyS_ioctl) from [<c000da00>] (ret_fast_syscall+0x0/0x48)
[   20.200392] ---[ end trace 9a34542f4ea08e47 ]---

This patch was tested on at86rf231 and at86rf212.

[1] http://www.atmel.com/images/doc8111.pdf

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ieee802154/at86rf230.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index ae38a98d072e..ad296bc86e69 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -574,7 +574,7 @@ at86rf230_start(struct ieee802154_dev *dev)
 	if (rc)
 		return rc;
 
-	rc = at86rf230_state(dev, STATE_FORCE_TX_ON);
+	rc = at86rf230_state(dev, STATE_TX_ON);
 	if (rc)
 		return rc;
 
-- 
cgit v1.2.2


From 7e8146189a6c2ba9445b8d848847f2520c6cb028 Mon Sep 17 00:00:00 2001
From: Alexander Aring <alex.aring@gmail.com>
Date: Sat, 15 Mar 2014 09:29:04 +0100
Subject: at86rf230: move locking state in xmit

There is no need to lock the clearing of IRQ_TRX_END in status.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ieee802154/at86rf230.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index ad296bc86e69..030bf3995e7e 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -914,8 +914,8 @@ static void at86rf230_irqwork(struct work_struct *work)
 	status &= ~IRQ_TRX_UR; /* FIXME: possibly handle ???*/
 
 	if (status & IRQ_TRX_END) {
-		spin_lock_irqsave(&lp->lock, flags);
 		status &= ~IRQ_TRX_END;
+		spin_lock_irqsave(&lp->lock, flags);
 		if (lp->is_tx) {
 			lp->is_tx = 0;
 			spin_unlock_irqrestore(&lp->lock, flags);
-- 
cgit v1.2.2


From 56f023fbe8fff04a46b5486288eaa1dc8bfdd5b9 Mon Sep 17 00:00:00 2001
From: Alexander Aring <alex.aring@gmail.com>
Date: Sat, 15 Mar 2014 09:29:05 +0100
Subject: at86rf230: change reset timings

While checkpatch another patch I got a:

"WARNING: msleep < 20ms can sleep for up to 20ms"

The datasheet of at86rf231 and at86rf212 says a minimum delay for reset
pulse width and spi access latency after reset is 625 nanoseconds.

This patch removes the 1 milliseconds sleep and replace it with a 1
microseconds udelay which should be also okay for the reset pulse width.

To change the state from RESET -> TRX_OFF the at86rf230 device needs 120
microseconds, this is a worst case of all at86rf* chips.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ieee802154/at86rf230.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index 030bf3995e7e..37442407d948 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -1080,11 +1080,11 @@ static int at86rf230_probe(struct spi_device *spi)
 	}
 
 	/* Reset */
-	msleep(1);
+	udelay(1);
 	gpio_set_value(pdata->rstn, 0);
-	msleep(1);
+	udelay(1);
 	gpio_set_value(pdata->rstn, 1);
-	msleep(1);
+	usleep_range(120, 240);
 
 	rc = __at86rf230_detect_device(spi, &man_id, &part, &version);
 	if (rc < 0)
-- 
cgit v1.2.2


From 3fa275712489d31171b612a9a83e7b9840c6364e Mon Sep 17 00:00:00 2001
From: Alexander Aring <alex.aring@gmail.com>
Date: Sat, 15 Mar 2014 09:29:06 +0100
Subject: at86rf230: make reset pin optionally

This patch make the reset pin optionally. Some devices like the atben
from qi-hardware don't have a reset pin externally. The usually way is
to turn power off/on for the atben device to initiate a device reset.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ieee802154/at86rf230.c | 34 +++++++++++++++++++++-------------
 1 file changed, 21 insertions(+), 13 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index 37442407d948..47677e3f986f 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -1059,9 +1059,11 @@ static int at86rf230_probe(struct spi_device *spi)
 		return -EINVAL;
 	}
 
-	rc = gpio_request(pdata->rstn, "rstn");
-	if (rc)
-		return rc;
+	if (gpio_is_valid(pdata->rstn)) {
+		rc = gpio_request(pdata->rstn, "rstn");
+		if (rc)
+			return rc;
+	}
 
 	if (gpio_is_valid(pdata->slp_tr)) {
 		rc = gpio_request(pdata->slp_tr, "slp_tr");
@@ -1069,9 +1071,11 @@ static int at86rf230_probe(struct spi_device *spi)
 			goto err_slp_tr;
 	}
 
-	rc = gpio_direction_output(pdata->rstn, 1);
-	if (rc)
-		goto err_gpio_dir;
+	if (gpio_is_valid(pdata->rstn)) {
+		rc = gpio_direction_output(pdata->rstn, 1);
+		if (rc)
+			goto err_gpio_dir;
+	}
 
 	if (gpio_is_valid(pdata->slp_tr)) {
 		rc = gpio_direction_output(pdata->slp_tr, 0);
@@ -1080,11 +1084,13 @@ static int at86rf230_probe(struct spi_device *spi)
 	}
 
 	/* Reset */
-	udelay(1);
-	gpio_set_value(pdata->rstn, 0);
-	udelay(1);
-	gpio_set_value(pdata->rstn, 1);
-	usleep_range(120, 240);
+	if (gpio_is_valid(pdata->rstn)) {
+		udelay(1);
+		gpio_set_value(pdata->rstn, 0);
+		udelay(1);
+		gpio_set_value(pdata->rstn, 1);
+		usleep_range(120, 240);
+	}
 
 	rc = __at86rf230_detect_device(spi, &man_id, &part, &version);
 	if (rc < 0)
@@ -1198,7 +1204,8 @@ err_gpio_dir:
 	if (gpio_is_valid(pdata->slp_tr))
 		gpio_free(pdata->slp_tr);
 err_slp_tr:
-	gpio_free(pdata->rstn);
+	if (gpio_is_valid(pdata->rstn))
+		gpio_free(pdata->rstn);
 	return rc;
 }
 
@@ -1214,7 +1221,8 @@ static int at86rf230_remove(struct spi_device *spi)
 
 	if (gpio_is_valid(pdata->slp_tr))
 		gpio_free(pdata->slp_tr);
-	gpio_free(pdata->rstn);
+	if (gpio_is_valid(pdata->rstn))
+		gpio_free(pdata->rstn);
 
 	mutex_destroy(&lp->bmux);
 	ieee802154_free_device(lp->dev);
-- 
cgit v1.2.2


From fa2d3e9471b37c2d3cd3cede73065b3b867532ee Mon Sep 17 00:00:00 2001
From: Alexander Aring <alex.aring@gmail.com>
Date: Sat, 15 Mar 2014 09:29:07 +0100
Subject: at86rf230: add support for devicetree

This patch adds devicetree support for the at86rf230 driver.

Possible gpios to configure are "reset-gpio" and "sleep-gpio".
Also add support to configure the "irq-type" for the irq polarity
register.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ieee802154/at86rf230.c | 48 +++++++++++++++++++++++++++++++++++++-
 1 file changed, 47 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index 47677e3f986f..e8004ef73bc1 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -31,6 +31,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/at86rf230.h>
 #include <linux/skbuff.h>
+#include <linux/of_gpio.h>
 
 #include <net/mac802154.h>
 #include <net/wpan-phy.h>
@@ -1035,6 +1036,40 @@ static int at86rf230_hw_init(struct at86rf230_local *lp)
 	return 0;
 }
 
+static struct at86rf230_platform_data *
+at86rf230_get_pdata(struct spi_device *spi)
+{
+	struct at86rf230_platform_data *pdata;
+	const char *irq_type;
+
+	if (!IS_ENABLED(CONFIG_OF) || !spi->dev.of_node)
+		return spi->dev.platform_data;
+
+	pdata = devm_kzalloc(&spi->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		goto done;
+
+	pdata->rstn = of_get_named_gpio(spi->dev.of_node, "reset-gpio", 0);
+	pdata->slp_tr = of_get_named_gpio(spi->dev.of_node, "sleep-gpio", 0);
+
+	pdata->irq_type = IRQF_TRIGGER_RISING;
+	of_property_read_string(spi->dev.of_node, "irq-type", &irq_type);
+	if (!strcmp(irq_type, "level-high"))
+		pdata->irq_type = IRQF_TRIGGER_HIGH;
+	else if (!strcmp(irq_type, "level-low"))
+		pdata->irq_type = IRQF_TRIGGER_LOW;
+	else if (!strcmp(irq_type, "edge-rising"))
+		pdata->irq_type = IRQF_TRIGGER_RISING;
+	else if (!strcmp(irq_type, "edge-falling"))
+		pdata->irq_type = IRQF_TRIGGER_FALLING;
+	else
+		dev_warn(&spi->dev, "wrong irq-type specified using edge-rising\n");
+
+	spi->dev.platform_data = pdata;
+done:
+	return pdata;
+}
+
 static int at86rf230_probe(struct spi_device *spi)
 {
 	struct at86rf230_platform_data *pdata;
@@ -1053,7 +1088,7 @@ static int at86rf230_probe(struct spi_device *spi)
 		return -EINVAL;
 	}
 
-	pdata = spi->dev.platform_data;
+	pdata = at86rf230_get_pdata(spi);
 	if (!pdata) {
 		dev_err(&spi->dev, "no platform_data\n");
 		return -EINVAL;
@@ -1231,8 +1266,19 @@ static int at86rf230_remove(struct spi_device *spi)
 	return 0;
 }
 
+#if IS_ENABLED(CONFIG_OF)
+static struct of_device_id at86rf230_of_match[] = {
+	{ .compatible = "atmel,at86rf230", },
+	{ .compatible = "atmel,at86rf231", },
+	{ .compatible = "atmel,at86rf233", },
+	{ .compatible = "atmel,at86rf212", },
+	{ },
+};
+#endif
+
 static struct spi_driver at86rf230_driver = {
 	.driver = {
+		.of_match_table = of_match_ptr(at86rf230_of_match),
 		.name	= "at86rf230",
 		.owner	= THIS_MODULE,
 	},
-- 
cgit v1.2.2


From 94fb0ef4dc4bc7e0ea8c2cba3952833b7a4e5779 Mon Sep 17 00:00:00 2001
From: Vince Bridgers <vbridgers2013@gmail.com>
Date: Mon, 17 Mar 2014 17:52:35 -0500
Subject: Altera TSE: Add Altera Ethernet Driver MSGDMA File Components

This patch adds the MSGDMA soft IP support for the Altera Triple
Speed Ethernet driver.

Signed-off-by: Vince Bridgers <vbridgers2013@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/altera/altera_msgdma.c   | 202 ++++++++++++++++++++++++++
 drivers/net/ethernet/altera/altera_msgdma.h   |  34 +++++
 drivers/net/ethernet/altera/altera_msgdmahw.h | 167 +++++++++++++++++++++
 3 files changed, 403 insertions(+)
 create mode 100644 drivers/net/ethernet/altera/altera_msgdma.c
 create mode 100644 drivers/net/ethernet/altera/altera_msgdma.h
 create mode 100644 drivers/net/ethernet/altera/altera_msgdmahw.h

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/altera/altera_msgdma.c b/drivers/net/ethernet/altera/altera_msgdma.c
new file mode 100644
index 000000000000..3df18669ea30
--- /dev/null
+++ b/drivers/net/ethernet/altera/altera_msgdma.c
@@ -0,0 +1,202 @@
+/* Altera TSE SGDMA and MSGDMA Linux driver
+ * Copyright (C) 2014 Altera Corporation. All rights reserved
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/netdevice.h>
+#include "altera_utils.h"
+#include "altera_tse.h"
+#include "altera_msgdmahw.h"
+
+/* No initialization work to do for MSGDMA */
+int msgdma_initialize(struct altera_tse_private *priv)
+{
+	return 0;
+}
+
+void msgdma_uninitialize(struct altera_tse_private *priv)
+{
+}
+
+void msgdma_reset(struct altera_tse_private *priv)
+{
+	int counter;
+	struct msgdma_csr *txcsr =
+		(struct msgdma_csr *)priv->tx_dma_csr;
+	struct msgdma_csr *rxcsr =
+		(struct msgdma_csr *)priv->rx_dma_csr;
+
+	/* Reset Rx mSGDMA */
+	iowrite32(MSGDMA_CSR_STAT_MASK, &rxcsr->status);
+	iowrite32(MSGDMA_CSR_CTL_RESET, &rxcsr->control);
+
+	counter = 0;
+	while (counter++ < ALTERA_TSE_SW_RESET_WATCHDOG_CNTR) {
+		if (tse_bit_is_clear(&rxcsr->status,
+				     MSGDMA_CSR_STAT_RESETTING))
+			break;
+		udelay(1);
+	}
+
+	if (counter >= ALTERA_TSE_SW_RESET_WATCHDOG_CNTR)
+		netif_warn(priv, drv, priv->dev,
+			   "TSE Rx mSGDMA resetting bit never cleared!\n");
+
+	/* clear all status bits */
+	iowrite32(MSGDMA_CSR_STAT_MASK, &rxcsr->status);
+
+	/* Reset Tx mSGDMA */
+	iowrite32(MSGDMA_CSR_STAT_MASK, &txcsr->status);
+	iowrite32(MSGDMA_CSR_CTL_RESET, &txcsr->control);
+
+	counter = 0;
+	while (counter++ < ALTERA_TSE_SW_RESET_WATCHDOG_CNTR) {
+		if (tse_bit_is_clear(&txcsr->status,
+				     MSGDMA_CSR_STAT_RESETTING))
+			break;
+		udelay(1);
+	}
+
+	if (counter >= ALTERA_TSE_SW_RESET_WATCHDOG_CNTR)
+		netif_warn(priv, drv, priv->dev,
+			   "TSE Tx mSGDMA resetting bit never cleared!\n");
+
+	/* clear all status bits */
+	iowrite32(MSGDMA_CSR_STAT_MASK, &txcsr->status);
+}
+
+void msgdma_disable_rxirq(struct altera_tse_private *priv)
+{
+	struct msgdma_csr *csr = priv->rx_dma_csr;
+	tse_clear_bit(&csr->control, MSGDMA_CSR_CTL_GLOBAL_INTR);
+}
+
+void msgdma_enable_rxirq(struct altera_tse_private *priv)
+{
+	struct msgdma_csr *csr = priv->rx_dma_csr;
+	tse_set_bit(&csr->control, MSGDMA_CSR_CTL_GLOBAL_INTR);
+}
+
+void msgdma_disable_txirq(struct altera_tse_private *priv)
+{
+	struct msgdma_csr *csr = priv->tx_dma_csr;
+	tse_clear_bit(&csr->control, MSGDMA_CSR_CTL_GLOBAL_INTR);
+}
+
+void msgdma_enable_txirq(struct altera_tse_private *priv)
+{
+	struct msgdma_csr *csr = priv->tx_dma_csr;
+	tse_set_bit(&csr->control, MSGDMA_CSR_CTL_GLOBAL_INTR);
+}
+
+void msgdma_clear_rxirq(struct altera_tse_private *priv)
+{
+	struct msgdma_csr *csr = priv->rx_dma_csr;
+	iowrite32(MSGDMA_CSR_STAT_IRQ, &csr->status);
+}
+
+void msgdma_clear_txirq(struct altera_tse_private *priv)
+{
+	struct msgdma_csr *csr = priv->tx_dma_csr;
+	iowrite32(MSGDMA_CSR_STAT_IRQ, &csr->status);
+}
+
+/* return 0 to indicate transmit is pending */
+int msgdma_tx_buffer(struct altera_tse_private *priv, struct tse_buffer *buffer)
+{
+	struct msgdma_extended_desc *desc = priv->tx_dma_desc;
+
+	iowrite32(lower_32_bits(buffer->dma_addr), &desc->read_addr_lo);
+	iowrite32(upper_32_bits(buffer->dma_addr), &desc->read_addr_hi);
+	iowrite32(0, &desc->write_addr_lo);
+	iowrite32(0, &desc->write_addr_hi);
+	iowrite32(buffer->len, &desc->len);
+	iowrite32(0, &desc->burst_seq_num);
+	iowrite32(MSGDMA_DESC_TX_STRIDE, &desc->stride);
+	iowrite32(MSGDMA_DESC_CTL_TX_SINGLE, &desc->control);
+	return 0;
+}
+
+u32 msgdma_tx_completions(struct altera_tse_private *priv)
+{
+	u32 ready = 0;
+	u32 inuse;
+	u32 status;
+	struct msgdma_csr *txcsr =
+		(struct msgdma_csr *)priv->tx_dma_csr;
+
+	/* Get number of sent descriptors */
+	inuse = ioread32(&txcsr->rw_fill_level) & 0xffff;
+
+	if (inuse) { /* Tx FIFO is not empty */
+		ready = priv->tx_prod - priv->tx_cons - inuse - 1;
+	} else {
+		/* Check for buffered last packet */
+		status = ioread32(&txcsr->status);
+		if (status & MSGDMA_CSR_STAT_BUSY)
+			ready = priv->tx_prod - priv->tx_cons - 1;
+		else
+			ready = priv->tx_prod - priv->tx_cons;
+	}
+	return ready;
+}
+
+/* Put buffer to the mSGDMA RX FIFO
+ */
+int msgdma_add_rx_desc(struct altera_tse_private *priv,
+			struct tse_buffer *rxbuffer)
+{
+	struct msgdma_extended_desc *desc = priv->rx_dma_desc;
+	u32 len = priv->rx_dma_buf_sz;
+	dma_addr_t dma_addr = rxbuffer->dma_addr;
+	u32 control = (MSGDMA_DESC_CTL_END_ON_EOP
+			| MSGDMA_DESC_CTL_END_ON_LEN
+			| MSGDMA_DESC_CTL_TR_COMP_IRQ
+			| MSGDMA_DESC_CTL_EARLY_IRQ
+			| MSGDMA_DESC_CTL_TR_ERR_IRQ
+			| MSGDMA_DESC_CTL_GO);
+
+	iowrite32(0, &desc->read_addr_lo);
+	iowrite32(0, &desc->read_addr_hi);
+	iowrite32(lower_32_bits(dma_addr), &desc->write_addr_lo);
+	iowrite32(upper_32_bits(dma_addr), &desc->write_addr_hi);
+	iowrite32(len, &desc->len);
+	iowrite32(0, &desc->burst_seq_num);
+	iowrite32(0x00010001, &desc->stride);
+	iowrite32(control, &desc->control);
+	return 1;
+}
+
+/* status is returned on upper 16 bits,
+ * length is returned in lower 16 bits
+ */
+u32 msgdma_rx_status(struct altera_tse_private *priv)
+{
+	u32 rxstatus = 0;
+	u32 pktlength;
+	u32 pktstatus;
+	struct msgdma_csr *rxcsr =
+		(struct msgdma_csr *)priv->rx_dma_csr;
+	struct msgdma_response *rxresp =
+		(struct msgdma_response *)priv->rx_dma_resp;
+
+	if (ioread32(&rxcsr->resp_fill_level) & 0xffff) {
+		pktlength = ioread32(&rxresp->bytes_transferred);
+		pktstatus = ioread32(&rxresp->status);
+		rxstatus = pktstatus;
+		rxstatus = rxstatus << 16;
+		rxstatus |= (pktlength & 0xffff);
+	}
+	return rxstatus;
+}
diff --git a/drivers/net/ethernet/altera/altera_msgdma.h b/drivers/net/ethernet/altera/altera_msgdma.h
new file mode 100644
index 000000000000..7f0f5bf2bba2
--- /dev/null
+++ b/drivers/net/ethernet/altera/altera_msgdma.h
@@ -0,0 +1,34 @@
+/* Altera TSE SGDMA and MSGDMA Linux driver
+ * Copyright (C) 2014 Altera Corporation. All rights reserved
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __ALTERA_MSGDMA_H__
+#define __ALTERA_MSGDMA_H__
+
+void msgdma_reset(struct altera_tse_private *);
+void msgdma_enable_txirq(struct altera_tse_private *);
+void msgdma_enable_rxirq(struct altera_tse_private *);
+void msgdma_disable_rxirq(struct altera_tse_private *);
+void msgdma_disable_txirq(struct altera_tse_private *);
+void msgdma_clear_rxirq(struct altera_tse_private *);
+void msgdma_clear_txirq(struct altera_tse_private *);
+u32 msgdma_tx_completions(struct altera_tse_private *);
+int msgdma_add_rx_desc(struct altera_tse_private *, struct tse_buffer *);
+int msgdma_tx_buffer(struct altera_tse_private *, struct tse_buffer *);
+u32 msgdma_rx_status(struct altera_tse_private *);
+int msgdma_initialize(struct altera_tse_private *);
+void msgdma_uninitialize(struct altera_tse_private *);
+
+#endif /*  __ALTERA_MSGDMA_H__ */
diff --git a/drivers/net/ethernet/altera/altera_msgdmahw.h b/drivers/net/ethernet/altera/altera_msgdmahw.h
new file mode 100644
index 000000000000..d7b59ba4019c
--- /dev/null
+++ b/drivers/net/ethernet/altera/altera_msgdmahw.h
@@ -0,0 +1,167 @@
+/* Altera TSE SGDMA and MSGDMA Linux driver
+ * Copyright (C) 2014 Altera Corporation. All rights reserved
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __ALTERA_MSGDMAHW_H__
+#define __ALTERA_MSGDMAHW_H__
+
+/* mSGDMA standard descriptor format
+ */
+struct msgdma_desc {
+	u32 read_addr;	/* data buffer source address */
+	u32 write_addr;	/* data buffer destination address */
+	u32 len;	/* the number of bytes to transfer per descriptor */
+	u32 control;	/* characteristics of the transfer */
+};
+
+/* mSGDMA extended descriptor format
+ */
+struct msgdma_extended_desc {
+	u32 read_addr_lo;	/* data buffer source address low bits */
+	u32 write_addr_lo;	/* data buffer destination address low bits */
+	u32 len;		/* the number of bytes to transfer
+				 * per descriptor
+				 */
+	u32 burst_seq_num;	/* bit 31:24 write burst
+				 * bit 23:16 read burst
+				 * bit 15:0  sequence number
+				 */
+	u32 stride;		/* bit 31:16 write stride
+				 * bit 15:0  read stride
+				 */
+	u32 read_addr_hi;	/* data buffer source address high bits */
+	u32 write_addr_hi;	/* data buffer destination address high bits */
+	u32 control;		/* characteristics of the transfer */
+};
+
+/* mSGDMA descriptor control field bit definitions
+ */
+#define MSGDMA_DESC_CTL_SET_CH(x)	((x) & 0xff)
+#define MSGDMA_DESC_CTL_GEN_SOP		BIT(8)
+#define MSGDMA_DESC_CTL_GEN_EOP		BIT(9)
+#define MSGDMA_DESC_CTL_PARK_READS	BIT(10)
+#define MSGDMA_DESC_CTL_PARK_WRITES	BIT(11)
+#define MSGDMA_DESC_CTL_END_ON_EOP	BIT(12)
+#define MSGDMA_DESC_CTL_END_ON_LEN	BIT(13)
+#define MSGDMA_DESC_CTL_TR_COMP_IRQ	BIT(14)
+#define MSGDMA_DESC_CTL_EARLY_IRQ	BIT(15)
+#define MSGDMA_DESC_CTL_TR_ERR_IRQ	(0xff << 16)
+#define MSGDMA_DESC_CTL_EARLY_DONE	BIT(24)
+/* Writing ‘1’ to the ‘go’ bit commits the entire descriptor into the
+ * descriptor FIFO(s)
+ */
+#define MSGDMA_DESC_CTL_GO		BIT(31)
+
+/* Tx buffer control flags
+ */
+#define MSGDMA_DESC_CTL_TX_FIRST	(MSGDMA_DESC_CTL_GEN_SOP |	\
+					 MSGDMA_DESC_CTL_TR_ERR_IRQ |	\
+					 MSGDMA_DESC_CTL_GO)
+
+#define MSGDMA_DESC_CTL_TX_MIDDLE	(MSGDMA_DESC_CTL_TR_ERR_IRQ |	\
+					 MSGDMA_DESC_CTL_GO)
+
+#define MSGDMA_DESC_CTL_TX_LAST		(MSGDMA_DESC_CTL_GEN_EOP |	\
+					 MSGDMA_DESC_CTL_TR_COMP_IRQ |	\
+					 MSGDMA_DESC_CTL_TR_ERR_IRQ |	\
+					 MSGDMA_DESC_CTL_GO)
+
+#define MSGDMA_DESC_CTL_TX_SINGLE	(MSGDMA_DESC_CTL_GEN_SOP |	\
+					 MSGDMA_DESC_CTL_GEN_EOP |	\
+					 MSGDMA_DESC_CTL_TR_COMP_IRQ |	\
+					 MSGDMA_DESC_CTL_TR_ERR_IRQ |	\
+					 MSGDMA_DESC_CTL_GO)
+
+#define MSGDMA_DESC_CTL_RX_SINGLE	(MSGDMA_DESC_CTL_END_ON_EOP |	\
+					 MSGDMA_DESC_CTL_END_ON_LEN |	\
+					 MSGDMA_DESC_CTL_TR_COMP_IRQ |	\
+					 MSGDMA_DESC_CTL_EARLY_IRQ |	\
+					 MSGDMA_DESC_CTL_TR_ERR_IRQ |	\
+					 MSGDMA_DESC_CTL_GO)
+
+/* mSGDMA extended descriptor stride definitions
+ */
+#define MSGDMA_DESC_TX_STRIDE		(0x00010001)
+#define MSGDMA_DESC_RX_STRIDE		(0x00010001)
+
+/* mSGDMA dispatcher control and status register map
+ */
+struct msgdma_csr {
+	u32 status;		/* Read/Clear */
+	u32 control;		/* Read/Write */
+	u32 rw_fill_level;	/* bit 31:16 - write fill level
+				 * bit 15:0  - read fill level
+				 */
+	u32 resp_fill_level;	/* bit 15:0 */
+	u32 rw_seq_num;		/* bit 31:16 - write sequence number
+				 * bit 15:0  - read sequence number
+				 */
+	u32 pad[3];		/* reserved */
+};
+
+/* mSGDMA CSR status register bit definitions
+ */
+#define MSGDMA_CSR_STAT_BUSY			BIT(0)
+#define MSGDMA_CSR_STAT_DESC_BUF_EMPTY		BIT(1)
+#define MSGDMA_CSR_STAT_DESC_BUF_FULL		BIT(2)
+#define MSGDMA_CSR_STAT_RESP_BUF_EMPTY		BIT(3)
+#define MSGDMA_CSR_STAT_RESP_BUF_FULL		BIT(4)
+#define MSGDMA_CSR_STAT_STOPPED			BIT(5)
+#define MSGDMA_CSR_STAT_RESETTING		BIT(6)
+#define MSGDMA_CSR_STAT_STOPPED_ON_ERR		BIT(7)
+#define MSGDMA_CSR_STAT_STOPPED_ON_EARLY	BIT(8)
+#define MSGDMA_CSR_STAT_IRQ			BIT(9)
+#define MSGDMA_CSR_STAT_MASK			0x3FF
+#define MSGDMA_CSR_STAT_MASK_WITHOUT_IRQ	0x1FF
+
+#define MSGDMA_CSR_STAT_BUSY_GET(v)			GET_BIT_VALUE(v, 0)
+#define MSGDMA_CSR_STAT_DESC_BUF_EMPTY_GET(v)		GET_BIT_VALUE(v, 1)
+#define MSGDMA_CSR_STAT_DESC_BUF_FULL_GET(v)		GET_BIT_VALUE(v, 2)
+#define MSGDMA_CSR_STAT_RESP_BUF_EMPTY_GET(v)		GET_BIT_VALUE(v, 3)
+#define MSGDMA_CSR_STAT_RESP_BUF_FULL_GET(v)		GET_BIT_VALUE(v, 4)
+#define MSGDMA_CSR_STAT_STOPPED_GET(v)			GET_BIT_VALUE(v, 5)
+#define MSGDMA_CSR_STAT_RESETTING_GET(v)		GET_BIT_VALUE(v, 6)
+#define MSGDMA_CSR_STAT_STOPPED_ON_ERR_GET(v)		GET_BIT_VALUE(v, 7)
+#define MSGDMA_CSR_STAT_STOPPED_ON_EARLY_GET(v)		GET_BIT_VALUE(v, 8)
+#define MSGDMA_CSR_STAT_IRQ_GET(v)			GET_BIT_VALUE(v, 9)
+
+/* mSGDMA CSR control register bit definitions
+ */
+#define MSGDMA_CSR_CTL_STOP			BIT(0)
+#define MSGDMA_CSR_CTL_RESET			BIT(1)
+#define MSGDMA_CSR_CTL_STOP_ON_ERR		BIT(2)
+#define MSGDMA_CSR_CTL_STOP_ON_EARLY		BIT(3)
+#define MSGDMA_CSR_CTL_GLOBAL_INTR		BIT(4)
+#define MSGDMA_CSR_CTL_STOP_DESCS		BIT(5)
+
+/* mSGDMA CSR fill level bits
+ */
+#define MSGDMA_CSR_WR_FILL_LEVEL_GET(v)		(((v) & 0xffff0000) >> 16)
+#define MSGDMA_CSR_RD_FILL_LEVEL_GET(v)		((v) & 0x0000ffff)
+#define MSGDMA_CSR_RESP_FILL_LEVEL_GET(v)	((v) & 0x0000ffff)
+
+/* mSGDMA response register map
+ */
+struct msgdma_response {
+	u32 bytes_transferred;
+	u32 status;
+};
+
+/* mSGDMA response register bit definitions
+ */
+#define MSGDMA_RESP_EARLY_TERM	BIT(8)
+#define MSGDMA_RESP_ERR_MASK	0xFF
+
+#endif /* __ALTERA_MSGDMA_H__*/
-- 
cgit v1.2.2


From f64f8808bcb9965e7e935bfab17951726750654b Mon Sep 17 00:00:00 2001
From: Vince Bridgers <vbridgers2013@gmail.com>
Date: Mon, 17 Mar 2014 17:52:36 -0500
Subject: Altera TSE: Add Altera Ethernet Driver SGDMA file components

This patch adds the SGDMA soft IP support for the Altera Triple
Speed Ethernet driver.

Signed-off-by: Vince Bridgers <vbridgers2013@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/altera/altera_sgdma.c   | 511 +++++++++++++++++++++++++++
 drivers/net/ethernet/altera/altera_sgdma.h   |  35 ++
 drivers/net/ethernet/altera/altera_sgdmahw.h | 124 +++++++
 3 files changed, 670 insertions(+)
 create mode 100644 drivers/net/ethernet/altera/altera_sgdma.c
 create mode 100644 drivers/net/ethernet/altera/altera_sgdma.h
 create mode 100644 drivers/net/ethernet/altera/altera_sgdmahw.h

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/altera/altera_sgdma.c b/drivers/net/ethernet/altera/altera_sgdma.c
new file mode 100644
index 000000000000..cbeee073a9ff
--- /dev/null
+++ b/drivers/net/ethernet/altera/altera_sgdma.c
@@ -0,0 +1,511 @@
+/* Altera TSE SGDMA and MSGDMA Linux driver
+ * Copyright (C) 2014 Altera Corporation. All rights reserved
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/list.h>
+#include "altera_utils.h"
+#include "altera_tse.h"
+#include "altera_sgdmahw.h"
+#include "altera_sgdma.h"
+
+static void sgdma_descrip(struct sgdma_descrip *desc,
+			  struct sgdma_descrip *ndesc,
+			  dma_addr_t ndesc_phys,
+			  dma_addr_t raddr,
+			  dma_addr_t waddr,
+			  u16 length,
+			  int generate_eop,
+			  int rfixed,
+			  int wfixed);
+
+static int sgdma_async_write(struct altera_tse_private *priv,
+			      struct sgdma_descrip *desc);
+
+static int sgdma_async_read(struct altera_tse_private *priv);
+
+static dma_addr_t
+sgdma_txphysaddr(struct altera_tse_private *priv,
+		 struct sgdma_descrip *desc);
+
+static dma_addr_t
+sgdma_rxphysaddr(struct altera_tse_private *priv,
+		 struct sgdma_descrip *desc);
+
+static int sgdma_txbusy(struct altera_tse_private *priv);
+
+static int sgdma_rxbusy(struct altera_tse_private *priv);
+
+static void
+queue_tx(struct altera_tse_private *priv, struct tse_buffer *buffer);
+
+static void
+queue_rx(struct altera_tse_private *priv, struct tse_buffer *buffer);
+
+static struct tse_buffer *
+dequeue_tx(struct altera_tse_private *priv);
+
+static struct tse_buffer *
+dequeue_rx(struct altera_tse_private *priv);
+
+static struct tse_buffer *
+queue_rx_peekhead(struct altera_tse_private *priv);
+
+int sgdma_initialize(struct altera_tse_private *priv)
+{
+	priv->txctrlreg = SGDMA_CTRLREG_ILASTD;
+
+	priv->rxctrlreg = SGDMA_CTRLREG_IDESCRIP |
+		      SGDMA_CTRLREG_ILASTD;
+
+	INIT_LIST_HEAD(&priv->txlisthd);
+	INIT_LIST_HEAD(&priv->rxlisthd);
+
+	priv->rxdescphys = (dma_addr_t) 0;
+	priv->txdescphys = (dma_addr_t) 0;
+
+	priv->rxdescphys = dma_map_single(priv->device, priv->rx_dma_desc,
+					  priv->rxdescmem, DMA_BIDIRECTIONAL);
+
+	if (dma_mapping_error(priv->device, priv->rxdescphys)) {
+		sgdma_uninitialize(priv);
+		netdev_err(priv->dev, "error mapping rx descriptor memory\n");
+		return -EINVAL;
+	}
+
+	priv->txdescphys = dma_map_single(priv->device, priv->rx_dma_desc,
+					  priv->rxdescmem, DMA_TO_DEVICE);
+
+	if (dma_mapping_error(priv->device, priv->txdescphys)) {
+		sgdma_uninitialize(priv);
+		netdev_err(priv->dev, "error mapping tx descriptor memory\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+void sgdma_uninitialize(struct altera_tse_private *priv)
+{
+	if (priv->rxdescphys)
+		dma_unmap_single(priv->device, priv->rxdescphys,
+				 priv->rxdescmem, DMA_BIDIRECTIONAL);
+
+	if (priv->txdescphys)
+		dma_unmap_single(priv->device, priv->txdescphys,
+				 priv->txdescmem, DMA_TO_DEVICE);
+}
+
+/* This function resets the SGDMA controller and clears the
+ * descriptor memory used for transmits and receives.
+ */
+void sgdma_reset(struct altera_tse_private *priv)
+{
+	u32 *ptxdescripmem = (u32 *)priv->tx_dma_desc;
+	u32 txdescriplen   = priv->txdescmem;
+	u32 *prxdescripmem = (u32 *)priv->rx_dma_desc;
+	u32 rxdescriplen   = priv->rxdescmem;
+	struct sgdma_csr *ptxsgdma = (struct sgdma_csr *)priv->tx_dma_csr;
+	struct sgdma_csr *prxsgdma = (struct sgdma_csr *)priv->rx_dma_csr;
+
+	/* Initialize descriptor memory to 0 */
+	memset(ptxdescripmem, 0, txdescriplen);
+	memset(prxdescripmem, 0, rxdescriplen);
+
+	iowrite32(SGDMA_CTRLREG_RESET, &ptxsgdma->control);
+	iowrite32(0, &ptxsgdma->control);
+
+	iowrite32(SGDMA_CTRLREG_RESET, &prxsgdma->control);
+	iowrite32(0, &prxsgdma->control);
+}
+
+void sgdma_enable_rxirq(struct altera_tse_private *priv)
+{
+	struct sgdma_csr *csr = (struct sgdma_csr *)priv->rx_dma_csr;
+	priv->rxctrlreg |= SGDMA_CTRLREG_INTEN;
+	tse_set_bit(&csr->control, SGDMA_CTRLREG_INTEN);
+}
+
+void sgdma_enable_txirq(struct altera_tse_private *priv)
+{
+	struct sgdma_csr *csr = (struct sgdma_csr *)priv->tx_dma_csr;
+	priv->txctrlreg |= SGDMA_CTRLREG_INTEN;
+	tse_set_bit(&csr->control, SGDMA_CTRLREG_INTEN);
+}
+
+/* for SGDMA, RX interrupts remain enabled after enabling */
+void sgdma_disable_rxirq(struct altera_tse_private *priv)
+{
+}
+
+/* for SGDMA, TX interrupts remain enabled after enabling */
+void sgdma_disable_txirq(struct altera_tse_private *priv)
+{
+}
+
+void sgdma_clear_rxirq(struct altera_tse_private *priv)
+{
+	struct sgdma_csr *csr = (struct sgdma_csr *)priv->rx_dma_csr;
+	tse_set_bit(&csr->control, SGDMA_CTRLREG_CLRINT);
+}
+
+void sgdma_clear_txirq(struct altera_tse_private *priv)
+{
+	struct sgdma_csr *csr = (struct sgdma_csr *)priv->tx_dma_csr;
+	tse_set_bit(&csr->control, SGDMA_CTRLREG_CLRINT);
+}
+
+/* transmits buffer through SGDMA. Returns number of buffers
+ * transmitted, 0 if not possible.
+ *
+ * tx_lock is held by the caller
+ */
+int sgdma_tx_buffer(struct altera_tse_private *priv, struct tse_buffer *buffer)
+{
+	int pktstx = 0;
+	struct sgdma_descrip *descbase =
+		(struct sgdma_descrip *)priv->tx_dma_desc;
+
+	struct sgdma_descrip *cdesc = &descbase[0];
+	struct sgdma_descrip *ndesc = &descbase[1];
+
+	/* wait 'til the tx sgdma is ready for the next transmit request */
+	if (sgdma_txbusy(priv))
+		return 0;
+
+	sgdma_descrip(cdesc,			/* current descriptor */
+		      ndesc,			/* next descriptor */
+		      sgdma_txphysaddr(priv, ndesc),
+		      buffer->dma_addr,		/* address of packet to xmit */
+		      0,			/* write addr 0 for tx dma */
+		      buffer->len,		/* length of packet */
+		      SGDMA_CONTROL_EOP,	/* Generate EOP */
+		      0,			/* read fixed */
+		      SGDMA_CONTROL_WR_FIXED);	/* Generate SOP */
+
+	pktstx = sgdma_async_write(priv, cdesc);
+
+	/* enqueue the request to the pending transmit queue */
+	queue_tx(priv, buffer);
+
+	return 1;
+}
+
+
+/* tx_lock held to protect access to queued tx list
+ */
+u32 sgdma_tx_completions(struct altera_tse_private *priv)
+{
+	u32 ready = 0;
+	struct sgdma_descrip *desc = (struct sgdma_descrip *)priv->tx_dma_desc;
+
+	if (!sgdma_txbusy(priv) &&
+	    ((desc->control & SGDMA_CONTROL_HW_OWNED) == 0) &&
+	    (dequeue_tx(priv))) {
+		ready = 1;
+	}
+
+	return ready;
+}
+
+int sgdma_add_rx_desc(struct altera_tse_private *priv,
+		      struct tse_buffer *rxbuffer)
+{
+	queue_rx(priv, rxbuffer);
+	return sgdma_async_read(priv);
+}
+
+/* status is returned on upper 16 bits,
+ * length is returned in lower 16 bits
+ */
+u32 sgdma_rx_status(struct altera_tse_private *priv)
+{
+	struct sgdma_csr *csr = (struct sgdma_csr *)priv->rx_dma_csr;
+	struct sgdma_descrip *base = (struct sgdma_descrip *)priv->rx_dma_desc;
+	struct sgdma_descrip *desc = NULL;
+	int pktsrx;
+	unsigned int rxstatus = 0;
+	unsigned int pktlength = 0;
+	unsigned int pktstatus = 0;
+	struct tse_buffer *rxbuffer = NULL;
+
+	dma_sync_single_for_cpu(priv->device,
+				priv->rxdescphys,
+				priv->rxdescmem,
+				DMA_BIDIRECTIONAL);
+
+	desc = &base[0];
+	if ((ioread32(&csr->status) & SGDMA_STSREG_EOP) ||
+	    (desc->status & SGDMA_STATUS_EOP)) {
+		pktlength = desc->bytes_xferred;
+		pktstatus = desc->status & 0x3f;
+		rxstatus = pktstatus;
+		rxstatus = rxstatus << 16;
+		rxstatus |= (pktlength & 0xffff);
+
+		desc->status = 0;
+
+		rxbuffer = dequeue_rx(priv);
+		if (rxbuffer == NULL)
+			netdev_err(priv->dev,
+				   "sgdma rx and rx queue empty!\n");
+
+		/* kick the rx sgdma after reaping this descriptor */
+		pktsrx = sgdma_async_read(priv);
+	}
+
+	return rxstatus;
+}
+
+
+/* Private functions */
+static void sgdma_descrip(struct sgdma_descrip *desc,
+			  struct sgdma_descrip *ndesc,
+			  dma_addr_t ndesc_phys,
+			  dma_addr_t raddr,
+			  dma_addr_t waddr,
+			  u16 length,
+			  int generate_eop,
+			  int rfixed,
+			  int wfixed)
+{
+	/* Clear the next descriptor as not owned by hardware */
+	u32 ctrl = ndesc->control;
+	ctrl &= ~SGDMA_CONTROL_HW_OWNED;
+	ndesc->control = ctrl;
+
+	ctrl = 0;
+	ctrl = SGDMA_CONTROL_HW_OWNED;
+	ctrl |= generate_eop;
+	ctrl |= rfixed;
+	ctrl |= wfixed;
+
+	/* Channel is implicitly zero, initialized to 0 by default */
+
+	desc->raddr = raddr;
+	desc->waddr = waddr;
+	desc->next = lower_32_bits(ndesc_phys);
+	desc->control = ctrl;
+	desc->status = 0;
+	desc->rburst = 0;
+	desc->wburst = 0;
+	desc->bytes = length;
+	desc->bytes_xferred = 0;
+}
+
+/* If hardware is busy, don't restart async read.
+ * if status register is 0 - meaning initial state, restart async read,
+ * probably for the first time when populating a receive buffer.
+ * If read status indicate not busy and a status, restart the async
+ * DMA read.
+ */
+static int sgdma_async_read(struct altera_tse_private *priv)
+{
+	struct sgdma_csr *csr = (struct sgdma_csr *)priv->rx_dma_csr;
+	struct sgdma_descrip *descbase =
+		(struct sgdma_descrip *)priv->rx_dma_desc;
+
+	struct sgdma_descrip *cdesc = &descbase[0];
+	struct sgdma_descrip *ndesc = &descbase[1];
+
+	unsigned int sts = ioread32(&csr->status);
+	struct tse_buffer *rxbuffer = NULL;
+
+	if (!sgdma_rxbusy(priv)) {
+		rxbuffer = queue_rx_peekhead(priv);
+		if (rxbuffer == NULL)
+			return 0;
+
+		sgdma_descrip(cdesc,		/* current descriptor */
+			      ndesc,		/* next descriptor */
+			      sgdma_rxphysaddr(priv, ndesc),
+			      0,		/* read addr 0 for rx dma */
+			      rxbuffer->dma_addr, /* write addr for rx dma */
+			      0,		/* read 'til EOP */
+			      0,		/* EOP: NA for rx dma */
+			      0,		/* read fixed: NA for rx dma */
+			      0);		/* SOP: NA for rx DMA */
+
+		/* clear control and status */
+		iowrite32(0, &csr->control);
+
+		/* If statuc available, clear those bits */
+		if (sts & 0xf)
+			iowrite32(0xf, &csr->status);
+
+		dma_sync_single_for_device(priv->device,
+					   priv->rxdescphys,
+					   priv->rxdescmem,
+					   DMA_BIDIRECTIONAL);
+
+		iowrite32(lower_32_bits(sgdma_rxphysaddr(priv, cdesc)),
+			  &csr->next_descrip);
+
+		iowrite32((priv->rxctrlreg | SGDMA_CTRLREG_START),
+			  &csr->control);
+
+		return 1;
+	}
+
+	return 0;
+}
+
+static int sgdma_async_write(struct altera_tse_private *priv,
+			     struct sgdma_descrip *desc)
+{
+	struct sgdma_csr *csr = (struct sgdma_csr *)priv->tx_dma_csr;
+
+	if (sgdma_txbusy(priv))
+		return 0;
+
+	/* clear control and status */
+	iowrite32(0, &csr->control);
+	iowrite32(0x1f, &csr->status);
+
+	dma_sync_single_for_device(priv->device, priv->txdescphys,
+				   priv->txdescmem, DMA_TO_DEVICE);
+
+	iowrite32(lower_32_bits(sgdma_txphysaddr(priv, desc)),
+		  &csr->next_descrip);
+
+	iowrite32((priv->txctrlreg | SGDMA_CTRLREG_START),
+		  &csr->control);
+
+	return 1;
+}
+
+static dma_addr_t
+sgdma_txphysaddr(struct altera_tse_private *priv,
+		 struct sgdma_descrip *desc)
+{
+	dma_addr_t paddr = priv->txdescmem_busaddr;
+	dma_addr_t offs = (dma_addr_t)((dma_addr_t)desc -
+				(dma_addr_t)priv->tx_dma_desc);
+	return paddr + offs;
+}
+
+static dma_addr_t
+sgdma_rxphysaddr(struct altera_tse_private *priv,
+		 struct sgdma_descrip *desc)
+{
+	dma_addr_t paddr = priv->rxdescmem_busaddr;
+	dma_addr_t offs = (dma_addr_t)((dma_addr_t)desc -
+				(dma_addr_t)priv->rx_dma_desc);
+	return paddr + offs;
+}
+
+#define list_remove_head(list, entry, type, member)			\
+	do {								\
+		entry = NULL;						\
+		if (!list_empty(list)) {				\
+			entry = list_entry((list)->next, type, member);	\
+			list_del_init(&entry->member);			\
+		}							\
+	} while (0)
+
+#define list_peek_head(list, entry, type, member)			\
+	do {								\
+		entry = NULL;						\
+		if (!list_empty(list)) {				\
+			entry = list_entry((list)->next, type, member);	\
+		}							\
+	} while (0)
+
+/* adds a tse_buffer to the tail of a tx buffer list.
+ * assumes the caller is managing and holding a mutual exclusion
+ * primitive to avoid simultaneous pushes/pops to the list.
+ */
+static void
+queue_tx(struct altera_tse_private *priv, struct tse_buffer *buffer)
+{
+	list_add_tail(&buffer->lh, &priv->txlisthd);
+}
+
+
+/* adds a tse_buffer to the tail of a rx buffer list
+ * assumes the caller is managing and holding a mutual exclusion
+ * primitive to avoid simultaneous pushes/pops to the list.
+ */
+static void
+queue_rx(struct altera_tse_private *priv, struct tse_buffer *buffer)
+{
+	list_add_tail(&buffer->lh, &priv->rxlisthd);
+}
+
+/* dequeues a tse_buffer from the transmit buffer list, otherwise
+ * returns NULL if empty.
+ * assumes the caller is managing and holding a mutual exclusion
+ * primitive to avoid simultaneous pushes/pops to the list.
+ */
+static struct tse_buffer *
+dequeue_tx(struct altera_tse_private *priv)
+{
+	struct tse_buffer *buffer = NULL;
+	list_remove_head(&priv->txlisthd, buffer, struct tse_buffer, lh);
+	return buffer;
+}
+
+/* dequeues a tse_buffer from the receive buffer list, otherwise
+ * returns NULL if empty
+ * assumes the caller is managing and holding a mutual exclusion
+ * primitive to avoid simultaneous pushes/pops to the list.
+ */
+static struct tse_buffer *
+dequeue_rx(struct altera_tse_private *priv)
+{
+	struct tse_buffer *buffer = NULL;
+	list_remove_head(&priv->rxlisthd, buffer, struct tse_buffer, lh);
+	return buffer;
+}
+
+/* dequeues a tse_buffer from the receive buffer list, otherwise
+ * returns NULL if empty
+ * assumes the caller is managing and holding a mutual exclusion
+ * primitive to avoid simultaneous pushes/pops to the list while the
+ * head is being examined.
+ */
+static struct tse_buffer *
+queue_rx_peekhead(struct altera_tse_private *priv)
+{
+	struct tse_buffer *buffer = NULL;
+	list_peek_head(&priv->rxlisthd, buffer, struct tse_buffer, lh);
+	return buffer;
+}
+
+/* check and return rx sgdma status without polling
+ */
+static int sgdma_rxbusy(struct altera_tse_private *priv)
+{
+	struct sgdma_csr *csr = (struct sgdma_csr *)priv->rx_dma_csr;
+	return ioread32(&csr->status) & SGDMA_STSREG_BUSY;
+}
+
+/* waits for the tx sgdma to finish it's current operation, returns 0
+ * when it transitions to nonbusy, returns 1 if the operation times out
+ */
+static int sgdma_txbusy(struct altera_tse_private *priv)
+{
+	int delay = 0;
+	struct sgdma_csr *csr = (struct sgdma_csr *)priv->tx_dma_csr;
+
+	/* if DMA is busy, wait for current transactino to finish */
+	while ((ioread32(&csr->status) & SGDMA_STSREG_BUSY) && (delay++ < 100))
+		udelay(1);
+
+	if (ioread32(&csr->status) & SGDMA_STSREG_BUSY) {
+		netdev_err(priv->dev, "timeout waiting for tx dma\n");
+		return 1;
+	}
+	return 0;
+}
diff --git a/drivers/net/ethernet/altera/altera_sgdma.h b/drivers/net/ethernet/altera/altera_sgdma.h
new file mode 100644
index 000000000000..07d471729dc4
--- /dev/null
+++ b/drivers/net/ethernet/altera/altera_sgdma.h
@@ -0,0 +1,35 @@
+/* Altera TSE SGDMA and MSGDMA Linux driver
+ * Copyright (C) 2014 Altera Corporation. All rights reserved
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __ALTERA_SGDMA_H__
+#define __ALTERA_SGDMA_H__
+
+void sgdma_reset(struct altera_tse_private *);
+void sgdma_enable_txirq(struct altera_tse_private *);
+void sgdma_enable_rxirq(struct altera_tse_private *);
+void sgdma_disable_rxirq(struct altera_tse_private *);
+void sgdma_disable_txirq(struct altera_tse_private *);
+void sgdma_clear_rxirq(struct altera_tse_private *);
+void sgdma_clear_txirq(struct altera_tse_private *);
+int sgdma_tx_buffer(struct altera_tse_private *priv, struct tse_buffer *);
+u32 sgdma_tx_completions(struct altera_tse_private *);
+int sgdma_add_rx_desc(struct altera_tse_private *priv, struct tse_buffer *);
+void sgdma_status(struct altera_tse_private *);
+u32 sgdma_rx_status(struct altera_tse_private *);
+int sgdma_initialize(struct altera_tse_private *);
+void sgdma_uninitialize(struct altera_tse_private *);
+
+#endif /*  __ALTERA_SGDMA_H__ */
diff --git a/drivers/net/ethernet/altera/altera_sgdmahw.h b/drivers/net/ethernet/altera/altera_sgdmahw.h
new file mode 100644
index 000000000000..ba3334f35383
--- /dev/null
+++ b/drivers/net/ethernet/altera/altera_sgdmahw.h
@@ -0,0 +1,124 @@
+/* Altera TSE SGDMA and MSGDMA Linux driver
+ * Copyright (C) 2014 Altera Corporation. All rights reserved
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __ALTERA_SGDMAHW_H__
+#define __ALTERA_SGDMAHW_H__
+
+/* SGDMA descriptor structure */
+struct sgdma_descrip {
+	unsigned int	raddr; /* address of data to be read */
+	unsigned int	pad1;
+	unsigned int	waddr;
+	unsigned int    pad2;
+	unsigned int	next;
+	unsigned int	pad3;
+	unsigned short  bytes;
+	unsigned char   rburst;
+	unsigned char	wburst;
+	unsigned short	bytes_xferred;	/* 16 bits, bytes xferred */
+
+	/* bit 0: error
+	 * bit 1: length error
+	 * bit 2: crc error
+	 * bit 3: truncated error
+	 * bit 4: phy error
+	 * bit 5: collision error
+	 * bit 6: reserved
+	 * bit 7: status eop for recv case
+	 */
+	unsigned char	status;
+
+	/* bit 0: eop
+	 * bit 1: read_fixed
+	 * bit 2: write fixed
+	 * bits 3,4,5,6: Channel (always 0)
+	 * bit 7: hardware owned
+	 */
+	unsigned char	control;
+} __packed;
+
+
+#define SGDMA_STATUS_ERR		BIT(0)
+#define SGDMA_STATUS_LENGTH_ERR		BIT(1)
+#define SGDMA_STATUS_CRC_ERR		BIT(2)
+#define SGDMA_STATUS_TRUNC_ERR		BIT(3)
+#define SGDMA_STATUS_PHY_ERR		BIT(4)
+#define SGDMA_STATUS_COLL_ERR		BIT(5)
+#define SGDMA_STATUS_EOP		BIT(7)
+
+#define SGDMA_CONTROL_EOP		BIT(0)
+#define SGDMA_CONTROL_RD_FIXED		BIT(1)
+#define SGDMA_CONTROL_WR_FIXED		BIT(2)
+
+/* Channel is always 0, so just zero initialize it */
+
+#define SGDMA_CONTROL_HW_OWNED		BIT(7)
+
+/* SGDMA register space */
+struct sgdma_csr {
+	/* bit 0: error
+	 * bit 1: eop
+	 * bit 2: descriptor completed
+	 * bit 3: chain completed
+	 * bit 4: busy
+	 * remainder reserved
+	 */
+	u32	status;
+	u32	pad1[3];
+
+	/* bit 0: interrupt on error
+	 * bit 1: interrupt on eop
+	 * bit 2: interrupt after every descriptor
+	 * bit 3: interrupt after last descrip in a chain
+	 * bit 4: global interrupt enable
+	 * bit 5: starts descriptor processing
+	 * bit 6: stop core on dma error
+	 * bit 7: interrupt on max descriptors
+	 * bits 8-15: max descriptors to generate interrupt
+	 * bit 16: Software reset
+	 * bit 17: clears owned by hardware if 0, does not clear otherwise
+	 * bit 18: enables descriptor polling mode
+	 * bit 19-26: clocks before polling again
+	 * bit 27-30: reserved
+	 * bit 31: clear interrupt
+	 */
+	u32	control;
+	u32	pad2[3];
+	u32	next_descrip;
+	u32	pad3[3];
+};
+
+
+#define SGDMA_STSREG_ERR	BIT(0) /* Error */
+#define SGDMA_STSREG_EOP	BIT(1) /* EOP */
+#define SGDMA_STSREG_DESCRIP	BIT(2) /* Descriptor completed */
+#define SGDMA_STSREG_CHAIN	BIT(3) /* Chain completed */
+#define SGDMA_STSREG_BUSY	BIT(4) /* Controller busy */
+
+#define SGDMA_CTRLREG_IOE	BIT(0) /* Interrupt on error */
+#define SGDMA_CTRLREG_IOEOP	BIT(1) /* Interrupt on EOP */
+#define SGDMA_CTRLREG_IDESCRIP	BIT(2) /* Interrupt after every descriptor */
+#define SGDMA_CTRLREG_ILASTD	BIT(3) /* Interrupt after last descriptor */
+#define SGDMA_CTRLREG_INTEN	BIT(4) /* Global Interrupt enable */
+#define SGDMA_CTRLREG_START	BIT(5) /* starts descriptor processing */
+#define SGDMA_CTRLREG_STOPERR	BIT(6) /* stop on dma error */
+#define SGDMA_CTRLREG_INTMAX	BIT(7) /* Interrupt on max descriptors */
+#define SGDMA_CTRLREG_RESET	BIT(16)/* Software reset */
+#define SGDMA_CTRLREG_COBHW	BIT(17)/* Clears owned by hardware */
+#define SGDMA_CTRLREG_POLL	BIT(18)/* enables descriptor polling mode */
+#define SGDMA_CTRLREG_CLRINT	BIT(31)/* Clears interrupt */
+
+#endif /* __ALTERA_SGDMAHW_H__ */
-- 
cgit v1.2.2


From 6c3324a96b4991d91c25d9fe6b52f5024e2cb8c5 Mon Sep 17 00:00:00 2001
From: Vince Bridgers <vbridgers2013@gmail.com>
Date: Mon, 17 Mar 2014 17:52:37 -0500
Subject: Altera TSE: Add Miscellaneous Files for Altera Ethernet Driver

This patch adds miscellaneous files for the Altera Ethernet Driver,
including ethtool support.

Signed-off-by: Vince Bridgers <vbridgers2013@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/altera/altera_tse_ethtool.c | 227 +++++++++++++++++++++++
 drivers/net/ethernet/altera/altera_utils.c       |  44 +++++
 drivers/net/ethernet/altera/altera_utils.h       |  27 +++
 3 files changed, 298 insertions(+)
 create mode 100644 drivers/net/ethernet/altera/altera_tse_ethtool.c
 create mode 100644 drivers/net/ethernet/altera/altera_utils.c
 create mode 100644 drivers/net/ethernet/altera/altera_utils.h

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/altera/altera_tse_ethtool.c b/drivers/net/ethernet/altera/altera_tse_ethtool.c
new file mode 100644
index 000000000000..63ac5f4960e4
--- /dev/null
+++ b/drivers/net/ethernet/altera/altera_tse_ethtool.c
@@ -0,0 +1,227 @@
+/* Ethtool support for Altera Triple-Speed Ethernet MAC driver
+ * Copyright (C) 2008-2014 Altera Corporation. All rights reserved
+ *
+ * Contributors:
+ *   Dalon Westergreen
+ *   Thomas Chou
+ *   Ian Abbott
+ *   Yuriy Kozlov
+ *   Tobias Klauser
+ *   Andriy Smolskyy
+ *   Roman Bulgakov
+ *   Dmytro Mytarchuk
+ *
+ * Original driver contributed by SLS.
+ * Major updates contributed by GlobalLogic
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/ethtool.h>
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/phy.h>
+
+#include "altera_tse.h"
+
+#define TSE_STATS_LEN	31
+#define TSE_NUM_REGS	128
+
+static char const stat_gstrings[][ETH_GSTRING_LEN] = {
+	"tx_packets",
+	"rx_packets",
+	"rx_crc_errors",
+	"rx_align_errors",
+	"tx_bytes",
+	"rx_bytes",
+	"tx_pause",
+	"rx_pause",
+	"rx_errors",
+	"tx_errors",
+	"rx_unicast",
+	"rx_multicast",
+	"rx_broadcast",
+	"tx_discards",
+	"tx_unicast",
+	"tx_multicast",
+	"tx_broadcast",
+	"ether_drops",
+	"rx_total_bytes",
+	"rx_total_packets",
+	"rx_undersize",
+	"rx_oversize",
+	"rx_64_bytes",
+	"rx_65_127_bytes",
+	"rx_128_255_bytes",
+	"rx_256_511_bytes",
+	"rx_512_1023_bytes",
+	"rx_1024_1518_bytes",
+	"rx_gte_1519_bytes",
+	"rx_jabbers",
+	"rx_runts",
+};
+
+static void tse_get_drvinfo(struct net_device *dev,
+			    struct ethtool_drvinfo *info)
+{
+	struct altera_tse_private *priv = netdev_priv(dev);
+	u32 rev = ioread32(&priv->mac_dev->megacore_revision);
+
+	strcpy(info->driver, "Altera TSE MAC IP Driver");
+	strcpy(info->version, "v8.0");
+	snprintf(info->fw_version, ETHTOOL_FWVERS_LEN, "v%d.%d",
+		 rev & 0xFFFF, (rev & 0xFFFF0000) >> 16);
+	sprintf(info->bus_info, "platform");
+}
+
+/* Fill in a buffer with the strings which correspond to the
+ * stats
+ */
+static void tse_gstrings(struct net_device *dev, u32 stringset, u8 *buf)
+{
+	memcpy(buf, stat_gstrings, TSE_STATS_LEN * ETH_GSTRING_LEN);
+}
+
+static void tse_fill_stats(struct net_device *dev, struct ethtool_stats *dummy,
+			   u64 *buf)
+{
+	struct altera_tse_private *priv = netdev_priv(dev);
+	struct altera_tse_mac *mac = priv->mac_dev;
+	u64 ext;
+
+	buf[0] = ioread32(&mac->frames_transmitted_ok);
+	buf[1] = ioread32(&mac->frames_received_ok);
+	buf[2] = ioread32(&mac->frames_check_sequence_errors);
+	buf[3] = ioread32(&mac->alignment_errors);
+
+	/* Extended aOctetsTransmittedOK counter */
+	ext = (u64) ioread32(&mac->msb_octets_transmitted_ok) << 32;
+	ext |= ioread32(&mac->octets_transmitted_ok);
+	buf[4] = ext;
+
+	/* Extended aOctetsReceivedOK counter */
+	ext = (u64) ioread32(&mac->msb_octets_received_ok) << 32;
+	ext |= ioread32(&mac->octets_received_ok);
+	buf[5] = ext;
+
+	buf[6] = ioread32(&mac->tx_pause_mac_ctrl_frames);
+	buf[7] = ioread32(&mac->rx_pause_mac_ctrl_frames);
+	buf[8] = ioread32(&mac->if_in_errors);
+	buf[9] = ioread32(&mac->if_out_errors);
+	buf[10] = ioread32(&mac->if_in_ucast_pkts);
+	buf[11] = ioread32(&mac->if_in_multicast_pkts);
+	buf[12] = ioread32(&mac->if_in_broadcast_pkts);
+	buf[13] = ioread32(&mac->if_out_discards);
+	buf[14] = ioread32(&mac->if_out_ucast_pkts);
+	buf[15] = ioread32(&mac->if_out_multicast_pkts);
+	buf[16] = ioread32(&mac->if_out_broadcast_pkts);
+	buf[17] = ioread32(&mac->ether_stats_drop_events);
+
+	/* Extended etherStatsOctets counter */
+	ext = (u64) ioread32(&mac->msb_ether_stats_octets) << 32;
+	ext |= ioread32(&mac->ether_stats_octets);
+	buf[18] = ext;
+
+	buf[19] = ioread32(&mac->ether_stats_pkts);
+	buf[20] = ioread32(&mac->ether_stats_undersize_pkts);
+	buf[21] = ioread32(&mac->ether_stats_oversize_pkts);
+	buf[22] = ioread32(&mac->ether_stats_pkts_64_octets);
+	buf[23] = ioread32(&mac->ether_stats_pkts_65to127_octets);
+	buf[24] = ioread32(&mac->ether_stats_pkts_128to255_octets);
+	buf[25] = ioread32(&mac->ether_stats_pkts_256to511_octets);
+	buf[26] = ioread32(&mac->ether_stats_pkts_512to1023_octets);
+	buf[27] = ioread32(&mac->ether_stats_pkts_1024to1518_octets);
+	buf[28] = ioread32(&mac->ether_stats_pkts_1519tox_octets);
+	buf[29] = ioread32(&mac->ether_stats_jabbers);
+	buf[30] = ioread32(&mac->ether_stats_fragments);
+}
+
+static int tse_sset_count(struct net_device *dev, int sset)
+{
+	switch (sset) {
+	case ETH_SS_STATS:
+		return TSE_STATS_LEN;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static u32 tse_get_msglevel(struct net_device *dev)
+{
+	struct altera_tse_private *priv = netdev_priv(dev);
+	return priv->msg_enable;
+}
+
+static void tse_set_msglevel(struct net_device *dev, uint32_t data)
+{
+	struct altera_tse_private *priv = netdev_priv(dev);
+	priv->msg_enable = data;
+}
+
+static int tse_reglen(struct net_device *dev)
+{
+	return TSE_NUM_REGS * sizeof(u32);
+}
+
+static void tse_get_regs(struct net_device *dev, struct ethtool_regs *regs,
+			 void *regbuf)
+{
+	int i;
+	struct altera_tse_private *priv = netdev_priv(dev);
+	u32 *tse_mac_regs = (u32 *)priv->mac_dev;
+	u32 *buf = regbuf;
+
+	for (i = 0; i < TSE_NUM_REGS; i++)
+		buf[i] = ioread32(&tse_mac_regs[i]);
+}
+
+static int tse_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct altera_tse_private *priv = netdev_priv(dev);
+	struct phy_device *phydev = priv->phydev;
+
+	if (phydev == NULL)
+		return -ENODEV;
+
+	return phy_ethtool_gset(phydev, cmd);
+}
+
+static int tse_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct altera_tse_private *priv = netdev_priv(dev);
+	struct phy_device *phydev = priv->phydev;
+
+	if (phydev == NULL)
+		return -ENODEV;
+
+	return phy_ethtool_sset(phydev, cmd);
+}
+
+static const struct ethtool_ops tse_ethtool_ops = {
+	.get_drvinfo = tse_get_drvinfo,
+	.get_regs_len = tse_reglen,
+	.get_regs = tse_get_regs,
+	.get_link = ethtool_op_get_link,
+	.get_settings = tse_get_settings,
+	.set_settings = tse_set_settings,
+	.get_strings = tse_gstrings,
+	.get_sset_count = tse_sset_count,
+	.get_ethtool_stats = tse_fill_stats,
+	.get_msglevel = tse_get_msglevel,
+	.set_msglevel = tse_set_msglevel,
+};
+
+void altera_tse_set_ethtool_ops(struct net_device *netdev)
+{
+	SET_ETHTOOL_OPS(netdev, &tse_ethtool_ops);
+}
diff --git a/drivers/net/ethernet/altera/altera_utils.c b/drivers/net/ethernet/altera/altera_utils.c
new file mode 100644
index 000000000000..70fa13f486b2
--- /dev/null
+++ b/drivers/net/ethernet/altera/altera_utils.c
@@ -0,0 +1,44 @@
+/* Altera TSE SGDMA and MSGDMA Linux driver
+ * Copyright (C) 2014 Altera Corporation. All rights reserved
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "altera_tse.h"
+#include "altera_utils.h"
+
+void tse_set_bit(void __iomem *ioaddr, u32 bit_mask)
+{
+	u32 value = ioread32(ioaddr);
+	value |= bit_mask;
+	iowrite32(value, ioaddr);
+}
+
+void tse_clear_bit(void __iomem *ioaddr, u32 bit_mask)
+{
+	u32 value = ioread32(ioaddr);
+	value &= ~bit_mask;
+	iowrite32(value, ioaddr);
+}
+
+int tse_bit_is_set(void __iomem *ioaddr, u32 bit_mask)
+{
+	u32 value = ioread32(ioaddr);
+	return (value & bit_mask) ? 1 : 0;
+}
+
+int tse_bit_is_clear(void __iomem *ioaddr, u32 bit_mask)
+{
+	u32 value = ioread32(ioaddr);
+	return (value & bit_mask) ? 0 : 1;
+}
diff --git a/drivers/net/ethernet/altera/altera_utils.h b/drivers/net/ethernet/altera/altera_utils.h
new file mode 100644
index 000000000000..ce1db36d3583
--- /dev/null
+++ b/drivers/net/ethernet/altera/altera_utils.h
@@ -0,0 +1,27 @@
+/* Altera TSE SGDMA and MSGDMA Linux driver
+ * Copyright (C) 2014 Altera Corporation. All rights reserved
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/kernel.h>
+
+#ifndef __ALTERA_UTILS_H__
+#define __ALTERA_UTILS_H__
+
+void tse_set_bit(void __iomem *ioaddr, u32 bit_mask);
+void tse_clear_bit(void __iomem *ioaddr, u32 bit_mask);
+int tse_bit_is_set(void __iomem *ioaddr, u32 bit_mask);
+int tse_bit_is_clear(void __iomem *ioaddr, u32 bit_mask);
+
+#endif /* __ALTERA_UTILS_H__*/
-- 
cgit v1.2.2


From bbd2190ce96d8fce031f0526c1f970b68adc9d1a Mon Sep 17 00:00:00 2001
From: Vince Bridgers <vbridgers2013@gmail.com>
Date: Mon, 17 Mar 2014 17:52:38 -0500
Subject: Altera TSE: Add main and header file for Altera Ethernet Driver

This patch adds the main driver and header file for the Altera Triple
Speed Ethernet driver.

Signed-off-by: Vince Bridgers <vbridgers2013@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/altera/altera_tse.h      |  486 ++++++++
 drivers/net/ethernet/altera/altera_tse_main.c | 1543 +++++++++++++++++++++++++
 2 files changed, 2029 insertions(+)
 create mode 100644 drivers/net/ethernet/altera/altera_tse.h
 create mode 100644 drivers/net/ethernet/altera/altera_tse_main.c

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/altera/altera_tse.h b/drivers/net/ethernet/altera/altera_tse.h
new file mode 100644
index 000000000000..8feeed05de0e
--- /dev/null
+++ b/drivers/net/ethernet/altera/altera_tse.h
@@ -0,0 +1,486 @@
+/* Altera Triple-Speed Ethernet MAC driver
+ * Copyright (C) 2008-2014 Altera Corporation. All rights reserved
+ *
+ * Contributors:
+ *   Dalon Westergreen
+ *   Thomas Chou
+ *   Ian Abbott
+ *   Yuriy Kozlov
+ *   Tobias Klauser
+ *   Andriy Smolskyy
+ *   Roman Bulgakov
+ *   Dmytro Mytarchuk
+ *   Matthew Gerlach
+ *
+ * Original driver contributed by SLS.
+ * Major updates contributed by GlobalLogic
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __ALTERA_TSE_H__
+#define __ALTERA_TSE_H__
+
+#define ALTERA_TSE_RESOURCE_NAME	"altera_tse"
+
+#include <linux/bitops.h>
+#include <linux/if_vlan.h>
+#include <linux/list.h>
+#include <linux/netdevice.h>
+#include <linux/phy.h>
+
+#define ALTERA_TSE_SW_RESET_WATCHDOG_CNTR	10000
+#define ALTERA_TSE_MAC_FIFO_WIDTH		4	/* TX/RX FIFO width in
+							 * bytes
+							 */
+/* Rx FIFO default settings */
+#define ALTERA_TSE_RX_SECTION_EMPTY	16
+#define ALTERA_TSE_RX_SECTION_FULL	0
+#define ALTERA_TSE_RX_ALMOST_EMPTY	8
+#define ALTERA_TSE_RX_ALMOST_FULL	8
+
+/* Tx FIFO default settings */
+#define ALTERA_TSE_TX_SECTION_EMPTY	16
+#define ALTERA_TSE_TX_SECTION_FULL	0
+#define ALTERA_TSE_TX_ALMOST_EMPTY	8
+#define ALTERA_TSE_TX_ALMOST_FULL	3
+
+/* MAC function configuration default settings */
+#define ALTERA_TSE_TX_IPG_LENGTH	12
+
+#define GET_BIT_VALUE(v, bit)		(((v) >> (bit)) & 0x1)
+
+/* MAC Command_Config Register Bit Definitions
+ */
+#define MAC_CMDCFG_TX_ENA			BIT(0)
+#define MAC_CMDCFG_RX_ENA			BIT(1)
+#define MAC_CMDCFG_XON_GEN			BIT(2)
+#define MAC_CMDCFG_ETH_SPEED			BIT(3)
+#define MAC_CMDCFG_PROMIS_EN			BIT(4)
+#define MAC_CMDCFG_PAD_EN			BIT(5)
+#define MAC_CMDCFG_CRC_FWD			BIT(6)
+#define MAC_CMDCFG_PAUSE_FWD			BIT(7)
+#define MAC_CMDCFG_PAUSE_IGNORE			BIT(8)
+#define MAC_CMDCFG_TX_ADDR_INS			BIT(9)
+#define MAC_CMDCFG_HD_ENA			BIT(10)
+#define MAC_CMDCFG_EXCESS_COL			BIT(11)
+#define MAC_CMDCFG_LATE_COL			BIT(12)
+#define MAC_CMDCFG_SW_RESET			BIT(13)
+#define MAC_CMDCFG_MHASH_SEL			BIT(14)
+#define MAC_CMDCFG_LOOP_ENA			BIT(15)
+#define MAC_CMDCFG_TX_ADDR_SEL(v)		(((v) & 0x7) << 16)
+#define MAC_CMDCFG_MAGIC_ENA			BIT(19)
+#define MAC_CMDCFG_SLEEP			BIT(20)
+#define MAC_CMDCFG_WAKEUP			BIT(21)
+#define MAC_CMDCFG_XOFF_GEN			BIT(22)
+#define MAC_CMDCFG_CNTL_FRM_ENA			BIT(23)
+#define MAC_CMDCFG_NO_LGTH_CHECK		BIT(24)
+#define MAC_CMDCFG_ENA_10			BIT(25)
+#define MAC_CMDCFG_RX_ERR_DISC			BIT(26)
+#define MAC_CMDCFG_DISABLE_READ_TIMEOUT		BIT(27)
+#define MAC_CMDCFG_CNT_RESET			BIT(31)
+
+#define MAC_CMDCFG_TX_ENA_GET(v)		GET_BIT_VALUE(v, 0)
+#define MAC_CMDCFG_RX_ENA_GET(v)		GET_BIT_VALUE(v, 1)
+#define MAC_CMDCFG_XON_GEN_GET(v)		GET_BIT_VALUE(v, 2)
+#define MAC_CMDCFG_ETH_SPEED_GET(v)		GET_BIT_VALUE(v, 3)
+#define MAC_CMDCFG_PROMIS_EN_GET(v)		GET_BIT_VALUE(v, 4)
+#define MAC_CMDCFG_PAD_EN_GET(v)		GET_BIT_VALUE(v, 5)
+#define MAC_CMDCFG_CRC_FWD_GET(v)		GET_BIT_VALUE(v, 6)
+#define MAC_CMDCFG_PAUSE_FWD_GET(v)		GET_BIT_VALUE(v, 7)
+#define MAC_CMDCFG_PAUSE_IGNORE_GET(v)		GET_BIT_VALUE(v, 8)
+#define MAC_CMDCFG_TX_ADDR_INS_GET(v)		GET_BIT_VALUE(v, 9)
+#define MAC_CMDCFG_HD_ENA_GET(v)		GET_BIT_VALUE(v, 10)
+#define MAC_CMDCFG_EXCESS_COL_GET(v)		GET_BIT_VALUE(v, 11)
+#define MAC_CMDCFG_LATE_COL_GET(v)		GET_BIT_VALUE(v, 12)
+#define MAC_CMDCFG_SW_RESET_GET(v)		GET_BIT_VALUE(v, 13)
+#define MAC_CMDCFG_MHASH_SEL_GET(v)		GET_BIT_VALUE(v, 14)
+#define MAC_CMDCFG_LOOP_ENA_GET(v)		GET_BIT_VALUE(v, 15)
+#define MAC_CMDCFG_TX_ADDR_SEL_GET(v)		(((v) >> 16) & 0x7)
+#define MAC_CMDCFG_MAGIC_ENA_GET(v)		GET_BIT_VALUE(v, 19)
+#define MAC_CMDCFG_SLEEP_GET(v)			GET_BIT_VALUE(v, 20)
+#define MAC_CMDCFG_WAKEUP_GET(v)		GET_BIT_VALUE(v, 21)
+#define MAC_CMDCFG_XOFF_GEN_GET(v)		GET_BIT_VALUE(v, 22)
+#define MAC_CMDCFG_CNTL_FRM_ENA_GET(v)		GET_BIT_VALUE(v, 23)
+#define MAC_CMDCFG_NO_LGTH_CHECK_GET(v)		GET_BIT_VALUE(v, 24)
+#define MAC_CMDCFG_ENA_10_GET(v)		GET_BIT_VALUE(v, 25)
+#define MAC_CMDCFG_RX_ERR_DISC_GET(v)		GET_BIT_VALUE(v, 26)
+#define MAC_CMDCFG_DISABLE_READ_TIMEOUT_GET(v)	GET_BIT_VALUE(v, 27)
+#define MAC_CMDCFG_CNT_RESET_GET(v)		GET_BIT_VALUE(v, 31)
+
+/* MDIO registers within MAC register Space
+ */
+struct altera_tse_mdio {
+	u32 control;	/* PHY device operation control register */
+	u32 status;	/* PHY device operation status register */
+	u32 phy_id1;	/* Bits 31:16 of PHY identifier */
+	u32 phy_id2;	/* Bits 15:0 of PHY identifier */
+	u32 auto_negotiation_advertisement;	/* Auto-negotiation
+							 * advertisement
+							 * register
+							 */
+	u32 remote_partner_base_page_ability;
+
+	u32 reg6;
+	u32 reg7;
+	u32 reg8;
+	u32 reg9;
+	u32 rega;
+	u32 regb;
+	u32 regc;
+	u32 regd;
+	u32 rege;
+	u32 regf;
+	u32 reg10;
+	u32 reg11;
+	u32 reg12;
+	u32 reg13;
+	u32 reg14;
+	u32 reg15;
+	u32 reg16;
+	u32 reg17;
+	u32 reg18;
+	u32 reg19;
+	u32 reg1a;
+	u32 reg1b;
+	u32 reg1c;
+	u32 reg1d;
+	u32 reg1e;
+	u32 reg1f;
+};
+
+/* MAC register Space. Note that some of these registers may or may not be
+ * present depending upon options chosen by the user when the core was
+ * configured and built. Please consult the Altera Triple Speed Ethernet User
+ * Guide for details.
+ */
+struct altera_tse_mac {
+	/* Bits 15:0: MegaCore function revision (0x0800). Bit 31:16: Customer
+	 * specific revision
+	 */
+	u32 megacore_revision;
+	/* Provides a memory location for user applications to test the device
+	 * memory operation.
+	 */
+	u32 scratch_pad;
+	/* The host processor uses this register to control and configure the
+	 * MAC block
+	 */
+	u32 command_config;
+	/* 32-bit primary MAC address word 0 bits 0 to 31 of the primary
+	 * MAC address
+	 */
+	u32 mac_addr_0;
+	/* 32-bit primary MAC address word 1 bits 32 to 47 of the primary
+	 * MAC address
+	 */
+	u32 mac_addr_1;
+	/* 14-bit maximum frame length. The MAC receive logic */
+	u32 frm_length;
+	/* The pause quanta is used in each pause frame sent to a remote
+	 * Ethernet device, in increments of 512 Ethernet bit times
+	 */
+	u32 pause_quanta;
+	/* 12-bit receive FIFO section-empty threshold */
+	u32 rx_section_empty;
+	/* 12-bit receive FIFO section-full threshold */
+	u32 rx_section_full;
+	/* 12-bit transmit FIFO section-empty threshold */
+	u32 tx_section_empty;
+	/* 12-bit transmit FIFO section-full threshold */
+	u32 tx_section_full;
+	/* 12-bit receive FIFO almost-empty threshold */
+	u32 rx_almost_empty;
+	/* 12-bit receive FIFO almost-full threshold */
+	u32 rx_almost_full;
+	/* 12-bit transmit FIFO almost-empty threshold */
+	u32 tx_almost_empty;
+	/* 12-bit transmit FIFO almost-full threshold */
+	u32 tx_almost_full;
+	/* MDIO address of PHY Device 0. Bits 0 to 4 hold a 5-bit PHY address */
+	u32 mdio_phy0_addr;
+	/* MDIO address of PHY Device 1. Bits 0 to 4 hold a 5-bit PHY address */
+	u32 mdio_phy1_addr;
+
+	/* Bit[15:0]—16-bit holdoff quanta */
+	u32 holdoff_quant;
+
+	/* only if 100/1000 BaseX PCS, reserved otherwise */
+	u32 reserved1[5];
+
+	/* Minimum IPG between consecutive transmit frame in terms of bytes */
+	u32 tx_ipg_length;
+
+	/* IEEE 802.3 oEntity Managed Object Support */
+
+	/* The MAC addresses */
+	u32 mac_id_1;
+	u32 mac_id_2;
+
+	/* Number of frames transmitted without error including pause frames */
+	u32 frames_transmitted_ok;
+	/* Number of frames received without error including pause frames */
+	u32 frames_received_ok;
+	/* Number of frames received with a CRC error */
+	u32 frames_check_sequence_errors;
+	/* Frame received with an alignment error */
+	u32 alignment_errors;
+	/* Sum of payload and padding octets of frames transmitted without
+	 * error
+	 */
+	u32 octets_transmitted_ok;
+	/* Sum of payload and padding octets of frames received without error */
+	u32 octets_received_ok;
+
+	/* IEEE 802.3 oPausedEntity Managed Object Support */
+
+	/* Number of transmitted pause frames */
+	u32 tx_pause_mac_ctrl_frames;
+	/* Number of Received pause frames */
+	u32 rx_pause_mac_ctrl_frames;
+
+	/* IETF MIB (MIB-II) Object Support */
+
+	/* Number of frames received with error */
+	u32 if_in_errors;
+	/* Number of frames transmitted with error */
+	u32 if_out_errors;
+	/* Number of valid received unicast frames */
+	u32 if_in_ucast_pkts;
+	/* Number of valid received multicasts frames (without pause) */
+	u32 if_in_multicast_pkts;
+	/* Number of valid received broadcast frames */
+	u32 if_in_broadcast_pkts;
+	u32 if_out_discards;
+	/* The number of valid unicast frames transmitted */
+	u32 if_out_ucast_pkts;
+	/* The number of valid multicast frames transmitted,
+	 * excluding pause frames
+	 */
+	u32 if_out_multicast_pkts;
+	u32 if_out_broadcast_pkts;
+
+	/* IETF RMON MIB Object Support */
+
+	/* Counts the number of dropped packets due to internal errors
+	 * of the MAC client.
+	 */
+	u32 ether_stats_drop_events;
+	/* Total number of bytes received. Good and bad frames. */
+	u32 ether_stats_octets;
+	/* Total number of packets received. Counts good and bad packets. */
+	u32 ether_stats_pkts;
+	/* Number of packets received with less than 64 bytes. */
+	u32 ether_stats_undersize_pkts;
+	/* The number of frames received that are longer than the
+	 * value configured in the frm_length register
+	 */
+	u32 ether_stats_oversize_pkts;
+	/* Number of received packet with 64 bytes */
+	u32 ether_stats_pkts_64_octets;
+	/* Frames (good and bad) with 65 to 127 bytes */
+	u32 ether_stats_pkts_65to127_octets;
+	/* Frames (good and bad) with 128 to 255 bytes */
+	u32 ether_stats_pkts_128to255_octets;
+	/* Frames (good and bad) with 256 to 511 bytes */
+	u32 ether_stats_pkts_256to511_octets;
+	/* Frames (good and bad) with 512 to 1023 bytes */
+	u32 ether_stats_pkts_512to1023_octets;
+	/* Frames (good and bad) with 1024 to 1518 bytes */
+	u32 ether_stats_pkts_1024to1518_octets;
+
+	/* Any frame length from 1519 to the maximum length configured in the
+	 * frm_length register, if it is greater than 1518
+	 */
+	u32 ether_stats_pkts_1519tox_octets;
+	/* Too long frames with CRC error */
+	u32 ether_stats_jabbers;
+	/* Too short frames with CRC error */
+	u32 ether_stats_fragments;
+
+	u32 reserved2;
+
+	/* FIFO control register */
+	u32 tx_cmd_stat;
+	u32 rx_cmd_stat;
+
+	/* Extended Statistics Counters */
+	u32 msb_octets_transmitted_ok;
+	u32 msb_octets_received_ok;
+	u32 msb_ether_stats_octets;
+
+	u32 reserved3;
+
+	/* Multicast address resolution table, mapped in the controller address
+	 * space
+	 */
+	u32 hash_table[64];
+
+	/* Registers 0 to 31 within PHY device 0/1 connected to the MDIO PHY
+	 * management interface
+	 */
+	struct altera_tse_mdio mdio_phy0;
+	struct altera_tse_mdio mdio_phy1;
+
+	/* 4 Supplemental MAC Addresses */
+	u32 supp_mac_addr_0_0;
+	u32 supp_mac_addr_0_1;
+	u32 supp_mac_addr_1_0;
+	u32 supp_mac_addr_1_1;
+	u32 supp_mac_addr_2_0;
+	u32 supp_mac_addr_2_1;
+	u32 supp_mac_addr_3_0;
+	u32 supp_mac_addr_3_1;
+
+	u32 reserved4[8];
+
+	/* IEEE 1588v2 Feature */
+	u32 tx_period;
+	u32 tx_adjust_fns;
+	u32 tx_adjust_ns;
+	u32 rx_period;
+	u32 rx_adjust_fns;
+	u32 rx_adjust_ns;
+
+	u32 reserved5[42];
+};
+
+/* Transmit and Receive Command Registers Bit Definitions
+ */
+#define ALTERA_TSE_TX_CMD_STAT_OMIT_CRC		BIT(17)
+#define ALTERA_TSE_TX_CMD_STAT_TX_SHIFT16	BIT(18)
+#define ALTERA_TSE_RX_CMD_STAT_RX_SHIFT16	BIT(25)
+
+/* Wrapper around a pointer to a socket buffer,
+ * so a DMA handle can be stored along with the buffer
+ */
+struct tse_buffer {
+	struct list_head lh;
+	struct sk_buff *skb;
+	dma_addr_t dma_addr;
+	u32 len;
+	int mapped_as_page;
+};
+
+struct altera_tse_private;
+
+#define ALTERA_DTYPE_SGDMA 1
+#define ALTERA_DTYPE_MSGDMA 2
+
+/* standard DMA interface for SGDMA and MSGDMA */
+struct altera_dmaops {
+	int altera_dtype;
+	int dmamask;
+	void (*reset_dma)(struct altera_tse_private *);
+	void (*enable_txirq)(struct altera_tse_private *);
+	void (*enable_rxirq)(struct altera_tse_private *);
+	void (*disable_txirq)(struct altera_tse_private *);
+	void (*disable_rxirq)(struct altera_tse_private *);
+	void (*clear_txirq)(struct altera_tse_private *);
+	void (*clear_rxirq)(struct altera_tse_private *);
+	int (*tx_buffer)(struct altera_tse_private *, struct tse_buffer *);
+	u32 (*tx_completions)(struct altera_tse_private *);
+	int (*add_rx_desc)(struct altera_tse_private *, struct tse_buffer *);
+	u32 (*get_rx_status)(struct altera_tse_private *);
+	int (*init_dma)(struct altera_tse_private *);
+	void (*uninit_dma)(struct altera_tse_private *);
+};
+
+/* This structure is private to each device.
+ */
+struct altera_tse_private {
+	struct net_device *dev;
+	struct device *device;
+	struct napi_struct napi;
+
+	/* MAC address space */
+	struct altera_tse_mac __iomem *mac_dev;
+
+	/* TSE Revision */
+	u32	revision;
+
+	/* mSGDMA Rx Dispatcher address space */
+	void __iomem *rx_dma_csr;
+	void __iomem *rx_dma_desc;
+	void __iomem *rx_dma_resp;
+
+	/* mSGDMA Tx Dispatcher address space */
+	void __iomem *tx_dma_csr;
+	void __iomem *tx_dma_desc;
+
+	/* Rx buffers queue */
+	struct tse_buffer *rx_ring;
+	u32 rx_cons;
+	u32 rx_prod;
+	u32 rx_ring_size;
+	u32 rx_dma_buf_sz;
+
+	/* Tx ring buffer */
+	struct tse_buffer *tx_ring;
+	u32 tx_prod;
+	u32 tx_cons;
+	u32 tx_ring_size;
+
+	/* Interrupts */
+	u32 tx_irq;
+	u32 rx_irq;
+
+	/* RX/TX MAC FIFO configs */
+	u32 tx_fifo_depth;
+	u32 rx_fifo_depth;
+	u32 max_mtu;
+
+	/* Hash filter settings */
+	u32 hash_filter;
+	u32 added_unicast;
+
+	/* Descriptor memory info for managing SGDMA */
+	u32 txdescmem;
+	u32 rxdescmem;
+	dma_addr_t rxdescmem_busaddr;
+	dma_addr_t txdescmem_busaddr;
+	u32 txctrlreg;
+	u32 rxctrlreg;
+	dma_addr_t rxdescphys;
+	dma_addr_t txdescphys;
+
+	struct list_head txlisthd;
+	struct list_head rxlisthd;
+
+	/* MAC command_config register protection */
+	spinlock_t mac_cfg_lock;
+	/* Tx path protection */
+	spinlock_t tx_lock;
+	/* Rx DMA & interrupt control protection */
+	spinlock_t rxdma_irq_lock;
+
+	/* PHY */
+	int phy_addr;		/* PHY's MDIO address, -1 for autodetection */
+	phy_interface_t phy_iface;
+	struct mii_bus *mdio;
+	struct phy_device *phydev;
+	int oldspeed;
+	int oldduplex;
+	int oldlink;
+
+	/* ethtool msglvl option */
+	u32 msg_enable;
+
+	struct altera_dmaops *dmaops;
+};
+
+/* Function prototypes
+ */
+void altera_tse_set_ethtool_ops(struct net_device *);
+
+#endif /* __ALTERA_TSE_H__ */
diff --git a/drivers/net/ethernet/altera/altera_tse_main.c b/drivers/net/ethernet/altera/altera_tse_main.c
new file mode 100644
index 000000000000..6006ef275107
--- /dev/null
+++ b/drivers/net/ethernet/altera/altera_tse_main.c
@@ -0,0 +1,1543 @@
+/* Altera Triple-Speed Ethernet MAC driver
+ * Copyright (C) 2008-2014 Altera Corporation. All rights reserved
+ *
+ * Contributors:
+ *   Dalon Westergreen
+ *   Thomas Chou
+ *   Ian Abbott
+ *   Yuriy Kozlov
+ *   Tobias Klauser
+ *   Andriy Smolskyy
+ *   Roman Bulgakov
+ *   Dmytro Mytarchuk
+ *   Matthew Gerlach
+ *
+ * Original driver contributed by SLS.
+ * Major updates contributed by GlobalLogic
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/atomic.h>
+#include <linux/delay.h>
+#include <linux/etherdevice.h>
+#include <linux/if_vlan.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/of_device.h>
+#include <linux/of_mdio.h>
+#include <linux/of_net.h>
+#include <linux/of_platform.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <linux/skbuff.h>
+#include <asm/cacheflush.h>
+
+#include "altera_utils.h"
+#include "altera_tse.h"
+#include "altera_sgdma.h"
+#include "altera_msgdma.h"
+
+static atomic_t instance_count = ATOMIC_INIT(~0);
+/* Module parameters */
+static int debug = -1;
+module_param(debug, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Message Level (-1: default, 0: no output, 16: all)");
+
+static const u32 default_msg_level = (NETIF_MSG_DRV | NETIF_MSG_PROBE |
+					NETIF_MSG_LINK | NETIF_MSG_IFUP |
+					NETIF_MSG_IFDOWN);
+
+#define RX_DESCRIPTORS 64
+static int dma_rx_num = RX_DESCRIPTORS;
+module_param(dma_rx_num, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(dma_rx_num, "Number of descriptors in the RX list");
+
+#define TX_DESCRIPTORS 64
+static int dma_tx_num = TX_DESCRIPTORS;
+module_param(dma_tx_num, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(dma_tx_num, "Number of descriptors in the TX list");
+
+
+#define POLL_PHY (-1)
+
+/* Make sure DMA buffer size is larger than the max frame size
+ * plus some alignment offset and a VLAN header. If the max frame size is
+ * 1518, a VLAN header would be additional 4 bytes and additional
+ * headroom for alignment is 2 bytes, 2048 is just fine.
+ */
+#define ALTERA_RXDMABUFFER_SIZE	2048
+
+/* Allow network stack to resume queueing packets after we've
+ * finished transmitting at least 1/4 of the packets in the queue.
+ */
+#define TSE_TX_THRESH(x)	(x->tx_ring_size / 4)
+
+#define TXQUEUESTOP_THRESHHOLD	2
+
+static struct of_device_id altera_tse_ids[];
+
+static inline u32 tse_tx_avail(struct altera_tse_private *priv)
+{
+	return priv->tx_cons + priv->tx_ring_size - priv->tx_prod - 1;
+}
+
+/* MDIO specific functions
+ */
+static int altera_tse_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
+{
+	struct altera_tse_mac *mac = (struct altera_tse_mac *)bus->priv;
+	unsigned int *mdio_regs = (unsigned int *)&mac->mdio_phy0;
+	u32 data;
+
+	/* set MDIO address */
+	iowrite32((mii_id & 0x1f), &mac->mdio_phy0_addr);
+
+	/* get the data */
+	data = ioread32(&mdio_regs[regnum]) & 0xffff;
+	return data;
+}
+
+static int altera_tse_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
+				 u16 value)
+{
+	struct altera_tse_mac *mac = (struct altera_tse_mac *)bus->priv;
+	unsigned int *mdio_regs = (unsigned int *)&mac->mdio_phy0;
+
+	/* set MDIO address */
+	iowrite32((mii_id & 0x1f), &mac->mdio_phy0_addr);
+
+	/* write the data */
+	iowrite32((u32) value, &mdio_regs[regnum]);
+	return 0;
+}
+
+static int altera_tse_mdio_create(struct net_device *dev, unsigned int id)
+{
+	struct altera_tse_private *priv = netdev_priv(dev);
+	int ret;
+	int i;
+	struct device_node *mdio_node = NULL;
+	struct mii_bus *mdio = NULL;
+	struct device_node *child_node = NULL;
+
+	for_each_child_of_node(priv->device->of_node, child_node) {
+		if (of_device_is_compatible(child_node, "altr,tse-mdio")) {
+			mdio_node = child_node;
+			break;
+		}
+	}
+
+	if (mdio_node) {
+		netdev_dbg(dev, "FOUND MDIO subnode\n");
+	} else {
+		netdev_dbg(dev, "NO MDIO subnode\n");
+		return 0;
+	}
+
+	mdio = mdiobus_alloc();
+	if (mdio == NULL) {
+		netdev_err(dev, "Error allocating MDIO bus\n");
+		return -ENOMEM;
+	}
+
+	mdio->name = ALTERA_TSE_RESOURCE_NAME;
+	mdio->read = &altera_tse_mdio_read;
+	mdio->write = &altera_tse_mdio_write;
+	snprintf(mdio->id, MII_BUS_ID_SIZE, "%s-%u", mdio->name, id);
+
+	mdio->irq = kcalloc(PHY_MAX_ADDR, sizeof(int), GFP_KERNEL);
+	if (mdio->irq == NULL) {
+		ret = -ENOMEM;
+		goto out_free_mdio;
+	}
+	for (i = 0; i < PHY_MAX_ADDR; i++)
+		mdio->irq[i] = PHY_POLL;
+
+	mdio->priv = priv->mac_dev;
+	mdio->parent = priv->device;
+
+	ret = of_mdiobus_register(mdio, mdio_node);
+	if (ret != 0) {
+		netdev_err(dev, "Cannot register MDIO bus %s\n",
+			   mdio->id);
+		goto out_free_mdio_irq;
+	}
+
+	if (netif_msg_drv(priv))
+		netdev_info(dev, "MDIO bus %s: created\n", mdio->id);
+
+	priv->mdio = mdio;
+	return 0;
+out_free_mdio_irq:
+	kfree(mdio->irq);
+out_free_mdio:
+	mdiobus_free(mdio);
+	mdio = NULL;
+	return ret;
+}
+
+static void altera_tse_mdio_destroy(struct net_device *dev)
+{
+	struct altera_tse_private *priv = netdev_priv(dev);
+
+	if (priv->mdio == NULL)
+		return;
+
+	if (netif_msg_drv(priv))
+		netdev_info(dev, "MDIO bus %s: removed\n",
+			    priv->mdio->id);
+
+	mdiobus_unregister(priv->mdio);
+	kfree(priv->mdio->irq);
+	mdiobus_free(priv->mdio);
+	priv->mdio = NULL;
+}
+
+static int tse_init_rx_buffer(struct altera_tse_private *priv,
+			      struct tse_buffer *rxbuffer, int len)
+{
+	rxbuffer->skb = netdev_alloc_skb_ip_align(priv->dev, len);
+	if (!rxbuffer->skb)
+		return -ENOMEM;
+
+	rxbuffer->dma_addr = dma_map_single(priv->device, rxbuffer->skb->data,
+						len,
+						DMA_FROM_DEVICE);
+
+	if (dma_mapping_error(priv->device, rxbuffer->dma_addr)) {
+		netdev_err(priv->dev, "%s: DMA mapping error\n", __func__);
+		dev_kfree_skb_any(rxbuffer->skb);
+		return -EINVAL;
+	}
+	rxbuffer->len = len;
+	return 0;
+}
+
+static void tse_free_rx_buffer(struct altera_tse_private *priv,
+			       struct tse_buffer *rxbuffer)
+{
+	struct sk_buff *skb = rxbuffer->skb;
+	dma_addr_t dma_addr = rxbuffer->dma_addr;
+
+	if (skb != NULL) {
+		if (dma_addr)
+			dma_unmap_single(priv->device, dma_addr,
+					 rxbuffer->len,
+					 DMA_FROM_DEVICE);
+		dev_kfree_skb_any(skb);
+		rxbuffer->skb = NULL;
+		rxbuffer->dma_addr = 0;
+	}
+}
+
+/* Unmap and free Tx buffer resources
+ */
+static void tse_free_tx_buffer(struct altera_tse_private *priv,
+			       struct tse_buffer *buffer)
+{
+	if (buffer->dma_addr) {
+		if (buffer->mapped_as_page)
+			dma_unmap_page(priv->device, buffer->dma_addr,
+				       buffer->len, DMA_TO_DEVICE);
+		else
+			dma_unmap_single(priv->device, buffer->dma_addr,
+					 buffer->len, DMA_TO_DEVICE);
+		buffer->dma_addr = 0;
+	}
+	if (buffer->skb) {
+		dev_kfree_skb_any(buffer->skb);
+		buffer->skb = NULL;
+	}
+}
+
+static int alloc_init_skbufs(struct altera_tse_private *priv)
+{
+	unsigned int rx_descs = priv->rx_ring_size;
+	unsigned int tx_descs = priv->tx_ring_size;
+	int ret = -ENOMEM;
+	int i;
+
+	/* Create Rx ring buffer */
+	priv->rx_ring = kcalloc(rx_descs, sizeof(struct tse_buffer),
+				GFP_KERNEL);
+	if (!priv->rx_ring)
+		goto err_rx_ring;
+
+	/* Create Tx ring buffer */
+	priv->tx_ring = kcalloc(tx_descs, sizeof(struct tse_buffer),
+				GFP_KERNEL);
+	if (!priv->tx_ring)
+		goto err_tx_ring;
+
+	priv->tx_cons = 0;
+	priv->tx_prod = 0;
+
+	/* Init Rx ring */
+	for (i = 0; i < rx_descs; i++) {
+		ret = tse_init_rx_buffer(priv, &priv->rx_ring[i],
+					 priv->rx_dma_buf_sz);
+		if (ret)
+			goto err_init_rx_buffers;
+	}
+
+	priv->rx_cons = 0;
+	priv->rx_prod = 0;
+
+	return 0;
+err_init_rx_buffers:
+	while (--i >= 0)
+		tse_free_rx_buffer(priv, &priv->rx_ring[i]);
+	kfree(priv->tx_ring);
+err_tx_ring:
+	kfree(priv->rx_ring);
+err_rx_ring:
+	return ret;
+}
+
+static void free_skbufs(struct net_device *dev)
+{
+	struct altera_tse_private *priv = netdev_priv(dev);
+	unsigned int rx_descs = priv->rx_ring_size;
+	unsigned int tx_descs = priv->tx_ring_size;
+	int i;
+
+	/* Release the DMA TX/RX socket buffers */
+	for (i = 0; i < rx_descs; i++)
+		tse_free_rx_buffer(priv, &priv->rx_ring[i]);
+	for (i = 0; i < tx_descs; i++)
+		tse_free_tx_buffer(priv, &priv->tx_ring[i]);
+
+
+	kfree(priv->tx_ring);
+}
+
+/* Reallocate the skb for the reception process
+ */
+static inline void tse_rx_refill(struct altera_tse_private *priv)
+{
+	unsigned int rxsize = priv->rx_ring_size;
+	unsigned int entry;
+	int ret;
+
+	for (; priv->rx_cons - priv->rx_prod > 0;
+			priv->rx_prod++) {
+		entry = priv->rx_prod % rxsize;
+		if (likely(priv->rx_ring[entry].skb == NULL)) {
+			ret = tse_init_rx_buffer(priv, &priv->rx_ring[entry],
+				priv->rx_dma_buf_sz);
+			if (unlikely(ret != 0))
+				break;
+			priv->dmaops->add_rx_desc(priv, &priv->rx_ring[entry]);
+		}
+	}
+}
+
+/* Pull out the VLAN tag and fix up the packet
+ */
+static inline void tse_rx_vlan(struct net_device *dev, struct sk_buff *skb)
+{
+	struct ethhdr *eth_hdr;
+	u16 vid;
+	if ((dev->features & NETIF_F_HW_VLAN_CTAG_RX) &&
+	    !__vlan_get_tag(skb, &vid)) {
+		eth_hdr = (struct ethhdr *)skb->data;
+		memmove(skb->data + VLAN_HLEN, eth_hdr, ETH_ALEN * 2);
+		skb_pull(skb, VLAN_HLEN);
+		__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vid);
+	}
+}
+
+/* Receive a packet: retrieve and pass over to upper levels
+ */
+static int tse_rx(struct altera_tse_private *priv, int limit)
+{
+	unsigned int count = 0;
+	unsigned int next_entry;
+	struct sk_buff *skb;
+	unsigned int entry = priv->rx_cons % priv->rx_ring_size;
+	u32 rxstatus;
+	u16 pktlength;
+	u16 pktstatus;
+
+	while ((rxstatus = priv->dmaops->get_rx_status(priv)) != 0) {
+		pktstatus = rxstatus >> 16;
+		pktlength = rxstatus & 0xffff;
+
+		if ((pktstatus & 0xFF) || (pktlength == 0))
+			netdev_err(priv->dev,
+				   "RCV pktstatus %08X pktlength %08X\n",
+				   pktstatus, pktlength);
+
+		count++;
+		next_entry = (++priv->rx_cons) % priv->rx_ring_size;
+
+		skb = priv->rx_ring[entry].skb;
+		if (unlikely(!skb)) {
+			netdev_err(priv->dev,
+				   "%s: Inconsistent Rx descriptor chain\n",
+				   __func__);
+			priv->dev->stats.rx_dropped++;
+			break;
+		}
+		priv->rx_ring[entry].skb = NULL;
+
+		skb_put(skb, pktlength);
+
+		/* make cache consistent with receive packet buffer */
+		dma_sync_single_for_cpu(priv->device,
+					priv->rx_ring[entry].dma_addr,
+					priv->rx_ring[entry].len,
+					DMA_FROM_DEVICE);
+
+		dma_unmap_single(priv->device, priv->rx_ring[entry].dma_addr,
+				 priv->rx_ring[entry].len, DMA_FROM_DEVICE);
+
+		if (netif_msg_pktdata(priv)) {
+			netdev_info(priv->dev, "frame received %d bytes\n",
+				    pktlength);
+			print_hex_dump(KERN_ERR, "data: ", DUMP_PREFIX_OFFSET,
+				       16, 1, skb->data, pktlength, true);
+		}
+
+		tse_rx_vlan(priv->dev, skb);
+
+		skb->protocol = eth_type_trans(skb, priv->dev);
+		skb_checksum_none_assert(skb);
+
+		napi_gro_receive(&priv->napi, skb);
+
+		priv->dev->stats.rx_packets++;
+		priv->dev->stats.rx_bytes += pktlength;
+
+		entry = next_entry;
+	}
+
+	tse_rx_refill(priv);
+	return count;
+}
+
+/* Reclaim resources after transmission completes
+ */
+static int tse_tx_complete(struct altera_tse_private *priv)
+{
+	unsigned int txsize = priv->tx_ring_size;
+	u32 ready;
+	unsigned int entry;
+	struct tse_buffer *tx_buff;
+	int txcomplete = 0;
+
+	spin_lock(&priv->tx_lock);
+
+	ready = priv->dmaops->tx_completions(priv);
+
+	/* Free sent buffers */
+	while (ready && (priv->tx_cons != priv->tx_prod)) {
+		entry = priv->tx_cons % txsize;
+		tx_buff = &priv->tx_ring[entry];
+
+		if (netif_msg_tx_done(priv))
+			netdev_dbg(priv->dev, "%s: curr %d, dirty %d\n",
+				   __func__, priv->tx_prod, priv->tx_cons);
+
+		if (likely(tx_buff->skb))
+			priv->dev->stats.tx_packets++;
+
+		tse_free_tx_buffer(priv, tx_buff);
+		priv->tx_cons++;
+
+		txcomplete++;
+		ready--;
+	}
+
+	if (unlikely(netif_queue_stopped(priv->dev) &&
+		     tse_tx_avail(priv) > TSE_TX_THRESH(priv))) {
+		netif_tx_lock(priv->dev);
+		if (netif_queue_stopped(priv->dev) &&
+		    tse_tx_avail(priv) > TSE_TX_THRESH(priv)) {
+			if (netif_msg_tx_done(priv))
+				netdev_dbg(priv->dev, "%s: restart transmit\n",
+					   __func__);
+			netif_wake_queue(priv->dev);
+		}
+		netif_tx_unlock(priv->dev);
+	}
+
+	spin_unlock(&priv->tx_lock);
+	return txcomplete;
+}
+
+/* NAPI polling function
+ */
+static int tse_poll(struct napi_struct *napi, int budget)
+{
+	struct altera_tse_private *priv =
+			container_of(napi, struct altera_tse_private, napi);
+	int rxcomplete = 0;
+	int txcomplete = 0;
+	unsigned long int flags;
+
+	txcomplete = tse_tx_complete(priv);
+
+	rxcomplete = tse_rx(priv, budget);
+
+	if (rxcomplete >= budget || txcomplete > 0)
+		return rxcomplete;
+
+	napi_gro_flush(napi, false);
+	__napi_complete(napi);
+
+	netdev_dbg(priv->dev,
+		   "NAPI Complete, did %d packets with budget %d\n",
+		   txcomplete+rxcomplete, budget);
+
+	spin_lock_irqsave(&priv->rxdma_irq_lock, flags);
+	priv->dmaops->enable_rxirq(priv);
+	priv->dmaops->enable_txirq(priv);
+	spin_unlock_irqrestore(&priv->rxdma_irq_lock, flags);
+	return rxcomplete + txcomplete;
+}
+
+/* DMA TX & RX FIFO interrupt routing
+ */
+static irqreturn_t altera_isr(int irq, void *dev_id)
+{
+	struct net_device *dev = dev_id;
+	struct altera_tse_private *priv;
+	unsigned long int flags;
+
+
+	if (unlikely(!dev)) {
+		pr_err("%s: invalid dev pointer\n", __func__);
+		return IRQ_NONE;
+	}
+	priv = netdev_priv(dev);
+
+	/* turn off desc irqs and enable napi rx */
+	spin_lock_irqsave(&priv->rxdma_irq_lock, flags);
+
+	if (likely(napi_schedule_prep(&priv->napi))) {
+		priv->dmaops->disable_rxirq(priv);
+		priv->dmaops->disable_txirq(priv);
+		__napi_schedule(&priv->napi);
+	}
+
+	/* reset IRQs */
+	priv->dmaops->clear_rxirq(priv);
+	priv->dmaops->clear_txirq(priv);
+
+	spin_unlock_irqrestore(&priv->rxdma_irq_lock, flags);
+
+	return IRQ_HANDLED;
+}
+
+/* Transmit a packet (called by the kernel). Dispatches
+ * either the SGDMA method for transmitting or the
+ * MSGDMA method, assumes no scatter/gather support,
+ * implying an assumption that there's only one
+ * physically contiguous fragment starting at
+ * skb->data, for length of skb_headlen(skb).
+ */
+static int tse_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct altera_tse_private *priv = netdev_priv(dev);
+	unsigned int txsize = priv->tx_ring_size;
+	unsigned int entry;
+	struct tse_buffer *buffer = NULL;
+	int nfrags = skb_shinfo(skb)->nr_frags;
+	unsigned int nopaged_len = skb_headlen(skb);
+	enum netdev_tx ret = NETDEV_TX_OK;
+	dma_addr_t dma_addr;
+	int txcomplete = 0;
+
+	spin_lock_bh(&priv->tx_lock);
+
+	if (unlikely(tse_tx_avail(priv) < nfrags + 1)) {
+		if (!netif_queue_stopped(dev)) {
+			netif_stop_queue(dev);
+			/* This is a hard error, log it. */
+			netdev_err(priv->dev,
+				   "%s: Tx list full when queue awake\n",
+				   __func__);
+		}
+		ret = NETDEV_TX_BUSY;
+		goto out;
+	}
+
+	/* Map the first skb fragment */
+	entry = priv->tx_prod % txsize;
+	buffer = &priv->tx_ring[entry];
+
+	dma_addr = dma_map_single(priv->device, skb->data, nopaged_len,
+				  DMA_TO_DEVICE);
+	if (dma_mapping_error(priv->device, dma_addr)) {
+		netdev_err(priv->dev, "%s: DMA mapping error\n", __func__);
+		ret = NETDEV_TX_OK;
+		goto out;
+	}
+
+	buffer->skb = skb;
+	buffer->dma_addr = dma_addr;
+	buffer->len = nopaged_len;
+
+	/* Push data out of the cache hierarchy into main memory */
+	dma_sync_single_for_device(priv->device, buffer->dma_addr,
+				   buffer->len, DMA_TO_DEVICE);
+
+	txcomplete = priv->dmaops->tx_buffer(priv, buffer);
+
+	skb_tx_timestamp(skb);
+
+	priv->tx_prod++;
+	dev->stats.tx_bytes += skb->len;
+
+	if (unlikely(tse_tx_avail(priv) <= TXQUEUESTOP_THRESHHOLD)) {
+		if (netif_msg_hw(priv))
+			netdev_dbg(priv->dev, "%s: stop transmitted packets\n",
+				   __func__);
+		netif_stop_queue(dev);
+	}
+
+out:
+	spin_unlock_bh(&priv->tx_lock);
+
+	return ret;
+}
+
+/* Called every time the controller might need to be made
+ * aware of new link state.  The PHY code conveys this
+ * information through variables in the phydev structure, and this
+ * function converts those variables into the appropriate
+ * register values, and can bring down the device if needed.
+ */
+static void altera_tse_adjust_link(struct net_device *dev)
+{
+	struct altera_tse_private *priv = netdev_priv(dev);
+	struct phy_device *phydev = priv->phydev;
+	int new_state = 0;
+
+	/* only change config if there is a link */
+	spin_lock(&priv->mac_cfg_lock);
+	if (phydev->link) {
+		/* Read old config */
+		u32 cfg_reg = ioread32(&priv->mac_dev->command_config);
+
+		/* Check duplex */
+		if (phydev->duplex != priv->oldduplex) {
+			new_state = 1;
+			if (!(phydev->duplex))
+				cfg_reg |= MAC_CMDCFG_HD_ENA;
+			else
+				cfg_reg &= ~MAC_CMDCFG_HD_ENA;
+
+			netdev_dbg(priv->dev, "%s: Link duplex = 0x%x\n",
+				   dev->name, phydev->duplex);
+
+			priv->oldduplex = phydev->duplex;
+		}
+
+		/* Check speed */
+		if (phydev->speed != priv->oldspeed) {
+			new_state = 1;
+			switch (phydev->speed) {
+			case 1000:
+				cfg_reg |= MAC_CMDCFG_ETH_SPEED;
+				cfg_reg &= ~MAC_CMDCFG_ENA_10;
+				break;
+			case 100:
+				cfg_reg &= ~MAC_CMDCFG_ETH_SPEED;
+				cfg_reg &= ~MAC_CMDCFG_ENA_10;
+				break;
+			case 10:
+				cfg_reg &= ~MAC_CMDCFG_ETH_SPEED;
+				cfg_reg |= MAC_CMDCFG_ENA_10;
+				break;
+			default:
+				if (netif_msg_link(priv))
+					netdev_warn(dev, "Speed (%d) is not 10/100/1000!\n",
+						    phydev->speed);
+				break;
+			}
+			priv->oldspeed = phydev->speed;
+		}
+		iowrite32(cfg_reg, &priv->mac_dev->command_config);
+
+		if (!priv->oldlink) {
+			new_state = 1;
+			priv->oldlink = 1;
+		}
+	} else if (priv->oldlink) {
+		new_state = 1;
+		priv->oldlink = 0;
+		priv->oldspeed = 0;
+		priv->oldduplex = -1;
+	}
+
+	if (new_state && netif_msg_link(priv))
+		phy_print_status(phydev);
+
+	spin_unlock(&priv->mac_cfg_lock);
+}
+static struct phy_device *connect_local_phy(struct net_device *dev)
+{
+	struct altera_tse_private *priv = netdev_priv(dev);
+	struct phy_device *phydev = NULL;
+	char phy_id_fmt[MII_BUS_ID_SIZE + 3];
+	int ret;
+
+	if (priv->phy_addr != POLL_PHY) {
+		snprintf(phy_id_fmt, MII_BUS_ID_SIZE + 3, PHY_ID_FMT,
+			 priv->mdio->id, priv->phy_addr);
+
+		netdev_dbg(dev, "trying to attach to %s\n", phy_id_fmt);
+
+		phydev = phy_connect(dev, phy_id_fmt, &altera_tse_adjust_link,
+				     priv->phy_iface);
+		if (IS_ERR(phydev))
+			netdev_err(dev, "Could not attach to PHY\n");
+
+	} else {
+		phydev = phy_find_first(priv->mdio);
+		if (phydev == NULL) {
+			netdev_err(dev, "No PHY found\n");
+			return phydev;
+		}
+
+		ret = phy_connect_direct(dev, phydev, &altera_tse_adjust_link,
+				priv->phy_iface);
+		if (ret != 0) {
+			netdev_err(dev, "Could not attach to PHY\n");
+			phydev = NULL;
+		}
+	}
+	return phydev;
+}
+
+/* Initialize driver's PHY state, and attach to the PHY
+ */
+static int init_phy(struct net_device *dev)
+{
+	struct altera_tse_private *priv = netdev_priv(dev);
+	struct phy_device *phydev;
+	struct device_node *phynode;
+
+	priv->oldlink = 0;
+	priv->oldspeed = 0;
+	priv->oldduplex = -1;
+
+	phynode = of_parse_phandle(priv->device->of_node, "phy-handle", 0);
+
+	if (!phynode) {
+		netdev_dbg(dev, "no phy-handle found\n");
+		if (!priv->mdio) {
+			netdev_err(dev,
+				   "No phy-handle nor local mdio specified\n");
+			return -ENODEV;
+		}
+		phydev = connect_local_phy(dev);
+	} else {
+		netdev_dbg(dev, "phy-handle found\n");
+		phydev = of_phy_connect(dev, phynode,
+			&altera_tse_adjust_link, 0, priv->phy_iface);
+	}
+
+	if (!phydev) {
+		netdev_err(dev, "Could not find the PHY\n");
+		return -ENODEV;
+	}
+
+	/* Stop Advertising 1000BASE Capability if interface is not GMII
+	 * Note: Checkpatch throws CHECKs for the camel case defines below,
+	 * it's ok to ignore.
+	 */
+	if ((priv->phy_iface == PHY_INTERFACE_MODE_MII) ||
+	    (priv->phy_iface == PHY_INTERFACE_MODE_RMII))
+		phydev->advertising &= ~(SUPPORTED_1000baseT_Half |
+					 SUPPORTED_1000baseT_Full);
+
+	/* Broken HW is sometimes missing the pull-up resistor on the
+	 * MDIO line, which results in reads to non-existent devices returning
+	 * 0 rather than 0xffff. Catch this here and treat 0 as a non-existent
+	 * device as well.
+	 * Note: phydev->phy_id is the result of reading the UID PHY registers.
+	 */
+	if (phydev->phy_id == 0) {
+		netdev_err(dev, "Bad PHY UID 0x%08x\n", phydev->phy_id);
+		phy_disconnect(phydev);
+		return -ENODEV;
+	}
+
+	netdev_dbg(dev, "attached to PHY %d UID 0x%08x Link = %d\n",
+		   phydev->addr, phydev->phy_id, phydev->link);
+
+	priv->phydev = phydev;
+	return 0;
+}
+
+static void tse_update_mac_addr(struct altera_tse_private *priv, u8 *addr)
+{
+	struct altera_tse_mac *mac = priv->mac_dev;
+	u32 msb;
+	u32 lsb;
+
+	msb = (addr[3] << 24) | (addr[2] << 16) | (addr[1] << 8) | addr[0];
+	lsb = ((addr[5] << 8) | addr[4]) & 0xffff;
+
+	/* Set primary MAC address */
+	iowrite32(msb, &mac->mac_addr_0);
+	iowrite32(lsb, &mac->mac_addr_1);
+}
+
+/* MAC software reset.
+ * When reset is triggered, the MAC function completes the current
+ * transmission or reception, and subsequently disables the transmit and
+ * receive logic, flushes the receive FIFO buffer, and resets the statistics
+ * counters.
+ */
+static int reset_mac(struct altera_tse_private *priv)
+{
+	void __iomem *cmd_cfg_reg = &priv->mac_dev->command_config;
+	int counter;
+	u32 dat;
+
+	dat = ioread32(cmd_cfg_reg);
+	dat &= ~(MAC_CMDCFG_TX_ENA | MAC_CMDCFG_RX_ENA);
+	dat |= MAC_CMDCFG_SW_RESET | MAC_CMDCFG_CNT_RESET;
+	iowrite32(dat, cmd_cfg_reg);
+
+	counter = 0;
+	while (counter++ < ALTERA_TSE_SW_RESET_WATCHDOG_CNTR) {
+		if (tse_bit_is_clear(cmd_cfg_reg, MAC_CMDCFG_SW_RESET))
+			break;
+		udelay(1);
+	}
+
+	if (counter >= ALTERA_TSE_SW_RESET_WATCHDOG_CNTR) {
+		dat = ioread32(cmd_cfg_reg);
+		dat &= ~MAC_CMDCFG_SW_RESET;
+		iowrite32(dat, cmd_cfg_reg);
+		return -1;
+	}
+	return 0;
+}
+
+/* Initialize MAC core registers
+*/
+static int init_mac(struct altera_tse_private *priv)
+{
+	struct altera_tse_mac *mac = priv->mac_dev;
+	unsigned int cmd = 0;
+	u32 frm_length;
+
+	/* Setup Rx FIFO */
+	iowrite32(priv->rx_fifo_depth - ALTERA_TSE_RX_SECTION_EMPTY,
+		  &mac->rx_section_empty);
+	iowrite32(ALTERA_TSE_RX_SECTION_FULL, &mac->rx_section_full);
+	iowrite32(ALTERA_TSE_RX_ALMOST_EMPTY, &mac->rx_almost_empty);
+	iowrite32(ALTERA_TSE_RX_ALMOST_FULL, &mac->rx_almost_full);
+
+	/* Setup Tx FIFO */
+	iowrite32(priv->tx_fifo_depth - ALTERA_TSE_TX_SECTION_EMPTY,
+		  &mac->tx_section_empty);
+	iowrite32(ALTERA_TSE_TX_SECTION_FULL, &mac->tx_section_full);
+	iowrite32(ALTERA_TSE_TX_ALMOST_EMPTY, &mac->tx_almost_empty);
+	iowrite32(ALTERA_TSE_TX_ALMOST_FULL, &mac->tx_almost_full);
+
+	/* MAC Address Configuration */
+	tse_update_mac_addr(priv, priv->dev->dev_addr);
+
+	/* MAC Function Configuration */
+	frm_length = ETH_HLEN + priv->dev->mtu + ETH_FCS_LEN;
+	iowrite32(frm_length, &mac->frm_length);
+	iowrite32(ALTERA_TSE_TX_IPG_LENGTH, &mac->tx_ipg_length);
+
+	/* Disable RX/TX shift 16 for alignment of all received frames on 16-bit
+	 * start address
+	 */
+	tse_clear_bit(&mac->rx_cmd_stat, ALTERA_TSE_RX_CMD_STAT_RX_SHIFT16);
+	tse_clear_bit(&mac->tx_cmd_stat, ALTERA_TSE_TX_CMD_STAT_TX_SHIFT16 |
+					 ALTERA_TSE_TX_CMD_STAT_OMIT_CRC);
+
+	/* Set the MAC options */
+	cmd = ioread32(&mac->command_config);
+	cmd |= MAC_CMDCFG_PAD_EN;	/* Padding Removal on Receive */
+	cmd &= ~MAC_CMDCFG_CRC_FWD;	/* CRC Removal */
+	cmd |= MAC_CMDCFG_RX_ERR_DISC;	/* Automatically discard frames
+					 * with CRC errors
+					 */
+	cmd |= MAC_CMDCFG_CNTL_FRM_ENA;
+	cmd &= ~MAC_CMDCFG_TX_ENA;
+	cmd &= ~MAC_CMDCFG_RX_ENA;
+	iowrite32(cmd, &mac->command_config);
+
+	if (netif_msg_hw(priv))
+		dev_dbg(priv->device,
+			"MAC post-initialization: CMD_CONFIG = 0x%08x\n", cmd);
+
+	return 0;
+}
+
+/* Start/stop MAC transmission logic
+ */
+static void tse_set_mac(struct altera_tse_private *priv, bool enable)
+{
+	struct altera_tse_mac *mac = priv->mac_dev;
+	u32 value = ioread32(&mac->command_config);
+
+	if (enable)
+		value |= MAC_CMDCFG_TX_ENA | MAC_CMDCFG_RX_ENA;
+	else
+		value &= ~(MAC_CMDCFG_TX_ENA | MAC_CMDCFG_RX_ENA);
+
+	iowrite32(value, &mac->command_config);
+}
+
+/* Change the MTU
+ */
+static int tse_change_mtu(struct net_device *dev, int new_mtu)
+{
+	struct altera_tse_private *priv = netdev_priv(dev);
+	unsigned int max_mtu = priv->max_mtu;
+	unsigned int min_mtu = ETH_ZLEN + ETH_FCS_LEN;
+
+	if (netif_running(dev)) {
+		netdev_err(dev, "must be stopped to change its MTU\n");
+		return -EBUSY;
+	}
+
+	if ((new_mtu < min_mtu) || (new_mtu > max_mtu)) {
+		netdev_err(dev, "invalid MTU, max MTU is: %u\n", max_mtu);
+		return -EINVAL;
+	}
+
+	dev->mtu = new_mtu;
+	netdev_update_features(dev);
+
+	return 0;
+}
+
+static void altera_tse_set_mcfilter(struct net_device *dev)
+{
+	struct altera_tse_private *priv = netdev_priv(dev);
+	struct altera_tse_mac *mac = (struct altera_tse_mac *)priv->mac_dev;
+	int i;
+	struct netdev_hw_addr *ha;
+
+	/* clear the hash filter */
+	for (i = 0; i < 64; i++)
+		iowrite32(0, &(mac->hash_table[i]));
+
+	netdev_for_each_mc_addr(ha, dev) {
+		unsigned int hash = 0;
+		int mac_octet;
+
+		for (mac_octet = 5; mac_octet >= 0; mac_octet--) {
+			unsigned char xor_bit = 0;
+			unsigned char octet = ha->addr[mac_octet];
+			unsigned int bitshift;
+
+			for (bitshift = 0; bitshift < 8; bitshift++)
+				xor_bit ^= ((octet >> bitshift) & 0x01);
+
+			hash = (hash << 1) | xor_bit;
+		}
+		iowrite32(1, &(mac->hash_table[hash]));
+	}
+}
+
+
+static void altera_tse_set_mcfilterall(struct net_device *dev)
+{
+	struct altera_tse_private *priv = netdev_priv(dev);
+	struct altera_tse_mac *mac = (struct altera_tse_mac *)priv->mac_dev;
+	int i;
+
+	/* set the hash filter */
+	for (i = 0; i < 64; i++)
+		iowrite32(1, &(mac->hash_table[i]));
+}
+
+/* Set or clear the multicast filter for this adaptor
+ */
+static void tse_set_rx_mode_hashfilter(struct net_device *dev)
+{
+	struct altera_tse_private *priv = netdev_priv(dev);
+	struct altera_tse_mac *mac = priv->mac_dev;
+
+	spin_lock(&priv->mac_cfg_lock);
+
+	if (dev->flags & IFF_PROMISC)
+		tse_set_bit(&mac->command_config, MAC_CMDCFG_PROMIS_EN);
+
+	if (dev->flags & IFF_ALLMULTI)
+		altera_tse_set_mcfilterall(dev);
+	else
+		altera_tse_set_mcfilter(dev);
+
+	spin_unlock(&priv->mac_cfg_lock);
+}
+
+/* Set or clear the multicast filter for this adaptor
+ */
+static void tse_set_rx_mode(struct net_device *dev)
+{
+	struct altera_tse_private *priv = netdev_priv(dev);
+	struct altera_tse_mac *mac = priv->mac_dev;
+
+	spin_lock(&priv->mac_cfg_lock);
+
+	if ((dev->flags & IFF_PROMISC) || (dev->flags & IFF_ALLMULTI) ||
+	    !netdev_mc_empty(dev) || !netdev_uc_empty(dev))
+		tse_set_bit(&mac->command_config, MAC_CMDCFG_PROMIS_EN);
+	else
+		tse_clear_bit(&mac->command_config, MAC_CMDCFG_PROMIS_EN);
+
+	spin_unlock(&priv->mac_cfg_lock);
+}
+
+/* Open and initialize the interface
+ */
+static int tse_open(struct net_device *dev)
+{
+	struct altera_tse_private *priv = netdev_priv(dev);
+	int ret = 0;
+	int i;
+	unsigned long int flags;
+
+	/* Reset and configure TSE MAC and probe associated PHY */
+	ret = priv->dmaops->init_dma(priv);
+	if (ret != 0) {
+		netdev_err(dev, "Cannot initialize DMA\n");
+		goto phy_error;
+	}
+
+	if (netif_msg_ifup(priv))
+		netdev_warn(dev, "device MAC address %pM\n",
+			    dev->dev_addr);
+
+	if ((priv->revision < 0xd00) || (priv->revision > 0xe00))
+		netdev_warn(dev, "TSE revision %x\n", priv->revision);
+
+	spin_lock(&priv->mac_cfg_lock);
+	ret = reset_mac(priv);
+	if (ret)
+		netdev_err(dev, "Cannot reset MAC core (error: %d)\n", ret);
+
+	ret = init_mac(priv);
+	spin_unlock(&priv->mac_cfg_lock);
+	if (ret) {
+		netdev_err(dev, "Cannot init MAC core (error: %d)\n", ret);
+		goto alloc_skbuf_error;
+	}
+
+	priv->dmaops->reset_dma(priv);
+
+	/* Create and initialize the TX/RX descriptors chains. */
+	priv->rx_ring_size = dma_rx_num;
+	priv->tx_ring_size = dma_tx_num;
+	ret = alloc_init_skbufs(priv);
+	if (ret) {
+		netdev_err(dev, "DMA descriptors initialization failed\n");
+		goto alloc_skbuf_error;
+	}
+
+
+	/* Register RX interrupt */
+	ret = request_irq(priv->rx_irq, altera_isr, IRQF_SHARED,
+			  dev->name, dev);
+	if (ret) {
+		netdev_err(dev, "Unable to register RX interrupt %d\n",
+			   priv->rx_irq);
+		goto init_error;
+	}
+
+	/* Register TX interrupt */
+	ret = request_irq(priv->tx_irq, altera_isr, IRQF_SHARED,
+			  dev->name, dev);
+	if (ret) {
+		netdev_err(dev, "Unable to register TX interrupt %d\n",
+			   priv->tx_irq);
+		goto tx_request_irq_error;
+	}
+
+	/* Enable DMA interrupts */
+	spin_lock_irqsave(&priv->rxdma_irq_lock, flags);
+	priv->dmaops->enable_rxirq(priv);
+	priv->dmaops->enable_txirq(priv);
+
+	/* Setup RX descriptor chain */
+	for (i = 0; i < priv->rx_ring_size; i++)
+		priv->dmaops->add_rx_desc(priv, &priv->rx_ring[i]);
+
+	spin_unlock_irqrestore(&priv->rxdma_irq_lock, flags);
+
+	/* Start MAC Rx/Tx */
+	spin_lock(&priv->mac_cfg_lock);
+	tse_set_mac(priv, true);
+	spin_unlock(&priv->mac_cfg_lock);
+
+	if (priv->phydev)
+		phy_start(priv->phydev);
+
+	napi_enable(&priv->napi);
+	netif_start_queue(dev);
+
+	return 0;
+
+tx_request_irq_error:
+	free_irq(priv->rx_irq, dev);
+init_error:
+	free_skbufs(dev);
+alloc_skbuf_error:
+	if (priv->phydev) {
+		phy_disconnect(priv->phydev);
+		priv->phydev = NULL;
+	}
+phy_error:
+	return ret;
+}
+
+/* Stop TSE MAC interface and put the device in an inactive state
+ */
+static int tse_shutdown(struct net_device *dev)
+{
+	struct altera_tse_private *priv = netdev_priv(dev);
+	int ret;
+	unsigned long int flags;
+
+	/* Stop and disconnect the PHY */
+	if (priv->phydev) {
+		phy_stop(priv->phydev);
+		phy_disconnect(priv->phydev);
+		priv->phydev = NULL;
+	}
+
+	netif_stop_queue(dev);
+	napi_disable(&priv->napi);
+
+	/* Disable DMA interrupts */
+	spin_lock_irqsave(&priv->rxdma_irq_lock, flags);
+	priv->dmaops->disable_rxirq(priv);
+	priv->dmaops->disable_txirq(priv);
+	spin_unlock_irqrestore(&priv->rxdma_irq_lock, flags);
+
+	/* Free the IRQ lines */
+	free_irq(priv->rx_irq, dev);
+	free_irq(priv->tx_irq, dev);
+
+	/* disable and reset the MAC, empties fifo */
+	spin_lock(&priv->mac_cfg_lock);
+	spin_lock(&priv->tx_lock);
+
+	ret = reset_mac(priv);
+	if (ret)
+		netdev_err(dev, "Cannot reset MAC core (error: %d)\n", ret);
+	priv->dmaops->reset_dma(priv);
+	free_skbufs(dev);
+
+	spin_unlock(&priv->tx_lock);
+	spin_unlock(&priv->mac_cfg_lock);
+
+	priv->dmaops->uninit_dma(priv);
+
+	return 0;
+}
+
+static struct net_device_ops altera_tse_netdev_ops = {
+	.ndo_open		= tse_open,
+	.ndo_stop		= tse_shutdown,
+	.ndo_start_xmit		= tse_start_xmit,
+	.ndo_set_mac_address	= eth_mac_addr,
+	.ndo_set_rx_mode	= tse_set_rx_mode,
+	.ndo_change_mtu		= tse_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
+
+static int request_and_map(struct platform_device *pdev, const char *name,
+			   struct resource **res, void __iomem **ptr)
+{
+	struct resource *region;
+	struct device *device = &pdev->dev;
+
+	*res = platform_get_resource_byname(pdev, IORESOURCE_MEM, name);
+	if (*res == NULL) {
+		dev_err(device, "resource %s not defined\n", name);
+		return -ENODEV;
+	}
+
+	region = devm_request_mem_region(device, (*res)->start,
+					 resource_size(*res), dev_name(device));
+	if (region == NULL) {
+		dev_err(device, "unable to request %s\n", name);
+		return -EBUSY;
+	}
+
+	*ptr = devm_ioremap_nocache(device, region->start,
+				    resource_size(region));
+	if (*ptr == NULL) {
+		dev_err(device, "ioremap_nocache of %s failed!", name);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+/* Probe Altera TSE MAC device
+ */
+static int altera_tse_probe(struct platform_device *pdev)
+{
+	struct net_device *ndev;
+	int ret = -ENODEV;
+	struct resource *control_port;
+	struct resource *dma_res;
+	struct altera_tse_private *priv;
+	const unsigned char *macaddr;
+	struct device_node *np = pdev->dev.of_node;
+	void __iomem *descmap;
+	const struct of_device_id *of_id = NULL;
+
+	ndev = alloc_etherdev(sizeof(struct altera_tse_private));
+	if (!ndev) {
+		dev_err(&pdev->dev, "Could not allocate network device\n");
+		return -ENODEV;
+	}
+
+	SET_NETDEV_DEV(ndev, &pdev->dev);
+
+	priv = netdev_priv(ndev);
+	priv->device = &pdev->dev;
+	priv->dev = ndev;
+	priv->msg_enable = netif_msg_init(debug, default_msg_level);
+
+	of_id = of_match_device(altera_tse_ids, &pdev->dev);
+
+	if (of_id)
+		priv->dmaops = (struct altera_dmaops *)of_id->data;
+
+
+	if (priv->dmaops &&
+	    priv->dmaops->altera_dtype == ALTERA_DTYPE_SGDMA) {
+		/* Get the mapped address to the SGDMA descriptor memory */
+		ret = request_and_map(pdev, "s1", &dma_res, &descmap);
+		if (ret)
+			goto out_free;
+
+		/* Start of that memory is for transmit descriptors */
+		priv->tx_dma_desc = descmap;
+
+		/* First half is for tx descriptors, other half for tx */
+		priv->txdescmem = resource_size(dma_res)/2;
+
+		priv->txdescmem_busaddr = (dma_addr_t)dma_res->start;
+
+		priv->rx_dma_desc = (void __iomem *)((uintptr_t)(descmap +
+						     priv->txdescmem));
+		priv->rxdescmem = resource_size(dma_res)/2;
+		priv->rxdescmem_busaddr = dma_res->start;
+		priv->rxdescmem_busaddr += priv->txdescmem;
+
+		if (upper_32_bits(priv->rxdescmem_busaddr)) {
+			dev_dbg(priv->device,
+				"SGDMA bus addresses greater than 32-bits\n");
+			goto out_free;
+		}
+		if (upper_32_bits(priv->txdescmem_busaddr)) {
+			dev_dbg(priv->device,
+				"SGDMA bus addresses greater than 32-bits\n");
+			goto out_free;
+		}
+	} else if (priv->dmaops &&
+		   priv->dmaops->altera_dtype == ALTERA_DTYPE_MSGDMA) {
+		ret = request_and_map(pdev, "rx_resp", &dma_res,
+				      &priv->rx_dma_resp);
+		if (ret)
+			goto out_free;
+
+		ret = request_and_map(pdev, "tx_desc", &dma_res,
+				      &priv->tx_dma_desc);
+		if (ret)
+			goto out_free;
+
+		priv->txdescmem = resource_size(dma_res);
+		priv->txdescmem_busaddr = dma_res->start;
+
+		ret = request_and_map(pdev, "rx_desc", &dma_res,
+				      &priv->rx_dma_desc);
+		if (ret)
+			goto out_free;
+
+		priv->rxdescmem = resource_size(dma_res);
+		priv->rxdescmem_busaddr = dma_res->start;
+
+	} else {
+		goto out_free;
+	}
+
+	if (!dma_set_mask(priv->device, DMA_BIT_MASK(priv->dmaops->dmamask)))
+		dma_set_coherent_mask(priv->device,
+				      DMA_BIT_MASK(priv->dmaops->dmamask));
+	else if (!dma_set_mask(priv->device, DMA_BIT_MASK(32)))
+		dma_set_coherent_mask(priv->device, DMA_BIT_MASK(32));
+	else
+		goto out_free;
+
+	/* MAC address space */
+	ret = request_and_map(pdev, "control_port", &control_port,
+			      (void __iomem **)&priv->mac_dev);
+	if (ret)
+		goto out_free;
+
+	/* xSGDMA Rx Dispatcher address space */
+	ret = request_and_map(pdev, "rx_csr", &dma_res,
+			      &priv->rx_dma_csr);
+	if (ret)
+		goto out_free;
+
+
+	/* xSGDMA Tx Dispatcher address space */
+	ret = request_and_map(pdev, "tx_csr", &dma_res,
+			      &priv->tx_dma_csr);
+	if (ret)
+		goto out_free;
+
+
+	/* Rx IRQ */
+	priv->rx_irq = platform_get_irq_byname(pdev, "rx_irq");
+	if (priv->rx_irq == -ENXIO) {
+		dev_err(&pdev->dev, "cannot obtain Rx IRQ\n");
+		ret = -ENXIO;
+		goto out_free;
+	}
+
+	/* Tx IRQ */
+	priv->tx_irq = platform_get_irq_byname(pdev, "tx_irq");
+	if (priv->tx_irq == -ENXIO) {
+		dev_err(&pdev->dev, "cannot obtain Tx IRQ\n");
+		ret = -ENXIO;
+		goto out_free;
+	}
+
+	/* get FIFO depths from device tree */
+	if (of_property_read_u32(pdev->dev.of_node, "rx-fifo-depth",
+				 &priv->rx_fifo_depth)) {
+		dev_err(&pdev->dev, "cannot obtain rx-fifo-depth\n");
+		ret = -ENXIO;
+		goto out_free;
+	}
+
+	if (of_property_read_u32(pdev->dev.of_node, "tx-fifo-depth",
+				 &priv->rx_fifo_depth)) {
+		dev_err(&pdev->dev, "cannot obtain tx-fifo-depth\n");
+		ret = -ENXIO;
+		goto out_free;
+	}
+
+	/* get hash filter settings for this instance */
+	priv->hash_filter =
+		of_property_read_bool(pdev->dev.of_node,
+				      "altr,has-hash-multicast-filter");
+
+	/* get supplemental address settings for this instance */
+	priv->added_unicast =
+		of_property_read_bool(pdev->dev.of_node,
+				      "altr,has-supplementary-unicast");
+
+	/* Max MTU is 1500, ETH_DATA_LEN */
+	priv->max_mtu = ETH_DATA_LEN;
+
+	/* Get the max mtu from the device tree. Note that the
+	 * "max-frame-size" parameter is actually max mtu. Definition
+	 * in the ePAPR v1.1 spec and usage differ, so go with usage.
+	 */
+	of_property_read_u32(pdev->dev.of_node, "max-frame-size",
+			     &priv->max_mtu);
+
+	/* The DMA buffer size already accounts for an alignment bias
+	 * to avoid unaligned access exceptions for the NIOS processor,
+	 */
+	priv->rx_dma_buf_sz = ALTERA_RXDMABUFFER_SIZE;
+
+	/* get default MAC address from device tree */
+	macaddr = of_get_mac_address(pdev->dev.of_node);
+	if (macaddr)
+		ether_addr_copy(ndev->dev_addr, macaddr);
+	else
+		eth_hw_addr_random(ndev);
+
+	priv->phy_iface = of_get_phy_mode(np);
+
+	/* try to get PHY address from device tree, use PHY autodetection if
+	 * no valid address is given
+	 */
+	if (of_property_read_u32(pdev->dev.of_node, "phy-addr",
+				 &priv->phy_addr)) {
+		priv->phy_addr = POLL_PHY;
+	}
+
+	if (!((priv->phy_addr == POLL_PHY) ||
+	      ((priv->phy_addr >= 0) && (priv->phy_addr < PHY_MAX_ADDR)))) {
+		dev_err(&pdev->dev, "invalid phy-addr specified %d\n",
+			priv->phy_addr);
+		goto out_free;
+	}
+
+	/* Create/attach to MDIO bus */
+	ret = altera_tse_mdio_create(ndev,
+				     atomic_add_return(1, &instance_count));
+
+	if (ret)
+		goto out_free;
+
+	/* initialize netdev */
+	ether_setup(ndev);
+	ndev->mem_start = control_port->start;
+	ndev->mem_end = control_port->end;
+	ndev->netdev_ops = &altera_tse_netdev_ops;
+	altera_tse_set_ethtool_ops(ndev);
+
+	altera_tse_netdev_ops.ndo_set_rx_mode = tse_set_rx_mode;
+
+	if (priv->hash_filter)
+		altera_tse_netdev_ops.ndo_set_rx_mode =
+			tse_set_rx_mode_hashfilter;
+
+	/* Scatter/gather IO is not supported,
+	 * so it is turned off
+	 */
+	ndev->hw_features &= ~NETIF_F_SG;
+	ndev->features |= ndev->hw_features | NETIF_F_HIGHDMA;
+
+	/* VLAN offloading of tagging, stripping and filtering is not
+	 * supported by hardware, but driver will accommodate the
+	 * extra 4-byte VLAN tag for processing by upper layers
+	 */
+	ndev->features |= NETIF_F_HW_VLAN_CTAG_RX;
+
+	/* setup NAPI interface */
+	netif_napi_add(ndev, &priv->napi, tse_poll, NAPI_POLL_WEIGHT);
+
+	spin_lock_init(&priv->mac_cfg_lock);
+	spin_lock_init(&priv->tx_lock);
+	spin_lock_init(&priv->rxdma_irq_lock);
+
+	ret = register_netdev(ndev);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register TSE net device\n");
+		goto out_free_mdio;
+	}
+
+	platform_set_drvdata(pdev, ndev);
+
+	priv->revision = ioread32(&priv->mac_dev->megacore_revision);
+
+	if (netif_msg_probe(priv))
+		dev_info(&pdev->dev, "Altera TSE MAC version %d.%d at 0x%08lx irq %d/%d\n",
+			 (priv->revision >> 8) & 0xff,
+			 priv->revision & 0xff,
+			 (unsigned long) control_port->start, priv->rx_irq,
+			 priv->tx_irq);
+
+	ret = init_phy(ndev);
+	if (ret != 0) {
+		netdev_err(ndev, "Cannot attach to PHY (error: %d)\n", ret);
+		goto out_free_mdio;
+	}
+	return 0;
+
+out_free_mdio:
+	altera_tse_mdio_destroy(ndev);
+out_free:
+	free_netdev(ndev);
+	return ret;
+}
+
+/* Remove Altera TSE MAC device
+ */
+static int altera_tse_remove(struct platform_device *pdev)
+{
+	struct net_device *ndev = platform_get_drvdata(pdev);
+
+	platform_set_drvdata(pdev, NULL);
+	altera_tse_mdio_destroy(ndev);
+	unregister_netdev(ndev);
+	free_netdev(ndev);
+
+	return 0;
+}
+
+struct altera_dmaops altera_dtype_sgdma = {
+	.altera_dtype = ALTERA_DTYPE_SGDMA,
+	.dmamask = 32,
+	.reset_dma = sgdma_reset,
+	.enable_txirq = sgdma_enable_txirq,
+	.enable_rxirq = sgdma_enable_rxirq,
+	.disable_txirq = sgdma_disable_txirq,
+	.disable_rxirq = sgdma_disable_rxirq,
+	.clear_txirq = sgdma_clear_txirq,
+	.clear_rxirq = sgdma_clear_rxirq,
+	.tx_buffer = sgdma_tx_buffer,
+	.tx_completions = sgdma_tx_completions,
+	.add_rx_desc = sgdma_add_rx_desc,
+	.get_rx_status = sgdma_rx_status,
+	.init_dma = sgdma_initialize,
+	.uninit_dma = sgdma_uninitialize,
+};
+
+struct altera_dmaops altera_dtype_msgdma = {
+	.altera_dtype = ALTERA_DTYPE_MSGDMA,
+	.dmamask = 64,
+	.reset_dma = msgdma_reset,
+	.enable_txirq = msgdma_enable_txirq,
+	.enable_rxirq = msgdma_enable_rxirq,
+	.disable_txirq = msgdma_disable_txirq,
+	.disable_rxirq = msgdma_disable_rxirq,
+	.clear_txirq = msgdma_clear_txirq,
+	.clear_rxirq = msgdma_clear_rxirq,
+	.tx_buffer = msgdma_tx_buffer,
+	.tx_completions = msgdma_tx_completions,
+	.add_rx_desc = msgdma_add_rx_desc,
+	.get_rx_status = msgdma_rx_status,
+	.init_dma = msgdma_initialize,
+	.uninit_dma = msgdma_uninitialize,
+};
+
+static struct of_device_id altera_tse_ids[] = {
+	{ .compatible = "altr,tse-msgdma-1.0", .data = &altera_dtype_msgdma, },
+	{ .compatible = "altr,tse-1.0", .data = &altera_dtype_sgdma, },
+	{ .compatible = "ALTR,tse-1.0", .data = &altera_dtype_sgdma, },
+	{},
+};
+MODULE_DEVICE_TABLE(of, altera_tse_ids);
+
+static struct platform_driver altera_tse_driver = {
+	.probe		= altera_tse_probe,
+	.remove		= altera_tse_remove,
+	.suspend	= NULL,
+	.resume		= NULL,
+	.driver		= {
+		.name	= ALTERA_TSE_RESOURCE_NAME,
+		.owner	= THIS_MODULE,
+		.of_match_table = altera_tse_ids,
+	},
+};
+
+module_platform_driver(altera_tse_driver);
+
+MODULE_AUTHOR("Altera Corporation");
+MODULE_DESCRIPTION("Altera Triple Speed Ethernet MAC driver");
+MODULE_LICENSE("GPL v2");
-- 
cgit v1.2.2


From ed33ef648964d228793575f1a25317a50e54ceb3 Mon Sep 17 00:00:00 2001
From: Vince Bridgers <vbridgers2013@gmail.com>
Date: Mon, 17 Mar 2014 17:52:39 -0500
Subject: Altera TSE: Add Altera Ethernet Driver Makefile and Kconfig

This patch adds the Altera Triple Speed Ethernet Makfile and
Kconfig file.

Signed-off-by: Vince Bridgers <vbridgers2013@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/altera/Kconfig  | 8 ++++++++
 drivers/net/ethernet/altera/Makefile | 7 +++++++
 2 files changed, 15 insertions(+)
 create mode 100644 drivers/net/ethernet/altera/Kconfig
 create mode 100644 drivers/net/ethernet/altera/Makefile

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/altera/Kconfig b/drivers/net/ethernet/altera/Kconfig
new file mode 100644
index 000000000000..80c1ab74a4b8
--- /dev/null
+++ b/drivers/net/ethernet/altera/Kconfig
@@ -0,0 +1,8 @@
+config ALTERA_TSE
+	tristate "Altera Triple-Speed Ethernet MAC support"
+	select PHYLIB
+	---help---
+	  This driver supports the Altera Triple-Speed (TSE) Ethernet MAC.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called alteratse.
diff --git a/drivers/net/ethernet/altera/Makefile b/drivers/net/ethernet/altera/Makefile
new file mode 100644
index 000000000000..d4a187e45369
--- /dev/null
+++ b/drivers/net/ethernet/altera/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the Altera device drivers.
+#
+
+obj-$(CONFIG_ALTERA_TSE) += altera_tse.o
+altera_tse-objs := altera_tse_main.o altera_tse_ethtool.o \
+altera_msgdma.o altera_sgdma.o altera_utils.o
-- 
cgit v1.2.2


From f7b18249ef15788f7f4bb9c9d4a6016b3efb0500 Mon Sep 17 00:00:00 2001
From: Vince Bridgers <vbridgers2013@gmail.com>
Date: Mon, 17 Mar 2014 17:52:41 -0500
Subject: net: ethernet: Change Ethernet Makefile and Kconfig for Altera TSE
 driver

This patch changes the Ethernet Makefile and Kconfig files to add the Altera
Ethernet driver component.

Signed-off-by: Vince Bridgers <vbridgers2013@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/Kconfig  | 1 +
 drivers/net/ethernet/Makefile | 1 +
 2 files changed, 2 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 506b0248c400..39484b534f5e 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -22,6 +22,7 @@ source "drivers/net/ethernet/adaptec/Kconfig"
 source "drivers/net/ethernet/aeroflex/Kconfig"
 source "drivers/net/ethernet/allwinner/Kconfig"
 source "drivers/net/ethernet/alteon/Kconfig"
+source "drivers/net/ethernet/altera/Kconfig"
 source "drivers/net/ethernet/amd/Kconfig"
 source "drivers/net/ethernet/apple/Kconfig"
 source "drivers/net/ethernet/arc/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index c0b8789952e7..adf61af507f7 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_NET_VENDOR_ADAPTEC) += adaptec/
 obj-$(CONFIG_GRETH) += aeroflex/
 obj-$(CONFIG_NET_VENDOR_ALLWINNER) += allwinner/
 obj-$(CONFIG_NET_VENDOR_ALTEON) += alteon/
+obj-$(CONFIG_ALTERA_TSE) += altera/
 obj-$(CONFIG_NET_VENDOR_AMD) += amd/
 obj-$(CONFIG_NET_VENDOR_APPLE) += apple/
 obj-$(CONFIG_NET_VENDOR_ARC) += arc/
-- 
cgit v1.2.2


From 406d49656f80b1e6d37d67e187a640243ed87ba9 Mon Sep 17 00:00:00 2001
From: Fernando Luis Vazquez Cao <fernando_b1@lab.ntt.co.jp>
Date: Tue, 18 Mar 2014 00:26:48 -0700
Subject: igb: remove references to long gone command line parameters

Command line parameters QueuePairs, Node, EEE, DMAC and InterruptThrottleRate
do not exist these days. Remove all references to them in the Documentation
folder and update code comments.

Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/igb/igb_main.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index d6b11522fed7..ac06492fb816 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -4347,8 +4347,7 @@ enum latency_range {
  *  were determined based on theoretical maximum wire speed and testing
  *  data, in order to minimize response time while increasing bulk
  *  throughput.
- *  This functionality is controlled by the InterruptThrottleRate module
- *  parameter (see igb_param.c)
+ *  This functionality is controlled by ethtool's coalescing settings.
  *  NOTE:  This function is called only when operating in a multiqueue
  *         receive environment.
  **/
@@ -4422,8 +4421,7 @@ clear_counts:
  *  based on theoretical maximum wire speed and thresholds were set based
  *  on testing data as well as attempting to minimize response time
  *  while increasing bulk throughput.
- *  this functionality is controlled by the InterruptThrottleRate module
- *  parameter (see igb_param.c)
+ *  This functionality is controlled by ethtool's coalescing settings.
  *  NOTE:  These calculations are only valid when operating in a single-
  *         queue environment.
  **/
-- 
cgit v1.2.2


From 72f72dcc146fd7c4f9a8544626b961d52f1399b3 Mon Sep 17 00:00:00 2001
From: Kevin Hao <haokexin@gmail.com>
Date: Tue, 18 Mar 2014 00:26:49 -0700
Subject: e1000e: fix the build error when PM is disabled

The commit 2800209994f8 (e1000e: Refactor PM flows) changed the
SET_SYSTEM_SLEEP_PM_OPS to open-coded assignment, but forgot to
protect them with CONFIG_PM_SLEEP. Then cause the following build
error when PM is disabled:
drivers/net/ethernet/intel/e1000e/netdev.c:7079:13:
error: 'e1000e_pm_suspend' undeclared here (not in a function)
  .suspend = e1000e_pm_suspend,
             ^
drivers/net/ethernet/intel/e1000e/netdev.c:7080:13:
error: 'e1000e_pm_resume' undeclared here (not in a function)
  .resume  = e1000e_pm_resume,
             ^
drivers/net/ethernet/intel/e1000e/netdev.c:7082:11:
error: 'e1000e_pm_thaw' undeclared here (not in a function)
  .thaw  = e1000e_pm_thaw,
           ^
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/e1000e/netdev.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 3f044e736de8..eafad410e59a 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -7076,12 +7076,14 @@ static DEFINE_PCI_DEVICE_TABLE(e1000_pci_tbl) = {
 MODULE_DEVICE_TABLE(pci, e1000_pci_tbl);
 
 static const struct dev_pm_ops e1000_pm_ops = {
+#ifdef CONFIG_PM_SLEEP
 	.suspend	= e1000e_pm_suspend,
 	.resume		= e1000e_pm_resume,
 	.freeze		= e1000e_pm_freeze,
 	.thaw		= e1000e_pm_thaw,
 	.poweroff	= e1000e_pm_suspend,
 	.restore	= e1000e_pm_resume,
+#endif
 	SET_RUNTIME_PM_OPS(e1000e_pm_runtime_suspend, e1000e_pm_runtime_resume,
 			   e1000e_pm_runtime_idle)
 };
-- 
cgit v1.2.2


From 37a622c1931d6fb41b30c308b4f077cb8696b16a Mon Sep 17 00:00:00 2001
From: Eric W Biederman <ebiederm@xmission.com>
Date: Tue, 18 Mar 2014 00:26:50 -0700
Subject: i40evf: Rename i40e_ptype_lookup i40evf_ptype_lookup

When compiling the i40e and the i40evf driver into the same kernel I get:
LD      drivers/net/ethernet/intel/built-in.o
drivers/net/ethernet/intel/i40evf/built-in.o:(.data+0x300): multiple definition of `i40e_ptype_lookup'
drivers/net/ethernet/intel/i40e/built-in.o:(.data+0x780): first defined here
make[3]: *** [drivers/net/ethernet/intel/built-in.o] Error 1
make[2]: *** [drivers/net/ethernet/intel] Error 2
make[1]: *** [drivers/net/ethernet/] Error 2
make: *** [sub-make] Error 2

Fix this by renaming the i40evf version of this structure from
i40e_ptype_lookup to i40evf_ptype_lookup.

This build failure was introduced in:
  commit 206812b5fccb808d1194344eaa942f68f59b2630
  Author: Jesse Brandeburg <jesse.brandeburg@intel.com>
  i40e/i40evf: i40e implementation for skb_set_hash

Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Catherine Sullivan <catherine.sullivan@intel.com>
Signed-off-by: Eric W Biederman <ebiederm@xmission.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/i40evf/i40e_common.c    | 8 ++++----
 drivers/net/ethernet/intel/i40evf/i40e_prototype.h | 4 ++--
 2 files changed, 6 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40evf/i40e_common.c b/drivers/net/ethernet/intel/i40evf/i40e_common.c
index 78618af271cf..c688a0fc5c29 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_common.c
+++ b/drivers/net/ethernet/intel/i40evf/i40e_common.c
@@ -160,7 +160,7 @@ i40e_status i40evf_aq_queue_shutdown(struct i40e_hw *hw,
 }
 
 
-/* The i40e_ptype_lookup table is used to convert from the 8-bit ptype in the
+/* The i40evf_ptype_lookup table is used to convert from the 8-bit ptype in the
  * hardware to a bit-field that can be used by SW to more easily determine the
  * packet type.
  *
@@ -173,10 +173,10 @@ i40e_status i40evf_aq_queue_shutdown(struct i40e_hw *hw,
  *
  * Typical work flow:
  *
- * IF NOT i40e_ptype_lookup[ptype].known
+ * IF NOT i40evf_ptype_lookup[ptype].known
  * THEN
  *      Packet is unknown
- * ELSE IF i40e_ptype_lookup[ptype].outer_ip == I40E_RX_PTYPE_OUTER_IP
+ * ELSE IF i40evf_ptype_lookup[ptype].outer_ip == I40E_RX_PTYPE_OUTER_IP
  *      Use the rest of the fields to look at the tunnels, inner protocols, etc
  * ELSE
  *      Use the enum i40e_rx_l2_ptype to decode the packet type
@@ -205,7 +205,7 @@ i40e_status i40evf_aq_queue_shutdown(struct i40e_hw *hw,
 #define I40E_RX_PTYPE_INNER_PROT_TS	I40E_RX_PTYPE_INNER_PROT_TIMESYNC
 
 /* Lookup table mapping the HW PTYPE to the bit field for decoding */
-struct i40e_rx_ptype_decoded i40e_ptype_lookup[] = {
+struct i40e_rx_ptype_decoded i40evf_ptype_lookup[] = {
 	/* L2 Packet types */
 	I40E_PTT_UNUSED_ENTRY(0),
 	I40E_PTT(1,  L2, NONE, NOF, NONE, NONE, NOF, NONE, PAY2),
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_prototype.h b/drivers/net/ethernet/intel/i40evf/i40e_prototype.h
index 33c99051cc96..862fcdf52675 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_prototype.h
+++ b/drivers/net/ethernet/intel/i40evf/i40e_prototype.h
@@ -63,11 +63,11 @@ i40e_status i40evf_aq_queue_shutdown(struct i40e_hw *hw,
 
 i40e_status i40e_set_mac_type(struct i40e_hw *hw);
 
-extern struct i40e_rx_ptype_decoded i40e_ptype_lookup[];
+extern struct i40e_rx_ptype_decoded i40evf_ptype_lookup[];
 
 static inline struct i40e_rx_ptype_decoded decode_rx_desc_ptype(u8 ptype)
 {
-	return  i40e_ptype_lookup[ptype];
+	return  i40evf_ptype_lookup[ptype];
 }
 
 /* prototype for functions used for SW locks */
-- 
cgit v1.2.2


From d70e941bff5f223017ba7001b8eb0423a636c070 Mon Sep 17 00:00:00 2001
From: Or Gerlitz <ogerlitz@mellanox.com>
Date: Tue, 18 Mar 2014 10:36:45 +0200
Subject: net/i40e: Avoid double setting of NETIF_F_SG for the HW encapsulation
 feature mask

The networking core does it for the driver during registration time.

Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index c66a11e31e6f..3daaf205eabc 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -6578,10 +6578,9 @@ static int i40e_config_netdev(struct i40e_vsi *vsi)
 	np = netdev_priv(netdev);
 	np->vsi = vsi;
 
-	netdev->hw_enc_features = NETIF_F_IP_CSUM	 |
+	netdev->hw_enc_features |= NETIF_F_IP_CSUM	 |
 				  NETIF_F_GSO_UDP_TUNNEL |
-				  NETIF_F_TSO		 |
-				  NETIF_F_SG;
+				  NETIF_F_TSO;
 
 	netdev->features = NETIF_F_SG		       |
 			   NETIF_F_IP_CSUM	       |
-- 
cgit v1.2.2


From 86a2b9cfccea1fb1fcb16a549ccddfe40be391d1 Mon Sep 17 00:00:00 2001
From: Veaceslav Falico <vfalico@redhat.com>
Date: Sun, 16 Mar 2014 17:55:03 +0100
Subject: bonding: ratelimit pr_warn()s in 802.3ad mode

Only ratelimit the ones that might spam, omiting the ones from
enslave/deslave.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_3ad.c | 34 +++++++++++++++++-----------------
 1 file changed, 17 insertions(+), 17 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index dee2a84a2929..b667a51ed215 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -1284,11 +1284,11 @@ static void ad_port_selection_logic(struct port *port)
 			/* meaning: the port was related to an aggregator
 			 * but was not on the aggregator port list
 			 */
-			pr_warn("%s: Warning: Port %d (on %s) was related to aggregator %d but was not on its port list\n",
-				port->slave->bond->dev->name,
-				port->actor_port_number,
-				port->slave->dev->name,
-				port->aggregator->aggregator_identifier);
+			pr_warn_ratelimited("%s: Warning: Port %d (on %s) was related to aggregator %d but was not on its port list\n",
+					    port->slave->bond->dev->name,
+					    port->actor_port_number,
+					    port->slave->dev->name,
+					    port->aggregator->aggregator_identifier);
 		}
 	}
 	/* search on all aggregators for a suitable aggregator for this port */
@@ -1445,9 +1445,9 @@ static struct aggregator *ad_agg_selection_test(struct aggregator *best,
 		break;
 
 	default:
-		pr_warn("%s: Impossible agg select mode %d\n",
-			curr->slave->bond->dev->name,
-			__get_agg_selection_mode(curr->lag_ports));
+		pr_warn_ratelimited("%s: Impossible agg select mode %d\n",
+				    curr->slave->bond->dev->name,
+				    __get_agg_selection_mode(curr->lag_ports));
 		break;
 	}
 
@@ -1560,9 +1560,9 @@ static void ad_agg_selection_logic(struct aggregator *agg)
 
 		/* check if any partner replys */
 		if (best->is_individual) {
-			pr_warn("%s: Warning: No 802.3ad response from the link partner for any adapters in the bond\n",
-				best->slave ?
-				best->slave->bond->dev->name : "NULL");
+			pr_warn_ratelimited("%s: Warning: No 802.3ad response from the link partner for any adapters in the bond\n",
+					    best->slave ?
+					    best->slave->bond->dev->name : "NULL");
 		}
 
 		best->is_active = 1;
@@ -2081,8 +2081,8 @@ void bond_3ad_state_machine_handler(struct work_struct *work)
 		/* select the active aggregator for the bond */
 		if (port) {
 			if (!port->slave) {
-				pr_warn("%s: Warning: bond's first port is uninitialized\n",
-					bond->dev->name);
+				pr_warn_ratelimited("%s: Warning: bond's first port is uninitialized\n",
+						    bond->dev->name);
 				goto re_arm;
 			}
 
@@ -2096,8 +2096,8 @@ void bond_3ad_state_machine_handler(struct work_struct *work)
 	bond_for_each_slave_rcu(bond, slave, iter) {
 		port = &(SLAVE_AD_INFO(slave).port);
 		if (!port->slave) {
-			pr_warn("%s: Warning: Found an uninitialized port\n",
-				bond->dev->name);
+			pr_warn_ratelimited("%s: Warning: Found an uninitialized port\n",
+					    bond->dev->name);
 			goto re_arm;
 		}
 
@@ -2158,8 +2158,8 @@ static int bond_3ad_rx_indication(struct lacpdu *lacpdu, struct slave *slave,
 		port = &(SLAVE_AD_INFO(slave).port);
 
 		if (!port->slave) {
-			pr_warn("%s: Warning: port of slave %s is uninitialized\n",
-				slave->dev->name, slave->bond->dev->name);
+			pr_warn_ratelimited("%s: Warning: port of slave %s is uninitialized\n",
+					    slave->dev->name, slave->bond->dev->name);
 			return ret;
 		}
 
-- 
cgit v1.2.2


From 1bd3cbc1a0e9ed977a6bd470c5bc7bd36fd87e26 Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Tue, 18 Mar 2014 21:15:06 +0200
Subject: iwlwifi: mvm: send udev event upon firmware error to dump logs

When the firmware asserts, the driver will dump the firmware
state to an internal buffer. This buffer is kept aside until
it is dumped through debugfs. Once an external application
fetched the data, the buffer is freed and a new buffer can
be allocated in case another assert occurs.

A udev event is sent to trigger an external application.

A simple rule like:
DRIVER=="iwlwifi", ACTION=="change", RUN+="/sbin/dump_sram.sh"

can fetch the data from debugfs.

Here is my dump_sram.sh:

phyname=$(basename ${DEVPATH})
date=$(date +%F_%H_%M)
filename=/var/log/iwl-sram-${phyname}-${date}.bin
cat /sys/kernel/debug/ieee80211/${phyname}/iwlwifi/iwlmvm/fw_error_dump > ${filename}

The current SRAM size is 80KB so, currently:
$ ls -lh iwl-sram-phy0-2014-03-16_13_14.bin
-rw-r--r-- 1 emmanuel emmanuel 81K Mar 16 13:15 iwl-sram-phy0-2014-03-16_13_14.bin

and after compression:
$ ls -lh iwl-sram-phy0-2014-03-16_13_14.bin.xz
-rw-r--r-- 1 emmanuel emmanuel 13K Mar 16 13:15 iwl-sram-phy0-2014-03-16_13_14.bin.xz

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/debugfs.c       |  53 ++++++++++++
 drivers/net/wireless/iwlwifi/mvm/fw-error-dump.h | 106 +++++++++++++++++++++++
 drivers/net/wireless/iwlwifi/mvm/mac80211.c      |   9 ++
 drivers/net/wireless/iwlwifi/mvm/mvm.h           |   8 +-
 drivers/net/wireless/iwlwifi/mvm/ops.c           |  47 +++++++++-
 drivers/net/wireless/iwlwifi/mvm/utils.c         |  27 +++---
 6 files changed, 230 insertions(+), 20 deletions(-)
 create mode 100644 drivers/net/wireless/iwlwifi/mvm/fw-error-dump.h

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/debugfs.c b/drivers/net/wireless/iwlwifi/mvm/debugfs.c
index 21ef8daede05..cf1fa498e53e 100644
--- a/drivers/net/wireless/iwlwifi/mvm/debugfs.c
+++ b/drivers/net/wireless/iwlwifi/mvm/debugfs.c
@@ -65,6 +65,7 @@
 #include "iwl-io.h"
 #include "iwl-prph.h"
 #include "debugfs.h"
+#include "fw-error-dump.h"
 
 static ssize_t iwl_dbgfs_tx_flush_write(struct iwl_mvm *mvm, char *buf,
 					size_t count, loff_t *ppos)
@@ -117,6 +118,51 @@ static ssize_t iwl_dbgfs_sta_drain_write(struct iwl_mvm *mvm, char *buf,
 	return ret;
 }
 
+static int iwl_dbgfs_fw_error_dump_open(struct inode *inode, struct file *file)
+{
+	struct iwl_mvm *mvm = inode->i_private;
+	int ret;
+
+	if (!mvm)
+		return -EINVAL;
+
+	mutex_lock(&mvm->mutex);
+	if (!mvm->fw_error_dump) {
+		ret = -ENODATA;
+		goto out;
+	}
+
+	file->private_data = mvm->fw_error_dump;
+	mvm->fw_error_dump = NULL;
+	kfree(mvm->fw_error_sram);
+	mvm->fw_error_sram = NULL;
+	mvm->fw_error_sram_len = 0;
+	ret = 0;
+
+out:
+	mutex_unlock(&mvm->mutex);
+	return ret;
+}
+
+static ssize_t iwl_dbgfs_fw_error_dump_read(struct file *file,
+					    char __user *user_buf,
+					    size_t count, loff_t *ppos)
+{
+	struct iwl_fw_error_dump_file *dump_file = file->private_data;
+
+	return simple_read_from_buffer(user_buf, count, ppos,
+				       dump_file,
+				       le32_to_cpu(dump_file->file_len));
+}
+
+static int iwl_dbgfs_fw_error_dump_release(struct inode *inode,
+					   struct file *file)
+{
+	vfree(file->private_data);
+
+	return 0;
+}
+
 static ssize_t iwl_dbgfs_sram_read(struct file *file, char __user *user_buf,
 				   size_t count, loff_t *ppos)
 {
@@ -1042,6 +1088,12 @@ MVM_DEBUGFS_WRITE_FILE_OPS(fw_nmi, 10);
 MVM_DEBUGFS_READ_WRITE_FILE_OPS(scan_ant_rxchain, 8);
 MVM_DEBUGFS_READ_WRITE_FILE_OPS(d0i3_refs, 8);
 
+static const struct file_operations iwl_dbgfs_fw_error_dump_ops = {
+        .open = iwl_dbgfs_fw_error_dump_open,
+        .read = iwl_dbgfs_fw_error_dump_read,
+        .release = iwl_dbgfs_fw_error_dump_release,
+};
+
 #ifdef CONFIG_IWLWIFI_BCAST_FILTERING
 MVM_DEBUGFS_READ_WRITE_FILE_OPS(bcast_filters, 256);
 MVM_DEBUGFS_READ_WRITE_FILE_OPS(bcast_filters_macs, 256);
@@ -1064,6 +1116,7 @@ int iwl_mvm_dbgfs_register(struct iwl_mvm *mvm, struct dentry *dbgfs_dir)
 	MVM_DEBUGFS_ADD_FILE(sta_drain, mvm->debugfs_dir, S_IWUSR);
 	MVM_DEBUGFS_ADD_FILE(sram, mvm->debugfs_dir, S_IWUSR | S_IRUSR);
 	MVM_DEBUGFS_ADD_FILE(stations, dbgfs_dir, S_IRUSR);
+	MVM_DEBUGFS_ADD_FILE(fw_error_dump, dbgfs_dir, S_IRUSR);
 	MVM_DEBUGFS_ADD_FILE(bt_notif, dbgfs_dir, S_IRUSR);
 	MVM_DEBUGFS_ADD_FILE(bt_cmd, dbgfs_dir, S_IRUSR);
 	if (mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_DEVICE_PS_CMD)
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-error-dump.h b/drivers/net/wireless/iwlwifi/mvm/fw-error-dump.h
new file mode 100644
index 000000000000..58c8941c0d95
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-error-dump.h
@@ -0,0 +1,106 @@
+/******************************************************************************
+ *
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2014 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called COPYING.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *  * Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  * Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  * Neither the name Intel Corporation nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *****************************************************************************/
+
+#ifndef __fw_error_dump_h__
+#define __fw_error_dump_h__
+
+#include <linux/types.h>
+
+#define IWL_FW_ERROR_DUMP_BARKER	0x14789632
+
+/**
+ * enum iwl_fw_error_dump_type - types of data in the dump file
+ * @IWL_FW_ERROR_DUMP_SRAM:
+ * @IWL_FW_ERROR_DUMP_REG:
+ */
+enum iwl_fw_error_dump_type {
+	IWL_FW_ERROR_DUMP_SRAM = 0,
+	IWL_FW_ERROR_DUMP_REG = 1,
+
+	IWL_FW_ERROR_DUMP_MAX,
+};
+
+/**
+ * struct iwl_fw_error_dump_data - data for one type
+ * @type: %enum iwl_fw_error_dump_type
+ * @len: the length starting from %data - must be a multiplier of 4.
+ * @data: the data itself padded to be a multiplier of 4.
+ */
+struct iwl_fw_error_dump_data {
+	__le32 type;
+	__le32 len;
+	__u8 data[];
+} __packed __aligned(4);
+
+/**
+ * struct iwl_fw_error_dump_file - the layout of the header of the file
+ * @barker: must be %IWL_FW_ERROR_DUMP_BARKER
+ * @file_len: the length of all the file starting from %barker
+ * @data: array of %struct iwl_fw_error_dump_data
+ */
+struct iwl_fw_error_dump_file {
+	__le32 barker;
+	__le32 file_len;
+	u8 data[0];
+} __packed __aligned(4);
+
+#endif /* __fw_error_dump_h__ */
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index 48a8e67992f8..8414c031e274 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -607,6 +607,15 @@ static void iwl_mvm_cleanup_iterator(void *data, u8 *mac,
 
 static void iwl_mvm_restart_cleanup(struct iwl_mvm *mvm)
 {
+#ifdef CONFIG_IWLWIFI_DEBUGFS
+	static char *env[] = { "DRIVER=iwlwifi", "EVENT=error_dump", NULL };
+
+	iwl_mvm_fw_error_dump(mvm);
+
+	/* notify the userspace about the error we had */
+	kobject_uevent_env(&mvm->hw->wiphy->dev.kobj, KOBJ_CHANGE, env);
+#endif
+
 	iwl_trans_stop_device(mvm->trans);
 
 	mvm->scan_status = IWL_MVM_SCAN_NONE;
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index 46fe81702963..cb6dbb140820 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -575,6 +575,9 @@ struct iwl_mvm {
 
 	/* -1 for always, 0 for never, >0 for that many times */
 	s8 restart_fw;
+	void *fw_error_dump;
+	void *fw_error_sram;
+	u32 fw_error_sram_len;
 
 	struct led_classdev led;
 
@@ -698,7 +701,10 @@ void iwl_mvm_hwrate_to_tx_rate(u32 rate_n_flags,
 			       struct ieee80211_tx_rate *r);
 u8 iwl_mvm_mac80211_idx_to_hwrate(int rate_idx);
 void iwl_mvm_dump_nic_error_log(struct iwl_mvm *mvm);
-void iwl_mvm_dump_sram(struct iwl_mvm *mvm);
+#ifdef CONFIG_IWLWIFI_DEBUGFS
+void iwl_mvm_fw_error_dump(struct iwl_mvm *mvm);
+void iwl_mvm_fw_error_sram_dump(struct iwl_mvm *mvm);
+#endif
 u8 first_antenna(u8 mask);
 u8 iwl_mvm_next_antenna(struct iwl_mvm *mvm, u8 valid, u8 last_idx);
 
diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c
index 10846b648d70..9545d7fdd4bf 100644
--- a/drivers/net/wireless/iwlwifi/mvm/ops.c
+++ b/drivers/net/wireless/iwlwifi/mvm/ops.c
@@ -61,6 +61,7 @@
  *
  *****************************************************************************/
 #include <linux/module.h>
+#include <linux/vmalloc.h>
 #include <net/mac80211.h>
 
 #include "iwl-notif-wait.h"
@@ -78,6 +79,7 @@
 #include "iwl-prph.h"
 #include "rs.h"
 #include "fw-api-scan.h"
+#include "fw-error-dump.h"
 #include "time-event.h"
 
 /*
@@ -534,6 +536,8 @@ static void iwl_op_mode_mvm_stop(struct iwl_op_mode *op_mode)
 	ieee80211_unregister_hw(mvm->hw);
 
 	kfree(mvm->scan_cmd);
+	vfree(mvm->fw_error_dump);
+	kfree(mvm->fw_error_sram);
 	kfree(mvm->mcast_filter_cmd);
 	mvm->mcast_filter_cmd = NULL;
 
@@ -804,13 +808,52 @@ static void iwl_mvm_nic_restart(struct iwl_mvm *mvm)
 	}
 }
 
+#ifdef CONFIG_IWLWIFI_DEBUGFS
+void iwl_mvm_fw_error_dump(struct iwl_mvm *mvm)
+{
+	struct iwl_fw_error_dump_file *dump_file;
+	struct iwl_fw_error_dump_data *dump_data;
+	u32 file_len;
+
+	lockdep_assert_held(&mvm->mutex);
+
+	if (mvm->fw_error_dump)
+		return;
+
+	file_len = mvm->fw_error_sram_len +
+		   sizeof(*dump_file) +
+		   sizeof(*dump_data);
+
+	dump_file = vmalloc(file_len);
+	if (!dump_file)
+		return;
+
+	mvm->fw_error_dump = dump_file;
+
+	dump_file->barker = cpu_to_le32(IWL_FW_ERROR_DUMP_BARKER);
+	dump_file->file_len = cpu_to_le32(file_len);
+	dump_data = (void *)dump_file->data;
+	dump_data->type = IWL_FW_ERROR_DUMP_SRAM;
+	dump_data->len = cpu_to_le32(mvm->fw_error_sram_len);
+
+	/*
+	 * No need for lock since at the stage the FW isn't loaded. So it
+	 * can't assert - we are the only one who can possibly be accessing
+	 * mvm->fw_error_sram right now.
+	 */
+	memcpy(dump_data->data, mvm->fw_error_sram, mvm->fw_error_sram_len);
+}
+#endif
+
 static void iwl_mvm_nic_error(struct iwl_op_mode *op_mode)
 {
 	struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode);
 
 	iwl_mvm_dump_nic_error_log(mvm);
-	if (!mvm->restart_fw)
-		iwl_mvm_dump_sram(mvm);
+
+#ifdef CONFIG_IWLWIFI_DEBUGFS
+	iwl_mvm_fw_error_sram_dump(mvm);
+#endif
 
 	iwl_mvm_nic_restart(mvm);
 }
diff --git a/drivers/net/wireless/iwlwifi/mvm/utils.c b/drivers/net/wireless/iwlwifi/mvm/utils.c
index bbfe529d7b64..e9de033d6b9e 100644
--- a/drivers/net/wireless/iwlwifi/mvm/utils.c
+++ b/drivers/net/wireless/iwlwifi/mvm/utils.c
@@ -516,33 +516,26 @@ void iwl_mvm_dump_nic_error_log(struct iwl_mvm *mvm)
 		iwl_mvm_dump_umac_error_log(mvm);
 }
 
-void iwl_mvm_dump_sram(struct iwl_mvm *mvm)
+void iwl_mvm_fw_error_sram_dump(struct iwl_mvm *mvm)
 {
 	const struct fw_img *img;
-	int ofs, len = 0;
-	int i;
-	__le32 *buf;
+	u32 ofs, sram_len;
+	void *sram;
 
-	if (!mvm->ucode_loaded)
+	if (!mvm->ucode_loaded || mvm->fw_error_sram)
 		return;
 
 	img = &mvm->fw->img[mvm->cur_ucode];
 	ofs = img->sec[IWL_UCODE_SECTION_DATA].offset;
-	len = img->sec[IWL_UCODE_SECTION_DATA].len;
+	sram_len = img->sec[IWL_UCODE_SECTION_DATA].len;
 
-	buf = kzalloc(len, GFP_ATOMIC);
-	if (!buf)
+	sram = kzalloc(sram_len, GFP_ATOMIC);
+	if (!sram)
 		return;
 
-	iwl_trans_read_mem_bytes(mvm->trans, ofs, buf, len);
-	len = len >> 2;
-	for (i = 0; i < len; i++) {
-		IWL_ERR(mvm, "0x%08X\n", le32_to_cpu(buf[i]));
-		/* Add a small delay to let syslog catch up */
-		udelay(10);
-	}
-
-	kfree(buf);
+	iwl_trans_read_mem_bytes(mvm->trans, ofs, sram, sram_len);
+	mvm->fw_error_sram = sram;
+	mvm->fw_error_sram_len = sram_len;
 }
 
 /**
-- 
cgit v1.2.2


From cdb00563fe2c25a782d2fc57ad1778280fbf9edb Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Sun, 16 Mar 2014 21:55:43 +0200
Subject: iwlwifi: mvm: BT Coex - add debugfs hook to set BT Tx priority

In order to debug the firmware, we need to be able to set
the BT priority of WiFi packets. This priority is set based
on the type of the packet (control frames, EAPOL etc...).
For debugging purposes, allow to override this priority by
a debugfs controlled value.
Enable this feature that needs this priority to be able to
test it.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/coex.c        |  8 ++++++++
 drivers/net/wireless/iwlwifi/mvm/constants.h   |  1 +
 drivers/net/wireless/iwlwifi/mvm/debugfs.c     | 18 ++++++++++++++++++
 drivers/net/wireless/iwlwifi/mvm/fw-api-coex.h |  2 ++
 drivers/net/wireless/iwlwifi/mvm/mvm.h         |  1 +
 5 files changed, 30 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/coex.c b/drivers/net/wireless/iwlwifi/mvm/coex.c
index 018d75c805ad..c9b320a06070 100644
--- a/drivers/net/wireless/iwlwifi/mvm/coex.c
+++ b/drivers/net/wireless/iwlwifi/mvm/coex.c
@@ -616,6 +616,11 @@ int iwl_send_bt_init_conf(struct iwl_mvm *mvm)
 		bt_cmd->flags |= cpu_to_le32(BT_COEX_CORUNNING);
 	}
 
+	if (IWL_MVM_BT_COEX_MPLUT) {
+		bt_cmd->flags |= cpu_to_le32(BT_COEX_MPLUT);
+		bt_cmd->valid_bit_msk = cpu_to_le32(BT_VALID_MULTI_PRIO_LUT);
+	}
+
 	if (mvm->cfg->bt_shared_single_ant)
 		memcpy(&bt_cmd->decision_lut, iwl_single_shared_ant,
 		       sizeof(iwl_single_shared_ant));
@@ -1215,6 +1220,9 @@ u8 iwl_mvm_bt_coex_tx_prio(struct iwl_mvm *mvm, struct ieee80211_hdr *hdr,
 	if (info->band != IEEE80211_BAND_2GHZ)
 		return 0;
 
+	if (unlikely(mvm->bt_tx_prio))
+		return mvm->bt_tx_prio - 1;
+
 	/* High prio packet (wrt. BT coex) if it is EAPOL, MCAST or MGMT */
 	if (info->control.flags & IEEE80211_TX_CTRL_PORT_CTRL_PROTO ||
 	     is_multicast_ether_addr(hdr->addr1) ||
diff --git a/drivers/net/wireless/iwlwifi/mvm/constants.h b/drivers/net/wireless/iwlwifi/mvm/constants.h
index 37d5f3594c4f..921b177a92b8 100644
--- a/drivers/net/wireless/iwlwifi/mvm/constants.h
+++ b/drivers/net/wireless/iwlwifi/mvm/constants.h
@@ -83,5 +83,6 @@
 #define IWL_MVM_LOWLAT_DUAL_BINDING_MAXDUR	24 /* TU */
 #define IWL_MVM_BT_COEX_SYNC2SCO		1
 #define IWL_MVM_BT_COEX_CORUNNING		1
+#define IWL_MVM_BT_COEX_MPLUT			1
 
 #endif /* __MVM_CONSTANTS_H */
diff --git a/drivers/net/wireless/iwlwifi/mvm/debugfs.c b/drivers/net/wireless/iwlwifi/mvm/debugfs.c
index cf1fa498e53e..2566fa9913ef 100644
--- a/drivers/net/wireless/iwlwifi/mvm/debugfs.c
+++ b/drivers/net/wireless/iwlwifi/mvm/debugfs.c
@@ -441,6 +441,22 @@ static ssize_t iwl_dbgfs_bt_cmd_read(struct file *file, char __user *user_buf,
 	return simple_read_from_buffer(user_buf, count, ppos, buf, pos);
 }
 
+static ssize_t
+iwl_dbgfs_bt_tx_prio_write(struct iwl_mvm *mvm, char *buf,
+			   size_t count, loff_t *ppos)
+{
+	u32 bt_tx_prio;
+
+	if (sscanf(buf, "%u", &bt_tx_prio) != 1)
+		return -EINVAL;
+	if (bt_tx_prio > 4)
+		return -EINVAL;
+
+	mvm->bt_tx_prio = bt_tx_prio;
+
+	return count;
+}
+
 #define PRINT_STATS_LE32(_str, _val)					\
 			 pos += scnprintf(buf + pos, bufsz - pos,	\
 					  fmt_table, _str,		\
@@ -1085,6 +1101,7 @@ MVM_DEBUGFS_READ_FILE_OPS(fw_rx_stats);
 MVM_DEBUGFS_READ_FILE_OPS(drv_rx_stats);
 MVM_DEBUGFS_WRITE_FILE_OPS(fw_restart, 10);
 MVM_DEBUGFS_WRITE_FILE_OPS(fw_nmi, 10);
+MVM_DEBUGFS_WRITE_FILE_OPS(bt_tx_prio, 10);
 MVM_DEBUGFS_READ_WRITE_FILE_OPS(scan_ant_rxchain, 8);
 MVM_DEBUGFS_READ_WRITE_FILE_OPS(d0i3_refs, 8);
 
@@ -1126,6 +1143,7 @@ int iwl_mvm_dbgfs_register(struct iwl_mvm *mvm, struct dentry *dbgfs_dir)
 	MVM_DEBUGFS_ADD_FILE(drv_rx_stats, mvm->debugfs_dir, S_IRUSR);
 	MVM_DEBUGFS_ADD_FILE(fw_restart, mvm->debugfs_dir, S_IWUSR);
 	MVM_DEBUGFS_ADD_FILE(fw_nmi, mvm->debugfs_dir, S_IWUSR);
+	MVM_DEBUGFS_ADD_FILE(bt_tx_prio, mvm->debugfs_dir, S_IWUSR);
 	MVM_DEBUGFS_ADD_FILE(scan_ant_rxchain, mvm->debugfs_dir,
 			     S_IWUSR | S_IRUSR);
 	MVM_DEBUGFS_ADD_FILE(prph_reg, mvm->debugfs_dir, S_IWUSR | S_IRUSR);
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-coex.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-coex.h
index 32156d7e2d07..21877e5966a8 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api-coex.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-coex.h
@@ -78,6 +78,7 @@
  * @BT_COEX_NW:
  * @BT_COEX_SYNC2SCO:
  * @BT_COEX_CORUNNING:
+ * @BT_COEX_MPLUT:
  *
  * The COEX_MODE must be set for each command. Even if it is not changed.
  */
@@ -90,6 +91,7 @@ enum iwl_bt_coex_flags {
 	BT_COEX_NW			= 0x3 << BT_COEX_MODE_POS,
 	BT_COEX_SYNC2SCO		= BIT(7),
 	BT_COEX_CORUNNING		= BIT(8),
+	BT_COEX_MPLUT			= BIT(9),
 };
 
 /*
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index cb6dbb140820..d58118241d61 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -611,6 +611,7 @@ struct iwl_mvm {
 	struct iwl_bt_coex_ci_cmd last_bt_ci_cmd;
 	u32 last_ant_isol;
 	u8 last_corun_lut;
+	u8 bt_tx_prio;
 
 	/* Thermal Throttling and CTkill */
 	struct iwl_mvm_tt_mgmt thermal_throttle;
-- 
cgit v1.2.2


From 65d66628500a40e2acbf1546af536801d65e0d14 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Mon, 17 Mar 2014 09:34:29 +0100
Subject: iwlwifi: mvm: remove using max_duration in firmware API

The firmware decided to not implement this API in this way,
so for now remove setting the field completely. This will
allow the firmware to change how to use this field later.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/constants.h |  2 --
 drivers/net/wireless/iwlwifi/mvm/quota.c     | 22 +---------------------
 2 files changed, 1 insertion(+), 23 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/constants.h b/drivers/net/wireless/iwlwifi/mvm/constants.h
index 921b177a92b8..51685693af2e 100644
--- a/drivers/net/wireless/iwlwifi/mvm/constants.h
+++ b/drivers/net/wireless/iwlwifi/mvm/constants.h
@@ -79,8 +79,6 @@
 #define IWL_MVM_PS_SNOOZE_WINDOW		50
 #define IWL_MVM_WOWLAN_PS_SNOOZE_WINDOW		25
 #define IWL_MVM_LOWLAT_QUOTA_MIN_PERCENT	64
-#define IWL_MVM_LOWLAT_SINGLE_BINDING_MAXDUR	24 /* TU */
-#define IWL_MVM_LOWLAT_DUAL_BINDING_MAXDUR	24 /* TU */
 #define IWL_MVM_BT_COEX_SYNC2SCO		1
 #define IWL_MVM_BT_COEX_CORUNNING		1
 #define IWL_MVM_BT_COEX_MPLUT			1
diff --git a/drivers/net/wireless/iwlwifi/mvm/quota.c b/drivers/net/wireless/iwlwifi/mvm/quota.c
index 06d8429be1fb..7ec62efe420b 100644
--- a/drivers/net/wireless/iwlwifi/mvm/quota.c
+++ b/drivers/net/wireless/iwlwifi/mvm/quota.c
@@ -180,7 +180,6 @@ int iwl_mvm_update_quotas(struct iwl_mvm *mvm, struct ieee80211_vif *newvif)
 		.colors = { -1, -1, -1, -1 },
 		.new_vif = newvif,
 	};
-	u32 ll_max_duration;
 
 	lockdep_assert_held(&mvm->mutex);
 
@@ -199,21 +198,6 @@ int iwl_mvm_update_quotas(struct iwl_mvm *mvm, struct ieee80211_vif *newvif)
 		iwl_mvm_quota_iterator(&data, newvif->addr, newvif);
 	}
 
-	switch (data.n_low_latency_bindings) {
-	case 0: /* no low latency - use default */
-		ll_max_duration = 0;
-		break;
-	case 1: /* SingleBindingLowLatencyMode */
-		ll_max_duration = IWL_MVM_LOWLAT_SINGLE_BINDING_MAXDUR;
-		break;
-	case 2: /* DualBindingLowLatencyMode */
-		ll_max_duration = IWL_MVM_LOWLAT_DUAL_BINDING_MAXDUR;
-		break;
-	default: /* MultiBindingLowLatencyMode */
-		ll_max_duration = 0;
-		break;
-	}
-
 	/*
 	 * The FW's scheduling session consists of
 	 * IWL_MVM_MAX_QUOTA fragments. Divide these fragments
@@ -287,11 +271,7 @@ int iwl_mvm_update_quotas(struct iwl_mvm *mvm, struct ieee80211_vif *newvif)
 			  "Binding=%d, quota=%u > max=%u\n",
 			  idx, le32_to_cpu(cmd.quotas[idx].quota), QUOTA_100);
 
-		if (data.n_interfaces[i] && !data.low_latency[i])
-			cmd.quotas[idx].max_duration =
-				cpu_to_le32(ll_max_duration);
-		else
-			cmd.quotas[idx].max_duration = cpu_to_le32(0);
+		cmd.quotas[idx].max_duration = cpu_to_le32(0);
 
 		idx++;
 	}
-- 
cgit v1.2.2


From 8a110d9be1c14a95f502343b8b4783eb3228e1e3 Mon Sep 17 00:00:00 2001
From: Alexander Bondar <alexander.bondar@intel.com>
Date: Wed, 12 Mar 2014 17:31:19 +0200
Subject: iwlwifi: mvm: restructure scan parameters calculation

Some scan parameters should be dependent on traffic conditions.
Centralize conditions verification in one function and obtain
scan max out-of-channel and suspend time in that new function.
Rely on bound interfaces indication instead of association state
to calculate scan parameters. If no bound interfaces use default
values for out-of-channel and suspend time parameters.

Additionally, get rid of NL80211_SCAN_FLAG_LOW_PRIORITY checks
since no use case for this exists so far.

Signed-off-by: Alexander Bondar <alexander.bondar@intel.com>
[reword commit log a bit]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/mac80211.c |  3 +-
 drivers/net/wireless/iwlwifi/mvm/scan.c     | 82 ++++++++++++++---------------
 2 files changed, 41 insertions(+), 44 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index 8414c031e274..dbe6ff8e67b3 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -375,8 +375,7 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm)
 	}
 
 	hw->wiphy->features |= NL80211_FEATURE_P2P_GO_CTWIN |
-			       NL80211_FEATURE_P2P_GO_OPPPS |
-			       NL80211_FEATURE_LOW_PRIORITY_SCAN;
+			       NL80211_FEATURE_P2P_GO_OPPPS;
 
 	mvm->rts_threshold = IEEE80211_MAX_RTS_THRESHOLD;
 
diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c
index 945398ba39b4..ee3f67f5e42b 100644
--- a/drivers/net/wireless/iwlwifi/mvm/scan.c
+++ b/drivers/net/wireless/iwlwifi/mvm/scan.c
@@ -70,9 +70,11 @@
 
 #define IWL_PLCP_QUIET_THRESH 1
 #define IWL_ACTIVE_QUIET_TIME 10
-#define LONG_OUT_TIME_PERIOD 600
-#define SHORT_OUT_TIME_PERIOD 200
-#define SUSPEND_TIME_PERIOD 100
+
+struct iwl_mvm_scan_params {
+	u32 max_out_time;
+	u32 suspend_time;
+};
 
 static inline __le16 iwl_mvm_scan_rx_chain(struct iwl_mvm *mvm)
 {
@@ -90,24 +92,6 @@ static inline __le16 iwl_mvm_scan_rx_chain(struct iwl_mvm *mvm)
 	return cpu_to_le16(rx_chain);
 }
 
-static inline __le32 iwl_mvm_scan_max_out_time(struct ieee80211_vif *vif,
-					       u32 flags, bool is_assoc)
-{
-	if (!is_assoc)
-		return 0;
-	if (flags & NL80211_SCAN_FLAG_LOW_PRIORITY)
-		return cpu_to_le32(ieee80211_tu_to_usec(SHORT_OUT_TIME_PERIOD));
-	return cpu_to_le32(ieee80211_tu_to_usec(LONG_OUT_TIME_PERIOD));
-}
-
-static inline __le32 iwl_mvm_scan_suspend_time(struct ieee80211_vif *vif,
-					       bool is_assoc)
-{
-	if (!is_assoc)
-		return 0;
-	return cpu_to_le32(ieee80211_tu_to_usec(SUSPEND_TIME_PERIOD));
-}
-
 static inline __le32
 iwl_mvm_scan_rxon_flags(struct cfg80211_scan_request *req)
 {
@@ -267,13 +251,30 @@ static u16 iwl_mvm_fill_probe_req(struct ieee80211_mgmt *frame, const u8 *ta,
 	return (u16)len;
 }
 
-static void iwl_mvm_vif_assoc_iterator(void *data, u8 *mac,
-				       struct ieee80211_vif *vif)
+static void iwl_mvm_scan_condition_iterator(void *data, u8 *mac,
+					    struct ieee80211_vif *vif)
 {
-	bool *is_assoc = data;
+	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
+	bool *global_bound = data;
 
-	if (vif->bss_conf.assoc)
-		*is_assoc = true;
+	if (mvmvif->phy_ctxt && mvmvif->phy_ctxt->id < MAX_PHYS)
+		*global_bound = true;
+}
+
+static void iwl_mvm_scan_calc_params(struct iwl_mvm *mvm,
+				     struct iwl_mvm_scan_params *params)
+{
+	bool global_bound = false;
+
+	ieee80211_iterate_active_interfaces_atomic(mvm->hw,
+					    IEEE80211_IFACE_ITER_NORMAL,
+					    iwl_mvm_scan_condition_iterator,
+					    &global_bound);
+	if (!global_bound)
+		return;
+
+	params->suspend_time = ieee80211_tu_to_usec(100);
+	params->max_out_time = ieee80211_tu_to_usec(600);
 }
 
 int iwl_mvm_scan_request(struct iwl_mvm *mvm,
@@ -288,13 +289,13 @@ int iwl_mvm_scan_request(struct iwl_mvm *mvm,
 		.dataflags = { IWL_HCMD_DFL_NOCOPY, },
 	};
 	struct iwl_scan_cmd *cmd = mvm->scan_cmd;
-	bool is_assoc = false;
 	int ret;
 	u32 status;
 	int ssid_len = 0;
 	u8 *ssid = NULL;
 	bool basic_ssid = !(mvm->fw->ucode_capa.flags &
 			   IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID);
+	struct iwl_mvm_scan_params params = {};
 
 	lockdep_assert_held(&mvm->mutex);
 	BUG_ON(mvm->scan_cmd == NULL);
@@ -304,17 +305,16 @@ int iwl_mvm_scan_request(struct iwl_mvm *mvm,
 	memset(cmd, 0, sizeof(struct iwl_scan_cmd) +
 	       mvm->fw->ucode_capa.max_probe_length +
 	       (MAX_NUM_SCAN_CHANNELS * sizeof(struct iwl_scan_channel)));
-	ieee80211_iterate_active_interfaces_atomic(mvm->hw,
-					    IEEE80211_IFACE_ITER_NORMAL,
-					    iwl_mvm_vif_assoc_iterator,
-					    &is_assoc);
+
 	cmd->channel_count = (u8)req->n_channels;
 	cmd->quiet_time = cpu_to_le16(IWL_ACTIVE_QUIET_TIME);
 	cmd->quiet_plcp_th = cpu_to_le16(IWL_PLCP_QUIET_THRESH);
 	cmd->rxchain_sel_flags = iwl_mvm_scan_rx_chain(mvm);
-	cmd->max_out_time = iwl_mvm_scan_max_out_time(vif, req->flags,
-						      is_assoc);
-	cmd->suspend_time = iwl_mvm_scan_suspend_time(vif, is_assoc);
+
+	iwl_mvm_scan_calc_params(mvm, &params);
+	cmd->max_out_time = cpu_to_le32(params.max_out_time);
+	cmd->suspend_time = cpu_to_le32(params.suspend_time);
+
 	cmd->rxon_flags = iwl_mvm_scan_rxon_flags(req);
 	cmd->filter_flags = cpu_to_le32(MAC_FILTER_ACCEPT_GRP |
 					MAC_FILTER_IN_BEACON);
@@ -556,12 +556,8 @@ static void iwl_build_scan_cmd(struct iwl_mvm *mvm,
 			       struct cfg80211_sched_scan_request *req,
 			       struct iwl_scan_offload_cmd *scan)
 {
-	bool is_assoc = false;
+	struct iwl_mvm_scan_params params = {};
 
-	ieee80211_iterate_active_interfaces_atomic(mvm->hw,
-					    IEEE80211_IFACE_ITER_NORMAL,
-					    iwl_mvm_vif_assoc_iterator,
-					    &is_assoc);
 	scan->channel_count =
 		mvm->nvm_data->bands[IEEE80211_BAND_2GHZ].n_channels +
 		mvm->nvm_data->bands[IEEE80211_BAND_5GHZ].n_channels;
@@ -569,9 +565,11 @@ static void iwl_build_scan_cmd(struct iwl_mvm *mvm,
 	scan->quiet_plcp_th = cpu_to_le16(IWL_PLCP_QUIET_THRESH);
 	scan->good_CRC_th = IWL_GOOD_CRC_TH_DEFAULT;
 	scan->rx_chain = iwl_mvm_scan_rx_chain(mvm);
-	scan->max_out_time = iwl_mvm_scan_max_out_time(vif, req->flags,
-						       is_assoc);
-	scan->suspend_time = iwl_mvm_scan_suspend_time(vif, is_assoc);
+
+	iwl_mvm_scan_calc_params(mvm, &params);
+	scan->max_out_time = cpu_to_le32(params.max_out_time);
+	scan->suspend_time = cpu_to_le32(params.suspend_time);
+
 	scan->filter_flags |= cpu_to_le32(MAC_FILTER_ACCEPT_GRP |
 					  MAC_FILTER_IN_BEACON);
 	scan->scan_type = cpu_to_le32(SCAN_TYPE_BACKGROUND);
-- 
cgit v1.2.2


From 50df8a3065404b9b953b1ae1455dd991e04a9ab7 Mon Sep 17 00:00:00 2001
From: Alexander Bondar <alexander.bondar@intel.com>
Date: Wed, 12 Mar 2014 20:30:51 +0200
Subject: iwlwifi: mvm: configure low latency dependent scan parameters

In case of system low latency configure passive scan to be fragmented.
Set the following scan parameters for both immediate and scheduled scan:
 - passive scan fragment duration = 20ms
 - out-of-channel time = 70ms
 - suspend time = 105ms
Restructure channel's active/passive dwell time configuration to better
suit the above change.

The idea is that under low latency traffic passive scan is fragmented,
i.e. that dwell on a particular channel will be fragmented. Each
fragment dwell time is 20ms and fragments period is 105ms. Skipping to
next channel will be delayed by the same period (105ms). So suspend_time
parameter describing both fragments and channels skipping periods is set
to 105ms. This value is chosen so that overall passive scan duration
will not be too long. Max_out_time in this case is set to 70ms, so for
active scanning operating channel will be left for 70ms while for
passive still for 20ms (fragment dwell).

Signed-off-by: Alexander Bondar <alexander.bondar@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/mvm.h   |   2 +
 drivers/net/wireless/iwlwifi/mvm/scan.c  | 108 +++++++++++++++++++++++--------
 drivers/net/wireless/iwlwifi/mvm/utils.c |  19 ++++++
 3 files changed, 101 insertions(+), 28 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index d58118241d61..abfa5676762b 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -984,6 +984,8 @@ void iwl_mvm_update_smps(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
 /* Low latency */
 int iwl_mvm_update_low_latency(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
 			       bool value);
+/* get SystemLowLatencyMode - only needed for beacon threshold? */
+bool iwl_mvm_low_latency(struct iwl_mvm *mvm);
 /* get VMACLowLatencyMode */
 static inline bool iwl_mvm_vif_low_latency(struct iwl_mvm_vif *mvmvif)
 {
diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c
index ee3f67f5e42b..c91dc8498852 100644
--- a/drivers/net/wireless/iwlwifi/mvm/scan.c
+++ b/drivers/net/wireless/iwlwifi/mvm/scan.c
@@ -74,6 +74,11 @@
 struct iwl_mvm_scan_params {
 	u32 max_out_time;
 	u32 suspend_time;
+	bool passive_fragmented;
+	struct _dwell {
+		u16 passive;
+		u16 active;
+	} dwell[IEEE80211_NUM_BANDS];
 };
 
 static inline __le16 iwl_mvm_scan_rx_chain(struct iwl_mvm *mvm)
@@ -165,15 +170,14 @@ static u16 iwl_mvm_get_passive_dwell(enum ieee80211_band band)
 
 static void iwl_mvm_scan_fill_channels(struct iwl_scan_cmd *cmd,
 				       struct cfg80211_scan_request *req,
-				       bool basic_ssid)
+				       bool basic_ssid,
+				       struct iwl_mvm_scan_params *params)
 {
-	u16 passive_dwell = iwl_mvm_get_passive_dwell(req->channels[0]->band);
-	u16 active_dwell = iwl_mvm_get_active_dwell(req->channels[0]->band,
-						    req->n_ssids);
 	struct iwl_scan_channel *chan = (struct iwl_scan_channel *)
 		(cmd->data + le16_to_cpu(cmd->tx_cmd.len));
 	int i;
 	int type = BIT(req->n_ssids) - 1;
+	enum ieee80211_band band = req->channels[0]->band;
 
 	if (!basic_ssid)
 		type |= BIT(req->n_ssids);
@@ -183,8 +187,8 @@ static void iwl_mvm_scan_fill_channels(struct iwl_scan_cmd *cmd,
 		chan->type = cpu_to_le32(type);
 		if (req->channels[i]->flags & IEEE80211_CHAN_NO_IR)
 			chan->type &= cpu_to_le32(~SCAN_CHANNEL_TYPE_ACTIVE);
-		chan->active_dwell = cpu_to_le16(active_dwell);
-		chan->passive_dwell = cpu_to_le16(passive_dwell);
+		chan->active_dwell = cpu_to_le16(params->dwell[band].active);
+		chan->passive_dwell = cpu_to_le16(params->dwell[band].passive);
 		chan->iteration_count = cpu_to_le16(1);
 		chan++;
 	}
@@ -262,19 +266,65 @@ static void iwl_mvm_scan_condition_iterator(void *data, u8 *mac,
 }
 
 static void iwl_mvm_scan_calc_params(struct iwl_mvm *mvm,
+				     struct ieee80211_vif *vif,
+				     int n_ssids,
 				     struct iwl_mvm_scan_params *params)
 {
 	bool global_bound = false;
+	enum ieee80211_band band;
 
 	ieee80211_iterate_active_interfaces_atomic(mvm->hw,
 					    IEEE80211_IFACE_ITER_NORMAL,
 					    iwl_mvm_scan_condition_iterator,
 					    &global_bound);
-	if (!global_bound)
-		return;
+	/*
+	 * Under low latency traffic passive scan is fragmented meaning
+	 * that dwell on a particular channel will be fragmented. Each fragment
+	 * dwell time is 20ms and fragments period is 105ms. Skipping to next
+	 * channel will be delayed by the same period - 105ms. So suspend_time
+	 * parameter describing both fragments and channels skipping periods is
+	 * set to 105ms. This value is chosen so that overall passive scan
+	 * duration will not be too long. Max_out_time in this case is set to
+	 * 70ms, so for active scanning operating channel will be left for 70ms
+	 * while for passive still for 20ms (fragment dwell).
+	 */
+	if (global_bound) {
+		if (!iwl_mvm_low_latency(mvm)) {
+			params->suspend_time = ieee80211_tu_to_usec(100);
+			params->max_out_time = ieee80211_tu_to_usec(600);
+		} else {
+			params->suspend_time = ieee80211_tu_to_usec(105);
+			/* P2P doesn't support fragmented passive scan, so
+			 * configure max_out_time to be at least longest dwell
+			 * time for passive scan.
+			 */
+			if (vif->type == NL80211_IFTYPE_STATION && !vif->p2p) {
+				params->max_out_time = ieee80211_tu_to_usec(70);
+				params->passive_fragmented = true;
+			} else {
+				u32 passive_dwell;
+
+				/*
+				 * Use band G so that passive channel dwell time
+				 * will be assigned with maximum value.
+				 */
+				band = IEEE80211_BAND_2GHZ;
+				passive_dwell = iwl_mvm_get_passive_dwell(band);
+				params->max_out_time =
+					ieee80211_tu_to_usec(passive_dwell);
+			}
+		}
+	}
 
-	params->suspend_time = ieee80211_tu_to_usec(100);
-	params->max_out_time = ieee80211_tu_to_usec(600);
+	for (band = IEEE80211_BAND_2GHZ; band < IEEE80211_NUM_BANDS; band++) {
+		if (params->passive_fragmented)
+			params->dwell[band].passive = 20;
+		else
+			params->dwell[band].passive =
+				iwl_mvm_get_passive_dwell(band);
+		params->dwell[band].active = iwl_mvm_get_active_dwell(band,
+								      n_ssids);
+	}
 }
 
 int iwl_mvm_scan_request(struct iwl_mvm *mvm,
@@ -311,9 +361,11 @@ int iwl_mvm_scan_request(struct iwl_mvm *mvm,
 	cmd->quiet_plcp_th = cpu_to_le16(IWL_PLCP_QUIET_THRESH);
 	cmd->rxchain_sel_flags = iwl_mvm_scan_rx_chain(mvm);
 
-	iwl_mvm_scan_calc_params(mvm, &params);
+	iwl_mvm_scan_calc_params(mvm, vif, req->n_ssids, &params);
 	cmd->max_out_time = cpu_to_le32(params.max_out_time);
 	cmd->suspend_time = cpu_to_le32(params.suspend_time);
+	if (params.passive_fragmented)
+		cmd->scan_flags |= SCAN_FLAGS_FRAGMENTED_SCAN;
 
 	cmd->rxon_flags = iwl_mvm_scan_rxon_flags(req);
 	cmd->filter_flags = cpu_to_le32(MAC_FILTER_ACCEPT_GRP |
@@ -360,7 +412,7 @@ int iwl_mvm_scan_request(struct iwl_mvm *mvm,
 			    req->ie, req->ie_len,
 			    mvm->fw->ucode_capa.max_probe_length));
 
-	iwl_mvm_scan_fill_channels(cmd, req, basic_ssid);
+	iwl_mvm_scan_fill_channels(cmd, req, basic_ssid, &params);
 
 	cmd->len = cpu_to_le16(sizeof(struct iwl_scan_cmd) +
 		le16_to_cpu(cmd->tx_cmd.len) +
@@ -554,10 +606,9 @@ static void iwl_scan_offload_build_tx_cmd(struct iwl_mvm *mvm,
 static void iwl_build_scan_cmd(struct iwl_mvm *mvm,
 			       struct ieee80211_vif *vif,
 			       struct cfg80211_sched_scan_request *req,
-			       struct iwl_scan_offload_cmd *scan)
+			       struct iwl_scan_offload_cmd *scan,
+			       struct iwl_mvm_scan_params *params)
 {
-	struct iwl_mvm_scan_params params = {};
-
 	scan->channel_count =
 		mvm->nvm_data->bands[IEEE80211_BAND_2GHZ].n_channels +
 		mvm->nvm_data->bands[IEEE80211_BAND_5GHZ].n_channels;
@@ -566,14 +617,16 @@ static void iwl_build_scan_cmd(struct iwl_mvm *mvm,
 	scan->good_CRC_th = IWL_GOOD_CRC_TH_DEFAULT;
 	scan->rx_chain = iwl_mvm_scan_rx_chain(mvm);
 
-	iwl_mvm_scan_calc_params(mvm, &params);
-	scan->max_out_time = cpu_to_le32(params.max_out_time);
-	scan->suspend_time = cpu_to_le32(params.suspend_time);
+	scan->max_out_time = cpu_to_le32(params->max_out_time);
+	scan->suspend_time = cpu_to_le32(params->suspend_time);
 
 	scan->filter_flags |= cpu_to_le32(MAC_FILTER_ACCEPT_GRP |
 					  MAC_FILTER_IN_BEACON);
 	scan->scan_type = cpu_to_le32(SCAN_TYPE_BACKGROUND);
 	scan->rep_count = cpu_to_le32(1);
+
+	if (params->passive_fragmented)
+		scan->scan_flags |= SCAN_FLAGS_FRAGMENTED_SCAN;
 }
 
 static int iwl_ssid_exist(u8 *ssid, u8 ssid_len, struct iwl_ssid_ie *ssid_list)
@@ -638,12 +691,11 @@ static void iwl_build_channel_cfg(struct iwl_mvm *mvm,
 				  struct iwl_scan_channel_cfg *channels,
 				  enum ieee80211_band band,
 				  int *head, int *tail,
-				  u32 ssid_bitmap)
+				  u32 ssid_bitmap,
+				  struct iwl_mvm_scan_params *params)
 {
 	struct ieee80211_supported_band *s_band;
-	int n_probes = req->n_ssids;
 	int n_channels = req->n_channels;
-	u8 active_dwell, passive_dwell;
 	int i, j, index = 0;
 	bool partial;
 
@@ -653,8 +705,6 @@ static void iwl_build_channel_cfg(struct iwl_mvm *mvm,
 	 * to scan. So add requested channels to head of the list and others to
 	 * the end.
 	*/
-	active_dwell = iwl_mvm_get_active_dwell(band, n_probes);
-	passive_dwell = iwl_mvm_get_passive_dwell(band);
 	s_band = &mvm->nvm_data->bands[band];
 
 	for (i = 0; i < s_band->n_channels && *head <= *tail; i++) {
@@ -678,8 +728,8 @@ static void iwl_build_channel_cfg(struct iwl_mvm *mvm,
 		channels->channel_number[index] =
 			cpu_to_le16(ieee80211_frequency_to_channel(
 					s_band->channels[i].center_freq));
-		channels->dwell_time[index][0] = active_dwell;
-		channels->dwell_time[index][1] = passive_dwell;
+		channels->dwell_time[index][0] = params->dwell[band].active;
+		channels->dwell_time[index][1] = params->dwell[band].passive;
 
 		channels->iter_count[index] = cpu_to_le16(1);
 		channels->iter_interval[index] = 0;
@@ -721,6 +771,7 @@ int iwl_mvm_config_sched_scan(struct iwl_mvm *mvm,
 		.id = SCAN_OFFLOAD_CONFIG_CMD,
 		.flags = CMD_SYNC,
 	};
+	struct iwl_mvm_scan_params params = {};
 
 	lockdep_assert_held(&mvm->mutex);
 
@@ -731,7 +782,8 @@ int iwl_mvm_config_sched_scan(struct iwl_mvm *mvm,
 	if (!scan_cfg)
 		return -ENOMEM;
 
-	iwl_build_scan_cmd(mvm, vif, req, &scan_cfg->scan_cmd);
+	iwl_mvm_scan_calc_params(mvm, vif, req->n_ssids, &params);
+	iwl_build_scan_cmd(mvm, vif, req, &scan_cfg->scan_cmd, &params);
 	scan_cfg->scan_cmd.len = cpu_to_le16(cmd_len);
 
 	iwl_scan_offload_build_ssid(req, &scan_cfg->scan_cmd, &ssid_bitmap);
@@ -743,7 +795,7 @@ int iwl_mvm_config_sched_scan(struct iwl_mvm *mvm,
 					      scan_cfg->data);
 		iwl_build_channel_cfg(mvm, req, &scan_cfg->channel_cfg,
 				      IEEE80211_BAND_2GHZ, &head, &tail,
-				      ssid_bitmap);
+				      ssid_bitmap, &params);
 	}
 	if (band_5ghz) {
 		iwl_scan_offload_build_tx_cmd(mvm, vif, ies,
@@ -753,7 +805,7 @@ int iwl_mvm_config_sched_scan(struct iwl_mvm *mvm,
 						SCAN_OFFLOAD_PROBE_REQ_SIZE);
 		iwl_build_channel_cfg(mvm, req, &scan_cfg->channel_cfg,
 				      IEEE80211_BAND_5GHZ, &head, &tail,
-				      ssid_bitmap);
+				      ssid_bitmap, &params);
 	}
 
 	cmd.data[0] = scan_cfg;
diff --git a/drivers/net/wireless/iwlwifi/mvm/utils.c b/drivers/net/wireless/iwlwifi/mvm/utils.c
index e9de033d6b9e..c28da90cd347 100644
--- a/drivers/net/wireless/iwlwifi/mvm/utils.c
+++ b/drivers/net/wireless/iwlwifi/mvm/utils.c
@@ -622,3 +622,22 @@ int iwl_mvm_update_low_latency(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
 
 	return iwl_mvm_power_update_mac(mvm, vif);
 }
+
+static void iwl_mvm_ll_iter(void *_data, u8 *mac, struct ieee80211_vif *vif)
+{
+	bool *result = _data;
+
+	if (iwl_mvm_vif_low_latency(iwl_mvm_vif_from_mac80211(vif)))
+		*result = true;
+}
+
+bool iwl_mvm_low_latency(struct iwl_mvm *mvm)
+{
+	bool result = false;
+
+	ieee80211_iterate_active_interfaces_atomic(
+			mvm->hw, IEEE80211_IFACE_ITER_NORMAL,
+			iwl_mvm_ll_iter, &result);
+
+	return result;
+}
-- 
cgit v1.2.2


From f718c2df22b0059a0856b16562dea1b9ed28b23f Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Tue, 18 Mar 2014 14:53:18 +0200
Subject: iwlwifi: mvm: fix theoretical NULL ptr dereference

mvmsta could have been NULL / ERR.

Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c b/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c
index f64e972191eb..9b59e1d7ae71 100644
--- a/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c
+++ b/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c
@@ -312,6 +312,11 @@ static ssize_t iwl_dbgfs_reduced_txp_write(struct ieee80211_vif *vif,
 	mutex_lock(&mvm->mutex);
 
 	mvmsta = iwl_mvm_sta_from_staid_protected(mvm, mvmvif->ap_sta_id);
+	if (IS_ERR_OR_NULL(mvmsta)) {
+		mutex_unlock(&mvm->mutex);
+		return -ENOTCONN;
+	}
+
 	mvmsta->bt_reduced_txpower_dbg = false;
 	ret = iwl_mvm_bt_coex_reduced_txp(mvm, mvmvif->ap_sta_id,
 					  reduced_tx_power);
-- 
cgit v1.2.2


From d966211487f2a28ed656899c7f35f674b5ea38ad Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Tue, 18 Mar 2014 14:13:06 +0100
Subject: iwlwifi: mvm: remove spurious blank line

Remove a spurious blank line in the quota code.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/quota.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/quota.c b/drivers/net/wireless/iwlwifi/mvm/quota.c
index 7ec62efe420b..35e86e06dffd 100644
--- a/drivers/net/wireless/iwlwifi/mvm/quota.c
+++ b/drivers/net/wireless/iwlwifi/mvm/quota.c
@@ -262,7 +262,6 @@ int iwl_mvm_update_quotas(struct iwl_mvm *mvm, struct ieee80211_vif *newvif)
 			 * binding.
 			 */
 			cmd.quotas[idx].quota = cpu_to_le32(QUOTA_LOWLAT_MIN);
-
 		else
 			cmd.quotas[idx].quota =
 				cpu_to_le32(quota * data.n_interfaces[i]);
-- 
cgit v1.2.2


From 3510aea44ec0e5618f718c0952fe7bb0292bb2c4 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Tue, 18 Mar 2014 10:21:02 +0100
Subject: iwlwifi: mvm: ignore unchanged low-latency flag

If the low-latency update is called but there's no change then
ignore the update instead of triggering all the required work.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/utils.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/utils.c b/drivers/net/wireless/iwlwifi/mvm/utils.c
index c28da90cd347..d619851745a1 100644
--- a/drivers/net/wireless/iwlwifi/mvm/utils.c
+++ b/drivers/net/wireless/iwlwifi/mvm/utils.c
@@ -612,6 +612,9 @@ int iwl_mvm_update_low_latency(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
 
 	lockdep_assert_held(&mvm->mutex);
 
+	if (mvmvif->low_latency == value)
+		return 0;
+
 	mvmvif->low_latency = value;
 
 	res = iwl_mvm_update_quotas(mvm, NULL);
-- 
cgit v1.2.2


From a82dda6cd492b8c88952be6f6527f3656f7ac585 Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Tue, 18 Mar 2014 16:32:45 +0200
Subject: iwlwifi: mvm: disable uAPSD due to bugs in the firmware

The current firmware advertises support for uAPSD, but
critical bugs force us to disable the feature.
When a fixed firmware will be available, we will be able to
re-enable uAPSD.

Cc: <stable@vger.kernel.org> [3.13+]
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/mac80211.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index dbe6ff8e67b3..110bb3f61397 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -295,7 +295,7 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm)
 	    !iwlwifi_mod_params.sw_crypto)
 		hw->flags |= IEEE80211_HW_MFP_CAPABLE;
 
-	if (mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT) {
+	if (0 && mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT) {
 		hw->flags |= IEEE80211_HW_SUPPORTS_UAPSD;
 		hw->uapsd_queues = IWL_UAPSD_AC_INFO;
 		hw->uapsd_max_sp_len = IWL_UAPSD_MAX_SP;
-- 
cgit v1.2.2


From e76070f2e0b8db1162f9537924d0929d6552b4d3 Mon Sep 17 00:00:00 2001
From: wangweidong <wangweidong1@huawei.com>
Date: Mon, 17 Mar 2014 15:52:17 +0800
Subject: via: fix a punctuation typo

In generic, after an assignment, we use ';' instead of ','.
Although, it won't hurt.

Signed-off-by: Wang Weidong <wangweidong1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/via/via-rhine.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/via/via-rhine.c b/drivers/net/ethernet/via/via-rhine.c
index 5bc1a2d02dc1..9d93fa120578 100644
--- a/drivers/net/ethernet/via/via-rhine.c
+++ b/drivers/net/ethernet/via/via-rhine.c
@@ -1022,7 +1022,7 @@ static int rhine_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	/* The chip-specific entries in the device structure. */
 	dev->netdev_ops = &rhine_netdev_ops;
-	dev->ethtool_ops = &netdev_ethtool_ops,
+	dev->ethtool_ops = &netdev_ethtool_ops;
 	dev->watchdog_timeo = TX_TIMEOUT;
 
 	netif_napi_add(dev, &rp->napi, rhine_napipoll, 64);
-- 
cgit v1.2.2


From 2df3b0b7869688c511eada859f1ee3dc13c7cec6 Mon Sep 17 00:00:00 2001
From: "John W. Linville" <linville@tuxdriver.com>
Date: Tue, 18 Mar 2014 16:35:45 -0400
Subject: rsi: make rsi_dbg a regular function

This is to address reports of this:

In file included from drivers/net/wireless/rsi/rsi_mgmt.h:22:0,
                 from drivers/net/wireless/rsi/rsi_91x_core.c:17:
drivers/net/wireless/rsi/rsi_91x_core.c: In function 'rsi_dbg':
drivers/net/wireless/rsi/rsi_main.h:44:20: error: function 'rsi_dbg' can never be inlined because it uses variable argument lists
 static inline void rsi_dbg(u32 zone, const char *fmt, ...)

Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rsi/rsi_91x_main.c | 23 +++++++++++++++++++++++
 drivers/net/wireless/rsi/rsi_main.h     | 16 +---------------
 2 files changed, 24 insertions(+), 15 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rsi/rsi_91x_main.c b/drivers/net/wireless/rsi/rsi_91x_main.c
index 410a4a423578..7367be4a58ad 100644
--- a/drivers/net/wireless/rsi/rsi_91x_main.c
+++ b/drivers/net/wireless/rsi/rsi_91x_main.c
@@ -31,6 +31,29 @@ u32 rsi_zone_enabled = /* INFO_ZONE |
 			0;
 EXPORT_SYMBOL_GPL(rsi_zone_enabled);
 
+/**
+ * rsi_dbg() - This function outputs informational messages.
+ * @zone: Zone of interest for output message.
+ * @fmt: printf-style format for output message.
+ *
+ * Return: none
+ */
+void rsi_dbg(u32 zone, const char *fmt, ...)
+{
+	struct va_format vaf;
+	va_list args;
+
+	va_start(args, fmt);
+
+	vaf.fmt = fmt;
+	vaf.va = &args;
+
+	if (zone & rsi_zone_enabled)
+		pr_info("%pV", &vaf);
+	va_end(args);
+}
+EXPORT_SYMBOL_GPL(rsi_dbg);
+
 /**
  * rsi_prepare_skb() - This function prepares the skb.
  * @common: Pointer to the driver private structure.
diff --git a/drivers/net/wireless/rsi/rsi_main.h b/drivers/net/wireless/rsi/rsi_main.h
index bebdc2ae6c5b..e97e6ad07562 100644
--- a/drivers/net/wireless/rsi/rsi_main.h
+++ b/drivers/net/wireless/rsi/rsi_main.h
@@ -40,21 +40,7 @@
 #define FSM_MAC_INIT_DONE               6
 
 extern u32 rsi_zone_enabled;
-
-static inline void rsi_dbg(u32 zone, const char *fmt, ...)
-{
-	struct va_format vaf;
-	va_list args;
-
-	va_start(args, fmt);
-
-	vaf.fmt = fmt;
-	vaf.va = &args;
-
-	if (zone & rsi_zone_enabled)
-		pr_info("%pV", &vaf);
-	va_end(args);
-}
+extern void rsi_dbg(u32 zone, const char *fmt, ...);
 
 #define RSI_MAX_VIFS                    1
 #define NUM_EDCA_QUEUES                 4
-- 
cgit v1.2.2


From 192c80a2499cf2571924081c646262036d841484 Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Wed, 19 Mar 2014 08:25:05 +0200
Subject: iwlwifi: mvm: add missing include

This fixes the build for powerpc:

After merging the final tree, today's linux-next build (powerpc allyesconfig)
failed like this:

drivers/net/wireless/iwlwifi/mvm/debugfs.c: In function 'iwl_dbgfs_fw_error_dump_release':
drivers/net/wireless/iwlwifi/mvm/debugfs.c:161:2: error: implicit declaration of function 'vfree' [-Werror=implicit-function-declaration]
  vfree(file->private_data);
  ^

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/debugfs.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/mvm/debugfs.c b/drivers/net/wireless/iwlwifi/mvm/debugfs.c
index 2566fa9913ef..1b52deea6081 100644
--- a/drivers/net/wireless/iwlwifi/mvm/debugfs.c
+++ b/drivers/net/wireless/iwlwifi/mvm/debugfs.c
@@ -60,6 +60,8 @@
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  *****************************************************************************/
+#include <linux/vmalloc.h>
+
 #include "mvm.h"
 #include "sta.h"
 #include "iwl-io.h"
-- 
cgit v1.2.2


From 8ace189d1ae363f02a58150760d3e6b2c813f8aa Mon Sep 17 00:00:00 2001
From: Andrea Merello <andrea.merello@gmail.com>
Date: Mon, 17 Mar 2014 19:52:42 +0100
Subject: rtl818x: remove unused conf_erp callback from RF ops struct

The ERP configuration is now done outside RF code in both rtl8180
and rtl8187 drivers.

The conf_erp callback in common RF ops struct is now useless.
Remove it.

Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl818x.h | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtl818x/rtl818x.h b/drivers/net/wireless/rtl818x/rtl818x.h
index fa7f7f61ea26..1815b15d03b1 100644
--- a/drivers/net/wireless/rtl818x/rtl818x.h
+++ b/drivers/net/wireless/rtl818x/rtl818x.h
@@ -192,7 +192,6 @@ struct rtl818x_rf_ops {
 	void (*init)(struct ieee80211_hw *);
 	void (*stop)(struct ieee80211_hw *);
 	void (*set_chan)(struct ieee80211_hw *, struct ieee80211_conf *);
-	void (*conf_erp)(struct ieee80211_hw *, struct ieee80211_bss_conf *);
 	u8 (*calc_rssi)(u8 agc, u8 sq);
 };
 
-- 
cgit v1.2.2


From 5fe1b76a9fac5224ff31fc3bce62ba273b65ced1 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Tue, 18 Mar 2014 17:59:47 -0700
Subject: rsi: Add pr_fmt,__printf, fix format & arg mismatch

Emit a prefix for the rsi_dbg messages.

Fix the format and argument mismatch and add
__printf(2, 3) to try to avoid more.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rsi/rsi_91x_main.c | 2 ++
 drivers/net/wireless/rsi/rsi_91x_mgmt.c | 3 ++-
 drivers/net/wireless/rsi/rsi_main.h     | 2 +-
 3 files changed, 5 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rsi/rsi_91x_main.c b/drivers/net/wireless/rsi/rsi_91x_main.c
index 7367be4a58ad..8810862ae826 100644
--- a/drivers/net/wireless/rsi/rsi_91x_main.c
+++ b/drivers/net/wireless/rsi/rsi_91x_main.c
@@ -14,6 +14,8 @@
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/firmware.h>
 #include "rsi_mgmt.h"
diff --git a/drivers/net/wireless/rsi/rsi_91x_mgmt.c b/drivers/net/wireless/rsi/rsi_91x_mgmt.c
index f09c72ef55d5..ef37d4b27bd4 100644
--- a/drivers/net/wireless/rsi/rsi_91x_mgmt.c
+++ b/drivers/net/wireless/rsi/rsi_91x_mgmt.c
@@ -393,7 +393,8 @@ static int rsi_mgmt_pkt_to_core(struct rsi_common *common,
 
 		msg_len -= pad_bytes;
 		if ((msg_len <= 0) || (!msg)) {
-			rsi_dbg(MGMT_RX_ZONE, "Invalid rx msg of len = %d\n",
+			rsi_dbg(MGMT_RX_ZONE,
+				"%s: Invalid rx msg of len = %d\n",
 				__func__, msg_len);
 			return -EINVAL;
 		}
diff --git a/drivers/net/wireless/rsi/rsi_main.h b/drivers/net/wireless/rsi/rsi_main.h
index e97e6ad07562..2cb73e7edb98 100644
--- a/drivers/net/wireless/rsi/rsi_main.h
+++ b/drivers/net/wireless/rsi/rsi_main.h
@@ -40,7 +40,7 @@
 #define FSM_MAC_INIT_DONE               6
 
 extern u32 rsi_zone_enabled;
-extern void rsi_dbg(u32 zone, const char *fmt, ...);
+extern __printf(2, 3) void rsi_dbg(u32 zone, const char *fmt, ...);
 
 #define RSI_MAX_VIFS                    1
 #define NUM_EDCA_QUEUES                 4
-- 
cgit v1.2.2


From cc5c1afb1ed6318cdb3f92b7aa936564c4427f28 Mon Sep 17 00:00:00 2001
From: Avinash Patil <patila@marvell.com>
Date: Tue, 18 Mar 2014 22:19:16 -0700
Subject: mwifiex: handle extended scan event for AP interface

Stations associated to mwifiex AP would not be able to ping AP
after scan was issued on AP interface. This happened because
there was no handling of extended scan event in AP. This patch
adds this handling and fixes ping failure issue.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/uap_event.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/uap_event.c b/drivers/net/wireless/mwifiex/uap_event.c
index ae50e916d8f2..92e77a398ecf 100644
--- a/drivers/net/wireless/mwifiex/uap_event.c
+++ b/drivers/net/wireless/mwifiex/uap_event.c
@@ -166,6 +166,12 @@ int mwifiex_process_uap_event(struct mwifiex_private *priv)
 			mwifiex_11n_ba_stream_timeout(priv, ba_timeout);
 		}
 		break;
+	case EVENT_EXT_SCAN_REPORT:
+		dev_dbg(adapter->dev, "event: EXT_SCAN Report\n");
+		if (adapter->ext_scan)
+			return mwifiex_handle_event_ext_scan_report(priv,
+						adapter->event_skb->data);
+		break;
 	default:
 		dev_dbg(adapter->dev, "event: unknown event id: %#x\n",
 			eventcause);
-- 
cgit v1.2.2


From c4bc980f1b34a8c172b3812e8c946368c730bddd Mon Sep 17 00:00:00 2001
From: Avinash Patil <patila@marvell.com>
Date: Tue, 18 Mar 2014 22:19:17 -0700
Subject: mwifiex: add support for sleep cookie in PCIe

This patch adds support to read sleep cookie for command
response before accessing buffer.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/pcie.c | 26 ++++++++++++++++++++++++++
 drivers/net/wireless/mwifiex/pcie.h |  2 ++
 2 files changed, 28 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/pcie.c b/drivers/net/wireless/mwifiex/pcie.c
index 9f1683b5f28f..57c353a94b29 100644
--- a/drivers/net/wireless/mwifiex/pcie.c
+++ b/drivers/net/wireless/mwifiex/pcie.c
@@ -327,6 +327,30 @@ static void mwifiex_pcie_dev_wakeup_delay(struct mwifiex_adapter *adapter)
 	return;
 }
 
+static void mwifiex_delay_for_sleep_cookie(struct mwifiex_adapter *adapter,
+					   u32 max_delay_loop_cnt)
+{
+	struct pcie_service_card *card = adapter->card;
+	u8 *buffer;
+	u32 sleep_cookie, count;
+
+	for (count = 0; count < max_delay_loop_cnt; count++) {
+		buffer = card->cmdrsp_buf->data - INTF_HEADER_LEN;
+		sleep_cookie = *(u32 *)buffer;
+
+		if (sleep_cookie == MWIFIEX_DEF_SLEEP_COOKIE) {
+			dev_dbg(adapter->dev,
+				"sleep cookie found at count %d\n", count);
+			break;
+		}
+		usleep_range(20, 30);
+	}
+
+	if (count >= max_delay_loop_cnt)
+		dev_dbg(adapter->dev,
+			"max count reached while accessing sleep cookie\n");
+}
+
 /* This function wakes up the card by reading fw_status register. */
 static int mwifiex_pm_wakeup_card(struct mwifiex_adapter *adapter)
 {
@@ -1539,6 +1563,8 @@ static int mwifiex_pcie_process_cmd_complete(struct mwifiex_adapter *adapter)
 					 "Write register failed\n");
 				return -1;
 			}
+			mwifiex_delay_for_sleep_cookie(adapter,
+						       MWIFIEX_MAX_DELAY_COUNT);
 			while (reg->sleep_cookie && (count++ < 10) &&
 			       mwifiex_pcie_ok_to_access_hw(adapter))
 				usleep_range(50, 60);
diff --git a/drivers/net/wireless/mwifiex/pcie.h b/drivers/net/wireless/mwifiex/pcie.h
index 193af75bf582..e8ec561f8a64 100644
--- a/drivers/net/wireless/mwifiex/pcie.h
+++ b/drivers/net/wireless/mwifiex/pcie.h
@@ -97,6 +97,8 @@
 #define MWIFIEX_PCIE_BLOCK_SIZE_FW_DNLD		256
 /* FW awake cookie after FW ready */
 #define FW_AWAKE_COOKIE						(0xAA55AA55)
+#define MWIFIEX_DEF_SLEEP_COOKIE			0xBEEFBEEF
+#define MWIFIEX_MAX_DELAY_COUNT				5
 
 struct mwifiex_pcie_card_reg {
 	u16 cmd_addr_lo;
-- 
cgit v1.2.2


From 474a41e94dfc85167e1761bfbb8bf180f90633b2 Mon Sep 17 00:00:00 2001
From: Maithili Hinge <maithili@marvell.com>
Date: Tue, 18 Mar 2014 22:24:10 -0700
Subject: mwifiex: update MCS set as per RX-STBC bit from hostapd

To set AP in 1X1 or 2X2 mode through hostapd, we need to set
RX-STBC* in hostapd.conf file. Depending upon RX-STBC bit in
ht_cap IE received from hostapd, we need to update mcs set in
bss_cfg appropriately before starting AP.

Signed-off-by: Maithili Hinge <maithili@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/cfg80211.c |  6 +++---
 drivers/net/wireless/mwifiex/fw.h       |  5 +++++
 drivers/net/wireless/mwifiex/uap_cmd.c  | 20 ++++++++++++++++++++
 3 files changed, 28 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index ee45d626eedb..21ee27ab7b74 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -2100,10 +2100,10 @@ mwifiex_setup_ht_caps(struct ieee80211_sta_ht_cap *ht_info,
 	else
 		ht_info->cap &= ~IEEE80211_HT_CAP_SGI_40;
 
-	if (ISSUPP_RXSTBC(adapter->hw_dot_11n_dev_cap))
-		ht_info->cap |= 1 << IEEE80211_HT_CAP_RX_STBC_SHIFT;
+	if (adapter->user_dev_mcs_support == HT_STREAM_2X2)
+		ht_info->cap |= 3 << IEEE80211_HT_CAP_RX_STBC_SHIFT;
 	else
-		ht_info->cap &= ~(3 << IEEE80211_HT_CAP_RX_STBC_SHIFT);
+		ht_info->cap |= 1 << IEEE80211_HT_CAP_RX_STBC_SHIFT;
 
 	if (ISSUPP_TXSTBC(adapter->hw_dot_11n_dev_cap))
 		ht_info->cap |= IEEE80211_HT_CAP_TX_STBC;
diff --git a/drivers/net/wireless/mwifiex/fw.h b/drivers/net/wireless/mwifiex/fw.h
index 341e41978ac6..b485dc1ae5eb 100644
--- a/drivers/net/wireless/mwifiex/fw.h
+++ b/drivers/net/wireless/mwifiex/fw.h
@@ -202,6 +202,11 @@ enum MWIFIEX_802_11_PRIVACY_FILTER {
 
 #define MWIFIEX_DEF_AMPDU	IEEE80211_HT_AMPDU_PARM_FACTOR
 
+#define GET_RXSTBC(x) (x & IEEE80211_HT_CAP_RX_STBC)
+#define MWIFIEX_RX_STBC1	0x0100
+#define MWIFIEX_RX_STBC12	0x0200
+#define MWIFIEX_RX_STBC123	0x0300
+
 /* dev_cap bitmap
  * BIT
  * 0-16		reserved
diff --git a/drivers/net/wireless/mwifiex/uap_cmd.c b/drivers/net/wireless/mwifiex/uap_cmd.c
index a6a6a53cda40..9be6544bdded 100644
--- a/drivers/net/wireless/mwifiex/uap_cmd.c
+++ b/drivers/net/wireless/mwifiex/uap_cmd.c
@@ -159,6 +159,7 @@ mwifiex_set_ht_params(struct mwifiex_private *priv,
 		      struct cfg80211_ap_settings *params)
 {
 	const u8 *ht_ie;
+	u16 cap_info;
 
 	if (!ISSUPP_11NENABLED(priv->adapter->fw_cap_info))
 		return;
@@ -168,6 +169,25 @@ mwifiex_set_ht_params(struct mwifiex_private *priv,
 	if (ht_ie) {
 		memcpy(&bss_cfg->ht_cap, ht_ie + 2,
 		       sizeof(struct ieee80211_ht_cap));
+		cap_info = le16_to_cpu(bss_cfg->ht_cap.cap_info);
+		memset(&bss_cfg->ht_cap.mcs, 0,
+		       priv->adapter->number_of_antenna);
+		switch (GET_RXSTBC(cap_info)) {
+		case MWIFIEX_RX_STBC1:
+			/* HT_CAP 1X1 mode */
+			memset(&bss_cfg->ht_cap.mcs, 0xff, 1);
+			break;
+		case MWIFIEX_RX_STBC12:	/* fall through */
+		case MWIFIEX_RX_STBC123:
+			/* HT_CAP 2X2 mode */
+			memset(&bss_cfg->ht_cap.mcs, 0xff, 2);
+			break;
+		default:
+			dev_warn(priv->adapter->dev,
+				 "Unsupported RX-STBC, default to 2x2\n");
+			memset(&bss_cfg->ht_cap.mcs, 0xff, 2);
+			break;
+		}
 		priv->ap_11n_enabled = 1;
 	} else {
 		memset(&bss_cfg->ht_cap , 0, sizeof(struct ieee80211_ht_cap));
-- 
cgit v1.2.2


From 588aefa081cb13d80240c8b4fc656acda480d7dd Mon Sep 17 00:00:00 2001
From: Mitch Williams <mitch.a.williams@intel.com>
Date: Tue, 11 Feb 2014 08:27:49 +0000
Subject: i40e: support VF link state ndo

This netdev op allows the PF driver to control the virtual link state of
the VF devices. This can be used to deny naughty VF drivers access to
the wire, or to allow VFs (regardless of temperament) to communicate
with each other over the device's internal switch even though external
link is down.

Add the actual ndo function, and modify vc_notify_link_state to check
the link status of each VF before sending a message in the case when
physical link changes state.

Change-ID: Ib5a6924da78c540789f21d26b5e8086d71c29384
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c        |  1 +
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 86 ++++++++++++++++++++--
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h |  4 +
 3 files changed, 85 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 3daaf205eabc..9c4f53ef957d 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -6547,6 +6547,7 @@ static const struct net_device_ops i40e_netdev_ops = {
 	.ndo_set_vf_vlan	= i40e_ndo_set_vf_port_vlan,
 	.ndo_set_vf_tx_rate	= i40e_ndo_set_vf_bw,
 	.ndo_get_vf_config	= i40e_ndo_get_vf_config,
+	.ndo_set_vf_link_state	= i40e_ndo_set_vf_link_state,
 #ifdef CONFIG_I40E_VXLAN
 	.ndo_add_vxlan_port	= i40e_add_vxlan_port,
 	.ndo_del_vxlan_port	= i40e_del_vxlan_port,
diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index 7839343b967b..2086a62062c2 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -1920,15 +1920,28 @@ static void i40e_vc_vf_broadcast(struct i40e_pf *pf,
 void i40e_vc_notify_link_state(struct i40e_pf *pf)
 {
 	struct i40e_virtchnl_pf_event pfe;
+	struct i40e_hw *hw = &pf->hw;
+	struct i40e_vf *vf = pf->vf;
+	struct i40e_link_status *ls = &pf->hw.phy.link_info;
+	int i;
 
 	pfe.event = I40E_VIRTCHNL_EVENT_LINK_CHANGE;
 	pfe.severity = I40E_PF_EVENT_SEVERITY_INFO;
-	pfe.event_data.link_event.link_status =
-	    pf->hw.phy.link_info.link_info & I40E_AQ_LINK_UP;
-	pfe.event_data.link_event.link_speed = pf->hw.phy.link_info.link_speed;
-
-	i40e_vc_vf_broadcast(pf, I40E_VIRTCHNL_OP_EVENT, I40E_SUCCESS,
-			     (u8 *)&pfe, sizeof(struct i40e_virtchnl_pf_event));
+	for (i = 0; i < pf->num_alloc_vfs; i++) {
+		if (vf->link_forced) {
+			pfe.event_data.link_event.link_status = vf->link_up;
+			pfe.event_data.link_event.link_speed =
+				(vf->link_up ? I40E_LINK_SPEED_40GB : 0);
+		} else {
+			pfe.event_data.link_event.link_status =
+				ls->link_info & I40E_AQ_LINK_UP;
+			pfe.event_data.link_event.link_speed = ls->link_speed;
+		}
+		i40e_aq_send_msg_to_vf(hw, vf->vf_id, I40E_VIRTCHNL_OP_EVENT,
+				       0, (u8 *)&pfe, sizeof(pfe),
+				       NULL);
+		vf++;
+	}
 }
 
 /**
@@ -2193,3 +2206,64 @@ int i40e_ndo_get_vf_config(struct net_device *netdev,
 error_param:
 	return ret;
 }
+
+/**
+ * i40e_ndo_set_vf_link_state
+ * @netdev: network interface device structure
+ * @vf_id: vf identifier
+ * @link: required link state
+ *
+ * Set the link state of a specified VF, regardless of physical link state
+ **/
+int i40e_ndo_set_vf_link_state(struct net_device *netdev, int vf_id, int link)
+{
+	struct i40e_netdev_priv *np = netdev_priv(netdev);
+	struct i40e_pf *pf = np->vsi->back;
+	struct i40e_virtchnl_pf_event pfe;
+	struct i40e_hw *hw = &pf->hw;
+	struct i40e_vf *vf;
+	int ret = 0;
+
+	/* validate the request */
+	if (vf_id >= pf->num_alloc_vfs) {
+		dev_err(&pf->pdev->dev, "Invalid VF Identifier %d\n", vf_id);
+		ret = -EINVAL;
+		goto error_out;
+	}
+
+	vf = &pf->vf[vf_id];
+
+	pfe.event = I40E_VIRTCHNL_EVENT_LINK_CHANGE;
+	pfe.severity = I40E_PF_EVENT_SEVERITY_INFO;
+
+	switch (link) {
+	case IFLA_VF_LINK_STATE_AUTO:
+		vf->link_forced = false;
+		pfe.event_data.link_event.link_status =
+			pf->hw.phy.link_info.link_info & I40E_AQ_LINK_UP;
+		pfe.event_data.link_event.link_speed =
+			pf->hw.phy.link_info.link_speed;
+		break;
+	case IFLA_VF_LINK_STATE_ENABLE:
+		vf->link_forced = true;
+		vf->link_up = true;
+		pfe.event_data.link_event.link_status = true;
+		pfe.event_data.link_event.link_speed = I40E_LINK_SPEED_40GB;
+		break;
+	case IFLA_VF_LINK_STATE_DISABLE:
+		vf->link_forced = true;
+		vf->link_up = false;
+		pfe.event_data.link_event.link_status = false;
+		pfe.event_data.link_event.link_speed = 0;
+		break;
+	default:
+		ret = -EINVAL;
+		goto error_out;
+	}
+	/* Notify the VF of its new link state */
+	i40e_aq_send_msg_to_vf(hw, vf->vf_id, I40E_VIRTCHNL_OP_EVENT,
+			       0, (u8 *)&pfe, sizeof(pfe), NULL);
+
+error_out:
+	return ret;
+}
diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h
index bedf0ba21d74..389c47f396d5 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h
@@ -98,6 +98,8 @@ struct i40e_vf {
 
 	unsigned long vf_caps;	/* vf's adv. capabilities */
 	unsigned long vf_states;	/* vf's runtime states */
+	bool link_forced;
+	bool link_up;		/* only valid if vf link is forced */
 };
 
 void i40e_free_vfs(struct i40e_pf *pf);
@@ -116,6 +118,8 @@ int i40e_ndo_set_vf_port_vlan(struct net_device *netdev,
 int i40e_ndo_set_vf_bw(struct net_device *netdev, int vf_id, int tx_rate);
 int i40e_ndo_get_vf_config(struct net_device *netdev,
 			   int vf_id, struct ifla_vf_info *ivi);
+int i40e_ndo_set_vf_link_state(struct net_device *netdev, int vf_id, int link);
+
 void i40e_vc_notify_link_state(struct i40e_pf *pf);
 void i40e_vc_notify_reset(struct i40e_pf *pf);
 
-- 
cgit v1.2.2


From 28bdc499d647124fa5844453d35e6f5d1b3810dc Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Date: Wed, 19 Mar 2014 02:58:16 +0300
Subject: micrel: fix masking off LED bits

Commit 20d8435a1cff (phy: micrel: add of configuration for LED mode) made the
obvious mistake when masking off  the LED mode bits: forgot to do a logical NOT
to the mask with which it ANDs the register value, so that unrelated bits are
cleared instead.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/micrel.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 0c9e4342f11d..5ad971a55c5d 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -167,7 +167,7 @@ static int kszphy_setup_led(struct phy_device *phydev,
 	if (temp < 0)
 		return temp;
 
-	temp &= 3 << shift;
+	temp &= ~(3 << shift);
 	temp |= val << shift;
 	rc = phy_write(phydev, reg, temp);
 
-- 
cgit v1.2.2


From 96d477045388c03a03041c382f19e122046c0afd Mon Sep 17 00:00:00 2001
From: Mitch Williams <mitch.a.williams@intel.com>
Date: Tue, 11 Feb 2014 08:27:50 +0000
Subject: i40evf: correctly program RSS HLUT table

The HLUT programming loop in in i40evf_configure_rss was a) overly-
complicated, and b) just plain broken. Most of the entries ended up being
not written at all, so most of the flows ended up at queue zero.

Refactor the HLUT programming loop to simply walk through the registers
and write four values to each one, incrementing through the number of
available queues.

Change-ID: I75766179bc67e4e997187794f3144e28c83fd00d
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40evf/i40evf_main.c | 23 ++++++++++++++---------
 1 file changed, 14 insertions(+), 9 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index d62e27f6e83a..ffda5657fe02 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -1414,6 +1414,13 @@ restart_watchdog:
 	schedule_work(&adapter->adminq_task);
 }
 
+static int next_queue(struct i40evf_adapter *adapter, int j)
+{
+	j += 1;
+
+	return j >= adapter->vsi_res->num_queue_pairs ? 0 : j;
+}
+
 /**
  * i40evf_configure_rss - Prepare for RSS if used
  * @adapter: board private structure
@@ -1444,15 +1451,13 @@ static void i40evf_configure_rss(struct i40evf_adapter *adapter)
 	wr32(hw, I40E_VFQF_HENA(1), (u32)(hena >> 32));
 
 	/* Populate the LUT with max no. of queues in round robin fashion */
-	for (i = 0, j = 0; i < I40E_VFQF_HLUT_MAX_INDEX; i++, j++) {
-		if (j == adapter->vsi_res->num_queue_pairs)
-			j = 0;
-		/* lut = 4-byte sliding window of 4 lut entries */
-		lut = (lut << 8) | (j &
-			 ((0x1 << 8) - 1));
-		/* On i = 3, we have 4 entries in lut; write to the register */
-		if ((i & 3) == 3)
-			wr32(hw, I40E_VFQF_HLUT(i >> 2), lut);
+	j = adapter->vsi_res->num_queue_pairs;
+	for (i = 0; i <= I40E_VFQF_HLUT_MAX_INDEX; i++) {
+		lut = next_queue(adapter, j);
+		lut |= next_queue(adapter, j) << 8;
+		lut |= next_queue(adapter, j) << 16;
+		lut |= next_queue(adapter, j) << 24;
+		wr32(hw, I40E_VFQF_HLUT(i), lut);
 	}
 	i40e_flush(hw);
 }
-- 
cgit v1.2.2


From 30a500e21831ec3fb050da3ab8bb4c6facf23ef0 Mon Sep 17 00:00:00 2001
From: Mitch Williams <mitch.a.williams@intel.com>
Date: Tue, 11 Feb 2014 08:27:52 +0000
Subject: i40evf: use min_t

Checkpatch complained in an earlier patch about using min(), but that
change would have been completely unrelated to the point of that patch.
So fix it here.

Change-ID: I2cd87b39cfd406850d283b88f259757a6bcd14cd
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40evf/i40evf_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index ffda5657fe02..5575ee779497 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -1140,8 +1140,8 @@ static int i40evf_set_interrupt_capability(struct i40evf_adapter *adapter)
 	 * than CPU's.  So let's be conservative and only ask for
 	 * (roughly) twice the number of vectors as there are CPU's.
 	 */
-	v_budget = min(pairs, (int)(num_online_cpus() * 2)) + NONQ_VECS;
-	v_budget = min(v_budget, (int)adapter->vf_res->max_vectors);
+	v_budget = min_t(int, pairs, (int)(num_online_cpus() * 2)) + NONQ_VECS;
+	v_budget = min_t(int, v_budget, (int)adapter->vf_res->max_vectors);
 
 	/* A failure in MSI-X entry allocation isn't fatal, but it does
 	 * mean we disable MSI-X capabilities of the adapter.
-- 
cgit v1.2.2


From 7c3c288bcf95ebfc970c508821dd950876422280 Mon Sep 17 00:00:00 2001
From: Anjali Singhai Jain <anjali.singhai@intel.com>
Date: Fri, 14 Feb 2014 02:14:38 +0000
Subject: i40e: Patch to enable Ethtool/netdev feature flag for NTUPLE control

This enables option '-k/-K' in ethtool for NTUPLE control.
NTUPLE control requires a reset, to take effect. When the feature is
turned off, the SW list of stored FD SB filters gets cleaned up.

Change-ID: I9d564b67a10d4afa11de3b320d601c3d2e6edc1f
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e.h      |  1 +
 drivers/net/ethernet/intel/i40e/i40e_main.c | 41 +++++++++++++++++++++++++++++
 2 files changed, 42 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
index bd1b4690a608..ac04112615cf 100644
--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -558,6 +558,7 @@ int i40e_add_del_fdir(struct i40e_vsi *vsi,
 		      struct i40e_fdir_filter *input, bool add);
 void i40e_fdir_check_and_reenable(struct i40e_pf *pf);
 int i40e_get_current_fd_count(struct i40e_pf *pf);
+bool i40e_set_ntuple(struct i40e_pf *pf, netdev_features_t features);
 void i40e_set_ethtool_ops(struct net_device *netdev);
 struct i40e_mac_filter *i40e_add_filter(struct i40e_vsi *vsi,
 					u8 *macaddr, s16 vlan,
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 9c4f53ef957d..5015dad9bdad 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -6408,6 +6408,39 @@ sw_init_done:
 	return err;
 }
 
+/**
+ * i40e_set_ntuple - set the ntuple feature flag and take action
+ * @pf: board private structure to initialize
+ * @features: the feature set that the stack is suggesting
+ *
+ * returns a bool to indicate if reset needs to happen
+ **/
+bool i40e_set_ntuple(struct i40e_pf *pf, netdev_features_t features)
+{
+	bool need_reset = false;
+
+	/* Check if Flow Director n-tuple support was enabled or disabled.  If
+	 * the state changed, we need to reset.
+	 */
+	if (features & NETIF_F_NTUPLE) {
+		/* Enable filters and mark for reset */
+		if (!(pf->flags & I40E_FLAG_FD_SB_ENABLED))
+			need_reset = true;
+		pf->flags |= I40E_FLAG_FD_SB_ENABLED;
+	} else {
+		/* turn off filters, mark for reset and clear SW filter list */
+		if (pf->flags & I40E_FLAG_FD_SB_ENABLED) {
+			need_reset = true;
+			i40e_fdir_filter_exit(pf);
+		}
+		pf->flags &= ~I40E_FLAG_FD_SB_ENABLED;
+		/* if ATR was disabled it can be re-enabled. */
+		if (!(pf->flags & I40E_FLAG_FD_ATR_ENABLED))
+			pf->flags |= I40E_FLAG_FD_ATR_ENABLED;
+	}
+	return need_reset;
+}
+
 /**
  * i40e_set_features - set the netdev feature flags
  * @netdev: ptr to the netdev being adjusted
@@ -6418,12 +6451,19 @@ static int i40e_set_features(struct net_device *netdev,
 {
 	struct i40e_netdev_priv *np = netdev_priv(netdev);
 	struct i40e_vsi *vsi = np->vsi;
+	struct i40e_pf *pf = vsi->back;
+	bool need_reset;
 
 	if (features & NETIF_F_HW_VLAN_CTAG_RX)
 		i40e_vlan_stripping_enable(vsi);
 	else
 		i40e_vlan_stripping_disable(vsi);
 
+	need_reset = i40e_set_ntuple(pf, features);
+
+	if (need_reset)
+		i40e_do_reset(pf, (1 << __I40E_PF_RESET_REQUESTED));
+
 	return 0;
 }
 
@@ -6595,6 +6635,7 @@ static int i40e_config_netdev(struct i40e_vsi *vsi)
 			   NETIF_F_TSO		       |
 			   NETIF_F_TSO6		       |
 			   NETIF_F_RXCSUM	       |
+			   NETIF_F_NTUPLE	       |
 			   NETIF_F_RXHASH	       |
 			   0;
 
-- 
cgit v1.2.2


From 6c167f582ea93d0b66a187ec06a7c015fecd723a Mon Sep 17 00:00:00 2001
From: Elizabeth Kappler <elizabeth.m.kappler@intel.com>
Date: Sat, 15 Feb 2014 07:41:38 +0000
Subject: i40e: Refactor and cleanup i40e_open(), adding i40e_vsi_open()

This patch cleans up and moves a portion of i40e_open to i40e_vsi_open,
in order to have a shorter vsi_open function that does only that.

Change-ID: I1c418dda94dcfc0eb7d4386a70c330692ef5ecc9
Signed-off-by: Elizabeth Kappler <elizabeth.m.kappler@intel.com>
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e.h      |  3 ++-
 drivers/net/ethernet/intel/i40e/i40e_main.c | 40 +++++++++++++++++++++++------
 2 files changed, 34 insertions(+), 9 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
index ac04112615cf..33cd8b67535d 100644
--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -208,7 +208,7 @@ struct i40e_pf {
 	bool fc_autoneg_status;
 
 	u16 eeprom_version;
-	u16 num_vmdq_vsis;         /* num vmdq pools this pf has set up */
+	u16 num_vmdq_vsis;         /* num vmdq vsis this pf has set up */
 	u16 num_vmdq_qps;          /* num queue pairs per vmdq pool */
 	u16 num_vmdq_msix;         /* num queue vectors per vmdq pool */
 	u16 num_req_vfs;           /* num vfs requested for this vf */
@@ -597,6 +597,7 @@ void i40e_irq_dynamic_enable(struct i40e_vsi *vsi, int vector);
 void i40e_irq_dynamic_disable_icr0(struct i40e_pf *pf);
 void i40e_irq_dynamic_enable_icr0(struct i40e_pf *pf);
 int i40e_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd);
+int i40e_vsi_open(struct i40e_vsi *vsi);
 void i40e_vlan_stripping_disable(struct i40e_vsi *vsi);
 int i40e_vsi_add_vlan(struct i40e_vsi *vsi, s16 vid);
 int i40e_vsi_kill_vlan(struct i40e_vsi *vsi, s16 vid);
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 5015dad9bdad..661cd427bce6 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -4235,7 +4235,6 @@ static int i40e_open(struct net_device *netdev)
 	struct i40e_netdev_priv *np = netdev_priv(netdev);
 	struct i40e_vsi *vsi = np->vsi;
 	struct i40e_pf *pf = vsi->back;
-	char int_name[IFNAMSIZ];
 	int err;
 
 	/* disallow open during test */
@@ -4244,6 +4243,31 @@ static int i40e_open(struct net_device *netdev)
 
 	netif_carrier_off(netdev);
 
+	err = i40e_vsi_open(vsi);
+	if (err)
+		return err;
+
+#ifdef CONFIG_I40E_VXLAN
+	vxlan_get_rx_port(netdev);
+#endif
+
+	return 0;
+}
+
+/**
+ * i40e_vsi_open -
+ * @vsi: the VSI to open
+ *
+ * Finish initialization of the VSI.
+ *
+ * Returns 0 on success, negative value on failure
+ **/
+int i40e_vsi_open(struct i40e_vsi *vsi)
+{
+	struct i40e_pf *pf = vsi->back;
+	char int_name[IFNAMSIZ];
+	int err;
+
 	/* allocate descriptors */
 	err = i40e_vsi_setup_tx_resources(vsi);
 	if (err)
@@ -4256,18 +4280,22 @@ static int i40e_open(struct net_device *netdev)
 	if (err)
 		goto err_setup_rx;
 
+	if (!vsi->netdev) {
+		err = EINVAL;
+		goto err_setup_rx;
+	}
 	snprintf(int_name, sizeof(int_name) - 1, "%s-%s",
-		 dev_driver_string(&pf->pdev->dev), netdev->name);
+		 dev_driver_string(&pf->pdev->dev), vsi->netdev->name);
 	err = i40e_vsi_request_irq(vsi, int_name);
 	if (err)
 		goto err_setup_rx;
 
 	/* Notify the stack of the actual queue counts. */
-	err = netif_set_real_num_tx_queues(netdev, vsi->num_queue_pairs);
+	err = netif_set_real_num_tx_queues(vsi->netdev, vsi->num_queue_pairs);
 	if (err)
 		goto err_set_queues;
 
-	err = netif_set_real_num_rx_queues(netdev, vsi->num_queue_pairs);
+	err = netif_set_real_num_rx_queues(vsi->netdev, vsi->num_queue_pairs);
 	if (err)
 		goto err_set_queues;
 
@@ -4275,10 +4303,6 @@ static int i40e_open(struct net_device *netdev)
 	if (err)
 		goto err_up_complete;
 
-#ifdef CONFIG_I40E_VXLAN
-	vxlan_get_rx_port(netdev);
-#endif
-
 	return 0;
 
 err_up_complete:
-- 
cgit v1.2.2


From 1943d8ba9507d49fa5cdb51eb1b63810d94e1969 Mon Sep 17 00:00:00 2001
From: Jesse Brandeburg <jesse.brandeburg@intel.com>
Date: Fri, 14 Feb 2014 02:14:40 +0000
Subject: i40e/i40evf: enable hardware feature head write back

The hardware supports a feature to avoid updating the descriptor
ring by marking each descriptor with a DD bit, and instead
writes a memory location with an update to where the driver
should clean up to.  Enable this feature.

Change-ID: I5da4e0681f0b581a6401c950a81808792267fe57
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c        |  5 +++
 drivers/net/ethernet/intel/i40e/i40e_txrx.c        | 46 +++++++++++++++++++---
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c |  3 ++
 drivers/net/ethernet/intel/i40evf/i40e_txrx.c      | 46 +++++++++++++++++++---
 4 files changed, 88 insertions(+), 12 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 661cd427bce6..95433d4d2f6a 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -2181,6 +2181,11 @@ static int i40e_configure_tx_ring(struct i40e_ring *ring)
 	tx_ctx.fd_ena = !!(vsi->back->flags & (I40E_FLAG_FD_SB_ENABLED |
 					       I40E_FLAG_FD_ATR_ENABLED));
 	tx_ctx.timesync_ena = !!(vsi->back->flags & I40E_FLAG_PTP);
+	/* FDIR VSI tx ring can still use RS bit and writebacks */
+	if (vsi->type != I40E_VSI_FDIR)
+		tx_ctx.head_wb_ena = 1;
+	tx_ctx.head_wb_addr = ring->dma +
+			      (ring->count * sizeof(struct i40e_tx_desc));
 
 	/* As part of VSI creation/update, FW allocates certain
 	 * Tx arbitration queue sets for each TC enabled for
diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index 88666adb0743..079c6b2bafc3 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -618,6 +618,20 @@ static bool i40e_check_tx_hang(struct i40e_ring *tx_ring)
 	return ret;
 }
 
+/**
+ * i40e_get_head - Retrieve head from head writeback
+ * @tx_ring:  tx ring to fetch head of
+ *
+ * Returns value of Tx ring head based on value stored
+ * in head write-back location
+ **/
+static inline u32 i40e_get_head(struct i40e_ring *tx_ring)
+{
+	void *head = (struct i40e_tx_desc *)tx_ring->desc + tx_ring->count;
+
+	return le32_to_cpu(*(volatile __le32 *)head);
+}
+
 /**
  * i40e_clean_tx_irq - Reclaim resources after transmit completes
  * @tx_ring:  tx ring to clean
@@ -629,6 +643,7 @@ static bool i40e_clean_tx_irq(struct i40e_ring *tx_ring, int budget)
 {
 	u16 i = tx_ring->next_to_clean;
 	struct i40e_tx_buffer *tx_buf;
+	struct i40e_tx_desc *tx_head;
 	struct i40e_tx_desc *tx_desc;
 	unsigned int total_packets = 0;
 	unsigned int total_bytes = 0;
@@ -637,6 +652,8 @@ static bool i40e_clean_tx_irq(struct i40e_ring *tx_ring, int budget)
 	tx_desc = I40E_TX_DESC(tx_ring, i);
 	i -= tx_ring->count;
 
+	tx_head = I40E_TX_DESC(tx_ring, i40e_get_head(tx_ring));
+
 	do {
 		struct i40e_tx_desc *eop_desc = tx_buf->next_to_watch;
 
@@ -647,9 +664,8 @@ static bool i40e_clean_tx_irq(struct i40e_ring *tx_ring, int budget)
 		/* prevent any other reads prior to eop_desc */
 		read_barrier_depends();
 
-		/* if the descriptor isn't done, no work yet to do */
-		if (!(eop_desc->cmd_type_offset_bsz &
-		      cpu_to_le64(I40E_TX_DESC_DTYPE_DESC_DONE)))
+		/* we have caught up to head, no work left to do */
+		if (tx_head == tx_desc)
 			break;
 
 		/* clear next_to_watch to prevent false hangs */
@@ -905,6 +921,10 @@ int i40e_setup_tx_descriptors(struct i40e_ring *tx_ring)
 
 	/* round up to nearest 4K */
 	tx_ring->size = tx_ring->count * sizeof(struct i40e_tx_desc);
+	/* add u32 for head writeback, align after this takes care of
+	 * guaranteeing this is at least one cache line in size
+	 */
+	tx_ring->size += sizeof(u32);
 	tx_ring->size = ALIGN(tx_ring->size, 4096);
 	tx_ring->desc = dma_alloc_coherent(dev, tx_ring->size,
 					   &tx_ring->dma, GFP_KERNEL);
@@ -2042,9 +2062,23 @@ static void i40e_tx_map(struct i40e_ring *tx_ring, struct sk_buff *skb,
 		tx_bi = &tx_ring->tx_bi[i];
 	}
 
-	tx_desc->cmd_type_offset_bsz =
-		build_ctob(td_cmd, td_offset, size, td_tag) |
-		cpu_to_le64((u64)I40E_TXD_CMD << I40E_TXD_QW1_CMD_SHIFT);
+	/* Place RS bit on last descriptor of any packet that spans across the
+	 * 4th descriptor (WB_STRIDE aka 0x3) in a 64B cacheline.
+	 */
+#define WB_STRIDE 0x3
+	if (((i & WB_STRIDE) != WB_STRIDE) &&
+	    (first <= &tx_ring->tx_bi[i]) &&
+	    (first >= &tx_ring->tx_bi[i & ~WB_STRIDE])) {
+		tx_desc->cmd_type_offset_bsz =
+			build_ctob(td_cmd, td_offset, size, td_tag) |
+			cpu_to_le64((u64)I40E_TX_DESC_CMD_EOP <<
+					 I40E_TXD_QW1_CMD_SHIFT);
+	} else {
+		tx_desc->cmd_type_offset_bsz =
+			build_ctob(td_cmd, td_offset, size, td_tag) |
+			cpu_to_le64((u64)I40E_TXD_CMD <<
+					 I40E_TXD_QW1_CMD_SHIFT);
+	}
 
 	netdev_tx_sent_queue(netdev_get_tx_queue(tx_ring->netdev,
 						 tx_ring->queue_index),
diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index 2086a62062c2..b2da079cd696 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -230,6 +230,9 @@ static int i40e_config_vsi_tx_queue(struct i40e_vf *vf, u16 vsi_idx,
 	tx_ctx.qlen = info->ring_len;
 	tx_ctx.rdylist = le16_to_cpu(pf->vsi[vsi_idx]->info.qs_handle[0]);
 	tx_ctx.rdylist_act = 0;
+	tx_ctx.head_wb_ena = 1;
+	tx_ctx.head_wb_addr = info->dma_ring_addr +
+			      (info->ring_len * sizeof(struct i40e_tx_desc));
 
 	/* clear the context in the HMC */
 	ret = i40e_clear_lan_tx_queue_context(hw, pf_queue_id);
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
index b1d87c6a5c35..626c08a98edb 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
@@ -169,6 +169,20 @@ static bool i40e_check_tx_hang(struct i40e_ring *tx_ring)
 	return ret;
 }
 
+/**
+ * i40e_get_head - Retrieve head from head writeback
+ * @tx_ring:  tx ring to fetch head of
+ *
+ * Returns value of Tx ring head based on value stored
+ * in head write-back location
+ **/
+static inline u32 i40e_get_head(struct i40e_ring *tx_ring)
+{
+	void *head = (struct i40e_tx_desc *)tx_ring->desc + tx_ring->count;
+
+	return le32_to_cpu(*(volatile __le32 *)head);
+}
+
 /**
  * i40e_clean_tx_irq - Reclaim resources after transmit completes
  * @tx_ring:  tx ring to clean
@@ -180,6 +194,7 @@ static bool i40e_clean_tx_irq(struct i40e_ring *tx_ring, int budget)
 {
 	u16 i = tx_ring->next_to_clean;
 	struct i40e_tx_buffer *tx_buf;
+	struct i40e_tx_desc *tx_head;
 	struct i40e_tx_desc *tx_desc;
 	unsigned int total_packets = 0;
 	unsigned int total_bytes = 0;
@@ -188,6 +203,8 @@ static bool i40e_clean_tx_irq(struct i40e_ring *tx_ring, int budget)
 	tx_desc = I40E_TX_DESC(tx_ring, i);
 	i -= tx_ring->count;
 
+	tx_head = I40E_TX_DESC(tx_ring, i40e_get_head(tx_ring));
+
 	do {
 		struct i40e_tx_desc *eop_desc = tx_buf->next_to_watch;
 
@@ -198,9 +215,8 @@ static bool i40e_clean_tx_irq(struct i40e_ring *tx_ring, int budget)
 		/* prevent any other reads prior to eop_desc */
 		read_barrier_depends();
 
-		/* if the descriptor isn't done, no work yet to do */
-		if (!(eop_desc->cmd_type_offset_bsz &
-		      cpu_to_le64(I40E_TX_DESC_DTYPE_DESC_DONE)))
+		/* we have caught up to head, no work left to do */
+		if (tx_head == tx_desc)
 			break;
 
 		/* clear next_to_watch to prevent false hangs */
@@ -432,6 +448,10 @@ int i40evf_setup_tx_descriptors(struct i40e_ring *tx_ring)
 
 	/* round up to nearest 4K */
 	tx_ring->size = tx_ring->count * sizeof(struct i40e_tx_desc);
+	/* add u32 for head writeback, align after this takes care of
+	 * guaranteeing this is at least one cache line in size
+	 */
+	tx_ring->size += sizeof(u32);
 	tx_ring->size = ALIGN(tx_ring->size, 4096);
 	tx_ring->desc = dma_alloc_coherent(dev, tx_ring->size,
 					   &tx_ring->dma, GFP_KERNEL);
@@ -1377,9 +1397,23 @@ static void i40e_tx_map(struct i40e_ring *tx_ring, struct sk_buff *skb,
 		tx_bi = &tx_ring->tx_bi[i];
 	}
 
-	tx_desc->cmd_type_offset_bsz =
-		build_ctob(td_cmd, td_offset, size, td_tag) |
-		cpu_to_le64((u64)I40E_TXD_CMD << I40E_TXD_QW1_CMD_SHIFT);
+	/* Place RS bit on last descriptor of any packet that spans across the
+	 * 4th descriptor (WB_STRIDE aka 0x3) in a 64B cacheline.
+	 */
+#define WB_STRIDE 0x3
+	if (((i & WB_STRIDE) != WB_STRIDE) &&
+	    (first <= &tx_ring->tx_bi[i]) &&
+	    (first >= &tx_ring->tx_bi[i & ~WB_STRIDE])) {
+		tx_desc->cmd_type_offset_bsz =
+			build_ctob(td_cmd, td_offset, size, td_tag) |
+			cpu_to_le64((u64)I40E_TX_DESC_CMD_EOP <<
+					 I40E_TXD_QW1_CMD_SHIFT);
+	} else {
+		tx_desc->cmd_type_offset_bsz =
+			build_ctob(td_cmd, td_offset, size, td_tag) |
+			cpu_to_le64((u64)I40E_TXD_CMD <<
+					 I40E_TXD_QW1_CMD_SHIFT);
+	}
 
 	netdev_tx_sent_queue(netdev_get_tx_queue(tx_ring->netdev,
 						 tx_ring->queue_index),
-- 
cgit v1.2.2


From ff40dd5d44707e2964c1b24196a86bf1938ce32b Mon Sep 17 00:00:00 2001
From: Jesse Brandeburg <jesse.brandeburg@intel.com>
Date: Fri, 14 Feb 2014 02:14:41 +0000
Subject: i40e/i40evf: reduce context descriptors

We don't need context descriptors for every packet, only tso
or timesync.  This fixes a bug in the driver where it would
always add a context even if all the passed in values
to the context descriptor function were 0/default values.

Change-ID: I0101d2b893380707b5c2de61aab3e16d4310e9a1
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_txrx.c   | 3 ++-
 drivers/net/ethernet/intel/i40evf/i40e_txrx.c | 3 ++-
 2 files changed, 4 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index 079c6b2bafc3..851f6537a96a 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -1951,7 +1951,8 @@ static void i40e_create_tx_ctx(struct i40e_ring *tx_ring,
 	struct i40e_tx_context_desc *context_desc;
 	int i = tx_ring->next_to_use;
 
-	if (!cd_type_cmd_tso_mss && !cd_tunneling && !cd_l2tag2)
+	if ((cd_type_cmd_tso_mss == I40E_TX_DESC_DTYPE_CONTEXT) &&
+	    !cd_tunneling && !cd_l2tag2)
 		return;
 
 	/* grab the next descriptor */
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
index 626c08a98edb..53be5f44d015 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
@@ -1286,7 +1286,8 @@ static void i40e_create_tx_ctx(struct i40e_ring *tx_ring,
 	struct i40e_tx_context_desc *context_desc;
 	int i = tx_ring->next_to_use;
 
-	if (!cd_type_cmd_tso_mss && !cd_tunneling && !cd_l2tag2)
+	if ((cd_type_cmd_tso_mss == I40E_TX_DESC_DTYPE_CONTEXT) &&
+	    !cd_tunneling && !cd_l2tag2)
 		return;
 
 	/* grab the next descriptor */
-- 
cgit v1.2.2


From c243e96335c56e56dcf6a00593104554fb06b689 Mon Sep 17 00:00:00 2001
From: Dan Carpenter <dan.carpenter@oracle.com>
Date: Wed, 15 Jan 2014 06:43:39 +0000
Subject: i40e: potential array underflow in i40e_vc_process_vf_msg()

If "vf_id" is smaller than hw->func_caps.vf_base_id then it leads to
an array underflow of the pf->vf[] array.  This is unlikely to happen
unless the hardware is bad, but it's a small change and it silences a
static checker warning.

Fixes: 7efa84b7abc1 ('i40e: support VFs on PFs other than 0')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index b2da079cd696..02c11a7f7d29 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -1774,7 +1774,7 @@ int i40e_vc_process_vf_msg(struct i40e_pf *pf, u16 vf_id, u32 v_opcode,
 			   u32 v_retval, u8 *msg, u16 msglen)
 {
 	struct i40e_hw *hw = &pf->hw;
-	int local_vf_id = vf_id - hw->func_caps.vf_base_id;
+	unsigned int local_vf_id = vf_id - hw->func_caps.vf_base_id;
 	struct i40e_vf *vf;
 	int ret;
 
-- 
cgit v1.2.2


From db44609480e8004906d7c8bd660b31ddb7641d93 Mon Sep 17 00:00:00 2001
From: Catherine Sullivan <catherine.sullivan@intel.com>
Date: Fri, 14 Feb 2014 02:14:42 +0000
Subject: i40e/i40evf: Bump build versions

Bump to version 0.3.36 for i40e and 0.9.16 for i40evf.

Change-ID: I7b4ff97b32d2825181803c03c316381a7608a618
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c     | 2 +-
 drivers/net/ethernet/intel/i40evf/i40evf_main.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 95433d4d2f6a..113354214517 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -38,7 +38,7 @@ static const char i40e_driver_string[] =
 
 #define DRV_VERSION_MAJOR 0
 #define DRV_VERSION_MINOR 3
-#define DRV_VERSION_BUILD 34
+#define DRV_VERSION_BUILD 36
 #define DRV_VERSION __stringify(DRV_VERSION_MAJOR) "." \
 	     __stringify(DRV_VERSION_MINOR) "." \
 	     __stringify(DRV_VERSION_BUILD)    DRV_KERN
diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index 5575ee779497..d381bcc4ea9f 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -31,7 +31,7 @@ char i40evf_driver_name[] = "i40evf";
 static const char i40evf_driver_string[] =
 	"Intel(R) XL710 X710 Virtual Function Network Driver";
 
-#define DRV_VERSION "0.9.14"
+#define DRV_VERSION "0.9.16"
 const char i40evf_driver_version[] = DRV_VERSION;
 static const char i40evf_copyright[] =
 	"Copyright (c) 2013 - 2014 Intel Corporation.";
-- 
cgit v1.2.2


From d9554e9659e974904fff3e93b2833f67e87ec084 Mon Sep 17 00:00:00 2001
From: David Ertman <davidx.m.ertman@intel.com>
Date: Wed, 8 Jan 2014 01:07:55 +0000
Subject: e1000e: Fix Hardware Unit Hang

The check for pending Tx work when link is lost was mistakenly moved to be
done only when link is first detected to be lost.  It turns out there is a
small window of opportunity for additional Tx work to get queued up shortly
after link is dropped.

Move the check back to the place it was before in the watchdog task.  Put in
additional debug information for other reset paths and a final catch-all for
false hangs in the scheduled function that prints out the hardware hang
message.

Signed-off-by: Dave Ertman <davidx.m.ertman@intel.com>
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/e1000e/netdev.c | 32 +++++++++++++++++++++---------
 1 file changed, 23 insertions(+), 9 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index eafad410e59a..d57772327306 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -1090,8 +1090,14 @@ static void e1000_print_hw_hang(struct work_struct *work)
 		adapter->tx_hang_recheck = true;
 		return;
 	}
-	/* Real hang detected */
 	adapter->tx_hang_recheck = false;
+
+	if (er32(TDH(0)) == er32(TDT(0))) {
+		e_dbg("false hang detected, ignoring\n");
+		return;
+	}
+
+	/* Real hang detected */
 	netif_stop_queue(netdev);
 
 	e1e_rphy(hw, MII_BMSR, &phy_status);
@@ -1121,6 +1127,8 @@ static void e1000_print_hw_hang(struct work_struct *work)
 	      eop, jiffies, eop_desc->upper.fields.status, er32(STATUS),
 	      phy_status, phy_1000t_status, phy_ext_status, pci_status);
 
+	e1000e_dump(adapter);
+
 	/* Suggest workaround for known h/w issue */
 	if ((hw->mac.type == e1000_pchlan) && (er32(CTRL) & E1000_CTRL_TFCE))
 		e_err("Try turning off Tx pause (flow control) via ethtool\n");
@@ -4798,6 +4806,7 @@ static void e1000e_check_82574_phy_workaround(struct e1000_adapter *adapter)
 
 	if (adapter->phy_hang_count > 1) {
 		adapter->phy_hang_count = 0;
+		e_dbg("PHY appears hung - resetting\n");
 		schedule_work(&adapter->reset_task);
 	}
 }
@@ -4956,15 +4965,11 @@ static void e1000_watchdog_task(struct work_struct *work)
 				mod_timer(&adapter->phy_info_timer,
 					  round_jiffies(jiffies + 2 * HZ));
 
-			/* The link is lost so the controller stops DMA.
-			 * If there is queued Tx work that cannot be done
-			 * or if on an 8000ES2LAN which requires a Rx packet
-			 * buffer work-around on link down event, reset the
-			 * controller to flush the Tx/Rx packet buffers.
-			 * (Do the reset outside of interrupt context).
+			/* 8000ES2LAN requires a Rx packet buffer work-around
+			 * on link down event; reset the controller to flush
+			 * the Rx packet buffer.
 			 */
-			if ((adapter->flags & FLAG_RX_NEEDS_RESTART) ||
-			    (e1000_desc_unused(tx_ring) + 1 < tx_ring->count))
+			if (adapter->flags & FLAG_RX_NEEDS_RESTART)
 				adapter->flags |= FLAG_RESTART_NOW;
 			else
 				pm_schedule_suspend(netdev->dev.parent,
@@ -4987,6 +4992,15 @@ link_up:
 	adapter->gotc_old = adapter->stats.gotc;
 	spin_unlock(&adapter->stats64_lock);
 
+	/* If the link is lost the controller stops DMA, but
+	 * if there is queued Tx work it cannot be done.  So
+	 * reset the controller to flush the Tx packet buffers.
+	 */
+	if (!netif_carrier_ok(netdev) &&
+	    (e1000_desc_unused(tx_ring) + 1 < tx_ring->count))
+		adapter->flags |= FLAG_RESTART_NOW;
+
+	/* If reset is necessary, do it outside of interrupt context. */
 	if (adapter->flags & FLAG_RESTART_NOW) {
 		schedule_work(&adapter->reset_task);
 		/* return immediately since reset is imminent */
-- 
cgit v1.2.2


From e7e834aa71ea9b0d54a862d773a6d7730f1d8293 Mon Sep 17 00:00:00 2001
From: David Ertman <davidx.m.ertman@intel.com>
Date: Mon, 13 Jan 2014 23:19:27 +0000
Subject: e1000e: Fix Explicitly set Transmit Control Register

This patch causes the TCTL to be explicitly set to fix a problem with
poor network performance (throughput) on certain silicon when configured
for 100M HDX performance.

Cc: Todd Fujinaka <todd.fujinaka@intel.com>
Signed-off-by: Dave Ertman <davidx.m.ertman@intel.com>
Acked-by: Bruce W. Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/e1000e/netdev.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index d57772327306..6bd1832e3f3e 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -2898,7 +2898,7 @@ static void e1000_configure_tx(struct e1000_adapter *adapter)
 	struct e1000_hw *hw = &adapter->hw;
 	struct e1000_ring *tx_ring = adapter->tx_ring;
 	u64 tdba;
-	u32 tdlen, tarc;
+	u32 tdlen, tctl, tarc;
 
 	/* Setup the HW Tx Head and Tail descriptor pointers */
 	tdba = tx_ring->dma;
@@ -2935,6 +2935,12 @@ static void e1000_configure_tx(struct e1000_adapter *adapter)
 	/* erratum work around: set txdctl the same for both queues */
 	ew32(TXDCTL(1), er32(TXDCTL(0)));
 
+	/* Program the Transmit Control Register */
+	tctl = er32(TCTL);
+	tctl &= ~E1000_TCTL_CT;
+	tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC |
+		(E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
+
 	if (adapter->flags & FLAG_TARC_SPEED_MODE_BIT) {
 		tarc = er32(TARC(0));
 		/* set the speed mode bit, we'll clear it if we're not at
@@ -2965,6 +2971,8 @@ static void e1000_configure_tx(struct e1000_adapter *adapter)
 	/* enable Report Status bit */
 	adapter->txd_cmd |= E1000_TXD_CMD_RS;
 
+	ew32(TCTL, tctl);
+
 	hw->mac.ops.config_collision_dist(hw);
 }
 
-- 
cgit v1.2.2


From 0c375ac1aa863495a54b3a051eead667e49ace5b Mon Sep 17 00:00:00 2001
From: Carolyn Wyborny <carolyn.wyborny@intel.com>
Date: Tue, 11 Mar 2014 06:15:37 +0000
Subject: igb: Add register defines needed for time sync functions

This patch adds defines needed for implementing the auxiliary time sync
functions and also changes code to call the updated defines instead of
the old.

Reported-by: Richard Cochran <ricahrdcochran@gmail.com>
Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/igb/e1000_defines.h | 70 ++++++++++++++++++++++++--
 drivers/net/ethernet/intel/igb/e1000_regs.h    |  9 ++++
 drivers/net/ethernet/intel/igb/igb_ptp.c       |  4 +-
 3 files changed, 78 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/igb/e1000_defines.h b/drivers/net/ethernet/intel/igb/e1000_defines.h
index 393c896ac7e7..b05bf925ac72 100644
--- a/drivers/net/ethernet/intel/igb/e1000_defines.h
+++ b/drivers/net/ethernet/intel/igb/e1000_defines.h
@@ -43,7 +43,11 @@
 #define E1000_WUFC_BC   0x00000010 /* Broadcast Wakeup Enable */
 
 /* Extended Device Control */
+#define E1000_CTRL_EXT_SDP2_DATA 0x00000040 /* Value of SW Defineable Pin 2 */
 #define E1000_CTRL_EXT_SDP3_DATA 0x00000080 /* Value of SW Defineable Pin 3 */
+#define E1000_CTRL_EXT_SDP2_DIR  0x00000400 /* SDP2 Data direction */
+#define E1000_CTRL_EXT_SDP3_DIR  0x00000800 /* SDP3 Data direction */
+
 /* Physical Func Reset Done Indication */
 #define E1000_CTRL_EXT_PFRSTD    0x00004000
 #define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
@@ -190,7 +194,8 @@
 /* enable link status from external LINK_0 and LINK_1 pins */
 #define E1000_CTRL_SWDPIN0  0x00040000  /* SWDPIN 0 value */
 #define E1000_CTRL_SWDPIN1  0x00080000  /* SWDPIN 1 value */
-#define E1000_CTRL_SWDPIO0  0x00400000  /* SWDPIN 0 Input or output */
+#define E1000_CTRL_SDP0_DIR 0x00400000  /* SDP0 Data direction */
+#define E1000_CTRL_SDP1_DIR 0x00800000  /* SDP1 Data direction */
 #define E1000_CTRL_RST      0x04000000  /* Global reset */
 #define E1000_CTRL_RFCE     0x08000000  /* Receive Flow Control enable */
 #define E1000_CTRL_TFCE     0x10000000  /* Transmit flow control enable */
@@ -528,8 +533,67 @@
 
 #define E1000_TIMINCA_16NS_SHIFT 24
 
-#define E1000_TSICR_TXTS 0x00000002
-#define E1000_TSIM_TXTS 0x00000002
+/* Time Sync Interrupt Cause/Mask Register Bits */
+
+#define TSINTR_SYS_WRAP  (1 << 0) /* SYSTIM Wrap around. */
+#define TSINTR_TXTS      (1 << 1) /* Transmit Timestamp. */
+#define TSINTR_RXTS      (1 << 2) /* Receive Timestamp. */
+#define TSINTR_TT0       (1 << 3) /* Target Time 0 Trigger. */
+#define TSINTR_TT1       (1 << 4) /* Target Time 1 Trigger. */
+#define TSINTR_AUTT0     (1 << 5) /* Auxiliary Timestamp 0 Taken. */
+#define TSINTR_AUTT1     (1 << 6) /* Auxiliary Timestamp 1 Taken. */
+#define TSINTR_TADJ      (1 << 7) /* Time Adjust Done. */
+
+#define TSYNC_INTERRUPTS TSINTR_TXTS
+#define E1000_TSICR_TXTS TSINTR_TXTS
+
+/* TSAUXC Configuration Bits */
+#define TSAUXC_EN_TT0    (1 << 0)  /* Enable target time 0. */
+#define TSAUXC_EN_TT1    (1 << 1)  /* Enable target time 1. */
+#define TSAUXC_EN_CLK0   (1 << 2)  /* Enable Configurable Frequency Clock 0. */
+#define TSAUXC_SAMP_AUT0 (1 << 3)  /* Latch SYSTIML/H into AUXSTMPL/0. */
+#define TSAUXC_ST0       (1 << 4)  /* Start Clock 0 Toggle on Target Time 0. */
+#define TSAUXC_EN_CLK1   (1 << 5)  /* Enable Configurable Frequency Clock 1. */
+#define TSAUXC_SAMP_AUT1 (1 << 6)  /* Latch SYSTIML/H into AUXSTMPL/1. */
+#define TSAUXC_ST1       (1 << 7)  /* Start Clock 1 Toggle on Target Time 1. */
+#define TSAUXC_EN_TS0    (1 << 8)  /* Enable hardware timestamp 0. */
+#define TSAUXC_AUTT0     (1 << 9)  /* Auxiliary Timestamp Taken. */
+#define TSAUXC_EN_TS1    (1 << 10) /* Enable hardware timestamp 0. */
+#define TSAUXC_AUTT1     (1 << 11) /* Auxiliary Timestamp Taken. */
+#define TSAUXC_PLSG      (1 << 17) /* Generate a pulse. */
+#define TSAUXC_DISABLE   (1 << 31) /* Disable SYSTIM Count Operation. */
+
+/* SDP Configuration Bits */
+#define AUX0_SEL_SDP0    (0 << 0)  /* Assign SDP0 to auxiliary time stamp 0. */
+#define AUX0_SEL_SDP1    (1 << 0)  /* Assign SDP1 to auxiliary time stamp 0. */
+#define AUX0_SEL_SDP2    (2 << 0)  /* Assign SDP2 to auxiliary time stamp 0. */
+#define AUX0_SEL_SDP3    (3 << 0)  /* Assign SDP3 to auxiliary time stamp 0. */
+#define AUX0_TS_SDP_EN   (1 << 2)  /* Enable auxiliary time stamp trigger 0. */
+#define AUX1_SEL_SDP0    (0 << 3)  /* Assign SDP0 to auxiliary time stamp 1. */
+#define AUX1_SEL_SDP1    (1 << 3)  /* Assign SDP1 to auxiliary time stamp 1. */
+#define AUX1_SEL_SDP2    (2 << 3)  /* Assign SDP2 to auxiliary time stamp 1. */
+#define AUX1_SEL_SDP3    (3 << 3)  /* Assign SDP3 to auxiliary time stamp 1. */
+#define AUX1_TS_SDP_EN   (1 << 5)  /* Enable auxiliary time stamp trigger 1. */
+#define TS_SDP0_SEL_TT0  (0 << 6)  /* Target time 0 is output on SDP0. */
+#define TS_SDP0_SEL_TT1  (1 << 6)  /* Target time 1 is output on SDP0. */
+#define TS_SDP0_SEL_FC0  (2 << 6)  /* Freq clock  0 is output on SDP0. */
+#define TS_SDP0_SEL_FC1  (3 << 6)  /* Freq clock  1 is output on SDP0. */
+#define TS_SDP0_EN       (1 << 8)  /* SDP0 is assigned to Tsync. */
+#define TS_SDP1_SEL_TT0  (0 << 9)  /* Target time 0 is output on SDP1. */
+#define TS_SDP1_SEL_TT1  (1 << 9)  /* Target time 1 is output on SDP1. */
+#define TS_SDP1_SEL_FC0  (2 << 9)  /* Freq clock  0 is output on SDP1. */
+#define TS_SDP1_SEL_FC1  (3 << 9)  /* Freq clock  1 is output on SDP1. */
+#define TS_SDP1_EN       (1 << 11) /* SDP1 is assigned to Tsync. */
+#define TS_SDP2_SEL_TT0  (0 << 12) /* Target time 0 is output on SDP2. */
+#define TS_SDP2_SEL_TT1  (1 << 12) /* Target time 1 is output on SDP2. */
+#define TS_SDP2_SEL_FC0  (2 << 12) /* Freq clock  0 is output on SDP2. */
+#define TS_SDP2_SEL_FC1  (3 << 12) /* Freq clock  1 is output on SDP2. */
+#define TS_SDP2_EN       (1 << 14) /* SDP2 is assigned to Tsync. */
+#define TS_SDP3_SEL_TT0  (0 << 15) /* Target time 0 is output on SDP3. */
+#define TS_SDP3_SEL_TT1  (1 << 15) /* Target time 1 is output on SDP3. */
+#define TS_SDP3_SEL_FC0  (2 << 15) /* Freq clock  0 is output on SDP3. */
+#define TS_SDP3_SEL_FC1  (3 << 15) /* Freq clock  1 is output on SDP3. */
+#define TS_SDP3_EN       (1 << 17) /* SDP3 is assigned to Tsync. */
 
 #define E1000_MDICNFG_EXT_MDIO    0x80000000      /* MDI ext/int destination */
 #define E1000_MDICNFG_COM_MDIO    0x40000000      /* MDI shared w/ lan 0 */
diff --git a/drivers/net/ethernet/intel/igb/e1000_regs.h b/drivers/net/ethernet/intel/igb/e1000_regs.h
index abdd935a9dad..e9c5fdd60f54 100644
--- a/drivers/net/ethernet/intel/igb/e1000_regs.h
+++ b/drivers/net/ethernet/intel/igb/e1000_regs.h
@@ -40,6 +40,7 @@
 #define E1000_FCT      0x00030  /* Flow Control Type - RW */
 #define E1000_CONNSW   0x00034  /* Copper/Fiber switch control - RW */
 #define E1000_VET      0x00038  /* VLAN Ether Type - RW */
+#define E1000_TSSDP    0x0003C  /* Time Sync SDP Configuration Register - RW */
 #define E1000_ICR      0x000C0  /* Interrupt Cause Read - R/clr */
 #define E1000_ITR      0x000C4  /* Interrupt Throttling Rate - RW */
 #define E1000_ICS      0x000C8  /* Interrupt Cause Set - WO */
@@ -101,6 +102,14 @@
 #define E1000_SYSTIMH    0x0B604 /* System time register High - RO */
 #define E1000_TIMINCA    0x0B608 /* Increment attributes register - RW */
 #define E1000_TSAUXC     0x0B640 /* Timesync Auxiliary Control register */
+#define E1000_TRGTTIML0  0x0B644 /* Target Time Register 0 Low  - RW */
+#define E1000_TRGTTIMH0  0x0B648 /* Target Time Register 0 High - RW */
+#define E1000_TRGTTIML1  0x0B64C /* Target Time Register 1 Low  - RW */
+#define E1000_TRGTTIMH1  0x0B650 /* Target Time Register 1 High - RW */
+#define E1000_AUXSTMPL0  0x0B65C /* Auxiliary Time Stamp 0 Register Low  - RO */
+#define E1000_AUXSTMPH0  0x0B660 /* Auxiliary Time Stamp 0 Register High - RO */
+#define E1000_AUXSTMPL1  0x0B664 /* Auxiliary Time Stamp 1 Register Low  - RO */
+#define E1000_AUXSTMPH1  0x0B668 /* Auxiliary Time Stamp 1 Register High - RO */
 #define E1000_SYSTIMR    0x0B6F8 /* System time register Residue */
 #define E1000_TSICR      0x0B66C /* Interrupt Cause Register */
 #define E1000_TSIM       0x0B674 /* Interrupt Mask Register */
diff --git a/drivers/net/ethernet/intel/igb/igb_ptp.c b/drivers/net/ethernet/intel/igb/igb_ptp.c
index 9c9c141f089a..a894551ae3c0 100644
--- a/drivers/net/ethernet/intel/igb/igb_ptp.c
+++ b/drivers/net/ethernet/intel/igb/igb_ptp.c
@@ -799,7 +799,7 @@ void igb_ptp_init(struct igb_adapter *adapter)
 
 	/* Initialize the time sync interrupts for devices that support it. */
 	if (hw->mac.type >= e1000_82580) {
-		wr32(E1000_TSIM, E1000_TSIM_TXTS);
+		wr32(E1000_TSIM, TSYNC_INTERRUPTS);
 		wr32(E1000_IMS, E1000_IMS_TS);
 	}
 
@@ -877,7 +877,7 @@ void igb_ptp_reset(struct igb_adapter *adapter)
 	case e1000_i211:
 		/* Enable the timer functions and interrupts. */
 		wr32(E1000_TSAUXC, 0x0);
-		wr32(E1000_TSIM, E1000_TSIM_TXTS);
+		wr32(E1000_TSIM, TSYNC_INTERRUPTS);
 		wr32(E1000_IMS, E1000_IMS_TS);
 		break;
 	default:
-- 
cgit v1.2.2


From ed19231c760a5103d75d285ca5a5ba4177ec09eb Mon Sep 17 00:00:00 2001
From: Jacob Keller <jacob.e.keller@intel.com>
Date: Sat, 22 Feb 2014 01:23:53 +0000
Subject: ixgbe: add ixgbe_write_pci_cfg_word with ixgbe_removed check

Inline with the current use for ixgbe_read_pci_cfg_word, create a
similar function for writing PCI config, which checks whether the
adapter has been removed first, if Live Error Recovery has been enabled.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c  | 6 +-----
 drivers/net/ethernet/intel/ixgbe/ixgbe_common.h | 1 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c   | 9 +++++++++
 3 files changed, 11 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
index f8ebe583a2ab..7fe22542e404 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
@@ -58,7 +58,6 @@ static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset,
  **/
 static void ixgbe_set_pcie_completion_timeout(struct ixgbe_hw *hw)
 {
-	struct ixgbe_adapter *adapter = hw->back;
 	u32 gcr = IXGBE_READ_REG(hw, IXGBE_GCR);
 	u16 pcie_devctl2;
 
@@ -84,11 +83,8 @@ static void ixgbe_set_pcie_completion_timeout(struct ixgbe_hw *hw)
 	 * 16ms to 55ms
 	 */
 	pcie_devctl2 = ixgbe_read_pci_cfg_word(hw, IXGBE_PCI_DEVICE_CONTROL2);
-	if (ixgbe_removed(hw->hw_addr))
-		return;
 	pcie_devctl2 |= IXGBE_PCI_DEVICE_CONTROL2_16ms;
-	pci_write_config_word(adapter->pdev,
-	                      IXGBE_PCI_DEVICE_CONTROL2, pcie_devctl2);
+	ixgbe_write_pci_cfg_word(hw, IXGBE_PCI_DEVICE_CONTROL2, pcie_devctl2);
 out:
 	/* disable completion timeout resend */
 	gcr &= ~IXGBE_GCR_CMPL_TMOUT_RESEND;
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
index d1d67ba54775..afa1cda90c2e 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
@@ -133,6 +133,7 @@ s32 ixgbe_init_thermal_sensor_thresh_generic(struct ixgbe_hw *hw);
 #define IXGBE_FAILED_READ_CFG_WORD 0xffffU
 
 u16 ixgbe_read_pci_cfg_word(struct ixgbe_hw *hw, u32 reg);
+void ixgbe_write_pci_cfg_word(struct ixgbe_hw *hw, u32 reg, u16 value);
 
 static inline bool ixgbe_removed(void __iomem *addr)
 {
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 18cd8ca319ea..c773d6cb6063 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -361,6 +361,15 @@ static u32 ixgbe_read_pci_cfg_dword(struct ixgbe_hw *hw, u32 reg)
 }
 #endif /* CONFIG_PCI_IOV */
 
+void ixgbe_write_pci_cfg_word(struct ixgbe_hw *hw, u32 reg, u16 value)
+{
+	struct ixgbe_adapter *adapter = hw->back;
+
+	if (ixgbe_removed(hw->hw_addr))
+		return;
+	pci_write_config_word(adapter->pdev, reg, value);
+}
+
 static void ixgbe_service_event_complete(struct ixgbe_adapter *adapter)
 {
 	BUG_ON(!test_bit(__IXGBE_SERVICE_SCHED, &adapter->state));
-- 
cgit v1.2.2


From 2e7cfbdde8412a95ea4b003a68c2737434f543bb Mon Sep 17 00:00:00 2001
From: Mark Rustad <mark.d.rustad@intel.com>
Date: Tue, 4 Mar 2014 03:02:13 +0000
Subject: ixgbevf: Indicate removal state explicitly

Add a bit, __IXGBEVF_REMOVING, to indicate that the module is being
removed. The __IXGBEVF_DOWN bit had been overloaded for this purpose,
but that leads to trouble. A few places now check both __IXGBEVF_DOWN
and __IXGBEVF_REMOVING.

Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbevf/ixgbevf.h      |  5 +++--
 drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 14 +++++++++-----
 2 files changed, 12 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf.h b/drivers/net/ethernet/intel/ixgbevf/ixgbevf.h
index 54829326bb09..08fb88aba67b 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf.h
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf.h
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel 82599 Virtual Function driver
-  Copyright(c) 1999 - 2012 Intel Corporation.
+  Copyright(c) 1999 - 2014 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -412,7 +412,8 @@ struct ixgbevf_adapter {
 enum ixbgevf_state_t {
 	__IXGBEVF_TESTING,
 	__IXGBEVF_RESETTING,
-	__IXGBEVF_DOWN
+	__IXGBEVF_DOWN,
+	__IXGBEVF_REMOVING,
 };
 
 struct ixgbevf_cb {
diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
index 8581079791fe..940d9244df62 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel 82599 Virtual Function driver
-  Copyright(c) 1999 - 2012 Intel Corporation.
+  Copyright(c) 1999 - 2014 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -608,7 +608,8 @@ static int ixgbevf_poll(struct napi_struct *napi, int budget)
 	napi_complete(napi);
 	if (adapter->rx_itr_setting & 1)
 		ixgbevf_set_itr(q_vector);
-	if (!test_bit(__IXGBEVF_DOWN, &adapter->state))
+	if (!test_bit(__IXGBEVF_DOWN, &adapter->state) &&
+	    !test_bit(__IXGBEVF_REMOVING, &adapter->state))
 		ixgbevf_irq_enable_queues(adapter,
 					  1 << q_vector->v_idx);
 
@@ -833,7 +834,8 @@ static irqreturn_t ixgbevf_msix_other(int irq, void *data)
 
 	hw->mac.get_link_status = 1;
 
-	if (!test_bit(__IXGBEVF_DOWN, &adapter->state))
+	if (!test_bit(__IXGBEVF_DOWN, &adapter->state) &&
+	    !test_bit(__IXGBEVF_REMOVING, &adapter->state))
 		mod_timer(&adapter->watchdog_timer, jiffies);
 
 	IXGBE_WRITE_REG(hw, IXGBE_VTEIMS, adapter->eims_other);
@@ -2329,6 +2331,7 @@ static void ixgbevf_reset_task(struct work_struct *work)
 
 	/* If we're already down or resetting, just bail */
 	if (test_bit(__IXGBEVF_DOWN, &adapter->state) ||
+	    test_bit(__IXGBEVF_REMOVING, &adapter->state) ||
 	    test_bit(__IXGBEVF_RESETTING, &adapter->state))
 		return;
 
@@ -2413,7 +2416,8 @@ static void ixgbevf_watchdog_task(struct work_struct *work)
 
 pf_has_reset:
 	/* Reset the timer */
-	if (!test_bit(__IXGBEVF_DOWN, &adapter->state))
+	if (!test_bit(__IXGBEVF_DOWN, &adapter->state) &&
+	    !test_bit(__IXGBEVF_REMOVING, &adapter->state))
 		mod_timer(&adapter->watchdog_timer,
 			  round_jiffies(jiffies + (2 * HZ)));
 
@@ -3563,7 +3567,7 @@ static void ixgbevf_remove(struct pci_dev *pdev)
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct ixgbevf_adapter *adapter = netdev_priv(netdev);
 
-	set_bit(__IXGBEVF_DOWN, &adapter->state);
+	set_bit(__IXGBEVF_REMOVING, &adapter->state);
 
 	del_timer_sync(&adapter->watchdog_timer);
 
-- 
cgit v1.2.2


From 5b346dc97567270a5c0f02a390a1d1bb65237cea Mon Sep 17 00:00:00 2001
From: Mark Rustad <mark.d.rustad@intel.com>
Date: Tue, 4 Mar 2014 03:02:18 +0000
Subject: ixgbevf: Protect ixgbevf_down with __IXGBEVF_DOWN bit

The ixgbevf_down function can now prevent multiple executions by
doing test_and_set_bit on __IXGBEVF_DOWN. This did not work before
introduction of the __IXGBEVF_REMOVING bit, because of overloading
of __IXGBEVF_DOWN. Also add smp_mb__before_clear_bit call before
clearing the __IXGBEVF_DOWN bit.

Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
index 940d9244df62..a2cba53c31be 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
@@ -1620,6 +1620,7 @@ static void ixgbevf_up_complete(struct ixgbevf_adapter *adapter)
 
 	spin_unlock_bh(&adapter->mbx_lock);
 
+	smp_mb__before_clear_bit();
 	clear_bit(__IXGBEVF_DOWN, &adapter->state);
 	ixgbevf_napi_enable_all(adapter);
 
@@ -1744,7 +1745,8 @@ void ixgbevf_down(struct ixgbevf_adapter *adapter)
 	int i;
 
 	/* signal that we are down to the interrupt handler */
-	set_bit(__IXGBEVF_DOWN, &adapter->state);
+	if (test_and_set_bit(__IXGBEVF_DOWN, &adapter->state))
+		return; /* do nothing if already down */
 
 	/* disable all enabled rx queues */
 	for (i = 0; i < adapter->num_rx_queues; i++)
-- 
cgit v1.2.2


From dc1edc67fe2da3d87b56cdffd5ef55c3a9af252c Mon Sep 17 00:00:00 2001
From: Stefan Assmann <sassmann@kpanic.de>
Date: Wed, 11 Dec 2013 22:10:12 +0000
Subject: igb: enable VLAN stripping for VMs with i350

For i350 VLAN stripping for VMs is not enabled in the VMOLR register but in
the DVMOLR register. Making the changes accordingly. It's not necessary to
unset the E1000_VMOLR_STRVLAN bit on i350 as the hardware will simply ignore
it.

Without this change if a VLAN is configured for a VF assigned to a guest
via (i.e.)
ip link set p1p1 vf 0 vlan 10
the VLAN tag will not be stripped from packets going into the VM. Which they
should be because the VM itself is not aware of the VLAN at all.

Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/igb/e1000_82575.h | 4 ++++
 drivers/net/ethernet/intel/igb/e1000_regs.h  | 1 +
 drivers/net/ethernet/intel/igb/igb_main.c    | 7 +++++++
 3 files changed, 12 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.h b/drivers/net/ethernet/intel/igb/e1000_82575.h
index 2a721a15afc1..09d78be72416 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.h
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.h
@@ -230,6 +230,10 @@ struct e1000_adv_tx_context_desc {
 #define E1000_VMOLR_STRVLAN    0x40000000 /* Vlan stripping enable */
 #define E1000_VMOLR_STRCRC     0x80000000 /* CRC stripping enable */
 
+#define E1000_DVMOLR_HIDEVLAN  0x20000000 /* Hide vlan enable */
+#define E1000_DVMOLR_STRVLAN   0x40000000 /* Vlan stripping enable */
+#define E1000_DVMOLR_STRCRC    0x80000000 /* CRC stripping enable */
+
 #define E1000_VLVF_ARRAY_SIZE     32
 #define E1000_VLVF_VLANID_MASK    0x00000FFF
 #define E1000_VLVF_POOLSEL_SHIFT  12
diff --git a/drivers/net/ethernet/intel/igb/e1000_regs.h b/drivers/net/ethernet/intel/igb/e1000_regs.h
index e9c5fdd60f54..d0f14be3d94f 100644
--- a/drivers/net/ethernet/intel/igb/e1000_regs.h
+++ b/drivers/net/ethernet/intel/igb/e1000_regs.h
@@ -357,6 +357,7 @@
 #define E1000_P2VMAILBOX(_n)   (0x00C00 + (4 * (_n)))
 #define E1000_VMBMEM(_n)       (0x00800 + (64 * (_n)))
 #define E1000_VMOLR(_n)        (0x05AD0 + (4 * (_n)))
+#define E1000_DVMOLR(_n)       (0x0C038 + (64 * (_n)))
 #define E1000_VLVF(_n)         (0x05D00 + (4 * (_n))) /* VLAN Virtual Machine
                                                        * Filter - RW */
 #define E1000_VMVIR(_n)        (0x03700 + (4 * (_n)))
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index ac06492fb816..313e1a87ea9f 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -3542,6 +3542,13 @@ static inline void igb_set_vmolr(struct igb_adapter *adapter,
 
 	vmolr = rd32(E1000_VMOLR(vfn));
 	vmolr |= E1000_VMOLR_STRVLAN; /* Strip vlan tags */
+	if (hw->mac.type == e1000_i350) {
+		u32 dvmolr;
+
+		dvmolr = rd32(E1000_DVMOLR(vfn));
+		dvmolr |= E1000_DVMOLR_STRVLAN;
+		wr32(E1000_DVMOLR(vfn), dvmolr);
+	}
 	if (aupe)
 		vmolr |= E1000_VMOLR_AUPE; /* Accept untagged packets */
 	else
-- 
cgit v1.2.2


From 3d2372eb146efdd9a31ac29cdfc9812fad4faa67 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Thu, 13 Mar 2014 05:19:09 +0000
Subject: e100: Convert uses of __constant_<foo> to <foo>

The use of __constant_<foo> has been unnecessary for quite awhile now.

Make these uses consistent with the rest of the kernel.

Signed-off-by: Joe Perches <joe@perches.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/e100.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/e100.c b/drivers/net/ethernet/intel/e100.c
index bf7a01ef9a57..b56461ce674c 100644
--- a/drivers/net/ethernet/intel/e100.c
+++ b/drivers/net/ethernet/intel/e100.c
@@ -1778,9 +1778,9 @@ static int e100_xmit_prepare(struct nic *nic, struct cb *cb,
 	 * testing, ie sending frames with bad CRC.
 	 */
 	if (unlikely(skb->no_fcs))
-		cb->command |= __constant_cpu_to_le16(cb_tx_nc);
+		cb->command |= cpu_to_le16(cb_tx_nc);
 	else
-		cb->command &= ~__constant_cpu_to_le16(cb_tx_nc);
+		cb->command &= ~cpu_to_le16(cb_tx_nc);
 
 	/* interrupt every 16 packets regardless of delay */
 	if ((nic->cbs_avail & ~15) == nic->cbs_avail)
-- 
cgit v1.2.2


From 7c4d16ffb79540dd157efe1eaebfa513f0ebdd9b Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Thu, 13 Mar 2014 05:19:14 +0000
Subject: igb: Convert uses of __constant_<foo> to <foo>

The use of __constant_<foo> has been unnecessary for quite awhile now.

Make these uses consistent with the rest of the kernel.

Signed-off-by: Joe Perches <joe@perches.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/igb/igb_main.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 313e1a87ea9f..17feea0ea2b0 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -4592,7 +4592,7 @@ static int igb_tso(struct igb_ring *tx_ring,
 	/* ADV DTYP TUCMD MKRLOC/ISCSIHEDLEN */
 	type_tucmd = E1000_ADVTXD_TUCMD_L4T_TCP;
 
-	if (first->protocol == __constant_htons(ETH_P_IP)) {
+	if (first->protocol == htons(ETH_P_IP)) {
 		struct iphdr *iph = ip_hdr(skb);
 		iph->tot_len = 0;
 		iph->check = 0;
@@ -4648,12 +4648,12 @@ static void igb_tx_csum(struct igb_ring *tx_ring, struct igb_tx_buffer *first)
 	} else {
 		u8 l4_hdr = 0;
 		switch (first->protocol) {
-		case __constant_htons(ETH_P_IP):
+		case htons(ETH_P_IP):
 			vlan_macip_lens |= skb_network_header_len(skb);
 			type_tucmd |= E1000_ADVTXD_TUCMD_IPV4;
 			l4_hdr = ip_hdr(skb)->protocol;
 			break;
-		case __constant_htons(ETH_P_IPV6):
+		case htons(ETH_P_IPV6):
 			vlan_macip_lens |= skb_network_header_len(skb);
 			l4_hdr = ipv6_hdr(skb)->nexthdr;
 			break;
@@ -6738,7 +6738,7 @@ static unsigned int igb_get_headlen(unsigned char *data,
 	hdr.network += ETH_HLEN;
 
 	/* handle any vlan tag if present */
-	if (protocol == __constant_htons(ETH_P_8021Q)) {
+	if (protocol == htons(ETH_P_8021Q)) {
 		if ((hdr.network - data) > (max_len - VLAN_HLEN))
 			return max_len;
 
@@ -6747,7 +6747,7 @@ static unsigned int igb_get_headlen(unsigned char *data,
 	}
 
 	/* handle L3 protocols */
-	if (protocol == __constant_htons(ETH_P_IP)) {
+	if (protocol == htons(ETH_P_IP)) {
 		if ((hdr.network - data) > (max_len - sizeof(struct iphdr)))
 			return max_len;
 
@@ -6761,7 +6761,7 @@ static unsigned int igb_get_headlen(unsigned char *data,
 		/* record next protocol if header is present */
 		if (!(hdr.ipv4->frag_off & htons(IP_OFFSET)))
 			nexthdr = hdr.ipv4->protocol;
-	} else if (protocol == __constant_htons(ETH_P_IPV6)) {
+	} else if (protocol == htons(ETH_P_IPV6)) {
 		if ((hdr.network - data) > (max_len - sizeof(struct ipv6hdr)))
 			return max_len;
 
-- 
cgit v1.2.2


From 1dcf875effe050013602ebb61a108ce5f19e0459 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Thu, 13 Mar 2014 05:19:19 +0000
Subject: igbvf: Convert uses of __constant_<foo> to <foo>

The use of __constant_<foo> has been unnecessary for quite awhile now.

Make these uses consistent with the rest of the kernel.

Signed-off-by: Joe Perches <joe@perches.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/igbvf/netdev.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/igbvf/netdev.c b/drivers/net/ethernet/intel/igbvf/netdev.c
index e2c6d8059b74..b7ab03a2f28f 100644
--- a/drivers/net/ethernet/intel/igbvf/netdev.c
+++ b/drivers/net/ethernet/intel/igbvf/netdev.c
@@ -2014,12 +2014,12 @@ static inline bool igbvf_tx_csum(struct igbvf_adapter *adapter,
 
 		if (skb->ip_summed == CHECKSUM_PARTIAL) {
 			switch (skb->protocol) {
-			case __constant_htons(ETH_P_IP):
+			case htons(ETH_P_IP):
 				tu_cmd |= E1000_ADVTXD_TUCMD_IPV4;
 				if (ip_hdr(skb)->protocol == IPPROTO_TCP)
 					tu_cmd |= E1000_ADVTXD_TUCMD_L4T_TCP;
 				break;
-			case __constant_htons(ETH_P_IPV6):
+			case htons(ETH_P_IPV6):
 				if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
 					tu_cmd |= E1000_ADVTXD_TUCMD_L4T_TCP;
 				break;
-- 
cgit v1.2.2


From a1108ffd18c6e4f09b2d45b5ee151b10d52af4da Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Thu, 13 Mar 2014 05:19:25 +0000
Subject: ixgbe: Convert uses of __constant_<foo> to <foo>

The use of __constant_<foo> has been unnecessary for quite awhile now.

Make these uses consistent with the rest of the kernel.

Signed-off-by: Joe Perches <joe@perches.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c |  8 +++----
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 30 +++++++++++++--------------
 2 files changed, 19 insertions(+), 19 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
index 39557e3498a2..25a3dfef33e8 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
@@ -408,13 +408,13 @@ int ixgbe_fcoe_ddp(struct ixgbe_adapter *adapter,
 
 	switch (ixgbe_test_staterr(rx_desc, IXGBE_RXDADV_STAT_FCSTAT)) {
 	/* return 0 to bypass going to ULD for DDPed data */
-	case __constant_cpu_to_le32(IXGBE_RXDADV_STAT_FCSTAT_DDP):
+	case cpu_to_le32(IXGBE_RXDADV_STAT_FCSTAT_DDP):
 		/* update length of DDPed data */
 		ddp->len = le32_to_cpu(rx_desc->wb.lower.hi_dword.rss);
 		rc = 0;
 		break;
 	/* unmap the sg list when FCPRSP is received */
-	case __constant_cpu_to_le32(IXGBE_RXDADV_STAT_FCSTAT_FCPRSP):
+	case cpu_to_le32(IXGBE_RXDADV_STAT_FCSTAT_FCPRSP):
 		dma_unmap_sg(&adapter->pdev->dev, ddp->sgl,
 			     ddp->sgc, DMA_FROM_DEVICE);
 		ddp->err = ddp_err;
@@ -422,14 +422,14 @@ int ixgbe_fcoe_ddp(struct ixgbe_adapter *adapter,
 		ddp->sgc = 0;
 		/* fall through */
 	/* if DDP length is present pass it through to ULD */
-	case __constant_cpu_to_le32(IXGBE_RXDADV_STAT_FCSTAT_NODDP):
+	case cpu_to_le32(IXGBE_RXDADV_STAT_FCSTAT_NODDP):
 		/* update length of DDPed data */
 		ddp->len = le32_to_cpu(rx_desc->wb.lower.hi_dword.rss);
 		if (ddp->len)
 			rc = ddp->len;
 		break;
 	/* no match will return as an error */
-	case __constant_cpu_to_le32(IXGBE_RXDADV_STAT_FCSTAT_NOMTCH):
+	case cpu_to_le32(IXGBE_RXDADV_STAT_FCSTAT_NOMTCH):
 	default:
 		break;
 	}
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index c773d6cb6063..02271f6d9a17 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -1539,7 +1539,7 @@ static unsigned int ixgbe_get_headlen(unsigned char *data,
 	hdr.network += ETH_HLEN;
 
 	/* handle any vlan tag if present */
-	if (protocol == __constant_htons(ETH_P_8021Q)) {
+	if (protocol == htons(ETH_P_8021Q)) {
 		if ((hdr.network - data) > (max_len - VLAN_HLEN))
 			return max_len;
 
@@ -1548,7 +1548,7 @@ static unsigned int ixgbe_get_headlen(unsigned char *data,
 	}
 
 	/* handle L3 protocols */
-	if (protocol == __constant_htons(ETH_P_IP)) {
+	if (protocol == htons(ETH_P_IP)) {
 		if ((hdr.network - data) > (max_len - sizeof(struct iphdr)))
 			return max_len;
 
@@ -1562,7 +1562,7 @@ static unsigned int ixgbe_get_headlen(unsigned char *data,
 		/* record next protocol if header is present */
 		if (!(hdr.ipv4->frag_off & htons(IP_OFFSET)))
 			nexthdr = hdr.ipv4->protocol;
-	} else if (protocol == __constant_htons(ETH_P_IPV6)) {
+	} else if (protocol == htons(ETH_P_IPV6)) {
 		if ((hdr.network - data) > (max_len - sizeof(struct ipv6hdr)))
 			return max_len;
 
@@ -1570,7 +1570,7 @@ static unsigned int ixgbe_get_headlen(unsigned char *data,
 		nexthdr = hdr.ipv6->nexthdr;
 		hlen = sizeof(struct ipv6hdr);
 #ifdef IXGBE_FCOE
-	} else if (protocol == __constant_htons(ETH_P_FCOE)) {
+	} else if (protocol == htons(ETH_P_FCOE)) {
 		if ((hdr.network - data) > (max_len - FCOE_HEADER_LEN))
 			return max_len;
 		hlen = FCOE_HEADER_LEN;
@@ -6520,7 +6520,7 @@ static int ixgbe_tso(struct ixgbe_ring *tx_ring,
 	/* ADV DTYP TUCMD MKRLOC/ISCSIHEDLEN */
 	type_tucmd = IXGBE_ADVTXD_TUCMD_L4T_TCP;
 
-	if (first->protocol == __constant_htons(ETH_P_IP)) {
+	if (first->protocol == htons(ETH_P_IP)) {
 		struct iphdr *iph = ip_hdr(skb);
 		iph->tot_len = 0;
 		iph->check = 0;
@@ -6580,12 +6580,12 @@ static void ixgbe_tx_csum(struct ixgbe_ring *tx_ring,
 	} else {
 		u8 l4_hdr = 0;
 		switch (first->protocol) {
-		case __constant_htons(ETH_P_IP):
+		case htons(ETH_P_IP):
 			vlan_macip_lens |= skb_network_header_len(skb);
 			type_tucmd |= IXGBE_ADVTXD_TUCMD_IPV4;
 			l4_hdr = ip_hdr(skb)->protocol;
 			break;
-		case __constant_htons(ETH_P_IPV6):
+		case htons(ETH_P_IPV6):
 			vlan_macip_lens |= skb_network_header_len(skb);
 			l4_hdr = ipv6_hdr(skb)->nexthdr;
 			break;
@@ -6860,9 +6860,9 @@ static void ixgbe_atr(struct ixgbe_ring *ring,
 	hdr.network = skb_network_header(first->skb);
 
 	/* Currently only IPv4/IPv6 with TCP is supported */
-	if ((first->protocol != __constant_htons(ETH_P_IPV6) ||
+	if ((first->protocol != htons(ETH_P_IPV6) ||
 	     hdr.ipv6->nexthdr != IPPROTO_TCP) &&
-	    (first->protocol != __constant_htons(ETH_P_IP) ||
+	    (first->protocol != htons(ETH_P_IP) ||
 	     hdr.ipv4->protocol != IPPROTO_TCP))
 		return;
 
@@ -6895,12 +6895,12 @@ static void ixgbe_atr(struct ixgbe_ring *ring,
 	 * and write the value to source port portion of compressed dword
 	 */
 	if (first->tx_flags & (IXGBE_TX_FLAGS_SW_VLAN | IXGBE_TX_FLAGS_HW_VLAN))
-		common.port.src ^= th->dest ^ __constant_htons(ETH_P_8021Q);
+		common.port.src ^= th->dest ^ htons(ETH_P_8021Q);
 	else
 		common.port.src ^= th->dest ^ first->protocol;
 	common.port.dst ^= th->source;
 
-	if (first->protocol == __constant_htons(ETH_P_IP)) {
+	if (first->protocol == htons(ETH_P_IP)) {
 		input.formatted.flow_type = IXGBE_ATR_FLOW_TYPE_TCPV4;
 		common.ip ^= hdr.ipv4->saddr ^ hdr.ipv4->daddr;
 	} else {
@@ -6966,8 +6966,8 @@ static u16 ixgbe_select_queue(struct net_device *dev, struct sk_buff *skb,
 	 * or FIP and we have FCoE enabled on the adapter
 	 */
 	switch (vlan_get_protocol(skb)) {
-	case __constant_htons(ETH_P_FCOE):
-	case __constant_htons(ETH_P_FIP):
+	case htons(ETH_P_FCOE):
+	case htons(ETH_P_FIP):
 		adapter = netdev_priv(dev);
 
 		if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED)
@@ -7028,7 +7028,7 @@ netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb,
 		tx_flags |= vlan_tx_tag_get(skb) << IXGBE_TX_FLAGS_VLAN_SHIFT;
 		tx_flags |= IXGBE_TX_FLAGS_HW_VLAN;
 	/* else if it is a SW VLAN check the next protocol and store the tag */
-	} else if (protocol == __constant_htons(ETH_P_8021Q)) {
+	} else if (protocol == htons(ETH_P_8021Q)) {
 		struct vlan_hdr *vhdr, _vhdr;
 		vhdr = skb_header_pointer(skb, ETH_HLEN, sizeof(_vhdr), &_vhdr);
 		if (!vhdr)
@@ -7087,7 +7087,7 @@ netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb,
 
 #ifdef IXGBE_FCOE
 	/* setup tx offload for FCoE */
-	if ((protocol == __constant_htons(ETH_P_FCOE)) &&
+	if ((protocol == htons(ETH_P_FCOE)) &&
 	    (tx_ring->netdev->features & (NETIF_F_FSO | NETIF_F_FCOE_CRC))) {
 		tso = ixgbe_fso(tx_ring, first, &hdr_len);
 		if (tso < 0)
-- 
cgit v1.2.2


From 0933ce4a9d68ae35dccfa592fa361c149df5d1af Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Thu, 13 Mar 2014 05:19:30 +0000
Subject: ixgbevf: Convert uses of __constant_<foo> to <foo>

The use of __constant_<foo> has been unnecessary for quite awhile now.

Make these uses consistent with the rest of the kernel.

Signed-off-by: Joe Perches <joe@perches.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
index a2cba53c31be..592d8a6baabc 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
@@ -2857,12 +2857,12 @@ static void ixgbevf_tx_csum(struct ixgbevf_ring *tx_ring,
 	if (skb->ip_summed == CHECKSUM_PARTIAL) {
 		u8 l4_hdr = 0;
 		switch (skb->protocol) {
-		case __constant_htons(ETH_P_IP):
+		case htons(ETH_P_IP):
 			vlan_macip_lens |= skb_network_header_len(skb);
 			type_tucmd |= IXGBE_ADVTXD_TUCMD_IPV4;
 			l4_hdr = ip_hdr(skb)->protocol;
 			break;
-		case __constant_htons(ETH_P_IPV6):
+		case htons(ETH_P_IPV6):
 			vlan_macip_lens |= skb_network_header_len(skb);
 			l4_hdr = ipv6_hdr(skb)->nexthdr;
 			break;
-- 
cgit v1.2.2


From f8cf7a00d82b6c7b984adc917199cb63552957fb Mon Sep 17 00:00:00 2001
From: Don Skidmore <donald.c.skidmore@intel.com>
Date: Wed, 19 Mar 2014 09:16:26 +0000
Subject: ixgbe: fix errors related to protected AUTOC calls

Found several incorrect conditionals after calling the prot_autoc_*
functions. Likewise we weren't always freeing the FWSW semaphore after
grabbing it.   This would lead to DA cables being unable to link along with
possible other errors.

CC: Arun Sharma <asharma@fb.com>
CC: Emil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c  | 10 ++++++----
 drivers/net/ethernet/intel/ixgbe/ixgbe_common.c | 10 +++++-----
 2 files changed, 11 insertions(+), 9 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
index 3bc9b6718875..572cce47797c 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
@@ -210,7 +210,7 @@ static s32 prot_autoc_read_82599(struct ixgbe_hw *hw, bool *locked,
 	if (ixgbe_verify_lesm_fw_enabled_82599(hw)) {
 		ret_val = hw->mac.ops.acquire_swfw_sync(hw,
 					IXGBE_GSSR_MAC_CSR_SM);
-		if (!ret_val)
+		if (ret_val)
 			return IXGBE_ERR_SWFW_SYNC;
 
 		*locked = true;
@@ -245,8 +245,10 @@ static s32 prot_autoc_write_82599(struct ixgbe_hw *hw, u32 autoc, bool locked)
 	if (!locked && ixgbe_verify_lesm_fw_enabled_82599(hw)) {
 		ret_val = hw->mac.ops.acquire_swfw_sync(hw,
 					IXGBE_GSSR_MAC_CSR_SM);
-		if (!ret_val)
+		if (ret_val)
 			return IXGBE_ERR_SWFW_SYNC;
+
+		locked = true;
 	}
 
 	IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc);
@@ -1094,7 +1096,7 @@ static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw,
 	if (autoc != start_autoc) {
 		/* Restart link */
 		status = hw->mac.ops.prot_autoc_write(hw, autoc, false);
-		if (!status)
+		if (status)
 			goto out;
 
 		/* Only poll for autoneg to complete if specified to do so */
@@ -1277,7 +1279,7 @@ mac_reset_top:
 			status = hw->mac.ops.prot_autoc_write(hw,
 							hw->mac.orig_autoc,
 							false);
-			if (!status)
+			if (status)
 				goto reset_hw_out;
 		}
 
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
index 6149c6574106..38ca24079980 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
@@ -143,7 +143,7 @@ static s32 ixgbe_setup_fc(struct ixgbe_hw *hw)
 	case ixgbe_media_type_backplane:
 		/* some MAC's need RMW protection on AUTOC */
 		ret_val = hw->mac.ops.prot_autoc_read(hw, &locked, &reg_bp);
-		if (!ret_val)
+		if (ret_val)
 			goto out;
 
 		/* only backplane uses autoc so fall though */
@@ -2723,14 +2723,14 @@ s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index)
 
 	if (!link_up) {
 		ret_val = hw->mac.ops.prot_autoc_read(hw, &locked, &autoc_reg);
-		if (!ret_val)
+		if (ret_val)
 			goto out;
 
 		autoc_reg |= IXGBE_AUTOC_AN_RESTART;
 		autoc_reg |= IXGBE_AUTOC_FLU;
 
 		ret_val = hw->mac.ops.prot_autoc_write(hw, autoc_reg, locked);
-		if (!ret_val)
+		if (ret_val)
 			goto out;
 
 		IXGBE_WRITE_FLUSH(hw);
@@ -2760,14 +2760,14 @@ s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index)
 	bool locked = false;
 
 	ret_val = hw->mac.ops.prot_autoc_read(hw, &locked, &autoc_reg);
-	if (!ret_val)
+	if (ret_val)
 		goto out;
 
 	autoc_reg &= ~IXGBE_AUTOC_FLU;
 	autoc_reg |= IXGBE_AUTOC_AN_RESTART;
 
 	ret_val = hw->mac.ops.prot_autoc_write(hw, autoc_reg, locked);
-	if (!ret_val)
+	if (ret_val)
 		goto out;
 
 	led_reg &= ~IXGBE_LED_MODE_MASK(index);
-- 
cgit v1.2.2


From f68bfdb14becbce565d72ff2e8571dbb3081db9c Mon Sep 17 00:00:00 2001
From: Jacob Keller <jacob.e.keller@intel.com>
Date: Sat, 22 Feb 2014 01:23:54 +0000
Subject: ixgbe: check Core Clock Disable bit

This patch corrects the stop_mac_link_on_d3 function in ixgbe_82599 by
checking the Core Clock Disable bit before stopping link.

CC: Arun Sharma <asharma@fb.com>
Reported-by: Chris Pavlas <chris.pavlas@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c | 6 +++++-
 drivers/net/ethernet/intel/ixgbe/ixgbe_type.h  | 3 +++
 2 files changed, 8 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
index 572cce47797c..fcba1d9734f9 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
@@ -518,8 +518,12 @@ out:
 static void ixgbe_stop_mac_link_on_d3_82599(struct ixgbe_hw *hw)
 {
 	u32 autoc2_reg;
+	u16 ee_ctrl_2 = 0;
 
-	if (!hw->mng_fw_enabled && !hw->wol_enabled) {
+	hw->eeprom.ops.read(hw, IXGBE_EEPROM_CTRL_2, &ee_ctrl_2);
+
+	if (!hw->mng_fw_enabled && !hw->wol_enabled &&
+	    ee_ctrl_2 & IXGBE_EEPROM_CCD_BIT) {
 		autoc2_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
 		autoc2_reg |= IXGBE_AUTOC2_LINK_DISABLE_ON_D3_MASK;
 		IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2_reg);
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
index 69271bc1b227..5b0c73079991 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
@@ -1793,6 +1793,9 @@ enum {
 #define IXGBE_EEPROM_RD_BUFFER_MAX_COUNT 512 /* EEPROM words # read in burst */
 #define IXGBE_EEPROM_WR_BUFFER_MAX_COUNT 256 /* EEPROM words # wr in burst */
 
+#define IXGBE_EEPROM_CTRL_2	1 /* EEPROM CTRL word 2 */
+#define IXGBE_EEPROM_CCD_BIT	2 /* EEPROM Core Clock Disable bit */
+
 #ifndef IXGBE_EEPROM_GRANT_ATTEMPTS
 #define IXGBE_EEPROM_GRANT_ATTEMPTS 1000 /* EEPROM # attempts to gain grant */
 #endif
-- 
cgit v1.2.2


From 8036d29f409f6a1d54ac409ede273197c4914e3f Mon Sep 17 00:00:00 2001
From: Jacob Keller <jacob.e.keller@intel.com>
Date: Sat, 22 Feb 2014 01:23:55 +0000
Subject: ixgbe: fix ixgbe_stop_mac_link_on_d3_82599 to check mng correctly

Previously, we did a full check to see if MNG FW was running. Instead,
we should only check to see whether it could be enabled. Since it may
become active while down, we don't want to bring the link down.

CC: Arun Sharma <asharma@fb.com>
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
index fcba1d9734f9..ef808bcec276 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
@@ -517,12 +517,16 @@ out:
  **/
 static void ixgbe_stop_mac_link_on_d3_82599(struct ixgbe_hw *hw)
 {
-	u32 autoc2_reg;
+	u32 autoc2_reg, fwsm;
 	u16 ee_ctrl_2 = 0;
 
 	hw->eeprom.ops.read(hw, IXGBE_EEPROM_CTRL_2, &ee_ctrl_2);
 
-	if (!hw->mng_fw_enabled && !hw->wol_enabled &&
+	/* Check to see if MNG FW could be enabled */
+	fwsm = IXGBE_READ_REG(hw, IXGBE_FWSM);
+
+	if (((fwsm & IXGBE_FWSM_MODE_MASK) != IXGBE_FWSM_FW_MODE_PT) &&
+	    !hw->wol_enabled &&
 	    ee_ctrl_2 & IXGBE_EEPROM_CCD_BIT) {
 		autoc2_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
 		autoc2_reg |= IXGBE_AUTOC2_LINK_DISABLE_ON_D3_MASK;
-- 
cgit v1.2.2


From ee98b577e7711d5890ded2c7b05578a29512bd39 Mon Sep 17 00:00:00 2001
From: Jacob Keller <jacob.e.keller@intel.com>
Date: Sat, 22 Feb 2014 01:23:56 +0000
Subject: ixgbe: fix ixgbe_setup_mac_link_82599 autoc variables

This patch fixes flow control autonegotiation for KR/KX/K4 interfaces.
When setting up MAC link, the cached autoc value and current autoc value
were being incorrectly used to determine whether link reset is required.
This resulted in the driver ignoring and discarding flow control
negotiation changes that occur since the caching happened, as well as
when the mac was being setup.

This patch also splits the assignments for the 3 autoc variables into
their own block, and adds a comment explaining what each one means, in
order to help keep logic more straightforward while reading the code.

CC: Arun Sharma <asharma@fb.com>
Reported-by: Sourav Chatterjee <sourav.chatterjee@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c | 22 ++++++++++++----------
 1 file changed, 12 insertions(+), 10 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
index ef808bcec276..e0fe8e88fbfa 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
@@ -1031,15 +1031,19 @@ static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw,
 				      ixgbe_link_speed speed,
 				      bool autoneg_wait_to_complete)
 {
+	bool autoneg = false;
 	s32 status = 0;
-	u32 autoc, pma_pmd_1g, link_mode, start_autoc;
+	u32 pma_pmd_1g, link_mode, links_reg, i;
 	u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
-	u32 orig_autoc = 0;
 	u32 pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK;
-	u32 links_reg;
-	u32 i;
 	ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN;
-	bool autoneg = false;
+
+	/* holds the value of AUTOC register at this current point in time */
+	u32 current_autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+	/* holds the cached value of AUTOC register */
+	u32 orig_autoc = 0;
+	/* temporary variable used for comparison purposes */
+	u32 autoc = current_autoc;
 
 	/* Check to see if speed passed in is supported. */
 	status = hw->mac.ops.get_link_capabilities(hw, &link_capabilities,
@@ -1056,12 +1060,10 @@ static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw,
 
 	/* Use stored value (EEPROM defaults) of AUTOC to find KR/KX4 support*/
 	if (hw->mac.orig_link_settings_stored)
-		autoc = hw->mac.orig_autoc;
+		orig_autoc = hw->mac.orig_autoc;
 	else
-		autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+		orig_autoc = autoc;
 
-	orig_autoc = autoc;
-	start_autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
 	link_mode = autoc & IXGBE_AUTOC_LMS_MASK;
 	pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK;
 
@@ -1101,7 +1103,7 @@ static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw,
 		}
 	}
 
-	if (autoc != start_autoc) {
+	if (autoc != current_autoc) {
 		/* Restart link */
 		status = hw->mac.ops.prot_autoc_write(hw, autoc, false);
 		if (status)
-- 
cgit v1.2.2


From cbcc637059f0c4ba539e8e8a3be378c6329ac8e2 Mon Sep 17 00:00:00 2001
From: Jacob Keller <jacob.e.keller@intel.com>
Date: Sat, 22 Feb 2014 01:23:57 +0000
Subject: ixgbe: remove unused media type

This patch reverts the addition of the fiber_fixed type, which ended up
never being used. We don't have plans to support this type going
forward, and there is no reason to keep an unused type around polluting
the code.

Reverts: 4e8e1bca6e2 ("ixgbe: add new media type")
CC: Arun Sharma <asharma@fb.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c  | 73 -------------------------
 drivers/net/ethernet/intel/ixgbe/ixgbe_common.c |  3 -
 drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h    |  4 --
 drivers/net/ethernet/intel/ixgbe/ixgbe_type.h   |  1 -
 4 files changed, 81 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
index e0fe8e88fbfa..bdac7bd1725a 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
@@ -663,75 +663,6 @@ static void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
 	}
 }
 
-/**
- *  ixgbe_set_fiber_fixed_speed - Set module link speed for fixed fiber
- *  @hw: pointer to hardware structure
- *  @speed: link speed to set
- *
- *  We set the module speed differently for fixed fiber.  For other
- *  multi-speed devices we don't have an error value so here if we
- *  detect an error we just log it and exit.
- */
-static void ixgbe_set_fiber_fixed_speed(struct ixgbe_hw *hw,
-					ixgbe_link_speed speed)
-{
-	s32 status;
-	u8 rs, eeprom_data;
-
-	switch (speed) {
-	case IXGBE_LINK_SPEED_10GB_FULL:
-		/* one bit mask same as setting on */
-		rs = IXGBE_SFF_SOFT_RS_SELECT_10G;
-		break;
-	case IXGBE_LINK_SPEED_1GB_FULL:
-		rs = IXGBE_SFF_SOFT_RS_SELECT_1G;
-		break;
-	default:
-		hw_dbg(hw, "Invalid fixed module speed\n");
-		return;
-	}
-
-	/* Set RS0 */
-	status = hw->phy.ops.read_i2c_byte(hw, IXGBE_SFF_SFF_8472_OSCB,
-					   IXGBE_I2C_EEPROM_DEV_ADDR2,
-					   &eeprom_data);
-	if (status) {
-		hw_dbg(hw, "Failed to read Rx Rate Select RS0\n");
-		goto out;
-	}
-
-	eeprom_data = (eeprom_data & ~IXGBE_SFF_SOFT_RS_SELECT_MASK) | rs;
-
-	status = hw->phy.ops.write_i2c_byte(hw, IXGBE_SFF_SFF_8472_OSCB,
-					    IXGBE_I2C_EEPROM_DEV_ADDR2,
-					    eeprom_data);
-	if (status) {
-		hw_dbg(hw, "Failed to write Rx Rate Select RS0\n");
-		goto out;
-	}
-
-	/* Set RS1 */
-	status = hw->phy.ops.read_i2c_byte(hw, IXGBE_SFF_SFF_8472_ESCB,
-					   IXGBE_I2C_EEPROM_DEV_ADDR2,
-					   &eeprom_data);
-	if (status) {
-		hw_dbg(hw, "Failed to read Rx Rate Select RS1\n");
-		goto out;
-	}
-
-	eeprom_data = (eeprom_data & ~IXGBE_SFF_SOFT_RS_SELECT_MASK) & rs;
-
-	status = hw->phy.ops.write_i2c_byte(hw, IXGBE_SFF_SFF_8472_ESCB,
-					    IXGBE_I2C_EEPROM_DEV_ADDR2,
-					    eeprom_data);
-	if (status) {
-		hw_dbg(hw, "Failed to write Rx Rate Select RS1\n");
-		goto out;
-	}
-out:
-	return;
-}
-
 /**
  *  ixgbe_setup_mac_link_multispeed_fiber - Set MAC link speed
  *  @hw: pointer to hardware structure
@@ -842,10 +773,6 @@ static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
 
 		/* Set the module link speed */
 		switch (hw->phy.media_type) {
-		case ixgbe_media_type_fiber_fixed:
-			ixgbe_set_fiber_fixed_speed(hw,
-						IXGBE_LINK_SPEED_1GB_FULL);
-			break;
 		case ixgbe_media_type_fiber:
 			esdp_reg &= ~IXGBE_ESDP_SDP5;
 			esdp_reg |= IXGBE_ESDP_SDP5_DIR;
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
index 38ca24079980..7a9d8744408f 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
@@ -73,7 +73,6 @@ bool ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw)
 	bool link_up;
 
 	switch (hw->phy.media_type) {
-	case ixgbe_media_type_fiber_fixed:
 	case ixgbe_media_type_fiber:
 		hw->mac.ops.check_link(hw, &speed, &link_up, false);
 		/* if link is down, assume supported */
@@ -147,7 +146,6 @@ static s32 ixgbe_setup_fc(struct ixgbe_hw *hw)
 			goto out;
 
 		/* only backplane uses autoc so fall though */
-	case ixgbe_media_type_fiber_fixed:
 	case ixgbe_media_type_fiber:
 		reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA);
 
@@ -2398,7 +2396,6 @@ void ixgbe_fc_autoneg(struct ixgbe_hw *hw)
 
 	switch (hw->phy.media_type) {
 	/* Autoneg flow control on fiber adapters */
-	case ixgbe_media_type_fiber_fixed:
 	case ixgbe_media_type_fiber:
 		if (speed == IXGBE_LINK_SPEED_1GB_FULL)
 			ret_val = ixgbe_fc_autoneg_fiber(hw);
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
index 478eca9761ca..4a456c974ef2 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
@@ -66,9 +66,6 @@
 #define IXGBE_SFF_1GBASET_CAPABLE		0x8
 #define IXGBE_SFF_10GBASESR_CAPABLE		0x10
 #define IXGBE_SFF_10GBASELR_CAPABLE		0x20
-#define IXGBE_SFF_SOFT_RS_SELECT_MASK		0x8
-#define IXGBE_SFF_SOFT_RS_SELECT_10G		0x8
-#define IXGBE_SFF_SOFT_RS_SELECT_1G		0x0
 #define IXGBE_SFF_ADDRESSING_MODE		0x4
 #define IXGBE_SFF_QSFP_DA_ACTIVE_CABLE		0x1
 #define IXGBE_SFF_QSFP_DA_PASSIVE_CABLE		0x8
@@ -80,7 +77,6 @@
 #define IXGBE_I2C_EEPROM_STATUS_PASS		0x1
 #define IXGBE_I2C_EEPROM_STATUS_FAIL		0x2
 #define IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS	0x3
-
 /* Flow control defines */
 #define IXGBE_TAF_SYM_PAUSE                  0x400
 #define IXGBE_TAF_ASM_PAUSE                  0x800
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
index 5b0c73079991..b5408eb8670b 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
@@ -2664,7 +2664,6 @@ enum ixgbe_sfp_type {
 enum ixgbe_media_type {
 	ixgbe_media_type_unknown = 0,
 	ixgbe_media_type_fiber,
-	ixgbe_media_type_fiber_fixed,
 	ixgbe_media_type_fiber_qsfp,
 	ixgbe_media_type_fiber_lco,
 	ixgbe_media_type_copper,
-- 
cgit v1.2.2


From 0d7c6e008e3f5b38e9126e7baeb35ce84581911a Mon Sep 17 00:00:00 2001
From: Jacob Keller <jacob.e.keller@intel.com>
Date: Sat, 22 Feb 2014 01:23:58 +0000
Subject: ixgbe: use ixgbe_read_pci_cfg_word

This patch replaces some direct uses of pci_read_config_word with the
protected ixgbe_read_pci_cfg_word function, which checks for whether the
adapter is removed when LER is enabled. We shouldn't use the
pci_read_config_word calls directly because of these checks.

This patch also cleans up an unnecessary save of a pointer to the mac
object, as our standard style is to just use the hw pointer.

CC: Arun Sharma <asharma@fb.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_common.c | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
index 7a9d8744408f..911b711b6ba1 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
@@ -646,20 +646,17 @@ enum ixgbe_bus_speed ixgbe_convert_bus_speed(u16 link_status)
  **/
 s32 ixgbe_get_bus_info_generic(struct ixgbe_hw *hw)
 {
-	struct ixgbe_adapter *adapter = hw->back;
-	struct ixgbe_mac_info *mac = &hw->mac;
 	u16 link_status;
 
 	hw->bus.type = ixgbe_bus_type_pci_express;
 
 	/* Get the negotiated link width and speed from PCI config space */
-	pci_read_config_word(adapter->pdev, IXGBE_PCI_LINK_STATUS,
-	                     &link_status);
+	link_status = ixgbe_read_pci_cfg_word(hw, IXGBE_PCI_LINK_STATUS);
 
 	hw->bus.width = ixgbe_convert_bus_width(link_status);
 	hw->bus.speed = ixgbe_convert_bus_speed(link_status);
 
-	mac->ops.set_lan_id(hw);
+	hw->mac.ops.set_lan_id(hw);
 
 	return 0;
 }
@@ -2437,12 +2434,10 @@ out:
  **/
 static u32 ixgbe_pcie_timeout_poll(struct ixgbe_hw *hw)
 {
-	struct ixgbe_adapter *adapter = hw->back;
 	s16 devctl2;
 	u32 pollcnt;
 
-	pci_read_config_word(adapter->pdev, IXGBE_PCI_DEVICE_CONTROL2,
-			     &devctl2);
+	devctl2 = ixgbe_read_pci_cfg_word(hw, IXGBE_PCI_DEVICE_CONTROL2);
 	devctl2 &= IXGBE_PCIDEVCTRL2_TIMEO_MASK;
 
 	switch (devctl2) {
-- 
cgit v1.2.2


From 65ce9dcd4752e6e035241b3746409e337821dd93 Mon Sep 17 00:00:00 2001
From: Jacob Keller <jacob.e.keller@intel.com>
Date: Sat, 22 Feb 2014 01:23:59 +0000
Subject: ixgbe: clean up ixgbe_atr_compute_perfect_hash_82599

Rather than assign several parameters in a row, we should use a for
loop, which reduces code size.

CC: Arun Sharma <asharma@fb.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c | 46 +++++---------------------
 1 file changed, 9 insertions(+), 37 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
index bdac7bd1725a..34ab2fca2ee3 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
@@ -1597,35 +1597,20 @@ void ixgbe_atr_compute_perfect_hash_82599(union ixgbe_atr_input *input,
 {
 
 	u32 hi_hash_dword, lo_hash_dword, flow_vm_vlan;
-	u32 bucket_hash = 0;
+	u32 bucket_hash = 0, hi_dword = 0;
+	int i;
 
 	/* Apply masks to input data */
-	input->dword_stream[0]  &= input_mask->dword_stream[0];
-	input->dword_stream[1]  &= input_mask->dword_stream[1];
-	input->dword_stream[2]  &= input_mask->dword_stream[2];
-	input->dword_stream[3]  &= input_mask->dword_stream[3];
-	input->dword_stream[4]  &= input_mask->dword_stream[4];
-	input->dword_stream[5]  &= input_mask->dword_stream[5];
-	input->dword_stream[6]  &= input_mask->dword_stream[6];
-	input->dword_stream[7]  &= input_mask->dword_stream[7];
-	input->dword_stream[8]  &= input_mask->dword_stream[8];
-	input->dword_stream[9]  &= input_mask->dword_stream[9];
-	input->dword_stream[10] &= input_mask->dword_stream[10];
+	for (i = 0; i <= 10; i++)
+		input->dword_stream[i] &= input_mask->dword_stream[i];
 
 	/* record the flow_vm_vlan bits as they are a key part to the hash */
 	flow_vm_vlan = ntohl(input->dword_stream[0]);
 
 	/* generate common hash dword */
-	hi_hash_dword = ntohl(input->dword_stream[1] ^
-				    input->dword_stream[2] ^
-				    input->dword_stream[3] ^
-				    input->dword_stream[4] ^
-				    input->dword_stream[5] ^
-				    input->dword_stream[6] ^
-				    input->dword_stream[7] ^
-				    input->dword_stream[8] ^
-				    input->dword_stream[9] ^
-				    input->dword_stream[10]);
+	for (i = 1; i <= 10; i++)
+		hi_dword ^= input->dword_stream[i];
+	hi_hash_dword = ntohl(hi_dword);
 
 	/* low dword is word swapped version of common */
 	lo_hash_dword = (hi_hash_dword >> 16) | (hi_hash_dword << 16);
@@ -1644,21 +1629,8 @@ void ixgbe_atr_compute_perfect_hash_82599(union ixgbe_atr_input *input,
 	lo_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan << 16);
 
 	/* Process remaining 30 bit of the key */
-	IXGBE_COMPUTE_BKT_HASH_ITERATION(1);
-	IXGBE_COMPUTE_BKT_HASH_ITERATION(2);
-	IXGBE_COMPUTE_BKT_HASH_ITERATION(3);
-	IXGBE_COMPUTE_BKT_HASH_ITERATION(4);
-	IXGBE_COMPUTE_BKT_HASH_ITERATION(5);
-	IXGBE_COMPUTE_BKT_HASH_ITERATION(6);
-	IXGBE_COMPUTE_BKT_HASH_ITERATION(7);
-	IXGBE_COMPUTE_BKT_HASH_ITERATION(8);
-	IXGBE_COMPUTE_BKT_HASH_ITERATION(9);
-	IXGBE_COMPUTE_BKT_HASH_ITERATION(10);
-	IXGBE_COMPUTE_BKT_HASH_ITERATION(11);
-	IXGBE_COMPUTE_BKT_HASH_ITERATION(12);
-	IXGBE_COMPUTE_BKT_HASH_ITERATION(13);
-	IXGBE_COMPUTE_BKT_HASH_ITERATION(14);
-	IXGBE_COMPUTE_BKT_HASH_ITERATION(15);
+	for (i = 1; i <= 15; i++)
+		IXGBE_COMPUTE_BKT_HASH_ITERATION(i);
 
 	/*
 	 * Limit hash to 13 bits since max bucket count is 8K.
-- 
cgit v1.2.2


From 7155d051077c94d972cc77ac68e45f3ec890763e Mon Sep 17 00:00:00 2001
From: Don Skidmore <donald.c.skidmore@intel.com>
Date: Thu, 27 Feb 2014 09:03:30 +0000
Subject: ixgbe: Stop cacheing if the MNG FW enabled

We use to cache whether the MNG FW was enabled, how since this isn't
static we really need to verify with each check.  This patch makes that
change.

CC: Arun Sharma <asharma@fb.com>
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c  | 1 -
 drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c  | 7 +++----
 drivers/net/ethernet/intel/ixgbe/ixgbe_common.h | 1 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c   | 6 +-----
 drivers/net/ethernet/intel/ixgbe/ixgbe_type.h   | 2 --
 drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c   | 1 -
 6 files changed, 5 insertions(+), 13 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
index 7fe22542e404..4c78ea8946c1 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
@@ -1315,7 +1315,6 @@ static struct ixgbe_mac_operations mac_ops_82598 = {
 	.release_swfw_sync      = &ixgbe_release_swfw_sync,
 	.get_thermal_sensor_data = NULL,
 	.init_thermal_sensor_thresh = NULL,
-	.mng_fw_enabled		= NULL,
 	.prot_autoc_read	= &prot_autoc_read_generic,
 	.prot_autoc_write	= &prot_autoc_write_generic,
 };
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
index 34ab2fca2ee3..f32b3dd1ba8e 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
@@ -67,7 +67,7 @@ static s32 ixgbe_write_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset,
 static s32 ixgbe_reset_pipeline_82599(struct ixgbe_hw *hw);
 static bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw);
 
-static bool ixgbe_mng_enabled(struct ixgbe_hw *hw)
+bool ixgbe_mng_enabled(struct ixgbe_hw *hw)
 {
 	u32 fwsm, manc, factps;
 
@@ -94,7 +94,7 @@ static void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw)
 	 * and MNG not enabled
 	 */
 	if ((mac->ops.get_media_type(hw) == ixgbe_media_type_fiber) &&
-	    !hw->mng_fw_enabled) {
+	    !ixgbe_mng_enabled(hw)) {
 		mac->ops.disable_tx_laser =
 		                       &ixgbe_disable_tx_laser_multispeed_fiber;
 		mac->ops.enable_tx_laser =
@@ -1206,7 +1206,7 @@ mac_reset_top:
 		 * Likewise if we support WoL we don't want change the
 		 * LMS state either.
 		 */
-		if ((hw->phy.multispeed_fiber && hw->mng_fw_enabled) ||
+		if ((hw->phy.multispeed_fiber && ixgbe_mng_enabled(hw)) ||
 		    hw->wol_enabled)
 			hw->mac.orig_autoc =
 				(hw->mac.orig_autoc & ~IXGBE_AUTOC_LMS_MASK) |
@@ -2500,7 +2500,6 @@ static struct ixgbe_mac_operations mac_ops_82599 = {
 	.release_swfw_sync      = &ixgbe_release_swfw_sync,
 	.get_thermal_sensor_data = &ixgbe_get_thermal_sensor_data_generic,
 	.init_thermal_sensor_thresh = &ixgbe_init_thermal_sensor_thresh_generic,
-	.mng_fw_enabled		= &ixgbe_mng_enabled,
 	.prot_autoc_read	= &prot_autoc_read_82599,
 	.prot_autoc_write	= &prot_autoc_write_82599,
 };
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
index afa1cda90c2e..f12c40fb5537 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
@@ -111,6 +111,7 @@ s32 ixgbe_get_device_caps_generic(struct ixgbe_hw *hw, u16 *device_caps);
 s32 ixgbe_set_fw_drv_ver_generic(struct ixgbe_hw *hw, u8 maj, u8 min,
 				 u8 build, u8 ver);
 void ixgbe_clear_tx_pending(struct ixgbe_hw *hw);
+bool ixgbe_mng_enabled(struct ixgbe_hw *hw);
 
 void ixgbe_set_rxpba_generic(struct ixgbe_hw *hw, int num_pb,
 			     u32 headroom, int strategy);
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 02271f6d9a17..354771f169b6 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -8038,10 +8038,6 @@ static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (err)
 		goto err_sw_init;
 
-	/* Cache if MNG FW is up so we don't have to read the REG later */
-	if (hw->mac.ops.mng_fw_enabled)
-		hw->mng_fw_enabled = hw->mac.ops.mng_fw_enabled(hw);
-
 	/* Make it possible the adapter to be woken up via WOL */
 	switch (adapter->hw.mac.type) {
 	case ixgbe_mac_82599EB:
@@ -8292,7 +8288,7 @@ skip_sriov:
 	ixgbe_dbg_adapter_init(adapter);
 
 	/* Need link setup for MNG FW, else wait for IXGBE_UP */
-	if (hw->mng_fw_enabled && hw->mac.ops.setup_link)
+	if (ixgbe_mng_enabled(hw) && hw->mac.ops.setup_link)
 		hw->mac.ops.setup_link(hw,
 			IXGBE_LINK_SPEED_10GB_FULL | IXGBE_LINK_SPEED_1GB_FULL,
 			true);
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
index b5408eb8670b..8a6ff2423f07 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
@@ -2921,7 +2921,6 @@ struct ixgbe_mac_operations {
 	s32 (*set_fw_drv_ver)(struct ixgbe_hw *, u8, u8, u8, u8);
 	s32 (*get_thermal_sensor_data)(struct ixgbe_hw *);
 	s32 (*init_thermal_sensor_thresh)(struct ixgbe_hw *hw);
-	bool (*mng_fw_enabled)(struct ixgbe_hw *hw);
 };
 
 struct ixgbe_phy_operations {
@@ -3052,7 +3051,6 @@ struct ixgbe_hw {
 	bool				adapter_stopped;
 	bool				force_full_reset;
 	bool				allow_unsupported_sfp;
-	bool				mng_fw_enabled;
 	bool				wol_enabled;
 };
 
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
index 2e0e5ec5d61f..188a5974b85c 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
@@ -855,7 +855,6 @@ static struct ixgbe_mac_operations mac_ops_X540 = {
 	.enable_rx_buff		= &ixgbe_enable_rx_buff_generic,
 	.get_thermal_sensor_data = NULL,
 	.init_thermal_sensor_thresh = NULL,
-	.mng_fw_enabled		= NULL,
 	.prot_autoc_read	= &prot_autoc_read_generic,
 	.prot_autoc_write	= &prot_autoc_write_generic,
 };
-- 
cgit v1.2.2


From cdc04dcce0598fead6029a2f95e95a4d2ea419c2 Mon Sep 17 00:00:00 2001
From: Emil Tantilov <emil.s.tantilov@intel.com>
Date: Thu, 20 Mar 2014 03:47:53 +0000
Subject: ixgbe: enable tx queues after link up

This patch moves the call to enable Tx queues after the link is established.
Previously there was a chance for aggressive start_ndo_xmit() callers to
sneak packets between enabling the Tx queues and the link coming up.

In addition it replaces netif_tx_start_all_queues() with
netif_tx_wake_all_queues() to allow for flushing of the qdisc.

CC: Arun Sharma <asharma@fb.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 32 ++++++++++++++-------------
 1 file changed, 17 insertions(+), 15 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 354771f169b6..9e5a36612432 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -4655,8 +4655,6 @@ static void ixgbe_setup_gpie(struct ixgbe_adapter *adapter)
 static void ixgbe_up_complete(struct ixgbe_adapter *adapter)
 {
 	struct ixgbe_hw *hw = &adapter->hw;
-	struct net_device *upper;
-	struct list_head *iter;
 	int err;
 	u32 ctrl_ext;
 
@@ -4698,19 +4696,6 @@ static void ixgbe_up_complete(struct ixgbe_adapter *adapter)
 			e_crit(drv, "Fan has stopped, replace the adapter\n");
 	}
 
-	/* enable transmits */
-	netif_tx_start_all_queues(adapter->netdev);
-
-	/* enable any upper devices */
-	netdev_for_each_all_upper_dev_rcu(adapter->netdev, upper, iter) {
-		if (netif_is_macvlan(upper)) {
-			struct macvlan_dev *vlan = netdev_priv(upper);
-
-			if (vlan->fwd_priv)
-				netif_tx_start_all_queues(upper);
-		}
-	}
-
 	/* bring the link up in the watchdog, this could race with our first
 	 * link up interrupt but shouldn't be a problem */
 	adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE;
@@ -6082,6 +6067,8 @@ static void ixgbe_watchdog_link_is_up(struct ixgbe_adapter *adapter)
 {
 	struct net_device *netdev = adapter->netdev;
 	struct ixgbe_hw *hw = &adapter->hw;
+	struct net_device *upper;
+	struct list_head *iter;
 	u32 link_speed = adapter->link_speed;
 	bool flow_rx, flow_tx;
 
@@ -6133,6 +6120,21 @@ static void ixgbe_watchdog_link_is_up(struct ixgbe_adapter *adapter)
 	netif_carrier_on(netdev);
 	ixgbe_check_vf_rate_limit(adapter);
 
+	/* enable transmits */
+	netif_tx_wake_all_queues(adapter->netdev);
+
+	/* enable any upper devices */
+	rtnl_lock();
+	netdev_for_each_all_upper_dev_rcu(adapter->netdev, upper, iter) {
+		if (netif_is_macvlan(upper)) {
+			struct macvlan_dev *vlan = netdev_priv(upper);
+
+			if (vlan->fwd_priv)
+				netif_tx_wake_all_queues(upper);
+		}
+	}
+	rtnl_unlock();
+
 	/* update the default user priority for VFs */
 	ixgbe_update_default_up(adapter);
 
-- 
cgit v1.2.2


From d23536796011cbeeb93fc866446800c52deb5603 Mon Sep 17 00:00:00 2001
From: Daniel Kim <dekim@broadcom.com>
Date: Thu, 20 Mar 2014 10:18:00 +0100
Subject: brcmfmac: Enable 40MHz bandwidth in 2GHz band and OBSS scanning
 operations

This patch enables 40MHz bandwidth in 2GHz band after checking whether
cfg80211 allows it or not, and enables OBSS scanning operations to
to support 20/40 BSS coexistence.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Daniel Kim <dekim@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 .../net/wireless/brcm80211/brcmfmac/fwil_types.h   | 10 +++++++++
 .../net/wireless/brcm80211/brcmfmac/wl_cfg80211.c  | 26 ++++++++++++++++++++++
 2 files changed, 36 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h b/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h
index af17a5bc8b83..614e4888504f 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h
@@ -48,6 +48,11 @@
 
 #define BRCMF_MAXRATES_IN_SET		16	/* max # of rates in rateset */
 
+/* OBSS Coex Auto/On/Off */
+#define BRCMF_OBSS_COEX_AUTO		(-1)
+#define BRCMF_OBSS_COEX_OFF		0
+#define BRCMF_OBSS_COEX_ON		1
+
 enum brcmf_fil_p2p_if_types {
 	BRCMF_FIL_P2P_IF_CLIENT,
 	BRCMF_FIL_P2P_IF_GO,
@@ -87,6 +92,11 @@ struct brcmf_fil_bss_enable_le {
 	__le32 enable;
 };
 
+struct brcmf_fil_bwcap_le {
+	__le32 band;
+	__le32 bw_cap;
+};
+
 /**
  * struct tdls_iovar - common structure for tdls iovars.
  *
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
index 9f75afb3baa0..428b4cb94da1 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
@@ -191,6 +191,7 @@ static struct ieee80211_supported_band __wl_band_2ghz = {
 	.n_channels = ARRAY_SIZE(__wl_2ghz_channels),
 	.bitrates = wl_g_rates,
 	.n_bitrates = wl_g_rates_size,
+	.ht_cap = {IEEE80211_HT_CAP_SUP_WIDTH_20_40, true},
 };
 
 static struct ieee80211_supported_band __wl_band_5ghz_a = {
@@ -4929,6 +4930,19 @@ static void init_vif_event(struct brcmf_cfg80211_vif_event *event)
 	mutex_init(&event->vif_event_lock);
 }
 
+static int brcmf_set_bwcap(struct brcmf_if *ifp, u32 band, u32 bw_cap)
+{
+	struct brcmf_fil_bwcap_le band_bwcap;
+	int err;
+
+	band_bwcap.band = cpu_to_le32(band);
+	band_bwcap.bw_cap = cpu_to_le32(bw_cap);
+	err = brcmf_fil_iovar_data_set(ifp, "bw_cap", &band_bwcap,
+				       sizeof(band_bwcap));
+
+	return err;
+}
+
 struct brcmf_cfg80211_info *brcmf_cfg80211_attach(struct brcmf_pub *drvr,
 						  struct device *busdev)
 {
@@ -4986,6 +5000,18 @@ struct brcmf_cfg80211_info *brcmf_cfg80211_attach(struct brcmf_pub *drvr,
 		goto cfg80211_p2p_attach_out;
 	}
 
+	/* If cfg80211 didn't disable 40MHz HT CAP in wiphy_register(),
+	 * setup 40MHz in 2GHz band and enable OBSS scanning.
+	 */
+	if (wiphy->bands[IEEE80211_BAND_2GHZ]->ht_cap.cap &
+	    IEEE80211_HT_CAP_SUP_WIDTH_20_40) {
+		err = brcmf_set_bwcap(ifp, WLC_BAND_2G, WLC_BW_CAP_40MHZ);
+		if (!err) {
+			err = brcmf_fil_iovar_int_set(ifp, "obss_coex",
+						      BRCMF_OBSS_COEX_AUTO);
+		}
+	}
+
 	err = brcmf_fil_iovar_int_set(ifp, "tdls_enable", 1);
 	if (err) {
 		brcmf_dbg(INFO, "TDLS not enabled (%d)\n", err);
-- 
cgit v1.2.2


From 58e9df462fd70a1862378beb46b312f1f6bca94f Mon Sep 17 00:00:00 2001
From: Arend van Spriel <arend@broadcom.com>
Date: Thu, 20 Mar 2014 10:18:01 +0100
Subject: brcmfmac: reinit watchdog completion after handling watchdog

The watchdog thread waits on completion that is set from a timer. As
the completion is count based this could mean that on a busy system
the watchdog is handled multiple times with a very short interval.
This is not the intended behaviour. After handling the watchdog it
should wait for the next timer expiry. This is accomplished by
reinitializing the completion.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index 859eddd526ef..47a6f3957b7f 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -3994,6 +3994,7 @@ brcmf_sdio_watchdog_thread(void *data)
 			brcmf_sdio_bus_watchdog(bus);
 			/* Count the tick for reference */
 			bus->sdcnt.tickcnt++;
+			reinit_completion(&bus->watchdog_wait);
 		} else
 			break;
 	}
-- 
cgit v1.2.2


From 4d1a4f16c96d3f4cf6afd92ca3ffb4d2c24875e1 Mon Sep 17 00:00:00 2001
From: Arend van Spriel <arend@broadcom.com>
Date: Thu, 20 Mar 2014 10:18:02 +0100
Subject: brcmfmac: only show error message when brcmf_sdiod_regrw_helper()
 fails

In the function brcmf_sdiod_request_data() an error message is logged,
but the calling function retries it. This patch will only log an error
message when retry limit is reached. The low-level error is still
logged by a SDIO debug message.

Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c | 41 ++++++++++++------------
 1 file changed, 21 insertions(+), 20 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
index 6e8718bf6920..a16e644e7c08 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
@@ -269,26 +269,17 @@ static int brcmf_sdiod_request_data(struct brcmf_sdio_dev *sdiodev, u8 fn,
 		break;
 	}
 
-	if (ret) {
-		/*
-		 * SleepCSR register access can fail when
-		 * waking up the device so reduce this noise
-		 * in the logs.
-		 */
-		if (addr != SBSDIO_FUNC1_SLEEPCSR)
-			brcmf_err("failed to %s data F%d@0x%05x, err: %d\n",
-				  write ? "write" : "read", fn, addr, ret);
-		else
-			brcmf_dbg(SDIO, "failed to %s data F%d@0x%05x, err: %d\n",
-				  write ? "write" : "read", fn, addr, ret);
-	}
+	if (ret)
+		brcmf_dbg(SDIO, "failed to %s data F%d@0x%05x, err: %d\n",
+			  write ? "write" : "read", fn, addr, ret);
+
 	return ret;
 }
 
 static int brcmf_sdiod_regrw_helper(struct brcmf_sdio_dev *sdiodev, u32 addr,
 				   u8 regsz, void *data, bool write)
 {
-	u8 func_num;
+	u8 func;
 	s32 retry = 0;
 	int ret;
 
@@ -302,9 +293,9 @@ static int brcmf_sdiod_regrw_helper(struct brcmf_sdio_dev *sdiodev, u32 addr,
 	 * The rest: function 1 silicon backplane core registers
 	 */
 	if ((addr & ~REG_F0_REG_MASK) == 0)
-		func_num = SDIO_FUNC_0;
+		func = SDIO_FUNC_0;
 	else
-		func_num = SDIO_FUNC_1;
+		func = SDIO_FUNC_1;
 
 	do {
 		if (!write)
@@ -312,16 +303,26 @@ static int brcmf_sdiod_regrw_helper(struct brcmf_sdio_dev *sdiodev, u32 addr,
 		/* for retry wait for 1 ms till bus get settled down */
 		if (retry)
 			usleep_range(1000, 2000);
-		ret = brcmf_sdiod_request_data(sdiodev, func_num, addr, regsz,
+		ret = brcmf_sdiod_request_data(sdiodev, func, addr, regsz,
 					       data, write);
 	} while (ret != 0 && ret != -ENOMEDIUM &&
 		 retry++ < SDIOH_API_ACCESS_RETRY_LIMIT);
 
 	if (ret == -ENOMEDIUM)
 		brcmf_bus_change_state(sdiodev->bus_if, BRCMF_BUS_NOMEDIUM);
-	else if (ret != 0)
-		brcmf_err("failed with %d\n", ret);
-
+	else if (ret != 0) {
+		/*
+		 * SleepCSR register access can fail when
+		 * waking up the device so reduce this noise
+		 * in the logs.
+		 */
+		if (addr != SBSDIO_FUNC1_SLEEPCSR)
+			brcmf_err("failed to %s data F%d@0x%05x, err: %d\n",
+				  write ? "write" : "read", func, addr, ret);
+		else
+			brcmf_dbg(SDIO, "failed to %s data F%d@0x%05x, err: %d\n",
+				  write ? "write" : "read", func, addr, ret);
+	}
 	return ret;
 }
 
-- 
cgit v1.2.2


From 67b3bd4e65f0854aca70e0134d59b1daede49504 Mon Sep 17 00:00:00 2001
From: Arend van Spriel <arend@broadcom.com>
Date: Thu, 20 Mar 2014 10:18:03 +0100
Subject: brcmfmac: fallback to mimo_bw_cap for older firmwares

In order to support the driver behaviour introduced by:

   commit d0575a5a703978c43e25128421158c78534ba100
   Author: Daniel Kim <dekim@broadcom.com>
   Date:   Wed Mar 12 18:12:14 2014 -0700

       brcmfmac: Enable 40MHz bandwidth in 2GHz band and OBSS scanning

in devices that do not support bwcap firmware command a fallback
is added.

Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 .../net/wireless/brcm80211/brcmfmac/wl_cfg80211.c  | 26 +++++++++++++++-------
 1 file changed, 18 insertions(+), 8 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
index 428b4cb94da1..e0e649aab8db 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
@@ -4930,16 +4930,27 @@ static void init_vif_event(struct brcmf_cfg80211_vif_event *event)
 	mutex_init(&event->vif_event_lock);
 }
 
-static int brcmf_set_bwcap(struct brcmf_if *ifp, u32 band, u32 bw_cap)
+static int brcmf_enable_bw40_2g(struct brcmf_if *ifp)
 {
 	struct brcmf_fil_bwcap_le band_bwcap;
+	u32 val;
 	int err;
 
-	band_bwcap.band = cpu_to_le32(band);
-	band_bwcap.bw_cap = cpu_to_le32(bw_cap);
-	err = brcmf_fil_iovar_data_set(ifp, "bw_cap", &band_bwcap,
-				       sizeof(band_bwcap));
+	/* verify support for bw_cap command */
+	val = WLC_BAND_5G;
+	err = brcmf_fil_iovar_int_get(ifp, "bw_cap", &val);
 
+	if (!err) {
+		/* only set 2G bandwidth using bw_cap command */
+		band_bwcap.band = cpu_to_le32(WLC_BAND_2G);
+		band_bwcap.bw_cap = cpu_to_le32(WLC_BW_40MHZ_BIT);
+		err = brcmf_fil_iovar_data_set(ifp, "bw_cap", &band_bwcap,
+					       sizeof(band_bwcap));
+	} else {
+		brcmf_dbg(INFO, "fallback to mimo_bw_cap\n");
+		val = WLC_N_BW_40ALL;
+		err = brcmf_fil_iovar_int_set(ifp, "mimo_bw_cap", val);
+	}
 	return err;
 }
 
@@ -5005,11 +5016,10 @@ struct brcmf_cfg80211_info *brcmf_cfg80211_attach(struct brcmf_pub *drvr,
 	 */
 	if (wiphy->bands[IEEE80211_BAND_2GHZ]->ht_cap.cap &
 	    IEEE80211_HT_CAP_SUP_WIDTH_20_40) {
-		err = brcmf_set_bwcap(ifp, WLC_BAND_2G, WLC_BW_CAP_40MHZ);
-		if (!err) {
+		err = brcmf_enable_bw40_2g(ifp);
+		if (!err)
 			err = brcmf_fil_iovar_int_set(ifp, "obss_coex",
 						      BRCMF_OBSS_COEX_AUTO);
-		}
 	}
 
 	err = brcmf_fil_iovar_int_set(ifp, "tdls_enable", 1);
-- 
cgit v1.2.2


From 8798998c2cdbc0df3c64e8845c1502ed93ef1ebd Mon Sep 17 00:00:00 2001
From: Fabio Estevam <fabio.estevam@freescale.com>
Date: Wed, 19 Mar 2014 11:22:06 -0300
Subject: smsc911x: Change clock warning message to debug level

Since passing the clock is not mandatory, change the warning message to debug,
so that we avoid getting the following clock failure message on every boot:

smsc911x: Driver version 2008-10-21
smsc911x smsc911x (unregistered net_device): couldn't get clock -2
libphy: smsc911x-mdio: probed

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/smsc/smsc911x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c
index 6382b7c416f4..95e2b9a20d40 100644
--- a/drivers/net/ethernet/smsc/smsc911x.c
+++ b/drivers/net/ethernet/smsc/smsc911x.c
@@ -439,7 +439,7 @@ static int smsc911x_request_resources(struct platform_device *pdev)
 	/* Request clock */
 	pdata->clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(pdata->clk))
-		netdev_warn(ndev, "couldn't get clock %li\n", PTR_ERR(pdata->clk));
+		netdev_dbg(ndev, "couldn't get clock %li\n", PTR_ERR(pdata->clk));
 
 	return ret;
 }
-- 
cgit v1.2.2


From 1ab95d37bcc3ff2d69e3871e4f056bab7aed0b85 Mon Sep 17 00:00:00 2001
From: Matan Barak <matanb@mellanox.com>
Date: Wed, 19 Mar 2014 18:11:50 +0200
Subject: net/mlx4: Add data structures to support N-Ports per VF

Adds the required data structures to support VFs with N (1 or 2)
ports instead of always using the number of physical ports.

Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/mellanox/mlx4/main.c | 109 +++++++++++++++++++++++-------
 1 file changed, 85 insertions(+), 24 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c
index abd0b1d277aa..e1a55857af71 100644
--- a/drivers/net/ethernet/mellanox/mlx4/main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/main.c
@@ -2193,6 +2193,10 @@ static int __mlx4_init_one(struct pci_dev *pdev, int pci_dev_data)
 	struct mlx4_dev *dev;
 	int err;
 	int port;
+	int nvfs[MLX4_MAX_PORTS + 1], prb_vf[MLX4_MAX_PORTS + 1];
+	unsigned total_vfs = 0;
+	int sriov_initialized = 0;
+	unsigned int i;
 
 	pr_info(DRV_NAME ": Initializing %s\n", pci_name(pdev));
 
@@ -2207,17 +2211,39 @@ static int __mlx4_init_one(struct pci_dev *pdev, int pci_dev_data)
 	 * per port, we must limit the number of VFs to 63 (since their are
 	 * 128 MACs)
 	 */
-	if (num_vfs >= MLX4_MAX_NUM_VF) {
+	for (i = 0; i < sizeof(nvfs)/sizeof(nvfs[0]);
+	     total_vfs += nvfs[i], i++) {
+		nvfs[i] = i == MLX4_MAX_PORTS ? num_vfs : 0;
+		if (nvfs[i] < 0) {
+			dev_err(&pdev->dev, "num_vfs module parameter cannot be negative\n");
+			return -EINVAL;
+		}
+	}
+	for (i = 0; i < sizeof(prb_vf)/sizeof(prb_vf[0]); i++) {
+		prb_vf[i] = i == MLX4_MAX_PORTS ? probe_vf : 0;
+		if (prb_vf[i] < 0 || prb_vf[i] > nvfs[i]) {
+			dev_err(&pdev->dev, "probe_vf module parameter cannot be negative or greater than num_vfs\n");
+			return -EINVAL;
+		}
+	}
+	if (total_vfs >= MLX4_MAX_NUM_VF) {
 		dev_err(&pdev->dev,
 			"Requested more VF's (%d) than allowed (%d)\n",
-			num_vfs, MLX4_MAX_NUM_VF - 1);
+			total_vfs, MLX4_MAX_NUM_VF - 1);
 		return -EINVAL;
 	}
 
-	if (num_vfs < 0) {
-		pr_err("num_vfs module parameter cannot be negative\n");
-		return -EINVAL;
+	for (i = 0; i < MLX4_MAX_PORTS; i++) {
+		if (nvfs[i] + nvfs[2] >= MLX4_MAX_NUM_VF_P_PORT) {
+			dev_err(&pdev->dev,
+				"Requested more VF's (%d) for port (%d) than allowed (%d)\n",
+				nvfs[i] + nvfs[2], i + 1,
+				MLX4_MAX_NUM_VF_P_PORT - 1);
+			return -EINVAL;
+		}
 	}
+
+
 	/*
 	 * Check for BARs.
 	 */
@@ -2292,11 +2318,23 @@ static int __mlx4_init_one(struct pci_dev *pdev, int pci_dev_data)
 	if (pci_dev_data & MLX4_PCI_DEV_IS_VF) {
 		/* When acting as pf, we normally skip vfs unless explicitly
 		 * requested to probe them. */
-		if (num_vfs && extended_func_num(pdev) > probe_vf) {
-			mlx4_warn(dev, "Skipping virtual function:%d\n",
-						extended_func_num(pdev));
-			err = -ENODEV;
-			goto err_free_dev;
+		if (total_vfs) {
+			unsigned vfs_offset = 0;
+			for (i = 0; i < sizeof(nvfs)/sizeof(nvfs[0]) &&
+			     vfs_offset + nvfs[i] < extended_func_num(pdev);
+			     vfs_offset += nvfs[i], i++)
+				;
+			if (i == sizeof(nvfs)/sizeof(nvfs[0])) {
+				err = -ENODEV;
+				goto err_free_dev;
+			}
+			if ((extended_func_num(pdev) - vfs_offset)
+			    > prb_vf[i]) {
+				mlx4_warn(dev, "Skipping virtual function:%d\n",
+					  extended_func_num(pdev));
+				err = -ENODEV;
+				goto err_free_dev;
+			}
 		}
 		mlx4_warn(dev, "Detected virtual function - running in slave mode\n");
 		dev->flags |= MLX4_FLAG_SLAVE;
@@ -2316,22 +2354,30 @@ static int __mlx4_init_one(struct pci_dev *pdev, int pci_dev_data)
 			}
 		}
 
-		if (num_vfs) {
-			mlx4_warn(dev, "Enabling SR-IOV with %d VFs\n", num_vfs);
-
-			atomic_inc(&pf_loading);
-			err = pci_enable_sriov(pdev, num_vfs);
-			atomic_dec(&pf_loading);
-
-			if (err) {
-				mlx4_err(dev, "Failed to enable SR-IOV, continuing without SR-IOV (err = %d).\n",
-					 err);
+		if (total_vfs) {
+			mlx4_warn(dev, "Enabling SR-IOV with %d VFs\n",
+				  total_vfs);
+			dev->dev_vfs = kzalloc(
+					total_vfs * sizeof(*dev->dev_vfs),
+					GFP_KERNEL);
+			if (NULL == dev->dev_vfs) {
+				mlx4_err(dev, "Failed to allocate memory for VFs\n");
 				err = 0;
 			} else {
-				mlx4_warn(dev, "Running in master mode\n");
-				dev->flags |= MLX4_FLAG_SRIOV |
-					      MLX4_FLAG_MASTER;
-				dev->num_vfs = num_vfs;
+				atomic_inc(&pf_loading);
+				err = pci_enable_sriov(pdev, total_vfs);
+				atomic_dec(&pf_loading);
+				if (err) {
+					mlx4_err(dev, "Failed to enable SR-IOV, continuing without SR-IOV (err = %d).\n",
+						 err);
+					err = 0;
+				} else {
+					mlx4_warn(dev, "Running in master mode\n");
+					dev->flags |= MLX4_FLAG_SRIOV |
+						      MLX4_FLAG_MASTER;
+					dev->num_vfs = total_vfs;
+					sriov_initialized = 1;
+				}
 			}
 		}
 
@@ -2396,12 +2442,24 @@ slave_start:
 	/* In master functions, the communication channel must be initialized
 	 * after obtaining its address from fw */
 	if (mlx4_is_master(dev)) {
+		unsigned sum = 0;
 		err = mlx4_multi_func_init(dev);
 		if (err) {
 			mlx4_err(dev, "Failed to init master mfunc"
 				 "interface, aborting.\n");
 			goto err_close;
 		}
+		if (sriov_initialized) {
+			for (i = 0; i < sizeof(nvfs)/sizeof(nvfs[0]); i++) {
+				unsigned j;
+				for (j = 0; j < nvfs[i]; ++sum, ++j) {
+					dev->dev_vfs[sum].min_port =
+						i < 2 ? i + 1 : 1;
+					dev->dev_vfs[sum].n_ports = i < 2 ? 1 :
+						dev->caps.num_ports;
+				}
+			}
+		}
 	}
 
 	err = mlx4_alloc_eq_table(dev);
@@ -2509,6 +2567,8 @@ err_rel_own:
 	if (!mlx4_is_slave(dev))
 		mlx4_free_ownership(dev);
 
+	kfree(priv->dev.dev_vfs);
+
 err_free_dev:
 	kfree(priv);
 
@@ -2595,6 +2655,7 @@ static void mlx4_remove_one(struct pci_dev *pdev)
 		kfree(dev->caps.qp0_proxy);
 		kfree(dev->caps.qp1_tunnel);
 		kfree(dev->caps.qp1_proxy);
+		kfree(dev->dev_vfs);
 
 		kfree(priv);
 		pci_release_regions(pdev);
-- 
cgit v1.2.2


From f74462acf8f390528c8b7937f227c6c90d017f3b Mon Sep 17 00:00:00 2001
From: Matan Barak <matanb@mellanox.com>
Date: Wed, 19 Mar 2014 18:11:51 +0200
Subject: net/mlx4: Add utils for N-Port VFs

This patch adds the following utils:
1. Convert slave_id -> VF
2. Get the active ports by slave_id
3. Convert slave's port to real port
4. Get the slave's port from real port
5. Get all slaves that uses the i'th real port
6. Get all slaves that uses the i'th real port exclusively

Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/mellanox/mlx4/cmd.c  | 106 ++++++++++++++++++++++++++++++
 drivers/net/ethernet/mellanox/mlx4/mlx4.h |   2 +
 2 files changed, 108 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/mellanox/mlx4/cmd.c b/drivers/net/ethernet/mellanox/mlx4/cmd.c
index 2b0b45ece14b..59a1b2703281 100644
--- a/drivers/net/ethernet/mellanox/mlx4/cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx4/cmd.c
@@ -2234,6 +2234,112 @@ static int mlx4_get_slave_indx(struct mlx4_dev *dev, int vf)
 	return vf+1;
 }
 
+int mlx4_get_vf_indx(struct mlx4_dev *dev, int slave)
+{
+	if (slave < 1 || slave > dev->num_vfs) {
+		mlx4_err(dev,
+			 "Bad slave number:%d (number of activated slaves: %lu)\n",
+			 slave, dev->num_slaves);
+		return -EINVAL;
+	}
+	return slave - 1;
+}
+
+struct mlx4_active_ports mlx4_get_active_ports(struct mlx4_dev *dev, int slave)
+{
+	struct mlx4_active_ports actv_ports;
+	int vf;
+
+	bitmap_zero(actv_ports.ports, MLX4_MAX_PORTS);
+
+	if (slave == 0) {
+		bitmap_fill(actv_ports.ports, dev->caps.num_ports);
+		return actv_ports;
+	}
+
+	vf = mlx4_get_vf_indx(dev, slave);
+	if (vf < 0)
+		return actv_ports;
+
+	bitmap_set(actv_ports.ports, dev->dev_vfs[vf].min_port - 1,
+		   min((int)dev->dev_vfs[mlx4_get_vf_indx(dev, slave)].n_ports,
+		   dev->caps.num_ports));
+
+	return actv_ports;
+}
+EXPORT_SYMBOL_GPL(mlx4_get_active_ports);
+
+int mlx4_slave_convert_port(struct mlx4_dev *dev, int slave, int port)
+{
+	unsigned n;
+	struct mlx4_active_ports actv_ports = mlx4_get_active_ports(dev, slave);
+	unsigned m = bitmap_weight(actv_ports.ports, dev->caps.num_ports);
+
+	if (port <= 0 || port > m)
+		return -EINVAL;
+
+	n = find_first_bit(actv_ports.ports, dev->caps.num_ports);
+	if (port <= n)
+		port = n + 1;
+
+	return port;
+}
+EXPORT_SYMBOL_GPL(mlx4_slave_convert_port);
+
+int mlx4_phys_to_slave_port(struct mlx4_dev *dev, int slave, int port)
+{
+	struct mlx4_active_ports actv_ports = mlx4_get_active_ports(dev, slave);
+	if (test_bit(port - 1, actv_ports.ports))
+		return port -
+			find_first_bit(actv_ports.ports, dev->caps.num_ports);
+
+	return -1;
+}
+EXPORT_SYMBOL_GPL(mlx4_phys_to_slave_port);
+
+struct mlx4_slaves_pport mlx4_phys_to_slaves_pport(struct mlx4_dev *dev,
+						   int port)
+{
+	unsigned i;
+	struct mlx4_slaves_pport slaves_pport;
+
+	bitmap_zero(slaves_pport.slaves, MLX4_MFUNC_MAX);
+
+	if (port <= 0 || port > dev->caps.num_ports)
+		return slaves_pport;
+
+	for (i = 0; i < dev->num_vfs + 1; i++) {
+		struct mlx4_active_ports actv_ports =
+			mlx4_get_active_ports(dev, i);
+		if (test_bit(port - 1, actv_ports.ports))
+			set_bit(i, slaves_pport.slaves);
+	}
+
+	return slaves_pport;
+}
+EXPORT_SYMBOL_GPL(mlx4_phys_to_slaves_pport);
+
+struct mlx4_slaves_pport mlx4_phys_to_slaves_pport_actv(
+		struct mlx4_dev *dev,
+		const struct mlx4_active_ports *crit_ports)
+{
+	unsigned i;
+	struct mlx4_slaves_pport slaves_pport;
+
+	bitmap_zero(slaves_pport.slaves, MLX4_MFUNC_MAX);
+
+	for (i = 0; i < dev->num_vfs + 1; i++) {
+		struct mlx4_active_ports actv_ports =
+			mlx4_get_active_ports(dev, i);
+		if (bitmap_equal(crit_ports->ports, actv_ports.ports,
+				 dev->caps.num_ports))
+			set_bit(i, slaves_pport.slaves);
+	}
+
+	return slaves_pport;
+}
+EXPORT_SYMBOL_GPL(mlx4_phys_to_slaves_pport_actv);
+
 int mlx4_set_vf_mac(struct mlx4_dev *dev, int port, int vf, u64 mac)
 {
 	struct mlx4_priv *priv = mlx4_priv(dev);
diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4.h b/drivers/net/ethernet/mellanox/mlx4/mlx4.h
index 6ba38c98c492..fe8715e35afa 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4.h
@@ -1289,5 +1289,7 @@ void mlx4_init_quotas(struct mlx4_dev *dev);
 
 int mlx4_get_slave_num_gids(struct mlx4_dev *dev, int slave);
 int mlx4_get_base_gid_ix(struct mlx4_dev *dev, int slave);
+/* Returns the VF index of slave */
+int mlx4_get_vf_indx(struct mlx4_dev *dev, int slave);
 
 #endif /* MLX4_H */
-- 
cgit v1.2.2


From 449fc48866f7d84b0d9a19201de18a4dd4d3488c Mon Sep 17 00:00:00 2001
From: Matan Barak <matanb@mellanox.com>
Date: Wed, 19 Mar 2014 18:11:52 +0200
Subject: net/mlx4: Adapt code for N-Port VF

Adds support for N-Port VFs, this includes:
1. Adding support in the wrapped FW command
	In wrapped commands, we need to verify and convert
	the slave's port into the real physical port.
	Furthermore, when sending the response back to the slave,
	a reverse conversion should be made.
2. Adjusting sqpn for QP1 para-virtualization
	The slave assumes that sqpn is used for QP1 communication.
	If the slave is assigned to a port != (first port), we need
	to adjust the sqpn that will direct its QP1 packets into the
	correct endpoint.
3. Adjusting gid[5] to modify the port for raw ethernet
	In B0 steering, gid[5] contains the port. It needs
	to be adjusted into the physical port.
4. Adjusting number of ports in the query / ports caps in the FW commands
	When a slave queries the hardware, it needs to view only
	the physical ports it's assigned to.
5. Adjusting the sched_qp according to the port number
	The QP port is encoded in the sched_qp, thus in modify_qp we need
	to encode the correct port in sched_qp.

Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/mellanox/mlx4/cmd.c           |  23 ++-
 drivers/net/ethernet/mellanox/mlx4/eq.c            |  48 +++++--
 drivers/net/ethernet/mellanox/mlx4/fw.c            |  62 +++++++-
 drivers/net/ethernet/mellanox/mlx4/main.c          |   4 +-
 drivers/net/ethernet/mellanox/mlx4/mcg.c           |   5 +-
 drivers/net/ethernet/mellanox/mlx4/mlx4.h          |   3 +-
 drivers/net/ethernet/mellanox/mlx4/port.c          | 158 ++++++++++++++++++---
 .../net/ethernet/mellanox/mlx4/resource_tracker.c  | 143 ++++++++++++++++---
 8 files changed, 385 insertions(+), 61 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/mellanox/mlx4/cmd.c b/drivers/net/ethernet/mellanox/mlx4/cmd.c
index 59a1b2703281..516c1dd4963b 100644
--- a/drivers/net/ethernet/mellanox/mlx4/cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx4/cmd.c
@@ -1643,8 +1643,16 @@ static int mlx4_master_activate_admin_state(struct mlx4_priv *priv, int slave)
 	int port, err;
 	struct mlx4_vport_state *vp_admin;
 	struct mlx4_vport_oper_state *vp_oper;
-
-	for (port = 1; port <= MLX4_MAX_PORTS; port++) {
+	struct mlx4_active_ports actv_ports = mlx4_get_active_ports(
+			&priv->dev, slave);
+	int min_port = find_first_bit(actv_ports.ports,
+				      priv->dev.caps.num_ports) + 1;
+	int max_port = min_port - 1 +
+		bitmap_weight(actv_ports.ports, priv->dev.caps.num_ports);
+
+	for (port = min_port; port <= max_port; port++) {
+		if (!test_bit(port - 1, actv_ports.ports))
+			continue;
 		vp_oper = &priv->mfunc.master.vf_oper[slave].vport[port];
 		vp_admin = &priv->mfunc.master.vf_admin[slave].vport[port];
 		vp_oper->state = *vp_admin;
@@ -1685,8 +1693,17 @@ static void mlx4_master_deactivate_admin_state(struct mlx4_priv *priv, int slave
 {
 	int port;
 	struct mlx4_vport_oper_state *vp_oper;
+	struct mlx4_active_ports actv_ports = mlx4_get_active_ports(
+			&priv->dev, slave);
+	int min_port = find_first_bit(actv_ports.ports,
+				      priv->dev.caps.num_ports) + 1;
+	int max_port = min_port - 1 +
+		bitmap_weight(actv_ports.ports, priv->dev.caps.num_ports);
+
 
-	for (port = 1; port <= MLX4_MAX_PORTS; port++) {
+	for (port = min_port; port <= max_port; port++) {
+		if (!test_bit(port - 1, actv_ports.ports))
+			continue;
 		vp_oper = &priv->mfunc.master.vf_oper[slave].vport[port];
 		if (NO_INDX != vp_oper->vlan_idx) {
 			__mlx4_unregister_vlan(&priv->dev,
diff --git a/drivers/net/ethernet/mellanox/mlx4/eq.c b/drivers/net/ethernet/mellanox/mlx4/eq.c
index 8992b38578d5..d501a2b0fb79 100644
--- a/drivers/net/ethernet/mellanox/mlx4/eq.c
+++ b/drivers/net/ethernet/mellanox/mlx4/eq.c
@@ -271,7 +271,10 @@ enum slave_port_state mlx4_get_slave_port_state(struct mlx4_dev *dev, int slave,
 {
 	struct mlx4_priv *priv = mlx4_priv(dev);
 	struct mlx4_slave_state *s_state = priv->mfunc.master.slave_state;
-	if (slave >= dev->num_slaves || port > MLX4_MAX_PORTS) {
+	struct mlx4_active_ports actv_ports = mlx4_get_active_ports(dev, slave);
+
+	if (slave >= dev->num_slaves || port > dev->caps.num_ports ||
+	    port <= 0 || !test_bit(port - 1, actv_ports.ports)) {
 		pr_err("%s: Error: asking for slave:%d, port:%d\n",
 		       __func__, slave, port);
 		return SLAVE_PORT_DOWN;
@@ -285,8 +288,10 @@ static int mlx4_set_slave_port_state(struct mlx4_dev *dev, int slave, u8 port,
 {
 	struct mlx4_priv *priv = mlx4_priv(dev);
 	struct mlx4_slave_state *s_state = priv->mfunc.master.slave_state;
+	struct mlx4_active_ports actv_ports = mlx4_get_active_ports(dev, slave);
 
-	if (slave >= dev->num_slaves || port > MLX4_MAX_PORTS || port == 0) {
+	if (slave >= dev->num_slaves || port > dev->caps.num_ports ||
+	    port <= 0 || !test_bit(port - 1, actv_ports.ports)) {
 		pr_err("%s: Error: asking for slave:%d, port:%d\n",
 		       __func__, slave, port);
 		return -1;
@@ -300,9 +305,13 @@ static void set_all_slave_state(struct mlx4_dev *dev, u8 port, int event)
 {
 	int i;
 	enum slave_port_gen_event gen_event;
+	struct mlx4_slaves_pport slaves_pport = mlx4_phys_to_slaves_pport(dev,
+									  port);
 
-	for (i = 0; i < dev->num_slaves; i++)
-		set_and_calc_slave_port_state(dev, i, port, event, &gen_event);
+	for (i = 0; i < dev->num_vfs + 1; i++)
+		if (test_bit(i, slaves_pport.slaves))
+			set_and_calc_slave_port_state(dev, i, port,
+						      event, &gen_event);
 }
 /**************************************************************************
 	The function get as input the new event to that port,
@@ -321,12 +330,14 @@ int set_and_calc_slave_port_state(struct mlx4_dev *dev, int slave,
 	struct mlx4_slave_state *ctx = NULL;
 	unsigned long flags;
 	int ret = -1;
+	struct mlx4_active_ports actv_ports = mlx4_get_active_ports(dev, slave);
 	enum slave_port_state cur_state =
 		mlx4_get_slave_port_state(dev, slave, port);
 
 	*gen_event = SLAVE_PORT_GEN_EVENT_NONE;
 
-	if (slave >= dev->num_slaves || port > MLX4_MAX_PORTS || port == 0) {
+	if (slave >= dev->num_slaves || port > dev->caps.num_ports ||
+	    port <= 0 || !test_bit(port - 1, actv_ports.ports)) {
 		pr_err("%s: Error: asking for slave:%d, port:%d\n",
 		       __func__, slave, port);
 		return ret;
@@ -542,15 +553,19 @@ static int mlx4_eq_int(struct mlx4_dev *dev, struct mlx4_eq *eq)
 				       be64_to_cpu(eqe->event.cmd.out_param));
 			break;
 
-		case MLX4_EVENT_TYPE_PORT_CHANGE:
+		case MLX4_EVENT_TYPE_PORT_CHANGE: {
+			struct mlx4_slaves_pport slaves_port;
 			port = be32_to_cpu(eqe->event.port_change.port) >> 28;
+			slaves_port = mlx4_phys_to_slaves_pport(dev, port);
 			if (eqe->subtype == MLX4_PORT_CHANGE_SUBTYPE_DOWN) {
 				mlx4_dispatch_event(dev, MLX4_DEV_EVENT_PORT_DOWN,
 						    port);
 				mlx4_priv(dev)->sense.do_sense_port[port] = 1;
 				if (!mlx4_is_master(dev))
 					break;
-				for (i = 0; i < dev->num_slaves; i++) {
+				for (i = 0; i < dev->num_vfs + 1; i++) {
+					if (!test_bit(i, slaves_port.slaves))
+						continue;
 					if (dev->caps.port_type[port] == MLX4_PORT_TYPE_ETH) {
 						if (i == mlx4_master_func_num(dev))
 							continue;
@@ -558,8 +573,13 @@ static int mlx4_eq_int(struct mlx4_dev *dev, struct mlx4_eq *eq)
 							 " to slave: %d, port:%d\n",
 							 __func__, i, port);
 						s_info = &priv->mfunc.master.vf_oper[slave].vport[port].state;
-						if (IFLA_VF_LINK_STATE_AUTO == s_info->link_state)
+						if (IFLA_VF_LINK_STATE_AUTO == s_info->link_state) {
+							eqe->event.port_change.port =
+								cpu_to_be32(
+								(be32_to_cpu(eqe->event.port_change.port) & 0xFFFFFFF)
+								| (mlx4_phys_to_slave_port(dev, i, port) << 28));
 							mlx4_slave_event(dev, i, eqe);
+						}
 					} else {  /* IB port */
 						set_and_calc_slave_port_state(dev, i, port,
 									      MLX4_PORT_STATE_DEV_EVENT_PORT_DOWN,
@@ -580,12 +600,19 @@ static int mlx4_eq_int(struct mlx4_dev *dev, struct mlx4_eq *eq)
 				if (!mlx4_is_master(dev))
 					break;
 				if (dev->caps.port_type[port] == MLX4_PORT_TYPE_ETH)
-					for (i = 0; i < dev->num_slaves; i++) {
+					for (i = 0; i < dev->num_vfs + 1; i++) {
+						if (!test_bit(i, slaves_port.slaves))
+							continue;
 						if (i == mlx4_master_func_num(dev))
 							continue;
 						s_info = &priv->mfunc.master.vf_oper[slave].vport[port].state;
-						if (IFLA_VF_LINK_STATE_AUTO == s_info->link_state)
+						if (IFLA_VF_LINK_STATE_AUTO == s_info->link_state) {
+							eqe->event.port_change.port =
+								cpu_to_be32(
+								(be32_to_cpu(eqe->event.port_change.port) & 0xFFFFFFF)
+								| (mlx4_phys_to_slave_port(dev, i, port) << 28));
 							mlx4_slave_event(dev, i, eqe);
+						}
 					}
 				else /* IB port */
 					/* port-up event will be sent to a slave when the
@@ -594,6 +621,7 @@ static int mlx4_eq_int(struct mlx4_dev *dev, struct mlx4_eq *eq)
 					set_all_slave_state(dev, port, MLX4_DEV_EVENT_PORT_UP);
 			}
 			break;
+		}
 
 		case MLX4_EVENT_TYPE_CQ_ERROR:
 			mlx4_warn(dev, "CQ %s on CQN %06x\n",
diff --git a/drivers/net/ethernet/mellanox/mlx4/fw.c b/drivers/net/ethernet/mellanox/mlx4/fw.c
index d0d8dd832557..6bd33e2fc17c 100644
--- a/drivers/net/ethernet/mellanox/mlx4/fw.c
+++ b/drivers/net/ethernet/mellanox/mlx4/fw.c
@@ -225,13 +225,25 @@ int mlx4_QUERY_FUNC_CAP_wrapper(struct mlx4_dev *dev, int slave,
 #define QUERY_FUNC_CAP_FLAGS0_FORCE_PHY_WQE_GID 0x80
 
 	if (vhcr->op_modifier == 1) {
+		struct mlx4_active_ports actv_ports =
+			mlx4_get_active_ports(dev, slave);
+		int converted_port = mlx4_slave_convert_port(
+				dev, slave, vhcr->in_modifier);
+
+		if (converted_port < 0)
+			return -EINVAL;
+
+		vhcr->in_modifier = converted_port;
 		/* Set nic_info bit to mark new fields support */
 		field  = QUERY_FUNC_CAP_FLAGS1_NIC_INFO;
 		MLX4_PUT(outbox->buf, field, QUERY_FUNC_CAP_FLAGS1_OFFSET);
 
-		field = vhcr->in_modifier; /* phys-port = logical-port */
+		/* phys-port = logical-port */
+		field = vhcr->in_modifier -
+			find_first_bit(actv_ports.ports, dev->caps.num_ports);
 		MLX4_PUT(outbox->buf, field, QUERY_FUNC_CAP_PHYS_PORT_OFFSET);
 
+		field = vhcr->in_modifier;
 		/* size is now the QP number */
 		size = dev->phys_caps.base_tunnel_sqpn + 8 * slave + field - 1;
 		MLX4_PUT(outbox->buf, size, QUERY_FUNC_CAP_QP0_TUNNEL);
@@ -249,12 +261,16 @@ int mlx4_QUERY_FUNC_CAP_wrapper(struct mlx4_dev *dev, int slave,
 			 QUERY_FUNC_CAP_PHYS_PORT_ID);
 
 	} else if (vhcr->op_modifier == 0) {
+		struct mlx4_active_ports actv_ports =
+			mlx4_get_active_ports(dev, slave);
 		/* enable rdma and ethernet interfaces, and new quota locations */
 		field = (QUERY_FUNC_CAP_FLAG_ETH | QUERY_FUNC_CAP_FLAG_RDMA |
 			 QUERY_FUNC_CAP_FLAG_QUOTAS);
 		MLX4_PUT(outbox->buf, field, QUERY_FUNC_CAP_FLAGS_OFFSET);
 
-		field = dev->caps.num_ports;
+		field = min(
+			bitmap_weight(actv_ports.ports, dev->caps.num_ports),
+			dev->caps.num_ports);
 		MLX4_PUT(outbox->buf, field, QUERY_FUNC_CAP_NUM_PORTS_OFFSET);
 
 		size = dev->caps.function_caps; /* set PF behaviours */
@@ -840,6 +856,10 @@ int mlx4_QUERY_DEV_CAP_wrapper(struct mlx4_dev *dev, int slave,
 	int	err = 0;
 	u8	field;
 	u32	bmme_flags;
+	int	real_port;
+	int	slave_port;
+	int	first_port;
+	struct mlx4_active_ports actv_ports;
 
 	err = mlx4_cmd_box(dev, 0, outbox->dma, 0, 0, MLX4_CMD_QUERY_DEV_CAP,
 			   MLX4_CMD_TIME_CLASS_A, MLX4_CMD_NATIVE);
@@ -852,8 +872,26 @@ int mlx4_QUERY_DEV_CAP_wrapper(struct mlx4_dev *dev, int slave,
 	MLX4_GET(flags, outbox->buf, QUERY_DEV_CAP_EXT_FLAGS_OFFSET);
 	flags |= MLX4_DEV_CAP_FLAG_PORT_MNG_CHG_EV;
 	flags &= ~MLX4_DEV_CAP_FLAG_MEM_WINDOW;
+	actv_ports = mlx4_get_active_ports(dev, slave);
+	first_port = find_first_bit(actv_ports.ports, dev->caps.num_ports);
+	for (slave_port = 0, real_port = first_port;
+	     real_port < first_port +
+	     bitmap_weight(actv_ports.ports, dev->caps.num_ports);
+	     ++real_port, ++slave_port) {
+		if (flags & (MLX4_DEV_CAP_FLAG_WOL_PORT1 << real_port))
+			flags |= MLX4_DEV_CAP_FLAG_WOL_PORT1 << slave_port;
+		else
+			flags &= ~(MLX4_DEV_CAP_FLAG_WOL_PORT1 << slave_port);
+	}
+	for (; slave_port < dev->caps.num_ports; ++slave_port)
+		flags &= ~(MLX4_DEV_CAP_FLAG_WOL_PORT1 << slave_port);
 	MLX4_PUT(outbox->buf, flags, QUERY_DEV_CAP_EXT_FLAGS_OFFSET);
 
+	MLX4_GET(field, outbox->buf, QUERY_DEV_CAP_VL_PORT_OFFSET);
+	field &= ~0x0F;
+	field |= bitmap_weight(actv_ports.ports, dev->caps.num_ports) & 0x0F;
+	MLX4_PUT(outbox->buf, field, QUERY_DEV_CAP_VL_PORT_OFFSET);
+
 	/* For guests, disable timestamp */
 	MLX4_GET(field, outbox->buf, QUERY_DEV_CAP_CQ_TS_SUPPORT_OFFSET);
 	field &= 0x7f;
@@ -903,12 +941,20 @@ int mlx4_QUERY_PORT_wrapper(struct mlx4_dev *dev, int slave,
 	u16 short_field;
 	int err;
 	int admin_link_state;
+	int port = mlx4_slave_convert_port(dev, slave,
+					   vhcr->in_modifier & 0xFF);
 
 #define MLX4_VF_PORT_NO_LINK_SENSE_MASK	0xE0
 #define MLX4_PORT_LINK_UP_MASK		0x80
 #define QUERY_PORT_CUR_MAX_PKEY_OFFSET	0x0c
 #define QUERY_PORT_CUR_MAX_GID_OFFSET	0x0e
 
+	if (port < 0)
+		return -EINVAL;
+
+	vhcr->in_modifier = (vhcr->in_modifier & ~0xFF) |
+			    (port & 0xFF);
+
 	err = mlx4_cmd_box(dev, 0, outbox->dma, vhcr->in_modifier, 0,
 			   MLX4_CMD_QUERY_PORT, MLX4_CMD_TIME_CLASS_B,
 			   MLX4_CMD_NATIVE);
@@ -936,7 +982,7 @@ int mlx4_QUERY_PORT_wrapper(struct mlx4_dev *dev, int slave,
 			 QUERY_PORT_SUPPORTED_TYPE_OFFSET);
 
 		if (dev->caps.port_type[vhcr->in_modifier] == MLX4_PORT_TYPE_ETH)
-			short_field = mlx4_get_slave_num_gids(dev, slave);
+			short_field = mlx4_get_slave_num_gids(dev, slave, port);
 		else
 			short_field = 1; /* slave max gids */
 		MLX4_PUT(outbox->buf, short_field,
@@ -1588,9 +1634,12 @@ int mlx4_INIT_PORT_wrapper(struct mlx4_dev *dev, int slave,
 			   struct mlx4_cmd_info *cmd)
 {
 	struct mlx4_priv *priv = mlx4_priv(dev);
-	int port = vhcr->in_modifier;
+	int port = mlx4_slave_convert_port(dev, slave, vhcr->in_modifier);
 	int err;
 
+	if (port < 0)
+		return -EINVAL;
+
 	if (priv->mfunc.master.slave_state[slave].init_port_mask & (1 << port))
 		return 0;
 
@@ -1680,9 +1729,12 @@ int mlx4_CLOSE_PORT_wrapper(struct mlx4_dev *dev, int slave,
 			    struct mlx4_cmd_info *cmd)
 {
 	struct mlx4_priv *priv = mlx4_priv(dev);
-	int port = vhcr->in_modifier;
+	int port = mlx4_slave_convert_port(dev, slave, vhcr->in_modifier);
 	int err;
 
+	if (port < 0)
+		return -EINVAL;
+
 	if (!(priv->mfunc.master.slave_state[slave].init_port_mask &
 	    (1 << port)))
 		return 0;
diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c
index e1a55857af71..472925428de7 100644
--- a/drivers/net/ethernet/mellanox/mlx4/main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/main.c
@@ -1471,7 +1471,7 @@ static void mlx4_parav_master_pf_caps(struct mlx4_dev *dev)
 	for (i = 1; i <= dev->caps.num_ports; i++) {
 		if (dev->caps.port_type[i] == MLX4_PORT_TYPE_ETH)
 			dev->caps.gid_table_len[i] =
-				mlx4_get_slave_num_gids(dev, 0);
+				mlx4_get_slave_num_gids(dev, 0, i);
 		else
 			dev->caps.gid_table_len[i] = 1;
 		dev->caps.pkey_table_len[i] =
@@ -1498,7 +1498,7 @@ static void choose_steering_mode(struct mlx4_dev *dev,
 	if (mlx4_log_num_mgm_entry_size == -1 &&
 	    dev_cap->flags2 & MLX4_DEV_CAP_FLAG2_FS_EN &&
 	    (!mlx4_is_mfunc(dev) ||
-	     (dev_cap->fs_max_num_qp_per_entry >= (num_vfs + 1))) &&
+	     (dev_cap->fs_max_num_qp_per_entry >= (dev->num_vfs + 1))) &&
 	    choose_log_fs_mgm_entry_size(dev_cap->fs_max_num_qp_per_entry) >=
 		MLX4_MIN_MGM_LOG_ENTRY_SIZE) {
 		dev->oper_log_mgm_entry_size =
diff --git a/drivers/net/ethernet/mellanox/mlx4/mcg.c b/drivers/net/ethernet/mellanox/mlx4/mcg.c
index db7dc0b6667d..80ccb4edf825 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mcg.c
+++ b/drivers/net/ethernet/mellanox/mlx4/mcg.c
@@ -1387,9 +1387,12 @@ int mlx4_PROMISC_wrapper(struct mlx4_dev *dev, int slave,
 			 struct mlx4_cmd_info *cmd)
 {
 	u32 qpn = (u32) vhcr->in_param & 0xffffffff;
-	u8 port = vhcr->in_param >> 62;
+	int port = mlx4_slave_convert_port(dev, slave, vhcr->in_param >> 62);
 	enum mlx4_steer_type steer = vhcr->in_modifier;
 
+	if (port < 0)
+		return -EINVAL;
+
 	/* Promiscuous unicast is not allowed in mfunc */
 	if (mlx4_is_mfunc(dev) && steer == MLX4_UC_STEER)
 		return 0;
diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4.h b/drivers/net/ethernet/mellanox/mlx4/mlx4.h
index fe8715e35afa..9fca6c150de3 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4.h
@@ -1287,8 +1287,7 @@ void mlx4_vf_immed_vlan_work_handler(struct work_struct *_work);
 
 void mlx4_init_quotas(struct mlx4_dev *dev);
 
-int mlx4_get_slave_num_gids(struct mlx4_dev *dev, int slave);
-int mlx4_get_base_gid_ix(struct mlx4_dev *dev, int slave);
+int mlx4_get_slave_num_gids(struct mlx4_dev *dev, int slave, int port);
 /* Returns the VF index of slave */
 int mlx4_get_vf_indx(struct mlx4_dev *dev, int slave);
 
diff --git a/drivers/net/ethernet/mellanox/mlx4/port.c b/drivers/net/ethernet/mellanox/mlx4/port.c
index ece328166e94..2705b9ab9463 100644
--- a/drivers/net/ethernet/mellanox/mlx4/port.c
+++ b/drivers/net/ethernet/mellanox/mlx4/port.c
@@ -507,30 +507,82 @@ int mlx4_get_port_ib_caps(struct mlx4_dev *dev, u8 port, __be32 *caps)
 }
 static struct mlx4_roce_gid_entry zgid_entry;
 
-int mlx4_get_slave_num_gids(struct mlx4_dev *dev, int slave)
+int mlx4_get_slave_num_gids(struct mlx4_dev *dev, int slave, int port)
 {
+	int vfs;
+	int slave_gid = slave;
+	unsigned i;
+	struct mlx4_slaves_pport slaves_pport;
+	struct mlx4_active_ports actv_ports;
+	unsigned max_port_p_one;
+
 	if (slave == 0)
 		return MLX4_ROCE_PF_GIDS;
-	if (slave <= ((MLX4_ROCE_MAX_GIDS - MLX4_ROCE_PF_GIDS) % dev->num_vfs))
-		return ((MLX4_ROCE_MAX_GIDS - MLX4_ROCE_PF_GIDS) / dev->num_vfs) + 1;
-	return (MLX4_ROCE_MAX_GIDS - MLX4_ROCE_PF_GIDS) / dev->num_vfs;
+
+	/* Slave is a VF */
+	slaves_pport = mlx4_phys_to_slaves_pport(dev, port);
+	actv_ports = mlx4_get_active_ports(dev, slave);
+	max_port_p_one = find_first_bit(actv_ports.ports, dev->caps.num_ports) +
+		bitmap_weight(actv_ports.ports, dev->caps.num_ports) + 1;
+
+	for (i = 1; i < max_port_p_one; i++) {
+		struct mlx4_active_ports exclusive_ports;
+		struct mlx4_slaves_pport slaves_pport_actv;
+		bitmap_zero(exclusive_ports.ports, dev->caps.num_ports);
+		set_bit(i - 1, exclusive_ports.ports);
+		if (i == port)
+			continue;
+		slaves_pport_actv = mlx4_phys_to_slaves_pport_actv(
+				    dev, &exclusive_ports);
+		slave_gid -= bitmap_weight(slaves_pport_actv.slaves,
+					   dev->num_vfs + 1);
+	}
+	vfs = bitmap_weight(slaves_pport.slaves, dev->num_vfs + 1) - 1;
+	if (slave_gid <= ((MLX4_ROCE_MAX_GIDS - MLX4_ROCE_PF_GIDS) % vfs))
+		return ((MLX4_ROCE_MAX_GIDS - MLX4_ROCE_PF_GIDS) / vfs) + 1;
+	return (MLX4_ROCE_MAX_GIDS - MLX4_ROCE_PF_GIDS) / vfs;
 }
 
-int mlx4_get_base_gid_ix(struct mlx4_dev *dev, int slave)
+int mlx4_get_base_gid_ix(struct mlx4_dev *dev, int slave, int port)
 {
 	int gids;
+	unsigned i;
+	int slave_gid = slave;
 	int vfs;
 
-	gids = MLX4_ROCE_MAX_GIDS - MLX4_ROCE_PF_GIDS;
-	vfs = dev->num_vfs;
+	struct mlx4_slaves_pport slaves_pport;
+	struct mlx4_active_ports actv_ports;
+	unsigned max_port_p_one;
 
 	if (slave == 0)
 		return 0;
-	if (slave <= gids % vfs)
-		return MLX4_ROCE_PF_GIDS + ((gids / vfs) + 1) * (slave - 1);
 
-	return MLX4_ROCE_PF_GIDS + (gids % vfs) + ((gids / vfs) * (slave - 1));
+	slaves_pport = mlx4_phys_to_slaves_pport(dev, port);
+	actv_ports = mlx4_get_active_ports(dev, slave);
+	max_port_p_one = find_first_bit(actv_ports.ports, dev->caps.num_ports) +
+		bitmap_weight(actv_ports.ports, dev->caps.num_ports) + 1;
+
+	for (i = 1; i < max_port_p_one; i++) {
+		struct mlx4_active_ports exclusive_ports;
+		struct mlx4_slaves_pport slaves_pport_actv;
+		bitmap_zero(exclusive_ports.ports, dev->caps.num_ports);
+		set_bit(i - 1, exclusive_ports.ports);
+		if (i == port)
+			continue;
+		slaves_pport_actv = mlx4_phys_to_slaves_pport_actv(
+				    dev, &exclusive_ports);
+		slave_gid -= bitmap_weight(slaves_pport_actv.slaves,
+					   dev->num_vfs + 1);
+	}
+	gids = MLX4_ROCE_MAX_GIDS - MLX4_ROCE_PF_GIDS;
+	vfs = bitmap_weight(slaves_pport.slaves, dev->num_vfs + 1) - 1;
+	if (slave_gid <= gids % vfs)
+		return MLX4_ROCE_PF_GIDS + ((gids / vfs) + 1) * (slave_gid - 1);
+
+	return MLX4_ROCE_PF_GIDS + (gids % vfs) +
+		((gids / vfs) * (slave_gid - 1));
 }
+EXPORT_SYMBOL_GPL(mlx4_get_base_gid_ix);
 
 static int mlx4_common_set_port(struct mlx4_dev *dev, int slave, u32 in_mod,
 				u8 op_mod, struct mlx4_cmd_mailbox *inbox)
@@ -617,8 +669,8 @@ static int mlx4_common_set_port(struct mlx4_dev *dev, int slave, u32 in_mod,
 			 * need a FOR-loop here over number of gids the guest has.
 			 * 1. Check no duplicates in gids passed by slave
 			 */
-			num_gids = mlx4_get_slave_num_gids(dev, slave);
-			base = mlx4_get_base_gid_ix(dev, slave);
+			num_gids = mlx4_get_slave_num_gids(dev, slave, port);
+			base = mlx4_get_base_gid_ix(dev, slave, port);
 			gid_entry_mbox = (struct mlx4_roce_gid_entry *)(inbox->buf);
 			for (i = 0; i < num_gids; gid_entry_mbox++, i++) {
 				if (!memcmp(gid_entry_mbox->raw, zgid_entry.raw,
@@ -738,6 +790,15 @@ int mlx4_SET_PORT_wrapper(struct mlx4_dev *dev, int slave,
 			  struct mlx4_cmd_mailbox *outbox,
 			  struct mlx4_cmd_info *cmd)
 {
+	int port = mlx4_slave_convert_port(
+			dev, slave, vhcr->in_modifier & 0xFF);
+
+	if (port < 0)
+		return -EINVAL;
+
+	vhcr->in_modifier = (vhcr->in_modifier & ~0xFF) |
+			    (port & 0xFF);
+
 	return mlx4_common_set_port(dev, slave, vhcr->in_modifier,
 				    vhcr->op_modifier, inbox);
 }
@@ -1026,10 +1087,16 @@ int mlx4_get_slave_from_roce_gid(struct mlx4_dev *dev, int port, u8 *gid,
 	struct mlx4_priv *priv = mlx4_priv(dev);
 	int i, found_ix = -1;
 	int vf_gids = MLX4_ROCE_MAX_GIDS - MLX4_ROCE_PF_GIDS;
+	struct mlx4_slaves_pport slaves_pport;
+	unsigned num_vfs;
+	int slave_gid;
 
 	if (!mlx4_is_mfunc(dev))
 		return -EINVAL;
 
+	slaves_pport = mlx4_phys_to_slaves_pport(dev, port);
+	num_vfs = bitmap_weight(slaves_pport.slaves, dev->num_vfs + 1) - 1;
+
 	for (i = 0; i < MLX4_ROCE_MAX_GIDS; i++) {
 		if (!memcmp(priv->roce_gids[port - 1][i].raw, gid, 16)) {
 			found_ix = i;
@@ -1039,16 +1106,67 @@ int mlx4_get_slave_from_roce_gid(struct mlx4_dev *dev, int port, u8 *gid,
 
 	if (found_ix >= 0) {
 		if (found_ix < MLX4_ROCE_PF_GIDS)
-			*slave_id = 0;
-		else if (found_ix < MLX4_ROCE_PF_GIDS + (vf_gids % dev->num_vfs) *
-			 (vf_gids / dev->num_vfs + 1))
-			*slave_id = ((found_ix - MLX4_ROCE_PF_GIDS) /
-				     (vf_gids / dev->num_vfs + 1)) + 1;
+			slave_gid = 0;
+		else if (found_ix < MLX4_ROCE_PF_GIDS + (vf_gids % num_vfs) *
+			 (vf_gids / num_vfs + 1))
+			slave_gid = ((found_ix - MLX4_ROCE_PF_GIDS) /
+				     (vf_gids / num_vfs + 1)) + 1;
 		else
-			*slave_id =
+			slave_gid =
 			((found_ix - MLX4_ROCE_PF_GIDS -
-			  ((vf_gids % dev->num_vfs) * ((vf_gids / dev->num_vfs + 1)))) /
-			 (vf_gids / dev->num_vfs)) + vf_gids % dev->num_vfs + 1;
+			  ((vf_gids % num_vfs) * ((vf_gids / num_vfs + 1)))) /
+			 (vf_gids / num_vfs)) + vf_gids % num_vfs + 1;
+
+		if (slave_gid) {
+			struct mlx4_active_ports exclusive_ports;
+			struct mlx4_active_ports actv_ports;
+			struct mlx4_slaves_pport slaves_pport_actv;
+			unsigned max_port_p_one;
+			int num_slaves_before = 1;
+
+			for (i = 1; i < port; i++) {
+				bitmap_zero(exclusive_ports.ports, dev->caps.num_ports);
+				set_bit(i, exclusive_ports.ports);
+				slaves_pport_actv =
+					mlx4_phys_to_slaves_pport_actv(
+							dev, &exclusive_ports);
+				num_slaves_before += bitmap_weight(
+						slaves_pport_actv.slaves,
+						dev->num_vfs + 1);
+			}
+
+			if (slave_gid < num_slaves_before) {
+				bitmap_zero(exclusive_ports.ports, dev->caps.num_ports);
+				set_bit(port - 1, exclusive_ports.ports);
+				slaves_pport_actv =
+					mlx4_phys_to_slaves_pport_actv(
+							dev, &exclusive_ports);
+				slave_gid += bitmap_weight(
+						slaves_pport_actv.slaves,
+						dev->num_vfs + 1) -
+						num_slaves_before;
+			}
+			actv_ports = mlx4_get_active_ports(dev, slave_gid);
+			max_port_p_one = find_first_bit(
+				actv_ports.ports, dev->caps.num_ports) +
+				bitmap_weight(actv_ports.ports,
+					      dev->caps.num_ports) + 1;
+
+			for (i = 1; i < max_port_p_one; i++) {
+				if (i == port)
+					continue;
+				bitmap_zero(exclusive_ports.ports,
+					    dev->caps.num_ports);
+				set_bit(i - 1, exclusive_ports.ports);
+				slaves_pport_actv =
+					mlx4_phys_to_slaves_pport_actv(
+						dev, &exclusive_ports);
+				slave_gid += bitmap_weight(
+						slaves_pport_actv.slaves,
+						dev->num_vfs + 1);
+			}
+		}
+		*slave_id = slave_gid;
 	}
 
 	return (found_ix >= 0) ? 0 : -EINVAL;
diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
index 74e490d70184..2a33513a0e31 100644
--- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
+++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
@@ -468,6 +468,8 @@ int mlx4_init_resource_tracker(struct mlx4_dev *dev)
 
 		spin_lock_init(&res_alloc->alloc_lock);
 		for (t = 0; t < dev->num_vfs + 1; t++) {
+			struct mlx4_active_ports actv_ports =
+				mlx4_get_active_ports(dev, t);
 			switch (i) {
 			case RES_QP:
 				initialize_res_quotas(dev, res_alloc, RES_QP,
@@ -497,10 +499,27 @@ int mlx4_init_resource_tracker(struct mlx4_dev *dev)
 				break;
 			case RES_MAC:
 				if (t == mlx4_master_func_num(dev)) {
-					res_alloc->quota[t] = MLX4_MAX_MAC_NUM;
+					int max_vfs_pport = 0;
+					/* Calculate the max vfs per port for */
+					/* both ports.			      */
+					for (j = 0; j < dev->caps.num_ports;
+					     j++) {
+						struct mlx4_slaves_pport slaves_pport =
+							mlx4_phys_to_slaves_pport(dev, j + 1);
+						unsigned current_slaves =
+							bitmap_weight(slaves_pport.slaves,
+								      dev->caps.num_ports) - 1;
+						if (max_vfs_pport < current_slaves)
+							max_vfs_pport =
+								current_slaves;
+					}
+					res_alloc->quota[t] =
+						MLX4_MAX_MAC_NUM -
+						2 * max_vfs_pport;
 					res_alloc->guaranteed[t] = 2;
 					for (j = 0; j < MLX4_MAX_PORTS; j++)
-						res_alloc->res_port_free[j] = MLX4_MAX_MAC_NUM;
+						res_alloc->res_port_free[j] =
+							MLX4_MAX_MAC_NUM;
 				} else {
 					res_alloc->quota[t] = MLX4_MAX_MAC_NUM;
 					res_alloc->guaranteed[t] = 2;
@@ -528,9 +547,10 @@ int mlx4_init_resource_tracker(struct mlx4_dev *dev)
 				break;
 			}
 			if (i == RES_MAC || i == RES_VLAN) {
-				for (j = 0; j < MLX4_MAX_PORTS; j++)
-					res_alloc->res_port_rsvd[j] +=
-						res_alloc->guaranteed[t];
+				for (j = 0; j < dev->caps.num_ports; j++)
+					if (test_bit(j, actv_ports.ports))
+						res_alloc->res_port_rsvd[j] +=
+							res_alloc->guaranteed[t];
 			} else {
 				res_alloc->res_reserved += res_alloc->guaranteed[t];
 			}
@@ -612,7 +632,8 @@ static void update_gid(struct mlx4_dev *dev, struct mlx4_cmd_mailbox *inbox,
 	if (MLX4_QP_ST_UD == ts) {
 		port = (qp_ctx->pri_path.sched_queue >> 6 & 1) + 1;
 		if (mlx4_is_eth(dev, port))
-			qp_ctx->pri_path.mgid_index = mlx4_get_base_gid_ix(dev, slave) | 0x80;
+			qp_ctx->pri_path.mgid_index =
+				mlx4_get_base_gid_ix(dev, slave, port) | 0x80;
 		else
 			qp_ctx->pri_path.mgid_index = slave | 0x80;
 
@@ -620,7 +641,8 @@ static void update_gid(struct mlx4_dev *dev, struct mlx4_cmd_mailbox *inbox,
 		if (optpar & MLX4_QP_OPTPAR_PRIMARY_ADDR_PATH) {
 			port = (qp_ctx->pri_path.sched_queue >> 6 & 1) + 1;
 			if (mlx4_is_eth(dev, port)) {
-				qp_ctx->pri_path.mgid_index += mlx4_get_base_gid_ix(dev, slave);
+				qp_ctx->pri_path.mgid_index +=
+					mlx4_get_base_gid_ix(dev, slave, port);
 				qp_ctx->pri_path.mgid_index &= 0x7f;
 			} else {
 				qp_ctx->pri_path.mgid_index = slave & 0x7F;
@@ -629,7 +651,8 @@ static void update_gid(struct mlx4_dev *dev, struct mlx4_cmd_mailbox *inbox,
 		if (optpar & MLX4_QP_OPTPAR_ALT_ADDR_PATH) {
 			port = (qp_ctx->alt_path.sched_queue >> 6 & 1) + 1;
 			if (mlx4_is_eth(dev, port)) {
-				qp_ctx->alt_path.mgid_index += mlx4_get_base_gid_ix(dev, slave);
+				qp_ctx->alt_path.mgid_index +=
+					mlx4_get_base_gid_ix(dev, slave, port);
 				qp_ctx->alt_path.mgid_index &= 0x7f;
 			} else {
 				qp_ctx->alt_path.mgid_index = slave & 0x7F;
@@ -1780,6 +1803,11 @@ static int mac_alloc_res(struct mlx4_dev *dev, int slave, int op, int cmd,
 		return err;
 
 	port = !in_port ? get_param_l(out_param) : in_port;
+	port = mlx4_slave_convert_port(
+			dev, slave, port);
+
+	if (port < 0)
+		return -EINVAL;
 	mac = in_param;
 
 	err = __mlx4_register_mac(dev, port, mac);
@@ -1887,6 +1915,11 @@ static int vlan_alloc_res(struct mlx4_dev *dev, int slave, int op, int cmd,
 	if (!port || op != RES_OP_RESERVE_AND_MAP)
 		return -EINVAL;
 
+	port = mlx4_slave_convert_port(
+			dev, slave, port);
+
+	if (port < 0)
+		return -EINVAL;
 	/* upstream kernels had NOP for reg/unreg vlan. Continue this. */
 	if (!in_port && port > 0 && port <= dev->caps.num_ports) {
 		slave_state[slave].old_vlan_api = true;
@@ -2184,6 +2217,11 @@ static int mac_free_res(struct mlx4_dev *dev, int slave, int op, int cmd,
 	switch (op) {
 	case RES_OP_RESERVE_AND_MAP:
 		port = !in_port ? get_param_l(out_param) : in_port;
+		port = mlx4_slave_convert_port(
+				dev, slave, port);
+
+		if (port < 0)
+			return -EINVAL;
 		mac_del_from_slave(dev, slave, in_param, port);
 		__mlx4_unregister_mac(dev, port, in_param);
 		break;
@@ -2203,6 +2241,11 @@ static int vlan_free_res(struct mlx4_dev *dev, int slave, int op, int cmd,
 	struct mlx4_slave_state *slave_state = priv->mfunc.master.slave_state;
 	int err = 0;
 
+	port = mlx4_slave_convert_port(
+			dev, slave, port);
+
+	if (port < 0)
+		return -EINVAL;
 	switch (op) {
 	case RES_OP_RESERVE_AND_MAP:
 		if (slave_state[slave].old_vlan_api)
@@ -2811,7 +2854,7 @@ static int verify_qp_parameters(struct mlx4_dev *dev,
 				if (optpar & MLX4_QP_OPTPAR_PRIMARY_ADDR_PATH) {
 					port = (qp_ctx->pri_path.sched_queue >> 6 & 1) + 1;
 					if (dev->caps.port_mask[port] != MLX4_PORT_TYPE_IB)
-						num_gids = mlx4_get_slave_num_gids(dev, slave);
+						num_gids = mlx4_get_slave_num_gids(dev, slave, port);
 					else
 						num_gids = 1;
 					if (qp_ctx->pri_path.mgid_index >= num_gids)
@@ -2820,7 +2863,7 @@ static int verify_qp_parameters(struct mlx4_dev *dev,
 				if (optpar & MLX4_QP_OPTPAR_ALT_ADDR_PATH) {
 					port = (qp_ctx->alt_path.sched_queue >> 6 & 1) + 1;
 					if (dev->caps.port_mask[port] != MLX4_PORT_TYPE_IB)
-						num_gids = mlx4_get_slave_num_gids(dev, slave);
+						num_gids = mlx4_get_slave_num_gids(dev, slave, port);
 					else
 						num_gids = 1;
 					if (qp_ctx->alt_path.mgid_index >= num_gids)
@@ -3338,6 +3381,39 @@ int mlx4_INIT2INIT_QP_wrapper(struct mlx4_dev *dev, int slave,
 	return mlx4_GEN_QP_wrapper(dev, slave, vhcr, inbox, outbox, cmd);
 }
 
+static int adjust_qp_sched_queue(struct mlx4_dev *dev, int slave,
+				  struct mlx4_qp_context *qpc,
+				  struct mlx4_cmd_mailbox *inbox)
+{
+	enum mlx4_qp_optpar optpar = be32_to_cpu(*(__be32 *)inbox->buf);
+	u8 pri_sched_queue;
+	int port = mlx4_slave_convert_port(
+		   dev, slave, (qpc->pri_path.sched_queue >> 6 & 1) + 1) - 1;
+
+	if (port < 0)
+		return -EINVAL;
+
+	pri_sched_queue = (qpc->pri_path.sched_queue & ~(1 << 6)) |
+			  ((port & 1) << 6);
+
+	if (optpar & MLX4_QP_OPTPAR_PRIMARY_ADDR_PATH ||
+	    mlx4_is_eth(dev, port + 1)) {
+		qpc->pri_path.sched_queue = pri_sched_queue;
+	}
+
+	if (optpar & MLX4_QP_OPTPAR_ALT_ADDR_PATH) {
+		port = mlx4_slave_convert_port(
+				dev, slave, (qpc->alt_path.sched_queue >> 6 & 1)
+				+ 1) - 1;
+		if (port < 0)
+			return -EINVAL;
+		qpc->alt_path.sched_queue =
+			(qpc->alt_path.sched_queue & ~(1 << 6)) |
+			(port & 1) << 6;
+	}
+	return 0;
+}
+
 static int roce_verify_mac(struct mlx4_dev *dev, int slave,
 				struct mlx4_qp_context *qpc,
 				struct mlx4_cmd_mailbox *inbox)
@@ -3375,6 +3451,9 @@ int mlx4_INIT2RTR_QP_wrapper(struct mlx4_dev *dev, int slave,
 	u8 orig_vlan_index = qpc->pri_path.vlan_index;
 	u8 orig_feup = qpc->pri_path.feup;
 
+	err = adjust_qp_sched_queue(dev, slave, qpc, inbox);
+	if (err)
+		return err;
 	err = verify_qp_parameters(dev, inbox, QP_TRANS_INIT2RTR, slave);
 	if (err)
 		return err;
@@ -3426,6 +3505,9 @@ int mlx4_RTR2RTS_QP_wrapper(struct mlx4_dev *dev, int slave,
 	int err;
 	struct mlx4_qp_context *context = inbox->buf + 8;
 
+	err = adjust_qp_sched_queue(dev, slave, context, inbox);
+	if (err)
+		return err;
 	err = verify_qp_parameters(dev, inbox, QP_TRANS_RTR2RTS, slave);
 	if (err)
 		return err;
@@ -3445,6 +3527,9 @@ int mlx4_RTS2RTS_QP_wrapper(struct mlx4_dev *dev, int slave,
 	int err;
 	struct mlx4_qp_context *context = inbox->buf + 8;
 
+	err = adjust_qp_sched_queue(dev, slave, context, inbox);
+	if (err)
+		return err;
 	err = verify_qp_parameters(dev, inbox, QP_TRANS_RTS2RTS, slave);
 	if (err)
 		return err;
@@ -3463,6 +3548,9 @@ int mlx4_SQERR2RTS_QP_wrapper(struct mlx4_dev *dev, int slave,
 			      struct mlx4_cmd_info *cmd)
 {
 	struct mlx4_qp_context *context = inbox->buf + 8;
+	int err = adjust_qp_sched_queue(dev, slave, context, inbox);
+	if (err)
+		return err;
 	adjust_proxy_tun_qkey(dev, vhcr, context);
 	return mlx4_GEN_QP_wrapper(dev, slave, vhcr, inbox, outbox, cmd);
 }
@@ -3476,6 +3564,9 @@ int mlx4_SQD2SQD_QP_wrapper(struct mlx4_dev *dev, int slave,
 	int err;
 	struct mlx4_qp_context *context = inbox->buf + 8;
 
+	err = adjust_qp_sched_queue(dev, slave, context, inbox);
+	if (err)
+		return err;
 	err = verify_qp_parameters(dev, inbox, QP_TRANS_SQD2SQD, slave);
 	if (err)
 		return err;
@@ -3495,6 +3586,9 @@ int mlx4_SQD2RTS_QP_wrapper(struct mlx4_dev *dev, int slave,
 	int err;
 	struct mlx4_qp_context *context = inbox->buf + 8;
 
+	err = adjust_qp_sched_queue(dev, slave, context, inbox);
+	if (err)
+		return err;
 	err = verify_qp_parameters(dev, inbox, QP_TRANS_SQD2RTS, slave);
 	if (err)
 		return err;
@@ -3598,16 +3692,26 @@ static int rem_mcg_res(struct mlx4_dev *dev, int slave, struct res_qp *rqp,
 	return err;
 }
 
-static int qp_attach(struct mlx4_dev *dev, struct mlx4_qp *qp, u8 gid[16],
-		     int block_loopback, enum mlx4_protocol prot,
+static int qp_attach(struct mlx4_dev *dev, int slave, struct mlx4_qp *qp,
+		     u8 gid[16], int block_loopback, enum mlx4_protocol prot,
 		     enum mlx4_steer_type type, u64 *reg_id)
 {
 	switch (dev->caps.steering_mode) {
-	case MLX4_STEERING_MODE_DEVICE_MANAGED:
-		return mlx4_trans_to_dmfs_attach(dev, qp, gid, gid[5],
+	case MLX4_STEERING_MODE_DEVICE_MANAGED: {
+		int port = mlx4_slave_convert_port(dev, slave, gid[5]);
+		if (port < 0)
+			return port;
+		return mlx4_trans_to_dmfs_attach(dev, qp, gid, port,
 						block_loopback, prot,
 						reg_id);
+	}
 	case MLX4_STEERING_MODE_B0:
+		if (prot == MLX4_PROT_ETH) {
+			int port = mlx4_slave_convert_port(dev, slave, gid[5]);
+			if (port < 0)
+				return port;
+			gid[5] = port;
+		}
 		return mlx4_qp_attach_common(dev, qp, gid,
 					    block_loopback, prot, type);
 	default:
@@ -3615,9 +3719,9 @@ static int qp_attach(struct mlx4_dev *dev, struct mlx4_qp *qp, u8 gid[16],
 	}
 }
 
-static int qp_detach(struct mlx4_dev *dev, struct mlx4_qp *qp, u8 gid[16],
-		     enum mlx4_protocol prot, enum mlx4_steer_type type,
-		     u64 reg_id)
+static int qp_detach(struct mlx4_dev *dev, struct mlx4_qp *qp,
+		     u8 gid[16], enum mlx4_protocol prot,
+		     enum mlx4_steer_type type, u64 reg_id)
 {
 	switch (dev->caps.steering_mode) {
 	case MLX4_STEERING_MODE_DEVICE_MANAGED:
@@ -3654,7 +3758,7 @@ int mlx4_QP_ATTACH_wrapper(struct mlx4_dev *dev, int slave,
 
 	qp.qpn = qpn;
 	if (attach) {
-		err = qp_attach(dev, &qp, gid, block_loopback, prot,
+		err = qp_attach(dev, slave, &qp, gid, block_loopback, prot,
 				type, &reg_id);
 		if (err) {
 			pr_err("Fail to attach rule to qp 0x%x\n", qpn);
@@ -3790,6 +3894,9 @@ int mlx4_QP_FLOW_STEERING_ATTACH_wrapper(struct mlx4_dev *dev, int slave,
 		return -EOPNOTSUPP;
 
 	ctrl = (struct mlx4_net_trans_rule_hw_ctrl *)inbox->buf;
+	ctrl->port = mlx4_slave_convert_port(dev, slave, ctrl->port);
+	if (ctrl->port <= 0)
+		return -EINVAL;
 	qpn = be32_to_cpu(ctrl->qpn) & 0xffffff;
 	err = get_res(dev, slave, qpn, RES_QP, &rqp);
 	if (err) {
-- 
cgit v1.2.2


From dd41cc3bb90efd455df514899a5d3cf245182eb1 Mon Sep 17 00:00:00 2001
From: Matan Barak <matanb@mellanox.com>
Date: Wed, 19 Mar 2014 18:11:53 +0200
Subject: net/mlx4: Adapt num_vfs/probed_vf params for single port VF

A new syntax is added for the module parameters num_vfs and probe_vf.

  num_vfs=p1,p2,p1+p2
  probe_bf=p1,p2,p1+p2

Where p1(2) is the number of VFs on / probed VFs for physical
port1(2) and p1+p2 is the number of dual port VFs.

Single port VFs are currently supported only when the link type
for both ports of the device is Ethernet.

Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/mellanox/mlx4/main.c | 47 ++++++++++++++++++++++---------
 1 file changed, 34 insertions(+), 13 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c
index 472925428de7..61d7bcff4533 100644
--- a/drivers/net/ethernet/mellanox/mlx4/main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/main.c
@@ -77,13 +77,17 @@ MODULE_PARM_DESC(msi_x, "attempt to use MSI-X if nonzero");
 
 #endif /* CONFIG_PCI_MSI */
 
-static int num_vfs;
-module_param(num_vfs, int, 0444);
-MODULE_PARM_DESC(num_vfs, "enable #num_vfs functions if num_vfs > 0");
-
-static int probe_vf;
-module_param(probe_vf, int, 0644);
-MODULE_PARM_DESC(probe_vf, "number of vfs to probe by pf driver (num_vfs > 0)");
+static uint8_t num_vfs[3] = {0, 0, 0};
+static int num_vfs_argc = 3;
+module_param_array(num_vfs, byte , &num_vfs_argc, 0444);
+MODULE_PARM_DESC(num_vfs, "enable #num_vfs functions if num_vfs > 0\n"
+			  "num_vfs=port1,port2,port1+2");
+
+static uint8_t probe_vf[3] = {0, 0, 0};
+static int probe_vfs_argc = 3;
+module_param_array(probe_vf, byte, &probe_vfs_argc, 0444);
+MODULE_PARM_DESC(probe_vf, "number of vfs to probe by pf driver (num_vfs > 0)\n"
+			   "probe_vf=port1,port2,port1+2");
 
 int mlx4_log_num_mgm_entry_size = MLX4_DEFAULT_MGM_LOG_ENTRY_SIZE;
 module_param_named(log_num_mgm_entry_size,
@@ -2193,7 +2197,10 @@ static int __mlx4_init_one(struct pci_dev *pdev, int pci_dev_data)
 	struct mlx4_dev *dev;
 	int err;
 	int port;
-	int nvfs[MLX4_MAX_PORTS + 1], prb_vf[MLX4_MAX_PORTS + 1];
+	int nvfs[MLX4_MAX_PORTS + 1] = {0, 0, 0};
+	int prb_vf[MLX4_MAX_PORTS + 1] = {0, 0, 0};
+	const int param_map[MLX4_MAX_PORTS + 1][MLX4_MAX_PORTS + 1] = {
+		{2, 0, 0}, {0, 1, 2}, {0, 1, 2} };
 	unsigned total_vfs = 0;
 	int sriov_initialized = 0;
 	unsigned int i;
@@ -2211,16 +2218,17 @@ static int __mlx4_init_one(struct pci_dev *pdev, int pci_dev_data)
 	 * per port, we must limit the number of VFs to 63 (since their are
 	 * 128 MACs)
 	 */
-	for (i = 0; i < sizeof(nvfs)/sizeof(nvfs[0]);
-	     total_vfs += nvfs[i], i++) {
-		nvfs[i] = i == MLX4_MAX_PORTS ? num_vfs : 0;
+	for (i = 0; i < sizeof(nvfs)/sizeof(nvfs[0]) && i < num_vfs_argc;
+	     total_vfs += nvfs[param_map[num_vfs_argc - 1][i]], i++) {
+		nvfs[param_map[num_vfs_argc - 1][i]] = num_vfs[i];
 		if (nvfs[i] < 0) {
 			dev_err(&pdev->dev, "num_vfs module parameter cannot be negative\n");
 			return -EINVAL;
 		}
 	}
-	for (i = 0; i < sizeof(prb_vf)/sizeof(prb_vf[0]); i++) {
-		prb_vf[i] = i == MLX4_MAX_PORTS ? probe_vf : 0;
+	for (i = 0; i < sizeof(prb_vf)/sizeof(prb_vf[0]) && i < probe_vfs_argc;
+	     i++) {
+		prb_vf[param_map[probe_vfs_argc - 1][i]] = probe_vf[i];
 		if (prb_vf[i] < 0 || prb_vf[i] > nvfs[i]) {
 			dev_err(&pdev->dev, "probe_vf module parameter cannot be negative or greater than num_vfs\n");
 			return -EINVAL;
@@ -2450,6 +2458,19 @@ slave_start:
 			goto err_close;
 		}
 		if (sriov_initialized) {
+			int ib_ports = 0;
+			mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_IB)
+				ib_ports++;
+
+			if (ib_ports &&
+			    (num_vfs_argc > 1 || probe_vfs_argc > 1)) {
+				mlx4_err(dev,
+					 "Invalid syntax of num_vfs/probe_vfs "
+					 "with IB port. Single port VFs syntax"
+					 " is only supported when all ports "
+					 "are configured as ethernet\n");
+				goto err_close;
+			}
 			for (i = 0; i < sizeof(nvfs)/sizeof(nvfs[0]); i++) {
 				unsigned j;
 				for (j = 0; j < nvfs[i]; ++sum, ++j) {
-- 
cgit v1.2.2


From 259fef033ffe4e70bf7f358c53400a09f1b5384e Mon Sep 17 00:00:00 2001
From: Ben Chan <benchan@chromium.org>
Date: Wed, 19 Mar 2014 14:00:06 -0700
Subject: net: cdc_ncm: respect operator preferred MTU reported by MBIM

According to "Universal Serial Bus Communications Class Subclass
Specification for Mobile Broadband Interface Model, Revision 1.0,
Errata-1" published by USB-IF, the wMTU field of the MBIM extended
functional descriptor indicates the operator preferred MTU for IP data
streams.

This patch modifies cdc_ncm_setup to ensure that the MTU value set on
the usbnet device does not exceed the operator preferred MTU indicated
by wMTU if the MBIM device exposes a MBIM extended functional
descriptor.

Signed-off-by: Ben Chan <benchan@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/cdc_ncm.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c
index dbff290ed0e4..e8711a8cfa01 100644
--- a/drivers/net/usb/cdc_ncm.c
+++ b/drivers/net/usb/cdc_ncm.c
@@ -74,6 +74,7 @@ static int cdc_ncm_setup(struct usbnet *dev)
 	u8 iface_no;
 	int err;
 	int eth_hlen;
+	u16 mbim_mtu;
 	u16 ntb_fmt_supported;
 	__le16 max_datagram_size;
 
@@ -261,6 +262,14 @@ out:
 	/* set MTU to max supported by the device if necessary */
 	if (dev->net->mtu > ctx->max_datagram_size - eth_hlen)
 		dev->net->mtu = ctx->max_datagram_size - eth_hlen;
+
+	/* do not exceed operater preferred MTU */
+	if (ctx->mbim_extended_desc) {
+		mbim_mtu = le16_to_cpu(ctx->mbim_extended_desc->wMTU);
+		if (mbim_mtu != 0 && mbim_mtu < dev->net->mtu)
+			dev->net->mtu = mbim_mtu;
+	}
+
 	return 0;
 }
 
@@ -399,6 +408,14 @@ int cdc_ncm_bind_common(struct usbnet *dev, struct usb_interface *intf, u8 data_
 			ctx->mbim_desc = (const struct usb_cdc_mbim_desc *)buf;
 			break;
 
+		case USB_CDC_MBIM_EXTENDED_TYPE:
+			if (buf[0] < sizeof(*(ctx->mbim_extended_desc)))
+				break;
+
+			ctx->mbim_extended_desc =
+				(const struct usb_cdc_mbim_extended_desc *)buf;
+			break;
+
 		default:
 			break;
 		}
-- 
cgit v1.2.2


From aa8d422510969b705656e49fc0166d862aca9246 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Date: Thu, 20 Mar 2014 15:00:31 +0100
Subject: sh_eth: Use the platform device for memory allocation

Memory allocated for the MDIO bus with the devm_kzalloc() API is
associated with the network device. While this will cause memory to be
freed at the right time, it doesn't allow allocating memory before the
network device is initialized.

Replace the network device with the parent platform device for memory
allocation to remove that dependency. This also improves consistency
with the other devm_* calls in the driver that all use the platform
device.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/renesas/sh_eth.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index efaca6d5e85b..f669e2aac9bd 100644
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -2606,10 +2606,10 @@ static int sh_mdio_init(struct net_device *ndev, int id,
 	int ret, i;
 	struct bb_info *bitbang;
 	struct sh_eth_private *mdp = netdev_priv(ndev);
+	struct device *dev = &mdp->pdev->dev;
 
 	/* create bit control struct for PHY */
-	bitbang = devm_kzalloc(&ndev->dev, sizeof(struct bb_info),
-			       GFP_KERNEL);
+	bitbang = devm_kzalloc(dev, sizeof(struct bb_info), GFP_KERNEL);
 	if (!bitbang) {
 		ret = -ENOMEM;
 		goto out;
@@ -2638,8 +2638,7 @@ static int sh_mdio_init(struct net_device *ndev, int id,
 		 mdp->pdev->name, id);
 
 	/* PHY IRQ */
-	mdp->mii_bus->irq = devm_kzalloc(&ndev->dev,
-					 sizeof(int) * PHY_MAX_ADDR,
+	mdp->mii_bus->irq = devm_kzalloc(dev, sizeof(int) * PHY_MAX_ADDR,
 					 GFP_KERNEL);
 	if (!mdp->mii_bus->irq) {
 		ret = -ENOMEM;
-- 
cgit v1.2.2


From a5bd60608936fbb84471a80592401ce29a68de71 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Date: Thu, 20 Mar 2014 15:00:32 +0100
Subject: sh_eth: Use the platform device as the MDIO bus parent

The MDIO bus parent is set to the network device. Beside not reflecting
the hardware topology, this prevents registering the MDIO bus before
initializing the network device. Fix it by setting the MDIO bus parent
to the platform device.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/renesas/sh_eth.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index f669e2aac9bd..443f14f0d8a0 100644
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -2633,7 +2633,7 @@ static int sh_mdio_init(struct net_device *ndev, int id,
 
 	/* Hook up MII support for ethtool */
 	mdp->mii_bus->name = "sh_mii";
-	mdp->mii_bus->parent = &ndev->dev;
+	mdp->mii_bus->parent = dev;
 	snprintf(mdp->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x",
 		 mdp->pdev->name, id);
 
-- 
cgit v1.2.2


From bd920ff553ba17f19372501a14e432d9d92b102b Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Date: Thu, 20 Mar 2014 15:00:33 +0100
Subject: sh_eth: Simplify MDIO bus initialization and release

The network device passed to the sh_mdio_init and sh_mdio_release
functions is only used to access the sh_eth_private instance. Pass it
directly to those functions.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/renesas/sh_eth.c | 30 +++++++++++-------------------
 1 file changed, 11 insertions(+), 19 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index 443f14f0d8a0..e9224f285c02 100644
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -2583,29 +2583,24 @@ static void sh_eth_tsu_init(struct sh_eth_private *mdp)
 }
 
 /* MDIO bus release function */
-static int sh_mdio_release(struct net_device *ndev)
+static int sh_mdio_release(struct sh_eth_private *mdp)
 {
-	struct mii_bus *bus = dev_get_drvdata(&ndev->dev);
-
 	/* unregister mdio bus */
-	mdiobus_unregister(bus);
-
-	/* remove mdio bus info from net_device */
-	dev_set_drvdata(&ndev->dev, NULL);
+	mdiobus_unregister(mdp->mii_bus);
 
 	/* free bitbang info */
-	free_mdio_bitbang(bus);
+	free_mdio_bitbang(mdp->mii_bus);
 
 	return 0;
 }
 
 /* MDIO bus init function */
-static int sh_mdio_init(struct net_device *ndev, int id,
+static int sh_mdio_init(struct sh_eth_private *mdp,
 			struct sh_eth_plat_data *pd)
 {
 	int ret, i;
 	struct bb_info *bitbang;
-	struct sh_eth_private *mdp = netdev_priv(ndev);
+	struct platform_device *pdev = mdp->pdev;
 	struct device *dev = &mdp->pdev->dev;
 
 	/* create bit control struct for PHY */
@@ -2635,7 +2630,7 @@ static int sh_mdio_init(struct net_device *ndev, int id,
 	mdp->mii_bus->name = "sh_mii";
 	mdp->mii_bus->parent = dev;
 	snprintf(mdp->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x",
-		 mdp->pdev->name, id);
+		 pdev->name, pdev->id);
 
 	/* PHY IRQ */
 	mdp->mii_bus->irq = devm_kzalloc(dev, sizeof(int) * PHY_MAX_ADDR,
@@ -2645,10 +2640,9 @@ static int sh_mdio_init(struct net_device *ndev, int id,
 		goto out_free_bus;
 	}
 
-	/* register mdio bus */
-	if (ndev->dev.parent->of_node) {
-		ret = of_mdiobus_register(mdp->mii_bus,
-					  ndev->dev.parent->of_node);
+	/* register MDIO bus */
+	if (dev->of_node) {
+		ret = of_mdiobus_register(mdp->mii_bus, dev->of_node);
 	} else {
 		for (i = 0; i < PHY_MAX_ADDR; i++)
 			mdp->mii_bus->irq[i] = PHY_POLL;
@@ -2661,8 +2655,6 @@ static int sh_mdio_init(struct net_device *ndev, int id,
 	if (ret)
 		goto out_free_bus;
 
-	dev_set_drvdata(&ndev->dev, mdp->mii_bus);
-
 	return 0;
 
 out_free_bus:
@@ -2907,7 +2899,7 @@ static int sh_eth_drv_probe(struct platform_device *pdev)
 		goto out_napi_del;
 
 	/* mdio bus init */
-	ret = sh_mdio_init(ndev, pdev->id, pd);
+	ret = sh_mdio_init(mdp, pd);
 	if (ret) {
 		dev_err(&ndev->dev, "failed to initialise MDIO\n");
 		goto out_unregister;
@@ -2941,7 +2933,7 @@ static int sh_eth_drv_remove(struct platform_device *pdev)
 	struct net_device *ndev = platform_get_drvdata(pdev);
 	struct sh_eth_private *mdp = netdev_priv(ndev);
 
-	sh_mdio_release(ndev);
+	sh_mdio_release(mdp);
 	unregister_netdev(ndev);
 	netif_napi_del(&mdp->napi);
 	pm_runtime_disable(&pdev->dev);
-- 
cgit v1.2.2


From daacf03f0bbfefee3df107c3f7659d22e22538a7 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Date: Thu, 20 Mar 2014 15:00:34 +0100
Subject: sh_eth: Register MDIO bus before registering the network device

Network API functions that rely on the MDIO bus can be called as soon as
the driver calls register_netdev(). Register the MDIO bus before the
network device to avoid race conditions.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/renesas/sh_eth.c | 20 +++++++++-----------
 1 file changed, 9 insertions(+), 11 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index e9224f285c02..ace6da257440 100644
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -2891,6 +2891,13 @@ static int sh_eth_drv_probe(struct platform_device *pdev)
 		}
 	}
 
+	/* MDIO bus init */
+	ret = sh_mdio_init(mdp, pd);
+	if (ret) {
+		dev_err(&ndev->dev, "failed to initialise MDIO\n");
+		goto out_release;
+	}
+
 	netif_napi_add(ndev, &mdp->napi, sh_eth_poll, 64);
 
 	/* network device register */
@@ -2898,13 +2905,6 @@ static int sh_eth_drv_probe(struct platform_device *pdev)
 	if (ret)
 		goto out_napi_del;
 
-	/* mdio bus init */
-	ret = sh_mdio_init(mdp, pd);
-	if (ret) {
-		dev_err(&ndev->dev, "failed to initialise MDIO\n");
-		goto out_unregister;
-	}
-
 	/* print device information */
 	netdev_info(ndev, "Base address at 0x%x, %pM, IRQ %d.\n",
 		    (u32)ndev->base_addr, ndev->dev_addr, ndev->irq);
@@ -2913,11 +2913,9 @@ static int sh_eth_drv_probe(struct platform_device *pdev)
 
 	return ret;
 
-out_unregister:
-	unregister_netdev(ndev);
-
 out_napi_del:
 	netif_napi_del(&mdp->napi);
+	sh_mdio_release(mdp);
 
 out_release:
 	/* net_dev free */
@@ -2933,9 +2931,9 @@ static int sh_eth_drv_remove(struct platform_device *pdev)
 	struct net_device *ndev = platform_get_drvdata(pdev);
 	struct sh_eth_private *mdp = netdev_priv(ndev);
 
-	sh_mdio_release(mdp);
 	unregister_netdev(ndev);
 	netif_napi_del(&mdp->napi);
+	sh_mdio_release(mdp);
 	pm_runtime_disable(&pdev->dev);
 	free_netdev(ndev);
 
-- 
cgit v1.2.2


From f738a13d8365b0f824f3f20450b413f55374f175 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Date: Thu, 20 Mar 2014 15:00:35 +0100
Subject: sh_eth: Remove goto statements that jump straight to a return

"goto" is well accepted for error paths in the kernel but should not be
used unnecessarily. Return the correct value directly instead of using a
goto when possible.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/renesas/sh_eth.c | 30 +++++++++---------------------
 1 file changed, 9 insertions(+), 21 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index ace6da257440..e4bff181c910 100644
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -873,7 +873,7 @@ static int sh_eth_reset(struct net_device *ndev)
 
 		ret = sh_eth_check_reset(ndev);
 		if (ret)
-			goto out;
+			return ret;
 
 		/* Table Init */
 		sh_eth_write(ndev, 0x0, TDLAR);
@@ -900,7 +900,6 @@ static int sh_eth_reset(struct net_device *ndev)
 			     EDMR);
 	}
 
-out:
 	return ret;
 }
 
@@ -1264,7 +1263,7 @@ static int sh_eth_dev_init(struct net_device *ndev, bool start)
 	/* Soft Reset */
 	ret = sh_eth_reset(ndev);
 	if (ret)
-		goto out;
+		return ret;
 
 	if (mdp->cd->rmiimode)
 		sh_eth_write(ndev, 0x1, RMIIMODE);
@@ -1343,7 +1342,6 @@ static int sh_eth_dev_init(struct net_device *ndev, bool start)
 		netif_start_queue(ndev);
 	}
 
-out:
 	return ret;
 }
 
@@ -2605,10 +2603,8 @@ static int sh_mdio_init(struct sh_eth_private *mdp,
 
 	/* create bit control struct for PHY */
 	bitbang = devm_kzalloc(dev, sizeof(struct bb_info), GFP_KERNEL);
-	if (!bitbang) {
-		ret = -ENOMEM;
-		goto out;
-	}
+	if (!bitbang)
+		return -ENOMEM;
 
 	/* bitbang init */
 	bitbang->addr = mdp->addr + mdp->reg_offset[PIR];
@@ -2621,10 +2617,8 @@ static int sh_mdio_init(struct sh_eth_private *mdp,
 
 	/* MII controller setting */
 	mdp->mii_bus = alloc_mdio_bitbang(&bitbang->ctrl);
-	if (!mdp->mii_bus) {
-		ret = -ENOMEM;
-		goto out;
-	}
+	if (!mdp->mii_bus)
+		return -ENOMEM;
 
 	/* Hook up MII support for ethtool */
 	mdp->mii_bus->name = "sh_mii";
@@ -2659,8 +2653,6 @@ static int sh_mdio_init(struct sh_eth_private *mdp,
 
 out_free_bus:
 	free_mdio_bitbang(mdp->mii_bus);
-
-out:
 	return ret;
 }
 
@@ -2773,15 +2765,12 @@ static int sh_eth_drv_probe(struct platform_device *pdev)
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (unlikely(res == NULL)) {
 		dev_err(&pdev->dev, "invalid resource\n");
-		ret = -EINVAL;
-		goto out;
+		return -EINVAL;
 	}
 
 	ndev = alloc_etherdev(sizeof(struct sh_eth_private));
-	if (!ndev) {
-		ret = -ENOMEM;
-		goto out;
-	}
+	if (!ndev)
+		return -ENOMEM;
 
 	/* The sh Ether-specific entries in the device structure. */
 	ndev->base_addr = res->start;
@@ -2922,7 +2911,6 @@ out_release:
 	if (ndev)
 		free_netdev(ndev);
 
-out:
 	return ret;
 }
 
-- 
cgit v1.2.2


From 9460c936794fbcf82623e263926b17334ca5887a Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Thu, 20 Mar 2014 10:53:20 -0700
Subject: net: bcmgenet: remove unused spinlock member

The spinlock cookie in bcmgenet_priv is never used, get rid of it.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/genet/bcmgenet.c | 1 -
 drivers/net/ethernet/broadcom/genet/bcmgenet.h | 1 -
 2 files changed, 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index 72ce6e8115fa..e836c4c35399 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -2498,7 +2498,6 @@ static int bcmgenet_probe(struct platform_device *pdev)
 
 	bcmgenet_set_hw_params(priv);
 
-	spin_lock_init(&priv->lock);
 	/* Mii wait queue */
 	init_waitqueue_head(&priv->wq);
 	/* Always use RX_BUF_LENGTH (2KB) buffer for all chips */
diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.h b/drivers/net/ethernet/broadcom/genet/bcmgenet.h
index a6758adefaab..0f117105fed1 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.h
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.h
@@ -523,7 +523,6 @@ struct bcmgenet_priv {
 	void __iomem *base;
 	enum bcmgenet_version version;
 	struct net_device *dev;
-	spinlock_t lock;
 	u32 int0_mask;
 	u32 int1_mask;
 
-- 
cgit v1.2.2


From d03825fba459d0d58e4fe162439babfc5f5eabc4 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Thu, 20 Mar 2014 10:53:21 -0700
Subject: net: bcmgenet: add skb_tx_timestamp call

The BCMGENET driver was not TX timestamping the SKBs it queued for
transmission, do this in bcmgenet_xmit() right before kicking the
Transmit DMA engine.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/genet/bcmgenet.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index e836c4c35399..0a9f6df819bb 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -1176,6 +1176,8 @@ static netdev_tx_t bcmgenet_xmit(struct sk_buff *skb, struct net_device *dev)
 		}
 	}
 
+	skb_tx_timestamp(skb);
+
 	/* we kept a software copy of how much we should advance the TDMA
 	 * producer index, now write it down to the hardware
 	 */
-- 
cgit v1.2.2


From d5c76f628d399f06785b0ee910c431770a01b807 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Thu, 20 Mar 2014 10:53:22 -0700
Subject: net: bcmgenet: remove bogus tx queue checks

netdev_pick_tx already takes care of making sure that a given
skb->queue_mapping value will remain within the number of advertised
hardware queue number, there is no need to re-do this again in the
driver.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/genet/bcmgenet.c | 8 --------
 1 file changed, 8 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index 0a9f6df819bb..cfcb046f4de5 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -1125,14 +1125,6 @@ static netdev_tx_t bcmgenet_xmit(struct sk_buff *skb, struct net_device *dev)
 	else
 		index -= 1;
 
-	if ((index != DESC_INDEX) && (index > priv->hw_params->tx_queues - 1)) {
-		netdev_err(dev, "%s: queue_mapping %d is invalid\n",
-				__func__, skb_get_queue_mapping(skb));
-		dev->stats.tx_errors++;
-		dev->stats.tx_dropped++;
-		ret = NETDEV_TX_OK;
-		goto out;
-	}
 	nr_frags = skb_shinfo(skb)->nr_frags;
 	ring = &priv->tx_rings[index];
 
-- 
cgit v1.2.2


From b2cde2cc71f2382e4a4bfaaacd5263bd93f1e0d2 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Thu, 20 Mar 2014 10:53:23 -0700
Subject: net: bcmgenet: manipulate netdev_queue directly

Instead of always invoking netdev_get_tx_queue() in bcmgenet_xmit() and
bcmgenet_tx_reclaim(), just get the corresponding netdev_queue pointer
once and for all and manipulate it throughout bcmgenet_xmit() and
bcmgenet_tx_reclaim().

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/genet/bcmgenet.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index cfcb046f4de5..8f87fe001541 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -868,10 +868,12 @@ static void __bcmgenet_tx_reclaim(struct net_device *dev,
 	struct bcmgenet_priv *priv = netdev_priv(dev);
 	int last_tx_cn, last_c_index, num_tx_bds;
 	struct enet_cb *tx_cb_ptr;
+	struct netdev_queue *txq;
 	unsigned int c_index;
 
 	/* Compute how many buffers are transmited since last xmit call */
 	c_index = bcmgenet_tdma_ring_readl(priv, ring->index, TDMA_CONS_INDEX);
+	txq = netdev_get_tx_queue(dev, ring->queue);
 
 	last_c_index = ring->c_index;
 	num_tx_bds = ring->size;
@@ -917,8 +919,8 @@ static void __bcmgenet_tx_reclaim(struct net_device *dev,
 	if (ring->free_bds > (MAX_SKB_FRAGS + 1))
 		ring->int_disable(priv, ring);
 
-	if (__netif_subqueue_stopped(dev, ring->queue))
-		netif_wake_subqueue(dev, ring->queue);
+	if (netif_tx_queue_stopped(txq))
+		netif_tx_wake_queue(txq);
 
 	ring->c_index = c_index;
 }
@@ -1106,6 +1108,7 @@ static netdev_tx_t bcmgenet_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct bcmgenet_priv *priv = netdev_priv(dev);
 	struct bcmgenet_tx_ring *ring = NULL;
+	struct netdev_queue *txq;
 	unsigned long flags = 0;
 	int nr_frags, index;
 	u16 dma_desc_flags;
@@ -1127,10 +1130,11 @@ static netdev_tx_t bcmgenet_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	nr_frags = skb_shinfo(skb)->nr_frags;
 	ring = &priv->tx_rings[index];
+	txq = netdev_get_tx_queue(dev, ring->queue);
 
 	spin_lock_irqsave(&ring->lock, flags);
 	if (ring->free_bds <= nr_frags + 1) {
-		netif_stop_subqueue(dev, ring->queue);
+		netif_tx_stop_queue(txq);
 		netdev_err(dev, "%s: tx ring %d full when queue %d awake\n",
 				__func__, index, ring->queue);
 		ret = NETDEV_TX_BUSY;
@@ -1177,7 +1181,7 @@ static netdev_tx_t bcmgenet_xmit(struct sk_buff *skb, struct net_device *dev)
 			ring->prod_index, TDMA_PROD_INDEX);
 
 	if (ring->free_bds <= (MAX_SKB_FRAGS + 1)) {
-		netif_stop_subqueue(dev, ring->queue);
+		netif_tx_stop_queue(txq);
 		ring->int_enable(priv, ring);
 	}
 
-- 
cgit v1.2.2


From bee5af7e21939c54538b8d1555b4c568e9fbd235 Mon Sep 17 00:00:00 2001
From: Anjali Singhai Jain <anjali.singhai@intel.com>
Date: Thu, 6 Mar 2014 08:59:50 +0000
Subject: i40e/i40evf: Add EEE LPI stats

Add 4 new stats to keep track of EEE LPI (Low Power Idle) state.

Change-ID: Id6316619bb0559789770288b694a54d17f8fac5c
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Acked-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Kevin Scott <kevin.c.scott@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_ethtool.c |  5 +++++
 drivers/net/ethernet/intel/i40e/i40e_main.c    | 15 +++++++++++++++
 drivers/net/ethernet/intel/i40e/i40e_type.h    |  5 +++++
 drivers/net/ethernet/intel/i40evf/i40e_type.h  |  5 +++++
 4 files changed, 30 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index 6049e63a826d..28da4125c8c9 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -114,6 +114,11 @@ static struct i40e_stats i40e_gstrings_stats[] = {
 	I40E_PF_STAT("VF_admin_queue_requests", vf_aq_requests),
 	I40E_PF_STAT("tx_hwtstamp_timeouts", tx_hwtstamp_timeouts),
 	I40E_PF_STAT("rx_hwtstamp_cleared", rx_hwtstamp_cleared),
+	/* LPI stats */
+	I40E_PF_STAT("tx_lpi_status", stats.tx_lpi_status),
+	I40E_PF_STAT("rx_lpi_status", stats.rx_lpi_status),
+	I40E_PF_STAT("tx_lpi_count", stats.tx_lpi_count),
+	I40E_PF_STAT("rx_lpi_count", stats.rx_lpi_count),
 };
 
 #define I40E_QUEUE_STATS_LEN(n) \
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 113354214517..a1f33693be05 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -740,6 +740,7 @@ void i40e_update_stats(struct i40e_vsi *vsi)
 	u32 rx_page, rx_buf;
 	u64 rx_p, rx_b;
 	u64 tx_p, tx_b;
+	u32 val;
 	int i;
 	u16 q;
 
@@ -972,6 +973,20 @@ void i40e_update_stats(struct i40e_vsi *vsi)
 		i40e_stat_update32(hw, I40E_GLPRT_RJC(hw->port),
 				   pf->stat_offsets_loaded,
 				   &osd->rx_jabber, &nsd->rx_jabber);
+
+		val = rd32(hw, I40E_PRTPM_EEE_STAT);
+		nsd->tx_lpi_status =
+			       (val & I40E_PRTPM_EEE_STAT_TX_LPI_STATUS_MASK) >>
+				I40E_PRTPM_EEE_STAT_TX_LPI_STATUS_SHIFT;
+		nsd->rx_lpi_status =
+			       (val & I40E_PRTPM_EEE_STAT_RX_LPI_STATUS_MASK) >>
+				I40E_PRTPM_EEE_STAT_RX_LPI_STATUS_SHIFT;
+		i40e_stat_update32(hw, I40E_PRTPM_TLPIC,
+				   pf->stat_offsets_loaded,
+				   &osd->tx_lpi_count, &nsd->tx_lpi_count);
+		i40e_stat_update32(hw, I40E_PRTPM_RLPIC,
+				   pf->stat_offsets_loaded,
+				   &osd->rx_lpi_count, &nsd->rx_lpi_count);
 	}
 
 	pf->stat_offsets_loaded = true;
diff --git a/drivers/net/ethernet/intel/i40e/i40e_type.h b/drivers/net/ethernet/intel/i40e/i40e_type.h
index 5c902f448b1d..d2f0b95fd0d7 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_type.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_type.h
@@ -1014,6 +1014,11 @@ struct i40e_hw_port_stats {
 	u64 tx_size_big;		/* ptc9522 */
 	u64 mac_short_packet_dropped;	/* mspdc */
 	u64 checksum_error;		/* xec */
+	/* EEE LPI */
+	bool tx_lpi_status;
+	bool rx_lpi_status;
+	u64 tx_lpi_count;		/* etlpic */
+	u64 rx_lpi_count;		/* erlpic */
 };
 
 /* Checksum and Shadow RAM pointers */
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_type.h b/drivers/net/ethernet/intel/i40evf/i40e_type.h
index 7189d6f08ddd..efe73ad6fdb9 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_type.h
+++ b/drivers/net/ethernet/intel/i40evf/i40e_type.h
@@ -1020,6 +1020,11 @@ struct i40e_hw_port_stats {
 	u64 tx_size_big;		/* ptc9522 */
 	u64 mac_short_packet_dropped;	/* mspdc */
 	u64 checksum_error;		/* xec */
+	/* EEE LPI */
+	bool tx_lpi_status;
+	bool rx_lpi_status;
+	u64 tx_lpi_count;		/* etlpic */
+	u64 rx_lpi_count;		/* erlpic */
 };
 
 /* Checksum and Shadow RAM pointers */
-- 
cgit v1.2.2


From 0b67584f8047cf5abdad23a4ee1558c488684752 Mon Sep 17 00:00:00 2001
From: Anjali Singhai Jain <anjali.singhai@intel.com>
Date: Thu, 6 Mar 2014 08:59:51 +0000
Subject: i40e: Fix a message string

Change string from "Side Band" to "Sideband" for consistency.

Change-ID: I45f05466bb5c63b0f999d743312bcb61b5bd6518
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index a1f33693be05..28df88ef3c8b 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -6396,7 +6396,7 @@ static int i40e_sw_init(struct i40e_pf *pf)
 			pf->flags |= I40E_FLAG_FD_SB_ENABLED;
 		} else {
 			dev_info(&pf->pdev->dev,
-				 "Flow Director Side Band mode Disabled in MFP mode\n");
+				 "Flow Director Sideband mode Disabled in MFP mode\n");
 		}
 		pf->fdir_pf_filter_count =
 				 pf->hw.func_caps.fd_filters_guaranteed;
-- 
cgit v1.2.2


From c89a9e00f90cea4d824ff5890c86332a6687f830 Mon Sep 17 00:00:00 2001
From: Mitch Williams <mitch.a.williams@intel.com>
Date: Thu, 6 Mar 2014 08:59:52 +0000
Subject: i40evf: don't shut down admin queue on error

If the driver encounters an error while communicating with the PF
driver,  don't just shut down the admin queue unconditionally. The PF
may be delayed, and shutting down the admin queue causes it to fail
completely. If this happens, the VF will never complete initialization.

Change-ID: I6192e9d8caeefb738428c3597fa2f54fa400ce7f
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40evf/i40evf_main.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index d381bcc4ea9f..4d547abc59dc 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -2133,8 +2133,6 @@ err_alloc:
 	kfree(adapter->vf_res);
 	adapter->vf_res = NULL;
 err:
-	if (hw->aq.asq.count)
-		i40evf_shutdown_adminq(hw); /* ignore error */
 	/* Things went into the weeds, so try again later */
 	if (++adapter->aq_wait_count > I40EVF_AQ_MAX_ERR) {
 		dev_err(&pdev->dev, "Failed to communicate with PF; giving up.\n");
-- 
cgit v1.2.2


From 10bdd67b4a19e0e4cd96ca0591adcde80907874d Mon Sep 17 00:00:00 2001
From: Mitch Williams <mitch.a.williams@intel.com>
Date: Thu, 6 Mar 2014 08:59:53 +0000
Subject: i40evf: clean up init error messages

Add an error message when the admin queue message never completes, and
fix formatting on another one that was unnecessarily wrapped.

Change-ID: I8b8a4eb7629d741f09357250144023cd4a72231f
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40evf/i40evf_main.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index 4d547abc59dc..d3eafa320ba9 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -1968,8 +1968,7 @@ static void i40evf_init_task(struct work_struct *work)
 		}
 		err = i40evf_send_api_ver(adapter);
 		if (err) {
-			dev_err(&pdev->dev, "Unable to send to PF (%d)\n",
-				err);
+			dev_err(&pdev->dev, "Unable to send to PF (%d)\n", err);
 			i40evf_shutdown_adminq(hw);
 			goto err;
 		}
@@ -1977,8 +1976,10 @@ static void i40evf_init_task(struct work_struct *work)
 		goto restart;
 		break;
 	case __I40EVF_INIT_VERSION_CHECK:
-		if (!i40evf_asq_done(hw))
+		if (!i40evf_asq_done(hw)) {
+			dev_err(&pdev->dev, "Admin queue command never completed.\n");
 			goto err;
+		}
 
 		/* aq msg sent, awaiting reply */
 		err = i40evf_verify_api_ver(adapter);
-- 
cgit v1.2.2


From 19458bd425c0ee21bb35958c60d3682f9c42f274 Mon Sep 17 00:00:00 2001
From: Mark Rustad <mark.d.rustad@intel.com>
Date: Sat, 1 Mar 2014 05:21:00 +0000
Subject: ixgbe: Break recursion in case of removal

When an adapter is removed and registers all read as all one's,
an infinite recursion can happen between ixgbe_clear_vmdq_generic
and ixgbe_clear_rar_generic. Adding a check for removal breaks
this recursion.

Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_common.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
index 911b711b6ba1..24fba39e194e 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
@@ -2913,6 +2913,9 @@ s32 ixgbe_clear_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
 	mpsar_lo = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar));
 	mpsar_hi = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar));
 
+	if (ixgbe_removed(hw->hw_addr))
+		goto done;
+
 	if (!mpsar_lo && !mpsar_hi)
 		goto done;
 
-- 
cgit v1.2.2


From 06380db6fc08713682bf210c0ee3ef19b457bc14 Mon Sep 17 00:00:00 2001
From: Mark Rustad <mark.d.rustad@intel.com>
Date: Tue, 4 Mar 2014 03:02:23 +0000
Subject: ixgbevf: Use static inlines instead of macros

Kernel coding standard prefers static inline functions instead
of macros, so use them for register accessors. This is to prepare
for adding LER, Live Error Recovery, checks to those accessors.

Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbevf/ixgbevf.h      |  5 ++++
 drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c |  4 ++--
 drivers/net/ethernet/intel/ixgbevf/regs.h         | 12 +---------
 drivers/net/ethernet/intel/ixgbevf/vf.h           | 28 ++++++++++++++++++++++-
 4 files changed, 35 insertions(+), 14 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf.h b/drivers/net/ethernet/intel/ixgbevf/ixgbevf.h
index 08fb88aba67b..d4b1f50fb2ad 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf.h
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf.h
@@ -315,6 +315,11 @@ static inline u16 ixgbevf_desc_unused(struct ixgbevf_ring *ring)
 	return ((ntc > ntu) ? 0 : ring->count) + ntc - ntu - 1;
 }
 
+static inline void ixgbevf_write_tail(struct ixgbevf_ring *ring, u32 value)
+{
+	writel(value, ring->tail);
+}
+
 #define IXGBEVF_RX_DESC(R, i)	    \
 	(&(((union ixgbe_adv_rx_desc *)((R)->desc))[i]))
 #define IXGBEVF_TX_DESC(R, i)	    \
diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
index 592d8a6baabc..74df8bf8619d 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
@@ -111,7 +111,7 @@ static inline void ixgbevf_release_rx_desc(struct ixgbevf_ring *rx_ring,
 	 * such as IA-64).
 	 */
 	wmb();
-	writel(val, rx_ring->tail);
+	ixgbevf_write_tail(rx_ring, val);
 }
 
 /**
@@ -3060,7 +3060,7 @@ static void ixgbevf_tx_map(struct ixgbevf_ring *tx_ring,
 	tx_ring->next_to_use = i;
 
 	/* notify HW of packet */
-	writel(i, tx_ring->tail);
+	ixgbevf_write_tail(tx_ring, i);
 
 	return;
 dma_error:
diff --git a/drivers/net/ethernet/intel/ixgbevf/regs.h b/drivers/net/ethernet/intel/ixgbevf/regs.h
index debd8c0e1f28..09dd8f698bea 100644
--- a/drivers/net/ethernet/intel/ixgbevf/regs.h
+++ b/drivers/net/ethernet/intel/ixgbevf/regs.h
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel 82599 Virtual Function driver
-  Copyright(c) 1999 - 2012 Intel Corporation.
+  Copyright(c) 1999 - 2014 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -70,16 +70,6 @@
 #define IXGBE_VFGOTC_MSB       0x02024
 #define IXGBE_VFMPRC           0x01034
 
-#define IXGBE_WRITE_REG(a, reg, value) writel((value), ((a)->hw_addr + (reg)))
-
-#define IXGBE_READ_REG(a, reg) readl((a)->hw_addr + (reg))
-
-#define IXGBE_WRITE_REG_ARRAY(a, reg, offset, value) ( \
-    writel((value), ((a)->hw_addr + (reg) + ((offset) << 2))))
-
-#define IXGBE_READ_REG_ARRAY(a, reg, offset) ( \
-    readl((a)->hw_addr + (reg) + ((offset) << 2)))
-
 #define IXGBE_WRITE_FLUSH(a) (IXGBE_READ_REG(a, IXGBE_VFSTATUS))
 
 #endif /* _IXGBEVF_REGS_H_ */
diff --git a/drivers/net/ethernet/intel/ixgbevf/vf.h b/drivers/net/ethernet/intel/ixgbevf/vf.h
index 7b1f502d1716..8ebed729c70f 100644
--- a/drivers/net/ethernet/intel/ixgbevf/vf.h
+++ b/drivers/net/ethernet/intel/ixgbevf/vf.h
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel 82599 Virtual Function driver
-  Copyright(c) 1999 - 2012 Intel Corporation.
+  Copyright(c) 1999 - 2014 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -172,6 +172,32 @@ struct ixgbevf_info {
 	const struct ixgbe_mac_operations *mac_ops;
 };
 
+static inline void ixgbe_write_reg(struct ixgbe_hw *hw, u32 reg, u32 value)
+{
+	writel(value, hw->hw_addr + reg);
+}
+#define IXGBE_WRITE_REG(h, r, v) ixgbe_write_reg(h, r, v)
+
+static inline u32 ixgbe_read_reg(struct ixgbe_hw *hw, u32 reg)
+{
+	return readl(hw->hw_addr + reg);
+}
+#define IXGBE_READ_REG(h, r) ixgbe_read_reg(h, r)
+
+static inline void ixgbe_write_reg_array(struct ixgbe_hw *hw, u32 reg,
+					  u32 offset, u32 value)
+{
+	ixgbe_write_reg(hw, reg + (offset << 2), value);
+}
+#define IXGBE_WRITE_REG_ARRAY(h, r, o, v) ixgbe_write_reg_array(h, r, o, v)
+
+static inline u32 ixgbe_read_reg_array(struct ixgbe_hw *hw, u32 reg,
+					u32 offset)
+{
+	return ixgbe_read_reg(hw, reg + (offset << 2));
+}
+#define IXGBE_READ_REG_ARRAY(h, r, o) ixgbe_read_reg_array(h, r, o)
+
 void ixgbevf_rlpml_set_vf(struct ixgbe_hw *hw, u16 max_size);
 int ixgbevf_negotiate_api_version(struct ixgbe_hw *hw, int api);
 int ixgbevf_get_queues(struct ixgbe_hw *hw, unsigned int *num_tcs,
-- 
cgit v1.2.2


From 388b2e4c0f09fa6f98f687b5ae8f3db6fd247e9d Mon Sep 17 00:00:00 2001
From: Mark Rustad <mark.d.rustad@intel.com>
Date: Tue, 4 Mar 2014 03:02:29 +0000
Subject: ixgbevf: Make the ethtool register test use accessors

Make the ethtool register test use the normal register accessor
functions. Also eliminate macros used for calling register test
functions to make error exits clearer.

Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbevf/ethtool.c | 119 +++++++++++++++------------
 1 file changed, 67 insertions(+), 52 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgbevf/ethtool.c b/drivers/net/ethernet/intel/ixgbevf/ethtool.c
index f68b78c732a8..c769a8d364b6 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ethtool.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ethtool.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel 82599 Virtual Function driver
-  Copyright(c) 1999 - 2012 Intel Corporation.
+  Copyright(c) 1999 - 2014 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -530,41 +530,47 @@ static const u32 register_test_patterns[] = {
 	0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF
 };
 
-#define REG_PATTERN_TEST(R, M, W)                                             \
-{                                                                             \
-	u32 pat, val, before;                                                 \
-	for (pat = 0; pat < ARRAY_SIZE(register_test_patterns); pat++) {      \
-		before = readl(adapter->hw.hw_addr + R);                      \
-		writel((register_test_patterns[pat] & W),                     \
-		       (adapter->hw.hw_addr + R));                            \
-		val = readl(adapter->hw.hw_addr + R);                         \
-		if (val != (register_test_patterns[pat] & W & M)) {           \
-			hw_dbg(&adapter->hw,                                  \
-			"pattern test reg %04X failed: got "                  \
-			"0x%08X expected 0x%08X\n",                           \
-			R, val, (register_test_patterns[pat] & W & M));       \
-			*data = R;                                            \
-			writel(before, adapter->hw.hw_addr + R);              \
-			return 1;                                             \
-		}                                                             \
-		writel(before, adapter->hw.hw_addr + R);                      \
-	}                                                                     \
+static bool reg_pattern_test(struct ixgbevf_adapter *adapter, u64 *data,
+			     int reg, u32 mask, u32 write)
+{
+	u32 pat, val, before;
+
+	for (pat = 0; pat < ARRAY_SIZE(register_test_patterns); pat++) {
+		before = ixgbe_read_reg(&adapter->hw, reg);
+		ixgbe_write_reg(&adapter->hw, reg,
+				register_test_patterns[pat] & write);
+		val = ixgbe_read_reg(&adapter->hw, reg);
+		if (val != (register_test_patterns[pat] & write & mask)) {
+			hw_dbg(&adapter->hw,
+			       "pattern test reg %04X failed: got 0x%08X expected 0x%08X\n",
+			       reg, val,
+			       register_test_patterns[pat] & write & mask);
+			*data = reg;
+			ixgbe_write_reg(&adapter->hw, reg, before);
+			return true;
+		}
+		ixgbe_write_reg(&adapter->hw, reg, before);
+	}
+	return false;
 }
 
-#define REG_SET_AND_CHECK(R, M, W)                                            \
-{                                                                             \
-	u32 val, before;                                                      \
-	before = readl(adapter->hw.hw_addr + R);                              \
-	writel((W & M), (adapter->hw.hw_addr + R));                           \
-	val = readl(adapter->hw.hw_addr + R);                                 \
-	if ((W & M) != (val & M)) {                                           \
-		pr_err("set/check reg %04X test failed: got 0x%08X expected " \
-		       "0x%08X\n", R, (val & M), (W & M));                    \
-		*data = R;                                                    \
-		writel(before, (adapter->hw.hw_addr + R));                    \
-		return 1;                                                     \
-	}                                                                     \
-	writel(before, (adapter->hw.hw_addr + R));                            \
+static bool reg_set_and_check(struct ixgbevf_adapter *adapter, u64 *data,
+			      int reg, u32 mask, u32 write)
+{
+	u32 val, before;
+
+	before = ixgbe_read_reg(&adapter->hw, reg);
+	ixgbe_write_reg(&adapter->hw, reg, write & mask);
+	val = ixgbe_read_reg(&adapter->hw, reg);
+	if ((write & mask) != (val & mask)) {
+		pr_err("set/check reg %04X test failed: got 0x%08X expected 0x%08X\n",
+		       reg, (val & mask), write & mask);
+		*data = reg;
+		ixgbe_write_reg(&adapter->hw, reg, before);
+		return true;
+	}
+	ixgbe_write_reg(&adapter->hw, reg, before);
+	return false;
 }
 
 static int ixgbevf_reg_test(struct ixgbevf_adapter *adapter, u64 *data)
@@ -580,38 +586,47 @@ static int ixgbevf_reg_test(struct ixgbevf_adapter *adapter, u64 *data)
 	 */
 	while (test->reg) {
 		for (i = 0; i < test->array_len; i++) {
+			bool b = false;
+
 			switch (test->test_type) {
 			case PATTERN_TEST:
-				REG_PATTERN_TEST(test->reg + (i * 0x40),
-						test->mask,
-						test->write);
+				b = reg_pattern_test(adapter, data,
+						     test->reg + (i * 0x40),
+						     test->mask,
+						     test->write);
 				break;
 			case SET_READ_TEST:
-				REG_SET_AND_CHECK(test->reg + (i * 0x40),
-						test->mask,
-						test->write);
+				b = reg_set_and_check(adapter, data,
+						      test->reg + (i * 0x40),
+						      test->mask,
+						      test->write);
 				break;
 			case WRITE_NO_TEST:
-				writel(test->write,
-				       (adapter->hw.hw_addr + test->reg)
-				       + (i * 0x40));
+				ixgbe_write_reg(&adapter->hw,
+						  test->reg + (i * 0x40),
+						  test->write);
 				break;
 			case TABLE32_TEST:
-				REG_PATTERN_TEST(test->reg + (i * 4),
-						test->mask,
-						test->write);
+				b = reg_pattern_test(adapter, data,
+						     test->reg + (i * 4),
+						     test->mask,
+						     test->write);
 				break;
 			case TABLE64_TEST_LO:
-				REG_PATTERN_TEST(test->reg + (i * 8),
-						test->mask,
-						test->write);
+				b = reg_pattern_test(adapter, data,
+						     test->reg + (i * 8),
+						     test->mask,
+						     test->write);
 				break;
 			case TABLE64_TEST_HI:
-				REG_PATTERN_TEST((test->reg + 4) + (i * 8),
-						test->mask,
-						test->write);
+				b = reg_pattern_test(adapter, data,
+						     test->reg + 4 + (i * 8),
+						     test->mask,
+						     test->write);
 				break;
 			}
+			if (b)
+				return 1;
 		}
 		test++;
 	}
-- 
cgit v1.2.2


From dbf8b0d891bd3e0436ca17530c372b6b51d6ddab Mon Sep 17 00:00:00 2001
From: Mark Rustad <mark.d.rustad@intel.com>
Date: Tue, 4 Mar 2014 03:02:34 +0000
Subject: ixgbevf: Check register reads for adapter removal

Check all register reads for adapter removal by checking the status
register after any register read that returns 0xFFFFFFFF. Since the
status register will never return 0xFFFFFFFF unless the adapter is
removed, such a value from a status register read confirms the
removal. Since this patch adds so much to ixgbe_read_reg, stop
inlining it, to reduce driver bloat.

Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbevf/ixgbevf.h      |  1 +
 drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 51 +++++++++++++++++++++--
 drivers/net/ethernet/intel/ixgbevf/vf.h           |  9 ++--
 3 files changed, 53 insertions(+), 8 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf.h b/drivers/net/ethernet/intel/ixgbevf/ixgbevf.h
index d4b1f50fb2ad..a08bd7c46766 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf.h
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf.h
@@ -406,6 +406,7 @@ struct ixgbevf_adapter {
 	u64 bp_tx_missed;
 #endif
 
+	u8 __iomem *io_addr; /* Mainly for iounmap use */
 	u32 link_speed;
 	bool link_up;
 
diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
index 74df8bf8619d..37c4ebe97bda 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
@@ -99,6 +99,48 @@ static void ixgbevf_queue_reset_subtask(struct ixgbevf_adapter *adapter);
 static void ixgbevf_set_itr(struct ixgbevf_q_vector *q_vector);
 static void ixgbevf_free_all_rx_resources(struct ixgbevf_adapter *adapter);
 
+static void ixgbevf_remove_adapter(struct ixgbe_hw *hw)
+{
+	struct ixgbevf_adapter *adapter = hw->back;
+
+	if (!hw->hw_addr)
+		return;
+	hw->hw_addr = NULL;
+	dev_err(&adapter->pdev->dev, "Adapter removed\n");
+}
+
+static void ixgbevf_check_remove(struct ixgbe_hw *hw, u32 reg)
+{
+	u32 value;
+
+	/* The following check not only optimizes a bit by not
+	 * performing a read on the status register when the
+	 * register just read was a status register read that
+	 * returned IXGBE_FAILED_READ_REG. It also blocks any
+	 * potential recursion.
+	 */
+	if (reg == IXGBE_VFSTATUS) {
+		ixgbevf_remove_adapter(hw);
+		return;
+	}
+	value = ixgbe_read_reg(hw, IXGBE_VFSTATUS);
+	if (value == IXGBE_FAILED_READ_REG)
+		ixgbevf_remove_adapter(hw);
+}
+
+u32 ixgbe_read_reg(struct ixgbe_hw *hw, u32 reg)
+{
+	u8 __iomem *reg_addr = ACCESS_ONCE(hw->hw_addr);
+	u32 value;
+
+	if (IXGBE_REMOVED(reg_addr))
+		return IXGBE_FAILED_READ_REG;
+	value = readl(reg_addr + reg);
+	if (unlikely(value == IXGBE_FAILED_READ_REG))
+		ixgbevf_check_remove(hw, reg);
+	return value;
+}
+
 static inline void ixgbevf_release_rx_desc(struct ixgbevf_ring *rx_ring,
 					   u32 val)
 {
@@ -1139,7 +1181,7 @@ static void ixgbevf_configure_tx_ring(struct ixgbevf_adapter *adapter,
 	/* reset head and tail pointers */
 	IXGBE_WRITE_REG(hw, IXGBE_VFTDH(reg_idx), 0);
 	IXGBE_WRITE_REG(hw, IXGBE_VFTDT(reg_idx), 0);
-	ring->tail = hw->hw_addr + IXGBE_VFTDT(reg_idx);
+	ring->tail = adapter->io_addr + IXGBE_VFTDT(reg_idx);
 
 	/* reset ntu and ntc to place SW in sync with hardwdare */
 	ring->next_to_clean = 0;
@@ -1318,7 +1360,7 @@ static void ixgbevf_configure_rx_ring(struct ixgbevf_adapter *adapter,
 	/* reset head and tail pointers */
 	IXGBE_WRITE_REG(hw, IXGBE_VFRDH(reg_idx), 0);
 	IXGBE_WRITE_REG(hw, IXGBE_VFRDT(reg_idx), 0);
-	ring->tail = hw->hw_addr + IXGBE_VFRDT(reg_idx);
+	ring->tail = adapter->io_addr + IXGBE_VFRDT(reg_idx);
 
 	/* reset ntu and ntc to place SW in sync with hardwdare */
 	ring->next_to_clean = 0;
@@ -3459,6 +3501,7 @@ static int ixgbevf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	hw->hw_addr = ioremap(pci_resource_start(pdev, 0),
 			      pci_resource_len(pdev, 0));
+	adapter->io_addr = hw->hw_addr;
 	if (!hw->hw_addr) {
 		err = -EIO;
 		goto err_ioremap;
@@ -3544,7 +3587,7 @@ err_register:
 	ixgbevf_clear_interrupt_scheme(adapter);
 err_sw_init:
 	ixgbevf_reset_interrupt_capability(adapter);
-	iounmap(hw->hw_addr);
+	iounmap(adapter->io_addr);
 err_ioremap:
 	free_netdev(netdev);
 err_alloc_etherdev:
@@ -3582,7 +3625,7 @@ static void ixgbevf_remove(struct pci_dev *pdev)
 	ixgbevf_clear_interrupt_scheme(adapter);
 	ixgbevf_reset_interrupt_capability(adapter);
 
-	iounmap(adapter->hw.hw_addr);
+	iounmap(adapter->io_addr);
 	pci_release_regions(pdev);
 
 	hw_dbg(&adapter->hw, "Remove complete\n");
diff --git a/drivers/net/ethernet/intel/ixgbevf/vf.h b/drivers/net/ethernet/intel/ixgbevf/vf.h
index 8ebed729c70f..7cb1a520e561 100644
--- a/drivers/net/ethernet/intel/ixgbevf/vf.h
+++ b/drivers/net/ethernet/intel/ixgbevf/vf.h
@@ -172,16 +172,17 @@ struct ixgbevf_info {
 	const struct ixgbe_mac_operations *mac_ops;
 };
 
+#define IXGBE_FAILED_READ_REG 0xffffffffU
+
+#define IXGBE_REMOVED(a) unlikely(!(a))
+
 static inline void ixgbe_write_reg(struct ixgbe_hw *hw, u32 reg, u32 value)
 {
 	writel(value, hw->hw_addr + reg);
 }
 #define IXGBE_WRITE_REG(h, r, v) ixgbe_write_reg(h, r, v)
 
-static inline u32 ixgbe_read_reg(struct ixgbe_hw *hw, u32 reg)
-{
-	return readl(hw->hw_addr + reg);
-}
+u32 ixgbe_read_reg(struct ixgbe_hw *hw, u32 reg);
 #define IXGBE_READ_REG(h, r) ixgbe_read_reg(h, r)
 
 static inline void ixgbe_write_reg_array(struct ixgbe_hw *hw, u32 reg,
-- 
cgit v1.2.2


From 984b0ee3e3bd1c2d6c955f9121d60bbfd96c399d Mon Sep 17 00:00:00 2001
From: Mark Rustad <mark.d.rustad@intel.com>
Date: Tue, 4 Mar 2014 03:02:40 +0000
Subject: ixgbevf: Check for adapter removal on register writes

Prevent writes to an adapter that has been detected as removed
by a previous failing read.

Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbevf/vf.h | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgbevf/vf.h b/drivers/net/ethernet/intel/ixgbevf/vf.h
index 7cb1a520e561..096d33a59def 100644
--- a/drivers/net/ethernet/intel/ixgbevf/vf.h
+++ b/drivers/net/ethernet/intel/ixgbevf/vf.h
@@ -178,7 +178,11 @@ struct ixgbevf_info {
 
 static inline void ixgbe_write_reg(struct ixgbe_hw *hw, u32 reg, u32 value)
 {
-	writel(value, hw->hw_addr + reg);
+	u8 __iomem *reg_addr = ACCESS_ONCE(hw->hw_addr);
+
+	if (IXGBE_REMOVED(reg_addr))
+		return;
+	writel(value, reg_addr + reg);
 }
 #define IXGBE_WRITE_REG(h, r, v) ixgbe_write_reg(h, r, v)
 
-- 
cgit v1.2.2


From 26597802b47c5b92e3a1e6d5bd7cceef9e611431 Mon Sep 17 00:00:00 2001
From: Mark Rustad <mark.d.rustad@intel.com>
Date: Tue, 4 Mar 2014 03:02:45 +0000
Subject: ixgbevf: Additional adapter removal checks

Additional checks are needed for a detected removal not to cause
problems. Some involve simply avoiding a lot of stuff that can't
do anything good, and also cases where the phony return value can
cause problems. In addition, down the adapter when the removal is
sensed.

Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbevf/ethtool.c      | 22 ++++++++++++++++++++++
 drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 13 +++++++++++++
 2 files changed, 35 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgbevf/ethtool.c b/drivers/net/ethernet/intel/ixgbevf/ethtool.c
index c769a8d364b6..b2d002394e5d 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ethtool.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ethtool.c
@@ -535,6 +535,10 @@ static bool reg_pattern_test(struct ixgbevf_adapter *adapter, u64 *data,
 {
 	u32 pat, val, before;
 
+	if (IXGBE_REMOVED(adapter->hw.hw_addr)) {
+		*data = 1;
+		return true;
+	}
 	for (pat = 0; pat < ARRAY_SIZE(register_test_patterns); pat++) {
 		before = ixgbe_read_reg(&adapter->hw, reg);
 		ixgbe_write_reg(&adapter->hw, reg,
@@ -559,6 +563,10 @@ static bool reg_set_and_check(struct ixgbevf_adapter *adapter, u64 *data,
 {
 	u32 val, before;
 
+	if (IXGBE_REMOVED(adapter->hw.hw_addr)) {
+		*data = 1;
+		return true;
+	}
 	before = ixgbe_read_reg(&adapter->hw, reg);
 	ixgbe_write_reg(&adapter->hw, reg, write & mask);
 	val = ixgbe_read_reg(&adapter->hw, reg);
@@ -578,6 +586,12 @@ static int ixgbevf_reg_test(struct ixgbevf_adapter *adapter, u64 *data)
 	const struct ixgbevf_reg_test *test;
 	u32 i;
 
+	if (IXGBE_REMOVED(adapter->hw.hw_addr)) {
+		dev_err(&adapter->pdev->dev,
+			"Adapter removed - register test blocked\n");
+		*data = 1;
+		return 1;
+	}
 	test = reg_test_vf;
 
 	/*
@@ -641,6 +655,14 @@ static void ixgbevf_diag_test(struct net_device *netdev,
 	struct ixgbevf_adapter *adapter = netdev_priv(netdev);
 	bool if_running = netif_running(netdev);
 
+	if (IXGBE_REMOVED(adapter->hw.hw_addr)) {
+		dev_err(&adapter->pdev->dev,
+			"Adapter removed - test blocked\n");
+		data[0] = 1;
+		data[1] = 1;
+		eth_test->flags |= ETH_TEST_FL_FAILED;
+		return;
+	}
 	set_bit(__IXGBEVF_TESTING, &adapter->state);
 	if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
 		/* Offline tests */
diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
index 37c4ebe97bda..a50e892a5d21 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
@@ -107,6 +107,7 @@ static void ixgbevf_remove_adapter(struct ixgbe_hw *hw)
 		return;
 	hw->hw_addr = NULL;
 	dev_err(&adapter->pdev->dev, "Adapter removed\n");
+	schedule_work(&adapter->watchdog_task);
 }
 
 static void ixgbevf_check_remove(struct ixgbe_hw *hw, u32 reg)
@@ -1301,6 +1302,8 @@ static void ixgbevf_disable_rx_queue(struct ixgbevf_adapter *adapter,
 	u32 rxdctl;
 	u8 reg_idx = ring->reg_idx;
 
+	if (IXGBE_REMOVED(hw->hw_addr))
+		return;
 	rxdctl = IXGBE_READ_REG(hw, IXGBE_VFRXDCTL(reg_idx));
 	rxdctl &= ~IXGBE_RXDCTL_ENABLE;
 
@@ -1326,6 +1329,8 @@ static void ixgbevf_rx_desc_queue_enable(struct ixgbevf_adapter *adapter,
 	u32 rxdctl;
 	u8 reg_idx = ring->reg_idx;
 
+	if (IXGBE_REMOVED(hw->hw_addr))
+		return;
 	do {
 		usleep_range(1000, 2000);
 		rxdctl = IXGBE_READ_REG(hw, IXGBE_VFRXDCTL(reg_idx));
@@ -2399,6 +2404,14 @@ static void ixgbevf_watchdog_task(struct work_struct *work)
 	bool link_up = adapter->link_up;
 	s32 need_reset;
 
+	if (IXGBE_REMOVED(hw->hw_addr)) {
+		if (!test_bit(__IXGBEVF_DOWN, &adapter->state)) {
+			rtnl_lock();
+			ixgbevf_down(adapter);
+			rtnl_unlock();
+		}
+		return;
+	}
 	ixgbevf_queue_reset_subtask(adapter);
 
 	adapter->flags |= IXGBE_FLAG_IN_WATCHDOG_TASK;
-- 
cgit v1.2.2


From 6ab5f7b2981e842e318ff48c708aaaa2a5a6a43e Mon Sep 17 00:00:00 2001
From: Jacob Keller <jacob.e.keller@intel.com>
Date: Sat, 11 Jan 2014 07:20:06 +0000
Subject: igb: implement SIOCGHWTSTAMP ioctl

This patch adds support for the SIOCGHWTSTAMP ioctl which enables user
processes to read the current hwtstamp_config settings
non-destructively. Previously a process had to be privileged and could
only set values, it couldn't return what is currently set without
possibly overwriting the value.

This patch adds support for this new operation into igb by keeping a
shadow copy of the config in the adapter structure, which is returned
upon request.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Matthew Vick <matthew.vick@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/igb/igb.h      |  5 ++--
 drivers/net/ethernet/intel/igb/igb_main.c |  4 ++-
 drivers/net/ethernet/intel/igb/igb_ptp.c  | 46 +++++++++++++++++++++----------
 3 files changed, 38 insertions(+), 17 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/igb/igb.h b/drivers/net/ethernet/intel/igb/igb.h
index a202c9640e93..411b213c63be 100644
--- a/drivers/net/ethernet/intel/igb/igb.h
+++ b/drivers/net/ethernet/intel/igb/igb.h
@@ -434,6 +434,7 @@ struct igb_adapter {
 	struct delayed_work ptp_overflow_work;
 	struct work_struct ptp_tx_work;
 	struct sk_buff *ptp_tx_skb;
+	struct hwtstamp_config tstamp_config;
 	unsigned long ptp_tx_start;
 	unsigned long last_rx_ptp_check;
 	spinlock_t tmreg_lock;
@@ -545,8 +546,8 @@ static inline void igb_ptp_rx_hwtstamp(struct igb_ring *rx_ring,
 	rx_ring->last_rx_timestamp = jiffies;
 }
 
-int igb_ptp_hwtstamp_ioctl(struct net_device *netdev, struct ifreq *ifr,
-			   int cmd);
+int igb_ptp_set_ts_config(struct net_device *netdev, struct ifreq *ifr);
+int igb_ptp_get_ts_config(struct net_device *netdev, struct ifreq *ifr);
 #ifdef CONFIG_IGB_HWMON
 void igb_sysfs_exit(struct igb_adapter *adapter);
 int igb_sysfs_init(struct igb_adapter *adapter);
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 17feea0ea2b0..f623e6ce28c9 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -7162,8 +7162,10 @@ static int igb_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
 	case SIOCGMIIREG:
 	case SIOCSMIIREG:
 		return igb_mii_ioctl(netdev, ifr, cmd);
+	case SIOCGHWTSTAMP:
+		return igb_ptp_get_ts_config(netdev, ifr);
 	case SIOCSHWTSTAMP:
-		return igb_ptp_hwtstamp_ioctl(netdev, ifr, cmd);
+		return igb_ptp_set_ts_config(netdev, ifr);
 	default:
 		return -EOPNOTSUPP;
 	}
diff --git a/drivers/net/ethernet/intel/igb/igb_ptp.c b/drivers/net/ethernet/intel/igb/igb_ptp.c
index a894551ae3c0..da55fbb090b2 100644
--- a/drivers/net/ethernet/intel/igb/igb_ptp.c
+++ b/drivers/net/ethernet/intel/igb/igb_ptp.c
@@ -541,10 +541,26 @@ void igb_ptp_rx_rgtstamp(struct igb_q_vector *q_vector,
 }
 
 /**
- * igb_ptp_hwtstamp_ioctl - control hardware time stamping
+ * igb_ptp_get_ts_config - get hardware time stamping config
+ * @netdev:
+ * @ifreq:
+ *
+ * Get the hwtstamp_config settings to return to the user. Rather than attempt
+ * to deconstruct the settings from the registers, just return a shadow copy
+ * of the last known settings.
+ **/
+int igb_ptp_get_ts_config(struct net_device *netdev, struct ifreq *ifr)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct hwtstamp_config *config = &adapter->tstamp_config;
+
+	return copy_to_user(ifr->ifr_data, config, sizeof(*config)) ?
+		-EFAULT : 0;
+}
+/**
+ * igb_ptp_set_ts_config - control hardware time stamping
  * @netdev:
  * @ifreq:
- * @cmd:
  *
  * Outgoing time stamping can be enabled and disabled. Play nice and
  * disable it when requested, although it shouldn't case any overhead
@@ -558,12 +574,11 @@ void igb_ptp_rx_rgtstamp(struct igb_q_vector *q_vector,
  * not supported, with the exception of "all V2 events regardless of
  * level 2 or 4".
  **/
-int igb_ptp_hwtstamp_ioctl(struct net_device *netdev,
-			   struct ifreq *ifr, int cmd)
+int igb_ptp_set_ts_config(struct net_device *netdev, struct ifreq *ifr)
 {
 	struct igb_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
-	struct hwtstamp_config config;
+	struct hwtstamp_config *config = &adapter->tstamp_config;
 	u32 tsync_tx_ctl = E1000_TSYNCTXCTL_ENABLED;
 	u32 tsync_rx_ctl = E1000_TSYNCRXCTL_ENABLED;
 	u32 tsync_rx_cfg = 0;
@@ -571,14 +586,14 @@ int igb_ptp_hwtstamp_ioctl(struct net_device *netdev,
 	bool is_l2 = false;
 	u32 regval;
 
-	if (copy_from_user(&config, ifr->ifr_data, sizeof(config)))
+	if (copy_from_user(config, ifr->ifr_data, sizeof(*config)))
 		return -EFAULT;
 
 	/* reserved for future extensions */
-	if (config.flags)
+	if (config->flags)
 		return -EINVAL;
 
-	switch (config.tx_type) {
+	switch (config->tx_type) {
 	case HWTSTAMP_TX_OFF:
 		tsync_tx_ctl = 0;
 	case HWTSTAMP_TX_ON:
@@ -587,7 +602,7 @@ int igb_ptp_hwtstamp_ioctl(struct net_device *netdev,
 		return -ERANGE;
 	}
 
-	switch (config.rx_filter) {
+	switch (config->rx_filter) {
 	case HWTSTAMP_FILTER_NONE:
 		tsync_rx_ctl = 0;
 		break;
@@ -611,7 +626,7 @@ int igb_ptp_hwtstamp_ioctl(struct net_device *netdev,
 	case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ:
 	case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ:
 		tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_EVENT_V2;
-		config.rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT;
+		config->rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT;
 		is_l2 = true;
 		is_l4 = true;
 		break;
@@ -622,12 +637,12 @@ int igb_ptp_hwtstamp_ioctl(struct net_device *netdev,
 		 */
 		if (hw->mac.type != e1000_82576) {
 			tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_ALL;
-			config.rx_filter = HWTSTAMP_FILTER_ALL;
+			config->rx_filter = HWTSTAMP_FILTER_ALL;
 			break;
 		}
 		/* fall through */
 	default:
-		config.rx_filter = HWTSTAMP_FILTER_NONE;
+		config->rx_filter = HWTSTAMP_FILTER_NONE;
 		return -ERANGE;
 	}
 
@@ -644,7 +659,7 @@ int igb_ptp_hwtstamp_ioctl(struct net_device *netdev,
 	if ((hw->mac.type >= e1000_82580) && tsync_rx_ctl) {
 		tsync_rx_ctl = E1000_TSYNCRXCTL_ENABLED;
 		tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_ALL;
-		config.rx_filter = HWTSTAMP_FILTER_ALL;
+		config->rx_filter = HWTSTAMP_FILTER_ALL;
 		is_l2 = true;
 		is_l4 = true;
 
@@ -708,7 +723,7 @@ int igb_ptp_hwtstamp_ioctl(struct net_device *netdev,
 	regval = rd32(E1000_RXSTMPL);
 	regval = rd32(E1000_RXSTMPH);
 
-	return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ?
+	return copy_to_user(ifr->ifr_data, config, sizeof(*config)) ?
 		-EFAULT : 0;
 }
 
@@ -865,6 +880,9 @@ void igb_ptp_reset(struct igb_adapter *adapter)
 	if (!(adapter->flags & IGB_FLAG_PTP))
 		return;
 
+	/* reset the tstamp_config */
+	memset(&adapter->tstamp_config, 0, sizeof(adapter->tstamp_config));
+
 	switch (adapter->hw.mac.type) {
 	case e1000_82576:
 		/* Dial the nominal frequency. */
-- 
cgit v1.2.2


From 22a8b2915998a5f35f659c1d419bd4bcbb1b6f41 Mon Sep 17 00:00:00 2001
From: "Fujinaka, Todd" <todd.fujinaka@intel.com>
Date: Thu, 13 Mar 2014 04:29:01 +0000
Subject: igb: add register rd/wr for surprise removal

Add initial register rd/wr for surprise removal (LER).

Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/igb/e1000_regs.h | 21 ++++++++++++++++++---
 drivers/net/ethernet/intel/igb/igb_main.c   | 22 ++++++++++++++++++++++
 2 files changed, 40 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/igb/e1000_regs.h b/drivers/net/ethernet/intel/igb/e1000_regs.h
index d0f14be3d94f..bdb246e848e1 100644
--- a/drivers/net/ethernet/intel/igb/e1000_regs.h
+++ b/drivers/net/ethernet/intel/igb/e1000_regs.h
@@ -362,12 +362,25 @@
                                                        * Filter - RW */
 #define E1000_VMVIR(_n)        (0x03700 + (4 * (_n)))
 
-#define wr32(reg, value) (writel(value, hw->hw_addr + reg))
-#define rd32(reg) (readl(hw->hw_addr + reg))
+struct e1000_hw;
+
+u32 igb_rd32(struct e1000_hw *hw, u32 reg);
+
+/* write operations, indexed using DWORDS */
+#define wr32(reg, val) \
+do { \
+	u8 __iomem *hw_addr = ACCESS_ONCE((hw)->hw_addr); \
+	if (!E1000_REMOVED(hw_addr)) \
+		writel((val), &hw_addr[(reg)]); \
+} while (0)
+
+#define rd32(reg) (igb_rd32(hw, reg))
+
 #define wrfl() ((void)rd32(E1000_STATUS))
 
 #define array_wr32(reg, offset, value) \
-	(writel(value, hw->hw_addr + reg + ((offset) << 2)))
+	wr32((reg) + ((offset) << 2), (value))
+
 #define array_rd32(reg, offset) \
 	(readl(hw->hw_addr + reg + ((offset) << 2)))
 
@@ -406,4 +419,6 @@
 #define E1000_INVM_DATA_REG(_n)	(0x12120 + 4*(_n))
 #define E1000_INVM_SIZE		64 /* Number of INVM Data Registers */
 
+#define E1000_REMOVED(h) unlikely(!(h))
+
 #endif
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index f623e6ce28c9..e8b4f7b3f03f 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -751,6 +751,28 @@ static void igb_cache_ring_register(struct igb_adapter *adapter)
 	}
 }
 
+u32 igb_rd32(struct e1000_hw *hw, u32 reg)
+{
+	struct igb_adapter *igb = container_of(hw, struct igb_adapter, hw);
+	u8 __iomem *hw_addr = ACCESS_ONCE(hw->hw_addr);
+	u32 value = 0;
+
+	if (E1000_REMOVED(hw_addr))
+		return ~value;
+
+	value = readl(&hw_addr[reg]);
+
+	/* reads should not return all F's */
+	if (!(~value) && (!reg || !(~readl(hw_addr)))) {
+		struct net_device *netdev = igb->netdev;
+		hw->hw_addr = NULL;
+		netif_device_detach(netdev);
+		netdev_err(netdev, "PCIe link lost, device now detached\n");
+	}
+
+	return value;
+}
+
 /**
  *  igb_write_ivar - configure ivar for given MSI-X vector
  *  @hw: pointer to the HW structure
-- 
cgit v1.2.2


From db41b87db93e1ef28b6e9c4035f1cdc17e2eceb2 Mon Sep 17 00:00:00 2001
From: Christian Engelmayer <cengelma@gmx.at>
Date: Fri, 21 Mar 2014 03:25:30 -0700
Subject: igb: Fix memory leak in igb_get_module_eeprom()

Fix a memory leak in the igb_get_module_eeprom() error handling path.
Detected by Coverity: CID 1016508.

Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/igb/igb_ethtool.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c
index e35bc1faa452..d5c3e6572f2f 100644
--- a/drivers/net/ethernet/intel/igb/igb_ethtool.c
+++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c
@@ -2791,9 +2791,11 @@ static int igb_get_module_eeprom(struct net_device *netdev,
 	/* Read EEPROM block, SFF-8079/SFF-8472, word at a time */
 	for (i = 0; i < last_word - first_word + 1; i++) {
 		status = igb_read_phy_reg_i2c(hw, first_word + i, &dataword[i]);
-		if (status != E1000_SUCCESS)
+		if (status != E1000_SUCCESS) {
 			/* Error occurred while reading module */
+			kfree(dataword);
 			return -EIO;
+		}
 
 		be16_to_cpus(&dataword[i]);
 	}
-- 
cgit v1.2.2


From 0f49da0e78f445d7a7e3e566ae4871c9428b0448 Mon Sep 17 00:00:00 2001
From: Ken ICHIKAWA <ichikawa.ken@jp.fujitsu.com>
Date: Fri, 21 Mar 2014 03:37:24 -0700
Subject: igb: specify phc_index of 82575 for get_ts_info

82575 has only software timestamping capability and it has
no PTP Hardware Clocks. Therefore, -1 has to be specified
to the phc_index for ethtool's get_ts_info, otherwise a wrong
value will be set to the phc_index.

v2: move the if (adapter->ptp_clock) section specifying phc_index
    to above the switch statement as suggested by Matthew Vick.
    adapter->ptpclock will always be NULL for 82575.

Signed-off-by: Ken ICHIKAWA <ichikawa.ken@jp.fujitsu.com>
Acked-by: Matthew Vick <matthew.vick@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/igb/igb_ethtool.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c
index d5c3e6572f2f..e5570acbeea8 100644
--- a/drivers/net/ethernet/intel/igb/igb_ethtool.c
+++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c
@@ -2353,6 +2353,11 @@ static int igb_get_ts_info(struct net_device *dev,
 {
 	struct igb_adapter *adapter = netdev_priv(dev);
 
+	if (adapter->ptp_clock)
+		info->phc_index = ptp_clock_index(adapter->ptp_clock);
+	else
+		info->phc_index = -1;
+
 	switch (adapter->hw.mac.type) {
 	case e1000_82575:
 		info->so_timestamping =
@@ -2374,11 +2379,6 @@ static int igb_get_ts_info(struct net_device *dev,
 			SOF_TIMESTAMPING_RX_HARDWARE |
 			SOF_TIMESTAMPING_RAW_HARDWARE;
 
-		if (adapter->ptp_clock)
-			info->phc_index = ptp_clock_index(adapter->ptp_clock);
-		else
-			info->phc_index = -1;
-
 		info->tx_types =
 			(1 << HWTSTAMP_TX_OFF) |
 			(1 << HWTSTAMP_TX_ON);
-- 
cgit v1.2.2


From cb06d102327eadcd1bdc480bfd9f8876251d1007 Mon Sep 17 00:00:00 2001
From: Christoph Paasch <christoph.paasch@uclouvain.be>
Date: Fri, 21 Mar 2014 03:48:19 -0700
Subject: igb: Fix Null-pointer dereference in igb_reset_q_vector

When igb_set_interrupt_capability() calls
igb_reset_interrupt_capability() (e.g., because CONFIG_PCI_MSI is unset),
num_q_vectors has been set but no vector has yet been allocated.

igb_reset_interrupt_capability() will then call igb_reset_q_vector,
which assumes that the vector is allocated. As this is not the case, we
are accessing a NULL-pointer.

This patch fixes it by checking that q_vector is indeed different from
NULL.

Fixes: 02ef6e1d0b0023 (igb: Fix queue allocation method to accommodate changing during runtime)
Cc: Carolyn Wyborny <carolyn.wyborny@intel.com>
Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/igb/igb_main.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index e8b4f7b3f03f..6acf7873d733 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -1035,6 +1035,12 @@ static void igb_reset_q_vector(struct igb_adapter *adapter, int v_idx)
 {
 	struct igb_q_vector *q_vector = adapter->q_vector[v_idx];
 
+	/* Coming from igb_set_interrupt_capability, the vectors are not yet
+	 * allocated. So, q_vector is NULL so we should stop here.
+	 */
+	if (!q_vector)
+		return;
+
 	if (q_vector->tx.ring)
 		adapter->tx_ring[q_vector->tx.ring->queue_index] = NULL;
 
-- 
cgit v1.2.2


From b709323d2477614823a38c2f2a9a206e087e28fc Mon Sep 17 00:00:00 2001
From: Christoph Paasch <christoph.paasch@uclouvain.be>
Date: Fri, 21 Mar 2014 04:02:09 -0700
Subject: igb: Unset IGB_FLAG_HAS_MSIX-flag when falling back to msi-only

Prior to cd14ef54d25 (igb: Change to use statically allocated array for
MSIx entries), having msix_entries different from NULL was an indicator
that MSIX is enabled.
In igb_set_interrupt_capabiliy we may fall back to MSI-only. Prior to
the above patch msix_entries was set to NULL by
igb_reset_interrupt_capability.

However, now we are checking the flag for IGB_FLAG_HAS_MSIX and so the
stack gets completly confused:

[   42.659791] ------------[ cut here ]------------
[   42.715032] WARNING: CPU: 7 PID: 0 at net/sched/sch_generic.c:264 dev_watchdog+0x15c/0x1fb()
[   42.848263] NETDEV WATCHDOG: eth0 (igb): transmit queue 0 timed out
[   42.923253] Modules linked in:
[   42.959875] CPU: 7 PID: 0 Comm: swapper/7 Not tainted 3.14.0-rc2-mptcp #437
[   43.043184] Hardware name: HP ProLiant DL165 G7, BIOS O37 01/26/2011
[   43.119215]  0000000000000108 ffff88023fdc3da8 ffffffff81487847 0000000000000108
[   43.208165]  ffff88023fdc3df8 ffff88023fdc3de8 ffffffff81034e7d ffff88023fdc3dd8
[   43.297120]  ffffffff813fff10 ffff880236018000 ffff880236b178c0 0000000000000008
[   43.386071] Call Trace:
[   43.415303]  <IRQ>  [<ffffffff81487847>] dump_stack+0x49/0x62
[   43.484174]  [<ffffffff81034e7d>] warn_slowpath_common+0x77/0x91
[   43.556049]  [<ffffffff813fff10>] ? dev_watchdog+0x15c/0x1fb
[   43.623759]  [<ffffffff81034f2b>] warn_slowpath_fmt+0x41/0x43
[   43.692511]  [<ffffffff813fff10>] dev_watchdog+0x15c/0x1fb
[   43.758141]  [<ffffffff813ffdb4>] ? __netdev_watchdog_up+0x64/0x64
[   43.832091]  [<ffffffff8103cd04>] call_timer_fn+0x17/0x6f
[   43.896682]  [<ffffffff8103cebe>] run_timer_softirq+0x162/0x1a2
[   43.967511]  [<ffffffff81038520>] __do_softirq+0xcd/0x1cc
[   44.032104]  [<ffffffff81038689>] irq_exit+0x3a/0x48
[   44.091492]  [<ffffffff81026d43>] smp_apic_timer_interrupt+0x43/0x50
[   44.167525]  [<ffffffff8148c24a>] apic_timer_interrupt+0x6a/0x70
[   44.239392]  <EOI>  [<ffffffff8100992c>] ? default_idle+0x6/0x8
[   44.310343]  [<ffffffff81009b31>] arch_cpu_idle+0x13/0x18
[   44.374934]  [<ffffffff81066126>] cpu_startup_entry+0xa7/0x101
[   44.444724]  [<ffffffff81025660>] start_secondary+0x1b2/0x1b7
[   44.513472] ---[ end trace a5a075fd4e7f854f ]---
[   44.568753] igb 0000:04:00.0 eth0: Reset adapter
[   46.206945] random: nonblocking pool is initialized
[   46.465670] irq 44: nobody cared (try booting with the "irqpoll" option)
[   46.545862] CPU: 7 PID: 0 Comm: swapper/7 Tainted: G        W    3.14.0-rc2-mptcp #437
[   46.640610] Hardware name: HP ProLiant DL165 G7, BIOS O37 01/26/2011
[   46.716641]  ffff8802363f8c84 ffff88023fdc3e38 ffffffff81487847 00000000a03cdb6d
[   46.805598]  ffff8802363f8c00 ffff88023fdc3e68 ffffffff81068489 0000007f81825400
[   46.894539]  ffff8802363f8c00 0000000000000000 0000000000000000 ffff88023fdc3ea8
[   46.983484] Call Trace:
[   47.012714]  <IRQ>  [<ffffffff81487847>] dump_stack+0x49/0x62
[   47.081585]  [<ffffffff81068489>] __report_bad_irq+0x35/0xc1
[   47.149295]  [<ffffffff81068683>] note_interrupt+0x16e/0x1ea
[   47.217006]  [<ffffffff8106679e>] handle_irq_event_percpu+0x116/0x12e
[   47.294075]  [<ffffffff810667e9>] handle_irq_event+0x33/0x4f
[   47.361787]  [<ffffffff81068c95>] handle_fasteoi_irq+0x83/0xd1
[   47.431577]  [<ffffffff81003d5b>] handle_irq+0x1f/0x28
[   47.493047]  [<ffffffff81003567>] do_IRQ+0x4e/0xd4
[   47.550358]  [<ffffffff8148b06a>] common_interrupt+0x6a/0x6a
[   47.618066]  <EOI>  [<ffffffff8100992c>] ? default_idle+0x6/0x8
[   47.689016]  [<ffffffff81009b31>] arch_cpu_idle+0x13/0x18
[   47.753605]  [<ffffffff81066126>] cpu_startup_entry+0xa7/0x101
[   47.823397]  [<ffffffff81025660>] start_secondary+0x1b2/0x1b7
[   47.892146] handlers:
[   47.919301] [<ffffffff812fbd7d>] igb_intr

So, this patch unsets the flag to indicate that we are not using MSIX.
This patch does exactly this: Unsetting the flag when falling back to MSI.

Fixes: cd14ef54d25b (igb: Change to use statically allocated array for MSIx entries)
Cc: Carolyn Wyborny <carolyn.wyborny@intel.com>
Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/igb/igb_main.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 6acf7873d733..cd20409858d1 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -1149,6 +1149,7 @@ static void igb_set_interrupt_capability(struct igb_adapter *adapter, bool msix)
 
 	/* If we can't do MSI-X, try MSI */
 msi_only:
+	adapter->flags &= ~IGB_FLAG_HAS_MSIX;
 #ifdef CONFIG_PCI_IOV
 	/* disable SR-IOV for non MSI-X configurations */
 	if (adapter->vf_data) {
-- 
cgit v1.2.2


From 4986b4f008c45cf846dfe76a4602b4a7b027650c Mon Sep 17 00:00:00 2001
From: Richard Cochran <richardcochran@gmail.com>
Date: Thu, 20 Mar 2014 22:21:55 +0100
Subject: ptp: drivers: set the number of programmable pins.

This patch updates the many PTP Hardware Clock drivers with the
newly introduced field that advertises the number of programmable
pins. Some of these devices do have programmable pins, but the
implementation will have to wait for follow on patches.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/adi/bfin_mac.c              | 1 +
 drivers/net/ethernet/broadcom/tg3.c              | 1 +
 drivers/net/ethernet/freescale/fec_ptp.c         | 1 +
 drivers/net/ethernet/freescale/gianfar_ptp.c     | 1 +
 drivers/net/ethernet/intel/e1000e/ptp.c          | 1 +
 drivers/net/ethernet/mellanox/mlx4/en_clock.c    | 1 +
 drivers/net/ethernet/sfc/ptp.c                   | 1 +
 drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c | 1 +
 drivers/net/ethernet/ti/cpts.c                   | 1 +
 drivers/net/ethernet/tile/tilegx.c               | 1 +
 10 files changed, 10 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/adi/bfin_mac.c b/drivers/net/ethernet/adi/bfin_mac.c
index c0f68dcd1dc1..83a8cdbcd936 100644
--- a/drivers/net/ethernet/adi/bfin_mac.c
+++ b/drivers/net/ethernet/adi/bfin_mac.c
@@ -1040,6 +1040,7 @@ static struct ptp_clock_info bfin_ptp_caps = {
 	.n_alarm	= 0,
 	.n_ext_ts	= 0,
 	.n_per_out	= 0,
+	.n_pins		= 0,
 	.pps		= 0,
 	.adjfreq	= bfin_ptp_adjfreq,
 	.adjtime	= bfin_ptp_adjtime,
diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index bbbd2a4bc161..37422af9ef13 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -6322,6 +6322,7 @@ static const struct ptp_clock_info tg3_ptp_caps = {
 	.n_alarm	= 0,
 	.n_ext_ts	= 0,
 	.n_per_out	= 1,
+	.n_pins		= 0,
 	.pps		= 0,
 	.adjfreq	= tg3_ptp_adjfreq,
 	.adjtime	= tg3_ptp_adjtime,
diff --git a/drivers/net/ethernet/freescale/fec_ptp.c b/drivers/net/ethernet/freescale/fec_ptp.c
index 89ccb5b08708..82386b29914a 100644
--- a/drivers/net/ethernet/freescale/fec_ptp.c
+++ b/drivers/net/ethernet/freescale/fec_ptp.c
@@ -372,6 +372,7 @@ void fec_ptp_init(struct platform_device *pdev)
 	fep->ptp_caps.n_alarm = 0;
 	fep->ptp_caps.n_ext_ts = 0;
 	fep->ptp_caps.n_per_out = 0;
+	fep->ptp_caps.n_pins = 0;
 	fep->ptp_caps.pps = 0;
 	fep->ptp_caps.adjfreq = fec_ptp_adjfreq;
 	fep->ptp_caps.adjtime = fec_ptp_adjtime;
diff --git a/drivers/net/ethernet/freescale/gianfar_ptp.c b/drivers/net/ethernet/freescale/gianfar_ptp.c
index abc28da27042..bb568006f37d 100644
--- a/drivers/net/ethernet/freescale/gianfar_ptp.c
+++ b/drivers/net/ethernet/freescale/gianfar_ptp.c
@@ -414,6 +414,7 @@ static struct ptp_clock_info ptp_gianfar_caps = {
 	.n_alarm	= 0,
 	.n_ext_ts	= N_EXT_TS,
 	.n_per_out	= 0,
+	.n_pins		= 0,
 	.pps		= 1,
 	.adjfreq	= ptp_gianfar_adjfreq,
 	.adjtime	= ptp_gianfar_adjtime,
diff --git a/drivers/net/ethernet/intel/e1000e/ptp.c b/drivers/net/ethernet/intel/e1000e/ptp.c
index 3bd79a3ff829..fb1a914a3ad4 100644
--- a/drivers/net/ethernet/intel/e1000e/ptp.c
+++ b/drivers/net/ethernet/intel/e1000e/ptp.c
@@ -189,6 +189,7 @@ static const struct ptp_clock_info e1000e_ptp_clock_info = {
 	.n_alarm	= 0,
 	.n_ext_ts	= 0,
 	.n_per_out	= 0,
+	.n_pins		= 0,
 	.pps		= 0,
 	.adjfreq	= e1000e_phc_adjfreq,
 	.adjtime	= e1000e_phc_adjtime,
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_clock.c b/drivers/net/ethernet/mellanox/mlx4/en_clock.c
index abaf6bb22416..57dda95b67d8 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_clock.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_clock.c
@@ -276,6 +276,7 @@ static const struct ptp_clock_info mlx4_en_ptp_clock_info = {
 	.n_alarm	= 0,
 	.n_ext_ts	= 0,
 	.n_per_out	= 0,
+	.n_pins		= 0,
 	.pps		= 0,
 	.adjfreq	= mlx4_en_phc_adjfreq,
 	.adjtime	= mlx4_en_phc_adjtime,
diff --git a/drivers/net/ethernet/sfc/ptp.c b/drivers/net/ethernet/sfc/ptp.c
index 722344fcd155..6b861e3de4b0 100644
--- a/drivers/net/ethernet/sfc/ptp.c
+++ b/drivers/net/ethernet/sfc/ptp.c
@@ -1194,6 +1194,7 @@ static const struct ptp_clock_info efx_phc_clock_info = {
 	.n_alarm	= 0,
 	.n_ext_ts	= 0,
 	.n_per_out	= 0,
+	.n_pins		= 0,
 	.pps		= 1,
 	.adjfreq	= efx_phc_adjfreq,
 	.adjtime	= efx_phc_adjtime,
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
index 7680581ebe12..b7ad3565566c 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
@@ -164,6 +164,7 @@ static struct ptp_clock_info stmmac_ptp_clock_ops = {
 	.n_alarm = 0,
 	.n_ext_ts = 0,
 	.n_per_out = 0,
+	.n_pins = 0,
 	.pps = 0,
 	.adjfreq = stmmac_adjust_freq,
 	.adjtime = stmmac_adjust_time,
diff --git a/drivers/net/ethernet/ti/cpts.c b/drivers/net/ethernet/ti/cpts.c
index 8c351f100aca..372cb192c5aa 100644
--- a/drivers/net/ethernet/ti/cpts.c
+++ b/drivers/net/ethernet/ti/cpts.c
@@ -217,6 +217,7 @@ static struct ptp_clock_info cpts_info = {
 	.name		= "CTPS timer",
 	.max_adj	= 1000000,
 	.n_ext_ts	= 0,
+	.n_pins		= 0,
 	.pps		= 0,
 	.adjfreq	= cpts_ptp_adjfreq,
 	.adjtime	= cpts_ptp_adjtime,
diff --git a/drivers/net/ethernet/tile/tilegx.c b/drivers/net/ethernet/tile/tilegx.c
index b43f1b3b9632..7e1c91d41a87 100644
--- a/drivers/net/ethernet/tile/tilegx.c
+++ b/drivers/net/ethernet/tile/tilegx.c
@@ -873,6 +873,7 @@ static struct ptp_clock_info ptp_mpipe_caps = {
 	.name		= "mPIPE clock",
 	.max_adj	= 999999999,
 	.n_ext_ts	= 0,
+	.n_pins		= 0,
 	.pps		= 0,
 	.adjfreq	= ptp_mpipe_adjfreq,
 	.adjtime	= ptp_mpipe_adjtime,
-- 
cgit v1.2.2


From fbf4b9349f8b830ce5ff11c5804bdfa8b1176a7e Mon Sep 17 00:00:00 2001
From: Richard Cochran <richardcochran@gmail.com>
Date: Thu, 20 Mar 2014 22:21:56 +0100
Subject: dp83640: trivial fixes

This patch cleans up the input checking code on the external time stamp
function by using an unsigned rather than a signed channel index.

Also, this patch corrects the author's email address. When this macro
was last changed, the top level domain part of the email address was
left behind.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/dp83640.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c
index 98e7cbf720a5..d6c106113932 100644
--- a/drivers/net/phy/dp83640.c
+++ b/drivers/net/phy/dp83640.c
@@ -424,13 +424,13 @@ static int ptp_dp83640_enable(struct ptp_clock_info *ptp,
 	struct dp83640_clock *clock =
 		container_of(ptp, struct dp83640_clock, caps);
 	struct phy_device *phydev = clock->chosen->phydev;
-	int index;
+	unsigned int index;
 	u16 evnt, event_num, gpio_num;
 
 	switch (rq->type) {
 	case PTP_CLK_REQ_EXTTS:
 		index = rq->extts.index;
-		if (index < 0 || index >= N_EXT_TS)
+		if (index >= N_EXT_TS)
 			return -EINVAL;
 		event_num = EXT_EVENT + index;
 		evnt = EVNT_WR | (event_num & EVNT_SEL_MASK) << EVNT_SEL_SHIFT;
@@ -1363,7 +1363,7 @@ static void __exit dp83640_exit(void)
 }
 
 MODULE_DESCRIPTION("National Semiconductor DP83640 PHY driver");
-MODULE_AUTHOR("Richard Cochran <richardcochran@gmail.at>");
+MODULE_AUTHOR("Richard Cochran <richardcochran@gmail.com>");
 MODULE_LICENSE("GPL");
 
 module_init(dp83640_init);
-- 
cgit v1.2.2


From 564ca56e45469f48703b1de72ac64d143d18d0ee Mon Sep 17 00:00:00 2001
From: Richard Cochran <richardcochran@gmail.com>
Date: Thu, 20 Mar 2014 22:21:57 +0100
Subject: dp83640: correct the periodic output frequency

The phyter driver incorrectly feeds the value of the period into what
is in fact a pulse width register, resulting in the actual period
being twice the dialed value. This patch fixes the issue and renames a
variable to make the code at bit more clear.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/dp83640.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c
index d6c106113932..9e265553e8e4 100644
--- a/drivers/net/phy/dp83640.c
+++ b/drivers/net/phy/dp83640.c
@@ -271,7 +271,7 @@ static void periodic_output(struct dp83640_clock *clock,
 {
 	struct dp83640_private *dp83640 = clock->chosen;
 	struct phy_device *phydev = dp83640->phydev;
-	u32 sec, nsec, period;
+	u32 sec, nsec, pwidth;
 	u16 gpio, ptp_trig, trigger, val;
 
 	gpio = on ? gpio_tab[PEROUT_GPIO] : 0;
@@ -296,8 +296,9 @@ static void periodic_output(struct dp83640_clock *clock,
 
 	sec = clkreq->perout.start.sec;
 	nsec = clkreq->perout.start.nsec;
-	period = clkreq->perout.period.sec * 1000000000UL;
-	period += clkreq->perout.period.nsec;
+	pwidth = clkreq->perout.period.sec * 1000000000UL;
+	pwidth += clkreq->perout.period.nsec;
+	pwidth /= 2;
 
 	mutex_lock(&clock->extreg_lock);
 
@@ -310,8 +311,8 @@ static void periodic_output(struct dp83640_clock *clock,
 	ext_write(0, phydev, PAGE4, PTP_TDR, nsec >> 16);      /* ns[31:16] */
 	ext_write(0, phydev, PAGE4, PTP_TDR, sec & 0xffff);    /* sec[15:0] */
 	ext_write(0, phydev, PAGE4, PTP_TDR, sec >> 16);       /* sec[31:16] */
-	ext_write(0, phydev, PAGE4, PTP_TDR, period & 0xffff); /* ns[15:0] */
-	ext_write(0, phydev, PAGE4, PTP_TDR, period >> 16);    /* ns[31:16] */
+	ext_write(0, phydev, PAGE4, PTP_TDR, pwidth & 0xffff); /* ns[15:0] */
+	ext_write(0, phydev, PAGE4, PTP_TDR, pwidth >> 16);    /* ns[31:16] */
 
 	/*enable trigger*/
 	val &= ~TRIG_LOAD;
-- 
cgit v1.2.2


From 86dd3612e1e0ffdfafa15021581bb45419d479b9 Mon Sep 17 00:00:00 2001
From: Richard Cochran <richardcochran@gmail.com>
Date: Thu, 20 Mar 2014 22:21:58 +0100
Subject: dp83640: implement programmable pin functions.

This patch adapts the dp83640 driver to allow reconfiguration of which
auxiliary function goes on which pin. The functions may be reassigned
freely with the one exception of the calibration function.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/dp83640.c | 52 +++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 52 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c
index 9e265553e8e4..43b583b2bed7 100644
--- a/drivers/net/phy/dp83640.c
+++ b/drivers/net/phy/dp83640.c
@@ -47,6 +47,7 @@
 #define CAL_EVENT	7
 #define CAL_TRIGGER	7
 #define PER_TRIGGER	6
+#define DP83640_N_PINS	12
 
 #define MII_DP83640_MICR 0x11
 #define MII_DP83640_MISR 0x12
@@ -173,6 +174,37 @@ MODULE_PARM_DESC(chosen_phy, \
 MODULE_PARM_DESC(gpio_tab, \
 	"Which GPIO line to use for which purpose: cal,perout,extts1,...,extts6");
 
+static void dp83640_gpio_defaults(struct ptp_pin_desc *pd)
+{
+	int i, index;
+
+	for (i = 0; i < DP83640_N_PINS; i++) {
+		snprintf(pd[i].name, sizeof(pd[i].name), "GPIO%d", 1 + i);
+		pd[i].index = i;
+	}
+
+	for (i = 0; i < GPIO_TABLE_SIZE; i++) {
+		if (gpio_tab[i] < 1 || gpio_tab[i] > DP83640_N_PINS) {
+			pr_err("gpio_tab[%d]=%hu out of range", i, gpio_tab[i]);
+			return;
+		}
+	}
+
+	index = gpio_tab[CALIBRATE_GPIO] - 1;
+	pd[index].func = PTP_PF_PHYSYNC;
+	pd[index].chan = 0;
+
+	index = gpio_tab[PEROUT_GPIO] - 1;
+	pd[index].func = PTP_PF_PEROUT;
+	pd[index].chan = 0;
+
+	for (i = EXTTS0_GPIO; i < GPIO_TABLE_SIZE; i++) {
+		index = gpio_tab[i] - 1;
+		pd[index].func = PTP_PF_EXTTS;
+		pd[index].chan = i - EXTTS0_GPIO;
+	}
+}
+
 /* a list of clocks and a mutex to protect it */
 static LIST_HEAD(phyter_clocks);
 static DEFINE_MUTEX(phyter_clocks_lock);
@@ -459,6 +491,12 @@ static int ptp_dp83640_enable(struct ptp_clock_info *ptp,
 	return -EOPNOTSUPP;
 }
 
+static int ptp_dp83640_verify(struct ptp_clock_info *ptp, unsigned int pin,
+			      enum ptp_pin_function func, unsigned int chan)
+{
+	return 0;
+}
+
 static u8 status_frame_dst[6] = { 0x01, 0x1B, 0x19, 0x00, 0x00, 0x00 };
 static u8 status_frame_src[6] = { 0x08, 0x00, 0x17, 0x0B, 0x6B, 0x0F };
 
@@ -876,6 +914,7 @@ static void dp83640_free_clocks(void)
 		mutex_destroy(&clock->extreg_lock);
 		mutex_destroy(&clock->clock_lock);
 		put_device(&clock->bus->dev);
+		kfree(clock->caps.pin_config);
 		kfree(clock);
 	}
 
@@ -895,12 +934,18 @@ static void dp83640_clock_init(struct dp83640_clock *clock, struct mii_bus *bus)
 	clock->caps.n_alarm	= 0;
 	clock->caps.n_ext_ts	= N_EXT_TS;
 	clock->caps.n_per_out	= 1;
+	clock->caps.n_pins	= DP83640_N_PINS;
 	clock->caps.pps		= 0;
 	clock->caps.adjfreq	= ptp_dp83640_adjfreq;
 	clock->caps.adjtime	= ptp_dp83640_adjtime;
 	clock->caps.gettime	= ptp_dp83640_gettime;
 	clock->caps.settime	= ptp_dp83640_settime;
 	clock->caps.enable	= ptp_dp83640_enable;
+	clock->caps.verify	= ptp_dp83640_verify;
+	/*
+	 * Convert the module param defaults into a dynamic pin configuration.
+	 */
+	dp83640_gpio_defaults(clock->caps.pin_config);
 	/*
 	 * Get a reference to this bus instance.
 	 */
@@ -951,6 +996,13 @@ static struct dp83640_clock *dp83640_clock_get_bus(struct mii_bus *bus)
 	if (!clock)
 		goto out;
 
+	clock->caps.pin_config = kzalloc(sizeof(struct ptp_pin_desc) *
+					 DP83640_N_PINS, GFP_KERNEL);
+	if (!clock->caps.pin_config) {
+		kfree(clock);
+		clock = NULL;
+		goto out;
+	}
 	dp83640_clock_init(clock, bus);
 	list_add_tail(&phyter_clocks, &clock->list);
 out:
-- 
cgit v1.2.2


From faa8971607322d9244b3c15799f02ae533769bf8 Mon Sep 17 00:00:00 2001
From: Richard Cochran <richardcochran@gmail.com>
Date: Thu, 20 Mar 2014 22:21:59 +0100
Subject: dp83640: let external input pins from the module parameters be
 defaults.

This patch changes the driver to use the new pin configuration method when
programming the external time stamp input signals.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/dp83640.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c
index 43b583b2bed7..93db56438915 100644
--- a/drivers/net/phy/dp83640.c
+++ b/drivers/net/phy/dp83640.c
@@ -468,7 +468,10 @@ static int ptp_dp83640_enable(struct ptp_clock_info *ptp,
 		event_num = EXT_EVENT + index;
 		evnt = EVNT_WR | (event_num & EVNT_SEL_MASK) << EVNT_SEL_SHIFT;
 		if (on) {
-			gpio_num = gpio_tab[EXTTS0_GPIO + index];
+			gpio_num = 1 + ptp_find_pin(clock->ptp_clock,
+						    PTP_PF_EXTTS, index);
+			if (gpio_num < 1)
+				return -EINVAL;
 			evnt |= (gpio_num & EVNT_GPIO_MASK) << EVNT_GPIO_SHIFT;
 			if (rq->extts.flags & PTP_FALLING_EDGE)
 				evnt |= EVNT_FALL;
-- 
cgit v1.2.2


From 621bdeccdcc71ddb54591107080059ba67f2fcaf Mon Sep 17 00:00:00 2001
From: Richard Cochran <richardcochran@gmail.com>
Date: Thu, 20 Mar 2014 22:22:00 +0100
Subject: dp83640: let the periodic pin from the module parameter be a default.

This patch changes the driver use the new pin configuration method when
programming the periodic output signal.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/dp83640.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c
index 93db56438915..352c5e45fe9c 100644
--- a/drivers/net/phy/dp83640.c
+++ b/drivers/net/phy/dp83640.c
@@ -298,15 +298,22 @@ static u64 phy2txts(struct phy_txts *p)
 	return ns;
 }
 
-static void periodic_output(struct dp83640_clock *clock,
-			    struct ptp_clock_request *clkreq, bool on)
+static int periodic_output(struct dp83640_clock *clock,
+			   struct ptp_clock_request *clkreq, bool on)
 {
 	struct dp83640_private *dp83640 = clock->chosen;
 	struct phy_device *phydev = dp83640->phydev;
 	u32 sec, nsec, pwidth;
 	u16 gpio, ptp_trig, trigger, val;
 
-	gpio = on ? gpio_tab[PEROUT_GPIO] : 0;
+	if (on) {
+		gpio = 1 + ptp_find_pin(clock->ptp_clock, PTP_PF_PEROUT, 0);
+		if (gpio < 1)
+			return -EINVAL;
+	} else {
+		gpio = 0;
+	}
+
 	trigger = PER_TRIGGER;
 
 	ptp_trig = TRIG_WR |
@@ -323,7 +330,7 @@ static void periodic_output(struct dp83640_clock *clock,
 		ext_write(0, phydev, PAGE5, PTP_TRIG, ptp_trig);
 		ext_write(0, phydev, PAGE4, PTP_CTL, val);
 		mutex_unlock(&clock->extreg_lock);
-		return;
+		return 0;
 	}
 
 	sec = clkreq->perout.start.sec;
@@ -352,6 +359,7 @@ static void periodic_output(struct dp83640_clock *clock,
 	ext_write(0, phydev, PAGE4, PTP_CTL, val);
 
 	mutex_unlock(&clock->extreg_lock);
+	return 0;
 }
 
 /* ptp clock methods */
@@ -484,8 +492,7 @@ static int ptp_dp83640_enable(struct ptp_clock_info *ptp,
 	case PTP_CLK_REQ_PEROUT:
 		if (rq->perout.index != 0)
 			return -EINVAL;
-		periodic_output(clock, rq, on);
-		return 0;
+		return periodic_output(clock, rq, on);
 
 	default:
 		break;
-- 
cgit v1.2.2


From c65d7533729a965ab8d93fa0470abc263060c54c Mon Sep 17 00:00:00 2001
From: Claudiu Manoil <claudiu.manoil@freescale.com>
Date: Fri, 21 Mar 2014 09:33:17 +0200
Subject: gianfar: Fix P1010 config regression (SQ polling)

The P1010 device tree restricts the number of
supported interrupt groups to 1, although the eth
controller can support 2 interrupt groups and the
driver assumes the Multi-Group mode ("fsl,etsec2" model).

So, in this case the assumption that the Multi-Group
mode (MQ_MG_MODE) devices always support 2 interrupt
groups is false.  To fix this, a check for the actual
number of interrupt groups enabled in the board's
device tree has been added in gfar_probe for the
"fsl,etsec2" devices.

Without this fix, P1010 based boards claim support for
2 Tx queues to the net stack but only one is actually
allocated, leading to NULL access in xmit.  This issue
was introduced by enabling Single-Queue polling for
the P1010 devices.
(71ff9e3 gianfar: Use Single-Queue polling for
"fsl,etsec2")

Fixes: 71ff9e3df7e1c5d3293af6b595309124e8c97412
Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/freescale/gianfar.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index 6e12f9365856..9125d9abf099 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -754,9 +754,19 @@ static int gfar_of_init(struct platform_device *ofdev, struct net_device **pdev)
 		num_tx_qs = 1;
 		num_rx_qs = 1;
 	} else { /* MQ_MG_MODE */
+		/* get the actual number of supported groups */
+		unsigned int num_grps = of_get_available_child_count(np);
+
+		if (num_grps == 0 || num_grps > MAXGROUPS) {
+			dev_err(&ofdev->dev, "Invalid # of int groups(%d)\n",
+				num_grps);
+			pr_err("Cannot do alloc_etherdev, aborting\n");
+			return -EINVAL;
+		}
+
 		if (poll_mode == GFAR_SQ_POLLING) {
-			num_tx_qs = 2; /* one txq per int group */
-			num_rx_qs = 2; /* one rxq per int group */
+			num_tx_qs = num_grps; /* one txq per int group */
+			num_rx_qs = num_grps; /* one rxq per int group */
 		} else { /* GFAR_MQ_POLLING */
 			num_tx_qs = tx_queues ? *tx_queues : 1;
 			num_rx_qs = rx_queues ? *rx_queues : 1;
-- 
cgit v1.2.2


From 381709de1582ed868161d37a1ad54ba110c4353c Mon Sep 17 00:00:00 2001
From: Shahed Shaikh <shahed.shaikh@qlogic.com>
Date: Fri, 21 Mar 2014 04:41:16 -0400
Subject: qlcnic: Add VXLAN Tx offload support

This patch adds LSO, LSO6 and Tx checksum offload support for VXLAN
encapsulated packets on 83xx/84xx series adapters.

Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/qlogic/qlcnic/qlcnic.h        |  30 +++-
 .../net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c    |   4 +
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c     | 166 +++++++++++++++++----
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c   |  10 ++
 4 files changed, 181 insertions(+), 29 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
index df9daa335292..5c48263207dd 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
@@ -169,11 +169,20 @@ struct cmd_desc_type0 {
 
 	__le64 addr_buffer2;
 
-	__le16 reference_handle;
+	__le16 encap_descr;	/* 15:10 offset of outer L3 header,
+				 * 9:6 number of 32bit words in outer L3 header,
+				 * 5 offload outer L4 checksum,
+				 * 4 offload outer L3 checksum,
+				 * 3 Inner L4 type, TCP=0, UDP=1,
+				 * 2 Inner L3 type, IPv4=0, IPv6=1,
+				 * 1 Outer L3 type,IPv4=0, IPv6=1,
+				 * 0 type of encapsulation, GRE=0, VXLAN=1
+				 */
 	__le16 mss;
 	u8 port_ctxid;		/* 7:4 ctxid 3:0 port */
-	u8 total_hdr_length;	/* LSO only : MAC+IP+TCP Hdr size */
-	__le16 conn_id;		/* IPSec offoad only */
+	u8 hdr_length;		/* LSO only : MAC+IP+TCP Hdr size */
+	u8 outer_hdr_length;	/* Encapsulation only */
+	u8 rsvd1;
 
 	__le64 addr_buffer3;
 	__le64 addr_buffer1;
@@ -183,7 +192,9 @@ struct cmd_desc_type0 {
 	__le64 addr_buffer4;
 
 	u8 eth_addr[ETH_ALEN];
-	__le16 vlan_TCI;
+	__le16 vlan_TCI;	/* In case of  encapsulation,
+				 * this is for outer VLAN
+				 */
 
 } __attribute__ ((aligned(64)));
 
@@ -538,6 +549,8 @@ struct qlcnic_adapter_stats {
 	u64  txbytes;
 	u64  lrobytes;
 	u64  lso_frames;
+	u64  encap_lso_frames;
+	u64  encap_tx_csummed;
 	u64  xmit_on;
 	u64  xmit_off;
 	u64  skb_alloc_failure;
@@ -899,6 +912,9 @@ struct qlcnic_mac_vlan_list {
 #define QLCNIC_FW_CAPABILITY_2_BEACON		BIT_7
 #define QLCNIC_FW_CAPABILITY_2_PER_PORT_ESWITCH_CFG	BIT_9
 
+#define QLCNIC_83XX_FW_CAPAB_ENCAP_TX_OFFLOAD	BIT_1
+#define QLCNIC_83XX_FW_CAPAB_ENCAP_CKO_OFFLOAD	BIT_4
+
 /* module types */
 #define LINKEVENT_MODULE_NOT_PRESENT			1
 #define LINKEVENT_MODULE_OPTICAL_UNKNOWN		2
@@ -1806,6 +1822,12 @@ struct qlcnic_hardware_ops {
 
 extern struct qlcnic_nic_template qlcnic_vf_ops;
 
+static inline bool qlcnic_encap_tx_offload(struct qlcnic_adapter *adapter)
+{
+	return adapter->ahw->extra_capability[0] &
+	       QLCNIC_83XX_FW_CAPAB_ENCAP_TX_OFFLOAD;
+}
+
 static inline int qlcnic_start_firmware(struct qlcnic_adapter *adapter)
 {
 	return adapter->nic_ops->start_firmware(adapter);
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
index 1960609481ce..dfc25f7c2cf2 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
@@ -47,6 +47,10 @@ static const struct qlcnic_stats qlcnic_gstrings_stats[] = {
 	{"lro_pkts", QLC_SIZEOF(stats.lro_pkts), QLC_OFF(stats.lro_pkts)},
 	{"lrobytes", QLC_SIZEOF(stats.lrobytes), QLC_OFF(stats.lrobytes)},
 	{"lso_frames", QLC_SIZEOF(stats.lso_frames), QLC_OFF(stats.lso_frames)},
+	{"encap_lso_frames", QLC_SIZEOF(stats.encap_lso_frames),
+	 QLC_OFF(stats.encap_lso_frames)},
+	{"encap_tx_csummed", QLC_SIZEOF(stats.encap_tx_csummed),
+	 QLC_OFF(stats.encap_tx_csummed)},
 	{"skb_alloc_failure", QLC_SIZEOF(stats.skb_alloc_failure),
 	 QLC_OFF(stats.skb_alloc_failure)},
 	{"mac_filter_limit_overrun", QLC_SIZEOF(stats.mac_filter_limit_overrun),
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c
index 54ebf300332a..7252af99ad01 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c
@@ -13,16 +13,19 @@
 
 #include "qlcnic.h"
 
-#define TX_ETHER_PKT	0x01
-#define TX_TCP_PKT	0x02
-#define TX_UDP_PKT	0x03
-#define TX_IP_PKT	0x04
-#define TX_TCP_LSO	0x05
-#define TX_TCP_LSO6	0x06
-#define TX_TCPV6_PKT	0x0b
-#define TX_UDPV6_PKT	0x0c
-#define FLAGS_VLAN_TAGGED	0x10
-#define FLAGS_VLAN_OOB		0x40
+#define QLCNIC_TX_ETHER_PKT		0x01
+#define QLCNIC_TX_TCP_PKT		0x02
+#define QLCNIC_TX_UDP_PKT		0x03
+#define QLCNIC_TX_IP_PKT		0x04
+#define QLCNIC_TX_TCP_LSO		0x05
+#define QLCNIC_TX_TCP_LSO6		0x06
+#define QLCNIC_TX_ENCAP_PKT		0x07
+#define QLCNIC_TX_ENCAP_LSO		0x08
+#define QLCNIC_TX_TCPV6_PKT		0x0b
+#define QLCNIC_TX_UDPV6_PKT		0x0c
+
+#define QLCNIC_FLAGS_VLAN_TAGGED	0x10
+#define QLCNIC_FLAGS_VLAN_OOB		0x40
 
 #define qlcnic_set_tx_vlan_tci(cmd_desc, v)	\
 	(cmd_desc)->vlan_TCI = cpu_to_le16(v);
@@ -364,6 +367,101 @@ static void qlcnic_send_filter(struct qlcnic_adapter *adapter,
 	spin_unlock(&adapter->mac_learn_lock);
 }
 
+#define QLCNIC_ENCAP_VXLAN_PKT		BIT_0
+#define QLCNIC_ENCAP_OUTER_L3_IP6	BIT_1
+#define QLCNIC_ENCAP_INNER_L3_IP6	BIT_2
+#define QLCNIC_ENCAP_INNER_L4_UDP	BIT_3
+#define QLCNIC_ENCAP_DO_L3_CSUM		BIT_4
+#define QLCNIC_ENCAP_DO_L4_CSUM		BIT_5
+
+static int qlcnic_tx_encap_pkt(struct qlcnic_adapter *adapter,
+			       struct cmd_desc_type0 *first_desc,
+			       struct sk_buff *skb,
+			       struct qlcnic_host_tx_ring *tx_ring)
+{
+	u8 opcode = 0, inner_hdr_len = 0, outer_hdr_len = 0, total_hdr_len = 0;
+	int copied, copy_len, descr_size;
+	u32 producer = tx_ring->producer;
+	struct cmd_desc_type0 *hwdesc;
+	u16 flags = 0, encap_descr = 0;
+
+	opcode = QLCNIC_TX_ETHER_PKT;
+	encap_descr = QLCNIC_ENCAP_VXLAN_PKT;
+
+	if (skb_is_gso(skb)) {
+		inner_hdr_len = skb_inner_transport_header(skb) +
+				inner_tcp_hdrlen(skb) -
+				skb_inner_mac_header(skb);
+
+		/* VXLAN header size = 8 */
+		outer_hdr_len = skb_transport_offset(skb) + 8 +
+				sizeof(struct udphdr);
+		first_desc->outer_hdr_length = outer_hdr_len;
+		total_hdr_len = inner_hdr_len + outer_hdr_len;
+		encap_descr |= QLCNIC_ENCAP_DO_L3_CSUM |
+			       QLCNIC_ENCAP_DO_L4_CSUM;
+		first_desc->mss = cpu_to_le16(skb_shinfo(skb)->gso_size);
+		first_desc->hdr_length = inner_hdr_len;
+
+		/* Copy inner and outer headers in Tx descriptor(s)
+		 * If total_hdr_len > cmd_desc_type0, use multiple
+		 * descriptors
+		 */
+		copied = 0;
+		descr_size = (int)sizeof(struct cmd_desc_type0);
+		while (copied < total_hdr_len) {
+			copy_len = min(descr_size, (total_hdr_len - copied));
+			hwdesc = &tx_ring->desc_head[producer];
+			tx_ring->cmd_buf_arr[producer].skb = NULL;
+			skb_copy_from_linear_data_offset(skb, copied,
+							 (char *)hwdesc,
+							 copy_len);
+			copied += copy_len;
+			producer = get_next_index(producer, tx_ring->num_desc);
+		}
+
+		tx_ring->producer = producer;
+
+		/* Make sure updated tx_ring->producer is visible
+		 * for qlcnic_tx_avail()
+		 */
+		smp_mb();
+		adapter->stats.encap_lso_frames++;
+
+		opcode = QLCNIC_TX_ENCAP_LSO;
+	} else if (skb->ip_summed == CHECKSUM_PARTIAL) {
+		if (inner_ip_hdr(skb)->version == 6) {
+			if (inner_ipv6_hdr(skb)->nexthdr == IPPROTO_UDP)
+				encap_descr |= QLCNIC_ENCAP_INNER_L4_UDP;
+		} else {
+			if (inner_ip_hdr(skb)->protocol == IPPROTO_UDP)
+				encap_descr |= QLCNIC_ENCAP_INNER_L4_UDP;
+		}
+
+		adapter->stats.encap_tx_csummed++;
+		opcode = QLCNIC_TX_ENCAP_PKT;
+	}
+
+	/* Prepare first 16 bits of byte offset 16 of Tx descriptor */
+	if (ip_hdr(skb)->version == 6)
+		encap_descr |= QLCNIC_ENCAP_OUTER_L3_IP6;
+
+	/* outer IP header's size in 32bit words size*/
+	encap_descr |= (skb_network_header_len(skb) >> 2) << 6;
+
+	/* outer IP header offset */
+	encap_descr |= skb_network_offset(skb) << 10;
+	first_desc->encap_descr = cpu_to_le16(encap_descr);
+
+	first_desc->tcp_hdr_offset = skb_inner_transport_header(skb) -
+				     skb->data;
+	first_desc->ip_hdr_offset = skb_inner_network_offset(skb);
+
+	qlcnic_set_tx_flags_opcode(first_desc, flags, opcode);
+
+	return 0;
+}
+
 static int qlcnic_tx_pkt(struct qlcnic_adapter *adapter,
 			 struct cmd_desc_type0 *first_desc, struct sk_buff *skb,
 			 struct qlcnic_host_tx_ring *tx_ring)
@@ -378,11 +476,11 @@ static int qlcnic_tx_pkt(struct qlcnic_adapter *adapter,
 
 	if (protocol == ETH_P_8021Q) {
 		vh = (struct vlan_ethhdr *)skb->data;
-		flags = FLAGS_VLAN_TAGGED;
+		flags = QLCNIC_FLAGS_VLAN_TAGGED;
 		vlan_tci = ntohs(vh->h_vlan_TCI);
 		protocol = ntohs(vh->h_vlan_encapsulated_proto);
 	} else if (vlan_tx_tag_present(skb)) {
-		flags = FLAGS_VLAN_OOB;
+		flags = QLCNIC_FLAGS_VLAN_OOB;
 		vlan_tci = vlan_tx_tag_get(skb);
 	}
 	if (unlikely(adapter->tx_pvid)) {
@@ -391,7 +489,7 @@ static int qlcnic_tx_pkt(struct qlcnic_adapter *adapter,
 		if (vlan_tci && (adapter->flags & QLCNIC_TAGGING_ENABLED))
 			goto set_flags;
 
-		flags = FLAGS_VLAN_OOB;
+		flags = QLCNIC_FLAGS_VLAN_OOB;
 		vlan_tci = adapter->tx_pvid;
 	}
 set_flags:
@@ -402,25 +500,26 @@ set_flags:
 		flags |= BIT_0;
 		memcpy(&first_desc->eth_addr, skb->data, ETH_ALEN);
 	}
-	opcode = TX_ETHER_PKT;
+	opcode = QLCNIC_TX_ETHER_PKT;
 	if (skb_is_gso(skb)) {
 		hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
 		first_desc->mss = cpu_to_le16(skb_shinfo(skb)->gso_size);
-		first_desc->total_hdr_length = hdr_len;
-		opcode = (protocol == ETH_P_IPV6) ? TX_TCP_LSO6 : TX_TCP_LSO;
+		first_desc->hdr_length = hdr_len;
+		opcode = (protocol == ETH_P_IPV6) ? QLCNIC_TX_TCP_LSO6 :
+						    QLCNIC_TX_TCP_LSO;
 
 		/* For LSO, we need to copy the MAC/IP/TCP headers into
 		* the descriptor ring */
 		copied = 0;
 		offset = 2;
 
-		if (flags & FLAGS_VLAN_OOB) {
-			first_desc->total_hdr_length += VLAN_HLEN;
+		if (flags & QLCNIC_FLAGS_VLAN_OOB) {
+			first_desc->hdr_length += VLAN_HLEN;
 			first_desc->tcp_hdr_offset = VLAN_HLEN;
 			first_desc->ip_hdr_offset = VLAN_HLEN;
 
 			/* Only in case of TSO on vlan device */
-			flags |= FLAGS_VLAN_TAGGED;
+			flags |= QLCNIC_FLAGS_VLAN_TAGGED;
 
 			/* Create a TSO vlan header template for firmware */
 			hwdesc = &tx_ring->desc_head[producer];
@@ -464,16 +563,16 @@ set_flags:
 			l4proto = ip_hdr(skb)->protocol;
 
 			if (l4proto == IPPROTO_TCP)
-				opcode = TX_TCP_PKT;
+				opcode = QLCNIC_TX_TCP_PKT;
 			else if (l4proto == IPPROTO_UDP)
-				opcode = TX_UDP_PKT;
+				opcode = QLCNIC_TX_UDP_PKT;
 		} else if (protocol == ETH_P_IPV6) {
 			l4proto = ipv6_hdr(skb)->nexthdr;
 
 			if (l4proto == IPPROTO_TCP)
-				opcode = TX_TCPV6_PKT;
+				opcode = QLCNIC_TX_TCPV6_PKT;
 			else if (l4proto == IPPROTO_UDP)
-				opcode = TX_UDPV6_PKT;
+				opcode = QLCNIC_TX_UDPV6_PKT;
 		}
 	}
 	first_desc->tcp_hdr_offset += skb_transport_offset(skb);
@@ -563,6 +662,8 @@ netdev_tx_t qlcnic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 	struct ethhdr *phdr;
 	int i, k, frag_count, delta = 0;
 	u32 producer, num_txd;
+	u16 protocol;
+	bool l4_is_udp = false;
 
 	if (!test_bit(__QLCNIC_DEV_UP, &adapter->state)) {
 		netif_tx_stop_all_queues(netdev);
@@ -653,8 +754,23 @@ netdev_tx_t qlcnic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 	tx_ring->producer = get_next_index(producer, num_txd);
 	smp_mb();
 
-	if (unlikely(qlcnic_tx_pkt(adapter, first_desc, skb, tx_ring)))
-		goto unwind_buff;
+	protocol = ntohs(skb->protocol);
+	if (protocol == ETH_P_IP)
+		l4_is_udp = ip_hdr(skb)->protocol == IPPROTO_UDP;
+	else if (protocol == ETH_P_IPV6)
+		l4_is_udp = ipv6_hdr(skb)->nexthdr == IPPROTO_UDP;
+
+	/* Check if it is a VXLAN packet */
+	if (!skb->encapsulation || !l4_is_udp ||
+	    !qlcnic_encap_tx_offload(adapter)) {
+		if (unlikely(qlcnic_tx_pkt(adapter, first_desc, skb,
+					   tx_ring)))
+			goto unwind_buff;
+	} else {
+		if (unlikely(qlcnic_tx_encap_pkt(adapter, first_desc,
+						 skb, tx_ring)))
+			goto unwind_buff;
+	}
 
 	if (adapter->drv_mac_learn)
 		qlcnic_send_filter(adapter, first_desc, skb);
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
index 4b92d9d90267..6655bf49c79b 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
@@ -2205,6 +2205,16 @@ qlcnic_setup_netdev(struct qlcnic_adapter *adapter, struct net_device *netdev,
 	if (adapter->ahw->capabilities & QLCNIC_FW_CAPABILITY_HW_LRO)
 		netdev->features |= NETIF_F_LRO;
 
+	if (qlcnic_encap_tx_offload(adapter)) {
+		netdev->features |= NETIF_F_GSO_UDP_TUNNEL;
+
+		/* encapsulation Tx offload supported by Adapter */
+		netdev->hw_enc_features = NETIF_F_IP_CSUM        |
+					  NETIF_F_GSO_UDP_TUNNEL |
+					  NETIF_F_TSO            |
+					  NETIF_F_TSO6;
+	}
+
 	netdev->hw_features = netdev->features;
 	netdev->priv_flags |= IFF_UNICAST_FLT;
 	netdev->irq = adapter->msix_entries[0].vector;
-- 
cgit v1.2.2


From 2b3d7b758c68775cdebd95787454d12e0b8247e7 Mon Sep 17 00:00:00 2001
From: Shahed Shaikh <shahed.shaikh@qlogic.com>
Date: Fri, 21 Mar 2014 04:41:17 -0400
Subject: qlcnic: Add VXLAN Rx offload support

This patch adds Rx checksum offload support for VXLAN.
Implements .ndo_{add|del}_vxlan_port netdev ops.
Adapter supports only one VXLAN port, so program adapter with
very first UDP port which VXLAN driver is listening to.

Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/qlogic/qlcnic/qlcnic.h        | 11 +++
 .../net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c    |  3 +-
 .../net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h    |  3 +-
 .../net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c  | 87 ++++++++++++++++++++++
 .../net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c    |  2 +
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h     |  1 +
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c     | 13 ++++
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c   | 38 ++++++++++
 8 files changed, 156 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
index 5c48263207dd..59255fb8cded 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
@@ -535,6 +535,7 @@ struct qlcnic_hardware_context {
 	u8 extend_lb_time;
 	u8 phys_port_id[ETH_ALEN];
 	u8 lb_mode;
+	u16 vxlan_port;
 };
 
 struct qlcnic_adapter_stats {
@@ -551,6 +552,7 @@ struct qlcnic_adapter_stats {
 	u64  lso_frames;
 	u64  encap_lso_frames;
 	u64  encap_tx_csummed;
+	u64  encap_rx_csummed;
 	u64  xmit_on;
 	u64  xmit_off;
 	u64  skb_alloc_failure;
@@ -912,6 +914,7 @@ struct qlcnic_mac_vlan_list {
 #define QLCNIC_FW_CAPABILITY_2_BEACON		BIT_7
 #define QLCNIC_FW_CAPABILITY_2_PER_PORT_ESWITCH_CFG	BIT_9
 
+#define QLCNIC_83XX_FW_CAPAB_ENCAP_RX_OFFLOAD	BIT_0
 #define QLCNIC_83XX_FW_CAPAB_ENCAP_TX_OFFLOAD	BIT_1
 #define QLCNIC_83XX_FW_CAPAB_ENCAP_CKO_OFFLOAD	BIT_4
 
@@ -1008,6 +1011,8 @@ struct qlcnic_ipaddr {
 #define QLCNIC_APP_CHANGED_FLAGS	0x20000
 #define QLCNIC_HAS_PHYS_PORT_ID		0x40000
 #define QLCNIC_TSS_RSS			0x80000
+#define QLCNIC_ADD_VXLAN_PORT		0x100000
+#define QLCNIC_DEL_VXLAN_PORT		0x200000
 
 #define QLCNIC_IS_MSI_FAMILY(adapter) \
 	((adapter)->flags & (QLCNIC_MSI_ENABLED | QLCNIC_MSIX_ENABLED))
@@ -1828,6 +1833,12 @@ static inline bool qlcnic_encap_tx_offload(struct qlcnic_adapter *adapter)
 	       QLCNIC_83XX_FW_CAPAB_ENCAP_TX_OFFLOAD;
 }
 
+static inline bool qlcnic_encap_rx_offload(struct qlcnic_adapter *adapter)
+{
+	return adapter->ahw->extra_capability[0] &
+	       QLCNIC_83XX_FW_CAPAB_ENCAP_RX_OFFLOAD;
+}
+
 static inline int qlcnic_start_firmware(struct qlcnic_adapter *adapter)
 {
 	return adapter->nic_ops->start_firmware(adapter);
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
index 3b83fbde4975..b7cffb46a75d 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
@@ -77,7 +77,7 @@ static const struct qlcnic_mailbox_metadata qlcnic_83xx_mbx_tbl[] = {
 	{QLCNIC_CMD_GET_PORT_CONFIG, 2, 2},
 	{QLCNIC_CMD_GET_LINK_STATUS, 2, 4},
 	{QLCNIC_CMD_IDC_ACK, 5, 1},
-	{QLCNIC_CMD_INIT_NIC_FUNC, 2, 1},
+	{QLCNIC_CMD_INIT_NIC_FUNC, 3, 1},
 	{QLCNIC_CMD_STOP_NIC_FUNC, 2, 1},
 	{QLCNIC_CMD_SET_LED_CONFIG, 5, 1},
 	{QLCNIC_CMD_GET_LED_CONFIG, 1, 5},
@@ -87,6 +87,7 @@ static const struct qlcnic_mailbox_metadata qlcnic_83xx_mbx_tbl[] = {
 	{QLCNIC_CMD_BC_EVENT_SETUP, 2, 1},
 	{QLCNIC_CMD_DCB_QUERY_CAP, 1, 2},
 	{QLCNIC_CMD_DCB_QUERY_PARAM, 1, 50},
+	{QLCNIC_CMD_SET_INGRESS_ENCAP, 2, 1},
 };
 
 const u32 qlcnic_83xx_ext_reg_tbl[] = {
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h
index 81c1889f6f3e..88d809c35633 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h
@@ -528,8 +528,9 @@ enum qlc_83xx_ext_regs {
 };
 
 /* Initialize/Stop NIC command bit definitions */
-#define QLC_REGISTER_DCB_AEN		BIT_1
 #define QLC_REGISTER_LB_IDC		BIT_0
+#define QLC_REGISTER_DCB_AEN		BIT_1
+#define QLC_83XX_MULTI_TENANCY_INFO	BIT_29
 #define QLC_INIT_FW_RESOURCES		BIT_31
 
 /* 83xx funcitons */
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
index 90a2dda351ec..ec399b7f5bd7 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
@@ -1020,10 +1020,97 @@ static int qlcnic_83xx_idc_check_state_validity(struct qlcnic_adapter *adapter,
 	return 0;
 }
 
+#define QLC_83XX_ENCAP_TYPE_VXLAN	BIT_1
+#define QLC_83XX_MATCH_ENCAP_ID		BIT_2
+#define QLC_83XX_SET_VXLAN_UDP_DPORT	BIT_3
+#define QLC_83XX_VXLAN_UDP_DPORT(PORT)	((PORT & 0xffff) << 16)
+
+#define QLCNIC_ENABLE_INGRESS_ENCAP_PARSING 1
+#define QLCNIC_DISABLE_INGRESS_ENCAP_PARSING 0
+
+static int qlcnic_set_vxlan_port(struct qlcnic_adapter *adapter)
+{
+	u16 port = adapter->ahw->vxlan_port;
+	struct qlcnic_cmd_args cmd;
+	int ret = 0;
+
+	memset(&cmd, 0, sizeof(cmd));
+
+	ret = qlcnic_alloc_mbx_args(&cmd, adapter,
+				    QLCNIC_CMD_INIT_NIC_FUNC);
+	if (ret)
+		return ret;
+
+	cmd.req.arg[1] = QLC_83XX_MULTI_TENANCY_INFO;
+	cmd.req.arg[2] = QLC_83XX_ENCAP_TYPE_VXLAN |
+			 QLC_83XX_SET_VXLAN_UDP_DPORT |
+			 QLC_83XX_VXLAN_UDP_DPORT(port);
+
+	ret = qlcnic_issue_cmd(adapter, &cmd);
+	if (ret)
+		netdev_err(adapter->netdev,
+			   "Failed to set VXLAN port %d in adapter\n",
+			   port);
+
+	qlcnic_free_mbx_args(&cmd);
+
+	return ret;
+}
+
+static int qlcnic_set_vxlan_parsing(struct qlcnic_adapter *adapter,
+				    bool state)
+{
+	u16 vxlan_port = adapter->ahw->vxlan_port;
+	struct qlcnic_cmd_args cmd;
+	int ret = 0;
+
+	memset(&cmd, 0, sizeof(cmd));
+
+	ret = qlcnic_alloc_mbx_args(&cmd, adapter,
+				    QLCNIC_CMD_SET_INGRESS_ENCAP);
+	if (ret)
+		return ret;
+
+	cmd.req.arg[1] = state ? QLCNIC_ENABLE_INGRESS_ENCAP_PARSING :
+				 QLCNIC_DISABLE_INGRESS_ENCAP_PARSING;
+
+	ret = qlcnic_issue_cmd(adapter, &cmd);
+	if (ret)
+		netdev_err(adapter->netdev,
+			   "Failed to %s VXLAN parsing for port %d\n",
+			   state ? "enable" : "disable", vxlan_port);
+	else
+		netdev_info(adapter->netdev,
+			    "%s VXLAN parsing for port %d\n",
+			    state ? "Enabled" : "Disabled", vxlan_port);
+
+	qlcnic_free_mbx_args(&cmd);
+
+	return ret;
+}
+
 static void qlcnic_83xx_periodic_tasks(struct qlcnic_adapter *adapter)
 {
+	struct qlcnic_hardware_context *ahw = adapter->ahw;
+
 	if (adapter->fhash.fnum)
 		qlcnic_prune_lb_filters(adapter);
+
+	if (adapter->flags & QLCNIC_ADD_VXLAN_PORT) {
+		if (qlcnic_set_vxlan_port(adapter))
+			return;
+
+		if (qlcnic_set_vxlan_parsing(adapter, true))
+			return;
+
+		adapter->flags &= ~QLCNIC_ADD_VXLAN_PORT;
+	} else if (adapter->flags & QLCNIC_DEL_VXLAN_PORT) {
+		if (qlcnic_set_vxlan_parsing(adapter, false))
+			return;
+
+		ahw->vxlan_port = 0;
+		adapter->flags &= ~QLCNIC_DEL_VXLAN_PORT;
+	}
 }
 
 /**
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
index dfc25f7c2cf2..5bacf5210aed 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
@@ -51,6 +51,8 @@ static const struct qlcnic_stats qlcnic_gstrings_stats[] = {
 	 QLC_OFF(stats.encap_lso_frames)},
 	{"encap_tx_csummed", QLC_SIZEOF(stats.encap_tx_csummed),
 	 QLC_OFF(stats.encap_tx_csummed)},
+	{"encap_rx_csummed", QLC_SIZEOF(stats.encap_rx_csummed),
+	 QLC_OFF(stats.encap_rx_csummed)},
 	{"skb_alloc_failure", QLC_SIZEOF(stats.skb_alloc_failure),
 	 QLC_OFF(stats.skb_alloc_failure)},
 	{"mac_filter_limit_overrun", QLC_SIZEOF(stats.mac_filter_limit_overrun),
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h
index 576b301b11ef..cbe2399c30a0 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h
@@ -98,6 +98,7 @@ enum qlcnic_regs {
 #define QLCNIC_CMD_GET_LINK_EVENT		0x48
 #define QLCNIC_CMD_CONFIGURE_MAC_RX_MODE	0x49
 #define QLCNIC_CMD_CONFIGURE_HW_LRO		0x4A
+#define QLCNIC_CMD_SET_INGRESS_ENCAP		0x4E
 #define QLCNIC_CMD_INIT_NIC_FUNC		0x60
 #define QLCNIC_CMD_STOP_NIC_FUNC		0x61
 #define QLCNIC_CMD_IDC_ACK			0x63
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c
index 7252af99ad01..173b3d12991f 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c
@@ -1703,6 +1703,13 @@ static inline int qlcnic_83xx_is_lb_pkt(u64 sts_data, int lro_pkt)
 		return (sts_data & QLC_83XX_NORMAL_LB_PKT) ? 1 : 0;
 }
 
+#define QLCNIC_ENCAP_LENGTH_MASK	0x7f
+
+static inline u8 qlcnic_encap_length(u64 sts_data)
+{
+	return sts_data & QLCNIC_ENCAP_LENGTH_MASK;
+}
+
 static struct qlcnic_rx_buffer *
 qlcnic_83xx_process_rcv(struct qlcnic_adapter *adapter,
 			struct qlcnic_host_sds_ring *sds_ring,
@@ -1753,6 +1760,12 @@ qlcnic_83xx_process_rcv(struct qlcnic_adapter *adapter,
 
 	skb->protocol = eth_type_trans(skb, netdev);
 
+	if (qlcnic_encap_length(sts_data[1]) &&
+	    skb->ip_summed == CHECKSUM_UNNECESSARY) {
+		skb->encapsulation = 1;
+		adapter->stats.encap_rx_csummed++;
+	}
+
 	if (vid != 0xffff)
 		__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vid);
 
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
index 6655bf49c79b..79be451a3ffc 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
@@ -21,6 +21,7 @@
 #include <linux/aer.h>
 #include <linux/log2.h>
 #include <linux/pci.h>
+#include <net/vxlan.h>
 
 MODULE_DESCRIPTION("QLogic 1/10 GbE Converged/Intelligent Ethernet Driver");
 MODULE_LICENSE("GPL");
@@ -461,6 +462,35 @@ static int qlcnic_get_phys_port_id(struct net_device *netdev,
 	return 0;
 }
 
+static void qlcnic_add_vxlan_port(struct net_device *netdev,
+				  sa_family_t sa_family, __be16 port)
+{
+	struct qlcnic_adapter *adapter = netdev_priv(netdev);
+	struct qlcnic_hardware_context *ahw = adapter->ahw;
+
+	/* Adapter supports only one VXLAN port. Use very first port
+	 * for enabling offload
+	 */
+	if (!qlcnic_encap_rx_offload(adapter) || ahw->vxlan_port)
+		return;
+
+	ahw->vxlan_port = ntohs(port);
+	adapter->flags |= QLCNIC_ADD_VXLAN_PORT;
+}
+
+static void qlcnic_del_vxlan_port(struct net_device *netdev,
+				  sa_family_t sa_family, __be16 port)
+{
+	struct qlcnic_adapter *adapter = netdev_priv(netdev);
+	struct qlcnic_hardware_context *ahw = adapter->ahw;
+
+	if (!qlcnic_encap_rx_offload(adapter) || !ahw->vxlan_port ||
+	    (ahw->vxlan_port != ntohs(port)))
+		return;
+
+	adapter->flags |= QLCNIC_DEL_VXLAN_PORT;
+}
+
 static const struct net_device_ops qlcnic_netdev_ops = {
 	.ndo_open	   = qlcnic_open,
 	.ndo_stop	   = qlcnic_close,
@@ -479,6 +509,8 @@ static const struct net_device_ops qlcnic_netdev_ops = {
 	.ndo_fdb_del		= qlcnic_fdb_del,
 	.ndo_fdb_dump		= qlcnic_fdb_dump,
 	.ndo_get_phys_port_id	= qlcnic_get_phys_port_id,
+	.ndo_add_vxlan_port	= qlcnic_add_vxlan_port,
+	.ndo_del_vxlan_port	= qlcnic_del_vxlan_port,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller = qlcnic_poll_controller,
 #endif
@@ -1943,6 +1975,9 @@ qlcnic_attach(struct qlcnic_adapter *adapter)
 
 	qlcnic_create_sysfs_entries(adapter);
 
+	if (qlcnic_encap_rx_offload(adapter))
+		vxlan_get_rx_port(netdev);
+
 	adapter->is_up = QLCNIC_ADAPTER_UP_MAGIC;
 	return 0;
 
@@ -2215,6 +2250,9 @@ qlcnic_setup_netdev(struct qlcnic_adapter *adapter, struct net_device *netdev,
 					  NETIF_F_TSO6;
 	}
 
+	if (qlcnic_encap_rx_offload(adapter))
+		netdev->hw_enc_features |= NETIF_F_RXCSUM;
+
 	netdev->hw_features = netdev->features;
 	netdev->priv_flags |= IFF_UNICAST_FLT;
 	netdev->irq = adapter->msix_entries[0].vector;
-- 
cgit v1.2.2


From 8af7b7f81c31e35b4fed4598065c9b9f0f78485a Mon Sep 17 00:00:00 2001
From: Shahed Shaikh <shahed.shaikh@qlogic.com>
Date: Fri, 21 Mar 2014 04:41:18 -0400
Subject: qlcnic: Update version to 5.3.57

Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/qlogic/qlcnic/qlcnic.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
index 59255fb8cded..b9039b569beb 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
@@ -38,8 +38,8 @@
 
 #define _QLCNIC_LINUX_MAJOR 5
 #define _QLCNIC_LINUX_MINOR 3
-#define _QLCNIC_LINUX_SUBVERSION 56
-#define QLCNIC_LINUX_VERSIONID  "5.3.56"
+#define _QLCNIC_LINUX_SUBVERSION 57
+#define QLCNIC_LINUX_VERSIONID  "5.3.57"
 #define QLCNIC_DRV_IDC_VER  0x01
 #define QLCNIC_DRIVER_VERSION  ((_QLCNIC_LINUX_MAJOR << 16) |\
 		 (_QLCNIC_LINUX_MINOR << 8) | (_QLCNIC_LINUX_SUBVERSION))
-- 
cgit v1.2.2


From 8adfc3ae45fa854205608a04e5c71cd1c833579f Mon Sep 17 00:00:00 2001
From: Vince Bridgers <vbridgers2013@gmail.com>
Date: Thu, 20 Mar 2014 20:43:15 -0500
Subject: Altera TSE: Set version number by driver's get regs

Set the version number returned by the driver's get regs routine
invoked by ethtool so formatting can be dependent on the version
number returned, and any interesting formatted output can check
the version number for specific types of register data returned.

Signed-off-by: Vince Bridgers <vbridgers2013@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/altera/altera_tse_ethtool.c | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/altera/altera_tse_ethtool.c b/drivers/net/ethernet/altera/altera_tse_ethtool.c
index 63ac5f4960e4..319ca74f5e74 100644
--- a/drivers/net/ethernet/altera/altera_tse_ethtool.c
+++ b/drivers/net/ethernet/altera/altera_tse_ethtool.c
@@ -181,6 +181,14 @@ static void tse_get_regs(struct net_device *dev, struct ethtool_regs *regs,
 	u32 *tse_mac_regs = (u32 *)priv->mac_dev;
 	u32 *buf = regbuf;
 
+	/* Set version to a known value, so ethtool knows
+	 * how to do any special formatting of this data.
+	 * This version number will need to change if and
+	 * when this register table is changed.
+	 */
+
+	regs->version = 1;
+
 	for (i = 0; i < TSE_NUM_REGS; i++)
 		buf[i] = ioread32(&tse_mac_regs[i]);
 }
-- 
cgit v1.2.2


From a804ad0e3b4a8302412304a5e9490ea318288cc2 Mon Sep 17 00:00:00 2001
From: Vince Bridgers <vbridgers2013@gmail.com>
Date: Thu, 20 Mar 2014 20:43:16 -0500
Subject: Altera TSE: Correct typecast issue detected by kbuild test robot

This patch addresses a portable pointer arithmetic issue in the
original submission found by the kbuild test robot.

config: make ARCH=i386 allyesconfig

   altera_sgdma.c: In function 'sgdma_txphysaddr':
>> altera_sgdma.c:393:33: warning: cast from
>> pointer to integer of different size [-Wpointer-to-int-cast]
     dma_addr_t offs = (dma_addr_t)((dma_addr_t)desc -
                                    ^
>> altera_sgdma.c:394:5: warning: cast from
>> pointer to integer of different size [-Wpointer-to-int-cast]
        (dma_addr_t)priv->tx_dma_desc);
        ^
   altera_sgdma.c: In function 'sgdma_rxphysaddr':
>> altera_sgdma.c:403:33: warning: cast from
>> pointer to integer of different size [-Wpointer-to-int-cast]
     dma_addr_t offs = (dma_addr_t)((dma_addr_t)desc -
                                    ^
>> altera_sgdma.c:404:5: warning: cast from
>> pointer to integer of different size [-Wpointer-to-int-cast]
        (dma_addr_t)priv->rx_dma_desc);
        ^

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Vince Bridgers <vbridgers2013@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/altera/altera_sgdma.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/altera/altera_sgdma.c b/drivers/net/ethernet/altera/altera_sgdma.c
index cbeee073a9ff..ebc4840a0dbb 100644
--- a/drivers/net/ethernet/altera/altera_sgdma.c
+++ b/drivers/net/ethernet/altera/altera_sgdma.c
@@ -390,9 +390,8 @@ sgdma_txphysaddr(struct altera_tse_private *priv,
 		 struct sgdma_descrip *desc)
 {
 	dma_addr_t paddr = priv->txdescmem_busaddr;
-	dma_addr_t offs = (dma_addr_t)((dma_addr_t)desc -
-				(dma_addr_t)priv->tx_dma_desc);
-	return paddr + offs;
+	uintptr_t offs = (uintptr_t)desc - (uintptr_t)priv->tx_dma_desc;
+	return (dma_addr_t)((uintptr_t)paddr + offs);
 }
 
 static dma_addr_t
@@ -400,9 +399,8 @@ sgdma_rxphysaddr(struct altera_tse_private *priv,
 		 struct sgdma_descrip *desc)
 {
 	dma_addr_t paddr = priv->rxdescmem_busaddr;
-	dma_addr_t offs = (dma_addr_t)((dma_addr_t)desc -
-				(dma_addr_t)priv->rx_dma_desc);
-	return paddr + offs;
+	uintptr_t offs = (uintptr_t)desc - (uintptr_t)priv->rx_dma_desc;
+	return (dma_addr_t)((uintptr_t)paddr + offs);
 }
 
 #define list_remove_head(list, entry, type, member)			\
-- 
cgit v1.2.2


From 80175f93f3bd88817f6a59a7253a79a7267f6f82 Mon Sep 17 00:00:00 2001
From: Vince Bridgers <vbridgers2013@gmail.com>
Date: Thu, 20 Mar 2014 20:43:17 -0500
Subject: Altera TSE: Correct two typos in original submission

This patch addresses two typos in the original driver submission. One derived
from a cut & paste error, and another is a misspelling.

Signed-off-by: Vince Bridgers <vbridgers2013@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/altera/altera_sgdma.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/altera/altera_sgdma.c b/drivers/net/ethernet/altera/altera_sgdma.c
index ebc4840a0dbb..0ee96639ae44 100644
--- a/drivers/net/ethernet/altera/altera_sgdma.c
+++ b/drivers/net/ethernet/altera/altera_sgdma.c
@@ -84,8 +84,8 @@ int sgdma_initialize(struct altera_tse_private *priv)
 		return -EINVAL;
 	}
 
-	priv->txdescphys = dma_map_single(priv->device, priv->rx_dma_desc,
-					  priv->rxdescmem, DMA_TO_DEVICE);
+	priv->txdescphys = dma_map_single(priv->device, priv->tx_dma_desc,
+					  priv->txdescmem, DMA_TO_DEVICE);
 
 	if (dma_mapping_error(priv->device, priv->txdescphys)) {
 		sgdma_uninitialize(priv);
@@ -340,7 +340,7 @@ static int sgdma_async_read(struct altera_tse_private *priv)
 		/* clear control and status */
 		iowrite32(0, &csr->control);
 
-		/* If statuc available, clear those bits */
+		/* If status available, clear those bits */
 		if (sts & 0xf)
 			iowrite32(0xf, &csr->status);
 
-- 
cgit v1.2.2


From dffe278f0a3755bc00b3dd48c45fa6992458520d Mon Sep 17 00:00:00 2001
From: wangweidong <wangweidong1@huawei.com>
Date: Fri, 21 Mar 2014 09:50:43 +0800
Subject: atheros/atlx: use SET_ETHTOOL_OPS directly

As commit a6e28b34205b("staging/et131x: use SET_ETHTOOL_OPS
directly"), using a wrapper around SET_ETHTOOL_OPS macro is
not actually required, remove and use SET_ETHTOOL_OPS directly.

Signed-off-by: Wang Weidong <wangweidong1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/atheros/atlx/atl2.c | 10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/atheros/atlx/atl2.c b/drivers/net/ethernet/atheros/atlx/atl2.c
index 265ce1b752ed..78befb522a52 100644
--- a/drivers/net/ethernet/atheros/atlx/atl2.c
+++ b/drivers/net/ethernet/atheros/atlx/atl2.c
@@ -55,6 +55,7 @@ static const char atl2_driver_name[] = "atl2";
 static const char atl2_driver_string[] = "Atheros(R) L2 Ethernet Driver";
 static const char atl2_copyright[] = "Copyright (c) 2007 Atheros Corporation.";
 static const char atl2_driver_version[] = ATL2_DRV_VERSION;
+static const struct ethtool_ops atl2_ethtool_ops;
 
 MODULE_AUTHOR("Atheros Corporation <xiong.huang@atheros.com>, Chris Snook <csnook@redhat.com>");
 MODULE_DESCRIPTION("Atheros Fast Ethernet Network Driver");
@@ -71,8 +72,6 @@ static DEFINE_PCI_DEVICE_TABLE(atl2_pci_tbl) = {
 };
 MODULE_DEVICE_TABLE(pci, atl2_pci_tbl);
 
-static void atl2_set_ethtool_ops(struct net_device *netdev);
-
 static void atl2_check_options(struct atl2_adapter *adapter);
 
 /**
@@ -1397,7 +1396,7 @@ static int atl2_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	atl2_setup_pcicmd(pdev);
 
 	netdev->netdev_ops = &atl2_netdev_ops;
-	atl2_set_ethtool_ops(netdev);
+	SET_ETHTOOL_OPS(netdev, &atl2_ethtool_ops);
 	netdev->watchdog_timeo = 5 * HZ;
 	strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
 
@@ -2105,11 +2104,6 @@ static const struct ethtool_ops atl2_ethtool_ops = {
 	.set_eeprom		= atl2_set_eeprom,
 };
 
-static void atl2_set_ethtool_ops(struct net_device *netdev)
-{
-	SET_ETHTOOL_OPS(netdev, &atl2_ethtool_ops);
-}
-
 #define LBYTESWAP(a)  ((((a) & 0x00ff00ff) << 8) | \
 	(((a) & 0xff00ff00) >> 8))
 #define LONGSWAP(a)   ((LBYTESWAP(a) << 16) | (LBYTESWAP(a) >> 16))
-- 
cgit v1.2.2


From 8fa9524d6b5519b6e1d549cb37bbbd10587e3eae Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Sat, 15 Mar 2014 15:29:06 -0700
Subject: 3c509: Call dev_consume_skb_any instead of dev_kfree_skb.

Replace dev_kfree_skb with dev_consume_skb_any in el3_start_xmit
as it can be called in hard irq and other contexts.

dev_consume_skb_any is used as on this simple hardware the
skb is consumed directly by the start_xmit function.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
 drivers/net/ethernet/3com/3c509.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/3com/3c509.c b/drivers/net/ethernet/3com/3c509.c
index c53384d41c96..35df0b9e6848 100644
--- a/drivers/net/ethernet/3com/3c509.c
+++ b/drivers/net/ethernet/3com/3c509.c
@@ -749,7 +749,7 @@ el3_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	spin_unlock_irqrestore(&lp->lock, flags);
 
-	dev_kfree_skb (skb);
+	dev_consume_skb_any (skb);
 
 	/* Clear the Tx status stack. */
 	{
-- 
cgit v1.2.2


From e5ddf351b1b10a1da6b76176f4e1fdce09f90892 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Sat, 15 Mar 2014 15:31:09 -0700
Subject: 3c59x: Call dev_consume_skb_any instead of dev_kfree_skb.

Replace dev_kfree_skb with dev_consume_skb_any in vortex_start_xmit
as it can be called in hard irq and other contexts.

dev_consume_skb_any is used when vortext_start_xmit directly consumes
the packet instead of dmaing it to the device.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
 drivers/net/ethernet/3com/3c59x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/3com/3c59x.c b/drivers/net/ethernet/3com/3c59x.c
index 238ccea965c8..61477b8e8d24 100644
--- a/drivers/net/ethernet/3com/3c59x.c
+++ b/drivers/net/ethernet/3com/3c59x.c
@@ -2086,7 +2086,7 @@ vortex_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		/* ... and the packet rounded to a doubleword. */
 		skb_tx_timestamp(skb);
 		iowrite32_rep(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2);
-		dev_kfree_skb (skb);
+		dev_consume_skb_any (skb);
 		if (ioread16(ioaddr + TxFree) > 1536) {
 			netif_start_queue (dev);	/* AKPM: redundant? */
 		} else {
-- 
cgit v1.2.2


From e05b310198f2ff513ad6654176e0e263088f9500 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Sat, 15 Mar 2014 15:34:00 -0700
Subject: 8390: Call dev_consume_skb_any instead of dev_kfree_skb.

Replace dev_kfree_skb with dev_consume_skb_any in __ei_start_xmit that
can be called in hard irq and other contexts.

dev_consume_skb is used as in this simple driver the skb is always
immediately consumed, there are no drops.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
 drivers/net/ethernet/8390/lib8390.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/8390/lib8390.c b/drivers/net/ethernet/8390/lib8390.c
index d2cd80444ade..599311f0e05c 100644
--- a/drivers/net/ethernet/8390/lib8390.c
+++ b/drivers/net/ethernet/8390/lib8390.c
@@ -404,7 +404,7 @@ static netdev_tx_t __ei_start_xmit(struct sk_buff *skb,
 	spin_unlock(&ei_local->page_lock);
 	enable_irq_lockdep_irqrestore(dev->irq, &flags);
 	skb_tx_timestamp(skb);
-	dev_kfree_skb(skb);
+	dev_consume_skb_any(skb);
 	dev->stats.tx_bytes += send_length;
 
 	return NETDEV_TX_OK;
-- 
cgit v1.2.2


From 21534d20fe6f7108f7f4eaaf47f138e20e6c85c9 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Sat, 15 Mar 2014 15:37:24 -0700
Subject: bfin_mac: Call dev_consume_skb_any instead of dev_kfree_skb.

Replace dev_kfree_skb with dev_consume_skb_any in _tx_reclaim_skb that
can be called in hard irq and other contexts.

dev_consume_skb is used as _tx_reclaim_skb is called after a packet
has been successfully transmitted.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
 drivers/net/ethernet/adi/bfin_mac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/adi/bfin_mac.c b/drivers/net/ethernet/adi/bfin_mac.c
index 83a8cdbcd936..95779b6b7394 100644
--- a/drivers/net/ethernet/adi/bfin_mac.c
+++ b/drivers/net/ethernet/adi/bfin_mac.c
@@ -1087,7 +1087,7 @@ static inline void _tx_reclaim_skb(void)
 		tx_list_head->desc_a.config &= ~DMAEN;
 		tx_list_head->status.status_word = 0;
 		if (tx_list_head->skb) {
-			dev_kfree_skb(tx_list_head->skb);
+			dev_consume_skb_any(tx_list_head->skb);
 			tx_list_head->skb = NULL;
 		}
 		tx_list_head = tx_list_head->next;
-- 
cgit v1.2.2


From c99abc8b39d8281dad04d771bb7a2de36fec4d9f Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Mon, 24 Mar 2014 21:13:02 -0700
Subject: sun4i-emac: Call dev_consume_skb_any instead of dev_kfree_skb.

Replace dev_kfree_skb with dev_consume_skb_any in emacs_start_xmit
which can be called in hard irq and other contexts.

emac_start_xmit always transmits the packet making dev_consume_skb
the appropriate function to call.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
 drivers/net/ethernet/allwinner/sun4i-emac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/allwinner/sun4i-emac.c b/drivers/net/ethernet/allwinner/sun4i-emac.c
index 511f6eecd58b..fcaeeb8a4929 100644
--- a/drivers/net/ethernet/allwinner/sun4i-emac.c
+++ b/drivers/net/ethernet/allwinner/sun4i-emac.c
@@ -476,7 +476,7 @@ static int emac_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	spin_unlock_irqrestore(&db->lock, flags);
 
 	/* free this SKB */
-	dev_kfree_skb(skb);
+	dev_consume_skb_any(skb);
 
 	return NETDEV_TX_OK;
 }
-- 
cgit v1.2.2


From e21106b41209c57d0138b43732d623595d529455 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Mon, 24 Mar 2014 21:18:40 -0700
Subject: am79c961a: Call dev_consume_skb_any instead of dev_kfree_skb.

Replace dev_kfree_skb with dev_consume_skb_any in am79c961 that can
be called in hard irq and other contexts.

dev_consume_skb_any is used as am79c961_sendpacket always
immediately consumes the skb.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
 drivers/net/ethernet/amd/am79c961a.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/amd/am79c961a.c b/drivers/net/ethernet/amd/am79c961a.c
index 9793767996a2..87e727b921dc 100644
--- a/drivers/net/ethernet/amd/am79c961a.c
+++ b/drivers/net/ethernet/amd/am79c961a.c
@@ -472,7 +472,7 @@ am79c961_sendpacket(struct sk_buff *skb, struct net_device *dev)
 	if (am_readword(dev, priv->txhdr + (priv->txhead << 3) + 2) & TMD_OWN)
 		netif_stop_queue(dev);
 
-	dev_kfree_skb(skb);
+	dev_consume_skb_any(skb);
 
 	return NETDEV_TX_OK;
 }
-- 
cgit v1.2.2


From 37392c7b84144ba72b185682791d4a4ad084de28 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Sat, 15 Mar 2014 15:48:50 -0700
Subject: lance: Call dev_consume_skb_any instead of dev_kfree_skb.

Replace dev_kfree_skb with dev_consume_skb_any in lance_start_xmit
that can be called in hard irq and other contexts.

dev_consume_skb_any is used as lance_start_xmit always immediately
consumes the skb.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
 drivers/net/ethernet/amd/7990.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/amd/7990.c b/drivers/net/ethernet/amd/7990.c
index 18e542f7853d..98a10d555b79 100644
--- a/drivers/net/ethernet/amd/7990.c
+++ b/drivers/net/ethernet/amd/7990.c
@@ -578,7 +578,7 @@ int lance_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	outs++;
 	/* Kick the lance: transmit now */
 	WRITERDP(lp, LE_C0_INEA | LE_C0_TDMD);
-	dev_kfree_skb(skb);
+	dev_consume_skb_any(skb);
 
 	spin_lock_irqsave(&lp->devlock, flags);
 	if (TX_BUFFS_AVAIL)
-- 
cgit v1.2.2


From af9ba92cb2e8874ec35055212b15be044cb96e3c Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Sat, 15 Mar 2014 15:49:08 -0700
Subject: pcnet32: Call dev_kfree_skb_any instead of dev_kfree_skb.

Replace dev_kfree_skb with dev_kfree_skb_any in pcnet32_start_xmit
that can be called in hard irq and other contexts.

dev_kfree_skb_any is used as pcnet32_start_xmit only frees an
skb when it drops a packet during transmit.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
 drivers/net/ethernet/amd/pcnet32.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/amd/pcnet32.c b/drivers/net/ethernet/amd/pcnet32.c
index 2ae00ed83afa..e7cc9174e364 100644
--- a/drivers/net/ethernet/amd/pcnet32.c
+++ b/drivers/net/ethernet/amd/pcnet32.c
@@ -2448,7 +2448,7 @@ static netdev_tx_t pcnet32_start_xmit(struct sk_buff *skb,
 	lp->tx_dma_addr[entry] =
 	    pci_map_single(lp->pci_dev, skb->data, skb->len, PCI_DMA_TODEVICE);
 	if (pci_dma_mapping_error(lp->pci_dev, lp->tx_dma_addr[entry])) {
-		dev_kfree_skb(skb);
+		dev_kfree_skb_any(skb);
 		dev->stats.tx_dropped++;
 		goto drop_packet;
 	}
-- 
cgit v1.2.2


From 548ff1ed7d251a5de40e2dfb3ec5f317ee834082 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Sat, 15 Mar 2014 15:53:09 -0700
Subject: alx: Call dev_kfree_skb_any instead of dev_kfree_skb.

Replace dev_kfree_skb with dev_kfree_skb_any in alx_start_xmit that
can be called in hard irq and other contexts.

dev_kfree_skb_any is used as alx_start_xmit only frees skbs
when dropping them.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
 drivers/net/ethernet/atheros/alx/main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/atheros/alx/main.c b/drivers/net/ethernet/atheros/alx/main.c
index 2e45f6ec1bf0..238356108e65 100644
--- a/drivers/net/ethernet/atheros/alx/main.c
+++ b/drivers/net/ethernet/atheros/alx/main.c
@@ -1097,7 +1097,7 @@ static netdev_tx_t alx_start_xmit(struct sk_buff *skb,
 	return NETDEV_TX_OK;
 
 drop:
-	dev_kfree_skb(skb);
+	dev_kfree_skb_any(skb);
 	return NETDEV_TX_OK;
 }
 
-- 
cgit v1.2.2


From 07641c8fa45774d5e99f4bdc8c37a7d174a2e973 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Sat, 15 Mar 2014 15:58:10 -0700
Subject: atl1c: Call dev_kfree/consume_skb_any instead of dev_kfree_skb.

The call path: atl1c_xmit_frame, atlc_tx_rollback, atl1c_clean_buffer
can not be tell at compile time if it will be invoked from hard irq
or other context, as atl1c_xmit_frame does not know.  So remove
the logic that  passes the compile time knowledge into al1c_clean_buffer
and figure out it out at runtime with dev_consume_skb_any.

Replace dev_kfree_skb with dev_kfree_skb_any in atl1c_xmit_frame that
can be called in hard irq and other contexts.

Replace dev_kfree_skb and dev_kfree_skb_irq with dev_consume_skb_any
in atl1c_clean_buffer that can be called in hard irq and other
contexts.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
 drivers/net/ethernet/atheros/atl1c/atl1c_main.c | 20 ++++++++------------
 1 file changed, 8 insertions(+), 12 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
index 4d3258dd0a88..31f262302128 100644
--- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
@@ -832,7 +832,7 @@ static int atl1c_sw_init(struct atl1c_adapter *adapter)
 }
 
 static inline void atl1c_clean_buffer(struct pci_dev *pdev,
-				struct atl1c_buffer *buffer_info, int in_irq)
+				struct atl1c_buffer *buffer_info)
 {
 	u16 pci_driection;
 	if (buffer_info->flags & ATL1C_BUFFER_FREE)
@@ -850,12 +850,8 @@ static inline void atl1c_clean_buffer(struct pci_dev *pdev,
 			pci_unmap_page(pdev, buffer_info->dma,
 					buffer_info->length, pci_driection);
 	}
-	if (buffer_info->skb) {
-		if (in_irq)
-			dev_kfree_skb_irq(buffer_info->skb);
-		else
-			dev_kfree_skb(buffer_info->skb);
-	}
+	if (buffer_info->skb)
+		dev_consume_skb_any(buffer_info->skb);
 	buffer_info->dma = 0;
 	buffer_info->skb = NULL;
 	ATL1C_SET_BUFFER_STATE(buffer_info, ATL1C_BUFFER_FREE);
@@ -875,7 +871,7 @@ static void atl1c_clean_tx_ring(struct atl1c_adapter *adapter,
 	ring_count = tpd_ring->count;
 	for (index = 0; index < ring_count; index++) {
 		buffer_info = &tpd_ring->buffer_info[index];
-		atl1c_clean_buffer(pdev, buffer_info, 0);
+		atl1c_clean_buffer(pdev, buffer_info);
 	}
 
 	/* Zero out Tx-buffers */
@@ -899,7 +895,7 @@ static void atl1c_clean_rx_ring(struct atl1c_adapter *adapter)
 
 	for (j = 0; j < rfd_ring->count; j++) {
 		buffer_info = &rfd_ring->buffer_info[j];
-		atl1c_clean_buffer(pdev, buffer_info, 0);
+		atl1c_clean_buffer(pdev, buffer_info);
 	}
 	/* zero out the descriptor ring */
 	memset(rfd_ring->desc, 0, rfd_ring->size);
@@ -1562,7 +1558,7 @@ static bool atl1c_clean_tx_irq(struct atl1c_adapter *adapter,
 
 	while (next_to_clean != hw_next_to_clean) {
 		buffer_info = &tpd_ring->buffer_info[next_to_clean];
-		atl1c_clean_buffer(pdev, buffer_info, 1);
+		atl1c_clean_buffer(pdev, buffer_info);
 		if (++next_to_clean == tpd_ring->count)
 			next_to_clean = 0;
 		atomic_set(&tpd_ring->next_to_clean, next_to_clean);
@@ -2085,7 +2081,7 @@ static void atl1c_tx_rollback(struct atl1c_adapter *adpt,
 	while (index != tpd_ring->next_to_use) {
 		tpd = ATL1C_TPD_DESC(tpd_ring, index);
 		buffer_info = &tpd_ring->buffer_info[index];
-		atl1c_clean_buffer(adpt->pdev, buffer_info, 0);
+		atl1c_clean_buffer(adpt->pdev, buffer_info);
 		memset(tpd, 0, sizeof(struct atl1c_tpd_desc));
 		if (++index == tpd_ring->count)
 			index = 0;
@@ -2258,7 +2254,7 @@ static netdev_tx_t atl1c_xmit_frame(struct sk_buff *skb,
 		/* roll back tpd/buffer */
 		atl1c_tx_rollback(adapter, tpd, type);
 		spin_unlock_irqrestore(&adapter->tx_lock, flags);
-		dev_kfree_skb(skb);
+		dev_kfree_skb_any(skb);
 	} else {
 		atl1c_tx_queue(adapter, skb, tpd, type);
 		spin_unlock_irqrestore(&adapter->tx_lock, flags);
-- 
cgit v1.2.2


From 27400df8e92b0e2934ef9de8eb7a08e7e490b784 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Sat, 15 Mar 2014 16:06:40 -0700
Subject: bnad: Call dev_kfree_skb_any instead of dev_kfree_skb.

Replace dev_kfree_skb with dev_kfree_skb_any in bnad_start_xmit that
can be called in hard irq and other contexts.

dev_kfree_skb_any is used as bnad_start_xmit only frees skbs when to
drop them, normally transmitted packets are handled elsewhere.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
 drivers/net/ethernet/brocade/bna/bnad.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/brocade/bna/bnad.c b/drivers/net/ethernet/brocade/bna/bnad.c
index cb7625366ec2..a881e982a084 100644
--- a/drivers/net/ethernet/brocade/bna/bnad.c
+++ b/drivers/net/ethernet/brocade/bna/bnad.c
@@ -2946,17 +2946,17 @@ bnad_start_xmit(struct sk_buff *skb, struct net_device *netdev)
 	/* Sanity checks for the skb */
 
 	if (unlikely(skb->len <= ETH_HLEN)) {
-		dev_kfree_skb(skb);
+		dev_kfree_skb_any(skb);
 		BNAD_UPDATE_CTR(bnad, tx_skb_too_short);
 		return NETDEV_TX_OK;
 	}
 	if (unlikely(len > BFI_TX_MAX_DATA_PER_VECTOR)) {
-		dev_kfree_skb(skb);
+		dev_kfree_skb_any(skb);
 		BNAD_UPDATE_CTR(bnad, tx_skb_headlen_zero);
 		return NETDEV_TX_OK;
 	}
 	if (unlikely(len == 0)) {
-		dev_kfree_skb(skb);
+		dev_kfree_skb_any(skb);
 		BNAD_UPDATE_CTR(bnad, tx_skb_headlen_zero);
 		return NETDEV_TX_OK;
 	}
@@ -2968,7 +2968,7 @@ bnad_start_xmit(struct sk_buff *skb, struct net_device *netdev)
 	 * and the netif_tx_stop_all_queues() call.
 	 */
 	if (unlikely(!tcb || !test_bit(BNAD_TXQ_TX_STARTED, &tcb->flags))) {
-		dev_kfree_skb(skb);
+		dev_kfree_skb_any(skb);
 		BNAD_UPDATE_CTR(bnad, tx_skb_stopping);
 		return NETDEV_TX_OK;
 	}
@@ -2981,7 +2981,7 @@ bnad_start_xmit(struct sk_buff *skb, struct net_device *netdev)
 	wis = BNA_TXQ_WI_NEEDED(vectors);	/* 4 vectors per work item */
 
 	if (unlikely(vectors > BFI_TX_MAX_VECTORS_PER_PKT)) {
-		dev_kfree_skb(skb);
+		dev_kfree_skb_any(skb);
 		BNAD_UPDATE_CTR(bnad, tx_skb_max_vectors);
 		return NETDEV_TX_OK;
 	}
@@ -3021,7 +3021,7 @@ bnad_start_xmit(struct sk_buff *skb, struct net_device *netdev)
 
 	/* Program the opcode, flags, frame_len, num_vectors in WI */
 	if (bnad_txq_wi_prepare(bnad, tcb, skb, txqent)) {
-		dev_kfree_skb(skb);
+		dev_kfree_skb_any(skb);
 		return NETDEV_TX_OK;
 	}
 	txqent->hdr.wi.reserved = 0;
@@ -3047,7 +3047,7 @@ bnad_start_xmit(struct sk_buff *skb, struct net_device *netdev)
 			/* Undo the changes starting at tcb->producer_index */
 			bnad_tx_buff_unmap(bnad, unmap_q, q_depth,
 				tcb->producer_index);
-			dev_kfree_skb(skb);
+			dev_kfree_skb_any(skb);
 			BNAD_UPDATE_CTR(bnad, tx_skb_frag_zero);
 			return NETDEV_TX_OK;
 		}
@@ -3076,7 +3076,7 @@ bnad_start_xmit(struct sk_buff *skb, struct net_device *netdev)
 	if (unlikely(len != skb->len)) {
 		/* Undo the changes starting at tcb->producer_index */
 		bnad_tx_buff_unmap(bnad, unmap_q, q_depth, tcb->producer_index);
-		dev_kfree_skb(skb);
+		dev_kfree_skb_any(skb);
 		BNAD_UPDATE_CTR(bnad, tx_skb_len_mismatch);
 		return NETDEV_TX_OK;
 	}
-- 
cgit v1.2.2


From c88b5b6a68da1bc4353521bde95246bbc0f85b5e Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Sat, 15 Mar 2014 16:08:27 -0700
Subject: macb: Call dev_kfree_skb_any instead of kfree_skb.

Replace kfree_skb with dev_kfree_skb_any in macb_start_xmit that can
be called in hard irq and other contexts.

macb_start_xmit only frees skbs when dropping them so
dev_kfree_skb_any is used.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
 drivers/net/ethernet/cadence/macb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c
index d0c38e01e99f..6116887d2880 100644
--- a/drivers/net/ethernet/cadence/macb.c
+++ b/drivers/net/ethernet/cadence/macb.c
@@ -1045,7 +1045,7 @@ static int macb_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	mapping = dma_map_single(&bp->pdev->dev, skb->data,
 				 len, DMA_TO_DEVICE);
 	if (dma_mapping_error(&bp->pdev->dev, mapping)) {
-		kfree_skb(skb);
+		dev_kfree_skb_any(skb);
 		goto unlock;
 	}
 
-- 
cgit v1.2.2


From f5cf76ba620fd48538c13ba9bce8a6876b07c7f6 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Sat, 15 Mar 2014 16:10:54 -0700
Subject: xgmac: Call dev_kfree/consume_skb_any instead of dev_kfree_skb.

Replace dev_kfree_skb with dev_consume_skb_any in xgmac_tx_complete
that can be called in hard irq and other contexts.

Replace dev_kfree_skb with dev_kfree_skb_any in xgmac_xmit that can
be called in hard irq and other contexts.

dev_consume_skb_any is used in xgamc_tx_complete as skbs that reach
there have been successfully transmitted, dev_kfree_skby_any is used
in xgmac_xmit as skbs that are freed there are being dropped.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
 drivers/net/ethernet/calxeda/xgmac.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/calxeda/xgmac.c b/drivers/net/ethernet/calxeda/xgmac.c
index d2a183c3a6ce..521dfea44b83 100644
--- a/drivers/net/ethernet/calxeda/xgmac.c
+++ b/drivers/net/ethernet/calxeda/xgmac.c
@@ -897,7 +897,7 @@ static void xgmac_tx_complete(struct xgmac_priv *priv)
 		/* Check tx error on the last segment */
 		if (desc_get_tx_ls(p)) {
 			desc_get_tx_status(priv, p);
-			dev_kfree_skb(skb);
+			dev_consume_skb_any(skb);
 		}
 
 		priv->tx_skbuff[entry] = NULL;
@@ -1105,7 +1105,7 @@ static netdev_tx_t xgmac_xmit(struct sk_buff *skb, struct net_device *dev)
 	len = skb_headlen(skb);
 	paddr = dma_map_single(priv->device, skb->data, len, DMA_TO_DEVICE);
 	if (dma_mapping_error(priv->device, paddr)) {
-		dev_kfree_skb(skb);
+		dev_kfree_skb_any(skb);
 		return NETDEV_TX_OK;
 	}
 	priv->tx_skbuff[entry] = skb;
@@ -1169,7 +1169,7 @@ dma_err:
 	desc = first;
 	dma_unmap_single(priv->device, desc_get_buf_addr(desc),
 			 desc_get_buf_len(desc), DMA_TO_DEVICE);
-	dev_kfree_skb(skb);
+	dev_kfree_skb_any(skb);
 	return NETDEV_TX_OK;
 }
 
-- 
cgit v1.2.2


From f9ec8131bba25d4381c4c7f80dcf8532b864f652 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Sat, 15 Mar 2014 16:23:31 -0700
Subject: cxgb3: Call dev_kfree/consume_skb_any instead of [dev_]kfree_skb.

Replace kfree_skb with dev_consume_skb_any in free_tx_desc, and
write_tx_pkt_wr that can be called in hard irq and other contexts.

Replace dev_kfree_skb with dev_kfree_skb_any in t3_eth_xmit that can
be called in hard irq and other contexts.

dev_kfree_skb is replaced with dev_kfree_skb_any in t3_eth_xmit as
that location is a packet drop, while kfree_skb in free_tx_desc,
and in write_tx_pkt_wr are places where packets are consumed
in a healthy manner.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
 drivers/net/ethernet/chelsio/cxgb3/sge.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/chelsio/cxgb3/sge.c b/drivers/net/ethernet/chelsio/cxgb3/sge.c
index 632b318eb38a..8b069f96e920 100644
--- a/drivers/net/ethernet/chelsio/cxgb3/sge.c
+++ b/drivers/net/ethernet/chelsio/cxgb3/sge.c
@@ -298,7 +298,7 @@ static void free_tx_desc(struct adapter *adapter, struct sge_txq *q,
 			if (need_unmap)
 				unmap_skb(d->skb, q, cidx, pdev);
 			if (d->eop) {
-				kfree_skb(d->skb);
+				dev_consume_skb_any(d->skb);
 				d->skb = NULL;
 			}
 		}
@@ -1188,7 +1188,7 @@ static void write_tx_pkt_wr(struct adapter *adap, struct sk_buff *skb,
 			cpl->wr.wr_lo = htonl(V_WR_LEN(flits) | V_WR_GEN(gen) |
 					      V_WR_TID(q->token));
 			wr_gen2(d, gen);
-			kfree_skb(skb);
+			dev_consume_skb_any(skb);
 			return;
 		}
 
@@ -1233,7 +1233,7 @@ netdev_tx_t t3_eth_xmit(struct sk_buff *skb, struct net_device *dev)
 	 * anything shorter than an Ethernet header.
 	 */
 	if (unlikely(skb->len < ETH_HLEN)) {
-		dev_kfree_skb(skb);
+		dev_kfree_skb_any(skb);
 		return NETDEV_TX_OK;
 	}
 
-- 
cgit v1.2.2


From a7525198a85102034a442fba75352754bd439c2b Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Sat, 15 Mar 2014 16:29:49 -0700
Subject: cxgb4: Call dev_kfree/consume_skb_any instead of [dev_]kfree_skb.

Replace kfree_skb with dev_consume_skb_any in free_tx_desc that can be
called in hard irq and other contexts. dev_consume_skb_any is used
as this function consumes successfully transmitted skbs.

Replace dev_kfree_skb with dev_kfree_skb_any in t4_eth_xmit that can
be called in hard irq and other contexts, on paths that drop the skb.

Replace dev_kfree_skb with dev_consume_skb_any in t4_eth_xmit that can
be called in hard irq and other contexts, on paths that successfully
transmit the skb.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
 drivers/net/ethernet/chelsio/cxgb4/sge.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/chelsio/cxgb4/sge.c b/drivers/net/ethernet/chelsio/cxgb4/sge.c
index d4db382ff8c7..ca95cf2954eb 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/sge.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/sge.c
@@ -383,7 +383,7 @@ static void free_tx_desc(struct adapter *adap, struct sge_txq *q,
 		if (d->skb) {                       /* an SGL is present */
 			if (unmap)
 				unmap_sgl(dev, d->skb, d->sgl, q);
-			kfree_skb(d->skb);
+			dev_consume_skb_any(d->skb);
 			d->skb = NULL;
 		}
 		++d;
@@ -1009,7 +1009,7 @@ netdev_tx_t t4_eth_xmit(struct sk_buff *skb, struct net_device *dev)
 	 * anything shorter than an Ethernet header.
 	 */
 	if (unlikely(skb->len < ETH_HLEN)) {
-out_free:	dev_kfree_skb(skb);
+out_free:	dev_kfree_skb_any(skb);
 		return NETDEV_TX_OK;
 	}
 
@@ -1104,7 +1104,7 @@ out_free:	dev_kfree_skb(skb);
 
 	if (immediate) {
 		inline_tx_skb(skb, &q->q, cpl + 1);
-		dev_kfree_skb(skb);
+		dev_consume_skb_any(skb);
 	} else {
 		int last_desc;
 
-- 
cgit v1.2.2


From 42ffda5fe704ab6a3ef8ca36b5f958a3cd86a164 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Sat, 15 Mar 2014 16:31:32 -0700
Subject: cxfb4vf: Call dev_kfree/consume_skb_any instead of [dev_]kfree_skb.

Replace kfree_skb with dev_consume_skb_any in free_tx_desc that can be
called in hard irq and other contexts. dev_consume_skb_any is used
as this function consumes successfully transmitted skbs.

Replace dev_kfree_skb with dev_kfree_skb_any in t4vf_eth_xmit that can
be called in hard irq and other contexts, on paths that drop the skb.

Replace dev_kfree_skb with dev_consume_skb_any in t4vf_eth_xmit that can
be called in hard irq and other contexts, on paths that successfully
transmit the skb.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
 drivers/net/ethernet/chelsio/cxgb4vf/sge.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/sge.c b/drivers/net/ethernet/chelsio/cxgb4vf/sge.c
index 0a89963c48ce..9cfa4b4bb089 100644
--- a/drivers/net/ethernet/chelsio/cxgb4vf/sge.c
+++ b/drivers/net/ethernet/chelsio/cxgb4vf/sge.c
@@ -401,7 +401,7 @@ static void free_tx_desc(struct adapter *adapter, struct sge_txq *tq,
 		if (sdesc->skb) {
 			if (need_unmap)
 				unmap_sgl(dev, sdesc->skb, sdesc->sgl, tq);
-			kfree_skb(sdesc->skb);
+			dev_consume_skb_any(sdesc->skb);
 			sdesc->skb = NULL;
 		}
 
@@ -1275,7 +1275,7 @@ int t4vf_eth_xmit(struct sk_buff *skb, struct net_device *dev)
 		 * need it any longer.
 		 */
 		inline_tx_skb(skb, &txq->q, cpl + 1);
-		dev_kfree_skb(skb);
+		dev_consume_skb_any(skb);
 	} else {
 		/*
 		 * Write the skb's Scatter/Gather list into the TX Packet CPL
@@ -1354,7 +1354,7 @@ out_free:
 	 * An error of some sort happened.  Free the TX skb and tell the
 	 * OS that we've "dealt" with the packet ...
 	 */
-	dev_kfree_skb(skb);
+	dev_kfree_skb_any(skb);
 	return NETDEV_TX_OK;
 }
 
-- 
cgit v1.2.2


From d6bea829ca783d96087a71990d9298583c81d8b0 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Sat, 15 Mar 2014 16:45:46 -0700
Subject: cs89x0: Call dev_consume_skb_any instead of dev_kfree_skb.

Replace dev_kfree_skb with dev_consume_skb_any in net_send_packet that
can be called in hard irq and other contexts.

net_send_packet consumes (not drops) the skb of interest.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
 drivers/net/ethernet/cirrus/cs89x0.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/cirrus/cs89x0.c b/drivers/net/ethernet/cirrus/cs89x0.c
index 19f642a45f40..fe84fbabc0d4 100644
--- a/drivers/net/ethernet/cirrus/cs89x0.c
+++ b/drivers/net/ethernet/cirrus/cs89x0.c
@@ -1174,7 +1174,7 @@ static netdev_tx_t net_send_packet(struct sk_buff *skb, struct net_device *dev)
 	writewords(lp, TX_FRAME_PORT, skb->data, (skb->len + 1) >> 1);
 	spin_unlock_irqrestore(&lp->lock, flags);
 	dev->stats.tx_bytes += skb->len;
-	dev_kfree_skb(skb);
+	dev_consume_skb_any(skb);
 
 	/* We DO NOT call netif_wake_queue() here.
 	 * We also DO NOT call netif_start_queue().
-- 
cgit v1.2.2


From 98d8a65d106bab634ea6ed66d8fad8d60a4d6d99 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Sat, 15 Mar 2014 16:49:05 -0700
Subject: enic: Call dev_kfree_skb_any instead of dev_kfree_skb.

Replace dev_kfree_skb with dev_kfree_skb_any in enic_hard_start_xmit
that can be called in hard irq and other contexts.

enic_hard_start_xmit only frees the skb when dropping it.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
 drivers/net/ethernet/cisco/enic/enic_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/cisco/enic/enic_main.c b/drivers/net/ethernet/cisco/enic/enic_main.c
index 4c35fc8fad99..2945718ce806 100644
--- a/drivers/net/ethernet/cisco/enic/enic_main.c
+++ b/drivers/net/ethernet/cisco/enic/enic_main.c
@@ -521,7 +521,7 @@ static netdev_tx_t enic_hard_start_xmit(struct sk_buff *skb,
 	unsigned int txq_map;
 
 	if (skb->len <= 0) {
-		dev_kfree_skb(skb);
+		dev_kfree_skb_any(skb);
 		return NETDEV_TX_OK;
 	}
 
@@ -536,7 +536,7 @@ static netdev_tx_t enic_hard_start_xmit(struct sk_buff *skb,
 	if (skb_shinfo(skb)->gso_size == 0 &&
 	    skb_shinfo(skb)->nr_frags + 1 > ENIC_NON_TSO_MAX_DESC &&
 	    skb_linearize(skb)) {
-		dev_kfree_skb(skb);
+		dev_kfree_skb_any(skb);
 		return NETDEV_TX_OK;
 	}
 
-- 
cgit v1.2.2


From 2c3d0bc0278746a073aadd6e2af6794adcc1e7d7 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Sat, 15 Mar 2014 16:53:09 -0700
Subject: dm9000: Call dev_consume_skb_any instead of dev_kfree_skb.

Replace dev_kfree_skb with dev_consume_skb_any in dm9000_start_xmit
that can be called in hard irq and other contexts, on the path
that successfully transmits the packet.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
 drivers/net/ethernet/davicom/dm9000.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/davicom/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c
index a1a2b4028a5c..8c4b93be333b 100644
--- a/drivers/net/ethernet/davicom/dm9000.c
+++ b/drivers/net/ethernet/davicom/dm9000.c
@@ -1033,7 +1033,7 @@ dm9000_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	spin_unlock_irqrestore(&db->lock, flags);
 
 	/* free this SKB */
-	dev_kfree_skb(skb);
+	dev_consume_skb_any(skb);
 
 	return NETDEV_TX_OK;
 }
-- 
cgit v1.2.2


From 086dfb7fadde4400f1473e7e818abf833f0e06c4 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Sat, 15 Mar 2014 16:59:27 -0700
Subject: dmfe: Call dev_kfree/consume_skb_any instead of dev_kfree_skb.

Replace dev_kfree_skb with dev_kfree_skb_any in dmfe_start_xmit that
can be called in hard irq and other contexts, when the packet is
dropped.

Replace dev_kfree_skb with dev_consume_skb_any in dmfe_start_xmit that
can be called in hard irq and other contexts, when the packet is
transmitted.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
 drivers/net/ethernet/dec/tulip/dmfe.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/dec/tulip/dmfe.c b/drivers/net/ethernet/dec/tulip/dmfe.c
index 5ad9e3e3c0b8..53f0c618045c 100644
--- a/drivers/net/ethernet/dec/tulip/dmfe.c
+++ b/drivers/net/ethernet/dec/tulip/dmfe.c
@@ -696,7 +696,7 @@ static netdev_tx_t dmfe_start_xmit(struct sk_buff *skb,
 	/* Too large packet check */
 	if (skb->len > MAX_PACKET_SIZE) {
 		pr_err("big packet = %d\n", (u16)skb->len);
-		dev_kfree_skb(skb);
+		dev_kfree_skb_any(skb);
 		return NETDEV_TX_OK;
 	}
 
@@ -743,7 +743,7 @@ static netdev_tx_t dmfe_start_xmit(struct sk_buff *skb,
 	dw32(DCR7, db->cr7_data);
 
 	/* free this SKB */
-	dev_kfree_skb(skb);
+	dev_consume_skb_any(skb);
 
 	return NETDEV_TX_OK;
 }
-- 
cgit v1.2.2


From 290a79dbf7b26677d1f4fef0b2a436910684b564 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Sat, 15 Mar 2014 17:05:27 -0700
Subject: uli526x: Call dev_kfree/consume_skb_any instead of dev_kfree_skb.

Replace dev_kfree_skb with dev_kfree_skb_any in uli562x_start_xmit
that can be called in hard irq and other contexts, when the packet is
dropped.

Replace dev_kfree_skb with dev_consume_skb_any in uli562x_start_xmit
that can be called in hard irq and other contexts, when the packet is
transmitted.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
 drivers/net/ethernet/dec/tulip/uli526x.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/dec/tulip/uli526x.c b/drivers/net/ethernet/dec/tulip/uli526x.c
index aa4ee385091f..aa801a6af7b9 100644
--- a/drivers/net/ethernet/dec/tulip/uli526x.c
+++ b/drivers/net/ethernet/dec/tulip/uli526x.c
@@ -607,7 +607,7 @@ static netdev_tx_t uli526x_start_xmit(struct sk_buff *skb,
 	/* Too large packet check */
 	if (skb->len > MAX_PACKET_SIZE) {
 		netdev_err(dev, "big packet = %d\n", (u16)skb->len);
-		dev_kfree_skb(skb);
+		dev_kfree_skb_any(skb);
 		return NETDEV_TX_OK;
 	}
 
@@ -648,7 +648,7 @@ static netdev_tx_t uli526x_start_xmit(struct sk_buff *skb,
 	uw32(DCR7, db->cr7_data);
 
 	/* free this SKB */
-	dev_kfree_skb(skb);
+	dev_consume_skb_any(skb);
 
 	return NETDEV_TX_OK;
 }
-- 
cgit v1.2.2


From 36fc210904832ffd5bf1368e03fac549ce8589e8 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Sat, 15 Mar 2014 17:10:50 -0700
Subject: sundance: Call dev_kfree_skb_any instead of dev_kfree_skb.

Replace dev_kfree_skb with dev_kfree_skb_any in start_tx that can
be called in hard irq and other contexts, when the skb is dropped.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
 drivers/net/ethernet/dlink/sundance.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/dlink/sundance.c b/drivers/net/ethernet/dlink/sundance.c
index 113cd799a131..d9e5ca0d48c1 100644
--- a/drivers/net/ethernet/dlink/sundance.c
+++ b/drivers/net/ethernet/dlink/sundance.c
@@ -1137,7 +1137,7 @@ start_tx (struct sk_buff *skb, struct net_device *dev)
 	return NETDEV_TX_OK;
 
 drop_frame:
-	dev_kfree_skb(skb);
+	dev_kfree_skb_any(skb);
 	np->tx_skbuff[entry] = NULL;
 	dev->stats.tx_dropped++;
 	return NETDEV_TX_OK;
-- 
cgit v1.2.2


From 8e7e687452fcabb036c9d3ce1f6df20a9436c9b2 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Sat, 15 Mar 2014 17:12:53 -0700
Subject: fec: Call dev_kfree_skb_any instead of kfree_skb.

Replace kfree_skb with dev_kfree_skb_any in fec_enet_start_xmit that
can be called in hard irq and other contexts, when the packet is
dropped.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
 drivers/net/ethernet/freescale/fec_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 03a351300013..f9f8a589cdef 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -338,7 +338,7 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 
 	/* Protocol checksum off-load for TCP and UDP. */
 	if (fec_enet_clear_csum(skb, ndev)) {
-		kfree_skb(skb);
+		dev_kfree_skb_any(skb);
 		return NETDEV_TX_OK;
 	}
 
-- 
cgit v1.2.2


From 361457415ae2028a27ee679f60be512efe40e083 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Sat, 15 Mar 2014 17:16:22 -0700
Subject: ucc_geth: Call dev_consume_skb_any instead of dev_kfree_skb.

Replace dev_kfree_skb with dev_consume_skb_any in ucc_geth_tx that can
be called in hard irq and other contexts, when processing the
tx completion event.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
 drivers/net/ethernet/freescale/ucc_geth.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c
index 72291a8904a9..c8299c31b21f 100644
--- a/drivers/net/ethernet/freescale/ucc_geth.c
+++ b/drivers/net/ethernet/freescale/ucc_geth.c
@@ -3261,7 +3261,7 @@ static int ucc_geth_tx(struct net_device *dev, u8 txQ)
 
 		dev->stats.tx_packets++;
 
-		dev_kfree_skb(skb);
+		dev_consume_skb_any(skb);
 
 		ugeth->tx_skbuff[txQ][ugeth->skb_dirtytx[txQ]] = NULL;
 		ugeth->skb_dirtytx[txQ] =
-- 
cgit v1.2.2


From 374e29da7c2b86cfc4986a06f0923bdc861c2111 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Sat, 15 Mar 2014 17:20:57 -0700
Subject: i825xx: Call dev_kfree_skb_any instead of dev_kfree_skb.

Replace dev_kfree_skb with dev_kfree_skb_any in i596_start_xmit that
can be called in hard irq and other contexts, when the skb is dropped.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
 drivers/net/ethernet/i825xx/lib82596.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/i825xx/lib82596.c b/drivers/net/ethernet/i825xx/lib82596.c
index 17fca323c143..c984998b34a0 100644
--- a/drivers/net/ethernet/i825xx/lib82596.c
+++ b/drivers/net/ethernet/i825xx/lib82596.c
@@ -993,7 +993,7 @@ static int i596_start_xmit(struct sk_buff *skb, struct net_device *dev)
 				       dev->name));
 		dev->stats.tx_dropped++;
 
-		dev_kfree_skb(skb);
+		dev_kfree_skb_any(skb);
 	} else {
 		if (++lp->next_tx_cmd == TX_RING_SIZE)
 			lp->next_tx_cmd = 0;
-- 
cgit v1.2.2


From cfbe40630745f2e9d4a51250e87a766c9a2907c2 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Sat, 15 Mar 2014 17:25:48 -0700
Subject: ehea: Call dev_consume_skb_any instead of dev_kfree_skb.

Replace dev_kfree_skb with dev_consume_skb_any in functions that can
be called in hard irq and other contexts.

None of the locations was a packet drop so dev_kfree_skb_any is
inappropriate.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
 drivers/net/ethernet/ibm/ehea/ehea_main.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/ibm/ehea/ehea_main.c b/drivers/net/ethernet/ibm/ehea/ehea_main.c
index 7628e0fd8455..538903bf13bc 100644
--- a/drivers/net/ethernet/ibm/ehea/ehea_main.c
+++ b/drivers/net/ethernet/ibm/ehea/ehea_main.c
@@ -490,7 +490,7 @@ static int ehea_refill_rq_def(struct ehea_port_res *pr,
 		skb_arr[index] = skb;
 		tmp_addr = ehea_map_vaddr(skb->data);
 		if (tmp_addr == -1) {
-			dev_kfree_skb(skb);
+			dev_consume_skb_any(skb);
 			q_skba->os_skbs = fill_wqes - i;
 			ret = 0;
 			break;
@@ -856,7 +856,7 @@ static struct ehea_cqe *ehea_proc_cqes(struct ehea_port_res *pr, int my_quota)
 
 			index = EHEA_BMASK_GET(EHEA_WR_ID_INDEX, cqe->wr_id);
 			skb = pr->sq_skba.arr[index];
-			dev_kfree_skb(skb);
+			dev_consume_skb_any(skb);
 			pr->sq_skba.arr[index] = NULL;
 		}
 
@@ -2044,7 +2044,7 @@ static void ehea_xmit3(struct sk_buff *skb, struct net_device *dev,
 		skb_copy_bits(skb, 0, imm_data, skb->len);
 
 	swqe->immediate_data_length = skb->len;
-	dev_kfree_skb(skb);
+	dev_consume_skb_any(skb);
 }
 
 static int ehea_start_xmit(struct sk_buff *skb, struct net_device *dev)
-- 
cgit v1.2.2


From 26faa9d777718380c56419861370c3fe06a78c15 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Sat, 15 Mar 2014 17:29:34 -0700
Subject: ibmveth: Call dev_consume_skb_any instead of dev_kfree_skb.

Replace dev_kfree_skb with dev_consume_skb_any in ibmveth_start_xmit
that can be called in hard irq and other contexts.

In this code path the packet can have either been transmitted
or dropped, dev_consume_skb_any was choosen because that preserves
the existing semantics of the code, and a transmitted packet is
more likely.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
 drivers/net/ethernet/ibm/ibmveth.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/ibm/ibmveth.c b/drivers/net/ethernet/ibm/ibmveth.c
index e75bdfcd1374..c9127562bd22 100644
--- a/drivers/net/ethernet/ibm/ibmveth.c
+++ b/drivers/net/ethernet/ibm/ibmveth.c
@@ -1044,7 +1044,7 @@ retry_bounce:
 			       DMA_TO_DEVICE);
 
 out:
-	dev_kfree_skb(skb);
+	dev_consume_skb_any(skb);
 	return NETDEV_TX_OK;
 
 map_failed_frags:
-- 
cgit v1.2.2


From 2297af4b50704e52bb3035552cd3db3cadc28109 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Sat, 15 Mar 2014 17:32:41 -0700
Subject: jme: Call dev_kfree_skb_any instead of dev_kfree_skb.

Replace dev_kfree_skb with dev_kfree_skb_any in jme_expand_header that
can be called in hard irq and other contexts, on the failure
path where the skb is dropped.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
 drivers/net/ethernet/jme.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/jme.c b/drivers/net/ethernet/jme.c
index f5685c0d0579..14ff8d64257d 100644
--- a/drivers/net/ethernet/jme.c
+++ b/drivers/net/ethernet/jme.c
@@ -2059,7 +2059,7 @@ jme_expand_header(struct jme_adapter *jme, struct sk_buff *skb)
 	if (unlikely(skb_shinfo(skb)->gso_size &&
 			skb_header_cloned(skb) &&
 			pskb_expand_head(skb, 0, 0, GFP_ATOMIC))) {
-		dev_kfree_skb(skb);
+		dev_kfree_skb_any(skb);
 		return -1;
 	}
 
-- 
cgit v1.2.2


From 43f54377481117e41908e689d9515c94aa9c9858 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Sat, 15 Mar 2014 17:36:05 -0700
Subject: mv643xx_eth: Call dev_kfree_skb_any instead of dev_kfree_skb.

Replace dev_kfree_skb with dev_kfree_skb_any in mv643xx_eth_xmit and
txq_submit_skb that can be called in hard irq and other contexts,
on paths where the skbs are dropped.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
 drivers/net/ethernet/marvell/mv643xx_eth.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/marvell/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c
index a2565ce22b7c..b7b8d74c22d9 100644
--- a/drivers/net/ethernet/marvell/mv643xx_eth.c
+++ b/drivers/net/ethernet/marvell/mv643xx_eth.c
@@ -730,7 +730,7 @@ static int txq_submit_skb(struct tx_queue *txq, struct sk_buff *skb)
 		    unlikely(tag_bytes & ~12)) {
 			if (skb_checksum_help(skb) == 0)
 				goto no_csum;
-			kfree_skb(skb);
+			dev_kfree_skb_any(skb);
 			return 1;
 		}
 
@@ -819,7 +819,7 @@ static netdev_tx_t mv643xx_eth_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (txq->tx_ring_size - txq->tx_desc_count < MAX_SKB_FRAGS + 1) {
 		if (net_ratelimit())
 			netdev_err(dev, "tx queue full?!\n");
-		kfree_skb(skb);
+		dev_kfree_skb_any(skb);
 		return NETDEV_TX_OK;
 	}
 
-- 
cgit v1.2.2


From 0b88a8e18e873eb2ac803c4e735162e1b66cafd6 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Sat, 15 Mar 2014 17:38:42 -0700
Subject: skge: Call dev_kfree/consume_skb_any instead of dev_kfree_skb.

Replace dev_kfree_skb with dev_kfree_skb_any skge_xmit_free that can
be called in hard irq and other contexts, on the path that
handles dropped packets.

Replace dev_kfree_skb with dev_consume_skb_any in skge_tx_done that can
be called in hard irq and other contexts, on the path that handles
successfully transmitted skbs.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
 drivers/net/ethernet/marvell/skge.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/marvell/skge.c b/drivers/net/ethernet/marvell/skge.c
index 597846193869..7f81ae66cc89 100644
--- a/drivers/net/ethernet/marvell/skge.c
+++ b/drivers/net/ethernet/marvell/skge.c
@@ -2845,7 +2845,7 @@ mapping_unwind:
 mapping_error:
 	if (net_ratelimit())
 		dev_warn(&hw->pdev->dev, "%s: tx mapping error\n", dev->name);
-	dev_kfree_skb(skb);
+	dev_kfree_skb_any(skb);
 	return NETDEV_TX_OK;
 }
 
@@ -3172,7 +3172,7 @@ static void skge_tx_done(struct net_device *dev)
 			pkts_compl++;
 			bytes_compl += e->skb->len;
 
-			dev_kfree_skb(e->skb);
+			dev_consume_skb_any(e->skb);
 		}
 	}
 	netdev_completed_queue(dev, pkts_compl, bytes_compl);
-- 
cgit v1.2.2


From 2d4186cef9fa5f9aed528723ff8d13c00ae8356d Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Sat, 15 Mar 2014 17:40:17 -0700
Subject: sky2: Call dev_kfree_skb_any instead of dev_kfree_skb.

Replace dev_kfree_skb with dev_kfree_skb_any in sky2_xmit_frame that
can be called in hard irq and other contexts.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
 drivers/net/ethernet/marvell/sky2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c
index d524676fdff4..b81106451a0a 100644
--- a/drivers/net/ethernet/marvell/sky2.c
+++ b/drivers/net/ethernet/marvell/sky2.c
@@ -2002,7 +2002,7 @@ mapping_unwind:
 mapping_error:
 	if (net_ratelimit())
 		dev_warn(&hw->pdev->dev, "%s: tx mapping error\n", dev->name);
-	dev_kfree_skb(skb);
+	dev_kfree_skb_any(skb);
 	return NETDEV_TX_OK;
 }
 
-- 
cgit v1.2.2


From 641e9b73d8c4a5ce1d4b1ead7a377b8c8622e41e Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Mon, 24 Mar 2014 17:41:43 -0700
Subject: ksz884x: Call dev_consume_skb_any instead of dev_kfree_skb.

Replace dev_kfree_skb with dev_consume_skb_any in copy_old_skb that can
be called in hard irq and other contexts.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
 drivers/net/ethernet/micrel/ksz884x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/micrel/ksz884x.c b/drivers/net/ethernet/micrel/ksz884x.c
index ce84dc289c8f..14ac0e2bc09f 100644
--- a/drivers/net/ethernet/micrel/ksz884x.c
+++ b/drivers/net/ethernet/micrel/ksz884x.c
@@ -4832,7 +4832,7 @@ static inline void copy_old_skb(struct sk_buff *old, struct sk_buff *skb)
 	skb->csum = old->csum;
 	skb_set_network_header(skb, ETH_HLEN);
 
-	dev_kfree_skb(old);
+	dev_consume_skb_any(old);
 }
 
 /**
-- 
cgit v1.2.2


From e6d26bd00c0d68cee39bf36aae4db53d33ea05a0 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Sat, 15 Mar 2014 17:47:58 -0700
Subject: s2io: Call dev_kfree_skb_any instead of dev_kfree_skb.

Replace dev_kfree_skb with dev_kfree_skb_any in s2io_xmit that can
be called in hard irq and other contexts.

All instances that are changed are packet drops.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
 drivers/net/ethernet/neterion/s2io.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/neterion/s2io.c b/drivers/net/ethernet/neterion/s2io.c
index d44fdb91808e..a2844ff322c4 100644
--- a/drivers/net/ethernet/neterion/s2io.c
+++ b/drivers/net/ethernet/neterion/s2io.c
@@ -4049,7 +4049,7 @@ static netdev_tx_t s2io_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (!is_s2io_card_up(sp)) {
 		DBG_PRINT(TX_DBG, "%s: Card going down for reset\n",
 			  dev->name);
-		dev_kfree_skb(skb);
+		dev_kfree_skb_any(skb);
 		return NETDEV_TX_OK;
 	}
 
@@ -4122,7 +4122,7 @@ static netdev_tx_t s2io_xmit(struct sk_buff *skb, struct net_device *dev)
 	    ((put_off+1) == queue_len ? 0 : (put_off+1)) == get_off) {
 		DBG_PRINT(TX_DBG, "Error in xmit, No free TXDs.\n");
 		s2io_stop_tx_queue(sp, fifo->fifo_no);
-		dev_kfree_skb(skb);
+		dev_kfree_skb_any(skb);
 		spin_unlock_irqrestore(&fifo->tx_lock, flags);
 		return NETDEV_TX_OK;
 	}
@@ -4244,7 +4244,7 @@ pci_map_failed:
 	swstats->pci_map_fail_cnt++;
 	s2io_stop_tx_queue(sp, fifo->fifo_no);
 	swstats->mem_freed += skb->truesize;
-	dev_kfree_skb(skb);
+	dev_kfree_skb_any(skb);
 	spin_unlock_irqrestore(&fifo->tx_lock, flags);
 	return NETDEV_TX_OK;
 }
-- 
cgit v1.2.2


From 6956d73aaf28d1449bc1222a0b2e997273cbf520 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Sat, 15 Mar 2014 17:51:57 -0700
Subject: vxge: Call dev_kfree_skb_any instead of dev_kfree_skb.

Replace dev_kfree_skb with dev_kfree_skb_any in vxge_xmit that can
be called in hard irq and other contexts.

vxge_xmit only calls dev_kfree_skb_any when errors result in dropping
skbs.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
 drivers/net/ethernet/neterion/vxge/vxge-main.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/neterion/vxge/vxge-main.c b/drivers/net/ethernet/neterion/vxge/vxge-main.c
index 11adc89959c1..d107bcbb8543 100644
--- a/drivers/net/ethernet/neterion/vxge/vxge-main.c
+++ b/drivers/net/ethernet/neterion/vxge/vxge-main.c
@@ -824,7 +824,7 @@ vxge_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (unlikely(skb->len <= 0)) {
 		vxge_debug_tx(VXGE_ERR,
 			"%s: Buffer has no data..", dev->name);
-		dev_kfree_skb(skb);
+		dev_kfree_skb_any(skb);
 		return NETDEV_TX_OK;
 	}
 
@@ -833,7 +833,7 @@ vxge_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (unlikely(!is_vxge_card_up(vdev))) {
 		vxge_debug_tx(VXGE_ERR,
 			"%s: vdev not initialized", dev->name);
-		dev_kfree_skb(skb);
+		dev_kfree_skb_any(skb);
 		return NETDEV_TX_OK;
 	}
 
@@ -843,7 +843,7 @@ vxge_xmit(struct sk_buff *skb, struct net_device *dev)
 			vxge_debug_tx(VXGE_ERR,
 				"%s: Failed to store the mac address",
 				dev->name);
-			dev_kfree_skb(skb);
+			dev_kfree_skb_any(skb);
 			return NETDEV_TX_OK;
 		}
 	}
@@ -990,7 +990,7 @@ _exit1:
 	vxge_hw_fifo_txdl_free(fifo_hw, dtr);
 _exit0:
 	netif_tx_stop_queue(fifo->txq);
-	dev_kfree_skb(skb);
+	dev_kfree_skb_any(skb);
 
 	return NETDEV_TX_OK;
 }
-- 
cgit v1.2.2


From 1616566c4fa590d4b2011458408a8b39cd46bcc1 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Sat, 15 Mar 2014 17:54:27 -0700
Subject: forcedeth: Call dev_kfree_skb_any instead of kfree_skb.

Replace kfree_skb with dev_kfree_skb_any in functions that can
be called in hard irq and other contexts.

Every location changes is a drop making dev_kfree_skby_any appropriate.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
 drivers/net/ethernet/nvidia/forcedeth.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/nvidia/forcedeth.c b/drivers/net/ethernet/nvidia/forcedeth.c
index 811be0bccd14..fddb464aeab3 100644
--- a/drivers/net/ethernet/nvidia/forcedeth.c
+++ b/drivers/net/ethernet/nvidia/forcedeth.c
@@ -2231,7 +2231,7 @@ static netdev_tx_t nv_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		if (pci_dma_mapping_error(np->pci_dev,
 					  np->put_tx_ctx->dma)) {
 			/* on DMA mapping error - drop the packet */
-			kfree_skb(skb);
+			dev_kfree_skb_any(skb);
 			u64_stats_update_begin(&np->swstats_tx_syncp);
 			np->stat_tx_dropped++;
 			u64_stats_update_end(&np->swstats_tx_syncp);
@@ -2277,7 +2277,7 @@ static netdev_tx_t nv_start_xmit(struct sk_buff *skb, struct net_device *dev)
 					if (unlikely(tmp_tx_ctx++ == np->last_tx_ctx))
 						tmp_tx_ctx = np->first_tx_ctx;
 				} while (tmp_tx_ctx != np->put_tx_ctx);
-				kfree_skb(skb);
+				dev_kfree_skb_any(skb);
 				np->put_tx_ctx = start_tx_ctx;
 				u64_stats_update_begin(&np->swstats_tx_syncp);
 				np->stat_tx_dropped++;
@@ -2380,7 +2380,7 @@ static netdev_tx_t nv_start_xmit_optimized(struct sk_buff *skb,
 		if (pci_dma_mapping_error(np->pci_dev,
 					  np->put_tx_ctx->dma)) {
 			/* on DMA mapping error - drop the packet */
-			kfree_skb(skb);
+			dev_kfree_skb_any(skb);
 			u64_stats_update_begin(&np->swstats_tx_syncp);
 			np->stat_tx_dropped++;
 			u64_stats_update_end(&np->swstats_tx_syncp);
@@ -2427,7 +2427,7 @@ static netdev_tx_t nv_start_xmit_optimized(struct sk_buff *skb,
 					if (unlikely(tmp_tx_ctx++ == np->last_tx_ctx))
 						tmp_tx_ctx = np->first_tx_ctx;
 				} while (tmp_tx_ctx != np->put_tx_ctx);
-				kfree_skb(skb);
+				dev_kfree_skb_any(skb);
 				np->put_tx_ctx = start_tx_ctx;
 				u64_stats_update_begin(&np->swstats_tx_syncp);
 				np->stat_tx_dropped++;
-- 
cgit v1.2.2


From 9ebeac55b980b1185b1e2407449b24673f5322bf Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Sat, 15 Mar 2014 18:01:13 -0700
Subject: sc92031: Call dev_consume_skb_any instead of dev_kfree_skb.

Replace dev_kfree_skb with dev_consume_skb_any in sc92031_start_xmit
that can be called in hard irq and other contexts.

Using dev_consume_skb_any preserves the current semantics (as
dev_kfree_skb is just consume_skb) and since packet drops
are rare is usually accurate.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
 drivers/net/ethernet/silan/sc92031.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/silan/sc92031.c b/drivers/net/ethernet/silan/sc92031.c
index 5eb933c97bba..7daa7d433099 100644
--- a/drivers/net/ethernet/silan/sc92031.c
+++ b/drivers/net/ethernet/silan/sc92031.c
@@ -987,7 +987,7 @@ out_unlock:
 	spin_unlock(&priv->lock);
 
 out:
-	dev_kfree_skb(skb);
+	dev_consume_skb_any(skb);
 
 	return NETDEV_TX_OK;
 }
-- 
cgit v1.2.2


From 828f56f60f42783913166229f7192004d3d095ba Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Sat, 15 Mar 2014 18:03:36 -0700
Subject: sis900: Call dev_kfree_skb_any instead of dev_kfree_skb.

Replace dev_kfree_skb with dev_kfree_skb_any in functions that can
be called in hard irq and other contexts.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
 drivers/net/ethernet/sis/sis900.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/sis/sis900.c b/drivers/net/ethernet/sis/sis900.c
index ff57a46388ee..6072f093e6b4 100644
--- a/drivers/net/ethernet/sis/sis900.c
+++ b/drivers/net/ethernet/sis/sis900.c
@@ -1614,7 +1614,7 @@ sis900_start_xmit(struct sk_buff *skb, struct net_device *net_dev)
 		skb->data, skb->len, PCI_DMA_TODEVICE);
 	if (unlikely(pci_dma_mapping_error(sis_priv->pci_dev,
 		sis_priv->tx_ring[entry].bufptr))) {
-			dev_kfree_skb(skb);
+			dev_kfree_skb_any(skb);
 			sis_priv->tx_skbuff[entry] = NULL;
 			net_dev->stats.tx_dropped++;
 			spin_unlock_irqrestore(&sis_priv->lock, flags);
-- 
cgit v1.2.2


From d27ab53c69f8c25d778d57064a83237df78779ce Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Sat, 15 Mar 2014 18:06:09 -0700
Subject: smc911x: Call dev_kfree_skb_any instead of dev_kfree_skb.

Replace dev_kfree_skb with dev_kfree_skb_any in functions that can
be called in hard irq and other contexts.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
 drivers/net/ethernet/smsc/smc911x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/smsc/smc911x.c b/drivers/net/ethernet/smsc/smc911x.c
index c50fb08c9905..66b05e62f70a 100644
--- a/drivers/net/ethernet/smsc/smc911x.c
+++ b/drivers/net/ethernet/smsc/smc911x.c
@@ -551,7 +551,7 @@ static int smc911x_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		dev->stats.tx_errors++;
 		dev->stats.tx_dropped++;
 		spin_unlock_irqrestore(&lp->lock, flags);
-		dev_kfree_skb(skb);
+		dev_kfree_skb_any(skb);
 		return NETDEV_TX_OK;
 	}
 
-- 
cgit v1.2.2


From 4b61fe2621e40fb348cd4c2a592c353b43c9460b Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Sat, 15 Mar 2014 18:08:04 -0700
Subject: smc91x: Call dev_kfree/consume_skb_any instead of dev_kfree_skb.

Replace dev_kfree_skb with dev_consume_skb_any in
smc_hardware_send_pkt that can be called in hard irq and other
contexts, and handles successfully transmitted packets.

Replace dev_kfree_skb with dev_kfree_skb_any in smc_hard_start_xmit which
can be called in hard irq and other contexts, and only frees skbs
when dropping them.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
 drivers/net/ethernet/smsc/smc91x.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/smsc/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c
index 839c0e6cca01..d1b4dca53a9d 100644
--- a/drivers/net/ethernet/smsc/smc91x.c
+++ b/drivers/net/ethernet/smsc/smc91x.c
@@ -621,7 +621,7 @@ static void smc_hardware_send_pkt(unsigned long data)
 done:	if (!THROTTLE_TX_PKTS)
 		netif_wake_queue(dev);
 
-	dev_kfree_skb(skb);
+	dev_consume_skb_any(skb);
 }
 
 /*
@@ -657,7 +657,7 @@ static int smc_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		netdev_warn(dev, "Far too big packet error.\n");
 		dev->stats.tx_errors++;
 		dev->stats.tx_dropped++;
-		dev_kfree_skb(skb);
+		dev_kfree_skb_any(skb);
 		return NETDEV_TX_OK;
 	}
 
-- 
cgit v1.2.2


From 89a9eb631822daff23c929e7d55a099941d38e09 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Sat, 15 Mar 2014 18:08:52 -0700
Subject: smsc911x: Call dev_consume_skb_any instead of dev_kfree_skb.

Replace dev_kfree_skb with dev_consume_skb_any in smsc911x_hard_xmit
which can be called in hard irq and other contexts. smsc911x_hard_xmit
always transmits and consumes the specified skb.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
 drivers/net/ethernet/smsc/smsc911x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c
index 95e2b9a20d40..ed36ff48af57 100644
--- a/drivers/net/ethernet/smsc/smsc911x.c
+++ b/drivers/net/ethernet/smsc/smsc911x.c
@@ -1672,7 +1672,7 @@ static int smsc911x_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	pdata->ops->tx_writefifo(pdata, (unsigned int *)bufp, wrsz);
 	freespace -= (skb->len + 32);
 	skb_tx_timestamp(skb);
-	dev_kfree_skb(skb);
+	dev_consume_skb_any(skb);
 
 	if (unlikely(smsc911x_tx_get_txstatcount(pdata) >= 30))
 		smsc911x_tx_update_txcounters(dev);
-- 
cgit v1.2.2


From 7c565c33464798b625c36503d0e34e1d3087619f Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Sat, 15 Mar 2014 18:11:09 -0700
Subject: stmmac: Call dev_consume_skb_any instead of dev_kfree_skb.

Replace dev_kfree_skb with dev_consume_skb_any in stmmac_tx_clean that can
be called in hard irq and other contexts.  stmmac_tx_clean handles
freeing successfully transmitted packets.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 8543e1cfd55e..d940034acdd4 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1303,7 +1303,7 @@ static void stmmac_tx_clean(struct stmmac_priv *priv)
 		priv->hw->mode->clean_desc3(priv, p);
 
 		if (likely(skb != NULL)) {
-			dev_kfree_skb(skb);
+			dev_consume_skb_any(skb);
 			priv->tx_skbuff[entry] = NULL;
 		}
 
-- 
cgit v1.2.2


From 241198acdacdb8545b68e344c42c0060b90c509a Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Sat, 15 Mar 2014 18:13:13 -0700
Subject: sungem: Call dev_consume_skb_any instead of dev_kfree_skb.

Replace dev_kfree_skb with dev_consume_skb_any in gem_tx which can be
called in hard irq and other contexts.  gem_tx handles successfully
transmitted packets.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
 drivers/net/ethernet/sun/sungem.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/sun/sungem.c b/drivers/net/ethernet/sun/sungem.c
index c2799dc46325..102a66fc54a2 100644
--- a/drivers/net/ethernet/sun/sungem.c
+++ b/drivers/net/ethernet/sun/sungem.c
@@ -688,7 +688,7 @@ static __inline__ void gem_tx(struct net_device *dev, struct gem *gp, u32 gem_st
 		}
 
 		dev->stats.tx_packets++;
-		dev_kfree_skb(skb);
+		dev_consume_skb_any(skb);
 	}
 	gp->tx_old = entry;
 
-- 
cgit v1.2.2


From 66d1bee1f3d63be9d62dae5e0bb727155567c1ce Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Sat, 15 Mar 2014 18:18:02 -0700
Subject: tilepro: Call dev_consume_skb_any instead of kfree_skb.

Replace kfree_skb with dev_consume_skb_any in tile_net_tx and
tile_net_tx_tso which can be called in hard irq and other contexts.

At the point where the skbs are freed a packet has been successfully
transmitted so dev_consume_skb_any is the appropriate variant to use.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
 drivers/net/ethernet/tile/tilepro.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/tile/tilepro.c b/drivers/net/ethernet/tile/tilepro.c
index b94449b4bd34..e5a5c5d4ce0c 100644
--- a/drivers/net/ethernet/tile/tilepro.c
+++ b/drivers/net/ethernet/tile/tilepro.c
@@ -1824,7 +1824,7 @@ busy:
 
 	/* Handle completions. */
 	for (i = 0; i < nolds; i++)
-		kfree_skb(olds[i]);
+		dev_consume_skb_any(olds[i]);
 
 	/* Update stats. */
 	u64_stats_update_begin(&stats->syncp);
@@ -2008,7 +2008,7 @@ busy:
 
 	/* Handle completions. */
 	for (i = 0; i < nolds; i++)
-		kfree_skb(olds[i]);
+		dev_consume_skb_any(olds[i]);
 
 	/* HACK: Track "expanded" size for short packets (e.g. 42 < 60). */
 	u64_stats_update_begin(&stats->syncp);
-- 
cgit v1.2.2


From 20eca054e9d90db3d6181e35d7425dfb79d5cd00 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Sat, 15 Mar 2014 18:20:12 -0700
Subject: spider_net: Call dev_consume_skb_any instead of dev_kfree_skb.

Replace dev_kfree_skb with dev_consume_skb_any in
spider_net_release_tx_chain which can be called in hard irq and other
contexts.

dev_consume_skb_any was choosen as it preserves the current
dev_kfree_skb semantics (dev_kfree_skb is consume_skb) and
is because it is correct most of the time as most packets
will have been successfully transmitted not dropeed.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
 drivers/net/ethernet/toshiba/spider_net.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/toshiba/spider_net.c b/drivers/net/ethernet/toshiba/spider_net.c
index 3f4a32e39d27..0282d0161859 100644
--- a/drivers/net/ethernet/toshiba/spider_net.c
+++ b/drivers/net/ethernet/toshiba/spider_net.c
@@ -860,7 +860,7 @@ spider_net_release_tx_chain(struct spider_net_card *card, int brutal)
 		if (skb) {
 			pci_unmap_single(card->pdev, buf_addr, skb->len,
 					PCI_DMA_TODEVICE);
-			dev_kfree_skb(skb);
+			dev_consume_skb_any(skb);
 		}
 	}
 	return 0;
-- 
cgit v1.2.2


From 4b3afc6e386bdacbce8326afcf8040a632050d3a Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Sat, 15 Mar 2014 18:22:47 -0700
Subject: via-rhine: Call dev_kfree/consume_skb_any instead of dev_kfree_skb.

Replace dev_kfree_skb with dev_kfree_skb_any in rhine_start_tx which
can be called in hard irq and other contexts.  Packets are only freed
in rhine_start_tx if they are dropped.

Replace dev_kfree_skb with dev_consume_skb_any in rhine_tx that can be
called in hard irq and other contexts.  rhine_tx handles successfully
transmitted packets.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
 drivers/net/ethernet/via/via-rhine.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/via/via-rhine.c b/drivers/net/ethernet/via/via-rhine.c
index 9d93fa120578..ce2e4d14ab31 100644
--- a/drivers/net/ethernet/via/via-rhine.c
+++ b/drivers/net/ethernet/via/via-rhine.c
@@ -1676,7 +1676,7 @@ static netdev_tx_t rhine_start_tx(struct sk_buff *skb,
 		/* Must use alignment buffer. */
 		if (skb->len > PKT_BUF_SZ) {
 			/* packet too long, drop it */
-			dev_kfree_skb(skb);
+			dev_kfree_skb_any(skb);
 			rp->tx_skbuff[entry] = NULL;
 			dev->stats.tx_dropped++;
 			return NETDEV_TX_OK;
@@ -1696,7 +1696,7 @@ static netdev_tx_t rhine_start_tx(struct sk_buff *skb,
 			pci_map_single(rp->pdev, skb->data, skb->len,
 				       PCI_DMA_TODEVICE);
 		if (dma_mapping_error(&rp->pdev->dev, rp->tx_skbuff_dma[entry])) {
-			dev_kfree_skb(skb);
+			dev_kfree_skb_any(skb);
 			rp->tx_skbuff_dma[entry] = 0;
 			dev->stats.tx_dropped++;
 			return NETDEV_TX_OK;
@@ -1834,7 +1834,7 @@ static void rhine_tx(struct net_device *dev)
 					 rp->tx_skbuff[entry]->len,
 					 PCI_DMA_TODEVICE);
 		}
-		dev_kfree_skb(rp->tx_skbuff[entry]);
+		dev_consume_skb_any(rp->tx_skbuff[entry]);
 		rp->tx_skbuff[entry] = NULL;
 		entry = (++rp->dirty_tx) % TX_RING_SIZE;
 	}
-- 
cgit v1.2.2


From 001eadf6ec9764786f1719b4f4375108db3811dd Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Sat, 15 Mar 2014 18:25:05 -0700
Subject: via-velocity: Call dev_kfree_skb_any instead of kfree_skb.

Replace dev_kfree_skb with dev_kfree_skb_any in velocity_xmit that can
be called in hard irq and other contexts.  Packets are freed and
dropped in velocity_xmit when they are too fragmented and can
not be linearized.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
 drivers/net/ethernet/via/via-velocity.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/via/via-velocity.c b/drivers/net/ethernet/via/via-velocity.c
index ad61d26a44f3..de08e86db209 100644
--- a/drivers/net/ethernet/via/via-velocity.c
+++ b/drivers/net/ethernet/via/via-velocity.c
@@ -2565,7 +2565,7 @@ static netdev_tx_t velocity_xmit(struct sk_buff *skb,
 	/* The hardware can handle at most 7 memory segments, so merge
 	 * the skb if there are more */
 	if (skb_shinfo(skb)->nr_frags > 6 && __skb_linearize(skb)) {
-		kfree_skb(skb);
+		dev_kfree_skb_any(skb);
 		return NETDEV_TX_OK;
 	}
 
-- 
cgit v1.2.2


From 69e73d2391e9fc0f2c5df3935197ccefafc5760f Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Sat, 15 Mar 2014 18:27:33 -0700
Subject: xilinx_emaclite: Call dev_consume_skb_any instead of dev_kfree_skb.

Replace dev_kfree_skb with dev_consume_skb_any in xemaclite_send which
can be called in hard irq and other contexts.  xemacelite_send only
frees skbs that it has successfully transmitted.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
 drivers/net/ethernet/xilinx/xilinx_emaclite.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
index 36052b98b3fc..58756617644f 100644
--- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c
+++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
@@ -1037,7 +1037,7 @@ static int xemaclite_send(struct sk_buff *orig_skb, struct net_device *dev)
 	skb_tx_timestamp(new_skb);
 
 	dev->stats.tx_bytes += len;
-	dev_kfree_skb(new_skb);
+	dev_consume_skb_any(new_skb);
 
 	return 0;
 }
-- 
cgit v1.2.2


From b1b718173a64470b6f04261146c0b369004a4346 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Sat, 15 Mar 2014 18:31:16 -0700
Subject: vmxnet3: Call dev_kfree_skb_any instead of dev_kfree_skb.

Replace dev_kfree_skb with dev_kfree_skb_any in vmnet3_tx_xmit which
can be called in hard irq and other contexts.  vmnet3_tx_xmit only
frees skbs that it has dropped.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
 drivers/net/vmxnet3/vmxnet3_drv.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c
index 28965adfeebd..97394345e5dd 100644
--- a/drivers/net/vmxnet3/vmxnet3_drv.c
+++ b/drivers/net/vmxnet3/vmxnet3_drv.c
@@ -1078,7 +1078,7 @@ unlock_drop_pkt:
 	spin_unlock_irqrestore(&tq->tx_lock, flags);
 drop_pkt:
 	tq->stats.drop_total++;
-	dev_kfree_skb(skb);
+	dev_kfree_skb_any(skb);
 	return NETDEV_TX_OK;
 }
 
-- 
cgit v1.2.2


From 979de8a09a00228017e8ad1bc9d6ebc60b51bee9 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Sat, 15 Mar 2014 18:33:04 -0700
Subject: xen-netfront: Call dev_kfree_skb_any instead of dev_kfree_skb.

Replace dev_kfree_skb with dev_kfree_skb_any in xennet_start_xmit
which can be called in hard irq and other contexts.  xennet_start_xmit
only fress skbs which it drops.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
 drivers/net/xen-netfront.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
index 49f3b3dbbed8..057b05700f8b 100644
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -658,7 +658,7 @@ static int xennet_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
  drop:
 	dev->stats.tx_dropped++;
-	dev_kfree_skb(skb);
+	dev_kfree_skb_any(skb);
 	return NETDEV_TX_OK;
 }
 
-- 
cgit v1.2.2


From 85e945253955f399c2aacd220423a5e298e963b8 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Sat, 15 Mar 2014 18:43:33 -0700
Subject: virtio_net: Call dev_kfree_skb_any instead of dev_kfree_skb.

Replace dev_kfree_skb with dev_kfree_skb_any in start_xmit which can
be called in hard irq and other contexts.

start_xmit only frees skbs that it is dropping.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
 drivers/net/virtio_net.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 80d84c446962..99fa48c941c6 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -883,7 +883,7 @@ static netdev_tx_t start_xmit(struct sk_buff *skb, struct net_device *dev)
 			dev_warn(&dev->dev,
 				 "Unexpected TXQ (%d) queue failure: %d\n", qnum, err);
 		dev->stats.tx_dropped++;
-		kfree_skb(skb);
+		dev_kfree_skb_any(skb);
 		return NETDEV_TX_OK;
 	}
 
-- 
cgit v1.2.2


From 397dfd9f93ccfe71660eafbaac651a96195c24ed Mon Sep 17 00:00:00 2001
From: Zoltan Kiss <zoltan.kiss@citrix.com>
Date: Fri, 21 Mar 2014 17:23:04 +0000
Subject: Revert "xen-netback: Aggregate TX unmap operations"

This reverts commit e9275f5e2df1b2098a8cc405d87b88b9affd73e6. This commit is the
last in the netback grant mapping series, and it tries to do more aggressive
aggreagtion of unmap operations. However practical use showed almost no
positive effect, whilst with certain frontends it causes significant performance
regression.

Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/xen-netback/common.h    |  2 --
 drivers/net/xen-netback/interface.c |  2 --
 drivers/net/xen-netback/netback.c   | 34 +---------------------------------
 3 files changed, 1 insertion(+), 37 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/xen-netback/common.h b/drivers/net/xen-netback/common.h
index bef37be402b8..0355f8767e3b 100644
--- a/drivers/net/xen-netback/common.h
+++ b/drivers/net/xen-netback/common.h
@@ -137,8 +137,6 @@ struct xenvif {
 	u16 dealloc_ring[MAX_PENDING_REQS];
 	struct task_struct *dealloc_task;
 	wait_queue_head_t dealloc_wq;
-	struct timer_list dealloc_delay;
-	bool dealloc_delay_timed_out;
 
 	/* Use kthread for guest RX */
 	struct task_struct *task;
diff --git a/drivers/net/xen-netback/interface.c b/drivers/net/xen-netback/interface.c
index a6a8c1579eb9..23bb2f4b18fe 100644
--- a/drivers/net/xen-netback/interface.c
+++ b/drivers/net/xen-netback/interface.c
@@ -407,7 +407,6 @@ struct xenvif *xenvif_alloc(struct device *parent, domid_t domid,
 			  .desc = i };
 		vif->grant_tx_handle[i] = NETBACK_INVALID_HANDLE;
 	}
-	init_timer(&vif->dealloc_delay);
 
 	/*
 	 * Initialise a dummy MAC address. We choose the numerically
@@ -556,7 +555,6 @@ void xenvif_disconnect(struct xenvif *vif)
 	}
 
 	if (vif->dealloc_task) {
-		del_timer_sync(&vif->dealloc_delay);
 		kthread_stop(vif->dealloc_task);
 		vif->dealloc_task = NULL;
 	}
diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c
index 5a8c4a43c522..1f595e51791e 100644
--- a/drivers/net/xen-netback/netback.c
+++ b/drivers/net/xen-netback/netback.c
@@ -133,11 +133,6 @@ static inline pending_ring_idx_t pending_index(unsigned i)
 	return i & (MAX_PENDING_REQS-1);
 }
 
-static inline pending_ring_idx_t nr_free_slots(struct xen_netif_tx_back_ring *ring)
-{
-	return ring->nr_ents -	(ring->sring->req_prod - ring->rsp_prod_pvt);
-}
-
 bool xenvif_rx_ring_slots_available(struct xenvif *vif, int needed)
 {
 	RING_IDX prod, cons;
@@ -1718,36 +1713,9 @@ static inline int tx_work_todo(struct xenvif *vif)
 	return 0;
 }
 
-static void xenvif_dealloc_delay(unsigned long data)
-{
-	struct xenvif *vif = (struct xenvif *)data;
-
-	vif->dealloc_delay_timed_out = true;
-	wake_up(&vif->dealloc_wq);
-}
-
 static inline bool tx_dealloc_work_todo(struct xenvif *vif)
 {
-	if (vif->dealloc_cons != vif->dealloc_prod) {
-		if ((nr_free_slots(&vif->tx) > 2 * XEN_NETBK_LEGACY_SLOTS_MAX) &&
-		    (vif->dealloc_prod - vif->dealloc_cons < MAX_PENDING_REQS / 4) &&
-		    !vif->dealloc_delay_timed_out) {
-			if (!timer_pending(&vif->dealloc_delay)) {
-				vif->dealloc_delay.function =
-					xenvif_dealloc_delay;
-				vif->dealloc_delay.data = (unsigned long)vif;
-				mod_timer(&vif->dealloc_delay,
-					  jiffies + msecs_to_jiffies(1));
-
-			}
-			return false;
-		}
-		del_timer_sync(&vif->dealloc_delay);
-		vif->dealloc_delay_timed_out = false;
-		return true;
-	}
-
-	return false;
+	return vif->dealloc_cons != vif->dealloc_prod;
 }
 
 void xenvif_unmap_frontend_rings(struct xenvif *vif)
-- 
cgit v1.2.2


From 2c5f4f8422e8cf3dd15638226e964f2e13132267 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Tue, 25 Mar 2014 19:02:16 -0400
Subject: xen-netback: Proper printf format for ptrdiff_t is 't'.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This fixes:

drivers/net/xen-netback/netback.c: In function ‘xenvif_tx_dealloc_action’:
drivers/net/xen-netback/netback.c:1573:8: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘long int’ [-Wformat=]

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/xen-netback/netback.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c
index 1f595e51791e..1e4628724778 100644
--- a/drivers/net/xen-netback/netback.c
+++ b/drivers/net/xen-netback/netback.c
@@ -1569,7 +1569,7 @@ static inline void xenvif_tx_dealloc_action(struct xenvif *vif)
 					vif->pages_to_unmap,
 					gop - vif->tx_unmap_ops);
 		if (ret) {
-			netdev_err(vif->dev, "Unmap fail: nr_ops %x ret %d\n",
+			netdev_err(vif->dev, "Unmap fail: nr_ops %tx ret %d\n",
 				   gop - vif->tx_unmap_ops, ret);
 			for (i = 0; i < gop - vif->tx_unmap_ops; ++i) {
 				if (gop[i].status != GNTST_okay)
-- 
cgit v1.2.2


From 42f8277f56cf4a9570b1f0fe10a4fec3f48c832a Mon Sep 17 00:00:00 2001
From: Yuval Mintz <Yuval.Mintz@qlogic.com>
Date: Sun, 23 Mar 2014 18:12:23 +0200
Subject: bnx2x: Support mng. request for driver version

This adds support in a new management feature which needs the driver versions
(bnx2x, bnx2fc and bnx2i) loaded for each interface.

Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x.h      |   7 ++
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c  |   7 ++
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h  |  29 ++++++
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 121 ++++++++++++++++++++++-
 4 files changed, 163 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
index 722160940ab9..f33fab6abb95 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -1413,6 +1413,7 @@ enum sp_rtnl_flag {
 	BNX2X_SP_RTNL_RX_MODE,
 	BNX2X_SP_RTNL_HYPERVISOR_VLAN,
 	BNX2X_SP_RTNL_TX_STOP,
+	BNX2X_SP_RTNL_GET_DRV_VERSION,
 };
 
 struct bnx2x_prev_path_list {
@@ -1703,6 +1704,10 @@ struct bnx2x {
 	struct bnx2x_slowpath	*slowpath;
 	dma_addr_t		slowpath_mapping;
 
+	/* Mechanism protecting the drv_info_to_mcp */
+	struct mutex		drv_info_mutex;
+	bool			drv_info_mng_owner;
+
 	/* Total number of FW statistics requests */
 	u8			fw_stats_num;
 
@@ -2535,6 +2540,8 @@ enum {
 
 void bnx2x_set_local_cmng(struct bnx2x *bp);
 
+void bnx2x_update_mng_version(struct bnx2x *bp);
+
 #define MCPR_SCRATCH_BASE(bp) \
 	(CHIP_IS_E1x(bp) ? MCP_REG_MCPR_SCRATCH : MCP_A_REG_MCPR_SCRATCH)
 
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
index acd494647f25..9261d5313b5b 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -2804,6 +2804,9 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 	if (CNIC_ENABLED(bp))
 		bnx2x_load_cnic(bp);
 
+	if (IS_PF(bp))
+		bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_GET_DRV_VERSION, 0);
+
 	if (IS_PF(bp) && SHMEM2_HAS(bp, drv_capabilities_flag)) {
 		/* mark driver is loaded in shmem2 */
 		u32 val;
@@ -3030,6 +3033,10 @@ int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode, bool keep_link)
 	bp->state = BNX2X_STATE_CLOSED;
 	bp->cnic_loaded = false;
 
+	/* Clear driver version indication in shmem */
+	if (IS_PF(bp))
+		bnx2x_update_mng_version(bp);
+
 	/* Check if there are pending parity attentions. If there are - set
 	 * RECOVERY_IN_PROGRESS.
 	 */
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h
index 46e2f18df2cb..5ba8af50c84f 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h
@@ -2003,6 +2003,23 @@ struct shmem_lfa {
 	#define SHMEM_LFA_DONT_CLEAR_STAT		(1<<24)
 };
 
+/* Used to support NSCI get OS driver version
+ * on driver load the version value will be set
+ * on driver unload driver value of 0x0 will be set.
+ */
+struct os_drv_ver {
+#define DRV_VER_NOT_LOADED			0
+
+	/* personalties order is important */
+#define DRV_PERS_ETHERNET			0
+#define DRV_PERS_ISCSI				1
+#define DRV_PERS_FCOE				2
+
+	/* shmem2 struct is constant can't add more personalties here */
+#define MAX_DRV_PERS				3
+	u32 versions[MAX_DRV_PERS];
+};
+
 struct ncsi_oem_fcoe_features {
 	u32 fcoe_features1;
 	#define FCOE_FEATURES1_IOS_PER_CONNECTION_MASK          0x0000FFFF
@@ -2217,6 +2234,18 @@ struct shmem2_region {
 	u32 reserved4;				/* Offset 0x150 */
 	u32 link_attr_sync[PORT_MAX];		/* Offset 0x154 */
 	#define LINK_ATTR_SYNC_KR2_ENABLE	(1<<0)
+
+	u32 reserved5[2];
+	u32 reserved6[PORT_MAX];
+
+	/* driver version for each personality */
+	struct os_drv_ver func_os_drv_ver[E2_FUNC_MAX]; /* Offset 0x16c */
+
+	/* Flag to the driver that PF's drv_info_host_addr buffer was read  */
+	u32 mfw_drv_indication;
+
+	/* We use indication for each PF (0..3) */
+#define MFW_DRV_IND_READ_DONE_OFFSET(_pf_) (1 << (_pf_))
 };
 
 
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 5e74599b05c7..faef7b19a529 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -3482,10 +3482,15 @@ static void bnx2x_handle_eee_event(struct bnx2x *bp)
 	bnx2x_fw_command(bp, DRV_MSG_CODE_EEE_RESULTS_ACK, 0);
 }
 
+#define BNX2X_UPDATE_DRV_INFO_IND_LENGTH	(20)
+#define BNX2X_UPDATE_DRV_INFO_IND_COUNT		(25)
+
 static void bnx2x_handle_drv_info_req(struct bnx2x *bp)
 {
 	enum drv_info_opcode op_code;
 	u32 drv_info_ctl = SHMEM2_RD(bp, drv_info_control);
+	bool release = false;
+	int wait;
 
 	/* if drv_info version supported by MFW doesn't match - send NACK */
 	if ((drv_info_ctl & DRV_INFO_CONTROL_VER_MASK) != DRV_INFO_CUR_VER) {
@@ -3496,6 +3501,9 @@ static void bnx2x_handle_drv_info_req(struct bnx2x *bp)
 	op_code = (drv_info_ctl & DRV_INFO_CONTROL_OP_CODE_MASK) >>
 		  DRV_INFO_CONTROL_OP_CODE_SHIFT;
 
+	/* Must prevent other flows from accessing drv_info_to_mcp */
+	mutex_lock(&bp->drv_info_mutex);
+
 	memset(&bp->slowpath->drv_info_to_mcp, 0,
 	       sizeof(union drv_info_to_mcp));
 
@@ -3512,7 +3520,7 @@ static void bnx2x_handle_drv_info_req(struct bnx2x *bp)
 	default:
 		/* if op code isn't supported - send NACK */
 		bnx2x_fw_command(bp, DRV_MSG_CODE_DRV_INFO_NACK, 0);
-		return;
+		goto out;
 	}
 
 	/* if we got drv_info attn from MFW then these fields are defined in
@@ -3524,6 +3532,106 @@ static void bnx2x_handle_drv_info_req(struct bnx2x *bp)
 		U64_HI(bnx2x_sp_mapping(bp, drv_info_to_mcp)));
 
 	bnx2x_fw_command(bp, DRV_MSG_CODE_DRV_INFO_ACK, 0);
+
+	/* Since possible management wants both this and get_driver_version
+	 * need to wait until management notifies us it finished utilizing
+	 * the buffer.
+	 */
+	if (!SHMEM2_HAS(bp, mfw_drv_indication)) {
+		DP(BNX2X_MSG_MCP, "Management does not support indication\n");
+	} else if (!bp->drv_info_mng_owner) {
+		u32 bit = MFW_DRV_IND_READ_DONE_OFFSET((BP_ABS_FUNC(bp) >> 1));
+
+		for (wait = 0; wait < BNX2X_UPDATE_DRV_INFO_IND_COUNT; wait++) {
+			u32 indication = SHMEM2_RD(bp, mfw_drv_indication);
+
+			/* Management is done; need to clear indication */
+			if (indication & bit) {
+				SHMEM2_WR(bp, mfw_drv_indication,
+					  indication & ~bit);
+				release = true;
+				break;
+			}
+
+			msleep(BNX2X_UPDATE_DRV_INFO_IND_LENGTH);
+		}
+	}
+	if (!release) {
+		DP(BNX2X_MSG_MCP, "Management did not release indication\n");
+		bp->drv_info_mng_owner = true;
+	}
+
+out:
+	mutex_unlock(&bp->drv_info_mutex);
+}
+
+static u32 bnx2x_update_mng_version_utility(u8 *version, bool bnx2x_format)
+{
+	u8 vals[4];
+	int i = 0;
+
+	if (bnx2x_format) {
+		i = sscanf(version, "1.%c%hhd.%hhd.%hhd",
+			   &vals[0], &vals[1], &vals[2], &vals[3]);
+		if (i > 0)
+			vals[0] -= '0';
+	} else {
+		i = sscanf(version, "%hhd.%hhd.%hhd.%hhd",
+			   &vals[0], &vals[1], &vals[2], &vals[3]);
+	}
+
+	while (i < 4)
+		vals[i++] = 0;
+
+	return (vals[0] << 24) | (vals[1] << 16) | (vals[2] << 8) | vals[3];
+}
+
+void bnx2x_update_mng_version(struct bnx2x *bp)
+{
+	u32 iscsiver = DRV_VER_NOT_LOADED;
+	u32 fcoever = DRV_VER_NOT_LOADED;
+	u32 ethver = DRV_VER_NOT_LOADED;
+	int idx = BP_FW_MB_IDX(bp);
+	u8 *version;
+
+	if (!SHMEM2_HAS(bp, func_os_drv_ver))
+		return;
+
+	mutex_lock(&bp->drv_info_mutex);
+	/* Must not proceed when `bnx2x_handle_drv_info_req' is feasible */
+	if (bp->drv_info_mng_owner)
+		goto out;
+
+	if (bp->state != BNX2X_STATE_OPEN)
+		goto out;
+
+	/* Parse ethernet driver version */
+	ethver = bnx2x_update_mng_version_utility(DRV_MODULE_VERSION, true);
+	if (!CNIC_LOADED(bp))
+		goto out;
+
+	/* Try getting storage driver version via cnic */
+	memset(&bp->slowpath->drv_info_to_mcp, 0,
+	       sizeof(union drv_info_to_mcp));
+	bnx2x_drv_info_iscsi_stat(bp);
+	version = bp->slowpath->drv_info_to_mcp.iscsi_stat.version;
+	iscsiver = bnx2x_update_mng_version_utility(version, false);
+
+	memset(&bp->slowpath->drv_info_to_mcp, 0,
+	       sizeof(union drv_info_to_mcp));
+	bnx2x_drv_info_fcoe_stat(bp);
+	version = bp->slowpath->drv_info_to_mcp.fcoe_stat.version;
+	fcoever = bnx2x_update_mng_version_utility(version, false);
+
+out:
+	SHMEM2_WR(bp, func_os_drv_ver[idx].versions[DRV_PERS_ETHERNET], ethver);
+	SHMEM2_WR(bp, func_os_drv_ver[idx].versions[DRV_PERS_ISCSI], iscsiver);
+	SHMEM2_WR(bp, func_os_drv_ver[idx].versions[DRV_PERS_FCOE], fcoever);
+
+	mutex_unlock(&bp->drv_info_mutex);
+
+	DP(BNX2X_MSG_MCP, "Setting driver version: ETH [%08x] iSCSI [%08x] FCoE [%08x]\n",
+	   ethver, iscsiver, fcoever);
 }
 
 static void bnx2x_dcc_event(struct bnx2x *bp, u32 dcc_event)
@@ -9807,6 +9915,10 @@ sp_rtnl_not_reset:
 		bnx2x_dcbx_resume_hw_tx(bp);
 	}
 
+	if (test_and_clear_bit(BNX2X_SP_RTNL_GET_DRV_VERSION,
+			       &bp->sp_rtnl_state))
+		bnx2x_update_mng_version(bp);
+
 	/* work which needs rtnl lock not-taken (as it takes the lock itself and
 	 * can be called from other contexts as well)
 	 */
@@ -11757,6 +11869,8 @@ static int bnx2x_init_bp(struct bnx2x *bp)
 
 	mutex_init(&bp->port.phy_mutex);
 	mutex_init(&bp->fw_mb_mutex);
+	mutex_init(&bp->drv_info_mutex);
+	bp->drv_info_mng_owner = false;
 	spin_lock_init(&bp->stats_lock);
 	sema_init(&bp->stats_sema, 1);
 
@@ -13794,6 +13908,7 @@ static int bnx2x_drv_ctl(struct net_device *dev, struct drv_ctl_info *ctl)
 				REG_WR(bp, scratch_offset + i,
 				       *(host_addr + i/4));
 		}
+		bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_GET_DRV_VERSION, 0);
 		break;
 	}
 
@@ -13811,6 +13926,7 @@ static int bnx2x_drv_ctl(struct net_device *dev, struct drv_ctl_info *ctl)
 				cap &= ~DRV_FLAGS_CAPABILITIES_LOADED_FCOE;
 			SHMEM2_WR(bp, drv_capabilities_flag[idx], cap);
 		}
+		bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_GET_DRV_VERSION, 0);
 		break;
 	}
 
@@ -13916,6 +14032,9 @@ static int bnx2x_register_cnic(struct net_device *dev, struct cnic_ops *ops,
 
 	rcu_assign_pointer(bp->cnic_ops, ops);
 
+	/* Schedule driver to read CNIC driver versions */
+	bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_GET_DRV_VERSION, 0);
+
 	return 0;
 }
 
-- 
cgit v1.2.2


From 370d4a26590fcc7510ad4a8432e4982a209f1b59 Mon Sep 17 00:00:00 2001
From: Yuval Mintz <Yuval.Mintz@qlogic.com>
Date: Sun, 23 Mar 2014 18:12:24 +0200
Subject: bnx2x: Create workqueue for IOV related tasks

The bnx2x sriov mechanisms were done in the bnx2x slowpath workitem which
runs on the bnx2x's workqueue; This workitem is also responsible for the bottom
half of interrupt handling in the driver, and specifically it also receives
FW notifications of ramrod completions, allowing other flows to progress.

The original design of the sriov reltaed-flows was based on the notion such
flows must not sleep, since their context is the slowpath workitem.
Otherwise, we might reach timeouts - those flows may wait for ramrod completion
that will never arrive as the workitem wlll not be re-scheduled until that same
flow will be over.

In more recent time bnx2x started supporting features in which the VF interface
can be configured by the tools accessing the PF on the hypervisor.
This support created possible races on the VF-PF lock (which is taken either
when the PF is handling a VF message or when the PF is doing some slowpath work
on behalf of the VF) which may cause timeouts on the VF side and lags on the PF
side.

This patch changes the scheme - it creates a new workqueue for sriov related
tasks and moves all handling currently done in the slowpath task into the the
new workqueue.

Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x.h       |  15 +++-
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c  |  29 +++---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c |  41 +++++++--
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h |  37 +++++---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c  | 103 +++++++++++++---------
 5 files changed, 147 insertions(+), 78 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
index f33fab6abb95..8e35dbaca76e 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -1155,10 +1155,6 @@ struct bnx2x_port {
 			(offsetof(struct bnx2x_eth_stats, stat_name) / 4)
 
 /* slow path */
-
-/* slow path work-queue */
-extern struct workqueue_struct *bnx2x_wq;
-
 #define BNX2X_MAX_NUM_OF_VFS	64
 #define BNX2X_VF_CID_WND	4 /* log num of queues per VF. HW config. */
 #define BNX2X_CIDS_PER_VF	(1 << BNX2X_VF_CID_WND)
@@ -1416,6 +1412,12 @@ enum sp_rtnl_flag {
 	BNX2X_SP_RTNL_GET_DRV_VERSION,
 };
 
+enum bnx2x_iov_flag {
+	BNX2X_IOV_HANDLE_VF_MSG,
+	BNX2X_IOV_CONT_VFOP,
+	BNX2X_IOV_HANDLE_FLR,
+};
+
 struct bnx2x_prev_path_list {
 	struct list_head list;
 	u8 bus;
@@ -1614,6 +1616,8 @@ struct bnx2x {
 	int			mrrs;
 
 	struct delayed_work	sp_task;
+	struct delayed_work	iov_task;
+
 	atomic_t		interrupt_occurred;
 	struct delayed_work	sp_rtnl_task;
 
@@ -1897,6 +1901,9 @@ struct bnx2x {
 	/* operation indication for the sp_rtnl task */
 	unsigned long				sp_rtnl_state;
 
+	/* Indication of the IOV tasks */
+	unsigned long				iov_task_state;
+
 	/* DCBX Negotiation results */
 	struct dcbx_features			dcbx_local_feat;
 	u32					dcbx_error;
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index faef7b19a529..b5c7f77e8108 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -120,7 +120,8 @@ static int debug;
 module_param(debug, int, S_IRUGO);
 MODULE_PARM_DESC(debug, " Default debug msglevel");
 
-struct workqueue_struct *bnx2x_wq;
+static struct workqueue_struct *bnx2x_wq;
+struct workqueue_struct *bnx2x_iov_wq;
 
 struct bnx2x_mac_vals {
 	u32 xmac_addr;
@@ -1857,7 +1858,7 @@ void bnx2x_sp_event(struct bnx2x_fastpath *fp, union eth_rx_cqe *rr_cqe)
 		return;
 #endif
 	/* SRIOV: reschedule any 'in_progress' operations */
-	bnx2x_iov_sp_event(bp, cid, true);
+	bnx2x_iov_sp_event(bp, cid);
 
 	smp_mb__before_atomic_inc();
 	atomic_inc(&bp->cq_spq_left);
@@ -4160,7 +4161,8 @@ static void bnx2x_attn_int_deasserted3(struct bnx2x *bp, u32 attn)
 				bnx2x_handle_drv_info_req(bp);
 
 			if (val & DRV_STATUS_VF_DISABLED)
-				bnx2x_vf_handle_flr_event(bp);
+				bnx2x_schedule_iov_task(bp,
+							BNX2X_IOV_HANDLE_FLR);
 
 			if ((bp->port.pmf == 0) && (val & DRV_STATUS_PMF))
 				bnx2x_pmf_update(bp);
@@ -5351,8 +5353,8 @@ static void bnx2x_eq_int(struct bnx2x *bp)
 		/* handle eq element */
 		switch (opcode) {
 		case EVENT_RING_OPCODE_VF_PF_CHANNEL:
-			DP(BNX2X_MSG_IOV, "vf pf channel element on eq\n");
-			bnx2x_vf_mbx(bp, &elem->message.data.vf_pf_event);
+			bnx2x_vf_mbx_schedule(bp,
+					      &elem->message.data.vf_pf_event);
 			continue;
 
 		case EVENT_RING_OPCODE_STAT_QUERY:
@@ -5567,13 +5569,6 @@ static void bnx2x_sp_task(struct work_struct *work)
 			     le16_to_cpu(bp->def_att_idx), IGU_INT_ENABLE, 1);
 	}
 
-	/* must be called after the EQ processing (since eq leads to sriov
-	 * ramrod completion flows).
-	 * This flow may have been scheduled by the arrival of a ramrod
-	 * completion, or by the sriov code rescheduling itself.
-	 */
-	bnx2x_iov_sp_task(bp);
-
 	/* afex - poll to check if VIFSET_ACK should be sent to MFW */
 	if (test_and_clear_bit(BNX2X_AFEX_PENDING_VIFSET_MCP_ACK,
 			       &bp->sp_state)) {
@@ -8990,6 +8985,7 @@ static int bnx2x_func_wait_started(struct bnx2x *bp)
 		synchronize_irq(bp->pdev->irq);
 
 	flush_workqueue(bnx2x_wq);
+	flush_workqueue(bnx2x_iov_wq);
 
 	while (bnx2x_func_get_state(bp, &bp->func_obj) !=
 				BNX2X_F_STATE_STARTED && tout--)
@@ -11877,6 +11873,7 @@ static int bnx2x_init_bp(struct bnx2x *bp)
 	INIT_DELAYED_WORK(&bp->sp_task, bnx2x_sp_task);
 	INIT_DELAYED_WORK(&bp->sp_rtnl_task, bnx2x_sp_rtnl_task);
 	INIT_DELAYED_WORK(&bp->period_task, bnx2x_period_task);
+	INIT_DELAYED_WORK(&bp->iov_task, bnx2x_iov_task);
 	if (IS_PF(bp)) {
 		rc = bnx2x_get_hwinfo(bp);
 		if (rc)
@@ -13499,11 +13496,18 @@ static int __init bnx2x_init(void)
 		pr_err("Cannot create workqueue\n");
 		return -ENOMEM;
 	}
+	bnx2x_iov_wq = create_singlethread_workqueue("bnx2x_iov");
+	if (!bnx2x_iov_wq) {
+		pr_err("Cannot create iov workqueue\n");
+		destroy_workqueue(bnx2x_wq);
+		return -ENOMEM;
+	}
 
 	ret = pci_register_driver(&bnx2x_pci_driver);
 	if (ret) {
 		pr_err("Cannot register driver\n");
 		destroy_workqueue(bnx2x_wq);
+		destroy_workqueue(bnx2x_iov_wq);
 	}
 	return ret;
 }
@@ -13515,6 +13519,7 @@ static void __exit bnx2x_cleanup(void)
 	pci_unregister_driver(&bnx2x_pci_driver);
 
 	destroy_workqueue(bnx2x_wq);
+	destroy_workqueue(bnx2x_iov_wq);
 
 	/* Free globally allocated resources */
 	list_for_each_safe(pos, q, &bnx2x_prev_list) {
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
index 61e6f606d8a4..8e2b191234f1 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
@@ -2042,6 +2042,9 @@ int bnx2x_iov_init_one(struct bnx2x *bp, int int_mode_param,
 		goto failed;
 	}
 
+	/* Prepare the VFs event synchronization mechanism */
+	mutex_init(&bp->vfdb->event_mutex);
+
 	return 0;
 failed:
 	DP(BNX2X_MSG_IOV, "Failed err=%d\n", err);
@@ -2469,7 +2472,7 @@ get_vf:
 		return 0;
 	}
 	/* SRIOV: reschedule any 'in_progress' operations */
-	bnx2x_iov_sp_event(bp, cid, false);
+	bnx2x_iov_sp_event(bp, cid);
 
 	return 0;
 }
@@ -2506,7 +2509,7 @@ void bnx2x_iov_set_queue_sp_obj(struct bnx2x *bp, int vf_cid,
 	}
 }
 
-void bnx2x_iov_sp_event(struct bnx2x *bp, int vf_cid, bool queue_work)
+void bnx2x_iov_sp_event(struct bnx2x *bp, int vf_cid)
 {
 	struct bnx2x_virtf *vf;
 
@@ -2518,8 +2521,7 @@ void bnx2x_iov_sp_event(struct bnx2x *bp, int vf_cid, bool queue_work)
 	if (vf) {
 		/* set in_progress flag */
 		atomic_set(&vf->op_in_progress, 1);
-		if (queue_work)
-			queue_delayed_work(bnx2x_wq, &bp->sp_task, 0);
+		bnx2x_schedule_iov_task(bp, BNX2X_IOV_CONT_VFOP);
 	}
 }
 
@@ -2604,7 +2606,7 @@ void bnx2x_iov_adjust_stats_req(struct bnx2x *bp)
 	bp->fw_stats_req->hdr.cmd_num = bp->fw_stats_num + stats_count;
 }
 
-void bnx2x_iov_sp_task(struct bnx2x *bp)
+void bnx2x_iov_vfop_cont(struct bnx2x *bp)
 {
 	int i;
 
@@ -3875,3 +3877,32 @@ void bnx2x_iov_channel_down(struct bnx2x *bp)
 		bnx2x_post_vf_bulletin(bp, vf_idx);
 	}
 }
+
+void bnx2x_iov_task(struct work_struct *work)
+{
+	struct bnx2x *bp = container_of(work, struct bnx2x, iov_task.work);
+
+	if (!netif_running(bp->dev))
+		return;
+
+	if (test_and_clear_bit(BNX2X_IOV_HANDLE_FLR,
+			       &bp->iov_task_state))
+		bnx2x_vf_handle_flr_event(bp);
+
+	if (test_and_clear_bit(BNX2X_IOV_CONT_VFOP,
+			       &bp->iov_task_state))
+		bnx2x_iov_vfop_cont(bp);
+
+	if (test_and_clear_bit(BNX2X_IOV_HANDLE_VF_MSG,
+			       &bp->iov_task_state))
+		bnx2x_vf_mbx(bp);
+}
+
+void bnx2x_schedule_iov_task(struct bnx2x *bp, enum bnx2x_iov_flag flag)
+{
+	smp_mb__before_clear_bit();
+	set_bit(flag, &bp->iov_task_state);
+	smp_mb__after_clear_bit();
+	DP(BNX2X_MSG_IOV, "Scheduling iov task [Flag: %d]\n", flag);
+	queue_delayed_work(bnx2x_iov_wq, &bp->iov_task, 0);
+}
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h
index b1dc751c6175..87f7c9743f71 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h
@@ -30,6 +30,8 @@ enum sample_bulletin_result {
 
 #ifdef CONFIG_BNX2X_SRIOV
 
+extern struct workqueue_struct *bnx2x_iov_wq;
+
 /* The bnx2x device structure holds vfdb structure described below.
  * The VF array is indexed by the relative vfid.
  */
@@ -346,11 +348,6 @@ struct bnx2x_vf_mbx {
 	u32 vf_addr_hi;
 
 	struct vfpf_first_tlv first_tlv;	/* saved VF request header */
-
-	u8 flags;
-#define VF_MSG_INPROCESS	0x1	/* failsafe - the FW should prevent
-					 * more then one pending msg
-					 */
 };
 
 struct bnx2x_vf_sp {
@@ -427,6 +424,10 @@ struct bnx2x_vfdb {
 	/* the number of msix vectors belonging to this PF designated for VFs */
 	u16 vf_sbs_pool;
 	u16 first_vf_igu_entry;
+
+	/* sp_rtnl synchronization */
+	struct mutex			event_mutex;
+	u64				event_occur;
 };
 
 /* queue access */
@@ -476,13 +477,14 @@ void bnx2x_iov_init_dq(struct bnx2x *bp);
 void bnx2x_iov_init_dmae(struct bnx2x *bp);
 void bnx2x_iov_set_queue_sp_obj(struct bnx2x *bp, int vf_cid,
 				struct bnx2x_queue_sp_obj **q_obj);
-void bnx2x_iov_sp_event(struct bnx2x *bp, int vf_cid, bool queue_work);
+void bnx2x_iov_sp_event(struct bnx2x *bp, int vf_cid);
 int bnx2x_iov_eq_sp_event(struct bnx2x *bp, union event_ring_elem *elem);
 void bnx2x_iov_adjust_stats_req(struct bnx2x *bp);
 void bnx2x_iov_storm_stats_update(struct bnx2x *bp);
-void bnx2x_iov_sp_task(struct bnx2x *bp);
 /* global vf mailbox routines */
-void bnx2x_vf_mbx(struct bnx2x *bp, struct vf_pf_event_data *vfpf_event);
+void bnx2x_vf_mbx(struct bnx2x *bp);
+void bnx2x_vf_mbx_schedule(struct bnx2x *bp,
+			   struct vf_pf_event_data *vfpf_event);
 void bnx2x_vf_enable_mbx(struct bnx2x *bp, u8 abs_vfid);
 
 /* CORE VF API */
@@ -520,7 +522,8 @@ enum {
 		else {							\
 			DP(BNX2X_MSG_IOV, "no ramrod. Scheduling\n");	\
 			atomic_set(&vf->op_in_progress, 1);		\
-			queue_delayed_work(bnx2x_wq, &bp->sp_task, 0);  \
+			bnx2x_schedule_iov_task(bp,			\
+						BNX2X_IOV_CONT_VFOP);	\
 			return;						\
 		}							\
 	} while (0)
@@ -785,18 +788,21 @@ void bnx2x_pf_set_vfs_vlan(struct bnx2x *bp);
 int bnx2x_sriov_configure(struct pci_dev *dev, int num_vfs);
 void bnx2x_iov_channel_down(struct bnx2x *bp);
 
+void bnx2x_iov_task(struct work_struct *work);
+
+void bnx2x_schedule_iov_task(struct bnx2x *bp, enum bnx2x_iov_flag flag);
+
 #else /* CONFIG_BNX2X_SRIOV */
 
 static inline void bnx2x_iov_set_queue_sp_obj(struct bnx2x *bp, int vf_cid,
 				struct bnx2x_queue_sp_obj **q_obj) {}
-static inline void bnx2x_iov_sp_event(struct bnx2x *bp, int vf_cid,
-				      bool queue_work) {}
+static inline void bnx2x_iov_sp_event(struct bnx2x *bp, int vf_cid) {}
 static inline void bnx2x_vf_handle_flr_event(struct bnx2x *bp) {}
 static inline int bnx2x_iov_eq_sp_event(struct bnx2x *bp,
 					union event_ring_elem *elem) {return 1; }
-static inline void bnx2x_iov_sp_task(struct bnx2x *bp) {}
-static inline void bnx2x_vf_mbx(struct bnx2x *bp,
-				struct vf_pf_event_data *vfpf_event) {}
+static inline void bnx2x_vf_mbx(struct bnx2x *bp) {}
+static inline void bnx2x_vf_mbx_schedule(struct bnx2x *bp,
+					 struct vf_pf_event_data *vfpf_event) {}
 static inline int bnx2x_iov_init_ilt(struct bnx2x *bp, u16 line) {return line; }
 static inline void bnx2x_iov_init_dq(struct bnx2x *bp) {}
 static inline int bnx2x_iov_alloc_mem(struct bnx2x *bp) {return 0; }
@@ -843,5 +849,8 @@ static inline void bnx2x_pf_set_vfs_vlan(struct bnx2x *bp) {}
 static inline int bnx2x_sriov_configure(struct pci_dev *dev, int num_vfs) {return 0; }
 static inline void bnx2x_iov_channel_down(struct bnx2x *bp) {}
 
+static inline void bnx2x_iov_task(struct work_struct *work) {}
+void bnx2x_schedule_iov_task(struct bnx2x *bp, enum bnx2x_iov_flag flag) {}
+
 #endif /* CONFIG_BNX2X_SRIOV */
 #endif /* bnx2x_sriov.h */
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c
index 1117ed7776b6..63c95658ba60 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c
@@ -1089,9 +1089,6 @@ static void bnx2x_vf_mbx_resp_send_msg(struct bnx2x *bp,
 	storm_memset_vf_mbx_ack(bp, vf->abs_vfid);
 	mmiowb();
 
-	/* initiate dmae to send the response */
-	mbx->flags &= ~VF_MSG_INPROCESS;
-
 	/* copy the response header including status-done field,
 	 * must be last dmae, must be after FW is acked
 	 */
@@ -2059,13 +2056,10 @@ static void bnx2x_vf_mbx_request(struct bnx2x *bp, struct bnx2x_virtf *vf,
 	}
 }
 
-/* handle new vf-pf message */
-void bnx2x_vf_mbx(struct bnx2x *bp, struct vf_pf_event_data *vfpf_event)
+void bnx2x_vf_mbx_schedule(struct bnx2x *bp,
+			   struct vf_pf_event_data *vfpf_event)
 {
-	struct bnx2x_virtf *vf;
-	struct bnx2x_vf_mbx *mbx;
 	u8 vf_idx;
-	int rc;
 
 	DP(BNX2X_MSG_IOV,
 	   "vf pf event received: vfid %d, address_hi %x, address lo %x",
@@ -2077,50 +2071,73 @@ void bnx2x_vf_mbx(struct bnx2x *bp, struct vf_pf_event_data *vfpf_event)
 	    BNX2X_NR_VIRTFN(bp)) {
 		BNX2X_ERR("Illegal vf_id %d max allowed: %d\n",
 			  vfpf_event->vf_id, BNX2X_NR_VIRTFN(bp));
-		goto mbx_done;
+		return;
 	}
+
 	vf_idx = bnx2x_vf_idx_by_abs_fid(bp, vfpf_event->vf_id);
-	mbx = BP_VF_MBX(bp, vf_idx);
 
-	/* verify an event is not currently being processed -
-	 * debug failsafe only
-	 */
-	if (mbx->flags & VF_MSG_INPROCESS) {
-		BNX2X_ERR("Previous message is still being processed, vf_id %d\n",
-			  vfpf_event->vf_id);
-		goto mbx_done;
-	}
-	vf = BP_VF(bp, vf_idx);
+	/* Update VFDB with current message and schedule its handling */
+	mutex_lock(&BP_VFDB(bp)->event_mutex);
+	BP_VF_MBX(bp, vf_idx)->vf_addr_hi = vfpf_event->msg_addr_hi;
+	BP_VF_MBX(bp, vf_idx)->vf_addr_lo = vfpf_event->msg_addr_lo;
+	BP_VFDB(bp)->event_occur |= (1ULL << vf_idx);
+	mutex_unlock(&BP_VFDB(bp)->event_mutex);
 
-	/* save the VF message address */
-	mbx->vf_addr_hi = vfpf_event->msg_addr_hi;
-	mbx->vf_addr_lo = vfpf_event->msg_addr_lo;
-	DP(BNX2X_MSG_IOV, "mailbox vf address hi 0x%x, lo 0x%x, offset 0x%x\n",
-	   mbx->vf_addr_hi, mbx->vf_addr_lo, mbx->first_tlv.resp_msg_offset);
+	bnx2x_schedule_iov_task(bp, BNX2X_IOV_HANDLE_VF_MSG);
+}
 
-	/* dmae to get the VF request */
-	rc = bnx2x_copy32_vf_dmae(bp, true, mbx->msg_mapping, vf->abs_vfid,
-				  mbx->vf_addr_hi, mbx->vf_addr_lo,
-				  sizeof(union vfpf_tlvs)/4);
-	if (rc) {
-		BNX2X_ERR("Failed to copy request VF %d\n", vf->abs_vfid);
-		goto mbx_error;
-	}
+/* handle new vf-pf messages */
+void bnx2x_vf_mbx(struct bnx2x *bp)
+{
+	struct bnx2x_vfdb *vfdb = BP_VFDB(bp);
+	u64 events;
+	u8 vf_idx;
+	int rc;
 
-	/* process the VF message header */
-	mbx->first_tlv = mbx->msg->req.first_tlv;
+	if (!vfdb)
+		return;
 
-	/* Clean response buffer to refrain from falsely seeing chains */
-	memset(&mbx->msg->resp, 0, sizeof(union pfvf_tlvs));
+	mutex_lock(&vfdb->event_mutex);
+	events = vfdb->event_occur;
+	vfdb->event_occur = 0;
+	mutex_unlock(&vfdb->event_mutex);
 
-	/* dispatch the request (will prepare the response) */
-	bnx2x_vf_mbx_request(bp, vf, mbx);
-	goto mbx_done;
+	for_each_vf(bp, vf_idx) {
+		struct bnx2x_vf_mbx *mbx = BP_VF_MBX(bp, vf_idx);
+		struct bnx2x_virtf *vf = BP_VF(bp, vf_idx);
 
-mbx_error:
-	bnx2x_vf_release(bp, vf, false); /* non blocking */
-mbx_done:
-	return;
+		/* Handle VFs which have pending events */
+		if (!(events & (1ULL << vf_idx)))
+			continue;
+
+		DP(BNX2X_MSG_IOV,
+		   "Handling vf pf event vfid %d, address: [%x:%x], resp_offset 0x%x\n",
+		   vf_idx, mbx->vf_addr_hi, mbx->vf_addr_lo,
+		   mbx->first_tlv.resp_msg_offset);
+
+		/* dmae to get the VF request */
+		rc = bnx2x_copy32_vf_dmae(bp, true, mbx->msg_mapping,
+					  vf->abs_vfid, mbx->vf_addr_hi,
+					  mbx->vf_addr_lo,
+					  sizeof(union vfpf_tlvs)/4);
+		if (rc) {
+			BNX2X_ERR("Failed to copy request VF %d\n",
+				  vf->abs_vfid);
+			bnx2x_vf_release(bp, vf, false); /* non blocking */
+			return;
+		}
+
+		/* process the VF message header */
+		mbx->first_tlv = mbx->msg->req.first_tlv;
+
+		/* Clean response buffer to refrain from falsely
+		 * seeing chains.
+		 */
+		memset(&mbx->msg->resp, 0, sizeof(union pfvf_tlvs));
+
+		/* dispatch the request (will prepare the response) */
+		bnx2x_vf_mbx_request(bp, vf, mbx);
+	}
 }
 
 /* propagate local bulletin board to vf */
-- 
cgit v1.2.2


From 2dc33bbc4f8a5d6a05bf3c673b86c37b825450f3 Mon Sep 17 00:00:00 2001
From: Yuval Mintz <Yuval.Mintz@qlogic.com>
Date: Sun, 23 Mar 2014 18:12:25 +0200
Subject: bnx2x: Remove the sriov VFOP mechanism

Since we now posses a workqueue dedicated for sriov, the paradigm that sriov-
related tasks cannot sleep is no longer correct.

The VFOP mechanism was the one previously supporting said paradigm - the sriov
related tasks were broken into segments which did not require sleep, and the
mechanism re-scheduled the next segment whenever possible.

This patch remvoes the VFOP mechanism altogether - the resulting code is a much
easier to follow code; The segments are gathered into straight-forward
functions which sleep whenever neccessary.

Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x.h       |    1 -
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c  |    2 -
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c | 1804 +++++----------------
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h |  348 +---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c  |  421 ++---
 5 files changed, 622 insertions(+), 1954 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
index 8e35dbaca76e..4d8f8aba0ea5 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -1414,7 +1414,6 @@ enum sp_rtnl_flag {
 
 enum bnx2x_iov_flag {
 	BNX2X_IOV_HANDLE_VF_MSG,
-	BNX2X_IOV_CONT_VFOP,
 	BNX2X_IOV_HANDLE_FLR,
 };
 
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index b5c7f77e8108..a78edaccceee 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -1857,8 +1857,6 @@ void bnx2x_sp_event(struct bnx2x_fastpath *fp, union eth_rx_cqe *rr_cqe)
 #else
 		return;
 #endif
-	/* SRIOV: reschedule any 'in_progress' operations */
-	bnx2x_iov_sp_event(bp, cid);
 
 	smp_mb__before_atomic_inc();
 	atomic_inc(&bp->cq_spq_left);
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
index 8e2b191234f1..df1507288b3c 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
@@ -117,87 +117,7 @@ static bool bnx2x_validate_vf_sp_objs(struct bnx2x *bp,
 	return true;
 }
 
-/* VFOP - VF slow-path operation support */
-
-#define BNX2X_VFOP_FILTER_ADD_CNT_MAX		0x10000
-
 /* VFOP operations states */
-enum bnx2x_vfop_qctor_state {
-	   BNX2X_VFOP_QCTOR_INIT,
-	   BNX2X_VFOP_QCTOR_SETUP,
-	   BNX2X_VFOP_QCTOR_INT_EN
-};
-
-enum bnx2x_vfop_qdtor_state {
-	   BNX2X_VFOP_QDTOR_HALT,
-	   BNX2X_VFOP_QDTOR_TERMINATE,
-	   BNX2X_VFOP_QDTOR_CFCDEL,
-	   BNX2X_VFOP_QDTOR_DONE
-};
-
-enum bnx2x_vfop_vlan_mac_state {
-	   BNX2X_VFOP_VLAN_MAC_CONFIG_SINGLE,
-	   BNX2X_VFOP_VLAN_MAC_CLEAR,
-	   BNX2X_VFOP_VLAN_MAC_CHK_DONE,
-	   BNX2X_VFOP_MAC_CONFIG_LIST,
-	   BNX2X_VFOP_VLAN_CONFIG_LIST,
-	   BNX2X_VFOP_VLAN_CONFIG_LIST_0
-};
-
-enum bnx2x_vfop_qsetup_state {
-	   BNX2X_VFOP_QSETUP_CTOR,
-	   BNX2X_VFOP_QSETUP_VLAN0,
-	   BNX2X_VFOP_QSETUP_DONE
-};
-
-enum bnx2x_vfop_mcast_state {
-	   BNX2X_VFOP_MCAST_DEL,
-	   BNX2X_VFOP_MCAST_ADD,
-	   BNX2X_VFOP_MCAST_CHK_DONE
-};
-enum bnx2x_vfop_qflr_state {
-	   BNX2X_VFOP_QFLR_CLR_VLAN,
-	   BNX2X_VFOP_QFLR_CLR_MAC,
-	   BNX2X_VFOP_QFLR_TERMINATE,
-	   BNX2X_VFOP_QFLR_DONE
-};
-
-enum bnx2x_vfop_flr_state {
-	   BNX2X_VFOP_FLR_QUEUES,
-	   BNX2X_VFOP_FLR_HW
-};
-
-enum bnx2x_vfop_close_state {
-	   BNX2X_VFOP_CLOSE_QUEUES,
-	   BNX2X_VFOP_CLOSE_HW
-};
-
-enum bnx2x_vfop_rxmode_state {
-	   BNX2X_VFOP_RXMODE_CONFIG,
-	   BNX2X_VFOP_RXMODE_DONE
-};
-
-enum bnx2x_vfop_qteardown_state {
-	   BNX2X_VFOP_QTEARDOWN_RXMODE,
-	   BNX2X_VFOP_QTEARDOWN_CLR_VLAN,
-	   BNX2X_VFOP_QTEARDOWN_CLR_MAC,
-	   BNX2X_VFOP_QTEARDOWN_CLR_MCAST,
-	   BNX2X_VFOP_QTEARDOWN_QDTOR,
-	   BNX2X_VFOP_QTEARDOWN_DONE
-};
-
-enum bnx2x_vfop_rss_state {
-	   BNX2X_VFOP_RSS_CONFIG,
-	   BNX2X_VFOP_RSS_DONE
-};
-
-enum bnx2x_vfop_tpa_state {
-	   BNX2X_VFOP_TPA_CONFIG,
-	   BNX2X_VFOP_TPA_DONE
-};
-
-#define bnx2x_vfop_reset_wq(vf)	atomic_set(&vf->op_in_progress, 0)
-
 void bnx2x_vfop_qctor_dump_tx(struct bnx2x *bp, struct bnx2x_virtf *vf,
 			      struct bnx2x_queue_init_params *init_params,
 			      struct bnx2x_queue_setup_params *setup_params,
@@ -241,7 +161,7 @@ void bnx2x_vfop_qctor_dump_rx(struct bnx2x *bp, struct bnx2x_virtf *vf,
 void bnx2x_vfop_qctor_prep(struct bnx2x *bp,
 			   struct bnx2x_virtf *vf,
 			   struct bnx2x_vf_queue *q,
-			   struct bnx2x_vfop_qctor_params *p,
+			   struct bnx2x_vf_queue_construct_params *p,
 			   unsigned long q_type)
 {
 	struct bnx2x_queue_init_params *init_p = &p->qstate.params.init;
@@ -310,191 +230,85 @@ void bnx2x_vfop_qctor_prep(struct bnx2x *bp,
 	}
 }
 
-/* VFOP queue construction */
-static void bnx2x_vfop_qctor(struct bnx2x *bp, struct bnx2x_virtf *vf)
+static int bnx2x_vf_queue_create(struct bnx2x *bp,
+				 struct bnx2x_virtf *vf, int qid,
+				 struct bnx2x_vf_queue_construct_params *qctor)
 {
-	struct bnx2x_vfop *vfop = bnx2x_vfop_cur(bp, vf);
-	struct bnx2x_vfop_args_qctor *args = &vfop->args.qctor;
-	struct bnx2x_queue_state_params *q_params = &vfop->op_p->qctor.qstate;
-	enum bnx2x_vfop_qctor_state state = vfop->state;
-
-	bnx2x_vfop_reset_wq(vf);
-
-	if (vfop->rc < 0)
-		goto op_err;
-
-	DP(BNX2X_MSG_IOV, "vf[%d] STATE: %d\n", vf->abs_vfid, state);
-
-	switch (state) {
-	case BNX2X_VFOP_QCTOR_INIT:
-
-		/* has this queue already been opened? */
-		if (bnx2x_get_q_logical_state(bp, q_params->q_obj) ==
-		    BNX2X_Q_LOGICAL_STATE_ACTIVE) {
-			DP(BNX2X_MSG_IOV,
-			   "Entered qctor but queue was already up. Aborting gracefully\n");
-			goto op_done;
-		}
-
-		/* next state */
-		vfop->state = BNX2X_VFOP_QCTOR_SETUP;
-
-		q_params->cmd = BNX2X_Q_CMD_INIT;
-		vfop->rc = bnx2x_queue_state_change(bp, q_params);
-
-		bnx2x_vfop_finalize(vf, vfop->rc, VFOP_CONT);
-
-	case BNX2X_VFOP_QCTOR_SETUP:
-		/* next state */
-		vfop->state = BNX2X_VFOP_QCTOR_INT_EN;
-
-		/* copy pre-prepared setup params to the queue-state params */
-		vfop->op_p->qctor.qstate.params.setup =
-			vfop->op_p->qctor.prep_qsetup;
-
-		q_params->cmd = BNX2X_Q_CMD_SETUP;
-		vfop->rc = bnx2x_queue_state_change(bp, q_params);
+	struct bnx2x_queue_state_params *q_params;
+	int rc = 0;
 
-		bnx2x_vfop_finalize(vf, vfop->rc, VFOP_CONT);
+	DP(BNX2X_MSG_IOV, "vf[%d:%d]\n", vf->abs_vfid, qid);
 
-	case BNX2X_VFOP_QCTOR_INT_EN:
+	/* Prepare ramrod information */
+	q_params = &qctor->qstate;
+	q_params->q_obj = &bnx2x_vfq(vf, qid, sp_obj);
+	set_bit(RAMROD_COMP_WAIT, &q_params->ramrod_flags);
 
-		/* enable interrupts */
-		bnx2x_vf_igu_ack_sb(bp, vf, vf_igu_sb(vf, args->sb_idx),
-				    USTORM_ID, 0, IGU_INT_ENABLE, 0);
-		goto op_done;
-	default:
-		bnx2x_vfop_default(state);
+	if (bnx2x_get_q_logical_state(bp, q_params->q_obj) ==
+	    BNX2X_Q_LOGICAL_STATE_ACTIVE) {
+		DP(BNX2X_MSG_IOV, "queue was already up. Aborting gracefully\n");
+		goto out;
 	}
-op_err:
-	BNX2X_ERR("QCTOR[%d:%d] error: cmd %d, rc %d\n",
-		  vf->abs_vfid, args->qid, q_params->cmd, vfop->rc);
-op_done:
-	bnx2x_vfop_end(bp, vf, vfop);
-op_pending:
-	return;
-}
-
-static int bnx2x_vfop_qctor_cmd(struct bnx2x *bp,
-				struct bnx2x_virtf *vf,
-				struct bnx2x_vfop_cmd *cmd,
-				int qid)
-{
-	struct bnx2x_vfop *vfop = bnx2x_vfop_add(bp, vf);
 
-	if (vfop) {
-		vf->op_params.qctor.qstate.q_obj = &bnx2x_vfq(vf, qid, sp_obj);
+	/* Run Queue 'construction' ramrods */
+	q_params->cmd = BNX2X_Q_CMD_INIT;
+	rc = bnx2x_queue_state_change(bp, q_params);
+	if (rc)
+		goto out;
 
-		vfop->args.qctor.qid = qid;
-		vfop->args.qctor.sb_idx = bnx2x_vfq(vf, qid, sb_idx);
+	memcpy(&q_params->params.setup, &qctor->prep_qsetup,
+	       sizeof(struct bnx2x_queue_setup_params));
+	q_params->cmd = BNX2X_Q_CMD_SETUP;
+	rc = bnx2x_queue_state_change(bp, q_params);
+	if (rc)
+		goto out;
 
-		bnx2x_vfop_opset(BNX2X_VFOP_QCTOR_INIT,
-				 bnx2x_vfop_qctor, cmd->done);
-		return bnx2x_vfop_transition(bp, vf, bnx2x_vfop_qctor,
-					     cmd->block);
-	}
-	return -ENOMEM;
+	/* enable interrupts */
+	bnx2x_vf_igu_ack_sb(bp, vf, vf_igu_sb(vf, bnx2x_vfq(vf, qid, sb_idx)),
+			    USTORM_ID, 0, IGU_INT_ENABLE, 0);
+out:
+	return rc;
 }
 
-/* VFOP queue destruction */
-static void bnx2x_vfop_qdtor(struct bnx2x *bp, struct bnx2x_virtf *vf)
+static int bnx2x_vf_queue_destroy(struct bnx2x *bp, struct bnx2x_virtf *vf,
+				  int qid)
 {
-	struct bnx2x_vfop *vfop = bnx2x_vfop_cur(bp, vf);
-	struct bnx2x_vfop_args_qdtor *qdtor = &vfop->args.qdtor;
-	struct bnx2x_queue_state_params *q_params = &vfop->op_p->qctor.qstate;
-	enum bnx2x_vfop_qdtor_state state = vfop->state;
-
-	bnx2x_vfop_reset_wq(vf);
-
-	if (vfop->rc < 0)
-		goto op_err;
-
-	DP(BNX2X_MSG_IOV, "vf[%d] STATE: %d\n", vf->abs_vfid, state);
-
-	switch (state) {
-	case BNX2X_VFOP_QDTOR_HALT:
-
-		/* has this queue already been stopped? */
-		if (bnx2x_get_q_logical_state(bp, q_params->q_obj) ==
-		    BNX2X_Q_LOGICAL_STATE_STOPPED) {
-			DP(BNX2X_MSG_IOV,
-			   "Entered qdtor but queue was already stopped. Aborting gracefully\n");
-
-			/* next state */
-			vfop->state = BNX2X_VFOP_QDTOR_DONE;
-
-			bnx2x_vfop_finalize(vf, vfop->rc, VFOP_CONT);
-		}
-
-		/* next state */
-		vfop->state = BNX2X_VFOP_QDTOR_TERMINATE;
-
-		q_params->cmd = BNX2X_Q_CMD_HALT;
-		vfop->rc = bnx2x_queue_state_change(bp, q_params);
-
-		bnx2x_vfop_finalize(vf, vfop->rc, VFOP_CONT);
-
-	case BNX2X_VFOP_QDTOR_TERMINATE:
-		/* next state */
-		vfop->state = BNX2X_VFOP_QDTOR_CFCDEL;
-
-		q_params->cmd = BNX2X_Q_CMD_TERMINATE;
-		vfop->rc = bnx2x_queue_state_change(bp, q_params);
+	enum bnx2x_queue_cmd cmds[] = {BNX2X_Q_CMD_HALT,
+				       BNX2X_Q_CMD_TERMINATE,
+				       BNX2X_Q_CMD_CFC_DEL};
+	struct bnx2x_queue_state_params q_params;
+	int rc, i;
 
-		bnx2x_vfop_finalize(vf, vfop->rc, VFOP_CONT);
+	DP(BNX2X_MSG_IOV, "vf[%d]\n", vf->abs_vfid);
 
-	case BNX2X_VFOP_QDTOR_CFCDEL:
-		/* next state */
-		vfop->state = BNX2X_VFOP_QDTOR_DONE;
+	/* Prepare ramrod information */
+	memset(&q_params, 0, sizeof(struct bnx2x_queue_state_params));
+	q_params.q_obj = &bnx2x_vfq(vf, qid, sp_obj);
+	set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags);
 
-		q_params->cmd = BNX2X_Q_CMD_CFC_DEL;
-		vfop->rc = bnx2x_queue_state_change(bp, q_params);
+	if (bnx2x_get_q_logical_state(bp, q_params.q_obj) ==
+	    BNX2X_Q_LOGICAL_STATE_STOPPED) {
+		DP(BNX2X_MSG_IOV, "queue was already stopped. Aborting gracefully\n");
+		goto out;
+	}
 
-		bnx2x_vfop_finalize(vf, vfop->rc, VFOP_DONE);
-op_err:
-	BNX2X_ERR("QDTOR[%d:%d] error: cmd %d, rc %d\n",
-		  vf->abs_vfid, qdtor->qid, q_params->cmd, vfop->rc);
-op_done:
-	case BNX2X_VFOP_QDTOR_DONE:
-		/* invalidate the context */
-		if (qdtor->cxt) {
-			qdtor->cxt->ustorm_ag_context.cdu_usage = 0;
-			qdtor->cxt->xstorm_ag_context.cdu_reserved = 0;
+	/* Run Queue 'destruction' ramrods */
+	for (i = 0; i < ARRAY_SIZE(cmds); i++) {
+		q_params.cmd = cmds[i];
+		rc = bnx2x_queue_state_change(bp, &q_params);
+		if (rc) {
+			BNX2X_ERR("Failed to run Queue command %d\n", cmds[i]);
+			return rc;
 		}
-		bnx2x_vfop_end(bp, vf, vfop);
-		return;
-	default:
-		bnx2x_vfop_default(state);
 	}
-op_pending:
-	return;
-}
-
-static int bnx2x_vfop_qdtor_cmd(struct bnx2x *bp,
-				struct bnx2x_virtf *vf,
-				struct bnx2x_vfop_cmd *cmd,
-				int qid)
-{
-	struct bnx2x_vfop *vfop = bnx2x_vfop_add(bp, vf);
-
-	if (vfop) {
-		struct bnx2x_queue_state_params *qstate =
-			&vf->op_params.qctor.qstate;
-
-		memset(qstate, 0, sizeof(*qstate));
-		qstate->q_obj = &bnx2x_vfq(vf, qid, sp_obj);
-
-		vfop->args.qdtor.qid = qid;
-		vfop->args.qdtor.cxt = bnx2x_vfq(vf, qid, cxt);
-
-		bnx2x_vfop_opset(BNX2X_VFOP_QDTOR_HALT,
-				 bnx2x_vfop_qdtor, cmd->done);
-		return bnx2x_vfop_transition(bp, vf, bnx2x_vfop_qdtor,
-					     cmd->block);
-	} else {
-		BNX2X_ERR("VF[%d] failed to add a vfop\n", vf->abs_vfid);
-		return -ENOMEM;
+out:
+	/* Clean Context */
+	if (bnx2x_vfq(vf, qid, cxt)) {
+		bnx2x_vfq(vf, qid, cxt)->ustorm_ag_context.cdu_usage = 0;
+		bnx2x_vfq(vf, qid, cxt)->xstorm_ag_context.cdu_reserved = 0;
 	}
+
+	return 0;
 }
 
 static void
@@ -516,731 +330,291 @@ bnx2x_vf_set_igu_info(struct bnx2x *bp, u8 igu_sb_id, u8 abs_vfid)
 	BP_VFDB(bp)->vf_sbs_pool++;
 }
 
-/* VFOP MAC/VLAN helpers */
-static inline void bnx2x_vfop_credit(struct bnx2x *bp,
-				     struct bnx2x_vfop *vfop,
-				     struct bnx2x_vlan_mac_obj *obj)
+static inline void bnx2x_vf_vlan_credit(struct bnx2x *bp,
+					struct bnx2x_vlan_mac_obj *obj,
+					atomic_t *counter)
 {
-	struct bnx2x_vfop_args_filters *args = &vfop->args.filters;
-
-	/* update credit only if there is no error
-	 * and a valid credit counter
-	 */
-	if (!vfop->rc && args->credit) {
-		struct list_head *pos;
-		int read_lock;
-		int cnt = 0;
+	struct list_head *pos;
+	int read_lock;
+	int cnt = 0;
 
-		read_lock = bnx2x_vlan_mac_h_read_lock(bp, obj);
-		if (read_lock)
-			DP(BNX2X_MSG_SP, "Failed to take vlan mac read head; continuing anyway\n");
+	read_lock = bnx2x_vlan_mac_h_read_lock(bp, obj);
+	if (read_lock)
+		DP(BNX2X_MSG_SP, "Failed to take vlan mac read head; continuing anyway\n");
 
-		list_for_each(pos, &obj->head)
-			cnt++;
+	list_for_each(pos, &obj->head)
+		cnt++;
 
-		if (!read_lock)
-			bnx2x_vlan_mac_h_read_unlock(bp, obj);
+	if (!read_lock)
+		bnx2x_vlan_mac_h_read_unlock(bp, obj);
 
-		atomic_set(args->credit, cnt);
-	}
+	atomic_set(counter, cnt);
 }
 
-static int bnx2x_vfop_set_user_req(struct bnx2x *bp,
-				    struct bnx2x_vfop_filter *pos,
-				    struct bnx2x_vlan_mac_data *user_req)
+static int bnx2x_vf_vlan_mac_clear(struct bnx2x *bp, struct bnx2x_virtf *vf,
+				   int qid, bool drv_only, bool mac)
 {
-	user_req->cmd = pos->add ? BNX2X_VLAN_MAC_ADD :
-		BNX2X_VLAN_MAC_DEL;
-
-	switch (pos->type) {
-	case BNX2X_VFOP_FILTER_MAC:
-		memcpy(user_req->u.mac.mac, pos->mac, ETH_ALEN);
-		break;
-	case BNX2X_VFOP_FILTER_VLAN:
-		user_req->u.vlan.vlan = pos->vid;
-		break;
-	default:
-		BNX2X_ERR("Invalid filter type, skipping\n");
-		return 1;
-	}
-	return 0;
-}
-
-static int bnx2x_vfop_config_list(struct bnx2x *bp,
-				  struct bnx2x_vfop_filters *filters,
-				  struct bnx2x_vlan_mac_ramrod_params *vlan_mac)
-{
-	struct bnx2x_vfop_filter *pos, *tmp;
-	struct list_head rollback_list, *filters_list = &filters->head;
-	struct bnx2x_vlan_mac_data *user_req = &vlan_mac->user_req;
-	int rc = 0, cnt = 0;
-
-	INIT_LIST_HEAD(&rollback_list);
-
-	list_for_each_entry_safe(pos, tmp, filters_list, link) {
-		if (bnx2x_vfop_set_user_req(bp, pos, user_req))
-			continue;
+	struct bnx2x_vlan_mac_ramrod_params ramrod;
+	int rc;
 
-		rc = bnx2x_config_vlan_mac(bp, vlan_mac);
-		if (rc >= 0) {
-			cnt += pos->add ? 1 : -1;
-			list_move(&pos->link, &rollback_list);
-			rc = 0;
-		} else if (rc == -EEXIST) {
-			rc = 0;
-		} else {
-			BNX2X_ERR("Failed to add a new vlan_mac command\n");
-			break;
-		}
-	}
+	DP(BNX2X_MSG_IOV, "vf[%d] - deleting all %s\n", vf->abs_vfid,
+	   mac ? "MACs" : "VLANs");
 
-	/* rollback if error or too many rules added */
-	if (rc || cnt > filters->add_cnt) {
-		BNX2X_ERR("error or too many rules added. Performing rollback\n");
-		list_for_each_entry_safe(pos, tmp, &rollback_list, link) {
-			pos->add = !pos->add;	/* reverse op */
-			bnx2x_vfop_set_user_req(bp, pos, user_req);
-			bnx2x_config_vlan_mac(bp, vlan_mac);
-			list_del(&pos->link);
-		}
-		cnt = 0;
-		if (!rc)
-			rc = -EINVAL;
+	/* Prepare ramrod params */
+	memset(&ramrod, 0, sizeof(struct bnx2x_vlan_mac_ramrod_params));
+	if (mac) {
+		set_bit(BNX2X_ETH_MAC, &ramrod.user_req.vlan_mac_flags);
+		ramrod.vlan_mac_obj = &bnx2x_vfq(vf, qid, mac_obj);
+	} else {
+		set_bit(BNX2X_DONT_CONSUME_CAM_CREDIT,
+			&ramrod.user_req.vlan_mac_flags);
+		ramrod.vlan_mac_obj = &bnx2x_vfq(vf, qid, vlan_obj);
 	}
-	filters->add_cnt = cnt;
-	return rc;
-}
-
-/* VFOP set VLAN/MAC */
-static void bnx2x_vfop_vlan_mac(struct bnx2x *bp, struct bnx2x_virtf *vf)
-{
-	struct bnx2x_vfop *vfop = bnx2x_vfop_cur(bp, vf);
-	struct bnx2x_vlan_mac_ramrod_params *vlan_mac = &vfop->op_p->vlan_mac;
-	struct bnx2x_vlan_mac_obj *obj = vlan_mac->vlan_mac_obj;
-	struct bnx2x_vfop_filters *filters = vfop->args.filters.multi_filter;
-
-	enum bnx2x_vfop_vlan_mac_state state = vfop->state;
-
-	if (vfop->rc < 0)
-		goto op_err;
-
-	DP(BNX2X_MSG_IOV, "vf[%d] STATE: %d\n", vf->abs_vfid, state);
-
-	bnx2x_vfop_reset_wq(vf);
-
-	switch (state) {
-	case BNX2X_VFOP_VLAN_MAC_CLEAR:
-		/* next state */
-		vfop->state = BNX2X_VFOP_VLAN_MAC_CHK_DONE;
-
-		/* do delete */
-		vfop->rc = obj->delete_all(bp, obj,
-					   &vlan_mac->user_req.vlan_mac_flags,
-					   &vlan_mac->ramrod_flags);
-
-		bnx2x_vfop_finalize(vf, vfop->rc, VFOP_CONT);
-
-	case BNX2X_VFOP_VLAN_MAC_CONFIG_SINGLE:
-		/* next state */
-		vfop->state = BNX2X_VFOP_VLAN_MAC_CHK_DONE;
-
-		/* do config */
-		vfop->rc = bnx2x_config_vlan_mac(bp, vlan_mac);
-		if (vfop->rc == -EEXIST)
-			vfop->rc = 0;
+	ramrod.user_req.cmd = BNX2X_VLAN_MAC_DEL;
 
-		bnx2x_vfop_finalize(vf, vfop->rc, VFOP_CONT);
-
-	case BNX2X_VFOP_VLAN_MAC_CHK_DONE:
-		vfop->rc = !!obj->raw.check_pending(&obj->raw);
-		bnx2x_vfop_finalize(vf, vfop->rc, VFOP_DONE);
-
-	case BNX2X_VFOP_MAC_CONFIG_LIST:
-		/* next state */
-		vfop->state = BNX2X_VFOP_VLAN_MAC_CHK_DONE;
-
-		/* do list config */
-		vfop->rc = bnx2x_vfop_config_list(bp, filters, vlan_mac);
-		if (vfop->rc)
-			goto op_err;
-
-		set_bit(RAMROD_CONT, &vlan_mac->ramrod_flags);
-		vfop->rc = bnx2x_config_vlan_mac(bp, vlan_mac);
-		bnx2x_vfop_finalize(vf, vfop->rc, VFOP_CONT);
-
-	case BNX2X_VFOP_VLAN_CONFIG_LIST:
-		/* next state */
-		vfop->state = BNX2X_VFOP_VLAN_MAC_CHK_DONE;
-
-		/* do list config */
-		vfop->rc = bnx2x_vfop_config_list(bp, filters, vlan_mac);
-		if (!vfop->rc) {
-			set_bit(RAMROD_CONT, &vlan_mac->ramrod_flags);
-			vfop->rc = bnx2x_config_vlan_mac(bp, vlan_mac);
-		}
-		bnx2x_vfop_finalize(vf, vfop->rc, VFOP_CONT);
+	set_bit(RAMROD_EXEC, &ramrod.ramrod_flags);
+	if (drv_only)
+		set_bit(RAMROD_DRV_CLR_ONLY, &ramrod.ramrod_flags);
+	else
+		set_bit(RAMROD_COMP_WAIT, &ramrod.ramrod_flags);
 
-	default:
-		bnx2x_vfop_default(state);
+	/* Start deleting */
+	rc = ramrod.vlan_mac_obj->delete_all(bp,
+					     ramrod.vlan_mac_obj,
+					     &ramrod.user_req.vlan_mac_flags,
+					     &ramrod.ramrod_flags);
+	if (rc) {
+		BNX2X_ERR("Failed to delete all %s\n",
+			  mac ? "MACs" : "VLANs");
+		return rc;
 	}
-op_err:
-	BNX2X_ERR("VLAN-MAC error: rc %d\n", vfop->rc);
-op_done:
-	kfree(filters);
-	bnx2x_vfop_credit(bp, vfop, obj);
-	bnx2x_vfop_end(bp, vf, vfop);
-op_pending:
-	return;
-}
-
-struct bnx2x_vfop_vlan_mac_flags {
-	bool drv_only;
-	bool dont_consume;
-	bool single_cmd;
-	bool add;
-};
 
-static void
-bnx2x_vfop_vlan_mac_prep_ramrod(struct bnx2x_vlan_mac_ramrod_params *ramrod,
-				struct bnx2x_vfop_vlan_mac_flags *flags)
-{
-	struct bnx2x_vlan_mac_data *ureq = &ramrod->user_req;
-
-	memset(ramrod, 0, sizeof(*ramrod));
+	/* Clear the vlan counters */
+	if (!mac)
+		atomic_set(&bnx2x_vfq(vf, qid, vlan_count), 0);
 
-	/* ramrod flags */
-	if (flags->drv_only)
-		set_bit(RAMROD_DRV_CLR_ONLY, &ramrod->ramrod_flags);
-	if (flags->single_cmd)
-		set_bit(RAMROD_EXEC, &ramrod->ramrod_flags);
-
-	/* mac_vlan flags */
-	if (flags->dont_consume)
-		set_bit(BNX2X_DONT_CONSUME_CAM_CREDIT, &ureq->vlan_mac_flags);
-
-	/* cmd */
-	ureq->cmd = flags->add ? BNX2X_VLAN_MAC_ADD : BNX2X_VLAN_MAC_DEL;
-}
-
-static inline void
-bnx2x_vfop_mac_prep_ramrod(struct bnx2x_vlan_mac_ramrod_params *ramrod,
-			   struct bnx2x_vfop_vlan_mac_flags *flags)
-{
-	bnx2x_vfop_vlan_mac_prep_ramrod(ramrod, flags);
-	set_bit(BNX2X_ETH_MAC, &ramrod->user_req.vlan_mac_flags);
+	return 0;
 }
 
-static int bnx2x_vfop_mac_delall_cmd(struct bnx2x *bp,
-				     struct bnx2x_virtf *vf,
-				     struct bnx2x_vfop_cmd *cmd,
-				     int qid, bool drv_only)
+static int bnx2x_vf_mac_vlan_config(struct bnx2x *bp,
+				    struct bnx2x_virtf *vf, int qid,
+				    struct bnx2x_vf_mac_vlan_filter *filter,
+				    bool drv_only)
 {
-	struct bnx2x_vfop *vfop = bnx2x_vfop_add(bp, vf);
-
-	if (vfop) {
-		struct bnx2x_vfop_args_filters filters = {
-			.multi_filter = NULL,	/* single */
-			.credit = NULL,		/* consume credit */
-		};
-		struct bnx2x_vfop_vlan_mac_flags flags = {
-			.drv_only = drv_only,
-			.dont_consume = (filters.credit != NULL),
-			.single_cmd = true,
-			.add = false /* don't care */,
-		};
-		struct bnx2x_vlan_mac_ramrod_params *ramrod =
-			&vf->op_params.vlan_mac;
-
-		/* set ramrod params */
-		bnx2x_vfop_mac_prep_ramrod(ramrod, &flags);
-
-		/* set object */
-		ramrod->vlan_mac_obj = &bnx2x_vfq(vf, qid, mac_obj);
-
-		/* set extra args */
-		vfop->args.filters = filters;
+	struct bnx2x_vlan_mac_ramrod_params ramrod;
+	int rc;
 
-		bnx2x_vfop_opset(BNX2X_VFOP_VLAN_MAC_CLEAR,
-				 bnx2x_vfop_vlan_mac, cmd->done);
-		return bnx2x_vfop_transition(bp, vf, bnx2x_vfop_vlan_mac,
-					     cmd->block);
+	DP(BNX2X_MSG_IOV, "vf[%d] - %s a %s filter\n",
+	   vf->abs_vfid, filter->add ? "Adding" : "Deleting",
+	   filter->type == BNX2X_VF_FILTER_MAC ? "MAC" : "VLAN");
+
+	/* Prepare ramrod params */
+	memset(&ramrod, 0, sizeof(struct bnx2x_vlan_mac_ramrod_params));
+	if (filter->type == BNX2X_VF_FILTER_VLAN) {
+		set_bit(BNX2X_DONT_CONSUME_CAM_CREDIT,
+			&ramrod.user_req.vlan_mac_flags);
+		ramrod.vlan_mac_obj = &bnx2x_vfq(vf, qid, vlan_obj);
+		ramrod.user_req.u.vlan.vlan = filter->vid;
+	} else {
+		set_bit(BNX2X_ETH_MAC, &ramrod.user_req.vlan_mac_flags);
+		ramrod.vlan_mac_obj = &bnx2x_vfq(vf, qid, mac_obj);
+		memcpy(&ramrod.user_req.u.mac.mac, filter->mac, ETH_ALEN);
+	}
+	ramrod.user_req.cmd = filter->add ? BNX2X_VLAN_MAC_ADD :
+					    BNX2X_VLAN_MAC_DEL;
+
+	/* Verify there are available vlan credits */
+	if (filter->add && filter->type == BNX2X_VF_FILTER_VLAN &&
+	    (atomic_read(&bnx2x_vfq(vf, qid, vlan_count)) >=
+	     vf_vlan_rules_cnt(vf))) {
+		BNX2X_ERR("No credits for vlan\n");
+		return -ENOMEM;
 	}
-	return -ENOMEM;
-}
-
-int bnx2x_vfop_mac_list_cmd(struct bnx2x *bp,
-			    struct bnx2x_virtf *vf,
-			    struct bnx2x_vfop_cmd *cmd,
-			    struct bnx2x_vfop_filters *macs,
-			    int qid, bool drv_only)
-{
-	struct bnx2x_vfop *vfop;
 
-	if (!bnx2x_validate_vf_sp_objs(bp, vf, true))
-			return -EINVAL;
-
-	vfop  = bnx2x_vfop_add(bp, vf);
-	if (vfop) {
-		struct bnx2x_vfop_args_filters filters = {
-			.multi_filter = macs,
-			.credit = NULL,		/* consume credit */
-		};
-		struct bnx2x_vfop_vlan_mac_flags flags = {
-			.drv_only = drv_only,
-			.dont_consume = (filters.credit != NULL),
-			.single_cmd = false,
-			.add = false, /* don't care since only the items in the
-				       * filters list affect the sp operation,
-				       * not the list itself
-				       */
-		};
-		struct bnx2x_vlan_mac_ramrod_params *ramrod =
-			&vf->op_params.vlan_mac;
-
-		/* set ramrod params */
-		bnx2x_vfop_mac_prep_ramrod(ramrod, &flags);
-
-		/* set object */
-		ramrod->vlan_mac_obj = &bnx2x_vfq(vf, qid, mac_obj);
-
-		/* set extra args */
-		filters.multi_filter->add_cnt = BNX2X_VFOP_FILTER_ADD_CNT_MAX;
-		vfop->args.filters = filters;
-
-		bnx2x_vfop_opset(BNX2X_VFOP_MAC_CONFIG_LIST,
-				 bnx2x_vfop_vlan_mac, cmd->done);
-		return bnx2x_vfop_transition(bp, vf, bnx2x_vfop_vlan_mac,
-					     cmd->block);
+	set_bit(RAMROD_EXEC, &ramrod.ramrod_flags);
+	if (drv_only)
+		set_bit(RAMROD_DRV_CLR_ONLY, &ramrod.ramrod_flags);
+	else
+		set_bit(RAMROD_COMP_WAIT, &ramrod.ramrod_flags);
+
+	/* Add/Remove the filter */
+	rc = bnx2x_config_vlan_mac(bp, &ramrod);
+	if (rc && rc != -EEXIST) {
+		BNX2X_ERR("Failed to %s %s\n",
+			  filter->add ? "add" : "delete",
+			  filter->type == BNX2X_VF_FILTER_MAC ? "MAC" :
+								"VLAN");
+		return rc;
 	}
-	return -ENOMEM;
-}
-
-static int bnx2x_vfop_vlan_set_cmd(struct bnx2x *bp,
-				   struct bnx2x_virtf *vf,
-				   struct bnx2x_vfop_cmd *cmd,
-				   int qid, u16 vid, bool add)
-{
-	struct bnx2x_vfop *vfop;
 
-	if (!bnx2x_validate_vf_sp_objs(bp, vf, true))
-		return -EINVAL;
+	/* Update the vlan counters */
+	if (filter->type == BNX2X_VF_FILTER_VLAN)
+		bnx2x_vf_vlan_credit(bp, ramrod.vlan_mac_obj,
+				     &bnx2x_vfq(vf, qid, vlan_count));
 
-	vfop  = bnx2x_vfop_add(bp, vf);
-	if (vfop) {
-		struct bnx2x_vfop_args_filters filters = {
-			.multi_filter = NULL, /* single command */
-			.credit = &bnx2x_vfq(vf, qid, vlan_count),
-		};
-		struct bnx2x_vfop_vlan_mac_flags flags = {
-			.drv_only = false,
-			.dont_consume = (filters.credit != NULL),
-			.single_cmd = true,
-			.add = add,
-		};
-		struct bnx2x_vlan_mac_ramrod_params *ramrod =
-			&vf->op_params.vlan_mac;
-
-		/* set ramrod params */
-		bnx2x_vfop_vlan_mac_prep_ramrod(ramrod, &flags);
-		ramrod->user_req.u.vlan.vlan = vid;
-
-		/* set object */
-		ramrod->vlan_mac_obj = &bnx2x_vfq(vf, qid, vlan_obj);
-
-		/* set extra args */
-		vfop->args.filters = filters;
-
-		bnx2x_vfop_opset(BNX2X_VFOP_VLAN_MAC_CONFIG_SINGLE,
-				 bnx2x_vfop_vlan_mac, cmd->done);
-		return bnx2x_vfop_transition(bp, vf, bnx2x_vfop_vlan_mac,
-					     cmd->block);
-	}
-	return -ENOMEM;
+	return 0;
 }
 
-static int bnx2x_vfop_vlan_delall_cmd(struct bnx2x *bp,
-			       struct bnx2x_virtf *vf,
-			       struct bnx2x_vfop_cmd *cmd,
-			       int qid, bool drv_only)
+int bnx2x_vf_mac_vlan_config_list(struct bnx2x *bp, struct bnx2x_virtf *vf,
+				  struct bnx2x_vf_mac_vlan_filters *filters,
+				  int qid, bool drv_only)
 {
-	struct bnx2x_vfop *vfop = bnx2x_vfop_add(bp, vf);
-
-	if (vfop) {
-		struct bnx2x_vfop_args_filters filters = {
-			.multi_filter = NULL, /* single command */
-			.credit = &bnx2x_vfq(vf, qid, vlan_count),
-		};
-		struct bnx2x_vfop_vlan_mac_flags flags = {
-			.drv_only = drv_only,
-			.dont_consume = (filters.credit != NULL),
-			.single_cmd = true,
-			.add = false, /* don't care */
-		};
-		struct bnx2x_vlan_mac_ramrod_params *ramrod =
-			&vf->op_params.vlan_mac;
-
-		/* set ramrod params */
-		bnx2x_vfop_vlan_mac_prep_ramrod(ramrod, &flags);
+	int rc = 0, i;
 
-		/* set object */
-		ramrod->vlan_mac_obj = &bnx2x_vfq(vf, qid, vlan_obj);
-
-		/* set extra args */
-		vfop->args.filters = filters;
-
-		bnx2x_vfop_opset(BNX2X_VFOP_VLAN_MAC_CLEAR,
-				 bnx2x_vfop_vlan_mac, cmd->done);
-		return bnx2x_vfop_transition(bp, vf, bnx2x_vfop_vlan_mac,
-					     cmd->block);
-	}
-	return -ENOMEM;
-}
-
-int bnx2x_vfop_vlan_list_cmd(struct bnx2x *bp,
-			     struct bnx2x_virtf *vf,
-			     struct bnx2x_vfop_cmd *cmd,
-			     struct bnx2x_vfop_filters *vlans,
-			     int qid, bool drv_only)
-{
-	struct bnx2x_vfop *vfop;
+	DP(BNX2X_MSG_IOV, "vf[%d]\n", vf->abs_vfid);
 
 	if (!bnx2x_validate_vf_sp_objs(bp, vf, true))
 		return -EINVAL;
 
-	vfop = bnx2x_vfop_add(bp, vf);
-	if (vfop) {
-		struct bnx2x_vfop_args_filters filters = {
-			.multi_filter = vlans,
-			.credit = &bnx2x_vfq(vf, qid, vlan_count),
-		};
-		struct bnx2x_vfop_vlan_mac_flags flags = {
-			.drv_only = drv_only,
-			.dont_consume = (filters.credit != NULL),
-			.single_cmd = false,
-			.add = false, /* don't care */
-		};
-		struct bnx2x_vlan_mac_ramrod_params *ramrod =
-			&vf->op_params.vlan_mac;
-
-		/* set ramrod params */
-		bnx2x_vfop_vlan_mac_prep_ramrod(ramrod, &flags);
-
-		/* set object */
-		ramrod->vlan_mac_obj = &bnx2x_vfq(vf, qid, vlan_obj);
-
-		/* set extra args */
-		filters.multi_filter->add_cnt = vf_vlan_rules_cnt(vf) -
-			atomic_read(filters.credit);
-
-		vfop->args.filters = filters;
-
-		bnx2x_vfop_opset(BNX2X_VFOP_VLAN_CONFIG_LIST,
-				 bnx2x_vfop_vlan_mac, cmd->done);
-		return bnx2x_vfop_transition(bp, vf, bnx2x_vfop_vlan_mac,
-					     cmd->block);
+	/* Prepare ramrod params */
+	for (i = 0; i < filters->count; i++) {
+		rc = bnx2x_vf_mac_vlan_config(bp, vf, qid,
+					      &filters->filters[i], drv_only);
+		if (rc)
+			break;
 	}
-	return -ENOMEM;
-}
-
-/* VFOP queue setup (queue constructor + set vlan 0) */
-static void bnx2x_vfop_qsetup(struct bnx2x *bp, struct bnx2x_virtf *vf)
-{
-	struct bnx2x_vfop *vfop = bnx2x_vfop_cur(bp, vf);
-	int qid = vfop->args.qctor.qid;
-	enum bnx2x_vfop_qsetup_state state = vfop->state;
-	struct bnx2x_vfop_cmd cmd = {
-		.done = bnx2x_vfop_qsetup,
-		.block = false,
-	};
-
-	if (vfop->rc < 0)
-		goto op_err;
-
-	DP(BNX2X_MSG_IOV, "vf[%d] STATE: %d\n", vf->abs_vfid, state);
-
-	switch (state) {
-	case BNX2X_VFOP_QSETUP_CTOR:
-		/* init the queue ctor command */
-		vfop->state = BNX2X_VFOP_QSETUP_VLAN0;
-		vfop->rc = bnx2x_vfop_qctor_cmd(bp, vf, &cmd, qid);
-		if (vfop->rc)
-			goto op_err;
-		return;
-
-	case BNX2X_VFOP_QSETUP_VLAN0:
-		/* skip if non-leading or FPGA/EMU*/
-		if (qid)
-			goto op_done;
 
-		/* init the queue set-vlan command (for vlan 0) */
-		vfop->state = BNX2X_VFOP_QSETUP_DONE;
-		vfop->rc = bnx2x_vfop_vlan_set_cmd(bp, vf, &cmd, qid, 0, true);
-		if (vfop->rc)
-			goto op_err;
-		return;
-op_err:
-	BNX2X_ERR("QSETUP[%d:%d] error: rc %d\n", vf->abs_vfid, qid, vfop->rc);
-op_done:
-	case BNX2X_VFOP_QSETUP_DONE:
-		vf->cfg_flags |= VF_CFG_VLAN;
-		bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_HYPERVISOR_VLAN,
-				       BNX2X_MSG_IOV);
-		bnx2x_vfop_end(bp, vf, vfop);
-		return;
-	default:
-		bnx2x_vfop_default(state);
+	/* Rollback if needed */
+	if (i != filters->count) {
+		BNX2X_ERR("Managed only %d/%d filters - rolling back\n",
+			  i, filters->count + 1);
+		while (--i >= 0) {
+			filters->filters[i].add = !filters->filters[i].add;
+			bnx2x_vf_mac_vlan_config(bp, vf, qid,
+						 &filters->filters[i],
+						 drv_only);
+		}
 	}
-}
-
-int bnx2x_vfop_qsetup_cmd(struct bnx2x *bp,
-			  struct bnx2x_virtf *vf,
-			  struct bnx2x_vfop_cmd *cmd,
-			  int qid)
-{
-	struct bnx2x_vfop *vfop = bnx2x_vfop_add(bp, vf);
 
-	if (vfop) {
-		vfop->args.qctor.qid = qid;
+	/* It's our responsibility to free the filters */
+	kfree(filters);
 
-		bnx2x_vfop_opset(BNX2X_VFOP_QSETUP_CTOR,
-				 bnx2x_vfop_qsetup, cmd->done);
-		return bnx2x_vfop_transition(bp, vf, bnx2x_vfop_qsetup,
-					     cmd->block);
-	}
-	return -ENOMEM;
+	return rc;
 }
 
-/* VFOP queue FLR handling (clear vlans, clear macs, queue destructor) */
-static void bnx2x_vfop_qflr(struct bnx2x *bp, struct bnx2x_virtf *vf)
+int bnx2x_vf_queue_setup(struct bnx2x *bp, struct bnx2x_virtf *vf, int qid,
+			 struct bnx2x_vf_queue_construct_params *qctor)
 {
-	struct bnx2x_vfop *vfop = bnx2x_vfop_cur(bp, vf);
-	int qid = vfop->args.qx.qid;
-	enum bnx2x_vfop_qflr_state state = vfop->state;
-	struct bnx2x_queue_state_params *qstate;
-	struct bnx2x_vfop_cmd cmd;
+	int rc;
 
-	bnx2x_vfop_reset_wq(vf);
+	DP(BNX2X_MSG_IOV, "vf[%d:%d]\n", vf->abs_vfid, qid);
 
-	if (vfop->rc < 0)
+	rc = bnx2x_vf_queue_create(bp, vf, qid, qctor);
+	if (rc)
 		goto op_err;
 
-	DP(BNX2X_MSG_IOV, "VF[%d] STATE: %d\n", vf->abs_vfid, state);
-
-	cmd.done = bnx2x_vfop_qflr;
-	cmd.block = false;
-
-	switch (state) {
-	case BNX2X_VFOP_QFLR_CLR_VLAN:
-		/* vlan-clear-all: driver-only, don't consume credit */
-		vfop->state = BNX2X_VFOP_QFLR_CLR_MAC;
-
-		/* the vlan_mac vfop will re-schedule us */
-		vfop->rc = bnx2x_vfop_vlan_delall_cmd(bp, vf, &cmd, qid, true);
-		if (vfop->rc)
-			goto op_err;
-		return;
+	/* Configure vlan0 for leading queue */
+	if (!qid) {
+		struct bnx2x_vf_mac_vlan_filter filter;
 
-	case BNX2X_VFOP_QFLR_CLR_MAC:
-		/* mac-clear-all: driver only consume credit */
-		vfop->state = BNX2X_VFOP_QFLR_TERMINATE;
-		/* the vlan_mac vfop will re-schedule us */
-		vfop->rc = bnx2x_vfop_mac_delall_cmd(bp, vf, &cmd, qid, true);
-		if (vfop->rc)
+		memset(&filter, 0, sizeof(struct bnx2x_vf_mac_vlan_filter));
+		filter.type = BNX2X_VF_FILTER_VLAN;
+		filter.add = true;
+		filter.vid = 0;
+		rc = bnx2x_vf_mac_vlan_config(bp, vf, qid, &filter, false);
+		if (rc)
 			goto op_err;
-		return;
-
-	case BNX2X_VFOP_QFLR_TERMINATE:
-		qstate = &vfop->op_p->qctor.qstate;
-		memset(qstate , 0, sizeof(*qstate));
-		qstate->q_obj = &bnx2x_vfq(vf, qid, sp_obj);
-		vfop->state = BNX2X_VFOP_QFLR_DONE;
-
-		DP(BNX2X_MSG_IOV, "VF[%d] qstate during flr was %d\n",
-		   vf->abs_vfid, qstate->q_obj->state);
-
-		if (qstate->q_obj->state != BNX2X_Q_STATE_RESET) {
-			qstate->q_obj->state = BNX2X_Q_STATE_STOPPED;
-			qstate->cmd = BNX2X_Q_CMD_TERMINATE;
-			vfop->rc = bnx2x_queue_state_change(bp, qstate);
-			bnx2x_vfop_finalize(vf, vfop->rc, VFOP_VERIFY_PEND);
-		} else {
-			goto op_done;
-		}
+	}
 
+	/* Schedule the configuration of any pending vlan filters */
+	vf->cfg_flags |= VF_CFG_VLAN;
+	bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_HYPERVISOR_VLAN,
+			       BNX2X_MSG_IOV);
+	return 0;
 op_err:
-	BNX2X_ERR("QFLR[%d:%d] error: rc %d\n",
-		  vf->abs_vfid, qid, vfop->rc);
-op_done:
-	case BNX2X_VFOP_QFLR_DONE:
-		bnx2x_vfop_end(bp, vf, vfop);
-		return;
-	default:
-		bnx2x_vfop_default(state);
-	}
-op_pending:
-	return;
+	BNX2X_ERR("QSETUP[%d:%d] error: rc %d\n", vf->abs_vfid, qid, rc);
+	return rc;
 }
 
-static int bnx2x_vfop_qflr_cmd(struct bnx2x *bp,
-			       struct bnx2x_virtf *vf,
-			       struct bnx2x_vfop_cmd *cmd,
+static int bnx2x_vf_queue_flr(struct bnx2x *bp, struct bnx2x_virtf *vf,
 			       int qid)
 {
-	struct bnx2x_vfop *vfop = bnx2x_vfop_add(bp, vf);
-
-	if (vfop) {
-		vfop->args.qx.qid = qid;
-		if ((qid == LEADING_IDX) &&
-		    bnx2x_validate_vf_sp_objs(bp, vf, false))
-			bnx2x_vfop_opset(BNX2X_VFOP_QFLR_CLR_VLAN,
-					 bnx2x_vfop_qflr, cmd->done);
-		else
-			bnx2x_vfop_opset(BNX2X_VFOP_QFLR_TERMINATE,
-					 bnx2x_vfop_qflr, cmd->done);
-		return bnx2x_vfop_transition(bp, vf, bnx2x_vfop_qflr,
-					     cmd->block);
-	}
-	return -ENOMEM;
-}
-
-/* VFOP multi-casts */
-static void bnx2x_vfop_mcast(struct bnx2x *bp, struct bnx2x_virtf *vf)
-{
-	struct bnx2x_vfop *vfop = bnx2x_vfop_cur(bp, vf);
-	struct bnx2x_mcast_ramrod_params *mcast = &vfop->op_p->mcast;
-	struct bnx2x_raw_obj *raw = &mcast->mcast_obj->raw;
-	struct bnx2x_vfop_args_mcast *args = &vfop->args.mc_list;
-	enum bnx2x_vfop_mcast_state state = vfop->state;
-	int i;
+	int rc;
 
-	bnx2x_vfop_reset_wq(vf);
+	DP(BNX2X_MSG_IOV, "vf[%d:%d]\n", vf->abs_vfid, qid);
 
-	if (vfop->rc < 0)
-		goto op_err;
+	/* If needed, clean the filtering data base */
+	if ((qid == LEADING_IDX) &&
+	    bnx2x_validate_vf_sp_objs(bp, vf, false)) {
+		rc = bnx2x_vf_vlan_mac_clear(bp, vf, qid, true, false);
+		if (rc)
+			goto op_err;
+		rc = bnx2x_vf_vlan_mac_clear(bp, vf, qid, true, true);
+		if (rc)
+			goto op_err;
+	}
 
-	DP(BNX2X_MSG_IOV, "vf[%d] STATE: %d\n", vf->abs_vfid, state);
-
-	switch (state) {
-	case BNX2X_VFOP_MCAST_DEL:
-		/* clear existing mcasts */
-		vfop->state = (args->mc_num) ? BNX2X_VFOP_MCAST_ADD
-					     : BNX2X_VFOP_MCAST_CHK_DONE;
-		mcast->mcast_list_len = vf->mcast_list_len;
-		vf->mcast_list_len = args->mc_num;
-		vfop->rc = bnx2x_config_mcast(bp, mcast, BNX2X_MCAST_CMD_DEL);
-		bnx2x_vfop_finalize(vf, vfop->rc, VFOP_CONT);
-
-	case BNX2X_VFOP_MCAST_ADD:
-		if (raw->check_pending(raw))
-			goto op_pending;
-
-		/* update mcast list on the ramrod params */
-		INIT_LIST_HEAD(&mcast->mcast_list);
-		for (i = 0; i < args->mc_num; i++)
-			list_add_tail(&(args->mc[i].link),
-				      &mcast->mcast_list);
-		mcast->mcast_list_len = args->mc_num;
+	/* Terminate queue */
+	if (bnx2x_vfq(vf, qid, sp_obj).state != BNX2X_Q_STATE_RESET) {
+		struct bnx2x_queue_state_params qstate;
 
-		/* add new mcasts */
-		vfop->state = BNX2X_VFOP_MCAST_CHK_DONE;
-		vfop->rc = bnx2x_config_mcast(bp, mcast,
-					      BNX2X_MCAST_CMD_ADD);
-		bnx2x_vfop_finalize(vf, vfop->rc, VFOP_DONE);
-
-	case BNX2X_VFOP_MCAST_CHK_DONE:
-		vfop->rc = raw->check_pending(raw) ? 1 : 0;
-		bnx2x_vfop_finalize(vf, vfop->rc, VFOP_DONE);
-	default:
-		bnx2x_vfop_default(state);
+		memset(&qstate, 0, sizeof(struct bnx2x_queue_state_params));
+		qstate.q_obj = &bnx2x_vfq(vf, qid, sp_obj);
+		qstate.q_obj->state = BNX2X_Q_STATE_STOPPED;
+		qstate.cmd = BNX2X_Q_CMD_TERMINATE;
+		set_bit(RAMROD_COMP_WAIT, &qstate.ramrod_flags);
+		rc = bnx2x_queue_state_change(bp, &qstate);
+		if (rc)
+			goto op_err;
 	}
-op_err:
-	BNX2X_ERR("MCAST CONFIG error: rc %d\n", vfop->rc);
-op_done:
-	kfree(args->mc);
-	bnx2x_vfop_end(bp, vf, vfop);
-op_pending:
-	return;
-}
 
-int bnx2x_vfop_mcast_cmd(struct bnx2x *bp,
-			 struct bnx2x_virtf *vf,
-			 struct bnx2x_vfop_cmd *cmd,
-			 bnx2x_mac_addr_t *mcasts,
-			 int mcast_num, bool drv_only)
-{
-	struct bnx2x_vfop *vfop = NULL;
-	size_t mc_sz = mcast_num * sizeof(struct bnx2x_mcast_list_elem);
-	struct bnx2x_mcast_list_elem *mc = mc_sz ? kzalloc(mc_sz, GFP_KERNEL) :
-					   NULL;
-
-	if (!mc_sz || mc) {
-		vfop = bnx2x_vfop_add(bp, vf);
-		if (vfop) {
-			int i;
-			struct bnx2x_mcast_ramrod_params *ramrod =
-				&vf->op_params.mcast;
-
-			/* set ramrod params */
-			memset(ramrod, 0, sizeof(*ramrod));
-			ramrod->mcast_obj = &vf->mcast_obj;
-			if (drv_only)
-				set_bit(RAMROD_DRV_CLR_ONLY,
-					&ramrod->ramrod_flags);
-
-			/* copy mcasts pointers */
-			vfop->args.mc_list.mc_num = mcast_num;
-			vfop->args.mc_list.mc = mc;
-			for (i = 0; i < mcast_num; i++)
-				mc[i].mac = mcasts[i];
-
-			bnx2x_vfop_opset(BNX2X_VFOP_MCAST_DEL,
-					 bnx2x_vfop_mcast, cmd->done);
-			return bnx2x_vfop_transition(bp, vf, bnx2x_vfop_mcast,
-						     cmd->block);
-		} else {
-			kfree(mc);
-		}
-	}
-	return -ENOMEM;
+	return 0;
+op_err:
+	BNX2X_ERR("vf[%d:%d] error: rc %d\n", vf->abs_vfid, qid, rc);
+	return rc;
 }
 
-/* VFOP rx-mode */
-static void bnx2x_vfop_rxmode(struct bnx2x *bp, struct bnx2x_virtf *vf)
+int bnx2x_vf_mcast(struct bnx2x *bp, struct bnx2x_virtf *vf,
+		   bnx2x_mac_addr_t *mcasts, int mc_num, bool drv_only)
 {
-	struct bnx2x_vfop *vfop = bnx2x_vfop_cur(bp, vf);
-	struct bnx2x_rx_mode_ramrod_params *ramrod = &vfop->op_p->rx_mode;
-	enum bnx2x_vfop_rxmode_state state = vfop->state;
+	struct bnx2x_mcast_list_elem *mc = NULL;
+	struct bnx2x_mcast_ramrod_params mcast;
+	int rc, i;
 
-	bnx2x_vfop_reset_wq(vf);
+	DP(BNX2X_MSG_IOV, "vf[%d]\n", vf->abs_vfid);
 
-	if (vfop->rc < 0)
-		goto op_err;
+	/* Prepare Multicast command */
+	memset(&mcast, 0, sizeof(struct bnx2x_mcast_ramrod_params));
+	mcast.mcast_obj = &vf->mcast_obj;
+	if (drv_only)
+		set_bit(RAMROD_DRV_CLR_ONLY, &mcast.ramrod_flags);
+	else
+		set_bit(RAMROD_COMP_WAIT, &mcast.ramrod_flags);
+	if (mc_num) {
+		mc = kzalloc(mc_num * sizeof(struct bnx2x_mcast_list_elem),
+			     GFP_KERNEL);
+		if (!mc) {
+			BNX2X_ERR("Cannot Configure mulicasts due to lack of memory\n");
+			return -ENOMEM;
+		}
+	}
 
-	DP(BNX2X_MSG_IOV, "vf[%d] STATE: %d\n", vf->abs_vfid, state);
+	/* clear existing mcasts */
+	mcast.mcast_list_len = vf->mcast_list_len;
+	vf->mcast_list_len = mc_num;
+	rc = bnx2x_config_mcast(bp, &mcast, BNX2X_MCAST_CMD_DEL);
+	if (rc) {
+		BNX2X_ERR("Failed to remove multicasts\n");
+		return rc;
+	}
 
-	switch (state) {
-	case BNX2X_VFOP_RXMODE_CONFIG:
-		/* next state */
-		vfop->state = BNX2X_VFOP_RXMODE_DONE;
+	/* update mcast list on the ramrod params */
+	if (mc_num) {
+		INIT_LIST_HEAD(&mcast.mcast_list);
+		for (i = 0; i < mc_num; i++) {
+			mc[i].mac = mcasts[i];
+			list_add_tail(&mc[i].link,
+				      &mcast.mcast_list);
+		}
 
-		/* record the accept flags in vfdb so hypervisor can modify them
-		 * if necessary
-		 */
-		bnx2x_vfq(vf, ramrod->cl_id - vf->igu_base_id, accept_flags) =
-			ramrod->rx_accept_flags;
-		vfop->rc = bnx2x_config_rx_mode(bp, ramrod);
-		bnx2x_vfop_finalize(vf, vfop->rc, VFOP_DONE);
-op_err:
-		BNX2X_ERR("RXMODE error: rc %d\n", vfop->rc);
-op_done:
-	case BNX2X_VFOP_RXMODE_DONE:
-		bnx2x_vfop_end(bp, vf, vfop);
-		return;
-	default:
-		bnx2x_vfop_default(state);
+		/* add new mcasts */
+		rc = bnx2x_config_mcast(bp, &mcast, BNX2X_MCAST_CMD_ADD);
+		if (rc)
+			BNX2X_ERR("Faled to add multicasts\n");
+		kfree(mc);
 	}
-op_pending:
-	return;
+
+	return rc;
 }
 
 static void bnx2x_vf_prep_rx_mode(struct bnx2x *bp, u8 qid,
@@ -1268,121 +642,56 @@ static void bnx2x_vf_prep_rx_mode(struct bnx2x *bp, u8 qid,
 	ramrod->rdata_mapping = bnx2x_vf_sp_map(bp, vf, rx_mode_rdata.e2);
 }
 
-int bnx2x_vfop_rxmode_cmd(struct bnx2x *bp,
-			  struct bnx2x_virtf *vf,
-			  struct bnx2x_vfop_cmd *cmd,
-			  int qid, unsigned long accept_flags)
+int bnx2x_vf_rxmode(struct bnx2x *bp, struct bnx2x_virtf *vf,
+		    int qid, unsigned long accept_flags)
 {
-	struct bnx2x_vfop *vfop = bnx2x_vfop_add(bp, vf);
-
-	if (vfop) {
-		struct bnx2x_rx_mode_ramrod_params *ramrod =
-			&vf->op_params.rx_mode;
+	struct bnx2x_rx_mode_ramrod_params ramrod;
 
-		bnx2x_vf_prep_rx_mode(bp, qid, ramrod, vf, accept_flags);
+	DP(BNX2X_MSG_IOV, "vf[%d]\n", vf->abs_vfid);
 
-		bnx2x_vfop_opset(BNX2X_VFOP_RXMODE_CONFIG,
-				 bnx2x_vfop_rxmode, cmd->done);
-		return bnx2x_vfop_transition(bp, vf, bnx2x_vfop_rxmode,
-					     cmd->block);
-	}
-	return -ENOMEM;
+	bnx2x_vf_prep_rx_mode(bp, qid, &ramrod, vf, accept_flags);
+	set_bit(RAMROD_COMP_WAIT, &ramrod.ramrod_flags);
+	vfq_get(vf, qid)->accept_flags = ramrod.rx_accept_flags;
+	return bnx2x_config_rx_mode(bp, &ramrod);
 }
 
-/* VFOP queue tear-down ('drop all' rx-mode, clear vlans, clear macs,
- * queue destructor)
- */
-static void bnx2x_vfop_qdown(struct bnx2x *bp, struct bnx2x_virtf *vf)
+int bnx2x_vf_queue_teardown(struct bnx2x *bp, struct bnx2x_virtf *vf, int qid)
 {
-	struct bnx2x_vfop *vfop = bnx2x_vfop_cur(bp, vf);
-	int qid = vfop->args.qx.qid;
-	enum bnx2x_vfop_qteardown_state state = vfop->state;
-	struct bnx2x_vfop_cmd cmd;
-
-	if (vfop->rc < 0)
-		goto op_err;
-
-	DP(BNX2X_MSG_IOV, "vf[%d] STATE: %d\n", vf->abs_vfid, state);
-
-	cmd.done = bnx2x_vfop_qdown;
-	cmd.block = false;
-
-	switch (state) {
-	case BNX2X_VFOP_QTEARDOWN_RXMODE:
-		/* Drop all */
-		if (bnx2x_validate_vf_sp_objs(bp, vf, true))
-			vfop->state =  BNX2X_VFOP_QTEARDOWN_CLR_VLAN;
-		else
-			vfop->state = BNX2X_VFOP_QTEARDOWN_QDTOR;
-		vfop->rc = bnx2x_vfop_rxmode_cmd(bp, vf, &cmd, qid, 0);
-		if (vfop->rc)
-			goto op_err;
-		return;
-
-	case BNX2X_VFOP_QTEARDOWN_CLR_VLAN:
-		/* vlan-clear-all: don't consume credit */
-		vfop->state = BNX2X_VFOP_QTEARDOWN_CLR_MAC;
-		vfop->rc = bnx2x_vfop_vlan_delall_cmd(bp, vf, &cmd, qid, false);
-		if (vfop->rc)
-			goto op_err;
-		return;
-
-	case BNX2X_VFOP_QTEARDOWN_CLR_MAC:
-		/* mac-clear-all: consume credit */
-		vfop->state = BNX2X_VFOP_QTEARDOWN_CLR_MCAST;
-		vfop->rc = bnx2x_vfop_mac_delall_cmd(bp, vf, &cmd, qid, false);
-		if (vfop->rc)
-			goto op_err;
-		return;
+	int rc;
 
-	case BNX2X_VFOP_QTEARDOWN_CLR_MCAST:
-		vfop->state = BNX2X_VFOP_QTEARDOWN_QDTOR;
-		vfop->rc = bnx2x_vfop_mcast_cmd(bp, vf, &cmd, NULL, 0, false);
-		if (vfop->rc)
-			goto op_err;
-		return;
+	DP(BNX2X_MSG_IOV, "vf[%d:%d]\n", vf->abs_vfid, qid);
 
-	case BNX2X_VFOP_QTEARDOWN_QDTOR:
-		/* run the queue destruction flow */
-		DP(BNX2X_MSG_IOV, "case: BNX2X_VFOP_QTEARDOWN_QDTOR\n");
-		vfop->state = BNX2X_VFOP_QTEARDOWN_DONE;
-		DP(BNX2X_MSG_IOV, "new state: BNX2X_VFOP_QTEARDOWN_DONE\n");
-		vfop->rc = bnx2x_vfop_qdtor_cmd(bp, vf, &cmd, qid);
-		DP(BNX2X_MSG_IOV, "returned from cmd\n");
-		if (vfop->rc)
+	/* Remove all classification configuration for leading queue */
+	if (qid == LEADING_IDX) {
+		rc = bnx2x_vf_rxmode(bp, vf, qid, 0);
+		if (rc)
 			goto op_err;
-		return;
-op_err:
-	BNX2X_ERR("QTEARDOWN[%d:%d] error: rc %d\n",
-		  vf->abs_vfid, qid, vfop->rc);
 
-	case BNX2X_VFOP_QTEARDOWN_DONE:
-		bnx2x_vfop_end(bp, vf, vfop);
-		return;
-	default:
-		bnx2x_vfop_default(state);
-	}
-}
-
-int bnx2x_vfop_qdown_cmd(struct bnx2x *bp,
-			 struct bnx2x_virtf *vf,
-			 struct bnx2x_vfop_cmd *cmd,
-			 int qid)
-{
-	struct bnx2x_vfop *vfop = bnx2x_vfop_add(bp, vf);
-
-	/* for non leading queues skip directly to qdown sate */
-	if (vfop) {
-		vfop->args.qx.qid = qid;
-		bnx2x_vfop_opset(qid == LEADING_IDX ?
-				 BNX2X_VFOP_QTEARDOWN_RXMODE :
-				 BNX2X_VFOP_QTEARDOWN_QDTOR, bnx2x_vfop_qdown,
-				 cmd->done);
-		return bnx2x_vfop_transition(bp, vf, bnx2x_vfop_qdown,
-					     cmd->block);
+		/* Remove filtering if feasible */
+		if (bnx2x_validate_vf_sp_objs(bp, vf, true)) {
+			rc = bnx2x_vf_vlan_mac_clear(bp, vf, qid,
+						     false, false);
+			if (rc)
+				goto op_err;
+			rc = bnx2x_vf_vlan_mac_clear(bp, vf, qid,
+						     false, true);
+			if (rc)
+				goto op_err;
+			rc = bnx2x_vf_mcast(bp, vf, NULL, 0, false);
+			if (rc)
+				goto op_err;
+		}
 	}
 
-	return -ENOMEM;
+	/* Destroy queue */
+	rc = bnx2x_vf_queue_destroy(bp, vf, qid);
+	if (rc)
+		goto op_err;
+	return rc;
+op_err:
+	BNX2X_ERR("vf[%d:%d] error: rc %d\n",
+		  vf->abs_vfid, qid, rc);
+	return rc;
 }
 
 /* VF enable primitives
@@ -1582,120 +891,63 @@ static void bnx2x_vf_flr_clnup_hw(struct bnx2x *bp, struct bnx2x_virtf *vf)
 	bnx2x_tx_hw_flushed(bp, poll_cnt);
 }
 
-static void bnx2x_vfop_flr(struct bnx2x *bp, struct bnx2x_virtf *vf)
+static void bnx2x_vf_flr(struct bnx2x *bp, struct bnx2x_virtf *vf)
 {
-	struct bnx2x_vfop *vfop = bnx2x_vfop_cur(bp, vf);
-	struct bnx2x_vfop_args_qx *qx = &vfop->args.qx;
-	enum bnx2x_vfop_flr_state state = vfop->state;
-	struct bnx2x_vfop_cmd cmd = {
-		.done = bnx2x_vfop_flr,
-		.block = false,
-	};
-
-	if (vfop->rc < 0)
-		goto op_err;
+	int rc, i;
 
-	DP(BNX2X_MSG_IOV, "vf[%d] STATE: %d\n", vf->abs_vfid, state);
+	DP(BNX2X_MSG_IOV, "vf[%d]\n", vf->abs_vfid);
 
-	switch (state) {
-	case BNX2X_VFOP_FLR_QUEUES:
-		/* the cleanup operations are valid if and only if the VF
-		 * was first acquired.
-		 */
-		if (++(qx->qid) < vf_rxq_count(vf)) {
-			vfop->rc = bnx2x_vfop_qflr_cmd(bp, vf, &cmd,
-						       qx->qid);
-			if (vfop->rc)
-				goto op_err;
-			return;
-		}
-		/* remove multicasts */
-		vfop->state = BNX2X_VFOP_FLR_HW;
-		vfop->rc = bnx2x_vfop_mcast_cmd(bp, vf, &cmd, NULL,
-						0, true);
-		if (vfop->rc)
-			goto op_err;
-		return;
-	case BNX2X_VFOP_FLR_HW:
+	/* the cleanup operations are valid if and only if the VF
+	 * was first acquired.
+	 */
+	for (i = 0; i < vf_rxq_count(vf); i++) {
+		rc = bnx2x_vf_queue_flr(bp, vf, i);
+		if (rc)
+			goto out;
+	}
 
-		/* dispatch final cleanup and wait for HW queues to flush */
-		bnx2x_vf_flr_clnup_hw(bp, vf);
+	/* remove multicasts */
+	bnx2x_vf_mcast(bp, vf, NULL, 0, true);
 
-		/* release VF resources */
-		bnx2x_vf_free_resc(bp, vf);
+	/* dispatch final cleanup and wait for HW queues to flush */
+	bnx2x_vf_flr_clnup_hw(bp, vf);
 
-		/* re-open the mailbox */
-		bnx2x_vf_enable_mbx(bp, vf->abs_vfid);
+	/* release VF resources */
+	bnx2x_vf_free_resc(bp, vf);
 
-		goto op_done;
-	default:
-		bnx2x_vfop_default(state);
-	}
-op_err:
-	BNX2X_ERR("VF[%d] FLR error: rc %d\n", vf->abs_vfid, vfop->rc);
-op_done:
-	vf->flr_clnup_stage = VF_FLR_ACK;
-	bnx2x_vfop_end(bp, vf, vfop);
-	bnx2x_unlock_vf_pf_channel(bp, vf, CHANNEL_TLV_FLR);
-}
-
-static int bnx2x_vfop_flr_cmd(struct bnx2x *bp,
-			      struct bnx2x_virtf *vf,
-			      vfop_handler_t done)
-{
-	struct bnx2x_vfop *vfop = bnx2x_vfop_add(bp, vf);
-	if (vfop) {
-		vfop->args.qx.qid = -1; /* loop */
-		bnx2x_vfop_opset(BNX2X_VFOP_FLR_QUEUES,
-				 bnx2x_vfop_flr, done);
-		return bnx2x_vfop_transition(bp, vf, bnx2x_vfop_flr, false);
-	}
-	return -ENOMEM;
+	/* re-open the mailbox */
+	bnx2x_vf_enable_mbx(bp, vf->abs_vfid);
+	return;
+out:
+	BNX2X_ERR("vf[%d:%d] failed flr: rc %d\n",
+		  vf->abs_vfid, i, rc);
 }
 
-static void bnx2x_vf_flr_clnup(struct bnx2x *bp, struct bnx2x_virtf *prev_vf)
+static void bnx2x_vf_flr_clnup(struct bnx2x *bp)
 {
-	int i = prev_vf ? prev_vf->index + 1 : 0;
 	struct bnx2x_virtf *vf;
+	int i;
 
-	/* find next VF to cleanup */
-next_vf_to_clean:
-	for (;
-	     i < BNX2X_NR_VIRTFN(bp) &&
-	     (bnx2x_vf(bp, i, state) != VF_RESET ||
-	      bnx2x_vf(bp, i, flr_clnup_stage) != VF_FLR_CLN);
-	     i++)
-		;
+	for (i = 0; i < BNX2X_NR_VIRTFN(bp); i++) {
+		/* VF should be RESET & in FLR cleanup states */
+		if (bnx2x_vf(bp, i, state) != VF_RESET ||
+		    !bnx2x_vf(bp, i, flr_clnup_stage))
+			continue;
 
-	DP(BNX2X_MSG_IOV, "next vf to cleanup: %d. Num of vfs: %d\n", i,
-	   BNX2X_NR_VIRTFN(bp));
+		DP(BNX2X_MSG_IOV, "next vf to cleanup: %d. Num of vfs: %d\n",
+		   i, BNX2X_NR_VIRTFN(bp));
 
-	if (i < BNX2X_NR_VIRTFN(bp)) {
 		vf = BP_VF(bp, i);
 
 		/* lock the vf pf channel */
 		bnx2x_lock_vf_pf_channel(bp, vf, CHANNEL_TLV_FLR);
 
 		/* invoke the VF FLR SM */
-		if (bnx2x_vfop_flr_cmd(bp, vf, bnx2x_vf_flr_clnup)) {
-			BNX2X_ERR("VF[%d]: FLR cleanup failed -ENOMEM\n",
-				  vf->abs_vfid);
+		bnx2x_vf_flr(bp, vf);
 
-			/* mark the VF to be ACKED and continue */
-			vf->flr_clnup_stage = VF_FLR_ACK;
-			goto next_vf_to_clean;
-		}
-		return;
-	}
-
-	/* we are done, update vf records */
-	for_each_vf(bp, i) {
-		vf = BP_VF(bp, i);
-
-		if (vf->flr_clnup_stage != VF_FLR_ACK)
-			continue;
-
-		vf->flr_clnup_stage = VF_FLR_EPILOG;
+		/* mark the VF to be ACKED and continue */
+		vf->flr_clnup_stage = false;
+		bnx2x_unlock_vf_pf_channel(bp, vf, CHANNEL_TLV_FLR);
 	}
 
 	/* Acknowledge the handled VFs.
@@ -1745,7 +997,7 @@ void bnx2x_vf_handle_flr_event(struct bnx2x *bp)
 		if (reset) {
 			/* set as reset and ready for cleanup */
 			vf->state = VF_RESET;
-			vf->flr_clnup_stage = VF_FLR_CLN;
+			vf->flr_clnup_stage = true;
 
 			DP(BNX2X_MSG_IOV,
 			   "Initiating Final cleanup for VF %d\n",
@@ -1754,7 +1006,7 @@ void bnx2x_vf_handle_flr_event(struct bnx2x *bp)
 	}
 
 	/* do the FLR cleanup for all marked VFs*/
-	bnx2x_vf_flr_clnup(bp, NULL);
+	bnx2x_vf_flr_clnup(bp);
 }
 
 /* IOV global initialization routines  */
@@ -2021,7 +1273,6 @@ int bnx2x_iov_init_one(struct bnx2x *bp, int int_mode_param,
 		bnx2x_vf(bp, i, index) = i;
 		bnx2x_vf(bp, i, abs_vfid) = iov->first_vf_in_pf + i;
 		bnx2x_vf(bp, i, state) = VF_FREE;
-		INIT_LIST_HEAD(&bnx2x_vf(bp, i, op_list_head));
 		mutex_init(&bnx2x_vf(bp, i, op_mutex));
 		bnx2x_vf(bp, i, op_current) = CHANNEL_TLV_NONE;
 	}
@@ -2288,7 +1539,7 @@ int bnx2x_iov_chip_cleanup(struct bnx2x *bp)
 
 	/* release all the VFs */
 	for_each_vf(bp, i)
-		bnx2x_vf_release(bp, BP_VF(bp, i), true); /* blocking */
+		bnx2x_vf_release(bp, BP_VF(bp, i));
 
 	return 0;
 }
@@ -2378,6 +1629,12 @@ void bnx2x_vf_handle_filters_eqe(struct bnx2x *bp,
 	smp_mb__after_clear_bit();
 }
 
+static void bnx2x_vf_handle_rss_update_eqe(struct bnx2x *bp,
+					   struct bnx2x_virtf *vf)
+{
+	vf->rss_conf_obj.raw.clear_pending(&vf->rss_conf_obj.raw);
+}
+
 int bnx2x_iov_eq_sp_event(struct bnx2x *bp, union event_ring_elem *elem)
 {
 	struct bnx2x_virtf *vf;
@@ -2402,6 +1659,7 @@ int bnx2x_iov_eq_sp_event(struct bnx2x *bp, union event_ring_elem *elem)
 	case EVENT_RING_OPCODE_CLASSIFICATION_RULES:
 	case EVENT_RING_OPCODE_MULTICAST_RULES:
 	case EVENT_RING_OPCODE_FILTERS_RULES:
+	case EVENT_RING_OPCODE_RSS_UPDATE_RULES:
 		cid = (elem->message.data.eth_event.echo &
 		       BNX2X_SWCID_MASK);
 		DP(BNX2X_MSG_IOV, "checking filtering comp cid=%d\n", cid);
@@ -2466,13 +1724,15 @@ get_vf:
 		   vf->abs_vfid, qidx);
 		bnx2x_vf_handle_filters_eqe(bp, vf);
 		break;
+	case EVENT_RING_OPCODE_RSS_UPDATE_RULES:
+		DP(BNX2X_MSG_IOV, "got VF [%d:%d] RSS update ramrod\n",
+		   vf->abs_vfid, qidx);
+		bnx2x_vf_handle_rss_update_eqe(bp, vf);
 	case EVENT_RING_OPCODE_VF_FLR:
 	case EVENT_RING_OPCODE_MALICIOUS_VF:
 		/* Do nothing for now */
 		return 0;
 	}
-	/* SRIOV: reschedule any 'in_progress' operations */
-	bnx2x_iov_sp_event(bp, cid);
 
 	return 0;
 }
@@ -2509,22 +1769,6 @@ void bnx2x_iov_set_queue_sp_obj(struct bnx2x *bp, int vf_cid,
 	}
 }
 
-void bnx2x_iov_sp_event(struct bnx2x *bp, int vf_cid)
-{
-	struct bnx2x_virtf *vf;
-
-	/* check if the cid is the VF range */
-	if (!IS_SRIOV(bp) || !bnx2x_iov_is_vf_cid(bp, vf_cid))
-		return;
-
-	vf = bnx2x_vf_by_cid(bp, vf_cid);
-	if (vf) {
-		/* set in_progress flag */
-		atomic_set(&vf->op_in_progress, 1);
-		bnx2x_schedule_iov_task(bp, BNX2X_IOV_CONT_VFOP);
-	}
-}
-
 void bnx2x_iov_adjust_stats_req(struct bnx2x *bp)
 {
 	int i;
@@ -2606,33 +1850,6 @@ void bnx2x_iov_adjust_stats_req(struct bnx2x *bp)
 	bp->fw_stats_req->hdr.cmd_num = bp->fw_stats_num + stats_count;
 }
 
-void bnx2x_iov_vfop_cont(struct bnx2x *bp)
-{
-	int i;
-
-	if (!IS_SRIOV(bp))
-		return;
-	/* Iterate over all VFs and invoke state transition for VFs with
-	 * 'in-progress' slow-path operations
-	 */
-	DP_AND((BNX2X_MSG_IOV | BNX2X_MSG_SP),
-	       "searching for pending vf operations\n");
-	for_each_vf(bp, i) {
-		struct bnx2x_virtf *vf = BP_VF(bp, i);
-
-		if (!vf) {
-			BNX2X_ERR("VF was null! skipping...\n");
-			continue;
-		}
-
-		if (!list_empty(&vf->op_list_head) &&
-		    atomic_read(&vf->op_in_progress)) {
-			DP(BNX2X_MSG_IOV, "running pending op for vf %d\n", i);
-			bnx2x_vfop_cur(bp, vf)->transition(bp, vf);
-		}
-	}
-}
-
 static inline
 struct bnx2x_virtf *__vf_from_stat_id(struct bnx2x *bp, u8 stat_id)
 {
@@ -2868,52 +2085,26 @@ static void bnx2x_set_vf_state(void *cookie)
 	p->vf->state = p->state;
 }
 
-/* VFOP close (teardown the queues, delete mcasts and close HW) */
-static void bnx2x_vfop_close(struct bnx2x *bp, struct bnx2x_virtf *vf)
+int bnx2x_vf_close(struct bnx2x *bp, struct bnx2x_virtf *vf)
 {
-	struct bnx2x_vfop *vfop = bnx2x_vfop_cur(bp, vf);
-	struct bnx2x_vfop_args_qx *qx = &vfop->args.qx;
-	enum bnx2x_vfop_close_state state = vfop->state;
-	struct bnx2x_vfop_cmd cmd = {
-		.done = bnx2x_vfop_close,
-		.block = false,
-	};
-
-	if (vfop->rc < 0)
-		goto op_err;
-
-	DP(BNX2X_MSG_IOV, "vf[%d] STATE: %d\n", vf->abs_vfid, state);
+	int rc = 0, i;
 
-	switch (state) {
-	case BNX2X_VFOP_CLOSE_QUEUES:
-
-		if (++(qx->qid) < vf_rxq_count(vf)) {
-			vfop->rc = bnx2x_vfop_qdown_cmd(bp, vf, &cmd, qx->qid);
-			if (vfop->rc)
-				goto op_err;
-			return;
-		}
-		vfop->state = BNX2X_VFOP_CLOSE_HW;
-		vfop->rc = 0;
-		bnx2x_vfop_finalize(vf, vfop->rc, VFOP_CONT);
+	DP(BNX2X_MSG_IOV, "vf[%d]\n", vf->abs_vfid);
 
-	case BNX2X_VFOP_CLOSE_HW:
+	/* Close all queues */
+	for (i = 0; i < vf_rxq_count(vf); i++) {
+		rc = bnx2x_vf_queue_teardown(bp, vf, i);
+		if (rc)
+			goto op_err;
+	}
 
-		/* disable the interrupts */
-		DP(BNX2X_MSG_IOV, "disabling igu\n");
-		bnx2x_vf_igu_disable(bp, vf);
+	/* disable the interrupts */
+	DP(BNX2X_MSG_IOV, "disabling igu\n");
+	bnx2x_vf_igu_disable(bp, vf);
 
-		/* disable the VF */
-		DP(BNX2X_MSG_IOV, "clearing qtbl\n");
-		bnx2x_vf_clr_qtbl(bp, vf);
-
-		goto op_done;
-	default:
-		bnx2x_vfop_default(state);
-	}
-op_err:
-	BNX2X_ERR("VF[%d] CLOSE error: rc %d\n", vf->abs_vfid, vfop->rc);
-op_done:
+	/* disable the VF */
+	DP(BNX2X_MSG_IOV, "clearing qtbl\n");
+	bnx2x_vf_clr_qtbl(bp, vf);
 
 	/* need to make sure there are no outstanding stats ramrods which may
 	 * cause the device to access the VF's stats buffer which it will free
@@ -2928,43 +2119,20 @@ op_done:
 	}
 
 	DP(BNX2X_MSG_IOV, "set state to acquired\n");
-	bnx2x_vfop_end(bp, vf, vfop);
-op_pending:
-	/* Not supported at the moment; Exists for macros only */
-	return;
-}
 
-int bnx2x_vfop_close_cmd(struct bnx2x *bp,
-			 struct bnx2x_virtf *vf,
-			 struct bnx2x_vfop_cmd *cmd)
-{
-	struct bnx2x_vfop *vfop = bnx2x_vfop_add(bp, vf);
-	if (vfop) {
-		vfop->args.qx.qid = -1; /* loop */
-		bnx2x_vfop_opset(BNX2X_VFOP_CLOSE_QUEUES,
-				 bnx2x_vfop_close, cmd->done);
-		return bnx2x_vfop_transition(bp, vf, bnx2x_vfop_close,
-					     cmd->block);
-	}
-	return -ENOMEM;
+	return 0;
+op_err:
+	BNX2X_ERR("vf[%d] CLOSE error: rc %d\n", vf->abs_vfid, rc);
+	return rc;
 }
 
 /* VF release can be called either: 1. The VF was acquired but
  * not enabled 2. the vf was enabled or in the process of being
  * enabled
  */
-static void bnx2x_vfop_release(struct bnx2x *bp, struct bnx2x_virtf *vf)
+int bnx2x_vf_free(struct bnx2x *bp, struct bnx2x_virtf *vf)
 {
-	struct bnx2x_vfop *vfop = bnx2x_vfop_cur(bp, vf);
-	struct bnx2x_vfop_cmd cmd = {
-		.done = bnx2x_vfop_release,
-		.block = false,
-	};
-
-	DP(BNX2X_MSG_IOV, "vfop->rc %d\n", vfop->rc);
-
-	if (vfop->rc < 0)
-		goto op_err;
+	int rc;
 
 	DP(BNX2X_MSG_IOV, "VF[%d] STATE: %s\n", vf->abs_vfid,
 	   vf->state == VF_FREE ? "Free" :
@@ -2975,193 +2143,87 @@ static void bnx2x_vfop_release(struct bnx2x *bp, struct bnx2x_virtf *vf)
 
 	switch (vf->state) {
 	case VF_ENABLED:
-		vfop->rc = bnx2x_vfop_close_cmd(bp, vf, &cmd);
-		if (vfop->rc)
+		rc = bnx2x_vf_close(bp, vf);
+		if (rc)
 			goto op_err;
-		return;
-
+		/* Fallthrough to release resources */
 	case VF_ACQUIRED:
 		DP(BNX2X_MSG_IOV, "about to free resources\n");
 		bnx2x_vf_free_resc(bp, vf);
-		DP(BNX2X_MSG_IOV, "vfop->rc %d\n", vfop->rc);
-		goto op_done;
+		break;
 
 	case VF_FREE:
 	case VF_RESET:
-		/* do nothing */
-		goto op_done;
 	default:
-		bnx2x_vfop_default(vf->state);
-	}
-op_err:
-	BNX2X_ERR("VF[%d] RELEASE error: rc %d\n", vf->abs_vfid, vfop->rc);
-op_done:
-	bnx2x_vfop_end(bp, vf, vfop);
-}
-
-static void bnx2x_vfop_rss(struct bnx2x *bp, struct bnx2x_virtf *vf)
-{
-	struct bnx2x_vfop *vfop = bnx2x_vfop_cur(bp, vf);
-	enum bnx2x_vfop_rss_state state;
-
-	if (!vfop) {
-		BNX2X_ERR("vfop was null\n");
-		return;
+		break;
 	}
-
-	state = vfop->state;
-	bnx2x_vfop_reset_wq(vf);
-
-	if (vfop->rc < 0)
-		goto op_err;
-
-	DP(BNX2X_MSG_IOV, "vf[%d] STATE: %d\n", vf->abs_vfid, state);
-
-	switch (state) {
-	case BNX2X_VFOP_RSS_CONFIG:
-		/* next state */
-		vfop->state = BNX2X_VFOP_RSS_DONE;
-		bnx2x_config_rss(bp, &vfop->op_p->rss);
-		bnx2x_vfop_finalize(vf, vfop->rc, VFOP_DONE);
+	return 0;
 op_err:
-		BNX2X_ERR("RSS error: rc %d\n", vfop->rc);
-op_done:
-	case BNX2X_VFOP_RSS_DONE:
-		bnx2x_vfop_end(bp, vf, vfop);
-		return;
-	default:
-		bnx2x_vfop_default(state);
-	}
-op_pending:
-	return;
-}
-
-int bnx2x_vfop_release_cmd(struct bnx2x *bp,
-			   struct bnx2x_virtf *vf,
-			   struct bnx2x_vfop_cmd *cmd)
-{
-	struct bnx2x_vfop *vfop = bnx2x_vfop_add(bp, vf);
-	if (vfop) {
-		bnx2x_vfop_opset(-1, /* use vf->state */
-				 bnx2x_vfop_release, cmd->done);
-		return bnx2x_vfop_transition(bp, vf, bnx2x_vfop_release,
-					     cmd->block);
-	}
-	return -ENOMEM;
+	BNX2X_ERR("VF[%d] RELEASE error: rc %d\n", vf->abs_vfid, rc);
+	return rc;
 }
 
-int bnx2x_vfop_rss_cmd(struct bnx2x *bp,
-		       struct bnx2x_virtf *vf,
-		       struct bnx2x_vfop_cmd *cmd)
+int bnx2x_vf_rss_update(struct bnx2x *bp, struct bnx2x_virtf *vf,
+			struct bnx2x_config_rss_params *rss)
 {
-	struct bnx2x_vfop *vfop = bnx2x_vfop_add(bp, vf);
-
-	if (vfop) {
-		bnx2x_vfop_opset(BNX2X_VFOP_RSS_CONFIG, bnx2x_vfop_rss,
-				 cmd->done);
-		return bnx2x_vfop_transition(bp, vf, bnx2x_vfop_rss,
-					     cmd->block);
-	}
-	return -ENOMEM;
+	DP(BNX2X_MSG_IOV, "vf[%d]\n", vf->abs_vfid);
+	set_bit(RAMROD_COMP_WAIT, &rss->ramrod_flags);
+	return bnx2x_config_rss(bp, rss);
 }
 
-/* VFOP tpa update, send update on all queues */
-static void bnx2x_vfop_tpa(struct bnx2x *bp, struct bnx2x_virtf *vf)
+int bnx2x_vf_tpa_update(struct bnx2x *bp, struct bnx2x_virtf *vf,
+			struct vfpf_tpa_tlv *tlv,
+			struct bnx2x_queue_update_tpa_params *params)
 {
-	struct bnx2x_vfop *vfop = bnx2x_vfop_cur(bp, vf);
-	struct bnx2x_vfop_args_tpa *tpa_args = &vfop->args.tpa;
-	enum bnx2x_vfop_tpa_state state = vfop->state;
-
-	bnx2x_vfop_reset_wq(vf);
+	aligned_u64 *sge_addr = tlv->tpa_client_info.sge_addr;
+	struct bnx2x_queue_state_params qstate;
+	int qid, rc = 0;
 
-	if (vfop->rc < 0)
-		goto op_err;
-
-	DP(BNX2X_MSG_IOV, "vf[%d:%d] STATE: %d\n",
-	   vf->abs_vfid, tpa_args->qid,
-	   state);
-
-	switch (state) {
-	case BNX2X_VFOP_TPA_CONFIG:
-
-		if (tpa_args->qid < vf_rxq_count(vf)) {
-			struct bnx2x_queue_state_params *qstate =
-				&vf->op_params.qstate;
+	DP(BNX2X_MSG_IOV, "vf[%d]\n", vf->abs_vfid);
 
-			qstate->q_obj = &bnx2x_vfq(vf, tpa_args->qid, sp_obj);
+	/* Set ramrod params */
+	memset(&qstate, 0, sizeof(struct bnx2x_queue_state_params));
+	memcpy(&qstate.params.update_tpa, params,
+	       sizeof(struct bnx2x_queue_update_tpa_params));
+	qstate.cmd = BNX2X_Q_CMD_UPDATE_TPA;
+	set_bit(RAMROD_COMP_WAIT, &qstate.ramrod_flags);
 
-			/* The only thing that changes for the ramrod params
-			 * between calls is the sge_map
-			 */
-			qstate->params.update_tpa.sge_map =
-				tpa_args->sge_map[tpa_args->qid];
-
-			DP(BNX2X_MSG_IOV, "sge_addr[%d] %08x:%08x\n",
-			   tpa_args->qid,
-			   U64_HI(qstate->params.update_tpa.sge_map),
-			   U64_LO(qstate->params.update_tpa.sge_map));
-			qstate->cmd = BNX2X_Q_CMD_UPDATE_TPA;
-			vfop->rc = bnx2x_queue_state_change(bp, qstate);
-
-			tpa_args->qid++;
-			bnx2x_vfop_finalize(vf, vfop->rc, VFOP_CONT);
+	for (qid = 0; qid < vf_rxq_count(vf); qid++) {
+		qstate.q_obj = &bnx2x_vfq(vf, qid, sp_obj);
+		qstate.params.update_tpa.sge_map = sge_addr[qid];
+		DP(BNX2X_MSG_IOV, "sge_addr[%d:%d] %08x:%08x\n",
+		   vf->abs_vfid, qid, U64_HI(sge_addr[qid]),
+		   U64_LO(sge_addr[qid]));
+		rc = bnx2x_queue_state_change(bp, &qstate);
+		if (rc) {
+			BNX2X_ERR("Failed to configure sge_addr %08x:%08x for [%d:%d]\n",
+				  U64_HI(sge_addr[qid]), U64_LO(sge_addr[qid]),
+				  vf->abs_vfid, qid);
+			return rc;
 		}
-		vfop->state = BNX2X_VFOP_TPA_DONE;
-		vfop->rc = 0;
-		bnx2x_vfop_finalize(vf, vfop->rc, VFOP_DONE);
-op_err:
-		BNX2X_ERR("TPA update error: rc %d\n", vfop->rc);
-op_done:
-	case BNX2X_VFOP_TPA_DONE:
-		bnx2x_vfop_end(bp, vf, vfop);
-		return;
-	default:
-		bnx2x_vfop_default(state);
 	}
-op_pending:
-	return;
-}
-
-int bnx2x_vfop_tpa_cmd(struct bnx2x *bp,
-			struct bnx2x_virtf *vf,
-			struct bnx2x_vfop_cmd *cmd,
-			struct vfpf_tpa_tlv *tpa_tlv)
-{
-	struct bnx2x_vfop *vfop = bnx2x_vfop_add(bp, vf);
 
-	if (vfop) {
-		vfop->args.qx.qid = 0; /* loop */
-		memcpy(&vfop->args.tpa.sge_map,
-		       tpa_tlv->tpa_client_info.sge_addr,
-		       sizeof(vfop->args.tpa.sge_map));
-		bnx2x_vfop_opset(BNX2X_VFOP_TPA_CONFIG,
-				 bnx2x_vfop_tpa, cmd->done);
-		return bnx2x_vfop_transition(bp, vf, bnx2x_vfop_tpa,
-					     cmd->block);
-	}
-	return -ENOMEM;
+	return rc;
 }
 
 /* VF release ~ VF close + VF release-resources
  * Release is the ultimate SW shutdown and is called whenever an
  * irrecoverable error is encountered.
  */
-void bnx2x_vf_release(struct bnx2x *bp, struct bnx2x_virtf *vf, bool block)
+int bnx2x_vf_release(struct bnx2x *bp, struct bnx2x_virtf *vf)
 {
-	struct bnx2x_vfop_cmd cmd = {
-		.done = NULL,
-		.block = block,
-	};
 	int rc;
 
 	DP(BNX2X_MSG_IOV, "PF releasing vf %d\n", vf->abs_vfid);
 	bnx2x_lock_vf_pf_channel(bp, vf, CHANNEL_TLV_PF_RELEASE_VF);
 
-	rc = bnx2x_vfop_release_cmd(bp, vf, &cmd);
+	rc = bnx2x_vf_free(bp, vf);
 	if (rc)
 		WARN(rc,
 		     "VF[%d] Failed to allocate resources for release op- rc=%d\n",
 		     vf->abs_vfid, rc);
+	bnx2x_unlock_vf_pf_channel(bp, vf, CHANNEL_TLV_PF_RELEASE_VF);
+	return rc;
 }
 
 static inline void bnx2x_vf_get_sbdf(struct bnx2x *bp,
@@ -3889,10 +2951,6 @@ void bnx2x_iov_task(struct work_struct *work)
 			       &bp->iov_task_state))
 		bnx2x_vf_handle_flr_event(bp);
 
-	if (test_and_clear_bit(BNX2X_IOV_CONT_VFOP,
-			       &bp->iov_task_state))
-		bnx2x_iov_vfop_cont(bp);
-
 	if (test_and_clear_bit(BNX2X_IOV_HANDLE_VF_MSG,
 			       &bp->iov_task_state))
 		bnx2x_vf_mbx(bp);
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h
index 87f7c9743f71..db73a247ecfb 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h
@@ -88,113 +88,32 @@ struct bnx2x_vf_queue {
 	bool sp_initialized;
 };
 
-/* struct bnx2x_vfop_qctor_params - prepare queue construction parameters:
- * q-init, q-setup and SB index
+/* struct bnx2x_vf_queue_construct_params - prepare queue construction
+ * parameters: q-init, q-setup and SB index
  */
-struct bnx2x_vfop_qctor_params {
+struct bnx2x_vf_queue_construct_params {
 	struct bnx2x_queue_state_params		qstate;
 	struct bnx2x_queue_setup_params		prep_qsetup;
 };
 
-/* VFOP parameters (one copy per VF) */
-union bnx2x_vfop_params {
-	struct bnx2x_vlan_mac_ramrod_params	vlan_mac;
-	struct bnx2x_rx_mode_ramrod_params	rx_mode;
-	struct bnx2x_mcast_ramrod_params	mcast;
-	struct bnx2x_config_rss_params		rss;
-	struct bnx2x_vfop_qctor_params		qctor;
-	struct bnx2x_queue_state_params		qstate;
-};
-
 /* forward */
 struct bnx2x_virtf;
 
 /* VFOP definitions */
-typedef void (*vfop_handler_t)(struct bnx2x *bp, struct bnx2x_virtf *vf);
 
-struct bnx2x_vfop_cmd {
-	vfop_handler_t done;
-	bool block;
-};
-
-/* VFOP queue filters command additional arguments */
-struct bnx2x_vfop_filter {
-	struct list_head link;
+struct bnx2x_vf_mac_vlan_filter {
 	int type;
-#define BNX2X_VFOP_FILTER_MAC	1
-#define BNX2X_VFOP_FILTER_VLAN	2
+#define BNX2X_VF_FILTER_MAC	1
+#define BNX2X_VF_FILTER_VLAN	2
 
 	bool add;
 	u8 *mac;
 	u16 vid;
 };
 
-struct bnx2x_vfop_filters {
-	int add_cnt;
-	struct list_head head;
-	struct bnx2x_vfop_filter filters[];
-};
-
-/* transient list allocated, built and saved until its
- * passed to the SP-VERBs layer.
- */
-struct bnx2x_vfop_args_mcast {
-	int mc_num;
-	struct bnx2x_mcast_list_elem *mc;
-};
-
-struct bnx2x_vfop_args_qctor {
-	int	qid;
-	u16	sb_idx;
-};
-
-struct bnx2x_vfop_args_qdtor {
-	int	qid;
-	struct eth_context *cxt;
-};
-
-struct bnx2x_vfop_args_defvlan {
-	int	qid;
-	bool	enable;
-	u16	vid;
-	u8	prio;
-};
-
-struct bnx2x_vfop_args_qx {
-	int	qid;
-	bool	en_add;
-};
-
-struct bnx2x_vfop_args_filters {
-	struct bnx2x_vfop_filters *multi_filter;
-	atomic_t *credit;	/* non NULL means 'don't consume credit' */
-};
-
-struct bnx2x_vfop_args_tpa {
-	int	   qid;
-	dma_addr_t sge_map[PFVF_MAX_QUEUES_PER_VF];
-};
-
-union bnx2x_vfop_args {
-	struct bnx2x_vfop_args_mcast	mc_list;
-	struct bnx2x_vfop_args_qctor	qctor;
-	struct bnx2x_vfop_args_qdtor	qdtor;
-	struct bnx2x_vfop_args_defvlan	defvlan;
-	struct bnx2x_vfop_args_qx	qx;
-	struct bnx2x_vfop_args_filters	filters;
-	struct bnx2x_vfop_args_tpa	tpa;
-};
-
-struct bnx2x_vfop {
-	struct list_head link;
-	int			rc;		/* return code */
-	int			state;		/* next state */
-	union bnx2x_vfop_args	args;		/* extra arguments */
-	union bnx2x_vfop_params *op_p;		/* ramrod params */
-
-	/* state machine callbacks */
-	vfop_handler_t transition;
-	vfop_handler_t done;
+struct bnx2x_vf_mac_vlan_filters {
+	int count;
+	struct bnx2x_vf_mac_vlan_filter filters[];
 };
 
 /* vf context */
@@ -214,15 +133,7 @@ struct bnx2x_virtf {
 #define VF_ENABLED	2	/* VF Enabled */
 #define VF_RESET	3	/* VF FLR'd, pending cleanup */
 
-	/* non 0 during flr cleanup */
-	u8 flr_clnup_stage;
-#define VF_FLR_CLN	1	/* reclaim resources and do 'final cleanup'
-				 * sans the end-wait
-				 */
-#define VF_FLR_ACK	2	/* ACK flr notification */
-#define VF_FLR_EPILOG	3	/* wait for VF remnants to dissipate in the HW
-				 * ~ final cleanup' end wait
-				 */
+	bool flr_clnup_stage;	/* true during flr cleanup */
 
 	/* dma */
 	dma_addr_t fw_stat_map;		/* valid iff VF_CFG_STATS */
@@ -286,11 +197,6 @@ struct bnx2x_virtf {
 	struct bnx2x_rss_config_obj     rss_conf_obj;
 
 	/* slow-path operations */
-	atomic_t			op_in_progress;
-	int				op_rc;
-	bool				op_wait_blocking;
-	struct list_head		op_list_head;
-	union bnx2x_vfop_params		op_params;
 	struct mutex			op_mutex; /* one vfop at a time mutex */
 	enum channel_tlvs		op_current;
 };
@@ -477,7 +383,6 @@ void bnx2x_iov_init_dq(struct bnx2x *bp);
 void bnx2x_iov_init_dmae(struct bnx2x *bp);
 void bnx2x_iov_set_queue_sp_obj(struct bnx2x *bp, int vf_cid,
 				struct bnx2x_queue_sp_obj **q_obj);
-void bnx2x_iov_sp_event(struct bnx2x *bp, int vf_cid);
 int bnx2x_iov_eq_sp_event(struct bnx2x *bp, union event_ring_elem *elem);
 void bnx2x_iov_adjust_stats_req(struct bnx2x *bp);
 void bnx2x_iov_storm_stats_update(struct bnx2x *bp);
@@ -497,163 +402,6 @@ int bnx2x_vf_acquire(struct bnx2x *bp, struct bnx2x_virtf *vf,
 int bnx2x_vf_init(struct bnx2x *bp, struct bnx2x_virtf *vf,
 		  dma_addr_t *sb_map);
 
-/* VFOP generic helpers */
-#define bnx2x_vfop_default(state) do {				\
-		BNX2X_ERR("Bad state %d\n", (state));		\
-		vfop->rc = -EINVAL;				\
-		goto op_err;					\
-	} while (0)
-
-enum {
-	VFOP_DONE,
-	VFOP_CONT,
-	VFOP_VERIFY_PEND,
-};
-
-#define bnx2x_vfop_finalize(vf, rc, next) do {				\
-		if ((rc) < 0)						\
-			goto op_err;					\
-		else if ((rc) > 0)					\
-			goto op_pending;				\
-		else if ((next) == VFOP_DONE)				\
-			goto op_done;					\
-		else if ((next) == VFOP_VERIFY_PEND)			\
-			BNX2X_ERR("expected pending\n");		\
-		else {							\
-			DP(BNX2X_MSG_IOV, "no ramrod. Scheduling\n");	\
-			atomic_set(&vf->op_in_progress, 1);		\
-			bnx2x_schedule_iov_task(bp,			\
-						BNX2X_IOV_CONT_VFOP);	\
-			return;						\
-		}							\
-	} while (0)
-
-#define bnx2x_vfop_opset(first_state, trans_hndlr, done_hndlr)		\
-	do {								\
-		vfop->state = first_state;				\
-		vfop->op_p = &vf->op_params;				\
-		vfop->transition = trans_hndlr;				\
-		vfop->done = done_hndlr;				\
-	} while (0)
-
-static inline struct bnx2x_vfop *bnx2x_vfop_cur(struct bnx2x *bp,
-						struct bnx2x_virtf *vf)
-{
-	WARN(!mutex_is_locked(&vf->op_mutex), "about to access vf op linked list but mutex was not locked!");
-	WARN_ON(list_empty(&vf->op_list_head));
-	return list_first_entry(&vf->op_list_head, struct bnx2x_vfop, link);
-}
-
-static inline struct bnx2x_vfop *bnx2x_vfop_add(struct bnx2x *bp,
-						struct bnx2x_virtf *vf)
-{
-	struct bnx2x_vfop *vfop = kzalloc(sizeof(*vfop), GFP_KERNEL);
-
-	WARN(!mutex_is_locked(&vf->op_mutex), "about to access vf op linked list but mutex was not locked!");
-	if (vfop) {
-		INIT_LIST_HEAD(&vfop->link);
-		list_add(&vfop->link, &vf->op_list_head);
-	}
-	return vfop;
-}
-
-static inline void bnx2x_vfop_end(struct bnx2x *bp, struct bnx2x_virtf *vf,
-				  struct bnx2x_vfop *vfop)
-{
-	/* rc < 0 - error, otherwise set to 0 */
-	DP(BNX2X_MSG_IOV, "rc was %d\n", vfop->rc);
-	if (vfop->rc >= 0)
-		vfop->rc = 0;
-	DP(BNX2X_MSG_IOV, "rc is now %d\n", vfop->rc);
-
-	/* unlink the current op context and propagate error code
-	 * must be done before invoking the 'done()' handler
-	 */
-	WARN(!mutex_is_locked(&vf->op_mutex),
-	     "about to access vf op linked list but mutex was not locked!");
-	list_del(&vfop->link);
-
-	if (list_empty(&vf->op_list_head)) {
-		DP(BNX2X_MSG_IOV, "list was empty %d\n", vfop->rc);
-		vf->op_rc = vfop->rc;
-		DP(BNX2X_MSG_IOV, "copying rc vf->op_rc %d,  vfop->rc %d\n",
-		   vf->op_rc, vfop->rc);
-	} else {
-		struct bnx2x_vfop *cur_vfop;
-
-		DP(BNX2X_MSG_IOV, "list not empty %d\n", vfop->rc);
-		cur_vfop = bnx2x_vfop_cur(bp, vf);
-		cur_vfop->rc = vfop->rc;
-		DP(BNX2X_MSG_IOV, "copying rc vf->op_rc %d, vfop->rc %d\n",
-		   vf->op_rc, vfop->rc);
-	}
-
-	/* invoke done handler */
-	if (vfop->done) {
-		DP(BNX2X_MSG_IOV, "calling done handler\n");
-		vfop->done(bp, vf);
-	} else {
-		/* there is no done handler for the operation to unlock
-		 * the mutex. Must have gotten here from PF initiated VF RELEASE
-		 */
-		bnx2x_unlock_vf_pf_channel(bp, vf, CHANNEL_TLV_PF_RELEASE_VF);
-	}
-
-	DP(BNX2X_MSG_IOV, "done handler complete. vf->op_rc %d, vfop->rc %d\n",
-	   vf->op_rc, vfop->rc);
-
-	/* if this is the last nested op reset the wait_blocking flag
-	 * to release any blocking wrappers, only after 'done()' is invoked
-	 */
-	if (list_empty(&vf->op_list_head)) {
-		DP(BNX2X_MSG_IOV, "list was empty after done %d\n", vfop->rc);
-		vf->op_wait_blocking = false;
-	}
-
-	kfree(vfop);
-}
-
-static inline int bnx2x_vfop_wait_blocking(struct bnx2x *bp,
-					   struct bnx2x_virtf *vf)
-{
-	/* can take a while if any port is running */
-	int cnt = 5000;
-
-	might_sleep();
-	while (cnt--) {
-		if (vf->op_wait_blocking == false) {
-#ifdef BNX2X_STOP_ON_ERROR
-			DP(BNX2X_MSG_IOV, "exit  (cnt %d)\n", 5000 - cnt);
-#endif
-			return 0;
-		}
-		usleep_range(1000, 2000);
-
-		if (bp->panic)
-			return -EIO;
-	}
-
-	/* timeout! */
-#ifdef BNX2X_STOP_ON_ERROR
-	bnx2x_panic();
-#endif
-
-	return -EBUSY;
-}
-
-static inline int bnx2x_vfop_transition(struct bnx2x *bp,
-					struct bnx2x_virtf *vf,
-					vfop_handler_t transition,
-					bool block)
-{
-	if (block)
-		vf->op_wait_blocking = true;
-	transition(bp, vf);
-	if (block)
-		return bnx2x_vfop_wait_blocking(bp, vf);
-	return 0;
-}
-
 /* VFOP queue construction helpers */
 void bnx2x_vfop_qctor_dump_tx(struct bnx2x *bp, struct bnx2x_virtf *vf,
 			    struct bnx2x_queue_init_params *init_params,
@@ -668,64 +416,41 @@ void bnx2x_vfop_qctor_dump_rx(struct bnx2x *bp, struct bnx2x_virtf *vf,
 void bnx2x_vfop_qctor_prep(struct bnx2x *bp,
 			   struct bnx2x_virtf *vf,
 			   struct bnx2x_vf_queue *q,
-			   struct bnx2x_vfop_qctor_params *p,
+			   struct bnx2x_vf_queue_construct_params *p,
 			   unsigned long q_type);
-int bnx2x_vfop_mac_list_cmd(struct bnx2x *bp,
-			    struct bnx2x_virtf *vf,
-			    struct bnx2x_vfop_cmd *cmd,
-			    struct bnx2x_vfop_filters *macs,
-			    int qid, bool drv_only);
-
-int bnx2x_vfop_vlan_list_cmd(struct bnx2x *bp,
-			     struct bnx2x_virtf *vf,
-			     struct bnx2x_vfop_cmd *cmd,
-			     struct bnx2x_vfop_filters *vlans,
-			     int qid, bool drv_only);
-
-int bnx2x_vfop_qsetup_cmd(struct bnx2x *bp,
-			  struct bnx2x_virtf *vf,
-			  struct bnx2x_vfop_cmd *cmd,
-			  int qid);
-
-int bnx2x_vfop_qdown_cmd(struct bnx2x *bp,
-			 struct bnx2x_virtf *vf,
-			 struct bnx2x_vfop_cmd *cmd,
-			 int qid);
-
-int bnx2x_vfop_mcast_cmd(struct bnx2x *bp,
-			 struct bnx2x_virtf *vf,
-			 struct bnx2x_vfop_cmd *cmd,
-			 bnx2x_mac_addr_t *mcasts,
-			 int mcast_num, bool drv_only);
-
-int bnx2x_vfop_rxmode_cmd(struct bnx2x *bp,
-			  struct bnx2x_virtf *vf,
-			  struct bnx2x_vfop_cmd *cmd,
-			  int qid, unsigned long accept_flags);
-
-int bnx2x_vfop_close_cmd(struct bnx2x *bp,
-			 struct bnx2x_virtf *vf,
-			 struct bnx2x_vfop_cmd *cmd);
-
-int bnx2x_vfop_release_cmd(struct bnx2x *bp,
-			   struct bnx2x_virtf *vf,
-			   struct bnx2x_vfop_cmd *cmd);
 
-int bnx2x_vfop_rss_cmd(struct bnx2x *bp,
-		       struct bnx2x_virtf *vf,
-		       struct bnx2x_vfop_cmd *cmd);
+int bnx2x_vf_mac_vlan_config_list(struct bnx2x *bp, struct bnx2x_virtf *vf,
+				  struct bnx2x_vf_mac_vlan_filters *filters,
+				  int qid, bool drv_only);
+
+int bnx2x_vf_queue_setup(struct bnx2x *bp, struct bnx2x_virtf *vf, int qid,
+			 struct bnx2x_vf_queue_construct_params *qctor);
+
+int bnx2x_vf_queue_teardown(struct bnx2x *bp, struct bnx2x_virtf *vf, int qid);
+
+int bnx2x_vf_mcast(struct bnx2x *bp, struct bnx2x_virtf *vf,
+		   bnx2x_mac_addr_t *mcasts, int mc_num, bool drv_only);
+
+int bnx2x_vf_rxmode(struct bnx2x *bp, struct bnx2x_virtf *vf,
+		    int qid, unsigned long accept_flags);
+
+int bnx2x_vf_close(struct bnx2x *bp, struct bnx2x_virtf *vf);
+
+int bnx2x_vf_free(struct bnx2x *bp, struct bnx2x_virtf *vf);
+
+int bnx2x_vf_rss_update(struct bnx2x *bp, struct bnx2x_virtf *vf,
+			struct bnx2x_config_rss_params *rss);
 
-int bnx2x_vfop_tpa_cmd(struct bnx2x *bp,
-		       struct bnx2x_virtf *vf,
-		       struct bnx2x_vfop_cmd *cmd,
-		       struct vfpf_tpa_tlv *tpa_tlv);
+int bnx2x_vf_tpa_update(struct bnx2x *bp, struct bnx2x_virtf *vf,
+			struct vfpf_tpa_tlv *tlv,
+			struct bnx2x_queue_update_tpa_params *params);
 
 /* VF release ~ VF close + VF release-resources
  *
  * Release is the ultimate SW shutdown and is called whenever an
  * irrecoverable error is encountered.
  */
-void bnx2x_vf_release(struct bnx2x *bp, struct bnx2x_virtf *vf, bool block);
+int bnx2x_vf_release(struct bnx2x *bp, struct bnx2x_virtf *vf);
 int bnx2x_vf_idx_by_abs_fid(struct bnx2x *bp, u16 abs_vfid);
 u8 bnx2x_vf_max_queue_cnt(struct bnx2x *bp, struct bnx2x_virtf *vf);
 
@@ -796,7 +521,6 @@ void bnx2x_schedule_iov_task(struct bnx2x *bp, enum bnx2x_iov_flag flag);
 
 static inline void bnx2x_iov_set_queue_sp_obj(struct bnx2x *bp, int vf_cid,
 				struct bnx2x_queue_sp_obj **q_obj) {}
-static inline void bnx2x_iov_sp_event(struct bnx2x *bp, int vf_cid) {}
 static inline void bnx2x_vf_handle_flr_event(struct bnx2x *bp) {}
 static inline int bnx2x_iov_eq_sp_event(struct bnx2x *bp,
 					union event_ring_elem *elem) {return 1; }
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c
index 63c95658ba60..fe3737e56d08 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c
@@ -673,6 +673,7 @@ static int bnx2x_vfpf_teardown_queue(struct bnx2x *bp, int qidx)
 
 out:
 	bnx2x_vfpf_finalize(bp, &req->first_tlv);
+
 	return rc;
 }
 
@@ -1048,7 +1049,8 @@ static void bnx2x_vf_mbx_resp_single_tlv(struct bnx2x *bp,
 }
 
 static void bnx2x_vf_mbx_resp_send_msg(struct bnx2x *bp,
-				       struct bnx2x_virtf *vf)
+				       struct bnx2x_virtf *vf,
+				       int vf_rc)
 {
 	struct bnx2x_vf_mbx *mbx = BP_VF_MBX(bp, vf->index);
 	struct pfvf_general_resp_tlv *resp = &mbx->msg->resp.general_resp;
@@ -1060,7 +1062,7 @@ static void bnx2x_vf_mbx_resp_send_msg(struct bnx2x *bp,
 	DP(BNX2X_MSG_IOV, "mailbox vf address hi 0x%x, lo 0x%x, offset 0x%x\n",
 	   mbx->vf_addr_hi, mbx->vf_addr_lo, mbx->first_tlv.resp_msg_offset);
 
-	resp->hdr.status = bnx2x_pfvf_status_codes(vf->op_rc);
+	resp->hdr.status = bnx2x_pfvf_status_codes(vf_rc);
 
 	/* send response */
 	vf_addr = HILO_U64(mbx->vf_addr_hi, mbx->vf_addr_lo) +
@@ -1108,14 +1110,15 @@ static void bnx2x_vf_mbx_resp_send_msg(struct bnx2x *bp,
 	return;
 
 mbx_error:
-	bnx2x_vf_release(bp, vf, false); /* non blocking */
+	bnx2x_vf_release(bp, vf);
 }
 
 static void bnx2x_vf_mbx_resp(struct bnx2x *bp,
-				       struct bnx2x_virtf *vf)
+			      struct bnx2x_virtf *vf,
+			      int rc)
 {
 	bnx2x_vf_mbx_resp_single_tlv(bp, vf);
-	bnx2x_vf_mbx_resp_send_msg(bp, vf);
+	bnx2x_vf_mbx_resp_send_msg(bp, vf, rc);
 }
 
 static void bnx2x_vf_mbx_resp_phys_port(struct bnx2x *bp,
@@ -1239,8 +1242,7 @@ static void bnx2x_vf_mbx_acquire_resp(struct bnx2x *bp, struct bnx2x_virtf *vf,
 		      sizeof(struct channel_list_end_tlv));
 
 	/* send the response */
-	vf->op_rc = vfop_status;
-	bnx2x_vf_mbx_resp_send_msg(bp, vf);
+	bnx2x_vf_mbx_resp_send_msg(bp, vf, vfop_status);
 }
 
 static void bnx2x_vf_mbx_acquire(struct bnx2x *bp, struct bnx2x_virtf *vf,
@@ -1272,19 +1274,20 @@ static void bnx2x_vf_mbx_init_vf(struct bnx2x *bp, struct bnx2x_virtf *vf,
 			      struct bnx2x_vf_mbx *mbx)
 {
 	struct vfpf_init_tlv *init = &mbx->msg->req.init;
+	int rc;
 
 	/* record ghost addresses from vf message */
 	vf->spq_map = init->spq_addr;
 	vf->fw_stat_map = init->stats_addr;
 	vf->stats_stride = init->stats_stride;
-	vf->op_rc = bnx2x_vf_init(bp, vf, (dma_addr_t *)init->sb_addr);
+	rc = bnx2x_vf_init(bp, vf, (dma_addr_t *)init->sb_addr);
 
 	/* set VF multiqueue statistics collection mode */
 	if (init->flags & VFPF_INIT_FLG_STATS_COALESCE)
 		vf->cfg_flags |= VF_CFG_STATS_COALESCE;
 
 	/* response */
-	bnx2x_vf_mbx_resp(bp, vf);
+	bnx2x_vf_mbx_resp(bp, vf, rc);
 }
 
 /* convert MBX queue-flags to standard SP queue-flags */
@@ -1319,16 +1322,14 @@ static void bnx2x_vf_mbx_setup_q(struct bnx2x *bp, struct bnx2x_virtf *vf,
 				 struct bnx2x_vf_mbx *mbx)
 {
 	struct vfpf_setup_q_tlv *setup_q = &mbx->msg->req.setup_q;
-	struct bnx2x_vfop_cmd cmd = {
-		.done = bnx2x_vf_mbx_resp,
-		.block = false,
-	};
+	struct bnx2x_vf_queue_construct_params qctor;
+	int rc = 0;
 
 	/* verify vf_qid */
 	if (setup_q->vf_qid >= vf_rxq_count(vf)) {
 		BNX2X_ERR("vf_qid %d invalid, max queue count is %d\n",
 			  setup_q->vf_qid, vf_rxq_count(vf));
-		vf->op_rc = -EINVAL;
+		rc = -EINVAL;
 		goto response;
 	}
 
@@ -1346,9 +1347,10 @@ static void bnx2x_vf_mbx_setup_q(struct bnx2x *bp, struct bnx2x_virtf *vf,
 			bnx2x_leading_vfq_init(bp, vf, q);
 
 		/* re-init the VF operation context */
-		memset(&vf->op_params.qctor, 0 , sizeof(vf->op_params.qctor));
-		setup_p = &vf->op_params.qctor.prep_qsetup;
-		init_p =  &vf->op_params.qctor.qstate.params.init;
+		memset(&qctor, 0 ,
+		       sizeof(struct bnx2x_vf_queue_construct_params));
+		setup_p = &qctor.prep_qsetup;
+		init_p =  &qctor.qstate.params.init;
 
 		/* activate immediately */
 		__set_bit(BNX2X_Q_FLG_ACTIVE, &setup_p->flags);
@@ -1434,44 +1436,34 @@ static void bnx2x_vf_mbx_setup_q(struct bnx2x *bp, struct bnx2x_virtf *vf,
 						 q->index, q->sb_idx);
 		}
 		/* complete the preparations */
-		bnx2x_vfop_qctor_prep(bp, vf, q, &vf->op_params.qctor, q_type);
+		bnx2x_vfop_qctor_prep(bp, vf, q, &qctor, q_type);
 
-		vf->op_rc = bnx2x_vfop_qsetup_cmd(bp, vf, &cmd, q->index);
-		if (vf->op_rc)
+		rc = bnx2x_vf_queue_setup(bp, vf, q->index, &qctor);
+		if (rc)
 			goto response;
-		return;
 	}
 response:
-	bnx2x_vf_mbx_resp(bp, vf);
+	bnx2x_vf_mbx_resp(bp, vf, rc);
 }
 
-enum bnx2x_vfop_filters_state {
-	   BNX2X_VFOP_MBX_Q_FILTERS_MACS,
-	   BNX2X_VFOP_MBX_Q_FILTERS_VLANS,
-	   BNX2X_VFOP_MBX_Q_FILTERS_RXMODE,
-	   BNX2X_VFOP_MBX_Q_FILTERS_MCAST,
-	   BNX2X_VFOP_MBX_Q_FILTERS_DONE
-};
-
 static int bnx2x_vf_mbx_macvlan_list(struct bnx2x *bp,
 				     struct bnx2x_virtf *vf,
 				     struct vfpf_set_q_filters_tlv *tlv,
-				     struct bnx2x_vfop_filters **pfl,
+				     struct bnx2x_vf_mac_vlan_filters **pfl,
 				     u32 type_flag)
 {
 	int i, j;
-	struct bnx2x_vfop_filters *fl = NULL;
+	struct bnx2x_vf_mac_vlan_filters *fl = NULL;
 	size_t fsz;
 
-	fsz = tlv->n_mac_vlan_filters * sizeof(struct bnx2x_vfop_filter) +
-		sizeof(struct bnx2x_vfop_filters);
+	fsz = tlv->n_mac_vlan_filters *
+	      sizeof(struct bnx2x_vf_mac_vlan_filter) +
+	      sizeof(struct bnx2x_vf_mac_vlan_filters);
 
 	fl = kzalloc(fsz, GFP_KERNEL);
 	if (!fl)
 		return -ENOMEM;
 
-	INIT_LIST_HEAD(&fl->head);
-
 	for (i = 0, j = 0; i < tlv->n_mac_vlan_filters; i++) {
 		struct vfpf_q_mac_vlan_filter *msg_filter = &tlv->filters[i];
 
@@ -1479,17 +1471,17 @@ static int bnx2x_vf_mbx_macvlan_list(struct bnx2x *bp,
 			continue;
 		if (type_flag == VFPF_Q_FILTER_DEST_MAC_VALID) {
 			fl->filters[j].mac = msg_filter->mac;
-			fl->filters[j].type = BNX2X_VFOP_FILTER_MAC;
+			fl->filters[j].type = BNX2X_VF_FILTER_MAC;
 		} else {
 			fl->filters[j].vid = msg_filter->vlan_tag;
-			fl->filters[j].type = BNX2X_VFOP_FILTER_VLAN;
+			fl->filters[j].type = BNX2X_VF_FILTER_VLAN;
 		}
 		fl->filters[j].add =
 			(msg_filter->flags & VFPF_Q_FILTER_SET_MAC) ?
 			true : false;
-		list_add_tail(&fl->filters[j++].link, &fl->head);
+		fl->count++;
 	}
-	if (list_empty(&fl->head))
+	if (!fl->count)
 		kfree(fl);
 	else
 		*pfl = fl;
@@ -1529,168 +1521,97 @@ static void bnx2x_vf_mbx_dp_q_filters(struct bnx2x *bp, int msglvl,
 #define VFPF_MAC_FILTER		VFPF_Q_FILTER_DEST_MAC_VALID
 #define VFPF_VLAN_FILTER	VFPF_Q_FILTER_VLAN_TAG_VALID
 
-static void bnx2x_vfop_mbx_qfilters(struct bnx2x *bp, struct bnx2x_virtf *vf)
+static int bnx2x_vf_mbx_qfilters(struct bnx2x *bp, struct bnx2x_virtf *vf)
 {
-	int rc;
+	int rc = 0;
 
 	struct vfpf_set_q_filters_tlv *msg =
 		&BP_VF_MBX(bp, vf->index)->msg->req.set_q_filters;
 
-	struct bnx2x_vfop *vfop = bnx2x_vfop_cur(bp, vf);
-	enum bnx2x_vfop_filters_state state = vfop->state;
-
-	struct bnx2x_vfop_cmd cmd = {
-		.done = bnx2x_vfop_mbx_qfilters,
-		.block = false,
-	};
+	/* check for any mac/vlan changes */
+	if (msg->flags & VFPF_SET_Q_FILTERS_MAC_VLAN_CHANGED) {
+		/* build mac list */
+		struct bnx2x_vf_mac_vlan_filters *fl = NULL;
 
-	DP(BNX2X_MSG_IOV, "STATE: %d\n", state);
-
-	if (vfop->rc < 0)
-		goto op_err;
-
-	switch (state) {
-	case BNX2X_VFOP_MBX_Q_FILTERS_MACS:
-		/* next state */
-		vfop->state = BNX2X_VFOP_MBX_Q_FILTERS_VLANS;
+		rc = bnx2x_vf_mbx_macvlan_list(bp, vf, msg, &fl,
+					       VFPF_MAC_FILTER);
+		if (rc)
+			goto op_err;
 
-		/* check for any vlan/mac changes */
-		if (msg->flags & VFPF_SET_Q_FILTERS_MAC_VLAN_CHANGED) {
-			/* build mac list */
-			struct bnx2x_vfop_filters *fl = NULL;
+		if (fl) {
 
-			vfop->rc = bnx2x_vf_mbx_macvlan_list(bp, vf, msg, &fl,
-							     VFPF_MAC_FILTER);
-			if (vfop->rc)
+			/* set mac list */
+			rc = bnx2x_vf_mac_vlan_config_list(bp, vf, fl,
+							   msg->vf_qid,
+							   false);
+			if (rc)
 				goto op_err;
-
-			if (fl) {
-				/* set mac list */
-				rc = bnx2x_vfop_mac_list_cmd(bp, vf, &cmd, fl,
-							     msg->vf_qid,
-							     false);
-				if (rc) {
-					vfop->rc = rc;
-					goto op_err;
-				}
-				return;
-			}
 		}
-		/* fall through */
-
-	case BNX2X_VFOP_MBX_Q_FILTERS_VLANS:
-		/* next state */
-		vfop->state = BNX2X_VFOP_MBX_Q_FILTERS_RXMODE;
 
-		/* check for any vlan/mac changes */
-		if (msg->flags & VFPF_SET_Q_FILTERS_MAC_VLAN_CHANGED) {
-			/* build vlan list */
-			struct bnx2x_vfop_filters *fl = NULL;
+		/* build vlan list */
+		fl = NULL;
 
-			vfop->rc = bnx2x_vf_mbx_macvlan_list(bp, vf, msg, &fl,
-							     VFPF_VLAN_FILTER);
-			if (vfop->rc)
+		rc = bnx2x_vf_mbx_macvlan_list(bp, vf, msg, &fl,
+					       VFPF_VLAN_FILTER);
+		if (rc)
+			goto op_err;
+
+		if (fl) {
+			/* set vlan list */
+			rc = bnx2x_vf_mac_vlan_config_list(bp, vf, fl,
+							   msg->vf_qid,
+							   false);
+			if (rc)
 				goto op_err;
-
-			if (fl) {
-				/* set vlan list */
-				rc = bnx2x_vfop_vlan_list_cmd(bp, vf, &cmd, fl,
-							      msg->vf_qid,
-							      false);
-				if (rc) {
-					vfop->rc = rc;
-					goto op_err;
-				}
-				return;
-			}
 		}
-		/* fall through */
+	}
 
-	case BNX2X_VFOP_MBX_Q_FILTERS_RXMODE:
-		/* next state */
-		vfop->state = BNX2X_VFOP_MBX_Q_FILTERS_MCAST;
+	if (msg->flags & VFPF_SET_Q_FILTERS_RX_MASK_CHANGED) {
+		unsigned long accept = 0;
+		struct pf_vf_bulletin_content *bulletin =
+					BP_VF_BULLETIN(bp, vf->index);
 
-		if (msg->flags & VFPF_SET_Q_FILTERS_RX_MASK_CHANGED) {
-			unsigned long accept = 0;
-			struct pf_vf_bulletin_content *bulletin =
-				BP_VF_BULLETIN(bp, vf->index);
+		/* covert VF-PF if mask to bnx2x accept flags */
+		if (msg->rx_mask & VFPF_RX_MASK_ACCEPT_MATCHED_UNICAST)
+			__set_bit(BNX2X_ACCEPT_UNICAST, &accept);
 
-			/* covert VF-PF if mask to bnx2x accept flags */
-			if (msg->rx_mask & VFPF_RX_MASK_ACCEPT_MATCHED_UNICAST)
-				__set_bit(BNX2X_ACCEPT_UNICAST, &accept);
+		if (msg->rx_mask & VFPF_RX_MASK_ACCEPT_MATCHED_MULTICAST)
+			__set_bit(BNX2X_ACCEPT_MULTICAST, &accept);
 
-			if (msg->rx_mask &
-					VFPF_RX_MASK_ACCEPT_MATCHED_MULTICAST)
-				__set_bit(BNX2X_ACCEPT_MULTICAST, &accept);
+		if (msg->rx_mask & VFPF_RX_MASK_ACCEPT_ALL_UNICAST)
+			__set_bit(BNX2X_ACCEPT_ALL_UNICAST, &accept);
 
-			if (msg->rx_mask & VFPF_RX_MASK_ACCEPT_ALL_UNICAST)
-				__set_bit(BNX2X_ACCEPT_ALL_UNICAST, &accept);
+		if (msg->rx_mask & VFPF_RX_MASK_ACCEPT_ALL_MULTICAST)
+			__set_bit(BNX2X_ACCEPT_ALL_MULTICAST, &accept);
 
-			if (msg->rx_mask & VFPF_RX_MASK_ACCEPT_ALL_MULTICAST)
-				__set_bit(BNX2X_ACCEPT_ALL_MULTICAST, &accept);
+		if (msg->rx_mask & VFPF_RX_MASK_ACCEPT_BROADCAST)
+			__set_bit(BNX2X_ACCEPT_BROADCAST, &accept);
 
-			if (msg->rx_mask & VFPF_RX_MASK_ACCEPT_BROADCAST)
-				__set_bit(BNX2X_ACCEPT_BROADCAST, &accept);
-
-			/* A packet arriving the vf's mac should be accepted
-			 * with any vlan, unless a vlan has already been
-			 * configured.
-			 */
-			if (!(bulletin->valid_bitmap & (1 << VLAN_VALID)))
-				__set_bit(BNX2X_ACCEPT_ANY_VLAN, &accept);
-
-			/* set rx-mode */
-			rc = bnx2x_vfop_rxmode_cmd(bp, vf, &cmd,
-						   msg->vf_qid, accept);
-			if (rc) {
-				vfop->rc = rc;
-				goto op_err;
-			}
-			return;
-		}
-		/* fall through */
-
-	case BNX2X_VFOP_MBX_Q_FILTERS_MCAST:
-		/* next state */
-		vfop->state = BNX2X_VFOP_MBX_Q_FILTERS_DONE;
-
-		if (msg->flags & VFPF_SET_Q_FILTERS_MULTICAST_CHANGED) {
-			/* set mcasts */
-			rc = bnx2x_vfop_mcast_cmd(bp, vf, &cmd, msg->multicast,
-						  msg->n_multicast, false);
-			if (rc) {
-				vfop->rc = rc;
-				goto op_err;
-			}
-			return;
-		}
-		/* fall through */
-op_done:
-	case BNX2X_VFOP_MBX_Q_FILTERS_DONE:
-		bnx2x_vfop_end(bp, vf, vfop);
-		return;
-op_err:
-	BNX2X_ERR("QFILTERS[%d:%d] error: rc %d\n",
-		  vf->abs_vfid, msg->vf_qid, vfop->rc);
-	goto op_done;
+		/* A packet arriving the vf's mac should be accepted
+		 * with any vlan, unless a vlan has already been
+		 * configured.
+		 */
+		if (!(bulletin->valid_bitmap & (1 << VLAN_VALID)))
+			__set_bit(BNX2X_ACCEPT_ANY_VLAN, &accept);
 
-	default:
-		bnx2x_vfop_default(state);
+		/* set rx-mode */
+		rc = bnx2x_vf_rxmode(bp, vf, msg->vf_qid, accept);
+		if (rc)
+			goto op_err;
 	}
-}
 
-static int bnx2x_vfop_mbx_qfilters_cmd(struct bnx2x *bp,
-					struct bnx2x_virtf *vf,
-					struct bnx2x_vfop_cmd *cmd)
-{
-	struct bnx2x_vfop *vfop = bnx2x_vfop_add(bp, vf);
-	if (vfop) {
-		bnx2x_vfop_opset(BNX2X_VFOP_MBX_Q_FILTERS_MACS,
-				 bnx2x_vfop_mbx_qfilters, cmd->done);
-		return bnx2x_vfop_transition(bp, vf, bnx2x_vfop_mbx_qfilters,
-					     cmd->block);
+	if (msg->flags & VFPF_SET_Q_FILTERS_MULTICAST_CHANGED) {
+		/* set mcasts */
+		rc = bnx2x_vf_mcast(bp, vf, msg->multicast,
+				    msg->n_multicast, false);
+		if (rc)
+			goto op_err;
 	}
-	return -ENOMEM;
+op_err:
+	if (rc)
+		BNX2X_ERR("QFILTERS[%d:%d] error: rc %d\n",
+			  vf->abs_vfid, msg->vf_qid, rc);
+	return rc;
 }
 
 static int bnx2x_filters_validate_mac(struct bnx2x *bp,
@@ -1710,7 +1631,6 @@ static int bnx2x_filters_validate_mac(struct bnx2x *bp,
 		if (filters->n_mac_vlan_filters > 1) {
 			BNX2X_ERR("VF[%d] requested the addition of multiple macs after set_vf_mac ndo was called\n",
 				  vf->abs_vfid);
-			vf->op_rc = -EPERM;
 			rc = -EPERM;
 			goto response;
 		}
@@ -1721,7 +1641,6 @@ static int bnx2x_filters_validate_mac(struct bnx2x *bp,
 			BNX2X_ERR("VF[%d] requested the addition of a mac address not matching the one configured by set_vf_mac ndo\n",
 				  vf->abs_vfid);
 
-			vf->op_rc = -EPERM;
 			rc = -EPERM;
 			goto response;
 		}
@@ -1748,7 +1667,6 @@ static int bnx2x_filters_validate_vlan(struct bnx2x *bp,
 			    VFPF_Q_FILTER_VLAN_TAG_VALID) {
 				BNX2X_ERR("VF[%d] attempted to configure vlan but one was already set by Hypervisor. Aborting request\n",
 					  vf->abs_vfid);
-				vf->op_rc = -EPERM;
 				rc = -EPERM;
 				goto response;
 			}
@@ -1770,15 +1688,14 @@ static void bnx2x_vf_mbx_set_q_filters(struct bnx2x *bp,
 				       struct bnx2x_vf_mbx *mbx)
 {
 	struct vfpf_set_q_filters_tlv *filters = &mbx->msg->req.set_q_filters;
-	struct bnx2x_vfop_cmd cmd = {
-		.done = bnx2x_vf_mbx_resp,
-		.block = false,
-	};
+	int rc;
 
-	if (bnx2x_filters_validate_mac(bp, vf, filters))
+	rc = bnx2x_filters_validate_mac(bp, vf, filters);
+	if (rc)
 		goto response;
 
-	if (bnx2x_filters_validate_vlan(bp, vf, filters))
+	rc = bnx2x_filters_validate_vlan(bp, vf, filters);
+	if (rc)
 		goto response;
 
 	DP(BNX2X_MSG_IOV, "VF[%d] Q_FILTERS: queue[%d]\n",
@@ -1788,125 +1705,105 @@ static void bnx2x_vf_mbx_set_q_filters(struct bnx2x *bp,
 	/* print q_filter message */
 	bnx2x_vf_mbx_dp_q_filters(bp, BNX2X_MSG_IOV, filters);
 
-	vf->op_rc = bnx2x_vfop_mbx_qfilters_cmd(bp, vf, &cmd);
-	if (vf->op_rc)
-		goto response;
-	return;
-
+	rc = bnx2x_vf_mbx_qfilters(bp, vf);
 response:
-	bnx2x_vf_mbx_resp(bp, vf);
+	bnx2x_vf_mbx_resp(bp, vf, rc);
 }
 
 static void bnx2x_vf_mbx_teardown_q(struct bnx2x *bp, struct bnx2x_virtf *vf,
 				    struct bnx2x_vf_mbx *mbx)
 {
 	int qid = mbx->msg->req.q_op.vf_qid;
-	struct bnx2x_vfop_cmd cmd = {
-		.done = bnx2x_vf_mbx_resp,
-		.block = false,
-	};
+	int rc;
 
 	DP(BNX2X_MSG_IOV, "VF[%d] Q_TEARDOWN: vf_qid=%d\n",
 	   vf->abs_vfid, qid);
 
-	vf->op_rc = bnx2x_vfop_qdown_cmd(bp, vf, &cmd, qid);
-	if (vf->op_rc)
-		bnx2x_vf_mbx_resp(bp, vf);
+	rc = bnx2x_vf_queue_teardown(bp, vf, qid);
+	bnx2x_vf_mbx_resp(bp, vf, rc);
 }
 
 static void bnx2x_vf_mbx_close_vf(struct bnx2x *bp, struct bnx2x_virtf *vf,
 				  struct bnx2x_vf_mbx *mbx)
 {
-	struct bnx2x_vfop_cmd cmd = {
-		.done = bnx2x_vf_mbx_resp,
-		.block = false,
-	};
+	int rc;
 
 	DP(BNX2X_MSG_IOV, "VF[%d] VF_CLOSE\n", vf->abs_vfid);
 
-	vf->op_rc = bnx2x_vfop_close_cmd(bp, vf, &cmd);
-	if (vf->op_rc)
-		bnx2x_vf_mbx_resp(bp, vf);
+	rc = bnx2x_vf_close(bp, vf);
+	bnx2x_vf_mbx_resp(bp, vf, rc);
 }
 
 static void bnx2x_vf_mbx_release_vf(struct bnx2x *bp, struct bnx2x_virtf *vf,
 				    struct bnx2x_vf_mbx *mbx)
 {
-	struct bnx2x_vfop_cmd cmd = {
-		.done = bnx2x_vf_mbx_resp,
-		.block = false,
-	};
+	int rc;
 
 	DP(BNX2X_MSG_IOV, "VF[%d] VF_RELEASE\n", vf->abs_vfid);
 
-	vf->op_rc = bnx2x_vfop_release_cmd(bp, vf, &cmd);
-	if (vf->op_rc)
-		bnx2x_vf_mbx_resp(bp, vf);
+	rc = bnx2x_vf_free(bp, vf);
+	bnx2x_vf_mbx_resp(bp, vf, rc);
 }
 
 static void bnx2x_vf_mbx_update_rss(struct bnx2x *bp, struct bnx2x_virtf *vf,
 				    struct bnx2x_vf_mbx *mbx)
 {
-	struct bnx2x_vfop_cmd cmd = {
-		.done = bnx2x_vf_mbx_resp,
-		.block = false,
-	};
-	struct bnx2x_config_rss_params *vf_op_params = &vf->op_params.rss;
+	struct bnx2x_config_rss_params rss;
 	struct vfpf_rss_tlv *rss_tlv = &mbx->msg->req.update_rss;
+	int rc = 0;
 
 	if (rss_tlv->ind_table_size != T_ETH_INDIRECTION_TABLE_SIZE ||
 	    rss_tlv->rss_key_size != T_ETH_RSS_KEY) {
 		BNX2X_ERR("failing rss configuration of vf %d due to size mismatch\n",
 			  vf->index);
-		vf->op_rc = -EINVAL;
+		rc = -EINVAL;
 		goto mbx_resp;
 	}
 
+	memset(&rss, 0, sizeof(struct bnx2x_config_rss_params));
+
 	/* set vfop params according to rss tlv */
-	memcpy(vf_op_params->ind_table, rss_tlv->ind_table,
+	memcpy(rss.ind_table, rss_tlv->ind_table,
 	       T_ETH_INDIRECTION_TABLE_SIZE);
-	memcpy(vf_op_params->rss_key, rss_tlv->rss_key,
-	       sizeof(rss_tlv->rss_key));
-	vf_op_params->rss_obj = &vf->rss_conf_obj;
-	vf_op_params->rss_result_mask = rss_tlv->rss_result_mask;
+	memcpy(rss.rss_key, rss_tlv->rss_key, sizeof(rss_tlv->rss_key));
+	rss.rss_obj = &vf->rss_conf_obj;
+	rss.rss_result_mask = rss_tlv->rss_result_mask;
 
 	/* flags handled individually for backward/forward compatability */
-	vf_op_params->rss_flags = 0;
-	vf_op_params->ramrod_flags = 0;
+	rss.rss_flags = 0;
+	rss.ramrod_flags = 0;
 
 	if (rss_tlv->rss_flags & VFPF_RSS_MODE_DISABLED)
-		__set_bit(BNX2X_RSS_MODE_DISABLED, &vf_op_params->rss_flags);
+		__set_bit(BNX2X_RSS_MODE_DISABLED, &rss.rss_flags);
 	if (rss_tlv->rss_flags & VFPF_RSS_MODE_REGULAR)
-		__set_bit(BNX2X_RSS_MODE_REGULAR, &vf_op_params->rss_flags);
+		__set_bit(BNX2X_RSS_MODE_REGULAR, &rss.rss_flags);
 	if (rss_tlv->rss_flags & VFPF_RSS_SET_SRCH)
-		__set_bit(BNX2X_RSS_SET_SRCH, &vf_op_params->rss_flags);
+		__set_bit(BNX2X_RSS_SET_SRCH, &rss.rss_flags);
 	if (rss_tlv->rss_flags & VFPF_RSS_IPV4)
-		__set_bit(BNX2X_RSS_IPV4, &vf_op_params->rss_flags);
+		__set_bit(BNX2X_RSS_IPV4, &rss.rss_flags);
 	if (rss_tlv->rss_flags & VFPF_RSS_IPV4_TCP)
-		__set_bit(BNX2X_RSS_IPV4_TCP, &vf_op_params->rss_flags);
+		__set_bit(BNX2X_RSS_IPV4_TCP, &rss.rss_flags);
 	if (rss_tlv->rss_flags & VFPF_RSS_IPV4_UDP)
-		__set_bit(BNX2X_RSS_IPV4_UDP, &vf_op_params->rss_flags);
+		__set_bit(BNX2X_RSS_IPV4_UDP, &rss.rss_flags);
 	if (rss_tlv->rss_flags & VFPF_RSS_IPV6)
-		__set_bit(BNX2X_RSS_IPV6, &vf_op_params->rss_flags);
+		__set_bit(BNX2X_RSS_IPV6, &rss.rss_flags);
 	if (rss_tlv->rss_flags & VFPF_RSS_IPV6_TCP)
-		__set_bit(BNX2X_RSS_IPV6_TCP, &vf_op_params->rss_flags);
+		__set_bit(BNX2X_RSS_IPV6_TCP, &rss.rss_flags);
 	if (rss_tlv->rss_flags & VFPF_RSS_IPV6_UDP)
-		__set_bit(BNX2X_RSS_IPV6_UDP, &vf_op_params->rss_flags);
+		__set_bit(BNX2X_RSS_IPV6_UDP, &rss.rss_flags);
 
 	if ((!(rss_tlv->rss_flags & VFPF_RSS_IPV4_TCP) &&
 	     rss_tlv->rss_flags & VFPF_RSS_IPV4_UDP) ||
 	    (!(rss_tlv->rss_flags & VFPF_RSS_IPV6_TCP) &&
 	     rss_tlv->rss_flags & VFPF_RSS_IPV6_UDP)) {
 		BNX2X_ERR("about to hit a FW assert. aborting...\n");
-		vf->op_rc = -EINVAL;
+		rc = -EINVAL;
 		goto mbx_resp;
 	}
 
-	vf->op_rc = bnx2x_vfop_rss_cmd(bp, vf, &cmd);
-
+	rc = bnx2x_vf_rss_update(bp, vf, &rss);
 mbx_resp:
-	if (vf->op_rc)
-		bnx2x_vf_mbx_resp(bp, vf);
+	bnx2x_vf_mbx_resp(bp, vf, rc);
 }
 
 static int bnx2x_validate_tpa_params(struct bnx2x *bp,
@@ -1935,47 +1832,42 @@ static int bnx2x_validate_tpa_params(struct bnx2x *bp,
 static void bnx2x_vf_mbx_update_tpa(struct bnx2x *bp, struct bnx2x_virtf *vf,
 				    struct bnx2x_vf_mbx *mbx)
 {
-	struct bnx2x_vfop_cmd cmd = {
-		.done = bnx2x_vf_mbx_resp,
-		.block = false,
-	};
-	struct bnx2x_queue_update_tpa_params *vf_op_params =
-		&vf->op_params.qstate.params.update_tpa;
+	struct bnx2x_queue_update_tpa_params vf_op_params;
 	struct vfpf_tpa_tlv *tpa_tlv = &mbx->msg->req.update_tpa;
+	int rc = 0;
 
-	memset(vf_op_params, 0, sizeof(*vf_op_params));
+	memset(&vf_op_params, 0, sizeof(vf_op_params));
 
 	if (bnx2x_validate_tpa_params(bp, tpa_tlv))
 		goto mbx_resp;
 
-	vf_op_params->complete_on_both_clients =
+	vf_op_params.complete_on_both_clients =
 		tpa_tlv->tpa_client_info.complete_on_both_clients;
-	vf_op_params->dont_verify_thr =
+	vf_op_params.dont_verify_thr =
 		tpa_tlv->tpa_client_info.dont_verify_thr;
-	vf_op_params->max_agg_sz =
+	vf_op_params.max_agg_sz =
 		tpa_tlv->tpa_client_info.max_agg_size;
-	vf_op_params->max_sges_pkt =
+	vf_op_params.max_sges_pkt =
 		tpa_tlv->tpa_client_info.max_sges_for_packet;
-	vf_op_params->max_tpa_queues =
+	vf_op_params.max_tpa_queues =
 		tpa_tlv->tpa_client_info.max_tpa_queues;
-	vf_op_params->sge_buff_sz =
+	vf_op_params.sge_buff_sz =
 		tpa_tlv->tpa_client_info.sge_buff_size;
-	vf_op_params->sge_pause_thr_high =
+	vf_op_params.sge_pause_thr_high =
 		tpa_tlv->tpa_client_info.sge_pause_thr_high;
-	vf_op_params->sge_pause_thr_low =
+	vf_op_params.sge_pause_thr_low =
 		tpa_tlv->tpa_client_info.sge_pause_thr_low;
-	vf_op_params->tpa_mode =
+	vf_op_params.tpa_mode =
 		tpa_tlv->tpa_client_info.tpa_mode;
-	vf_op_params->update_ipv4 =
+	vf_op_params.update_ipv4 =
 		tpa_tlv->tpa_client_info.update_ipv4;
-	vf_op_params->update_ipv6 =
+	vf_op_params.update_ipv6 =
 		tpa_tlv->tpa_client_info.update_ipv6;
 
-	vf->op_rc = bnx2x_vfop_tpa_cmd(bp, vf, &cmd, tpa_tlv);
+	rc = bnx2x_vf_tpa_update(bp, vf, tpa_tlv, &vf_op_params);
 
 mbx_resp:
-	if (vf->op_rc)
-		bnx2x_vf_mbx_resp(bp, vf);
+	bnx2x_vf_mbx_resp(bp, vf, rc);
 }
 
 /* dispatch request */
@@ -2039,11 +1931,8 @@ static void bnx2x_vf_mbx_request(struct bnx2x *bp, struct bnx2x_virtf *vf,
 
 	/* can we respond to VF (do we have an address for it?) */
 	if (vf->state == VF_ACQUIRED || vf->state == VF_ENABLED) {
-		/* mbx_resp uses the op_rc of the VF */
-		vf->op_rc = PFVF_STATUS_NOT_SUPPORTED;
-
 		/* notify the VF that we do not support this request */
-		bnx2x_vf_mbx_resp(bp, vf);
+		bnx2x_vf_mbx_resp(bp, vf, PFVF_STATUS_NOT_SUPPORTED);
 	} else {
 		/* can't send a response since this VF is unknown to us
 		 * just ack the FW to release the mailbox and unlock
@@ -2123,7 +2012,7 @@ void bnx2x_vf_mbx(struct bnx2x *bp)
 		if (rc) {
 			BNX2X_ERR("Failed to copy request VF %d\n",
 				  vf->abs_vfid);
-			bnx2x_vf_release(bp, vf, false); /* non blocking */
+			bnx2x_vf_release(bp, vf);
 			return;
 		}
 
-- 
cgit v1.2.2


From d8361051000f27d2c9467c1f18985f9ce2123415 Mon Sep 17 00:00:00 2001
From: Yuval Mintz <Yuval.Mintz@qlogic.com>
Date: Sun, 23 Mar 2014 18:12:26 +0200
Subject: bnx2x: Don't show port statistics for VFs

VFs are currently showing port statistics, although they can't really access
those - thus all such statistics will always show a value of 0.

This patch removes said statistics from the VF's view as to not confuse the
user.

Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
index 38fc794c1655..b6de05e3149b 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
@@ -2969,8 +2969,9 @@ static void bnx2x_self_test(struct net_device *dev,
 #define IS_PORT_STAT(i) \
 	((bnx2x_stats_arr[i].flags & STATS_FLAGS_BOTH) == STATS_FLAGS_PORT)
 #define IS_FUNC_STAT(i)		(bnx2x_stats_arr[i].flags & STATS_FLAGS_FUNC)
-#define IS_MF_MODE_STAT(bp) \
-			(IS_MF(bp) && !(bp->msg_enable & BNX2X_MSG_STATS))
+#define HIDE_PORT_STAT(bp) \
+		((IS_MF(bp) && !(bp->msg_enable & BNX2X_MSG_STATS)) || \
+		 IS_VF(bp))
 
 /* ethtool statistics are displayed for all regular ethernet queues and the
  * fcoe L2 queue if not disabled
@@ -2992,7 +2993,7 @@ static int bnx2x_get_sset_count(struct net_device *dev, int stringset)
 				      BNX2X_NUM_Q_STATS;
 		} else
 			num_strings = 0;
-		if (IS_MF_MODE_STAT(bp)) {
+		if (HIDE_PORT_STAT(bp)) {
 			for (i = 0; i < BNX2X_NUM_STATS; i++)
 				if (IS_FUNC_STAT(i))
 					num_strings++;
@@ -3047,7 +3048,7 @@ static void bnx2x_get_strings(struct net_device *dev, u32 stringset, u8 *buf)
 		}
 
 		for (i = 0, j = 0; i < BNX2X_NUM_STATS; i++) {
-			if (IS_MF_MODE_STAT(bp) && IS_PORT_STAT(i))
+			if (HIDE_PORT_STAT(bp) && IS_PORT_STAT(i))
 				continue;
 			strcpy(buf + (k + j)*ETH_GSTRING_LEN,
 				   bnx2x_stats_arr[i].string);
@@ -3105,7 +3106,7 @@ static void bnx2x_get_ethtool_stats(struct net_device *dev,
 
 	hw_stats = (u32 *)&bp->eth_stats;
 	for (i = 0, j = 0; i < BNX2X_NUM_STATS; i++) {
-		if (IS_MF_MODE_STAT(bp) && IS_PORT_STAT(i))
+		if (HIDE_PORT_STAT(bp) && IS_PORT_STAT(i))
 			continue;
 		if (bnx2x_stats_arr[i].size == 0) {
 			/* skip this counter */
-- 
cgit v1.2.2


From 16bd41dda9c95c813f7e24b3b7300614a156b2d8 Mon Sep 17 00:00:00 2001
From: Yuval Mintz <Yuval.Mintz@qlogic.com>
Date: Sun, 23 Mar 2014 18:12:27 +0200
Subject: bnx2x: Don't allow VFs to become promiscuous

Currently, if a VF's Rx Mode will be configured to support promiscuous mode
the PF will comply, causing the VF to actually become promiscuous.
This will enable the VF to see all unicast traffic which might be intended for
other VMs, which we believe should not be possible.

This patch will cause the hypervisor to ignore the VF's request for changes in
its Rx mode (other than disabling it), preventing it from becoming promiscuous.

Reported-by: Yoann Juet <yoann.juet@univ-nantes.fr>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c | 42 ++++++------------------
 1 file changed, 10 insertions(+), 32 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c
index fe3737e56d08..0622884596b2 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c
@@ -896,29 +896,16 @@ int bnx2x_vfpf_storm_rx_mode(struct bnx2x *bp)
 
 	DP(NETIF_MSG_IFUP, "Rx mode is %d\n", mode);
 
-	switch (mode) {
-	case BNX2X_RX_MODE_NONE: /* no Rx */
+	/* Ignore everything accept MODE_NONE */
+	if (mode  == BNX2X_RX_MODE_NONE) {
 		req->rx_mask = VFPF_RX_MASK_ACCEPT_NONE;
-		break;
-	case BNX2X_RX_MODE_NORMAL:
+	} else {
+		/* Current PF driver will not look at the specific flags,
+		 * but they are required when working with older drivers on hv.
+		 */
 		req->rx_mask = VFPF_RX_MASK_ACCEPT_MATCHED_MULTICAST;
 		req->rx_mask |= VFPF_RX_MASK_ACCEPT_MATCHED_UNICAST;
 		req->rx_mask |= VFPF_RX_MASK_ACCEPT_BROADCAST;
-		break;
-	case BNX2X_RX_MODE_ALLMULTI:
-		req->rx_mask = VFPF_RX_MASK_ACCEPT_ALL_MULTICAST;
-		req->rx_mask |= VFPF_RX_MASK_ACCEPT_MATCHED_UNICAST;
-		req->rx_mask |= VFPF_RX_MASK_ACCEPT_BROADCAST;
-		break;
-	case BNX2X_RX_MODE_PROMISC:
-		req->rx_mask = VFPF_RX_MASK_ACCEPT_ALL_UNICAST;
-		req->rx_mask |= VFPF_RX_MASK_ACCEPT_ALL_MULTICAST;
-		req->rx_mask |= VFPF_RX_MASK_ACCEPT_BROADCAST;
-		break;
-	default:
-		BNX2X_ERR("BAD rx mode (%d)\n", mode);
-		rc = -EINVAL;
-		goto out;
 	}
 
 	req->flags |= VFPF_SET_Q_FILTERS_RX_MASK_CHANGED;
@@ -939,7 +926,7 @@ int bnx2x_vfpf_storm_rx_mode(struct bnx2x *bp)
 		BNX2X_ERR("Set Rx mode failed: %d\n", resp->hdr.status);
 		rc = -EINVAL;
 	}
-out:
+
 	bnx2x_vfpf_finalize(bp, &req->first_tlv);
 
 	return rc;
@@ -1571,21 +1558,12 @@ static int bnx2x_vf_mbx_qfilters(struct bnx2x *bp, struct bnx2x_virtf *vf)
 		struct pf_vf_bulletin_content *bulletin =
 					BP_VF_BULLETIN(bp, vf->index);
 
-		/* covert VF-PF if mask to bnx2x accept flags */
-		if (msg->rx_mask & VFPF_RX_MASK_ACCEPT_MATCHED_UNICAST)
+		/* Ignore VF requested mode; instead set a regular mode */
+		if (msg->rx_mask !=  VFPF_RX_MASK_ACCEPT_NONE) {
 			__set_bit(BNX2X_ACCEPT_UNICAST, &accept);
-
-		if (msg->rx_mask & VFPF_RX_MASK_ACCEPT_MATCHED_MULTICAST)
 			__set_bit(BNX2X_ACCEPT_MULTICAST, &accept);
-
-		if (msg->rx_mask & VFPF_RX_MASK_ACCEPT_ALL_UNICAST)
-			__set_bit(BNX2X_ACCEPT_ALL_UNICAST, &accept);
-
-		if (msg->rx_mask & VFPF_RX_MASK_ACCEPT_ALL_MULTICAST)
-			__set_bit(BNX2X_ACCEPT_ALL_MULTICAST, &accept);
-
-		if (msg->rx_mask & VFPF_RX_MASK_ACCEPT_BROADCAST)
 			__set_bit(BNX2X_ACCEPT_BROADCAST, &accept);
+		}
 
 		/* A packet arriving the vf's mac should be accepted
 		 * with any vlan, unless a vlan has already been
-- 
cgit v1.2.2


From 1e87af97e63d7e4bf6b9d2d6383a8c1c689afcb1 Mon Sep 17 00:00:00 2001
From: Fabio Estevam <fabio.estevam@freescale.com>
Date: Mon, 24 Mar 2014 12:57:25 -0300
Subject: smsc911x: Do not use netdev_dbg() when device is not registered

With debug enabled we get the following message:

smsc911x smsc911x (unregistered net_device): couldn't get clock -2

As the device has not been registered at this point, it is better to use
dev_dbg() instead of netdev_dbg().

CC: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Suggested-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/smsc/smsc911x.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c
index ed36ff48af57..13b21b8855f1 100644
--- a/drivers/net/ethernet/smsc/smsc911x.c
+++ b/drivers/net/ethernet/smsc/smsc911x.c
@@ -439,7 +439,8 @@ static int smsc911x_request_resources(struct platform_device *pdev)
 	/* Request clock */
 	pdata->clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(pdata->clk))
-		netdev_dbg(ndev, "couldn't get clock %li\n", PTR_ERR(pdata->clk));
+		dev_dbg(&pdev->dev, "couldn't get clock %li\n",
+			PTR_ERR(pdata->clk));
 
 	return ret;
 }
-- 
cgit v1.2.2


From f845b335f151a0b4f44827b519150e9e2982bd0d Mon Sep 17 00:00:00 2001
From: Fabio Estevam <fabio.estevam@freescale.com>
Date: Mon, 24 Mar 2014 12:57:26 -0300
Subject: smsc911x: No need to print driver version

Having the kernel to print:

"smsc911x: Driver version 2008-10-21" on every boot is not very useful, so
remove the print of the driver version.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/smsc/smsc911x.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c
index 13b21b8855f1..a0fc151da40d 100644
--- a/drivers/net/ethernet/smsc/smsc911x.c
+++ b/drivers/net/ethernet/smsc/smsc911x.c
@@ -2380,8 +2380,6 @@ static int smsc911x_drv_probe(struct platform_device *pdev)
 	int res_size, irq_flags;
 	int retval;
 
-	pr_info("Driver version %s\n", SMSC_DRV_VERSION);
-
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
 					   "smsc911x-memory");
 	if (!res)
-- 
cgit v1.2.2


From 12f2a47945946731bd2f4a64e4720daaabc95106 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Mon, 24 Mar 2014 10:45:12 -0700
Subject: chelsio: Remove addressof casts to same type

Using addressof then casting to the original type is pointless,
so remove these unnecessary casts.

Done via coccinelle script:

$ cat typecast.cocci
@@
type T;
T foo;
@@

-	(T *)&foo
+	&foo

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index cc04d090354c..a7a41e0f3b01 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -3220,8 +3220,8 @@ static int cxgb4_clip_get(const struct net_device *dev,
 	c.op_to_write = htonl(FW_CMD_OP(FW_CLIP_CMD) |
 			FW_CMD_REQUEST | FW_CMD_WRITE);
 	c.alloc_to_len16 = htonl(F_FW_CLIP_CMD_ALLOC | FW_LEN16(c));
-	*(__be64 *)&c.ip_hi = *(__be64 *)(lip->s6_addr);
-	*(__be64 *)&c.ip_lo = *(__be64 *)(lip->s6_addr + 8);
+	c.ip_hi = *(__be64 *)(lip->s6_addr);
+	c.ip_lo = *(__be64 *)(lip->s6_addr + 8);
 	return t4_wr_mbox_meat(adap, adap->mbox, &c, sizeof(c), &c, false);
 }
 
@@ -3236,8 +3236,8 @@ static int cxgb4_clip_release(const struct net_device *dev,
 	c.op_to_write = htonl(FW_CMD_OP(FW_CLIP_CMD) |
 			FW_CMD_REQUEST | FW_CMD_READ);
 	c.alloc_to_len16 = htonl(F_FW_CLIP_CMD_FREE | FW_LEN16(c));
-	*(__be64 *)&c.ip_hi = *(__be64 *)(lip->s6_addr);
-	*(__be64 *)&c.ip_lo = *(__be64 *)(lip->s6_addr + 8);
+	c.ip_hi = *(__be64 *)(lip->s6_addr);
+	c.ip_lo = *(__be64 *)(lip->s6_addr + 8);
 	return t4_wr_mbox_meat(adap, adap->mbox, &c, sizeof(c), &c, false);
 }
 
-- 
cgit v1.2.2


From 41ced615e5782582789b6a0cbafe3a0603f9beb0 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Mon, 24 Mar 2014 13:15:34 -0700
Subject: altera: Remove casts of pointer to same type

Casting a pointer to a pointer of the same type is pointless,
so remove these unnecessary casts.

Done via coccinelle script:

$ cat typecast_2.cocci
@@
type T;
T *foo;
@@

-	(T *)foo
+	foo

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Vince Bridgers <vbridgers2013@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/altera/altera_tse_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/altera/altera_tse_main.c b/drivers/net/ethernet/altera/altera_tse_main.c
index 6006ef275107..c70a29e0b9f7 100644
--- a/drivers/net/ethernet/altera/altera_tse_main.c
+++ b/drivers/net/ethernet/altera/altera_tse_main.c
@@ -933,7 +933,7 @@ static int tse_change_mtu(struct net_device *dev, int new_mtu)
 static void altera_tse_set_mcfilter(struct net_device *dev)
 {
 	struct altera_tse_private *priv = netdev_priv(dev);
-	struct altera_tse_mac *mac = (struct altera_tse_mac *)priv->mac_dev;
+	struct altera_tse_mac *mac = priv->mac_dev;
 	int i;
 	struct netdev_hw_addr *ha;
 
@@ -963,7 +963,7 @@ static void altera_tse_set_mcfilter(struct net_device *dev)
 static void altera_tse_set_mcfilterall(struct net_device *dev)
 {
 	struct altera_tse_private *priv = netdev_priv(dev);
-	struct altera_tse_mac *mac = (struct altera_tse_mac *)priv->mac_dev;
+	struct altera_tse_mac *mac = priv->mac_dev;
 	int i;
 
 	/* set the hash filter */
-- 
cgit v1.2.2


From 60f40107ab7d722810fd8aa3f52590752a0a3acf Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Mon, 24 Mar 2014 13:15:35 -0700
Subject: alx: Remove casts of pointer to same type

Casting a pointer to a pointer of the same type is pointless,
so remove these unnecessary casts.

Done via coccinelle script:

$ cat typecast_2.cocci
@@
type T;
T *foo;
@@

-	(T *)foo
+	foo

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/atheros/alx/main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/atheros/alx/main.c b/drivers/net/ethernet/atheros/alx/main.c
index 96f3edb6c738..17bb9ce96260 100644
--- a/drivers/net/ethernet/atheros/alx/main.c
+++ b/drivers/net/ethernet/atheros/alx/main.c
@@ -535,7 +535,7 @@ static int alx_alloc_descriptors(struct alx_priv *alx)
 	if (!alx->descmem.virt)
 		goto out_free;
 
-	alx->txq.tpd = (void *)alx->descmem.virt;
+	alx->txq.tpd = alx->descmem.virt;
 	alx->txq.tpd_dma = alx->descmem.dma;
 
 	/* alignment requirement for next block */
-- 
cgit v1.2.2


From 4e2e865d959e095ab8f1a112e7952c9baa173d0a Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Mon, 24 Mar 2014 13:15:37 -0700
Subject: qlcnic: Remove casts of pointer to same type

Casting a pointer to a pointer of the same type is pointless,
so remove these unnecessary casts.

Done via coccinelle script:

$ cat typecast_2.cocci
@@
type T;
T *foo;
@@

-	(T *)foo
+	foo

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
index ec399b7f5bd7..2d91975d21f7 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
@@ -1388,7 +1388,7 @@ static int qlcnic_83xx_copy_fw_file(struct qlcnic_adapter *adapter)
 	addr = (u64)dest;
 
 	ret = qlcnic_83xx_ms_mem_write128(adapter, addr,
-					  (u32 *)p_cache, size / 16);
+					  p_cache, size / 16);
 	if (ret) {
 		dev_err(&adapter->pdev->dev, "MS memory write failed\n");
 		release_firmware(fw);
-- 
cgit v1.2.2


From a3622f2c824135a7ce235a61bf9ff5688e8f576b Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Mon, 24 Mar 2014 16:36:47 -0700
Subject: net: phy: bcm7xxx: define constants for our registers

Define constants for the various registers used in
bcm7xxx_28nm_afe_config_init() to help clarify what this workaround is
about.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/bcm7xxx.c | 38 +++++++++++++++++++++++++++-----------
 1 file changed, 27 insertions(+), 11 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c
index 697337220016..314194179168 100644
--- a/drivers/net/phy/bcm7xxx.c
+++ b/drivers/net/phy/bcm7xxx.c
@@ -28,6 +28,22 @@
 #define MII_BCM7XXX_TEST		0x1f
 #define  MII_BCM7XXX_SHD_MODE_2		BIT(2)
 
+/* 28nm only register definitions */
+#define MISC_ADDR(base, channel)	base, channel
+
+#define DSP_TAP10			MISC_ADDR(0x0a, 0)
+#define PLL_PLLCTRL_1			MISC_ADDR(0x32, 1)
+#define PLL_PLLCTRL_2			MISC_ADDR(0x32, 2)
+#define PLL_PLLCTRL_4			MISC_ADDR(0x33, 0)
+
+#define AFE_RXCONFIG_0			MISC_ADDR(0x38, 0)
+#define AFE_RXCONFIG_1			MISC_ADDR(0x38, 1)
+#define AFE_RX_LP_COUNTER		MISC_ADDR(0x38, 3)
+#define AFE_TX_CONFIG			MISC_ADDR(0x39, 0)
+#define AFE_HPF_TRIM_OTHERS		MISC_ADDR(0x3a, 0)
+
+#define CORE_EXPB0			0xb0
+
 static int bcm7445_config_init(struct phy_device *phydev)
 {
 	int ret;
@@ -88,44 +104,44 @@ static void phy_write_misc(struct phy_device *phydev,
 static int bcm7xxx_28nm_afe_config_init(struct phy_device *phydev)
 {
 	/* write AFE_RXCONFIG_0 */
-	phy_write_misc(phydev, 0x38, 0x0000, 0xeb19);
+	phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb19);
 
 	/* write AFE_RXCONFIG_1 */
-	phy_write_misc(phydev, 0x38, 0x0001, 0x9a3f);
+	phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9a3f);
 
 	/* write AFE_RX_LP_COUNTER */
-	phy_write_misc(phydev, 0x38, 0x0003, 0x7fc7);
+	phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc7);
 
 	/* write AFE_HPF_TRIM_OTHERS */
-	phy_write_misc(phydev, 0x3A, 0x0000, 0x000b);
+	phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x000b);
 
 	/* write AFTE_TX_CONFIG */
-	phy_write_misc(phydev, 0x39, 0x0000, 0x0800);
+	phy_write_misc(phydev, AFE_TX_CONFIG, 0x0800);
 
 	/* Increase VCO range to prevent unlocking problem of PLL at low
 	 * temp
 	 */
-	phy_write_misc(phydev, 0x0032, 0x0001, 0x0048);
+	phy_write_misc(phydev, PLL_PLLCTRL_1, 0x0048);
 
 	/* Change Ki to 011 */
-	phy_write_misc(phydev, 0x0032, 0x0002, 0x021b);
+	phy_write_misc(phydev, PLL_PLLCTRL_2, 0x021b);
 
 	/* Disable loading of TVCO buffer to bandgap, set bandgap trim
 	 * to 111
 	 */
-	phy_write_misc(phydev, 0x0033, 0x0000, 0x0e20);
+	phy_write_misc(phydev, PLL_PLLCTRL_4, 0x0e20);
 
 	/* Adjust bias current trim by -3 */
-	phy_write_misc(phydev, 0x000a, 0x0000, 0x690b);
+	phy_write_misc(phydev, DSP_TAP10, 0x690b);
 
 	/* Switch to CORE_BASE1E */
 	phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0xd);
 
 	/* Reset R_CAL/RC_CAL Engine */
-	phy_write_exp(phydev, 0x00b0, 0x0010);
+	phy_write_exp(phydev, CORE_EXPB0, 0x0010);
 
 	/* Disable Reset R_CAL/RC_CAL Engine */
-	phy_write_exp(phydev, 0x00b0, 0x0000);
+	phy_write_exp(phydev, CORE_EXPB0, 0x0000);
 
 	return 0;
 }
-- 
cgit v1.2.2


From 9918542e2d02f259f909a956e41bd6d5827fa422 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Mon, 24 Mar 2014 16:36:48 -0700
Subject: net: phy: bcm7xxx: fix spurious MDIO failures during workaround

Writing first to the AFE registers, and then the VCO, RCAL, RC_CAL
registers turned out to unveil some spurious MDIO read/write failures
which would make the workaround partially applied. The fix is to write
first to the VCO, RCAL, RC_CAL registers, and then write to the AFE
registers.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/bcm7xxx.c | 30 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 15 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c
index 314194179168..5991168bcbef 100644
--- a/drivers/net/phy/bcm7xxx.c
+++ b/drivers/net/phy/bcm7xxx.c
@@ -103,21 +103,6 @@ static void phy_write_misc(struct phy_device *phydev,
 
 static int bcm7xxx_28nm_afe_config_init(struct phy_device *phydev)
 {
-	/* write AFE_RXCONFIG_0 */
-	phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb19);
-
-	/* write AFE_RXCONFIG_1 */
-	phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9a3f);
-
-	/* write AFE_RX_LP_COUNTER */
-	phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc7);
-
-	/* write AFE_HPF_TRIM_OTHERS */
-	phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x000b);
-
-	/* write AFTE_TX_CONFIG */
-	phy_write_misc(phydev, AFE_TX_CONFIG, 0x0800);
-
 	/* Increase VCO range to prevent unlocking problem of PLL at low
 	 * temp
 	 */
@@ -143,6 +128,21 @@ static int bcm7xxx_28nm_afe_config_init(struct phy_device *phydev)
 	/* Disable Reset R_CAL/RC_CAL Engine */
 	phy_write_exp(phydev, CORE_EXPB0, 0x0000);
 
+	/* write AFE_RXCONFIG_0 */
+	phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb19);
+
+	/* write AFE_RXCONFIG_1 */
+	phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9a3f);
+
+	/* write AFE_RX_LP_COUNTER */
+	phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc7);
+
+	/* write AFE_HPF_TRIM_OTHERS */
+	phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x000b);
+
+	/* write AFTE_TX_CONFIG */
+	phy_write_misc(phydev, AFE_TX_CONFIG, 0x0800);
+
 	return 0;
 }
 
-- 
cgit v1.2.2


From a62ea5a75fdd4c0052bdbacd1e653b00a9f88f6d Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Mon, 24 Mar 2014 16:36:49 -0700
Subject: net: phy: bcm7xxx: properly clear AFE_RX_LP_COUNTER

The AFE_RX_LP_COUNTER kept the last 3 bits set, which would not properly
clear the EEE LPI mode errors bits. Make sure that those bits are set to
0 to ensure the PHY timing is always good even during EEE wake-up.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/bcm7xxx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c
index 5991168bcbef..526b94cea569 100644
--- a/drivers/net/phy/bcm7xxx.c
+++ b/drivers/net/phy/bcm7xxx.c
@@ -135,7 +135,7 @@ static int bcm7xxx_28nm_afe_config_init(struct phy_device *phydev)
 	phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9a3f);
 
 	/* write AFE_RX_LP_COUNTER */
-	phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc7);
+	phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc0);
 
 	/* write AFE_HPF_TRIM_OTHERS */
 	phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x000b);
-- 
cgit v1.2.2


From 869b9b19b3affd81cee853d33c0b124797f3c387 Mon Sep 17 00:00:00 2001
From: Zoltan Kiss <zoltan.kiss@citrix.com>
Date: Mon, 24 Mar 2014 23:59:49 +0000
Subject: xen-netback: Stop using xenvif_tx_pending_slots_available

Since the early days TX stops if there isn't enough free pending slots to
consume a maximum sized (slot-wise) packet. Probably the reason for that is to
avoid the case when we don't have enough free pending slot in the ring to finish
the packet. But if we make sure that the pending ring has the same size as the
shared ring, that shouldn't really happen. The frontend can only post packets
which fit the to the free space of the shared ring. If it doesn't, the frontend
has to stop, as it can only increase the req_prod when the whole packet fits
onto the ring.
This patch avoid using this checking, makes sure the 2 ring has the same size,
and remove a checking from the callback. As now we don't stop the NAPI instance
on this condition, we don't have to wake it up if we free pending slots up.

Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/xen-netback/common.h    |  8 +-------
 drivers/net/xen-netback/interface.c |  3 +--
 drivers/net/xen-netback/netback.c   | 13 ++-----------
 3 files changed, 4 insertions(+), 20 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/xen-netback/common.h b/drivers/net/xen-netback/common.h
index 0355f8767e3b..89b2d429c440 100644
--- a/drivers/net/xen-netback/common.h
+++ b/drivers/net/xen-netback/common.h
@@ -81,7 +81,7 @@ struct xenvif_rx_meta {
 
 #define MAX_BUFFER_OFFSET PAGE_SIZE
 
-#define MAX_PENDING_REQS 256
+#define MAX_PENDING_REQS XEN_NETIF_TX_RING_SIZE
 
 /* It's possible for an skb to have a maximal number of frags
  * but still be less than MAX_BUFFER_OFFSET in size. Thus the
@@ -251,12 +251,6 @@ static inline pending_ring_idx_t nr_pending_reqs(struct xenvif *vif)
 		vif->pending_prod + vif->pending_cons;
 }
 
-static inline bool xenvif_tx_pending_slots_available(struct xenvif *vif)
-{
-	return nr_pending_reqs(vif) + XEN_NETBK_LEGACY_SLOTS_MAX
-		< MAX_PENDING_REQS;
-}
-
 /* Callback from stack when TX packet can be released */
 void xenvif_zerocopy_callback(struct ubuf_info *ubuf, bool zerocopy_success);
 
diff --git a/drivers/net/xen-netback/interface.c b/drivers/net/xen-netback/interface.c
index 23bb2f4b18fe..e71fb1ac5c4d 100644
--- a/drivers/net/xen-netback/interface.c
+++ b/drivers/net/xen-netback/interface.c
@@ -88,8 +88,7 @@ static int xenvif_poll(struct napi_struct *napi, int budget)
 		local_irq_save(flags);
 
 		RING_FINAL_CHECK_FOR_REQUESTS(&vif->tx, more_to_do);
-		if (!(more_to_do &&
-		      xenvif_tx_pending_slots_available(vif)))
+		if (!more_to_do)
 			__napi_complete(napi);
 
 		local_irq_restore(flags);
diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c
index 1e4628724778..5d2dd1d54173 100644
--- a/drivers/net/xen-netback/netback.c
+++ b/drivers/net/xen-netback/netback.c
@@ -1167,8 +1167,7 @@ static unsigned xenvif_tx_build_gops(struct xenvif *vif, int budget)
 	struct sk_buff *skb;
 	int ret;
 
-	while (xenvif_tx_pending_slots_available(vif) &&
-	       (skb_queue_len(&vif->tx_queue) < budget)) {
+	while (skb_queue_len(&vif->tx_queue) < budget) {
 		struct xen_netif_tx_request txreq;
 		struct xen_netif_tx_request txfrags[XEN_NETBK_LEGACY_SLOTS_MAX];
 		struct xen_netif_extra_info extras[XEN_NETIF_EXTRA_TYPE_MAX-1];
@@ -1508,13 +1507,6 @@ void xenvif_zerocopy_callback(struct ubuf_info *ubuf, bool zerocopy_success)
 	wake_up(&vif->dealloc_wq);
 	spin_unlock_irqrestore(&vif->callback_lock, flags);
 
-	if (RING_HAS_UNCONSUMED_REQUESTS(&vif->tx) &&
-	    xenvif_tx_pending_slots_available(vif)) {
-		local_bh_disable();
-		napi_schedule(&vif->napi);
-		local_bh_enable();
-	}
-
 	if (likely(zerocopy_success))
 		vif->tx_zerocopy_success++;
 	else
@@ -1706,8 +1698,7 @@ static inline int rx_work_todo(struct xenvif *vif)
 static inline int tx_work_todo(struct xenvif *vif)
 {
 
-	if (likely(RING_HAS_UNCONSUMED_REQUESTS(&vif->tx)) &&
-	    xenvif_tx_pending_slots_available(vif))
+	if (likely(RING_HAS_UNCONSUMED_REQUESTS(&vif->tx)))
 		return 1;
 
 	return 0;
-- 
cgit v1.2.2


From 0e59a4a553df312b5308c75085f7f02b12680d12 Mon Sep 17 00:00:00 2001
From: Zoltan Kiss <zoltan.kiss@citrix.com>
Date: Mon, 24 Mar 2014 23:59:50 +0000
Subject: xen-netback: Non-functional follow-up patch for grant mapping series

Ian made some late comments about the grant mapping series, I incorporated the
non-functional outcomes into this patch:

- typo fixes in a comment of xenvif_free(), and add another one there as well
- typo fix for comment of rx_drain_timeout_msecs
- remove stale comment before calling xenvif_grant_handle_reset()

Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/xen-netback/interface.c | 13 ++++++++++---
 drivers/net/xen-netback/netback.c   |  4 +---
 2 files changed, 11 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/xen-netback/interface.c b/drivers/net/xen-netback/interface.c
index e71fb1ac5c4d..cdc298e3b747 100644
--- a/drivers/net/xen-netback/interface.c
+++ b/drivers/net/xen-netback/interface.c
@@ -574,15 +574,15 @@ void xenvif_disconnect(struct xenvif *vif)
 void xenvif_free(struct xenvif *vif)
 {
 	int i, unmap_timeout = 0;
-	/* Here we want to avoid timeout messages if an skb can be legitimatly
-	 * stucked somewhere else. Realisticly this could be an another vif's
+	/* Here we want to avoid timeout messages if an skb can be legitimately
+	 * stuck somewhere else. Realistically this could be an another vif's
 	 * internal or QDisc queue. That another vif also has this
 	 * rx_drain_timeout_msecs timeout, but the timer only ditches the
 	 * internal queue. After that, the QDisc queue can put in worst case
 	 * XEN_NETIF_RX_RING_SIZE / MAX_SKB_FRAGS skbs into that another vif's
 	 * internal queue, so we need several rounds of such timeouts until we
 	 * can be sure that no another vif should have skb's from us. We are
-	 * not sending more skb's, so newly stucked packets are not interesting
+	 * not sending more skb's, so newly stuck packets are not interesting
 	 * for us here.
 	 */
 	unsigned int worst_case_skb_lifetime = (rx_drain_timeout_msecs/1000) *
@@ -597,6 +597,13 @@ void xenvif_free(struct xenvif *vif)
 				netdev_err(vif->dev,
 					   "Page still granted! Index: %x\n",
 					   i);
+			/* If there are still unmapped pages, reset the loop to
+			 * start checking again. We shouldn't exit here until
+			 * dealloc thread and NAPI instance release all the
+			 * pages. If a kernel bug causes the skbs to stall
+			 * somewhere, the interface cannot be brought down
+			 * properly.
+			 */
 			i = -1;
 		}
 	}
diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c
index 5d2dd1d54173..d3172fe0306f 100644
--- a/drivers/net/xen-netback/netback.c
+++ b/drivers/net/xen-netback/netback.c
@@ -56,7 +56,7 @@ bool separate_tx_rx_irq = 1;
 module_param(separate_tx_rx_irq, bool, 0644);
 
 /* When guest ring is filled up, qdisc queues the packets for us, but we have
- * to timeout them, otherwise other guests' packets can get stucked there
+ * to timeout them, otherwise other guests' packets can get stuck there
  */
 unsigned int rx_drain_timeout_msecs = 10000;
 module_param(rx_drain_timeout_msecs, uint, 0444);
@@ -1545,7 +1545,6 @@ static inline void xenvif_tx_dealloc_action(struct xenvif *vif)
 					    idx_to_kaddr(vif, pending_idx),
 					    GNTMAP_host_map,
 					    vif->grant_tx_handle[pending_idx]);
-			/* Btw. already unmapped? */
 			xenvif_grant_handle_reset(vif, pending_idx);
 			++gop;
 		}
@@ -1678,7 +1677,6 @@ void xenvif_idx_unmap(struct xenvif *vif, u16 pending_idx)
 			    idx_to_kaddr(vif, pending_idx),
 			    GNTMAP_host_map,
 			    vif->grant_tx_handle[pending_idx]);
-	/* Btw. already unmapped? */
 	xenvif_grant_handle_reset(vif, pending_idx);
 
 	ret = gnttab_unmap_refs(&tx_unmap_op, NULL,
-- 
cgit v1.2.2


From 7aceb47a9df3383b24824c3e4bd4f029e4598fda Mon Sep 17 00:00:00 2001
From: Zoltan Kiss <zoltan.kiss@citrix.com>
Date: Mon, 24 Mar 2014 23:59:51 +0000
Subject: xen-netback: Functional follow-up patch for grant mapping series

Ian made some late comments about the grant mapping series, I incorporated the
functional outcomes into this patch:

- use callback_param macro to shorten access to pending_tx_info in
  xenvif_fill_frags() and xenvif_tx_submit()
- print an error message in xenvif_idx_unmap() before panic

Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/xen-netback/netback.c | 26 +++++++++++++++++++-------
 1 file changed, 19 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c
index d3172fe0306f..cb784fe5220c 100644
--- a/drivers/net/xen-netback/netback.c
+++ b/drivers/net/xen-netback/netback.c
@@ -99,6 +99,9 @@ static inline unsigned long idx_to_kaddr(struct xenvif *vif,
 	return (unsigned long)pfn_to_kaddr(idx_to_pfn(vif, idx));
 }
 
+#define callback_param(vif, pending_idx) \
+	(vif->pending_tx_info[pending_idx].callback_struct)
+
 /* Find the containing VIF's structure from a pointer in pending_tx_info array
  */
 static inline struct xenvif* ubuf_to_vif(struct ubuf_info *ubuf)
@@ -1020,12 +1023,12 @@ static void xenvif_fill_frags(struct xenvif *vif, struct sk_buff *skb)
 		/* If this is not the first frag, chain it to the previous*/
 		if (unlikely(prev_pending_idx == INVALID_PENDING_IDX))
 			skb_shinfo(skb)->destructor_arg =
-				&vif->pending_tx_info[pending_idx].callback_struct;
+				&callback_param(vif, pending_idx);
 		else if (likely(pending_idx != prev_pending_idx))
-			vif->pending_tx_info[prev_pending_idx].callback_struct.ctx =
-				&(vif->pending_tx_info[pending_idx].callback_struct);
+			callback_param(vif, prev_pending_idx).ctx =
+				&callback_param(vif, pending_idx);
 
-		vif->pending_tx_info[pending_idx].callback_struct.ctx = NULL;
+		callback_param(vif, pending_idx).ctx = NULL;
 		prev_pending_idx = pending_idx;
 
 		txp = &vif->pending_tx_info[pending_idx].req;
@@ -1395,13 +1398,13 @@ static int xenvif_tx_submit(struct xenvif *vif)
 		memcpy(skb->data,
 		       (void *)(idx_to_kaddr(vif, pending_idx)|txp->offset),
 		       data_len);
-		vif->pending_tx_info[pending_idx].callback_struct.ctx = NULL;
+		callback_param(vif, pending_idx).ctx = NULL;
 		if (data_len < txp->size) {
 			/* Append the packet payload as a fragment. */
 			txp->offset += data_len;
 			txp->size -= data_len;
 			skb_shinfo(skb)->destructor_arg =
-				&vif->pending_tx_info[pending_idx].callback_struct;
+				&callback_param(vif, pending_idx);
 		} else {
 			/* Schedule a response immediately. */
 			xenvif_idx_unmap(vif, pending_idx);
@@ -1681,7 +1684,16 @@ void xenvif_idx_unmap(struct xenvif *vif, u16 pending_idx)
 
 	ret = gnttab_unmap_refs(&tx_unmap_op, NULL,
 				&vif->mmap_pages[pending_idx], 1);
-	BUG_ON(ret);
+	if (ret) {
+		netdev_err(vif->dev,
+			   "Unmap fail: ret: %d pending_idx: %d host_addr: %llx handle: %x status: %d\n",
+			   ret,
+			   pending_idx,
+			   tx_unmap_op.host_addr,
+			   tx_unmap_op.handle,
+			   tx_unmap_op.status);
+		BUG();
+	}
 
 	xenvif_idx_release(vif, pending_idx, XEN_NETIF_RSP_OKAY);
 }
-- 
cgit v1.2.2


From 054bb8801038c93c42cb6cde75141aa396afd065 Mon Sep 17 00:00:00 2001
From: dingtianhong <dingtianhong@huawei.com>
Date: Tue, 25 Mar 2014 17:00:09 +0800
Subject: bonding: slight optimization for bond xmit path

Add unlikely() micro to the unlikely conditions in the bond
xmit path for slight optimization.

Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_main.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index e717db301d46..ee17c246326e 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -2957,7 +2957,7 @@ static bool bond_flow_dissect(struct bonding *bond, struct sk_buff *skb,
 	fk->ports = 0;
 	noff = skb_network_offset(skb);
 	if (skb->protocol == htons(ETH_P_IP)) {
-		if (!pskb_may_pull(skb, noff + sizeof(*iph)))
+		if (unlikely(!pskb_may_pull(skb, noff + sizeof(*iph))))
 			return false;
 		iph = ip_hdr(skb);
 		fk->src = iph->saddr;
@@ -2966,7 +2966,7 @@ static bool bond_flow_dissect(struct bonding *bond, struct sk_buff *skb,
 		if (!ip_is_fragment(iph))
 			proto = iph->protocol;
 	} else if (skb->protocol == htons(ETH_P_IPV6)) {
-		if (!pskb_may_pull(skb, noff + sizeof(*iph6)))
+		if (unlikely(!pskb_may_pull(skb, noff + sizeof(*iph6))))
 			return false;
 		iph6 = ipv6_hdr(skb);
 		fk->src = (__force __be32)ipv6_addr_hash(&iph6->saddr);
@@ -3768,7 +3768,7 @@ static netdev_tx_t bond_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	 * If we risk deadlock from transmitting this in the
 	 * netpoll path, tell netpoll to queue the frame for later tx
 	 */
-	if (is_netpoll_tx_blocked(dev))
+	if (unlikely(is_netpoll_tx_blocked(dev)))
 		return NETDEV_TX_BUSY;
 
 	rcu_read_lock();
-- 
cgit v1.2.2


From 9152e26df20b9e5ffdbe0d5b96d0e9ff8b33ff31 Mon Sep 17 00:00:00 2001
From: dingtianhong <dingtianhong@huawei.com>
Date: Tue, 25 Mar 2014 17:00:10 +0800
Subject: bonding: ratelimit pr_err() for bond xmit broadcast

It may spam if the system is out of the memory, add ratelimit for it.

Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index ee17c246326e..cbadd6dccb2b 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -3656,8 +3656,8 @@ static int bond_xmit_broadcast(struct sk_buff *skb, struct net_device *bond_dev)
 			struct sk_buff *skb2 = skb_clone(skb, GFP_ATOMIC);
 
 			if (!skb2) {
-				pr_err("%s: Error: bond_xmit_broadcast(): skb_clone() failed\n",
-				       bond_dev->name);
+				net_err_ratelimited("%s: Error: %s: skb_clone() failed\n",
+						    bond_dev->name, __func__);
 				continue;
 			}
 			/* bond_dev_queue_xmit always returns 0 */
-- 
cgit v1.2.2


From fbd929f2dce460456807a51e18d623db3db9f077 Mon Sep 17 00:00:00 2001
From: dingtianhong <dingtianhong@huawei.com>
Date: Tue, 25 Mar 2014 17:44:43 +0800
Subject: bonding: support QinQ for bond arp interval

The bond send arp request to indicate that the slave is active, and if the bond dev
is a vlan dev, it will set the vlan tag in skb to notice the vlan group, but the
bond could only send a skb with 802.1q proto, not support for QinQ.

So add outer tag for lower vlan tag and inner tag for upper vlan tag to support QinQ,
The new skb will be consist of two vlan tag just like this:

dst mac | src mac | outer vlan tag | inner vlan tag | data | .....

If We don't need QinQ, the inner vlan tag could be set to 0 and use outer vlan tag
 as a normal vlan group.

Using "ip link" to configure the bond for QinQ and add test log:

ip link add link bond0  bond0.20 type vlan proto 802.1ad id 20
ip link add link bond0.20  bond0.20.200 type vlan proto 802.1q id 200

ifconfig bond0.20 11.11.20.36/24
ifconfig bond0.20.200 11.11.200.36/24

echo +11.11.200.37 > /sys/class/net/bond0/bonding/arp_ip_target

90:e2:ba:07:4a:5c (oui Unknown) > Broadcast, ethertype 802.1Q-QinQ (0x88a8),length 50: vlan 20, p 0,ethertype 802.1Q, vlan 200, p 0, ethertype ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 11.11.200.37 tell 11.11.200.36, length 28

90:e2:ba:06:f9:86 (oui Unknown) > 90:e2:ba:07:4a:5c (oui Unknown), ethertype 802.1Q-QinQ (0x88a8), length 50: vlan 20, p 0, ethertype 802.1Q, vlan 200, p 0, ethertype ARP, Ethernet (len 6), IPv4 (len 4), Reply 11.11.200.37 is-at 90:e2:ba:06:f9:86 (oui Unknown), length 28

v1->v2: remove the comment "TODO: QinQ?".

Cc: Jay Vosburgh <fubar@us.ibm.com>
Cc: Veaceslav Falico <vfalico@redhat.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_main.c | 63 +++++++++++++++++++++++++++++------------
 drivers/net/bonding/bonding.h   |  5 ++++
 2 files changed, 50 insertions(+), 18 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index cbadd6dccb2b..7802c2ebdb0d 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -2124,12 +2124,15 @@ static bool bond_has_this_ip(struct bonding *bond, __be32 ip)
  * switches in VLAN mode (especially if ports are configured as
  * "native" to a VLAN) might not pass non-tagged frames.
  */
-static void bond_arp_send(struct net_device *slave_dev, int arp_op, __be32 dest_ip, __be32 src_ip, unsigned short vlan_id)
+static void bond_arp_send(struct net_device *slave_dev, int arp_op,
+			  __be32 dest_ip, __be32 src_ip,
+			  struct bond_vlan_tag *inner,
+			  struct bond_vlan_tag *outer)
 {
 	struct sk_buff *skb;
 
-	pr_debug("arp %d on slave %s: dst %pI4 src %pI4 vid %d\n",
-		 arp_op, slave_dev->name, &dest_ip, &src_ip, vlan_id);
+	pr_debug("arp %d on slave %s: dst %pI4 src %pI4\n",
+		 arp_op, slave_dev->name, &dest_ip, &src_ip);
 
 	skb = arp_create(arp_op, ETH_P_ARP, dest_ip, slave_dev, src_ip,
 			 NULL, slave_dev->dev_addr, NULL);
@@ -2138,10 +2141,22 @@ static void bond_arp_send(struct net_device *slave_dev, int arp_op, __be32 dest_
 		pr_err("ARP packet allocation failed\n");
 		return;
 	}
-	if (vlan_id) {
-		skb = vlan_put_tag(skb, htons(ETH_P_8021Q), vlan_id);
+	if (outer->vlan_id) {
+		if (inner->vlan_id) {
+			pr_debug("inner tag: proto %X vid %X\n",
+				 ntohs(inner->vlan_proto), inner->vlan_id);
+			skb = __vlan_put_tag(skb, inner->vlan_proto, inner->vlan_id);
+			if (!skb) {
+				pr_err("failed to insert inner VLAN tag\n");
+				return;
+			}
+		}
+
+		pr_debug("outer reg: proto %X vid %X\n",
+			 ntohs(outer->vlan_proto), outer->vlan_id);
+		skb = vlan_put_tag(skb, outer->vlan_proto, outer->vlan_id);
 		if (!skb) {
-			pr_err("failed to insert VLAN tag\n");
+			pr_err("failed to insert outer VLAN tag\n");
 			return;
 		}
 	}
@@ -2154,11 +2169,16 @@ static void bond_arp_send_all(struct bonding *bond, struct slave *slave)
 	struct net_device *upper, *vlan_upper;
 	struct list_head *iter, *vlan_iter;
 	struct rtable *rt;
+	struct bond_vlan_tag inner, outer;
 	__be32 *targets = bond->params.arp_targets, addr;
-	int i, vlan_id;
+	int i;
 
 	for (i = 0; i < BOND_MAX_ARP_TARGETS && targets[i]; i++) {
 		pr_debug("basa: target %pI4\n", &targets[i]);
+		inner.vlan_proto = 0;
+		inner.vlan_id = 0;
+		outer.vlan_proto = 0;
+		outer.vlan_id = 0;
 
 		/* Find out through which dev should the packet go */
 		rt = ip_route_output(dev_net(bond->dev), targets[i], 0,
@@ -2170,12 +2190,10 @@ static void bond_arp_send_all(struct bonding *bond, struct slave *slave)
 			if (bond->params.arp_validate && net_ratelimit())
 				pr_warn("%s: no route to arp_ip_target %pI4 and arp_validate is set\n",
 					bond->dev->name, &targets[i]);
-			bond_arp_send(slave->dev, ARPOP_REQUEST, targets[i], 0, 0);
+			bond_arp_send(slave->dev, ARPOP_REQUEST, targets[i], 0, &inner, &outer);
 			continue;
 		}
 
-		vlan_id = 0;
-
 		/* bond device itself */
 		if (rt->dst.dev == bond->dev)
 			goto found;
@@ -2185,17 +2203,30 @@ static void bond_arp_send_all(struct bonding *bond, struct slave *slave)
 		 * found we verify its upper dev list, searching for the
 		 * rt->dst.dev. If found we save the tag of the vlan and
 		 * proceed to send the packet.
-		 *
-		 * TODO: QinQ?
 		 */
 		netdev_for_each_all_upper_dev_rcu(bond->dev, vlan_upper,
 						  vlan_iter) {
 			if (!is_vlan_dev(vlan_upper))
 				continue;
+
+			if (vlan_upper == rt->dst.dev) {
+				outer.vlan_proto = vlan_dev_vlan_proto(vlan_upper);
+				outer.vlan_id = vlan_dev_vlan_id(vlan_upper);
+				rcu_read_unlock();
+				goto found;
+			}
 			netdev_for_each_all_upper_dev_rcu(vlan_upper, upper,
 							  iter) {
 				if (upper == rt->dst.dev) {
-					vlan_id = vlan_dev_vlan_id(vlan_upper);
+					/* If the upper dev is a vlan dev too,
+					 *  set the vlan tag to inner tag.
+					 */
+					if (is_vlan_dev(upper)) {
+						inner.vlan_proto = vlan_dev_vlan_proto(upper);
+						inner.vlan_id = vlan_dev_vlan_id(upper);
+					}
+					outer.vlan_proto = vlan_dev_vlan_proto(vlan_upper);
+					outer.vlan_id = vlan_dev_vlan_id(vlan_upper);
 					rcu_read_unlock();
 					goto found;
 				}
@@ -2208,10 +2239,6 @@ static void bond_arp_send_all(struct bonding *bond, struct slave *slave)
 		 */
 		netdev_for_each_all_upper_dev_rcu(bond->dev, upper, iter) {
 			if (upper == rt->dst.dev) {
-				/* if it's a vlan - get its VID */
-				if (is_vlan_dev(upper))
-					vlan_id = vlan_dev_vlan_id(upper);
-
 				rcu_read_unlock();
 				goto found;
 			}
@@ -2230,7 +2257,7 @@ found:
 		addr = bond_confirm_addr(rt->dst.dev, targets[i], 0);
 		ip_rt_put(rt);
 		bond_arp_send(slave->dev, ARPOP_REQUEST, targets[i],
-			      addr, vlan_id);
+			      addr, &inner, &outer);
 	}
 }
 
diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h
index 0896f1db24db..b8bdd0acc8f3 100644
--- a/drivers/net/bonding/bonding.h
+++ b/drivers/net/bonding/bonding.h
@@ -266,6 +266,11 @@ struct bonding {
 #define bond_slave_get_rtnl(dev) \
 	((struct slave *) rtnl_dereference(dev->rx_handler_data))
 
+struct bond_vlan_tag {
+	__be16		vlan_proto;
+	unsigned short	vlan_id;
+};
+
 /**
  * Returns NULL if the net_device does not belong to any of the bond's slaves
  *
-- 
cgit v1.2.2


From 4873ac3c8ed3b0285f18b81e501249c26284c2ca Mon Sep 17 00:00:00 2001
From: dingtianhong <dingtianhong@huawei.com>
Date: Tue, 25 Mar 2014 17:44:44 +0800
Subject: bonding: add net_ratelimt to avoid spam in arp interval

Remove the unnecessary log and add net_ratelimit to the others, in order to
avoid spam the log.

Cc: Joe Perches <joe@perches.com>
Cc: Jay Vosburgh <fubar@us.ibm.com>
Cc: Veaceslav Falico <vfalico@redhat.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_main.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 7802c2ebdb0d..5be34b72a048 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -2138,16 +2138,17 @@ static void bond_arp_send(struct net_device *slave_dev, int arp_op,
 			 NULL, slave_dev->dev_addr, NULL);
 
 	if (!skb) {
-		pr_err("ARP packet allocation failed\n");
+		net_err_ratelimited("ARP packet allocation failed\n");
 		return;
 	}
 	if (outer->vlan_id) {
 		if (inner->vlan_id) {
 			pr_debug("inner tag: proto %X vid %X\n",
 				 ntohs(inner->vlan_proto), inner->vlan_id);
-			skb = __vlan_put_tag(skb, inner->vlan_proto, inner->vlan_id);
+			skb = __vlan_put_tag(skb, inner->vlan_proto,
+					     inner->vlan_id);
 			if (!skb) {
-				pr_err("failed to insert inner VLAN tag\n");
+				net_err_ratelimited("failed to insert inner VLAN tag\n");
 				return;
 			}
 		}
@@ -2156,7 +2157,7 @@ static void bond_arp_send(struct net_device *slave_dev, int arp_op,
 			 ntohs(outer->vlan_proto), outer->vlan_id);
 		skb = vlan_put_tag(skb, outer->vlan_proto, outer->vlan_id);
 		if (!skb) {
-			pr_err("failed to insert outer VLAN tag\n");
+			net_err_ratelimited("failed to insert outer VLAN tag\n");
 			return;
 		}
 	}
@@ -2187,9 +2188,10 @@ static void bond_arp_send_all(struct bonding *bond, struct slave *slave)
 			/* there's no route to target - try to send arp
 			 * probe to generate any traffic (arp_validate=0)
 			 */
-			if (bond->params.arp_validate && net_ratelimit())
-				pr_warn("%s: no route to arp_ip_target %pI4 and arp_validate is set\n",
-					bond->dev->name, &targets[i]);
+			if (bond->params.arp_validate)
+				net_warn_ratelimited("%s: no route to arp_ip_target %pI4 and arp_validate is set\n",
+						     bond->dev->name,
+						     &targets[i]);
 			bond_arp_send(slave->dev, ARPOP_REQUEST, targets[i], 0, &inner, &outer);
 			continue;
 		}
-- 
cgit v1.2.2


From 1edb9ca69e8a7988900fc0283e10550b5592164d Mon Sep 17 00:00:00 2001
From: Siva Reddy <siva.kallam@samsung.com>
Date: Tue, 25 Mar 2014 12:10:54 -0700
Subject: net: sxgbe: add basic framework for Samsung 10Gb ethernet driver

This patch adds support for Samsung 10Gb ethernet driver(sxgbe).

- sxgbe core initialization
- Tx and Rx support
- MDIO support
- ISRs for Tx and Rx
- ifconfig support to driver

Signed-off-by: Siva Reddy Kallam <siva.kallam@samsung.com>
Signed-off-by: Vipul Pandya <vipul.pandya@samsung.com>
Signed-off-by: Girish K S <ks.giri@samsung.com>
Neatening-by: Joe Perches <joe@perches.com>
Signed-off-by: Byungho An <bh74.an@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/Kconfig                       |    1 +
 drivers/net/ethernet/Makefile                      |    1 +
 drivers/net/ethernet/samsung/Kconfig               |   16 +
 drivers/net/ethernet/samsung/Makefile              |    5 +
 drivers/net/ethernet/samsung/sxgbe/Kconfig         |    9 +
 drivers/net/ethernet/samsung/sxgbe/Makefile        |    4 +
 drivers/net/ethernet/samsung/sxgbe/sxgbe_common.h  |  462 +++++
 drivers/net/ethernet/samsung/sxgbe/sxgbe_core.c    |  158 ++
 drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.c    |  515 +++++
 drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.h    |  298 +++
 drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.c     |  372 ++++
 drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.h     |   48 +
 drivers/net/ethernet/samsung/sxgbe/sxgbe_ethtool.c |   44 +
 drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c    | 2052 ++++++++++++++++++++
 drivers/net/ethernet/samsung/sxgbe/sxgbe_mdio.c    |  251 +++
 drivers/net/ethernet/samsung/sxgbe/sxgbe_mtl.c     |  254 +++
 drivers/net/ethernet/samsung/sxgbe/sxgbe_mtl.h     |  104 +
 .../net/ethernet/samsung/sxgbe/sxgbe_platform.c    |  253 +++
 drivers/net/ethernet/samsung/sxgbe/sxgbe_reg.h     |  477 +++++
 drivers/net/ethernet/samsung/sxgbe/sxgbe_xpcs.c    |   91 +
 drivers/net/ethernet/samsung/sxgbe/sxgbe_xpcs.h    |   38 +
 21 files changed, 5453 insertions(+)
 create mode 100644 drivers/net/ethernet/samsung/Kconfig
 create mode 100644 drivers/net/ethernet/samsung/Makefile
 create mode 100644 drivers/net/ethernet/samsung/sxgbe/Kconfig
 create mode 100644 drivers/net/ethernet/samsung/sxgbe/Makefile
 create mode 100644 drivers/net/ethernet/samsung/sxgbe/sxgbe_common.h
 create mode 100644 drivers/net/ethernet/samsung/sxgbe/sxgbe_core.c
 create mode 100644 drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.c
 create mode 100644 drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.h
 create mode 100644 drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.c
 create mode 100644 drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.h
 create mode 100644 drivers/net/ethernet/samsung/sxgbe/sxgbe_ethtool.c
 create mode 100644 drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
 create mode 100644 drivers/net/ethernet/samsung/sxgbe/sxgbe_mdio.c
 create mode 100644 drivers/net/ethernet/samsung/sxgbe/sxgbe_mtl.c
 create mode 100644 drivers/net/ethernet/samsung/sxgbe/sxgbe_mtl.h
 create mode 100644 drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c
 create mode 100644 drivers/net/ethernet/samsung/sxgbe/sxgbe_reg.h
 create mode 100644 drivers/net/ethernet/samsung/sxgbe/sxgbe_xpcs.c
 create mode 100644 drivers/net/ethernet/samsung/sxgbe/sxgbe_xpcs.h

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 39484b534f5e..39b26fe28d10 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -150,6 +150,7 @@ config S6GMAC
 	  To compile this driver as a module, choose M here. The module
 	  will be called s6gmac.
 
+source "drivers/net/ethernet/samsung/Kconfig"
 source "drivers/net/ethernet/seeq/Kconfig"
 source "drivers/net/ethernet/silan/Kconfig"
 source "drivers/net/ethernet/sis/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index adf61af507f7..545d0b3b9cb4 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -61,6 +61,7 @@ obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/
 obj-$(CONFIG_SH_ETH) += renesas/
 obj-$(CONFIG_NET_VENDOR_RDC) += rdc/
 obj-$(CONFIG_S6GMAC) += s6gmac.o
+obj-$(CONFIG_NET_VENDOR_SAMSUNG) += samsung/
 obj-$(CONFIG_NET_VENDOR_SEEQ) += seeq/
 obj-$(CONFIG_NET_VENDOR_SILAN) += silan/
 obj-$(CONFIG_NET_VENDOR_SIS) += sis/
diff --git a/drivers/net/ethernet/samsung/Kconfig b/drivers/net/ethernet/samsung/Kconfig
new file mode 100644
index 000000000000..7902341f2623
--- /dev/null
+++ b/drivers/net/ethernet/samsung/Kconfig
@@ -0,0 +1,16 @@
+#
+# Samsung Ethernet device configuration
+#
+
+config NET_VENDOR_SAMSUNG
+	bool "Samsung Ethernet device"
+	default y
+	---help---
+	  This is the driver for the SXGBE 10G Ethernet IP block found on Samsung
+	  platforms.
+
+if NET_VENDOR_SAMSUNG
+
+source "drivers/net/ethernet/samsung/sxgbe/Kconfig"
+
+endif # NET_VENDOR_SAMSUNG
diff --git a/drivers/net/ethernet/samsung/Makefile b/drivers/net/ethernet/samsung/Makefile
new file mode 100644
index 000000000000..1773c29b8d76
--- /dev/null
+++ b/drivers/net/ethernet/samsung/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Samsung Ethernet device drivers.
+#
+
+obj-$(CONFIG_SXGBE_ETH) += sxgbe/
diff --git a/drivers/net/ethernet/samsung/sxgbe/Kconfig b/drivers/net/ethernet/samsung/sxgbe/Kconfig
new file mode 100644
index 000000000000..d79288c51d0a
--- /dev/null
+++ b/drivers/net/ethernet/samsung/sxgbe/Kconfig
@@ -0,0 +1,9 @@
+config SXGBE_ETH
+	tristate "Samsung 10G/2.5G/1G SXGBE Ethernet driver"
+	depends on HAS_IOMEM && HAS_DMA
+	select PHYLIB
+	select CRC32
+	select PTP_1588_CLOCK
+	---help---
+	  This is the driver for the SXGBE 10G Ethernet IP block found on Samsung
+	  platforms.
diff --git a/drivers/net/ethernet/samsung/sxgbe/Makefile b/drivers/net/ethernet/samsung/sxgbe/Makefile
new file mode 100644
index 000000000000..dcc80b9d4370
--- /dev/null
+++ b/drivers/net/ethernet/samsung/sxgbe/Makefile
@@ -0,0 +1,4 @@
+obj-$(CONFIG_SXGBE_ETH) += samsung-sxgbe.o
+samsung-sxgbe-objs:= sxgbe_platform.o sxgbe_main.o sxgbe_desc.o \
+		sxgbe_dma.o sxgbe_core.o sxgbe_mtl.o  sxgbe_mdio.o \
+		sxgbe_ethtool.o sxgbe_xpcs.o $(samsung-sxgbe-y)
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_common.h b/drivers/net/ethernet/samsung/sxgbe/sxgbe_common.h
new file mode 100644
index 000000000000..c7803f199967
--- /dev/null
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_common.h
@@ -0,0 +1,462 @@
+/* 10G controller driver for Samsung SoCs
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Siva Reddy Kallam <siva.kallam@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __SXGBE_COMMON_H__
+#define __SXGBE_COMMON_H__
+
+/* forward references */
+struct sxgbe_desc_ops;
+struct sxgbe_dma_ops;
+struct sxgbe_mtl_ops;
+
+#define SXGBE_RESOURCE_NAME	"sam_sxgbeeth"
+#define DRV_MODULE_VERSION	"November_2013"
+
+/* MAX HW feature words */
+#define SXGBE_HW_WORDS 3
+
+#define SXGBE_RX_COE_NONE	0
+
+/* CSR Frequency Access Defines*/
+#define SXGBE_CSR_F_150M	150000000
+#define SXGBE_CSR_F_250M	250000000
+#define SXGBE_CSR_F_300M	300000000
+#define SXGBE_CSR_F_350M	350000000
+#define SXGBE_CSR_F_400M	400000000
+#define SXGBE_CSR_F_500M	500000000
+
+/* pause time */
+#define SXGBE_PAUSE_TIME 0x200
+
+/* tx queues */
+#define SXGBE_TX_QUEUES   8
+#define SXGBE_RX_QUEUES   16
+
+/* Calculated based how much time does it take to fill 256KB Rx memory
+ * at 10Gb speed at 156MHz clock rate and considered little less then
+ * the actual value.
+ */
+#define SXGBE_MAX_DMA_RIWT	0x70
+#define SXGBE_MIN_DMA_RIWT	0x01
+
+/* Tx coalesce parameters */
+#define SXGBE_COAL_TX_TIMER	40000
+#define SXGBE_MAX_COAL_TX_TICK	100000
+#define SXGBE_TX_MAX_FRAMES	512
+#define SXGBE_TX_FRAMES	128
+
+/* SXGBE TX FIFO is 8K, Rx FIFO is 16K */
+#define BUF_SIZE_16KiB 16384
+#define BUF_SIZE_8KiB 8192
+#define BUF_SIZE_4KiB 4096
+#define BUF_SIZE_2KiB 2048
+
+#define SXGBE_DEFAULT_LIT_LS	0x3E8
+#define SXGBE_DEFAULT_TWT_LS	0x0
+
+/* Flow Control defines */
+#define SXGBE_FLOW_OFF		0
+#define SXGBE_FLOW_RX		1
+#define SXGBE_FLOW_TX		2
+#define SXGBE_FLOW_AUTO		(SXGBE_FLOW_TX | SXGBE_FLOW_RX)
+
+#define SF_DMA_MODE 1		/* DMA STORE-AND-FORWARD Operation Mode */
+
+/* errors */
+#define RX_GMII_ERR		0x01
+#define RX_WATCHDOG_ERR		0x02
+#define RX_CRC_ERR		0x03
+#define RX_GAINT_ERR		0x04
+#define RX_IP_HDR_ERR		0x05
+#define RX_PAYLOAD_ERR		0x06
+#define RX_OVERFLOW_ERR		0x07
+
+/* pkt type */
+#define RX_LEN_PKT		0x00
+#define RX_MACCTL_PKT		0x01
+#define RX_DCBCTL_PKT		0x02
+#define RX_ARP_PKT		0x03
+#define RX_OAM_PKT		0x04
+#define RX_UNTAG_PKT		0x05
+#define RX_OTHER_PKT		0x07
+#define RX_SVLAN_PKT		0x08
+#define RX_CVLAN_PKT		0x09
+#define RX_DVLAN_OCVLAN_ICVLAN_PKT		0x0A
+#define RX_DVLAN_OSVLAN_ISVLAN_PKT		0x0B
+#define RX_DVLAN_OSVLAN_ICVLAN_PKT		0x0C
+#define RX_DVLAN_OCVLAN_ISVLAN_PKT		0x0D
+
+#define RX_NOT_IP_PKT		0x00
+#define RX_IPV4_TCP_PKT		0x01
+#define RX_IPV4_UDP_PKT		0x02
+#define RX_IPV4_ICMP_PKT	0x03
+#define RX_IPV4_UNKNOWN_PKT	0x07
+#define RX_IPV6_TCP_PKT		0x09
+#define RX_IPV6_UDP_PKT		0x0A
+#define RX_IPV6_ICMP_PKT	0x0B
+#define RX_IPV6_UNKNOWN_PKT	0x0F
+
+#define RX_NO_PTP		0x00
+#define RX_PTP_SYNC		0x01
+#define RX_PTP_FOLLOW_UP	0x02
+#define RX_PTP_DELAY_REQ	0x03
+#define RX_PTP_DELAY_RESP	0x04
+#define RX_PTP_PDELAY_REQ	0x05
+#define RX_PTP_PDELAY_RESP	0x06
+#define RX_PTP_PDELAY_FOLLOW_UP	0x07
+#define RX_PTP_ANNOUNCE		0x08
+#define RX_PTP_MGMT		0x09
+#define RX_PTP_SIGNAL		0x0A
+#define RX_PTP_RESV_MSG		0x0F
+
+enum dma_irq_status {
+	tx_hard_error	= BIT(0),
+	tx_bump_tc	= BIT(1),
+	handle_tx	= BIT(2),
+	rx_hard_error	= BIT(3),
+	rx_bump_tc	= BIT(4),
+	handle_rx	= BIT(5),
+};
+
+#define NETIF_F_HW_VLAN_ALL     (NETIF_F_HW_VLAN_CTAG_RX |	\
+				 NETIF_F_HW_VLAN_STAG_RX |	\
+				 NETIF_F_HW_VLAN_CTAG_TX |	\
+				 NETIF_F_HW_VLAN_STAG_TX |	\
+				 NETIF_F_HW_VLAN_CTAG_FILTER |	\
+				 NETIF_F_HW_VLAN_STAG_FILTER)
+
+/* MMC control defines */
+#define SXGBE_MMC_CTRL_CNT_FRZ  0x00000008
+
+/* SXGBE HW ADDR regs */
+#define SXGBE_ADDR_HIGH(reg)    (((reg > 15) ? 0x00000800 : 0x00000040) + \
+				 (reg * 8))
+#define SXGBE_ADDR_LOW(reg)     (((reg > 15) ? 0x00000804 : 0x00000044) + \
+				 (reg * 8))
+#define SXGBE_MAX_PERFECT_ADDRESSES 32 /* Maximum unicast perfect filtering */
+#define SXGBE_FRAME_FILTER       0x00000004      /* Frame Filter */
+
+/* SXGBE Frame Filter defines */
+#define SXGBE_FRAME_FILTER_PR    0x00000001      /* Promiscuous Mode */
+#define SXGBE_FRAME_FILTER_HUC   0x00000002      /* Hash Unicast */
+#define SXGBE_FRAME_FILTER_HMC   0x00000004      /* Hash Multicast */
+#define SXGBE_FRAME_FILTER_DAIF  0x00000008      /* DA Inverse Filtering */
+#define SXGBE_FRAME_FILTER_PM    0x00000010      /* Pass all multicast */
+#define SXGBE_FRAME_FILTER_DBF   0x00000020      /* Disable Broadcast frames */
+#define SXGBE_FRAME_FILTER_SAIF  0x00000100      /* Inverse Filtering */
+#define SXGBE_FRAME_FILTER_SAF   0x00000200      /* Source Address Filter */
+#define SXGBE_FRAME_FILTER_HPF   0x00000400      /* Hash or perfect Filter */
+#define SXGBE_FRAME_FILTER_RA    0x80000000      /* Receive all mode */
+
+#define SXGBE_HASH_TABLE_SIZE    64
+#define SXGBE_HASH_HIGH          0x00000008      /* Multicast Hash Table High */
+#define SXGBE_HASH_LOW           0x0000000c      /* Multicast Hash Table Low */
+
+#define SXGBE_HI_REG_AE          0x80000000
+
+/* Minimum and maximum MTU */
+#define MIN_MTU         68
+#define MAX_MTU         9000
+
+#define SXGBE_FOR_EACH_QUEUE(max_queues, queue_num)			\
+	for (queue_num = 0; queue_num < max_queues; queue_num++)
+
+/* sxgbe statistics counters */
+struct sxgbe_extra_stats {
+	/* TX/RX IRQ events */
+	unsigned long tx_underflow_irq;
+	unsigned long tx_process_stopped_irq;
+	unsigned long tx_ctxt_desc_err;
+	unsigned long tx_threshold;
+	unsigned long rx_threshold;
+	unsigned long tx_pkt_n;
+	unsigned long rx_pkt_n;
+	unsigned long normal_irq_n;
+	unsigned long tx_normal_irq_n;
+	unsigned long rx_normal_irq_n;
+	unsigned long napi_poll;
+	unsigned long tx_clean;
+	unsigned long tx_reset_ic_bit;
+	unsigned long rx_process_stopped_irq;
+	unsigned long rx_underflow_irq;
+
+	/* Bus access errors */
+	unsigned long fatal_bus_error_irq;
+	unsigned long tx_read_transfer_err;
+	unsigned long tx_write_transfer_err;
+	unsigned long tx_desc_access_err;
+	unsigned long tx_buffer_access_err;
+	unsigned long tx_data_transfer_err;
+	unsigned long rx_read_transfer_err;
+	unsigned long rx_write_transfer_err;
+	unsigned long rx_desc_access_err;
+	unsigned long rx_buffer_access_err;
+	unsigned long rx_data_transfer_err;
+
+	/* RX specific */
+	/* L2 error */
+	unsigned long rx_code_gmii_err;
+	unsigned long rx_watchdog_err;
+	unsigned long rx_crc_err;
+	unsigned long rx_gaint_pkt_err;
+	unsigned long ip_hdr_err;
+	unsigned long ip_payload_err;
+	unsigned long overflow_error;
+
+	/* L2 Pkt type */
+	unsigned long len_pkt;
+	unsigned long mac_ctl_pkt;
+	unsigned long dcb_ctl_pkt;
+	unsigned long arp_pkt;
+	unsigned long oam_pkt;
+	unsigned long untag_okt;
+	unsigned long other_pkt;
+	unsigned long svlan_tag_pkt;
+	unsigned long cvlan_tag_pkt;
+	unsigned long dvlan_ocvlan_icvlan_pkt;
+	unsigned long dvlan_osvlan_isvlan_pkt;
+	unsigned long dvlan_osvlan_icvlan_pkt;
+	unsigned long dvan_ocvlan_icvlan_pkt;
+
+	/* L3/L4 Pkt type */
+	unsigned long not_ip_pkt;
+	unsigned long ip4_tcp_pkt;
+	unsigned long ip4_udp_pkt;
+	unsigned long ip4_icmp_pkt;
+	unsigned long ip4_unknown_pkt;
+	unsigned long ip6_tcp_pkt;
+	unsigned long ip6_udp_pkt;
+	unsigned long ip6_icmp_pkt;
+	unsigned long ip6_unknown_pkt;
+
+	/* Filter specific */
+	unsigned long vlan_filter_match;
+	unsigned long sa_filter_fail;
+	unsigned long da_filter_fail;
+	unsigned long hash_filter_pass;
+	unsigned long l3_filter_match;
+	unsigned long l4_filter_match;
+
+	/* RX context specific */
+	unsigned long timestamp_dropped;
+	unsigned long rx_msg_type_no_ptp;
+	unsigned long rx_ptp_type_sync;
+	unsigned long rx_ptp_type_follow_up;
+	unsigned long rx_ptp_type_delay_req;
+	unsigned long rx_ptp_type_delay_resp;
+	unsigned long rx_ptp_type_pdelay_req;
+	unsigned long rx_ptp_type_pdelay_resp;
+	unsigned long rx_ptp_type_pdelay_follow_up;
+	unsigned long rx_ptp_announce;
+	unsigned long rx_ptp_mgmt;
+	unsigned long rx_ptp_signal;
+	unsigned long rx_ptp_resv_msg_type;
+};
+
+struct mac_link {
+	int port;
+	int duplex;
+	int speed;
+};
+
+struct mii_regs {
+	unsigned int addr;	/* MII Address */
+	unsigned int data;	/* MII Data */
+};
+
+struct sxgbe_core_ops {
+	/* MAC core initialization */
+	void (*core_init)(void __iomem *ioaddr);
+	/* Dump MAC registers */
+	void (*dump_regs)(void __iomem *ioaddr);
+	/* Handle extra events on specific interrupts hw dependent */
+	int (*host_irq_status)(void __iomem *ioaddr,
+			       struct sxgbe_extra_stats *x);
+	/* Set power management mode (e.g. magic frame) */
+	void (*pmt)(void __iomem *ioaddr, unsigned long mode);
+	/* Set/Get Unicast MAC addresses */
+	void (*set_umac_addr)(void __iomem *ioaddr, unsigned char *addr,
+			      unsigned int reg_n);
+	void (*get_umac_addr)(void __iomem *ioaddr, unsigned char *addr,
+			      unsigned int reg_n);
+	void (*enable_rx)(void __iomem *ioaddr, bool enable);
+	void (*enable_tx)(void __iomem *ioaddr, bool enable);
+
+	/* controller version specific operations */
+	int (*get_controller_version)(void __iomem *ioaddr);
+
+	/* If supported then get the optional core features */
+	unsigned int (*get_hw_feature)(void __iomem *ioaddr,
+				       unsigned char feature_index);
+	/* adjust SXGBE speed */
+	void (*set_speed)(void __iomem *ioaddr, unsigned char speed);
+};
+
+const struct sxgbe_core_ops *sxgbe_get_core_ops(void);
+
+struct sxgbe_ops {
+	const struct sxgbe_core_ops *mac;
+	const struct sxgbe_desc_ops *desc;
+	const struct sxgbe_dma_ops *dma;
+	const struct sxgbe_mtl_ops *mtl;
+	struct mii_regs mii;	/* MII register Addresses */
+	struct mac_link link;
+	unsigned int ctrl_uid;
+	unsigned int ctrl_id;
+};
+
+/* SXGBE private data structures */
+struct sxgbe_tx_queue {
+	unsigned int irq_no;
+	struct sxgbe_priv_data *priv_ptr;
+	struct sxgbe_tx_norm_desc *dma_tx;
+	dma_addr_t dma_tx_phy;
+	dma_addr_t *tx_skbuff_dma;
+	struct sk_buff **tx_skbuff;
+	struct timer_list txtimer;
+	spinlock_t tx_lock;	/* lock for tx queues */
+	unsigned int cur_tx;
+	unsigned int dirty_tx;
+	u32 tx_count_frames;
+	u32 tx_coal_frames;
+	u32 tx_coal_timer;
+	int hwts_tx_en;
+	u8 queue_no;
+};
+
+struct sxgbe_rx_queue {
+	struct sxgbe_priv_data *priv_ptr;
+	struct sxgbe_rx_norm_desc *dma_rx;
+	struct sk_buff **rx_skbuff;
+	unsigned int cur_rx;
+	unsigned int dirty_rx;
+	unsigned int irq_no;
+	u32 rx_riwt;
+	dma_addr_t *rx_skbuff_dma;
+	dma_addr_t dma_rx_phy;
+	u8 queue_no;
+};
+
+/* SXGBE HW capabilities */
+struct sxgbe_hw_features {
+	/****** CAP [0] *******/
+	unsigned int pmt_remote_wake_up;
+	unsigned int pmt_magic_frame;
+	/* IEEE 1588-2008 */
+	unsigned int atime_stamp;
+
+	unsigned int tx_csum_offload;
+	unsigned int rx_csum_offload;
+	unsigned int multi_macaddr;
+	unsigned int tstamp_srcselect;
+	unsigned int sa_vlan_insert;
+
+	/****** CAP [1] *******/
+	unsigned int rxfifo_size;
+	unsigned int txfifo_size;
+	unsigned int atstmap_hword;
+	unsigned int dcb_enable;
+	unsigned int splithead_enable;
+	unsigned int tcpseg_offload;
+	unsigned int debug_mem;
+	unsigned int rss_enable;
+	unsigned int hash_tsize;
+	unsigned int l3l4_filer_size;
+
+	/* This value is in bytes and
+	 * as mentioned in HW features
+	 * of SXGBE data book
+	 */
+	unsigned int rx_mtl_qsize;
+	unsigned int tx_mtl_qsize;
+
+	/****** CAP [2] *******/
+	/* TX and RX number of channels */
+	unsigned int rx_mtl_queues;
+	unsigned int tx_mtl_queues;
+	unsigned int rx_dma_channels;
+	unsigned int tx_dma_channels;
+	unsigned int pps_output_count;
+	unsigned int aux_input_count;
+};
+
+struct sxgbe_priv_data {
+	/* DMA descriptos */
+	struct sxgbe_tx_queue *txq[SXGBE_TX_QUEUES];
+	struct sxgbe_rx_queue *rxq[SXGBE_RX_QUEUES];
+	u8 cur_rx_qnum;
+
+	unsigned int dma_tx_size;
+	unsigned int dma_rx_size;
+	unsigned int dma_buf_sz;
+	u32 rx_riwt;
+
+	struct napi_struct napi;
+
+	void __iomem *ioaddr;
+	struct net_device *dev;
+	struct device *device;
+	struct sxgbe_ops *hw;	/* sxgbe specific ops */
+	int no_csum_insertion;
+	int irq;
+	spinlock_t stats_lock;	/* lock for tx/rx statatics */
+
+	struct phy_device *phydev;
+	int oldlink;
+	int speed;
+	int oldduplex;
+	struct mii_bus *mii;
+	int mii_irq[PHY_MAX_ADDR];
+	u8 rx_pause;
+	u8 tx_pause;
+
+	struct sxgbe_extra_stats xstats;
+	struct sxgbe_plat_data *plat;
+	struct sxgbe_hw_features hw_cap;
+
+	u32 msg_enable;
+
+	struct clk *sxgbe_clk;
+	int clk_csr;
+	unsigned int mode;
+	unsigned int default_addend;
+
+	/* advanced time stamp support */
+	u32 adv_ts;
+	int use_riwt;
+
+	/* tc control */
+	int tx_tc;
+	int rx_tc;
+};
+
+/* Function prototypes */
+struct sxgbe_priv_data *sxgbe_drv_probe(struct device *device,
+					struct sxgbe_plat_data *plat_dat,
+					void __iomem *addr);
+int sxgbe_drv_remove(struct net_device *ndev);
+void sxgbe_set_ethtool_ops(struct net_device *netdev);
+int sxgbe_mdio_unregister(struct net_device *ndev);
+int sxgbe_mdio_register(struct net_device *ndev);
+int sxgbe_register_platform(void);
+void sxgbe_unregister_platform(void);
+
+#ifdef CONFIG_PM
+int sxgbe_suspend(struct net_device *ndev);
+int sxgbe_resume(struct net_device *ndev);
+int sxgbe_freeze(struct net_device *ndev);
+int sxgbe_restore(struct net_device *ndev);
+#endif /* CONFIG_PM */
+
+const struct sxgbe_mtl_ops *sxgbe_get_mtl_ops(void);
+
+#endif /* __SXGBE_COMMON_H__ */
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_core.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_core.c
new file mode 100644
index 000000000000..4ad31bbc42c9
--- /dev/null
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_core.c
@@ -0,0 +1,158 @@
+/* 10G controller driver for Samsung SoCs
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Siva Reddy Kallam <siva.kallam@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/export.h>
+#include <linux/io.h>
+#include <linux/netdevice.h>
+#include <linux/phy.h>
+
+#include "sxgbe_common.h"
+#include "sxgbe_reg.h"
+
+/* MAC core initialization */
+static void sxgbe_core_init(void __iomem *ioaddr)
+{
+	u32 regval;
+
+	/* TX configuration */
+	regval = readl(ioaddr + SXGBE_CORE_TX_CONFIG_REG);
+	/* Other configurable parameters IFP, IPG, ISR, ISM
+	 * needs to be set if needed
+	 */
+	regval |= SXGBE_TX_JABBER_DISABLE;
+	writel(regval, ioaddr + SXGBE_CORE_TX_CONFIG_REG);
+
+	/* RX configuration */
+	regval = readl(ioaddr + SXGBE_CORE_RX_CONFIG_REG);
+	/* Other configurable parameters CST, SPEN, USP, GPSLCE
+	 * WD, LM, S2KP, HDSMS, GPSL, ELEN, ARPEN needs to be
+	 * set if needed
+	 */
+	regval |= SXGBE_RX_JUMBPKT_ENABLE | SXGBE_RX_ACS_ENABLE;
+	writel(regval, ioaddr + SXGBE_CORE_RX_CONFIG_REG);
+}
+
+/* Dump MAC registers */
+static void sxgbe_core_dump_regs(void __iomem *ioaddr)
+{
+}
+
+/* Handle extra events on specific interrupts hw dependent */
+static int sxgbe_core_host_irq_status(void __iomem *ioaddr,
+				      struct sxgbe_extra_stats *x)
+{
+	return 0;
+}
+
+/* Set power management mode (e.g. magic frame) */
+static void sxgbe_core_pmt(void __iomem *ioaddr, unsigned long mode)
+{
+}
+
+/* Set/Get Unicast MAC addresses */
+static void sxgbe_core_set_umac_addr(void __iomem *ioaddr, unsigned char *addr,
+				     unsigned int reg_n)
+{
+	u32 high_word, low_word;
+
+	high_word = (addr[5] << 8) || (addr[4]);
+	low_word = ((addr[3] << 24) || (addr[2] << 16) ||
+		    (addr[1] << 8) || (addr[0]));
+	writel(high_word, ioaddr + SXGBE_CORE_ADD_HIGHOFFSET(reg_n));
+	writel(low_word, ioaddr + SXGBE_CORE_ADD_LOWOFFSET(reg_n));
+}
+
+static void sxgbe_core_get_umac_addr(void __iomem *ioaddr, unsigned char *addr,
+				     unsigned int reg_n)
+{
+	u32 high_word, low_word;
+
+	high_word = readl(ioaddr + SXGBE_CORE_ADD_HIGHOFFSET(reg_n));
+	low_word = readl(ioaddr + SXGBE_CORE_ADD_LOWOFFSET(reg_n));
+
+	/* extract and assign address */
+	addr[5] = (high_word & 0x0000FF00) >> 8;
+	addr[4] = (high_word & 0x000000FF);
+	addr[3] = (low_word & 0xFF000000) >> 24;
+	addr[2] = (low_word & 0x00FF0000) >> 16;
+	addr[1] = (low_word & 0x0000FF00) >> 8;
+	addr[0] = (low_word & 0x000000FF);
+}
+
+static void sxgbe_enable_tx(void __iomem *ioaddr, bool enable)
+{
+	u32 tx_config;
+
+	tx_config = readl(ioaddr + SXGBE_CORE_TX_CONFIG_REG);
+	tx_config &= ~SXGBE_TX_ENABLE;
+
+	if (enable)
+		tx_config |= SXGBE_TX_ENABLE;
+	writel(tx_config, ioaddr + SXGBE_CORE_TX_CONFIG_REG);
+}
+
+static void sxgbe_enable_rx(void __iomem *ioaddr, bool enable)
+{
+	u32 rx_config;
+
+	rx_config = readl(ioaddr + SXGBE_CORE_RX_CONFIG_REG);
+	rx_config &= ~SXGBE_RX_ENABLE;
+
+	if (enable)
+		rx_config |= SXGBE_RX_ENABLE;
+	writel(rx_config, ioaddr + SXGBE_CORE_RX_CONFIG_REG);
+}
+
+static int sxgbe_get_controller_version(void __iomem *ioaddr)
+{
+	return readl(ioaddr + SXGBE_CORE_VERSION_REG);
+}
+
+/* If supported then get the optional core features */
+static unsigned int sxgbe_get_hw_feature(void __iomem *ioaddr,
+					 unsigned char feature_index)
+{
+	return readl(ioaddr + (SXGBE_CORE_HW_FEA_REG(feature_index)));
+}
+
+static void sxgbe_core_set_speed(void __iomem *ioaddr, unsigned char speed)
+{
+	u32 tx_cfg = readl(ioaddr + SXGBE_CORE_TX_CONFIG_REG);
+
+	/* clear the speed bits */
+	tx_cfg &= ~0x60000000;
+	tx_cfg |= (speed << SXGBE_SPEED_LSHIFT);
+
+	/* set the speed */
+	writel(tx_cfg, ioaddr + SXGBE_CORE_TX_CONFIG_REG);
+}
+
+const struct sxgbe_core_ops core_ops = {
+	.core_init		= sxgbe_core_init,
+	.dump_regs		= sxgbe_core_dump_regs,
+	.host_irq_status	= sxgbe_core_host_irq_status,
+	.pmt			= sxgbe_core_pmt,
+	.set_umac_addr		= sxgbe_core_set_umac_addr,
+	.get_umac_addr		= sxgbe_core_get_umac_addr,
+	.enable_rx		= sxgbe_enable_rx,
+	.enable_tx		= sxgbe_enable_tx,
+	.get_controller_version	= sxgbe_get_controller_version,
+	.get_hw_feature		= sxgbe_get_hw_feature,
+	.set_speed		= sxgbe_core_set_speed,
+};
+
+const struct sxgbe_core_ops *sxgbe_get_core_ops(void)
+{
+	return &core_ops;
+}
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.c
new file mode 100644
index 000000000000..7cb5520475b7
--- /dev/null
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.c
@@ -0,0 +1,515 @@
+/* 10G controller driver for Samsung SoCs
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Siva Reddy Kallam <siva.kallam@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/bitops.h>
+#include <linux/export.h>
+#include <linux/io.h>
+#include <linux/netdevice.h>
+#include <linux/phy.h>
+
+#include "sxgbe_common.h"
+#include "sxgbe_dma.h"
+#include "sxgbe_desc.h"
+
+/* DMA TX descriptor ring initialization */
+static void sxgbe_init_tx_desc(struct sxgbe_tx_norm_desc *p)
+{
+	p->tdes23.tx_rd_des23.own_bit = 0;
+}
+
+static void sxgbe_tx_desc_enable_tse(struct sxgbe_tx_norm_desc *p, u8 is_tse,
+				     u32 total_hdr_len, u32 tcp_hdr_len,
+				     u32 tcp_payload_len)
+{
+	p->tdes23.tx_rd_des23.tse_bit = is_tse;
+	p->tdes23.tx_rd_des23.buf1_size = total_hdr_len;
+	p->tdes23.tx_rd_des23.tcp_hdr_len = tcp_hdr_len / 4;
+	p->tdes23.tx_rd_des23.tx_pkt_len.tcp_payload_len  = tcp_payload_len;
+}
+
+/* Assign buffer lengths for descriptor */
+static void sxgbe_prepare_tx_desc(struct sxgbe_tx_norm_desc *p, u8 is_fd,
+				  int buf1_len, int pkt_len, int cksum)
+{
+	p->tdes23.tx_rd_des23.first_desc = is_fd;
+	p->tdes23.tx_rd_des23.buf1_size = buf1_len;
+
+	p->tdes23.tx_rd_des23.tx_pkt_len.cksum_pktlen.total_pkt_len = pkt_len;
+
+	if (cksum)
+		p->tdes23.tx_rd_des23.tx_pkt_len.cksum_pktlen.cksum_ctl = cic_full;
+}
+
+/* Set VLAN control information */
+static void sxgbe_tx_vlanctl_desc(struct sxgbe_tx_norm_desc *p, int vlan_ctl)
+{
+	p->tdes23.tx_rd_des23.vlan_tag_ctl = vlan_ctl;
+}
+
+/* Set the owner of Normal descriptor */
+static void sxgbe_set_tx_owner(struct sxgbe_tx_norm_desc *p)
+{
+	p->tdes23.tx_rd_des23.own_bit = 1;
+}
+
+/* Get the owner of Normal descriptor */
+static int sxgbe_get_tx_owner(struct sxgbe_tx_norm_desc *p)
+{
+	return p->tdes23.tx_rd_des23.own_bit;
+}
+
+/* Invoked by the xmit function to close the tx descriptor */
+static void sxgbe_close_tx_desc(struct sxgbe_tx_norm_desc *p)
+{
+	p->tdes23.tx_rd_des23.last_desc = 1;
+	p->tdes23.tx_rd_des23.int_on_com = 1;
+}
+
+/* Clean the tx descriptor as soon as the tx irq is received */
+static void sxgbe_release_tx_desc(struct sxgbe_tx_norm_desc *p)
+{
+	memset(p, 0, sizeof(*p));
+}
+
+/* Clear interrupt on tx frame completion. When this bit is
+ * set an interrupt happens as soon as the frame is transmitted
+ */
+static void sxgbe_clear_tx_ic(struct sxgbe_tx_norm_desc *p)
+{
+	p->tdes23.tx_rd_des23.int_on_com = 0;
+}
+
+/* Last tx segment reports the transmit status */
+static int sxgbe_get_tx_ls(struct sxgbe_tx_norm_desc *p)
+{
+	return p->tdes23.tx_rd_des23.last_desc;
+}
+
+/* Get the buffer size from the descriptor */
+static int sxgbe_get_tx_len(struct sxgbe_tx_norm_desc *p)
+{
+	return p->tdes23.tx_rd_des23.buf1_size;
+}
+
+/* Set tx timestamp enable bit */
+static void sxgbe_tx_enable_tstamp(struct sxgbe_tx_norm_desc *p)
+{
+	p->tdes23.tx_rd_des23.timestmp_enable = 1;
+}
+
+/* get tx timestamp status */
+static int sxgbe_get_tx_timestamp_status(struct sxgbe_tx_norm_desc *p)
+{
+	return p->tdes23.tx_rd_des23.timestmp_enable;
+}
+
+/* TX Context Descripto Specific */
+static void sxgbe_tx_ctxt_desc_set_ctxt(struct sxgbe_tx_ctxt_desc *p)
+{
+	p->ctxt_bit = 1;
+}
+
+/* Set the owner of TX context descriptor */
+static void sxgbe_tx_ctxt_desc_set_owner(struct sxgbe_tx_ctxt_desc *p)
+{
+	p->own_bit = 1;
+}
+
+/* Get the owner of TX context descriptor */
+static int sxgbe_tx_ctxt_desc_get_owner(struct sxgbe_tx_ctxt_desc *p)
+{
+	return p->own_bit;
+}
+
+/* Set TX mss in TX context Descriptor */
+static void sxgbe_tx_ctxt_desc_set_mss(struct sxgbe_tx_ctxt_desc *p, int mss)
+{
+	p->maxseg_size = mss;
+}
+
+/* Get TX mss from TX context Descriptor */
+static int sxgbe_tx_ctxt_desc_get_mss(struct sxgbe_tx_ctxt_desc *p)
+{
+	return p->maxseg_size;
+}
+
+/* Set TX tcmssv in TX context Descriptor */
+static void sxgbe_tx_ctxt_desc_set_tcmssv(struct sxgbe_tx_ctxt_desc *p)
+{
+	p->tcmssv = 1;
+}
+
+/* Reset TX ostc in TX context Descriptor */
+static void sxgbe_tx_ctxt_desc_reset_ostc(struct sxgbe_tx_ctxt_desc *p)
+{
+	p->ostc = 0;
+}
+
+/* Set IVLAN information */
+static void sxgbe_tx_ctxt_desc_set_ivlantag(struct sxgbe_tx_ctxt_desc *p,
+					    int is_ivlanvalid, int ivlan_tag,
+					    int ivlan_ctl)
+{
+	if (is_ivlanvalid) {
+		p->ivlan_tag_valid = is_ivlanvalid;
+		p->ivlan_tag = ivlan_tag;
+		p->ivlan_tag_ctl = ivlan_ctl;
+	}
+}
+
+/* Return IVLAN Tag */
+static int sxgbe_tx_ctxt_desc_get_ivlantag(struct sxgbe_tx_ctxt_desc *p)
+{
+	return p->ivlan_tag;
+}
+
+/* Set VLAN Tag */
+static void sxgbe_tx_ctxt_desc_set_vlantag(struct sxgbe_tx_ctxt_desc *p,
+					   int is_vlanvalid, int vlan_tag)
+{
+	if (is_vlanvalid) {
+		p->vltag_valid = is_vlanvalid;
+		p->vlan_tag = vlan_tag;
+	}
+}
+
+/* Return VLAN Tag */
+static int sxgbe_tx_ctxt_desc_get_vlantag(struct sxgbe_tx_ctxt_desc *p)
+{
+	return p->vlan_tag;
+}
+
+/* Set Time stamp */
+static void sxgbe_tx_ctxt_desc_set_tstamp(struct sxgbe_tx_ctxt_desc *p,
+					  u8 ostc_enable, u64 tstamp)
+{
+	if (ostc_enable) {
+		p->ostc = ostc_enable;
+		p->tstamp_lo = (u32) tstamp;
+		p->tstamp_hi = (u32) (tstamp>>32);
+	}
+}
+/* Close TX context descriptor */
+static void sxgbe_tx_ctxt_desc_close(struct sxgbe_tx_ctxt_desc *p)
+{
+	p->own_bit = 1;
+}
+
+/* WB status of context descriptor */
+static int sxgbe_tx_ctxt_desc_get_cde(struct sxgbe_tx_ctxt_desc *p)
+{
+	return p->ctxt_desc_err;
+}
+
+/* DMA RX descriptor ring initialization */
+static void sxgbe_init_rx_desc(struct sxgbe_rx_norm_desc *p, int disable_rx_ic,
+			       int mode, int end)
+{
+	p->rdes23.rx_rd_des23.own_bit = 1;
+	if (disable_rx_ic)
+		p->rdes23.rx_rd_des23.int_on_com = disable_rx_ic;
+}
+
+/* Get RX own bit */
+static int sxgbe_get_rx_owner(struct sxgbe_rx_norm_desc *p)
+{
+	return p->rdes23.rx_rd_des23.own_bit;
+}
+
+/* Set RX own bit */
+static void sxgbe_set_rx_owner(struct sxgbe_rx_norm_desc *p)
+{
+	p->rdes23.rx_rd_des23.own_bit = 1;
+}
+
+/* Get the receive frame size */
+static int sxgbe_get_rx_frame_len(struct sxgbe_rx_norm_desc *p)
+{
+	return p->rdes23.rx_wb_des23.pkt_len;
+}
+
+/* Return first Descriptor status */
+static int sxgbe_get_rx_fd_status(struct sxgbe_rx_norm_desc *p)
+{
+	return p->rdes23.rx_wb_des23.first_desc;
+}
+
+/* Return Last Descriptor status */
+static int sxgbe_get_rx_ld_status(struct sxgbe_rx_norm_desc *p)
+{
+	return p->rdes23.rx_wb_des23.last_desc;
+}
+
+
+/* Return the RX status looking at the WB fields */
+static int sxgbe_rx_wbstatus(struct sxgbe_rx_norm_desc *p,
+			     struct sxgbe_extra_stats *x, int *checksum)
+{
+	int status = 0;
+
+	*checksum = CHECKSUM_UNNECESSARY;
+	if (p->rdes23.rx_wb_des23.err_summary) {
+		switch (p->rdes23.rx_wb_des23.err_l2_type) {
+		case RX_GMII_ERR:
+			status = -EINVAL;
+			x->rx_code_gmii_err++;
+			break;
+		case RX_WATCHDOG_ERR:
+			status = -EINVAL;
+			x->rx_watchdog_err++;
+			break;
+		case RX_CRC_ERR:
+			status = -EINVAL;
+			x->rx_crc_err++;
+			break;
+		case RX_GAINT_ERR:
+			status = -EINVAL;
+			x->rx_gaint_pkt_err++;
+			break;
+		case RX_IP_HDR_ERR:
+			*checksum = CHECKSUM_NONE;
+			x->ip_hdr_err++;
+			break;
+		case RX_PAYLOAD_ERR:
+			*checksum = CHECKSUM_NONE;
+			x->ip_payload_err++;
+			break;
+		case RX_OVERFLOW_ERR:
+			status = -EINVAL;
+			x->overflow_error++;
+			break;
+		default:
+			pr_err("Invalid Error type\n");
+			break;
+		}
+	} else {
+		switch (p->rdes23.rx_wb_des23.err_l2_type) {
+		case RX_LEN_PKT:
+			x->len_pkt++;
+			break;
+		case RX_MACCTL_PKT:
+			x->mac_ctl_pkt++;
+			break;
+		case RX_DCBCTL_PKT:
+			x->dcb_ctl_pkt++;
+			break;
+		case RX_ARP_PKT:
+			x->arp_pkt++;
+			break;
+		case RX_OAM_PKT:
+			x->oam_pkt++;
+			break;
+		case RX_UNTAG_PKT:
+			x->untag_okt++;
+			break;
+		case RX_OTHER_PKT:
+			x->other_pkt++;
+			break;
+		case RX_SVLAN_PKT:
+			x->svlan_tag_pkt++;
+			break;
+		case RX_CVLAN_PKT:
+			x->cvlan_tag_pkt++;
+			break;
+		case RX_DVLAN_OCVLAN_ICVLAN_PKT:
+			x->dvlan_ocvlan_icvlan_pkt++;
+			break;
+		case RX_DVLAN_OSVLAN_ISVLAN_PKT:
+			x->dvlan_osvlan_isvlan_pkt++;
+			break;
+		case RX_DVLAN_OSVLAN_ICVLAN_PKT:
+			x->dvlan_osvlan_icvlan_pkt++;
+			break;
+		case RX_DVLAN_OCVLAN_ISVLAN_PKT:
+			x->dvlan_ocvlan_icvlan_pkt++;
+			break;
+		default:
+			pr_err("Invalid L2 Packet type\n");
+			break;
+		}
+	}
+
+	/* L3/L4 Pkt type */
+	switch (p->rdes23.rx_wb_des23.layer34_pkt_type) {
+	case RX_NOT_IP_PKT:
+		x->not_ip_pkt++;
+		break;
+	case RX_IPV4_TCP_PKT:
+		x->ip4_tcp_pkt++;
+		break;
+	case RX_IPV4_UDP_PKT:
+		x->ip4_udp_pkt++;
+		break;
+	case RX_IPV4_ICMP_PKT:
+		x->ip4_icmp_pkt++;
+		break;
+	case RX_IPV4_UNKNOWN_PKT:
+		x->ip4_unknown_pkt++;
+		break;
+	case RX_IPV6_TCP_PKT:
+		x->ip6_tcp_pkt++;
+		break;
+	case RX_IPV6_UDP_PKT:
+		x->ip6_udp_pkt++;
+		break;
+	case RX_IPV6_ICMP_PKT:
+		x->ip6_icmp_pkt++;
+		break;
+	case RX_IPV6_UNKNOWN_PKT:
+		x->ip6_unknown_pkt++;
+		break;
+	default:
+		pr_err("Invalid L3/L4 Packet type\n");
+		break;
+	}
+
+	/* Filter */
+	if (p->rdes23.rx_wb_des23.vlan_filter_match)
+		x->vlan_filter_match++;
+
+	if (p->rdes23.rx_wb_des23.sa_filter_fail) {
+		status = -EINVAL;
+		x->sa_filter_fail++;
+	}
+	if (p->rdes23.rx_wb_des23.da_filter_fail) {
+		status = -EINVAL;
+		x->da_filter_fail++;
+	}
+	if (p->rdes23.rx_wb_des23.hash_filter_pass)
+		x->hash_filter_pass++;
+
+	if (p->rdes23.rx_wb_des23.l3_filter_match)
+		x->l3_filter_match++;
+
+	if (p->rdes23.rx_wb_des23.l4_filter_match)
+		x->l4_filter_match++;
+
+	return status;
+}
+
+/* Get own bit of context descriptor */
+static int sxgbe_get_rx_ctxt_owner(struct sxgbe_rx_ctxt_desc *p)
+{
+	return p->own_bit;
+}
+
+/* Set own bit for context descriptor */
+static void sxgbe_set_ctxt_rx_owner(struct sxgbe_rx_ctxt_desc *p)
+{
+	p->own_bit = 1;
+}
+
+
+/* Return the reception status looking at Context control information */
+static void sxgbe_rx_ctxt_wbstatus(struct sxgbe_rx_ctxt_desc *p,
+				   struct sxgbe_extra_stats *x)
+{
+	if (p->tstamp_dropped)
+		x->timestamp_dropped++;
+
+	/* ptp */
+	if (p->ptp_msgtype == RX_NO_PTP)
+		x->rx_msg_type_no_ptp++;
+	else if (p->ptp_msgtype == RX_PTP_SYNC)
+		x->rx_ptp_type_sync++;
+	else if (p->ptp_msgtype == RX_PTP_FOLLOW_UP)
+		x->rx_ptp_type_follow_up++;
+	else if (p->ptp_msgtype == RX_PTP_DELAY_REQ)
+		x->rx_ptp_type_delay_req++;
+	else if (p->ptp_msgtype == RX_PTP_DELAY_RESP)
+		x->rx_ptp_type_delay_resp++;
+	else if (p->ptp_msgtype == RX_PTP_PDELAY_REQ)
+		x->rx_ptp_type_pdelay_req++;
+	else if (p->ptp_msgtype == RX_PTP_PDELAY_RESP)
+		x->rx_ptp_type_pdelay_resp++;
+	else if (p->ptp_msgtype == RX_PTP_PDELAY_FOLLOW_UP)
+		x->rx_ptp_type_pdelay_follow_up++;
+	else if (p->ptp_msgtype == RX_PTP_ANNOUNCE)
+		x->rx_ptp_announce++;
+	else if (p->ptp_msgtype == RX_PTP_MGMT)
+		x->rx_ptp_mgmt++;
+	else if (p->ptp_msgtype == RX_PTP_SIGNAL)
+		x->rx_ptp_signal++;
+	else if (p->ptp_msgtype == RX_PTP_RESV_MSG)
+		x->rx_ptp_resv_msg_type++;
+}
+
+/* Get rx timestamp status */
+static int sxgbe_get_rx_ctxt_tstamp_status(struct sxgbe_rx_ctxt_desc *p)
+{
+	if ((p->tstamp_hi == 0xffffffff) && (p->tstamp_lo == 0xffffffff)) {
+		pr_err("Time stamp corrupted\n");
+		return 0;
+	}
+
+	return p->tstamp_available;
+}
+
+
+static u64 sxgbe_get_rx_timestamp(struct sxgbe_rx_ctxt_desc *p)
+{
+	u64 ns;
+
+	ns = p->tstamp_lo;
+	ns |= ((u64)p->tstamp_hi) << 32;
+
+	return ns;
+}
+
+static const struct sxgbe_desc_ops desc_ops = {
+	.init_tx_desc			= sxgbe_init_tx_desc,
+	.tx_desc_enable_tse		= sxgbe_tx_desc_enable_tse,
+	.prepare_tx_desc		= sxgbe_prepare_tx_desc,
+	.tx_vlanctl_desc		= sxgbe_tx_vlanctl_desc,
+	.set_tx_owner			= sxgbe_set_tx_owner,
+	.get_tx_owner			= sxgbe_get_tx_owner,
+	.close_tx_desc			= sxgbe_close_tx_desc,
+	.release_tx_desc		= sxgbe_release_tx_desc,
+	.clear_tx_ic			= sxgbe_clear_tx_ic,
+	.get_tx_ls			= sxgbe_get_tx_ls,
+	.get_tx_len			= sxgbe_get_tx_len,
+	.tx_enable_tstamp		= sxgbe_tx_enable_tstamp,
+	.get_tx_timestamp_status	= sxgbe_get_tx_timestamp_status,
+	.tx_ctxt_desc_set_ctxt		= sxgbe_tx_ctxt_desc_set_ctxt,
+	.tx_ctxt_desc_set_owner		= sxgbe_tx_ctxt_desc_set_owner,
+	.get_tx_ctxt_owner		= sxgbe_tx_ctxt_desc_get_owner,
+	.tx_ctxt_desc_set_mss		= sxgbe_tx_ctxt_desc_set_mss,
+	.tx_ctxt_desc_get_mss		= sxgbe_tx_ctxt_desc_get_mss,
+	.tx_ctxt_desc_set_tcmssv	= sxgbe_tx_ctxt_desc_set_tcmssv,
+	.tx_ctxt_desc_reset_ostc	= sxgbe_tx_ctxt_desc_reset_ostc,
+	.tx_ctxt_desc_set_ivlantag	= sxgbe_tx_ctxt_desc_set_ivlantag,
+	.tx_ctxt_desc_get_ivlantag	= sxgbe_tx_ctxt_desc_get_ivlantag,
+	.tx_ctxt_desc_set_vlantag	= sxgbe_tx_ctxt_desc_set_vlantag,
+	.tx_ctxt_desc_get_vlantag	= sxgbe_tx_ctxt_desc_get_vlantag,
+	.tx_ctxt_set_tstamp		= sxgbe_tx_ctxt_desc_set_tstamp,
+	.close_tx_ctxt_desc		= sxgbe_tx_ctxt_desc_close,
+	.get_tx_ctxt_cde		= sxgbe_tx_ctxt_desc_get_cde,
+	.init_rx_desc			= sxgbe_init_rx_desc,
+	.get_rx_owner			= sxgbe_get_rx_owner,
+	.set_rx_owner			= sxgbe_set_rx_owner,
+	.get_rx_frame_len		= sxgbe_get_rx_frame_len,
+	.get_rx_fd_status		= sxgbe_get_rx_fd_status,
+	.get_rx_ld_status		= sxgbe_get_rx_ld_status,
+	.rx_wbstatus			= sxgbe_rx_wbstatus,
+	.get_rx_ctxt_owner		= sxgbe_get_rx_ctxt_owner,
+	.set_rx_ctxt_owner		= sxgbe_set_ctxt_rx_owner,
+	.rx_ctxt_wbstatus		= sxgbe_rx_ctxt_wbstatus,
+	.get_rx_ctxt_tstamp_status	= sxgbe_get_rx_ctxt_tstamp_status,
+	.get_timestamp			= sxgbe_get_rx_timestamp,
+};
+
+const struct sxgbe_desc_ops *sxgbe_get_desc_ops(void)
+{
+	return &desc_ops;
+}
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.h b/drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.h
new file mode 100644
index 000000000000..2caef1ae1ac5
--- /dev/null
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.h
@@ -0,0 +1,298 @@
+/* 10G controller driver for Samsung SoCs
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Siva Reddy Kallam <siva.kallam@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __SXGBE_DESC_H__
+#define __SXGBE_DESC_H__
+
+#define SXGBE_DESC_SIZE_BYTES	16
+
+/* forward declaration */
+struct sxgbe_extra_stats;
+
+/* Transmit checksum insertion control */
+enum tdes_csum_insertion {
+	cic_disabled		= 0,	/* Checksum Insertion Control */
+	cic_only_ip		= 1,	/* Only IP header */
+	/* IP header but pseudoheader is not calculated */
+	cic_no_pseudoheader	= 2,
+	cic_full		= 3,	/* IP header and pseudoheader */
+};
+
+struct sxgbe_tx_norm_desc {
+	u64 tdes01; /* buf1 address */
+	union {
+		/* TX Read-Format Desc 2,3 */
+		struct {
+			/* TDES2 */
+			u32 buf1_size:14;
+			u32 vlan_tag_ctl:2;
+			u32 buf2_size:14;
+			u32 timestmp_enable:1;
+			u32 int_on_com:1;
+			/* TDES3 */
+			union {
+				u32 tcp_payload_len:18;
+				struct {
+					u32 total_pkt_len:15;
+					u32 reserved1:1;
+					u32 cksum_ctl:2;
+				} cksum_pktlen;
+			} tx_pkt_len;
+
+			u32 tse_bit:1;
+			u32 tcp_hdr_len:4;
+			u32 sa_insert_ctl:3;
+			u32 crc_pad_ctl:2;
+			u32 last_desc:1;
+			u32 first_desc:1;
+			u32 ctxt_bit:1;
+			u32 own_bit:1;
+		} tx_rd_des23;
+
+		/* tx write back Desc 2,3 */
+		struct {
+			/* WB TES2 */
+			u32 reserved1;
+			/* WB TES3 */
+			u32 reserved2:31;
+			u32 own_bit:1;
+		} tx_wb_des23;
+	} tdes23;
+};
+
+struct sxgbe_rx_norm_desc {
+	union {
+		u32 rdes0; /* buf1 address */
+		struct {
+			u32 out_vlan_tag:16;
+			u32 in_vlan_tag:16;
+		} wb_rx_des0;
+	} rd_wb_des0;
+
+	union {
+		u32 rdes1;	/* buf2 address or buf1[63:32] */
+		u32 rss_hash;	/* Write-back RX */
+	} rd_wb_des1;
+
+	union {
+		/* RX Read format Desc 2,3 */
+		struct{
+			/* RDES2 */
+			u32 buf2_addr;
+			/* RDES3 */
+			u32 buf2_hi_addr:30;
+			u32 int_on_com:1;
+			u32 own_bit:1;
+		} rx_rd_des23;
+
+		/* RX write back */
+		struct{
+			/* WB RDES2 */
+			u32 hdr_len:10;
+			u32 rdes2_reserved:2;
+			u32 elrd_val:1;
+			u32 iovt_sel:1;
+			u32 res_pkt:1;
+			u32 vlan_filter_match:1;
+			u32 sa_filter_fail:1;
+			u32 da_filter_fail:1;
+			u32 hash_filter_pass:1;
+			u32 macaddr_filter_match:8;
+			u32 l3_filter_match:1;
+			u32 l4_filter_match:1;
+			u32 l34_filter_num:3;
+
+			/* WB RDES3 */
+			u32 pkt_len:14;
+			u32 rdes3_reserved:1;
+			u32 err_summary:15;
+			u32 err_l2_type:4;
+			u32 layer34_pkt_type:4;
+			u32 no_coagulation_pkt:1;
+			u32 in_seq_pkt:1;
+			u32 rss_valid:1;
+			u32 context_des_avail:1;
+			u32 last_desc:1;
+			u32 first_desc:1;
+			u32 recv_context_desc:1;
+			u32 own_bit:1;
+		} rx_wb_des23;
+	} rdes23;
+};
+
+/* Context descriptor structure */
+struct sxgbe_tx_ctxt_desc {
+	u32 tstamp_lo;
+	u32 tstamp_hi;
+	u32 maxseg_size:15;
+	u32 reserved1:1;
+	u32 ivlan_tag:16;
+	u32 vlan_tag:16;
+	u32 vltag_valid:1;
+	u32 ivlan_tag_valid:1;
+	u32 ivlan_tag_ctl:2;
+	u32 reserved2:3;
+	u32 ctxt_desc_err:1;
+	u32 reserved3:2;
+	u32 ostc:1;
+	u32 tcmssv:1;
+	u32 reserved4:2;
+	u32 ctxt_bit:1;
+	u32 own_bit:1;
+};
+
+struct sxgbe_rx_ctxt_desc {
+	u32 tstamp_lo;
+	u32 tstamp_hi;
+	u32 reserved1;
+	u32 ptp_msgtype:4;
+	u32 tstamp_available:1;
+	u32 ptp_rsp_err:1;
+	u32 tstamp_dropped:1;
+	u32 reserved2:23;
+	u32 rx_ctxt_desc:1;
+	u32 own_bit:1;
+};
+
+struct sxgbe_desc_ops {
+	/* DMA TX descriptor ring initialization */
+	void (*init_tx_desc)(struct sxgbe_tx_norm_desc *p);
+
+	/* Invoked by the xmit function to prepare the tx descriptor */
+	void (*tx_desc_enable_tse)(struct sxgbe_tx_norm_desc *p, u8 is_tse,
+				   u32 total_hdr_len, u32 payload_len,
+				   u32 tcp_payload_len);
+
+	/* Assign buffer lengths for descriptor */
+	void (*prepare_tx_desc)(struct sxgbe_tx_norm_desc *p, u8 is_fd,
+				int buf1_len, int pkt_len, int cksum);
+
+	/* Set VLAN control information */
+	void (*tx_vlanctl_desc)(struct sxgbe_tx_norm_desc *p, int vlan_ctl);
+
+	/* Set the owner of the descriptor */
+	void (*set_tx_owner)(struct sxgbe_tx_norm_desc *p);
+
+	/* Get the owner of the descriptor */
+	int (*get_tx_owner)(struct sxgbe_tx_norm_desc *p);
+
+	/* Invoked by the xmit function to close the tx descriptor */
+	void (*close_tx_desc)(struct sxgbe_tx_norm_desc *p);
+
+	/* Clean the tx descriptor as soon as the tx irq is received */
+	void (*release_tx_desc)(struct sxgbe_tx_norm_desc *p);
+
+	/* Clear interrupt on tx frame completion. When this bit is
+	 * set an interrupt happens as soon as the frame is transmitted
+	 */
+	void (*clear_tx_ic)(struct sxgbe_tx_norm_desc *p);
+
+	/* Last tx segment reports the transmit status */
+	int (*get_tx_ls)(struct sxgbe_tx_norm_desc *p);
+
+	/* Get the buffer size from the descriptor */
+	int (*get_tx_len)(struct sxgbe_tx_norm_desc *p);
+
+	/* Set tx timestamp enable bit */
+	void (*tx_enable_tstamp)(struct sxgbe_tx_norm_desc *p);
+
+	/* get tx timestamp status */
+	int (*get_tx_timestamp_status)(struct sxgbe_tx_norm_desc *p);
+
+	/* TX Context Descripto Specific */
+	void (*tx_ctxt_desc_set_ctxt)(struct sxgbe_tx_ctxt_desc *p);
+
+	/* Set the owner of the TX context descriptor */
+	void (*tx_ctxt_desc_set_owner)(struct sxgbe_tx_ctxt_desc *p);
+
+	/* Get the owner of the TX context descriptor */
+	int (*get_tx_ctxt_owner)(struct sxgbe_tx_ctxt_desc *p);
+
+	/* Set TX mss */
+	void (*tx_ctxt_desc_set_mss)(struct sxgbe_tx_ctxt_desc *p, int mss);
+
+	/* Set TX mss */
+	int (*tx_ctxt_desc_get_mss)(struct sxgbe_tx_ctxt_desc *p);
+
+	/* Set TX tcmssv */
+	void (*tx_ctxt_desc_set_tcmssv)(struct sxgbe_tx_ctxt_desc *p);
+
+	/* Reset TX ostc */
+	void (*tx_ctxt_desc_reset_ostc)(struct sxgbe_tx_ctxt_desc *p);
+
+	/* Set IVLAN information */
+	void (*tx_ctxt_desc_set_ivlantag)(struct sxgbe_tx_ctxt_desc *p,
+					  int is_ivlanvalid, int ivlan_tag,
+					  int ivlan_ctl);
+
+	/* Return IVLAN Tag */
+	int (*tx_ctxt_desc_get_ivlantag)(struct sxgbe_tx_ctxt_desc *p);
+
+	/* Set VLAN Tag */
+	void (*tx_ctxt_desc_set_vlantag)(struct sxgbe_tx_ctxt_desc *p,
+					 int is_vlanvalid, int vlan_tag);
+
+	/* Return VLAN Tag */
+	int (*tx_ctxt_desc_get_vlantag)(struct sxgbe_tx_ctxt_desc *p);
+
+	/* Set Time stamp */
+	void (*tx_ctxt_set_tstamp)(struct sxgbe_tx_ctxt_desc *p,
+				   u8 ostc_enable, u64 tstamp);
+
+	/* Close TX context descriptor */
+	void (*close_tx_ctxt_desc)(struct sxgbe_tx_ctxt_desc *p);
+
+	/* WB status of context descriptor */
+	int (*get_tx_ctxt_cde)(struct sxgbe_tx_ctxt_desc *p);
+
+	/* DMA RX descriptor ring initialization */
+	void (*init_rx_desc)(struct sxgbe_rx_norm_desc *p, int disable_rx_ic,
+			     int mode, int end);
+
+	/* Get own bit */
+	int (*get_rx_owner)(struct sxgbe_rx_norm_desc *p);
+
+	/* Set own bit */
+	void (*set_rx_owner)(struct sxgbe_rx_norm_desc *p);
+
+	/* Get the receive frame size */
+	int (*get_rx_frame_len)(struct sxgbe_rx_norm_desc *p);
+
+	/* Return first Descriptor status */
+	int (*get_rx_fd_status)(struct sxgbe_rx_norm_desc *p);
+
+	/* Return first Descriptor status */
+	int (*get_rx_ld_status)(struct sxgbe_rx_norm_desc *p);
+
+	/* Return the reception status looking at the RDES1 */
+	int (*rx_wbstatus)(struct sxgbe_rx_norm_desc *p,
+			   struct sxgbe_extra_stats *x, int *checksum);
+
+	/* Get own bit */
+	int (*get_rx_ctxt_owner)(struct sxgbe_rx_ctxt_desc *p);
+
+	/* Set own bit */
+	void (*set_rx_ctxt_owner)(struct sxgbe_rx_ctxt_desc *p);
+
+	/* Return the reception status looking at Context control information */
+	void (*rx_ctxt_wbstatus)(struct sxgbe_rx_ctxt_desc *p,
+				 struct sxgbe_extra_stats *x);
+
+	/* Get rx timestamp status */
+	int (*get_rx_ctxt_tstamp_status)(struct sxgbe_rx_ctxt_desc *p);
+
+	/* Get timestamp value for rx, need to check this */
+	u64 (*get_timestamp)(struct sxgbe_rx_ctxt_desc *p);
+};
+
+const struct sxgbe_desc_ops *sxgbe_get_desc_ops(void);
+
+#endif /* __SXGBE_DESC_H__ */
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.c
new file mode 100644
index 000000000000..59d2d3976277
--- /dev/null
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.c
@@ -0,0 +1,372 @@
+/* 10G controller driver for Samsung SoCs
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Siva Reddy Kallam <siva.kallam@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/io.h>
+#include <linux/netdevice.h>
+#include <linux/phy.h>
+
+#include "sxgbe_common.h"
+#include "sxgbe_dma.h"
+#include "sxgbe_reg.h"
+#include "sxgbe_desc.h"
+
+/* DMA core initialization */
+static int sxgbe_dma_init(void __iomem *ioaddr, int fix_burst, int burst_map)
+{
+	int retry_count = 10;
+	u32 reg_val;
+
+	/* reset the DMA */
+	writel(SXGBE_DMA_SOFT_RESET, ioaddr + SXGBE_DMA_MODE_REG);
+	while (retry_count--) {
+		if (!(readl(ioaddr + SXGBE_DMA_MODE_REG) &
+		      SXGBE_DMA_SOFT_RESET))
+			break;
+		mdelay(10);
+	}
+
+	if (retry_count < 0)
+		return -EBUSY;
+
+	reg_val = readl(ioaddr + SXGBE_DMA_SYSBUS_MODE_REG);
+
+	/* if fix_burst = 0, Set UNDEF = 1 of DMA_Sys_Mode Register.
+	 * if fix_burst = 1, Set UNDEF = 0 of DMA_Sys_Mode Register.
+	 * burst_map is bitmap for  BLEN[4, 8, 16, 32, 64, 128 and 256].
+	 * Set burst_map irrespective of fix_burst value.
+	 */
+	if (!fix_burst)
+		reg_val |= SXGBE_DMA_AXI_UNDEF_BURST;
+
+	/* write burst len map */
+	reg_val |= (burst_map << SXGBE_DMA_BLENMAP_LSHIFT);
+
+	writel(reg_val,	ioaddr + SXGBE_DMA_SYSBUS_MODE_REG);
+
+	return 0;
+}
+
+static void sxgbe_dma_channel_init(void __iomem *ioaddr, int cha_num,
+				   int fix_burst, int pbl, dma_addr_t dma_tx,
+				   dma_addr_t dma_rx, int t_rsize, int r_rsize)
+{
+	u32 reg_val;
+	dma_addr_t dma_addr;
+
+	reg_val = readl(ioaddr + SXGBE_DMA_CHA_CTL_REG(cha_num));
+	/* set the pbl */
+	if (fix_burst) {
+		reg_val |= SXGBE_DMA_PBL_X8MODE;
+		writel(reg_val, ioaddr + SXGBE_DMA_CHA_CTL_REG(cha_num));
+		/* program the TX pbl */
+		reg_val = readl(ioaddr + SXGBE_DMA_CHA_TXCTL_REG(cha_num));
+		reg_val |= (pbl << SXGBE_DMA_TXPBL_LSHIFT);
+		writel(reg_val, ioaddr + SXGBE_DMA_CHA_TXCTL_REG(cha_num));
+		/* program the RX pbl */
+		reg_val = readl(ioaddr + SXGBE_DMA_CHA_RXCTL_REG(cha_num));
+		reg_val |= (pbl << SXGBE_DMA_RXPBL_LSHIFT);
+		writel(reg_val, ioaddr + SXGBE_DMA_CHA_RXCTL_REG(cha_num));
+	}
+
+	/* program desc registers */
+	writel(upper_32_bits(dma_tx),
+	       ioaddr + SXGBE_DMA_CHA_TXDESC_HADD_REG(cha_num));
+	writel(lower_32_bits(dma_tx),
+	       ioaddr + SXGBE_DMA_CHA_TXDESC_LADD_REG(cha_num));
+
+	writel(upper_32_bits(dma_rx),
+	       ioaddr + SXGBE_DMA_CHA_RXDESC_HADD_REG(cha_num));
+	writel(lower_32_bits(dma_rx),
+	       ioaddr + SXGBE_DMA_CHA_RXDESC_LADD_REG(cha_num));
+
+	/* program tail pointers */
+	/* assumption: upper 32 bits are constant and
+	 * same as TX/RX desc list
+	 */
+	dma_addr = dma_tx + ((t_rsize - 1) * SXGBE_DESC_SIZE_BYTES);
+	writel(lower_32_bits(dma_addr),
+	       ioaddr + SXGBE_DMA_CHA_TXDESC_TAILPTR_REG(cha_num));
+
+	dma_addr = dma_rx + ((r_rsize - 1) * SXGBE_DESC_SIZE_BYTES);
+	writel(lower_32_bits(dma_addr),
+	       ioaddr + SXGBE_DMA_CHA_RXDESC_LADD_REG(cha_num));
+	/* program the ring sizes */
+	writel(t_rsize - 1, ioaddr + SXGBE_DMA_CHA_TXDESC_RINGLEN_REG(cha_num));
+	writel(r_rsize - 1, ioaddr + SXGBE_DMA_CHA_RXDESC_RINGLEN_REG(cha_num));
+
+	/* Enable TX/RX interrupts */
+	writel(SXGBE_DMA_ENA_INT,
+	       ioaddr + SXGBE_DMA_CHA_INT_ENABLE_REG(cha_num));
+}
+
+static void sxgbe_enable_dma_transmission(void __iomem *ioaddr, int cha_num)
+{
+	u32 tx_config;
+
+	tx_config = readl(ioaddr + SXGBE_DMA_CHA_TXCTL_REG(cha_num));
+	tx_config |= SXGBE_TX_START_DMA;
+	writel(tx_config, ioaddr + SXGBE_DMA_CHA_TXCTL_REG(cha_num));
+}
+
+static void sxgbe_enable_dma_irq(void __iomem *ioaddr, int dma_cnum)
+{
+	/* Enable TX/RX interrupts */
+	writel(SXGBE_DMA_ENA_INT,
+	       ioaddr + SXGBE_DMA_CHA_INT_ENABLE_REG(dma_cnum));
+}
+
+static void sxgbe_disable_dma_irq(void __iomem *ioaddr, int dma_cnum)
+{
+	/* Disable TX/RX interrupts */
+	writel(0, ioaddr + SXGBE_DMA_CHA_INT_ENABLE_REG(dma_cnum));
+}
+
+static void sxgbe_dma_start_tx(void __iomem *ioaddr, int tchannels)
+{
+	int cnum;
+	u32 tx_ctl_reg;
+
+	for (cnum = 0; cnum < tchannels; cnum++) {
+		tx_ctl_reg = readl(ioaddr + SXGBE_DMA_CHA_TXCTL_REG(cnum));
+		tx_ctl_reg |= SXGBE_TX_ENABLE;
+		writel(tx_ctl_reg,
+		       ioaddr + SXGBE_DMA_CHA_TXCTL_REG(cnum));
+	}
+}
+
+static void sxgbe_dma_start_tx_queue(void __iomem *ioaddr, int dma_cnum)
+{
+	u32 tx_ctl_reg;
+
+	tx_ctl_reg = readl(ioaddr + SXGBE_DMA_CHA_TXCTL_REG(dma_cnum));
+	tx_ctl_reg |= SXGBE_TX_ENABLE;
+	writel(tx_ctl_reg, ioaddr + SXGBE_DMA_CHA_TXCTL_REG(dma_cnum));
+}
+
+static void sxgbe_dma_stop_tx_queue(void __iomem *ioaddr, int dma_cnum)
+{
+	u32 tx_ctl_reg;
+
+	tx_ctl_reg = readl(ioaddr + SXGBE_DMA_CHA_TXCTL_REG(dma_cnum));
+	tx_ctl_reg &= ~(SXGBE_TX_ENABLE);
+	writel(tx_ctl_reg, ioaddr + SXGBE_DMA_CHA_TXCTL_REG(dma_cnum));
+}
+
+static void sxgbe_dma_stop_tx(void __iomem *ioaddr, int tchannels)
+{
+	int cnum;
+	u32 tx_ctl_reg;
+
+	for (cnum = 0; cnum < tchannels; cnum++) {
+		tx_ctl_reg = readl(ioaddr + SXGBE_DMA_CHA_TXCTL_REG(cnum));
+		tx_ctl_reg &= ~(SXGBE_TX_ENABLE);
+		writel(tx_ctl_reg, ioaddr + SXGBE_DMA_CHA_TXCTL_REG(cnum));
+	}
+}
+
+static void sxgbe_dma_start_rx(void __iomem *ioaddr, int rchannels)
+{
+	int cnum;
+	u32 rx_ctl_reg;
+
+	for (cnum = 0; cnum < rchannels; cnum++) {
+		rx_ctl_reg = readl(ioaddr + SXGBE_DMA_CHA_RXCTL_REG(cnum));
+		rx_ctl_reg |= SXGBE_RX_ENABLE;
+		writel(rx_ctl_reg,
+		       ioaddr + SXGBE_DMA_CHA_RXCTL_REG(cnum));
+	}
+}
+
+static void sxgbe_dma_stop_rx(void __iomem *ioaddr, int rchannels)
+{
+	int cnum;
+	u32 rx_ctl_reg;
+
+	for (cnum = 0; cnum < rchannels; cnum++) {
+		rx_ctl_reg = readl(ioaddr + SXGBE_DMA_CHA_RXCTL_REG(cnum));
+		rx_ctl_reg &= ~(SXGBE_RX_ENABLE);
+		writel(rx_ctl_reg, ioaddr + SXGBE_DMA_CHA_RXCTL_REG(cnum));
+	}
+}
+
+static int sxgbe_tx_dma_int_status(void __iomem *ioaddr, int channel_no,
+				   struct sxgbe_extra_stats *x)
+{
+	u32 int_status = readl(ioaddr + SXGBE_DMA_CHA_STATUS_REG(channel_no));
+	u32 clear_val = 0;
+	u32 ret_val = 0;
+
+	/* TX Normal Interrupt Summary */
+	if (likely(int_status & SXGBE_DMA_INT_STATUS_NIS)) {
+		x->normal_irq_n++;
+		if (int_status & SXGBE_DMA_INT_STATUS_TI) {
+			ret_val |= handle_tx;
+			x->tx_normal_irq_n++;
+			clear_val |= SXGBE_DMA_INT_STATUS_TI;
+		}
+
+		if (int_status & SXGBE_DMA_INT_STATUS_TBU) {
+			x->tx_underflow_irq++;
+			ret_val |= tx_bump_tc;
+			clear_val |= SXGBE_DMA_INT_STATUS_TBU;
+		}
+	} else if (unlikely(int_status & SXGBE_DMA_INT_STATUS_AIS)) {
+		/* TX Abnormal Interrupt Summary */
+		if (int_status & SXGBE_DMA_INT_STATUS_TPS) {
+			ret_val |= tx_hard_error;
+			clear_val |= SXGBE_DMA_INT_STATUS_TPS;
+			x->tx_process_stopped_irq++;
+		}
+
+		if (int_status & SXGBE_DMA_INT_STATUS_FBE) {
+			ret_val |= tx_hard_error;
+			x->fatal_bus_error_irq++;
+
+			/* Assumption: FBE bit is the combination of
+			 * all the bus access erros and cleared when
+			 * the respective error bits cleared
+			 */
+
+			/* check for actual cause */
+			if (int_status & SXGBE_DMA_INT_STATUS_TEB0) {
+				x->tx_read_transfer_err++;
+				clear_val |= SXGBE_DMA_INT_STATUS_TEB0;
+			} else {
+				x->tx_write_transfer_err++;
+			}
+
+			if (int_status & SXGBE_DMA_INT_STATUS_TEB1) {
+				x->tx_desc_access_err++;
+				clear_val |= SXGBE_DMA_INT_STATUS_TEB1;
+			} else {
+				x->tx_buffer_access_err++;
+			}
+
+			if (int_status & SXGBE_DMA_INT_STATUS_TEB2) {
+				x->tx_data_transfer_err++;
+				clear_val |= SXGBE_DMA_INT_STATUS_TEB2;
+			}
+		}
+
+		/* context descriptor error */
+		if (int_status & SXGBE_DMA_INT_STATUS_CTXTERR) {
+			x->tx_ctxt_desc_err++;
+			clear_val |= SXGBE_DMA_INT_STATUS_CTXTERR;
+		}
+	}
+
+	/* clear the served bits */
+	writel(clear_val, ioaddr + SXGBE_DMA_CHA_STATUS_REG(channel_no));
+
+	return ret_val;
+}
+
+static int sxgbe_rx_dma_int_status(void __iomem *ioaddr, int channel_no,
+				   struct sxgbe_extra_stats *x)
+{
+	u32 int_status = readl(ioaddr + SXGBE_DMA_CHA_STATUS_REG(channel_no));
+	u32 clear_val = 0;
+	u32 ret_val = 0;
+
+	/* RX Normal Interrupt Summary */
+	if (likely(int_status & SXGBE_DMA_INT_STATUS_NIS)) {
+		x->normal_irq_n++;
+		if (int_status & SXGBE_DMA_INT_STATUS_RI) {
+			ret_val |= handle_rx;
+			x->rx_normal_irq_n++;
+			clear_val |= SXGBE_DMA_INT_STATUS_RI;
+		}
+	} else if (unlikely(int_status & SXGBE_DMA_INT_STATUS_AIS)) {
+		/* RX Abnormal Interrupt Summary */
+		if (int_status & SXGBE_DMA_INT_STATUS_RBU) {
+			ret_val |= rx_bump_tc;
+			clear_val |= SXGBE_DMA_INT_STATUS_RBU;
+			x->rx_underflow_irq++;
+		}
+
+		if (int_status & SXGBE_DMA_INT_STATUS_RPS) {
+			ret_val |= rx_hard_error;
+			clear_val |= SXGBE_DMA_INT_STATUS_RPS;
+			x->rx_process_stopped_irq++;
+		}
+
+		if (int_status & SXGBE_DMA_INT_STATUS_FBE) {
+			ret_val |= rx_hard_error;
+			x->fatal_bus_error_irq++;
+
+			/* Assumption: FBE bit is the combination of
+			 * all the bus access erros and cleared when
+			 * the respective error bits cleared
+			 */
+
+			/* check for actual cause */
+			if (int_status & SXGBE_DMA_INT_STATUS_REB0) {
+				x->rx_read_transfer_err++;
+				clear_val |= SXGBE_DMA_INT_STATUS_REB0;
+			} else {
+				x->rx_write_transfer_err++;
+			}
+
+			if (int_status & SXGBE_DMA_INT_STATUS_REB1) {
+				x->rx_desc_access_err++;
+				clear_val |= SXGBE_DMA_INT_STATUS_REB1;
+			} else {
+				x->rx_buffer_access_err++;
+			}
+
+			if (int_status & SXGBE_DMA_INT_STATUS_REB2) {
+				x->rx_data_transfer_err++;
+				clear_val |= SXGBE_DMA_INT_STATUS_REB2;
+			}
+		}
+	}
+
+	/* clear the served bits */
+	writel(clear_val, ioaddr + SXGBE_DMA_CHA_STATUS_REG(channel_no));
+
+	return ret_val;
+}
+
+/* Program the HW RX Watchdog */
+static void sxgbe_dma_rx_watchdog(void __iomem *ioaddr, u32 riwt)
+{
+	u32 que_num;
+
+	SXGBE_FOR_EACH_QUEUE(SXGBE_RX_QUEUES, que_num) {
+		writel(riwt,
+		       ioaddr + SXGBE_DMA_CHA_INT_RXWATCHTMR_REG(que_num));
+	}
+}
+
+static const struct sxgbe_dma_ops sxgbe_dma_ops = {
+	.init				= sxgbe_dma_init,
+	.cha_init			= sxgbe_dma_channel_init,
+	.enable_dma_transmission	= sxgbe_enable_dma_transmission,
+	.enable_dma_irq			= sxgbe_enable_dma_irq,
+	.disable_dma_irq		= sxgbe_disable_dma_irq,
+	.start_tx			= sxgbe_dma_start_tx,
+	.start_tx_queue			= sxgbe_dma_start_tx_queue,
+	.stop_tx			= sxgbe_dma_stop_tx,
+	.stop_tx_queue			= sxgbe_dma_stop_tx_queue,
+	.start_rx			= sxgbe_dma_start_rx,
+	.stop_rx			= sxgbe_dma_stop_rx,
+	.tx_dma_int_status		= sxgbe_tx_dma_int_status,
+	.rx_dma_int_status		= sxgbe_rx_dma_int_status,
+	.rx_watchdog			= sxgbe_dma_rx_watchdog,
+};
+
+const struct sxgbe_dma_ops *sxgbe_get_dma_ops(void)
+{
+	return &sxgbe_dma_ops;
+}
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.h b/drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.h
new file mode 100644
index 000000000000..bbf167efb60c
--- /dev/null
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.h
@@ -0,0 +1,48 @@
+/* 10G controller driver for Samsung SoCs
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Siva Reddy Kallam <siva.kallam@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __SXGBE_DMA_H__
+#define __SXGBE_DMA_H__
+
+/* forward declaration */
+struct sxgbe_extra_stats;
+
+#define SXGBE_DMA_BLENMAP_LSHIFT	1
+#define SXGBE_DMA_TXPBL_LSHIFT		16
+#define SXGBE_DMA_RXPBL_LSHIFT		16
+#define DEFAULT_DMA_PBL			8
+
+struct sxgbe_dma_ops {
+	/* DMA core initialization */
+	int (*init)(void __iomem *ioaddr, int fix_burst, int burst_map);
+	void (*cha_init)(void __iomem *ioaddr, int cha_num, int fix_burst,
+			 int pbl, dma_addr_t dma_tx, dma_addr_t dma_rx,
+			 int t_rzie, int r_rsize);
+	void (*enable_dma_transmission)(void __iomem *ioaddr, int dma_cnum);
+	void (*enable_dma_irq)(void __iomem *ioaddr, int dma_cnum);
+	void (*disable_dma_irq)(void __iomem *ioaddr, int dma_cnum);
+	void (*start_tx)(void __iomem *ioaddr, int tchannels);
+	void (*start_tx_queue)(void __iomem *ioaddr, int dma_cnum);
+	void (*stop_tx)(void __iomem *ioaddr, int tchannels);
+	void (*stop_tx_queue)(void __iomem *ioaddr, int dma_cnum);
+	void (*start_rx)(void __iomem *ioaddr, int rchannels);
+	void (*stop_rx)(void __iomem *ioaddr, int rchannels);
+	int (*tx_dma_int_status)(void __iomem *ioaddr, int channel_no,
+				 struct sxgbe_extra_stats *x);
+	int (*rx_dma_int_status)(void __iomem *ioaddr, int channel_no,
+				 struct sxgbe_extra_stats *x);
+	/* Program the HW RX Watchdog */
+	void (*rx_watchdog)(void __iomem *ioaddr, u32 riwt);
+};
+
+const struct sxgbe_dma_ops *sxgbe_get_dma_ops(void);
+
+#endif /* __SXGBE_CORE_H__ */
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_ethtool.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_ethtool.c
new file mode 100644
index 000000000000..1dce2b2e045b
--- /dev/null
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_ethtool.c
@@ -0,0 +1,44 @@
+/* 10G controller driver for Samsung SoCs
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Siva Reddy Kallam <siva.kallam@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/phy.h>
+
+#include "sxgbe_common.h"
+
+struct sxgbe_stats {
+	char stat_string[ETH_GSTRING_LEN];
+	int sizeof_stat;
+	int stat_offset;
+};
+
+#define SXGBE_STAT(m)						\
+{								\
+	#m,							\
+	FIELD_SIZEOF(struct sxgbe_extra_stats, m),		\
+	offsetof(struct sxgbe_priv_data, xstats.m)		\
+}
+
+static const struct sxgbe_stats sxgbe_gstrings_stats[] = {
+};
+#define SXGBE_STATS_LEN ARRAY_SIZE(sxgbe_gstrings_stats)
+
+static const struct ethtool_ops sxgbe_ethtool_ops = {
+};
+
+void sxgbe_set_ethtool_ops(struct net_device *netdev)
+{
+	SET_ETHTOOL_OPS(netdev, &sxgbe_ethtool_ops);
+}
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
new file mode 100644
index 000000000000..75ba57cfe7c0
--- /dev/null
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
@@ -0,0 +1,2052 @@
+/* 10G controller driver for Samsung SoCs
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Siva Reddy Kallam <siva.kallam@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/clk.h>
+#include <linux/crc32.h>
+#include <linux/dma-mapping.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/if.h>
+#include <linux/if_ether.h>
+#include <linux/if_vlan.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ip.h>
+#include <linux/kernel.h>
+#include <linux/mii.h>
+#include <linux/module.h>
+#include <linux/net_tstamp.h>
+#include <linux/netdevice.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <linux/prefetch.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
+#include <linux/tcp.h>
+#include <linux/sxgbe_platform.h>
+
+#include "sxgbe_common.h"
+#include "sxgbe_desc.h"
+#include "sxgbe_dma.h"
+#include "sxgbe_mtl.h"
+#include "sxgbe_reg.h"
+
+#define SXGBE_ALIGN(x)	L1_CACHE_ALIGN(x)
+#define JUMBO_LEN	9000
+
+/* Module parameters */
+#define TX_TIMEO	5000
+#define DMA_TX_SIZE	512
+#define DMA_RX_SIZE	1024
+#define TC_DEFAULT	64
+#define DMA_BUFFER_SIZE	BUF_SIZE_2KiB
+/* The default timer value as per the sxgbe specification 1 sec(1000 ms) */
+#define SXGBE_DEFAULT_LPI_TIMER	1000
+
+static int debug = -1;
+
+module_param(debug, int, S_IRUGO | S_IWUSR);
+static const u32 default_msg_level = (NETIF_MSG_DRV | NETIF_MSG_PROBE |
+				      NETIF_MSG_LINK | NETIF_MSG_IFUP |
+				      NETIF_MSG_IFDOWN | NETIF_MSG_TIMER);
+
+static irqreturn_t sxgbe_common_interrupt(int irq, void *dev_id);
+static irqreturn_t sxgbe_tx_interrupt(int irq, void *dev_id);
+static irqreturn_t sxgbe_rx_interrupt(int irq, void *dev_id);
+
+#define SXGBE_COAL_TIMER(x) (jiffies + usecs_to_jiffies(x))
+
+/**
+ * sxgbe_clk_csr_set - dynamically set the MDC clock
+ * @priv: driver private structure
+ * Description: this is to dynamically set the MDC clock according to the csr
+ * clock input.
+ */
+static void sxgbe_clk_csr_set(struct sxgbe_priv_data *priv)
+{
+	u32 clk_rate = clk_get_rate(priv->sxgbe_clk);
+
+	/* assign the proper divider, this will be used during
+	 * mdio communication
+	 */
+	if (clk_rate < SXGBE_CSR_F_150M)
+		priv->clk_csr = SXGBE_CSR_100_150M;
+	else if (clk_rate <= SXGBE_CSR_F_250M)
+		priv->clk_csr = SXGBE_CSR_150_250M;
+	else if (clk_rate <= SXGBE_CSR_F_300M)
+		priv->clk_csr = SXGBE_CSR_250_300M;
+	else if (clk_rate <= SXGBE_CSR_F_350M)
+		priv->clk_csr = SXGBE_CSR_300_350M;
+	else if (clk_rate <= SXGBE_CSR_F_400M)
+		priv->clk_csr = SXGBE_CSR_350_400M;
+	else if (clk_rate <= SXGBE_CSR_F_500M)
+		priv->clk_csr = SXGBE_CSR_400_500M;
+}
+
+/* minimum number of free TX descriptors required to wake up TX process */
+#define SXGBE_TX_THRESH(x)	(x->dma_tx_size/4)
+
+static inline u32 sxgbe_tx_avail(struct sxgbe_tx_queue *queue, int tx_qsize)
+{
+	return queue->dirty_tx + tx_qsize - queue->cur_tx - 1;
+}
+
+/**
+ * sxgbe_adjust_link
+ * @dev: net device structure
+ * Description: it adjusts the link parameters.
+ */
+static void sxgbe_adjust_link(struct net_device *dev)
+{
+	struct sxgbe_priv_data *priv = netdev_priv(dev);
+	struct phy_device *phydev = priv->phydev;
+	u8 new_state = 0;
+	u8 speed = 0xff;
+
+	if (!phydev)
+		return;
+
+	/* SXGBE is not supporting auto-negotiation and
+	 * half duplex mode. so, not handling duplex change
+	 * in this function. only handling speed and link status
+	 */
+	if (phydev->link) {
+		if (phydev->speed != priv->speed) {
+			new_state = 1;
+			switch (phydev->speed) {
+			case SPEED_10000:
+				speed = SXGBE_SPEED_10G;
+				break;
+			case SPEED_2500:
+				speed = SXGBE_SPEED_2_5G;
+				break;
+			case SPEED_1000:
+				speed = SXGBE_SPEED_1G;
+				break;
+			default:
+				netif_err(priv, link, dev,
+					  "Speed (%d) not supported\n",
+					  phydev->speed);
+			}
+
+			priv->speed = phydev->speed;
+			priv->hw->mac->set_speed(priv->ioaddr, speed);
+		}
+
+		if (!priv->oldlink) {
+			new_state = 1;
+			priv->oldlink = 1;
+		}
+	} else if (priv->oldlink) {
+		new_state = 1;
+		priv->oldlink = 0;
+		priv->speed = SPEED_UNKNOWN;
+	}
+
+	if (new_state & netif_msg_link(priv))
+		phy_print_status(phydev);
+}
+
+/**
+ * sxgbe_init_phy - PHY initialization
+ * @dev: net device structure
+ * Description: it initializes the driver's PHY state, and attaches the PHY
+ * to the mac driver.
+ *  Return value:
+ *  0 on success
+ */
+static int sxgbe_init_phy(struct net_device *ndev)
+{
+	char phy_id_fmt[MII_BUS_ID_SIZE + 3];
+	char bus_id[MII_BUS_ID_SIZE];
+	struct phy_device *phydev;
+	struct sxgbe_priv_data *priv = netdev_priv(ndev);
+	int phy_iface = priv->plat->interface;
+
+	/* assign default link status */
+	priv->oldlink = 0;
+	priv->speed = SPEED_UNKNOWN;
+	priv->oldduplex = DUPLEX_UNKNOWN;
+
+	if (priv->plat->phy_bus_name)
+		snprintf(bus_id, MII_BUS_ID_SIZE, "%s-%x",
+			 priv->plat->phy_bus_name, priv->plat->bus_id);
+	else
+		snprintf(bus_id, MII_BUS_ID_SIZE, "sxgbe-%x",
+			 priv->plat->bus_id);
+
+	snprintf(phy_id_fmt, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id,
+		 priv->plat->phy_addr);
+	netdev_dbg(ndev, "%s: trying to attach to %s\n", __func__, phy_id_fmt);
+
+	phydev = phy_connect(ndev, phy_id_fmt, &sxgbe_adjust_link, phy_iface);
+
+	if (IS_ERR(phydev)) {
+		netdev_err(ndev, "Could not attach to PHY\n");
+		return PTR_ERR(phydev);
+	}
+
+	/* Stop Advertising 1000BASE Capability if interface is not GMII */
+	if ((phy_iface == PHY_INTERFACE_MODE_MII) ||
+	    (phy_iface == PHY_INTERFACE_MODE_RMII))
+		phydev->advertising &= ~(SUPPORTED_1000baseT_Half |
+					 SUPPORTED_1000baseT_Full);
+	if (phydev->phy_id == 0) {
+		phy_disconnect(phydev);
+		return -ENODEV;
+	}
+
+	netdev_dbg(ndev, "%s: attached to PHY (UID 0x%x) Link = %d\n",
+		   __func__, phydev->phy_id, phydev->link);
+
+	/* save phy device in private structure */
+	priv->phydev = phydev;
+
+	return 0;
+}
+
+/**
+ * sxgbe_clear_descriptors: clear descriptors
+ * @priv: driver private structure
+ * Description: this function is called to clear the tx and rx descriptors
+ * in case of both basic and extended descriptors are used.
+ */
+static void sxgbe_clear_descriptors(struct sxgbe_priv_data *priv)
+{
+	int i, j;
+	unsigned int txsize = priv->dma_tx_size;
+	unsigned int rxsize = priv->dma_rx_size;
+
+	/* Clear the Rx/Tx descriptors */
+	for (j = 0; j < SXGBE_RX_QUEUES; j++) {
+		for (i = 0; i < rxsize; i++)
+			priv->hw->desc->init_rx_desc(&priv->rxq[j]->dma_rx[i],
+						     priv->use_riwt, priv->mode,
+						     (i == rxsize - 1));
+	}
+
+	for (j = 0; j < SXGBE_TX_QUEUES; j++) {
+		for (i = 0; i < txsize; i++)
+			priv->hw->desc->init_tx_desc(&priv->txq[j]->dma_tx[i]);
+	}
+}
+
+static int sxgbe_init_rx_buffers(struct net_device *dev,
+				 struct sxgbe_rx_norm_desc *p, int i,
+				 unsigned int dma_buf_sz,
+				 struct sxgbe_rx_queue *rx_ring)
+{
+	struct sxgbe_priv_data *priv = netdev_priv(dev);
+	struct sk_buff *skb;
+
+	skb = __netdev_alloc_skb_ip_align(dev, dma_buf_sz, GFP_KERNEL);
+	if (!skb)
+		return -ENOMEM;
+
+	rx_ring->rx_skbuff[i] = skb;
+	rx_ring->rx_skbuff_dma[i] = dma_map_single(priv->device, skb->data,
+						   dma_buf_sz, DMA_FROM_DEVICE);
+
+	if (dma_mapping_error(priv->device, rx_ring->rx_skbuff_dma[i])) {
+		netdev_err(dev, "%s: DMA mapping error\n", __func__);
+		dev_kfree_skb_any(skb);
+		return -EINVAL;
+	}
+
+	p->rdes23.rx_rd_des23.buf2_addr = rx_ring->rx_skbuff_dma[i];
+
+	return 0;
+}
+/**
+ * init_tx_ring - init the TX descriptor ring
+ * @dev: net device structure
+ * @tx_ring: ring to be intialised
+ * @tx_rsize: ring size
+ * Description:  this function initializes the DMA TX descriptor
+ */
+static int init_tx_ring(struct device *dev, u8 queue_no,
+			struct sxgbe_tx_queue *tx_ring,	int tx_rsize)
+{
+	/* TX ring is not allcoated */
+	if (!tx_ring) {
+		dev_err(dev, "No memory for TX queue of SXGBE\n");
+		return -ENOMEM;
+	}
+
+	/* allocate memory for TX descriptors */
+	tx_ring->dma_tx = dma_zalloc_coherent(dev,
+					      tx_rsize * sizeof(struct sxgbe_tx_norm_desc),
+					      &tx_ring->dma_tx_phy, GFP_KERNEL);
+	if (!tx_ring->dma_tx)
+		return -ENOMEM;
+
+	/* allocate memory for TX skbuff array */
+	tx_ring->tx_skbuff_dma = devm_kcalloc(dev, tx_rsize,
+					      sizeof(dma_addr_t), GFP_KERNEL);
+	if (!tx_ring->tx_skbuff_dma)
+		goto dmamem_err;
+
+	tx_ring->tx_skbuff = devm_kcalloc(dev, tx_rsize,
+					  sizeof(struct sk_buff *), GFP_KERNEL);
+
+	if (!tx_ring->tx_skbuff)
+		goto dmamem_err;
+
+	/* assign queue number */
+	tx_ring->queue_no = queue_no;
+
+	/* initalise counters */
+	tx_ring->dirty_tx = 0;
+	tx_ring->cur_tx = 0;
+
+	/* initalise TX queue lock */
+	spin_lock_init(&tx_ring->tx_lock);
+
+	return 0;
+
+dmamem_err:
+	dma_free_coherent(dev, tx_rsize * sizeof(struct sxgbe_tx_norm_desc),
+			  tx_ring->dma_tx, tx_ring->dma_tx_phy);
+	return -ENOMEM;
+}
+
+/**
+ * free_rx_ring - free the RX descriptor ring
+ * @dev: net device structure
+ * @rx_ring: ring to be intialised
+ * @rx_rsize: ring size
+ * Description:  this function initializes the DMA RX descriptor
+ */
+void free_rx_ring(struct device *dev, struct sxgbe_rx_queue *rx_ring,
+		  int rx_rsize)
+{
+	dma_free_coherent(dev, rx_rsize * sizeof(struct sxgbe_rx_norm_desc),
+			  rx_ring->dma_rx, rx_ring->dma_rx_phy);
+	kfree(rx_ring->rx_skbuff_dma);
+	kfree(rx_ring->rx_skbuff);
+}
+
+/**
+ * init_rx_ring - init the RX descriptor ring
+ * @dev: net device structure
+ * @rx_ring: ring to be intialised
+ * @rx_rsize: ring size
+ * Description:  this function initializes the DMA RX descriptor
+ */
+static int init_rx_ring(struct net_device *dev, u8 queue_no,
+			struct sxgbe_rx_queue *rx_ring,	int rx_rsize)
+{
+	struct sxgbe_priv_data *priv = netdev_priv(dev);
+	int desc_index;
+	unsigned int bfsize = 0;
+	unsigned int ret = 0;
+
+	/* Set the max buffer size according to the MTU. */
+	bfsize = ALIGN(dev->mtu + ETH_HLEN + ETH_FCS_LEN + NET_IP_ALIGN, 8);
+
+	netif_dbg(priv, probe, dev, "%s: bfsize %d\n", __func__, bfsize);
+
+	/* RX ring is not allcoated */
+	if (rx_ring == NULL) {
+		netdev_err(dev, "No memory for RX queue\n");
+		goto error;
+	}
+
+	/* assign queue number */
+	rx_ring->queue_no = queue_no;
+
+	/* allocate memory for RX descriptors */
+	rx_ring->dma_rx = dma_zalloc_coherent(priv->device,
+					      rx_rsize * sizeof(struct sxgbe_rx_norm_desc),
+					      &rx_ring->dma_rx_phy, GFP_KERNEL);
+
+	if (rx_ring->dma_rx == NULL)
+		goto error;
+
+	/* allocate memory for RX skbuff array */
+	rx_ring->rx_skbuff_dma = kmalloc_array(rx_rsize,
+					       sizeof(dma_addr_t), GFP_KERNEL);
+	if (rx_ring->rx_skbuff_dma == NULL)
+		goto dmamem_err;
+
+	rx_ring->rx_skbuff = kmalloc_array(rx_rsize,
+					   sizeof(struct sk_buff *), GFP_KERNEL);
+	if (rx_ring->rx_skbuff == NULL)
+		goto rxbuff_err;
+
+	/* initialise the buffers */
+	for (desc_index = 0; desc_index < rx_rsize; desc_index++) {
+		struct sxgbe_rx_norm_desc *p;
+		p = rx_ring->dma_rx + desc_index;
+		ret = sxgbe_init_rx_buffers(dev, p, desc_index,
+					    bfsize, rx_ring);
+		if (ret)
+			goto err_init_rx_buffers;
+	}
+
+	/* initalise counters */
+	rx_ring->cur_rx = 0;
+	rx_ring->dirty_rx = (unsigned int)(desc_index - rx_rsize);
+	priv->dma_buf_sz = bfsize;
+
+	return 0;
+
+err_init_rx_buffers:
+	while (--desc_index >= 0)
+		free_rx_ring(priv->device, rx_ring, desc_index);
+	kfree(rx_ring->rx_skbuff);
+rxbuff_err:
+	kfree(rx_ring->rx_skbuff_dma);
+dmamem_err:
+	dma_free_coherent(priv->device,
+			  rx_rsize * sizeof(struct sxgbe_rx_norm_desc),
+			  rx_ring->dma_rx, rx_ring->dma_rx_phy);
+error:
+	return -ENOMEM;
+}
+/**
+ * free_tx_ring - free the TX descriptor ring
+ * @dev: net device structure
+ * @tx_ring: ring to be intialised
+ * @tx_rsize: ring size
+ * Description:  this function initializes the DMA TX descriptor
+ */
+void free_tx_ring(struct device *dev, struct sxgbe_tx_queue *tx_ring,
+		  int tx_rsize)
+{
+	dma_free_coherent(dev, tx_rsize * sizeof(struct sxgbe_tx_norm_desc),
+			  tx_ring->dma_tx, tx_ring->dma_tx_phy);
+}
+
+/**
+ * init_dma_desc_rings - init the RX/TX descriptor rings
+ * @dev: net device structure
+ * Description:  this function initializes the DMA RX/TX descriptors
+ * and allocates the socket buffers. It suppors the chained and ring
+ * modes.
+ */
+static int init_dma_desc_rings(struct net_device *netd)
+{
+	int queue_num, ret;
+	struct sxgbe_priv_data *priv = netdev_priv(netd);
+	int tx_rsize = priv->dma_tx_size;
+	int rx_rsize = priv->dma_rx_size;
+
+	/* Allocate memory for queue structures and TX descs */
+	SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) {
+		ret = init_tx_ring(priv->device, queue_num,
+				   priv->txq[queue_num], tx_rsize);
+		if (ret) {
+			dev_err(&netd->dev, "TX DMA ring allocation failed!\n");
+			goto txalloc_err;
+		}
+
+		/* save private pointer in each ring this
+		 * pointer is needed during cleaing TX queue
+		 */
+		priv->txq[queue_num]->priv_ptr = priv;
+	}
+
+	/* Allocate memory for queue structures and RX descs */
+	SXGBE_FOR_EACH_QUEUE(SXGBE_RX_QUEUES, queue_num) {
+		ret = init_rx_ring(netd, queue_num,
+				   priv->rxq[queue_num], rx_rsize);
+		if (ret) {
+			netdev_err(netd, "RX DMA ring allocation failed!!\n");
+			goto rxalloc_err;
+		}
+
+		/* save private pointer in each ring this
+		 * pointer is needed during cleaing TX queue
+		 */
+		priv->rxq[queue_num]->priv_ptr = priv;
+	}
+
+	sxgbe_clear_descriptors(priv);
+
+	return 0;
+
+txalloc_err:
+	while (queue_num--)
+		free_tx_ring(priv->device, priv->txq[queue_num], tx_rsize);
+	return ret;
+
+rxalloc_err:
+	while (queue_num--)
+		free_rx_ring(priv->device, priv->rxq[queue_num], rx_rsize);
+	return ret;
+}
+
+static void tx_free_ring_skbufs(struct sxgbe_tx_queue *txqueue)
+{
+	int dma_desc;
+	struct sxgbe_priv_data *priv = txqueue->priv_ptr;
+	int tx_rsize = priv->dma_tx_size;
+
+	for (dma_desc = 0; dma_desc < tx_rsize; dma_desc++) {
+		struct sxgbe_tx_norm_desc *tdesc = txqueue->dma_tx + dma_desc;
+
+		if (txqueue->tx_skbuff_dma[dma_desc])
+			dma_unmap_single(priv->device,
+					 txqueue->tx_skbuff_dma[dma_desc],
+					 priv->hw->desc->get_tx_len(tdesc),
+					 DMA_TO_DEVICE);
+
+		dev_kfree_skb_any(txqueue->tx_skbuff[dma_desc]);
+		txqueue->tx_skbuff[dma_desc] = NULL;
+		txqueue->tx_skbuff_dma[dma_desc] = 0;
+	}
+}
+
+
+static void dma_free_tx_skbufs(struct sxgbe_priv_data *priv)
+{
+	int queue_num;
+
+	SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) {
+		struct sxgbe_tx_queue *tqueue = priv->txq[queue_num];
+		tx_free_ring_skbufs(tqueue);
+	}
+}
+
+static void free_dma_desc_resources(struct sxgbe_priv_data *priv)
+{
+	int queue_num;
+	int tx_rsize = priv->dma_tx_size;
+	int rx_rsize = priv->dma_rx_size;
+
+	/* Release the DMA TX buffers */
+	dma_free_tx_skbufs(priv);
+
+	/* Release the TX ring memory also */
+	SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) {
+		free_tx_ring(priv->device, priv->txq[queue_num], tx_rsize);
+	}
+
+	/* Release the RX ring memory also */
+	SXGBE_FOR_EACH_QUEUE(SXGBE_RX_QUEUES, queue_num) {
+		free_rx_ring(priv->device, priv->rxq[queue_num], rx_rsize);
+	}
+}
+
+static int txring_mem_alloc(struct sxgbe_priv_data *priv)
+{
+	int queue_num;
+
+	SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) {
+		priv->txq[queue_num] = devm_kmalloc(priv->device,
+						    sizeof(struct sxgbe_tx_queue), GFP_KERNEL);
+		if (!priv->txq[queue_num])
+			return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static int rxring_mem_alloc(struct sxgbe_priv_data *priv)
+{
+	int queue_num;
+
+	SXGBE_FOR_EACH_QUEUE(SXGBE_RX_QUEUES, queue_num) {
+		priv->rxq[queue_num] = devm_kmalloc(priv->device,
+						    sizeof(struct sxgbe_rx_queue), GFP_KERNEL);
+		if (!priv->rxq[queue_num])
+			return -ENOMEM;
+	}
+
+	return 0;
+}
+
+/**
+ *  sxgbe_mtl_operation_mode - HW MTL operation mode
+ *  @priv: driver private structure
+ *  Description: it sets the MTL operation mode: tx/rx MTL thresholds
+ *  or Store-And-Forward capability.
+ */
+static void sxgbe_mtl_operation_mode(struct sxgbe_priv_data *priv)
+{
+	int queue_num;
+
+	/* TX/RX threshold control */
+	if (likely(priv->plat->force_sf_dma_mode)) {
+		/* set TC mode for TX QUEUES */
+		SXGBE_FOR_EACH_QUEUE(priv->hw_cap.tx_mtl_queues, queue_num)
+			priv->hw->mtl->set_tx_mtl_mode(priv->ioaddr, queue_num,
+						       SXGBE_MTL_SFMODE);
+		priv->tx_tc = SXGBE_MTL_SFMODE;
+
+		/* set TC mode for RX QUEUES */
+		SXGBE_FOR_EACH_QUEUE(priv->hw_cap.rx_mtl_queues, queue_num)
+			priv->hw->mtl->set_rx_mtl_mode(priv->ioaddr, queue_num,
+						       SXGBE_MTL_SFMODE);
+		priv->rx_tc = SXGBE_MTL_SFMODE;
+	} else if (unlikely(priv->plat->force_thresh_dma_mode)) {
+		/* set TC mode for TX QUEUES */
+		SXGBE_FOR_EACH_QUEUE(priv->hw_cap.tx_mtl_queues, queue_num)
+			priv->hw->mtl->set_tx_mtl_mode(priv->ioaddr, queue_num,
+						       priv->tx_tc);
+		/* set TC mode for RX QUEUES */
+		SXGBE_FOR_EACH_QUEUE(priv->hw_cap.rx_mtl_queues, queue_num)
+			priv->hw->mtl->set_rx_mtl_mode(priv->ioaddr, queue_num,
+						       priv->rx_tc);
+	} else {
+		pr_err("ERROR: %s: Invalid TX threshold mode\n", __func__);
+	}
+}
+
+/**
+ * sxgbe_tx_queue_clean:
+ * @priv: driver private structure
+ * Description: it reclaims resources after transmission completes.
+ */
+static void sxgbe_tx_queue_clean(struct sxgbe_tx_queue *tqueue)
+{
+	struct sxgbe_priv_data *priv = tqueue->priv_ptr;
+	unsigned int tx_rsize = priv->dma_tx_size;
+	struct netdev_queue *dev_txq;
+	u8 queue_no = tqueue->queue_no;
+
+	dev_txq = netdev_get_tx_queue(priv->dev, queue_no);
+
+	spin_lock(&tqueue->tx_lock);
+
+	priv->xstats.tx_clean++;
+	while (tqueue->dirty_tx != tqueue->cur_tx) {
+		unsigned int entry = tqueue->dirty_tx % tx_rsize;
+		struct sk_buff *skb = tqueue->tx_skbuff[entry];
+		struct sxgbe_tx_norm_desc *p;
+
+		p = tqueue->dma_tx + entry;
+
+		/* Check if the descriptor is owned by the DMA. */
+		if (priv->hw->desc->get_tx_owner(p))
+			break;
+
+		if (netif_msg_tx_done(priv))
+			pr_debug("%s: curr %d, dirty %d\n",
+				 __func__, tqueue->cur_tx, tqueue->dirty_tx);
+
+		if (likely(tqueue->tx_skbuff_dma[entry])) {
+			dma_unmap_single(priv->device,
+					 tqueue->tx_skbuff_dma[entry],
+					 priv->hw->desc->get_tx_len(p),
+					 DMA_TO_DEVICE);
+			tqueue->tx_skbuff_dma[entry] = 0;
+		}
+
+		if (likely(skb)) {
+			dev_kfree_skb(skb);
+			tqueue->tx_skbuff[entry] = NULL;
+		}
+
+		priv->hw->desc->release_tx_desc(p);
+
+		tqueue->dirty_tx++;
+	}
+
+	/* wake up queue */
+	if (unlikely(netif_tx_queue_stopped(dev_txq) &&
+		     sxgbe_tx_avail(tqueue, tx_rsize) > SXGBE_TX_THRESH(priv))) {
+		netif_tx_lock(priv->dev);
+		if (netif_tx_queue_stopped(dev_txq) &&
+		    sxgbe_tx_avail(tqueue, tx_rsize) > SXGBE_TX_THRESH(priv)) {
+			if (netif_msg_tx_done(priv))
+				pr_debug("%s: restart transmit\n", __func__);
+			netif_tx_wake_queue(dev_txq);
+		}
+		netif_tx_unlock(priv->dev);
+	}
+
+	spin_unlock(&tqueue->tx_lock);
+}
+
+/**
+ * sxgbe_tx_clean:
+ * @priv: driver private structure
+ * Description: it reclaims resources after transmission completes.
+ */
+static void sxgbe_tx_all_clean(struct sxgbe_priv_data *priv)
+{
+	u8 queue_num;
+
+	SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) {
+		struct sxgbe_tx_queue *tqueue = priv->txq[queue_num];
+
+		sxgbe_tx_queue_clean(tqueue);
+	}
+}
+
+/**
+ * sxgbe_restart_tx_queue: irq tx error mng function
+ * @priv: driver private structure
+ * Description: it cleans the descriptors and restarts the transmission
+ * in case of errors.
+ */
+static void sxgbe_restart_tx_queue(struct sxgbe_priv_data *priv, int queue_num)
+{
+	struct sxgbe_tx_queue *tx_ring = priv->txq[queue_num];
+	struct netdev_queue *dev_txq = netdev_get_tx_queue(priv->dev,
+							   queue_num);
+
+	/* stop the queue */
+	netif_tx_stop_queue(dev_txq);
+
+	/* stop the tx dma */
+	priv->hw->dma->stop_tx_queue(priv->ioaddr, queue_num);
+
+	/* free the skbuffs of the ring */
+	tx_free_ring_skbufs(tx_ring);
+
+	/* initalise counters */
+	tx_ring->cur_tx = 0;
+	tx_ring->dirty_tx = 0;
+
+	/* start the tx dma */
+	priv->hw->dma->start_tx_queue(priv->ioaddr, queue_num);
+
+	priv->dev->stats.tx_errors++;
+
+	/* wakeup the queue */
+	netif_tx_wake_queue(dev_txq);
+}
+
+/**
+ * sxgbe_reset_all_tx_queues: irq tx error mng function
+ * @priv: driver private structure
+ * Description: it cleans all the descriptors and
+ * restarts the transmission on all queues in case of errors.
+ */
+static void sxgbe_reset_all_tx_queues(struct sxgbe_priv_data *priv)
+{
+	int queue_num;
+
+	/* On TX timeout of net device, resetting of all queues
+	 * may not be proper way, revisit this later if needed
+	 */
+	SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num)
+		sxgbe_restart_tx_queue(priv, queue_num);
+}
+
+/**
+ * sxgbe_get_hw_features: get XMAC capabilities from the HW cap. register.
+ * @priv: driver private structure
+ * Description:
+ *  new GMAC chip generations have a new register to indicate the
+ *  presence of the optional feature/functions.
+ *  This can be also used to override the value passed through the
+ *  platform and necessary for old MAC10/100 and GMAC chips.
+ */
+static int sxgbe_get_hw_features(struct sxgbe_priv_data * const priv)
+{
+	int rval = 0;
+	struct sxgbe_hw_features *features = &priv->hw_cap;
+
+	/* Read First Capability Register CAP[0] */
+	rval = priv->hw->mac->get_hw_feature(priv->ioaddr, 0);
+	if (rval) {
+		features->pmt_remote_wake_up =
+			SXGBE_HW_FEAT_PMT_TEMOTE_WOP(rval);
+		features->pmt_magic_frame = SXGBE_HW_FEAT_PMT_MAGIC_PKT(rval);
+		features->atime_stamp = SXGBE_HW_FEAT_IEEE1500_2008(rval);
+		features->tx_csum_offload =
+			SXGBE_HW_FEAT_TX_CSUM_OFFLOAD(rval);
+		features->rx_csum_offload =
+			SXGBE_HW_FEAT_RX_CSUM_OFFLOAD(rval);
+		features->multi_macaddr = SXGBE_HW_FEAT_MACADDR_COUNT(rval);
+		features->tstamp_srcselect = SXGBE_HW_FEAT_TSTMAP_SRC(rval);
+		features->sa_vlan_insert = SXGBE_HW_FEAT_SRCADDR_VLAN(rval);
+	}
+
+	/* Read First Capability Register CAP[1] */
+	rval = priv->hw->mac->get_hw_feature(priv->ioaddr, 1);
+	if (rval) {
+		features->rxfifo_size = SXGBE_HW_FEAT_RX_FIFO_SIZE(rval);
+		features->txfifo_size = SXGBE_HW_FEAT_TX_FIFO_SIZE(rval);
+		features->atstmap_hword = SXGBE_HW_FEAT_TX_FIFO_SIZE(rval);
+		features->dcb_enable = SXGBE_HW_FEAT_DCB(rval);
+		features->splithead_enable = SXGBE_HW_FEAT_SPLIT_HDR(rval);
+		features->tcpseg_offload = SXGBE_HW_FEAT_TSO(rval);
+		features->debug_mem = SXGBE_HW_FEAT_DEBUG_MEM_IFACE(rval);
+		features->rss_enable = SXGBE_HW_FEAT_RSS(rval);
+		features->hash_tsize = SXGBE_HW_FEAT_HASH_TABLE_SIZE(rval);
+		features->l3l4_filer_size = SXGBE_HW_FEAT_L3L4_FILTER_NUM(rval);
+	}
+
+	/* Read First Capability Register CAP[2] */
+	rval = priv->hw->mac->get_hw_feature(priv->ioaddr, 2);
+	if (rval) {
+		features->rx_mtl_queues = SXGBE_HW_FEAT_RX_MTL_QUEUES(rval);
+		features->tx_mtl_queues = SXGBE_HW_FEAT_TX_MTL_QUEUES(rval);
+		features->rx_dma_channels = SXGBE_HW_FEAT_RX_DMA_CHANNELS(rval);
+		features->tx_dma_channels = SXGBE_HW_FEAT_TX_DMA_CHANNELS(rval);
+		features->pps_output_count = SXGBE_HW_FEAT_PPS_OUTPUTS(rval);
+		features->aux_input_count = SXGBE_HW_FEAT_AUX_SNAPSHOTS(rval);
+	}
+
+	return rval;
+}
+
+/**
+ * sxgbe_check_ether_addr: check if the MAC addr is valid
+ * @priv: driver private structure
+ * Description:
+ * it is to verify if the MAC address is valid, in case of failures it
+ * generates a random MAC address
+ */
+static void sxgbe_check_ether_addr(struct sxgbe_priv_data *priv)
+{
+	if (!is_valid_ether_addr(priv->dev->dev_addr)) {
+		priv->hw->mac->get_umac_addr((void __iomem *)
+					     priv->ioaddr,
+					     priv->dev->dev_addr, 0);
+		if (!is_valid_ether_addr(priv->dev->dev_addr))
+			eth_hw_addr_random(priv->dev);
+	}
+	dev_info(priv->device, "device MAC address %pM\n",
+		 priv->dev->dev_addr);
+}
+
+/**
+ * sxgbe_init_dma_engine: DMA init.
+ * @priv: driver private structure
+ * Description:
+ * It inits the DMA invoking the specific SXGBE callback.
+ * Some DMA parameters can be passed from the platform;
+ * in case of these are not passed a default is kept for the MAC or GMAC.
+ */
+static int sxgbe_init_dma_engine(struct sxgbe_priv_data *priv)
+{
+	int pbl = DEFAULT_DMA_PBL, fixed_burst = 0, burst_map = 0;
+	int queue_num;
+
+	if (priv->plat->dma_cfg) {
+		pbl = priv->plat->dma_cfg->pbl;
+		fixed_burst = priv->plat->dma_cfg->fixed_burst;
+		burst_map = priv->plat->dma_cfg->burst_map;
+	}
+
+	SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num)
+		priv->hw->dma->cha_init(priv->ioaddr, queue_num,
+					fixed_burst, pbl,
+					(priv->txq[queue_num])->dma_tx_phy,
+					(priv->rxq[queue_num])->dma_rx_phy,
+					priv->dma_tx_size, priv->dma_rx_size);
+
+	return priv->hw->dma->init(priv->ioaddr, fixed_burst, burst_map);
+}
+
+/**
+ * sxgbe_init_mtl_engine: MTL init.
+ * @priv: driver private structure
+ * Description:
+ * It inits the MTL invoking the specific SXGBE callback.
+ */
+static void sxgbe_init_mtl_engine(struct sxgbe_priv_data *priv)
+{
+	int queue_num;
+
+	SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) {
+		priv->hw->mtl->mtl_set_txfifosize(priv->ioaddr, queue_num,
+						  priv->hw_cap.tx_mtl_qsize);
+		priv->hw->mtl->mtl_enable_txqueue(priv->ioaddr, queue_num);
+	}
+}
+
+/**
+ * sxgbe_disable_mtl_engine: MTL disable.
+ * @priv: driver private structure
+ * Description:
+ * It disables the MTL queues by invoking the specific SXGBE callback.
+ */
+static void sxgbe_disable_mtl_engine(struct sxgbe_priv_data *priv)
+{
+	int queue_num;
+
+	SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num)
+		priv->hw->mtl->mtl_disable_txqueue(priv->ioaddr, queue_num);
+}
+
+
+/**
+ * sxgbe_tx_timer: mitigation sw timer for tx.
+ * @data: data pointer
+ * Description:
+ * This is the timer handler to directly invoke the sxgbe_tx_clean.
+ */
+static void sxgbe_tx_timer(unsigned long data)
+{
+	struct sxgbe_tx_queue *p = (struct sxgbe_tx_queue *)data;
+	sxgbe_tx_queue_clean(p);
+}
+
+/**
+ * sxgbe_init_tx_coalesce: init tx mitigation options.
+ * @priv: driver private structure
+ * Description:
+ * This inits the transmit coalesce parameters: i.e. timer rate,
+ * timer handler and default threshold used for enabling the
+ * interrupt on completion bit.
+ */
+static void sxgbe_tx_init_coalesce(struct sxgbe_priv_data *priv)
+{
+	u8 queue_num;
+
+	SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) {
+		struct sxgbe_tx_queue *p = priv->txq[queue_num];
+		p->tx_coal_frames =  SXGBE_TX_FRAMES;
+		p->tx_coal_timer = SXGBE_COAL_TX_TIMER;
+		init_timer(&p->txtimer);
+		p->txtimer.expires = SXGBE_COAL_TIMER(p->tx_coal_timer);
+		p->txtimer.data = (unsigned long)&priv->txq[queue_num];
+		p->txtimer.function = sxgbe_tx_timer;
+		add_timer(&p->txtimer);
+	}
+}
+
+static void sxgbe_tx_del_timer(struct sxgbe_priv_data *priv)
+{
+	u8 queue_num;
+
+	SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) {
+		struct sxgbe_tx_queue *p = priv->txq[queue_num];
+		del_timer_sync(&p->txtimer);
+	}
+}
+
+/**
+ *  sxgbe_open - open entry point of the driver
+ *  @dev : pointer to the device structure.
+ *  Description:
+ *  This function is the open entry point of the driver.
+ *  Return value:
+ *  0 on success and an appropriate (-)ve integer as defined in errno.h
+ *  file on failure.
+ */
+static int sxgbe_open(struct net_device *dev)
+{
+	struct sxgbe_priv_data *priv = netdev_priv(dev);
+	int ret, queue_num;
+
+	clk_prepare_enable(priv->sxgbe_clk);
+
+	sxgbe_check_ether_addr(priv);
+
+	/* Init the phy */
+	ret = sxgbe_init_phy(dev);
+	if (ret) {
+		netdev_err(dev, "%s: Cannot attach to PHY (error: %d)\n",
+			   __func__, ret);
+		goto phy_error;
+	}
+
+	/* Create and initialize the TX/RX descriptors chains. */
+	priv->dma_tx_size = SXGBE_ALIGN(DMA_TX_SIZE);
+	priv->dma_rx_size = SXGBE_ALIGN(DMA_RX_SIZE);
+	priv->dma_buf_sz = SXGBE_ALIGN(DMA_BUFFER_SIZE);
+	priv->tx_tc = TC_DEFAULT;
+	priv->rx_tc = TC_DEFAULT;
+	init_dma_desc_rings(dev);
+
+	/* DMA initialization and SW reset */
+	ret = sxgbe_init_dma_engine(priv);
+	if (ret < 0) {
+		netdev_err(dev, "%s: DMA initialization failed\n", __func__);
+		goto init_error;
+	}
+
+	/*  MTL initialization */
+	sxgbe_init_mtl_engine(priv);
+
+	/* Copy the MAC addr into the HW  */
+	priv->hw->mac->set_umac_addr(priv->ioaddr, dev->dev_addr, 0);
+
+	/* Initialize the MAC Core */
+	priv->hw->mac->core_init(priv->ioaddr);
+
+	/* Request the IRQ lines */
+	ret = devm_request_irq(priv->device, priv->irq, sxgbe_common_interrupt,
+			       IRQF_SHARED, dev->name, dev);
+	if (unlikely(ret < 0)) {
+		netdev_err(dev, "%s: ERROR: allocating the IRQ %d (error: %d)\n",
+			   __func__, priv->irq, ret);
+		goto init_error;
+	}
+
+	/* Request TX DMA irq lines */
+	SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) {
+		ret = devm_request_irq(priv->device,
+				       (priv->txq[queue_num])->irq_no,
+				       sxgbe_tx_interrupt, 0,
+				       dev->name, priv->txq[queue_num]);
+		if (unlikely(ret < 0)) {
+			netdev_err(dev, "%s: ERROR: allocating TX IRQ %d (error: %d)\n",
+				   __func__, priv->irq, ret);
+			goto init_error;
+		}
+	}
+
+	/* Request RX DMA irq lines */
+	SXGBE_FOR_EACH_QUEUE(SXGBE_RX_QUEUES, queue_num) {
+		ret = devm_request_irq(priv->device,
+				       (priv->rxq[queue_num])->irq_no,
+				       sxgbe_rx_interrupt, 0,
+				       dev->name, priv->rxq[queue_num]);
+		if (unlikely(ret < 0)) {
+			netdev_err(dev, "%s: ERROR: allocating TX IRQ %d (error: %d)\n",
+				   __func__, priv->irq, ret);
+			goto init_error;
+		}
+	}
+
+	/* Enable the MAC Rx/Tx */
+	priv->hw->mac->enable_tx(priv->ioaddr, true);
+	priv->hw->mac->enable_rx(priv->ioaddr, true);
+
+	/* Set the HW DMA mode and the COE */
+	sxgbe_mtl_operation_mode(priv);
+
+	/* Extra statistics */
+	memset(&priv->xstats, 0, sizeof(struct sxgbe_extra_stats));
+
+	priv->xstats.tx_threshold = priv->tx_tc;
+	priv->xstats.rx_threshold = priv->rx_tc;
+
+	/* Start the ball rolling... */
+	netdev_dbg(dev, "DMA RX/TX processes started...\n");
+	priv->hw->dma->start_tx(priv->ioaddr, SXGBE_TX_QUEUES);
+	priv->hw->dma->start_rx(priv->ioaddr, SXGBE_RX_QUEUES);
+
+	if (priv->phydev)
+		phy_start(priv->phydev);
+
+	/* initalise TX coalesce parameters */
+	sxgbe_tx_init_coalesce(priv);
+
+	if ((priv->use_riwt) && (priv->hw->dma->rx_watchdog)) {
+		priv->rx_riwt = SXGBE_MAX_DMA_RIWT;
+		priv->hw->dma->rx_watchdog(priv->ioaddr, SXGBE_MAX_DMA_RIWT);
+	}
+
+	napi_enable(&priv->napi);
+	netif_start_queue(dev);
+
+	return 0;
+
+init_error:
+	free_dma_desc_resources(priv);
+	if (priv->phydev)
+		phy_disconnect(priv->phydev);
+phy_error:
+	clk_disable_unprepare(priv->sxgbe_clk);
+
+	return ret;
+}
+
+/**
+ *  sxgbe_release - close entry point of the driver
+ *  @dev : device pointer.
+ *  Description:
+ *  This is the stop entry point of the driver.
+ */
+static int sxgbe_release(struct net_device *dev)
+{
+	struct sxgbe_priv_data *priv = netdev_priv(dev);
+
+	/* Stop and disconnect the PHY */
+	if (priv->phydev) {
+		phy_stop(priv->phydev);
+		phy_disconnect(priv->phydev);
+		priv->phydev = NULL;
+	}
+
+	netif_tx_stop_all_queues(dev);
+
+	napi_disable(&priv->napi);
+
+	/* delete TX timers */
+	sxgbe_tx_del_timer(priv);
+
+	/* Stop TX/RX DMA and clear the descriptors */
+	priv->hw->dma->stop_tx(priv->ioaddr, SXGBE_TX_QUEUES);
+	priv->hw->dma->stop_rx(priv->ioaddr, SXGBE_RX_QUEUES);
+
+	/* disable MTL queue */
+	sxgbe_disable_mtl_engine(priv);
+
+	/* Release and free the Rx/Tx resources */
+	free_dma_desc_resources(priv);
+
+	/* Disable the MAC Rx/Tx */
+	priv->hw->mac->enable_tx(priv->ioaddr, false);
+	priv->hw->mac->enable_rx(priv->ioaddr, false);
+
+	clk_disable_unprepare(priv->sxgbe_clk);
+
+	return 0;
+}
+
+/**
+ *  sxgbe_xmit: Tx entry point of the driver
+ *  @skb : the socket buffer
+ *  @dev : device pointer
+ *  Description : this is the tx entry point of the driver.
+ *  It programs the chain or the ring and supports oversized frames
+ *  and SG feature.
+ */
+static netdev_tx_t sxgbe_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	unsigned int entry, frag_num;
+	struct netdev_queue *dev_txq;
+	unsigned txq_index = skb_get_queue_mapping(skb);
+	struct sxgbe_priv_data *priv = netdev_priv(dev);
+	unsigned int tx_rsize = priv->dma_tx_size;
+	struct sxgbe_tx_queue *tqueue = priv->txq[txq_index];
+	struct sxgbe_tx_norm_desc *tx_desc, *first_desc;
+	int nr_frags = skb_shinfo(skb)->nr_frags;
+	int no_pagedlen = skb_headlen(skb);
+	int is_jumbo = 0;
+
+	/* get the TX queue handle */
+	dev_txq = netdev_get_tx_queue(dev, txq_index);
+
+	/* get the spinlock */
+	spin_lock(&tqueue->tx_lock);
+
+	if (unlikely(sxgbe_tx_avail(tqueue, tx_rsize) < nr_frags + 1)) {
+		if (!netif_tx_queue_stopped(dev_txq)) {
+			netif_tx_stop_queue(dev_txq);
+			netdev_err(dev, "%s: Tx Ring is full when %d queue is awake\n",
+				   __func__, txq_index);
+		}
+		/* release the spin lock in case of BUSY */
+		spin_unlock(&tqueue->tx_lock);
+		return NETDEV_TX_BUSY;
+	}
+
+	entry = tqueue->cur_tx % tx_rsize;
+	tx_desc = tqueue->dma_tx + entry;
+
+	first_desc = tx_desc;
+
+	/* save the skb address */
+	tqueue->tx_skbuff[entry] = skb;
+
+	if (!is_jumbo) {
+		tx_desc->tdes01 = dma_map_single(priv->device, skb->data,
+						   no_pagedlen, DMA_TO_DEVICE);
+		if (dma_mapping_error(priv->device, tx_desc->tdes01))
+			pr_err("%s: TX dma mapping failed!!\n", __func__);
+
+		priv->hw->desc->prepare_tx_desc(tx_desc, 1, no_pagedlen,
+						no_pagedlen, 0);
+	}
+
+	for (frag_num = 0; frag_num < nr_frags; frag_num++) {
+		const skb_frag_t *frag = &skb_shinfo(skb)->frags[frag_num];
+		int len = skb_frag_size(frag);
+
+		entry = (++tqueue->cur_tx) % tx_rsize;
+		tx_desc = tqueue->dma_tx + entry;
+		tx_desc->tdes01 = skb_frag_dma_map(priv->device, frag, 0, len,
+						   DMA_TO_DEVICE);
+
+		tqueue->tx_skbuff_dma[entry] = tx_desc->tdes01;
+		tqueue->tx_skbuff[entry] = NULL;
+
+		/* prepare the descriptor */
+		priv->hw->desc->prepare_tx_desc(tx_desc, 0, len,
+						len, 0);
+		/* memory barrier to flush descriptor */
+		wmb();
+
+		/* set the owner */
+		priv->hw->desc->set_tx_owner(tx_desc);
+	}
+
+	/* close the descriptors */
+	priv->hw->desc->close_tx_desc(tx_desc);
+
+	/* memory barrier to flush descriptor */
+	wmb();
+
+	tqueue->tx_count_frames += nr_frags + 1;
+	if (tqueue->tx_count_frames > tqueue->tx_coal_frames) {
+		priv->hw->desc->clear_tx_ic(tx_desc);
+		priv->xstats.tx_reset_ic_bit++;
+		mod_timer(&tqueue->txtimer,
+			  SXGBE_COAL_TIMER(tqueue->tx_coal_timer));
+	} else {
+		tqueue->tx_count_frames = 0;
+	}
+
+	/* set owner for first desc */
+	priv->hw->desc->set_tx_owner(first_desc);
+
+	/* memory barrier to flush descriptor */
+	wmb();
+
+	tqueue->cur_tx++;
+
+	/* display current ring */
+	netif_dbg(priv, pktdata, dev, "%s: curr %d dirty=%d entry=%d, first=%p, nfrags=%d\n",
+		  __func__, tqueue->cur_tx % tx_rsize,
+		  tqueue->dirty_tx % tx_rsize, entry,
+		  first_desc, nr_frags);
+
+	if (unlikely(sxgbe_tx_avail(tqueue, tx_rsize) <= (MAX_SKB_FRAGS + 1))) {
+		netif_dbg(priv, hw, dev, "%s: stop transmitted packets\n",
+			  __func__);
+		netif_tx_stop_queue(dev_txq);
+	}
+
+	dev->stats.tx_bytes += skb->len;
+
+	if (unlikely((skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) &&
+		     tqueue->hwts_tx_en)) {
+		/* declare that device is doing timestamping */
+		skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
+		priv->hw->desc->tx_enable_tstamp(first_desc);
+	}
+
+	if (!tqueue->hwts_tx_en)
+		skb_tx_timestamp(skb);
+
+	priv->hw->dma->enable_dma_transmission(priv->ioaddr, txq_index);
+
+	spin_unlock(&tqueue->tx_lock);
+
+	return NETDEV_TX_OK;
+}
+
+/**
+ * sxgbe_rx_refill: refill used skb preallocated buffers
+ * @priv: driver private structure
+ * Description : this is to reallocate the skb for the reception process
+ * that is based on zero-copy.
+ */
+static void sxgbe_rx_refill(struct sxgbe_priv_data *priv)
+{
+	unsigned int rxsize = priv->dma_rx_size;
+	int bfsize = priv->dma_buf_sz;
+	u8 qnum = priv->cur_rx_qnum;
+
+	for (; priv->rxq[qnum]->cur_rx - priv->rxq[qnum]->dirty_rx > 0;
+	     priv->rxq[qnum]->dirty_rx++) {
+		unsigned int entry = priv->rxq[qnum]->dirty_rx % rxsize;
+		struct sxgbe_rx_norm_desc *p;
+
+		p = priv->rxq[qnum]->dma_rx + entry;
+
+		if (likely(priv->rxq[qnum]->rx_skbuff[entry] == NULL)) {
+			struct sk_buff *skb;
+
+			skb = netdev_alloc_skb_ip_align(priv->dev, bfsize);
+
+			if (unlikely(skb == NULL))
+				break;
+
+			priv->rxq[qnum]->rx_skbuff[entry] = skb;
+			priv->rxq[qnum]->rx_skbuff_dma[entry] =
+				dma_map_single(priv->device, skb->data, bfsize,
+					       DMA_FROM_DEVICE);
+
+			p->rdes23.rx_rd_des23.buf2_addr =
+				priv->rxq[qnum]->rx_skbuff_dma[entry];
+		}
+
+		/* Added memory barrier for RX descriptor modification */
+		wmb();
+		priv->hw->desc->set_rx_owner(p);
+		/* Added memory barrier for RX descriptor modification */
+		wmb();
+	}
+}
+
+/**
+ * sxgbe_rx: receive the frames from the remote host
+ * @priv: driver private structure
+ * @limit: napi bugget.
+ * Description :  this the function called by the napi poll method.
+ * It gets all the frames inside the ring.
+ */
+static int sxgbe_rx(struct sxgbe_priv_data *priv, int limit)
+{
+	u8 qnum = priv->cur_rx_qnum;
+	unsigned int rxsize = priv->dma_rx_size;
+	unsigned int entry = priv->rxq[qnum]->cur_rx;
+	unsigned int next_entry = 0;
+	unsigned int count = 0;
+
+	while (count < limit) {
+		struct sxgbe_rx_norm_desc *p;
+		struct sk_buff *skb;
+		int frame_len;
+
+		p = priv->rxq[qnum]->dma_rx + entry;
+
+		if (priv->hw->desc->get_rx_owner(p))
+			break;
+
+		count++;
+
+		next_entry = (++priv->rxq[qnum]->cur_rx) % rxsize;
+		prefetch(priv->rxq[qnum]->dma_rx + next_entry);
+
+		/*TO DO read the status of the incoming frame */
+
+		skb = priv->rxq[qnum]->rx_skbuff[entry];
+
+		if (unlikely(!skb))
+			netdev_err(priv->dev, "rx descriptor is not consistent\n");
+
+		prefetch(skb->data - NET_IP_ALIGN);
+		priv->rxq[qnum]->rx_skbuff[entry] = NULL;
+
+		frame_len = priv->hw->desc->get_rx_frame_len(p);
+
+		skb_put(skb, frame_len);
+
+		netif_receive_skb(skb);
+
+		entry = next_entry;
+	}
+
+	sxgbe_rx_refill(priv);
+
+	return count;
+}
+
+/**
+ *  sxgbe_poll - sxgbe poll method (NAPI)
+ *  @napi : pointer to the napi structure.
+ *  @budget : maximum number of packets that the current CPU can receive from
+ *	      all interfaces.
+ *  Description :
+ *  To look at the incoming frames and clear the tx resources.
+ */
+static int sxgbe_poll(struct napi_struct *napi, int budget)
+{
+	struct sxgbe_priv_data *priv = container_of(napi,
+						    struct sxgbe_priv_data, napi);
+	int work_done = 0;
+	u8 qnum = priv->cur_rx_qnum;
+
+	priv->xstats.napi_poll++;
+	/* first, clean the tx queues */
+	sxgbe_tx_all_clean(priv);
+
+	work_done = sxgbe_rx(priv, budget);
+	if (work_done < budget) {
+		napi_complete(napi);
+		priv->hw->dma->enable_dma_irq(priv->ioaddr, qnum);
+	}
+
+	return work_done;
+}
+
+/**
+ *  sxgbe_tx_timeout
+ *  @dev : Pointer to net device structure
+ *  Description: this function is called when a packet transmission fails to
+ *   complete within a reasonable time. The driver will mark the error in the
+ *   netdev structure and arrange for the device to be reset to a sane state
+ *   in order to transmit a new packet.
+ */
+static void sxgbe_tx_timeout(struct net_device *dev)
+{
+	struct sxgbe_priv_data *priv = netdev_priv(dev);
+
+	sxgbe_reset_all_tx_queues(priv);
+}
+
+/**
+ *  sxgbe_common_interrupt - main ISR
+ *  @irq: interrupt number.
+ *  @dev_id: to pass the net device pointer.
+ *  Description: this is the main driver interrupt service routine.
+ *  It calls the DMA ISR and also the core ISR to manage PMT, MMC, LPI
+ *  interrupts.
+ */
+static irqreturn_t sxgbe_common_interrupt(int irq, void *dev_id)
+{
+	return IRQ_HANDLED;
+}
+
+/**
+ *  sxgbe_tx_interrupt - TX DMA ISR
+ *  @irq: interrupt number.
+ *  @dev_id: to pass the net device pointer.
+ *  Description: this is the tx dma interrupt service routine.
+ */
+static irqreturn_t sxgbe_tx_interrupt(int irq, void *dev_id)
+{
+	int status;
+	struct sxgbe_tx_queue *txq = (struct sxgbe_tx_queue *)dev_id;
+	struct sxgbe_priv_data *priv = txq->priv_ptr;
+
+	/* get the channel status */
+	status = priv->hw->dma->tx_dma_int_status(priv->ioaddr, txq->queue_no,
+						  &priv->xstats);
+	/* check for normal path */
+	if (likely((status & handle_tx)))
+		napi_schedule(&priv->napi);
+
+	/* check for unrecoverable error */
+	if (unlikely((status & tx_hard_error)))
+		sxgbe_restart_tx_queue(priv, txq->queue_no);
+
+	/* check for TC configuration change */
+	if (unlikely((status & tx_bump_tc) &&
+		     (priv->tx_tc != SXGBE_MTL_SFMODE) &&
+		     (priv->tx_tc < 512))) {
+		/* step of TX TC is 32 till 128, otherwise 64 */
+		priv->tx_tc += (priv->tx_tc < 128) ? 32 : 64;
+		priv->hw->mtl->set_tx_mtl_mode(priv->ioaddr,
+					       txq->queue_no, priv->tx_tc);
+		priv->xstats.tx_threshold = priv->tx_tc;
+	}
+
+	return IRQ_HANDLED;
+}
+
+/**
+ *  sxgbe_rx_interrupt - RX DMA ISR
+ *  @irq: interrupt number.
+ *  @dev_id: to pass the net device pointer.
+ *  Description: this is the rx dma interrupt service routine.
+ */
+static irqreturn_t sxgbe_rx_interrupt(int irq, void *dev_id)
+{
+	int status;
+	struct sxgbe_rx_queue *rxq = (struct sxgbe_rx_queue *)dev_id;
+	struct sxgbe_priv_data *priv = rxq->priv_ptr;
+
+	/* get the channel status */
+	status = priv->hw->dma->rx_dma_int_status(priv->ioaddr, rxq->queue_no,
+						  &priv->xstats);
+
+	if (likely((status & handle_rx) && (napi_schedule_prep(&priv->napi)))) {
+		priv->hw->dma->disable_dma_irq(priv->ioaddr, rxq->queue_no);
+		__napi_schedule(&priv->napi);
+	}
+
+	/* check for TC configuration change */
+	if (unlikely((status & rx_bump_tc) &&
+		     (priv->rx_tc != SXGBE_MTL_SFMODE) &&
+		     (priv->rx_tc < 128))) {
+		/* step of TC is 32 */
+		priv->rx_tc += 32;
+		priv->hw->mtl->set_rx_mtl_mode(priv->ioaddr,
+					       rxq->queue_no, priv->rx_tc);
+		priv->xstats.rx_threshold = priv->rx_tc;
+	}
+
+	return IRQ_HANDLED;
+}
+
+static inline u64 sxgbe_get_stat64(void __iomem *ioaddr, int reg_lo, int reg_hi)
+{
+	u64 val = readl(ioaddr + reg_lo);
+
+	val |= ((u64)readl(ioaddr + reg_hi)) << 32;
+
+	return val;
+}
+
+
+/*  sxgbe_get_stats64 - entry point to see statistical information of device
+ *  @dev : device pointer.
+ *  @stats : pointer to hold all the statistical information of device.
+ *  Description:
+ *  This function is a driver entry point whenever ifconfig command gets
+ *  executed to see device statistics. Statistics are number of
+ *  bytes sent or received, errors occured etc.
+ *  Return value:
+ *  This function returns various statistical information of device.
+ */
+static struct rtnl_link_stats64 *sxgbe_get_stats64(struct net_device *dev,
+						   struct rtnl_link_stats64 *stats)
+{
+	struct sxgbe_priv_data *priv = netdev_priv(dev);
+	void __iomem *ioaddr = priv->ioaddr;
+	u64 count;
+
+	spin_lock(&priv->stats_lock);
+	/* Freeze the counter registers before reading value otherwise it may
+	 * get updated by hardware while we are reading them
+	 */
+	writel(SXGBE_MMC_CTRL_CNT_FRZ, ioaddr + SXGBE_MMC_CTL_REG);
+
+	stats->rx_bytes = sxgbe_get_stat64(ioaddr,
+					   SXGBE_MMC_RXOCTETLO_GCNT_REG,
+					   SXGBE_MMC_RXOCTETHI_GCNT_REG);
+
+	stats->rx_packets = sxgbe_get_stat64(ioaddr,
+					     SXGBE_MMC_RXFRAMELO_GBCNT_REG,
+					     SXGBE_MMC_RXFRAMEHI_GBCNT_REG);
+
+	stats->multicast = sxgbe_get_stat64(ioaddr,
+					    SXGBE_MMC_RXMULTILO_GCNT_REG,
+					    SXGBE_MMC_RXMULTIHI_GCNT_REG);
+
+	stats->rx_crc_errors = sxgbe_get_stat64(ioaddr,
+						SXGBE_MMC_RXCRCERRLO_REG,
+						SXGBE_MMC_RXCRCERRHI_REG);
+
+	stats->rx_length_errors = sxgbe_get_stat64(ioaddr,
+						  SXGBE_MMC_RXLENERRLO_REG,
+						  SXGBE_MMC_RXLENERRHI_REG);
+
+	stats->rx_missed_errors = sxgbe_get_stat64(ioaddr,
+						   SXGBE_MMC_RXFIFOOVERFLOWLO_GBCNT_REG,
+						   SXGBE_MMC_RXFIFOOVERFLOWHI_GBCNT_REG);
+
+	stats->tx_bytes = sxgbe_get_stat64(ioaddr,
+					   SXGBE_MMC_TXOCTETLO_GCNT_REG,
+					   SXGBE_MMC_TXOCTETHI_GCNT_REG);
+
+	count = sxgbe_get_stat64(ioaddr, SXGBE_MMC_TXFRAMELO_GBCNT_REG,
+				 SXGBE_MMC_TXFRAMEHI_GBCNT_REG);
+
+	stats->tx_errors = sxgbe_get_stat64(ioaddr, SXGBE_MMC_TXFRAMELO_GCNT_REG,
+					    SXGBE_MMC_TXFRAMEHI_GCNT_REG);
+	stats->tx_errors = count - stats->tx_errors;
+	stats->tx_packets = count;
+	stats->tx_fifo_errors = sxgbe_get_stat64(ioaddr, SXGBE_MMC_TXUFLWLO_GBCNT_REG,
+						 SXGBE_MMC_TXUFLWHI_GBCNT_REG);
+	writel(0, ioaddr + SXGBE_MMC_CTL_REG);
+	spin_unlock(&priv->stats_lock);
+
+	return stats;
+}
+
+/*  sxgbe_set_features - entry point to set offload features of the device.
+ *  @dev : device pointer.
+ *  @features : features which are required to be set.
+ *  Description:
+ *  This function is a driver entry point and called by Linux kernel whenever
+ *  any device features are set or reset by user.
+ *  Return value:
+ *  This function returns 0 after setting or resetting device features.
+ */
+static int sxgbe_set_features(struct net_device *dev,
+			      netdev_features_t features)
+{
+	struct sxgbe_priv_data *priv = netdev_priv(dev);
+	netdev_features_t changed = dev->features ^ features;
+	u32 ctrl;
+
+	if (changed & NETIF_F_RXCSUM) {
+		ctrl = readl(priv->ioaddr + SXGBE_CORE_RX_CONFIG_REG);
+		if (features & NETIF_F_RXCSUM)
+			ctrl |= SXGBE_RX_CSUMOFFLOAD_ENABLE;
+		else
+			ctrl &= ~SXGBE_RX_CSUMOFFLOAD_ENABLE;
+		writel(ctrl, priv->ioaddr + SXGBE_CORE_RX_CONFIG_REG);
+	}
+
+	return 0;
+}
+
+/*  sxgbe_change_mtu - entry point to change MTU size for the device.
+ *  @dev : device pointer.
+ *  @new_mtu : the new MTU size for the device.
+ *  Description: the Maximum Transfer Unit (MTU) is used by the network layer
+ *  to drive packet transmission. Ethernet has an MTU of 1500 octets
+ *  (ETH_DATA_LEN). This value can be changed with ifconfig.
+ *  Return value:
+ *  0 on success and an appropriate (-)ve integer as defined in errno.h
+ *  file on failure.
+ */
+static int sxgbe_change_mtu(struct net_device *dev, int new_mtu)
+{
+	/* RFC 791, page 25, "Every internet module must be able to forward
+	 * a datagram of 68 octets without further fragmentation."
+	 */
+	if (new_mtu < MIN_MTU || (new_mtu > MAX_MTU)) {
+		netdev_err(dev, "invalid MTU, MTU should be in between %d and %d\n",
+			   MIN_MTU, MAX_MTU);
+		return -EINVAL;
+	}
+
+	/* Return if the buffer sizes will not change */
+	if (dev->mtu == new_mtu)
+		return 0;
+
+	dev->mtu = new_mtu;
+
+	if (!netif_running(dev))
+		return 0;
+
+	/* Recevice ring buffer size is needed to be set based on MTU. If MTU is
+	 * changed then reinitilisation of the receive ring buffers need to be
+	 * done. Hence bring interface down and bring interface back up
+	 */
+	sxgbe_release(dev);
+	return sxgbe_open(dev);
+}
+
+static void sxgbe_set_umac_addr(void __iomem *ioaddr, unsigned char *addr,
+				unsigned int reg_n)
+{
+	unsigned long data;
+
+	data = (addr[5] << 8) | addr[4];
+	/* For MAC Addr registers se have to set the Address Enable (AE)
+	 * bit that has no effect on the High Reg 0 where the bit 31 (MO)
+	 * is RO.
+	 */
+	writel(data | SXGBE_HI_REG_AE, ioaddr + SXGBE_ADDR_HIGH(reg_n));
+	data = (addr[3] << 24) | (addr[2] << 16) | (addr[1] << 8) | addr[0];
+	writel(data, ioaddr + SXGBE_ADDR_LOW(reg_n));
+}
+
+/**
+ * sxgbe_set_rx_mode - entry point for setting different receive mode of
+ * a device. unicast, multicast addressing
+ * @dev : pointer to the device structure
+ * Description:
+ * This function is a driver entry point which gets called by the kernel
+ * whenever different receive mode like unicast, multicast and promiscuous
+ * must be enabled/disabled.
+ * Return value:
+ * void.
+ */
+static void sxgbe_set_rx_mode(struct net_device *dev)
+{
+	struct sxgbe_priv_data *priv = netdev_priv(dev);
+	void __iomem *ioaddr = (void __iomem *)priv->ioaddr;
+	unsigned int value = 0;
+	u32 mc_filter[2];
+	struct netdev_hw_addr *ha;
+	int reg = 1;
+
+	netdev_dbg(dev, "%s: # mcasts %d, # unicast %d\n",
+		   __func__, netdev_mc_count(dev), netdev_uc_count(dev));
+
+	if (dev->flags & IFF_PROMISC) {
+		value = SXGBE_FRAME_FILTER_PR;
+
+	} else if ((netdev_mc_count(dev) > SXGBE_HASH_TABLE_SIZE) ||
+		   (dev->flags & IFF_ALLMULTI)) {
+		value = SXGBE_FRAME_FILTER_PM;	/* pass all multi */
+		writel(0xffffffff, ioaddr + SXGBE_HASH_HIGH);
+		writel(0xffffffff, ioaddr + SXGBE_HASH_LOW);
+
+	} else if (!netdev_mc_empty(dev)) {
+		/* Hash filter for multicast */
+		value = SXGBE_FRAME_FILTER_HMC;
+
+		memset(mc_filter, 0, sizeof(mc_filter));
+		netdev_for_each_mc_addr(ha, dev) {
+			/* The upper 6 bits of the calculated CRC are used to
+			 * index the contens of the hash table
+			 */
+			int bit_nr = bitrev32(~crc32_le(~0, ha->addr, 6)) >> 26;
+
+			/* The most significant bit determines the register to
+			 * use (H/L) while the other 5 bits determine the bit
+			 * within the register.
+			 */
+			mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
+		}
+		writel(mc_filter[0], ioaddr + SXGBE_HASH_LOW);
+		writel(mc_filter[1], ioaddr + SXGBE_HASH_HIGH);
+	}
+
+	/* Handle multiple unicast addresses (perfect filtering) */
+	if (netdev_uc_count(dev) > SXGBE_MAX_PERFECT_ADDRESSES)
+		/* Switch to promiscuous mode if more than 16 addrs
+		 * are required
+		 */
+		value |= SXGBE_FRAME_FILTER_PR;
+	else {
+		netdev_for_each_uc_addr(ha, dev) {
+			sxgbe_set_umac_addr(ioaddr, ha->addr, reg);
+			reg++;
+		}
+	}
+#ifdef FRAME_FILTER_DEBUG
+	/* Enable Receive all mode (to debug filtering_fail errors) */
+	value |= SXGBE_FRAME_FILTER_RA;
+#endif
+	writel(value, ioaddr + SXGBE_FRAME_FILTER);
+
+	netdev_dbg(dev, "Filter: 0x%08x\n\tHash: HI 0x%08x, LO 0x%08x\n",
+		   readl(ioaddr + SXGBE_FRAME_FILTER),
+		   readl(ioaddr + SXGBE_HASH_HIGH),
+		   readl(ioaddr + SXGBE_HASH_LOW));
+}
+
+/**
+ * sxgbe_config - entry point for changing configuration mode passed on by
+ * ifconfig
+ * @dev : pointer to the device structure
+ * @map : pointer to the device mapping structure
+ * Description:
+ * This function is a driver entry point which gets called by the kernel
+ * whenever some device configuration is changed.
+ * Return value:
+ * This function returns 0 if success and appropriate error otherwise.
+ */
+static int sxgbe_config(struct net_device *dev, struct ifmap *map)
+{
+	struct sxgbe_priv_data *priv = netdev_priv(dev);
+
+	/* Can't act on a running interface */
+	if (dev->flags & IFF_UP)
+		return -EBUSY;
+
+	/* Don't allow changing the I/O address */
+	if (map->base_addr != (unsigned long)priv->ioaddr) {
+		netdev_warn(dev, "can't change I/O address\n");
+		return -EOPNOTSUPP;
+	}
+
+	/* Don't allow changing the IRQ */
+	if (map->irq != priv->irq) {
+		netdev_warn(dev, "not change IRQ number %d\n", priv->irq);
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/**
+ * sxgbe_poll_controller - entry point for polling receive by device
+ * @dev : pointer to the device structure
+ * Description:
+ * This function is used by NETCONSOLE and other diagnostic tools
+ * to allow network I/O with interrupts disabled.
+ * Return value:
+ * Void.
+ */
+static void sxgbe_poll_controller(struct net_device *dev)
+{
+	struct sxgbe_priv_data *priv = netdev_priv(dev);
+
+	disable_irq(priv->irq);
+	sxgbe_rx_interrupt(priv->irq, dev);
+	enable_irq(priv->irq);
+}
+#endif
+
+/*  sxgbe_ioctl - Entry point for the Ioctl
+ *  @dev: Device pointer.
+ *  @rq: An IOCTL specefic structure, that can contain a pointer to
+ *  a proprietary structure used to pass information to the driver.
+ *  @cmd: IOCTL command
+ *  Description:
+ *  Currently it supports the phy_mii_ioctl(...) and HW time stamping.
+ */
+static int sxgbe_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+	struct sxgbe_priv_data *priv = netdev_priv(dev);
+	int ret = -EOPNOTSUPP;
+
+	if (!netif_running(dev))
+		return -EINVAL;
+
+	switch (cmd) {
+	case SIOCGMIIPHY:
+	case SIOCGMIIREG:
+	case SIOCSMIIREG:
+		if (!priv->phydev)
+			return -EINVAL;
+		ret = phy_mii_ioctl(priv->phydev, rq, cmd);
+		break;
+	default:
+		break;
+	}
+
+	return ret;
+}
+
+static const struct net_device_ops sxgbe_netdev_ops = {
+	.ndo_open		= sxgbe_open,
+	.ndo_start_xmit		= sxgbe_xmit,
+	.ndo_stop		= sxgbe_release,
+	.ndo_get_stats64	= sxgbe_get_stats64,
+	.ndo_change_mtu		= sxgbe_change_mtu,
+	.ndo_set_features	= sxgbe_set_features,
+	.ndo_set_rx_mode	= sxgbe_set_rx_mode,
+	.ndo_tx_timeout		= sxgbe_tx_timeout,
+	.ndo_do_ioctl		= sxgbe_ioctl,
+	.ndo_set_config		= sxgbe_config,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= sxgbe_poll_controller,
+#endif
+	.ndo_set_mac_address	= eth_mac_addr,
+};
+
+/* Get the hardware ops */
+void sxgbe_get_ops(struct sxgbe_ops * const ops_ptr)
+{
+	ops_ptr->mac		= sxgbe_get_core_ops();
+	ops_ptr->desc		= sxgbe_get_desc_ops();
+	ops_ptr->dma		= sxgbe_get_dma_ops();
+	ops_ptr->mtl		= sxgbe_get_mtl_ops();
+
+	/* set the MDIO communication Address/Data regisers */
+	ops_ptr->mii.addr	= SXGBE_MDIO_SCMD_ADD_REG;
+	ops_ptr->mii.data	= SXGBE_MDIO_SCMD_DATA_REG;
+
+	/* Assigning the default link settings
+	 * no SXGBE defined default values to be set in registers,
+	 * so assigning as 0 for port and duplex
+	 */
+	ops_ptr->link.port	= 0;
+	ops_ptr->link.duplex	= 0;
+	ops_ptr->link.speed	= SXGBE_SPEED_10G;
+}
+
+/**
+ *  sxgbe_hw_init - Init the GMAC device
+ *  @priv: driver private structure
+ *  Description: this function checks the HW capability
+ *  (if supported) and sets the driver's features.
+ */
+static void sxgbe_hw_init(struct sxgbe_priv_data * const priv)
+{
+	u32 ctrl_ids;
+
+	priv->hw = kmalloc(sizeof(*priv->hw), GFP_KERNEL);
+
+	/* get the hardware ops */
+	sxgbe_get_ops(priv->hw);
+
+	/* get the controller id */
+	ctrl_ids = priv->hw->mac->get_controller_version(priv->ioaddr);
+	priv->hw->ctrl_uid = (ctrl_ids & 0x00ff0000) >> 16;
+	priv->hw->ctrl_id = (ctrl_ids & 0x000000ff);
+	pr_info("user ID: 0x%x, Controller ID: 0x%x\n",
+		priv->hw->ctrl_uid, priv->hw->ctrl_id);
+
+	/* get the H/W features */
+	if (!sxgbe_get_hw_features(priv))
+		pr_info("Hardware features not found\n");
+
+	if (priv->hw_cap.tx_csum_offload)
+		pr_info("TX Checksum offload supported\n");
+
+	if (priv->hw_cap.rx_csum_offload)
+		pr_info("RX Checksum offload supported\n");
+}
+
+/**
+ * sxgbe_drv_probe
+ * @device: device pointer
+ * @plat_dat: platform data pointer
+ * @addr: iobase memory address
+ * Description: this is the main probe function used to
+ * call the alloc_etherdev, allocate the priv structure.
+ */
+struct sxgbe_priv_data *sxgbe_drv_probe(struct device *device,
+					struct sxgbe_plat_data *plat_dat,
+					void __iomem *addr)
+{
+	struct sxgbe_priv_data *priv;
+	struct net_device *ndev;
+	int ret;
+
+	ndev = alloc_etherdev_mqs(sizeof(struct sxgbe_priv_data),
+				  SXGBE_TX_QUEUES, SXGBE_RX_QUEUES);
+	if (!ndev)
+		return NULL;
+
+	SET_NETDEV_DEV(ndev, device);
+
+	priv = netdev_priv(ndev);
+	priv->device = device;
+	priv->dev = ndev;
+
+	sxgbe_set_ethtool_ops(ndev);
+	priv->plat = plat_dat;
+	priv->ioaddr = addr;
+
+	/* Init MAC and get the capabilities */
+	sxgbe_hw_init(priv);
+
+	/* allocate memory resources for Descriptor rings */
+	ret = txring_mem_alloc(priv);
+	if (ret)
+		goto error_free_netdev;
+
+	ret = rxring_mem_alloc(priv);
+	if (ret)
+		goto error_free_netdev;
+
+	ndev->netdev_ops = &sxgbe_netdev_ops;
+
+	ndev->hw_features = NETIF_F_SG | NETIF_F_RXCSUM;
+	ndev->features |= ndev->hw_features | NETIF_F_HIGHDMA;
+	ndev->watchdog_timeo = msecs_to_jiffies(TX_TIMEO);
+
+	/* assign filtering support */
+	ndev->priv_flags |= IFF_UNICAST_FLT;
+
+	priv->msg_enable = netif_msg_init(debug, default_msg_level);
+
+	/* Rx Watchdog is available, enable depend on platform data */
+	if (!priv->plat->riwt_off) {
+		priv->use_riwt = 1;
+		pr_info("Enable RX Mitigation via HW Watchdog Timer\n");
+	}
+
+	netif_napi_add(ndev, &priv->napi, sxgbe_poll, 64);
+
+	spin_lock_init(&priv->stats_lock);
+
+	priv->sxgbe_clk = clk_get(priv->device, SXGBE_RESOURCE_NAME);
+	if (IS_ERR(priv->sxgbe_clk)) {
+		netdev_warn(ndev, "%s: warning: cannot get CSR clock\n",
+			    __func__);
+		goto error_clk_get;
+	}
+
+	/* If a specific clk_csr value is passed from the platform
+	 * this means that the CSR Clock Range selection cannot be
+	 * changed at run-time and it is fixed. Viceversa the driver'll try to
+	 * set the MDC clock dynamically according to the csr actual
+	 * clock input.
+	 */
+	if (!priv->plat->clk_csr)
+		sxgbe_clk_csr_set(priv);
+	else
+		priv->clk_csr = priv->plat->clk_csr;
+
+	/* MDIO bus Registration */
+	ret = sxgbe_mdio_register(ndev);
+	if (ret < 0) {
+		netdev_dbg(ndev, "%s: MDIO bus (id: %d) registration failed\n",
+			   __func__, priv->plat->bus_id);
+		goto error_mdio_register;
+	}
+
+	ret = register_netdev(ndev);
+	if (ret) {
+		pr_err("%s: ERROR %i registering the device\n", __func__, ret);
+		goto error_netdev_register;
+	}
+
+	sxgbe_check_ether_addr(priv);
+
+	return priv;
+
+error_mdio_register:
+	clk_put(priv->sxgbe_clk);
+error_clk_get:
+error_netdev_register:
+	netif_napi_del(&priv->napi);
+error_free_netdev:
+	free_netdev(ndev);
+
+	return NULL;
+}
+
+/**
+ * sxgbe_drv_remove
+ * @ndev: net device pointer
+ * Description: this function resets the TX/RX processes, disables the MAC RX/TX
+ * changes the link status, releases the DMA descriptor rings.
+ */
+int sxgbe_drv_remove(struct net_device *ndev)
+{
+	struct sxgbe_priv_data *priv = netdev_priv(ndev);
+
+	netdev_info(ndev, "%s: removing driver\n", __func__);
+
+	priv->hw->dma->stop_rx(priv->ioaddr, SXGBE_RX_QUEUES);
+	priv->hw->dma->stop_tx(priv->ioaddr, SXGBE_TX_QUEUES);
+
+	priv->hw->mac->enable_tx(priv->ioaddr, false);
+	priv->hw->mac->enable_rx(priv->ioaddr, false);
+
+	netif_napi_del(&priv->napi);
+
+	sxgbe_mdio_unregister(ndev);
+
+	unregister_netdev(ndev);
+
+	free_netdev(ndev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+int sxgbe_suspend(struct net_device *ndev)
+{
+	return 0;
+}
+
+int sxgbe_resume(struct net_device *ndev)
+{
+	return 0;
+}
+
+int sxgbe_freeze(struct net_device *ndev)
+{
+	return -ENOSYS;
+}
+
+int sxgbe_restore(struct net_device *ndev)
+{
+	return -ENOSYS;
+}
+#endif /* CONFIG_PM */
+
+/* Driver is configured as Platform driver */
+static int __init sxgbe_init(void)
+{
+	int ret;
+
+	ret = sxgbe_register_platform();
+	if (ret)
+		goto err;
+	return 0;
+err:
+	pr_err("driver registration failed\n");
+	return ret;
+}
+
+static void __exit sxgbe_exit(void)
+{
+	sxgbe_unregister_platform();
+}
+
+module_init(sxgbe_init);
+module_exit(sxgbe_exit);
+
+#ifndef MODULE
+static int __init sxgbe_cmdline_opt(char *str)
+{
+	return 0;
+}
+
+__setup("sxgbeeth=", sxgbe_cmdline_opt);
+#endif /* MODULE */
+
+
+
+MODULE_DESCRIPTION("SAMSUNG 10G/2.5G/1G Ethernet PLATFORM driver");
+
+MODULE_PARM_DESC(debug, "Message Level (-1: default, 0: no output, 16: all)");
+
+MODULE_AUTHOR("Siva Reddy Kallam <siva.kallam@samsung.com>");
+MODULE_AUTHOR("ByungHo An <bh74.an@samsung.com>");
+MODULE_AUTHOR("Girish K S <ks.giri@samsung.com>");
+MODULE_AUTHOR("Vipul Pandya <vipul.pandya@samsung.com>");
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_mdio.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_mdio.c
new file mode 100644
index 000000000000..b0eb0a2c52ca
--- /dev/null
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_mdio.c
@@ -0,0 +1,251 @@
+/* 10G controller driver for Samsung SoCs
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Siva Reddy Kallam <siva.kallam@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/io.h>
+#include <linux/mii.h>
+#include <linux/netdevice.h>
+#include <linux/platform_device.h>
+#include <linux/phy.h>
+#include <linux/slab.h>
+#include <linux/sxgbe_platform.h>
+
+#include "sxgbe_common.h"
+#include "sxgbe_reg.h"
+
+#define SXGBE_SMA_WRITE_CMD	0x01 /* write command */
+#define SXGBE_SMA_PREAD_CMD	0x02 /* post read  increament address */
+#define SXGBE_SMA_READ_CMD	0x03 /* read command */
+#define SXGBE_SMA_SKIP_ADDRFRM	0x00040000 /* skip the address frame */
+#define SXGBE_MII_BUSY		0x00800000 /* mii busy */
+
+static int sxgbe_mdio_busy_wait(void __iomem *ioaddr, unsigned int mii_data)
+{
+	unsigned long fin_time = jiffies + 3 * HZ; /* 3 seconds */
+
+	while (!time_after(jiffies, fin_time)) {
+		if (!(readl(ioaddr + mii_data) & SXGBE_MII_BUSY))
+			return 0;
+		cpu_relax();
+	}
+
+	return -EBUSY;
+}
+
+static void sxgbe_mdio_ctrl_data(struct sxgbe_priv_data *sp, u32 cmd,
+				 u16 phydata)
+{
+	u32 reg = phydata;
+
+	reg |= (cmd << 16) | SXGBE_SMA_SKIP_ADDRFRM |
+	       ((sp->clk_csr & 0x7) << 19) | SXGBE_MII_BUSY;
+	writel(reg, sp->ioaddr + sp->hw->mii.data);
+}
+
+static void sxgbe_mdio_c45(struct sxgbe_priv_data *sp, u32 cmd, int phyaddr,
+			   int phyreg, u16 phydata)
+{
+	u32 reg;
+
+	/* set mdio address register */
+	reg = ((phyreg >> 16) & 0x1f) << 21;
+	reg |= (phyaddr << 16) | (phyreg & 0xffff);
+	writel(reg, sp->ioaddr + sp->hw->mii.addr);
+
+	sxgbe_mdio_ctrl_data(sp, cmd, phydata);
+}
+
+static void sxgbe_mdio_c22(struct sxgbe_priv_data *sp, u32 cmd, int phyaddr,
+			   int phyreg, u16 phydata)
+{
+	u32 reg;
+
+	writel(1 << phyaddr, sp->ioaddr + SXGBE_MDIO_CLAUSE22_PORT_REG);
+
+	/* set mdio address register */
+	reg = (phyaddr << 16) | (phyreg & 0x1f);
+	writel(reg, sp->ioaddr + sp->hw->mii.addr);
+
+	sxgbe_mdio_ctrl_data(sp, cmd, phydata);
+}
+
+static int sxgbe_mdio_access(struct sxgbe_priv_data *sp, u32 cmd, int phyaddr,
+			     int phyreg, u16 phydata)
+{
+	const struct mii_regs *mii = &sp->hw->mii;
+	int rc;
+
+	rc = sxgbe_mdio_busy_wait(sp->ioaddr, mii->data);
+	if (rc < 0)
+		return rc;
+
+	if (phyreg & MII_ADDR_C45) {
+		sxgbe_mdio_c45(sp, cmd, phyaddr, phyreg, phydata);
+	} else {
+		 /* Ports 0-3 only support C22. */
+		if (phyaddr >= 4)
+			return -ENODEV;
+
+		sxgbe_mdio_c22(sp, cmd, phyaddr, phyreg, phydata);
+	}
+
+	return sxgbe_mdio_busy_wait(sp->ioaddr, mii->data);
+}
+
+/**
+ * sxgbe_mdio_read
+ * @bus: points to the mii_bus structure
+ * @phyaddr: address of phy port
+ * @phyreg: address of register with in phy register
+ * Description: this function used for C45 and C22 MDIO Read
+ */
+static int sxgbe_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg)
+{
+	struct net_device *ndev = bus->priv;
+	struct sxgbe_priv_data *priv = netdev_priv(ndev);
+	int rc;
+
+	rc = sxgbe_mdio_access(priv, SXGBE_SMA_READ_CMD, phyaddr, phyreg, 0);
+	if (rc < 0)
+		return rc;
+
+	return readl(priv->ioaddr + priv->hw->mii.data) & 0xffff;
+}
+
+/**
+ * sxgbe_mdio_write
+ * @bus: points to the mii_bus structure
+ * @phyaddr: address of phy port
+ * @phyreg: address of phy registers
+ * @phydata: data to be written into phy register
+ * Description: this function is used for C45 and C22 MDIO write
+ */
+static int sxgbe_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg,
+			     u16 phydata)
+{
+	struct net_device *ndev = bus->priv;
+	struct sxgbe_priv_data *priv = netdev_priv(ndev);
+
+	return sxgbe_mdio_access(priv, SXGBE_SMA_WRITE_CMD, phyaddr, phyreg,
+				 phydata);
+}
+
+int sxgbe_mdio_register(struct net_device *ndev)
+{
+	struct mii_bus *mdio_bus;
+	struct sxgbe_priv_data *priv = netdev_priv(ndev);
+	struct sxgbe_mdio_bus_data *mdio_data = priv->plat->mdio_bus_data;
+	int err, phy_addr;
+	int *irqlist;
+	bool act;
+
+	/* allocate the new mdio bus */
+	mdio_bus = mdiobus_alloc();
+	if (!mdio_bus) {
+		netdev_err(ndev, "%s: mii bus allocation failed\n", __func__);
+		return -ENOMEM;
+	}
+
+	if (mdio_data->irqs)
+		irqlist = mdio_data->irqs;
+	else
+		irqlist = priv->mii_irq;
+
+	/* assign mii bus fields */
+	mdio_bus->name = "samsxgbe";
+	mdio_bus->read = &sxgbe_mdio_read;
+	mdio_bus->write = &sxgbe_mdio_write;
+	snprintf(mdio_bus->id, MII_BUS_ID_SIZE, "%s-%x",
+		 mdio_bus->name, priv->plat->bus_id);
+	mdio_bus->priv = ndev;
+	mdio_bus->phy_mask = mdio_data->phy_mask;
+	mdio_bus->parent = priv->device;
+
+	/* register with kernel subsystem */
+	err = mdiobus_register(mdio_bus);
+	if (err != 0) {
+		netdev_err(ndev, "mdiobus register failed\n");
+		goto mdiobus_err;
+	}
+
+	for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
+		struct phy_device *phy = mdio_bus->phy_map[phy_addr];
+
+		if (phy) {
+			char irq_num[4];
+			char *irq_str;
+			/* If an IRQ was provided to be assigned after
+			 * the bus probe, do it here.
+			 */
+			if ((mdio_data->irqs == NULL) &&
+			    (mdio_data->probed_phy_irq > 0)) {
+				irqlist[phy_addr] = mdio_data->probed_phy_irq;
+				phy->irq = mdio_data->probed_phy_irq;
+			}
+
+			/* If we're  going to bind the MAC to this PHY bus,
+			 * and no PHY number was provided to the MAC,
+			 * use the one probed here.
+			 */
+			if (priv->plat->phy_addr == -1)
+				priv->plat->phy_addr = phy_addr;
+
+			act = (priv->plat->phy_addr == phy_addr);
+			switch (phy->irq) {
+			case PHY_POLL:
+				irq_str = "POLL";
+				break;
+			case PHY_IGNORE_INTERRUPT:
+				irq_str = "IGNORE";
+				break;
+			default:
+				sprintf(irq_num, "%d", phy->irq);
+				irq_str = irq_num;
+				break;
+			}
+			netdev_info(ndev, "PHY ID %08x at %d IRQ %s (%s)%s\n",
+				    phy->phy_id, phy_addr, irq_str,
+				    dev_name(&phy->dev), act ? " active" : "");
+		}
+	}
+
+	if (!err) {
+		netdev_err(ndev, "PHY not found\n");
+		mdiobus_unregister(mdio_bus);
+		mdiobus_free(mdio_bus);
+		goto mdiobus_err;
+	}
+
+	priv->mii = mdio_bus;
+
+	return 0;
+
+mdiobus_err:
+	mdiobus_free(mdio_bus);
+	return err;
+}
+
+int sxgbe_mdio_unregister(struct net_device *ndev)
+{
+	struct sxgbe_priv_data *priv = netdev_priv(ndev);
+
+	if (!priv->mii)
+		return 0;
+
+	mdiobus_unregister(priv->mii);
+	priv->mii->priv = NULL;
+	mdiobus_free(priv->mii);
+	priv->mii = NULL;
+
+	return 0;
+}
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_mtl.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_mtl.c
new file mode 100644
index 000000000000..324681c2bb74
--- /dev/null
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_mtl.c
@@ -0,0 +1,254 @@
+/* 10G controller driver for Samsung SoCs
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Siva Reddy Kallam <siva.kallam@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/export.h>
+#include <linux/jiffies.h>
+
+#include "sxgbe_mtl.h"
+#include "sxgbe_reg.h"
+
+static void sxgbe_mtl_init(void __iomem *ioaddr, unsigned int etsalg,
+			   unsigned int raa)
+{
+	u32 reg_val;
+
+	reg_val = readl(ioaddr + SXGBE_MTL_OP_MODE_REG);
+	reg_val &= ETS_RST;
+
+	/* ETS Algorith */
+	switch (etsalg & SXGBE_MTL_OPMODE_ESTMASK) {
+	case ETS_WRR:
+		reg_val &= ETS_WRR;
+		break;
+	case ETS_WFQ:
+		reg_val |= ETS_WFQ;
+		break;
+	case ETS_DWRR:
+		reg_val |= ETS_DWRR;
+		break;
+	}
+	writel(reg_val, ioaddr + SXGBE_MTL_OP_MODE_REG);
+
+	switch (raa & SXGBE_MTL_OPMODE_RAAMASK) {
+	case RAA_SP:
+		reg_val &= RAA_SP;
+		break;
+	case RAA_WSP:
+		reg_val |= RAA_WSP;
+		break;
+	}
+	writel(reg_val, ioaddr + SXGBE_MTL_OP_MODE_REG);
+}
+
+/* For Dynamic DMA channel mapping for Rx queue */
+static void sxgbe_mtl_dma_dm_rxqueue(void __iomem *ioaddr)
+{
+	writel(RX_QUEUE_DYNAMIC, ioaddr + SXGBE_MTL_RXQ_DMAMAP0_REG);
+	writel(RX_QUEUE_DYNAMIC, ioaddr + SXGBE_MTL_RXQ_DMAMAP1_REG);
+	writel(RX_QUEUE_DYNAMIC, ioaddr + SXGBE_MTL_RXQ_DMAMAP2_REG);
+}
+
+static void sxgbe_mtl_set_txfifosize(void __iomem *ioaddr, int queue_num,
+				     int queue_fifo)
+{
+	u32 fifo_bits, reg_val;
+
+	/* 0 means 256 bytes */
+	fifo_bits = (queue_fifo / SXGBE_MTL_TX_FIFO_DIV) - 1;
+	reg_val = readl(ioaddr + SXGBE_MTL_TXQ_OPMODE_REG(queue_num));
+	reg_val |= (fifo_bits << SXGBE_MTL_FIFO_LSHIFT);
+	writel(reg_val, ioaddr + SXGBE_MTL_TXQ_OPMODE_REG(queue_num));
+}
+
+static void sxgbe_mtl_set_rxfifosize(void __iomem *ioaddr, int queue_num,
+				     int queue_fifo)
+{
+	u32 fifo_bits, reg_val;
+
+	/* 0 means 256 bytes */
+	fifo_bits = (queue_fifo / SXGBE_MTL_RX_FIFO_DIV)-1;
+	reg_val = readl(ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num));
+	reg_val |= (fifo_bits << SXGBE_MTL_FIFO_LSHIFT);
+	writel(reg_val, ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num));
+}
+
+static void sxgbe_mtl_enable_txqueue(void __iomem *ioaddr, int queue_num)
+{
+	u32 reg_val;
+
+	reg_val = readl(ioaddr + SXGBE_MTL_TXQ_OPMODE_REG(queue_num));
+	reg_val |= SXGBE_MTL_ENABLE_QUEUE;
+	writel(reg_val, ioaddr + SXGBE_MTL_TXQ_OPMODE_REG(queue_num));
+}
+
+static void sxgbe_mtl_disable_txqueue(void __iomem *ioaddr, int queue_num)
+{
+	u32 reg_val;
+
+	reg_val = readl(ioaddr + SXGBE_MTL_TXQ_OPMODE_REG(queue_num));
+	reg_val &= ~SXGBE_MTL_ENABLE_QUEUE;
+	writel(reg_val, ioaddr + SXGBE_MTL_TXQ_OPMODE_REG(queue_num));
+}
+
+static void sxgbe_mtl_fc_active(void __iomem *ioaddr, int queue_num,
+				int threshold)
+{
+	u32 reg_val;
+
+	reg_val = readl(ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num));
+	reg_val &= ~(SXGBE_MTL_FCMASK << RX_FC_ACTIVE);
+	reg_val |= (threshold << RX_FC_ACTIVE);
+
+	writel(reg_val, ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num));
+}
+
+static void sxgbe_mtl_fc_enable(void __iomem *ioaddr, int queue_num)
+{
+	u32 reg_val;
+
+	reg_val = readl(ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num));
+	reg_val |= SXGBE_MTL_ENABLE_FC;
+	writel(reg_val, ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num));
+}
+
+static void sxgbe_mtl_fc_deactive(void __iomem *ioaddr, int queue_num,
+				  int threshold)
+{
+	u32 reg_val;
+
+	reg_val = readl(ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num));
+	reg_val &= ~(SXGBE_MTL_FCMASK << RX_FC_DEACTIVE);
+	reg_val |= (threshold << RX_FC_DEACTIVE);
+
+	writel(reg_val, ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num));
+}
+
+static void sxgbe_mtl_fep_enable(void __iomem *ioaddr, int queue_num)
+{
+	u32 reg_val;
+
+	reg_val = readl(ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num));
+	reg_val |= SXGBE_MTL_RXQ_OP_FEP;
+
+	writel(reg_val, ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num));
+}
+
+static void sxgbe_mtl_fep_disable(void __iomem *ioaddr, int queue_num)
+{
+	u32 reg_val;
+
+	reg_val = readl(ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num));
+	reg_val &= ~(SXGBE_MTL_RXQ_OP_FEP);
+
+	writel(reg_val, ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num));
+}
+
+static void sxgbe_mtl_fup_enable(void __iomem *ioaddr, int queue_num)
+{
+	u32 reg_val;
+
+	reg_val = readl(ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num));
+	reg_val |= SXGBE_MTL_RXQ_OP_FUP;
+
+	writel(reg_val, ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num));
+}
+
+static void sxgbe_mtl_fup_disable(void __iomem *ioaddr, int queue_num)
+{
+	u32 reg_val;
+
+	reg_val = readl(ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num));
+	reg_val &= ~(SXGBE_MTL_RXQ_OP_FUP);
+
+	writel(reg_val, ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num));
+}
+
+
+static void sxgbe_set_tx_mtl_mode(void __iomem *ioaddr, int queue_num,
+				  int tx_mode)
+{
+	u32 reg_val;
+
+	reg_val = readl(ioaddr + SXGBE_MTL_TXQ_OPMODE_REG(queue_num));
+	/* TX specific MTL mode settings */
+	if (tx_mode == SXGBE_MTL_SFMODE) {
+		reg_val |= SXGBE_MTL_SFMODE;
+	} else {
+		/* set the TTC values */
+		if (tx_mode <= 64)
+			reg_val |= MTL_CONTROL_TTC_64;
+		else if (tx_mode <= 96)
+			reg_val |= MTL_CONTROL_TTC_96;
+		else if (tx_mode <= 128)
+			reg_val |= MTL_CONTROL_TTC_128;
+		else if (tx_mode <= 192)
+			reg_val |= MTL_CONTROL_TTC_192;
+		else if (tx_mode <= 256)
+			reg_val |= MTL_CONTROL_TTC_256;
+		else if (tx_mode <= 384)
+			reg_val |= MTL_CONTROL_TTC_384;
+		else
+			reg_val |= MTL_CONTROL_TTC_512;
+	}
+
+	/* write into TXQ operation register */
+	writel(reg_val, ioaddr + SXGBE_MTL_TXQ_OPMODE_REG(queue_num));
+}
+
+static void sxgbe_set_rx_mtl_mode(void __iomem *ioaddr, int queue_num,
+				  int rx_mode)
+{
+	u32 reg_val;
+
+	reg_val = readl(ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num));
+	/* RX specific MTL mode settings */
+	if (rx_mode == SXGBE_RX_MTL_SFMODE) {
+		reg_val |= SXGBE_RX_MTL_SFMODE;
+	} else {
+		if (rx_mode <= 64)
+			reg_val |= MTL_CONTROL_RTC_64;
+		else if (rx_mode <= 96)
+			reg_val |= MTL_CONTROL_RTC_96;
+		else if (rx_mode <= 128)
+			reg_val |= MTL_CONTROL_RTC_128;
+	}
+
+	/* write into RXQ operation register */
+	writel(reg_val, ioaddr + SXGBE_MTL_RXQ_OPMODE_REG(queue_num));
+}
+
+static const struct sxgbe_mtl_ops mtl_ops = {
+	.mtl_set_txfifosize		= sxgbe_mtl_set_txfifosize,
+	.mtl_set_rxfifosize		= sxgbe_mtl_set_rxfifosize,
+	.mtl_enable_txqueue		= sxgbe_mtl_enable_txqueue,
+	.mtl_disable_txqueue		= sxgbe_mtl_disable_txqueue,
+	.mtl_dynamic_dma_rxqueue	= sxgbe_mtl_dma_dm_rxqueue,
+	.set_tx_mtl_mode		= sxgbe_set_tx_mtl_mode,
+	.set_rx_mtl_mode		= sxgbe_set_rx_mtl_mode,
+	.mtl_init			= sxgbe_mtl_init,
+	.mtl_fc_active			= sxgbe_mtl_fc_active,
+	.mtl_fc_deactive		= sxgbe_mtl_fc_deactive,
+	.mtl_fc_enable			= sxgbe_mtl_fc_enable,
+	.mtl_fep_enable			= sxgbe_mtl_fep_enable,
+	.mtl_fep_disable		= sxgbe_mtl_fep_disable,
+	.mtl_fup_enable			= sxgbe_mtl_fup_enable,
+	.mtl_fup_disable		= sxgbe_mtl_fup_disable
+};
+
+const struct sxgbe_mtl_ops *sxgbe_get_mtl_ops(void)
+{
+	return &mtl_ops;
+}
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_mtl.h b/drivers/net/ethernet/samsung/sxgbe/sxgbe_mtl.h
new file mode 100644
index 000000000000..7e4810c4137e
--- /dev/null
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_mtl.h
@@ -0,0 +1,104 @@
+/* 10G controller driver for Samsung SoCs
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Siva Reddy Kallam <siva.kallam@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __SXGBE_MTL_H__
+#define __SXGBE_MTL_H__
+
+#define SXGBE_MTL_OPMODE_ESTMASK	0x3
+#define SXGBE_MTL_OPMODE_RAAMASK	0x1
+#define SXGBE_MTL_FCMASK		0x7
+#define SXGBE_MTL_TX_FIFO_DIV		256
+#define SXGBE_MTL_RX_FIFO_DIV		256
+
+#define SXGBE_MTL_RXQ_OP_FEP		BIT(4)
+#define SXGBE_MTL_RXQ_OP_FUP		BIT(3)
+#define SXGBE_MTL_ENABLE_FC		0x80
+
+#define ETS_WRR				0xFFFFFF9F
+#define ETS_RST				0xFFFFFF9F
+#define ETS_WFQ				0x00000020
+#define ETS_DWRR			0x00000040
+#define RAA_SP				0xFFFFFFFB
+#define RAA_WSP				0x00000004
+
+#define RX_QUEUE_DYNAMIC		0x80808080
+#define RX_FC_ACTIVE			8
+#define RX_FC_DEACTIVE			13
+
+enum ttc_control {
+	MTL_CONTROL_TTC_64 = 0x00000000,
+	MTL_CONTROL_TTC_96 = 0x00000020,
+	MTL_CONTROL_TTC_128 = 0x00000030,
+	MTL_CONTROL_TTC_192 = 0x00000040,
+	MTL_CONTROL_TTC_256 = 0x00000050,
+	MTL_CONTROL_TTC_384 = 0x00000060,
+	MTL_CONTROL_TTC_512 = 0x00000070,
+};
+
+enum rtc_control {
+	MTL_CONTROL_RTC_64 = 0x00000000,
+	MTL_CONTROL_RTC_96 = 0x00000002,
+	MTL_CONTROL_RTC_128 = 0x00000003,
+};
+
+enum flow_control_th {
+	MTL_FC_FULL_1K = 0x00000000,
+	MTL_FC_FULL_2K = 0x00000001,
+	MTL_FC_FULL_4K = 0x00000002,
+	MTL_FC_FULL_5K = 0x00000003,
+	MTL_FC_FULL_6K = 0x00000004,
+	MTL_FC_FULL_8K = 0x00000005,
+	MTL_FC_FULL_16K = 0x00000006,
+	MTL_FC_FULL_24K = 0x00000007,
+};
+
+struct sxgbe_mtl_ops {
+	void (*mtl_init)(void __iomem *ioaddr, unsigned int etsalg,
+			 unsigned int raa);
+
+	void (*mtl_set_txfifosize)(void __iomem *ioaddr, int queue_num,
+				   int mtl_fifo);
+
+	void (*mtl_set_rxfifosize)(void __iomem *ioaddr, int queue_num,
+				   int queue_fifo);
+
+	void (*mtl_enable_txqueue)(void __iomem *ioaddr, int queue_num);
+
+	void (*mtl_disable_txqueue)(void __iomem *ioaddr, int queue_num);
+
+	void (*set_tx_mtl_mode)(void __iomem *ioaddr, int queue_num,
+				int tx_mode);
+
+	void (*set_rx_mtl_mode)(void __iomem *ioaddr, int queue_num,
+				int rx_mode);
+
+	void (*mtl_dynamic_dma_rxqueue)(void __iomem *ioaddr);
+
+	void (*mtl_fc_active)(void __iomem *ioaddr, int queue_num,
+			      int threshold);
+
+	void (*mtl_fc_deactive)(void __iomem *ioaddr, int queue_num,
+				int threshold);
+
+	void (*mtl_fc_enable)(void __iomem *ioaddr, int queue_num);
+
+	void (*mtl_fep_enable)(void __iomem *ioaddr, int queue_num);
+
+	void (*mtl_fep_disable)(void __iomem *ioaddr, int queue_num);
+
+	void (*mtl_fup_enable)(void __iomem *ioaddr, int queue_num);
+
+	void (*mtl_fup_disable)(void __iomem *ioaddr, int queue_num);
+};
+
+const struct sxgbe_mtl_ops *sxgbe_get_mtl_ops(void);
+
+#endif /* __SXGBE_MTL_H__ */
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c
new file mode 100644
index 000000000000..f5a9de710052
--- /dev/null
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c
@@ -0,0 +1,253 @@
+/* 10G controller driver for Samsung SoCs
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Siva Reddy Kallam <siva.kallam@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/etherdevice.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_net.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <linux/sxgbe_platform.h>
+
+#include "sxgbe_common.h"
+#include "sxgbe_reg.h"
+
+#ifdef CONFIG_OF
+static int sxgbe_probe_config_dt(struct platform_device *pdev,
+				 struct sxgbe_plat_data *plat,
+				 const char **mac)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct sxgbe_dma_cfg *dma_cfg;
+
+	if (!np)
+		return -ENODEV;
+
+	*mac = of_get_mac_address(np);
+	plat->interface = of_get_phy_mode(np);
+
+	plat->bus_id = of_alias_get_id(np, "ethernet");
+	if (plat->bus_id < 0)
+		plat->bus_id = 0;
+
+	plat->mdio_bus_data = devm_kzalloc(&pdev->dev,
+					   sizeof(*plat->mdio_bus_data),
+					   GFP_KERNEL);
+
+	dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*dma_cfg), GFP_KERNEL);
+	if (!dma_cfg)
+		return -ENOMEM;
+
+	plat->dma_cfg = dma_cfg;
+	of_property_read_u32(np, "samsung,pbl", &dma_cfg->pbl);
+	if (of_property_read_u32(np, "samsung,burst-map", &dma_cfg->burst_map) == 0)
+		dma_cfg->fixed_burst = true;
+
+	return 0;
+}
+#else
+static int sxgbe_probe_config_dt(struct platform_device *pdev,
+				 struct sxgbe_plat_data *plat,
+				 const char **mac)
+{
+	return -ENOSYS;
+}
+#endif /* CONFIG_OF */
+
+/**
+ * sxgbe_platform_probe
+ * @pdev: platform device pointer
+ * Description: platform_device probe function. It allocates
+ * the necessary resources and invokes the main to init
+ * the net device, register the mdio bus etc.
+ */
+static int sxgbe_platform_probe(struct platform_device *pdev)
+{
+	int ret;
+	int i, chan;
+	struct resource *res;
+	struct device *dev = &pdev->dev;
+	void __iomem *addr;
+	struct sxgbe_priv_data *priv = NULL;
+	struct sxgbe_plat_data *plat_dat = NULL;
+	const char *mac = NULL;
+	struct net_device *ndev = platform_get_drvdata(pdev);
+	struct device_node *node = dev->of_node;
+
+	/* Get memory resource */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		goto err_out;
+
+	addr = devm_ioremap_resource(dev, res);
+	if (IS_ERR(addr))
+		return PTR_ERR(addr);
+
+	if (pdev->dev.of_node) {
+		plat_dat = devm_kzalloc(&pdev->dev,
+					sizeof(struct sxgbe_plat_data),
+					GFP_KERNEL);
+		if (!plat_dat)
+			return  -ENOMEM;
+
+		ret = sxgbe_probe_config_dt(pdev, plat_dat, &mac);
+		if (ret) {
+			pr_err("%s: main dt probe failed\n", __func__);
+			return ret;
+		}
+	}
+
+	/* Get MAC address if available (DT) */
+	if (mac)
+		ether_addr_copy(priv->dev->dev_addr, mac);
+
+	priv = sxgbe_drv_probe(&(pdev->dev), plat_dat, addr);
+	if (!priv) {
+		pr_err("%s: main driver probe failed\n", __func__);
+		goto err_out;
+	}
+
+	/* Get the SXGBE common INT information */
+	priv->irq  = irq_of_parse_and_map(node, 0);
+	if (priv->irq <= 0) {
+		dev_err(dev, "sxgbe common irq parsing failed\n");
+		goto err_drv_remove;
+	}
+
+	/* Get the TX/RX IRQ numbers */
+	for (i = 0, chan = 1; i < SXGBE_TX_QUEUES; i++) {
+		priv->txq[i]->irq_no = irq_of_parse_and_map(node, chan++);
+		if (priv->txq[i]->irq_no <= 0) {
+			dev_err(dev, "sxgbe tx irq parsing failed\n");
+			goto err_tx_irq_unmap;
+		}
+	}
+
+	for (i = 0; i < SXGBE_RX_QUEUES; i++) {
+		priv->rxq[i]->irq_no = irq_of_parse_and_map(node, chan++);
+		if (priv->rxq[i]->irq_no <= 0) {
+			dev_err(dev, "sxgbe rx irq parsing failed\n");
+			goto err_rx_irq_unmap;
+		}
+	}
+
+	platform_set_drvdata(pdev, priv->dev);
+
+	pr_debug("platform driver registration completed\n");
+
+	return 0;
+
+err_rx_irq_unmap:
+	while (--i)
+		irq_dispose_mapping(priv->rxq[i]->irq_no);
+	i = SXGBE_TX_QUEUES;
+err_tx_irq_unmap:
+	while (--i)
+		irq_dispose_mapping(priv->txq[i]->irq_no);
+	irq_dispose_mapping(priv->irq);
+err_drv_remove:
+	sxgbe_drv_remove(ndev);
+err_out:
+	return -ENODEV;
+}
+
+/**
+ * sxgbe_platform_remove
+ * @pdev: platform device pointer
+ * Description: this function calls the main to free the net resources
+ * and calls the platforms hook and release the resources (e.g. mem).
+ */
+static int sxgbe_platform_remove(struct platform_device *pdev)
+{
+	struct net_device *ndev = platform_get_drvdata(pdev);
+	int ret = sxgbe_drv_remove(ndev);
+
+	return ret;
+}
+
+#ifdef CONFIG_PM
+static int sxgbe_platform_suspend(struct device *dev)
+{
+	struct net_device *ndev = dev_get_drvdata(dev);
+
+	return sxgbe_suspend(ndev);
+}
+
+static int sxgbe_platform_resume(struct device *dev)
+{
+	struct net_device *ndev = dev_get_drvdata(dev);
+
+	return sxgbe_resume(ndev);
+}
+
+int sxgbe_platform_freeze(struct device *dev)
+{
+	struct net_device *ndev = dev_get_drvdata(dev);
+
+	return sxgbe_freeze(ndev);
+}
+
+int sxgbe_platform_restore(struct device *dev)
+{
+	struct net_device *ndev = dev_get_drvdata(dev);
+
+	return sxgbe_restore(ndev);
+}
+
+static const struct dev_pm_ops sxgbe_platform_pm_ops = {
+	.suspend	= sxgbe_platform_suspend,
+	.resume		= sxgbe_platform_resume,
+	.freeze		= sxgbe_platform_freeze,
+	.thaw		= sxgbe_platform_restore,
+	.restore	= sxgbe_platform_restore,
+};
+#else
+static const struct dev_pm_ops sxgbe_platform_pm_ops;
+#endif /* CONFIG_PM */
+
+static const struct of_device_id sxgbe_dt_ids[] = {
+	{ .compatible = "samsung,sxgbe-v2.0a"},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, sxgbe_dt_ids);
+
+struct platform_driver sxgbe_platform_driver = {
+	.probe	= sxgbe_platform_probe,
+	.remove	= sxgbe_platform_remove,
+	.driver	= {
+		.name		= SXGBE_RESOURCE_NAME,
+		.owner		= THIS_MODULE,
+		.pm		= &sxgbe_platform_pm_ops,
+		.of_match_table	= of_match_ptr(sxgbe_dt_ids),
+	},
+};
+
+int sxgbe_register_platform(void)
+{
+	int err;
+
+	err = platform_driver_register(&sxgbe_platform_driver);
+	if (err)
+		pr_err("failed to register the platform driver\n");
+
+	return err;
+}
+
+void sxgbe_unregister_platform(void)
+{
+	platform_driver_unregister(&sxgbe_platform_driver);
+}
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_reg.h b/drivers/net/ethernet/samsung/sxgbe/sxgbe_reg.h
new file mode 100644
index 000000000000..d1cd9ac1b062
--- /dev/null
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_reg.h
@@ -0,0 +1,477 @@
+/* 10G controller driver for Samsung SoCs
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Siva Reddy Kallam <siva.kallam@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __SXGBE_REGMAP_H__
+#define __SXGBE_REGMAP_H__
+
+/* SXGBE MAC Registers */
+#define SXGBE_CORE_TX_CONFIG_REG	0x0000
+#define SXGBE_CORE_RX_CONFIG_REG	0x0004
+#define SXGBE_CORE_PKT_FILTER_REG	0x0008
+#define SXGBE_CORE_WATCHDOG_TIMEOUT_REG 0x000C
+#define SXGBE_CORE_HASH_TABLE_REG0	0x0010
+#define SXGBE_CORE_HASH_TABLE_REG1	0x0014
+#define SXGBE_CORE_HASH_TABLE_REG2	0x0018
+#define SXGBE_CORE_HASH_TABLE_REG3	0x001C
+#define SXGBE_CORE_HASH_TABLE_REG4	0x0020
+#define SXGBE_CORE_HASH_TABLE_REG5	0x0024
+#define SXGBE_CORE_HASH_TABLE_REG6	0x0028
+#define SXGBE_CORE_HASH_TABLE_REG7	0x002C
+/* VLAN Specific Registers */
+#define SXGBE_CORE_VLAN_TAG_REG		0x0050
+#define SXGBE_CORE_VLAN_HASHTAB_REG	0x0058
+#define SXGBE_CORE_VLAN_INSCTL_REG	0x0060
+#define SXGBE_CORE_VLAN_INNERCTL_REG	0x0064
+#define SXGBE_CORE_RX_ETHTYPE_MATCH_REG 0x006C
+
+/* Flow Contol Registers */
+#define SXGBE_CORE_TX_Q0_FLOWCTL_REG	0x0070
+#define SXGBE_CORE_TX_Q1_FLOWCTL_REG	0x0074
+#define SXGBE_CORE_TX_Q2_FLOWCTL_REG	0x0078
+#define SXGBE_CORE_TX_Q3_FLOWCTL_REG	0x007C
+#define SXGBE_CORE_TX_Q4_FLOWCTL_REG	0x0080
+#define SXGBE_CORE_TX_Q5_FLOWCTL_REG	0x0084
+#define SXGBE_CORE_TX_Q6_FLOWCTL_REG	0x0088
+#define SXGBE_CORE_TX_Q7_FLOWCTL_REG	0x008C
+#define SXGBE_CORE_RX_FLOWCTL_REG	0x0090
+#define SXGBE_CORE_RX_CTL0_REG		0x00A0
+#define SXGBE_CORE_RX_CTL1_REG		0x00A4
+#define SXGBE_CORE_RX_CTL2_REG		0x00A8
+#define SXGBE_CORE_RX_CTL3_REG		0x00AC
+
+/* Interrupt Registers */
+#define SXGBE_CORE_INT_STATUS_REG	0x00B0
+#define SXGBE_CORE_INT_ENABLE_REG	0x00B4
+#define SXGBE_CORE_RXTX_ERR_STATUS_REG	0x00B8
+#define SXGBE_CORE_PMT_CTL_STATUS_REG	0x00C0
+#define SXGBE_CORE_RWK_PKT_FILTER_REG	0x00C4
+#define SXGBE_CORE_VERSION_REG		0x0110
+#define SXGBE_CORE_DEBUG_REG		0x0114
+#define SXGBE_CORE_HW_FEA_REG(index)	(0x011C + index * 4)
+
+/* SMA(MDIO) module registers */
+#define SXGBE_MDIO_SCMD_ADD_REG		0x0200
+#define SXGBE_MDIO_SCMD_DATA_REG	0x0204
+#define SXGBE_MDIO_CCMD_WADD_REG	0x0208
+#define SXGBE_MDIO_CCMD_WDATA_REG	0x020C
+#define SXGBE_MDIO_CSCAN_PORT_REG	0x0210
+#define SXGBE_MDIO_INT_STATUS_REG	0x0214
+#define SXGBE_MDIO_INT_ENABLE_REG	0x0218
+#define SXGBE_MDIO_PORT_CONDCON_REG	0x021C
+#define SXGBE_MDIO_CLAUSE22_PORT_REG	0x0220
+
+/* port specific, addr = 0-3 */
+#define SXGBE_MDIO_DEV_BASE_REG		0x0230
+#define SXGBE_MDIO_PORT_DEV_REG(addr)			\
+	(SXGBE_MDIO_DEV_BASE_REG + (0x10 * addr) + 0x0)
+#define SXGBE_MDIO_PORT_LSTATUS_REG(addr)		\
+	(SXGBE_MDIO_DEV_BASE_REG + (0x10 * addr) + 0x4)
+#define SXGBE_MDIO_PORT_ALIVE_REG(addr)			\
+	(SXGBE_MDIO_DEV_BASE_REG + (0x10 * addr) + 0x8)
+
+#define SXGBE_CORE_GPIO_CTL_REG		0x0278
+#define SXGBE_CORE_GPIO_STATUS_REG	0x027C
+
+/* Address registers for filtering */
+#define SXGBE_CORE_ADD_BASE_REG		0x0300
+
+/* addr = 0-31 */
+#define SXGBE_CORE_ADD_HIGHOFFSET(addr)			\
+	(SXGBE_CORE_ADD_BASE_REG + (0x8 * addr) + 0x0)
+#define SXGBE_CORE_ADD_LOWOFFSET(addr)			\
+	(SXGBE_CORE_ADD_BASE_REG + (0x8 * addr) + 0x4)
+
+/* SXGBE MMC registers */
+#define SXGBE_MMC_CTL_REG		0x0800
+#define SXGBE_MMC_RXINT_STATUS_REG	0x0804
+#define SXGBE_MMC_TXINT_STATUS_REG	0x0808
+#define SXGBE_MMC_RXINT_ENABLE_REG	0x080C
+#define SXGBE_MMC_TXINT_ENABLE_REG	0x0810
+
+/* TX specific counters */
+#define SXGBE_MMC_TXOCTETHI_GBCNT_REG	0x0814
+#define SXGBE_MMC_TXOCTETLO_GBCNT_REG	0x0818
+#define SXGBE_MMC_TXFRAMELO_GBCNT_REG	0x081C
+#define SXGBE_MMC_TXFRAMEHI_GBCNT_REG	0x0820
+#define SXGBE_MMC_TXBROADLO_GCNT_REG	0x0824
+#define SXGBE_MMC_TXBROADHI_GCNT_REG	0x0828
+#define SXGBE_MMC_TXMULTILO_GCNT_REG	0x082C
+#define SXGBE_MMC_TXMULTIHI_GCNT_REG	0x0830
+#define SXGBE_MMC_TX64LO_GBCNT_REG	0x0834
+#define SXGBE_MMC_TX64HI_GBCNT_REG	0x0838
+#define SXGBE_MMC_TX65TO127LO_GBCNT_REG		0x083C
+#define SXGBE_MMC_TX65TO127HI_GBCNT_REG		0x0840
+#define SXGBE_MMC_TX128TO255LO_GBCNT_REG	0x0844
+#define SXGBE_MMC_TX128TO255HI_GBCNT_REG	0x0848
+#define SXGBE_MMC_TX256TO511LO_GBCNT_REG	0x084C
+#define SXGBE_MMC_TX256TO511HI_GBCNT_REG	0x0850
+#define SXGBE_MMC_TX512TO1023LO_GBCNT_REG	0x0854
+#define SXGBE_MMC_TX512TO1023HI_GBCNT_REG	0x0858
+#define SXGBE_MMC_TX1023TOMAXLO_GBCNT_REG	0x085C
+#define SXGBE_MMC_TX1023TOMAXHI_GBCNT_REG	0x0860
+#define SXGBE_MMC_TXUNICASTLO_GBCNT_REG		0x0864
+#define SXGBE_MMC_TXUNICASTHI_GBCNT_REG		0x0868
+#define SXGBE_MMC_TXMULTILO_GBCNT_REG		0x086C
+#define SXGBE_MMC_TXMULTIHI_GBCNT_REG		0x0870
+#define SXGBE_MMC_TXBROADLO_GBCNT_REG		0x0874
+#define SXGBE_MMC_TXBROADHI_GBCNT_REG		0x0878
+#define SXGBE_MMC_TXUFLWLO_GBCNT_REG		0x087C
+#define SXGBE_MMC_TXUFLWHI_GBCNT_REG		0x0880
+#define SXGBE_MMC_TXOCTETLO_GCNT_REG	0x0884
+#define SXGBE_MMC_TXOCTETHI_GCNT_REG	0x0888
+#define SXGBE_MMC_TXFRAMELO_GCNT_REG	0x088C
+#define SXGBE_MMC_TXFRAMEHI_GCNT_REG	0x0890
+#define SXGBE_MMC_TXPAUSELO_CNT_REG	0x0894
+#define SXGBE_MMC_TXPAUSEHI_CNT_REG	0x0898
+#define SXGBE_MMC_TXVLANLO_GCNT_REG	0x089C
+#define SXGBE_MMC_TXVLANHI_GCNT_REG	0x08A0
+
+/* RX specific counters */
+#define SXGBE_MMC_RXFRAMELO_GBCNT_REG	0x0900
+#define SXGBE_MMC_RXFRAMEHI_GBCNT_REG	0x0904
+#define SXGBE_MMC_RXOCTETLO_GBCNT_REG	0x0908
+#define SXGBE_MMC_RXOCTETHI_GBCNT_REG	0x090C
+#define SXGBE_MMC_RXOCTETLO_GCNT_REG	0x0910
+#define SXGBE_MMC_RXOCTETHI_GCNT_REG	0x0914
+#define SXGBE_MMC_RXBROADLO_GCNT_REG	0x0918
+#define SXGBE_MMC_RXBROADHI_GCNT_REG	0x091C
+#define SXGBE_MMC_RXMULTILO_GCNT_REG	0x0920
+#define SXGBE_MMC_RXMULTIHI_GCNT_REG	0x0924
+#define SXGBE_MMC_RXCRCERRLO_REG	0x0928
+#define SXGBE_MMC_RXCRCERRHI_REG	0x092C
+#define SXGBE_MMC_RXSHORT64BFRAME_ERR_REG	0x0930
+#define SXGBE_MMC_RXJABBERERR_REG		0x0934
+#define SXGBE_MMC_RXSHORT64BFRAME_COR_REG	0x0938
+#define SXGBE_MMC_RXOVERMAXFRAME_COR_REG	0x093C
+#define SXGBE_MMC_RX64LO_GBCNT_REG		0x0940
+#define SXGBE_MMC_RX64HI_GBCNT_REG		0x0944
+#define SXGBE_MMC_RX65TO127LO_GBCNT_REG		0x0948
+#define SXGBE_MMC_RX65TO127HI_GBCNT_REG		0x094C
+#define SXGBE_MMC_RX128TO255LO_GBCNT_REG	0x0950
+#define SXGBE_MMC_RX128TO255HI_GBCNT_REG	0x0954
+#define SXGBE_MMC_RX256TO511LO_GBCNT_REG	0x0958
+#define SXGBE_MMC_RX256TO511HI_GBCNT_REG	0x095C
+#define SXGBE_MMC_RX512TO1023LO_GBCNT_REG	0x0960
+#define SXGBE_MMC_RX512TO1023HI_GBCNT_REG	0x0964
+#define SXGBE_MMC_RX1023TOMAXLO_GBCNT_REG	0x0968
+#define SXGBE_MMC_RX1023TOMAXHI_GBCNT_REG	0x096C
+#define SXGBE_MMC_RXUNICASTLO_GCNT_REG		0x0970
+#define SXGBE_MMC_RXUNICASTHI_GCNT_REG		0x0974
+#define SXGBE_MMC_RXLENERRLO_REG		0x0978
+#define SXGBE_MMC_RXLENERRHI_REG		0x097C
+#define SXGBE_MMC_RXOUTOFRANGETYPELO_REG	0x0980
+#define SXGBE_MMC_RXOUTOFRANGETYPEHI_REG	0x0984
+#define SXGBE_MMC_RXPAUSELO_CNT_REG		0x0988
+#define SXGBE_MMC_RXPAUSEHI_CNT_REG		0x098C
+#define SXGBE_MMC_RXFIFOOVERFLOWLO_GBCNT_REG	0x0990
+#define SXGBE_MMC_RXFIFOOVERFLOWHI_GBCNT_REG	0x0994
+#define SXGBE_MMC_RXVLANLO_GBCNT_REG		0x0998
+#define SXGBE_MMC_RXVLANHI_GBCNT_REG		0x099C
+#define SXGBE_MMC_RXWATCHDOG_ERR_REG		0x09A0
+
+/* L3/L4 function registers */
+#define SXGBE_CORE_L34_ADDCTL_REG	0x0C00
+#define SXGBE_CORE_L34_ADDCTL_REG	0x0C00
+#define SXGBE_CORE_L34_DATA_REG		0x0C04
+
+/* ARP registers */
+#define SXGBE_CORE_ARP_ADD_REG		0x0C10
+
+/* RSS registers */
+#define SXGBE_CORE_RSS_CTL_REG		0x0C80
+#define SXGBE_CORE_RSS_ADD_REG		0x0C88
+#define SXGBE_CORE_RSS_DATA_REG		0x0C8C
+
+/* IEEE 1588 registers */
+#define SXGBE_CORE_TSTAMP_CTL_REG	0x0D00
+#define SXGBE_CORE_SUBSEC_INC_REG	0x0D04
+#define SXGBE_CORE_SYSTIME_SEC_REG	0x0D0C
+#define SXGBE_CORE_SYSTIME_NSEC_REG	0x0D10
+#define SXGBE_CORE_SYSTIME_SECUP_REG	0x0D14
+#define SXGBE_CORE_TSTAMP_ADD_REG	0x0D18
+#define SXGBE_CORE_SYSTIME_HWORD_REG	0x0D1C
+#define SXGBE_CORE_TSTAMP_STATUS_REG	0x0D20
+#define SXGBE_CORE_TXTIME_STATUSNSEC_REG 0x0D30
+#define SXGBE_CORE_TXTIME_STATUSSEC_REG	0x0D34
+
+/* Auxiliary registers */
+#define SXGBE_CORE_AUX_CTL_REG			 0x0D40
+#define SXGBE_CORE_AUX_TSTAMP_NSEC_REG		 0x0D48
+#define SXGBE_CORE_AUX_TSTAMP_SEC_REG		 0x0D4C
+#define SXGBE_CORE_AUX_TSTAMP_INGCOR_REG	 0x0D50
+#define SXGBE_CORE_AUX_TSTAMP_ENGCOR_REG	 0x0D54
+#define SXGBE_CORE_AUX_TSTAMP_INGCOR_NSEC_REG	 0x0D58
+#define SXGBE_CORE_AUX_TSTAMP_INGCOR_SUBNSEC_REG 0x0D5C
+#define SXGBE_CORE_AUX_TSTAMP_ENGCOR_NSEC_REG	 0x0D60
+#define SXGBE_CORE_AUX_TSTAMP_ENGCOR_SUBNSEC_REG 0x0D64
+
+/* PPS registers */
+#define SXGBE_CORE_PPS_CTL_REG		0x0D70
+#define SXGBE_CORE_PPS_BASE			0x0D80
+
+/* addr = 0 - 3 */
+#define SXGBE_CORE_PPS_TTIME_SEC_REG(addr)		\
+	(SXGBE_CORE_PPS_BASE + (0x10 * addr) + 0x0)
+#define SXGBE_CORE_PPS_TTIME_NSEC_REG(addr)		\
+	(SXGBE_CORE_PPS_BASE + (0x10 * addr) + 0x4)
+#define SXGBE_CORE_PPS_INTERVAL_REG(addr)		\
+	(SXGBE_CORE_PPS_BASE + (0x10 * addr) + 0x8)
+#define SXGBE_CORE_PPS_WIDTH_REG(addr)			\
+	(SXGBE_CORE_PPS_BASE + (0x10 * addr) + 0xC)
+#define SXGBE_CORE_PTO_CTL_REG		0x0DC0
+#define SXGBE_CORE_SRCPORT_ITY0_REG	0x0DC4
+#define SXGBE_CORE_SRCPORT_ITY1_REG	0x0DC8
+#define SXGBE_CORE_SRCPORT_ITY2_REG	0x0DCC
+#define SXGBE_CORE_LOGMSG_LEVEL_REG	0x0DD0
+
+/* SXGBE MTL Registers */
+#define SXGBE_MTL_BASE_REG		0x1000
+#define SXGBE_MTL_OP_MODE_REG		(SXGBE_MTL_BASE_REG + 0x0000)
+#define SXGBE_MTL_DEBUG_CTL_REG		(SXGBE_MTL_BASE_REG + 0x0008)
+#define SXGBE_MTL_DEBUG_STATUS_REG	(SXGBE_MTL_BASE_REG + 0x000C)
+#define SXGBE_MTL_FIFO_DEBUGDATA_REG	(SXGBE_MTL_BASE_REG + 0x0010)
+#define SXGBE_MTL_INT_STATUS_REG	(SXGBE_MTL_BASE_REG + 0x0020)
+#define SXGBE_MTL_RXQ_DMAMAP0_REG	(SXGBE_MTL_BASE_REG + 0x0030)
+#define SXGBE_MTL_RXQ_DMAMAP1_REG	(SXGBE_MTL_BASE_REG + 0x0034)
+#define SXGBE_MTL_RXQ_DMAMAP2_REG	(SXGBE_MTL_BASE_REG + 0x0038)
+#define SXGBE_MTL_TX_PRTYMAP0_REG	(SXGBE_MTL_BASE_REG + 0x0040)
+#define SXGBE_MTL_TX_PRTYMAP1_REG	(SXGBE_MTL_BASE_REG + 0x0044)
+
+/* TC/Queue registers, qnum=0-15 */
+#define SXGBE_MTL_TC_TXBASE_REG		(SXGBE_MTL_BASE_REG + 0x0100)
+#define SXGBE_MTL_TXQ_OPMODE_REG(qnum)				\
+	(SXGBE_MTL_TC_TXBASE_REG + (qnum * 0x80) + 0x00)
+#define SXGBE_MTL_SFMODE		BIT(1)
+#define SXGBE_MTL_FIFO_LSHIFT		16
+#define SXGBE_MTL_ENABLE_QUEUE		0x00000008
+#define SXGBE_MTL_TXQ_UNDERFLOW_REG(qnum)			\
+	(SXGBE_MTL_TC_TXBASE_REG + (qnum * 0x80) + 0x04)
+#define SXGBE_MTL_TXQ_DEBUG_REG(qnum)				\
+	(SXGBE_MTL_TC_TXBASE_REG + (qnum * 0x80) + 0x08)
+#define SXGBE_MTL_TXQ_ETSCTL_REG(qnum)				\
+	(SXGBE_MTL_TC_TXBASE_REG + (qnum * 0x80) + 0x10)
+#define SXGBE_MTL_TXQ_ETSSTATUS_REG(qnum)			\
+	(SXGBE_MTL_TC_TXBASE_REG + (qnum * 0x80) + 0x14)
+#define SXGBE_MTL_TXQ_QUANTWEIGHT_REG(qnum)			\
+	(SXGBE_MTL_TC_TXBASE_REG + (qnum * 0x80) + 0x18)
+
+#define SXGBE_MTL_TC_RXBASE_REG		0x1140
+#define SXGBE_RX_MTL_SFMODE		BIT(5)
+#define SXGBE_MTL_RXQ_OPMODE_REG(qnum)				\
+	(SXGBE_MTL_TC_RXBASE_REG + (qnum * 0x80) + 0x00)
+#define SXGBE_MTL_RXQ_MISPKTOVERFLOW_REG(qnum)			\
+	(SXGBE_MTL_TC_RXBASE_REG + (qnum * 0x80) + 0x04)
+#define SXGBE_MTL_RXQ_DEBUG_REG(qnum)				\
+	(SXGBE_MTL_TC_RXBASE_REG + (qnum * 0x80) + 0x08)
+#define SXGBE_MTL_RXQ_CTL_REG(qnum)				\
+	(SXGBE_MTL_TC_RXBASE_REG + (qnum * 0x80) + 0x0C)
+#define SXGBE_MTL_RXQ_INTENABLE_REG(qnum)			\
+	(SXGBE_MTL_TC_RXBASE_REG + (qnum * 0x80) + 0x30)
+#define SXGBE_MTL_RXQ_INTSTATUS_REG(qnum)			\
+	(SXGBE_MTL_TC_RXBASE_REG + (qnum * 0x80) + 0x34)
+
+/* SXGBE DMA Registers */
+#define SXGBE_DMA_BASE_REG		0x3000
+#define SXGBE_DMA_MODE_REG		(SXGBE_DMA_BASE_REG + 0x0000)
+#define SXGBE_DMA_SOFT_RESET		BIT(0)
+#define SXGBE_DMA_SYSBUS_MODE_REG	(SXGBE_DMA_BASE_REG + 0x0004)
+#define SXGBE_DMA_AXI_UNDEF_BURST	BIT(0)
+#define SXGBE_DMA_ENHACE_ADDR_MODE	BIT(11)
+#define SXGBE_DMA_INT_STATUS_REG	(SXGBE_DMA_BASE_REG + 0x0008)
+#define SXGBE_DMA_AXI_ARCACHECTL_REG	(SXGBE_DMA_BASE_REG + 0x0010)
+#define SXGBE_DMA_AXI_AWCACHECTL_REG	(SXGBE_DMA_BASE_REG + 0x0018)
+#define SXGBE_DMA_DEBUG_STATUS0_REG	(SXGBE_DMA_BASE_REG + 0x0020)
+#define SXGBE_DMA_DEBUG_STATUS1_REG	(SXGBE_DMA_BASE_REG + 0x0024)
+#define SXGBE_DMA_DEBUG_STATUS2_REG	(SXGBE_DMA_BASE_REG + 0x0028)
+#define SXGBE_DMA_DEBUG_STATUS3_REG	(SXGBE_DMA_BASE_REG + 0x002C)
+#define SXGBE_DMA_DEBUG_STATUS4_REG	(SXGBE_DMA_BASE_REG + 0x0030)
+#define SXGBE_DMA_DEBUG_STATUS5_REG	(SXGBE_DMA_BASE_REG + 0x0034)
+
+/* Channel Registers, cha_num = 0-15 */
+#define SXGBE_DMA_CHA_BASE_REG			\
+	(SXGBE_DMA_BASE_REG + 0x0100)
+#define SXGBE_DMA_CHA_CTL_REG(cha_num)				\
+	(SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x00)
+#define SXGBE_DMA_PBL_X8MODE			BIT(16)
+#define SXGBE_DMA_CHA_TXCTL_TSE_ENABLE		BIT(12)
+#define SXGBE_DMA_CHA_TXCTL_REG(cha_num)			\
+	(SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x04)
+#define SXGBE_DMA_CHA_RXCTL_REG(cha_num)			\
+	(SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x08)
+#define SXGBE_DMA_CHA_TXDESC_HADD_REG(cha_num)			\
+	(SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x10)
+#define SXGBE_DMA_CHA_TXDESC_LADD_REG(cha_num)			\
+	(SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x14)
+#define SXGBE_DMA_CHA_RXDESC_HADD_REG(cha_num)			\
+	(SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x18)
+#define SXGBE_DMA_CHA_RXDESC_LADD_REG(cha_num)			\
+	(SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x1C)
+#define SXGBE_DMA_CHA_TXDESC_TAILPTR_REG(cha_num)		\
+	(SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x24)
+#define SXGBE_DMA_CHA_RXDESC_TAILPTR_REG(cha_num)		\
+	(SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x2C)
+#define SXGBE_DMA_CHA_TXDESC_RINGLEN_REG(cha_num)		\
+	(SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x30)
+#define SXGBE_DMA_CHA_RXDESC_RINGLEN_REG(cha_num)		\
+	(SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x34)
+#define SXGBE_DMA_CHA_INT_ENABLE_REG(cha_num)			\
+	(SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x38)
+#define SXGBE_DMA_CHA_INT_RXWATCHTMR_REG(cha_num)		\
+	(SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x3C)
+#define SXGBE_DMA_CHA_TXDESC_CURADDLO_REG(cha_num)		\
+	(SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x44)
+#define SXGBE_DMA_CHA_RXDESC_CURADDLO_REG(cha_num)		\
+	(SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x4C)
+#define SXGBE_DMA_CHA_CURTXBUF_ADDHI_REG(cha_num)		\
+	(SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x50)
+#define SXGBE_DMA_CHA_CURTXBUF_ADDLO_REG(cha_num)		\
+	(SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x54)
+#define SXGBE_DMA_CHA_CURRXBUF_ADDHI_REG(cha_num)		\
+	(SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x58)
+#define SXGBE_DMA_CHA_CURRXBUF_ADDLO_REG(cha_num)		\
+	(SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x5C)
+#define SXGBE_DMA_CHA_STATUS_REG(cha_num)			\
+	(SXGBE_DMA_CHA_BASE_REG + (cha_num * 0x80) + 0x60)
+
+/* TX DMA control register specific */
+#define SXGBE_TX_START_DMA	BIT(0)
+
+/* sxgbe tx configuration register bitfields */
+#define SXGBE_SPEED_10G		0x0
+#define SXGBE_SPEED_2_5G	0x1
+#define SXGBE_SPEED_1G		0x2
+#define SXGBE_SPEED_LSHIFT	29
+
+#define SXGBE_TX_ENABLE		BIT(0)
+#define SXGBE_TX_DISDIC_ALGO	BIT(1)
+#define SXGBE_TX_JABBER_DISABLE	BIT(16)
+
+/* sxgbe rx configuration register bitfields */
+#define SXGBE_RX_ENABLE		BIT(0)
+#define SXGBE_RX_ACS_ENABLE		BIT(1)
+#define SXGBE_RX_WATCHDOG_DISABLE	BIT(7)
+#define SXGBE_RX_JUMBPKT_ENABLE		BIT(8)
+#define SXGBE_RX_CSUMOFFLOAD_ENABLE	BIT(9)
+#define SXGBE_RX_LOOPBACK_ENABLE	BIT(10)
+#define SXGBE_RX_ARPOFFLOAD_ENABLE	BIT(31)
+
+/* sxgbe vlan Tag Register bitfields */
+#define SXGBE_VLAN_SVLAN_ENABLE		BIT(18)
+#define SXGBE_VLAN_DOUBLEVLAN_ENABLE	BIT(26)
+#define SXGBE_VLAN_INNERVLAN_ENABLE	BIT(27)
+
+/* XMAC VLAN Tag Inclusion Register(0x0060) bitfields
+ * Below fields same for  Inner VLAN Tag Inclusion
+ * Register(0x0064) register
+ */
+enum vlan_tag_ctl_tx {
+	VLAN_TAG_TX_NOP,
+	VLAN_TAG_TX_DEL,
+	VLAN_TAG_TX_INSERT,
+	VLAN_TAG_TX_REPLACE
+};
+#define SXGBE_VLAN_PRTY_CTL	BIT(18)
+#define SXGBE_VLAN_CSVL_CTL	BIT(19)
+
+/* SXGBE TX Q Flow Control Register bitfields */
+#define SXGBE_TX_FLOW_CTL_FCB	BIT(0)
+#define SXGBE_TX_FLOW_CTL_TFB	BIT(1)
+
+/* SXGBE RX Q Flow Control Register bitfields */
+#define SXGBE_RX_FLOW_CTL_ENABLE	BIT(0)
+#define SXGBE_RX_UNICAST_DETECT		BIT(1)
+#define SXGBE_RX_PRTYFLOW_CTL_ENABLE	BIT(8)
+
+/* sxgbe rx Q control0 register bitfields */
+#define SXGBE_RX_Q_ENABLE	0x2
+
+/* SXGBE hardware features bitfield specific */
+/* Capability Register 0 */
+#define SXGBE_HW_FEAT_GMII(cap)			((cap & 0x00000002) >> 1)
+#define SXGBE_HW_FEAT_VLAN_HASH_FILTER(cap)	((cap & 0x00000010) >> 4)
+#define SXGBE_HW_FEAT_SMA(cap)			((cap & 0x00000020) >> 5)
+#define SXGBE_HW_FEAT_PMT_TEMOTE_WOP(cap)	((cap & 0x00000040) >> 6)
+#define SXGBE_HW_FEAT_PMT_MAGIC_PKT(cap)	((cap & 0x00000080) >> 7)
+#define SXGBE_HW_FEAT_RMON(cap)			((cap & 0x00000100) >> 8)
+#define SXGBE_HW_FEAT_ARP_OFFLOAD(cap)		((cap & 0x00000200) >> 9)
+#define SXGBE_HW_FEAT_IEEE1500_2008(cap)	((cap & 0x00001000) >> 12)
+#define SXGBE_HW_FEAT_EEE(cap)			((cap & 0x00002000) >> 13)
+#define SXGBE_HW_FEAT_TX_CSUM_OFFLOAD(cap)	((cap & 0x00004000) >> 14)
+#define SXGBE_HW_FEAT_RX_CSUM_OFFLOAD(cap)	((cap & 0x00010000) >> 16)
+#define SXGBE_HW_FEAT_MACADDR_COUNT(cap)	((cap & 0x007C0000) >> 18)
+#define SXGBE_HW_FEAT_TSTMAP_SRC(cap)		((cap & 0x06000000) >> 25)
+#define SXGBE_HW_FEAT_SRCADDR_VLAN(cap)		((cap & 0x08000000) >> 27)
+
+/* Capability Register 1 */
+#define SXGBE_HW_FEAT_RX_FIFO_SIZE(cap)		((cap & 0x0000001F))
+#define SXGBE_HW_FEAT_TX_FIFO_SIZE(cap)		((cap & 0x000007C0) >> 6)
+#define SXGBE_HW_FEAT_IEEE1588_HWORD(cap)	((cap & 0x00002000) >> 13)
+#define SXGBE_HW_FEAT_DCB(cap)			((cap & 0x00010000) >> 16)
+#define SXGBE_HW_FEAT_SPLIT_HDR(cap)		((cap & 0x00020000) >> 17)
+#define SXGBE_HW_FEAT_TSO(cap)			((cap & 0x00040000) >> 18)
+#define SXGBE_HW_FEAT_DEBUG_MEM_IFACE(cap)	((cap & 0x00080000) >> 19)
+#define SXGBE_HW_FEAT_RSS(cap)			((cap & 0x00100000) >> 20)
+#define SXGBE_HW_FEAT_HASH_TABLE_SIZE(cap)	((cap & 0x03000000) >> 24)
+#define SXGBE_HW_FEAT_L3L4_FILTER_NUM(cap)	((cap & 0x78000000) >> 27)
+
+/* Capability Register 2 */
+#define SXGBE_HW_FEAT_RX_MTL_QUEUES(cap)	((cap & 0x0000000F))
+#define SXGBE_HW_FEAT_TX_MTL_QUEUES(cap)	((cap & 0x000003C0) >> 6)
+#define SXGBE_HW_FEAT_RX_DMA_CHANNELS(cap)	((cap & 0x0000F000) >> 12)
+#define SXGBE_HW_FEAT_TX_DMA_CHANNELS(cap)	((cap & 0x003C0000) >> 18)
+#define SXGBE_HW_FEAT_PPS_OUTPUTS(cap)		((cap & 0x07000000) >> 24)
+#define SXGBE_HW_FEAT_AUX_SNAPSHOTS(cap)	((cap & 0x70000000) >> 28)
+
+/* DMAchannel interrupt enable specific */
+/* DMA Normal interrupt */
+#define SXGBE_DMA_INT_ENA_NIE	BIT(16)	/* Normal Summary */
+#define SXGBE_DMA_INT_ENA_TIE	BIT(0)	/* Transmit Interrupt */
+#define SXGBE_DMA_INT_ENA_TUE	BIT(2)	/* Transmit Buffer Unavailable */
+#define SXGBE_DMA_INT_ENA_RIE	BIT(6)	/* Receive Interrupt */
+
+#define SXGBE_DMA_INT_NORMAL					\
+	(SXGBE_DMA_INT_ENA_NIE | SXGBE_DMA_INT_ENA_RIE |	\
+	 SXGBE_DMA_INT_ENA_TIE | SXGBE_DMA_INT_ENA_TUE)
+
+/* DMA Abnormal interrupt */
+#define SXGBE_DMA_INT_ENA_AIE	BIT(15)	/* Abnormal Summary */
+#define SXGBE_DMA_INT_ENA_TSE	BIT(1)	/* Transmit Stopped */
+#define SXGBE_DMA_INT_ENA_RUE	BIT(7)	/* Receive Buffer Unavailable */
+#define SXGBE_DMA_INT_ENA_RSE	BIT(8)	/* Receive Stopped */
+#define SXGBE_DMA_INT_ENA_FBE	BIT(12)	/* Fatal Bus Error */
+#define SXGBE_DMA_INT_ENA_CDEE	BIT(13)	/* Context Descriptor Error */
+
+#define SXGBE_DMA_INT_ABNORMAL					\
+	(SXGBE_DMA_INT_ENA_AIE | SXGBE_DMA_INT_ENA_TSE |	\
+	 SXGBE_DMA_INT_ENA_RUE | SXGBE_DMA_INT_ENA_RSE |	\
+	 SXGBE_DMA_INT_ENA_FBE | SXGBE_DMA_INT_ENA_CDEE)
+
+#define SXGBE_DMA_ENA_INT	(SXGBE_DMA_INT_NORMAL | SXGBE_DMA_INT_ABNORMAL)
+
+/* DMA channel interrupt status specific */
+#define	SXGBE_DMA_INT_STATUS_REB2	BIT(21)
+#define	SXGBE_DMA_INT_STATUS_REB1	BIT(20)
+#define	SXGBE_DMA_INT_STATUS_REB0	BIT(19)
+#define	SXGBE_DMA_INT_STATUS_TEB2	BIT(18)
+#define	SXGBE_DMA_INT_STATUS_TEB1	BIT(17)
+#define	SXGBE_DMA_INT_STATUS_TEB0	BIT(16)
+#define	SXGBE_DMA_INT_STATUS_NIS	BIT(15)
+#define SXGBE_DMA_INT_STATUS_AIS	BIT(14)
+#define SXGBE_DMA_INT_STATUS_CTXTERR	BIT(13)
+#define SXGBE_DMA_INT_STATUS_FBE	BIT(12)
+#define SXGBE_DMA_INT_STATUS_RPS	BIT(8)
+#define SXGBE_DMA_INT_STATUS_RBU	BIT(7)
+#define SXGBE_DMA_INT_STATUS_RI		BIT(6)
+#define SXGBE_DMA_INT_STATUS_TBU	BIT(2)
+#define SXGBE_DMA_INT_STATUS_TPS	BIT(1)
+#define SXGBE_DMA_INT_STATUS_TI		BIT(0)
+
+#endif /* __SXGBE_REGMAP_H__ */
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_xpcs.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_xpcs.c
new file mode 100644
index 000000000000..51c32194ba88
--- /dev/null
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_xpcs.c
@@ -0,0 +1,91 @@
+/* 10G controller driver for Samsung SoCs
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Siva Reddy Kallam <siva.kallam@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/bitops.h>
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/phy.h>
+#include "sxgbe_common.h"
+#include "sxgbe_xpcs.h"
+
+static int sxgbe_xpcs_read(struct net_device *ndev, unsigned int reg)
+{
+	u32 value;
+	struct sxgbe_priv_data *priv = netdev_priv(ndev);
+
+	value = readl(priv->ioaddr + XPCS_OFFSET + reg);
+
+	return value;
+}
+
+static int sxgbe_xpcs_write(struct net_device *ndev, int reg, int data)
+{
+	struct sxgbe_priv_data *priv = netdev_priv(ndev);
+
+	writel(data, priv->ioaddr + XPCS_OFFSET + reg);
+
+	return 0;
+}
+
+int sxgbe_xpcs_init(struct net_device *ndev)
+{
+	u32 value;
+
+	value = sxgbe_xpcs_read(ndev, SR_PCS_MMD_CONTROL1);
+	/* 10G XAUI mode */
+	sxgbe_xpcs_write(ndev, SR_PCS_CONTROL2, XPCS_TYPE_SEL_X);
+	sxgbe_xpcs_write(ndev, VR_PCS_MMD_XAUI_MODE_CONTROL, XPCS_XAUI_MODE);
+	sxgbe_xpcs_write(ndev, VR_PCS_MMD_XAUI_MODE_CONTROL, value | BIT(13));
+	sxgbe_xpcs_write(ndev, SR_PCS_MMD_CONTROL1, value | BIT(11));
+
+	do {
+		value = sxgbe_xpcs_read(ndev, VR_PCS_MMD_DIGITAL_STATUS);
+	} while ((value & XPCS_QSEQ_STATE_MPLLOFF) == XPCS_QSEQ_STATE_STABLE);
+
+	value = sxgbe_xpcs_read(ndev, SR_PCS_MMD_CONTROL1);
+	sxgbe_xpcs_write(ndev, SR_PCS_MMD_CONTROL1, value & ~BIT(11));
+
+	do {
+		value = sxgbe_xpcs_read(ndev, VR_PCS_MMD_DIGITAL_STATUS);
+	} while ((value & XPCS_QSEQ_STATE_MPLLOFF) != XPCS_QSEQ_STATE_STABLE);
+
+	return 0;
+}
+
+int sxgbe_xpcs_init_1G(struct net_device *ndev)
+{
+	int value;
+
+	/* 10GBASE-X PCS (1G) mode */
+	sxgbe_xpcs_write(ndev, SR_PCS_CONTROL2, XPCS_TYPE_SEL_X);
+	sxgbe_xpcs_write(ndev, VR_PCS_MMD_XAUI_MODE_CONTROL, XPCS_XAUI_MODE);
+	value = sxgbe_xpcs_read(ndev, SR_PCS_MMD_CONTROL1);
+	sxgbe_xpcs_write(ndev, SR_PCS_MMD_CONTROL1, value & ~BIT(13));
+
+	value = sxgbe_xpcs_read(ndev, SR_MII_MMD_CONTROL);
+	sxgbe_xpcs_write(ndev, SR_MII_MMD_CONTROL, value | BIT(6));
+	sxgbe_xpcs_write(ndev, SR_MII_MMD_CONTROL, value & ~BIT(13));
+	value = sxgbe_xpcs_read(ndev, SR_PCS_MMD_CONTROL1);
+	sxgbe_xpcs_write(ndev, SR_PCS_MMD_CONTROL1, value | BIT(11));
+
+	do {
+		value = sxgbe_xpcs_read(ndev, VR_PCS_MMD_DIGITAL_STATUS);
+	} while ((value & XPCS_QSEQ_STATE_MPLLOFF) != XPCS_QSEQ_STATE_STABLE);
+
+	value = sxgbe_xpcs_read(ndev, SR_PCS_MMD_CONTROL1);
+	sxgbe_xpcs_write(ndev, SR_PCS_MMD_CONTROL1, value & ~BIT(11));
+
+	/* Auto Negotiation cluase 37 enable */
+	value = sxgbe_xpcs_read(ndev, SR_MII_MMD_CONTROL);
+	sxgbe_xpcs_write(ndev, SR_MII_MMD_CONTROL, value | BIT(12));
+
+	return 0;
+}
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_xpcs.h b/drivers/net/ethernet/samsung/sxgbe/sxgbe_xpcs.h
new file mode 100644
index 000000000000..6b26a50724d3
--- /dev/null
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_xpcs.h
@@ -0,0 +1,38 @@
+/* 10G controller driver for Samsung SoCs
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Byungho An <bh74.an@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __SXGBE_XPCS_H__
+#define __SXGBE_XPCS_H__
+
+/* XPCS Registers */
+#define XPCS_OFFSET			0x1A060000
+#define SR_PCS_MMD_CONTROL1		0x030000
+#define SR_PCS_CONTROL2			0x030007
+#define VR_PCS_MMD_XAUI_MODE_CONTROL	0x038004
+#define VR_PCS_MMD_DIGITAL_STATUS	0x038010
+#define SR_MII_MMD_CONTROL		0x1F0000
+#define SR_MII_MMD_AN_ADV		0x1F0004
+#define SR_MII_MMD_AN_LINK_PARTNER_BA	0x1F0005
+#define VR_MII_MMD_AN_CONTROL		0x1F8001
+#define VR_MII_MMD_AN_INT_STATUS	0x1F8002
+
+#define XPCS_QSEQ_STATE_STABLE		0x10
+#define XPCS_QSEQ_STATE_MPLLOFF		0x1c
+#define XPCS_TYPE_SEL_R			0x00
+#define XPCS_TYPE_SEL_X			0x01
+#define XPCS_TYPE_SEL_W			0x02
+#define XPCS_XAUI_MODE			0x00
+#define XPCS_RXAUI_MODE			0x01
+
+int sxgbe_xpcs_init(struct net_device *ndev);
+int sxgbe_xpcs_init_1G(struct net_device *ndev);
+
+#endif /* __SXGBE_XPCS_H__ */
-- 
cgit v1.2.2


From acc18c147b2281ff85f93862eb8c768df1bfb7df Mon Sep 17 00:00:00 2001
From: Girish K S <ks.giri@samsung.com>
Date: Tue, 25 Mar 2014 12:10:57 -0700
Subject: net: sxgbe: add EEE(Energy Efficient Ethernet) for Samsung sxgbe

Added support for the EEE(Energy Efficient Ethernet) in 10G ethernet driver.

Signed-off-by: Girish K S <ks.giri@samsung.com>
Neatening-by: Joe Perches <joe@perches.com>
Signed-off-by: Byungho An <bh74.an@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/samsung/sxgbe/sxgbe_common.h  |  53 +++++++
 drivers/net/ethernet/samsung/sxgbe/sxgbe_core.c    |  86 ++++++++++-
 drivers/net/ethernet/samsung/sxgbe/sxgbe_ethtool.c |  47 ++++++
 drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c    | 165 ++++++++++++++++++++-
 .../net/ethernet/samsung/sxgbe/sxgbe_platform.c    |   6 +
 drivers/net/ethernet/samsung/sxgbe/sxgbe_reg.h     |   5 +
 6 files changed, 360 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_common.h b/drivers/net/ethernet/samsung/sxgbe/sxgbe_common.h
index c7803f199967..fd367cb6bcad 100644
--- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_common.h
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_common.h
@@ -118,6 +118,33 @@ struct sxgbe_mtl_ops;
 #define RX_PTP_SIGNAL		0x0A
 #define RX_PTP_RESV_MSG		0x0F
 
+/* EEE-LPI mode  flags*/
+#define TX_ENTRY_LPI_MODE	0x10
+#define TX_EXIT_LPI_MODE	0x20
+#define RX_ENTRY_LPI_MODE	0x40
+#define RX_EXIT_LPI_MODE	0x80
+
+/* EEE-LPI Interrupt status flag */
+#define LPI_INT_STATUS		BIT(5)
+
+/* EEE-LPI Default timer values */
+#define LPI_LINK_STATUS_TIMER	0x3E8
+#define LPI_MAC_WAIT_TIMER	0x00
+
+/* EEE-LPI Control and status definitions */
+#define LPI_CTRL_STATUS_TXA	BIT(19)
+#define LPI_CTRL_STATUS_PLSDIS	BIT(18)
+#define LPI_CTRL_STATUS_PLS	BIT(17)
+#define LPI_CTRL_STATUS_LPIEN	BIT(16)
+#define LPI_CTRL_STATUS_TXRSTP	BIT(11)
+#define LPI_CTRL_STATUS_RXRSTP	BIT(10)
+#define LPI_CTRL_STATUS_RLPIST	BIT(9)
+#define LPI_CTRL_STATUS_TLPIST	BIT(8)
+#define LPI_CTRL_STATUS_RLPIEX	BIT(3)
+#define LPI_CTRL_STATUS_RLPIEN	BIT(2)
+#define LPI_CTRL_STATUS_TLPIEX	BIT(1)
+#define LPI_CTRL_STATUS_TLPIEN	BIT(0)
+
 enum dma_irq_status {
 	tx_hard_error	= BIT(0),
 	tx_bump_tc	= BIT(1),
@@ -202,6 +229,13 @@ struct sxgbe_extra_stats {
 	unsigned long rx_buffer_access_err;
 	unsigned long rx_data_transfer_err;
 
+	/* EEE-LPI stats */
+	unsigned long tx_lpi_entry_n;
+	unsigned long tx_lpi_exit_n;
+	unsigned long rx_lpi_entry_n;
+	unsigned long rx_lpi_exit_n;
+	unsigned long eee_wakeup_error_n;
+
 	/* RX specific */
 	/* L2 error */
 	unsigned long rx_code_gmii_err;
@@ -299,6 +333,13 @@ struct sxgbe_core_ops {
 				       unsigned char feature_index);
 	/* adjust SXGBE speed */
 	void (*set_speed)(void __iomem *ioaddr, unsigned char speed);
+
+	/* EEE-LPI specific operations */
+	void (*set_eee_mode)(void __iomem *ioaddr);
+	void (*reset_eee_mode)(void __iomem *ioaddr);
+	void (*set_eee_timer)(void __iomem *ioaddr, const int ls,
+			      const int tw);
+	void (*set_eee_pls)(void __iomem *ioaddr, const int link);
 };
 
 const struct sxgbe_core_ops *sxgbe_get_core_ops(void);
@@ -354,6 +395,8 @@ struct sxgbe_hw_features {
 	/* IEEE 1588-2008 */
 	unsigned int atime_stamp;
 
+	unsigned int eee;
+
 	unsigned int tx_csum_offload;
 	unsigned int rx_csum_offload;
 	unsigned int multi_macaddr;
@@ -437,6 +480,13 @@ struct sxgbe_priv_data {
 	/* tc control */
 	int tx_tc;
 	int rx_tc;
+	/* EEE-LPI specific members */
+	struct timer_list eee_ctrl_timer;
+	bool tx_path_in_lpi_mode;
+	int lpi_irq;
+	int eee_enabled;
+	int eee_active;
+	int tx_lpi_timer;
 };
 
 /* Function prototypes */
@@ -459,4 +509,7 @@ int sxgbe_restore(struct net_device *ndev);
 
 const struct sxgbe_mtl_ops *sxgbe_get_mtl_ops(void);
 
+void sxgbe_disable_eee_mode(struct sxgbe_priv_data * const priv);
+bool sxgbe_eee_init(struct sxgbe_priv_data * const priv);
+
 #endif /* __SXGBE_COMMON_H__ */
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_core.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_core.c
index 4ad31bbc42c9..01647901f55f 100644
--- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_core.c
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_core.c
@@ -48,11 +48,38 @@ static void sxgbe_core_dump_regs(void __iomem *ioaddr)
 {
 }
 
+static int sxgbe_get_lpi_status(void __iomem *ioaddr, const u32 irq_status)
+{
+	int status = 0;
+	int lpi_status;
+
+	/* Reading this register shall clear all the LPI status bits */
+	lpi_status = readl(ioaddr + SXGBE_CORE_LPI_CTRL_STATUS);
+
+	if (lpi_status & LPI_CTRL_STATUS_TLPIEN)
+		status |= TX_ENTRY_LPI_MODE;
+	if (lpi_status & LPI_CTRL_STATUS_TLPIEX)
+		status |= TX_EXIT_LPI_MODE;
+	if (lpi_status & LPI_CTRL_STATUS_RLPIEN)
+		status |= RX_ENTRY_LPI_MODE;
+	if (lpi_status & LPI_CTRL_STATUS_RLPIEX)
+		status |= RX_EXIT_LPI_MODE;
+
+	return status;
+}
+
 /* Handle extra events on specific interrupts hw dependent */
 static int sxgbe_core_host_irq_status(void __iomem *ioaddr,
 				      struct sxgbe_extra_stats *x)
 {
-	return 0;
+	int irq_status, status = 0;
+
+	irq_status = readl(ioaddr + SXGBE_CORE_INT_STATUS_REG);
+
+	if (unlikely(irq_status & LPI_INT_STATUS))
+		status |= sxgbe_get_lpi_status(ioaddr, irq_status);
+
+	return status;
 }
 
 /* Set power management mode (e.g. magic frame) */
@@ -138,6 +165,59 @@ static void sxgbe_core_set_speed(void __iomem *ioaddr, unsigned char speed)
 	writel(tx_cfg, ioaddr + SXGBE_CORE_TX_CONFIG_REG);
 }
 
+static void  sxgbe_set_eee_mode(void __iomem *ioaddr)
+{
+	u32 ctrl;
+
+	/* Enable the LPI mode for transmit path with Tx automate bit set.
+	 * When Tx Automate bit is set, MAC internally handles the entry
+	 * to LPI mode after all outstanding and pending packets are
+	 * transmitted.
+	 */
+	ctrl = readl(ioaddr + SXGBE_CORE_LPI_CTRL_STATUS);
+	ctrl |= LPI_CTRL_STATUS_LPIEN | LPI_CTRL_STATUS_TXA;
+	writel(ctrl, ioaddr + SXGBE_CORE_LPI_CTRL_STATUS);
+}
+
+static void  sxgbe_reset_eee_mode(void __iomem *ioaddr)
+{
+	u32 ctrl;
+
+	ctrl = readl(ioaddr + SXGBE_CORE_LPI_CTRL_STATUS);
+	ctrl &= ~(LPI_CTRL_STATUS_LPIEN | LPI_CTRL_STATUS_TXA);
+	writel(ctrl, ioaddr + SXGBE_CORE_LPI_CTRL_STATUS);
+}
+
+static void  sxgbe_set_eee_pls(void __iomem *ioaddr, const int link)
+{
+	u32 ctrl;
+
+	ctrl = readl(ioaddr + SXGBE_CORE_LPI_CTRL_STATUS);
+
+	/* If the PHY link status is UP then set PLS */
+	if (link)
+		ctrl |= LPI_CTRL_STATUS_PLS;
+	else
+		ctrl &= ~LPI_CTRL_STATUS_PLS;
+
+	writel(ctrl, ioaddr + SXGBE_CORE_LPI_CTRL_STATUS);
+}
+
+static void  sxgbe_set_eee_timer(void __iomem *ioaddr,
+				 const int ls, const int tw)
+{
+	int value = ((tw & 0xffff)) | ((ls & 0x7ff) << 16);
+
+	/* Program the timers in the LPI timer control register:
+	 * LS: minimum time (ms) for which the link
+	 *  status from PHY should be ok before transmitting
+	 *  the LPI pattern.
+	 * TW: minimum time (us) for which the core waits
+	 *  after it has stopped transmitting the LPI pattern.
+	 */
+	writel(value, ioaddr + SXGBE_CORE_LPI_TIMER_CTRL);
+}
+
 const struct sxgbe_core_ops core_ops = {
 	.core_init		= sxgbe_core_init,
 	.dump_regs		= sxgbe_core_dump_regs,
@@ -150,6 +230,10 @@ const struct sxgbe_core_ops core_ops = {
 	.get_controller_version	= sxgbe_get_controller_version,
 	.get_hw_feature		= sxgbe_get_hw_feature,
 	.set_speed		= sxgbe_core_set_speed,
+	.set_eee_mode		= sxgbe_set_eee_mode,
+	.reset_eee_mode		= sxgbe_reset_eee_mode,
+	.set_eee_timer		= sxgbe_set_eee_timer,
+	.set_eee_pls		= sxgbe_set_eee_pls,
 };
 
 const struct sxgbe_core_ops *sxgbe_get_core_ops(void)
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_ethtool.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_ethtool.c
index 1dce2b2e045b..ca95f1daefd8 100644
--- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_ethtool.c
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_ethtool.c
@@ -32,10 +32,57 @@ struct sxgbe_stats {
 }
 
 static const struct sxgbe_stats sxgbe_gstrings_stats[] = {
+	SXGBE_STAT(tx_lpi_entry_n),
+	SXGBE_STAT(tx_lpi_exit_n),
+	SXGBE_STAT(rx_lpi_entry_n),
+	SXGBE_STAT(rx_lpi_exit_n),
+	SXGBE_STAT(eee_wakeup_error_n),
 };
 #define SXGBE_STATS_LEN ARRAY_SIZE(sxgbe_gstrings_stats)
 
+static int sxgbe_get_eee(struct net_device *dev,
+			 struct ethtool_eee *edata)
+{
+	struct sxgbe_priv_data *priv = netdev_priv(dev);
+
+	if (!priv->hw_cap.eee)
+		return -EOPNOTSUPP;
+
+	edata->eee_enabled = priv->eee_enabled;
+	edata->eee_active = priv->eee_active;
+	edata->tx_lpi_timer = priv->tx_lpi_timer;
+
+	return phy_ethtool_get_eee(priv->phydev, edata);
+}
+
+static int sxgbe_set_eee(struct net_device *dev,
+			 struct ethtool_eee *edata)
+{
+	struct sxgbe_priv_data *priv = netdev_priv(dev);
+
+	priv->eee_enabled = edata->eee_enabled;
+
+	if (!priv->eee_enabled) {
+		sxgbe_disable_eee_mode(priv);
+	} else {
+		/* We are asking for enabling the EEE but it is safe
+		 * to verify all by invoking the eee_init function.
+		 * In case of failure it will return an error.
+		 */
+		priv->eee_enabled = sxgbe_eee_init(priv);
+		if (!priv->eee_enabled)
+			return -EOPNOTSUPP;
+
+		/* Do not change tx_lpi_timer in case of failure */
+		priv->tx_lpi_timer = edata->tx_lpi_timer;
+	}
+
+	return phy_ethtool_set_eee(priv->phydev, edata);
+}
+
 static const struct ethtool_ops sxgbe_ethtool_ops = {
+	.get_eee = sxgbe_get_eee,
+	.set_eee = sxgbe_set_eee,
 };
 
 void sxgbe_set_ethtool_ops(struct net_device *netdev)
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
index 75ba57cfe7c0..fbee3da4c592 100644
--- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
@@ -55,6 +55,9 @@
 #define SXGBE_DEFAULT_LPI_TIMER	1000
 
 static int debug = -1;
+static int eee_timer = SXGBE_DEFAULT_LPI_TIMER;
+
+module_param(eee_timer, int, S_IRUGO | S_IWUSR);
 
 module_param(debug, int, S_IRUGO | S_IWUSR);
 static const u32 default_msg_level = (NETIF_MSG_DRV | NETIF_MSG_PROBE |
@@ -67,6 +70,97 @@ static irqreturn_t sxgbe_rx_interrupt(int irq, void *dev_id);
 
 #define SXGBE_COAL_TIMER(x) (jiffies + usecs_to_jiffies(x))
 
+#define SXGBE_LPI_TIMER(x) (jiffies + msecs_to_jiffies(x))
+
+/**
+ * sxgbe_verify_args - verify the driver parameters.
+ * Description: it verifies if some wrong parameter is passed to the driver.
+ * Note that wrong parameters are replaced with the default values.
+ */
+static void sxgbe_verify_args(void)
+{
+	if (unlikely(eee_timer < 0))
+		eee_timer = SXGBE_DEFAULT_LPI_TIMER;
+}
+
+static void sxgbe_enable_eee_mode(const struct sxgbe_priv_data *priv)
+{
+	/* Check and enter in LPI mode */
+	if (!priv->tx_path_in_lpi_mode)
+		priv->hw->mac->set_eee_mode(priv->ioaddr);
+}
+
+void sxgbe_disable_eee_mode(struct sxgbe_priv_data * const priv)
+{
+	/* Exit and disable EEE in case of we are are in LPI state. */
+	priv->hw->mac->reset_eee_mode(priv->ioaddr);
+	del_timer_sync(&priv->eee_ctrl_timer);
+	priv->tx_path_in_lpi_mode = false;
+}
+
+/**
+ * sxgbe_eee_ctrl_timer
+ * @arg : data hook
+ * Description:
+ *  If there is no data transfer and if we are not in LPI state,
+ *  then MAC Transmitter can be moved to LPI state.
+ */
+static void sxgbe_eee_ctrl_timer(unsigned long arg)
+{
+	struct sxgbe_priv_data *priv = (struct sxgbe_priv_data *)arg;
+
+	sxgbe_enable_eee_mode(priv);
+	mod_timer(&priv->eee_ctrl_timer, SXGBE_LPI_TIMER(eee_timer));
+}
+
+/**
+ * sxgbe_eee_init
+ * @priv: private device pointer
+ * Description:
+ *  If the EEE support has been enabled while configuring the driver,
+ *  if the GMAC actually supports the EEE (from the HW cap reg) and the
+ *  phy can also manage EEE, so enable the LPI state and start the timer
+ *  to verify if the tx path can enter in LPI state.
+ */
+bool sxgbe_eee_init(struct sxgbe_priv_data * const priv)
+{
+	bool ret = false;
+
+	/* MAC core supports the EEE feature. */
+	if (priv->hw_cap.eee) {
+		/* Check if the PHY supports EEE */
+		if (phy_init_eee(priv->phydev, 1))
+			return false;
+
+		priv->eee_active = 1;
+		init_timer(&priv->eee_ctrl_timer);
+		priv->eee_ctrl_timer.function = sxgbe_eee_ctrl_timer;
+		priv->eee_ctrl_timer.data = (unsigned long)priv;
+		priv->eee_ctrl_timer.expires = SXGBE_LPI_TIMER(eee_timer);
+		add_timer(&priv->eee_ctrl_timer);
+
+		priv->hw->mac->set_eee_timer(priv->ioaddr,
+					     SXGBE_DEFAULT_LPI_TIMER,
+					     priv->tx_lpi_timer);
+
+		pr_info("Energy-Efficient Ethernet initialized\n");
+
+		ret = true;
+	}
+
+	return ret;
+}
+
+static void sxgbe_eee_adjust(const struct sxgbe_priv_data *priv)
+{
+	/* When the EEE has been already initialised we have to
+	 * modify the PLS bit in the LPI ctrl & status reg according
+	 * to the PHY link status. For this reason.
+	 */
+	if (priv->eee_enabled)
+		priv->hw->mac->set_eee_pls(priv->ioaddr, priv->phydev->link);
+}
+
 /**
  * sxgbe_clk_csr_set - dynamically set the MDC clock
  * @priv: driver private structure
@@ -156,6 +250,9 @@ static void sxgbe_adjust_link(struct net_device *dev)
 
 	if (new_state & netif_msg_link(priv))
 		phy_print_status(phydev);
+
+	/* Alter the MAC settings for EEE */
+	sxgbe_eee_adjust(priv);
 }
 
 /**
@@ -676,7 +773,7 @@ static void sxgbe_tx_queue_clean(struct sxgbe_tx_queue *tqueue)
  * @priv: driver private structure
  * Description: it reclaims resources after transmission completes.
  */
-static void sxgbe_tx_all_clean(struct sxgbe_priv_data *priv)
+static void sxgbe_tx_all_clean(struct sxgbe_priv_data * const priv)
 {
 	u8 queue_num;
 
@@ -685,6 +782,11 @@ static void sxgbe_tx_all_clean(struct sxgbe_priv_data *priv)
 
 		sxgbe_tx_queue_clean(tqueue);
 	}
+
+	if ((priv->eee_enabled) && (!priv->tx_path_in_lpi_mode)) {
+		sxgbe_enable_eee_mode(priv);
+		mod_timer(&priv->eee_ctrl_timer, SXGBE_LPI_TIMER(eee_timer));
+	}
 }
 
 /**
@@ -766,6 +868,7 @@ static int sxgbe_get_hw_features(struct sxgbe_priv_data * const priv)
 		features->multi_macaddr = SXGBE_HW_FEAT_MACADDR_COUNT(rval);
 		features->tstamp_srcselect = SXGBE_HW_FEAT_TSTMAP_SRC(rval);
 		features->sa_vlan_insert = SXGBE_HW_FEAT_SRCADDR_VLAN(rval);
+		features->eee = SXGBE_HW_FEAT_EEE(rval);
 	}
 
 	/* Read First Capability Register CAP[1] */
@@ -983,6 +1086,20 @@ static int sxgbe_open(struct net_device *dev)
 		goto init_error;
 	}
 
+	/* If the LPI irq is different from the mac irq
+	 * register a dedicated handler
+	 */
+	if (priv->lpi_irq != dev->irq) {
+		ret = devm_request_irq(priv->device, priv->lpi_irq,
+				       sxgbe_common_interrupt,
+				       IRQF_SHARED, dev->name, dev);
+		if (unlikely(ret < 0)) {
+			netdev_err(dev, "%s: ERROR: allocating the LPI IRQ %d (%d)\n",
+				   __func__, priv->lpi_irq, ret);
+			goto init_error;
+		}
+	}
+
 	/* Request TX DMA irq lines */
 	SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) {
 		ret = devm_request_irq(priv->device,
@@ -1038,6 +1155,9 @@ static int sxgbe_open(struct net_device *dev)
 		priv->hw->dma->rx_watchdog(priv->ioaddr, SXGBE_MAX_DMA_RIWT);
 	}
 
+	priv->tx_lpi_timer = SXGBE_DEFAULT_LPI_TIMER;
+	priv->eee_enabled = sxgbe_eee_init(priv);
+
 	napi_enable(&priv->napi);
 	netif_start_queue(dev);
 
@@ -1063,6 +1183,9 @@ static int sxgbe_release(struct net_device *dev)
 {
 	struct sxgbe_priv_data *priv = netdev_priv(dev);
 
+	if (priv->eee_enabled)
+		del_timer_sync(&priv->eee_ctrl_timer);
+
 	/* Stop and disconnect the PHY */
 	if (priv->phydev) {
 		phy_stop(priv->phydev);
@@ -1123,6 +1246,9 @@ static netdev_tx_t sxgbe_xmit(struct sk_buff *skb, struct net_device *dev)
 	/* get the spinlock */
 	spin_lock(&tqueue->tx_lock);
 
+	if (priv->tx_path_in_lpi_mode)
+		sxgbe_disable_eee_mode(priv);
+
 	if (unlikely(sxgbe_tx_avail(tqueue, tx_rsize) < nr_frags + 1)) {
 		if (!netif_tx_queue_stopped(dev_txq)) {
 			netif_tx_stop_queue(dev_txq);
@@ -1380,6 +1506,25 @@ static void sxgbe_tx_timeout(struct net_device *dev)
  */
 static irqreturn_t sxgbe_common_interrupt(int irq, void *dev_id)
 {
+	struct net_device *netdev = (struct net_device *)dev_id;
+	struct sxgbe_priv_data *priv = netdev_priv(netdev);
+	int status;
+
+	status = priv->hw->mac->host_irq_status(priv->ioaddr, &priv->xstats);
+	/* For LPI we need to save the tx status */
+	if (status & TX_ENTRY_LPI_MODE) {
+		priv->xstats.tx_lpi_entry_n++;
+		priv->tx_path_in_lpi_mode = true;
+	}
+	if (status & TX_EXIT_LPI_MODE) {
+		priv->xstats.tx_lpi_exit_n++;
+		priv->tx_path_in_lpi_mode = false;
+	}
+	if (status & RX_ENTRY_LPI_MODE)
+		priv->xstats.rx_lpi_entry_n++;
+	if (status & RX_EXIT_LPI_MODE)
+		priv->xstats.rx_lpi_exit_n++;
+
 	return IRQ_HANDLED;
 }
 
@@ -1876,6 +2021,9 @@ struct sxgbe_priv_data *sxgbe_drv_probe(struct device *device,
 	priv->plat = plat_dat;
 	priv->ioaddr = addr;
 
+	/* Verify driver arguments */
+	sxgbe_verify_args();
+
 	/* Init MAC and get the capabilities */
 	sxgbe_hw_init(priv);
 
@@ -2032,7 +2180,21 @@ module_exit(sxgbe_exit);
 #ifndef MODULE
 static int __init sxgbe_cmdline_opt(char *str)
 {
+	char *opt;
+
+	if (!str || !*str)
+		return -EINVAL;
+	while ((opt = strsep(&str, ",")) != NULL) {
+		if (!strncmp(opt, "eee_timer:", 6)) {
+			if (kstrtoint(opt + 10, 0, &eee_timer))
+				goto err;
+		}
+	}
 	return 0;
+
+err:
+	pr_err("%s: ERROR broken module parameter conversion\n", __func__);
+	return -EINVAL;
 }
 
 __setup("sxgbeeth=", sxgbe_cmdline_opt);
@@ -2043,6 +2205,7 @@ __setup("sxgbeeth=", sxgbe_cmdline_opt);
 MODULE_DESCRIPTION("SAMSUNG 10G/2.5G/1G Ethernet PLATFORM driver");
 
 MODULE_PARM_DESC(debug, "Message Level (-1: default, 0: no output, 16: all)");
+MODULE_PARM_DESC(eee_timer, "EEE-LPI Default LS timer value");
 
 MODULE_AUTHOR("Siva Reddy Kallam <siva.kallam@samsung.com>");
 MODULE_AUTHOR("ByungHo An <bh74.an@samsung.com>");
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c
index f5a9de710052..94c2cd73d4a9 100644
--- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c
@@ -145,6 +145,12 @@ static int sxgbe_platform_probe(struct platform_device *pdev)
 		}
 	}
 
+	priv->lpi_irq = irq_of_parse_and_map(node, chan);
+	if (priv->lpi_irq <= 0) {
+		dev_err(dev, "sxgbe lpi irq parsing failed\n");
+		goto err_rx_irq_unmap;
+	}
+
 	platform_set_drvdata(pdev, priv->dev);
 
 	pr_debug("platform driver registration completed\n");
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_reg.h b/drivers/net/ethernet/samsung/sxgbe/sxgbe_reg.h
index d1cd9ac1b062..85a7b3104a1a 100644
--- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_reg.h
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_reg.h
@@ -25,6 +25,11 @@
 #define SXGBE_CORE_HASH_TABLE_REG5	0x0024
 #define SXGBE_CORE_HASH_TABLE_REG6	0x0028
 #define SXGBE_CORE_HASH_TABLE_REG7	0x002C
+
+/* EEE-LPI Registers */
+#define SXGBE_CORE_LPI_CTRL_STATUS	0x00D0
+#define SXGBE_CORE_LPI_TIMER_CTRL	0x00D4
+
 /* VLAN Specific Registers */
 #define SXGBE_CORE_VLAN_TAG_REG		0x0050
 #define SXGBE_CORE_VLAN_HASHTAB_REG	0x0058
-- 
cgit v1.2.2


From 1051125d8d57b6ff074d450c10ccbe0e39856456 Mon Sep 17 00:00:00 2001
From: Vipul Pandya <vipul.pandya@samsung.com>
Date: Tue, 25 Mar 2014 12:10:57 -0700
Subject: net: sxgbe: add TSO support for Samsung sxgbe

Enable TSO during initialization for each DMA channels

Signed-off-by: Vipul Pandya <vipul.pandya@samsung.com>
Neatening-by: Joe Perches <joe@perches.com>
Signed-off-by: Byungho An <bh74.an@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/samsung/sxgbe/sxgbe_common.h |  1 +
 drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.c   |  2 +-
 drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.h   |  4 +-
 drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.c    | 10 +++
 drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.h    |  2 +
 drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c   | 84 ++++++++++++++++++++---
 6 files changed, 92 insertions(+), 11 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_common.h b/drivers/net/ethernet/samsung/sxgbe/sxgbe_common.h
index fd367cb6bcad..7293c4c14be8 100644
--- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_common.h
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_common.h
@@ -371,6 +371,7 @@ struct sxgbe_tx_queue {
 	u32 tx_coal_frames;
 	u32 tx_coal_timer;
 	int hwts_tx_en;
+	u16 prev_mss;
 	u8 queue_no;
 };
 
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.c
index 7cb5520475b7..e896dbbd2e15 100644
--- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.c
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.c
@@ -133,7 +133,7 @@ static int sxgbe_tx_ctxt_desc_get_owner(struct sxgbe_tx_ctxt_desc *p)
 }
 
 /* Set TX mss in TX context Descriptor */
-static void sxgbe_tx_ctxt_desc_set_mss(struct sxgbe_tx_ctxt_desc *p, int mss)
+static void sxgbe_tx_ctxt_desc_set_mss(struct sxgbe_tx_ctxt_desc *p, u16 mss)
 {
 	p->maxseg_size = mss;
 }
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.h b/drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.h
index 2caef1ae1ac5..6d44b9faf64e 100644
--- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.h
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.h
@@ -168,7 +168,7 @@ struct sxgbe_desc_ops {
 
 	/* Invoked by the xmit function to prepare the tx descriptor */
 	void (*tx_desc_enable_tse)(struct sxgbe_tx_norm_desc *p, u8 is_tse,
-				   u32 total_hdr_len, u32 payload_len,
+				   u32 total_hdr_len, u32 tcp_hdr_len,
 				   u32 tcp_payload_len);
 
 	/* Assign buffer lengths for descriptor */
@@ -217,7 +217,7 @@ struct sxgbe_desc_ops {
 	int (*get_tx_ctxt_owner)(struct sxgbe_tx_ctxt_desc *p);
 
 	/* Set TX mss */
-	void (*tx_ctxt_desc_set_mss)(struct sxgbe_tx_ctxt_desc *p, int mss);
+	void (*tx_ctxt_desc_set_mss)(struct sxgbe_tx_ctxt_desc *p, u16 mss);
 
 	/* Set TX mss */
 	int (*tx_ctxt_desc_get_mss)(struct sxgbe_tx_ctxt_desc *p);
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.c
index 59d2d3976277..28f89c41d0cd 100644
--- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.c
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.c
@@ -349,6 +349,15 @@ static void sxgbe_dma_rx_watchdog(void __iomem *ioaddr, u32 riwt)
 	}
 }
 
+static void sxgbe_enable_tso(void __iomem *ioaddr, u8 chan_num)
+{
+	u32 ctrl;
+
+	ctrl = readl(ioaddr + SXGBE_DMA_CHA_TXCTL_REG(chan_num));
+	ctrl |= SXGBE_DMA_CHA_TXCTL_TSE_ENABLE;
+	writel(ctrl, ioaddr + SXGBE_DMA_CHA_TXCTL_REG(chan_num));
+}
+
 static const struct sxgbe_dma_ops sxgbe_dma_ops = {
 	.init				= sxgbe_dma_init,
 	.cha_init			= sxgbe_dma_channel_init,
@@ -364,6 +373,7 @@ static const struct sxgbe_dma_ops sxgbe_dma_ops = {
 	.tx_dma_int_status		= sxgbe_tx_dma_int_status,
 	.rx_dma_int_status		= sxgbe_rx_dma_int_status,
 	.rx_watchdog			= sxgbe_dma_rx_watchdog,
+	.enable_tso			= sxgbe_enable_tso,
 };
 
 const struct sxgbe_dma_ops *sxgbe_get_dma_ops(void)
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.h b/drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.h
index bbf167efb60c..1607b54c9bb0 100644
--- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.h
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.h
@@ -41,6 +41,8 @@ struct sxgbe_dma_ops {
 				 struct sxgbe_extra_stats *x);
 	/* Program the HW RX Watchdog */
 	void (*rx_watchdog)(void __iomem *ioaddr, u32 riwt);
+	/* Enable TSO for each DMA channel */
+	void (*enable_tso)(void __iomem *ioaddr, u8 chan_num);
 };
 
 const struct sxgbe_dma_ops *sxgbe_get_dma_ops(void);
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
index fbee3da4c592..dc0249bfa03b 100644
--- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
@@ -1219,6 +1219,28 @@ static int sxgbe_release(struct net_device *dev)
 	return 0;
 }
 
+/* Prepare first Tx descriptor for doing TSO operation */
+void sxgbe_tso_prepare(struct sxgbe_priv_data *priv,
+		       struct sxgbe_tx_norm_desc *first_desc,
+		       struct sk_buff *skb)
+{
+	unsigned int total_hdr_len, tcp_hdr_len;
+
+	/* Write first Tx descriptor with appropriate value */
+	tcp_hdr_len = tcp_hdrlen(skb);
+	total_hdr_len = skb_transport_offset(skb) + tcp_hdr_len;
+
+	first_desc->tdes01 = dma_map_single(priv->device, skb->data,
+					    total_hdr_len, DMA_TO_DEVICE);
+	if (dma_mapping_error(priv->device, first_desc->tdes01))
+		pr_err("%s: TX dma mapping failed!!\n", __func__);
+
+	first_desc->tdes23.tx_rd_des23.first_desc = 1;
+	priv->hw->desc->tx_desc_enable_tse(first_desc, 1, total_hdr_len,
+					   tcp_hdr_len,
+					   skb->len - total_hdr_len);
+}
+
 /**
  *  sxgbe_xmit: Tx entry point of the driver
  *  @skb : the socket buffer
@@ -1236,13 +1258,24 @@ static netdev_tx_t sxgbe_xmit(struct sk_buff *skb, struct net_device *dev)
 	unsigned int tx_rsize = priv->dma_tx_size;
 	struct sxgbe_tx_queue *tqueue = priv->txq[txq_index];
 	struct sxgbe_tx_norm_desc *tx_desc, *first_desc;
+	struct sxgbe_tx_ctxt_desc *ctxt_desc = NULL;
 	int nr_frags = skb_shinfo(skb)->nr_frags;
 	int no_pagedlen = skb_headlen(skb);
 	int is_jumbo = 0;
+	u16 cur_mss = skb_shinfo(skb)->gso_size;
+	u32 ctxt_desc_req = 0;
 
 	/* get the TX queue handle */
 	dev_txq = netdev_get_tx_queue(dev, txq_index);
 
+	if (unlikely(skb_is_gso(skb) && tqueue->prev_mss != cur_mss))
+		ctxt_desc_req = 1;
+
+	if (unlikely(vlan_tx_tag_present(skb) ||
+		     ((skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) &&
+		      tqueue->hwts_tx_en)))
+		ctxt_desc_req = 1;
+
 	/* get the spinlock */
 	spin_lock(&tqueue->tx_lock);
 
@@ -1264,18 +1297,43 @@ static netdev_tx_t sxgbe_xmit(struct sk_buff *skb, struct net_device *dev)
 	tx_desc = tqueue->dma_tx + entry;
 
 	first_desc = tx_desc;
+	if (ctxt_desc_req)
+		ctxt_desc = (struct sxgbe_tx_ctxt_desc *)first_desc;
 
 	/* save the skb address */
 	tqueue->tx_skbuff[entry] = skb;
 
 	if (!is_jumbo) {
-		tx_desc->tdes01 = dma_map_single(priv->device, skb->data,
-						   no_pagedlen, DMA_TO_DEVICE);
-		if (dma_mapping_error(priv->device, tx_desc->tdes01))
-			pr_err("%s: TX dma mapping failed!!\n", __func__);
-
-		priv->hw->desc->prepare_tx_desc(tx_desc, 1, no_pagedlen,
-						no_pagedlen, 0);
+		if (likely(skb_is_gso(skb))) {
+			/* TSO support */
+			if (unlikely(tqueue->prev_mss != cur_mss)) {
+				priv->hw->desc->tx_ctxt_desc_set_mss(
+						ctxt_desc, cur_mss);
+				priv->hw->desc->tx_ctxt_desc_set_tcmssv(
+						ctxt_desc);
+				priv->hw->desc->tx_ctxt_desc_reset_ostc(
+						ctxt_desc);
+				priv->hw->desc->tx_ctxt_desc_set_ctxt(
+						ctxt_desc);
+				priv->hw->desc->tx_ctxt_desc_set_owner(
+						ctxt_desc);
+
+				entry = (++tqueue->cur_tx) % tx_rsize;
+				first_desc = tqueue->dma_tx + entry;
+
+				tqueue->prev_mss = cur_mss;
+			}
+			sxgbe_tso_prepare(priv, first_desc, skb);
+		} else {
+			tx_desc->tdes01 = dma_map_single(priv->device,
+							 skb->data, no_pagedlen, DMA_TO_DEVICE);
+			if (dma_mapping_error(priv->device, tx_desc->tdes01))
+				netdev_err(dev, "%s: TX dma mapping failed!!\n",
+					   __func__);
+
+			priv->hw->desc->prepare_tx_desc(tx_desc, 1, no_pagedlen,
+							no_pagedlen, 0);
+		}
 	}
 
 	for (frag_num = 0; frag_num < nr_frags; frag_num++) {
@@ -2005,6 +2063,7 @@ struct sxgbe_priv_data *sxgbe_drv_probe(struct device *device,
 	struct sxgbe_priv_data *priv;
 	struct net_device *ndev;
 	int ret;
+	u8 queue_num;
 
 	ndev = alloc_etherdev_mqs(sizeof(struct sxgbe_priv_data),
 				  SXGBE_TX_QUEUES, SXGBE_RX_QUEUES);
@@ -2038,7 +2097,9 @@ struct sxgbe_priv_data *sxgbe_drv_probe(struct device *device,
 
 	ndev->netdev_ops = &sxgbe_netdev_ops;
 
-	ndev->hw_features = NETIF_F_SG | NETIF_F_RXCSUM;
+	ndev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+		NETIF_F_RXCSUM | NETIF_F_TSO | NETIF_F_TSO6 |
+		NETIF_F_GRO;
 	ndev->features |= ndev->hw_features | NETIF_F_HIGHDMA;
 	ndev->watchdog_timeo = msecs_to_jiffies(TX_TIMEO);
 
@@ -2047,6 +2108,13 @@ struct sxgbe_priv_data *sxgbe_drv_probe(struct device *device,
 
 	priv->msg_enable = netif_msg_init(debug, default_msg_level);
 
+	/* Enable TCP segmentation offload for all DMA channels */
+	if (priv->hw_cap.tcpseg_offload) {
+		SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) {
+			priv->hw->dma->enable_tso(priv->ioaddr, queue_num);
+		}
+	}
+
 	/* Rx Watchdog is available, enable depend on platform data */
 	if (!priv->plat->riwt_off) {
 		priv->use_riwt = 1;
-- 
cgit v1.2.2


From 8f7807ae41bb57e003b7dc07e83e186d11747bde Mon Sep 17 00:00:00 2001
From: Vipul Pandya <vipul.pandya@samsung.com>
Date: Tue, 25 Mar 2014 12:11:02 -0700
Subject: net: sxgbe: add Checksum offload support for Samsung sxgbe

This patch adds TX and RX checksum offload support.

Signed-off-by: Vipul Pandya <vipul.pandya@samsung.com>
Neatening-by: Joe Perches <joe@perches.com>
Signed-off-by: Byungho An <bh74.an@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/samsung/sxgbe/sxgbe_common.h |  5 +++
 drivers/net/ethernet/samsung/sxgbe/sxgbe_core.c   | 20 ++++++++++
 drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.h   |  2 +-
 drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c   | 46 +++++++++++++++++------
 4 files changed, 61 insertions(+), 12 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_common.h b/drivers/net/ethernet/samsung/sxgbe/sxgbe_common.h
index 7293c4c14be8..4893cfd298a7 100644
--- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_common.h
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_common.h
@@ -340,6 +340,10 @@ struct sxgbe_core_ops {
 	void (*set_eee_timer)(void __iomem *ioaddr, const int ls,
 			      const int tw);
 	void (*set_eee_pls)(void __iomem *ioaddr, const int link);
+
+	/* Enable disable checksum offload operations */
+	void (*enable_rx_csum)(void __iomem *ioaddr);
+	void (*disable_rx_csum)(void __iomem *ioaddr);
 };
 
 const struct sxgbe_core_ops *sxgbe_get_core_ops(void);
@@ -452,6 +456,7 @@ struct sxgbe_priv_data {
 	struct sxgbe_ops *hw;	/* sxgbe specific ops */
 	int no_csum_insertion;
 	int irq;
+	int rxcsum_insertion;
 	spinlock_t stats_lock;	/* lock for tx/rx statatics */
 
 	struct phy_device *phydev;
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_core.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_core.c
index 01647901f55f..66d4a74a137c 100644
--- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_core.c
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_core.c
@@ -218,6 +218,24 @@ static void  sxgbe_set_eee_timer(void __iomem *ioaddr,
 	writel(value, ioaddr + SXGBE_CORE_LPI_TIMER_CTRL);
 }
 
+static void sxgbe_enable_rx_csum(void __iomem *ioaddr)
+{
+	u32 ctrl;
+
+	ctrl = readl(ioaddr + SXGBE_CORE_RX_CONFIG_REG);
+	ctrl |= SXGBE_RX_CSUMOFFLOAD_ENABLE;
+	writel(ctrl, ioaddr + SXGBE_CORE_RX_CONFIG_REG);
+}
+
+static void sxgbe_disable_rx_csum(void __iomem *ioaddr)
+{
+	u32 ctrl;
+
+	ctrl = readl(ioaddr + SXGBE_CORE_RX_CONFIG_REG);
+	ctrl &= ~SXGBE_RX_CSUMOFFLOAD_ENABLE;
+	writel(ctrl, ioaddr + SXGBE_CORE_RX_CONFIG_REG);
+}
+
 const struct sxgbe_core_ops core_ops = {
 	.core_init		= sxgbe_core_init,
 	.dump_regs		= sxgbe_core_dump_regs,
@@ -234,6 +252,8 @@ const struct sxgbe_core_ops core_ops = {
 	.reset_eee_mode		= sxgbe_reset_eee_mode,
 	.set_eee_timer		= sxgbe_set_eee_timer,
 	.set_eee_pls		= sxgbe_set_eee_pls,
+	.enable_rx_csum		= sxgbe_enable_rx_csum,
+	.disable_rx_csum	= sxgbe_disable_rx_csum,
 };
 
 const struct sxgbe_core_ops *sxgbe_get_core_ops(void)
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.h b/drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.h
index 6d44b9faf64e..838cb9fb0ea9 100644
--- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.h
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.h
@@ -113,7 +113,7 @@ struct sxgbe_rx_norm_desc {
 			/* WB RDES3 */
 			u32 pkt_len:14;
 			u32 rdes3_reserved:1;
-			u32 err_summary:15;
+			u32 err_summary:1;
 			u32 err_l2_type:4;
 			u32 layer34_pkt_type:4;
 			u32 no_coagulation_pkt:1;
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
index dc0249bfa03b..96b4b2c25b16 100644
--- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
@@ -1252,6 +1252,7 @@ void sxgbe_tso_prepare(struct sxgbe_priv_data *priv,
 static netdev_tx_t sxgbe_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	unsigned int entry, frag_num;
+	int cksum_flag = 0;
 	struct netdev_queue *dev_txq;
 	unsigned txq_index = skb_get_queue_mapping(skb);
 	struct sxgbe_priv_data *priv = netdev_priv(dev);
@@ -1332,7 +1333,7 @@ static netdev_tx_t sxgbe_xmit(struct sk_buff *skb, struct net_device *dev)
 					   __func__);
 
 			priv->hw->desc->prepare_tx_desc(tx_desc, 1, no_pagedlen,
-							no_pagedlen, 0);
+							no_pagedlen, cksum_flag);
 		}
 	}
 
@@ -1350,7 +1351,7 @@ static netdev_tx_t sxgbe_xmit(struct sk_buff *skb, struct net_device *dev)
 
 		/* prepare the descriptor */
 		priv->hw->desc->prepare_tx_desc(tx_desc, 0, len,
-						len, 0);
+						len, cksum_flag);
 		/* memory barrier to flush descriptor */
 		wmb();
 
@@ -1471,6 +1472,8 @@ static int sxgbe_rx(struct sxgbe_priv_data *priv, int limit)
 	unsigned int entry = priv->rxq[qnum]->cur_rx;
 	unsigned int next_entry = 0;
 	unsigned int count = 0;
+	int checksum;
+	int status;
 
 	while (count < limit) {
 		struct sxgbe_rx_norm_desc *p;
@@ -1487,7 +1490,18 @@ static int sxgbe_rx(struct sxgbe_priv_data *priv, int limit)
 		next_entry = (++priv->rxq[qnum]->cur_rx) % rxsize;
 		prefetch(priv->rxq[qnum]->dma_rx + next_entry);
 
-		/*TO DO read the status of the incoming frame */
+		/* Read the status of the incoming frame and also get checksum
+		 * value based on whether it is enabled in SXGBE hardware or
+		 * not.
+		 */
+		status = priv->hw->desc->rx_wbstatus(p, &priv->xstats,
+						     &checksum);
+		if (unlikely(status < 0)) {
+			entry = next_entry;
+			continue;
+		}
+		if (unlikely(!priv->rxcsum_insertion))
+			checksum = CHECKSUM_NONE;
 
 		skb = priv->rxq[qnum]->rx_skbuff[entry];
 
@@ -1501,7 +1515,11 @@ static int sxgbe_rx(struct sxgbe_priv_data *priv, int limit)
 
 		skb_put(skb, frame_len);
 
-		netif_receive_skb(skb);
+		skb->ip_summed = checksum;
+		if (checksum == CHECKSUM_NONE)
+			netif_receive_skb(skb);
+		else
+			napi_gro_receive(&priv->napi, skb);
 
 		entry = next_entry;
 	}
@@ -1748,15 +1766,15 @@ static int sxgbe_set_features(struct net_device *dev,
 {
 	struct sxgbe_priv_data *priv = netdev_priv(dev);
 	netdev_features_t changed = dev->features ^ features;
-	u32 ctrl;
 
 	if (changed & NETIF_F_RXCSUM) {
-		ctrl = readl(priv->ioaddr + SXGBE_CORE_RX_CONFIG_REG);
-		if (features & NETIF_F_RXCSUM)
-			ctrl |= SXGBE_RX_CSUMOFFLOAD_ENABLE;
-		else
-			ctrl &= ~SXGBE_RX_CSUMOFFLOAD_ENABLE;
-		writel(ctrl, priv->ioaddr + SXGBE_CORE_RX_CONFIG_REG);
+		if (features & NETIF_F_RXCSUM) {
+			priv->hw->mac->enable_rx_csum(priv->ioaddr);
+			priv->rxcsum_insertion = true;
+		} else {
+			priv->hw->mac->disable_rx_csum(priv->ioaddr);
+			priv->rxcsum_insertion = false;
+		}
 	}
 
 	return 0;
@@ -2115,6 +2133,12 @@ struct sxgbe_priv_data *sxgbe_drv_probe(struct device *device,
 		}
 	}
 
+	/* Enable Rx checksum offload */
+	if (priv->hw_cap.rx_csum_offload) {
+		priv->hw->mac->enable_rx_csum(priv->ioaddr);
+		priv->rxcsum_insertion = true;
+	}
+
 	/* Rx Watchdog is available, enable depend on platform data */
 	if (!priv->plat->riwt_off) {
 		priv->use_riwt = 1;
-- 
cgit v1.2.2


From 25f72a746aca07d0d9cae7e093fe15613fc62ee3 Mon Sep 17 00:00:00 2001
From: Vipul Pandya <vipul.pandya@samsung.com>
Date: Tue, 25 Mar 2014 12:11:02 -0700
Subject: net: sxgbe: add ethtool related functions support Samsung sxgbe

This patch adds ethtool related functions.

Signed-off-by: Vipul Pandya <vipul.pandya@samsung.com>
Neatening-by: Joe Perches <joe@perches.com>
Signed-off-by: Byungho An <bh74.an@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/samsung/sxgbe/sxgbe_common.h  |  16 +-
 drivers/net/ethernet/samsung/sxgbe/sxgbe_ethtool.c | 433 +++++++++++++++++++++
 drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c    |   4 +
 drivers/net/ethernet/samsung/sxgbe/sxgbe_reg.h     |   6 +
 4 files changed, 458 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_common.h b/drivers/net/ethernet/samsung/sxgbe/sxgbe_common.h
index 4893cfd298a7..6203c7d8550f 100644
--- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_common.h
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_common.h
@@ -197,6 +197,20 @@ enum dma_irq_status {
 #define SXGBE_FOR_EACH_QUEUE(max_queues, queue_num)			\
 	for (queue_num = 0; queue_num < max_queues; queue_num++)
 
+#define DRV_VERSION "1.0.0"
+
+#define SXGBE_MAX_RX_CHANNELS	16
+#define SXGBE_MAX_TX_CHANNELS	16
+
+#define START_MAC_REG_OFFSET	0x0000
+#define MAX_MAC_REG_OFFSET	0x0DFC
+#define START_MTL_REG_OFFSET	0x1000
+#define MAX_MTL_REG_OFFSET	0x18FC
+#define START_DMA_REG_OFFSET	0x3000
+#define MAX_DMA_REG_OFFSET	0x38FC
+
+#define REG_SPACE_SIZE		0x2000
+
 /* sxgbe statistics counters */
 struct sxgbe_extra_stats {
 	/* TX/RX IRQ events */
@@ -482,6 +496,7 @@ struct sxgbe_priv_data {
 	/* advanced time stamp support */
 	u32 adv_ts;
 	int use_riwt;
+	struct ptp_clock *ptp_clock;
 
 	/* tc control */
 	int tx_tc;
@@ -517,5 +532,4 @@ const struct sxgbe_mtl_ops *sxgbe_get_mtl_ops(void);
 
 void sxgbe_disable_eee_mode(struct sxgbe_priv_data * const priv);
 bool sxgbe_eee_init(struct sxgbe_priv_data * const priv);
-
 #endif /* __SXGBE_COMMON_H__ */
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_ethtool.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_ethtool.c
index ca95f1daefd8..0415fa50eeb7 100644
--- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_ethtool.c
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_ethtool.c
@@ -12,11 +12,17 @@
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
+#include <linux/clk.h>
+#include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/netdevice.h>
+#include <linux/net_tstamp.h>
 #include <linux/phy.h>
+#include <linux/ptp_clock_kernel.h>
 
 #include "sxgbe_common.h"
+#include "sxgbe_reg.h"
+#include "sxgbe_dma.h"
 
 struct sxgbe_stats {
 	char stat_string[ETH_GSTRING_LEN];
@@ -32,11 +38,100 @@ struct sxgbe_stats {
 }
 
 static const struct sxgbe_stats sxgbe_gstrings_stats[] = {
+	/* TX/RX IRQ events */
+	SXGBE_STAT(tx_process_stopped_irq),
+	SXGBE_STAT(tx_ctxt_desc_err),
+	SXGBE_STAT(tx_threshold),
+	SXGBE_STAT(rx_threshold),
+	SXGBE_STAT(tx_pkt_n),
+	SXGBE_STAT(rx_pkt_n),
+	SXGBE_STAT(normal_irq_n),
+	SXGBE_STAT(tx_normal_irq_n),
+	SXGBE_STAT(rx_normal_irq_n),
+	SXGBE_STAT(napi_poll),
+	SXGBE_STAT(tx_clean),
+	SXGBE_STAT(tx_reset_ic_bit),
+	SXGBE_STAT(rx_process_stopped_irq),
+	SXGBE_STAT(rx_underflow_irq),
+
+	/* Bus access errors */
+	SXGBE_STAT(fatal_bus_error_irq),
+	SXGBE_STAT(tx_read_transfer_err),
+	SXGBE_STAT(tx_write_transfer_err),
+	SXGBE_STAT(tx_desc_access_err),
+	SXGBE_STAT(tx_buffer_access_err),
+	SXGBE_STAT(tx_data_transfer_err),
+	SXGBE_STAT(rx_read_transfer_err),
+	SXGBE_STAT(rx_write_transfer_err),
+	SXGBE_STAT(rx_desc_access_err),
+	SXGBE_STAT(rx_buffer_access_err),
+	SXGBE_STAT(rx_data_transfer_err),
+
+	/* EEE-LPI stats */
 	SXGBE_STAT(tx_lpi_entry_n),
 	SXGBE_STAT(tx_lpi_exit_n),
 	SXGBE_STAT(rx_lpi_entry_n),
 	SXGBE_STAT(rx_lpi_exit_n),
 	SXGBE_STAT(eee_wakeup_error_n),
+
+	/* RX specific */
+	/* L2 error */
+	SXGBE_STAT(rx_code_gmii_err),
+	SXGBE_STAT(rx_watchdog_err),
+	SXGBE_STAT(rx_crc_err),
+	SXGBE_STAT(rx_gaint_pkt_err),
+	SXGBE_STAT(ip_hdr_err),
+	SXGBE_STAT(ip_payload_err),
+	SXGBE_STAT(overflow_error),
+
+	/* L2 Pkt type */
+	SXGBE_STAT(len_pkt),
+	SXGBE_STAT(mac_ctl_pkt),
+	SXGBE_STAT(dcb_ctl_pkt),
+	SXGBE_STAT(arp_pkt),
+	SXGBE_STAT(oam_pkt),
+	SXGBE_STAT(untag_okt),
+	SXGBE_STAT(other_pkt),
+	SXGBE_STAT(svlan_tag_pkt),
+	SXGBE_STAT(cvlan_tag_pkt),
+	SXGBE_STAT(dvlan_ocvlan_icvlan_pkt),
+	SXGBE_STAT(dvlan_osvlan_isvlan_pkt),
+	SXGBE_STAT(dvlan_osvlan_icvlan_pkt),
+	SXGBE_STAT(dvan_ocvlan_icvlan_pkt),
+
+	/* L3/L4 Pkt type */
+	SXGBE_STAT(not_ip_pkt),
+	SXGBE_STAT(ip4_tcp_pkt),
+	SXGBE_STAT(ip4_udp_pkt),
+	SXGBE_STAT(ip4_icmp_pkt),
+	SXGBE_STAT(ip4_unknown_pkt),
+	SXGBE_STAT(ip6_tcp_pkt),
+	SXGBE_STAT(ip6_udp_pkt),
+	SXGBE_STAT(ip6_icmp_pkt),
+	SXGBE_STAT(ip6_unknown_pkt),
+
+	/* Filter specific */
+	SXGBE_STAT(vlan_filter_match),
+	SXGBE_STAT(sa_filter_fail),
+	SXGBE_STAT(da_filter_fail),
+	SXGBE_STAT(hash_filter_pass),
+	SXGBE_STAT(l3_filter_match),
+	SXGBE_STAT(l4_filter_match),
+
+	/* RX context specific */
+	SXGBE_STAT(timestamp_dropped),
+	SXGBE_STAT(rx_msg_type_no_ptp),
+	SXGBE_STAT(rx_ptp_type_sync),
+	SXGBE_STAT(rx_ptp_type_follow_up),
+	SXGBE_STAT(rx_ptp_type_delay_req),
+	SXGBE_STAT(rx_ptp_type_delay_resp),
+	SXGBE_STAT(rx_ptp_type_pdelay_req),
+	SXGBE_STAT(rx_ptp_type_pdelay_resp),
+	SXGBE_STAT(rx_ptp_type_pdelay_follow_up),
+	SXGBE_STAT(rx_ptp_announce),
+	SXGBE_STAT(rx_ptp_mgmt),
+	SXGBE_STAT(rx_ptp_signal),
+	SXGBE_STAT(rx_ptp_resv_msg_type),
 };
 #define SXGBE_STATS_LEN ARRAY_SIZE(sxgbe_gstrings_stats)
 
@@ -80,7 +175,345 @@ static int sxgbe_set_eee(struct net_device *dev,
 	return phy_ethtool_set_eee(priv->phydev, edata);
 }
 
+static void sxgbe_getdrvinfo(struct net_device *dev,
+			     struct ethtool_drvinfo *info)
+{
+	strlcpy(info->driver, KBUILD_MODNAME, sizeof(info->driver));
+	strlcpy(info->version, DRV_VERSION, sizeof(info->version));
+}
+
+static int sxgbe_getsettings(struct net_device *dev,
+			     struct ethtool_cmd *cmd)
+{
+	struct sxgbe_priv_data *priv = netdev_priv(dev);
+
+	if (priv->phydev)
+		return phy_ethtool_gset(priv->phydev, cmd);
+
+	return -EOPNOTSUPP;
+}
+
+static int sxgbe_setsettings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct sxgbe_priv_data *priv = netdev_priv(dev);
+
+	if (priv->phydev)
+		return phy_ethtool_sset(priv->phydev, cmd);
+
+	return -EOPNOTSUPP;
+}
+
+static u32 sxgbe_getmsglevel(struct net_device *dev)
+{
+	struct sxgbe_priv_data *priv = netdev_priv(dev);
+	return priv->msg_enable;
+}
+
+static void sxgbe_setmsglevel(struct net_device *dev, u32 level)
+{
+	struct sxgbe_priv_data *priv = netdev_priv(dev);
+	priv->msg_enable = level;
+}
+
+static void sxgbe_get_strings(struct net_device *dev, u32 stringset, u8 *data)
+{
+	int i;
+	u8 *p = data;
+
+	switch (stringset) {
+	case ETH_SS_STATS:
+		for (i = 0; i < SXGBE_STATS_LEN; i++) {
+			memcpy(p, sxgbe_gstrings_stats[i].stat_string,
+			       ETH_GSTRING_LEN);
+			p += ETH_GSTRING_LEN;
+		}
+		break;
+	default:
+		WARN_ON(1);
+		break;
+	}
+}
+
+static int sxgbe_get_sset_count(struct net_device *netdev, int sset)
+{
+	int len;
+
+	switch (sset) {
+	case ETH_SS_STATS:
+		len = SXGBE_STATS_LEN;
+		return len;
+	default:
+		return -EINVAL;
+	}
+}
+
+static void sxgbe_get_ethtool_stats(struct net_device *dev,
+				    struct ethtool_stats *dummy, u64 *data)
+{
+	struct sxgbe_priv_data *priv = netdev_priv(dev);
+	int i;
+	char *p;
+
+	if (priv->eee_enabled) {
+		int val = phy_get_eee_err(priv->phydev);
+
+		if (val)
+			priv->xstats.eee_wakeup_error_n = val;
+	}
+
+	for (i = 0; i < SXGBE_STATS_LEN; i++) {
+		p = (char *)priv + sxgbe_gstrings_stats[i].stat_offset;
+		data[i] = (sxgbe_gstrings_stats[i].sizeof_stat == sizeof(u64))
+			? (*(u64 *)p) : (*(u32 *)p);
+	}
+}
+
+static void sxgbe_get_channels(struct net_device *dev,
+			       struct ethtool_channels *channel)
+{
+	channel->max_rx = SXGBE_MAX_RX_CHANNELS;
+	channel->max_tx = SXGBE_MAX_TX_CHANNELS;
+	channel->rx_count = SXGBE_RX_QUEUES;
+	channel->tx_count = SXGBE_TX_QUEUES;
+}
+
+static u32 sxgbe_riwt2usec(u32 riwt, struct sxgbe_priv_data *priv)
+{
+	unsigned long clk = clk_get_rate(priv->sxgbe_clk);
+
+	if (!clk)
+		return 0;
+
+	return (riwt * 256) / (clk / 1000000);
+}
+
+static u32 sxgbe_usec2riwt(u32 usec, struct sxgbe_priv_data *priv)
+{
+	unsigned long clk = clk_get_rate(priv->sxgbe_clk);
+
+	if (!clk)
+		return 0;
+
+	return (usec * (clk / 1000000)) / 256;
+}
+
+static int sxgbe_get_coalesce(struct net_device *dev,
+			      struct ethtool_coalesce *ec)
+{
+	struct sxgbe_priv_data *priv = netdev_priv(dev);
+
+	if (priv->use_riwt)
+		ec->rx_coalesce_usecs = sxgbe_riwt2usec(priv->rx_riwt, priv);
+
+	return 0;
+}
+
+static int sxgbe_set_coalesce(struct net_device *dev,
+			      struct ethtool_coalesce *ec)
+{
+	struct sxgbe_priv_data *priv = netdev_priv(dev);
+	unsigned int rx_riwt;
+
+	if (!ec->rx_coalesce_usecs)
+		return -EINVAL;
+
+	rx_riwt = sxgbe_usec2riwt(ec->rx_coalesce_usecs, priv);
+
+	if ((rx_riwt > SXGBE_MAX_DMA_RIWT) || (rx_riwt < SXGBE_MIN_DMA_RIWT))
+		return -EINVAL;
+	else if (!priv->use_riwt)
+		return -EOPNOTSUPP;
+
+	priv->rx_riwt = rx_riwt;
+	priv->hw->dma->rx_watchdog(priv->ioaddr, priv->rx_riwt);
+
+	return 0;
+}
+
+static int sxgbe_get_rss_hash_opts(struct sxgbe_priv_data *priv,
+				   struct ethtool_rxnfc *cmd)
+{
+	cmd->data = 0;
+
+	/* Report default options for RSS on sxgbe */
+	switch (cmd->flow_type) {
+	case TCP_V4_FLOW:
+	case UDP_V4_FLOW:
+		cmd->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3;
+	case SCTP_V4_FLOW:
+	case AH_ESP_V4_FLOW:
+	case AH_V4_FLOW:
+	case ESP_V4_FLOW:
+	case IPV4_FLOW:
+		cmd->data |= RXH_IP_SRC | RXH_IP_DST;
+		break;
+	case TCP_V6_FLOW:
+	case UDP_V6_FLOW:
+		cmd->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3;
+	case SCTP_V6_FLOW:
+	case AH_ESP_V6_FLOW:
+	case AH_V6_FLOW:
+	case ESP_V6_FLOW:
+	case IPV6_FLOW:
+		cmd->data |= RXH_IP_SRC | RXH_IP_DST;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int sxgbe_get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd,
+			   u32 *rule_locs)
+{
+	struct sxgbe_priv_data *priv = netdev_priv(dev);
+	int ret = -EOPNOTSUPP;
+
+	switch (cmd->cmd) {
+	case ETHTOOL_GRXFH:
+		ret = sxgbe_get_rss_hash_opts(priv, cmd);
+		break;
+	default:
+		break;
+	}
+
+	return ret;
+}
+
+static int sxgbe_set_rss_hash_opt(struct sxgbe_priv_data *priv,
+				  struct ethtool_rxnfc *cmd)
+{
+	u32 reg_val = 0;
+
+	/* RSS does not support anything other than hashing
+	 * to queues on src and dst IPs and ports
+	 */
+	if (cmd->data & ~(RXH_IP_SRC | RXH_IP_DST |
+			  RXH_L4_B_0_1 | RXH_L4_B_2_3))
+		return -EINVAL;
+
+	switch (cmd->flow_type) {
+	case TCP_V4_FLOW:
+	case TCP_V6_FLOW:
+		if (!(cmd->data & RXH_IP_SRC) ||
+		    !(cmd->data & RXH_IP_DST) ||
+		    !(cmd->data & RXH_L4_B_0_1) ||
+		    !(cmd->data & RXH_L4_B_2_3))
+			return -EINVAL;
+		reg_val = SXGBE_CORE_RSS_CTL_TCP4TE;
+		break;
+	case UDP_V4_FLOW:
+	case UDP_V6_FLOW:
+		if (!(cmd->data & RXH_IP_SRC) ||
+		    !(cmd->data & RXH_IP_DST) ||
+		    !(cmd->data & RXH_L4_B_0_1) ||
+		    !(cmd->data & RXH_L4_B_2_3))
+			return -EINVAL;
+		reg_val = SXGBE_CORE_RSS_CTL_UDP4TE;
+		break;
+	case SCTP_V4_FLOW:
+	case AH_ESP_V4_FLOW:
+	case AH_V4_FLOW:
+	case ESP_V4_FLOW:
+	case AH_ESP_V6_FLOW:
+	case AH_V6_FLOW:
+	case ESP_V6_FLOW:
+	case SCTP_V6_FLOW:
+	case IPV4_FLOW:
+	case IPV6_FLOW:
+		if (!(cmd->data & RXH_IP_SRC) ||
+		    !(cmd->data & RXH_IP_DST) ||
+		    (cmd->data & RXH_L4_B_0_1) ||
+		    (cmd->data & RXH_L4_B_2_3))
+			return -EINVAL;
+		reg_val = SXGBE_CORE_RSS_CTL_IP2TE;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* Read SXGBE RSS control register and update */
+	reg_val |= readl(priv->ioaddr + SXGBE_CORE_RSS_CTL_REG);
+	writel(reg_val, priv->ioaddr + SXGBE_CORE_RSS_CTL_REG);
+	readl(priv->ioaddr + SXGBE_CORE_RSS_CTL_REG);
+
+	return 0;
+}
+
+static int sxgbe_set_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd)
+{
+	struct sxgbe_priv_data *priv = netdev_priv(dev);
+	int ret = -EOPNOTSUPP;
+
+	switch (cmd->cmd) {
+	case ETHTOOL_SRXFH:
+		ret = sxgbe_set_rss_hash_opt(priv, cmd);
+		break;
+	default:
+		break;
+	}
+
+	return ret;
+}
+
+static void sxgbe_get_regs(struct net_device *dev,
+			   struct ethtool_regs *regs, void *space)
+{
+	struct sxgbe_priv_data *priv = netdev_priv(dev);
+	u32 *reg_space = (u32 *)space;
+	int reg_offset;
+	int reg_ix = 0;
+	void __iomem *ioaddr = priv->ioaddr;
+
+	memset(reg_space, 0x0, REG_SPACE_SIZE);
+
+	/* MAC registers */
+	for (reg_offset = START_MAC_REG_OFFSET;
+	     reg_offset <= MAX_MAC_REG_OFFSET; reg_offset += 4) {
+		reg_space[reg_ix] = readl(ioaddr + reg_offset);
+		reg_ix++;
+	}
+
+	/* MTL registers */
+	for (reg_offset = START_MTL_REG_OFFSET;
+	     reg_offset <= MAX_MTL_REG_OFFSET; reg_offset += 4) {
+		reg_space[reg_ix] = readl(ioaddr + reg_offset);
+		reg_ix++;
+	}
+
+	/* DMA registers */
+	for (reg_offset = START_DMA_REG_OFFSET;
+	     reg_offset <= MAX_DMA_REG_OFFSET; reg_offset += 4) {
+		reg_space[reg_ix] = readl(ioaddr + reg_offset);
+		reg_ix++;
+	}
+
+	BUG_ON(reg_ix * 4 > REG_SPACE_SIZE);
+}
+
+static int sxgbe_get_regs_len(struct net_device *dev)
+{
+	return REG_SPACE_SIZE;
+}
+
 static const struct ethtool_ops sxgbe_ethtool_ops = {
+	.get_drvinfo = sxgbe_getdrvinfo,
+	.get_settings = sxgbe_getsettings,
+	.set_settings = sxgbe_setsettings,
+	.get_msglevel = sxgbe_getmsglevel,
+	.set_msglevel = sxgbe_setmsglevel,
+	.get_link = ethtool_op_get_link,
+	.get_strings = sxgbe_get_strings,
+	.get_ethtool_stats = sxgbe_get_ethtool_stats,
+	.get_sset_count = sxgbe_get_sset_count,
+	.get_channels = sxgbe_get_channels,
+	.get_coalesce = sxgbe_get_coalesce,
+	.set_coalesce = sxgbe_set_coalesce,
+	.get_rxnfc = sxgbe_get_rxnfc,
+	.set_rxnfc = sxgbe_set_rxnfc,
+	.get_regs = sxgbe_get_regs,
+	.get_regs_len = sxgbe_get_regs_len,
 	.get_eee = sxgbe_get_eee,
 	.set_eee = sxgbe_set_eee,
 };
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
index 96b4b2c25b16..1869d4c6e454 100644
--- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
@@ -2139,6 +2139,10 @@ struct sxgbe_priv_data *sxgbe_drv_probe(struct device *device,
 		priv->rxcsum_insertion = true;
 	}
 
+	/* Initialise pause frame settings */
+	priv->rx_pause = 1;
+	priv->tx_pause = 1;
+
 	/* Rx Watchdog is available, enable depend on platform data */
 	if (!priv->plat->riwt_off) {
 		priv->use_riwt = 1;
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_reg.h b/drivers/net/ethernet/samsung/sxgbe/sxgbe_reg.h
index 85a7b3104a1a..5a89acb4c505 100644
--- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_reg.h
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_reg.h
@@ -195,6 +195,12 @@
 #define SXGBE_CORE_RSS_ADD_REG		0x0C88
 #define SXGBE_CORE_RSS_DATA_REG		0x0C8C
 
+/* RSS control register bits */
+#define SXGBE_CORE_RSS_CTL_UDP4TE	BIT(3)
+#define SXGBE_CORE_RSS_CTL_TCP4TE	BIT(2)
+#define SXGBE_CORE_RSS_CTL_IP2TE	BIT(1)
+#define SXGBE_CORE_RSS_CTL_RSSE		BIT(0)
+
 /* IEEE 1588 registers */
 #define SXGBE_CORE_TSTAMP_CTL_REG	0x0D00
 #define SXGBE_CORE_SUBSEC_INC_REG	0x0D04
-- 
cgit v1.2.2


From 8800a244fa1ab75192cf65ecf8e3ca3ec1420b1b Mon Sep 17 00:00:00 2001
From: Monam Agarwal <monamagarwal123@gmail.com>
Date: Mon, 24 Mar 2014 00:00:17 +0530
Subject: drivers/net: Use RCU_INIT_POINTER(x, NULL) in bonding/bond_options.c

This patch replaces rcu_assign_pointer(x, NULL) with RCU_INIT_POINTER(x, NULL)

The rcu_assign_pointer() ensures that the initialization of a structure
is carried out before storing a pointer to that structure.
And in the case of the NULL pointer, there is no structure to initialize.
So, rcu_assign_pointer(p, NULL) can be safely converted to RCU_INIT_POINTER(p, NULL)

Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_options.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_options.c b/drivers/net/bonding/bond_options.c
index 6e6b09359ec3..724e30fa20b9 100644
--- a/drivers/net/bonding/bond_options.c
+++ b/drivers/net/bonding/bond_options.c
@@ -712,7 +712,7 @@ static int bond_option_active_slave_set(struct bonding *bond,
 	/* check to see if we are clearing active */
 	if (!slave_dev) {
 		pr_info("%s: Clearing current active slave\n", bond->dev->name);
-		rcu_assign_pointer(bond->curr_active_slave, NULL);
+		RCU_INIT_POINTER(bond->curr_active_slave, NULL);
 		bond_select_active_slave(bond);
 	} else {
 		struct slave *old_active = bond->curr_active_slave;
-- 
cgit v1.2.2


From c956674b7c89e7992a09df309a9f226f02733421 Mon Sep 17 00:00:00 2001
From: Monam Agarwal <monamagarwal123@gmail.com>
Date: Mon, 24 Mar 2014 00:02:32 +0530
Subject: drivers/net: Use RCU_INIT_POINTER(x, NULL) in tun.c

This patch replaces rcu_assign_pointer(x, NULL) with RCU_INIT_POINTER(x, NULL)

The rcu_assign_pointer() ensures that the initialization of a structure
is carried out before storing a pointer to that structure.
And in the case of the NULL pointer, there is no structure to initialize.
So, rcu_assign_pointer(p, NULL) can be safely converted to RCU_INIT_POINTER(p, NULL)

Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tun.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 26f8635b027d..ee328ba101e7 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -452,7 +452,7 @@ static void __tun_detach(struct tun_file *tfile, bool clean)
 
 		--tun->numqueues;
 		if (clean) {
-			rcu_assign_pointer(tfile->tun, NULL);
+			RCU_INIT_POINTER(tfile->tun, NULL);
 			sock_put(&tfile->sk);
 		} else
 			tun_disable_queue(tun, tfile);
@@ -499,12 +499,12 @@ static void tun_detach_all(struct net_device *dev)
 		tfile = rtnl_dereference(tun->tfiles[i]);
 		BUG_ON(!tfile);
 		wake_up_all(&tfile->wq.wait);
-		rcu_assign_pointer(tfile->tun, NULL);
+		RCU_INIT_POINTER(tfile->tun, NULL);
 		--tun->numqueues;
 	}
 	list_for_each_entry(tfile, &tun->disabled, next) {
 		wake_up_all(&tfile->wq.wait);
-		rcu_assign_pointer(tfile->tun, NULL);
+		RCU_INIT_POINTER(tfile->tun, NULL);
 	}
 	BUG_ON(tun->numqueues != 0);
 
@@ -2194,7 +2194,7 @@ static int tun_chr_open(struct inode *inode, struct file * file)
 					    &tun_proto);
 	if (!tfile)
 		return -ENOMEM;
-	rcu_assign_pointer(tfile->tun, NULL);
+	RCU_INIT_POINTER(tfile->tun, NULL);
 	tfile->net = get_net(current->nsproxy->net_ns);
 	tfile->flags = 0;
 	tfile->ifindex = 0;
-- 
cgit v1.2.2


From 4818d82899aa97a482ba3508cd75864a60c483ac Mon Sep 17 00:00:00 2001
From: Andrea Merello <andrea.merello@gmail.com>
Date: Sat, 22 Mar 2014 18:49:08 +0100
Subject: rtl8180: fix DMA register are written two times

Hw DMA registers are written in rtl8180_init_hw function.
They are also written again just after calling rtl8180_init_hw.
There is no point in doing this twice.

Remove those redundant register writes from rtl8180_start.

Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl8180/dev.c | 6 ------
 1 file changed, 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c
index 0b405b8c8d70..091eb2eb1a3c 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c
@@ -635,12 +635,6 @@ static int rtl8180_start(struct ieee80211_hw *dev)
 	if (ret)
 		goto err_free_rings;
 
-	rtl818x_iowrite32(priv, &priv->map->RDSAR, priv->rx_ring_dma);
-	rtl818x_iowrite32(priv, &priv->map->TBDA, priv->tx_ring[3].dma);
-	rtl818x_iowrite32(priv, &priv->map->THPDA, priv->tx_ring[2].dma);
-	rtl818x_iowrite32(priv, &priv->map->TNPDA, priv->tx_ring[1].dma);
-	rtl818x_iowrite32(priv, &priv->map->TLPDA, priv->tx_ring[0].dma);
-
 	ret = request_irq(priv->pdev->irq, rtl8180_interrupt,
 			  IRQF_SHARED, KBUILD_MODNAME, dev);
 	if (ret) {
-- 
cgit v1.2.2


From fd6564fcdc0bfcd432e6e939f9538acc3905d08a Mon Sep 17 00:00:00 2001
From: Andrea Merello <andrea.merello@gmail.com>
Date: Sat, 22 Mar 2014 18:51:20 +0100
Subject: rtl8180: rationalize TX queues

On currently supported HW there are four TX queues (three for normal
packets and one for beacons).

The driver uses just one TX queue, and declare to mac80211 to
support just one queue, but it allocates coherent memory for all
queues.
Furthermore the TX is code is written assumimg four queues exists,
and even if we decide to enable more queues in future, its mapping
rule to mac80211 is fixed.

This means we have memory waste on rtl8180/rtl8185, and we have also
not enough flexibility to add support for boards (rtl8187se) that
will use more queues.

This patch changes things in order to allocate coherent memory only
for the queues effectively used and it make it possible to specify
how to map hardware queues on mac80211 queues, that will be used
by rtl8187se code as soon it will be merged.

Note: even if the beacon queue is currently unused, this should
change, so I kept it.

Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl8180/dev.c     | 58 +++++++++++++++++++-------
 drivers/net/wireless/rtl818x/rtl8180/rtl8180.h |  7 +++-
 2 files changed, 49 insertions(+), 16 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c
index 091eb2eb1a3c..767e1048f336 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c
@@ -85,6 +85,30 @@ static const struct ieee80211_channel rtl818x_channels[] = {
 	{ .center_freq = 2484 },
 };
 
+/* Queues for rtl8180/rtl8185 cards
+ *
+ * name | reg  |  prio
+ *  BC  |  7   |   3
+ *  HI  |  6   |   0
+ *  NO  |  5   |   1
+ *  LO  |  4   |   2
+ *
+ * The complete map for DMA kick reg using all queue is:
+ * static const int rtl8180_queues_map[RTL8180_NR_TX_QUEUES] = {6, 5, 4, 7};
+ *
+ * .. but .. Because the mac80211 needs at least 4 queues for QoS or
+ * otherwise QoS can't be done, we use just one.
+ * Beacon queue could be used, but this is not finished yet.
+ * Actual map is:
+ *
+ * name | reg  |  prio
+ *  BC  |  7   |   1  <- currently not used yet.
+ *  HI  |  6   |   x  <- not used
+ *  NO  |  5   |   x  <- not used
+ *  LO  |  4   |   0  <- used
+ */
+
+static const int rtl8180_queues_map[RTL8180_NR_TX_QUEUES] = {4, 7};
 
 void rtl8180_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data)
 {
@@ -235,12 +259,6 @@ static irqreturn_t rtl8180_interrupt(int irq, void *dev_id)
 	rtl818x_iowrite16(priv, &priv->map->INT_STATUS, reg);
 
 	if (reg & (RTL818X_INT_TXB_OK | RTL818X_INT_TXB_ERR))
-		rtl8180_handle_tx(dev, 3);
-
-	if (reg & (RTL818X_INT_TXH_OK | RTL818X_INT_TXH_ERR))
-		rtl8180_handle_tx(dev, 2);
-
-	if (reg & (RTL818X_INT_TXN_OK | RTL818X_INT_TXN_ERR))
 		rtl8180_handle_tx(dev, 1);
 
 	if (reg & (RTL818X_INT_TXL_OK | RTL818X_INT_TXL_ERR))
@@ -264,7 +282,7 @@ static void rtl8180_tx(struct ieee80211_hw *dev,
 	struct rtl8180_tx_ring *ring;
 	struct rtl8180_tx_desc *entry;
 	unsigned long flags;
-	unsigned int idx, prio;
+	unsigned int idx, prio, hw_prio;
 	dma_addr_t mapping;
 	u32 tx_flags;
 	u8 rc_flags;
@@ -354,7 +372,11 @@ static void rtl8180_tx(struct ieee80211_hw *dev,
 
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	rtl818x_iowrite8(priv, &priv->map->TX_DMA_POLLING, (1 << (prio + 4)));
+	hw_prio = rtl8180_queues_map[prio];
+
+	rtl818x_iowrite8(priv, &priv->map->TX_DMA_POLLING,
+			 (1 << hw_prio) | /* ring to poll  */
+			 (1<<1) | (1<<2));/* stopped rings */
 }
 
 void rtl8180_set_anaparam(struct rtl8180_priv *priv, u32 anaparam)
@@ -447,9 +469,7 @@ static int rtl8180_init_hw(struct ieee80211_hw *dev)
 		rtl8180_set_anaparam(priv, priv->anaparam);
 
 	rtl818x_iowrite32(priv, &priv->map->RDSAR, priv->rx_ring_dma);
-	rtl818x_iowrite32(priv, &priv->map->TBDA, priv->tx_ring[3].dma);
-	rtl818x_iowrite32(priv, &priv->map->THPDA, priv->tx_ring[2].dma);
-	rtl818x_iowrite32(priv, &priv->map->TNPDA, priv->tx_ring[1].dma);
+	rtl818x_iowrite32(priv, &priv->map->TBDA, priv->tx_ring[1].dma);
 	rtl818x_iowrite32(priv, &priv->map->TLPDA, priv->tx_ring[0].dma);
 
 	/* TODO: necessary? specs indicate not */
@@ -627,7 +647,7 @@ static int rtl8180_start(struct ieee80211_hw *dev)
 	if (ret)
 		return ret;
 
-	for (i = 0; i < 4; i++)
+	for (i = 0; i < (dev->queues + 1); i++)
 		if ((ret = rtl8180_init_tx_ring(dev, i, 16)))
 			goto err_free_rings;
 
@@ -722,7 +742,7 @@ static int rtl8180_start(struct ieee80211_hw *dev)
 
  err_free_rings:
 	rtl8180_free_rx_ring(dev);
-	for (i = 0; i < 4; i++)
+	for (i = 0; i < (dev->queues + 1); i++)
 		if (priv->tx_ring[i].desc)
 			rtl8180_free_tx_ring(dev, i);
 
@@ -752,7 +772,7 @@ static void rtl8180_stop(struct ieee80211_hw *dev)
 	free_irq(priv->pdev->irq, dev);
 
 	rtl8180_free_rx_ring(dev);
-	for (i = 0; i < 4; i++)
+	for (i = 0; i < (dev->queues + 1); i++)
 		rtl8180_free_tx_ring(dev, i);
 }
 
@@ -1215,7 +1235,6 @@ static int rtl8180_probe(struct pci_dev *pdev,
 	dev->vif_data_size = sizeof(struct rtl8180_vif);
 	dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
 					BIT(NL80211_IFTYPE_ADHOC);
-	dev->queues = 1;
 	dev->max_signal = 65;
 
 	reg = rtl818x_ioread32(priv, &priv->map->TX_CONF);
@@ -1246,6 +1265,15 @@ static int rtl8180_probe(struct pci_dev *pdev,
 		goto err_iounmap;
 	}
 
+	/* we declare to MAC80211 all the queues except for beacon queue
+	 * that will be eventually handled by DRV.
+	 * TX rings are arranged in such a way that lower is the IDX,
+	 * higher is the priority, in order to achieve direct mapping
+	 * with mac80211, however the beacon queue is an exception and it
+	 * is mapped on the highst tx ring IDX.
+	 */
+	dev->queues = RTL8180_NR_TX_QUEUES - 1;
+
 	if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180) {
 		priv->band.n_bitrates = ARRAY_SIZE(rtl818x_rates);
 		pci_try_set_mwi(pdev);
diff --git a/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h b/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
index 26383d77fc3a..ad64c5e84857 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
+++ b/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
@@ -24,6 +24,11 @@
 #define ANAPARAM_PWR1_SHIFT	20
 #define ANAPARAM_PWR1_MASK	(0x7F << ANAPARAM_PWR1_SHIFT)
 
+/* rtl8180/rtl8185 have 3 queue + beacon queue.
+ * mac80211 can use just one, + beacon = 2 tot.
+ */
+#define RTL8180_NR_TX_QUEUES 2
+
 struct rtl8180_tx_desc {
 	__le32 flags;
 	__le16 rts_duration;
@@ -75,7 +80,7 @@ struct rtl8180_priv {
 	dma_addr_t rx_ring_dma;
 	unsigned int rx_idx;
 	struct sk_buff *rx_buf[32];
-	struct rtl8180_tx_ring tx_ring[4];
+	struct rtl8180_tx_ring tx_ring[RTL8180_NR_TX_QUEUES];
 	struct ieee80211_channel channels[14];
 	struct ieee80211_rate rates[12];
 	struct ieee80211_supported_band band;
-- 
cgit v1.2.2


From 9cb76aa994682c7a5584cf4a03aeedd7ef1204bd Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Mon, 24 Mar 2014 10:46:20 -0700
Subject: rtlwifi: Remove addressof casts to same type

Using addressof then casting to the original type is pointless,
so remove these unnecessary casts.

Done via coccinelle script:

$ cat typecast.cocci
@@
type T;
T foo;
@@

-	(T *)&foo
+	&foo

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtlwifi/pci.c          | 4 ++--
 drivers/net/wireless/rtlwifi/rtl8188ee/hw.c | 9 ++++-----
 drivers/net/wireless/rtlwifi/rtl8723ae/hw.c | 7 +++----
 drivers/net/wireless/rtlwifi/rtl8723be/hw.c | 7 +++----
 4 files changed, 12 insertions(+), 15 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c
index f26f4ffc771d..7d711708d2f3 100644
--- a/drivers/net/wireless/rtlwifi/pci.c
+++ b/drivers/net/wireless/rtlwifi/pci.c
@@ -1509,10 +1509,10 @@ static int rtl_pci_tx(struct ieee80211_hw *hw,
 
 	if (rtlpriv->use_new_trx_flow) {
 		rtlpriv->cfg->ops->set_desc(hw, (u8 *)pdesc, true,
-					    HW_DESC_OWN, (u8 *)&hw_queue);
+					    HW_DESC_OWN, &hw_queue);
 	} else {
 		rtlpriv->cfg->ops->set_desc(hw, (u8 *)pdesc, true,
-					    HW_DESC_OWN, (u8 *)&temp_one);
+					    HW_DESC_OWN, &temp_one);
 	}
 
 	if ((ring->entries - skb_queue_len(&ring->queue)) < 2 &&
diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/hw.c b/drivers/net/wireless/rtlwifi/rtl8188ee/hw.c
index bd2a26bafb69..5a30e4e551a9 100644
--- a/drivers/net/wireless/rtlwifi/rtl8188ee/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8188ee/hw.c
@@ -1828,7 +1828,7 @@ static void _rtl88ee_read_adapter_info(struct ieee80211_hw *hw)
 	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
 		 "EEPROM SMID = 0x%4x\n", rtlefuse->eeprom_smid);
 	/*customer ID*/
-	rtlefuse->eeprom_oemid = *(u8 *)&hwinfo[EEPROM_CUSTOMER_ID];
+	rtlefuse->eeprom_oemid = hwinfo[EEPROM_CUSTOMER_ID];
 	if (rtlefuse->eeprom_oemid == 0xFF)
 		rtlefuse->eeprom_oemid = 0;
 
@@ -1845,7 +1845,7 @@ static void _rtl88ee_read_adapter_info(struct ieee80211_hw *hw)
 	RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG,
 		 "dev_addr: %pM\n", rtlefuse->dev_addr);
 	/*channel plan */
-	rtlefuse->eeprom_channelplan = *(u8 *)&hwinfo[EEPROM_CHANNELPLAN];
+	rtlefuse->eeprom_channelplan = hwinfo[EEPROM_CHANNELPLAN];
 	/* set channel paln to world wide 13 */
 	rtlefuse->channel_plan = COUNTRY_CODE_WORLD_WIDE_13;
 	/*tx power*/
@@ -1857,7 +1857,7 @@ static void _rtl88ee_read_adapter_info(struct ieee80211_hw *hw)
 						 rtlefuse->autoload_failflag,
 						 hwinfo);
 	/*board type*/
-	rtlefuse->board_type = (((*(u8 *)&hwinfo[jj]) & 0xE0) >> 5);
+	rtlefuse->board_type = (hwinfo[jj] & 0xE0) >> 5;
 	/*Wake on wlan*/
 	rtlefuse->wowlan_enable = ((hwinfo[kk] & 0x40) >> 6);
 	/*parse xtal*/
@@ -2223,8 +2223,7 @@ void rtl88ee_update_channel_access_setting(struct ieee80211_hw *hw)
 	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
 	u16 sifs_timer;
 
-	rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SLOT_TIME,
-				      (u8 *)&mac->slot_time);
+	rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SLOT_TIME, &mac->slot_time);
 	if (!mac->ht_enable)
 		sifs_timer = 0x0a0a;
 	else
diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c b/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c
index f4c9852d1e1e..dd383b1482e9 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c
@@ -1628,10 +1628,10 @@ static void _rtl8723ae_read_adapter_info(struct ieee80211_hw *hw,
 	rtl8723ae_read_bt_coexist_info_from_hwpg(hw,
 			rtlefuse->autoload_failflag, hwinfo);
 
-	rtlefuse->eeprom_channelplan = *(u8 *)&hwinfo[EEPROM_CHANNELPLAN];
+	rtlefuse->eeprom_channelplan = hwinfo[EEPROM_CHANNELPLAN];
 	rtlefuse->eeprom_version = *(u16 *)&hwinfo[EEPROM_VERSION];
 	rtlefuse->txpwr_fromeprom = true;
-	rtlefuse->eeprom_oemid = *(u8 *)&hwinfo[EEPROM_CUSTOMER_ID];
+	rtlefuse->eeprom_oemid = hwinfo[EEPROM_CUSTOMER_ID];
 
 	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
 		 "EEPROM Customer ID: 0x%2x\n", rtlefuse->eeprom_oemid);
@@ -2051,8 +2051,7 @@ void rtl8723ae_update_channel_access_setting(struct ieee80211_hw *hw)
 	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
 	u16 sifs_timer;
 
-	rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SLOT_TIME,
-				      (u8 *)&mac->slot_time);
+	rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SLOT_TIME, &mac->slot_time);
 	if (!mac->ht_enable)
 		sifs_timer = 0x0a0a;
 	else
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/hw.c b/drivers/net/wireless/rtlwifi/rtl8723be/hw.c
index 7e70c7108d91..223728ddc82a 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723be/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/hw.c
@@ -1783,10 +1783,10 @@ static void _rtl8723be_read_adapter_info(struct ieee80211_hw *hw,
 						 rtlefuse->autoload_failflag,
 						 hwinfo);
 
-	rtlefuse->eeprom_channelplan = *(u8 *)&hwinfo[EEPROM_CHANNELPLAN];
+	rtlefuse->eeprom_channelplan = hwinfo[EEPROM_CHANNELPLAN];
 	rtlefuse->eeprom_version = *(u16 *)&hwinfo[EEPROM_VERSION];
 	rtlefuse->txpwr_fromeprom = true;
-	rtlefuse->eeprom_oemid = *(u8 *)&hwinfo[EEPROM_CUSTOMER_ID];
+	rtlefuse->eeprom_oemid = hwinfo[EEPROM_CUSTOMER_ID];
 
 	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
 		 "EEPROM Customer ID: 0x%2x\n", rtlefuse->eeprom_oemid);
@@ -2252,8 +2252,7 @@ void rtl8723be_update_channel_access_setting(struct ieee80211_hw *hw)
 	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
 	u16 sifs_timer;
 
-	rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SLOT_TIME,
-				      (u8 *)&mac->slot_time);
+	rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SLOT_TIME, &mac->slot_time);
 	if (!mac->ht_enable)
 		sifs_timer = 0x0a0a;
 	else
-- 
cgit v1.2.2


From 8986992de4225871d171e8bdd82abd0eeab978ff Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Mon, 24 Mar 2014 13:15:38 -0700
Subject: carl9170: Remove casts of pointer to same type

Casting a pointer to a pointer of the same type is pointless,
so remove these unnecessary casts.

Done via coccinelle script:

$ cat typecast_2.cocci
@@
type T;
T *foo;
@@

-	(T *)foo
+	foo

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/carl9170/rx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/carl9170/rx.c b/drivers/net/wireless/ath/carl9170/rx.c
index 536bc46a2912..924135b8e575 100644
--- a/drivers/net/wireless/ath/carl9170/rx.c
+++ b/drivers/net/wireless/ath/carl9170/rx.c
@@ -572,7 +572,7 @@ static void carl9170_ps_beacon(struct ar9170 *ar, void *data, unsigned int len)
 
 static void carl9170_ba_check(struct ar9170 *ar, void *data, unsigned int len)
 {
-	struct ieee80211_bar *bar = (void *) data;
+	struct ieee80211_bar *bar = data;
 	struct carl9170_bar_list_entry *entry;
 	unsigned int queue;
 
-- 
cgit v1.2.2


From 45d18c562adefe9d807c0ba833affdeff68bad98 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Mon, 24 Mar 2014 13:15:39 -0700
Subject: mwifiex: Remove casts of pointer to same type

Casting a pointer to a pointer of the same type is pointless,
so remove these unnecessary casts.

Done via coccinelle script:

$ cat typecast_2.cocci
@@
type T;
T *foo;
@@

-	(T *)foo
+	foo

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/pcie.c | 6 +++---
 drivers/net/wireless/mwifiex/scan.c | 2 +-
 drivers/net/wireless/mwifiex/tdls.c | 6 +++---
 3 files changed, 7 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/pcie.c b/drivers/net/wireless/mwifiex/pcie.c
index 57c353a94b29..7614a42f9c36 100644
--- a/drivers/net/wireless/mwifiex/pcie.c
+++ b/drivers/net/wireless/mwifiex/pcie.c
@@ -1033,7 +1033,7 @@ static int mwifiex_pcie_send_data_complete(struct mwifiex_adapter *adapter)
 		card->tx_buf_list[wrdoneidx] = NULL;
 
 		if (reg->pfu_enabled) {
-			desc2 = (void *)card->txbd_ring[wrdoneidx];
+			desc2 = card->txbd_ring[wrdoneidx];
 			memset(desc2, 0, sizeof(*desc2));
 		} else {
 			desc = card->txbd_ring[wrdoneidx];
@@ -1118,7 +1118,7 @@ mwifiex_pcie_send_data(struct mwifiex_adapter *adapter, struct sk_buff *skb,
 		card->tx_buf_list[wrindx] = skb;
 
 		if (reg->pfu_enabled) {
-			desc2 = (void *)card->txbd_ring[wrindx];
+			desc2 = card->txbd_ring[wrindx];
 			desc2->paddr = buf_pa;
 			desc2->len = (u16)skb->len;
 			desc2->frag_len = (u16)skb->len;
@@ -1278,7 +1278,7 @@ static int mwifiex_pcie_process_recv_data(struct mwifiex_adapter *adapter)
 		card->rx_buf_list[rd_index] = skb_tmp;
 
 		if (reg->pfu_enabled) {
-			desc2 = (void *)card->rxbd_ring[rd_index];
+			desc2 = card->rxbd_ring[rd_index];
 			desc2->paddr = buf_pa;
 			desc2->len = skb_tmp->len;
 			desc2->frag_len = skb_tmp->len;
diff --git a/drivers/net/wireless/mwifiex/scan.c b/drivers/net/wireless/mwifiex/scan.c
index 0e8ca7bab3e7..4e6e75c2de0c 100644
--- a/drivers/net/wireless/mwifiex/scan.c
+++ b/drivers/net/wireless/mwifiex/scan.c
@@ -1653,7 +1653,7 @@ mwifiex_parse_single_response_buf(struct mwifiex_private *priv, u8 **bss_info,
 	curr_bcn_bytes -= ETH_ALEN;
 
 	if (!ext_scan) {
-		rssi = (s32) *(u8 *)current_ptr;
+		rssi = (s32) *current_ptr;
 		rssi = (-rssi) * 100;		/* Convert dBm to mBm */
 		current_ptr += sizeof(u8);
 		curr_bcn_bytes -= sizeof(u8);
diff --git a/drivers/net/wireless/mwifiex/tdls.c b/drivers/net/wireless/mwifiex/tdls.c
index 8cec6e4ba8c4..97662a1ba58c 100644
--- a/drivers/net/wireless/mwifiex/tdls.c
+++ b/drivers/net/wireless/mwifiex/tdls.c
@@ -730,13 +730,13 @@ void mwifiex_process_tdls_action_frame(struct mwifiex_private *priv,
 
 	if (len < (sizeof(struct ethhdr) + 3))
 		return;
-	if (*(u8 *)(buf + sizeof(struct ethhdr)) != WLAN_TDLS_SNAP_RFTYPE)
+	if (*(buf + sizeof(struct ethhdr)) != WLAN_TDLS_SNAP_RFTYPE)
 		return;
-	if (*(u8 *)(buf + sizeof(struct ethhdr) + 1) != WLAN_CATEGORY_TDLS)
+	if (*(buf + sizeof(struct ethhdr) + 1) != WLAN_CATEGORY_TDLS)
 		return;
 
 	peer = buf + ETH_ALEN;
-	action = *(u8 *)(buf + sizeof(struct ethhdr) + 2);
+	action = *(buf + sizeof(struct ethhdr) + 2);
 
 	/* just handle TDLS setup request/response/confirm */
 	if (action > WLAN_TDLS_SETUP_CONFIRM)
-- 
cgit v1.2.2


From 1851cb4a0f08ba0600103203c4b52e53c744f59c Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Mon, 24 Mar 2014 13:15:40 -0700
Subject: rtlwifi: Remove casts of pointer to same type

Casting a pointer to a pointer of the same type is pointless,
so remove these unnecessary casts.

Around these changes:

o Remove unnecessary parentheses
o Use consistent dereference style (change ptr[0] to *ptr)
o Argument alignment

Done via coccinelle script: (and some typing)

$ cat typecast_2.cocci
@@
type T;
T *foo;
@@

-	(T *)foo
+	foo

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtlwifi/core.c                |  2 +-
 drivers/net/wireless/rtlwifi/ps.c                  | 19 ++++---
 drivers/net/wireless/rtlwifi/rtl8188ee/dm.c        |  5 +-
 drivers/net/wireless/rtlwifi/rtl8188ee/fw.c        |  4 +-
 drivers/net/wireless/rtlwifi/rtl8188ee/hw.c        | 57 ++++++++++----------
 drivers/net/wireless/rtlwifi/rtl8188ee/trx.c       |  4 +-
 drivers/net/wireless/rtlwifi/rtl8192ce/hw.c        | 14 ++---
 drivers/net/wireless/rtlwifi/rtl8192se/hw.c        | 14 +++--
 drivers/net/wireless/rtlwifi/rtl8723ae/dm.c        |  5 +-
 drivers/net/wireless/rtlwifi/rtl8723ae/hw.c        | 60 ++++++++++------------
 drivers/net/wireless/rtlwifi/rtl8723ae/trx.c       |  4 +-
 drivers/net/wireless/rtlwifi/rtl8723be/dm.c        |  2 +-
 drivers/net/wireless/rtlwifi/rtl8723be/hw.c        | 57 ++++++++++----------
 drivers/net/wireless/rtlwifi/rtl8723be/trx.c       |  4 +-
 .../net/wireless/rtlwifi/rtl8723com/fw_common.c    |  4 +-
 15 files changed, 118 insertions(+), 137 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtlwifi/core.c b/drivers/net/wireless/rtlwifi/core.c
index ded691f76f2f..4ec424f26672 100644
--- a/drivers/net/wireless/rtlwifi/core.c
+++ b/drivers/net/wireless/rtlwifi/core.c
@@ -982,7 +982,7 @@ static void rtl_op_bss_info_changed(struct ieee80211_hw *hw,
 				u8 keep_alive = 10;
 				rtlpriv->cfg->ops->set_hw_reg(hw,
 						 HW_VAR_KEEP_ALIVE,
-						 (u8 *)(&keep_alive));
+						 &keep_alive);
 
 				rtlpriv->cfg->ops->set_hw_reg(hw,
 						      HW_VAR_H2C_FW_JOINBSSRPT,
diff --git a/drivers/net/wireless/rtlwifi/ps.c b/drivers/net/wireless/rtlwifi/ps.c
index de7f05f848ef..50504942ded1 100644
--- a/drivers/net/wireless/rtlwifi/ps.c
+++ b/drivers/net/wireless/rtlwifi/ps.c
@@ -759,7 +759,7 @@ static void rtl_p2p_noa_ie(struct ieee80211_hw *hw, void *data,
 			   unsigned int len)
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
-	struct ieee80211_mgmt *mgmt = (void *)data;
+	struct ieee80211_mgmt *mgmt = data;
 	struct rtl_p2p_ps_info *p2pinfo = &(rtlpriv->psc.p2p_ps_info);
 	u8 *pos, *end, *ie;
 	u16 noa_len;
@@ -858,7 +858,7 @@ static void rtl_p2p_action_ie(struct ieee80211_hw *hw, void *data,
 			      unsigned int len)
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
-	struct ieee80211_mgmt *mgmt = (void *)data;
+	struct ieee80211_mgmt *mgmt = data;
 	struct rtl_p2p_ps_info *p2pinfo = &(rtlpriv->psc.p2p_ps_info);
 	u8 noa_num, index, i, noa_index = 0;
 	u8 *pos, *end, *ie;
@@ -950,9 +950,8 @@ void rtl_p2p_ps_cmd(struct ieee80211_hw *hw, u8 p2p_ps_state)
 	switch (p2p_ps_state) {
 	case P2P_PS_DISABLE:
 		p2pinfo->p2p_ps_state = p2p_ps_state;
-		rtlpriv->cfg->ops->set_hw_reg(hw,
-				 HW_VAR_H2C_FW_P2P_PS_OFFLOAD,
-				 (u8 *)(&p2p_ps_state));
+		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_H2C_FW_P2P_PS_OFFLOAD,
+					      &p2p_ps_state);
 
 		p2pinfo->noa_index = 0;
 		p2pinfo->ctwindow = 0;
@@ -964,7 +963,7 @@ void rtl_p2p_ps_cmd(struct ieee80211_hw *hw, u8 p2p_ps_state)
 				rtlps->smart_ps = 2;
 				rtlpriv->cfg->ops->set_hw_reg(hw,
 					 HW_VAR_H2C_FW_PWRMODE,
-					 (u8 *)(&rtlps->pwr_mode));
+					 &rtlps->pwr_mode);
 			}
 		}
 		break;
@@ -977,12 +976,12 @@ void rtl_p2p_ps_cmd(struct ieee80211_hw *hw, u8 p2p_ps_state)
 					rtlps->smart_ps = 0;
 					rtlpriv->cfg->ops->set_hw_reg(hw,
 						 HW_VAR_H2C_FW_PWRMODE,
-						 (u8 *)(&rtlps->pwr_mode));
+						 &rtlps->pwr_mode);
 				}
 			}
 			rtlpriv->cfg->ops->set_hw_reg(hw,
 				 HW_VAR_H2C_FW_P2P_PS_OFFLOAD,
-				 (u8 *)(&p2p_ps_state));
+				 &p2p_ps_state);
 		}
 		break;
 	case P2P_PS_SCAN:
@@ -992,7 +991,7 @@ void rtl_p2p_ps_cmd(struct ieee80211_hw *hw, u8 p2p_ps_state)
 			p2pinfo->p2p_ps_state = p2p_ps_state;
 			rtlpriv->cfg->ops->set_hw_reg(hw,
 				 HW_VAR_H2C_FW_P2P_PS_OFFLOAD,
-				 (u8 *)(&p2p_ps_state));
+				 &p2p_ps_state);
 		}
 		break;
 	default:
@@ -1012,7 +1011,7 @@ void rtl_p2p_info(struct ieee80211_hw *hw, void *data, unsigned int len)
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
 	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
-	struct ieee80211_hdr *hdr = (void *)data;
+	struct ieee80211_hdr *hdr = data;
 
 	if (!mac->p2p)
 		return;
diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/dm.c b/drivers/net/wireless/rtlwifi/rtl8188ee/dm.c
index 97bc9aa5e1d1..f8daa61cf1c3 100644
--- a/drivers/net/wireless/rtlwifi/rtl8188ee/dm.c
+++ b/drivers/net/wireless/rtlwifi/rtl8188ee/dm.c
@@ -851,9 +851,8 @@ static void rtl88e_dm_check_edca_turbo(struct ieee80211_hw *hw)
 	} else {
 		if (rtlpriv->dm.current_turbo_edca) {
 			u8 tmp = AC0_BE;
-			rtlpriv->cfg->ops->set_hw_reg(hw,
-						      HW_VAR_AC_PARAM,
-						      (u8 *)(&tmp));
+			rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_AC_PARAM,
+						      &tmp);
 			rtlpriv->dm.current_turbo_edca = false;
 		}
 	}
diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/fw.c b/drivers/net/wireless/rtlwifi/rtl8188ee/fw.c
index 557bc5b8327e..4f9376ad4739 100644
--- a/drivers/net/wireless/rtlwifi/rtl8188ee/fw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8188ee/fw.c
@@ -119,7 +119,7 @@ static void _rtl88e_write_fw(struct ieee80211_hw *hw,
 			     enum version_8188e version, u8 *buffer, u32 size)
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
-	u8 *buf_ptr = (u8 *)buffer;
+	u8 *buf_ptr = buffer;
 	u32 page_no, remain;
 	u32 page, offset;
 
@@ -213,7 +213,7 @@ int rtl88e_download_fw(struct ieee80211_hw *hw, bool buse_wake_on_wlan_fw)
 		return 1;
 
 	pfwheader = (struct rtl92c_firmware_header *)rtlhal->pfirmware;
-	pfwdata = (u8 *)rtlhal->pfirmware;
+	pfwdata = rtlhal->pfirmware;
 	fwsize = rtlhal->fwsize;
 	RT_TRACE(rtlpriv, COMP_FW, DBG_DMESG,
 		 "normal Firmware SIZE %d\n", fwsize);
diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/hw.c b/drivers/net/wireless/rtlwifi/rtl8188ee/hw.c
index 5a30e4e551a9..94cd9df98381 100644
--- a/drivers/net/wireless/rtlwifi/rtl8188ee/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8188ee/hw.c
@@ -147,8 +147,7 @@ static void _rtl88ee_set_fw_clock_on(struct ieee80211_hw *hw,
 	}
 
 	if (IS_IN_LOW_POWER_STATE_88E(rtlhal->fw_ps_state)) {
-		rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_SET_RPWM,
-					      (u8 *)(&rpwm_val));
+		rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_SET_RPWM, &rpwm_val);
 		if (FW_PS_IS_ACK(rpwm_val)) {
 			isr_regaddr = REG_HISR;
 			content = rtl_read_dword(rtlpriv, isr_regaddr);
@@ -225,7 +224,7 @@ static void _rtl88ee_set_fw_clock_off(struct ieee80211_hw *hw,
 			rtlhal->fw_ps_state = FW_PS_STATE(rpwm_val);
 			rtl_write_word(rtlpriv, REG_HISR, 0x0100);
 			rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SET_RPWM,
-						      (u8 *)(&rpwm_val));
+						      &rpwm_val);
 			spin_lock_bh(&rtlpriv->locks.fw_ps_lock);
 			rtlhal->fw_clk_change_in_progress = false;
 			spin_unlock_bh(&rtlpriv->locks.fw_ps_lock);
@@ -273,15 +272,14 @@ static void _rtl88ee_fwlps_leave(struct ieee80211_hw *hw)
 		_rtl88ee_set_fw_clock_on(hw, rpwm_val, false);
 		rtlhal->allow_sw_to_change_hwclc = false;
 		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_H2C_FW_PWRMODE,
-					      (u8 *)(&fw_pwrmode));
+					      &fw_pwrmode);
 		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_FW_PSMODE_STATUS,
 					      (u8 *)(&fw_current_inps));
 	} else {
 		rpwm_val = FW_PS_STATE_ALL_ON_88E;	/* RF on */
-		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SET_RPWM,
-					      (u8 *)(&rpwm_val));
+		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SET_RPWM, &rpwm_val);
 		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_H2C_FW_PWRMODE,
-					      (u8 *)(&fw_pwrmode));
+					      &fw_pwrmode);
 		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_FW_PSMODE_STATUS,
 					      (u8 *)(&fw_current_inps));
 	}
@@ -300,7 +298,7 @@ static void _rtl88ee_fwlps_enter(struct ieee80211_hw *hw)
 		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_FW_PSMODE_STATUS,
 					      (u8 *)(&fw_current_inps));
 		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_H2C_FW_PWRMODE,
-					      (u8 *)(&ppsc->fwctrl_psmode));
+					      &ppsc->fwctrl_psmode);
 		rtlhal->allow_sw_to_change_hwclc = true;
 		_rtl88ee_set_fw_clock_off(hw, rpwm_val);
 	} else {
@@ -308,9 +306,8 @@ static void _rtl88ee_fwlps_enter(struct ieee80211_hw *hw)
 		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_FW_PSMODE_STATUS,
 					      (u8 *)(&fw_current_inps));
 		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_H2C_FW_PWRMODE,
-					      (u8 *)(&ppsc->fwctrl_psmode));
-		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SET_RPWM,
-					      (u8 *)(&rpwm_val));
+					      &ppsc->fwctrl_psmode);
+		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SET_RPWM, &rpwm_val);
 	}
 }
 
@@ -419,12 +416,12 @@ void rtl88ee_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 
 		for (e_aci = 0; e_aci < AC_MAX; e_aci++) {
 			rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_AC_PARAM,
-						      (u8 *)(&e_aci));
+						      &e_aci);
 		}
 		break; }
 	case HW_VAR_ACK_PREAMBLE:{
 		u8 reg_tmp;
-		u8 short_preamble = (bool) (*(u8 *)val);
+		u8 short_preamble = (bool)*val;
 		reg_tmp = rtl_read_byte(rtlpriv, REG_TRXPTCL_CTL+2);
 		if (short_preamble) {
 			reg_tmp |= 0x02;
@@ -435,13 +432,13 @@ void rtl88ee_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 		}
 		break; }
 	case HW_VAR_WPA_CONFIG:
-		rtl_write_byte(rtlpriv, REG_SECCFG, *((u8 *)val));
+		rtl_write_byte(rtlpriv, REG_SECCFG, *val);
 		break;
 	case HW_VAR_AMPDU_MIN_SPACE:{
 		u8 min_spacing_to_set;
 		u8 sec_min_space;
 
-		min_spacing_to_set = *((u8 *)val);
+		min_spacing_to_set = *val;
 		if (min_spacing_to_set <= 7) {
 			sec_min_space = 0;
 
@@ -464,7 +461,7 @@ void rtl88ee_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 	case HW_VAR_SHORTGI_DENSITY:{
 		u8 density_to_set;
 
-		density_to_set = *((u8 *)val);
+		density_to_set = *val;
 		mac->min_space_cfg |= (density_to_set << 3);
 
 		RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
@@ -482,7 +479,7 @@ void rtl88ee_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 
 		reg = regtoset_normal;
 
-		factor = *((u8 *)val);
+		factor = *val;
 		if (factor <= 3) {
 			factor = (1 << (factor + 2));
 			if (factor > 0xf)
@@ -505,15 +502,15 @@ void rtl88ee_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 		}
 		break; }
 	case HW_VAR_AC_PARAM:{
-		u8 e_aci = *((u8 *)val);
+		u8 e_aci = *val;
 		rtl88e_dm_init_edca_turbo(hw);
 
 		if (rtlpci->acm_method != EACMWAY2_SW)
 			rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_ACM_CTRL,
-						      (u8 *)(&e_aci));
+						      &e_aci);
 		break; }
 	case HW_VAR_ACM_CTRL:{
-		u8 e_aci = *((u8 *)val);
+		u8 e_aci = *val;
 		union aci_aifsn *p_aci_aifsn =
 		    (union aci_aifsn *)(&(mac->ac[0].aifs));
 		u8 acm = p_aci_aifsn->f.acm;
@@ -566,7 +563,7 @@ void rtl88ee_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 		rtlpci->receive_config = ((u32 *)(val))[0];
 		break;
 	case HW_VAR_RETRY_LIMIT:{
-		u8 retry_limit = ((u8 *)(val))[0];
+		u8 retry_limit = *val;
 
 		rtl_write_word(rtlpriv, REG_RL,
 			       retry_limit << RETRY_LIMIT_SHORT_SHIFT |
@@ -579,7 +576,7 @@ void rtl88ee_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 		rtlefuse->efuse_usedbytes = *((u16 *)val);
 		break;
 	case HW_VAR_EFUSE_USAGE:
-		rtlefuse->efuse_usedpercentage = *((u8 *)val);
+		rtlefuse->efuse_usedpercentage = *val;
 		break;
 	case HW_VAR_IO_CMD:
 		rtl88e_phy_set_io_cmd(hw, (*(enum io_type *)val));
@@ -591,15 +588,13 @@ void rtl88ee_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 		udelay(1);
 
 		if (rpwm_val & BIT(7)) {
-			rtl_write_byte(rtlpriv, REG_PCIE_HRPWM,
-				       (*(u8 *)val));
+			rtl_write_byte(rtlpriv, REG_PCIE_HRPWM, *val);
 		} else {
-			rtl_write_byte(rtlpriv, REG_PCIE_HRPWM,
-				       ((*(u8 *)val) | BIT(7)));
+			rtl_write_byte(rtlpriv, REG_PCIE_HRPWM, *val | BIT(7));
 		}
 		break; }
 	case HW_VAR_H2C_FW_PWRMODE:
-		rtl88e_set_fw_pwrmode_cmd(hw, (*(u8 *)val));
+		rtl88e_set_fw_pwrmode_cmd(hw, *val);
 		break;
 	case HW_VAR_FW_PSMODE_STATUS:
 		ppsc->fw_current_inpsmode = *((bool *)val);
@@ -616,7 +611,7 @@ void rtl88ee_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 			_rtl88ee_fwlps_leave(hw);
 		 break; }
 	case HW_VAR_H2C_FW_JOINBSSRPT:{
-		u8 mstatus = (*(u8 *)val);
+		u8 mstatus = *val;
 		u8 tmp, tmp_reg422, uval;
 		u8 count = 0, dlbcn_count = 0;
 		bool recover = false;
@@ -667,10 +662,10 @@ void rtl88ee_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 			}
 			rtl_write_byte(rtlpriv, REG_CR + 1, (tmp & ~(BIT(0))));
 		}
-		rtl88e_set_fw_joinbss_report_cmd(hw, (*(u8 *)val));
+		rtl88e_set_fw_joinbss_report_cmd(hw, *val);
 		break; }
 	case HW_VAR_H2C_FW_P2P_PS_OFFLOAD:
-		rtl88e_set_p2p_ps_offload_cmd(hw, (*(u8 *)val));
+		rtl88e_set_p2p_ps_offload_cmd(hw, *val);
 		break;
 	case HW_VAR_AID:{
 		u16 u2btmp;
@@ -680,7 +675,7 @@ void rtl88ee_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 			       mac->assoc_id));
 		break; }
 	case HW_VAR_CORRECT_TSF:{
-		u8 btype_ibss = ((u8 *)(val))[0];
+		u8 btype_ibss = *val;
 
 		if (btype_ibss == true)
 			_rtl88ee_stop_tx_beacon(hw);
diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/trx.c b/drivers/net/wireless/rtlwifi/rtl8188ee/trx.c
index 2ba6f510d884..06ef47cd6203 100644
--- a/drivers/net/wireless/rtlwifi/rtl8188ee/trx.c
+++ b/drivers/net/wireless/rtlwifi/rtl8188ee/trx.c
@@ -497,7 +497,7 @@ void rtl88ee_tx_fill_desc(struct ieee80211_hw *hw,
 	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
 	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
 	struct rtl_hal *rtlhal = rtl_hal(rtlpriv);
-	u8 *pdesc = (u8 *)pdesc_tx;
+	u8 *pdesc = pdesc_tx;
 	u16 seq_number;
 	__le16 fc = hdr->frame_control;
 	unsigned int buf_len = 0;
@@ -716,7 +716,7 @@ void rtl88ee_tx_fill_cmddesc(struct ieee80211_hw *hw,
 
 	SET_TX_DESC_OWN(pdesc, 1);
 
-	SET_TX_DESC_PKT_SIZE((u8 *)pdesc, (u16)(skb->len));
+	SET_TX_DESC_PKT_SIZE(pdesc, (u16)(skb->len));
 
 	SET_TX_DESC_FIRST_SEG(pdesc, 1);
 	SET_TX_DESC_LAST_SEG(pdesc, 1);
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c
index 4ae51d5b436f..55adf043aef7 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c
@@ -476,7 +476,7 @@ void rtl92ce_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 			break;
 		}
 	case HW_VAR_H2C_FW_P2P_PS_OFFLOAD:
-		rtl92c_set_p2p_ps_offload_cmd(hw, (*(u8 *)val));
+		rtl92c_set_p2p_ps_offload_cmd(hw, *val);
 		break;
 	case HW_VAR_AID:{
 			u16 u2btmp;
@@ -521,21 +521,21 @@ void rtl92ce_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 						(u8 *)(&fw_current_inps));
 				rtlpriv->cfg->ops->set_hw_reg(hw,
 						HW_VAR_H2C_FW_PWRMODE,
-						(u8 *)(&ppsc->fwctrl_psmode));
+						&ppsc->fwctrl_psmode);
 
 				rtlpriv->cfg->ops->set_hw_reg(hw,
-						HW_VAR_SET_RPWM,
-						(u8 *)(&rpwm_val));
+							      HW_VAR_SET_RPWM,
+							      &rpwm_val);
 			} else {
 				rpwm_val = 0x0C;	/* RF on */
 				fw_pwrmode = FW_PS_ACTIVE_MODE;
 				fw_current_inps = false;
 				rtlpriv->cfg->ops->set_hw_reg(hw,
-						HW_VAR_SET_RPWM,
-						(u8 *)(&rpwm_val));
+							      HW_VAR_SET_RPWM,
+							      &rpwm_val);
 				rtlpriv->cfg->ops->set_hw_reg(hw,
 						HW_VAR_H2C_FW_PWRMODE,
-						(u8 *)(&fw_pwrmode));
+						&fw_pwrmode);
 
 				rtlpriv->cfg->ops->set_hw_reg(hw,
 						HW_VAR_FW_PSMODE_STATUS,
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/hw.c b/drivers/net/wireless/rtlwifi/rtl8192se/hw.c
index 3015af167b2b..9098558d916d 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192se/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/hw.c
@@ -413,20 +413,18 @@ void rtl92se_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 					(u8 *)(&fw_current_inps));
 			rtlpriv->cfg->ops->set_hw_reg(hw,
 					HW_VAR_H2C_FW_PWRMODE,
-					(u8 *)(&ppsc->fwctrl_psmode));
+					&ppsc->fwctrl_psmode);
 
-			rtlpriv->cfg->ops->set_hw_reg(hw,
-					HW_VAR_SET_RPWM,
-					(u8 *)(&rpwm_val));
+			rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SET_RPWM,
+						      &rpwm_val);
 		} else {
 			rpwm_val = 0x0C;	/* RF on */
 			fw_pwrmode = FW_PS_ACTIVE_MODE;
 			fw_current_inps = false;
 			rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SET_RPWM,
-					(u8 *)(&rpwm_val));
-			rtlpriv->cfg->ops->set_hw_reg(hw,
-					HW_VAR_H2C_FW_PWRMODE,
-					(u8 *)(&fw_pwrmode));
+						      &rpwm_val);
+			rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_H2C_FW_PWRMODE,
+						      &fw_pwrmode);
 
 			rtlpriv->cfg->ops->set_hw_reg(hw,
 					HW_VAR_FW_PSMODE_STATUS,
diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/dm.c b/drivers/net/wireless/rtlwifi/rtl8723ae/dm.c
index 863ddb3e2888..25cc83058b01 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723ae/dm.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723ae/dm.c
@@ -647,9 +647,8 @@ static void rtl8723ae_dm_check_edca_turbo(struct ieee80211_hw *hw)
 	} else {
 		if (rtlpriv->dm.current_turbo_edca) {
 			u8 tmp = AC0_BE;
-			rtlpriv->cfg->ops->set_hw_reg(hw,
-						      HW_VAR_AC_PARAM,
-						      (u8 *) (&tmp));
+			rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_AC_PARAM,
+						      &tmp);
 			rtlpriv->dm.current_turbo_edca = false;
 		}
 	}
diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c b/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c
index dd383b1482e9..65c9e80e1f78 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c
@@ -207,14 +207,13 @@ void rtl8723ae_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 		rtl_write_byte(rtlpriv, REG_SLOT, val[0]);
 
 		for (e_aci = 0; e_aci < AC_MAX; e_aci++) {
-			rtlpriv->cfg->ops->set_hw_reg(hw,
-						      HW_VAR_AC_PARAM,
-						      (u8 *) (&e_aci));
+			rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_AC_PARAM,
+						      &e_aci);
 		}
 		break; }
 	case HW_VAR_ACK_PREAMBLE:{
 		u8 reg_tmp;
-		u8 short_preamble = (bool) (*(u8 *) val);
+		u8 short_preamble = (bool)*val;
 		reg_tmp = (mac->cur_40_prime_sc) << 5;
 		if (short_preamble)
 			reg_tmp |= 0x80;
@@ -225,7 +224,7 @@ void rtl8723ae_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 		u8 min_spacing_to_set;
 		u8 sec_min_space;
 
-		min_spacing_to_set = *((u8 *) val);
+		min_spacing_to_set = *val;
 		if (min_spacing_to_set <= 7) {
 			sec_min_space = 0;
 
@@ -249,7 +248,7 @@ void rtl8723ae_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 	case HW_VAR_SHORTGI_DENSITY:{
 		u8 density_to_set;
 
-		density_to_set = *((u8 *) val);
+		density_to_set = *val;
 		mac->min_space_cfg |= (density_to_set << 3);
 
 		RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
@@ -273,7 +272,7 @@ void rtl8723ae_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 		else
 			p_regtoset = regtoset_normal;
 
-		factor_toset = *((u8 *) val);
+		factor_toset = *val;
 		if (factor_toset <= 3) {
 			factor_toset = (1 << (factor_toset + 2));
 			if (factor_toset > 0xf)
@@ -304,16 +303,15 @@ void rtl8723ae_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 		}
 		break; }
 	case HW_VAR_AC_PARAM:{
-		u8 e_aci = *((u8 *) val);
+		u8 e_aci = *val;
 		rtl8723_dm_init_edca_turbo(hw);
 
 		if (rtlpci->acm_method != EACMWAY2_SW)
-			rtlpriv->cfg->ops->set_hw_reg(hw,
-						      HW_VAR_ACM_CTRL,
-						      (u8 *) (&e_aci));
+			rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_ACM_CTRL,
+						      &e_aci);
 		break; }
 	case HW_VAR_ACM_CTRL:{
-		u8 e_aci = *((u8 *) val);
+		u8 e_aci = *val;
 		union aci_aifsn *p_aci_aifsn =
 		    (union aci_aifsn *)(&(mac->ac[0].aifs));
 		u8 acm = p_aci_aifsn->f.acm;
@@ -366,7 +364,7 @@ void rtl8723ae_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 		rtlpci->receive_config = ((u32 *) (val))[0];
 		break;
 	case HW_VAR_RETRY_LIMIT:{
-		u8 retry_limit = ((u8 *) (val))[0];
+		u8 retry_limit = *val;
 
 		rtl_write_word(rtlpriv, REG_RL,
 			       retry_limit << RETRY_LIMIT_SHORT_SHIFT |
@@ -379,13 +377,13 @@ void rtl8723ae_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 		rtlefuse->efuse_usedbytes = *((u16 *) val);
 		break;
 	case HW_VAR_EFUSE_USAGE:
-		rtlefuse->efuse_usedpercentage = *((u8 *) val);
+		rtlefuse->efuse_usedpercentage = *val;
 		break;
 	case HW_VAR_IO_CMD:
 		rtl8723ae_phy_set_io_cmd(hw, (*(enum io_type *)val));
 		break;
 	case HW_VAR_WPA_CONFIG:
-		rtl_write_byte(rtlpriv, REG_SECCFG, *((u8 *) val));
+		rtl_write_byte(rtlpriv, REG_SECCFG, *val);
 		break;
 	case HW_VAR_SET_RPWM:{
 		u8 rpwm_val;
@@ -394,27 +392,25 @@ void rtl8723ae_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 		udelay(1);
 
 		if (rpwm_val & BIT(7)) {
-			rtl_write_byte(rtlpriv, REG_PCIE_HRPWM,
-				       (*(u8 *) val));
+			rtl_write_byte(rtlpriv, REG_PCIE_HRPWM, *val);
 		} else {
-			rtl_write_byte(rtlpriv, REG_PCIE_HRPWM,
-				       ((*(u8 *) val) | BIT(7)));
+			rtl_write_byte(rtlpriv, REG_PCIE_HRPWM, *val | BIT(7));
 		}
 
 		break; }
 	case HW_VAR_H2C_FW_PWRMODE:{
-		u8 psmode = (*(u8 *) val);
+		u8 psmode = *val;
 
 		if (psmode != FW_PS_ACTIVE_MODE)
 			rtl8723ae_dm_rf_saving(hw, true);
 
-		rtl8723ae_set_fw_pwrmode_cmd(hw, (*(u8 *) val));
+		rtl8723ae_set_fw_pwrmode_cmd(hw, *val);
 		break; }
 	case HW_VAR_FW_PSMODE_STATUS:
 		ppsc->fw_current_inpsmode = *((bool *) val);
 		break;
 	case HW_VAR_H2C_FW_JOINBSSRPT:{
-		u8 mstatus = (*(u8 *) val);
+		u8 mstatus = *val;
 		u8 tmp_regcr, tmp_reg422;
 		bool recover = false;
 
@@ -447,11 +443,11 @@ void rtl8723ae_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 			rtl_write_byte(rtlpriv, REG_CR + 1,
 				       (tmp_regcr & ~(BIT(0))));
 		}
-		rtl8723ae_set_fw_joinbss_report_cmd(hw, (*(u8 *) val));
+		rtl8723ae_set_fw_joinbss_report_cmd(hw, *val);
 
 		break; }
 	case HW_VAR_H2C_FW_P2P_PS_OFFLOAD:
-		rtl8723ae_set_p2p_ps_offload_cmd(hw, (*(u8 *)val));
+		rtl8723ae_set_p2p_ps_offload_cmd(hw, *val);
 		break;
 	case HW_VAR_AID:{
 		u16 u2btmp;
@@ -461,7 +457,7 @@ void rtl8723ae_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 				mac->assoc_id));
 		break; }
 	case HW_VAR_CORRECT_TSF:{
-		u8 btype_ibss = ((u8 *) (val))[0];
+		u8 btype_ibss = *val;
 
 		if (btype_ibss == true)
 			_rtl8723ae_stop_tx_beacon(hw);
@@ -491,20 +487,18 @@ void rtl8723ae_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 					(u8 *)(&fw_current_inps));
 			rtlpriv->cfg->ops->set_hw_reg(hw,
 					HW_VAR_H2C_FW_PWRMODE,
-					(u8 *)(&ppsc->fwctrl_psmode));
+					&ppsc->fwctrl_psmode);
 
-			rtlpriv->cfg->ops->set_hw_reg(hw,
-					HW_VAR_SET_RPWM,
-					(u8 *)(&rpwm_val));
+			rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SET_RPWM,
+						      &rpwm_val);
 		} else {
 			rpwm_val = 0x0C;	/* RF on */
 			fw_pwrmode = FW_PS_ACTIVE_MODE;
 			fw_current_inps = false;
 			rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SET_RPWM,
-					(u8 *)(&rpwm_val));
-			rtlpriv->cfg->ops->set_hw_reg(hw,
-					HW_VAR_H2C_FW_PWRMODE,
-					(u8 *)(&fw_pwrmode));
+						      &rpwm_val);
+			rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_H2C_FW_PWRMODE,
+						      &fw_pwrmode);
 
 			rtlpriv->cfg->ops->set_hw_reg(hw,
 					HW_VAR_FW_PSMODE_STATUS,
diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c b/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c
index 29adf55c6fd3..10b7577b6ae5 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c
@@ -375,7 +375,7 @@ void rtl8723ae_tx_fill_desc(struct ieee80211_hw *hw,
 	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
 	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
 	bool defaultadapter = true;
-	u8 *pdesc = (u8 *) pdesc_tx;
+	u8 *pdesc = pdesc_tx;
 	u16 seq_number;
 	__le16 fc = hdr->frame_control;
 	u8 fw_qsel = _rtl8723ae_map_hwqueue_to_fwqueue(skb, hw_queue);
@@ -577,7 +577,7 @@ void rtl8723ae_tx_fill_cmddesc(struct ieee80211_hw *hw,
 
 	SET_TX_DESC_OWN(pdesc, 1);
 
-	SET_TX_DESC_PKT_SIZE((u8 *) pdesc, (u16) (skb->len));
+	SET_TX_DESC_PKT_SIZE(pdesc, (u16) (skb->len));
 
 	SET_TX_DESC_FIRST_SEG(pdesc, 1);
 	SET_TX_DESC_LAST_SEG(pdesc, 1);
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/dm.c b/drivers/net/wireless/rtlwifi/rtl8723be/dm.c
index 736bfcb7938a..13d53a1df789 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723be/dm.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/dm.c
@@ -1083,7 +1083,7 @@ static void rtl8723be_dm_check_edca_turbo(struct ieee80211_hw *hw)
 		if (rtlpriv->dm.current_turbo_edca) {
 			u8 tmp = AC0_BE;
 			rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_AC_PARAM,
-						      (u8 *)(&tmp));
+						      &tmp);
 		}
 		rtlpriv->dm.current_turbo_edca = false;
 	}
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/hw.c b/drivers/net/wireless/rtlwifi/rtl8723be/hw.c
index 223728ddc82a..0fdf0909321f 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723be/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/hw.c
@@ -147,7 +147,7 @@ static void _rtl8723be_set_fw_clock_on(struct ieee80211_hw *hw, u8 rpwm_val,
 	}
 	if (IS_IN_LOW_POWER_STATE_88E(rtlhal->fw_ps_state)) {
 		rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_SET_RPWM,
-					      (u8 *)(&rpwm_val));
+					      &rpwm_val);
 		if (FW_PS_IS_ACK(rpwm_val)) {
 			isr_regaddr = REG_HISR;
 			content = rtl_read_dword(rtlpriv, isr_regaddr);
@@ -221,7 +221,7 @@ static void _rtl8723be_set_fw_clock_off(struct ieee80211_hw *hw, u8 rpwm_val)
 			rtlhal->fw_ps_state = FW_PS_STATE(rpwm_val);
 			rtl_write_word(rtlpriv, REG_HISR, 0x0100);
 			rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SET_RPWM,
-						      (u8 *)(&rpwm_val));
+						      &rpwm_val);
 			spin_lock_bh(&rtlpriv->locks.fw_ps_lock);
 			rtlhal->fw_clk_change_in_progress = false;
 			spin_unlock_bh(&rtlpriv->locks.fw_ps_lock);
@@ -253,15 +253,14 @@ static void _rtl8723be_fwlps_leave(struct ieee80211_hw *hw)
 		_rtl8723be_set_fw_clock_on(hw, rpwm_val, false);
 		rtlhal->allow_sw_to_change_hwclc = false;
 		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_H2C_FW_PWRMODE,
-					      (u8 *)(&fw_pwrmode));
+					      &fw_pwrmode);
 		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_FW_PSMODE_STATUS,
 					      (u8 *)(&fw_current_inps));
 	} else {
 		rpwm_val = FW_PS_STATE_ALL_ON_88E;	/* RF on */
-		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SET_RPWM,
-					      (u8 *)(&rpwm_val));
+		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SET_RPWM, &rpwm_val);
 		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_H2C_FW_PWRMODE,
-					      (u8 *)(&fw_pwrmode));
+					      &fw_pwrmode);
 		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_FW_PSMODE_STATUS,
 					      (u8 *)(&fw_current_inps));
 	}
@@ -280,7 +279,7 @@ static void _rtl8723be_fwlps_enter(struct ieee80211_hw *hw)
 		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_FW_PSMODE_STATUS,
 					      (u8 *)(&fw_current_inps));
 		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_H2C_FW_PWRMODE,
-					      (u8 *)(&ppsc->fwctrl_psmode));
+					      &ppsc->fwctrl_psmode);
 		rtlhal->allow_sw_to_change_hwclc = true;
 		_rtl8723be_set_fw_clock_off(hw, rpwm_val);
 
@@ -289,9 +288,8 @@ static void _rtl8723be_fwlps_enter(struct ieee80211_hw *hw)
 		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_FW_PSMODE_STATUS,
 					      (u8 *)(&fw_current_inps));
 		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_H2C_FW_PWRMODE,
-					      (u8 *)(&ppsc->fwctrl_psmode));
-		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SET_RPWM,
-					      (u8 *)(&rpwm_val));
+					      &ppsc->fwctrl_psmode);
+		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SET_RPWM, &rpwm_val);
 	}
 }
 
@@ -400,12 +398,12 @@ void rtl8723be_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 
 		for (e_aci = 0; e_aci < AC_MAX; e_aci++) {
 			rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_AC_PARAM,
-						      (u8 *)(&e_aci));
+						      &e_aci);
 		}
 		break; }
 	case HW_VAR_ACK_PREAMBLE: {
 		u8 reg_tmp;
-		u8 short_preamble = (bool) (*(u8 *)val);
+		u8 short_preamble = (bool)*val;
 		reg_tmp = rtl_read_byte(rtlpriv, REG_TRXPTCL_CTL + 2);
 		if (short_preamble) {
 			reg_tmp |= 0x02;
@@ -416,13 +414,13 @@ void rtl8723be_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 		}
 		break; }
 	case HW_VAR_WPA_CONFIG:
-		rtl_write_byte(rtlpriv, REG_SECCFG, *((u8 *)val));
+		rtl_write_byte(rtlpriv, REG_SECCFG, *val);
 		break;
 	case HW_VAR_AMPDU_MIN_SPACE: {
 		u8 min_spacing_to_set;
 		u8 sec_min_space;
 
-		min_spacing_to_set = *((u8 *)val);
+		min_spacing_to_set = *val;
 		if (min_spacing_to_set <= 7) {
 			sec_min_space = 0;
 
@@ -445,7 +443,7 @@ void rtl8723be_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 	case HW_VAR_SHORTGI_DENSITY: {
 		u8 density_to_set;
 
-		density_to_set = *((u8 *)val);
+		density_to_set = *val;
 		mac->min_space_cfg |= (density_to_set << 3);
 
 		RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
@@ -463,7 +461,7 @@ void rtl8723be_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 
 		p_regtoset = regtoset_normal;
 
-		factor_toset = *((u8 *)val);
+		factor_toset = *val;
 		if (factor_toset <= 3) {
 			factor_toset = (1 << (factor_toset + 2));
 			if (factor_toset > 0xf)
@@ -491,15 +489,15 @@ void rtl8723be_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 		}
 		break; }
 	case HW_VAR_AC_PARAM: {
-		u8 e_aci = *((u8 *)val);
+		u8 e_aci = *val;
 		rtl8723_dm_init_edca_turbo(hw);
 
 		if (rtlpci->acm_method != EACMWAY2_SW)
 			rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_ACM_CTRL,
-						      (u8 *)(&e_aci));
+						      &e_aci);
 		break; }
 	case HW_VAR_ACM_CTRL: {
-		u8 e_aci = *((u8 *)val);
+		u8 e_aci = *val;
 		union aci_aifsn *p_aci_aifsn =
 				(union aci_aifsn *)(&(mac->ac[0].aifs));
 		u8 acm = p_aci_aifsn->f.acm;
@@ -552,7 +550,7 @@ void rtl8723be_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 		rtlpci->receive_config = ((u32 *)(val))[0];
 		break;
 	case HW_VAR_RETRY_LIMIT: {
-		u8 retry_limit = ((u8 *)(val))[0];
+		u8 retry_limit = *val;
 
 		rtl_write_word(rtlpriv, REG_RL,
 			       retry_limit << RETRY_LIMIT_SHORT_SHIFT |
@@ -565,7 +563,7 @@ void rtl8723be_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 		rtlefuse->efuse_usedbytes = *((u16 *)val);
 		break;
 	case HW_VAR_EFUSE_USAGE:
-		rtlefuse->efuse_usedpercentage = *((u8 *)val);
+		rtlefuse->efuse_usedpercentage = *val;
 		break;
 	case HW_VAR_IO_CMD:
 		rtl8723be_phy_set_io_cmd(hw, (*(enum io_type *)val));
@@ -577,14 +575,13 @@ void rtl8723be_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 		udelay(1);
 
 		if (rpwm_val & BIT(7)) {
-			rtl_write_byte(rtlpriv, REG_PCIE_HRPWM, (*(u8 *)val));
+			rtl_write_byte(rtlpriv, REG_PCIE_HRPWM, *val);
 		} else {
-			rtl_write_byte(rtlpriv, REG_PCIE_HRPWM,
-				       ((*(u8 *)val) | BIT(7)));
+			rtl_write_byte(rtlpriv, REG_PCIE_HRPWM, *val | BIT(7));
 		}
 		break; }
 	case HW_VAR_H2C_FW_PWRMODE:
-		rtl8723be_set_fw_pwrmode_cmd(hw, (*(u8 *)val));
+		rtl8723be_set_fw_pwrmode_cmd(hw, *val);
 		break;
 	case HW_VAR_FW_PSMODE_STATUS:
 		ppsc->fw_current_inpsmode = *((bool *)val);
@@ -602,7 +599,7 @@ void rtl8723be_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 
 		break; }
 	case HW_VAR_H2C_FW_JOINBSSRPT: {
-		u8 mstatus = (*(u8 *)val);
+		u8 mstatus = *val;
 		u8 tmp_regcr, tmp_reg422, bcnvalid_reg;
 		u8 count = 0, dlbcn_count = 0;
 		bool recover = false;
@@ -657,10 +654,10 @@ void rtl8723be_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 			rtl_write_byte(rtlpriv, REG_CR + 1,
 				       (tmp_regcr & ~(BIT(0))));
 		}
-		rtl8723be_set_fw_joinbss_report_cmd(hw, (*(u8 *)val));
+		rtl8723be_set_fw_joinbss_report_cmd(hw, *val);
 		break; }
 	case HW_VAR_H2C_FW_P2P_PS_OFFLOAD:
-		rtl8723be_set_p2p_ps_offload_cmd(hw, (*(u8 *)val));
+		rtl8723be_set_p2p_ps_offload_cmd(hw, *val);
 		break;
 	case HW_VAR_AID: {
 		u16 u2btmp;
@@ -670,7 +667,7 @@ void rtl8723be_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 			       (u2btmp | mac->assoc_id));
 		break; }
 	case HW_VAR_CORRECT_TSF: {
-		u8 btype_ibss = ((u8 *)(val))[0];
+		u8 btype_ibss = *val;
 
 		if (btype_ibss)
 			_rtl8723be_stop_tx_beacon(hw);
@@ -690,7 +687,7 @@ void rtl8723be_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 	case HW_VAR_KEEP_ALIVE: {
 		u8 array[2];
 		array[0] = 0xff;
-		array[1] = *((u8 *)val);
+		array[1] = *val;
 		rtl8723be_fill_h2c_cmd(hw, H2C_8723BE_KEEP_ALIVE_CTRL,
 				       2, array);
 		break; }
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/trx.c b/drivers/net/wireless/rtlwifi/rtl8723be/trx.c
index 74a75dceab08..e0a0d8c8fed5 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723be/trx.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/trx.c
@@ -647,7 +647,7 @@ void rtl8723be_tx_fill_desc(struct ieee80211_hw *hw,
 	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
 	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
 	struct rtl_hal *rtlhal = rtl_hal(rtlpriv);
-	u8 *pdesc = (u8 *)pdesc_tx;
+	u8 *pdesc = pdesc_tx;
 	u16 seq_number;
 	__le16 fc = hdr->frame_control;
 	unsigned int buf_len = 0;
@@ -850,7 +850,7 @@ void rtl8723be_tx_fill_cmddesc(struct ieee80211_hw *hw, u8 *pdesc,
 
 	SET_TX_DESC_OWN(pdesc, 1);
 
-	SET_TX_DESC_PKT_SIZE((u8 *)pdesc, (u16)(skb->len));
+	SET_TX_DESC_PKT_SIZE(pdesc, (u16)(skb->len));
 
 	SET_TX_DESC_FIRST_SEG(pdesc, 1);
 	SET_TX_DESC_LAST_SEG(pdesc, 1);
diff --git a/drivers/net/wireless/rtlwifi/rtl8723com/fw_common.c b/drivers/net/wireless/rtlwifi/rtl8723com/fw_common.c
index c12da552b7f7..540278ff462b 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723com/fw_common.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723com/fw_common.c
@@ -115,7 +115,7 @@ void rtl8723_write_fw(struct ieee80211_hw *hw,
 		      u8 *buffer, u32 size)
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
-	u8 *bufferptr = (u8 *)buffer;
+	u8 *bufferptr = buffer;
 	u32 pagenums, remainsize;
 	u32 page, offset;
 
@@ -257,7 +257,7 @@ int rtl8723_download_fw(struct ieee80211_hw *hw,
 		return 1;
 
 	pfwheader = (struct rtl92c_firmware_header *)rtlhal->pfirmware;
-	pfwdata = (u8 *)rtlhal->pfirmware;
+	pfwdata = rtlhal->pfirmware;
 	fwsize = rtlhal->fwsize;
 	RT_TRACE(rtlpriv, COMP_FW, DBG_DMESG,
 		 "normal Firmware SIZE %d\n", fwsize);
-- 
cgit v1.2.2


From 87b7e9e2f6fe7e6b401443b3dd4b64815bcaa15c Mon Sep 17 00:00:00 2001
From: Daniel Kim <dekim@broadcom.com>
Date: Tue, 25 Mar 2014 21:45:09 +0100
Subject: brcmfmac: use mfp if required from user-space

The struct cfg80211_connect_params indicate whether the connection
should use management frame protection (mfp). If required set the
MFP_CAPABLE flag in the firmware command. This is supported from
user-space by wpa_supplicant since v2.1.

Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 15 ++++++++++-----
 drivers/net/wireless/brcm80211/include/brcmu_wifi.h   |  3 +++
 2 files changed, 13 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
index e0e649aab8db..afb3d15e38ff 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
@@ -1354,13 +1354,14 @@ static s32 brcmf_set_auth_type(struct net_device *ndev,
 }
 
 static s32
-brcmf_set_set_cipher(struct net_device *ndev,
-		     struct cfg80211_connect_params *sme)
+brcmf_set_wsec_mode(struct net_device *ndev,
+		     struct cfg80211_connect_params *sme, bool mfp)
 {
 	struct brcmf_cfg80211_profile *profile = ndev_to_prof(ndev);
 	struct brcmf_cfg80211_security *sec;
 	s32 pval = 0;
 	s32 gval = 0;
+	s32 wsec;
 	s32 err = 0;
 
 	if (sme->crypto.n_ciphers_pairwise) {
@@ -1412,7 +1413,12 @@ brcmf_set_set_cipher(struct net_device *ndev,
 	if (brcmf_find_wpsie(sme->ie, sme->ie_len) && !pval && !gval &&
 	    sme->privacy)
 		pval = AES_ENABLED;
-	err = brcmf_fil_bsscfg_int_set(netdev_priv(ndev), "wsec", pval | gval);
+
+	if (mfp)
+		wsec = pval | gval | MFP_CAPABLE;
+	else
+		wsec = pval | gval;
+	err = brcmf_fil_bsscfg_int_set(netdev_priv(ndev), "wsec", wsec);
 	if (err) {
 		brcmf_err("error (%d)\n", err);
 		return err;
@@ -1582,7 +1588,6 @@ brcmf_cfg80211_connect(struct wiphy *wiphy, struct net_device *ndev,
 	u32 ie_len;
 	struct brcmf_ext_join_params_le *ext_join_params;
 	u16 chanspec;
-
 	s32 err = 0;
 
 	brcmf_dbg(TRACE, "Enter\n");
@@ -1651,7 +1656,7 @@ brcmf_cfg80211_connect(struct wiphy *wiphy, struct net_device *ndev,
 		goto done;
 	}
 
-	err = brcmf_set_set_cipher(ndev, sme);
+	err = brcmf_set_wsec_mode(ndev, sme, sme->mfp == NL80211_MFP_REQUIRED);
 	if (err) {
 		brcmf_err("wl_set_set_cipher failed (%d)\n", err);
 		goto done;
diff --git a/drivers/net/wireless/brcm80211/include/brcmu_wifi.h b/drivers/net/wireless/brcm80211/include/brcmu_wifi.h
index 7ca2aa1035b2..74419d4bd123 100644
--- a/drivers/net/wireless/brcm80211/include/brcmu_wifi.h
+++ b/drivers/net/wireless/brcm80211/include/brcmu_wifi.h
@@ -217,6 +217,9 @@ static inline bool ac_bitmap_tst(u8 bitmap, int prec)
 #define WSEC_SWFLAG		0x0008
 /* to go into transition mode without setting wep */
 #define SES_OW_ENABLED		0x0040
+/* MFP */
+#define MFP_CAPABLE		0x0200
+#define MFP_REQUIRED		0x0400
 
 /* WPA authentication mode bitvec */
 #define WPA_AUTH_DISABLED	0x0000	/* Legacy (i.e., non-WPA) */
-- 
cgit v1.2.2


From f5e8560ee0f10e7daf4bc16caf7c50bb30fced9c Mon Sep 17 00:00:00 2001
From: Amitkumar Karwar <akarwar@marvell.com>
Date: Tue, 25 Mar 2014 19:01:18 -0700
Subject: mwifiex: corner case NULL pointer dereference fix

When next scan command is delayed due to Tx traffic and
meanwhile synchronous command is received followed by a signal,
we cance all pending commands. NULL pointer dereference is seen
in this case while queueing next command in scan delay timer.
This patch adds a check to fix this issue.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/main.c b/drivers/net/wireless/mwifiex/main.c
index 5397ee0ad652..668a91cd1154 100644
--- a/drivers/net/wireless/mwifiex/main.c
+++ b/drivers/net/wireless/mwifiex/main.c
@@ -38,7 +38,8 @@ static void scan_delay_timer_fn(unsigned long data)
 	if (adapter->surprise_removed)
 		return;
 
-	if (adapter->scan_delay_cnt == MWIFIEX_MAX_SCAN_DELAY_CNT) {
+	if (adapter->scan_delay_cnt == MWIFIEX_MAX_SCAN_DELAY_CNT ||
+	    !adapter->scan_processing) {
 		/*
 		 * Abort scan operation by cancelling all pending scan
 		 * commands
-- 
cgit v1.2.2


From b49f639f841cf19cc7a8737c836210d4fa0baa76 Mon Sep 17 00:00:00 2001
From: Amitkumar Karwar <akarwar@marvell.com>
Date: Tue, 25 Mar 2014 19:01:19 -0700
Subject: mwifiex: correction in sleep confirm command sequence number

Incremented sequence number was not being used for SLEEP confirm
command. This patch fixes the issue.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/cmdevt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c
index b41155829220..cc81fcd35959 100644
--- a/drivers/net/wireless/mwifiex/cmdevt.c
+++ b/drivers/net/wireless/mwifiex/cmdevt.c
@@ -277,11 +277,11 @@ static int mwifiex_dnld_sleep_confirm_cmd(struct mwifiex_adapter *adapter)
 
 	priv = mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY);
 
+	adapter->seq_num++;
 	sleep_cfm_buf->seq_num =
 		cpu_to_le16((HostCmd_SET_SEQ_NO_BSS_INFO
 					(adapter->seq_num, priv->bss_num,
 					 priv->bss_type)));
-	adapter->seq_num++;
 
 	if (adapter->iface_type == MWIFIEX_USB) {
 		sleep_cfm_tmp =
-- 
cgit v1.2.2


From c0dbba6688b0acd582b7d6d59574fdf50f950981 Mon Sep 17 00:00:00 2001
From: Amitkumar Karwar <akarwar@marvell.com>
Date: Tue, 25 Mar 2014 19:01:20 -0700
Subject: mwifiex: cancel pending commands during host sleep

Sometimes we may end up downloading other commands when host
sleep is configured. This patch makes sure that pending
commands are cancelled and we stop queueing further commands
during host sleep.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/cmdevt.c    | 5 +++++
 drivers/net/wireless/mwifiex/main.h      | 1 +
 drivers/net/wireless/mwifiex/pcie.c      | 1 +
 drivers/net/wireless/mwifiex/sdio.c      | 2 ++
 drivers/net/wireless/mwifiex/sta_ioctl.c | 3 +++
 drivers/net/wireless/mwifiex/usb.c       | 1 +
 6 files changed, 13 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c
index cc81fcd35959..a23791d49955 100644
--- a/drivers/net/wireless/mwifiex/cmdevt.c
+++ b/drivers/net/wireless/mwifiex/cmdevt.c
@@ -509,6 +509,11 @@ int mwifiex_send_cmd(struct mwifiex_private *priv, u16 cmd_no,
 		return -1;
 	}
 
+	if (adapter->hs_enabling && cmd_no != HostCmd_CMD_802_11_HS_CFG_ENH) {
+		dev_err(adapter->dev, "PREP_CMD: host entering sleep state\n");
+		return -1;
+	}
+
 	if (adapter->surprise_removed) {
 		dev_err(adapter->dev, "PREP_CMD: card is removed\n");
 		return -1;
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index a67f7da12b30..d53e1e8c9467 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -774,6 +774,7 @@ struct mwifiex_adapter {
 	u16 hs_activate_wait_q_woken;
 	wait_queue_head_t hs_activate_wait_q;
 	bool is_suspended;
+	bool hs_enabling;
 	u8 event_body[MAX_EVENT_SIZE];
 	u32 hw_dot_11n_dev_cap;
 	u8 hw_dev_mcs_support;
diff --git a/drivers/net/wireless/mwifiex/pcie.c b/drivers/net/wireless/mwifiex/pcie.c
index 7614a42f9c36..a7e8b96b2d90 100644
--- a/drivers/net/wireless/mwifiex/pcie.c
+++ b/drivers/net/wireless/mwifiex/pcie.c
@@ -120,6 +120,7 @@ static int mwifiex_pcie_suspend(struct device *dev)
 
 	/* Indicate device suspended */
 	adapter->is_suspended = true;
+	adapter->hs_enabling = false;
 
 	return 0;
 }
diff --git a/drivers/net/wireless/mwifiex/sdio.c b/drivers/net/wireless/mwifiex/sdio.c
index e0dcd3ed7a69..d206f04d4994 100644
--- a/drivers/net/wireless/mwifiex/sdio.c
+++ b/drivers/net/wireless/mwifiex/sdio.c
@@ -237,6 +237,7 @@ static int mwifiex_sdio_suspend(struct device *dev)
 	/* Enable the Host Sleep */
 	if (!mwifiex_enable_hs(adapter)) {
 		dev_err(adapter->dev, "cmd: failed to suspend\n");
+		adapter->hs_enabling = false;
 		return -EFAULT;
 	}
 
@@ -245,6 +246,7 @@ static int mwifiex_sdio_suspend(struct device *dev)
 
 	/* Indicate device suspended */
 	adapter->is_suspended = true;
+	adapter->hs_enabling = false;
 
 	return ret;
 }
diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c
index 33170af150f6..2a9cfd563a07 100644
--- a/drivers/net/wireless/mwifiex/sta_ioctl.c
+++ b/drivers/net/wireless/mwifiex/sta_ioctl.c
@@ -508,6 +508,9 @@ int mwifiex_enable_hs(struct mwifiex_adapter *adapter)
 	memset(&hscfg, 0, sizeof(struct mwifiex_ds_hs_cfg));
 	hscfg.is_invoke_hostcmd = true;
 
+	adapter->hs_enabling = true;
+	mwifiex_cancel_all_pending_cmd(adapter);
+
 	if (mwifiex_set_hs_params(mwifiex_get_priv(adapter,
 						   MWIFIEX_BSS_ROLE_STA),
 				  HostCmd_ACT_GEN_SET, MWIFIEX_SYNC_CMD,
diff --git a/drivers/net/wireless/mwifiex/usb.c b/drivers/net/wireless/mwifiex/usb.c
index ae30c390ebd3..edbe4aff00d8 100644
--- a/drivers/net/wireless/mwifiex/usb.c
+++ b/drivers/net/wireless/mwifiex/usb.c
@@ -459,6 +459,7 @@ static int mwifiex_usb_suspend(struct usb_interface *intf, pm_message_t message)
 	 * 'suspended' state and a 'disconnect' one.
 	 */
 	adapter->is_suspended = true;
+	adapter->hs_enabling = false;
 
 	if (atomic_read(&card->rx_cmd_urb_pending) && card->rx_cmd.urb)
 		usb_kill_urb(card->rx_cmd.urb);
-- 
cgit v1.2.2


From 247341e659f4cef9fefc1a27ef9e12f7975289d5 Mon Sep 17 00:00:00 2001
From: Andrea Merello <andrea.merello@gmail.com>
Date: Wed, 26 Mar 2014 20:57:46 +0100
Subject: rtl818x: add registers for rtl8187se

Adds registers for rtl8187se to the rtl818x common struct

Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl818x.h | 266 +++++++++++++++++++++++++++------
 1 file changed, 217 insertions(+), 49 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtl818x/rtl818x.h b/drivers/net/wireless/rtl818x/rtl818x.h
index 1815b15d03b1..99dbc123b753 100644
--- a/drivers/net/wireless/rtl818x/rtl818x.h
+++ b/drivers/net/wireless/rtl818x/rtl818x.h
@@ -16,30 +16,88 @@
 #define RTL818X_H
 
 struct rtl818x_csr {
-	u8	MAC[6];
+
+	union {
+		u8	MAC[6];
+		u8	offset1[6];     /* upper page indexing helpers */
+		__le16	offset2[1];
+		__le32	offset4[1];
+	} __packed;
+
 	u8	reserved_0[2];
-	__le32	MAR[2];
-	u8	RX_FIFO_COUNT;
-	u8	reserved_1;
-	u8	TX_FIFO_COUNT;
-	u8	BQREQ;
-	u8	reserved_2[4];
+
+	union {
+		__le32	MAR[2];  /* 0x8 */
+
+		struct{ /* rtl8187se */
+			u8 rf_sw_config; /* 0x8 */
+			u8 reserved_01[3];
+			__le32 TMGDA; /* 0xc */
+		} __packed;
+	} __packed;
+
+	union { /*  0x10  */
+		struct {
+			u8	RX_FIFO_COUNT;
+			u8	reserved_1;
+			u8	TX_FIFO_COUNT;
+			u8	BQREQ;
+		} __packed;
+
+		__le32 TBKDA; /* for 8187se */
+	} __packed;
+
+	__le32 TBEDA; /* 0x14 - for rtl8187se */
+
 	__le32	TSFT[2];
-	__le32	TLPDA;
-	__le32	TNPDA;
-	__le32	THPDA;
-	__le16	BRSR;
-	u8	BSSID[6];
-	u8	RESP_RATE;
-	u8	EIFS;
-	u8	reserved_3[1];
-	u8	CMD;
+
+	union { /* 0x20 */
+		__le32	TLPDA;
+		__le32  TVIDA; /* for 8187se */
+	} __packed;
+
+	union { /* 0x24 */
+		__le32	TNPDA;
+		__le32  TVODA; /* for 8187se */
+	} __packed;
+
+	/* hi pri ring for all cards */
+	__le32	THPDA; /* 0x28 */
+
+	union { /* 0x2c */
+		struct {
+			u8 reserved_2a;
+			u8 EIFS_8187SE;
+		} __packed;
+
+		__le16	BRSR;
+	} __packed;
+
+	u8	BSSID[6]; /* 0x2e */
+
+	union { /* 0x34 */
+		struct {
+			u8 RESP_RATE;
+			u8 EIFS;
+		} __packed;
+		__le16 BRSR_8187SE;
+	} __packed;
+
+	u8	reserved_3[1]; /* 0x36 */
+	u8	CMD; /* 0x37 */
 #define RTL818X_CMD_TX_ENABLE		(1 << 2)
 #define RTL818X_CMD_RX_ENABLE		(1 << 3)
 #define RTL818X_CMD_RESET		(1 << 4)
-	u8	reserved_4[4];
-	__le16	INT_MASK;
-	__le16	INT_STATUS;
+	u8	reserved_4[4]; /* 0x38 */
+	union {
+		struct {
+			__le16	INT_MASK;
+			__le16	INT_STATUS;
+		} __packed;
+
+		__le32	INT_STATUS_SE; /* 0x3c */
+	} __packed;
+/* status bits for rtl8187 and rtl8180/8185 */
 #define RTL818X_INT_RX_OK		(1 <<  0)
 #define RTL818X_INT_RX_ERR		(1 <<  1)
 #define RTL818X_INT_TXL_OK		(1 <<  2)
@@ -56,7 +114,34 @@ struct rtl818x_csr {
 #define RTL818X_INT_BEACON		(1 << 13)
 #define RTL818X_INT_TIME_OUT		(1 << 14)
 #define RTL818X_INT_TX_FO		(1 << 15)
-	__le32	TX_CONF;
+/* status bits for rtl8187se */
+#define RTL818X_INT_SE_TIMER3		(1 <<  0)
+#define RTL818X_INT_SE_TIMER2		(1 <<  1)
+#define RTL818X_INT_SE_RQ0SOR		(1 <<  2)
+#define RTL818X_INT_SE_TXBED_OK		(1 <<  3)
+#define RTL818X_INT_SE_TXBED_ERR	(1 <<  4)
+#define RTL818X_INT_SE_TXBE_OK		(1 <<  5)
+#define RTL818X_INT_SE_TXBE_ERR		(1 <<  6)
+#define RTL818X_INT_SE_RX_OK		(1 <<  7)
+#define RTL818X_INT_SE_RX_ERR		(1 <<  8)
+#define RTL818X_INT_SE_TXL_OK		(1 <<  9)
+#define RTL818X_INT_SE_TXL_ERR		(1 << 10)
+#define RTL818X_INT_SE_RX_DU		(1 << 11)
+#define RTL818X_INT_SE_RX_FIFO		(1 << 12)
+#define RTL818X_INT_SE_TXN_OK		(1 << 13)
+#define RTL818X_INT_SE_TXN_ERR		(1 << 14)
+#define RTL818X_INT_SE_TXH_OK		(1 << 15)
+#define RTL818X_INT_SE_TXH_ERR		(1 << 16)
+#define RTL818X_INT_SE_TXB_OK		(1 << 17)
+#define RTL818X_INT_SE_TXB_ERR		(1 << 18)
+#define RTL818X_INT_SE_ATIM_TO		(1 << 19)
+#define RTL818X_INT_SE_BK_TO		(1 << 20)
+#define RTL818X_INT_SE_TIMER1		(1 << 21)
+#define RTL818X_INT_SE_TX_FIFO		(1 << 22)
+#define RTL818X_INT_SE_WAKEUP		(1 << 23)
+#define RTL818X_INT_SE_BK_DMA		(1 << 24)
+#define RTL818X_INT_SE_TMGD_OK		(1 << 30)
+	__le32	TX_CONF; /* 0x40 */
 #define RTL818X_TX_CONF_LOOPBACK_MAC	(1 << 17)
 #define RTL818X_TX_CONF_LOOPBACK_CONT	(3 << 17)
 #define RTL818X_TX_CONF_NO_ICV		(1 << 19)
@@ -68,6 +153,7 @@ struct rtl818x_csr {
 #define RTL818X_TX_CONF_R8185_D		(5 << 25)
 #define RTL818X_TX_CONF_R8187vD		(5 << 25)
 #define RTL818X_TX_CONF_R8187vD_B	(6 << 25)
+#define RTL818X_TX_CONF_RTL8187SE	(6 << 25)
 #define RTL818X_TX_CONF_HWVER_MASK	(7 << 25)
 #define RTL818X_TX_CONF_DISREQQSIZE	(1 << 28)
 #define RTL818X_TX_CONF_PROBE_DTS	(1 << 29)
@@ -122,28 +208,64 @@ struct rtl818x_csr {
 	u8	PGSELECT;
 	u8	SECURITY;
 	__le32	ANAPARAM2;
-	u8	reserved_10[12];
-	__le16	BEACON_INTERVAL;
-	__le16	ATIM_WND;
-	__le16	BEACON_INTERVAL_TIME;
-	__le16	ATIMTR_INTERVAL;
-	u8	PHY_DELAY;
-	u8	CARRIER_SENSE_COUNTER;
-	u8	reserved_11[2];
-	u8	PHY[4];
-	__le16	RFPinsOutput;
-	__le16	RFPinsEnable;
-	__le16	RFPinsSelect;
-	__le16	RFPinsInput;
-	__le32	RF_PARA;
-	__le32	RF_TIMING;
-	u8	GP_ENABLE;
-	u8	GPIO0;
-	u8	GPIO1;
-	u8	reserved_12;
-	__le32	HSSI_PARA;
-	u8	reserved_13[4];
-	u8	TX_AGC_CTL;
+	u8	reserved_10[8];
+	__le32  IMR;		/* 0x6c	- Interrupt mask reg for 8187se */
+#define IMR_TMGDOK      ((1 << 30))
+#define IMR_DOT11HINT	((1 << 25))	/* 802.11h Measurement Interrupt */
+#define IMR_BCNDMAINT	((1 << 24))	/* Beacon DMA Interrupt */
+#define IMR_WAKEINT	((1 << 23))	/* Wake Up Interrupt */
+#define IMR_TXFOVW	((1 << 22))	/* Tx FIFO Overflow */
+#define IMR_TIMEOUT1	((1 << 21))	/* Time Out Interrupt 1 */
+#define IMR_BCNINT	((1 << 20))	/* Beacon Time out */
+#define IMR_ATIMINT	((1 << 19))	/* ATIM Time Out */
+#define IMR_TBDER	((1 << 18))	/* Tx Beacon Descriptor Error */
+#define IMR_TBDOK	((1 << 17))	/* Tx Beacon Descriptor OK */
+#define IMR_THPDER	((1 << 16))	/* Tx High Priority Descriptor Error */
+#define IMR_THPDOK	((1 << 15))	/* Tx High Priority Descriptor OK */
+#define IMR_TVODER	((1 << 14))	/* Tx AC_VO Descriptor Error Int */
+#define IMR_TVODOK	((1 << 13))	/* Tx AC_VO Descriptor OK Interrupt */
+#define IMR_FOVW	((1 << 12))	/* Rx FIFO Overflow Interrupt */
+#define IMR_RDU		((1 << 11))	/* Rx Descriptor Unavailable */
+#define IMR_TVIDER	((1 << 10))	/* Tx AC_VI Descriptor Error */
+#define IMR_TVIDOK	((1 << 9))	/* Tx AC_VI Descriptor OK Interrupt */
+#define IMR_RER		((1 << 8))	/* Rx Error Interrupt */
+#define IMR_ROK		((1 << 7))	/* Receive OK Interrupt */
+#define IMR_TBEDER	((1 << 6))	/* Tx AC_BE Descriptor Error */
+#define IMR_TBEDOK	((1 << 5))	/* Tx AC_BE Descriptor OK */
+#define IMR_TBKDER	((1 << 4))	/* Tx AC_BK Descriptor Error */
+#define IMR_TBKDOK	((1 << 3))	/* Tx AC_BK Descriptor OK */
+#define IMR_RQOSOK	((1 << 2))	/* Rx QoS OK Interrupt */
+#define IMR_TIMEOUT2	((1 << 1))	/* Time Out Interrupt 2 */
+#define IMR_TIMEOUT3	((1 << 0))	/* Time Out Interrupt 3 */
+	__le16	BEACON_INTERVAL; /* 0x70 */
+	__le16	ATIM_WND; /*  0x72 */
+	__le16	BEACON_INTERVAL_TIME; /*  0x74 */
+	__le16	ATIMTR_INTERVAL; /*  0x76 */
+	u8	PHY_DELAY; /*  0x78 */
+	u8	CARRIER_SENSE_COUNTER; /* 0x79 */
+	u8	reserved_11[2]; /* 0x7a */
+	u8	PHY[4]; /* 0x7c  */
+	__le16	RFPinsOutput; /* 0x80 */
+	__le16	RFPinsEnable; /* 0x82 */
+	__le16	RFPinsSelect; /* 0x84 */
+	__le16	RFPinsInput;  /* 0x86 */
+	__le32	RF_PARA; /*  0x88 */
+	__le32	RF_TIMING; /*  0x8c */
+	u8	GP_ENABLE; /*  0x90 */
+	u8	GPIO0; /*  0x91 */
+	u8	GPIO1; /*  0x92 */
+	u8	TPPOLL_STOP; /*  0x93 - rtl8187se only */
+#define RTL818x_TPPOLL_STOP_BQ			(1 << 7)
+#define RTL818x_TPPOLL_STOP_VI			(1 << 4)
+#define RTL818x_TPPOLL_STOP_VO			(1 << 5)
+#define RTL818x_TPPOLL_STOP_BE			(1 << 3)
+#define RTL818x_TPPOLL_STOP_BK			(1 << 2)
+#define RTL818x_TPPOLL_STOP_MG			(1 << 1)
+#define RTL818x_TPPOLL_STOP_HI			(1 << 6)
+
+	__le32	HSSI_PARA; /*  0x94 */
+	u8	reserved_13[4]; /* 0x98 */
+	u8	TX_AGC_CTL; /*  0x9c */
 #define RTL818X_TX_AGC_CTL_PERPACKET_GAIN	(1 << 0)
 #define RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL	(1 << 1)
 #define RTL818X_TX_AGC_CTL_FEEDBACK_ANT		(1 << 2)
@@ -167,7 +289,8 @@ struct rtl818x_csr {
 	u8	reserved_17[24];
 	u8	CONFIG5;
 	u8	TX_DMA_POLLING;
-	u8	reserved_18[2];
+	u8	PHY_PR;
+	u8	reserved_18;
 	__le16	CWR;
 	u8	RETRY_CTR;
 	u8	reserved_19[3];
@@ -179,14 +302,59 @@ struct rtl818x_csr {
 	__le32	RDSAR;
 	__le16	TID_AC_MAP;
 	u8	reserved_20[4];
-	u8	ANAPARAM3;
-	u8	reserved_21[5];
-	__le16	FEMR;
-	u8	reserved_22[4];
-	__le16	TALLY_CNT;
-	u8	TALLY_SEL;
+	union {
+		__le16	ANAPARAM3; /* 0xee */
+		u8	ANAPARAM3A; /* for rtl8187 */
+	};
+
+#define AC_PARAM_TXOP_LIMIT_SHIFT	16
+#define AC_PARAM_ECW_MAX_SHIFT		12
+#define AC_PARAM_ECW_MIN_SHIFT		8
+#define AC_PARAM_AIFS_SHIFT		0
+
+	__le32 AC_VO_PARAM; /* 0xf0 */
+
+	union { /* 0xf4 */
+		__le32 AC_VI_PARAM;
+		__le16 FEMR;
+	} __packed;
+
+	union{ /* 0xf8 */
+		__le32  AC_BE_PARAM; /* rtl8187se */
+		struct{
+			u8      reserved_21[2];
+			__le16	TALLY_CNT; /* 0xfa */
+		} __packed;
+	} __packed;
+
+	union {
+		u8	TALLY_SEL; /* 0xfc */
+		__le32  AC_BK_PARAM;
+
+	} __packed;
+
 } __packed;
 
+/* These are addresses with NON-standard usage.
+ * They have offsets very far from this struct.
+ * I don't like to introduce a ton of "reserved"..
+ * They are for RTL8187SE
+ */
+#define REG_ADDR1(addr)	((u8 __iomem *)(&priv->map->offset1[(addr)]))
+#define REG_ADDR2(addr)	((__le16 __iomem *)(&priv->map->offset2[((addr) >> 1)]))
+#define REG_ADDR4(addr)	((__le32 __iomem *)(&priv->map->offset4[((addr) >> 2)]))
+
+#define FEMR_SE		REG_ADDR2(0x1D4)
+#define ARFR		REG_ADDR2(0x1E0)
+#define RFSW_CTRL	REG_ADDR2(0x272)
+#define SW_3W_DB0	REG_ADDR2(0x274)
+#define SW_3W_DB0_4	REG_ADDR4(0x274)
+#define SW_3W_DB1	REG_ADDR2(0x278)
+#define SW_3W_DB1_4	REG_ADDR4(0x278)
+#define SW_3W_CMD1	REG_ADDR1(0x27D)
+#define PI_DATA_REG	REG_ADDR2(0x360)
+#define SI_DATA_REG     REG_ADDR2(0x362)
+
 struct rtl818x_rf_ops {
 	char *name;
 	void (*init)(struct ieee80211_hw *);
-- 
cgit v1.2.2


From 20296bf06213e6472a7feccc4e3197ad982a76ed Mon Sep 17 00:00:00 2001
From: Andrea Merello <andrea.merello@gmail.com>
Date: Wed, 26 Mar 2014 20:58:14 +0100
Subject: rtl8180: add rtl8187se chip type

Add back rtl8187se chip type to the enum for known chips.
This causes unhandled switch/case warning that will be fixed
in following patch

Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl8180/rtl8180.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h b/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
index ad64c5e84857..e7127f30ec09 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
+++ b/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
@@ -92,6 +92,7 @@ struct rtl8180_priv {
 	enum {
 		RTL818X_CHIP_FAMILY_RTL8180,
 		RTL818X_CHIP_FAMILY_RTL8185,
+		RTL818X_CHIP_FAMILY_RTL8187SE,
 	} chip_family;
 	u32 anaparam;
 	u16 rfparam;
-- 
cgit v1.2.2


From ac546bfb30a867fc449028bcd33543e01a8ce605 Mon Sep 17 00:00:00 2001
From: Andrea Merello <andrea.merello@gmail.com>
Date: Wed, 26 Mar 2014 20:58:43 +0100
Subject: rtl8180: add rtl8187se fields to TX descriptor

This patch modifies the TX descriptor struct so it can work also
for rtl8187se.
Some reserved field is now meaningful, and where needed union is
used.

Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl8180/rtl8180.h | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h b/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
index e7127f30ec09..47a084ccc555 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
+++ b/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
@@ -34,13 +34,25 @@ struct rtl8180_tx_desc {
 	__le16 rts_duration;
 	__le16 plcp_len;
 	__le32 tx_buf;
-	__le32 frame_len;
+	union{
+		__le32 frame_len;
+		struct {
+			__le16 frame_len_se;
+			__le16 frame_duration;
+		} __packed;
+	} __packed;
 	__le32 next_tx_desc;
 	u8 cw;
 	u8 retry_limit;
 	u8 agc;
 	u8 flags2;
-	u32 reserved[2];
+	/* rsvd for 8180/8185.
+	 * valid for 8187se but we dont use it
+	 */
+	u32 reserved;
+	/* all rsvd for 8180/8185 */
+	__le16 flags3;
+	__le16 frag_qsize;
 } __packed;
 
 struct rtl8180_rx_desc {
-- 
cgit v1.2.2


From d209f3b473e0135ee7d800b5fde50955dbdfc246 Mon Sep 17 00:00:00 2001
From: Andrea Merello <andrea.merello@gmail.com>
Date: Wed, 26 Mar 2014 20:59:25 +0100
Subject: rtl8180: add basic rate configuration support for rtl8187se

Basic rate configuration is a bit different for rtl8187se.
Adding this also fixes the gcc warning introduced in last patch
about unhandled case in switch.

Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl8180/dev.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c
index 767e1048f336..6b237ed15eed 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c
@@ -412,7 +412,6 @@ static void rtl8180_conf_basic_rates(struct ieee80211_hw *dev,
 		reg &= ~3;
 		reg |= max;
 		rtl818x_iowrite16(priv, &priv->map->BRSR, reg);
-
 		break;
 
 	case RTL818X_CHIP_FAMILY_RTL8185:
@@ -420,6 +419,11 @@ static void rtl8180_conf_basic_rates(struct ieee80211_hw *dev,
 		rtl818x_iowrite16(priv, &priv->map->BRSR, rates_mask);
 		rtl818x_iowrite8(priv, &priv->map->RESP_RATE, (max << 4) | min);
 		break;
+
+	case RTL818X_CHIP_FAMILY_RTL8187SE:
+		/* in 8187se this is a BITMAP */
+		rtl818x_iowrite16(priv, &priv->map->BRSR_8187SE, rates_mask);
+		break;
 	}
 }
 
-- 
cgit v1.2.2


From 21025920ccb2f0bc2870391467ba3ac7ab5f86cc Mon Sep 17 00:00:00 2001
From: Andrea Merello <andrea.merello@gmail.com>
Date: Wed, 26 Mar 2014 20:59:52 +0100
Subject: rtl8180: support for rtl8187se RX descriptors

Currently RX status descriptor and RX command descriptor are
represented using the same struct type.
This patch splits this by introducing different types for
rx status and command descriptor.
Doing this make it possible to handle rtl8187se RX descriptors
easier.
This patch do also this by adding specific cases where needed.

Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl8180/dev.c     | 52 +++++++++++++++++++-------
 drivers/net/wireless/rtl818x/rtl8180/rtl8180.h | 23 +++++++++---
 2 files changed, 57 insertions(+), 18 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c
index 6b237ed15eed..867ec07da414 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c
@@ -129,14 +129,30 @@ void rtl8180_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data)
 static void rtl8180_handle_rx(struct ieee80211_hw *dev)
 {
 	struct rtl8180_priv *priv = dev->priv;
+	struct rtl818x_rx_cmd_desc *cmd_desc;
 	unsigned int count = 32;
 	u8 signal, agc, sq;
 	dma_addr_t mapping;
 
 	while (count--) {
-		struct rtl8180_rx_desc *entry = &priv->rx_ring[priv->rx_idx];
+		void *entry = priv->rx_ring + priv->rx_idx * priv->rx_ring_sz;
 		struct sk_buff *skb = priv->rx_buf[priv->rx_idx];
-		u32 flags = le32_to_cpu(entry->flags);
+		u32 flags, flags2;
+		u64 tsft;
+
+		if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
+			struct rtl8187se_rx_desc *desc = entry;
+
+			flags = le32_to_cpu(desc->flags);
+			flags2 = le32_to_cpu(desc->flags2);
+			tsft = le64_to_cpu(desc->tsft);
+		} else {
+			struct rtl8180_rx_desc *desc = entry;
+
+			flags = le32_to_cpu(desc->flags);
+			flags2 = le32_to_cpu(desc->flags2);
+			tsft = le64_to_cpu(desc->tsft);
+		}
 
 		if (flags & RTL818X_RX_DESC_FLAG_OWN)
 			return;
@@ -146,7 +162,6 @@ static void rtl8180_handle_rx(struct ieee80211_hw *dev)
 				      RTL818X_RX_DESC_FLAG_RX_ERR)))
 			goto done;
 		else {
-			u32 flags2 = le32_to_cpu(entry->flags2);
 			struct ieee80211_rx_status rx_status = {0};
 			struct sk_buff *new_skb = dev_alloc_skb(MAX_RX_SIZE);
 
@@ -178,14 +193,18 @@ static void rtl8180_handle_rx(struct ieee80211_hw *dev)
 					signal = 90 - clamp_t(u8, agc, 25, 90);
 				else
 					signal = 95 - clamp_t(u8, agc, 30, 95);
-			} else {
+			} else if (priv->chip_family ==
+				   RTL818X_CHIP_FAMILY_RTL8180) {
 				sq = flags2 & 0xff;
 				signal = priv->rf->calc_rssi(agc, sq);
+			} else {
+				/* TODO: rtl8187se rssi */
+				signal = 10;
 			}
 			rx_status.signal = signal;
 			rx_status.freq = dev->conf.chandef.chan->center_freq;
 			rx_status.band = dev->conf.chandef.chan->band;
-			rx_status.mactime = le64_to_cpu(entry->tsft);
+			rx_status.mactime = tsft;
 			rx_status.flag |= RX_FLAG_MACTIME_START;
 			if (flags & RTL818X_RX_DESC_FLAG_CRC32_ERR)
 				rx_status.flag |= RX_FLAG_FAILED_FCS_CRC;
@@ -199,11 +218,13 @@ static void rtl8180_handle_rx(struct ieee80211_hw *dev)
 		}
 
 	done:
-		entry->rx_buf = cpu_to_le32(*((dma_addr_t *)skb->cb));
-		entry->flags = cpu_to_le32(RTL818X_RX_DESC_FLAG_OWN |
+		cmd_desc = entry;
+		cmd_desc->rx_buf = cpu_to_le32(*((dma_addr_t *)skb->cb));
+		cmd_desc->flags = cpu_to_le32(RTL818X_RX_DESC_FLAG_OWN |
 					   MAX_RX_SIZE);
 		if (priv->rx_idx == 31)
-			entry->flags |= cpu_to_le32(RTL818X_RX_DESC_FLAG_EOR);
+			cmd_desc->flags |=
+				cpu_to_le32(RTL818X_RX_DESC_FLAG_EOR);
 		priv->rx_idx = (priv->rx_idx + 1) % 32;
 	}
 }
@@ -529,11 +550,16 @@ static int rtl8180_init_hw(struct ieee80211_hw *dev)
 static int rtl8180_init_rx_ring(struct ieee80211_hw *dev)
 {
 	struct rtl8180_priv *priv = dev->priv;
-	struct rtl8180_rx_desc *entry;
+	struct rtl818x_rx_cmd_desc *entry;
 	int i;
 
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE)
+		priv->rx_ring_sz = sizeof(struct rtl8187se_rx_desc);
+	else
+		priv->rx_ring_sz = sizeof(struct rtl8180_rx_desc);
+
 	priv->rx_ring = pci_alloc_consistent(priv->pdev,
-					     sizeof(*priv->rx_ring) * 32,
+					     priv->rx_ring_sz * 32,
 					     &priv->rx_ring_dma);
 
 	if (!priv->rx_ring || (unsigned long)priv->rx_ring & 0xFF) {
@@ -541,13 +567,13 @@ static int rtl8180_init_rx_ring(struct ieee80211_hw *dev)
 		return -ENOMEM;
 	}
 
-	memset(priv->rx_ring, 0, sizeof(*priv->rx_ring) * 32);
+	memset(priv->rx_ring, 0, priv->rx_ring_sz * 32);
 	priv->rx_idx = 0;
 
 	for (i = 0; i < 32; i++) {
 		struct sk_buff *skb = dev_alloc_skb(MAX_RX_SIZE);
 		dma_addr_t *mapping;
-		entry = &priv->rx_ring[i];
+		entry = priv->rx_ring + priv->rx_ring_sz*i;
 		if (!skb) {
 			wiphy_err(dev->wiphy, "Cannot allocate RX skb\n");
 			return -ENOMEM;
@@ -587,7 +613,7 @@ static void rtl8180_free_rx_ring(struct ieee80211_hw *dev)
 		kfree_skb(skb);
 	}
 
-	pci_free_consistent(priv->pdev, sizeof(*priv->rx_ring) * 32,
+	pci_free_consistent(priv->pdev, priv->rx_ring_sz * 32,
 			    priv->rx_ring, priv->rx_ring_dma);
 	priv->rx_ring = NULL;
 }
diff --git a/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h b/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
index 47a084ccc555..d866cc6a845f 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
+++ b/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
@@ -55,13 +55,25 @@ struct rtl8180_tx_desc {
 	__le16 frag_qsize;
 } __packed;
 
+struct rtl818x_rx_cmd_desc {
+	__le32 flags;
+	u32 reserved;
+	__le32 rx_buf;
+} __packed;
+
 struct rtl8180_rx_desc {
 	__le32 flags;
 	__le32 flags2;
-	union {
-		__le32 rx_buf;
-		__le64 tsft;
-	};
+	__le64 tsft;
+
+} __packed;
+
+struct rtl8187se_rx_desc {
+	__le32 flags;
+	__le64 tsft;
+	__le32 flags2;
+	__le32 flags3;
+	u32 reserved[3];
 } __packed;
 
 struct rtl8180_tx_ring {
@@ -88,7 +100,8 @@ struct rtl8180_priv {
 
 	/* rtl8180 driver specific */
 	spinlock_t lock;
-	struct rtl8180_rx_desc *rx_ring;
+	void *rx_ring;
+	u8 rx_ring_sz;
 	dma_addr_t rx_ring_dma;
 	unsigned int rx_idx;
 	struct sk_buff *rx_buf[32];
-- 
cgit v1.2.2


From a373ebcb5a4cc0c7a99141bcf7942653facca330 Mon Sep 17 00:00:00 2001
From: Andrea Merello <andrea.merello@gmail.com>
Date: Wed, 26 Mar 2014 21:00:06 +0100
Subject: rtl8180: add ISR for rtl8187se

rtl8187se has more queues and different ISR flags.
This patch adds a separated ISR handler for rtl8187se

Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl8180/dev.c | 57 +++++++++++++++++++++++++++++-
 1 file changed, 56 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c
index 867ec07da414..242a4bc46b88 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c
@@ -264,6 +264,55 @@ static void rtl8180_handle_tx(struct ieee80211_hw *dev, unsigned int prio)
 	}
 }
 
+static irqreturn_t rtl8187se_interrupt(int irq, void *dev_id)
+{
+	struct ieee80211_hw *dev = dev_id;
+	struct rtl8180_priv *priv = dev->priv;
+	u32 reg;
+	unsigned long flags;
+	static int desc_err;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	/* Note: 32-bit interrupt status */
+	reg = rtl818x_ioread32(priv, &priv->map->INT_STATUS_SE);
+	if (unlikely(reg == 0xFFFFFFFF)) {
+		spin_unlock_irqrestore(&priv->lock, flags);
+		return IRQ_HANDLED;
+	}
+
+	rtl818x_iowrite32(priv, &priv->map->INT_STATUS_SE, reg);
+
+	if (reg & IMR_TIMEOUT1)
+		rtl818x_iowrite32(priv, &priv->map->INT_TIMEOUT, 0);
+
+	if (reg & (IMR_TBDOK | IMR_TBDER))
+		rtl8180_handle_tx(dev, 4);
+
+	if (reg & (IMR_TVODOK | IMR_TVODER))
+		rtl8180_handle_tx(dev, 0);
+
+	if (reg & (IMR_TVIDOK | IMR_TVIDER))
+		rtl8180_handle_tx(dev, 1);
+
+	if (reg & (IMR_TBEDOK | IMR_TBEDER))
+		rtl8180_handle_tx(dev, 2);
+
+	if (reg & (IMR_TBKDOK | IMR_TBKDER))
+		rtl8180_handle_tx(dev, 3);
+
+	if (reg & (IMR_ROK | IMR_RER | RTL818X_INT_SE_RX_DU | IMR_RQOSOK))
+		rtl8180_handle_rx(dev);
+	/* The interface sometimes generates several RX DMA descriptor errors
+	 * at startup. Do not report these.
+	 */
+	if ((reg & RTL818X_INT_SE_RX_DU) && desc_err++ > 2)
+		if (net_ratelimit())
+			wiphy_err(dev->wiphy, "No RX DMA Descriptor avail\n");
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+	return IRQ_HANDLED;
+}
+
 static irqreturn_t rtl8180_interrupt(int irq, void *dev_id)
 {
 	struct ieee80211_hw *dev = dev_id;
@@ -685,8 +734,14 @@ static int rtl8180_start(struct ieee80211_hw *dev)
 	if (ret)
 		goto err_free_rings;
 
-	ret = request_irq(priv->pdev->irq, rtl8180_interrupt,
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
+		ret = request_irq(priv->pdev->irq, rtl8187se_interrupt,
 			  IRQF_SHARED, KBUILD_MODNAME, dev);
+	} else {
+		ret = request_irq(priv->pdev->irq, rtl8180_interrupt,
+			  IRQF_SHARED, KBUILD_MODNAME, dev);
+	}
+
 	if (ret) {
 		wiphy_err(dev->wiphy, "failed to register IRQ handler\n");
 		goto err_free_rings;
-- 
cgit v1.2.2


From 732c8932060dbc6630ca155d5eb8b484faccef45 Mon Sep 17 00:00:00 2001
From: Andrea Merello <andrea.merello@gmail.com>
Date: Wed, 26 Mar 2014 21:00:24 +0100
Subject: rtl8180: introduce functions to enable/disable ints and add support
 for rtl8187se

This patch introduces two dedicated functions for enabling and
disabling ints.
Support for rtl8187se is also added to them

Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl8180/dev.c | 36 +++++++++++++++++++++++++++---
 1 file changed, 33 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c
index 242a4bc46b88..92b6d53ca0ef 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c
@@ -463,6 +463,36 @@ void rtl8180_set_anaparam(struct rtl8180_priv *priv, u32 anaparam)
 	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
 }
 
+static void rtl8180_int_enable(struct ieee80211_hw *dev)
+{
+	struct rtl8180_priv *priv = dev->priv;
+
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
+		rtl818x_iowrite32(priv, &priv->map->IMR, IMR_TMGDOK |
+			  IMR_TBDER | IMR_THPDER |
+			  IMR_THPDER | IMR_THPDOK |
+			  IMR_TVODER | IMR_TVODOK |
+			  IMR_TVIDER | IMR_TVIDOK |
+			  IMR_TBEDER | IMR_TBEDOK |
+			  IMR_TBKDER | IMR_TBKDOK |
+			  IMR_RDU | IMR_RER |
+			  IMR_ROK | IMR_RQOSOK);
+	} else {
+		rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0xFFFF);
+	}
+}
+
+static void rtl8180_int_disable(struct ieee80211_hw *dev)
+{
+	struct rtl8180_priv *priv = dev->priv;
+
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
+		rtl818x_iowrite32(priv, &priv->map->IMR, 0);
+	} else {
+		rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0);
+	}
+}
+
 static void rtl8180_conf_basic_rates(struct ieee80211_hw *dev,
 			    u32 rates_mask)
 {
@@ -507,7 +537,7 @@ static int rtl8180_init_hw(struct ieee80211_hw *dev)
 	msleep(10);
 
 	/* reset */
-	rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0);
+	rtl8180_int_disable(dev);
 	rtl818x_ioread8(priv, &priv->map->CMD);
 
 	reg = rtl818x_ioread8(priv, &priv->map->CMD);
@@ -747,7 +777,7 @@ static int rtl8180_start(struct ieee80211_hw *dev)
 		goto err_free_rings;
 	}
 
-	rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0xFFFF);
+	rtl8180_int_enable(dev);
 
 	rtl818x_iowrite32(priv, &priv->map->MAR[0], ~0);
 	rtl818x_iowrite32(priv, &priv->map->MAR[1], ~0);
@@ -840,7 +870,7 @@ static void rtl8180_stop(struct ieee80211_hw *dev)
 	u8 reg;
 	int i;
 
-	rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0);
+	rtl8180_int_disable(dev);
 
 	reg = rtl818x_ioread8(priv, &priv->map->CMD);
 	reg &= ~RTL818X_CMD_TX_ENABLE;
-- 
cgit v1.2.2


From f18f112bde931faa25b33f7fa97281be5ef5e2c4 Mon Sep 17 00:00:00 2001
From: Andrea Merello <andrea.merello@gmail.com>
Date: Wed, 26 Mar 2014 21:00:42 +0100
Subject: rtl8180: don't write MAR registers for rtl8187se

MAR registers are not present in rtl8187se, and attempting to
write to them must be avoided

Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl8180/dev.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c
index 92b6d53ca0ef..cce972d289ef 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c
@@ -779,8 +779,13 @@ static int rtl8180_start(struct ieee80211_hw *dev)
 
 	rtl8180_int_enable(dev);
 
-	rtl818x_iowrite32(priv, &priv->map->MAR[0], ~0);
-	rtl818x_iowrite32(priv, &priv->map->MAR[1], ~0);
+	/* in rtl8187se at MAR regs offset there is the management
+	 * TX descriptor DMA addres..
+	 */
+	if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8187SE) {
+		rtl818x_iowrite32(priv, &priv->map->MAR[0], ~0);
+		rtl818x_iowrite32(priv, &priv->map->MAR[1], ~0);
+	}
 
 	reg = RTL818X_RX_CONF_ONLYERLPKT |
 	      RTL818X_RX_CONF_RX_AUTORESETPHY |
-- 
cgit v1.2.2


From 3ee44d6011f5df36c9b062cbf25536c3691235e3 Mon Sep 17 00:00:00 2001
From: Andrea Merello <andrea.merello@gmail.com>
Date: Wed, 26 Mar 2014 21:00:57 +0100
Subject: rtl8180: add TX queue mapping and support for rtl8187se

This patch adds tx queue mapping for rtl8187se and a long comment
block about their usages.
It adapts the TX function to use that map and it sets properly
the TX descriptor rtl8187se-only fields

Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl8180/dev.c     | 84 ++++++++++++++++++++++++--
 drivers/net/wireless/rtl818x/rtl8180/rtl8180.h | 10 ++-
 2 files changed, 88 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c
index cce972d289ef..eb86ede246d2 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c
@@ -85,6 +85,52 @@ static const struct ieee80211_channel rtl818x_channels[] = {
 	{ .center_freq = 2484 },
 };
 
+/* Queues for rtl8187se card
+ *
+ * name | reg  |  queue
+ *  BC  |  7   |   6
+ *  MG  |  1   |   0
+ *  HI  |  6   |   1
+ *  VO  |  5   |   2
+ *  VI  |  4   |   3
+ *  BE  |  3   |   4
+ *  BK  |  2   |   5
+ *
+ * The complete map for DMA kick reg using use all queue is:
+ * static const int rtl8187se_queues_map[RTL8187SE_NR_TX_QUEUES] =
+ *	{1, 6, 5, 4, 3, 2, 7};
+ *
+ * .. but.. Because for mac80211 4 queues are enough for QoS we use this
+ *
+ * name | reg  |  queue
+ *  BC  |  7   |   4  <- currently not used yet
+ *  MG  |  1   |   x  <- Not used
+ *  HI  |  6   |   x  <- Not used
+ *  VO  |  5   |   0  <- used
+ *  VI  |  4   |   1  <- used
+ *  BE  |  3   |   2  <- used
+ *  BK  |  2   |   3  <- used
+ *
+ * Beacon queue could be used, but this is not finished yet.
+ *
+ * I thougth about using the other two queues but I decided not to do this:
+ *
+ * - I'm unsure whether the mac80211 will ever try to use more than 4 queues
+ *   by itself.
+ *
+ * - I could route MGMT frames (currently sent over VO queue) to the MGMT
+ *   queue but since mac80211 will do not know about it, I will probably gain
+ *   some HW priority whenever the VO queue is not empty, but this gain is
+ *   limited by the fact that I had to stop the mac80211 queue whenever one of
+ *   the VO or MGMT queues is full, stopping also submitting of MGMT frame
+ *   to the driver.
+ *
+ * - I don't know how to set in the HW the contention window params for MGMT
+ *   and HI-prio queues.
+ */
+
+static const int rtl8187se_queues_map[RTL8187SE_NR_TX_QUEUES] = {5, 4, 3, 2, 7};
+
 /* Queues for rtl8180/rtl8185 cards
  *
  * name | reg  |  prio
@@ -358,6 +404,8 @@ static void rtl8180_tx(struct ieee80211_hw *dev,
 	u8 rc_flags;
 	u16 plcp_len = 0;
 	__le16 rts_duration = 0;
+	/* do arithmetic and then convert to le16 */
+	u16 frame_duration = 0;
 
 	prio = skb_get_queue_mapping(skb);
 	ring = &priv->tx_ring[prio];
@@ -369,7 +417,6 @@ static void rtl8180_tx(struct ieee80211_hw *dev,
 		kfree_skb(skb);
 		dev_err(&priv->pdev->dev, "TX DMA mapping error\n");
 		return;
-
 	}
 
 	tx_flags = RTL818X_TX_DESC_FLAG_OWN | RTL818X_TX_DESC_FLAG_FS |
@@ -405,6 +452,18 @@ static void rtl8180_tx(struct ieee80211_hw *dev,
 			plcp_len |= 1 << 15;
 	}
 
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
+		__le16 duration;
+		/* SIFS time (required by HW) is already included by
+		 * ieee80211_generic_frame_duration
+		 */
+		duration = ieee80211_generic_frame_duration(dev, priv->vif,
+					IEEE80211_BAND_2GHZ, skb->len,
+					ieee80211_get_tx_rate(dev, info));
+
+		frame_duration =  priv->ack_time + le16_to_cpu(duration);
+	}
+
 	spin_lock_irqsave(&priv->lock, flags);
 
 	if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
@@ -417,10 +476,19 @@ static void rtl8180_tx(struct ieee80211_hw *dev,
 	idx = (ring->idx + skb_queue_len(&ring->queue)) % ring->entries;
 	entry = &ring->desc[idx];
 
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
+		entry->frame_duration = cpu_to_le16(frame_duration);
+		entry->frame_len_se = cpu_to_le16(skb->len);
+
+		/* tpc polarity */
+		entry->flags3 = cpu_to_le16(1<<4);
+	} else
+		entry->frame_len = cpu_to_le32(skb->len);
+
 	entry->rts_duration = rts_duration;
 	entry->plcp_len = cpu_to_le16(plcp_len);
 	entry->tx_buf = cpu_to_le32(mapping);
-	entry->frame_len = cpu_to_le32(skb->len);
+
 	entry->flags2 = info->control.rates[1].idx >= 0 ?
 		ieee80211_get_alt_retry_rate(dev, info, 0)->bitrate << 4 : 0;
 	entry->retry_limit = info->control.rates[0].count;
@@ -442,11 +510,17 @@ static void rtl8180_tx(struct ieee80211_hw *dev,
 
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	hw_prio = rtl8180_queues_map[prio];
-
-	rtl818x_iowrite8(priv, &priv->map->TX_DMA_POLLING,
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
+		/* just poll: rings are stopped with TPPollStop reg */
+		hw_prio = rtl8187se_queues_map[prio];
+		rtl818x_iowrite8(priv, &priv->map->TX_DMA_POLLING,
+			 (1 << hw_prio));
+	} else {
+		hw_prio = rtl8180_queues_map[prio];
+		rtl818x_iowrite8(priv, &priv->map->TX_DMA_POLLING,
 			 (1 << hw_prio) | /* ring to poll  */
 			 (1<<1) | (1<<2));/* stopped rings */
+	}
 }
 
 void rtl8180_set_anaparam(struct rtl8180_priv *priv, u32 anaparam)
diff --git a/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h b/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
index d866cc6a845f..d64e75d766d4 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
+++ b/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
@@ -29,6 +29,14 @@
  */
 #define RTL8180_NR_TX_QUEUES 2
 
+/* rtl8187SE have 6 queues + beacon queues
+ * mac80211 can use 4 QoS data queue, + beacon = 5 tot
+ */
+#define RTL8187SE_NR_TX_QUEUES 5
+
+/* for array static allocation, it is the max of above */
+#define RTL818X_NR_TX_QUEUES 5
+
 struct rtl8180_tx_desc {
 	__le32 flags;
 	__le16 rts_duration;
@@ -105,7 +113,7 @@ struct rtl8180_priv {
 	dma_addr_t rx_ring_dma;
 	unsigned int rx_idx;
 	struct sk_buff *rx_buf[32];
-	struct rtl8180_tx_ring tx_ring[RTL8180_NR_TX_QUEUES];
+	struct rtl8180_tx_ring tx_ring[RTL818X_NR_TX_QUEUES];
 	struct ieee80211_channel channels[14];
 	struct ieee80211_rate rates[12];
 	struct ieee80211_supported_band band;
-- 
cgit v1.2.2


From f1026df86a9db7510599f51fa429f330a7e8d3aa Mon Sep 17 00:00:00 2001
From: Andrea Merello <andrea.merello@gmail.com>
Date: Wed, 26 Mar 2014 21:01:19 +0100
Subject: rtl8180: config carbus register for rtl8187se

configuration of carbus-related registers is different for
rtl8187se.
Introduce a dedicated function that does it for all cards in the
proper way

Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl8180/dev.c | 28 +++++++++++++++++++++-------
 1 file changed, 21 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c
index eb86ede246d2..06d3c30413e0 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c
@@ -601,6 +601,26 @@ static void rtl8180_conf_basic_rates(struct ieee80211_hw *dev,
 	}
 }
 
+static void rtl8180_config_cardbus(struct ieee80211_hw *dev)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	u16 reg16;
+	u8 reg8;
+
+	reg8 = rtl818x_ioread8(priv, &priv->map->CONFIG3);
+	reg8 |= 1 << 1;
+	rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg8);
+
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
+		rtl818x_iowrite16(priv, FEMR_SE, 0xffff);
+	} else {
+		reg16 = rtl818x_ioread16(priv, &priv->map->FEMR);
+			reg16 |= (1 << 15) | (1 << 14) | (1 << 4);
+		rtl818x_iowrite16(priv, &priv->map->FEMR, reg16);
+	}
+
+}
+
 static int rtl8180_init_hw(struct ieee80211_hw *dev)
 {
 	struct rtl8180_priv *priv = dev->priv;
@@ -632,13 +652,7 @@ static int rtl8180_init_hw(struct ieee80211_hw *dev)
 	msleep(200);
 
 	if (rtl818x_ioread8(priv, &priv->map->CONFIG3) & (1 << 3)) {
-		/* For cardbus */
-		reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
-		reg |= 1 << 1;
-		rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg);
-		reg = rtl818x_ioread16(priv, &priv->map->FEMR);
-		reg |= (1 << 15) | (1 << 14) | (1 << 4);
-		rtl818x_iowrite16(priv, &priv->map->FEMR, reg);
+		rtl8180_config_cardbus(dev);
 	}
 
 	rtl818x_iowrite8(priv, &priv->map->MSR, 0);
-- 
cgit v1.2.2


From fc32ac911ef49bb716ba52fab6b294f7a412e6be Mon Sep 17 00:00:00 2001
From: Andrea Merello <andrea.merello@gmail.com>
Date: Wed, 26 Mar 2014 21:01:47 +0100
Subject: rtl8180: add rtl8187se params to eeprom reading

rtl8187se nees extra parameters to be read from the eeprom.
This patch adds support for it

Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl8180/dev.c     | 18 +++++++++++++++++-
 drivers/net/wireless/rtl818x/rtl8180/rtl8180.h |  7 +++++++
 2 files changed, 24 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c
index 06d3c30413e0..740a58308a90 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c
@@ -1320,7 +1320,10 @@ static void rtl8180_eeprom_read(struct rtl8180_priv *priv)
 
 	eeprom_93cx6_multiread(&eeprom, 0x7, (__le16 *)priv->mac_addr, 3);
 
-	eeprom_cck_table_adr = 0x10;
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE)
+		eeprom_cck_table_adr = 0x30;
+	else
+		eeprom_cck_table_adr = 0x10;
 
 	/* CCK TX power */
 	for (i = 0; i < 14; i += 2) {
@@ -1348,6 +1351,19 @@ static void rtl8180_eeprom_read(struct rtl8180_priv *priv)
 		eeprom_93cx6_read(&eeprom, 0x19, &priv->rfparam);
 	}
 
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
+		eeprom_93cx6_read(&eeprom, 0x3F, &eeprom_val);
+		priv->antenna_diversity_en = !!(eeprom_val & 0x100);
+		priv->antenna_diversity_default = (eeprom_val & 0xC00) == 0x400;
+
+		eeprom_93cx6_read(&eeprom, 0x7C, &eeprom_val);
+		priv->xtal_out = eeprom_val & 0xF;
+		priv->xtal_in = (eeprom_val & 0xF0) >> 4;
+		priv->xtal_cal = !!(eeprom_val & 0x1000);
+		priv->thermal_meter_val = (eeprom_val & 0xF00) >> 8;
+		priv->thermal_meter_en = !!(eeprom_val & 0x2000);
+	}
+
 	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
 			RTL818X_EEPROM_CMD_NORMAL);
 }
diff --git a/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h b/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
index d64e75d766d4..d8f92de19634 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
+++ b/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
@@ -132,6 +132,13 @@ struct rtl8180_priv {
 	u8 csthreshold;
 	u8 mac_addr[ETH_ALEN];
 	u8 rf_type;
+	u8 xtal_out;
+	u8 xtal_in;
+	u8 xtal_cal;
+	u8 thermal_meter_val;
+	u8 thermal_meter_en;
+	u8 antenna_diversity_en;
+	u8 antenna_diversity_default;
 	/* sequence # */
 	u16 seqno;
 };
-- 
cgit v1.2.2


From ff3cbc2cb606c8f804b611291efe207d07275a18 Mon Sep 17 00:00:00 2001
From: Andrea Merello <andrea.merello@gmail.com>
Date: Wed, 26 Mar 2014 21:02:05 +0100
Subject: rtl8180: introduce functions for setting ANAPARAM 2 and 3 params

rtl8180 has one register for analog converters setting ,rtl8185 has
two and rtl8187se has three.
Setting those registers require more than a simple write, and for
one of them a function is already provided.
This patch introduces functions for the other two.
rtl8187se will use them. rtl8185 doesen't yet, but should

Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl8180/dev.c     | 40 ++++++++++++++++++++++++++
 drivers/net/wireless/rtl818x/rtl8180/rtl8180.h |  1 +
 drivers/net/wireless/rtl818x/rtl8180/rtl8225.c |  1 +
 3 files changed, 42 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c
index 740a58308a90..a3b67e656e59 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c
@@ -523,6 +523,46 @@ static void rtl8180_tx(struct ieee80211_hw *dev,
 	}
 }
 
+static void rtl8180_set_anaparam3(struct rtl8180_priv *priv, u16 anaparam3)
+{
+	u8 reg;
+
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
+			 RTL818X_EEPROM_CMD_CONFIG);
+
+	reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
+	rtl818x_iowrite8(priv, &priv->map->CONFIG3,
+		 reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
+
+	rtl818x_iowrite16(priv, &priv->map->ANAPARAM3, anaparam3);
+
+	rtl818x_iowrite8(priv, &priv->map->CONFIG3,
+		 reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
+
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
+			 RTL818X_EEPROM_CMD_NORMAL);
+}
+
+void rtl8180_set_anaparam2(struct rtl8180_priv *priv, u32 anaparam2)
+{
+	u8 reg;
+
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
+			 RTL818X_EEPROM_CMD_CONFIG);
+
+	reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
+	rtl818x_iowrite8(priv, &priv->map->CONFIG3,
+		 reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
+
+	rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, anaparam2);
+
+	rtl818x_iowrite8(priv, &priv->map->CONFIG3,
+		 reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
+
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
+			 RTL818X_EEPROM_CMD_NORMAL);
+}
+
 void rtl8180_set_anaparam(struct rtl8180_priv *priv, u32 anaparam)
 {
 	u8 reg;
diff --git a/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h b/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
index d8f92de19634..0ef3fc758928 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
+++ b/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
@@ -145,6 +145,7 @@ struct rtl8180_priv {
 
 void rtl8180_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data);
 void rtl8180_set_anaparam(struct rtl8180_priv *priv, u32 anaparam);
+void rtl8180_set_anaparam2(struct rtl8180_priv *priv, u32 anaparam2);
 
 static inline u8 rtl818x_ioread8(struct rtl8180_priv *priv, u8 __iomem *addr)
 {
diff --git a/drivers/net/wireless/rtl818x/rtl8180/rtl8225.c b/drivers/net/wireless/rtl818x/rtl8180/rtl8225.c
index 1c0fe238d995..9bda5bc78eda 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/rtl8225.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/rtl8225.c
@@ -282,6 +282,7 @@ static void rtl8225_rf_set_tx_power(struct ieee80211_hw *dev, int channel)
 
 	msleep(1); /* FIXME: optional? */
 
+	/* TODO: use set_anaparam2 dev.c_func*/
 	/* anaparam2 on */
 	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
 	reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
-- 
cgit v1.2.2


From 711d4ed38143a01b0f109e11e47e62e9f589d4e3 Mon Sep 17 00:00:00 2001
From: Andrea Merello <andrea.merello@gmail.com>
Date: Wed, 26 Mar 2014 21:02:28 +0100
Subject: rtl8180: add RF code for rtl8225 zebra v4

This patch introduce new RF code for rtl8225 zebra v4 radio
frontend.

This code contains a lot of black magic and it can work probably
only with the radio embdedded in the rtl8187se single-chip.

Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl8180/Makefile    |   2 +-
 drivers/net/wireless/rtl818x/rtl8180/dev.c       |   1 +
 drivers/net/wireless/rtl818x/rtl8180/rtl8225se.c | 475 +++++++++++++++++++++++
 drivers/net/wireless/rtl818x/rtl8180/rtl8225se.h |  61 +++
 4 files changed, 538 insertions(+), 1 deletion(-)
 create mode 100644 drivers/net/wireless/rtl818x/rtl8180/rtl8225se.c
 create mode 100644 drivers/net/wireless/rtl818x/rtl8180/rtl8225se.h

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtl818x/rtl8180/Makefile b/drivers/net/wireless/rtl818x/rtl8180/Makefile
index cb4fb8596f0b..08b056db4a3b 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/Makefile
+++ b/drivers/net/wireless/rtl818x/rtl8180/Makefile
@@ -1,4 +1,4 @@
-rtl8180-objs		:= dev.o rtl8225.o sa2400.o max2820.o grf5101.o
+rtl8180-objs		:= dev.o rtl8225.o sa2400.o max2820.o grf5101.o rtl8225se.o
 
 obj-$(CONFIG_RTL8180)	+= rtl8180.o
 
diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c
index a3b67e656e59..1c4a1485f4b7 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c
@@ -29,6 +29,7 @@
 #include "sa2400.h"
 #include "max2820.h"
 #include "grf5101.h"
+#include "rtl8225se.h"
 
 MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>");
 MODULE_AUTHOR("Andrea Merello <andrea.merello@gmail.com>");
diff --git a/drivers/net/wireless/rtl818x/rtl8180/rtl8225se.c b/drivers/net/wireless/rtl818x/rtl8180/rtl8225se.c
new file mode 100644
index 000000000000..fde89866fa8d
--- /dev/null
+++ b/drivers/net/wireless/rtl818x/rtl8180/rtl8225se.c
@@ -0,0 +1,475 @@
+
+/* Radio tuning for RTL8225 on RTL8187SE
+ *
+ * Copyright 2009 Larry Finger <Larry.Finger@lwfinger.net>
+ * Copyright 2014 Andrea Merello <andrea.merello@gmail.com>
+ *
+ * Based on the r8180 and Realtek r8187se drivers, which are:
+ * Copyright 2004-2005 Andrea Merello <andrea.merello@gmail.com>, et al.
+ *
+ * Also based on the rtl8187 driver, which is:
+ * Copyright 2007 Michael Wu <flamingice@sourmilk.net>
+ * Copyright 2007 Andrea Merello <andrea.merello@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <net/mac80211.h>
+
+#include "rtl8180.h"
+#include "rtl8225se.h"
+
+#define PFX "rtl8225 (se) "
+
+static const u32 RF_GAIN_TABLE[] = {
+	0x0096, 0x0076, 0x0056, 0x0036, 0x0016, 0x01f6, 0x01d6, 0x01b6,
+	0x0196, 0x0176, 0x00F7, 0x00D7, 0x00B7, 0x0097, 0x0077, 0x0057,
+	0x0037, 0x00FB, 0x00DB, 0x00BB, 0x00FF, 0x00E3, 0x00C3, 0x00A3,
+	0x0083, 0x0063, 0x0043, 0x0023, 0x0003, 0x01E3, 0x01C3, 0x01A3,
+	0x0183, 0x0163, 0x0143, 0x0123, 0x0103
+};
+
+static const u8 cck_ofdm_gain_settings[] = {
+	0x00, 0x01, 0x02, 0x03, 0x04, 0x05,
+	0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b,
+	0x0c, 0x0d, 0x0e, 0x0f, 0x10, 0x11,
+	0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
+	0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d,
+	0x1e, 0x1f, 0x20, 0x21, 0x22, 0x23,
+};
+
+static const u8 rtl8225se_tx_gain_cck_ofdm[] = {
+	0x02, 0x06, 0x0e, 0x1e, 0x3e, 0x7e
+};
+
+static const u8 rtl8225se_tx_power_cck[] = {
+	0x18, 0x17, 0x15, 0x11, 0x0c, 0x08, 0x04, 0x02,
+	0x1b, 0x1a, 0x17, 0x13, 0x0e, 0x09, 0x04, 0x02,
+	0x1f, 0x1e, 0x1a, 0x15, 0x10, 0x0a, 0x05, 0x02,
+	0x22, 0x21, 0x1d, 0x18, 0x11, 0x0b, 0x06, 0x02,
+	0x26, 0x25, 0x21, 0x1b, 0x14, 0x0d, 0x06, 0x03,
+	0x2b, 0x2a, 0x25, 0x1e, 0x16, 0x0e, 0x07, 0x03
+};
+
+static const u8 rtl8225se_tx_power_cck_ch14[] = {
+	0x18, 0x17, 0x15, 0x0c, 0x00, 0x00, 0x00, 0x00,
+	0x1b, 0x1a, 0x17, 0x0e, 0x00, 0x00, 0x00, 0x00,
+	0x1f, 0x1e, 0x1a, 0x0f, 0x00, 0x00, 0x00, 0x00,
+	0x22, 0x21, 0x1d, 0x11, 0x00, 0x00, 0x00, 0x00,
+	0x26, 0x25, 0x21, 0x13, 0x00, 0x00, 0x00, 0x00,
+	0x2b, 0x2a, 0x25, 0x15, 0x00, 0x00, 0x00, 0x00
+};
+
+static const u8 rtl8225se_tx_power_ofdm[] = {
+	0x80, 0x90, 0xa2, 0xb5, 0xcb, 0xe4
+};
+
+static const u32 rtl8225se_chan[] = {
+	0x0080, 0x0100, 0x0180, 0x0200, 0x0280, 0x0300, 0x0380,
+	0x0400, 0x0480, 0x0500, 0x0580, 0x0600, 0x0680, 0x074A,
+};
+
+static const u8 rtl8225sez2_tx_power_cck_ch14[] = {
+	0x36, 0x35, 0x2e, 0x1b, 0x00, 0x00, 0x00, 0x00
+};
+
+static const u8 rtl8225sez2_tx_power_cck_B[] = {
+	0x30, 0x2f, 0x29, 0x21, 0x19, 0x10, 0x08, 0x04
+};
+
+static const u8 rtl8225sez2_tx_power_cck_A[] = {
+	0x33, 0x32, 0x2b, 0x23, 0x1a, 0x11, 0x08, 0x04
+};
+
+static const u8 rtl8225sez2_tx_power_cck[] = {
+	0x36, 0x35, 0x2e, 0x25, 0x1c, 0x12, 0x09, 0x04
+};
+
+static const u8 ZEBRA_AGC[] = {
+	0x7E, 0x7E, 0x7E, 0x7E, 0x7D, 0x7C, 0x7B, 0x7A,
+	0x79, 0x78, 0x77, 0x76, 0x75, 0x74, 0x73, 0x72,
+	0x71, 0x70, 0x6F, 0x6E, 0x6D, 0x6C, 0x6B, 0x6A,
+	0x69, 0x68, 0x67, 0x66, 0x65, 0x64, 0x63, 0x62,
+	0x48, 0x47, 0x46, 0x45, 0x44, 0x29, 0x28, 0x27,
+	0x26, 0x25, 0x24, 0x23, 0x22, 0x21, 0x08, 0x07,
+	0x06, 0x05, 0x04, 0x03, 0x02, 0x01, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f,
+	0x0f, 0x0f, 0x10, 0x11, 0x12, 0x13, 0x15, 0x16,
+	0x17, 0x17, 0x18, 0x18, 0x19, 0x1a, 0x1a, 0x1b,
+	0x1b, 0x1c, 0x1c, 0x1d, 0x1d, 0x1d, 0x1e, 0x1e,
+	0x1f, 0x1f, 0x1f, 0x20, 0x20, 0x20, 0x20, 0x21,
+	0x21, 0x21, 0x22, 0x22, 0x22, 0x23, 0x23, 0x24,
+	0x24, 0x25, 0x25, 0x25, 0x26, 0x26, 0x27, 0x27,
+	0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F
+};
+
+static const u8 OFDM_CONFIG[] = {
+	0x10, 0x0F, 0x0A, 0x0C, 0x14, 0xFA, 0xFF, 0x50,
+	0x00, 0x50, 0x00, 0x00, 0x00, 0x5C, 0x00, 0x00,
+	0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0xA8, 0x26,
+	0x32, 0x33, 0x06, 0xA5, 0x6F, 0x55, 0xC8, 0xBB,
+	0x0A, 0xE1, 0x2C, 0x4A, 0x86, 0x83, 0x34, 0x00,
+	0x4F, 0x24, 0x6F, 0xC2, 0x03, 0x40, 0x80, 0x00,
+	0xC0, 0xC1, 0x58, 0xF1, 0x00, 0xC4, 0x90, 0x3e,
+	0xD8, 0x3C, 0x7B, 0x10, 0x10
+};
+
+static void rtl8187se_three_wire_io(struct ieee80211_hw *dev, u8 *data,
+				    u8 len, bool write)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	int i;
+	u8 tmp;
+
+	do {
+		for (i = 0; i < 5; i++) {
+			tmp = rtl818x_ioread8(priv, SW_3W_CMD1);
+			if (!(tmp & 0x3))
+				break;
+			udelay(10);
+		}
+		if (i == 5)
+			wiphy_err(dev->wiphy, PFX
+				"CmdReg: 0x%x RE/WE bits aren't clear\n", tmp);
+
+		tmp = rtl818x_ioread8(priv, &priv->map->rf_sw_config) | 0x02;
+		rtl818x_iowrite8(priv, &priv->map->rf_sw_config, tmp);
+
+		tmp = rtl818x_ioread8(priv, REG_ADDR1(0x84)) & 0xF7;
+		rtl818x_iowrite8(priv, REG_ADDR1(0x84), tmp);
+		if (write) {
+			if (len == 16) {
+				rtl818x_iowrite16(priv, SW_3W_DB0,
+				  *(u16 *)data);
+			} else if (len == 64) {
+				rtl818x_iowrite32(priv, SW_3W_DB0_4,
+				  *((u32 *)data));
+				rtl818x_iowrite32(priv, SW_3W_DB1_4,
+				  *((u32 *)(data + 4)));
+			} else
+				wiphy_err(dev->wiphy, PFX
+					"Unimplemented length\n");
+		} else {
+			rtl818x_iowrite16(priv, SW_3W_DB0, *(u16 *)data);
+		}
+		if (write)
+			tmp = 2;
+		else
+			tmp = 1;
+		rtl818x_iowrite8(priv, SW_3W_CMD1, tmp);
+		for (i = 0; i < 5; i++) {
+			tmp = rtl818x_ioread8(priv, SW_3W_CMD1);
+			if (!(tmp & 0x3))
+				break;
+			udelay(10);
+		}
+		rtl818x_iowrite8(priv, SW_3W_CMD1, 0);
+		if (!write) {
+			*((u16 *)data) = rtl818x_ioread16(priv, SI_DATA_REG);
+			*((u16 *)data) &= 0x0FFF;
+		}
+	} while (0);
+}
+
+static u32 rtl8187se_rf_readreg(struct ieee80211_hw *dev, u8 addr)
+{
+	u32 dataread = addr & 0x0F;
+	rtl8187se_three_wire_io(dev, (u8 *)&dataread, 16, 0);
+	return dataread;
+}
+
+static void rtl8187se_rf_writereg(struct ieee80211_hw *dev, u8 addr, u32 data)
+{
+	u32 outdata = (data << 4) | (u32)(addr & 0x0F);
+	rtl8187se_three_wire_io(dev, (u8 *)&outdata, 16, 1);
+}
+
+
+static void rtl8225se_write_zebra_agc(struct ieee80211_hw *dev)
+{
+	int i;
+
+	for (i = 0; i < 128; i++) {
+		rtl8225se_write_phy_ofdm(dev, 0xF, ZEBRA_AGC[i]);
+		rtl8225se_write_phy_ofdm(dev, 0xE, i+0x80);
+		rtl8225se_write_phy_ofdm(dev, 0xE, 0);
+	}
+}
+
+static void rtl8187se_write_ofdm_config(struct ieee80211_hw *dev)
+{
+	/* write OFDM_CONFIG table */
+	int i;
+
+	for (i = 0; i < 60; i++)
+		rtl8225se_write_phy_ofdm(dev, i, OFDM_CONFIG[i]);
+
+}
+
+static void rtl8225sez2_rf_set_tx_power(struct ieee80211_hw *dev, int channel)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	u8 cck_power, ofdm_power;
+
+	cck_power = priv->channels[channel - 1].hw_value & 0xFF;
+	if (cck_power > 35)
+		cck_power = 35;
+	rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK,
+			 cck_ofdm_gain_settings[cck_power]);
+
+	usleep_range(1000, 5000);
+	ofdm_power = priv->channels[channel - 1].hw_value >> 8;
+	if (ofdm_power > 35)
+		ofdm_power = 35;
+
+	rtl818x_iowrite8(priv, &priv->map->TX_GAIN_OFDM,
+			 cck_ofdm_gain_settings[ofdm_power]);
+	if (ofdm_power < 12) {
+		rtl8225se_write_phy_ofdm(dev, 7, 0x5C);
+		rtl8225se_write_phy_ofdm(dev, 9, 0x5C);
+	}
+	if (ofdm_power < 18) {
+		rtl8225se_write_phy_ofdm(dev, 7, 0x54);
+		rtl8225se_write_phy_ofdm(dev, 9, 0x54);
+	} else {
+		rtl8225se_write_phy_ofdm(dev, 7, 0x50);
+		rtl8225se_write_phy_ofdm(dev, 9, 0x50);
+	}
+
+	usleep_range(1000, 5000);
+}
+
+static void rtl8187se_write_rf_gain(struct ieee80211_hw *dev)
+{
+	int i;
+
+	for (i = 0; i <= 36; i++) {
+		rtl8187se_rf_writereg(dev, 0x01, i); mdelay(1);
+		rtl8187se_rf_writereg(dev, 0x02, RF_GAIN_TABLE[i]); mdelay(1);
+	}
+}
+
+static void rtl8187se_write_initial_gain(struct ieee80211_hw *dev,
+					int init_gain)
+{
+	switch (init_gain) {
+	default:
+		rtl8225se_write_phy_ofdm(dev, 0x17, 0x26); mdelay(1);
+		rtl8225se_write_phy_ofdm(dev, 0x24, 0x86); mdelay(1);
+		rtl8225se_write_phy_ofdm(dev, 0x05, 0xFA); mdelay(1);
+		break;
+	case 2:
+		rtl8225se_write_phy_ofdm(dev, 0x17, 0x36); mdelay(1);
+		rtl8225se_write_phy_ofdm(dev, 0x24, 0x86); mdelay(1);
+		rtl8225se_write_phy_ofdm(dev, 0x05, 0xFA); mdelay(1);
+		break;
+	case 3:
+		rtl8225se_write_phy_ofdm(dev, 0x17, 0x36); mdelay(1);
+		rtl8225se_write_phy_ofdm(dev, 0x24, 0x86); mdelay(1);
+		rtl8225se_write_phy_ofdm(dev, 0x05, 0xFB); mdelay(1);
+		break;
+	case 4:
+		rtl8225se_write_phy_ofdm(dev, 0x17, 0x46); mdelay(1);
+		rtl8225se_write_phy_ofdm(dev, 0x24, 0x86); mdelay(1);
+		rtl8225se_write_phy_ofdm(dev, 0x05, 0xFB); mdelay(1);
+		break;
+	case 5:
+		rtl8225se_write_phy_ofdm(dev, 0x17, 0x46); mdelay(1);
+		rtl8225se_write_phy_ofdm(dev, 0x24, 0x96); mdelay(1);
+		rtl8225se_write_phy_ofdm(dev, 0x05, 0xFB); mdelay(1);
+		break;
+	case 6:
+		rtl8225se_write_phy_ofdm(dev, 0x17, 0x56); mdelay(1);
+		rtl8225se_write_phy_ofdm(dev, 0x24, 0x96); mdelay(1);
+		rtl8225se_write_phy_ofdm(dev, 0x05, 0xFC); mdelay(1);
+		break;
+	case 7:
+		rtl8225se_write_phy_ofdm(dev, 0x17, 0x56); mdelay(1);
+		rtl8225se_write_phy_ofdm(dev, 0x24, 0xA6); mdelay(1);
+		rtl8225se_write_phy_ofdm(dev, 0x05, 0xFC); mdelay(1);
+		break;
+	case 8:
+		rtl8225se_write_phy_ofdm(dev, 0x17, 0x66); mdelay(1);
+		rtl8225se_write_phy_ofdm(dev, 0x24, 0xB6); mdelay(1);
+		rtl8225se_write_phy_ofdm(dev, 0x05, 0xFC); mdelay(1);
+		break;
+	}
+}
+
+void rtl8225se_rf_init(struct ieee80211_hw *dev)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	u32 rf23, rf24;
+	u8 d_cut = 0;
+	u8 tmp;
+
+	/* Page 1 */
+	rtl8187se_rf_writereg(dev, 0x00, 0x013F); mdelay(1);
+	rf23 = rtl8187se_rf_readreg(dev, 0x08); mdelay(1);
+	rf24 = rtl8187se_rf_readreg(dev, 0x09); mdelay(1);
+	if (rf23 == 0x0818 && rf24 == 0x070C)
+		d_cut = 1;
+
+	wiphy_info(dev->wiphy, "RTL8225-SE version %s\n",
+		d_cut ? "D" : "not-D");
+
+	/* Page 0: reg 0 - 15 */
+	rtl8187se_rf_writereg(dev, 0x00, 0x009F); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x01, 0x06E0); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x02, 0x004D); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x03, 0x07F1); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x04, 0x0975); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x05, 0x0C72); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x06, 0x0AE6); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x07, 0x00CA); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x08, 0x0E1C); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x09, 0x02F0); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x0A, 0x09D0); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x0B, 0x01BA); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x0C, 0x0640); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x0D, 0x08DF); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x0E, 0x0020); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x0F, 0x0990); mdelay(1);
+	/* page 1: reg 16-30 */
+	rtl8187se_rf_writereg(dev, 0x00, 0x013F); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x03, 0x0806); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x04, 0x03A7); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x05, 0x059B); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x06, 0x0081); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x07, 0x01A0); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x0A, 0x0001); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x0B, 0x0418); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x0C, 0x0FBE); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x0D, 0x0008); mdelay(1);
+	if (d_cut)
+		rtl8187se_rf_writereg(dev, 0x0E, 0x0807);
+	else
+		rtl8187se_rf_writereg(dev, 0x0E, 0x0806);
+	mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x0F, 0x0ACC); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x00, 0x01D7); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x03, 0x0E00); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x04, 0x0E50); mdelay(1);
+
+	rtl8187se_write_rf_gain(dev);
+
+	rtl8187se_rf_writereg(dev, 0x05, 0x0203); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x06, 0x0200); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x00, 0x0137); mdelay(11);
+	rtl8187se_rf_writereg(dev, 0x0D, 0x0008); mdelay(11);
+	rtl8187se_rf_writereg(dev, 0x00, 0x0037); mdelay(11);
+	rtl8187se_rf_writereg(dev, 0x04, 0x0160); mdelay(11);
+	rtl8187se_rf_writereg(dev, 0x07, 0x0080); mdelay(11);
+	rtl8187se_rf_writereg(dev, 0x02, 0x088D); mdelay(221);
+	rtl8187se_rf_writereg(dev, 0x00, 0x0137); mdelay(11);
+	rtl8187se_rf_writereg(dev, 0x07, 0x0000); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x07, 0x0180); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x07, 0x0220); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x07, 0x03E0); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x06, 0x00C1); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x0A, 0x0001); mdelay(1);
+	if (priv->xtal_cal) {
+		tmp = (priv->xtal_in << 4) | (priv->xtal_out << 1) |
+		      (1 << 11) | (1 << 9);
+		rtl8187se_rf_writereg(dev, 0x0F, tmp);
+		wiphy_info(dev->wiphy, "Xtal cal\n");
+		mdelay(1);
+	} else {
+		wiphy_info(dev->wiphy, "NO Xtal cal\n");
+		rtl8187se_rf_writereg(dev, 0x0F, 0x0ACC);
+		mdelay(1);
+	}
+	/* page 0 */
+	rtl8187se_rf_writereg(dev, 0x00, 0x00BF); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x0D, 0x08DF); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x02, 0x004D); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x04, 0x0975); mdelay(31);
+	rtl8187se_rf_writereg(dev, 0x00, 0x0197); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x05, 0x05AB); mdelay(1);
+
+	rtl8187se_rf_writereg(dev, 0x00, 0x009F); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x01, 0x0000); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x02, 0x0000); mdelay(1);
+	/* power save parameters */
+	/* TODO: move to dev.c */
+	rtl818x_iowrite8(priv, REG_ADDR1(0x024E),
+		 rtl818x_ioread8(priv, REG_ADDR1(0x24E)) & 0x9F);
+	rtl8225se_write_phy_cck(dev, 0x00, 0xC8);
+	rtl8225se_write_phy_cck(dev, 0x06, 0x1C);
+	rtl8225se_write_phy_cck(dev, 0x10, 0x78);
+	rtl8225se_write_phy_cck(dev, 0x2E, 0xD0);
+	rtl8225se_write_phy_cck(dev, 0x2F, 0x06);
+	rtl8225se_write_phy_cck(dev, 0x01, 0x46);
+
+	/* power control */
+	rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK, 0x10);
+	rtl818x_iowrite8(priv, &priv->map->TX_GAIN_OFDM, 0x1B);
+
+	rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03);
+	rtl8225se_write_phy_ofdm(dev, 0x00, 0x12);
+
+	rtl8225se_write_zebra_agc(dev);
+
+	rtl8225se_write_phy_ofdm(dev, 0x10, 0x00);
+
+	rtl8187se_write_ofdm_config(dev);
+
+	/* turn on RF */
+	rtl8187se_rf_writereg(dev, 0x00, 0x009F); udelay(500);
+	rtl8187se_rf_writereg(dev, 0x04, 0x0972); udelay(500);
+	/* turn on RF again */
+	rtl8187se_rf_writereg(dev, 0x00, 0x009F); udelay(500);
+	rtl8187se_rf_writereg(dev, 0x04, 0x0972); udelay(500);
+	/* turn on BB */
+	rtl8225se_write_phy_ofdm(dev, 0x10, 0x40);
+	rtl8225se_write_phy_ofdm(dev, 0x12, 0x40);
+
+	rtl8187se_write_initial_gain(dev, 4);
+}
+
+void rtl8225se_rf_stop(struct ieee80211_hw *dev)
+{
+	/* checked for 8187se */
+	struct rtl8180_priv *priv = dev->priv;
+
+	/* turn off BB RXIQ matrix to cut off rx signal */
+	rtl8225se_write_phy_ofdm(dev, 0x10, 0x00);
+	rtl8225se_write_phy_ofdm(dev, 0x12, 0x00);
+	/* turn off RF */
+	rtl8187se_rf_writereg(dev, 0x04, 0x0000);
+	rtl8187se_rf_writereg(dev, 0x00, 0x0000);
+
+	usleep_range(1000, 5000);
+	/* turn off A/D and D/A */
+	rtl8180_set_anaparam(priv, RTL8225SE_ANAPARAM_OFF);
+	rtl8180_set_anaparam2(priv, RTL8225SE_ANAPARAM2_OFF);
+}
+
+void rtl8225se_rf_set_channel(struct ieee80211_hw *dev,
+				   struct ieee80211_conf *conf)
+{
+	int chan =
+		ieee80211_frequency_to_channel(conf->chandef.chan->center_freq);
+
+	rtl8225sez2_rf_set_tx_power(dev, chan);
+	rtl8187se_rf_writereg(dev, 0x7, rtl8225se_chan[chan - 1]);
+	if ((rtl8187se_rf_readreg(dev, 0x7) & 0x0F80) !=
+		rtl8225se_chan[chan - 1])
+		rtl8187se_rf_writereg(dev, 0x7, rtl8225se_chan[chan - 1]);
+	usleep_range(10000, 20000);
+}
+
+static const struct rtl818x_rf_ops rtl8225se_ops = {
+	.name		= "rtl8225-se",
+	.init		= rtl8225se_rf_init,
+	.stop		= rtl8225se_rf_stop,
+	.set_chan	= rtl8225se_rf_set_channel,
+};
+
+const struct rtl818x_rf_ops *rtl8187se_detect_rf(struct ieee80211_hw *dev)
+{
+	return &rtl8225se_ops;
+}
diff --git a/drivers/net/wireless/rtl818x/rtl8180/rtl8225se.h b/drivers/net/wireless/rtl818x/rtl8180/rtl8225se.h
new file mode 100644
index 000000000000..229400264088
--- /dev/null
+++ b/drivers/net/wireless/rtl818x/rtl8180/rtl8225se.h
@@ -0,0 +1,61 @@
+
+/* Definitions for RTL8187SE hardware
+ *
+ * Copyright 2009 Larry Finger <Larry.Finger@lwfinger.net>
+ * Copyright 2014 Andrea Merello <andrea.merello@gmail.com>
+ *
+ * Based on the r8180 and Realtek r8187se drivers, which are:
+ * Copyright 2004-2005 Andrea Merello <andrea.merello@gmail.com>, et al.
+ *
+ * Also based on the rtl8187 driver, which is:
+ * Copyright 2007 Michael Wu <flamingice@sourmilk.net>
+ * Copyright 2007 Andrea Merello <andrea.merello@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef RTL8187SE_RTL8225_H
+#define RTL8187SE_RTL8225_H
+
+#define RTL8225SE_ANAPARAM_ON	0xb0054d00
+#define RTL8225SE_ANAPARAM2_ON	0x000004c6
+
+/* all off except PLL */
+#define RTL8225SE_ANAPARAM_OFF	0xb0054dec
+/* all on including PLL */
+#define RTL8225SE_ANAPARAM_OFF2	0xb0054dfc
+
+#define RTL8225SE_ANAPARAM2_OFF	0x00ff04c6
+
+#define RTL8225SE_ANAPARAM3	0x10
+
+enum rtl8187se_power_state {
+	RTL8187SE_POWER_ON,
+	RTL8187SE_POWER_OFF,
+	RTL8187SE_POWER_SLEEP
+};
+
+static inline void rtl8225se_write_phy_ofdm(struct ieee80211_hw *dev,
+					  u8 addr, u8 data)
+{
+	rtl8180_write_phy(dev, addr, data);
+}
+
+static inline void rtl8225se_write_phy_cck(struct ieee80211_hw *dev,
+					 u8 addr, u8 data)
+{
+	rtl8180_write_phy(dev, addr, data | 0x10000);
+}
+
+
+const struct rtl818x_rf_ops *rtl8187se_detect_rf(struct ieee80211_hw *);
+void rtl8225se_rf_stop(struct ieee80211_hw *dev);
+void rtl8225se_rf_set_channel(struct ieee80211_hw *dev,
+				     struct ieee80211_conf *conf);
+void rtl8225se_rf_conf_erp(struct ieee80211_hw *dev,
+				  struct ieee80211_bss_conf *info);
+void rtl8225se_rf_init(struct ieee80211_hw *dev);
+
+#endif /* RTL8187SE_RTL8225_H */
-- 
cgit v1.2.2


From 4a67aa5d64c9e97289229cb2d0a8931744ccf6a1 Mon Sep 17 00:00:00 2001
From: Andrea Merello <andrea.merello@gmail.com>
Date: Wed, 26 Mar 2014 21:02:46 +0100
Subject: rtl8180: add rtl8187se HW initialization

This patch adds few functions that initializes extra stuff that
is present only in rtl8187se HW, and it modify the existing
HW initialization function where necessary

Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl8180/dev.c | 168 +++++++++++++++++++++++++++--
 1 file changed, 159 insertions(+), 9 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c
index 1c4a1485f4b7..80618525ac78 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c
@@ -578,6 +578,75 @@ void rtl8180_set_anaparam(struct rtl8180_priv *priv, u32 anaparam)
 	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
 }
 
+static void rtl8187se_mac_config(struct ieee80211_hw *dev)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	u8 reg;
+
+	rtl818x_iowrite32(priv, REG_ADDR4(0x1F0), 0);
+	rtl818x_ioread32(priv, REG_ADDR4(0x1F0));
+	rtl818x_iowrite32(priv, REG_ADDR4(0x1F4), 0);
+	rtl818x_ioread32(priv, REG_ADDR4(0x1F4));
+	rtl818x_iowrite8(priv, REG_ADDR1(0x1F8), 0);
+	rtl818x_ioread8(priv, REG_ADDR1(0x1F8));
+	/* Enable DA10 TX power saving */
+	reg = rtl818x_ioread8(priv, &priv->map->PHY_PR);
+	rtl818x_iowrite8(priv, &priv->map->PHY_PR, reg | 0x04);
+	/* Power */
+	rtl818x_iowrite16(priv, PI_DATA_REG, 0x1000);
+	rtl818x_iowrite16(priv, SI_DATA_REG, 0x1000);
+	/* AFE - default to power ON */
+	rtl818x_iowrite16(priv, REG_ADDR2(0x370), 0x0560);
+	rtl818x_iowrite16(priv, REG_ADDR2(0x372), 0x0560);
+	rtl818x_iowrite16(priv, REG_ADDR2(0x374), 0x0DA4);
+	rtl818x_iowrite16(priv, REG_ADDR2(0x376), 0x0DA4);
+	rtl818x_iowrite16(priv, REG_ADDR2(0x378), 0x0560);
+	rtl818x_iowrite16(priv, REG_ADDR2(0x37A), 0x0560);
+	rtl818x_iowrite16(priv, REG_ADDR2(0x37C), 0x00EC);
+	rtl818x_iowrite16(priv, REG_ADDR2(0x37E), 0x00EC);
+	rtl818x_iowrite8(priv, REG_ADDR1(0x24E), 0x01);
+	/* unknown, needed for suspend to RAM resume */
+	rtl818x_iowrite8(priv, REG_ADDR1(0x0A), 0x72);
+}
+
+static void rtl8187se_set_antenna_config(struct ieee80211_hw *dev, u8 def_ant,
+					 bool diversity)
+{
+	struct rtl8180_priv *priv = dev->priv;
+
+	rtl8225_write_phy_cck(dev, 0x0C, 0x09);
+	if (diversity) {
+		if (def_ant == 1) {
+			rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x00);
+			rtl8225_write_phy_cck(dev, 0x11, 0xBB);
+			rtl8225_write_phy_cck(dev, 0x01, 0xC7);
+			rtl8225_write_phy_ofdm(dev, 0x0D, 0x54);
+			rtl8225_write_phy_ofdm(dev, 0x18, 0xB2);
+		} else { /* main antenna */
+			rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03);
+			rtl8225_write_phy_cck(dev, 0x11, 0x9B);
+			rtl8225_write_phy_cck(dev, 0x01, 0xC7);
+			rtl8225_write_phy_ofdm(dev, 0x0D, 0x5C);
+			rtl8225_write_phy_ofdm(dev, 0x18, 0xB2);
+		}
+	} else { /* disable antenna diversity */
+		if (def_ant == 1) {
+			rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x00);
+			rtl8225_write_phy_cck(dev, 0x11, 0xBB);
+			rtl8225_write_phy_cck(dev, 0x01, 0x47);
+			rtl8225_write_phy_ofdm(dev, 0x0D, 0x54);
+			rtl8225_write_phy_ofdm(dev, 0x18, 0x32);
+		} else { /* main antenna */
+			rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03);
+			rtl8225_write_phy_cck(dev, 0x11, 0x9B);
+			rtl8225_write_phy_cck(dev, 0x01, 0x47);
+			rtl8225_write_phy_ofdm(dev, 0x0D, 0x5C);
+			rtl8225_write_phy_ofdm(dev, 0x18, 0x32);
+		}
+	}
+	/* priv->curr_ant = def_ant; */
+}
+
 static void rtl8180_int_enable(struct ieee80211_hw *dev)
 {
 	struct rtl8180_priv *priv = dev->priv;
@@ -666,6 +735,7 @@ static int rtl8180_init_hw(struct ieee80211_hw *dev)
 {
 	struct rtl8180_priv *priv = dev->priv;
 	u16 reg;
+	u32 reg32;
 
 	rtl818x_iowrite8(priv, &priv->map->CMD, 0);
 	rtl818x_ioread8(priv, &priv->map->CMD);
@@ -696,14 +766,36 @@ static int rtl8180_init_hw(struct ieee80211_hw *dev)
 		rtl8180_config_cardbus(dev);
 	}
 
-	rtl818x_iowrite8(priv, &priv->map->MSR, 0);
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE)
+		rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_ENEDCA);
+	else
+		rtl818x_iowrite8(priv, &priv->map->MSR, 0);
 
 	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180)
 		rtl8180_set_anaparam(priv, priv->anaparam);
 
 	rtl818x_iowrite32(priv, &priv->map->RDSAR, priv->rx_ring_dma);
-	rtl818x_iowrite32(priv, &priv->map->TBDA, priv->tx_ring[1].dma);
-	rtl818x_iowrite32(priv, &priv->map->TLPDA, priv->tx_ring[0].dma);
+	/* mac80211 queue have higher prio for lower index. The last queue
+	 * (that mac80211 is not aware of) is reserved for beacons (and have
+	 * the highest priority on the NIC)
+	 */
+	if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8187SE) {
+		rtl818x_iowrite32(priv, &priv->map->TBDA,
+				  priv->tx_ring[1].dma);
+		rtl818x_iowrite32(priv, &priv->map->TLPDA,
+				  priv->tx_ring[0].dma);
+	} else {
+		rtl818x_iowrite32(priv, &priv->map->TBDA,
+				  priv->tx_ring[4].dma);
+		rtl818x_iowrite32(priv, &priv->map->TVODA,
+				  priv->tx_ring[0].dma);
+		rtl818x_iowrite32(priv, &priv->map->TVIDA,
+				  priv->tx_ring[1].dma);
+		rtl818x_iowrite32(priv, &priv->map->TBEDA,
+				  priv->tx_ring[2].dma);
+		rtl818x_iowrite32(priv, &priv->map->TBKDA,
+				  priv->tx_ring[3].dma);
+	}
 
 	/* TODO: necessary? specs indicate not */
 	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
@@ -724,7 +816,14 @@ static int rtl8180_init_hw(struct ieee80211_hw *dev)
 	if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180) {
 		rtl818x_iowrite8(priv, &priv->map->WPA_CONF, 0);
 		rtl818x_iowrite8(priv, &priv->map->RATE_FALLBACK, 0x81);
+	} else {
+		rtl818x_iowrite8(priv, &priv->map->SECURITY, 0);
+
+		rtl818x_iowrite8(priv, &priv->map->PHY_DELAY, 0x6);
+		rtl818x_iowrite8(priv, &priv->map->CARRIER_SENSE_COUNTER, 0x4C);
+	}
 
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8185) {
 		/* TODO: set ClkRun enable? necessary? */
 		reg = rtl818x_ioread8(priv, &priv->map->GP_ENABLE);
 		rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, reg & ~(1 << 6));
@@ -732,11 +831,55 @@ static int rtl8180_init_hw(struct ieee80211_hw *dev)
 		reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
 		rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | (1 << 2));
 		rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
-	} else {
-		rtl818x_iowrite8(priv, &priv->map->SECURITY, 0);
+	}
 
-		rtl818x_iowrite8(priv, &priv->map->PHY_DELAY, 0x6);
-		rtl818x_iowrite8(priv, &priv->map->CARRIER_SENSE_COUNTER, 0x4C);
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
+
+		/* the set auto rate fallback bitmask from 1M to 54 Mb/s */
+		rtl818x_iowrite16(priv, ARFR, 0xFFF);
+		rtl818x_ioread16(priv, ARFR);
+
+		/* stop unused queus (no dma alloc) */
+		rtl818x_iowrite8(priv, &priv->map->TPPOLL_STOP,
+			       RTL818x_TPPOLL_STOP_MG | RTL818x_TPPOLL_STOP_HI);
+
+		rtl818x_iowrite8(priv, &priv->map->ACM_CONTROL, 0x00);
+		rtl818x_iowrite16(priv, &priv->map->TID_AC_MAP, 0xFA50);
+
+		rtl818x_iowrite16(priv, &priv->map->INT_MIG, 0);
+
+		/* some black magic here.. */
+		rtl8187se_mac_config(dev);
+
+		rtl818x_iowrite16(priv, RFSW_CTRL, 0x569A);
+		rtl818x_ioread16(priv, RFSW_CTRL);
+
+		rtl8180_set_anaparam(priv, RTL8225SE_ANAPARAM_ON);
+		rtl8180_set_anaparam2(priv, RTL8225SE_ANAPARAM2_ON);
+		rtl8180_set_anaparam3(priv, RTL8225SE_ANAPARAM3);
+
+
+		rtl818x_iowrite8(priv, &priv->map->CONFIG5,
+			    rtl818x_ioread8(priv, &priv->map->CONFIG5) & 0x7F);
+
+		/*probably this switch led on */
+		rtl818x_iowrite8(priv, &priv->map->PGSELECT,
+			    rtl818x_ioread8(priv, &priv->map->PGSELECT) | 0x08);
+
+		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x0480);
+		rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1BFF);
+		rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x2488);
+
+		rtl818x_iowrite32(priv, &priv->map->RF_TIMING, 0x4003);
+
+		/* the reference code mac hardcode table write
+		 * this reg by doing byte-wide accesses.
+		 * It does it just for lowest and highest byte..
+		 */
+		reg32 = rtl818x_ioread32(priv, &priv->map->RF_PARA);
+		reg32 &= 0x00ffff00;
+		reg32 |= 0xb8000054;
+		rtl818x_iowrite32(priv, &priv->map->RF_PARA, reg32);
 	}
 
 	priv->rf->init(dev);
@@ -752,6 +895,10 @@ static int rtl8180_init_hw(struct ieee80211_hw *dev)
 	else
 		rtl8180_conf_basic_rates(dev, 0x1f3);
 
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE)
+		rtl8187se_set_antenna_config(dev,
+					     priv->antenna_diversity_default,
+					     priv->antenna_diversity_en);
 	return 0;
 }
 
@@ -926,11 +1073,13 @@ static int rtl8180_start(struct ieee80211_hw *dev)
 
 	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8185)
 		reg |= RTL818X_RX_CONF_CSDM1 | RTL818X_RX_CONF_CSDM2;
-	else {
+	else if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180) {
 		reg |= (priv->rfparam & RF_PARAM_CARRIERSENSE1)
 			? RTL818X_RX_CONF_CSDM1 : 0;
 		reg |= (priv->rfparam & RF_PARAM_CARRIERSENSE2)
 			? RTL818X_RX_CONF_CSDM2 : 0;
+	} else {
+		reg &= ~(RTL818X_RX_CONF_CSDM1 | RTL818X_RX_CONF_CSDM2);
 	}
 
 	priv->rx_conf = reg;
@@ -968,7 +1117,8 @@ static int rtl8180_start(struct ieee80211_hw *dev)
 	reg |= (6 << 21 /* MAX TX DMA */) |
 	       RTL818X_TX_CONF_NO_ICV;
 
-
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE)
+		reg |= 1<<30;  /*  "duration procedure mode" */
 
 	if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180)
 		reg &= ~RTL818X_TX_CONF_PROBE_DTS;
-- 
cgit v1.2.2


From 355668d23a99acb45fefd7aeee8e0881e953e432 Mon Sep 17 00:00:00 2001
From: Andrea Merello <andrea.merello@gmail.com>
Date: Wed, 26 Mar 2014 21:03:03 +0100
Subject: rtl8180: add ERP configuration for rtl8187se

This patch adds ERP configuration support for rtl8187se to the
existing ERP configuration function.
It needs a different register offset and it must not apply
rtl8185 workaround.

Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl8180/dev.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c
index 80618525ac78..6f9da01a9096 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c
@@ -1336,13 +1336,17 @@ static void rtl8180_conf_erp(struct ieee80211_hw *dev,
 	/* from reference code. set ack timeout reg = eifs reg */
 	rtl818x_iowrite8(priv, &priv->map->CARRIER_SENSE_COUNTER, hw_eifs);
 
-	/* rtl8187/rtl8185 HW bug. After EIFS is elapsed,
-	 * the HW still wait for DIFS.
-	 * HW uses 4uS units for EIFS.
-	 */
-	hw_eifs = DIV_ROUND_UP(eifs - difs, 4);
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE)
+		rtl818x_iowrite8(priv, &priv->map->EIFS_8187SE, hw_eifs);
+	else if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8185) {
+		/* rtl8187/rtl8185 HW bug. After EIFS is elapsed,
+		 * the HW still wait for DIFS.
+		 * HW uses 4uS units for EIFS.
+		 */
+		hw_eifs = DIV_ROUND_UP(eifs - difs, 4);
 
-	rtl818x_iowrite8(priv, &priv->map->EIFS, hw_eifs);
+		rtl818x_iowrite8(priv, &priv->map->EIFS, hw_eifs);
+	}
 }
 
 static void rtl8180_bss_info_changed(struct ieee80211_hw *dev,
-- 
cgit v1.2.2


From 833d15ad01acf14f4c0c8815525eda6a162cb137 Mon Sep 17 00:00:00 2001
From: Andrea Merello <andrea.merello@gmail.com>
Date: Wed, 26 Mar 2014 21:03:17 +0100
Subject: rtl8180: make sure RTL818X_MSR_ENEDCA is set for rtl8187se

MSR register for rtl8187se must always have ENEDCA flag set.
Write it accordingly when updated on BSS change.

Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl8180/dev.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c
index 6f9da01a9096..eb678dae1653 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c
@@ -1373,6 +1373,10 @@ static void rtl8180_bss_info_changed(struct ieee80211_hw *dev,
 				reg = RTL818X_MSR_INFRA;
 		} else
 			reg = RTL818X_MSR_NO_LINK;
+
+		if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE)
+			reg |= RTL818X_MSR_ENEDCA;
+
 		rtl818x_iowrite8(priv, &priv->map->MSR, reg);
 	}
 
-- 
cgit v1.2.2


From e944b0af86d8fdcdd91abbe92338bda402a292b5 Mon Sep 17 00:00:00 2001
From: Andrea Merello <andrea.merello@gmail.com>
Date: Wed, 26 Mar 2014 21:03:40 +0100
Subject: rtl8180: add WMM parameters configuration for rtl8187se

Introduce a new function to configure AC parameters for TX queues
on rtl8187se cards, and hook it onto mac80211 in order to enable
WMM support.

Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl8180/dev.c     | 62 +++++++++++++++++++++++++-
 drivers/net/wireless/rtl818x/rtl8180/rtl8180.h |  1 +
 2 files changed, 61 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c
index eb678dae1653..a14dfd931fa4 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c
@@ -1090,6 +1090,7 @@ static int rtl8180_start(struct ieee80211_hw *dev)
 
 		/* CW is not on per-packet basis.
 		 * in rtl8185 the CW_VALUE reg is used.
+		 * in rtl8187se the AC param regs are used.
 		 */
 		reg &= ~RTL818X_CW_CONF_PERPACKET_CW;
 		/* retry limit IS on per-packet basis.
@@ -1279,6 +1280,49 @@ static int rtl8180_config(struct ieee80211_hw *dev, u32 changed)
 	return 0;
 }
 
+static void rtl8187se_conf_ac_parm(struct ieee80211_hw *dev, u8 queue)
+{
+	const struct ieee80211_tx_queue_params *params;
+	struct rtl8180_priv *priv = dev->priv;
+
+	/* hw value */
+	u32 ac_param;
+
+	u8 aifs;
+	u8 txop;
+	u8 cw_min, cw_max;
+
+	params = &priv->queue_param[queue];
+
+	cw_min = fls(params->cw_min);
+	cw_max = fls(params->cw_max);
+
+	aifs = 10 + params->aifs * priv->slot_time;
+
+	/* TODO: check if txop HW is in us (mult by 32) */
+	txop = params->txop;
+
+	ac_param = txop << AC_PARAM_TXOP_LIMIT_SHIFT |
+		cw_max << AC_PARAM_ECW_MAX_SHIFT |
+		cw_min << AC_PARAM_ECW_MIN_SHIFT |
+		aifs << AC_PARAM_AIFS_SHIFT;
+
+	switch (queue) {
+	case IEEE80211_AC_BK:
+		rtl818x_iowrite32(priv, &priv->map->AC_BK_PARAM, ac_param);
+		break;
+	case IEEE80211_AC_BE:
+		rtl818x_iowrite32(priv, &priv->map->AC_BE_PARAM, ac_param);
+		break;
+	case IEEE80211_AC_VI:
+		rtl818x_iowrite32(priv, &priv->map->AC_VI_PARAM, ac_param);
+		break;
+	case IEEE80211_AC_VO:
+		rtl818x_iowrite32(priv, &priv->map->AC_VO_PARAM, ac_param);
+		break;
+	}
+}
+
 static int rtl8180_conf_tx(struct ieee80211_hw *dev,
 			    struct ieee80211_vif *vif, u16 queue,
 			    const struct ieee80211_tx_queue_params *params)
@@ -1293,8 +1337,12 @@ static int rtl8180_conf_tx(struct ieee80211_hw *dev,
 	cw_min = fls(params->cw_min);
 	cw_max = fls(params->cw_max);
 
-	rtl818x_iowrite8(priv, &priv->map->CW_VAL, (cw_max << 4) | cw_min);
-
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
+		priv->queue_param[queue] = *params;
+		rtl8187se_conf_ac_parm(dev, queue);
+	} else
+		rtl818x_iowrite8(priv, &priv->map->CW_VAL,
+				 (cw_max << 4) | cw_min);
 	return 0;
 }
 
@@ -1396,6 +1444,16 @@ static void rtl8180_bss_info_changed(struct ieee80211_hw *dev,
 					&priv->rates[0])) - 10;
 
 		rtl8180_conf_erp(dev, info);
+
+		/* mac80211 supplies aifs_n to driver and calls
+		 * conf_tx callback whether aifs_n changes, NOT
+		 * when aifs changes.
+		 * Aifs should be recalculated if slot changes.
+		 */
+		if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
+			for (i = 0; i < 4; i++)
+				rtl8187se_conf_ac_parm(dev, i);
+		}
 	}
 
 	if (changed & BSS_CHANGED_BEACON_ENABLED)
diff --git a/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h b/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
index 0ef3fc758928..291a55970d1a 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
+++ b/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
@@ -117,6 +117,7 @@ struct rtl8180_priv {
 	struct ieee80211_channel channels[14];
 	struct ieee80211_rate rates[12];
 	struct ieee80211_supported_band band;
+	struct ieee80211_tx_queue_params queue_param[4];
 	struct pci_dev *pdev;
 	u32 rx_conf;
 	u8 slot_time;
-- 
cgit v1.2.2


From 24b5fbf9d85cae3c9a320d23bddedd23a487db42 Mon Sep 17 00:00:00 2001
From: Andrea Merello <andrea.merello@gmail.com>
Date: Wed, 26 Mar 2014 21:04:05 +0100
Subject: rtl8180: detect rtl8187se card

Add case to detect the rtl8187se card and its RF frontend.
In this case set also accordingly mac80211 queue number.

Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl8180/dev.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c
index a14dfd931fa4..2046fe2f1065 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c
@@ -1740,6 +1740,12 @@ static int rtl8180_probe(struct pci_dev *pdev,
 		chip_name = "RTL8185vD";
 		priv->chip_family = RTL818X_CHIP_FAMILY_RTL8185;
 		break;
+
+	case RTL818X_TX_CONF_RTL8187SE:
+		chip_name = "RTL8187SE";
+		priv->chip_family = RTL818X_CHIP_FAMILY_RTL8187SE;
+		break;
+
 	default:
 		printk(KERN_ERR "%s (rtl8180): Unknown chip! (0x%x)\n",
 		       pci_name(pdev), reg >> 25);
@@ -1753,7 +1759,10 @@ static int rtl8180_probe(struct pci_dev *pdev,
 	 * with mac80211, however the beacon queue is an exception and it
 	 * is mapped on the highst tx ring IDX.
 	 */
-	dev->queues = RTL8180_NR_TX_QUEUES - 1;
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE)
+		dev->queues = RTL8187SE_NR_TX_QUEUES - 1;
+	else
+		dev->queues = RTL8180_NR_TX_QUEUES - 1;
 
 	if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180) {
 		priv->band.n_bitrates = ARRAY_SIZE(rtl818x_rates);
@@ -1773,7 +1782,11 @@ static int rtl8180_probe(struct pci_dev *pdev,
 		break;
 	case 5:	priv->rf = &grf5101_rf_ops;
 		break;
-	case 9:	priv->rf = rtl8180_detect_rf(dev);
+	case 9:
+		if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE)
+			priv->rf = rtl8187se_detect_rf(dev);
+		else
+			priv->rf = rtl8180_detect_rf(dev);
 		break;
 	case 10:
 		rf_name = "RTL8255";
-- 
cgit v1.2.2


From 1eba648f998ef9c31b8cf062754a4a7b4ab9001f Mon Sep 17 00:00:00 2001
From: Andrea Merello <andrea.merello@gmail.com>
Date: Wed, 26 Mar 2014 21:04:23 +0100
Subject: rtl8180: enable rtl8187se support

Finally make rtl8187se works (hopefylly).
This patch adds PCI ID for rtl8187, updates copyright notes and
updates MODULE_DESCRIPTION.

Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl8180/dev.c | 39 +++++++++++++++++++++++++++---
 1 file changed, 35 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c
index 2046fe2f1065..98d8256f0377 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c
@@ -1,15 +1,42 @@
 
-/*
- * Linux device driver for RTL8180 / RTL8185
+/* Linux device driver for RTL8180 / RTL8185 / RTL8187SE
  *
  * Copyright 2007 Michael Wu <flamingice@sourmilk.net>
- * Copyright 2007 Andrea Merello <andrea.merello@gmail.com>
+ * Copyright 2007,2014 Andrea Merello <andrea.merello@gmail.com>
  *
  * Based on the r8180 driver, which is:
  * Copyright 2004-2005 Andrea Merello <andrea.merello@gmail.com>, et al.
  *
  * Thanks to Realtek for their support!
  *
+ ************************************************************************
+ *
+ * The driver was extended to the RTL8187SE in 2014 by
+ * Andrea Merello <andrea.merello@gmail.com>
+ *
+ * based also on:
+ *  - portions of rtl8187se Linux staging driver, Copyright Realtek corp.
+ *  - other GPL, unpublished (until now), Linux driver code,
+ *    Copyright Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ * A huge thanks goes to Sara V. Nari who forgives me when I'm
+ * sitting in front of my laptop at evening, week-end, night...
+ *
+ * A special thanks goes to Antonio Cuni, who helped me with
+ * some python userspace stuff I used to debug RTL8187SE code, and who
+ * bought a laptop with an unsupported Wi-Fi card some years ago...
+ *
+ * Thanks to Larry Finger for writing some code for rtl8187se and for
+ * his suggestions.
+ *
+ * Thanks to Dan Carpenter for reviewing my initial patch and for his
+ * suggestions.
+ *
+ * Thanks to Bernhard Schiffner for his help in testing and for his
+ * suggestions.
+ *
+ ************************************************************************
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -33,10 +60,14 @@
 
 MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>");
 MODULE_AUTHOR("Andrea Merello <andrea.merello@gmail.com>");
-MODULE_DESCRIPTION("RTL8180 / RTL8185 PCI wireless driver");
+MODULE_DESCRIPTION("RTL8180 / RTL8185 / RTL8187SE PCI wireless driver");
 MODULE_LICENSE("GPL");
 
 static DEFINE_PCI_DEVICE_TABLE(rtl8180_table) = {
+
+	/* rtl8187se */
+	{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8199) },
+
 	/* rtl8185 */
 	{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8185) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BELKIN, 0x700f) },
-- 
cgit v1.2.2


From 9d2ffb81608da30c3293fb7e20474358a5951cca Mon Sep 17 00:00:00 2001
From: Andrea Merello <andrea.merello@gmail.com>
Date: Wed, 26 Mar 2014 21:04:37 +0100
Subject: rtl818x: Update Kconfig for rtl8187se

update description in Kconfig to state rtl8180 driver
now supports also rtl8187se cards

Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/Kconfig | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtl818x/Kconfig b/drivers/net/wireless/rtl818x/Kconfig
index 30332175bcd8..1ce1d55f0010 100644
--- a/drivers/net/wireless/rtl818x/Kconfig
+++ b/drivers/net/wireless/rtl818x/Kconfig
@@ -2,11 +2,11 @@
 # RTL818X Wireless LAN device configuration
 #
 config RTL8180
-	tristate "Realtek 8180/8185 PCI support"
+	tristate "Realtek 8180/8185/8187SE PCI support"
 	depends on MAC80211 && PCI
 	select EEPROM_93CX6
 	---help---
-	  This is a driver for RTL8180 and RTL8185 based cards.
+	  This is a driver for RTL8180, RTL8185 and RTL8187SE based cards.
 	  These are PCI based chips found in cards such as:
 
 	  (RTL8185 802.11g)
-- 
cgit v1.2.2


From 19915f53af472e97d67a43b7b43f50af2830a1a8 Mon Sep 17 00:00:00 2001
From: Yuval Mintz <Yuval.Mintz@qlogic.com>
Date: Wed, 26 Mar 2014 09:06:29 +0200
Subject: bnx2x: Fix compilation when CONFIG_BNX2X_SRIOV is not set

Commit 370d4a26 "bnx2x: Create workqueue for IOV related tasks" breaks bnx2x
compilation when CONFIG_BNX2X_SRIOV is not set - "multiple definition of
`bnx2x_schedule_iov_task'".

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h
index db73a247ecfb..8bf764570eef 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h
@@ -574,7 +574,7 @@ static inline int bnx2x_sriov_configure(struct pci_dev *dev, int num_vfs) {retur
 static inline void bnx2x_iov_channel_down(struct bnx2x *bp) {}
 
 static inline void bnx2x_iov_task(struct work_struct *work) {}
-void bnx2x_schedule_iov_task(struct bnx2x *bp, enum bnx2x_iov_flag flag) {}
+static inline void bnx2x_schedule_iov_task(struct bnx2x *bp, enum bnx2x_iov_flag flag) {}
 
 #endif /* CONFIG_BNX2X_SRIOV */
 #endif /* bnx2x_sriov.h */
-- 
cgit v1.2.2


From d3be267d359f621782010cd4fe4e70c9ec1cd24d Mon Sep 17 00:00:00 2001
From: Julia Lawall <Julia.Lawall@lip6.fr>
Date: Wed, 26 Mar 2014 22:33:45 +0100
Subject: yam: replace del_timer by del_timer_sync

Use del_timer_sync to ensure that the timer is stopped on all CPUs before
the driver exists.

This change was suggested by Thomas Gleixner

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r@
declarer name module_exit;
identifier ex;
@@

module_exit(ex);

@@
identifier r.ex;
@@

ex(...) {
  <...
- del_timer
+ del_timer_sync
    (...)
  ...>
}
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/hamradio/yam.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/hamradio/yam.c b/drivers/net/hamradio/yam.c
index 61dd2447e1bb..81901659cc9e 100644
--- a/drivers/net/hamradio/yam.c
+++ b/drivers/net/hamradio/yam.c
@@ -1184,7 +1184,7 @@ static void __exit yam_cleanup_driver(void)
 	struct yam_mcs *p;
 	int i;
 
-	del_timer(&yam_timer);
+	del_timer_sync(&yam_timer);
 	for (i = 0; i < NR_PORTS; i++) {
 		struct net_device *dev = yam_devs[i];
 		if (dev) {
-- 
cgit v1.2.2


From ebe5e3c64241bbdc256e9828392fa452bc2bfd7e Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Wed, 26 Mar 2014 21:18:39 -0700
Subject: net: bcmgenet: set RBUF_SKIP_FCS based on UniMAC CRC forwarding

When the UniMAC block is configured to forward the CRC as part of the
Ethernet frame (priv->crc_fwd_en, set by default), enabling the hardware
RX checksum block unveiled that the dma_rxchk_bit was never set in the
per-packet status bits (dma_flag in bcmgenet_desc_rx). This would make
the chksum_ok variable to be never set to 1, and the networking stack
would have to compute the packet checksums, which takes a substantial
amount of time.

In order for the RXCHK block to properly compute the packet checksum in
hardware, we also need to set the RBUF_SKIP_FCS bit accordingly.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/genet/bcmgenet.c | 9 +++++++++
 1 file changed, 9 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index 8f87fe001541..adf8acbddf56 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -416,6 +416,15 @@ static int bcmgenet_set_rx_csum(struct net_device *dev,
 	else
 		rbuf_chk_ctrl &= ~RBUF_RXCHK_EN;
 	priv->desc_rxchk_en = rx_csum_en;
+
+	/* If UniMAC forwards CRC, we need to skip over it to get
+	 * a valid CHK bit to be set in the per-packet status word
+	*/
+	if (rx_csum_en && priv->crc_fwd_en)
+		rbuf_chk_ctrl |= RBUF_SKIP_FCS;
+	else
+		rbuf_chk_ctrl &= ~RBUF_SKIP_FCS;
+
 	bcmgenet_rbuf_writel(priv, rbuf_chk_ctrl, RBUF_CHK_CTRL);
 
 	return 0;
-- 
cgit v1.2.2


From 1f5533812b5c5cc6be234923fc0af08d61299f4e Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Wed, 26 Mar 2014 18:07:13 -0700
Subject: net: greth: remove empty MDIO bus reset function

greth_mdio_reset() does nothing useful and this function is optional for
the MDIO bus code, so let's just remove it.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/aeroflex/greth.c | 6 ------
 1 file changed, 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/aeroflex/greth.c b/drivers/net/ethernet/aeroflex/greth.c
index c5d75e7aeeb6..23578dfee249 100644
--- a/drivers/net/ethernet/aeroflex/greth.c
+++ b/drivers/net/ethernet/aeroflex/greth.c
@@ -1213,11 +1213,6 @@ static int greth_mdio_write(struct mii_bus *bus, int phy, int reg, u16 val)
 	return 0;
 }
 
-static int greth_mdio_reset(struct mii_bus *bus)
-{
-	return 0;
-}
-
 static void greth_link_change(struct net_device *dev)
 {
 	struct greth_private *greth = netdev_priv(dev);
@@ -1332,7 +1327,6 @@ static int greth_mdio_init(struct greth_private *greth)
 	snprintf(greth->mdio->id, MII_BUS_ID_SIZE, "%s-%d", greth->mdio->name, greth->irq);
 	greth->mdio->read = greth_mdio_read;
 	greth->mdio->write = greth_mdio_write;
-	greth->mdio->reset = greth_mdio_reset;
 	greth->mdio->priv = greth;
 
 	greth->mdio->irq = greth->mdio_irqs;
-- 
cgit v1.2.2


From 7427440b2a7158d047f93bcf2c39472eae88acba Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Wed, 26 Mar 2014 18:07:14 -0700
Subject: tg3: remove empty MDIO bus reset function

tg3_mdio_reset() does nothing useful and is optional for the MDIO bus
code, so let's just remove it.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/tg3.c | 6 ------
 1 file changed, 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index 37422af9ef13..1ac461a7d949 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -1401,11 +1401,6 @@ static int tg3_mdio_write(struct mii_bus *bp, int mii_id, int reg, u16 val)
 	return ret;
 }
 
-static int tg3_mdio_reset(struct mii_bus *bp)
-{
-	return 0;
-}
-
 static void tg3_mdio_config_5785(struct tg3 *tp)
 {
 	u32 val;
@@ -1542,7 +1537,6 @@ static int tg3_mdio_init(struct tg3 *tp)
 	tp->mdio_bus->parent   = &tp->pdev->dev;
 	tp->mdio_bus->read     = &tg3_mdio_read;
 	tp->mdio_bus->write    = &tg3_mdio_write;
-	tp->mdio_bus->reset    = &tg3_mdio_reset;
 	tp->mdio_bus->phy_mask = ~(1 << tp->phy_addr);
 	tp->mdio_bus->irq      = &tp->mdio_irq[0];
 
-- 
cgit v1.2.2


From 5b31f22a8ba56cf24dfbbddba0b5e1f9b9b2e011 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Wed, 26 Mar 2014 18:07:15 -0700
Subject: macb: remove empty MDIO bus reset function

macb_mdio_reset() does nothing useful and is optional for the MDIO bus
code, so let's just remove it.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/cadence/macb.c | 6 ------
 1 file changed, 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c
index 6116887d2880..ca97005e24b4 100644
--- a/drivers/net/ethernet/cadence/macb.c
+++ b/drivers/net/ethernet/cadence/macb.c
@@ -199,11 +199,6 @@ static int macb_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
 	return 0;
 }
 
-static int macb_mdio_reset(struct mii_bus *bus)
-{
-	return 0;
-}
-
 /**
  * macb_set_tx_clk() - Set a clock to a new frequency
  * @clk		Pointer to the clock to change
@@ -375,7 +370,6 @@ int macb_mii_init(struct macb *bp)
 	bp->mii_bus->name = "MACB_mii_bus";
 	bp->mii_bus->read = &macb_mdio_read;
 	bp->mii_bus->write = &macb_mdio_write;
-	bp->mii_bus->reset = &macb_mdio_reset;
 	snprintf(bp->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x",
 		bp->pdev->name, bp->pdev->id);
 	bp->mii_bus->priv = bp;
-- 
cgit v1.2.2


From 89e158f909253d8c7c2a65d1b2cbac2f07a28ed0 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Wed, 26 Mar 2014 18:07:16 -0700
Subject: dnet: remove empty MDIO bus reset function

dnet_mdio_reset() does nothing useful and is optional for the MDIO bus
code, so let's just remove it.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/dnet.c | 6 ------
 1 file changed, 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/dnet.c b/drivers/net/ethernet/dnet.c
index 8a79a32a5674..e9b0faba3078 100644
--- a/drivers/net/ethernet/dnet.c
+++ b/drivers/net/ethernet/dnet.c
@@ -170,11 +170,6 @@ static int dnet_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
 	return 0;
 }
 
-static int dnet_mdio_reset(struct mii_bus *bus)
-{
-	return 0;
-}
-
 static void dnet_handle_link_change(struct net_device *dev)
 {
 	struct dnet *bp = netdev_priv(dev);
@@ -322,7 +317,6 @@ static int dnet_mii_init(struct dnet *bp)
 	bp->mii_bus->name = "dnet_mii_bus";
 	bp->mii_bus->read = &dnet_mdio_read;
 	bp->mii_bus->write = &dnet_mdio_write;
-	bp->mii_bus->reset = &dnet_mdio_reset;
 
 	snprintf(bp->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x",
 		bp->pdev->name, bp->pdev->id);
-- 
cgit v1.2.2


From 6da4dc629b8e20332570cca9e29a1d83b83464e5 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Wed, 26 Mar 2014 18:07:17 -0700
Subject: net: ethoc: remove empty MDIO bus function

ethoc_mdio_reset() does nothing useful and is optional for the MDIO bus
code, so let's just remove it.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/ethoc.c | 6 ------
 1 file changed, 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/ethoc.c b/drivers/net/ethernet/ethoc.c
index 55e0fa03dc90..8b70ca7e342b 100644
--- a/drivers/net/ethernet/ethoc.c
+++ b/drivers/net/ethernet/ethoc.c
@@ -660,11 +660,6 @@ static int ethoc_mdio_write(struct mii_bus *bus, int phy, int reg, u16 val)
 	return -EBUSY;
 }
 
-static int ethoc_mdio_reset(struct mii_bus *bus)
-{
-	return 0;
-}
-
 static void ethoc_mdio_poll(struct net_device *dev)
 {
 }
@@ -1210,7 +1205,6 @@ static int ethoc_probe(struct platform_device *pdev)
 			priv->mdio->name, pdev->id);
 	priv->mdio->read = ethoc_mdio_read;
 	priv->mdio->write = ethoc_mdio_write;
-	priv->mdio->reset = ethoc_mdio_reset;
 	priv->mdio->priv = priv;
 
 	priv->mdio->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
-- 
cgit v1.2.2


From fe29bd8d1e806c4004c24e89a6608db14ef59a18 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Wed, 26 Mar 2014 18:07:18 -0700
Subject: fec: remove empty MDIO bus function

fec_enet_mdio_reset() does nothing useful and is optional for the MDIO
bus code, so let's just remove it.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/freescale/fec_main.c | 6 ------
 1 file changed, 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index f9f8a589cdef..e19315eaf2dd 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -1255,11 +1255,6 @@ static int fec_enet_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
 	return 0;
 }
 
-static int fec_enet_mdio_reset(struct mii_bus *bus)
-{
-	return 0;
-}
-
 static int fec_enet_mii_probe(struct net_device *ndev)
 {
 	struct fec_enet_private *fep = netdev_priv(ndev);
@@ -1384,7 +1379,6 @@ static int fec_enet_mii_init(struct platform_device *pdev)
 	fep->mii_bus->name = "fec_enet_mii_bus";
 	fep->mii_bus->read = fec_enet_mdio_read;
 	fep->mii_bus->write = fec_enet_mdio_write;
-	fep->mii_bus->reset = fec_enet_mdio_reset;
 	snprintf(fep->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x",
 		pdev->name, fep->dev_id + 1);
 	fep->mii_bus->priv = fep;
-- 
cgit v1.2.2


From 5cab2733b9de327c5f6c2707ecfb1d23d9003df7 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Wed, 26 Mar 2014 18:07:19 -0700
Subject: fs_enet: remove empty MDIO bus function

fs_enet_fec_mii_reset() does nothing useful and is optional for the MDIO
bus code, so let's just remove it.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/freescale/fs_enet/mii-fec.c | 7 -------
 1 file changed, 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/freescale/fs_enet/mii-fec.c b/drivers/net/ethernet/freescale/fs_enet/mii-fec.c
index 7e69c983d12a..ebf5d6429a8d 100644
--- a/drivers/net/ethernet/freescale/fs_enet/mii-fec.c
+++ b/drivers/net/ethernet/freescale/fs_enet/mii-fec.c
@@ -95,12 +95,6 @@ static int fs_enet_fec_mii_write(struct mii_bus *bus, int phy_id, int location,
 
 }
 
-static int fs_enet_fec_mii_reset(struct mii_bus *bus)
-{
-	/* nothing here - for now */
-	return 0;
-}
-
 static struct of_device_id fs_enet_mdio_fec_match[];
 static int fs_enet_mdio_probe(struct platform_device *ofdev)
 {
@@ -128,7 +122,6 @@ static int fs_enet_mdio_probe(struct platform_device *ofdev)
 	new_bus->name = "FEC MII Bus";
 	new_bus->read = &fs_enet_fec_mii_read;
 	new_bus->write = &fs_enet_fec_mii_write;
-	new_bus->reset = &fs_enet_fec_mii_reset;
 
 	ret = of_address_to_resource(ofdev->dev.of_node, 0, &res);
 	if (ret)
-- 
cgit v1.2.2


From ca7efe819cba14784e701638fe6bc69eb4a4438d Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Wed, 26 Mar 2014 18:07:20 -0700
Subject: net: mvmdio: remove empty MDIO bus reset function

orion_mdio_reset() does nothing useful and is optional for the MDIO bus
code, so let's just remove it.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/marvell/mvmdio.c | 6 ------
 1 file changed, 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/marvell/mvmdio.c b/drivers/net/ethernet/marvell/mvmdio.c
index fd409d76b811..b161a525fc5b 100644
--- a/drivers/net/ethernet/marvell/mvmdio.c
+++ b/drivers/net/ethernet/marvell/mvmdio.c
@@ -167,11 +167,6 @@ out:
 	return ret;
 }
 
-static int orion_mdio_reset(struct mii_bus *bus)
-{
-	return 0;
-}
-
 static irqreturn_t orion_mdio_err_irq(int irq, void *dev_id)
 {
 	struct orion_mdio_dev *dev = dev_id;
@@ -209,7 +204,6 @@ static int orion_mdio_probe(struct platform_device *pdev)
 	bus->name = "orion_mdio_bus";
 	bus->read = orion_mdio_read;
 	bus->write = orion_mdio_write;
-	bus->reset = orion_mdio_reset;
 	snprintf(bus->id, MII_BUS_ID_SIZE, "%s-mii",
 		 dev_name(&pdev->dev));
 	bus->parent = &pdev->dev;
-- 
cgit v1.2.2


From 33c0431ea67d1f6f3bf061a5cd2a5c52a07bb165 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Wed, 26 Mar 2014 18:07:21 -0700
Subject: net: emaclite: remove empty MDIO bus reset function

xemaclite_mdio_reset() does nothing useful and is optional for the MDIO
bus code, so let's just remove it.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/xilinx/xilinx_emaclite.c | 13 -------------
 1 file changed, 13 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
index 58756617644f..0d87c67a5ff7 100644
--- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c
+++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
@@ -794,18 +794,6 @@ static int xemaclite_mdio_write(struct mii_bus *bus, int phy_id, int reg,
 	return 0;
 }
 
-/**
- * xemaclite_mdio_reset - Reset the mdio bus.
- * @bus:	Pointer to the MII bus
- *
- * This function is required(?) as per Documentation/networking/phy.txt.
- * There is no reset in this device; this function always returns 0.
- */
-static int xemaclite_mdio_reset(struct mii_bus *bus)
-{
-	return 0;
-}
-
 /**
  * xemaclite_mdio_setup - Register mii_bus for the Emaclite device
  * @lp:		Pointer to the Emaclite device private data
@@ -861,7 +849,6 @@ static int xemaclite_mdio_setup(struct net_local *lp, struct device *dev)
 	bus->name = "Xilinx Emaclite MDIO";
 	bus->read = xemaclite_mdio_read;
 	bus->write = xemaclite_mdio_write;
-	bus->reset = xemaclite_mdio_reset;
 	bus->parent = dev;
 	bus->irq = lp->mdio_irqs; /* preallocated IRQ table */
 
-- 
cgit v1.2.2


From fe1ee45068f71d26e9516ba45d1b05b72708c585 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Wed, 26 Mar 2014 18:07:22 -0700
Subject: net: sun4i: remove empty MDIO bus reset function

sun4i_mdio_reset() does nothing useful and is optional for the MDIO bus
code, so let's just remove it.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/mdio-sun4i.c | 6 ------
 1 file changed, 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/phy/mdio-sun4i.c b/drivers/net/phy/mdio-sun4i.c
index 9367acc84fbb..15bc7f9ea224 100644
--- a/drivers/net/phy/mdio-sun4i.c
+++ b/drivers/net/phy/mdio-sun4i.c
@@ -90,11 +90,6 @@ static int sun4i_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
 	return 0;
 }
 
-static int sun4i_mdio_reset(struct mii_bus *bus)
-{
-	return 0;
-}
-
 static int sun4i_mdio_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
@@ -110,7 +105,6 @@ static int sun4i_mdio_probe(struct platform_device *pdev)
 	bus->name = "sun4i_mii_bus";
 	bus->read = &sun4i_mdio_read;
 	bus->write = &sun4i_mdio_write;
-	bus->reset = &sun4i_mdio_reset;
 	snprintf(bus->id, MII_BUS_ID_SIZE, "%s-mii", dev_name(&pdev->dev));
 	bus->parent = &pdev->dev;
 
-- 
cgit v1.2.2


From aa7e0ed4a15dc8d5f278fc71e32ca60c4206f090 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Wed, 26 Mar 2014 18:07:23 -0700
Subject: net: ftgmac100: remove empty MDIO bus reset function

ftgmac100_mdiobus_reset() does nothing useful and is optional for the
MDIO bus code, so let's just remove it.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/faraday/ftgmac100.c | 6 ------
 1 file changed, 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
index c11ecbc98149..68069eabc4f8 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c
@@ -940,11 +940,6 @@ static int ftgmac100_mdiobus_write(struct mii_bus *bus, int phy_addr,
 	return -EIO;
 }
 
-static int ftgmac100_mdiobus_reset(struct mii_bus *bus)
-{
-	return 0;
-}
-
 /******************************************************************************
  * struct ethtool_ops functions
  *****************************************************************************/
@@ -1262,7 +1257,6 @@ static int ftgmac100_probe(struct platform_device *pdev)
 	priv->mii_bus->priv = netdev;
 	priv->mii_bus->read = ftgmac100_mdiobus_read;
 	priv->mii_bus->write = ftgmac100_mdiobus_write;
-	priv->mii_bus->reset = ftgmac100_mdiobus_reset;
 	priv->mii_bus->irq = priv->phy_irq;
 
 	for (i = 0; i < PHY_MAX_ADDR; i++)
-- 
cgit v1.2.2


From 42cb7a280609f0b68855f232b95a5f373428fddc Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Wed, 26 Mar 2014 18:07:24 -0700
Subject: r6040: remove empty MDIO bus reset function

r6040_mdiobus_reset() does nothing useful and is optional for the MDIO
bus code, so let's just remove it.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/rdc/r6040.c | 6 ------
 1 file changed, 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/rdc/r6040.c b/drivers/net/ethernet/rdc/r6040.c
index 819b74cefd64..cd045ecb9816 100644
--- a/drivers/net/ethernet/rdc/r6040.c
+++ b/drivers/net/ethernet/rdc/r6040.c
@@ -270,11 +270,6 @@ static int r6040_mdiobus_write(struct mii_bus *bus, int phy_addr,
 	return r6040_phy_write(ioaddr, phy_addr, reg, value);
 }
 
-static int r6040_mdiobus_reset(struct mii_bus *bus)
-{
-	return 0;
-}
-
 static void r6040_free_txbufs(struct net_device *dev)
 {
 	struct r6040_private *lp = netdev_priv(dev);
@@ -1191,7 +1186,6 @@ static int r6040_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	lp->mii_bus->priv = dev;
 	lp->mii_bus->read = r6040_mdiobus_read;
 	lp->mii_bus->write = r6040_mdiobus_write;
-	lp->mii_bus->reset = r6040_mdiobus_reset;
 	lp->mii_bus->name = "r6040_eth_mii";
 	snprintf(lp->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x",
 		dev_name(&pdev->dev), card_idx);
-- 
cgit v1.2.2


From 3eecc94894b338819a53908e4971a5f434eccb79 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Wed, 26 Mar 2014 18:07:25 -0700
Subject: bfin_mac: remove empty MDIO bus reset function

bfin_mdiobus_reset() does nothing useful and is optional for the MDIO
bus code, so let's just remove it.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/adi/bfin_mac.c | 6 ------
 1 file changed, 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/adi/bfin_mac.c b/drivers/net/ethernet/adi/bfin_mac.c
index 95779b6b7394..7ae74d450e8f 100644
--- a/drivers/net/ethernet/adi/bfin_mac.c
+++ b/drivers/net/ethernet/adi/bfin_mac.c
@@ -307,11 +307,6 @@ static int bfin_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum,
 	return bfin_mdio_poll();
 }
 
-static int bfin_mdiobus_reset(struct mii_bus *bus)
-{
-	return 0;
-}
-
 static void bfin_mac_adjust_link(struct net_device *dev)
 {
 	struct bfin_mac_local *lp = netdev_priv(dev);
@@ -1824,7 +1819,6 @@ static int bfin_mii_bus_probe(struct platform_device *pdev)
 		goto out_err_alloc;
 	miibus->read = bfin_mdiobus_read;
 	miibus->write = bfin_mdiobus_write;
-	miibus->reset = bfin_mdiobus_reset;
 
 	miibus->parent = &pdev->dev;
 	miibus->name = "bfin_mii_bus";
-- 
cgit v1.2.2


From ce806783bd43f0cd0631d7b2946d503cb912721f Mon Sep 17 00:00:00 2001
From: Anjali Singhai Jain <anjali.singhai@intel.com>
Date: Thu, 6 Mar 2014 08:59:54 +0000
Subject: i40e: Delete ATR filter on RST

We currently delete ATR filter on FIN alone, delete on RST as well.

Change-ID: Ie7cae5d1046b9d1d4a0d6ef5bdbf41224c3dade6
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_txrx.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index 851f6537a96a..de25a32f927e 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -1624,8 +1624,11 @@ static void i40e_atr(struct i40e_ring *tx_ring, struct sk_buff *skb,
 
 	tx_ring->atr_count++;
 
-	/* sample on all syn/fin packets or once every atr sample rate */
-	if (!th->fin && !th->syn && (tx_ring->atr_count < tx_ring->atr_sample_rate))
+	/* sample on all syn/fin/rst packets or once every atr sample rate */
+	if (!th->fin &&
+	    !th->syn &&
+	    !th->rst &&
+	    (tx_ring->atr_count < tx_ring->atr_sample_rate))
 		return;
 
 	tx_ring->atr_count = 0;
@@ -1649,7 +1652,7 @@ static void i40e_atr(struct i40e_ring *tx_ring, struct sk_buff *skb,
 
 	dtype_cmd = I40E_TX_DESC_DTYPE_FILTER_PROG;
 
-	dtype_cmd |= th->fin ?
+	dtype_cmd |= (th->fin || th->rst) ?
 		     (I40E_FILTER_PROGRAM_DESC_PCMD_REMOVE <<
 		      I40E_TXD_FLTR_QW1_PCMD_SHIFT) :
 		     (I40E_FILTER_PROGRAM_DESC_PCMD_ADD_UPDATE <<
-- 
cgit v1.2.2


From 3526d8005f23da22846bdbdb4ed445ab0038dff0 Mon Sep 17 00:00:00 2001
From: Mitch Williams <mitch.a.williams@intel.com>
Date: Thu, 6 Mar 2014 08:59:56 +0000
Subject: i40evf: fix oops in watchdog handler

The Tx watchdog handler runs in interrupt context, so it would cause an
oops when sending an admin queue message to request a reset, because the
admin queue functions use spinlocks.

Instead, set a flag and let the reset task handle sending the request.

Change-ID: I65879470b72963d9c308edfb8f45ac4fbba2c14f
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40evf/i40evf.h      |  1 +
 drivers/net/ethernet/intel/i40evf/i40evf_main.c | 10 +++++++---
 2 files changed, 8 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40evf/i40evf.h b/drivers/net/ethernet/intel/i40evf/i40evf.h
index ccb43d343543..807807d62387 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf.h
+++ b/drivers/net/ethernet/intel/i40evf/i40evf.h
@@ -211,6 +211,7 @@ struct i40evf_adapter {
 #define I40EVF_FLAG_NEED_LINK_UPDATE             (u32)(1 << 7)
 #define I40EVF_FLAG_PF_COMMS_FAILED              (u32)(1 << 8)
 #define I40EVF_FLAG_RESET_PENDING                (u32)(1 << 9)
+#define I40EVF_FLAG_RESET_NEEDED                 (u32)(1 << 10)
 /* duplcates for common code */
 #define I40E_FLAG_FDIR_ATR_ENABLED		 0
 #define I40E_FLAG_DCB_ENABLED			 0
diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index d3eafa320ba9..51c84c19d2be 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -169,9 +169,7 @@ static void i40evf_tx_timeout(struct net_device *netdev)
 	adapter->tx_timeout_count++;
 	dev_info(&adapter->pdev->dev, "TX timeout detected.\n");
 	if (!(adapter->flags & I40EVF_FLAG_RESET_PENDING)) {
-		dev_info(&adapter->pdev->dev, "Requesting reset from PF\n");
-		i40evf_request_reset(adapter);
-		adapter->flags |= I40EVF_FLAG_RESET_PENDING;
+		adapter->flags |= I40EVF_FLAG_RESET_NEEDED;
 		schedule_work(&adapter->reset_task);
 	}
 }
@@ -1484,6 +1482,12 @@ static void i40evf_reset_task(struct work_struct *work)
 	while (test_and_set_bit(__I40EVF_IN_CRITICAL_TASK,
 				&adapter->crit_section))
 		udelay(500);
+
+	if (adapter->flags & I40EVF_FLAG_RESET_NEEDED) {
+		dev_info(&adapter->pdev->dev, "Requesting reset from PF\n");
+		i40evf_request_reset(adapter);
+	}
+
 	/* poll until we see the reset actually happen */
 	for (i = 0; i < I40EVF_RESET_WAIT_COUNT; i++) {
 		rstat_val = rd32(hw, I40E_VFGEN_RSTAT) &
-- 
cgit v1.2.2


From 90e04070966a0c393f8e203ac07cda06fcb311f0 Mon Sep 17 00:00:00 2001
From: Greg Rose <gregory.v.rose@intel.com>
Date: Thu, 6 Mar 2014 08:59:57 +0000
Subject: i40e: Make the alloc and free queue vector calls orthogonal

It's annoying to search for a matching alloc and free set of function calls
when they don't use the same framework for the name of the functions.  Fix
that up in the case of alloc and free of vsi queue vectors.

i40e_vsi_free_q*
i40e_vsi_alloc_q*

Change-ID: I510eb863a0fbe405312bebea55c2846c76285e6d
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 28df88ef3c8b..91fd1f1f8f45 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -6111,13 +6111,13 @@ static int i40e_init_msix(struct i40e_pf *pf)
 }
 
 /**
- * i40e_alloc_q_vector - Allocate memory for a single interrupt vector
+ * i40e_vsi_alloc_q_vector - Allocate memory for a single interrupt vector
  * @vsi: the VSI being configured
  * @v_idx: index of the vector in the vsi struct
  *
  * We allocate one q_vector.  If allocation fails we return -ENOMEM.
  **/
-static int i40e_alloc_q_vector(struct i40e_vsi *vsi, int v_idx)
+static int i40e_vsi_alloc_q_vector(struct i40e_vsi *vsi, int v_idx)
 {
 	struct i40e_q_vector *q_vector;
 
@@ -6143,13 +6143,13 @@ static int i40e_alloc_q_vector(struct i40e_vsi *vsi, int v_idx)
 }
 
 /**
- * i40e_alloc_q_vectors - Allocate memory for interrupt vectors
+ * i40e_vsi_alloc_q_vectors - Allocate memory for interrupt vectors
  * @vsi: the VSI being configured
  *
  * We allocate one q_vector per queue interrupt.  If allocation fails we
  * return -ENOMEM.
  **/
-static int i40e_alloc_q_vectors(struct i40e_vsi *vsi)
+static int i40e_vsi_alloc_q_vectors(struct i40e_vsi *vsi)
 {
 	struct i40e_pf *pf = vsi->back;
 	int v_idx, num_q_vectors;
@@ -6164,7 +6164,7 @@ static int i40e_alloc_q_vectors(struct i40e_vsi *vsi)
 		return -EINVAL;
 
 	for (v_idx = 0; v_idx < num_q_vectors; v_idx++) {
-		err = i40e_alloc_q_vector(vsi, v_idx);
+		err = i40e_vsi_alloc_q_vector(vsi, v_idx);
 		if (err)
 			goto err_out;
 	}
@@ -7020,7 +7020,7 @@ static int i40e_vsi_setup_vectors(struct i40e_vsi *vsi)
 		return -EEXIST;
 	}
 
-	ret = i40e_alloc_q_vectors(vsi);
+	ret = i40e_vsi_alloc_q_vectors(vsi);
 	if (ret) {
 		dev_info(&pf->pdev->dev,
 			 "failed to allocate %d q_vector for VSI %d, ret=%d\n",
-- 
cgit v1.2.2


From 4eb3f7685fd6ffbe28a0a4ff10cced2acda5f7ec Mon Sep 17 00:00:00 2001
From: Shannon Nelson <shannon.nelson@intel.com>
Date: Thu, 6 Mar 2014 08:59:58 +0000
Subject: i40e: eeprom integrity check on load and empr

The driver needs to verify the eeprom checksum and firmware crc status bits,
and shutdown the driver if they fail. This code stops the processing of traffic,
but doesn't kill the PF netdev so that the NVMUpdate process should still have a
chance at fixing the image. The eeprom is checked on driver load and after an
EMP reset, the latter of which should be generated after an NVMUpdate.

Change-ID: I34deef21d2e16bf5a43c603cf8af27e6a29dc9d2
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e.h      |  1 +
 drivers/net/ethernet/intel/i40e/i40e_main.c | 50 +++++++++++++++++++++++++----
 2 files changed, 45 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
index 33cd8b67535d..beb7b4393a6c 100644
--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -136,6 +136,7 @@ enum i40e_state_t {
 	__I40E_EMP_RESET_REQUESTED,
 	__I40E_FILTER_OVERFLOW_PROMISC,
 	__I40E_SUSPENDED,
+	__I40E_BAD_EEPROM,
 };
 
 enum i40e_interrupt_policy {
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 91fd1f1f8f45..a1ec793b93db 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -26,6 +26,7 @@
 
 /* Local includes */
 #include "i40e.h"
+#include "i40e_diag.h"
 #ifdef CONFIG_I40E_VXLAN
 #include <net/vxlan.h>
 #endif
@@ -2877,12 +2878,14 @@ static irqreturn_t i40e_intr(int irq, void *data)
 		val = rd32(hw, I40E_GLGEN_RSTAT);
 		val = (val & I40E_GLGEN_RSTAT_RESET_TYPE_MASK)
 		       >> I40E_GLGEN_RSTAT_RESET_TYPE_SHIFT;
-		if (val == I40E_RESET_CORER)
+		if (val == I40E_RESET_CORER) {
 			pf->corer_count++;
-		else if (val == I40E_RESET_GLOBR)
+		} else if (val == I40E_RESET_GLOBR) {
 			pf->globr_count++;
-		else if (val == I40E_RESET_EMPR)
+		} else if (val == I40E_RESET_EMPR) {
 			pf->empr_count++;
+			set_bit(__I40E_EMP_RESET_REQUESTED, &pf->state);
+		}
 	}
 
 	if (icr0 & I40E_PFINT_ICR0_HMC_ERR_MASK) {
@@ -4257,8 +4260,9 @@ static int i40e_open(struct net_device *netdev)
 	struct i40e_pf *pf = vsi->back;
 	int err;
 
-	/* disallow open during test */
-	if (test_bit(__I40E_TESTING, &pf->state))
+	/* disallow open during test or if eeprom is broken */
+	if (test_bit(__I40E_TESTING, &pf->state) ||
+	    test_bit(__I40E_BAD_EEPROM, &pf->state))
 		return -EBUSY;
 
 	netif_carrier_off(netdev);
@@ -5077,6 +5081,31 @@ static void i40e_clean_adminq_subtask(struct i40e_pf *pf)
 	kfree(event.msg_buf);
 }
 
+/**
+ * i40e_verify_eeprom - make sure eeprom is good to use
+ * @pf: board private structure
+ **/
+static void i40e_verify_eeprom(struct i40e_pf *pf)
+{
+	int err;
+
+	err = i40e_diag_eeprom_test(&pf->hw);
+	if (err) {
+		/* retry in case of garbage read */
+		err = i40e_diag_eeprom_test(&pf->hw);
+		if (err) {
+			dev_info(&pf->pdev->dev, "eeprom check failed (%d), Tx/Rx traffic disabled\n",
+				 err);
+			set_bit(__I40E_BAD_EEPROM, &pf->state);
+		}
+	}
+
+	if (!err && test_bit(__I40E_BAD_EEPROM, &pf->state)) {
+		dev_info(&pf->pdev->dev, "eeprom check passed, Tx/Rx traffic enabled\n");
+		clear_bit(__I40E_BAD_EEPROM, &pf->state);
+	}
+}
+
 /**
  * i40e_reconstitute_veb - rebuild the VEB and anything connected to it
  * @veb: pointer to the VEB instance
@@ -5386,6 +5415,12 @@ static void i40e_reset_and_rebuild(struct i40e_pf *pf, bool reinit)
 		goto end_core_reset;
 	}
 
+	/* re-verify the eeprom if we just had an EMP reset */
+	if (test_bit(__I40E_EMP_RESET_REQUESTED, &pf->state)) {
+		clear_bit(__I40E_EMP_RESET_REQUESTED, &pf->state);
+		i40e_verify_eeprom(pf);
+	}
+
 	ret = i40e_get_capabilities(pf);
 	if (ret) {
 		dev_info(&pf->pdev->dev, "i40e_get_capabilities failed, %d\n",
@@ -8157,6 +8192,8 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto err_pf_reset;
 	}
 
+	i40e_verify_eeprom(pf);
+
 	i40e_clear_pxe_mode(hw);
 	err = i40e_get_capabilities(pf);
 	if (err)
@@ -8258,7 +8295,8 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	/* prep for VF support */
 	if ((pf->flags & I40E_FLAG_SRIOV_ENABLED) &&
-	    (pf->flags & I40E_FLAG_MSIX_ENABLED)) {
+	    (pf->flags & I40E_FLAG_MSIX_ENABLED) &&
+	    !test_bit(__I40E_BAD_EEPROM, &pf->state)) {
 		u32 val;
 
 		/* disable link interrupts for VFs */
-- 
cgit v1.2.2


From 1eaa3840b786ac9294e9ed8e8dc3fdca29dc9091 Mon Sep 17 00:00:00 2001
From: Anjali Singhai Jain <anjali.singhai@intel.com>
Date: Thu, 6 Mar 2014 08:59:59 +0000
Subject: i40e: Cleanup in FDIR SB ethtool code

Function add_del_fdir was used and implemented only for add. So change the name
and drop a parameter.

Change-ID: Icf2c6c3bbd4fd00cf8d9613a3f6d8c08e0f8e288
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 32 +++++++++++---------------
 1 file changed, 13 insertions(+), 19 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index 28da4125c8c9..0461a72b1311 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -62,8 +62,8 @@ static const struct i40e_stats i40e_gstrings_net_stats[] = {
 	I40E_NETDEV_STAT(rx_crc_errors),
 };
 
-static int i40e_add_del_fdir_ethtool(struct i40e_vsi *vsi,
-				     struct ethtool_rxnfc *cmd, bool add);
+static int i40e_add_fdir_ethtool(struct i40e_vsi *vsi,
+				 struct ethtool_rxnfc *cmd);
 
 /* These PF_STATs might look like duplicates of some NETDEV_STATs,
  * but they are separate.  This device supports Virtualization, and
@@ -1470,16 +1470,15 @@ static int i40e_del_fdir_entry(struct i40e_vsi *vsi,
 }
 
 /**
- * i40e_add_del_fdir_ethtool - Add/Remove Flow Director filters
+ * i40e_add_fdir_ethtool - Add/Remove Flow Director filters
  * @vsi: pointer to the targeted VSI
  * @cmd: command to get or set RX flow classification rules
- * @add: true adds a filter, false removes it
  *
- * Add/Remove Flow Director filters for a specific flow spec based on their
- * protocol.  Returns 0 if the filters were successfully added or removed.
+ * Add Flow Director filters for a specific flow spec based on their
+ * protocol.  Returns 0 if the filters were successfully added.
  **/
-static int i40e_add_del_fdir_ethtool(struct i40e_vsi *vsi,
-				     struct ethtool_rxnfc *cmd, bool add)
+static int i40e_add_fdir_ethtool(struct i40e_vsi *vsi,
+				 struct ethtool_rxnfc *cmd)
 {
 	struct ethtool_rx_flow_spec *fsp;
 	struct i40e_fdir_filter *input;
@@ -1494,7 +1493,7 @@ static int i40e_add_del_fdir_ethtool(struct i40e_vsi *vsi,
 	if (!(pf->flags & I40E_FLAG_FD_SB_ENABLED))
 		return -EOPNOTSUPP;
 
-	if (add && (pf->auto_disable_flags & I40E_FLAG_FD_SB_ENABLED))
+	if (pf->auto_disable_flags & I40E_FLAG_FD_SB_ENABLED)
 		return -ENOSPC;
 
 	fsp = (struct ethtool_rx_flow_spec *)&cmd->fs;
@@ -1504,7 +1503,7 @@ static int i40e_add_del_fdir_ethtool(struct i40e_vsi *vsi,
 		return -EINVAL;
 	}
 
-	if ((fsp->ring_cookie >= vsi->num_queue_pairs) && add)
+	if (fsp->ring_cookie >= vsi->num_queue_pairs)
 		return -EINVAL;
 
 	input = kzalloc(sizeof(*input), GFP_KERNEL);
@@ -1528,16 +1527,11 @@ static int i40e_add_del_fdir_ethtool(struct i40e_vsi *vsi,
 	input->src_ip[0] = fsp->h_u.tcp_ip4_spec.ip4src;
 	input->dst_ip[0] = fsp->h_u.tcp_ip4_spec.ip4dst;
 
-	ret = i40e_add_del_fdir(vsi, input, add);
-	if (ret) {
+	ret = i40e_add_del_fdir(vsi, input, true);
+	if (ret)
 		kfree(input);
-		return ret;
-	}
-
-	if (!ret && add)
-		i40e_update_ethtool_fdir_entry(vsi, input, fsp->location, NULL);
 	else
-		kfree(input);
+		i40e_update_ethtool_fdir_entry(vsi, input, fsp->location, NULL);
 
 	return ret;
 }
@@ -1561,7 +1555,7 @@ static int i40e_set_rxnfc(struct net_device *netdev, struct ethtool_rxnfc *cmd)
 		ret = i40e_set_rss_hash_opt(pf, cmd);
 		break;
 	case ETHTOOL_SRXCLSRLINS:
-		ret = i40e_add_del_fdir_ethtool(vsi, cmd, true);
+		ret = i40e_add_fdir_ethtool(vsi, cmd);
 		break;
 	case ETHTOOL_SRXCLSRLDEL:
 		ret = i40e_del_fdir_entry(vsi, cmd);
-- 
cgit v1.2.2


From 35a91fdd52cc3890764ed429d7aed816aa54f65f Mon Sep 17 00:00:00 2001
From: Anjali Singhai Jain <anjali.singhai@intel.com>
Date: Thu, 6 Mar 2014 09:00:00 +0000
Subject: i40e: Add functionality for FD SB to drop packets

With this change we can drop a flow if we wanted to.

Change-ID: I222b1ae960e61a31965bafe3159a95099e70c7d2
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index 0461a72b1311..aa123f43fb8e 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -1513,11 +1513,16 @@ static int i40e_add_fdir_ethtool(struct i40e_vsi *vsi,
 
 	input->fd_id = fsp->location;
 
+	if (fsp->ring_cookie == RX_CLS_FLOW_DISC)
+		input->dest_ctl = I40E_FILTER_PROGRAM_DESC_DEST_DROP_PACKET;
+	else
+		input->dest_ctl =
+			     I40E_FILTER_PROGRAM_DESC_DEST_DIRECT_PACKET_QINDEX;
+
 	input->q_index = fsp->ring_cookie;
 	input->flex_off = 0;
 	input->pctype = 0;
 	input->dest_vsi = vsi->id;
-	input->dest_ctl = I40E_FILTER_PROGRAM_DESC_DEST_DIRECT_PACKET_QINDEX;
 	input->fd_status = I40E_FILTER_PROGRAM_DESC_FD_STATUS_FD_ID;
 	input->cnt_index = 0;
 	input->flow_type = fsp->flow_type;
-- 
cgit v1.2.2


From c5503603430bb255f67f518466fd79e924aabe31 Mon Sep 17 00:00:00 2001
From: Jesse Brandeburg <jesse.brandeburg@intel.com>
Date: Thu, 6 Mar 2014 09:00:01 +0000
Subject: i40evf: remove double space after return

There were two spaces between return and the value, we only need one.

Change-ID: Iaa42c33f50d8d149cdf1a4c9c1902295bfd991c4
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Kevin Scott <kevin.c.scott@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40evf/i40e_prototype.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40evf/i40e_prototype.h b/drivers/net/ethernet/intel/i40evf/i40e_prototype.h
index 862fcdf52675..97ab8c2b76f8 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_prototype.h
+++ b/drivers/net/ethernet/intel/i40evf/i40e_prototype.h
@@ -67,7 +67,7 @@ extern struct i40e_rx_ptype_decoded i40evf_ptype_lookup[];
 
 static inline struct i40e_rx_ptype_decoded decode_rx_desc_ptype(u8 ptype)
 {
-	return  i40evf_ptype_lookup[ptype];
+	return i40evf_ptype_lookup[ptype];
 }
 
 /* prototype for functions used for SW locks */
-- 
cgit v1.2.2


From ca04657b9d529f11ca6f85f83016d77bcb41b6b4 Mon Sep 17 00:00:00 2001
From: Shannon Nelson <shannon.nelson@intel.com>
Date: Thu, 6 Mar 2014 09:00:02 +0000
Subject: i40e: check for netdev before debugfs use

Make sure the VSI has a netdev before trying to use it
in the debugfs netdev_ops commands.

Change-ID: I2d744fc0c32b3226534ce2cde171d9675c5440a6
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_debugfs.c | 35 ++++++++++++++++----------
 1 file changed, 22 insertions(+), 13 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
index afd43d7973fa..3c37386fd138 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
@@ -2087,9 +2087,13 @@ static ssize_t i40e_dbg_netdev_ops_write(struct file *filp,
 		if (!vsi) {
 			dev_info(&pf->pdev->dev,
 				 "tx_timeout: VSI %d not found\n", vsi_seid);
-			goto netdev_ops_write_done;
-		}
-		if (rtnl_trylock()) {
+		} else if (!vsi->netdev) {
+			dev_info(&pf->pdev->dev, "tx_timeout: no netdev for VSI %d\n",
+				 vsi_seid);
+		} else if (test_bit(__I40E_DOWN, &vsi->state)) {
+			dev_info(&pf->pdev->dev, "tx_timeout: VSI %d not UP\n",
+				 vsi_seid);
+		} else if (rtnl_trylock()) {
 			vsi->netdev->netdev_ops->ndo_tx_timeout(vsi->netdev);
 			rtnl_unlock();
 			dev_info(&pf->pdev->dev, "tx_timeout called\n");
@@ -2108,9 +2112,10 @@ static ssize_t i40e_dbg_netdev_ops_write(struct file *filp,
 		if (!vsi) {
 			dev_info(&pf->pdev->dev,
 				 "change_mtu: VSI %d not found\n", vsi_seid);
-			goto netdev_ops_write_done;
-		}
-		if (rtnl_trylock()) {
+		} else if (!vsi->netdev) {
+			dev_info(&pf->pdev->dev, "change_mtu: no netdev for VSI %d\n",
+				 vsi_seid);
+		} else if (rtnl_trylock()) {
 			vsi->netdev->netdev_ops->ndo_change_mtu(vsi->netdev,
 								mtu);
 			rtnl_unlock();
@@ -2129,9 +2134,10 @@ static ssize_t i40e_dbg_netdev_ops_write(struct file *filp,
 		if (!vsi) {
 			dev_info(&pf->pdev->dev,
 				 "set_rx_mode: VSI %d not found\n", vsi_seid);
-			goto netdev_ops_write_done;
-		}
-		if (rtnl_trylock()) {
+		} else if (!vsi->netdev) {
+			dev_info(&pf->pdev->dev, "set_rx_mode: no netdev for VSI %d\n",
+				 vsi_seid);
+		} else if (rtnl_trylock()) {
 			vsi->netdev->netdev_ops->ndo_set_rx_mode(vsi->netdev);
 			rtnl_unlock();
 			dev_info(&pf->pdev->dev, "set_rx_mode called\n");
@@ -2149,11 +2155,14 @@ static ssize_t i40e_dbg_netdev_ops_write(struct file *filp,
 		if (!vsi) {
 			dev_info(&pf->pdev->dev, "napi: VSI %d not found\n",
 				 vsi_seid);
-			goto netdev_ops_write_done;
+		} else if (!vsi->netdev) {
+			dev_info(&pf->pdev->dev, "napi: no netdev for VSI %d\n",
+				 vsi_seid);
+		} else {
+			for (i = 0; i < vsi->num_q_vectors; i++)
+				napi_schedule(&vsi->q_vectors[i]->napi);
+			dev_info(&pf->pdev->dev, "napi called\n");
 		}
-		for (i = 0; i < vsi->num_q_vectors; i++)
-			napi_schedule(&vsi->q_vectors[i]->napi);
-		dev_info(&pf->pdev->dev, "napi called\n");
 	} else {
 		dev_info(&pf->pdev->dev, "unknown command '%s'\n",
 			 i40e_dbg_netdev_ops_buf);
-- 
cgit v1.2.2


From c2e1b5966a7deb08e44276fa1429175565a7f02d Mon Sep 17 00:00:00 2001
From: Anjali Singhai Jain <anjali.singhai@intel.com>
Date: Thu, 6 Mar 2014 09:00:03 +0000
Subject: i40e/i40evf: Add an FD message level

To use for Flow Director specific messages.

Change-ID: I69e39a410aa2661f8fd1ed6af0126fa4c335cb77
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Acked-by: Shannon Nelson <shannon.nelson@intel.com>
Acked-by: Kevin Scott <kevin.c.scott@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_type.h   | 1 +
 drivers/net/ethernet/intel/i40evf/i40e_type.h | 1 +
 2 files changed, 2 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_type.h b/drivers/net/ethernet/intel/i40e/i40e_type.h
index d2f0b95fd0d7..71a968fe557f 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_type.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_type.h
@@ -91,6 +91,7 @@ enum i40e_debug_mask {
 	I40E_DEBUG_FLOW			= 0x00000200,
 	I40E_DEBUG_DCB			= 0x00000400,
 	I40E_DEBUG_DIAG			= 0x00000800,
+	I40E_DEBUG_FD			= 0x00001000,
 
 	I40E_DEBUG_AQ_MESSAGE		= 0x01000000,
 	I40E_DEBUG_AQ_DESCRIPTOR	= 0x02000000,
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_type.h b/drivers/net/ethernet/intel/i40evf/i40e_type.h
index efe73ad6fdb9..4673b3381edd 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_type.h
+++ b/drivers/net/ethernet/intel/i40evf/i40e_type.h
@@ -88,6 +88,7 @@ enum i40e_debug_mask {
 	I40E_DEBUG_FLOW			= 0x00000200,
 	I40E_DEBUG_DCB			= 0x00000400,
 	I40E_DEBUG_DIAG			= 0x00000800,
+	I40E_DEBUG_FD			= 0x00001000,
 
 	I40E_DEBUG_AQ_MESSAGE		= 0x01000000,
 	I40E_DEBUG_AQ_DESCRIPTOR	= 0x02000000,
-- 
cgit v1.2.2


From 13c2884f155bc524c5e94482216030de480fea60 Mon Sep 17 00:00:00 2001
From: Anjali Singhai Jain <anjali.singhai@intel.com>
Date: Thu, 6 Mar 2014 09:00:04 +0000
Subject: i40e: Use DEBUG_FD message level for an FD message

We don't need to print this info unless at FD message level.

Change-ID: I329efdd8e754a0ea0669ec04d12e03db02e6b76e
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_txrx.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index de25a32f927e..a329aacb392f 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -482,8 +482,9 @@ static void i40e_fd_handle_status(struct i40e_ring *rx_ring,
 		}
 	} else if (error ==
 			  (0x1 << I40E_RX_PROG_STATUS_DESC_NO_FD_ENTRY_SHIFT)) {
-		netdev_info(rx_ring->vsi->netdev, "ntuple filter loc = %d, could not be removed\n",
-			    rx_desc->wb.qword0.hi_dword.fd_id);
+		if (I40E_DEBUG_FD & pf->hw.debug_mask)
+			dev_info(&pdev->dev, "ntuple filter loc = %d, could not be removed\n",
+				 rx_desc->wb.qword0.hi_dword.fd_id);
 	}
 }
 
-- 
cgit v1.2.2


From 59c871c5f0540c974db85eaa77f518de26940c1f Mon Sep 17 00:00:00 2001
From: Jakub Kicinski <kubakici@wp.pl>
Date: Sat, 15 Mar 2014 14:55:00 +0000
Subject: e1000e: add timeout for TX HW time stamping work

Hardware may fail to report time stamp e.g.:
 - when hardware time stamping is not enabled
 - when time stamp is requested shortly after ifup

Timeout time stamp reading work to prevent it from
scheduling itself indefinitely. Report timeout events
via system log and device stats.

Signed-off-by: Jakub Kicinski <kubakici@wp.pl>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/e1000e/e1000.h   | 2 ++
 drivers/net/ethernet/intel/e1000e/ethtool.c | 1 +
 drivers/net/ethernet/intel/e1000e/netdev.c  | 7 +++++++
 3 files changed, 10 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h
index 5325e3e2154e..1471c5464a89 100644
--- a/drivers/net/ethernet/intel/e1000e/e1000.h
+++ b/drivers/net/ethernet/intel/e1000e/e1000.h
@@ -262,6 +262,7 @@ struct e1000_adapter {
 	u32 tx_head_addr;
 	u32 tx_fifo_size;
 	u32 tx_dma_failed;
+	u32 tx_hwtstamp_timeouts;
 
 	/* Rx */
 	bool (*clean_rx) (struct e1000_ring *ring, int *work_done,
@@ -334,6 +335,7 @@ struct e1000_adapter {
 	struct hwtstamp_config hwtstamp_config;
 	struct delayed_work systim_overflow_work;
 	struct sk_buff *tx_hwtstamp_skb;
+	unsigned long tx_hwtstamp_start;
 	struct work_struct tx_hwtstamp_work;
 	spinlock_t systim_lock;	/* protects SYSTIML/H regsters */
 	struct cyclecounter cc;
diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c
index 3c2898d0c2aa..cad250bc1b99 100644
--- a/drivers/net/ethernet/intel/e1000e/ethtool.c
+++ b/drivers/net/ethernet/intel/e1000e/ethtool.c
@@ -104,6 +104,7 @@ static const struct e1000_stats e1000_gstrings_stats[] = {
 	E1000_STAT("rx_hwtstamp_cleared", rx_hwtstamp_cleared),
 	E1000_STAT("uncorr_ecc_errors", uncorr_errors),
 	E1000_STAT("corr_ecc_errors", corr_errors),
+	E1000_STAT("tx_hwtstamp_timeouts", tx_hwtstamp_timeouts),
 };
 
 #define E1000_GLOBAL_STATS_LEN	ARRAY_SIZE(e1000_gstrings_stats)
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 6bd1832e3f3e..b8d252fcad18 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -1163,6 +1163,12 @@ static void e1000e_tx_hwtstamp_work(struct work_struct *work)
 		skb_tstamp_tx(adapter->tx_hwtstamp_skb, &shhwtstamps);
 		dev_kfree_skb_any(adapter->tx_hwtstamp_skb);
 		adapter->tx_hwtstamp_skb = NULL;
+	} else if (time_after(jiffies, adapter->tx_hwtstamp_start
+			      + adapter->tx_timeout_factor * HZ)) {
+		dev_kfree_skb_any(adapter->tx_hwtstamp_skb);
+		adapter->tx_hwtstamp_skb = NULL;
+		adapter->tx_hwtstamp_timeouts++;
+		e_warn("clearing Tx timestamp hang");
 	} else {
 		/* reschedule to check later */
 		schedule_work(&adapter->tx_hwtstamp_work);
@@ -5567,6 +5573,7 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
 			skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
 			tx_flags |= E1000_TX_FLAGS_HWTSTAMP;
 			adapter->tx_hwtstamp_skb = skb_get(skb);
+			adapter->tx_hwtstamp_start = jiffies;
 			schedule_work(&adapter->tx_hwtstamp_work);
 		} else {
 			skb_tx_timestamp(skb);
-- 
cgit v1.2.2


From 201b54b8d245ae248fabd2e62b75272da47c475b Mon Sep 17 00:00:00 2001
From: Jakub Kicinski <kubakici@wp.pl>
Date: Sat, 15 Mar 2014 14:55:05 +0000
Subject: e1000e: remove redundant if clause from PTP work

tx_hwtstamp_skb is always set before work is scheduled,
work is cancelled before tx_hwtstamp_skb is set to NULL.
PTP work cannot ever see tx_hwtstamp_skb set to NULL.

Signed-off-by: Jakub Kicinski <kubakici@wp.pl>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/e1000e/netdev.c | 3 ---
 1 file changed, 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index b8d252fcad18..f1cce5928e20 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -1148,9 +1148,6 @@ static void e1000e_tx_hwtstamp_work(struct work_struct *work)
 						     tx_hwtstamp_work);
 	struct e1000_hw *hw = &adapter->hw;
 
-	if (!adapter->tx_hwtstamp_skb)
-		return;
-
 	if (er32(TSYNCTXCTL) & E1000_TSYNCTXCTL_VALID) {
 		struct skb_shared_hwtstamps shhwtstamps;
 		u64 txstmp;
-- 
cgit v1.2.2


From afc835d1bda13923e3792d838dae1fa34c506b09 Mon Sep 17 00:00:00 2001
From: Jakub Kicinski <kubakici@wp.pl>
Date: Sat, 15 Mar 2014 14:55:26 +0000
Subject: igb: never generate both software and hardware timestamps

skb_tx_timestamp() does not report software time stamp
if SKBTX_IN_PROGRESS is set. According to timestamping.txt
software time stamps are a fallback and should not be
generated if hardware time stamp is provided.

Move call to skb_tx_timestamp() after setting
SKBTX_IN_PROGRESS.

Signed-off-by: Jakub Kicinski <kubakici@wp.pl>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/igb/igb_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index cd20409858d1..1fdffa20fe97 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -4980,8 +4980,6 @@ netdev_tx_t igb_xmit_frame_ring(struct sk_buff *skb,
 	first->bytecount = skb->len;
 	first->gso_segs = 1;
 
-	skb_tx_timestamp(skb);
-
 	if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)) {
 		struct igb_adapter *adapter = netdev_priv(tx_ring->netdev);
 
@@ -4996,6 +4994,8 @@ netdev_tx_t igb_xmit_frame_ring(struct sk_buff *skb,
 		}
 	}
 
+	skb_tx_timestamp(skb);
+
 	if (vlan_tx_tag_present(skb)) {
 		tx_flags |= IGB_TX_FLAGS_VLAN;
 		tx_flags |= (vlan_tx_tag_get(skb) << IGB_TX_FLAGS_VLAN_SHIFT);
-- 
cgit v1.2.2


From ed4420a3b412b09cc60d6e3d662428b7e6c36e90 Mon Sep 17 00:00:00 2001
From: Jakub Kicinski <kubakici@wp.pl>
Date: Sat, 15 Mar 2014 14:55:32 +0000
Subject: igb: fix race conditions on queuing skb for HW time stamp

igb has a single set of TX time stamping resources per NIC.
Use a simple bit lock to avoid race conditions and leaking skbs
when multiple TX rings try to claim time stamping.

Signed-off-by: Jakub Kicinski <kubakici@wp.pl>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/igb/igb.h      | 3 ++-
 drivers/net/ethernet/intel/igb/igb_main.c | 3 ++-
 drivers/net/ethernet/intel/igb/igb_ptp.c  | 3 +++
 3 files changed, 7 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/igb/igb.h b/drivers/net/ethernet/intel/igb/igb.h
index 411b213c63be..7fbe1e925143 100644
--- a/drivers/net/ethernet/intel/igb/igb.h
+++ b/drivers/net/ethernet/intel/igb/igb.h
@@ -492,7 +492,8 @@ struct igb_adapter {
 enum e1000_state_t {
 	__IGB_TESTING,
 	__IGB_RESETTING,
-	__IGB_DOWN
+	__IGB_DOWN,
+	__IGB_PTP_TX_IN_PROGRESS,
 };
 
 enum igb_boards {
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 1fdffa20fe97..55fc5596e2d0 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -4983,7 +4983,8 @@ netdev_tx_t igb_xmit_frame_ring(struct sk_buff *skb,
 	if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)) {
 		struct igb_adapter *adapter = netdev_priv(tx_ring->netdev);
 
-		if (!(adapter->ptp_tx_skb)) {
+		if (!test_and_set_bit_lock(__IGB_PTP_TX_IN_PROGRESS,
+					   &adapter->state)) {
 			skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
 			tx_flags |= IGB_TX_FLAGS_TSTAMP;
 
diff --git a/drivers/net/ethernet/intel/igb/igb_ptp.c b/drivers/net/ethernet/intel/igb/igb_ptp.c
index da55fbb090b2..2cca8fd5e574 100644
--- a/drivers/net/ethernet/intel/igb/igb_ptp.c
+++ b/drivers/net/ethernet/intel/igb/igb_ptp.c
@@ -387,6 +387,7 @@ static void igb_ptp_tx_work(struct work_struct *work)
 				   IGB_PTP_TX_TIMEOUT)) {
 		dev_kfree_skb_any(adapter->ptp_tx_skb);
 		adapter->ptp_tx_skb = NULL;
+		clear_bit_unlock(__IGB_PTP_TX_IN_PROGRESS, &adapter->state);
 		adapter->tx_hwtstamp_timeouts++;
 		dev_warn(&adapter->pdev->dev, "clearing Tx timestamp hang");
 		return;
@@ -480,6 +481,7 @@ static void igb_ptp_tx_hwtstamp(struct igb_adapter *adapter)
 	skb_tstamp_tx(adapter->ptp_tx_skb, &shhwtstamps);
 	dev_kfree_skb_any(adapter->ptp_tx_skb);
 	adapter->ptp_tx_skb = NULL;
+	clear_bit_unlock(__IGB_PTP_TX_IN_PROGRESS, &adapter->state);
 }
 
 /**
@@ -857,6 +859,7 @@ void igb_ptp_stop(struct igb_adapter *adapter)
 	if (adapter->ptp_tx_skb) {
 		dev_kfree_skb_any(adapter->ptp_tx_skb);
 		adapter->ptp_tx_skb = NULL;
+		clear_bit_unlock(__IGB_PTP_TX_IN_PROGRESS, &adapter->state);
 	}
 
 	if (adapter->ptp_clock) {
-- 
cgit v1.2.2


From a401801c6ed141f8cee735775a501ea9e3e6aaed Mon Sep 17 00:00:00 2001
From: Sathya Perla <sathya.perla@emulex.com>
Date: Thu, 27 Mar 2014 10:46:18 +0530
Subject: be2net: add FW cmds needed for VxLAN offloads

This patch adds support for the FW cmds needed for VxLAN offloads
on Skyhawk-R:
1) The VxLAN UDP port needs to be configured via the port-desc of
   SET_PROFILE_CONFIG_v1 cmd.
   This patch re-factors the be_set_profile_config() code (used so far
   only for setting VF QoS) to be used to set any type of descriptor.
2) The MANAGE_IFACE_FILTERS cmds is needed to convert a normal interface
   into a tunnel interface. This allows for RSS to work even on the inner
   TCP/UDP headers of VxLAN traffic.

Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/emulex/benet/be_cmds.c | 135 +++++++++++++++++++++-------
 drivers/net/ethernet/emulex/benet/be_cmds.h |  69 ++++++++++----
 drivers/net/ethernet/emulex/benet/be_main.c |   8 +-
 3 files changed, 154 insertions(+), 58 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c
index cf5afe72f12f..d1ec15af0d24 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.c
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.c
@@ -3503,14 +3503,11 @@ err:
 	return status;
 }
 
-/* Currently only Lancer uses this command and it supports version 0 only
- * Uses sync mcc
- */
-int be_cmd_set_profile_config(struct be_adapter *adapter, u32 bps,
-			      u8 domain)
+int be_cmd_set_profile_config(struct be_adapter *adapter, void *desc,
+			      int size, u8 version, u8 domain)
 {
-	struct be_mcc_wrb *wrb;
 	struct be_cmd_req_set_profile_config *req;
+	struct be_mcc_wrb *wrb;
 	int status;
 
 	spin_lock_bh(&adapter->mcc_lock);
@@ -3522,44 +3519,116 @@ int be_cmd_set_profile_config(struct be_adapter *adapter, u32 bps,
 	}
 
 	req = embedded_payload(wrb);
-
 	be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
 			       OPCODE_COMMON_SET_PROFILE_CONFIG, sizeof(*req),
 			       wrb, NULL);
+	req->hdr.version = version;
 	req->hdr.domain = domain;
 	req->desc_count = cpu_to_le32(1);
-	req->nic_desc.hdr.desc_type = NIC_RESOURCE_DESC_TYPE_V0;
-	req->nic_desc.hdr.desc_len = RESOURCE_DESC_SIZE_V0;
-	req->nic_desc.flags = (1 << QUN) | (1 << IMM) | (1 << NOSV);
-	req->nic_desc.pf_num = adapter->pf_number;
-	req->nic_desc.vf_num = domain;
-
-	/* Mark fields invalid */
-	req->nic_desc.unicast_mac_count = 0xFFFF;
-	req->nic_desc.mcc_count = 0xFFFF;
-	req->nic_desc.vlan_count = 0xFFFF;
-	req->nic_desc.mcast_mac_count = 0xFFFF;
-	req->nic_desc.txq_count = 0xFFFF;
-	req->nic_desc.rq_count = 0xFFFF;
-	req->nic_desc.rssq_count = 0xFFFF;
-	req->nic_desc.lro_count = 0xFFFF;
-	req->nic_desc.cq_count = 0xFFFF;
-	req->nic_desc.toe_conn_count = 0xFFFF;
-	req->nic_desc.eq_count = 0xFFFF;
-	req->nic_desc.link_param = 0xFF;
-	req->nic_desc.bw_min = 0xFFFFFFFF;
-	req->nic_desc.acpi_params = 0xFF;
-	req->nic_desc.wol_param = 0x0F;
-
-	/* Change BW */
-	req->nic_desc.bw_min = cpu_to_le32(bps);
-	req->nic_desc.bw_max = cpu_to_le32(bps);
+	memcpy(req->desc, desc, size);
+
 	status = be_mcc_notify_wait(adapter);
 err:
 	spin_unlock_bh(&adapter->mcc_lock);
 	return status;
 }
 
+/* Mark all fields invalid */
+void be_reset_nic_desc(struct be_nic_res_desc *nic)
+{
+	memset(nic, 0, sizeof(*nic));
+	nic->unicast_mac_count = 0xFFFF;
+	nic->mcc_count = 0xFFFF;
+	nic->vlan_count = 0xFFFF;
+	nic->mcast_mac_count = 0xFFFF;
+	nic->txq_count = 0xFFFF;
+	nic->rq_count = 0xFFFF;
+	nic->rssq_count = 0xFFFF;
+	nic->lro_count = 0xFFFF;
+	nic->cq_count = 0xFFFF;
+	nic->toe_conn_count = 0xFFFF;
+	nic->eq_count = 0xFFFF;
+	nic->link_param = 0xFF;
+	nic->acpi_params = 0xFF;
+	nic->wol_param = 0x0F;
+	nic->bw_min = 0xFFFFFFFF;
+	nic->bw_max = 0xFFFFFFFF;
+}
+
+int be_cmd_config_qos(struct be_adapter *adapter, u32 bps, u8 domain)
+{
+	if (lancer_chip(adapter)) {
+		struct be_nic_res_desc nic_desc;
+
+		be_reset_nic_desc(&nic_desc);
+		nic_desc.hdr.desc_type = NIC_RESOURCE_DESC_TYPE_V0;
+		nic_desc.hdr.desc_len = RESOURCE_DESC_SIZE_V0;
+		nic_desc.flags = (1 << QUN_SHIFT) | (1 << IMM_SHIFT) |
+					(1 << NOSV_SHIFT);
+		nic_desc.pf_num = adapter->pf_number;
+		nic_desc.vf_num = domain;
+		nic_desc.bw_max = cpu_to_le32(bps);
+
+		return be_cmd_set_profile_config(adapter, &nic_desc,
+						 RESOURCE_DESC_SIZE_V0,
+						 0, domain);
+	} else {
+		return be_cmd_set_qos(adapter, bps, domain);
+	}
+}
+
+int be_cmd_manage_iface(struct be_adapter *adapter, u32 iface, u8 op)
+{
+	struct be_mcc_wrb *wrb;
+	struct be_cmd_req_manage_iface_filters *req;
+	int status;
+
+	if (iface == 0xFFFFFFFF)
+		return -1;
+
+	spin_lock_bh(&adapter->mcc_lock);
+
+	wrb = wrb_from_mccq(adapter);
+	if (!wrb) {
+		status = -EBUSY;
+		goto err;
+	}
+	req = embedded_payload(wrb);
+
+	be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+			       OPCODE_COMMON_MANAGE_IFACE_FILTERS, sizeof(*req),
+			       wrb, NULL);
+	req->op = op;
+	req->target_iface_id = cpu_to_le32(iface);
+
+	status = be_mcc_notify_wait(adapter);
+err:
+	spin_unlock_bh(&adapter->mcc_lock);
+	return status;
+}
+
+int be_cmd_set_vxlan_port(struct be_adapter *adapter, __be16 port)
+{
+	struct be_port_res_desc port_desc;
+
+	memset(&port_desc, 0, sizeof(port_desc));
+	port_desc.hdr.desc_type = PORT_RESOURCE_DESC_TYPE_V1;
+	port_desc.hdr.desc_len = RESOURCE_DESC_SIZE_V1;
+	port_desc.flags = (1 << IMM_SHIFT) | (1 << NOSV_SHIFT);
+	port_desc.link_num = adapter->hba_port_num;
+	if (port) {
+		port_desc.nv_flags = NV_TYPE_VXLAN | (1 << SOCVID_SHIFT) |
+					(1 << RCVID_SHIFT);
+		port_desc.nv_port = swab16(port);
+	} else {
+		port_desc.nv_flags = NV_TYPE_DISABLED;
+		port_desc.nv_port = 0;
+	}
+
+	return be_cmd_set_profile_config(adapter, &port_desc,
+					 RESOURCE_DESC_SIZE_V1, 1, 0);
+}
+
 int be_cmd_get_if_id(struct be_adapter *adapter, struct be_vf_cfg *vf_cfg,
 		     int vf_num)
 {
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.h b/drivers/net/ethernet/emulex/benet/be_cmds.h
index fda3e8851e17..b60e4d53c1c9 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.h
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.h
@@ -222,6 +222,7 @@ struct be_mcc_mailbox {
 #define OPCODE_COMMON_GET_FN_PRIVILEGES			170
 #define OPCODE_COMMON_READ_OBJECT			171
 #define OPCODE_COMMON_WRITE_OBJECT			172
+#define OPCODE_COMMON_MANAGE_IFACE_FILTERS		193
 #define OPCODE_COMMON_GET_IFACE_LIST			194
 #define OPCODE_COMMON_ENABLE_DISABLE_VF			196
 
@@ -1824,18 +1825,33 @@ struct be_cmd_req_set_ext_fat_caps {
 #define PORT_RESOURCE_DESC_TYPE_V1		0x55
 #define MAX_RESOURCE_DESC			264
 
-/* QOS unit number */
-#define QUN					4
-/* Immediate */
-#define IMM					6
-/* No save */
-#define NOSV					7
+#define IMM_SHIFT				6	/* Immediate */
+#define NOSV_SHIFT				7	/* No save */
 
 struct be_res_desc_hdr {
 	u8 desc_type;
 	u8 desc_len;
 } __packed;
 
+struct be_port_res_desc {
+	struct be_res_desc_hdr hdr;
+	u8 rsvd0;
+	u8 flags;
+	u8 link_num;
+	u8 mc_type;
+	u16 rsvd1;
+
+#define NV_TYPE_MASK				0x3	/* bits 0-1 */
+#define NV_TYPE_DISABLED			1
+#define NV_TYPE_VXLAN				3
+#define SOCVID_SHIFT				2	/* Strip outer vlan */
+#define RCVID_SHIFT				4	/* Report vlan */
+	u8 nv_flags;
+	u8 rsvd2;
+	__le16 nv_port;					/* vxlan/gre port */
+	u32 rsvd3[19];
+} __packed;
+
 struct be_pcie_res_desc {
 	struct be_res_desc_hdr hdr;
 	u8 rsvd0;
@@ -1856,6 +1872,8 @@ struct be_pcie_res_desc {
 struct be_nic_res_desc {
 	struct be_res_desc_hdr hdr;
 	u8 rsvd1;
+
+#define QUN_SHIFT				4 /* QoS is in absolute units */
 	u8 flags;
 	u8 vf_num;
 	u8 rsvd2;
@@ -1896,16 +1914,6 @@ enum mc_type {
 	vNIC2 = 0x07
 };
 
-struct be_port_res_desc {
-	struct be_res_desc_hdr hdr;
-	u8 rsvd0;
-	u8 flags;
-	u8 rsvd1;
-	u8 mc_type;
-	u16 rsvd2;
-	u32 rsvd3[20];
-} __packed;
-
 /* Is BE in a multi-channel mode */
 static inline bool be_is_mc(struct be_adapter *adapter)
 {
@@ -1940,7 +1948,7 @@ struct be_cmd_req_set_profile_config {
 	struct be_cmd_req_hdr hdr;
 	u32 rsvd;
 	u32 desc_count;
-	struct be_nic_res_desc nic_desc;
+	u8 desc[RESOURCE_DESC_SIZE_V1];
 };
 
 struct be_cmd_resp_set_profile_config {
@@ -1999,6 +2007,26 @@ struct be_cmd_req_set_ll_link {
 	u32 link_config; /* Bit 0: UP_DOWN, Bit 9: PLINK */
 };
 
+/************** Manage IFACE Filters *******************/
+#define OP_CONVERT_NORMAL_TO_TUNNEL		0
+#define OP_CONVERT_TUNNEL_TO_NORMAL		1
+
+struct be_cmd_req_manage_iface_filters {
+	struct be_cmd_req_hdr hdr;
+	u8  op;
+	u8  rsvd0;
+	u8  flags;
+	u8  rsvd1;
+	u32 tunnel_iface_id;
+	u32 target_iface_id;
+	u8  mac[6];
+	u16 vlan_tag;
+	u32 tenant_id;
+	u32 filter_id;
+	u32 cap_flags;
+	u32 cap_control_flags;
+} __packed;
+
 int be_pci_fnum_get(struct be_adapter *adapter);
 int be_fw_wait_ready(struct be_adapter *adapter);
 int be_cmd_mac_addr_query(struct be_adapter *adapter, u8 *mac_addr,
@@ -2073,7 +2101,7 @@ int be_cmd_get_seeprom_data(struct be_adapter *adapter,
 int be_cmd_set_loopback(struct be_adapter *adapter, u8 port_num,
 			u8 loopback_type, u8 enable);
 int be_cmd_get_phy_info(struct be_adapter *adapter);
-int be_cmd_set_qos(struct be_adapter *adapter, u32 bps, u32 domain);
+int be_cmd_config_qos(struct be_adapter *adapter, u32 bps, u8 domain);
 void be_detect_error(struct be_adapter *adapter);
 int be_cmd_get_die_temperature(struct be_adapter *adapter);
 int be_cmd_get_cntl_attributes(struct be_adapter *adapter);
@@ -2114,7 +2142,8 @@ int be_cmd_get_func_config(struct be_adapter *adapter,
 			   struct be_resources *res);
 int be_cmd_get_profile_config(struct be_adapter *adapter,
 			      struct be_resources *res, u8 domain);
-int be_cmd_set_profile_config(struct be_adapter *adapter, u32 bps, u8 domain);
+int be_cmd_set_profile_config(struct be_adapter *adapter, void *desc,
+			      int size, u8 version, u8 domain);
 int be_cmd_get_active_profile(struct be_adapter *adapter, u16 *profile);
 int be_cmd_get_if_id(struct be_adapter *adapter, struct be_vf_cfg *vf_cfg,
 		     int vf_num);
@@ -2122,3 +2151,5 @@ int be_cmd_enable_vf(struct be_adapter *adapter, u8 domain);
 int be_cmd_intr_set(struct be_adapter *adapter, bool intr_enable);
 int be_cmd_set_logical_link_config(struct be_adapter *adapter,
 					  int link_state, u8 domain);
+int be_cmd_set_vxlan_port(struct be_adapter *adapter, __be16 port);
+int be_cmd_manage_iface(struct be_adapter *adapter, u32 iface, u8 op);
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index a61f967f9ca1..8790e5497ba0 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -1346,11 +1346,7 @@ static int be_set_vf_tx_rate(struct net_device *netdev,
 		return -EINVAL;
 	}
 
-	if (lancer_chip(adapter))
-		status = be_cmd_set_profile_config(adapter, rate / 10, vf + 1);
-	else
-		status = be_cmd_set_qos(adapter, rate / 10, vf + 1);
-
+	status = be_cmd_config_qos(adapter, rate / 10, vf + 1);
 	if (status)
 		dev_err(&adapter->pdev->dev,
 				"tx rate %d on VF %d failed\n", rate, vf);
@@ -3124,7 +3120,7 @@ static int be_vf_setup(struct be_adapter *adapter)
 		 * Allow full available bandwidth
 		 */
 		if (BE3_chip(adapter) && !old_vfs)
-			be_cmd_set_qos(adapter, 1000, vf+1);
+			be_cmd_config_qos(adapter, 1000, vf + 1);
 
 		status = be_cmd_link_status_query(adapter, &lnk_speed,
 						  NULL, vf + 1);
-- 
cgit v1.2.2


From c9c47142f6bf4684c13b571b312b67f3830f1d86 Mon Sep 17 00:00:00 2001
From: Sathya Perla <sathya.perla@emulex.com>
Date: Thu, 27 Mar 2014 10:46:19 +0530
Subject: be2net: csum, tso and rss steering offload support for VxLAN

This patch mainly implements the add/del_vxlan_port() methods by invoking
the needed FW cmds for supporting VxLAN offloads for Skyhawk-R.

Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/emulex/benet/be.h      |   7 +-
 drivers/net/ethernet/emulex/benet/be_hw.h   |   3 +-
 drivers/net/ethernet/emulex/benet/be_main.c | 124 ++++++++++++++++++++++++++--
 3 files changed, 125 insertions(+), 9 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h
index a587c8aa27ed..8ccaa2520dc3 100644
--- a/drivers/net/ethernet/emulex/benet/be.h
+++ b/drivers/net/ethernet/emulex/benet/be.h
@@ -296,6 +296,7 @@ struct be_rx_compl_info {
 	u8 qnq;
 	u8 pkt_type;
 	u8 ip_frag;
+	u8 tunneled;
 };
 
 struct be_rx_obj {
@@ -371,10 +372,11 @@ enum vf_state {
 #define BE_FLAGS_WORKER_SCHEDULED		(1 << 3)
 #define BE_FLAGS_VLAN_PROMISC			(1 << 4)
 #define BE_FLAGS_NAPI_ENABLED			(1 << 9)
-#define BE_UC_PMAC_COUNT		30
-#define BE_VF_UC_PMAC_COUNT		2
 #define BE_FLAGS_QNQ_ASYNC_EVT_RCVD		(1 << 11)
+#define BE_FLAGS_VXLAN_OFFLOADS			(1 << 12)
 
+#define BE_UC_PMAC_COUNT			30
+#define BE_VF_UC_PMAC_COUNT			2
 /* Ethtool set_dump flags */
 #define LANCER_INITIATE_FW_DUMP			0x1
 
@@ -494,6 +496,7 @@ struct be_adapter {
 	u32 sli_family;
 	u8 hba_port_num;
 	u16 pvid;
+	__be16 vxlan_port;
 	struct phy_info phy;
 	u8 wol_cap;
 	bool wol_en;
diff --git a/drivers/net/ethernet/emulex/benet/be_hw.h b/drivers/net/ethernet/emulex/benet/be_hw.h
index 28ac8dd0beaa..3bd198550edb 100644
--- a/drivers/net/ethernet/emulex/benet/be_hw.h
+++ b/drivers/net/ethernet/emulex/benet/be_hw.h
@@ -407,7 +407,8 @@ struct amap_eth_rx_compl_v1 {
 	u8 vntagp;		/* dword 2 */
 	u8 header_len[8];	/* dword 2 */
 	u8 header_split[2];	/* dword 2 */
-	u8 rsvd1[13];		/* dword 2 */
+	u8 rsvd1[12];		/* dword 2 */
+	u8 tunneled;
 	u8 valid;		/* dword 2 */
 	u8 rsshash[32];		/* dword 3 */
 } __packed;
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 8790e5497ba0..c89dc85ad8d6 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -23,6 +23,7 @@
 #include <linux/aer.h>
 #include <linux/if_bridge.h>
 #include <net/busy_poll.h>
+#include <net/vxlan.h>
 
 MODULE_VERSION(DRV_VER);
 MODULE_DEVICE_TABLE(pci, be_dev_ids);
@@ -718,10 +719,23 @@ static inline u16 be_get_tx_vlan_tag(struct be_adapter *adapter,
 	return vlan_tag;
 }
 
+/* Used only for IP tunnel packets */
+static u16 skb_inner_ip_proto(struct sk_buff *skb)
+{
+	return (inner_ip_hdr(skb)->version == 4) ?
+		inner_ip_hdr(skb)->protocol : inner_ipv6_hdr(skb)->nexthdr;
+}
+
+static u16 skb_ip_proto(struct sk_buff *skb)
+{
+	return (ip_hdr(skb)->version == 4) ?
+		ip_hdr(skb)->protocol : ipv6_hdr(skb)->nexthdr;
+}
+
 static void wrb_fill_hdr(struct be_adapter *adapter, struct be_eth_hdr_wrb *hdr,
 		struct sk_buff *skb, u32 wrb_cnt, u32 len, bool skip_hw_vlan)
 {
-	u16 vlan_tag;
+	u16 vlan_tag, proto;
 
 	memset(hdr, 0, sizeof(*hdr));
 
@@ -734,9 +748,15 @@ static void wrb_fill_hdr(struct be_adapter *adapter, struct be_eth_hdr_wrb *hdr,
 		if (skb_is_gso_v6(skb) && !lancer_chip(adapter))
 			AMAP_SET_BITS(struct amap_eth_hdr_wrb, lso6, hdr, 1);
 	} else if (skb->ip_summed == CHECKSUM_PARTIAL) {
-		if (is_tcp_pkt(skb))
+		if (skb->encapsulation) {
+			AMAP_SET_BITS(struct amap_eth_hdr_wrb, ipcs, hdr, 1);
+			proto = skb_inner_ip_proto(skb);
+		} else {
+			proto = skb_ip_proto(skb);
+		}
+		if (proto == IPPROTO_TCP)
 			AMAP_SET_BITS(struct amap_eth_hdr_wrb, tcpcs, hdr, 1);
-		else if (is_udp_pkt(skb))
+		else if (proto == IPPROTO_UDP)
 			AMAP_SET_BITS(struct amap_eth_hdr_wrb, udpcs, hdr, 1);
 	}
 
@@ -1467,9 +1487,10 @@ static void be_rx_stats_update(struct be_rx_obj *rxo,
 static inline bool csum_passed(struct be_rx_compl_info *rxcp)
 {
 	/* L4 checksum is not reliable for non TCP/UDP packets.
-	 * Also ignore ipcksm for ipv6 pkts */
+	 * Also ignore ipcksm for ipv6 pkts
+	 */
 	return (rxcp->tcpf || rxcp->udpf) && rxcp->l4_csum &&
-				(rxcp->ip_csum || rxcp->ipv6);
+		(rxcp->ip_csum || rxcp->ipv6) && !rxcp->err;
 }
 
 static struct be_rx_page_info *get_rx_page_info(struct be_rx_obj *rxo)
@@ -1612,6 +1633,8 @@ static void be_rx_compl_process(struct be_rx_obj *rxo, struct napi_struct *napi,
 	skb_record_rx_queue(skb, rxo - &adapter->rx_obj[0]);
 	if (netdev->features & NETIF_F_RXHASH)
 		skb_set_hash(skb, rxcp->rss_hash, PKT_HASH_TYPE_L3);
+
+	skb->encapsulation = rxcp->tunneled;
 	skb_mark_napi_id(skb, napi);
 
 	if (rxcp->vlanf)
@@ -1668,6 +1691,8 @@ static void be_rx_compl_process_gro(struct be_rx_obj *rxo,
 	skb_record_rx_queue(skb, rxo - &adapter->rx_obj[0]);
 	if (adapter->netdev->features & NETIF_F_RXHASH)
 		skb_set_hash(skb, rxcp->rss_hash, PKT_HASH_TYPE_L3);
+
+	skb->encapsulation = rxcp->tunneled;
 	skb_mark_napi_id(skb, napi);
 
 	if (rxcp->vlanf)
@@ -1704,6 +1729,8 @@ static void be_parse_rx_compl_v1(struct be_eth_rx_compl *compl,
 					       compl);
 	}
 	rxcp->port = AMAP_GET_BITS(struct amap_eth_rx_compl_v1, port, compl);
+	rxcp->tunneled =
+		AMAP_GET_BITS(struct amap_eth_rx_compl_v1, tunneled, compl);
 }
 
 static void be_parse_rx_compl_v0(struct be_eth_rx_compl *compl,
@@ -2834,6 +2861,9 @@ static int be_open(struct net_device *netdev)
 
 	netif_tx_start_all_queues(netdev);
 	be_roce_dev_open(adapter);
+
+	if (skyhawk_chip(adapter))
+		vxlan_get_rx_port(netdev);
 	return 0;
 err:
 	be_close(adapter->netdev);
@@ -2989,6 +3019,19 @@ static void be_mac_clear(struct be_adapter *adapter)
 	}
 }
 
+static void be_disable_vxlan_offloads(struct be_adapter *adapter)
+{
+	if (adapter->flags & BE_FLAGS_VXLAN_OFFLOADS)
+		be_cmd_manage_iface(adapter, adapter->if_handle,
+				    OP_CONVERT_TUNNEL_TO_NORMAL);
+
+	if (adapter->vxlan_port)
+		be_cmd_set_vxlan_port(adapter, 0);
+
+	adapter->flags &= ~BE_FLAGS_VXLAN_OFFLOADS;
+	adapter->vxlan_port = 0;
+}
+
 static int be_clear(struct be_adapter *adapter)
 {
 	be_cancel_worker(adapter);
@@ -2996,6 +3039,8 @@ static int be_clear(struct be_adapter *adapter)
 	if (sriov_enabled(adapter))
 		be_vf_clear(adapter);
 
+	be_disable_vxlan_offloads(adapter);
+
 	/* delete the primary mac along with the uc-mac list */
 	be_mac_clear(adapter);
 
@@ -4120,6 +4165,65 @@ static int be_ndo_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq,
 				       BRIDGE_MODE_VEPA : BRIDGE_MODE_VEB);
 }
 
+static void be_add_vxlan_port(struct net_device *netdev, sa_family_t sa_family,
+			      __be16 port)
+{
+	struct be_adapter *adapter = netdev_priv(netdev);
+	struct device *dev = &adapter->pdev->dev;
+	int status;
+
+	if (lancer_chip(adapter) || BEx_chip(adapter))
+		return;
+
+	if (adapter->flags & BE_FLAGS_VXLAN_OFFLOADS) {
+		dev_warn(dev, "Cannot add UDP port %d for VxLAN offloads\n",
+			 be16_to_cpu(port));
+		dev_info(dev,
+			 "Only one UDP port supported for VxLAN offloads\n");
+		return;
+	}
+
+	status = be_cmd_manage_iface(adapter, adapter->if_handle,
+				     OP_CONVERT_NORMAL_TO_TUNNEL);
+	if (status) {
+		dev_warn(dev, "Failed to convert normal interface to tunnel\n");
+		goto err;
+	}
+
+	status = be_cmd_set_vxlan_port(adapter, port);
+	if (status) {
+		dev_warn(dev, "Failed to add VxLAN port\n");
+		goto err;
+	}
+	adapter->flags |= BE_FLAGS_VXLAN_OFFLOADS;
+	adapter->vxlan_port = port;
+
+	dev_info(dev, "Enabled VxLAN offloads for UDP port %d\n",
+		 be16_to_cpu(port));
+	return;
+err:
+	be_disable_vxlan_offloads(adapter);
+	return;
+}
+
+static void be_del_vxlan_port(struct net_device *netdev, sa_family_t sa_family,
+			      __be16 port)
+{
+	struct be_adapter *adapter = netdev_priv(netdev);
+
+	if (lancer_chip(adapter) || BEx_chip(adapter))
+		return;
+
+	if (adapter->vxlan_port != port)
+		return;
+
+	be_disable_vxlan_offloads(adapter);
+
+	dev_info(&adapter->pdev->dev,
+		 "Disabled VxLAN offloads for UDP port %d\n",
+		 be16_to_cpu(port));
+}
+
 static const struct net_device_ops be_netdev_ops = {
 	.ndo_open		= be_open,
 	.ndo_stop		= be_close,
@@ -4142,14 +4246,22 @@ static const struct net_device_ops be_netdev_ops = {
 	.ndo_bridge_setlink	= be_ndo_bridge_setlink,
 	.ndo_bridge_getlink	= be_ndo_bridge_getlink,
 #ifdef CONFIG_NET_RX_BUSY_POLL
-	.ndo_busy_poll		= be_busy_poll
+	.ndo_busy_poll		= be_busy_poll,
 #endif
+	.ndo_add_vxlan_port	= be_add_vxlan_port,
+	.ndo_del_vxlan_port	= be_del_vxlan_port,
 };
 
 static void be_netdev_init(struct net_device *netdev)
 {
 	struct be_adapter *adapter = netdev_priv(netdev);
 
+	if (skyhawk_chip(adapter)) {
+		netdev->hw_enc_features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+					   NETIF_F_TSO | NETIF_F_TSO6 |
+					   NETIF_F_GSO_UDP_TUNNEL;
+		netdev->hw_features |= NETIF_F_GSO_UDP_TUNNEL;
+	}
 	netdev->hw_features |= NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6 |
 		NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | NETIF_F_RXCSUM |
 		NETIF_F_HW_VLAN_CTAG_TX;
-- 
cgit v1.2.2


From 40b92cad5efb9a03cff2f01dc96532e1a6bffa14 Mon Sep 17 00:00:00 2001
From: Byungho An <bh74.an@samsung.com>
Date: Fri, 28 Mar 2014 10:57:36 -0700
Subject: net: sxgbe: fix sparse warnings about static declaration

This fixes followings:

sparse warnings: (new ones prefixed by >>)

>> drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c:197:5:
sparse: symbol 'sxgbe_platform_freeze' was not declared. Should it be static?
>> drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c:204:5:
sparse: symbol 'sxgbe_platform_restore' was not declared. Should it be static?
>> drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c:228:24:
sparse: symbol 'sxgbe_platform_driver' was not declared. Should it be static?

>> drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c:1795:6:
sparse: symbol 'sxgbe_get_ops' was not declared. Should it be static?

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Byungho An <bh74.an@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c     | 2 +-
 drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c | 6 +++---
 2 files changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
index 1869d4c6e454..ee1fd3c4568f 100644
--- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
@@ -2013,7 +2013,7 @@ static const struct net_device_ops sxgbe_netdev_ops = {
 };
 
 /* Get the hardware ops */
-void sxgbe_get_ops(struct sxgbe_ops * const ops_ptr)
+static void sxgbe_get_ops(struct sxgbe_ops * const ops_ptr)
 {
 	ops_ptr->mac		= sxgbe_get_core_ops();
 	ops_ptr->desc		= sxgbe_get_desc_ops();
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c
index 94c2cd73d4a9..b147d469a799 100644
--- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c
@@ -200,14 +200,14 @@ static int sxgbe_platform_resume(struct device *dev)
 	return sxgbe_resume(ndev);
 }
 
-int sxgbe_platform_freeze(struct device *dev)
+static int sxgbe_platform_freeze(struct device *dev)
 {
 	struct net_device *ndev = dev_get_drvdata(dev);
 
 	return sxgbe_freeze(ndev);
 }
 
-int sxgbe_platform_restore(struct device *dev)
+static int sxgbe_platform_restore(struct device *dev)
 {
 	struct net_device *ndev = dev_get_drvdata(dev);
 
@@ -231,7 +231,7 @@ static const struct of_device_id sxgbe_dt_ids[] = {
 };
 MODULE_DEVICE_TABLE(of, sxgbe_dt_ids);
 
-struct platform_driver sxgbe_platform_driver = {
+static struct platform_driver sxgbe_platform_driver = {
 	.probe	= sxgbe_platform_probe,
 	.remove	= sxgbe_platform_remove,
 	.driver	= {
-- 
cgit v1.2.2


From 2405e8f64c14a2cc9967f1f9bbeb1ba48b6cc2a1 Mon Sep 17 00:00:00 2001
From: Byungho An <bh74.an@samsung.com>
Date: Fri, 28 Mar 2014 10:57:44 -0700
Subject: net: sxgbe: fix potential null dereference

This fixes following:

drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c:1828 sxgbe_hw_init()
error: potential null dereference 'priv->hw'.  (kmalloc returns null)

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Byungho An <bh74.an@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
index ee1fd3c4568f..a72688e8dc6c 100644
--- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
@@ -2039,11 +2039,13 @@ static void sxgbe_get_ops(struct sxgbe_ops * const ops_ptr)
  *  Description: this function checks the HW capability
  *  (if supported) and sets the driver's features.
  */
-static void sxgbe_hw_init(struct sxgbe_priv_data * const priv)
+static int sxgbe_hw_init(struct sxgbe_priv_data * const priv)
 {
 	u32 ctrl_ids;
 
 	priv->hw = kmalloc(sizeof(*priv->hw), GFP_KERNEL);
+	if(!priv->hw)
+		return -ENOMEM;
 
 	/* get the hardware ops */
 	sxgbe_get_ops(priv->hw);
@@ -2064,6 +2066,8 @@ static void sxgbe_hw_init(struct sxgbe_priv_data * const priv)
 
 	if (priv->hw_cap.rx_csum_offload)
 		pr_info("RX Checksum offload supported\n");
+
+	return 0;
 }
 
 /**
@@ -2102,7 +2106,9 @@ struct sxgbe_priv_data *sxgbe_drv_probe(struct device *device,
 	sxgbe_verify_args();
 
 	/* Init MAC and get the capabilities */
-	sxgbe_hw_init(priv);
+	ret = sxgbe_hw_init(priv);
+	if (ret)
+		goto error_free_netdev;
 
 	/* allocate memory resources for Descriptor rings */
 	ret = txring_mem_alloc(priv);
-- 
cgit v1.2.2


From 801d233b7302eeab94750427a623c10c044cb0ca Mon Sep 17 00:00:00 2001
From: Dinh Nguyen <dinguyen@altera.com>
Date: Wed, 26 Mar 2014 22:45:10 -0500
Subject: net: stmmac: Add SOCFPGA glue driver

Like the STi and sunxi series SOCs, Altera's SOCFPGA also needs a glue layer
on top of the Synopsys gmac IP.

This patch adds the platform driver for the glue layer which configures the IP
before the generic STMMAC driver takes over.

Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/stmicro/stmmac/Kconfig        |  10 ++
 drivers/net/ethernet/stmicro/stmmac/Makefile       |   1 +
 .../net/ethernet/stmicro/stmmac/dwmac-socfpga.c    | 130 +++++++++++++++++++++
 drivers/net/ethernet/stmicro/stmmac/stmmac.h       |   3 +
 .../net/ethernet/stmicro/stmmac/stmmac_platform.c  |   3 +
 5 files changed, 147 insertions(+)
 create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index f2d7c702c77f..2d09c116cbc8 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -26,6 +26,16 @@ config STMMAC_PLATFORM
 
 	  If unsure, say N.
 
+config DWMAC_SOCFPGA
+	bool "SOCFPGA dwmac support"
+	depends on STMMAC_PLATFORM && MFD_SYSCON && (ARCH_SOCFPGA || COMPILE_TEST)
+	help
+	  Support for ethernet controller on Altera SOCFPGA
+
+	  This selects the Altera SOCFPGA SoC glue layer support
+	  for the stmmac device driver. This driver is used for
+	  arria5 and cyclone5 FPGA SoCs.
+
 config DWMAC_SUNXI
 	bool "Allwinner GMAC support"
 	depends on STMMAC_PLATFORM && ARCH_SUNXI
diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile
index dcef28775dad..18695ebef7e4 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Makefile
+++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
@@ -3,6 +3,7 @@ stmmac-$(CONFIG_STMMAC_PLATFORM) += stmmac_platform.o
 stmmac-$(CONFIG_STMMAC_PCI) += stmmac_pci.o
 stmmac-$(CONFIG_DWMAC_SUNXI) += dwmac-sunxi.o
 stmmac-$(CONFIG_DWMAC_STI) += dwmac-sti.o
+stmmac-$(CONFIG_DWMAC_SOCFPGA) += dwmac-socfpga.o
 stmmac-objs:= stmmac_main.o stmmac_ethtool.o stmmac_mdio.o ring_mode.o	\
 	      chain_mode.o dwmac_lib.o dwmac1000_core.o  dwmac1000_dma.o \
 	      dwmac100_core.o dwmac100_dma.o enh_desc.o  norm_desc.o \
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
new file mode 100644
index 000000000000..fd8a217556a1
--- /dev/null
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
@@ -0,0 +1,130 @@
+/* Copyright Altera Corporation (C) 2014. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2,
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Adopted from dwmac-sti.c
+ */
+
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/of_net.h>
+#include <linux/phy.h>
+#include <linux/regmap.h>
+#include <linux/stmmac.h>
+
+#define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII 0x0
+#define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII 0x1
+#define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RMII 0x2
+#define SYSMGR_EMACGRP_CTRL_PHYSEL_WIDTH 2
+#define SYSMGR_EMACGRP_CTRL_PHYSEL_MASK 0x00000003
+
+struct socfpga_dwmac {
+	int	interface;
+	u32	reg_offset;
+	u32	reg_shift;
+	struct	device *dev;
+	struct regmap *sys_mgr_base_addr;
+};
+
+static int socfpga_dwmac_parse_data(struct socfpga_dwmac *dwmac, struct device *dev)
+{
+	struct device_node *np = dev->of_node;
+	struct regmap *sys_mgr_base_addr;
+	u32 reg_offset, reg_shift;
+	int ret;
+
+	dwmac->interface = of_get_phy_mode(np);
+
+	sys_mgr_base_addr = syscon_regmap_lookup_by_phandle(np, "altr,sysmgr-syscon");
+	if (IS_ERR(sys_mgr_base_addr)) {
+		dev_info(dev, "No sysmgr-syscon node found\n");
+		return PTR_ERR(sys_mgr_base_addr);
+	}
+
+	ret = of_property_read_u32_index(np, "altr,sysmgr-syscon", 1, &reg_offset);
+	if (ret) {
+		dev_info(dev, "Could not read reg_offset from sysmgr-syscon!\n");
+		return -EINVAL;
+	}
+
+	ret = of_property_read_u32_index(np, "altr,sysmgr-syscon", 2, &reg_shift);
+	if (ret) {
+		dev_info(dev, "Could not read reg_shift from sysmgr-syscon!\n");
+		return -EINVAL;
+	}
+
+	dwmac->reg_offset = reg_offset;
+	dwmac->reg_shift = reg_shift;
+	dwmac->sys_mgr_base_addr = sys_mgr_base_addr;
+	dwmac->dev = dev;
+
+	return 0;
+}
+
+static int socfpga_dwmac_setup(struct socfpga_dwmac *dwmac)
+{
+	struct regmap *sys_mgr_base_addr = dwmac->sys_mgr_base_addr;
+	int phymode = dwmac->interface;
+	u32 reg_offset = dwmac->reg_offset;
+	u32 reg_shift = dwmac->reg_shift;
+	u32 ctrl, val;
+
+	switch (phymode) {
+	case PHY_INTERFACE_MODE_RGMII:
+		val = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII;
+		break;
+	case PHY_INTERFACE_MODE_MII:
+	case PHY_INTERFACE_MODE_GMII:
+		val = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII;
+		break;
+	default:
+		dev_err(dwmac->dev, "bad phy mode %d\n", phymode);
+		return -EINVAL;
+	}
+
+	regmap_read(sys_mgr_base_addr, reg_offset, &ctrl);
+	ctrl &= ~(SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << reg_shift);
+	ctrl |= val << reg_shift;
+
+	regmap_write(sys_mgr_base_addr, reg_offset, ctrl);
+	return 0;
+}
+
+static void *socfpga_dwmac_probe(struct platform_device *pdev)
+{
+	struct device		*dev = &pdev->dev;
+	int			ret;
+	struct socfpga_dwmac	*dwmac;
+
+	dwmac = devm_kzalloc(dev, sizeof(*dwmac), GFP_KERNEL);
+	if (!dwmac)
+		return ERR_PTR(-ENOMEM);
+
+	ret = socfpga_dwmac_parse_data(dwmac, dev);
+	if (ret) {
+		dev_err(dev, "Unable to parse OF data\n");
+		return ERR_PTR(ret);
+	}
+
+	ret = socfpga_dwmac_setup(dwmac);
+	if (ret) {
+		dev_err(dev, "couldn't setup SoC glue (%d)\n", ret);
+		return ERR_PTR(ret);
+	}
+
+	return dwmac;
+}
+
+const struct stmmac_of_data socfpga_gmac_data = {
+	.setup = socfpga_dwmac_probe,
+};
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index f9e60d7918c4..ca01035634a7 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -136,6 +136,9 @@ extern const struct stmmac_of_data sun7i_gmac_data;
 #ifdef CONFIG_DWMAC_STI
 extern const struct stmmac_of_data sti_gmac_data;
 #endif
+#ifdef CONFIG_DWMAC_SOCFPGA
+extern const struct stmmac_of_data socfpga_gmac_data;
+#endif
 extern struct platform_driver stmmac_pltfr_driver;
 static inline int stmmac_register_platform(void)
 {
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 8fb32a80f1c1..46aef5108bea 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -37,6 +37,9 @@ static const struct of_device_id stmmac_dt_ids[] = {
 	{ .compatible = "st,stih415-dwmac", .data = &sti_gmac_data},
 	{ .compatible = "st,stih416-dwmac", .data = &sti_gmac_data},
 	{ .compatible = "st,stid127-dwmac", .data = &sti_gmac_data},
+#endif
+#ifdef CONFIG_DWMAC_SOCFPGA
+	{ .compatible = "altr,socfpga-stmmac", .data = &socfpga_gmac_data },
 #endif
 	/* SoC specific glue layers should come before generic bindings */
 	{ .compatible = "st,spear600-gmac"},
-- 
cgit v1.2.2


From b5893a08812602de164fa5ac6494f84df8d09a4f Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben.dooks@codethink.co.uk>
Date: Fri, 21 Mar 2014 12:09:14 +0100
Subject: sh_eth: ensure pm_runtime cannot suspend the device during init

The pm_rumtime work queue is causing the device to be suspended during
initialisation, thus the initialisation may not be able to access registers
properly. As the code is called from a work queue, it is possible that this
is not seen from certain configurations/builds due to the asynchronos
nature of the code.

Another issue has also been found where the network device registration
calls back into the driver thus causing further pm_runtime calls that
also caused issues with the MDIO bus code. This has now been checked
and is the only place the MDIO can be called without the device open.

Use pm_runtime_get_sync() and pm_runtime_put() to ensure that the
pm system does not suspend it during the probe() call and remove the
now unnecessary pm_runtime_resume() call. Also add a call in the error
path to call pm_runtime_disable().

This fixes the external abort that can cause /sbin/init or other such
init processed to die.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/renesas/sh_eth.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index e4bff181c910..6a9509ccd33b 100644
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -2772,6 +2772,9 @@ static int sh_eth_drv_probe(struct platform_device *pdev)
 	if (!ndev)
 		return -ENOMEM;
 
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_get_sync(&pdev->dev);
+
 	/* The sh Ether-specific entries in the device structure. */
 	ndev->base_addr = res->start;
 	devno = pdev->id;
@@ -2799,8 +2802,6 @@ static int sh_eth_drv_probe(struct platform_device *pdev)
 
 	spin_lock_init(&mdp->lock);
 	mdp->pdev = pdev;
-	pm_runtime_enable(&pdev->dev);
-	pm_runtime_resume(&pdev->dev);
 
 	if (pdev->dev.of_node)
 		pd = sh_eth_parse_dt(&pdev->dev);
@@ -2898,6 +2899,7 @@ static int sh_eth_drv_probe(struct platform_device *pdev)
 	netdev_info(ndev, "Base address at 0x%x, %pM, IRQ %d.\n",
 		    (u32)ndev->base_addr, ndev->dev_addr, ndev->irq);
 
+	pm_runtime_put(&pdev->dev);
 	platform_set_drvdata(pdev, ndev);
 
 	return ret;
@@ -2911,6 +2913,8 @@ out_release:
 	if (ndev)
 		free_netdev(ndev);
 
+	pm_runtime_put(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
 	return ret;
 }
 
-- 
cgit v1.2.2


From dae98cadf743daa480c357b7ba4410423c5f905f Mon Sep 17 00:00:00 2001
From: Yuval Mintz <Yuval.Mintz@qlogic.com>
Date: Thu, 27 Mar 2014 13:46:37 +0200
Subject: bnx2x: Fix possible memory leak on iov error flow

Commit 2dc33bbc4 "bnx2x: Remove the sriov VFOP mechanism" introduced a possible
memory leak on the error flow during multicast filters configuration.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
index df1507288b3c..5c523b32db70 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
@@ -595,6 +595,8 @@ int bnx2x_vf_mcast(struct bnx2x *bp, struct bnx2x_virtf *vf,
 	rc = bnx2x_config_mcast(bp, &mcast, BNX2X_MCAST_CMD_DEL);
 	if (rc) {
 		BNX2X_ERR("Failed to remove multicasts\n");
+		if (mc)
+			kfree(mc);
 		return rc;
 	}
 
-- 
cgit v1.2.2


From b74757944d69f8cd7de5284fc7e8649d965361ab Mon Sep 17 00:00:00 2001
From: Or Gerlitz <ogerlitz@mellanox.com>
Date: Thu, 27 Mar 2014 14:02:02 +0200
Subject: net/mlx4: USe one wrapper that returns -EPERM

When a VF issues a firmware command which is disallowed for them, the PF
rerturns -EPERM from that command wrapper. Move to use one such wrapper
instance, instead of repeating the same code on such commands.

Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/mellanox/mlx4/cmd.c              | 17 ++++-------------
 drivers/net/ethernet/mellanox/mlx4/mlx4.h             |  5 -----
 drivers/net/ethernet/mellanox/mlx4/resource_tracker.c | 10 ----------
 3 files changed, 4 insertions(+), 28 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/mellanox/mlx4/cmd.c b/drivers/net/ethernet/mellanox/mlx4/cmd.c
index 516c1dd4963b..2fd61b60a5c5 100644
--- a/drivers/net/ethernet/mellanox/mlx4/cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx4/cmd.c
@@ -800,16 +800,7 @@ static int mlx4_MAD_IFC_wrapper(struct mlx4_dev *dev, int slave,
 				    vhcr->op, MLX4_CMD_TIME_CLASS_C, MLX4_CMD_NATIVE);
 }
 
-static int MLX4_CMD_UPDATE_QP_wrapper(struct mlx4_dev *dev, int slave,
-		     struct mlx4_vhcr *vhcr,
-		     struct mlx4_cmd_mailbox *inbox,
-		     struct mlx4_cmd_mailbox *outbox,
-		     struct mlx4_cmd_info *cmd)
-{
-	return -EPERM;
-}
-
-static int MLX4_CMD_GET_OP_REQ_wrapper(struct mlx4_dev *dev, int slave,
+static int mlx4_CMD_EPERM_wrapper(struct mlx4_dev *dev, int slave,
 		     struct mlx4_vhcr *vhcr,
 		     struct mlx4_cmd_mailbox *inbox,
 		     struct mlx4_cmd_mailbox *outbox,
@@ -1258,7 +1249,7 @@ static struct mlx4_cmd_info cmd_info[] = {
 		.out_is_imm = false,
 		.encode_slave_id = false,
 		.verify = NULL,
-		.wrapper = MLX4_CMD_UPDATE_QP_wrapper
+		.wrapper = mlx4_CMD_EPERM_wrapper
 	},
 	{
 		.opcode = MLX4_CMD_GET_OP_REQ,
@@ -1267,7 +1258,7 @@ static struct mlx4_cmd_info cmd_info[] = {
 		.out_is_imm = false,
 		.encode_slave_id = false,
 		.verify = NULL,
-		.wrapper = MLX4_CMD_GET_OP_REQ_wrapper,
+		.wrapper = mlx4_CMD_EPERM_wrapper,
 	},
 	{
 		.opcode = MLX4_CMD_CONF_SPECIAL_QP,
@@ -1378,7 +1369,7 @@ static struct mlx4_cmd_info cmd_info[] = {
 		.out_is_imm = false,
 		.encode_slave_id = false,
 		.verify = NULL,
-		.wrapper = mlx4_FLOW_STEERING_IB_UC_QP_RANGE_wrapper
+		.wrapper = mlx4_CMD_EPERM_wrapper
 	},
 };
 
diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4.h b/drivers/net/ethernet/mellanox/mlx4/mlx4.h
index 9fca6c150de3..cf8be41abb36 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4.h
@@ -1247,11 +1247,6 @@ int mlx4_QP_FLOW_STEERING_DETACH_wrapper(struct mlx4_dev *dev, int slave,
 					 struct mlx4_cmd_mailbox *inbox,
 					 struct mlx4_cmd_mailbox *outbox,
 					 struct mlx4_cmd_info *cmd);
-int mlx4_FLOW_STEERING_IB_UC_QP_RANGE_wrapper(struct mlx4_dev *dev, int slave,
-					      struct mlx4_vhcr *vhcr,
-					      struct mlx4_cmd_mailbox *inbox,
-					      struct mlx4_cmd_mailbox *outbox,
-					      struct mlx4_cmd_info *cmd);
 
 int mlx4_get_mgm_entry_size(struct mlx4_dev *dev);
 int mlx4_get_qp_per_mgm(struct mlx4_dev *dev);
diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
index 2a33513a0e31..3b5f53ef29b2 100644
--- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
+++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
@@ -4015,16 +4015,6 @@ int mlx4_QUERY_IF_STAT_wrapper(struct mlx4_dev *dev, int slave,
 	return err;
 }
 
-int mlx4_FLOW_STEERING_IB_UC_QP_RANGE_wrapper(struct mlx4_dev *dev, int slave,
-					      struct mlx4_vhcr *vhcr,
-					      struct mlx4_cmd_mailbox *inbox,
-					      struct mlx4_cmd_mailbox *outbox,
-					      struct mlx4_cmd_info *cmd)
-{
-	return -EPERM;
-}
-
-
 static void detach_qp(struct mlx4_dev *dev, int slave, struct res_qp *rqp)
 {
 	struct res_gid *rgid;
-- 
cgit v1.2.2


From d18f141a1a7cfa5ffad8433e43062b05a8d1b82a Mon Sep 17 00:00:00 2001
From: Or Gerlitz <ogerlitz@mellanox.com>
Date: Thu, 27 Mar 2014 14:02:03 +0200
Subject: mlx4: Add support for CONFIG_DEV command

Introduce the CONFIG_DEV firmware command which we will use to
configure the UDP port assumed by the firmware for the VXLAN offloads.

Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/mellanox/mlx4/cmd.c |  9 +++++++
 drivers/net/ethernet/mellanox/mlx4/fw.c  | 40 ++++++++++++++++++++++++++++++++
 2 files changed, 49 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/mellanox/mlx4/cmd.c b/drivers/net/ethernet/mellanox/mlx4/cmd.c
index 2fd61b60a5c5..78099eab7673 100644
--- a/drivers/net/ethernet/mellanox/mlx4/cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx4/cmd.c
@@ -954,6 +954,15 @@ static struct mlx4_cmd_info cmd_info[] = {
 		.verify = NULL,
 		.wrapper = NULL
 	},
+	{
+		.opcode = MLX4_CMD_CONFIG_DEV,
+		.has_inbox = false,
+		.has_outbox = false,
+		.out_is_imm = false,
+		.encode_slave_id = false,
+		.verify = NULL,
+		.wrapper = mlx4_CMD_EPERM_wrapper
+	},
 	{
 		.opcode = MLX4_CMD_ALLOC_RES,
 		.has_inbox = false,
diff --git a/drivers/net/ethernet/mellanox/mlx4/fw.c b/drivers/net/ethernet/mellanox/mlx4/fw.c
index 6bd33e2fc17c..d16a4d118903 100644
--- a/drivers/net/ethernet/mellanox/mlx4/fw.c
+++ b/drivers/net/ethernet/mellanox/mlx4/fw.c
@@ -1779,6 +1779,46 @@ int mlx4_CLOSE_HCA(struct mlx4_dev *dev, int panic)
 			MLX4_CMD_NATIVE);
 }
 
+struct mlx4_config_dev {
+	__be32	update_flags;
+	__be32	rsdv1[3];
+	__be16	vxlan_udp_dport;
+	__be16	rsvd2;
+};
+
+#define MLX4_VXLAN_UDP_DPORT (1 << 0)
+
+static int mlx4_CONFIG_DEV(struct mlx4_dev *dev, struct mlx4_config_dev *config_dev)
+{
+	int err;
+	struct mlx4_cmd_mailbox *mailbox;
+
+	mailbox = mlx4_alloc_cmd_mailbox(dev);
+	if (IS_ERR(mailbox))
+		return PTR_ERR(mailbox);
+
+	memcpy(mailbox->buf, config_dev, sizeof(*config_dev));
+
+	err = mlx4_cmd(dev, mailbox->dma, 0, 0, MLX4_CMD_CONFIG_DEV,
+		       MLX4_CMD_TIME_CLASS_B, MLX4_CMD_NATIVE);
+
+	mlx4_free_cmd_mailbox(dev, mailbox);
+	return err;
+}
+
+int mlx4_config_vxlan_port(struct mlx4_dev *dev, __be16 udp_port)
+{
+	struct mlx4_config_dev config_dev;
+
+	memset(&config_dev, 0, sizeof(config_dev));
+	config_dev.update_flags    = cpu_to_be32(MLX4_VXLAN_UDP_DPORT);
+	config_dev.vxlan_udp_dport = udp_port;
+
+	return mlx4_CONFIG_DEV(dev, &config_dev);
+}
+EXPORT_SYMBOL_GPL(mlx4_config_vxlan_port);
+
+
 int mlx4_SET_ICM_SIZE(struct mlx4_dev *dev, u64 icm_size, u64 *aux_pages)
 {
 	int ret = mlx4_cmd_imm(dev, icm_size, aux_pages, 0, 0,
-- 
cgit v1.2.2


From 1b136de120dda625109f2afe1e3d04e256be9ec1 Mon Sep 17 00:00:00 2001
From: Or Gerlitz <ogerlitz@mellanox.com>
Date: Thu, 27 Mar 2014 14:02:04 +0200
Subject: net/mlx4: Implement vxlan ndo calls

Add implementation for the add/del vxlan port ndo calls, using the
CONFIG_DEV firmware command.

Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 86 +++++++++++++++++++++++++-
 drivers/net/ethernet/mellanox/mlx4/mlx4_en.h   |  3 +
 drivers/net/ethernet/mellanox/mlx4/port.c      |  5 +-
 3 files changed, 90 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
index fa5ee719e04b..82d7eb5b79cc 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
@@ -39,6 +39,7 @@
 #include <linux/hash.h>
 #include <net/ip.h>
 #include <net/busy_poll.h>
+#include <net/vxlan.h>
 
 #include <linux/mlx4/driver.h>
 #include <linux/mlx4/device.h>
@@ -1665,7 +1666,7 @@ int mlx4_en_start_port(struct net_device *dev)
 	}
 
 	if (mdev->dev->caps.tunnel_offload_mode == MLX4_TUNNEL_OFFLOAD_MODE_VXLAN) {
-		err = mlx4_SET_PORT_VXLAN(mdev->dev, priv->port, VXLAN_STEER_BY_OUTER_MAC);
+		err = mlx4_SET_PORT_VXLAN(mdev->dev, priv->port, VXLAN_STEER_BY_OUTER_MAC, 1);
 		if (err) {
 			en_err(priv, "Failed setting port L2 tunnel configuration, err %d\n",
 			       err);
@@ -1697,6 +1698,8 @@ int mlx4_en_start_port(struct net_device *dev)
 
 	mlx4_set_stats_bitmap(mdev->dev, &priv->stats_bitmap);
 
+	if (priv->mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_VXLAN_OFFLOADS)
+		vxlan_get_rx_port(dev);
 	priv->port_up = true;
 	netif_tx_start_all_queues(dev);
 	netif_device_attach(dev);
@@ -2264,6 +2267,81 @@ static int mlx4_en_get_phys_port_id(struct net_device *dev,
 	return 0;
 }
 
+static void mlx4_en_add_vxlan_offloads(struct work_struct *work)
+{
+	int ret;
+	struct mlx4_en_priv *priv = container_of(work, struct mlx4_en_priv,
+						 vxlan_add_task);
+
+	ret = mlx4_config_vxlan_port(priv->mdev->dev, priv->vxlan_port);
+	if (ret)
+		goto out;
+
+	ret = mlx4_SET_PORT_VXLAN(priv->mdev->dev, priv->port,
+				  VXLAN_STEER_BY_OUTER_MAC, 1);
+out:
+	if (ret)
+		en_err(priv, "failed setting L2 tunnel configuration ret %d\n", ret);
+}
+
+static void mlx4_en_del_vxlan_offloads(struct work_struct *work)
+{
+	int ret;
+	struct mlx4_en_priv *priv = container_of(work, struct mlx4_en_priv,
+						 vxlan_del_task);
+
+	ret = mlx4_SET_PORT_VXLAN(priv->mdev->dev, priv->port,
+				  VXLAN_STEER_BY_OUTER_MAC, 0);
+	if (ret)
+		en_err(priv, "failed setting L2 tunnel configuration ret %d\n", ret);
+
+	priv->vxlan_port = 0;
+}
+
+static void mlx4_en_add_vxlan_port(struct  net_device *dev,
+				   sa_family_t sa_family, __be16 port)
+{
+	struct mlx4_en_priv *priv = netdev_priv(dev);
+	__be16 current_port;
+
+	if (!(priv->mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_VXLAN_OFFLOADS))
+		return;
+
+	if (sa_family == AF_INET6)
+		return;
+
+	current_port = priv->vxlan_port;
+	if (current_port && current_port != port) {
+		en_warn(priv, "vxlan port %d configured, can't add port %d\n",
+			ntohs(current_port), ntohs(port));
+		return;
+	}
+
+	priv->vxlan_port = port;
+	queue_work(priv->mdev->workqueue, &priv->vxlan_add_task);
+}
+
+static void mlx4_en_del_vxlan_port(struct  net_device *dev,
+				   sa_family_t sa_family, __be16 port)
+{
+	struct mlx4_en_priv *priv = netdev_priv(dev);
+	__be16 current_port;
+
+	if (priv->mdev->dev->caps.tunnel_offload_mode != MLX4_TUNNEL_OFFLOAD_MODE_VXLAN)
+		return;
+
+	if (sa_family == AF_INET6)
+		return;
+
+	current_port = priv->vxlan_port;
+	if (current_port != port) {
+		en_dbg(DRV, priv, "vxlan port %d isn't configured, ignoring\n", ntohs(port));
+		return;
+	}
+
+	queue_work(priv->mdev->workqueue, &priv->vxlan_del_task);
+}
+
 static const struct net_device_ops mlx4_netdev_ops = {
 	.ndo_open		= mlx4_en_open,
 	.ndo_stop		= mlx4_en_close,
@@ -2290,6 +2368,8 @@ static const struct net_device_ops mlx4_netdev_ops = {
 	.ndo_busy_poll		= mlx4_en_low_latency_recv,
 #endif
 	.ndo_get_phys_port_id	= mlx4_en_get_phys_port_id,
+	.ndo_add_vxlan_port	= mlx4_en_add_vxlan_port,
+	.ndo_del_vxlan_port	= mlx4_en_del_vxlan_port,
 };
 
 static const struct net_device_ops mlx4_netdev_ops_master = {
@@ -2381,6 +2461,8 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
 	INIT_WORK(&priv->linkstate_task, mlx4_en_linkstate);
 	INIT_DELAYED_WORK(&priv->stats_task, mlx4_en_do_get_stats);
 	INIT_DELAYED_WORK(&priv->service_task, mlx4_en_service_task);
+	INIT_WORK(&priv->vxlan_add_task, mlx4_en_add_vxlan_offloads);
+	INIT_WORK(&priv->vxlan_del_task, mlx4_en_del_vxlan_offloads);
 #ifdef CONFIG_MLX4_EN_DCB
 	if (!mlx4_is_slave(priv->mdev->dev)) {
 		if (mdev->dev->caps.flags & MLX4_DEV_CAP_FLAG_SET_ETH_SCHED) {
@@ -2514,7 +2596,7 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
 	}
 
 	if (mdev->dev->caps.tunnel_offload_mode == MLX4_TUNNEL_OFFLOAD_MODE_VXLAN) {
-		err = mlx4_SET_PORT_VXLAN(mdev->dev, priv->port, VXLAN_STEER_BY_OUTER_MAC);
+		err = mlx4_SET_PORT_VXLAN(mdev->dev, priv->port, VXLAN_STEER_BY_OUTER_MAC, 1);
 		if (err) {
 			en_err(priv, "Failed setting port L2 tunnel configuration, err %d\n",
 			       err);
diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
index 69e1f36858e0..36fc2a2b24c3 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
@@ -559,6 +559,8 @@ struct mlx4_en_priv {
 	struct work_struct linkstate_task;
 	struct delayed_work stats_task;
 	struct delayed_work service_task;
+	struct work_struct vxlan_add_task;
+	struct work_struct vxlan_del_task;
 	struct mlx4_en_perf_stats pstats;
 	struct mlx4_en_pkt_stats pkstats;
 	struct mlx4_en_port_stats port_stats;
@@ -585,6 +587,7 @@ struct mlx4_en_priv {
 	struct hlist_head filter_hash[1 << MLX4_EN_FILTER_HASH_SHIFT];
 #endif
 	u64 tunnel_reg_id;
+	__be16 vxlan_port;
 };
 
 enum mlx4_en_wol {
diff --git a/drivers/net/ethernet/mellanox/mlx4/port.c b/drivers/net/ethernet/mellanox/mlx4/port.c
index 2705b9ab9463..cfcad26ed40f 100644
--- a/drivers/net/ethernet/mellanox/mlx4/port.c
+++ b/drivers/net/ethernet/mellanox/mlx4/port.c
@@ -988,7 +988,7 @@ struct mlx4_set_port_vxlan_context {
 	u8	steering;
 };
 
-int mlx4_SET_PORT_VXLAN(struct mlx4_dev *dev, u8 port, u8 steering)
+int mlx4_SET_PORT_VXLAN(struct mlx4_dev *dev, u8 port, u8 steering, int enable)
 {
 	int err;
 	u32 in_mod;
@@ -1002,7 +1002,8 @@ int mlx4_SET_PORT_VXLAN(struct mlx4_dev *dev, u8 port, u8 steering)
 	memset(context, 0, sizeof(*context));
 
 	context->modify_flags = VXLAN_ENABLE_MODIFY | VXLAN_STEERING_MODIFY;
-	context->enable_flags = VXLAN_ENABLE;
+	if (enable)
+		context->enable_flags = VXLAN_ENABLE;
 	context->steering  = steering;
 
 	in_mod = MLX4_SET_PORT_VXLAN << 8 | port;
-- 
cgit v1.2.2


From 0183aa626f467dad278050f0918a243164ae5916 Mon Sep 17 00:00:00 2001
From: Hariprasad Shenai <hariprasad@chelsio.com>
Date: Thu, 27 Mar 2014 18:17:09 +0530
Subject: cxgb4: Adds device ID for few more Chelsio Adapters

Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index a7a41e0f3b01..6fe58913403a 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -256,6 +256,12 @@ static DEFINE_PCI_DEVICE_TABLE(cxgb4_pci_tbl) = {
 	CH_DEVICE(0x5013, 4),
 	CH_DEVICE(0x5014, 4),
 	CH_DEVICE(0x5015, 4),
+	CH_DEVICE(0x5080, 4),
+	CH_DEVICE(0x5081, 4),
+	CH_DEVICE(0x5082, 4),
+	CH_DEVICE(0x5083, 4),
+	CH_DEVICE(0x5084, 4),
+	CH_DEVICE(0x5085, 4),
 	CH_DEVICE(0x5401, 4),
 	CH_DEVICE(0x5402, 4),
 	CH_DEVICE(0x5403, 4),
@@ -277,6 +283,12 @@ static DEFINE_PCI_DEVICE_TABLE(cxgb4_pci_tbl) = {
 	CH_DEVICE(0x5413, 4),
 	CH_DEVICE(0x5414, 4),
 	CH_DEVICE(0x5415, 4),
+	CH_DEVICE(0x5480, 4),
+	CH_DEVICE(0x5481, 4),
+	CH_DEVICE(0x5482, 4),
+	CH_DEVICE(0x5483, 4),
+	CH_DEVICE(0x5484, 4),
+	CH_DEVICE(0x5485, 4),
 	{ 0, }
 };
 
-- 
cgit v1.2.2


From 63ea7dce8ce6de8d9d6b36b835219b38655b13e8 Mon Sep 17 00:00:00 2001
From: Hariprasad Shenai <hariprasad@chelsio.com>
Date: Thu, 27 Mar 2014 18:17:10 +0530
Subject: cxgb4vf: Adds device Id for few more Chelsio adapters

Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
index 1d0fe9b60312..52859288de7b 100644
--- a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
@@ -2944,6 +2944,14 @@ static DEFINE_PCI_DEVICE_TABLE(cxgb4vf_pci_tbl) = {
 	CH_DEVICE(0x5811, 0),   /* T520-lp-cr */
 	CH_DEVICE(0x5812, 0),   /* T560-cr */
 	CH_DEVICE(0x5813, 0),   /* T580-cr */
+	CH_DEVICE(0x5814, 0),   /* T580-so-cr */
+	CH_DEVICE(0x5815, 0),   /* T502-bt */
+	CH_DEVICE(0x5880, 0),
+	CH_DEVICE(0x5881, 0),
+	CH_DEVICE(0x5882, 0),
+	CH_DEVICE(0x5883, 0),
+	CH_DEVICE(0x5884, 0),
+	CH_DEVICE(0x5885, 0),
 	{ 0, }
 };
 
-- 
cgit v1.2.2


From b7d47ca2fdfd3b613b800c923553a8437dd8da40 Mon Sep 17 00:00:00 2001
From: Daniel Borkmann <dborkman@redhat.com>
Date: Thu, 27 Mar 2014 16:34:59 +0100
Subject: net: nlmon: flag nlmon devs with LLTX/SG

As in xmit path we merely update statistics and free the skb, we
can mark the device with LLTX feature, so that upper layers can
avoid taking the single txq lock on xmit. While at it, also add
missing NETIF_F_SG.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/nlmon.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/nlmon.c b/drivers/net/nlmon.c
index 6929b03ec638..34924dfadd00 100644
--- a/drivers/net/nlmon.c
+++ b/drivers/net/nlmon.c
@@ -136,7 +136,8 @@ static void nlmon_setup(struct net_device *dev)
 	dev->ethtool_ops = &nlmon_ethtool_ops;
 	dev->destructor	= free_netdev;
 
-	dev->features = NETIF_F_FRAGLIST | NETIF_F_HIGHDMA;
+	dev->features = NETIF_F_SG | NETIF_F_FRAGLIST |
+			NETIF_F_HIGHDMA | NETIF_F_LLTX;
 	dev->flags = IFF_NOARP;
 
 	/* That's rather a softlimit here, which, of course,
-- 
cgit v1.2.2


From c3f0dd38996d5f4e7c681099ba18cc1587155edb Mon Sep 17 00:00:00 2001
From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Date: Thu, 27 Mar 2014 11:39:29 +0100
Subject: net: mvneta: use devm_ioremap_resource() instead of of_iomap()

The mvneta driver currently uses of_iomap(), which has two drawbacks:
it doesn't request the resource, and it isn't devm-style so some error
handling is needed.

This commit switches to use devm_ioremap_resource() instead, which
automatically requests the resource (so the I/O registers region shows
up properly in /proc/iomem), and also is devm-style, which allows to
get rid of some error handling to unmap the I/O registers region.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/marvell/mvneta.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index f3afcbdbb725..bcce0b437722 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -22,6 +22,7 @@
 #include <linux/interrupt.h>
 #include <net/ip.h>
 #include <net/ipv6.h>
+#include <linux/io.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
 #include <linux/of_mdio.h>
@@ -2774,6 +2775,7 @@ static void mvneta_port_power_up(struct mvneta_port *pp, int phy_mode)
 static int mvneta_probe(struct platform_device *pdev)
 {
 	const struct mbus_dram_target_info *dram_target_info;
+	struct resource *res;
 	struct device_node *dn = pdev->dev.of_node;
 	struct device_node *phy_node;
 	u32 phy_addr;
@@ -2837,9 +2839,10 @@ static int mvneta_probe(struct platform_device *pdev)
 
 	clk_prepare_enable(pp->clk);
 
-	pp->base = of_iomap(dn, 0);
-	if (pp->base == NULL) {
-		err = -ENOMEM;
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	pp->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(pp->base)) {
+		err = PTR_ERR(pp->base);
 		goto err_clk;
 	}
 
@@ -2847,7 +2850,7 @@ static int mvneta_probe(struct platform_device *pdev)
 	pp->stats = netdev_alloc_pcpu_stats(struct mvneta_pcpu_stats);
 	if (!pp->stats) {
 		err = -ENOMEM;
-		goto err_unmap;
+		goto err_clk;
 	}
 
 	dt_mac_addr = of_get_mac_address(dn);
@@ -2906,8 +2909,6 @@ err_deinit:
 	mvneta_deinit(pp);
 err_free_stats:
 	free_percpu(pp->stats);
-err_unmap:
-	iounmap(pp->base);
 err_clk:
 	clk_disable_unprepare(pp->clk);
 err_free_irq:
@@ -2927,7 +2928,6 @@ static int mvneta_remove(struct platform_device *pdev)
 	mvneta_deinit(pp);
 	clk_disable_unprepare(pp->clk);
 	free_percpu(pp->stats);
-	iounmap(pp->base);
 	irq_dispose_mapping(dev->irq);
 	free_netdev(dev);
 
-- 
cgit v1.2.2


From 4067caba454b25ce79f8a09834551404f79686dd Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?fran=C3=A7ois=20romieu?= <romieu@fr.zoreil.com>
Date: Sat, 29 Mar 2014 12:26:14 +0100
Subject: atl1: remove open-coded skb_cow_head.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Chris Snook <chris.snook@gmail.com>
Cc: Jay Cliburn <jcliburn@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/atheros/atlx/atl1.c | 15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/atheros/atlx/atl1.c b/drivers/net/ethernet/atheros/atlx/atl1.c
index 287272dd69da..dfd0e91fa726 100644
--- a/drivers/net/ethernet/atheros/atlx/atl1.c
+++ b/drivers/net/ethernet/atheros/atlx/atl1.c
@@ -2118,18 +2118,17 @@ static u16 atl1_tpd_avail(struct atl1_tpd_ring *tpd_ring)
 }
 
 static int atl1_tso(struct atl1_adapter *adapter, struct sk_buff *skb,
-	struct tx_packet_desc *ptpd)
+		    struct tx_packet_desc *ptpd)
 {
 	u8 hdr_len, ip_off;
 	u32 real_len;
-	int err;
 
 	if (skb_shinfo(skb)->gso_size) {
-		if (skb_header_cloned(skb)) {
-			err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
-			if (unlikely(err))
-				return -1;
-		}
+		int err;
+
+		err = skb_cow_head(skb, 0);
+		if (err < 0)
+			return err;
 
 		if (skb->protocol == htons(ETH_P_IP)) {
 			struct iphdr *iph = ip_hdr(skb);
@@ -2175,7 +2174,7 @@ static int atl1_tso(struct atl1_adapter *adapter, struct sk_buff *skb,
 			return 3;
 		}
 	}
-	return false;
+	return 0;
 }
 
 static int atl1_tx_csum(struct atl1_adapter *adapter, struct sk_buff *skb,
-- 
cgit v1.2.2


From 0f5c113c5adb56c1352c05155dd4a711b68a839b Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?fran=C3=A7ois=20romieu?= <romieu@fr.zoreil.com>
Date: Sat, 29 Mar 2014 12:26:15 +0100
Subject: atl1c: remove open-coded skb_cow_head.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Jay Cliburn <jcliburn@gmail.com>
Cc: Chris Snook <chris.snook@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/atheros/atl1c/atl1c_main.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
index 31f262302128..e11bf18fbbd1 100644
--- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
@@ -1973,17 +1973,17 @@ static int atl1c_tso_csum(struct atl1c_adapter *adapter,
 			  enum atl1c_trans_queue type)
 {
 	struct pci_dev *pdev = adapter->pdev;
+	unsigned short offload_type;
 	u8 hdr_len;
 	u32 real_len;
-	unsigned short offload_type;
-	int err;
 
 	if (skb_is_gso(skb)) {
-		if (skb_header_cloned(skb)) {
-			err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
-			if (unlikely(err))
-				return -1;
-		}
+		int err;
+
+		err = skb_cow_head(skb, 0);
+		if (err < 0)
+			return err;
+
 		offload_type = skb_shinfo(skb)->gso_type;
 
 		if (offload_type & SKB_GSO_TCPV4) {
-- 
cgit v1.2.2


From d8e4435e1644308b8f024630bdf5ecd111bafe20 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?fran=C3=A7ois=20romieu?= <romieu@fr.zoreil.com>
Date: Sat, 29 Mar 2014 12:26:16 +0100
Subject: atl1e: remove open-coded skb_cow_head.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Chris Snook <chris.snook@gmail.com>
Cc: Jay Cliburn <jcliburn@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/atheros/atl1e/atl1e_main.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/atheros/atl1e/atl1e_main.c b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c
index 422aab27ea1b..4345332533ad 100644
--- a/drivers/net/ethernet/atheros/atl1e/atl1e_main.c
+++ b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c
@@ -1641,17 +1641,17 @@ static u16 atl1e_cal_tdp_req(const struct sk_buff *skb)
 static int atl1e_tso_csum(struct atl1e_adapter *adapter,
 		       struct sk_buff *skb, struct atl1e_tpd_desc *tpd)
 {
+	unsigned short offload_type;
 	u8 hdr_len;
 	u32 real_len;
-	unsigned short offload_type;
-	int err;
 
 	if (skb_is_gso(skb)) {
-		if (skb_header_cloned(skb)) {
-			err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
-			if (unlikely(err))
-				return -1;
-		}
+		int err;
+
+		err = skb_cow_head(skb, 0);
+		if (err < 0)
+			return err;
+
 		offload_type = skb_shinfo(skb)->gso_type;
 
 		if (offload_type & SKB_GSO_TCPV4) {
-- 
cgit v1.2.2


From ba4e6d19202a6aaa7207fde08310961df5197981 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?fran=C3=A7ois=20romieu?= <romieu@fr.zoreil.com>
Date: Sat, 29 Mar 2014 12:26:26 +0100
Subject: jme: remove open-coded skb_cow_head.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/jme.c | 16 ++--------------
 1 file changed, 2 insertions(+), 14 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/jme.c b/drivers/net/ethernet/jme.c
index 14ff8d64257d..b0c6050479eb 100644
--- a/drivers/net/ethernet/jme.c
+++ b/drivers/net/ethernet/jme.c
@@ -2053,19 +2053,6 @@ jme_map_tx_skb(struct jme_adapter *jme, struct sk_buff *skb, int idx)
 
 }
 
-static int
-jme_expand_header(struct jme_adapter *jme, struct sk_buff *skb)
-{
-	if (unlikely(skb_shinfo(skb)->gso_size &&
-			skb_header_cloned(skb) &&
-			pskb_expand_head(skb, 0, 0, GFP_ATOMIC))) {
-		dev_kfree_skb_any(skb);
-		return -1;
-	}
-
-	return 0;
-}
-
 static int
 jme_tx_tso(struct sk_buff *skb, __le16 *mss, u8 *flags)
 {
@@ -2225,7 +2212,8 @@ jme_start_xmit(struct sk_buff *skb, struct net_device *netdev)
 	struct jme_adapter *jme = netdev_priv(netdev);
 	int idx;
 
-	if (unlikely(jme_expand_header(jme, skb))) {
+	if (unlikely(skb_is_gso(skb) && skb_cow_head(skb, 0))) {
+		dev_kfree_skb_any(skb);
 		++(NET_STAT(jme).tx_dropped);
 		return NETDEV_TX_OK;
 	}
-- 
cgit v1.2.2


From bb9689e631a6e5bb8544773168a05fcd49828d08 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?fran=C3=A7ois=20romieu?= <romieu@fr.zoreil.com>
Date: Sat, 29 Mar 2014 12:26:27 +0100
Subject: qlge: remove open-coded skb_cow_head.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Cc: Shahed Shaikh <shahed.shaikh@qlogic.com>
Cc: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/qlogic/qlge/qlge_main.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/qlogic/qlge/qlge_main.c b/drivers/net/ethernet/qlogic/qlge/qlge_main.c
index adf87d26e68f..5b63405f9d3c 100644
--- a/drivers/net/ethernet/qlogic/qlge/qlge_main.c
+++ b/drivers/net/ethernet/qlogic/qlge/qlge_main.c
@@ -2556,11 +2556,10 @@ static int ql_tso(struct sk_buff *skb, struct ob_mac_tso_iocb_req *mac_iocb_ptr)
 
 	if (skb_is_gso(skb)) {
 		int err;
-		if (skb_header_cloned(skb)) {
-			err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
-			if (err)
-				return err;
-		}
+
+		err = skb_cow_head(skb, 0);
+		if (err < 0)
+			return err;
 
 		mac_iocb_ptr->opcode = OPCODE_OB_MAC_TSO_IOCB;
 		mac_iocb_ptr->flags3 |= OB_MAC_TSO_IOCB_IC;
-- 
cgit v1.2.2


From b13a8a99897a15b5f2f10722ac8d443df414f630 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?fran=C3=A7ois=20romieu?= <romieu@fr.zoreil.com>
Date: Sat, 29 Mar 2014 12:26:28 +0100
Subject: bna: remove open-coded skb_cow_head.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Rasesh Mody <rmody@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/brocade/bna/bnad.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/brocade/bna/bnad.c b/drivers/net/ethernet/brocade/bna/bnad.c
index a881e982a084..675550fe8ee9 100644
--- a/drivers/net/ethernet/brocade/bna/bnad.c
+++ b/drivers/net/ethernet/brocade/bna/bnad.c
@@ -2496,12 +2496,10 @@ bnad_tso_prepare(struct bnad *bnad, struct sk_buff *skb)
 {
 	int err;
 
-	if (skb_header_cloned(skb)) {
-		err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
-		if (err) {
-			BNAD_UPDATE_CTR(bnad, tso_err);
-			return err;
-		}
+	err = skb_cow_head(skb, 0);
+	if (err < 0) {
+		BNAD_UPDATE_CTR(bnad, tso_err);
+		return err;
 	}
 
 	/*
-- 
cgit v1.2.2


From 105dcb5979e70fee7a4dbd6505ec89d406258f1a Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?fran=C3=A7ois=20romieu?= <romieu@fr.zoreil.com>
Date: Sat, 29 Mar 2014 12:26:29 +0100
Subject: tg3: remove open-coded skb_cow_head.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Nithin Nayak Sujir <nsujir@broadcom.com>
Cc: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/tg3.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index 1ac461a7d949..22586e92da0e 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -7918,8 +7918,7 @@ static netdev_tx_t tg3_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		struct iphdr *iph;
 		u32 tcp_opt_len, hdr_len;
 
-		if (skb_header_cloned(skb) &&
-		    pskb_expand_head(skb, 0, 0, GFP_ATOMIC))
+		if (skb_cow_head(skb, 0))
 			goto drop;
 
 		iph = ip_hdr(skb);
-- 
cgit v1.2.2


From b06626b899f9ed4fcd686c5185f7313d7119ef98 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?fran=C3=A7ois=20romieu?= <romieu@fr.zoreil.com>
Date: Sat, 29 Mar 2014 12:26:30 +0100
Subject: wimax/i2400m: remove open-coded skb_cow_head.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/wimax/i2400m/netdev.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wimax/i2400m/netdev.c b/drivers/net/wimax/i2400m/netdev.c
index 48896138418f..a9970f1af976 100644
--- a/drivers/net/wimax/i2400m/netdev.c
+++ b/drivers/net/wimax/i2400m/netdev.c
@@ -374,8 +374,7 @@ netdev_tx_t i2400m_hard_start_xmit(struct sk_buff *skb,
 
 	d_fnstart(3, dev, "(skb %p net_dev %p)\n", skb, net_dev);
 
-	if (skb_header_cloned(skb) && 
-	    pskb_expand_head(skb, 0, 0, GFP_ATOMIC))
+	if (skb_cow_head(skb, 0))
 		goto drop;
 
 	if (i2400m->state == I2400M_SS_IDLE)
-- 
cgit v1.2.2


From a8779ec1c5e60548b7b661a8d74a8cecf7775690 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Thu, 27 Mar 2014 15:36:38 -0700
Subject: netpoll: Remove gfp parameter from __netpoll_setup

The gfp parameter was added in:
commit 47be03a28cc6c80e3aa2b3e8ed6d960ff0c5c0af
Author: Amerigo Wang <amwang@redhat.com>
Date:   Fri Aug 10 01:24:37 2012 +0000

    netpoll: use GFP_ATOMIC in slave_enable_netpoll() and __netpoll_setup()

    slave_enable_netpoll() and __netpoll_setup() may be called
    with read_lock() held, so should use GFP_ATOMIC to allocate
    memory. Eric suggested to pass gfp flags to __netpoll_setup().

    Cc: Eric Dumazet <eric.dumazet@gmail.com>
    Cc: "David S. Miller" <davem@davemloft.net>
    Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
    Signed-off-by: Eric Dumazet <edumazet@google.com>
    Signed-off-by: Cong Wang <amwang@redhat.com>
    Signed-off-by: David S. Miller <davem@davemloft.net>

The reason for the gfp parameter was removed in:
commit c4cdef9b7183159c23c7302aaf270d64c549f557
Author: dingtianhong <dingtianhong@huawei.com>
Date:   Tue Jul 23 15:25:27 2013 +0800

    bonding: don't call slave_xxx_netpoll under spinlocks

    The slave_xxx_netpoll will call synchronize_rcu_bh(),
    so the function may schedule and sleep, it should't be
    called under spinlocks.

    bond_netpoll_setup() and bond_netpoll_cleanup() are always
    protected by rtnl lock, it is no need to take the read lock,
    as the slave list couldn't be changed outside rtnl lock.

    Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
    Cc: Jay Vosburgh <fubar@us.ibm.com>
    Cc: Andy Gospodarek <andy@greyhouse.net>
    Signed-off-by: David S. Miller <davem@davemloft.net>

Nothing else that calls __netpoll_setup or ndo_netpoll_setup
requires a gfp paramter, so remove the gfp parameter from both
of these functions making the code clearer.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_main.c |  6 +++---
 drivers/net/team/team.c         | 16 +++++++---------
 2 files changed, 10 insertions(+), 12 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 5be34b72a048..95a6ca7d9e51 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -922,12 +922,12 @@ static inline int slave_enable_netpoll(struct slave *slave)
 	struct netpoll *np;
 	int err = 0;
 
-	np = kzalloc(sizeof(*np), GFP_ATOMIC);
+	np = kzalloc(sizeof(*np), GFP_KERNEL);
 	err = -ENOMEM;
 	if (!np)
 		goto out;
 
-	err = __netpoll_setup(np, slave->dev, GFP_ATOMIC);
+	err = __netpoll_setup(np, slave->dev);
 	if (err) {
 		kfree(np);
 		goto out;
@@ -962,7 +962,7 @@ static void bond_netpoll_cleanup(struct net_device *bond_dev)
 			slave_disable_netpoll(slave);
 }
 
-static int bond_netpoll_setup(struct net_device *dev, struct netpoll_info *ni, gfp_t gfp)
+static int bond_netpoll_setup(struct net_device *dev, struct netpoll_info *ni)
 {
 	struct bonding *bond = netdev_priv(dev);
 	struct list_head *iter;
diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c
index 2b1a1d61072c..33008c1d1d67 100644
--- a/drivers/net/team/team.c
+++ b/drivers/net/team/team.c
@@ -1031,8 +1031,7 @@ static void team_port_leave(struct team *team, struct team_port *port)
 }
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
-static int team_port_enable_netpoll(struct team *team, struct team_port *port,
-				    gfp_t gfp)
+static int team_port_enable_netpoll(struct team *team, struct team_port *port)
 {
 	struct netpoll *np;
 	int err;
@@ -1040,11 +1039,11 @@ static int team_port_enable_netpoll(struct team *team, struct team_port *port,
 	if (!team->dev->npinfo)
 		return 0;
 
-	np = kzalloc(sizeof(*np), gfp);
+	np = kzalloc(sizeof(*np), GFP_KERNEL);
 	if (!np)
 		return -ENOMEM;
 
-	err = __netpoll_setup(np, port->dev, gfp);
+	err = __netpoll_setup(np, port->dev);
 	if (err) {
 		kfree(np);
 		return err;
@@ -1067,8 +1066,7 @@ static void team_port_disable_netpoll(struct team_port *port)
 	kfree(np);
 }
 #else
-static int team_port_enable_netpoll(struct team *team, struct team_port *port,
-				    gfp_t gfp)
+static int team_port_enable_netpoll(struct team *team, struct team_port *port)
 {
 	return 0;
 }
@@ -1156,7 +1154,7 @@ static int team_port_add(struct team *team, struct net_device *port_dev)
 		goto err_vids_add;
 	}
 
-	err = team_port_enable_netpoll(team, port, GFP_KERNEL);
+	err = team_port_enable_netpoll(team, port);
 	if (err) {
 		netdev_err(dev, "Failed to enable netpoll on device %s\n",
 			   portname);
@@ -1850,7 +1848,7 @@ static void team_netpoll_cleanup(struct net_device *dev)
 }
 
 static int team_netpoll_setup(struct net_device *dev,
-			      struct netpoll_info *npifo, gfp_t gfp)
+			      struct netpoll_info *npifo)
 {
 	struct team *team = netdev_priv(dev);
 	struct team_port *port;
@@ -1858,7 +1856,7 @@ static int team_netpoll_setup(struct net_device *dev,
 
 	mutex_lock(&team->lock);
 	list_for_each_entry(port, &team->port_list, list) {
-		err = team_port_enable_netpoll(team, port, gfp);
+		err = team_port_enable_netpoll(team, port);
 		if (err) {
 			__team_netpoll_cleanup(team);
 			break;
-- 
cgit v1.2.2


From 77a9939426f7a3f35f460afc9b11f1fe45955409 Mon Sep 17 00:00:00 2001
From: Zhao Qiang <B45475@freescale.com>
Date: Fri, 28 Mar 2014 15:39:41 +0800
Subject: phy/at8031: enable at8031 to work on interrupt mode

The at8031 can work on polling mode and interrupt mode.
Add ack_interrupt and config intr funcs to enable
interrupt mode for it.

Signed-off-by: Zhao Qiang <B45475@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/at803x.c | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index bc71947b1ec3..643464d5a727 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -27,6 +27,9 @@
 #define AT803X_MMD_ACCESS_CONTROL		0x0D
 #define AT803X_MMD_ACCESS_CONTROL_DATA		0x0E
 #define AT803X_FUNC_DATA			0x4003
+#define AT803X_INER				0x0012
+#define AT803X_INER_INIT			0xec00
+#define AT803X_INSR				0x0013
 #define AT803X_DEBUG_ADDR			0x1D
 #define AT803X_DEBUG_DATA			0x1E
 #define AT803X_DEBUG_SYSTEM_MODE_CTRL		0x05
@@ -191,6 +194,31 @@ static int at803x_config_init(struct phy_device *phydev)
 	return 0;
 }
 
+static int at803x_ack_interrupt(struct phy_device *phydev)
+{
+	int err;
+
+	err = phy_read(phydev, AT803X_INSR);
+
+	return (err < 0) ? err : 0;
+}
+
+static int at803x_config_intr(struct phy_device *phydev)
+{
+	int err;
+	int value;
+
+	value = phy_read(phydev, AT803X_INER);
+
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+		err = phy_write(phydev, AT803X_INER,
+				value | AT803X_INER_INIT);
+	else
+		err = phy_write(phydev, AT803X_INER, 0);
+
+	return err;
+}
+
 static struct phy_driver at803x_driver[] = {
 {
 	/* ATHEROS 8035 */
@@ -240,6 +268,8 @@ static struct phy_driver at803x_driver[] = {
 	.flags		= PHY_HAS_INTERRUPT,
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= genphy_read_status,
+	.ack_interrupt  = &at803x_ack_interrupt,
+	.config_intr    = &at803x_config_intr,
 	.driver		= {
 		.owner = THIS_MODULE,
 	},
-- 
cgit v1.2.2


From 0576eddf24df716d8570ef8ca11452a9f98eaab2 Mon Sep 17 00:00:00 2001
From: Paul Durrant <Paul.Durrant@citrix.com>
Date: Fri, 28 Mar 2014 11:39:05 +0000
Subject: xen-netback: remove pointless clause from if statement

This patch removes a test in start_new_rx_buffer() that checks whether
a copy operation is less than MAX_BUFFER_OFFSET in length, since
MAX_BUFFER_OFFSET is defined to be PAGE_SIZE and the only caller of
start_new_rx_buffer() already limits copy operations to PAGE_SIZE or less.

Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Cc: Sander Eikelenboom <linux@eikelenboom.it>
Reported-By: Sander Eikelenboom <linux@eikelenboom.it>
Tested-By: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/xen-netback/netback.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c
index 438d0c09b7e6..72314c7998fc 100644
--- a/drivers/net/xen-netback/netback.c
+++ b/drivers/net/xen-netback/netback.c
@@ -192,8 +192,8 @@ static bool start_new_rx_buffer(int offset, unsigned long size, int head)
 	 * into multiple copies tend to give large frags their
 	 * own buffers as before.
 	 */
-	if ((offset + size > MAX_BUFFER_OFFSET) &&
-	    (size <= MAX_BUFFER_OFFSET) && offset && !head)
+	BUG_ON(size > MAX_BUFFER_OFFSET);
+	if ((offset + size > MAX_BUFFER_OFFSET) && offset && !head)
 		return true;
 
 	return false;
-- 
cgit v1.2.2


From a02eb4732cf975d7fc71b6d1a71c058c9988b949 Mon Sep 17 00:00:00 2001
From: Paul Durrant <Paul.Durrant@citrix.com>
Date: Fri, 28 Mar 2014 11:39:06 +0000
Subject: xen-netback: worse-case estimate in xenvif_rx_action is
 underestimating

The worse-case estimate for skb ring slot usage in xenvif_rx_action()
fails to take fragment page_offset into account. The page_offset does,
however, affect the number of times the fragmentation code calls
start_new_rx_buffer() (i.e. consume another slot) and the worse-case
should assume that will always return true. This patch adds the page_offset
into the DIV_ROUND_UP for each frag.

Unfortunately some frontends aggressively limit the number of requests
they post into the shared ring so to avoid an estimate that is 'too'
pessimal it is capped at MAX_SKB_FRAGS.

Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Cc: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/xen-netback/netback.c | 21 ++++++++++++++++++++-
 1 file changed, 20 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c
index 72314c7998fc..573f3e81e5d2 100644
--- a/drivers/net/xen-netback/netback.c
+++ b/drivers/net/xen-netback/netback.c
@@ -493,9 +493,28 @@ static void xenvif_rx_action(struct xenvif *vif)
 						PAGE_SIZE);
 		for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
 			unsigned int size;
+			unsigned int offset;
+
 			size = skb_frag_size(&skb_shinfo(skb)->frags[i]);
-			max_slots_needed += DIV_ROUND_UP(size, PAGE_SIZE);
+			offset = skb_shinfo(skb)->frags[i].page_offset;
+
+			/* For a worse-case estimate we need to factor in
+			 * the fragment page offset as this will affect the
+			 * number of times xenvif_gop_frag_copy() will
+			 * call start_new_rx_buffer().
+			 */
+			max_slots_needed += DIV_ROUND_UP(offset + size,
+							 PAGE_SIZE);
 		}
+
+		/* To avoid the estimate becoming too pessimal for some
+		 * frontends that limit posted rx requests, cap the estimate
+		 * at MAX_SKB_FRAGS.
+		 */
+		if (max_slots_needed > MAX_SKB_FRAGS)
+			max_slots_needed = MAX_SKB_FRAGS;
+
+		/* We may need one more slot for GSO metadata */
 		if (skb_is_gso(skb) &&
 		   (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV4 ||
 		    skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6))
-- 
cgit v1.2.2


From 1425c7a4e8d3d2eebf308bcbdc3fa3c1247686b4 Mon Sep 17 00:00:00 2001
From: Paul Durrant <Paul.Durrant@citrix.com>
Date: Fri, 28 Mar 2014 11:39:07 +0000
Subject: xen-netback: BUG_ON in xenvif_rx_action() not catching overflow

The BUG_ON to catch ring overflow in xenvif_rx_action() makes the assumption
that meta_slots_used == ring slots used. This is not necessarily the case
for GSO packets, because the non-prefix GSO protocol consumes one more ring
slot than meta-slot for the 'extra_info'. This patch changes the test to
actually check ring slots.

Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Cc: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/xen-netback/netback.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c
index 573f3e81e5d2..cd0bd95ccc14 100644
--- a/drivers/net/xen-netback/netback.c
+++ b/drivers/net/xen-netback/netback.c
@@ -482,6 +482,8 @@ static void xenvif_rx_action(struct xenvif *vif)
 
 	while ((skb = skb_dequeue(&vif->rx_queue)) != NULL) {
 		RING_IDX max_slots_needed;
+		RING_IDX old_req_cons;
+		RING_IDX ring_slots_used;
 		int i;
 
 		/* We need a cheap worse case estimate for the number of
@@ -530,8 +532,12 @@ static void xenvif_rx_action(struct xenvif *vif)
 			vif->rx_last_skb_slots = 0;
 
 		sco = (struct skb_cb_overlay *)skb->cb;
+
+		old_req_cons = vif->rx.req_cons;
 		sco->meta_slots_used = xenvif_gop_skb(skb, &npo);
-		BUG_ON(sco->meta_slots_used > max_slots_needed);
+		ring_slots_used = vif->rx.req_cons - old_req_cons;
+
+		BUG_ON(ring_slots_used > max_slots_needed);
 
 		__skb_queue_tail(&rxq, skb);
 	}
-- 
cgit v1.2.2


From 164d8c6665213c931645578310256da7b1259331 Mon Sep 17 00:00:00 2001
From: Daniel Borkmann <dborkman@redhat.com>
Date: Fri, 28 Mar 2014 18:58:22 +0100
Subject: net: ptp: do not reimplement PTP/BPF classifier

There are currently pch_gbe, cpts, and ixp4xx_eth drivers that open-code
and reimplement a BPF classifier for the PTP protocol. Since all of them
effectively do the very same thing and load the very same PTP/BPF filter,
we can just consolidate that code by introducing ptp_classify_raw() in
the time-stamping core framework which can be used in drivers.

As drivers get initialized after bootstrapping the core networking
subsystem, they can make use of ptp_insns wrapped through
ptp_classify_raw(), which allows to simplify and remove PTP classifier
setup code in drivers.

Joint work with Alexei Starovoitov.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Richard Cochran <richard.cochran@omicron.at>
Cc: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c | 11 +----------
 drivers/net/ethernet/ti/cpts.c                       | 10 +---------
 drivers/net/ethernet/xscale/ixp4xx_eth.c             | 11 +----------
 3 files changed, 3 insertions(+), 29 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
index 464e91058c81..73e66838cfef 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
@@ -120,10 +120,6 @@ static void pch_gbe_mdio_write(struct net_device *netdev, int addr, int reg,
 			       int data);
 static void pch_gbe_set_multi(struct net_device *netdev);
 
-static struct sock_filter ptp_filter[] = {
-	PTP_FILTER
-};
-
 static int pch_ptp_match(struct sk_buff *skb, u16 uid_hi, u32 uid_lo, u16 seqid)
 {
 	u8 *data = skb->data;
@@ -131,7 +127,7 @@ static int pch_ptp_match(struct sk_buff *skb, u16 uid_hi, u32 uid_lo, u16 seqid)
 	u16 *hi, *id;
 	u32 lo;
 
-	if (sk_run_filter(skb, ptp_filter) == PTP_CLASS_NONE)
+	if (ptp_classify_raw(skb) == PTP_CLASS_NONE)
 		return 0;
 
 	offset = ETH_HLEN + IPV4_HLEN(data) + UDP_HLEN;
@@ -2635,11 +2631,6 @@ static int pch_gbe_probe(struct pci_dev *pdev,
 
 	adapter->ptp_pdev = pci_get_bus_and_slot(adapter->pdev->bus->number,
 					       PCI_DEVFN(12, 4));
-	if (ptp_filter_init(ptp_filter, ARRAY_SIZE(ptp_filter))) {
-		dev_err(&pdev->dev, "Bad ptp filter\n");
-		ret = -EINVAL;
-		goto err_free_netdev;
-	}
 
 	netdev->netdev_ops = &pch_gbe_netdev_ops;
 	netdev->watchdog_timeo = PCH_GBE_WATCHDOG_PERIOD;
diff --git a/drivers/net/ethernet/ti/cpts.c b/drivers/net/ethernet/ti/cpts.c
index 372cb192c5aa..a3bbf59eaafd 100644
--- a/drivers/net/ethernet/ti/cpts.c
+++ b/drivers/net/ethernet/ti/cpts.c
@@ -31,10 +31,6 @@
 
 #ifdef CONFIG_TI_CPTS
 
-static struct sock_filter ptp_filter[] = {
-	PTP_FILTER
-};
-
 #define cpts_read32(c, r)	__raw_readl(&c->reg->r)
 #define cpts_write32(c, v, r)	__raw_writel(v, &c->reg->r)
 
@@ -301,7 +297,7 @@ static u64 cpts_find_ts(struct cpts *cpts, struct sk_buff *skb, int ev_type)
 	u64 ns = 0;
 	struct cpts_event *event;
 	struct list_head *this, *next;
-	unsigned int class = sk_run_filter(skb, ptp_filter);
+	unsigned int class = ptp_classify_raw(skb);
 	unsigned long flags;
 	u16 seqid;
 	u8 mtype;
@@ -372,10 +368,6 @@ int cpts_register(struct device *dev, struct cpts *cpts,
 	int err, i;
 	unsigned long flags;
 
-	if (ptp_filter_init(ptp_filter, ARRAY_SIZE(ptp_filter))) {
-		pr_err("cpts: bad ptp filter\n");
-		return -EINVAL;
-	}
 	cpts->info = cpts_info;
 	cpts->clock = ptp_clock_register(&cpts->info, dev);
 	if (IS_ERR(cpts->clock)) {
diff --git a/drivers/net/ethernet/xscale/ixp4xx_eth.c b/drivers/net/ethernet/xscale/ixp4xx_eth.c
index 25283f17d82f..f7e0f0f7c2e2 100644
--- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
+++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
@@ -256,10 +256,6 @@ static int ports_open;
 static struct port *npe_port_tab[MAX_NPES];
 static struct dma_pool *dma_pool;
 
-static struct sock_filter ptp_filter[] = {
-	PTP_FILTER
-};
-
 static int ixp_ptp_match(struct sk_buff *skb, u16 uid_hi, u32 uid_lo, u16 seqid)
 {
 	u8 *data = skb->data;
@@ -267,7 +263,7 @@ static int ixp_ptp_match(struct sk_buff *skb, u16 uid_hi, u32 uid_lo, u16 seqid)
 	u16 *hi, *id;
 	u32 lo;
 
-	if (sk_run_filter(skb, ptp_filter) != PTP_CLASS_V1_IPV4)
+	if (ptp_classify_raw(skb) != PTP_CLASS_V1_IPV4)
 		return 0;
 
 	offset = ETH_HLEN + IPV4_HLEN(data) + UDP_HLEN;
@@ -1413,11 +1409,6 @@ static int eth_init_one(struct platform_device *pdev)
 	char phy_id[MII_BUS_ID_SIZE + 3];
 	int err;
 
-	if (ptp_filter_init(ptp_filter, ARRAY_SIZE(ptp_filter))) {
-		pr_err("ixp4xx_eth: bad ptp filter\n");
-		return -EINVAL;
-	}
-
 	if (!(dev = alloc_etherdev(sizeof(struct port))))
 		return -ENOMEM;
 
-- 
cgit v1.2.2


From 568f194e8bd16c353ad50f9ab95d98b20578a39d Mon Sep 17 00:00:00 2001
From: Daniel Borkmann <dborkman@redhat.com>
Date: Fri, 28 Mar 2014 18:58:23 +0100
Subject: net: ppp: use sk_unattached_filter api

For the ppp driver, there are currently two open-coded BPF filters in use,
that is, pass_filter and active_filter. Migrate both to make proper use
of sk_unattached_filter_{create,destroy} API so that the actual BPF code
is decoupled from direct access, and filters can be jited as a side-effect
by the internal filter compiler.

Joint work with Alexei Starovoitov.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linux-ppp@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ppp/ppp_generic.c | 60 +++++++++++++++++++++++++++++--------------
 1 file changed, 41 insertions(+), 19 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ppp/ppp_generic.c b/drivers/net/ppp/ppp_generic.c
index 72ff14b811c6..e3923ebb693f 100644
--- a/drivers/net/ppp/ppp_generic.c
+++ b/drivers/net/ppp/ppp_generic.c
@@ -143,9 +143,8 @@ struct ppp {
 	struct sk_buff_head mrq;	/* MP: receive reconstruction queue */
 #endif /* CONFIG_PPP_MULTILINK */
 #ifdef CONFIG_PPP_FILTER
-	struct sock_filter *pass_filter;	/* filter for packets to pass */
-	struct sock_filter *active_filter;/* filter for pkts to reset idle */
-	unsigned pass_len, active_len;
+	struct sk_filter *pass_filter;	/* filter for packets to pass */
+	struct sk_filter *active_filter;/* filter for pkts to reset idle */
 #endif /* CONFIG_PPP_FILTER */
 	struct net	*ppp_net;	/* the net we belong to */
 	struct ppp_link_stats stats64;	/* 64 bit network stats */
@@ -755,28 +754,42 @@ static long ppp_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	case PPPIOCSPASS:
 	{
 		struct sock_filter *code;
+
 		err = get_filter(argp, &code);
 		if (err >= 0) {
+			struct sock_fprog fprog = {
+				.len = err,
+				.filter = code,
+			};
+
 			ppp_lock(ppp);
-			kfree(ppp->pass_filter);
-			ppp->pass_filter = code;
-			ppp->pass_len = err;
+			if (ppp->pass_filter)
+				sk_unattached_filter_destroy(ppp->pass_filter);
+			err = sk_unattached_filter_create(&ppp->pass_filter,
+							  &fprog);
+			kfree(code);
 			ppp_unlock(ppp);
-			err = 0;
 		}
 		break;
 	}
 	case PPPIOCSACTIVE:
 	{
 		struct sock_filter *code;
+
 		err = get_filter(argp, &code);
 		if (err >= 0) {
+			struct sock_fprog fprog = {
+				.len = err,
+				.filter = code,
+			};
+
 			ppp_lock(ppp);
-			kfree(ppp->active_filter);
-			ppp->active_filter = code;
-			ppp->active_len = err;
+			if (ppp->active_filter)
+				sk_unattached_filter_destroy(ppp->active_filter);
+			err = sk_unattached_filter_create(&ppp->active_filter,
+							  &fprog);
+			kfree(code);
 			ppp_unlock(ppp);
-			err = 0;
 		}
 		break;
 	}
@@ -1184,7 +1197,7 @@ ppp_send_frame(struct ppp *ppp, struct sk_buff *skb)
 		   a four-byte PPP header on each packet */
 		*skb_push(skb, 2) = 1;
 		if (ppp->pass_filter &&
-		    sk_run_filter(skb, ppp->pass_filter) == 0) {
+		    SK_RUN_FILTER(ppp->pass_filter, skb) == 0) {
 			if (ppp->debug & 1)
 				netdev_printk(KERN_DEBUG, ppp->dev,
 					      "PPP: outbound frame "
@@ -1194,7 +1207,7 @@ ppp_send_frame(struct ppp *ppp, struct sk_buff *skb)
 		}
 		/* if this packet passes the active filter, record the time */
 		if (!(ppp->active_filter &&
-		      sk_run_filter(skb, ppp->active_filter) == 0))
+		      SK_RUN_FILTER(ppp->active_filter, skb) == 0))
 			ppp->last_xmit = jiffies;
 		skb_pull(skb, 2);
 #else
@@ -1818,7 +1831,7 @@ ppp_receive_nonmp_frame(struct ppp *ppp, struct sk_buff *skb)
 
 			*skb_push(skb, 2) = 0;
 			if (ppp->pass_filter &&
-			    sk_run_filter(skb, ppp->pass_filter) == 0) {
+			    SK_RUN_FILTER(ppp->pass_filter, skb) == 0) {
 				if (ppp->debug & 1)
 					netdev_printk(KERN_DEBUG, ppp->dev,
 						      "PPP: inbound frame "
@@ -1827,7 +1840,7 @@ ppp_receive_nonmp_frame(struct ppp *ppp, struct sk_buff *skb)
 				return;
 			}
 			if (!(ppp->active_filter &&
-			      sk_run_filter(skb, ppp->active_filter) == 0))
+			      SK_RUN_FILTER(ppp->active_filter, skb) == 0))
 				ppp->last_recv = jiffies;
 			__skb_pull(skb, 2);
 		} else
@@ -2672,6 +2685,10 @@ ppp_create_interface(struct net *net, int unit, int *retp)
 	ppp->minseq = -1;
 	skb_queue_head_init(&ppp->mrq);
 #endif /* CONFIG_PPP_MULTILINK */
+#ifdef CONFIG_PPP_FILTER
+	ppp->pass_filter = NULL;
+	ppp->active_filter = NULL;
+#endif /* CONFIG_PPP_FILTER */
 
 	/*
 	 * drum roll: don't forget to set
@@ -2802,10 +2819,15 @@ static void ppp_destroy_interface(struct ppp *ppp)
 	skb_queue_purge(&ppp->mrq);
 #endif /* CONFIG_PPP_MULTILINK */
 #ifdef CONFIG_PPP_FILTER
-	kfree(ppp->pass_filter);
-	ppp->pass_filter = NULL;
-	kfree(ppp->active_filter);
-	ppp->active_filter = NULL;
+	if (ppp->pass_filter) {
+		sk_unattached_filter_destroy(ppp->pass_filter);
+		ppp->pass_filter = NULL;
+	}
+
+	if (ppp->active_filter) {
+		sk_unattached_filter_destroy(ppp->active_filter);
+		ppp->active_filter = NULL;
+	}
 #endif /* CONFIG_PPP_FILTER */
 
 	kfree_skb(ppp->xmit_pending);
-- 
cgit v1.2.2


From 1845bd3a91427b4715ff0e28719fa4a4b9003f23 Mon Sep 17 00:00:00 2001
From: Amitkumar Karwar <akarwar@marvell.com>
Date: Thu, 20 Mar 2014 19:50:06 -0700
Subject: mwifiex: scan command preparation failure handling

When scan request is received, scan commands are prepared and
queued into scan pending queue. There is a corner case when
command nodes are full. So we stop queueing further scan
commands and return an error. This patch makes sure that
currently queued commands in scan pending queue are also freed
in this case.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/scan.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/scan.c b/drivers/net/wireless/mwifiex/scan.c
index 4e6e75c2de0c..e496497a7af0 100644
--- a/drivers/net/wireless/mwifiex/scan.c
+++ b/drivers/net/wireless/mwifiex/scan.c
@@ -591,10 +591,12 @@ mwifiex_scan_channel_list(struct mwifiex_private *priv,
 			  *chan_tlv_out,
 			  struct mwifiex_chan_scan_param_set *scan_chan_list)
 {
+	struct mwifiex_adapter *adapter = priv->adapter;
 	int ret = 0;
 	struct mwifiex_chan_scan_param_set *tmp_chan_list;
 	struct mwifiex_chan_scan_param_set *start_chan;
-
+	struct cmd_ctrl_node *cmd_node, *tmp_node;
+	unsigned long flags;
 	u32 tlv_idx, rates_size, cmd_no;
 	u32 total_scan_time;
 	u32 done_early;
@@ -748,8 +750,19 @@ mwifiex_scan_channel_list(struct mwifiex_private *priv,
 		scan_cfg_out->tlv_buf_len -=
 			    sizeof(struct mwifiex_ie_types_header) + rates_size;
 
-		if (ret)
+		if (ret) {
+			spin_lock_irqsave(&adapter->scan_pending_q_lock, flags);
+			list_for_each_entry_safe(cmd_node, tmp_node,
+						 &adapter->scan_pending_q,
+						 list) {
+				list_del(&cmd_node->list);
+				cmd_node->wait_q_enabled = false;
+				mwifiex_insert_cmd_to_free_q(adapter, cmd_node);
+			}
+			spin_unlock_irqrestore(&adapter->scan_pending_q_lock,
+					       flags);
 			break;
+		}
 	}
 
 	if (ret)
-- 
cgit v1.2.2


From 3d026d09b28dda24777129a931634949c75a9181 Mon Sep 17 00:00:00 2001
From: Amitkumar Karwar <akarwar@marvell.com>
Date: Thu, 20 Mar 2014 16:23:49 -0700
Subject: mwifiex: cancel pending commands for signal

When a thread is interrupted by signal, all
wait_event_interruptible calls after queueing commands return
an error. Numbers of commands in pending queue are increased
in this case. Sometimes all commands nodes in pool are filled.

We will cancel pending commands when signal is received.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/sta_ioctl.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c
index 2a9cfd563a07..888f3ae9df83 100644
--- a/drivers/net/wireless/mwifiex/sta_ioctl.c
+++ b/drivers/net/wireless/mwifiex/sta_ioctl.c
@@ -64,6 +64,7 @@ int mwifiex_wait_queue_complete(struct mwifiex_adapter *adapter,
 					  *(cmd_queued->condition));
 	if (status) {
 		dev_err(adapter->dev, "cmd_wait_q terminated: %d\n", status);
+		mwifiex_cancel_all_pending_cmd(adapter);
 		return status;
 	}
 
-- 
cgit v1.2.2


From 52250cbee7f62400140295a632e0ffbbe5b083ca Mon Sep 17 00:00:00 2001
From: Amitkumar Karwar <akarwar@marvell.com>
Date: Thu, 20 Mar 2014 16:23:50 -0700
Subject: mwifiex: use timeout variant for wait_event_interruptible

It has been observed that system hangs during suspend, if host
sleep activation fails due to a missing interrupt from firmware.
Use timeout variant, so that the thread will be woken up when
timer expires.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/sta_ioctl.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c
index 888f3ae9df83..894270611f2c 100644
--- a/drivers/net/wireless/mwifiex/sta_ioctl.c
+++ b/drivers/net/wireless/mwifiex/sta_ioctl.c
@@ -520,8 +520,9 @@ int mwifiex_enable_hs(struct mwifiex_adapter *adapter)
 		return false;
 	}
 
-	if (wait_event_interruptible(adapter->hs_activate_wait_q,
-				     adapter->hs_activate_wait_q_woken)) {
+	if (wait_event_interruptible_timeout(adapter->hs_activate_wait_q,
+					     adapter->hs_activate_wait_q_woken,
+					     (10 * HZ)) <= 0) {
 		dev_err(adapter->dev, "hs_activate_wait_q terminated\n");
 		return false;
 	}
-- 
cgit v1.2.2


From 94010fa0dd07e8b904e7c6b6589f15573008ab15 Mon Sep 17 00:00:00 2001
From: Adam Lee <adam.lee@canonical.com>
Date: Fri, 28 Mar 2014 11:36:18 +0800
Subject: rtlwifi: add MSI interrupts mode support

Add MSI interrupts mode support, enable it when submodules' msi_support
flag is true, also could fallback to pin-based interrupts mode if MSI
interrupts mode fails.

RealTek's policy(on modules which work well with MSI interrupts mode) is:

> If the platform supports both MSI and pin-based, use MSI.
> If the platform supports MSI only, use MSI.
> If the platform supports pin-based only, use pin-based.

Also as RealTek's testing results, RTL8188EE and RTL8723BE work well
with both MSI mode and pin-based mode fallback.

Signed-off-by: Adam Lee <adam.lee@canonical.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtlwifi/pci.c | 65 ++++++++++++++++++++++++++++++++++++--
 1 file changed, 63 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c
index 7d711708d2f3..dae55257f0e8 100644
--- a/drivers/net/wireless/rtlwifi/pci.c
+++ b/drivers/net/wireless/rtlwifi/pci.c
@@ -1853,6 +1853,65 @@ static bool _rtl_pci_find_adapter(struct pci_dev *pdev,
 	return true;
 }
 
+static int rtl_pci_intr_mode_msi(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(pcipriv);
+	int ret;
+
+	ret = pci_enable_msi(rtlpci->pdev);
+	if (ret < 0)
+		return ret;
+
+	ret = request_irq(rtlpci->pdev->irq, &_rtl_pci_interrupt,
+			  IRQF_SHARED, KBUILD_MODNAME, hw);
+	if (ret < 0) {
+		pci_disable_msi(rtlpci->pdev);
+		return ret;
+	}
+
+	rtlpci->using_msi = true;
+
+	RT_TRACE(rtlpriv, COMP_INIT|COMP_INTR, DBG_DMESG,
+		 "MSI Interrupt Mode!\n");
+	return 0;
+}
+
+static int rtl_pci_intr_mode_legacy(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(pcipriv);
+	int ret;
+
+	ret = request_irq(rtlpci->pdev->irq, &_rtl_pci_interrupt,
+			  IRQF_SHARED, KBUILD_MODNAME, hw);
+	if (ret < 0)
+		return ret;
+
+	rtlpci->using_msi = false;
+	RT_TRACE(rtlpriv, COMP_INIT|COMP_INTR, DBG_DMESG,
+		 "Pin-based Interrupt Mode!\n");
+	return 0;
+}
+
+static int rtl_pci_intr_mode_decide(struct ieee80211_hw *hw)
+{
+	struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(pcipriv);
+	int ret;
+
+	if (rtlpci->msi_support) {
+		ret = rtl_pci_intr_mode_msi(hw);
+		if (ret < 0)
+			ret = rtl_pci_intr_mode_legacy(hw);
+	} else {
+		ret = rtl_pci_intr_mode_legacy(hw);
+	}
+	return ret;
+}
+
 int rtl_pci_probe(struct pci_dev *pdev,
 			    const struct pci_device_id *id)
 {
@@ -1995,8 +2054,7 @@ int rtl_pci_probe(struct pci_dev *pdev,
 	}
 
 	rtlpci = rtl_pcidev(pcipriv);
-	err = request_irq(rtlpci->pdev->irq, &_rtl_pci_interrupt,
-			  IRQF_SHARED, KBUILD_MODNAME, hw);
+	err = rtl_pci_intr_mode_decide(hw);
 	if (err) {
 		RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG,
 			 "%s: failed to register IRQ handler\n",
@@ -2064,6 +2122,9 @@ void rtl_pci_disconnect(struct pci_dev *pdev)
 		rtlpci->irq_alloc = 0;
 	}
 
+	if (rtlpci->using_msi)
+		pci_disable_msi(rtlpci->pdev);
+
 	list_del(&rtlpriv->list);
 	if (rtlpriv->io.pci_mem_start != 0) {
 		pci_iounmap(pdev, (void __iomem *)rtlpriv->io.pci_mem_start);
-- 
cgit v1.2.2


From 2a54eb5e1476426ee639bbfbe179b52342a0d82c Mon Sep 17 00:00:00 2001
From: Adam Lee <adam.lee@canonical.com>
Date: Fri, 28 Mar 2014 11:36:19 +0800
Subject: rtlwifi: rtl8188ee: enable MSI interrupts mode

Some HP notebooks using this rtl8188ee hardware module can't get
AP scan results with pin-based interrupts mode, enabling MSI interrupts
mode could fix it.

As RealTek's testing results, RTL8188EE works well with both MSI mode
and pin-based mode fallback.

Signed-off-by: Adam Lee <adam.lee@canonical.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtlwifi/rtl8188ee/sw.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/sw.c b/drivers/net/wireless/rtlwifi/rtl8188ee/sw.c
index 347af1e4f438..1b4101bf9974 100644
--- a/drivers/net/wireless/rtlwifi/rtl8188ee/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8188ee/sw.c
@@ -93,6 +93,7 @@ int rtl88e_init_sw_vars(struct ieee80211_hw *hw)
 	u8 tid;
 
 	rtl8188ee_bt_reg_init(hw);
+	rtlpci->msi_support = true;
 
 	rtlpriv->dm.dm_initialgain_enable = 1;
 	rtlpriv->dm.dm_flag = 0;
-- 
cgit v1.2.2


From aabcaa8b4994b935ae54a902afc7b0c3d89098a6 Mon Sep 17 00:00:00 2001
From: Andrea Merello <andrea.merello@gmail.com>
Date: Fri, 28 Mar 2014 18:12:08 +0100
Subject: rtl8187: fix compile warning

ANAPARAM3 register, defined in the rtl818x common register
struct, is accessed as 16bit by rtl8187se and as 8bit by rtl8187b.
Since I have no documentation about this, I can only stick to
the reference code and to what is known to work.

This issue has been addressed by a patch from Larry Finger
that introduces an "union", in the register struct.
In my last patch-set I applied it on the register struct, but
I forget to update rtl8187 driver too.
This patch does it.

Suggested-by: Larry Finger <Larry.Finger@lwfinger.net> [ Original patch ]
Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl8187/dev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtl818x/rtl8187/dev.c b/drivers/net/wireless/rtl818x/rtl8187/dev.c
index c981bcfb6cef..2c79bcc6ae65 100644
--- a/drivers/net/wireless/rtl818x/rtl8187/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8187/dev.c
@@ -592,7 +592,7 @@ static void rtl8187_set_anaparam(struct rtl8187_priv *priv, bool rfon)
 	rtl818x_iowrite32(priv, &priv->map->ANAPARAM, anaparam);
 	rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, anaparam2);
 	if (priv->is_rtl8187b)
-		rtl818x_iowrite8(priv, &priv->map->ANAPARAM3, anaparam3);
+		rtl818x_iowrite8(priv, &priv->map->ANAPARAM3A, anaparam3);
 	reg &= ~RTL818X_CONFIG3_ANAPARAM_WRITE;
 	rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg);
 	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
-- 
cgit v1.2.2


From a7488c792f007377971a87aa42f91741f3fbd47f Mon Sep 17 00:00:00 2001
From: Amitkumar Karwar <akarwar@marvell.com>
Date: Thu, 27 Mar 2014 21:05:26 -0700
Subject: mwifiex: fix spinlock bad magic bug

[ 6630.450908] BUG: spinlock bad magic on CPU#1,
               ksdioirqd/mmc1/355
[ 6630.450914] Unable to handle kernel NULL pointer dereference
               at virtual address 0000004f
[ 6630.450919] pgd = ecbd8000
[ 6630.450926] [0000004f] *pgd=00000000
[ 6630.450936]  lock: 0xeea4ab08, .magic: 00000000,
               .owner: <none>/-1, .owner_cpu: 0
[ 6630.450939] Backtrace:
[ 6630.450956] [<c010d354>] (unwind_backtrace+0x0/0x118) from
               [<c060c238>] (dump_stack+0x28/0x30)
[ 6630.450960] Internal error: Oops: 5 [#1] SMP ARM
[ 6630.450964] Modules linked in: uvcvideo videobuf2_vmalloc
[ 6630.450980] [<c060c238>] (dump_stack+0x28/0x30) from
               [<c0315ab4>] (spin_dump+0x80/0x94)
[ 6630.450988] [<c0315ab4>] (spin_dump+0x80/0x94) from
               [<c0315af4>] (spin_bug+0x2c/0x30)
[ 6630.450996] [<c0315af4>] (spin_bug+0x2c/0x30) from
               [<c0315b80>] (do_raw_spin_lock+0x28/0x15c)
[ 6630.451004] [<c0315b80>] (do_raw_spin_lock+0x28/0x15c) from
               [<c0610c24>] (_raw_spin_lock_irqsave+0x20/0x28)
[ 6630.451016] [<c0610c24>] (_raw_spin_lock_irqsave+0x20/0x28)
               from [<bf07a7f4>] (mwifiex_exec_next_cmd
                                  +0x6c/0x45c [mwifiex])
[ 6630.451030] [<bf07a7f4>] (mwifiex_exec_next_cmd+0x6c/0x45c
               [mwifiex]) from [<bf07834c>]
               (mwifiex_main_process+0x2c8/0x464 [mwifiex])
[ 6630.451047] [<bf07834c>] (mwifiex_main_process+0x2c8/0x464
               [mwifiex]) from [<bf0a093c>]
               (mwifiex_sdio_interrupt+0xc8/0x1cc [mwifiex_sdio]
[ 6630.451064] [<bf0a093c>] (mwifiex_sdio_interrupt+0xc8/0x1cc
               [mwifiex_sdio]) from [<c04bbde0>]
               (sdio_irq_thread+0x178/0x31c)
[ 6630.451079] [<c04bbde0>] (sdio_irq_thread+0x178/0x31c) from
               [<c0145514>] (kthread+0xc8/0xd8)
[ 6630.451095] [<c0145514>] (kthread+0xc8/0xd8) from
               [<c0106118>] (ret_from_fork+0x14/0x20)

This bug has introduced/exposed due to recent patch in which we
cancel pending commands before suspend (using hs_enabling flag).
The NULL pointer is dereferenced when both
mwifiex_cancel_all_pending_cmd() and mwifiex_exec_next_cmd()
try to access cmd pending queue simultaneously.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/cmdevt.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c
index a23791d49955..1062c918a7bf 100644
--- a/drivers/net/wireless/mwifiex/cmdevt.c
+++ b/drivers/net/wireless/mwifiex/cmdevt.c
@@ -981,11 +981,10 @@ mwifiex_cancel_all_pending_cmd(struct mwifiex_adapter *adapter)
 	struct mwifiex_private *priv;
 	int i;
 
+	spin_lock_irqsave(&adapter->mwifiex_cmd_lock, cmd_flags);
 	/* Cancel current cmd */
 	if ((adapter->curr_cmd) && (adapter->curr_cmd->wait_q_enabled)) {
-		spin_lock_irqsave(&adapter->mwifiex_cmd_lock, flags);
 		adapter->curr_cmd->wait_q_enabled = false;
-		spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, flags);
 		adapter->cmd_wait_q.status = -1;
 		mwifiex_complete_cmd(adapter, adapter->curr_cmd);
 	}
@@ -1005,6 +1004,7 @@ mwifiex_cancel_all_pending_cmd(struct mwifiex_adapter *adapter)
 		spin_lock_irqsave(&adapter->cmd_pending_q_lock, flags);
 	}
 	spin_unlock_irqrestore(&adapter->cmd_pending_q_lock, flags);
+	spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, cmd_flags);
 
 	/* Cancel all pending scan command */
 	spin_lock_irqsave(&adapter->scan_pending_q_lock, flags);
-- 
cgit v1.2.2


From 3f3aa2fb48bd637002c5742c6d1cd4dfa931b771 Mon Sep 17 00:00:00 2001
From: Dan Carpenter <dan.carpenter@oracle.com>
Date: Fri, 28 Mar 2014 11:27:33 +0300
Subject: rsi: rsi_91x: misleading debug printk

There is a missing set of curly braces here so the debug output says
"Probe confirm received" unintentionally.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rsi/rsi_91x_mgmt.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rsi/rsi_91x_mgmt.c b/drivers/net/wireless/rsi/rsi_91x_mgmt.c
index ef37d4b27bd4..2361a6849ad7 100644
--- a/drivers/net/wireless/rsi/rsi_91x_mgmt.c
+++ b/drivers/net/wireless/rsi/rsi_91x_mgmt.c
@@ -1292,10 +1292,11 @@ int rsi_mgmt_pkt_recv(struct rsi_common *common, u8 *msg)
 			return -EINVAL;
 		}
 	} else if (msg_type == TX_STATUS_IND) {
-		if (msg[15] == PROBEREQ_CONFIRM)
+		if (msg[15] == PROBEREQ_CONFIRM) {
 			common->mgmt_q_block = false;
 			rsi_dbg(FSM_ZONE, "%s: Probe confirm received\n",
 				__func__);
+		}
 	} else {
 		return rsi_mgmt_pkt_to_core(common, msg, msg_len, msg_type);
 	}
-- 
cgit v1.2.2


From 6cea5f2173440d324b0172373a95408323f28911 Mon Sep 17 00:00:00 2001
From: Andrea Merello <andrea.merello@gmail.com>
Date: Fri, 28 Mar 2014 18:14:28 +0100
Subject: rtl8180: don't use weird trick to access "far" registers

In rtl8180/rtl8185/rtl8187se the register space is represented
using packed structure type. Register are thus accessed using a
pointer of this type.
All registers are packed toghether, and only small gaps are present.

However Rtl8187se has also some "sparse" registers, very far from
the "main register block".

It could be possible to access them by simply declare huge reserved
blocks inside the register struct (and this causes NO memory waste).
However, for various reasons, access to those "far" registers is
done with special dedicated macros, without declaring them in the
register struct.

This is done in an intricate manner, that makes code less readable
and caused static analisys tool to produce warnings.

This patch keeps the "macro" mechanism, but it changes its
implementation in a simplier and more straightforward way.

Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl818x.h | 14 ++++----------
 1 file changed, 4 insertions(+), 10 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtl818x/rtl818x.h b/drivers/net/wireless/rtl818x/rtl818x.h
index 99dbc123b753..45ea4e1c4abe 100644
--- a/drivers/net/wireless/rtl818x/rtl818x.h
+++ b/drivers/net/wireless/rtl818x/rtl818x.h
@@ -17,13 +17,7 @@
 
 struct rtl818x_csr {
 
-	union {
-		u8	MAC[6];
-		u8	offset1[6];     /* upper page indexing helpers */
-		__le16	offset2[1];
-		__le32	offset4[1];
-	} __packed;
-
+	u8	MAC[6];
 	u8	reserved_0[2];
 
 	union {
@@ -340,9 +334,9 @@ struct rtl818x_csr {
  * I don't like to introduce a ton of "reserved"..
  * They are for RTL8187SE
  */
-#define REG_ADDR1(addr)	((u8 __iomem *)(&priv->map->offset1[(addr)]))
-#define REG_ADDR2(addr)	((__le16 __iomem *)(&priv->map->offset2[((addr) >> 1)]))
-#define REG_ADDR4(addr)	((__le32 __iomem *)(&priv->map->offset4[((addr) >> 2)]))
+#define REG_ADDR1(addr)	((u8 __iomem *)priv->map + addr)
+#define REG_ADDR2(addr)	((__le16 __iomem *)priv->map + (addr >> 1))
+#define REG_ADDR4(addr)	((__le32 __iomem *)priv->map + (addr >> 2))
 
 #define FEMR_SE		REG_ADDR2(0x1D4)
 #define ARFR		REG_ADDR2(0x1E0)
-- 
cgit v1.2.2


From a31267c30880ebdc73e6815f58c69a665052fab8 Mon Sep 17 00:00:00 2001
From: Alexey Khoroshilov <khoroshilov@ispras.ru>
Date: Sat, 29 Mar 2014 00:26:15 +0400
Subject: rtl8187: fix use after free on failure path in rtl8187_probe()

If allocation of io_dmabuf fails, rtl8187_probe() calls usb_put_dev(udev)
while usb_get_dev(udev) is not called yet. As a result refcnt is decremented
incorrectly and usb_dev can be used after memory deallocation.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl8187/dev.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtl818x/rtl8187/dev.c b/drivers/net/wireless/rtl818x/rtl8187/dev.c
index 2c79bcc6ae65..0ca17cda48fa 100644
--- a/drivers/net/wireless/rtl818x/rtl8187/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8187/dev.c
@@ -1636,10 +1636,10 @@ static int rtl8187_probe(struct usb_interface *intf,
 
  err_free_dmabuf:
 	kfree(priv->io_dmabuf);
- err_free_dev:
-	ieee80211_free_hw(dev);
 	usb_set_intfdata(intf, NULL);
 	usb_put_dev(udev);
+ err_free_dev:
+	ieee80211_free_hw(dev);
 	return err;
 }
 
-- 
cgit v1.2.2


From 7b5939ba591e9affbe4f336935b0985fd250a2b3 Mon Sep 17 00:00:00 2001
From: Yegor Yefremov <yegorslists@googlemail.com>
Date: Fri, 28 Mar 2014 12:07:18 +0100
Subject: qmi_wwan/cdc_ether: move Novatel E371 (1410:9011) to qmi_wwan

This device provides QMI and ethernet functionality via a standard CDC
ethernet descriptor.  But when driven by cdc_ether, the QMI
functionality is unavailable because only cdc_ether can claim the USB
interface. Thus blacklist the device in cdc_ether and add its IDs to
qmi_wwan, which enables both QMI and ethernet simultaneously.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/cdc_ether.c | 7 +++++++
 drivers/net/usb/qmi_wwan.c  | 7 +++++++
 2 files changed, 14 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c
index bd363b27e854..9ea4bfe5d318 100644
--- a/drivers/net/usb/cdc_ether.c
+++ b/drivers/net/usb/cdc_ether.c
@@ -625,6 +625,13 @@ static const struct usb_device_id	products[] = {
 	.driver_info = 0,
 },
 
+/* Novatel Expedite E371 - handled by qmi_wwan */
+{
+	USB_DEVICE_AND_INTERFACE_INFO(NOVATEL_VENDOR_ID, 0x9011, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+	.driver_info = 0,
+},
+
 /* AnyDATA ADU960S - handled by qmi_wwan */
 {
 	USB_DEVICE_AND_INTERFACE_INFO(0x16d5, 0x650a, USB_CLASS_COMM,
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index 313cb6cd4848..e3458e3c44f1 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -500,6 +500,13 @@ static const struct usb_device_id products[] = {
 		                              USB_CDC_PROTO_NONE),
 		.driver_info        = (unsigned long)&qmi_wwan_info,
 	},
+	{	/* Novatel Expedite E371 */
+		USB_DEVICE_AND_INTERFACE_INFO(0x1410, 0x9011,
+		                              USB_CLASS_COMM,
+		                              USB_CDC_SUBCLASS_ETHERNET,
+		                              USB_CDC_PROTO_NONE),
+		.driver_info        = (unsigned long)&qmi_wwan_info,
+	},
 	{	/* Dell Wireless 5800 (Novatel E362) */
 		USB_DEVICE_AND_INTERFACE_INFO(0x413C, 0x8195,
 					      USB_CLASS_COMM,
-- 
cgit v1.2.2


From 44934fac2171d5b0ed1838293f2e2db7508ad628 Mon Sep 17 00:00:00 2001
From: Lucas Stach <l.stach@pengutronix.de>
Date: Sun, 30 Mar 2014 21:32:08 +0200
Subject: net: fec: make sure to init MAC address

Though we made sure to acquire a valid MAC for
the netdevice we never actually programmed it
into the hardware.
So if the bootloader did not set the MAC,
network operation would only work if userspace
explicitly asked to transfer the MAC to hardware.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/freescale/fec_main.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index e19315eaf2dd..8d69e439f0c5 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -1898,10 +1898,11 @@ fec_set_mac_address(struct net_device *ndev, void *p)
 	struct fec_enet_private *fep = netdev_priv(ndev);
 	struct sockaddr *addr = p;
 
-	if (!is_valid_ether_addr(addr->sa_data))
-		return -EADDRNOTAVAIL;
-
-	memcpy(ndev->dev_addr, addr->sa_data, ndev->addr_len);
+	if (addr) {
+		if (!is_valid_ether_addr(addr->sa_data))
+			return -EADDRNOTAVAIL;
+		memcpy(ndev->dev_addr, addr->sa_data, ndev->addr_len);
+	}
 
 	writel(ndev->dev_addr[3] | (ndev->dev_addr[2] << 8) |
 		(ndev->dev_addr[1] << 16) | (ndev->dev_addr[0] << 24),
@@ -2000,6 +2001,8 @@ static int fec_enet_init(struct net_device *ndev)
 
 	/* Get the Ethernet address */
 	fec_get_mac(ndev);
+	/* make sure MAC we just acquired is programmed into the hw */
+	fec_set_mac_address(ndev, NULL);
 
 	/* init the tx & rx ring size */
 	fep->tx_ring_size = TX_RING_SIZE;
-- 
cgit v1.2.2


From 17e84a9253467552fb06f99c009bb0bc1d7bfd39 Mon Sep 17 00:00:00 2001
From: Alexander Aring <alex.aring@gmail.com>
Date: Mon, 31 Mar 2014 03:26:51 +0200
Subject: at86rf230: mask irq's before deregister device

While transmit over a at86rf231 device and unloading the module I got:

[   29.643073] WARNING: CPU: 0 PID: 3 at kernel/workqueue.c:1335 __queue_work+0xb4/0x224()
[   29.651457] Modules linked in: at86rf230(-) autofs4
[   29.656612] CPU: 0 PID: 3 Comm: ksoftirqd/0 Tainted: G        W    3.14.0-rc6-01602-g902659e-dirty #294
[   29.666490] [<c00124f0>] (unwind_backtrace) from [<c0010ad0>] (show_stack+0x10/0x14)
[   29.674628] [<c0010ad0>] (show_stack) from [<c0032c80>] (warn_slowpath_common+0x60/0x80)
[   29.683116] [<c0032c80>] (warn_slowpath_common) from [<c0032d30>] (warn_slowpath_null+0x18/0x20)
[   29.692329] [<c0032d30>] (warn_slowpath_null) from [<c0045b08>] (__queue_work+0xb4/0x224)
[   29.700906] [<c0045b08>] (__queue_work) from [<c0045cc8>] (queue_work_on+0x50/0x78)
[   29.708944] [<c0045cc8>] (queue_work_on) from [<c05669cc>] (mac802154_tx+0x1e4/0x240)
[   29.717164] [<c05669cc>] (mac802154_tx) from [<c0471814>] (dev_hard_start_xmit+0x2f0/0x43c)
[   29.725926] [<c0471814>] (dev_hard_start_xmit) from [<c04878d0>] (sch_direct_xmit+0x64/0x2a0)
[   29.734867] [<c04878d0>] (sch_direct_xmit) from [<c0487c38>] (__qdisc_run+0x12c/0x18c)
[   29.743169] [<c0487c38>] (__qdisc_run) from [<c046e1b0>] (net_tx_action+0xe0/0x178)
[   29.751205] [<c046e1b0>] (net_tx_action) from [<c0036690>] (__do_softirq+0x100/0x264)
[   29.759420] [<c0036690>] (__do_softirq) from [<c0036818>] (run_ksoftirqd+0x24/0x4c)
[   29.767453] [<c0036818>] (run_ksoftirqd) from [<c005232c>] (smpboot_thread_fn+0x128/0x13c)
[   29.776121] [<c005232c>] (smpboot_thread_fn) from [<c004c3fc>] (kthread+0xd0/0xe4)
[   29.784061] [<c004c3fc>] (kthread) from [<c000da88>] (ret_from_fork+0x14/0x2c)
[   29.791628] ---[ end trace 3406ff24bd973834 ]---

The problem is there are still interrupts after deregister ieee802154
device. This patch mask all interrupts in the at86rf2xx chips before
deregister the device.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ieee802154/at86rf230.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index a30258aad139..fbb83d175da3 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -997,6 +997,8 @@ static int at86rf230_remove(struct spi_device *spi)
 {
 	struct at86rf230_local *lp = spi_get_drvdata(spi);
 
+	/* mask all at86rf230 irq's */
+	at86rf230_write_subreg(lp, SR_IRQ_MASK, 0);
 	ieee802154_unregister_device(lp->dev);
 
 	free_irq(spi->irq, lp);
-- 
cgit v1.2.2


From b20a774495671f037e7160ea2ce8789af6b61533 Mon Sep 17 00:00:00 2001
From: David Ertman <davidx.m.ertman@intel.com>
Date: Tue, 25 Mar 2014 04:27:55 +0000
Subject: e1000e: Fix no connectivity when driver loaded with cable out

In commit da1e2046e5, the flow for enabling/disabling an Si errata
workaround (e1000_lv_jumbo_workaround_ich8lan) was changed to fix a problem
with iAMT connections dropping on interface down with jumbo frames set.
Part of this change was to move the function call disabling the workaround
to e1000e_down() from the e1000_setup_rctl() function.  The mechanic for
disabling of this workaround involves writing several MAC and PHY registers
back to hardware defaults.

After this commit, when the driver is loaded with the cable out, the PHY
registers are not programmed with the correct default values.  This causes
the device to be capable of transmitting packets, but is unable to recieve
them until this workaround is called.

The flow of e1000e's open code relies upon calling the above workaround to
expicitly program these registers either with jumbo frame appropriate settings
or h/w defaults on 82579 and newer hardware.

Fix this issue by adding logic to e1000_setup_rctl() that not only calls
e1000_lv_jumbo_workaround_ich8lan() when jumbo frames are set, to enable the
workaround, but also calls this function to explicitly disable the workaround
in the case that jumbo frames are not set.

Signed-off-by: Dave Ertman <davidx.m.ertman@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/e1000e/netdev.c | 20 +++++++++++++++-----
 1 file changed, 15 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index f1cce5928e20..dce377b59b2c 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -2991,11 +2991,21 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)
 	u32 rctl, rfctl;
 	u32 pages = 0;
 
-	/* Workaround Si errata on PCHx - configure jumbo frame flow */
-	if ((hw->mac.type >= e1000_pch2lan) &&
-	    (adapter->netdev->mtu > ETH_DATA_LEN) &&
-	    e1000_lv_jumbo_workaround_ich8lan(hw, true))
-		e_dbg("failed to enable jumbo frame workaround mode\n");
+	/* Workaround Si errata on PCHx - configure jumbo frame flow.
+	 * If jumbo frames not set, program related MAC/PHY registers
+	 * to h/w defaults
+	 */
+	if (hw->mac.type >= e1000_pch2lan) {
+		s32 ret_val;
+
+		if (adapter->netdev->mtu > ETH_DATA_LEN)
+			ret_val = e1000_lv_jumbo_workaround_ich8lan(hw, true);
+		else
+			ret_val = e1000_lv_jumbo_workaround_ich8lan(hw, false);
+
+		if (ret_val)
+			e_dbg("failed to enable|disable jumbo frame workaround mode\n");
+	}
 
 	/* Program MC offset vector base */
 	rctl = er32(RCTL);
-- 
cgit v1.2.2


From 181e7d5d7bd7747e882e3ca89ecbf0fc3e72d0da Mon Sep 17 00:00:00 2001
From: Jakub Kicinski <kubakici@wp.pl>
Date: Sat, 15 Mar 2014 14:55:11 +0000
Subject: ixgbe: remove redundant if clause from PTP work

ptp_tx_skb is always set before work is scheduled,
work is cancelled before ptp_tx_skb is set to NULL.
PTP work cannot ever see ptp_tx_skb set to NULL.

Signed-off-by: Jakub Kicinski <kubakici@wp.pl>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c | 4 ----
 1 file changed, 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c
index 44ac9aef6a8d..8b527d79d429 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c
@@ -512,10 +512,6 @@ static void ixgbe_ptp_tx_hwtstamp_work(struct work_struct *work)
 					      IXGBE_PTP_TX_TIMEOUT);
 	u32 tsynctxctl;
 
-	/* we have to have a valid skb */
-	if (!adapter->ptp_tx_skb)
-		return;
-
 	if (timeout) {
 		dev_kfree_skb_any(adapter->ptp_tx_skb);
 		adapter->ptp_tx_skb = NULL;
-- 
cgit v1.2.2


From ff29a86ec9143ff1aa1901ae60f06f4980981df4 Mon Sep 17 00:00:00 2001
From: Jakub Kicinski <kubakici@wp.pl>
Date: Sat, 15 Mar 2014 14:55:16 +0000
Subject: ixgbe: never generate both software and hardware timestamps

skb_tx_timestamp() does not report software time stamp
if SKBTX_IN_PROGRESS is set. According to timestamping.txt
software time stamps are a fallback and should not be
generated if hardware time stamp is provided.

Move call to skb_tx_timestamp() after setting
SKBTX_IN_PROGRESS.

Signed-off-by: Jakub Kicinski <kubakici@wp.pl>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 9e5a36612432..24538cb0f856 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -7042,8 +7042,6 @@ netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb,
 		tx_flags |= IXGBE_TX_FLAGS_SW_VLAN;
 	}
 
-	skb_tx_timestamp(skb);
-
 	if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)) {
 		skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
 		tx_flags |= IXGBE_TX_FLAGS_TSTAMP;
@@ -7054,6 +7052,8 @@ netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb,
 		schedule_work(&adapter->ptp_tx_work);
 	}
 
+	skb_tx_timestamp(skb);
+
 #ifdef CONFIG_PCI_IOV
 	/*
 	 * Use the l2switch_enable flag - would be false if the DMA
-- 
cgit v1.2.2


From 151b260c624d47b2c78b2f887e4f791c09c73c17 Mon Sep 17 00:00:00 2001
From: Jakub Kicinski <kubakici@wp.pl>
Date: Sat, 15 Mar 2014 14:55:21 +0000
Subject: ixgbe: fix race conditions on queuing skb for HW time stamp

ixgbe has a single set of TX time stamping resources per NIC.
Use a simple bit lock to avoid race conditions and leaking skbs
when multiple TX rings try to claim time stamping.

Signed-off-by: Jakub Kicinski <kubakici@wp.pl>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe.h      | 1 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 4 +++-
 drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c  | 3 +++
 3 files changed, 7 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
index 2fff0fc4e6e8..26d27aae9793 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
@@ -812,6 +812,7 @@ enum ixgbe_state_t {
 	__IXGBE_SERVICE_SCHED,
 	__IXGBE_IN_SFP_INIT,
 	__IXGBE_PTP_RUNNING,
+	__IXGBE_PTP_TX_IN_PROGRESS,
 };
 
 struct ixgbe_cb {
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 24538cb0f856..c4b930c0ce7f 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -7042,7 +7042,9 @@ netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb,
 		tx_flags |= IXGBE_TX_FLAGS_SW_VLAN;
 	}
 
-	if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)) {
+	if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP &&
+		     !test_and_set_bit_lock(__IXGBE_PTP_TX_IN_PROGRESS,
+					    &adapter->state))) {
 		skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
 		tx_flags |= IXGBE_TX_FLAGS_TSTAMP;
 
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c
index 8b527d79d429..63515a6f67fa 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c
@@ -493,6 +493,7 @@ static void ixgbe_ptp_tx_hwtstamp(struct ixgbe_adapter *adapter)
 
 	dev_kfree_skb_any(adapter->ptp_tx_skb);
 	adapter->ptp_tx_skb = NULL;
+	clear_bit_unlock(__IXGBE_PTP_TX_IN_PROGRESS, &adapter->state);
 }
 
 /**
@@ -515,6 +516,7 @@ static void ixgbe_ptp_tx_hwtstamp_work(struct work_struct *work)
 	if (timeout) {
 		dev_kfree_skb_any(adapter->ptp_tx_skb);
 		adapter->ptp_tx_skb = NULL;
+		clear_bit_unlock(__IXGBE_PTP_TX_IN_PROGRESS, &adapter->state);
 		e_warn(drv, "clearing Tx Timestamp hang");
 		return;
 	}
@@ -925,6 +927,7 @@ void ixgbe_ptp_stop(struct ixgbe_adapter *adapter)
 	if (adapter->ptp_tx_skb) {
 		dev_kfree_skb_any(adapter->ptp_tx_skb);
 		adapter->ptp_tx_skb = NULL;
+		clear_bit_unlock(__IXGBE_PTP_TX_IN_PROGRESS, &adapter->state);
 	}
 
 	if (adapter->ptp_clock) {
-- 
cgit v1.2.2


From 6425f0f353b91c2edad65a7e7d1362d1787d26fd Mon Sep 17 00:00:00 2001
From: Jean Sacren <sakiwit@gmail.com>
Date: Tue, 11 Mar 2014 05:57:56 +0000
Subject: ixgbe: fix ixgbe_check_reset_blocked() declaration

The commit c97506ab0e22 ("ixgbe: Add check for FW veto bit")
introduced the new function ixgbe_check_reset_blocked() with a minor
issue in declaration. Fix the declaration by changing the type
specifier to bool as the definition returns a boolean value.
Additionally all ixgbe_check_reset_blocked() callers are expected to
return a boolean value.

Signed-off-by: Jean Sacren <sakiwit@gmail.com>
Acked-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c | 2 +-
 drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
index ad51c12cb26a..23f765263f12 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
@@ -107,7 +107,7 @@ s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw)
  * have this bit just return false since the link can not be blocked
  * via this method.
  **/
-s32 ixgbe_check_reset_blocked(struct ixgbe_hw *hw)
+bool ixgbe_check_reset_blocked(struct ixgbe_hw *hw)
 {
 	u32 mmngc;
 
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
index 4a456c974ef2..0bb047f751c2 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
@@ -128,7 +128,7 @@ s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw,
 s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw,
                                                ixgbe_link_speed *speed,
                                                bool *autoneg);
-s32 ixgbe_check_reset_blocked(struct ixgbe_hw *hw);
+bool ixgbe_check_reset_blocked(struct ixgbe_hw *hw);
 
 /* PHY specific */
 s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw,
-- 
cgit v1.2.2


From 32c74949b4e37f80ab74d9b497ffb3749cfcb85a Mon Sep 17 00:00:00 2001
From: Mark Rustad <mark.d.rustad@intel.com>
Date: Tue, 18 Mar 2014 07:03:35 +0000
Subject: ixgbevf: Change ixgbe_read_reg to ixgbevf_read_reg

Change the ixgbe_read_reg function name to ixgbevf_read_reg to
avoid a namespace clash with the ixgbe driver. This will allow
ixgbe to take its register read function out-of-line to reduce
memory footprint.

Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbevf/ethtool.c      | 8 ++++----
 drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 4 ++--
 drivers/net/ethernet/intel/ixgbevf/vf.h           | 6 +++---
 3 files changed, 9 insertions(+), 9 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgbevf/ethtool.c b/drivers/net/ethernet/intel/ixgbevf/ethtool.c
index b2d002394e5d..1baecb60f065 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ethtool.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ethtool.c
@@ -540,10 +540,10 @@ static bool reg_pattern_test(struct ixgbevf_adapter *adapter, u64 *data,
 		return true;
 	}
 	for (pat = 0; pat < ARRAY_SIZE(register_test_patterns); pat++) {
-		before = ixgbe_read_reg(&adapter->hw, reg);
+		before = ixgbevf_read_reg(&adapter->hw, reg);
 		ixgbe_write_reg(&adapter->hw, reg,
 				register_test_patterns[pat] & write);
-		val = ixgbe_read_reg(&adapter->hw, reg);
+		val = ixgbevf_read_reg(&adapter->hw, reg);
 		if (val != (register_test_patterns[pat] & write & mask)) {
 			hw_dbg(&adapter->hw,
 			       "pattern test reg %04X failed: got 0x%08X expected 0x%08X\n",
@@ -567,9 +567,9 @@ static bool reg_set_and_check(struct ixgbevf_adapter *adapter, u64 *data,
 		*data = 1;
 		return true;
 	}
-	before = ixgbe_read_reg(&adapter->hw, reg);
+	before = ixgbevf_read_reg(&adapter->hw, reg);
 	ixgbe_write_reg(&adapter->hw, reg, write & mask);
-	val = ixgbe_read_reg(&adapter->hw, reg);
+	val = ixgbevf_read_reg(&adapter->hw, reg);
 	if ((write & mask) != (val & mask)) {
 		pr_err("set/check reg %04X test failed: got 0x%08X expected 0x%08X\n",
 		       reg, (val & mask), write & mask);
diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
index a50e892a5d21..5d9375981713 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
@@ -124,12 +124,12 @@ static void ixgbevf_check_remove(struct ixgbe_hw *hw, u32 reg)
 		ixgbevf_remove_adapter(hw);
 		return;
 	}
-	value = ixgbe_read_reg(hw, IXGBE_VFSTATUS);
+	value = ixgbevf_read_reg(hw, IXGBE_VFSTATUS);
 	if (value == IXGBE_FAILED_READ_REG)
 		ixgbevf_remove_adapter(hw);
 }
 
-u32 ixgbe_read_reg(struct ixgbe_hw *hw, u32 reg)
+u32 ixgbevf_read_reg(struct ixgbe_hw *hw, u32 reg)
 {
 	u8 __iomem *reg_addr = ACCESS_ONCE(hw->hw_addr);
 	u32 value;
diff --git a/drivers/net/ethernet/intel/ixgbevf/vf.h b/drivers/net/ethernet/intel/ixgbevf/vf.h
index 096d33a59def..3061d1890471 100644
--- a/drivers/net/ethernet/intel/ixgbevf/vf.h
+++ b/drivers/net/ethernet/intel/ixgbevf/vf.h
@@ -186,8 +186,8 @@ static inline void ixgbe_write_reg(struct ixgbe_hw *hw, u32 reg, u32 value)
 }
 #define IXGBE_WRITE_REG(h, r, v) ixgbe_write_reg(h, r, v)
 
-u32 ixgbe_read_reg(struct ixgbe_hw *hw, u32 reg);
-#define IXGBE_READ_REG(h, r) ixgbe_read_reg(h, r)
+u32 ixgbevf_read_reg(struct ixgbe_hw *hw, u32 reg);
+#define IXGBE_READ_REG(h, r) ixgbevf_read_reg(h, r)
 
 static inline void ixgbe_write_reg_array(struct ixgbe_hw *hw, u32 reg,
 					  u32 offset, u32 value)
@@ -199,7 +199,7 @@ static inline void ixgbe_write_reg_array(struct ixgbe_hw *hw, u32 reg,
 static inline u32 ixgbe_read_reg_array(struct ixgbe_hw *hw, u32 reg,
 					u32 offset)
 {
-	return ixgbe_read_reg(hw, reg + (offset << 2));
+	return ixgbevf_read_reg(hw, reg + (offset << 2));
 }
 #define IXGBE_READ_REG_ARRAY(h, r, o) ixgbe_read_reg_array(h, r, o)
 
-- 
cgit v1.2.2


From 21d3efdc2d47fa0e7d34329e55471e26fbf37fd7 Mon Sep 17 00:00:00 2001
From: Jean Sacren <sakiwit@gmail.com>
Date: Mon, 17 Mar 2014 18:14:39 +0000
Subject: i40e: fix function kernel doc description

The commit c7d05ca89f8e ("i40e: driver ethtool core") introduced the
new function i40e_add_del_fdir_sctpv4() with the kernel doc
description a little bit off. The trivial error was copied over to a
different file by the commit 17a73f6b1401 ("i40e: Flow Director
sideband accounting") most recently. Fix the kernel doc with the
correct description for clarity.

Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Joseph Gasparakis <joseph.gasparakis@intel.com>
Signed-off-by: Jean Sacren <sakiwit@gmail.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_txrx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index a329aacb392f..0f5d96ad281d 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -299,7 +299,7 @@ static int i40e_add_del_fdir_tcpv4(struct i40e_vsi *vsi,
  * @raw_packet: the pre-allocated packet buffer for FDir
  * @add: true adds a filter, false removes it
  *
- * Returns 0 if the filters were successfully added or removed
+ * Always returns -EOPNOTSUPP
  **/
 static int i40e_add_del_fdir_sctpv4(struct i40e_vsi *vsi,
 				    struct i40e_fdir_filter *fd_data,
-- 
cgit v1.2.2


From e3e3bfdd1d2ad4ac2020e681f3cb1e172f343810 Mon Sep 17 00:00:00 2001
From: Jean Sacren <sakiwit@gmail.com>
Date: Tue, 25 Mar 2014 04:30:27 +0000
Subject: i40e/i40evf: fix error checking path

The commit 6494294f277fd ("i40e/i40evf: Use
dma_set_mask_and_coherent") uses dma_set_mask_and_coherent() to
replace dma_set_coherent_mask() for the benefit of return error.
The conversion brings some confusion in error checking as whether
against DMA_BIT_MASK(64) or DMA_BIT_MASK(32). For one, if error is
zero, the check will be against DMA_BIT_MASK(64) twice. Fix this
error checking by binding the check to the pertinent one.

Cc: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jean Sacren <sakiwit@gmail.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c     | 11 ++++++-----
 drivers/net/ethernet/intel/i40evf/i40evf_main.c | 11 ++++++-----
 2 files changed, 12 insertions(+), 10 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index a1ec793b93db..861b722c2672 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -8091,12 +8091,13 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	/* set up for high or low dma */
 	err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
-	if (err)
-		err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
 	if (err) {
-		dev_err(&pdev->dev,
-			"DMA configuration failed: 0x%x\n", err);
-		goto err_dma;
+		err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+		if (err) {
+			dev_err(&pdev->dev,
+				"DMA configuration failed: 0x%x\n", err);
+			goto err_dma;
+		}
 	}
 
 	/* set up pci connections */
diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index 51c84c19d2be..e35e66ffa782 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -2191,12 +2191,13 @@ static int i40evf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		return err;
 
 	err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
-	if (err)
-		err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
 	if (err) {
-		dev_err(&pdev->dev,
-			"DMA configuration failed: 0x%x\n", err);
-		goto err_dma;
+		err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+		if (err) {
+			dev_err(&pdev->dev,
+				"DMA configuration failed: 0x%x\n", err);
+			goto err_dma;
+		}
 	}
 
 	err = pci_request_regions(pdev, i40evf_driver_name);
-- 
cgit v1.2.2


From b58f2f72797cf45f0e6867f671ff42128b84834b Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Tue, 25 Mar 2014 04:30:32 +0000
Subject: i40e/i40evf: Remove addressof casts to same type

Using addressof then casting to the original type is pointless,
so remove these unnecessary casts.

Done via coccinelle script:

$ cat typecast.cocci
@@
type T;
T foo;
@@

-	(T *)&foo
+	&foo

Signed-off-by: Joe Perches <joe@perches.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_common.c   | 4 ++--
 drivers/net/ethernet/intel/i40evf/i40e_common.c | 3 +--
 2 files changed, 3 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_common.c b/drivers/net/ethernet/intel/i40e/i40e_common.c
index bb948dd92474..922cdcc45c54 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_common.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_common.c
@@ -1775,9 +1775,9 @@ static void i40e_parse_discover_capabilities(struct i40e_hw *hw, void *buff,
 	cap = (struct i40e_aqc_list_capabilities_element_resp *) buff;
 
 	if (list_type_opc == i40e_aqc_opc_list_dev_capabilities)
-		p = (struct i40e_hw_capabilities *)&hw->dev_caps;
+		p = &hw->dev_caps;
 	else if (list_type_opc == i40e_aqc_opc_list_func_capabilities)
-		p = (struct i40e_hw_capabilities *)&hw->func_caps;
+		p = &hw->func_caps;
 	else
 		return;
 
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_common.c b/drivers/net/ethernet/intel/i40evf/i40e_common.c
index c688a0fc5c29..ae084378faab 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_common.c
+++ b/drivers/net/ethernet/intel/i40evf/i40e_common.c
@@ -565,8 +565,7 @@ i40e_status i40e_aq_send_msg_to_pf(struct i40e_hw *hw,
 		details.async = true;
 		cmd_details = &details;
 	}
-	status = i40evf_asq_send_command(hw, (struct i40e_aq_desc *)&desc, msg,
-				       msglen, cmd_details);
+	status = i40evf_asq_send_command(hw, &desc, msg, msglen, cmd_details);
 	return status;
 }
 
-- 
cgit v1.2.2


From 3dbb7fd24794e39e503bc7844dae03c17d821326 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Tue, 25 Mar 2014 04:30:38 +0000
Subject: i40e: Remove casts of pointer to same type

Casting a pointer to a pointer of the same type is pointless,
so remove these unnecessary casts.

Done via coccinelle script:

$ cat typecast_2.cocci
@@
type T;
T *foo;
@@

-	(T *)foo
+	foo

Signed-off-by: Joe Perches <joe@perches.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index aa123f43fb8e..03d99cbc5c25 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -396,7 +396,7 @@ static int i40e_get_eeprom(struct net_device *netdev,
 		ret_val = i40e_aq_read_nvm(hw, 0x0,
 				eeprom->offset + (I40E_NVM_SECTOR_SIZE * i),
 				len,
-				(u8 *)eeprom_buff + (I40E_NVM_SECTOR_SIZE * i),
+				eeprom_buff + (I40E_NVM_SECTOR_SIZE * i),
 				last, NULL);
 		if (ret_val) {
 			dev_info(&pf->pdev->dev,
@@ -408,7 +408,7 @@ static int i40e_get_eeprom(struct net_device *netdev,
 
 release_nvm:
 	i40e_release_nvm(hw);
-	memcpy(bytes, (u8 *)eeprom_buff, eeprom->len);
+	memcpy(bytes, eeprom_buff, eeprom->len);
 free_buff:
 	kfree(eeprom_buff);
 	return ret_val;
-- 
cgit v1.2.2


From 75009b3a88cd8f56315eb4ced296ee2f060cf946 Mon Sep 17 00:00:00 2001
From: Peter Senna Tschudin <peter.senna@gmail.com>
Date: Thu, 20 Mar 2014 03:31:08 +0000
Subject: INTEL-IGB: Convert iounmap to pci_iounmap

Use pci_iounmap instead of iounmap when the virtual mapping was done
with pci_iomap. A simplified version of the semantic patch that finds this
issue is as follows: (http://coccinelle.lip6.fr/)

// <smpl>
@r@
expression addr;
@@
addr = pci_iomap(...)

@rr@
expression r.addr;
@@
* iounmap(addr)
// </smpl>

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/igb/igb_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 55fc5596e2d0..30198185d19a 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -2652,7 +2652,7 @@ err_eeprom:
 		iounmap(hw->flash_address);
 err_sw_init:
 	igb_clear_interrupt_scheme(adapter);
-	iounmap(hw->hw_addr);
+	pci_iounmap(pdev, hw->hw_addr);
 err_ioremap:
 	free_netdev(netdev);
 err_alloc_etherdev:
@@ -2819,7 +2819,7 @@ static void igb_remove(struct pci_dev *pdev)
 	igb_disable_sriov(pdev);
 #endif
 
-	iounmap(hw->hw_addr);
+	pci_iounmap(pdev, hw->hw_addr);
 	if (hw->flash_address)
 		iounmap(hw->flash_address);
 	pci_release_selected_regions(pdev,
-- 
cgit v1.2.2


From 41c62843eb6a0ea3e2f1e06ca3ec7b2f64452f7b Mon Sep 17 00:00:00 2001
From: Mark Rustad <mark.d.rustad@intel.com>
Date: Wed, 12 Mar 2014 00:38:35 +0000
Subject: ixgbe: Fix rcu warnings induced by LER

Resolve some rcu warnings produced when LER actions take place.
This appears to be due to not holding the rtnl lock when calling
ixgbe_down, so hold the lock. Also avoid disabling the device
when it is already disabled. This check is necessary because the
callback can be called more than once in some cases.

Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe.h      |  1 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 23 ++++++++++++++++++-----
 2 files changed, 19 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
index 26d27aae9793..55c53a1cbb62 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
@@ -808,6 +808,7 @@ enum ixgbe_state_t {
 	__IXGBE_TESTING,
 	__IXGBE_RESETTING,
 	__IXGBE_DOWN,
+	__IXGBE_DISABLED,
 	__IXGBE_REMOVING,
 	__IXGBE_SERVICE_SCHED,
 	__IXGBE_IN_SFP_INIT,
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index c4b930c0ce7f..8436c651b735 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -5566,6 +5566,8 @@ static int ixgbe_resume(struct pci_dev *pdev)
 		e_dev_err("Cannot enable PCI device from suspend\n");
 		return err;
 	}
+	smp_mb__before_clear_bit();
+	clear_bit(__IXGBE_DISABLED, &adapter->state);
 	pci_set_master(pdev);
 
 	pci_wake_from_d3(pdev, false);
@@ -5663,7 +5665,8 @@ static int __ixgbe_shutdown(struct pci_dev *pdev, bool *enable_wake)
 
 	ixgbe_release_hw_control(adapter);
 
-	pci_disable_device(pdev);
+	if (!test_and_set_bit(__IXGBE_DISABLED, &adapter->state))
+		pci_disable_device(pdev);
 
 	return 0;
 }
@@ -8313,7 +8316,8 @@ err_alloc_etherdev:
 				     pci_select_bars(pdev, IORESOURCE_MEM));
 err_pci_reg:
 err_dma:
-	pci_disable_device(pdev);
+	if (!test_and_set_bit(__IXGBE_DISABLED, &adapter->state))
+		pci_disable_device(pdev);
 	return err;
 }
 
@@ -8382,7 +8386,8 @@ static void ixgbe_remove(struct pci_dev *pdev)
 
 	pci_disable_pcie_error_reporting(pdev);
 
-	pci_disable_device(pdev);
+	if (!test_and_set_bit(__IXGBE_DISABLED, &adapter->state))
+		pci_disable_device(pdev);
 }
 
 /**
@@ -8489,14 +8494,20 @@ static pci_ers_result_t ixgbe_io_error_detected(struct pci_dev *pdev,
 
 skip_bad_vf_detection:
 #endif /* CONFIG_PCI_IOV */
+	rtnl_lock();
 	netif_device_detach(netdev);
 
-	if (state == pci_channel_io_perm_failure)
+	if (state == pci_channel_io_perm_failure) {
+		rtnl_unlock();
 		return PCI_ERS_RESULT_DISCONNECT;
+	}
 
 	if (netif_running(netdev))
 		ixgbe_down(adapter);
-	pci_disable_device(pdev);
+
+	if (!test_and_set_bit(__IXGBE_DISABLED, &adapter->state))
+		pci_disable_device(pdev);
+	rtnl_unlock();
 
 	/* Request a slot reset. */
 	return PCI_ERS_RESULT_NEED_RESET;
@@ -8518,6 +8529,8 @@ static pci_ers_result_t ixgbe_io_slot_reset(struct pci_dev *pdev)
 		e_err(probe, "Cannot re-enable PCI device after reset.\n");
 		result = PCI_ERS_RESULT_DISCONNECT;
 	} else {
+		smp_mb__before_clear_bit();
+		clear_bit(__IXGBE_DISABLED, &adapter->state);
 		adapter->hw.hw_addr = adapter->io_addr;
 		pci_set_master(pdev);
 		pci_restore_state(pdev);
-- 
cgit v1.2.2


From bc0c715167c68ac2e737e221a80fc2a413f48155 Mon Sep 17 00:00:00 2001
From: Mark Rustad <mark.d.rustad@intel.com>
Date: Wed, 12 Mar 2014 00:38:45 +0000
Subject: ixgbevf: Fix rcu warnings induced by LER

Resolve some rcu warnings produced when LER actions take place.
This appears to be due to not holding the rtnl lock when calling
ixgbe_down, so hold the lock. Also avoid disabling the device
when it is already disabled. This check is necessary because the
callback can be called more than once in some cases.

Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbevf/ixgbevf.h      |  1 +
 drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 22 +++++++++++++++++-----
 2 files changed, 18 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf.h b/drivers/net/ethernet/intel/ixgbevf/ixgbevf.h
index a08bd7c46766..e7e7d695816b 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf.h
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf.h
@@ -419,6 +419,7 @@ enum ixbgevf_state_t {
 	__IXGBEVF_TESTING,
 	__IXGBEVF_RESETTING,
 	__IXGBEVF_DOWN,
+	__IXGBEVF_DISABLED,
 	__IXGBEVF_REMOVING,
 };
 
diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
index 5d9375981713..4ba139b2d25a 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
@@ -3329,7 +3329,8 @@ static int ixgbevf_suspend(struct pci_dev *pdev, pm_message_t state)
 		return retval;
 
 #endif
-	pci_disable_device(pdev);
+	if (!test_and_set_bit(__IXGBEVF_DISABLED, &adapter->state))
+		pci_disable_device(pdev);
 
 	return 0;
 }
@@ -3353,6 +3354,8 @@ static int ixgbevf_resume(struct pci_dev *pdev)
 		dev_err(&pdev->dev, "Cannot enable PCI device from suspend\n");
 		return err;
 	}
+	smp_mb__before_clear_bit();
+	clear_bit(__IXGBEVF_DISABLED, &adapter->state);
 	pci_set_master(pdev);
 
 	ixgbevf_reset(adapter);
@@ -3607,7 +3610,8 @@ err_alloc_etherdev:
 	pci_release_regions(pdev);
 err_pci_reg:
 err_dma:
-	pci_disable_device(pdev);
+	if (!test_and_set_bit(__IXGBEVF_DISABLED, &adapter->state))
+		pci_disable_device(pdev);
 	return err;
 }
 
@@ -3645,7 +3649,8 @@ static void ixgbevf_remove(struct pci_dev *pdev)
 
 	free_netdev(netdev);
 
-	pci_disable_device(pdev);
+	if (!test_and_set_bit(__IXGBEVF_DISABLED, &adapter->state))
+		pci_disable_device(pdev);
 }
 
 /**
@@ -3662,15 +3667,20 @@ static pci_ers_result_t ixgbevf_io_error_detected(struct pci_dev *pdev,
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct ixgbevf_adapter *adapter = netdev_priv(netdev);
 
+	rtnl_lock();
 	netif_device_detach(netdev);
 
-	if (state == pci_channel_io_perm_failure)
+	if (state == pci_channel_io_perm_failure) {
+		rtnl_unlock();
 		return PCI_ERS_RESULT_DISCONNECT;
+	}
 
 	if (netif_running(netdev))
 		ixgbevf_down(adapter);
 
-	pci_disable_device(pdev);
+	if (!test_and_set_bit(__IXGBEVF_DISABLED, &adapter->state))
+		pci_disable_device(pdev);
+	rtnl_unlock();
 
 	/* Request a slot slot reset. */
 	return PCI_ERS_RESULT_NEED_RESET;
@@ -3694,6 +3704,8 @@ static pci_ers_result_t ixgbevf_io_slot_reset(struct pci_dev *pdev)
 		return PCI_ERS_RESULT_DISCONNECT;
 	}
 
+	smp_mb__before_clear_bit();
+	clear_bit(__IXGBEVF_DISABLED, &adapter->state);
 	pci_set_master(pdev);
 
 	ixgbevf_reset(adapter);
-- 
cgit v1.2.2


From 636d0375e7a850c95a0abc2c214295ce06cd2ab4 Mon Sep 17 00:00:00 2001
From: Bjorn Van Tilt <bjorn.vantilt@gmail.com>
Date: Mon, 24 Mar 2014 15:32:08 +0100
Subject: can: usb_8dev: Fix memory leak in usb_8dev_start_xmit

Fixed a memory leak when an error occurred in the transmit function. In the
error handling the urb wasn't freed before returning. There was also a call to
the usb_unanchor_urb() function but the urb wasn't anchored.

Signed-off-by: Bjorn Van Tilt <bjorn.vantilt@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/usb/usb_8dev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/can/usb/usb_8dev.c b/drivers/net/can/usb/usb_8dev.c
index a0fa1fd5092b..e7247a506586 100644
--- a/drivers/net/can/usb/usb_8dev.c
+++ b/drivers/net/can/usb/usb_8dev.c
@@ -697,8 +697,8 @@ static netdev_tx_t usb_8dev_start_xmit(struct sk_buff *skb,
 	return NETDEV_TX_OK;
 
 nofreecontext:
-	usb_unanchor_urb(urb);
 	usb_free_coherent(priv->udev, size, buf, urb->transfer_dma);
+	usb_free_urb(urb);
 
 	netdev_warn(netdev, "couldn't find free context");
 
-- 
cgit v1.2.2


From f29b423834be812b736bf5e804290c3e14b1dd67 Mon Sep 17 00:00:00 2001
From: Marc Kleine-Budde <mkl@pengutronix.de>
Date: Tue, 18 Mar 2014 19:13:59 +0100
Subject: can: c_can: free_c_can_dev(): add missing netif_napi_del()

This patch adds the missing netif_napi_del() to the free_c_can_dev() function.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/c_can/c_can.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
index 951bfede8f3d..6c03731d7ee7 100644
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -1269,6 +1269,9 @@ EXPORT_SYMBOL_GPL(c_can_power_up);
 
 void free_c_can_dev(struct net_device *dev)
 {
+	struct c_can_priv *priv = netdev_priv(dev);
+
+	netif_napi_del(&priv->napi);
 	free_candev(dev);
 }
 EXPORT_SYMBOL_GPL(free_c_can_dev);
-- 
cgit v1.2.2


From 130a5171dad06c6d89fd5568260fbb0c4b34bd74 Mon Sep 17 00:00:00 2001
From: Marc Kleine-Budde <mkl@pengutronix.de>
Date: Tue, 18 Mar 2014 19:06:01 +0100
Subject: can: c_can: check return value to users of c_can_set_bittiming()

This patch adds return value checking to all direct and indirect users of
c_can_set_bittiming().

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/c_can/c_can.c | 34 ++++++++++++++++++++++------------
 1 file changed, 22 insertions(+), 12 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
index 6c03731d7ee7..68839380086d 100644
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -631,7 +631,7 @@ static void c_can_configure_msg_objects(struct net_device *dev)
  * - set operating mode
  * - configure message objects
  */
-static void c_can_chip_config(struct net_device *dev)
+static int c_can_chip_config(struct net_device *dev)
 {
 	struct c_can_priv *priv = netdev_priv(dev);
 
@@ -668,15 +668,18 @@ static void c_can_chip_config(struct net_device *dev)
 	priv->write_reg(priv, C_CAN_STS_REG, LEC_UNUSED);
 
 	/* set bittiming params */
-	c_can_set_bittiming(dev);
+	return c_can_set_bittiming(dev);
 }
 
-static void c_can_start(struct net_device *dev)
+static int c_can_start(struct net_device *dev)
 {
 	struct c_can_priv *priv = netdev_priv(dev);
+	int err;
 
 	/* basic c_can configuration */
-	c_can_chip_config(dev);
+	err = c_can_chip_config(dev);
+	if (err)
+		return err;
 
 	priv->can.state = CAN_STATE_ERROR_ACTIVE;
 
@@ -685,6 +688,8 @@ static void c_can_start(struct net_device *dev)
 
 	/* enable status change, error and module interrupts */
 	c_can_enable_all_interrupts(priv, ENABLE_ALL_INTERRUPTS);
+
+	return 0;
 }
 
 static void c_can_stop(struct net_device *dev)
@@ -700,9 +705,13 @@ static void c_can_stop(struct net_device *dev)
 
 static int c_can_set_mode(struct net_device *dev, enum can_mode mode)
 {
+	int err;
+
 	switch (mode) {
 	case CAN_MODE_START:
-		c_can_start(dev);
+		err = c_can_start(dev);
+		if (err)
+			return err;
 		netif_wake_queue(dev);
 		break;
 	default:
@@ -1133,17 +1142,20 @@ static int c_can_open(struct net_device *dev)
 		goto exit_irq_fail;
 	}
 
-	napi_enable(&priv->napi);
+	/* start the c_can controller */
+	err = c_can_start(dev);
+	if (err)
+		goto exit_start_fail;
 
 	can_led_event(dev, CAN_LED_EVENT_OPEN);
 
-	/* start the c_can controller */
-	c_can_start(dev);
-
+	napi_enable(&priv->napi);
 	netif_start_queue(dev);
 
 	return 0;
 
+exit_start_fail:
+	free_irq(dev->irq, dev);
 exit_irq_fail:
 	close_candev(dev);
 exit_open_fail:
@@ -1260,9 +1272,7 @@ int c_can_power_up(struct net_device *dev)
 	if (time_after(jiffies, time_out))
 		return -ETIMEDOUT;
 
-	c_can_start(dev);
-
-	return 0;
+	return c_can_start(dev);
 }
 EXPORT_SYMBOL_GPL(c_can_power_up);
 #endif
-- 
cgit v1.2.2


From 9fac1d1ab8e66816c40a235a238357b1f1fc4dee Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Tue, 18 Mar 2014 17:19:08 +0000
Subject: can: c_can: Wait for CONTROL_INIT to be cleared

According to the documentation the CPU must wait for CONTROL_INIT to
be cleared before writing to the baudrate registers.

Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/c_can/c_can.c | 26 +++++++++++++++++++++++---
 1 file changed, 23 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
index 68839380086d..4d08a32f27ac 100644
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -566,6 +566,21 @@ static netdev_tx_t c_can_start_xmit(struct sk_buff *skb,
 	return NETDEV_TX_OK;
 }
 
+static int c_can_wait_for_ctrl_init(struct net_device *dev,
+				    struct c_can_priv *priv, u32 init)
+{
+	int retry = 0;
+
+	while (init != (priv->read_reg(priv, C_CAN_CTRL_REG) & CONTROL_INIT)) {
+		udelay(10);
+		if (retry++ > 1000) {
+			netdev_err(dev, "CCTRL: set CONTROL_INIT failed\n");
+			return -EIO;
+		}
+	}
+	return 0;
+}
+
 static int c_can_set_bittiming(struct net_device *dev)
 {
 	unsigned int reg_btr, reg_brpe, ctrl_save;
@@ -573,6 +588,7 @@ static int c_can_set_bittiming(struct net_device *dev)
 	u32 ten_bit_brp;
 	struct c_can_priv *priv = netdev_priv(dev);
 	const struct can_bittiming *bt = &priv->can.bittiming;
+	int res;
 
 	/* c_can provides a 6-bit brp and 4-bit brpe fields */
 	ten_bit_brp = bt->brp - 1;
@@ -590,13 +606,17 @@ static int c_can_set_bittiming(struct net_device *dev)
 		"setting BTR=%04x BRPE=%04x\n", reg_btr, reg_brpe);
 
 	ctrl_save = priv->read_reg(priv, C_CAN_CTRL_REG);
-	priv->write_reg(priv, C_CAN_CTRL_REG,
-			ctrl_save | CONTROL_CCE | CONTROL_INIT);
+	ctrl_save &= ~CONTROL_INIT;
+	priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_CCE | CONTROL_INIT);
+	res = c_can_wait_for_ctrl_init(dev, priv, CONTROL_INIT);
+	if (res)
+		return res;
+
 	priv->write_reg(priv, C_CAN_BTR_REG, reg_btr);
 	priv->write_reg(priv, C_CAN_BRPEXT_REG, reg_brpe);
 	priv->write_reg(priv, C_CAN_CTRL_REG, ctrl_save);
 
-	return 0;
+	return c_can_wait_for_ctrl_init(dev, priv, 0);
 }
 
 /*
-- 
cgit v1.2.2


From 5bb9cbaa622a2bbde8e307d4e0528dd2c8212a6a Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Tue, 18 Mar 2014 17:19:08 +0000
Subject: can: c_can: Fix hardware raminit function

The function is broken in several ways:

    - The function does not wait for the init to complete.
      That can take quite some microseconds.

    - No protection against being called for two chips at the same
      time. SMP is such a new thing, right?

Clear the start and the init done bit unconditionally and wait for both bits to
be clear.

In the enable path set the init bit and wait for the init done bit.

Add proper locking.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/c_can/c_can_platform.c | 47 ++++++++++++++++++++++++++--------
 1 file changed, 37 insertions(+), 10 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c
index d66ac265269c..806d92753427 100644
--- a/drivers/net/can/c_can/c_can_platform.c
+++ b/drivers/net/can/c_can/c_can_platform.c
@@ -37,8 +37,10 @@
 
 #include "c_can.h"
 
-#define CAN_RAMINIT_START_MASK(i)	(1 << (i))
-
+#define CAN_RAMINIT_START_MASK(i)	(0x001 << (i))
+#define CAN_RAMINIT_DONE_MASK(i)	(0x100 << (i))
+#define CAN_RAMINIT_ALL_MASK(i)		(0x101 << (i))
+static DEFINE_SPINLOCK(raminit_lock);
 /*
  * 16-bit c_can registers can be arranged differently in the memory
  * architecture of different implementations. For example: 16-bit
@@ -69,16 +71,41 @@ static void c_can_plat_write_reg_aligned_to_32bit(struct c_can_priv *priv,
 	writew(val, priv->base + 2 * priv->regs[index]);
 }
 
+static void c_can_hw_raminit_wait(const struct c_can_priv *priv, u32 mask,
+				  u32 val)
+{
+	/* We look only at the bits of our instance. */
+	val &= mask;
+	while ((readl(priv->raminit_ctrlreg) & mask) != val)
+		udelay(1);
+}
+
 static void c_can_hw_raminit(const struct c_can_priv *priv, bool enable)
 {
-	u32 val;
-
-	val = readl(priv->raminit_ctrlreg);
-	if (enable)
-		val |= CAN_RAMINIT_START_MASK(priv->instance);
-	else
-		val &= ~CAN_RAMINIT_START_MASK(priv->instance);
-	writel(val, priv->raminit_ctrlreg);
+	u32 mask = CAN_RAMINIT_ALL_MASK(priv->instance);
+	u32 ctrl;
+
+	spin_lock(&raminit_lock);
+
+	ctrl = readl(priv->raminit_ctrlreg);
+	/* We clear the done and start bit first. The start bit is
+	 * looking at the 0 -> transition, but is not self clearing;
+	 * And we clear the init done bit as well.
+	 */
+	ctrl &= ~CAN_RAMINIT_START_MASK(priv->instance);
+	ctrl |= CAN_RAMINIT_DONE_MASK(priv->instance);
+	writel(ctrl, priv->raminit_ctrlreg);
+	ctrl &= ~CAN_RAMINIT_DONE_MASK(priv->instance);
+	c_can_hw_raminit_wait(priv, ctrl, mask);
+
+	if (enable) {
+		/* Set start bit and wait for the done bit. */
+		ctrl |= CAN_RAMINIT_START_MASK(priv->instance);
+		writel(ctrl, priv->raminit_ctrlreg);
+		ctrl |= CAN_RAMINIT_DONE_MASK(priv->instance);
+		c_can_hw_raminit_wait(priv, ctrl, mask);
+	}
+	spin_unlock(&raminit_lock);
 }
 
 static struct platform_device_id c_can_id_table[] = {
-- 
cgit v1.2.2


From 640916db2bf7de7c5ac13a1f470fa959459ccf6d Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Tue, 18 Mar 2014 17:19:09 +0000
Subject: can: c_can: Make it SMP safe

The hardware has two message control interfaces, but the code only uses the
first one. So on SMP the following can be observed:

CPU0 	       	CPU1
rx_poll()
  write IF1	xmit()
		write IF1
  write IF1

That results in corrupted message object configurations. The TX/RX is not
globally serialized it's only serialized on a core.

Simple solution: Let RX use IF1 and TX use IF2 and all is good.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/c_can/c_can.c | 36 +++++++++++++++++++++---------------
 1 file changed, 21 insertions(+), 15 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
index 4d08a32f27ac..38f9adaf15ac 100644
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -132,6 +132,12 @@
 #define IF_MCONT_EOB		BIT(7)
 #define IF_MCONT_DLC_MASK	0xf
 
+/*
+ * Use IF1 for RX and IF2 for TX
+ */
+#define IF_RX			0
+#define IF_TX			1
+
 /*
  * IFx register masks:
  * allow easy operation on 16-bit registers when the
@@ -420,7 +426,7 @@ static void c_can_handle_lost_msg_obj(struct net_device *dev,
 	priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface),
 			IF_MCONT_CLR_MSGLST);
 
-	c_can_object_put(dev, 0, objno, IF_COMM_CONTROL);
+	c_can_object_put(dev, iface, objno, IF_COMM_CONTROL);
 
 	/* create an error msg */
 	skb = alloc_can_err_skb(dev, &frame);
@@ -551,7 +557,7 @@ static netdev_tx_t c_can_start_xmit(struct sk_buff *skb,
 	msg_obj_no = get_tx_next_msg_obj(priv);
 
 	/* prepare message object for transmission */
-	c_can_write_msg_object(dev, 0, frame, msg_obj_no);
+	c_can_write_msg_object(dev, IF_TX, frame, msg_obj_no);
 	can_put_echo_skb(skb, dev, msg_obj_no - C_CAN_MSG_OBJ_TX_FIRST);
 
 	/*
@@ -634,14 +640,14 @@ static void c_can_configure_msg_objects(struct net_device *dev)
 
 	/* first invalidate all message objects */
 	for (i = C_CAN_MSG_OBJ_RX_FIRST; i <= C_CAN_NO_OF_OBJECTS; i++)
-		c_can_inval_msg_object(dev, 0, i);
+		c_can_inval_msg_object(dev, IF_RX, i);
 
 	/* setup receive message objects */
 	for (i = C_CAN_MSG_OBJ_RX_FIRST; i < C_CAN_MSG_OBJ_RX_LAST; i++)
-		c_can_setup_receive_object(dev, 0, i, 0, 0,
+		c_can_setup_receive_object(dev, IF_RX, i, 0, 0,
 			(IF_MCONT_RXIE | IF_MCONT_UMASK) & ~IF_MCONT_EOB);
 
-	c_can_setup_receive_object(dev, 0, C_CAN_MSG_OBJ_RX_LAST, 0, 0,
+	c_can_setup_receive_object(dev, IF_RX, C_CAN_MSG_OBJ_RX_LAST, 0, 0,
 			IF_MCONT_EOB | IF_MCONT_RXIE | IF_MCONT_UMASK);
 }
 
@@ -792,13 +798,13 @@ static void c_can_do_tx(struct net_device *dev)
 		if (!(val & (1 << (msg_obj_no - 1)))) {
 			can_get_echo_skb(dev,
 					msg_obj_no - C_CAN_MSG_OBJ_TX_FIRST);
-			c_can_object_get(dev, 0, msg_obj_no, IF_COMM_ALL);
+			c_can_object_get(dev, IF_TX, msg_obj_no, IF_COMM_ALL);
 			stats->tx_bytes += priv->read_reg(priv,
-					C_CAN_IFACE(MSGCTRL_REG, 0))
+					C_CAN_IFACE(MSGCTRL_REG, IF_TX))
 					& IF_MCONT_DLC_MASK;
 			stats->tx_packets++;
 			can_led_event(dev, CAN_LED_EVENT_TX);
-			c_can_inval_msg_object(dev, 0, msg_obj_no);
+			c_can_inval_msg_object(dev, IF_TX, msg_obj_no);
 		} else {
 			break;
 		}
@@ -850,13 +856,13 @@ static int c_can_do_rx_poll(struct net_device *dev, int quota)
 		while ((msg_obj = ffs(val)) && quota > 0) {
 			val &= ~BIT(msg_obj - 1);
 
-			c_can_object_get(dev, 0, msg_obj, IF_COMM_ALL &
+			c_can_object_get(dev, IF_RX, msg_obj, IF_COMM_ALL &
 					~IF_COMM_TXRQST);
 			msg_ctrl_save = priv->read_reg(priv,
-					C_CAN_IFACE(MSGCTRL_REG, 0));
+					C_CAN_IFACE(MSGCTRL_REG, IF_RX));
 
 			if (msg_ctrl_save & IF_MCONT_MSGLST) {
-				c_can_handle_lost_msg_obj(dev, 0, msg_obj);
+				c_can_handle_lost_msg_obj(dev, IF_RX, msg_obj);
 				num_rx_pkts++;
 				quota--;
 				continue;
@@ -869,19 +875,19 @@ static int c_can_do_rx_poll(struct net_device *dev, int quota)
 				continue;
 
 			/* read the data from the message object */
-			c_can_read_msg_object(dev, 0, msg_ctrl_save);
+			c_can_read_msg_object(dev, IF_RX, msg_ctrl_save);
 
 			if (msg_obj < C_CAN_MSG_RX_LOW_LAST)
-				c_can_mark_rx_msg_obj(dev, 0,
+				c_can_mark_rx_msg_obj(dev, IF_RX,
 						msg_ctrl_save, msg_obj);
 			else if (msg_obj > C_CAN_MSG_RX_LOW_LAST)
 				/* activate this msg obj */
-				c_can_activate_rx_msg_obj(dev, 0,
+				c_can_activate_rx_msg_obj(dev, IF_RX,
 						msg_ctrl_save, msg_obj);
 			else if (msg_obj == C_CAN_MSG_RX_LOW_LAST)
 				/* activate all lower message objects */
 				c_can_activate_all_lower_rx_msg_obj(dev,
-						0, msg_ctrl_save);
+						IF_RX, msg_ctrl_save);
 
 			num_rx_pkts++;
 			quota--;
-- 
cgit v1.2.2


From 64f08f2f3544eb8b6b14fd35e6087d7d3ede77cd Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Tue, 18 Mar 2014 17:19:10 +0000
Subject: can: c_can: Fix buffer ordering

The buffer handling of c_can has been broken forever. That leads to
message reordering:

ksoftirqd/0-3     [000] ..s.    79.123776: c_can_poll: rx_poll: val: 00007fff
ksoftirqd/0-3     [000] ..s.    79.124101: c_can_poll: rx_poll: val: 00008001

What happens is:

CPU				HW
				queue new packet into obj 16 (0-15 are busy)
read obj 1-15
return because pending is 0
				set pending obj 16 -> pending reg 8000
				queue new packet into obj 1
				set pending obj 1 -> pending reg 8001

So the current algorithmus reads the newest message first, which
violates the ordering rules of CAN.

Add proper handling of that situation by analyzing the contents of the
pending register for gaps.

This does NOT fix the message object corruption which can lead to
interrupt storms. Thats addressed in the next patches.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[mkl: adjusted subject]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/c_can/c_can.c | 52 +++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 50 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
index 38f9adaf15ac..cef9967eff93 100644
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -816,6 +816,38 @@ static void c_can_do_tx(struct net_device *dev)
 		netif_wake_queue(dev);
 }
 
+/*
+ * If we have a gap in the pending bits, that means we either
+ * raced with the hardware or failed to readout all upper
+ * objects in the last run due to quota limit.
+ */
+static u32 c_can_adjust_pending(u32 pend)
+{
+	u32 weight, lasts;
+
+	if (pend == RECEIVE_OBJECT_BITS)
+		return pend;
+
+	/*
+	 * If the last set bit is larger than the number of pending
+	 * bits we have a gap.
+	 */
+	weight = hweight32(pend);
+	lasts = fls(pend);
+
+	/* If the bits are linear, nothing to do */
+	if (lasts == weight)
+		return pend;
+
+	/*
+	 * Find the first set bit after the gap. We walk backwards
+	 * from the last set bit.
+	 */
+	for (lasts--; pend & (1 << (lasts - 1)); lasts--);
+
+	return pend & ~((1 << lasts) - 1);
+}
+
 /*
  * theory of operation:
  *
@@ -843,7 +875,7 @@ static int c_can_do_rx_poll(struct net_device *dev, int quota)
 	u32 num_rx_pkts = 0;
 	unsigned int msg_obj, msg_ctrl_save;
 	struct c_can_priv *priv = netdev_priv(dev);
-	u16 val;
+	u32 val, pend = 0;
 
 	/*
 	 * It is faster to read only one 16bit register. This is only possible
@@ -852,7 +884,23 @@ static int c_can_do_rx_poll(struct net_device *dev, int quota)
 	BUILD_BUG_ON_MSG(C_CAN_MSG_OBJ_RX_LAST > 16,
 			"Implementation does not support more message objects than 16");
 
-	while (quota > 0 && (val = priv->read_reg(priv, C_CAN_INTPND1_REG))) {
+	while (quota > 0) {
+
+		if (!pend) {
+			pend = priv->read_reg(priv, C_CAN_INTPND1_REG);
+			if (!pend)
+				return num_rx_pkts;
+			/*
+			 * If the pending field has a gap, handle the
+			 * bits above the gap first.
+			 */
+			val = c_can_adjust_pending(pend);
+		} else {
+			val = pend;
+		}
+		/* Remove the bits from pend */
+		pend &= ~val;
+
 		while ((msg_obj = ffs(val)) && quota > 0) {
 			val &= ~BIT(msg_obj - 1);
 
-- 
cgit v1.2.2


From 07c7b6f6161be52b8ab6bca70ed6a7140708c94e Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Tue, 18 Mar 2014 17:19:10 +0000
Subject: can: c_can: Fix the lost message handling

The lost message handling is broken in several ways.

1) Clearing the message lost flag is done by writing 0 to the
   message control register of the object.

   #define IF_MCONT_CLR_MSGLST    (0 << 14)

   That clears the object buffer configuration in the worst case,
   which results in a loss of the EOB flag. That leaves the FIFO chain
   without a limit and causes a complete lockup of the HW

2) In case that the error skb allocation fails, the code happily
   claims that it handed down a packet. Just an accounting bug, but ....

3) The code adds a lot of pointless overhead to that error case, where
   we need to get stuff done as fast as possible to avoid more packet
   loss.

   - printk an annoying error message
   - reread the object buffer for nothing

Fix is simple again:

  - Use the already known MSGCTRL content and only clear the MSGLST bit
  - Fix the buffer accounting by adding a proper return code
  - Remove the pointless operations

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/c_can/c_can.c | 31 +++++++++++++++----------------
 1 file changed, 15 insertions(+), 16 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
index cef9967eff93..ef5f3b8099f4 100644
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -122,7 +122,6 @@
 /* IFx message control */
 #define IF_MCONT_NEWDAT		BIT(15)
 #define IF_MCONT_MSGLST		BIT(14)
-#define IF_MCONT_CLR_MSGLST	(0 << 14)
 #define IF_MCONT_INTPND		BIT(13)
 #define IF_MCONT_UMASK		BIT(12)
 #define IF_MCONT_TXIE		BIT(11)
@@ -411,27 +410,22 @@ static inline void c_can_activate_rx_msg_obj(struct net_device *dev,
 	c_can_object_put(dev, iface, obj, IF_COMM_CONTROL);
 }
 
-static void c_can_handle_lost_msg_obj(struct net_device *dev,
-					int iface, int objno)
+static int c_can_handle_lost_msg_obj(struct net_device *dev,
+				     int iface, int objno, u32 ctrl)
 {
-	struct c_can_priv *priv = netdev_priv(dev);
 	struct net_device_stats *stats = &dev->stats;
-	struct sk_buff *skb;
+	struct c_can_priv *priv = netdev_priv(dev);
 	struct can_frame *frame;
+	struct sk_buff *skb;
 
-	netdev_err(dev, "msg lost in buffer %d\n", objno);
-
-	c_can_object_get(dev, iface, objno, IF_COMM_ALL & ~IF_COMM_TXRQST);
-
-	priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface),
-			IF_MCONT_CLR_MSGLST);
-
+	ctrl &= ~(IF_MCONT_MSGLST | IF_MCONT_INTPND | IF_MCONT_NEWDAT);
+	priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface), ctrl);
 	c_can_object_put(dev, iface, objno, IF_COMM_CONTROL);
 
 	/* create an error msg */
 	skb = alloc_can_err_skb(dev, &frame);
 	if (unlikely(!skb))
-		return;
+		return 0;
 
 	frame->can_id |= CAN_ERR_CRTL;
 	frame->data[1] = CAN_ERR_CRTL_RX_OVERFLOW;
@@ -439,6 +433,7 @@ static void c_can_handle_lost_msg_obj(struct net_device *dev,
 	stats->rx_over_errors++;
 
 	netif_receive_skb(skb);
+	return 1;
 }
 
 static int c_can_read_msg_object(struct net_device *dev, int iface, int ctrl)
@@ -910,9 +905,13 @@ static int c_can_do_rx_poll(struct net_device *dev, int quota)
 					C_CAN_IFACE(MSGCTRL_REG, IF_RX));
 
 			if (msg_ctrl_save & IF_MCONT_MSGLST) {
-				c_can_handle_lost_msg_obj(dev, IF_RX, msg_obj);
-				num_rx_pkts++;
-				quota--;
+				int n;
+
+				n = c_can_handle_lost_msg_obj(dev, IF_RX,
+							      msg_obj,
+							      msg_ctrl_save);
+				num_rx_pkts += n;
+				quota -=n;
 				continue;
 			}
 
-- 
cgit v1.2.2


From 710c56105dfd10e32a89086cf78cc1c8433f6a7a Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Tue, 18 Mar 2014 17:19:11 +0000
Subject: can: c_can: Remove EOB exit

The rx_poll code has the following gem:

	if (msg_ctrl_save & IF_MCONT_EOB)
		return num_rx_pkts;

The EOB bit is the indicator for the hardware that this is the last
configured FIFO object. But this object can contain valid data, if we
manage to free up objects before the overrun case hits.

Now if the code exits due to the EOB bit set, then this buffer is
stale and the interrupt bit and NewDat bit of the buffer are still
set. Results in a nice interrupt storm unless we come into an overrun
situation where the MSGLST bit gets set.

     ksoftirqd/0-3     [000] ..s.    79.124101: c_can_poll: rx_poll: val: 00008001 pend 00008001
     ksoftirqd/0-3     [000] ..s.    79.124176: c_can_poll: rx_poll: val: 00008000 pend 00008000
     ksoftirqd/0-3     [000] ..s.    79.124187: c_can_poll: rx_poll: val: 00008002 pend 00008002
     ksoftirqd/0-3     [000] ..s.    79.124256: c_can_poll: rx_poll: val: 00008000 pend 00008000
     ksoftirqd/0-3     [000] ..s.    79.124267: c_can_poll: rx_poll: val: 00008000 pend 00008000

The amazing thing is that the check of the MSGLST (aka overrun bit)
used to be after the check of the EOB bit. That was "fixed" in commit
5d0f801a2c(can: c_can: Fix RX message handling, handle lost message
before EOB). But the author of this "fix" did not even understand that
the EOB check is broken as well.

Again a simple solution: Remove

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[mkl: adjusted subject and commit message]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/c_can/c_can.c | 3 ---
 1 file changed, 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
index ef5f3b8099f4..30a85aa81d45 100644
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -915,9 +915,6 @@ static int c_can_do_rx_poll(struct net_device *dev, int quota)
 				continue;
 			}
 
-			if (msg_ctrl_save & IF_MCONT_EOB)
-				return num_rx_pkts;
-
 			if (!(msg_ctrl_save & IF_MCONT_NEWDAT))
 				continue;
 
-- 
cgit v1.2.2


From bf88a20611d5a62119a02da4eba95b461ec692c8 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Tue, 18 Mar 2014 17:19:12 +0000
Subject: can: c_can: Provide protection in the xmit path

The network core does not serialize the access to the hardware. The
xmit related code lets the following happen:

CPU0 	     	       CPU1
interrupt()
 do_poll()
   c_can_do_tx()
    Fiddle with HW and	xmit()
    internal data	  Fiddle with HW and
    	     		  internal data

due the complete lack of serialization.

Add proper locking.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/c_can/c_can.c | 9 ++++++++-
 drivers/net/can/c_can/c_can.h | 1 +
 2 files changed, 9 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
index 30a85aa81d45..1fe79ce50c5a 100644
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -549,6 +549,7 @@ static netdev_tx_t c_can_start_xmit(struct sk_buff *skb,
 	if (can_dropped_invalid_skb(dev, skb))
 		return NETDEV_TX_OK;
 
+	spin_lock_bh(&priv->xmit_lock);
 	msg_obj_no = get_tx_next_msg_obj(priv);
 
 	/* prepare message object for transmission */
@@ -563,6 +564,7 @@ static netdev_tx_t c_can_start_xmit(struct sk_buff *skb,
 	if (c_can_is_next_tx_obj_busy(priv, get_tx_next_msg_obj(priv)) ||
 			(priv->tx_next & C_CAN_NEXT_MSG_OBJ_MASK) == 0)
 		netif_stop_queue(dev);
+	spin_unlock_bh(&priv->xmit_lock);
 
 	return NETDEV_TX_OK;
 }
@@ -787,7 +789,9 @@ static void c_can_do_tx(struct net_device *dev)
 	struct c_can_priv *priv = netdev_priv(dev);
 	struct net_device_stats *stats = &dev->stats;
 
-	for (/* nix */; (priv->tx_next - priv->tx_echo) > 0; priv->tx_echo++) {
+	spin_lock_bh(&priv->xmit_lock);
+
+	for (; (priv->tx_next - priv->tx_echo) > 0; priv->tx_echo++) {
 		msg_obj_no = get_tx_echo_msg_obj(priv);
 		val = c_can_read_reg32(priv, C_CAN_TXRQST1_REG);
 		if (!(val & (1 << (msg_obj_no - 1)))) {
@@ -809,6 +813,8 @@ static void c_can_do_tx(struct net_device *dev)
 	if (((priv->tx_next & C_CAN_NEXT_MSG_OBJ_MASK) != 0) ||
 			((priv->tx_echo & C_CAN_NEXT_MSG_OBJ_MASK) == 0))
 		netif_wake_queue(dev);
+
+	spin_unlock_bh(&priv->xmit_lock);
 }
 
 /*
@@ -1262,6 +1268,7 @@ struct net_device *alloc_c_can_dev(void)
 		return NULL;
 
 	priv = netdev_priv(dev);
+	spin_lock_init(&priv->xmit_lock);
 	netif_napi_add(dev, &priv->napi, c_can_poll, C_CAN_NAPI_WEIGHT);
 
 	priv->dev = dev;
diff --git a/drivers/net/can/c_can/c_can.h b/drivers/net/can/c_can/c_can.h
index d2e1c21b143f..5097c802a61e 100644
--- a/drivers/net/can/c_can/c_can.h
+++ b/drivers/net/can/c_can/c_can.h
@@ -156,6 +156,7 @@ struct c_can_priv {
 	struct napi_struct napi;
 	struct net_device *dev;
 	struct device *device;
+	spinlock_t xmit_lock;
 	int tx_object;
 	int current_status;
 	int last_status;
-- 
cgit v1.2.2


From 520f570c4378d23b595e52213601d62332174462 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Tue, 18 Mar 2014 19:27:42 +0100
Subject: can: c_can: Make the code readable

If every other line contains line breaks, that's a clear sign for
indentation level madness. Split out the inner loop and move the code
to a separate function. gcc creates slightly worse code for that, but
we'll fix that in the next step.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[mkl: adjusted subject]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/c_can/c_can.c | 107 ++++++++++++++++++++++--------------------
 1 file changed, 56 insertions(+), 51 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
index 1fe79ce50c5a..bd7234eb42f4 100644
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -849,6 +849,52 @@ static u32 c_can_adjust_pending(u32 pend)
 	return pend & ~((1 << lasts) - 1);
 }
 
+static int c_can_read_objects(struct net_device *dev, struct c_can_priv *priv,
+			      u32 pend, int quota)
+{
+	u32 pkts = 0, ctrl, obj;
+
+	while ((obj = ffs(pend)) && quota > 0) {
+		pend &= ~BIT(obj - 1);
+
+		c_can_object_get(dev, IF_RX, obj, IF_COMM_ALL &	~IF_COMM_TXRQST);
+		ctrl = priv->read_reg(priv, C_CAN_IFACE(MSGCTRL_REG, IF_RX));
+
+		if (ctrl & IF_MCONT_MSGLST) {
+			int n = c_can_handle_lost_msg_obj(dev, IF_RX, obj, ctrl);
+
+			pkts += n;
+			quota -= n;
+			continue;
+		}
+
+		/*
+		 * This really should not happen, but this covers some
+		 * odd HW behaviour. Do not remove that unless you
+		 * want to brick your machine.
+		 */
+		if (!(ctrl & IF_MCONT_NEWDAT))
+			continue;
+
+		/* read the data from the message object */
+		c_can_read_msg_object(dev, IF_RX, ctrl);
+
+		if (obj < C_CAN_MSG_RX_LOW_LAST)
+			c_can_mark_rx_msg_obj(dev, IF_RX, ctrl, obj);
+		else if (obj > C_CAN_MSG_RX_LOW_LAST)
+			/* activate this msg obj */
+			c_can_activate_rx_msg_obj(dev, IF_RX, ctrl, obj);
+		else if (obj == C_CAN_MSG_RX_LOW_LAST)
+			/* activate all lower message objects */
+			c_can_activate_all_lower_rx_msg_obj(dev, IF_RX, ctrl);
+
+		pkts++;
+		quota--;
+	}
+
+	return pkts;
+}
+
 /*
  * theory of operation:
  *
@@ -873,10 +919,8 @@ static u32 c_can_adjust_pending(u32 pend)
  */
 static int c_can_do_rx_poll(struct net_device *dev, int quota)
 {
-	u32 num_rx_pkts = 0;
-	unsigned int msg_obj, msg_ctrl_save;
 	struct c_can_priv *priv = netdev_priv(dev);
-	u32 val, pend = 0;
+	u32 pkts = 0, pend = 0, toread, n;
 
 	/*
 	 * It is faster to read only one 16bit register. This is only possible
@@ -886,65 +930,26 @@ static int c_can_do_rx_poll(struct net_device *dev, int quota)
 			"Implementation does not support more message objects than 16");
 
 	while (quota > 0) {
-
 		if (!pend) {
 			pend = priv->read_reg(priv, C_CAN_INTPND1_REG);
 			if (!pend)
-				return num_rx_pkts;
+				break;
 			/*
 			 * If the pending field has a gap, handle the
 			 * bits above the gap first.
 			 */
-			val = c_can_adjust_pending(pend);
+			toread = c_can_adjust_pending(pend);
 		} else {
-			val = pend;
+			toread = pend;
 		}
 		/* Remove the bits from pend */
-		pend &= ~val;
-
-		while ((msg_obj = ffs(val)) && quota > 0) {
-			val &= ~BIT(msg_obj - 1);
-
-			c_can_object_get(dev, IF_RX, msg_obj, IF_COMM_ALL &
-					~IF_COMM_TXRQST);
-			msg_ctrl_save = priv->read_reg(priv,
-					C_CAN_IFACE(MSGCTRL_REG, IF_RX));
-
-			if (msg_ctrl_save & IF_MCONT_MSGLST) {
-				int n;
-
-				n = c_can_handle_lost_msg_obj(dev, IF_RX,
-							      msg_obj,
-							      msg_ctrl_save);
-				num_rx_pkts += n;
-				quota -=n;
-				continue;
-			}
-
-			if (!(msg_ctrl_save & IF_MCONT_NEWDAT))
-				continue;
-
-			/* read the data from the message object */
-			c_can_read_msg_object(dev, IF_RX, msg_ctrl_save);
-
-			if (msg_obj < C_CAN_MSG_RX_LOW_LAST)
-				c_can_mark_rx_msg_obj(dev, IF_RX,
-						msg_ctrl_save, msg_obj);
-			else if (msg_obj > C_CAN_MSG_RX_LOW_LAST)
-				/* activate this msg obj */
-				c_can_activate_rx_msg_obj(dev, IF_RX,
-						msg_ctrl_save, msg_obj);
-			else if (msg_obj == C_CAN_MSG_RX_LOW_LAST)
-				/* activate all lower message objects */
-				c_can_activate_all_lower_rx_msg_obj(dev,
-						IF_RX, msg_ctrl_save);
-
-			num_rx_pkts++;
-			quota--;
-		}
+		pend &= ~toread;
+		/* Read the objects */
+		n = c_can_read_objects(dev, priv, toread, quota);
+		pkts += n;
+		quota -= n;
 	}
-
-	return num_rx_pkts;
+	return pkts;
 }
 
 static inline int c_can_has_and_handle_berr(struct c_can_priv *priv)
-- 
cgit v1.2.2


From c0a9f4d396c9d3cf34d21e318a422f9461d93042 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Tue, 18 Mar 2014 17:19:13 +0000
Subject: can: c_can: Reduce register access

commit 4ce78a838c (can: c_can: Speed up rx_poll function) hyped a
performance improvement by reducing the access to the interrupt
pending register from a dual 16 bit to a single 16 bit access. Wow!

Thereby it crippled the driver to cast the 16 msg objects in stone,
which is completly braindead as contemporary hardware has up to 128
message objects. Supporting larger object buffers is a major surgery,
but it'd be definitely worth it especially as the driver does not
support HW message filtering ....

The logic of the "FIFO" implementation is to split the FIFO in half.

For the lower half we read the buffers and clear the interrupt pending
bit, but keep the newdat bit set, so the HW will queue above those
buffers.

When we read out the last low buffer then we reenable all the low half
buffers by clearing the newdat bit.

The upper half buffers clear the newdat and the interrupt pending bit
right away as we know that the lower half bits are clear and give us a
headstart against the hardware.

Now the implementation is:

    transfer_message_object()
    read_object_and_put_into_skb();

    if (obj < END_OF_LOW_BUF)
       clear_intpending(obj)
    else if (obj > END_OF_LOW_BUF)
       clear_intpending_and_newdat(obj)
    else if (obj == END_OF_LOW_BUF)
       clear_newdat_of_all_low_objects()

The hardware allows to avoid most of the mess simply because we can
tell the transfer_message_object() function to clear bits right away.

So we can be clever and do:

   if (obj <= END_OF_LOW_BUF)
      ctrl = TRANSFER_MSG | CLEAR_INTPND;
   else
      ctrl = TRANSFER_MSG | CLEAR_INTPND | CLEAR_NEWDAT;

    transfer_message_object(ctrl)
    read_object_and_put_into_skb();

    if (obj == END_OF_LOW_BUF)
       clear_newdat_of_all_low_objects()

So we save a complete control operation on all message objects except
the one which is the end of the low buffer. That's a few micro seconds
per object.

I'm not adding a boasting profile to that, simply because it's self
explaining.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[mkl: adjusted subject and commit message]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/c_can/c_can.c | 49 +++++++++++++------------------------------
 1 file changed, 15 insertions(+), 34 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
index bd7234eb42f4..8ea1379a398b 100644
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -114,6 +114,14 @@
 				IF_COMM_CONTROL | IF_COMM_TXRQST | \
 				IF_COMM_DATAA | IF_COMM_DATAB)
 
+/* For the low buffers we clear the interrupt bit, but keep newdat */
+#define IF_COMM_RCV_LOW		(IF_COMM_MASK | IF_COMM_ARB | \
+				 IF_COMM_CONTROL | IF_COMM_CLR_INT_PND | \
+				 IF_COMM_DATAA | IF_COMM_DATAB)
+
+/* For the high buffers we clear the interrupt bit and newdat */
+#define IF_COMM_RCV_HIGH	(IF_COMM_RCV_LOW | IF_COMM_TXRQST)
+
 /* IFx arbitration */
 #define IF_ARB_MSGVAL		BIT(15)
 #define IF_ARB_MSGXTD		BIT(14)
@@ -371,18 +379,6 @@ static void c_can_write_msg_object(struct net_device *dev,
 	c_can_object_put(dev, iface, objno, IF_COMM_ALL);
 }
 
-static inline void c_can_mark_rx_msg_obj(struct net_device *dev,
-						int iface, int ctrl_mask,
-						int obj)
-{
-	struct c_can_priv *priv = netdev_priv(dev);
-
-	priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface),
-			ctrl_mask & ~(IF_MCONT_MSGLST | IF_MCONT_INTPND));
-	c_can_object_put(dev, iface, obj, IF_COMM_CONTROL);
-
-}
-
 static inline void c_can_activate_all_lower_rx_msg_obj(struct net_device *dev,
 						int iface,
 						int ctrl_mask)
@@ -392,24 +388,11 @@ static inline void c_can_activate_all_lower_rx_msg_obj(struct net_device *dev,
 
 	for (i = C_CAN_MSG_OBJ_RX_FIRST; i <= C_CAN_MSG_RX_LOW_LAST; i++) {
 		priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface),
-				ctrl_mask & ~(IF_MCONT_MSGLST |
-					IF_MCONT_INTPND | IF_MCONT_NEWDAT));
+				ctrl_mask & ~IF_MCONT_NEWDAT);
 		c_can_object_put(dev, iface, i, IF_COMM_CONTROL);
 	}
 }
 
-static inline void c_can_activate_rx_msg_obj(struct net_device *dev,
-						int iface, int ctrl_mask,
-						int obj)
-{
-	struct c_can_priv *priv = netdev_priv(dev);
-
-	priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface),
-			ctrl_mask & ~(IF_MCONT_MSGLST |
-				IF_MCONT_INTPND | IF_MCONT_NEWDAT));
-	c_can_object_put(dev, iface, obj, IF_COMM_CONTROL);
-}
-
 static int c_can_handle_lost_msg_obj(struct net_device *dev,
 				     int iface, int objno, u32 ctrl)
 {
@@ -852,12 +835,15 @@ static u32 c_can_adjust_pending(u32 pend)
 static int c_can_read_objects(struct net_device *dev, struct c_can_priv *priv,
 			      u32 pend, int quota)
 {
-	u32 pkts = 0, ctrl, obj;
+	u32 pkts = 0, ctrl, obj, mcmd;
 
 	while ((obj = ffs(pend)) && quota > 0) {
 		pend &= ~BIT(obj - 1);
 
-		c_can_object_get(dev, IF_RX, obj, IF_COMM_ALL &	~IF_COMM_TXRQST);
+		mcmd = obj < C_CAN_MSG_RX_LOW_LAST ?
+			IF_COMM_RCV_LOW : IF_COMM_RCV_HIGH;
+
+		c_can_object_get(dev, IF_RX, obj, mcmd);
 		ctrl = priv->read_reg(priv, C_CAN_IFACE(MSGCTRL_REG, IF_RX));
 
 		if (ctrl & IF_MCONT_MSGLST) {
@@ -879,12 +865,7 @@ static int c_can_read_objects(struct net_device *dev, struct c_can_priv *priv,
 		/* read the data from the message object */
 		c_can_read_msg_object(dev, IF_RX, ctrl);
 
-		if (obj < C_CAN_MSG_RX_LOW_LAST)
-			c_can_mark_rx_msg_obj(dev, IF_RX, ctrl, obj);
-		else if (obj > C_CAN_MSG_RX_LOW_LAST)
-			/* activate this msg obj */
-			c_can_activate_rx_msg_obj(dev, IF_RX, ctrl, obj);
-		else if (obj == C_CAN_MSG_RX_LOW_LAST)
+		if (obj == C_CAN_MSG_RX_LOW_LAST)
 			/* activate all lower message objects */
 			c_can_activate_all_lower_rx_msg_obj(dev, IF_RX, ctrl);
 
-- 
cgit v1.2.2


From 902470085406934d3f20c4af02de7d79c01b6b93 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Tue, 18 Mar 2014 17:19:14 +0000
Subject: can: c_can: Store dlc private

We can avoid the HW access in TX cleanup path for retrieving the DLC
of the sent package if we store the DLC in a private array.

Ideally this should be handled in the can_echo_skb functions, but I
leave that exercise to the CAN folks.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/c_can/c_can.c | 28 +---------------------------
 drivers/net/can/c_can/c_can.h | 28 ++++++++++++++++++++++++++++
 2 files changed, 29 insertions(+), 27 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
index 8ea1379a398b..1e75223d614f 100644
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -145,33 +145,6 @@
 #define IF_RX			0
 #define IF_TX			1
 
-/*
- * IFx register masks:
- * allow easy operation on 16-bit registers when the
- * argument is 32-bit instead
- */
-#define IFX_WRITE_LOW_16BIT(x)	((x) & 0xFFFF)
-#define IFX_WRITE_HIGH_16BIT(x)	(((x) & 0xFFFF0000) >> 16)
-
-/* message object split */
-#define C_CAN_NO_OF_OBJECTS	32
-#define C_CAN_MSG_OBJ_RX_NUM	16
-#define C_CAN_MSG_OBJ_TX_NUM	16
-
-#define C_CAN_MSG_OBJ_RX_FIRST	1
-#define C_CAN_MSG_OBJ_RX_LAST	(C_CAN_MSG_OBJ_RX_FIRST + \
-				C_CAN_MSG_OBJ_RX_NUM - 1)
-
-#define C_CAN_MSG_OBJ_TX_FIRST	(C_CAN_MSG_OBJ_RX_LAST + 1)
-#define C_CAN_MSG_OBJ_TX_LAST	(C_CAN_MSG_OBJ_TX_FIRST + \
-				C_CAN_MSG_OBJ_TX_NUM - 1)
-
-#define C_CAN_MSG_OBJ_RX_SPLIT	9
-#define C_CAN_MSG_RX_LOW_LAST	(C_CAN_MSG_OBJ_RX_SPLIT - 1)
-
-#define C_CAN_NEXT_MSG_OBJ_MASK	(C_CAN_MSG_OBJ_TX_NUM - 1)
-#define RECEIVE_OBJECT_BITS	0x0000ffff
-
 /* status interrupt */
 #define STATUS_INTERRUPT	0x8000
 
@@ -537,6 +510,7 @@ static netdev_tx_t c_can_start_xmit(struct sk_buff *skb,
 
 	/* prepare message object for transmission */
 	c_can_write_msg_object(dev, IF_TX, frame, msg_obj_no);
+	priv->dlc[msg_obj_no - C_CAN_MSG_OBJ_TX_FIRST] = frame->can_dlc;
 	can_put_echo_skb(skb, dev, msg_obj_no - C_CAN_MSG_OBJ_TX_FIRST);
 
 	/*
diff --git a/drivers/net/can/c_can/c_can.h b/drivers/net/can/c_can/c_can.h
index 5097c802a61e..faa8404162b3 100644
--- a/drivers/net/can/c_can/c_can.h
+++ b/drivers/net/can/c_can/c_can.h
@@ -22,6 +22,33 @@
 #ifndef C_CAN_H
 #define C_CAN_H
 
+/*
+ * IFx register masks:
+ * allow easy operation on 16-bit registers when the
+ * argument is 32-bit instead
+ */
+#define IFX_WRITE_LOW_16BIT(x)	((x) & 0xFFFF)
+#define IFX_WRITE_HIGH_16BIT(x)	(((x) & 0xFFFF0000) >> 16)
+
+/* message object split */
+#define C_CAN_NO_OF_OBJECTS	32
+#define C_CAN_MSG_OBJ_RX_NUM	16
+#define C_CAN_MSG_OBJ_TX_NUM	16
+
+#define C_CAN_MSG_OBJ_RX_FIRST	1
+#define C_CAN_MSG_OBJ_RX_LAST	(C_CAN_MSG_OBJ_RX_FIRST + \
+				C_CAN_MSG_OBJ_RX_NUM - 1)
+
+#define C_CAN_MSG_OBJ_TX_FIRST	(C_CAN_MSG_OBJ_RX_LAST + 1)
+#define C_CAN_MSG_OBJ_TX_LAST	(C_CAN_MSG_OBJ_TX_FIRST + \
+				C_CAN_MSG_OBJ_TX_NUM - 1)
+
+#define C_CAN_MSG_OBJ_RX_SPLIT	9
+#define C_CAN_MSG_RX_LOW_LAST	(C_CAN_MSG_OBJ_RX_SPLIT - 1)
+
+#define C_CAN_NEXT_MSG_OBJ_MASK	(C_CAN_MSG_OBJ_TX_NUM - 1)
+#define RECEIVE_OBJECT_BITS	0x0000ffff
+
 enum reg {
 	C_CAN_CTRL_REG = 0,
 	C_CAN_CTRL_EX_REG,
@@ -173,6 +200,7 @@ struct c_can_priv {
 	u32 __iomem *raminit_ctrlreg;
 	unsigned int instance;
 	void (*raminit) (const struct c_can_priv *priv, bool enable);
+	u32 dlc[C_CAN_MSG_OBJ_TX_NUM];
 };
 
 struct net_device *alloc_c_can_dev(void);
-- 
cgit v1.2.2


From 5a7513adab521909e836fa5b9aaabbf22b48859f Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Tue, 18 Mar 2014 17:19:14 +0000
Subject: can: c_can: Simplify TX interrupt cleanup

The function loads the message object from the hardware to get the
payload length. The previous patch stores that information in an
array, so we can avoid the hardware access.

Remove the hardware access and move the led toggle outside of the
spinlocked region. Toggle the led only once when at least one packet
has been received.

Binary size shrinks along with the code

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/c_can/c_can.c | 37 +++++++++++++++++--------------------
 1 file changed, 17 insertions(+), 20 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
index 1e75223d614f..42c038d523c9 100644
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -232,10 +232,9 @@ static inline int get_tx_next_msg_obj(const struct c_can_priv *priv)
 			C_CAN_MSG_OBJ_TX_FIRST;
 }
 
-static inline int get_tx_echo_msg_obj(const struct c_can_priv *priv)
+static inline int get_tx_echo_msg_obj(int txecho)
 {
-	return (priv->tx_echo & C_CAN_NEXT_MSG_OBJ_MASK) +
-			C_CAN_MSG_OBJ_TX_FIRST;
+	return (txecho & C_CAN_NEXT_MSG_OBJ_MASK) + C_CAN_MSG_OBJ_TX_FIRST;
 }
 
 static u32 c_can_read_reg32(struct c_can_priv *priv, enum reg index)
@@ -729,8 +728,6 @@ static int c_can_get_berr_counter(const struct net_device *dev,
 }
 
 /*
- * theory of operation:
- *
  * priv->tx_echo holds the number of the oldest can_frame put for
  * transmission into the hardware, but not yet ACKed by the CAN tx
  * complete IRQ.
@@ -741,29 +738,23 @@ static int c_can_get_berr_counter(const struct net_device *dev,
  */
 static void c_can_do_tx(struct net_device *dev)
 {
-	u32 val;
-	u32 msg_obj_no;
 	struct c_can_priv *priv = netdev_priv(dev);
 	struct net_device_stats *stats = &dev->stats;
+	u32 val, obj, pkts = 0, bytes = 0;
 
 	spin_lock_bh(&priv->xmit_lock);
 
 	for (; (priv->tx_next - priv->tx_echo) > 0; priv->tx_echo++) {
-		msg_obj_no = get_tx_echo_msg_obj(priv);
+		obj = get_tx_echo_msg_obj(priv->tx_echo);
 		val = c_can_read_reg32(priv, C_CAN_TXRQST1_REG);
-		if (!(val & (1 << (msg_obj_no - 1)))) {
-			can_get_echo_skb(dev,
-					msg_obj_no - C_CAN_MSG_OBJ_TX_FIRST);
-			c_can_object_get(dev, IF_TX, msg_obj_no, IF_COMM_ALL);
-			stats->tx_bytes += priv->read_reg(priv,
-					C_CAN_IFACE(MSGCTRL_REG, IF_TX))
-					& IF_MCONT_DLC_MASK;
-			stats->tx_packets++;
-			can_led_event(dev, CAN_LED_EVENT_TX);
-			c_can_inval_msg_object(dev, IF_TX, msg_obj_no);
-		} else {
+
+		if (val & (1 << (obj - 1)))
 			break;
-		}
+
+		can_get_echo_skb(dev, obj - C_CAN_MSG_OBJ_TX_FIRST);
+		bytes += priv->dlc[obj - C_CAN_MSG_OBJ_TX_FIRST];
+		pkts++;
+		c_can_inval_msg_object(dev, IF_TX, obj);
 	}
 
 	/* restart queue if wrap-up or if queue stalled on last pkt */
@@ -772,6 +763,12 @@ static void c_can_do_tx(struct net_device *dev)
 		netif_wake_queue(dev);
 
 	spin_unlock_bh(&priv->xmit_lock);
+
+	if (pkts) {
+		stats->tx_bytes += bytes;
+		stats->tx_packets += pkts;
+		can_led_event(dev, CAN_LED_EVENT_TX);
+	}
 }
 
 /*
-- 
cgit v1.2.2


From b1d8e431bd5639c03ff99d08fd2d5d621969bdc5 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Tue, 18 Mar 2014 17:19:15 +0000
Subject: can: c_can: Avoid led toggling for every packet.

There is no point to toggle the RX led for every packet. Especially if
we have a full FIFO we want to avoid everything we can.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/c_can/c_can.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
index 42c038d523c9..01dc4941e3d0 100644
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -433,9 +433,6 @@ static int c_can_read_msg_object(struct net_device *dev, int iface, int ctrl)
 
 	stats->rx_packets++;
 	stats->rx_bytes += frame->can_dlc;
-
-	can_led_event(dev, CAN_LED_EVENT_RX);
-
 	return 0;
 }
 
@@ -901,6 +898,10 @@ static int c_can_do_rx_poll(struct net_device *dev, int quota)
 		pkts += n;
 		quota -= n;
 	}
+
+	if (pkts)
+		can_led_event(dev, CAN_LED_EVENT_RX);
+
 	return pkts;
 }
 
-- 
cgit v1.2.2


From c5abe7c0a44ac2e8147543203de48b4aa0d4eaec Mon Sep 17 00:00:00 2001
From: Sathya Perla <sathya.perla@emulex.com>
Date: Tue, 1 Apr 2014 12:33:59 +0530
Subject: be2net: fix build dependency on VxLAN

Introduce a CONFIG_BE2NET_VXLAN define to control be2net's build
dependency on the VXLAN driver.

Without this fix, the kernel build fails when VxLAN driver is
selected to be built as a module while be2net is built-in.

fixes: c9c47142 ("be2net: csum, tso and rss steering offload support for VxLAN")

Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/emulex/benet/Kconfig   |  8 ++++++++
 drivers/net/ethernet/emulex/benet/be_main.c | 12 +++++++++++-
 2 files changed, 19 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/emulex/benet/Kconfig b/drivers/net/ethernet/emulex/benet/Kconfig
index 231129dd1764..ea94a8eb6b35 100644
--- a/drivers/net/ethernet/emulex/benet/Kconfig
+++ b/drivers/net/ethernet/emulex/benet/Kconfig
@@ -4,3 +4,11 @@ config BE2NET
 	---help---
 	  This driver implements the NIC functionality for ServerEngines'
 	  10Gbps network adapter - BladeEngine.
+
+config BE2NET_VXLAN
+        bool "VXLAN offload support on be2net driver"
+        default y
+        depends on BE2NET && VXLAN && !(BE2NET=y && VXLAN=m)
+        ---help---
+	  Say Y here if you want to enable VXLAN offload support on
+	  be2net driver.
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index c89dc85ad8d6..3e6df47b6973 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -2862,8 +2862,11 @@ static int be_open(struct net_device *netdev)
 	netif_tx_start_all_queues(netdev);
 	be_roce_dev_open(adapter);
 
+#ifdef CONFIG_BE2NET_VXLAN
 	if (skyhawk_chip(adapter))
 		vxlan_get_rx_port(netdev);
+#endif
+
 	return 0;
 err:
 	be_close(adapter->netdev);
@@ -3019,6 +3022,7 @@ static void be_mac_clear(struct be_adapter *adapter)
 	}
 }
 
+#ifdef CONFIG_BE2NET_VXLAN
 static void be_disable_vxlan_offloads(struct be_adapter *adapter)
 {
 	if (adapter->flags & BE_FLAGS_VXLAN_OFFLOADS)
@@ -3031,6 +3035,7 @@ static void be_disable_vxlan_offloads(struct be_adapter *adapter)
 	adapter->flags &= ~BE_FLAGS_VXLAN_OFFLOADS;
 	adapter->vxlan_port = 0;
 }
+#endif
 
 static int be_clear(struct be_adapter *adapter)
 {
@@ -3039,8 +3044,9 @@ static int be_clear(struct be_adapter *adapter)
 	if (sriov_enabled(adapter))
 		be_vf_clear(adapter);
 
+#ifdef CONFIG_BE2NET_VXLAN
 	be_disable_vxlan_offloads(adapter);
-
+#endif
 	/* delete the primary mac along with the uc-mac list */
 	be_mac_clear(adapter);
 
@@ -4165,6 +4171,7 @@ static int be_ndo_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq,
 				       BRIDGE_MODE_VEPA : BRIDGE_MODE_VEB);
 }
 
+#ifdef CONFIG_BE2NET_VXLAN
 static void be_add_vxlan_port(struct net_device *netdev, sa_family_t sa_family,
 			      __be16 port)
 {
@@ -4223,6 +4230,7 @@ static void be_del_vxlan_port(struct net_device *netdev, sa_family_t sa_family,
 		 "Disabled VxLAN offloads for UDP port %d\n",
 		 be16_to_cpu(port));
 }
+#endif
 
 static const struct net_device_ops be_netdev_ops = {
 	.ndo_open		= be_open,
@@ -4248,8 +4256,10 @@ static const struct net_device_ops be_netdev_ops = {
 #ifdef CONFIG_NET_RX_BUSY_POLL
 	.ndo_busy_poll		= be_busy_poll,
 #endif
+#ifdef CONFIG_BE2NET_VXLAN
 	.ndo_add_vxlan_port	= be_add_vxlan_port,
 	.ndo_del_vxlan_port	= be_del_vxlan_port,
+#endif
 };
 
 static void be_netdev_init(struct net_device *netdev)
-- 
cgit v1.2.2


From a66132f3eb514f42c49a3e8f57aab2ccd0360f06 Mon Sep 17 00:00:00 2001
From: Or Gerlitz <ogerlitz@mellanox.com>
Date: Tue, 1 Apr 2014 11:27:13 +0300
Subject: net/mlx4: Set proper build dependancy with vxlan

Make sure that vxlan_get_rx_port() is present in the kernel build in a manner
consistent with mlx4, else mlx4 can be made built-in where vxlan a module and
the phase of the build linking fails. Add CONFIG_MLX4_EN_VXLAN for that.

Also, #ifdef the advertizement and implementation of the mlx4 vxlan ndo
calls and related code under this config directive.

Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/mellanox/mlx4/Kconfig     | 7 +++++++
 drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 8 ++++++++
 drivers/net/ethernet/mellanox/mlx4/mlx4_en.h   | 2 ++
 3 files changed, 17 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/mellanox/mlx4/Kconfig b/drivers/net/ethernet/mellanox/mlx4/Kconfig
index 1a6e1887a171..1486ce902a56 100644
--- a/drivers/net/ethernet/mellanox/mlx4/Kconfig
+++ b/drivers/net/ethernet/mellanox/mlx4/Kconfig
@@ -23,6 +23,13 @@ config MLX4_EN_DCB
 
 	  If unsure, set to Y
 
+config MLX4_EN_VXLAN
+	bool "VXLAN offloads Support"
+	default y
+	depends on MLX4_EN && VXLAN && !(MLX4_EN=y && VXLAN=m)
+	---help---
+	  Say Y here if you want to use VXLAN offloads in the driver.
+
 config MLX4_CORE
 	tristate
 	depends on PCI
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
index 82d7eb5b79cc..f085c2df5e69 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
@@ -1698,8 +1698,10 @@ int mlx4_en_start_port(struct net_device *dev)
 
 	mlx4_set_stats_bitmap(mdev->dev, &priv->stats_bitmap);
 
+#ifdef CONFIG_MLX4_EN_VXLAN
 	if (priv->mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_VXLAN_OFFLOADS)
 		vxlan_get_rx_port(dev);
+#endif
 	priv->port_up = true;
 	netif_tx_start_all_queues(dev);
 	netif_device_attach(dev);
@@ -2267,6 +2269,7 @@ static int mlx4_en_get_phys_port_id(struct net_device *dev,
 	return 0;
 }
 
+#ifdef CONFIG_MLX4_EN_VXLAN
 static void mlx4_en_add_vxlan_offloads(struct work_struct *work)
 {
 	int ret;
@@ -2341,6 +2344,7 @@ static void mlx4_en_del_vxlan_port(struct  net_device *dev,
 
 	queue_work(priv->mdev->workqueue, &priv->vxlan_del_task);
 }
+#endif
 
 static const struct net_device_ops mlx4_netdev_ops = {
 	.ndo_open		= mlx4_en_open,
@@ -2368,8 +2372,10 @@ static const struct net_device_ops mlx4_netdev_ops = {
 	.ndo_busy_poll		= mlx4_en_low_latency_recv,
 #endif
 	.ndo_get_phys_port_id	= mlx4_en_get_phys_port_id,
+#ifdef CONFIG_MLX4_EN_VXLAN
 	.ndo_add_vxlan_port	= mlx4_en_add_vxlan_port,
 	.ndo_del_vxlan_port	= mlx4_en_del_vxlan_port,
+#endif
 };
 
 static const struct net_device_ops mlx4_netdev_ops_master = {
@@ -2461,8 +2467,10 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
 	INIT_WORK(&priv->linkstate_task, mlx4_en_linkstate);
 	INIT_DELAYED_WORK(&priv->stats_task, mlx4_en_do_get_stats);
 	INIT_DELAYED_WORK(&priv->service_task, mlx4_en_service_task);
+#ifdef CONFIG_MLX4_EN_VXLAN
 	INIT_WORK(&priv->vxlan_add_task, mlx4_en_add_vxlan_offloads);
 	INIT_WORK(&priv->vxlan_del_task, mlx4_en_del_vxlan_offloads);
+#endif
 #ifdef CONFIG_MLX4_EN_DCB
 	if (!mlx4_is_slave(priv->mdev->dev)) {
 		if (mdev->dev->caps.flags & MLX4_DEV_CAP_FLAG_SET_ETH_SCHED) {
diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
index 36fc2a2b24c3..7a733c287744 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
@@ -559,8 +559,10 @@ struct mlx4_en_priv {
 	struct work_struct linkstate_task;
 	struct delayed_work stats_task;
 	struct delayed_work service_task;
+#ifdef CONFIG_MLX4_EN_VXLAN
 	struct work_struct vxlan_add_task;
 	struct work_struct vxlan_del_task;
+#endif
 	struct mlx4_en_perf_stats pstats;
 	struct mlx4_en_pkt_stats pkstats;
 	struct mlx4_en_port_stats port_stats;
-- 
cgit v1.2.2


From e9d8b2c2968499c1f96563e6522c56958d5a1d0d Mon Sep 17 00:00:00 2001
From: Wei Liu <wei.liu2@citrix.com>
Date: Tue, 1 Apr 2014 12:46:12 +0100
Subject: xen-netback: disable rogue vif in kthread context
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

When netback discovers frontend is sending malformed packet it will
disables the interface which serves that frontend.

However disabling a network interface involving taking a mutex which
cannot be done in softirq context, so we need to defer this process to
kthread context.

This patch does the following:
1. introduce a flag to indicate the interface is disabled.
2. check that flag in TX path, don't do any work if it's true.
3. check that flag in RX path, turn off that interface if it's true.

The reason to disable it in RX path is because RX uses kthread. After
this change the behavior of netback is still consistent -- it won't do
any TX work for a rogue frontend, and the interface will be eventually
turned off.

Also change a "continue" to "break" after xenvif_fatal_tx_err, as it
doesn't make sense to continue processing packets if frontend is rogue.

This is a fix for XSA-90.

Reported-by: Török Edwin <edwin@etorok.net>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/xen-netback/common.h    |  5 +++++
 drivers/net/xen-netback/interface.c | 11 +++++++++++
 drivers/net/xen-netback/netback.c   | 16 ++++++++++++++--
 3 files changed, 30 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/xen-netback/common.h b/drivers/net/xen-netback/common.h
index 89b2d429c440..89d1d0556b6e 100644
--- a/drivers/net/xen-netback/common.h
+++ b/drivers/net/xen-netback/common.h
@@ -104,6 +104,11 @@ struct xenvif {
 	domid_t          domid;
 	unsigned int     handle;
 
+	/* Is this interface disabled? True when backend discovers
+	 * frontend is rogue.
+	 */
+	bool disabled;
+
 	/* Use NAPI for guest TX */
 	struct napi_struct napi;
 	/* When feature-split-event-channels = 0, tx_irq = rx_irq. */
diff --git a/drivers/net/xen-netback/interface.c b/drivers/net/xen-netback/interface.c
index cdc298e3b747..ef05c5c49d41 100644
--- a/drivers/net/xen-netback/interface.c
+++ b/drivers/net/xen-netback/interface.c
@@ -63,6 +63,15 @@ static int xenvif_poll(struct napi_struct *napi, int budget)
 	struct xenvif *vif = container_of(napi, struct xenvif, napi);
 	int work_done;
 
+	/* This vif is rogue, we pretend we've there is nothing to do
+	 * for this vif to deschedule it from NAPI. But this interface
+	 * will be turned off in thread context later.
+	 */
+	if (unlikely(vif->disabled)) {
+		napi_complete(napi);
+		return 0;
+	}
+
 	work_done = xenvif_tx_action(vif, budget);
 
 	if (work_done < budget) {
@@ -363,6 +372,8 @@ struct xenvif *xenvif_alloc(struct device *parent, domid_t domid,
 	vif->ip_csum = 1;
 	vif->dev = dev;
 
+	vif->disabled = false;
+
 	vif->credit_bytes = vif->remaining_credit = ~0UL;
 	vif->credit_usec  = 0UL;
 	init_timer(&vif->credit_timeout);
diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c
index ae34f5fc7fbc..3f021e054ba1 100644
--- a/drivers/net/xen-netback/netback.c
+++ b/drivers/net/xen-netback/netback.c
@@ -711,7 +711,8 @@ static void xenvif_tx_err(struct xenvif *vif,
 static void xenvif_fatal_tx_err(struct xenvif *vif)
 {
 	netdev_err(vif->dev, "fatal error; disabling device\n");
-	xenvif_carrier_off(vif);
+	vif->disabled = true;
+	xenvif_kick_thread(vif);
 }
 
 static int xenvif_count_requests(struct xenvif *vif,
@@ -1212,7 +1213,7 @@ static unsigned xenvif_tx_build_gops(struct xenvif *vif, int budget)
 				   vif->tx.sring->req_prod, vif->tx.req_cons,
 				   XEN_NETIF_TX_RING_SIZE);
 			xenvif_fatal_tx_err(vif);
-			continue;
+			break;
 		}
 
 		work_to_do = RING_HAS_UNCONSUMED_REQUESTS(&vif->tx);
@@ -1808,7 +1809,18 @@ int xenvif_kthread_guest_rx(void *data)
 	while (!kthread_should_stop()) {
 		wait_event_interruptible(vif->wq,
 					 rx_work_todo(vif) ||
+					 vif->disabled ||
 					 kthread_should_stop());
+
+		/* This frontend is found to be rogue, disable it in
+		 * kthread context. Currently this is only set when
+		 * netback finds out frontend sends malformed packet,
+		 * but we cannot disable the interface in softirq
+		 * context so we defer it here.
+		 */
+		if (unlikely(vif->disabled && netif_carrier_ok(vif->dev)))
+			xenvif_carrier_off(vif);
+
 		if (kthread_should_stop())
 			break;
 
-- 
cgit v1.2.2


From 52ad762b85ed7947ec9eff6b036eb985352f6874 Mon Sep 17 00:00:00 2001
From: Daniel Pieczko <dpieczko@solarflare.com>
Date: Tue, 1 Apr 2014 13:10:34 +0100
Subject: Call efx_set_channels() before efx->type->dimension_resources()

When using the "separate_tx_channels=1" module parameter, the TX queues are
initially numbered starting from the first TX-only channel number (after all the
RX-only channels).  efx_set_channels() renumbers the queues so that they are
indexed from zero.

On EF10, the TX queues need to be relabelled in this way before calling the
dimension_resources NIC type operation, otherwise the TX queue PIO buffers can be
linked to the wrong VIs when using "separate_tx_channels=1".

Added comments to explain UC/WC mappings for PIO buffers

Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/sfc/ef10.c | 7 +++++++
 drivers/net/ethernet/sfc/efx.c  | 3 ++-
 2 files changed, 9 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/sfc/ef10.c b/drivers/net/ethernet/sfc/ef10.c
index 651626e133f9..21c20ea0dad0 100644
--- a/drivers/net/ethernet/sfc/ef10.c
+++ b/drivers/net/ethernet/sfc/ef10.c
@@ -565,10 +565,17 @@ static int efx_ef10_dimension_resources(struct efx_nic *efx)
 	 * several of each (in fact that's the only option if host
 	 * page size is >4K).  So we may allocate some extra VIs just
 	 * for writing PIO buffers through.
+	 *
+	 * The UC mapping contains (min_vis - 1) complete VIs and the
+	 * first half of the next VI.  Then the WC mapping begins with
+	 * the second half of this last VI.
 	 */
 	uc_mem_map_size = PAGE_ALIGN((min_vis - 1) * EFX_VI_PAGE_SIZE +
 				     ER_DZ_TX_PIOBUF);
 	if (nic_data->n_piobufs) {
+		/* pio_write_vi_base rounds down to give the number of complete
+		 * VIs inside the UC mapping.
+		 */
 		pio_write_vi_base = uc_mem_map_size / EFX_VI_PAGE_SIZE;
 		wc_mem_map_size = (PAGE_ALIGN((pio_write_vi_base +
 					       nic_data->n_piobufs) *
diff --git a/drivers/net/ethernet/sfc/efx.c b/drivers/net/ethernet/sfc/efx.c
index 52589f6a8beb..57b971e5e6b2 100644
--- a/drivers/net/ethernet/sfc/efx.c
+++ b/drivers/net/ethernet/sfc/efx.c
@@ -1599,6 +1599,8 @@ static int efx_probe_nic(struct efx_nic *efx)
 	if (rc)
 		goto fail1;
 
+	efx_set_channels(efx);
+
 	rc = efx->type->dimension_resources(efx);
 	if (rc)
 		goto fail2;
@@ -1609,7 +1611,6 @@ static int efx_probe_nic(struct efx_nic *efx)
 		efx->rx_indir_table[i] =
 			ethtool_rxfh_indir_default(i, efx->rss_spread);
 
-	efx_set_channels(efx);
 	netif_set_real_num_tx_queues(efx->net_dev, efx->n_tx_channels);
 	netif_set_real_num_rx_queues(efx->net_dev, efx->n_rx_channels);
 
-- 
cgit v1.2.2


From ca231f838870e9c83aaf2c0eff136150cd97b412 Mon Sep 17 00:00:00 2001
From: Dan Carpenter <dan.carpenter@oracle.com>
Date: Tue, 1 Apr 2014 16:38:44 +0300
Subject: net: sxgbe: sxgbe_mdio_register() frees the bus

"err" is always zero at this point so we always unregister and free the
mdio_bus before returning success.  This seems like left over code and
I have deleted it.

Fixes: 1edb9ca69e8a ('net: sxgbe: add basic framework for Samsung 10Gb ethernet driver')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/samsung/sxgbe/sxgbe_mdio.c | 7 -------
 1 file changed, 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_mdio.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_mdio.c
index b0eb0a2c52ca..01af2cbb479d 100644
--- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_mdio.c
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_mdio.c
@@ -219,13 +219,6 @@ int sxgbe_mdio_register(struct net_device *ndev)
 		}
 	}
 
-	if (!err) {
-		netdev_err(ndev, "PHY not found\n");
-		mdiobus_unregister(mdio_bus);
-		mdiobus_free(mdio_bus);
-		goto mdiobus_err;
-	}
-
 	priv->mii = mdio_bus;
 
 	return 0;
-- 
cgit v1.2.2


From 4f6ed914f81e55be16bfec0b2e86873ead35a26d Mon Sep 17 00:00:00 2001
From: Dan Carpenter <dan.carpenter@oracle.com>
Date: Tue, 1 Apr 2014 16:39:00 +0300
Subject: net: sxgbe: fix logical vs bitwise operation

Bitwise '|' was intended here instead of logical '||'.

Fixes: 1edb9ca69e8a ('net: sxgbe: add basic framework for Samsung 10Gb ethernet driver')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/samsung/sxgbe/sxgbe_core.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_core.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_core.c
index 66d4a74a137c..2e11da00dac2 100644
--- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_core.c
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_core.c
@@ -93,9 +93,9 @@ static void sxgbe_core_set_umac_addr(void __iomem *ioaddr, unsigned char *addr,
 {
 	u32 high_word, low_word;
 
-	high_word = (addr[5] << 8) || (addr[4]);
-	low_word = ((addr[3] << 24) || (addr[2] << 16) ||
-		    (addr[1] << 8) || (addr[0]));
+	high_word = (addr[5] << 8) | (addr[4]);
+	low_word = (addr[3] << 24) | (addr[2] << 16) |
+		   (addr[1] << 8) | (addr[0]);
 	writel(high_word, ioaddr + SXGBE_CORE_ADD_HIGHOFFSET(reg_n));
 	writel(low_word, ioaddr + SXGBE_CORE_ADD_LOWOFFSET(reg_n));
 }
-- 
cgit v1.2.2


From 7baea6efb4b716db7d49c3a6815305dfe6afb888 Mon Sep 17 00:00:00 2001
From: Dan Carpenter <dan.carpenter@oracle.com>
Date: Tue, 1 Apr 2014 16:39:18 +0300
Subject: net: sxgbe: make "core_ops" static

The "core_ops" variable isn't referenced outside this file and Sparse
complains about it:

	drivers/net/ethernet/samsung/sxgbe/sxgbe_core.c:239:29: warning:
	symbol 'core_ops' was not declared. Should it be static?

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/samsung/sxgbe/sxgbe_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_core.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_core.c
index 2e11da00dac2..c4da7a2b002a 100644
--- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_core.c
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_core.c
@@ -236,7 +236,7 @@ static void sxgbe_disable_rx_csum(void __iomem *ioaddr)
 	writel(ctrl, ioaddr + SXGBE_CORE_RX_CONFIG_REG);
 }
 
-const struct sxgbe_core_ops core_ops = {
+static const struct sxgbe_core_ops core_ops = {
 	.core_init		= sxgbe_core_init,
 	.dump_regs		= sxgbe_core_dump_regs,
 	.host_irq_status	= sxgbe_core_host_irq_status,
-- 
cgit v1.2.2


From 408eccce32044ee3285a7f6a812723ba3540c3e7 Mon Sep 17 00:00:00 2001
From: Daniel Borkmann <dborkman@redhat.com>
Date: Tue, 1 Apr 2014 16:20:23 +0200
Subject: net: ptp: move PTP classifier in its own file

This commit fixes a build error reported by Fengguang, that is
triggered when CONFIG_NETWORK_PHY_TIMESTAMPING is not set:

  ERROR: "ptp_classify_raw" [drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.ko] undefined!

The fix is to introduce its own file for the PTP BPF classifier,
so that PTP_1588_CLOCK and/or NETWORK_PHY_TIMESTAMPING can select
it independently from each other. IXP4xx driver on ARM needs to
select it as well since it does not seem to select PTP_1588_CLOCK
or similar that would pull it in automatically.

This also allows for hiding all of the internals of the BPF PTP
program inside that file, and only exporting relevant API bits
to drivers.

This patch also adds a kdoc documentation of ptp_classify_raw()
API to make it clear that it can return PTP_CLASS_* defines. Also,
the BPF program has been translated into bpf_asm code, so that it
can be more easily read and altered (extensively documented in [1]).

In the kernel tree under tools/net/ we have bpf_asm and bpf_dbg
tools, so the commented program can simply be translated via
`./bpf_asm -c prog` where prog is a file that contains the
commented code. This makes it easily readable/verifiable and when
there's a need to change something, jump offsets etc do not need
to be replaced manually which can be very error prone. Instead,
a newly translated version via bpf_asm can simply replace the old
code. I have checked opcode diffs before/after and it's the very
same filter.

  [1] Documentation/networking/filter.txt

Fixes: 164d8c666521 ("net: ptp: do not reimplement PTP/BPF classifier")
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Jiri Benc <jbenc@redhat.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/xscale/Kconfig | 1 +
 drivers/net/phy/dp83640.c           | 1 +
 2 files changed, 2 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/xscale/Kconfig b/drivers/net/ethernet/xscale/Kconfig
index 3f431019e615..b81bc9fca378 100644
--- a/drivers/net/ethernet/xscale/Kconfig
+++ b/drivers/net/ethernet/xscale/Kconfig
@@ -23,6 +23,7 @@ config IXP4XX_ETH
 	tristate "Intel IXP4xx Ethernet support"
 	depends on ARM && ARCH_IXP4XX && IXP4XX_NPE && IXP4XX_QMGR
 	select PHYLIB
+	select NET_PTP_CLASSIFY
 	---help---
 	  Say Y here if you want to use built-in Ethernet ports
 	  on IXP4xx processor.
diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c
index 352c5e45fe9c..6a999e6814a0 100644
--- a/drivers/net/phy/dp83640.c
+++ b/drivers/net/phy/dp83640.c
@@ -27,6 +27,7 @@
 #include <linux/module.h>
 #include <linux/net_tstamp.h>
 #include <linux/netdevice.h>
+#include <linux/if_vlan.h>
 #include <linux/phy.h>
 #include <linux/ptp_classify.h>
 #include <linux/ptp_clock_kernel.h>
-- 
cgit v1.2.2


From 7f1f6056f2f7293d5108eda905af42df58b78370 Mon Sep 17 00:00:00 2001
From: Shahed Shaikh <shahed.shaikh@qlogic.com>
Date: Tue, 1 Apr 2014 16:29:32 -0400
Subject: qlcnic: Fix build failure due to undefined reference to
 `vxlan_get_rx_port'

Commit 2b3d7b758c687("qlcnic: Add VXLAN Rx offload support") uses
vxlan_get_rx_port() which caused build failure when VXLAN=m.

This patch fixes the build failure by adding dependency on VXLAN
in Kconfig of qlcnic module and use vxlan_get_rx_port() and support
code accordingly.

Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/qlogic/Kconfig                   | 10 ++++++++++
 drivers/net/ethernet/qlogic/qlcnic/qlcnic.h           |  3 +++
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c |  8 +++++---
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c      |  8 ++++++++
 4 files changed, 26 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/qlogic/Kconfig b/drivers/net/ethernet/qlogic/Kconfig
index f59e6be4a66e..c14bd3116e45 100644
--- a/drivers/net/ethernet/qlogic/Kconfig
+++ b/drivers/net/ethernet/qlogic/Kconfig
@@ -56,6 +56,16 @@ config QLCNIC_DCB
 	  mode of DCB is supported. PG and PFC values are related only
 	  to Tx.
 
+config QLCNIC_VXLAN
+	bool "Virtual eXtensible Local Area Network (VXLAN) offload support"
+	default n
+	depends on QLCNIC && VXLAN && !(QLCNIC=y && VXLAN=m)
+	---help---
+	  This enables hardware offload support for VXLAN protocol over QLogic's
+	  84XX series adapters.
+	  Say Y here if you want to enable hardware offload support for
+	  Virtual eXtensible Local Area Network (VXLAN) in the driver.
+
 config QLGE
 	tristate "QLogic QLGE 10Gb Ethernet Driver Support"
 	depends on PCI
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
index b9039b569beb..f31bb5e9d8a9 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
@@ -1011,8 +1011,11 @@ struct qlcnic_ipaddr {
 #define QLCNIC_APP_CHANGED_FLAGS	0x20000
 #define QLCNIC_HAS_PHYS_PORT_ID		0x40000
 #define QLCNIC_TSS_RSS			0x80000
+
+#ifdef CONFIG_QLCNIC_VXLAN
 #define QLCNIC_ADD_VXLAN_PORT		0x100000
 #define QLCNIC_DEL_VXLAN_PORT		0x200000
+#endif
 
 #define QLCNIC_IS_MSI_FAMILY(adapter) \
 	((adapter)->flags & (QLCNIC_MSI_ENABLED | QLCNIC_MSIX_ENABLED))
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
index 2d91975d21f7..b48737dcd3c5 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
@@ -1020,6 +1020,7 @@ static int qlcnic_83xx_idc_check_state_validity(struct qlcnic_adapter *adapter,
 	return 0;
 }
 
+#ifdef CONFIG_QLCNIC_VXLAN
 #define QLC_83XX_ENCAP_TYPE_VXLAN	BIT_1
 #define QLC_83XX_MATCH_ENCAP_ID		BIT_2
 #define QLC_83XX_SET_VXLAN_UDP_DPORT	BIT_3
@@ -1088,14 +1089,14 @@ static int qlcnic_set_vxlan_parsing(struct qlcnic_adapter *adapter,
 
 	return ret;
 }
+#endif
 
 static void qlcnic_83xx_periodic_tasks(struct qlcnic_adapter *adapter)
 {
-	struct qlcnic_hardware_context *ahw = adapter->ahw;
-
 	if (adapter->fhash.fnum)
 		qlcnic_prune_lb_filters(adapter);
 
+#ifdef CONFIG_QLCNIC_VXLAN
 	if (adapter->flags & QLCNIC_ADD_VXLAN_PORT) {
 		if (qlcnic_set_vxlan_port(adapter))
 			return;
@@ -1108,9 +1109,10 @@ static void qlcnic_83xx_periodic_tasks(struct qlcnic_adapter *adapter)
 		if (qlcnic_set_vxlan_parsing(adapter, false))
 			return;
 
-		ahw->vxlan_port = 0;
+		adapter->ahw->vxlan_port = 0;
 		adapter->flags &= ~QLCNIC_DEL_VXLAN_PORT;
 	}
+#endif
 }
 
 /**
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
index 79be451a3ffc..309d05640883 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
@@ -21,7 +21,9 @@
 #include <linux/aer.h>
 #include <linux/log2.h>
 #include <linux/pci.h>
+#ifdef CONFIG_QLCNIC_VXLAN
 #include <net/vxlan.h>
+#endif
 
 MODULE_DESCRIPTION("QLogic 1/10 GbE Converged/Intelligent Ethernet Driver");
 MODULE_LICENSE("GPL");
@@ -462,6 +464,7 @@ static int qlcnic_get_phys_port_id(struct net_device *netdev,
 	return 0;
 }
 
+#ifdef CONFIG_QLCNIC_VXLAN
 static void qlcnic_add_vxlan_port(struct net_device *netdev,
 				  sa_family_t sa_family, __be16 port)
 {
@@ -490,6 +493,7 @@ static void qlcnic_del_vxlan_port(struct net_device *netdev,
 
 	adapter->flags |= QLCNIC_DEL_VXLAN_PORT;
 }
+#endif
 
 static const struct net_device_ops qlcnic_netdev_ops = {
 	.ndo_open	   = qlcnic_open,
@@ -509,8 +513,10 @@ static const struct net_device_ops qlcnic_netdev_ops = {
 	.ndo_fdb_del		= qlcnic_fdb_del,
 	.ndo_fdb_dump		= qlcnic_fdb_dump,
 	.ndo_get_phys_port_id	= qlcnic_get_phys_port_id,
+#ifdef CONFIG_QLCNIC_VXLAN
 	.ndo_add_vxlan_port	= qlcnic_add_vxlan_port,
 	.ndo_del_vxlan_port	= qlcnic_del_vxlan_port,
+#endif
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller = qlcnic_poll_controller,
 #endif
@@ -1975,8 +1981,10 @@ qlcnic_attach(struct qlcnic_adapter *adapter)
 
 	qlcnic_create_sysfs_entries(adapter);
 
+#ifdef CONFIG_QLCNIC_VXLAN
 	if (qlcnic_encap_rx_offload(adapter))
 		vxlan_get_rx_port(netdev);
+#endif
 
 	adapter->is_up = QLCNIC_ADAPTER_UP_MAGIC;
 	return 0;
-- 
cgit v1.2.2