From 6f258910733a8dbde368acc2ede4b8184ff0e09a Mon Sep 17 00:00:00 2001 From: Florin Malita Date: Sun, 4 Jun 2006 02:51:26 -0700 Subject: [PATCH] nmclan_cs: dereferencing skb after netif_rx() From: Florin Malita The skb may be gone after netif_rx(), we can't use 'skb->len' to update the stats. 'pkt_len' should work instead. Coverity CID: 911. Signed-off-by: Florin Malita Cc: Dominik Brodowski Acked-by: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/net/pcmcia/nmclan_cs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c index 4260c2128f47..a8f6bfc96fd2 100644 --- a/drivers/net/pcmcia/nmclan_cs.c +++ b/drivers/net/pcmcia/nmclan_cs.c @@ -1204,7 +1204,7 @@ static int mace_rx(struct net_device *dev, unsigned char RxCnt) dev->last_rx = jiffies; lp->linux_stats.rx_packets++; - lp->linux_stats.rx_bytes += skb->len; + lp->linux_stats.rx_bytes += pkt_len; outb(0xFF, ioaddr + AM2150_RCV_NEXT); /* skip to next frame */ continue; } else { -- cgit v1.2.2 From 0674d594ad8e0856243536c0bcc22e4583554bfb Mon Sep 17 00:00:00 2001 From: Zachary Amsden Date: Sun, 4 Jun 2006 02:51:38 -0700 Subject: [PATCH] Implement get / set tso for forcedeth driver From: Zachary Amsden Signed-off-by: Zachary Amsden Cc: Ayaz Abdulla Cc: Manfred Spraul Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/net/forcedeth.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 705e1229d89d..feb5b223cd60 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -2615,6 +2615,18 @@ static int nv_nway_reset(struct net_device *dev) return ret; } +#ifdef NETIF_F_TSO +static int nv_set_tso(struct net_device *dev, u32 value) +{ + struct fe_priv *np = netdev_priv(dev); + + if ((np->driver_data & DEV_HAS_CHECKSUM)) + return ethtool_op_set_tso(dev, value); + else + return value ? -EOPNOTSUPP : 0; +} +#endif + static struct ethtool_ops ops = { .get_drvinfo = nv_get_drvinfo, .get_link = ethtool_op_get_link, @@ -2626,6 +2638,10 @@ static struct ethtool_ops ops = { .get_regs = nv_get_regs, .nway_reset = nv_nway_reset, .get_perm_addr = ethtool_op_get_perm_addr, +#ifdef NETIF_F_TSO + .get_tso = ethtool_op_get_tso, + .set_tso = nv_set_tso +#endif }; static void nv_vlan_rx_register(struct net_device *dev, struct vlan_group *grp) -- cgit v1.2.2 From 92cd6eeea62e235fcb6634d87d1572c3da59f088 Mon Sep 17 00:00:00 2001 From: Matt Mackall Date: Mon, 5 Jun 2006 15:04:37 -0700 Subject: [NETCONSOLE]: Clean up initcall warning. From: Matt Mackall netconsole is being wrong here. If it wasn't enabled there's no error. Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/net/netconsole.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c index 66e74f740261..bf58db29e2ed 100644 --- a/drivers/net/netconsole.c +++ b/drivers/net/netconsole.c @@ -107,7 +107,7 @@ static int init_netconsole(void) if(!configured) { printk("netconsole: not configured, aborting\n"); - return -EINVAL; + return 0; } if(netpoll_setup(&np)) -- cgit v1.2.2 From 9bc18091a5e44a368827f539289b99788eb27d4e Mon Sep 17 00:00:00 2001 From: Florin Malita Date: Mon, 5 Jun 2006 15:34:33 -0700 Subject: [PPPOE]: Missing result check in __pppoe_xmit(). skb_clone() may fail, we should check the result. Coverity CID: 1215. Signed-off-by: Florin Malita Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/net/pppoe.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c index 475dc930380f..0d101a18026a 100644 --- a/drivers/net/pppoe.c +++ b/drivers/net/pppoe.c @@ -861,6 +861,9 @@ static int __pppoe_xmit(struct sock *sk, struct sk_buff *skb) * give dev_queue_xmit something it can free. */ skb2 = skb_clone(skb, GFP_ATOMIC); + + if (skb2 == NULL) + goto abort; } ph = (struct pppoe_hdr *) skb_push(skb2, sizeof(struct pppoe_hdr)); -- cgit v1.2.2 From b9b6e78b11de295ef073271979355d5fab71b877 Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Thu, 8 Jun 2006 09:28:38 -0700 Subject: e1000: fix ethtool test irq alloc as "probe" New code added in 2.6.17 caused setup_irq to print a warning when running ethtool -t eth0 offline. This test marks the request_irq call made by this test as a "probe" to see if the interrupt is shared or not. Signed-off-by: Jesse Brandeburg Signed-off-by: Auke Kok --- drivers/net/e1000/e1000_ethtool.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index ecccca35c6f4..d1c705b412c2 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -870,13 +870,16 @@ e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data) *data = 0; /* Hook up test interrupt handler just for this test */ - if (!request_irq(irq, &e1000_test_intr, 0, netdev->name, netdev)) { + if (!request_irq(irq, &e1000_test_intr, SA_PROBEIRQ, netdev->name, + netdev)) { shared_int = FALSE; } else if (request_irq(irq, &e1000_test_intr, SA_SHIRQ, netdev->name, netdev)){ *data = 1; return -1; } + DPRINTK(PROBE,INFO, "testing %s interrupt\n", + (shared_int ? "shared" : "unshared")); /* Disable all the interrupts */ E1000_WRITE_REG(&adapter->hw, IMC, 0xFFFFFFFF); -- cgit v1.2.2 From 24f476eeecba66524af3f95e31ac208eea99e617 Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Thu, 8 Jun 2006 09:28:47 -0700 Subject: e1000: remove risky prefetch on next_skb->data It was brought to our attention that the prefetches break e1000 traffic on xscale/arm architectures. Remove them for now. We'll let them stay in mm for a while, or find a better solution to enable. Signed-off-by: Jesse Brandeburg Signed-off-by: Auke Kok --- drivers/net/e1000/e1000_main.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index ed15fcaedaf9..97e71a4fe8eb 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -3519,7 +3519,7 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter, buffer_info = &rx_ring->buffer_info[i]; while (rx_desc->status & E1000_RXD_STAT_DD) { - struct sk_buff *skb, *next_skb; + struct sk_buff *skb; u8 status; #ifdef CONFIG_E1000_NAPI if (*work_done >= work_to_do) @@ -3537,8 +3537,6 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter, prefetch(next_rxd); next_buffer = &rx_ring->buffer_info[i]; - next_skb = next_buffer->skb; - prefetch(next_skb->data - NET_IP_ALIGN); cleaned = TRUE; cleaned_count++; @@ -3668,7 +3666,7 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, struct e1000_buffer *buffer_info, *next_buffer; struct e1000_ps_page *ps_page; struct e1000_ps_page_dma *ps_page_dma; - struct sk_buff *skb, *next_skb; + struct sk_buff *skb; unsigned int i, j; uint32_t length, staterr; int cleaned_count = 0; @@ -3697,8 +3695,6 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, prefetch(next_rxd); next_buffer = &rx_ring->buffer_info[i]; - next_skb = next_buffer->skb; - prefetch(next_skb->data - NET_IP_ALIGN); cleaned = TRUE; cleaned_count++; -- cgit v1.2.2 From f49639e643e69ff233b14966b8d48541d2e17517 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 9 Jun 2006 11:58:36 -0700 Subject: [TG3]: Handle Sun onboard tg3 chips more correctly. Get rid of all the SUN_570X logic and instead: 1) Make sure MEMARB_ENABLE is set when we probe the SRAM for config information. If that is off we will get timeouts. 2) Always try to sync with the firmware, if there is no firmware running do not treat it as an error and instead just report it the first time we notice this condition. 3) If there is no valid SRAM signature, assume the device is onboard by setting TG3_FLAG_EEPROM_WRITE_PROT. Update driver version and release date. With help from Michael Chan and Fabio Massimo Di Nitto. Signed-off-by: David S. Miller --- drivers/net/tg3.c | 144 ++++++++++++++++++------------------------------------ drivers/net/tg3.h | 3 +- 2 files changed, 50 insertions(+), 97 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 49ad60b72657..862c226dbbe2 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -69,8 +69,8 @@ #define DRV_MODULE_NAME "tg3" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "3.58" -#define DRV_MODULE_RELDATE "May 22, 2006" +#define DRV_MODULE_VERSION "3.59" +#define DRV_MODULE_RELDATE "June 8, 2006" #define TG3_DEF_MAC_MODE 0 #define TG3_DEF_RX_MODE 0 @@ -4485,9 +4485,8 @@ static void tg3_disable_nvram_access(struct tg3 *tp) /* tp->lock is held. */ static void tg3_write_sig_pre_reset(struct tg3 *tp, int kind) { - if (!(tp->tg3_flags2 & TG3_FLG2_SUN_570X)) - tg3_write_mem(tp, NIC_SRAM_FIRMWARE_MBOX, - NIC_SRAM_FIRMWARE_MBOX_MAGIC1); + tg3_write_mem(tp, NIC_SRAM_FIRMWARE_MBOX, + NIC_SRAM_FIRMWARE_MBOX_MAGIC1); if (tp->tg3_flags2 & TG3_FLG2_ASF_NEW_HANDSHAKE) { switch (kind) { @@ -4568,13 +4567,12 @@ static int tg3_chip_reset(struct tg3 *tp) void (*write_op)(struct tg3 *, u32, u32); int i; - if (!(tp->tg3_flags2 & TG3_FLG2_SUN_570X)) { - tg3_nvram_lock(tp); - /* No matching tg3_nvram_unlock() after this because - * chip reset below will undo the nvram lock. - */ - tp->nvram_lock_cnt = 0; - } + tg3_nvram_lock(tp); + + /* No matching tg3_nvram_unlock() after this because + * chip reset below will undo the nvram lock. + */ + tp->nvram_lock_cnt = 0; if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5752 || GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 || @@ -4727,20 +4725,25 @@ static int tg3_chip_reset(struct tg3 *tp) tw32_f(MAC_MODE, 0); udelay(40); - if (!(tp->tg3_flags2 & TG3_FLG2_SUN_570X)) { - /* Wait for firmware initialization to complete. */ - for (i = 0; i < 100000; i++) { - tg3_read_mem(tp, NIC_SRAM_FIRMWARE_MBOX, &val); - if (val == ~NIC_SRAM_FIRMWARE_MBOX_MAGIC1) - break; - udelay(10); - } - if (i >= 100000) { - printk(KERN_ERR PFX "tg3_reset_hw timed out for %s, " - "firmware will not restart magic=%08x\n", - tp->dev->name, val); - return -ENODEV; - } + /* Wait for firmware initialization to complete. */ + for (i = 0; i < 100000; i++) { + tg3_read_mem(tp, NIC_SRAM_FIRMWARE_MBOX, &val); + if (val == ~NIC_SRAM_FIRMWARE_MBOX_MAGIC1) + break; + udelay(10); + } + + /* Chip might not be fitted with firmare. Some Sun onboard + * parts are configured like that. So don't signal the timeout + * of the above loop as an error, but do report the lack of + * running firmware once. + */ + if (i >= 100000 && + !(tp->tg3_flags2 & TG3_FLG2_NO_FWARE_REPORTED)) { + tp->tg3_flags2 |= TG3_FLG2_NO_FWARE_REPORTED; + + printk(KERN_INFO PFX "%s: No firmware running.\n", + tp->dev->name); } if ((tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) && @@ -9075,9 +9078,6 @@ static void __devinit tg3_nvram_init(struct tg3 *tp) { int j; - if (tp->tg3_flags2 & TG3_FLG2_SUN_570X) - return; - tw32_f(GRC_EEPROM_ADDR, (EEPROM_ADDR_FSM_RESET | (EEPROM_DEFAULT_CLOCK_PERIOD << @@ -9210,11 +9210,6 @@ static int tg3_nvram_read(struct tg3 *tp, u32 offset, u32 *val) { int ret; - if (tp->tg3_flags2 & TG3_FLG2_SUN_570X) { - printk(KERN_ERR PFX "Attempt to do nvram_read on Sun 570X\n"); - return -EINVAL; - } - if (!(tp->tg3_flags & TG3_FLAG_NVRAM)) return tg3_nvram_read_using_eeprom(tp, offset, val); @@ -9447,11 +9442,6 @@ static int tg3_nvram_write_block(struct tg3 *tp, u32 offset, u32 len, u8 *buf) { int ret; - if (tp->tg3_flags2 & TG3_FLG2_SUN_570X) { - printk(KERN_ERR PFX "Attempt to do nvram_write on Sun 570X\n"); - return -EINVAL; - } - if (tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT) { tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl & ~GRC_LCLCTRL_GPIO_OUTPUT1); @@ -9578,15 +9568,19 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp) pci_write_config_dword(tp->pdev, TG3PCI_MISC_HOST_CTRL, tp->misc_host_ctrl); + /* The memory arbiter has to be enabled in order for SRAM accesses + * to succeed. Normally on powerup the tg3 chip firmware will make + * sure it is enabled, but other entities such as system netboot + * code might disable it. + */ + val = tr32(MEMARB_MODE); + tw32(MEMARB_MODE, val | MEMARB_MODE_ENABLE); + tp->phy_id = PHY_ID_INVALID; tp->led_ctrl = LED_CTRL_MODE_PHY_1; - /* Do not even try poking around in here on Sun parts. */ - if (tp->tg3_flags2 & TG3_FLG2_SUN_570X) { - /* All SUN chips are built-in LOMs. */ - tp->tg3_flags |= TG3_FLAG_EEPROM_WRITE_PROT; - return; - } + /* Assume an onboard device by default. */ + tp->tg3_flags |= TG3_FLAG_EEPROM_WRITE_PROT; tg3_read_mem(tp, NIC_SRAM_DATA_SIG, &val); if (val == NIC_SRAM_DATA_SIG_MAGIC) { @@ -9686,6 +9680,8 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp) if (nic_cfg & NIC_SRAM_DATA_CFG_EEPROM_WP) tp->tg3_flags |= TG3_FLAG_EEPROM_WRITE_PROT; + else + tp->tg3_flags &= ~TG3_FLAG_EEPROM_WRITE_PROT; if (nic_cfg & NIC_SRAM_DATA_CFG_ASF_ENABLE) { tp->tg3_flags |= TG3_FLAG_ENABLE_ASF; @@ -9834,16 +9830,8 @@ static void __devinit tg3_read_partno(struct tg3 *tp) int i; u32 magic; - if (tp->tg3_flags2 & TG3_FLG2_SUN_570X) { - /* Sun decided not to put the necessary bits in the - * NVRAM of their onboard tg3 parts :( - */ - strcpy(tp->board_part_number, "Sun 570X"); - return; - } - if (tg3_nvram_read_swab(tp, 0x0, &magic)) - return; + goto out_not_found; if (magic == TG3_EEPROM_MAGIC) { for (i = 0; i < 256; i += 4) { @@ -9874,6 +9862,9 @@ static void __devinit tg3_read_partno(struct tg3 *tp) break; msleep(1); } + if (!(tmp16 & 0x8000)) + goto out_not_found; + pci_read_config_dword(tp->pdev, vpd_cap + PCI_VPD_DATA, &tmp); tmp = cpu_to_le32(tmp); @@ -9965,37 +9956,6 @@ static void __devinit tg3_read_fw_ver(struct tg3 *tp) } } -#ifdef CONFIG_SPARC64 -static int __devinit tg3_is_sun_570X(struct tg3 *tp) -{ - struct pci_dev *pdev = tp->pdev; - struct pcidev_cookie *pcp = pdev->sysdata; - - if (pcp != NULL) { - int node = pcp->prom_node; - u32 venid; - int err; - - err = prom_getproperty(node, "subsystem-vendor-id", - (char *) &venid, sizeof(venid)); - if (err == 0 || err == -1) - return 0; - if (venid == PCI_VENDOR_ID_SUN) - return 1; - - /* TG3 chips onboard the SunBlade-2500 don't have the - * subsystem-vendor-id set to PCI_VENDOR_ID_SUN but they - * are distinguishable from non-Sun variants by being - * named "network" by the firmware. Non-Sun cards will - * show up as being named "ethernet". - */ - if (!strcmp(pcp->prom_name, "network")) - return 1; - } - return 0; -} -#endif - static int __devinit tg3_get_invariants(struct tg3 *tp) { static struct pci_device_id write_reorder_chipsets[] = { @@ -10012,11 +9972,6 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) u16 pci_cmd; int err; -#ifdef CONFIG_SPARC64 - if (tg3_is_sun_570X(tp)) - tp->tg3_flags2 |= TG3_FLG2_SUN_570X; -#endif - /* Force memory write invalidate off. If we leave it on, * then on 5700_BX chips we have to enable a workaround. * The workaround is to set the TG3PCI_DMA_RW_CTRL boundary @@ -10312,8 +10267,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) if (tp->write32 == tg3_write_indirect_reg32 || ((tp->tg3_flags & TG3_FLAG_PCIX_MODE) && (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701)) || - (tp->tg3_flags2 & TG3_FLG2_SUN_570X)) + GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701))) tp->tg3_flags |= TG3_FLAG_SRAM_USE_CONFIG; /* Get eeprom hw config before calling tg3_set_power_state(). @@ -10594,8 +10548,7 @@ static int __devinit tg3_get_device_address(struct tg3 *tp) #endif mac_offset = 0x7c; - if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 && - !(tp->tg3_flags & TG3_FLG2_SUN_570X)) || + if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) || (tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) { if (tr32(TG3PCI_DUAL_MAC_CTRL) & DUAL_MAC_CTRL_ID) mac_offset = 0xcc; @@ -10622,8 +10575,7 @@ static int __devinit tg3_get_device_address(struct tg3 *tp) } if (!addr_ok) { /* Next, try NVRAM. */ - if (!(tp->tg3_flags & TG3_FLG2_SUN_570X) && - !tg3_nvram_read(tp, mac_offset + 0, &hi) && + if (!tg3_nvram_read(tp, mac_offset + 0, &hi) && !tg3_nvram_read(tp, mac_offset + 4, &lo)) { dev->dev_addr[0] = ((hi >> 16) & 0xff); dev->dev_addr[1] = ((hi >> 24) & 0xff); diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h index 0e29b885d449..ff0faab94bd5 100644 --- a/drivers/net/tg3.h +++ b/drivers/net/tg3.h @@ -2184,7 +2184,7 @@ struct tg3 { #define TG3_FLAG_INIT_COMPLETE 0x80000000 u32 tg3_flags2; #define TG3_FLG2_RESTART_TIMER 0x00000001 -#define TG3_FLG2_SUN_570X 0x00000002 +/* 0x00000002 available */ #define TG3_FLG2_NO_ETH_WIRE_SPEED 0x00000004 #define TG3_FLG2_IS_5788 0x00000008 #define TG3_FLG2_MAX_RXPEND_64 0x00000010 @@ -2216,6 +2216,7 @@ struct tg3 { #define TG3_FLG2_HW_TSO (TG3_FLG2_HW_TSO_1 | TG3_FLG2_HW_TSO_2) #define TG3_FLG2_1SHOT_MSI 0x10000000 #define TG3_FLG2_PHY_JITTER_BUG 0x20000000 +#define TG3_FLG2_NO_FWARE_REPORTED 0x40000000 u32 split_mode_max_reqs; #define SPLIT_MODE_5704_MAX_REQ 3 -- cgit v1.2.2 From d374c1c1281d6188a0d0676172b1c0e3de35c6e7 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 12 Jun 2006 12:53:27 -0700 Subject: [sky2] Fix sky2 network driver suspend/resume This fixes two independent problems: it would not save the PCI state on suspend (and thus try to resume a nonexistent state on resume), and while shut off, if an interrupt happened on the same shared irq, the irq handler would react very badly to the interrupt status being an invalid all-ones state. Acked-by: Jeff Garzik Signed-off-by: Linus Torvalds --- drivers/net/sky2.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 959109609d85..6b87c7a5c906 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -2183,6 +2183,9 @@ static int sky2_poll(struct net_device *dev0, int *budget) int work_done = 0; u32 status = sky2_read32(hw, B0_Y2_SP_EISR); + if (!~status) + return 0; + if (status & Y2_IS_HW_ERR) sky2_hw_intr(hw); @@ -3438,6 +3441,7 @@ static int sky2_suspend(struct pci_dev *pdev, pm_message_t state) } } + pci_save_state(pdev); return sky2_set_power_state(hw, pci_choose_state(pdev, state)); } -- cgit v1.2.2