From d49aba84fe775671133295658f43f4d142a517f9 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 8 Jun 2010 07:00:20 +0000 Subject: enic: fix pci_alloc_consistent argument Fix build warning on i386 (32-bit) with 32-bit dma_addr_t: drivers/net/enic/vnic_dev.c: In function 'vnic_dev_init_prov': drivers/net/enic/vnic_dev.c:716: warning: passing argument 3 of 'pci_alloc_consistent' from incompatible pointer type include/asm-generic/pci-dma-compat.h:16: note: expected 'dma_addr_t *' but argument is of type 'u64 *' Now builds without warnings on i386 and on x86_64. Signed-off-by: Randy Dunlap Cc: Scott Feldman Cc: Vasanthy Kolluri Cc: Roopa Prabhu Acked-by: Scott Feldman --- drivers/net/enic/vnic_dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/enic/vnic_dev.c b/drivers/net/enic/vnic_dev.c index 2b3e16db5c82..e0d33281ec98 100644 --- a/drivers/net/enic/vnic_dev.c +++ b/drivers/net/enic/vnic_dev.c @@ -709,7 +709,7 @@ int vnic_dev_init_prov(struct vnic_dev *vdev, u8 *buf, u32 len) { u64 a0, a1 = len; int wait = 1000; - u64 prov_pa; + dma_addr_t prov_pa; void *prov_buf; int ret; -- cgit v1.2.2 From d08935c274b7e552e47633cf0cbd74b6e953d228 Mon Sep 17 00:00:00 2001 From: Don Skidmore Date: Fri, 11 Jun 2010 13:20:29 +0000 Subject: ixgbe: fix for race with 8259(8|9) during shutdown There is a small window where the watchdog could be running as the interface is brought down on a NIC with two ports wired back to back. If ixgbe_update_status is then called can lead to a panic. This patch allows the update to bail if we are in that condition. This issue was orignally reported and fix proposed by Akihiko Saitou. CC: Akihiko Saitou Signed-off-by: Don Skidmore Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_main.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index b2af2f67f604..ce30c62a97f7 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -5282,6 +5282,10 @@ void ixgbe_update_stats(struct ixgbe_adapter *adapter) u32 i, missed_rx = 0, mpc, bprc, lxon, lxoff, xon_off_tot; u64 non_eop_descs = 0, restart_queue = 0; + if (test_bit(__IXGBE_DOWN, &adapter->state) || + test_bit(__IXGBE_RESETTING, &adapter->state)) + return; + if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) { u64 rsc_count = 0; u64 rsc_flush = 0; -- cgit v1.2.2 From 7837e58ce39bd727e0a163e7d34e479df36f6d29 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Fri, 11 Jun 2010 12:51:49 +0000 Subject: e1000: Fix message logging defect commit 675ad47375c76a7c3be4ace9554d92cd55518ced removed the capability to use ethtool.set_msglevel to control the types of messages emitted by the driver. That commit should probably be reverted. If not, then this patch fixes a message logging defect introduced by converting a printk without KERN_ to e_info. This also reduces text by about 200 bytes. Signed-off-by: Joe Perches Tested-by: Emil Tantilov Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000/e1000_main.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index ebdea0891665..68a80893dce1 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -1047,15 +1047,14 @@ static int __devinit e1000_probe(struct pci_dev *pdev, goto err_register; /* print bus type/speed/width info */ - e_info("(PCI%s:%s:%s) ", - ((hw->bus_type == e1000_bus_type_pcix) ? "-X" : ""), - ((hw->bus_speed == e1000_bus_speed_133) ? "133MHz" : - (hw->bus_speed == e1000_bus_speed_120) ? "120MHz" : - (hw->bus_speed == e1000_bus_speed_100) ? "100MHz" : - (hw->bus_speed == e1000_bus_speed_66) ? "66MHz" : "33MHz"), - ((hw->bus_width == e1000_bus_width_64) ? "64-bit" : "32-bit")); - - e_info("%pM\n", netdev->dev_addr); + e_info("(PCI%s:%dMHz:%d-bit) %pM\n", + ((hw->bus_type == e1000_bus_type_pcix) ? "-X" : ""), + ((hw->bus_speed == e1000_bus_speed_133) ? 133 : + (hw->bus_speed == e1000_bus_speed_120) ? 120 : + (hw->bus_speed == e1000_bus_speed_100) ? 100 : + (hw->bus_speed == e1000_bus_speed_66) ? 66 : 33), + ((hw->bus_width == e1000_bus_width_64) ? 64 : 32), + netdev->dev_addr); /* carrier off reporting is important to ethtool even BEFORE open */ netif_carrier_off(netdev); -- cgit v1.2.2 From 28c8e4790ca5ef75f54895ca46437f9fbb433ddf Mon Sep 17 00:00:00 2001 From: Andy Gospodarek Date: Fri, 11 Jun 2010 12:47:03 +0000 Subject: ixgbe: fix automatic LRO/RSC settings for low latency This patch added to 2.6.34: commit f8d1dcaf88bddc7f282722ec1fdddbcb06a72f18 Author: Jesse Brandeburg Date: Tue Apr 27 01:37:20 2010 +0000 ixgbe: enable extremely low latency introduced a feature where LRO (called RSC on the hardware) was disabled automatically when setting rx-usecs to 0 via ethtool. Some might not like the fact that LRO was disabled automatically, but I'm fine with that. What I don't like is that LRO/RSC is automatically enabled when rx-usecs is set >0 via ethtool. This would certainly be a problem if the device was used for forwarding and it was determined that the low latency wasn't needed after the device was already forwarding. I played around with saving the state of LRO in the driver, but it just didn't seem worthwhile and would require a small change to dev_disable_lro() that I did not like. This patch simply leaves LRO disabled when setting rx-usecs >0 and requires that the user enable it again. An extra informational message will also now appear in the log so users can understand why LRO isn't being enabled as they expect. Inconsistency of LRO setting first noticed by Stanislaw Gruszka. Signed-off-by: Andy Gospodarek CC: Stanislaw Gruszka CC: stable@kernel.org Tested-by: Stephen Ko Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_ethtool.c | 37 ++++++++----------------------------- 1 file changed, 8 insertions(+), 29 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c index c50a7541ffec..3a93a81872b8 100644 --- a/drivers/net/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ixgbe/ixgbe_ethtool.c @@ -2077,25 +2077,6 @@ static int ixgbe_get_coalesce(struct net_device *netdev, return 0; } -/* - * this function must be called before setting the new value of - * rx_itr_setting - */ -static bool ixgbe_reenable_rsc(struct ixgbe_adapter *adapter, - struct ethtool_coalesce *ec) -{ - /* check the old value and enable RSC if necessary */ - if ((adapter->rx_itr_setting == 0) && - (adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE)) { - adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED; - adapter->netdev->features |= NETIF_F_LRO; - DPRINTK(PROBE, INFO, "rx-usecs set to %d, re-enabling RSC\n", - ec->rx_coalesce_usecs); - return true; - } - return false; -} - static int ixgbe_set_coalesce(struct net_device *netdev, struct ethtool_coalesce *ec) { @@ -2124,9 +2105,6 @@ static int ixgbe_set_coalesce(struct net_device *netdev, (1000000/ec->rx_coalesce_usecs < IXGBE_MIN_INT_RATE)) return -EINVAL; - /* check the old value and enable RSC if necessary */ - need_reset = ixgbe_reenable_rsc(adapter, ec); - /* store the value in ints/second */ adapter->rx_eitr_param = 1000000/ec->rx_coalesce_usecs; @@ -2135,9 +2113,6 @@ static int ixgbe_set_coalesce(struct net_device *netdev, /* clear the lower bit as its used for dynamic state */ adapter->rx_itr_setting &= ~1; } else if (ec->rx_coalesce_usecs == 1) { - /* check the old value and enable RSC if necessary */ - need_reset = ixgbe_reenable_rsc(adapter, ec); - /* 1 means dynamic mode */ adapter->rx_eitr_param = 20000; adapter->rx_itr_setting = 1; @@ -2157,10 +2132,11 @@ static int ixgbe_set_coalesce(struct net_device *netdev, */ if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) { adapter->flags2 &= ~IXGBE_FLAG2_RSC_ENABLED; - netdev->features &= ~NETIF_F_LRO; - DPRINTK(PROBE, INFO, - "rx-usecs set to 0, disabling RSC\n"); - + if (netdev->features & NETIF_F_LRO) { + netdev->features &= ~NETIF_F_LRO; + DPRINTK(PROBE, INFO, "rx-usecs set to 0, " + "disabling LRO/RSC\n"); + } need_reset = true; } } @@ -2255,6 +2231,9 @@ static int ixgbe_set_flags(struct net_device *netdev, u32 data) } } else if (!adapter->rx_itr_setting) { netdev->features &= ~ETH_FLAG_LRO; + if (data & ETH_FLAG_LRO) + DPRINTK(PROBE, INFO, "rx-usecs set to 0, " + "LRO/RSC cannot be enabled.\n"); } } -- cgit v1.2.2 From da5ae1cfff4cc5b9392eab59b227ad907626d7aa Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Fri, 28 May 2010 09:28:39 -0700 Subject: iwlwifi: serialize station management actions We are seeing some race conditions between incoming station management requests (station add/remove) and the internal unassoc RXON command that modifies station table. Modify these flows to require the mutex to be held and thus serializing them. This fixes http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2207 Signed-off-by: Reinette Chatre --- drivers/net/wireless/iwlwifi/iwl-agn.c | 8 ++++++-- drivers/net/wireless/iwlwifi/iwl-sta.c | 4 ++++ drivers/net/wireless/iwlwifi/iwl3945-base.c | 9 +++++++-- 3 files changed, 17 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 7726e67044c0..24aff654fa9c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -3391,10 +3391,12 @@ static int iwlagn_mac_sta_add(struct ieee80211_hw *hw, int ret; u8 sta_id; - sta_priv->common.sta_id = IWL_INVALID_STATION; - IWL_DEBUG_INFO(priv, "received request to add station %pM\n", sta->addr); + mutex_lock(&priv->mutex); + IWL_DEBUG_INFO(priv, "proceeding to add station %pM\n", + sta->addr); + sta_priv->common.sta_id = IWL_INVALID_STATION; atomic_set(&sta_priv->pending_frames, 0); if (vif->type == NL80211_IFTYPE_AP) @@ -3406,6 +3408,7 @@ static int iwlagn_mac_sta_add(struct ieee80211_hw *hw, IWL_ERR(priv, "Unable to add station %pM (%d)\n", sta->addr, ret); /* Should we return success if return code is EEXIST ? */ + mutex_unlock(&priv->mutex); return ret; } @@ -3415,6 +3418,7 @@ static int iwlagn_mac_sta_add(struct ieee80211_hw *hw, IWL_DEBUG_INFO(priv, "Initializing rate scaling for station %pM\n", sta->addr); iwl_rs_rate_init(priv, sta, sta_id); + mutex_unlock(&priv->mutex); return 0; } diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c index 83a26361a9b5..c27c13fbb1ae 100644 --- a/drivers/net/wireless/iwlwifi/iwl-sta.c +++ b/drivers/net/wireless/iwlwifi/iwl-sta.c @@ -1373,10 +1373,14 @@ int iwl_mac_sta_remove(struct ieee80211_hw *hw, IWL_DEBUG_INFO(priv, "received request to remove station %pM\n", sta->addr); + mutex_lock(&priv->mutex); + IWL_DEBUG_INFO(priv, "proceeding to remove station %pM\n", + sta->addr); ret = iwl_remove_station(priv, sta_common->sta_id, sta->addr); if (ret) IWL_ERR(priv, "Error removing station %pM\n", sta->addr); + mutex_unlock(&priv->mutex); return ret; } EXPORT_SYMBOL(iwl_mac_sta_remove); diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 6c353cacc8d6..a27872de4106 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -3437,10 +3437,13 @@ static int iwl3945_mac_sta_add(struct ieee80211_hw *hw, bool is_ap = vif->type == NL80211_IFTYPE_STATION; u8 sta_id; - sta_priv->common.sta_id = IWL_INVALID_STATION; - IWL_DEBUG_INFO(priv, "received request to add station %pM\n", sta->addr); + mutex_lock(&priv->mutex); + IWL_DEBUG_INFO(priv, "proceeding to add station %pM\n", + sta->addr); + sta_priv->common.sta_id = IWL_INVALID_STATION; + ret = iwl_add_station_common(priv, sta->addr, is_ap, &sta->ht_cap, &sta_id); @@ -3448,6 +3451,7 @@ static int iwl3945_mac_sta_add(struct ieee80211_hw *hw, IWL_ERR(priv, "Unable to add station %pM (%d)\n", sta->addr, ret); /* Should we return success if return code is EEXIST ? */ + mutex_unlock(&priv->mutex); return ret; } @@ -3457,6 +3461,7 @@ static int iwl3945_mac_sta_add(struct ieee80211_hw *hw, IWL_DEBUG_INFO(priv, "Initializing rate scaling for station %pM\n", sta->addr); iwl3945_rs_rate_init(priv, sta, sta_id); + mutex_unlock(&priv->mutex); return 0; } -- cgit v1.2.2 From b561e8274f75831ee87e4ea378cbb1f9f050a51a Mon Sep 17 00:00:00 2001 From: Shanyu Zhao Date: Tue, 1 Jun 2010 17:13:58 -0700 Subject: iwlagn: verify flow id in compressed BA packet The flow id (scd_flow) in a compressed BA packet should match the txq_id of the queue from which the aggregated packets were sent. However, in some hardware like the 1000 series, sometimes the flow id is 0 for the txq_id (10 to 19). This can cause the annoying message: [ 2213.306191] iwlagn 0000:01:00.0: Received BA when not expected [ 2213.310178] iwlagn 0000:01:00.0: Read index for DMA queue txq id (0), index 5, is out of range [0-256] 7 7. And even worse, if agg->wait_for_ba is true when the bad BA is arriving, this can cause system hang due to NULL pointer dereference because the code is operating in a wrong tx queue! Signed-off-by: Shanyu Zhao Signed-off-by: Pradeep Kulkarni Signed-off-by: Reinette Chatre --- drivers/net/wireless/iwlwifi/iwl-agn-tx.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-tx.c b/drivers/net/wireless/iwlwifi/iwl-agn-tx.c index a732f1094e5d..7d614c4d3c62 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-tx.c @@ -1299,6 +1299,11 @@ void iwlagn_rx_reply_compressed_ba(struct iwl_priv *priv, sta_id = ba_resp->sta_id; tid = ba_resp->tid; agg = &priv->stations[sta_id].tid[tid].agg; + if (unlikely(agg->txq_id != scd_flow)) { + IWL_ERR(priv, "BA scd_flow %d does not match txq_id %d\n", + scd_flow, agg->txq_id); + return; + } /* Find index just before block-ack window */ index = iwl_queue_dec_wrap(ba_resp_scd_ssn & 0xff, txq->q.n_bd); -- cgit v1.2.2 From 13deb23a52c13053fc509f119eb80b903c65a879 Mon Sep 17 00:00:00 2001 From: Prarit Bhargava Date: Thu, 10 Jun 2010 08:08:42 -0400 Subject: libertas_tf: Fix warning in lbtf_rx for stats struct Fixes linux-2.6 warning: drivers/net/wireless/libertas_tf/main.c: In function 'lbtf_rx': drivers/net/wireless/libertas_tf/main.c:578: warning: 'stats.antenna' is used uninitialized in this function drivers/net/wireless/libertas_tf/main.c:578: warning: 'stats.mactime' is used uninitialized in this function stats struct needs to be set to 0 before use. Signed-off-by: Prarit Bhargava Signed-off-by: John W. Linville --- drivers/net/wireless/libertas_tf/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/libertas_tf/main.c b/drivers/net/wireless/libertas_tf/main.c index 6a04c2157f73..817fffc0de4b 100644 --- a/drivers/net/wireless/libertas_tf/main.c +++ b/drivers/net/wireless/libertas_tf/main.c @@ -549,7 +549,7 @@ int lbtf_rx(struct lbtf_private *priv, struct sk_buff *skb) prxpd = (struct rxpd *) skb->data; - stats.flag = 0; + memset(&stats, 0, sizeof(stats)); if (!(prxpd->status & cpu_to_le16(MRVDRV_RXPD_STATUS_OK))) stats.flag |= RX_FLAG_FAILED_FCS_CRC; stats.freq = priv->cur_freq; -- cgit v1.2.2 From 50900f1698f68127e54c67fdfe829e4a97b1be2b Mon Sep 17 00:00:00 2001 From: Joerg Albert Date: Sun, 13 Jun 2010 14:22:23 +0200 Subject: p54pci: add Symbol AP-300 minipci adapters pciid Cc: stable@kernel.org Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/p54/p54pci.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/p54/p54pci.c b/drivers/net/wireless/p54/p54pci.c index 07c4528f6e6b..a5ea89cde8c4 100644 --- a/drivers/net/wireless/p54/p54pci.c +++ b/drivers/net/wireless/p54/p54pci.c @@ -41,6 +41,8 @@ static DEFINE_PCI_DEVICE_TABLE(p54p_table) = { { PCI_DEVICE(0x1260, 0x3877) }, /* Intersil PRISM Javelin/Xbow Wireless LAN adapter */ { PCI_DEVICE(0x1260, 0x3886) }, + /* Intersil PRISM Xbow Wireless LAN adapter (Symbol AP-300) */ + { PCI_DEVICE(0x1260, 0xffff) }, { }, }; -- cgit v1.2.2 From a69b03e941abae00380fc6bc1877fb797a1b31e6 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 14 Jun 2010 14:30:25 -0400 Subject: iwlwifi: cancel scan watchdog in iwl_bg_abort_scan Avoids this: WARNING: at net/mac80211/scan.c:312 ieee80211_scan_completed+0x5f/0x1f1 [mac80211]() Hardware name: Latitude E5400 Modules linked in: aes_x86_64 aes_generic fuse ipt_MASQUERADE iptable_nat nf_nat rfcomm sco bridge stp llc bnep l2cap sunrpc cpufreq_ondemand acpi_cpufreq freq_table xt_physdev ip6t_REJECT nf_conntrack_ipv6 ip6table_filter ip6_tables ipv6 kvm_intel kvm uinput arc4 ecb snd_hda_codec_intelhdmi snd_hda_codec_idt snd_hda_intel iwlagn snd_hda_codec snd_hwdep snd_seq snd_seq_device iwlcore snd_pcm dell_wmi sdhci_pci sdhci iTCO_wdt tg3 dell_laptop mmc_core i2c_i801 wmi mac80211 snd_timer iTCO_vendor_support btusb joydev dcdbas cfg80211 bluetooth snd soundcore microcode rfkill snd_page_alloc firewire_ohci firewire_core crc_itu_t yenta_socket rsrc_nonstatic i915 drm_kms_helper drm i2c_algo_bit i2c_core video output [last unloaded: scsi_wait_scan] Pid: 979, comm: iwlagn Tainted: G W 2.6.33.3-85.fc13.x86_64 #1 Call Trace: [] warn_slowpath_common+0x77/0x8f [] warn_slowpath_null+0xf/0x11 [] ieee80211_scan_completed+0x5f/0x1f1 [mac80211] [] iwl_bg_scan_completed+0xbb/0x17a [iwlcore] [] worker_thread+0x1a4/0x232 [] ? iwl_bg_scan_completed+0x0/0x17a [iwlcore] [] ? autoremove_wake_function+0x0/0x34 [] ? worker_thread+0x0/0x232 [] kthread+0x7a/0x82 [] kernel_thread_helper+0x4/0x10 [] ? kthread+0x0/0x82 [] ? kernel_thread_helper+0x0/0x10 Reported here: https://bugzilla.redhat.com/show_bug.cgi?id=590436 Signed-off-by: John W. Linville Reported-by: Mihai Harpau Cc: stable@kernel.org Acked-by: Reinette Chatre --- drivers/net/wireless/iwlwifi/iwl-scan.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c index 5d3f51ff2f0d..386c5f96eff8 100644 --- a/drivers/net/wireless/iwlwifi/iwl-scan.c +++ b/drivers/net/wireless/iwlwifi/iwl-scan.c @@ -491,6 +491,7 @@ void iwl_bg_abort_scan(struct work_struct *work) mutex_lock(&priv->mutex); + cancel_delayed_work_sync(&priv->scan_check); set_bit(STATUS_SCAN_ABORTING, &priv->status); iwl_send_scan_abort(priv); -- cgit v1.2.2 From 84cc1535cb9043ea1921b81cb086138c0f2dc2b9 Mon Sep 17 00:00:00 2001 From: "Morten H. Larsen" Date: Tue, 15 Jun 2010 13:24:58 -0400 Subject: alpha: Fix de2104x driver failing to readout MAC address correctly This patch fixes a missing read memory barrier that is needed for the driver to readout the MAC address correctly from the on-board ROM. Also it replaces the use of the deprecated functions readl()/writel(). Signed-off-by: Morten H. Larsen Signed-off-by: Matt Turner --- drivers/net/tulip/de2104x.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c index c0e70006374e..06b552fca63d 100644 --- a/drivers/net/tulip/de2104x.c +++ b/drivers/net/tulip/de2104x.c @@ -367,8 +367,8 @@ static u16 t21041_csr14[] = { 0xFFFF, 0xF7FD, 0xF7FD, 0x6F3F, 0x6F3D, }; static u16 t21041_csr15[] = { 0x0008, 0x0006, 0x000E, 0x0008, 0x0008, }; -#define dr32(reg) readl(de->regs + (reg)) -#define dw32(reg,val) writel((val), de->regs + (reg)) +#define dr32(reg) ioread32(de->regs + (reg)) +#define dw32(reg, val) iowrite32((val), de->regs + (reg)) static void de_rx_err_acct (struct de_private *de, unsigned rx_tail, @@ -1706,6 +1706,7 @@ static void __devinit de21040_get_mac_address (struct de_private *de) int value, boguscnt = 100000; do { value = dr32(ROMCmd); + rmb(); } while (value < 0 && --boguscnt > 0); de->dev->dev_addr[i] = value; udelay(1); -- cgit v1.2.2 From d6a574ff6bfb842bdb98065da053881ff527be46 Mon Sep 17 00:00:00 2001 From: Tim Gardner Date: Tue, 8 Jun 2010 11:33:02 -0600 Subject: hostap: Protect against initialization interrupt Use an irq spinlock to hold off the IRQ handler until enough early card init is complete such that the handler can run without faulting. Signed-off-by: Tim Gardner Cc: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/hostap/hostap_cs.c | 15 +++++++++++++-- drivers/net/wireless/hostap/hostap_hw.c | 13 +++++++++++++ drivers/net/wireless/hostap/hostap_wlan.h | 2 +- 3 files changed, 27 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c index db72461c486b..29b31a694b59 100644 --- a/drivers/net/wireless/hostap/hostap_cs.c +++ b/drivers/net/wireless/hostap/hostap_cs.c @@ -594,6 +594,7 @@ static int prism2_config(struct pcmcia_device *link) local_info_t *local; int ret = 1; struct hostap_cs_priv *hw_priv; + unsigned long flags; PDEBUG(DEBUG_FLOW, "prism2_config()\n"); @@ -625,9 +626,15 @@ static int prism2_config(struct pcmcia_device *link) local->hw_priv = hw_priv; hw_priv->link = link; + /* + * Make sure the IRQ handler cannot proceed until at least + * dev->base_addr is initialized. + */ + spin_lock_irqsave(&local->irq_init_lock, flags); + ret = pcmcia_request_irq(link, prism2_interrupt); if (ret) - goto failed; + goto failed_unlock; /* * This actually configures the PCMCIA socket -- setting up @@ -636,11 +643,13 @@ static int prism2_config(struct pcmcia_device *link) */ ret = pcmcia_request_configuration(link, &link->conf); if (ret) - goto failed; + goto failed_unlock; dev->irq = link->irq; dev->base_addr = link->io.BasePort1; + spin_unlock_irqrestore(&local->irq_init_lock, flags); + /* Finally, report what we've done */ printk(KERN_INFO "%s: index 0x%02x: ", dev_info, link->conf.ConfigIndex); @@ -667,6 +676,8 @@ static int prism2_config(struct pcmcia_device *link) return ret; + failed_unlock: + spin_unlock_irqrestore(&local->irq_init_lock, flags); failed: kfree(hw_priv); prism2_release((u_long)link); diff --git a/drivers/net/wireless/hostap/hostap_hw.c b/drivers/net/wireless/hostap/hostap_hw.c index ff9b5c882184..2f999fc94f60 100644 --- a/drivers/net/wireless/hostap/hostap_hw.c +++ b/drivers/net/wireless/hostap/hostap_hw.c @@ -2621,6 +2621,18 @@ static irqreturn_t prism2_interrupt(int irq, void *dev_id) iface = netdev_priv(dev); local = iface->local; + /* Detect early interrupt before driver is fully configued */ + spin_lock(&local->irq_init_lock); + if (!dev->base_addr) { + if (net_ratelimit()) { + printk(KERN_DEBUG "%s: Interrupt, but dev not configured\n", + dev->name); + } + spin_unlock(&local->irq_init_lock); + return IRQ_HANDLED; + } + spin_unlock(&local->irq_init_lock); + prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INTERRUPT, 0, 0); if (local->func->card_present && !local->func->card_present(local)) { @@ -3138,6 +3150,7 @@ prism2_init_local_data(struct prism2_helper_functions *funcs, int card_idx, spin_lock_init(&local->cmdlock); spin_lock_init(&local->baplock); spin_lock_init(&local->lock); + spin_lock_init(&local->irq_init_lock); mutex_init(&local->rid_bap_mtx); if (card_idx < 0 || card_idx >= MAX_PARM_DEVICES) diff --git a/drivers/net/wireless/hostap/hostap_wlan.h b/drivers/net/wireless/hostap/hostap_wlan.h index 3d238917af07..1ba33be98b25 100644 --- a/drivers/net/wireless/hostap/hostap_wlan.h +++ b/drivers/net/wireless/hostap/hostap_wlan.h @@ -654,7 +654,7 @@ struct local_info { rwlock_t iface_lock; /* hostap_interfaces read lock; use write lock * when removing entries from the list. * TX and RX paths can use read lock. */ - spinlock_t cmdlock, baplock, lock; + spinlock_t cmdlock, baplock, lock, irq_init_lock; struct mutex rid_bap_mtx; u16 infofid; /* MAC buffer id for info frame */ /* txfid, intransmitfid, next_txtid, and next_alloc are protected by -- cgit v1.2.2 From 44b496f685ca68c0d96eb3ad88e3948fad3417d6 Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Fri, 11 Jun 2010 04:44:55 +0000 Subject: pcmcia: dev_node removal bugfix Patch c7c2fa07 removed one line too much from smc91c92_cs.c. Reported-by: Komuro CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org Signed-off-by: Dominik Brodowski Signed-off-by: David S. Miller --- drivers/net/pcmcia/smc91c92_cs.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c index 7b6fe89f9db0..64e6a84bbbbe 100644 --- a/drivers/net/pcmcia/smc91c92_cs.c +++ b/drivers/net/pcmcia/smc91c92_cs.c @@ -322,6 +322,7 @@ static int smc91c92_probe(struct pcmcia_device *link) return -ENOMEM; smc = netdev_priv(dev); smc->p_dev = link; + link->priv = dev; spin_lock_init(&smc->lock); link->io.NumPorts1 = 16; -- cgit v1.2.2 From bf445080dad9542c6bc6b693d941cae89605134c Mon Sep 17 00:00:00 2001 From: Amit Kumar Salecha Date: Sun, 13 Jun 2010 23:39:03 +0000 Subject: netxen: fix memory leaks in error path Fixes memory leak in error path when memory allocation for adapter data structures fails. Signed-off-by: Amit Kumar Salecha Signed-off-by: David S. Miller --- drivers/net/netxen/netxen_nic_ctx.c | 3 ++- drivers/net/netxen/netxen_nic_init.c | 4 ++-- 2 files changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/netxen/netxen_nic_ctx.c b/drivers/net/netxen/netxen_nic_ctx.c index f26e54716c88..3a41b6a84a68 100644 --- a/drivers/net/netxen/netxen_nic_ctx.c +++ b/drivers/net/netxen/netxen_nic_ctx.c @@ -629,7 +629,8 @@ int netxen_alloc_hw_resources(struct netxen_adapter *adapter) if (addr == NULL) { dev_err(&pdev->dev, "%s: failed to allocate tx desc ring\n", netdev->name); - return -ENOMEM; + err = -ENOMEM; + goto err_out_free; } tx_ring->desc_head = (struct cmd_desc_type0 *)addr; diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c index 045a7c8f5bdf..e08527f4b301 100644 --- a/drivers/net/netxen/netxen_nic_init.c +++ b/drivers/net/netxen/netxen_nic_init.c @@ -218,7 +218,7 @@ int netxen_alloc_sw_resources(struct netxen_adapter *adapter) if (cmd_buf_arr == NULL) { dev_err(&pdev->dev, "%s: failed to allocate cmd buffer ring\n", netdev->name); - return -ENOMEM; + goto err_out; } memset(cmd_buf_arr, 0, TX_BUFF_RINGSIZE(tx_ring)); tx_ring->cmd_buf_arr = cmd_buf_arr; @@ -230,7 +230,7 @@ int netxen_alloc_sw_resources(struct netxen_adapter *adapter) if (rds_ring == NULL) { dev_err(&pdev->dev, "%s: failed to allocate rds ring struct\n", netdev->name); - return -ENOMEM; + goto err_out; } recv_ctx->rds_rings = rds_ring; -- cgit v1.2.2 From 2227bae22becb88b75ede022c7bb991aabfb50bb Mon Sep 17 00:00:00 2001 From: Amit Kumar Salecha Date: Sun, 13 Jun 2010 23:39:04 +0000 Subject: netxen: fix rcv buffer leak Rcv producer should be read in spin-lock. Signed-off-by: Amit Kumar Salecha Signed-off-by: David S. Miller --- drivers/net/netxen/netxen_nic_init.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c index e08527f4b301..c865dda2adf1 100644 --- a/drivers/net/netxen/netxen_nic_init.c +++ b/drivers/net/netxen/netxen_nic_init.c @@ -1805,9 +1805,10 @@ netxen_post_rx_buffers(struct netxen_adapter *adapter, u32 ringid, netxen_ctx_msg msg = 0; struct list_head *head; + spin_lock(&rds_ring->lock); + producer = rds_ring->producer; - spin_lock(&rds_ring->lock); head = &rds_ring->free_list; while (!list_empty(head)) { @@ -1829,7 +1830,6 @@ netxen_post_rx_buffers(struct netxen_adapter *adapter, u32 ringid, producer = get_next_index(producer, rds_ring->num_desc); } - spin_unlock(&rds_ring->lock); if (count) { rds_ring->producer = producer; @@ -1853,6 +1853,8 @@ netxen_post_rx_buffers(struct netxen_adapter *adapter, u32 ringid, NETXEN_RCV_PRODUCER_OFFSET), msg); } } + + spin_unlock(&rds_ring->lock); } static void @@ -1864,10 +1866,11 @@ netxen_post_rx_buffers_nodb(struct netxen_adapter *adapter, int producer, count = 0; struct list_head *head; - producer = rds_ring->producer; if (!spin_trylock(&rds_ring->lock)) return; + producer = rds_ring->producer; + head = &rds_ring->free_list; while (!list_empty(head)) { -- cgit v1.2.2 From 7e43cd66d36e8f0900e87d9d287c9ee649cbdd07 Mon Sep 17 00:00:00 2001 From: Amit Kumar Salecha Date: Sun, 13 Jun 2010 23:39:05 +0000 Subject: netxen: fix caching window register CRB window register is not per pci-func for NX3031, so caching can result in incorrect values. Signed-off-by: Amit Kumar Salecha Signed-off-by: David S. Miller --- drivers/net/netxen/netxen_nic_hw.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c index 5c496f8d7c49..29d7b93d0493 100644 --- a/drivers/net/netxen/netxen_nic_hw.c +++ b/drivers/net/netxen/netxen_nic_hw.c @@ -1159,9 +1159,6 @@ netxen_nic_pci_set_crbwindow_2M(struct netxen_adapter *adapter, ulong off) window = CRB_HI(off); - if (adapter->ahw.crb_win == window) - return; - writel(window, addr); if (readl(addr) != window) { if (printk_ratelimit()) @@ -1169,7 +1166,6 @@ netxen_nic_pci_set_crbwindow_2M(struct netxen_adapter *adapter, ulong off) "failed to set CRB window to %d off 0x%lx\n", window, off); } - adapter->ahw.crb_win = window; } static void __iomem * -- cgit v1.2.2 From 97553f7f3e7a0305d017df9cc6e9589f64878437 Mon Sep 17 00:00:00 2001 From: Manfred Rudigier Date: Fri, 11 Jun 2010 01:49:05 +0000 Subject: gianfar: Fix setup of RX time stamping Previously the RCTRL_TS_ENABLE bit was set unconditionally. However, if the RCTRL_TS_ENABLE is set without TMR_CTRL[TE], the driver does not work properly on some boards (Anton had problems with the MPC8313ERDB and MPC8568EMDS). With this patch the bit will only be set if requested from user space with the SIOCSHWTSTAMP ioctl command, meaning that time stamping is disabled during normal operation. Users who are not interested in time stamps will not experience problems with buggy CPU revisions or performance drops any more. The setting of TMR_CTRL[TE] is still up to the user. This is considered safe because users wanting HW timestamps must initialize the eTSEC clock first anyway, e.g. with the recently submitted PTP clock driver. Signed-off-by: Manfred Rudigier Reviewed-by: Anton Vorontsov Signed-off-by: David S. Miller --- drivers/net/gianfar.c | 21 +++++++++++++++++---- 1 file changed, 17 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 46c69cd06553..227b628bc214 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -381,10 +381,14 @@ static void gfar_init_mac(struct net_device *ndev) /* Insert receive time stamps into padding alignment bytes */ if (priv->device_flags & FSL_GIANFAR_DEV_HAS_TIMER) { rctrl &= ~RCTRL_PAL_MASK; - rctrl |= RCTRL_PRSDEP_INIT | RCTRL_TS_ENABLE | RCTRL_PADDING(8); + rctrl |= RCTRL_PADDING(8); priv->padding = 8; } + /* Enable HW time stamping if requested from user space */ + if (priv->hwts_rx_en) + rctrl |= RCTRL_PRSDEP_INIT | RCTRL_TS_ENABLE; + /* keep vlan related bits if it's enabled */ if (priv->vlgrp) { rctrl |= RCTRL_VLEX | RCTRL_PRSDEP_INIT; @@ -747,7 +751,8 @@ static int gfar_of_init(struct of_device *ofdev, struct net_device **pdev) FSL_GIANFAR_DEV_HAS_CSUM | FSL_GIANFAR_DEV_HAS_VLAN | FSL_GIANFAR_DEV_HAS_MAGIC_PACKET | - FSL_GIANFAR_DEV_HAS_EXTENDED_HASH; + FSL_GIANFAR_DEV_HAS_EXTENDED_HASH | + FSL_GIANFAR_DEV_HAS_TIMER; ctype = of_get_property(np, "phy-connection-type", NULL); @@ -805,12 +810,20 @@ static int gfar_hwtstamp_ioctl(struct net_device *netdev, switch (config.rx_filter) { case HWTSTAMP_FILTER_NONE: - priv->hwts_rx_en = 0; + if (priv->hwts_rx_en) { + stop_gfar(netdev); + priv->hwts_rx_en = 0; + startup_gfar(netdev); + } break; default: if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_TIMER)) return -ERANGE; - priv->hwts_rx_en = 1; + if (!priv->hwts_rx_en) { + stop_gfar(netdev); + priv->hwts_rx_en = 1; + startup_gfar(netdev); + } config.rx_filter = HWTSTAMP_FILTER_ALL; break; } -- cgit v1.2.2 From 756725064fe6abbcdb43b1e64d017649b828be35 Mon Sep 17 00:00:00 2001 From: Don Skidmore Date: Tue, 15 Jun 2010 09:23:17 +0000 Subject: ixgbe: add comment on SFP+ ID for Active DA These comments were forgotten in the initial patch to add this functionality. This patch corrects that. Signed-off-by: Don Skidmore Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_phy.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c index 09e1911ff510..48325a5beff2 100644 --- a/drivers/net/ixgbe/ixgbe_phy.c +++ b/drivers/net/ixgbe/ixgbe_phy.c @@ -575,6 +575,8 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) * 4 SFP_DA_CORE1 - 82599-specific * 5 SFP_SR/LR_CORE0 - 82599-specific * 6 SFP_SR/LR_CORE1 - 82599-specific + * 7 SFP_act_lmt_DA_CORE0 - 82599-specific + * 8 SFP_act_lmt_DA_CORE1 - 82599-specific */ if (hw->mac.type == ixgbe_mac_82598EB) { if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) -- cgit v1.2.2 From a91fb143de61dce847e319ca79b9937a665ad622 Mon Sep 17 00:00:00 2001 From: Jan-Bernd Themann Date: Tue, 15 Jun 2010 05:35:16 +0000 Subject: ehea: fix delayed packet processing In the eHEA poll function an rmb() is required. Without that some packets on the receive queue are not seen and thus delayed until the next interrupt is handled for the same receive queue. Signed-off-by: Jan-Bernd Themann Signed-off-by: Jay Vosburgh Signed-off-by: David S. Miller --- drivers/net/ehea/ehea_main.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c index f547894ff48f..fd890faf5174 100644 --- a/drivers/net/ehea/ehea_main.c +++ b/drivers/net/ehea/ehea_main.c @@ -867,6 +867,7 @@ static int ehea_poll(struct napi_struct *napi, int budget) ehea_reset_cq_ep(pr->send_cq); ehea_reset_cq_n1(pr->recv_cq); ehea_reset_cq_n1(pr->send_cq); + rmb(); cqe = ehea_poll_rq1(pr->qp, &wqe_index); cqe_skb = ehea_poll_cq(pr->send_cq); -- cgit v1.2.2 From 099473c16bac7b936994bc95b5fd96f36397e1ad Mon Sep 17 00:00:00 2001 From: Jan-Bernd Themann Date: Tue, 15 Jun 2010 05:35:42 +0000 Subject: ehea: Fix kernel deadlock in DLPAR-mem processing Port reset operations and memory add/remove operations need to be serialized to avoid a kernel deadlock. The deadlock is caused by calling the napi_disable() function twice. Therefore we have to employ the dlpar_mem_lock in the ehea_reset_port function as well Signed-off-by: Jan-Bernd Themann Signed-off-by: David S. Miller --- drivers/net/ehea/ehea.h | 2 +- drivers/net/ehea/ehea_main.c | 8 +++----- 2 files changed, 4 insertions(+), 6 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h index 0630980a2722..0060e422f171 100644 --- a/drivers/net/ehea/ehea.h +++ b/drivers/net/ehea/ehea.h @@ -40,7 +40,7 @@ #include #define DRV_NAME "ehea" -#define DRV_VERSION "EHEA_0103" +#define DRV_VERSION "EHEA_0105" /* eHEA capability flags */ #define DLPAR_PORT_ADD_REM 1 diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c index fd890faf5174..8b92acb448c2 100644 --- a/drivers/net/ehea/ehea_main.c +++ b/drivers/net/ehea/ehea_main.c @@ -2860,6 +2860,7 @@ static void ehea_reset_port(struct work_struct *work) container_of(work, struct ehea_port, reset_task); struct net_device *dev = port->netdev; + mutex_lock(&dlpar_mem_lock); port->resets++; mutex_lock(&port->port_lock); netif_stop_queue(dev); @@ -2882,6 +2883,7 @@ static void ehea_reset_port(struct work_struct *work) netif_wake_queue(dev); out: mutex_unlock(&port->port_lock); + mutex_unlock(&dlpar_mem_lock); } static void ehea_rereg_mrs(struct work_struct *work) @@ -3543,10 +3545,7 @@ static int ehea_mem_notifier(struct notifier_block *nb, int ret = NOTIFY_BAD; struct memory_notify *arg = data; - if (!mutex_trylock(&dlpar_mem_lock)) { - ehea_info("ehea_mem_notifier must not be called parallelized"); - goto out; - } + mutex_lock(&dlpar_mem_lock); switch (action) { case MEM_CANCEL_OFFLINE: @@ -3575,7 +3574,6 @@ static int ehea_mem_notifier(struct notifier_block *nb, out_unlock: mutex_unlock(&dlpar_mem_lock); -out: return ret; } -- cgit v1.2.2 From 63b88b9041ceef8217f34de71a2e96f0c3f0fd3b Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Fri, 11 Jun 2010 10:51:03 +0000 Subject: gianfar: Fix oversized packets handling Issuing the following command on host: $ ifconfig eth2 mtu 1600 ; ping 10.0.0.27 -s 1485 -c 1 Makes some boards (tested with MPC8315 rev 1.1 and MPC8313 rev 1.0) oops like this: skb_over_panic: text:c0195914 len:1537 put:1537 head:c79e4800 data:c79e4880 tail:0xc79e4e81 end:0xc79e4e80 dev:eth1 ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:127! Oops: Exception in kernel mode, sig: 5 [#1] MPC831x RDB last sysfs file: /sys/kernel/uevent_seqnum Modules linked in: NIP: c01c1840 LR: c01c1840 CTR: c016d918 [...] NIP [c01c1840] skb_over_panic+0x48/0x5c LR [c01c1840] skb_over_panic+0x48/0x5c Call Trace: [c0339d50] [c01c1840] skb_over_panic+0x48/0x5c (unreliable) [c0339d60] [c01c3020] skb_put+0x5c/0x60 [c0339d70] [c0195914] gfar_clean_rx_ring+0x25c/0x3d0 [c0339dc0] [c01976e8] gfar_poll+0x170/0x1bc Dumped buffer descriptors showed that eTSEC's length/truncation logic sometimes passes oversized packets, i.e. for the above ICMP packet the following two buffer descriptors may become ready: status=1400 length=1536 status=1800 length=1541 So, it seems that gianfar actually receives the whole big frame, and it tries to place the packet into two BDs. This situation confuses the driver, and so the skb_put() sanity check fails. This patch fixes the issue by adding an appropriate check, i.e. the driver should not try to process frames with buffer descriptor's length over rx_buffer_size (i.e. maxfrm and mrblr). Note that sometimes eTSEC works correctly, i.e. in the second (last) buffer descriptor bits 'truncated' and 'crcerr' are set, and so there's no oops. Though I couldn't find any logic when it works correctly and when not. Signed-off-by: Anton Vorontsov Signed-off-by: David S. Miller --- drivers/net/gianfar.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 227b628bc214..28b53d1cd4f1 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -2655,6 +2655,10 @@ int gfar_clean_rx_ring(struct gfar_priv_rx_q *rx_queue, int rx_work_limit) dma_unmap_single(&priv->ofdev->dev, bdp->bufPtr, priv->rx_buffer_size, DMA_FROM_DEVICE); + if (unlikely(!(bdp->status & RXBD_ERR) && + bdp->length > priv->rx_buffer_size)) + bdp->status = RXBD_LARGE; + /* We drop the frame if we failed to allocate a new buffer */ if (unlikely(!newskb || !(bdp->status & RXBD_LAST) || bdp->status & RXBD_ERR)) { -- cgit v1.2.2 From 8b1d920fa5ea8e3d941e908fa57acc9b1df9ca92 Mon Sep 17 00:00:00 2001 From: Ken Kawasaki Date: Sat, 12 Jun 2010 00:17:28 +0000 Subject: pcnet_cs: add new id (TOSHIBA Modem/LAN Card) pcnet_cs: serial_cs: add new id (TOSHIBA Modem/LAN Card) Signed-off-by: Ken Kawasaki Signed-off-by: David S. Miller --- drivers/net/pcmcia/pcnet_cs.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index 6f77a768ba88..bfdef72c5d5e 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -1727,6 +1727,7 @@ static struct pcmcia_device_id pcnet_ids[] = { PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "cis/PCMLM28.cis"), PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "cis/PCMLM28.cis"), PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "cis/PCMLM28.cis"), + PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "TOSHIBA", "Modem/LAN Card", 0xb4585a1a, 0x53f922f8, "cis/PCMLM28.cis"), PCMCIA_MFC_DEVICE_CIS_PROD_ID12(0, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "cis/DP83903.cis"), PCMCIA_MFC_DEVICE_CIS_PROD_ID4(0, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"), PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0175, 0x0000, "cis/DP83903.cis"), -- cgit v1.2.2 From db176edc89abbf22e6db6853f8581f9475fe8ec1 Mon Sep 17 00:00:00 2001 From: Sergey Matyukevich Date: Mon, 14 Jun 2010 06:35:20 +0000 Subject: ucc_geth: fix for RX skb buffers recycling This patch implements a proper modification of RX skb buffers before recycling. Adjusting only skb->data is not enough because after that skb->tail and skb->len become incorrect. Signed-off-by: Sergey Matyukevich Signed-off-by: David S. Miller --- drivers/net/ucc_geth.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c index 4a34833b85dd..807470e156af 100644 --- a/drivers/net/ucc_geth.c +++ b/drivers/net/ucc_geth.c @@ -3215,6 +3215,8 @@ static int ucc_geth_rx(struct ucc_geth_private *ugeth, u8 rxQ, int rx_work_limit __func__, __LINE__, (u32) skb); if (skb) { skb->data = skb->head + NET_SKB_PAD; + skb->len = 0; + skb_reset_tail_pointer(skb); __skb_queue_head(&ugeth->rx_recycle, skb); } -- cgit v1.2.2 From aabef8b240880439b91574c9a9e33dcc44bfd8c7 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Thu, 17 Jun 2010 08:56:05 -0700 Subject: bnx2: fix dma_get_ops compilation breakage This removes dma_get_ops() prefetch optimization in bnx2. bnx2 uses dma_get_ops() to see if dma_sync_single_for_cpu() is noop. bnx2 does prefetch if it's noop. But dma_get_ops() isn't available on all the architectures (only the architectures that uses dma_map_ops struct have it). Using dma_get_ops() in drivers leads to compilation breakage on many architectures. This patch removes dma_get_ops() and changes bnx2 to do prefetch on all the architectures. This adds useless prefetch on non-coherent architectures but this is harmless. It is also unlikely to cause the performance drop. [ Remove now unused local variable 'pdev' -DaveM ] Signed-off-by: FUJITA Tomonori Acked-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/bnx2.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index 949d7a9dcf92..117432222a09 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -3073,7 +3073,6 @@ bnx2_rx_int(struct bnx2 *bp, struct bnx2_napi *bnapi, int budget) u16 hw_cons, sw_cons, sw_ring_cons, sw_prod, sw_ring_prod; struct l2_fhdr *rx_hdr; int rx_pkt = 0, pg_ring_used = 0; - struct pci_dev *pdev = bp->pdev; hw_cons = bnx2_get_hw_rx_cons(bnapi); sw_cons = rxr->rx_cons; @@ -3099,12 +3098,10 @@ bnx2_rx_int(struct bnx2 *bp, struct bnx2_napi *bnapi, int budget) skb = rx_buf->skb; prefetchw(skb); - if (!get_dma_ops(&pdev->dev)->sync_single_for_cpu) { - next_rx_buf = - &rxr->rx_buf_ring[ - RX_RING_IDX(NEXT_RX_BD(sw_cons))]; - prefetch(next_rx_buf->desc); - } + next_rx_buf = + &rxr->rx_buf_ring[RX_RING_IDX(NEXT_RX_BD(sw_cons))]; + prefetch(next_rx_buf->desc); + rx_buf->skb = NULL; dma_addr = dma_unmap_addr(rx_buf, mapping); -- cgit v1.2.2 From b6855772f4a22c4fbdd4fcaceff5c8a527035123 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Fri, 18 Jun 2010 13:15:23 -0400 Subject: ath5k: initialize ah->ah_current_channel ath5k assumes ah_current_channel is always a valid pointer in several places, but a newly created interface may not have a channel. To avoid null pointer dereferences, set it up to point to the first available channel until later reconfigured. This fixes the following oops: $ rmmod ath5k $ insmod ath5k $ iw phy0 set distance 11000 BUG: unable to handle kernel NULL pointer dereference at 00000006 IP: [] ath5k_hw_set_coverage_class+0x74/0x1b0 [ath5k] *pde = 00000000 Oops: 0000 [#1] last sysfs file: /sys/devices/pci0000:00/0000:00:0e.0/ieee80211/phy0/index Modules linked in: usbhid option usb_storage usbserial usblp evdev lm90 scx200_acb i2c_algo_bit i2c_dev i2c_core via_rhine ohci_hcd ne2k_pci 8390 leds_alix2 xt_IMQ imq nf_nat_tftp nf_conntrack_tftp nf_nat_irc nf_cc Pid: 1597, comm: iw Not tainted (2.6.32.14 #8) EIP: 0060:[] EFLAGS: 00010296 CPU: 0 EIP is at ath5k_hw_set_coverage_class+0x74/0x1b0 [ath5k] EAX: 000000c2 EBX: 00000000 ECX: ffffffff EDX: c12d2080 ESI: 00000019 EDI: cf8c0000 EBP: d0a30edc ESP: cfa09bf4 DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 Process iw (pid: 1597, ti=cfa09000 task=cf88a000 task.ti=cfa09000) Stack: d0a34f35 d0a353f8 d0a30edc 000000fe cf8c0000 00000000 1900063d cfa8c9e0 <0> cfa8c9e8 cfa8c0c0 cfa8c000 d0a27f0c 199d84b4 cfa8c200 00000010 d09bfdc7 <0> 00000000 00000000 ffffffff d08e0d28 cf9263c0 00000001 cfa09cc4 00000000 Call Trace: [] ? ath5k_hw_attach+0xc8c/0x3c10 [ath5k] [] ? __ieee80211_request_smps+0x1347/0x1580 [mac80211] [] ? nl80211_send_scan_start+0x7b8/0x4520 [cfg80211] [] ? nla_parse+0x59/0xc0 [] ? genl_rcv_msg+0x169/0x1a0 [] ? genl_rcv_msg+0x0/0x1a0 [] ? netlink_rcv_skb+0x38/0x90 [] ? genl_rcv+0x19/0x30 [] ? netlink_unicast+0x1b3/0x220 [] ? netlink_sendmsg+0x26e/0x290 [] ? sock_sendmsg+0xbe/0xf0 [] ? autoremove_wake_function+0x0/0x50 [] ? __alloc_pages_nodemask+0x106/0x530 [] ? do_lookup+0x53/0x1b0 [] ? __link_path_walk+0x9b9/0x9e0 [] ? verify_iovec+0x50/0x90 [] ? sys_sendmsg+0x1e1/0x270 [] ? find_get_page+0x10/0x50 [] ? filemap_fault+0x5f/0x370 [] ? __do_fault+0x319/0x370 [] ? sys_socketcall+0x244/0x290 [] ? do_page_fault+0x1ec/0x270 [] ? do_page_fault+0x0/0x270 [] ? syscall_call+0x7/0xb Code: 00 b8 fe 00 00 00 b9 f8 53 a3 d0 89 5c 24 14 89 7c 24 10 89 44 24 0c 89 6c 24 08 89 4c 24 04 c7 04 24 35 4f a3 d0 e8 7c 30 60 f0 <0f> b7 43 06 ba 06 00 00 00 a8 10 75 0e 83 e0 20 83 f8 01 19 d2 EIP: [] ath5k_hw_set_coverage_class+0x74/0x1b0 [ath5k] SS:ESP 0068:cfa09bf4 CR2: 0000000000000006 ---[ end trace 54f73d6b10ceb87b ]--- Cc: stable@kernel.org Reported-by: Steve Brown Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/attach.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath5k/attach.c b/drivers/net/wireless/ath/ath5k/attach.c index e0c244b02f05..31c008042bfe 100644 --- a/drivers/net/wireless/ath/ath5k/attach.c +++ b/drivers/net/wireless/ath/ath5k/attach.c @@ -126,6 +126,7 @@ int ath5k_hw_attach(struct ath5k_softc *sc) ah->ah_ant_mode = AR5K_ANTMODE_DEFAULT; ah->ah_noise_floor = -95; /* until first NF calibration is run */ sc->ani_state.ani_mode = ATH5K_ANI_MODE_AUTO; + ah->ah_current_channel = &sc->channels[0]; /* * Find the mac version -- cgit v1.2.2 From ade2d3db21b0625f9528bcd6f1656dd7c8d0fe08 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 21 Jun 2010 03:44:50 +0000 Subject: NET: MIPSsim: Fix modpost warning. $ make CONFIG_DEBUG_SECTION_MISMATCH=y [...] WARNING: drivers/net/built-in.o(.data+0x0): Section mismatch in reference from the variable mipsnet_driver to the function .init.text:mipsnet_probe() The variable mipsnet_driver references the function __init mipsnet_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, [...] Fixed by making mipsnet_probe __devinit. Signed-off-by: Ralf Baechle drivers/net/mipsnet.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) Signed-off-by: David S. Miller --- drivers/net/mipsnet.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/mipsnet.c b/drivers/net/mipsnet.c index 8e9704f5c122..869f0ea43a5b 100644 --- a/drivers/net/mipsnet.c +++ b/drivers/net/mipsnet.c @@ -247,7 +247,7 @@ static const struct net_device_ops mipsnet_netdev_ops = { .ndo_set_mac_address = eth_mac_addr, }; -static int __init mipsnet_probe(struct platform_device *dev) +static int __devinit mipsnet_probe(struct platform_device *dev) { struct net_device *netdev; int err; -- cgit v1.2.2 From 13fea6d4f73942e6961aec97ba4c593619d18f6f Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Mon, 21 Jun 2010 13:50:18 -0700 Subject: lasi82596: fix netdev_mc_count conversion Fix commit 4cd24eaf0 (net: use netdev_mc_count and netdev_mc_empty when appropriate) Signed-off-by: Helge Deller Signed-off-by: David S. Miller --- drivers/net/lib82596.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/lib82596.c b/drivers/net/lib82596.c index ce5d6e909218..c27f4291b350 100644 --- a/drivers/net/lib82596.c +++ b/drivers/net/lib82596.c @@ -1343,7 +1343,7 @@ static void set_multicast_list(struct net_device *dev) DEB(DEB_MULTI, printk(KERN_DEBUG "%s: set multicast list, %d entries, promisc %s, allmulti %s\n", - dev->name, dev->mc_count, + dev->name, netdev_mc_count(dev), dev->flags & IFF_PROMISC ? "ON" : "OFF", dev->flags & IFF_ALLMULTI ? "ON" : "OFF")); -- cgit v1.2.2 From d5dc0ae4df9db00b8122378d56a071039b17a1eb Mon Sep 17 00:00:00 2001 From: Filip Aben Date: Tue, 22 Jun 2010 10:10:35 -0700 Subject: hso: remove setting of low_latency flag This patch removes the setting of the low_latency flag. tty_flip_buffer_push() is occasionally being called in irq context, which causes a hang if the low_latency flag is set. Removing the low_latency flag only seems to impact the flush to ldisc, which will now be put on a workqueue. Signed-off-by: Filip Aben Signed-off-by: David S. Miller --- drivers/net/usb/hso.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index 0a3c41faea9c..4dd23513c5af 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -1334,7 +1334,6 @@ static int hso_serial_open(struct tty_struct *tty, struct file *filp) /* check for port already opened, if not set the termios */ serial->open_count++; if (serial->open_count == 1) { - tty->low_latency = 1; serial->rx_state = RX_IDLE; /* Force default termio settings */ _hso_serial_set_termios(tty, NULL); -- cgit v1.2.2 From 06aeb78b85d8c04af03eb37353aa0df98d3db170 Mon Sep 17 00:00:00 2001 From: Anirban Chakraborty Date: Wed, 23 Jun 2010 11:49:42 -0700 Subject: net: add dependency on fw class module to qlcnic and netxen_nic netxen_nic and qlcnic driver depends on firmware_class module. Signed-off-by: Anirban Chakraborty Signed-off-by: Amit Kumar Salecha Signed-off-by: David S. Miller --- drivers/net/Kconfig | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 2decc597bda7..ce2fcdd4ab90 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2754,6 +2754,7 @@ config MYRI10GE_DCA config NETXEN_NIC tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC" depends on PCI + select FW_LOADER help This enables the support for NetXen's Gigabit Ethernet card. @@ -2819,6 +2820,7 @@ config BNX2X config QLCNIC tristate "QLOGIC QLCNIC 1/10Gb Converged Ethernet NIC Support" depends on PCI + select FW_LOADER help This driver supports QLogic QLE8240 and QLE8242 Converged Ethernet devices. -- cgit v1.2.2 From 6b2a541db58dba5860ccbcfaf36caee064b8a9fd Mon Sep 17 00:00:00 2001 From: Dmitry Kravkov Date: Wed, 23 Jun 2010 11:57:09 -0700 Subject: cnic: Disable statistics initialization for eth clients that do not support statistics Disable statistics initialization for eth clients that do not support statistics. This prevents memory corruption on bnx2x hw. Signed-off-by: Dmitry Kravkov Signed-off-by: Michael Chan Signed-off-by: Eilon Greenstein --- drivers/net/cnic.c | 55 +++++++++++++++++++++++++++++++++--------------------- 1 file changed, 34 insertions(+), 21 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/cnic.c b/drivers/net/cnic.c index fe925663d39a..80471269977a 100644 --- a/drivers/net/cnic.c +++ b/drivers/net/cnic.c @@ -3919,8 +3919,9 @@ static void cnic_init_bnx2x_tx_ring(struct cnic_dev *dev) HC_INDEX_DEF_C_ETH_ISCSI_CQ_CONS; context->cstorm_st_context.status_block_id = BNX2X_DEF_SB_ID; - context->xstorm_st_context.statistics_data = (cli | - XSTORM_ETH_ST_CONTEXT_STATISTICS_ENABLE); + if (cli < MAX_X_STAT_COUNTER_ID) + context->xstorm_st_context.statistics_data = cli | + XSTORM_ETH_ST_CONTEXT_STATISTICS_ENABLE; context->xstorm_ag_context.cdu_reserved = CDU_RSRVD_VALUE_TYPE_A(BNX2X_HW_CID(BNX2X_ISCSI_L2_CID, func), @@ -3928,10 +3929,12 @@ static void cnic_init_bnx2x_tx_ring(struct cnic_dev *dev) ETH_CONNECTION_TYPE); /* reset xstorm per client statistics */ - val = BAR_XSTRORM_INTMEM + - XSTORM_PER_COUNTER_ID_STATS_OFFSET(port, cli); - for (i = 0; i < sizeof(struct xstorm_per_client_stats) / 4; i++) - CNIC_WR(dev, val + i * 4, 0); + if (cli < MAX_X_STAT_COUNTER_ID) { + val = BAR_XSTRORM_INTMEM + + XSTORM_PER_COUNTER_ID_STATS_OFFSET(port, cli); + for (i = 0; i < sizeof(struct xstorm_per_client_stats) / 4; i++) + CNIC_WR(dev, val + i * 4, 0); + } cp->tx_cons_ptr = &cp->bnx2x_def_status_blk->c_def_status_block.index_values[ @@ -3978,9 +3981,11 @@ static void cnic_init_bnx2x_rx_ring(struct cnic_dev *dev) BNX2X_ISCSI_RX_SB_INDEX_NUM; context->ustorm_st_context.common.clientId = cli; context->ustorm_st_context.common.status_block_id = BNX2X_DEF_SB_ID; - context->ustorm_st_context.common.flags = - USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_STATISTICS; - context->ustorm_st_context.common.statistics_counter_id = cli; + if (cli < MAX_U_STAT_COUNTER_ID) { + context->ustorm_st_context.common.flags = + USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_STATISTICS; + context->ustorm_st_context.common.statistics_counter_id = cli; + } context->ustorm_st_context.common.mc_alignment_log_size = 0; context->ustorm_st_context.common.bd_buff_size = cp->l2_single_buf_size; @@ -4011,10 +4016,13 @@ static void cnic_init_bnx2x_rx_ring(struct cnic_dev *dev) /* client tstorm info */ tstorm_client.mtu = cp->l2_single_buf_size - 14; - tstorm_client.config_flags = - (TSTORM_ETH_CLIENT_CONFIG_E1HOV_REM_ENABLE | - TSTORM_ETH_CLIENT_CONFIG_STATSITICS_ENABLE); - tstorm_client.statistics_counter_id = cli; + tstorm_client.config_flags = TSTORM_ETH_CLIENT_CONFIG_E1HOV_REM_ENABLE; + + if (cli < MAX_T_STAT_COUNTER_ID) { + tstorm_client.config_flags |= + TSTORM_ETH_CLIENT_CONFIG_STATSITICS_ENABLE; + tstorm_client.statistics_counter_id = cli; + } CNIC_WR(dev, BAR_TSTRORM_INTMEM + TSTORM_CLIENT_CONFIG_OFFSET(port, cli), @@ -4024,16 +4032,21 @@ static void cnic_init_bnx2x_rx_ring(struct cnic_dev *dev) ((u32 *)&tstorm_client)[1]); /* reset tstorm per client statistics */ - val = BAR_TSTRORM_INTMEM + - TSTORM_PER_COUNTER_ID_STATS_OFFSET(port, cli); - for (i = 0; i < sizeof(struct tstorm_per_client_stats) / 4; i++) - CNIC_WR(dev, val + i * 4, 0); + if (cli < MAX_T_STAT_COUNTER_ID) { + + val = BAR_TSTRORM_INTMEM + + TSTORM_PER_COUNTER_ID_STATS_OFFSET(port, cli); + for (i = 0; i < sizeof(struct tstorm_per_client_stats) / 4; i++) + CNIC_WR(dev, val + i * 4, 0); + } /* reset ustorm per client statistics */ - val = BAR_USTRORM_INTMEM + - USTORM_PER_COUNTER_ID_STATS_OFFSET(port, cli); - for (i = 0; i < sizeof(struct ustorm_per_client_stats) / 4; i++) - CNIC_WR(dev, val + i * 4, 0); + if (cli < MAX_U_STAT_COUNTER_ID) { + val = BAR_USTRORM_INTMEM + + USTORM_PER_COUNTER_ID_STATS_OFFSET(port, cli); + for (i = 0; i < sizeof(struct ustorm_per_client_stats) / 4; i++) + CNIC_WR(dev, val + i * 4, 0); + } cp->rx_cons_ptr = &cp->bnx2x_def_status_blk->u_def_status_block.index_values[ -- cgit v1.2.2 From 6c3118e2305326743acb52250bcfd0d52389d9dc Mon Sep 17 00:00:00 2001 From: Vasanthakumar Thiagarajan Date: Wed, 23 Jun 2010 06:49:21 -0700 Subject: ath9k: Fix bug in starting ani There are few places where ANI is started without checking if it is right to start. This might lead to a case where ani timer would be left undeleted and cause improper memory acccess during module unload. This bug is clearly exposed with paprd support where the driver detects tx hang and does a chip reset. During this reset ani is (re)started without checking if it needs to be started. This would leave a timer scheduled even after all the resources are freed and cause a panic. This patch introduces a bit in sc_flags to indicate if ani needs to be started in sw_scan_start() and ath_reset(). This would fix the following panic. This issue is easily seen with ar9003 + paprd. BUG: unable to handle kernel paging request at 0000000000003f38 [] ? __queue_work+0x41/0x50 [] run_timer_softirq+0x17a/0x370 [] ? tick_dev_program_event+0x48/0x110 [] __do_softirq+0xb9/0x1f0 [] ? handle_IRQ_event+0x50/0x160 [] call_softirq+0x1c/0x30 [] do_softirq+0x65/0xa0 [] irq_exit+0x85/0x90 [] do_IRQ+0x75/0xf0 [] ret_from_intr+0x0/0x11 [] ? acpi_idle_enter_simple+0xe4/0x119 [] ? acpi_idle_enter_simple+0xdd/0x119 [] cpuidle_idle_call+0xa7/0x140 [] cpu_idle+0xb3/0x110 [] start_secondary+0x1ee/0x1f5 Signed-off-by: Vasanthakumar Thiagarajan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ath9k.h | 1 + drivers/net/wireless/ath/ath9k/main.c | 11 ++++++++++- 2 files changed, 11 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index fbb7dec6ddeb..5ea87736a6ae 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -445,6 +445,7 @@ void ath_deinit_leds(struct ath_softc *sc); #define SC_OP_TSF_RESET BIT(11) #define SC_OP_BT_PRIORITY_DETECTED BIT(12) #define SC_OP_BT_SCAN BIT(13) +#define SC_OP_ANI_RUN BIT(14) /* Powersave flags */ #define PS_WAIT_FOR_BEACON BIT(0) diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index abfa0493236f..1e2a68ea9355 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -336,6 +336,10 @@ set_timer: static void ath_start_ani(struct ath_common *common) { unsigned long timestamp = jiffies_to_msecs(jiffies); + struct ath_softc *sc = (struct ath_softc *) common->priv; + + if (!(sc->sc_flags & SC_OP_ANI_RUN)) + return; common->ani.longcal_timer = timestamp; common->ani.shortcal_timer = timestamp; @@ -872,11 +876,13 @@ static void ath9k_bss_assoc_info(struct ath_softc *sc, /* Reset rssi stats */ sc->sc_ah->stats.avgbrssi = ATH_RSSI_DUMMY_MARKER; + sc->sc_flags |= SC_OP_ANI_RUN; ath_start_ani(common); } else { ath_print(common, ATH_DBG_CONFIG, "Bss Info DISASSOC\n"); common->curaid = 0; /* Stop ANI */ + sc->sc_flags &= ~SC_OP_ANI_RUN; del_timer_sync(&common->ani.timer); } } @@ -1478,8 +1484,10 @@ static int ath9k_add_interface(struct ieee80211_hw *hw, if (vif->type == NL80211_IFTYPE_AP || vif->type == NL80211_IFTYPE_ADHOC || - vif->type == NL80211_IFTYPE_MONITOR) + vif->type == NL80211_IFTYPE_MONITOR) { + sc->sc_flags |= SC_OP_ANI_RUN; ath_start_ani(common); + } out: mutex_unlock(&sc->mutex); @@ -1500,6 +1508,7 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw, mutex_lock(&sc->mutex); /* Stop ANI */ + sc->sc_flags &= ~SC_OP_ANI_RUN; del_timer_sync(&common->ani.timer); /* Reclaim beacon resources */ -- cgit v1.2.2 From 38000a94a902e94ca8b5498f7871c6316de8957a Mon Sep 17 00:00:00 2001 From: Brandon Philips Date: Wed, 16 Jun 2010 16:21:58 +0000 Subject: sky2: enable rx/tx in sky2_phy_reinit() sky2_phy_reinit is called by the ethtool helpers sky2_set_settings, sky2_nway_reset and sky2_set_pauseparam when netif_running. However, at the end of sky2_phy_init GM_GP_CTRL has GM_GPCR_RX_ENA and GM_GPCR_TX_ENA cleared. So, doing these commands causes the device to stop working: $ ethtool -r eth0 $ ethtool -A eth0 autoneg off Fix this issue by enabling Rx/Tx after running sky2_phy_init in sky2_phy_reinit. Signed-off-by: Brandon Philips Tested-by: Brandon Philips Cc: stable@kernel.org Tested-by: Mike McCormack Signed-off-by: David S. Miller --- drivers/net/sky2.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 2111c7bbf578..7985165e84fc 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -717,11 +717,24 @@ static void sky2_phy_power_down(struct sky2_hw *hw, unsigned port) sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); } +/* Enable Rx/Tx */ +static void sky2_enable_rx_tx(struct sky2_port *sky2) +{ + struct sky2_hw *hw = sky2->hw; + unsigned port = sky2->port; + u16 reg; + + reg = gma_read16(hw, port, GM_GP_CTRL); + reg |= GM_GPCR_RX_ENA | GM_GPCR_TX_ENA; + gma_write16(hw, port, GM_GP_CTRL, reg); +} + /* Force a renegotiation */ static void sky2_phy_reinit(struct sky2_port *sky2) { spin_lock_bh(&sky2->phy_lock); sky2_phy_init(sky2->hw, sky2->port); + sky2_enable_rx_tx(sky2); spin_unlock_bh(&sky2->phy_lock); } @@ -2040,7 +2053,6 @@ static void sky2_link_up(struct sky2_port *sky2) { struct sky2_hw *hw = sky2->hw; unsigned port = sky2->port; - u16 reg; static const char *fc_name[] = { [FC_NONE] = "none", [FC_TX] = "tx", @@ -2048,10 +2060,7 @@ static void sky2_link_up(struct sky2_port *sky2) [FC_BOTH] = "both", }; - /* enable Rx/Tx */ - reg = gma_read16(hw, port, GM_GP_CTRL); - reg |= GM_GPCR_RX_ENA | GM_GPCR_TX_ENA; - gma_write16(hw, port, GM_GP_CTRL, reg); + sky2_enable_rx_tx(sky2); gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK); -- cgit v1.2.2 From d1e89f37de2845db364ef6d67586cd882f86b557 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 18 Jun 2010 03:41:25 -0700 Subject: iwlwifi: fix multicast commit 3474ad635db371b0d8d0ee40086f15d223d5b6a4 Author: Johannes Berg Date: Thu Apr 29 04:43:05 2010 -0700 iwlwifi: apply filter flags directly broke multicast. The reason, it turns out, is that the code previously checked if ALLMULTI _changed_, which the new code no longer did, and normally it _never_ changes. Had somebody changed it manually, the code prior to my patch there would have been broken already. The reason is that we always, unconditionally, ask the device to pass up all multicast frames, but the new code made it depend on ALLMULTI which broke it since now we'd pass up multicast frames depending on the default filter in the device, which isn't necessarily what we want (since we don't program it right now). Fix this by simply not checking allmulti as we have allmulti behaviour enabled already anyway. Reported-by: Maxim Levitsky Tested-by: Maxim Levitsky Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/iwl-core.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 426e95567de3..5bbc5298ef96 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -1314,7 +1314,6 @@ void iwl_configure_filter(struct ieee80211_hw *hw, changed_flags, *total_flags); CHK(FIF_OTHER_BSS | FIF_PROMISC_IN_BSS, RXON_FILTER_PROMISC_MSK); - CHK(FIF_ALLMULTI, RXON_FILTER_ACCEPT_GRP_MSK); CHK(FIF_CONTROL, RXON_FILTER_CTL2HOST_MSK); CHK(FIF_BCN_PRBRESP_PROMISC, RXON_FILTER_BCON_AWARE_MSK); @@ -1329,6 +1328,12 @@ void iwl_configure_filter(struct ieee80211_hw *hw, mutex_unlock(&priv->mutex); + /* + * Receiving all multicast frames is always enabled by the + * default flags setup in iwl_connection_init_rx_config() + * since we currently do not support programming multicast + * filters into the device. + */ *total_flags &= FIF_OTHER_BSS | FIF_ALLMULTI | FIF_PROMISC_IN_BSS | FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL; } -- cgit v1.2.2 From 062bee448bd539580ef9f64efe50fdfe04eeb103 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Fri, 18 Jun 2010 11:33:17 -0700 Subject: iwlwifi: set TX_CMD_FLAG_PROT_REQUIRE_MSK in tx_flag When building tx command, always set TX_CMD_FLAG_PROT_REQUIRE_MSK for 5000 series and up. Without setting this bit the firmware will not examine the RTS/CTS setting and thus not send traffic with the appropriate protection. RTS/CTS is is required for HT traffic in a noisy environment where, without this setting, connections will stall on some hardware as documented in the patch that initially attempted to address this: commit 1152dcc28c66a74b5b3f1a3ede0aa6729bfd48e4 Author: Wey-Yi Guy Date: Fri Jan 15 13:42:58 2010 -0800 iwlwifi: Fix throughput stall issue in HT mode for 5000 Similar to 6000 and 1000 series, RTS/CTS is the recommended protection mechanism for 5000 series in HT mode based on the HW design. Using RTS/CTS will better protect the inner exchange from interference, especially in highly-congested environment, it also prevent uCode encounter TX FIFO underrun and other HT mode related performance issues. For 3945 and 4965, different flags are used for RTS/CTS or CTS-to-Self protection. Signed-off-by: Wey-Yi Guy Signed-off-by: Reinette Chatre --- drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c index 44ef5d93befc..01658cf82d39 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c @@ -212,11 +212,7 @@ static void iwlagn_chain_noise_reset(struct iwl_priv *priv) static void iwlagn_rts_tx_cmd_flag(struct ieee80211_tx_info *info, __le32 *tx_flags) { - if ((info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) || - (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT)) - *tx_flags |= TX_CMD_FLG_RTS_CTS_MSK; - else - *tx_flags &= ~TX_CMD_FLG_RTS_CTS_MSK; + *tx_flags |= TX_CMD_FLG_RTS_CTS_MSK; } /* Calc max signal level (dBm) among 3 possible receivers */ -- cgit v1.2.2 From 9735b7ef005aaef5e5905cddba893f8725cd8867 Mon Sep 17 00:00:00 2001 From: Ken Kawasaki Date: Sat, 19 Jun 2010 15:24:27 +0000 Subject: smc91c92_cs: fix the problem that lan & modem does not work simultaneously smc91c92_cs: Fix the problem that lan & modem does not work simultaneously in the Megahertz multi-function card. We need to write MEGAHERTZ_ISR to retrigger interrupt. Signed-off-by: Ken Kawasaki Signed-off-by: David S. Miller --- drivers/net/pcmcia/smc91c92_cs.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c index 64e6a84bbbbe..307cd1721e91 100644 --- a/drivers/net/pcmcia/smc91c92_cs.c +++ b/drivers/net/pcmcia/smc91c92_cs.c @@ -1505,12 +1505,20 @@ irq_done: writeb(cor & ~COR_IREQ_ENA, smc->base + MOT_LAN + CISREG_COR); writeb(cor, smc->base + MOT_LAN + CISREG_COR); } -#ifdef DOES_NOT_WORK - if (smc->base != NULL) { /* Megahertz MFC's */ - readb(smc->base+MEGAHERTZ_ISR); - readb(smc->base+MEGAHERTZ_ISR); + + if ((smc->base != NULL) && /* Megahertz MFC's */ + (smc->manfid == MANFID_MEGAHERTZ) && + (smc->cardid == PRODID_MEGAHERTZ_EM3288)) { + + u_char tmp; + tmp = readb(smc->base+MEGAHERTZ_ISR); + tmp = readb(smc->base+MEGAHERTZ_ISR); + + /* Retrigger interrupt if needed */ + writeb(tmp, smc->base + MEGAHERTZ_ISR); + writeb(tmp, smc->base + MEGAHERTZ_ISR); } -#endif + spin_unlock(&smc->lock); return IRQ_RETVAL(handled); } -- cgit v1.2.2 From ed770f01360b392564650bf1553ce723fa46afec Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Sun, 20 Jun 2010 22:07:48 +0000 Subject: cpmac: do not leak struct net_device on phy_connect errors If the call to phy_connect fails, we will return directly instead of freeing the previously allocated struct net_device. Signed-off-by: Florian Fainelli CC: stable@kernel.org Signed-off-by: David S. Miller --- drivers/net/cpmac.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/cpmac.c b/drivers/net/cpmac.c index 3c58db595285..23786ee34bed 100644 --- a/drivers/net/cpmac.c +++ b/drivers/net/cpmac.c @@ -1181,7 +1181,8 @@ static int __devinit cpmac_probe(struct platform_device *pdev) if (netif_msg_drv(priv)) printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name); - return PTR_ERR(priv->phy); + rc = PTR_ERR(priv->phy); + goto fail; } if ((rc = register_netdev(dev))) { -- cgit v1.2.2 From cc413d9097dfc6237f37dcaf52346db1061a6119 Mon Sep 17 00:00:00 2001 From: Michal Schmidt Date: Thu, 24 Jun 2010 04:13:44 +0000 Subject: vxge: fix memory leak in vxge_alloc_msix() error path When pci_enable_msix() returned ret<0, entries and vxge_entries were leaked. While at it, use the centralized exit idiom in the function. Signed-off-by: Michal Schmidt Acked-by: Ram Vepa Signed-off-by: David S. Miller --- drivers/net/vxge/vxge-main.c | 29 ++++++++++++++++++++--------- 1 file changed, 20 insertions(+), 9 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/vxge/vxge-main.c b/drivers/net/vxge/vxge-main.c index b504bd561362..d14e207de1df 100644 --- a/drivers/net/vxge/vxge-main.c +++ b/drivers/net/vxge/vxge-main.c @@ -2262,7 +2262,8 @@ start: vxge_debug_init(VXGE_ERR, "%s: memory allocation failed", VXGE_DRIVER_NAME); - return -ENOMEM; + ret = -ENOMEM; + goto alloc_entries_failed; } vdev->vxge_entries = @@ -2271,8 +2272,8 @@ start: if (!vdev->vxge_entries) { vxge_debug_init(VXGE_ERR, "%s: memory allocation failed", VXGE_DRIVER_NAME); - kfree(vdev->entries); - return -ENOMEM; + ret = -ENOMEM; + goto alloc_vxge_entries_failed; } for (i = 0, j = 0; i < vdev->no_of_vpath; i++) { @@ -2303,22 +2304,32 @@ start: vxge_debug_init(VXGE_ERR, "%s: MSI-X enable failed for %d vectors, ret: %d", VXGE_DRIVER_NAME, vdev->intr_cnt, ret); + if ((max_config_vpath != VXGE_USE_DEFAULT) || (ret < 3)) { + ret = -ENODEV; + goto enable_msix_failed; + } + kfree(vdev->entries); kfree(vdev->vxge_entries); vdev->entries = NULL; vdev->vxge_entries = NULL; - - if ((max_config_vpath != VXGE_USE_DEFAULT) || (ret < 3)) - return -ENODEV; /* Try with less no of vector by reducing no of vpaths count */ temp = (ret - 1)/2; vxge_close_vpaths(vdev, temp); vdev->no_of_vpath = temp; goto start; - } else if (ret < 0) - return -ENODEV; - + } else if (ret < 0) { + ret = -ENODEV; + goto enable_msix_failed; + } return 0; + +enable_msix_failed: + kfree(vdev->vxge_entries); +alloc_vxge_entries_failed: + kfree(vdev->entries); +alloc_entries_failed: + return ret; } static int vxge_enable_msix(struct vxgedev *vdev) -- cgit v1.2.2 From e2f5b04563786d4b7d7648868de7e941a0649372 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Tue, 22 Jun 2010 02:38:13 +0000 Subject: phylib: Add autoload support for the LXT973 phy. Commit e13647c1 (phylib: Add support for the LXT973 phy.) added a new ID but neglected to also add it to the MODULE_DEVICE_TABLE. Signed-off-by: David Woodhouse Signed-off-by: David S. Miller --- drivers/net/phy/lxt.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/phy/lxt.c b/drivers/net/phy/lxt.c index dbd003453737..29c39ff85de5 100644 --- a/drivers/net/phy/lxt.c +++ b/drivers/net/phy/lxt.c @@ -226,6 +226,7 @@ module_exit(lxt_exit); static struct mdio_device_id lxt_tbl[] = { { 0x78100000, 0xfffffff0 }, { 0x001378e0, 0xfffffff0 }, + { 0x00137a10, 0xfffffff0 }, { } }; -- cgit v1.2.2 From c22d7ac844f1cb9c6a5fd20f89ebadc2feef891b Mon Sep 17 00:00:00 2001 From: Andy Gospodarek Date: Fri, 25 Jun 2010 09:50:44 +0000 Subject: bonding: prevent netpoll over bonded interfaces Support for netpoll over bonded interfaces was added here: commit f6dc31a85cd46a959bdd987adad14c3b645e03c1 Author: WANG Cong Date: Thu May 6 00:48:51 2010 -0700 bonding: make bonding support netpoll but it is bad enough that we should probably just disable netpoll over bonding until some of the locking logic in the bonding driver is changed or converted completely to RCU. Simple actions like changing the active slave in active-backup mode will hang the box if a high enough printk debugging level is enabled. Keeping the old code around will be good for anyone that wants to work on it (and for after the RCU conversion), so I propose this small patch rather than ripping it all out. Signed-off-by: Andy Gospodarek Signed-off-by: Jay Vosburgh Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 33 ++++++++++++++++++++++----------- 1 file changed, 22 insertions(+), 11 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 5e12462a9d5e..c3d98dde2f86 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -168,7 +168,7 @@ static int arp_ip_count; static int bond_mode = BOND_MODE_ROUNDROBIN; static int xmit_hashtype = BOND_XMIT_POLICY_LAYER2; static int lacp_fast; - +static int disable_netpoll = 1; const struct bond_parm_tbl bond_lacp_tbl[] = { { "slow", AD_LACP_SLOW}, @@ -1742,15 +1742,23 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev) bond_set_carrier(bond); #ifdef CONFIG_NET_POLL_CONTROLLER - if (slaves_support_netpoll(bond_dev)) { - bond_dev->priv_flags &= ~IFF_DISABLE_NETPOLL; - if (bond_dev->npinfo) - slave_dev->npinfo = bond_dev->npinfo; - } else if (!(bond_dev->priv_flags & IFF_DISABLE_NETPOLL)) { + /* + * Netpoll and bonding is broken, make sure it is not initialized + * until it is fixed. + */ + if (disable_netpoll) { bond_dev->priv_flags |= IFF_DISABLE_NETPOLL; - pr_info("New slave device %s does not support netpoll\n", - slave_dev->name); - pr_info("Disabling netpoll support for %s\n", bond_dev->name); + } else { + if (slaves_support_netpoll(bond_dev)) { + bond_dev->priv_flags &= ~IFF_DISABLE_NETPOLL; + if (bond_dev->npinfo) + slave_dev->npinfo = bond_dev->npinfo; + } else if (!(bond_dev->priv_flags & IFF_DISABLE_NETPOLL)) { + bond_dev->priv_flags |= IFF_DISABLE_NETPOLL; + pr_info("New slave device %s does not support netpoll\n", + slave_dev->name); + pr_info("Disabling netpoll support for %s\n", bond_dev->name); + } } #endif read_unlock(&bond->lock); @@ -1950,8 +1958,11 @@ int bond_release(struct net_device *bond_dev, struct net_device *slave_dev) #ifdef CONFIG_NET_POLL_CONTROLLER read_lock_bh(&bond->lock); - if (slaves_support_netpoll(bond_dev)) - bond_dev->priv_flags &= ~IFF_DISABLE_NETPOLL; + + /* Make sure netpoll over stays disabled until fixed. */ + if (!disable_netpoll) + if (slaves_support_netpoll(bond_dev)) + bond_dev->priv_flags &= ~IFF_DISABLE_NETPOLL; read_unlock_bh(&bond->lock); if (slave_dev->netdev_ops->ndo_netpoll_cleanup) slave_dev->netdev_ops->ndo_netpoll_cleanup(slave_dev); -- cgit v1.2.2 From fa37813401ff52d78591c262d6542e4d5d935584 Mon Sep 17 00:00:00 2001 From: Andy Gospodarek Date: Tue, 29 Jun 2010 18:28:12 +0000 Subject: ixgbe: fix panic when shutting down system with WoL enabled This patch added to 2.6.34: commit 5f6c01819979afbfec7e0b15fe52371b8eed87e8 Author: Jesse Brandeburg Date: Wed Apr 14 16:04:23 2010 -0700 ixgbe: fix bug with vlan strip in promsic mode among other things added a function called ixgbe_vlan_filter_enable. This new function wants to access and set some rx_ring parameters, but adapter->rx_ring has already been freed. This simply moves the free until after the access and makes __ixgbe_shutdown look more like ixgbe_remove. Signed-off-by: Andy Gospodarek Acked-by: Jesse Brandeburg Tested-by: Emil Tantilov Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index ce30c62a97f7..e237748995c1 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -5195,7 +5195,6 @@ static int __ixgbe_shutdown(struct pci_dev *pdev, bool *enable_wake) ixgbe_free_all_tx_resources(adapter); ixgbe_free_all_rx_resources(adapter); } - ixgbe_clear_interrupt_scheme(adapter); #ifdef CONFIG_PM retval = pci_save_state(pdev); @@ -5230,6 +5229,8 @@ static int __ixgbe_shutdown(struct pci_dev *pdev, bool *enable_wake) *enable_wake = !!wufc; + ixgbe_clear_interrupt_scheme(adapter); + ixgbe_release_hw_control(adapter); pci_disable_device(pdev); -- cgit v1.2.2 From 9f756f018a6d9f83556f972ce7fcd6870274efae Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Tue, 29 Jun 2010 18:28:36 +0000 Subject: ixgbe: disable tx engine before disabling tx laser Disabling the tx laser while receiving DMA requests can hang the device. After this occurs the device is in a bad state. The GPIO bit never clears when PCI master access is disabled and a reboot is required to get the device in a good state again. Signed-off-by: John Fastabend Acked-by: Peter P Waskiewicz Jr Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_main.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index e237748995c1..7ddd60e7d389 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -3684,10 +3684,6 @@ void ixgbe_down(struct ixgbe_adapter *adapter) /* signal that we are down to the interrupt handler */ set_bit(__IXGBE_DOWN, &adapter->state); - /* power down the optics */ - if (hw->phy.multispeed_fiber) - hw->mac.ops.disable_tx_laser(hw); - /* disable receive for all VFs and wait one second */ if (adapter->num_vfs) { /* ping all the active vfs to let them know we are going down */ @@ -3742,6 +3738,10 @@ void ixgbe_down(struct ixgbe_adapter *adapter) (IXGBE_READ_REG(hw, IXGBE_DMATXCTL) & ~IXGBE_DMATXCTL_TE)); + /* power down the optics */ + if (hw->phy.multispeed_fiber) + hw->mac.ops.disable_tx_laser(hw); + /* clear n-tuple filters that are cached */ ethtool_ntuple_flush(netdev); -- cgit v1.2.2 From d3ead2413cb99d3e6265577b12537434e229d8c2 Mon Sep 17 00:00:00 2001 From: Guillaume Gaudonville Date: Tue, 29 Jun 2010 18:29:00 +0000 Subject: ixgbe: skip non IPv4 packets in ATR filter In driver ixgbe, ixgbe_atr may cause crashes for non-ipv4 packets. Just add a test to check skb->protocol. It may crash on short packets due to ip_hdr() access. Signed-off-by: Guillaume Gaudonville Acked-by: Peter P Waskiewicz Jr Signed-off-by: Don Skidmore Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_main.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 7ddd60e7d389..a0b33165b989 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -6024,7 +6024,6 @@ static void ixgbe_tx_queue(struct ixgbe_adapter *adapter, static void ixgbe_atr(struct ixgbe_adapter *adapter, struct sk_buff *skb, int queue, u32 tx_flags) { - /* Right now, we support IPv4 only */ struct ixgbe_atr_input atr_input; struct tcphdr *th; struct iphdr *iph = ip_hdr(skb); @@ -6033,6 +6032,9 @@ static void ixgbe_atr(struct ixgbe_adapter *adapter, struct sk_buff *skb, u32 src_ipv4_addr, dst_ipv4_addr; u8 l4type = 0; + /* Right now, we support IPv4 only */ + if (skb->protocol != htons(ETH_P_IP)) + return; /* check if we're UDP or TCP */ if (iph->protocol == IPPROTO_TCP) { th = tcp_hdr(skb); -- cgit v1.2.2 From 9b2c2ff7a1c04e69842254dd4afe0f8ad4efa439 Mon Sep 17 00:00:00 2001 From: Saeed Bishara Date: Sun, 27 Jun 2010 00:26:43 +0000 Subject: mv643xx_eth: use sw csum for big packets Some controllers (KW, Dove) limits the TX IP/layer4 checksum offloading to a max size. Signed-off-by: Saeed Bishara Acked-by: Lennert Buytenhek Signed-off-by: David S. Miller --- drivers/net/mv643xx_eth.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index e345ec8cb473..73bb8ea6f54a 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -289,6 +289,7 @@ struct mv643xx_eth_shared_private { unsigned int t_clk; int extended_rx_coal_limit; int tx_bw_control; + int tx_csum_limit; }; #define TX_BW_CONTROL_ABSENT 0 @@ -776,13 +777,16 @@ static int txq_submit_skb(struct tx_queue *txq, struct sk_buff *skb) l4i_chk = 0; if (skb->ip_summed == CHECKSUM_PARTIAL) { + int hdr_len; int tag_bytes; BUG_ON(skb->protocol != htons(ETH_P_IP) && skb->protocol != htons(ETH_P_8021Q)); - tag_bytes = (void *)ip_hdr(skb) - (void *)skb->data - ETH_HLEN; - if (unlikely(tag_bytes & ~12)) { + hdr_len = (void *)ip_hdr(skb) - (void *)skb->data; + tag_bytes = hdr_len - ETH_HLEN; + if (skb->len - hdr_len > mp->shared->tx_csum_limit || + unlikely(tag_bytes & ~12)) { if (skb_checksum_help(skb) == 0) goto no_csum; kfree_skb(skb); @@ -2666,6 +2670,7 @@ static int mv643xx_eth_shared_probe(struct platform_device *pdev) * Detect hardware parameters. */ msp->t_clk = (pd != NULL && pd->t_clk != 0) ? pd->t_clk : 133000000; + msp->tx_csum_limit = pd->tx_csum_limit ? pd->tx_csum_limit : 9 * 1024; infer_hw_params(msp); platform_set_drvdata(pdev, msp); -- cgit v1.2.2 From 42d782ac1bef7cbcdf05b857731345c6e8149f90 Mon Sep 17 00:00:00 2001 From: Flavio Leitner Date: Tue, 29 Jun 2010 08:24:39 +0000 Subject: bonding: check if clients MAC addr has changed When two systems using bonding devices in adaptive load balancing (ALB) communicates with each other, an endless ping-pong of ARP replies starts between these two systems. What happens? In the ALB mode, bonding driver keeps track of each client connected in a hash table, so it can do the receive load balancing (RLB). This hash table is updated when an ARP reply is received, then it scans for the client entry, updates its MAC address and flag it to be announced later. Therefore, two seconds later, the alb monitor runs and send for each updated client entry two ARP replies updating this specific client. The same process happens on the receiving system, causing the endless ping-pong of arp replies. See more information including the relevant functions below: System 1 System 2 bond0 bond0 ping ARP request ---------> <--------- ARP reply +->rlb_arp_recv <---------------------+ <--- loop begins | rlb_update_entry_from_arp | | client_info->ntt = 1; | | bond_info->rx_ntt = 1; | | | | | | | | bond_alb_monitor | | rlb_update_rx_clients | | rlb_update_client | | arp_create(ARPOP_REPLY) | | send ARP reply --------------> V | send ARP reply --------------> | rlb_arp_recv | rlb_update_entry_from_arp | client_info->ntt = 1; | bond_info->rx_ntt = 1; | < snipped, same as in system 1> +------- <-------------- send ARP reply <-------------- send ARP reply Besides the unneeded networking traffic, this loop breaks a cluster because a backup system can't take over the IP address. There is always one system sending an ARP reply poisoning the network. This patch fixes the problem adding a check for the MAC address before updating it. Thus, if the MAC address didn't change, there is no need to update neither to announce it later. Signed-off-by: Flavio Leitner Signed-off-by: Jay Vosburgh Signed-off-by: David S. Miller --- drivers/net/bonding/bond_alb.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c index 40fdc41446cc..df483076eda6 100644 --- a/drivers/net/bonding/bond_alb.c +++ b/drivers/net/bonding/bond_alb.c @@ -340,7 +340,8 @@ static void rlb_update_entry_from_arp(struct bonding *bond, struct arp_pkt *arp) if ((client_info->assigned) && (client_info->ip_src == arp->ip_dst) && - (client_info->ip_dst == arp->ip_src)) { + (client_info->ip_dst == arp->ip_src) && + (compare_ether_addr_64bits(client_info->mac_dst, arp->mac_src))) { /* update the clients MAC address */ memcpy(client_info->mac_dst, arp->mac_src, ETH_ALEN); client_info->ntt = 1; -- cgit v1.2.2 From e4c064728ca358622918fa69ab2bb05f5a2090a8 Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Mon, 21 Jun 2010 14:23:47 -0700 Subject: iwlwifi: remove key information during device restart When there is a firmware error or the firmware is reloaded for some other reason we currently clear all station information, including keys associated with them. A problem is that we do not clear some other information regarding keys that are not stored in the station structs. The consequence of this is that when the device is reconfigured after the firmware reload we can, among other things, run out of key indices. This fixes: https://bugzilla.kernel.org/show_bug.cgi?id=16232 http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2221 Signed-off-by: Reinette Chatre Reviewed-by: Johannes Berg --- drivers/net/wireless/iwlwifi/iwl-sta.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.h b/drivers/net/wireless/iwlwifi/iwl-sta.h index c2a453a1a991..dc43ebd1f1fd 100644 --- a/drivers/net/wireless/iwlwifi/iwl-sta.h +++ b/drivers/net/wireless/iwlwifi/iwl-sta.h @@ -97,6 +97,17 @@ static inline void iwl_clear_driver_stations(struct iwl_priv *priv) spin_lock_irqsave(&priv->sta_lock, flags); memset(priv->stations, 0, sizeof(priv->stations)); priv->num_stations = 0; + + /* + * Remove all key information that is not stored as part of station + * information since mac80211 may not have had a + * chance to remove all the keys. When device is reconfigured by + * mac80211 after an error all keys will be reconfigured. + */ + priv->ucode_key_table = 0; + priv->key_mapping_key = 0; + memset(priv->wep_keys, 0, sizeof(priv->wep_keys)); + spin_unlock_irqrestore(&priv->sta_lock, flags); } -- cgit v1.2.2 From 7b00ac51ffcda994ef0839001257be894cc6e5a8 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Fri, 2 Jul 2010 21:47:54 -0700 Subject: net: Revert "rndis_host: Poll status channel before control channel" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit c17b274dc2aa538b68c1f02b01a3c4e124b435ba. That change was reported to break rndis_wlan support for the WUSB54GS. Reported-by: Luís Picciochi Oliveira Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/usb/rndis_host.c | 18 ++++++------------ 1 file changed, 6 insertions(+), 12 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c index 28d3ee175e7b..dd8a4adf48ca 100644 --- a/drivers/net/usb/rndis_host.c +++ b/drivers/net/usb/rndis_host.c @@ -104,10 +104,8 @@ static void rndis_msg_indicate(struct usbnet *dev, struct rndis_indicate *msg, int rndis_command(struct usbnet *dev, struct rndis_msg_hdr *buf, int buflen) { struct cdc_state *info = (void *) &dev->data; - struct usb_cdc_notification notification; int master_ifnum; int retval; - int partial; unsigned count; __le32 rsp; u32 xid = 0, msg_len, request_id; @@ -135,17 +133,13 @@ int rndis_command(struct usbnet *dev, struct rndis_msg_hdr *buf, int buflen) if (unlikely(retval < 0 || xid == 0)) return retval; - /* Some devices don't respond on the control channel until - * polled on the status channel, so do that first. */ - retval = usb_interrupt_msg( - dev->udev, - usb_rcvintpipe(dev->udev, dev->status->desc.bEndpointAddress), - ¬ification, sizeof(notification), &partial, - RNDIS_CONTROL_TIMEOUT_MS); - if (unlikely(retval < 0)) - return retval; + // FIXME Seems like some devices discard responses when + // we time out and cancel our "get response" requests... + // so, this is fragile. Probably need to poll for status. - /* Poll the control channel; the request probably completed immediately */ + /* ignore status endpoint, just poll the control channel; + * the request probably completed immediately + */ rsp = buf->msg_type | RNDIS_MSG_COMPLETION; for (count = 0; count < 10; count++) { memset(buf, 0, CONTROL_BUFFER_SIZE); -- cgit v1.2.2 From 0dacca73a3ddefa6cb8a7e0282f938e01faa1a64 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Fri, 2 Jul 2010 21:49:02 -0700 Subject: usbnet: Set parent device early for netdev_printk() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit netdev_printk() follows the net_device's parent device pointer, so we must set that earlier than we previously did. Reported-by: Luís Picciochi Oliveira Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/usb/usbnet.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index a95c73de5824..81c76ada8e56 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -1293,6 +1293,9 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod) goto out; } + /* netdev_printk() needs this so do it as early as possible */ + SET_NETDEV_DEV(net, &udev->dev); + dev = netdev_priv(net); dev->udev = xdev; dev->intf = udev; @@ -1377,8 +1380,6 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod) dev->rx_urb_size = dev->hard_mtu; dev->maxpacket = usb_maxpacket (dev->udev, dev->out, 1); - SET_NETDEV_DEV(net, &udev->dev); - if ((dev->driver_info->flags & FLAG_WLAN) != 0) SET_NETDEV_DEVTYPE(net, &wlan_type); if ((dev->driver_info->flags & FLAG_WWAN) != 0) -- cgit v1.2.2 From 72046d84f0d6e3047f4d5a5173260141983b2b61 Mon Sep 17 00:00:00 2001 From: Breno Leitao Date: Thu, 1 Jul 2010 03:00:17 +0000 Subject: qlge: Replacing add_timer() to mod_timer() Currently qlge driver calls add_timer() instead of mod_timer(). This patch changes add_timer() to mod_timer(), which seems a better solution. Signed-off-by: Breno Leitao Signed-off-by: Ron Mercer Signed-off-by: David S. Miller --- drivers/net/qlge/qlge_main.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c index fa4b24c49f42..509dadcd1c5a 100644 --- a/drivers/net/qlge/qlge_main.c +++ b/drivers/net/qlge/qlge_main.c @@ -4611,8 +4611,7 @@ static void ql_timer(unsigned long data) return; } - qdev->timer.expires = jiffies + (5*HZ); - add_timer(&qdev->timer); + mod_timer(&qdev->timer, jiffies + (5*HZ)); } static int __devinit qlge_probe(struct pci_dev *pdev, @@ -4808,8 +4807,7 @@ static void qlge_io_resume(struct pci_dev *pdev) netif_err(qdev, ifup, qdev->ndev, "Device was not running prior to EEH.\n"); } - qdev->timer.expires = jiffies + (5*HZ); - add_timer(&qdev->timer); + mod_timer(&qdev->timer, jiffies + (5*HZ)); netif_device_attach(ndev); } @@ -4871,8 +4869,7 @@ static int qlge_resume(struct pci_dev *pdev) return err; } - qdev->timer.expires = jiffies + (5*HZ); - add_timer(&qdev->timer); + mod_timer(&qdev->timer, jiffies + (5*HZ)); netif_device_attach(ndev); return 0; -- cgit v1.2.2 From 7ae80abdba0644e12ac17da567a2db1efc1bf8a8 Mon Sep 17 00:00:00 2001 From: Breno Leitao Date: Thu, 1 Jul 2010 03:00:18 +0000 Subject: qlge: fix a eeh handler to not add a pending timer On some ocasions the function qlge_io_resume() tries to add a pending timer, which causes the system to hit the BUG() on add_timer() function. This patch removes the timer during the EEH recovery. Signed-off-by: Breno Leitao Signed-off-by: Ron Mercer Signed-off-by: David S. Miller --- drivers/net/qlge/qlge_main.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c index 509dadcd1c5a..d10bcefc0e45 100644 --- a/drivers/net/qlge/qlge_main.c +++ b/drivers/net/qlge/qlge_main.c @@ -4712,6 +4712,8 @@ static void ql_eeh_close(struct net_device *ndev) netif_stop_queue(ndev); } + /* Disabling the timer */ + del_timer_sync(&qdev->timer); if (test_bit(QL_ADAPTER_UP, &qdev->flags)) cancel_delayed_work_sync(&qdev->asic_reset_work); cancel_delayed_work_sync(&qdev->mpi_reset_work); -- cgit v1.2.2 From f0796d5c73e59786d09a1e617689d1d415f2db44 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Thu, 1 Jul 2010 13:21:57 +0000 Subject: net: decreasing real_num_tx_queues needs to flush qdisc Reducing real_num_queues needs to flush the qdisc otherwise skbs with queue_mappings greater then real_num_tx_queues can be sent to the underlying driver. The flow for this is, dev_queue_xmit() dev_pick_tx() skb_tx_hash() => hash using real_num_tx_queues skb_set_queue_mapping() ... qdisc_enqueue_root() => enqueue skb on txq from hash ... dev->real_num_tx_queues -= n ... sch_direct_xmit() dev_hard_start_xmit() ndo_start_xmit(skb,dev) => skb queue set with old hash skbs are enqueued on the qdisc with skb->queue_mapping set 0 < queue_mappings < real_num_tx_queues. When the driver decreases real_num_tx_queues skb's may be dequeued from the qdisc with a queue_mapping greater then real_num_tx_queues. This fixes a case in ixgbe where this was occurring with DCB and FCoE. Because the driver is using queue_mapping to map skbs to tx descriptor rings we can potentially map skbs to rings that no longer exist. Signed-off-by: John Fastabend Tested-by: Ross Brattain Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index a0b33165b989..7b5d9764f317 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -4001,7 +4001,7 @@ static void ixgbe_set_num_queues(struct ixgbe_adapter *adapter) done: /* Notify the stack of the (possibly) reduced Tx Queue count. */ - adapter->netdev->real_num_tx_queues = adapter->num_tx_queues; + netif_set_real_num_tx_queues(adapter->netdev, adapter->num_tx_queues); } static void ixgbe_acquire_msix_vectors(struct ixgbe_adapter *adapter, -- cgit v1.2.2 From 4a49043223e5047c8f60a09f7b2927a2e6e8dfc7 Mon Sep 17 00:00:00 2001 From: Jon Mason Date: Fri, 2 Jul 2010 09:13:49 +0000 Subject: s2io: resolve statistics issues This patch resolves a number of issues in the statistics gathering of the s2io driver. On Xframe adapters, the received multicast statistics counter includes pause frames which are not indicated to the driver. This can cause issues where the multicast packet count is higher than what has actually been received, possibly higher than the number of packets received. The driver software counters are replaced with the adapter hardware statistics for rx_packets, rx_bytes, and tx_bytes. It also uses the overflow registers to determine if the statistics wrapped the 32bit register (removing the window of having a statistic value less than the previous call). rx_length_errors statistic now includes undersized packets in addition to oversized packets in its counting. Finally, rx_crc_errors are now being counted. Signed-off-by: Jon Mason Signed-off-by: David S. Miller --- drivers/net/s2io.c | 101 +++++++++++++++++++++++++++++++++-------------------- drivers/net/s2io.h | 4 --- 2 files changed, 64 insertions(+), 41 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 668327ccd8d0..1d37f0c310ca 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -3130,7 +3130,6 @@ static void tx_intr_handler(struct fifo_info *fifo_data) pkt_cnt++; /* Updating the statistics block */ - nic->dev->stats.tx_bytes += skb->len; swstats->mem_freed += skb->truesize; dev_kfree_skb_irq(skb); @@ -4901,48 +4900,81 @@ static void s2io_updt_stats(struct s2io_nic *sp) * Return value: * pointer to the updated net_device_stats structure. */ - static struct net_device_stats *s2io_get_stats(struct net_device *dev) { struct s2io_nic *sp = netdev_priv(dev); - struct config_param *config = &sp->config; struct mac_info *mac_control = &sp->mac_control; struct stat_block *stats = mac_control->stats_info; - int i; + u64 delta; /* Configure Stats for immediate updt */ s2io_updt_stats(sp); - /* Using sp->stats as a staging area, because reset (due to mtu - change, for example) will clear some hardware counters */ - dev->stats.tx_packets += le32_to_cpu(stats->tmac_frms) - - sp->stats.tx_packets; - sp->stats.tx_packets = le32_to_cpu(stats->tmac_frms); - - dev->stats.tx_errors += le32_to_cpu(stats->tmac_any_err_frms) - - sp->stats.tx_errors; - sp->stats.tx_errors = le32_to_cpu(stats->tmac_any_err_frms); - - dev->stats.rx_errors += le64_to_cpu(stats->rmac_drop_frms) - - sp->stats.rx_errors; - sp->stats.rx_errors = le64_to_cpu(stats->rmac_drop_frms); - - dev->stats.multicast = le32_to_cpu(stats->rmac_vld_mcst_frms) - - sp->stats.multicast; - sp->stats.multicast = le32_to_cpu(stats->rmac_vld_mcst_frms); - - dev->stats.rx_length_errors = le64_to_cpu(stats->rmac_long_frms) - - sp->stats.rx_length_errors; - sp->stats.rx_length_errors = le64_to_cpu(stats->rmac_long_frms); + /* A device reset will cause the on-adapter statistics to be zero'ed. + * This can be done while running by changing the MTU. To prevent the + * system from having the stats zero'ed, the driver keeps a copy of the + * last update to the system (which is also zero'ed on reset). This + * enables the driver to accurately know the delta between the last + * update and the current update. + */ + delta = ((u64) le32_to_cpu(stats->rmac_vld_frms_oflow) << 32 | + le32_to_cpu(stats->rmac_vld_frms)) - sp->stats.rx_packets; + sp->stats.rx_packets += delta; + dev->stats.rx_packets += delta; + + delta = ((u64) le32_to_cpu(stats->tmac_frms_oflow) << 32 | + le32_to_cpu(stats->tmac_frms)) - sp->stats.tx_packets; + sp->stats.tx_packets += delta; + dev->stats.tx_packets += delta; + + delta = ((u64) le32_to_cpu(stats->rmac_data_octets_oflow) << 32 | + le32_to_cpu(stats->rmac_data_octets)) - sp->stats.rx_bytes; + sp->stats.rx_bytes += delta; + dev->stats.rx_bytes += delta; + + delta = ((u64) le32_to_cpu(stats->tmac_data_octets_oflow) << 32 | + le32_to_cpu(stats->tmac_data_octets)) - sp->stats.tx_bytes; + sp->stats.tx_bytes += delta; + dev->stats.tx_bytes += delta; + + delta = le64_to_cpu(stats->rmac_drop_frms) - sp->stats.rx_errors; + sp->stats.rx_errors += delta; + dev->stats.rx_errors += delta; + + delta = ((u64) le32_to_cpu(stats->tmac_any_err_frms_oflow) << 32 | + le32_to_cpu(stats->tmac_any_err_frms)) - sp->stats.tx_errors; + sp->stats.tx_errors += delta; + dev->stats.tx_errors += delta; + + delta = le64_to_cpu(stats->rmac_drop_frms) - sp->stats.rx_dropped; + sp->stats.rx_dropped += delta; + dev->stats.rx_dropped += delta; + + delta = le64_to_cpu(stats->tmac_drop_frms) - sp->stats.tx_dropped; + sp->stats.tx_dropped += delta; + dev->stats.tx_dropped += delta; + + /* The adapter MAC interprets pause frames as multicast packets, but + * does not pass them up. This erroneously increases the multicast + * packet count and needs to be deducted when the multicast frame count + * is queried. + */ + delta = (u64) le32_to_cpu(stats->rmac_vld_mcst_frms_oflow) << 32 | + le32_to_cpu(stats->rmac_vld_mcst_frms); + delta -= le64_to_cpu(stats->rmac_pause_ctrl_frms); + delta -= sp->stats.multicast; + sp->stats.multicast += delta; + dev->stats.multicast += delta; - /* collect per-ring rx_packets and rx_bytes */ - dev->stats.rx_packets = dev->stats.rx_bytes = 0; - for (i = 0; i < config->rx_ring_num; i++) { - struct ring_info *ring = &mac_control->rings[i]; + delta = ((u64) le32_to_cpu(stats->rmac_usized_frms_oflow) << 32 | + le32_to_cpu(stats->rmac_usized_frms)) + + le64_to_cpu(stats->rmac_long_frms) - sp->stats.rx_length_errors; + sp->stats.rx_length_errors += delta; + dev->stats.rx_length_errors += delta; - dev->stats.rx_packets += ring->rx_packets; - dev->stats.rx_bytes += ring->rx_bytes; - } + delta = le64_to_cpu(stats->rmac_fcs_err_frms) - sp->stats.rx_crc_errors; + sp->stats.rx_crc_errors += delta; + dev->stats.rx_crc_errors += delta; return &dev->stats; } @@ -7455,15 +7487,11 @@ static int rx_osm_handler(struct ring_info *ring_data, struct RxD_t * rxdp) } } - /* Updating statistics */ - ring_data->rx_packets++; rxdp->Host_Control = 0; if (sp->rxd_mode == RXD_MODE_1) { int len = RXD_GET_BUFFER0_SIZE_1(rxdp->Control_2); - ring_data->rx_bytes += len; skb_put(skb, len); - } else if (sp->rxd_mode == RXD_MODE_3B) { int get_block = ring_data->rx_curr_get_info.block_index; int get_off = ring_data->rx_curr_get_info.offset; @@ -7472,7 +7500,6 @@ static int rx_osm_handler(struct ring_info *ring_data, struct RxD_t * rxdp) unsigned char *buff = skb_push(skb, buf0_len); struct buffAdd *ba = &ring_data->ba[get_block][get_off]; - ring_data->rx_bytes += buf0_len + buf2_len; memcpy(buff, ba->ba_0, buf0_len); skb_put(skb, buf2_len); } diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h index 47c36e0994f5..5e52c75892df 100644 --- a/drivers/net/s2io.h +++ b/drivers/net/s2io.h @@ -745,10 +745,6 @@ struct ring_info { /* Buffer Address store. */ struct buffAdd **ba; - - /* per-Ring statistics */ - unsigned long rx_packets; - unsigned long rx_bytes; } ____cacheline_aligned; /* Fifo specific structure */ -- cgit v1.2.2 From 1788f49548860fa1c861ee3454d47b466c877e43 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Fri, 2 Jul 2010 16:32:55 +0000 Subject: virtio_net: do not reschedule rx refill forever We currently fill all of RX ring, then add_buf returns ENOSPC, which gets mis-detected as an out of memory condition and causes us to reschedule the work, and so on forever. Fix this by oom = err == -ENOMEM; Signed-off-by: Michael S. Tsirkin Signed-off-by: Rusty Russell Cc: stable@kernel.org # .34.x Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 1edb7a61983c..ee7571195b10 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -415,7 +415,7 @@ static int add_recvbuf_mergeable(struct virtnet_info *vi, gfp_t gfp) static bool try_fill_recv(struct virtnet_info *vi, gfp_t gfp) { int err; - bool oom = false; + bool oom; do { if (vi->mergeable_rx_bufs) @@ -425,10 +425,9 @@ static bool try_fill_recv(struct virtnet_info *vi, gfp_t gfp) else err = add_recvbuf_small(vi, gfp); - if (err < 0) { - oom = true; + oom = err == -ENOMEM; + if (err < 0) break; - } ++vi->num; } while (err > 0); if (unlikely(vi->num > vi->max)) -- cgit v1.2.2 From 58eba97d0774c69b1cf3e5a8ac74419409d1abbf Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Fri, 2 Jul 2010 16:34:01 +0000 Subject: virtio_net: fix oom handling on tx virtio net will never try to overflow the TX ring, so the only reason add_buf may fail is out of memory. Thus, we can not stop the device until some request completes - there's no guarantee anything at all is outstanding. Make the error message clearer as well: error here does not indicate queue full. Signed-off-by: Michael S. Tsirkin Signed-off-by: Rusty Russell (...and avoid TX_BUSY) Cc: stable@kernel.org # .34.x (s/virtqueue_/vi->svq->vq_ops->/) Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 21 +++++++++++++-------- 1 file changed, 13 insertions(+), 8 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index ee7571195b10..bb6b67f6b0cc 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -562,7 +562,6 @@ static netdev_tx_t start_xmit(struct sk_buff *skb, struct net_device *dev) struct virtnet_info *vi = netdev_priv(dev); int capacity; -again: /* Free up any pending old buffers before queueing new ones. */ free_old_xmit_skbs(vi); @@ -571,14 +570,20 @@ again: /* This can happen with OOM and indirect buffers. */ if (unlikely(capacity < 0)) { - netif_stop_queue(dev); - dev_warn(&dev->dev, "Unexpected full queue\n"); - if (unlikely(!virtqueue_enable_cb(vi->svq))) { - virtqueue_disable_cb(vi->svq); - netif_start_queue(dev); - goto again; + if (net_ratelimit()) { + if (likely(capacity == -ENOMEM)) { + dev_warn(&dev->dev, + "TX queue failure: out of memory\n"); + } else { + dev->stats.tx_fifo_errors++; + dev_warn(&dev->dev, + "Unexpected TX queue failure: %d\n", + capacity); + } } - return NETDEV_TX_BUSY; + dev->stats.tx_dropped++; + kfree_skb(skb); + return NETDEV_TX_OK; } virtqueue_kick(vi->svq); -- cgit v1.2.2 From 3390712a474abdcd3de10024dd1062e5928d381c Mon Sep 17 00:00:00 2001 From: Kulikov Vasiliy Date: Sat, 3 Jul 2010 05:20:42 +0000 Subject: net/ne: fix memory leak in ne_drv_probe() net_device allocated with alloc_eip_netdev() must be freed. Signed-off-by: Kulikov Vasiliy Signed-off-by: David S. Miller --- drivers/net/ne.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ne.c b/drivers/net/ne.c index b8e2923a1d69..1063093b3afc 100644 --- a/drivers/net/ne.c +++ b/drivers/net/ne.c @@ -806,8 +806,10 @@ static int __init ne_drv_probe(struct platform_device *pdev) dev->base_addr = res->start; dev->irq = platform_get_irq(pdev, 0); } else { - if (this_dev < 0 || this_dev >= MAX_NE_CARDS) + if (this_dev < 0 || this_dev >= MAX_NE_CARDS) { + free_netdev(dev); return -EINVAL; + } dev->base_addr = io[this_dev]; dev->irq = irq[this_dev]; dev->mem_end = bad[this_dev]; -- cgit v1.2.2 From f8036965ccec4d786d8bf09bf57b793542cb3dce Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Wed, 7 Jul 2010 15:19:18 +0530 Subject: ath9k_htc: fix memory leak in ath9k_hif_usb_alloc_urbs Failure cases within ath9k_hif_usb_alloc_urbs are failed to release allocated memory. Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hif_usb.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c index 77b359162d6c..23c15aa9fbd5 100644 --- a/drivers/net/wireless/ath/ath9k/hif_usb.c +++ b/drivers/net/wireless/ath/ath9k/hif_usb.c @@ -730,13 +730,17 @@ static int ath9k_hif_usb_alloc_urbs(struct hif_device_usb *hif_dev) /* RX */ if (ath9k_hif_usb_alloc_rx_urbs(hif_dev) < 0) - goto err; + goto err_rx; /* Register Read */ if (ath9k_hif_usb_alloc_reg_in_urb(hif_dev) < 0) - goto err; + goto err_reg; return 0; +err_reg: + ath9k_hif_usb_dealloc_rx_urbs(hif_dev); +err_rx: + ath9k_hif_usb_dealloc_tx_urbs(hif_dev); err: return -ENOMEM; } -- cgit v1.2.2 From dfe1e8eddcd73fc58124933c14c2efe93fab0b8f Mon Sep 17 00:00:00 2001 From: Denis Kirjanov Date: Mon, 5 Jul 2010 21:44:20 +0000 Subject: ll_temac: Fix missing iounmaps Fix missing iounmaps. Signed-off-by: Denis Kirjanov Signed-off-by: David S. Miller --- drivers/net/ll_temac_main.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ll_temac_main.c b/drivers/net/ll_temac_main.c index 52dcc8495647..6474c4973d3a 100644 --- a/drivers/net/ll_temac_main.c +++ b/drivers/net/ll_temac_main.c @@ -964,7 +964,7 @@ temac_of_probe(struct of_device *op, const struct of_device_id *match) np = of_parse_phandle(op->dev.of_node, "llink-connected", 0); if (!np) { dev_err(&op->dev, "could not find DMA node\n"); - goto nodev; + goto err_iounmap; } /* Setup the DMA register accesses, could be DCR or memory mapped */ @@ -978,7 +978,7 @@ temac_of_probe(struct of_device *op, const struct of_device_id *match) dev_dbg(&op->dev, "MEM base: %p\n", lp->sdma_regs); } else { dev_err(&op->dev, "unable to map DMA registers\n"); - goto nodev; + goto err_iounmap; } } @@ -987,7 +987,7 @@ temac_of_probe(struct of_device *op, const struct of_device_id *match) if ((lp->rx_irq == NO_IRQ) || (lp->tx_irq == NO_IRQ)) { dev_err(&op->dev, "could not determine irqs\n"); rc = -ENOMEM; - goto nodev; + goto err_iounmap_2; } of_node_put(np); /* Finished with the DMA node; drop the reference */ @@ -997,7 +997,7 @@ temac_of_probe(struct of_device *op, const struct of_device_id *match) if ((!addr) || (size != 6)) { dev_err(&op->dev, "could not find MAC address\n"); rc = -ENODEV; - goto nodev; + goto err_iounmap_2; } temac_set_mac_address(ndev, (void *)addr); @@ -1013,7 +1013,7 @@ temac_of_probe(struct of_device *op, const struct of_device_id *match) rc = sysfs_create_group(&lp->dev->kobj, &temac_attr_group); if (rc) { dev_err(lp->dev, "Error creating sysfs files\n"); - goto nodev; + goto err_iounmap_2; } rc = register_netdev(lp->ndev); @@ -1026,6 +1026,11 @@ temac_of_probe(struct of_device *op, const struct of_device_id *match) err_register_ndev: sysfs_remove_group(&lp->dev->kobj, &temac_attr_group); + err_iounmap_2: + if (lp->sdma_regs) + iounmap(lp->sdma_regs); + err_iounmap: + iounmap(lp->regs); nodev: free_netdev(ndev); ndev = NULL; @@ -1044,6 +1049,9 @@ static int __devexit temac_of_remove(struct of_device *op) of_node_put(lp->phy_node); lp->phy_node = NULL; dev_set_drvdata(&op->dev, NULL); + iounmap(lp->regs); + if (lp->sdma_regs) + iounmap(lp->sdma_regs); free_netdev(ndev); return 0; } -- cgit v1.2.2 From 7074b16cc6bd27b1962e8f592b3733ebe92f4897 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Tue, 6 Jul 2010 03:02:03 +0000 Subject: vxge: show startup message with KERN_INFO The original KERN_CRIT will mess up terminals. CC: Sreenivasa Honnur Signed-off-by: Wu Fengguang Signed-off-by: David S. Miller --- drivers/net/vxge/vxge-main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/vxge/vxge-main.c b/drivers/net/vxge/vxge-main.c index d14e207de1df..fc8b2d7a0919 100644 --- a/drivers/net/vxge/vxge-main.c +++ b/drivers/net/vxge/vxge-main.c @@ -4517,9 +4517,9 @@ vxge_starter(void) char version[32]; snprintf(version, 32, "%s", DRV_VERSION); - printk(KERN_CRIT "%s: Copyright(c) 2002-2009 Neterion Inc\n", + printk(KERN_INFO "%s: Copyright(c) 2002-2009 Neterion Inc\n", VXGE_DRIVER_NAME); - printk(KERN_CRIT "%s: Driver version: %s\n", + printk(KERN_INFO "%s: Driver version: %s\n", VXGE_DRIVER_NAME, version); verify_bandwidth(); -- cgit v1.2.2 From 33b665eeeb85956ccbdf31c4c31a4e2a31133c44 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 6 Jul 2010 05:18:11 +0000 Subject: NET: SB1250: Initialize .owner Signed-off-by: Ralf Baechle drivers/net/sb1250-mac.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) Signed-off-by: David S. Miller --- drivers/net/sb1250-mac.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/sb1250-mac.c b/drivers/net/sb1250-mac.c index 1f3acc3a5dfd..79eee3062083 100644 --- a/drivers/net/sb1250-mac.c +++ b/drivers/net/sb1250-mac.c @@ -2671,6 +2671,7 @@ static struct platform_driver sbmac_driver = { .remove = __exit_p(sbmac_remove), .driver = { .name = sbmac_string, + .owner = THIS_MODULE, }, }; -- cgit v1.2.2 From 17c99297212a2d1b1779a08caf4b0d83a85545df Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Sun, 11 Jul 2010 17:10:09 -0700 Subject: r8169: incorrect identifier for a 8168dp Merge error. See CFG_METHOD_8 (0x3c800000 + 0x00300000) since version 8.002.00 of Realtek's driver. Signed-off-by: Francois Romieu Cc: Hayes Signed-off-by: David S. Miller --- drivers/net/r8169.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 96b6cfbf0a3a..cdc6a5c2e70d 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -1316,7 +1316,7 @@ static void rtl8169_get_mac_version(struct rtl8169_private *tp, { 0x7c800000, 0x28000000, RTL_GIGA_MAC_VER_26 }, /* 8168C family. */ - { 0x7cf00000, 0x3ca00000, RTL_GIGA_MAC_VER_24 }, + { 0x7cf00000, 0x3cb00000, RTL_GIGA_MAC_VER_24 }, { 0x7cf00000, 0x3c900000, RTL_GIGA_MAC_VER_23 }, { 0x7cf00000, 0x3c800000, RTL_GIGA_MAC_VER_18 }, { 0x7c800000, 0x3c800000, RTL_GIGA_MAC_VER_24 }, -- cgit v1.2.2 From ab83a38958ae7e419f18fabe9b2954a6087bfe0d Mon Sep 17 00:00:00 2001 From: Ken Kawasaki Date: Sat, 10 Jul 2010 01:18:13 +0000 Subject: axnet_cs: use spin_lock_irqsave in ax_interrupt Use spin_lock_irqsave instead of spin_lock in ax_interrupt because the interrupt handler can also be invoked from ei_watchdog. Signed-off-by: Ken Kawasaki Signed-off-by: David S. Miller --- drivers/net/pcmcia/axnet_cs.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c index 5b3dfb4ab279..33525bf2a3d3 100644 --- a/drivers/net/pcmcia/axnet_cs.c +++ b/drivers/net/pcmcia/axnet_cs.c @@ -1168,6 +1168,7 @@ static irqreturn_t ax_interrupt(int irq, void *dev_id) int interrupts, nr_serviced = 0, i; struct ei_device *ei_local; int handled = 0; + unsigned long flags; e8390_base = dev->base_addr; ei_local = netdev_priv(dev); @@ -1176,7 +1177,7 @@ static irqreturn_t ax_interrupt(int irq, void *dev_id) * Protect the irq test too. */ - spin_lock(&ei_local->page_lock); + spin_lock_irqsave(&ei_local->page_lock, flags); if (ei_local->irqlock) { @@ -1188,7 +1189,7 @@ static irqreturn_t ax_interrupt(int irq, void *dev_id) dev->name, inb_p(e8390_base + EN0_ISR), inb_p(e8390_base + EN0_IMR)); #endif - spin_unlock(&ei_local->page_lock); + spin_unlock_irqrestore(&ei_local->page_lock, flags); return IRQ_NONE; } @@ -1261,7 +1262,7 @@ static irqreturn_t ax_interrupt(int irq, void *dev_id) ei_local->irqlock = 0; outb_p(ENISR_ALL, e8390_base + EN0_IMR); - spin_unlock(&ei_local->page_lock); + spin_unlock_irqrestore(&ei_local->page_lock, flags); return IRQ_RETVAL(handled); } -- cgit v1.2.2 From 0f4da2d77e1bf424ac36424081afc22cbfc3ff2b Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Tue, 13 Jul 2010 14:06:32 -0400 Subject: hostap_pci: set dev->base_addr during probe "hostap: Protect against initialization interrupt" (which reinstated "wireless: hostap, fix oops due to early probing interrupt") reintroduced Bug 16111. This is because hostap_pci wasn't setting dev->base_addr, which is now checked in prism2_interrupt. As a result, initialization was failing for PCI-based hostap devices. This corrects that oversight. Signed-off-by: John W. Linville --- drivers/net/wireless/hostap/hostap_pci.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/hostap/hostap_pci.c b/drivers/net/wireless/hostap/hostap_pci.c index d24dc7dc0723..972a9c3af39e 100644 --- a/drivers/net/wireless/hostap/hostap_pci.c +++ b/drivers/net/wireless/hostap/hostap_pci.c @@ -330,6 +330,7 @@ static int prism2_pci_probe(struct pci_dev *pdev, dev->irq = pdev->irq; hw_priv->mem_start = mem; + dev->base_addr = (unsigned long) mem; prism2_pci_cor_sreset(local); -- cgit v1.2.2 From 9acd56d3f2a05191ee369cbdd8c37dd547aa19b8 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Fri, 16 Jul 2010 09:50:10 -0700 Subject: rt2x00: Fix lockdep warning in rt2x00lib_probe_dev() The rt2x00dev->intf_work workqueue is never initialized when a driver is probed for a non-existent device (in this case rt2500usb). On such a path we call rt2x00lib_remove_dev() to free any resources initialized during the probe before we use INIT_WORK to initialize the workqueue. This causes lockdep to get confused since the lock used in the workqueue hasn't been initialized yet but is now being acquired during cancel_work_sync() called by rt2x00lib_remove_dev(). Fix this by initializing the workqueue first before we attempt to probe the device. This should make lockdep happy and avoid breaking any assumptions about how the library cleans up after a probe fails. phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device. INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. Pid: 2027, comm: modprobe Not tainted 2.6.35-rc5+ #60 Call Trace: [] register_lock_class+0x152/0x31f [] ? usb_control_msg+0xd5/0x111 [] __lock_acquire+0xce/0xcf4 [] ? trace_hardirqs_off+0xd/0xf [] ? _raw_spin_unlock_irqrestore+0x33/0x41 [] lock_acquire+0xd1/0xf7 [] ? __cancel_work_timer+0x99/0x17e [] __cancel_work_timer+0xd0/0x17e [] ? __cancel_work_timer+0x99/0x17e [] cancel_work_sync+0xb/0xd [] rt2x00lib_remove_dev+0x25/0xb0 [rt2x00lib] [] rt2x00lib_probe_dev+0x380/0x3ed [rt2x00lib] [] ? __raw_spin_lock_init+0x31/0x52 [] ? T.676+0xe/0x10 [rt2x00usb] [] rt2x00usb_probe+0x121/0x15e [rt2x00usb] [] usb_probe_interface+0x151/0x19e [] driver_probe_device+0xa7/0x136 [] __driver_attach+0x4a/0x66 [] ? __driver_attach+0x0/0x66 [] bus_for_each_dev+0x54/0x89 [] driver_attach+0x19/0x1b [] bus_add_driver+0xb4/0x204 [] driver_register+0x98/0x109 [] usb_register_driver+0xb2/0x173 [] ? rt2500usb_init+0x0/0x20 [rt2500usb] [] rt2500usb_init+0x1e/0x20 [rt2500usb] [] do_one_initcall+0x6d/0x17a [] sys_init_module+0x9c/0x1e0 [] system_call_fastpath+0x16/0x1b Signed-off-by: Stephen Boyd Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00dev.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index 3ae468c4d760..f20d3eeeea7f 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -853,6 +853,11 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev) BIT(NL80211_IFTYPE_MESH_POINT) | BIT(NL80211_IFTYPE_WDS); + /* + * Initialize configuration work. + */ + INIT_WORK(&rt2x00dev->intf_work, rt2x00lib_intf_scheduled); + /* * Let the driver probe the device to detect the capabilities. */ @@ -862,11 +867,6 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev) goto exit; } - /* - * Initialize configuration work. - */ - INIT_WORK(&rt2x00dev->intf_work, rt2x00lib_intf_scheduled); - /* * Allocate queue array. */ -- cgit v1.2.2 From ee2e6114de3bdb1c34f3910b690f990483e981ab Mon Sep 17 00:00:00 2001 From: Robert Jennings Date: Fri, 16 Jul 2010 04:57:25 +0000 Subject: ibmveth: lost IRQ while closing/opening device leads to service loss The order of freeing the IRQ and freeing the device in firmware in ibmveth_close can cause the adapter to become unusable after a subsequent ibmveth_open. Only a reboot of the OS will make the network device usable again. This is seen when cycling the adapter up and down while there is network activity. There is a window where an IRQ will be left unserviced (H_EOI will not be called). The solution is to make a VIO_IRQ_DISABLE h_call, free the device with firmware, and then call free_irq. Signed-off-by: Robert Jennings Signed-off-by: David S. Miller --- drivers/net/ibmveth.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c index 7acb3edc47ef..2602852cc55a 100644 --- a/drivers/net/ibmveth.c +++ b/drivers/net/ibmveth.c @@ -677,7 +677,7 @@ static int ibmveth_close(struct net_device *netdev) if (!adapter->pool_config) netif_stop_queue(netdev); - free_irq(netdev->irq, netdev); + h_vio_signal(adapter->vdev->unit_address, VIO_IRQ_DISABLE); do { lpar_rc = h_free_logical_lan(adapter->vdev->unit_address); @@ -689,6 +689,8 @@ static int ibmveth_close(struct net_device *netdev) lpar_rc); } + free_irq(netdev->irq, netdev); + adapter->rx_no_buffer = *(u64*)(((char*)adapter->buffer_list_addr) + 4096 - 8); ibmveth_cleanup(adapter); -- cgit v1.2.2