From e13647c158307f0e7ff5fc5bec34731f28917595 Mon Sep 17 00:00:00 2001 From: Richard Cochran Date: Mon, 7 Jun 2010 05:39:32 +0000 Subject: phylib: Add support for the LXT973 phy. This patch implements a work around for Erratum 5, "3.3 V Fiber Speed Selection." If the hardware wiring does not respect this erratum, then fiber optic mode will not work properly. Signed-off-by: Richard Cochran Signed-off-by: David S. Miller --- drivers/net/phy/lxt.c | 51 ++++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 50 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/phy/lxt.c b/drivers/net/phy/lxt.c index 8ee929b796d8..dbd003453737 100644 --- a/drivers/net/phy/lxt.c +++ b/drivers/net/phy/lxt.c @@ -53,6 +53,9 @@ #define MII_LXT971_ISR 19 /* Interrupt Status Register */ +/* register definitions for the 973 */ +#define MII_LXT973_PCR 16 /* Port Configuration Register */ +#define PCR_FIBER_SELECT 1 MODULE_DESCRIPTION("Intel LXT PHY driver"); MODULE_AUTHOR("Andy Fleming"); @@ -119,6 +122,33 @@ static int lxt971_config_intr(struct phy_device *phydev) return err; } +static int lxt973_probe(struct phy_device *phydev) +{ + int val = phy_read(phydev, MII_LXT973_PCR); + + if (val & PCR_FIBER_SELECT) { + /* + * If fiber is selected, then the only correct setting + * is 100Mbps, full duplex, and auto negotiation off. + */ + val = phy_read(phydev, MII_BMCR); + val |= (BMCR_SPEED100 | BMCR_FULLDPLX); + val &= ~BMCR_ANENABLE; + phy_write(phydev, MII_BMCR, val); + /* Remember that the port is in fiber mode. */ + phydev->priv = lxt973_probe; + } else { + phydev->priv = NULL; + } + return 0; +} + +static int lxt973_config_aneg(struct phy_device *phydev) +{ + /* Do nothing if port is in fiber mode. */ + return phydev->priv ? 0 : genphy_config_aneg(phydev); +} + static struct phy_driver lxt970_driver = { .phy_id = 0x78100000, .name = "LXT970", @@ -146,6 +176,18 @@ static struct phy_driver lxt971_driver = { .driver = { .owner = THIS_MODULE,}, }; +static struct phy_driver lxt973_driver = { + .phy_id = 0x00137a10, + .name = "LXT973", + .phy_id_mask = 0xfffffff0, + .features = PHY_BASIC_FEATURES, + .flags = 0, + .probe = lxt973_probe, + .config_aneg = lxt973_config_aneg, + .read_status = genphy_read_status, + .driver = { .owner = THIS_MODULE,}, +}; + static int __init lxt_init(void) { int ret; @@ -157,9 +199,15 @@ static int __init lxt_init(void) ret = phy_driver_register(&lxt971_driver); if (ret) goto err2; + + ret = phy_driver_register(&lxt973_driver); + if (ret) + goto err3; return 0; - err2: + err3: + phy_driver_unregister(&lxt971_driver); + err2: phy_driver_unregister(&lxt970_driver); err1: return ret; @@ -169,6 +217,7 @@ static void __exit lxt_exit(void) { phy_driver_unregister(&lxt970_driver); phy_driver_unregister(&lxt971_driver); + phy_driver_unregister(&lxt973_driver); } module_init(lxt_init); -- cgit v1.2.2 From 619baba195d92ec39379e24c151f4a640898d140 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Wed, 9 Jun 2010 16:27:08 -0700 Subject: gianfar: Revive the driver for eTSEC devices (disable timestamping) Since commit cc772ab7cdcaa24d1fae332d92a1602788644f7a ("gianfar: Add hardware RX timestamping support"), the driver no longer works on at least MPC8313ERDB and MPC8568EMDS boards (and possibly much more boards as well). That's how MPC8313 Reference Manual describes RCTRL_TS_ENABLE bit: Timestamp incoming packets as padding bytes. PAL field is set to 8 if the PAL field is programmed to less than 8. Must be set to zero if TMR_CTRL[TE]=0. I see that the commit above sets this bit, but it doesn't handle TMR_CTRL. Manfred probably had this bit set by the firmware for his boards. But obviously this isn't true for all boards in the wild. Also, I recall that Freescale BSPs were explicitly disabling the timestamping because of a performance drop. For now, the best way to deal with this is just disable the timestamping, and later we can discuss proper device tree bindings and implement enabling this feature via some property. Signed-off-by: Anton Vorontsov Signed-off-by: David S. Miller --- drivers/net/gianfar.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 1830f3199cb5..46c69cd06553 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -747,8 +747,7 @@ static int gfar_of_init(struct of_device *ofdev, struct net_device **pdev) FSL_GIANFAR_DEV_HAS_CSUM | FSL_GIANFAR_DEV_HAS_VLAN | FSL_GIANFAR_DEV_HAS_MAGIC_PACKET | - FSL_GIANFAR_DEV_HAS_EXTENDED_HASH | - FSL_GIANFAR_DEV_HAS_TIMER; + FSL_GIANFAR_DEV_HAS_EXTENDED_HASH; ctype = of_get_property(np, "phy-connection-type", NULL); -- cgit v1.2.2 From 81a95f049962ec20a9aed888e676208b206f0f2e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Timo=20Ter=C3=A4s?= Date: Wed, 9 Jun 2010 17:31:48 -0700 Subject: r8169: fix mdio_read and update mdio_write according to hw specs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Realtek confirmed that a 20us delay is needed after mdio_read and mdio_write operations. Reduce the delay in mdio_write, and add it to mdio_read too. Also add a comment that the 20us is from hw specs. Signed-off-by: Timo Teräs Acked-by: Francois Romieu Signed-off-by: David S. Miller --- drivers/net/r8169.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 03a8318d90a2..96b6cfbf0a3a 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -560,10 +560,10 @@ static void mdio_write(void __iomem *ioaddr, int reg_addr, int value) udelay(25); } /* - * Some configurations require a small delay even after the write - * completed indication or the next write might fail. + * According to hardware specs a 20us delay is required after write + * complete indication, but before sending next command. */ - udelay(25); + udelay(20); } static int mdio_read(void __iomem *ioaddr, int reg_addr) @@ -583,6 +583,12 @@ static int mdio_read(void __iomem *ioaddr, int reg_addr) } udelay(25); } + /* + * According to hardware specs a 20us delay is required after read + * complete indication, but before sending next command. + */ + udelay(20); + return value; } -- cgit v1.2.2 From 349124a00754129a5f1e43efa84733e364bf3749 Mon Sep 17 00:00:00 2001 From: "Figo.zhang" Date: Mon, 7 Jun 2010 21:13:22 +0000 Subject: net8139: fix a race at the end of NAPI fix a race at the end of NAPI complete processing, it had better do __napi_complete() first before re-enable interrupt. Signed-off-by:Figo.zhang Signed-off-by: David S. Miller --- drivers/net/8139cp.c | 2 +- drivers/net/8139too.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c index 9c149750e2bf..284a5f4a63ac 100644 --- a/drivers/net/8139cp.c +++ b/drivers/net/8139cp.c @@ -598,8 +598,8 @@ rx_next: goto rx_status_loop; spin_lock_irqsave(&cp->lock, flags); - cpw16_f(IntrMask, cp_intr_mask); __napi_complete(napi); + cpw16_f(IntrMask, cp_intr_mask); spin_unlock_irqrestore(&cp->lock, flags); } diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c index 80cd074d3817..97d8068b372b 100644 --- a/drivers/net/8139too.c +++ b/drivers/net/8139too.c @@ -2089,8 +2089,8 @@ static int rtl8139_poll(struct napi_struct *napi, int budget) * again when we think we are done. */ spin_lock_irqsave(&tp->lock, flags); - RTL_W16_F(IntrMask, rtl8139_intr_mask); __napi_complete(napi); + RTL_W16_F(IntrMask, rtl8139_intr_mask); spin_unlock_irqrestore(&tp->lock, flags); } spin_unlock(&tp->rx_lock); -- cgit v1.2.2 From a385a53e659b35ebee604889e21c40e5c336941f Mon Sep 17 00:00:00 2001 From: Inaky Perez-Gonzalez Date: Fri, 11 Jun 2010 11:51:20 -0700 Subject: wimax/i2400m: fix missing endian correction read in fw loader MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit i2400m_fw_hdr_check() was accessing hardware field bcf_hdr->module_type (little endian 32) without converting to host byte sex. Reported-by: Данилин Михаил Signed-off-by: Inaky Perez-Gonzalez --- drivers/net/wimax/i2400m/fw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wimax/i2400m/fw.c b/drivers/net/wimax/i2400m/fw.c index 3f283bff0ff7..11491354e5b5 100644 --- a/drivers/net/wimax/i2400m/fw.c +++ b/drivers/net/wimax/i2400m/fw.c @@ -1192,7 +1192,7 @@ int i2400m_fw_hdr_check(struct i2400m *i2400m, unsigned module_type, header_len, major_version, minor_version, module_id, module_vendor, date, size; - module_type = bcf_hdr->module_type; + module_type = le32_to_cpu(bcf_hdr->module_type); header_len = sizeof(u32) * le32_to_cpu(bcf_hdr->header_len); major_version = (le32_to_cpu(bcf_hdr->header_version) & 0xffff0000) >> 16; -- cgit v1.2.2