From 0d176af5b7e658490b75427ccd23ff6a158c472b Mon Sep 17 00:00:00 2001 From: Sebastian Siewior Date: Mon, 28 Apr 2008 11:43:20 +0200 Subject: m68knommu: fec: remove FADS I found config FADS only in ppc/Kconfig. Bye bye relic. Signed-off-by: Sebastian Siewior Signed-off-by: Greg Ungerer --- drivers/net/fec.c | 10 ---------- 1 file changed, 10 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/fec.c b/drivers/net/fec.c index 32a4f17d35fc..6abbcd5f7c3a 100644 --- a/drivers/net/fec.c +++ b/drivers/net/fec.c @@ -2,12 +2,6 @@ * Fast Ethernet Controller (FEC) driver for Motorola MPC8xx. * Copyright (c) 1997 Dan Malek (dmalek@jlc.net) * - * This version of the driver is specific to the FADS implementation, - * since the board contains control registers external to the processor - * for the control of the LevelOne LXT970 transceiver. The MPC860T manual - * describes connections using the internal parallel port I/O, which - * is basically all of Port D. - * * Right now, I am very wasteful with the buffers. I allocate memory * pages and then divide them into 2K frame buffers. This way I know I * have buffers large enough to hold one frame within one buffer descriptor. @@ -1809,10 +1803,6 @@ static void __inline__ fec_request_intrs(struct net_device *dev) */ *((uint *) RPX_CSR_ADDR) &= ~BCSR2_FETHLEDMODE; #endif -#ifdef CONFIG_FADS - if (request_8xxirq(SIU_IRQ2, mii_link_interrupt, 0, "mii", dev) != 0) - panic("Could not allocate MII IRQ!"); -#endif } static void __inline__ fec_get_mac(struct net_device *dev) -- cgit v1.2.2