From 0ce34bc8f7d906d66ce6803f63399ef9bbe54012 Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Tue, 12 Dec 2006 01:26:11 +0000 Subject: [PATCH] zd1211rw: Remove addressing abstraction Instead of passing our own custom 32-bit addresses around and translating them, this patch makes all our register address constants absolute and removes the translation. There are two ugly parts: - fw_reg_addr() is needed to compute addresses of firmware registers, as this is dynamic based upon firmware - inc_addr() needs a small hack to handle byte vs word addressing However, both of those are only small, and we don't use fw_regs a whole lot anyway. The bonuses here include simplicity and improved driver readability. Also, the fact that registers are now referenced by 16-bit absolute addresses (as opposed to 32-bit pseudo addresses) means that over 2kb compiled code size has been shaved off. Includes some touchups and sparse fixes from Ulrich Kunitz. Signed-off-by: Daniel Drake Signed-off-by: John W. Linville --- drivers/net/wireless/zd1211rw/zd_chip.c | 59 +++++++++++--- drivers/net/wireless/zd1211rw/zd_chip.h | 89 +++++++++++---------- drivers/net/wireless/zd1211rw/zd_def.h | 2 + drivers/net/wireless/zd1211rw/zd_ieee80211.h | 1 - drivers/net/wireless/zd1211rw/zd_rf.h | 2 - drivers/net/wireless/zd1211rw/zd_types.h | 71 ----------------- drivers/net/wireless/zd1211rw/zd_usb.c | 112 +-------------------------- drivers/net/wireless/zd1211rw/zd_usb.h | 6 +- 8 files changed, 104 insertions(+), 238 deletions(-) delete mode 100644 drivers/net/wireless/zd1211rw/zd_types.h (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/zd1211rw/zd_chip.c b/drivers/net/wireless/zd1211rw/zd_chip.c index cc5151683fa1..12dfc0b6efe6 100644 --- a/drivers/net/wireless/zd1211rw/zd_chip.c +++ b/drivers/net/wireless/zd1211rw/zd_chip.c @@ -84,6 +84,18 @@ static void print_id(struct zd_chip *chip) dev_info(zd_chip_dev(chip), "%s\n", buffer); } +static zd_addr_t inc_addr(zd_addr_t addr) +{ + u16 a = (u16)addr; + /* Control registers use byte addressing, but everything else uses word + * addressing. */ + if ((a & 0xf000) == CR_START) + a += 2; + else + a += 1; + return (zd_addr_t)a; +} + /* Read a variable number of 32-bit values. Parameter count is not allowed to * exceed USB_MAX_IOREAD32_COUNT. */ @@ -114,7 +126,7 @@ int zd_ioread32v_locked(struct zd_chip *chip, u32 *values, const zd_addr_t *addr for (i = 0; i < count; i++) { int j = 2*i; /* We read the high word always first. */ - a16[j] = zd_inc_word(addr[i]); + a16[j] = inc_addr(addr[i]); a16[j+1] = addr[i]; } @@ -163,7 +175,7 @@ int _zd_iowrite32v_locked(struct zd_chip *chip, const struct zd_ioreq32 *ioreqs, j = 2*i; /* We write the high word always first. */ ioreqs16[j].value = ioreqs[i].value >> 16; - ioreqs16[j].addr = zd_inc_word(ioreqs[i].addr); + ioreqs16[j].addr = inc_addr(ioreqs[i].addr); ioreqs16[j+1].value = ioreqs[i].value; ioreqs16[j+1].addr = ioreqs[i].addr; } @@ -466,7 +478,8 @@ static int read_values(struct zd_chip *chip, u8 *values, size_t count, ZD_ASSERT(mutex_is_locked(&chip->mutex)); for (i = 0;;) { - r = zd_ioread32_locked(chip, &v, e2p_addr+i/2); + r = zd_ioread32_locked(chip, &v, + (zd_addr_t)((u16)e2p_addr+i/2)); if (r) return r; v -= guard; @@ -953,6 +966,11 @@ static int hw_init(struct zd_chip *chip) return set_beacon_interval(chip, 100); } +static zd_addr_t fw_reg_addr(struct zd_chip *chip, u16 offset) +{ + return (zd_addr_t)((u16)chip->fw_regs_base + offset); +} + #ifdef DEBUG static int dump_cr(struct zd_chip *chip, const zd_addr_t addr, const char *addr_string) @@ -987,9 +1005,11 @@ static int test_init(struct zd_chip *chip) static void dump_fw_registers(struct zd_chip *chip) { - static const zd_addr_t addr[4] = { - FW_FIRMWARE_VER, FW_USB_SPEED, FW_FIX_TX_RATE, - FW_LINK_STATUS + const zd_addr_t addr[4] = { + fw_reg_addr(chip, FW_REG_FIRMWARE_VER), + fw_reg_addr(chip, FW_REG_USB_SPEED), + fw_reg_addr(chip, FW_REG_FIX_TX_RATE), + fw_reg_addr(chip, FW_REG_LED_LINK_STATUS), }; int r; @@ -1015,7 +1035,8 @@ static int print_fw_version(struct zd_chip *chip) int r; u16 version; - r = zd_ioread16_locked(chip, &version, FW_FIRMWARE_VER); + r = zd_ioread16_locked(chip, &version, + fw_reg_addr(chip, FW_REG_FIRMWARE_VER)); if (r) return r; @@ -1095,6 +1116,22 @@ int zd_chip_disable_hwint(struct zd_chip *chip) return r; } +static int read_fw_regs_offset(struct zd_chip *chip) +{ + int r; + + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + r = zd_ioread16_locked(chip, (u16*)&chip->fw_regs_base, + FWRAW_REGS_ADDR); + if (r) + return r; + dev_dbg_f(zd_chip_dev(chip), "fw_regs_base: %#06hx\n", + (u16)chip->fw_regs_base); + + return 0; +} + + int zd_chip_init_hw(struct zd_chip *chip, u8 device_type) { int r; @@ -1114,7 +1151,7 @@ int zd_chip_init_hw(struct zd_chip *chip, u8 device_type) if (r) goto out; - r = zd_usb_init_hw(&chip->usb); + r = read_fw_regs_offset(chip); if (r) goto out; @@ -1294,15 +1331,15 @@ u8 zd_chip_get_channel(struct zd_chip *chip) int zd_chip_control_leds(struct zd_chip *chip, enum led_status status) { - static const zd_addr_t a[] = { - FW_LINK_STATUS, + const zd_addr_t a[] = { + fw_reg_addr(chip, FW_REG_LED_LINK_STATUS), CR_LED, }; int r; u16 v[ARRAY_SIZE(a)]; struct zd_ioreq16 ioreqs[ARRAY_SIZE(a)] = { - [0] = { FW_LINK_STATUS }, + [0] = { fw_reg_addr(chip, FW_REG_LED_LINK_STATUS) }, [1] = { CR_LED }, }; u16 other_led; diff --git a/drivers/net/wireless/zd1211rw/zd_chip.h b/drivers/net/wireless/zd1211rw/zd_chip.h index fa3437d6d742..b07569e391ee 100644 --- a/drivers/net/wireless/zd1211rw/zd_chip.h +++ b/drivers/net/wireless/zd1211rw/zd_chip.h @@ -18,7 +18,6 @@ #ifndef _ZD_CHIP_H #define _ZD_CHIP_H -#include "zd_types.h" #include "zd_rf.h" #include "zd_usb.h" @@ -27,6 +26,37 @@ * adds a processor for handling the USB protocol. */ +/* Address space */ +enum { + /* CONTROL REGISTERS */ + CR_START = 0x9000, + + + /* FIRMWARE */ + FW_START = 0xee00, + + + /* EEPROM */ + E2P_START = 0xf800, + E2P_LEN = 0x800, + + /* EEPROM layout */ + E2P_LOAD_CODE_LEN = 0xe, /* base 0xf800 */ + E2P_LOAD_VECT_LEN = 0x9, /* base 0xf80e */ + /* E2P_DATA indexes into this */ + E2P_DATA_LEN = 0x7e, /* base 0xf817 */ + E2P_BOOT_CODE_LEN = 0x760, /* base 0xf895 */ + E2P_INTR_VECT_LEN = 0xb, /* base 0xfff5 */ + + /* Some precomputed offsets into the EEPROM */ + E2P_DATA_OFFSET = E2P_LOAD_CODE_LEN + E2P_LOAD_VECT_LEN, + E2P_BOOT_CODE_OFFSET = E2P_DATA_OFFSET + E2P_DATA_LEN, +}; + +#define CTL_REG(offset) ((zd_addr_t)(CR_START + (offset))) +#define E2P_DATA(offset) ((zd_addr_t)(E2P_START + E2P_DATA_OFFSET + (offset))) +#define FWRAW_DATA(offset) ((zd_addr_t)(FW_START + (offset))) + /* 8-bit hardware registers */ #define CR0 CTL_REG(0x0000) #define CR1 CTL_REG(0x0004) @@ -302,7 +332,7 @@ #define CR_MAX_PHY_REG 255 -/* Taken from the ZYDAS driver, not all of them are relevant for the ZSD1211 +/* Taken from the ZYDAS driver, not all of them are relevant for the ZD1211 * driver. */ @@ -638,49 +668,26 @@ #define E2P_54M_INT_VALUE3 E2P_DATA(0x54) #define E2P_54M_INT_VALUE4 E2P_DATA(0x56) -/* All 16 bit values */ -#define FW_FIRMWARE_VER FW_REG(0) -/* non-zero if USB high speed connection */ -#define FW_USB_SPEED FW_REG(1) -#define FW_FIX_TX_RATE FW_REG(2) -/* Seems to be able to control LEDs over the firmware */ -#define FW_LINK_STATUS FW_REG(3) -#define FW_SOFT_RESET FW_REG(4) -#define FW_FLASH_CHK FW_REG(5) +/* This word contains the base address of the FW_REG_ registers below */ +#define FWRAW_REGS_ADDR FWRAW_DATA(0x1d) + +/* All 16 bit values, offset from the address in FWRAW_REGS_ADDR */ +enum { + FW_REG_FIRMWARE_VER = 0, + /* non-zero if USB high speed connection */ + FW_REG_USB_SPEED = 1, + FW_REG_FIX_TX_RATE = 2, + /* Seems to be able to control LEDs over the firmware */ + FW_REG_LED_LINK_STATUS = 3, + FW_REG_SOFT_RESET = 4, + FW_REG_FLASH_CHK = 5, +}; +/* Values for FW_LINK_STATUS */ #define FW_LINK_OFF 0x0 #define FW_LINK_TX 0x1 /* 0x2 - link led on? */ -enum { - /* CONTROL REGISTERS */ - CR_START = 0x9000, - - /* FIRMWARE */ - FW_START = 0xee00, - - /* The word at this offset contains the base address of the FW_REG - * registers */ - FW_REGS_ADDR_OFFSET = 0x1d, - - - /* EEPROM */ - E2P_START = 0xf800, - E2P_LEN = 0x800, - - /* EEPROM layout */ - E2P_LOAD_CODE_LEN = 0xe, /* base 0xf800 */ - E2P_LOAD_VECT_LEN = 0x9, /* base 0xf80e */ - /* E2P_DATA indexes into this */ - E2P_DATA_LEN = 0x7e, /* base 0xf817 */ - E2P_BOOT_CODE_LEN = 0x760, /* base 0xf895 */ - E2P_INTR_VECT_LEN = 0xb, /* base 0xfff5 */ - - /* Some precomputed offsets into the EEPROM */ - E2P_DATA_OFFSET = E2P_LOAD_CODE_LEN + E2P_LOAD_VECT_LEN, - E2P_BOOT_CODE_OFFSET = E2P_DATA_OFFSET + E2P_DATA_LEN, -}; - enum { /* indices for ofdm_cal_values */ OFDM_36M_INDEX = 0, @@ -692,6 +699,8 @@ struct zd_chip { struct zd_usb usb; struct zd_rf rf; struct mutex mutex; + /* Base address of FW_REG_ registers */ + zd_addr_t fw_regs_base; u8 e2p_mac[ETH_ALEN]; /* EepSetPoint in the vendor driver */ u8 pwr_cal_values[E2P_CHANNEL_COUNT]; diff --git a/drivers/net/wireless/zd1211rw/zd_def.h b/drivers/net/wireless/zd1211rw/zd_def.h index fb22f62cf1f3..deb99d1eaa77 100644 --- a/drivers/net/wireless/zd1211rw/zd_def.h +++ b/drivers/net/wireless/zd1211rw/zd_def.h @@ -23,6 +23,8 @@ #include #include +typedef u16 __nocast zd_addr_t; + #define dev_printk_f(level, dev, fmt, args...) \ dev_printk(level, dev, "%s() " fmt, __func__, ##args) diff --git a/drivers/net/wireless/zd1211rw/zd_ieee80211.h b/drivers/net/wireless/zd1211rw/zd_ieee80211.h index 26b8298dff8c..c4f36d39642b 100644 --- a/drivers/net/wireless/zd1211rw/zd_ieee80211.h +++ b/drivers/net/wireless/zd1211rw/zd_ieee80211.h @@ -2,7 +2,6 @@ #define _ZD_IEEE80211_H #include -#include "zd_types.h" /* Additional definitions from the standards. */ diff --git a/drivers/net/wireless/zd1211rw/zd_rf.h b/drivers/net/wireless/zd1211rw/zd_rf.h index 676b3734f1ed..a57732eb69e1 100644 --- a/drivers/net/wireless/zd1211rw/zd_rf.h +++ b/drivers/net/wireless/zd1211rw/zd_rf.h @@ -18,8 +18,6 @@ #ifndef _ZD_RF_H #define _ZD_RF_H -#include "zd_types.h" - #define UW2451_RF 0x2 #define UCHIP_RF 0x3 #define AL2230_RF 0x4 diff --git a/drivers/net/wireless/zd1211rw/zd_types.h b/drivers/net/wireless/zd1211rw/zd_types.h deleted file mode 100644 index b3d642833e2c..000000000000 --- a/drivers/net/wireless/zd1211rw/zd_types.h +++ /dev/null @@ -1,71 +0,0 @@ -/* zd_types.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef _ZD_TYPES_H -#define _ZD_TYPES_H - -#include - -/* We have three register spaces mapped into the overall USB address space of - * 64K words (16-bit values). There is the control register space of - * double-word registers, the eeprom register space and the firmware register - * space. The control register space is byte mapped, the others are word - * mapped. - * - * For that reason, we are using byte offsets for control registers and word - * offsets for everything else. - */ - -typedef u32 __nocast zd_addr_t; - -enum { - ADDR_BASE_MASK = 0xff000000, - ADDR_OFFSET_MASK = 0x0000ffff, - ADDR_ZERO_MASK = 0x00ff0000, - NULL_BASE = 0x00000000, - USB_BASE = 0x01000000, - CR_BASE = 0x02000000, - CR_MAX_OFFSET = 0x0b30, - E2P_BASE = 0x03000000, - E2P_MAX_OFFSET = 0x007e, - FW_BASE = 0x04000000, - FW_MAX_OFFSET = 0x0005, -}; - -#define ZD_ADDR_BASE(addr) ((u32)(addr) & ADDR_BASE_MASK) -#define ZD_OFFSET(addr) ((u32)(addr) & ADDR_OFFSET_MASK) - -#define ZD_ADDR(base, offset) \ - ((zd_addr_t)(((base) & ADDR_BASE_MASK) | ((offset) & ADDR_OFFSET_MASK))) - -#define ZD_NULL_ADDR ((zd_addr_t)0) -#define USB_REG(offset) ZD_ADDR(USB_BASE, offset) /* word addressing */ -#define CTL_REG(offset) ZD_ADDR(CR_BASE, offset) /* byte addressing */ -#define E2P_DATA(offset) ZD_ADDR(E2P_BASE, offset) /* word addressing */ -#define FW_REG(offset) ZD_ADDR(FW_BASE, offset) /* word addressing */ - -static inline zd_addr_t zd_inc_word(zd_addr_t addr) -{ - u32 base = ZD_ADDR_BASE(addr); - u32 offset = ZD_OFFSET(addr); - - offset += base == CR_BASE ? 2 : 1; - - return base | offset; -} - -#endif /* _ZD_TYPES_H */ diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c index 6a524409aeac..9025ad9e9d34 100644 --- a/drivers/net/wireless/zd1211rw/zd_usb.c +++ b/drivers/net/wireless/zd1211rw/zd_usb.c @@ -75,96 +75,6 @@ MODULE_DEVICE_TABLE(usb, usb_ids); #define FW_ZD1211_PREFIX "zd1211/zd1211_" #define FW_ZD1211B_PREFIX "zd1211/zd1211b_" -/* register address handling */ - -#ifdef DEBUG -static int check_addr(struct zd_usb *usb, zd_addr_t addr) -{ - u32 base = ZD_ADDR_BASE(addr); - u32 offset = ZD_OFFSET(addr); - - if ((u32)addr & ADDR_ZERO_MASK) - goto invalid_address; - switch (base) { - case USB_BASE: - break; - case CR_BASE: - if (offset > CR_MAX_OFFSET) { - dev_dbg(zd_usb_dev(usb), - "CR offset %#010x larger than" - " CR_MAX_OFFSET %#10x\n", - offset, CR_MAX_OFFSET); - goto invalid_address; - } - if (offset & 1) { - dev_dbg(zd_usb_dev(usb), - "CR offset %#010x is not a multiple of 2\n", - offset); - goto invalid_address; - } - break; - case E2P_BASE: - if (offset > E2P_MAX_OFFSET) { - dev_dbg(zd_usb_dev(usb), - "E2P offset %#010x larger than" - " E2P_MAX_OFFSET %#010x\n", - offset, E2P_MAX_OFFSET); - goto invalid_address; - } - break; - case FW_BASE: - if (!usb->fw_base_offset) { - dev_dbg(zd_usb_dev(usb), - "ERROR: fw base offset has not been set\n"); - return -EAGAIN; - } - if (offset > FW_MAX_OFFSET) { - dev_dbg(zd_usb_dev(usb), - "FW offset %#10x is larger than" - " FW_MAX_OFFSET %#010x\n", - offset, FW_MAX_OFFSET); - goto invalid_address; - } - break; - default: - dev_dbg(zd_usb_dev(usb), - "address has unsupported base %#010x\n", addr); - goto invalid_address; - } - - return 0; -invalid_address: - dev_dbg(zd_usb_dev(usb), - "ERROR: invalid address: %#010x\n", addr); - return -EINVAL; -} -#endif /* DEBUG */ - -static u16 usb_addr(struct zd_usb *usb, zd_addr_t addr) -{ - u32 base; - u16 offset; - - base = ZD_ADDR_BASE(addr); - offset = ZD_OFFSET(addr); - - ZD_ASSERT(check_addr(usb, addr) == 0); - - switch (base) { - case CR_BASE: - offset += CR_START; - break; - case E2P_BASE: - offset += E2P_START + E2P_DATA_OFFSET; - break; - case FW_BASE: - offset += usb->fw_base_offset; - break; - } - - return offset; -} - /* USB device initialization */ static int request_fw_file( @@ -858,7 +768,7 @@ static inline void init_usb_interrupt(struct zd_usb *usb) spin_lock_init(&intr->lock); intr->interval = int_urb_interval(zd_usb_to_usbdev(usb)); init_completion(&intr->read_regs.completion); - intr->read_regs.cr_int_addr = cpu_to_le16(usb_addr(usb, CR_INTERRUPT)); + intr->read_regs.cr_int_addr = cpu_to_le16((u16)CR_INTERRUPT); } static inline void init_usb_rx(struct zd_usb *usb) @@ -890,22 +800,6 @@ void zd_usb_init(struct zd_usb *usb, struct net_device *netdev, init_usb_rx(usb); } -int zd_usb_init_hw(struct zd_usb *usb) -{ - int r; - struct zd_chip *chip = zd_usb_to_chip(usb); - - ZD_ASSERT(mutex_is_locked(&chip->mutex)); - r = zd_ioread16_locked(chip, &usb->fw_base_offset, - USB_REG(FW_START + FW_REGS_ADDR_OFFSET)); - if (r) - return r; - dev_dbg_f(zd_usb_dev(usb), "fw_base_offset: %#06hx\n", - usb->fw_base_offset); - - return 0; -} - void zd_usb_clear(struct zd_usb *usb) { usb_set_intfdata(usb->intf, NULL); @@ -1253,7 +1147,7 @@ int zd_usb_ioread16v(struct zd_usb *usb, u16 *values, return -ENOMEM; req->id = cpu_to_le16(USB_REQ_READ_REGS); for (i = 0; i < count; i++) - req->addr[i] = cpu_to_le16(usb_addr(usb, addresses[i])); + req->addr[i] = cpu_to_le16((u16)addresses[i]); udev = zd_usb_to_usbdev(usb); prepare_read_regs_int(usb); @@ -1318,7 +1212,7 @@ int zd_usb_iowrite16v(struct zd_usb *usb, const struct zd_ioreq16 *ioreqs, req->id = cpu_to_le16(USB_REQ_WRITE_REGS); for (i = 0; i < count; i++) { struct reg_data *rw = &req->reg_writes[i]; - rw->addr = cpu_to_le16(usb_addr(usb, ioreqs[i].addr)); + rw->addr = cpu_to_le16((u16)ioreqs[i].addr); rw->value = cpu_to_le16(ioreqs[i].value); } diff --git a/drivers/net/wireless/zd1211rw/zd_usb.h b/drivers/net/wireless/zd1211rw/zd_usb.h index 317d37c36679..506ea6a74393 100644 --- a/drivers/net/wireless/zd1211rw/zd_usb.h +++ b/drivers/net/wireless/zd1211rw/zd_usb.h @@ -25,7 +25,6 @@ #include #include "zd_def.h" -#include "zd_types.h" enum devicetype { DEVICE_ZD1211 = 0, @@ -181,15 +180,14 @@ struct zd_usb_tx { spinlock_t lock; }; -/* Contains the usb parts. The structure doesn't require a lock, because intf - * and fw_base_offset, will not be changed after initialization. +/* Contains the usb parts. The structure doesn't require a lock because intf + * will not be changed after initialization. */ struct zd_usb { struct zd_usb_interrupt intr; struct zd_usb_rx rx; struct zd_usb_tx tx; struct usb_interface *intf; - u16 fw_base_offset; }; #define zd_usb_dev(usb) (&usb->intf->dev) -- cgit v1.2.2