From 6ccbb92ead9379d7de2cc25cd950d15a8d22e0c9 Mon Sep 17 00:00:00 2001 From: Juuso Oikarinen Date: Fri, 26 Mar 2010 12:53:23 +0200 Subject: wl1271: Disable connection monitoring while not associated The wl1271 does not support disabling the connection monitor feature. Perform the next best thing by increasing the beacon-loss threshold and BSS_LOSE event timeout to the maximum values. This is needed, because we really don't want any random probe-requests during scanning or especially while in ad-hoc mode and not beaconing. Signed-off-by: Juuso Oikarinen Reviewed-by: Teemu Paasikivi Signed-off-by: Luciano Coelho Signed-off-by: John W. Linville --- drivers/net/wireless/wl12xx/wl1271_acx.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) (limited to 'drivers/net/wireless/wl12xx/wl1271_acx.c') diff --git a/drivers/net/wireless/wl12xx/wl1271_acx.c b/drivers/net/wireless/wl12xx/wl1271_acx.c index 7e337cea9905..e7d11811a907 100644 --- a/drivers/net/wireless/wl12xx/wl1271_acx.c +++ b/drivers/net/wireless/wl12xx/wl1271_acx.c @@ -504,12 +504,17 @@ out: return ret; } -int wl1271_acx_conn_monit_params(struct wl1271 *wl) +#define ACX_CONN_MONIT_DISABLE_VALUE 0xffffffff + +int wl1271_acx_conn_monit_params(struct wl1271 *wl, bool enable) { struct acx_conn_monit_params *acx; + u32 threshold = ACX_CONN_MONIT_DISABLE_VALUE; + u32 timeout = ACX_CONN_MONIT_DISABLE_VALUE; int ret; - wl1271_debug(DEBUG_ACX, "acx connection monitor parameters"); + wl1271_debug(DEBUG_ACX, "acx connection monitor parameters: %s", + enable ? "enabled" : "disabled"); acx = kzalloc(sizeof(*acx), GFP_KERNEL); if (!acx) { @@ -517,8 +522,13 @@ int wl1271_acx_conn_monit_params(struct wl1271 *wl) goto out; } - acx->synch_fail_thold = cpu_to_le32(wl->conf.conn.synch_fail_thold); - acx->bss_lose_timeout = cpu_to_le32(wl->conf.conn.bss_lose_timeout); + if (enable) { + threshold = wl->conf.conn.synch_fail_thold; + timeout = wl->conf.conn.bss_lose_timeout; + } + + acx->synch_fail_thold = cpu_to_le32(threshold); + acx->bss_lose_timeout = cpu_to_le32(timeout); ret = wl1271_cmd_configure(wl, ACX_CONN_MONIT_PARAMS, acx, sizeof(*acx)); -- cgit v1.2.2 From c18995540cc4d2c84d130581b8b6720b22ca16b5 Mon Sep 17 00:00:00 2001 From: Juuso Oikarinen Date: Fri, 26 Mar 2010 12:53:32 +0200 Subject: wl1271: Enable hardware keep alive messages This patch will enable the hardware keep-alive mode, configure the required template, configure keep-alive parameters, and re-order JOIN's and ACX_AID in such a way that the keep-alive is activated. Signed-off-by: Juuso Oikarinen Reviewed-by: Luciano Coelho Signed-off-by: Luciano Coelho Signed-off-by: John W. Linville --- drivers/net/wireless/wl12xx/wl1271_acx.c | 55 ++++++++++++++++++++++++++++++++ 1 file changed, 55 insertions(+) (limited to 'drivers/net/wireless/wl12xx/wl1271_acx.c') diff --git a/drivers/net/wireless/wl12xx/wl1271_acx.c b/drivers/net/wireless/wl12xx/wl1271_acx.c index e7d11811a907..8f0bd5bee6f9 100644 --- a/drivers/net/wireless/wl12xx/wl1271_acx.c +++ b/drivers/net/wireless/wl12xx/wl1271_acx.c @@ -1139,3 +1139,58 @@ out: kfree(acx); return ret; } + +int wl1271_acx_keep_alive_mode(struct wl1271 *wl, bool enable) +{ + struct wl1271_acx_keep_alive_mode *acx = NULL; + int ret = 0; + + wl1271_debug(DEBUG_ACX, "acx keep alive mode: %d", enable); + + acx = kzalloc(sizeof(*acx), GFP_KERNEL); + if (!acx) { + ret = -ENOMEM; + goto out; + } + + acx->enabled = enable; + + ret = wl1271_cmd_configure(wl, ACX_KEEP_ALIVE_MODE, acx, sizeof(*acx)); + if (ret < 0) { + wl1271_warning("acx keep alive mode failed: %d", ret); + goto out; + } + +out: + kfree(acx); + return ret; +} +int wl1271_acx_keep_alive_config(struct wl1271 *wl, u8 index, u8 tpl_valid) +{ + struct wl1271_acx_keep_alive_config *acx = NULL; + int ret = 0; + + wl1271_debug(DEBUG_ACX, "acx keep alive config"); + + acx = kzalloc(sizeof(*acx), GFP_KERNEL); + if (!acx) { + ret = -ENOMEM; + goto out; + } + + acx->period = cpu_to_le32(wl->conf.conn.keep_alive_interval); + acx->index = index; + acx->tpl_validation = tpl_valid; + acx->trigger = ACX_KEEP_ALIVE_NO_TX; + + ret = wl1271_cmd_configure(wl, ACX_SET_KEEP_ALIVE_CONFIG, + acx, sizeof(*acx)); + if (ret < 0) { + wl1271_warning("acx keep alive config failed: %d", ret); + goto out; + } + +out: + kfree(acx); + return ret; +} -- cgit v1.2.2 From ebba60c66b3aa321a84c9a90a343c91fde972066 Mon Sep 17 00:00:00 2001 From: Juuso Oikarinen Date: Thu, 1 Apr 2010 11:38:20 +0300 Subject: wl1271: Use minimum rate for each band for control messages Currently the mac80211 is not telling a hardware rate controlled driver a rate to use for association frames etc. So to be safe, use the lowest rate of each band for communication. Signed-off-by: Juuso Oikarinen Reviewed-by: Teemu Paasikivi Signed-off-by: Luciano Coelho Signed-off-by: John W. Linville --- drivers/net/wireless/wl12xx/wl1271_acx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/wireless/wl12xx/wl1271_acx.c') diff --git a/drivers/net/wireless/wl12xx/wl1271_acx.c b/drivers/net/wireless/wl12xx/wl1271_acx.c index 8f0bd5bee6f9..621c94691e7e 100644 --- a/drivers/net/wireless/wl12xx/wl1271_acx.c +++ b/drivers/net/wireless/wl12xx/wl1271_acx.c @@ -802,7 +802,7 @@ int wl1271_acx_rate_policies(struct wl1271 *wl) /* configure one basic rate class */ idx = ACX_TX_BASIC_RATE; - acx->rate_class[idx].enabled_rates = cpu_to_le32(wl->basic_rate_set); + acx->rate_class[idx].enabled_rates = cpu_to_le32(wl->basic_rate); acx->rate_class[idx].short_retry_limit = c->short_retry_limit; acx->rate_class[idx].long_retry_limit = c->long_retry_limit; acx->rate_class[idx].aflags = c->aflags; -- cgit v1.2.2 From 00236aedf1d2c49a18ae9ea00698d97705ff7289 Mon Sep 17 00:00:00 2001 From: Juuso Oikarinen Date: Fri, 9 Apr 2010 11:07:30 +0300 Subject: wl1271: Add support for connection quality monitoring This patch will add support for connection quality monitoring by configuring rssi triggers to the firmware, and enabling the firmware rssi trigger functionality. Signed-off-by: Juuso Oikarinen Reviewed-by: Teemu Paasikivi Signed-off-by: Luciano Coelho Signed-off-by: John W. Linville --- drivers/net/wireless/wl12xx/wl1271_acx.c | 71 ++++++++++++++++++++++++++++++++ 1 file changed, 71 insertions(+) (limited to 'drivers/net/wireless/wl12xx/wl1271_acx.c') diff --git a/drivers/net/wireless/wl12xx/wl1271_acx.c b/drivers/net/wireless/wl12xx/wl1271_acx.c index 621c94691e7e..1a6b2ec1db58 100644 --- a/drivers/net/wireless/wl12xx/wl1271_acx.c +++ b/drivers/net/wireless/wl12xx/wl1271_acx.c @@ -1165,6 +1165,7 @@ out: kfree(acx); return ret; } + int wl1271_acx_keep_alive_config(struct wl1271 *wl, u8 index, u8 tpl_valid) { struct wl1271_acx_keep_alive_config *acx = NULL; @@ -1194,3 +1195,73 @@ out: kfree(acx); return ret; } + +int wl1271_acx_rssi_snr_trigger(struct wl1271 *wl, bool enable, + s16 thold, u8 hyst) +{ + struct wl1271_acx_rssi_snr_trigger *acx = NULL; + int ret = 0; + + wl1271_debug(DEBUG_ACX, "acx rssi snr trigger"); + + acx = kzalloc(sizeof(*acx), GFP_KERNEL); + if (!acx) { + ret = -ENOMEM; + goto out; + } + + wl->last_rssi_event = -1; + + acx->pacing = cpu_to_le16(wl->conf.roam_trigger.trigger_pacing); + acx->metric = WL1271_ACX_TRIG_METRIC_RSSI_BEACON; + acx->type = WL1271_ACX_TRIG_TYPE_EDGE; + if (enable) + acx->enable = WL1271_ACX_TRIG_ENABLE; + else + acx->enable = WL1271_ACX_TRIG_DISABLE; + + acx->index = WL1271_ACX_TRIG_IDX_RSSI; + acx->dir = WL1271_ACX_TRIG_DIR_BIDIR; + acx->threshold = cpu_to_le16(thold); + acx->hysteresis = hyst; + + ret = wl1271_cmd_configure(wl, ACX_RSSI_SNR_TRIGGER, acx, sizeof(*acx)); + if (ret < 0) { + wl1271_warning("acx rssi snr trigger setting failed: %d", ret); + goto out; + } + +out: + kfree(acx); + return ret; +} + +int wl1271_acx_rssi_snr_avg_weights(struct wl1271 *wl) +{ + struct wl1271_acx_rssi_snr_avg_weights *acx = NULL; + struct conf_roam_trigger_settings *c = &wl->conf.roam_trigger; + int ret = 0; + + wl1271_debug(DEBUG_ACX, "acx rssi snr avg weights"); + + acx = kzalloc(sizeof(*acx), GFP_KERNEL); + if (!acx) { + ret = -ENOMEM; + goto out; + } + + acx->rssi_beacon = c->avg_weight_rssi_beacon; + acx->rssi_data = c->avg_weight_rssi_data; + acx->snr_beacon = c->avg_weight_snr_beacon; + acx->snr_data = c->avg_weight_snr_data; + + ret = wl1271_cmd_configure(wl, ACX_RSSI_SNR_WEIGHTS, acx, sizeof(*acx)); + if (ret < 0) { + wl1271_warning("acx rssi snr trigger weights failed: %d", ret); + goto out; + } + +out: + kfree(acx); + return ret; +} -- cgit v1.2.2