From ce39defb5c6312a89a0c7be48797d6fb8fe9abad Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Thu, 3 Nov 2011 08:44:41 +0200 Subject: wl12xx: change blocksize alignment quirk to negative SDIO blocksize alignment support is now the rule, not the exception. To simplify the code in patches to come, invert the meaning of the quirk to be negative (ie. the quirk is set if the device does _not_ support blocksize alignment). Signed-off-by: Luciano Coelho --- drivers/net/wireless/wl12xx/init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/wireless/wl12xx/init.c') diff --git a/drivers/net/wireless/wl12xx/init.c b/drivers/net/wireless/wl12xx/init.c index 14ff01efc0b1..c413abd26d1c 100644 --- a/drivers/net/wireless/wl12xx/init.c +++ b/drivers/net/wireless/wl12xx/init.c @@ -501,7 +501,7 @@ int wl1271_chip_specific_init(struct wl1271 *wl) if (wl->chip.id == CHIP_ID_1283_PG20) { u32 host_cfg_bitmap = HOST_IF_CFG_RX_FIFO_ENABLE; - if (wl->quirks & WL12XX_QUIRK_BLOCKSIZE_ALIGNMENT) + if (!(wl->quirks & WL12XX_QUIRK_NO_BLOCKSIZE_ALIGNMENT)) /* Enable SDIO padding */ host_cfg_bitmap |= HOST_IF_CFG_TX_PAD_TO_SDIO_BLK; -- cgit v1.2.2