From 89993890aeb8fe58b2d49b2661965524802ab73c Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Sun, 9 Mar 2008 22:49:04 +0100 Subject: rt2x00: Fix rt2400pci signal After sampling hundreds of RX frame descriptors, the results were conclusive: - The Ralink documentation regarding the SIGNAL and RSSI are wrong. It turns out that of the 5 BBR registers, we should not use BBR0 and BBR1 for SIGNAL and RSSI respectively, but actually BBR1 and BBR2. BBR0 does show values, but the exact meaning remains unclear, but they cannot be translated into a SIGNAL or RSSI field. BBR3, BBR4 and BBR5 are always 0, so their meaning is unknown. As it turns out, the reported SIGNAL is the PLCP value, this in contradiction to what was expected looking at rt2500pci which only reported the PLCP values for OFDM rates and bitrate values for CCK rates. This means we should let the driver raise the flag about the contents of the SIGNAL field so rt2x00lib can always do the right thing based on what the driver reports. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2500usb.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers/net/wireless/rt2x00/rt2500usb.c') diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index 8dfebfd695de..c8216d755835 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -1135,11 +1135,15 @@ static void rt2500usb_fill_rxdone(struct queue_entry *entry, /* * Obtain the status about this packet. + * When frame was received with an OFDM bitrate, + * the signal is the PLCP value. If it was received with + * a CCK bitrate the signal is the rate in 100kbit/s. */ + rxdesc->ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM); rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL); + rxdesc->signal_plcp = rxdesc->ofdm; rxdesc->rssi = rt2x00_get_field32(word1, RXD_W1_RSSI) - entry->queue->rt2x00dev->rssi_offset; - rxdesc->ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM); rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); rxdesc->my_bss = !!rt2x00_get_field32(word0, RXD_W0_MY_BSS); -- cgit v1.2.2