From 89b25f60e08180d7e00e6239398b467142aaec01 Mon Sep 17 00:00:00 2001 From: Helmut Schaa Date: Mon, 13 Dec 2010 12:33:36 +0100 Subject: rt2x00: Don't frequently reset beacon interval in AdHoc mode Commit 0204464329c17ba6d293e1899f71223599a0e582 "Check for specific changed flags when updating the erp config" changed the way in which a new beacon interval gets handled. However, due to a bug in rt2800usb and rt2800pci the beacon interval was reset during each scan, thus causing problems in AdHoc mode. Fix this by not cleaning up the beacon interval when killing the beacon queue but just prevent the device from sending out beacons. Reported-by: Wolfgang Kufner Signed-off-by: Helmut Schaa Acked-by: Gertjan van Wingerde Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2500pci.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers/net/wireless/rt2x00/rt2500pci.c') diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c index 3e7f20346243..ce9212f28207 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.c +++ b/drivers/net/wireless/rt2x00/rt2500pci.c @@ -1294,7 +1294,11 @@ static void rt2500pci_kill_tx_queue(struct data_queue *queue) u32 reg; if (queue->qid == QID_BEACON) { - rt2x00pci_register_write(rt2x00dev, CSR14, 0); + rt2x00pci_register_read(rt2x00dev, CSR14, ®); + rt2x00_set_field32(®, CSR14_TSF_COUNT, 0); + rt2x00_set_field32(®, CSR14_TBCN, 0); + rt2x00_set_field32(®, CSR14_BEACON_GEN, 0); + rt2x00pci_register_write(rt2x00dev, CSR14, reg); } else { rt2x00pci_register_read(rt2x00dev, TXCSR0, ®); rt2x00_set_field32(®, TXCSR0_ABORT, 1); -- cgit v1.2.2