From 2262054e74b4b26ed56a8535c1259f6c6c2862a4 Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Sun, 15 Aug 2010 08:38:38 +0200 Subject: pcmcia: remove obsolete and wrong comments What's worse than no comment? A wrong comment. Several PCMCIA device drivers contained the same comments, which were based on how the PCMCIA subsystem worked in the old days of 2.4., and which were originally part of a "dummy_cs" driver. These comments no longer matched at all what is happening now, and therefore should be removed. Tested-by: Wolfram Sang Signed-off-by: Dominik Brodowski --- drivers/net/wireless/hostap/hostap_cs.c | 8 -------- 1 file changed, 8 deletions(-) (limited to 'drivers/net/wireless/hostap') diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c index ba645701179a..bd8a4134edeb 100644 --- a/drivers/net/wireless/hostap/hostap_cs.c +++ b/drivers/net/wireless/hostap/hostap_cs.c @@ -466,9 +466,6 @@ static void prism2_detach(struct pcmcia_device *link) } -/* run after a CARD_INSERTION event is received to configure the PCMCIA - * socket and make the device available to the system */ - static int prism2_config_check(struct pcmcia_device *p_dev, void *priv_data) { if (p_dev->config_index == 0) @@ -530,11 +527,6 @@ static int prism2_config(struct pcmcia_device *link) if (ret) goto failed_unlock; - /* - * This actually configures the PCMCIA socket -- setting up - * the I/O windows and the interrupt mapping, and putting the - * card and host interface into "Memory and IO" mode. - */ ret = pcmcia_enable_device(link); if (ret) goto failed_unlock; -- cgit v1.2.2