From 8da81e52b743edac0bfbb7d0c1286f919b2f209b Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Mon, 2 Oct 2006 23:48:54 -0500 Subject: [PATCH] bcm43xx-softmac: Fix system hang for x86-64 with >1GB RAM The bcm43xx-softmac software currently fails when running on x86_64 systems with more than 1GB RAM and one of the card variants with 30-bit DMA addressing. This patch uses the address extension bits in the hardware to set the correct DMA mask for the specific card in use. Signed-off-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/bcm43xx/bcm43xx_dma.c | 28 +++++++++++++++++++++++----- drivers/net/wireless/bcm43xx/bcm43xx_dma.h | 17 +++++++++++++++++ drivers/net/wireless/bcm43xx/bcm43xx_main.c | 25 ++++++------------------- 3 files changed, 46 insertions(+), 24 deletions(-) (limited to 'drivers/net/wireless/bcm43xx') diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_dma.c b/drivers/net/wireless/bcm43xx/bcm43xx_dma.c index 76e3aed4b471..978ed099e285 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_dma.c +++ b/drivers/net/wireless/bcm43xx/bcm43xx_dma.c @@ -705,11 +705,30 @@ int bcm43xx_dma_init(struct bcm43xx_private *bcm) struct bcm43xx_dmaring *ring; int err = -ENOMEM; int dma64 = 0; - u32 sbtmstatehi; + u64 mask = bcm43xx_get_supported_dma_mask(bcm); + int nobits; - sbtmstatehi = bcm43xx_read32(bcm, BCM43xx_CIR_SBTMSTATEHIGH); - if (sbtmstatehi & BCM43xx_SBTMSTATEHIGH_DMA64BIT) + if (mask == DMA_64BIT_MASK) { dma64 = 1; + nobits = 64; + } else if (mask == DMA_32BIT_MASK) + nobits = 32; + else + nobits = 30; + err = pci_set_dma_mask(bcm->pci_dev, mask); + err |= pci_set_consistent_dma_mask(bcm->pci_dev, mask); + if (err) { +#ifdef CONFIG_BCM43XX_PIO + printk(KERN_WARNING PFX "DMA not supported on this device." + " Falling back to PIO.\n"); + bcm->__using_pio = 1; + return -ENOSYS; +#else + printk(KERN_ERR PFX "FATAL: DMA not supported and PIO not configured. " + "Please recompile the driver with PIO support.\n"); + return -ENODEV; +#endif /* CONFIG_BCM43XX_PIO */ + } /* setup TX DMA channels. */ ring = bcm43xx_setup_dmaring(bcm, 0, 1, dma64); @@ -755,8 +774,7 @@ int bcm43xx_dma_init(struct bcm43xx_private *bcm) dma->rx_ring3 = ring; } - dprintk(KERN_INFO PFX "%s DMA initialized\n", - dma64 ? "64-bit" : "32-bit"); + dprintk(KERN_INFO PFX "%d-bit DMA initialized\n", nobits); err = 0; out: return err; diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_dma.h b/drivers/net/wireless/bcm43xx/bcm43xx_dma.h index e04bcaddd1d0..ea16078cfe98 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_dma.h +++ b/drivers/net/wireless/bcm43xx/bcm43xx_dma.h @@ -314,6 +314,23 @@ int bcm43xx_dma_tx(struct bcm43xx_private *bcm, struct ieee80211_txb *txb); void bcm43xx_dma_rx(struct bcm43xx_dmaring *ring); +/* Helper function that returns the dma mask for this device. */ +static inline +u64 bcm43xx_get_supported_dma_mask(struct bcm43xx_private *bcm) +{ + int dma64 = bcm43xx_read32(bcm, BCM43xx_CIR_SBTMSTATEHIGH) & + BCM43xx_SBTMSTATEHIGH_DMA64BIT; + u16 mmio_base = bcm43xx_dmacontroller_base(dma64, 0); + u32 mask = BCM43xx_DMA32_TXADDREXT_MASK; + + if (dma64) + return DMA_64BIT_MASK; + bcm43xx_write32(bcm, mmio_base + BCM43xx_DMA32_TXCTL, mask); + if (bcm43xx_read32(bcm, mmio_base + BCM43xx_DMA32_TXCTL) & mask) + return DMA_32BIT_MASK; + return DMA_30BIT_MASK; +} + #else /* CONFIG_BCM43XX_DMA */ diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.c b/drivers/net/wireless/bcm43xx/bcm43xx_main.c index 7776b5c42ac7..a94c6d8826f8 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_main.c +++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.c @@ -2925,10 +2925,13 @@ static int bcm43xx_wireless_core_init(struct bcm43xx_private *bcm, bcm43xx_write16(bcm, 0x043C, 0x000C); if (active_wlcore) { - if (bcm43xx_using_pio(bcm)) + if (bcm43xx_using_pio(bcm)) { err = bcm43xx_pio_init(bcm); - else + } else { err = bcm43xx_dma_init(bcm); + if (err == -ENOSYS) + err = bcm43xx_pio_init(bcm); + } if (err) goto err_chip_cleanup; } @@ -3992,8 +3995,6 @@ static int bcm43xx_init_private(struct bcm43xx_private *bcm, struct net_device *net_dev, struct pci_dev *pci_dev) { - int err; - bcm43xx_set_status(bcm, BCM43xx_STAT_UNINIT); bcm->ieee = netdev_priv(net_dev); bcm->softmac = ieee80211_priv(net_dev); @@ -4011,22 +4012,8 @@ static int bcm43xx_init_private(struct bcm43xx_private *bcm, (void (*)(unsigned long))bcm43xx_interrupt_tasklet, (unsigned long)bcm); tasklet_disable_nosync(&bcm->isr_tasklet); - if (modparam_pio) { + if (modparam_pio) bcm->__using_pio = 1; - } else { - err = pci_set_dma_mask(pci_dev, DMA_30BIT_MASK); - err |= pci_set_consistent_dma_mask(pci_dev, DMA_30BIT_MASK); - if (err) { -#ifdef CONFIG_BCM43XX_PIO - printk(KERN_WARNING PFX "DMA not supported. Falling back to PIO.\n"); - bcm->__using_pio = 1; -#else - printk(KERN_ERR PFX "FATAL: DMA not supported and PIO not configured. " - "Recompile the driver with PIO support, please.\n"); - return -ENODEV; -#endif /* CONFIG_BCM43XX_PIO */ - } - } bcm->rts_threshold = BCM43xx_DEFAULT_RTS_THRESHOLD; /* default to sw encryption for now */ -- cgit v1.2.2