From 85519a65fd1100ceede7318a89f77a219c69c6ac Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Wed, 29 Oct 2008 08:30:53 -0400 Subject: ath5k: correct misspelling in debug help Change "mamagement" to "management" Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/debug.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/wireless/ath5k') diff --git a/drivers/net/wireless/ath5k/debug.c b/drivers/net/wireless/ath5k/debug.c index 8f92d670f614..19980cbd5d5f 100644 --- a/drivers/net/wireless/ath5k/debug.c +++ b/drivers/net/wireless/ath5k/debug.c @@ -339,7 +339,7 @@ static struct { { ATH5K_DEBUG_BEACON, "beacon", "beacon handling" }, { ATH5K_DEBUG_CALIBRATE, "calib", "periodic calibration" }, { ATH5K_DEBUG_TXPOWER, "txpower", "transmit power setting" }, - { ATH5K_DEBUG_LED, "led", "LED mamagement" }, + { ATH5K_DEBUG_LED, "led", "LED management" }, { ATH5K_DEBUG_DUMP_RX, "dumprx", "print received skb content" }, { ATH5K_DEBUG_DUMP_TX, "dumptx", "print transmit skb content" }, { ATH5K_DEBUG_DUMPBANDS, "dumpbands", "dump bands" }, -- cgit v1.2.2 From 7d19267b8d1e12c0baebf9be96e04cddffe63f67 Mon Sep 17 00:00:00 2001 From: Elias Oltmanns Date: Wed, 29 Oct 2008 14:25:42 +0100 Subject: ath5k: Fix reset sequence for AR5212 in general and RF5111 in particular Take care to handle register 0xa228 exactly as in the HAL released by Atheros. This change is required to make ath5k work again on my system since commit 2203d6be (ath5k: Misc hw_reset updates), thus fixing a regression in 2.6.27 and therefore hopefully eligible for inclusion into a stable release. v2: Only overwrite initial register values on later revisions of AR5212 chips. v3: Use standard macros to manipulate the register. Signed-off-by: Elias Oltmanns Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/initvals.c | 2 ++ drivers/net/wireless/ath5k/reset.c | 22 +++++++--------------- 2 files changed, 9 insertions(+), 15 deletions(-) (limited to 'drivers/net/wireless/ath5k') diff --git a/drivers/net/wireless/ath5k/initvals.c b/drivers/net/wireless/ath5k/initvals.c index ea2e1a20b499..ceaa6c475c06 100644 --- a/drivers/net/wireless/ath5k/initvals.c +++ b/drivers/net/wireless/ath5k/initvals.c @@ -806,6 +806,8 @@ static const struct ath5k_ini_mode ar5212_rf5111_ini_mode_end[] = { { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, { AR5K_PHY(642), { 0xd03e6788, 0xd03e6788, 0xd03e6788, 0xd03e6788, 0xd03e6788 } }, + { 0xa228, + { 0x000001b5, 0x000001b5, 0x000001b5, 0x000001b5, 0x000001b5 } }, { 0xa23c, { 0x13c889af, 0x13c889af, 0x13c889af, 0x13c889af, 0x13c889af } }, }; diff --git a/drivers/net/wireless/ath5k/reset.c b/drivers/net/wireless/ath5k/reset.c index 8f1886834e61..1b6d45b6772d 100644 --- a/drivers/net/wireless/ath5k/reset.c +++ b/drivers/net/wireless/ath5k/reset.c @@ -537,9 +537,10 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, mdelay(1); /* - * Write some more initial register settings + * Write some more initial register settings for revised chips */ - if (ah->ah_version == AR5K_AR5212) { + if (ah->ah_version == AR5K_AR5212 && + ah->ah_phy_revision > 0x41) { ath5k_hw_reg_write(ah, 0x0002a002, 0x982c); if (channel->hw_value == CHANNEL_G) @@ -558,19 +559,10 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, else ath5k_hw_reg_write(ah, 0x00000000, 0x994c); - /* Some bits are disabled here, we know nothing about - * register 0xa228 yet, most of the times this ends up - * with a value 0x9b5 -haven't seen any dump with - * a different value- */ - /* Got this from decompiling binary HAL */ - data = ath5k_hw_reg_read(ah, 0xa228); - data &= 0xfffffdff; - ath5k_hw_reg_write(ah, data, 0xa228); - - data = ath5k_hw_reg_read(ah, 0xa228); - data &= 0xfffe03ff; - ath5k_hw_reg_write(ah, data, 0xa228); - data = 0; + /* Got this from legacy-hal */ + AR5K_REG_DISABLE_BITS(ah, 0xa228, 0x200); + + AR5K_REG_MASKED_BITS(ah, 0xa228, 0x800, 0xfffe03ff); /* Just write 0x9b5 ? */ /* ath5k_hw_reg_write(ah, 0x000009b5, 0xa228); */ -- cgit v1.2.2 From 063279062a8c530cc90fb77797db16c49c905b26 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Wed, 29 Oct 2008 08:30:56 -0400 Subject: ath5k: honor FIF_BCN_PRBRESP_PROMISC in STA mode We were setting RX_FILTER_BEACON even after entering STA mode, which leads to a lot of unnecessary wakeups. This should fix the bug "Ath5k driver has too many interrupts per second at idle" at http://bugzilla.kernel.org/show_bug.cgi?id=11749. Signed-off-by: Bob Copeland Acked-by: Nick Kossifidis Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/base.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers/net/wireless/ath5k') diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index cfd4d052d666..9e47d727e220 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -2942,10 +2942,8 @@ static void ath5k_configure_filter(struct ieee80211_hw *hw, sc->opmode != NL80211_IFTYPE_MESH_POINT && test_bit(ATH_STAT_PROMISC, sc->status)) rfilt |= AR5K_RX_FILTER_PROM; - if (sc->opmode == NL80211_IFTYPE_STATION || - sc->opmode == NL80211_IFTYPE_ADHOC) { + if (sc->opmode == NL80211_IFTYPE_ADHOC) rfilt |= AR5K_RX_FILTER_BEACON; - } /* Set filters */ ath5k_hw_set_rx_filter(ah,rfilt); -- cgit v1.2.2