From 20bd2a0952d01ba82a99b3f22d46e3832c255529 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sat, 31 Jul 2010 00:12:00 +0200 Subject: ath9k_hw: clean up per-channel calibration data The noise floor history buffer is currently not kept per channel, which can lead to problems when changing channels from a clean channel to a noisy one. Also when switching from HT20 to HT40, the noise floor history buffer is full of measurements, but none of them contain data for the extension channel, which it needs quite a bit of time to recover from. This patch puts all the per-channel calibration data into a single data structure, and gives the the driver control over whether that is used per-channel or even not used for some channels. For ath9k_htc, I decided to keep this per-channel in order to avoid creating regressions. For ath9k, the data is kept only for the operating channel, which saves some space. ath9k_hw takes care of wiping old data when the operating channel or its channel flags change. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/xmit.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/wireless/ath/ath9k/xmit.c') diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 501b72821b4d..700ba8dee5a5 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -1181,7 +1181,7 @@ void ath_drain_all_txq(struct ath_softc *sc, bool retry_tx) "Failed to stop TX DMA. Resetting hardware!\n"); spin_lock_bh(&sc->sc_resetlock); - r = ath9k_hw_reset(ah, sc->sc_ah->curchan, false); + r = ath9k_hw_reset(ah, sc->sc_ah->curchan, ah->caldata, false); if (r) ath_print(common, ATH_DBG_FATAL, "Unable to reset hardware; reset status %d\n", -- cgit v1.2.2