From 6f158d5f29b420438e907d72cb111ddb9973f00a Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Fri, 12 Dec 2008 22:00:49 -0800 Subject: sfc: Add support for SFN4111T Add support code for the SFN4111T 100/1000/10GBASE-T reference design, based in part on the existing code for the SFE4001. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/sfc/boards.c | 2 + drivers/net/sfc/boards.h | 7 +- drivers/net/sfc/falcon.c | 7 ++ drivers/net/sfc/falcon_hwdefs.h | 2 + drivers/net/sfc/selftest.c | 11 ++- drivers/net/sfc/sfe4001.c | 153 ++++++++++++++++++++++++++++++++-------- drivers/net/sfc/workarounds.h | 3 +- 7 files changed, 150 insertions(+), 35 deletions(-) (limited to 'drivers/net/sfc') diff --git a/drivers/net/sfc/boards.c b/drivers/net/sfc/boards.c index 08fa4e35742b..64903496aa9a 100644 --- a/drivers/net/sfc/boards.c +++ b/drivers/net/sfc/boards.c @@ -241,6 +241,8 @@ struct efx_board_data { static struct efx_board_data board_data[] = { { EFX_BOARD_SFE4001, "SFE4001", "10GBASE-T adapter", sfe4001_init }, { EFX_BOARD_SFE4002, "SFE4002", "XFP adapter", sfe4002_init }, + { EFX_BOARD_SFN4111T, "SFN4111T", "100/1000/10GBASE-T adapter", + sfn4111t_init }, }; void efx_set_board_info(struct efx_nic *efx, u16 revision_info) diff --git a/drivers/net/sfc/boards.h b/drivers/net/sfc/boards.h index 5e0dde59c44c..d93c6c6a7548 100644 --- a/drivers/net/sfc/boards.h +++ b/drivers/net/sfc/boards.h @@ -12,11 +12,16 @@ /* Board IDs (must fit in 8 bits) */ enum efx_board_type { - EFX_BOARD_SFE4001 = 1, /* SFE4001 (10GBASE-T) */ + EFX_BOARD_SFE4001 = 1, EFX_BOARD_SFE4002 = 2, + EFX_BOARD_SFN4111T = 0x51, }; extern void efx_set_board_info(struct efx_nic *efx, u16 revision_info); + +/* SFE4001 (10GBASE-T) */ extern int sfe4001_init(struct efx_nic *efx); +/* SFN4111T (100/1000/10GBASE-T) */ +extern int sfn4111t_init(struct efx_nic *efx); #endif diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c index db8e147f00b2..84771a792099 100644 --- a/drivers/net/sfc/falcon.c +++ b/drivers/net/sfc/falcon.c @@ -2971,6 +2971,13 @@ int falcon_init_nic(struct efx_nic *efx) EFX_SET_OWORD_FIELD(temp, ONCHIP_SRAM, 1); falcon_write(efx, &temp, NIC_STAT_REG); + /* Set the source of the GMAC clock */ + if (falcon_rev(efx) == FALCON_REV_B0) { + falcon_read(efx, &temp, GPIO_CTL_REG_KER); + EFX_SET_OWORD_FIELD(temp, GPIO_USE_NIC_CLK, true); + falcon_write(efx, &temp, GPIO_CTL_REG_KER); + } + /* Set buffer table mode */ EFX_POPULATE_OWORD_1(temp, BUF_TBL_MODE, BUF_TBL_MODE_FULL); falcon_write(efx, &temp, BUF_TBL_CFG_REG_KER); diff --git a/drivers/net/sfc/falcon_hwdefs.h b/drivers/net/sfc/falcon_hwdefs.h index a58c627f51aa..bda8d5bb72e4 100644 --- a/drivers/net/sfc/falcon_hwdefs.h +++ b/drivers/net/sfc/falcon_hwdefs.h @@ -136,6 +136,8 @@ /* GPIO control register */ #define GPIO_CTL_REG_KER 0x0210 +#define GPIO_USE_NIC_CLK_LBN (30) +#define GPIO_USE_NIC_CLK_WIDTH (1) #define GPIO_OUTPUTS_LBN (16) #define GPIO_OUTPUTS_WIDTH (4) #define GPIO_INPUTS_LBN (8) diff --git a/drivers/net/sfc/selftest.c b/drivers/net/sfc/selftest.c index 578b7f410ed4..6bb09f263b33 100644 --- a/drivers/net/sfc/selftest.c +++ b/drivers/net/sfc/selftest.c @@ -702,8 +702,15 @@ int efx_offline_test(struct efx_nic *efx, */ mutex_lock(&efx->mac_lock); efx->port_inhibited = true; - if (efx->loopback_modes) - efx->loopback_mode = __ffs(efx->loopback_modes); + if (efx->loopback_modes) { + /* We need the 312 clock from the PHY to test the XMAC + * registers, so move into XGMII loopback if available */ + if (efx->loopback_modes & (1 << LOOPBACK_XGMII)) + efx->loopback_mode = LOOPBACK_XGMII; + else + efx->loopback_mode = __ffs(efx->loopback_modes); + } + __efx_reconfigure_port(efx); mutex_unlock(&efx->mac_lock); diff --git a/drivers/net/sfc/sfe4001.c b/drivers/net/sfc/sfe4001.c index af652844baee..16b80acb9992 100644 --- a/drivers/net/sfc/sfe4001.c +++ b/drivers/net/sfc/sfe4001.c @@ -1,6 +1,6 @@ /**************************************************************************** * Driver for Solarflare Solarstorm network controllers and boards - * Copyright 2007 Solarflare Communications Inc. + * Copyright 2007-2008 Solarflare Communications Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 as published @@ -8,10 +8,21 @@ */ /***************************************************************************** - * Support for the SFE4001 NIC: driver code for the PCA9539 I/O expander that - * controls the PHY power rails, and for the MAX6647 temp. sensor used to check - * the PHY + * Support for the SFE4001 and SFN4111T NICs. + * + * The SFE4001 does not power-up fully at reset due to its high power + * consumption. We control its power via a PCA9539 I/O expander. + * Both boards have a MAX6647 temperature monitor which we expose to + * the lm90 driver. + * + * This also provides minimal support for reflashing the PHY, which is + * initiated by resetting it with the FLASH_CFG_1 pin pulled down. + * On SFE4001 rev A2 and later this is connected to the 3V3X output of + * the IO-expander; on the SFN4111T it is connected to Falcon's GPIO3. + * We represent reflash mode as PHY_MODE_SPECIAL and make it mutually + * exclusive with the network device being open. */ + #include #include "net_driver.h" #include "efx.h" @@ -171,39 +182,30 @@ fail_on: return rc; } -static int sfe4001_check_hw(struct efx_nic *efx) +static int sfn4111t_reset(struct efx_nic *efx) { - s32 status; + efx_oword_t reg; - /* If XAUI link is up then do not monitor */ - if (EFX_WORKAROUND_7884(efx) && efx->mac_up) - return 0; + /* GPIO pins are also used for I2C, so block that temporarily */ + mutex_lock(&efx->i2c_adap.bus_lock); - /* Check the powered status of the PHY. Lack of power implies that - * the MAX6647 has shut down power to it, probably due to a temp. - * alarm. Reading the power status rather than the MAX6647 status - * directly because the later is read-to-clear and would thus - * start to power up the PHY again when polled, causing us to blip - * the power undesirably. - * We know we can read from the IO expander because we did - * it during power-on. Assume failure now is bad news. */ - status = i2c_smbus_read_byte_data(efx->board_info.ioexp_client, P1_IN); - if (status >= 0 && - (status & ((1 << P1_AFE_PWD_LBN) | (1 << P1_DSP_PWD25_LBN))) != 0) - return 0; + falcon_read(efx, ®, GPIO_CTL_REG_KER); + EFX_SET_OWORD_FIELD(reg, GPIO2_OEN, true); + EFX_SET_OWORD_FIELD(reg, GPIO2_OUT, false); + falcon_write(efx, ®, GPIO_CTL_REG_KER); + msleep(1000); + EFX_SET_OWORD_FIELD(reg, GPIO2_OUT, true); + EFX_SET_OWORD_FIELD(reg, GPIO3_OEN, true); + EFX_SET_OWORD_FIELD(reg, GPIO3_OUT, + !(efx->phy_mode & PHY_MODE_SPECIAL)); + falcon_write(efx, ®, GPIO_CTL_REG_KER); - /* Use board power control, not PHY power control */ - sfe4001_poweroff(efx); - efx->phy_mode = PHY_MODE_OFF; + mutex_unlock(&efx->i2c_adap.bus_lock); - return (status < 0) ? -EIO : -ERANGE; + ssleep(1); + return 0; } -/* On SFE4001 rev A2 and later, we can control the FLASH_CFG_1 pin - * using the 3V3X output of the IO-expander. Allow the user to set - * this when the device is stopped, and keep it stopped then. - */ - static ssize_t show_phy_flash_cfg(struct device *dev, struct device_attribute *attr, char *buf) { @@ -231,7 +233,10 @@ static ssize_t set_phy_flash_cfg(struct device *dev, err = -EBUSY; } else { efx->phy_mode = new_mode; - err = sfe4001_poweron(efx); + if (efx->board_info.type == EFX_BOARD_SFE4001) + err = sfe4001_poweron(efx); + else + err = sfn4111t_reset(efx); efx_reconfigure_port(efx); } rtnl_unlock(); @@ -251,6 +256,34 @@ static void sfe4001_fini(struct efx_nic *efx) i2c_unregister_device(efx->board_info.hwmon_client); } +static int sfe4001_check_hw(struct efx_nic *efx) +{ + s32 status; + + /* If XAUI link is up then do not monitor */ + if (EFX_WORKAROUND_7884(efx) && efx->mac_up) + return 0; + + /* Check the powered status of the PHY. Lack of power implies that + * the MAX6647 has shut down power to it, probably due to a temp. + * alarm. Reading the power status rather than the MAX6647 status + * directly because the later is read-to-clear and would thus + * start to power up the PHY again when polled, causing us to blip + * the power undesirably. + * We know we can read from the IO expander because we did + * it during power-on. Assume failure now is bad news. */ + status = i2c_smbus_read_byte_data(efx->board_info.ioexp_client, P1_IN); + if (status >= 0 && + (status & ((1 << P1_AFE_PWD_LBN) | (1 << P1_DSP_PWD25_LBN))) != 0) + return 0; + + /* Use board power control, not PHY power control */ + sfe4001_poweroff(efx); + efx->phy_mode = PHY_MODE_OFF; + + return (status < 0) ? -EIO : -ERANGE; +} + static struct i2c_board_info sfe4001_hwmon_info = { I2C_BOARD_INFO("max6647", 0x4e), .irq = -1, @@ -312,3 +345,61 @@ fail_hwmon: i2c_unregister_device(efx->board_info.hwmon_client); return rc; } + +static int sfn4111t_check_hw(struct efx_nic *efx) +{ + s32 status; + + /* If XAUI link is up then do not monitor */ + if (EFX_WORKAROUND_7884(efx) && efx->mac_up) + return 0; + + /* Test LHIGH, RHIGH, FAULT, EOT and IOT alarms */ + status = i2c_smbus_read_byte_data(efx->board_info.hwmon_client, + MAX664X_REG_RSL); + if (status < 0) + return -EIO; + if (status & 0x57) + return -ERANGE; + return 0; +} + +static void sfn4111t_fini(struct efx_nic *efx) +{ + EFX_INFO(efx, "%s\n", __func__); + + device_remove_file(&efx->pci_dev->dev, &dev_attr_phy_flash_cfg); + i2c_unregister_device(efx->board_info.hwmon_client); +} + +static struct i2c_board_info sfn4111t_hwmon_info = { + I2C_BOARD_INFO("max6647", 0x4e), + .irq = -1, +}; + +int sfn4111t_init(struct efx_nic *efx) +{ + int rc; + + efx->board_info.hwmon_client = + i2c_new_device(&efx->i2c_adap, &sfn4111t_hwmon_info); + if (!efx->board_info.hwmon_client) + return -EIO; + + efx->board_info.blink = tenxpress_phy_blink; + efx->board_info.monitor = sfn4111t_check_hw; + efx->board_info.fini = sfn4111t_fini; + + rc = device_create_file(&efx->pci_dev->dev, &dev_attr_phy_flash_cfg); + if (rc) + goto fail_hwmon; + + if (efx->phy_mode & PHY_MODE_SPECIAL) + sfn4111t_reset(efx); + + return 0; + +fail_hwmon: + i2c_unregister_device(efx->board_info.hwmon_client); + return rc; +} diff --git a/drivers/net/sfc/workarounds.h b/drivers/net/sfc/workarounds.h index ecebff211a74..82e03e1d7371 100644 --- a/drivers/net/sfc/workarounds.h +++ b/drivers/net/sfc/workarounds.h @@ -17,6 +17,7 @@ #define EFX_WORKAROUND_ALWAYS(efx) 1 #define EFX_WORKAROUND_FALCON_A(efx) (falcon_rev(efx) <= FALCON_REV_A1) +#define EFX_WORKAROUND_10G(efx) EFX_IS10G(efx) #define EFX_WORKAROUND_SFX7101(efx) ((efx)->phy_type == PHY_TYPE_SFX7101) #define EFX_WORKAROUND_SFT9001A(efx) ((efx)->phy_type == PHY_TYPE_SFT9001A) @@ -25,7 +26,7 @@ /* RX PCIe double split performance issue */ #define EFX_WORKAROUND_7575 EFX_WORKAROUND_ALWAYS /* Bit-bashed I2C reads cause performance drop */ -#define EFX_WORKAROUND_7884 EFX_WORKAROUND_ALWAYS +#define EFX_WORKAROUND_7884 EFX_WORKAROUND_10G /* TX pkt parser problem with <= 16 byte TXes */ #define EFX_WORKAROUND_9141 EFX_WORKAROUND_ALWAYS /* Low rate CRC errors require XAUI reset */ -- cgit v1.2.2