From 8dec32cc421864702912c4341934fe0c737a9798 Mon Sep 17 00:00:00 2001
From: Sony Chacko <sony.chacko@qlogic.com>
Date: Tue, 17 Aug 2010 00:34:24 +0000
Subject: qlcnic: fix link diag test

o Give sufficient time for all makes of PHY modules
  to establish the link after loopback test.
o Perform online test before offline test.

Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlcnic/qlcnic_hw.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net/qlcnic/qlcnic_hw.c')

diff --git a/drivers/net/qlcnic/qlcnic_hw.c b/drivers/net/qlcnic/qlcnic_hw.c
index e08c8b0556a4..9d40ce05cb17 100644
--- a/drivers/net/qlcnic/qlcnic_hw.c
+++ b/drivers/net/qlcnic/qlcnic_hw.c
@@ -1245,4 +1245,5 @@ void qlcnic_clear_ilb_mode(struct qlcnic_adapter *adapter)
 		mode = VPORT_MISS_MODE_ACCEPT_MULTI;
 
 	qlcnic_nic_set_promisc(adapter, mode);
+	msleep(1000);
 }
-- 
cgit v1.2.2


From 091754a1652fad24664f1357ee7616e66953dd30 Mon Sep 17 00:00:00 2001
From: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Date: Thu, 19 Aug 2010 05:08:32 +0000
Subject: qlcnic: rom lock recovery

Fw can get stuck while holding pci semaphore. Driver will not
be able to perform fw initialization, without this lock.
Release semaphore forcefully in that case.

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlcnic/qlcnic_hw.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net/qlcnic/qlcnic_hw.c')

diff --git a/drivers/net/qlcnic/qlcnic_hw.c b/drivers/net/qlcnic/qlcnic_hw.c
index 9d40ce05cb17..5e6f4864df94 100644
--- a/drivers/net/qlcnic/qlcnic_hw.c
+++ b/drivers/net/qlcnic/qlcnic_hw.c
@@ -297,8 +297,8 @@ qlcnic_pcie_sem_lock(struct qlcnic_adapter *adapter, int sem, u32 id_reg)
 			break;
 		if (++timeout >= QLCNIC_PCIE_SEM_TIMEOUT) {
 			dev_err(&adapter->pdev->dev,
-				"Failed to acquire sem=%d lock;reg_id=%d\n",
-				sem, id_reg);
+				"Failed to acquire sem=%d lock; holdby=%d\n",
+				sem, id_reg ? QLCRD32(adapter, id_reg) : -1);
 			return -EIO;
 		}
 		msleep(1);
-- 
cgit v1.2.2


From da48e6c362d24d324f36a780d8566109e5f5a1d7 Mon Sep 17 00:00:00 2001
From: Rajesh Borundia <rajesh.borundia@qlogic.com>
Date: Tue, 31 Aug 2010 17:17:46 +0000
Subject: qlcnic: fix mac addr read

o Mac addr was read from flash for every fw reset
for Non-priviledge function.It should be read only once.
o Remove unnecessary get_mac_addr callback

Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlcnic/qlcnic_hw.c | 13 -------------
 1 file changed, 13 deletions(-)

(limited to 'drivers/net/qlcnic/qlcnic_hw.c')

diff --git a/drivers/net/qlcnic/qlcnic_hw.c b/drivers/net/qlcnic/qlcnic_hw.c
index 5e6f4864df94..670a54a84ba6 100644
--- a/drivers/net/qlcnic/qlcnic_hw.c
+++ b/drivers/net/qlcnic/qlcnic_hw.c
@@ -715,19 +715,6 @@ int qlcnic_change_mtu(struct net_device *netdev, int mtu)
 	return rc;
 }
 
-int qlcnic_get_mac_addr(struct qlcnic_adapter *adapter, u8 *mac)
-{
-	u32 crbaddr;
-	int pci_func = adapter->ahw.pci_func;
-
-	crbaddr = CRB_MAC_BLOCK_START +
-		(4 * ((pci_func/2) * 3)) + (4 * (pci_func & 1));
-
-	qlcnic_fetch_mac(adapter, crbaddr, crbaddr+4, pci_func & 1, mac);
-
-	return 0;
-}
-
 /*
  * Changes the CRB window to the specified window.
  */
-- 
cgit v1.2.2


From b5e5492c0d49e2fd6f51961d03b8533435e5e7f5 Mon Sep 17 00:00:00 2001
From: Amit Kumar Salecha <amit.salecha@qlogic.com>
Date: Tue, 31 Aug 2010 17:17:51 +0000
Subject: qlcnic: support mac learning

Device eswitch need to configure with VM's mac address.
Hypervisor doesn't provide any utility/callbacks to get VM's mac address.
Unicast mac address filter improves performance and also provide
packet loopback capability i.e communication between VM.

Above features is by default off, can be turned on with module parameter
'mac_learn'.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlcnic/qlcnic_hw.c | 48 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 48 insertions(+)

(limited to 'drivers/net/qlcnic/qlcnic_hw.c')

diff --git a/drivers/net/qlcnic/qlcnic_hw.c b/drivers/net/qlcnic/qlcnic_hw.c
index 670a54a84ba6..5b2bce59498d 100644
--- a/drivers/net/qlcnic/qlcnic_hw.c
+++ b/drivers/net/qlcnic/qlcnic_hw.c
@@ -491,6 +491,54 @@ void qlcnic_free_mac_list(struct qlcnic_adapter *adapter)
 	}
 }
 
+void qlcnic_prune_lb_filters(struct qlcnic_adapter *adapter)
+{
+	struct qlcnic_filter *tmp_fil;
+	struct hlist_node *tmp_hnode, *n;
+	struct hlist_head *head;
+	int i;
+
+	for (i = 0; i < adapter->fhash.fmax; i++) {
+		head = &(adapter->fhash.fhead[i]);
+
+		hlist_for_each_entry_safe(tmp_fil, tmp_hnode, n, head, fnode)
+		{
+			if (jiffies >
+				(QLCNIC_FILTER_AGE * HZ + tmp_fil->ftime)) {
+				qlcnic_sre_macaddr_change(adapter,
+					tmp_fil->faddr, QLCNIC_MAC_DEL);
+				spin_lock_bh(&adapter->mac_learn_lock);
+				adapter->fhash.fnum--;
+				hlist_del(&tmp_fil->fnode);
+				spin_unlock_bh(&adapter->mac_learn_lock);
+				kfree(tmp_fil);
+			}
+		}
+	}
+}
+
+void qlcnic_delete_lb_filters(struct qlcnic_adapter *adapter)
+{
+	struct qlcnic_filter *tmp_fil;
+	struct hlist_node *tmp_hnode, *n;
+	struct hlist_head *head;
+	int i;
+
+	for (i = 0; i < adapter->fhash.fmax; i++) {
+		head = &(adapter->fhash.fhead[i]);
+
+		hlist_for_each_entry_safe(tmp_fil, tmp_hnode, n, head, fnode) {
+			qlcnic_sre_macaddr_change(adapter,
+					tmp_fil->faddr, QLCNIC_MAC_DEL);
+			spin_lock_bh(&adapter->mac_learn_lock);
+			adapter->fhash.fnum--;
+			hlist_del(&tmp_fil->fnode);
+			spin_unlock_bh(&adapter->mac_learn_lock);
+			kfree(tmp_fil);
+		}
+	}
+}
+
 #define	QLCNIC_CONFIG_INTR_COALESCE	3
 
 /*
-- 
cgit v1.2.2


From 03c5d770c24cd673d105fbf1a9706ae838272091 Mon Sep 17 00:00:00 2001
From: Amit Kumar Salecha <amit.salecha@qlogic.com>
Date: Tue, 31 Aug 2010 17:17:52 +0000
Subject: qlcnic: mac vlan learning support

Hypervisor allows, two VM's interfaces to have same mac address.
These VM's interfaces get differentiate with Vlan tag.
This patch add support to learn and configure mac+vlan filter on device.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlcnic/qlcnic_hw.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

(limited to 'drivers/net/qlcnic/qlcnic_hw.c')

diff --git a/drivers/net/qlcnic/qlcnic_hw.c b/drivers/net/qlcnic/qlcnic_hw.c
index 5b2bce59498d..c198df90ff3c 100644
--- a/drivers/net/qlcnic/qlcnic_hw.c
+++ b/drivers/net/qlcnic/qlcnic_hw.c
@@ -375,7 +375,7 @@ qlcnic_send_cmd_descs(struct qlcnic_adapter *adapter,
 
 static int
 qlcnic_sre_macaddr_change(struct qlcnic_adapter *adapter, u8 *addr,
-				unsigned op)
+				u16 vlan_id, unsigned op)
 {
 	struct qlcnic_nic_req req;
 	struct qlcnic_mac_req *mac_req;
@@ -391,6 +391,8 @@ qlcnic_sre_macaddr_change(struct qlcnic_adapter *adapter, u8 *addr,
 	mac_req->op = op;
 	memcpy(mac_req->mac_addr, addr, 6);
 
+	req.words[1] = cpu_to_le64(vlan_id);
+
 	return qlcnic_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);
 }
 
@@ -415,7 +417,7 @@ static int qlcnic_nic_add_mac(struct qlcnic_adapter *adapter, u8 *addr)
 	memcpy(cur->mac_addr, addr, ETH_ALEN);
 
 	if (qlcnic_sre_macaddr_change(adapter,
-				cur->mac_addr, QLCNIC_MAC_ADD)) {
+				cur->mac_addr, 0, QLCNIC_MAC_ADD)) {
 		kfree(cur);
 		return -EIO;
 	}
@@ -485,7 +487,7 @@ void qlcnic_free_mac_list(struct qlcnic_adapter *adapter)
 	while (!list_empty(head)) {
 		cur = list_entry(head->next, struct qlcnic_mac_list_s, list);
 		qlcnic_sre_macaddr_change(adapter,
-				cur->mac_addr, QLCNIC_MAC_DEL);
+				cur->mac_addr, 0, QLCNIC_MAC_DEL);
 		list_del(&cur->list);
 		kfree(cur);
 	}
@@ -506,7 +508,9 @@ void qlcnic_prune_lb_filters(struct qlcnic_adapter *adapter)
 			if (jiffies >
 				(QLCNIC_FILTER_AGE * HZ + tmp_fil->ftime)) {
 				qlcnic_sre_macaddr_change(adapter,
-					tmp_fil->faddr, QLCNIC_MAC_DEL);
+					tmp_fil->faddr, tmp_fil->vlan_id,
+					tmp_fil->vlan_id ? QLCNIC_MAC_VLAN_DEL :
+					QLCNIC_MAC_DEL);
 				spin_lock_bh(&adapter->mac_learn_lock);
 				adapter->fhash.fnum--;
 				hlist_del(&tmp_fil->fnode);
@@ -528,8 +532,9 @@ void qlcnic_delete_lb_filters(struct qlcnic_adapter *adapter)
 		head = &(adapter->fhash.fhead[i]);
 
 		hlist_for_each_entry_safe(tmp_fil, tmp_hnode, n, head, fnode) {
-			qlcnic_sre_macaddr_change(adapter,
-					tmp_fil->faddr, QLCNIC_MAC_DEL);
+			qlcnic_sre_macaddr_change(adapter, tmp_fil->faddr,
+				tmp_fil->vlan_id, tmp_fil->vlan_id ?
+				QLCNIC_MAC_VLAN_DEL :  QLCNIC_MAC_DEL);
 			spin_lock_bh(&adapter->mac_learn_lock);
 			adapter->fhash.fnum--;
 			hlist_del(&tmp_fil->fnode);
-- 
cgit v1.2.2


From b501595cbb8afeaa9aaa870b3d29ef051403511a Mon Sep 17 00:00:00 2001
From: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Date: Mon, 4 Oct 2010 04:20:12 +0000
Subject: qlcnic: fix endianess for lro

ipaddress in ifa->ifa_address field are in big endian format.
Also device requires ip address in big endian only.

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlcnic/qlcnic_hw.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'drivers/net/qlcnic/qlcnic_hw.c')

diff --git a/drivers/net/qlcnic/qlcnic_hw.c b/drivers/net/qlcnic/qlcnic_hw.c
index c198df90ff3c..68d56939a8d9 100644
--- a/drivers/net/qlcnic/qlcnic_hw.c
+++ b/drivers/net/qlcnic/qlcnic_hw.c
@@ -676,9 +676,10 @@ int qlcnic_config_rss(struct qlcnic_adapter *adapter, int enable)
 	return rv;
 }
 
-int qlcnic_config_ipaddr(struct qlcnic_adapter *adapter, u32 ip, int cmd)
+int qlcnic_config_ipaddr(struct qlcnic_adapter *adapter, __be32 ip, int cmd)
 {
 	struct qlcnic_nic_req req;
+	struct qlcnic_ipaddr *ipa;
 	u64 word;
 	int rv;
 
@@ -689,7 +690,8 @@ int qlcnic_config_ipaddr(struct qlcnic_adapter *adapter, u32 ip, int cmd)
 	req.req_hdr = cpu_to_le64(word);
 
 	req.words[0] = cpu_to_le64(cmd);
-	req.words[1] = cpu_to_le64(ip);
+	ipa = (struct qlcnic_ipaddr *)&req.words[1];
+	ipa->ipv4 = ip;
 
 	rv = qlcnic_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);
 	if (rv != 0)
-- 
cgit v1.2.2


From 7e56cac4b68805470849ba373dd313ba0e7cdb81 Mon Sep 17 00:00:00 2001
From: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Date: Mon, 4 Oct 2010 04:20:13 +0000
Subject: qlcnic: fix vlan TSO on big endian machine

o desc->vlan_tci is in __le16 format. Doing htons and
  cpu_to_le64 again on vlan_tci, result in invalid value on ppc.

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlcnic/qlcnic_hw.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'drivers/net/qlcnic/qlcnic_hw.c')

diff --git a/drivers/net/qlcnic/qlcnic_hw.c b/drivers/net/qlcnic/qlcnic_hw.c
index 68d56939a8d9..712cfabc2825 100644
--- a/drivers/net/qlcnic/qlcnic_hw.c
+++ b/drivers/net/qlcnic/qlcnic_hw.c
@@ -375,10 +375,11 @@ qlcnic_send_cmd_descs(struct qlcnic_adapter *adapter,
 
 static int
 qlcnic_sre_macaddr_change(struct qlcnic_adapter *adapter, u8 *addr,
-				u16 vlan_id, unsigned op)
+				__le16 vlan_id, unsigned op)
 {
 	struct qlcnic_nic_req req;
 	struct qlcnic_mac_req *mac_req;
+	struct qlcnic_vlan_req *vlan_req;
 	u64 word;
 
 	memset(&req, 0, sizeof(struct qlcnic_nic_req));
@@ -391,7 +392,8 @@ qlcnic_sre_macaddr_change(struct qlcnic_adapter *adapter, u8 *addr,
 	mac_req->op = op;
 	memcpy(mac_req->mac_addr, addr, 6);
 
-	req.words[1] = cpu_to_le64(vlan_id);
+	vlan_req = (struct qlcnic_vlan_req *)&req.words[1];
+	vlan_req->vlan_id = vlan_id;
 
 	return qlcnic_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);
 }
-- 
cgit v1.2.2


From 0bd9e6a964d86a19f54a9ba31168a37d64e451d1 Mon Sep 17 00:00:00 2001
From: Sritej Velaga <sritej.velaga@qlogic.com>
Date: Mon, 4 Oct 2010 04:20:16 +0000
Subject: qlcnic: set mtu lower limit

Setting mtu < 68 is not supported.

Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlcnic/qlcnic_hw.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/net/qlcnic/qlcnic_hw.c')

diff --git a/drivers/net/qlcnic/qlcnic_hw.c b/drivers/net/qlcnic/qlcnic_hw.c
index 712cfabc2825..9d3e16dbd043 100644
--- a/drivers/net/qlcnic/qlcnic_hw.c
+++ b/drivers/net/qlcnic/qlcnic_hw.c
@@ -758,9 +758,9 @@ int qlcnic_change_mtu(struct net_device *netdev, int mtu)
 	struct qlcnic_adapter *adapter = netdev_priv(netdev);
 	int rc = 0;
 
-	if (mtu > P3_MAX_MTU) {
-		dev_err(&adapter->netdev->dev, "mtu > %d bytes unsupported\n",
-						P3_MAX_MTU);
+	if (mtu < P3_MIN_MTU || mtu > P3_MAX_MTU) {
+		dev_err(&adapter->netdev->dev, "%d bytes < mtu < %d bytes"
+			" not supported\n", P3_MAX_MTU, P3_MIN_MTU);
 		return -EINVAL;
 	}
 
-- 
cgit v1.2.2


From a2152d096e0cd8593e883f72e875195ea0e89bb7 Mon Sep 17 00:00:00 2001
From: Amit Kumar Salecha <amit.salecha@qlogic.com>
Date: Thu, 7 Oct 2010 23:46:07 +0000
Subject: qlcnic: remove private LRO flag

LRO was not getting enable after interface down/up.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlcnic/qlcnic_hw.c | 5 -----
 1 file changed, 5 deletions(-)

(limited to 'drivers/net/qlcnic/qlcnic_hw.c')

diff --git a/drivers/net/qlcnic/qlcnic_hw.c b/drivers/net/qlcnic/qlcnic_hw.c
index 9d3e16dbd043..7f1f9b4ca0ff 100644
--- a/drivers/net/qlcnic/qlcnic_hw.c
+++ b/drivers/net/qlcnic/qlcnic_hw.c
@@ -582,9 +582,6 @@ int qlcnic_config_hw_lro(struct qlcnic_adapter *adapter, int enable)
 	u64 word;
 	int rv;
 
-	if ((adapter->flags & QLCNIC_LRO_ENABLED) == enable)
-		return 0;
-
 	memset(&req, 0, sizeof(struct qlcnic_nic_req));
 
 	req.qhdr = cpu_to_le64(QLCNIC_HOST_REQUEST << 23);
@@ -599,8 +596,6 @@ int qlcnic_config_hw_lro(struct qlcnic_adapter *adapter, int enable)
 		dev_err(&adapter->netdev->dev,
 			"Could not send configure hw lro request\n");
 
-	adapter->flags ^= QLCNIC_LRO_ENABLED;
-
 	return rv;
 }
 
-- 
cgit v1.2.2


From ee07c1a70117fe93cf71686d481791c2498f80d2 Mon Sep 17 00:00:00 2001
From: Rajesh Borundia <rajesh.borundia@qlogic.com>
Date: Thu, 7 Oct 2010 23:46:09 +0000
Subject: qlcnic: fix promiscous mode for VF

o Allow promiscous mode setting for VF's depending upon the configuration.

Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlcnic/qlcnic_hw.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/net/qlcnic/qlcnic_hw.c')

diff --git a/drivers/net/qlcnic/qlcnic_hw.c b/drivers/net/qlcnic/qlcnic_hw.c
index 7f1f9b4ca0ff..53e805316f4a 100644
--- a/drivers/net/qlcnic/qlcnic_hw.c
+++ b/drivers/net/qlcnic/qlcnic_hw.c
@@ -442,7 +442,8 @@ void qlcnic_set_multi(struct net_device *netdev)
 	qlcnic_nic_add_mac(adapter, bcast_addr);
 
 	if (netdev->flags & IFF_PROMISC) {
-		mode = VPORT_MISS_MODE_ACCEPT_ALL;
+		if (!(adapter->flags & QLCNIC_PROMISC_DISABLED))
+			mode = VPORT_MISS_MODE_ACCEPT_ALL;
 		goto send_fw_cmd;
 	}
 
-- 
cgit v1.2.2


From ff1b1bf867ebb7eb5e3ff0eab21c26b830d5e890 Mon Sep 17 00:00:00 2001
From: Sritej Velaga <sritej.velaga@qlogic.com>
Date: Thu, 7 Oct 2010 23:46:10 +0000
Subject: qlcnic: change all P3 references to P3P

This patch just rename all P3 #define to P3P.

Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlcnic/qlcnic_hw.c | 36 ++++++++++++++++++------------------
 1 file changed, 18 insertions(+), 18 deletions(-)

(limited to 'drivers/net/qlcnic/qlcnic_hw.c')

diff --git a/drivers/net/qlcnic/qlcnic_hw.c b/drivers/net/qlcnic/qlcnic_hw.c
index 53e805316f4a..7a47a2a7ee27 100644
--- a/drivers/net/qlcnic/qlcnic_hw.c
+++ b/drivers/net/qlcnic/qlcnic_hw.c
@@ -754,9 +754,9 @@ int qlcnic_change_mtu(struct net_device *netdev, int mtu)
 	struct qlcnic_adapter *adapter = netdev_priv(netdev);
 	int rc = 0;
 
-	if (mtu < P3_MIN_MTU || mtu > P3_MAX_MTU) {
+	if (mtu < P3P_MIN_MTU || mtu > P3P_MAX_MTU) {
 		dev_err(&adapter->netdev->dev, "%d bytes < mtu < %d bytes"
-			" not supported\n", P3_MAX_MTU, P3_MIN_MTU);
+			" not supported\n", P3P_MAX_MTU, P3P_MIN_MTU);
 		return -EINVAL;
 	}
 
@@ -1161,31 +1161,31 @@ int qlcnic_get_board_info(struct qlcnic_adapter *adapter)
 
 	adapter->ahw.board_type = board_type;
 
-	if (board_type == QLCNIC_BRDTYPE_P3_4_GB_MM) {
+	if (board_type == QLCNIC_BRDTYPE_P3P_4_GB_MM) {
 		u32 gpio = QLCRD32(adapter, QLCNIC_ROMUSB_GLB_PAD_GPIO_I);
 		if ((gpio & 0x8000) == 0)
-			board_type = QLCNIC_BRDTYPE_P3_10G_TP;
+			board_type = QLCNIC_BRDTYPE_P3P_10G_TP;
 	}
 
 	switch (board_type) {
-	case QLCNIC_BRDTYPE_P3_HMEZ:
-	case QLCNIC_BRDTYPE_P3_XG_LOM:
-	case QLCNIC_BRDTYPE_P3_10G_CX4:
-	case QLCNIC_BRDTYPE_P3_10G_CX4_LP:
-	case QLCNIC_BRDTYPE_P3_IMEZ:
-	case QLCNIC_BRDTYPE_P3_10G_SFP_PLUS:
-	case QLCNIC_BRDTYPE_P3_10G_SFP_CT:
-	case QLCNIC_BRDTYPE_P3_10G_SFP_QT:
-	case QLCNIC_BRDTYPE_P3_10G_XFP:
-	case QLCNIC_BRDTYPE_P3_10000_BASE_T:
+	case QLCNIC_BRDTYPE_P3P_HMEZ:
+	case QLCNIC_BRDTYPE_P3P_XG_LOM:
+	case QLCNIC_BRDTYPE_P3P_10G_CX4:
+	case QLCNIC_BRDTYPE_P3P_10G_CX4_LP:
+	case QLCNIC_BRDTYPE_P3P_IMEZ:
+	case QLCNIC_BRDTYPE_P3P_10G_SFP_PLUS:
+	case QLCNIC_BRDTYPE_P3P_10G_SFP_CT:
+	case QLCNIC_BRDTYPE_P3P_10G_SFP_QT:
+	case QLCNIC_BRDTYPE_P3P_10G_XFP:
+	case QLCNIC_BRDTYPE_P3P_10000_BASE_T:
 		adapter->ahw.port_type = QLCNIC_XGBE;
 		break;
-	case QLCNIC_BRDTYPE_P3_REF_QG:
-	case QLCNIC_BRDTYPE_P3_4_GB:
-	case QLCNIC_BRDTYPE_P3_4_GB_MM:
+	case QLCNIC_BRDTYPE_P3P_REF_QG:
+	case QLCNIC_BRDTYPE_P3P_4_GB:
+	case QLCNIC_BRDTYPE_P3P_4_GB_MM:
 		adapter->ahw.port_type = QLCNIC_GBE;
 		break;
-	case QLCNIC_BRDTYPE_P3_10G_TP:
+	case QLCNIC_BRDTYPE_P3P_10G_TP:
 		adapter->ahw.port_type = (adapter->portnum < 2) ?
 			QLCNIC_XGBE : QLCNIC_GBE;
 		break;
-- 
cgit v1.2.2


From 97319a270da37a5eab14a770f1417d8229245270 Mon Sep 17 00:00:00 2001
From: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Date: Thu, 2 Dec 2010 20:41:23 +0000
Subject: qlcnic: Disable loopback support

Loopback mode can not be supported in CNA mode. Removing it until FW is fixed.

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlcnic/qlcnic_hw.c | 53 ------------------------------------------
 1 file changed, 53 deletions(-)

(limited to 'drivers/net/qlcnic/qlcnic_hw.c')

diff --git a/drivers/net/qlcnic/qlcnic_hw.c b/drivers/net/qlcnic/qlcnic_hw.c
index 7a47a2a7ee27..8630118dc4bb 100644
--- a/drivers/net/qlcnic/qlcnic_hw.c
+++ b/drivers/net/qlcnic/qlcnic_hw.c
@@ -1234,56 +1234,3 @@ int qlcnic_config_led(struct qlcnic_adapter *adapter, u32 state, u32 rate)
 
 	return rv;
 }
-
-static int qlcnic_set_fw_loopback(struct qlcnic_adapter *adapter, u32 flag)
-{
-	struct qlcnic_nic_req	req;
-	int			rv;
-	u64			word;
-
-	memset(&req, 0, sizeof(struct qlcnic_nic_req));
-	req.qhdr = cpu_to_le64(QLCNIC_HOST_REQUEST << 23);
-
-	word = QLCNIC_H2C_OPCODE_CONFIG_LOOPBACK |
-			((u64)adapter->portnum << 16);
-	req.req_hdr = cpu_to_le64(word);
-	req.words[0] = cpu_to_le64(flag);
-
-	rv = qlcnic_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);
-	if (rv)
-		dev_err(&adapter->pdev->dev,
-			"%sting loopback mode failed.\n",
-					flag ? "Set" : "Reset");
-	return rv;
-}
-
-int qlcnic_set_ilb_mode(struct qlcnic_adapter *adapter)
-{
-	if (qlcnic_set_fw_loopback(adapter, 1))
-		return -EIO;
-
-	if (qlcnic_nic_set_promisc(adapter,
-				VPORT_MISS_MODE_ACCEPT_ALL)) {
-		qlcnic_set_fw_loopback(adapter, 0);
-		return -EIO;
-	}
-
-	msleep(1000);
-	return 0;
-}
-
-void qlcnic_clear_ilb_mode(struct qlcnic_adapter *adapter)
-{
-	int mode = VPORT_MISS_MODE_DROP;
-	struct net_device *netdev = adapter->netdev;
-
-	qlcnic_set_fw_loopback(adapter, 0);
-
-	if (netdev->flags & IFF_PROMISC)
-		mode = VPORT_MISS_MODE_ACCEPT_ALL;
-	else if (netdev->flags & IFF_ALLMULTI)
-		mode = VPORT_MISS_MODE_ACCEPT_MULTI;
-
-	qlcnic_nic_set_promisc(adapter, mode);
-	msleep(1000);
-}
-- 
cgit v1.2.2


From 40839129f77903cbbb7f232e2e2ab08dfe4a4f8d Mon Sep 17 00:00:00 2001
From: Sritej Velaga <sritej.velaga@qlogic.com>
Date: Thu, 2 Dec 2010 20:41:56 +0000
Subject: qlcnic: LICENSE file for qlcnic

Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com>
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlcnic/qlcnic_hw.c | 23 +++--------------------
 1 file changed, 3 insertions(+), 20 deletions(-)

(limited to 'drivers/net/qlcnic/qlcnic_hw.c')

diff --git a/drivers/net/qlcnic/qlcnic_hw.c b/drivers/net/qlcnic/qlcnic_hw.c
index 8630118dc4bb..c9c4bf1458a8 100644
--- a/drivers/net/qlcnic/qlcnic_hw.c
+++ b/drivers/net/qlcnic/qlcnic_hw.c
@@ -1,25 +1,8 @@
 /*
- * Copyright (C) 2009 - QLogic Corporation.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston,
- * MA  02111-1307, USA.
- *
- * The full GNU General Public License is included in this distribution
- * in the file called "COPYING".
+ * QLogic qlcnic NIC Driver
+ * Copyright (c)  2009-2010 QLogic Corporation
  *
+ * See LICENSE.qlcnic for copyright and licensing details.
  */
 
 #include "qlcnic.h"
-- 
cgit v1.2.2


From 215faf9c5f6e319e97edea9e178123e07825c14d Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Tue, 21 Dec 2010 02:16:10 -0800
Subject: drivers/net/*/: Use static const

Using static const generally increases object text and decreases data size.
It also generally decreases overall object size.

Signed-off-by: Joe Perches <joe@perches.com>
---
 drivers/net/qlcnic/qlcnic_hw.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

(limited to 'drivers/net/qlcnic/qlcnic_hw.c')

diff --git a/drivers/net/qlcnic/qlcnic_hw.c b/drivers/net/qlcnic/qlcnic_hw.c
index c9c4bf1458a8..616940f0a8d0 100644
--- a/drivers/net/qlcnic/qlcnic_hw.c
+++ b/drivers/net/qlcnic/qlcnic_hw.c
@@ -381,7 +381,7 @@ qlcnic_sre_macaddr_change(struct qlcnic_adapter *adapter, u8 *addr,
 	return qlcnic_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);
 }
 
-static int qlcnic_nic_add_mac(struct qlcnic_adapter *adapter, u8 *addr)
+static int qlcnic_nic_add_mac(struct qlcnic_adapter *adapter, const u8 *addr)
 {
 	struct list_head *head;
 	struct qlcnic_mac_list_s *cur;
@@ -415,7 +415,9 @@ void qlcnic_set_multi(struct net_device *netdev)
 {
 	struct qlcnic_adapter *adapter = netdev_priv(netdev);
 	struct netdev_hw_addr *ha;
-	u8 bcast_addr[ETH_ALEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
+	static const u8 bcast_addr[ETH_ALEN] = {
+		0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+	};
 	u32 mode = VPORT_MISS_MODE_DROP;
 
 	if (!test_bit(__QLCNIC_FW_ATTACHED, &adapter->state))
@@ -621,10 +623,11 @@ int qlcnic_config_rss(struct qlcnic_adapter *adapter, int enable)
 	u64 word;
 	int i, rv;
 
-	const u64 key[] = { 0xbeac01fa6a42b73bULL, 0x8030f20c77cb2da3ULL,
-			0xae7b30b4d0ca2bcbULL, 0x43a38fb04167253dULL,
-			0x255b0ec26d5a56daULL };
-
+	static const u64 key[] = {
+		0xbeac01fa6a42b73bULL, 0x8030f20c77cb2da3ULL,
+		0xae7b30b4d0ca2bcbULL, 0x43a38fb04167253dULL,
+		0x255b0ec26d5a56daULL
+	};
 
 	memset(&req, 0, sizeof(struct qlcnic_nic_req));
 	req.qhdr = cpu_to_le64(QLCNIC_HOST_REQUEST << 23);
-- 
cgit v1.2.2


From b1fc6d3cfaff6fefd838b84532cb356f8a80da7b Mon Sep 17 00:00:00 2001
From: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Date: Fri, 1 Apr 2011 14:28:05 +0000
Subject: qlcnic: Cleanup patch

 1. Changed adapter structure to move away from embedding hardware and
    receive context structs and use pointers to those objects
 2. Packed all the structs that interface with FW
 3. Removed unused code and structs

Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlcnic/qlcnic_hw.c | 56 +++++++++++++++++++++---------------------
 1 file changed, 28 insertions(+), 28 deletions(-)

(limited to 'drivers/net/qlcnic/qlcnic_hw.c')

diff --git a/drivers/net/qlcnic/qlcnic_hw.c b/drivers/net/qlcnic/qlcnic_hw.c
index 616940f0a8d0..7e3f52690e3f 100644
--- a/drivers/net/qlcnic/qlcnic_hw.c
+++ b/drivers/net/qlcnic/qlcnic_hw.c
@@ -457,7 +457,7 @@ int qlcnic_nic_set_promisc(struct qlcnic_adapter *adapter, u32 mode)
 
 	req.qhdr = cpu_to_le64(QLCNIC_HOST_REQUEST << 23);
 
-	word = QLCNIC_H2C_OPCODE_PROXY_SET_VPORT_MISS_MODE |
+	word = QLCNIC_H2C_OPCODE_SET_MAC_RECEIVE_MODE |
 			((u64)adapter->portnum << 16);
 	req.req_hdr = cpu_to_le64(word);
 
@@ -780,7 +780,7 @@ qlcnic_pci_get_crb_addr_2M(struct qlcnic_adapter *adapter,
 	m = &crb_128M_2M_map[CRB_BLK(off)].sub_block[CRB_SUBBLK(off)];
 
 	if (m->valid && (m->start_128M <= off) && (m->end_128M > off)) {
-		*addr = adapter->ahw.pci_base0 + m->start_2M +
+		*addr = adapter->ahw->pci_base0 + m->start_2M +
 			(off - m->start_128M);
 		return 0;
 	}
@@ -788,7 +788,7 @@ qlcnic_pci_get_crb_addr_2M(struct qlcnic_adapter *adapter,
 	/*
 	 * Not in direct map, use crb window
 	 */
-	*addr = adapter->ahw.pci_base0 + CRB_INDIRECT_2M + (off & MASK(16));
+	*addr = adapter->ahw->pci_base0 + CRB_INDIRECT_2M + (off & MASK(16));
 	return 1;
 }
 
@@ -801,7 +801,7 @@ static int
 qlcnic_pci_set_crbwindow_2M(struct qlcnic_adapter *adapter, ulong off)
 {
 	u32 window;
-	void __iomem *addr = adapter->ahw.pci_base0 + CRB_WINDOW_2M;
+	void __iomem *addr = adapter->ahw->pci_base0 + CRB_WINDOW_2M;
 
 	off -= QLCNIC_PCI_CRBSPACE;
 
@@ -838,13 +838,13 @@ qlcnic_hw_write_wx_2M(struct qlcnic_adapter *adapter, ulong off, u32 data)
 
 	if (rv > 0) {
 		/* indirect access */
-		write_lock_irqsave(&adapter->ahw.crb_lock, flags);
+		write_lock_irqsave(&adapter->ahw->crb_lock, flags);
 		crb_win_lock(adapter);
 		rv = qlcnic_pci_set_crbwindow_2M(adapter, off);
 		if (!rv)
 			writel(data, addr);
 		crb_win_unlock(adapter);
-		write_unlock_irqrestore(&adapter->ahw.crb_lock, flags);
+		write_unlock_irqrestore(&adapter->ahw->crb_lock, flags);
 		return rv;
 	}
 
@@ -869,12 +869,12 @@ qlcnic_hw_read_wx_2M(struct qlcnic_adapter *adapter, ulong off)
 
 	if (rv > 0) {
 		/* indirect access */
-		write_lock_irqsave(&adapter->ahw.crb_lock, flags);
+		write_lock_irqsave(&adapter->ahw->crb_lock, flags);
 		crb_win_lock(adapter);
 		if (!qlcnic_pci_set_crbwindow_2M(adapter, off))
 			data = readl(addr);
 		crb_win_unlock(adapter);
-		write_unlock_irqrestore(&adapter->ahw.crb_lock, flags);
+		write_unlock_irqrestore(&adapter->ahw->crb_lock, flags);
 		return data;
 	}
 
@@ -904,9 +904,9 @@ qlcnic_pci_set_window_2M(struct qlcnic_adapter *adapter,
 
 	window = OCM_WIN_P3P(addr);
 
-	writel(window, adapter->ahw.ocm_win_crb);
+	writel(window, adapter->ahw->ocm_win_crb);
 	/* read back to flush */
-	readl(adapter->ahw.ocm_win_crb);
+	readl(adapter->ahw->ocm_win_crb);
 
 	*start = QLCNIC_PCI_OCM0_2M + GET_MEM_OFFS_2M(addr);
 	return 0;
@@ -920,13 +920,13 @@ qlcnic_pci_mem_access_direct(struct qlcnic_adapter *adapter, u64 off,
 	int ret;
 	u32 start;
 
-	mutex_lock(&adapter->ahw.mem_lock);
+	mutex_lock(&adapter->ahw->mem_lock);
 
 	ret = qlcnic_pci_set_window_2M(adapter, off, &start);
 	if (ret != 0)
 		goto unlock;
 
-	addr = adapter->ahw.pci_base0 + start;
+	addr = adapter->ahw->pci_base0 + start;
 
 	if (op == 0)	/* read */
 		*data = readq(addr);
@@ -934,7 +934,7 @@ qlcnic_pci_mem_access_direct(struct qlcnic_adapter *adapter, u64 off,
 		writeq(*data, addr);
 
 unlock:
-	mutex_unlock(&adapter->ahw.mem_lock);
+	mutex_unlock(&adapter->ahw->mem_lock);
 
 	return ret;
 }
@@ -942,23 +942,23 @@ unlock:
 void
 qlcnic_pci_camqm_read_2M(struct qlcnic_adapter *adapter, u64 off, u64 *data)
 {
-	void __iomem *addr = adapter->ahw.pci_base0 +
+	void __iomem *addr = adapter->ahw->pci_base0 +
 		QLCNIC_PCI_CAMQM_2M_BASE + (off - QLCNIC_PCI_CAMQM);
 
-	mutex_lock(&adapter->ahw.mem_lock);
+	mutex_lock(&adapter->ahw->mem_lock);
 	*data = readq(addr);
-	mutex_unlock(&adapter->ahw.mem_lock);
+	mutex_unlock(&adapter->ahw->mem_lock);
 }
 
 void
 qlcnic_pci_camqm_write_2M(struct qlcnic_adapter *adapter, u64 off, u64 data)
 {
-	void __iomem *addr = adapter->ahw.pci_base0 +
+	void __iomem *addr = adapter->ahw->pci_base0 +
 		QLCNIC_PCI_CAMQM_2M_BASE + (off - QLCNIC_PCI_CAMQM);
 
-	mutex_lock(&adapter->ahw.mem_lock);
+	mutex_lock(&adapter->ahw->mem_lock);
 	writeq(data, addr);
-	mutex_unlock(&adapter->ahw.mem_lock);
+	mutex_unlock(&adapter->ahw->mem_lock);
 }
 
 #define MAX_CTL_CHECK   1000
@@ -997,7 +997,7 @@ qlcnic_pci_mem_write_2M(struct qlcnic_adapter *adapter,
 correct:
 	off8 = off & ~0xf;
 
-	mutex_lock(&adapter->ahw.mem_lock);
+	mutex_lock(&adapter->ahw->mem_lock);
 
 	writel(off8, (mem_crb + MIU_TEST_AGT_ADDR_LO));
 	writel(0, (mem_crb + MIU_TEST_AGT_ADDR_HI));
@@ -1049,7 +1049,7 @@ correct:
 		ret = 0;
 
 done:
-	mutex_unlock(&adapter->ahw.mem_lock);
+	mutex_unlock(&adapter->ahw->mem_lock);
 
 	return ret;
 }
@@ -1091,7 +1091,7 @@ qlcnic_pci_mem_read_2M(struct qlcnic_adapter *adapter,
 correct:
 	off8 = off & ~0xf;
 
-	mutex_lock(&adapter->ahw.mem_lock);
+	mutex_lock(&adapter->ahw->mem_lock);
 
 	writel(off8, (mem_crb + MIU_TEST_AGT_ADDR_LO));
 	writel(0, (mem_crb + MIU_TEST_AGT_ADDR_HI));
@@ -1121,7 +1121,7 @@ correct:
 		ret = 0;
 	}
 
-	mutex_unlock(&adapter->ahw.mem_lock);
+	mutex_unlock(&adapter->ahw->mem_lock);
 
 	return ret;
 }
@@ -1145,7 +1145,7 @@ int qlcnic_get_board_info(struct qlcnic_adapter *adapter)
 	if (qlcnic_rom_fast_read(adapter, offset, &board_type))
 		return -EIO;
 
-	adapter->ahw.board_type = board_type;
+	adapter->ahw->board_type = board_type;
 
 	if (board_type == QLCNIC_BRDTYPE_P3P_4_GB_MM) {
 		u32 gpio = QLCRD32(adapter, QLCNIC_ROMUSB_GLB_PAD_GPIO_I);
@@ -1164,20 +1164,20 @@ int qlcnic_get_board_info(struct qlcnic_adapter *adapter)
 	case QLCNIC_BRDTYPE_P3P_10G_SFP_QT:
 	case QLCNIC_BRDTYPE_P3P_10G_XFP:
 	case QLCNIC_BRDTYPE_P3P_10000_BASE_T:
-		adapter->ahw.port_type = QLCNIC_XGBE;
+		adapter->ahw->port_type = QLCNIC_XGBE;
 		break;
 	case QLCNIC_BRDTYPE_P3P_REF_QG:
 	case QLCNIC_BRDTYPE_P3P_4_GB:
 	case QLCNIC_BRDTYPE_P3P_4_GB_MM:
-		adapter->ahw.port_type = QLCNIC_GBE;
+		adapter->ahw->port_type = QLCNIC_GBE;
 		break;
 	case QLCNIC_BRDTYPE_P3P_10G_TP:
-		adapter->ahw.port_type = (adapter->portnum < 2) ?
+		adapter->ahw->port_type = (adapter->portnum < 2) ?
 			QLCNIC_XGBE : QLCNIC_GBE;
 		break;
 	default:
 		dev_err(&pdev->dev, "unknown board type %x\n", board_type);
-		adapter->ahw.port_type = QLCNIC_XGBE;
+		adapter->ahw->port_type = QLCNIC_XGBE;
 		break;
 	}
 
-- 
cgit v1.2.2


From 8816d0099b9c0f48452b69471c2f54037f7e0e3b Mon Sep 17 00:00:00 2001
From: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Date: Fri, 1 Apr 2011 14:28:21 +0000
Subject: qlcnic: Remove unused code

Cleaned up unused codes for interrupt coalescence settings

Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlcnic/qlcnic_hw.c | 20 +++++++++-----------
 1 file changed, 9 insertions(+), 11 deletions(-)

(limited to 'drivers/net/qlcnic/qlcnic_hw.c')

diff --git a/drivers/net/qlcnic/qlcnic_hw.c b/drivers/net/qlcnic/qlcnic_hw.c
index 7e3f52690e3f..3901be85dcac 100644
--- a/drivers/net/qlcnic/qlcnic_hw.c
+++ b/drivers/net/qlcnic/qlcnic_hw.c
@@ -532,33 +532,31 @@ void qlcnic_delete_lb_filters(struct qlcnic_adapter *adapter)
 	}
 }
 
-#define	QLCNIC_CONFIG_INTR_COALESCE	3
-
 /*
  * Send the interrupt coalescing parameter set by ethtool to the card.
  */
 int qlcnic_config_intr_coalesce(struct qlcnic_adapter *adapter)
 {
 	struct qlcnic_nic_req req;
-	u64 word[6];
-	int rv, i;
+	int rv;
 
 	memset(&req, 0, sizeof(struct qlcnic_nic_req));
 
 	req.qhdr = cpu_to_le64(QLCNIC_HOST_REQUEST << 23);
 
-	word[0] = QLCNIC_CONFIG_INTR_COALESCE | ((u64)adapter->portnum << 16);
-	req.req_hdr = cpu_to_le64(word[0]);
-
-	memcpy(&word[0], &adapter->coal, sizeof(adapter->coal));
-	for (i = 0; i < 6; i++)
-		req.words[i] = cpu_to_le64(word[i]);
+	req.req_hdr = cpu_to_le64(QLCNIC_CONFIG_INTR_COALESCE |
+		((u64) adapter->portnum << 16));
 
+	req.words[0] = cpu_to_le64(((u64) adapter->ahw->coal.flag) << 32);
+	req.words[2] = cpu_to_le64(adapter->ahw->coal.rx_packets |
+			((u64) adapter->ahw->coal.rx_time_us) << 16);
+	req.words[5] = cpu_to_le64(adapter->ahw->coal.timer_out |
+			((u64) adapter->ahw->coal.type) << 32 |
+			((u64) adapter->ahw->coal.sts_ring_mask) << 40);
 	rv = qlcnic_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);
 	if (rv != 0)
 		dev_err(&adapter->netdev->dev,
 			"Could not send interrupt coalescing parameters\n");
-
 	return rv;
 }
 
-- 
cgit v1.2.2


From b56421d0b7527f8ecea3de030cf508468fdc9ba1 Mon Sep 17 00:00:00 2001
From: Rajesh Borundia <Rajesh.Borundia@qlogic.com>
Date: Fri, 1 Apr 2011 14:28:31 +0000
Subject: qlcnic: Fix LRO disable

o In dev->open LRO was enabled by default, enable it depending
  upon netdev->features , kernel may have disabled it.
o Configure LRO when interface is up.

Signed-off-by: Rajesh Borundia <Rajesh.Borundia@qlogic.com>
Signed-off-by: Anirban Chakraborty <Anirban.Chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlcnic/qlcnic_hw.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'drivers/net/qlcnic/qlcnic_hw.c')

diff --git a/drivers/net/qlcnic/qlcnic_hw.c b/drivers/net/qlcnic/qlcnic_hw.c
index 3901be85dcac..498cca92126a 100644
--- a/drivers/net/qlcnic/qlcnic_hw.c
+++ b/drivers/net/qlcnic/qlcnic_hw.c
@@ -566,6 +566,9 @@ int qlcnic_config_hw_lro(struct qlcnic_adapter *adapter, int enable)
 	u64 word;
 	int rv;
 
+	if (!test_bit(__QLCNIC_FW_ATTACHED, &adapter->state))
+		return 0;
+
 	memset(&req, 0, sizeof(struct qlcnic_nic_req));
 
 	req.qhdr = cpu_to_le64(QLCNIC_HOST_REQUEST << 23);
@@ -711,6 +714,9 @@ int qlcnic_send_lro_cleanup(struct qlcnic_adapter *adapter)
 	u64 word;
 	int rv;
 
+	if (!test_bit(__QLCNIC_FW_ATTACHED, &adapter->state))
+		return 0;
+
 	memset(&req, 0, sizeof(struct qlcnic_nic_req));
 	req.qhdr = cpu_to_le64(QLCNIC_HOST_REQUEST << 23);
 
-- 
cgit v1.2.2


From 135d84a9f28854f875f32f97485737b0013c99d6 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Micha=C5=82=20Miros=C5=82aw?= <mirq-linux@rere.qmqm.pl>
Date: Tue, 19 Apr 2011 03:03:57 +0000
Subject: net: qlcnic: convert to hw_features
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Bit more than minimal conversion. There might be some issues because
of qlcnic_set_netdev_features() if it's called after netdev init.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlcnic/qlcnic_hw.c | 37 +++++++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

(limited to 'drivers/net/qlcnic/qlcnic_hw.c')

diff --git a/drivers/net/qlcnic/qlcnic_hw.c b/drivers/net/qlcnic/qlcnic_hw.c
index 498cca92126a..cbb27f2df008 100644
--- a/drivers/net/qlcnic/qlcnic_hw.c
+++ b/drivers/net/qlcnic/qlcnic_hw.c
@@ -758,6 +758,43 @@ int qlcnic_change_mtu(struct net_device *netdev, int mtu)
 	return rc;
 }
 
+
+u32 qlcnic_fix_features(struct net_device *netdev, u32 features)
+{
+	struct qlcnic_adapter *adapter = netdev_priv(netdev);
+
+	if ((adapter->flags & QLCNIC_ESWITCH_ENABLED)) {
+		u32 changed = features ^ netdev->features;
+		features ^= changed & (NETIF_F_ALL_CSUM | NETIF_F_RXCSUM);
+	}
+
+	if (!(features & NETIF_F_RXCSUM))
+		features &= ~NETIF_F_LRO;
+
+	return features;
+}
+
+
+int qlcnic_set_features(struct net_device *netdev, u32 features)
+{
+	struct qlcnic_adapter *adapter = netdev_priv(netdev);
+	u32 changed = netdev->features ^ features;
+	int hw_lro = (features & NETIF_F_LRO) ? QLCNIC_LRO_ENABLED : 0;
+
+	if (!(changed & NETIF_F_LRO))
+		return 0;
+
+	netdev->features = features ^ NETIF_F_LRO;
+
+	if (qlcnic_config_hw_lro(adapter, hw_lro))
+		return -EIO;
+
+	if ((hw_lro == 0) && qlcnic_send_lro_cleanup(adapter))
+		return -EIO;
+
+	return 0;
+}
+
 /*
  * Changes the CRB window to the specified window.
  */
-- 
cgit v1.2.2


From 18f2f616be88736f5daf31d9d40e027abbd607ed Mon Sep 17 00:00:00 2001
From: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Date: Thu, 12 May 2011 12:48:33 +0000
Subject: qlcnic: FW dump support

Added code to take FW dump.
o Driver queries FW at the init time and gets the dump template
o It takes FW dump as per the dump template
o Level of FW dump (and its size) is configured via dump flag

Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com>
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlcnic/qlcnic_hw.c | 459 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 459 insertions(+)

(limited to 'drivers/net/qlcnic/qlcnic_hw.c')

diff --git a/drivers/net/qlcnic/qlcnic_hw.c b/drivers/net/qlcnic/qlcnic_hw.c
index cbb27f2df008..e9656616f2a2 100644
--- a/drivers/net/qlcnic/qlcnic_hw.c
+++ b/drivers/net/qlcnic/qlcnic_hw.c
@@ -9,6 +9,7 @@
 
 #include <linux/slab.h>
 #include <net/ip.h>
+#include <linux/bitops.h>
 
 #define MASK(n) ((1ULL<<(n))-1)
 #define OCM_WIN_P3P(addr) (addr & 0xffc0000)
@@ -1261,3 +1262,461 @@ int qlcnic_config_led(struct qlcnic_adapter *adapter, u32 state, u32 rate)
 
 	return rv;
 }
+
+/* FW dump related functions */
+static u32
+qlcnic_dump_crb(struct qlcnic_adapter *adapter, struct qlcnic_dump_entry *entry,
+		u32 *buffer)
+{
+	int i;
+	u32 addr, data;
+	struct __crb *crb = &entry->region.crb;
+	void __iomem *base = adapter->ahw->pci_base0;
+
+	addr = crb->addr;
+
+	for (i = 0; i < crb->no_ops; i++) {
+		QLCNIC_RD_DUMP_REG(addr, base, &data);
+		*buffer++ = cpu_to_le32(addr);
+		*buffer++ = cpu_to_le32(data);
+		addr += crb->stride;
+	}
+	return crb->no_ops * 2 * sizeof(u32);
+}
+
+static u32
+qlcnic_dump_ctrl(struct qlcnic_adapter *adapter,
+	struct qlcnic_dump_entry *entry, u32 *buffer)
+{
+	int i, k, timeout = 0;
+	void __iomem *base = adapter->ahw->pci_base0;
+	u32 addr, data;
+	u8 opcode, no_ops;
+	struct __ctrl *ctr = &entry->region.ctrl;
+	struct qlcnic_dump_template_hdr *t_hdr = adapter->ahw->fw_dump.tmpl_hdr;
+
+	addr = ctr->addr;
+	no_ops = ctr->no_ops;
+
+	for (i = 0; i < no_ops; i++) {
+		k = 0;
+		opcode = 0;
+		for (k = 0; k < 8; k++) {
+			if (!(ctr->opcode & (1 << k)))
+				continue;
+			switch (1 << k) {
+			case QLCNIC_DUMP_WCRB:
+				QLCNIC_WR_DUMP_REG(addr, base, ctr->val1);
+				break;
+			case QLCNIC_DUMP_RWCRB:
+				QLCNIC_RD_DUMP_REG(addr, base, &data);
+				QLCNIC_WR_DUMP_REG(addr, base, data);
+				break;
+			case QLCNIC_DUMP_ANDCRB:
+				QLCNIC_RD_DUMP_REG(addr, base, &data);
+				QLCNIC_WR_DUMP_REG(addr, base,
+					(data & ctr->val2));
+				break;
+			case QLCNIC_DUMP_ORCRB:
+				QLCNIC_RD_DUMP_REG(addr, base, &data);
+				QLCNIC_WR_DUMP_REG(addr, base,
+					(data | ctr->val3));
+				break;
+			case QLCNIC_DUMP_POLLCRB:
+				while (timeout <= ctr->timeout) {
+					QLCNIC_RD_DUMP_REG(addr, base, &data);
+					if ((data & ctr->val2) == ctr->val1)
+						break;
+					msleep(1);
+					timeout++;
+				}
+				if (timeout > ctr->timeout) {
+					dev_info(&adapter->pdev->dev,
+					"Timed out, aborting poll CRB\n");
+					return -EINVAL;
+				}
+				break;
+			case QLCNIC_DUMP_RD_SAVE:
+				if (ctr->index_a)
+					addr = t_hdr->saved_state[ctr->index_a];
+				QLCNIC_RD_DUMP_REG(addr, base, &data);
+				t_hdr->saved_state[ctr->index_v] = data;
+				break;
+			case QLCNIC_DUMP_WRT_SAVED:
+				if (ctr->index_v)
+					data = t_hdr->saved_state[ctr->index_v];
+				else
+					data = ctr->val1;
+				if (ctr->index_a)
+					addr = t_hdr->saved_state[ctr->index_a];
+				QLCNIC_WR_DUMP_REG(addr, base, data);
+				break;
+			case QLCNIC_DUMP_MOD_SAVE_ST:
+				data = t_hdr->saved_state[ctr->index_v];
+				data <<= ctr->shl_val;
+				data >>= ctr->shr_val;
+				if (ctr->val2)
+					data &= ctr->val2;
+				data |= ctr->val3;
+				data += ctr->val1;
+				t_hdr->saved_state[ctr->index_v] = data;
+				break;
+			default:
+				dev_info(&adapter->pdev->dev,
+					"Unknown opcode\n");
+				break;
+			}
+		}
+		addr += ctr->stride;
+	}
+	return 0;
+}
+
+static u32
+qlcnic_dump_mux(struct qlcnic_adapter *adapter, struct qlcnic_dump_entry *entry,
+	u32 *buffer)
+{
+	int loop;
+	u32 val, data = 0;
+	struct __mux *mux = &entry->region.mux;
+	void __iomem *base = adapter->ahw->pci_base0;
+
+	val = mux->val;
+	for (loop = 0; loop < mux->no_ops; loop++) {
+		QLCNIC_WR_DUMP_REG(mux->addr, base, val);
+		QLCNIC_RD_DUMP_REG(mux->read_addr, base, &data);
+		*buffer++ = cpu_to_le32(val);
+		*buffer++ = cpu_to_le32(data);
+		val += mux->val_stride;
+	}
+	return 2 * mux->no_ops * sizeof(u32);
+}
+
+static u32
+qlcnic_dump_que(struct qlcnic_adapter *adapter, struct qlcnic_dump_entry *entry,
+	u32 *buffer)
+{
+	int i, loop;
+	u32 cnt, addr, data, que_id = 0;
+	void __iomem *base = adapter->ahw->pci_base0;
+	struct __queue *que = &entry->region.que;
+
+	addr = que->read_addr;
+	cnt = que->read_addr_cnt;
+
+	for (loop = 0; loop < que->no_ops; loop++) {
+		QLCNIC_WR_DUMP_REG(que->sel_addr, base, que_id);
+		for (i = 0; i < cnt; i++) {
+			QLCNIC_RD_DUMP_REG(addr, base, &data);
+			*buffer++ = cpu_to_le32(data);
+			addr += que->read_addr_stride;
+		}
+		que_id += que->stride;
+	}
+	return que->no_ops * cnt * sizeof(u32);
+}
+
+static u32
+qlcnic_dump_ocm(struct qlcnic_adapter *adapter, struct qlcnic_dump_entry *entry,
+	u32 *buffer)
+{
+	int i;
+	u32 data;
+	void __iomem *addr;
+	struct __ocm *ocm = &entry->region.ocm;
+
+	addr = adapter->ahw->pci_base0 + ocm->read_addr;
+	for (i = 0; i < ocm->no_ops; i++) {
+		data = readl(addr);
+		*buffer++ = cpu_to_le32(data);
+		addr += ocm->read_addr_stride;
+	}
+	return ocm->no_ops * sizeof(u32);
+}
+
+static u32
+qlcnic_read_rom(struct qlcnic_adapter *adapter, struct qlcnic_dump_entry *entry,
+	u32 *buffer)
+{
+	int i, count = 0;
+	u32 fl_addr, size, val, lck_val, addr;
+	struct __mem *rom = &entry->region.mem;
+	void __iomem *base = adapter->ahw->pci_base0;
+
+	fl_addr = rom->addr;
+	size = rom->size/4;
+lock_try:
+	lck_val = readl(base + QLCNIC_FLASH_SEM2_LK);
+	if (!lck_val && count < MAX_CTL_CHECK) {
+		msleep(10);
+		count++;
+		goto lock_try;
+	}
+	writel(adapter->ahw->pci_func, (base + QLCNIC_FLASH_LOCK_ID));
+	for (i = 0; i < size; i++) {
+		addr = fl_addr & 0xFFFF0000;
+		QLCNIC_WR_DUMP_REG(FLASH_ROM_WINDOW, base, addr);
+		addr = LSW(fl_addr) + FLASH_ROM_DATA;
+		QLCNIC_RD_DUMP_REG(addr, base, &val);
+		fl_addr += 4;
+		*buffer++ = cpu_to_le32(val);
+	}
+	readl(base + QLCNIC_FLASH_SEM2_ULK);
+	return rom->size;
+}
+
+static u32
+qlcnic_dump_l1_cache(struct qlcnic_adapter *adapter,
+	struct qlcnic_dump_entry *entry, u32 *buffer)
+{
+	int i;
+	u32 cnt, val, data, addr;
+	void __iomem *base = adapter->ahw->pci_base0;
+	struct __cache *l1 = &entry->region.cache;
+
+	val = l1->init_tag_val;
+
+	for (i = 0; i < l1->no_ops; i++) {
+		QLCNIC_WR_DUMP_REG(l1->addr, base, val);
+		QLCNIC_WR_DUMP_REG(l1->ctrl_addr, base, LSW(l1->ctrl_val));
+		addr = l1->read_addr;
+		cnt = l1->read_addr_num;
+		while (cnt) {
+			QLCNIC_RD_DUMP_REG(addr, base, &data);
+			*buffer++ = cpu_to_le32(data);
+			addr += l1->read_addr_stride;
+			cnt--;
+		}
+		val += l1->stride;
+	}
+	return l1->no_ops * l1->read_addr_num * sizeof(u32);
+}
+
+static u32
+qlcnic_dump_l2_cache(struct qlcnic_adapter *adapter,
+	struct qlcnic_dump_entry *entry, u32 *buffer)
+{
+	int i;
+	u32 cnt, val, data, addr;
+	u8 poll_mask, poll_to, time_out = 0;
+	void __iomem *base = adapter->ahw->pci_base0;
+	struct __cache *l2 = &entry->region.cache;
+
+	val = l2->init_tag_val;
+	poll_mask = LSB(MSW(l2->ctrl_val));
+	poll_to = MSB(MSW(l2->ctrl_val));
+
+	for (i = 0; i < l2->no_ops; i++) {
+		QLCNIC_WR_DUMP_REG(l2->addr, base, val);
+		do {
+			QLCNIC_WR_DUMP_REG(l2->ctrl_addr, base,
+				LSW(l2->ctrl_val));
+			QLCNIC_RD_DUMP_REG(l2->ctrl_addr, base, &data);
+			if (!(data & poll_mask))
+				break;
+			msleep(1);
+			time_out++;
+		} while (time_out <= poll_to);
+		if (time_out > poll_to)
+			return -EINVAL;
+
+		addr = l2->read_addr;
+		cnt = l2->read_addr_num;
+		while (cnt) {
+			QLCNIC_RD_DUMP_REG(addr, base, &data);
+			*buffer++ = cpu_to_le32(data);
+			addr += l2->read_addr_stride;
+			cnt--;
+		}
+		val += l2->stride;
+	}
+	return l2->no_ops * l2->read_addr_num * sizeof(u32);
+}
+
+static u32
+qlcnic_read_memory(struct qlcnic_adapter *adapter,
+	struct qlcnic_dump_entry *entry, u32 *buffer)
+{
+	u32 addr, data, test, ret = 0;
+	int i, reg_read;
+	struct __mem *mem = &entry->region.mem;
+	void __iomem *base = adapter->ahw->pci_base0;
+
+	reg_read = mem->size;
+	addr = mem->addr;
+	/* check for data size of multiple of 16 and 16 byte alignment */
+	if ((addr & 0xf) || (reg_read%16)) {
+		dev_info(&adapter->pdev->dev,
+			"Unaligned memory addr:0x%x size:0x%x\n",
+			addr, reg_read);
+		return -EINVAL;
+	}
+
+	mutex_lock(&adapter->ahw->mem_lock);
+
+	while (reg_read != 0) {
+		QLCNIC_WR_DUMP_REG(MIU_TEST_ADDR_LO, base, addr);
+		QLCNIC_WR_DUMP_REG(MIU_TEST_ADDR_HI, base, 0);
+		QLCNIC_WR_DUMP_REG(MIU_TEST_CTR, base,
+			TA_CTL_ENABLE | TA_CTL_START);
+
+		for (i = 0; i < MAX_CTL_CHECK; i++) {
+			QLCNIC_RD_DUMP_REG(MIU_TEST_CTR, base, &test);
+			if (!(test & TA_CTL_BUSY))
+				break;
+		}
+		if (i == MAX_CTL_CHECK) {
+			if (printk_ratelimit()) {
+				dev_err(&adapter->pdev->dev,
+					"failed to read through agent\n");
+				ret = -EINVAL;
+				goto out;
+			}
+		}
+		for (i = 0; i < 4; i++) {
+			QLCNIC_RD_DUMP_REG(MIU_TEST_READ_DATA[i], base, &data);
+			*buffer++ = cpu_to_le32(data);
+		}
+		addr += 16;
+		reg_read -= 16;
+		ret += 16;
+	}
+out:
+	mutex_unlock(&adapter->ahw->mem_lock);
+	return mem->size;
+}
+
+static u32
+qlcnic_dump_nop(struct qlcnic_adapter *adapter,
+	struct qlcnic_dump_entry *entry, u32 *buffer)
+{
+	entry->hdr.flags |= QLCNIC_DUMP_SKIP;
+	return 0;
+}
+
+struct qlcnic_dump_operations fw_dump_ops[] = {
+	{ QLCNIC_DUMP_NOP, qlcnic_dump_nop },
+	{ QLCNIC_DUMP_READ_CRB, qlcnic_dump_crb },
+	{ QLCNIC_DUMP_READ_MUX, qlcnic_dump_mux },
+	{ QLCNIC_DUMP_QUEUE, qlcnic_dump_que },
+	{ QLCNIC_DUMP_BRD_CONFIG, qlcnic_read_rom },
+	{ QLCNIC_DUMP_READ_OCM, qlcnic_dump_ocm },
+	{ QLCNIC_DUMP_PEG_REG, qlcnic_dump_ctrl },
+	{ QLCNIC_DUMP_L1_DTAG, qlcnic_dump_l1_cache },
+	{ QLCNIC_DUMP_L1_ITAG, qlcnic_dump_l1_cache },
+	{ QLCNIC_DUMP_L1_DATA, qlcnic_dump_l1_cache },
+	{ QLCNIC_DUMP_L1_INST, qlcnic_dump_l1_cache },
+	{ QLCNIC_DUMP_L2_DTAG, qlcnic_dump_l2_cache },
+	{ QLCNIC_DUMP_L2_ITAG, qlcnic_dump_l2_cache },
+	{ QLCNIC_DUMP_L2_DATA, qlcnic_dump_l2_cache },
+	{ QLCNIC_DUMP_L2_INST, qlcnic_dump_l2_cache },
+	{ QLCNIC_DUMP_READ_ROM, qlcnic_read_rom },
+	{ QLCNIC_DUMP_READ_MEM, qlcnic_read_memory },
+	{ QLCNIC_DUMP_READ_CTRL, qlcnic_dump_ctrl },
+	{ QLCNIC_DUMP_TLHDR, qlcnic_dump_nop },
+	{ QLCNIC_DUMP_RDEND, qlcnic_dump_nop },
+};
+
+/* Walk the template and collect dump for each entry in the dump template */
+static int
+qlcnic_valid_dump_entry(struct device *dev, struct qlcnic_dump_entry *entry,
+	u32 size)
+{
+	int ret = 1;
+	if (size != entry->hdr.cap_size) {
+		dev_info(dev,
+		"Invalidate dump, Type:%d\tMask:%d\tSize:%dCap_size:%d\n",
+		entry->hdr.type, entry->hdr.mask, size, entry->hdr.cap_size);
+		dev_info(dev, "Aborting further dump capture\n");
+		ret = 0;
+	}
+	return ret;
+}
+
+int qlcnic_dump_fw(struct qlcnic_adapter *adapter)
+{
+	u32 *buffer;
+	char mesg[64];
+	char *msg[] = {mesg, NULL};
+	int i, k, ops_cnt, ops_index, dump_size = 0;
+	u32 entry_offset, dump, no_entries, buf_offset = 0;
+	struct qlcnic_dump_entry *entry;
+	struct qlcnic_fw_dump *fw_dump = &adapter->ahw->fw_dump;
+	struct qlcnic_dump_template_hdr *tmpl_hdr = fw_dump->tmpl_hdr;
+
+	if (fw_dump->clr) {
+		dev_info(&adapter->pdev->dev,
+			"Previous dump not cleared, not capturing dump\n");
+		return -EIO;
+	}
+	/* Calculate the size for dump data area only */
+	for (i = 2, k = 1; (i & QLCNIC_DUMP_MASK_MAX); i <<= 1, k++)
+		if (i & tmpl_hdr->drv_cap_mask)
+			dump_size += tmpl_hdr->cap_sizes[k];
+	if (!dump_size)
+		return -EIO;
+
+	fw_dump->data = vzalloc(dump_size);
+	if (!fw_dump->data) {
+		dev_info(&adapter->pdev->dev,
+			"Unable to allocate (%d KB) for fw dump\n",
+			dump_size/1024);
+		return -ENOMEM;
+	}
+	buffer = fw_dump->data;
+	fw_dump->size = dump_size;
+	no_entries = tmpl_hdr->num_entries;
+	ops_cnt = ARRAY_SIZE(fw_dump_ops);
+	entry_offset = tmpl_hdr->offset;
+	tmpl_hdr->sys_info[0] = QLCNIC_DRIVER_VERSION;
+	tmpl_hdr->sys_info[1] = adapter->fw_version;
+
+	for (i = 0; i < no_entries; i++) {
+		entry = (struct qlcnic_dump_entry *) ((void *) tmpl_hdr +
+			entry_offset);
+		if (!(entry->hdr.mask & tmpl_hdr->drv_cap_mask)) {
+			entry->hdr.flags |= QLCNIC_DUMP_SKIP;
+			entry_offset += entry->hdr.offset;
+			continue;
+		}
+		/* Find the handler for this entry */
+		ops_index = 0;
+		while (ops_index < ops_cnt) {
+			if (entry->hdr.type == fw_dump_ops[ops_index].opcode)
+				break;
+			ops_index++;
+		}
+		if (ops_index == ops_cnt) {
+			dev_info(&adapter->pdev->dev,
+				"Invalid entry type %d, exiting dump\n",
+				entry->hdr.type);
+			goto error;
+		}
+		/* Collect dump for this entry */
+		dump = fw_dump_ops[ops_index].handler(adapter, entry, buffer);
+		if (dump && !qlcnic_valid_dump_entry(&adapter->pdev->dev, entry,
+			dump))
+			entry->hdr.flags |= QLCNIC_DUMP_SKIP;
+		buf_offset += entry->hdr.cap_size;
+		entry_offset += entry->hdr.offset;
+		buffer = fw_dump->data + buf_offset;
+	}
+	if (dump_size != buf_offset) {
+		dev_info(&adapter->pdev->dev,
+			"Captured(%d) and expected size(%d) do not match\n",
+			buf_offset, dump_size);
+		goto error;
+	} else {
+		fw_dump->clr = 1;
+		snprintf(mesg, sizeof(mesg), "FW dump for device: %d\n",
+			adapter->pdev->devfn);
+		dev_info(&adapter->pdev->dev, "Dump data, %d bytes captured\n",
+			fw_dump->size);
+		/* Send a udev event to notify availability of FW dump */
+		kobject_uevent_env(&adapter->pdev->dev.kobj, KOBJ_CHANGE, msg);
+		return 0;
+	}
+error:
+	vfree(fw_dump->data);
+	return -EINVAL;
+}
-- 
cgit v1.2.2


From 54ff502c283b6cf77c95c05c99dbca40d910b17d Mon Sep 17 00:00:00 2001
From: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Date: Thu, 2 Jun 2011 12:42:21 +0000
Subject: qlcnic: Fix bug in FW queue dump

Due to a change in FW template, a bug was introduced in dump queue entries. This is
fixed by reinitializing queue address before looping for each que dump operation.

Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlcnic/qlcnic_hw.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net/qlcnic/qlcnic_hw.c')

diff --git a/drivers/net/qlcnic/qlcnic_hw.c b/drivers/net/qlcnic/qlcnic_hw.c
index e9656616f2a2..a5d9fbf9d816 100644
--- a/drivers/net/qlcnic/qlcnic_hw.c
+++ b/drivers/net/qlcnic/qlcnic_hw.c
@@ -1406,6 +1406,7 @@ qlcnic_dump_que(struct qlcnic_adapter *adapter, struct qlcnic_dump_entry *entry,
 
 	for (loop = 0; loop < que->no_ops; loop++) {
 		QLCNIC_WR_DUMP_REG(que->sel_addr, base, que_id);
+		addr = que->read_addr;
 		for (i = 0; i < cnt; i++) {
 			QLCNIC_RD_DUMP_REG(addr, base, &data);
 			*buffer++ = cpu_to_le32(data);
-- 
cgit v1.2.2