From b8f9a02924bbeb0c46ca4c19561cbe765b80e264 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 22 Aug 2014 18:55:45 -0700 Subject: net: phy: bcm7xxx: enable EEE at the PHY level The 28nm Gigabit PHY on BCM7xxx chips comes out of reset with absolutely no EEE capabilities, such that we would actually return that we do not support EEE when accessing 3.20 (MDIO_PCS_EEE_ABLE) registers. Poke through the vendor-specific C45 register to enable EEE globally at the PHY level, and advertise supported EEE modes. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/bcm7xxx.c | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) (limited to 'drivers/net/phy') diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c index 29e256a4ed57..e98c510b75c5 100644 --- a/drivers/net/phy/bcm7xxx.c +++ b/drivers/net/phy/bcm7xxx.c @@ -14,6 +14,7 @@ #include #include #include +#include /* Broadcom BCM7xxx internal PHY registers */ #define MII_BCM7XXX_CHANNEL_WIDTH 0x2000 @@ -167,6 +168,32 @@ static int bcm7xxx_apd_enable(struct phy_device *phydev) return bcm54xx_shadow_write(phydev, BCM54XX_SHD_APD, val); } +static int bcm7xxx_eee_enable(struct phy_device *phydev) +{ + int val; + + val = phy_read_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL, + MDIO_MMD_AN, phydev->addr); + if (val < 0) + return val; + + /* Enable general EEE feature at the PHY level */ + val |= LPI_FEATURE_EN | LPI_FEATURE_EN_DIG1000X; + + phy_write_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL, + MDIO_MMD_AN, phydev->addr, val); + + /* Advertise supported modes */ + val = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_ADV, + MDIO_MMD_AN, phydev->addr); + + val |= (MDIO_AN_EEE_ADV_100TX | MDIO_AN_EEE_ADV_1000T); + phy_write_mmd_indirect(phydev, MDIO_AN_EEE_ADV, + MDIO_MMD_AN, phydev->addr, val); + + return 0; +} + static int bcm7xxx_28nm_config_init(struct phy_device *phydev) { int ret; @@ -179,6 +206,10 @@ static int bcm7xxx_28nm_config_init(struct phy_device *phydev) if (ret) return ret; + ret = bcm7xxx_eee_enable(phydev); + if (ret) + return ret; + return bcm7xxx_apd_enable(phydev); } -- cgit v1.2.2