From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/net/ni5010.h | 144 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 144 insertions(+) create mode 100644 drivers/net/ni5010.h (limited to 'drivers/net/ni5010.h') diff --git a/drivers/net/ni5010.h b/drivers/net/ni5010.h new file mode 100644 index 000000000000..e10e717fcd76 --- /dev/null +++ b/drivers/net/ni5010.h @@ -0,0 +1,144 @@ +/* + * Racal-Interlan ni5010 Ethernet definitions + * + * This is an extension to the Linux operating system, and is covered by the + * same GNU General Public License that covers that work. + * + * copyrights (c) 1996 by Jan-Pascal van Best (jvbest@wi.leidenuniv.nl) + * + * I have done a look in the following sources: + * crynwr-packet-driver by Russ Nelson + */ + +#define NI5010_BUFSIZE 2048 /* number of bytes in a buffer */ + +#define NI5010_MAGICVAL0 0x00 /* magic-values for ni5010 card */ +#define NI5010_MAGICVAL1 0x55 +#define NI5010_MAGICVAL2 0xAA + +#define SA_ADDR0 0x02 +#define SA_ADDR1 0x07 +#define SA_ADDR2 0x01 + +/* The number of low I/O ports used by the ni5010 ethercard. */ +#define NI5010_IO_EXTENT 32 + +#define PRINTK(x) if (NI5010_DEBUG) printk x +#define PRINTK2(x) if (NI5010_DEBUG>=2) printk x +#define PRINTK3(x) if (NI5010_DEBUG>=3) printk x + +/* The various IE command registers */ +#define EDLC_XSTAT (ioaddr + 0x00) /* EDLC transmit csr */ +#define EDLC_XCLR (ioaddr + 0x00) /* EDLC transmit "Clear IRQ" */ +#define EDLC_XMASK (ioaddr + 0x01) /* EDLC transmit "IRQ Masks" */ +#define EDLC_RSTAT (ioaddr + 0x02) /* EDLC receive csr */ +#define EDLC_RCLR (ioaddr + 0x02) /* EDLC receive "Clear IRQ" */ +#define EDLC_RMASK (ioaddr + 0x03) /* EDLC receive "IRQ Masks" */ +#define EDLC_XMODE (ioaddr + 0x04) /* EDLC transmit Mode */ +#define EDLC_RMODE (ioaddr + 0x05) /* EDLC receive Mode */ +#define EDLC_RESET (ioaddr + 0x06) /* EDLC RESET register */ +#define EDLC_TDR1 (ioaddr + 0x07) /* "Time Domain Reflectometry" reg1 */ +#define EDLC_ADDR (ioaddr + 0x08) /* EDLC station address, 6 bytes */ + /* 0x0E doesn't exist for r/w */ +#define EDLC_TDR2 (ioaddr + 0x0f) /* "Time Domain Reflectometry" reg2 */ +#define IE_GP (ioaddr + 0x10) /* GP pointer (word register) */ + /* 0x11 is 2nd byte of GP Pointer */ +#define IE_RCNT (ioaddr + 0x10) /* Count of bytes in rcv'd packet */ + /* 0x11 is 2nd byte of "Byte Count" */ +#define IE_MMODE (ioaddr + 0x12) /* Memory Mode register */ +#define IE_DMA_RST (ioaddr + 0x13) /* IE DMA Reset. write only */ +#define IE_ISTAT (ioaddr + 0x13) /* IE Interrupt Status. read only */ +#define IE_RBUF (ioaddr + 0x14) /* IE Receive Buffer port */ +#define IE_XBUF (ioaddr + 0x15) /* IE Transmit Buffer port */ +#define IE_SAPROM (ioaddr + 0x16) /* window on station addr prom */ +#define IE_RESET (ioaddr + 0x17) /* any write causes Board Reset */ + +/* bits in EDLC_XSTAT, interrupt clear on write, status when read */ +#define XS_TPOK 0x80 /* transmit packet successful */ +#define XS_CS 0x40 /* carrier sense */ +#define XS_RCVD 0x20 /* transmitted packet received */ +#define XS_SHORT 0x10 /* transmission media is shorted */ +#define XS_UFLW 0x08 /* underflow. iff failed board */ +#define XS_COLL 0x04 /* collision occurred */ +#define XS_16COLL 0x02 /* 16th collision occurred */ +#define XS_PERR 0x01 /* parity error */ + +#define XS_CLR_UFLW 0x08 /* clear underflow */ +#define XS_CLR_COLL 0x04 /* clear collision */ +#define XS_CLR_16COLL 0x02 /* clear 16th collision */ +#define XS_CLR_PERR 0x01 /* clear parity error */ + +/* bits in EDLC_XMASK, mask/enable transmit interrupts. register is r/w */ +#define XM_TPOK 0x80 /* =1 to enable Xmt Pkt OK interrupts */ +#define XM_RCVD 0x20 /* =1 to enable Xmt Pkt Rcvd ints */ +#define XM_UFLW 0x08 /* =1 to enable Xmt Underflow ints */ +#define XM_COLL 0x04 /* =1 to enable Xmt Collision ints */ +#define XM_COLL16 0x02 /* =1 to enable Xmt 16th Coll ints */ +#define XM_PERR 0x01 /* =1 to enable Xmt Parity Error ints */ + /* note: always clear this bit */ +#define XM_ALL (XM_TPOK | XM_RCVD | XM_UFLW | XM_COLL | XM_COLL16) + +/* bits in EDLC_RSTAT, interrupt clear on write, status when read */ +#define RS_PKT_OK 0x80 /* received good packet */ +#define RS_RST_PKT 0x10 /* RESET packet received */ +#define RS_RUNT 0x08 /* Runt Pkt rcvd. Len < 64 Bytes */ +#define RS_ALIGN 0x04 /* Alignment error. not 8 bit aligned */ +#define RS_CRC_ERR 0x02 /* Bad CRC on rcvd pkt */ +#define RS_OFLW 0x01 /* overflow for rcv FIFO */ +#define RS_VALID_BITS ( RS_PKT_OK | RS_RST_PKT | RS_RUNT | RS_ALIGN | RS_CRC_ERR | RS_OFLW ) + /* all valid RSTAT bits */ + +#define RS_CLR_PKT_OK 0x80 /* clear rcvd packet interrupt */ +#define RS_CLR_RST_PKT 0x10 /* clear RESET packet received */ +#define RS_CLR_RUNT 0x08 /* clear Runt Pckt received */ +#define RS_CLR_ALIGN 0x04 /* clear Alignment error */ +#define RS_CLR_CRC_ERR 0x02 /* clear CRC error */ +#define RS_CLR_OFLW 0x01 /* clear rcv FIFO Overflow */ + +/* bits in EDLC_RMASK, mask/enable receive interrupts. register is r/w */ +#define RM_PKT_OK 0x80 /* =1 to enable rcvd good packet ints */ +#define RM_RST_PKT 0x10 /* =1 to enable RESET packet ints */ +#define RM_RUNT 0x08 /* =1 to enable Runt Pkt rcvd ints */ +#define RM_ALIGN 0x04 /* =1 to enable Alignment error ints */ +#define RM_CRC_ERR 0x02 /* =1 to enable Bad CRC error ints */ +#define RM_OFLW 0x01 /* =1 to enable overflow error ints */ + +/* bits in EDLC_RMODE, set Receive Packet mode. register is r/w */ +#define RMD_TEST 0x80 /* =1 for Chip testing. normally 0 */ +#define RMD_ADD_SIZ 0x10 /* =1 5-byte addr match. normally 0 */ +#define RMD_EN_RUNT 0x08 /* =1 enable runt rcv. normally 0 */ +#define RMD_EN_RST 0x04 /* =1 to rcv RESET pkt. normally 0 */ + +#define RMD_PROMISC 0x03 /* receive *all* packets. unusual */ +#define RMD_MULTICAST 0x02 /* receive multicasts too. unusual */ +#define RMD_BROADCAST 0x01 /* receive broadcasts & normal. usual */ +#define RMD_NO_PACKETS 0x00 /* don't receive any packets. unusual */ + +/* bits in EDLC_XMODE, set Transmit Packet mode. register is r/w */ +#define XMD_COLL_CNT 0xf0 /* coll's since success. read-only */ +#define XMD_IG_PAR 0x08 /* =1 to ignore parity. ALWAYS set */ +#define XMD_T_MODE 0x04 /* =1 to power xcvr. ALWAYS set this */ +#define XMD_LBC 0x02 /* =1 for loopbakc. normally set */ +#define XMD_DIS_C 0x01 /* =1 disables contention. normally 0 */ + +/* bits in EDLC_RESET, write only */ +#define RS_RESET 0x80 /* =1 to hold EDLC in reset state */ + +/* bits in IE_MMODE, write only */ +#define MM_EN_DMA 0x80 /* =1 begin DMA xfer, Cplt clrs it */ +#define MM_EN_RCV 0x40 /* =1 allows Pkt rcv. clr'd by rcv */ +#define MM_EN_XMT 0x20 /* =1 begin Xmt pkt. Cplt clrs it */ +#define MM_BUS_PAGE 0x18 /* =00 ALWAYS. Used when MUX=1 */ +#define MM_NET_PAGE 0x06 /* =00 ALWAYS. Used when MUX=0 */ +#define MM_MUX 0x01 /* =1 means Rcv Buff on system bus */ + /* =0 means Xmt Buff on system bus */ + +/* bits in IE_ISTAT, read only */ +#define IS_TDIAG 0x80 /* =1 if Diagnostic problem */ +#define IS_EN_RCV 0x20 /* =1 until frame is rcv'd cplt */ +#define IS_EN_XMT 0x10 /* =1 until frame is xmt'd cplt */ +#define IS_EN_DMA 0x08 /* =1 until DMA is cplt or aborted */ +#define IS_DMA_INT 0x04 /* =0 iff DMA done interrupt. */ +#define IS_R_INT 0x02 /* =0 iff unmasked Rcv interrupt */ +#define IS_X_INT 0x01 /* =0 iff unmasked Xmt interrupt */ + -- cgit v1.2.2