From 0795af5729b18218767fab27c44b1384f72dc9ad Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 3 Oct 2007 17:59:30 -0700 Subject: [NET]: Introduce and use print_mac() and DECLARE_MAC_BUF() This is nicer than the MAC_FMT stuff. Signed-off-by: Joe Perches Signed-off-by: David S. Miller --- drivers/net/lance.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/net/lance.c') diff --git a/drivers/net/lance.c b/drivers/net/lance.c index 7b17212d687e..977ed3401bb3 100644 --- a/drivers/net/lance.c +++ b/drivers/net/lance.c @@ -466,6 +466,7 @@ static int __init lance_probe1(struct net_device *dev, int ioaddr, int irq, int unsigned long flags; int err = -ENOMEM; void __iomem *bios; + DECLARE_MAC_BUF(mac); /* First we look for special cases. Check for HP's on-board ethernet by looking for 'HP' in the BIOS. @@ -522,12 +523,13 @@ static int __init lance_probe1(struct net_device *dev, int ioaddr, int irq, int /* We can't allocate dev->priv from alloc_etherdev() because it must a ISA DMA-able region. */ chipname = chip_table[lance_version].name; - printk("%s: %s at %#3x,", dev->name, chipname, ioaddr); + printk("%s: %s at %#3x, ", dev->name, chipname, ioaddr); /* There is a 16 byte station address PROM at the base address. The first six bytes are the station address. */ for (i = 0; i < 6; i++) - printk(" %2.2x", dev->dev_addr[i] = inb(ioaddr + i)); + dev->dev_addr[i] = inb(ioaddr + i); + printk("%s", print_mac(mac, dev->dev_addr)); dev->base_addr = ioaddr; /* Make certain the data structures used by the LANCE are aligned and DMAble. */ -- cgit v1.2.2