From 47ce9c4821fa41ef72c1004e1a362d08334cd717 Mon Sep 17 00:00:00 2001 From: Santosh Rastapur Date: Fri, 8 Mar 2013 03:35:29 +0000 Subject: cxgb4: Allow for backward compatibility with new VPD scheme. New scheme calls for 3rd party VPD at offset 0x0 and Chelsio VPD at offset 0x400 of the function. If no 3rd party VPD is present, then a copy of Chelsio's VPD will be at offset 0x0 to keep in line with PCI spec which requires the VPD to be present at offset 0x0. Signed-off-by: Santosh Rastapur Signed-off-by: Vipul Pandya Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c index 4ce62031f62f..8049268ce0f2 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c @@ -497,8 +497,9 @@ int t4_memory_write(struct adapter *adap, int mtype, u32 addr, u32 len, } #define EEPROM_STAT_ADDR 0x7bfc -#define VPD_BASE 0 #define VPD_LEN 512 +#define VPD_BASE 0x400 +#define VPD_BASE_OLD 0 /** * t4_seeprom_wp - enable/disable EEPROM write protection @@ -524,7 +525,7 @@ int t4_seeprom_wp(struct adapter *adapter, bool enable) int get_vpd_params(struct adapter *adapter, struct vpd_params *p) { u32 cclk_param, cclk_val; - int i, ret; + int i, ret, addr; int ec, sn; u8 *vpd, csum; unsigned int vpdr_len, kw_offset, id_len; @@ -533,7 +534,12 @@ int get_vpd_params(struct adapter *adapter, struct vpd_params *p) if (!vpd) return -ENOMEM; - ret = pci_read_vpd(adapter->pdev, VPD_BASE, VPD_LEN, vpd); + ret = pci_read_vpd(adapter->pdev, VPD_BASE, sizeof(u32), vpd); + if (ret < 0) + goto out; + addr = *vpd == 0x82 ? VPD_BASE : VPD_BASE_OLD; + + ret = pci_read_vpd(adapter->pdev, addr, VPD_LEN, vpd); if (ret < 0) goto out; -- cgit v1.2.2 From fae8563b25f73dc584a07bcda7a82750ff4f7672 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Wed, 27 Feb 2013 16:50:38 +0000 Subject: sfc: Only use TX push if a single descriptor is to be written Using TX push when notifying the NIC of multiple new descriptors in the ring will very occasionally cause the TX DMA engine to re-use an old descriptor. This can result in a duplicated or partly duplicated packet (new headers with old data), or an IOMMU page fault. This does not happen when the pushed descriptor is the only one written. TX push also provides little latency benefit when a packet requires more than one descriptor. Signed-off-by: Ben Hutchings --- drivers/net/ethernet/sfc/nic.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/sfc/nic.c b/drivers/net/ethernet/sfc/nic.c index 0ad790cc473c..eaa8e874a3cb 100644 --- a/drivers/net/ethernet/sfc/nic.c +++ b/drivers/net/ethernet/sfc/nic.c @@ -376,7 +376,8 @@ efx_may_push_tx_desc(struct efx_tx_queue *tx_queue, unsigned int write_count) return false; tx_queue->empty_read_count = 0; - return ((empty_read_count ^ write_count) & ~EFX_EMPTY_COUNT_VALID) == 0; + return ((empty_read_count ^ write_count) & ~EFX_EMPTY_COUNT_VALID) == 0 + && tx_queue->write_count - write_count == 1; } /* For each entry inserted into the software descriptor ring, create a -- cgit v1.2.2 From d35162f89b8f00537d7b240b76d2d0e8b8d29aa0 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Tue, 12 Mar 2013 06:31:19 +0000 Subject: net: ethernet: cpsw: fix usage of cpdma_check_free_tx_desc() Commit fae50823d0 ("net: ethernet: davinci_cpdma: Add boundary for rx and tx descriptors") introduced a function to check the current allocation state of tx packets. The return value is taken into account to stop the netqork queue on the adapter in case there are no free slots. However, cpdma_check_free_tx_desc() returns 'true' if there is room in the bitmap, not 'false', so the usage of the function is wrong. Signed-off-by: Daniel Mack Cc: Mugunthan V N Reported-by: Sven Neumann Reported-by: Andreas Fenkart Tested-by: Mugunthan V N Acked-by: Mugunthan V N Tested-by: Andreas Fenkart Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/cpsw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index 01ffbc486982..75c48558e6fd 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -905,7 +905,7 @@ static netdev_tx_t cpsw_ndo_start_xmit(struct sk_buff *skb, /* If there is no more tx desc left free then we need to * tell the kernel to stop sending us tx frames. */ - if (unlikely(cpdma_check_free_tx_desc(priv->txch))) + if (unlikely(!cpdma_check_free_tx_desc(priv->txch))) netif_stop_queue(ndev); return NETDEV_TX_OK; -- cgit v1.2.2 From 7c6cdead7cc9a99650d15497aae47d7472217eb1 Mon Sep 17 00:00:00 2001 From: Nithin Sujir Date: Tue, 12 Mar 2013 15:32:48 +0000 Subject: tg3: 5715 does not link up when autoneg off Commit d13ba512cbba7de5d55d7a3b2aae7d83c8921457 ("tg3: Remove SPEED_UNKNOWN checks") cleaned up the autoneg advertisement by removing some dead code. One effect of this change was that the advertisement register would not be updated if autoneg is turned off. This exposed a bug on the 5715 device w.r.t linking. The 5715 defaults to advertise only 10Mb Full duplex. But with autoneg disabled, it needs the configured speed enabled in the advertisement register to link up. This patch adds the work around to advertise all speeds on the 5715 when autoneg is disabled. Reported-by: Marcin Miotk Reviewed-by: Benjamin Li Signed-off-by: Nithin Nayak Sujir Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 93729f942358..67d2663b3974 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -4130,6 +4130,14 @@ static void tg3_phy_copper_begin(struct tg3 *tp) tp->link_config.active_speed = tp->link_config.speed; tp->link_config.active_duplex = tp->link_config.duplex; + if (tg3_asic_rev(tp) == ASIC_REV_5714) { + /* With autoneg disabled, 5715 only links up when the + * advertisement register has the configured speed + * enabled. + */ + tg3_writephy(tp, MII_ADVERTISE, ADVERTISE_ALL); + } + bmcr = 0; switch (tp->link_config.speed) { default: -- cgit v1.2.2 From d97e74976982a35168c7f131cce0d93537337a26 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Thu, 14 Mar 2013 05:12:01 +0000 Subject: net: fec: restart the FEC when PHY speed changes Proviously we would only restart the FEC when PHY link or duplex state changed. PHY does not always bring down the link for speed changes, in which case we would not detect any change and keep FEC running. Switching link speed without restarting the FEC results in the FEC being stuck in an indefinite state, generating error conditions for every packet. Signed-off-by: Lucas Stach Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fec.c | 26 +++++++++++++++----------- drivers/net/ethernet/freescale/fec.h | 1 + 2 files changed, 16 insertions(+), 11 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c index 069a155d16ed..61d2e6202bf3 100644 --- a/drivers/net/ethernet/freescale/fec.c +++ b/drivers/net/ethernet/freescale/fec.c @@ -934,24 +934,28 @@ static void fec_enet_adjust_link(struct net_device *ndev) goto spin_unlock; } - /* Duplex link change */ if (phy_dev->link) { - if (fep->full_duplex != phy_dev->duplex) { - fec_restart(ndev, phy_dev->duplex); - /* prevent unnecessary second fec_restart() below */ + if (!fep->link) { fep->link = phy_dev->link; status_change = 1; } - } - /* Link on or off change */ - if (phy_dev->link != fep->link) { - fep->link = phy_dev->link; - if (phy_dev->link) + if (fep->full_duplex != phy_dev->duplex) + status_change = 1; + + if (phy_dev->speed != fep->speed) { + fep->speed = phy_dev->speed; + status_change = 1; + } + + /* if any of the above changed restart the FEC */ + if (status_change) fec_restart(ndev, phy_dev->duplex); - else + } else { + if (fep->link) { fec_stop(ndev); - status_change = 1; + status_change = 1; + } } spin_unlock: diff --git a/drivers/net/ethernet/freescale/fec.h b/drivers/net/ethernet/freescale/fec.h index f5390071efd0..eb4372962839 100644 --- a/drivers/net/ethernet/freescale/fec.h +++ b/drivers/net/ethernet/freescale/fec.h @@ -240,6 +240,7 @@ struct fec_enet_private { phy_interface_t phy_interface; int link; int full_duplex; + int speed; struct completion mdio_done; int irq[FEC_IRQ_NUM]; int bufdesc_ex; -- cgit v1.2.2 From 3f104c38259dcb3e5443c246f0805bc04d887cc3 Mon Sep 17 00:00:00 2001 From: Georg Hofmann Date: Thu, 14 Mar 2013 06:54:09 +0000 Subject: net: fec: fix missing napi_disable call Commit dc975382d2ef36be7e78fac3717927de1a5abcd8 introduces napi support but never calls napi_disable. This will generate a kernel oops (kernel BUG at include/linux/netdevice.h:473!) every time, when ndo_stop is called followed by ndo_start. Add the missing napi_diable call. Signed-off-by: Georg Hofmann Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fec.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c index 61d2e6202bf3..e3f39372ce25 100644 --- a/drivers/net/ethernet/freescale/fec.c +++ b/drivers/net/ethernet/freescale/fec.c @@ -1441,6 +1441,7 @@ fec_enet_close(struct net_device *ndev) struct fec_enet_private *fep = netdev_priv(ndev); /* Don't know what to do yet. */ + napi_disable(&fep->napi); fep->opened = 0; netif_stop_queue(ndev); fec_stop(ndev); -- cgit v1.2.2 From db0b82760ef84562b5c0fa880c22b4f352545554 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 14 Mar 2013 11:56:42 +0000 Subject: ethernet/tulip: DE4x5 needs VIRT_TO_BUS The automated ARM build tests have shown that the tulip de4x5 driver uses the old-style virt_to_bus() interface on some architectures. Alpha, Sparc and PowerPC did not hit this problem, because they use a different code path, and most other architectures actually do provide VIRT_TO_BUS. Signed-off-by: Arnd Bergmann Cc: Grant Grundler Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller --- drivers/net/ethernet/dec/tulip/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/dec/tulip/Kconfig b/drivers/net/ethernet/dec/tulip/Kconfig index 0c37fb2cc867..1df33c799c00 100644 --- a/drivers/net/ethernet/dec/tulip/Kconfig +++ b/drivers/net/ethernet/dec/tulip/Kconfig @@ -108,6 +108,7 @@ config TULIP_DM910X config DE4X5 tristate "Generic DECchip & DIGITAL EtherWORKS PCI/EISA" depends on (PCI || EISA) + depends on VIRT_TO_BUS || ALPHA || PPC || SPARC select CRC32 ---help--- This is support for the DIGITAL series of PCI/EISA Ethernet cards. -- cgit v1.2.2 From 75b9b61bb8a18e75afe7b10dd55681e748fa27df Mon Sep 17 00:00:00 2001 From: Mugunthan V N Date: Fri, 15 Mar 2013 04:10:16 +0000 Subject: drivers: net: ethernet: ti: davinci_emac: fix usage of cpdma_check_free_tx_desc() Fix which was done in the following commit in cpsw driver has to be taken forward to davinci emac driver as well. commit d35162f89b8f00537d7b240b76d2d0e8b8d29aa0 Author: Daniel Mack Date: Tue Mar 12 06:31:19 2013 +0000 net: ethernet: cpsw: fix usage of cpdma_check_free_tx_desc() Commit fae50823d0 ("net: ethernet: davinci_cpdma: Add boundary for rx and tx descriptors") introduced a function to check the current allocation state of tx packets. The return value is taken into account to stop the netqork queue on the adapter in case there are no free slots. However, cpdma_check_free_tx_desc() returns 'true' if there is room in the bitmap, not 'false', so the usage of the function is wrong. Reported-by: Prabhakar Lad Tested-by: Prabhakar Lad Signed-off-by: Mugunthan V N Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/davinci_emac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c index 52c05366599a..ae1b77aa199f 100644 --- a/drivers/net/ethernet/ti/davinci_emac.c +++ b/drivers/net/ethernet/ti/davinci_emac.c @@ -1102,7 +1102,7 @@ static int emac_dev_xmit(struct sk_buff *skb, struct net_device *ndev) /* If there is no more tx desc left free then we need to * tell the kernel to stop sending us tx frames. */ - if (unlikely(cpdma_check_free_tx_desc(priv->txchan))) + if (unlikely(!cpdma_check_free_tx_desc(priv->txchan))) netif_stop_queue(ndev); return NETDEV_TX_OK; -- cgit v1.2.2 From 722c6f585088a2c392b4c5d01b87a584bb8fb73f Mon Sep 17 00:00:00 2001 From: Michal Schmidt Date: Fri, 15 Mar 2013 05:27:54 +0000 Subject: bnx2x: add missing napi deletion in error path If the hardware initialization fails in bnx2x_nic_load() after adding napi objects, they would not be deleted. A subsequent attempt to unload the bnx2x module detects a corruption in the napi list. Add the missing napi deletion to the error path. Signed-off-by: Michal Schmidt Acked-by: Dmitry Kravkov Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index a923bc4d5a1f..4046f97378c2 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -2760,6 +2760,7 @@ load_error2: bp->port.pmf = 0; load_error1: bnx2x_napi_disable(bp); + bnx2x_del_all_napi(bp); /* clear pf_load status, as it was already set */ if (IS_PF(bp)) -- cgit v1.2.2 From b009aac12cd0fe34293c68af8ac48b85be3bd858 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Maciej=20=C5=BBenczykowski?= Date: Fri, 15 Mar 2013 11:56:17 +0000 Subject: bnx2x: fix occasional statistics off-by-4GB error MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The UPDATE_QSTAT function introduced on February 15, 2012 in commit 1355b704b9ba "bnx2x: consistent statistics after internal driver reload" incorrectly fails to handle overflow during addition of the lower 32-bit field of a stat. This bug is present since 3.4-rc1 and should thus be considered a candidate for stable 3.4+ releases. Google-Bug-Id: 8374428 Signed-off-by: Maciej Żenczykowski Cc: Mintz Yuval Acked-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h index 364e37ecbc5c..198f6f1c9ad5 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h @@ -459,8 +459,9 @@ struct bnx2x_fw_port_stats_old { #define UPDATE_QSTAT(s, t) \ do { \ - qstats->t##_hi = qstats_old->t##_hi + le32_to_cpu(s.hi); \ qstats->t##_lo = qstats_old->t##_lo + le32_to_cpu(s.lo); \ + qstats->t##_hi = qstats_old->t##_hi + le32_to_cpu(s.hi) \ + + ((qstats->t##_lo < qstats_old->t##_lo) ? 1 : 0); \ } while (0) #define UPDATE_QSTAT_OLD(f) \ -- cgit v1.2.2 From 0582b7d15f8a7ae53dd2128b8eb01567b3fd2277 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Tue, 19 Mar 2013 13:40:23 +0000 Subject: sh_eth: fix bitbang memory leak sh_mdio_init() allocates pointer to 'struct bb_info' but only stores it locally, so that sh_mdio_release() can't free it on driver unload. Add the pointer to 'struct bb_info' to 'struct sh_eth_private', so that sh_mdio_init() can save 'bitbang' variable for sh_mdio_release() to be able to free it later... Signed-off-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/sh_eth.c | 5 +++++ drivers/net/ethernet/renesas/sh_eth.h | 1 + 2 files changed, 6 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index 33e96176e4d8..c87862812ead 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -2220,6 +2220,7 @@ static void sh_eth_tsu_init(struct sh_eth_private *mdp) /* MDIO bus release function */ static int sh_mdio_release(struct net_device *ndev) { + struct sh_eth_private *mdp = netdev_priv(ndev); struct mii_bus *bus = dev_get_drvdata(&ndev->dev); /* unregister mdio bus */ @@ -2234,6 +2235,9 @@ static int sh_mdio_release(struct net_device *ndev) /* free bitbang info */ free_mdio_bitbang(bus); + /* free bitbang memory */ + kfree(mdp->bitbang); + return 0; } @@ -2262,6 +2266,7 @@ static int sh_mdio_init(struct net_device *ndev, int id, bitbang->ctrl.ops = &bb_ops; /* MII controller setting */ + mdp->bitbang = bitbang; mdp->mii_bus = alloc_mdio_bitbang(&bitbang->ctrl); if (!mdp->mii_bus) { ret = -ENOMEM; diff --git a/drivers/net/ethernet/renesas/sh_eth.h b/drivers/net/ethernet/renesas/sh_eth.h index bae84fd2e73a..e6655678458e 100644 --- a/drivers/net/ethernet/renesas/sh_eth.h +++ b/drivers/net/ethernet/renesas/sh_eth.h @@ -705,6 +705,7 @@ struct sh_eth_private { const u16 *reg_offset; void __iomem *addr; void __iomem *tsu_addr; + struct bb_info *bitbang; u32 num_rx_ring; u32 num_tx_ring; dma_addr_t rx_desc_dma; -- cgit v1.2.2 From fc0c0900408e05758a0df17c1924ca837fafca5e Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Tue, 19 Mar 2013 13:41:32 +0000 Subject: sh_eth: check TSU registers ioremap() error One must check the result of ioremap() -- in this case it prevents potential kernel oops when initializing TSU registers further on... Signed-off-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/sh_eth.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index c87862812ead..bf5e3cf97c4d 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -2446,6 +2446,11 @@ static int sh_eth_drv_probe(struct platform_device *pdev) } mdp->tsu_addr = ioremap(rtsu->start, resource_size(rtsu)); + if (mdp->tsu_addr == NULL) { + ret = -ENOMEM; + dev_err(&pdev->dev, "TSU ioremap failed.\n"); + goto out_release; + } mdp->port = devno % 2; ndev->features = NETIF_F_HW_VLAN_FILTER; } -- cgit v1.2.2 From fa90b077d72b4ea92706e86fdff7b5dca294caa3 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 20 Mar 2013 02:21:48 +0000 Subject: lpc_eth: fix error return code in lpc_eth_drv_probe() Fix to return a negative error code from the error handling case instead of 0, as returned elsewhere in this function. Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller --- drivers/net/ethernet/nxp/lpc_eth.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/nxp/lpc_eth.c b/drivers/net/ethernet/nxp/lpc_eth.c index c4122c86f829..efa29b712d5f 100644 --- a/drivers/net/ethernet/nxp/lpc_eth.c +++ b/drivers/net/ethernet/nxp/lpc_eth.c @@ -1472,7 +1472,8 @@ static int lpc_eth_drv_probe(struct platform_device *pdev) } platform_set_drvdata(pdev, ndev); - if (lpc_mii_init(pldat) != 0) + ret = lpc_mii_init(pldat); + if (ret) goto err_out_unregister_netdev; netdev_info(ndev, "LPC mac at 0x%08x irq %d\n", -- cgit v1.2.2 From da2191e31409d1058dcbed44e8f53e39a40e86b3 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 20 Mar 2013 12:31:07 -0300 Subject: net: fec: Define indexes as 'unsigned int' Fix the following warnings that happen when building with W=1 option: drivers/net/ethernet/freescale/fec.c: In function 'fec_enet_free_buffers': drivers/net/ethernet/freescale/fec.c:1337:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] drivers/net/ethernet/freescale/fec.c: In function 'fec_enet_alloc_buffers': drivers/net/ethernet/freescale/fec.c:1361:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] drivers/net/ethernet/freescale/fec.c: In function 'fec_enet_init': drivers/net/ethernet/freescale/fec.c:1631:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] Signed-off-by: Fabio Estevam Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fec.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c index e3f39372ce25..911d0253dbb2 100644 --- a/drivers/net/ethernet/freescale/fec.c +++ b/drivers/net/ethernet/freescale/fec.c @@ -1332,7 +1332,7 @@ static int fec_enet_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd) static void fec_enet_free_buffers(struct net_device *ndev) { struct fec_enet_private *fep = netdev_priv(ndev); - int i; + unsigned int i; struct sk_buff *skb; struct bufdesc *bdp; @@ -1356,7 +1356,7 @@ static void fec_enet_free_buffers(struct net_device *ndev) static int fec_enet_alloc_buffers(struct net_device *ndev) { struct fec_enet_private *fep = netdev_priv(ndev); - int i; + unsigned int i; struct sk_buff *skb; struct bufdesc *bdp; @@ -1598,7 +1598,7 @@ static int fec_enet_init(struct net_device *ndev) struct fec_enet_private *fep = netdev_priv(ndev); struct bufdesc *cbd_base; struct bufdesc *bdp; - int i; + unsigned int i; /* Allocate memory for buffer descriptors. */ cbd_base = dma_alloc_coherent(NULL, PAGE_SIZE, &fep->bd_dma, -- cgit v1.2.2 From 9d73adf431e093b23fb4990f1ade11283cb67a98 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 20 Mar 2013 08:19:32 +0000 Subject: fec: Fix the build as module Since commit ff43da86c69 (NET: FEC: dynamtic check DMA desc buff type) the following build error happens when CONFIG_FEC=m ERROR: "fec_ptp_init" [drivers/net/ethernet/freescale/fec.ko] undefined! ERROR: "fec_ptp_ioctl" [drivers/net/ethernet/freescale/fec.ko] undefined! ERROR: "fec_ptp_start_cyclecounter" [drivers/net/ethernet/freescale/fec.ko] undefined! Fix it by exporting the required fec_ptp symbols. Reported-by: Uwe Kleine-Koenig Signed-off-by: Fabio Estevam Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fec_ptp.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/freescale/fec_ptp.c b/drivers/net/ethernet/freescale/fec_ptp.c index 1f17ca0f2201..0d8df400a479 100644 --- a/drivers/net/ethernet/freescale/fec_ptp.c +++ b/drivers/net/ethernet/freescale/fec_ptp.c @@ -128,6 +128,7 @@ void fec_ptp_start_cyclecounter(struct net_device *ndev) spin_unlock_irqrestore(&fep->tmreg_lock, flags); } +EXPORT_SYMBOL(fec_ptp_start_cyclecounter); /** * fec_ptp_adjfreq - adjust ptp cycle frequency @@ -318,6 +319,7 @@ int fec_ptp_ioctl(struct net_device *ndev, struct ifreq *ifr, int cmd) return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ? -EFAULT : 0; } +EXPORT_SYMBOL(fec_ptp_ioctl); /** * fec_time_keep - call timecounter_read every second to avoid timer overrun @@ -383,3 +385,4 @@ void fec_ptp_init(struct net_device *ndev, struct platform_device *pdev) pr_info("registered PHC device on %s\n", ndev->name); } } +EXPORT_SYMBOL(fec_ptp_init); -- cgit v1.2.2 From cb0e51d80694fc9964436be1a1a15275e991cb1e Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 20 Mar 2013 21:31:42 +0000 Subject: lantiq_etop: use free_netdev(netdev) instead of kfree() Freeing netdev without free_netdev() leads to net, tx leaks. And it may lead to dereferencing freed pointer. Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller --- drivers/net/ethernet/lantiq_etop.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/lantiq_etop.c b/drivers/net/ethernet/lantiq_etop.c index 6a2127489af7..bfdb06860397 100644 --- a/drivers/net/ethernet/lantiq_etop.c +++ b/drivers/net/ethernet/lantiq_etop.c @@ -769,7 +769,7 @@ ltq_etop_probe(struct platform_device *pdev) return 0; err_free: - kfree(dev); + free_netdev(dev); err_out: return err; } -- cgit v1.2.2 From ce16294fda230c787ce5c35f61b2f80d14d70a72 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Lothar=20Wa=C3=9Fmann?= Date: Thu, 21 Mar 2013 02:20:11 +0000 Subject: net: ethernet: cpsw: fix erroneous condition in error check MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The error check in cpsw_probe_dt() has an '&&' where an '||' is meant to be. This causes a NULL pointer dereference when incomplet DT data is passed to the driver ('phy_id' property for cpsw_emac1 missing). Signed-off-by: Lothar Waßmann Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/cpsw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index 75c48558e6fd..df32a090d08e 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -1364,7 +1364,7 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data, struct platform_device *mdio; parp = of_get_property(slave_node, "phy_id", &lenp); - if ((parp == NULL) && (lenp != (sizeof(void *) * 2))) { + if ((parp == NULL) || (lenp != (sizeof(void *) * 2))) { pr_err("Missing slave[%d] phy_id property\n", i); ret = -EINVAL; goto error_ret; -- cgit v1.2.2 From c101c81b5293cdcb616ed4948d0c4a4cfd1f481a Mon Sep 17 00:00:00 2001 From: Moshe Lazer Date: Thu, 21 Mar 2013 05:55:51 +0000 Subject: net/mlx4_core: Fix wrong mask applied on EQ numbers in the wrapper Currently the mask is wrongly set in the MAP_EQ wrapper, fix that. Without the fix any EQ number above 511 is mapped to one below 511. Signed-off-by: Moshe Lazer Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/eq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlx4/eq.c b/drivers/net/ethernet/mellanox/mlx4/eq.c index 251ae2f93116..8e3123a1df88 100644 --- a/drivers/net/ethernet/mellanox/mlx4/eq.c +++ b/drivers/net/ethernet/mellanox/mlx4/eq.c @@ -771,7 +771,7 @@ int mlx4_MAP_EQ_wrapper(struct mlx4_dev *dev, int slave, struct mlx4_slave_event_eq_info *event_eq = priv->mfunc.master.slave_state[slave].event_eq; u32 in_modifier = vhcr->in_modifier; - u32 eqn = in_modifier & 0x1FF; + u32 eqn = in_modifier & 0x3FF; u64 in_param = vhcr->in_param; int err = 0; int i; -- cgit v1.2.2 From 80cb0021163cb55b14c7c054073f89d63a2e1e40 Mon Sep 17 00:00:00 2001 From: Hadar Hen Zion Date: Thu, 21 Mar 2013 05:55:52 +0000 Subject: net/mlx4_core: Fix wrong order of flow steering resources removal On the resource tracker cleanup flow, the DMFS rules must be deleted before we destroy the QPs, else the HW may attempt doing packet steering to non existent QPs. Signed-off-by: Hadar Hen Zion Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/resource_tracker.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c index 2995687f1aee..0d1d9679179c 100644 --- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c +++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c @@ -3806,6 +3806,7 @@ void mlx4_delete_all_resources_for_slave(struct mlx4_dev *dev, int slave) mutex_lock(&priv->mfunc.master.res_tracker.slave_list[slave].mutex); /*VLAN*/ rem_slave_macs(dev, slave); + rem_slave_fs_rule(dev, slave); rem_slave_qps(dev, slave); rem_slave_srqs(dev, slave); rem_slave_cqs(dev, slave); @@ -3814,6 +3815,5 @@ void mlx4_delete_all_resources_for_slave(struct mlx4_dev *dev, int slave) rem_slave_mtts(dev, slave); rem_slave_counters(dev, slave); rem_slave_xrcdns(dev, slave); - rem_slave_fs_rule(dev, slave); mutex_unlock(&priv->mfunc.master.res_tracker.slave_list[slave].mutex); } -- cgit v1.2.2 From 6efb5fac4d6b617972ab5a10bf67e0eba2c2d212 Mon Sep 17 00:00:00 2001 From: Hadar Hen Zion Date: Thu, 21 Mar 2013 05:55:53 +0000 Subject: net/mlx4_en: Remove ethtool flow steering rules before releasing QPs Fix the ethtool flow steering rules cleanup to be carried out before releasing the RX QPs. Signed-off-by: Hadar Hen Zion Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 995d4b6d5c1e..f278b10ef714 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -1637,6 +1637,17 @@ void mlx4_en_stop_port(struct net_device *dev, int detach) /* Flush multicast filter */ mlx4_SET_MCAST_FLTR(mdev->dev, priv->port, 0, 1, MLX4_MCAST_CONFIG); + /* Remove flow steering rules for the port*/ + if (mdev->dev->caps.steering_mode == + MLX4_STEERING_MODE_DEVICE_MANAGED) { + ASSERT_RTNL(); + list_for_each_entry_safe(flow, tmp_flow, + &priv->ethtool_list, list) { + mlx4_flow_detach(mdev->dev, flow->id); + list_del(&flow->list); + } + } + mlx4_en_destroy_drop_qp(priv); /* Free TX Rings */ @@ -1657,17 +1668,6 @@ void mlx4_en_stop_port(struct net_device *dev, int detach) if (!(mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAGS2_REASSIGN_MAC_EN)) mdev->mac_removed[priv->port] = 1; - /* Remove flow steering rules for the port*/ - if (mdev->dev->caps.steering_mode == - MLX4_STEERING_MODE_DEVICE_MANAGED) { - ASSERT_RTNL(); - list_for_each_entry_safe(flow, tmp_flow, - &priv->ethtool_list, list) { - mlx4_flow_detach(mdev->dev, flow->id); - list_del(&flow->list); - } - } - /* Free RX Rings */ for (i = 0; i < priv->rx_ring_num; i++) { mlx4_en_deactivate_rx_ring(priv, &priv->rx_ring[i]); -- cgit v1.2.2 From 1e3f7b324e46b772dec1bb6dd96ae745fc085401 Mon Sep 17 00:00:00 2001 From: Hadar Hen Zion Date: Thu, 21 Mar 2013 05:55:54 +0000 Subject: net/mlx4_core: Always use 64 bit resource ID when doing lookup One of the resource tracker code paths was wrongly using int and not u64 for resource tracking IDs, fix it. Signed-off-by: Hadar Hen Zion Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/resource_tracker.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c index 0d1d9679179c..b0ccdb55ca46 100644 --- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c +++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c @@ -355,7 +355,7 @@ static int mpt_mask(struct mlx4_dev *dev) return dev->caps.num_mpts - 1; } -static void *find_res(struct mlx4_dev *dev, int res_id, +static void *find_res(struct mlx4_dev *dev, u64 res_id, enum mlx4_resource type) { struct mlx4_priv *priv = mlx4_priv(dev); -- cgit v1.2.2 From 2c473ae7e5826c108e52f4a9d75425fd4c6f9ed1 Mon Sep 17 00:00:00 2001 From: Hadar Hen Zion Date: Thu, 21 Mar 2013 05:55:55 +0000 Subject: net/mlx4_core: Disallow releasing VF QPs which have steering rules VF QPs must not be released when they have steering rules attached to them. For that end, introduce a reference count field to the QP object in the SRIOV resource tracker which is incremented/decremented when steering rules are attached/detached to it. QPs can be released by VF only when their ref count is zero. Signed-off-by: Hadar Hen Zion Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- .../net/ethernet/mellanox/mlx4/resource_tracker.c | 41 +++++++++++++++++----- 1 file changed, 33 insertions(+), 8 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c index b0ccdb55ca46..1391b52f443a 100644 --- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c +++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c @@ -99,6 +99,7 @@ struct res_qp { struct list_head mcg_list; spinlock_t mcg_spl; int local_qpn; + atomic_t ref_count; }; enum res_mtt_states { @@ -197,6 +198,7 @@ enum res_fs_rule_states { struct res_fs_rule { struct res_common com; + int qpn; }; static void *res_tracker_lookup(struct rb_root *root, u64 res_id) @@ -447,6 +449,7 @@ static struct res_common *alloc_qp_tr(int id) ret->local_qpn = id; INIT_LIST_HEAD(&ret->mcg_list); spin_lock_init(&ret->mcg_spl); + atomic_set(&ret->ref_count, 0); return &ret->com; } @@ -554,7 +557,7 @@ static struct res_common *alloc_xrcdn_tr(int id) return &ret->com; } -static struct res_common *alloc_fs_rule_tr(u64 id) +static struct res_common *alloc_fs_rule_tr(u64 id, int qpn) { struct res_fs_rule *ret; @@ -564,7 +567,7 @@ static struct res_common *alloc_fs_rule_tr(u64 id) ret->com.res_id = id; ret->com.state = RES_FS_RULE_ALLOCATED; - + ret->qpn = qpn; return &ret->com; } @@ -602,7 +605,7 @@ static struct res_common *alloc_tr(u64 id, enum mlx4_resource type, int slave, ret = alloc_xrcdn_tr(id); break; case RES_FS_RULE: - ret = alloc_fs_rule_tr(id); + ret = alloc_fs_rule_tr(id, extra); break; default: return NULL; @@ -671,10 +674,14 @@ undo: static int remove_qp_ok(struct res_qp *res) { - if (res->com.state == RES_QP_BUSY) + if (res->com.state == RES_QP_BUSY || atomic_read(&res->ref_count) || + !list_empty(&res->mcg_list)) { + pr_err("resource tracker: fail to remove qp, state %d, ref_count %d\n", + res->com.state, atomic_read(&res->ref_count)); return -EBUSY; - else if (res->com.state != RES_QP_RESERVED) + } else if (res->com.state != RES_QP_RESERVED) { return -EPERM; + } return 0; } @@ -3124,6 +3131,7 @@ int mlx4_QP_FLOW_STEERING_ATTACH_wrapper(struct mlx4_dev *dev, int slave, struct list_head *rlist = &tracker->slave_list[slave].res_list[RES_MAC]; int err; int qpn; + struct res_qp *rqp; struct mlx4_net_trans_rule_hw_ctrl *ctrl; struct _rule_hw *rule_header; int header_id; @@ -3134,7 +3142,7 @@ int mlx4_QP_FLOW_STEERING_ATTACH_wrapper(struct mlx4_dev *dev, int slave, ctrl = (struct mlx4_net_trans_rule_hw_ctrl *)inbox->buf; qpn = be32_to_cpu(ctrl->qpn) & 0xffffff; - err = get_res(dev, slave, qpn, RES_QP, NULL); + err = get_res(dev, slave, qpn, RES_QP, &rqp); if (err) { pr_err("Steering rule with qpn 0x%x rejected.\n", qpn); return err; @@ -3175,14 +3183,16 @@ int mlx4_QP_FLOW_STEERING_ATTACH_wrapper(struct mlx4_dev *dev, int slave, if (err) goto err_put; - err = add_res_range(dev, slave, vhcr->out_param, 1, RES_FS_RULE, 0); + err = add_res_range(dev, slave, vhcr->out_param, 1, RES_FS_RULE, qpn); if (err) { mlx4_err(dev, "Fail to add flow steering resources.\n "); /* detach rule*/ mlx4_cmd(dev, vhcr->out_param, 0, 0, MLX4_QP_FLOW_STEERING_DETACH, MLX4_CMD_TIME_CLASS_A, MLX4_CMD_NATIVE); + goto err_put; } + atomic_inc(&rqp->ref_count); err_put: put_res(dev, slave, qpn, RES_QP); return err; @@ -3195,20 +3205,35 @@ int mlx4_QP_FLOW_STEERING_DETACH_wrapper(struct mlx4_dev *dev, int slave, struct mlx4_cmd_info *cmd) { int err; + struct res_qp *rqp; + struct res_fs_rule *rrule; if (dev->caps.steering_mode != MLX4_STEERING_MODE_DEVICE_MANAGED) return -EOPNOTSUPP; + err = get_res(dev, slave, vhcr->in_param, RES_FS_RULE, &rrule); + if (err) + return err; + /* Release the rule form busy state before removal */ + put_res(dev, slave, vhcr->in_param, RES_FS_RULE); + err = get_res(dev, slave, rrule->qpn, RES_QP, &rqp); + if (err) + return err; + err = rem_res_range(dev, slave, vhcr->in_param, 1, RES_FS_RULE, 0); if (err) { mlx4_err(dev, "Fail to remove flow steering resources.\n "); - return err; + goto out; } err = mlx4_cmd(dev, vhcr->in_param, 0, 0, MLX4_QP_FLOW_STEERING_DETACH, MLX4_CMD_TIME_CLASS_A, MLX4_CMD_NATIVE); + if (!err) + atomic_dec(&rqp->ref_count); +out: + put_res(dev, slave, rrule->qpn, RES_QP); return err; } -- cgit v1.2.2 From 8fe7f99a9e11a43183bc27420309ae105e1fec1a Mon Sep 17 00:00:00 2001 From: Kumar Amit Mehta Date: Sat, 23 Mar 2013 20:10:25 +0000 Subject: bnx2x: fix assignment of signed expression to unsigned variable fix for incorrect assignment of signed expression to unsigned variable. Signed-off-by: Kumar Amit Mehta Acked-by: Dmitry Kravkov Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c index 568205436a15..91ecd6a00d05 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c @@ -2139,12 +2139,12 @@ static u8 bnx2x_dcbnl_get_cap(struct net_device *netdev, int capid, u8 *cap) break; default: BNX2X_ERR("Non valid capability ID\n"); - rval = -EINVAL; + rval = 1; break; } } else { DP(BNX2X_MSG_DCB, "DCB disabled\n"); - rval = -EINVAL; + rval = 1; } DP(BNX2X_MSG_DCB, "capid %d:%x\n", capid, *cap); @@ -2170,12 +2170,12 @@ static int bnx2x_dcbnl_get_numtcs(struct net_device *netdev, int tcid, u8 *num) break; default: BNX2X_ERR("Non valid TC-ID\n"); - rval = -EINVAL; + rval = 1; break; } } else { DP(BNX2X_MSG_DCB, "DCB disabled\n"); - rval = -EINVAL; + rval = 1; } return rval; @@ -2188,7 +2188,7 @@ static int bnx2x_dcbnl_set_numtcs(struct net_device *netdev, int tcid, u8 num) return -EINVAL; } -static u8 bnx2x_dcbnl_get_pfc_state(struct net_device *netdev) +static u8 bnx2x_dcbnl_get_pfc_state(struct net_device *netdev) { struct bnx2x *bp = netdev_priv(netdev); DP(BNX2X_MSG_DCB, "state = %d\n", bp->dcbx_local_feat.pfc.enabled); @@ -2390,12 +2390,12 @@ static u8 bnx2x_dcbnl_get_featcfg(struct net_device *netdev, int featid, break; default: BNX2X_ERR("Non valid featrue-ID\n"); - rval = -EINVAL; + rval = 1; break; } } else { DP(BNX2X_MSG_DCB, "DCB disabled\n"); - rval = -EINVAL; + rval = 1; } return rval; @@ -2431,12 +2431,12 @@ static u8 bnx2x_dcbnl_set_featcfg(struct net_device *netdev, int featid, break; default: BNX2X_ERR("Non valid featrue-ID\n"); - rval = -EINVAL; + rval = 1; break; } } else { DP(BNX2X_MSG_DCB, "dcbnl call not valid\n"); - rval = -EINVAL; + rval = 1; } return rval; -- cgit v1.2.2 From a1f6c6b147cc5e83ec36dab8370bd5ec5fa1def6 Mon Sep 17 00:00:00 2001 From: xunleer Date: Tue, 5 Mar 2013 07:44:20 +0000 Subject: ixgbevf: don't release the soft entries When the ixgbevf driver is opened the request to allocate MSIX irq vectors may fail. In that case the driver will call ixgbevf_down() which will call ixgbevf_irq_disable() to clear the HW interrupt registers and calls synchronize_irq() using the msix_entries pointer in the adapter structure. However, when the function to request the MSIX irq vectors failed it had already freed the msix_entries which causes an OOPs from using the NULL pointer in synchronize_irq(). The calls to pci_disable_msix() and to free the msix_entries memory should not occur if device open fails. Instead they should be called during device driver removal to balance with the call to pci_enable_msix() and the call to allocate msix_entries memory during the device probe and driver load. Signed-off-by: Li Xun Signed-off-by: Greg Rose Tested-by: Sibai Li Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 24 +++++++++++++++++++---- 1 file changed, 20 insertions(+), 4 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c index c3db6cd69b68..2b6cb5ca48ee 100644 --- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c +++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c @@ -944,9 +944,17 @@ free_queue_irqs: free_irq(adapter->msix_entries[vector].vector, adapter->q_vector[vector]); } - pci_disable_msix(adapter->pdev); - kfree(adapter->msix_entries); - adapter->msix_entries = NULL; + /* This failure is non-recoverable - it indicates the system is + * out of MSIX vector resources and the VF driver cannot run + * without them. Set the number of msix vectors to zero + * indicating that not enough can be allocated. The error + * will be returned to the user indicating device open failed. + * Any further attempts to force the driver to open will also + * fail. The only way to recover is to unload the driver and + * reload it again. If the system has recovered some MSIX + * vectors then it may succeed. + */ + adapter->num_msix_vectors = 0; return err; } @@ -2572,6 +2580,15 @@ static int ixgbevf_open(struct net_device *netdev) struct ixgbe_hw *hw = &adapter->hw; int err; + /* A previous failure to open the device because of a lack of + * available MSIX vector resources may have reset the number + * of msix vectors variable to zero. The only way to recover + * is to unload/reload the driver and hope that the system has + * been able to recover some MSIX vector resources. + */ + if (!adapter->num_msix_vectors) + return -ENOMEM; + /* disallow open during test */ if (test_bit(__IXGBEVF_TESTING, &adapter->state)) return -EBUSY; @@ -2628,7 +2645,6 @@ static int ixgbevf_open(struct net_device *netdev) err_req_irq: ixgbevf_down(adapter); - ixgbevf_free_irq(adapter); err_setup_rx: ixgbevf_free_all_rx_resources(adapter); err_setup_tx: -- cgit v1.2.2 From 22c12752d183f39aa8e2cc884cfcb23c0cb6d98d Mon Sep 17 00:00:00 2001 From: Lior Levy Date: Tue, 12 Mar 2013 15:49:32 +0000 Subject: igb: fix i350 anti spoofing config Fix a problem in i350 where anti spoofing configuration was written into a wrong register. Signed-off-by: Lior Levy Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igb/e1000_82575.c | 33 ++++++++++++++++------------ 1 file changed, 19 insertions(+), 14 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c index b64542acfa34..12b1d8480808 100644 --- a/drivers/net/ethernet/intel/igb/e1000_82575.c +++ b/drivers/net/ethernet/intel/igb/e1000_82575.c @@ -1818,27 +1818,32 @@ out: **/ void igb_vmdq_set_anti_spoofing_pf(struct e1000_hw *hw, bool enable, int pf) { - u32 dtxswc; + u32 reg_val, reg_offset; switch (hw->mac.type) { case e1000_82576: + reg_offset = E1000_DTXSWC; + break; case e1000_i350: - dtxswc = rd32(E1000_DTXSWC); - if (enable) { - dtxswc |= (E1000_DTXSWC_MAC_SPOOF_MASK | - E1000_DTXSWC_VLAN_SPOOF_MASK); - /* The PF can spoof - it has to in order to - * support emulation mode NICs */ - dtxswc ^= (1 << pf | 1 << (pf + MAX_NUM_VFS)); - } else { - dtxswc &= ~(E1000_DTXSWC_MAC_SPOOF_MASK | - E1000_DTXSWC_VLAN_SPOOF_MASK); - } - wr32(E1000_DTXSWC, dtxswc); + reg_offset = E1000_TXSWC; break; default: - break; + return; + } + + reg_val = rd32(reg_offset); + if (enable) { + reg_val |= (E1000_DTXSWC_MAC_SPOOF_MASK | + E1000_DTXSWC_VLAN_SPOOF_MASK); + /* The PF can spoof - it has to in order to + * support emulation mode NICs + */ + reg_val ^= (1 << pf | 1 << (pf + MAX_NUM_VFS)); + } else { + reg_val &= ~(E1000_DTXSWC_MAC_SPOOF_MASK | + E1000_DTXSWC_VLAN_SPOOF_MASK); } + wr32(reg_offset, reg_val); } /** -- cgit v1.2.2 From d0f63acc2ff354a525f7bc7ba90e81f49b6c2ef8 Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Wed, 13 Mar 2013 15:50:24 +0000 Subject: igb: Fix null pointer dereference The max_vfs= option has always been self limiting to the number of VFs supported by the device. fa44f2f1 added SR-IOV configuration via sysfs, but in the process broke this self correction factor. The failing path is: igb_probe igb_sw_init if (max_vfs > 7) { adapter->vfs_allocated_count = 7; ... igb_probe_vfs igb_enable_sriov(, max_vfs) if (num_vfs > 7) { err = -EPERM; ... This leaves vfs_allocated_count = 7 and vf_data = NULL, so we bomb out when igb_probe finally calls igb_reset. It seems like a really bad idea, and somewhat pointless, to set vfs_allocated_count separate from vf_data, but limiting max_vfs is enough to avoid the null pointer. Signed-off-by: Alex Williamson Acked-by: Greg Rose Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igb/igb_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index 4dbd62968c7a..2ae888678b23 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -2652,7 +2652,7 @@ static int igb_sw_init(struct igb_adapter *adapter) if (max_vfs > 7) { dev_warn(&pdev->dev, "Maximum of 7 VFs per PF, using max\n"); - adapter->vfs_allocated_count = 7; + max_vfs = adapter->vfs_allocated_count = 7; } else adapter->vfs_allocated_count = max_vfs; if (adapter->vfs_allocated_count) -- cgit v1.2.2 From d5e51a10d21761faaf069cac6f1c0311cf332820 Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Wed, 13 Mar 2013 15:50:29 +0000 Subject: igb: SR-IOV init reordering igb is ineffective at setting a lower total VFs because: int pci_sriov_set_totalvfs(struct pci_dev *dev, u16 numvfs) { ... /* Shouldn't change if VFs already enabled */ if (dev->sriov->ctrl & PCI_SRIOV_CTRL_VFE) return -EBUSY; Swap init ordering. Signed-off-by: Alex Williamson Acked-by: Greg Rose Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igb/igb_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index 2ae888678b23..8496adfc6a68 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -2542,8 +2542,8 @@ static void igb_probe_vfs(struct igb_adapter *adapter) if ((hw->mac.type == e1000_i210) || (hw->mac.type == e1000_i211)) return; - igb_enable_sriov(pdev, max_vfs); pci_sriov_set_totalvfs(pdev, 7); + igb_enable_sriov(pdev, max_vfs); #endif /* CONFIG_PCI_IOV */ } -- cgit v1.2.2 From 05ec29e8fa9b6ec8d4ad5d2f6d5fc5467c7970bc Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 20 Mar 2013 09:06:29 +0000 Subject: igb: make sensor info static Trivial sparse warning. Signed-off-by: Stephen Hemminger Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igb/igb_hwmon.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/intel/igb/igb_hwmon.c b/drivers/net/ethernet/intel/igb/igb_hwmon.c index 4623502054d5..0478a1abe541 100644 --- a/drivers/net/ethernet/intel/igb/igb_hwmon.c +++ b/drivers/net/ethernet/intel/igb/igb_hwmon.c @@ -39,7 +39,7 @@ #include #ifdef CONFIG_IGB_HWMON -struct i2c_board_info i350_sensor_info = { +static struct i2c_board_info i350_sensor_info = { I2C_BOARD_INFO("i350bb", (0Xf8 >> 1)), }; -- cgit v1.2.2 From 75517d92119a3cd364f618ee962055b3ded8c396 Mon Sep 17 00:00:00 2001 From: Jiri Benc Date: Wed, 20 Mar 2013 09:06:34 +0000 Subject: igb: fix PHC stopping on max freq For 82576 MAC type, max_adj is reported as 1000000000 ppb. However, if this value is passed to igb_ptp_adjfreq_82576, incvalue overflows out of INCVALUE_82576_MASK, resulting in setting of zero TIMINCA.incvalue, stopping the PHC (instead of going at twice the nominal speed). Fix the advertised max_adj value to the largest value hardware can handle. As there is no min_adj value available (-max_adj is used instead), this will also prevent stopping the clock intentionally. It's probably not a big deal, other igb MAC types don't support stopping the clock, either. Signed-off-by: Jiri Benc Acked-by: Matthew Vick Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igb/igb_ptp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/intel/igb/igb_ptp.c b/drivers/net/ethernet/intel/igb/igb_ptp.c index 0987822359f0..0a237507ee85 100644 --- a/drivers/net/ethernet/intel/igb/igb_ptp.c +++ b/drivers/net/ethernet/intel/igb/igb_ptp.c @@ -740,7 +740,7 @@ void igb_ptp_init(struct igb_adapter *adapter) case e1000_82576: snprintf(adapter->ptp_caps.name, 16, "%pm", netdev->dev_addr); adapter->ptp_caps.owner = THIS_MODULE; - adapter->ptp_caps.max_adj = 1000000000; + adapter->ptp_caps.max_adj = 999999881; adapter->ptp_caps.n_ext_ts = 0; adapter->ptp_caps.pps = 0; adapter->ptp_caps.adjfreq = igb_ptp_adjfreq_82576; -- cgit v1.2.2 From 76a0e68129d7d24eb995a6871ab47081bbfa0acc Mon Sep 17 00:00:00 2001 From: Veaceslav Falico Date: Mon, 25 Mar 2013 22:26:21 +0000 Subject: pch_gbe: fix ip_summed checksum reporting on rx skb->ip_summed should be CHECKSUM_UNNECESSARY when the driver reports that checksums were correct and CHECKSUM_NONE in any other case. They're currently placed vice versa, which breaks the forwarding scenario. Fix it by placing them as described above. Signed-off-by: Veaceslav Falico Signed-off-by: David S. Miller --- drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c index 39ab4d09faaa..73ce7dd6b954 100644 --- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c +++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c @@ -1726,9 +1726,9 @@ pch_gbe_clean_rx(struct pch_gbe_adapter *adapter, skb->protocol = eth_type_trans(skb, netdev); if (tcp_ip_status & PCH_GBE_RXD_ACC_STAT_TCPIPOK) - skb->ip_summed = CHECKSUM_NONE; - else skb->ip_summed = CHECKSUM_UNNECESSARY; + else + skb->ip_summed = CHECKSUM_NONE; napi_gro_receive(&adapter->napi, skb); (*work_done)++; -- cgit v1.2.2