From 19ae1b3fb99c2d5a5a7540c296c4cb4df3e7f552 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Sat, 20 Sep 2014 19:50:27 -0400 Subject: fm10k: Add support for PCI power management and error handling Add PCI power management and error handling to allow the device to support suspend/resume and recovery of any PCIe errors. The fm10k devices do not support wake on LAN, and there is no plan to add this as a feature. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/fm10k/fm10k_pci.c | 221 +++++++++++++++++++++++++++ 1 file changed, 221 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_pci.c b/drivers/net/ethernet/intel/fm10k/fm10k_pci.c index 229c7e491251..b54c9e18cbdf 100644 --- a/drivers/net/ethernet/intel/fm10k/fm10k_pci.c +++ b/drivers/net/ethernet/intel/fm10k/fm10k_pci.c @@ -19,6 +19,7 @@ */ #include +#include #include "fm10k.h" @@ -1535,6 +1536,8 @@ static int fm10k_probe(struct pci_dev *pdev, goto err_pci_reg; } + pci_enable_pcie_error_reporting(pdev); + pci_set_master(pdev); pci_save_state(pdev); @@ -1661,14 +1664,232 @@ static void fm10k_remove(struct pci_dev *pdev) pci_release_selected_regions(pdev, pci_select_bars(pdev, IORESOURCE_MEM)); + pci_disable_pcie_error_reporting(pdev); + pci_disable_device(pdev); } +#ifdef CONFIG_PM +/** + * fm10k_resume - Restore device to pre-sleep state + * @pdev: PCI device information struct + * + * fm10k_resume is called after the system has powered back up from a sleep + * state and is ready to resume operation. This function is meant to restore + * the device back to its pre-sleep state. + **/ +static int fm10k_resume(struct pci_dev *pdev) +{ + struct fm10k_intfc *interface = pci_get_drvdata(pdev); + struct net_device *netdev = interface->netdev; + struct fm10k_hw *hw = &interface->hw; + u32 err; + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + + /* pci_restore_state clears dev->state_saved so call + * pci_save_state to restore it. + */ + pci_save_state(pdev); + + err = pci_enable_device_mem(pdev); + if (err) { + dev_err(&pdev->dev, "Cannot enable PCI device from suspend\n"); + return err; + } + pci_set_master(pdev); + + pci_wake_from_d3(pdev, false); + + /* refresh hw_addr in case it was dropped */ + hw->hw_addr = interface->uc_addr; + + /* reset hardware to known state */ + err = hw->mac.ops.init_hw(&interface->hw); + if (err) + return err; + + /* reset statistics starting values */ + hw->mac.ops.rebind_hw_stats(hw, &interface->stats); + + rtnl_lock(); + + err = fm10k_init_queueing_scheme(interface); + if (!err) { + fm10k_mbx_request_irq(interface); + if (netif_running(netdev)) + err = fm10k_open(netdev); + } + + rtnl_unlock(); + + if (err) + return err; + + netif_device_attach(netdev); + + return 0; +} + +/** + * fm10k_suspend - Prepare the device for a system sleep state + * @pdev: PCI device information struct + * + * fm10k_suspend is meant to shutdown the device prior to the system entering + * a sleep state. The fm10k hardware does not support wake on lan so the + * driver simply needs to shut down the device so it is in a low power state. + **/ +static int fm10k_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct fm10k_intfc *interface = pci_get_drvdata(pdev); + struct net_device *netdev = interface->netdev; + int err = 0; + + netif_device_detach(netdev); + + rtnl_lock(); + + if (netif_running(netdev)) + fm10k_close(netdev); + + fm10k_mbx_free_irq(interface); + + fm10k_clear_queueing_scheme(interface); + + rtnl_unlock(); + + err = pci_save_state(pdev); + if (err) + return err; + + pci_disable_device(pdev); + pci_wake_from_d3(pdev, false); + pci_set_power_state(pdev, PCI_D3hot); + + return 0; +} + +#endif /* CONFIG_PM */ +/** + * fm10k_io_error_detected - called when PCI error is detected + * @pdev: Pointer to PCI device + * @state: The current pci connection state + * + * This function is called after a PCI bus error affecting + * this device has been detected. + */ +static pci_ers_result_t fm10k_io_error_detected(struct pci_dev *pdev, + pci_channel_state_t state) +{ + struct fm10k_intfc *interface = pci_get_drvdata(pdev); + struct net_device *netdev = interface->netdev; + + netif_device_detach(netdev); + + if (state == pci_channel_io_perm_failure) + return PCI_ERS_RESULT_DISCONNECT; + + if (netif_running(netdev)) + fm10k_close(netdev); + + fm10k_mbx_free_irq(interface); + + pci_disable_device(pdev); + + /* Request a slot reset. */ + return PCI_ERS_RESULT_NEED_RESET; +} + +/** + * fm10k_io_slot_reset - called after the pci bus has been reset. + * @pdev: Pointer to PCI device + * + * Restart the card from scratch, as if from a cold-boot. + */ +static pci_ers_result_t fm10k_io_slot_reset(struct pci_dev *pdev) +{ + struct fm10k_intfc *interface = pci_get_drvdata(pdev); + pci_ers_result_t result; + + if (pci_enable_device_mem(pdev)) { + dev_err(&pdev->dev, + "Cannot re-enable PCI device after reset.\n"); + result = PCI_ERS_RESULT_DISCONNECT; + } else { + pci_set_master(pdev); + pci_restore_state(pdev); + + /* After second error pci->state_saved is false, this + * resets it so EEH doesn't break. + */ + pci_save_state(pdev); + + pci_wake_from_d3(pdev, false); + + /* refresh hw_addr in case it was dropped */ + interface->hw.hw_addr = interface->uc_addr; + + interface->flags |= FM10K_FLAG_RESET_REQUESTED; + fm10k_service_event_schedule(interface); + + result = PCI_ERS_RESULT_RECOVERED; + } + + pci_cleanup_aer_uncorrect_error_status(pdev); + + return result; +} + +/** + * fm10k_io_resume - called when traffic can start flowing again. + * @pdev: Pointer to PCI device + * + * This callback is called when the error recovery driver tells us that + * its OK to resume normal operation. + */ +static void fm10k_io_resume(struct pci_dev *pdev) +{ + struct fm10k_intfc *interface = pci_get_drvdata(pdev); + struct net_device *netdev = interface->netdev; + struct fm10k_hw *hw = &interface->hw; + int err = 0; + + /* reset hardware to known state */ + hw->mac.ops.init_hw(&interface->hw); + + /* reset statistics starting values */ + hw->mac.ops.rebind_hw_stats(hw, &interface->stats); + + /* reassociate interrupts */ + fm10k_mbx_request_irq(interface); + + if (netif_running(netdev)) + err = fm10k_open(netdev); + + /* final check of hardware state before registering the interface */ + err = err ? : fm10k_hw_ready(interface); + + if (!err) + netif_device_attach(netdev); +} + +static const struct pci_error_handlers fm10k_err_handler = { + .error_detected = fm10k_io_error_detected, + .slot_reset = fm10k_io_slot_reset, + .resume = fm10k_io_resume, +}; + static struct pci_driver fm10k_driver = { .name = fm10k_driver_name, .id_table = fm10k_pci_tbl, .probe = fm10k_probe, .remove = fm10k_remove, +#ifdef CONFIG_PM + .suspend = fm10k_suspend, + .resume = fm10k_resume, +#endif + .err_handler = &fm10k_err_handler }; /** -- cgit v1.2.2