From 3a3b75860527a11ba5035c6aa576079245d09e2a Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Wed, 29 Sep 2010 21:38:49 +0000 Subject: e1000e: use hardware writeback batching Most e1000e parts support batching writebacks. The problem with this is that when some of the TADV or TIDV timers are not set, Tx can sit forever. This is solved in this patch with write flushes using the Flush Partial Descriptors (FPD) bit in TIDV and RDTR. This improves bus utilization and removes partial writes on e1000e, particularly from 82571 parts in S5500 chipset based machines. Only ES2LAN and 82571/2 parts are included in this optimization, to reduce testing load. Signed-off-by: Jesse Brandeburg Tested-by: Emil Tantilov Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/param.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers/net/e1000e/param.c') diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c index 34aeec13bb16..3d36911f77f3 100644 --- a/drivers/net/e1000e/param.c +++ b/drivers/net/e1000e/param.c @@ -91,7 +91,6 @@ E1000_PARAM(TxAbsIntDelay, "Transmit Absolute Interrupt Delay"); * Valid Range: 0-65535 */ E1000_PARAM(RxIntDelay, "Receive Interrupt Delay"); -#define DEFAULT_RDTR 0 #define MAX_RXDELAY 0xFFFF #define MIN_RXDELAY 0 @@ -101,7 +100,6 @@ E1000_PARAM(RxIntDelay, "Receive Interrupt Delay"); * Valid Range: 0-65535 */ E1000_PARAM(RxAbsIntDelay, "Receive Absolute Interrupt Delay"); -#define DEFAULT_RADV 8 #define MAX_RXABSDELAY 0xFFFF #define MIN_RXABSDELAY 0 -- cgit v1.2.2