From 744514249f0656e2d50bb57585241670c2d4f32b Mon Sep 17 00:00:00 2001 From: Divy Le Ray Date: Fri, 29 May 2009 12:52:44 +0000 Subject: cxgb3: Add Aeluros 2020 phy support Add support for the AEL2020 phy. Add PCI IDs of the boards using this phy. Signed-off-by: Divy Le Ray Signed-off-by: David S. Miller --- drivers/net/cxgb3/ael1002.c | 823 ++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 758 insertions(+), 65 deletions(-) (limited to 'drivers/net/cxgb3/ael1002.c') diff --git a/drivers/net/cxgb3/ael1002.c b/drivers/net/cxgb3/ael1002.c index df1f58576689..9fe008ec9ba5 100644 --- a/drivers/net/cxgb3/ael1002.c +++ b/drivers/net/cxgb3/ael1002.c @@ -44,12 +44,33 @@ enum { AEL_I2C_STAT = 0xc30c, AEL2005_GPIO_CTRL = 0xc214, AEL2005_GPIO_STAT = 0xc215, + + AEL2020_GPIO_INTR = 0xc103, /* Latch High (LH) */ + AEL2020_GPIO_CTRL = 0xc108, /* Store Clear (SC) */ + AEL2020_GPIO_STAT = 0xc10c, /* Read Only (RO) */ + AEL2020_GPIO_CFG = 0xc110, /* Read Write (RW) */ + + AEL2020_GPIO_SDA = 0, /* IN: i2c serial data */ + AEL2020_GPIO_MODDET = 1, /* IN: Module Detect */ + AEL2020_GPIO_0 = 3, /* IN: unassigned */ + AEL2020_GPIO_1 = 2, /* OUT: unassigned */ + AEL2020_GPIO_LSTAT = AEL2020_GPIO_1, /* wired to link status LED */ }; enum { edc_none, edc_sr, edc_twinax }; /* PHY module I2C device address */ -#define MODULE_DEV_ADDR 0xa0 +enum { + MODULE_DEV_ADDR = 0xa0, + SFF_DEV_ADDR = 0xa2, +}; + +/* PHY transceiver type */ +enum { + phy_transtype_unknown = 0, + phy_transtype_sfp = 3, + phy_transtype_xfp = 6, +}; #define AEL2005_MODDET_IRQ 4 @@ -86,6 +107,37 @@ static void ael100x_txon(struct cphy *phy) msleep(30); } +/* + * Read an 8-bit word from a device attached to the PHY's i2c bus. + */ +static int ael_i2c_rd(struct cphy *phy, int dev_addr, int word_addr) +{ + int i, err; + unsigned int stat, data; + + err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, AEL_I2C_CTRL, + (dev_addr << 8) | (1 << 8) | word_addr); + if (err) + return err; + + for (i = 0; i < 200; i++) { + msleep(1); + err = t3_mdio_read(phy, MDIO_MMD_PMAPMD, AEL_I2C_STAT, &stat); + if (err) + return err; + if ((stat & 3) == 1) { + err = t3_mdio_read(phy, MDIO_MMD_PMAPMD, AEL_I2C_DATA, + &data); + if (err) + return err; + return data >> 8; + } + } + CH_WARN(phy->adapter, "PHY %u i2c read of dev.addr %#x.%#x timed out\n", + phy->mdio.prtad, dev_addr, word_addr); + return -ETIMEDOUT; +} + static int ael1002_power_down(struct cphy *phy, int enable) { int err; @@ -199,6 +251,51 @@ int t3_ael1006_phy_prep(struct cphy *phy, struct adapter *adapter, return 0; } +/* + * Decode our module type. + */ +static int ael2xxx_get_module_type(struct cphy *phy, int delay_ms) +{ + int v; + + if (delay_ms) + msleep(delay_ms); + + /* see SFF-8472 for below */ + v = ael_i2c_rd(phy, MODULE_DEV_ADDR, 3); + if (v < 0) + return v; + + if (v == 0x10) + return phy_modtype_sr; + if (v == 0x20) + return phy_modtype_lr; + if (v == 0x40) + return phy_modtype_lrm; + + v = ael_i2c_rd(phy, MODULE_DEV_ADDR, 6); + if (v < 0) + return v; + if (v != 4) + goto unknown; + + v = ael_i2c_rd(phy, MODULE_DEV_ADDR, 10); + if (v < 0) + return v; + + if (v & 0x80) { + v = ael_i2c_rd(phy, MODULE_DEV_ADDR, 0x12); + if (v < 0) + return v; + return v > 10 ? phy_modtype_twinax_long : phy_modtype_twinax; + } +unknown: + return phy_modtype_unknown; +} + +/* + * Code to support the Aeluros/NetLogic 2005 10Gb PHY. + */ static int ael2005_setup_sr_edc(struct cphy *phy) { static struct reg_val regs[] = { @@ -893,35 +990,7 @@ static int ael2005_setup_twinax_edc(struct cphy *phy, int modtype) return err; } -static int ael2005_i2c_rd(struct cphy *phy, int dev_addr, int word_addr) -{ - int i, err; - unsigned int stat, data; - - err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, AEL_I2C_CTRL, - (dev_addr << 8) | (1 << 8) | word_addr); - if (err) - return err; - - for (i = 0; i < 5; i++) { - msleep(1); - err = t3_mdio_read(phy, MDIO_MMD_PMAPMD, AEL_I2C_STAT, &stat); - if (err) - return err; - if ((stat & 3) == 1) { - err = t3_mdio_read(phy, MDIO_MMD_PMAPMD, AEL_I2C_DATA, - &data); - if (err) - return err; - return data >> 8; - } - } - CH_WARN(phy->adapter, "PHY %u I2C read of addr %u timed out\n", - phy->mdio.prtad, word_addr); - return -ETIMEDOUT; -} - -static int get_module_type(struct cphy *phy, int delay_ms) +static int ael2005_get_module_type(struct cphy *phy, int delay_ms) { int v; unsigned int stat; @@ -933,39 +1002,7 @@ static int get_module_type(struct cphy *phy, int delay_ms) if (stat & (1 << 8)) /* module absent */ return phy_modtype_none; - if (delay_ms) - msleep(delay_ms); - - /* see SFF-8472 for below */ - v = ael2005_i2c_rd(phy, MODULE_DEV_ADDR, 3); - if (v < 0) - return v; - - if (v == 0x10) - return phy_modtype_sr; - if (v == 0x20) - return phy_modtype_lr; - if (v == 0x40) - return phy_modtype_lrm; - - v = ael2005_i2c_rd(phy, MODULE_DEV_ADDR, 6); - if (v < 0) - return v; - if (v != 4) - goto unknown; - - v = ael2005_i2c_rd(phy, MODULE_DEV_ADDR, 10); - if (v < 0) - return v; - - if (v & 0x80) { - v = ael2005_i2c_rd(phy, MODULE_DEV_ADDR, 0x12); - if (v < 0) - return v; - return v > 10 ? phy_modtype_twinax_long : phy_modtype_twinax; - } -unknown: - return phy_modtype_unknown; + return ael2xxx_get_module_type(phy, delay_ms); } static int ael2005_intr_enable(struct cphy *phy) @@ -1024,7 +1061,7 @@ static int ael2005_reset(struct cphy *phy, int wait) msleep(50); - err = get_module_type(phy, 0); + err = ael2005_get_module_type(phy, 0); if (err < 0) return err; phy->modtype = err; @@ -1062,7 +1099,7 @@ static int ael2005_intr_handler(struct cphy *phy) return ret; /* modules have max 300 ms init time after hot plug */ - ret = get_module_type(phy, 300); + ret = ael2005_get_module_type(phy, 300); if (ret < 0) return ret; @@ -1112,6 +1149,662 @@ int t3_ael2005_phy_prep(struct cphy *phy, struct adapter *adapter, 1 << 5); } +/* + * Setup EDC and other parameters for operation with an optical module. + */ +static int ael2020_setup_sr_edc(struct cphy *phy) +{ + static struct reg_val regs[] = { + /* set CDR offset to 10 */ + { MDIO_MMD_PMAPMD, 0xcc01, 0xffff, 0x488a }, + + /* adjust 10G RX bias current */ + { MDIO_MMD_PMAPMD, 0xcb1b, 0xffff, 0x0200 }, + { MDIO_MMD_PMAPMD, 0xcb1c, 0xffff, 0x00f0 }, + { MDIO_MMD_PMAPMD, 0xcc06, 0xffff, 0x00e0 }, + + /* end */ + { 0, 0, 0, 0 } + }; + int err; + + err = set_phy_regs(phy, regs); + msleep(50); + if (err) + return err; + + phy->priv = edc_sr; + return 0; +} + +/* + * Setup EDC and other parameters for operation with an TWINAX module. + */ +static int ael2020_setup_twinax_edc(struct cphy *phy, int modtype) +{ + /* set uC to 40MHz */ + static struct reg_val uCclock40MHz[] = { + { MDIO_MMD_PMAPMD, 0xff28, 0xffff, 0x4001 }, + { MDIO_MMD_PMAPMD, 0xff2a, 0xffff, 0x0002 }, + { 0, 0, 0, 0 } + }; + + /* activate uC clock */ + static struct reg_val uCclockActivate[] = { + { MDIO_MMD_PMAPMD, 0xd000, 0xffff, 0x5200 }, + { 0, 0, 0, 0 } + }; + + /* set PC to start of SRAM and activate uC */ + static struct reg_val uCactivate[] = { + { MDIO_MMD_PMAPMD, 0xd080, 0xffff, 0x0100 }, + { MDIO_MMD_PMAPMD, 0xd092, 0xffff, 0x0000 }, + { 0, 0, 0, 0 } + }; + + /* TWINAX EDC firmware */ + static u16 twinax_edc[] = { + 0xd800, 0x4009, + 0xd801, 0x2fff, + 0xd802, 0x300f, + 0xd803, 0x40aa, + 0xd804, 0x401c, + 0xd805, 0x401e, + 0xd806, 0x2ff4, + 0xd807, 0x3dc4, + 0xd808, 0x2035, + 0xd809, 0x3035, + 0xd80a, 0x6524, + 0xd80b, 0x2cb2, + 0xd80c, 0x3012, + 0xd80d, 0x1002, + 0xd80e, 0x26e2, + 0xd80f, 0x3022, + 0xd810, 0x1002, + 0xd811, 0x27d2, + 0xd812, 0x3022, + 0xd813, 0x1002, + 0xd814, 0x2822, + 0xd815, 0x3012, + 0xd816, 0x1002, + 0xd817, 0x2492, + 0xd818, 0x3022, + 0xd819, 0x1002, + 0xd81a, 0x2772, + 0xd81b, 0x3012, + 0xd81c, 0x1002, + 0xd81d, 0x23d2, + 0xd81e, 0x3022, + 0xd81f, 0x1002, + 0xd820, 0x22cd, + 0xd821, 0x301d, + 0xd822, 0x27f2, + 0xd823, 0x3022, + 0xd824, 0x1002, + 0xd825, 0x5553, + 0xd826, 0x0307, + 0xd827, 0x2522, + 0xd828, 0x3022, + 0xd829, 0x1002, + 0xd82a, 0x2142, + 0xd82b, 0x3012, + 0xd82c, 0x1002, + 0xd82d, 0x4016, + 0xd82e, 0x5e63, + 0xd82f, 0x0344, + 0xd830, 0x2142, + 0xd831, 0x3012, + 0xd832, 0x1002, + 0xd833, 0x400e, + 0xd834, 0x2522, + 0xd835, 0x3022, + 0xd836, 0x1002, + 0xd837, 0x2b52, + 0xd838, 0x3012, + 0xd839, 0x1002, + 0xd83a, 0x2742, + 0xd83b, 0x3022, + 0xd83c, 0x1002, + 0xd83d, 0x25e2, + 0xd83e, 0x3022, + 0xd83f, 0x1002, + 0xd840, 0x2fa4, + 0xd841, 0x3dc4, + 0xd842, 0x6624, + 0xd843, 0x414b, + 0xd844, 0x56b3, + 0xd845, 0x03c6, + 0xd846, 0x866b, + 0xd847, 0x400c, + 0xd848, 0x2712, + 0xd849, 0x3012, + 0xd84a, 0x1002, + 0xd84b, 0x2c4b, + 0xd84c, 0x309b, + 0xd84d, 0x56b3, + 0xd84e, 0x03c3, + 0xd84f, 0x866b, + 0xd850, 0x400c, + 0xd851, 0x2272, + 0xd852, 0x3022, + 0xd853, 0x1002, + 0xd854, 0x2742, + 0xd855, 0x3022, + 0xd856, 0x1002, + 0xd857, 0x25e2, + 0xd858, 0x3022, + 0xd859, 0x1002, + 0xd85a, 0x2fb4, + 0xd85b, 0x3dc4, + 0xd85c, 0x6624, + 0xd85d, 0x56b3, + 0xd85e, 0x03c3, + 0xd85f, 0x866b, + 0xd860, 0x401c, + 0xd861, 0x2c45, + 0xd862, 0x3095, + 0xd863, 0x5b53, + 0xd864, 0x2372, + 0xd865, 0x3012, + 0xd866, 0x13c2, + 0xd867, 0x5cc3, + 0xd868, 0x2712, + 0xd869, 0x3012, + 0xd86a, 0x1312, + 0xd86b, 0x2b52, + 0xd86c, 0x3012, + 0xd86d, 0x1002, + 0xd86e, 0x2742, + 0xd86f, 0x3022, + 0xd870, 0x1002, + 0xd871, 0x2582, + 0xd872, 0x3022, + 0xd873, 0x1002, + 0xd874, 0x2142, + 0xd875, 0x3012, + 0xd876, 0x1002, + 0xd877, 0x628f, + 0xd878, 0x2985, + 0xd879, 0x33a5, + 0xd87a, 0x25e2, + 0xd87b, 0x3022, + 0xd87c, 0x1002, + 0xd87d, 0x5653, + 0xd87e, 0x03d2, + 0xd87f, 0x401e, + 0xd880, 0x6f72, + 0xd881, 0x1002, + 0xd882, 0x628f, + 0xd883, 0x2304, + 0xd884, 0x3c84, + 0xd885, 0x6436, + 0xd886, 0xdff4, + 0xd887, 0x6436, + 0xd888, 0x2ff5, + 0xd889, 0x3005, + 0xd88a, 0x8656, + 0xd88b, 0xdfba, + 0xd88c, 0x56a3, + 0xd88d, 0xd05a, + 0xd88e, 0x2972, + 0xd88f, 0x3012, + 0xd890, 0x1392, + 0xd891, 0xd05a, + 0xd892, 0x56a3, + 0xd893, 0xdfba, + 0xd894, 0x0383, + 0xd895, 0x6f72, + 0xd896, 0x1002, + 0xd897, 0x2b45, + 0xd898, 0x3005, + 0xd899, 0x4178, + 0xd89a, 0x5653, + 0xd89b, 0x0384, + 0xd89c, 0x2a62, + 0xd89d, 0x3012, + 0xd89e, 0x1002, + 0xd89f, 0x2f05, + 0xd8a0, 0x3005, + 0xd8a1, 0x41c8, + 0xd8a2, 0x5653, + 0xd8a3, 0x0382, + 0xd8a4, 0x0002, + 0xd8a5, 0x4218, + 0xd8a6, 0x2474, + 0xd8a7, 0x3c84, + 0xd8a8, 0x6437, + 0xd8a9, 0xdff4, + 0xd8aa, 0x6437, + 0xd8ab, 0x2ff5, + 0xd8ac, 0x3c05, + 0xd8ad, 0x8757, + 0xd8ae, 0xb888, + 0xd8af, 0x9787, + 0xd8b0, 0xdff4, + 0xd8b1, 0x6724, + 0xd8b2, 0x866a, + 0xd8b3, 0x6f72, + 0xd8b4, 0x1002, + 0xd8b5, 0x2641, + 0xd8b6, 0x3021, + 0xd8b7, 0x1001, + 0xd8b8, 0xc620, + 0xd8b9, 0x0000, + 0xd8ba, 0xc621, + 0xd8bb, 0x0000, + 0xd8bc, 0xc622, + 0xd8bd, 0x00ce, + 0xd8be, 0xc623, + 0xd8bf, 0x007f, + 0xd8c0, 0xc624, + 0xd8c1, 0x0032, + 0xd8c2, 0xc625, + 0xd8c3, 0x0000, + 0xd8c4, 0xc627, + 0xd8c5, 0x0000, + 0xd8c6, 0xc628, + 0xd8c7, 0x0000, + 0xd8c8, 0xc62c, + 0xd8c9, 0x0000, + 0xd8ca, 0x0000, + 0xd8cb, 0x2641, + 0xd8cc, 0x3021, + 0xd8cd, 0x1001, + 0xd8ce, 0xc502, + 0xd8cf, 0x53ac, + 0xd8d0, 0xc503, + 0xd8d1, 0x2cd3, + 0xd8d2, 0xc600, + 0xd8d3, 0x2a6e, + 0xd8d4, 0xc601, + 0xd8d5, 0x2a2c, + 0xd8d6, 0xc605, + 0xd8d7, 0x5557, + 0xd8d8, 0xc60c, + 0xd8d9, 0x5400, + 0xd8da, 0xc710, + 0xd8db, 0x0700, + 0xd8dc, 0xc711, + 0xd8dd, 0x0f06, + 0xd8de, 0xc718, + 0xd8df, 0x0700, + 0xd8e0, 0xc719, + 0xd8e1, 0x0f06, + 0xd8e2, 0xc720, + 0xd8e3, 0x4700, + 0xd8e4, 0xc721, + 0xd8e5, 0x0f06, + 0xd8e6, 0xc728, + 0xd8e7, 0x0700, + 0xd8e8, 0xc729, + 0xd8e9, 0x1207, + 0xd8ea, 0xc801, + 0xd8eb, 0x7f50, + 0xd8ec, 0xc802, + 0xd8ed, 0x7760, + 0xd8ee, 0xc803, + 0xd8ef, 0x7fce, + 0xd8f0, 0xc804, + 0xd8f1, 0x520e, + 0xd8f2, 0xc805, + 0xd8f3, 0x5c11, + 0xd8f4, 0xc806, + 0xd8f5, 0x3c51, + 0xd8f6, 0xc807, + 0xd8f7, 0x4061, + 0xd8f8, 0xc808, + 0xd8f9, 0x49c1, + 0xd8fa, 0xc809, + 0xd8fb, 0x3840, + 0xd8fc, 0xc80a, + 0xd8fd, 0x0000, + 0xd8fe, 0xc821, + 0xd8ff, 0x0002, + 0xd900, 0xc822, + 0xd901, 0x0046, + 0xd902, 0xc844, + 0xd903, 0x182f, + 0xd904, 0xc013, + 0xd905, 0xf341, + 0xd906, 0xc084, + 0xd907, 0x0030, + 0xd908, 0xc904, + 0xd909, 0x1401, + 0xd90a, 0xcb0c, + 0xd90b, 0x0004, + 0xd90c, 0xcb0e, + 0xd90d, 0xa00a, + 0xd90e, 0xcb0f, + 0xd90f, 0xc0c0, + 0xd910, 0xcb10, + 0xd911, 0xc0c0, + 0xd912, 0xcb11, + 0xd913, 0x00a0, + 0xd914, 0xcb12, + 0xd915, 0x0007, + 0xd916, 0xc241, + 0xd917, 0xa000, + 0xd918, 0xc243, + 0xd919, 0x7fe0, + 0xd91a, 0xc604, + 0xd91b, 0x000e, + 0xd91c, 0xc609, + 0xd91d, 0x00f5, + 0xd91e, 0xc611, + 0xd91f, 0x000e, + 0xd920, 0xc660, + 0xd921, 0x9600, + 0xd922, 0xc687, + 0xd923, 0x0004, + 0xd924, 0xc60a, + 0xd925, 0x04f5, + 0xd926, 0x0000, + 0xd927, 0x2641, + 0xd928, 0x3021, + 0xd929, 0x1001, + 0xd92a, 0xc620, + 0xd92b, 0x14e5, + 0xd92c, 0xc621, + 0xd92d, 0xc53d, + 0xd92e, 0xc622, + 0xd92f, 0x3cbe, + 0xd930, 0xc623, + 0xd931, 0x4452, + 0xd932, 0xc624, + 0xd933, 0xc5c5, + 0xd934, 0xc625, + 0xd935, 0xe01e, + 0xd936, 0xc627, + 0xd937, 0x0000, + 0xd938, 0xc628, + 0xd939, 0x0000, + 0xd93a, 0xc62c, + 0xd93b, 0x0000, + 0xd93c, 0x0000, + 0xd93d, 0x2b84, + 0xd93e, 0x3c74, + 0xd93f, 0x6435, + 0xd940, 0xdff4, + 0xd941, 0x6435, + 0xd942, 0x2806, + 0xd943, 0x3006, + 0xd944, 0x8565, + 0xd945, 0x2b24, + 0xd946, 0x3c24, + 0xd947, 0x6436, + 0xd948, 0x1002, + 0xd949, 0x2b24, + 0xd94a, 0x3c24, + 0xd94b, 0x6436, + 0xd94c, 0x4045, + 0xd94d, 0x8656, + 0xd94e, 0x5663, + 0xd94f, 0x0302, + 0xd950, 0x401e, + 0xd951, 0x1002, + 0xd952, 0x2807, + 0xd953, 0x31a7, + 0xd954, 0x20c4, + 0xd955, 0x3c24, + 0xd956, 0x6724, + 0xd957, 0x1002, + 0xd958, 0x2807, + 0xd959, 0x3187, + 0xd95a, 0x20c4, + 0xd95b, 0x3c24, + 0xd95c, 0x6724, + 0xd95d, 0x1002, + 0xd95e, 0x24f4, + 0xd95f, 0x3c64, + 0xd960, 0x6436, + 0xd961, 0xdff4, + 0xd962, 0x6436, + 0xd963, 0x1002, + 0xd964, 0x2006, + 0xd965, 0x3d76, + 0xd966, 0xc161, + 0xd967, 0x6134, + 0xd968, 0x6135, + 0xd969, 0x5443, + 0xd96a, 0x0303, + 0xd96b, 0x6524, + 0xd96c, 0x00fb, + 0xd96d, 0x1002, + 0xd96e, 0x20d4, + 0xd96f, 0x3c24, + 0xd970, 0x2025, + 0xd971, 0x3005, + 0xd972, 0x6524, + 0xd973, 0x1002, + 0xd974, 0xd019, + 0xd975, 0x2104, + 0xd976, 0x3c24, + 0xd977, 0x2105, + 0xd978, 0x3805, + 0xd979, 0x6524, + 0xd97a, 0xdff4, + 0xd97b, 0x4005, + 0xd97c, 0x6524, + 0xd97d, 0x2e8d, + 0xd97e, 0x303d, + 0xd97f, 0x2408, + 0xd980, 0x35d8, + 0xd981, 0x5dd3, + 0xd982, 0x0307, + 0xd983, 0x8887, + 0xd984, 0x63a7, + 0xd985, 0x8887, + 0xd986, 0x63a7, + 0xd987, 0xdffd, + 0xd988, 0x00f9, + 0xd989, 0x1002, + 0xd98a, 0x0000, + }; + int i, err; + + /* set uC clock and activate it */ + err = set_phy_regs(phy, uCclock40MHz); + msleep(500); + if (err) + return err; + err = set_phy_regs(phy, uCclockActivate); + msleep(500); + if (err) + return err; + + /* write TWINAX EDC firmware into PHY */ + for (i = 0; i < ARRAY_SIZE(twinax_edc) && !err; i += 2) + err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, twinax_edc[i], + twinax_edc[i + 1]); + /* activate uC */ + err = set_phy_regs(phy, uCactivate); + if (!err) + phy->priv = edc_twinax; + return err; +} + +/* + * Return Module Type. + */ +static int ael2020_get_module_type(struct cphy *phy, int delay_ms) +{ + int v; + unsigned int stat; + + v = t3_mdio_read(phy, MDIO_MMD_PMAPMD, AEL2020_GPIO_STAT, &stat); + if (v) + return v; + + if (stat & (0x1 << (AEL2020_GPIO_MODDET*4))) { + /* module absent */ + return phy_modtype_none; + } + + return ael2xxx_get_module_type(phy, delay_ms); +} + +/* + * Enable PHY interrupts. We enable "Module Detection" interrupts (on any + * state transition) and then generic Link Alarm Status Interrupt (LASI). + */ +static int ael2020_intr_enable(struct cphy *phy) +{ + int err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, AEL2020_GPIO_CTRL, + 0x2 << (AEL2020_GPIO_MODDET*4)); + return err ? err : t3_phy_lasi_intr_enable(phy); +} + +/* + * Disable PHY interrupts. The mirror of the above ... + */ +static int ael2020_intr_disable(struct cphy *phy) +{ + int err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, AEL2020_GPIO_CTRL, + 0x1 << (AEL2020_GPIO_MODDET*4)); + return err ? err : t3_phy_lasi_intr_disable(phy); +} + +/* + * Clear PHY interrupt state. + */ +static int ael2020_intr_clear(struct cphy *phy) +{ + /* + * The GPIO Interrupt register on the AEL2020 is a "Latching High" + * (LH) register which is cleared to the current state when it's read. + * Thus, we simply read the register and discard the result. + */ + unsigned int stat; + int err = t3_mdio_read(phy, MDIO_MMD_PMAPMD, AEL2020_GPIO_INTR, &stat); + return err ? err : t3_phy_lasi_intr_clear(phy); +} + +/* + * Reset the PHY and put it into a canonical operating state. + */ +static int ael2020_reset(struct cphy *phy, int wait) +{ + static struct reg_val regs0[] = { + /* Erratum #2: CDRLOL asserted, causing PMA link down status */ + { MDIO_MMD_PMAPMD, 0xc003, 0xffff, 0x3101 }, + + /* force XAUI to send LF when RX_LOS is asserted */ + { MDIO_MMD_PMAPMD, 0xcd40, 0xffff, 0x0001 }, + + /* RX_LOS pin is active high */ + { MDIO_MMD_PMAPMD, AEL_OPT_SETTINGS, + 0x0020, 0x0020 }, + + /* output Module's Loss Of Signal (LOS) to LED */ + { MDIO_MMD_PMAPMD, AEL2020_GPIO_CFG+AEL2020_GPIO_LSTAT, + 0xffff, 0x0004 }, + { MDIO_MMD_PMAPMD, AEL2020_GPIO_CTRL, + 0xffff, 0x8 << (AEL2020_GPIO_LSTAT*4) }, + + /* end */ + { 0, 0, 0, 0 } + }; + int err; + unsigned int lasi_ctrl; + + /* grab current interrupt state */ + err = t3_mdio_read(phy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_CTRL, + &lasi_ctrl); + if (err) + return err; + + err = t3_phy_reset(phy, MDIO_MMD_PMAPMD, 125); + if (err) + return err; + msleep(100); + + /* basic initialization for all module types */ + phy->priv = edc_none; + err = set_phy_regs(phy, regs0); + if (err) + return err; + + /* determine module type and perform appropriate initialization */ + err = ael2020_get_module_type(phy, 0); + if (err < 0) + return err; + phy->modtype = (u8)err; + if (err == phy_modtype_twinax || err == phy_modtype_twinax_long) + err = ael2020_setup_twinax_edc(phy, err); + else + err = ael2020_setup_sr_edc(phy); + if (err) + return err; + + /* reset wipes out interrupts, reenable them if they were on */ + if (lasi_ctrl & 1) + err = ael2005_intr_enable(phy); + return err; +} + +/* + * Handle a PHY interrupt. + */ +static int ael2020_intr_handler(struct cphy *phy) +{ + unsigned int stat; + int ret, edc_needed, cause = 0; + + ret = t3_mdio_read(phy, MDIO_MMD_PMAPMD, AEL2020_GPIO_INTR, &stat); + if (ret) + return ret; + + if (stat & (0x1 << AEL2020_GPIO_MODDET)) { + /* modules have max 300 ms init time after hot plug */ + ret = ael2020_get_module_type(phy, 300); + if (ret < 0) + return ret; + + phy->modtype = (u8)ret; + if (ret == phy_modtype_none) + edc_needed = phy->priv; /* on unplug retain EDC */ + else if (ret == phy_modtype_twinax || + ret == phy_modtype_twinax_long) + edc_needed = edc_twinax; + else + edc_needed = edc_sr; + + if (edc_needed != phy->priv) { + ret = ael2020_reset(phy, 0); + return ret ? ret : cphy_cause_module_change; + } + cause = cphy_cause_module_change; + } + + ret = t3_phy_lasi_intr_handler(phy); + if (ret < 0) + return ret; + + ret |= cause; + return ret ? ret : cphy_cause_link_change; +} + +static struct cphy_ops ael2020_ops = { + .reset = ael2020_reset, + .intr_enable = ael2020_intr_enable, + .intr_disable = ael2020_intr_disable, + .intr_clear = ael2020_intr_clear, + .intr_handler = ael2020_intr_handler, + .get_link_status = get_link_status_r, + .power_down = ael1002_power_down, + .mmds = MDIO_DEVS_PMAPMD | MDIO_DEVS_PCS | MDIO_DEVS_PHYXS, +}; + +int t3_ael2020_phy_prep(struct cphy *phy, struct adapter *adapter, int phy_addr, + const struct mdio_ops *mdio_ops) +{ + cphy_init(phy, adapter, phy_addr, &ael2020_ops, mdio_ops, + SUPPORTED_10000baseT_Full | SUPPORTED_AUI | SUPPORTED_FIBRE | + SUPPORTED_IRQ, "10GBASE-R"); + msleep(125); + return 0; +} + /* * Get link status for a 10GBASE-X device. */ -- cgit v1.2.2