From f1d3d38af75789f1b82969b83b69cab540609789 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 1 Dec 2006 16:36:16 -0800 Subject: [PATCH] chelsio: add support for other 10G boards Add support for other versions of the 10G Chelsio boards. This is basically a port of the vendor driver with the TOE features removed. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/chelsio/mv88e1xxx.h | 127 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 127 insertions(+) create mode 100644 drivers/net/chelsio/mv88e1xxx.h (limited to 'drivers/net/chelsio/mv88e1xxx.h') diff --git a/drivers/net/chelsio/mv88e1xxx.h b/drivers/net/chelsio/mv88e1xxx.h new file mode 100644 index 000000000000..967cc4286359 --- /dev/null +++ b/drivers/net/chelsio/mv88e1xxx.h @@ -0,0 +1,127 @@ +/* $Date: 2005/03/07 23:59:05 $ $RCSfile: mv88e1xxx.h,v $ $Revision: 1.13 $ */ +#ifndef CHELSIO_MV8E1XXX_H +#define CHELSIO_MV8E1XXX_H + +#ifndef BMCR_SPEED1000 +# define BMCR_SPEED1000 0x40 +#endif + +#ifndef ADVERTISE_PAUSE +# define ADVERTISE_PAUSE 0x400 +#endif +#ifndef ADVERTISE_PAUSE_ASYM +# define ADVERTISE_PAUSE_ASYM 0x800 +#endif + +/* Gigabit MII registers */ +#define MII_GBCR 9 /* 1000Base-T control register */ +#define MII_GBSR 10 /* 1000Base-T status register */ + +/* 1000Base-T control register fields */ +#define GBCR_ADV_1000HALF 0x100 +#define GBCR_ADV_1000FULL 0x200 +#define GBCR_PREFER_MASTER 0x400 +#define GBCR_MANUAL_AS_MASTER 0x800 +#define GBCR_MANUAL_CONFIG_ENABLE 0x1000 + +/* 1000Base-T status register fields */ +#define GBSR_LP_1000HALF 0x400 +#define GBSR_LP_1000FULL 0x800 +#define GBSR_REMOTE_OK 0x1000 +#define GBSR_LOCAL_OK 0x2000 +#define GBSR_LOCAL_MASTER 0x4000 +#define GBSR_MASTER_FAULT 0x8000 + +/* Marvell PHY interrupt status bits. */ +#define MV88E1XXX_INTR_JABBER 0x0001 +#define MV88E1XXX_INTR_POLARITY_CHNG 0x0002 +#define MV88E1XXX_INTR_ENG_DETECT_CHNG 0x0010 +#define MV88E1XXX_INTR_DOWNSHIFT 0x0020 +#define MV88E1XXX_INTR_MDI_XOVER_CHNG 0x0040 +#define MV88E1XXX_INTR_FIFO_OVER_UNDER 0x0080 +#define MV88E1XXX_INTR_FALSE_CARRIER 0x0100 +#define MV88E1XXX_INTR_SYMBOL_ERROR 0x0200 +#define MV88E1XXX_INTR_LINK_CHNG 0x0400 +#define MV88E1XXX_INTR_AUTONEG_DONE 0x0800 +#define MV88E1XXX_INTR_PAGE_RECV 0x1000 +#define MV88E1XXX_INTR_DUPLEX_CHNG 0x2000 +#define MV88E1XXX_INTR_SPEED_CHNG 0x4000 +#define MV88E1XXX_INTR_AUTONEG_ERR 0x8000 + +/* Marvell PHY specific registers. */ +#define MV88E1XXX_SPECIFIC_CNTRL_REGISTER 16 +#define MV88E1XXX_SPECIFIC_STATUS_REGISTER 17 +#define MV88E1XXX_INTERRUPT_ENABLE_REGISTER 18 +#define MV88E1XXX_INTERRUPT_STATUS_REGISTER 19 +#define MV88E1XXX_EXT_PHY_SPECIFIC_CNTRL_REGISTER 20 +#define MV88E1XXX_RECV_ERR_CNTR_REGISTER 21 +#define MV88E1XXX_RES_REGISTER 22 +#define MV88E1XXX_GLOBAL_STATUS_REGISTER 23 +#define MV88E1XXX_LED_CONTROL_REGISTER 24 +#define MV88E1XXX_MANUAL_LED_OVERRIDE_REGISTER 25 +#define MV88E1XXX_EXT_PHY_SPECIFIC_CNTRL_2_REGISTER 26 +#define MV88E1XXX_EXT_PHY_SPECIFIC_STATUS_REGISTER 27 +#define MV88E1XXX_VIRTUAL_CABLE_TESTER_REGISTER 28 +#define MV88E1XXX_EXTENDED_ADDR_REGISTER 29 +#define MV88E1XXX_EXTENDED_REGISTER 30 + +/* PHY specific control register fields */ +#define S_PSCR_MDI_XOVER_MODE 5 +#define M_PSCR_MDI_XOVER_MODE 0x3 +#define V_PSCR_MDI_XOVER_MODE(x) ((x) << S_PSCR_MDI_XOVER_MODE) +#define G_PSCR_MDI_XOVER_MODE(x) (((x) >> S_PSCR_MDI_XOVER_MODE) & M_PSCR_MDI_XOVER_MODE) + +/* Extended PHY specific control register fields */ +#define S_DOWNSHIFT_ENABLE 8 +#define V_DOWNSHIFT_ENABLE (1 << S_DOWNSHIFT_ENABLE) + +#define S_DOWNSHIFT_CNT 9 +#define M_DOWNSHIFT_CNT 0x7 +#define V_DOWNSHIFT_CNT(x) ((x) << S_DOWNSHIFT_CNT) +#define G_DOWNSHIFT_CNT(x) (((x) >> S_DOWNSHIFT_CNT) & M_DOWNSHIFT_CNT) + +/* PHY specific status register fields */ +#define S_PSSR_JABBER 0 +#define V_PSSR_JABBER (1 << S_PSSR_JABBER) + +#define S_PSSR_POLARITY 1 +#define V_PSSR_POLARITY (1 << S_PSSR_POLARITY) + +#define S_PSSR_RX_PAUSE 2 +#define V_PSSR_RX_PAUSE (1 << S_PSSR_RX_PAUSE) + +#define S_PSSR_TX_PAUSE 3 +#define V_PSSR_TX_PAUSE (1 << S_PSSR_TX_PAUSE) + +#define S_PSSR_ENERGY_DETECT 4 +#define V_PSSR_ENERGY_DETECT (1 << S_PSSR_ENERGY_DETECT) + +#define S_PSSR_DOWNSHIFT_STATUS 5 +#define V_PSSR_DOWNSHIFT_STATUS (1 << S_PSSR_DOWNSHIFT_STATUS) + +#define S_PSSR_MDI 6 +#define V_PSSR_MDI (1 << S_PSSR_MDI) + +#define S_PSSR_CABLE_LEN 7 +#define M_PSSR_CABLE_LEN 0x7 +#define V_PSSR_CABLE_LEN(x) ((x) << S_PSSR_CABLE_LEN) +#define G_PSSR_CABLE_LEN(x) (((x) >> S_PSSR_CABLE_LEN) & M_PSSR_CABLE_LEN) + +#define S_PSSR_LINK 10 +#define V_PSSR_LINK (1 << S_PSSR_LINK) + +#define S_PSSR_STATUS_RESOLVED 11 +#define V_PSSR_STATUS_RESOLVED (1 << S_PSSR_STATUS_RESOLVED) + +#define S_PSSR_PAGE_RECEIVED 12 +#define V_PSSR_PAGE_RECEIVED (1 << S_PSSR_PAGE_RECEIVED) + +#define S_PSSR_DUPLEX 13 +#define V_PSSR_DUPLEX (1 << S_PSSR_DUPLEX) + +#define S_PSSR_SPEED 14 +#define M_PSSR_SPEED 0x3 +#define V_PSSR_SPEED(x) ((x) << S_PSSR_SPEED) +#define G_PSSR_SPEED(x) (((x) >> S_PSSR_SPEED) & M_PSSR_SPEED) + +#endif -- cgit v1.2.2