From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/net/bonding/bond_3ad.c | 2451 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 2451 insertions(+) create mode 100644 drivers/net/bonding/bond_3ad.c (limited to 'drivers/net/bonding/bond_3ad.c') diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c new file mode 100644 index 000000000000..6233c4ffb805 --- /dev/null +++ b/drivers/net/bonding/bond_3ad.c @@ -0,0 +1,2451 @@ +/* + * Copyright(c) 1999 - 2004 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * + * Changes: + * + * 2003/05/01 - Tsippy Mendelson and + * Amir Noam + * - Added support for lacp_rate module param. + * + * 2003/05/01 - Shmulik Hen + * - Based on discussion on mailing list, changed locking scheme + * to use lock/unlock or lock_bh/unlock_bh appropriately instead + * of lock_irqsave/unlock_irqrestore. The new scheme helps exposing + * hidden bugs and solves system hangs that occurred due to the fact + * that holding lock_irqsave doesn't prevent softirqs from running. + * This also increases total throughput since interrupts are not + * blocked on each transmitted packets or monitor timeout. + * + * 2003/05/01 - Shmulik Hen + * - Renamed bond_3ad_link_status_changed() to + * bond_3ad_handle_link_change() for compatibility with TLB. + * + * 2003/05/20 - Amir Noam + * - Fix long fail over time when releasing last slave of an active + * aggregator - send LACPDU on unbind of slave to tell partner this + * port is no longer aggregatable. + * + * 2003/06/25 - Tsippy Mendelson + * - Send LACPDU as highest priority packet to further fix the above + * problem on very high Tx traffic load where packets may get dropped + * by the slave. + * + * 2003/12/01 - Shmulik Hen + * - Code cleanup and style changes + */ + +//#define BONDING_DEBUG 1 + +#include +#include +#include +#include +#include +#include +#include +#include "bonding.h" +#include "bond_3ad.h" + +// General definitions +#define AD_SHORT_TIMEOUT 1 +#define AD_LONG_TIMEOUT 0 +#define AD_STANDBY 0x2 +#define AD_MAX_TX_IN_SECOND 3 +#define AD_COLLECTOR_MAX_DELAY 0 + +// Timer definitions(43.4.4 in the 802.3ad standard) +#define AD_FAST_PERIODIC_TIME 1 +#define AD_SLOW_PERIODIC_TIME 30 +#define AD_SHORT_TIMEOUT_TIME (3*AD_FAST_PERIODIC_TIME) +#define AD_LONG_TIMEOUT_TIME (3*AD_SLOW_PERIODIC_TIME) +#define AD_CHURN_DETECTION_TIME 60 +#define AD_AGGREGATE_WAIT_TIME 2 + +// Port state definitions(43.4.2.2 in the 802.3ad standard) +#define AD_STATE_LACP_ACTIVITY 0x1 +#define AD_STATE_LACP_TIMEOUT 0x2 +#define AD_STATE_AGGREGATION 0x4 +#define AD_STATE_SYNCHRONIZATION 0x8 +#define AD_STATE_COLLECTING 0x10 +#define AD_STATE_DISTRIBUTING 0x20 +#define AD_STATE_DEFAULTED 0x40 +#define AD_STATE_EXPIRED 0x80 + +// Port Variables definitions used by the State Machines(43.4.7 in the 802.3ad standard) +#define AD_PORT_BEGIN 0x1 +#define AD_PORT_LACP_ENABLED 0x2 +#define AD_PORT_ACTOR_CHURN 0x4 +#define AD_PORT_PARTNER_CHURN 0x8 +#define AD_PORT_READY 0x10 +#define AD_PORT_READY_N 0x20 +#define AD_PORT_MATCHED 0x40 +#define AD_PORT_STANDBY 0x80 +#define AD_PORT_SELECTED 0x100 +#define AD_PORT_MOVED 0x200 + +// Port Key definitions +// key is determined according to the link speed, duplex and +// user key(which is yet not supported) +// ------------------------------------------------------------ +// Port key : | User key | Speed |Duplex| +// ------------------------------------------------------------ +// 16 6 1 0 +#define AD_DUPLEX_KEY_BITS 0x1 +#define AD_SPEED_KEY_BITS 0x3E +#define AD_USER_KEY_BITS 0xFFC0 + +//dalloun +#define AD_LINK_SPEED_BITMASK_1MBPS 0x1 +#define AD_LINK_SPEED_BITMASK_10MBPS 0x2 +#define AD_LINK_SPEED_BITMASK_100MBPS 0x4 +#define AD_LINK_SPEED_BITMASK_1000MBPS 0x8 +//endalloun + +// compare MAC addresses +#define MAC_ADDRESS_COMPARE(A, B) memcmp(A, B, ETH_ALEN) + +static struct mac_addr null_mac_addr = {{0, 0, 0, 0, 0, 0}}; +static u16 ad_ticks_per_sec; +static const int ad_delta_in_ticks = (AD_TIMER_INTERVAL * HZ) / 1000; + +// ================= 3AD api to bonding and kernel code ================== +static u16 __get_link_speed(struct port *port); +static u8 __get_duplex(struct port *port); +static inline void __initialize_port_locks(struct port *port); +//conversions +static void __ntohs_lacpdu(struct lacpdu *lacpdu); +static u16 __ad_timer_to_ticks(u16 timer_type, u16 Par); + + +// ================= ad code helper functions ================== +//needed by ad_rx_machine(...) +static void __record_pdu(struct lacpdu *lacpdu, struct port *port); +static void __record_default(struct port *port); +static void __update_selected(struct lacpdu *lacpdu, struct port *port); +static void __update_default_selected(struct port *port); +static void __choose_matched(struct lacpdu *lacpdu, struct port *port); +static void __update_ntt(struct lacpdu *lacpdu, struct port *port); + +//needed for ad_mux_machine(..) +static void __attach_bond_to_agg(struct port *port); +static void __detach_bond_from_agg(struct port *port); +static int __agg_ports_are_ready(struct aggregator *aggregator); +static void __set_agg_ports_ready(struct aggregator *aggregator, int val); + +//needed for ad_agg_selection_logic(...) +static u32 __get_agg_bandwidth(struct aggregator *aggregator); +static struct aggregator *__get_active_agg(struct aggregator *aggregator); + + +// ================= main 802.3ad protocol functions ================== +static int ad_lacpdu_send(struct port *port); +static int ad_marker_send(struct port *port, struct marker *marker); +static void ad_mux_machine(struct port *port); +static void ad_rx_machine(struct lacpdu *lacpdu, struct port *port); +static void ad_tx_machine(struct port *port); +static void ad_periodic_machine(struct port *port); +static void ad_port_selection_logic(struct port *port); +static void ad_agg_selection_logic(struct aggregator *aggregator); +static void ad_clear_agg(struct aggregator *aggregator); +static void ad_initialize_agg(struct aggregator *aggregator); +static void ad_initialize_port(struct port *port, int lacp_fast); +static void ad_initialize_lacpdu(struct lacpdu *Lacpdu); +static void ad_enable_collecting_distributing(struct port *port); +static void ad_disable_collecting_distributing(struct port *port); +static void ad_marker_info_received(struct marker *marker_info, struct port *port); +static void ad_marker_response_received(struct marker *marker, struct port *port); + + +///////////////////////////////////////////////////////////////////////////////// +// ================= api to bonding and kernel code ================== +///////////////////////////////////////////////////////////////////////////////// + +/** + * __get_bond_by_port - get the port's bonding struct + * @port: the port we're looking at + * + * Return @port's bonding struct, or %NULL if it can't be found. + */ +static inline struct bonding *__get_bond_by_port(struct port *port) +{ + if (port->slave == NULL) { + return NULL; + } + + return bond_get_bond_by_slave(port->slave); +} + +/** + * __get_first_port - get the first port in the bond + * @bond: the bond we're looking at + * + * Return the port of the first slave in @bond, or %NULL if it can't be found. + */ +static inline struct port *__get_first_port(struct bonding *bond) +{ + if (bond->slave_cnt == 0) { + return NULL; + } + + return &(SLAVE_AD_INFO(bond->first_slave).port); +} + +/** + * __get_next_port - get the next port in the bond + * @port: the port we're looking at + * + * Return the port of the slave that is next in line of @port's slave in the + * bond, or %NULL if it can't be found. + */ +static inline struct port *__get_next_port(struct port *port) +{ + struct bonding *bond = __get_bond_by_port(port); + struct slave *slave = port->slave; + + // If there's no bond for this port, or this is the last slave + if ((bond == NULL) || (slave->next == bond->first_slave)) { + return NULL; + } + + return &(SLAVE_AD_INFO(slave->next).port); +} + +/** + * __get_first_agg - get the first aggregator in the bond + * @bond: the bond we're looking at + * + * Return the aggregator of the first slave in @bond, or %NULL if it can't be + * found. + */ +static inline struct aggregator *__get_first_agg(struct port *port) +{ + struct bonding *bond = __get_bond_by_port(port); + + // If there's no bond for this port, or bond has no slaves + if ((bond == NULL) || (bond->slave_cnt == 0)) { + return NULL; + } + + return &(SLAVE_AD_INFO(bond->first_slave).aggregator); +} + +/** + * __get_next_agg - get the next aggregator in the bond + * @aggregator: the aggregator we're looking at + * + * Return the aggregator of the slave that is next in line of @aggregator's + * slave in the bond, or %NULL if it can't be found. + */ +static inline struct aggregator *__get_next_agg(struct aggregator *aggregator) +{ + struct slave *slave = aggregator->slave; + struct bonding *bond = bond_get_bond_by_slave(slave); + + // If there's no bond for this aggregator, or this is the last slave + if ((bond == NULL) || (slave->next == bond->first_slave)) { + return NULL; + } + + return &(SLAVE_AD_INFO(slave->next).aggregator); +} + +/** + * __disable_port - disable the port's slave + * @port: the port we're looking at + * + */ +static inline void __disable_port(struct port *port) +{ + bond_set_slave_inactive_flags(port->slave); +} + +/** + * __enable_port - enable the port's slave, if it's up + * @port: the port we're looking at + * + */ +static inline void __enable_port(struct port *port) +{ + struct slave *slave = port->slave; + + if ((slave->link == BOND_LINK_UP) && IS_UP(slave->dev)) { + bond_set_slave_active_flags(slave); + } +} + +/** + * __port_is_enabled - check if the port's slave is in active state + * @port: the port we're looking at + * + */ +static inline int __port_is_enabled(struct port *port) +{ + return(port->slave->state == BOND_STATE_ACTIVE); +} + +/** + * __get_agg_selection_mode - get the aggregator selection mode + * @port: the port we're looking at + * + * Get the aggregator selection mode. Can be %BANDWIDTH or %COUNT. + */ +static inline u32 __get_agg_selection_mode(struct port *port) +{ + struct bonding *bond = __get_bond_by_port(port); + + if (bond == NULL) { + return AD_BANDWIDTH; + } + + return BOND_AD_INFO(bond).agg_select_mode; +} + +/** + * __check_agg_selection_timer - check if the selection timer has expired + * @port: the port we're looking at + * + */ +static inline int __check_agg_selection_timer(struct port *port) +{ + struct bonding *bond = __get_bond_by_port(port); + + if (bond == NULL) { + return 0; + } + + return BOND_AD_INFO(bond).agg_select_timer ? 1 : 0; +} + +/** + * __get_rx_machine_lock - lock the port's RX machine + * @port: the port we're looking at + * + */ +static inline void __get_rx_machine_lock(struct port *port) +{ + spin_lock(&(SLAVE_AD_INFO(port->slave).rx_machine_lock)); +} + +/** + * __release_rx_machine_lock - unlock the port's RX machine + * @port: the port we're looking at + * + */ +static inline void __release_rx_machine_lock(struct port *port) +{ + spin_unlock(&(SLAVE_AD_INFO(port->slave).rx_machine_lock)); +} + +/** + * __get_link_speed - get a port's speed + * @port: the port we're looking at + * + * Return @port's speed in 802.3ad bitmask format. i.e. one of: + * 0, + * %AD_LINK_SPEED_BITMASK_10MBPS, + * %AD_LINK_SPEED_BITMASK_100MBPS, + * %AD_LINK_SPEED_BITMASK_1000MBPS + */ +static u16 __get_link_speed(struct port *port) +{ + struct slave *slave = port->slave; + u16 speed; + + /* this if covers only a special case: when the configuration starts with + * link down, it sets the speed to 0. + * This is done in spite of the fact that the e100 driver reports 0 to be + * compatible with MVT in the future.*/ + if (slave->link != BOND_LINK_UP) { + speed=0; + } else { + switch (slave->speed) { + case SPEED_10: + speed = AD_LINK_SPEED_BITMASK_10MBPS; + break; + + case SPEED_100: + speed = AD_LINK_SPEED_BITMASK_100MBPS; + break; + + case SPEED_1000: + speed = AD_LINK_SPEED_BITMASK_1000MBPS; + break; + + default: + speed = 0; // unknown speed value from ethtool. shouldn't happen + break; + } + } + + dprintk("Port %d Received link speed %d update from adapter\n", port->actor_port_number, speed); + return speed; +} + +/** + * __get_duplex - get a port's duplex + * @port: the port we're looking at + * + * Return @port's duplex in 802.3ad bitmask format. i.e.: + * 0x01 if in full duplex + * 0x00 otherwise + */ +static u8 __get_duplex(struct port *port) +{ + struct slave *slave = port->slave; + + u8 retval; + + // handling a special case: when the configuration starts with + // link down, it sets the duplex to 0. + if (slave->link != BOND_LINK_UP) { + retval=0x0; + } else { + switch (slave->duplex) { + case DUPLEX_FULL: + retval=0x1; + dprintk("Port %d Received status full duplex update from adapter\n", port->actor_port_number); + break; + case DUPLEX_HALF: + default: + retval=0x0; + dprintk("Port %d Received status NOT full duplex update from adapter\n", port->actor_port_number); + break; + } + } + return retval; +} + +/** + * __initialize_port_locks - initialize a port's RX machine spinlock + * @port: the port we're looking at + * + */ +static inline void __initialize_port_locks(struct port *port) +{ + // make sure it isn't called twice + spin_lock_init(&(SLAVE_AD_INFO(port->slave).rx_machine_lock)); +} + +//conversions +/** + * __ntohs_lacpdu - convert the contents of a LACPDU to host byte order + * @lacpdu: the speicifed lacpdu + * + * For each multi-byte field in the lacpdu, convert its content + */ +static void __ntohs_lacpdu(struct lacpdu *lacpdu) +{ + if (lacpdu) { + lacpdu->actor_system_priority = ntohs(lacpdu->actor_system_priority); + lacpdu->actor_key = ntohs(lacpdu->actor_key); + lacpdu->actor_port_priority = ntohs(lacpdu->actor_port_priority); + lacpdu->actor_port = ntohs(lacpdu->actor_port); + lacpdu->partner_system_priority = ntohs(lacpdu->partner_system_priority); + lacpdu->partner_key = ntohs(lacpdu->partner_key); + lacpdu->partner_port_priority = ntohs(lacpdu->partner_port_priority); + lacpdu->partner_port = ntohs(lacpdu->partner_port); + lacpdu->collector_max_delay = ntohs(lacpdu->collector_max_delay); + } +} + +/** + * __ad_timer_to_ticks - convert a given timer type to AD module ticks + * @timer_type: which timer to operate + * @par: timer parameter. see below + * + * If @timer_type is %current_while_timer, @par indicates long/short timer. + * If @timer_type is %periodic_timer, @par is one of %FAST_PERIODIC_TIME, + * %SLOW_PERIODIC_TIME. + */ +static u16 __ad_timer_to_ticks(u16 timer_type, u16 par) +{ + u16 retval=0; //to silence the compiler + + switch (timer_type) { + case AD_CURRENT_WHILE_TIMER: // for rx machine usage + if (par) { // for short or long timeout + retval = (AD_SHORT_TIMEOUT_TIME*ad_ticks_per_sec); // short timeout + } else { + retval = (AD_LONG_TIMEOUT_TIME*ad_ticks_per_sec); // long timeout + } + break; + case AD_ACTOR_CHURN_TIMER: // for local churn machine + retval = (AD_CHURN_DETECTION_TIME*ad_ticks_per_sec); + break; + case AD_PERIODIC_TIMER: // for periodic machine + retval = (par*ad_ticks_per_sec); // long timeout + break; + case AD_PARTNER_CHURN_TIMER: // for remote churn machine + retval = (AD_CHURN_DETECTION_TIME*ad_ticks_per_sec); + break; + case AD_WAIT_WHILE_TIMER: // for selection machine + retval = (AD_AGGREGATE_WAIT_TIME*ad_ticks_per_sec); + break; + } + return retval; +} + + +///////////////////////////////////////////////////////////////////////////////// +// ================= ad_rx_machine helper functions ================== +///////////////////////////////////////////////////////////////////////////////// + +/** + * __record_pdu - record parameters from a received lacpdu + * @lacpdu: the lacpdu we've received + * @port: the port we're looking at + * + * Record the parameter values for the Actor carried in a received lacpdu as + * the current partner operational parameter values and sets + * actor_oper_port_state.defaulted to FALSE. + */ +static void __record_pdu(struct lacpdu *lacpdu, struct port *port) +{ + // validate lacpdu and port + if (lacpdu && port) { + // record the new parameter values for the partner operational + port->partner_oper_port_number = lacpdu->actor_port; + port->partner_oper_port_priority = lacpdu->actor_port_priority; + port->partner_oper_system = lacpdu->actor_system; + port->partner_oper_system_priority = lacpdu->actor_system_priority; + port->partner_oper_key = lacpdu->actor_key; + // zero partener's lase states + port->partner_oper_port_state = 0; + port->partner_oper_port_state |= (lacpdu->actor_state & AD_STATE_LACP_ACTIVITY); + port->partner_oper_port_state |= (lacpdu->actor_state & AD_STATE_LACP_TIMEOUT); + port->partner_oper_port_state |= (lacpdu->actor_state & AD_STATE_AGGREGATION); + port->partner_oper_port_state |= (lacpdu->actor_state & AD_STATE_SYNCHRONIZATION); + port->partner_oper_port_state |= (lacpdu->actor_state & AD_STATE_COLLECTING); + port->partner_oper_port_state |= (lacpdu->actor_state & AD_STATE_DISTRIBUTING); + port->partner_oper_port_state |= (lacpdu->actor_state & AD_STATE_DEFAULTED); + port->partner_oper_port_state |= (lacpdu->actor_state & AD_STATE_EXPIRED); + + // set actor_oper_port_state.defaulted to FALSE + port->actor_oper_port_state &= ~AD_STATE_DEFAULTED; + + // set the partner sync. to on if the partner is sync. and the port is matched + if ((port->sm_vars & AD_PORT_MATCHED) && (lacpdu->actor_state & AD_STATE_SYNCHRONIZATION)) { + port->partner_oper_port_state |= AD_STATE_SYNCHRONIZATION; + } else { + port->partner_oper_port_state &= ~AD_STATE_SYNCHRONIZATION; + } + } +} + +/** + * __record_default - record default parameters + * @port: the port we're looking at + * + * This function records the default parameter values for the partner carried + * in the Partner Admin parameters as the current partner operational parameter + * values and sets actor_oper_port_state.defaulted to TRUE. + */ +static void __record_default(struct port *port) +{ + // validate the port + if (port) { + // record the partner admin parameters + port->partner_oper_port_number = port->partner_admin_port_number; + port->partner_oper_port_priority = port->partner_admin_port_priority; + port->partner_oper_system = port->partner_admin_system; + port->partner_oper_system_priority = port->partner_admin_system_priority; + port->partner_oper_key = port->partner_admin_key; + port->partner_oper_port_state = port->partner_admin_port_state; + + // set actor_oper_port_state.defaulted to true + port->actor_oper_port_state |= AD_STATE_DEFAULTED; + } +} + +/** + * __update_selected - update a port's Selected variable from a received lacpdu + * @lacpdu: the lacpdu we've received + * @port: the port we're looking at + * + * Update the value of the selected variable, using parameter values from a + * newly received lacpdu. The parameter values for the Actor carried in the + * received PDU are compared with the corresponding operational parameter + * values for the ports partner. If one or more of the comparisons shows that + * the value(s) received in the PDU differ from the current operational values, + * then selected is set to FALSE and actor_oper_port_state.synchronization is + * set to out_of_sync. Otherwise, selected remains unchanged. + */ +static void __update_selected(struct lacpdu *lacpdu, struct port *port) +{ + // validate lacpdu and port + if (lacpdu && port) { + // check if any parameter is different + if ((lacpdu->actor_port != port->partner_oper_port_number) || + (lacpdu->actor_port_priority != port->partner_oper_port_priority) || + MAC_ADDRESS_COMPARE(&(lacpdu->actor_system), &(port->partner_oper_system)) || + (lacpdu->actor_system_priority != port->partner_oper_system_priority) || + (lacpdu->actor_key != port->partner_oper_key) || + ((lacpdu->actor_state & AD_STATE_AGGREGATION) != (port->partner_oper_port_state & AD_STATE_AGGREGATION)) + ) { + // update the state machine Selected variable + port->sm_vars &= ~AD_PORT_SELECTED; + } + } +} + +/** + * __update_default_selected - update a port's Selected variable from Partner + * @port: the port we're looking at + * + * This function updates the value of the selected variable, using the partner + * administrative parameter values. The administrative values are compared with + * the corresponding operational parameter values for the partner. If one or + * more of the comparisons shows that the administrative value(s) differ from + * the current operational values, then Selected is set to FALSE and + * actor_oper_port_state.synchronization is set to OUT_OF_SYNC. Otherwise, + * Selected remains unchanged. + */ +static void __update_default_selected(struct port *port) +{ + // validate the port + if (port) { + // check if any parameter is different + if ((port->partner_admin_port_number != port->partner_oper_port_number) || + (port->partner_admin_port_priority != port->partner_oper_port_priority) || + MAC_ADDRESS_COMPARE(&(port->partner_admin_system), &(port->partner_oper_system)) || + (port->partner_admin_system_priority != port->partner_oper_system_priority) || + (port->partner_admin_key != port->partner_oper_key) || + ((port->partner_admin_port_state & AD_STATE_AGGREGATION) != (port->partner_oper_port_state & AD_STATE_AGGREGATION)) + ) { + // update the state machine Selected variable + port->sm_vars &= ~AD_PORT_SELECTED; + } + } +} + +/** + * __choose_matched - update a port's matched variable from a received lacpdu + * @lacpdu: the lacpdu we've received + * @port: the port we're looking at + * + * Update the value of the matched variable, using parameter values from a + * newly received lacpdu. Parameter values for the partner carried in the + * received PDU are compared with the corresponding operational parameter + * values for the actor. Matched is set to TRUE if all of these parameters + * match and the PDU parameter partner_state.aggregation has the same value as + * actor_oper_port_state.aggregation and lacp will actively maintain the link + * in the aggregation. Matched is also set to TRUE if the value of + * actor_state.aggregation in the received PDU is set to FALSE, i.e., indicates + * an individual link and lacp will actively maintain the link. Otherwise, + * matched is set to FALSE. LACP is considered to be actively maintaining the + * link if either the PDU's actor_state.lacp_activity variable is TRUE or both + * the actor's actor_oper_port_state.lacp_activity and the PDU's + * partner_state.lacp_activity variables are TRUE. + */ +static void __choose_matched(struct lacpdu *lacpdu, struct port *port) +{ + // validate lacpdu and port + if (lacpdu && port) { + // check if all parameters are alike + if (((lacpdu->partner_port == port->actor_port_number) && + (lacpdu->partner_port_priority == port->actor_port_priority) && + !MAC_ADDRESS_COMPARE(&(lacpdu->partner_system), &(port->actor_system)) && + (lacpdu->partner_system_priority == port->actor_system_priority) && + (lacpdu->partner_key == port->actor_oper_port_key) && + ((lacpdu->partner_state & AD_STATE_AGGREGATION) == (port->actor_oper_port_state & AD_STATE_AGGREGATION))) || + // or this is individual link(aggregation == FALSE) + ((lacpdu->actor_state & AD_STATE_AGGREGATION) == 0) + ) { + // update the state machine Matched variable + port->sm_vars |= AD_PORT_MATCHED; + } else { + port->sm_vars &= ~AD_PORT_MATCHED; + } + } +} + +/** + * __update_ntt - update a port's ntt variable from a received lacpdu + * @lacpdu: the lacpdu we've received + * @port: the port we're looking at + * + * Updates the value of the ntt variable, using parameter values from a newly + * received lacpdu. The parameter values for the partner carried in the + * received PDU are compared with the corresponding operational parameter + * values for the Actor. If one or more of the comparisons shows that the + * value(s) received in the PDU differ from the current operational values, + * then ntt is set to TRUE. Otherwise, ntt remains unchanged. + */ +static void __update_ntt(struct lacpdu *lacpdu, struct port *port) +{ + // validate lacpdu and port + if (lacpdu && port) { + // check if any parameter is different + if ((lacpdu->partner_port != port->actor_port_number) || + (lacpdu->partner_port_priority != port->actor_port_priority) || + MAC_ADDRESS_COMPARE(&(lacpdu->partner_system), &(port->actor_system)) || + (lacpdu->partner_system_priority != port->actor_system_priority) || + (lacpdu->partner_key != port->actor_oper_port_key) || + ((lacpdu->partner_state & AD_STATE_LACP_ACTIVITY) != (port->actor_oper_port_state & AD_STATE_LACP_ACTIVITY)) || + ((lacpdu->partner_state & AD_STATE_LACP_TIMEOUT) != (port->actor_oper_port_state & AD_STATE_LACP_TIMEOUT)) || + ((lacpdu->partner_state & AD_STATE_SYNCHRONIZATION) != (port->actor_oper_port_state & AD_STATE_SYNCHRONIZATION)) || + ((lacpdu->partner_state & AD_STATE_AGGREGATION) != (port->actor_oper_port_state & AD_STATE_AGGREGATION)) + ) { + // set ntt to be TRUE + port->ntt = 1; + } + } +} + +/** + * __attach_bond_to_agg + * @port: the port we're looking at + * + * Handle the attaching of the port's control parser/multiplexer and the + * aggregator. This function does nothing since the parser/multiplexer of the + * receive and the parser/multiplexer of the aggregator are already combined. + */ +static void __attach_bond_to_agg(struct port *port) +{ + port=NULL; // just to satisfy the compiler + // This function does nothing since the parser/multiplexer of the receive + // and the parser/multiplexer of the aggregator are already combined +} + +/** + * __detach_bond_from_agg + * @port: the port we're looking at + * + * Handle the detaching of the port's control parser/multiplexer from the + * aggregator. This function does nothing since the parser/multiplexer of the + * receive and the parser/multiplexer of the aggregator are already combined. + */ +static void __detach_bond_from_agg(struct port *port) +{ + port=NULL; // just to satisfy the compiler + // This function does nothing sience the parser/multiplexer of the receive + // and the parser/multiplexer of the aggregator are already combined +} + +/** + * __agg_ports_are_ready - check if all ports in an aggregator are ready + * @aggregator: the aggregator we're looking at + * + */ +static int __agg_ports_are_ready(struct aggregator *aggregator) +{ + struct port *port; + int retval = 1; + + if (aggregator) { + // scan all ports in this aggregator to verfy if they are all ready + for (port=aggregator->lag_ports; port; port=port->next_port_in_aggregator) { + if (!(port->sm_vars & AD_PORT_READY_N)) { + retval = 0; + break; + } + } + } + + return retval; +} + +/** + * __set_agg_ports_ready - set value of Ready bit in all ports of an aggregator + * @aggregator: the aggregator we're looking at + * @val: Should the ports' ready bit be set on or off + * + */ +static void __set_agg_ports_ready(struct aggregator *aggregator, int val) +{ + struct port *port; + + for (port=aggregator->lag_ports; port; port=port->next_port_in_aggregator) { + if (val) { + port->sm_vars |= AD_PORT_READY; + } else { + port->sm_vars &= ~AD_PORT_READY; + } + } +} + +/** + * __get_agg_bandwidth - get the total bandwidth of an aggregator + * @aggregator: the aggregator we're looking at + * + */ +static u32 __get_agg_bandwidth(struct aggregator *aggregator) +{ + u32 bandwidth=0; + u32 basic_speed; + + if (aggregator->num_of_ports) { + basic_speed = __get_link_speed(aggregator->lag_ports); + switch (basic_speed) { + case AD_LINK_SPEED_BITMASK_1MBPS: + bandwidth = aggregator->num_of_ports; + break; + case AD_LINK_SPEED_BITMASK_10MBPS: + bandwidth = aggregator->num_of_ports * 10; + break; + case AD_LINK_SPEED_BITMASK_100MBPS: + bandwidth = aggregator->num_of_ports * 100; + break; + case AD_LINK_SPEED_BITMASK_1000MBPS: + bandwidth = aggregator->num_of_ports * 1000; + break; + default: + bandwidth=0; // to silent the compilor .... + } + } + return bandwidth; +} + +/** + * __get_active_agg - get the current active aggregator + * @aggregator: the aggregator we're looking at + * + */ +static struct aggregator *__get_active_agg(struct aggregator *aggregator) +{ + struct aggregator *retval = NULL; + + for (; aggregator; aggregator = __get_next_agg(aggregator)) { + if (aggregator->is_active) { + retval = aggregator; + break; + } + } + + return retval; +} + +/** + * __update_lacpdu_from_port - update a port's lacpdu fields + * @port: the port we're looking at + * + */ +static inline void __update_lacpdu_from_port(struct port *port) +{ + struct lacpdu *lacpdu = &port->lacpdu; + + /* update current actual Actor parameters */ + /* lacpdu->subtype initialized + * lacpdu->version_number initialized + * lacpdu->tlv_type_actor_info initialized + * lacpdu->actor_information_length initialized + */ + + lacpdu->actor_system_priority = port->actor_system_priority; + lacpdu->actor_system = port->actor_system; + lacpdu->actor_key = port->actor_oper_port_key; + lacpdu->actor_port_priority = port->actor_port_priority; + lacpdu->actor_port = port->actor_port_number; + lacpdu->actor_state = port->actor_oper_port_state; + + /* lacpdu->reserved_3_1 initialized + * lacpdu->tlv_type_partner_info initialized + * lacpdu->partner_information_length initialized + */ + + lacpdu->partner_system_priority = port->partner_oper_system_priority; + lacpdu->partner_system = port->partner_oper_system; + lacpdu->partner_key = port->partner_oper_key; + lacpdu->partner_port_priority = port->partner_oper_port_priority; + lacpdu->partner_port = port->partner_oper_port_number; + lacpdu->partner_state = port->partner_oper_port_state; + + /* lacpdu->reserved_3_2 initialized + * lacpdu->tlv_type_collector_info initialized + * lacpdu->collector_information_length initialized + * collector_max_delay initialized + * reserved_12[12] initialized + * tlv_type_terminator initialized + * terminator_length initialized + * reserved_50[50] initialized + */ + + /* Convert all non u8 parameters to Big Endian for transmit */ + __ntohs_lacpdu(lacpdu); +} + +////////////////////////////////////////////////////////////////////////////////////// +// ================= main 802.3ad protocol code ====================================== +////////////////////////////////////////////////////////////////////////////////////// + +/** + * ad_lacpdu_send - send out a lacpdu packet on a given port + * @port: the port we're looking at + * + * Returns: 0 on success + * < 0 on error + */ +static int ad_lacpdu_send(struct port *port) +{ + struct slave *slave = port->slave; + struct sk_buff *skb; + struct lacpdu_header *lacpdu_header; + int length = sizeof(struct lacpdu_header); + struct mac_addr lacpdu_multicast_address = AD_MULTICAST_LACPDU_ADDR; + + skb = dev_alloc_skb(length); + if (!skb) { + return -ENOMEM; + } + + skb->dev = slave->dev; + skb->mac.raw = skb->data; + skb->nh.raw = skb->data + ETH_HLEN; + skb->protocol = PKT_TYPE_LACPDU; + skb->priority = TC_PRIO_CONTROL; + + lacpdu_header = (struct lacpdu_header *)skb_put(skb, length); + + lacpdu_header->ad_header.destination_address = lacpdu_multicast_address; + /* Note: source addres is set to be the member's PERMANENT address, because we use it + to identify loopback lacpdus in receive. */ + lacpdu_header->ad_header.source_address = *((struct mac_addr *)(slave->perm_hwaddr)); + lacpdu_header->ad_header.length_type = PKT_TYPE_LACPDU; + + lacpdu_header->lacpdu = port->lacpdu; // struct copy + + dev_queue_xmit(skb); + + return 0; +} + +/** + * ad_marker_send - send marker information/response on a given port + * @port: the port we're looking at + * @marker: marker data to send + * + * Returns: 0 on success + * < 0 on error + */ +static int ad_marker_send(struct port *port, struct marker *marker) +{ + struct slave *slave = port->slave; + struct sk_buff *skb; + struct marker_header *marker_header; + int length = sizeof(struct marker_header); + struct mac_addr lacpdu_multicast_address = AD_MULTICAST_LACPDU_ADDR; + + skb = dev_alloc_skb(length + 16); + if (!skb) { + return -ENOMEM; + } + + skb_reserve(skb, 16); + + skb->dev = slave->dev; + skb->mac.raw = skb->data; + skb->nh.raw = skb->data + ETH_HLEN; + skb->protocol = PKT_TYPE_LACPDU; + + marker_header = (struct marker_header *)skb_put(skb, length); + + marker_header->ad_header.destination_address = lacpdu_multicast_address; + /* Note: source addres is set to be the member's PERMANENT address, because we use it + to identify loopback MARKERs in receive. */ + marker_header->ad_header.source_address = *((struct mac_addr *)(slave->perm_hwaddr)); + marker_header->ad_header.length_type = PKT_TYPE_LACPDU; + + marker_header->marker = *marker; // struct copy + + dev_queue_xmit(skb); + + return 0; +} + +/** + * ad_mux_machine - handle a port's mux state machine + * @port: the port we're looking at + * + */ +static void ad_mux_machine(struct port *port) +{ + mux_states_t last_state; + + // keep current State Machine state to compare later if it was changed + last_state = port->sm_mux_state; + + if (port->sm_vars & AD_PORT_BEGIN) { + port->sm_mux_state = AD_MUX_DETACHED; // next state + } else { + switch (port->sm_mux_state) { + case AD_MUX_DETACHED: + if ((port->sm_vars & AD_PORT_SELECTED) || (port->sm_vars & AD_PORT_STANDBY)) { // if SELECTED or STANDBY + port->sm_mux_state = AD_MUX_WAITING; // next state + } + break; + case AD_MUX_WAITING: + // if SELECTED == FALSE return to DETACH state + if (!(port->sm_vars & AD_PORT_SELECTED)) { // if UNSELECTED + port->sm_vars &= ~AD_PORT_READY_N; + // in order to withhold the Selection Logic to check all ports READY_N value + // every callback cycle to update ready variable, we check READY_N and update READY here + __set_agg_ports_ready(port->aggregator, __agg_ports_are_ready(port->aggregator)); + port->sm_mux_state = AD_MUX_DETACHED; // next state + break; + } + + // check if the wait_while_timer expired + if (port->sm_mux_timer_counter && !(--port->sm_mux_timer_counter)) { + port->sm_vars |= AD_PORT_READY_N; + } + + // in order to withhold the selection logic to check all ports READY_N value + // every callback cycle to update ready variable, we check READY_N and update READY here + __set_agg_ports_ready(port->aggregator, __agg_ports_are_ready(port->aggregator)); + + // if the wait_while_timer expired, and the port is in READY state, move to ATTACHED state + if ((port->sm_vars & AD_PORT_READY) && !port->sm_mux_timer_counter) { + port->sm_mux_state = AD_MUX_ATTACHED; // next state + } + break; + case AD_MUX_ATTACHED: + // check also if agg_select_timer expired(so the edable port will take place only after this timer) + if ((port->sm_vars & AD_PORT_SELECTED) && (port->partner_oper_port_state & AD_STATE_SYNCHRONIZATION) && !__check_agg_selection_timer(port)) { + port->sm_mux_state = AD_MUX_COLLECTING_DISTRIBUTING;// next state + } else if (!(port->sm_vars & AD_PORT_SELECTED) || (port->sm_vars & AD_PORT_STANDBY)) { // if UNSELECTED or STANDBY + port->sm_vars &= ~AD_PORT_READY_N; + // in order to withhold the selection logic to check all ports READY_N value + // every callback cycle to update ready variable, we check READY_N and update READY here + __set_agg_ports_ready(port->aggregator, __agg_ports_are_ready(port->aggregator)); + port->sm_mux_state = AD_MUX_DETACHED;// next state + } + break; + case AD_MUX_COLLECTING_DISTRIBUTING: + if (!(port->sm_vars & AD_PORT_SELECTED) || (port->sm_vars & AD_PORT_STANDBY) || + !(port->partner_oper_port_state & AD_STATE_SYNCHRONIZATION) + ) { + port->sm_mux_state = AD_MUX_ATTACHED;// next state + + } else { + // if port state hasn't changed make + // sure that a collecting distributing + // port in an active aggregator is enabled + if (port->aggregator && + port->aggregator->is_active && + !__port_is_enabled(port)) { + + __enable_port(port); + } + } + break; + default: //to silence the compiler + break; + } + } + + // check if the state machine was changed + if (port->sm_mux_state != last_state) { + dprintk("Mux Machine: Port=%d, Last State=%d, Curr State=%d\n", port->actor_port_number, last_state, port->sm_mux_state); + switch (port->sm_mux_state) { + case AD_MUX_DETACHED: + __detach_bond_from_agg(port); + port->actor_oper_port_state &= ~AD_STATE_SYNCHRONIZATION; + ad_disable_collecting_distributing(port); + port->actor_oper_port_state &= ~AD_STATE_COLLECTING; + port->actor_oper_port_state &= ~AD_STATE_DISTRIBUTING; + port->ntt = 1; + break; + case AD_MUX_WAITING: + port->sm_mux_timer_counter = __ad_timer_to_ticks(AD_WAIT_WHILE_TIMER, 0); + break; + case AD_MUX_ATTACHED: + __attach_bond_to_agg(port); + port->actor_oper_port_state |= AD_STATE_SYNCHRONIZATION; + port->actor_oper_port_state &= ~AD_STATE_COLLECTING; + port->actor_oper_port_state &= ~AD_STATE_DISTRIBUTING; + ad_disable_collecting_distributing(port); + port->ntt = 1; + break; + case AD_MUX_COLLECTING_DISTRIBUTING: + port->actor_oper_port_state |= AD_STATE_COLLECTING; + port->actor_oper_port_state |= AD_STATE_DISTRIBUTING; + ad_enable_collecting_distributing(port); + port->ntt = 1; + break; + default: //to silence the compiler + break; + } + } +} + +/** + * ad_rx_machine - handle a port's rx State Machine + * @lacpdu: the lacpdu we've received + * @port: the port we're looking at + * + * If lacpdu arrived, stop previous timer (if exists) and set the next state as + * CURRENT. If timer expired set the state machine in the proper state. + * In other cases, this function checks if we need to switch to other state. + */ +static void ad_rx_machine(struct lacpdu *lacpdu, struct port *port) +{ + rx_states_t last_state; + + // Lock to prevent 2 instances of this function to run simultaneously(rx interrupt and periodic machine callback) + __get_rx_machine_lock(port); + + // keep current State Machine state to compare later if it was changed + last_state = port->sm_rx_state; + + // check if state machine should change state + // first, check if port was reinitialized + if (port->sm_vars & AD_PORT_BEGIN) { + port->sm_rx_state = AD_RX_INITIALIZE; // next state + } + // check if port is not enabled + else if (!(port->sm_vars & AD_PORT_BEGIN) && !port->is_enabled && !(port->sm_vars & AD_PORT_MOVED)) { + port->sm_rx_state = AD_RX_PORT_DISABLED; // next state + } + // check if new lacpdu arrived + else if (lacpdu && ((port->sm_rx_state == AD_RX_EXPIRED) || (port->sm_rx_state == AD_RX_DEFAULTED) || (port->sm_rx_state == AD_RX_CURRENT))) { + port->sm_rx_timer_counter = 0; // zero timer + port->sm_rx_state = AD_RX_CURRENT; + } else { + // if timer is on, and if it is expired + if (port->sm_rx_timer_counter && !(--port->sm_rx_timer_counter)) { + switch (port->sm_rx_state) { + case AD_RX_EXPIRED: + port->sm_rx_state = AD_RX_DEFAULTED; // next state + break; + case AD_RX_CURRENT: + port->sm_rx_state = AD_RX_EXPIRED; // next state + break; + default: //to silence the compiler + break; + } + } else { + // if no lacpdu arrived and no timer is on + switch (port->sm_rx_state) { + case AD_RX_PORT_DISABLED: + if (port->sm_vars & AD_PORT_MOVED) { + port->sm_rx_state = AD_RX_INITIALIZE; // next state + } else if (port->is_enabled && (port->sm_vars & AD_PORT_LACP_ENABLED)) { + port->sm_rx_state = AD_RX_EXPIRED; // next state + } else if (port->is_enabled && ((port->sm_vars & AD_PORT_LACP_ENABLED) == 0)) { + port->sm_rx_state = AD_RX_LACP_DISABLED; // next state + } + break; + default: //to silence the compiler + break; + + } + } + } + + // check if the State machine was changed or new lacpdu arrived + if ((port->sm_rx_state != last_state) || (lacpdu)) { + dprintk("Rx Machine: Port=%d, Last State=%d, Curr State=%d\n", port->actor_port_number, last_state, port->sm_rx_state); + switch (port->sm_rx_state) { + case AD_RX_INITIALIZE: + if (!(port->actor_oper_port_key & AD_DUPLEX_KEY_BITS)) { + port->sm_vars &= ~AD_PORT_LACP_ENABLED; + } else { + port->sm_vars |= AD_PORT_LACP_ENABLED; + } + port->sm_vars &= ~AD_PORT_SELECTED; + __record_default(port); + port->actor_oper_port_state &= ~AD_STATE_EXPIRED; + port->sm_vars &= ~AD_PORT_MOVED; + port->sm_rx_state = AD_RX_PORT_DISABLED; // next state + + /*- Fall Through -*/ + + case AD_RX_PORT_DISABLED: + port->sm_vars &= ~AD_PORT_MATCHED; + break; + case AD_RX_LACP_DISABLED: + port->sm_vars &= ~AD_PORT_SELECTED; + __record_default(port); + port->partner_oper_port_state &= ~AD_STATE_AGGREGATION; + port->sm_vars |= AD_PORT_MATCHED; + port->actor_oper_port_state &= ~AD_STATE_EXPIRED; + break; + case AD_RX_EXPIRED: + //Reset of the Synchronization flag. (Standard 43.4.12) + //This reset cause to disable this port in the COLLECTING_DISTRIBUTING state of the + //mux machine in case of EXPIRED even if LINK_DOWN didn't arrive for the port. + port->partner_oper_port_state &= ~AD_STATE_SYNCHRONIZATION; + port->sm_vars &= ~AD_PORT_MATCHED; + port->partner_oper_port_state |= AD_SHORT_TIMEOUT; + port->sm_rx_timer_counter = __ad_timer_to_ticks(AD_CURRENT_WHILE_TIMER, (u16)(AD_SHORT_TIMEOUT)); + port->actor_oper_port_state |= AD_STATE_EXPIRED; + break; + case AD_RX_DEFAULTED: + __update_default_selected(port); + __record_default(port); + port->sm_vars |= AD_PORT_MATCHED; + port->actor_oper_port_state &= ~AD_STATE_EXPIRED; + break; + case AD_RX_CURRENT: + // detect loopback situation + if (!MAC_ADDRESS_COMPARE(&(lacpdu->actor_system), &(port->actor_system))) { + // INFO_RECEIVED_LOOPBACK_FRAMES + printk(KERN_ERR DRV_NAME ": An illegal loopback occurred on adapter (%s)\n", + port->slave->dev->name); + printk(KERN_ERR "Check the configuration to verify that all Adapters " + "are connected to 802.3ad compliant switch ports\n"); + __release_rx_machine_lock(port); + return; + } + __update_selected(lacpdu, port); + __update_ntt(lacpdu, port); + __record_pdu(lacpdu, port); + __choose_matched(lacpdu, port); + port->sm_rx_timer_counter = __ad_timer_to_ticks(AD_CURRENT_WHILE_TIMER, (u16)(port->actor_oper_port_state & AD_STATE_LACP_TIMEOUT)); + port->actor_oper_port_state &= ~AD_STATE_EXPIRED; + // verify that if the aggregator is enabled, the port is enabled too. + //(because if the link goes down for a short time, the 802.3ad will not + // catch it, and the port will continue to be disabled) + if (port->aggregator && port->aggregator->is_active && !__port_is_enabled(port)) { + __enable_port(port); + } + break; + default: //to silence the compiler + break; + } + } + __release_rx_machine_lock(port); +} + +/** + * ad_tx_machine - handle a port's tx state machine + * @port: the port we're looking at + * + */ +static void ad_tx_machine(struct port *port) +{ + // check if tx timer expired, to verify that we do not send more than 3 packets per second + if (port->sm_tx_timer_counter && !(--port->sm_tx_timer_counter)) { + // check if there is something to send + if (port->ntt && (port->sm_vars & AD_PORT_LACP_ENABLED)) { + __update_lacpdu_from_port(port); + // send the lacpdu + if (ad_lacpdu_send(port) >= 0) { + dprintk("Sent LACPDU on port %d\n", port->actor_port_number); + // mark ntt as false, so it will not be sent again until demanded + port->ntt = 0; + } + } + // restart tx timer(to verify that we will not exceed AD_MAX_TX_IN_SECOND + port->sm_tx_timer_counter=ad_ticks_per_sec/AD_MAX_TX_IN_SECOND; + } +} + +/** + * ad_periodic_machine - handle a port's periodic state machine + * @port: the port we're looking at + * + * Turn ntt flag on priodically to perform periodic transmission of lacpdu's. + */ +static void ad_periodic_machine(struct port *port) +{ + periodic_states_t last_state; + + // keep current state machine state to compare later if it was changed + last_state = port->sm_periodic_state; + + // check if port was reinitialized + if (((port->sm_vars & AD_PORT_BEGIN) || !(port->sm_vars & AD_PORT_LACP_ENABLED) || !port->is_enabled) || + (!(port->actor_oper_port_state & AD_STATE_LACP_ACTIVITY) && !(port->partner_oper_port_state & AD_STATE_LACP_ACTIVITY)) + ) { + port->sm_periodic_state = AD_NO_PERIODIC; // next state + } + // check if state machine should change state + else if (port->sm_periodic_timer_counter) { + // check if periodic state machine expired + if (!(--port->sm_periodic_timer_counter)) { + // if expired then do tx + port->sm_periodic_state = AD_PERIODIC_TX; // next state + } else { + // If not expired, check if there is some new timeout parameter from the partner state + switch (port->sm_periodic_state) { + case AD_FAST_PERIODIC: + if (!(port->partner_oper_port_state & AD_STATE_LACP_TIMEOUT)) { + port->sm_periodic_state = AD_SLOW_PERIODIC; // next state + } + break; + case AD_SLOW_PERIODIC: + if ((port->partner_oper_port_state & AD_STATE_LACP_TIMEOUT)) { + // stop current timer + port->sm_periodic_timer_counter = 0; + port->sm_periodic_state = AD_PERIODIC_TX; // next state + } + break; + default: //to silence the compiler + break; + } + } + } else { + switch (port->sm_periodic_state) { + case AD_NO_PERIODIC: + port->sm_periodic_state = AD_FAST_PERIODIC; // next state + break; + case AD_PERIODIC_TX: + if (!(port->partner_oper_port_state & AD_STATE_LACP_TIMEOUT)) { + port->sm_periodic_state = AD_SLOW_PERIODIC; // next state + } else { + port->sm_periodic_state = AD_FAST_PERIODIC; // next state + } + break; + default: //to silence the compiler + break; + } + } + + // check if the state machine was changed + if (port->sm_periodic_state != last_state) { + dprintk("Periodic Machine: Port=%d, Last State=%d, Curr State=%d\n", port->actor_port_number, last_state, port->sm_periodic_state); + switch (port->sm_periodic_state) { + case AD_NO_PERIODIC: + port->sm_periodic_timer_counter = 0; // zero timer + break; + case AD_FAST_PERIODIC: + port->sm_periodic_timer_counter = __ad_timer_to_ticks(AD_PERIODIC_TIMER, (u16)(AD_FAST_PERIODIC_TIME))-1; // decrement 1 tick we lost in the PERIODIC_TX cycle + break; + case AD_SLOW_PERIODIC: + port->sm_periodic_timer_counter = __ad_timer_to_ticks(AD_PERIODIC_TIMER, (u16)(AD_SLOW_PERIODIC_TIME))-1; // decrement 1 tick we lost in the PERIODIC_TX cycle + break; + case AD_PERIODIC_TX: + port->ntt = 1; + break; + default: //to silence the compiler + break; + } + } +} + +/** + * ad_port_selection_logic - select aggregation groups + * @port: the port we're looking at + * + * Select aggregation groups, and assign each port for it's aggregetor. The + * selection logic is called in the inititalization (after all the handshkes), + * and after every lacpdu receive (if selected is off). + */ +static void ad_port_selection_logic(struct port *port) +{ + struct aggregator *aggregator, *free_aggregator = NULL, *temp_aggregator; + struct port *last_port = NULL, *curr_port; + int found = 0; + + // if the port is already Selected, do nothing + if (port->sm_vars & AD_PORT_SELECTED) { + return; + } + + // if the port is connected to other aggregator, detach it + if (port->aggregator) { + // detach the port from its former aggregator + temp_aggregator=port->aggregator; + for (curr_port=temp_aggregator->lag_ports; curr_port; last_port=curr_port, curr_port=curr_port->next_port_in_aggregator) { + if (curr_port == port) { + temp_aggregator->num_of_ports--; + if (!last_port) {// if it is the first port attached to the aggregator + temp_aggregator->lag_ports=port->next_port_in_aggregator; + } else {// not the first port attached to the aggregator + last_port->next_port_in_aggregator=port->next_port_in_aggregator; + } + + // clear the port's relations to this aggregator + port->aggregator = NULL; + port->next_port_in_aggregator=NULL; + port->actor_port_aggregator_identifier=0; + + dprintk("Port %d left LAG %d\n", port->actor_port_number, temp_aggregator->aggregator_identifier); + // if the aggregator is empty, clear its parameters, and set it ready to be attached + if (!temp_aggregator->lag_ports) { + ad_clear_agg(temp_aggregator); + } + break; + } + } + if (!curr_port) { // meaning: the port was related to an aggregator but was not on the aggregator port list + printk(KERN_WARNING DRV_NAME ": Warning: Port %d (on %s) was " + "related to aggregator %d but was not on its port list\n", + port->actor_port_number, port->slave->dev->name, + port->aggregator->aggregator_identifier); + } + } + // search on all aggregators for a suitable aggregator for this port + for (aggregator = __get_first_agg(port); aggregator; + aggregator = __get_next_agg(aggregator)) { + + // keep a free aggregator for later use(if needed) + if (!aggregator->lag_ports) { + if (!free_aggregator) { + free_aggregator=aggregator; + } + continue; + } + // check if current aggregator suits us + if (((aggregator->actor_oper_aggregator_key == port->actor_oper_port_key) && // if all parameters match AND + !MAC_ADDRESS_COMPARE(&(aggregator->partner_system), &(port->partner_oper_system)) && + (aggregator->partner_system_priority == port->partner_oper_system_priority) && + (aggregator->partner_oper_aggregator_key == port->partner_oper_key) + ) && + ((MAC_ADDRESS_COMPARE(&(port->partner_oper_system), &(null_mac_addr)) && // partner answers + !aggregator->is_individual) // but is not individual OR + ) + ) { + // attach to the founded aggregator + port->aggregator = aggregator; + port->actor_port_aggregator_identifier=port->aggregator->aggregator_identifier; + port->next_port_in_aggregator=aggregator->lag_ports; + port->aggregator->num_of_ports++; + aggregator->lag_ports=port; + dprintk("Port %d joined LAG %d(existing LAG)\n", port->actor_port_number, port->aggregator->aggregator_identifier); + + // mark this port as selected + port->sm_vars |= AD_PORT_SELECTED; + found = 1; + break; + } + } + + // the port couldn't find an aggregator - attach it to a new aggregator + if (!found) { + if (free_aggregator) { + // assign port a new aggregator + port->aggregator = free_aggregator; + port->actor_port_aggregator_identifier=port->aggregator->aggregator_identifier; + + // update the new aggregator's parameters + // if port was responsed from the end-user + if (port->actor_oper_port_key & AD_DUPLEX_KEY_BITS) {// if port is full duplex + port->aggregator->is_individual = 0; + } else { + port->aggregator->is_individual = 1; + } + + port->aggregator->actor_admin_aggregator_key = port->actor_admin_port_key; + port->aggregator->actor_oper_aggregator_key = port->actor_oper_port_key; + port->aggregator->partner_system=port->partner_oper_system; + port->aggregator->partner_system_priority = port->partner_oper_system_priority; + port->aggregator->partner_oper_aggregator_key = port->partner_oper_key; + port->aggregator->receive_state = 1; + port->aggregator->transmit_state = 1; + port->aggregator->lag_ports = port; + port->aggregator->num_of_ports++; + + // mark this port as selected + port->sm_vars |= AD_PORT_SELECTED; + + dprintk("Port %d joined LAG %d(new LAG)\n", port->actor_port_number, port->aggregator->aggregator_identifier); + } else { + printk(KERN_ERR DRV_NAME ": Port %d (on %s) did not find a suitable aggregator\n", + port->actor_port_number, port->slave->dev->name); + } + } + // if all aggregator's ports are READY_N == TRUE, set ready=TRUE in all aggregator's ports + // else set ready=FALSE in all aggregator's ports + __set_agg_ports_ready(port->aggregator, __agg_ports_are_ready(port->aggregator)); + + if (!__check_agg_selection_timer(port) && (aggregator = __get_first_agg(port))) { + ad_agg_selection_logic(aggregator); + } +} + +/** + * ad_agg_selection_logic - select an aggregation group for a team + * @aggregator: the aggregator we're looking at + * + * It is assumed that only one aggregator may be selected for a team. + * The logic of this function is to select (at first time) the aggregator with + * the most ports attached to it, and to reselect the active aggregator only if + * the previous aggregator has no more ports related to it. + * + * FIXME: this function MUST be called with the first agg in the bond, or + * __get_active_agg() won't work correctly. This function should be better + * called with the bond itself, and retrieve the first agg from it. + */ +static void ad_agg_selection_logic(struct aggregator *aggregator) +{ + struct aggregator *best_aggregator = NULL, *active_aggregator = NULL; + struct aggregator *last_active_aggregator = NULL, *origin_aggregator; + struct port *port; + u16 num_of_aggs=0; + + origin_aggregator = aggregator; + + //get current active aggregator + last_active_aggregator = __get_active_agg(aggregator); + + // search for the aggregator with the most ports attached to it. + do { + // count how many candidate lag's we have + if (aggregator->lag_ports) { + num_of_aggs++; + } + if (aggregator->is_active && !aggregator->is_individual && // if current aggregator is the active aggregator + MAC_ADDRESS_COMPARE(&(aggregator->partner_system), &(null_mac_addr))) { // and partner answers to 802.3ad PDUs + if (aggregator->num_of_ports) { // if any ports attached to the current aggregator + best_aggregator=NULL; // disregard the best aggregator that was chosen by now + break; // stop the selection of other aggregator if there are any ports attached to this active aggregator + } else { // no ports attached to this active aggregator + aggregator->is_active = 0; // mark this aggregator as not active anymore + } + } + if (aggregator->num_of_ports) { // if any ports attached + if (best_aggregator) { // if there is a candidte aggregator + //The reasons for choosing new best aggregator: + // 1. if current agg is NOT individual and the best agg chosen so far is individual OR + // current and best aggs are both individual or both not individual, AND + // 2a. current agg partner reply but best agg partner do not reply OR + // 2b. current agg partner reply OR current agg partner do not reply AND best agg partner also do not reply AND + // current has more ports/bandwidth, or same amount of ports but current has faster ports, THEN + // current agg become best agg so far + + //if current agg is NOT individual and the best agg chosen so far is individual change best_aggregator + if (!aggregator->is_individual && best_aggregator->is_individual) { + best_aggregator=aggregator; + } + // current and best aggs are both individual or both not individual + else if ((aggregator->is_individual && best_aggregator->is_individual) || + (!aggregator->is_individual && !best_aggregator->is_individual)) { + // current and best aggs are both individual or both not individual AND + // current agg partner reply but best agg partner do not reply + if ((MAC_ADDRESS_COMPARE(&(aggregator->partner_system), &(null_mac_addr)) && + !MAC_ADDRESS_COMPARE(&(best_aggregator->partner_system), &(null_mac_addr)))) { + best_aggregator=aggregator; + } + // current agg partner reply OR current agg partner do not reply AND best agg partner also do not reply + else if (! (!MAC_ADDRESS_COMPARE(&(aggregator->partner_system), &(null_mac_addr)) && + MAC_ADDRESS_COMPARE(&(best_aggregator->partner_system), &(null_mac_addr)))) { + if ((__get_agg_selection_mode(aggregator->lag_ports) == AD_BANDWIDTH)&& + (__get_agg_bandwidth(aggregator) > __get_agg_bandwidth(best_aggregator))) { + best_aggregator=aggregator; + } else if (__get_agg_selection_mode(aggregator->lag_ports) == AD_COUNT) { + if (((aggregator->num_of_ports > best_aggregator->num_of_ports) && + (aggregator->actor_oper_aggregator_key & AD_SPEED_KEY_BITS))|| + ((aggregator->num_of_ports == best_aggregator->num_of_ports) && + ((u16)(aggregator->actor_oper_aggregator_key & AD_SPEED_KEY_BITS) > + (u16)(best_aggregator->actor_oper_aggregator_key & AD_SPEED_KEY_BITS)))) { + best_aggregator=aggregator; + } + } + } + } + } else { + best_aggregator=aggregator; + } + } + aggregator->is_active = 0; // mark all aggregators as not active anymore + } while ((aggregator = __get_next_agg(aggregator))); + + // if we have new aggregator selected, don't replace the old aggregator if it has an answering partner, + // or if both old aggregator and new aggregator don't have answering partner + if (best_aggregator) { + if (last_active_aggregator && last_active_aggregator->lag_ports && last_active_aggregator->lag_ports->is_enabled && + (MAC_ADDRESS_COMPARE(&(last_active_aggregator->partner_system), &(null_mac_addr)) || // partner answers OR + (!MAC_ADDRESS_COMPARE(&(last_active_aggregator->partner_system), &(null_mac_addr)) && // both old and new + !MAC_ADDRESS_COMPARE(&(best_aggregator->partner_system), &(null_mac_addr)))) // partner do not answer + ) { + // if new aggregator has link, and old aggregator does not, replace old aggregator.(do nothing) + // -> don't replace otherwise. + if (!(!last_active_aggregator->actor_oper_aggregator_key && best_aggregator->actor_oper_aggregator_key)) { + best_aggregator=NULL; + last_active_aggregator->is_active = 1; // don't replace good old aggregator + + } + } + } + + // if there is new best aggregator, activate it + if (best_aggregator) { + for (aggregator = __get_first_agg(best_aggregator->lag_ports); + aggregator; + aggregator = __get_next_agg(aggregator)) { + + dprintk("Agg=%d; Ports=%d; a key=%d; p key=%d; Indiv=%d; Active=%d\n", + aggregator->aggregator_identifier, aggregator->num_of_ports, + aggregator->actor_oper_aggregator_key, aggregator->partner_oper_aggregator_key, + aggregator->is_individual, aggregator->is_active); + } + + // check if any partner replys + if (best_aggregator->is_individual) { + printk(KERN_WARNING DRV_NAME ": Warning: No 802.3ad response from the link partner " + "for any adapters in the bond\n"); + } + + // check if there are more than one aggregator + if (num_of_aggs > 1) { + dprintk("Warning: More than one Link Aggregation Group was " + "found in the bond. Only one group will function in the bond\n"); + } + + best_aggregator->is_active = 1; + dprintk("LAG %d choosed as the active LAG\n", best_aggregator->aggregator_identifier); + dprintk("Agg=%d; Ports=%d; a key=%d; p key=%d; Indiv=%d; Active=%d\n", + best_aggregator->aggregator_identifier, best_aggregator->num_of_ports, + best_aggregator->actor_oper_aggregator_key, best_aggregator->partner_oper_aggregator_key, + best_aggregator->is_individual, best_aggregator->is_active); + + // disable the ports that were related to the former active_aggregator + if (last_active_aggregator) { + for (port=last_active_aggregator->lag_ports; port; port=port->next_port_in_aggregator) { + __disable_port(port); + } + } + } + + // if the selected aggregator is of join individuals(partner_system is NULL), enable their ports + active_aggregator = __get_active_agg(origin_aggregator); + + if (active_aggregator) { + if (!MAC_ADDRESS_COMPARE(&(active_aggregator->partner_system), &(null_mac_addr))) { + for (port=active_aggregator->lag_ports; port; port=port->next_port_in_aggregator) { + __enable_port(port); + } + } + } +} + +/** + * ad_clear_agg - clear a given aggregator's parameters + * @aggregator: the aggregator we're looking at + * + */ +static void ad_clear_agg(struct aggregator *aggregator) +{ + if (aggregator) { + aggregator->is_individual = 0; + aggregator->actor_admin_aggregator_key = 0; + aggregator->actor_oper_aggregator_key = 0; + aggregator->partner_system = null_mac_addr; + aggregator->partner_system_priority = 0; + aggregator->partner_oper_aggregator_key = 0; + aggregator->receive_state = 0; + aggregator->transmit_state = 0; + aggregator->lag_ports = NULL; + aggregator->is_active = 0; + aggregator->num_of_ports = 0; + dprintk("LAG %d was cleared\n", aggregator->aggregator_identifier); + } +} + +/** + * ad_initialize_agg - initialize a given aggregator's parameters + * @aggregator: the aggregator we're looking at + * + */ +static void ad_initialize_agg(struct aggregator *aggregator) +{ + if (aggregator) { + ad_clear_agg(aggregator); + + aggregator->aggregator_mac_address = null_mac_addr; + aggregator->aggregator_identifier = 0; + aggregator->slave = NULL; + } +} + +/** + * ad_initialize_port - initialize a given port's parameters + * @aggregator: the aggregator we're looking at + * @lacp_fast: boolean. whether fast periodic should be used + * + */ +static void ad_initialize_port(struct port *port, int lacp_fast) +{ + if (port) { + port->actor_port_number = 1; + port->actor_port_priority = 0xff; + port->actor_system = null_mac_addr; + port->actor_system_priority = 0xffff; + port->actor_port_aggregator_identifier = 0; + port->ntt = 0; + port->actor_admin_port_key = 1; + port->actor_oper_port_key = 1; + port->actor_admin_port_state = AD_STATE_AGGREGATION | AD_STATE_LACP_ACTIVITY; + port->actor_oper_port_state = AD_STATE_AGGREGATION | AD_STATE_LACP_ACTIVITY; + + if (lacp_fast) { + port->actor_oper_port_state |= AD_STATE_LACP_TIMEOUT; + } + + port->partner_admin_system = null_mac_addr; + port->partner_oper_system = null_mac_addr; + port->partner_admin_system_priority = 0xffff; + port->partner_oper_system_priority = 0xffff; + port->partner_admin_key = 1; + port->partner_oper_key = 1; + port->partner_admin_port_number = 1; + port->partner_oper_port_number = 1; + port->partner_admin_port_priority = 0xff; + port->partner_oper_port_priority = 0xff; + port->partner_admin_port_state = 1; + port->partner_oper_port_state = 1; + port->is_enabled = 1; + // ****** private parameters ****** + port->sm_vars = 0x3; + port->sm_rx_state = 0; + port->sm_rx_timer_counter = 0; + port->sm_periodic_state = 0; + port->sm_periodic_timer_counter = 0; + port->sm_mux_state = 0; + port->sm_mux_timer_counter = 0; + port->sm_tx_state = 0; + port->sm_tx_timer_counter = 0; + port->slave = NULL; + port->aggregator = NULL; + port->next_port_in_aggregator = NULL; + port->transaction_id = 0; + + ad_initialize_lacpdu(&(port->lacpdu)); + } +} + +/** + * ad_enable_collecting_distributing - enable a port's transmit/receive + * @port: the port we're looking at + * + * Enable @port if it's in an active aggregator + */ +static void ad_enable_collecting_distributing(struct port *port) +{ + if (port->aggregator->is_active) { + dprintk("Enabling port %d(LAG %d)\n", port->actor_port_number, port->aggregator->aggregator_identifier); + __enable_port(port); + } +} + +/** + * ad_disable_collecting_distributing - disable a port's transmit/receive + * @port: the port we're looking at + * + */ +static void ad_disable_collecting_distributing(struct port *port) +{ + if (port->aggregator && MAC_ADDRESS_COMPARE(&(port->aggregator->partner_system), &(null_mac_addr))) { + dprintk("Disabling port %d(LAG %d)\n", port->actor_port_number, port->aggregator->aggregator_identifier); + __disable_port(port); + } +} + +#if 0 +/** + * ad_marker_info_send - send a marker information frame + * @port: the port we're looking at + * + * This function does nothing since we decided not to implement send and handle + * response for marker PDU's, in this stage, but only to respond to marker + * information. + */ +static void ad_marker_info_send(struct port *port) +{ + struct marker marker; + u16 index; + + // fill the marker PDU with the appropriate values + marker.subtype = 0x02; + marker.version_number = 0x01; + marker.tlv_type = AD_MARKER_INFORMATION_SUBTYPE; + marker.marker_length = 0x16; + // convert requester_port to Big Endian + marker.requester_port = (((port->actor_port_number & 0xFF) << 8) |((u16)(port->actor_port_number & 0xFF00) >> 8)); + marker.requester_system = port->actor_system; + // convert requester_port(u32) to Big Endian + marker.requester_transaction_id = (((++port->transaction_id & 0xFF) << 24) |((port->transaction_id & 0xFF00) << 8) |((port->transaction_id & 0xFF0000) >> 8) |((port->transaction_id & 0xFF000000) >> 24)); + marker.pad = 0; + marker.tlv_type_terminator = 0x00; + marker.terminator_length = 0x00; + for (index=0; index<90; index++) { + marker.reserved_90[index]=0; + } + + // send the marker information + if (ad_marker_send(port, &marker) >= 0) { + dprintk("Sent Marker Information on port %d\n", port->actor_port_number); + } +} +#endif + +/** + * ad_marker_info_received - handle receive of a Marker information frame + * @marker_info: Marker info received + * @port: the port we're looking at + * + */ +static void ad_marker_info_received(struct marker *marker_info,struct port *port) +{ + struct marker marker; + + // copy the received marker data to the response marker + //marker = *marker_info; + memcpy(&marker, marker_info, sizeof(struct marker)); + // change the marker subtype to marker response + marker.tlv_type=AD_MARKER_RESPONSE_SUBTYPE; + // send the marker response + + if (ad_marker_send(port, &marker) >= 0) { + dprintk("Sent Marker Response on port %d\n", port->actor_port_number); + } +} + +/** + * ad_marker_response_received - handle receive of a marker response frame + * @marker: marker PDU received + * @port: the port we're looking at + * + * This function does nothing since we decided not to implement send and handle + * response for marker PDU's, in this stage, but only to respond to marker + * information. + */ +static void ad_marker_response_received(struct marker *marker, struct port *port) +{ + marker=NULL; // just to satisfy the compiler + port=NULL; // just to satisfy the compiler + // DO NOTHING, SINCE WE DECIDED NOT TO IMPLEMENT THIS FEATURE FOR NOW +} + +/** + * ad_initialize_lacpdu - initialize a given lacpdu structure + * @lacpdu: lacpdu structure to initialize + * + */ +static void ad_initialize_lacpdu(struct lacpdu *lacpdu) +{ + u16 index; + + // initialize lacpdu data + lacpdu->subtype = 0x01; + lacpdu->version_number = 0x01; + lacpdu->tlv_type_actor_info = 0x01; + lacpdu->actor_information_length = 0x14; + // lacpdu->actor_system_priority updated on send + // lacpdu->actor_system updated on send + // lacpdu->actor_key updated on send + // lacpdu->actor_port_priority updated on send + // lacpdu->actor_port updated on send + // lacpdu->actor_state updated on send + lacpdu->tlv_type_partner_info = 0x02; + lacpdu->partner_information_length = 0x14; + for (index=0; index<=2; index++) { + lacpdu->reserved_3_1[index]=0; + } + // lacpdu->partner_system_priority updated on send + // lacpdu->partner_system updated on send + // lacpdu->partner_key updated on send + // lacpdu->partner_port_priority updated on send + // lacpdu->partner_port updated on send + // lacpdu->partner_state updated on send + for (index=0; index<=2; index++) { + lacpdu->reserved_3_2[index]=0; + } + lacpdu->tlv_type_collector_info = 0x03; + lacpdu->collector_information_length= 0x10; + lacpdu->collector_max_delay = AD_COLLECTOR_MAX_DELAY; + for (index=0; index<=11; index++) { + lacpdu->reserved_12[index]=0; + } + lacpdu->tlv_type_terminator = 0x00; + lacpdu->terminator_length = 0; + for (index=0; index<=49; index++) { + lacpdu->reserved_50[index]=0; + } +} + +////////////////////////////////////////////////////////////////////////////////////// +// ================= AD exported functions to the main bonding code ================== +////////////////////////////////////////////////////////////////////////////////////// + +// Check aggregators status in team every T seconds +#define AD_AGGREGATOR_SELECTION_TIMER 8 + +static u16 aggregator_identifier; + +/** + * bond_3ad_initialize - initialize a bond's 802.3ad parameters and structures + * @bond: bonding struct to work on + * @tick_resolution: tick duration (millisecond resolution) + * @lacp_fast: boolean. whether fast periodic should be used + * + * Can be called only after the mac address of the bond is set. + */ +void bond_3ad_initialize(struct bonding *bond, u16 tick_resolution, int lacp_fast) +{ + // check that the bond is not initialized yet + if (MAC_ADDRESS_COMPARE(&(BOND_AD_INFO(bond).system.sys_mac_addr), &(bond->dev->dev_addr))) { + + aggregator_identifier = 0; + + BOND_AD_INFO(bond).lacp_fast = lacp_fast; + BOND_AD_INFO(bond).system.sys_priority = 0xFFFF; + BOND_AD_INFO(bond).system.sys_mac_addr = *((struct mac_addr *)bond->dev->dev_addr); + + // initialize how many times this module is called in one second(should be about every 100ms) + ad_ticks_per_sec = tick_resolution; + + // initialize the aggregator selection timer(to activate an aggregation selection after initialize) + BOND_AD_INFO(bond).agg_select_timer = (AD_AGGREGATOR_SELECTION_TIMER * ad_ticks_per_sec); + BOND_AD_INFO(bond).agg_select_mode = AD_BANDWIDTH; + } +} + +/** + * bond_3ad_bind_slave - initialize a slave's port + * @slave: slave struct to work on + * + * Returns: 0 on success + * < 0 on error + */ +int bond_3ad_bind_slave(struct slave *slave) +{ + struct bonding *bond = bond_get_bond_by_slave(slave); + struct port *port; + struct aggregator *aggregator; + + if (bond == NULL) { + printk(KERN_ERR "The slave %s is not attached to its bond\n", slave->dev->name); + return -1; + } + + //check that the slave has not been intialized yet. + if (SLAVE_AD_INFO(slave).port.slave != slave) { + + // port initialization + port = &(SLAVE_AD_INFO(slave).port); + + ad_initialize_port(port, BOND_AD_INFO(bond).lacp_fast); + + port->slave = slave; + port->actor_port_number = SLAVE_AD_INFO(slave).id; + // key is determined according to the link speed, duplex and user key(which is yet not supported) + // ------------------------------------------------------------ + // Port key : | User key | Speed |Duplex| + // ------------------------------------------------------------ + // 16 6 1 0 + port->actor_admin_port_key = 0; // initialize this parameter + port->actor_admin_port_key |= __get_duplex(port); + port->actor_admin_port_key |= (__get_link_speed(port) << 1); + port->actor_oper_port_key = port->actor_admin_port_key; + // if the port is not full duplex, then the port should be not lacp Enabled + if (!(port->actor_oper_port_key & AD_DUPLEX_KEY_BITS)) { + port->sm_vars &= ~AD_PORT_LACP_ENABLED; + } + // actor system is the bond's system + port->actor_system = BOND_AD_INFO(bond).system.sys_mac_addr; + // tx timer(to verify that no more than MAX_TX_IN_SECOND lacpdu's are sent in one second) + port->sm_tx_timer_counter = ad_ticks_per_sec/AD_MAX_TX_IN_SECOND; + port->aggregator = NULL; + port->next_port_in_aggregator = NULL; + + __disable_port(port); + __initialize_port_locks(port); + + + // aggregator initialization + aggregator = &(SLAVE_AD_INFO(slave).aggregator); + + ad_initialize_agg(aggregator); + + aggregator->aggregator_mac_address = *((struct mac_addr *)bond->dev->dev_addr); + aggregator->aggregator_identifier = (++aggregator_identifier); + aggregator->slave = slave; + aggregator->is_active = 0; + aggregator->num_of_ports = 0; + } + + return 0; +} + +/** + * bond_3ad_unbind_slave - deinitialize a slave's port + * @slave: slave struct to work on + * + * Search for the aggregator that is related to this port, remove the + * aggregator and assign another aggregator for other port related to it + * (if any), and remove the port. + */ +void bond_3ad_unbind_slave(struct slave *slave) +{ + struct port *port, *prev_port, *temp_port; + struct aggregator *aggregator, *new_aggregator, *temp_aggregator; + int select_new_active_agg = 0; + + // find the aggregator related to this slave + aggregator = &(SLAVE_AD_INFO(slave).aggregator); + + // find the port related to this slave + port = &(SLAVE_AD_INFO(slave).port); + + // if slave is null, the whole port is not initialized + if (!port->slave) { + printk(KERN_WARNING DRV_NAME ": Trying to unbind an uninitialized port on %s\n", slave->dev->name); + return; + } + + dprintk("Unbinding Link Aggregation Group %d\n", aggregator->aggregator_identifier); + + /* Tell the partner that this port is not suitable for aggregation */ + port->actor_oper_port_state &= ~AD_STATE_AGGREGATION; + __update_lacpdu_from_port(port); + ad_lacpdu_send(port); + + // check if this aggregator is occupied + if (aggregator->lag_ports) { + // check if there are other ports related to this aggregator except + // the port related to this slave(thats ensure us that there is a + // reason to search for new aggregator, and that we will find one + if ((aggregator->lag_ports != port) || (aggregator->lag_ports->next_port_in_aggregator)) { + // find new aggregator for the related port(s) + new_aggregator = __get_first_agg(port); + for (; new_aggregator; new_aggregator = __get_next_agg(new_aggregator)) { + // if the new aggregator is empty, or it connected to to our port only + if (!new_aggregator->lag_ports || ((new_aggregator->lag_ports == port) && !new_aggregator->lag_ports->next_port_in_aggregator)) { + break; + } + } + // if new aggregator found, copy the aggregator's parameters + // and connect the related lag_ports to the new aggregator + if ((new_aggregator) && ((!new_aggregator->lag_ports) || ((new_aggregator->lag_ports == port) && !new_aggregator->lag_ports->next_port_in_aggregator))) { + dprintk("Some port(s) related to LAG %d - replaceing with LAG %d\n", aggregator->aggregator_identifier, new_aggregator->aggregator_identifier); + + if ((new_aggregator->lag_ports == port) && new_aggregator->is_active) { + printk(KERN_INFO DRV_NAME ": Removing an active aggregator\n"); + // select new active aggregator + select_new_active_agg = 1; + } + + new_aggregator->is_individual = aggregator->is_individual; + new_aggregator->actor_admin_aggregator_key = aggregator->actor_admin_aggregator_key; + new_aggregator->actor_oper_aggregator_key = aggregator->actor_oper_aggregator_key; + new_aggregator->partner_system = aggregator->partner_system; + new_aggregator->partner_system_priority = aggregator->partner_system_priority; + new_aggregator->partner_oper_aggregator_key = aggregator->partner_oper_aggregator_key; + new_aggregator->receive_state = aggregator->receive_state; + new_aggregator->transmit_state = aggregator->transmit_state; + new_aggregator->lag_ports = aggregator->lag_ports; + new_aggregator->is_active = aggregator->is_active; + new_aggregator->num_of_ports = aggregator->num_of_ports; + + // update the information that is written on the ports about the aggregator + for (temp_port=aggregator->lag_ports; temp_port; temp_port=temp_port->next_port_in_aggregator) { + temp_port->aggregator=new_aggregator; + temp_port->actor_port_aggregator_identifier = new_aggregator->aggregator_identifier; + } + + // clear the aggregator + ad_clear_agg(aggregator); + + if (select_new_active_agg) { + ad_agg_selection_logic(__get_first_agg(port)); + } + } else { + printk(KERN_WARNING DRV_NAME ": Warning: unbinding aggregator, " + "and could not find a new aggregator for its ports\n"); + } + } else { // in case that the only port related to this aggregator is the one we want to remove + select_new_active_agg = aggregator->is_active; + // clear the aggregator + ad_clear_agg(aggregator); + if (select_new_active_agg) { + printk(KERN_INFO "Removing an active aggregator\n"); + // select new active aggregator + ad_agg_selection_logic(__get_first_agg(port)); + } + } + } + + dprintk("Unbinding port %d\n", port->actor_port_number); + // find the aggregator that this port is connected to + temp_aggregator = __get_first_agg(port); + for (; temp_aggregator; temp_aggregator = __get_next_agg(temp_aggregator)) { + prev_port = NULL; + // search the port in the aggregator's related ports + for (temp_port=temp_aggregator->lag_ports; temp_port; prev_port=temp_port, temp_port=temp_port->next_port_in_aggregator) { + if (temp_port == port) { // the aggregator found - detach the port from this aggregator + if (prev_port) { + prev_port->next_port_in_aggregator = temp_port->next_port_in_aggregator; + } else { + temp_aggregator->lag_ports = temp_port->next_port_in_aggregator; + } + temp_aggregator->num_of_ports--; + if (temp_aggregator->num_of_ports==0) { + select_new_active_agg = temp_aggregator->is_active; + // clear the aggregator + ad_clear_agg(temp_aggregator); + if (select_new_active_agg) { + printk(KERN_INFO "Removing an active aggregator\n"); + // select new active aggregator + ad_agg_selection_logic(__get_first_agg(port)); + } + } + break; + } + } + } + port->slave=NULL; +} + +/** + * bond_3ad_state_machine_handler - handle state machines timeout + * @bond: bonding struct to work on + * + * The state machine handling concept in this module is to check every tick + * which state machine should operate any function. The execution order is + * round robin, so when we have an interaction between state machines, the + * reply of one to each other might be delayed until next tick. + * + * This function also complete the initialization when the agg_select_timer + * times out, and it selects an aggregator for the ports that are yet not + * related to any aggregator, and selects the active aggregator for a bond. + */ +void bond_3ad_state_machine_handler(struct bonding *bond) +{ + struct port *port; + struct aggregator *aggregator; + + read_lock(&bond->lock); + + if (bond->kill_timers) { + goto out; + } + + //check if there are any slaves + if (bond->slave_cnt == 0) { + goto re_arm; + } + + // check if agg_select_timer timer after initialize is timed out + if (BOND_AD_INFO(bond).agg_select_timer && !(--BOND_AD_INFO(bond).agg_select_timer)) { + // select the active aggregator for the bond + if ((port = __get_first_port(bond))) { + if (!port->slave) { + printk(KERN_WARNING DRV_NAME ": Warning: bond's first port is uninitialized\n"); + goto re_arm; + } + + aggregator = __get_first_agg(port); + ad_agg_selection_logic(aggregator); + } + } + + // for each port run the state machines + for (port = __get_first_port(bond); port; port = __get_next_port(port)) { + if (!port->slave) { + printk(KERN_WARNING DRV_NAME ": Warning: Found an uninitialized port\n"); + goto re_arm; + } + + ad_rx_machine(NULL, port); + ad_periodic_machine(port); + ad_port_selection_logic(port); + ad_mux_machine(port); + ad_tx_machine(port); + + // turn off the BEGIN bit, since we already handled it + if (port->sm_vars & AD_PORT_BEGIN) { + port->sm_vars &= ~AD_PORT_BEGIN; + } + } + +re_arm: + mod_timer(&(BOND_AD_INFO(bond).ad_timer), jiffies + ad_delta_in_ticks); +out: + read_unlock(&bond->lock); +} + +/** + * bond_3ad_rx_indication - handle a received frame + * @lacpdu: received lacpdu + * @slave: slave struct to work on + * @length: length of the data received + * + * It is assumed that frames that were sent on this NIC don't returned as new + * received frames (loopback). Since only the payload is given to this + * function, it check for loopback. + */ +static void bond_3ad_rx_indication(struct lacpdu *lacpdu, struct slave *slave, u16 length) +{ + struct port *port; + + if (length >= sizeof(struct lacpdu)) { + + port = &(SLAVE_AD_INFO(slave).port); + + if (!port->slave) { + printk(KERN_WARNING DRV_NAME ": Warning: port of slave %s is uninitialized\n", slave->dev->name); + return; + } + + switch (lacpdu->subtype) { + case AD_TYPE_LACPDU: + __ntohs_lacpdu(lacpdu); + dprintk("Received LACPDU on port %d\n", port->actor_port_number); + ad_rx_machine(lacpdu, port); + break; + + case AD_TYPE_MARKER: + // No need to convert fields to Little Endian since we don't use the marker's fields. + + switch (((struct marker *)lacpdu)->tlv_type) { + case AD_MARKER_INFORMATION_SUBTYPE: + dprintk("Received Marker Information on port %d\n", port->actor_port_number); + ad_marker_info_received((struct marker *)lacpdu, port); + break; + + case AD_MARKER_RESPONSE_SUBTYPE: + dprintk("Received Marker Response on port %d\n", port->actor_port_number); + ad_marker_response_received((struct marker *)lacpdu, port); + break; + + default: + dprintk("Received an unknown Marker subtype on slot %d\n", port->actor_port_number); + } + } + } +} + +/** + * bond_3ad_adapter_speed_changed - handle a slave's speed change indication + * @slave: slave struct to work on + * + * Handle reselection of aggregator (if needed) for this port. + */ +void bond_3ad_adapter_speed_changed(struct slave *slave) +{ + struct port *port; + + port = &(SLAVE_AD_INFO(slave).port); + + // if slave is null, the whole port is not initialized + if (!port->slave) { + printk(KERN_WARNING DRV_NAME ": Warning: speed changed for uninitialized port on %s\n", + slave->dev->name); + return; + } + + port->actor_admin_port_key &= ~AD_SPEED_KEY_BITS; + port->actor_oper_port_key=port->actor_admin_port_key |= (__get_link_speed(port) << 1); + dprintk("Port %d changed speed\n", port->actor_port_number); + // there is no need to reselect a new aggregator, just signal the + // state machines to reinitialize + port->sm_vars |= AD_PORT_BEGIN; +} + +/** + * bond_3ad_adapter_duplex_changed - handle a slave's duplex change indication + * @slave: slave struct to work on + * + * Handle reselection of aggregator (if needed) for this port. + */ +void bond_3ad_adapter_duplex_changed(struct slave *slave) +{ + struct port *port; + + port=&(SLAVE_AD_INFO(slave).port); + + // if slave is null, the whole port is not initialized + if (!port->slave) { + printk(KERN_WARNING DRV_NAME ": Warning: duplex changed for uninitialized port on %s\n", + slave->dev->name); + return; + } + + port->actor_admin_port_key &= ~AD_DUPLEX_KEY_BITS; + port->actor_oper_port_key=port->actor_admin_port_key |= __get_duplex(port); + dprintk("Port %d changed duplex\n", port->actor_port_number); + // there is no need to reselect a new aggregator, just signal the + // state machines to reinitialize + port->sm_vars |= AD_PORT_BEGIN; +} + +/** + * bond_3ad_handle_link_change - handle a slave's link status change indication + * @slave: slave struct to work on + * @status: whether the link is now up or down + * + * Handle reselection of aggregator (if needed) for this port. + */ +void bond_3ad_handle_link_change(struct slave *slave, char link) +{ + struct port *port; + + port = &(SLAVE_AD_INFO(slave).port); + + // if slave is null, the whole port is not initialized + if (!port->slave) { + printk(KERN_WARNING DRV_NAME ": Warning: link status changed for uninitialized port on %s\n", + slave->dev->name); + return; + } + + // on link down we are zeroing duplex and speed since some of the adaptors(ce1000.lan) report full duplex/speed instead of N/A(duplex) / 0(speed) + // on link up we are forcing recheck on the duplex and speed since some of he adaptors(ce1000.lan) report + if (link == BOND_LINK_UP) { + port->is_enabled = 1; + port->actor_admin_port_key &= ~AD_DUPLEX_KEY_BITS; + port->actor_oper_port_key=port->actor_admin_port_key |= __get_duplex(port); + port->actor_admin_port_key &= ~AD_SPEED_KEY_BITS; + port->actor_oper_port_key=port->actor_admin_port_key |= (__get_link_speed(port) << 1); + } else { + /* link has failed */ + port->is_enabled = 0; + port->actor_admin_port_key &= ~AD_DUPLEX_KEY_BITS; + port->actor_oper_port_key= (port->actor_admin_port_key &= ~AD_SPEED_KEY_BITS); + } + //BOND_PRINT_DBG(("Port %d changed link status to %s", port->actor_port_number, ((link == BOND_LINK_UP)?"UP":"DOWN"))); + // there is no need to reselect a new aggregator, just signal the + // state machines to reinitialize + port->sm_vars |= AD_PORT_BEGIN; +} + +/** + * bond_3ad_get_active_agg_info - get information of the active aggregator + * @bond: bonding struct to work on + * @ad_info: ad_info struct to fill with the bond's info + * + * Returns: 0 on success + * < 0 on error + */ +int bond_3ad_get_active_agg_info(struct bonding *bond, struct ad_info *ad_info) +{ + struct aggregator *aggregator = NULL; + struct port *port; + + for (port = __get_first_port(bond); port; port = __get_next_port(port)) { + if (port->aggregator && port->aggregator->is_active) { + aggregator = port->aggregator; + break; + } + } + + if (aggregator) { + ad_info->aggregator_id = aggregator->aggregator_identifier; + ad_info->ports = aggregator->num_of_ports; + ad_info->actor_key = aggregator->actor_oper_aggregator_key; + ad_info->partner_key = aggregator->partner_oper_aggregator_key; + memcpy(ad_info->partner_system, aggregator->partner_system.mac_addr_value, ETH_ALEN); + return 0; + } + + return -1; +} + +int bond_3ad_xmit_xor(struct sk_buff *skb, struct net_device *dev) +{ + struct slave *slave, *start_at; + struct bonding *bond = dev->priv; + struct ethhdr *data = (struct ethhdr *)skb->data; + int slave_agg_no; + int slaves_in_agg; + int agg_id; + int i; + struct ad_info ad_info; + int res = 1; + + /* make sure that the slaves list will + * not change during tx + */ + read_lock(&bond->lock); + + if (!BOND_IS_OK(bond)) { + goto out; + } + + if (bond_3ad_get_active_agg_info(bond, &ad_info)) { + printk(KERN_DEBUG "ERROR: bond_3ad_get_active_agg_info failed\n"); + goto out; + } + + slaves_in_agg = ad_info.ports; + agg_id = ad_info.aggregator_id; + + if (slaves_in_agg == 0) { + /*the aggregator is empty*/ + printk(KERN_DEBUG "ERROR: active aggregator is empty\n"); + goto out; + } + + slave_agg_no = (data->h_dest[5]^bond->dev->dev_addr[5]) % slaves_in_agg; + + bond_for_each_slave(bond, slave, i) { + struct aggregator *agg = SLAVE_AD_INFO(slave).port.aggregator; + + if (agg && (agg->aggregator_identifier == agg_id)) { + slave_agg_no--; + if (slave_agg_no < 0) { + break; + } + } + } + + if (slave_agg_no >= 0) { + printk(KERN_ERR DRV_NAME ": Error: Couldn't find a slave to tx on for aggregator ID %d\n", agg_id); + goto out; + } + + start_at = slave; + + bond_for_each_slave_from(bond, slave, i, start_at) { + int slave_agg_id = 0; + struct aggregator *agg = SLAVE_AD_INFO(slave).port.aggregator; + + if (agg) { + slave_agg_id = agg->aggregator_identifier; + } + + if (SLAVE_IS_OK(slave) && agg && (slave_agg_id == agg_id)) { + res = bond_dev_queue_xmit(bond, skb, slave->dev); + break; + } + } + +out: + if (res) { + /* no suitable interface, frame not sent */ + dev_kfree_skb(skb); + } + read_unlock(&bond->lock); + return 0; +} + +int bond_3ad_lacpdu_recv(struct sk_buff *skb, struct net_device *dev, struct packet_type* ptype) +{ + struct bonding *bond = dev->priv; + struct slave *slave = NULL; + int ret = NET_RX_DROP; + + if (!(dev->flags & IFF_MASTER)) { + goto out; + } + + read_lock(&bond->lock); + slave = bond_get_slave_by_dev((struct bonding *)dev->priv, + skb->real_dev); + if (slave == NULL) { + goto out_unlock; + } + + bond_3ad_rx_indication((struct lacpdu *) skb->data, slave, skb->len); + + ret = NET_RX_SUCCESS; + +out_unlock: + read_unlock(&bond->lock); +out: + dev_kfree_skb(skb); + + return ret; +} + -- cgit v1.2.2