From ab6ad5a4875e99dffe957a411fe890402a91f67f Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Wed, 12 Aug 2009 08:24:29 +0000 Subject: bnx2x: Whitespaces and comments Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x_link.c | 115 ++++++++++++++++++++++++----------------------- 1 file changed, 58 insertions(+), 57 deletions(-) (limited to 'drivers/net/bnx2x_link.c') diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c index c2b001031e7b..e32d3370862e 100644 --- a/drivers/net/bnx2x_link.c +++ b/drivers/net/bnx2x_link.c @@ -182,6 +182,7 @@ static void bnx2x_set_serdes_access(struct link_params *params) { struct bnx2x *bp = params->bp; u32 emac_base = (params->port) ? GRCBASE_EMAC1 : GRCBASE_EMAC0; + /* Set Clause 22 */ REG_WR(bp, NIG_REG_SERDES0_CTRL_MD_ST + params->port*0x10, 1); REG_WR(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM, 0x245f8000); @@ -194,6 +195,7 @@ static void bnx2x_set_serdes_access(struct link_params *params) static void bnx2x_set_phy_mdio(struct link_params *params, u8 phy_flags) { struct bnx2x *bp = params->bp; + if (phy_flags & PHY_XGXS_FLAG) { REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_ST + params->port*0x18, 0); @@ -465,7 +467,6 @@ static u8 bnx2x_bmac_enable(struct link_params *params, struct link_vars *vars, REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL, wb_data, 2); - /* set rx mtu */ wb_data[0] = ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD; wb_data[1] = 0; @@ -684,6 +685,7 @@ void bnx2x_link_status_update(struct link_params *params, static void bnx2x_update_mng(struct link_params *params, u32 link_status) { struct bnx2x *bp = params->bp; + REG_WR(bp, params->shmem_base + offsetof(struct shmem_region, port_mb[params->port].link_status), @@ -780,7 +782,6 @@ static u8 bnx2x_pbf_update(struct link_params *params, u32 flow_ctrl, DP(NETIF_MSG_LINK, "Invalid line_speed 0x%x\n", line_speed); return -EINVAL; - break; } } REG_WR(bp, PBF_REG_P0_INIT_CRD + port*4, init_crd); @@ -800,6 +801,7 @@ static u8 bnx2x_pbf_update(struct link_params *params, u32 flow_ctrl, static u32 bnx2x_get_emac_base(struct bnx2x *bp, u32 ext_phy_type, u8 port) { u32 emac_base; + switch (ext_phy_type) { case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072: case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726: @@ -905,7 +907,7 @@ u8 bnx2x_cl45_read(struct bnx2x *bp, u8 port, u32 ext_phy_type, val = saved_mode & ((EMAC_MDIO_MODE_AUTO_POLL | EMAC_MDIO_MODE_CLOCK_CNT)); val |= (EMAC_MDIO_MODE_CLAUSE_45 | - (49 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT)); + (49L << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT)); REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, val); REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE); udelay(40); @@ -1535,14 +1537,14 @@ static void bnx2x_pause_resolve(struct link_vars *vars, u32 pause_result) } } -static u8 bnx2x_ext_phy_resove_fc(struct link_params *params, +static u8 bnx2x_ext_phy_resolve_fc(struct link_params *params, struct link_vars *vars) { struct bnx2x *bp = params->bp; u8 ext_phy_addr; - u16 ld_pause; /* local */ - u16 lp_pause; /* link partner */ - u16 an_complete; /* AN complete */ + u16 ld_pause; /* local */ + u16 lp_pause; /* link partner */ + u16 an_complete; /* AN complete */ u16 pause_result; u8 ret = 0; u32 ext_phy_type; @@ -1642,7 +1644,7 @@ static void bnx2x_flow_ctrl_resolve(struct link_params *params, DP(NETIF_MSG_LINK, "pause_result 0x%x\n", pause_result); bnx2x_pause_resolve(vars, pause_result); } else if ((params->req_flow_ctrl == BNX2X_FLOW_CTRL_AUTO) && - (bnx2x_ext_phy_resove_fc(params, vars))) { + (bnx2x_ext_phy_resolve_fc(params, vars))) { return; } else { if (params->req_flow_ctrl == BNX2X_FLOW_CTRL_AUTO) @@ -1784,7 +1786,7 @@ static u8 bnx2x_link_settings_status(struct link_params *params, "link speed unsupported gp_status 0x%x\n", gp_status); return -EINVAL; - break; + case GP_STATUS_10G_KX4: case GP_STATUS_10G_HIG: case GP_STATUS_10G_CX4: @@ -1821,8 +1823,7 @@ static u8 bnx2x_link_settings_status(struct link_params *params, DP(NETIF_MSG_LINK, "link speed unsupported gp_status 0x%x\n", gp_status); - return -EINVAL; - break; + return -EINVAL; } /* Upon link speed change set the NIG into drain mode. @@ -2061,16 +2062,17 @@ static void bnx2x_ext_phy_reset(struct link_params *params, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 1<<15); - break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072: + DP(NETIF_MSG_LINK, "XGXS 8072\n"); + /* Unset Low Power Mode and SW reset */ /* Restore normal power mode*/ bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, MISC_REGISTERS_GPIO_OUTPUT_HIGH, params->port); - DP(NETIF_MSG_LINK, "XGXS 8072\n"); bnx2x_cl45_write(bp, params->port, ext_phy_type, ext_phy_addr, @@ -2078,8 +2080,9 @@ static void bnx2x_ext_phy_reset(struct link_params *params, MDIO_PMA_REG_CTRL, 1<<15); break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073: - { + DP(NETIF_MSG_LINK, "XGXS 8073\n"); /* Restore normal power mode*/ bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, @@ -2089,9 +2092,6 @@ static void bnx2x_ext_phy_reset(struct link_params *params, bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1, MISC_REGISTERS_GPIO_OUTPUT_HIGH, params->port); - - DP(NETIF_MSG_LINK, "XGXS 8073\n"); - } break; case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101: @@ -2107,7 +2107,6 @@ static void bnx2x_ext_phy_reset(struct link_params *params, break; case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481: - /* Restore normal power mode*/ bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, MISC_REGISTERS_GPIO_OUTPUT_HIGH, @@ -2146,20 +2145,18 @@ static void bnx2x_ext_phy_reset(struct link_params *params, break; default: - DP(NETIF_MSG_LINK, - "BAD SerDes ext_phy_config 0x%x\n", + DP(NETIF_MSG_LINK, "BAD SerDes ext_phy_config 0x%x\n", params->ext_phy_config); break; } } } - static void bnx2x_save_spirom_version(struct bnx2x *bp, u8 port, u32 shmem_base, u32 spirom_ver) { - DP(NETIF_MSG_LINK, "FW version 0x%x:0x%x\n", - (u16)(spirom_ver>>16), (u16)spirom_ver); + DP(NETIF_MSG_LINK, "FW version 0x%x:0x%x for port %d\n", + (u16)(spirom_ver>>16), (u16)spirom_ver, port); REG_WR(bp, shmem_base + offsetof(struct shmem_region, port_mb[port].ext_phy_fw_version), @@ -2171,6 +2168,7 @@ static void bnx2x_save_bcm_spirom_ver(struct bnx2x *bp, u8 port, u32 shmem_base) { u16 fw_ver1, fw_ver2; + bnx2x_cl45_read(bp, port, ext_phy_type, ext_phy_addr, MDIO_PMA_DEVAD, MDIO_PMA_REG_ROM_VER1, &fw_ver1); bnx2x_cl45_read(bp, port, ext_phy_type, ext_phy_addr, MDIO_PMA_DEVAD, @@ -2423,7 +2421,6 @@ static u8 bnx2x_bcm8073_xaui_wa(struct link_params *params) } DP(NETIF_MSG_LINK, "Warning: XAUI work-around timeout !!!\n"); return -EINVAL; - } static void bnx2x_bcm8073_bcm8727_external_rom_boot(struct bnx2x *bp, u8 port, @@ -2565,6 +2562,7 @@ static void bnx2x_sfp_set_transmitter(struct bnx2x *bp, u8 port, u8 tx_en) { u16 val; + DP(NETIF_MSG_LINK, "Setting transmitter tx_en=%x for port %x\n", tx_en, port); /* Disable/Enable transmitter ( TX laser of the SFP+ module.)*/ @@ -2597,6 +2595,7 @@ static u8 bnx2x_8726_read_sfp_module_eeprom(struct link_params *params, u8 port = params->port; u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config); u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config); + if (byte_cnt > 16) { DP(NETIF_MSG_LINK, "Reading from eeprom is" " is limited to 0xf\n"); @@ -2808,6 +2807,7 @@ static u8 bnx2x_get_edc_mode(struct link_params *params, case SFP_EEPROM_CON_TYPE_VAL_COPPER: { u8 copper_module_type; + /* Check if its active cable( includes SFP+ module) of passive cable*/ if (bnx2x_read_sfp_module_eeprom(params, @@ -2842,7 +2842,6 @@ static u8 bnx2x_get_edc_mode(struct link_params *params, DP(NETIF_MSG_LINK, "Optic module detected\n"); check_limiting_mode = 1; break; - default: DP(NETIF_MSG_LINK, "Unable to determine module type 0x%x !!!\n", val); @@ -3169,6 +3168,7 @@ void bnx2x_handle_module_detect_int(struct link_params *params) struct bnx2x *bp = params->bp; u32 gpio_val; u8 port = params->port; + /* Set valid module led off */ bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0, MISC_REGISTERS_GPIO_HIGH, @@ -3236,6 +3236,7 @@ static void bnx2x_bcm807x_force_10G(struct link_params *params) MDIO_AN_REG_CTRL, 0x0000); } + static void bnx2x_bcm8073_set_xaui_low_power_mode(struct link_params *params) { struct bnx2x *bp = params->bp; @@ -3303,7 +3304,6 @@ static void bnx2x_bcm8073_set_xaui_low_power_mode(struct link_params *params) static void bnx2x_8073_set_pause_cl37(struct link_params *params, struct link_vars *vars) { - struct bnx2x *bp = params->bp; u16 cl37_val; u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config); @@ -3535,6 +3535,7 @@ static void bnx2x_init_internal_phy(struct link_params *params, u8 enable_cl73) { struct bnx2x *bp = params->bp; + if (!(vars->phy_flags & PHY_SGMII_FLAG)) { if ((XGXS_EXT_PHY_TYPE(params->ext_phy_config) == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) && @@ -3585,6 +3586,7 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars) u16 ctrl = 0; u16 val = 0; u8 rc = 0; + if (vars->phy_flags & PHY_XGXS_FLAG) { ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config); @@ -3881,14 +3883,12 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars) bnx2x_8073_set_pause_cl37(params, vars); if (ext_phy_type == - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072){ + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072) bnx2x_bcm8072_external_rom_boot(params); - } else { - + else /* In case of 8073 with long xaui lines, don't set the 8073 xaui low power*/ bnx2x_bcm8073_set_xaui_low_power_mode(params); - } bnx2x_cl45_read(bp, params->port, ext_phy_type, @@ -3953,10 +3953,8 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars) ext_phy_addr, MDIO_AN_DEVAD, MDIO_AN_REG_ADV, val); - if (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073) { - bnx2x_cl45_read(bp, params->port, ext_phy_type, ext_phy_addr, @@ -4290,7 +4288,6 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars) bnx2x_save_spirom_version(params->bp, params->port, params->shmem_base, (u32)(fw_ver1<<16 | fw_ver2)); - break; } case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481: @@ -4621,6 +4618,7 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params, u16 rx_sd, pcs_status; u8 ext_phy_link_up = 0; u8 port = params->port; + if (vars->phy_flags & PHY_XGXS_FLAG) { ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config); ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config); @@ -4729,7 +4727,6 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params, break; } } - if (val2 & (1<<1)) vars->line_speed = SPEED_1000; else @@ -4786,8 +4783,9 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params, if ((val1 & (1<<8)) == 0) { DP(NETIF_MSG_LINK, "8727 Power fault" - " has been detected on port" - " %d\n", params->port); + " has been detected on " + "port %d\n", + params->port); printk(KERN_ERR PFX "Error: Power" " fault on %s Port %d has" " been detected and the" @@ -4894,6 +4892,7 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params, { u16 link_status = 0; u16 an1000_status = 0; + if (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072) { bnx2x_cl45_read(bp, params->port, @@ -4909,7 +4908,6 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params, DP(NETIF_MSG_LINK, "870x LASI status 0x%x->0x%x\n", val1, val2); - } else { /* In 8073, port1 is directed through emac0 and * port0 is directed through emac1 @@ -5039,8 +5037,6 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params, MDIO_PMA_DEVAD, MDIO_PMA_REG_CDR_BANDWIDTH, 0x0333); - - } bnx2x_cl45_read(bp, params->port, ext_phy_type, @@ -5225,7 +5221,6 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params, ext_phy_addr); } } - break; default: DP(NETIF_MSG_LINK, "BAD XGXS ext_phy_config 0x%x\n", @@ -5272,6 +5267,7 @@ static void bnx2x_link_int_enable(struct link_params *params) u32 ext_phy_type; u32 mask; struct bnx2x *bp = params->bp; + /* setting the status to report on link up for either XGXS or SerDes */ @@ -5303,10 +5299,10 @@ static void bnx2x_link_int_enable(struct link_params *params) bnx2x_bits_en(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, mask); - DP(NETIF_MSG_LINK, "port %x, is_xgxs=%x, int_status 0x%x\n", port, + + DP(NETIF_MSG_LINK, "port %x, is_xgxs %x, int_status 0x%x\n", port, (params->switch_cfg == SWITCH_CFG_10G), REG_RD(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4)); - DP(NETIF_MSG_LINK, " int_mask 0x%x, MI_INT %x, SERDES_LINK %x\n", REG_RD(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4), REG_RD(bp, NIG_REG_EMAC0_STATUS_MISC_MI_INT + port*0x18), @@ -5738,6 +5734,7 @@ u8 bnx2x_set_led(struct bnx2x *bp, u8 port, u8 mode, u32 speed, u8 rc = 0; u32 tmp; u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0; + DP(NETIF_MSG_LINK, "bnx2x_set_led: port %x, mode %d\n", port, mode); DP(NETIF_MSG_LINK, "speed 0x%x, hw_led_mode 0x%x\n", speed, hw_led_mode); @@ -5816,6 +5813,7 @@ static u8 bnx2x_link_initialize(struct link_params *params, u8 rc = 0; u8 non_ext_phy; u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config); + /* Activate the external PHY */ bnx2x_ext_phy_reset(params, vars); @@ -5889,11 +5887,11 @@ static u8 bnx2x_link_initialize(struct link_params *params, u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars) { struct bnx2x *bp = params->bp; - u32 val; - DP(NETIF_MSG_LINK, "Phy Initialization started \n"); - DP(NETIF_MSG_LINK, "req_speed = %d, req_flowctrl=%d\n", - params->req_line_speed, params->req_flow_ctrl); + + DP(NETIF_MSG_LINK, "Phy Initialization started\n"); + DP(NETIF_MSG_LINK, "req_speed %d, req_flowctrl %d\n", + params->req_line_speed, params->req_flow_ctrl); vars->link_status = 0; vars->phy_link_up = 0; vars->link_up = 0; @@ -5907,7 +5905,6 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars) else vars->phy_flags = PHY_XGXS_FLAG; - /* disable attentions */ bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + params->port*4, (NIG_MASK_XGXS0_LINK_STATUS | @@ -5918,6 +5915,7 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars) bnx2x_emac_init(params, vars); if (CHIP_REV_IS_FPGA(bp)) { + vars->link_up = 1; vars->line_speed = SPEED_10000; vars->duplex = DUPLEX_FULL; @@ -5926,7 +5924,8 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars) /* enable on E1.5 FPGA */ if (CHIP_IS_E1H(bp)) { vars->flow_ctrl |= - (BNX2X_FLOW_CTRL_TX | BNX2X_FLOW_CTRL_RX); + (BNX2X_FLOW_CTRL_TX | + BNX2X_FLOW_CTRL_RX); vars->link_status |= (LINK_STATUS_TX_FLOW_CONTROL_ENABLED | LINK_STATUS_RX_FLOW_CONTROL_ENABLED); @@ -5935,8 +5934,7 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars) bnx2x_emac_enable(params, vars, 0); bnx2x_pbf_update(params, vars->flow_ctrl, vars->line_speed); /* disable drain */ - REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE - + params->port*4, 0); + REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 0); /* update shared memory */ bnx2x_update_mng(params, vars->link_status); @@ -5966,6 +5964,7 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars) } else if (params->loopback_mode == LOOPBACK_BMAC) { + vars->link_up = 1; vars->line_speed = SPEED_10000; vars->duplex = DUPLEX_FULL; @@ -5980,7 +5979,9 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars) REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 0); + } else if (params->loopback_mode == LOOPBACK_EMAC) { + vars->link_up = 1; vars->line_speed = SPEED_1000; vars->duplex = DUPLEX_FULL; @@ -5996,8 +5997,10 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars) vars->duplex); REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 0); + } else if ((params->loopback_mode == LOOPBACK_XGXS_10) || - (params->loopback_mode == LOOPBACK_EXT_PHY)) { + (params->loopback_mode == LOOPBACK_EXT_PHY)) { + vars->link_up = 1; vars->line_speed = SPEED_10000; vars->duplex = DUPLEX_FULL; @@ -6034,7 +6037,6 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars) } else /* No loopback */ { - bnx2x_phy_deassert(params, vars->phy_flags); switch (params->switch_cfg) { case SWITCH_CFG_1G: @@ -6042,8 +6044,7 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars) if ((params->ext_phy_config & PORT_HW_CFG_SERDES_EXT_PHY_TYPE_MASK) == PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482) { - vars->phy_flags |= - PHY_SGMII_FLAG; + vars->phy_flags |= PHY_SGMII_FLAG; } val = REG_RD(bp, @@ -6064,7 +6065,6 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars) default: DP(NETIF_MSG_LINK, "Invalid switch_cfg\n"); return -EINVAL; - break; } DP(NETIF_MSG_LINK, "Phy address = 0x%x\n", params->phy_addr); @@ -6089,7 +6089,6 @@ static void bnx2x_8726_reset_phy(struct bnx2x *bp, u8 port, u8 ext_phy_addr) u8 bnx2x_link_reset(struct link_params *params, struct link_vars *vars, u8 reset_ext_phy) { - struct bnx2x *bp = params->bp; u32 ext_phy_config = params->ext_phy_config; u16 hw_led_mode = params->hw_led_mode; @@ -6102,7 +6101,6 @@ u8 bnx2x_link_reset(struct link_params *params, struct link_vars *vars, config)); /* disable attentions */ - vars->link_status = 0; bnx2x_update_mng(params, vars->link_status); bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, @@ -6198,6 +6196,7 @@ static u8 bnx2x_update_link_down(struct link_params *params, { struct bnx2x *bp = params->bp; u8 port = params->port; + DP(NETIF_MSG_LINK, "Port %x: Link is down\n", port); bnx2x_set_led(bp, port, LED_MODE_OFF, 0, params->hw_led_mode, @@ -6234,6 +6233,7 @@ static u8 bnx2x_update_link_up(struct link_params *params, struct bnx2x *bp = params->bp; u8 port = params->port; u8 rc = 0; + vars->link_status |= LINK_STATUS_LINK_UP; if (link_10g) { bnx2x_bmac_enable(params, vars, 0); @@ -6547,6 +6547,7 @@ static u8 bnx2x_8726_common_init_phy(struct bnx2x *bp, u32 shmem_base) u8 ext_phy_addr; u32 val; s8 port; + /* Use port1 because of the static port-swap */ /* Enable the module detection interrupt */ val = REG_RD(bp, MISC_REG_GPIO_EVENT_EN); -- cgit v1.2.2