From 3e4ef3bb77f7b87c631ba188d4a4b4eb30b2f16f Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 17 Mar 2005 11:31:30 +0000 Subject: [MTD] NAND s3c2410: Simplify command handling Updated with tglx's suggestion to simply the command invocation by simply changing the address of the IO write area Signed-off-by: Ben Dooks Signed-off-by: Thomas Gleixner --- drivers/mtd/nand/s3c2410.c | 118 +++++---------------------------------------- 1 file changed, 12 insertions(+), 106 deletions(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c index cb04b3c771e4..64b1d95e3e37 100644 --- a/drivers/mtd/nand/s3c2410.c +++ b/drivers/mtd/nand/s3c2410.c @@ -11,9 +11,10 @@ * 23-Sep-2004 BJD Mulitple device support * 28-Sep-2004 BJD Fixed ECC placement for Hardware mode * 12-Oct-2004 BJD Fixed errors in use of platform data - * 18-Feb-2004 BJD Fix sparse errors + * 18-Feb-2005 BJD Fix sparse errors + * 14-Mar-2005 BJD Applied tglx's code reduction patch * - * $Id: s3c2410.c,v 1.8 2005/02/18 14:46:12 bjd Exp $ + * $Id: s3c2410.c,v 1.12 2005/03/17 11:31:26 bjd Exp $ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -236,6 +237,7 @@ static void s3c2410_nand_select_chip(struct mtd_info *mtd, int chip) static void s3c2410_nand_hwcontrol(struct mtd_info *mtd, int cmd) { struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd); + struct nand_chip *chip = mtd->priv; unsigned long cur; switch (cmd) { @@ -251,117 +253,22 @@ static void s3c2410_nand_hwcontrol(struct mtd_info *mtd, int cmd) writel(cur, info->regs + S3C2410_NFCONF); break; - /* we don't need to implement these */ case NAND_CTL_SETCLE: - case NAND_CTL_CLRCLE: - case NAND_CTL_SETALE: - case NAND_CTL_CLRALE: - pr_debug(PFX "s3c2410_nand_hwcontrol(%d) unusedn", cmd); + chip->IO_ADDR_W = info->regs + S3C2410_NFCMD; break; - } -} - -/* s3c2410_nand_command - * - * This function implements sending commands and the relevant address - * information to the chip, via the hardware controller. Since the - * S3C2410 generates the correct ALE/CLE signaling automatically, we - * do not need to use hwcontrol. -*/ - -static void s3c2410_nand_command (struct mtd_info *mtd, unsigned command, - int column, int page_addr) -{ - register struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd); - register struct nand_chip *this = mtd->priv; - - /* - * Write out the command to the device. - */ - if (command == NAND_CMD_SEQIN) { - int readcmd; - - if (column >= mtd->oobblock) { - /* OOB area */ - column -= mtd->oobblock; - readcmd = NAND_CMD_READOOB; - } else if (column < 256) { - /* First 256 bytes --> READ0 */ - readcmd = NAND_CMD_READ0; - } else { - column -= 256; - readcmd = NAND_CMD_READ1; - } - - writeb(readcmd, info->regs + S3C2410_NFCMD); - } - writeb(command, info->regs + S3C2410_NFCMD); - - /* Set ALE and clear CLE to start address cycle */ - if (column != -1 || page_addr != -1) { + case NAND_CTL_SETALE: + chip->IO_ADDR_W = info->regs + S3C2410_NFADDR; + break; - /* Serially input address */ - if (column != -1) { - /* Adjust columns for 16 bit buswidth */ - if (this->options & NAND_BUSWIDTH_16) - column >>= 1; - writeb(column, info->regs + S3C2410_NFADDR); - } - if (page_addr != -1) { - writeb((unsigned char) (page_addr), info->regs + S3C2410_NFADDR); - writeb((unsigned char) (page_addr >> 8), info->regs + S3C2410_NFADDR); - /* One more address cycle for higher density devices */ - if (this->chipsize & 0x0c000000) - writeb((unsigned char) ((page_addr >> 16) & 0x0f), - info->regs + S3C2410_NFADDR); - } - /* Latch in address */ - } - - /* - * program and erase have their own busy handlers - * status and sequential in needs no delay - */ - switch (command) { - - case NAND_CMD_PAGEPROG: - case NAND_CMD_ERASE1: - case NAND_CMD_ERASE2: - case NAND_CMD_SEQIN: - case NAND_CMD_STATUS: - return; - - case NAND_CMD_RESET: - if (this->dev_ready) - break; - - udelay(this->chip_delay); - writeb(NAND_CMD_STATUS, info->regs + S3C2410_NFCMD); - - while ( !(this->read_byte(mtd) & 0x40)); - return; - - /* This applies to read commands */ + /* NAND_CTL_CLRCLE: */ + /* NAND_CTL_CLRALE: */ default: - /* - * If we don't have access to the busy pin, we apply the given - * command delay - */ - if (!this->dev_ready) { - udelay (this->chip_delay); - return; - } + chip->IO_ADDR_W = info->regs + S3C2410_NFDATA; + break; } - - /* Apply this short delay always to ensure that we do wait tWB in - * any case on any machine. */ - ndelay (100); - /* wait until command is processed */ - while (!this->dev_ready(mtd)); } - /* s3c2410_nand_devready() * * returns 0 if the nand is busy, 1 if it is ready @@ -529,7 +436,6 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info, chip->IO_ADDR_W = info->regs + S3C2410_NFDATA; chip->hwcontrol = s3c2410_nand_hwcontrol; chip->dev_ready = s3c2410_nand_devready; - chip->cmdfunc = s3c2410_nand_command; chip->write_buf = s3c2410_nand_write_buf; chip->read_buf = s3c2410_nand_read_buf; chip->select_chip = s3c2410_nand_select_chip; -- cgit v1.2.2