From 25985edcedea6396277003854657b5f3cb31a628 Mon Sep 17 00:00:00 2001 From: Lucas De Marchi Date: Wed, 30 Mar 2011 22:57:33 -0300 Subject: Fix common misspellings Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi --- drivers/mtd/chips/Kconfig | 2 +- drivers/mtd/chips/cfi_cmdset_0001.c | 4 ++-- drivers/mtd/chips/cfi_cmdset_0002.c | 10 +++++----- drivers/mtd/chips/cfi_util.c | 2 +- drivers/mtd/chips/jedec_probe.c | 2 +- drivers/mtd/devices/block2mtd.c | 2 +- drivers/mtd/devices/doc2001plus.c | 2 +- drivers/mtd/devices/docecc.c | 4 ++-- drivers/mtd/devices/lart.c | 4 ++-- drivers/mtd/devices/pmc551.c | 4 ++-- drivers/mtd/lpddr/lpddr_cmds.c | 4 ++-- drivers/mtd/maps/ceiva.c | 4 ++-- drivers/mtd/maps/cfi_flagadm.c | 2 +- drivers/mtd/maps/pcmciamtd.c | 2 +- drivers/mtd/maps/pmcmsp-flash.c | 2 +- drivers/mtd/maps/sc520cdp.c | 2 +- drivers/mtd/maps/tqm8xxl.c | 2 +- drivers/mtd/mtdblock.c | 2 +- drivers/mtd/mtdchar.c | 2 +- drivers/mtd/nand/Kconfig | 2 +- drivers/mtd/nand/ams-delta.c | 2 +- drivers/mtd/nand/autcpu12.c | 2 +- drivers/mtd/nand/cs553x_nand.c | 2 +- drivers/mtd/nand/denali.c | 6 +++--- drivers/mtd/nand/diskonchip.c | 8 ++++---- drivers/mtd/nand/fsl_elbc_nand.c | 2 +- drivers/mtd/nand/fsmc_nand.c | 10 +++++----- drivers/mtd/nand/nand_base.c | 2 +- drivers/mtd/nand/nand_bbt.c | 2 +- drivers/mtd/nand/nandsim.c | 2 +- drivers/mtd/nand/nomadik_nand.c | 2 +- drivers/mtd/nand/pasemi_nand.c | 2 +- drivers/mtd/nand/plat_nand.c | 2 +- drivers/mtd/nand/pxa3xx_nand.c | 2 +- drivers/mtd/nand/r852.c | 10 +++++----- drivers/mtd/nand/sh_flctl.c | 2 +- drivers/mtd/nand/sm_common.c | 2 +- drivers/mtd/nand/tmio_nand.c | 2 +- drivers/mtd/onenand/omap2.c | 4 ++-- drivers/mtd/onenand/onenand_sim.c | 4 ++-- drivers/mtd/sm_ftl.c | 4 ++-- drivers/mtd/ubi/scan.c | 2 +- 42 files changed, 68 insertions(+), 68 deletions(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/chips/Kconfig b/drivers/mtd/chips/Kconfig index 35c6a23b183b..b1e3c26edd6d 100644 --- a/drivers/mtd/chips/Kconfig +++ b/drivers/mtd/chips/Kconfig @@ -19,7 +19,7 @@ config MTD_JEDECPROBE help This option enables JEDEC-style probing of flash chips which are not compatible with the Common Flash Interface, but will use the common - CFI-targetted flash drivers for any chips which are identified which + CFI-targeted flash drivers for any chips which are identified which are in fact compatible in all but the probe method. This actually covers most AMD/Fujitsu-compatible chips and also non-CFI Intel chips. diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c index 092aef11120c..09cb7c8d93b4 100644 --- a/drivers/mtd/chips/cfi_cmdset_0001.c +++ b/drivers/mtd/chips/cfi_cmdset_0001.c @@ -1247,12 +1247,12 @@ static int inval_cache_and_wait_for_operation( break; if (chip->erase_suspended && chip_state == FL_ERASING) { - /* Erase suspend occured while sleep: reset timeout */ + /* Erase suspend occurred while sleep: reset timeout */ timeo = reset_timeo; chip->erase_suspended = 0; } if (chip->write_suspended && chip_state == FL_WRITING) { - /* Write suspend occured while sleep: reset timeout */ + /* Write suspend occurred while sleep: reset timeout */ timeo = reset_timeo; chip->write_suspended = 0; } diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c index f9a5331e9445..0b49266840b9 100644 --- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c @@ -263,7 +263,7 @@ static void fixup_old_sst_eraseregion(struct mtd_info *mtd) struct cfi_private *cfi = map->fldrv_priv; /* - * These flashes report two seperate eraseblock regions based on the + * These flashes report two separate eraseblock regions based on the * sector_erase-size and block_erase-size, although they both operate on the * same memory. This is not allowed according to CFI, so we just pick the * sector_erase-size. @@ -611,8 +611,8 @@ static struct mtd_info *cfi_amdstd_setup(struct mtd_info *mtd) * * Note that anything more complicated than checking if no bits are toggling * (including checking DQ5 for an error status) is tricky to get working - * correctly and is therefore not done (particulary with interleaved chips - * as each chip must be checked independantly of the others). + * correctly and is therefore not done (particularly with interleaved chips + * as each chip must be checked independently of the others). */ static int __xipram chip_ready(struct map_info *map, unsigned long addr) { @@ -635,8 +635,8 @@ static int __xipram chip_ready(struct map_info *map, unsigned long addr) * * Note that anything more complicated than checking if no bits are toggling * (including checking DQ5 for an error status) is tricky to get working - * correctly and is therefore not done (particulary with interleaved chips - * as each chip must be checked independantly of the others). + * correctly and is therefore not done (particularly with interleaved chips + * as each chip must be checked independently of the others). * */ static int __xipram chip_good(struct map_info *map, unsigned long addr, map_word expected) diff --git a/drivers/mtd/chips/cfi_util.c b/drivers/mtd/chips/cfi_util.c index 6ae3d111e1e7..8e464054a631 100644 --- a/drivers/mtd/chips/cfi_util.c +++ b/drivers/mtd/chips/cfi_util.c @@ -1,6 +1,6 @@ /* * Common Flash Interface support: - * Generic utility functions not dependant on command set + * Generic utility functions not dependent on command set * * Copyright (C) 2002 Red Hat * Copyright (C) 2003 STMicroelectronics Limited diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c index 4e1be51cc122..ea832ea0e4aa 100644 --- a/drivers/mtd/chips/jedec_probe.c +++ b/drivers/mtd/chips/jedec_probe.c @@ -2075,7 +2075,7 @@ static inline int jedec_match( uint32_t base, } /* - * Make sure the ID's dissappear when the device is taken out of + * Make sure the ID's disappear when the device is taken out of * ID mode. The only time this should fail when it should succeed * is when the ID's are written as data to the same * addresses. For this rare and unfortunate case the chip diff --git a/drivers/mtd/devices/block2mtd.c b/drivers/mtd/devices/block2mtd.c index f29a6f9df6e7..97183c8c9e33 100644 --- a/drivers/mtd/devices/block2mtd.c +++ b/drivers/mtd/devices/block2mtd.c @@ -295,7 +295,7 @@ static struct block2mtd_dev *add_device(char *devname, int erase_size) dev->mtd.owner = THIS_MODULE; if (add_mtd_device(&dev->mtd)) { - /* Device didnt get added, so free the entry */ + /* Device didn't get added, so free the entry */ goto devinit_err; } list_add(&dev->list, &blkmtd_device_list); diff --git a/drivers/mtd/devices/doc2001plus.c b/drivers/mtd/devices/doc2001plus.c index 719b2915dc3a..8b36fa77a195 100644 --- a/drivers/mtd/devices/doc2001plus.c +++ b/drivers/mtd/devices/doc2001plus.c @@ -90,7 +90,7 @@ static inline int DoC_WaitReady(void __iomem * docptr) return ret; } -/* For some reason the Millennium Plus seems to occassionally put itself +/* For some reason the Millennium Plus seems to occasionally put itself * into reset mode. For me this happens randomly, with no pattern that I * can detect. M-systems suggest always check this on any block level * operation and setting to normal mode if in reset mode. diff --git a/drivers/mtd/devices/docecc.c b/drivers/mtd/devices/docecc.c index a99838bb2dc0..37ef29a73ee4 100644 --- a/drivers/mtd/devices/docecc.c +++ b/drivers/mtd/devices/docecc.c @@ -109,7 +109,7 @@ for(ci=(n)-1;ci >=0;ci--)\ of the integer "alpha_to[i]" with a(0) being the LSB and a(m-1) the MSB. Thus for example the polynomial representation of @^5 would be given by the binary representation of the integer "alpha_to[5]". - Similarily, index_of[] can be used as follows: + Similarly, index_of[] can be used as follows: As above, let @ represent the primitive element of GF(2^m) that is the root of the primitive polynomial p(x). In order to find the power of @ (alpha) that has the polynomial representation @@ -121,7 +121,7 @@ for(ci=(n)-1;ci >=0;ci--)\ NOTE: The element alpha_to[2^m-1] = 0 always signifying that the representation of "@^infinity" = 0 is (0,0,0,...,0). - Similarily, the element index_of[0] = A0 always signifying + Similarly, the element index_of[0] = A0 always signifying that the power of alpha which has the polynomial representation (0,0,...,0) is "infinity". diff --git a/drivers/mtd/devices/lart.c b/drivers/mtd/devices/lart.c index caf604167f03..4b829f97d56c 100644 --- a/drivers/mtd/devices/lart.c +++ b/drivers/mtd/devices/lart.c @@ -353,7 +353,7 @@ static inline int erase_block (__u32 offset) /* put the flash back into command mode */ write32 (DATA_TO_FLASH (READ_ARRAY),offset); - /* was the erase successfull? */ + /* was the erase successful? */ if ((status & STATUS_ERASE_ERR)) { printk (KERN_WARNING "%s: erase error at address 0x%.8x.\n",module_name,offset); @@ -508,7 +508,7 @@ static inline int write_dword (__u32 offset,__u32 x) /* put the flash back into command mode */ write32 (DATA_TO_FLASH (READ_ARRAY),offset); - /* was the write successfull? */ + /* was the write successful? */ if ((status & STATUS_PGM_ERR) || read32 (offset) != x) { printk (KERN_WARNING "%s: write error at address 0x%.8x.\n",module_name,offset); diff --git a/drivers/mtd/devices/pmc551.c b/drivers/mtd/devices/pmc551.c index ef0aba0ce58f..41b8cdcc64cb 100644 --- a/drivers/mtd/devices/pmc551.c +++ b/drivers/mtd/devices/pmc551.c @@ -351,7 +351,7 @@ static int pmc551_write(struct mtd_info *mtd, loff_t to, size_t len, * Fixup routines for the V370PDC * PCI device ID 0x020011b0 * - * This function basicly kick starts the DRAM oboard the card and gets it + * This function basically kick starts the DRAM oboard the card and gets it * ready to be used. Before this is done the device reads VERY erratic, so * much that it can crash the Linux 2.2.x series kernels when a user cat's * /proc/pci .. though that is mainly a kernel bug in handling the PCI DEVSEL @@ -540,7 +540,7 @@ static u32 fixup_pmc551(struct pci_dev *dev) /* * Check to make certain the DEVSEL is set correctly, this device - * has a tendancy to assert DEVSEL and TRDY when a write is performed + * has a tendency to assert DEVSEL and TRDY when a write is performed * to the memory when memory is read-only */ if ((cmd & PCI_STATUS_DEVSEL_MASK) != 0x0) { diff --git a/drivers/mtd/lpddr/lpddr_cmds.c b/drivers/mtd/lpddr/lpddr_cmds.c index 04fdfcca93f7..12679925b420 100644 --- a/drivers/mtd/lpddr/lpddr_cmds.c +++ b/drivers/mtd/lpddr/lpddr_cmds.c @@ -3,7 +3,7 @@ * erase, lock/unlock support for LPDDR flash memories * (C) 2008 Korolev Alexey * (C) 2008 Vasiliy Leonenko - * Many thanks to Roman Borisov for intial enabling + * Many thanks to Roman Borisov for initial enabling * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -171,7 +171,7 @@ static int wait_for_ready(struct map_info *map, struct flchip *chip, mutex_lock(&chip->mutex); } if (chip->erase_suspended || chip->write_suspended) { - /* Suspend has occured while sleep: reset timeout */ + /* Suspend has occurred while sleep: reset timeout */ timeo = reset_timeo; chip->erase_suspended = chip->write_suspended = 0; } diff --git a/drivers/mtd/maps/ceiva.c b/drivers/mtd/maps/ceiva.c index e5f645b775ad..23f551dc8ca8 100644 --- a/drivers/mtd/maps/ceiva.c +++ b/drivers/mtd/maps/ceiva.c @@ -42,7 +42,7 @@ * * Please note: * 1. The flash size given should be the largest flash size that can - * be accomodated. + * be accommodated. * * 2. The bus width must defined in clps_setup_flash. * @@ -58,7 +58,7 @@ #define BOOT_PARTITION_SIZE_KiB (16) #define PARAMS_PARTITION_SIZE_KiB (8) #define KERNEL_PARTITION_SIZE_KiB (4*128) -/* Use both remaing portion of first flash, and all of second flash */ +/* Use both remaining portion of first flash, and all of second flash */ #define ROOT_PARTITION_SIZE_KiB (3*128) + (8*128) static struct mtd_partition ceiva_partitions[] = { diff --git a/drivers/mtd/maps/cfi_flagadm.c b/drivers/mtd/maps/cfi_flagadm.c index b4ed81611918..f71343cd77cc 100644 --- a/drivers/mtd/maps/cfi_flagadm.c +++ b/drivers/mtd/maps/cfi_flagadm.c @@ -33,7 +33,7 @@ /* We split the flash chip up into four parts. - * 1: bootloader firts 128k (0x00000000 - 0x0001FFFF) size 0x020000 + * 1: bootloader first 128k (0x00000000 - 0x0001FFFF) size 0x020000 * 2: kernel 640k (0x00020000 - 0x000BFFFF) size 0x0A0000 * 3: compressed 1536k root ramdisk (0x000C0000 - 0x0023FFFF) size 0x180000 * 4: writeable diskpartition (jffs)(0x00240000 - 0x003FFFFF) size 0x1C0000 diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c index 917022948399..6799e75d74e0 100644 --- a/drivers/mtd/maps/pcmciamtd.c +++ b/drivers/mtd/maps/pcmciamtd.c @@ -497,7 +497,7 @@ static int pcmciamtd_config(struct pcmcia_device *link) dev->pcmcia_map.set_vpp = pcmciamtd_set_vpp; /* Request a memory window for PCMCIA. Some architeures can map windows - * upto the maximum that PCMCIA can support (64MiB) - this is ideal and + * up to the maximum that PCMCIA can support (64MiB) - this is ideal and * we aim for a window the size of the whole card - otherwise we try * smaller windows until we succeed */ diff --git a/drivers/mtd/maps/pmcmsp-flash.c b/drivers/mtd/maps/pmcmsp-flash.c index acb13fa5001c..64aea6acd48e 100644 --- a/drivers/mtd/maps/pmcmsp-flash.c +++ b/drivers/mtd/maps/pmcmsp-flash.c @@ -3,7 +3,7 @@ * Config with both CFI and JEDEC device support. * * Basically physmap.c with the addition of partitions and - * an array of mapping info to accomodate more than one flash type per board. + * an array of mapping info to accommodate more than one flash type per board. * * Copyright 2005-2007 PMC-Sierra, Inc. * diff --git a/drivers/mtd/maps/sc520cdp.c b/drivers/mtd/maps/sc520cdp.c index 85c1e56309ec..4d8aaaf4bb76 100644 --- a/drivers/mtd/maps/sc520cdp.c +++ b/drivers/mtd/maps/sc520cdp.c @@ -197,7 +197,7 @@ static void sc520cdp_setup_par(void) } /* - ** Find the PARxx registers that are reponsible for activating + ** Find the PARxx registers that are responsible for activating ** ROMCS0, ROMCS1 and BOOTCS. Reprogram each of these with a ** new value from the table. */ diff --git a/drivers/mtd/maps/tqm8xxl.c b/drivers/mtd/maps/tqm8xxl.c index c08e140d40ed..0718dfb3ee64 100644 --- a/drivers/mtd/maps/tqm8xxl.c +++ b/drivers/mtd/maps/tqm8xxl.c @@ -63,7 +63,7 @@ static void __iomem *start_scan_addr; */ #ifdef CONFIG_MTD_PARTITIONS -/* Currently, TQM8xxL has upto 8MiB flash */ +/* Currently, TQM8xxL has up to 8MiB flash */ static unsigned long tqm8xxl_max_flash_size = 0x00800000; /* partition definition for first flash bank diff --git a/drivers/mtd/mtdblock.c b/drivers/mtd/mtdblock.c index 1e74ad961040..3326615ad66b 100644 --- a/drivers/mtd/mtdblock.c +++ b/drivers/mtd/mtdblock.c @@ -129,7 +129,7 @@ static int write_cached_data (struct mtdblk_dev *mtdblk) return ret; /* - * Here we could argubly set the cache state to STATE_CLEAN. + * Here we could arguably set the cache state to STATE_CLEAN. * However this could lead to inconsistency since we will not * be notified if this content is altered on the flash by other * means. Let's declare it empty and leave buffering tasks to diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c index 145b3d0dc0db..4c36ef66a46b 100644 --- a/drivers/mtd/mtdchar.c +++ b/drivers/mtd/mtdchar.c @@ -234,7 +234,7 @@ static ssize_t mtd_read(struct file *file, char __user *buf, size_t count,loff_t * the data. For our userspace tools it is important * to dump areas with ecc errors ! * For kernel internal usage it also might return -EUCLEAN - * to signal the caller that a bitflip has occured and has + * to signal the caller that a bitflip has occurred and has * been corrected by the ECC algorithm. * Userspace software which accesses NAND this way * must be aware of the fact that it deals with NAND diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index a92054e945e1..edec457d361d 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -239,7 +239,7 @@ config MTD_NAND_BCM_UMI help This enables the NAND flash controller on the BCM UMI block. - No board specfic support is done by this driver, each board + No board specific support is done by this driver, each board must advertise a platform_device for the driver to attach. config MTD_NAND_BCM_UMI_HWCS diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c index a067d090cb31..bc65bf71e1a2 100644 --- a/drivers/mtd/nand/ams-delta.c +++ b/drivers/mtd/nand/ams-delta.c @@ -228,7 +228,7 @@ static int __devinit ams_delta_init(struct platform_device *pdev) AMS_DELTA_LATCH2_NAND_NCE | AMS_DELTA_LATCH2_NAND_NWP); - /* Scan to find existance of the device */ + /* Scan to find existence of the device */ if (nand_scan(ams_delta_mtd, 1)) { err = -ENXIO; goto out_mtd; diff --git a/drivers/mtd/nand/autcpu12.c b/drivers/mtd/nand/autcpu12.c index 7c95da1f612c..0911cf03db80 100644 --- a/drivers/mtd/nand/autcpu12.c +++ b/drivers/mtd/nand/autcpu12.c @@ -176,7 +176,7 @@ static int __init autcpu12_init(void) */ this->options = NAND_USE_FLASH_BBT; - /* Scan to find existance of the device */ + /* Scan to find existence of the device */ if (nand_scan(autcpu12_mtd, 1)) { err = -ENXIO; goto out_ior; diff --git a/drivers/mtd/nand/cs553x_nand.c b/drivers/mtd/nand/cs553x_nand.c index 9f1b451005ca..71c35a0b9826 100644 --- a/drivers/mtd/nand/cs553x_nand.c +++ b/drivers/mtd/nand/cs553x_nand.c @@ -241,7 +241,7 @@ static int __init cs553x_init_one(int cs, int mmio, unsigned long adr) /* Enable the following for a flash based bad block table */ this->options = NAND_USE_FLASH_BBT | NAND_NO_AUTOINCR; - /* Scan to find existance of the device */ + /* Scan to find existence of the device */ if (nand_scan(new_mtd, 1)) { err = -ENXIO; goto out_ior; diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c index 8c8d3c86c0e8..4633f094c510 100644 --- a/drivers/mtd/nand/denali.c +++ b/drivers/mtd/nand/denali.c @@ -724,7 +724,7 @@ static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask) } /* This helper function setups the registers for ECC and whether or not - * the spare area will be transfered. */ + * the spare area will be transferred. */ static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en, bool transfer_spare) { @@ -965,7 +965,7 @@ static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf, if (ECC_ERROR_CORRECTABLE(err_correction_info)) { /* If err_byte is larger than ECC_SECTOR_SIZE, - * means error happend in OOB, so we ignore + * means error happened in OOB, so we ignore * it. It's no need for us to correct it * err_device is represented the NAND error * bits are happened in if there are more @@ -1109,7 +1109,7 @@ static void denali_write_page(struct mtd_info *mtd, struct nand_chip *chip, } /* This is the callback that the NAND core calls to write a page without ECC. - * raw access is similiar to ECC page writes, so all the work is done in the + * raw access is similar to ECC page writes, so all the work is done in the * write_page() function above. */ static void denali_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip, diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c index b7f8de7b2780..96c0b34ba8db 100644 --- a/drivers/mtd/nand/diskonchip.c +++ b/drivers/mtd/nand/diskonchip.c @@ -137,7 +137,7 @@ static struct rs_control *rs_decoder; * * Fabrice Bellard figured this out in the old docecc code. I added * some comments, improved a minor bit and converted it to make use - * of the generic Reed-Solomon libary. tglx + * of the generic Reed-Solomon library. tglx */ static int doc_ecc_decode(struct rs_control *rs, uint8_t *data, uint8_t *ecc) { @@ -400,7 +400,7 @@ static uint16_t __init doc200x_ident_chip(struct mtd_info *mtd, int nr) doc200x_hwcontrol(mtd, 0, NAND_CTRL_ALE | NAND_CTRL_CHANGE); doc200x_hwcontrol(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); - /* We cant' use dev_ready here, but at least we wait for the + /* We can't' use dev_ready here, but at least we wait for the * command to complete */ udelay(50); @@ -986,7 +986,7 @@ static int doc200x_correct_data(struct mtd_info *mtd, u_char *dat, dummy = ReadDOC(docptr, ECCConf); } - /* Error occured ? */ + /* Error occurred ? */ if (dummy & 0x80) { for (i = 0; i < 6; i++) { if (DoC_is_MillenniumPlus(doc)) @@ -1160,7 +1160,7 @@ static inline int __init nftl_partscan(struct mtd_info *mtd, struct mtd_partitio /* NOTE: The lines below modify internal variables of the NAND and MTD layers; variables with have already been configured by nand_scan. Unfortunately, we didn't know before this point what these values - should be. Thus, this code is somewhat dependant on the exact + should be. Thus, this code is somewhat dependent on the exact implementation of the NAND layer. */ if (mh->UnitSizeFactor != 0xff) { this->bbt_erase_shift += (0xff - mh->UnitSizeFactor); diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c index 7a13d42cbabd..537e380b8dcb 100644 --- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/fsl_elbc_nand.c @@ -59,7 +59,7 @@ struct fsl_elbc_mtd { unsigned int fmr; /* FCM Flash Mode Register value */ }; -/* Freescale eLBC FCM controller infomation */ +/* Freescale eLBC FCM controller information */ struct fsl_elbc_fcm_ctrl { struct nand_hw_control controller; diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c index 205b10b9f9b9..0d45ef3883e8 100644 --- a/drivers/mtd/nand/fsmc_nand.c +++ b/drivers/mtd/nand/fsmc_nand.c @@ -335,7 +335,7 @@ static void fsmc_enable_hwecc(struct mtd_info *mtd, int mode) /* * fsmc_read_hwecc_ecc4 - Hardware ECC calculator for ecc4 option supported by - * FSMC. ECC is 13 bytes for 512 bytes of data (supports error correction upto + * FSMC. ECC is 13 bytes for 512 bytes of data (supports error correction up to * max of 8-bits) */ static int fsmc_read_hwecc_ecc4(struct mtd_info *mtd, const uint8_t *data, @@ -381,7 +381,7 @@ static int fsmc_read_hwecc_ecc4(struct mtd_info *mtd, const uint8_t *data, /* * fsmc_read_hwecc_ecc1 - Hardware ECC calculator for ecc1 option supported by - * FSMC. ECC is 3 bytes for 512 bytes of data (supports error correction upto + * FSMC. ECC is 3 bytes for 512 bytes of data (supports error correction up to * max of 1-bit) */ static int fsmc_read_hwecc_ecc1(struct mtd_info *mtd, const uint8_t *data, @@ -408,10 +408,10 @@ static int fsmc_read_hwecc_ecc1(struct mtd_info *mtd, const uint8_t *data, * @buf: buffer to store read data * @page: page number to read * - * This routine is needed for fsmc verison 8 as reading from NAND chip has to be + * This routine is needed for fsmc version 8 as reading from NAND chip has to be * performed in a strict sequence as follows: * data(512 byte) -> ecc(13 byte) - * After this read, fsmc hardware generates and reports error data bits(upto a + * After this read, fsmc hardware generates and reports error data bits(up to a * max of 8 bits) */ static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, @@ -686,7 +686,7 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) } /* - * Scan to find existance of the device + * Scan to find existence of the device */ if (nand_scan_ident(&host->mtd, 1, NULL)) { ret = -ENXIO; diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 85cfc061d41c..c54a4cbac6bc 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -1582,7 +1582,7 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, } /** - * nand_read - [MTD Interface] MTD compability function for nand_do_read_ecc + * nand_read - [MTD Interface] MTD compatibility function for nand_do_read_ecc * @mtd: MTD device structure * @from: offset to read from * @len: number of bytes to read diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c index a1e8b30078d9..af46428286fe 100644 --- a/drivers/mtd/nand/nand_bbt.c +++ b/drivers/mtd/nand/nand_bbt.c @@ -945,7 +945,7 @@ static int check_create(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_desc rd2 = NULL; /* Per chip or per device ? */ chipsel = (td->options & NAND_BBT_PERCHIP) ? i : -1; - /* Mirrored table avilable ? */ + /* Mirrored table available ? */ if (md) { if (td->pages[i] == -1 && md->pages[i] == -1) { writeops = 0x03; diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c index 213181be0d9a..893d95bfea48 100644 --- a/drivers/mtd/nand/nandsim.c +++ b/drivers/mtd/nand/nandsim.c @@ -162,7 +162,7 @@ MODULE_PARM_DESC(bitflips, "Maximum number of random bit flips per page (z MODULE_PARM_DESC(gravepages, "Pages that lose data [: maximum reads (defaults to 3)]" " separated by commas e.g. 1401:2 means page 1401" " can be read only twice before failing"); -MODULE_PARM_DESC(rptwear, "Number of erases inbetween reporting wear, if not zero"); +MODULE_PARM_DESC(rptwear, "Number of erases between reporting wear, if not zero"); MODULE_PARM_DESC(overridesize, "Specifies the NAND Flash size overriding the ID bytes. " "The size is specified in erase blocks and as the exponent of a power of two" " e.g. 5 means a size of 32 erase blocks"); diff --git a/drivers/mtd/nand/nomadik_nand.c b/drivers/mtd/nand/nomadik_nand.c index 8c0b69375224..a045a4a581b6 100644 --- a/drivers/mtd/nand/nomadik_nand.c +++ b/drivers/mtd/nand/nomadik_nand.c @@ -151,7 +151,7 @@ static int nomadik_nand_probe(struct platform_device *pdev) nand->options = pdata->options; /* - * Scan to find existance of the device + * Scan to find existence of the device */ if (nand_scan(&host->mtd, 1)) { ret = -ENXIO; diff --git a/drivers/mtd/nand/pasemi_nand.c b/drivers/mtd/nand/pasemi_nand.c index 59efa829ef24..20bfe5f15afd 100644 --- a/drivers/mtd/nand/pasemi_nand.c +++ b/drivers/mtd/nand/pasemi_nand.c @@ -157,7 +157,7 @@ static int __devinit pasemi_nand_probe(struct platform_device *ofdev) /* Enable the following for a flash based bad block table */ chip->options = NAND_USE_FLASH_BBT | NAND_NO_AUTOINCR; - /* Scan to find existance of the device */ + /* Scan to find existence of the device */ if (nand_scan(pasemi_nand_mtd, 1)) { err = -ENXIO; goto out_lpc; diff --git a/drivers/mtd/nand/plat_nand.c b/drivers/mtd/nand/plat_nand.c index 317aff428e42..caf5a736340a 100644 --- a/drivers/mtd/nand/plat_nand.c +++ b/drivers/mtd/nand/plat_nand.c @@ -95,7 +95,7 @@ static int __devinit plat_nand_probe(struct platform_device *pdev) goto out; } - /* Scan to find existance of the device */ + /* Scan to find existence of the device */ if (nand_scan(&data->mtd, pdata->chip.nr_chips)) { err = -ENXIO; goto out; diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index ab7f4c33ced6..ff0701276d65 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -184,7 +184,7 @@ struct pxa3xx_nand_info { static int use_dma = 1; module_param(use_dma, bool, 0444); -MODULE_PARM_DESC(use_dma, "enable DMA for data transfering to/from NAND HW"); +MODULE_PARM_DESC(use_dma, "enable DMA for data transferring to/from NAND HW"); /* * Default NAND flash controller configuration setup by the diff --git a/drivers/mtd/nand/r852.c b/drivers/mtd/nand/r852.c index 6322d1fb5d62..cae2e013c986 100644 --- a/drivers/mtd/nand/r852.c +++ b/drivers/mtd/nand/r852.c @@ -185,7 +185,7 @@ static void r852_do_dma(struct r852_device *dev, uint8_t *buf, int do_read) dbg_verbose("doing dma %s ", do_read ? "read" : "write"); - /* Set intial dma state: for reading first fill on board buffer, + /* Set initial dma state: for reading first fill on board buffer, from device, for writes first fill the buffer from memory*/ dev->dma_state = do_read ? DMA_INTERNAL : DMA_MEMORY; @@ -766,7 +766,7 @@ static irqreturn_t r852_irq(int irq, void *data) ret = IRQ_HANDLED; dev->card_detected = !!(card_status & R852_CARD_IRQ_INSERT); - /* we shouldn't recieve any interrupts if we wait for card + /* we shouldn't receive any interrupts if we wait for card to settle */ WARN_ON(dev->card_unstable); @@ -794,13 +794,13 @@ static irqreturn_t r852_irq(int irq, void *data) ret = IRQ_HANDLED; if (dma_status & R852_DMA_IRQ_ERROR) { - dbg("recieved dma error IRQ"); + dbg("received dma error IRQ"); r852_dma_done(dev, -EIO); complete(&dev->dma_done); goto out; } - /* recieved DMA interrupt out of nowhere? */ + /* received DMA interrupt out of nowhere? */ WARN_ON_ONCE(dev->dma_stage == 0); if (dev->dma_stage == 0) @@ -960,7 +960,7 @@ int r852_probe(struct pci_dev *pci_dev, const struct pci_device_id *id) &dev->card_detect_work, 0); - printk(KERN_NOTICE DRV_NAME ": driver loaded succesfully\n"); + printk(KERN_NOTICE DRV_NAME ": driver loaded successfully\n"); return 0; error10: diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c index 546c2f0eb2e8..81bbb5ee148d 100644 --- a/drivers/mtd/nand/sh_flctl.c +++ b/drivers/mtd/nand/sh_flctl.c @@ -78,7 +78,7 @@ static void start_translation(struct sh_flctl *flctl) static void timeout_error(struct sh_flctl *flctl, const char *str) { - dev_err(&flctl->pdev->dev, "Timeout occured in %s\n", str); + dev_err(&flctl->pdev->dev, "Timeout occurred in %s\n", str); } static void wait_completion(struct sh_flctl *flctl) diff --git a/drivers/mtd/nand/sm_common.c b/drivers/mtd/nand/sm_common.c index 4a8f367c295c..57cc80cd01a3 100644 --- a/drivers/mtd/nand/sm_common.c +++ b/drivers/mtd/nand/sm_common.c @@ -121,7 +121,7 @@ int sm_register_device(struct mtd_info *mtd, int smartmedia) if (ret) return ret; - /* Bad block marker postion */ + /* Bad block marker position */ chip->badblockpos = 0x05; chip->badblockbits = 7; chip->block_markbad = sm_block_markbad; diff --git a/drivers/mtd/nand/tmio_nand.c b/drivers/mtd/nand/tmio_nand.c index 38fb16771f85..14c578707824 100644 --- a/drivers/mtd/nand/tmio_nand.c +++ b/drivers/mtd/nand/tmio_nand.c @@ -4,7 +4,7 @@ * Slightly murky pre-git history of the driver: * * Copyright (c) Ian Molton 2004, 2005, 2008 - * Original work, independant of sharps code. Included hardware ECC support. + * Original work, independent of sharps code. Included hardware ECC support. * Hard ECC did not work for writes in the early revisions. * Copyright (c) Dirk Opfer 2005. * Modifications developed from sharps code but diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c index f591f615d3f6..1fcb41adab07 100644 --- a/drivers/mtd/onenand/omap2.c +++ b/drivers/mtd/onenand/omap2.c @@ -608,7 +608,7 @@ static int omap2_onenand_enable(struct mtd_info *mtd) ret = regulator_enable(c->regulator); if (ret != 0) - dev_err(&c->pdev->dev, "cant enable regulator\n"); + dev_err(&c->pdev->dev, "can't enable regulator\n"); return ret; } @@ -620,7 +620,7 @@ static int omap2_onenand_disable(struct mtd_info *mtd) ret = regulator_disable(c->regulator); if (ret != 0) - dev_err(&c->pdev->dev, "cant disable regulator\n"); + dev_err(&c->pdev->dev, "can't disable regulator\n"); return ret; } diff --git a/drivers/mtd/onenand/onenand_sim.c b/drivers/mtd/onenand/onenand_sim.c index 8b246061d511..5ef3bd547772 100644 --- a/drivers/mtd/onenand/onenand_sim.c +++ b/drivers/mtd/onenand/onenand_sim.c @@ -321,7 +321,7 @@ static void onenand_data_handle(struct onenand_chip *this, int cmd, continue; if (memcmp(dest + off, ffchars, this->subpagesize) && onenand_check_overwrite(dest + off, src + off, this->subpagesize)) - printk(KERN_ERR "over-write happend at 0x%08x\n", offset); + printk(KERN_ERR "over-write happened at 0x%08x\n", offset); memcpy(dest + off, src + off, this->subpagesize); } /* Fall through */ @@ -335,7 +335,7 @@ static void onenand_data_handle(struct onenand_chip *this, int cmd, dest = ONENAND_CORE_SPARE(flash, this, offset); if (memcmp(dest, ffchars, mtd->oobsize) && onenand_check_overwrite(dest, src, mtd->oobsize)) - printk(KERN_ERR "OOB: over-write happend at 0x%08x\n", + printk(KERN_ERR "OOB: over-write happened at 0x%08x\n", offset); memcpy(dest, src, mtd->oobsize); break; diff --git a/drivers/mtd/sm_ftl.c b/drivers/mtd/sm_ftl.c index 2b0daae4018d..ed3d6cd2c6dc 100644 --- a/drivers/mtd/sm_ftl.c +++ b/drivers/mtd/sm_ftl.c @@ -540,7 +540,7 @@ static int sm_check_block(struct sm_ftl *ftl, int zone, int block) return -EIO; } - /* If the block is sliced (partialy erased usually) erase it */ + /* If the block is sliced (partially erased usually) erase it */ if (i == 2) { sm_erase_block(ftl, zone, block, 1); return 1; @@ -878,7 +878,7 @@ static int sm_init_zone(struct sm_ftl *ftl, int zone_num) return 0; } -/* Get and automaticly initialize an FTL mapping for one zone */ +/* Get and automatically initialize an FTL mapping for one zone */ struct ftl_zone *sm_get_zone(struct sm_ftl *ftl, int zone_num) { struct ftl_zone *zone; diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c index 11eb8ef12485..d2d12ab7def4 100644 --- a/drivers/mtd/ubi/scan.c +++ b/drivers/mtd/ubi/scan.c @@ -968,7 +968,7 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si, * contains garbage because of a power cut during erase * operation. So we just schedule this PEB for erasure. * - * Besides, in case of NOR flash, we deliberatly + * Besides, in case of NOR flash, we deliberately * corrupt both headers because NOR flash erasure is * slow and can start from the end. */ -- cgit v1.2.2