From 0c53b4e7e25a2635aef3006b990b6802cefc873f Mon Sep 17 00:00:00 2001 From: Frans Klaver Date: Mon, 27 Oct 2014 15:34:05 +0100 Subject: mtd: omap: fix mtd devices not showing up Since commit 6d178ef2fd5e ("mtd: nand: Move ELM driver and rename as omap_elm"), I don't have any mtd devices present on my am335x. This changes the link order of the omap_elm and omap2 objects, causing them to probe in the wrong order. To fix this, make elm_config defer probing until the omap_elm driver is actually loaded. Signed-off-by: Frans Klaver Acked-by: Roger Quadros Signed-off-by: Brian Norris --- drivers/mtd/nand/omap_elm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/nand/omap_elm.c b/drivers/mtd/nand/omap_elm.c index b4f61c7fc161..058531044ceb 100644 --- a/drivers/mtd/nand/omap_elm.c +++ b/drivers/mtd/nand/omap_elm.c @@ -115,7 +115,7 @@ int elm_config(struct device *dev, enum bch_ecc bch_type, if (!info) { dev_err(dev, "Unable to configure elm - device not probed?\n"); - return -ENODEV; + return -EPROBE_DEFER; } /* ELM cannot detect ECC errors for chunks > 1KB */ if (ecc_step_size > ((ELM_ECC_SIZE + 1) / 2)) { -- cgit v1.2.2 From 89cf38dd536a7301d6b5f5ddd73f42074c01bfaa Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Thu, 23 Oct 2014 01:23:01 +0200 Subject: mtd: cfi_cmdset_0001.c: fix resume for LH28F640BF chips After '#echo mem > /sys/power/state' some devices can not be properly resumed because apparently the MTD Partition Configuration Register has been reset to default thus the rootfs cannot be mounted cleanly on resume. An example of this can be found in the SA-1100 Developer's Manual at 9.5.3.3 where the second step of the Sleep Shutdown Sequence is described: "An internal reset is applied to the SA-1100. All units are reset...". As workaround we refresh the PCR value as done initially on chip setup. This behavior and the fix are confirmed by our tests done on 2 different Zaurus collie units with kernel 3.17. Fixes: 812c5fa82bae: ("mtd: cfi_cmdset_0001.c: add support for Sharp LH28F640BF NOR") Signed-off-by: Dmitry Eremin-Solenikov Signed-off-by: Andrea Adami Cc: # 3.16+ Signed-off-by: Brian Norris --- drivers/mtd/chips/cfi_cmdset_0001.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/mtd') diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c index a7543ba3e190..3096f3ded3ad 100644 --- a/drivers/mtd/chips/cfi_cmdset_0001.c +++ b/drivers/mtd/chips/cfi_cmdset_0001.c @@ -2590,6 +2590,8 @@ static void cfi_intelext_resume(struct mtd_info *mtd) /* Go to known state. Chip may have been power cycled */ if (chip->state == FL_PM_SUSPENDED) { + /* Refresh LH28F640BF Partition Config. Register */ + fixup_LH28F640BF(mtd); map_write(map, CMD(0xFF), cfi->chips[i].start); chip->oldstate = chip->state = FL_READY; wake_up(&chip->wq); -- cgit v1.2.2