From 14448005abd10887a2d361e20e04760dc3d8482f Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Wed, 2 May 2007 12:04:57 +0100 Subject: [MTD] [NAND] Rename cafe.c to cafe_nand.c and remove the multi-obj magic Signed-off-by: David Woodhouse --- drivers/mtd/nand/Makefile | 1 - drivers/mtd/nand/cafe.c | 838 ------------------------------------------- drivers/mtd/nand/cafe_nand.c | 838 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 838 insertions(+), 839 deletions(-) delete mode 100644 drivers/mtd/nand/cafe.c create mode 100644 drivers/mtd/nand/cafe_nand.c (limited to 'drivers/mtd') diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index 79e9e5da1c08..de1424b06b99 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -28,4 +28,3 @@ obj-$(CONFIG_MTD_NAND_CM_X270) += cmx270_nand.o obj-$(CONFIG_MTD_NAND_BASLER_EXCITE) += excite_nandflash.o nand-objs := nand_base.o nand_bbt.o -cafe_nand-objs := cafe.o diff --git a/drivers/mtd/nand/cafe.c b/drivers/mtd/nand/cafe.c deleted file mode 100644 index 05f6ec9f5aa7..000000000000 --- a/drivers/mtd/nand/cafe.c +++ /dev/null @@ -1,838 +0,0 @@ -/* - * Driver for One Laptop Per Child ‘CAFÉ’ controller, aka Marvell 88ALP01 - * - * Copyright © 2006 Red Hat, Inc. - * Copyright © 2006 David Woodhouse - */ - -#define DEBUG - -#include -#undef DEBUG -#include -#include -#include -#include -#include -#include -#include -#include - -#define CAFE_NAND_CTRL1 0x00 -#define CAFE_NAND_CTRL2 0x04 -#define CAFE_NAND_CTRL3 0x08 -#define CAFE_NAND_STATUS 0x0c -#define CAFE_NAND_IRQ 0x10 -#define CAFE_NAND_IRQ_MASK 0x14 -#define CAFE_NAND_DATA_LEN 0x18 -#define CAFE_NAND_ADDR1 0x1c -#define CAFE_NAND_ADDR2 0x20 -#define CAFE_NAND_TIMING1 0x24 -#define CAFE_NAND_TIMING2 0x28 -#define CAFE_NAND_TIMING3 0x2c -#define CAFE_NAND_NONMEM 0x30 -#define CAFE_NAND_ECC_RESULT 0x3C -#define CAFE_NAND_DMA_CTRL 0x40 -#define CAFE_NAND_DMA_ADDR0 0x44 -#define CAFE_NAND_DMA_ADDR1 0x48 -#define CAFE_NAND_ECC_SYN01 0x50 -#define CAFE_NAND_ECC_SYN23 0x54 -#define CAFE_NAND_ECC_SYN45 0x58 -#define CAFE_NAND_ECC_SYN67 0x5c -#define CAFE_NAND_READ_DATA 0x1000 -#define CAFE_NAND_WRITE_DATA 0x2000 - -#define CAFE_GLOBAL_CTRL 0x3004 -#define CAFE_GLOBAL_IRQ 0x3008 -#define CAFE_GLOBAL_IRQ_MASK 0x300c -#define CAFE_NAND_RESET 0x3034 - -struct cafe_priv { - struct nand_chip nand; - struct pci_dev *pdev; - void __iomem *mmio; - struct rs_control *rs; - uint32_t ctl1; - uint32_t ctl2; - int datalen; - int nr_data; - int data_pos; - int page_addr; - dma_addr_t dmaaddr; - unsigned char *dmabuf; -}; - -static int usedma = 1; -module_param(usedma, int, 0644); - -static int skipbbt = 0; -module_param(skipbbt, int, 0644); - -static int debug = 0; -module_param(debug, int, 0644); - -static int regdebug = 0; -module_param(regdebug, int, 0644); - -static int checkecc = 1; -module_param(checkecc, int, 0644); - -static int numtimings; -static int timing[3]; -module_param_array(timing, int, &numtimings, 0644); - -/* Hrm. Why isn't this already conditional on something in the struct device? */ -#define cafe_dev_dbg(dev, args...) do { if (debug) dev_dbg(dev, ##args); } while(0) - -/* Make it easier to switch to PIO if we need to */ -#define cafe_readl(cafe, addr) readl((cafe)->mmio + CAFE_##addr) -#define cafe_writel(cafe, datum, addr) writel(datum, (cafe)->mmio + CAFE_##addr) - -static int cafe_device_ready(struct mtd_info *mtd) -{ - struct cafe_priv *cafe = mtd->priv; - int result = !!(cafe_readl(cafe, NAND_STATUS) | 0x40000000); - uint32_t irqs = cafe_readl(cafe, NAND_IRQ); - - cafe_writel(cafe, irqs, NAND_IRQ); - - cafe_dev_dbg(&cafe->pdev->dev, "NAND device is%s ready, IRQ %x (%x) (%x,%x)\n", - result?"":" not", irqs, cafe_readl(cafe, NAND_IRQ), - cafe_readl(cafe, GLOBAL_IRQ), cafe_readl(cafe, GLOBAL_IRQ_MASK)); - - return result; -} - - -static void cafe_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) -{ - struct cafe_priv *cafe = mtd->priv; - - if (usedma) - memcpy(cafe->dmabuf + cafe->datalen, buf, len); - else - memcpy_toio(cafe->mmio + CAFE_NAND_WRITE_DATA + cafe->datalen, buf, len); - - cafe->datalen += len; - - cafe_dev_dbg(&cafe->pdev->dev, "Copy 0x%x bytes to write buffer. datalen 0x%x\n", - len, cafe->datalen); -} - -static void cafe_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) -{ - struct cafe_priv *cafe = mtd->priv; - - if (usedma) - memcpy(buf, cafe->dmabuf + cafe->datalen, len); - else - memcpy_fromio(buf, cafe->mmio + CAFE_NAND_READ_DATA + cafe->datalen, len); - - cafe_dev_dbg(&cafe->pdev->dev, "Copy 0x%x bytes from position 0x%x in read buffer.\n", - len, cafe->datalen); - cafe->datalen += len; -} - -static uint8_t cafe_read_byte(struct mtd_info *mtd) -{ - struct cafe_priv *cafe = mtd->priv; - uint8_t d; - - cafe_read_buf(mtd, &d, 1); - cafe_dev_dbg(&cafe->pdev->dev, "Read %02x\n", d); - - return d; -} - -static void cafe_nand_cmdfunc(struct mtd_info *mtd, unsigned command, - int column, int page_addr) -{ - struct cafe_priv *cafe = mtd->priv; - int adrbytes = 0; - uint32_t ctl1; - uint32_t doneint = 0x80000000; - - cafe_dev_dbg(&cafe->pdev->dev, "cmdfunc %02x, 0x%x, 0x%x\n", - command, column, page_addr); - - if (command == NAND_CMD_ERASE2 || command == NAND_CMD_PAGEPROG) { - /* Second half of a command we already calculated */ - cafe_writel(cafe, cafe->ctl2 | 0x100 | command, NAND_CTRL2); - ctl1 = cafe->ctl1; - cafe->ctl2 &= ~(1<<30); - cafe_dev_dbg(&cafe->pdev->dev, "Continue command, ctl1 %08x, #data %d\n", - cafe->ctl1, cafe->nr_data); - goto do_command; - } - /* Reset ECC engine */ - cafe_writel(cafe, 0, NAND_CTRL2); - - /* Emulate NAND_CMD_READOOB on large-page chips */ - if (mtd->writesize > 512 && - command == NAND_CMD_READOOB) { - column += mtd->writesize; - command = NAND_CMD_READ0; - } - - /* FIXME: Do we need to send read command before sending data - for small-page chips, to position the buffer correctly? */ - - if (column != -1) { - cafe_writel(cafe, column, NAND_ADDR1); - adrbytes = 2; - if (page_addr != -1) - goto write_adr2; - } else if (page_addr != -1) { - cafe_writel(cafe, page_addr & 0xffff, NAND_ADDR1); - page_addr >>= 16; - write_adr2: - cafe_writel(cafe, page_addr, NAND_ADDR2); - adrbytes += 2; - if (mtd->size > mtd->writesize << 16) - adrbytes++; - } - - cafe->data_pos = cafe->datalen = 0; - - /* Set command valid bit */ - ctl1 = 0x80000000 | command; - - /* Set RD or WR bits as appropriate */ - if (command == NAND_CMD_READID || command == NAND_CMD_STATUS) { - ctl1 |= (1<<26); /* rd */ - /* Always 5 bytes, for now */ - cafe->datalen = 4; - /* And one address cycle -- even for STATUS, since the controller doesn't work without */ - adrbytes = 1; - } else if (command == NAND_CMD_READ0 || command == NAND_CMD_READ1 || - command == NAND_CMD_READOOB || command == NAND_CMD_RNDOUT) { - ctl1 |= 1<<26; /* rd */ - /* For now, assume just read to end of page */ - cafe->datalen = mtd->writesize + mtd->oobsize - column; - } else if (command == NAND_CMD_SEQIN) - ctl1 |= 1<<25; /* wr */ - - /* Set number of address bytes */ - if (adrbytes) - ctl1 |= ((adrbytes-1)|8) << 27; - - if (command == NAND_CMD_SEQIN || command == NAND_CMD_ERASE1) { - /* Ignore the first command of a pair; the hardware - deals with them both at once, later */ - cafe->ctl1 = ctl1; - cafe_dev_dbg(&cafe->pdev->dev, "Setup for delayed command, ctl1 %08x, dlen %x\n", - cafe->ctl1, cafe->datalen); - return; - } - /* RNDOUT and READ0 commands need a following byte */ - if (command == NAND_CMD_RNDOUT) - cafe_writel(cafe, cafe->ctl2 | 0x100 | NAND_CMD_RNDOUTSTART, NAND_CTRL2); - else if (command == NAND_CMD_READ0 && mtd->writesize > 512) - cafe_writel(cafe, cafe->ctl2 | 0x100 | NAND_CMD_READSTART, NAND_CTRL2); - - do_command: - cafe_dev_dbg(&cafe->pdev->dev, "dlen %x, ctl1 %x, ctl2 %x\n", - cafe->datalen, ctl1, cafe_readl(cafe, NAND_CTRL2)); - - /* NB: The datasheet lies -- we really should be subtracting 1 here */ - cafe_writel(cafe, cafe->datalen, NAND_DATA_LEN); - cafe_writel(cafe, 0x90000000, NAND_IRQ); - if (usedma && (ctl1 & (3<<25))) { - uint32_t dmactl = 0xc0000000 + cafe->datalen; - /* If WR or RD bits set, set up DMA */ - if (ctl1 & (1<<26)) { - /* It's a read */ - dmactl |= (1<<29); - /* ... so it's done when the DMA is done, not just - the command. */ - doneint = 0x10000000; - } - cafe_writel(cafe, dmactl, NAND_DMA_CTRL); - } - cafe->datalen = 0; - - if (unlikely(regdebug)) { - int i; - printk("About to write command %08x to register 0\n", ctl1); - for (i=4; i< 0x5c; i+=4) - printk("Register %x: %08x\n", i, readl(cafe->mmio + i)); - } - - cafe_writel(cafe, ctl1, NAND_CTRL1); - /* Apply this short delay always to ensure that we do wait tWB in - * any case on any machine. */ - ndelay(100); - - if (1) { - int c; - uint32_t irqs; - - for (c = 500000; c != 0; c--) { - irqs = cafe_readl(cafe, NAND_IRQ); - if (irqs & doneint) - break; - udelay(1); - if (!(c % 100000)) - cafe_dev_dbg(&cafe->pdev->dev, "Wait for ready, IRQ %x\n", irqs); - cpu_relax(); - } - cafe_writel(cafe, doneint, NAND_IRQ); - cafe_dev_dbg(&cafe->pdev->dev, "Command %x completed after %d usec, irqs %x (%x)\n", - command, 500000-c, irqs, cafe_readl(cafe, NAND_IRQ)); - } - - WARN_ON(cafe->ctl2 & (1<<30)); - - switch (command) { - - case NAND_CMD_CACHEDPROG: - case NAND_CMD_PAGEPROG: - case NAND_CMD_ERASE1: - case NAND_CMD_ERASE2: - case NAND_CMD_SEQIN: - case NAND_CMD_RNDIN: - case NAND_CMD_STATUS: - case NAND_CMD_DEPLETE1: - case NAND_CMD_RNDOUT: - case NAND_CMD_STATUS_ERROR: - case NAND_CMD_STATUS_ERROR0: - case NAND_CMD_STATUS_ERROR1: - case NAND_CMD_STATUS_ERROR2: - case NAND_CMD_STATUS_ERROR3: - cafe_writel(cafe, cafe->ctl2, NAND_CTRL2); - return; - } - nand_wait_ready(mtd); - cafe_writel(cafe, cafe->ctl2, NAND_CTRL2); -} - -static void cafe_select_chip(struct mtd_info *mtd, int chipnr) -{ - //struct cafe_priv *cafe = mtd->priv; - // cafe_dev_dbg(&cafe->pdev->dev, "select_chip %d\n", chipnr); -} - -static int cafe_nand_interrupt(int irq, void *id) -{ - struct mtd_info *mtd = id; - struct cafe_priv *cafe = mtd->priv; - uint32_t irqs = cafe_readl(cafe, NAND_IRQ); - cafe_writel(cafe, irqs & ~0x90000000, NAND_IRQ); - if (!irqs) - return IRQ_NONE; - - cafe_dev_dbg(&cafe->pdev->dev, "irq, bits %x (%x)\n", irqs, cafe_readl(cafe, NAND_IRQ)); - return IRQ_HANDLED; -} - -static void cafe_nand_bug(struct mtd_info *mtd) -{ - BUG(); -} - -static int cafe_nand_write_oob(struct mtd_info *mtd, - struct nand_chip *chip, int page) -{ - int status = 0; - - chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize, page); - chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); - chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); - status = chip->waitfunc(mtd, chip); - - return status & NAND_STATUS_FAIL ? -EIO : 0; -} - -/* Don't use -- use nand_read_oob_std for now */ -static int cafe_nand_read_oob(struct mtd_info *mtd, struct nand_chip *chip, - int page, int sndcmd) -{ - chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page); - chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); - return 1; -} -/** - * cafe_nand_read_page_syndrome - {REPLACABLE] hardware ecc syndrom based page read - * @mtd: mtd info structure - * @chip: nand chip info structure - * @buf: buffer to store read data - * - * The hw generator calculates the error syndrome automatically. Therefor - * we need a special oob layout and handling. - */ -static int cafe_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf) -{ - struct cafe_priv *cafe = mtd->priv; - - cafe_dev_dbg(&cafe->pdev->dev, "ECC result %08x SYN1,2 %08x\n", - cafe_readl(cafe, NAND_ECC_RESULT), - cafe_readl(cafe, NAND_ECC_SYN01)); - - chip->read_buf(mtd, buf, mtd->writesize); - chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); - - if (checkecc && cafe_readl(cafe, NAND_ECC_RESULT) & (1<<18)) { - unsigned short syn[8], pat[4]; - int pos[4]; - u8 *oob = chip->oob_poi; - int i, n; - - for (i=0; i<8; i+=2) { - uint32_t tmp = cafe_readl(cafe, NAND_ECC_SYN01 + (i*2)); - syn[i] = cafe->rs->index_of[tmp & 0xfff]; - syn[i+1] = cafe->rs->index_of[(tmp >> 16) & 0xfff]; - } - - n = decode_rs16(cafe->rs, NULL, NULL, 1367, syn, 0, pos, 0, - pat); - - for (i = 0; i < n; i++) { - int p = pos[i]; - - /* The 12-bit symbols are mapped to bytes here */ - - if (p > 1374) { - /* out of range */ - n = -1374; - } else if (p == 0) { - /* high four bits do not correspond to data */ - if (pat[i] > 0xff) - n = -2048; - else - buf[0] ^= pat[i]; - } else if (p == 1365) { - buf[2047] ^= pat[i] >> 4; - oob[0] ^= pat[i] << 4; - } else if (p > 1365) { - if ((p & 1) == 1) { - oob[3*p/2 - 2048] ^= pat[i] >> 4; - oob[3*p/2 - 2047] ^= pat[i] << 4; - } else { - oob[3*p/2 - 2049] ^= pat[i] >> 8; - oob[3*p/2 - 2048] ^= pat[i]; - } - } else if ((p & 1) == 1) { - buf[3*p/2] ^= pat[i] >> 4; - buf[3*p/2 + 1] ^= pat[i] << 4; - } else { - buf[3*p/2 - 1] ^= pat[i] >> 8; - buf[3*p/2] ^= pat[i]; - } - } - - if (n < 0) { - dev_dbg(&cafe->pdev->dev, "Failed to correct ECC at %08x\n", - cafe_readl(cafe, NAND_ADDR2) * 2048); - for (i = 0; i < 0x5c; i += 4) - printk("Register %x: %08x\n", i, readl(cafe->mmio + i)); - mtd->ecc_stats.failed++; - } else { - dev_dbg(&cafe->pdev->dev, "Corrected %d symbol errors\n", n); - mtd->ecc_stats.corrected += n; - } - } - - return 0; -} - -static struct nand_ecclayout cafe_oobinfo_2048 = { - .eccbytes = 14, - .eccpos = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13}, - .oobfree = {{14, 50}} -}; - -/* Ick. The BBT code really ought to be able to work this bit out - for itself from the above, at least for the 2KiB case */ -static uint8_t cafe_bbt_pattern_2048[] = { 'B', 'b', 't', '0' }; -static uint8_t cafe_mirror_pattern_2048[] = { '1', 't', 'b', 'B' }; - -static uint8_t cafe_bbt_pattern_512[] = { 0xBB }; -static uint8_t cafe_mirror_pattern_512[] = { 0xBC }; - - -static struct nand_bbt_descr cafe_bbt_main_descr_2048 = { - .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE - | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP, - .offs = 14, - .len = 4, - .veroffs = 18, - .maxblocks = 4, - .pattern = cafe_bbt_pattern_2048 -}; - -static struct nand_bbt_descr cafe_bbt_mirror_descr_2048 = { - .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE - | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP, - .offs = 14, - .len = 4, - .veroffs = 18, - .maxblocks = 4, - .pattern = cafe_mirror_pattern_2048 -}; - -static struct nand_ecclayout cafe_oobinfo_512 = { - .eccbytes = 14, - .eccpos = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13}, - .oobfree = {{14, 2}} -}; - -static struct nand_bbt_descr cafe_bbt_main_descr_512 = { - .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE - | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP, - .offs = 14, - .len = 1, - .veroffs = 15, - .maxblocks = 4, - .pattern = cafe_bbt_pattern_512 -}; - -static struct nand_bbt_descr cafe_bbt_mirror_descr_512 = { - .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE - | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP, - .offs = 14, - .len = 1, - .veroffs = 15, - .maxblocks = 4, - .pattern = cafe_mirror_pattern_512 -}; - - -static void cafe_nand_write_page_lowlevel(struct mtd_info *mtd, - struct nand_chip *chip, const uint8_t *buf) -{ - struct cafe_priv *cafe = mtd->priv; - - chip->write_buf(mtd, buf, mtd->writesize); - chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); - - /* Set up ECC autogeneration */ - cafe->ctl2 |= (1<<30); -} - -static int cafe_nand_write_page(struct mtd_info *mtd, struct nand_chip *chip, - const uint8_t *buf, int page, int cached, int raw) -{ - int status; - - chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page); - - if (unlikely(raw)) - chip->ecc.write_page_raw(mtd, chip, buf); - else - chip->ecc.write_page(mtd, chip, buf); - - /* - * Cached progamming disabled for now, Not sure if its worth the - * trouble. The speed gain is not very impressive. (2.3->2.6Mib/s) - */ - cached = 0; - - if (!cached || !(chip->options & NAND_CACHEPRG)) { - - chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); - status = chip->waitfunc(mtd, chip); - /* - * See if operation failed and additional status checks are - * available - */ - if ((status & NAND_STATUS_FAIL) && (chip->errstat)) - status = chip->errstat(mtd, chip, FL_WRITING, status, - page); - - if (status & NAND_STATUS_FAIL) - return -EIO; - } else { - chip->cmdfunc(mtd, NAND_CMD_CACHEDPROG, -1, -1); - status = chip->waitfunc(mtd, chip); - } - -#ifdef CONFIG_MTD_NAND_VERIFY_WRITE - /* Send command to read back the data */ - chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page); - - if (chip->verify_buf(mtd, buf, mtd->writesize)) - return -EIO; -#endif - return 0; -} - -static int cafe_nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip) -{ - return 0; -} - -/* F_2[X]/(X**6+X+1) */ -static unsigned short __devinit gf64_mul(u8 a, u8 b) -{ - u8 c; - unsigned int i; - - c = 0; - for (i = 0; i < 6; i++) { - if (a & 1) - c ^= b; - a >>= 1; - b <<= 1; - if ((b & 0x40) != 0) - b ^= 0x43; - } - - return c; -} - -/* F_64[X]/(X**2+X+A**-1) with A the generator of F_64[X] */ -static u16 __devinit gf4096_mul(u16 a, u16 b) -{ - u8 ah, al, bh, bl, ch, cl; - - ah = a >> 6; - al = a & 0x3f; - bh = b >> 6; - bl = b & 0x3f; - - ch = gf64_mul(ah ^ al, bh ^ bl) ^ gf64_mul(al, bl); - cl = gf64_mul(gf64_mul(ah, bh), 0x21) ^ gf64_mul(al, bl); - - return (ch << 6) ^ cl; -} - -static int __devinit cafe_mul(int x) -{ - if (x == 0) - return 1; - return gf4096_mul(x, 0xe01); -} - -static int __devinit cafe_nand_probe(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - struct mtd_info *mtd; - struct cafe_priv *cafe; - uint32_t ctrl; - int err = 0; - - err = pci_enable_device(pdev); - if (err) - return err; - - pci_set_master(pdev); - - mtd = kzalloc(sizeof(*mtd) + sizeof(struct cafe_priv), GFP_KERNEL); - if (!mtd) { - dev_warn(&pdev->dev, "failed to alloc mtd_info\n"); - return -ENOMEM; - } - cafe = (void *)(&mtd[1]); - - mtd->priv = cafe; - mtd->owner = THIS_MODULE; - - cafe->pdev = pdev; - cafe->mmio = pci_iomap(pdev, 0, 0); - if (!cafe->mmio) { - dev_warn(&pdev->dev, "failed to iomap\n"); - err = -ENOMEM; - goto out_free_mtd; - } - cafe->dmabuf = dma_alloc_coherent(&cafe->pdev->dev, 2112 + sizeof(struct nand_buffers), - &cafe->dmaaddr, GFP_KERNEL); - if (!cafe->dmabuf) { - err = -ENOMEM; - goto out_ior; - } - cafe->nand.buffers = (void *)cafe->dmabuf + 2112; - - cafe->rs = init_rs_non_canonical(12, &cafe_mul, 0, 1, 8); - if (!cafe->rs) { - err = -ENOMEM; - goto out_ior; - } - - cafe->nand.cmdfunc = cafe_nand_cmdfunc; - cafe->nand.dev_ready = cafe_device_ready; - cafe->nand.read_byte = cafe_read_byte; - cafe->nand.read_buf = cafe_read_buf; - cafe->nand.write_buf = cafe_write_buf; - cafe->nand.select_chip = cafe_select_chip; - - cafe->nand.chip_delay = 0; - - /* Enable the following for a flash based bad block table */ - cafe->nand.options = NAND_USE_FLASH_BBT | NAND_NO_AUTOINCR | NAND_OWN_BUFFERS; - - if (skipbbt) { - cafe->nand.options |= NAND_SKIP_BBTSCAN; - cafe->nand.block_bad = cafe_nand_block_bad; - } - - if (numtimings && numtimings != 3) { - dev_warn(&cafe->pdev->dev, "%d timing register values ignored; precisely three are required\n", numtimings); - } - - if (numtimings == 3) { - cafe_dev_dbg(&cafe->pdev->dev, "Using provided timings (%08x %08x %08x)\n", - timing[0], timing[1], timing[2]); - } else { - timing[0] = cafe_readl(cafe, NAND_TIMING1); - timing[1] = cafe_readl(cafe, NAND_TIMING2); - timing[2] = cafe_readl(cafe, NAND_TIMING3); - - if (timing[0] | timing[1] | timing[2]) { - cafe_dev_dbg(&cafe->pdev->dev, "Timing registers already set (%08x %08x %08x)\n", - timing[0], timing[1], timing[2]); - } else { - dev_warn(&cafe->pdev->dev, "Timing registers unset; using most conservative defaults\n"); - timing[0] = timing[1] = timing[2] = 0xffffffff; - } - } - - /* Start off by resetting the NAND controller completely */ - cafe_writel(cafe, 1, NAND_RESET); - cafe_writel(cafe, 0, NAND_RESET); - - cafe_writel(cafe, timing[0], NAND_TIMING1); - cafe_writel(cafe, timing[1], NAND_TIMING2); - cafe_writel(cafe, timing[2], NAND_TIMING3); - - cafe_writel(cafe, 0xffffffff, NAND_IRQ_MASK); - err = request_irq(pdev->irq, &cafe_nand_interrupt, IRQF_SHARED, - "CAFE NAND", mtd); - if (err) { - dev_warn(&pdev->dev, "Could not register IRQ %d\n", pdev->irq); - goto out_free_dma; - } - - /* Disable master reset, enable NAND clock */ - ctrl = cafe_readl(cafe, GLOBAL_CTRL); - ctrl &= 0xffffeff0; - ctrl |= 0x00007000; - cafe_writel(cafe, ctrl | 0x05, GLOBAL_CTRL); - cafe_writel(cafe, ctrl | 0x0a, GLOBAL_CTRL); - cafe_writel(cafe, 0, NAND_DMA_CTRL); - - cafe_writel(cafe, 0x7006, GLOBAL_CTRL); - cafe_writel(cafe, 0x700a, GLOBAL_CTRL); - - /* Set up DMA address */ - cafe_writel(cafe, cafe->dmaaddr & 0xffffffff, NAND_DMA_ADDR0); - if (sizeof(cafe->dmaaddr) > 4) - /* Shift in two parts to shut the compiler up */ - cafe_writel(cafe, (cafe->dmaaddr >> 16) >> 16, NAND_DMA_ADDR1); - else - cafe_writel(cafe, 0, NAND_DMA_ADDR1); - - cafe_dev_dbg(&cafe->pdev->dev, "Set DMA address to %x (virt %p)\n", - cafe_readl(cafe, NAND_DMA_ADDR0), cafe->dmabuf); - - /* Enable NAND IRQ in global IRQ mask register */ - cafe_writel(cafe, 0x80000007, GLOBAL_IRQ_MASK); - cafe_dev_dbg(&cafe->pdev->dev, "Control %x, IRQ mask %x\n", - cafe_readl(cafe, GLOBAL_CTRL), cafe_readl(cafe, GLOBAL_IRQ_MASK)); - - /* Scan to find existence of the device */ - if (nand_scan_ident(mtd, 1)) { - err = -ENXIO; - goto out_irq; - } - - cafe->ctl2 = 1<<27; /* Reed-Solomon ECC */ - if (mtd->writesize == 2048) - cafe->ctl2 |= 1<<29; /* 2KiB page size */ - - /* Set up ECC according to the type of chip we found */ - if (mtd->writesize == 2048) { - cafe->nand.ecc.layout = &cafe_oobinfo_2048; - cafe->nand.bbt_td = &cafe_bbt_main_descr_2048; - cafe->nand.bbt_md = &cafe_bbt_mirror_descr_2048; - } else if (mtd->writesize == 512) { - cafe->nand.ecc.layout = &cafe_oobinfo_512; - cafe->nand.bbt_td = &cafe_bbt_main_descr_512; - cafe->nand.bbt_md = &cafe_bbt_mirror_descr_512; - } else { - printk(KERN_WARNING "Unexpected NAND flash writesize %d. Aborting\n", - mtd->writesize); - goto out_irq; - } - cafe->nand.ecc.mode = NAND_ECC_HW_SYNDROME; - cafe->nand.ecc.size = mtd->writesize; - cafe->nand.ecc.bytes = 14; - cafe->nand.ecc.hwctl = (void *)cafe_nand_bug; - cafe->nand.ecc.calculate = (void *)cafe_nand_bug; - cafe->nand.ecc.correct = (void *)cafe_nand_bug; - cafe->nand.write_page = cafe_nand_write_page; - cafe->nand.ecc.write_page = cafe_nand_write_page_lowlevel; - cafe->nand.ecc.write_oob = cafe_nand_write_oob; - cafe->nand.ecc.read_page = cafe_nand_read_page; - cafe->nand.ecc.read_oob = cafe_nand_read_oob; - - err = nand_scan_tail(mtd); - if (err) - goto out_irq; - - pci_set_drvdata(pdev, mtd); - add_mtd_device(mtd); - goto out; - - out_irq: - /* Disable NAND IRQ in global IRQ mask register */ - cafe_writel(cafe, ~1 & cafe_readl(cafe, GLOBAL_IRQ_MASK), GLOBAL_IRQ_MASK); - free_irq(pdev->irq, mtd); - out_free_dma: - dma_free_coherent(&cafe->pdev->dev, 2112, cafe->dmabuf, cafe->dmaaddr); - out_ior: - pci_iounmap(pdev, cafe->mmio); - out_free_mtd: - kfree(mtd); - out: - return err; -} - -static void __devexit cafe_nand_remove(struct pci_dev *pdev) -{ - struct mtd_info *mtd = pci_get_drvdata(pdev); - struct cafe_priv *cafe = mtd->priv; - - del_mtd_device(mtd); - /* Disable NAND IRQ in global IRQ mask register */ - cafe_writel(cafe, ~1 & cafe_readl(cafe, GLOBAL_IRQ_MASK), GLOBAL_IRQ_MASK); - free_irq(pdev->irq, mtd); - nand_release(mtd); - free_rs(cafe->rs); - pci_iounmap(pdev, cafe->mmio); - dma_free_coherent(&cafe->pdev->dev, 2112, cafe->dmabuf, cafe->dmaaddr); - kfree(mtd); -} - -static struct pci_device_id cafe_nand_tbl[] = { - { 0x11ab, 0x4100, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_MEMORY_FLASH << 8, 0xFFFF0 } -}; - -MODULE_DEVICE_TABLE(pci, cafe_nand_tbl); - -static struct pci_driver cafe_nand_pci_driver = { - .name = "CAFÉ NAND", - .id_table = cafe_nand_tbl, - .probe = cafe_nand_probe, - .remove = __devexit_p(cafe_nand_remove), -#ifdef CONFIG_PMx - .suspend = cafe_nand_suspend, - .resume = cafe_nand_resume, -#endif -}; - -static int cafe_nand_init(void) -{ - return pci_register_driver(&cafe_nand_pci_driver); -} - -static void cafe_nand_exit(void) -{ - pci_unregister_driver(&cafe_nand_pci_driver); -} -module_init(cafe_nand_init); -module_exit(cafe_nand_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("David Woodhouse "); -MODULE_DESCRIPTION("NAND flash driver for OLPC CAFÉ chip"); diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c new file mode 100644 index 000000000000..05f6ec9f5aa7 --- /dev/null +++ b/drivers/mtd/nand/cafe_nand.c @@ -0,0 +1,838 @@ +/* + * Driver for One Laptop Per Child ‘CAFÉ’ controller, aka Marvell 88ALP01 + * + * Copyright © 2006 Red Hat, Inc. + * Copyright © 2006 David Woodhouse + */ + +#define DEBUG + +#include +#undef DEBUG +#include +#include +#include +#include +#include +#include +#include +#include + +#define CAFE_NAND_CTRL1 0x00 +#define CAFE_NAND_CTRL2 0x04 +#define CAFE_NAND_CTRL3 0x08 +#define CAFE_NAND_STATUS 0x0c +#define CAFE_NAND_IRQ 0x10 +#define CAFE_NAND_IRQ_MASK 0x14 +#define CAFE_NAND_DATA_LEN 0x18 +#define CAFE_NAND_ADDR1 0x1c +#define CAFE_NAND_ADDR2 0x20 +#define CAFE_NAND_TIMING1 0x24 +#define CAFE_NAND_TIMING2 0x28 +#define CAFE_NAND_TIMING3 0x2c +#define CAFE_NAND_NONMEM 0x30 +#define CAFE_NAND_ECC_RESULT 0x3C +#define CAFE_NAND_DMA_CTRL 0x40 +#define CAFE_NAND_DMA_ADDR0 0x44 +#define CAFE_NAND_DMA_ADDR1 0x48 +#define CAFE_NAND_ECC_SYN01 0x50 +#define CAFE_NAND_ECC_SYN23 0x54 +#define CAFE_NAND_ECC_SYN45 0x58 +#define CAFE_NAND_ECC_SYN67 0x5c +#define CAFE_NAND_READ_DATA 0x1000 +#define CAFE_NAND_WRITE_DATA 0x2000 + +#define CAFE_GLOBAL_CTRL 0x3004 +#define CAFE_GLOBAL_IRQ 0x3008 +#define CAFE_GLOBAL_IRQ_MASK 0x300c +#define CAFE_NAND_RESET 0x3034 + +struct cafe_priv { + struct nand_chip nand; + struct pci_dev *pdev; + void __iomem *mmio; + struct rs_control *rs; + uint32_t ctl1; + uint32_t ctl2; + int datalen; + int nr_data; + int data_pos; + int page_addr; + dma_addr_t dmaaddr; + unsigned char *dmabuf; +}; + +static int usedma = 1; +module_param(usedma, int, 0644); + +static int skipbbt = 0; +module_param(skipbbt, int, 0644); + +static int debug = 0; +module_param(debug, int, 0644); + +static int regdebug = 0; +module_param(regdebug, int, 0644); + +static int checkecc = 1; +module_param(checkecc, int, 0644); + +static int numtimings; +static int timing[3]; +module_param_array(timing, int, &numtimings, 0644); + +/* Hrm. Why isn't this already conditional on something in the struct device? */ +#define cafe_dev_dbg(dev, args...) do { if (debug) dev_dbg(dev, ##args); } while(0) + +/* Make it easier to switch to PIO if we need to */ +#define cafe_readl(cafe, addr) readl((cafe)->mmio + CAFE_##addr) +#define cafe_writel(cafe, datum, addr) writel(datum, (cafe)->mmio + CAFE_##addr) + +static int cafe_device_ready(struct mtd_info *mtd) +{ + struct cafe_priv *cafe = mtd->priv; + int result = !!(cafe_readl(cafe, NAND_STATUS) | 0x40000000); + uint32_t irqs = cafe_readl(cafe, NAND_IRQ); + + cafe_writel(cafe, irqs, NAND_IRQ); + + cafe_dev_dbg(&cafe->pdev->dev, "NAND device is%s ready, IRQ %x (%x) (%x,%x)\n", + result?"":" not", irqs, cafe_readl(cafe, NAND_IRQ), + cafe_readl(cafe, GLOBAL_IRQ), cafe_readl(cafe, GLOBAL_IRQ_MASK)); + + return result; +} + + +static void cafe_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) +{ + struct cafe_priv *cafe = mtd->priv; + + if (usedma) + memcpy(cafe->dmabuf + cafe->datalen, buf, len); + else + memcpy_toio(cafe->mmio + CAFE_NAND_WRITE_DATA + cafe->datalen, buf, len); + + cafe->datalen += len; + + cafe_dev_dbg(&cafe->pdev->dev, "Copy 0x%x bytes to write buffer. datalen 0x%x\n", + len, cafe->datalen); +} + +static void cafe_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) +{ + struct cafe_priv *cafe = mtd->priv; + + if (usedma) + memcpy(buf, cafe->dmabuf + cafe->datalen, len); + else + memcpy_fromio(buf, cafe->mmio + CAFE_NAND_READ_DATA + cafe->datalen, len); + + cafe_dev_dbg(&cafe->pdev->dev, "Copy 0x%x bytes from position 0x%x in read buffer.\n", + len, cafe->datalen); + cafe->datalen += len; +} + +static uint8_t cafe_read_byte(struct mtd_info *mtd) +{ + struct cafe_priv *cafe = mtd->priv; + uint8_t d; + + cafe_read_buf(mtd, &d, 1); + cafe_dev_dbg(&cafe->pdev->dev, "Read %02x\n", d); + + return d; +} + +static void cafe_nand_cmdfunc(struct mtd_info *mtd, unsigned command, + int column, int page_addr) +{ + struct cafe_priv *cafe = mtd->priv; + int adrbytes = 0; + uint32_t ctl1; + uint32_t doneint = 0x80000000; + + cafe_dev_dbg(&cafe->pdev->dev, "cmdfunc %02x, 0x%x, 0x%x\n", + command, column, page_addr); + + if (command == NAND_CMD_ERASE2 || command == NAND_CMD_PAGEPROG) { + /* Second half of a command we already calculated */ + cafe_writel(cafe, cafe->ctl2 | 0x100 | command, NAND_CTRL2); + ctl1 = cafe->ctl1; + cafe->ctl2 &= ~(1<<30); + cafe_dev_dbg(&cafe->pdev->dev, "Continue command, ctl1 %08x, #data %d\n", + cafe->ctl1, cafe->nr_data); + goto do_command; + } + /* Reset ECC engine */ + cafe_writel(cafe, 0, NAND_CTRL2); + + /* Emulate NAND_CMD_READOOB on large-page chips */ + if (mtd->writesize > 512 && + command == NAND_CMD_READOOB) { + column += mtd->writesize; + command = NAND_CMD_READ0; + } + + /* FIXME: Do we need to send read command before sending data + for small-page chips, to position the buffer correctly? */ + + if (column != -1) { + cafe_writel(cafe, column, NAND_ADDR1); + adrbytes = 2; + if (page_addr != -1) + goto write_adr2; + } else if (page_addr != -1) { + cafe_writel(cafe, page_addr & 0xffff, NAND_ADDR1); + page_addr >>= 16; + write_adr2: + cafe_writel(cafe, page_addr, NAND_ADDR2); + adrbytes += 2; + if (mtd->size > mtd->writesize << 16) + adrbytes++; + } + + cafe->data_pos = cafe->datalen = 0; + + /* Set command valid bit */ + ctl1 = 0x80000000 | command; + + /* Set RD or WR bits as appropriate */ + if (command == NAND_CMD_READID || command == NAND_CMD_STATUS) { + ctl1 |= (1<<26); /* rd */ + /* Always 5 bytes, for now */ + cafe->datalen = 4; + /* And one address cycle -- even for STATUS, since the controller doesn't work without */ + adrbytes = 1; + } else if (command == NAND_CMD_READ0 || command == NAND_CMD_READ1 || + command == NAND_CMD_READOOB || command == NAND_CMD_RNDOUT) { + ctl1 |= 1<<26; /* rd */ + /* For now, assume just read to end of page */ + cafe->datalen = mtd->writesize + mtd->oobsize - column; + } else if (command == NAND_CMD_SEQIN) + ctl1 |= 1<<25; /* wr */ + + /* Set number of address bytes */ + if (adrbytes) + ctl1 |= ((adrbytes-1)|8) << 27; + + if (command == NAND_CMD_SEQIN || command == NAND_CMD_ERASE1) { + /* Ignore the first command of a pair; the hardware + deals with them both at once, later */ + cafe->ctl1 = ctl1; + cafe_dev_dbg(&cafe->pdev->dev, "Setup for delayed command, ctl1 %08x, dlen %x\n", + cafe->ctl1, cafe->datalen); + return; + } + /* RNDOUT and READ0 commands need a following byte */ + if (command == NAND_CMD_RNDOUT) + cafe_writel(cafe, cafe->ctl2 | 0x100 | NAND_CMD_RNDOUTSTART, NAND_CTRL2); + else if (command == NAND_CMD_READ0 && mtd->writesize > 512) + cafe_writel(cafe, cafe->ctl2 | 0x100 | NAND_CMD_READSTART, NAND_CTRL2); + + do_command: + cafe_dev_dbg(&cafe->pdev->dev, "dlen %x, ctl1 %x, ctl2 %x\n", + cafe->datalen, ctl1, cafe_readl(cafe, NAND_CTRL2)); + + /* NB: The datasheet lies -- we really should be subtracting 1 here */ + cafe_writel(cafe, cafe->datalen, NAND_DATA_LEN); + cafe_writel(cafe, 0x90000000, NAND_IRQ); + if (usedma && (ctl1 & (3<<25))) { + uint32_t dmactl = 0xc0000000 + cafe->datalen; + /* If WR or RD bits set, set up DMA */ + if (ctl1 & (1<<26)) { + /* It's a read */ + dmactl |= (1<<29); + /* ... so it's done when the DMA is done, not just + the command. */ + doneint = 0x10000000; + } + cafe_writel(cafe, dmactl, NAND_DMA_CTRL); + } + cafe->datalen = 0; + + if (unlikely(regdebug)) { + int i; + printk("About to write command %08x to register 0\n", ctl1); + for (i=4; i< 0x5c; i+=4) + printk("Register %x: %08x\n", i, readl(cafe->mmio + i)); + } + + cafe_writel(cafe, ctl1, NAND_CTRL1); + /* Apply this short delay always to ensure that we do wait tWB in + * any case on any machine. */ + ndelay(100); + + if (1) { + int c; + uint32_t irqs; + + for (c = 500000; c != 0; c--) { + irqs = cafe_readl(cafe, NAND_IRQ); + if (irqs & doneint) + break; + udelay(1); + if (!(c % 100000)) + cafe_dev_dbg(&cafe->pdev->dev, "Wait for ready, IRQ %x\n", irqs); + cpu_relax(); + } + cafe_writel(cafe, doneint, NAND_IRQ); + cafe_dev_dbg(&cafe->pdev->dev, "Command %x completed after %d usec, irqs %x (%x)\n", + command, 500000-c, irqs, cafe_readl(cafe, NAND_IRQ)); + } + + WARN_ON(cafe->ctl2 & (1<<30)); + + switch (command) { + + case NAND_CMD_CACHEDPROG: + case NAND_CMD_PAGEPROG: + case NAND_CMD_ERASE1: + case NAND_CMD_ERASE2: + case NAND_CMD_SEQIN: + case NAND_CMD_RNDIN: + case NAND_CMD_STATUS: + case NAND_CMD_DEPLETE1: + case NAND_CMD_RNDOUT: + case NAND_CMD_STATUS_ERROR: + case NAND_CMD_STATUS_ERROR0: + case NAND_CMD_STATUS_ERROR1: + case NAND_CMD_STATUS_ERROR2: + case NAND_CMD_STATUS_ERROR3: + cafe_writel(cafe, cafe->ctl2, NAND_CTRL2); + return; + } + nand_wait_ready(mtd); + cafe_writel(cafe, cafe->ctl2, NAND_CTRL2); +} + +static void cafe_select_chip(struct mtd_info *mtd, int chipnr) +{ + //struct cafe_priv *cafe = mtd->priv; + // cafe_dev_dbg(&cafe->pdev->dev, "select_chip %d\n", chipnr); +} + +static int cafe_nand_interrupt(int irq, void *id) +{ + struct mtd_info *mtd = id; + struct cafe_priv *cafe = mtd->priv; + uint32_t irqs = cafe_readl(cafe, NAND_IRQ); + cafe_writel(cafe, irqs & ~0x90000000, NAND_IRQ); + if (!irqs) + return IRQ_NONE; + + cafe_dev_dbg(&cafe->pdev->dev, "irq, bits %x (%x)\n", irqs, cafe_readl(cafe, NAND_IRQ)); + return IRQ_HANDLED; +} + +static void cafe_nand_bug(struct mtd_info *mtd) +{ + BUG(); +} + +static int cafe_nand_write_oob(struct mtd_info *mtd, + struct nand_chip *chip, int page) +{ + int status = 0; + + chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize, page); + chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); + chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); + status = chip->waitfunc(mtd, chip); + + return status & NAND_STATUS_FAIL ? -EIO : 0; +} + +/* Don't use -- use nand_read_oob_std for now */ +static int cafe_nand_read_oob(struct mtd_info *mtd, struct nand_chip *chip, + int page, int sndcmd) +{ + chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page); + chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); + return 1; +} +/** + * cafe_nand_read_page_syndrome - {REPLACABLE] hardware ecc syndrom based page read + * @mtd: mtd info structure + * @chip: nand chip info structure + * @buf: buffer to store read data + * + * The hw generator calculates the error syndrome automatically. Therefor + * we need a special oob layout and handling. + */ +static int cafe_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip, + uint8_t *buf) +{ + struct cafe_priv *cafe = mtd->priv; + + cafe_dev_dbg(&cafe->pdev->dev, "ECC result %08x SYN1,2 %08x\n", + cafe_readl(cafe, NAND_ECC_RESULT), + cafe_readl(cafe, NAND_ECC_SYN01)); + + chip->read_buf(mtd, buf, mtd->writesize); + chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); + + if (checkecc && cafe_readl(cafe, NAND_ECC_RESULT) & (1<<18)) { + unsigned short syn[8], pat[4]; + int pos[4]; + u8 *oob = chip->oob_poi; + int i, n; + + for (i=0; i<8; i+=2) { + uint32_t tmp = cafe_readl(cafe, NAND_ECC_SYN01 + (i*2)); + syn[i] = cafe->rs->index_of[tmp & 0xfff]; + syn[i+1] = cafe->rs->index_of[(tmp >> 16) & 0xfff]; + } + + n = decode_rs16(cafe->rs, NULL, NULL, 1367, syn, 0, pos, 0, + pat); + + for (i = 0; i < n; i++) { + int p = pos[i]; + + /* The 12-bit symbols are mapped to bytes here */ + + if (p > 1374) { + /* out of range */ + n = -1374; + } else if (p == 0) { + /* high four bits do not correspond to data */ + if (pat[i] > 0xff) + n = -2048; + else + buf[0] ^= pat[i]; + } else if (p == 1365) { + buf[2047] ^= pat[i] >> 4; + oob[0] ^= pat[i] << 4; + } else if (p > 1365) { + if ((p & 1) == 1) { + oob[3*p/2 - 2048] ^= pat[i] >> 4; + oob[3*p/2 - 2047] ^= pat[i] << 4; + } else { + oob[3*p/2 - 2049] ^= pat[i] >> 8; + oob[3*p/2 - 2048] ^= pat[i]; + } + } else if ((p & 1) == 1) { + buf[3*p/2] ^= pat[i] >> 4; + buf[3*p/2 + 1] ^= pat[i] << 4; + } else { + buf[3*p/2 - 1] ^= pat[i] >> 8; + buf[3*p/2] ^= pat[i]; + } + } + + if (n < 0) { + dev_dbg(&cafe->pdev->dev, "Failed to correct ECC at %08x\n", + cafe_readl(cafe, NAND_ADDR2) * 2048); + for (i = 0; i < 0x5c; i += 4) + printk("Register %x: %08x\n", i, readl(cafe->mmio + i)); + mtd->ecc_stats.failed++; + } else { + dev_dbg(&cafe->pdev->dev, "Corrected %d symbol errors\n", n); + mtd->ecc_stats.corrected += n; + } + } + + return 0; +} + +static struct nand_ecclayout cafe_oobinfo_2048 = { + .eccbytes = 14, + .eccpos = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13}, + .oobfree = {{14, 50}} +}; + +/* Ick. The BBT code really ought to be able to work this bit out + for itself from the above, at least for the 2KiB case */ +static uint8_t cafe_bbt_pattern_2048[] = { 'B', 'b', 't', '0' }; +static uint8_t cafe_mirror_pattern_2048[] = { '1', 't', 'b', 'B' }; + +static uint8_t cafe_bbt_pattern_512[] = { 0xBB }; +static uint8_t cafe_mirror_pattern_512[] = { 0xBC }; + + +static struct nand_bbt_descr cafe_bbt_main_descr_2048 = { + .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE + | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP, + .offs = 14, + .len = 4, + .veroffs = 18, + .maxblocks = 4, + .pattern = cafe_bbt_pattern_2048 +}; + +static struct nand_bbt_descr cafe_bbt_mirror_descr_2048 = { + .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE + | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP, + .offs = 14, + .len = 4, + .veroffs = 18, + .maxblocks = 4, + .pattern = cafe_mirror_pattern_2048 +}; + +static struct nand_ecclayout cafe_oobinfo_512 = { + .eccbytes = 14, + .eccpos = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13}, + .oobfree = {{14, 2}} +}; + +static struct nand_bbt_descr cafe_bbt_main_descr_512 = { + .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE + | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP, + .offs = 14, + .len = 1, + .veroffs = 15, + .maxblocks = 4, + .pattern = cafe_bbt_pattern_512 +}; + +static struct nand_bbt_descr cafe_bbt_mirror_descr_512 = { + .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE + | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP, + .offs = 14, + .len = 1, + .veroffs = 15, + .maxblocks = 4, + .pattern = cafe_mirror_pattern_512 +}; + + +static void cafe_nand_write_page_lowlevel(struct mtd_info *mtd, + struct nand_chip *chip, const uint8_t *buf) +{ + struct cafe_priv *cafe = mtd->priv; + + chip->write_buf(mtd, buf, mtd->writesize); + chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); + + /* Set up ECC autogeneration */ + cafe->ctl2 |= (1<<30); +} + +static int cafe_nand_write_page(struct mtd_info *mtd, struct nand_chip *chip, + const uint8_t *buf, int page, int cached, int raw) +{ + int status; + + chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page); + + if (unlikely(raw)) + chip->ecc.write_page_raw(mtd, chip, buf); + else + chip->ecc.write_page(mtd, chip, buf); + + /* + * Cached progamming disabled for now, Not sure if its worth the + * trouble. The speed gain is not very impressive. (2.3->2.6Mib/s) + */ + cached = 0; + + if (!cached || !(chip->options & NAND_CACHEPRG)) { + + chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); + status = chip->waitfunc(mtd, chip); + /* + * See if operation failed and additional status checks are + * available + */ + if ((status & NAND_STATUS_FAIL) && (chip->errstat)) + status = chip->errstat(mtd, chip, FL_WRITING, status, + page); + + if (status & NAND_STATUS_FAIL) + return -EIO; + } else { + chip->cmdfunc(mtd, NAND_CMD_CACHEDPROG, -1, -1); + status = chip->waitfunc(mtd, chip); + } + +#ifdef CONFIG_MTD_NAND_VERIFY_WRITE + /* Send command to read back the data */ + chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page); + + if (chip->verify_buf(mtd, buf, mtd->writesize)) + return -EIO; +#endif + return 0; +} + +static int cafe_nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip) +{ + return 0; +} + +/* F_2[X]/(X**6+X+1) */ +static unsigned short __devinit gf64_mul(u8 a, u8 b) +{ + u8 c; + unsigned int i; + + c = 0; + for (i = 0; i < 6; i++) { + if (a & 1) + c ^= b; + a >>= 1; + b <<= 1; + if ((b & 0x40) != 0) + b ^= 0x43; + } + + return c; +} + +/* F_64[X]/(X**2+X+A**-1) with A the generator of F_64[X] */ +static u16 __devinit gf4096_mul(u16 a, u16 b) +{ + u8 ah, al, bh, bl, ch, cl; + + ah = a >> 6; + al = a & 0x3f; + bh = b >> 6; + bl = b & 0x3f; + + ch = gf64_mul(ah ^ al, bh ^ bl) ^ gf64_mul(al, bl); + cl = gf64_mul(gf64_mul(ah, bh), 0x21) ^ gf64_mul(al, bl); + + return (ch << 6) ^ cl; +} + +static int __devinit cafe_mul(int x) +{ + if (x == 0) + return 1; + return gf4096_mul(x, 0xe01); +} + +static int __devinit cafe_nand_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct mtd_info *mtd; + struct cafe_priv *cafe; + uint32_t ctrl; + int err = 0; + + err = pci_enable_device(pdev); + if (err) + return err; + + pci_set_master(pdev); + + mtd = kzalloc(sizeof(*mtd) + sizeof(struct cafe_priv), GFP_KERNEL); + if (!mtd) { + dev_warn(&pdev->dev, "failed to alloc mtd_info\n"); + return -ENOMEM; + } + cafe = (void *)(&mtd[1]); + + mtd->priv = cafe; + mtd->owner = THIS_MODULE; + + cafe->pdev = pdev; + cafe->mmio = pci_iomap(pdev, 0, 0); + if (!cafe->mmio) { + dev_warn(&pdev->dev, "failed to iomap\n"); + err = -ENOMEM; + goto out_free_mtd; + } + cafe->dmabuf = dma_alloc_coherent(&cafe->pdev->dev, 2112 + sizeof(struct nand_buffers), + &cafe->dmaaddr, GFP_KERNEL); + if (!cafe->dmabuf) { + err = -ENOMEM; + goto out_ior; + } + cafe->nand.buffers = (void *)cafe->dmabuf + 2112; + + cafe->rs = init_rs_non_canonical(12, &cafe_mul, 0, 1, 8); + if (!cafe->rs) { + err = -ENOMEM; + goto out_ior; + } + + cafe->nand.cmdfunc = cafe_nand_cmdfunc; + cafe->nand.dev_ready = cafe_device_ready; + cafe->nand.read_byte = cafe_read_byte; + cafe->nand.read_buf = cafe_read_buf; + cafe->nand.write_buf = cafe_write_buf; + cafe->nand.select_chip = cafe_select_chip; + + cafe->nand.chip_delay = 0; + + /* Enable the following for a flash based bad block table */ + cafe->nand.options = NAND_USE_FLASH_BBT | NAND_NO_AUTOINCR | NAND_OWN_BUFFERS; + + if (skipbbt) { + cafe->nand.options |= NAND_SKIP_BBTSCAN; + cafe->nand.block_bad = cafe_nand_block_bad; + } + + if (numtimings && numtimings != 3) { + dev_warn(&cafe->pdev->dev, "%d timing register values ignored; precisely three are required\n", numtimings); + } + + if (numtimings == 3) { + cafe_dev_dbg(&cafe->pdev->dev, "Using provided timings (%08x %08x %08x)\n", + timing[0], timing[1], timing[2]); + } else { + timing[0] = cafe_readl(cafe, NAND_TIMING1); + timing[1] = cafe_readl(cafe, NAND_TIMING2); + timing[2] = cafe_readl(cafe, NAND_TIMING3); + + if (timing[0] | timing[1] | timing[2]) { + cafe_dev_dbg(&cafe->pdev->dev, "Timing registers already set (%08x %08x %08x)\n", + timing[0], timing[1], timing[2]); + } else { + dev_warn(&cafe->pdev->dev, "Timing registers unset; using most conservative defaults\n"); + timing[0] = timing[1] = timing[2] = 0xffffffff; + } + } + + /* Start off by resetting the NAND controller completely */ + cafe_writel(cafe, 1, NAND_RESET); + cafe_writel(cafe, 0, NAND_RESET); + + cafe_writel(cafe, timing[0], NAND_TIMING1); + cafe_writel(cafe, timing[1], NAND_TIMING2); + cafe_writel(cafe, timing[2], NAND_TIMING3); + + cafe_writel(cafe, 0xffffffff, NAND_IRQ_MASK); + err = request_irq(pdev->irq, &cafe_nand_interrupt, IRQF_SHARED, + "CAFE NAND", mtd); + if (err) { + dev_warn(&pdev->dev, "Could not register IRQ %d\n", pdev->irq); + goto out_free_dma; + } + + /* Disable master reset, enable NAND clock */ + ctrl = cafe_readl(cafe, GLOBAL_CTRL); + ctrl &= 0xffffeff0; + ctrl |= 0x00007000; + cafe_writel(cafe, ctrl | 0x05, GLOBAL_CTRL); + cafe_writel(cafe, ctrl | 0x0a, GLOBAL_CTRL); + cafe_writel(cafe, 0, NAND_DMA_CTRL); + + cafe_writel(cafe, 0x7006, GLOBAL_CTRL); + cafe_writel(cafe, 0x700a, GLOBAL_CTRL); + + /* Set up DMA address */ + cafe_writel(cafe, cafe->dmaaddr & 0xffffffff, NAND_DMA_ADDR0); + if (sizeof(cafe->dmaaddr) > 4) + /* Shift in two parts to shut the compiler up */ + cafe_writel(cafe, (cafe->dmaaddr >> 16) >> 16, NAND_DMA_ADDR1); + else + cafe_writel(cafe, 0, NAND_DMA_ADDR1); + + cafe_dev_dbg(&cafe->pdev->dev, "Set DMA address to %x (virt %p)\n", + cafe_readl(cafe, NAND_DMA_ADDR0), cafe->dmabuf); + + /* Enable NAND IRQ in global IRQ mask register */ + cafe_writel(cafe, 0x80000007, GLOBAL_IRQ_MASK); + cafe_dev_dbg(&cafe->pdev->dev, "Control %x, IRQ mask %x\n", + cafe_readl(cafe, GLOBAL_CTRL), cafe_readl(cafe, GLOBAL_IRQ_MASK)); + + /* Scan to find existence of the device */ + if (nand_scan_ident(mtd, 1)) { + err = -ENXIO; + goto out_irq; + } + + cafe->ctl2 = 1<<27; /* Reed-Solomon ECC */ + if (mtd->writesize == 2048) + cafe->ctl2 |= 1<<29; /* 2KiB page size */ + + /* Set up ECC according to the type of chip we found */ + if (mtd->writesize == 2048) { + cafe->nand.ecc.layout = &cafe_oobinfo_2048; + cafe->nand.bbt_td = &cafe_bbt_main_descr_2048; + cafe->nand.bbt_md = &cafe_bbt_mirror_descr_2048; + } else if (mtd->writesize == 512) { + cafe->nand.ecc.layout = &cafe_oobinfo_512; + cafe->nand.bbt_td = &cafe_bbt_main_descr_512; + cafe->nand.bbt_md = &cafe_bbt_mirror_descr_512; + } else { + printk(KERN_WARNING "Unexpected NAND flash writesize %d. Aborting\n", + mtd->writesize); + goto out_irq; + } + cafe->nand.ecc.mode = NAND_ECC_HW_SYNDROME; + cafe->nand.ecc.size = mtd->writesize; + cafe->nand.ecc.bytes = 14; + cafe->nand.ecc.hwctl = (void *)cafe_nand_bug; + cafe->nand.ecc.calculate = (void *)cafe_nand_bug; + cafe->nand.ecc.correct = (void *)cafe_nand_bug; + cafe->nand.write_page = cafe_nand_write_page; + cafe->nand.ecc.write_page = cafe_nand_write_page_lowlevel; + cafe->nand.ecc.write_oob = cafe_nand_write_oob; + cafe->nand.ecc.read_page = cafe_nand_read_page; + cafe->nand.ecc.read_oob = cafe_nand_read_oob; + + err = nand_scan_tail(mtd); + if (err) + goto out_irq; + + pci_set_drvdata(pdev, mtd); + add_mtd_device(mtd); + goto out; + + out_irq: + /* Disable NAND IRQ in global IRQ mask register */ + cafe_writel(cafe, ~1 & cafe_readl(cafe, GLOBAL_IRQ_MASK), GLOBAL_IRQ_MASK); + free_irq(pdev->irq, mtd); + out_free_dma: + dma_free_coherent(&cafe->pdev->dev, 2112, cafe->dmabuf, cafe->dmaaddr); + out_ior: + pci_iounmap(pdev, cafe->mmio); + out_free_mtd: + kfree(mtd); + out: + return err; +} + +static void __devexit cafe_nand_remove(struct pci_dev *pdev) +{ + struct mtd_info *mtd = pci_get_drvdata(pdev); + struct cafe_priv *cafe = mtd->priv; + + del_mtd_device(mtd); + /* Disable NAND IRQ in global IRQ mask register */ + cafe_writel(cafe, ~1 & cafe_readl(cafe, GLOBAL_IRQ_MASK), GLOBAL_IRQ_MASK); + free_irq(pdev->irq, mtd); + nand_release(mtd); + free_rs(cafe->rs); + pci_iounmap(pdev, cafe->mmio); + dma_free_coherent(&cafe->pdev->dev, 2112, cafe->dmabuf, cafe->dmaaddr); + kfree(mtd); +} + +static struct pci_device_id cafe_nand_tbl[] = { + { 0x11ab, 0x4100, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_MEMORY_FLASH << 8, 0xFFFF0 } +}; + +MODULE_DEVICE_TABLE(pci, cafe_nand_tbl); + +static struct pci_driver cafe_nand_pci_driver = { + .name = "CAFÉ NAND", + .id_table = cafe_nand_tbl, + .probe = cafe_nand_probe, + .remove = __devexit_p(cafe_nand_remove), +#ifdef CONFIG_PMx + .suspend = cafe_nand_suspend, + .resume = cafe_nand_resume, +#endif +}; + +static int cafe_nand_init(void) +{ + return pci_register_driver(&cafe_nand_pci_driver); +} + +static void cafe_nand_exit(void) +{ + pci_unregister_driver(&cafe_nand_pci_driver); +} +module_init(cafe_nand_init); +module_exit(cafe_nand_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("David Woodhouse "); +MODULE_DESCRIPTION("NAND flash driver for OLPC CAFÉ chip"); -- cgit v1.2.2