From ae628903ab6cc9a04fdf8d4ff3f0c5b2ffa6f939 Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Sun, 3 May 2009 20:45:03 +0200 Subject: sdhci: avoid changing voltage needlessly Because of granularity issues, sometimes we told the hardware to change to the voltage we were already at. Rework the logic so this doesn't happen. Signed-off-by: Pierre Ossman --- drivers/mmc/host/sdhci.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/mmc/host/sdhci.h') diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 65c6f996bbd3..2de08349c3ca 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -255,7 +255,7 @@ struct sdhci_host { unsigned int timeout_clk; /* Timeout freq (KHz) */ unsigned int clock; /* Current clock (MHz) */ - unsigned short power; /* Current voltage */ + u8 pwr; /* Current voltage */ struct mmc_request *mrq; /* Current request */ struct mmc_command *cmd; /* Current command */ -- cgit v1.2.2 From 1388eefd5a5e6aaa3cb04070bfc2b944c1d24b82 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sun, 14 Jun 2009 12:40:53 +0100 Subject: sdhci: Add SDHCI_QUIRK_NO_MULTIBLOCK quirk Add quirk to show the controller cannot do multi-block IO. This is mainly for the Samsung SDHCI controller that currently cannot manage to do multi-block PIO without timing out. Signed-off-by: Ben Dooks Signed-off-by: Pierre Ossman --- drivers/mmc/host/sdhci.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/mmc/host/sdhci.h') diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 2de08349c3ca..84d149096f0e 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -226,6 +226,8 @@ struct sdhci_host { #define SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET (1<<19) /* Controller has to be forced to use block size of 2048 bytes */ #define SDHCI_QUIRK_FORCE_BLK_SZ_2048 (1<<20) +/* Controller cannot do multi-block transfers */ +#define SDHCI_QUIRK_NO_MULTIBLOCK (1<<21) int irq; /* Device IRQ */ void __iomem * ioaddr; /* Mapped address */ -- cgit v1.2.2 From 5fe23c7f51def59f66bc6aeee988ef1a467a2c8c Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 18 Jun 2009 00:14:08 +0400 Subject: sdhci: Add support for hosts that are only capable of 1-bit transfers Some hosts (hardware configurations, or particular SD/MMC slots) may not support 4-bit bus. For example, on MPC8569E-MDS boards we can switch between serial (1-bit only) and nibble (4-bit) modes, thought we have to disable more peripherals to work in 4-bit mode. Along with some small core changes, this patch modifies sdhci-of driver, so that now it looks for "sdhci,1-bit-only" property in the device-tree, and if specified we enable a proper quirk. Signed-off-by: Anton Vorontsov Acked-by: Grant Likely Signed-off-by: Pierre Ossman --- drivers/mmc/host/sdhci.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/mmc/host/sdhci.h') diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 84d149096f0e..5d37dd94b53f 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -228,6 +228,8 @@ struct sdhci_host { #define SDHCI_QUIRK_FORCE_BLK_SZ_2048 (1<<20) /* Controller cannot do multi-block transfers */ #define SDHCI_QUIRK_NO_MULTIBLOCK (1<<21) +/* Controller can only handle 1-bit data transfers */ +#define SDHCI_QUIRK_FORCE_1_BIT_DATA (1<<22) int irq; /* Device IRQ */ void __iomem * ioaddr; /* Mapped address */ -- cgit v1.2.2 From 557b06971b1f05cbadec2f376a305ee1954e9b0d Mon Sep 17 00:00:00 2001 From: Harald Welte Date: Thu, 18 Jun 2009 16:53:38 +0200 Subject: sdhci: Specific quirk vor VIA SDHCI controller in VX855ES The SDHCI controller found in the VX855ES requires 10ms delay between applying power and applying clock. This issue has been discovered and documented by the OLPC XO1.5 team. Signed-off-by: Harald Welte Signed-off-by: Pierre Ossman --- drivers/mmc/host/sdhci.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/mmc/host/sdhci.h') diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 5d37dd94b53f..831ddf7dcb49 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -230,6 +230,8 @@ struct sdhci_host { #define SDHCI_QUIRK_NO_MULTIBLOCK (1<<21) /* Controller can only handle 1-bit data transfers */ #define SDHCI_QUIRK_FORCE_1_BIT_DATA (1<<22) +/* Controller needs 10ms delay between applying power and clock */ +#define SDHCI_QUIRK_DELAY_AFTER_POWER (1<<23) int irq; /* Device IRQ */ void __iomem * ioaddr; /* Mapped address */ -- cgit v1.2.2