From 80d3ac77a84987d5132726f3d7cef342a280f7d9 Mon Sep 17 00:00:00 2001 From: Michael Reed Date: Wed, 24 May 2006 15:07:09 -0500 Subject: [SCSI] mptfusion: move fc event/reset handling to mptfc Move fibre channel event and reset handling to mptfc. This will result in fewer changes over time that need to be applied to either mptbase.c or mptscsih.c. Signed-off-by: Michael Reed Signed-off-by: James Bottomley --- drivers/message/fusion/mptbase.c | 112 ----------------------- drivers/message/fusion/mptbase.h | 1 - drivers/message/fusion/mptfc.c | 187 +++++++++++++++++++++++++++++++++++++- drivers/message/fusion/mptscsih.c | 21 ----- 4 files changed, 184 insertions(+), 137 deletions(-) (limited to 'drivers/message') diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c index 164375eea896..330c29080e3c 100644 --- a/drivers/message/fusion/mptbase.c +++ b/drivers/message/fusion/mptbase.c @@ -1188,7 +1188,6 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id) ioc->pcidev = pdev; ioc->diagPending = 0; spin_lock_init(&ioc->diagLock); - spin_lock_init(&ioc->fc_rescan_work_lock); spin_lock_init(&ioc->initializing_hba_lock); /* Initialize the event logging. @@ -1847,14 +1846,6 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag) mpt_findImVolumes(ioc); } else if (ioc->bus_type == FC) { - /* - * Pre-fetch FC port WWN and stuff... - * (FCPortPage0_t stuff) - */ - for (ii=0; ii < ioc->facts.NumberOfPorts; ii++) { - (void) mptbase_GetFcPortPage0(ioc, ii); - } - if ((ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) && (ioc->lan_cnfg_page0.Header.PageLength == 0)) { /* @@ -4184,108 +4175,6 @@ GetLanConfigPages(MPT_ADAPTER *ioc) return rc; } -/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* - * mptbase_GetFcPortPage0 - Fetch FCPort config Page0. - * @ioc: Pointer to MPT_ADAPTER structure - * @portnum: IOC Port number - * - * Return: 0 for success - * -ENOMEM if no memory available - * -EPERM if not allowed due to ISR context - * -EAGAIN if no msg frames currently available - * -EFAULT for non-successful reply or no reply (timeout) - */ -int -mptbase_GetFcPortPage0(MPT_ADAPTER *ioc, int portnum) -{ - ConfigPageHeader_t hdr; - CONFIGPARMS cfg; - FCPortPage0_t *ppage0_alloc; - FCPortPage0_t *pp0dest; - dma_addr_t page0_dma; - int data_sz; - int copy_sz; - int rc; - int count = 400; - - - /* Get FCPort Page 0 header */ - hdr.PageVersion = 0; - hdr.PageLength = 0; - hdr.PageNumber = 0; - hdr.PageType = MPI_CONFIG_PAGETYPE_FC_PORT; - cfg.cfghdr.hdr = &hdr; - cfg.physAddr = -1; - cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; - cfg.dir = 0; - cfg.pageAddr = portnum; - cfg.timeout = 0; - - if ((rc = mpt_config(ioc, &cfg)) != 0) - return rc; - - if (hdr.PageLength == 0) - return 0; - - data_sz = hdr.PageLength * 4; - rc = -ENOMEM; - ppage0_alloc = (FCPortPage0_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page0_dma); - if (ppage0_alloc) { - - try_again: - memset((u8 *)ppage0_alloc, 0, data_sz); - cfg.physAddr = page0_dma; - cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; - - if ((rc = mpt_config(ioc, &cfg)) == 0) { - /* save the data */ - pp0dest = &ioc->fc_port_page0[portnum]; - copy_sz = min_t(int, sizeof(FCPortPage0_t), data_sz); - memcpy(pp0dest, ppage0_alloc, copy_sz); - - /* - * Normalize endianness of structure data, - * by byte-swapping all > 1 byte fields! - */ - pp0dest->Flags = le32_to_cpu(pp0dest->Flags); - pp0dest->PortIdentifier = le32_to_cpu(pp0dest->PortIdentifier); - pp0dest->WWNN.Low = le32_to_cpu(pp0dest->WWNN.Low); - pp0dest->WWNN.High = le32_to_cpu(pp0dest->WWNN.High); - pp0dest->WWPN.Low = le32_to_cpu(pp0dest->WWPN.Low); - pp0dest->WWPN.High = le32_to_cpu(pp0dest->WWPN.High); - pp0dest->SupportedServiceClass = le32_to_cpu(pp0dest->SupportedServiceClass); - pp0dest->SupportedSpeeds = le32_to_cpu(pp0dest->SupportedSpeeds); - pp0dest->CurrentSpeed = le32_to_cpu(pp0dest->CurrentSpeed); - pp0dest->MaxFrameSize = le32_to_cpu(pp0dest->MaxFrameSize); - pp0dest->FabricWWNN.Low = le32_to_cpu(pp0dest->FabricWWNN.Low); - pp0dest->FabricWWNN.High = le32_to_cpu(pp0dest->FabricWWNN.High); - pp0dest->FabricWWPN.Low = le32_to_cpu(pp0dest->FabricWWPN.Low); - pp0dest->FabricWWPN.High = le32_to_cpu(pp0dest->FabricWWPN.High); - pp0dest->DiscoveredPortsCount = le32_to_cpu(pp0dest->DiscoveredPortsCount); - pp0dest->MaxInitiators = le32_to_cpu(pp0dest->MaxInitiators); - - /* - * if still doing discovery, - * hang loose a while until finished - */ - if (pp0dest->PortState == MPI_FCPORTPAGE0_PORTSTATE_UNKNOWN) { - if (count-- > 0) { - msleep_interruptible(100); - goto try_again; - } - printk(MYIOC_s_INFO_FMT "Firmware discovery not" - " complete.\n", - ioc->name); - } - } - - pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage0_alloc, page0_dma); - } - - return rc; -} - /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /* * mptbase_sas_persist_operation - Perform operation on SAS Persitent Table @@ -6495,7 +6384,6 @@ EXPORT_SYMBOL(mpt_findImVolumes); EXPORT_SYMBOL(mpt_alloc_fw_memory); EXPORT_SYMBOL(mpt_free_fw_memory); EXPORT_SYMBOL(mptbase_sas_persist_operation); -EXPORT_SYMBOL(mptbase_GetFcPortPage0); /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h index f673cca507e1..693c95c9034a 100644 --- a/drivers/message/fusion/mptbase.h +++ b/drivers/message/fusion/mptbase.h @@ -1027,7 +1027,6 @@ extern void mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size); extern void mpt_free_fw_memory(MPT_ADAPTER *ioc); extern int mpt_findImVolumes(MPT_ADAPTER *ioc); extern int mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode); -extern int mptbase_GetFcPortPage0(MPT_ADAPTER *ioc, int portnum); /* * Public data decl's... diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c index 856487741ef4..e518bc97f8ce 100644 --- a/drivers/message/fusion/mptfc.c +++ b/drivers/message/fusion/mptfc.c @@ -596,6 +596,110 @@ mptfc_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) return err; } +/* + * mptfc_GetFcPortPage0 - Fetch FCPort config Page0. + * @ioc: Pointer to MPT_ADAPTER structure + * @portnum: IOC Port number + * + * Return: 0 for success + * -ENOMEM if no memory available + * -EPERM if not allowed due to ISR context + * -EAGAIN if no msg frames currently available + * -EFAULT for non-successful reply or no reply (timeout) + * -EINVAL portnum arg out of range (hardwired to two elements) + */ +static int +mptfc_GetFcPortPage0(MPT_ADAPTER *ioc, int portnum) +{ + ConfigPageHeader_t hdr; + CONFIGPARMS cfg; + FCPortPage0_t *ppage0_alloc; + FCPortPage0_t *pp0dest; + dma_addr_t page0_dma; + int data_sz; + int copy_sz; + int rc; + int count = 400; + + if (portnum > 1) + return -EINVAL; + + /* Get FCPort Page 0 header */ + hdr.PageVersion = 0; + hdr.PageLength = 0; + hdr.PageNumber = 0; + hdr.PageType = MPI_CONFIG_PAGETYPE_FC_PORT; + cfg.cfghdr.hdr = &hdr; + cfg.physAddr = -1; + cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; + cfg.dir = 0; + cfg.pageAddr = portnum; + cfg.timeout = 0; + + if ((rc = mpt_config(ioc, &cfg)) != 0) + return rc; + + if (hdr.PageLength == 0) + return 0; + + data_sz = hdr.PageLength * 4; + rc = -ENOMEM; + ppage0_alloc = (FCPortPage0_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page0_dma); + if (ppage0_alloc) { + + try_again: + memset((u8 *)ppage0_alloc, 0, data_sz); + cfg.physAddr = page0_dma; + cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; + + if ((rc = mpt_config(ioc, &cfg)) == 0) { + /* save the data */ + pp0dest = &ioc->fc_port_page0[portnum]; + copy_sz = min_t(int, sizeof(FCPortPage0_t), data_sz); + memcpy(pp0dest, ppage0_alloc, copy_sz); + + /* + * Normalize endianness of structure data, + * by byte-swapping all > 1 byte fields! + */ + pp0dest->Flags = le32_to_cpu(pp0dest->Flags); + pp0dest->PortIdentifier = le32_to_cpu(pp0dest->PortIdentifier); + pp0dest->WWNN.Low = le32_to_cpu(pp0dest->WWNN.Low); + pp0dest->WWNN.High = le32_to_cpu(pp0dest->WWNN.High); + pp0dest->WWPN.Low = le32_to_cpu(pp0dest->WWPN.Low); + pp0dest->WWPN.High = le32_to_cpu(pp0dest->WWPN.High); + pp0dest->SupportedServiceClass = le32_to_cpu(pp0dest->SupportedServiceClass); + pp0dest->SupportedSpeeds = le32_to_cpu(pp0dest->SupportedSpeeds); + pp0dest->CurrentSpeed = le32_to_cpu(pp0dest->CurrentSpeed); + pp0dest->MaxFrameSize = le32_to_cpu(pp0dest->MaxFrameSize); + pp0dest->FabricWWNN.Low = le32_to_cpu(pp0dest->FabricWWNN.Low); + pp0dest->FabricWWNN.High = le32_to_cpu(pp0dest->FabricWWNN.High); + pp0dest->FabricWWPN.Low = le32_to_cpu(pp0dest->FabricWWPN.Low); + pp0dest->FabricWWPN.High = le32_to_cpu(pp0dest->FabricWWPN.High); + pp0dest->DiscoveredPortsCount = le32_to_cpu(pp0dest->DiscoveredPortsCount); + pp0dest->MaxInitiators = le32_to_cpu(pp0dest->MaxInitiators); + + /* + * if still doing discovery, + * hang loose a while until finished + */ + if (pp0dest->PortState == MPI_FCPORTPAGE0_PORTSTATE_UNKNOWN) { + if (count-- > 0) { + msleep_interruptible(100); + goto try_again; + } + printk(MYIOC_s_INFO_FMT "Firmware discovery not" + " complete.\n", + ioc->name); + } + } + + pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage0_alloc, page0_dma); + } + + return rc; +} + static void mptfc_init_host_attr(MPT_ADAPTER *ioc,int portnum) { @@ -651,7 +755,7 @@ mptfc_rescan_devices(void *arg) * will reregister existing rports */ for (ii=0; ii < ioc->facts.NumberOfPorts; ii++) { - (void) mptbase_GetFcPortPage0(ioc, ii); + (void) mptfc_GetFcPortPage0(ioc, ii); mptfc_init_host_attr(ioc,ii); /* refresh */ mptfc_GetFcDevPage0(ioc,ii,mptfc_register_dev); } @@ -753,6 +857,7 @@ mptfc_probe(struct pci_dev *pdev, const struct pci_device_id *id) goto out_mptfc_probe; } + spin_lock_init(&ioc->fc_rescan_work_lock); INIT_WORK(&ioc->fc_rescan_work, mptfc_rescan_devices,(void *)ioc); spin_lock_irqsave(&ioc->FreeQlock, flags); @@ -888,6 +993,14 @@ mptfc_probe(struct pci_dev *pdev, const struct pci_device_id *id) if (!ioc->fc_rescan_work_q) goto out_mptfc_probe; + /* + * Pre-fetch FC port WWN and stuff... + * (FCPortPage0_t stuff) + */ + for (ii=0; ii < ioc->facts.NumberOfPorts; ii++) { + (void) mptfc_GetFcPortPage0(ioc, ii); + } + /* * scan for rports - * by doing it via the workqueue, some locking is eliminated @@ -917,6 +1030,74 @@ static struct pci_driver mptfc_driver = { #endif }; +static int +mptfc_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply) +{ + MPT_SCSI_HOST *hd; + u8 event = le32_to_cpu(pEvReply->Event) & 0xFF; + unsigned long flags; + int rc=1; + + devtverboseprintk((MYIOC_s_INFO_FMT "MPT event (=%02Xh) routed to SCSI host driver!\n", + ioc->name, event)); + + if (ioc->sh == NULL || + ((hd = (MPT_SCSI_HOST *)ioc->sh->hostdata) == NULL)) + return 1; + + switch (event) { + case MPI_EVENT_RESCAN: + spin_lock_irqsave(&ioc->fc_rescan_work_lock, flags); + if (ioc->fc_rescan_work_q) { + if (ioc->fc_rescan_work_count++ == 0) { + queue_work(ioc->fc_rescan_work_q, + &ioc->fc_rescan_work); + } + } + spin_unlock_irqrestore(&ioc->fc_rescan_work_lock, flags); + break; + default: + rc = mptscsih_event_process(ioc,pEvReply); + break; + } + return rc; +} + +static int +mptfc_ioc_reset(MPT_ADAPTER *ioc, int reset_phase) +{ + int rc; + unsigned long flags; + + rc = mptscsih_ioc_reset(ioc,reset_phase); + if (rc == 0) + return rc; + + + dtmprintk((KERN_WARNING MYNAM + ": IOC %s_reset routed to FC host driver!\n", + reset_phase==MPT_IOC_SETUP_RESET ? "setup" : ( + reset_phase==MPT_IOC_PRE_RESET ? "pre" : "post"))); + + if (reset_phase == MPT_IOC_SETUP_RESET) { + } + + else if (reset_phase == MPT_IOC_PRE_RESET) { + } + + else { /* MPT_IOC_POST_RESET */ + spin_lock_irqsave(&ioc->fc_rescan_work_lock, flags); + if (ioc->fc_rescan_work_q) { + if (ioc->fc_rescan_work_count++ == 0) { + queue_work(ioc->fc_rescan_work_q, + &ioc->fc_rescan_work); + } + } + spin_unlock_irqrestore(&ioc->fc_rescan_work_lock, flags); + } + return 1; +} + /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /** * mptfc_init - Register MPT adapter(s) as SCSI host(s) with @@ -945,12 +1126,12 @@ mptfc_init(void) mptfcTaskCtx = mpt_register(mptscsih_taskmgmt_complete, MPTFC_DRIVER); mptfcInternalCtx = mpt_register(mptscsih_scandv_complete, MPTFC_DRIVER); - if (mpt_event_register(mptfcDoneCtx, mptscsih_event_process) == 0) { + if (mpt_event_register(mptfcDoneCtx, mptfc_event_process) == 0) { devtverboseprintk((KERN_INFO MYNAM ": Registered for IOC event notifications\n")); } - if (mpt_reset_register(mptfcDoneCtx, mptscsih_ioc_reset) == 0) { + if (mpt_reset_register(mptfcDoneCtx, mptfc_ioc_reset) == 0) { dprintk((KERN_INFO MYNAM ": Registered for IOC reset notifications\n")); } diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c index 84fa271eb8f4..2d81831cf628 100644 --- a/drivers/message/fusion/mptscsih.c +++ b/drivers/message/fusion/mptscsih.c @@ -2521,18 +2521,6 @@ mptscsih_ioc_reset(MPT_ADAPTER *ioc, int reset_phase) hd->cmdPtr = NULL; } - /* 7. FC: Rescan for blocked rports which might have returned. - */ - if (ioc->bus_type == FC) { - spin_lock_irqsave(&ioc->fc_rescan_work_lock, flags); - if (ioc->fc_rescan_work_q) { - if (ioc->fc_rescan_work_count++ == 0) { - queue_work(ioc->fc_rescan_work_q, - &ioc->fc_rescan_work); - } - } - spin_unlock_irqrestore(&ioc->fc_rescan_work_lock, flags); - } dtmprintk((MYIOC_s_WARN_FMT "Post-Reset complete.\n", ioc->name)); } @@ -2546,7 +2534,6 @@ mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply) { MPT_SCSI_HOST *hd; u8 event = le32_to_cpu(pEvReply->Event) & 0xFF; - unsigned long flags; devtverboseprintk((MYIOC_s_INFO_FMT "MPT event (=%02Xh) routed to SCSI host driver!\n", ioc->name, event)); @@ -2569,14 +2556,6 @@ mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply) break; case MPI_EVENT_RESCAN: /* 06 */ - spin_lock_irqsave(&ioc->fc_rescan_work_lock, flags); - if (ioc->fc_rescan_work_q) { - if (ioc->fc_rescan_work_count++ == 0) { - queue_work(ioc->fc_rescan_work_q, - &ioc->fc_rescan_work); - } - } - spin_unlock_irqrestore(&ioc->fc_rescan_work_lock, flags); break; /* -- cgit v1.2.2