From 5c1b91b9923d1b3d33576e391ff7b587bdff7a3e Mon Sep 17 00:00:00 2001 From: "Prakash, Sathya" Date: Tue, 24 Jul 2007 15:40:08 +0530 Subject: [SCSI] mpt fusion: logging support in Kconfig, Makefile, mptbase.h and addition of mptdebug.h This patch adds a new file mptdebug.h in the fusion source directory, which contains different debug macros. The existing debug macros and flags are removed from the mptbase.h and Makefile In Kconfig a new configuration parameter FUSION_LOGGING is added to enable/disable the logging support during compile time. signed-off-by: Sathya Prakash Signed-off-by: James Bottomley --- drivers/message/fusion/mptdebug.h | 288 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 288 insertions(+) create mode 100644 drivers/message/fusion/mptdebug.h (limited to 'drivers/message/fusion/mptdebug.h') diff --git a/drivers/message/fusion/mptdebug.h b/drivers/message/fusion/mptdebug.h new file mode 100644 index 000000000000..ffdb0a6191b4 --- /dev/null +++ b/drivers/message/fusion/mptdebug.h @@ -0,0 +1,288 @@ +/* + * linux/drivers/message/fusion/mptdebug.h + * For use with LSI PCI chip/adapter(s) + * running LSI Fusion MPT (Message Passing Technology) firmware. + * + * Copyright (c) 1999-2007 LSI Corporation + * (mailto:DL-MPTFusionLinux@lsi.com) + * + */ +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ + +#ifndef MPTDEBUG_H_INCLUDED +#define MPTDEBUG_H_INCLUDED + +/* + * debug level can be programmed on the fly via SysFS (hex values) + * + * Example: (programming for MPT_DEBUG_EVENTS on host 5) + * + * echo 8 > /sys/class/scsi_host/host5/debug_level + * + * -------------------------------------------------------- + * mpt_debug_level - command line parameter + * this allow enabling debug at driver load time (for all iocs) + * + * Example (programming for MPT_DEBUG_EVENTS) + * + * insmod mptbase.ko mpt_debug_level=8 + * + * -------------------------------------------------------- + * CONFIG_FUSION_LOGGING - enables compiling debug into driver + * this can be enabled in the driver Makefile + * + * + * -------------------------------------------------------- + * Please note most debug prints are set to logging priority = debug + * This is the lowest level, and most verbose. Please refer to manual + * pages for syslogd or syslogd-ng on how to configure this. + */ + +#define MPT_DEBUG 0x00000001 +#define MPT_DEBUG_MSG_FRAME 0x00000002 +#define MPT_DEBUG_SG 0x00000004 +#define MPT_DEBUG_EVENTS 0x00000008 +#define MPT_DEBUG_VERBOSE_EVENTS 0x00000010 +#define MPT_DEBUG_INIT 0x00000020 +#define MPT_DEBUG_EXIT 0x00000040 +#define MPT_DEBUG_FAIL 0x00000080 +#define MPT_DEBUG_TM 0x00000100 +#define MPT_DEBUG_DV 0x00000200 +#define MPT_DEBUG_REPLY 0x00000400 +#define MPT_DEBUG_HANDSHAKE 0x00000800 +#define MPT_DEBUG_CONFIG 0x00001000 +#define MPT_DEBUG_DL 0x00002000 +#define MPT_DEBUG_RESET 0x00008000 +#define MPT_DEBUG_SCSI 0x00010000 +#define MPT_DEBUG_IOCTL 0x00020000 +#define MPT_DEBUG_FC 0x00080000 +#define MPT_DEBUG_SAS 0x00100000 +#define MPT_DEBUG_SAS_WIDE 0x00200000 + +/* + * CONFIG_FUSION_LOGGING - enabled in Kconfig + */ + +#ifdef CONFIG_FUSION_LOGGING +#define MPT_CHECK_LOGGING(IOC, CMD, BITS) \ +{ \ + if (IOC->debug_level & BITS) \ + CMD; \ +} +#else +#define MPT_CHECK_LOGGING(IOC, CMD, BITS) +#endif + + +/* + * debug macros + */ + +#define dprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG) + +#define dsgprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_SG) + +#define devtprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_EVENTS) + +#define devtverboseprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_VERBOSE_EVENTS) + +#define dinitprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_INIT) + +#define dexitprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_EXIT) + +#define dfailprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_FAIL) + +#define dtmprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_TM) + +#define ddvprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_DV) + +#define dreplyprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_REPLY) + +#define dhsprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_HANDSHAKE) + +#define dcprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_CONFIG) + +#define ddlprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_DL) + +#define drsprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_RESET) + +#define dsprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_SCSI) + +#define dctlprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_IOCTL) + +#define dfcprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_FC) + +#define dsasprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_SAS) + +#define dsaswideprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_SAS_WIDE) + + + +/* + * Verbose logging + */ +#if defined(MPT_DEBUG_VERBOSE) && defined(CONFIG_FUSION_LOGGING) +static inline void +DBG_DUMP_FW_DOWNLOAD(MPT_ADAPTER *ioc, u32 *mfp, int numfrags) +{ + int i; + + if (!(ioc->debug_level & MPT_DEBUG)) + return; + printk(KERN_DEBUG "F/W download request:\n"); + for (i=0; i < 7+numfrags*2; i++) + printk(" %08x", le32_to_cpu(mfp[i])); + printk("\n"); +} + +static inline void +DBG_DUMP_PUT_MSG_FRAME(MPT_ADAPTER *ioc, u32 *mfp) +{ + int ii, n; + + if (!(ioc->debug_level & MPT_DEBUG_MSG_FRAME)) + return; + printk(KERN_DEBUG "%s: About to Put msg frame @ %p:\n", + ioc->name, mfp); + n = ioc->req_sz/4 - 1; + while (mfp[n] == 0) + n--; + for (ii=0; ii<=n; ii++) { + if (ii && ((ii%8)==0)) + printk("\n"); + printk(" %08x", le32_to_cpu(mfp[ii])); + } + printk("\n"); +} + +static inline void +DBG_DUMP_FW_REQUEST_FRAME(MPT_ADAPTER *ioc, u32 *mfp) +{ + int i, n; + + if (!(ioc->debug_level & MPT_DEBUG_MSG_FRAME)) + return; + n = 10; + printk(KERN_INFO " "); + for (i = 0; i < n; i++) + printk(" %08x", le32_to_cpu(mfp[i])); + printk("\n"); +} + +static inline void +DBG_DUMP_REQUEST_FRAME(MPT_ADAPTER *ioc, u32 *mfp) +{ + int i, n; + + if (!(ioc->debug_level & MPT_DEBUG_MSG_FRAME)) + return; + n = 24; + for (i=0; idebug_level & MPT_DEBUG_MSG_FRAME)) + return; + n = (le32_to_cpu(mfp[0]) & 0x00FF0000) >> 16; + printk(KERN_INFO " "); + for (i=0; idebug_level & MPT_DEBUG_MSG_FRAME)) + return; + n = 3; + printk(KERN_INFO " "); + for (i=0; idebug_level & MPT_DEBUG_TM)) + return; + n = 13; + printk(KERN_DEBUG "TM_REQUEST:\n"); + for (i=0; idebug_level & MPT_DEBUG_TM)) + return; + n = (le32_to_cpu(mfp[0]) & 0x00FF0000) >> 16; + printk(KERN_DEBUG "TM_REPLY MessageLength=%d:\n", n); + for (i=0; i